summaryrefslogtreecommitdiff
path: root/arch/arm/mach-u300
diff options
context:
space:
mode:
Diffstat (limited to 'arch/arm/mach-u300')
-rw-r--r--arch/arm/mach-u300/Kconfig44
-rw-r--r--arch/arm/mach-u300/Makefile8
-rw-r--r--arch/arm/mach-u300/Makefile.boot4
-rw-r--r--arch/arm/mach-u300/core.c415
-rw-r--r--arch/arm/mach-u300/dummyspichip.c277
-rw-r--r--arch/arm/mach-u300/regulator.c132
6 files changed, 880 insertions, 0 deletions
diff --git a/arch/arm/mach-u300/Kconfig b/arch/arm/mach-u300/Kconfig
new file mode 100644
index 000000000..bc51a7139
--- /dev/null
+++ b/arch/arm/mach-u300/Kconfig
@@ -0,0 +1,44 @@
+menuconfig ARCH_U300
+ bool "ST-Ericsson U300 Series" if ARCH_MULTI_V5
+ depends on MMU
+ select ARCH_REQUIRE_GPIOLIB
+ select ARM_AMBA
+ select ARM_VIC
+ select CLKSRC_MMIO
+ select CPU_ARM926T
+ select HAVE_TCM
+ select PINCTRL
+ select PINCTRL_COH901
+ select PINCTRL_U300
+ select MFD_SYSCON
+ help
+ Support for ST-Ericsson U300 series mobile platforms.
+
+if ARCH_U300
+
+config MACH_U300
+ depends on ARCH_U300
+ bool "U300"
+ default y
+
+config U300_DEBUG
+ depends on ARCH_U300
+ bool "Debug support for U300"
+ depends on PM
+ help
+ Debug support for U300 in sysfs, procfs etc.
+
+config MACH_U300_SPIDUMMY
+ depends on ARCH_U300
+ bool "SSP/SPI dummy chip"
+ select SPI
+ select SPI_MASTER
+ select SPI_PL022
+ help
+ This creates a small kernel module that creates a dummy
+ SPI device to be used for loopback tests. Regularly used
+ to test reference designs. If you're not testing SPI,
+ you don't need it. Selecting this will activate the
+ SPI framework and ARM PL022 support.
+
+endif
diff --git a/arch/arm/mach-u300/Makefile b/arch/arm/mach-u300/Makefile
new file mode 100644
index 000000000..87d37de05
--- /dev/null
+++ b/arch/arm/mach-u300/Makefile
@@ -0,0 +1,8 @@
+#
+# Makefile for the linux kernel, U300 machine.
+#
+
+obj-y := core.o
+
+obj-$(CONFIG_MACH_U300_SPIDUMMY) += dummyspichip.o
+obj-$(CONFIG_REGULATOR_AB3100) += regulator.o
diff --git a/arch/arm/mach-u300/Makefile.boot b/arch/arm/mach-u300/Makefile.boot
new file mode 100644
index 000000000..87811de0b
--- /dev/null
+++ b/arch/arm/mach-u300/Makefile.boot
@@ -0,0 +1,4 @@
+ zreladdr-y += 0x48008000
+params_phys-y := 0x48000100
+# This isn't used.
+#initrd_phys-y := 0x48800000
diff --git a/arch/arm/mach-u300/core.c b/arch/arm/mach-u300/core.c
new file mode 100644
index 000000000..35670b15f
--- /dev/null
+++ b/arch/arm/mach-u300/core.c
@@ -0,0 +1,415 @@
+/*
+ *
+ * arch/arm/mach-u300/core.c
+ *
+ *
+ * Copyright (C) 2007-2012 ST-Ericsson SA
+ * License terms: GNU General Public License (GPL) version 2
+ * Core platform support, IRQ handling and device definitions.
+ * Author: Linus Walleij <linus.walleij@stericsson.com>
+ */
+#include <linux/kernel.h>
+#include <linux/pinctrl/machine.h>
+#include <linux/pinctrl/pinconf-generic.h>
+#include <linux/platform_data/clk-u300.h>
+#include <linux/irqchip.h>
+#include <linux/of_address.h>
+#include <linux/of_platform.h>
+#include <linux/clocksource.h>
+#include <linux/clk.h>
+
+#include <asm/mach/map.h>
+#include <asm/mach/arch.h>
+
+/*
+ * These are the large blocks of memory allocated for I/O.
+ * the defines are used for setting up the I/O memory mapping.
