1 files changed, 284 insertions, 0 deletions
diff --git a/arch/arm/mach-s3c24xx/iotiming-s3c2412.c b/arch/arm/mach-s3c24xx/iotiming-s3c2412.c
new file mode 100644
index 000000000..28b13951d
--- /dev/null
+++ b/arch/arm/mach-s3c24xx/iotiming-s3c2412.c
@@ -0,0 +1,284 @@
+/*
+ * Copyright (c) 2006-2008 Simtec Electronics
+ *	http://armlinux.simtec.co.uk/
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C2412/S3C2443 (PL093 based) IO timing support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <linux/ioport.h>
+#include <linux/cpufreq.h>
+#include <linux/seq_file.h>
+#include <linux/device.h>
+#include <linux/delay.h>
+#include <linux/clk.h>
+#include <linux/err.h>
+#include <linux/slab.h>
+
+#include <linux/amba/pl093.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+
+#include <plat/cpu.h>
+#include <plat/cpu-freq-core.h>
+
+#include <mach/s3c2412.h>
+
+#define print_ns(x) ((x) / 10), ((x) % 10)
+
+/**
+ * s3c2412_print_timing - print timing infromation via printk.
+ * @pfx: The prefix to print each line with.
+ * @iot: The IO timing information
+ */
+static void s3c2412_print_timing(const char *pfx, struct s3c_iotimings *iot)
+{
+	struct s3c2412_iobank_timing *bt;
+	unsigned int bank;
+
+	for (bank = 0; bank < MAX_BANKS; bank++) {
+		bt = iot->bank[bank].io_2412;
+		if (!bt)
+			continue;
+
+		printk(KERN_DEBUG "%s: %d: idcy=%d.%d wstrd=%d.%d wstwr=%d,%d"
+		       "wstoen=%d.%d wstwen=%d.%d wstbrd=%d.%d\n", pfx, bank,
+		       print_ns(bt->idcy),
+		       print_ns(bt->wstrd),
+		       print_ns(bt->wstwr),
+		       print_ns(bt->wstoen),
+		       print_ns(bt->wstwen),
+		       print_ns(bt->wstbrd));
+	}
+}
+
+/**
+ * to_div - turn a cycle length into a divisor setting.
+ * @cyc_tns: The cycle time in 10ths of nanoseconds.
+ * @clk_tns: The clock period in 10ths of nanoseconds.
+ */
+static inline unsigned int to_div(unsigned int cyc_tns, unsigned int clk_tns)
+{
+	return cyc_tns ? DIV_ROUND_UP(cyc_tns, clk_tns) : 0;
+}
+
+/**
+ * calc_timing - calculate timing divisor value and check in range.
+ * @hwtm: The hardware timing in 10ths of nanoseconds.
+ * @clk_tns: The clock period in 10ths of nanoseconds.
+ * @err: Pointer to err variable to update in event of failure.
+ */
+static unsigned int calc_timing(unsigned int hwtm, unsigned int clk_tns,
+				unsigned int *err)
+{
+	unsigned int ret = to_div(hwtm, clk_tns);
+
+	if (ret > 0xf)
+		*err = -EINVAL;
+
+	return ret;
+}
+
+/**
+ * s3c2412_calc_bank - calculate the bank divisor settings.
+ * @cfg: The current frequency configuration.
+ * @bt: The bank timing.
+ */
+static int s3c2412_calc_bank(struct s3c_cpufreq_config *cfg,
+			     struct s3c2412_iobank_timing *bt)
+{
+	unsigned int hclk = cfg->freq.hclk_tns;
+	int err = 0;
+
+	bt->smbidcyr = calc_timing(bt->idcy, hclk, &err);
+	bt->smbwstrd = calc_timing(bt->wstrd, hclk, &err);
+	bt->smbwstwr = calc_timing(bt->wstwr, hclk, &err);
+	bt->smbwstoen = calc_timing(bt->wstoen, hclk, &err);
+	bt->smbwstwen = calc_timing(bt->wstwen, hclk, &err);
+	bt->smbwstbrd = calc_timing(bt->wstbrd, hclk, &err);
+
+	return err;
+}
+
+/**
+ * s3c2412_iotiming_debugfs - debugfs show io bank timing information
+ * @seq: The seq_file to write output to using seq_printf().
+ * @cfg: The current configuration.
+ * @iob: The IO bank information to decode.
+*/
+void s3c2412_iotiming_debugfs(struct seq_file *seq,
+			      struct s3c_cpufreq_config *cfg,
+			      union s3c_iobank *iob)
+{
+	struct s3c2412_iobank_timing *bt = iob->io_2412;
+
+	seq_printf(seq,
+		   "\tRead: idcy=%d.%d wstrd=%d.%d wstwr=%d,%d"
+		   "wstoen=%d.%d wstwen=%d.%d wstbrd=%d.%d\n",
+		   print_ns(bt->idcy),
+		   print_ns(bt->wstrd),
+		   print_ns(bt->wstwr),
+		   print_ns(bt->wstoen),
+		   print_ns(bt->wstwen),
+		   print_ns(bt->wstbrd));
+}
+
+/**
+ * s3c2412_iotiming_calc - calculate all the bank divisor settings.
+ * @cfg: The current frequency configuration.
+ * @iot: The bank timing information.
+ *
+ * Calculate the timing information for all the banks that are
+ * configured as IO, using s3c2412_calc_bank().
