diff options
Diffstat (limited to 'arch/arm/mach-omap2')
36 files changed, 281 insertions, 2160 deletions
diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig index 6468f15f0..4a023e8d1 100644 --- a/arch/arm/mach-omap2/Kconfig +++ b/arch/arm/mach-omap2/Kconfig @@ -60,6 +60,7 @@ config SOC_AM43XX select ARM_GIC select MACH_OMAP_GENERIC select MIGHT_HAVE_CACHE_L2X0 + select HAVE_ARM_SCU config SOC_DRA7XX bool "TI DRA7XX" @@ -171,12 +172,6 @@ config MACH_OMAP2_TUSB6010 depends on ARCH_OMAP2 && SOC_OMAP2420 default y if MACH_NOKIA_N8X0 -config MACH_OMAP3_BEAGLE - bool "OMAP3 BEAGLE board" - depends on ARCH_OMAP3 - default y - select OMAP_PACKAGE_CBB - config MACH_OMAP_LDP bool "OMAP3 LDP board" depends on ARCH_OMAP3 @@ -203,12 +198,6 @@ config MACH_OMAP3_TORPEDO for full description please see the products webpage at http://www.logicpd.com/products/development-kits/zoom-omap35x-torpedo-development-kit -config MACH_OVERO - bool "Gumstix Overo board" - depends on ARCH_OMAP3 - default y - select OMAP_PACKAGE_CBB - config MACH_OMAP3517EVM bool "OMAP3517/ AM3517 EVM board" depends on ARCH_OMAP3 @@ -240,16 +229,6 @@ config MACH_NOKIA_RX51 default y select OMAP_PACKAGE_CBB -config MACH_CM_T35 - bool "CompuLab CM-T35/CM-T3730 modules" - depends on ARCH_OMAP3 - default y - select MACH_CM_T3730 - select OMAP_PACKAGE_CUS - -config MACH_CM_T3730 - bool - config OMAP3_SDRC_AC_TIMING bool "Enable SDRC AC timing register changes" depends on ARCH_OMAP3 diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile index ec002bd4a..903c85be2 100644 --- a/arch/arm/mach-omap2/Makefile +++ b/arch/arm/mach-omap2/Makefile @@ -242,17 +242,14 @@ obj-$(CONFIG_SOC_OMAP2420) += msdi.o # Specific board support obj-$(CONFIG_MACH_OMAP_GENERIC) += board-generic.o pdata-quirks.o -obj-$(CONFIG_MACH_OMAP3_BEAGLE) += board-omap3beagle.o obj-$(CONFIG_MACH_OMAP_LDP) += board-ldp.o obj-$(CONFIG_MACH_OMAP3530_LV_SOM) += board-omap3logic.o obj-$(CONFIG_MACH_OMAP3_TORPEDO) += board-omap3logic.o -obj-$(CONFIG_MACH_OVERO) += board-overo.o obj-$(CONFIG_MACH_OMAP3_PANDORA) += board-omap3pandora.o obj-$(CONFIG_MACH_NOKIA_N8X0) += board-n8x0.o obj-$(CONFIG_MACH_NOKIA_RX51) += board-rx51.o sdram-nokia.o obj-$(CONFIG_MACH_NOKIA_RX51) += board-rx51-peripherals.o obj-$(CONFIG_MACH_NOKIA_RX51) += board-rx51-video.o -obj-$(CONFIG_MACH_CM_T35) += board-cm-t35.o # Platform specific device init code @@ -277,8 +274,5 @@ obj-y += $(nand-m) $(nand-y) smsc911x-$(CONFIG_SMSC911X) := gpmc-smsc911x.o obj-y += $(smsc911x-m) $(smsc911x-y) -ifneq ($(CONFIG_HWSPINLOCK_OMAP),) -obj-y += hwspinlock.o -endif obj-y += common-board-devices.o twl-common.o dss-common.o diff --git a/arch/arm/mach-omap2/board-cm-t35.c b/arch/arm/mach-omap2/board-cm-t35.c deleted file mode 100644 index b5dfbc1b1..000000000 --- a/arch/arm/mach-omap2/board-cm-t35.c +++ /dev/null @@ -1,769 +0,0 @@ -/* - * CompuLab CM-T35/CM-T3730 modules support - * - * Copyright (C) 2009-2011 CompuLab, Ltd. - * Authors: Mike Rapoport <mike@compulab.co.il> - * Igor Grinberg <grinberg@compulab.co.il> - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * version 2 as published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - */ - -#include <linux/clk-provider.h> -#include <linux/clkdev.h> -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/platform_device.h> -#include <linux/input.h> -#include <linux/input/matrix_keypad.h> -#include <linux/delay.h> -#include <linux/gpio.h> -#include <linux/omap-gpmc.h> -#include <linux/platform_data/gpio-omap.h> - -#include <linux/platform_data/at24.h> -#include <linux/i2c/twl.h> -#include <linux/regulator/fixed.h> -#include <linux/regulator/machine.h> -#include <linux/mmc/host.h> -#include <linux/usb/phy.h> - -#include <linux/spi/spi.h> -#include <linux/spi/tdo24m.h> - -#include <asm/mach-types.h> -#include <asm/mach/arch.h> -#include <asm/mach/map.h> - -#include <linux/platform_data/mtd-nand-omap2.h> -#include <video/omapdss.h> -#include <video/omap-panel-data.h> -#include <linux/platform_data/spi-omap2-mcspi.h> - -#include "common.h" -#include "mux.h" -#include "sdram-micron-mt46h32m32lf-6.h" -#include "hsmmc.h" -#include "common-board-devices.h" - -#define CM_T35_GPIO_PENDOWN 57 -#define SB_T35_USB_HUB_RESET_GPIO 167 - -#define CM_T35_SMSC911X_CS 5 -#define CM_T35_SMSC911X_GPIO 163 -#define SB_T35_SMSC911X_CS 4 -#define SB_T35_SMSC911X_GPIO 65 - -#if defined(CONFIG_SMSC911X) || defined(CONFIG_SMSC911X_MODULE) -#include <linux/smsc911x.h> -#include "gpmc-smsc911x.h" - -static struct omap_smsc911x_platform_data cm_t35_smsc911x_cfg = { - .id = 0, - .cs = CM_T35_SMSC911X_CS, - .gpio_irq = CM_T35_SMSC911X_GPIO, - .gpio_reset = -EINVAL, - .flags = SMSC911X_USE_32BIT | SMSC911X_SAVE_MAC_ADDRESS, -}; - -static struct omap_smsc911x_platform_data sb_t35_smsc911x_cfg = { - .id = 1, - .cs = SB_T35_SMSC911X_CS, - .gpio_irq = SB_T35_SMSC911X_GPIO, - .gpio_reset = -EINVAL, - .flags = SMSC911X_USE_32BIT | SMSC911X_SAVE_MAC_ADDRESS, -}; - -static struct regulator_consumer_supply cm_t35_smsc911x_supplies[] = { - REGULATOR_SUPPLY("vddvario", "smsc911x.0"), - REGULATOR_SUPPLY("vdd33a", "smsc911x.0"), -}; - -static struct regulator_consumer_supply sb_t35_smsc911x_supplies[] = { - REGULATOR_SUPPLY("vddvario", "smsc911x.1"), - REGULATOR_SUPPLY("vdd33a", "smsc911x.1"), -}; - -static void __init cm_t35_init_ethernet(void) -{ - regulator_register_fixed(0, cm_t35_smsc911x_supplies, - ARRAY_SIZE(cm_t35_smsc911x_supplies)); - regulator_register_fixed(1, sb_t35_smsc911x_supplies, - ARRAY_SIZE(sb_t35_smsc911x_supplies)); - - gpmc_smsc911x_init(&cm_t35_smsc911x_cfg); - gpmc_smsc911x_init(&sb_t35_smsc911x_cfg); -} -#else -static inline void __init cm_t35_init_ethernet(void) { return; } -#endif - -#if defined(CONFIG_LEDS_GPIO) || defined(CONFIG_LEDS_GPIO_MODULE) -#include <linux/leds.h> - -static struct gpio_led cm_t35_leds[] = { - [0] = { - .gpio = 186, - .name = "cm-t35:green", - .default_trigger = "heartbeat", - .active_low = 0, - }, -}; - -static struct gpio_led_platform_data cm_t35_led_pdata = { - .num_leds = ARRAY_SIZE(cm_t35_leds), - .leds = cm_t35_leds, -}; - -static struct platform_device cm_t35_led_device = { - .name = "leds-gpio", - .id = -1, - .dev = { - .platform_data = &cm_t35_led_pdata, - }, -}; - -static void __init cm_t35_init_led(void) -{ - platform_device_register(&cm_t35_led_device); -} -#else -static inline void cm_t35_init_led(void) {} -#endif - -#if defined(CONFIG_MTD_NAND_OMAP2) || defined(CONFIG_MTD_NAND_OMAP2_MODULE) -#include <linux/mtd/mtd.h> -#include <linux/mtd/nand.h> -#include <linux/mtd/partitions.h> - -static struct mtd_partition cm_t35_nand_partitions[] = { - { - .name = "xloader", - .offset = 0, /* Offset = 0x00000 */ - .size = 4 * NAND_BLOCK_SIZE, - .mask_flags = MTD_WRITEABLE - }, - { - .name = "uboot", - .offset = MTDPART_OFS_APPEND, /* Offset = 0x80000 */ - .size = 15 * NAND_BLOCK_SIZE, - }, - { - .name = "uboot environment", - .offset = MTDPART_OFS_APPEND, /* Offset = 0x260000 */ - .size = 2 * NAND_BLOCK_SIZE, - }, - { - .name = "linux", - .offset = MTDPART_OFS_APPEND, /* Offset = 0x2A0000 */ - .size = 32 * NAND_BLOCK_SIZE, - }, - { - .name = "rootfs", - .offset = MTDPART_OFS_APPEND, /* Offset = 0x6A0000 */ - .size = MTDPART_SIZ_FULL, - }, -}; - -static struct omap_nand_platform_data cm_t35_nand_data = { - .parts = cm_t35_nand_partitions, - .nr_parts = ARRAY_SIZE(cm_t35_nand_partitions), - .cs = 0, -}; - -static void __init cm_t35_init_nand(void) -{ - if (gpmc_nand_init(&cm_t35_nand_data, NULL) < 0) - pr_err("CM-T35: Unable to register NAND device\n"); -} -#else -static inline void cm_t35_init_nand(void) {} -#endif - -#define CM_T35_LCD_EN_GPIO 157 -#define CM_T35_LCD_BL_GPIO 58 -#define CM_T35_DVI_EN_GPIO 54 - -static const struct display_timing cm_t35_lcd_videomode = { - .pixelclock = { 0, 26000000, 0 }, - - .hactive = { 0, 480, 0 }, - .hfront_porch = { 0, 104, 0 }, - .hback_porch = { 0, 8, 0 }, - .hsync_len = { 0, 8, 0 }, - - .vactive = { 0, 640, 0 }, - .vfront_porch = { 0, 4, 0 }, - .vback_porch = { 0, 2, 0 }, - .vsync_len = { 0, 2, 0 }, - - .flags = DISPLAY_FLAGS_HSYNC_LOW | DISPLAY_FLAGS_VSYNC_LOW | - DISPLAY_FLAGS_DE_HIGH | DISPLAY_FLAGS_PIXDATA_NEGEDGE, -}; - -static struct panel_dpi_platform_data cm_t35_lcd_pdata = { - .name = "lcd", - .source = "dpi.0", - - .data_lines = 18, - - .display_timing = &cm_t35_lcd_videomode, - - .enable_gpio = -1, - .backlight_gpio = CM_T35_LCD_BL_GPIO, -}; - -static struct platform_device cm_t35_lcd_device = { - .name = "panel-dpi", - .id = 0, - .dev.platform_data = &cm_t35_lcd_pdata, -}; - -static struct connector_dvi_platform_data cm_t35_dvi_connector_pdata = { - .name = "dvi", - .source = "tfp410.0", - .i2c_bus_num = -1, -}; - -static struct platform_device cm_t35_dvi_connector_device = { - .name = "connector-dvi", - .id = 0, - .dev.platform_data = &cm_t35_dvi_connector_pdata, -}; - -static struct encoder_tfp410_platform_data cm_t35_tfp410_pdata = { - .name = "tfp410.0", - .source = "dpi.0", - .data_lines = 24, - .power_down_gpio = CM_T35_DVI_EN_GPIO, -}; - -static struct platform_device cm_t35_tfp410_device = { - .name = "tfp410", - .id = 0, - .dev.platform_data = &cm_t35_tfp410_pdata, -}; - -static struct connector_atv_platform_data cm_t35_tv_pdata = { - .name = "tv", - .source = "venc.0", - .connector_type = OMAP_DSS_VENC_TYPE_SVIDEO, - .invert_polarity = false, -}; - -static struct platform_device cm_t35_tv_connector_device = { - .name = "connector-analog-tv", - .id = 0, - .dev.platform_data = &cm_t35_tv_pdata, -}; - -static struct omap_dss_board_info cm_t35_dss_data = { - .default_display_name = "dvi", -}; - -static struct omap2_mcspi_device_config tdo24m_mcspi_config = { - .turbo_mode = 0, -}; - -static struct tdo24m_platform_data tdo24m_config = { - .model = TDO35S, -}; - -static struct spi_board_info cm_t35_lcd_spi_board_info[] __initdata = { - { - .modalias = "tdo24m", - .bus_num = 4, - .chip_select = 0, - .max_speed_hz = 1000000, - .controller_data = &tdo24m_mcspi_config, - .platform_data = &tdo24m_config, - }, -}; - -static void __init cm_t35_init_display(void) -{ - int err; - - spi_register_board_info(cm_t35_lcd_spi_board_info, - ARRAY_SIZE(cm_t35_lcd_spi_board_info)); - - - err = gpio_request_one(CM_T35_LCD_EN_GPIO, GPIOF_OUT_INIT_LOW, - "lcd bl enable"); - if (err) { - pr_err("CM-T35: failed to request LCD EN GPIO\n"); - return; - } - - msleep(50); - gpio_set_value(CM_T35_LCD_EN_GPIO, 1); - - err = omap_display_init(&cm_t35_dss_data); - if (err) { - pr_err("CM-T35: failed to register DSS device\n"); - gpio_free(CM_T35_LCD_EN_GPIO); - } - - platform_device_register(&cm_t35_tfp410_device); - platform_device_register(&cm_t35_dvi_connector_device); - platform_device_register(&cm_t35_lcd_device); - platform_device_register(&cm_t35_tv_connector_device); -} - -static struct regulator_consumer_supply cm_t35_vmmc1_supply[] = { - REGULATOR_SUPPLY("vmmc", "omap_hsmmc.0"), -}; - -static struct regulator_consumer_supply cm_t35_vsim_supply[] = { - REGULATOR_SUPPLY("vmmc_aux", "omap_hsmmc.0"), -}; - -static struct regulator_consumer_supply cm_t35_vio_supplies[] = { - REGULATOR_SUPPLY("vcc", "spi1.0"), - REGULATOR_SUPPLY("vdds_dsi", "omapdss"), - REGULATOR_SUPPLY("vdds_dsi", "omapdss_dpi.0"), - REGULATOR_SUPPLY("vdds_dsi", "omapdss_dsi.0"), -}; - -/* VMMC1 for MMC1 pins CMD, CLK, DAT0..DAT3 (20 mA, plus card == max 220 mA) */ -static struct regulator_init_data cm_t35_vmmc1 = { - .constraints = { - .min_uV = 1850000, - .max_uV = 3150000, - .valid_modes_mask = REGULATOR_MODE_NORMAL - | REGULATOR_MODE_STANDBY, - .