+ */
+
+/* NAND Flash CS0 */
+#define U300_NAND_CS0_PHYS_BASE 0x80000000
+/* NFIF */
+#define U300_NAND_IF_PHYS_BASE 0x9f800000
+/* ALE, CLE offset for FSMC NAND */
+#define PLAT_NAND_CLE (1 << 16)
+#define PLAT_NAND_ALE (1 << 17)
+/* AHB Peripherals */
+#define U300_AHB_PER_PHYS_BASE 0xa0000000
+#define U300_AHB_PER_VIRT_BASE 0xff010000
+/* FAST Peripherals */
+#define U300_FAST_PER_PHYS_BASE 0xc0000000
+#define U300_FAST_PER_VIRT_BASE 0xff020000
+/* SLOW Peripherals */
+#define U300_SLOW_PER_PHYS_BASE 0xc0010000
+#define U300_SLOW_PER_VIRT_BASE 0xff000000
+/* Boot ROM */
+#define U300_BOOTROM_PHYS_BASE 0xffff0000
+#define U300_BOOTROM_VIRT_BASE 0xffff0000
+/* SEMI config base */
+#define U300_SEMI_CONFIG_BASE 0x2FFE0000
+
+/*
+ * AHB peripherals
+ */
+
+/* AHB Peripherals Bridge Controller */
+#define U300_AHB_BRIDGE_BASE (U300_AHB_PER_PHYS_BASE+0x0000)
+/* Vectored Interrupt Controller 0, servicing 32 interrupts */
+#define U300_INTCON0_BASE (U300_AHB_PER_PHYS_BASE+0x1000)
+#define U300_INTCON0_VBASE IOMEM(U300_AHB_PER_VIRT_BASE+0x1000)
+/* Vectored Interrupt Controller 1, servicing 32 interrupts */
+#define U300_INTCON1_BASE (U300_AHB_PER_PHYS_BASE+0x2000)
+#define U300_INTCON1_VBASE IOMEM(U300_AHB_PER_VIRT_BASE+0x2000)
+/* Memory Stick Pro (MSPRO) controller */
+#define U300_MSPRO_BASE (U300_AHB_PER_PHYS_BASE+0x3000)
+/* EMIF Configuration Area */
+#define U300_EMIF_CFG_BASE (U300_AHB_PER_PHYS_BASE+0x4000)
+
+/*
+ * FAST peripherals
+ */
+
+/* FAST bridge control */
+#define U300_FAST_BRIDGE_BASE (U300_FAST_PER_PHYS_BASE+0x0000)
+/* MMC/SD controller */
+#define U300_MMCSD_BASE (U300_FAST_PER_PHYS_BASE+0x1000)
+/* PCM I2S0 controller */
+#define U300_PCM_I2S0_BASE (U300_FAST_PER_PHYS_BASE+0x2000)
+/* PCM I2S1 controller */
+#define U300_PCM_I2S1_BASE (U300_FAST_PER_PHYS_BASE+0x3000)
+/* I2C0 controller */
+#define U300_I2C0_BASE (U300_FAST_PER_PHYS_BASE+0x4000)
+/* I2C1 controller */
+#define U300_I2C1_BASE (U300_FAST_PER_PHYS_BASE+0x5000)
+/* SPI controller */
+#define U300_SPI_BASE (U300_FAST_PER_PHYS_BASE+0x6000)
+/* Fast UART1 on U335 only */
+#define U300_UART1_BASE (U300_FAST_PER_PHYS_BASE+0x7000)
+
+/*
+ * SLOW peripherals
+ */
+
+/* SLOW bridge control */
+#define U300_SLOW_BRIDGE_BASE (U300_SLOW_PER_PHYS_BASE)
+/* SYSCON */
+#define U300_SYSCON_BASE (U300_SLOW_PER_PHYS_BASE+0x1000)
+#define U300_SYSCON_VBASE IOMEM(U300_SLOW_PER_VIRT_BASE+0x1000)
+/* Watchdog */
+#define U300_WDOG_BASE (U300_SLOW_PER_PHYS_BASE+0x2000)
+/* UART0 */
+#define U300_UART0_BASE (U300_SLOW_PER_PHYS_BASE+0x3000)
+/* APP side special timer */
+#define U300_TIMER_APP_BASE (U300_SLOW_PER_PHYS_BASE+0x4000)
+#define U300_TIMER_APP_VBASE IOMEM(U300_SLOW_PER_VIRT_BASE+0x4000)
+/* Keypad */
+#define U300_KEYPAD_BASE (U300_SLOW_PER_PHYS_BASE+0x5000)
+/* GPIO */
+#define U300_GPIO_BASE (U300_SLOW_PER_PHYS_BASE+0x6000)
+/* RTC */
+#define U300_RTC_BASE (U300_SLOW_PER_PHYS_BASE+0x7000)
+/* Bus tracer */
+#define U300_BUSTR_BASE (U300_SLOW_PER_PHYS_BASE+0x8000)
+/* Event handler (hardware queue) */
+#define U300_EVHIST_BASE (U300_SLOW_PER_PHYS_BASE+0x9000)
+/* Genric Timer */
+#define U300_TIMER_BASE (U300_SLOW_PER_PHYS_BASE+0xa000)
+/* PPM */
+#define U300_PPM_BASE (U300_SLOW_PER_PHYS_BASE+0xb000)
+
+/*
+ * REST peripherals
+ */
+
+/* ISP (image signal processor) */
+#define U300_ISP_BASE (0xA0008000)
+/* DMA Controller base */
+#define U300_DMAC_BASE (0xC0020000)
+/* MSL Base */
+#define U300_MSL_BASE (0xc0022000)
+/* APEX Base */
+#define U300_APEX_BASE (0xc0030000)
+/* Video Encoder Base */
+#define U300_VIDEOENC_BASE (0xc0080000)
+/* XGAM Base */
+#define U300_XGAM_BASE (0xd0000000)
+
+/*
+ * SYSCON addresses applicable to the core machine.
