summaryrefslogtreecommitdiff
path: root/arch/arm/mach-shmobile/board-armadillo800eva.c
diff options
context:
space:
mode:
Diffstat (limited to 'arch/arm/mach-shmobile/board-armadillo800eva.c')
-rw-r--r--arch/arm/mach-shmobile/board-armadillo800eva.c1365
1 files changed, 1365 insertions, 0 deletions
diff --git a/arch/arm/mach-shmobile/board-armadillo800eva.c b/arch/arm/mach-shmobile/board-armadillo800eva.c
new file mode 100644
index 000000000..bf37e3c53
--- /dev/null
+++ b/arch/arm/mach-shmobile/board-armadillo800eva.c
@@ -0,0 +1,1365 @@
+/*
+ * armadillo 800 eva board support
+ *
+ * Copyright (C) 2012 Renesas Solutions Corp.
+ * Copyright (C) 2012 Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/gpio.h>
+#include <linux/gpio_keys.h>
+#include <linux/i2c-gpio.h>
+#include <linux/input.h>
+#include <linux/irq.h>
+#include <linux/kernel.h>
+#include <linux/mfd/tmio.h>
+#include <linux/mmc/host.h>
+#include <linux/mmc/sh_mmcif.h>
+#include <linux/mmc/sh_mobile_sdhi.h>
+#include <linux/pinctrl/machine.h>
+#include <linux/platform_data/st1232_pdata.h>
+#include <linux/platform_device.h>
+#include <linux/pwm.h>
+#include <linux/pwm_backlight.h>
+#include <linux/reboot.h>
+#include <linux/regulator/driver.h>
+#include <linux/regulator/fixed.h>
+#include <linux/regulator/gpio-regulator.h>
+#include <linux/regulator/machine.h>
+#include <linux/sh_eth.h>
+#include <linux/usb/renesas_usbhs.h>
+#include <linux/videodev2.h>
+
+#include <asm/hardware/cache-l2x0.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/time.h>
+#include <asm/page.h>
+#include <media/mt9t112.h>
+#include <media/sh_mobile_ceu.h>
+#include <media/soc_camera.h>
+#include <sound/sh_fsi.h>
+#include <sound/simple_card.h>
+#include <video/sh_mobile_hdmi.h>
+#include <video/sh_mobile_lcdc.h>
+
+#include "common.h"
+#include "irqs.h"
+#include "pm-rmobile.h"
+#include "r8a7740.h"
+#include "sh-gpio.h"
+
+/*
+ * CON1 Camera Module
+ * CON2 Extension Bus
+ * CON3 HDMI Output
+ * CON4 Composite Video Output
+ * CON5 H-UDI JTAG
+ * CON6 ARM JTAG
+ * CON7 SD1
+ * CON8 SD2
+ * CON9 RTC BackUp
+ * CON10 Monaural Mic Input
+ * CON11 Stereo Headphone Output
+ * CON12 Audio Line Output(L)
+ * CON13 Audio Line Output(R)
+ * CON14 AWL13 Module
+ * CON15 Extension
+ * CON16 LCD1
+ * CON17 LCD2
+ * CON19 Power Input
+ * CON20 USB1
+ * CON21 USB2
+ * CON22 Serial
+ * CON23 LAN
+ * CON24 USB3
+ * LED1 Camera LED(Yellow)
+ * LED2 Power LED (Green)
+ * ED3-LED6 User LED(Yellow)
+ * LED7 LAN link LED(Green)
+ * LED8 LAN activity LED(Yellow)
+ */
+
+/*
+ * DipSwitch
+ *
+ * SW1
+ *
+ * -12345678-+---------------+----------------------------
+ * 1 | boot | hermit
+ * 0 | boot | OS auto boot
+ * -12345678-+---------------+----------------------------
+ * 00 | boot device | eMMC
+ * 10 | boot device | SDHI0 (CON7)
+ * 01 | boot device | -
+ * 11 | boot device | Extension Buss (CS0)
+ * -12345678-+---------------+----------------------------
+ * 0 | Extension Bus | D8-D15 disable, eMMC enable
+ * 1 | Extension Bus | D8-D15 enable, eMMC disable
+ * -12345678-+---------------+----------------------------
+ * 0 | SDHI1 | COM8 disable, COM14 enable
+ * 1 | SDHI1 | COM8 enable, COM14 disable
+ * -12345678-+---------------+----------------------------
+ * 0 | USB0 | COM20 enable, COM24 disable
+ * 1 | USB0 | COM20 disable, COM24 enable
+ * -12345678-+---------------+----------------------------
+ * 00 | JTAG | SH-X2
+ * 10 | JTAG | ARM
+ * 01 | JTAG | -
+ * 11 | JTAG | Boundary Scan
+ *-----------+---------------+----------------------------
+ */
+
+/*
+ * FSI-WM8978
+ *
+ * this command is required when playback.
+ *
+ * # amixer set "Headphone" 50
+ *
+ * this command is required when capture.
+ *
+ * # amixer set "Input PGA" 15
+ * # amixer set "Left Input Mixer MicP" on
+ * # amixer set "Left Input Mixer MicN" on
+ * # amixer set "Right Input Mixer MicN" on
+ * # amixer set "Right Input Mixer MicP" on
+ */
+
+/*
+ * USB function
+ *
+ * When you use USB Function,
+ * set SW1.6 ON, and connect cable to CN24.
+ *
+ * USBF needs workaround on R8A7740 chip.
+ * These are a little bit complex.
+ * see
+ * usbhsf_power_ctrl()
+ */
+#define IRQ7 irq_pin(7)
+#define USBCR1 IOMEM(0xe605810a)
+#define USBH 0xC6700000
+#define USBH_USBCTR 0x10834
+
+struct usbhsf_private {
+ struct clk *phy;
+ struct clk *usb24;
+ struct clk *pci;
+ struct clk *func;
+ struct clk *host;
+ void __iomem *usbh_base;
+ struct renesas_usbhs_platform_info info;
+};
+
+#define usbhsf_get_priv(pdev) \
+ container_of(renesas_usbhs_get_info(pdev), \
+ struct usbhsf_private, info)
+
+static int usbhsf_get_id(struct platform_device *pdev)
+{
+ return USBHS_GADGET;
+}
+
+static int usbhsf_power_ctrl(struct platform_device *pdev,
+ void __iomem *base, int enable)
+{
+ struct usbhsf_private *priv = usbhsf_get_priv(pdev);
+
+ /*
+ * Work around for USB Function.
