diff options
Diffstat (limited to 'arch/arm/mm/cache-v7.S')
| -rw-r--r-- | arch/arm/mm/cache-v7.S | 448 |
1 files changed, 448 insertions, 0 deletions
diff --git a/arch/arm/mm/cache-v7.S b/arch/arm/mm/cache-v7.S new file mode 100644 index 000000000..a134d8a13 --- /dev/null +++ b/arch/arm/mm/cache-v7.S @@ -0,0 +1,448 @@ +/* + * linux/arch/arm/mm/cache-v7.S + * + * Copyright (C) 2001 Deep Blue Solutions Ltd. + * Copyright (C) 2005 ARM Ltd. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This is the "shell" of the ARMv7 processor support. + */ +#include <linux/linkage.h> +#include <linux/init.h> +#include <asm/assembler.h> +#include <asm/errno.h> +#include <asm/unwind.h> + +#include "proc-macros.S" + +/* + * The secondary kernel init calls v7_flush_dcache_all before it enables + * the L1; however, the L1 comes out of reset in an undefined state, so + * the clean + invalidate performed by v7_flush_dcache_all causes a bunch + * of cache lines with uninitialized data and uninitialized tags to get + * written out to memory, which does really unpleasant things to the main + * processor. We fix this by performing an invalidate, rather than a + * clean + invalidate, before jumping into the kernel. + * + * This function is cloned from arch/arm/mach-tegra/headsmp.S, and needs + * to be called for both secondary cores startup and primary core resume + * procedures. + */ +ENTRY(v7_invalidate_l1) + mov r0, #0 + mcr p15, 2, r0, c0, c0, 0 + mrc p15, 1, r0, c0, c0, 0 + + movw r1, #0x7fff + and r2, r1, r0, lsr #13 + + movw r1, #0x3ff + + and r3, r1, r0, lsr #3 @ NumWays - 1 + add r2, r2, #1 @ NumSets + + and r0, r0, #0x7 + add r0, r0, #4 @ SetShift + + clz r1, r3 @ WayShift + add r4, r3, #1 @ NumWays +1: sub r2, r2, #1 @ NumSets-- + mov r3, r4 @ Temp = NumWays +2: subs r3, r3, #1 @ Temp-- + mov r5, r3, lsl r1 + mov r6, r2, lsl r0 + orr r5, r5, r6 @ Reg = (Temp<<WayShift)|(NumSets<<SetShift) + mcr p15, 0, r5, c7, c6, 2 + bgt 2b + cmp r2, #0 + bgt 1b + dsb st + isb + ret lr +ENDPROC(v7_invalidate_l1) + +/* + * v7_flush_icache_all() + * + * Flush the whole I-cache. + * + * Registers: + * r0 - set to 0 + */ +ENTRY(v7_flush_icache_all) + mov r0, #0 + ALT_SMP(mcr p15, 0, r0, c7, c1, 0) @ invalidate I-cache inner shareable + ALT_UP(mcr p15, 0, r0, c7, c5, 0) @ I+BTB cache invalidate + ret lr +ENDPROC(v7_flush_icache_all) + + /* + * v7_flush_dcache_louis() + * + * Flush the D-cache up to the Level of Unification Inner Shareable + * + * Corrupted registers: r0-r7, r9-r11 (r6 only in Thumb mode) + */ + +ENTRY(v7_flush_dcache_louis) + dmb @ ensure ordering with previous memory accesses + mrc p15, 1, r0, c0, c0, 1 @ read clidr, r0 = clidr +ALT_SMP(mov r3, r0, lsr #20) @ move LoUIS into position +ALT_UP( mov r3, r0, lsr #26) @ move LoUU into position + ands r3, r3, #7 << 1 @ extract LoU*2 field from clidr + bne start_flush_levels @ LoU != 0, start flushing +#ifdef CONFIG_ARM_ERRATA_643719 +ALT_SMP(mrc p15, 0, r2, c0, c0, 0) @ read main ID register +ALT_UP( ret lr) @ LoUU is zero, so nothing to do + movw r1, #:lower16:(0x410fc090 >> 4) @ ID of ARM Cortex A9 