+ */
+
+/* Chip ID register 16bit (R/-) */
+#define U300_SYSCON_CIDR (0x400)
+/* SMCR */
+#define U300_SYSCON_SMCR (0x4d0)
+#define U300_SYSCON_SMCR_FIELD_MASK (0x000e)
+#define U300_SYSCON_SMCR_SEMI_SREFACK_IND (0x0008)
+#define U300_SYSCON_SMCR_SEMI_SREFREQ_ENABLE (0x0004)
+#define U300_SYSCON_SMCR_SEMI_EXT_BOOT_MODE_ENABLE (0x0002)
+/* CPU_SW_DBGEN Software Debug Enable 16bit (R/W) */
+#define U300_SYSCON_CSDR (0x4f0)
+#define U300_SYSCON_CSDR_SW_DEBUG_ENABLE (0x0001)
+/* PRINT_CONTROL Print Control 16bit (R/-) */
+#define U300_SYSCON_PCR (0x4f8)
+#define U300_SYSCON_PCR_SERV_IND (0x0001)
+/* BOOT_CONTROL 16bit (R/-) */
+#define U300_SYSCON_BCR (0x4fc)
+#define U300_SYSCON_BCR_ACC_CPU_SUBSYS_VINITHI_IND (0x0400)
+#define U300_SYSCON_BCR_APP_CPU_SUBSYS_VINITHI_IND (0x0200)
+#define U300_SYSCON_BCR_EXTRA_BOOT_OPTION_MASK (0x01FC)
+#define U300_SYSCON_BCR_APP_BOOT_SERV_MASK (0x0003)
+
+static void __iomem *syscon_base;
+
+/*
+ * Static I/O mappings that are needed for booting the U300 platforms. The
+ * only things we need are the areas where we find the timer, syscon and
+ * intcon, since the remaining device drivers will map their own memory
+ * physical to virtual as the need arise.
+ */
+static struct map_desc u300_io_desc[] __initdata = {
+ {
+ .virtual = U300_SLOW_PER_VIRT_BASE,
+ .pfn = __phys_to_pfn(U300_SLOW_PER_PHYS_BASE),
+ .length = SZ_64K,
+ .type = MT_DEVICE,
+ },
+ {
+ .virtual = U300_AHB_PER_VIRT_BASE,
+ .pfn = __phys_to_pfn(U300_AHB_PER_PHYS_BASE),
+ .length = SZ_32K,
+ .type = MT_DEVICE,
+ },
+ {
+ .virtual = U300_FAST_PER_VIRT_BASE,
+ .pfn = __phys_to_pfn(U300_FAST_PER_PHYS_BASE),
+ .length = SZ_32K,
+ .type = MT_DEVICE,
+ },
+};
+
+static void __init u300_map_io(void)
+{
+ iotable_init(u300_io_desc, ARRAY_SIZE(u300_io_desc));
+}
+
+static unsigned long pin_pullup_conf[] = {
+ PIN_CONF_PACKED(PIN_CONFIG_BIAS_PULL_UP, 1),
+};
+
+static unsigned long pin_highz_conf[] = {
+ PIN_CONF_PACKED(PIN_CONFIG_BIAS_HIGH_IMPEDANCE, 0),
+};
+
+/* Pin control settings */
+static struct pinctrl_map __initdata u300_pinmux_map[] = {
+ /* anonymous maps for chip power and EMIFs */
+ PIN_MAP_MUX_GROUP_HOG_DEFAULT("pinctrl-u300", NULL, "power"),
+ PIN_MAP_MUX_GROUP_HOG_DEFAULT("pinctrl-u300", NULL, "emif0"),
+ PIN_MAP_MUX_GROUP_HOG_DEFAULT("pinctrl-u300", NULL, "emif1"),
+ /* per-device maps for MMC/SD, SPI and UART */
+ PIN_MAP_MUX_GROUP_DEFAULT("mmci", "pinctrl-u300", NULL, "mmc0"),
+ PIN_MAP_MUX_GROUP_DEFAULT("pl022", "pinctrl-u300", NULL, "spi0"),
+ PIN_MAP_MUX_GROUP_DEFAULT("uart0", "pinctrl-u300", NULL, "uart0"),
+ /* This pin is used for clock return rather than GPIO */
+ PIN_MAP_CONFIGS_PIN_DEFAULT("mmci", "pinctrl-u300", "PIO APP GPIO 11",
+ pin_pullup_conf),
+ /* This pin is used for card detect */
+ PIN_MAP_CONFIGS_PIN_DEFAULT("mmci", "pinctrl-u300", "PIO MS INS",
+ pin_highz_conf),
+};
+
+struct db_chip {
+ u16 chipid;
+ const char *name;
+};
+
+/*
+ * This is a list of the Digital Baseband chips used in the U300 platform.