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE - | REGULATOR_CHANGE_MODE - | REGULATOR_CHANGE_STATUS, - }, - .num_consumer_supplies = ARRAY_SIZE(cm_t35_vmmc1_supply), - .consumer_supplies = cm_t35_vmmc1_supply, -}; - -/* VSIM for MMC1 pins DAT4..DAT7 (2 mA, plus card == max 50 mA) */ -static struct regulator_init_data cm_t35_vsim = { - .constraints = { - .min_uV = 1800000, - .max_uV = 3000000, - .valid_modes_mask = REGULATOR_MODE_NORMAL - | REGULATOR_MODE_STANDBY, - .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE - | REGULATOR_CHANGE_MODE - | REGULATOR_CHANGE_STATUS, - }, - .num_consumer_supplies = ARRAY_SIZE(cm_t35_vsim_supply), - .consumer_supplies = cm_t35_vsim_supply, -}; - -static struct regulator_init_data cm_t35_vio = { - .constraints = { - .min_uV = 1800000, - .max_uV = 1800000, - .apply_uV = true, - .valid_modes_mask = REGULATOR_MODE_NORMAL - | REGULATOR_MODE_STANDBY, - .valid_ops_mask = REGULATOR_CHANGE_MODE, - }, - .num_consumer_supplies = ARRAY_SIZE(cm_t35_vio_supplies), - .consumer_supplies = cm_t35_vio_supplies, -}; - -static uint32_t cm_t35_keymap[] = { - KEY(0, 0, KEY_A), KEY(0, 1, KEY_B), KEY(0, 2, KEY_LEFT), - KEY(1, 0, KEY_UP), KEY(1, 1, KEY_ENTER), KEY(1, 2, KEY_DOWN), - KEY(2, 0, KEY_RIGHT), KEY(2, 1, KEY_C), KEY(2, 2, KEY_D), -}; - -static struct matrix_keymap_data cm_t35_keymap_data = { - .keymap = cm_t35_keymap, - .keymap_size = ARRAY_SIZE(cm_t35_keymap), -}; - -static struct twl4030_keypad_data cm_t35_kp_data = { - .keymap_data = &cm_t35_keymap_data, - .rows = 3, - .cols = 3, - .rep = 1, -}; - -static struct omap2_hsmmc_info mmc[] = { - { - .mmc = 1, - .caps = MMC_CAP_4_BIT_DATA, - .gpio_cd = -EINVAL, - .gpio_wp = -EINVAL, - .deferred = true, - }, - { - .mmc = 2, - .caps = MMC_CAP_4_BIT_DATA, - .transceiver = 1, - .gpio_cd = -EINVAL, - .gpio_wp = -EINVAL, - .ocr_mask = 0x00100000, /* 3.3V */ - }, - {} /* Terminator */ -}; - -static struct usbhs_phy_data phy_data[] __initdata = { - { - .port = 1, - .reset_gpio = OMAP_MAX_GPIO_LINES + 6, - .vcc_gpio = -EINVAL, - }, - { - .port = 2, - .reset_gpio = OMAP_MAX_GPIO_LINES + 7, - .vcc_gpio = -EINVAL, - }, -}; - -static struct usbhs_omap_platform_data usbhs_bdata __initdata = { - .port_mode[0] = OMAP_EHCI_PORT_MODE_PHY, - .port_mode[1] = OMAP_EHCI_PORT_MODE_PHY, -}; - -static void __init cm_t35_init_usbh(void) -{ - int err; - - err = gpio_request_one(SB_T35_USB_HUB_RESET_GPIO, - GPIOF_OUT_INIT_LOW, "usb hub rst"); - if (err) { - pr_err("SB-T35: usb hub rst gpio request failed: %d\n", err); - } else { - udelay(10); - gpio_set_value(SB_T35_USB_HUB_RESET_GPIO, 1); - msleep(1); - } - - usbhs_init_phys(phy_data, ARRAY_SIZE(phy_data)); - usbhs_init(&usbhs_bdata); -} - -static int cm_t35_twl_gpio_setup(struct device *dev, unsigned gpio, - unsigned ngpio) -{ - int wlan_rst = gpio + 2; - - if (gpio_request_one(wlan_rst, GPIOF_OUT_INIT_HIGH, "WLAN RST") == 0) { - gpio_export(wlan_rst, 0); - udelay(10); - gpio_set_value_cansleep(wlan_rst, 0); - udelay(10); - gpio_set_value_cansleep(wlan_rst, 1); - } else { - pr_err("CM-T35: could not obtain gpio for WiFi reset\n"); - } - - /* gpio + 0 is "mmc0_cd" (input/IRQ) */ - mmc[0].gpio_cd = gpio + 0; - omap_hsmmc_late_init(mmc); - - return 0; -} - -static struct twl4030_gpio_platform_data cm_t35_gpio_data = { - .setup = cm_t35_twl_gpio_setup, -}; - -static struct twl4030_power_data cm_t35_power_data = { - .use_poweroff = true, -}; - -static struct twl4030_platform_data cm_t35_twldata = { - /* platform_data for children goes here */ - .keypad = &cm_t35_kp_data, - .gpio = &cm_t35_gpio_data, - .vmmc1 = &cm_t35_vmmc1, - .vsim = &cm_t35_vsim, - .vio = &cm_t35_vio, - .power = &cm_t35_power_data, -}; - -#if defined(CONFIG_VIDEO_OMAP3) || defined(CONFIG_VIDEO_OMAP3_MODULE) -#include <media/omap3isp.h> -#include "devices.h" - -static struct isp_platform_subdev cm_t35_isp_subdevs[] = { - { - .board_info = &(struct i2c_board_info){ - I2C_BOARD_INFO("mt9t001", 0x5d) - }, - .i2c_adapter_id = 3, - .bus = &(struct isp_bus_cfg){ - .interface = ISP_INTERFACE_PARALLEL, - .bus = { - .parallel = { - .clk_pol = 1, - }, - }, - }, - }, - { - .board_info = &(struct i2c_board_info){ - I2C_BOARD_INFO("tvp5150", 0x5c), - }, - .i2c_adapter_id = 3, - .bus = &(struct isp_bus_cfg){ - .interface = ISP_INTERFACE_PARALLEL, - .bus = { - .parallel = { - .clk_pol = 0, - }, - }, - }, - }, - { 0 }, -}; - -static struct isp_platform_data cm_t35_isp_pdata = { - .subdevs = cm_t35_isp_subdevs, -}; - -static struct regulator_consumer_supply cm_t35_camera_supplies[] = { - REGULATOR_SUPPLY("vaa", "3-005d"), - REGULATOR_SUPPLY("vdd", "3-005d"), -}; - -static void __init cm_t35_init_camera(void) -{ - struct clk *clk; - - clk = clk_register_fixed_rate(NULL, "mt9t001-clkin", NULL, CLK_IS_ROOT, - 48000000); - clk_register_clkdev(clk, NULL, "3-005d"); - - regulator_register_fixed(2, cm_t35_camera_supplies, - ARRAY_SIZE(cm_t35_camera_supplies)); - - if (omap3_init_camera(&cm_t35_isp_pdata) < 0) - pr_warn("CM-T3x: Failed registering camera device!\n"); -} - -#else -static inline void cm_t35_init_camera(void) {} -#endif /* CONFIG_VIDEO_OMAP3 */ - -static void __init cm_t35_init_i2c(void) -{ - omap3_pmic_get_config(&cm_t35_twldata, TWL_COMMON_PDATA_USB, - TWL_COMMON_REGULATOR_VDAC | - TWL_COMMON_PDATA_AUDIO); - - omap3_pmic_init("tps65930", &cm_t35_twldata); - - omap_register_i2c_bus(3, 400, NULL, 0); -} - -#ifdef CONFIG_OMAP_MUX -static struct omap_board_mux board_mux[] __initdata = { - /* nCS and IRQ for CM-T35 ethernet */ - OMAP3_MUX(GPMC_NCS5, OMAP_MUX_MODE0), - OMAP3_MUX(UART3_CTS_RCTX, OMAP_MUX_MODE4 | OMAP_PIN_INPUT_PULLUP), - - /* nCS and IRQ for SB-T35 ethernet */ - OMAP3_MUX(GPMC_NCS4, OMAP_MUX_MODE0), - OMAP3_MUX(GPMC_WAIT3, OMAP_MUX_MODE4 | OMAP_PIN_INPUT_PULLUP), - - /* PENDOWN GPIO */ - OMAP3_MUX(GPMC_NCS6, OMAP_MUX_MODE4 | OMAP_PIN_INPUT), - - /* mUSB */ - OMAP3_MUX(HSUSB0_CLK, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), - OMAP3_MUX(HSUSB0_STP, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), - OMAP3_MUX(HSUSB0_DIR, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), - OMAP3_MUX(HSUSB0_NXT, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), - OMAP3_MUX(HSUSB0_DATA0, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), - OMAP3_MUX(HSUSB0_DATA1, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), - OMAP3_MUX(HSUSB0_DATA2, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), - OMAP3_MUX(HSUSB0_DATA3, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), - OMAP3_MUX(HSUSB0_DATA4, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), - OMAP3_MUX(HSUSB0_DATA5, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), - OMAP3_MUX(HSUSB0_DATA6, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), - OMAP3_MUX(HSUSB0_DATA7, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), - - /* MMC 2 */ - OMAP3_MUX(SDMMC2_DAT4, OMAP_MUX_MODE1 | OMAP_PIN_OUTPUT), - OMAP3_MUX(SDMMC2_DAT5, OMAP_MUX_MODE1 | OMAP_PIN_OUTPUT), - OMAP3_MUX(SDMMC2_DAT6, OMAP_MUX_MODE1 | OMAP_PIN_OUTPUT), - OMAP3_MUX(SDMMC2_DAT7, OMAP_MUX_MODE1 | OMAP_PIN_INPUT), - - /* McSPI 1 */ - OMAP3_MUX(MCSPI1_CLK, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), - OMAP3_MUX(MCSPI1_SIMO, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), - OMAP3_MUX(MCSPI1_SOMI, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), - OMAP3_MUX(MCSPI1_CS0, OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLDOWN), - - /* McSPI 4 */ - OMAP3_MUX(MCBSP1_CLKR, OMAP_MUX_MODE1 | OMAP_PIN_INPUT), - OMAP3_MUX(MCBSP1_DX, OMAP_MUX_MODE1 | OMAP_PIN_INPUT), - OMAP3_MUX(MCBSP1_DR, OMAP_MUX_MODE1 | OMAP_PIN_INPUT), - OMAP3_MUX(MCBSP1_FSX, OMAP_MUX_MODE1 | OMAP_PIN_INPUT_PULLUP), - - /* McBSP 2 */ - OMAP3_MUX(MCBSP2_FSX, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), - OMAP3_MUX(MCBSP2_CLKX, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), - OMAP3_MUX(MCBSP2_DR, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), - OMAP3_MUX(MCBSP2_DX, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), - - /* serial ports */ - OMAP3_MUX(MCBSP3_CLKX, OMAP_MUX_MODE1 | OMAP_PIN_OUTPUT), - OMAP3_MUX(MCBSP3_FSX, OMAP_MUX_MODE1 | OMAP_PIN_INPUT), - OMAP3_MUX(UART1_TX, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), - OMAP3_MUX(UART1_RX, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), - - /* common DSS */ - OMAP3_MUX(DSS_PCLK, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), - OMAP3_MUX(DSS_HSYNC, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), - OMAP3_MUX(DSS_VSYNC, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), - OMAP3_MUX(DSS_ACBIAS, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), - OMAP3_MUX(DSS_DATA6, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), - OMAP3_MUX(DSS_DATA7, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), - OMAP3_MUX(DSS_DATA8, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), - OMAP3_MUX(DSS_DATA9, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), - OMAP3_MUX(DSS_DATA10, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), - OMAP3_MUX(DSS_DATA11, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), - OMAP3_MUX(DSS_DATA12, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), - OMAP3_MUX(DSS_DATA13, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), - OMAP3_MUX(DSS_DATA14, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), - OMAP3_MUX(DSS_DATA15, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), - OMAP3_MUX(DSS_DATA16, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), - OMAP3_MUX(DSS_DATA17, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), - - /* Camera */ - OMAP3_MUX(CAM_HS, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), - OMAP3_MUX(CAM_VS, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), - OMAP3_MUX(CAM_XCLKA, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), - OMAP3_MUX(CAM_PCLK, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), - OMAP3_MUX(CAM_FLD, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), - OMAP3_MUX(CAM_D0, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), - OMAP3_MUX(CAM_D1, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), - OMAP3_MUX(CAM_D2, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), - OMAP3_MUX(CAM_D3, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), - OMAP3_MUX(CAM_D4, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), - OMAP3_MUX(CAM_D5, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), - OMAP3_MUX(CAM_D6, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), - OMAP3_MUX(CAM_D7, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), - OMAP3_MUX(CAM_D8, OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLDOWN), - OMAP3_MUX(CAM_D9, OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLDOWN), - OMAP3_MUX(CAM_STROBE, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), - - OMAP3_MUX(CAM_D10, OMAP_MUX_MODE4 | OMAP_PIN_INPUT_PULLDOWN), - OMAP3_MUX(CAM_D11, OMAP_MUX_MODE4 | OMAP_PIN_INPUT_PULLDOWN), - - /* display controls */ - OMAP3_MUX(MCBSP1_FSR, OMAP_MUX_MODE4 | OMAP_PIN_OUTPUT), - OMAP3_MUX(GPMC_NCS7, OMAP_MUX_MODE4 | OMAP_PIN_OUTPUT), - OMAP3_MUX(GPMC_NCS3, OMAP_MUX_MODE4 | OMAP_PIN_OUTPUT), - - /* TPS IRQ */ - OMAP3_MUX(SYS_NIRQ, OMAP_MUX_MODE0 | OMAP_WAKEUP_EN | \ - OMAP_PIN_INPUT_PULLUP), - - { .reg_offset = OMAP_MUX_TERMINATOR }, -}; - -static void __init cm_t3x_common_dss_mux_init(int mux_mode) -{ - omap_mux_init_signal("dss_data18", mux_mode); - omap_mux_init_signal("dss_data19", mux_mode); - omap_mux_init_signal("dss_data20", mux_mode); - omap_mux_init_signal("dss_data21", mux_mode); - omap_mux_init_signal("dss_data22", mux_mode); - omap_mux_init_signal("dss_data23", mux_mode); -} - -static void __init cm_t35_init_mux(void) -{ - int mux_mode = OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT; - - omap_mux_init_signal("dss_data0.dss_data0", mux_mode); - omap_mux_init_signal("dss_data1.dss_data1", mux_mode); - omap_mux_init_signal("dss_data2.dss_data2", mux_mode); - omap_mux_init_signal("dss_data3.dss_data3", mux_mode); - omap_mux_init_signal("dss_data4.dss_data4", mux_mode); - omap_mux_init_signal("dss_data5.dss_data5", mux_mode); - cm_t3x_common_dss_mux_init(mux_mode); -} - -static void __init cm_t3730_init_mux(void) -{ - int mux_mode = OMAP_MUX_MODE3 | OMAP_PIN_OUTPUT; - - omap_mux_init_signal("sys_boot0", mux_mode); - omap_mux_init_signal("sys_boot1", mux_mode); - omap_mux_init_signal("sys_boot3", mux_mode); - omap_mux_init_signal("sys_boot4", mux_mode); - omap_mux_init_signal("sys_boot5", mux_mode); - omap_mux_init_signal("sys_boot6", mux_mode); - cm_t3x_common_dss_mux_init(mux_mode); -} -#else -static inline void cm_t35_init_mux(void) {} -static inline void cm_t3730_init_mux(void) {} -#endif - -static void __init cm_t3x_common_init(void) -{ - omap3_mux_init(board_mux, OMAP_PACKAGE_CUS); - omap_serial_init(); - omap_sdrc_init(mt46h32m32lf6_sdrc_params, - mt46h32m32lf6_sdrc_params); - omap_hsmmc_init(mmc); - cm_t35_init_i2c(); - omap_ads7846_init(1, CM_T35_GPIO_PENDOWN, 0, NULL); - cm_t35_init_ethernet(); - cm_t35_init_led(); - cm_t35_init_display(); - omap_twl4030_audio_init("cm-t3x", NULL); - - usb_bind_phy("musb-hdrc.0.auto", 0, "twl4030_usb"); - usb_musb_init(NULL); - cm_t35_init_usbh(); - cm_t35_init_camera(); -} - -static void __init cm_t35_init(void) -{ - cm_t3x_common_init(); - cm_t35_init_mux(); - cm_t35_init_nand(); -} - -static void __init cm_t3730_init(void) -{ - cm_t3x_common_init(); - cm_t3730_init_mux(); -} - -MACHINE_START(CM_T35, "Compulab CM-T35") - .atag_offset = 0x100, - .reserve = omap_reserve, - .map_io = omap3_map_io, - .init_early = omap35xx_init_early, - .init_irq = omap3_init_irq, - .init_machine = cm_t35_init, - .init_late = omap35xx_init_late, - .init_time = omap3_sync32k_timer_init, - .restart = omap3xxx_restart, -MACHINE_END - -MACHINE_START(CM_T3730, "Compulab CM-T3730") - .atag_offset = 0x100, - .reserve = omap_reserve, - .map_io = omap3_map_io, - .init_early = omap3630_init_early, - .init_irq = omap3_init_irq, - .init_machine = cm_t3730_init, - .init_late = omap3630_init_late, - .init_time = omap3_sync32k_timer_init, - .restart = omap3xxx_restart, -MACHINE_END diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-omap2/board-omap3beagle.c deleted file mode 100644 index 81de1c68b..000000000 --- a/arch/arm/mach-omap2/board-omap3beagle.c +++ /dev/null @@ -1,595 +0,0 @@ -/* - * linux/arch/arm/mach-omap2/board-omap3beagle.c - * - * Copyright (C) 2008 Texas Instruments - * - * Modified from mach-omap2/board-3430sdp.c - * - * Initial code: Syed Mohammed Khasim - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/platform_device.h> -#include <linux/delay.h> -#include <linux/err.h> -#include <linux/clk.h> -#include <linux/io.h> -#include <linux/leds.h> -#include <linux/pwm.h> -#include <linux/leds_pwm.h> -#include <linux/gpio.h> -#include <linux/input.h> -#include <linux/gpio_keys.h> -#include <linux/pm_opp.h> -#include <linux/cpu.h> - -#include <linux/mtd/mtd.h> -#include <linux/mtd/partitions.h> -#include <linux/mtd/nand.h> -#include <linux/mmc/host.h> -#include <linux/usb/phy.h> - -#include <linux/regulator/machine.h> -#include <linux/i2c/twl.h> - -#include <asm/mach-types.h> -#include <asm/mach/arch.h> -#include <asm/mach/map.h> -#include <asm/mach/flash.h> - -#include <video/omapdss.h> -#include <video/omap-panel-data.h> -#include <linux/platform_data/mtd-nand-omap2.h> - -#include "common.h" -#include "omap_device.h" -#include "gpmc.h" -#include "soc.h" -#include "mux.h" -#include "hsmmc.h" -#include "pm.h" -#include "board-flash.h" -#include "common-board-devices.h" - -#define NAND_CS 0 - -static struct pwm_lookup pwm_lookup[] = { - /* LEDB -> PMU_STAT */ - PWM_LOOKUP("twl-pwmled", 1, "leds_pwm", "beagleboard::pmu_stat", - 7812500, PWM_POLARITY_NORMAL), -}; - -static struct led_pwm pwm_leds[] = { - { - .name = "beagleboard::pmu_stat", - .max_brightness = 127, - .pwm_period_ns = 7812500, - }, -}; - -static struct led_pwm_platform_data pwm_data = { - .num_leds = ARRAY_SIZE(pwm_leds), - .leds = pwm_leds, -}; - -static struct platform_device leds_pwm = { - .name = "leds_pwm", - .id = -1, - .dev = { - .platform_data = &pwm_data, - }, -}; - -/* - * OMAP3 Beagle revision - * Run time detection of Beagle revision is done by reading GPIO. - * GPIO ID - - * AXBX = GPIO173, GPIO172, GPIO171: 1 1 1 - * C1_3 = GPIO173, GPIO172, GPIO171: 1 1 0 - * C4 = GPIO173, GPIO172, GPIO171: 1 0 1 - * XMA/XMB = GPIO173, GPIO172, GPIO171: 0 0 0 - * XMC = GPIO173, GPIO172, GPIO171: 0 1 0 - */ -enum { - OMAP3BEAGLE_BOARD_UNKN = 0, - OMAP3BEAGLE_BOARD_AXBX, - OMAP3BEAGLE_BOARD_C1_3, - OMAP3BEAGLE_BOARD_C4, - OMAP3BEAGLE_BOARD_XM, - OMAP3BEAGLE_BOARD_XMC, -}; - -static u8 omap3_beagle_version; - -/* - * Board-specific configuration - * Defaults to BeagleBoard-xMC - */ -static struct { - int mmc1_gpio_wp; - bool usb_pwr_level; /* 0 - Active Low, 1 - Active High */ - int dvi_pd_gpio; - int usr_button_gpio; - int mmc_caps; -} beagle_config = { - .mmc1_gpio_wp = -EINVAL, - .usb_pwr_level = 0, - .dvi_pd_gpio = -EINVAL, - .usr_button_gpio = 4, - .mmc_caps = MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA, -}; - -static struct gpio omap3_beagle_rev_gpios[] __initdata = { - { 171, GPIOF_IN, "rev_id_0" }, - { 172, GPIOF_IN, "rev_id_1" }, - { 173, GPIOF_IN, "rev_id_2" }, -}; - -static void __init omap3_beagle_init_rev(void) -{ - int ret; - u16 beagle_rev = 0; - - omap_mux_init_gpio(171, OMAP_PIN_INPUT_PULLUP); - omap_mux_init_gpio(172, OMAP_PIN_INPUT_PULLUP); - omap_mux_init_gpio(173, OMAP_PIN_INPUT_PULLUP); - - ret = gpio_request_array(omap3_beagle_rev_gpios, - ARRAY_SIZE(omap3_beagle_rev_gpios)); - if (ret < 0) { - printk(KERN_ERR "Unable to get revision detection GPIO pins\n"); - omap3_beagle_version = OMAP3BEAGLE_BOARD_UNKN; - return; - } - - beagle_rev = gpio_get_value(171) | (gpio_get_value(172) << 1) - | (gpio_get_value(173) << 2); - - gpio_free_array(omap3_beagle_rev_gpios, - ARRAY_SIZE(omap3_beagle_rev_gpios)); - - switch (beagle_rev) { - case 7: - printk(KERN_INFO "OMAP3 Beagle Rev: Ax/Bx\n"); - omap3_beagle_version = OMAP3BEAGLE_BOARD_AXBX; - beagle_config.mmc1_gpio_wp = 29; - beagle_config.dvi_pd_gpio = 170; - beagle_config.usr_button_gpio = 7; - break; - case 6: - printk(KERN_INFO "OMAP3 Beagle Rev: C1/C2/C3\n"); - omap3_beagle_version = OMAP3BEAGLE_BOARD_C1_3; - beagle_config.mmc1_gpio_wp = 23; - beagle_config.dvi_pd_gpio = 170; - beagle_config.usr_button_gpio = 7; - break; - case 5: - printk(KERN_INFO "OMAP3 Beagle Rev: C4\n"); - omap3_beagle_version = OMAP3BEAGLE_BOARD_C4; - beagle_config.mmc1_gpio_wp = 23; - beagle_config.dvi_pd_gpio = 170; - beagle_config.usr_button_gpio = 7; - break; - case 0: - printk(KERN_INFO "OMAP3 Beagle Rev: xM Ax/Bx\n"); - omap3_beagle_version = OMAP3BEAGLE_BOARD_XM; - beagle_config.usb_pwr_level = 1; - beagle_config.mmc_caps &= ~MMC_CAP_8_BIT_DATA; - break; - case 2: - printk(KERN_INFO "OMAP3 Beagle Rev: xM C\n"); - omap3_beagle_version = OMAP3BEAGLE_BOARD_XMC; - beagle_config.mmc_caps &= ~MMC_CAP_8_BIT_DATA; - break; - default: - printk(KERN_INFO "OMAP3 Beagle Rev: unknown %hd\n", beagle_rev); - omap3_beagle_version = OMAP3BEAGLE_BOARD_UNKN; - } -} - -static struct mtd_partition omap3beagle_nand_partitions[] = { - /* All the partition sizes are listed in terms of NAND block size */ - { - .name = "X-Loader", - .offset = 0, - .size = 4 * NAND_BLOCK_SIZE, - .mask_flags = MTD_WRITEABLE, /* force read-only */ - }, - { - .name = "U-Boot", - .offset = MTDPART_OFS_APPEND, /* Offset = 0x80000 */ - .size = 15 * NAND_BLOCK_SIZE, - .mask_flags = MTD_WRITEABLE, /* force read-only */ - }, - { - .name = "U-Boot Env", - .offset = MTDPART_OFS_APPEND, /* Offset = 0x260000 */ - .size = 1 * NAND_BLOCK_SIZE, - }, - { - .name = "Kernel", - .offset = MTDPART_OFS_APPEND, /* Offset = 0x280000 */ - .size = 32 * NAND_BLOCK_SIZE, - }, - { - .name = "File System", - .offset = MTDPART_OFS_APPEND, /* Offset = 0x680000 */ - .size = MTDPART_SIZ_FULL, - }, -}; - -/* DSS */ - -static struct connector_dvi_platform_data beagle_dvi_connector_pdata = { - .name = "dvi", - .source = "tfp410.0", - .i2c_bus_num = 3, -}; - -static struct platform_device beagle_dvi_connector_device = { - .name = "connector-dvi", - .id = 0, - .dev.platform_data = &beagle_dvi_connector_pdata, -}; - -static struct encoder_tfp410_platform_data beagle_tfp410_pdata = { - .name = "tfp410.0", - .source = "dpi.0", - .data_lines = 24, - .power_down_gpio = -1, -}; - -static struct platform_device beagle_tfp410_device = { - .name = "tfp410", - .id = 0, - .dev.platform_data = &beagle_tfp410_pdata, -}; - -static struct connector_atv_platform_data beagle_tv_pdata = { - .name = "tv", - .source = "venc.0", - .connector_type = OMAP_DSS_VENC_TYPE_SVIDEO, - .invert_polarity = false, -}; - -static struct platform_device beagle_tv_connector_device = { - .name = "connector-analog-tv", - .id = 0, - .dev.platform_data = &beagle_tv_pdata, -}; - -static struct omap_dss_board_info beagle_dss_data = { - .default_display_name = "dvi", -}; - -#include "sdram-micron-mt46h32m32lf-6.h" - -static struct omap2_hsmmc_info mmc[] = { - { - .mmc = 1, - .caps = MMC_CAP_4_BIT_DATA, - .gpio_wp = -EINVAL, - .deferred = true, - }, - {} /* Terminator */ -}; - -static struct regulator_consumer_supply beagle_vmmc1_supply[] = { - REGULATOR_SUPPLY("vmmc", "omap_hsmmc.0"), -}; - -static struct regulator_consumer_supply beagle_vsim_supply[] = { - REGULATOR_SUPPLY("vmmc_aux", "omap_hsmmc.0"), -}; - -static struct gpio_led gpio_leds[]; - -static struct usbhs_phy_data phy_data[] = { - { - .port = 2, - .reset_gpio = 147, - .vcc_gpio = -1, /* updated in beagle_twl_gpio_setup */ - .vcc_polarity = 1, /* updated in beagle_twl_gpio_setup */ - }, -}; - -static int beagle_twl_gpio_setup(struct device *dev, - unsigned gpio, unsigned ngpio) -{ - int r; - - mmc[0].gpio_wp = beagle_config.mmc1_gpio_wp; - /* gpio + 0 is "mmc0_cd" (input/IRQ) */ - mmc[0].gpio_cd = gpio + 0; - omap_hsmmc_late_init(mmc); - - /* - * TWL4030_GPIO_MAX + 0 == ledA, EHCI nEN_USB_PWR (out, XM active - * high / others active low) - * DVI reset GPIO is different between beagle revisions - */ - /* Valid for all -xM revisions */ - if (cpu_is_omap3630()) { - /* - * gpio + 1 on Xm controls the TFP410's enable line (active low) - * gpio + 2 control varies depending on the board rev as below: - * P7/P8 revisions(prototype): Camera EN - * A2+ revisions (production): LDO (DVI, serial, led blocks) - */ - r = gpio_request_one(gpio + 1, GPIOF_OUT_INIT_LOW, - "nDVI_PWR_EN"); - if (r) - pr_err("%s: unable to configure nDVI_PWR_EN\n", - __func__); - - beagle_config.dvi_pd_gpio = gpio + 2; - - } else { - /* - * REVISIT: need ehci-omap hooks for external VBUS - * power switch and overcurrent detect - */ - if (gpio_request_one(gpio + 1, GPIOF_IN, "EHCI_nOC")) - pr_err("%s: unable to configure EHCI_nOC\n", __func__); - } - beagle_tfp410_pdata.power_down_gpio = beagle_config.dvi_pd_gpio; - - platform_device_register(&beagle_tfp410_device); - platform_device_register(&beagle_dvi_connector_device); - platform_device_register(&beagle_tv_connector_device); - - /* TWL4030_GPIO_MAX i.e. LED_GPO controls HS USB Port 2 power */ - phy_data[0].vcc_gpio = gpio + TWL4030_GPIO_MAX; - phy_data[0].vcc_polarity = beagle_config.usb_pwr_level; - - usbhs_init_phys(phy_data, ARRAY_SIZE(phy_data)); - return 0; -} - -static struct twl4030_gpio_platform_data beagle_gpio_data = { - .use_leds = true, - .pullups = BIT(1), - .pulldowns = BIT(2) | BIT(6) | BIT(7) | BIT(8) | BIT(13) - | BIT(15) | BIT(16) | BIT(17), - .setup = beagle_twl_gpio_setup, -}; - -/* VMMC1 for MMC1 pins CMD, CLK, DAT0..DAT3 (20 mA, plus card == max 220 mA) */ -static struct regulator_init_data beagle_vmmc1 = { - .constraints = { - .min_uV = 1850000, - .max_uV = 3150000, - .valid_modes_mask = REGULATOR_MODE_NORMAL - | REGULATOR_MODE_STANDBY, - .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE - | REGULATOR_CHANGE_MODE - | REGULATOR_CHANGE_STATUS, - }, - .num_consumer_supplies = ARRAY_SIZE(beagle_vmmc1_supply), - .consumer_supplies = beagle_vmmc1_supply, -}; - -/* VSIM for MMC1 pins DAT4..DAT7 (2 mA, plus card == max 50 mA) */ -static struct regulator_init_data beagle_vsim = { - .constraints = { - .min_uV = 1800000, - .max_uV = 3000000, - .valid_modes_mask = REGULATOR_MODE_NORMAL - | REGULATOR_MODE_STANDBY, - .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE - | REGULATOR_CHANGE_MODE - | REGULATOR_CHANGE_STATUS, - }, - .num_consumer_supplies = ARRAY_SIZE(beagle_vsim_supply), - .consumer_supplies = beagle_vsim_supply, -}; - -static struct twl4030_platform_data beagle_twldata = { - /* platform_data for children goes here */ - .gpio = &beagle_gpio_data, - .vmmc1 = &beagle_vmmc1, - .vsim = &beagle_vsim, -}; - -static struct i2c_board_info __initdata beagle_i2c_eeprom[] = { - { - I2C_BOARD_INFO("eeprom", 0x50), - }, -}; - -static int __init omap3_beagle_i2c_init(void) -{ - omap3_pmic_get_config(&beagle_twldata, - TWL_COMMON_PDATA_USB | TWL_COMMON_PDATA_MADC | - TWL_COMMON_PDATA_AUDIO, - TWL_COMMON_REGULATOR_VDAC | TWL_COMMON_REGULATOR_VPLL2); - - beagle_twldata.vpll2->constraints.name = "VDVI"; - - omap3_pmic_init("twl4030", &beagle_twldata); - /* Bus 3 is attached to the DVI port where devices like the pico DLP - * projector don't work reliably with 400kHz */ - omap_register_i2c_bus(3, 100, beagle_i2c_eeprom, ARRAY_SIZE(beagle_i2c_eeprom)); - return 0; -} - -static struct gpio_led gpio_leds[] = { - { - .name = "beagleboard::usr0", - .default_trigger = "heartbeat", - .gpio = 150, - }, - { - .name = "beagleboard::usr1", - .default_trigger = "mmc0", - .gpio = 149, - }, -}; - -static struct gpio_led_platform_data gpio_led_info = { - .leds = gpio_leds, - .num_leds = ARRAY_SIZE(gpio_leds), -}; - -static struct platform_device leds_gpio = { - .name = "leds-gpio", - .id = -1, - .dev = { - .platform_data = &gpio_led_info, - }, -}; - -static struct gpio_keys_button gpio_buttons[] = { - { - .code = BTN_EXTRA, - /* Dynamically assigned depending on board */ - .gpio = -EINVAL, - .desc = "user", - .wakeup = 1, - }, -}; - -static struct gpio_keys_platform_data gpio_key_info = { - .buttons = gpio_buttons, - .nbuttons = ARRAY_SIZE(gpio_buttons), -}; - -static struct platform_device keys_gpio = { - .name = "gpio-keys", - .id = -1, - .dev = { - .platform_data = &gpio_key_info, - }, -}; - -static struct platform_device madc_hwmon = { - .name = "twl4030_madc_hwmon", - .id = -1, -}; - -static struct platform_device *omap3_beagle_devices[] __initdata = { - &leds_gpio, - &keys_gpio, - &madc_hwmon, - &leds_pwm, -}; - -static struct usbhs_omap_platform_data usbhs_bdata __initdata = { - .port_mode[1] = OMAP_EHCI_PORT_MODE_PHY, -}; - -#ifdef CONFIG_OMAP_MUX -static struct omap_board_mux board_mux[] __initdata = { - { .reg_offset = OMAP_MUX_TERMINATOR }, -}; -#endif - -static int __init beagle_opp_init(void) -{ - int r = 0; - - if (!machine_is_omap3_beagle()) - return 0; - - /* Initialize the omap3 opp table if not already created. */ - r = omap3_opp_init(); - if (r < 0 && (r != -EEXIST)) { - pr_err("%s: opp default init failed\n", __func__); - return r; - } - - /* Custom OPP enabled for all xM versions */ - if (cpu_is_omap3630()) { - struct device *mpu_dev, *iva_dev; - - mpu_dev = get_cpu_device(0); - iva_dev = omap_device_get_by_hwmod_name("iva"); - - if (!mpu_dev || IS_ERR(iva_dev)) { - pr_err("%s: Aiee.. no mpu/dsp devices? %p %p\n", - __func__, mpu_dev, iva_dev); - return -ENODEV; - } - /* Enable MPU 1GHz and lower opps */ - r = dev_pm_opp_enable(mpu_dev, 800000000); - /* TODO: MPU 1GHz needs SR and ABB */ - - /* Enable IVA 800MHz and lower opps */ - r |= dev_pm_opp_enable(iva_dev, 660000000); - /* TODO: DSP 800MHz needs SR and ABB */ - if (r) { - pr_err("%s: failed to enable higher opp %d\n", - __func__, r); - /* - * Cleanup - disable the higher freqs - we dont care - * about the results - */ - dev_pm_opp_disable(mpu_dev, 800000000); - dev_pm_opp_disable(iva_dev, 660000000); - } - } - return 0; -} -omap_device_initcall(beagle_opp_init); - -static void __init omap3_beagle_init(void) -{ - omap3_mux_init(board_mux, OMAP_PACKAGE_CBB); - omap3_beagle_init_rev(); - - if (gpio_is_valid(beagle_config.mmc1_gpio_wp)) - omap_mux_init_gpio(beagle_config.mmc1_gpio_wp, OMAP_PIN_INPUT); - mmc[0].caps = beagle_config.mmc_caps; - omap_hsmmc_init(mmc); - - omap3_beagle_i2c_init(); - - gpio_buttons[0].gpio = beagle_config.usr_button_gpio; - - platform_add_devices(omap3_beagle_devices, - ARRAY_SIZE(omap3_beagle_devices)); - if (gpio_is_valid(beagle_config.dvi_pd_gpio)) - omap_mux_init_gpio(beagle_config.dvi_pd_gpio, OMAP_PIN_OUTPUT); - omap_display_init(&beagle_dss_data); - - omap_serial_init(); - omap_sdrc_init(mt46h32m32lf6_sdrc_params, - mt46h32m32lf6_sdrc_params); - - usb_bind_phy("musb-hdrc.0.auto", 0, "twl4030_usb"); - usb_musb_init(NULL); - - usbhs_init(&usbhs_bdata); - - board_nand_init(omap3beagle_nand_partitions, - ARRAY_SIZE(omap3beagle_nand_partitions), NAND_CS, - NAND_BUSWIDTH_16, NULL); - omap_twl4030_audio_init("omap3beagle", NULL); - - /* Ensure msecure is mux'd to be able to set the RTC. */ - omap_mux_init_signal("sys_drm_msecure", OMAP_PIN_OFF_OUTPUT_HIGH); - - /* Ensure SDRC pins are mux'd for self-refresh */ - omap_mux_init_signal("sdrc_cke0", OMAP_PIN_OUTPUT); - omap_mux_init_signal("sdrc_cke1", OMAP_PIN_OUTPUT); - - pwm_add_table(pwm_lookup, ARRAY_SIZE(pwm_lookup)); -} - -MACHINE_START(OMAP3_BEAGLE, "OMAP3 Beagle Board") - /* Maintainer: Syed Mohammed Khasim - http://beagleboard.org */ - .atag_offset = 0x100, - .reserve = omap_reserve, - .map_io = omap3_map_io, - .init_early = omap3_init_early, - .init_irq = omap3_init_irq, - .init_machine = omap3_beagle_init, - .init_late = omap3_init_late, - .init_time = omap3_secure_sync32k_timer_init, - .restart = omap3xxx_restart, -MACHINE_END diff --git a/arch/arm/mach-omap2/board-overo.c b/arch/arm/mach-omap2/board-overo.c deleted file mode 100644 index 2dae6ccd3..000000000 --- a/arch/arm/mach-omap2/board-overo.c +++ /dev/null @@ -1,571 +0,0 @@ -/* - * board-overo.c (Gumstix Overo) - * - * Initial code: Steve Sakoman <steve@sakoman.com> - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * version 2 as published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA - * 02110-1301 USA - * - */ - -#include <linux/clk.h> -#include <linux/delay.h> -#include <linux/err.h> -#include <linux/init.h> -#include <linux/io.h> -#include <linux/gpio.h> -#include <linux/kernel.h> -#include <linux/platform_device.h> -#include <linux/i2c/twl.h> -#include <linux/regulator/machine.h> -#include <linux/regulator/fixed.h> -#include <linux/spi/spi.h> - -#include <linux/mtd/mtd.h> -#include <linux/mtd/nand.h> -#include <linux/mtd/partitions.h> -#include <linux/mmc/host.h> -#include <linux/usb/phy.h> - -#include <linux/platform_data/mtd-nand-omap2.h> -#include <linux/platform_data/spi-omap2-mcspi.h> - -#include <asm/mach-types.h> -#include <asm/mach/arch.h> -#include <asm/mach/flash.h> -#include <asm/mach/map.h> - -#include <video/omapdss.h> -#include <video/omap-panel-data.h> - -#include "common.h" -#include "mux.h" -#include "sdram-micron-mt46h32m32lf-6.h" -#include "gpmc.h" -#include "hsmmc.h" -#include "board-flash.h" -#include "common-board-devices.h" - -#define NAND_CS 0 - -#define OVERO_GPIO_BT_XGATE 15 -#define OVERO_GPIO_W2W_NRESET 16 -#define OVERO_GPIO_PENDOWN 114 -#define OVERO_GPIO_BT_NRESET 164 -#define OVERO_GPIO_USBH_CPEN 168 -#define OVERO_GPIO_USBH_NRESET 183 - -#define OVERO_SMSC911X_CS 5 -#define OVERO_SMSC911X_GPIO 176 -#define OVERO_SMSC911X_NRESET 64 -#define OVERO_SMSC911X2_CS 4 -#define OVERO_SMSC911X2_GPIO 65 - -/* whether to register LCD35 instead of LCD43 */ -static bool overo_use_lcd35; - -#if defined(CONFIG_TOUCHSCREEN_ADS7846) || \ - defined(CONFIG_TOUCHSCREEN_ADS7846_MODULE) - -/* fixed regulator for ads7846 */ -static struct regulator_consumer_supply ads7846_supply[] = { - REGULATOR_SUPPLY("vcc", "spi1.0"), -}; - -static struct regulator_init_data vads7846_regulator = { - .constraints = { - .valid_ops_mask = REGULATOR_CHANGE_STATUS, - }, - .num_consumer_supplies = ARRAY_SIZE(ads7846_supply), - .consumer_supplies = ads7846_supply, -}; - -static struct fixed_voltage_config vads7846 = { - .supply_name = "vads7846", - .microvolts = 3300000, /* 3.3V */ - .gpio = -EINVAL, - .startup_delay = 0, - .init_data = &vads7846_regulator, -}; - -static struct platform_device vads7846_device = { - .name = "reg-fixed-voltage", - .id = 1, - .dev = { - .platform_data = &vads7846, - }, -}; - -static void __init overo_ads7846_init(void) -{ - omap_ads7846_init(1, OVERO_GPIO_PENDOWN, 0, NULL); - platform_device_register(&vads7846_device); -} - -#else -static inline void __init overo_ads7846_init(void) { return; } -#endif - -#if defined(CONFIG_SMSC911X) || defined(CONFIG_SMSC911X_MODULE) - -#include <linux/smsc911x.h> -#include "gpmc-smsc911x.h" - -static struct omap_smsc911x_platform_data smsc911x_cfg = { - .id = 0, - .cs = OVERO_SMSC911X_CS, - .gpio_irq = OVERO_SMSC911X_GPIO, - .gpio_reset = OVERO_SMSC911X_NRESET, - .flags = SMSC911X_USE_32BIT, -}; - -static struct omap_smsc911x_platform_data smsc911x2_cfg = { - .id = 1, - .cs = OVERO_SMSC911X2_CS, - .gpio_irq = OVERO_SMSC911X2_GPIO, - .gpio_reset = -EINVAL, - .flags = SMSC911X_USE_32BIT, -}; - -static void __init overo_init_smsc911x(void) -{ - gpmc_smsc911x_init(&smsc911x_cfg); - gpmc_smsc911x_init(&smsc911x2_cfg); -} - -#else -static inline void __init overo_init_smsc911x(void) { return; } -#endif - -/* DSS */ -#define OVERO_GPIO_LCD_EN 144 -#define OVERO_GPIO_LCD_BL 145 - -static struct connector_atv_platform_data overo_tv_pdata = { - .name = "tv", - .source = "venc.0", - .connector_type = OMAP_DSS_VENC_TYPE_SVIDEO, - .invert_polarity = false, -}; - -static struct platform_device overo_tv_connector_device = { - .name = "connector-analog-tv", - .id = 0, - .dev.platform_data = &overo_tv_pdata, -}; - -static const struct display_timing overo_lcd43_videomode = { - .pixelclock = { 0, 9200000, 0 }, - - .hactive = { 0, 480, 0 }, - .hfront_porch = { 0, 8, 0 }, - .hback_porch = { 0, 4, 0 }, - .hsync_len = { 0, 41, 0 }, - - .vactive = { 0, 272, 0 }, - .vfront_porch = { 0, 4, 0 }, - .vback_porch = { 0, 2, 0 }, - .vsync_len = { 0, 10, 0 }, - - .flags = DISPLAY_FLAGS_HSYNC_LOW | DISPLAY_FLAGS_VSYNC_LOW | - DISPLAY_FLAGS_DE_HIGH | DISPLAY_FLAGS_PIXDATA_POSEDGE, -}; - -static struct panel_dpi_platform_data overo_lcd43_pdata = { - .name = "lcd43", - .source = "dpi.0", - - .data_lines = 24, - - .display_timing = &overo_lcd43_videomode, - - .enable_gpio = OVERO_GPIO_LCD_EN, - .backlight_gpio = OVERO_GPIO_LCD_BL, -}; - -static struct platform_device overo_lcd43_device = { - .name = "panel-dpi", - .id = 0, - .dev.platform_data = &overo_lcd43_pdata, -}; - -static struct connector_dvi_platform_data overo_dvi_connector_pdata = { - .name = "dvi", - .source = "tfp410.0", - .i2c_bus_num = 3, -}; - -static struct platform_device overo_dvi_connector_device = { - .name = "connector-dvi", - .id = 0, - .dev.platform_data = &overo_dvi_connector_pdata, -}; - -static struct encoder_tfp410_platform_data overo_tfp410_pdata = { - .name = "tfp410.0", - .source = "dpi.0", - .data_lines = 24, - .power_down_gpio = -1, -}; - -static struct platform_device overo_tfp410_device = { - .name = "tfp410", - .id = 0, - .dev.platform_data = &overo_tfp410_pdata, -}; - -static struct omap_dss_board_info overo_dss_data = { - .default_display_name = "lcd43", -}; - -static void __init overo_display_init(void) -{ - omap_display_init(&overo_dss_data); - - if (!overo_use_lcd35) - platform_device_register(&overo_lcd43_device); - platform_device_register(&overo_tfp410_device); - platform_device_register(&overo_dvi_connector_device); - platform_device_register(&overo_tv_connector_device); -} - -static struct mtd_partition overo_nand_partitions[] = { - { - .name = "xloader", - .offset = 0, /* Offset = 0x00000 */ - .size = 4 * NAND_BLOCK_SIZE, - .mask_flags = MTD_WRITEABLE - }, - { - .name = "uboot", - .offset = MTDPART_OFS_APPEND, /* Offset = 0x80000 */ - .size = 14 * NAND_BLOCK_SIZE, - }, - { - .name = "uboot environment", - .offset = MTDPART_OFS_APPEND, /* Offset = 0x240000 */ - .size = 2 * NAND_BLOCK_SIZE, - }, - { - .name = "linux", - .offset = MTDPART_OFS_APPEND, /* Offset = 0x280000 */ - .size = 32 * NAND_BLOCK_SIZE, - }, - { - .name = "rootfs", - .offset = MTDPART_OFS_APPEND, /* Offset = 0x680000 */ - .size = MTDPART_SIZ_FULL, - }, -}; - -static struct omap2_hsmmc_info mmc[] = { - { - .mmc = 1, - .caps = MMC_CAP_4_BIT_DATA, - .gpio_cd = -EINVAL, - .gpio_wp = -EINVAL, - }, - { - .mmc = 2, - .caps = MMC_CAP_4_BIT_DATA, - .gpio_cd = -EINVAL, - .gpio_wp = -EINVAL, - .transceiver = true, - .ocr_mask = 0x00100000, /* 3.3V */ - }, - {} /* Terminator */ -}; - -static struct regulator_consumer_supply overo_vmmc1_supply[] = { - REGULATOR_SUPPLY("vmmc", "omap_hsmmc.0"), -}; - -#if defined(CONFIG_LEDS_GPIO) || defined(CONFIG_LEDS_GPIO_MODULE) -#include <linux/leds.h> - -static struct gpio_led gpio_leds[] = { - { - .name = "overo:red:gpio21", - .default_trigger = "heartbeat", - .gpio = 21, - .active_low = true, - }, - { - .name = "overo:blue:gpio22", - .default_trigger = "none", - .gpio = 22, - .active_low = true, - }, - { - .name = "overo:blue:COM", - .default_trigger = "mmc0", - .gpio = -EINVAL, /* gets replaced */ - .active_low = true, - }, -}; - -static struct gpio_led_platform_data gpio_leds_pdata = { - .leds = gpio_leds, - .num_leds = ARRAY_SIZE(gpio_leds), -}; - -static struct platform_device gpio_leds_device = { - .name = "leds-gpio", - .id = -1, - .dev = { - .platform_data = &gpio_leds_pdata, - }, -}; - -static void __init overo_init_led(void) -{ - platform_device_register(&gpio_leds_device); -} - -#else -static inline void __init overo_init_led(void) { return; } -#endif - -#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE) -#include <linux/input.h> -#include <linux/gpio_keys.h> - -static struct gpio_keys_button gpio_buttons[] = { - { - .code = BTN_0, - .gpio = 23, - .desc = "button0", - .wakeup = 1, - }, - { - .code = BTN_1, - .gpio = 14, - .desc = "button1", - .wakeup = 1, - }, -}; - -static struct gpio_keys_platform_data gpio_keys_pdata = { - .buttons = gpio_buttons, - .nbuttons = ARRAY_SIZE(gpio_buttons), -}; - -static struct platform_device gpio_keys_device = { - .name = "gpio-keys", - .id = -1, - .dev = { - .platform_data = &gpio_keys_pdata, - }, -}; - -static void __init overo_init_keys(void) -{ - platform_device_register(&gpio_keys_device); -} - -#else -static inline void __init overo_init_keys(void) { return; } -#endif - -static int overo_twl_gpio_setup(struct device *dev, - unsigned gpio, unsigned ngpio) -{ -#if defined(CONFIG_LEDS_GPIO) || defined(CONFIG_LEDS_GPIO_MODULE) - /* TWL4030_GPIO_MAX + 1 == ledB, PMU_STAT (out, active low LED) */ - gpio_leds[2].gpio = gpio + TWL4030_GPIO_MAX + 1; -#endif - - return 0; -} - -static struct twl4030_gpio_platform_data overo_gpio_data = { - .use_leds = true, - .setup = overo_twl_gpio_setup, -}; - -static struct regulator_init_data overo_vmmc1 = { - .constraints = { - .min_uV = 1850000, - .max_uV = 3150000, - .valid_modes_mask = REGULATOR_MODE_NORMAL - | REGULATOR_MODE_STANDBY, - .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE - | REGULATOR_CHANGE_MODE - | REGULATOR_CHANGE_STATUS, - }, - .num_consumer_supplies = ARRAY_SIZE(overo_vmmc1_supply), - .consumer_supplies = overo_vmmc1_supply, -}; - -static struct twl4030_platform_data overo_twldata = { - .gpio = &overo_gpio_data, - .vmmc1 = &overo_vmmc1, -}; - -static int __init overo_i2c_init(void) -{ - omap3_pmic_get_config(&overo_twldata, - TWL_COMMON_PDATA_USB | TWL_COMMON_PDATA_AUDIO, - TWL_COMMON_REGULATOR_VDAC | TWL_COMMON_REGULATOR_VPLL2); - - overo_twldata.vpll2->constraints.name = "VDVI"; - - omap3_pmic_init("tps65950", &overo_twldata); - /* i2c2 pins are used for gpio */ - omap_register_i2c_bus(3, 400, NULL, 0); - return 0; -} - -static struct panel_lb035q02_platform_data overo_lcd35_pdata = { - .name = "lcd35", - .source = "dpi.0", - - .data_lines = 24, - - .enable_gpio = OVERO_GPIO_LCD_EN, - .backlight_gpio = OVERO_GPIO_LCD_BL, -}; - -/* - * NOTE: We need to add either the lgphilips panel, or the lcd43 panel. The - * selection is done based on the overo_use_lcd35 field. If new SPI - * devices are added here, extra work is needed to make only the lgphilips panel - * affected by the overo_use_lcd35 field. - */ -static struct spi_board_info overo_spi_board_info[] __initdata = { - { - .modalias = "panel_lgphilips_lb035q02", - .bus_num = 1, - .chip_select = 1, - .max_speed_hz = 500000, - .mode = SPI_MODE_3, - .platform_data = &overo_lcd35_pdata, - }, -}; - -static int __init overo_spi_init(void) -{ - overo_ads7846_init(); - - if (overo_use_lcd35) { - spi_register_board_info(overo_spi_board_info, - ARRAY_SIZE(overo_spi_board_info)); - } - return 0; -} - -static struct usbhs_phy_data phy_data[] __initdata = { - { - .port = 2, - .reset_gpio = OVERO_GPIO_USBH_NRESET, - .vcc_gpio = -EINVAL, - }, -}; - -static struct usbhs_omap_platform_data usbhs_bdata __initdata = { - .port_mode[1] = OMAP_EHCI_PORT_MODE_PHY, -}; - -#ifdef CONFIG_OMAP_MUX -static struct omap_board_mux board_mux[] __initdata = { - { .reg_offset = OMAP_MUX_TERMINATOR }, -}; -#endif - -static struct gpio overo_bt_gpios[] __initdata = { - { OVERO_GPIO_BT_XGATE, GPIOF_OUT_INIT_LOW, "lcd enable" }, - { OVERO_GPIO_BT_NRESET, GPIOF_OUT_INIT_HIGH, "lcd bl enable" }, -}; - -static struct regulator_consumer_supply dummy_supplies[] = { - REGULATOR_SUPPLY("vddvario", "smsc911x.0"), - REGULATOR_SUPPLY("vdd33a", "smsc911x.0"), - REGULATOR_SUPPLY("vddvario", "smsc911x.1"), - REGULATOR_SUPPLY("vdd33a", "smsc911x.1"), -}; - -static void __init overo_init(void) -{ - int ret; - - if (strstr(boot_command_line, "omapdss.def_disp=lcd35")) - overo_use_lcd35 = true; - - regulator_register_fixed(0, dummy_supplies, ARRAY_SIZE(dummy_supplies)); - omap3_mux_init(board_mux, OMAP_PACKAGE_CBB); - overo_i2c_init(); - omap_hsmmc_init(mmc); - omap_serial_init(); - omap_sdrc_init(mt46h32m32lf6_sdrc_params, - mt46h32m32lf6_sdrc_params); - board_nand_init(overo_nand_partitions, - ARRAY_SIZE(overo_nand_partitions), NAND_CS, 0, NULL); - usb_bind_phy("musb-hdrc.0.auto", 0, "twl4030_usb"); - usb_musb_init(NULL); - - usbhs_init_phys(phy_data, ARRAY_SIZE(phy_data)); - usbhs_init(&usbhs_bdata); - overo_spi_init(); - overo_init_smsc911x(); - overo_init_led(); - overo_init_keys(); - omap_twl4030_audio_init("overo", NULL); - - overo_display_init(); - - /* Ensure SDRC pins are mux'd for self-refresh */ - omap_mux_init_signal("sdrc_cke0", OMAP_PIN_OUTPUT); - omap_mux_init_signal("sdrc_cke1", OMAP_PIN_OUTPUT); - - ret = gpio_request_one(OVERO_GPIO_W2W_NRESET, GPIOF_OUT_INIT_HIGH, - "OVERO_GPIO_W2W_NRESET"); - if (ret == 0) { - gpio_export(OVERO_GPIO_W2W_NRESET, 0); - gpio_set_value(OVERO_GPIO_W2W_NRESET, 0); - udelay(10); - gpio_set_value(OVERO_GPIO_W2W_NRESET, 1); - } else { - pr_err("could not obtain gpio for OVERO_GPIO_W2W_NRESET\n"); - } - - ret = gpio_request_array(overo_bt_gpios, ARRAY_SIZE(overo_bt_gpios)); - if (ret) { - pr_err("%s: could not obtain BT gpios\n", __func__); - } else { - gpio_export(OVERO_GPIO_BT_XGATE, 0); - gpio_export(OVERO_GPIO_BT_NRESET, 0); - gpio_set_value(OVERO_GPIO_BT_NRESET, 0); - mdelay(6); - gpio_set_value(OVERO_GPIO_BT_NRESET, 1); - } - - ret = gpio_request_one(OVERO_GPIO_USBH_CPEN, GPIOF_OUT_INIT_HIGH, - "OVERO_GPIO_USBH_CPEN"); - if (ret == 0) - gpio_export(OVERO_GPIO_USBH_CPEN, 0); - else - pr_err("could not obtain gpio for OVERO_GPIO_USBH_CPEN\n"); -} - -MACHINE_START(OVERO, "Gumstix Overo") - .atag_offset = 0x100, - .reserve = omap_reserve, - .map_io = omap3_map_io, - .init_early = omap35xx_init_early, - .init_irq = omap3_init_irq, - .init_machine = overo_init, - .init_late = omap35xx_init_late, - .init_time = omap3_sync32k_timer_init, - .restart = omap3xxx_restart, -MACHINE_END diff --git a/arch/arm/mach-omap2/clkt2xxx_virt_prcm_set.c b/arch/arm/mach-omap2/clkt2xxx_virt_prcm_set.c index 85e0b0c06..b64d717bf 100644 --- a/arch/arm/mach-omap2/clkt2xxx_virt_prcm_set.c +++ b/arch/arm/mach-omap2/clkt2xxx_virt_prcm_set.c @@ -232,14 +232,12 @@ void omap2xxx_clkt_vps_init(void) struct clk_hw_omap *hw = NULL; struct clk *clk; const char *parent_name = "mpu_ck"; - struct clk_lookup *lookup = NULL; omap2xxx_clkt_vps_late_init(); omap2xxx_clkt_vps_check_bootloader_rates(); hw = kzalloc(sizeof(*hw), GFP_KERNEL); - lookup = kzalloc(sizeof(*lookup), GFP_KERNEL); - if (!hw || !lookup) + if (!hw) goto cleanup; init.name = "virt_prcm_set"; init.ops = &virt_prcm_set_ops; @@ -249,15 +247,9 @@ void omap2xxx_clkt_vps_init(void) hw->hw.init = &init; clk = clk_register(NULL, &hw->hw); - - lookup->dev_id = NULL; - lookup->con_id = "cpufreq_ck"; - lookup->clk = clk; - - clkdev_add(lookup); + clkdev_create(clk, "cpufreq_ck", NULL); return; cleanup: kfree(hw); - kfree(lookup); } #endif diff --git a/arch/arm/mach-omap2/control.c b/arch/arm/mach-omap2/control.c index af95a624f..f00893027 100644 --- a/arch/arm/mach-omap2/control.c +++ b/arch/arm/mach-omap2/control.c @@ -112,6 +112,7 @@ struct omap3_control_regs { u32 csirxfe; u32 iva2_bootaddr; u32 iva2_bootmod; + u32 wkup_ctrl; u32 debobs_0; u32 debobs_1; u32 debobs_2; @@ -455,6 +456,7 @@ void omap3_control_save_context(void) omap_ctrl_readl(OMAP343X_CONTROL_IVA2_BOOTADDR); control_context.iva2_bootmod = omap_ctrl_readl(OMAP343X_CONTROL_IVA2_BOOTMOD); + control_context.wkup_ctrl = omap_ctrl_readl(OMAP34XX_CONTROL_WKUP_CTRL); control_context.debobs_0 = omap_ctrl_readl(OMAP343X_CONTROL_DEBOBS(0)); control_context.debobs_1 = omap_ctrl_readl(OMAP343X_CONTROL_DEBOBS(1)); control_context.debobs_2 = omap_ctrl_readl(OMAP343X_CONTROL_DEBOBS(2)); @@ -512,6 +514,7 @@ void omap3_control_restore_context(void) OMAP343X_CONTROL_IVA2_BOOTADDR); omap_ctrl_writel(control_context.iva2_bootmod, OMAP343X_CONTROL_IVA2_BOOTMOD); + omap_ctrl_writel(control_context.wkup_ctrl, OMAP34XX_CONTROL_WKUP_CTRL); omap_ctrl_writel(control_context.debobs_0, OMAP343X_CONTROL_DEBOBS(0)); omap_ctrl_writel(control_context.debobs_1, OMAP343X_CONTROL_DEBOBS(1)); omap_ctrl_writel(control_context.debobs_2, OMAP343X_CONTROL_DEBOBS(2)); diff --git a/arch/arm/mach-omap2/control.h b/arch/arm/mach-omap2/control.h index 80d2b7d8e..ec406bc2c 100644 --- a/arch/arm/mach-omap2/control.h +++ b/arch/arm/mach-omap2/control.h @@ -231,6 +231,9 @@ #define OMAP343X_PADCONF_ETK_D15 OMAP343X_PADCONF_ETK(17) /* 34xx GENERAL_WKUP register offsets */ +#define OMAP34XX_CONTROL_WKUP_CTRL (OMAP343X_CONTROL_GENERAL_WKUP - 0x4) +#define OMAP36XX_GPIO_IO_PWRDNZ BIT(6) + #define OMAP343X_CONTROL_WKUP_DEBOBSMUX(i) (OMAP343X_CONTROL_GENERAL_WKUP + \ 0x008 + (i)) #define OMAP343X_CONTROL_WKUP_DEBOBS0 (OMAP343X_CONTROL_GENERAL_WKUP + 0x008) diff --git a/arch/arm/mach-omap2/devices.c b/arch/arm/mach-omap2/devices.c index 990338fba..a69bd67e9 100644 --- a/arch/arm/mach-omap2/devices.c +++ b/arch/arm/mach-omap2/devices.c @@ -63,7 +63,7 @@ static int __init omap3_l3_init(void) WARN(IS_ERR(pdev), "could not build omap_device for %s\n", oh_name); - return PTR_RET(pdev); + return PTR_ERR_OR_ZERO(pdev); } omap_postcore_initcall(omap3_l3_init); @@ -333,6 +333,6 @@ static int __init omap_gpmc_init(void) pdev = omap_device_build("omap-gpmc", -1, oh, NULL, 0); WARN(IS_ERR(pdev), "could not build omap_device for %s\n", oh_name); - return PTR_RET(pdev); + return PTR_ERR_OR_ZERO(pdev); } omap_postcore_initcall(omap_gpmc_init); diff --git a/arch/arm/mach-omap2/display.c b/arch/arm/mach-omap2/display.c index f492ae147..6ab13d18c 100644 --- a/arch/arm/mach-omap2/display.c +++ b/arch/arm/mach-omap2/display.c @@ -287,6 +287,8 @@ static enum omapdss_version __init omap_display_get_version(void) return OMAPDSS_VER_OMAP5; else if (soc_is_am43xx()) return OMAPDSS_VER_AM43xx; + else if (soc_is_dra7xx()) + return OMAPDSS_VER_DRA7xx; else return OMAPDSS_VER_UNKNOWN; } @@ -568,25 +570,25 @@ void __init omapdss_early_init_of(void) } +static const char * const omapdss_compat_names[] __initconst = { + "ti,omap2-dss", + "ti,omap3-dss", + "ti,omap4-dss", + "ti,omap5-dss", + "ti,dra7-dss", +}; + struct device_node * __init omapdss_find_dss_of_node(void) { struct device_node *node; + int i; - node = of_find_compatible_node(NULL, NULL, "ti,omap2-dss"); - if (node) - return node; - - node = of_find_compatible_node(NULL, NULL, "ti,omap3-dss"); - if (node) - return node; - - node = of_find_compatible_node(NULL, NULL, "ti,omap4-dss"); - if (node) - return node; - - node = of_find_compatible_node(NULL, NULL, "ti,omap5-dss"); - if (node) - return node; + for (i = 0; i < ARRAY_SIZE(omapdss_compat_names); ++i) { + node = of_find_compatible_node(NULL, NULL, + omapdss_compat_names[i]); + if (node) + return node; + } return NULL; } diff --git a/arch/arm/mach-omap2/dma.c b/arch/arm/mach-omap2/dma.c index e1a56d875..1ed4be184 100644 --- a/arch/arm/mach-omap2/dma.c +++ b/arch/arm/mach-omap2/dma.c @@ -117,7 +117,6 @@ static void omap2_show_dma_caps(void) u8 revision = dma_read(REVISION, 0) & 0xff; printk(KERN_INFO "OMAP DMA hardware revision %d.%d\n", revision >> 4, revision & 0xf); - return; } static unsigned configure_dma_errata(void) diff --git a/arch/arm/mach-omap2/fb.c b/arch/arm/mach-omap2/fb.c index 26e28e94f..1f1ecf880 100644 --- a/arch/arm/mach-omap2/fb.c +++ b/arch/arm/mach-omap2/fb.c @@ -84,7 +84,7 @@ int __init omap_init_vrfb(void) pdev = platform_device_register_resndata(NULL, "omapvrfb", -1, res, num_res, NULL, 0); - return PTR_RET(pdev); + return PTR_ERR_OR_ZERO(pdev); } #else int __init omap_init_vrfb(void) { return 0; } diff --git a/arch/arm/mach-omap2/gpmc-onenand.c b/arch/arm/mach-omap2/gpmc-onenand.c index f899e77ff..17a6f752a 100644 --- a/arch/arm/mach-omap2/gpmc-onenand.c +++ b/arch/arm/mach-omap2/gpmc-onenand.c @@ -216,11 +216,11 @@ static void omap2_onenand_calc_sync_timings(struct gpmc_timings *t, div = gpmc_calc_divider(min_gpmc_clk_period); gpmc_clk_ns = gpmc_ticks_to_ns(div); - if (gpmc_clk_ns < 15) /* >66Mhz */ + if (gpmc_clk_ns < 15) /* >66MHz */ onenand_flags |= ONENAND_FLAG_HF; else onenand_flags &= ~ONENAND_FLAG_HF; - if (gpmc_clk_ns < 12) /* >83Mhz */ + if (gpmc_clk_ns < 12) /* >83MHz */ onenand_flags |= ONENAND_FLAG_VHF; else onenand_flags &= ~ONENAND_FLAG_VHF; diff --git a/arch/arm/mach-omap2/hsmmc.c b/arch/arm/mach-omap2/hsmmc.c index 9a8611ab5..cff079e56 100644 --- a/arch/arm/mach-omap2/hsmmc.c +++ b/arch/arm/mach-omap2/hsmmc.c @@ -70,7 +70,7 @@ static void omap_hsmmc1_before_set_reg(struct device *dev, reg = omap_ctrl_readl(control_pbias_offset); if (cpu_is_omap3630()) { - /* Set MMC I/O to 52Mhz */ + /* Set MMC I/O to 52MHz */ prog_io = omap_ctrl_readl(OMAP343X_CONTROL_PROG_IO1); prog_io |= OMAP3630_PRG_SDMMC1_SPEEDCTRL; omap_ctrl_writel(prog_io, OMAP343X_CONTROL_PROG_IO1); diff --git a/arch/arm/mach-omap2/hwspinlock.c b/arch/arm/mach-omap2/hwspinlock.c deleted file mode 100644 index ef175acae..000000000 --- a/arch/arm/mach-omap2/hwspinlock.c +++ /dev/null @@ -1,60 +0,0 @@ -/* - * OMAP hardware spinlock device initialization - * - * Copyright (C) 2010 Texas Instruments Incorporated - http://www.ti.com - * - * Contact: Simon Que <sque@ti.com> - * Hari Kanigeri <h-kanigeri2@ti.com> - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * version 2 as published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - */ - -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/err.h> -#include <linux/hwspinlock.h> - -#include "soc.h" -#include "omap_hwmod.h" -#include "omap_device.h" - -static struct hwspinlock_pdata omap_hwspinlock_pdata __initdata = { - .base_id = 0, -}; - -static int __init hwspinlocks_init(void) -{ - int retval = 0; - struct omap_hwmod *oh; - struct platform_device *pdev; - const char *oh_name = "spinlock"; - const char *dev_name = "omap_hwspinlock"; - - /* - * Hwmod lookup will fail in case our platform doesn't support the - * hardware spinlock module, so it is safe to run this initcall - * on all omaps - */ - oh = omap_hwmod_lookup(oh_name); - if (oh == NULL) - return -EINVAL; - - pdev = omap_device_build(dev_name, 0, oh, &omap_hwspinlock_pdata, - sizeof(struct hwspinlock_pdata)); - if (IS_ERR(pdev)) { - pr_err("Can't build omap_device for %s:%s\n", dev_name, - oh_name); - retval = PTR_ERR(pdev); - } - - return retval; -} -/* early board code might need to reserve specific hwspinlock instances */ -omap_postcore_initcall(hwspinlocks_init); diff --git a/arch/arm/mach-omap2/omap-wakeupgen.c b/arch/arm/mach-omap2/omap-wakeupgen.c index 3b56722df..e1d2e991d 100644 --- a/arch/arm/mach-omap2/omap-wakeupgen.c +++ b/arch/arm/mach-omap2/omap-wakeupgen.c @@ -392,6 +392,7 @@ static struct irq_chip wakeupgen_chip = { .irq_mask = wakeupgen_mask, .irq_unmask = wakeupgen_unmask, .irq_retrigger = irq_chip_retrigger_hierarchy, + .irq_set_type = irq_chip_set_type_parent, .flags = IRQCHIP_SKIP_SET_WAKE | IRQCHIP_MASK_ON_SUSPEND, #ifdef CONFIG_SMP .irq_set_affinity = irq_chip_set_affinity_parent, @@ -444,7 +445,7 @@ static int wakeupgen_domain_alloc(struct irq_domain *domain, return irq_domain_alloc_irqs_parent(domain, virq, nr_irqs, &parent_args); } -static struct irq_domain_ops wakeupgen_domain_ops = { +static const struct irq_domain_ops wakeupgen_domain_ops = { .xlate = wakeupgen_domain_xlate, .alloc = wakeupgen_domain_alloc, .free = irq_domain_free_irqs_common, diff --git a/arch/arm/mach-omap2/omap_device.c b/arch/arm/mach-omap2/omap_device.c index 166b18f51..4cb8fd9f7 100644 --- a/arch/arm/mach-omap2/omap_device.c +++ b/arch/arm/mach-omap2/omap_device.c @@ -47,7 +47,7 @@ static void _add_clkdev(struct omap_device *od, const char *clk_alias, const char *clk_name) { struct clk *r; - struct clk_lookup *l; + int rc; if (!clk_alias || !clk_name) return; @@ -62,21 +62,15 @@ static void _add_clkdev(struct omap_device *od, const char *clk_alias, return; } - r = clk_get(NULL, clk_name); - if (IS_ERR(r)) { - dev_err(&od->pdev->dev, - "clk_get for %s failed\n", clk_name); - return; - } - - l = clkdev_alloc(r, clk_alias, dev_name(&od->pdev->dev)); - if (!l) { - dev_err(&od->pdev->dev, - "clkdev_alloc for %s failed\n", clk_alias); - return; + rc = clk_add_alias(clk_alias, dev_name(&od->pdev->dev), clk_name, NULL); + if (rc) { + if (rc == -ENODEV || rc == -ENOMEM) + dev_err(&od->pdev->dev, + "clkdev_alloc for %s failed\n", clk_alias); + else + dev_err(&od->pdev->dev, + "clk_get for %s failed\n", clk_name); } - - clkdev_add(l); } /** @@ -224,13 +218,13 @@ static int _omap_device_notifier_call(struct notifier_block *nb, */ static int _omap_device_enable_hwmods(struct omap_device *od) { + int ret = 0; int i; for (i = 0; i < od->hwmods_cnt; i++) - omap_hwmod_enable(od->hwmods[i]); + ret |= omap_hwmod_enable(od->hwmods[i]); - /* XXX pass along return value here? */ - return 0; + return ret; } /** @@ -241,13 +235,13 @@ static int _omap_device_enable_hwmods(struct omap_device *od) */ static int _omap_device_idle_hwmods(struct omap_device *od) { + int ret = 0; int i; for (i = 0; i < od->hwmods_cnt; i++) - omap_hwmod_idle(od->hwmods[i]); + ret |= omap_hwmod_idle(od->hwmods[i]); - /* XXX pass along return value here? */ - return 0; + return ret; } /* Public functions for use by core code */ @@ -595,18 +589,20 @@ static int _od_runtime_suspend(struct device *dev) int ret; ret = pm_generic_runtime_suspend(dev); + if (ret) + return ret; - if (!ret) - omap_device_idle(pdev); - - return ret; + return omap_device_idle(pdev); } static int _od_runtime_resume(struct device *dev) { struct platform_device *pdev = to_platform_device(dev); + int ret; - omap_device_enable(pdev); + ret = omap_device_enable(pdev); + if (ret) + return ret; return pm_generic_runtime_resume(dev); } @@ -688,11 +684,8 @@ struct dev_pm_domain omap_device_pm_domain = { SET_RUNTIME_PM_OPS(_od_runtime_suspend, _od_runtime_resume, NULL) USE_PLATFORM_PM_SLEEP_OPS - .suspend_noirq = _od_suspend_noirq, - .resume_noirq = _od_resume_noirq, - .freeze_noirq = _od_suspend_noirq, - .thaw_noirq = _od_resume_noirq, - .restore_noirq = _od_resume_noirq, + SET_NOIRQ_SYSTEM_SLEEP_PM_OPS(_od_suspend_noirq, + _od_resume_noirq) } }; @@ -743,7 +736,8 @@ int omap_device_enable(struct platform_device *pdev) ret = _omap_device_enable_hwmods(od); - od->_state = OMAP_DEVICE_STATE_ENABLED; + if (ret == 0) + od->_state = OMAP_DEVICE_STATE_ENABLED; return ret; } @@ -773,7 +767,8 @@ int omap_device_idle(struct platform_device *pdev) ret = _omap_device_idle_hwmods(od); - od->_state = OMAP_DEVICE_STATE_IDLE; + if (ret == 0) + od->_state = OMAP_DEVICE_STATE_IDLE; return ret; } diff --git a/arch/arm/mach-omap2/omap_hwmod.c b/arch/arm/mach-omap2/omap_hwmod.c index 5286e7773..486cc4ded 100644 --- a/arch/arm/mach-omap2/omap_hwmod.c +++ b/arch/arm/mach-omap2/omap_hwmod.c @@ -3326,16 +3326,17 @@ int omap_hwmod_enable(struct omap_hwmod *oh) */ int omap_hwmod_idle(struct omap_hwmod *oh) { + int r; unsigned long flags; if (!oh) return -EINVAL; spin_lock_irqsave(&oh->_lock, flags); - _idle(oh); + r = _idle(oh); spin_unlock_irqrestore(&oh->_lock, flags); - return 0; + return r; } /** @@ -3348,16 +3349,17 @@ int omap_hwmod_idle(struct omap_hwmod *oh) */ int omap_hwmod_shutdown(struct omap_hwmod *oh) { + int r; unsigned long flags; if (!oh) return -EINVAL; spin_lock_irqsave(&oh->_lock, flags); - _shutdown(oh); + r = _shutdown(oh); spin_unlock_irqrestore(&oh->_lock, flags); - return 0; + return r; } /* diff --git a/arch/arm/mach-omap2/omap_hwmod.h b/arch/arm/mach-omap2/omap_hwmod.h index 9611c91d9..b5d27ec81 100644 --- a/arch/arm/mach-omap2/omap_hwmod.h +++ b/arch/arm/mach-omap2/omap_hwmod.h @@ -109,6 +109,12 @@ extern struct omap_hwmod_sysc_fields omap_hwmod_sysc_type3; #define DEBUG_OMAPUART_FLAGS (HWMOD_INIT_NO_IDLE | HWMOD_INIT_NO_RESET) +#ifdef CONFIG_OMAP_GPMC_DEBUG +#define DEBUG_OMAP_GPMC_HWMOD_FLAGS HWMOD_INIT_NO_RESET +#else +#define DEBUG_OMAP_GPMC_HWMOD_FLAGS 0 +#endif + #if defined(CONFIG_DEBUG_OMAP2UART1) #undef DEBUG_OMAP2UART1_FLAGS #define DEBUG_OMAP2UART1_FLAGS DEBUG_OMAPUART_FLAGS diff --git a/arch/arm/mach-omap2/omap_hwmod_2xxx_ipblock_data.c b/arch/arm/mach-omap2/omap_hwmod_2xxx_ipblock_data.c index 8821b9d6b..6dcfd03ce 100644 --- a/arch/arm/mach-omap2/omap_hwmod_2xxx_ipblock_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_2xxx_ipblock_data.c @@ -762,16 +762,8 @@ struct omap_hwmod omap2xxx_gpmc_hwmod = { .name = "gpmc", .class = &omap2xxx_gpmc_hwmod_class, .main_clk = "gpmc_fck", - /* - * XXX HWMOD_INIT_NO_RESET should not be needed for this IP - * block. It is not being added due to any known bugs with - * resetting the GPMC IP block, but rather because any timings - * set by the bootloader are not being correctly programmed by - * the kernel from the board file or DT data. - * HWMOD_INIT_NO_RESET should be removed ASAP. - */ - .flags = (HWMOD_INIT_NO_IDLE | HWMOD_INIT_NO_RESET | - HWMOD_NO_IDLEST), + /* Skip reset for CONFIG_OMAP_GPMC_DEBUG for bootloader timings */ + .flags = HWMOD_NO_IDLEST | DEBUG_OMAP_GPMC_HWMOD_FLAGS, .prcm = { .omap2 = { .prcm_reg_id = 3, diff --git a/arch/arm/mach-omap2/omap_hwmod_33xx_43xx_common_data.h b/arch/arm/mach-omap2/omap_hwmod_33xx_43xx_common_data.h index 130332c05..7f737965f 100644 --- a/arch/arm/mach-omap2/omap_hwmod_33xx_43xx_common_data.h +++ b/arch/arm/mach-omap2/omap_hwmod_33xx_43xx_common_data.h @@ -145,6 +145,7 @@ extern struct omap_hwmod am33xx_uart5_hwmod; extern struct omap_hwmod am33xx_uart6_hwmod; extern struct omap_hwmod am33xx_wd_timer1_hwmod; +extern struct omap_hwmod_class am33xx_emif_hwmod_class; extern struct omap_hwmod_class am33xx_l4_hwmod_class; extern struct omap_hwmod_class am33xx_wkup_m3_hwmod_class; extern struct omap_hwmod_class am33xx_control_hwmod_class; diff --git a/arch/arm/mach-omap2/omap_hwmod_33xx_43xx_ipblock_data.c b/arch/arm/mach-omap2/omap_hwmod_33xx_43xx_ipblock_data.c index cabc5695b..907a452b7 100644 --- a/arch/arm/mach-omap2/omap_hwmod_33xx_43xx_ipblock_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_33xx_43xx_ipblock_data.c @@ -203,6 +203,19 @@ struct omap_hwmod am33xx_prcm_hwmod = { }; /* + * 'emif' class + * instance(s): emif + */ +static struct omap_hwmod_class_sysconfig am33xx_emif_sysc = { + .rev_offs = 0x0000, +}; + +struct omap_hwmod_class am33xx_emif_hwmod_class = { + .name = "emif", + .sysc = &am33xx_emif_sysc, +}; + +/* * 'aes0' class */ static struct omap_hwmod_class_sysconfig am33xx_aes0_sysc = { @@ -668,7 +681,8 @@ struct omap_hwmod am33xx_gpmc_hwmod = { .name = "gpmc", .class = &am33xx_gpmc_hwmod_class, .clkdm_name = "l3s_clkdm", - .flags = (HWMOD_INIT_NO_IDLE | HWMOD_INIT_NO_RESET), + /* Skip reset for CONFIG_OMAP_GPMC_DEBUG for bootloader timings */ + .flags = DEBUG_OMAP_GPMC_HWMOD_FLAGS, .main_clk = "l3s_gclk", .prcm = { .omap4 = { diff --git a/arch/arm/mach-omap2/omap_hwmod_33xx_data.c b/arch/arm/mach-omap2/omap_hwmod_33xx_data.c index 0cf7b563d..cc0791d91 100644 --- a/arch/arm/mach-omap2/omap_hwmod_33xx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_33xx_data.c @@ -34,19 +34,6 @@ * IP blocks */ -/* - * 'emif' class - * instance(s): emif - */ -static struct omap_hwmod_class_sysconfig am33xx_emif_sysc = { - .rev_offs = 0x0000, -}; - -static struct omap_hwmod_class am33xx_emif_hwmod_class = { - .name = "emif", - .sysc = &am33xx_emif_sysc, -}; - /* emif */ static struct omap_hwmod am33xx_emif_hwmod = { .name = "emif", diff --git a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c index 4e8e93c39..dc55f8ded 100644 --- a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c @@ -2169,16 +2169,8 @@ static struct omap_hwmod omap3xxx_gpmc_hwmod = { .clkdm_name = "core_l3_clkdm", .mpu_irqs = omap3xxx_gpmc_irqs, .main_clk = "gpmc_fck", - /* - * XXX HWMOD_INIT_NO_RESET should not be needed for this IP - * block. It is not being added due to any known bugs with - * resetting the GPMC IP block, but rather because any timings - * set by the bootloader are not being correctly programmed by - * the kernel from the board file or DT data. - * HWMOD_INIT_NO_RESET should be removed ASAP. - */ - .flags = (HWMOD_INIT_NO_IDLE | HWMOD_INIT_NO_RESET | - HWMOD_NO_IDLEST), + /* Skip reset for CONFIG_OMAP_GPMC_DEBUG for bootloader timings */ + .flags = HWMOD_NO_IDLEST | DEBUG_OMAP_GPMC_HWMOD_FLAGS, }; /* @@ -3744,29 +3736,54 @@ static struct omap_hwmod_ocp_if *omap3xxx_hwmod_ocp_ifs[] __initdata = { /* GP-only hwmod links */ static struct omap_hwmod_ocp_if *omap34xx_gp_hwmod_ocp_ifs[] __initdata = { &omap3xxx_l4_sec__timer12, - &omap3xxx_l4_core__sham, - &omap3xxx_l4_core__aes, NULL }; static struct omap_hwmod_ocp_if *omap36xx_gp_hwmod_ocp_ifs[] __initdata = { &omap3xxx_l4_sec__timer12, - &omap3xxx_l4_core__sham, - &omap3xxx_l4_core__aes, NULL }; static struct omap_hwmod_ocp_if *am35xx_gp_hwmod_ocp_ifs[] __initdata = { &omap3xxx_l4_sec__timer12, - /* - * Apparently the SHA/MD5 and AES accelerator IP blocks are - * only present on some AM35xx chips, and no one knows which - * ones. See - * http://www.spinics.net/lists/arm-kernel/msg215466.html So - * if you need these IP blocks on an AM35xx, try uncommenting - * the following lines. - */ + NULL +}; + +/* crypto hwmod links */ +static struct omap_hwmod_ocp_if *omap34xx_sham_hwmod_ocp_ifs[] __initdata = { + &omap3xxx_l4_core__sham, + NULL +}; + +static struct omap_hwmod_ocp_if *omap34xx_aes_hwmod_ocp_ifs[] __initdata = { + &omap3xxx_l4_core__aes, + NULL +}; + +static struct omap_hwmod_ocp_if *omap36xx_sham_hwmod_ocp_ifs[] __initdata = { + &omap3xxx_l4_core__sham, + NULL +}; + +static struct omap_hwmod_ocp_if *omap36xx_aes_hwmod_ocp_ifs[] __initdata = { + &omap3xxx_l4_core__aes, + NULL +}; + +/* + * Apparently the SHA/MD5 and AES accelerator IP blocks are + * only present on some AM35xx chips, and no one knows which + * ones. See + * http://www.spinics.net/lists/arm-kernel/msg215466.html So + * if you need these IP blocks on an AM35xx, try uncommenting + * the following lines. + */ +static struct omap_hwmod_ocp_if *am35xx_sham_hwmod_ocp_ifs[] __initdata = { /* &omap3xxx_l4_core__sham, */ + NULL +}; + +static struct omap_hwmod_ocp_if *am35xx_aes_hwmod_ocp_ifs[] __initdata = { /* &omap3xxx_l4_core__aes, */ NULL }; @@ -3868,10 +3885,41 @@ static struct omap_hwmod_ocp_if *omap3xxx_dss_hwmod_ocp_ifs[] __initdata = { NULL }; +/** + * omap3xxx_hwmod_is_hs_ip_block_usable - is a security IP block accessible? + * @bus: struct device_node * for the top-level OMAP DT data + * @dev_name: device name used in the DT file + * + * Determine whether a "secure" IP block @dev_name is usable by Linux. + * There doesn't appear to be a 100% reliable way to determine this, + * so we rely on heuristics. If @bus is null, meaning there's no DT + * data, then we only assume the IP block is accessible if the OMAP is + * fused as a 'general-purpose' SoC. If however DT data is present, + * test to see if the IP block is described in the DT data and set to + * 'status = "okay"'. If so then we assume the ODM has configured the + * OMAP firewalls to allow access to the IP block. + * + * Return: 0 if device named @dev_name is not likely to be accessible, + * or 1 if it is likely to be accessible. + */ +static int __init omap3xxx_hwmod_is_hs_ip_block_usable(struct device_node *bus, + const char *dev_name) +{ + if (!bus) + return (omap_type() == OMAP2_DEVICE_TYPE_GP) ? 1 : 0; + + if (of_device_is_available(of_find_node_by_name(bus, dev_name))) + return 1; + + return 0; +} + int __init omap3xxx_hwmod_init(void) { int r; - struct omap_hwmod_ocp_if **h = NULL, **h_gp = NULL; + struct omap_hwmod_ocp_if **h = NULL, **h_gp = NULL, **h_sham = NULL; + struct omap_hwmod_ocp_if **h_aes = NULL; + struct device_node *bus = NULL; unsigned int rev; omap_hwmod_init(); @@ -3893,13 +3941,19 @@ int __init omap3xxx_hwmod_init(void) rev == OMAP3430_REV_ES3_1 || rev == OMAP3430_REV_ES3_1_2) { h = omap34xx_hwmod_ocp_ifs; h_gp = omap34xx_gp_hwmod_ocp_ifs; + h_sham = omap34xx_sham_hwmod_ocp_ifs; + h_aes = omap34xx_aes_hwmod_ocp_ifs; } else if (rev == AM35XX_REV_ES1_0 || rev == AM35XX_REV_ES1_1) { h = am35xx_hwmod_ocp_ifs; h_gp = am35xx_gp_hwmod_ocp_ifs; + h_sham = am35xx_sham_hwmod_ocp_ifs; + h_aes = am35xx_aes_hwmod_ocp_ifs; } else if (rev == OMAP3630_REV_ES1_0 || rev == OMAP3630_REV_ES1_1 || rev == OMAP3630_REV_ES1_2) { h = omap36xx_hwmod_ocp_ifs; h_gp = omap36xx_gp_hwmod_ocp_ifs; + h_sham = omap36xx_sham_hwmod_ocp_ifs; + h_aes = omap36xx_aes_hwmod_ocp_ifs; } else { WARN(1, "OMAP3 hwmod family init: unknown chip type\n"); return -EINVAL; @@ -3916,6 +3970,25 @@ int __init omap3xxx_hwmod_init(void) return r; } + /* + * Register crypto hwmod links only if they are not disabled in DT. + * If DT information is missing, enable them only for GP devices. + */ + + if (of_have_populated_dt()) + bus = of_find_node_by_name(NULL, "ocp"); + + if (h_sham && omap3xxx_hwmod_is_hs_ip_block_usable(bus, "sham")) { + r = omap_hwmod_register_links(h_sham); + if (r < 0) + return r; + } + + if (h_aes && omap3xxx_hwmod_is_hs_ip_block_usable(bus, "aes")) { + r = omap_hwmod_register_links(h_aes); + if (r < 0) + return r; + } /* * Register hwmod links specific to certain