+ * It needs USB host clock, and settings
+ */
+ if (enable) {
+ /*
+ * enable all the related usb clocks
+ * for usb workaround
+ */
+ clk_enable(priv->usb24);
+ clk_enable(priv->pci);
+ clk_enable(priv->host);
+ clk_enable(priv->func);
+ clk_enable(priv->phy);
+
+ /*
+ * set USBCR1
+ *
+ * Port1 is driven by USB function,
+ * Port2 is driven by USB HOST
+ * One HOST (Port1 or Port2 is HOST)
+ * USB PLL input clock = 24MHz
+ */
+ __raw_writew(0xd750, USBCR1);
+ mdelay(1);
+
+ /*
+ * start USB Host
+ */
+ __raw_writel(0x0000000c, priv->usbh_base + USBH_USBCTR);
+ __raw_writel(0x00000008, priv->usbh_base + USBH_USBCTR);
+ mdelay(10);
+
+ /*
+ * USB PHY Power ON
+ */
+ __raw_writew(0xd770, USBCR1);
+ __raw_writew(0x4000, base + 0x102); /* USBF :: SUSPMODE */
+
+ } else {
+ __raw_writel(0x0000010f, priv->usbh_base + USBH_USBCTR);
+ __raw_writew(0xd7c0, USBCR1); /* GPIO */
+
+ clk_disable(priv->phy);
+ clk_disable(priv->func); /* usb work around */
+ clk_disable(priv->host); /* usb work around */
+ clk_disable(priv->pci); /* usb work around */
+ clk_disable(priv->usb24); /* usb work around */
+ }
+
+ return 0;
+}
+
+static int usbhsf_get_vbus(struct platform_device *pdev)
+{
+ return gpio_get_value(209);
+}
+
+static irqreturn_t usbhsf_interrupt(int irq, void *data)
+{
+ struct platform_device *pdev = data;
+
+ renesas_usbhs_call_notify_hotplug(pdev);
+
+ return IRQ_HANDLED;
+}
+
+static int usbhsf_hardware_exit(struct platform_device *pdev)
+{
+ struct usbhsf_private *priv = usbhsf_get_priv(pdev);
+
+ if (!IS_ERR(priv->phy))
+ clk_put(priv->phy);
+ if (!IS_ERR(priv->usb24))
+ clk_put(priv->usb24);
+ if (!IS_ERR(priv->pci))
+ clk_put(priv->pci);
+ if (!IS_ERR(priv->host))
+ clk_put(priv->host);
+ if (!IS_ERR(priv->func))
+ clk_put(priv->func);
+ if (priv->usbh_base)
+ iounmap(priv->usbh_base);
+
+ priv->phy = NULL;
+ priv->usb24 = NULL;
+ priv->pci = NULL;
+ priv->host = NULL;
+ priv->func = NULL;
+ priv->usbh_base = NULL;
+
+ free_irq(IRQ7, pdev);
+
+ return 0;
+}
+
+static int usbhsf_hardware_init(struct platform_device *pdev)
+{
+ struct usbhsf_private *priv = usbhsf_get_priv(pdev);
+ int ret;
+
+ priv->phy = clk_get(&pdev->dev, "phy");
+ priv->usb24 = clk_get(&pdev->dev, "usb24");
+ priv->pci = clk_get(&pdev->dev, "pci");
+ priv->func = clk_get(&pdev->dev, "func");
+ priv->host = clk_get(&pdev->dev, "host");
+ priv->usbh_base = ioremap_nocache(USBH, 0x20000);
+
+ if (IS_ERR(priv->phy) ||
+ IS_ERR(priv->usb24) ||
+ IS_ERR(priv->pci) ||
+ IS_ERR(priv->host) ||
+ IS_ERR(priv->func) ||
+ !priv->usbh_base) {
+ dev_err(&pdev->dev, "USB clock setting failed\n");
+ usbhsf_hardware_exit(pdev);
+ return -EIO;
+ }
+
+ ret = request_irq(IRQ7, usbhsf_interrupt, IRQF_TRIGGER_NONE,
+ dev_name(&pdev->dev), pdev);
+ if (ret) {
+ dev_err(&pdev->dev, "request_irq err\n");
+ return ret;
+ }
+ irq_set_irq_type(IRQ7, IRQ_TYPE_EDGE_BOTH);
+
+ /* usb24 use 1/1 of parent clock (= usb24s = 24MHz) */
+ clk_set_rate(priv->usb24,
+ clk_get_rate(clk_get_parent(priv->usb24)));
+
+ return 0;
+}
+
+static struct usbhsf_private usbhsf_private = {
+ .info = {
+ .platform_callback = {
+ .get_id = usbhsf_get_id,
+ .get_vbus = usbhsf_get_vbus,
+ .hardware_init = usbhsf_hardware_init,
+ .hardware_exit = usbhsf_hardware_exit,
+ .power_ctrl = usbhsf_power_ctrl,
+ },
+ .driver_param = {
+ .buswait_bwait = 5,
+ .detection_delay = 5,
+ .d0_rx_id = SHDMA_SLAVE_USBHS_RX,
+ .d1_tx_id = SHDMA_SLAVE_USBHS_TX,
+ },
+ }
+};
+
+static struct resource usbhsf_resources[] = {
+ {
+ .name = "USBHS",
+ .start = 0xe6890000,
+ .end = 0xe6890104 - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .start = gic_spi(51),
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device usbhsf_device = {
+ .name = "renesas_usbhs",
+ .dev = {
+ .platform_data = &usbhsf_private.info,
+ },
+ .id = -1,
+ .num_resources = ARRAY_SIZE(usbhsf_resources),
+ .resource = usbhsf_resources,
+};
+
+/* Ether */
+static struct sh_eth_plat_data sh_eth_platdata = {
+ .phy = 0x00, /* LAN8710A */
+ .edmac_endian = EDMAC_LITTLE_ENDIAN,
