summaryrefslogtreecommitdiff
path: root/arch/arm/mach-orion5x/ts209-setup.c
diff options
context:
space:
mode:
Diffstat (limited to 'arch/arm/mach-orion5x/ts209-setup.c')
-rw-r--r--arch/arm/mach-orion5x/ts209-setup.c334
1 files changed, 334 insertions, 0 deletions
diff --git a/arch/arm/mach-orion5x/ts209-setup.c b/arch/arm/mach-orion5x/ts209-setup.c
new file mode 100644
index 000000000..c725b7cb9
--- /dev/null
+++ b/arch/arm/mach-orion5x/ts209-setup.c
@@ -0,0 +1,334 @@
+/*
+ * QNAP TS-109/TS-209 Board Setup
+ *
+ * Maintainer: Byron Bradley <byron.bbradley@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+#include <linux/gpio.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/pci.h>
+#include <linux/irq.h>
+#include <linux/mtd/physmap.h>
+#include <linux/mtd/nand.h>
+#include <linux/mv643xx_eth.h>
+#include <linux/gpio_keys.h>
+#include <linux/input.h>
+#include <linux/i2c.h>
+#include <linux/serial_reg.h>
+#include <linux/ata_platform.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/pci.h>
+#include <mach/orion5x.h>
+#include "common.h"
+#include "mpp.h"
+#include "tsx09-common.h"
+
+#define QNAP_TS209_NOR_BOOT_BASE 0xf4000000
+#define QNAP_TS209_NOR_BOOT_SIZE SZ_8M
+
+/****************************************************************************
+ * 8MiB NOR flash. The struct mtd_partition is not in the same order as the
+ * partitions on the device because we want to keep compatibility with
+ * existing QNAP firmware.
+ *
+ * Layout as used by QNAP:
+ * [2] 0x00000000-0x00200000 : "Kernel"
+ * [3] 0x00200000-0x00600000 : "RootFS1"
+ * [4] 0x00600000-0x00700000 : "RootFS2"
+ * [6] 0x00700000-0x00760000 : "NAS Config" (read-only)
+ * [5] 0x00760000-0x00780000 : "U-Boot Config"
+ * [1] 0x00780000-0x00800000 : "U-Boot" (read-only)
+ ***************************************************************************/
+static struct mtd_partition qnap_ts209_partitions[] = {
+ {
+ .name = "U-Boot",
+ .size = 0x00080000,
+ .offset = 0x00780000,
+ .mask_flags = MTD_WRITEABLE,
+ }, {
+ .name = "Kernel",
+ .size = 0x00200000,
+ .offset = 0,
+ }, {
+ .name = "RootFS1",
+ .size = 0x00400000,
+ .offset = 0x00200000,
+ }, {
+ .name = "RootFS2",
+ .size = 0x00100000,
+ .offset = 0x00600000,
+ }, {
+ .name = "U-Boot Config",
+ .size = 0x00020000,
+ .offset = 0x00760000,
+ }, {
+ .name = "NAS Config",
+ .size = 0x00060000,
+ .offset = 0x00700000,
+ .mask_flags = MTD_WRITEABLE,
+ },
+};
+
+static struct physmap_flash_data qnap_ts209_nor_flash_data = {
+ .width = 1,
+ .parts = qnap_ts209_partitions,
+ .nr_parts = ARRAY_SIZE(qnap_ts209_partitions)
+};
+
+static struct resource qnap_ts209_nor_flash_resource = {
+ .flags = IORESOURCE_MEM,
+ .start = QNAP_TS209_NOR_BOOT_BASE,
+ .end = QNAP_TS209_NOR_BOOT_BASE + QNAP_TS209_NOR_BOOT_SIZE - 1,
+};
+
+static struct platform_device qnap_ts209_nor_flash = {
+ .name = "physmap-flash",
+ .id = 0,
+ .dev = {
+ .platform_data = &qnap_ts209_nor_flash_data,
+ },
+ .resource = &qnap_ts209_nor_flash_resource,
+ .num_resources = 1,
+};
+
+/*****************************************************************************
