diff options
Diffstat (limited to 'arch/arm/mach-omap2/prm_common.c')
| -rw-r--r-- | arch/arm/mach-omap2/prm_common.c | 817 |
1 files changed, 817 insertions, 0 deletions
diff --git a/arch/arm/mach-omap2/prm_common.c b/arch/arm/mach-omap2/prm_common.c new file mode 100644 index 000000000..7add7994d --- /dev/null +++ b/arch/arm/mach-omap2/prm_common.c @@ -0,0 +1,817 @@ +/* + * OMAP2+ common Power & Reset Management (PRM) IP block functions + * + * Copyright (C) 2011 Texas Instruments, Inc. + * Tero Kristo <t-kristo@ti.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * + * For historical purposes, the API used to configure the PRM + * interrupt handler refers to it as the "PRCM interrupt." The + * underlying registers are located in the PRM on OMAP3/4. + * + * XXX This code should eventually be moved to a PRM driver. + */ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/init.h> +#include <linux/io.h> +#include <linux/irq.h> +#include <linux/interrupt.h> +#include <linux/slab.h> +#include <linux/of.h> +#include <linux/of_address.h> +#include <linux/clk-provider.h> +#include <linux/clk/ti.h> + +#include "soc.h" +#include "prm2xxx_3xxx.h" +#include "prm2xxx.h" +#include "prm3xxx.h" +#include "prm33xx.h" +#include "prm44xx.h" +#include "prm54xx.h" +#include "prm7xx.h" +#include "prcm43xx.h" +#include "common.h" +#include "clock.h" +#include "cm.h" +#include "control.h" + +/* + * OMAP_PRCM_MAX_NR_PENDING_REG: maximum number of PRM_IRQ*_MPU regs + * XXX this is technically not needed, since + * omap_prcm_register_chain_handler() could allocate this based on the + * actual amount of memory needed for the SoC + */ +#define OMAP_PRCM_MAX_NR_PENDING_REG 2 + +/* + * prcm_irq_chips: an array of all of the "generic IRQ chips" in use + * by the PRCM interrupt handler code. There will be one 'chip' per + * PRM_{IRQSTATUS,IRQENABLE}_MPU register pair. (So OMAP3 will have + * one "chip" and OMAP4 will have two.) + */ +static struct irq_chip_generic **prcm_irq_chips; + +/* + * prcm_irq_setup: the PRCM IRQ parameters for the hardware the code + * is currently running on. Defined and passed by initialization code + * that calls omap_prcm_register_chain_handler(). + */ +static struct omap_prcm_irq_setup *prcm_irq_setup; + +/* prm_base: base virtual address of the PRM IP block */ +void __iomem *prm_base; + +u16 prm_features; + +/* + * prm_ll_data: function pointers to SoC-specific implementations of + * common PRM functions + */ +static struct prm_ll_data null_prm_ll_data; +static struct prm_ll_data *prm_ll_data = &null_prm_ll_data; + +/* Private functions */ + +/* + * Move priority events from events to priority_events array + */ +static void omap_prcm_events_filter_priority(unsigned long *events, + unsigned long *priority_events) +{ + int i; + + for (i = 0; i < prcm_irq_setup->nr_regs; i++) { + priority_events[i] = + events[i] & prcm_irq_setup->priority_mask[i]; + events[i] ^= priority_events[i]; + } +} + +/* + * PRCM Interrupt Handler + * + * This is a common handler for the OMAP PRCM interrupts. Pending + * interrupts are detected by a call to prcm_pending_events and + * dispatched accordingly. Clearing of the wakeup events should be + * done by the SoC specific individual handlers. + */ +static void omap_prcm_irq_handler(unsigned int