24 files changed, 7857 insertions, 0 deletions
diff --git a/arch/arm/nwfpe/ARM-gcc.h b/arch/arm/nwfpe/ARM-gcc.h
new file mode 100644
index 000000000..436e54aa0
--- /dev/null
+++ b/arch/arm/nwfpe/ARM-gcc.h
@@ -0,0 +1,120 @@
+/*
+-------------------------------------------------------------------------------
+The macro `BITS64' can be defined to indicate that 64-bit integer types are
+supported by the compiler.
+-------------------------------------------------------------------------------
+*/
+#define BITS64
+
+/*
+-------------------------------------------------------------------------------
+Each of the following `typedef's defines the most convenient type that holds
+integers of at least as many bits as specified.  For example, `uint8' should
+be the most convenient type that can hold unsigned integers of as many as
+8 bits.  The `flag' type must be able to hold either a 0 or 1.  For most
+implementations of C, `flag', `uint8', and `int8' should all be `typedef'ed
+to the same as `int'.
+-------------------------------------------------------------------------------
+*/
+typedef char flag;
+typedef unsigned char uint8;
+typedef signed char int8;
+typedef int uint16;
+typedef int int16;
+typedef unsigned int uint32;
+typedef signed int int32;
+#ifdef BITS64
+typedef unsigned long long int bits64;
+typedef signed long long int sbits64;
+#endif
+
+/*
+-------------------------------------------------------------------------------
+Each of the following `typedef's defines a type that holds integers
+of _exactly_ the number of bits specified.  For instance, for most
+implementation of C, `bits16' and `sbits16' should be `typedef'ed to
+`unsigned short int' and `signed short int' (or `short int'), respectively.
+-------------------------------------------------------------------------------
+*/
+typedef unsigned char bits8;
+typedef signed char sbits8;
+typedef unsigned short int bits16;
+typedef signed short int sbits16;
+typedef unsigned int bits32;
+typedef signed int sbits32;
+#ifdef BITS64
+typedef unsigned long long int uint64;
+typedef signed long long int int64;
+#endif
+
+#ifdef BITS64
+/*
+-------------------------------------------------------------------------------
+The `LIT64' macro takes as its argument a textual integer literal and if
+necessary ``marks'' the literal as having a 64-bit integer type.  For
+example, the Gnu C Compiler (`gcc') requires that 64-bit literals be
+appended with the letters `LL' standing for `long long', which is `gcc's
+name for the 64-bit integer type.  Some compilers may allow `LIT64' to be
+defined as the identity macro:  `#define LIT64( a ) a'.
+-------------------------------------------------------------------------------
+*/
+#define LIT64( a ) a##LL
+#endif
+
+/*
+-------------------------------------------------------------------------------
+The macro `INLINE' can be used before functions that should be inlined.  If
+a compiler does not support explicit inlining, this macro should be defined
+to be `static'.
+-------------------------------------------------------------------------------
+*/
+#define INLINE static inline
+
+
+/* For use as a GCC soft-float library we need some special function names. */
+
+#ifdef __LIBFLOAT__
+
+/* Some 32-bit ops can be mapped straight across by just changing the name. */
+#define float32_add			__addsf3
+#define float32_sub			__subsf3
+#define float32_mul			__mulsf3
+#define float32_div			__divsf3
+#define int32_to_float32		__floatsisf
+#define float32_to_int32_round_to_zero	__fixsfsi
+#define float32_to_uint32_round_to_zero	__fixunssfsi
+
+/* These ones go through the glue code.  To avoid namespace pollution
+   we rename the internal functions too.  */
+#define float32_eq			___float32_eq
+#define float32_le			___float32_le
+#define float32_lt			___float32_lt
+
+/* All the 64-bit ops have to go through the glue, so we pull the same
+   trick.  */
+#define float64_add			___float64_add
+#define float64_sub			___float64_sub
+#define float64_mul			___float64_mul
+#define float64_div			___float64_div
+#define int32_to_float64		___int32_to_float64
+#define float64_to_int32_round_to_zero	___float64_to_int32_round_to_zero
+#define float64_to_uint32_round_to_zero	___float64_to_uint32_round_to_zero
+#define float64_to_float32		___float64_to_float32
+#define float32_to_float64		___float32_to_float64
+#define float64_eq			___float64_eq
+#define float64_le			___float64_le
+#define float64_lt			___float64_lt
+
+#if 0
+#define float64_add			__adddf3
+#define float64_sub			__subdf3
+#define float64_mul			__muldf3
+#define float64_div			__divdf3
+#define int32_to_float64		__floatsidf
+#define float64_to_int32_round_to_zero	__fixdfsi
+#define float64_to_uint32_round_to_zero	__fixunsdfsi
+#define float64_to_float32		__truncdfsf2
+#define float32_to_float64		__extendsfdf2
+#endif
+
+#endif
diff --git a/arch/arm/nwfpe/ChangeLog b/arch/arm/nwfpe/ChangeLog
new file mode 100644
index 000000000..fa8028b1e
--- /dev/null
+++ b/arch/arm/nwfpe/ChangeLog
@@ -0,0 +1,91 @@
+2003-03-22  Ralph Siemsen <ralphs@netwinder.org>
+	* Reformat all but softfloat files to get a consistent coding style.
+	  Used "indent -kr -i8 -ts8 -sob -l132 -ss" and a few manual fixups.
+	* Removed dead code and fixed function protypes to match definitions.
+	* Consolidated use of (opcode && MASK_ARITHMETIC_OPCODE) >> 20.
+	* Make 80-bit precision a compile-time option. (1%)
+	* Only initialize FPE state once in repeat-FP situations. (6%)
+
+2002-01-19  Russell King <rmk@arm.linux.org.uk>
+
+	* fpa11.h - Add documentation
+	          - remove userRegisters pointer from this structure.
+	          - add new method to obtain integer register values.
+	* softfloat.c - Remove float128
+	* softfloat.h - Remove float128
+	* softfloat-specialize - Remove float128
+
+	* The FPA11 structure is not a kernel-specific data structure.
+	  It is used by users of ptrace to examine the values of the
+	  floating point registers.  Therefore, any changes to the
+	  FPA11 structure (size or position of elements contained
+	  within) have to be well thought out.
+
+	* Since 128-bit float requires the FPA11 structure to change
+	  size, it has been removed.  128-bit float is currently unused,
+	  and needs various things to be re-worked so that we won't
+	  overflow the available space in the task structure.
+
+	* The changes are designed to break any patch that goes on top
+	  of this code, so that the authors properly review their changes.
+
+1999-08-19  Scott Bambrough  <scottb@netwinder.org>
+
+	* fpmodule.c - Changed version number to 0.95
+	* fpa11.h - modified FPA11, FPREG structures
+	* fpa11.c - Changes due to FPA11, FPREG structure alterations.
+	* fpa11_cpdo.c - Changes due to FPA11, FPREG structure alterations.
+	* fpa11_cpdt.c - Changes due to FPA11, FPREG structure alterations.
+	* fpa11_cprt.c - Changes due to FPA11, FPREG structure alterations.
+	* single_cpdo.c - Changes due to FPA11, FPREG structure alterations.
+	* double_cpdo.c - Changes due to FPA11, FPREG structure alterations.
+	* extended_cpdo.c - Changes due to FPA11, FPREG structure alterations.
+
+	* I discovered several bugs.  First and worst is that the kernel
+	  passes in a pointer to the FPE's state area.	This is defined
+	  as a struct user_fp (see user.h).  This pointer was cast to a
+	  FPA11*.  Unfortunately FPA11 and user_fp are of different sizes;
+	  user_fp is smaller.  This meant that the FPE scribbled on things
+	  below its area, which is bad, as the area is in the thread_struct
+	  embedded in the process task structure.  Thus we were scribbling
+	  over one of the most important structures in the entire OS.
+
+	* user_fp and FPA11 have now been harmonized.  Most of the changes
+	  in the above code were dereferencing problems due to moving the
+	  register type out of FPREG, and getting rid of the union variable
+	  fpvalue.
+
+	* Second I noticed resetFPA11 was not always being called for a
+	  task.  This should happen on the first floating point exception
+	  that occurs.	It is controlled by init_flag in FPA11.  The
+	  comment in the code beside init_flag state the kernel guarantees
+	  this to be zero.  Not so.  I found that the kernel recycles task
+	  structures, and that recycled ones may not have init_flag zeroed.
+	  I couldn't even find anything that guarantees it is zeroed when
+	  when the task structure is initially allocated.  In any case
+	  I now initialize the entire FPE state in the thread structure to
+	  zero when allocated and recycled.  See alloc_task_struct() and
+	  flush_thread() in arch/arm/process.c.  The change to
+	  alloc_task_struct() may not be necessary, but I left it in for
+	  completeness (better safe than sorry).
+
+1998-11-23  Scott Bambrough  <scottb@netwinder.org>
+
+	* README.FPE - fix typo in description of lfm/sfm instructions
+	* NOTES - Added file to describe known bugs/problems
+	* fpmodule.c - Changed version number to 0.94
+
+1998-11-20  Scott Bambrough  <scottb@netwinder.org>
+
+	* README.FPE - fix description of URD, NRM instructions
+	* TODO - remove URD, NRM instructions from TODO list
+	* single_cpdo.c - implement URD, NRM
+	* double_cpdo.c - implement URD, NRM
+	* extended_cpdo.c - implement URD, NRM
+
+1998-11-19  Scott Bambrough  <scottb@netwinder.org>
+
+	* ChangeLog - Added this file to track changes made.
+	* fpa11.c - added code to initialize register types to typeNone
+	* fpa11_cpdt.c - fixed bug in storeExtended (typeExtended changed to
+	  typeDouble in switch statement)
diff --git a/arch/arm/nwfpe/Makefile b/arch/arm/nwfpe/Makefile
new file mode 100644
index 000000000..deb3a82dd
--- /dev/null
+++ b/arch/arm/nwfpe/Makefile
@@ -0,0 +1,12 @@
+#
+# Copyright (C) 1998, 1999, 2001 Philip Blundell
+#
+
+obj-$(CONFIG_FPE_NWFPE)		+= nwfpe.o
+
+nwfpe-y				+= fpa11.o fpa11_cpdo.o fpa11_cpdt.o \
+				   fpa11_cprt.o fpmodule.o fpopcode.o \
+				   softfloat.o single_cpdo.o double_cpdo.o \
+				   entry.o
+
+nwfpe-$(CONFIG_FPE_NWFPE_XP)	+= extended_cpdo.o
diff --git a/arch/arm/nwfpe/double_cpdo.c b/arch/arm/nwfpe/double_cpdo.c
new file mode 100644
index 000000000..c51d1386a
--- /dev/null
+++ b/arch/arm/nwfpe/double_cpdo.c
@@ -0,0 +1,167 @@
+/*
+    NetWinder Floating Point Emulator
+    (c) Rebel.COM, 1998,1999
+
+    Direct questions, comments to Scott Bambrough <scottb@netwinder.org>
+
+    This program is free software; you can redistribute it and/or modify
+    it under the terms of the GNU General Public License as published by
+    the Free Software Foundation; either version 2 of the License, or
+    (at your option) any later version.
+
+    This program is distributed in the hope that it will be useful,
+    but WITHOUT ANY WARRANTY; without even the implied warranty of
+    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+    GNU General Public License for more details.
+
+    You should have received a copy of the GNU General Public License
+    along with this program; if not, write to the Free Software
+    Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+*/
+
+#include "fpa11.h"
+#include "softfloat.h"
+#include "fpopcode.h"
+
+union float64_components {
+	float64 f64;
+	unsigned int i[2];
+};
+
+float64 float64_exp(float64 Fm);
+float64 float64_ln(float64 Fm);
+float64 float64_sin(float64 rFm);
+float64 float64_cos(float64 rFm);
+float64 float64_arcsin(float64 rFm);
+float64 float64_arctan(float64 rFm);
+float64 float64_log(float64 rFm);
+float64 float64_tan(float64 rFm);
+float64 float64_arccos(float64 rFm);
+float64 float64_pow(float64 rFn, float64 rFm);
+float64 float64_pol(float64 rFn, float64 rFm);
+
+static float64 float64_rsf(struct roundingData *roundData, float64 rFn, float64 rFm)
+{
+	return float64_sub(roundData, rFm, rFn);
+}
+
+static float64 float64_rdv(struct roundingData *roundData, float64 rFn, float64 rFm)
+{
+	return float64_div(roundData, rFm, rFn);
+}
+
+static float64 (*const dyadic_double[16])(struct roundingData*, float64 rFn, float64 rFm) = {
+	[ADF_CODE >> 20] = float64_add,
+	[MUF_CODE >> 20] = float64_mul,
+	[SUF_CODE >> 20] = float64_sub,
+	[RSF_CODE >> 20] = float64_rsf,
+	[DVF_CODE >> 20] = float64_div,
+	[RDF_CODE >> 20] = float64_rdv,
+	[RMF_CODE >> 20] = float64_rem,
+
+	/* strictly, these opcodes should not be implemented */
+	[FML_CODE >> 20] = float64_mul,
+	[FDV_CODE >> 20] = float64_div,
+	[FRD_CODE >> 20] = float64_rdv,
+};
+
+static float64 float64_mvf(struct roundingData *roundData,float64 rFm)
+{
+	return rFm;
+}
+
+static float64 float64_mnf(struct roundingData *roundData,float64 rFm)
+{
+	union float64_components u;
+
+	u.f64 = rFm;
+#ifdef __ARMEB__
+	u.i[0] ^= 0x80000000;
+#else
+	u.i[1] ^= 0x80000000;
+#endif
+
+	return u.f64;
+}
+
+static float64 float64_abs(struct roundingData *roundData,float64 rFm)
+{
+	union float64_components u;
+
+	u.f64 = rFm;
+#ifdef __ARMEB__
+	u.i[0] &= 0x7fffffff;
+#else
+	u.i[1] &= 0x7fffffff;
+#endif
+
+	return u.f64;
+}
+
+static float64 (*const monadic_double[16])(struct roundingData *, float64 rFm) = {
+	[MVF_CODE >> 20] = float64_mvf,
+	[MNF_CODE >> 20] = float64_mnf,
+	[ABS_CODE >> 20] = float64_abs,
+	[RND_CODE >> 20] = float64_round_to_int,
+	[URD_CODE >> 20] = float64_round_to_int,
+	[SQT_CODE >> 20] = float64_sqrt,
+	[NRM_CODE >> 20] = float64_mvf,
+};
+
+unsigned int DoubleCPDO(struct roundingData *roundData, const unsigned int opcode, FPREG * rFd)
+{
+	FPA11 *fpa11 = GET_FPA11();
+	float64 rFm;
+	unsigned int Fm, opc_mask_shift;
+
+	Fm = getFm(opcode);
+	if (CONSTANT_FM(opcode)) {
+		rFm = getDoubleConstant(Fm);
+	} else {
+		switch (fpa11->fType[Fm]) {
+		case typeSingle:
+			rFm = float32_to_float64(fpa11->fpreg[Fm].fSingle);
+			break;
+
+		case typeDouble:
+			rFm = fpa11->fpreg[Fm].fDouble;
+			break;
+
+		default:
+			return 0;
+		}
+	}
+
+	opc_mask_shift = (opcode & MASK_ARITHMETIC_OPCODE) >> 20;
+	if (!MONADIC_INSTRUCTION(opcode)) {
+		unsigned int Fn = getFn(opcode);
+		float64 rFn;
+
+		switch (fpa11->fType[Fn]) {
+		case typeSingle:
+			rFn = float32_to_float64(fpa11->fpreg[Fn].fSingle);
+			break;
+
+		case typeDouble:
+			rFn = fpa11->fpreg[Fn].fDouble;
+			break;
+
+		default:
+			return 0;
+		}
+
+		if (dyadic_double[opc_mask_shift]) {
+			rFd->fDouble = dyadic_double[opc_mask_shift](roundData, rFn, rFm);
+		} else {
+			return 0;
+		}
+	} else {
+		if (monadic_double[opc_mask_shift]) {
+			rFd->fDouble = monadic_double[opc_mask_shift](roundData, rFm);
+		} else {
+			return 0;
+		}
+	}
+
+	return 1;
+}
diff --git a/arch/arm/nwfpe/entry.S b/arch/arm/nwfpe/entry.S
new file mode 100644
index 000000000..71df43547
--- /dev/null
+++ b/arch/arm/nwfpe/entry.S
@@ -0,0 +1,124 @@
+/*
+    NetWinder Floating Point Emulator
+    (c) Rebel.COM, 1998
+    (c) 1998, 1999 Philip Blundell
+
+    Direct questions, comments to Scott Bambrough <scottb@netwinder.org>
+
+    This program is free software; you can redistribute it and/or modify
+    it under the terms of the GNU General Public License as published by
+    the Free Software Foundation; either version 2 of the License, or
+    (at your option) any later version.
+
+    This program is distributed in the hope that it will be useful,
+    but WITHOUT ANY WARRANTY; without even the implied warranty of
+    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+    GNU General Public License for more details.
+
+    You should have received a copy of the GNU General Public License
+    along with this program; if not, write to the Free Software
+    Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+*/
+#include <asm/assembler.h>
+#include <asm/opcodes.h>
+
+/* This is the kernel's entry point into the floating point emulator.
+It is called from the kernel with code similar to this:
+
+	sub	r4, r5, #4
+	ldrt	r0, [r4]			@ r0  = instruction
+	adrsvc	al, r9, ret_from_exception	@ r9  = normal FP return
+	adrsvc	al, lr, fpundefinstr		@ lr  = undefined instr return
+
+	get_current_task r10
+	mov	r8, #1
+	strb	r8, [r10, #TSK_USED_MATH]	@ set current->used_math
+	add	r10, r10, #TSS_FPESAVE		@ r10 = workspace
+	ldr	r4, .LC2
+	ldr	pc, [r4]			@ Call FP emulator entry point
+
+The kernel expects the emulator to return via one of two possible
+points of return it passes to the emulator.  The emulator, if
+successful in its emulation, jumps to ret_from_exception (passed in
+r9) and the kernel takes care of returning control from the trap to
+the user code.  If the emulator is unable to emulate the instruction,
+it returns via _fpundefinstr (passed via lr) and the kernel halts the
+user program with a core dump.
+
+On entry to the emulator r10 points to an area of private FP workspace
+reserved in the thread structure for this process.  This is where the
+emulator saves its registers across calls.  The first word of this area
+is used as a flag to detect the first time a process uses floating point,
+so that the emulator startup cost can be avoided for tasks that don't
+want it.
+
+This routine does three things:
+
+1) The kernel has created a struct pt_regs on the stack and saved the
+user registers into it.  See /usr/include/asm/proc/ptrace.h for details.
+
+2) It calls EmulateAll to emulate a floating point instruction.
+EmulateAll returns 1 if the emulation was successful, or 0 if not.
+
+3) If an instruction has been emulated successfully, it looks ahead at
+the next instruction.  If it is a floating point instruction, it
+executes the instruction, without returning to user space.  In this
+way it repeatedly looks ahead and executes floating point instructions
+until it encounters a non floating point instruction, at which time it
+returns via _fpreturn.
+
+This is done to reduce the effect of the trap overhead on each
+floating point instructions.  GCC attempts to group floating point
+instructions to allow the emulator to spread the cost of the trap over
+several floating point instructions.  */
+
+#include <asm/asm-offsets.h>
+
+	.globl	nwfpe_enter
+nwfpe_enter:
+	mov	r4, lr			@ save the failure-return addresses
+	mov	sl, sp			@ we access the registers via 'sl'
+
+	ldr	r5, [sp, #S_PC]		@ get contents of PC;
+	mov	r6, r0			@ save the opcode
+emulate:
+	ldr	r1, [sp, #S_PSR]	@ fetch the PSR
+	bl	arm_check_condition	@ check the condition
+	cmp	r0, #ARM_OPCODE_CONDTEST_PASS	@ condition passed?
+
+	@ if condition code failed to match, next insn
+	bne	next			@ get the next instruction;
+
+	mov	r0, r6			@ prepare for EmulateAll()
+	bl	EmulateAll		@ emulate the instruction
+	cmp	r0, #0			@ was emulation successful
+	reteq	r4			@ no, return failure
+
+next:
+.Lx1:	ldrt	r6, [r5], #4		@ get the next instruction and
+					@ increment PC
+
+	and	r2, r6, #0x0F000000	@ test for FP insns
+	teq	r2, #0x0C000000
+	teqne	r2, #0x0D000000
+	teqne	r2, #0x0E000000
+	retne	r9			@ return ok if not a fp insn
+
+	str	r5, [sp, #S_PC]		@ update PC copy in regs
+
+	mov	r0, r6			@ save a copy
+	b	emulate			@ check condition and emulate
+
+	@ We need to be prepared for the instructions at .Lx1 and .Lx2 
+	@ to fault.  Emit the appropriate exception gunk to fix things up.
+	@ ??? For some reason, faults can happen at .Lx2 even with a
+	@ plain LDR instruction.  Weird, but it seems harmless.
+	.pushsection .text.fixup,"ax"
+	.align	2
+.Lfix:	ret	r9			@ let the user eat segfaults
+	.popsection
+
+	.pushsection __ex_table,"a"
+	.align	3
+	.long	.Lx1, .Lfix
+	.popsection
diff --git a/arch/arm/nwfpe/extended_cpdo.c b/arch/arm/nwfpe/extended_cpdo.c
new file mode 100644
index 000000000..65a279ba9
--- /dev/null
+++ b/arch/arm/nwfpe/extended_cpdo.c
@@ -0,0 +1,154 @@
+/*
+    NetWinder Floating Point Emulator
+    (c) Rebel.COM, 1998,1999
+
+    Direct questions, comments to Scott Bambrough <scottb@netwinder.org>
+
+    This program is free software; you can redistribute it and/or modify
+    it under the terms of the GNU General Public License as published by
+    the Free Software Foundation; either version 2 of the License, or
+    (at your option) any later version.
+
+    This program is distributed in the hope that it will be useful,
+    but WITHOUT ANY WARRANTY; without even the implied warranty of
+    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+    GNU General Public License for more details.
+
+    You should have received a copy of the GNU General Public License
+    along with this program; if not, write to the Free Software
+    Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+*/
+
+#include "fpa11.h"
+#include "softfloat.h"
+#include "fpopcode.h"
+
+floatx80 floatx80_exp(floatx80 Fm);
+floatx80 floatx80_ln(floatx80 Fm);
+floatx80 floatx80_sin(floatx80 rFm);
+floatx80 floatx80_cos(floatx80 rFm);
+floatx80 floatx80_arcsin(floatx80 rFm);
+floatx80 floatx80_arctan(floatx80 rFm);
+floatx80 floatx80_log(floatx80 rFm);
+floatx80 floatx80_tan(floatx80 rFm);
+floatx80 floatx80_arccos(floatx80 rFm);
+floatx80 floatx80_pow(floatx80 rFn, floatx80 rFm);
+floatx80 floatx80_pol(floatx80 rFn, floatx80 rFm);
+
+static floatx80 floatx80_rsf(struct roundingData *roundData, floatx80 rFn, floatx80 rFm)
+{
+	return floatx80_sub(roundData, rFm, rFn);
+}
+
+static floatx80 floatx80_rdv(struct roundingData *roundData, floatx80 rFn, floatx80 rFm)
+{
+	return floatx80_div(roundData, rFm, rFn);
+}
+
+static floatx80 (*const dyadic_extended[16])(struct roundingData*, floatx80 rFn, floatx80 rFm) = {
+	[ADF_CODE >> 20] = floatx80_add,
+	[MUF_CODE >> 20] = floatx80_mul,
+	[SUF_CODE >> 20] = floatx80_sub,
+	[RSF_CODE >> 20] = floatx80_rsf,
+	[DVF_CODE >> 20] = floatx80_div,
+	[RDF_CODE >> 20] = floatx80_rdv,
+	[RMF_CODE >> 20] = floatx80_rem,
+
+	/* strictly, these opcodes should not be implemented */
+	[FML_CODE >> 20] = floatx80_mul,
+	[FDV_CODE >> 20] = floatx80_div,
+	[FRD_CODE >> 20] = floatx80_rdv,
+};
+
+static floatx80 floatx80_mvf(struct roundingData *roundData, floatx80 rFm)
+{
+	return rFm;
+}
+
+static floatx80 floatx80_mnf(struct roundingData *roundData, floatx80 rFm)
+{
+	rFm.high ^= 0x8000;
+	return rFm;
+}
+
+static floatx80 floatx80_abs(struct roundingData *roundData, floatx80 rFm)
+{
+	rFm.high &= 0x7fff;
+	return rFm;
+}
+
+static floatx80 (*const monadic_extended[16])(struct roundingData*, floatx80 rFm) = {
+	[MVF_CODE >> 20] = floatx80_mvf,
+	[MNF_CODE >> 20] = floatx80_mnf,
+	[ABS_CODE >> 20] = floatx80_abs,
+	[RND_CODE >> 20] = floatx80_round_to_int,
+	[URD_CODE >> 20] = floatx80_round_to_int,
+	[SQT_CODE >> 20] = floatx80_sqrt,
+	[NRM_CODE >> 20] = floatx80_mvf,
+};
+
+unsigned int ExtendedCPDO(struct roundingData *roundData, const unsigned int opcode, FPREG * rFd)
+{
+	FPA11 *fpa11 = GET_FPA11();
+	floatx80 rFm;
+	unsigned int Fm, opc_mask_shift;
+
+	Fm = getFm(opcode);
+	if (CONSTANT_FM(opcode)) {
+		rFm = getExtendedConstant(Fm);
+	} else {
+		switch (fpa11->fType[Fm]) {
+		case typeSingle:
+			rFm = float32_to_floatx80(fpa11->fpreg[Fm].fSingle);
+			break;
+
+		case typeDouble:
+			rFm = float64_to_floatx80(fpa11->fpreg[Fm].fDouble);
+			break;
+
+		case typeExtended:
+			rFm = fpa11->fpreg[Fm].fExtended;
+			break;
+
+		default:
+			return 0;
+		}
+	}
+
+	opc_mask_shift = (opcode & MASK_ARITHMETIC_OPCODE) >> 20;
+	if (!MONADIC_INSTRUCTION(opcode)) {
+		unsigned int Fn = getFn(opcode);
+		floatx80 rFn;
+
+		switch (fpa11->fType[Fn]) {
+		case typeSingle:
+			rFn = float32_to_floatx80(fpa11->fpreg[Fn].fSingle);
+			break;
+
+		case typeDouble:
+			rFn = float64_to_floatx80(fpa11->fpreg[Fn].fDouble);
+			break;
+
+		case typeExtended:
+			rFn = fpa11->fpreg[Fn].fExtended;
+			break;
+
+		default:
+			return 0;
+		}
+
+		if (dyadic_extended[opc_mask_shift]) {
+			rFd->fExtended = dyadic_extended[opc_mask_shift](roundData, rFn, rFm);
+		} else {
+			return 0;
+		}
+	} else {
+		if (monadic_extended[opc_mask_shift]) {
+			rFd->fExtended = monadic_extended[opc_mask_shift](roundData, rFm);
+		} else {
+			return 0;
+		}
+	}
+
+	return 1;
+}
diff --git a/arch/arm/nwfpe/fpa11.c b/arch/arm/nwfpe/fpa11.c
new file mode 100644
index 000000000..2782ebcc2
--- /dev/null
+++ b/arch/arm/nwfpe/fpa11.c
@@ -0,0 +1,128 @@
+/*
+    NetWinder Floating Point Emulator
+    (c) Rebel.COM, 1998,1999
+    (c) Philip Blundell, 2001
+
+    Direct questions, comments to Scott Bambrough <scottb@netwinder.org>
+
+    This program is free software; you can redistribute it and/or modify
+    it under the terms of the GNU General Public License as published by
+    the Free Software Foundation; either version 2 of the License, or
+    (at your option) any later version.
+
+    This program is distributed in the hope that it will be useful,
+    but WITHOUT ANY WARRANTY; without even the implied warranty of
+    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+    GNU General Public License for more details.
+
+    You should have received a copy of the GNU General Public License
+    along with this program; if not, write to the Free Software
+    Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+*/
+
+#include "fpa11.h"
+#include "fpopcode.h"
+
+#include "fpmodule.h"
+#include "fpmodule.inl"
+
+#include <linux/compiler.h>
+#include <linux/string.h>
+
+/* Reset the FPA11 chip.  Called to initialize and reset the emulator. */
+static void resetFPA11(void)
+{
+	int i;
+	FPA11 *fpa11 = GET_FPA11();
+
+	/* initialize the register type array */
+	for (i = 0; i <= 7; i++) {
+		fpa11->fType[i] = typeNone;
+	}
+
+	/* FPSR: set system id to FP_EMULATOR, set AC, clear all other bits */
+	fpa11->fpsr = FP_EMULATOR | BIT_AC;
+}
+
+int8 SetRoundingMode(const unsigned int opcode)
+{
+	switch (opcode & MASK_ROUNDING_MODE) {
+	default:
+	case ROUND_TO_NEAREST:
+		return float_round_nearest_even;
+
+	case ROUND_TO_PLUS_INFINITY:
+		return float_round_up;
+
+	case ROUND_TO_MINUS_INFINITY:
+		return float_round_down;
+
+	case ROUND_TO_ZERO:
+		return float_round_to_zero;
+	}
+}
+
+int8 SetRoundingPrecision(const unsigned int opcode)
+{
+#ifdef CONFIG_FPE_NWFPE_XP
+	switch (opcode & MASK_ROUNDING_PRECISION) {
+	case ROUND_SINGLE:
+		return 32;
+
+	case ROUND_DOUBLE:
+		return 64;
+
+	case ROUND_EXTENDED:
+		return 80;
+
+	default:
+		return 80;
+	}
+#endif
+	return 80;
+}
+
+void nwfpe_init_fpa(union fp_state *fp)
+{
+	FPA11 *fpa11 = (FPA11 *)fp;
+#ifdef NWFPE_DEBUG
+	printk("NWFPE: setting up state.\n");
+#endif
+ 	memset(fpa11, 0, sizeof(FPA11));
+	resetFPA11();
+	fpa11->initflag = 1;
+}
+
+/* Emulate the instruction in the opcode. */
+unsigned int EmulateAll(unsigned int opcode)
+{
+	unsigned int code;
+
+#ifdef NWFPE_DEBUG
+	printk("NWFPE: emulating opcode %08x\n", opcode);
+#endif
+	code = opcode & 0x00000f00;
+	if (code == 0x00000100 || code == 0x00000200) {
+		/* For coprocessor 1 or 2 (FPA11) */
+		code = opcode & 0x0e000000;
+		if (code == 0x0e000000) {
+			if (opcode & 0x00000010) {
+				/* Emulate conversion opcodes. */
+				/* Emulate register transfer opcodes. */
+				/* Emulate comparison opcodes. */
+				return EmulateCPRT(opcode);
+			} else {
+				/* Emulate monadic arithmetic opcodes. */
+				/* Emulate dyadic arithmetic opcodes. */
+				return EmulateCPDO(opcode);
+			}
+		} else if (code == 0x0c000000) {
+			/* Emulate load/store opcodes. */
+			/* Emulate load/store multiple opcodes. */
+			return EmulateCPDT(opcode);
+		}
+	}
+
+	/* Invalid instruction detected.  Return FALSE. */
+	return 0;
+}
diff --git a/arch/arm/nwfpe/fpa11.h b/arch/arm/nwfpe/fpa11.h
new file mode 100644
index 000000000..d3a6f9298
--- /dev/null
+++ b/arch/arm/nwfpe/fpa11.h
@@ -0,0 +1,121 @@
+/*
+    NetWinder Floating Point Emulator
+    (c) Rebel.com, 1998-1999
+    
+    Direct questions, comments to Scott Bambrough <scottb@netwinder.org>
+
+    This program is free software; you can redistribute it and/or modify
+    it under the terms of the GNU General Public License as published by
+    the Free Software Foundation; either version 2 of the License, or
+    (at your option) any later version.
+
+    This program is distributed in the hope that it will be useful,
+    but WITHOUT ANY WARRANTY; without even the implied warranty of
+    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+    GNU General Public License for more details.
+
+    You should have received a copy of the GNU General Public License
+    along with this program; if not, write to the Free Software
+    Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+*/
+
+#ifndef __FPA11_H__
+#define __FPA11_H__
+
+#define GET_FPA11() ((FPA11 *)(&current_thread_info()->fpstate))
+
+/*
+ * The processes registers are always at the very top of the 8K
+ * stack+task struct.  Use the same method as 'current' uses to
+ * reach them.
+ */
+#define GET_USERREG() ((struct pt_regs *)(THREAD_START_SP + (unsigned long)current_thread_info()) - 1)
+
+#include <linux/thread_info.h>
+
+/* includes */
+#include "fpsr.h"		/* FP control and status register definitions */
+#include "milieu.h"
+
+struct roundingData {
+    int8 mode;
+    int8 precision;
+    signed char exception;
+};
+
+#include "softfloat.h"
+
+#define		typeNone		0x00
+#define		typeSingle		0x01
+#define		typeDouble		0x02
+#define		typeExtended		0x03
+
+/*
+ * This must be no more and no less than 12 bytes.
+ */
+typedef union tagFPREG {
+	float32 fSingle;
+	float64 fDouble;
+#ifdef CONFIG_FPE_NWFPE_XP
+	floatx80 fExtended;
+#else
+	u32 padding[3];
+#endif
+} __attribute__ ((packed,aligned(4))) FPREG;
+
+/*
+ * FPA11 device model.
+ *
+ * This structure is exported to user space.  Do not re-order.
+ * Only add new stuff to the end, and do not change the size of
+ * any element.  Elements of this structure are used by user
+ * space, and must match struct user_fp in <asm/user.h>.
+ * We include the byte offsets below for documentation purposes.
+ *
+ * The size of this structure and FPREG are checked by fpmodule.c
+ * on initialisation.  If the rules have been broken, NWFPE will
+ * not initialise.
+ */
+typedef struct tagFPA11 {
+/*   0 */ FPREG fpreg[8];	/* 8 floating point registers */
+/*  96 */ FPSR fpsr;		/* floating point status register */
+/* 100 */ FPCR fpcr;		/* floating point control register */
+/* 104 */ unsigned char fType[8];	/* type of floating point value held in
+					   floating point registers.  One of
+					   none, single, double or extended. */
+/* 112 */ int initflag;		/* this is special.  The kernel guarantees
+				   to set it to 0 when a thread is launched,
+				   so we can use it to detect whether this
+				   instance of the emulator needs to be
+				   initialised. */
+} __attribute__ ((packed,aligned(4))) FPA11;
+
+extern int8 SetRoundingMode(const unsigned int);
+extern int8 SetRoundingPrecision(const unsigned int);
+extern void nwfpe_init_fpa(union fp_state *fp);
+
+extern unsigned int EmulateAll(unsigned int opcode);
+
+extern unsigned int EmulateCPDT(const unsigned int opcode);
+extern unsigned int EmulateCPDO(const unsigned int opcode);
+extern unsigned int EmulateCPRT(const unsigned int opcode);
+
+/* fpa11_cpdt.c */
+extern unsigned int PerformLDF(const unsigned int opcode);
+extern unsigned int PerformSTF(const unsigned int opcode);
+extern unsigned int PerformLFM(const unsigned int opcode);
+extern unsigned int PerformSFM(const unsigned int opcode);
+
+/* single_cpdo.c */
+
+extern unsigned int SingleCPDO(struct roundingData *roundData,
+			       const unsigned int opcode, FPREG * rFd);
+/* double_cpdo.c */
+extern unsigned int DoubleCPDO(struct roundingData *roundData,
+			       const unsigned int opcode, FPREG * rFd);
+
+/* extneded_cpdo.c */
+extern unsigned int ExtendedCPDO(struct roundingData *roundData,
+				 const unsigned int opcode, FPREG * rFd);
+
+#endif
diff --git a/arch/arm/nwfpe/fpa11.inl b/arch/arm/nwfpe/fpa11.inl
new file mode 100644
index 000000000..ab8d68262
--- /dev/null
+++ b/arch/arm/nwfpe/fpa11.inl
@@ -0,0 +1,51 @@
+/*
+    NetWinder Floating Point Emulator
+    (c) Rebel.COM, 1998,1999
+
+    Direct questions, comments to Scott Bambrough <scottb@netwinder.org>
+
+    This program is free software; you can redistribute it and/or modify
+    it under the terms of the GNU General Public License as published by
+    the Free Software Foundation; either version 2 of the License, or
+    (at your option) any later version.
+
+    This program is distributed in the hope that it will be useful,
+    but WITHOUT ANY WARRANTY; without even the implied warranty of
+    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+    GNU General Public License for more details.