r0p? + movt r1, #:upper16:(0x410fc090 >> 4) + teq r1, r2, lsr #4 @ test for errata affected core and if so... + moveq r3, #1 << 1 @ fix LoUIS value + beq start_flush_levels @ start flushing cache levels +#endif + ret lr +ENDPROC(v7_flush_dcache_louis) + +/* + * v7_flush_dcache_all() + * + * Flush the whole D-cache. + * + * Corrupted registers: r0-r7, r9-r11 (r6 only in Thumb mode) + * + * - mm - mm_struct describing address space + */ +ENTRY(v7_flush_dcache_all) + dmb @ ensure ordering with previous memory accesses + mrc p15, 1, r0, c0, c0, 1 @ read clidr + mov r3, r0, lsr #23 @ move LoC into position + ands r3, r3, #7 << 1 @ extract LoC*2 from clidr + beq finished @ if loc is 0, then no need to clean +start_flush_levels: + mov r10, #0 @ start clean at cache level 0 +flush_levels: + add r2, r10, r10, lsr #1 @ work out 3x current cache level + mov r1, r0, lsr r2 @ extract cache type bits from clidr + and r1, r1, #7 @ mask of the bits for current cache only + cmp r1, #2 @ see what cache we have at this level + blt skip @ skip if no cache, or just i-cache +#ifdef CONFIG_PREEMPT + save_and_disable_irqs_notrace r9 @ make cssr&csidr read atomic +#endif + mcr p15, 2, r10, c0, c0, 0 @ select current cache level in cssr + isb @ isb to sych the new cssr&csidr + mrc p15, 1, r1, c0, c0, 0 @ read the new csidr +#ifdef CONFIG_PREEMPT + restore_irqs_notrace r9 +#endif + and r2, r1, #7 @ extract the length of the cache lines + add r2, r2, #4 @ add 4 (line length offset) + movw r4, #0x3ff + ands r4, r4, r1, lsr #3 @ find maximum number on the way size + clz r5, r4 @ find bit position of way size increment + movw r7, #0x7fff + ands r7, r7, r1, lsr #13 @ extract max number of the index size +loop1: + mov r9, r7 @ create working copy of max index +loop2: + ARM( orr r11, r10, r4, lsl r5 ) @ factor way and cache number into r11 + THUMB( lsl r6, r4, r5 ) + THUMB( orr r11, r10, r6 ) @ factor way and cache number into r11 + ARM( orr r11, r11, r9, lsl r2 ) @ factor index number into r11 + THUMB( lsl r6, r9, r2 ) + THUMB( orr r11, r11, r6 ) @ factor index number into r11 + mcr p15, 0, r11, c7, c14, 2 @ clean & invalidate by set/way + subs r9, r9, #1 @ decrement the index + bge loop2 + subs r4, r4, #1 @ decrement the way + bge loop1 +skip: + add r10, r10, #2 @ increment cache number + cmp r3, r10 + bgt flush_levels +finished: + mov r10, #0 @ swith back to cache level 0 + mcr p15, 2, r10, c0, c0, 0 @ select current cache level in cssr + dsb st + isb + ret lr +ENDPROC(v7_flush_dcache_all) + +/* + * v7_flush_cache_all() + * + * Flush the entire cache system. + * The data cache flush is now achieved using atomic clean / invalidates + * working outwards from L1 cache. This is done using Set/Way based cache + * maintenance instructions. + * The instruction cache can still be invalidated back to the point of + * unification in a single instruction. + * + */ +ENTRY(v7_flush_kern_cache_all) + ARM( stmfd sp!, {r4-r5, r7, r9-r11, lr} ) + THUMB( stmfd sp!, {r4-r7, r9-r11, lr} ) + bl v7_flush_dcache_all + mov r0, #0 + ALT_SMP(mcr p15, 0, r0, c7, c1, 0) @ invalidate I-cache