diff options
Diffstat (limited to 'arch/arm/mach-ux500/cpu-db8500.c')
| -rw-r--r-- | arch/arm/mach-ux500/cpu-db8500.c | 212 |
1 files changed, 212 insertions, 0 deletions
diff --git a/arch/arm/mach-ux500/cpu-db8500.c b/arch/arm/mach-ux500/cpu-db8500.c new file mode 100644 index 000000000..6f63954c8 --- /dev/null +++ b/arch/arm/mach-ux500/cpu-db8500.c @@ -0,0 +1,212 @@ +/* + * Copyright (C) 2008-2009 ST-Ericsson SA + * + * Author: Srinidhi KASAGAR <srinidhi.kasagar@stericsson.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2, as + * published by the Free Software Foundation. + * + */ +#include <linux/types.h> +#include <linux/init.h> +#include <linux/device.h> +#include <linux/amba/bus.h> +#include <linux/interrupt.h> +#include <linux/irq.h> +#include <linux/platform_device.h> +#include <linux/io.h> +#include <linux/mfd/abx500/ab8500.h> +#include <linux/mfd/dbx500-prcmu.h> +#include <linux/of.h> +#include <linux/of_platform.h> +#include <linux/regulator/machine.h> +#include <linux/random.h> + +#include <asm/pmu.h> +#include <asm/mach/map.h> + +#include "setup.h" + +#include "board-mop500-regulators.h" +#include "board-mop500.h" +#include "db8500-regs.h" +#include "id.h" + +static struct ab8500_platform_data ab8500_platdata = { + .regulator = &ab8500_regulator_plat_data, +}; + +static struct prcmu_pdata db8500_prcmu_pdata = { + .ab_platdata = &ab8500_platdata, + .version_offset = DB8500_PRCMU_FW_VERSION_OFFSET, + .legacy_offset = DB8500_PRCMU_LEGACY_OFFSET, +}; + +/* minimum static i/o mapping required to boot U8500 platforms */ +static struct map_desc u8500_uart_io_desc[] __initdata = { + __IO_DEV_DESC(U8500_UART0_BASE, SZ_4K), + __IO_DEV_DESC(U8500_UART2_BASE, SZ_4K), +}; +/* U8500 and U9540 common io_desc */ +static struct map_desc u8500_common_io_desc[] __initdata = { + /* SCU base also covers GIC CPU BASE and TWD with its 4K page */ + __IO_DEV_DESC(U8500_SCU_BASE, SZ_4K), + __IO_DEV_DESC(U8500_GIC_DIST_BASE, SZ_4K), + __IO_DEV_DESC(U8500_L2CC_BASE, SZ_4K), + __IO_DEV_DESC(U8500_MTU0_BASE, SZ_4K), + __IO_DEV_DESC(U8500_BACKUPRAM0_BASE, SZ_8K), + + __IO_DEV_DESC(U8500_CLKRST1_BASE, SZ_4K), + __IO_DEV_DESC(U8500_CLKRST2_BASE, SZ_4K), + __IO_DEV_DESC(U8500_CLKRST3_BASE, SZ_4K), + __IO_DEV_DESC(U8500_CLKRST5_BASE, SZ_4K), + __IO_DEV_DESC(U8500_CLKRST6_BASE, SZ_4K), + + __IO_DEV_DESC(U8500_GPIO0_BASE, SZ_4K), + __IO_DEV_DESC(U8500_GPIO1_BASE, SZ_4K), + __IO_DEV_DESC(U8500_GPIO2_BASE, SZ_4K), + __IO_DEV_DESC(U8500_GPIO3_BASE, SZ_4K), +}; + +/* U8500 IO map specific description */ +static struct map_desc u8500_io_desc[] __initdata = { + __IO_DEV_DESC(U8500_PRCMU_BASE, SZ_4K), + __IO_DEV_DESC(U8500_PRCMU_TCDM_BASE, SZ_4K), + +}; + +/* U9540 IO map specific description */ +static struct map_desc u9540_io_desc[] __initdata = { + __IO_DEV_DESC(U8500_PRCMU_BASE, SZ_4K + SZ_8K), + __IO_DEV_DESC(U8500_PRCMU_TCDM_BASE, SZ_4K + SZ_8K), +}; + +static void __init u8500_map_io(void) +{ + /* + * Map the UARTs early so that the DEBUG_LL stuff continues to work. + */ + iotable_init(u8500_uart_io_desc, ARRAY_SIZE(u8500_uart_io_desc)); + + ux500_map_io(); + + iotable_init(u8500_common_io_desc, ARRAY_SIZE(u8500_common_io_desc)); + + if (cpu_is_ux540_family()) + iotable_init(u9540_io_desc, ARRAY_SIZE(u9540_io_desc)); + else + iotable_init(u8500_io_desc, ARRAY_SIZE(u8500_io_desc)); +} + +/* + * The PMU IRQ lines of two cores are wired together into a single interrupt. + * Bounce the interrupt to the other core if it's