+ */
+static struct db_chip db_chips[] __initdata = {
+ {
+ .chipid = 0xb800,
+ .name = "DB3000",
+ },
+ {
+ .chipid = 0xc000,
+ .name = "DB3100",
+ },
+ {
+ .chipid = 0xc800,
+ .name = "DB3150",
+ },
+ {
+ .chipid = 0xd800,
+ .name = "DB3200",
+ },
+ {
+ .chipid = 0xe000,
+ .name = "DB3250",
+ },
+ {
+ .chipid = 0xe800,
+ .name = "DB3210",
+ },
+ {
+ .chipid = 0xf000,
+ .name = "DB3350 P1x",
+ },
+ {
+ .chipid = 0xf100,
+ .name = "DB3350 P2x",
+ },
+ {
+ .chipid = 0x0000, /* List terminator */
+ .name = NULL,
+ }
+};
+
+static void __init u300_init_check_chip(void)
+{
+
+ u16 val;
+ struct db_chip *chip;
+ const char *chipname;
+ const char unknown[] = "UNKNOWN";
+
+ /* Read out and print chip ID */
+ val = readw(syscon_base + U300_SYSCON_CIDR);
+ /* This is in funky bigendian order... */
+ val = (val & 0xFFU) << 8 | (val >> 8);
+ chip = db_chips;
+ chipname = unknown;
+
+ for ( ; chip->chipid; chip++) {
+ if (chip->chipid == (val & 0xFF00U)) {
+ chipname = chip->name;
+ break;
+ }
+ }
+ printk(KERN_INFO "Initializing U300 system on %s baseband chip " \
+ "(chip ID 0x%04x)\n", chipname, val);
+
+ if ((val & 0xFF00U) != 0xf000 && (val & 0xFF00U) != 0xf100) {
+ printk(KERN_ERR "Platform configured for BS335 " \
+ " with DB3350 but %s detected, expect problems!",
+ chipname);
+ }
+}
+
+/* Forward declare this function from the watchdog */
+void coh901327_watchdog_reset(void);
+
+static void u300_restart(enum reboot_mode mode, const char *cmd)
+{
+ switch (mode) {
+ case REBOOT_SOFT:
+ case REBOOT_HARD:
+#ifdef CONFIG_COH901327_WATCHDOG
+ coh901327_watchdog_reset();
+#endif
+ break;
+ default:
+ /* Do nothing */
+ break;
+ }
+ /* Wait for system do die/reset. */
+ while (1);
+}
+
+/* These are mostly to get the right device names for the clock lookups */
+static struct of_dev_auxdata u300_auxdata_lookup[] __initdata = {
+ OF_DEV_AUXDATA("stericsson,pinctrl-u300", U300_SYSCON_BASE,
+ "pinctrl-u300", NULL),
+ OF_DEV_AUXDATA("stericsson,gpio-coh901", U300_GPIO_BASE,
+ "u300-gpio", NULL),
+ OF_DEV_AUXDATA("stericsson,coh901327", U300_WDOG_BASE,
+ "coh901327_wdog", NULL),
+ OF_DEV_AUXDATA("stericsson,coh901331", U300_RTC_BASE,
+ "rtc-coh901331", NULL),
+ OF_DEV_AUXDATA("stericsson,coh901318", U300_DMAC_BASE,
+ "coh901318", NULL),
+ OF_DEV_AUXDATA("stericsson,fsmc-nand", U300_NAND_IF_PHYS_BASE,
+ "fsmc-nand", NULL),
+ OF_DEV_AUXDATA("arm,primecell", U300_UART0_BASE,
+ "uart0", NULL),
+ OF_DEV_AUXDATA("arm,primecell", U300_UART1_BASE,
+ "uart1", NULL),
+ OF_DEV_AUXDATA("arm,primecell", U300_SPI_BASE,
+ "pl022", NULL),
+ OF_DEV_AUXDATA("st,ddci2c", U300_I2C0_BASE,
+ "stu300.0", NULL),
+ OF_DEV_AUXDATA("st,ddci2c", U300_I2C1_BASE,
+ "stu300.1", NULL),
+ OF_DEV_AUXDATA("arm,primecell", U300_MMCSD_BASE,
+ "mmci", NULL),
+ { /* sentinel */ },
+};
+
+static void __init u300_init_irq_dt(void)
+{
+ struct device_node *syscon;
+ struct clk *clk;
+
+ syscon = of_find_node_by_path("/syscon@c0011000");
+ if (!syscon) {
+ pr_crit("could not find syscon node\n");
+ return;
+ }
+ syscon_base = of_iomap(syscon, 0);
+ if (!syscon_base) {
+ pr_crit("could not remap syscon\n");