+ * PCI
+ ****************************************************************************/
+
+#define QNAP_TS209_PCI_SLOT0_OFFS 7
+#define QNAP_TS209_PCI_SLOT0_IRQ_PIN 6
+#define QNAP_TS209_PCI_SLOT1_IRQ_PIN 7
+
+static void __init qnap_ts209_pci_preinit(void)
+{
+ int pin;
+
+ /*
+ * Configure PCI GPIO IRQ pins
+ */
+ pin = QNAP_TS209_PCI_SLOT0_IRQ_PIN;
+ if (gpio_request(pin, "PCI Int1") == 0) {
+ if (gpio_direction_input(pin) == 0) {
+ irq_set_irq_type(gpio_to_irq(pin), IRQ_TYPE_LEVEL_LOW);
+ } else {
+ printk(KERN_ERR "qnap_ts209_pci_preinit failed to "
+ "set_irq_type pin %d\n", pin);
+ gpio_free(pin);
+ }
+ } else {
+ printk(KERN_ERR "qnap_ts209_pci_preinit failed to gpio_request "
+ "%d\n", pin);
+ }
+
+ pin = QNAP_TS209_PCI_SLOT1_IRQ_PIN;
+ if (gpio_request(pin, "PCI Int2") == 0) {
+ if (gpio_direction_input(pin) == 0) {
+ irq_set_irq_type(gpio_to_irq(pin), IRQ_TYPE_LEVEL_LOW);
+ } else {
+ printk(KERN_ERR "qnap_ts209_pci_preinit failed "
+ "to set_irq_type pin %d\n", pin);
+ gpio_free(pin);
+ }
+ } else {
+ printk(KERN_ERR "qnap_ts209_pci_preinit failed to gpio_request "
+ "%d\n", pin);
+ }
+}
+
+static int __init qnap_ts209_pci_map_irq(const struct pci_dev *dev, u8 slot,
+ u8 pin)
+{
+ int irq;
+
+ /*
+ * Check for devices with hard-wired IRQs.
+ */
+ irq = orion5x_pci_map_irq(dev, slot, pin);
+ if (irq != -1)
+ return irq;
+
+ /*
+ * PCI IRQs are connected via GPIOs.
+ */
+ switch (slot - QNAP_TS209_PCI_SLOT0_OFFS) {
+ case 0:
+ return gpio_to_irq(QNAP_TS209_PCI_SLOT0_IRQ_PIN);
+ case 1:
+ return gpio_to_irq(QNAP_TS209_PCI_SLOT1_IRQ_PIN);
+ default:
+ return -1;
+ }
+}
+
+static struct hw_pci qnap_ts209_pci __initdata = {
+ .nr_controllers = 2,
+ .preinit = qnap_ts209_pci_preinit,
+ .setup = orion5x_pci_sys_setup,
+ .scan = orion5x_pci_sys_scan_bus,
+ .map_irq = qnap_ts209_pci_map_irq,
+};
+
+static int __init qnap_ts209_pci_init(void)
+{
+ if (machine_is_ts209())
+ pci_common_init(&qnap_ts209_pci);
+
+ return 0;
+}
+
+subsys_initcall(qnap_ts209_pci_init);
+
+/*****************************************************************************
+ * RTC S35390A on I2C bus
+ ****************************************************************************/
+
+#define TS209_RTC_GPIO 3
+
+static struct i2c_board_info __initdata qnap_ts209_i2c_rtc = {
+ I2C_BOARD_INFO("s35390a", 0x30),
+ .irq = 0,
+};
+
+/****************************************************************************
+ * GPIO Attached Keys
+ * Power button is attached to the PIC microcontroller
+ ****************************************************************************/
+
+#define QNAP_TS209_GPIO_KEY_MEDIA 1
+#define QNAP_TS209_GPIO_KEY_RESET 2
+
+static struct gpio_keys_button qnap_ts209_buttons[] = {
+ {
+ .code = KEY_COPY,
+ .gpio = QNAP_TS209_GPIO_KEY_MEDIA,
+ .desc = "USB Copy Button",
+ .active_low = 1,
+ }, {
+ .code = KEY_RESTART,
+ .gpio = QNAP_TS209_GPIO_KEY_RESET,
+ .desc = "Reset Button",
+ .active_low = 1,
+ },
+};
+
+static struct gpio_keys_platform_data qnap_ts209_button_data = {
