diff options
Diffstat (limited to 'arch/arm/mach-pxa/include/mach/gumstix.h')
| -rw-r--r-- | arch/arm/mach-pxa/include/mach/gumstix.h | 92 |
1 files changed, 0 insertions, 92 deletions
diff --git a/arch/arm/mach-pxa/include/mach/gumstix.h b/arch/arm/mach-pxa/include/mach/gumstix.h deleted file mode 100644 index f7df27bbb..000000000 --- a/arch/arm/mach-pxa/include/mach/gumstix.h +++ /dev/null @@ -1,92 +0,0 @@ -/* - * arch/arm/mach-pxa/include/mach/gumstix.h - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#include "irqs.h" /* PXA_GPIO_TO_IRQ */ - -/* BTRESET - Reset line to Bluetooth module, active low signal. */ -#define GPIO_GUMSTIX_BTRESET 7 -#define GPIO_GUMSTIX_BTRESET_MD (GPIO_GUMSTIX_BTRESET | GPIO_OUT) - - -/* -GPIOn - Input from MAX823 (or equiv), normalizing USB +5V into a clean -interrupt signal for determining cable presence. On the gumstix F, -this moves to GPIO17 and GPIO37. */ - -/* GPIOx - Connects to USB D+ and used as a pull-up after GPIOn -has detected a cable insertion; driven low otherwise. */ - -#define GPIO_GUMSTIX_USB_GPIOn 35 -#define GPIO_GUMSTIX_USB_GPIOx 41 - -/* usb state change */ -#define GUMSTIX_USB_INTR_IRQ PXA_GPIO_TO_IRQ(GPIO_GUMSTIX_USB_GPIOn) - -#define GPIO_GUMSTIX_USB_GPIOn_MD (GPIO_GUMSTIX_USB_GPIOn | GPIO_IN) -#define GPIO_GUMSTIX_USB_GPIOx_CON_MD (GPIO_GUMSTIX_USB_GPIOx | GPIO_OUT) -#define GPIO_GUMSTIX_USB_GPIOx_DIS_MD (GPIO_GUMSTIX_USB_GPIOx | GPIO_IN) - -/* - * SD/MMC definitions - */ -#define GUMSTIX_GPIO_nSD_WP 22 /* SD Write Protect */ -#define GUMSTIX_GPIO_nSD_DETECT 11 /* MMC/SD Card Detect */ -#define GUMSTIX_IRQ_GPIO_nSD_DETECT PXA_GPIO_TO_IRQ(GUMSTIX_GPIO_nSD_DETECT) - -/* - * SMC Ethernet definitions - * ETH_RST provides a hardware reset line to the ethernet chip - * ETH is the IRQ line in from the ethernet chip to the PXA - */ -#define GPIO_GUMSTIX_ETH0_RST 80 -#define GPIO_GUMSTIX_ETH0_RST_MD (GPIO_GUMSTIX_ETH0_RST | GPIO_OUT) -#define GPIO_GUMSTIX_ETH1_RST 52 -#define GPIO_GUMSTIX_ETH1_RST_MD (GPIO_GUMSTIX_ETH1_RST | GPIO_OUT) - -#define GPIO_GUMSTIX_ETH0 36 -#define GPIO_GUMSTIX_ETH0_MD (GPIO_GUMSTIX_ETH0 | GPIO_IN) -#define GUMSTIX_ETH0_IRQ PXA_GPIO_TO_IRQ(GPIO_GUMSTIX_ETH0) -#define GPIO_GUMSTIX_ETH1 27 -#define GPIO_GUMSTIX_ETH1_MD (GPIO_GUMSTIX_ETH1 | GPIO_IN) -#define GUMSTIX_ETH1_IRQ PXA_GPIO_TO_IRQ(GPIO_GUMSTIX_ETH1) - - -/* CF reset line */ -#define GPIO8_RESET 8 - -/* CF slot 0 */ -#define GPIO4_nBVD1 4 -#define GPIO4_nSTSCHG GPIO4_nBVD1 -#define GPIO11_nCD 11 -#define GPIO26_PRDY_nBSY 26 -#define GUMSTIX_S0_nSTSCHG_IRQ PXA_GPIO_TO_IRQ(GPIO4_nSTSCHG) -#define GUMSTIX_S0_nCD_IRQ PXA_GPIO_TO_IRQ(GPIO11_nCD) -#define GUMSTIX_S0_PRDY_nBSY_IRQ PXA_GPIO_TO_IRQ(GPIO26_PRDY_nBSY) - -/* CF slot 1 */ -#define GPIO18_nBVD1 18 -#define GPIO18_nSTSCHG GPIO18_nBVD1 -#define GPIO36_nCD 36 -#define GPIO27_PRDY_nBSY 27 -#define GUMSTIX_S1_nSTSCHG_IRQ PXA_GPIO_TO_IRQ(GPIO18_nSTSCHG) -#define GUMSTIX_S1_nCD_IRQ PXA_GPIO_TO_IRQ(GPIO36_nCD) -#define GUMSTIX_S1_PRDY_nBSY_IRQ PXA_GPIO_TO_IRQ(GPIO27_PRDY_nBSY) - -/* CF GPIO line modes */ -#define GPIO4_nSTSCHG_MD (GPIO4_nSTSCHG | GPIO_IN) -#define GPIO8_RESET_MD (GPIO8_RESET | GPIO_OUT) -#define GPIO11_nCD_MD (GPIO11_nCD | GPIO_IN) -#define GPIO18_nSTSCHG_MD (GPIO18_nSTSCHG | GPIO_IN) -#define GPIO26_PRDY_nBSY_MD (GPIO26_PRDY_nBSY | GPIO_IN) -#define GPIO27_PRDY_nBSY_MD (GPIO27_PRDY_nBSY | GPIO_IN) -#define GPIO36_nCD_MD (GPIO36_nCD | GPIO_IN) - -/* for expansion boards that can't be programatically detected */ -extern int am200_init(void); -extern int am300_init(void); - |