+ .phy_interface = PHY_INTERFACE_MODE_MII,
+};
+
+static struct resource sh_eth_resources[] = {
+ {
+ .start = 0xe9a00000,
+ .end = 0xe9a00800 - 1,
+ .flags = IORESOURCE_MEM,
+ }, {
+ .start = 0xe9a01800,
+ .end = 0xe9a02000 - 1,
+ .flags = IORESOURCE_MEM,
+ }, {
+ .start = gic_spi(110),
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device sh_eth_device = {
+ .name = "r8a7740-gether",
+ .id = -1,
+ .dev = {
+ .platform_data = &sh_eth_platdata,
+ .dma_mask = &sh_eth_device.dev.coherent_dma_mask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ },
+ .resource = sh_eth_resources,
+ .num_resources = ARRAY_SIZE(sh_eth_resources),
+};
+
+/* PWM */
+static struct resource pwm_resources[] = {
+ [0] = {
+ .start = 0xe6600000,
+ .end = 0xe66000ff,
+ .flags = IORESOURCE_MEM,
+ },
+};
+
+static struct platform_device pwm_device = {
+ .name = "renesas-tpu-pwm",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(pwm_resources),
+ .resource = pwm_resources,
+};
+
+static struct pwm_lookup pwm_lookup[] = {
+ PWM_LOOKUP("renesas-tpu-pwm", 2, "pwm-backlight.0", NULL,
+ 33333, PWM_POLARITY_INVERSED),
+};
+
+/* LCDC and backlight */
+static struct platform_pwm_backlight_data pwm_backlight_data = {
+ .lth_brightness = 50,
+ .max_brightness = 255,
+ .dft_brightness = 255,
+ .pwm_period_ns = 33333, /* 30kHz */
+ .enable_gpio = 61,
+};
+
+static struct platform_device pwm_backlight_device = {
+ .name = "pwm-backlight",
+ .dev = {
+ .platform_data = &pwm_backlight_data,
+ },
+};
+
+static struct fb_videomode lcdc0_mode = {
+ .name = "AMPIER/AM-800480",
+ .xres = 800,
+ .yres = 480,
+ .left_margin = 88,
+ .right_margin = 40,
+ .hsync_len = 128,
+ .upper_margin = 20,
+ .lower_margin = 5,
+ .vsync_len = 5,
+ .sync = 0,
+};
+
+static struct sh_mobile_lcdc_info lcdc0_info = {
+ .clock_source = LCDC_CLK_BUS,
+ .ch[0] = {
+ .chan = LCDC_CHAN_MAINLCD,
+ .fourcc = V4L2_PIX_FMT_RGB565,
+ .interface_type = RGB24,
+ .clock_divider = 5,
+ .flags = 0,
+ .lcd_modes = &lcdc0_mode,
+ .num_modes = 1,
+ .panel_cfg = {
+ .width = 111,
+ .height = 68,
+ },
+ },
+};
+
+static struct resource lcdc0_resources[] = {
+ [0] = {
+ .name = "LCD0",
+ .start = 0xfe940000,
+ .end = 0xfe943fff,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = gic_spi(177),
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device lcdc0_device = {
+ .name = "sh_mobile_lcdc_fb",
+ .num_resources = ARRAY_SIZE(lcdc0_resources),
+ .resource = lcdc0_resources,
+ .id = 0,
+ .dev = {
+ .platform_data = &lcdc0_info,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ },
+};
+
+/*
+ * LCDC1/HDMI
+ */
+static struct sh_mobile_hdmi_info hdmi_info = {
+ .flags = HDMI_OUTPUT_PUSH_PULL |
+ HDMI_OUTPUT_POLARITY_HI |
+ HDMI_32BIT_REG |
+ HDMI_HAS_HTOP1 |
+ HDMI_SND_SRC_SPDIF,
+};
+
+static struct resource hdmi_resources[] = {
+ [0] = {
+ .name = "HDMI",
+ .start = 0xe6be0000,
+ .end = 0xe6be03ff,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = gic_spi(131),
+ .flags = IORESOURCE_IRQ,
+ },
+ [2] = {
+ .name = "HDMI emma3pf",
+ .start = 0xe6be4000,
+ .end = 0xe6be43ff,
+ .flags = IORESOURCE_MEM,
+ },
+};
+
+static struct platform_device hdmi_device = {
+ .name = "sh-mobile-hdmi",
+ .num_resources = ARRAY_SIZE(hdmi_resources),
+ .resource = hdmi_resources,
+ .id = -1,
+ .dev = {
+ .platform_data = &hdmi_info,
+ },
+};
+
+static const struct fb_videomode lcdc1_mode = {
+ .name = "HDMI 720p",
+ .xres = 1280,
+ .yres = 720,
+ .pixclock = 13468,
+ .left_margin = 220,
+ .right_margin = 110,
+ .hsync_len = 40,
+ .upper_margin = 20,
+ .lower_margin = 5,
+ .vsync_len = 5,
+ .refresh = 60,
+ .sync = FB_SYNC_VERT_HIGH_ACT | FB_SYNC_HOR_HIGH_ACT,
+};
+
+static struct sh_mobile_lcdc_info hdmi_lcdc_info = {
+ .clock_source = LCDC_CLK_PERIPHERAL, /* HDMI clock */
+ .ch[0] = {
+ .chan = LCDC_CHAN_MAINLCD,
+ .fourcc = V4L2_PIX_FMT_RGB565,
+ .interface_type = RGB24,
+ .clock_divider = 1,
+ .flags = LCDC_FLAGS_DWPOL,
+ .lcd_modes = &lcdc1_mode,
+ .num_modes = 1,
+ .tx_dev = &hdmi_device,
+ .panel_cfg = {
+ .width = 1280,
+ .height = 720,
+ },
+ },
+};
+