+ return;
+ }
+ /* initialize clocking early, we want to clock the INTCON */
+ u300_clk_init(syscon_base);
+
+ /* Bootstrap EMIF and SEMI clocks */
+ clk = clk_get_sys("pl172", NULL);
+ BUG_ON(IS_ERR(clk));
+ clk_prepare_enable(clk);
+ clk = clk_get_sys("semi", NULL);
+ BUG_ON(IS_ERR(clk));
+ clk_prepare_enable(clk);
+
+ /* Clock the interrupt controller */
+ clk = clk_get_sys("intcon", NULL);
+ BUG_ON(IS_ERR(clk));
+ clk_prepare_enable(clk);
+
+ irqchip_init();
+}
+
+static void __init u300_init_machine_dt(void)
+{
+ u16 val;
+
+ /* Check what platform we run and print some status information */
+ u300_init_check_chip();
+
+ /* Initialize pinmuxing */
+ pinctrl_register_mappings(u300_pinmux_map,
+ ARRAY_SIZE(u300_pinmux_map));
+
+ of_platform_populate(NULL, of_default_bus_match_table,
+ u300_auxdata_lookup, NULL);
+
+ /* Enable SEMI self refresh */
+ val = readw(syscon_base + U300_SYSCON_SMCR) |
+ U300_SYSCON_SMCR_SEMI_SREFREQ_ENABLE;
+ writew(val, syscon_base + U300_SYSCON_SMCR);
+}
+
+static const char * u300_board_compat[] = {
+ "stericsson,u300",
+ NULL,
+};
+
+DT_MACHINE_START(U300_DT, "U300 S335/B335 (Device Tree)")
+ .map_io = u300_map_io,
+ .init_irq = u300_init_irq_dt,
+ .init_time = clocksource_of_init,
+ .init_machine = u300_init_machine_dt,
+ .restart = u300_restart,
+ .dt_compat = u300_board_compat,
+MACHINE_END
diff --git a/arch/arm/mach-u300/dummyspichip.c b/arch/arm/mach-u300/dummyspichip.c
new file mode 100644
index 000000000..131996805
--- /dev/null
+++ b/arch/arm/mach-u300/dummyspichip.c
@@ -0,0 +1,277 @@
+/*
+ * arch/arm/mach-u300/dummyspichip.c
+ *
+ * Copyright (C) 2007-2009 ST-Ericsson AB
+ * License terms: GNU General Public License (GPL) version 2
+ * This is a dummy loopback SPI "chip" used for testing SPI.
+ * Author: Linus Walleij <linus.walleij@stericsson.com>
+ */
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/device.h>
+#include <linux/err.h>
+#include <linux/sysfs.h>
+#include <linux/mutex.h>
+#include <linux/spi/spi.h>
+#include <linux/dma-mapping.h>
+#include <linux/slab.h>
+/*
+ * WARNING! Do not include this pl022-specific controller header
+ * for any generic driver. It is only done in this dummy chip
+ * because we alter the chip configuration in order to test some
+ * different settings on the loopback device. Normal chip configs
+ * shall be STATIC and not altered by the driver!
+ */
+#include <linux/amba/pl022.h>
+
+struct dummy {
+ struct device *dev;
+ struct mutex lock;
+};
+
+#define DMA_TEST_SIZE 2048
+
+/* When we cat /sys/bus/spi/devices/spi0.0/looptest this will be triggered */
+static ssize_t dummy_looptest(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct spi_device *spi = to_spi_device(dev);
+ struct dummy *p_dummy = dev_get_drvdata(&spi->dev);
+
+ /*
+ * WARNING! Do not dereference the chip-specific data in any normal
+ * driver for a chip. It is usually STATIC and shall not be read
+ * or written to. Your chip driver should NOT depend on fields in this
+ * struct, this is just used here to alter the behaviour of the chip
+ * in order to perform tests.