+ .buttons = qnap_ts209_buttons,
+ .nbuttons = ARRAY_SIZE(qnap_ts209_buttons),
+};
+
+static struct platform_device qnap_ts209_button_device = {
+ .name = "gpio-keys",
+ .id = -1,
+ .num_resources = 0,
+ .dev = {
+ .platform_data = &qnap_ts209_button_data,
+ },
+};
+
+/*****************************************************************************
+ * SATA
+ ****************************************************************************/
+static struct mv_sata_platform_data qnap_ts209_sata_data = {
+ .n_ports = 2,
+};
+
+/*****************************************************************************
+
+ * General Setup
+ ****************************************************************************/
+static unsigned int ts209_mpp_modes[] __initdata = {
+ MPP0_UNUSED,
+ MPP1_GPIO, /* USB copy button */
+ MPP2_GPIO, /* Load defaults button */
+ MPP3_GPIO, /* GPIO RTC */
+ MPP4_UNUSED,
+ MPP5_UNUSED,
+ MPP6_GPIO, /* PCI Int A */
+ MPP7_GPIO, /* PCI Int B */
+ MPP8_UNUSED,
+ MPP9_UNUSED,
+ MPP10_UNUSED,
+ MPP11_UNUSED,
+ MPP12_SATA_LED, /* SATA 0 presence */
+ MPP13_SATA_LED, /* SATA 1 presence */
+ MPP14_SATA_LED, /* SATA 0 active */
+ MPP15_SATA_LED, /* SATA 1 active */
+ MPP16_UART, /* UART1 RXD */
+ MPP17_UART, /* UART1 TXD */
+ MPP18_GPIO, /* SW_RST */
+ MPP19_UNUSED,
+ 0,
+};
+
+static void __init qnap_ts209_init(void)
+{
+ /*
+ * Setup basic Orion functions. Need to be called early.
+ */
+ orion5x_init();
+
+ orion5x_mpp_conf(ts209_mpp_modes);
+
+ /*
+ * MPP[20] PCI clock 0
+ * MPP[21] PCI clock 1
+ * MPP[22] USB 0 over current
+ * MPP[23-25] Reserved
+ */
+
+ /*
+ * Configure peripherals.
+ */
+ mvebu_mbus_add_window_by_id(ORION_MBUS_DEVBUS_BOOT_TARGET,
+ ORION_MBUS_DEVBUS_BOOT_ATTR,
+ QNAP_TS209_NOR_BOOT_BASE,
+ QNAP_TS209_NOR_BOOT_SIZE);
+ platform_device_register(&qnap_ts209_nor_flash);
+
+ orion5x_ehci0_init();
+ orion5x_ehci1_init();
+ qnap_tsx09_find_mac_addr(QNAP_TS209_NOR_BOOT_BASE +
+ qnap_ts209_partitions[5].offset,
+ qnap_ts209_partitions[5].size);
+ orion5x_eth_init(&qnap_tsx09_eth_data);
+ orion5x_i2c_init();
+ orion5x_sata_init(&qnap_ts209_sata_data);
+ orion5x_uart0_init();
+ orion5x_uart1_init();
+ orion5x_xor_init();
+
+ platform_device_register(&qnap_ts209_button_device);
+
+ /* Get RTC IRQ and register the chip */
+ if (gpio_request(TS209_RTC_GPIO, "rtc") == 0) {
+ if (gpio_direction_input(TS209_RTC_GPIO) == 0)
+ qnap_ts209_i2c_rtc.irq = gpio_to_irq(TS209_RTC_GPIO);
+ else
+ gpio_free(TS209_RTC_GPIO);
+ }
+ if (qnap_ts209_i2c_rtc.irq == 0)
+ pr_warn("qnap_ts209_init: failed to get RTC IRQ\n");
+ i2c_register_board_info(0, &qnap_ts209_i2c_rtc, 1);
+
+ /* register tsx09 specific power-off method */
+ pm_power_off = qnap_tsx09_power_off;
+}
+
+MACHINE_START(TS209, "QNAP TS-109/TS-209")
+ /* Maintainer: Byron Bradley <byron.bbradley@gmail.com> */
+ .atag_offset = 0x100,
+ .init_machine = qnap_ts209_init,
+ .map_io = orion5x_map_io,
+ .init_early = orion5x_init_early,
+ .init_irq = orion5x_init_irq,
+ .init_time = orion5x_timer_init,
+ .fixup = tag_fixup_mem32,
+ .restart = orion5x_restart,
+MACHINE_END