+static struct resource hdmi_lcdc_resources[] = {
+ [0] = {
+ .name = "LCDC1",
+ .start = 0xfe944000,
+ .end = 0xfe948000 - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = gic_spi(178),
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device hdmi_lcdc_device = {
+ .name = "sh_mobile_lcdc_fb",
+ .num_resources = ARRAY_SIZE(hdmi_lcdc_resources),
+ .resource = hdmi_lcdc_resources,
+ .id = 1,
+ .dev = {
+ .platform_data = &hdmi_lcdc_info,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ },
+};
+
+/* LEDS */
+static struct gpio_led gpio_leds[] = {
+ {
+ .name = "LED3",
+ .gpio = 102,
+ .default_state = LEDS_GPIO_DEFSTATE_ON,
+ }, {
+ .name = "LED4",
+ .gpio = 111,
+ .default_state = LEDS_GPIO_DEFSTATE_ON,
+ }, {
+ .name = "LED5",
+ .gpio = 110,
+ .default_state = LEDS_GPIO_DEFSTATE_ON,
+ }, {
+ .name = "LED6",
+ .gpio = 177,
+ .default_state = LEDS_GPIO_DEFSTATE_ON,
+ },
+};
+
+static struct gpio_led_platform_data leds_gpio_info = {
+ .leds = gpio_leds,
+ .num_leds = ARRAY_SIZE(gpio_leds),
+};
+
+static struct platform_device leds_gpio_device = {
+ .name = "leds-gpio",
+ .id = -1,
+ .dev = {
+ .platform_data = &leds_gpio_info,
+ },
+};
+
+/* GPIO KEY */
+#define GPIO_KEY(c, g, d, ...) \
+ { .code = c, .gpio = g, .desc = d, .active_low = 1, __VA_ARGS__ }
+
+static struct gpio_keys_button gpio_buttons[] = {
+ GPIO_KEY(KEY_POWER, 99, "SW3", .wakeup = 1),
+ GPIO_KEY(KEY_BACK, 100, "SW4"),
+ GPIO_KEY(KEY_MENU, 97, "SW5"),
+ GPIO_KEY(KEY_HOME, 98, "SW6"),
+};
+
+static struct gpio_keys_platform_data gpio_key_info = {
+ .buttons = gpio_buttons,
+ .nbuttons = ARRAY_SIZE(gpio_buttons),
+};
+
+static struct platform_device gpio_keys_device = {
+ .name = "gpio-keys",
+ .id = -1,
+ .dev = {
+ .platform_data = &gpio_key_info,
+ },
+};
+
+/* Fixed 3.3V regulator to be used by SDHI1, MMCIF */
+static struct regulator_consumer_supply fixed3v3_power_consumers[] = {
+ REGULATOR_SUPPLY("vmmc", "sh_mmcif"),
+ REGULATOR_SUPPLY("vqmmc", "sh_mmcif"),
+};
+
+/* Fixed 3.3V regulator used by LCD backlight */
+static struct regulator_consumer_supply fixed5v0_power_consumers[] = {
+ REGULATOR_SUPPLY("power", "pwm-backlight.0"),
+};
+
+/* Fixed 3.3V regulator to be used by SDHI0 */
+static struct regulator_consumer_supply vcc_sdhi0_consumers[] = {
+ REGULATOR_SUPPLY("vmmc", "sh_mobile_sdhi.0"),
+};
+
+static struct regulator_init_data vcc_sdhi0_init_data = {
+ .constraints = {
+ .valid_ops_mask = REGULATOR_CHANGE_STATUS,
+ },
+ .num_consumer_supplies = ARRAY_SIZE(vcc_sdhi0_consumers),
+ .consumer_supplies = vcc_sdhi0_consumers,
+};
+
+static struct fixed_voltage_config vcc_sdhi0_info = {
+ .supply_name = "SDHI0 Vcc",
+ .microvolts = 3300000,
+ .gpio = 75,
+ .enable_high = 1,
+ .init_data = &vcc_sdhi0_init_data,
+};
+
+static struct platform_device vcc_sdhi0 = {
+ .name = "reg-fixed-voltage",
+ .id = 1,
+ .dev = {
+ .platform_data = &vcc_sdhi0_info,
+ },
+};
+
+/* 1.8 / 3.3V SDHI0 VccQ regulator */
+static struct regulator_consumer_supply vccq_sdhi0_consumers[] = {
+ REGULATOR_SUPPLY("vqmmc", "sh_mobile_sdhi.0"),
+};
+
+static struct regulator_init_data vccq_sdhi0_init_data = {
+ .constraints = {
+ .input_uV = 3300000,
+ .min_uV = 1800000,
+ .max_uV = 3300000,
+ .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE |
+ REGULATOR_CHANGE_STATUS,
+ },
+ .num_consumer_supplies = ARRAY_SIZE(vccq_sdhi0_consumers),
+ .consumer_supplies = vccq_sdhi0_consumers,
+};
+
+static struct gpio vccq_sdhi0_gpios[] = {
+ {17, GPIOF_OUT_INIT_LOW, "vccq-sdhi0" },
+};
+
+static struct gpio_regulator_state vccq_sdhi0_states[] = {
+ { .value = 3300000, .gpios = (0 << 0) },
+ { .value = 1800000, .gpios = (1 << 0) },
+};
+
+static struct gpio_regulator_config vccq_sdhi0_info = {
+ .supply_name = "vqmmc",
+
+ .enable_gpio = 74,
+ .enable_high = 1,
+ .enabled_at_boot = 0,
+
+ .gpios = vccq_sdhi0_gpios,
+ .nr_gpios = ARRAY_SIZE(vccq_sdhi0_gpios),
+
+ .states = vccq_sdhi0_states,
+ .nr_states = ARRAY_SIZE(vccq_sdhi0_states),
+
+ .type = REGULATOR_VOLTAGE,
+ .init_data = &vccq_sdhi0_init_data,
+};
+