+ */
+int s3c2412_iotiming_calc(struct s3c_cpufreq_config *cfg,
+			  struct s3c_iotimings *iot)
+{
+	struct s3c2412_iobank_timing *bt;
+	int bank;
+	int ret;
+
+	for (bank = 0; bank < MAX_BANKS; bank++) {
+		bt = iot->bank[bank].io_2412;
+		if (!bt)
+			continue;
+
+		ret = s3c2412_calc_bank(cfg, bt);
+		if (ret) {
+			printk(KERN_ERR "%s: cannot calculate bank %d io\n",
+			       __func__, bank);
+			goto err;
+		}
+	}
+
+	return 0;
+ err:
+	return ret;
+}
+
+/**
+ * s3c2412_iotiming_set - set the timing information
+ * @cfg: The current frequency configuration.
+ * @iot: The bank timing information.
+ *
+ * Set the IO bank information from the details calculated earlier from
+ * calling s3c2412_iotiming_calc().
+ */
+void s3c2412_iotiming_set(struct s3c_cpufreq_config *cfg,
+			  struct s3c_iotimings *iot)
+{
+	struct s3c2412_iobank_timing *bt;
+	void __iomem *regs;
+	int bank;
+
+	/* set the io timings from the specifier */
+
+	for (bank = 0; bank < MAX_BANKS; bank++) {
+		bt = iot->bank[bank].io_2412;
+		if (!bt)
+			continue;
+
+		regs = S3C2412_SSMC_BANK(bank);
+
+		__raw_writel(bt->smbidcyr, regs + SMBIDCYR);
+		__raw_writel(bt->smbwstrd, regs + SMBWSTRDR);
+		__raw_writel(bt->smbwstwr, regs + SMBWSTWRR);
+		__raw_writel(bt->smbwstoen, regs + SMBWSTOENR);
+		__raw_writel(bt->smbwstwen, regs + SMBWSTWENR);
+		__raw_writel(bt->smbwstbrd, regs + SMBWSTBRDR);
+	}
+}
+
+static inline unsigned int s3c2412_decode_timing(unsigned int clock, u32 reg)
+{
+	return (reg & 0xf) * clock;
+}
+
+static void s3c2412_iotiming_getbank(struct s3c_cpufreq_config *cfg,
+				     struct s3c2412_iobank_timing *bt,
+				     unsigned int bank)
+{
+	unsigned long clk = cfg->freq.hclk_tns;  /* ssmc clock??? */
+	void __iomem *regs = S3C2412_SSMC_BANK(bank);
+
+	bt->idcy = s3c2412_decode_timing(clk, __raw_readl(regs + SMBIDCYR));
+	bt->wstrd = s3c2412_decode_timing(clk, __raw_readl(regs + SMBWSTRDR));
+	bt->wstoen = s3c2412_decode_timing(clk, __raw_readl(regs + SMBWSTOENR));
+	bt->wstwen = s3c2412_decode_timing(clk, __raw_readl(regs + SMBWSTWENR));
+	bt->wstbrd = s3c2412_decode_timing(clk, __raw_readl(regs + SMBWSTBRDR));
+}
+
+/**
+ * bank_is_io - return true if bank is (possibly) IO.
+ * @bank: The bank number.
+ * @bankcfg: The value of S3C2412_EBI_BANKCFG.
+ */
+static inline bool bank_is_io(unsigned int bank, u32 bankcfg)
+{
+	if (bank < 2)
+		return true;
+
+	return !(bankcfg & (1 << bank));
+}
+
+int s3c2412_iotiming_get(struct s3c_cpufreq_config *cfg,
+			 struct s3c_iotimings *timings)
+{
+	struct s3c2412_iobank_timing *bt;
+	u32 bankcfg = __raw_readl(S3C2412_EBI_BANKCFG);
+	unsigned int bank;
+
+	/* look through all banks to see what is currently set. */
+
+	for (bank = 0; bank < MAX_BANKS; bank++) {
+		if (!bank_is_io(bank, bankcfg))
+			continue;
+
+		bt = kzalloc(sizeof(struct s3c2412_iobank_timing), GFP_KERNEL);
+		if (!bt) {
+			printk(KERN_ERR "%s: no memory for bank\n", __func__);
+			return -ENOMEM;
+		}
+
+		timings->bank[bank].io_2412 = bt;
+		s3c2412_iotiming_getbank(cfg, bt, bank);
+	}
+
+	s3c2412_print_timing("get", timings);
+	return 0;
+}
+
+/* this is in here as it is so small, it doesn't currently warrant a file
+ * to itself. We expect that any s3c24xx needing this is going to also
+ * need the iotiming support.
+ */
+void s3c2412_cpufreq_setrefresh(struct s3c_cpufreq_config *cfg)
+{
+	struct s3c_cpufreq_board *board = cfg->board;
+	u32 refresh;
+
+	WARN_ON(board == NULL);
+
+	/* Reduce both the refresh time (in ns) and the frequency (in MHz)
+	 * down to ensure that we do not overflow 32 bit numbers.
+	 *
+	 * This should work for HCLK up to 133MHz and refresh period up
+	 * to 30usec.
+	 */
+
+	refresh = (cfg->freq.hclk / 100) * (board->refresh / 10);
+	refresh = DIV_ROUND_UP(refresh, (1000 * 1000)); /* apply scale  */
+	refresh &= ((1 << 16) - 1);
+
+	s3c_freq_dbg("%s: refresh value %u\n", __func__, (unsigned int)refresh);
+
+	__raw_writel(refresh, S3C2412_REFRESH);
+}