+
+    You should have received a copy of the GNU General Public License
+    along with this program; if not, write to the Free Software
+    Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+*/
+
+#include "fpa11.h"
+
+/* Read and write floating point status register */
+static inline unsigned int readFPSR(void)
+{
+	FPA11 *fpa11 = GET_FPA11();
+	return (fpa11->fpsr);
+}
+
+static inline void writeFPSR(FPSR reg)
+{
+	FPA11 *fpa11 = GET_FPA11();
+	/* the sysid byte in the status register is readonly */
+	fpa11->fpsr = (fpa11->fpsr & MASK_SYSID) | (reg & ~MASK_SYSID);
+}
+
+/* Read and write floating point control register */
+static inline FPCR readFPCR(void)
+{
+	FPA11 *fpa11 = GET_FPA11();
+	/* clear SB, AB and DA bits before returning FPCR */
+	return (fpa11->fpcr & ~MASK_RFC);
+}
+
+static inline void writeFPCR(FPCR reg)
+{
+	FPA11 *fpa11 = GET_FPA11();
+	fpa11->fpcr &= ~MASK_WFC;		/* clear SB, AB and DA bits */
+	fpa11->fpcr |= (reg & MASK_WFC);	/* write SB, AB and DA bits */
+}
diff --git a/arch/arm/nwfpe/fpa11_cpdo.c b/arch/arm/nwfpe/fpa11_cpdo.c
new file mode 100644
index 000000000..2cebb1529
--- /dev/null
+++ b/arch/arm/nwfpe/fpa11_cpdo.c
@@ -0,0 +1,137 @@
+/*
+    NetWinder Floating Point Emulator
+    (c) Rebel.COM, 1998,1999
+    (c) Philip Blundell, 2001
+
+    Direct questions, comments to Scott Bambrough <scottb@netwinder.org>
+
+    This program is free software; you can redistribute it and/or modify
+    it under the terms of the GNU General Public License as published by
+    the Free Software Foundation; either version 2 of the License, or
+    (at your option) any later version.
+
+    This program is distributed in the hope that it will be useful,
+    but WITHOUT ANY WARRANTY; without even the implied warranty of
+    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+    GNU General Public License for more details.
+
+    You should have received a copy of the GNU General Public License
+    along with this program; if not, write to the Free Software
+    Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+*/
+
+#include "fpa11.h"
+#include "fpopcode.h"
+
+unsigned int SingleCPDO(struct roundingData *roundData, const unsigned int opcode, FPREG * rFd);
+unsigned int DoubleCPDO(struct roundingData *roundData, const unsigned int opcode, FPREG * rFd);
+unsigned int ExtendedCPDO(struct roundingData *roundData, const unsigned int opcode, FPREG * rFd);
+
+unsigned int EmulateCPDO(const unsigned int opcode)
+{
+	FPA11 *fpa11 = GET_FPA11();
+	FPREG *rFd;
+	unsigned int nType, nDest, nRc;
+	struct roundingData roundData;
+
+	/* Get the destination size.  If not valid let Linux perform
+	   an invalid instruction trap. */
+	nDest = getDestinationSize(opcode);
+	if (typeNone == nDest)
+		return 0;
+
+	roundData.mode = SetRoundingMode(opcode);
+	roundData.precision = SetRoundingPrecision(opcode);
+	roundData.exception = 0;
+
+	/* Compare the size of the operands in Fn and Fm.
+	   Choose the largest size and perform operations in that size,
+	   in order to make use of all the precision of the operands.
+	   If Fm is a constant, we just grab a constant of a size
+	   matching the size of the operand in Fn. */
+	if (MONADIC_INSTRUCTION(opcode))
+		nType = nDest;
+	else
+		nType = fpa11->fType[getFn(opcode)];
+
+	if (!CONSTANT_FM(opcode)) {
+		register unsigned int Fm = getFm(opcode);
+		if (nType < fpa11->fType[Fm]) {
+			nType = fpa11->fType[Fm];
+		}
+	}
+
+	rFd = &fpa11->fpreg[getFd(opcode)];
+
+	switch (nType) {
+	case typeSingle:
+		nRc = SingleCPDO(&roundData, opcode, rFd);
+		break;
+	case typeDouble:
+		nRc = DoubleCPDO(&roundData, opcode, rFd);
+		break;
+#ifdef CONFIG_FPE_NWFPE_XP
+	case typeExtended:
+		nRc = ExtendedCPDO(&roundData, opcode, rFd);
+		break;
+#endif
+	default:
+		nRc = 0;
+	}
+
+	/* The CPDO functions used to always set the destination type
+	   to be the same as their working size. */
+
+	if (nRc != 0) {
+		/* If the operation succeeded, check to see if the result in the
+		   destination register is the correct size.  If not force it
+		   to be. */
+
+		fpa11->fType[getFd(opcode)] = nDest;
+
+#ifdef CONFIG_FPE_NWFPE_XP
+		if (nDest != nType) {
+			switch (nDest) {
+			case typeSingle:
+				{
+					if (typeDouble == nType)
+						rFd->fSingle = float64_to_float32(&roundData, rFd->fDouble);
+					else
+						rFd->fSingle = floatx80_to_float32(&roundData, rFd->fExtended);
+				}
+				break;
+
+			case typeDouble:
+				{
+					if (typeSingle == nType)
+						rFd->fDouble = float32_to_float64(rFd->fSingle);
+					else
+						rFd->fDouble = floatx80_to_float64(&roundData, rFd->fExtended);
+				}
+				break;
+
+			case typeExtended:
+				{
+					if (typeSingle == nType)
+						rFd->fExtended = float32_to_floatx80(rFd->fSingle);
+					else
+						rFd->fExtended = float64_to_floatx80(rFd->fDouble);
+				}
+				break;
+			}
+		}
+#else
+		if (nDest != nType) {
+			if (nDest == typeSingle)
+				rFd->fSingle = float64_to_float32(&roundData, rFd->fDouble);
+			else
+				rFd->fDouble = float32_to_float64(rFd->fSingle);
+		}
+#endif
+	}
+
+	if (roundData.exception)
+		float_raise(roundData.exception);
+
+	return nRc;
+}
diff --git a/arch/arm/nwfpe/fpa11_cpdt.c b/arch/arm/nwfpe/fpa11_cpdt.c
new file mode 100644
index 000000000..d31c49f95
--- /dev/null
+++ b/arch/arm/nwfpe/fpa11_cpdt.c
@@ -0,0 +1,407 @@
+/*
+    NetWinder Floating Point Emulator
+    (c) Rebel.com, 1998-1999
+    (c) Philip Blundell, 1998, 2001
+
+    Direct questions, comments to Scott Bambrough <scottb@netwinder.org>
+
+    This program is free software; you can redistribute it and/or modify
+    it under the terms of the GNU General Public License as published by
+    the Free Software Foundation; either version 2 of the License, or
+    (at your option) any later version.
+
+    This program is distributed in the hope that it will be useful,
+    but WITHOUT ANY WARRANTY; without even the implied warranty of
+    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+    GNU General Public License for more details.
+
+    You should have received a copy of the GNU General Public License
+    along with this program; if not, write to the Free Software
+    Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+*/
+
+#include "fpa11.h"
+#include "softfloat.h"
+#include "fpopcode.h"
+#include "fpmodule.h"
+#include "fpmodule.inl"
+
+#include <linux/uaccess.h>
+
+static inline void loadSingle(const unsigned int Fn, const unsigned int __user *pMem)
+{
+	FPA11 *fpa11 = GET_FPA11();
+	fpa11->fType[Fn] = typeSingle;
+	get_user(fpa11->fpreg[Fn].fSingle, pMem);
+}
+
+static inline void loadDouble(const unsigned int Fn, const unsigned int __user *pMem)
+{
+	FPA11 *fpa11 = GET_FPA11();
+	unsigned int *p;
+	p = (unsigned int *) &fpa11->fpreg[Fn].fDouble;
+	fpa11->fType[Fn] = typeDouble;
+#ifdef __ARMEB__
+	get_user(p[0], &pMem[0]);	/* sign & exponent */
+	get_user(p[1], &pMem[1]);
+#else
+	get_user(p[0], &pMem[1]);
+	get_user(p[1], &pMem[0]);	/* sign & exponent */
+#endif
+}
+
+#ifdef CONFIG_FPE_NWFPE_XP
+static inline void loadExtended(const unsigned int Fn, const unsigned int __user *pMem)
+{
+	FPA11 *fpa11 = GET_FPA11();
+	unsigned int *p;
+	p = (unsigned int *) &fpa11->fpreg[Fn].fExtended;
+	fpa11->fType[Fn] = typeExtended;
+	get_user(p[0], &pMem[0]);	/* sign & exponent */
+#ifdef __ARMEB__
+	get_user(p[1], &pMem[1]);	/* ms bits */
+	get_user(p[2], &pMem[2]);	/* ls bits */
+#else
+	get_user(p[1], &pMem[2]);	/* ls bits */
+	get_user(p[2], &pMem[1]);	/* ms bits */
+#endif
+}
+#endif
+
+static inline void loadMultiple(const unsigned int Fn, const unsigned int __user *pMem)
+{
+	FPA11 *fpa11 = GET_FPA11();
+	register unsigned int *p;
+	unsigned long x;
+
+	p = (unsigned int *) &(fpa11->fpreg[Fn]);
+	get_user(x, &pMem[0]);
+	fpa11->fType[Fn] = (x >> 14) & 0x00000003;
+
+	switch (fpa11->fType[Fn]) {
+	case typeSingle:
+	case typeDouble:
+		{
+			get_user(p[0], &pMem[2]);	/* Single */
+			get_user(p[1], &pMem[1]);	/* double msw */
+			p[2] = 0;			/* empty */
+		}
+		break;
+
+#ifdef CONFIG_FPE_NWFPE_XP
+	case typeExtended:
+		{
+			get_user(p[1], &pMem[2]);
+			get_user(p[2], &pMem[1]);	/* msw */
+			p[0] = (x & 0x80003fff);
+		}
+		break;
+#endif
+	}
+}
+
+static inline void storeSingle(struct roundingData *roundData, const unsigned int Fn, unsigned int __user *pMem)
+{
+	FPA11 *fpa11 = GET_FPA11();
+	union {
+		float32 f;
+		unsigned int i[1];
+	} val;
+
+	switch (fpa11->fType[Fn]) {
+	case typeDouble:
+		val.f = float64_to_float32(roundData, fpa11->fpreg[Fn].fDouble);
+		break;
+
+#ifdef CONFIG_FPE_NWFPE_XP
+	case typeExtended:
+		val.f = floatx80_to_float32(roundData, fpa11->fpreg[Fn].fExtended);
+		break;
+#endif
+
+	default:
+		val.f = fpa11->fpreg[Fn].fSingle;
+	}
+
+	put_user(val.i[0], pMem);
+}
+
+static inline void storeDouble(struct roundingData *roundData, const unsigned int Fn, unsigned int __user *pMem)
+{
+	FPA11 *fpa11 = GET_FPA11();
+	union {
+		float64 f;
+		unsigned int i[2];
+	} val;
+
+	switch (fpa11->fType[Fn]) {
+	case typeSingle:
+		val.f = float32_to_float64(fpa11->fpreg[Fn].fSingle);
+		break;
+
+#ifdef CONFIG_FPE_NWFPE_XP
+	case typeExtended:
+		val.f = floatx80_to_float64(roundData, fpa11->fpreg[Fn].fExtended);
+		break;
+#endif
+
+	default:
+		val.f = fpa11->fpreg[Fn].fDouble;
+	}
+
+#ifdef __ARMEB__
+	put_user(val.i[0], &pMem[0]);	/* msw */
+	put_user(val.i[1], &pMem[1]);	/* lsw */
+#else
+	put_user(val.i[1], &pMem[0]);	/* msw */
+	put_user(val.i[0], &pMem[1]);	/* lsw */
+#endif
+}
+
+#ifdef CONFIG_FPE_NWFPE_XP
+static inline void storeExtended(const unsigned int Fn, unsigned int __user *pMem)
+{
+	FPA11 *fpa11 = GET_FPA11();
+	union {
+		floatx80 f;
+		unsigned int i[3];
+	} val;
+
+	switch (fpa11->fType[Fn]) {
+	case typeSingle:
+		val.f = float32_to_floatx80(fpa11->fpreg[Fn].fSingle);
+		break;
+
+	case typeDouble:
+		val.f = float64_to_floatx80(fpa11->fpreg[Fn].fDouble);
+		break;
+
+	default:
+		val.f = fpa11->fpreg[Fn].fExtended;
+	}
+
+	put_user(val.i[0], &pMem[0]);	/* sign & exp */
+#ifdef __ARMEB__
+	put_user(val.i[1], &pMem[1]);	/* msw */
+	put_user(val.i[2], &pMem[2]);
+#else
+	put_user(val.i[1], &pMem[2]);
+	put_user(val.i[2], &pMem[1]);	/* msw */
+#endif
+}
+#endif
+
+static inline void storeMultiple(const unsigned int Fn, unsigned int __user *pMem)
+{
+	FPA11 *fpa11 = GET_FPA11();
+	register unsigned int nType, *p;
+
+	p = (unsigned int *) &(fpa11->fpreg[Fn]);
+	nType = fpa11->fType[Fn];
+
+	switch (nType) {
+	case typeSingle:
+	case typeDouble:
+		{
+			put_user(p[0], &pMem[2]);	/* single */
+			put_user(p[1], &pMem[1]);	/* double msw */
+			put_user(nType << 14, &pMem[0]);
+		}
+		break;
+
+#ifdef CONFIG_FPE_NWFPE_XP
+	case typeExtended:
+		{
+			put_user(p[2], &pMem[1]);	/* msw */
+			put_user(p[1], &pMem[2]);
+			put_user((p[0] & 0x80003fff) | (nType << 14), &pMem[0]);
+		}
+		break;
+#endif
+	}
+}
+
+unsigned int PerformLDF(const unsigned int opcode)
+{
+	unsigned int __user *pBase, *pAddress, *pFinal;
+	unsigned int nRc = 1, write_back = WRITE_BACK(opcode);
+
+	pBase = (unsigned int __user *) readRegister(getRn(opcode));
+	if (REG_PC == getRn(opcode)) {
+		pBase += 2;
+		write_back = 0;
+	}
+
+	pFinal = pBase;
+	if (BIT_UP_SET(opcode))
+		pFinal += getOffset(opcode);
+	else
+		pFinal -= getOffset(opcode);
+
+	if (PREINDEXED(opcode))
+		pAddress = pFinal;
+	else
+		pAddress = pBase;
+
+	switch (opcode & MASK_TRANSFER_LENGTH) {
+	case TRANSFER_SINGLE:
+		loadSingle(getFd(opcode), pAddress);
+		break;
+	case TRANSFER_DOUBLE:
+		loadDouble(getFd(opcode), pAddress);
+		break;
+#ifdef CONFIG_FPE_NWFPE_XP
+	case TRANSFER_EXTENDED:
+		loadExtended(getFd(opcode), pAddress);
+		break;
+#endif
+	default:
+		nRc = 0;
+	}
+
+	if (write_back)
+		writeRegister(getRn(opcode), (unsigned long) pFinal);
+	return nRc;
+}
+
+unsigned int PerformSTF(const unsigned int opcode)
+{
+	unsigned int __user *pBase, *pAddress, *pFinal;
+	unsigned int nRc = 1, write_back = WRITE_BACK(opcode);
+	struct roundingData roundData;
+
+	roundData.mode = SetRoundingMode(opcode);
+	roundData.precision = SetRoundingPrecision(opcode);
+	roundData.exception = 0;
+
+	pBase = (unsigned int __user *) readRegister(getRn(opcode));
+	if (REG_PC == getRn(opcode)) {
+		pBase += 2;
+		write_back = 0;
+	}
+
+	pFinal = pBase;
+	if (BIT_UP_SET(opcode))
+		pFinal += getOffset(opcode);
+	else
+		pFinal -= getOffset(opcode);
+
+	if (PREINDEXED(opcode))
+		pAddress = pFinal;
+	else
+		pAddress = pBase;
+
+	switch (opcode & MASK_TRANSFER_LENGTH) {
+	case TRANSFER_SINGLE:
+		storeSingle(&roundData, getFd(opcode), pAddress);
+		break;
+	case TRANSFER_DOUBLE:
+		storeDouble(&roundData, getFd(opcode), pAddress);
+		break;
+#ifdef CONFIG_FPE_NWFPE_XP
+	case TRANSFER_EXTENDED:
+		storeExtended(getFd(opcode), pAddress);
+		break;
+#endif
+	default:
+		nRc = 0;
+	}
+
+	if (roundData.exception)
+		float_raise(roundData.exception);
+
+	if (write_back)
+		writeRegister(getRn(opcode), (unsigned long) pFinal);
+	return nRc;
+}
+
+unsigned int PerformLFM(const unsigned int opcode)
+{
+	unsigned int __user *pBase, *pAddress, *pFinal;
+	unsigned int i, Fd, write_back = WRITE_BACK(opcode);
+
+	pBase = (unsigned int __user *) readRegister(getRn(opcode));
+	if (REG_PC == getRn(opcode)) {
+		pBase += 2;
+		write_back = 0;
+	}
+
+	pFinal = pBase;
+	if (BIT_UP_SET(opcode))
+		pFinal += getOffset(opcode);
+	else
+		pFinal -= getOffset(opcode);
+
+	if (PREINDEXED(opcode))
+		pAddress = pFinal;
+	else
+		pAddress = pBase;
+
+	Fd = getFd(opcode);
+	for (i = getRegisterCount(opcode); i > 0; i--) {
+		loadMultiple(Fd, pAddress);
+		pAddress += 3;
+		Fd++;
+		if (Fd == 8)
+			Fd = 0;
+	}
+
+	if (write_back)
+		writeRegister(getRn(opcode), (unsigned long) pFinal);
+	return 1;
+}
+
+unsigned int PerformSFM(const unsigned int opcode)
+{
+	unsigned int __user *pBase, *pAddress, *pFinal;
+	unsigned int i, Fd, write_back = WRITE_BACK(opcode);
+
+	pBase = (unsigned int __user *) readRegister(getRn(opcode));
+	if (REG_PC == getRn(opcode)) {
+		pBase += 2;
+		write_back = 0;
+	}
+
+	pFinal = pBase;
+	if (BIT_UP_SET(opcode))
+		pFinal += getOffset(opcode);
+	else
+		pFinal -= getOffset(opcode);
+
+	if (PREINDEXED(opcode))
+		pAddress = pFinal;
+	else
+		pAddress = pBase;
+
+	Fd = getFd(opcode);
+	for (i = getRegisterCount(opcode); i > 0; i--) {
+		storeMultiple(Fd, pAddress);
+		pAddress += 3;
+		Fd++;
+		if (Fd == 8)
+			Fd = 0;
+	}
+
+	if (write_back)
+		writeRegister(getRn(opcode), (unsigned long) pFinal);
+	return 1;
+}
+
+unsigned int EmulateCPDT(const unsigned int opcode)
+{
+	unsigned int nRc = 0;
+
+	if (LDF_OP(opcode)) {
+		nRc = PerformLDF(opcode);
+	} else if (LFM_OP(opcode)) {
+		nRc = PerformLFM(opcode);
+	} else if (STF_OP(opcode)) {
+		nRc = PerformSTF(opcode);
+	} else if (SFM_OP(opcode)) {
+		nRc = PerformSFM(opcode);
+	} else {
+		nRc = 0;
+	}
+
+	return nRc;
+}
diff --git a/arch/arm/nwfpe/fpa11_cprt.c b/arch/arm/nwfpe/fpa11_cprt.c
new file mode 100644
index 000000000..31c4eeec1
--- /dev/null
+++ b/arch/arm/nwfpe/fpa11_cprt.c
@@ -0,0 +1,373 @@
+/*
+    NetWinder Floating Point Emulator
+    (c) Rebel.COM, 1998,1999
+    (c) Philip Blundell, 1999, 2001
+
+    Direct questions, comments to Scott Bambrough <scottb@netwinder.org>
+
+    This program is free software; you can redistribute it and/or modify
+    it under the terms of the GNU General Public License as published by
+    the Free Software Foundation; either version 2 of the License, or
+    (at your option) any later version.
+
+    This program is distributed in the hope that it will be useful,
+    but WITHOUT ANY WARRANTY; without even the implied warranty of
+    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+    GNU General Public License for more details.
+
+    You should have received a copy of the GNU General Public License
+    along with this program; if not, write to the Free Software
+    Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+*/
+
+#include "fpa11.h"
+#include "fpopcode.h"
+#include "fpa11.inl"
+#include "fpmodule.h"
+#include "fpmodule.inl"
+#include "softfloat.h"
+
+unsigned int PerformFLT(const unsigned int opcode);
+unsigned int PerformFIX(const unsigned int opcode);
+
+static unsigned int PerformComparison(const unsigned int opcode);
+
+unsigned int EmulateCPRT(const unsigned int opcode)
+{
+
+	if (opcode & 0x800000) {
+		/* This is some variant of a comparison (PerformComparison
+		   will sort out which one).  Since most of the other CPRT
+		   instructions are oddball cases of some sort or other it
+		   makes sense to pull this out into a fast path.  */
+		return PerformComparison(opcode);
+	}
+
+	/* Hint to GCC that we'd like a jump table rather than a load of CMPs */
+	switch ((opcode & 0x700000) >> 20) {
+	case FLT_CODE >> 20:
+		return PerformFLT(opcode);
+		break;
+	case FIX_CODE >> 20:
+		return PerformFIX(opcode);
+		break;
+
+	case WFS_CODE >> 20:
+		writeFPSR(readRegister(getRd(opcode)));
+		break;
+	case RFS_CODE >> 20:
+		writeRegister(getRd(opcode), readFPSR());
+		break;
+
+	default:
+		return 0;
+	}
+
+	return 1;
+}
+
+unsigned int PerformFLT(const unsigned int opcode)
+{
+	FPA11 *fpa11 = GET_FPA11();
+	struct roundingData roundData;
+
+	roundData.mode = SetRoundingMode(opcode);
+	roundData.precision = SetRoundingPrecision(opcode);
+	roundData.exception = 0;
+
+	switch (opcode & MASK_ROUNDING_PRECISION) {
+	case ROUND_SINGLE:
+		{
+			fpa11->fType[getFn(opcode)] = typeSingle;
+			fpa11->fpreg[getFn(opcode)].fSingle = int32_to_float32(&roundData, readRegister(getRd(opcode)));
+		}
+		break;
+
+	case ROUND_DOUBLE:
+		{
+			fpa11->fType[getFn(opcode)] = typeDouble;
+			fpa11->fpreg[getFn(opcode)].fDouble = int32_to_float64(readRegister(getRd(opcode)));
+		}
+		break;
+
+#ifdef CONFIG_FPE_NWFPE_XP
+	case ROUND_EXTENDED:
+		{
+			fpa11->fType[getFn(opcode)] = typeExtended;
+			fpa11->fpreg[getFn(opcode)].fExtended = int32_to_floatx80(readRegister(getRd(opcode)));
+		}
+		break;
+#endif
+
+	default:
+		return 0;
+	}
+
+	if (roundData.exception)
+		float_raise(roundData.exception);
+
+	return 1;
+}
+
+unsigned int PerformFIX(const unsigned int opcode)
+{
+	FPA11 *fpa11 = GET_FPA11();
+	unsigned int Fn = getFm(opcode);
+	struct roundingData roundData;
+
+	roundData.mode = SetRoundingMode(opcode);
+	roundData.precision = SetRoundingPrecision(opcode);
+	roundData.exception = 0;
+
+	switch (fpa11->fType[Fn]) {
+	case typeSingle:
+		{
+			writeRegister(getRd(opcode), float32_to_int32(&roundData, fpa11->fpreg[Fn].fSingle));
+		}
+		break;
+
+	case typeDouble:
+		{
+			writeRegister(getRd(opcode), float64_to_int32(&roundData, fpa11->fpreg[Fn].fDouble));
+		}
+		break;
+
+#ifdef CONFIG_FPE_NWFPE_XP
+	case typeExtended:
+		{
+			writeRegister(getRd(opcode), floatx80_to_int32(&roundData, fpa11->fpreg[Fn].fExtended));
+		}
+		break;
+#endif
+
+	default:
+		return 0;
+	}
+
+	if (roundData.exception)
+		float_raise(roundData.exception);
+
+	return 1;
+}
+
+/* This instruction sets the flags N, Z, C, V in the FPSR. */
+static unsigned int PerformComparison(const unsigned int opcode)
+{
+	FPA11 *fpa11 = GET_FPA11();
+	unsigned int Fn = getFn(opcode), Fm = getFm(opcode);
+	int e_flag = opcode & 0x400000;	/* 1 if CxFE */
+	int n_flag = opcode & 0x200000;	/* 1 if CNxx */
+	unsigned int flags = 0;
+
+#ifdef CONFIG_FPE_NWFPE_XP
+	floatx80 rFn, rFm;
+
+	/* Check for unordered condition and convert all operands to 80-bit
+	   format.
+	   ?? Might be some mileage in avoiding this conversion if possible.
+	   Eg, if both operands are 32-bit, detect this and do a 32-bit
+	   comparison (cheaper than an 80-bit one).  */
+	switch (fpa11->fType[Fn]) {
+	case typeSingle:
+		//printk("single.\n");
+		if (float32_is_nan(fpa11->fpreg[Fn].fSingle))
+			goto unordered;
+		rFn = float32_to_floatx80(fpa11->fpreg[Fn].fSingle);
+		break;
+
+	case typeDouble:
+		//printk("double.\n");
+		if (float64_is_nan(fpa11->fpreg[Fn].fDouble))
+			goto unordered;
+		rFn = float64_to_floatx80(fpa11->fpreg[Fn].fDouble);
+		break;
+
+	case typeExtended:
+		//printk("extended.\n");
+		if (floatx80_is_nan(fpa11->fpreg[Fn].fExtended))
+			goto unordered;
+		rFn = fpa11->fpreg[Fn].fExtended;
+		break;
+
+	default:
+		return 0;
+	}
+
+	if (CONSTANT_FM(opcode)) {
+		//printk("Fm is a constant: #%d.\n",Fm);
+		rFm = getExtendedConstant(Fm);
+		if (floatx80_is_nan(rFm))
+			goto unordered;
+	} else {
+		//printk("Fm = r%d which contains a ",Fm);
+		switch (fpa11->fType[Fm]) {
+		case typeSingle:
+			//printk("single.\n");
+			if (float32_is_nan(fpa11->fpreg[Fm].fSingle))
+				goto unordered;
+			rFm = float32_to_floatx80(fpa11->fpreg[Fm].fSingle);
+			break;
+
+		case typeDouble:
+			//printk("double.\n");
+			if (float64_is_nan(fpa11->fpreg[Fm].fDouble))
+				goto unordered;
+			rFm = float64_to_floatx80(fpa11->fpreg[Fm].fDouble);
+			break;
+
+		case typeExtended:
+			//printk("extended.\n");
+			if (floatx80_is_nan(fpa11->fpreg[Fm].fExtended))
+				goto unordered;
+			rFm = fpa11->fpreg[Fm].fExtended;
+			break;
+
+		default:
+			return 0;
+		}
+	}
+
+	if (n_flag)
+		rFm.high ^= 0x8000;
+
+	/* test for less than condition */
+	if (floatx80_lt(rFn, rFm))
+		flags |= CC_NEGATIVE;
+
+	/* test for equal condition */
+	if (floatx80_eq(rFn, rFm))
+		flags |= CC_ZERO;
+
+	/* test for greater than or equal condition */
+	if (floatx80_lt(rFm, rFn))
+		flags |= CC_CARRY;
+
+#else
+	if (CONSTANT_FM(opcode)) {
+		/* Fm is a constant.  Do the comparison in whatever precision
+		   Fn happens to be stored in.  */
+		if (fpa11->fType[Fn] == typeSingle) {
+			float32 rFm = getSingleConstant(Fm);
+			float32 rFn = fpa11->fpreg[Fn].fSingle;
+
+			if (float32_is_nan(rFn))
+				goto unordered;
+
+			if (n_flag)
+				rFm ^= 0x80000000;
+
+			/* test for less than condition */
+			if (float32_lt_nocheck(rFn, rFm))
+				flags |= CC_NEGATIVE;
+
+			/* test for equal condition */
+			if (float32_eq_nocheck(rFn, rFm))
+				flags |= CC_ZERO;
+
+			/* test for greater than or equal condition */
+			if (float32_lt_nocheck(rFm, rFn))
+				flags |= CC_CARRY;
+		} else {
+			float64 rFm = getDoubleConstant(Fm);
+			float64 rFn = fpa11->fpreg[Fn].fDouble;
+
+			if (float64_is_nan(rFn))
+				goto unordered;
+
+			if (n_flag)
+				rFm ^= 0x8000000000000000ULL;
+
+			/* test for less than condition */
+			if (float64_lt_nocheck(rFn, rFm))
+				flags |= CC_NEGATIVE;
+
+			/* test for equal condition */
+			if (float64_eq_nocheck(rFn, rFm))
+				flags |= CC_ZERO;
+
+			/* test for greater than or equal condition */
+			if (float64_lt_nocheck(rFm, rFn))
+				flags |= CC_CARRY;
+		}
+	} else {
+		/* Both operands are in registers.  */
+		if (fpa11->fType[Fn] == typeSingle
+		    && fpa11->fType[Fm] == typeSingle) {
+			float32 rFm = fpa11->fpreg[Fm].fSingle;
+			float32 rFn = fpa11->fpreg[Fn].fSingle;
+
+			if (float32_is_nan(rFn)
+			    || float32_is_nan(rFm))
+				goto unordered;
+
+			if (n_flag)
+				rFm ^= 0x80000000;
+
+			/* test for less than condition */
+			if (float32_lt_nocheck(rFn, rFm))
+				flags |= CC_NEGATIVE;
+
+			/* test for equal condition */
+			if (float32_eq_nocheck(rFn, rFm))
+				flags |= CC_ZERO;
+
+			/* test for greater than or equal condition */
+			if (float32_lt_nocheck(rFm, rFn))
+				flags |= CC_CARRY;
+		} else {
+			/* Promote 32-bit operand to 64 bits.  */
+			float64 rFm, rFn;
+
+			rFm = (fpa11->fType[Fm] == typeSingle) ?
+			    float32_to_float64(fpa11->fpreg[Fm].fSingle)
+			    : fpa11->fpreg[Fm].fDouble;
+
+			rFn = (fpa11->fType[Fn] == typeSingle) ?
+			    float32_to_float64(fpa11->fpreg[Fn].fSingle)
+			    : fpa11->fpreg[Fn].fDouble;
+
+			if (float64_is_nan(rFn)
+			    || float64_is_nan(rFm))
+				goto unordered;
+
+			if (n_flag)
+				rFm ^= 0x8000000000000000ULL;
+
+			/* test for less than condition */
+			if (float64_lt_nocheck(rFn, rFm))
+				flags |= CC_NEGATIVE;
+
+			/* test for equal condition */
+			if (float64_eq_nocheck(rFn, rFm))
+				flags |= CC_ZERO;
+
+			/* test for greater than or equal condition */
+			if (float64_lt_nocheck(rFm, rFn))
+				flags |= CC_CARRY;
+		}
+	}
+
+#endif
+
+	writeConditionCodes(flags);
+
+	return 1;
+
+      unordered:
+	/* ?? The FPA data sheet is pretty vague about this, in particular
+	   about whether the non-E comparisons can ever raise exceptions.
+	   This implementation is based on a combination of what it says in
+	   the data sheet, observation of how the Acorn emulator actually
+	   behaves (and how programs expect it to) and guesswork.  */
+	flags |= CC_OVERFLOW;
+	flags &= ~(CC_ZERO | CC_NEGATIVE);
+
+	if (BIT_AC & readFPSR())
+		flags |= CC_CARRY;
+
+	if (e_flag)
+		float_raise(float_flag_invalid);
+
+	writeConditionCodes(flags);
+	return 1;
+}
diff --git a/arch/arm/nwfpe/fpmodule.c b/arch/arm/nwfpe/fpmodule.c
new file mode 100644
index 000000000..ec717c190
--- /dev/null
+++ b/arch/arm/nwfpe/fpmodule.c
@@ -0,0 +1,190 @@
+
+/*
+    NetWinder Floating Point Emulator
+    (c) Rebel.com, 1998-1999
+    (c) Philip Blundell, 1998-1999
+
+    Direct questions, comments to Scott Bambrough <scottb@netwinder.org>
+
+    This program is free software; you can redistribute it and/or modify
+    it under the terms of the GNU General Public License as published by
+    the Free Software Foundation; either version 2 of the License, or
+    (at your option) any later version.
+
+    This program is distributed in the hope that it will be useful,
+    but WITHOUT ANY WARRANTY; without even the implied warranty of
+    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+    GNU General Public License for more details.
+
+    You should have received a copy of the GNU General Public License
+    along with this program; if not, write to the Free Software
+    Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+*/
+
+#include "fpa11.h"
+
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+
+/* XXX */
+#include <linux/errno.h>
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <linux/signal.h>
+#include <linux/sched.h>
+#include <linux/init.h>
+
+#include <asm/thread_notify.h>
+
+#include "softfloat.h"
+#include "fpopcode.h"
+#include "fpmodule.h"
+#include "fpa11.inl"
+
+/* kernel symbols required for signal handling */
+#ifdef CONFIG_FPE_NWFPE_XP
+#define NWFPE_BITS "extended"
+#else
+#define NWFPE_BITS "double"
+#endif
+
+#ifdef MODULE
+void fp_send_sig(unsigned long sig, struct task_struct *p, int priv);
+#else
+#define fp_send_sig	send_sig
+#define kern_fp_enter	fp_enter
+
+extern char fpe_type[];
+#endif
+
+static int nwfpe_notify(struct notifier_block *self, unsigned long cmd, void *v)
+{
+	struct thread_info *thread = v;
+
+	if (cmd == THREAD_NOTIFY_FLUSH)
+		nwfpe_init_fpa(&thread->fpstate);
+
+	return NOTIFY_DONE;
+}
+
+static struct notifier_block nwfpe_notifier_block = {
+	.notifier_call = nwfpe_notify,
+};
+
+/* kernel function prototypes required */
+void fp_setup(void);
+
+/* external declarations for saved kernel symbols */
+extern void (*kern_fp_enter)(void);
+
+/* Original value of fp_enter from kernel before patched by fpe_init. */
+static void (*orig_fp_enter)(void);
+
+/* forward declarations */
+extern void nwfpe_enter(void);
+
+static int __init fpe_init(void)
+{
+	if (sizeof(FPA11) > sizeof(union fp_state)) {
+		pr_err("nwfpe: bad structure size\n");
+		return -EINVAL;
+	}
+
+	if (sizeof(FPREG) != 12) {
+		pr_err("nwfpe: bad register size\n");
+		return -EINVAL;
+	}
+	if (fpe_type[0] && strcmp(fpe_type, "nwfpe"))
+		return 0;
+
+	/* Display title, version and copyright information. */
+	pr_info("NetWinder Floating Point Emulator V0.97 ("
+	        NWFPE_BITS " precision)\n");
+
+	thread_register_notifier(&nwfpe_notifier_block);
+
+	/* Save pointer to the old FP handler and then patch ourselves in */
+	orig_fp_enter = kern_fp_enter;
+	kern_fp_enter = nwfpe_enter;
+
+	return 0;
+}
+
+static void __exit fpe_exit(void)
+{
+	thread_unregister_notifier(&nwfpe_notifier_block);
+	/* Restore the values we saved earlier. */
+	kern_fp_enter = orig_fp_enter;
+}
+
+/*
+ScottB:  November 4, 1998
+
+Moved this function out of softfloat-specialize into fpmodule.c.
+This effectively isolates all the changes required for integrating with the
+Linux kernel into fpmodule.c.  Porting to NetBSD should only require modifying
+fpmodule.c to integrate with the NetBSD kernel (I hope!).
+
+[1/1/99: Not quite true any more unfortunately.  There is Linux-specific
+code to access data in user space in some other source files at the 
+moment (grep for get_user / put_user calls).  --philb]
+
+This function is called by the SoftFloat routines to raise a floating
+point exception.  We check the trap enable byte in the FPSR, and raise
+a SIGFPE exception if necessary.  If not the relevant bits in the 
+cumulative exceptions flag byte are set and we return.
+*/
+
+#ifdef CONFIG_DEBUG_USER
+/* By default, ignore inexact errors as there are far too many of them to log */
+static int debug = ~BIT_IXC;
+#endif
+
+void float_raise(signed char flags)
+{
+	register unsigned int fpsr, cumulativeTraps;
+
+#ifdef CONFIG_DEBUG_USER
+	if (flags & debug)
+ 		printk(KERN_DEBUG
+		       "NWFPE: %s[%d] takes exception %08x at %pf from %08lx\n",
+		       current->comm, current->pid, flags,
+		       __builtin_return_address(0), GET_USERREG()->ARM_pc);
+#endif
+
+	/* Read fpsr and initialize the cumulativeTraps.  */
+	fpsr = readFPSR();
+	cumulativeTraps = 0;
+
+	/* For each type of exception, the cumulative trap exception bit is only
+	   set if the corresponding trap enable bit is not set.  */
+	if ((!(fpsr & BIT_IXE)) && (flags & BIT_IXC))
+		cumulativeTraps |= BIT_IXC;
+	if ((!(fpsr & BIT_UFE)) && (flags & BIT_UFC))
+		cumulativeTraps |= BIT_UFC;
+	if ((!(fpsr & BIT_OFE)) && (flags & BIT_OFC))
+		cumulativeTraps |= BIT_OFC;
+	if ((!(fpsr & BIT_DZE)) && (flags & BIT_DZC))
+		cumulativeTraps |= BIT_DZC;
+	if ((!(fpsr & BIT_IOE)) && (flags & BIT_IOC))
+		cumulativeTraps |= BIT_IOC;
+
+	/* Set the cumulative exceptions flags.  */
+	if (cumulativeTraps)
+		writeFPSR(fpsr | cumulativeTraps);
+
+	/* Raise an exception if necessary.  */
+	if (fpsr & (flags << 16))
+		fp_send_sig(SIGFPE, current, 1);
+}
+
+module_init(fpe_init);
+module_exit(fpe_exit);
+
+MODULE_AUTHOR("Scott Bambrough <scottb@rebel.com>");
+MODULE_DESCRIPTION("NWFPE floating point emulator (" NWFPE_BITS " precision)");
+MODULE_LICENSE("GPL");
+
+#ifdef CONFIG_DEBUG_USER
+module_param(debug, int, 0644);
+#endif
diff --git a/arch/arm/nwfpe/fpmodule.h b/arch/arm/nwfpe/fpmodule.h
new file mode 100644
index 000000000..5c2e8e485
--- /dev/null
+++ b/arch/arm/nwfpe/fpmodule.h
@@ -0,0 +1,47 @@
+/*
+    NetWinder Floating Point Emulator
+    (c) Rebel.com, 1998-1999
+
+    Direct questions, comments to Scott Bambrough <scottb@netwinder.org>
+
+    This program is free software; you can redistribute it and/or modify
+    it under the terms of the GNU General Public License as published by
+    the Free Software Foundation; either version 2 of the License, or
+    (at your option) any later version.