+ */
+ int status;
+ u8 txbuf[14] = {0xDE, 0xAD, 0xBE, 0xEF, 0x2B, 0xAD,
+ 0xCA, 0xFE, 0xBA, 0xBE, 0xB1, 0x05,
+ 0xF0, 0x0D};
+ u8 rxbuf[14];
+ u8 *bigtxbuf_virtual;
+ u8 *bigrxbuf_virtual;
+
+ if (mutex_lock_interruptible(&p_dummy->lock))
+ return -ERESTARTSYS;
+
+ bigtxbuf_virtual = kmalloc(DMA_TEST_SIZE, GFP_KERNEL);
+ if (bigtxbuf_virtual == NULL) {
+ status = -ENOMEM;
+ goto out;
+ }
+ bigrxbuf_virtual = kmalloc(DMA_TEST_SIZE, GFP_KERNEL);
+
+ /* Fill TXBUF with some happy pattern */
+ memset(bigtxbuf_virtual, 0xAA, DMA_TEST_SIZE);
+
+ /*
+ * Force chip to 8 bit mode
+ * WARNING: NEVER DO THIS IN REAL DRIVER CODE, THIS SHOULD BE STATIC!
+ */
+ spi->bits_per_word = 8;
+ /* You should NOT DO THIS EITHER */
+ spi->master->setup(spi);
+
+ /* Now run the tests for 8bit mode */
+ pr_info("Simple test 1: write 0xAA byte, read back garbage byte "
+ "in 8bit mode\n");
+ status = spi_w8r8(spi, 0xAA);
+ if (status < 0)
+ pr_warn("Simple test 1: FAILURE: spi_write_then_read failed with status %d\n",
+ status);
+ else
+ pr_info("Simple test 1: SUCCESS!\n");
+
+ pr_info("Simple test 2: write 8 bytes, read back 8 bytes garbage "
+ "in 8bit mode (full FIFO)\n");
+ status = spi_write_then_read(spi, &txbuf[0], 8, &rxbuf[0], 8);
+ if (status < 0)
+ pr_warn("Simple test 2: FAILURE: spi_write_then_read() failed with status %d\n",
+ status);
+ else
+ pr_info("Simple test 2: SUCCESS!\n");
+
+ pr_info("Simple test 3: write 14 bytes, read back 14 bytes garbage "
+ "in 8bit mode (see if we overflow FIFO)\n");
+ status = spi_write_then_read(spi, &txbuf[0], 14, &rxbuf[0], 14);
+ if (status < 0)
+ pr_warn("Simple test 3: FAILURE: failed with status %d (probably FIFO overrun)\n",
+ status);
+ else
+ pr_info("Simple test 3: SUCCESS!\n");
+
+ pr_info("Simple test 4: write 8 bytes with spi_write(), read 8 "
+ "bytes garbage with spi_read() in 8bit mode\n");
+ status = spi_write(spi, &txbuf[0], 8);
+ if (status < 0)
+ pr_warn("Simple test 4 step 1: FAILURE: spi_write() failed with status %d\n",
+ status);
+ else
+ pr_info("Simple test 4 step 1: SUCCESS!\n");
+ status = spi_read(spi, &rxbuf[0], 8);
+ if (status < 0)
+ pr_warn("Simple test 4 step 2: FAILURE: spi_read() failed with status %d\n",
+ status);
+ else
+ pr_info("Simple test 4 step 2: SUCCESS!\n");
+
+ pr_info("Simple test 5: write 14 bytes with spi_write(), read "
+ "14 bytes garbage with spi_read() in 8bit mode\n");
+ status = spi_write(spi, &txbuf[0], 14);
+ if (status < 0)
+ pr_warn("Simple test 5 step 1: FAILURE: spi_write() failed with status %d (probably FIFO overrun)\n",
+ status);
+ else
+ pr_info("Simple test 5 step 1: SUCCESS!\n");
+ status = spi_read(spi, &rxbuf[0], 14);
+ if (status < 0)
+ pr_warn("Simple test 5 step 2: FAILURE: spi_read() failed with status %d (probably FIFO overrun)\n",
+ status);
+ else
+ pr_info("Simple test 5: SUCCESS!\n");
+
+ pr_info("Simple test 6: write %d bytes with spi_write(), "
+ "read %d bytes garbage with spi_read() in 8bit mode\n",
+ DMA_TEST_SIZE, DMA_TEST_SIZE);
+ status = spi_write(spi, &bigtxbuf_virtual[0], DMA_TEST_SIZE);
+ if (status < 0)
+ pr_warn("Simple test 6 step 1: FAILURE: spi_write() failed with status %d (probably FIFO overrun)\n",
+ status);
+ else
+ pr_info("Simple test 6 step 1: SUCCESS!\n");
+ status = spi_read(spi, &bigrxbuf_virtual[0], DMA_TEST_SIZE);
+ if (status < 0)
+ pr_warn("Simple test 6 step 2: FAILURE: spi_read() failed with status %d (probably FIFO overrun)\n",
+ status);
+ else
+ pr_info("Simple test 6: SUCCESS!\n");
+
+
+ /*
+ * Force chip to 16 bit mode
+ * WARNING: NEVER DO THIS IN REAL DRIVER CODE, THIS SHOULD BE STATIC!
