summaryrefslogtreecommitdiff
path: root/arch/arm/plat-pxa/include
diff options
context:
space:
mode:
Diffstat (limited to 'arch/arm/plat-pxa/include')
-rw-r--r--arch/arm/plat-pxa/include/plat/dma.h85
-rw-r--r--arch/arm/plat-pxa/include/plat/mfp.h475
2 files changed, 560 insertions, 0 deletions
diff --git a/arch/arm/plat-pxa/include/plat/dma.h b/arch/arm/plat-pxa/include/plat/dma.h
new file mode 100644
index 000000000..a7b91dc06
--- /dev/null
+++ b/arch/arm/plat-pxa/include/plat/dma.h
@@ -0,0 +1,85 @@
+#ifndef __PLAT_DMA_H
+#define __PLAT_DMA_H
+
+#define DMAC_REG(x) (*((volatile u32 *)(DMAC_REGS_VIRT + (x))))
+
+#define DCSR(n) DMAC_REG((n) << 2)
+#define DALGN DMAC_REG(0x00a0) /* DMA Alignment Register */
+#define DINT DMAC_REG(0x00f0) /* DMA Interrupt Register */
+#define DDADR(n) DMAC_REG(0x0200 + ((n) << 4))
+#define DSADR(n) DMAC_REG(0x0204 + ((n) << 4))
+#define DTADR(n) DMAC_REG(0x0208 + ((n) << 4))
+#define DCMD(n) DMAC_REG(0x020c + ((n) << 4))
+#define DRCMR(n) DMAC_REG((((n) < 64) ? 0x0100 : 0x1100) + \
+ (((n) & 0x3f) << 2))
+
+#define DCSR_RUN (1 << 31) /* Run Bit (read / write) */
+#define DCSR_NODESC (1 << 30) /* No-Descriptor Fetch (read / write) */
+#define DCSR_STOPIRQEN (1 << 29) /* Stop Interrupt Enable (read / write) */
+#define DCSR_REQPEND (1 << 8) /* Request Pending (read-only) */
+#define DCSR_STOPSTATE (1 << 3) /* Stop State (read-only) */
+#define DCSR_ENDINTR (1 << 2) /* End Interrupt (read / write) */
+#define DCSR_STARTINTR (1 << 1) /* Start Interrupt (read / write) */
+#define DCSR_BUSERR (1 << 0) /* Bus Error Interrupt (read / write) */
+
+#define DCSR_EORIRQEN (1 << 28) /* End of Receive Interrupt Enable (R/W) */
+#define DCSR_EORJMPEN (1 << 27) /* Jump to next descriptor on EOR */
+#define DCSR_EORSTOPEN (1 << 26) /* STOP on an EOR */
+#define DCSR_SETCMPST (1 << 25) /* Set Descriptor Compare Status */
+#define DCSR_CLRCMPST (1 << 24) /* Clear Descriptor Compare Status */
+#define DCSR_CMPST (1 << 10) /* The Descriptor Compare Status */
+#define DCSR_EORINTR (1 << 9) /* The end of Receive */
+
+#define DRCMR_MAPVLD (1 << 7) /* Map Valid (read / write) */
+#define DRCMR_CHLNUM 0x1f /* mask for Channel Number (read / write) */
+
+#define DDADR_DESCADDR 0xfffffff0 /* Address of next descriptor (mask) */
+#define DDADR_STOP (1 << 0) /* Stop (read / write) */
+
+#define DCMD_INCSRCADDR (1 << 31) /* Source Address Increment Setting. */
+#define DCMD_INCTRGADDR (1 << 30) /* Target Address Increment Setting. */
+#define DCMD_FLOWSRC (1 << 29) /* Flow Control by the source. */
+#define DCMD_FLOWTRG (1 << 28) /* Flow Control by the target. */
+#define DCMD_STARTIRQEN (1 << 22) /* Start Interrupt Enable */
+#define DCMD_ENDIRQEN (1 << 21) /* End Interrupt Enable */
+#define DCMD_ENDIAN (1 << 18) /* Device Endian-ness. */
+#define DCMD_BURST8 (1 << 16) /* 8 byte burst */
+#define DCMD_BURST16 (2 << 16) /* 16 byte burst */
+#define DCMD_BURST32 (3 << 16) /* 32 byte burst */
+#define DCMD_WIDTH1 (1 << 14) /* 1 byte width */
+#define DCMD_WIDTH2 (2 << 14) /* 2 byte width (HalfWord) */
+#define DCMD_WIDTH4 (3 << 14) /* 4 byte width (Word) */
+#define DCMD_LENGTH 0x01fff /* length mask (max = 8K - 1) */
+
+/*
+ * Descriptor structure for PXA's DMA engine
+ * Note: this structure must always be aligned to a 16-byte boundary.