+
+    This program is distributed in the hope that it will be useful,
+    but WITHOUT ANY WARRANTY; without even the implied warranty of
+    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+    GNU General Public License for more details.
+
+    You should have received a copy of the GNU General Public License
+    along with this program; if not, write to the Free Software
+    Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+
+    27/03/03 Ian Molton Clean up CONFIG_CPU
+*/
+
+#ifndef __FPMODULE_H__
+#define __FPMODULE_H__
+
+#define REG_ORIG_R0	17
+#define REG_CPSR	16
+#define REG_PC		15
+#define REG_LR		14
+#define REG_SP		13
+#define REG_IP		12
+#define REG_FP		11
+#define REG_R10		10
+#define REG_R9		9
+#define REG_R9		9
+#define REG_R8		8
+#define REG_R7		7
+#define REG_R6		6
+#define REG_R5		5
+#define REG_R4		4
+#define REG_R3		3
+#define REG_R2		2
+#define REG_R1		1
+#define REG_R0		0
+
+#endif
diff --git a/arch/arm/nwfpe/fpmodule.inl b/arch/arm/nwfpe/fpmodule.inl
new file mode 100644
index 000000000..2c39ad408
--- /dev/null
+++ b/arch/arm/nwfpe/fpmodule.inl
@@ -0,0 +1,74 @@
+/*
+    NetWinder Floating Point Emulator
+    (c) Rebel.COM, 1998,1999
+
+    Direct questions, comments to Scott Bambrough <scottb@netwinder.org>
+
+    This program is free software; you can redistribute it and/or modify
+    it under the terms of the GNU General Public License as published by
+    the Free Software Foundation; either version 2 of the License, or
+    (at your option) any later version.
+
+    This program is distributed in the hope that it will be useful,
+    but WITHOUT ANY WARRANTY; without even the implied warranty of
+    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+    GNU General Public License for more details.
+
+    You should have received a copy of the GNU General Public License
+    along with this program; if not, write to the Free Software
+    Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+*/
+
+static inline unsigned long readRegister(const unsigned int nReg)
+{
+	/* Note: The CPU thinks it has dealt with the current instruction.
+	   As a result the program counter has been advanced to the next
+	   instruction, and points 4 bytes beyond the actual instruction
+	   that caused the invalid instruction trap to occur.  We adjust
+	   for this in this routine.  LDF/STF instructions with Rn = PC
+	   depend on the PC being correct, as they use PC+8 in their
+	   address calculations. */
+	struct pt_regs *regs = GET_USERREG();
+	unsigned int val = regs->uregs[nReg];
+	if (REG_PC == nReg)
+		val -= 4;
+	return val;
+}
+
+static inline void
+writeRegister(const unsigned int nReg, const unsigned long val)
+{
+	struct pt_regs *regs = GET_USERREG();
+	regs->uregs[nReg] = val;
+}
+
+static inline unsigned long readCPSR(void)
+{
+	return (readRegister(REG_CPSR));
+}
+
+static inline void writeCPSR(const unsigned long val)
+{
+	writeRegister(REG_CPSR, val);
+}
+
+static inline unsigned long readConditionCodes(void)
+{
+#ifdef __FPEM_TEST__
+	return (0);
+#else
+	return (readCPSR() & CC_MASK);
+#endif
+}
+
+static inline void writeConditionCodes(const unsigned long val)
+{
+	struct pt_regs *regs = GET_USERREG();
+	unsigned long rval;
+	/*
+	 * Operate directly on userRegisters since
+	 * the CPSR may be the PC register itself.
+	 */
+	rval = regs->ARM_cpsr & ~CC_MASK;
+	regs->ARM_cpsr = rval | (val & CC_MASK);
+}
diff --git a/arch/arm/nwfpe/fpopcode.c b/arch/arm/nwfpe/fpopcode.c
new file mode 100644
index 000000000..ff9834673
--- /dev/null
+++ b/arch/arm/nwfpe/fpopcode.c
@@ -0,0 +1,63 @@
+/*
+    NetWinder Floating Point Emulator
+    (c) Rebel.COM, 1998,1999
+
+    Direct questions, comments to Scott Bambrough <scottb@netwinder.org>
+
+    This program is free software; you can redistribute it and/or modify
+    it under the terms of the GNU General Public License as published by
+    the Free Software Foundation; either version 2 of the License, or
+    (at your option) any later version.
+
+    This program is distributed in the hope that it will be useful,
+    but WITHOUT ANY WARRANTY; without even the implied warranty of
+    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+    GNU General Public License for more details.
+
+    You should have received a copy of the GNU General Public License
+    along with this program; if not, write to the Free Software
+    Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+*/
+
+#include "fpa11.h"
+#include "softfloat.h"
+#include "fpopcode.h"
+#include "fpsr.h"
+#include "fpmodule.h"
+#include "fpmodule.inl"
+
+#ifdef CONFIG_FPE_NWFPE_XP
+const floatx80 floatx80Constant[] = {
+	{ .high = 0x0000, .low = 0x0000000000000000ULL},/* extended 0.0 */
+	{ .high = 0x3fff, .low = 0x8000000000000000ULL},/* extended 1.0 */
+	{ .high = 0x4000, .low = 0x8000000000000000ULL},/* extended 2.0 */
+	{ .high = 0x4000, .low = 0xc000000000000000ULL},/* extended 3.0 */
+	{ .high = 0x4001, .low = 0x8000000000000000ULL},/* extended 4.0 */
+	{ .high = 0x4001, .low = 0xa000000000000000ULL},/* extended 5.0 */
+	{ .high = 0x3ffe, .low = 0x8000000000000000ULL},/* extended 0.5 */
+	{ .high = 0x4002, .low = 0xa000000000000000ULL},/* extended 10.0 */
+};
+#endif
+
+const float64 float64Constant[] = {
+	0x0000000000000000ULL,	/* double 0.0 */
+	0x3ff0000000000000ULL,	/* double 1.0 */
+	0x4000000000000000ULL,	/* double 2.0 */
+	0x4008000000000000ULL,	/* double 3.0 */
+	0x4010000000000000ULL,	/* double 4.0 */
+	0x4014000000000000ULL,	/* double 5.0 */
+	0x3fe0000000000000ULL,	/* double 0.5 */
+	0x4024000000000000ULL	/* double 10.0 */
+};
+
+const float32 float32Constant[] = {
+	0x00000000,		/* single 0.0 */
+	0x3f800000,		/* single 1.0 */
+	0x40000000,		/* single 2.0 */
+	0x40400000,		/* single 3.0 */
+	0x40800000,		/* single 4.0 */
+	0x40a00000,		/* single 5.0 */
+	0x3f000000,		/* single 0.5 */
+	0x41200000		/* single 10.0 */
+};
+
diff --git a/arch/arm/nwfpe/fpopcode.h b/arch/arm/nwfpe/fpopcode.h
new file mode 100644
index 000000000..78f02dbfa
--- /dev/null
+++ b/arch/arm/nwfpe/fpopcode.h
@@ -0,0 +1,481 @@
+/*
+    NetWinder Floating Point Emulator
+    (c) Rebel.COM, 1998,1999
+    (c) Philip Blundell, 2001
+
+    Direct questions, comments to Scott Bambrough <scottb@netwinder.org>
+
+    This program is free software; you can redistribute it and/or modify
+    it under the terms of the GNU General Public License as published by
+    the Free Software Foundation; either version 2 of the License, or
+    (at your option) any later version.
+
+    This program is distributed in the hope that it will be useful,
+    but WITHOUT ANY WARRANTY; without even the implied warranty of
+    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+    GNU General Public License for more details.
+
+    You should have received a copy of the GNU General Public License
+    along with this program; if not, write to the Free Software
+    Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+*/
+
+#ifndef __FPOPCODE_H__
+#define __FPOPCODE_H__
+
+
+/*
+ARM Floating Point Instruction Classes
+| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | 
+|c o n d|1 1 0 P|U|u|W|L|   Rn  |v|  Fd |0|0|0|1|  o f f s e t  | CPDT
+|c o n d|1 1 0 P|U|w|W|L|   Rn  |x|  Fd |0|0|1|0|  o f f s e t  | CPDT (copro 2)
+| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | 
+|c o n d|1 1 1 0|a|b|c|d|e|  Fn |j|  Fd |0|0|0|1|f|g|h|0|i|  Fm | CPDO
+|c o n d|1 1 1 0|a|b|c|L|e|  Fn |   Rd  |0|0|0|1|f|g|h|1|i|  Fm | CPRT
+|c o n d|1 1 1 0|a|b|c|1|e|  Fn |1|1|1|1|0|0|0|1|f|g|h|1|i|  Fm | comparisons
+| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | 
+
+CPDT		data transfer instructions
+		LDF, STF, LFM (copro 2), SFM (copro 2)
+		
+CPDO		dyadic arithmetic instructions
+		ADF, MUF, SUF, RSF, DVF, RDF,
+		POW, RPW, RMF, FML, FDV, FRD, POL
+
+CPDO		monadic arithmetic instructions
+		MVF, MNF, ABS, RND, SQT, LOG, LGN, EXP,
+		SIN, COS, TAN, ASN, ACS, ATN, URD, NRM
+		
+CPRT		joint arithmetic/data transfer instructions
+		FIX (arithmetic followed by load/store)
+		FLT (load/store followed by arithmetic)
+		CMF, CNF CMFE, CNFE (comparisons)
+		WFS, RFS (write/read floating point status register)
+		WFC, RFC (write/read floating point control register)
+
+cond		condition codes
+P		pre/post index bit: 0 = postindex, 1 = preindex
+U		up/down bit: 0 = stack grows down, 1 = stack grows up
+W		write back bit: 1 = update base register (Rn)
+L		load/store bit: 0 = store, 1 = load
+Rn		base register
+Rd		destination/source register		
+Fd		floating point destination register
+Fn		floating point source register
+Fm		floating point source register or floating point constant
+
+uv		transfer length (TABLE 1)
+wx		register count (TABLE 2)
+abcd		arithmetic opcode (TABLES 3 & 4)
+ef		destination size (rounding precision) (TABLE 5)
+gh		rounding mode (TABLE 6)
+j		dyadic/monadic bit: 0 = dyadic, 1 = monadic
+i 		constant bit: 1 = constant (TABLE 6)
+*/
+
+/*
+TABLE 1
++-------------------------+---+---+---------+---------+
+|  Precision              | u | v | FPSR.EP | length  |
++-------------------------+---+---+---------+---------+
+| Single                  | 0 | 0 |    x    | 1 words |
+| Double                  | 1 | 1 |    x    | 2 words |
+| Extended                | 1 | 1 |    x    | 3 words |
+| Packed decimal          | 1 | 1 |    0    | 3 words |
+| Expanded packed decimal | 1 | 1 |    1    | 4 words |
++-------------------------+---+---+---------+---------+
+Note: x = don't care
+*/
+
+/*
+TABLE 2
++---+---+---------------------------------+
+| w | x | Number of registers to transfer |
++---+---+---------------------------------+
+| 0 | 1 |  1                              |
+| 1 | 0 |  2                              |
+| 1 | 1 |  3                              |
+| 0 | 0 |  4                              |
++---+---+---------------------------------+
+*/
+
+/*
+TABLE 3: Dyadic Floating Point Opcodes
++---+---+---+---+----------+-----------------------+-----------------------+
+| a | b | c | d | Mnemonic | Description           | Operation             |
++---+---+---+---+----------+-----------------------+-----------------------+
+| 0 | 0 | 0 | 0 | ADF      | Add                   | Fd := Fn + Fm         |
+| 0 | 0 | 0 | 1 | MUF      | Multiply              | Fd := Fn * Fm         |
+| 0 | 0 | 1 | 0 | SUF      | Subtract              | Fd := Fn - Fm         |
+| 0 | 0 | 1 | 1 | RSF      | Reverse subtract      | Fd := Fm - Fn         |
+| 0 | 1 | 0 | 0 | DVF      | Divide                | Fd := Fn / Fm         |
+| 0 | 1 | 0 | 1 | RDF      | Reverse divide        | Fd := Fm / Fn         |
+| 0 | 1 | 1 | 0 | POW      | Power                 | Fd := Fn ^ Fm         |
+| 0 | 1 | 1 | 1 | RPW      | Reverse power         | Fd := Fm ^ Fn         |
+| 1 | 0 | 0 | 0 | RMF      | Remainder             | Fd := IEEE rem(Fn/Fm) |
+| 1 | 0 | 0 | 1 | FML      | Fast Multiply         | Fd := Fn * Fm         |
+| 1 | 0 | 1 | 0 | FDV      | Fast Divide           | Fd := Fn / Fm         |
+| 1 | 0 | 1 | 1 | FRD      | Fast reverse divide   | Fd := Fm / Fn         |
+| 1 | 1 | 0 | 0 | POL      | Polar angle (ArcTan2) | Fd := arctan2(Fn,Fm)  |
+| 1 | 1 | 0 | 1 |          | undefined instruction | trap                  |
+| 1 | 1 | 1 | 0 |          | undefined instruction | trap                  |
+| 1 | 1 | 1 | 1 |          | undefined instruction | trap                  |
++---+---+---+---+----------+-----------------------+-----------------------+
+Note: POW, RPW, POL are deprecated, and are available for backwards
+      compatibility only.
+*/
+
+/*
+TABLE 4: Monadic Floating Point Opcodes
++---+---+---+---+----------+-----------------------+-----------------------+
+| a | b | c | d | Mnemonic | Description           | Operation             |
++---+---+---+---+----------+-----------------------+-----------------------+
+| 0 | 0 | 0 | 0 | MVF      | Move                  | Fd := Fm              |
+| 0 | 0 | 0 | 1 | MNF      | Move negated          | Fd := - Fm            |
+| 0 | 0 | 1 | 0 | ABS      | Absolute value        | Fd := abs(Fm)         |
+| 0 | 0 | 1 | 1 | RND      | Round to integer      | Fd := int(Fm)         |
+| 0 | 1 | 0 | 0 | SQT      | Square root           | Fd := sqrt(Fm)        |
+| 0 | 1 | 0 | 1 | LOG      | Log base 10           | Fd := log10(Fm)       |
+| 0 | 1 | 1 | 0 | LGN      | Log base e            | Fd := ln(Fm)          |
+| 0 | 1 | 1 | 1 | EXP      | Exponent              | Fd := e ^ Fm          |
+| 1 | 0 | 0 | 0 | SIN      | Sine                  | Fd := sin(Fm)         |
+| 1 | 0 | 0 | 1 | COS      | Cosine                | Fd := cos(Fm)         |
+| 1 | 0 | 1 | 0 | TAN      | Tangent               | Fd := tan(Fm)         |
+| 1 | 0 | 1 | 1 | ASN      | Arc Sine              | Fd := arcsin(Fm)      |
+| 1 | 1 | 0 | 0 | ACS      | Arc Cosine            | Fd := arccos(Fm)      |
+| 1 | 1 | 0 | 1 | ATN      | Arc Tangent           | Fd := arctan(Fm)      |
+| 1 | 1 | 1 | 0 | URD      | Unnormalized round    | Fd := int(Fm)         |
+| 1 | 1 | 1 | 1 | NRM      | Normalize             | Fd := norm(Fm)        |
++---+---+---+---+----------+-----------------------+-----------------------+
+Note: LOG, LGN, EXP, SIN, COS, TAN, ASN, ACS, ATN are deprecated, and are
+      available for backwards compatibility only.
+*/
+
+/*
+TABLE 5
++-------------------------+---+---+
+|  Rounding Precision     | e | f |
++-------------------------+---+---+
+| IEEE Single precision   | 0 | 0 |
+| IEEE Double precision   | 0 | 1 |
+| IEEE Extended precision | 1 | 0 |
+| undefined (trap)        | 1 | 1 |
++-------------------------+---+---+
+*/
+
+/*
+TABLE 5
++---------------------------------+---+---+
+|  Rounding Mode                  | g | h |
++---------------------------------+---+---+
+| Round to nearest (default)      | 0 | 0 |
+| Round toward plus infinity      | 0 | 1 |
+| Round toward negative infinity  | 1 | 0 |
+| Round toward zero               | 1 | 1 |
++---------------------------------+---+---+
+*/
+
+/*
+===
+=== Definitions for load and store instructions
+===
+*/
+
+/* bit masks */
+#define BIT_PREINDEX	0x01000000
+#define BIT_UP		0x00800000
+#define BIT_WRITE_BACK	0x00200000
+#define BIT_LOAD	0x00100000
+
+/* masks for load/store */
+#define MASK_CPDT		0x0c000000	/* data processing opcode */
+#define MASK_OFFSET		0x000000ff
+#define MASK_TRANSFER_LENGTH	0x00408000
+#define MASK_REGISTER_COUNT	MASK_TRANSFER_LENGTH
+#define MASK_COPROCESSOR	0x00000f00
+
+/* Tests for transfer length */
+#define TRANSFER_SINGLE		0x00000000
+#define TRANSFER_DOUBLE		0x00008000
+#define TRANSFER_EXTENDED	0x00400000
+#define TRANSFER_PACKED		MASK_TRANSFER_LENGTH
+
+/* Get the coprocessor number from the opcode. */
+#define getCoprocessorNumber(opcode)	((opcode & MASK_COPROCESSOR) >> 8)
+
+/* Get the offset from the opcode. */
+#define getOffset(opcode)		(opcode & MASK_OFFSET)
+
+/* Tests for specific data transfer load/store opcodes. */
+#define TEST_OPCODE(opcode,mask)	(((opcode) & (mask)) == (mask))
+
+#define LOAD_OP(opcode)   TEST_OPCODE((opcode),MASK_CPDT | BIT_LOAD)
+#define STORE_OP(opcode)  ((opcode & (MASK_CPDT | BIT_LOAD)) == MASK_CPDT)
+
+#define LDF_OP(opcode)	(LOAD_OP(opcode) && (getCoprocessorNumber(opcode) == 1))
+#define LFM_OP(opcode)	(LOAD_OP(opcode) && (getCoprocessorNumber(opcode) == 2))
+#define STF_OP(opcode)	(STORE_OP(opcode) && (getCoprocessorNumber(opcode) == 1))
+#define SFM_OP(opcode)	(STORE_OP(opcode) && (getCoprocessorNumber(opcode) == 2))
+
+#define PREINDEXED(opcode)		((opcode & BIT_PREINDEX) != 0)
+#define POSTINDEXED(opcode)		((opcode & BIT_PREINDEX) == 0)
+#define BIT_UP_SET(opcode)		((opcode & BIT_UP) != 0)
+#define BIT_UP_CLEAR(opcode)		((opcode & BIT_DOWN) == 0)
+#define WRITE_BACK(opcode)		((opcode & BIT_WRITE_BACK) != 0)
+#define LOAD(opcode)			((opcode & BIT_LOAD) != 0)
+#define STORE(opcode)			((opcode & BIT_LOAD) == 0)
+
+/*
+===
+=== Definitions for arithmetic instructions
+===
+*/
+/* bit masks */
+#define BIT_MONADIC	0x00008000
+#define BIT_CONSTANT	0x00000008
+
+#define CONSTANT_FM(opcode)		((opcode & BIT_CONSTANT) != 0)
+#define MONADIC_INSTRUCTION(opcode)	((opcode & BIT_MONADIC) != 0)
+
+/* instruction identification masks */
+#define MASK_CPDO		0x0e000000	/* arithmetic opcode */
+#define MASK_ARITHMETIC_OPCODE	0x00f08000
+#define MASK_DESTINATION_SIZE	0x00080080
+
+/* dyadic arithmetic opcodes. */
+#define ADF_CODE	0x00000000
+#define MUF_CODE	0x00100000
+#define SUF_CODE	0x00200000
+#define RSF_CODE	0x00300000
+#define DVF_CODE	0x00400000
+#define RDF_CODE	0x00500000
+#define POW_CODE	0x00600000
+#define RPW_CODE	0x00700000
+#define RMF_CODE	0x00800000
+#define FML_CODE	0x00900000
+#define FDV_CODE	0x00a00000
+#define FRD_CODE	0x00b00000
+#define POL_CODE	0x00c00000
+/* 0x00d00000 is an invalid dyadic arithmetic opcode */
+/* 0x00e00000 is an invalid dyadic arithmetic opcode */
+/* 0x00f00000 is an invalid dyadic arithmetic opcode */
+
+/* monadic arithmetic opcodes. */
+#define MVF_CODE	0x00008000
+#define MNF_CODE	0x00108000
+#define ABS_CODE	0x00208000
+#define RND_CODE	0x00308000
+#define SQT_CODE	0x00408000
+#define LOG_CODE	0x00508000
+#define LGN_CODE	0x00608000
+#define EXP_CODE	0x00708000
+#define SIN_CODE	0x00808000
+#define COS_CODE	0x00908000
+#define TAN_CODE	0x00a08000
+#define ASN_CODE	0x00b08000
+#define ACS_CODE	0x00c08000
+#define ATN_CODE	0x00d08000
+#define URD_CODE	0x00e08000
+#define NRM_CODE	0x00f08000
+
+/*
+===
+=== Definitions for register transfer and comparison instructions
+===
+*/
+
+#define MASK_CPRT		0x0e000010	/* register transfer opcode */
+#define MASK_CPRT_CODE		0x00f00000
+#define FLT_CODE		0x00000000
+#define FIX_CODE		0x00100000
+#define WFS_CODE		0x00200000
+#define RFS_CODE		0x00300000
+#define WFC_CODE		0x00400000
+#define RFC_CODE		0x00500000
+#define CMF_CODE		0x00900000
+#define CNF_CODE		0x00b00000
+#define CMFE_CODE		0x00d00000
+#define CNFE_CODE		0x00f00000
+
+/*
+===
+=== Common definitions
+===
+*/
+
+/* register masks */
+#define MASK_Rd		0x0000f000
+#define MASK_Rn		0x000f0000
+#define MASK_Fd		0x00007000
+#define MASK_Fm		0x00000007
+#define MASK_Fn		0x00070000
+
+/* condition code masks */
+#define CC_MASK		0xf0000000
+#define CC_NEGATIVE	0x80000000
+#define CC_ZERO		0x40000000
+#define CC_CARRY	0x20000000
+#define CC_OVERFLOW	0x10000000
+#define CC_EQ		0x00000000
+#define CC_NE		0x10000000
+#define CC_CS		0x20000000
+#define CC_HS		CC_CS
+#define CC_CC		0x30000000
+#define CC_LO		CC_CC
+#define CC_MI		0x40000000
+#define CC_PL		0x50000000
+#define CC_VS		0x60000000
+#define CC_VC		0x70000000
+#define CC_HI		0x80000000
+#define CC_LS		0x90000000
+#define CC_GE		0xa0000000
+#define CC_LT		0xb0000000
+#define CC_GT		0xc0000000
+#define CC_LE		0xd0000000
+#define CC_AL		0xe0000000
+#define CC_NV		0xf0000000
+
+/* rounding masks/values */
+#define MASK_ROUNDING_MODE	0x00000060
+#define ROUND_TO_NEAREST	0x00000000
+#define ROUND_TO_PLUS_INFINITY	0x00000020
+#define ROUND_TO_MINUS_INFINITY	0x00000040
+#define ROUND_TO_ZERO		0x00000060
+
+#define MASK_ROUNDING_PRECISION	0x00080080
+#define ROUND_SINGLE		0x00000000
+#define ROUND_DOUBLE		0x00000080
+#define ROUND_EXTENDED		0x00080000
+
+/* Get the condition code from the opcode. */
+#define getCondition(opcode)		(opcode >> 28)
+
+/* Get the source register from the opcode. */
+#define getRn(opcode)			((opcode & MASK_Rn) >> 16)
+
+/* Get the destination floating point register from the opcode. */
+#define getFd(opcode)			((opcode & MASK_Fd) >> 12)
+
+/* Get the first source floating point register from the opcode. */
+#define getFn(opcode)		((opcode & MASK_Fn) >> 16)
+
+/* Get the second source floating point register from the opcode. */
+#define getFm(opcode)		(opcode & MASK_Fm)
+
+/* Get the destination register from the opcode. */
+#define getRd(opcode)		((opcode & MASK_Rd) >> 12)
+
+/* Get the rounding mode from the opcode. */
+#define getRoundingMode(opcode)		((opcode & MASK_ROUNDING_MODE) >> 5)
+
+#ifdef CONFIG_FPE_NWFPE_XP
+static inline floatx80 __pure getExtendedConstant(const unsigned int nIndex)
+{
+	extern const floatx80 floatx80Constant[];
+	return floatx80Constant[nIndex];
+}
+#endif
+
+static inline float64 __pure getDoubleConstant(const unsigned int nIndex)
+{
+	extern const float64 float64Constant[];
+	return float64Constant[nIndex];
+}
+
+static inline float32 __pure getSingleConstant(const unsigned int nIndex)
+{
+	extern const float32 float32Constant[];
+	return float32Constant[nIndex];
+}
+
+static inline unsigned int getTransferLength(const unsigned int opcode)
+{
+	unsigned int nRc;
+
+	switch (opcode & MASK_TRANSFER_LENGTH) {
+	case 0x00000000:
+		nRc = 1;
+		break;		/* single precision */
+	case 0x00008000:
+		nRc = 2;
+		break;		/* double precision */
+	case 0x00400000:
+		nRc = 3;
+		break;		/* extended precision */
+	default:
+		nRc = 0;
+	}
+
+	return (nRc);
+}
+
+static inline unsigned int getRegisterCount(const unsigned int opcode)
+{
+	unsigned int nRc;
+
+	switch (opcode & MASK_REGISTER_COUNT) {
+	case 0x00000000:
+		nRc = 4;
+		break;
+	case 0x00008000:
+		nRc = 1;
+		break;
+	case 0x00400000:
+		nRc = 2;
+		break;
+	case 0x00408000:
+		nRc = 3;
+		break;
+	default:
+		nRc = 0;
+	}
+
+	return (nRc);
+}
+
+static inline unsigned int getRoundingPrecision(const unsigned int opcode)
+{
+	unsigned int nRc;
+
+	switch (opcode & MASK_ROUNDING_PRECISION) {
+	case 0x00000000:
+		nRc = 1;
+		break;
+	case 0x00000080:
+		nRc = 2;
+		break;
+	case 0x00080000:
+		nRc = 3;
+		break;
+	default:
+		nRc = 0;
+	}
+
+	return (nRc);
+}
+
+static inline unsigned int getDestinationSize(const unsigned int opcode)
+{
+	unsigned int nRc;
+
+	switch (opcode & MASK_DESTINATION_SIZE) {
+	case 0x00000000:
+		nRc = typeSingle;
+		break;
+	case 0x00000080:
+		nRc = typeDouble;
+		break;
+	case 0x00080000:
+		nRc = typeExtended;
+		break;
+	default:
+		nRc = typeNone;
+	}
+
+	return (nRc);
+}
+
+extern const float64 float64Constant[];
+extern const float32 float32Constant[];
+
+#endif
diff --git a/arch/arm/nwfpe/fpsr.h b/arch/arm/nwfpe/fpsr.h
new file mode 100644
index 000000000..bd425dc13
--- /dev/null
+++ b/arch/arm/nwfpe/fpsr.h
@@ -0,0 +1,108 @@
+/*
+    NetWinder Floating Point Emulator
+    (c) Rebel.com, 1998-1999
+
+    Direct questions, comments to Scott Bambrough <scottb@netwinder.org>
+
+    This program is free software; you can redistribute it and/or modify
+    it under the terms of the GNU General Public License as published by
+    the Free Software Foundation; either version 2 of the License, or
+    (at your option) any later version.
+
+    This program is distributed in the hope that it will be useful,
+    but WITHOUT ANY WARRANTY; without even the implied warranty of
+    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+    GNU General Public License for more details.
+
+    You should have received a copy of the GNU General Public License
+    along with this program; if not, write to the Free Software
+    Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+*/
+
+#ifndef __FPSR_H__
+#define __FPSR_H__
+
+/*
+The FPSR is a 32 bit register consisting of 4 parts, each exactly
+one byte.
+
+	SYSTEM ID
+	EXCEPTION TRAP ENABLE BYTE
+	SYSTEM CONTROL BYTE
+	CUMULATIVE EXCEPTION FLAGS BYTE
+
+The FPCR is a 32 bit register consisting of bit flags.
+*/
+
+/* SYSTEM ID
+------------
+Note: the system id byte is read only  */
+
+typedef unsigned int FPSR;	/* type for floating point status register */
+typedef unsigned int FPCR;	/* type for floating point control register */
+
+#define MASK_SYSID		0xff000000
+#define BIT_HARDWARE		0x80000000
+#define FP_EMULATOR		0x01000000	/* System ID for emulator */
+#define FP_ACCELERATOR		0x81000000	/* System ID for FPA11 */
+
+/* EXCEPTION TRAP ENABLE BYTE
+----------------------------- */
+
+#define MASK_TRAP_ENABLE	0x00ff0000
+#define MASK_TRAP_ENABLE_STRICT	0x001f0000
+#define BIT_IXE		0x00100000	/* inexact exception enable */
+#define BIT_UFE		0x00080000	/* underflow exception enable */
+#define BIT_OFE		0x00040000	/* overflow exception enable */
+#define BIT_DZE		0x00020000	/* divide by zero exception enable */
+#define BIT_IOE		0x00010000	/* invalid operation exception enable */
+
+/* SYSTEM CONTROL BYTE
+---------------------- */
+
+#define MASK_SYSTEM_CONTROL	0x0000ff00
+#define MASK_TRAP_STRICT	0x00001f00
+
+#define BIT_AC	0x00001000	/* use alternative C-flag definition
+				   for compares */
+#define BIT_EP	0x00000800	/* use expanded packed decimal format */
+#define BIT_SO	0x00000400	/* select synchronous operation of FPA */
+#define BIT_NE	0x00000200	/* NaN exception bit */
+#define BIT_ND	0x00000100	/* no denormalized numbers bit */
+
+/* CUMULATIVE EXCEPTION FLAGS BYTE
+---------------------------------- */
+
+#define MASK_EXCEPTION_FLAGS		0x000000ff
+#define MASK_EXCEPTION_FLAGS_STRICT	0x0000001f
+
+#define BIT_IXC		0x00000010	/* inexact exception flag */
+#define BIT_UFC		0x00000008	/* underflow exception flag */
+#define BIT_OFC		0x00000004	/* overfloat exception flag */
+#define BIT_DZC		0x00000002	/* divide by zero exception flag */
+#define BIT_IOC		0x00000001	/* invalid operation exception flag */
+
+/* Floating Point Control Register
+----------------------------------*/
+
+#define BIT_RU		0x80000000	/* rounded up bit */
+#define BIT_IE		0x10000000	/* inexact bit */
+#define BIT_MO		0x08000000	/* mantissa overflow bit */
+#define BIT_EO		0x04000000	/* exponent overflow bit */
+#define BIT_SB		0x00000800	/* store bounce */
+#define BIT_AB		0x00000400	/* arithmetic bounce */
+#define BIT_RE		0x00000200	/* rounding exception */
+#define BIT_DA		0x00000100	/* disable FPA */
+
+#define MASK_OP		0x00f08010	/* AU operation code */
+#define MASK_PR		0x00080080	/* AU precision */
+#define MASK_S1		0x00070000	/* AU source register 1 */
+#define MASK_S2		0x00000007	/* AU source register 2 */
+#define MASK_DS		0x00007000	/* AU destination register */
+#define MASK_RM		0x00000060	/* AU rounding mode */
+#define MASK_ALU	0x9cfff2ff	/* only ALU can write these bits */
+#define MASK_RESET	0x00000d00	/* bits set on reset, all others cleared */
+#define MASK_WFC	MASK_RESET
+#define MASK_RFC	~MASK_RESET
+
+#endif
diff --git a/arch/arm/nwfpe/milieu.h b/arch/arm/nwfpe/milieu.h
new file mode 100644
index 000000000..09a4f2dde
--- /dev/null
+++ b/arch/arm/nwfpe/milieu.h
@@ -0,0 +1,48 @@
+
+/*
+===============================================================================
+
+This C header file is part of the SoftFloat IEC/IEEE Floating-point
+Arithmetic Package, Release 2.
+
+Written by John R. Hauser.  This work was made possible in part by the
+International Computer Science Institute, located at Suite 600, 1947 Center
+Street, Berkeley, California 94704.  Funding was partially provided by the
+National Science Foundation under grant MIP-9311980.  The original version
+of this code was written as part of a project to build a fixed-point vector
+processor in collaboration with the University of California at Berkeley,
+overseen by Profs. Nelson Morgan and John Wawrzynek.  More information
+is available through the Web page
+http://www.jhauser.us/arithmetic/SoftFloat-2b/SoftFloat-source.txt
+
+THIS SOFTWARE IS DISTRIBUTED AS IS, FOR FREE.  Although reasonable effort
+has been made to avoid it, THIS SOFTWARE MAY CONTAIN FAULTS THAT WILL AT
+TIMES RESULT IN INCORRECT BEHAVIOR.  USE OF THIS SOFTWARE IS RESTRICTED TO
+PERSONS AND ORGANIZATIONS WHO CAN AND WILL TAKE FULL RESPONSIBILITY FOR ANY
+AND ALL LOSSES, COSTS, OR OTHER PROBLEMS ARISING FROM ITS USE.
+
+Derivative works are acceptable, even for commercial purposes, so long as
+(1) they include prominent notice that the work is derivative, and (2) they
+include prominent notice akin to these three paragraphs for those parts of
+this code that are retained.
+
+===============================================================================
+*/
+
+/*
+-------------------------------------------------------------------------------
+Include common integer types and flags.
+-------------------------------------------------------------------------------
+*/
+#include "ARM-gcc.h"
+
+/*
+-------------------------------------------------------------------------------
+Symbolic Boolean literals.
+-------------------------------------------------------------------------------
+*/
+enum {
+    FALSE = 0,
+    TRUE  = 1
+};
+
diff --git a/arch/arm/nwfpe/single_cpdo.c b/arch/arm/nwfpe/single_cpdo.c
new file mode 100644
index 000000000..c66981d68
--- /dev/null
+++ b/arch/arm/nwfpe/single_cpdo.c
@@ -0,0 +1,124 @@
+/*
+    NetWinder Floating Point Emulator
+    (c) Rebel.COM, 1998,1999
+    (c) Philip Blundell, 2001
+
+    Direct questions, comments to Scott Bambrough <scottb@netwinder.org>
+
+    This program is free software; you can redistribute it and/or modify
+    it under the terms of the GNU General Public License as published by
+    the Free Software Foundation; either version 2 of the License, or
+    (at your option) any later version.
+
+    This program is distributed in the hope that it will be useful,
+    but WITHOUT ANY WARRANTY; without even the implied warranty of
+    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+    GNU General Public License for more details.