inner shareable + ALT_UP(mcr p15, 0, r0, c7, c5, 0) @ I+BTB cache invalidate + ARM( ldmfd sp!, {r4-r5, r7, r9-r11, lr} ) + THUMB( ldmfd sp!, {r4-r7, r9-r11, lr} ) + ret lr +ENDPROC(v7_flush_kern_cache_all) + + /* + * v7_flush_kern_cache_louis(void) + * + * Flush the data cache up to Level of Unification Inner Shareable. + * Invalidate the I-cache to the point of unification. + */ +ENTRY(v7_flush_kern_cache_louis) + ARM( stmfd sp!, {r4-r5, r7, r9-r11, lr} ) + THUMB( stmfd sp!, {r4-r7, r9-r11, lr} ) + bl v7_flush_dcache_louis + mov r0, #0 + ALT_SMP(mcr p15, 0, r0, c7, c1, 0) @ invalidate I-cache inner shareable + ALT_UP(mcr p15, 0, r0, c7, c5, 0) @ I+BTB cache invalidate + ARM( ldmfd sp!, {r4-r5, r7, r9-r11, lr} ) + THUMB( ldmfd sp!, {r4-r7, r9-r11, lr} ) + ret lr +ENDPROC(v7_flush_kern_cache_louis) + +/* + * v7_flush_cache_all() + * + * Flush all TLB entries in a particular address space + * + * - mm - mm_struct describing address space + */ +ENTRY(v7_flush_user_cache_all) + /*FALLTHROUGH*/ + +/* + * v7_flush_cache_range(start, end, flags) + * + * Flush a range of TLB entries in the specified address space. + * + * - start - start address (may not be aligned) + * - end - end address (exclusive, may not be aligned) + * - flags - vm_area_struct flags describing address space + * + * It is assumed that: + * - we have a VIPT cache. + */ +ENTRY(v7_flush_user_cache_range) + ret lr +ENDPROC(v7_flush_user_cache_all) +ENDPROC(v7_flush_user_cache_range) + +/* + * v7_coherent_kern_range(start,end) + * + * Ensure that the I and D caches are coherent within specified + * region. This is typically used when code has been written to + * a memory region, and will be executed. + * + * - start - virtual start address of region + * - end - virtual end address of region + * + * It is assumed that: + * - the Icache does not read data from the write buffer + */ +ENTRY(v7_coherent_kern_range) + /* FALLTHROUGH */ + +/* + * v7_coherent_user_range(start,end) + * + * Ensure that the I and D caches are coherent within specified + * region. This is typically used when code has been written to + * a memory region, and will be executed. + * + * - start - virtual start address of region + * - end - virtual end address of region + * + * It is assumed that: + * - the Icache does not read data from the write buffer + */ +ENTRY(v7_coherent_user_range) + UNWIND(.fnstart ) + dcache_line_size r2, r3 + sub r3, r2, #1 + bic r12, r0, r3 +#ifdef CONFIG_ARM_ERRATA_764369 + ALT_SMP(W(dsb)) + ALT_UP(W(nop)) +#endif +1: + USER( mcr p15, 0, r12, c7, c11, 1 ) @ clean D line to the point of unification + add r12, r12, r2 + cmp r12, r1 + blo 1b + dsb ishst + icache_line_size r2, r3 + sub r3, r2, #1 + bic r12, r0, r3 +2: + USER( mcr p15, 0, r12, c7, c5, 1 ) @ invalidate I line + add r12, r12, r2 + cmp r12, r1 + blo 2b + mov r0, #0 + ALT_SMP(mcr p15, 0, r0, c7, c1, 6) @ invalidate BTB Inner Shareable + ALT_UP(mcr p15, 0, r0, c7, c5, 6) @ invalidate BTB + dsb ishst + isb + ret lr + +/* + * Fault handling for the cache operation above. If the virtual address in r0 + * isn't mapped, fail