summaryrefslogtreecommitdiff
path: root/arch/arm/mach-spear/spear3xx.c
diff options
context:
space:
mode:
Diffstat (limited to 'arch/arm/mach-spear/spear3xx.c')
-rw-r--r--arch/arm/mach-spear/spear3xx.c116
1 files changed, 116 insertions, 0 deletions
diff --git a/arch/arm/mach-spear/spear3xx.c b/arch/arm/mach-spear/spear3xx.c
new file mode 100644
index 000000000..bf3b1fd8c
--- /dev/null
+++ b/arch/arm/mach-spear/spear3xx.c
@@ -0,0 +1,116 @@
+/*
+ * arch/arm/mach-spear3xx/spear3xx.c
+ *
+ * SPEAr3XX machines common source file
+ *
+ * Copyright (C) 2009-2012 ST Microelectronics
+ * Viresh Kumar <viresh.linux@gmail.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#define pr_fmt(fmt) "SPEAr3xx: " fmt
+
+#include <linux/amba/pl022.h>
+#include <linux/amba/pl080.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+#include <asm/mach/map.h>
+#include "pl080.h"
+#include "generic.h"
+#include <mach/spear.h>
+#include <mach/misc_regs.h>
+
+/* ssp device registration */
+struct pl022_ssp_controller pl022_plat_data = {
+ .bus_id = 0,
+ .enable_dma = 1,
+ .dma_filter = pl08x_filter_id,
+ .dma_tx_param = "ssp0_tx",
+ .dma_rx_param = "ssp0_rx",
+ /*
+ * This is number of spi devices that can be connected to spi. There are
+ * two type of chipselects on which slave devices can work. One is chip
+ * select provided by spi masters other is controlled through external
+ * gpio's. We can't use chipselect provided from spi master (because as
+ * soon as FIFO becomes empty, CS is disabled and transfer ends). So
+ * this number now depends on number of gpios available for spi. each
+ * slave on each master requires a separate gpio pin.
+ */
+ .num_chipselect = 2,
+};
+
+/* dmac device registration */
+struct pl08x_platform_data pl080_plat_data = {
+ .memcpy_channel = {
+ .bus_id = "memcpy",
+ .cctl_memcpy =
+ (PL080_BSIZE_16 << PL080_CONTROL_SB_SIZE_SHIFT | \
+ PL080_BSIZE_16 << PL080_CONTROL_DB_SIZE_SHIFT | \
+ PL080_WIDTH_32BIT << PL080_CONTROL_SWIDTH_SHIFT | \
+ PL080_WIDTH_32BIT << PL080_CONTROL_DWIDTH_SHIFT | \
+ PL080_CONTROL_PROT_BUFF | PL080_CONTROL_PROT_CACHE | \
+ PL080_CONTROL_PROT_SYS),
+ },
+ .lli_buses = PL08X_AHB1,
+ .mem_buses = PL08X_AHB1,
+ .get_xfer_signal = pl080_get_signal,
+ .put_xfer_signal = pl080_put_signal,
+};
+
+/*
+ * Following will create 16MB static virtual/physical mappings
+ * PHYSICAL VIRTUAL
+ * 0xD0000000 0xFD000000
+ * 0xFC000000 0xFC000000
+ */
+struct map_desc spear3xx_io_desc[] __initdata = {
+ {
+ .virtual = (unsigned long)VA_SPEAR_ICM1_2_BASE,
+ .pfn = __phys_to_pfn(SPEAR_ICM1_2_BASE),
+ .length = SZ_16M,
+ .type = MT_DEVICE
+ }, {
+ .virtual = (unsigned long)VA_SPEAR_ICM3_SMI_CTRL_BASE,
+ .pfn = __phys_to_pfn(SPEAR_ICM3_SMI_CTRL_BASE),
+ .length = SZ_16M,
+ .type = MT_DEVICE
+ },
+};
+
+/* This will create static memory mapping for selected devices */
+void __init spear3xx_map_io(void)
+{
+ iotable_init(spear3xx_io_desc, ARRAY_SIZE(spear3xx_io_desc));
+}
+
+void __init spear3xx_timer_init(void)
+{
+ char pclk_name[] = "pll3_clk";
+ struct clk *gpt_clk, *pclk;
+
+ spear3xx_clk_init(MISC_BASE, VA_SPEAR320_SOC_CONFIG_BASE);
+
+ /* get the system timer clock */
+ gpt_clk = clk_get_sys("gpt0", NULL);
+ if (IS_ERR(gpt_clk)) {
+ pr_err("%s:couldn't get clk for gpt\n", __func__);
+ BUG();
+ }
+
+ /* get the suitable parent clock for timer*/
+ pclk = clk_get(NULL, pclk_name);
+ if (IS_ERR(pclk)) {
+ pr_err("%s:couldn't get %s as parent for gpt\n",
+ __func__, pclk_name);
+ BUG();
+ }
+
+ clk_set_parent(gpt_clk, pclk);
+ clk_put(gpt_clk);
+ clk_put(pclk);
+
+ spear_setup_of_timer();
+}