+
+    You should have received a copy of the GNU General Public License
+    along with this program; if not, write to the Free Software
+    Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+*/
+
+#include "fpa11.h"
+#include "softfloat.h"
+#include "fpopcode.h"
+
+float32 float32_exp(float32 Fm);
+float32 float32_ln(float32 Fm);
+float32 float32_sin(float32 rFm);
+float32 float32_cos(float32 rFm);
+float32 float32_arcsin(float32 rFm);
+float32 float32_arctan(float32 rFm);
+float32 float32_log(float32 rFm);
+float32 float32_tan(float32 rFm);
+float32 float32_arccos(float32 rFm);
+float32 float32_pow(float32 rFn, float32 rFm);
+float32 float32_pol(float32 rFn, float32 rFm);
+
+static float32 float32_rsf(struct roundingData *roundData, float32 rFn, float32 rFm)
+{
+	return float32_sub(roundData, rFm, rFn);
+}
+
+static float32 float32_rdv(struct roundingData *roundData, float32 rFn, float32 rFm)
+{
+	return float32_div(roundData, rFm, rFn);
+}
+
+static float32 (*const dyadic_single[16])(struct roundingData *, float32 rFn, float32 rFm) = {
+	[ADF_CODE >> 20] = float32_add,
+	[MUF_CODE >> 20] = float32_mul,
+	[SUF_CODE >> 20] = float32_sub,
+	[RSF_CODE >> 20] = float32_rsf,
+	[DVF_CODE >> 20] = float32_div,
+	[RDF_CODE >> 20] = float32_rdv,
+	[RMF_CODE >> 20] = float32_rem,
+
+	[FML_CODE >> 20] = float32_mul,
+	[FDV_CODE >> 20] = float32_div,
+	[FRD_CODE >> 20] = float32_rdv,
+};
+
+static float32 float32_mvf(struct roundingData *roundData, float32 rFm)
+{
+	return rFm;
+}
+
+static float32 float32_mnf(struct roundingData *roundData, float32 rFm)
+{
+	return rFm ^ 0x80000000;
+}
+
+static float32 float32_abs(struct roundingData *roundData, float32 rFm)
+{
+	return rFm & 0x7fffffff;
+}
+
+static float32 (*const monadic_single[16])(struct roundingData*, float32 rFm) = {
+	[MVF_CODE >> 20] = float32_mvf,
+	[MNF_CODE >> 20] = float32_mnf,
+	[ABS_CODE >> 20] = float32_abs,
+	[RND_CODE >> 20] = float32_round_to_int,
+	[URD_CODE >> 20] = float32_round_to_int,
+	[SQT_CODE >> 20] = float32_sqrt,
+	[NRM_CODE >> 20] = float32_mvf,
+};
+
+unsigned int SingleCPDO(struct roundingData *roundData, const unsigned int opcode, FPREG * rFd)
+{
+	FPA11 *fpa11 = GET_FPA11();
+	float32 rFm;
+	unsigned int Fm, opc_mask_shift;
+
+	Fm = getFm(opcode);
+	if (CONSTANT_FM(opcode)) {
+		rFm = getSingleConstant(Fm);
+	} else if (fpa11->fType[Fm] == typeSingle) {
+		rFm = fpa11->fpreg[Fm].fSingle;
+	} else {
+		return 0;
+	}
+
+	opc_mask_shift = (opcode & MASK_ARITHMETIC_OPCODE) >> 20;
+	if (!MONADIC_INSTRUCTION(opcode)) {
+		unsigned int Fn = getFn(opcode);
+		float32 rFn;
+
+		if (fpa11->fType[Fn] == typeSingle &&
+		    dyadic_single[opc_mask_shift]) {
+			rFn = fpa11->fpreg[Fn].fSingle;
+			rFd->fSingle = dyadic_single[opc_mask_shift](roundData, rFn, rFm);
+		} else {
+			return 0;
+		}
+	} else {
+		if (monadic_single[opc_mask_shift]) {
+			rFd->fSingle = monadic_single[opc_mask_shift](roundData, rFm);
+		} else {
+			return 0;
+		}
+	}
+
+	return 1;
+}
diff --git a/arch/arm/nwfpe/softfloat-macros b/arch/arm/nwfpe/softfloat-macros
new file mode 100644
index 000000000..cf2a61731
--- /dev/null
+++ b/arch/arm/nwfpe/softfloat-macros
@@ -0,0 +1,754 @@
+
+/*
+===============================================================================
+
+This C source fragment is part of the SoftFloat IEC/IEEE Floating-point
+Arithmetic Package, Release 2.
+
+Written by John R. Hauser.  This work was made possible in part by the
+International Computer Science Institute, located at Suite 600, 1947 Center
+Street, Berkeley, California 94704.  Funding was partially provided by the
+National Science Foundation under grant MIP-9311980.  The original version
+of this code was written as part of a project to build a fixed-point vector
+processor in collaboration with the University of California at Berkeley,
+overseen by Profs. Nelson Morgan and John Wawrzynek.  More information
+is available through the web page
+http://www.jhauser.us/arithmetic/SoftFloat-2b/SoftFloat-source.txt
+
+THIS SOFTWARE IS DISTRIBUTED AS IS, FOR FREE.  Although reasonable effort
+has been made to avoid it, THIS SOFTWARE MAY CONTAIN FAULTS THAT WILL AT
+TIMES RESULT IN INCORRECT BEHAVIOR.  USE OF THIS SOFTWARE IS RESTRICTED TO
+PERSONS AND ORGANIZATIONS WHO CAN AND WILL TAKE FULL RESPONSIBILITY FOR ANY
+AND ALL LOSSES, COSTS, OR OTHER PROBLEMS ARISING FROM ITS USE.
+
+Derivative works are acceptable, even for commercial purposes, so long as
+(1) they include prominent notice that the work is derivative, and (2) they
+include prominent notice akin to these three paragraphs for those parts of
+this code that are retained.
+
+===============================================================================
+*/
+
+/*
+-------------------------------------------------------------------------------
+Shifts `a' right by the number of bits given in `count'.  If any nonzero
+bits are shifted off, they are ``jammed'' into the least significant bit of
+the result by setting the least significant bit to 1.  The value of `count'
+can be arbitrarily large; in particular, if `count' is greater than 32, the
+result will be either 0 or 1, depending on whether `a' is zero or nonzero.
+The result is stored in the location pointed to by `zPtr'.
+-------------------------------------------------------------------------------
+*/
+INLINE void shift32RightJamming( bits32 a, int16 count, bits32 *zPtr )
+{
+    bits32 z;
+    if ( count == 0 ) {
+        z = a;
+    }
+    else if ( count < 32 ) {
+        z = ( a>>count ) | ( ( a<<( ( - count ) & 31 ) ) != 0 );
+    }
+    else {
+        z = ( a != 0 );
+    }
+    *zPtr = z;
+}
+
+/*
+-------------------------------------------------------------------------------
+Shifts `a' right by the number of bits given in `count'.  If any nonzero
+bits are shifted off, they are ``jammed'' into the least significant bit of
+the result by setting the least significant bit to 1.  The value of `count'
+can be arbitrarily large; in particular, if `count' is greater than 64, the
+result will be either 0 or 1, depending on whether `a' is zero or nonzero.
+The result is stored in the location pointed to by `zPtr'.
+-------------------------------------------------------------------------------
+*/
+INLINE void shift64RightJamming( bits64 a, int16 count, bits64 *zPtr )
+{
+    bits64 z;
+
+ __asm__("@shift64RightJamming -- start");   
+    if ( count == 0 ) {
+        z = a;
+    }
+    else if ( count < 64 ) {
+        z = ( a>>count ) | ( ( a<<( ( - count ) & 63 ) ) != 0 );
+    }
+    else {
+        z = ( a != 0 );
+    }
+ __asm__("@shift64RightJamming -- end");   
+    *zPtr = z;
+}
+
+/*
+-------------------------------------------------------------------------------
+Shifts the 128-bit value formed by concatenating `a0' and `a1' right by 64
+_plus_ the number of bits given in `count'.  The shifted result is at most
+64 nonzero bits; this is stored at the location pointed to by `z0Ptr'.  The
+bits shifted off form a second 64-bit result as follows:  The _last_ bit
+shifted off is the most-significant bit of the extra result, and the other
+63 bits of the extra result are all zero if and only if _all_but_the_last_
+bits shifted off were all zero.  This extra result is stored in the location
+pointed to by `z1Ptr'.  The value of `count' can be arbitrarily large.
+    (This routine makes more sense if `a0' and `a1' are considered to form a
+fixed-point value with binary point between `a0' and `a1'.  This fixed-point
+value is shifted right by the number of bits given in `count', and the
+integer part of the result is returned at the location pointed to by
+`z0Ptr'.  The fractional part of the result may be slightly corrupted as
+described above, and is returned at the location pointed to by `z1Ptr'.)
+-------------------------------------------------------------------------------
+*/
+INLINE void
+ shift64ExtraRightJamming(
+     bits64 a0, bits64 a1, int16 count, bits64 *z0Ptr, bits64 *z1Ptr )
+{
+    bits64 z0, z1;
+    int8 negCount = ( - count ) & 63;
+
+    if ( count == 0 ) {
+        z1 = a1;
+        z0 = a0;
+    }
+    else if ( count < 64 ) {
+        z1 = ( a0<<negCount ) | ( a1 != 0 );
+        z0 = a0>>count;
+    }
+    else {
+        if ( count == 64 ) {
+            z1 = a0 | ( a1 != 0 );
+        }
+        else {
+            z1 = ( ( a0 | a1 ) != 0 );
+        }
+        z0 = 0;
+    }
+    *z1Ptr = z1;
+    *z0Ptr = z0;
+
+}
+
+/*
+-------------------------------------------------------------------------------
+Shifts the 128-bit value formed by concatenating `a0' and `a1' right by the
+number of bits given in `count'.  Any bits shifted off are lost.  The value
+of `count' can be arbitrarily large; in particular, if `count' is greater
+than 128, the result will be 0.  The result is broken into two 64-bit pieces
+which are stored at the locations pointed to by `z0Ptr' and `z1Ptr'.
+-------------------------------------------------------------------------------
+*/
+INLINE void
+ shift128Right(
+     bits64 a0, bits64 a1, int16 count, bits64 *z0Ptr, bits64 *z1Ptr )
+{
+    bits64 z0, z1;
+    int8 negCount = ( - count ) & 63;
+
+    if ( count == 0 ) {
+        z1 = a1;
+        z0 = a0;
+    }
+    else if ( count < 64 ) {
+        z1 = ( a0<<negCount ) | ( a1>>count );
+        z0 = a0>>count;
+    }
+    else {
+        z1 = ( count < 64 ) ? ( a0>>( count & 63 ) ) : 0;
+        z0 = 0;
+    }
+    *z1Ptr = z1;
+    *z0Ptr = z0;
+
+}
+
+/*
+-------------------------------------------------------------------------------
+Shifts the 128-bit value formed by concatenating `a0' and `a1' right by the
+number of bits given in `count'.  If any nonzero bits are shifted off, they
+are ``jammed'' into the least significant bit of the result by setting the
+least significant bit to 1.  The value of `count' can be arbitrarily large;
+in particular, if `count' is greater than 128, the result will be either 0
+or 1, depending on whether the concatenation of `a0' and `a1' is zero or
+nonzero.  The result is broken into two 64-bit pieces which are stored at
+the locations pointed to by `z0Ptr' and `z1Ptr'.
+-------------------------------------------------------------------------------
+*/
+INLINE void
+ shift128RightJamming(
+     bits64 a0, bits64 a1, int16 count, bits64 *z0Ptr, bits64 *z1Ptr )
+{
+    bits64 z0, z1;
+    int8 negCount = ( - count ) & 63;
+
+    if ( count == 0 ) {
+        z1 = a1;
+        z0 = a0;
+    }
+    else if ( count < 64 ) {
+        z1 = ( a0<<negCount ) | ( a1>>count ) | ( ( a1<<negCount ) != 0 );
+        z0 = a0>>count;
+    }
+    else {
+        if ( count == 64 ) {
+            z1 = a0 | ( a1 != 0 );
+        }
+        else if ( count < 128 ) {
+            z1 = ( a0>>( count & 63 ) ) | ( ( ( a0<<negCount ) | a1 ) != 0 );
+        }
+        else {
+            z1 = ( ( a0 | a1 ) != 0 );
+        }
+        z0 = 0;
+    }
+    *z1Ptr = z1;
+    *z0Ptr = z0;
+
+}
+
+/*
+-------------------------------------------------------------------------------
+Shifts the 192-bit value formed by concatenating `a0', `a1', and `a2' right
+by 64 _plus_ the number of bits given in `count'.  The shifted result is
+at most 128 nonzero bits; these are broken into two 64-bit pieces which are
+stored at the locations pointed to by `z0Ptr' and `z1Ptr'.  The bits shifted
+off form a third 64-bit result as follows:  The _last_ bit shifted off is
+the most-significant bit of the extra result, and the other 63 bits of the
+extra result are all zero if and only if _all_but_the_last_ bits shifted off
+were all zero.  This extra result is stored in the location pointed to by
+`z2Ptr'.  The value of `count' can be arbitrarily large.
+    (This routine makes more sense if `a0', `a1', and `a2' are considered
+to form a fixed-point value with binary point between `a1' and `a2'.  This
+fixed-point value is shifted right by the number of bits given in `count',
+and the integer part of the result is returned at the locations pointed to
+by `z0Ptr' and `z1Ptr'.  The fractional part of the result may be slightly
+corrupted as described above, and is returned at the location pointed to by
+`z2Ptr'.)
+-------------------------------------------------------------------------------
+*/
+INLINE void
+ shift128ExtraRightJamming(
+     bits64 a0,
+     bits64 a1,
+     bits64 a2,
+     int16 count,
+     bits64 *z0Ptr,
+     bits64 *z1Ptr,
+     bits64 *z2Ptr
+ )
+{
+    bits64 z0, z1, z2;
+    int8 negCount = ( - count ) & 63;
+
+    if ( count == 0 ) {
+        z2 = a2;
+        z1 = a1;
+        z0 = a0;
+    }
+    else {
+        if ( count < 64 ) {
+            z2 = a1<<negCount;
+            z1 = ( a0<<negCount ) | ( a1>>count );
+            z0 = a0>>count;
+        }
+        else {
+            if ( count == 64 ) {
+                z2 = a1;
+                z1 = a0;
+            }
+            else {
+                a2 |= a1;
+                if ( count < 128 ) {
+                    z2 = a0<<negCount;
+                    z1 = a0>>( count & 63 );
+                }
+                else {
+                    z2 = ( count == 128 ) ? a0 : ( a0 != 0 );
+                    z1 = 0;
+                }
+            }
+            z0 = 0;
+        }
+        z2 |= ( a2 != 0 );
+    }
+    *z2Ptr = z2;
+    *z1Ptr = z1;
+    *z0Ptr = z0;
+
+}
+
+/*
+-------------------------------------------------------------------------------
+Shifts the 128-bit value formed by concatenating `a0' and `a1' left by the
+number of bits given in `count'.  Any bits shifted off are lost.  The value
+of `count' must be less than 64.  The result is broken into two 64-bit
+pieces which are stored at the locations pointed to by `z0Ptr' and `z1Ptr'.
+-------------------------------------------------------------------------------
+*/
+INLINE void
+ shortShift128Left(
+     bits64 a0, bits64 a1, int16 count, bits64 *z0Ptr, bits64 *z1Ptr )
+{
+
+    *z1Ptr = a1<<count;
+    *z0Ptr =
+        ( count == 0 ) ? a0 : ( a0<<count ) | ( a1>>( ( - count ) & 63 ) );
+
+}
+
+/*
+-------------------------------------------------------------------------------
+Shifts the 192-bit value formed by concatenating `a0', `a1', and `a2' left
+by the number of bits given in `count'.  Any bits shifted off are lost.
+The value of `count' must be less than 64.  The result is broken into three
+64-bit pieces which are stored at the locations pointed to by `z0Ptr',
+`z1Ptr', and `z2Ptr'.
+-------------------------------------------------------------------------------
+*/
+INLINE void
+ shortShift192Left(
+     bits64 a0,
+     bits64 a1,
+     bits64 a2,
+     int16 count,
+     bits64 *z0Ptr,
+     bits64 *z1Ptr,
+     bits64 *z2Ptr
+ )
+{
+    bits64 z0, z1, z2;
+    int8 negCount;
+
+    z2 = a2<<count;
+    z1 = a1<<count;
+    z0 = a0<<count;
+    if ( 0 < count ) {
+        negCount = ( ( - count ) & 63 );
+        z1 |= a2>>negCount;
+        z0 |= a1>>negCount;
+    }
+    *z2Ptr = z2;
+    *z1Ptr = z1;
+    *z0Ptr = z0;
+
+}
+
+/*
+-------------------------------------------------------------------------------
+Adds the 128-bit value formed by concatenating `a0' and `a1' to the 128-bit
+value formed by concatenating `b0' and `b1'.  Addition is modulo 2^128, so
+any carry out is lost.  The result is broken into two 64-bit pieces which
+are stored at the locations pointed to by `z0Ptr' and `z1Ptr'.
+-------------------------------------------------------------------------------
+*/
+INLINE void
+ add128(
+     bits64 a0, bits64 a1, bits64 b0, bits64 b1, bits64 *z0Ptr, bits64 *z1Ptr )
+{
+    bits64 z1;
+
+    z1 = a1 + b1;
+    *z1Ptr = z1;
+    *z0Ptr = a0 + b0 + ( z1 < a1 );
+
+}
+
+/*
+-------------------------------------------------------------------------------
+Adds the 192-bit value formed by concatenating `a0', `a1', and `a2' to the
+192-bit value formed by concatenating `b0', `b1', and `b2'.  Addition is
+modulo 2^192, so any carry out is lost.  The result is broken into three
+64-bit pieces which are stored at the locations pointed to by `z0Ptr',
+`z1Ptr', and `z2Ptr'.
+-------------------------------------------------------------------------------
+*/
+INLINE void
+ add192(
+     bits64 a0,
+     bits64 a1,
+     bits64 a2,
+     bits64 b0,
+     bits64 b1,
+     bits64 b2,
+     bits64 *z0Ptr,
+     bits64 *z1Ptr,
+     bits64 *z2Ptr
+ )
+{
+    bits64 z0, z1, z2;
+    int8 carry0, carry1;
+
+    z2 = a2 + b2;
+    carry1 = ( z2 < a2 );
+    z1 = a1 + b1;
+    carry0 = ( z1 < a1 );
+    z0 = a0 + b0;
+    z1 += carry1;
+    z0 += ( z1 < carry1 );
+    z0 += carry0;
+    *z2Ptr = z2;
+    *z1Ptr = z1;
+    *z0Ptr = z0;
+
+}
+
+/*
+-------------------------------------------------------------------------------
+Subtracts the 128-bit value formed by concatenating `b0' and `b1' from the
+128-bit value formed by concatenating `a0' and `a1'.  Subtraction is modulo
+2^128, so any borrow out (carry out) is lost.  The result is broken into two
+64-bit pieces which are stored at the locations pointed to by `z0Ptr' and
+`z1Ptr'.
+-------------------------------------------------------------------------------
+*/
+INLINE void
+ sub128(
+     bits64 a0, bits64 a1, bits64 b0, bits64 b1, bits64 *z0Ptr, bits64 *z1Ptr )
+{
+
+    *z1Ptr = a1 - b1;
+    *z0Ptr = a0 - b0 - ( a1 < b1 );
+
+}
+
+/*
+-------------------------------------------------------------------------------
+Subtracts the 192-bit value formed by concatenating `b0', `b1', and `b2'
+from the 192-bit value formed by concatenating `a0', `a1', and `a2'.
+Subtraction is modulo 2^192, so any borrow out (carry out) is lost.  The
+result is broken into three 64-bit pieces which are stored at the locations
+pointed to by `z0Ptr', `z1Ptr', and `z2Ptr'.
+-------------------------------------------------------------------------------
+*/
+INLINE void
+ sub192(
+     bits64 a0,
+     bits64 a1,
+     bits64 a2,
+     bits64 b0,
+     bits64 b1,
+     bits64 b2,
+     bits64 *z0Ptr,
+     bits64 *z1Ptr,
+     bits64 *z2Ptr
+ )
+{
+    bits64 z0, z1, z2;
+    int8 borrow0, borrow1;
+
+    z2 = a2 - b2;
+    borrow1 = ( a2 < b2 );
+    z1 = a1 - b1;
+    borrow0 = ( a1 < b1 );
+    z0 = a0 - b0;
+    z0 -= ( z1 < borrow1 );
+    z1 -= borrow1;
+    z0 -= borrow0;
+    *z2Ptr = z2;
+    *z1Ptr = z1;
+    *z0Ptr = z0;
+
+}
+
+/*
+-------------------------------------------------------------------------------
+Multiplies `a' by `b' to obtain a 128-bit product.  The product is broken
+into two 64-bit pieces which are stored at the locations pointed to by
+`z0Ptr' and `z1Ptr'.
+-------------------------------------------------------------------------------
+*/
+INLINE void mul64To128( bits64 a, bits64 b, bits64 *z0Ptr, bits64 *z1Ptr )
+{
+    bits32 aHigh, aLow, bHigh, bLow;
+    bits64 z0, zMiddleA, zMiddleB, z1;
+
+    aLow = a;
+    aHigh = a>>32;
+    bLow = b;
+    bHigh = b>>32;
+    z1 = ( (bits64) aLow ) * bLow;
+    zMiddleA = ( (bits64) aLow ) * bHigh;
+    zMiddleB = ( (bits64) aHigh ) * bLow;
+    z0 = ( (bits64) aHigh ) * bHigh;
+    zMiddleA += zMiddleB;
+    z0 += ( ( (bits64) ( zMiddleA < zMiddleB ) )<<32 ) + ( zMiddleA>>32 );
+    zMiddleA <<= 32;
+    z1 += zMiddleA;
+    z0 += ( z1 < zMiddleA );
+    *z1Ptr = z1;
+    *z0Ptr = z0;
+
+}
+
+/*
+-------------------------------------------------------------------------------
+Multiplies the 128-bit value formed by concatenating `a0' and `a1' by `b' to
+obtain a 192-bit product.  The product is broken into three 64-bit pieces
+which are stored at the locations pointed to by `z0Ptr', `z1Ptr', and
+`z2Ptr'.
+-------------------------------------------------------------------------------
+*/
+INLINE void
+ mul128By64To192(
+     bits64 a0,
+     bits64 a1,
+     bits64 b,
+     bits64 *z0Ptr,
+     bits64 *z1Ptr,
+     bits64 *z2Ptr
+ )
+{
+    bits64 z0, z1, z2, more1;
+
+    mul64To128( a1, b, &z1, &z2 );
+    mul64To128( a0, b, &z0, &more1 );
+    add128( z0, more1, 0, z1, &z0, &z1 );
+    *z2Ptr = z2;
+    *z1Ptr = z1;
+    *z0Ptr = z0;
+
+}
+
+/*
+-------------------------------------------------------------------------------
+Multiplies the 128-bit value formed by concatenating `a0' and `a1' to the
+128-bit value formed by concatenating `b0' and `b1' to obtain a 256-bit
+product.  The product is broken into four 64-bit pieces which are stored at
+the locations pointed to by `z0Ptr', `z1Ptr', `z2Ptr', and `z3Ptr'.
+-------------------------------------------------------------------------------
+*/
+INLINE void
+ mul128To256(
+     bits64 a0,
+     bits64 a1,
+     bits64 b0,
+     bits64 b1,
+     bits64 *z0Ptr,
+     bits64 *z1Ptr,
+     bits64 *z2Ptr,
+     bits64 *z3Ptr
+ )
+{
+    bits64 z0, z1, z2, z3;
+    bits64 more1, more2;
+
+    mul64To128( a1, b1, &z2, &z3 );
+    mul64To128( a1, b0, &z1, &more2 );
+    add128( z1, more2, 0, z2, &z1, &z2 );
+    mul64To128( a0, b0, &z0, &more1 );
+    add128( z0, more1, 0, z1, &z0, &z1 );
+    mul64To128( a0, b1, &more1, &more2 );
+    add128( more1, more2, 0, z2, &more1, &z2 );
+    add128( z0, z1, 0, more1, &z0, &z1 );
+    *z3Ptr = z3;
+    *z2Ptr = z2;
+    *z1Ptr = z1;
+    *z0Ptr = z0;
+
+}
+
+/*
+-------------------------------------------------------------------------------
+Returns an approximation to the 64-bit integer quotient obtained by dividing
+`b' into the 128-bit value formed by concatenating `a0' and `a1'.  The
+divisor `b' must be at least 2^63.  If q is the exact quotient truncated
+toward zero, the approximation returned lies between q and q + 2 inclusive.
+If the exact quotient q is larger than 64 bits, the maximum positive 64-bit
+unsigned integer is returned.
+-------------------------------------------------------------------------------
+*/
+static bits64 estimateDiv128To64( bits64 a0, bits64 a1, bits64 b )
+{
+    bits64 b0, b1;
+    bits64 rem0, rem1, term0, term1;
+    bits64 z;
+    if ( b <= a0 ) return LIT64( 0xFFFFFFFFFFFFFFFF );
+    b0 = b>>32;  /* hence b0 is 32 bits wide now */
+    if ( b0<<32 <= a0 ) {
+        z = LIT64( 0xFFFFFFFF00000000 );
+    }  else {
+        z = a0;
+        do_div( z, b0 );
+        z <<= 32;
+    }
+    mul64To128( b, z, &term0, &term1 );
+    sub128( a0, a1, term0, term1, &rem0, &rem1 );
+    while ( ( (sbits64) rem0 ) < 0 ) {
+        z -= LIT64( 0x100000000 );
+        b1 = b<<32;
+        add128( rem0, rem1, b0, b1, &rem0, &rem1 );
+    }
+    rem0 = ( rem0<<32 ) | ( rem1>>32 );
+    if ( b0<<32 <= rem0 ) {
+        z |= 0xFFFFFFFF;
+    } else {
+        do_div( rem0, b0 );
+        z |= rem0;
+    }
+    return z;
+
+}
+
+/*
+-------------------------------------------------------------------------------
+Returns an approximation to the square root of the 32-bit significand given
+by `a'.  Considered as an integer, `a' must be at least 2^31.  If bit 0 of
+`aExp' (the least significant bit) is 1, the integer returned approximates
+2^31*sqrt(`a'/2^31), where `a' is considered an integer.  If bit 0 of `aExp'
+is 0, the integer returned approximates 2^31*sqrt(`a'/2^30).  In either
+case, the approximation returned lies strictly within +/-2 of the exact
+value.
+-------------------------------------------------------------------------------
+*/
+static bits32 estimateSqrt32( int16 aExp, bits32 a )
+{
+    static const bits16 sqrtOddAdjustments[] = {
+        0x0004, 0x0022, 0x005D, 0x00B1, 0x011D, 0x019F, 0x0236, 0x02E0,
+        0x039C, 0x0468, 0x0545, 0x0631, 0x072B, 0x0832, 0x0946, 0x0A67
+    };
+    static const bits16 sqrtEvenAdjustments[] = {
+        0x0A2D, 0x08AF, 0x075A, 0x0629, 0x051A, 0x0429, 0x0356, 0x029E,
+        0x0200, 0x0179, 0x0109, 0x00AF, 0x0068, 0x0034, 0x0012, 0x0002
+    };
+    int8 index;
+    bits32 z;
+    bits64 A;
+
+    index = ( a>>27 ) & 15;
+    if ( aExp & 1 ) {
+        z = 0x4000 + ( a>>17 ) - sqrtOddAdjustments[ index ];
+        z = ( ( a / z )<<14 ) + ( z<<15 );
+        a >>= 1;
+    }
+    else {
+        z = 0x8000 + ( a>>17 ) - sqrtEvenAdjustments[ index ];
+        z = a / z + z;
+        z = ( 0x20000 <= z ) ? 0xFFFF8000 : ( z<<15 );
+        if ( z <= a ) return (bits32) ( ( (sbits32) a )>>1 );
+    }
+    A = ( (bits64) a )<<31;
+    do_div( A, z );
+    return ( (bits32) A ) + ( z>>1 );
+
+}
+
+/*
+-------------------------------------------------------------------------------
+Returns the number of leading 0 bits before the most-significant 1 bit
+of `a'.  If `a' is zero, 32 is returned.
+-------------------------------------------------------------------------------
+*/
+static int8 countLeadingZeros32( bits32 a )
+{
+    static const int8 countLeadingZerosHigh[] = {
+        8, 7, 6, 6, 5, 5, 5, 5, 4, 4, 4, 4, 4, 4, 4, 4,
+        3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3,
+        2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
+        2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
+        1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
+        1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
+        1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
+        1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
+        0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+        0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+        0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+        0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+        0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+        0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+        0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+        0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
+    };
+    int8 shiftCount;
+
+    shiftCount = 0;
+    if ( a < 0x10000 ) {
+        shiftCount += 16;
+        a <<= 16;
+    }
+    if ( a < 0x1000000 ) {
+        shiftCount += 8;
+        a <<= 8;
+    }
+    shiftCount += countLeadingZerosHigh[ a>>24 ];
+    return shiftCount;
+
+}
+
+/*
+-------------------------------------------------------------------------------
+Returns the number of leading 0 bits before the most-significant 1 bit
+of `a'.  If `a' is zero, 64 is returned.
+-------------------------------------------------------------------------------
+*/
+static int8 countLeadingZeros64( bits64 a )
+{
+    int8 shiftCount;
+
+    shiftCount = 0;
+    if ( a < ( (bits64) 1 )<<32 ) {
+        shiftCount += 32;
+    }
+    else {
+        a >>= 32;
+    }
+    shiftCount += countLeadingZeros32( a );
+    return shiftCount;
+
+}
+
+/*
+-------------------------------------------------------------------------------
+Returns 1 if the 128-bit value formed by concatenating `a0' and `a1'
+is equal to the 128-bit value formed by concatenating `b0' and `b1'.
+Otherwise, returns 0.
+-------------------------------------------------------------------------------
+*/
+INLINE flag eq128( bits64 a0, bits64 a1, bits64 b0, bits64 b1 )
+{
+
+    return ( a0 == b0 ) && ( a1 == b1 );
+
+}
+
+/*
+-------------------------------------------------------------------------------
+Returns 1 if the 128-bit value formed by concatenating `a0' and `a1' is less
+than or equal to the 128-bit value formed by concatenating `b0' and `b1'.
+Otherwise, returns 0.
+-------------------------------------------------------------------------------
+*/
+INLINE flag le128( bits64 a0, bits64 a1, bits64 b0, bits64 b1 )
+{
+
+    return ( a0 < b0 ) || ( ( a0 == b0 ) && ( a1 <= b1 ) );
+
+}
+
+/*
+-------------------------------------------------------------------------------
+Returns 1 if the 128-bit value formed by concatenating `a0' and `a1' is less
+than the 128-bit value formed by concatenating `b0' and `b1'.  Otherwise,
+returns 0.
+-------------------------------------------------------------------------------
+*/
+INLINE flag lt128( bits64 a0, bits64 a1, bits64 b0, bits64 b1 )
+{
+
+    return ( a0 < b0 ) || ( ( a0 == b0 ) && ( a1 < b1 ) );
+
+}
+
+/*
+-------------------------------------------------------------------------------
+Returns 1 if the 128-bit value formed by concatenating `a0' and `a1' is
+not equal to the 128-bit value formed by concatenating `b0' and `b1'.
+Otherwise, returns 0.
+-------------------------------------------------------------------------------
+*/
+INLINE flag ne128( bits64 a0, bits64 a1, bits64 b0, bits64 b1 )
+{
+
+    return ( a0 != b0 ) || ( a1 != b1 );
+
+}
+
diff --git a/arch/arm/nwfpe/softfloat-specialize b/arch/arm/nwfpe/softfloat-specialize
new file mode 100644
index 000000000..679a0269d
--- /dev/null
+++ b/arch/arm/nwfpe/softfloat-specialize
@@ -0,0 +1,367 @@
+
+/*
+===============================================================================
+
+This C source fragment is part of the SoftFloat IEC/IEEE Floating-point
+Arithmetic Package, Release 2.
+
+Written by John R. Hauser.  This work was made possible in part by the
+International Computer Science Institute, located at Suite 600, 1947 Center
+Street, Berkeley, California 94704.  Funding was partially provided by the
+National Science Foundation under grant MIP-9311980.  The original version
+of this code was written as part of a project to build a fixed-point vector
+processor in collaboration with the University of California at Berkeley,
+overseen by Profs. Nelson Morgan and John Wawrzynek.  More information
+is available through the Web page
+http://www.jhauser.us/arithmetic/SoftFloat-2b/SoftFloat-source.txt
+
+THIS SOFTWARE IS DISTRIBUTED AS IS, FOR FREE.  Although reasonable effort
+has been made to avoid it, THIS SOFTWARE MAY CONTAIN FAULTS THAT WILL AT
+TIMES RESULT IN INCORRECT BEHAVIOR.  USE OF THIS SOFTWARE IS RESTRICTED TO
+PERSONS AND ORGANIZATIONS WHO CAN AND WILL TAKE FULL RESPONSIBILITY FOR ANY
+AND ALL LOSSES, COSTS, OR OTHER PROBLEMS ARISING FROM ITS USE.
+
+Derivative works are acceptable, even for commercial purposes, so long as
+(1) they include prominent notice that the work is derivative, and (2) they
+include prominent notice akin to these three paragraphs for those parts of
+this code that are retained.
+
+===============================================================================
+*/
+
+/*
+-------------------------------------------------------------------------------
+Underflow tininess-detection mode, statically initialized to default value.
+(The declaration in `softfloat.h' must match the `int8' type here.)
+-------------------------------------------------------------------------------
+*/
+int8 float_detect_tininess = float_tininess_after_rounding;
+
+/*
+-------------------------------------------------------------------------------
+Raises the exceptions specified by `flags'.  Floating-point traps can be
+defined here if desired.  It is currently not possible for such a trap to
+substitute a result value.  If traps are not implemented, this routine
+should be simply `float_exception_flags |= flags;'.
+
+ScottB:  November 4, 1998
+Moved this function out of softfloat-specialize into fpmodule.c.
+This effectively isolates all the changes required for integrating with the
+Linux kernel into fpmodule.c.  Porting to NetBSD should only require modifying
+fpmodule.c to integrate with the NetBSD kernel (I hope!).
+-------------------------------------------------------------------------------
+void float_raise( int8 flags )
+{
+    float_exception_flags |= flags;
+}
+*/
+
+/*
+-------------------------------------------------------------------------------
+Internal canonical NaN format.
+-------------------------------------------------------------------------------
+*/
+typedef struct {
+    flag sign;
+    bits64 high, low;
+} commonNaNT;
+
+/*
+-------------------------------------------------------------------------------
+The pattern for a default generated single-precision NaN.
+-------------------------------------------------------------------------------
+*/
+#define float32_default_nan 0xFFFFFFFF
+
+/*
+-------------------------------------------------------------------------------
+Returns 1 if the single-precision floating-point value `a' is a NaN;
+otherwise returns 0.
+-------------------------------------------------------------------------------
+*/
+flag float32_is_nan( float32 a )
+{
+
+    return ( 0xFF000000 < (bits32) ( a<<1 ) );
+
+}
+
+/*
+-------------------------------------------------------------------------------
+Returns 1 if the single-precision floating-point value `a' is a signaling
+NaN; otherwise returns 0.
+-------------------------------------------------------------------------------
+*/
+flag float32_is_signaling_nan( float32 a )
+{
+
+    return ( ( ( a>>22 ) & 0x1FF ) == 0x1FE ) && ( a & 0x003FFFFF );
+
+}
+
+/*
+-------------------------------------------------------------------------------
+Returns the result of converting the single-precision floating-point NaN
+`a' to the canonical NaN format.  If `a' is a signaling NaN, the invalid
+exception is raised.
+-------------------------------------------------------------------------------
+*/
+static commonNaNT float32ToCommonNaN( float32 a )
+{
+    commonNaNT z;
+
+    if ( float32_is_signaling_nan( a ) ) float_raise( float_flag_invalid );
+    z.sign = a>>31;
+    z.low = 0;
+    z.high = ( (bits64) a )<<41;
+    return z;
+
+}
+
+/*
+-------------------------------------------------------------------------------
+Returns the result of converting the canonical NaN `a' to the single-
+precision floating-point format.
+-------------------------------------------------------------------------------
+*/
+static float32 commonNaNToFloat32( commonNaNT a )
+{
+
+    return ( ( (bits32) a.sign )<<31 ) | 0x7FC00000 | ( a.high>>41 );
+
+}
+
+/*
+-------------------------------------------------------------------------------
+Takes two single-precision floating-point values `a' and `b', one of which
+is a NaN, and returns the appropriate NaN result.  If either `a' or `b' is a
+signaling NaN, the invalid exception is raised.
+-------------------------------------------------------------------------------
+*/
+static float32 propagateFloat32NaN( float32 a, float32 b )
+{
+    flag aIsNaN, aIsSignalingNaN, bIsNaN, bIsSignalingNaN;
+
+    aIsNaN = float32_is_nan( a );
+    aIsSignalingNaN = float32_is_signaling_nan( a );
+    bIsNaN = float32_is_nan( b );
+    bIsSignalingNaN = float32_is_signaling_nan( b );
+    a |= 0x00400000;
+    b |= 0x00400000;
+    if ( aIsSignalingNaN | bIsSignalingNaN ) float_raise( float_flag_invalid );
+    if ( aIsNaN ) {
+        return ( aIsSignalingNaN & bIsNaN ) ? b : a;
+    }
+    else {
+        return b;
+    }
+
+}
+
+/*
+-------------------------------------------------------------------------------
+The pattern for a default generated double-precision NaN.
+-------------------------------------------------------------------------------
+*/
+#define float64_default_nan LIT64( 0xFFFFFFFFFFFFFFFF )
+
+/*
+-------------------------------------------------------------------------------
+Returns 1 if the double-precision floating-point value `a' is a NaN;
+otherwise returns 0.
+-------------------------------------------------------------------------------
+*/
+flag float64_is_nan( float64 a )
+{
+
+    return ( LIT64( 0xFFE0000000000000 ) < (bits64) ( a<<1 ) );
+
+}
+
+/*
+-------------------------------------------------------------------------------
+Returns 1 if the double-precision floating-point value `a' is a signaling
+NaN; otherwise returns 0.
+-------------------------------------------------------------------------------
+*/
+flag float64_is_signaling_nan( float64 a )
+{
+
+    return
+           ( ( ( a>>51 ) & 0xFFF ) == 0xFFE )
+        && ( a & LIT64( 0x0007FFFFFFFFFFFF ) );
+
+}
+
+/*
+-------------------------------------------------------------------------------
+Returns the result of converting the double-precision floating-point NaN
+`a' to the canonical NaN format.  If `a' is a signaling NaN, the invalid
+exception is raised.
+-------------------------------------------------------------------------------
+*/
+static commonNaNT float64ToCommonNaN( float64 a )
+{
+    commonNaNT z;
+
+    if ( float64_is_signaling_nan( a ) ) float_raise( float_flag_invalid );
+    z.sign = a>>63;
+    z.low = 0;
+    z.high = a<<12;
+    return z;
+
+}
+
+/*
+-------------------------------------------------------------------------------
+Returns the result of converting the canonical NaN `a' to the double-
+precision floating-point format.