+ */
+ spi->bits_per_word = 16;
+ /* You should NOT DO THIS EITHER */
+ spi->master->setup(spi);
+
+ pr_info("Simple test 7: write 0xAA byte, read back garbage byte "
+ "in 16bit bus mode\n");
+ status = spi_w8r8(spi, 0xAA);
+ if (status == -EIO)
+ pr_info("Simple test 7: SUCCESS! (expected failure with "
+ "status EIO)\n");
+ else if (status < 0)
+ pr_warn("Simple test 7: FAILURE: spi_write_then_read failed with status %d\n",
+ status);
+ else
+ pr_warn("Simple test 7: FAILURE: spi_write_then_read succeeded but it was expected to fail!\n");
+
+ pr_info("Simple test 8: write 8 bytes, read back 8 bytes garbage "
+ "in 16bit mode (full FIFO)\n");
+ status = spi_write_then_read(spi, &txbuf[0], 8, &rxbuf[0], 8);
+ if (status < 0)
+ pr_warn("Simple test 8: FAILURE: spi_write_then_read() failed with status %d\n",
+ status);
+ else
+ pr_info("Simple test 8: SUCCESS!\n");
+
+ pr_info("Simple test 9: write 14 bytes, read back 14 bytes garbage "
+ "in 16bit mode (see if we overflow FIFO)\n");
+ status = spi_write_then_read(spi, &txbuf[0], 14, &rxbuf[0], 14);
+ if (status < 0)
+ pr_warn("Simple test 9: FAILURE: failed with status %d (probably FIFO overrun)\n",
+ status);
+ else
+ pr_info("Simple test 9: SUCCESS!\n");
+
+ pr_info("Simple test 10: write %d bytes with spi_write(), "
+ "read %d bytes garbage with spi_read() in 16bit mode\n",
+ DMA_TEST_SIZE, DMA_TEST_SIZE);
+ status = spi_write(spi, &bigtxbuf_virtual[0], DMA_TEST_SIZE);
+ if (status < 0)
+ pr_warn("Simple test 10 step 1: FAILURE: spi_write() failed with status %d (probably FIFO overrun)\n",
+ status);
+ else
+ pr_info("Simple test 10 step 1: SUCCESS!\n");
+
+ status = spi_read(spi, &bigrxbuf_virtual[0], DMA_TEST_SIZE);
+ if (status < 0)
+ pr_warn("Simple test 10 step 2: FAILURE: spi_read() failed with status %d (probably FIFO overrun)\n",
+ status);
+ else
+ pr_info("Simple test 10: SUCCESS!\n");
+
+ status = sprintf(buf, "loop test complete\n");
+ kfree(bigrxbuf_virtual);
+ kfree(bigtxbuf_virtual);
+ out:
+ mutex_unlock(&p_dummy->lock);
+ return status;
+}
+
+static DEVICE_ATTR(looptest, S_IRUGO, dummy_looptest, NULL);
+
+static int pl022_dummy_probe(struct spi_device *spi)
+{
+ struct dummy *p_dummy;
+ int status;
+
+ dev_info(&spi->dev, "probing dummy SPI device\n");
+
+ p_dummy = kzalloc(sizeof *p_dummy, GFP_KERNEL);
+ if (!p_dummy)
+ return -ENOMEM;
+
+ dev_set_drvdata(&spi->dev, p_dummy);
+ mutex_init(&p_dummy->lock);
+
+ /* sysfs hook */
+ status = device_create_file(&spi->dev, &dev_attr_looptest);
+ if (status) {
+ dev_dbg(&spi->dev, "device_create_file looptest failure.\n");
+ goto out_dev_create_looptest_failed;
+ }
+
+ return 0;
+
+out_dev_create_looptest_failed:
+ dev_set_drvdata(&spi->dev, NULL);
+ kfree(p_dummy);
+ return status;
+}
+
+static int pl022_dummy_remove(struct spi_device *spi)
+{
+ struct dummy *p_dummy = dev_get_drvdata(&spi->dev);
+
+ dev_info(&spi->dev, "removing dummy SPI device\n");
+ device_remove_file(&spi->dev, &dev_attr_looptest);
+ dev_set_drvdata(&spi->dev, NULL);
+ kfree(p_dummy);
+
+ return 0;
+}
+
+static const struct of_device_id pl022_dummy_dt_match[] = {
+ { .compatible = "arm,pl022-dummy" },
+ {},
+};
+
+static struct spi_driver pl022_dummy_driver = {
+ .driver = {
+ .name = "spi-dummy",
+ .owner = THIS_MODULE,
+ .of_match_table = pl022_dummy_dt_match,
+ },
+ .probe = pl022_dummy_probe,
+ .remove = pl022_dummy_remove,
+};
+
+module_spi_driver(pl022_dummy_driver);
+MODULE_AUTHOR("Linus Walleij <linus.walleij@stericsson.com>");
+MODULE_DESCRIPTION("PL022 SSP/SPI DUMMY Linux driver");
+MODULE_LICENSE("GPL");
diff --git a/arch/arm/mach-u300/regulator.c b/arch/arm/mach-u300/regulator.c
new file mode 100644
index 000000000..595b574c2
--- /dev/null
+++ b/arch/arm/mach-u300/regulator.c
@@ -0,0 +1,132 @@
+/*
+ * arch/arm/mach-u300/regulator.c
+ *
+ * Copyright (C) 2009 ST-Ericsson AB
+ * License terms: GNU General Public License (GPL) version 2
+ * Handle board-bound regulators and board power not related
+ * to any devices.