ES levels of a diff --git a/arch/arm/mach-omap2/omap_hwmod_43xx_data.c b/arch/arm/mach-omap2/omap_hwmod_43xx_data.c index 17e8004fc..215d5efa0 100644 --- a/arch/arm/mach-omap2/omap_hwmod_43xx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_43xx_data.c @@ -24,6 +24,20 @@ /* IP blocks */ +static struct omap_hwmod am43xx_emif_hwmod = { + .name = "emif", + .class = &am33xx_emif_hwmod_class, + .clkdm_name = "emif_clkdm", + .flags = HWMOD_INIT_NO_IDLE, + .main_clk = "dpll_ddr_m2_ck", + .prcm = { + .omap4 = { + .clkctrl_offs = AM43XX_CM_PER_EMIF_CLKCTRL_OFFSET, + .modulemode = MODULEMODE_SWCTRL, + }, + }, +}; + static struct omap_hwmod am43xx_l4_hs_hwmod = { .name = "l4_hs", .class = &am33xx_l4_hwmod_class, @@ -583,6 +597,13 @@ static struct omap_hwmod am43xx_vpfe1_hwmod = { }; /* Interfaces */ +static struct omap_hwmod_ocp_if am43xx_l3_main__emif = { + .master = &am33xx_l3_main_hwmod, + .slave = &am43xx_emif_hwmod, + .clk = "dpll_core_m4_ck", + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + static struct omap_hwmod_ocp_if am43xx_l3_main__l4_hs = { .master = &am33xx_l3_main_hwmod, .slave = &am43xx_l4_hs_hwmod, @@ -918,6 +939,7 @@ static struct omap_hwmod_ocp_if *am43xx_hwmod_ocp_ifs[] __initdata = { &am33xx_l3_main__l3_instr, &am33xx_l3_main__gfx, &am33xx_l3_s__l3_main, + &am43xx_l3_main__emif, &am33xx_pruss__l3_main, &am43xx_wkup_m3__l4_wkup, &am33xx_gfx__l3_main, diff --git a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c index f5e68a782..43eebf2c5 100644 --- a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c @@ -1188,15 +1188,8 @@ static struct omap_hwmod omap44xx_gpmc_hwmod = { .name = "gpmc", .class = &omap44xx_gpmc_hwmod_class, .clkdm_name = "l3_2_clkdm", - /* - * XXX HWMOD_INIT_NO_RESET should not be needed for this IP - * block. It is not being added due to any known bugs with - * resetting the GPMC IP block, but rather because any timings - * set by the bootloader are not being correctly programmed by - * the kernel from the board file or DT data. - * HWMOD_INIT_NO_RESET should be removed ASAP. - */ - .flags = HWMOD_INIT_NO_IDLE | HWMOD_INIT_NO_RESET, + /* Skip reset for CONFIG_OMAP_GPMC_DEBUG for bootloader timings */ + .flags = DEBUG_OMAP_GPMC_HWMOD_FLAGS, .prcm = { .omap4 = { .clkctrl_offs = OMAP4_CM_L3_2_GPMC_CLKCTRL_OFFSET, diff --git a/arch/arm/mach-omap2/omap_hwmod_7xx_data.c b/arch/arm/mach-omap2/omap_hwmod_7xx_data.c index 0e64c2fac..562247bce 100644 --- a/arch/arm/mach-omap2/omap_hwmod_7xx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_7xx_data.c @@ -49,6 +49,27 @@ */ /* + * 'dmm' class + * instance(s): dmm + */ +static struct omap_hwmod_class dra7xx_dmm_hwmod_class = { + .name = "dmm", +}; + +/* dmm */ +static struct omap_hwmod dra7xx_dmm_hwmod = { + .name = "dmm", + .class = &dra7xx_dmm_hwmod_class, + .clkdm_name = "emif_clkdm", + .prcm = { + .omap4 = { + .clkctrl_offs = DRA7XX_CM_EMIF_DMM_CLKCTRL_OFFSET, + .context_offs = DRA7XX_RM_EMIF_DMM_CONTEXT_OFFSET, + }, + }, +}; + +/* * 'l3' class * instance(s): l3_instr, l3_main_1, l3_main_2 */ @@ -438,6 +459,7 @@ static struct omap_hwmod_opt_clk dss_opt_clks[] = { { .role = "video2_clk", .clk = "dss_video2_clk" }, { .role = "video1_clk", .clk = "dss_video1_clk" }, { .role = "hdmi_clk", .clk = "dss_hdmi_clk" }, + { .role = "hdcp_clk", .clk = "dss_deshdcp_clk" }, }; static struct omap_hwmod dra7xx_dss_hwmod = { @@ -500,6 +522,7 @@ static struct omap_hwmod dra7xx_dss_dispc_hwmod = { }, }, .dev_attr = &dss_dispc_dev_attr, + .parent_hwmod = &dra7xx_dss_hwmod, }; /* @@ -541,6 +564,7 @@ static struct omap_hwmod dra7xx_dss_hdmi_hwmod = { }, .opt_clks = dss_hdmi_opt_clks, .opt_clks_cnt = ARRAY_SIZE(dss_hdmi_opt_clks), + .parent_hwmod = &dra7xx_dss_hwmod, }; /* @@ -803,8 +827,7 @@ static struct omap_hwmod_class_sysconfig dra7xx_gpmc_sysc = { .syss_offs = 0x0014, .sysc_flags = (SYSC_HAS_AUTOIDLE | SYSC_HAS_SIDLEMODE | SYSC_HAS_SOFTRESET | SYSS_HAS_RESET_STATUS), - .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART | - SIDLE_SMART_WKUP), + .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART), .sysc_fields = &omap_hwmod_sysc_type1, }; @@ -819,8 +842,8 @@ static struct omap_hwmod dra7xx_gpmc_hwmod = { .name = "gpmc", .class = &dra7xx_gpmc_hwmod_class, .clkdm_name = "l3main1_clkdm", - .flags = (HWMOD_INIT_NO_IDLE | HWMOD_INIT_NO_RESET | - HWMOD_SWSUP_SIDLE), + /* Skip reset for CONFIG_OMAP_GPMC_DEBUG for bootloader timings */ + .flags = DEBUG_OMAP_GPMC_HWMOD_FLAGS, .main_clk = "l3_iclk_div", .prcm = { .omap4 = { @@ -2321,6 +2344,14 @@ static struct omap_hwmod dra7xx_wd_timer2_hwmod = { * Interfaces */ +/* l3_main_1 -> dmm */ +static struct omap_hwmod_ocp_if dra7xx_l3_main_1__dmm = { + .master = &dra7xx_l3_main_1_hwmod, + .slave = &dra7xx_dmm_hwmod, + .clk = "l3_iclk_div", + .user = OCP_USER_SDMA, +}; + /* l3_main_2 -> l3_instr */ static struct omap_hwmod_ocp_if dra7xx_l3_main_2__l3_instr = { .master = &dra7xx_l3_main_2_hwmod, @@ -3289,6 +3320,7 @@ static struct omap_hwmod_ocp_if dra7xx_l4_wkup__wd_timer2 = { }; static struct omap_hwmod_ocp_if *dra7xx_hwmod_ocp_ifs[] __initdata = { + &dra7xx_l3_main_1__dmm, &dra7xx_l3_main_2__l3_instr, &dra7xx_l4_cfg__l3_main_1, &dra7xx_mpu__l3_main_1, diff --git a/arch/arm/mach-omap2/omap_hwmod_81xx_data.c b/arch/arm/mach-omap2/omap_hwmod_81xx_data.c index cab1eb61a..c92413769 100644 --- a/arch/arm/mach-omap2/omap_hwmod_81xx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_81xx_data.c @@ -478,6 +478,8 @@ static struct omap_hwmod dm81xx_gpmc_hwmod = { .clkdm_name = "alwon_l3s_clkdm", .class = &dm81xx_gpmc_hwmod_class, .main_clk = "sysclk6_ck", + /* Skip reset for CONFIG_OMAP_GPMC_DEBUG for bootloader timings */ + .flags = DEBUG_OMAP_GPMC_HWMOD_FLAGS, .prcm = { .omap4 = { .clkctrl_offs = DM816X_CM_ALWON_GPMC_CLKCTRL, diff --git a/arch/arm/mach-omap2/opp2430_data.c b/arch/arm/mach-omap2/opp2430_data.c index 0e75ec3e1..b2233b72b 100644 --- a/arch/arm/mach-omap2/opp2430_data.c +++ b/arch/arm/mach-omap2/opp2430_data.c @@ -116,7 +116,7 @@ const struct prcm_config omap2430_rate_table[] = { RATE_IN_243X}, /* PRCM-boot/bypass */ - {S13M, S13M, S13M, RB_CM_CLKSEL_MPU_VAL, /* 13Mhz */ + {S13M, S13M, S13M, RB_CM_CLKSEL_MPU_VAL, /* 13MHz */ RB_CM_CLKSEL_DSP_VAL, RB_CM_CLKSEL_GFX_VAL, RB_CM_CLKSEL1_CORE_VAL, MB_CM_CLKSEL1_PLL_13_VAL, MX_CLKSEL2_PLL_2x_VAL, RB_CM_CLKSEL_MDM_VAL, @@ -124,7 +124,7 @@ const struct prcm_config omap2430_rate_table[] = { RATE_IN_243X}, /* PRCM-boot/bypass */ - {S12M, S12M, S12M, RB_CM_CLKSEL_MPU_VAL, /* 12Mhz */ + {S12M, S12M, S12M, RB_CM_CLKSEL_MPU_VAL, /* 12MHz */ RB_CM_CLKSEL_DSP_VAL, RB_CM_CLKSEL_GFX_VAL, RB_CM_CLKSEL1_CORE_VAL, MB_CM_CLKSEL1_PLL_12_VAL, MX_CLKSEL2_PLL_2x_VAL, RB_CM_CLKSEL_MDM_VAL, diff --git a/arch/arm/mach-omap2/pdata-quirks.c b/arch/arm/mach-omap2/pdata-quirks.c index af11511dd..821171cf6 100644 --- a/arch/arm/mach-omap2/pdata-quirks.c +++ b/arch/arm/mach-omap2/pdata-quirks.c @@ -44,6 +44,27 @@ static void __init omap2420_n8x0_legacy_init(void) #endif #ifdef CONFIG_ARCH_OMAP3 +/* + * Configures GPIOs 126, 127 and 129 to 1.8V mode instead of 3.0V + * mode for MMC1 in case bootloader did not configure things. + * Note that if the pins are used for MMC1, pbias-regulator + * manages the IO voltage. + */ +static void __init omap3_gpio126_127_129(void) +{ + u32 reg; + + reg = omap_ctrl_readl(OMAP343X_CONTROL_PBIAS_LITE); + reg &= ~OMAP343X_PBIASLITEVMODE1; + reg |= OMAP343X_PBIASLITEPWRDNZ1; + omap_ctrl_writel(reg, OMAP343X_CONTROL_PBIAS_LITE); + if (cpu_is_omap3630()) { + reg = omap_ctrl_readl(OMAP34XX_CONTROL_WKUP_CTRL); + reg |= OMAP36XX_GPIO_IO_PWRDNZ; + omap_ctrl_writel(reg, OMAP34XX_CONTROL_WKUP_CTRL); + } +} + static void __init hsmmc2_internal_input_clk(void) { u32 reg; @@ -356,6 +377,7 @@ static struct pdata_init pdata_quirks[] __initdata = { { "nokia,omap3-n950", hsmmc2_internal_input_clk, }, { "isee,omap3-igep0020-rev-f", omap3_igep0020_rev_f_legacy_init, }, { "isee,omap3-igep0030-rev-g", omap3_igep0030_rev_g_legacy_init, }, + { "logicpd,dm3730-torpedo-devkit", omap3_gpio126_127_129, }, { "ti,omap3-evm-37xx", omap3_evm_legacy_init, }, { "ti,am3517-evm", am3517_evm_legacy_init, }, { "technexion,omap3-tao3530", omap3_tao3530_legacy_init, }, diff --git a/arch/arm/mach-omap2/pmu.c b/arch/arm/mach-omap2/pmu.c index a69e9a33c..d2adfebd3 100644 --- a/arch/arm/mach-omap2/pmu.c +++ b/arch/arm/mach-omap2/pmu.c @@ -55,7 +55,7 @@ static int __init omap2_init_pmu(unsigned oh_num, char *oh_names[]) WARN(IS_ERR(omap_pmu_dev), "Can't build omap_device for %s.\n", dev_name); - return PTR_RET(omap_pmu_dev); + return PTR_ERR_OR_ZERO(omap_pmu_dev); } static int __init omap_init_pmu(void) diff --git a/arch/arm/mach-omap2/prcm43xx.h b/arch/arm/mach-omap2/prcm43xx.h index d0261996d..7eebc27fa 100644 --- a/arch/arm/mach-omap2/prcm43xx.h +++ b/arch/arm/mach-omap2/prcm43xx.h @@ -146,4 +146,6 @@ #define AM43XX_CM_PER_HDQ1W_CLKCTRL_OFFSET 0x04a0 #define AM43XX_CM_PER_VPFE0_CLKCTRL_OFFSET 0x0068 #define AM43XX_CM_PER_VPFE1_CLKCTRL_OFFSET 0x0070 +#define AM43XX_CM_PER_EMIF_CLKCTRL_OFFSET 0x0720 + #endif diff --git a/arch/arm/mach-omap2/sdrc2xxx.c b/arch/arm/mach-omap2/sdrc2xxx.c index ae3f15531..339b0ecb7 100644 --- a/arch/arm/mach-omap2/sdrc2xxx.c +++ b/arch/arm/mach-omap2/sdrc2xxx.c @@ -164,6 +164,6 @@ void omap2xxx_sdrc_init_params(u32 force_lock_to_unlock_mode) mem_timings.slow_dll_ctrl |= ((mem_timings.fast_dll_ctrl & 0xF) | (1 << 2)); - /* 90 degree phase for anything below 133Mhz + disable DLL filter */ + /* 90 degree phase for anything below 133MHz + disable DLL filter */ mem_timings.slow_dll_ctrl |= ((1 << 1) | (3 << 8)); } diff --git a/arch/arm/mach-omap2/serial.c b/arch/arm/mach-omap2/serial.c index 57dee0c7c..5fb50fe54 100644 --- a/arch/arm/mach-omap2/serial.c +++ b/arch/arm/mach-omap2/serial.c @@ -203,7 +203,7 @@ static int __init omap_serial_early_init(void) if (cmdline_find_option(uart_name)) { console_uart_id = uart->num; - if (console_loglevel >= 10) { + if (console_loglevel >= CONSOLE_LOGLEVEL_DEBUG) { uart_debug = true; pr_info("%s used as console in debug mode: uart%d clocks will not be gated", uart_name, uart->num); diff --git a/arch/arm/mach-omap2/sram242x.S b/arch/arm/mach-omap2/sram242x.S index 2c88ff2d0..53a2537cd 100644 --- a/arch/arm/mach-omap2/sram242x.S +++ b/arch/arm/mach-omap2/sram242x.S @@ -64,7 +64,7 @@ ENTRY(omap242x_sram_ddr_init) mvn r9, #0x4 @ mask to get clear bit2 and r10, r10, r9 @ clear bit2 for lock mode. orr r10, r10, #0x8 @ make sure DLL on (es2 bit pos) - orr r10, r10, #0x2 @ 90 degree phase for all below 133Mhz + orr r10, r10, #0x2 @ 90 degree phase for all below 133MHz str r10, [r11] @ commit to DLLA_CTRL bl i_dll_wait @ wait for dll to lock diff --git a/arch/arm/mach-omap2/sram243x.S b/arch/arm/mach-omap2/sram243x.S index d5deb9761..b3edd6f7f 100644 --- a/arch/arm/mach-omap2/sram243x.S +++ b/arch/arm/mach-omap2/sram243x.S @@ -64,7 +64,7 @@ ENTRY(omap243x_sram_ddr_init) mvn r9, #0x4 @ mask to get clear bit2 and r10, r10, r9 @ clear bit2 for lock mode. orr r10, r10, #0x8 @ make sure DLL on (es2 bit pos) - orr r10, r10, #0x2 @ 90 degree phase for all below 133Mhz + orr r10, r10, #0x2 @ 90 degree phase for all below 133MHz str r10, [r11] @ commit to DLLA_CTRL bl i_dll_wait @ wait for dll to lock |