+-------------------------------------------------------------------------------
+*/
+static float64 commonNaNToFloat64( commonNaNT a )
+{
+
+    return
+          ( ( (bits64) a.sign )<<63 )
+        | LIT64( 0x7FF8000000000000 )
+        | ( a.high>>12 );
+
+}
+
+/*
+-------------------------------------------------------------------------------
+Takes two double-precision floating-point values `a' and `b', one of which
+is a NaN, and returns the appropriate NaN result.  If either `a' or `b' is a
+signaling NaN, the invalid exception is raised.
+-------------------------------------------------------------------------------
+*/
+static float64 propagateFloat64NaN( float64 a, float64 b )
+{
+    flag aIsNaN, aIsSignalingNaN, bIsNaN, bIsSignalingNaN;
+
+    aIsNaN = float64_is_nan( a );
+    aIsSignalingNaN = float64_is_signaling_nan( a );
+    bIsNaN = float64_is_nan( b );
+    bIsSignalingNaN = float64_is_signaling_nan( b );
+    a |= LIT64( 0x0008000000000000 );
+    b |= LIT64( 0x0008000000000000 );
+    if ( aIsSignalingNaN | bIsSignalingNaN ) float_raise( float_flag_invalid );
+    if ( aIsNaN ) {
+        return ( aIsSignalingNaN & bIsNaN ) ? b : a;
+    }
+    else {
+        return b;
+    }
+
+}
+
+#ifdef FLOATX80
+
+/*
+-------------------------------------------------------------------------------
+The pattern for a default generated extended double-precision NaN.  The
+`high' and `low' values hold the most- and least-significant bits,
+respectively.
+-------------------------------------------------------------------------------
+*/
+#define floatx80_default_nan_high 0xFFFF
+#define floatx80_default_nan_low  LIT64( 0xFFFFFFFFFFFFFFFF )
+
+/*
+-------------------------------------------------------------------------------
+Returns 1 if the extended double-precision floating-point value `a' is a
+NaN; otherwise returns 0.
+-------------------------------------------------------------------------------
+*/
+flag floatx80_is_nan( floatx80 a )
+{
+
+    return ( ( a.high & 0x7FFF ) == 0x7FFF ) && (bits64) ( a.low<<1 );
+
+}
+
+/*
+-------------------------------------------------------------------------------
+Returns 1 if the extended double-precision floating-point value `a' is a
+signaling NaN; otherwise returns 0.
+-------------------------------------------------------------------------------
+*/
+flag floatx80_is_signaling_nan( floatx80 a )
+{
+    //register int lr;
+    bits64 aLow;
+
+    //__asm__("mov %0, lr" : : "g" (lr));
+    //fp_printk("floatx80_is_signalling_nan() called from 0x%08x\n",lr);
+    aLow = a.low & ~ LIT64( 0x4000000000000000 );
+    return
+           ( ( a.high & 0x7FFF ) == 0x7FFF )
+        && (bits64) ( aLow<<1 )
+        && ( a.low == aLow );
+
+}
+
+/*
+-------------------------------------------------------------------------------
+Returns the result of converting the extended double-precision floating-
+point NaN `a' to the canonical NaN format.  If `a' is a signaling NaN, the
+invalid exception is raised.
+-------------------------------------------------------------------------------
+*/
+static commonNaNT floatx80ToCommonNaN( floatx80 a )
+{
+    commonNaNT z;
+
+    if ( floatx80_is_signaling_nan( a ) ) float_raise( float_flag_invalid );
+    z.sign = a.high>>15;
+    z.low = 0;
+    z.high = a.low<<1;
+    return z;
+
+}
+
+/*
+-------------------------------------------------------------------------------
+Returns the result of converting the canonical NaN `a' to the extended
+double-precision floating-point format.
+-------------------------------------------------------------------------------
+*/
+static floatx80 commonNaNToFloatx80( commonNaNT a )
+{
+    floatx80 z;
+
+    z.low = LIT64( 0xC000000000000000 ) | ( a.high>>1 );
+    z.high = ( ( (bits16) a.sign )<<15 ) | 0x7FFF;
+    z.__padding = 0;
+    return z;
+
+}
+
+/*
+-------------------------------------------------------------------------------
+Takes two extended double-precision floating-point values `a' and `b', one
+of which is a NaN, and returns the appropriate NaN result.  If either `a' or
+`b' is a signaling NaN, the invalid exception is raised.
+-------------------------------------------------------------------------------
+*/
+static floatx80 propagateFloatx80NaN( floatx80 a, floatx80 b )
+{
+    flag aIsNaN, aIsSignalingNaN, bIsNaN, bIsSignalingNaN;
+
+    aIsNaN = floatx80_is_nan( a );
+    aIsSignalingNaN = floatx80_is_signaling_nan( a );
+    bIsNaN = floatx80_is_nan( b );
+    bIsSignalingNaN = floatx80_is_signaling_nan( b );
+    a.low |= LIT64( 0xC000000000000000 );
+    b.low |= LIT64( 0xC000000000000000 );
+    if ( aIsSignalingNaN | bIsSignalingNaN ) float_raise( float_flag_invalid );
+    if ( aIsNaN ) {
+        return ( aIsSignalingNaN & bIsNaN ) ? b : a;
+    }
+    else {
+        return b;
+    }
+
+}
+
+#endif
diff --git a/arch/arm/nwfpe/softfloat.c b/arch/arm/nwfpe/softfloat.c
new file mode 100644
index 000000000..ffa6b4387
--- /dev/null
+++ b/arch/arm/nwfpe/softfloat.c
@@ -0,0 +1,3435 @@
+/*
+===============================================================================
+
+This C source file is part of the SoftFloat IEC/IEEE Floating-point
+Arithmetic Package, Release 2.
+
+Written by John R. Hauser.  This work was made possible in part by the
+International Computer Science Institute, located at Suite 600, 1947 Center
+Street, Berkeley, California 94704.  Funding was partially provided by the
+National Science Foundation under grant MIP-9311980.  The original version
+of this code was written as part of a project to build a fixed-point vector
+processor in collaboration with the University of California at Berkeley,
+overseen by Profs. Nelson Morgan and John Wawrzynek.  More information
+is available through the web page
+http://www.jhauser.us/arithmetic/SoftFloat-2b/SoftFloat-source.txt
+
+THIS SOFTWARE IS DISTRIBUTED AS IS, FOR FREE.  Although reasonable effort
+has been made to avoid it, THIS SOFTWARE MAY CONTAIN FAULTS THAT WILL AT
+TIMES RESULT IN INCORRECT BEHAVIOR.  USE OF THIS SOFTWARE IS RESTRICTED TO
+PERSONS AND ORGANIZATIONS WHO CAN AND WILL TAKE FULL RESPONSIBILITY FOR ANY
+AND ALL LOSSES, COSTS, OR OTHER PROBLEMS ARISING FROM ITS USE.
+
+Derivative works are acceptable, even for commercial purposes, so long as
+(1) they include prominent notice that the work is derivative, and (2) they
+include prominent notice akin to these three paragraphs for those parts of
+this code that are retained.
+
+===============================================================================
+*/
+
+#include <asm/div64.h>
+
+#include "fpa11.h"
+//#include "milieu.h"
+//#include "softfloat.h"
+
+/*
+-------------------------------------------------------------------------------
+Primitive arithmetic functions, including multi-word arithmetic, and
+division and square root approximations.  (Can be specialized to target if
+desired.)
+-------------------------------------------------------------------------------
+*/
+#include "softfloat-macros"
+
+/*
+-------------------------------------------------------------------------------
+Functions and definitions to determine:  (1) whether tininess for underflow
+is detected before or after rounding by default, (2) what (if anything)
+happens when exceptions are raised, (3) how signaling NaNs are distinguished
+from quiet NaNs, (4) the default generated quiet NaNs, and (5) how NaNs
+are propagated from function inputs to output.  These details are target-
+specific.
+-------------------------------------------------------------------------------
+*/
+#include "softfloat-specialize"
+
+/*
+-------------------------------------------------------------------------------
+Takes a 64-bit fixed-point value `absZ' with binary point between bits 6
+and 7, and returns the properly rounded 32-bit integer corresponding to the
+input.  If `zSign' is nonzero, the input is negated before being converted
+to an integer.  Bit 63 of `absZ' must be zero.  Ordinarily, the fixed-point
+input is simply rounded to an integer, with the inexact exception raised if
+the input cannot be represented exactly as an integer.  If the fixed-point
+input is too large, however, the invalid exception is raised and the largest
+positive or negative integer is returned.
+-------------------------------------------------------------------------------
+*/
+static int32 roundAndPackInt32( struct roundingData *roundData, flag zSign, bits64 absZ )
+{
+    int8 roundingMode;
+    flag roundNearestEven;
+    int8 roundIncrement, roundBits;
+    int32 z;
+
+    roundingMode = roundData->mode;
+    roundNearestEven = ( roundingMode == float_round_nearest_even );
+    roundIncrement = 0x40;
+    if ( ! roundNearestEven ) {
+        if ( roundingMode == float_round_to_zero ) {
+            roundIncrement = 0;
+        }
+        else {
+            roundIncrement = 0x7F;
+            if ( zSign ) {
+                if ( roundingMode == float_round_up ) roundIncrement = 0;
+            }
+            else {
+                if ( roundingMode == float_round_down ) roundIncrement = 0;
+            }
+        }
+    }
+    roundBits = absZ & 0x7F;
+    absZ = ( absZ + roundIncrement )>>7;
+    absZ &= ~ ( ( ( roundBits ^ 0x40 ) == 0 ) & roundNearestEven );
+    z = absZ;
+    if ( zSign ) z = - z;
+    if ( ( absZ>>32 ) || ( z && ( ( z < 0 ) ^ zSign ) ) ) {
+        roundData->exception |= float_flag_invalid;
+        return zSign ? 0x80000000 : 0x7FFFFFFF;
+    }
+    if ( roundBits ) roundData->exception |= float_flag_inexact;
+    return z;
+
+}
+
+/*
+-------------------------------------------------------------------------------
+Returns the fraction bits of the single-precision floating-point value `a'.
+-------------------------------------------------------------------------------
+*/
+INLINE bits32 extractFloat32Frac( float32 a )
+{
+
+    return a & 0x007FFFFF;
+
+}
+
+/*
+-------------------------------------------------------------------------------
+Returns the exponent bits of the single-precision floating-point value `a'.
+-------------------------------------------------------------------------------
+*/
+INLINE int16 extractFloat32Exp( float32 a )
+{
+
+    return ( a>>23 ) & 0xFF;
+
+}
+
+/*
+-------------------------------------------------------------------------------
+Returns the sign bit of the single-precision floating-point value `a'.
+-------------------------------------------------------------------------------
+*/
+#if 0	/* in softfloat.h */
+INLINE flag extractFloat32Sign( float32 a )
+{
+
+    return a>>31;
+
+}
+#endif
+
+/*
+-------------------------------------------------------------------------------
+Normalizes the subnormal single-precision floating-point value represented
+by the denormalized significand `aSig'.  The normalized exponent and
+significand are stored at the locations pointed to by `zExpPtr' and
+`zSigPtr', respectively.
+-------------------------------------------------------------------------------
+*/
+static void
+ normalizeFloat32Subnormal( bits32 aSig, int16 *zExpPtr, bits32 *zSigPtr )
+{
+    int8 shiftCount;
+
+    shiftCount = countLeadingZeros32( aSig ) - 8;
+    *zSigPtr = aSig<<shiftCount;
+    *zExpPtr = 1 - shiftCount;
+
+}
+
+/*
+-------------------------------------------------------------------------------
+Packs the sign `zSign', exponent `zExp', and significand `zSig' into a
+single-precision floating-point value, returning the result.  After being
+shifted into the proper positions, the three fields are simply added
+together to form the result.  This means that any integer portion of `zSig'
+will be added into the exponent.  Since a properly normalized significand
+will have an integer portion equal to 1, the `zExp' input should be 1 less
+than the desired result exponent whenever `zSig' is a complete, normalized
+significand.
+-------------------------------------------------------------------------------
+*/
+INLINE float32 packFloat32( flag zSign, int16 zExp, bits32 zSig )
+{
+#if 0
+   float32 f;
+   __asm__("@ packFloat32				\n\
+   	    mov %0, %1, asl #31				\n\
+   	    orr %0, %2, asl #23				\n\
+   	    orr %0, %3"
+   	    : /* no outputs */
+   	    : "g" (f), "g" (zSign), "g" (zExp), "g" (zSig)
+   	    : "cc");
+   return f;
+#else
+    return ( ( (bits32) zSign )<<31 ) + ( ( (bits32) zExp )<<23 ) + zSig;
+#endif 
+}
+
+/*
+-------------------------------------------------------------------------------
+Takes an abstract floating-point value having sign `zSign', exponent `zExp',
+and significand `zSig', and returns the proper single-precision floating-
+point value corresponding to the abstract input.  Ordinarily, the abstract
+value is simply rounded and packed into the single-precision format, with
+the inexact exception raised if the abstract input cannot be represented
+exactly.  If the abstract value is too large, however, the overflow and
+inexact exceptions are raised and an infinity or maximal finite value is
+returned.  If the abstract value is too small, the input value is rounded to
+a subnormal number, and the underflow and inexact exceptions are raised if
+the abstract input cannot be represented exactly as a subnormal single-
+precision floating-point number.
+    The input significand `zSig' has its binary point between bits 30
+and 29, which is 7 bits to the left of the usual location.  This shifted
+significand must be normalized or smaller.  If `zSig' is not normalized,
+`zExp' must be 0; in that case, the result returned is a subnormal number,
+and it must not require rounding.  In the usual case that `zSig' is
+normalized, `zExp' must be 1 less than the ``true'' floating-point exponent.
+The handling of underflow and overflow follows the IEC/IEEE Standard for
+Binary Floating-point Arithmetic.
+-------------------------------------------------------------------------------
+*/
+static float32 roundAndPackFloat32( struct roundingData *roundData, flag zSign, int16 zExp, bits32 zSig )
+{
+    int8 roundingMode;
+    flag roundNearestEven;
+    int8 roundIncrement, roundBits;
+    flag isTiny;
+
+    roundingMode = roundData->mode;
+    roundNearestEven = ( roundingMode == float_round_nearest_even );
+    roundIncrement = 0x40;
+    if ( ! roundNearestEven ) {
+        if ( roundingMode == float_round_to_zero ) {
+            roundIncrement = 0;
+        }
+        else {
+            roundIncrement = 0x7F;
+            if ( zSign ) {
+                if ( roundingMode == float_round_up ) roundIncrement = 0;
+            }
+            else {
+                if ( roundingMode == float_round_down ) roundIncrement = 0;
+            }
+        }
+    }
+    roundBits = zSig & 0x7F;
+    if ( 0xFD <= (bits16) zExp ) {
+        if (    ( 0xFD < zExp )
+             || (    ( zExp == 0xFD )
+                  && ( (sbits32) ( zSig + roundIncrement ) < 0 ) )
+           ) {
+            roundData->exception |= float_flag_overflow | float_flag_inexact;
+            return packFloat32( zSign, 0xFF, 0 ) - ( roundIncrement == 0 );
+        }
+        if ( zExp < 0 ) {
+            isTiny =
+                   ( float_detect_tininess == float_tininess_before_rounding )
+                || ( zExp < -1 )
+                || ( zSig + roundIncrement < 0x80000000 );
+            shift32RightJamming( zSig, - zExp, &zSig );
+            zExp = 0;
+            roundBits = zSig & 0x7F;
+            if ( isTiny && roundBits ) roundData->exception |= float_flag_underflow;
+        }
+    }
+    if ( roundBits ) roundData->exception |= float_flag_inexact;
+    zSig = ( zSig + roundIncrement )>>7;
+    zSig &= ~ ( ( ( roundBits ^ 0x40 ) == 0 ) & roundNearestEven );
+    if ( zSig == 0 ) zExp = 0;
+    return packFloat32( zSign, zExp, zSig );
+
+}
+
+/*
+-------------------------------------------------------------------------------
+Takes an abstract floating-point value having sign `zSign', exponent `zExp',
+and significand `zSig', and returns the proper single-precision floating-
+point value corresponding to the abstract input.  This routine is just like
+`roundAndPackFloat32' except that `zSig' does not have to be normalized in
+any way.  In all cases, `zExp' must be 1 less than the ``true'' floating-
+point exponent.
+-------------------------------------------------------------------------------
+*/
+static float32
+ normalizeRoundAndPackFloat32( struct roundingData *roundData, flag zSign, int16 zExp, bits32 zSig )
+{
+    int8 shiftCount;
+
+    shiftCount = countLeadingZeros32( zSig ) - 1;
+    return roundAndPackFloat32( roundData, zSign, zExp - shiftCount, zSig<<shiftCount );
+
+}
+
+/*
+-------------------------------------------------------------------------------
+Returns the fraction bits of the double-precision floating-point value `a'.
+-------------------------------------------------------------------------------
+*/
+INLINE bits64 extractFloat64Frac( float64 a )
+{
+
+    return a & LIT64( 0x000FFFFFFFFFFFFF );
+
+}
+
+/*
+-------------------------------------------------------------------------------
+Returns the exponent bits of the double-precision floating-point value `a'.
+-------------------------------------------------------------------------------
+*/
+INLINE int16 extractFloat64Exp( float64 a )
+{
+
+    return ( a>>52 ) & 0x7FF;
+
+}
+
+/*
+-------------------------------------------------------------------------------
+Returns the sign bit of the double-precision floating-point value `a'.
+-------------------------------------------------------------------------------
+*/
+#if 0	/* in softfloat.h */
+INLINE flag extractFloat64Sign( float64 a )
+{
+
+    return a>>63;
+
+}
+#endif
+
+/*
+-------------------------------------------------------------------------------
+Normalizes the subnormal double-precision floating-point value represented
+by the denormalized significand `aSig'.  The normalized exponent and
+significand are stored at the locations pointed to by `zExpPtr' and
+`zSigPtr', respectively.
+-------------------------------------------------------------------------------
+*/
+static void
+ normalizeFloat64Subnormal( bits64 aSig, int16 *zExpPtr, bits64 *zSigPtr )
+{
+    int8 shiftCount;
+
+    shiftCount = countLeadingZeros64( aSig ) - 11;
+    *zSigPtr = aSig<<shiftCount;
+    *zExpPtr = 1 - shiftCount;
+
+}
+
+/*
+-------------------------------------------------------------------------------
+Packs the sign `zSign', exponent `zExp', and significand `zSig' into a
+double-precision floating-point value, returning the result.  After being
+shifted into the proper positions, the three fields are simply added
+together to form the result.  This means that any integer portion of `zSig'
+will be added into the exponent.  Since a properly normalized significand
+will have an integer portion equal to 1, the `zExp' input should be 1 less
+than the desired result exponent whenever `zSig' is a complete, normalized
+significand.
+-------------------------------------------------------------------------------
+*/
+INLINE float64 packFloat64( flag zSign, int16 zExp, bits64 zSig )
+{
+
+    return ( ( (bits64) zSign )<<63 ) + ( ( (bits64) zExp )<<52 ) + zSig;
+
+}
+
+/*
+-------------------------------------------------------------------------------
+Takes an abstract floating-point value having sign `zSign', exponent `zExp',
+and significand `zSig', and returns the proper double-precision floating-
+point value corresponding to the abstract input.  Ordinarily, the abstract
+value is simply rounded and packed into the double-precision format, with
+the inexact exception raised if the abstract input cannot be represented
+exactly.  If the abstract value is too large, however, the overflow and
+inexact exceptions are raised and an infinity or maximal finite value is
+returned.  If the abstract value is too small, the input value is rounded to
+a subnormal number, and the underflow and inexact exceptions are raised if
+the abstract input cannot be represented exactly as a subnormal double-
+precision floating-point number.
+    The input significand `zSig' has its binary point between bits 62
+and 61, which is 10 bits to the left of the usual location.  This shifted
+significand must be normalized or smaller.  If `zSig' is not normalized,
+`zExp' must be 0; in that case, the result returned is a subnormal number,
+and it must not require rounding.  In the usual case that `zSig' is
+normalized, `zExp' must be 1 less than the ``true'' floating-point exponent.
+The handling of underflow and overflow follows the IEC/IEEE Standard for
+Binary Floating-point Arithmetic.
+-------------------------------------------------------------------------------
+*/
+static float64 roundAndPackFloat64( struct roundingData *roundData, flag zSign, int16 zExp, bits64 zSig )
+{
+    int8 roundingMode;
+    flag roundNearestEven;
+    int16 roundIncrement, roundBits;
+    flag isTiny;
+
+    roundingMode = roundData->mode;
+    roundNearestEven = ( roundingMode == float_round_nearest_even );
+    roundIncrement = 0x200;
+    if ( ! roundNearestEven ) {
+        if ( roundingMode == float_round_to_zero ) {
+            roundIncrement = 0;
+        }
+        else {
+            roundIncrement = 0x3FF;
+            if ( zSign ) {
+                if ( roundingMode == float_round_up ) roundIncrement = 0;
+            }
+            else {
+                if ( roundingMode == float_round_down ) roundIncrement = 0;
+            }
+        }
+    }
+    roundBits = zSig & 0x3FF;
+    if ( 0x7FD <= (bits16) zExp ) {
+        if (    ( 0x7FD < zExp )
+             || (    ( zExp == 0x7FD )
+                  && ( (sbits64) ( zSig + roundIncrement ) < 0 ) )
+           ) {
+            //register int lr = __builtin_return_address(0);
+            //printk("roundAndPackFloat64 called from 0x%08x\n",lr);
+            roundData->exception |= float_flag_overflow | float_flag_inexact;
+            return packFloat64( zSign, 0x7FF, 0 ) - ( roundIncrement == 0 );
+        }
+        if ( zExp < 0 ) {
+            isTiny =
+                   ( float_detect_tininess == float_tininess_before_rounding )
+                || ( zExp < -1 )
+                || ( zSig + roundIncrement < LIT64( 0x8000000000000000 ) );
+            shift64RightJamming( zSig, - zExp, &zSig );
+            zExp = 0;
+            roundBits = zSig & 0x3FF;
+            if ( isTiny && roundBits ) roundData->exception |= float_flag_underflow;
+        }
+    }
+    if ( roundBits ) roundData->exception |= float_flag_inexact;
+    zSig = ( zSig + roundIncrement )>>10;
+    zSig &= ~ ( ( ( roundBits ^ 0x200 ) == 0 ) & roundNearestEven );
+    if ( zSig == 0 ) zExp = 0;
+    return packFloat64( zSign, zExp, zSig );
+
+}
+
+/*
+-------------------------------------------------------------------------------
+Takes an abstract floating-point value having sign `zSign', exponent `zExp',
+and significand `zSig', and returns the proper double-precision floating-
+point value corresponding to the abstract input.  This routine is just like
+`roundAndPackFloat64' except that `zSig' does not have to be normalized in
+any way.  In all cases, `zExp' must be 1 less than the ``true'' floating-
+point exponent.
+-------------------------------------------------------------------------------
+*/
+static float64
+ normalizeRoundAndPackFloat64( struct roundingData *roundData, flag zSign, int16 zExp, bits64 zSig )
+{
+    int8 shiftCount;
+
+    shiftCount = countLeadingZeros64( zSig ) - 1;
+    return roundAndPackFloat64( roundData, zSign, zExp - shiftCount, zSig<<shiftCount );
+
+}
+
+#ifdef FLOATX80
+
+/*
+-------------------------------------------------------------------------------
+Returns the fraction bits of the extended double-precision floating-point
+value `a'.
+-------------------------------------------------------------------------------
+*/
+INLINE bits64 extractFloatx80Frac( floatx80 a )
+{
+
+    return a.low;
+
+}
+
+/*
+-------------------------------------------------------------------------------
+Returns the exponent bits of the extended double-precision floating-point
+value `a'.
+-------------------------------------------------------------------------------
+*/
+INLINE int32 extractFloatx80Exp( floatx80 a )
+{
+
+    return a.high & 0x7FFF;
+
+}
+
+/*
+-------------------------------------------------------------------------------
+Returns the sign bit of the extended double-precision floating-point value
+`a'.
+-------------------------------------------------------------------------------
+*/
+INLINE flag extractFloatx80Sign( floatx80 a )
+{
+
+    return a.high>>15;
+
+}
+
+/*
+-------------------------------------------------------------------------------
+Normalizes the subnormal extended double-precision floating-point value
+represented by the denormalized significand `aSig'.  The normalized exponent
+and significand are stored at the locations pointed to by `zExpPtr' and
+`zSigPtr', respectively.
+-------------------------------------------------------------------------------
+*/
+static void
+ normalizeFloatx80Subnormal( bits64 aSig, int32 *zExpPtr, bits64 *zSigPtr )
+{
+    int8 shiftCount;
+
+    shiftCount = countLeadingZeros64( aSig );
+    *zSigPtr = aSig<<shiftCount;
+    *zExpPtr = 1 - shiftCount;
+
+}
+
+/*
+-------------------------------------------------------------------------------
+Packs the sign `zSign', exponent `zExp', and significand `zSig' into an
+extended double-precision floating-point value, returning the result.
+-------------------------------------------------------------------------------
+*/
+INLINE floatx80 packFloatx80( flag zSign, int32 zExp, bits64 zSig )
+{
+    floatx80 z;
+
+    z.low = zSig;
+    z.high = ( ( (bits16) zSign )<<15 ) + zExp;
+    z.__padding = 0;
+    return z;
+
+}
+
+/*
+-------------------------------------------------------------------------------
+Takes an abstract floating-point value having sign `zSign', exponent `zExp',
+and extended significand formed by the concatenation of `zSig0' and `zSig1',
+and returns the proper extended double-precision floating-point value
+corresponding to the abstract input.  Ordinarily, the abstract value is
+rounded and packed into the extended double-precision format, with the
+inexact exception raised if the abstract input cannot be represented
+exactly.  If the abstract value is too large, however, the overflow and
+inexact exceptions are raised and an infinity or maximal finite value is
+returned.  If the abstract value is too small, the input value is rounded to
+a subnormal number, and the underflow and inexact exceptions are raised if
+the abstract input cannot be represented exactly as a subnormal extended
+double-precision floating-point number.
+    If `roundingPrecision' is 32 or 64, the result is rounded to the same
+number of bits as single or double precision, respectively.  Otherwise, the
+result is rounded to the full precision of the extended double-precision
+format.
+    The input significand must be normalized or smaller.  If the input
+significand is not normalized, `zExp' must be 0; in that case, the result
+returned is a subnormal number, and it must not require rounding.  The
+handling of underflow and overflow follows the IEC/IEEE Standard for Binary
+Floating-point Arithmetic.
+-------------------------------------------------------------------------------
+*/
+static floatx80
+ roundAndPackFloatx80(
+     struct roundingData *roundData, flag zSign, int32 zExp, bits64 zSig0, bits64 zSig1
+ )
+{
+    int8 roundingMode, roundingPrecision;
+    flag roundNearestEven, increment, isTiny;
+    int64 roundIncrement, roundMask, roundBits;
+
+    roundingMode = roundData->mode;
+    roundingPrecision = roundData->precision;
+    roundNearestEven = ( roundingMode == float_round_nearest_even );
+    if ( roundingPrecision == 80 ) goto precision80;
+    if ( roundingPrecision == 64 ) {
+        roundIncrement = LIT64( 0x0000000000000400 );
+        roundMask = LIT64( 0x00000000000007FF );
+    }
+    else if ( roundingPrecision == 32 ) {
+        roundIncrement = LIT64( 0x0000008000000000 );
+        roundMask = LIT64( 0x000000FFFFFFFFFF );
+    }
+    else {
+        goto precision80;
+    }
+    zSig0 |= ( zSig1 != 0 );
+    if ( ! roundNearestEven ) {
+        if ( roundingMode == float_round_to_zero ) {
+            roundIncrement = 0;
+        }
+        else {
+            roundIncrement = roundMask;
+            if ( zSign ) {
+                if ( roundingMode == float_round_up ) roundIncrement = 0;
+            }
+            else {
+                if ( roundingMode == float_round_down ) roundIncrement = 0;
+            }
+        }
+    }
+    roundBits = zSig0 & roundMask;
+    if ( 0x7FFD <= (bits32) ( zExp - 1 ) ) {
+        if (    ( 0x7FFE < zExp )
+             || ( ( zExp == 0x7FFE ) && ( zSig0 + roundIncrement < zSig0 ) )
+           ) {
+            goto overflow;
+        }
+        if ( zExp <= 0 ) {
+            isTiny =
+                   ( float_detect_tininess == float_tininess_before_rounding )
+                || ( zExp < 0 )
+                || ( zSig0 <= zSig0 + roundIncrement );
+            shift64RightJamming( zSig0, 1 - zExp, &zSig0 );
+            zExp = 0;
+            roundBits = zSig0 & roundMask;
+            if ( isTiny && roundBits ) roundData->exception |= float_flag_underflow;
+            if ( roundBits ) roundData->exception |= float_flag_inexact;
+            zSig0 += roundIncrement;
+            if ( (sbits64) zSig0 < 0 ) zExp = 1;
+            roundIncrement = roundMask + 1;
+            if ( roundNearestEven && ( roundBits<<1 == roundIncrement ) ) {
+                roundMask |= roundIncrement;
+            }
+            zSig0 &= ~ roundMask;
+            return packFloatx80( zSign, zExp, zSig0 );
+        }
+    }
+    if ( roundBits ) roundData->exception |= float_flag_inexact;
+    zSig0 += roundIncrement;
+    if ( zSig0 < roundIncrement ) {
+        ++zExp;
+        zSig0 = LIT64( 0x8000000000000000 );
+    }
+    roundIncrement = roundMask + 1;
+    if ( roundNearestEven && ( roundBits<<1 == roundIncrement ) ) {
+        roundMask |= roundIncrement;
+    }
+    zSig0 &= ~ roundMask;
+    if ( zSig0 == 0 ) zExp = 0;
+    return packFloatx80( zSign, zExp, zSig0 );
+ precision80:
+    increment = ( (sbits64) zSig1 < 0 );
+    if ( ! roundNearestEven ) {
+        if ( roundingMode == float_round_to_zero ) {
+            increment = 0;
+        }
+        else {
+            if ( zSign ) {
+                increment = ( roundingMode == float_round_down ) && zSig1;
+            }
+            else {
+                increment = ( roundingMode == float_round_up ) && zSig1;
+            }
+        }
+    }
+    if ( 0x7FFD <= (bits32) ( zExp - 1 ) ) {
+        if (    ( 0x7FFE < zExp )
+             || (    ( zExp == 0x7FFE )
+                  && ( zSig0 == LIT64( 0xFFFFFFFFFFFFFFFF ) )
+                  && increment
+                )
+           ) {
+            roundMask = 0;
+ overflow:
+            roundData->exception |= float_flag_overflow | float_flag_inexact;
+            if (    ( roundingMode == float_round_to_zero )
+                 || ( zSign && ( roundingMode == float_round_up ) )
+                 || ( ! zSign && ( roundingMode == float_round_down ) )
+               ) {
+                return packFloatx80( zSign, 0x7FFE, ~ roundMask );
+            }
+            return packFloatx80( zSign, 0x7FFF, LIT64( 0x8000000000000000 ) );
+        }
+        if ( zExp <= 0 ) {
+            isTiny =
+                   ( float_detect_tininess == float_tininess_before_rounding )
+                || ( zExp < 0 )
+                || ! increment
+                || ( zSig0 < LIT64( 0xFFFFFFFFFFFFFFFF ) );
+            shift64ExtraRightJamming( zSig0, zSig1, 1 - zExp, &zSig0, &zSig1 );
+            zExp = 0;
+            if ( isTiny && zSig1 ) roundData->exception |= float_flag_underflow;
+            if ( zSig1 ) roundData->exception |= float_flag_inexact;
+            if ( roundNearestEven ) {
+                increment = ( (sbits64) zSig1 < 0 );
+            }
+            else {
+                if ( zSign ) {
+                    increment = ( roundingMode == float_round_down ) && zSig1;
+                }
+                else {
+                    increment = ( roundingMode == float_round_up ) && zSig1;
+                }
+            }
+            if ( increment ) {
+                ++zSig0;
+                zSig0 &= ~ ( ( zSig1 + zSig1 == 0 ) & roundNearestEven );
+                if ( (sbits64) zSig0 < 0 ) zExp = 1;
+            }
+            return packFloatx80( zSign, zExp, zSig0 );
+        }
+    }
+    if ( zSig1 ) roundData->exception |= float_flag_inexact;
+    if ( increment ) {
+        ++zSig0;
+        if ( zSig0 == 0 ) {
+            ++zExp;
+            zSig0 = LIT64( 0x8000000000000000 );
+        }
+        else {
+            zSig0 &= ~ ( ( zSig1 + zSig1 == 0 ) & roundNearestEven );
+        }
+    }
+    else {
+        if ( zSig0 == 0 ) zExp = 0;
+    }
+    
+    return packFloatx80( zSign, zExp, zSig0 );
+}
+
+/*
+-------------------------------------------------------------------------------
+Takes an abstract floating-point value having sign `zSign', exponent
+`zExp', and significand formed by the concatenation of `zSig0' and `zSig1',
+and returns the proper extended double-precision floating-point value
+corresponding to the abstract input.  This routine is just like
+`roundAndPackFloatx80' except that the input significand does not have to be
+normalized.
+-------------------------------------------------------------------------------
+*/
+static floatx80
+ normalizeRoundAndPackFloatx80(
+     struct roundingData *roundData, flag zSign, int32 zExp, bits64 zSig0, bits64 zSig1
+ )
+{
+    int8 shiftCount;
+
+    if ( zSig0 == 0 ) {
+        zSig0 = zSig1;
+        zSig1 = 0;
+        zExp -= 64;
+    }
+    shiftCount = countLeadingZeros64( zSig0 );
+    shortShift128Left( zSig0, zSig1, shiftCount, &zSig0, &zSig1 );
+    zExp -= shiftCount;
+    return
+        roundAndPackFloatx80( roundData, zSign, zExp, zSig0, zSig1 );
+
+}
+
+#endif
+
+/*
+-------------------------------------------------------------------------------
+Returns the result of converting the 32-bit two's complement integer `a' to
+the single-precision floating-point format.  The conversion is performed
+according to the IEC/IEEE Standard for Binary Floating-point Arithmetic.
+-------------------------------------------------------------------------------
+*/
+float32 int32_to_float32(struct roundingData *roundData, int32 a)
+{
+    flag zSign;
+
+    if ( a == 0 ) return 0;
+    if ( a == 0x80000000 ) return packFloat32( 1, 0x9E, 0 );
+    zSign = ( a < 0 );
+    return normalizeRoundAndPackFloat32( roundData, zSign, 0x9C, zSign ? - a : a );
+
+}
+
+/*
+-------------------------------------------------------------------------------
+Returns the result of converting the 32-bit two's complement integer `a' to
+the double-precision floating-point format.  The conversion is performed
+according to the IEC/IEEE Standard for Binary Floating-point Arithmetic.
+-------------------------------------------------------------------------------
+*/
+float64 int32_to_float64( int32 a )
+{
+    flag aSign;
+    uint32 absA;
+    int8 shiftCount;
+    bits64 zSig;
+
+    if ( a == 0 ) return 0;
+    aSign = ( a < 0 );
+    absA = aSign ? - a : a;
+    shiftCount = countLeadingZeros32( absA ) + 21;
+    zSig = absA;
+    return packFloat64( aSign, 0x432 - shiftCount, zSig<<shiftCount );
+
+}
+
+#ifdef FLOATX80
+
+/*
+-------------------------------------------------------------------------------
+Returns the result of converting the 32-bit two's complement integer `a'
+to the extended double-precision floating-point format.  The conversion
+is performed according to the IEC/IEEE Standard for Binary Floating-point
+Arithmetic.
+-------------------------------------------------------------------------------
+*/
+floatx80 int32_to_floatx80( int32 a )
+{
+    flag zSign;
+    uint32 absA;
+    int8 shiftCount;
+    bits64 zSig;
+
+    if ( a == 0 ) return packFloatx80( 0, 0, 0 );
+    zSign = ( a < 0 );
+    absA = zSign ? - a : a;
+    shiftCount = countLeadingZeros32( absA ) + 32;
+    zSig = absA;
+    return packFloatx80( zSign, 0x403E - shiftCount, zSig<<shiftCount );
+
+}
+
+#endif
+
+/*
+-------------------------------------------------------------------------------
+Returns the result of converting the single-precision floating-point value
+`a' to the 32-bit two's complement integer format.  The conversion is
+performed according to the IEC/IEEE Standard for Binary Floating-point
+Arithmetic---which means in particular that the conversion is rounded
+according to the current rounding mode.  If `a' is a NaN, the largest
+positive integer is returned.  Otherwise, if the conversion overflows, the
+largest integer with the same sign as `a' is returned.