not ours. + */ +static irqreturn_t db8500_pmu_handler(int irq, void *dev, irq_handler_t handler) +{ + irqreturn_t ret = handler(irq, dev); + int other = !smp_processor_id(); + + if (ret == IRQ_NONE && cpu_online(other)) + irq_set_affinity(irq, cpumask_of(other)); + + /* + * We should be able to get away with the amount of IRQ_NONEs we give, + * while still having the spurious IRQ detection code kick in if the + * interrupt really starts hitting spuriously. + */ + return ret; +} + +static struct arm_pmu_platdata db8500_pmu_platdata = { + .handle_irq = db8500_pmu_handler, +}; + +static const char *db8500_read_soc_id(void) +{ + void __iomem *uid = __io_address(U8500_BB_UID_BASE); + + /* Throw these device-specific numbers into the entropy pool */ + add_device_randomness(uid, 0x14); + return kasprintf(GFP_KERNEL, "%08x%08x%08x%08x%08x", + readl((u32 *)uid+0), + readl((u32 *)uid+1), readl((u32 *)uid+2), + readl((u32 *)uid+3), readl((u32 *)uid+4)); +} + +static struct device * __init db8500_soc_device_init(void) +{ + const char *soc_id = db8500_read_soc_id(); + + return ux500_soc_device_init(soc_id); +} + +static struct of_dev_auxdata u8500_auxdata_lookup[] __initdata = { + /* Requires call-back bindings. */ + OF_DEV_AUXDATA("arm,cortex-a9-pmu", 0, "arm-pmu", &db8500_pmu_platdata), + /* Requires DMA bindings. */ + OF_DEV_AUXDATA("stericsson,ux500-msp-i2s", 0x80123000, + "ux500-msp-i2s.0", &msp0_platform_data), + OF_DEV_AUXDATA("stericsson,ux500-msp-i2s", 0x80124000, + "ux500-msp-i2s.1", &msp1_platform_data), + OF_DEV_AUXDATA("stericsson,ux500-msp-i2s", 0x80117000, + "ux500-msp-i2s.2", &msp2_platform_data), + OF_DEV_AUXDATA("stericsson,ux500-msp-i2s", 0x80125000, + "ux500-msp-i2s.3", &msp3_platform_data), + /* Requires non-DT:able platform data. */ + OF_DEV_AUXDATA("stericsson,db8500-prcmu", 0x80157000, "db8500-prcmu", + &db8500_prcmu_pdata), + OF_DEV_AUXDATA("stericsson,ux500-cryp", 0xa03cb000, "cryp1", NULL), + OF_DEV_AUXDATA("stericsson,ux500-hash", 0xa03c2000, "hash1", NULL), + OF_DEV_AUXDATA("stericsson,snd-soc-mop500", 0, "snd-soc-mop500.0", + NULL), + {}, +}; + +static struct of_dev_auxdata u8540_auxdata_lookup[] __initdata = { + OF_DEV_AUXDATA("stericsson,db8500-prcmu", 0x80157000, "db8500-prcmu", + &db8500_prcmu_pdata), + {}, +}; + +static const struct of_device_id u8500_local_bus_nodes[] = { + /* only create devices below soc node */ + { .compatible = "stericsson,db8500", }, + { .compatible = "stericsson,db8500-prcmu", }, + { .compatible = "simple-bus"}, + { }, +}; + +static void __init u8500_init_machine(void) +{ + struct device *parent = db8500_soc_device_init(); + + /* automatically probe child nodes of dbx5x0 devices */ + if (of_machine_is_compatible("st-ericsson,u8540")) + of_platform_populate(NULL, u8500_local_bus_nodes, + u8540_auxdata_lookup, parent); + else + of_platform_populate(NULL, u8500_local_bus_nodes, + u8500_auxdata_lookup, parent); +} + +static const char * stericsson_dt_platform_compat[] = { + "st-ericsson,u8500", + "st-ericsson,u8540", + "st-ericsson,u9500", + "st-ericsson,u9540", + NULL, +}; + +DT_MACHINE_START(U8500_DT, "ST-Ericsson Ux5x0 platform (Device Tree Support)") + .smp = smp_ops(ux500_smp_ops), + .map_io = u8500_map_io, + .init_irq = ux500_init_irq, + /* we re-use nomadik timer here */ + .init_time = ux500_timer_init, + .init_machine = u8500_init_machine, + .init_late = NULL, + .dt_compat = stericsson_dt_platform_compat, + .restart = ux500_restart, +MACHINE_END |