irq, struct irq_desc *desc) +{ + unsigned long pending[OMAP_PRCM_MAX_NR_PENDING_REG]; + unsigned long priority_pending[OMAP_PRCM_MAX_NR_PENDING_REG]; + struct irq_chip *chip = irq_desc_get_chip(desc); + unsigned int virtirq; + int nr_irq = prcm_irq_setup->nr_regs * 32; + + /* + * If we are suspended, mask all interrupts from PRCM level, + * this does not ack them, and they will be pending until we + * re-enable the interrupts, at which point the + * omap_prcm_irq_handler will be executed again. The + * _save_and_clear_irqen() function must ensure that the PRM + * write to disable all IRQs has reached the PRM before + * returning, or spurious PRCM interrupts may occur during + * suspend. + */ + if (prcm_irq_setup->suspended) { + prcm_irq_setup->save_and_clear_irqen(prcm_irq_setup->saved_mask); + prcm_irq_setup->suspend_save_flag = true; + } + + /* + * Loop until all pending irqs are handled, since + * generic_handle_irq() can cause new irqs to come + */ + while (!prcm_irq_setup->suspended) { + prcm_irq_setup->read_pending_irqs(pending); + + /* No bit set, then all IRQs are handled */ + if (find_first_bit(pending, nr_irq) >= nr_irq) + break; + + omap_prcm_events_filter_priority(pending, priority_pending); + + /* + * Loop on all currently pending irqs so that new irqs + * cannot starve previously pending irqs + */ + + /* Serve priority events first */ + for_each_set_bit(virtirq, priority_pending, nr_irq) + generic_handle_irq(prcm_irq_setup->base_irq + virtirq); + + /* Serve normal events next */ + for_each_set_bit(virtirq, pending, nr_irq) + generic_handle_irq(prcm_irq_setup->base_irq + virtirq); + } + if (chip->irq_ack) + chip->irq_ack(&desc->irq_data); + if (chip->irq_eoi) + chip->irq_eoi(&desc->irq_data); + chip->irq_unmask(&desc->irq_data); + + prcm_irq_setup->ocp_barrier(); /* avoid spurious IRQs */ +} + +/* Public functions */ + +/** + * omap_prcm_event_to_irq - given a PRCM event name, returns the + * corresponding IRQ on which the handler should be registered + * @name: name of the PRCM interrupt bit to look up - see struct omap_prcm_irq + * + * Returns the Linux internal IRQ ID corresponding to @name upon success, + * or -ENOENT upon failure. + */ +int omap_prcm_event_to_irq(const char *name) +{ + int i; + + if (!prcm_irq_setup || !name) + return -ENOENT; + + for (i = 0; i < prcm_irq_setup->nr_irqs; i++) + if (!strcmp(prcm_irq_setup->irqs[i].name, name)) + return prcm_irq_setup->base_irq + + prcm_irq_setup->irqs[i].offset; + + return -ENOENT; +} + +/** + * omap_prcm_irq_cleanup - reverses memory allocated and other steps + * done by omap_prcm_register_chain_handler() + * + * No return value. + */ +void omap_prcm_irq_cleanup(void) +{ + unsigned int irq; + int i; + + if (!prcm_irq_setup) { + pr_err("PRCM: IRQ handler not initialized; cannot cleanup\n"); + return; + } + + if (prcm_irq_chips) { + for (i = 0; i < prcm_irq_setup->nr_regs; i++) { + if (prcm_irq_chips[i]) + irq_remove_generic_chip(prcm_irq_chips[i], + 0xffffffff, 0, 0); + prcm_irq_chips[i] = NULL; + } + kfree(prcm_irq_chips); + prcm_irq_chips = NULL; + } + + kfree(prcm_irq_setup->saved_mask); + prcm_irq_setup->saved_mask = NULL; + + kfree(prcm_irq_setup->priority_mask); + prcm_irq_setup->priority_mask = NULL; + + if (prcm_irq_setup->xlate_irq) + irq = prcm_irq_setup->xlate_irq(prcm_irq_setup->irq); + else + irq = prcm_irq_setup->irq; + irq_set_chained_handler(irq, NULL); + + if (prcm_irq_setup->base_irq > 0) + irq_free_descs(prcm_irq_setup->base_irq, + prcm_irq_setup->nr_regs * 32); + prcm_irq_setup->base_irq = 0; +} + +void omap_prcm_irq_prepare(void) +{ + prcm_irq_setup->suspended = true; +} + +void omap_prcm_irq_complete(void) +{ + prcm_irq_setup->suspended = false; + + /* If we have not saved the masks, do not attempt to restore */ + if (!prcm_irq_setup->suspend_save_flag) + return; + + prcm_irq_setup->suspend_save_flag = false; + + /* + * Re-enable all masked PRCM irq sources, this causes the PRCM + * interrupt to fire immediately if the events were masked + * previously in the chain handler + */ + prcm_irq_setup->restore_irqen(prcm_irq_setup->saved_mask); +} + +/** + * omap_prcm_register_chain_handler - initializes the prcm chained interrupt + * handler based on provided parameters + * @irq_setup: hardware data about the underlying PRM/PRCM + * + * Set up the PRCM chained interrupt handler on the PRCM IRQ. Sets up + * one generic IRQ chip per PRM interrupt status/enable register pair. + * Returns 0 upon success, -EINVAL if called twice or if invalid + * arguments are passed, or -ENOMEM on any other error. + */ +int omap_prcm_register_chain_handler(struct omap_prcm_irq_setup *irq_setup) +{ + int nr_regs; + u32 mask[OMAP_PRCM_MAX_NR_PENDING_REG]; + int offset, i; + struct irq_chip_generic *gc; + struct irq_chip_type *ct; + unsigned int irq; + + if (!irq_setup) + return -EINVAL; + + nr_regs = irq_setup->nr_regs; + + if (prcm_irq_setup) { + pr_err("PRCM: already initialized; won't reinitialize\n"); + return -EINVAL; + } + + if (nr_regs > OMAP_PRCM_MAX_NR_PENDING_REG) { + pr_err("PRCM: nr_regs too large\n"); + return -EINVAL; + } + + prcm_irq_setup = irq_setup; + + prcm_irq_chips = kzalloc(sizeof(void *) * nr_regs, GFP_KERNEL); + prcm_irq_setup->saved_mask = kzalloc(sizeof(u32) * nr_regs, GFP_KERNEL); + prcm_irq_setup->priority_mask = kzalloc(sizeof(u32) * nr_regs, + GFP_KERNEL); + + if (!prcm_irq_chips || !prcm_irq_setup->saved_mask || + !prcm_irq_setup->priority_mask) { + pr_err("PRCM: kzalloc failed\n"); + goto err; + } + + memset(mask, 0, sizeof(mask)); + + for (i = 0; i < irq_setup->nr_irqs; i++) { + offset = irq_setup->irqs[i].offset; + mask[offset >> 5] |= 1 << (offset & 0x1f); + if (irq_setup->irqs[i].priority) + irq_setup->priority_mask[offset >> 5] |= + 1 << (offset & 0x1f); + } + + if (irq_setup->xlate_irq) + irq = irq_setup->xlate_irq(irq_setup->irq); + else + irq = irq_setup->irq; + irq_set_chained_handler(irq, omap_prcm_irq_handler); + + irq_setup->base_irq = irq_alloc_descs(-1, 0, irq_setup->nr_regs * 32, + 0); + + if (irq_setup->base_irq < 0) { + pr_err("PRCM: failed to allocate irq descs: %d\n", + irq_setup->base_irq); + goto err; + } + + for (i = 0; i < irq_setup->nr_regs; i++) { + gc = irq_alloc_generic_chip("PRCM", 1, + irq_setup->base_irq + i * 32, prm_base, + handle_level_irq); + + if (!gc) { + pr_err("PRCM: failed to allocate generic chip\n"); + goto err; + } + ct = gc->chip_types; + ct->chip.irq_ack = irq_gc_ack_set_bit; + ct->chip.irq_mask = irq_gc_mask_clr_bit; + ct->chip.irq_unmask = irq_gc_mask_set_bit; + + ct->regs.ack = irq_setup->ack + i * 