+static struct platform_device vccq_sdhi0 = {
+ .name = "gpio-regulator",
+ .id = -1,
+ .dev = {
+ .platform_data = &vccq_sdhi0_info,
+ },
+};
+
+/* Fixed 3.3V regulator to be used by SDHI1 */
+static struct regulator_consumer_supply vcc_sdhi1_consumers[] = {
+ REGULATOR_SUPPLY("vmmc", "sh_mobile_sdhi.1"),
+};
+
+static struct regulator_init_data vcc_sdhi1_init_data = {
+ .constraints = {
+ .valid_ops_mask = REGULATOR_CHANGE_STATUS,
+ },
+ .num_consumer_supplies = ARRAY_SIZE(vcc_sdhi1_consumers),
+ .consumer_supplies = vcc_sdhi1_consumers,
+};
+
+static struct fixed_voltage_config vcc_sdhi1_info = {
+ .supply_name = "SDHI1 Vcc",
+ .microvolts = 3300000,
+ .gpio = 16,
+ .enable_high = 1,
+ .init_data = &vcc_sdhi1_init_data,
+};
+
+static struct platform_device vcc_sdhi1 = {
+ .name = "reg-fixed-voltage",
+ .id = 2,
+ .dev = {
+ .platform_data = &vcc_sdhi1_info,
+ },
+};
+
+/* SDHI0 */
+static struct tmio_mmc_data sdhi0_info = {
+ .chan_priv_tx = (void *)SHDMA_SLAVE_SDHI0_TX,
+ .chan_priv_rx = (void *)SHDMA_SLAVE_SDHI0_RX,
+ .capabilities = MMC_CAP_SD_HIGHSPEED | MMC_CAP_SDIO_IRQ |
+ MMC_CAP_POWER_OFF_CARD,
+ .flags = TMIO_MMC_HAS_IDLE_WAIT | TMIO_MMC_USE_GPIO_CD,
+ .cd_gpio = 167,
+};
+
+static struct resource sdhi0_resources[] = {
+ {
+ .name = "SDHI0",
+ .start = 0xe6850000,
+ .end = 0xe6850100 - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ /*
+ * no SH_MOBILE_SDHI_IRQ_CARD_DETECT here
+ */
+ {
+ .name = SH_MOBILE_SDHI_IRQ_SDCARD,
+ .start = gic_spi(118),
+ .flags = IORESOURCE_IRQ,
+ },
+ {
+ .name = SH_MOBILE_SDHI_IRQ_SDIO,
+ .start = gic_spi(119),
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device sdhi0_device = {
+ .name = "sh_mobile_sdhi",
+ .id = 0,
+ .dev = {
+ .platform_data = &sdhi0_info,
+ },
+ .num_resources = ARRAY_SIZE(sdhi0_resources),
+ .resource = sdhi0_resources,
+};
+
+/* SDHI1 */
+static struct tmio_mmc_data sdhi1_info = {
+ .chan_priv_tx = (void *)SHDMA_SLAVE_SDHI1_TX,
+ .chan_priv_rx = (void *)SHDMA_SLAVE_SDHI1_RX,
+ .capabilities = MMC_CAP_SD_HIGHSPEED | MMC_CAP_SDIO_IRQ |
+ MMC_CAP_POWER_OFF_CARD,
+ .flags = TMIO_MMC_HAS_IDLE_WAIT | TMIO_MMC_USE_GPIO_CD,
+ /* Port72 cannot generate IRQs, will be used in polling mode. */
+ .cd_gpio = 72,
+};
+
+static struct resource sdhi1_resources[] = {
+ [0] = {
+ .name = "SDHI1",
+ .start = 0xe6860000,
+ .end = 0xe6860100 - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = gic_spi(121),
+ .flags = IORESOURCE_IRQ,
+ },
+ [2] = {
+ .start = gic_spi(122),
+ .flags = IORESOURCE_IRQ,
+ },
+ [3] = {
+ .start = gic_spi(123),
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device sdhi1_device = {
+ .name = "sh_mobile_sdhi",
+ .id = 1,
+ .dev = {
+ .platform_data = &sdhi1_info,
+ },
+ .num_resources = ARRAY_SIZE(sdhi1_resources),
+ .resource = sdhi1_resources,
+};
+
+static const struct pinctrl_map eva_sdhi1_pinctrl_map[] = {
+ PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.1", "pfc-r8a7740",
+ "sdhi1_data4", "sdhi1"),
+ PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.1", "pfc-r8a7740",
+ "sdhi1_ctrl", "sdhi1"),
+ PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.1", "pfc-r8a7740",
+ "sdhi1_cd", "sdhi1"),
+ PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.1", "pfc-r8a7740",
+ "sdhi1_wp", "sdhi1"),
+};
+
+/* MMCIF */
+static struct sh_mmcif_plat_data sh_mmcif_plat = {
+ .sup_pclk = 0,
+ .caps = MMC_CAP_4_BIT_DATA |
+ MMC_CAP_8_BIT_DATA |
+ MMC_CAP_NONREMOVABLE,
+ .ccs_unsupported = true,
+ .slave_id_tx = SHDMA_SLAVE_MMCIF_TX,
+ .slave_id_rx = SHDMA_SLAVE_MMCIF_RX,
+};
+
+static struct resource sh_mmcif_resources[] = {
+ [0] = {
+ .name = "MMCIF",
+ .start = 0xe6bd0000,
+ .end = 0xe6bd0100 - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ /* MMC ERR */
+ .start = gic_spi(56),
+ .flags = IORESOURCE_IRQ,
+ },
+ [2] = {
+ /* MMC NOR */
+ .start = gic_spi(57),
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device sh_mmcif_device = {
+ .name = "sh_mmcif",
+ .id = -1,
+ .dev = {
+ .platform_data = &sh_mmcif_plat,
+ },
+ .num_resources = ARRAY_SIZE(sh_mmcif_resources),
