summaryrefslogtreecommitdiff
path: root/arch/arm/mach-pxa/standby.S
diff options
context:
space:
mode:
Diffstat (limited to 'arch/arm/mach-pxa/standby.S')
-rw-r--r--arch/arm/mach-pxa/standby.S114
1 files changed, 114 insertions, 0 deletions
diff --git a/arch/arm/mach-pxa/standby.S b/arch/arm/mach-pxa/standby.S
new file mode 100644
index 000000000..eab1645bb
--- /dev/null
+++ b/arch/arm/mach-pxa/standby.S
@@ -0,0 +1,114 @@
+/*
+ * PXA27x standby mode
+ *
+ * Author: David Burrage
+ *
+ * 2005 (c) MontaVista Software, Inc. This file is licensed under
+ * the terms of the GNU General Public License version 2. This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ */
+
+#include <linux/linkage.h>
+#include <asm/assembler.h>
+#include <mach/hardware.h>
+
+#include <mach/pxa2xx-regs.h>
+
+ .text
+
+#ifdef CONFIG_PXA27x
+ENTRY(pxa_cpu_standby)
+ ldr r0, =PSSR
+ mov r1, #(PSSR_PH | PSSR_STS)
+ mov r2, #PWRMODE_STANDBY
+ mov r3, #UNCACHED_PHYS_0 @ Read mem context in.
+ ldr ip, [r3]
+ b 1f
+
+ .align 5
+1: mcr p14, 0, r2, c7, c0, 0 @ put the system into Standby
+ str r1, [r0] @ make sure PSSR_PH/STS are clear
+ ret lr
+
+#endif
+
+#ifdef CONFIG_PXA3xx
+
+#define PXA3_MDCNFG 0x0000
+#define PXA3_MDCNFG_DMCEN (1 << 30)
+#define PXA3_DDR_HCAL 0x0060
+#define PXA3_DDR_HCAL_HCRNG 0x1f
+#define PXA3_DDR_HCAL_HCPROG (1 << 28)
+#define PXA3_DDR_HCAL_HCEN (1 << 31)
+#define PXA3_DMCIER 0x0070
+#define PXA3_DMCIER_EDLP (1 << 29)
+#define PXA3_DMCISR 0x0078
+#define PXA3_RCOMP 0x0100
+#define PXA3_RCOMP_SWEVAL (1 << 31)
+
+ENTRY(pm_enter_standby_start)
+ mov r1, #0xf6000000 @ DMEMC_REG_BASE (PXA3_MDCNFG)
+ add r1, r1, #0x00100000
+
+ /*
+ * Preload the TLB entry for accessing the dynamic memory
+ * controller registers. Note that page table lookups will
+ * fail until the dynamic memory controller has been
+ * reinitialised - and that includes MMU page table walks.
+ * This also means that only the dynamic memory controller
+ * can be reliably accessed in the code following standby.
+ */
+ ldr r2, [r1] @ Dummy read PXA3_MDCNFG
+
+ mcr p14, 0, r0, c7, c0, 0
+ .rept 8
+ nop
+ .endr
+
+ ldr r0, [r1, #PXA3_DDR_HCAL] @ Clear (and wait for) HCEN
+ bic r0, r0, #PXA3_DDR_HCAL_HCEN
+ str r0, [r1, #PXA3_DDR_HCAL]
+1: ldr r0, [r1, #PXA3_DDR_HCAL]
+ tst r0, #PXA3_DDR_HCAL_HCEN
+ bne 1b
+
+ ldr r0, [r1, #PXA3_RCOMP] @ Initiate RCOMP
+ orr r0, r0, #PXA3_RCOMP_SWEVAL
+ str r0, [r1, #PXA3_RCOMP]
+
+ mov r0, #~0 @ Clear interrupts
+ str r0, [r1, #PXA3_DMCISR]
+
+ ldr r0, [r1, #PXA3_DMCIER] @ set DMIER[EDLP]
+ orr r0, r0, #PXA3_DMCIER_EDLP
+ str r0, [r1, #PXA3_DMCIER]
+
+ ldr r0, [r1, #PXA3_DDR_HCAL] @ clear HCRNG, set HCPROG, HCEN
+ bic r0, r0, #PXA3_DDR_HCAL_HCRNG
+ orr r0, r0, #PXA3_DDR_HCAL_HCEN | PXA3_DDR_HCAL_HCPROG
+ str r0, [r1, #PXA3_DDR_HCAL]
+
+1: ldr r0, [r1, #PXA3_DMCISR]
+ tst r0, #PXA3_DMCIER_EDLP
+ beq 1b
+
+ ldr r0, [r1, #PXA3_MDCNFG] @ set PXA3_MDCNFG[DMCEN]
+ orr r0, r0, #PXA3_MDCNFG_DMCEN
+ str r0, [r1, #PXA3_MDCNFG]
+1: ldr r0, [r1, #PXA3_MDCNFG]
+ tst r0, #PXA3_MDCNFG_DMCEN
+ beq 1b
+
+ ldr r0, [r1, #PXA3_DDR_HCAL] @ set PXA3_DDR_HCAL[HCRNG]
+ orr r0, r0, #2 @ HCRNG
+ str r0, [r1, #PXA3_DDR_HCAL]
+
+ ldr r0, [r1, #PXA3_DMCIER] @ Clear the interrupt
+ bic r0, r0, #0x20000000
+ str r0, [r1, #PXA3_DMCIER]
+
+ ret lr
+ENTRY(pm_enter_standby_end)
+
+#endif