4; + ct->regs.mask = irq_setup->mask + i * 4; + + irq_setup_generic_chip(gc, mask[i], 0, IRQ_NOREQUEST, 0); + prcm_irq_chips[i] = gc; + } + + if (of_have_populated_dt()) { + int irq = omap_prcm_event_to_irq("io"); + omap_pcs_legacy_init(irq, irq_setup->reconfigure_io_chain); + } + + return 0; + +err: + omap_prcm_irq_cleanup(); + return -ENOMEM; +} + +/** + * omap2_set_globals_prm - set the PRM base address (for early use) + * @prm: PRM base virtual address + * + * XXX Will be replaced when the PRM/CM drivers are completed. + */ +void __init omap2_set_globals_prm(void __iomem *prm) +{ + prm_base = prm; +} + +/** + * prm_read_reset_sources - return the sources of the SoC's last reset + * + * Return a u32 bitmask representing the reset sources that caused the + * SoC to reset. The low-level per-SoC functions called by this + * function remap the SoC-specific reset source bits into an + * OMAP-common set of reset source bits, defined in + * arch/arm/mach-omap2/prm.h. Returns the standardized reset source + * u32 bitmask from the hardware upon success, or returns (1 << + * OMAP_UNKNOWN_RST_SRC_ID_SHIFT) if no low-level read_reset_sources() + * function was registered. + */ +u32 prm_read_reset_sources(void) +{ + u32 ret = 1 << OMAP_UNKNOWN_RST_SRC_ID_SHIFT; + + if (prm_ll_data->read_reset_sources) + ret = prm_ll_data->read_reset_sources(); + else + WARN_ONCE(1, "prm: %s: no mapping function defined for reset sources\n", __func__); + + return ret; +} + +/** + * prm_was_any_context_lost_old - was device context lost? (old API) + * @part: PRM partition ID (e.g., OMAP4430_PRM_PARTITION) + * @inst: PRM instance offset (e.g., OMAP4430_PRM_MPU_INST) + * @idx: CONTEXT register offset + * + * Return 1 if any bits were set in the *_CONTEXT_* register + * identified by (@part, @inst, @idx), which means that some context + * was lost for that module; otherwise, return 0. XXX Deprecated; + * callers need to use a less-SoC-dependent way to identify hardware + * IP blocks. + */ +bool prm_was_any_context_lost_old(u8 part, s16 inst, u16 idx) +{ + bool ret = true; + + if (prm_ll_data->was_any_context_lost_old) + ret = prm_ll_data->was_any_context_lost_old(part, inst, idx); + else + WARN_ONCE(1, "prm: %s: no mapping function defined\n", + __func__); + + return ret; +} + +/** + * prm_clear_context_lost_flags_old - clear context loss flags (old API) + * @part: PRM partition ID (e.g., OMAP4430_PRM_PARTITION) + * @inst: PRM instance offset (e.g., OMAP4430_PRM_MPU_INST) + * @idx: CONTEXT register offset + * + * Clear hardware context loss bits for the module identified by + * (@part, @inst, @idx). No return value. XXX Deprecated; callers + * need to use a less-SoC-dependent way to identify hardware IP + * blocks. + */ +void prm_clear_context_loss_flags_old(u8 part, s16 inst, u16 idx) +{ + if (prm_ll_data->clear_context_loss_flags_old) + prm_ll_data->clear_context_loss_flags_old(part, inst, idx); + else + WARN_ONCE(1, "prm: %s: no mapping function defined\n", + __func__); +} + +/** + * omap_prm_assert_hardreset - assert hardreset for an IP block + * @shift: register bit shift corresponding to the reset line + * @part: PRM partition + * @prm_mod: PRM submodule base or instance offset + * @offset: register offset + * + * Asserts a hardware reset line for an IP