+-------------------------------------------------------------------------------
+*/
+int32 float32_to_int32( struct roundingData *roundData, float32 a )
+{
+    flag aSign;
+    int16 aExp, shiftCount;
+    bits32 aSig;
+    bits64 zSig;
+
+    aSig = extractFloat32Frac( a );
+    aExp = extractFloat32Exp( a );
+    aSign = extractFloat32Sign( a );
+    if ( ( aExp == 0x7FF ) && aSig ) aSign = 0;
+    if ( aExp ) aSig |= 0x00800000;
+    shiftCount = 0xAF - aExp;
+    zSig = aSig;
+    zSig <<= 32;
+    if ( 0 < shiftCount ) shift64RightJamming( zSig, shiftCount, &zSig );
+    return roundAndPackInt32( roundData, aSign, zSig );
+
+}
+
+/*
+-------------------------------------------------------------------------------
+Returns the result of converting the single-precision floating-point value
+`a' to the 32-bit two's complement integer format.  The conversion is
+performed according to the IEC/IEEE Standard for Binary Floating-point
+Arithmetic, except that the conversion is always rounded toward zero.  If
+`a' is a NaN, the largest positive integer is returned.  Otherwise, if the
+conversion overflows, the largest integer with the same sign as `a' is
+returned.
+-------------------------------------------------------------------------------
+*/
+int32 float32_to_int32_round_to_zero( float32 a )
+{
+    flag aSign;
+    int16 aExp, shiftCount;
+    bits32 aSig;
+    int32 z;
+
+    aSig = extractFloat32Frac( a );
+    aExp = extractFloat32Exp( a );
+    aSign = extractFloat32Sign( a );
+    shiftCount = aExp - 0x9E;
+    if ( 0 <= shiftCount ) {
+        if ( a == 0xCF000000 ) return 0x80000000;
+        float_raise( float_flag_invalid );
+        if ( ! aSign || ( ( aExp == 0xFF ) && aSig ) ) return 0x7FFFFFFF;
+        return 0x80000000;
+    }
+    else if ( aExp <= 0x7E ) {
+        if ( aExp | aSig ) float_raise( float_flag_inexact );
+        return 0;
+    }
+    aSig = ( aSig | 0x00800000 )<<8;
+    z = aSig>>( - shiftCount );
+    if ( (bits32) ( aSig<<( shiftCount & 31 ) ) ) {
+        float_raise( float_flag_inexact );
+    }
+    return aSign ? - z : z;
+
+}
+
+/*
+-------------------------------------------------------------------------------
+Returns the result of converting the single-precision floating-point value
+`a' to the double-precision floating-point format.  The conversion is
+performed according to the IEC/IEEE Standard for Binary Floating-point
+Arithmetic.
+-------------------------------------------------------------------------------
+*/
+float64 float32_to_float64( float32 a )
+{
+    flag aSign;
+    int16 aExp;
+    bits32 aSig;
+
+    aSig = extractFloat32Frac( a );
+    aExp = extractFloat32Exp( a );
+    aSign = extractFloat32Sign( a );
+    if ( aExp == 0xFF ) {
+        if ( aSig ) return commonNaNToFloat64( float32ToCommonNaN( a ) );
+        return packFloat64( aSign, 0x7FF, 0 );
+    }
+    if ( aExp == 0 ) {
+        if ( aSig == 0 ) return packFloat64( aSign, 0, 0 );
+        normalizeFloat32Subnormal( aSig, &aExp, &aSig );
+        --aExp;
+    }
+    return packFloat64( aSign, aExp + 0x380, ( (bits64) aSig )<<29 );
+
+}
+
+#ifdef FLOATX80
+
+/*
+-------------------------------------------------------------------------------
+Returns the result of converting the single-precision floating-point value
+`a' to the extended double-precision floating-point format.  The conversion
+is performed according to the IEC/IEEE Standard for Binary Floating-point
+Arithmetic.
+-------------------------------------------------------------------------------
+*/
+floatx80 float32_to_floatx80( float32 a )
+{
+    flag aSign;
+    int16 aExp;
+    bits32 aSig;
+
+    aSig = extractFloat32Frac( a );
+    aExp = extractFloat32Exp( a );
+    aSign = extractFloat32Sign( a );
+    if ( aExp == 0xFF ) {
+        if ( aSig ) return commonNaNToFloatx80( float32ToCommonNaN( a ) );
+        return packFloatx80( aSign, 0x7FFF, LIT64( 0x8000000000000000 ) );
+    }
+    if ( aExp == 0 ) {
+        if ( aSig == 0 ) return packFloatx80( aSign, 0, 0 );
+        normalizeFloat32Subnormal( aSig, &aExp, &aSig );
+    }
+    aSig |= 0x00800000;
+    return packFloatx80( aSign, aExp + 0x3F80, ( (bits64) aSig )<<40 );
+
+}
+
+#endif
+
+/*
+-------------------------------------------------------------------------------
+Rounds the single-precision floating-point value `a' to an integer, and
+returns the result as a single-precision floating-point value.  The
+operation is performed according to the IEC/IEEE Standard for Binary
+Floating-point Arithmetic.
+-------------------------------------------------------------------------------
+*/
+float32 float32_round_to_int( struct roundingData *roundData, float32 a )
+{
+    flag aSign;
+    int16 aExp;
+    bits32 lastBitMask, roundBitsMask;
+    int8 roundingMode;
+    float32 z;
+
+    aExp = extractFloat32Exp( a );
+    if ( 0x96 <= aExp ) {
+        if ( ( aExp == 0xFF ) && extractFloat32Frac( a ) ) {
+            return propagateFloat32NaN( a, a );
+        }
+        return a;
+    }
+    roundingMode = roundData->mode;
+    if ( aExp <= 0x7E ) {
+        if ( (bits32) ( a<<1 ) == 0 ) return a;
+        roundData->exception |= float_flag_inexact;
+        aSign = extractFloat32Sign( a );
+        switch ( roundingMode ) {
+         case float_round_nearest_even:
+            if ( ( aExp == 0x7E ) && extractFloat32Frac( a ) ) {
+                return packFloat32( aSign, 0x7F, 0 );
+            }
+            break;
+         case float_round_down:
+            return aSign ? 0xBF800000 : 0;
+         case float_round_up:
+            return aSign ? 0x80000000 : 0x3F800000;
+        }
+        return packFloat32( aSign, 0, 0 );
+    }
+    lastBitMask = 1;
+    lastBitMask <<= 0x96 - aExp;
+    roundBitsMask = lastBitMask - 1;
+    z = a;
+    if ( roundingMode == float_round_nearest_even ) {
+        z += lastBitMask>>1;
+        if ( ( z & roundBitsMask ) == 0 ) z &= ~ lastBitMask;
+    }
+    else if ( roundingMode != float_round_to_zero ) {
+        if ( extractFloat32Sign( z ) ^ ( roundingMode == float_round_up ) ) {
+            z += roundBitsMask;
+        }
+    }
+    z &= ~ roundBitsMask;
+    if ( z != a ) roundData->exception |= float_flag_inexact;
+    return z;
+
+}
+
+/*
+-------------------------------------------------------------------------------
+Returns the result of adding the absolute values of the single-precision
+floating-point values `a' and `b'.  If `zSign' is true, the sum is negated
+before being returned.  `zSign' is ignored if the result is a NaN.  The
+addition is performed according to the IEC/IEEE Standard for Binary
+Floating-point Arithmetic.
+-------------------------------------------------------------------------------
+*/
+static float32 addFloat32Sigs( struct roundingData *roundData, float32 a, float32 b, flag zSign )
+{
+    int16 aExp, bExp, zExp;
+    bits32 aSig, bSig, zSig;
+    int16 expDiff;
+
+    aSig = extractFloat32Frac( a );
+    aExp = extractFloat32Exp( a );
+    bSig = extractFloat32Frac( b );
+    bExp = extractFloat32Exp( b );
+    expDiff = aExp - bExp;
+    aSig <<= 6;
+    bSig <<= 6;
+    if ( 0 < expDiff ) {
+        if ( aExp == 0xFF ) {
+            if ( aSig ) return propagateFloat32NaN( a, b );
+            return a;
+        }
+        if ( bExp == 0 ) {
+            --expDiff;
+        }
+        else {
+            bSig |= 0x20000000;
+        }
+        shift32RightJamming( bSig, expDiff, &bSig );
+        zExp = aExp;
+    }
+    else if ( expDiff < 0 ) {
+        if ( bExp == 0xFF ) {
+            if ( bSig ) return propagateFloat32NaN( a, b );
+            return packFloat32( zSign, 0xFF, 0 );
+        }
+        if ( aExp == 0 ) {
+            ++expDiff;
+        }
+        else {
+            aSig |= 0x20000000;
+        }
+        shift32RightJamming( aSig, - expDiff, &aSig );
+        zExp = bExp;
+    }
+    else {
+        if ( aExp == 0xFF ) {
+            if ( aSig | bSig ) return propagateFloat32NaN( a, b );
+            return a;
+        }
+        if ( aExp == 0 ) return packFloat32( zSign, 0, ( aSig + bSig )>>6 );
+        zSig = 0x40000000 + aSig + bSig;
+        zExp = aExp;
+        goto roundAndPack;
+    }
+    aSig |= 0x20000000;
+    zSig = ( aSig + bSig )<<1;
+    --zExp;
+    if ( (sbits32) zSig < 0 ) {
+        zSig = aSig + bSig;
+        ++zExp;
+    }
+ roundAndPack:
+    return roundAndPackFloat32( roundData, zSign, zExp, zSig );
+
+}
+
+/*
+-------------------------------------------------------------------------------
+Returns the result of subtracting the absolute values of the single-
+precision floating-point values `a' and `b'.  If `zSign' is true, the
+difference is negated before being returned.  `zSign' is ignored if the
+result is a NaN.  The subtraction is performed according to the IEC/IEEE
+Standard for Binary Floating-point Arithmetic.
+-------------------------------------------------------------------------------
+*/
+static float32 subFloat32Sigs( struct roundingData *roundData, float32 a, float32 b, flag zSign )
+{
+    int16 aExp, bExp, zExp;
+    bits32 aSig, bSig, zSig;
+    int16 expDiff;
+
+    aSig = extractFloat32Frac( a );
+    aExp = extractFloat32Exp( a );
+    bSig = extractFloat32Frac( b );
+    bExp = extractFloat32Exp( b );
+    expDiff = aExp - bExp;
+    aSig <<= 7;
+    bSig <<= 7;
+    if ( 0 < expDiff ) goto aExpBigger;
+    if ( expDiff < 0 ) goto bExpBigger;
+    if ( aExp == 0xFF ) {
+        if ( aSig | bSig ) return propagateFloat32NaN( a, b );
+        roundData->exception |= float_flag_invalid;
+        return float32_default_nan;
+    }
+    if ( aExp == 0 ) {
+        aExp = 1;
+        bExp = 1;
+    }
+    if ( bSig < aSig ) goto aBigger;
+    if ( aSig < bSig ) goto bBigger;
+    return packFloat32( roundData->mode == float_round_down, 0, 0 );
+ bExpBigger:
+    if ( bExp == 0xFF ) {
+        if ( bSig ) return propagateFloat32NaN( a, b );
+        return packFloat32( zSign ^ 1, 0xFF, 0 );
+    }
+    if ( aExp == 0 ) {
+        ++expDiff;
+    }
+    else {
+        aSig |= 0x40000000;
+    }
+    shift32RightJamming( aSig, - expDiff, &aSig );
+    bSig |= 0x40000000;
+ bBigger:
+    zSig = bSig - aSig;
+    zExp = bExp;
+    zSign ^= 1;
+    goto normalizeRoundAndPack;
+ aExpBigger:
+    if ( aExp == 0xFF ) {
+        if ( aSig ) return propagateFloat32NaN( a, b );
+        return a;
+    }
+    if ( bExp == 0 ) {
+        --expDiff;
+    }
+    else {
+        bSig |= 0x40000000;
+    }
+    shift32RightJamming( bSig, expDiff, &bSig );
+    aSig |= 0x40000000;
+ aBigger:
+    zSig = aSig - bSig;
+    zExp = aExp;
+ normalizeRoundAndPack:
+    --zExp;
+    return normalizeRoundAndPackFloat32( roundData, zSign, zExp, zSig );
+
+}
+
+/*
+-------------------------------------------------------------------------------
+Returns the result of adding the single-precision floating-point values `a'
+and `b'.  The operation is performed according to the IEC/IEEE Standard for
+Binary Floating-point Arithmetic.
+-------------------------------------------------------------------------------
+*/
+float32 float32_add( struct roundingData *roundData, float32 a, float32 b )
+{
+    flag aSign, bSign;
+
+    aSign = extractFloat32Sign( a );
+    bSign = extractFloat32Sign( b );
+    if ( aSign == bSign ) {
+        return addFloat32Sigs( roundData, a, b, aSign );
+    }
+    else {
+        return subFloat32Sigs( roundData, a, b, aSign );
+    }
+
+}
+
+/*
+-------------------------------------------------------------------------------
+Returns the result of subtracting the single-precision floating-point values
+`a' and `b'.  The operation is performed according to the IEC/IEEE Standard
+for Binary Floating-point Arithmetic.
+-------------------------------------------------------------------------------
+*/
+float32 float32_sub( struct roundingData *roundData, float32 a, float32 b )
+{
+    flag aSign, bSign;
+
+    aSign = extractFloat32Sign( a );
+    bSign = extractFloat32Sign( b );
+    if ( aSign == bSign ) {
+        return subFloat32Sigs( roundData, a, b, aSign );
+    }
+    else {
+        return addFloat32Sigs( roundData, a, b, aSign );
+    }
+
+}
+
+/*
+-------------------------------------------------------------------------------
+Returns the result of multiplying the single-precision floating-point values
+`a' and `b'.  The operation is performed according to the IEC/IEEE Standard
+for Binary Floating-point Arithmetic.
+-------------------------------------------------------------------------------
+*/
+float32 float32_mul( struct roundingData *roundData, float32 a, float32 b )
+{
+    flag aSign, bSign, zSign;
+    int16 aExp, bExp, zExp;
+    bits32 aSig, bSig;
+    bits64 zSig64;
+    bits32 zSig;
+
+    aSig = extractFloat32Frac( a );
+    aExp = extractFloat32Exp( a );
+    aSign = extractFloat32Sign( a );
+    bSig = extractFloat32Frac( b );
+    bExp = extractFloat32Exp( b );
+    bSign = extractFloat32Sign( b );
+    zSign = aSign ^ bSign;
+    if ( aExp == 0xFF ) {
+        if ( aSig || ( ( bExp == 0xFF ) && bSig ) ) {
+            return propagateFloat32NaN( a, b );
+        }
+        if ( ( bExp | bSig ) == 0 ) {
+            roundData->exception |= float_flag_invalid;
+            return float32_default_nan;
+        }
+        return packFloat32( zSign, 0xFF, 0 );
+    }
+    if ( bExp == 0xFF ) {
+        if ( bSig ) return propagateFloat32NaN( a, b );
+        if ( ( aExp | aSig ) == 0 ) {
+            roundData->exception |= float_flag_invalid;
+            return float32_default_nan;
+        }
+        return packFloat32( zSign, 0xFF, 0 );
+    }
+    if ( aExp == 0 ) {
+        if ( aSig == 0 ) return packFloat32( zSign, 0, 0 );
+        normalizeFloat32Subnormal( aSig, &aExp, &aSig );
+    }
+    if ( bExp == 0 ) {
+        if ( bSig == 0 ) return packFloat32( zSign, 0, 0 );
+        normalizeFloat32Subnormal( bSig, &bExp, &bSig );
+    }
+    zExp = aExp + bExp - 0x7F;
+    aSig = ( aSig | 0x00800000 )<<7;
+    bSig = ( bSig | 0x00800000 )<<8;
+    shift64RightJamming( ( (bits64) aSig ) * bSig, 32, &zSig64 );
+    zSig = zSig64;
+    if ( 0 <= (sbits32) ( zSig<<1 ) ) {
+        zSig <<= 1;
+        --zExp;
+    }
+    return roundAndPackFloat32( roundData, zSign, zExp, zSig );
+
+}
+
+/*
+-------------------------------------------------------------------------------
+Returns the result of dividing the single-precision floating-point value `a'
+by the corresponding value `b'.  The operation is performed according to the
+IEC/IEEE Standard for Binary Floating-point Arithmetic.
+-------------------------------------------------------------------------------
+*/
+float32 float32_div( struct roundingData *roundData, float32 a, float32 b )
+{
+    flag aSign, bSign, zSign;
+    int16 aExp, bExp, zExp;
+    bits32 aSig, bSig, zSig;
+
+    aSig = extractFloat32Frac( a );
+    aExp = extractFloat32Exp( a );
+    aSign = extractFloat32Sign( a );
+    bSig = extractFloat32Frac( b );
+    bExp = extractFloat32Exp( b );
+    bSign = extractFloat32Sign( b );
+    zSign = aSign ^ bSign;
+    if ( aExp == 0xFF ) {
+        if ( aSig ) return propagateFloat32NaN( a, b );
+        if ( bExp == 0xFF ) {
+            if ( bSig ) return propagateFloat32NaN( a, b );
+            roundData->exception |= float_flag_invalid;
+            return float32_default_nan;
+        }
+        return packFloat32( zSign, 0xFF, 0 );
+    }
+    if ( bExp == 0xFF ) {
+        if ( bSig ) return propagateFloat32NaN( a, b );
+        return packFloat32( zSign, 0, 0 );
+    }
+    if ( bExp == 0 ) {
+        if ( bSig == 0 ) {
+            if ( ( aExp | aSig ) == 0 ) {
+                roundData->exception |= float_flag_invalid;
+                return float32_default_nan;
+            }
+            roundData->exception |= float_flag_divbyzero;
+            return packFloat32( zSign, 0xFF, 0 );
+        }
+        normalizeFloat32Subnormal( bSig, &bExp, &bSig );
+    }
+    if ( aExp == 0 ) {
+        if ( aSig == 0 ) return packFloat32( zSign, 0, 0 );
+        normalizeFloat32Subnormal( aSig, &aExp, &aSig );
+    }
+    zExp = aExp - bExp + 0x7D;
+    aSig = ( aSig | 0x00800000 )<<7;
+    bSig = ( bSig | 0x00800000 )<<8;
+    if ( bSig <= ( aSig + aSig ) ) {
+        aSig >>= 1;
+        ++zExp;
+    }
+    {
+        bits64 tmp = ( (bits64) aSig )<<32;
+        do_div( tmp, bSig );
+        zSig = tmp;
+    }
+    if ( ( zSig & 0x3F ) == 0 ) {
+        zSig |= ( ( (bits64) bSig ) * zSig != ( (bits64) aSig )<<32 );
+    }
+    return roundAndPackFloat32( roundData, zSign, zExp, zSig );
+
+}
+
+/*
+-------------------------------------------------------------------------------
+Returns the remainder of the single-precision floating-point value `a'
+with respect to the corresponding value `b'.  The operation is performed
+according to the IEC/IEEE Standard for Binary Floating-point Arithmetic.
+-------------------------------------------------------------------------------
+*/
+float32 float32_rem( struct roundingData *roundData, float32 a, float32 b )
+{
+    flag aSign, bSign, zSign;
+    int16 aExp, bExp, expDiff;
+    bits32 aSig, bSig;
+    bits32 q;
+    bits64 aSig64, bSig64, q64;
+    bits32 alternateASig;
+    sbits32 sigMean;
+
+    aSig = extractFloat32Frac( a );
+    aExp = extractFloat32Exp( a );
+    aSign = extractFloat32Sign( a );
+    bSig = extractFloat32Frac( b );
+    bExp = extractFloat32Exp( b );
+    bSign = extractFloat32Sign( b );
+    if ( aExp == 0xFF ) {
+        if ( aSig || ( ( bExp == 0xFF ) && bSig ) ) {
+            return propagateFloat32NaN( a, b );
+        }
+        roundData->exception |= float_flag_invalid;
+        return float32_default_nan;
+    }
+    if ( bExp == 0xFF ) {
+        if ( bSig ) return propagateFloat32NaN( a, b );
+        return a;
+    }
+    if ( bExp == 0 ) {
+        if ( bSig == 0 ) {
+            roundData->exception |= float_flag_invalid;
+            return float32_default_nan;
+        }
+        normalizeFloat32Subnormal( bSig, &bExp, &bSig );
+    }
+    if ( aExp == 0 ) {
+        if ( aSig == 0 ) return a;
+        normalizeFloat32Subnormal( aSig, &aExp, &aSig );
+    }
+    expDiff = aExp - bExp;
+    aSig |= 0x00800000;
+    bSig |= 0x00800000;
+    if ( expDiff < 32 ) {
+        aSig <<= 8;
+        bSig <<= 8;
+        if ( expDiff < 0 ) {
+            if ( expDiff < -1 ) return a;
+            aSig >>= 1;
+        }
+        q = ( bSig <= aSig );
+        if ( q ) aSig -= bSig;
+        if ( 0 < expDiff ) {
+            bits64 tmp = ( (bits64) aSig )<<32;
+            do_div( tmp, bSig );
+            q = tmp;
+            q >>= 32 - expDiff;
+            bSig >>= 2;
+            aSig = ( ( aSig>>1 )<<( expDiff - 1 ) ) - bSig * q;
+        }
+        else {
+            aSig >>= 2;
+            bSig >>= 2;
+        }
+    }
+    else {
+        if ( bSig <= aSig ) aSig -= bSig;
+        aSig64 = ( (bits64) aSig )<<40;
+        bSig64 = ( (bits64) bSig )<<40;
+        expDiff -= 64;
+        while ( 0 < expDiff ) {
+            q64 = estimateDiv128To64( aSig64, 0, bSig64 );
+            q64 = ( 2 < q64 ) ? q64 - 2 : 0;
+            aSig64 = - ( ( bSig * q64 )<<38 );
+            expDiff -= 62;
+        }
+        expDiff += 64;
+        q64 = estimateDiv128To64( aSig64, 0, bSig64 );
+        q64 = ( 2 < q64 ) ? q64 - 2 : 0;
+        q = q64>>( 64 - expDiff );
+        bSig <<= 6;
+        aSig = ( ( aSig64>>33 )<<( expDiff - 1 ) ) - bSig * q;
+    }
+    do {
+        alternateASig = aSig;
+        ++q;
+        aSig -= bSig;
+    } while ( 0 <= (sbits32) aSig );
+    sigMean = aSig + alternateASig;
+    if ( ( sigMean < 0 ) || ( ( sigMean == 0 ) && ( q & 1 ) ) ) {
+        aSig = alternateASig;
+    }
+    zSign = ( (sbits32) aSig < 0 );
+    if ( zSign ) aSig = - aSig;
+    return normalizeRoundAndPackFloat32( roundData, aSign ^ zSign, bExp, aSig );
+
+}
+
+/*
+-------------------------------------------------------------------------------
+Returns the square root of the single-precision floating-point value `a'.
+The operation is performed according to the IEC/IEEE Standard for Binary
+Floating-point Arithmetic.
+-------------------------------------------------------------------------------
+*/
+float32 float32_sqrt( struct roundingData *roundData, float32 a )
+{
+    flag aSign;
+    int16 aExp, zExp;
+    bits32 aSig, zSig;
+    bits64 rem, term;
+
+    aSig = extractFloat32Frac( a );
+    aExp = extractFloat32Exp( a );
+    aSign = extractFloat32Sign( a );
+    if ( aExp == 0xFF ) {
+        if ( aSig ) return propagateFloat32NaN( a, 0 );
+        if ( ! aSign ) return a;
+        roundData->exception |= float_flag_invalid;
+        return float32_default_nan;
+    }
+    if ( aSign ) {
+        if ( ( aExp | aSig ) == 0 ) return a;
+        roundData->exception |= float_flag_invalid;
+        return float32_default_nan;
+    }
+    if ( aExp == 0 ) {
+        if ( aSig == 0 ) return 0;
+        normalizeFloat32Subnormal( aSig, &aExp, &aSig );
+    }
+    zExp = ( ( aExp - 0x7F )>>1 ) + 0x7E;
+    aSig = ( aSig | 0x00800000 )<<8;
+    zSig = estimateSqrt32( aExp, aSig ) + 2;
+    if ( ( zSig & 0x7F ) <= 5 ) {
+        if ( zSig < 2 ) {
+            zSig = 0xFFFFFFFF;
+        }
+        else {
+            aSig >>= aExp & 1;
+            term = ( (bits64) zSig ) * zSig;
+            rem = ( ( (bits64) aSig )<<32 ) - term;
+            while ( (sbits64) rem < 0 ) {
+                --zSig;
+                rem += ( ( (bits64) zSig )<<1 ) | 1;
+            }
+            zSig |= ( rem != 0 );
+        }
+    }
+    shift32RightJamming( zSig, 1, &zSig );
+    return roundAndPackFloat32( roundData, 0, zExp, zSig );
+
+}
+
+/*
+-------------------------------------------------------------------------------
+Returns 1 if the single-precision floating-point value `a' is equal to the
+corresponding value `b', and 0 otherwise.  The comparison is performed
+according to the IEC/IEEE Standard for Binary Floating-point Arithmetic.
+-------------------------------------------------------------------------------
+*/
+flag float32_eq( float32 a, float32 b )
+{
+
+    if (    ( ( extractFloat32Exp( a ) == 0xFF ) && extractFloat32Frac( a ) )
+         || ( ( extractFloat32Exp( b ) == 0xFF ) && extractFloat32Frac( b ) )
+       ) {
+        if ( float32_is_signaling_nan( a ) || float32_is_signaling_nan( b ) ) {
+            float_raise( float_flag_invalid );
+        }
+        return 0;
+    }
+    return ( a == b ) || ( (bits32) ( ( a | b )<<1 ) == 0 );
+
+}
+
+/*
+-------------------------------------------------------------------------------
+Returns 1 if the single-precision floating-point value `a' is less than or
+equal to the corresponding value `b', and 0 otherwise.  The comparison is
+performed according to the IEC/IEEE Standard for Binary Floating-point
+Arithmetic.
+-------------------------------------------------------------------------------
+*/
+flag float32_le( float32 a, float32 b )
+{
+    flag aSign, bSign;
+
+    if (    ( ( extractFloat32Exp( a ) == 0xFF ) && extractFloat32Frac( a ) )
+         || ( ( extractFloat32Exp( b ) == 0xFF ) && extractFloat32Frac( b ) )
+       ) {
+        float_raise( float_flag_invalid );
+        return 0;
+    }
+    aSign = extractFloat32Sign( a );
+    bSign = extractFloat32Sign( b );
+    if ( aSign != bSign ) return aSign || ( (bits32) ( ( a | b )<<1 ) == 0 );
+    return ( a == b ) || ( aSign ^ ( a < b ) );
+
+}
+
+/*
+-------------------------------------------------------------------------------
+Returns 1 if the single-precision floating-point value `a' is less than
+the corresponding value `b', and 0 otherwise.  The comparison is performed
+according to the IEC/IEEE Standard for Binary Floating-point Arithmetic.
+-------------------------------------------------------------------------------
+*/
+flag float32_lt( float32 a, float32 b )
+{
+    flag aSign, bSign;
+
+    if (    ( ( extractFloat32Exp( a ) == 0xFF ) && extractFloat32Frac( a ) )
+         || ( ( extractFloat32Exp( b ) == 0xFF ) && extractFloat32Frac( b ) )
+       ) {
+        float_raise( float_flag_invalid );
+        return 0;
+    }
+    aSign = extractFloat32Sign( a );
+    bSign = extractFloat32Sign( b );
+    if ( aSign != bSign ) return aSign && ( (bits32) ( ( a | b )<<1 ) != 0 );
+    return ( a != b ) && ( aSign ^ ( a < b ) );
+
+}
+
+/*
+-------------------------------------------------------------------------------
+Returns 1 if the single-precision floating-point value `a' is equal to the
+corresponding value `b', and 0 otherwise.  The invalid exception is raised
+if either operand is a NaN.  Otherwise, the comparison is performed
+according to the IEC/IEEE Standard for Binary Floating-point Arithmetic.
+-------------------------------------------------------------------------------
+*/
+flag float32_eq_signaling( float32 a, float32 b )
+{
+
+    if (    ( ( extractFloat32Exp( a ) == 0xFF ) && extractFloat32Frac( a ) )
+         || ( ( extractFloat32Exp( b ) == 0xFF ) && extractFloat32Frac( b ) )
+       ) {
+        float_raise( float_flag_invalid );
+        return 0;
+    }
+    return ( a == b ) || ( (bits32) ( ( a | b )<<1 ) == 0 );
+
+}
+
+/*
+-------------------------------------------------------------------------------
+Returns 1 if the single-precision floating-point value `a' is less than or
+equal to the corresponding value `b', and 0 otherwise.  Quiet NaNs do not
+cause an exception.  Otherwise, the comparison is performed according to the
+IEC/IEEE Standard for Binary Floating-point Arithmetic.
+-------------------------------------------------------------------------------
+*/
+flag float32_le_quiet( float32 a, float32 b )
+{
+    flag aSign, bSign;
+    //int16 aExp, bExp;
+
+    if (    ( ( extractFloat32Exp( a ) == 0xFF ) && extractFloat32Frac( a ) )
+         || ( ( extractFloat32Exp( b ) == 0xFF ) && extractFloat32Frac( b ) )
+       ) {
+        /* Do nothing, even if NaN as we're quiet */
+        return 0;
+    }
+    aSign = extractFloat32Sign( a );
+    bSign = extractFloat32Sign( b );
+    if ( aSign != bSign ) return aSign || ( (bits32) ( ( a | b )<<1 ) == 0 );
+    return ( a == b ) || ( aSign ^ ( a < b ) );
+
+}
+
+/*
+-------------------------------------------------------------------------------
+Returns 1 if the single-precision floating-point value `a' is less than
+the corresponding value `b', and 0 otherwise.  Quiet NaNs do not cause an
+exception.  Otherwise, the comparison is performed according to the IEC/IEEE
+Standard for Binary Floating-point Arithmetic.
+-------------------------------------------------------------------------------
+*/
+flag float32_lt_quiet( float32 a, float32 b )
+{
+    flag aSign, bSign;
+
+    if (    ( ( extractFloat32Exp( a ) == 0xFF ) && extractFloat32Frac( a ) )
+         || ( ( extractFloat32Exp( b ) == 0xFF ) && extractFloat32Frac( b ) )
+       ) {
+        /* Do nothing, even if NaN as we're quiet */
+        return 0;
+    }
+    aSign = extractFloat32Sign( a );
+    bSign = extractFloat32Sign( b );
+    if ( aSign != bSign ) return aSign && ( (bits32) ( ( a | b )<<1 ) != 0 );
+    return ( a != b ) && ( aSign ^ ( a < b ) );
+
+}
+
+/*
+-------------------------------------------------------------------------------
+Returns the result of converting the double-precision floating-point value
+`a' to the 32-bit two's complement integer format.  The conversion is
+performed according to the IEC/IEEE Standard for Binary Floating-point
+Arithmetic---which means in particular that the conversion is rounded
+according to the current rounding mode.  If `a' is a NaN, the largest
+positive integer is returned.  Otherwise, if the conversion overflows, the
+largest integer with the same sign as `a' is returned.
+-------------------------------------------------------------------------------
+*/
+int32 float64_to_int32( struct roundingData *roundData, float64 a )
+{
+    flag aSign;
+    int16 aExp, shiftCount;
+    bits64 aSig;
+
+    aSig = extractFloat64Frac( a );
+    aExp = extractFloat64Exp( a );
+    aSign = extractFloat64Sign( a );
+    if ( ( aExp == 0x7FF ) && aSig ) aSign = 0;
+    if ( aExp ) aSig |= LIT64( 0x0010000000000000 );
+    shiftCount = 0x42C - aExp;
+    if ( 0 < shiftCount ) shift64RightJamming( aSig, shiftCount, &aSig );
+    return roundAndPackInt32( roundData, aSign, aSig );
+
+}
+
+/*
+-------------------------------------------------------------------------------
+Returns the result of converting the double-precision floating-point value
+`a' to the 32-bit two's complement integer format.  The conversion is
+performed according to the IEC/IEEE Standard for Binary Floating-point
+Arithmetic, except that the conversion is always rounded toward zero.  If
+`a' is a NaN, the largest positive integer is returned.  Otherwise, if the
+conversion overflows, the largest integer with the same sign as `a' is
+returned.
+-------------------------------------------------------------------------------
+*/
+int32 float64_to_int32_round_to_zero( float64 a )
+{
+    flag aSign;
+    int16 aExp, shiftCount;
+    bits64 aSig, savedASig;
+    int32 z;
+
+    aSig = extractFloat64Frac( a );
+    aExp = extractFloat64Exp( a );
+    aSign = extractFloat64Sign( a );
+    shiftCount = 0x433 - aExp;
+    if ( shiftCount < 21 ) {
+        if ( ( aExp == 0x7FF ) && aSig ) aSign = 0;
+        goto invalid;
+    }
+    else if ( 52 < shiftCount ) {
+        if ( aExp || aSig ) float_raise( float_flag_inexact );
+        return 0;
+    }
+    aSig |= LIT64( 0x0010000000000000 );
+    savedASig = aSig;
+    aSig >>= shiftCount;
+    z = aSig;
+    if ( aSign ) z = - z;
+    if ( ( z < 0 ) ^ aSign ) {
+ invalid:
+        float_raise( float_flag_invalid );
+        return aSign ? 0x80000000 : 0x7FFFFFFF;
+    }
+    if ( ( aSig<<shiftCount ) != savedASig ) {
+        float_raise( float_flag_inexact );
+    }
+    return z;
+
+}
+
+/*
+-------------------------------------------------------------------------------
+Returns the result of converting the double-precision floating-point value
+`a' to the 32-bit two's complement unsigned integer format.  The conversion
+is performed according to the IEC/IEEE Standard for Binary Floating-point
+Arithmetic---which means in particular that the conversion is rounded
+according to the current rounding mode.  If `a' is a NaN, the largest
+positive integer is returned.  Otherwise, if the conversion overflows, the
+largest positive integer is returned.
+-------------------------------------------------------------------------------
+*/
+int32 float64_to_uint32( struct roundingData *roundData, float64 a )
+{
+    flag aSign;
+    int16 aExp, shiftCount;
+    bits64 aSig;
+
+    aSig = extractFloat64Frac( a );
+    aExp = extractFloat64Exp( a );
+    aSign = 0; //extractFloat64Sign( a );
+    //if ( ( aExp == 0x7FF ) && aSig ) aSign = 0;
+    if ( aExp ) aSig |= LIT64( 0x0010000000000000 );
+    shiftCount = 0x42C - aExp;
+    if ( 0 < shiftCount ) shift64RightJamming( aSig, shiftCount, &aSig );
+    return roundAndPackInt32( roundData, aSign, aSig );
+}
+
+/*
+-------------------------------------------------------------------------------
+Returns the result of converting the double-precision floating-point value
+`a' to the 32-bit two's complement integer format.  The conversion is
+performed according to the IEC/IEEE Standard for Binary Floating-point
+Arithmetic, except that the conversion is always rounded toward zero.  If
+`a' is a NaN, the largest positive integer is returned.  Otherwise, if the
+conversion overflows, the largest positive integer is returned.
+-------------------------------------------------------------------------------
+*/
+int32 float64_to_uint32_round_to_zero( float64 a )
+{
+    flag aSign;
+    int16 aExp, shiftCount;
+    bits64 aSig, savedASig;
+    int32 z;
+
+    aSig = extractFloat64Frac( a );
+    aExp = extractFloat64Exp( a );
+    aSign = extractFloat64Sign( a );
+    shiftCount = 0x433 - aExp;
+    if ( shiftCount < 21 ) {
+        if ( ( aExp == 0x7FF ) && aSig ) aSign = 0;
+        goto invalid;
+    }
+    else if ( 52 < shiftCount ) {
+        if ( aExp || aSig ) float_raise( float_flag_inexact );
+        return 0;
+    }
+    aSig |= LIT64( 0x0010000000000000 );
+    savedASig = aSig;
+    aSig >>= shiftCount;
+    z = aSig;
+    if ( aSign ) z = - z;
+    if ( ( z < 0 ) ^ aSign ) {
+ invalid:
+        float_raise( float_flag_invalid );
+        return aSign ? 0x80000000 : 0x7FFFFFFF;
+    }
+    if ( ( aSig<<shiftCount ) != savedASig ) {
+        float_raise( float_flag_inexact );
+    }
+    return z;
+}
+
+/*
+-------------------------------------------------------------------------------
+Returns the result of converting the double-precision floating-point value
+`a' to the single-precision floating-point format.  The conversion is
+performed according to the IEC/IEEE Standard for Binary Floating-point
+Arithmetic.
+-------------------------------------------------------------------------------
+*/
+float32 float64_to_float32( struct roundingData *roundData, float64 a )
+{
+    flag aSign;
+    int16 aExp;
+    bits64 aSig;
+    bits32 zSig;
+
+    aSig = extractFloat64Frac( a );
+    aExp = extractFloat64Exp( a );
+    aSign = extractFloat64Sign( a );
+    if ( aExp == 0x7FF ) {
+        if ( aSig ) return commonNaNToFloat32( float64ToCommonNaN( a ) );
+        return packFloat32( aSign, 0xFF, 0 );
+    }
+    shift64RightJamming( aSig, 22, &aSig );
+    zSig = aSig;
+    if ( aExp || zSig ) {
+        zSig |= 0x40000000;
+        aExp -= 0x381;
+    }
+    return roundAndPackFloat32( roundData, aSign, aExp, zSig );
+
+}
+
+#ifdef FLOATX80
+
+/*
+-------------------------------------------------------------------------------
+Returns the result of converting the double-precision floating-point value
+`a' to the extended double-precision floating-point format.  The conversion
+is performed according to the IEC/IEEE Standard for Binary Floating-point
+Arithmetic.
