diff options
Diffstat (limited to 'arch/arm/mach-ux500/platsmp.c')
| -rw-r--r-- | arch/arm/mach-ux500/platsmp.c | 132 |
1 files changed, 39 insertions, 93 deletions
diff --git a/arch/arm/mach-ux500/platsmp.c b/arch/arm/mach-ux500/platsmp.c index 62b1de922..70766b963 100644 --- a/arch/arm/mach-ux500/platsmp.c +++ b/arch/arm/mach-ux500/platsmp.c @@ -28,135 +28,81 @@ #include "db8500-regs.h" #include "id.h" -static void __iomem *scu_base; -static void __iomem *backupram; - -/* This is called from headsmp.S to wakeup the secondary core */ -extern void u8500_secondary_startup(void); - -/* - * Write pen_release in a way that is guaranteed to be visible to all - * observers, irrespective of whether they're taking part in coherency - * or not. This is necessary for the hotplug code to work reliably. - */ -static void write_pen_release(int val) -{ - pen_release = val; - smp_wmb(); - sync_cache_w(&pen_release); -} - -static DEFINE_SPINLOCK(boot_lock); - -static void ux500_secondary_init(unsigned int cpu) -{ - /* - * let the primary processor know we're out of the - * pen, then head off into the C entry point - */ - write_pen_release(-1); - - /* - * Synchronise with the boot thread. - */ - spin_lock(&boot_lock); - spin_unlock(&boot_lock); -} +/* Magic triggers in backup RAM */ +#define UX500_CPU1_JUMPADDR_OFFSET 0x1FF4 +#define UX500_CPU1_WAKEMAGIC_OFFSET 0x1FF0 -static int ux500_boot_secondary(unsigned int cpu, struct task_struct *idle) +static void wakeup_secondary(void) { - unsigned long timeout; - - /* - * set synchronisation state between this boot processor - * and the secondary one - */ - spin_lock(&boot_lock); - - /* - * The secondary processor is waiting to be released from - * the holding pen - release it, then wait for it to flag - * that it has been released by resetting pen_release. - */ - write_pen_release(cpu_logical_map(cpu)); - - arch_send_wakeup_ipi_mask(cpumask_of(cpu)); + struct device_node *np; + static void __iomem *backupram; - timeout = jiffies + (1 * HZ); - while (time_before(jiffies, timeout)) { - if (pen_release == -1) - break; + np = of_find_compatible_node(NULL, NULL, "ste,dbx500-backupram"); + if (!np) { + pr_err("No backupram base address\n"); + return; + } + backupram = of_iomap(np, 0); + of_node_put(np); + if (!backupram) { + pr_err("No backupram remap\n"); + return; } /* - * now the secondary core is starting up let it run its - * calibrations, then wait for it to finish - */ - spin_unlock(&boot_lock); - - return pen_release != -1 ? -ENOSYS : 0; -} - -static void __init wakeup_secondary(void) -{ - /* * write the address of secondary startup into the backup ram register * at offset 0x1FF4, then write the magic number 0xA1FEED01 to the * backup ram register at offset 0x1FF0, which is what boot rom code - * is waiting for. This would wake up the secondary core from WFE + * is waiting for. This will wake up the secondary core from WFE. */ -#define UX500_CPU1_JUMPADDR_OFFSET 0x1FF4 - __raw_writel(virt_to_phys(u8500_secondary_startup), - backupram + UX500_CPU1_JUMPADDR_OFFSET); - -#define UX500_CPU1_WAKEMAGIC_OFFSET 0x1FF0 - __raw_writel(0xA1FEED01, - backupram + UX500_CPU1_WAKEMAGIC_OFFSET); + writel(virt_to_phys(secondary_startup), + backupram + UX500_CPU1_JUMPADDR_OFFSET); + writel(0xA1FEED01, + backupram + UX500_CPU1_WAKEMAGIC_OFFSET); /* make sure write buffer is drained */ mb(); + iounmap(backupram); } -/* - * Initialise the CPU possible map early - this describes the CPUs - * which may be present or become present in the system. - */ -static void __init ux500_smp_init_cpus(void) +static void __init ux500_smp_prepare_cpus(unsigned int max_cpus) { - unsigned int i, ncores; struct device_node *np; + static void __iomem *scu_base; + unsigned int ncores; + int i; np = of_find_compatible_node(NULL, NULL, "arm,cortex-a9-scu"); + if (!np) { + pr_err("No SCU base address\n"); + return; + } scu_base = of_iomap(np, 0); of_node_put(np); - if (!scu_base) + if (!scu_base) { + pr_err("No SCU remap\n"); return; - backupram = ioremap(U8500_BACKUPRAM0_BASE, SZ_8K); - ncores = scu_get_core_count(scu_base); - - /* sanity check */ - if (ncores > nr_cpu_ids) { - pr_warn("SMP: %u cores greater than maximum (%u), clipping\n", - ncores, nr_cpu_ids); - ncores = nr_cpu_ids; } + scu_enable(scu_base); + ncores = scu_get_core_count(scu_base); for (i = 0; i < ncores; i++) set_cpu_possible(i, true); + iounmap(scu_base); } -static void __init ux500_smp_prepare_cpus(unsigned int max_cpus) +static int ux500_boot_secondary(unsigned int cpu, struct task_struct *idle) { - scu_enable(scu_base); wakeup_secondary(); + arch_send_wakeup_ipi_mask(cpumask_of(cpu)); + return 0; } struct smp_operations ux500_smp_ops __initdata = { - .smp_init_cpus = ux500_smp_init_cpus, .smp_prepare_cpus = ux500_smp_prepare_cpus, - .smp_secondary_init = ux500_secondary_init, .smp_boot_secondary = ux500_boot_secondary, #ifdef CONFIG_HOTPLUG_CPU .cpu_die = ux500_cpu_die, #endif }; +CPU_METHOD_OF_DECLARE(ux500_smp, "ste,dbx500-smp", &ux500_smp_ops); |