+ .resource = sh_mmcif_resources,
+};
+
+/* Camera */
+static int mt9t111_power(struct device *dev, int mode)
+{
+ struct clk *mclk = clk_get(NULL, "video1");
+
+ if (IS_ERR(mclk)) {
+ dev_err(dev, "can't get video1 clock\n");
+ return -EINVAL;
+ }
+
+ if (mode) {
+ /* video1 (= CON1 camera) expect 24MHz */
+ clk_set_rate(mclk, clk_round_rate(mclk, 24000000));
+ clk_enable(mclk);
+ gpio_set_value(158, 1);
+ } else {
+ gpio_set_value(158, 0);
+ clk_disable(mclk);
+ }
+
+ clk_put(mclk);
+
+ return 0;
+}
+
+static struct i2c_board_info i2c_camera_mt9t111 = {
+ I2C_BOARD_INFO("mt9t112", 0x3d),
+};
+
+static struct mt9t112_camera_info mt9t111_info = {
+ .divider = { 16, 0, 0, 7, 0, 10, 14, 7, 7 },
+};
+
+static struct soc_camera_link mt9t111_link = {
+ .i2c_adapter_id = 0,
+ .bus_id = 0,
+ .board_info = &i2c_camera_mt9t111,
+ .power = mt9t111_power,
+ .priv = &mt9t111_info,
+};
+
+static struct platform_device camera_device = {
+ .name = "soc-camera-pdrv",
+ .id = 0,
+ .dev = {
+ .platform_data = &mt9t111_link,
+ },
+};
+
+/* CEU0 */
+static struct sh_mobile_ceu_info sh_mobile_ceu0_info = {
+ .flags = SH_CEU_FLAG_LOWER_8BIT,
+};
+
+static struct resource ceu0_resources[] = {
+ [0] = {
+ .name = "CEU",
+ .start = 0xfe910000,
+ .end = 0xfe91009f,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = gic_spi(160),
+ .flags = IORESOURCE_IRQ,
+ },
+ [2] = {
+ /* place holder for contiguous memory */
+ },
+};
+
+static struct platform_device ceu0_device = {
+ .name = "sh_mobile_ceu",
+ .id = 0,
+ .num_resources = ARRAY_SIZE(ceu0_resources),
+ .resource = ceu0_resources,
+ .dev = {
+ .platform_data = &sh_mobile_ceu0_info,
+ .coherent_dma_mask = 0xffffffff,
+ },
+};
+
+/* FSI */
+static struct sh_fsi_platform_info fsi_info = {
+ /* FSI-WM8978 */
+ .port_a = {
+ .tx_id = SHDMA_SLAVE_FSIA_TX,
+ },
+ /* FSI-HDMI */
+ .port_b = {
+ .flags = SH_FSI_FMT_SPDIF |
+ SH_FSI_ENABLE_STREAM_MODE |
+ SH_FSI_CLK_CPG,
+ .tx_id = SHDMA_SLAVE_FSIB_TX,
+ }
+};
+
+static struct resource fsi_resources[] = {
+ [0] = {
+ .name = "FSI",
+ .start = 0xfe1f0000,
+ .end = 0xfe1f0400 - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = gic_spi(9),
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device fsi_device = {
+ .name = "sh_fsi2",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(fsi_resources),
+ .resource = fsi_resources,
+ .dev = {
+ .platform_data = &fsi_info,
+ },
+};
+
+/* FSI-WM8978 */
+static struct asoc_simple_card_info fsi_wm8978_info = {
+ .name = "wm8978",
+ .card = "FSI2A-WM8978",
+ .codec = "wm8978.0-001a",
+ .platform = "sh_fsi2",
+ .daifmt = SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_CBM_CFM,
+ .cpu_dai = {
+ .name = "fsia-dai",
+ },
+ .codec_dai = {
+ .name = "wm8978-hifi",
+ .sysclk = 12288000,
+ },
+};
+
+static struct platform_device fsi_wm8978_device = {
+ .name = "asoc-simple-card",
+ .id = 0,
+ .dev = {
+ .platform_data = &fsi_wm8978_info,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ .dma_mask = &fsi_wm8978_device.dev.coherent_dma_mask,
+ },
+};
+
+/* FSI-HDMI */
+static struct asoc_simple_card_info fsi2_hdmi_info = {
+ .name = "HDMI",
+ .card = "FSI2B-HDMI",
+ .codec = "sh-mobile-hdmi",
+ .platform = "sh_fsi2",
+ .daifmt = SND_SOC_DAIFMT_CBS_CFS,
+ .cpu_dai = {
+ .name = "fsib-dai",
+ },
+ .codec_dai = {
+ .name = "sh_mobile_hdmi-hifi",
+ },
+};
+
+static struct platform_device fsi_hdmi_device = {
+ .name = "asoc-simple-card",
+ .id = 1,
+ .dev = {
+ .platform_data = &fsi2_hdmi_info,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ .dma_mask = &fsi_hdmi_device.dev.coherent_dma_mask,
+ },
+};
+
+/* RTC: RTC connects i2c-gpio. */
+static struct i2c_gpio_platform_data i2c_gpio_data = {
+ .sda_pin = 208,
+ .scl_pin = 91,
+ .udelay = 5, /* 100 kHz */
+};
+
+static struct platform_device i2c_gpio_device = {
+ .name = "i2c-gpio",
+ .id = 2,
+ .dev = {
+ .platform_data = &i2c_gpio_data,
+ },
+};
+
+/* I2C */
+static struct st1232_pdata st1232_i2c0_pdata = {
+ .reset_gpio = 166,
+};
+
+static struct i2c_board_info i2c0_devices[] = {
+ {