+-------------------------------------------------------------------------------
+*/
+floatx80 float64_to_floatx80( float64 a )
+{
+    flag aSign;
+    int16 aExp;
+    bits64 aSig;
+
+    aSig = extractFloat64Frac( a );
+    aExp = extractFloat64Exp( a );
+    aSign = extractFloat64Sign( a );
+    if ( aExp == 0x7FF ) {
+        if ( aSig ) return commonNaNToFloatx80( float64ToCommonNaN( a ) );
+        return packFloatx80( aSign, 0x7FFF, LIT64( 0x8000000000000000 ) );
+    }
+    if ( aExp == 0 ) {
+        if ( aSig == 0 ) return packFloatx80( aSign, 0, 0 );
+        normalizeFloat64Subnormal( aSig, &aExp, &aSig );
+    }
+    return
+        packFloatx80(
+            aSign, aExp + 0x3C00, ( aSig | LIT64( 0x0010000000000000 ) )<<11 );
+
+}
+
+#endif
+
+/*
+-------------------------------------------------------------------------------
+Rounds the double-precision floating-point value `a' to an integer, and
+returns the result as a double-precision floating-point value.  The
+operation is performed according to the IEC/IEEE Standard for Binary
+Floating-point Arithmetic.
+-------------------------------------------------------------------------------
+*/
+float64 float64_round_to_int( struct roundingData *roundData, float64 a )
+{
+    flag aSign;
+    int16 aExp;
+    bits64 lastBitMask, roundBitsMask;
+    int8 roundingMode;
+    float64 z;
+
+    aExp = extractFloat64Exp( a );
+    if ( 0x433 <= aExp ) {
+        if ( ( aExp == 0x7FF ) && extractFloat64Frac( a ) ) {
+            return propagateFloat64NaN( a, a );
+        }
+        return a;
+    }
+    if ( aExp <= 0x3FE ) {
+        if ( (bits64) ( a<<1 ) == 0 ) return a;
+        roundData->exception |= float_flag_inexact;
+        aSign = extractFloat64Sign( a );
+        switch ( roundData->mode ) {
+         case float_round_nearest_even:
+            if ( ( aExp == 0x3FE ) && extractFloat64Frac( a ) ) {
+                return packFloat64( aSign, 0x3FF, 0 );
+            }
+            break;
+         case float_round_down:
+            return aSign ? LIT64( 0xBFF0000000000000 ) : 0;
+         case float_round_up:
+            return
+            aSign ? LIT64( 0x8000000000000000 ) : LIT64( 0x3FF0000000000000 );
+        }
+        return packFloat64( aSign, 0, 0 );
+    }
+    lastBitMask = 1;
+    lastBitMask <<= 0x433 - aExp;
+    roundBitsMask = lastBitMask - 1;
+    z = a;
+    roundingMode = roundData->mode;
+    if ( roundingMode == float_round_nearest_even ) {
+        z += lastBitMask>>1;
+        if ( ( z & roundBitsMask ) == 0 ) z &= ~ lastBitMask;
+    }
+    else if ( roundingMode != float_round_to_zero ) {
+        if ( extractFloat64Sign( z ) ^ ( roundingMode == float_round_up ) ) {
+            z += roundBitsMask;
+        }
+    }
+    z &= ~ roundBitsMask;
+    if ( z != a ) roundData->exception |= float_flag_inexact;
+    return z;
+
+}
+
+/*
+-------------------------------------------------------------------------------
+Returns the result of adding the absolute values of the double-precision
+floating-point values `a' and `b'.  If `zSign' is true, the sum is negated
+before being returned.  `zSign' is ignored if the result is a NaN.  The
+addition is performed according to the IEC/IEEE Standard for Binary
+Floating-point Arithmetic.
+-------------------------------------------------------------------------------
+*/
+static float64 addFloat64Sigs( struct roundingData *roundData, float64 a, float64 b, flag zSign )
+{
+    int16 aExp, bExp, zExp;
+    bits64 aSig, bSig, zSig;
+    int16 expDiff;
+
+    aSig = extractFloat64Frac( a );
+    aExp = extractFloat64Exp( a );
+    bSig = extractFloat64Frac( b );
+    bExp = extractFloat64Exp( b );
+    expDiff = aExp - bExp;
+    aSig <<= 9;
+    bSig <<= 9;
+    if ( 0 < expDiff ) {
+        if ( aExp == 0x7FF ) {
+            if ( aSig ) return propagateFloat64NaN( a, b );
+            return a;
+        }
+        if ( bExp == 0 ) {
+            --expDiff;
+        }
+        else {
+            bSig |= LIT64( 0x2000000000000000 );
+        }
+        shift64RightJamming( bSig, expDiff, &bSig );
+        zExp = aExp;
+    }
+    else if ( expDiff < 0 ) {
+        if ( bExp == 0x7FF ) {
+            if ( bSig ) return propagateFloat64NaN( a, b );
+            return packFloat64( zSign, 0x7FF, 0 );
+        }
+        if ( aExp == 0 ) {
+            ++expDiff;
+        }
+        else {
+            aSig |= LIT64( 0x2000000000000000 );
+        }
+        shift64RightJamming( aSig, - expDiff, &aSig );
+        zExp = bExp;
+    }
+    else {
+        if ( aExp == 0x7FF ) {
+            if ( aSig | bSig ) return propagateFloat64NaN( a, b );
+            return a;
+        }
+        if ( aExp == 0 ) return packFloat64( zSign, 0, ( aSig + bSig )>>9 );
+        zSig = LIT64( 0x4000000000000000 ) + aSig + bSig;
+        zExp = aExp;
+        goto roundAndPack;
+    }
+    aSig |= LIT64( 0x2000000000000000 );
+    zSig = ( aSig + bSig )<<1;
+    --zExp;
+    if ( (sbits64) zSig < 0 ) {
+        zSig = aSig + bSig;
+        ++zExp;
+    }
+ roundAndPack:
+    return roundAndPackFloat64( roundData, zSign, zExp, zSig );
+
+}
+
+/*
+-------------------------------------------------------------------------------
+Returns the result of subtracting the absolute values of the double-
+precision floating-point values `a' and `b'.  If `zSign' is true, the
+difference is negated before being returned.  `zSign' is ignored if the
+result is a NaN.  The subtraction is performed according to the IEC/IEEE
+Standard for Binary Floating-point Arithmetic.
+-------------------------------------------------------------------------------
+*/
+static float64 subFloat64Sigs( struct roundingData *roundData, float64 a, float64 b, flag zSign )
+{
+    int16 aExp, bExp, zExp;
+    bits64 aSig, bSig, zSig;
+    int16 expDiff;
+
+    aSig = extractFloat64Frac( a );
+    aExp = extractFloat64Exp( a );
+    bSig = extractFloat64Frac( b );
+    bExp = extractFloat64Exp( b );
+    expDiff = aExp - bExp;
+    aSig <<= 10;
+    bSig <<= 10;
+    if ( 0 < expDiff ) goto aExpBigger;
+    if ( expDiff < 0 ) goto bExpBigger;
+    if ( aExp == 0x7FF ) {
+        if ( aSig | bSig ) return propagateFloat64NaN( a, b );
+        roundData->exception |= float_flag_invalid;
+        return float64_default_nan;
+    }
+    if ( aExp == 0 ) {
+        aExp = 1;
+        bExp = 1;
+    }
+    if ( bSig < aSig ) goto aBigger;
+    if ( aSig < bSig ) goto bBigger;
+    return packFloat64( roundData->mode == float_round_down, 0, 0 );
+ bExpBigger:
+    if ( bExp == 0x7FF ) {
+        if ( bSig ) return propagateFloat64NaN( a, b );
+        return packFloat64( zSign ^ 1, 0x7FF, 0 );
+    }
+    if ( aExp == 0 ) {
+        ++expDiff;
+    }
+    else {
+        aSig |= LIT64( 0x4000000000000000 );
+    }
+    shift64RightJamming( aSig, - expDiff, &aSig );
+    bSig |= LIT64( 0x4000000000000000 );
+ bBigger:
+    zSig = bSig - aSig;
+    zExp = bExp;
+    zSign ^= 1;
+    goto normalizeRoundAndPack;
+ aExpBigger:
+    if ( aExp == 0x7FF ) {
+        if ( aSig ) return propagateFloat64NaN( a, b );
+        return a;
+    }
+    if ( bExp == 0 ) {
+        --expDiff;
+    }
+    else {
+        bSig |= LIT64( 0x4000000000000000 );
+    }
+    shift64RightJamming( bSig, expDiff, &bSig );
+    aSig |= LIT64( 0x4000000000000000 );
+ aBigger:
+    zSig = aSig - bSig;
+    zExp = aExp;
+ normalizeRoundAndPack:
+    --zExp;
+    return normalizeRoundAndPackFloat64( roundData, zSign, zExp, zSig );
+
+}
+
+/*
+-------------------------------------------------------------------------------
+Returns the result of adding the double-precision floating-point values `a'
+and `b'.  The operation is performed according to the IEC/IEEE Standard for
+Binary Floating-point Arithmetic.
+-------------------------------------------------------------------------------
+*/
+float64 float64_add( struct roundingData *roundData, float64 a, float64 b )
+{
+    flag aSign, bSign;
+
+    aSign = extractFloat64Sign( a );
+    bSign = extractFloat64Sign( b );
+    if ( aSign == bSign ) {
+        return addFloat64Sigs( roundData, a, b, aSign );
+    }
+    else {
+        return subFloat64Sigs( roundData, a, b, aSign );
+    }
+
+}
+
+/*
+-------------------------------------------------------------------------------
+Returns the result of subtracting the double-precision floating-point values
+`a' and `b'.  The operation is performed according to the IEC/IEEE Standard
+for Binary Floating-point Arithmetic.
+-------------------------------------------------------------------------------
+*/
+float64 float64_sub( struct roundingData *roundData, float64 a, float64 b )
+{
+    flag aSign, bSign;
+
+    aSign = extractFloat64Sign( a );
+    bSign = extractFloat64Sign( b );
+    if ( aSign == bSign ) {
+        return subFloat64Sigs( roundData, a, b, aSign );
+    }
+    else {
+        return addFloat64Sigs( roundData, a, b, aSign );
+    }
+
+}
+
+/*
+-------------------------------------------------------------------------------
+Returns the result of multiplying the double-precision floating-point values
+`a' and `b'.  The operation is performed according to the IEC/IEEE Standard
+for Binary Floating-point Arithmetic.
+-------------------------------------------------------------------------------
+*/
+float64 float64_mul( struct roundingData *roundData, float64 a, float64 b )
+{
+    flag aSign, bSign, zSign;
+    int16 aExp, bExp, zExp;
+    bits64 aSig, bSig, zSig0, zSig1;
+
+    aSig = extractFloat64Frac( a );
+    aExp = extractFloat64Exp( a );
+    aSign = extractFloat64Sign( a );
+    bSig = extractFloat64Frac( b );
+    bExp = extractFloat64Exp( b );
+    bSign = extractFloat64Sign( b );
+    zSign = aSign ^ bSign;
+    if ( aExp == 0x7FF ) {
+        if ( aSig || ( ( bExp == 0x7FF ) && bSig ) ) {
+            return propagateFloat64NaN( a, b );
+        }
+        if ( ( bExp | bSig ) == 0 ) {
+            roundData->exception |= float_flag_invalid;
+            return float64_default_nan;
+        }
+        return packFloat64( zSign, 0x7FF, 0 );
+    }
+    if ( bExp == 0x7FF ) {
+        if ( bSig ) return propagateFloat64NaN( a, b );
+        if ( ( aExp | aSig ) == 0 ) {
+            roundData->exception |= float_flag_invalid;
+            return float64_default_nan;
+        }
+        return packFloat64( zSign, 0x7FF, 0 );
+    }
+    if ( aExp == 0 ) {
+        if ( aSig == 0 ) return packFloat64( zSign, 0, 0 );
+        normalizeFloat64Subnormal( aSig, &aExp, &aSig );
+    }
+    if ( bExp == 0 ) {
+        if ( bSig == 0 ) return packFloat64( zSign, 0, 0 );
+        normalizeFloat64Subnormal( bSig, &bExp, &bSig );
+    }
+    zExp = aExp + bExp - 0x3FF;
+    aSig = ( aSig | LIT64( 0x0010000000000000 ) )<<10;
+    bSig = ( bSig | LIT64( 0x0010000000000000 ) )<<11;
+    mul64To128( aSig, bSig, &zSig0, &zSig1 );
+    zSig0 |= ( zSig1 != 0 );
+    if ( 0 <= (sbits64) ( zSig0<<1 ) ) {
+        zSig0 <<= 1;
+        --zExp;
+    }
+    return roundAndPackFloat64( roundData, zSign, zExp, zSig0 );
+
+}
+
+/*
+-------------------------------------------------------------------------------
+Returns the result of dividing the double-precision floating-point value `a'
+by the corresponding value `b'.  The operation is performed according to
+the IEC/IEEE Standard for Binary Floating-point Arithmetic.
+-------------------------------------------------------------------------------
+*/
+float64 float64_div( struct roundingData *roundData, float64 a, float64 b )
+{
+    flag aSign, bSign, zSign;
+    int16 aExp, bExp, zExp;
+    bits64 aSig, bSig, zSig;
+    bits64 rem0, rem1;
+    bits64 term0, term1;
+
+    aSig = extractFloat64Frac( a );
+    aExp = extractFloat64Exp( a );
+    aSign = extractFloat64Sign( a );
+    bSig = extractFloat64Frac( b );
+    bExp = extractFloat64Exp( b );
+    bSign = extractFloat64Sign( b );
+    zSign = aSign ^ bSign;
+    if ( aExp == 0x7FF ) {
+        if ( aSig ) return propagateFloat64NaN( a, b );
+        if ( bExp == 0x7FF ) {
+            if ( bSig ) return propagateFloat64NaN( a, b );
+            roundData->exception |= float_flag_invalid;
+            return float64_default_nan;
+        }
+        return packFloat64( zSign, 0x7FF, 0 );
+    }
+    if ( bExp == 0x7FF ) {
+        if ( bSig ) return propagateFloat64NaN( a, b );
+        return packFloat64( zSign, 0, 0 );
+    }
+    if ( bExp == 0 ) {
+        if ( bSig == 0 ) {
+            if ( ( aExp | aSig ) == 0 ) {
+                roundData->exception |= float_flag_invalid;
+                return float64_default_nan;
+            }
+            roundData->exception |= float_flag_divbyzero;
+            return packFloat64( zSign, 0x7FF, 0 );
+        }
+        normalizeFloat64Subnormal( bSig, &bExp, &bSig );
+    }
+    if ( aExp == 0 ) {
+        if ( aSig == 0 ) return packFloat64( zSign, 0, 0 );
+        normalizeFloat64Subnormal( aSig, &aExp, &aSig );
+    }
+    zExp = aExp - bExp + 0x3FD;
+    aSig = ( aSig | LIT64( 0x0010000000000000 ) )<<10;
+    bSig = ( bSig | LIT64( 0x0010000000000000 ) )<<11;
+    if ( bSig <= ( aSig + aSig ) ) {
+        aSig >>= 1;
+        ++zExp;
+    }
+    zSig = estimateDiv128To64( aSig, 0, bSig );
+    if ( ( zSig & 0x1FF ) <= 2 ) {
+        mul64To128( bSig, zSig, &term0, &term1 );
+        sub128( aSig, 0, term0, term1, &rem0, &rem1 );
+        while ( (sbits64) rem0 < 0 ) {
+            --zSig;
+            add128( rem0, rem1, 0, bSig, &rem0, &rem1 );
+        }
+        zSig |= ( rem1 != 0 );
+    }
+    return roundAndPackFloat64( roundData, zSign, zExp, zSig );
+
+}
+
+/*
+-------------------------------------------------------------------------------
+Returns the remainder of the double-precision floating-point value `a'
+with respect to the corresponding value `b'.  The operation is performed
+according to the IEC/IEEE Standard for Binary Floating-point Arithmetic.
+-------------------------------------------------------------------------------
+*/
+float64 float64_rem( struct roundingData *roundData, float64 a, float64 b )
+{
+    flag aSign, bSign, zSign;
+    int16 aExp, bExp, expDiff;
+    bits64 aSig, bSig;
+    bits64 q, alternateASig;
+    sbits64 sigMean;
+
+    aSig = extractFloat64Frac( a );
+    aExp = extractFloat64Exp( a );
+    aSign = extractFloat64Sign( a );
+    bSig = extractFloat64Frac( b );
+    bExp = extractFloat64Exp( b );
+    bSign = extractFloat64Sign( b );
+    if ( aExp == 0x7FF ) {
+        if ( aSig || ( ( bExp == 0x7FF ) && bSig ) ) {
+            return propagateFloat64NaN( a, b );
+        }
+        roundData->exception |= float_flag_invalid;
+        return float64_default_nan;
+    }
+    if ( bExp == 0x7FF ) {
+        if ( bSig ) return propagateFloat64NaN( a, b );
+        return a;
+    }
+    if ( bExp == 0 ) {
+        if ( bSig == 0 ) {
+            roundData->exception |= float_flag_invalid;
+            return float64_default_nan;
+        }
+        normalizeFloat64Subnormal( bSig, &bExp, &bSig );
+    }
+    if ( aExp == 0 ) {
+        if ( aSig == 0 ) return a;
+        normalizeFloat64Subnormal( aSig, &aExp, &aSig );
+    }
+    expDiff = aExp - bExp;
+    aSig = ( aSig | LIT64( 0x0010000000000000 ) )<<11;
+    bSig = ( bSig | LIT64( 0x0010000000000000 ) )<<11;
+    if ( expDiff < 0 ) {
+        if ( expDiff < -1 ) return a;
+        aSig >>= 1;
+    }
+    q = ( bSig <= aSig );
+    if ( q ) aSig -= bSig;
+    expDiff -= 64;
+    while ( 0 < expDiff ) {
+        q = estimateDiv128To64( aSig, 0, bSig );
+        q = ( 2 < q ) ? q - 2 : 0;
+        aSig = - ( ( bSig>>2 ) * q );
+        expDiff -= 62;
+    }
+    expDiff += 64;
+    if ( 0 < expDiff ) {
+        q = estimateDiv128To64( aSig, 0, bSig );
+        q = ( 2 < q ) ? q - 2 : 0;
+        q >>= 64 - expDiff;
+        bSig >>= 2;
+        aSig = ( ( aSig>>1 )<<( expDiff - 1 ) ) - bSig * q;
+    }
+    else {
+        aSig >>= 2;
+        bSig >>= 2;
+    }
+    do {
+        alternateASig = aSig;
+        ++q;
+        aSig -= bSig;
+    } while ( 0 <= (sbits64) aSig );
+    sigMean = aSig + alternateASig;
+    if ( ( sigMean < 0 ) || ( ( sigMean == 0 ) && ( q & 1 ) ) ) {
+        aSig = alternateASig;
+    }
+    zSign = ( (sbits64) aSig < 0 );
+    if ( zSign ) aSig = - aSig;
+    return normalizeRoundAndPackFloat64( roundData, aSign ^ zSign, bExp, aSig );
+
+}
+
+/*
+-------------------------------------------------------------------------------
+Returns the square root of the double-precision floating-point value `a'.
+The operation is performed according to the IEC/IEEE Standard for Binary
+Floating-point Arithmetic.
+-------------------------------------------------------------------------------
+*/
+float64 float64_sqrt( struct roundingData *roundData, float64 a )
+{
+    flag aSign;
+    int16 aExp, zExp;
+    bits64 aSig, zSig;
+    bits64 rem0, rem1, term0, term1; //, shiftedRem;
+    //float64 z;
+
+    aSig = extractFloat64Frac( a );
+    aExp = extractFloat64Exp( a );
+    aSign = extractFloat64Sign( a );
+    if ( aExp == 0x7FF ) {
+        if ( aSig ) return propagateFloat64NaN( a, a );
+        if ( ! aSign ) return a;
+        roundData->exception |= float_flag_invalid;
+        return float64_default_nan;
+    }
+    if ( aSign ) {
+        if ( ( aExp | aSig ) == 0 ) return a;
+        roundData->exception |= float_flag_invalid;
+        return float64_default_nan;
+    }
+    if ( aExp == 0 ) {
+        if ( aSig == 0 ) return 0;
+        normalizeFloat64Subnormal( aSig, &aExp, &aSig );
+    }
+    zExp = ( ( aExp - 0x3FF )>>1 ) + 0x3FE;
+    aSig |= LIT64( 0x0010000000000000 );
+    zSig = estimateSqrt32( aExp, aSig>>21 );
+    zSig <<= 31;
+    aSig <<= 9 - ( aExp & 1 );
+    zSig = estimateDiv128To64( aSig, 0, zSig ) + zSig + 2;
+    if ( ( zSig & 0x3FF ) <= 5 ) {
+        if ( zSig < 2 ) {
+            zSig = LIT64( 0xFFFFFFFFFFFFFFFF );
+        }
+        else {
+            aSig <<= 2;
+            mul64To128( zSig, zSig, &term0, &term1 );
+            sub128( aSig, 0, term0, term1, &rem0, &rem1 );
+            while ( (sbits64) rem0 < 0 ) {
+                --zSig;
+                shortShift128Left( 0, zSig, 1, &term0, &term1 );
+                term1 |= 1;
+                add128( rem0, rem1, term0, term1, &rem0, &rem1 );
+            }
+            zSig |= ( ( rem0 | rem1 ) != 0 );
+        }
+    }
+    shift64RightJamming( zSig, 1, &zSig );
+    return roundAndPackFloat64( roundData, 0, zExp, zSig );
+
+}
+
+/*
+-------------------------------------------------------------------------------
+Returns 1 if the double-precision floating-point value `a' is equal to the
+corresponding value `b', and 0 otherwise.  The comparison is performed
+according to the IEC/IEEE Standard for Binary Floating-point Arithmetic.
+-------------------------------------------------------------------------------
+*/
+flag float64_eq( float64 a, float64 b )
+{
+
+    if (    ( ( extractFloat64Exp( a ) == 0x7FF ) && extractFloat64Frac( a ) )
+         || ( ( extractFloat64Exp( b ) == 0x7FF ) && extractFloat64Frac( b ) )
+       ) {
+        if ( float64_is_signaling_nan( a ) || float64_is_signaling_nan( b ) ) {
+            float_raise( float_flag_invalid );
+        }
+        return 0;
+    }
+    return ( a == b ) || ( (bits64) ( ( a | b )<<1 ) == 0 );
+
+}
+
+/*
+-------------------------------------------------------------------------------
+Returns 1 if the double-precision floating-point value `a' is less than or
+equal to the corresponding value `b', and 0 otherwise.  The comparison is
+performed according to the IEC/IEEE Standard for Binary Floating-point
+Arithmetic.
+-------------------------------------------------------------------------------
+*/
+flag float64_le( float64 a, float64 b )
+{
+    flag aSign, bSign;
+
+    if (    ( ( extractFloat64Exp( a ) == 0x7FF ) && extractFloat64Frac( a ) )
+         || ( ( extractFloat64Exp( b ) == 0x7FF ) && extractFloat64Frac( b ) )
+       ) {
+        float_raise( float_flag_invalid );
+        return 0;
+    }
+    aSign = extractFloat64Sign( a );
+    bSign = extractFloat64Sign( b );
+    if ( aSign != bSign ) return aSign || ( (bits64) ( ( a | b )<<1 ) == 0 );
+    return ( a == b ) || ( aSign ^ ( a < b ) );
+
+}
+
+/*
+-------------------------------------------------------------------------------
+Returns 1 if the double-precision floating-point value `a' is less than
+the corresponding value `b', and 0 otherwise.  The comparison is performed
+according to the IEC/IEEE Standard for Binary Floating-point Arithmetic.
+-------------------------------------------------------------------------------
+*/
+flag float64_lt( float64 a, float64 b )
+{
+    flag aSign, bSign;
+
+    if (    ( ( extractFloat64Exp( a ) == 0x7FF ) && extractFloat64Frac( a ) )
+         || ( ( extractFloat64Exp( b ) == 0x7FF ) && extractFloat64Frac( b ) )
+       ) {
+        float_raise( float_flag_invalid );
+        return 0;
+    }
+    aSign = extractFloat64Sign( a );
+    bSign = extractFloat64Sign( b );
+    if ( aSign != bSign ) return aSign && ( (bits64) ( ( a | b )<<1 ) != 0 );
+    return ( a != b ) && ( aSign ^ ( a < b ) );
+
+}
+
+/*
+-------------------------------------------------------------------------------
+Returns 1 if the double-precision floating-point value `a' is equal to the
+corresponding value `b', and 0 otherwise.  The invalid exception is raised
+if either operand is a NaN.  Otherwise, the comparison is performed
+according to the IEC/IEEE Standard for Binary Floating-point Arithmetic.
+-------------------------------------------------------------------------------
+*/
+flag float64_eq_signaling( float64 a, float64 b )
+{
+
+    if (    ( ( extractFloat64Exp( a ) == 0x7FF ) && extractFloat64Frac( a ) )
+         || ( ( extractFloat64Exp( b ) == 0x7FF ) && extractFloat64Frac( b ) )
+       ) {
+        float_raise( float_flag_invalid );
+        return 0;
+    }
+    return ( a == b ) || ( (bits64) ( ( a | b )<<1 ) == 0 );
+
+}
+
+/*
+-------------------------------------------------------------------------------
+Returns 1 if the double-precision floating-point value `a' is less than or
+equal to the corresponding value `b', and 0 otherwise.  Quiet NaNs do not
+cause an exception.  Otherwise, the comparison is performed according to the
+IEC/IEEE Standard for Binary Floating-point Arithmetic.
+-------------------------------------------------------------------------------
+*/
+flag float64_le_quiet( float64 a, float64 b )
+{
+    flag aSign, bSign;
+    //int16 aExp, bExp;
+
+    if (    ( ( extractFloat64Exp( a ) == 0x7FF ) && extractFloat64Frac( a ) )
+         || ( ( extractFloat64Exp( b ) == 0x7FF ) && extractFloat64Frac( b ) )
+       ) {
+        /* Do nothing, even if NaN as we're quiet */
+        return 0;
+    }
+    aSign = extractFloat64Sign( a );
+    bSign = extractFloat64Sign( b );
+    if ( aSign != bSign ) return aSign || ( (bits64) ( ( a | b )<<1 ) == 0 );
+    return ( a == b ) || ( aSign ^ ( a < b ) );
+
+}
+
+/*
+-------------------------------------------------------------------------------
+Returns 1 if the double-precision floating-point value `a' is less than
+the corresponding value `b', and 0 otherwise.  Quiet NaNs do not cause an
+exception.  Otherwise, the comparison is performed according to the IEC/IEEE
+Standard for Binary Floating-point Arithmetic.
+-------------------------------------------------------------------------------
+*/
+flag float64_lt_quiet( float64 a, float64 b )
+{
+    flag aSign, bSign;
+
+    if (    ( ( extractFloat64Exp( a ) == 0x7FF ) && extractFloat64Frac( a ) )
+         || ( ( extractFloat64Exp( b ) == 0x7FF ) && extractFloat64Frac( b ) )
+       ) {
+        /* Do nothing, even if NaN as we're quiet */
+        return 0;
+    }
+    aSign = extractFloat64Sign( a );
+    bSign = extractFloat64Sign( b );
+    if ( aSign != bSign ) return aSign && ( (bits64) ( ( a | b )<<1 ) != 0 );
+    return ( a != b ) && ( aSign ^ ( a < b ) );
+
+}
+
+#ifdef FLOATX80
+
+/*
+-------------------------------------------------------------------------------
+Returns the result of converting the extended double-precision floating-
+point value `a' to the 32-bit two's complement integer format.  The
+conversion is performed according to the IEC/IEEE Standard for Binary
+Floating-point Arithmetic---which means in particular that the conversion
+is rounded according to the current rounding mode.  If `a' is a NaN, the
+largest positive integer is returned.  Otherwise, if the conversion
+overflows, the largest integer with the same sign as `a' is returned.
+-------------------------------------------------------------------------------
+*/
+int32 floatx80_to_int32( struct roundingData *roundData, floatx80 a )
+{
+    flag aSign;
+    int32 aExp, shiftCount;
+    bits64 aSig;
+
+    aSig = extractFloatx80Frac( a );
+    aExp = extractFloatx80Exp( a );
+    aSign = extractFloatx80Sign( a );
+    if ( ( aExp == 0x7FFF ) && (bits64) ( aSig<<1 ) ) aSign = 0;
+    shiftCount = 0x4037 - aExp;
+    if ( shiftCount <= 0 ) shiftCount = 1;
+    shift64RightJamming( aSig, shiftCount, &aSig );
+    return roundAndPackInt32( roundData, aSign, aSig );
+
+}
+
+/*
+-------------------------------------------------------------------------------
+Returns the result of converting the extended double-precision floating-
+point value `a' to the 32-bit two's complement integer format.  The
+conversion is performed according to the IEC/IEEE Standard for Binary
+Floating-point Arithmetic, except that the conversion is always rounded
+toward zero.  If `a' is a NaN, the largest positive integer is returned.
+Otherwise, if the conversion overflows, the largest integer with the same
+sign as `a' is returned.
+-------------------------------------------------------------------------------
+*/
+int32 floatx80_to_int32_round_to_zero( floatx80 a )
+{
+    flag aSign;
+    int32 aExp, shiftCount;
+    bits64 aSig, savedASig;
+    int32 z;
+
+    aSig = extractFloatx80Frac( a );
+    aExp = extractFloatx80Exp( a );
+    aSign = extractFloatx80Sign( a );
+    shiftCount = 0x403E - aExp;
+    if ( shiftCount < 32 ) {
+        if ( ( aExp == 0x7FFF ) && (bits64) ( aSig<<1 ) ) aSign = 0;
+        goto invalid;
+    }
+    else if ( 63 < shiftCount ) {
+        if ( aExp || aSig ) float_raise( float_flag_inexact );
+        return 0;
+    }
+    savedASig = aSig;
+    aSig >>= shiftCount;
+    z = aSig;
+    if ( aSign ) z = - z;
+    if ( ( z < 0 ) ^ aSign ) {
+ invalid:
+        float_raise( float_flag_invalid );
+        return aSign ? 0x80000000 : 0x7FFFFFFF;
+    }
+    if ( ( aSig<<shiftCount ) != savedASig ) {
+        float_raise( float_flag_inexact );
+    }
+    return z;
+
+}
+
+/*
+-------------------------------------------------------------------------------
+Returns the result of converting the extended double-precision floating-
+point value `a' to the single-precision floating-point format.  The
+conversion is performed according to the IEC/IEEE Standard for Binary
+Floating-point Arithmetic.
+-------------------------------------------------------------------------------
+*/
+float32 floatx80_to_float32( struct roundingData *roundData, floatx80 a )
+{
+    flag aSign;
+    int32 aExp;
+    bits64 aSig;
+
+    aSig = extractFloatx80Frac( a );
+    aExp = extractFloatx80Exp( a );
+    aSign = extractFloatx80Sign( a );
+    if ( aExp == 0x7FFF ) {
+        if ( (bits64) ( aSig<<1 ) ) {
+            return commonNaNToFloat32( floatx80ToCommonNaN( a ) );
+        }
+        return packFloat32( aSign, 0xFF, 0 );
+    }
+    shift64RightJamming( aSig, 33, &aSig );
+    if ( aExp || aSig ) aExp -= 0x3F81;
+    return roundAndPackFloat32( roundData, aSign, aExp, aSig );
+
+}
+
+/*
+-------------------------------------------------------------------------------
+Returns the result of converting the extended double-precision floating-
+point value `a' to the double-precision floating-point format.  The
+conversion is performed according to the IEC/IEEE Standard for Binary
+Floating-point Arithmetic.
+-------------------------------------------------------------------------------
+*/
+float64 floatx80_to_float64( struct roundingData *roundData, floatx80 a )
+{
+    flag aSign;
+    int32 aExp;
+    bits64 aSig, zSig;
+
+    aSig = extractFloatx80Frac( a );
+    aExp = extractFloatx80Exp( a );
+    aSign = extractFloatx80Sign( a );
+    if ( aExp == 0x7FFF ) {
+        if ( (bits64) ( aSig<<1 ) ) {
+            return commonNaNToFloat64( floatx80ToCommonNaN( a ) );
+        }
+        return packFloat64( aSign, 0x7FF, 0 );
+    }
+    shift64RightJamming( aSig, 1, &zSig );
+    if ( aExp || aSig ) aExp -= 0x3C01;
+    return roundAndPackFloat64( roundData, aSign, aExp, zSig );
+
+}
+
+/*
+-------------------------------------------------------------------------------
+Rounds the extended double-precision floating-point value `a' to an integer,
+and returns the result as an extended quadruple-precision floating-point
+value.  The operation is performed according to the IEC/IEEE Standard for
+Binary Floating-point Arithmetic.
+-------------------------------------------------------------------------------
+*/
+floatx80 floatx80_round_to_int( struct roundingData *roundData, floatx80 a )
+{
+    flag aSign;
+    int32 aExp;
+    bits64 lastBitMask, roundBitsMask;
+    int8 roundingMode;
+    floatx80 z;
+
+    aExp = extractFloatx80Exp( a );
+    if ( 0x403E <= aExp ) {
+        if ( ( aExp == 0x7FFF ) && (bits64) ( extractFloatx80Frac( a )<<1 ) ) {
+            return propagateFloatx80NaN( a, a );
+        }
+        return a;
+    }
+    if ( aExp <= 0x3FFE ) {
+        if (    ( aExp == 0 )
+             && ( (bits64) ( extractFloatx80Frac( a )<<1 ) == 0 ) ) {
+            return a;
+        }
+        roundData->exception |= float_flag_inexact;
+        aSign = extractFloatx80Sign( a );
+        switch ( roundData->mode ) {
+         case float_round_nearest_even:
+            if ( ( aExp == 0x3FFE ) && (bits64) ( extractFloatx80Frac( a )<<1 )
+               ) {
+                return
+                    packFloatx80( aSign, 0x3FFF, LIT64( 0x8000000000000000 ) );
+            }
+            break;
+         case float_round_down:
+            return
+                  aSign ?
+                      packFloatx80( 1, 0x3FFF, LIT64( 0x8000000000000000 ) )
+                : packFloatx80( 0, 0, 0 );
+         case float_round_up:
+            return
+                  aSign ? packFloatx80( 1, 0, 0 )
+                : packFloatx80( 0, 0x3FFF, LIT64( 0x8000000000000000 ) );
+        }
+        return packFloatx80( aSign, 0, 0 );
+    }
+    lastBitMask = 1;
+    lastBitMask <<= 0x403E - aExp;
+    roundBitsMask = lastBitMask - 1;
+    z = a;
+    roundingMode = roundData->mode;
+    if ( roundingMode == float_round_nearest_even ) {
+        z.low += lastBitMask>>1;
+        if ( ( z.low & roundBitsMask ) == 0 ) z.low &= ~ lastBitMask;
+    }
+    else if ( roundingMode != float_round_to_zero ) {
+        if ( extractFloatx80Sign( z ) ^ ( roundingMode == float_round_up ) ) {
+            z.low += roundBitsMask;
+        }
+    }
+    z.low &= ~ roundBitsMask;
+    if ( z.low == 0 ) {
+        ++z.high;
+        z.low = LIT64( 0x8000000000000000 );
+    }
+    if ( z.low != a.low ) roundData->exception |= float_flag_inexact;
+    return z;
+
+}
+
+/*
+-------------------------------------------------------------------------------
+Returns the result of adding the absolute values of the extended double-
+precision floating-point values `a' and `b'.  If `zSign' is true, the sum is
+negated before being returned.  `zSign' is ignored if the result is a NaN.
+The addition is performed according to the IEC/IEEE Standard for Binary
+Floating-point Arithmetic.
+-------------------------------------------------------------------------------
+*/
+static floatx80 addFloatx80Sigs( struct roundingData *roundData, floatx80 a, floatx80 b, flag zSign )
+{
+    int32 aExp, bExp, zExp;
+    bits64 aSig, bSig, zSig0, zSig1;
+    int32 expDiff;
+
+    aSig = extractFloatx80Frac( a );
+    aExp = extractFloatx80Exp( a );
+    bSig = extractFloatx80Frac( b );
+    bExp = extractFloatx80Exp( b );
+    expDiff = aExp - bExp;
+    if ( 0 < expDiff ) {
+        if ( aExp == 0x7FFF ) {
+            if ( (bits64) ( aSig<<1 ) ) return propagateFloatx80NaN( a, b );
+            return a;
+        }
+        if ( bExp == 0 ) --expDiff;
+        shift64ExtraRightJamming( bSig, 0, expDiff, &bSig, &zSig1 );
+        zExp = aExp;
+    }
+    else if ( expDiff < 0 ) {
+        if ( bExp == 0x7FFF ) {
+            if ( (bits64) ( bSig<<1 ) ) return propagateFloatx80NaN( a, b );
+            return packFloatx80( zSign, 0x7FFF, LIT64( 0x8000000000000000 ) );
+        }
+        if ( aExp == 0 ) ++expDiff;
+        shift64ExtraRightJamming( aSig, 0, - expDiff, &aSig, &zSig1 );
+        zExp = bExp;
+    }
+    else {
+        if ( aExp == 0x7FFF ) {
+            if ( (bits64) ( ( aSig | bSig )<<1 ) ) {
+                return propagateFloatx80NaN( a, b );
+            }
+            return a;
+        }
+        zSig1 = 0;
+        zSig0 = aSig + bSig;
+        if ( aExp == 0 ) {
+            normalizeFloatx80Subnormal( zSig0, &zExp, &zSig0 );
+            goto roundAndPack;
+        }
+        zExp = aExp;
+        goto shiftRight1;
+    }
+    
+    zSig0 = aSig + bSig;
+
+    if ( (sbits64) zSig0 < 0 ) goto roundAndPack; 
+ shiftRight1:
+    shift64ExtraRightJamming( zSig0, zSig1, 1, &zSig0, &zSig1 );
+    zSig0 |= LIT64( 0x8000000000000000 );
+    ++zExp;
+ roundAndPack:
+    return
+        roundAndPackFloatx80(
+            roundData, zSign, zExp, zSig0, zSig1 );
+
+}
+
+/*
+-------------------------------------------------------------------------------
+Returns the result of subtracting the absolute values of the extended
+double-precision floating-point values `a' and `b'.  If `zSign' is true,
+the difference is negated before being returned.  `zSign' is ignored if the
+result is a NaN.  The subtraction is performed according to the IEC/IEEE
+Standard for Binary Floating-point Arithmetic.