block. + */ +int omap_prm_assert_hardreset(u8 shift, u8 part, s16 prm_mod, u16 offset) +{ + if (!prm_ll_data->assert_hardreset) { + WARN_ONCE(1, "prm: %s: no mapping function defined\n", + __func__); + return -EINVAL; + } + + return prm_ll_data->assert_hardreset(shift, part, prm_mod, offset); +} + +/** + * omap_prm_deassert_hardreset - deassert hardreset for an IP block + * @shift: register bit shift corresponding to the reset line + * @st_shift: reset status bit shift corresponding to the reset line + * @part: PRM partition + * @prm_mod: PRM submodule base or instance offset + * @offset: register offset + * @st_offset: status register offset + * + * Deasserts a hardware reset line for an IP block. + */ +int omap_prm_deassert_hardreset(u8 shift, u8 st_shift, u8 part, s16 prm_mod, + u16 offset, u16 st_offset) +{ + if (!prm_ll_data->deassert_hardreset) { + WARN_ONCE(1, "prm: %s: no mapping function defined\n", + __func__); + return -EINVAL; + } + + return prm_ll_data->deassert_hardreset(shift, st_shift, part, prm_mod, + offset, st_offset); +} + +/** + * omap_prm_is_hardreset_asserted - check the hardreset status for an IP block + * @shift: register bit shift corresponding to the reset line + * @part: PRM partition + * @prm_mod: PRM submodule base or instance offset + * @offset: register offset + * + * Checks if a hardware reset line for an IP block is enabled or not. + */ +int omap_prm_is_hardreset_asserted(u8 shift, u8 part, s16 prm_mod, u16 offset) +{ + if (!prm_ll_data->is_hardreset_asserted) { + WARN_ONCE(1, "prm: %s: no mapping function defined\n", + __func__); + return -EINVAL; + } + + return prm_ll_data->is_hardreset_asserted(shift, part, prm_mod, offset); +} + +/** + * omap_prm_reconfigure_io_chain - clear latches and reconfigure I/O chain + * + * Clear any previously-latched I/O wakeup events and ensure that the + * I/O wakeup gates are aligned with the current mux settings. + * Calls SoC specific I/O chain reconfigure function if available, + * otherwise does nothing. + */ +void omap_prm_reconfigure_io_chain(void) +{ + if (!prcm_irq_setup || !prcm_irq_setup->reconfigure_io_chain) + return; + + prcm_irq_setup->reconfigure_io_chain(); +} + +/** + * omap_prm_reset_system - trigger global SW reset + * + * Triggers SoC specific global warm reset to reboot the device. + */ +void omap_prm_reset_system(void) +{ + if (!prm_ll_data->reset_system) { + WARN_ONCE(1, "prm: %s: no mapping function defined\n", + __func__); + return; + } + + prm_ll_data->reset_system(); + + while (1) + cpu_relax(); +} + +/** + * omap_prm_clear_mod_irqs - clear wake-up events from PRCM interrupt + * @module: PRM module to clear wakeups from + * @regs: register to clear + * @wkst_mask: wkst bits to clear + * + * Clears any wakeup events for the module and register set defined. + * Uses SoC specific implementation to do the actual wakeup status + * clearing. + */ +int omap_prm_clear_mod_irqs(s16 module, u8 regs, u32 wkst_mask) +{ + if (!prm_ll_data->clear_mod_irqs) { + WARN_ONCE(1, "prm: %s: no mapping function defined\n", + __func__); + return -EINVAL; + } + + return prm_ll_data->clear_mod_irqs(module, regs, wkst_mask); +} + +/** + * omap_prm_vp_check_txdone - check voltage processor TX done status + * + * Checks if voltage processor transmission has been