+ I2C_BOARD_INFO("st1232-ts", 0x55),
+ .irq = irq_pin(10),
+ .platform_data = &st1232_i2c0_pdata,
+ },
+ {
+ I2C_BOARD_INFO("wm8978", 0x1a),
+ },
+};
+
+static struct i2c_board_info i2c2_devices[] = {
+ {
+ I2C_BOARD_INFO("s35390a", 0x30),
+ .type = "s35390a",
+ },
+};
+
+/*
+ * board devices
+ */
+static struct platform_device *eva_devices[] __initdata = {
+ &lcdc0_device,
+ &pwm_device,
+ &pwm_backlight_device,
+ &leds_gpio_device,
+ &gpio_keys_device,
+ &sh_eth_device,
+ &vcc_sdhi0,
+ &vccq_sdhi0,
+ &sdhi0_device,
+ &sh_mmcif_device,
+ &hdmi_device,
+ &hdmi_lcdc_device,
+ &camera_device,
+ &ceu0_device,
+ &fsi_device,
+ &fsi_wm8978_device,
+ &fsi_hdmi_device,
+ &i2c_gpio_device,
+};
+
+static const struct pinctrl_map eva_pinctrl_map[] = {
+ /* CEU0 */
+ PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_ceu.0", "pfc-r8a7740",
+ "ceu0_data_0_7", "ceu0"),
+ PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_ceu.0", "pfc-r8a7740",
+ "ceu0_clk_0", "ceu0"),
+ PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_ceu.0", "pfc-r8a7740",
+ "ceu0_sync", "ceu0"),
+ PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_ceu.0", "pfc-r8a7740",
+ "ceu0_field", "ceu0"),
+ /* FSIA */
+ PIN_MAP_MUX_GROUP_DEFAULT("asoc-simple-card.0", "pfc-r8a7740",
+ "fsia_sclk_in", "fsia"),
+ PIN_MAP_MUX_GROUP_DEFAULT("asoc-simple-card.0", "pfc-r8a7740",
+ "fsia_mclk_out", "fsia"),
+ PIN_MAP_MUX_GROUP_DEFAULT("asoc-simple-card.0", "pfc-r8a7740",
+ "fsia_data_in_1", "fsia"),
+ PIN_MAP_MUX_GROUP_DEFAULT("asoc-simple-card.0", "pfc-r8a7740",
+ "fsia_data_out_0", "fsia"),
+ /* FSIB */
+ PIN_MAP_MUX_GROUP_DEFAULT("asoc-simple-card.1", "pfc-r8a7740",
+ "fsib_mclk_in", "fsib"),
+ /* GETHER */
+ PIN_MAP_MUX_GROUP_DEFAULT("r8a7740-gether", "pfc-r8a7740",
+ "gether_mii", "gether"),
+ PIN_MAP_MUX_GROUP_DEFAULT("r8a7740-gether", "pfc-r8a7740",
+ "gether_int", "gether"),
+ /* HDMI */
+ PIN_MAP_MUX_GROUP_DEFAULT("sh-mobile-hdmi", "pfc-r8a7740",
+ "hdmi", "hdmi"),
+ /* LCD0 */
+ PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_lcdc_fb.0", "pfc-r8a7740",
+ "lcd0_data24_0", "lcd0"),
+ PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_lcdc_fb.0", "pfc-r8a7740",
+ "lcd0_lclk_1", "lcd0"),
+ PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_lcdc_fb.0", "pfc-r8a7740",
+ "lcd0_sync", "lcd0"),
+ /* MMCIF */
+ PIN_MAP_MUX_GROUP_DEFAULT("sh_mmcif.0", "pfc-r8a7740",
+ "mmc0_data8_1", "mmc0"),
+ PIN_MAP_MUX_GROUP_DEFAULT("sh_mmcif.0", "pfc-r8a7740",
+ "mmc0_ctrl_1", "mmc0"),
+ /* SCIFA1 */
+ PIN_MAP_MUX_GROUP_DEFAULT("sh-sci.1", "pfc-r8a7740",
+ "scifa1_data", "scifa1"),
+ /* SDHI0 */
+ PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.0", "pfc-r8a7740",
+ "sdhi0_data4", "sdhi0"),
+ PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.0", "pfc-r8a7740",
+ "sdhi0_ctrl", "sdhi0"),
+ PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.0", "pfc-r8a7740",
+ "sdhi0_wp", "sdhi0"),
+ /* ST1232 */
+ PIN_MAP_MUX_GROUP_DEFAULT("0-0055", "pfc-r8a7740",
+ "intc_irq10", "intc"),
+ /* TPU0 */
+ PIN_MAP_MUX_GROUP_DEFAULT("renesas-tpu-pwm", "pfc-r8a7740",
+ "tpu0_to2_1", "tpu0"),
+ /* USBHS */
+ PIN_MAP_MUX_GROUP_DEFAULT("renesas_usbhs", "pfc-r8a7740",
+ "intc_irq7_1", "intc"),
+};
+
+static void __init eva_clock_init(void)
+{
+ struct clk *system = clk_get(NULL, "system_clk");
+ struct clk *xtal1 = clk_get(NULL, "extal1");
+ struct clk *usb24s = clk_get(NULL, "usb24s");
+ struct clk *fsibck = clk_get(NULL, "fsibck");
+
+ if (IS_ERR(system) ||
+ IS_ERR(xtal1) ||
+ IS_ERR(usb24s) ||
+ IS_ERR(fsibck)) {
+ pr_err("armadillo800eva board clock init failed\n");
+ goto clock_error;
+ }
+
+ /* armadillo 800 eva extal1 is 24MHz */
+ clk_set_rate(xtal1, 24000000);
+
+ /* usb24s use extal1 (= system) clock (= 24MHz) */
+ clk_set_parent(usb24s, system);
+
+ /* FSIBCK is 12.288MHz, and it is parent of FSI-B */
+ clk_set_rate(fsibck, 12288000);
+
+clock_error:
+ if (!IS_ERR(system))
+ clk_put(system);
+ if (!IS_ERR(xtal1))
+ clk_put(xtal1);
+ if (!IS_ERR(usb24s))
+ clk_put(usb24s);
+ if (!IS_ERR(fsibck))
+ clk_put(fsibck);
+}
+