with -EFAULT. + */ +9001: +#ifdef CONFIG_ARM_ERRATA_775420 + dsb +#endif + mov r0, #-EFAULT + ret lr + UNWIND(.fnend ) +ENDPROC(v7_coherent_kern_range) +ENDPROC(v7_coherent_user_range) + +/* + * v7_flush_kern_dcache_area(void *addr, size_t size) + * + * Ensure that the data held in the page kaddr is written back + * to the page in question. + * + * - addr - kernel address + * - size - region size + */ +ENTRY(v7_flush_kern_dcache_area) + dcache_line_size r2, r3 + add r1, r0, r1 + sub r3, r2, #1 + bic r0, r0, r3 +#ifdef CONFIG_ARM_ERRATA_764369 + ALT_SMP(W(dsb)) + ALT_UP(W(nop)) +#endif +1: + mcr p15, 0, r0, c7, c14, 1 @ clean & invalidate D line / unified line + add r0, r0, r2 + cmp r0, r1 + blo 1b + dsb st + ret lr +ENDPROC(v7_flush_kern_dcache_area) + +/* + * v7_dma_inv_range(start,end) + * + * Invalidate the data cache within the specified region; we will + * be performing a DMA operation in this region and we want to + * purge old data in the cache. + * + * - start - virtual start address of region + * - end - virtual end address of region + */ +v7_dma_inv_range: + dcache_line_size r2, r3 + sub r3, r2, #1 + tst r0, r3 + bic r0, r0, r3 +#ifdef CONFIG_ARM_ERRATA_764369 + ALT_SMP(W(dsb)) + ALT_UP(W(nop)) +#endif + mcrne p15, 0, r0, c7, c14, 1 @ clean & invalidate D / U line + + tst r1, r3 + bic r1, r1, r3 + mcrne p15, 0, r1, c7, c14, 1 @ clean & invalidate D / U line +1: + mcr p15, 0, r0, c7, c6, 1 @ invalidate D / U line + add r0, r0, r2 + cmp r0, r1 + blo 1b + dsb st + ret lr +ENDPROC(v7_dma_inv_range) + +/* + * v7_dma_clean_range(start,end) + * - start - virtual start address of region + * - end - virtual end address of region + */ +v7_dma_clean_range: + dcache_line_size r2, r3 + sub r3, r2, #1 + bic r0, r0, r3 +#ifdef CONFIG_ARM_ERRATA_764369 + ALT_SMP(W(dsb)) + ALT_UP(W(nop)) +#endif +1: + mcr p15, 0, r0, c7, c10, 1 @ clean D / U line + add r0, r0, r2 + cmp r0, r1 + blo 1b + dsb st + ret lr +ENDPROC(v7_dma_clean_range) + +/* + * v7_dma_flush_range(start,end) + * - start - virtual start address of region + * - end - virtual end address of region + */ +ENTRY(v7_dma_flush_range) + dcache_line_size r2, r3 + sub r3, r2, #1 + bic r0, r0, r3 +#ifdef CONFIG_ARM_ERRATA_764369 + ALT_SMP(W(dsb)) + ALT_UP(W(nop)) +#endif +1: + mcr p15, 0, r0, c7, c14, 1 @ clean & invalidate D / U line + add r0, r0, r2 + cmp r0, r1 + blo 1b + dsb st + ret lr +ENDPROC(v7_dma_flush_range) + +/* + * dma_map_area(start, size, dir) + * - start - kernel virtual start address + * - size - size of region + * - dir - DMA direction + */ +ENTRY(v7_dma_map_area) + add r1, r1, r0 + teq r2, #DMA_FROM_DEVICE + beq v7_dma_inv_range + b v7_dma_clean_range +ENDPROC(v7_dma_map_area) + +/* + * dma_unmap_area(start, size, dir) + * - start - kernel virtual start address + * - size - size of region + * - dir - DMA direction + */ +ENTRY(v7_dma_unmap_area) + add r1, r1, r0 + teq r2, #DMA_TO_DEVICE + bne v7_dma_inv_range + ret lr +ENDPROC(v7_dma_unmap_area) + + __INITDATA + + @ define struct cpu_cache_fns (see <asm/cacheflush.h> and proc-macros.S) + define_cache_functions v7 |