+ * Author: Linus Walleij <linus.walleij@stericsson.com>
+ */
+#include <linux/device.h>
+#include <linux/signal.h>
+#include <linux/err.h>
+#include <linux/of.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/regulator/machine.h>
+#include <linux/regulator/consumer.h>
+#include <linux/mfd/syscon.h>
+#include <linux/regmap.h>
+
+/* Power Management Control 16bit (R/W) */
+#define U300_SYSCON_PMCR (0x50)
+#define U300_SYSCON_PMCR_DCON_ENABLE (0x0002)
+#define U300_SYSCON_PMCR_PWR_MGNT_ENABLE (0x0001)
+
+/*
+ * Regulators that power the board and chip and which are
+ * not copuled to specific drivers are hogged in these
+ * instances.
+ */
+static struct regulator *main_power_15;
+
+/*
+ * This function is used from pm.h to shut down the system by
+ * resetting all regulators in turn and then disable regulator
+ * LDO D (main power).
+ */
+void u300_pm_poweroff(void)
+{
+ sigset_t old, all;
+
+ sigfillset(&all);
+ if (!sigprocmask(SIG_BLOCK, &all, &old)) {
+ /* Disable LDO D to shut down the system */
+ if (main_power_15)
+ regulator_disable(main_power_15);
+ else
+ pr_err("regulator not available to shut down system\n");
+ (void) sigprocmask(SIG_SETMASK, &old, NULL);
+ }
+ return;
+}
+
+/*
+ * Hog the regulators needed to power up the board.
+ */
+static int __init __u300_init_boardpower(struct platform_device *pdev)
+{
+ struct device_node *np = pdev->dev.of_node;
+ struct device_node *syscon_np;
+ struct regmap *regmap;
+ int err;
+
+ pr_info("U300: setting up board power\n");
+
+ syscon_np = of_parse_phandle(np, "syscon", 0);
+ if (!syscon_np) {
+ pr_crit("U300: no syscon node\n");
+ return -ENODEV;
+ }
+ regmap = syscon_node_to_regmap(syscon_np);
+ if (IS_ERR(regmap)) {
+ pr_crit("U300: could not locate syscon regmap\n");
+ return PTR_ERR(regmap);
+ }
+
+ main_power_15 = regulator_get(&pdev->dev, "vana15");
+
+ if (IS_ERR(main_power_15)) {
+ pr_err("could not get vana15");
+ return PTR_ERR(main_power_15);
+ }
+ err = regulator_enable(main_power_15);
+ if (err) {
+ pr_err("could not enable vana15\n");
+ return err;
+ }
+
+ /*
+ * On U300 a special system controller register pulls up the DC
+ * until the vana15 (LDO D) regulator comes up. At this point, all
+ * regulators are set and we do not need power control via
+ * DC ON anymore. This function will likely be moved whenever
+ * the rest of the U300 power management is implemented.
+ */
+ pr_info("U300: disable system controller pull-up\n");
+ regmap_update_bits(regmap, U300_SYSCON_PMCR,
+ U300_SYSCON_PMCR_DCON_ENABLE, 0);
+
+ /* Register globally exported PM poweroff hook */
+ pm_power_off = u300_pm_poweroff;
+
+ return 0;
+}
+
+static int __init s365_board_probe(struct platform_device *pdev)
+{
+ return __u300_init_boardpower(pdev);
+}
+
+static const struct of_device_id s365_board_match[] = {
+ { .compatible = "stericsson,s365" },
+ {},
+};
+
+static struct platform_driver s365_board_driver = {
+ .driver = {
+ .name = "s365-board",
+ .of_match_table = s365_board_match,
+ },
+};
+
+/*
+ * So at module init time we hog the regulator!
+ */
+static int __init u300_init_boardpower(void)
+{
+ return platform_driver_probe(&s365_board_driver,
+ s365_board_probe);
+}
+
+device_initcall(u300_init_boardpower);