+ */
+
+typedef struct pxa_dma_desc {
+ volatile u32 ddadr; /* Points to the next descriptor + flags */
+ volatile u32 dsadr; /* DSADR value for the current transfer */
+ volatile u32 dtadr; /* DTADR value for the current transfer */
+ volatile u32 dcmd; /* DCMD value for the current transfer */
+} pxa_dma_desc;
+
+typedef enum {
+ DMA_PRIO_HIGH = 0,
+ DMA_PRIO_MEDIUM = 1,
+ DMA_PRIO_LOW = 2
+} pxa_dma_prio;
+
+/*
+ * DMA registration
+ */
+
+int __init pxa_init_dma(int irq, int num_ch);
+
+int pxa_request_dma (char *name,
+ pxa_dma_prio prio,
+ void (*irq_handler)(int, void *),
+ void *data);
+
+void pxa_free_dma (int dma_ch);
+
+#endif /* __PLAT_DMA_H */
diff --git a/arch/arm/plat-pxa/include/plat/mfp.h b/arch/arm/plat-pxa/include/plat/mfp.h
new file mode 100644
index 000000000..10bc4f375
--- /dev/null
+++ b/arch/arm/plat-pxa/include/plat/mfp.h
@@ -0,0 +1,475 @@
+/*
+ * arch/arm/plat-pxa/include/plat/mfp.h
+ *
+ * Common Multi-Function Pin Definitions
+ *
+ * Copyright (C) 2007 Marvell International Ltd.
+ *
+ * 2007-8-21: eric miao <eric.miao@marvell.com>
+ * initial version
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_PLAT_MFP_H
+#define __ASM_PLAT_MFP_H
+
+#define mfp_to_gpio(m) ((m) % 256)
+
+/* list of all the configurable MFP pins */
+enum {
+ MFP_PIN_INVALID = -1,
+
+ MFP_PIN_GPIO0 = 0,
+ MFP_PIN_GPIO1,
+ MFP_PIN_GPIO2,
+ MFP_PIN_GPIO3,
+ MFP_PIN_GPIO4,
+ MFP_PIN_GPIO5,
+ MFP_PIN_GPIO6,
+ MFP_PIN_GPIO7,
+ MFP_PIN_GPIO8,
+ MFP_PIN_GPIO9,
+ MFP_PIN_GPIO10,
+ MFP_PIN_GPIO11,
+ MFP_PIN_GPIO12,
+ MFP_PIN_GPIO13,
+ MFP_PIN_GPIO14,
+ MFP_PIN_GPIO15,
+ MFP_PIN_GPIO16,
+ MFP_PIN_GPIO17,
+ MFP_PIN_GPIO18,
+ MFP_PIN_GPIO19,
+ MFP_PIN_GPIO20,
+ MFP_PIN_GPIO21,
+ MFP_PIN_GPIO22,