completed. + * Returns non-zero if a transmission has completed, 0 otherwise. + */ +u32 omap_prm_vp_check_txdone(u8 vp_id) +{ + if (!prm_ll_data->vp_check_txdone) { + WARN_ONCE(1, "prm: %s: no mapping function defined\n", + __func__); + return 0; + } + + return prm_ll_data->vp_check_txdone(vp_id); +} + +/** + * omap_prm_vp_clear_txdone - clears voltage processor TX done status + * + * Clears the status bit for completed voltage processor transmission + * returned by prm_vp_check_txdone. + */ +void omap_prm_vp_clear_txdone(u8 vp_id) +{ + if (!prm_ll_data->vp_clear_txdone) { + WARN_ONCE(1, "prm: %s: no mapping function defined\n", + __func__); + return; + } + + prm_ll_data->vp_clear_txdone(vp_id); +} + +/** + * prm_register - register per-SoC low-level data with the PRM + * @pld: low-level per-SoC OMAP PRM data & function pointers to register + * + * Register per-SoC low-level OMAP PRM data and function pointers with + * the OMAP PRM common interface. The caller must keep the data + * pointed to by @pld valid until it calls prm_unregister() and + * it returns successfully. Returns 0 upon success, -EINVAL if @pld + * is NULL, or -EEXIST if prm_register() has already been called + * without an intervening prm_unregister(). + */ +int prm_register(struct prm_ll_data *pld) +{ + if (!pld) + return -EINVAL; + + if (prm_ll_data != &null_prm_ll_data) + return -EEXIST; + + prm_ll_data = pld; + + return 0; +} + +/** + * prm_unregister - unregister per-SoC low-level data & function pointers + * @pld: low-level per-SoC OMAP PRM data & function pointers to unregister + * + * Unregister per-SoC low-level OMAP PRM data and function pointers + * that were previously registered with prm_register(). The + * caller may not destroy any of the data pointed to by @pld until + * this function returns successfully. Returns 0 upon success, or + * -EINVAL if @pld is NULL or if @pld does not match the struct + * prm_ll_data * previously registered by prm_register(). + */ +int prm_unregister(struct prm_ll_data *pld) +{ + if (!pld || prm_ll_data != pld) + return -EINVAL; + + prm_ll_data = &null_prm_ll_data; + + return 0; +} + +#ifdef CONFIG_ARCH_OMAP2 +static struct omap_prcm_init_data omap2_prm_data __initdata = { + .index = TI_CLKM_PRM, + .init = omap2xxx_prm_init, +}; +#endif + +#ifdef CONFIG_ARCH_OMAP3 +static struct omap_prcm_init_data omap3_prm_data __initdata = { + .index = TI_CLKM_PRM, + .init = omap3xxx_prm_init, + + /* + * IVA2 offset is a negative value, must offset the prm_base + * address by this to get it to positive + */ + .offset = -OMAP3430_IVA2_MOD, +}; +#endif + +#if defined(CONFIG_SOC_AM33XX) || defined(CONFIG_SOC_TI81XX) +static struct omap_prcm_init_data am3_prm_data __initdata = { + .index = TI_CLKM_PRM, + .init = am33xx_prm_init, +}; +#endif + +#ifdef CONFIG_ARCH_OMAP4 +static struct omap_prcm_init_data omap4_prm_data __initdata = { + .index = TI_CLKM_PRM, + .init = omap44xx_prm_init, + .device_inst_offset = OMAP4430_PRM_DEVICE_INST, + .flags = PRM_HAS_IO_WAKEUP | PRM_HAS_VOLTAGE | PRM_IRQ_DEFAULT, +}; +#endif + +#ifdef CONFIG_SOC_OMAP5 +static struct omap_prcm_init_data omap5_prm_data __initdata = { + .index = TI_CLKM_PRM, + .init = omap44xx_prm_init, + .device_inst_offset = OMAP54XX_PRM_DEVICE_INST, + .flags = PRM_HAS_IO_WAKEUP | PRM_HAS_VOLTAGE, +}; +#endif + +#ifdef CONFIG_SOC_DRA7XX +static struct omap_prcm_init_data dra7_prm_data __initdata = { + .index = TI_CLKM_PRM, + .init = omap44xx_prm_init, + .device_inst_offset = DRA7XX_PRM_DEVICE_INST, + .flags = PRM_HAS_IO_WAKEUP, +}; +#endif + +#ifdef CONFIG_SOC_AM43XX +static struct omap_prcm_init_data am4_prm_data __initdata = { + .index = TI_CLKM_PRM, + .init = omap44xx_prm_init, + .device_inst_offset = AM43XX_PRM_DEVICE_INST, +}; +#endif + +#if defined(CONFIG_ARCH_OMAP4) || defined(CONFIG_SOC_OMAP5) +static struct omap_prcm_init_data scrm_data __initdata = { + .index = TI_CLKM_SCRM, +}; +#endif + +static const struct of_device_id omap_prcm_dt_match_table[] __initconst = { +#ifdef CONFIG_SOC_AM33XX + { .compatible = "ti,am3-prcm", .data = &am3_prm_data }, +#endif +#ifdef CONFIG_SOC_AM43XX + { .compatible = "ti,am4-prcm", .data = &am4_prm_data }, +#endif +#ifdef CONFIG_SOC_TI81XX + { .compatible = "ti,dm814-prcm", .data = &am3_prm_data }, + { .compatible = "ti,dm816-prcm", .data = &am3_prm_data }, +#endif +#ifdef CONFIG_ARCH_OMAP2 + { .compatible = "ti,omap2-prcm", .data = &omap2_prm_data }, +#endif +#ifdef CONFIG_ARCH_OMAP3 + { .compatible = "ti,omap3-prm", .data = &omap3_prm_data }, +#endif +#ifdef CONFIG_ARCH_OMAP4 + { .compatible = "ti,omap4-prm", .data = &omap4_prm_data }, + { .compatible = "ti,omap4-scrm", .data = &scrm_data }, +#endif +#ifdef CONFIG_SOC_OMAP5 + { .compatible = "ti,omap5-prm", .data = &omap5_prm_data }, + { .compatible = "ti,omap5-scrm", .data = &scrm_data }, +#endif +#ifdef CONFIG_SOC_DRA7XX + { .compatible = "ti,dra7-prm", .data = &dra7_prm_data }, +#endif + { } +}; + +/** + * omap2_prm_base_init - initialize iomappings for the PRM driver + * + * Detects and initializes the iomappings for the PRM driver, based + * on the DT data. Returns 0 in success, negative error value + * otherwise. + */ +int __init omap2_prm_base_init(void) +{ + struct device_node *np; + const struct of_device_id *match; + struct omap_prcm_init_data *data; + void __iomem *mem; + + for_each_matching_node_and_match(np, omap_prcm_dt_match_table, &match) { + data = (struct omap_prcm_init_data *)match->data; + + mem = of_iomap(np, 0); + if (!mem) + return -ENOMEM; + + if (data->index == TI_CLKM_PRM) + prm_base = mem + data->offset; + + data->mem = mem; + + data->np = np; + + if (data->init) + data->init(data); + } + + return 0; +} + +int __init omap2_prcm_base_init(void) +{ + int ret; + + ret = omap2_prm_base_init(); + if (ret) + return ret; + + return omap2_cm_base_init(); +} + +/** + * omap_prcm_init - low level init for the PRCM drivers + * + * Initializes the low level clock infrastructure for PRCM drivers. + * Returns 0 in success, negative error value in failure. + */ +int __init omap_prcm_init(void) +{ + struct device_node *np; + const struct of_device_id *match; + const struct omap_prcm_init_data *data; + int ret; + + for_each_matching_node_and_match(np, omap_prcm_dt_match_table, &match) { + data = match->data; + + ret = omap2_clk_provider_init(np, data->index, NULL, data->mem); + if (ret) + return ret; + } + + omap_cm_init(); + + return 0; +} + +static int __init prm_late_init(void) +{ + if (prm_ll_data->late_init) + return prm_ll_data->late_init(); + return 0; +} +subsys_initcall(prm_late_init); |