+/*
+ * board init
+ */
+#define GPIO_PORT7CR IOMEM(0xe6050007)
+#define GPIO_PORT8CR IOMEM(0xe6050008)
+static void __init eva_init(void)
+{
+ static struct pm_domain_device domain_devices[] __initdata = {
+ { "A4LC", &lcdc0_device },
+ { "A4LC", &hdmi_lcdc_device },
+ { "A4MP", &hdmi_device },
+ { "A4MP", &fsi_device },
+ { "A4R", &ceu0_device },
+ { "A4S", &sh_eth_device },
+ { "A3SP", &pwm_device },
+ { "A3SP", &sdhi0_device },
+ { "A3SP", &sh_mmcif_device },
+ };
+ struct platform_device *usb = NULL, *sdhi1 = NULL;
+
+ regulator_register_always_on(0, "fixed-3.3V", fixed3v3_power_consumers,
+ ARRAY_SIZE(fixed3v3_power_consumers), 3300000);
+ regulator_register_always_on(3, "fixed-5.0V", fixed5v0_power_consumers,
+ ARRAY_SIZE(fixed5v0_power_consumers), 5000000);
+
+ pinctrl_register_mappings(eva_pinctrl_map, ARRAY_SIZE(eva_pinctrl_map));
+ pwm_add_table(pwm_lookup, ARRAY_SIZE(pwm_lookup));
+
+ r8a7740_pinmux_init();
+ r8a7740_meram_workaround();
+
+ /* GETHER */
+ gpio_request_one(18, GPIOF_OUT_INIT_HIGH, NULL); /* PHY_RST */
+
+ /* USB */
+ gpio_request_one(159, GPIOF_IN, NULL); /* USB_DEVICE_MODE */
+
+ if (gpio_get_value(159)) {
+ /* USB Host */
+ } else {
+ /* USB Func */
+ /*
+ * The USBHS interrupt handlers needs to read the IRQ pin value
+ * (HI/LOW) to diffentiate USB connection and disconnection
+ * events (usbhsf_get_vbus()). We thus need to select both the
+ * intc_irq7_1 pin group and GPIO 209 here.
+ */
+ gpio_request_one(209, GPIOF_IN, NULL);
+
+ platform_device_register(&usbhsf_device);
+ usb = &usbhsf_device;
+ }
+
+ /* CON1/CON15 Camera */
+ gpio_request_one(173, GPIOF_OUT_INIT_LOW, NULL); /* STANDBY */
+ gpio_request_one(172, GPIOF_OUT_INIT_HIGH, NULL); /* RST */
+ /* see mt9t111_power() */
+ gpio_request_one(158, GPIOF_OUT_INIT_LOW, NULL); /* CAM_PON */
+
+ /* FSI-WM8978 */
+ gpio_request(7, NULL);
+ gpio_request(8, NULL);
+ gpio_direction_none(GPIO_PORT7CR); /* FSIAOBT needs no direction */
+ gpio_direction_none(GPIO_PORT8CR); /* FSIAOLR needs no direction */
+
+ /*
+ * CAUTION
+ *
+ * DBGMD/LCDC0/FSIA MUX
+ * DBGMD_SELECT_B should be set after setting PFC Function.
+ */
+ gpio_request_one(176, GPIOF_OUT_INIT_HIGH, NULL);
+
+ /*
+ * We can switch CON8/CON14 by SW1.5,
+ * but it needs after DBGMD_SELECT_B
+ */
+ gpio_request_one(6, GPIOF_IN, NULL);
+ if (gpio_get_value(6)) {
+ /* CON14 enable */
+ } else {
+ /* CON8 (SDHI1) enable */
+ pinctrl_register_mappings(eva_sdhi1_pinctrl_map,
+ ARRAY_SIZE(eva_sdhi1_pinctrl_map));
+
+ platform_device_register(&vcc_sdhi1);
+ platform_device_register(&sdhi1_device);
+ sdhi1 = &sdhi1_device;
+ }
+
+
+#ifdef CONFIG_CACHE_L2X0
+ /* Shared attribute override enable, 32K*8way */
+ l2x0_init(IOMEM(0xf0002000), 0x00400000, 0xc20f0fff);
+#endif
+
+ i2c_register_board_info(0, i2c0_devices, ARRAY_SIZE(i2c0_devices));
+ i2c_register_board_info(2, i2c2_devices, ARRAY_SIZE(i2c2_devices));
+
+ r8a7740_add_standard_devices();
+
+ platform_add_devices(eva_devices,
+ ARRAY_SIZE(eva_devices));
+
+ rmobile_add_devices_to_domains(domain_devices,
+ ARRAY_SIZE(domain_devices));
+ if (usb)
+ rmobile_add_device_to_domain("A3SP", usb);
+ if (sdhi1)
+ rmobile_add_device_to_domain("A3SP", sdhi1);
+
+ r8a7740_pm_init();
+}
+
+static void __init eva_earlytimer_init(void)
+{
+ r8a7740_clock_init(MD_CK0 | MD_CK2);
+ shmobile_earlytimer_init();
+
+ /* the rate of extal1 clock must be set before late_time_init */
+ eva_clock_init();
+}
+
+#define RESCNT2 IOMEM(0xe6188020)
+static void eva_restart(enum reboot_mode mode, const char *cmd)
+{
+ /* Do soft power on reset */
+ writel((1 << 31), RESCNT2);
+}
+
+static const char *eva_boards_compat_dt[] __initdata = {
+ "renesas,armadillo800eva",
+ NULL,
+};
+
+DT_MACHINE_START(ARMADILLO800EVA_DT, "armadillo800eva")
+ .map_io = r8a7740_map_io,
+ .init_early = r8a7740_add_early_devices,
+ .init_irq = r8a7740_init_irq_of,
+ .init_machine = eva_init,
+ .init_late = shmobile_init_late,
+ .init_time = eva_earlytimer_init,
+ .dt_compat = eva_boards_compat_dt,
+ .restart = eva_restart,
+MACHINE_END