+-------------------------------------------------------------------------------
+*/
+static floatx80 subFloatx80Sigs( struct roundingData *roundData, floatx80 a, floatx80 b, flag zSign )
+{
+    int32 aExp, bExp, zExp;
+    bits64 aSig, bSig, zSig0, zSig1;
+    int32 expDiff;
+    floatx80 z;
+
+    aSig = extractFloatx80Frac( a );
+    aExp = extractFloatx80Exp( a );
+    bSig = extractFloatx80Frac( b );
+    bExp = extractFloatx80Exp( b );
+    expDiff = aExp - bExp;
+    if ( 0 < expDiff ) goto aExpBigger;
+    if ( expDiff < 0 ) goto bExpBigger;
+    if ( aExp == 0x7FFF ) {
+        if ( (bits64) ( ( aSig | bSig )<<1 ) ) {
+            return propagateFloatx80NaN( a, b );
+        }
+        roundData->exception |= float_flag_invalid;
+        z.low = floatx80_default_nan_low;
+        z.high = floatx80_default_nan_high;
+        z.__padding = 0;
+        return z;
+    }
+    if ( aExp == 0 ) {
+        aExp = 1;
+        bExp = 1;
+    }
+    zSig1 = 0;
+    if ( bSig < aSig ) goto aBigger;
+    if ( aSig < bSig ) goto bBigger;
+    return packFloatx80( roundData->mode == float_round_down, 0, 0 );
+ bExpBigger:
+    if ( bExp == 0x7FFF ) {
+        if ( (bits64) ( bSig<<1 ) ) return propagateFloatx80NaN( a, b );
+        return packFloatx80( zSign ^ 1, 0x7FFF, LIT64( 0x8000000000000000 ) );
+    }
+    if ( aExp == 0 ) ++expDiff;
+    shift128RightJamming( aSig, 0, - expDiff, &aSig, &zSig1 );
+ bBigger:
+    sub128( bSig, 0, aSig, zSig1, &zSig0, &zSig1 );
+    zExp = bExp;
+    zSign ^= 1;
+    goto normalizeRoundAndPack;
+ aExpBigger:
+    if ( aExp == 0x7FFF ) {
+        if ( (bits64) ( aSig<<1 ) ) return propagateFloatx80NaN( a, b );
+        return a;
+    }
+    if ( bExp == 0 ) --expDiff;
+    shift128RightJamming( bSig, 0, expDiff, &bSig, &zSig1 );
+ aBigger:
+    sub128( aSig, 0, bSig, zSig1, &zSig0, &zSig1 );
+    zExp = aExp;
+ normalizeRoundAndPack:
+    return
+        normalizeRoundAndPackFloatx80(
+            roundData, zSign, zExp, zSig0, zSig1 );
+
+}
+
+/*
+-------------------------------------------------------------------------------
+Returns the result of adding the extended double-precision floating-point
+values `a' and `b'.  The operation is performed according to the IEC/IEEE
+Standard for Binary Floating-point Arithmetic.
+-------------------------------------------------------------------------------
+*/
+floatx80 floatx80_add( struct roundingData *roundData, floatx80 a, floatx80 b )
+{
+    flag aSign, bSign;
+    
+    aSign = extractFloatx80Sign( a );
+    bSign = extractFloatx80Sign( b );
+    if ( aSign == bSign ) {
+        return addFloatx80Sigs( roundData, a, b, aSign );
+    }
+    else {
+        return subFloatx80Sigs( roundData, a, b, aSign );
+    }
+    
+}
+
+/*
+-------------------------------------------------------------------------------
+Returns the result of subtracting the extended double-precision floating-
+point values `a' and `b'.  The operation is performed according to the
+IEC/IEEE Standard for Binary Floating-point Arithmetic.
+-------------------------------------------------------------------------------
+*/
+floatx80 floatx80_sub( struct roundingData *roundData, floatx80 a, floatx80 b )
+{
+    flag aSign, bSign;
+
+    aSign = extractFloatx80Sign( a );
+    bSign = extractFloatx80Sign( b );
+    if ( aSign == bSign ) {
+        return subFloatx80Sigs( roundData, a, b, aSign );
+    }
+    else {
+        return addFloatx80Sigs( roundData, a, b, aSign );
+    }
+
+}
+
+/*
+-------------------------------------------------------------------------------
+Returns the result of multiplying the extended double-precision floating-
+point values `a' and `b'.  The operation is performed according to the
+IEC/IEEE Standard for Binary Floating-point Arithmetic.
+-------------------------------------------------------------------------------
+*/
+floatx80 floatx80_mul( struct roundingData *roundData, floatx80 a, floatx80 b )
+{
+    flag aSign, bSign, zSign;
+    int32 aExp, bExp, zExp;
+    bits64 aSig, bSig, zSig0, zSig1;
+    floatx80 z;
+
+    aSig = extractFloatx80Frac( a );
+    aExp = extractFloatx80Exp( a );
+    aSign = extractFloatx80Sign( a );
+    bSig = extractFloatx80Frac( b );
+    bExp = extractFloatx80Exp( b );
+    bSign = extractFloatx80Sign( b );
+    zSign = aSign ^ bSign;
+    if ( aExp == 0x7FFF ) {
+        if (    (bits64) ( aSig<<1 )
+             || ( ( bExp == 0x7FFF ) && (bits64) ( bSig<<1 ) ) ) {
+            return propagateFloatx80NaN( a, b );
+        }
+        if ( ( bExp | bSig ) == 0 ) goto invalid;
+        return packFloatx80( zSign, 0x7FFF, LIT64( 0x8000000000000000 ) );
+    }
+    if ( bExp == 0x7FFF ) {
+        if ( (bits64) ( bSig<<1 ) ) return propagateFloatx80NaN( a, b );
+        if ( ( aExp | aSig ) == 0 ) {
+ invalid:
+            roundData->exception |= float_flag_invalid;
+            z.low = floatx80_default_nan_low;
+            z.high = floatx80_default_nan_high;
+            z.__padding = 0;
+            return z;
+        }
+        return packFloatx80( zSign, 0x7FFF, LIT64( 0x8000000000000000 ) );
+    }
+    if ( aExp == 0 ) {
+        if ( aSig == 0 ) return packFloatx80( zSign, 0, 0 );
+        normalizeFloatx80Subnormal( aSig, &aExp, &aSig );
+    }
+    if ( bExp == 0 ) {
+        if ( bSig == 0 ) return packFloatx80( zSign, 0, 0 );
+        normalizeFloatx80Subnormal( bSig, &bExp, &bSig );
+    }
+    zExp = aExp + bExp - 0x3FFE;
+    mul64To128( aSig, bSig, &zSig0, &zSig1 );
+    if ( 0 < (sbits64) zSig0 ) {
+        shortShift128Left( zSig0, zSig1, 1, &zSig0, &zSig1 );
+        --zExp;
+    }
+    return
+        roundAndPackFloatx80(
+            roundData, zSign, zExp, zSig0, zSig1 );
+
+}
+
+/*
+-------------------------------------------------------------------------------
+Returns the result of dividing the extended double-precision floating-point
+value `a' by the corresponding value `b'.  The operation is performed
+according to the IEC/IEEE Standard for Binary Floating-point Arithmetic.
+-------------------------------------------------------------------------------
+*/
+floatx80 floatx80_div( struct roundingData *roundData, floatx80 a, floatx80 b )
+{
+    flag aSign, bSign, zSign;
+    int32 aExp, bExp, zExp;
+    bits64 aSig, bSig, zSig0, zSig1;
+    bits64 rem0, rem1, rem2, term0, term1, term2;
+    floatx80 z;
+
+    aSig = extractFloatx80Frac( a );
+    aExp = extractFloatx80Exp( a );
+    aSign = extractFloatx80Sign( a );
+    bSig = extractFloatx80Frac( b );
+    bExp = extractFloatx80Exp( b );
+    bSign = extractFloatx80Sign( b );
+    zSign = aSign ^ bSign;
+    if ( aExp == 0x7FFF ) {
+        if ( (bits64) ( aSig<<1 ) ) return propagateFloatx80NaN( a, b );
+        if ( bExp == 0x7FFF ) {
+            if ( (bits64) ( bSig<<1 ) ) return propagateFloatx80NaN( a, b );
+            goto invalid;
+        }
+        return packFloatx80( zSign, 0x7FFF, LIT64( 0x8000000000000000 ) );
+    }
+    if ( bExp == 0x7FFF ) {
+        if ( (bits64) ( bSig<<1 ) ) return propagateFloatx80NaN( a, b );
+        return packFloatx80( zSign, 0, 0 );
+    }
+    if ( bExp == 0 ) {
+        if ( bSig == 0 ) {
+            if ( ( aExp | aSig ) == 0 ) {
+ invalid:
+                roundData->exception |= float_flag_invalid;
+                z.low = floatx80_default_nan_low;
+                z.high = floatx80_default_nan_high;
+                z.__padding = 0;
+                return z;
+            }
+            roundData->exception |= float_flag_divbyzero;
+            return packFloatx80( zSign, 0x7FFF, LIT64( 0x8000000000000000 ) );
+        }
+        normalizeFloatx80Subnormal( bSig, &bExp, &bSig );
+    }
+    if ( aExp == 0 ) {
+        if ( aSig == 0 ) return packFloatx80( zSign, 0, 0 );
+        normalizeFloatx80Subnormal( aSig, &aExp, &aSig );
+    }
+    zExp = aExp - bExp + 0x3FFE;
+    rem1 = 0;
+    if ( bSig <= aSig ) {
+        shift128Right( aSig, 0, 1, &aSig, &rem1 );
+        ++zExp;
+    }
+    zSig0 = estimateDiv128To64( aSig, rem1, bSig );
+    mul64To128( bSig, zSig0, &term0, &term1 );
+    sub128( aSig, rem1, term0, term1, &rem0, &rem1 );
+    while ( (sbits64) rem0 < 0 ) {
+        --zSig0;
+        add128( rem0, rem1, 0, bSig, &rem0, &rem1 );
+    }
+    zSig1 = estimateDiv128To64( rem1, 0, bSig );
+    if ( (bits64) ( zSig1<<1 ) <= 8 ) {
+        mul64To128( bSig, zSig1, &term1, &term2 );
+        sub128( rem1, 0, term1, term2, &rem1, &rem2 );
+        while ( (sbits64) rem1 < 0 ) {
+            --zSig1;
+            add128( rem1, rem2, 0, bSig, &rem1, &rem2 );
+        }
+        zSig1 |= ( ( rem1 | rem2 ) != 0 );
+    }
+    return
+        roundAndPackFloatx80(
+            roundData, zSign, zExp, zSig0, zSig1 );
+
+}
+
+/*
+-------------------------------------------------------------------------------
+Returns the remainder of the extended double-precision floating-point value
+`a' with respect to the corresponding value `b'.  The operation is performed
+according to the IEC/IEEE Standard for Binary Floating-point Arithmetic.
+-------------------------------------------------------------------------------
+*/
+floatx80 floatx80_rem( struct roundingData *roundData, floatx80 a, floatx80 b )
+{
+    flag aSign, bSign, zSign;
+    int32 aExp, bExp, expDiff;
+    bits64 aSig0, aSig1, bSig;
+    bits64 q, term0, term1, alternateASig0, alternateASig1;
+    floatx80 z;
+
+    aSig0 = extractFloatx80Frac( a );
+    aExp = extractFloatx80Exp( a );
+    aSign = extractFloatx80Sign( a );
+    bSig = extractFloatx80Frac( b );
+    bExp = extractFloatx80Exp( b );
+    bSign = extractFloatx80Sign( b );
+    if ( aExp == 0x7FFF ) {
+        if (    (bits64) ( aSig0<<1 )
+             || ( ( bExp == 0x7FFF ) && (bits64) ( bSig<<1 ) ) ) {
+            return propagateFloatx80NaN( a, b );
+        }
+        goto invalid;
+    }
+    if ( bExp == 0x7FFF ) {
+        if ( (bits64) ( bSig<<1 ) ) return propagateFloatx80NaN( a, b );
+        return a;
+    }
+    if ( bExp == 0 ) {
+        if ( bSig == 0 ) {
+ invalid:
+            roundData->exception |= float_flag_invalid;
+            z.low = floatx80_default_nan_low;
+            z.high = floatx80_default_nan_high;
+            z.__padding = 0;
+            return z;
+        }
+        normalizeFloatx80Subnormal( bSig, &bExp, &bSig );
+    }
+    if ( aExp == 0 ) {
+        if ( (bits64) ( aSig0<<1 ) == 0 ) return a;
+        normalizeFloatx80Subnormal( aSig0, &aExp, &aSig0 );
+    }
+    bSig |= LIT64( 0x8000000000000000 );
+    zSign = aSign;
+    expDiff = aExp - bExp;
+    aSig1 = 0;
+    if ( expDiff < 0 ) {
+        if ( expDiff < -1 ) return a;
+        shift128Right( aSig0, 0, 1, &aSig0, &aSig1 );
+        expDiff = 0;
+    }
+    q = ( bSig <= aSig0 );
+    if ( q ) aSig0 -= bSig;
+    expDiff -= 64;
+    while ( 0 < expDiff ) {
+        q = estimateDiv128To64( aSig0, aSig1, bSig );
+        q = ( 2 < q ) ? q - 2 : 0;
+        mul64To128( bSig, q, &term0, &term1 );
+        sub128( aSig0, aSig1, term0, term1, &aSig0, &aSig1 );
+        shortShift128Left( aSig0, aSig1, 62, &aSig0, &aSig1 );
+        expDiff -= 62;
+    }
+    expDiff += 64;
+    if ( 0 < expDiff ) {
+        q = estimateDiv128To64( aSig0, aSig1, bSig );
+        q = ( 2 < q ) ? q - 2 : 0;
+        q >>= 64 - expDiff;
+        mul64To128( bSig, q<<( 64 - expDiff ), &term0, &term1 );
+        sub128( aSig0, aSig1, term0, term1, &aSig0, &aSig1 );
+        shortShift128Left( 0, bSig, 64 - expDiff, &term0, &term1 );
+        while ( le128( term0, term1, aSig0, aSig1 ) ) {
+            ++q;
+            sub128( aSig0, aSig1, term0, term1, &aSig0, &aSig1 );
+        }
+    }
+    else {
+        term1 = 0;
+        term0 = bSig;
+    }
+    sub128( term0, term1, aSig0, aSig1, &alternateASig0, &alternateASig1 );
+    if (    lt128( alternateASig0, alternateASig1, aSig0, aSig1 )
+         || (    eq128( alternateASig0, alternateASig1, aSig0, aSig1 )
+              && ( q & 1 ) )
+       ) {
+        aSig0 = alternateASig0;
+        aSig1 = alternateASig1;
+        zSign = ! zSign;
+    }
+
+    return
+        normalizeRoundAndPackFloatx80(
+            roundData, zSign, bExp + expDiff, aSig0, aSig1 );
+
+}
+
+/*
+-------------------------------------------------------------------------------
+Returns the square root of the extended double-precision floating-point
+value `a'.  The operation is performed according to the IEC/IEEE Standard
+for Binary Floating-point Arithmetic.
+-------------------------------------------------------------------------------
+*/
+floatx80 floatx80_sqrt( struct roundingData *roundData, floatx80 a )
+{
+    flag aSign;
+    int32 aExp, zExp;
+    bits64 aSig0, aSig1, zSig0, zSig1;
+    bits64 rem0, rem1, rem2, rem3, term0, term1, term2, term3;
+    bits64 shiftedRem0, shiftedRem1;
+    floatx80 z;
+
+    aSig0 = extractFloatx80Frac( a );
+    aExp = extractFloatx80Exp( a );
+    aSign = extractFloatx80Sign( a );
+    if ( aExp == 0x7FFF ) {
+        if ( (bits64) ( aSig0<<1 ) ) return propagateFloatx80NaN( a, a );
+        if ( ! aSign ) return a;
+        goto invalid;
+    }
+    if ( aSign ) {
+        if ( ( aExp | aSig0 ) == 0 ) return a;
+ invalid:
+        roundData->exception |= float_flag_invalid;
+        z.low = floatx80_default_nan_low;
+        z.high = floatx80_default_nan_high;
+        z.__padding = 0;
+        return z;
+    }
+    if ( aExp == 0 ) {
+        if ( aSig0 == 0 ) return packFloatx80( 0, 0, 0 );
+        normalizeFloatx80Subnormal( aSig0, &aExp, &aSig0 );
+    }
+    zExp = ( ( aExp - 0x3FFF )>>1 ) + 0x3FFF;
+    zSig0 = estimateSqrt32( aExp, aSig0>>32 );
+    zSig0 <<= 31;
+    aSig1 = 0;
+    shift128Right( aSig0, 0, ( aExp & 1 ) + 2, &aSig0, &aSig1 );
+    zSig0 = estimateDiv128To64( aSig0, aSig1, zSig0 ) + zSig0 + 4;
+    if ( 0 <= (sbits64) zSig0 ) zSig0 = LIT64( 0xFFFFFFFFFFFFFFFF );
+    shortShift128Left( aSig0, aSig1, 2, &aSig0, &aSig1 );
+    mul64To128( zSig0, zSig0, &term0, &term1 );
+    sub128( aSig0, aSig1, term0, term1, &rem0, &rem1 );
+    while ( (sbits64) rem0 < 0 ) {
+        --zSig0;
+        shortShift128Left( 0, zSig0, 1, &term0, &term1 );
+        term1 |= 1;
+        add128( rem0, rem1, term0, term1, &rem0, &rem1 );
+    }
+    shortShift128Left( rem0, rem1, 63, &shiftedRem0, &shiftedRem1 );
+    zSig1 = estimateDiv128To64( shiftedRem0, shiftedRem1, zSig0 );
+    if ( (bits64) ( zSig1<<1 ) <= 10 ) {
+        if ( zSig1 == 0 ) zSig1 = 1;
+        mul64To128( zSig0, zSig1, &term1, &term2 );
+        shortShift128Left( term1, term2, 1, &term1, &term2 );
+        sub128( rem1, 0, term1, term2, &rem1, &rem2 );
+        mul64To128( zSig1, zSig1, &term2, &term3 );
+        sub192( rem1, rem2, 0, 0, term2, term3, &rem1, &rem2, &rem3 );
+        while ( (sbits64) rem1 < 0 ) {
+            --zSig1;
+            shortShift192Left( 0, zSig0, zSig1, 1, &term1, &term2, &term3 );
+            term3 |= 1;
+            add192(
+                rem1, rem2, rem3, term1, term2, term3, &rem1, &rem2, &rem3 );
+        }
+        zSig1 |= ( ( rem1 | rem2 | rem3 ) != 0 );
+    }
+    return
+        roundAndPackFloatx80(
+            roundData, 0, zExp, zSig0, zSig1 );
+
+}
+
+/*
+-------------------------------------------------------------------------------
+Returns 1 if the extended double-precision floating-point value `a' is
+equal to the corresponding value `b', and 0 otherwise.  The comparison is
+performed according to the IEC/IEEE Standard for Binary Floating-point
+Arithmetic.
+-------------------------------------------------------------------------------
+*/
+flag floatx80_eq( floatx80 a, floatx80 b )
+{
+
+    if (    (    ( extractFloatx80Exp( a ) == 0x7FFF )
+              && (bits64) ( extractFloatx80Frac( a )<<1 ) )
+         || (    ( extractFloatx80Exp( b ) == 0x7FFF )
+              && (bits64) ( extractFloatx80Frac( b )<<1 ) )
+       ) {
+        if (    floatx80_is_signaling_nan( a )
+             || floatx80_is_signaling_nan( b ) ) {
+            float_raise( float_flag_invalid );
+        }
+        return 0;
+    }
+    return
+           ( a.low == b.low )
+        && (    ( a.high == b.high )
+             || (    ( a.low == 0 )
+                  && ( (bits16) ( ( a.high | b.high )<<1 ) == 0 ) )
+           );
+
+}
+
+/*
+-------------------------------------------------------------------------------
+Returns 1 if the extended double-precision floating-point value `a' is
+less than or equal to the corresponding value `b', and 0 otherwise.  The
+comparison is performed according to the IEC/IEEE Standard for Binary
+Floating-point Arithmetic.
+-------------------------------------------------------------------------------
+*/
+flag floatx80_le( floatx80 a, floatx80 b )
+{
+    flag aSign, bSign;
+
+    if (    (    ( extractFloatx80Exp( a ) == 0x7FFF )
+              && (bits64) ( extractFloatx80Frac( a )<<1 ) )
+         || (    ( extractFloatx80Exp( b ) == 0x7FFF )
+              && (bits64) ( extractFloatx80Frac( b )<<1 ) )
+       ) {
+        float_raise( float_flag_invalid );
+        return 0;
+    }
+    aSign = extractFloatx80Sign( a );
+    bSign = extractFloatx80Sign( b );
+    if ( aSign != bSign ) {
+        return
+               aSign
+            || (    ( ( (bits16) ( ( a.high | b.high )<<1 ) ) | a.low | b.low )
+                 == 0 );
+    }
+    return
+          aSign ? le128( b.high, b.low, a.high, a.low )
+        : le128( a.high, a.low, b.high, b.low );
+
+}
+
+/*
+-------------------------------------------------------------------------------
+Returns 1 if the extended double-precision floating-point value `a' is
+less than the corresponding value `b', and 0 otherwise.  The comparison
+is performed according to the IEC/IEEE Standard for Binary Floating-point
+Arithmetic.
+-------------------------------------------------------------------------------
+*/
+flag floatx80_lt( floatx80 a, floatx80 b )
+{
+    flag aSign, bSign;
+
+    if (    (    ( extractFloatx80Exp( a ) == 0x7FFF )
+              && (bits64) ( extractFloatx80Frac( a )<<1 ) )
+         || (    ( extractFloatx80Exp( b ) == 0x7FFF )
+              && (bits64) ( extractFloatx80Frac( b )<<1 ) )
+       ) {
+        float_raise( float_flag_invalid );
+        return 0;
+    }
+    aSign = extractFloatx80Sign( a );
+    bSign = extractFloatx80Sign( b );
+    if ( aSign != bSign ) {
+        return
+               aSign
+            && (    ( ( (bits16) ( ( a.high | b.high )<<1 ) ) | a.low | b.low )
+                 != 0 );
+    }
+    return
+          aSign ? lt128( b.high, b.low, a.high, a.low )
+        : lt128( a.high, a.low, b.high, b.low );
+
+}
+
+/*
+-------------------------------------------------------------------------------
+Returns 1 if the extended double-precision floating-point value `a' is equal
+to the corresponding value `b', and 0 otherwise.  The invalid exception is
+raised if either operand is a NaN.  Otherwise, the comparison is performed
+according to the IEC/IEEE Standard for Binary Floating-point Arithmetic.
+-------------------------------------------------------------------------------
+*/
+flag floatx80_eq_signaling( floatx80 a, floatx80 b )
+{
+
+    if (    (    ( extractFloatx80Exp( a ) == 0x7FFF )
+              && (bits64) ( extractFloatx80Frac( a )<<1 ) )
+         || (    ( extractFloatx80Exp( b ) == 0x7FFF )
+              && (bits64) ( extractFloatx80Frac( b )<<1 ) )
+       ) {
+        float_raise( float_flag_invalid );
+        return 0;
+    }
+    return
+           ( a.low == b.low )
+        && (    ( a.high == b.high )
+             || (    ( a.low == 0 )
+                  && ( (bits16) ( ( a.high | b.high )<<1 ) == 0 ) )
+           );
+
+}
+
+/*
+-------------------------------------------------------------------------------
+Returns 1 if the extended double-precision floating-point value `a' is less
+than or equal to the corresponding value `b', and 0 otherwise.  Quiet NaNs
+do not cause an exception.  Otherwise, the comparison is performed according
+to the IEC/IEEE Standard for Binary Floating-point Arithmetic.
+-------------------------------------------------------------------------------
+*/
+flag floatx80_le_quiet( floatx80 a, floatx80 b )
+{
+    flag aSign, bSign;
+
+    if (    (    ( extractFloatx80Exp( a ) == 0x7FFF )
+              && (bits64) ( extractFloatx80Frac( a )<<1 ) )
+         || (    ( extractFloatx80Exp( b ) == 0x7FFF )
+              && (bits64) ( extractFloatx80Frac( b )<<1 ) )
+       ) {
+        /* Do nothing, even if NaN as we're quiet */
+        return 0;
+    }
+    aSign = extractFloatx80Sign( a );
+    bSign = extractFloatx80Sign( b );
+    if ( aSign != bSign ) {
+        return
+               aSign
+            || (    ( ( (bits16) ( ( a.high | b.high )<<1 ) ) | a.low | b.low )
+                 == 0 );
+    }
+    return
+          aSign ? le128( b.high, b.low, a.high, a.low )
+        : le128( a.high, a.low, b.high, b.low );
+
+}
+
+/*
+-------------------------------------------------------------------------------
+Returns 1 if the extended double-precision floating-point value `a' is less
+than the corresponding value `b', and 0 otherwise.  Quiet NaNs do not cause
+an exception.  Otherwise, the comparison is performed according to the
+IEC/IEEE Standard for Binary Floating-point Arithmetic.
+-------------------------------------------------------------------------------
+*/
+flag floatx80_lt_quiet( floatx80 a, floatx80 b )
+{
+    flag aSign, bSign;
+
+    if (    (    ( extractFloatx80Exp( a ) == 0x7FFF )
+              && (bits64) ( extractFloatx80Frac( a )<<1 ) )
+         || (    ( extractFloatx80Exp( b ) == 0x7FFF )
+              && (bits64) ( extractFloatx80Frac( b )<<1 ) )
+       ) {
+        /* Do nothing, even if NaN as we're quiet */
+        return 0;
+    }
+    aSign = extractFloatx80Sign( a );
+    bSign = extractFloatx80Sign( b );
+    if ( aSign != bSign ) {
+        return
+               aSign
+            && (    ( ( (bits16) ( ( a.high | b.high )<<1 ) ) | a.low | b.low )
+                 != 0 );
+    }
+    return
+          aSign ? lt128( b.high, b.low, a.high, a.low )
+        : lt128( a.high, a.low, b.high, b.low );
+
+}
+
+#endif
+
diff --git a/arch/arm/nwfpe/softfloat.h b/arch/arm/nwfpe/softfloat.h
new file mode 100644
index 000000000..df4d243a2
--- /dev/null
+++ b/arch/arm/nwfpe/softfloat.h
@@ -0,0 +1,281 @@
+
+/*
+===============================================================================
+
+This C header file is part of the SoftFloat IEC/IEEE Floating-point
+Arithmetic Package, Release 2.
+
+Written by John R. Hauser.  This work was made possible in part by the
+International Computer Science Institute, located at Suite 600, 1947 Center
+Street, Berkeley, California 94704.  Funding was partially provided by the
+National Science Foundation under grant MIP-9311980.  The original version
+of this code was written as part of a project to build a fixed-point vector
+processor in collaboration with the University of California at Berkeley,
+overseen by Profs. Nelson Morgan and John Wawrzynek.  More information
+is available through the Web page
+http://www.jhauser.us/arithmetic/SoftFloat-2b/SoftFloat-source.txt
+
+THIS SOFTWARE IS DISTRIBUTED AS IS, FOR FREE.  Although reasonable effort
+has been made to avoid it, THIS SOFTWARE MAY CONTAIN FAULTS THAT WILL AT
+TIMES RESULT IN INCORRECT BEHAVIOR.  USE OF THIS SOFTWARE IS RESTRICTED TO
+PERSONS AND ORGANIZATIONS WHO CAN AND WILL TAKE FULL RESPONSIBILITY FOR ANY
+AND ALL LOSSES, COSTS, OR OTHER PROBLEMS ARISING FROM ITS USE.
+
+Derivative works are acceptable, even for commercial purposes, so long as
+(1) they include prominent notice that the work is derivative, and (2) they
+include prominent notice akin to these three paragraphs for those parts of
+this code that are retained.
+
+===============================================================================
+*/
+
+#ifndef __SOFTFLOAT_H__
+#define __SOFTFLOAT_H__
+
+
+/*
+-------------------------------------------------------------------------------
+The macro `FLOATX80' must be defined to enable the extended double-precision
+floating-point format `floatx80'.  If this macro is not defined, the
+`floatx80' type will not be defined, and none of the functions that either
+input or output the `floatx80' type will be defined.
+-------------------------------------------------------------------------------
+*/
+#ifdef CONFIG_FPE_NWFPE_XP
+#define FLOATX80
+#endif
+
+/*
+-------------------------------------------------------------------------------
+Software IEC/IEEE floating-point types.
+-------------------------------------------------------------------------------
+*/
+typedef u32 float32;
+typedef u64 float64;
+typedef struct {
+#ifdef __ARMEB__
+    u16 __padding;
+    u16 high;
+#else
+    u16 high;
+    u16 __padding;
+#endif
+    u64 low;
+}  __attribute__ ((packed,aligned(4))) floatx80;
+
+/*
+-------------------------------------------------------------------------------
+Software IEC/IEEE floating-point underflow tininess-detection mode.
+-------------------------------------------------------------------------------
+*/
+extern signed char float_detect_tininess;
+enum {
+    float_tininess_after_rounding  = 0,
+    float_tininess_before_rounding = 1
+};
+
+/*
+-------------------------------------------------------------------------------
+Software IEC/IEEE floating-point rounding mode.
+-------------------------------------------------------------------------------
+*/
+//extern int8 float_rounding_mode;
+enum {
+    float_round_nearest_even = 0,
+    float_round_to_zero      = 1,
+    float_round_down         = 2,
+    float_round_up           = 3
+};
+
+/*
+-------------------------------------------------------------------------------
+Software IEC/IEEE floating-point exception flags.
+-------------------------------------------------------------------------------
+enum {
+    float_flag_inexact   =  1,
+    float_flag_underflow =  2,
+    float_flag_overflow  =  4,
+    float_flag_divbyzero =  8,
+    float_flag_invalid   = 16
+};
+
+ScottB: November 4, 1998
+Changed the enumeration to match the bit order in the FPA11.
+*/
+
+enum {
+    float_flag_invalid   =  1,
+    float_flag_divbyzero =  2,
+    float_flag_overflow  =  4,
+    float_flag_underflow =  8,
+    float_flag_inexact   = 16
+};
+
+/*
+-------------------------------------------------------------------------------
+Routine to raise any or all of the software IEC/IEEE floating-point
+exception flags.
+-------------------------------------------------------------------------------
+*/
+void float_raise( signed char );
+
+/*
+-------------------------------------------------------------------------------
+Software IEC/IEEE integer-to-floating-point conversion routines.
+-------------------------------------------------------------------------------
+*/
+float32 int32_to_float32( struct roundingData *, signed int );
+float64 int32_to_float64( signed int );
+#ifdef FLOATX80
+floatx80 int32_to_floatx80( signed int );
+#endif
+
+/*
+-------------------------------------------------------------------------------
+Software IEC/IEEE single-precision conversion routines.
+-------------------------------------------------------------------------------
+*/
+signed int float32_to_int32( struct roundingData *, float32 );
+signed int float32_to_int32_round_to_zero( float32 );
+float64 float32_to_float64( float32 );
+#ifdef FLOATX80
+floatx80 float32_to_floatx80( float32 );
+#endif
+
+/*
+-------------------------------------------------------------------------------
+Software IEC/IEEE single-precision operations.
+-------------------------------------------------------------------------------
+*/
+float32 float32_round_to_int( struct roundingData*, float32 );
+float32 float32_add( struct roundingData *, float32, float32 );
+float32 float32_sub( struct roundingData *, float32, float32 );
+float32 float32_mul( struct roundingData *, float32, float32 );
+float32 float32_div( struct roundingData *, float32, float32 );
+float32 float32_rem( struct roundingData *, float32, float32 );
+float32 float32_sqrt( struct roundingData*, float32 );
+char float32_eq( float32, float32 );
+char float32_le( float32, float32 );
+char float32_lt( float32, float32 );
+char float32_eq_signaling( float32, float32 );
+char float32_le_quiet( float32, float32 );
+char float32_lt_quiet( float32, float32 );
+char float32_is_signaling_nan( float32 );
+
+/*
+-------------------------------------------------------------------------------
+Software IEC/IEEE double-precision conversion routines.
+-------------------------------------------------------------------------------
+*/
+signed int float64_to_int32( struct roundingData *, float64 );
+signed int float64_to_int32_round_to_zero( float64 );
+float32 float64_to_float32( struct roundingData *, float64 );
+#ifdef FLOATX80
+floatx80 float64_to_floatx80( float64 );
+#endif
+
+/*
+-------------------------------------------------------------------------------
+Software IEC/IEEE double-precision operations.
+-------------------------------------------------------------------------------
+*/
+float64 float64_round_to_int( struct roundingData *, float64 );
+float64 float64_add( struct roundingData *, float64, float64 );
+float64 float64_sub( struct roundingData *, float64, float64 );
+float64 float64_mul( struct roundingData *, float64, float64 );
+float64 float64_div( struct roundingData *, float64, float64 );
+float64 float64_rem( struct roundingData *, float64, float64 );
+float64 float64_sqrt( struct roundingData *, float64 );
+char float64_eq( float64, float64 );
+char float64_le( float64, float64 );
+char float64_lt( float64, float64 );
+char float64_eq_signaling( float64, float64 );
+char float64_le_quiet( float64, float64 );
+char float64_lt_quiet( float64, float64 );
+char float64_is_signaling_nan( float64 );
+
+#ifdef FLOATX80
+
+/*
+-------------------------------------------------------------------------------
+Software IEC/IEEE extended double-precision conversion routines.
+-------------------------------------------------------------------------------
+*/
+signed int floatx80_to_int32( struct roundingData *, floatx80 );
+signed int floatx80_to_int32_round_to_zero( floatx80 );
+float32 floatx80_to_float32( struct roundingData *, floatx80 );
+float64 floatx80_to_float64( struct roundingData *, floatx80 );
+
+/*
+-------------------------------------------------------------------------------
+Software IEC/IEEE extended double-precision operations.
+-------------------------------------------------------------------------------
+*/
+floatx80 floatx80_round_to_int( struct roundingData *, floatx80 );
+floatx80 floatx80_add( struct roundingData *, floatx80, floatx80 );
+floatx80 floatx80_sub( struct roundingData *, floatx80, floatx80 );
+floatx80 floatx80_mul( struct roundingData *, floatx80, floatx80 );
+floatx80 floatx80_div( struct roundingData *, floatx80, floatx80 );
+floatx80 floatx80_rem( struct roundingData *, floatx80, floatx80 );
+floatx80 floatx80_sqrt( struct roundingData *, floatx80 );
+char floatx80_eq( floatx80, floatx80 );
+char floatx80_le( floatx80, floatx80 );
+char floatx80_lt( floatx80, floatx80 );
+char floatx80_eq_signaling( floatx80, floatx80 );
+char floatx80_le_quiet( floatx80, floatx80 );
+char floatx80_lt_quiet( floatx80, floatx80 );
+char floatx80_is_signaling_nan( floatx80 );
+
+extern flag floatx80_is_nan(floatx80);
+
+#endif
+
+static inline flag extractFloat32Sign(float32 a)
+{
+	return a >> 31;
+}
+
+static inline flag float32_eq_nocheck(float32 a, float32 b)
+{
+	return (a == b) || ((bits32) ((a | b) << 1) == 0);
+}
+
+static inline flag float32_lt_nocheck(float32 a, float32 b)
+{
+	flag aSign, bSign;
+
+	aSign = extractFloat32Sign(a);
+	bSign = extractFloat32Sign(b);
+	if (aSign != bSign)
+		return aSign && ((bits32) ((a | b) << 1) != 0);
+	return (a != b) && (aSign ^ (a < b));
+}
+
+static inline flag extractFloat64Sign(float64 a)
+{
+	return a >> 63;
+}
+
+static inline flag float64_eq_nocheck(float64 a, float64 b)
+{
+	return (a == b) || ((bits64) ((a | b) << 1) == 0);
+}
+
+static inline flag float64_lt_nocheck(float64 a, float64 b)
+{
+	flag aSign, bSign;
+
+	aSign = extractFloat64Sign(a);
+	bSign = extractFloat64Sign(b);
+	if (aSign != bSign)
+		return aSign && ((bits64) ((a | b) << 1) != 0);
+	return (a != b) && (aSign ^ (a < b));
+}
+
+extern flag float32_is_nan( float32 a );
+extern flag float64_is_nan( float64 a );
+
+extern int32 float64_to_uint32( struct roundingData *roundData, float64 a );
+extern int32 float64_to_uint32_round_to_zero( float64 a );
+
+#endif