+ MFP_PIN_GPIO23,
+ MFP_PIN_GPIO24,
+ MFP_PIN_GPIO25,
+ MFP_PIN_GPIO26,
+ MFP_PIN_GPIO27,
+ MFP_PIN_GPIO28,
+ MFP_PIN_GPIO29,
+ MFP_PIN_GPIO30,
+ MFP_PIN_GPIO31,
+ MFP_PIN_GPIO32,
+ MFP_PIN_GPIO33,
+ MFP_PIN_GPIO34,
+ MFP_PIN_GPIO35,
+ MFP_PIN_GPIO36,
+ MFP_PIN_GPIO37,
+ MFP_PIN_GPIO38,
+ MFP_PIN_GPIO39,
+ MFP_PIN_GPIO40,
+ MFP_PIN_GPIO41,
+ MFP_PIN_GPIO42,
+ MFP_PIN_GPIO43,
+ MFP_PIN_GPIO44,
+ MFP_PIN_GPIO45,
+ MFP_PIN_GPIO46,
+ MFP_PIN_GPIO47,
+ MFP_PIN_GPIO48,
+ MFP_PIN_GPIO49,
+ MFP_PIN_GPIO50,
+ MFP_PIN_GPIO51,
+ MFP_PIN_GPIO52,
+ MFP_PIN_GPIO53,
+ MFP_PIN_GPIO54,
+ MFP_PIN_GPIO55,
+ MFP_PIN_GPIO56,
+ MFP_PIN_GPIO57,
+ MFP_PIN_GPIO58,
+ MFP_PIN_GPIO59,
+ MFP_PIN_GPIO60,
+ MFP_PIN_GPIO61,
+ MFP_PIN_GPIO62,
+ MFP_PIN_GPIO63,
+ MFP_PIN_GPIO64,
+ MFP_PIN_GPIO65,
+ MFP_PIN_GPIO66,
+ MFP_PIN_GPIO67,
+ MFP_PIN_GPIO68,
+ MFP_PIN_GPIO69,
+ MFP_PIN_GPIO70,
+ MFP_PIN_GPIO71,
+ MFP_PIN_GPIO72,
+ MFP_PIN_GPIO73,
+ MFP_PIN_GPIO74,
+ MFP_PIN_GPIO75,
+ MFP_PIN_GPIO76,
+ MFP_PIN_GPIO77,
+ MFP_PIN_GPIO78,
+ MFP_PIN_GPIO79,
+ MFP_PIN_GPIO80,
+ MFP_PIN_GPIO81,
+ MFP_PIN_GPIO82,
+ MFP_PIN_GPIO83,
+ MFP_PIN_GPIO84,
+ MFP_PIN_GPIO85,
+ MFP_PIN_GPIO86,
+ MFP_PIN_GPIO87,
+ MFP_PIN_GPIO88,
+ MFP_PIN_GPIO89,
+ MFP_PIN_GPIO90,
+ MFP_PIN_GPIO91,
+ MFP_PIN_GPIO92,
+ MFP_PIN_GPIO93,
+ MFP_PIN_GPIO94,
+ MFP_PIN_GPIO95,
+ MFP_PIN_GPIO96,
+ MFP_PIN_GPIO97,
+ MFP_PIN_GPIO98,
+ MFP_PIN_GPIO99,
+ MFP_PIN_GPIO100,
+ MFP_PIN_GPIO101,
+ MFP_PIN_GPIO102,
+ MFP_PIN_GPIO103,
+ MFP_PIN_GPIO104,
+ MFP_PIN_GPIO105,
+ MFP_PIN_GPIO106,
+ MFP_PIN_GPIO107,
+ MFP_PIN_GPIO108,
+ MFP_PIN_GPIO109,
+ MFP_PIN_GPIO110,
+ MFP_PIN_GPIO111,
+ MFP_PIN_GPIO112,
+ MFP_PIN_GPIO113,
+ MFP_PIN_GPIO114,
+ MFP_PIN_GPIO115,
+ MFP_PIN_GPIO116,
+ MFP_PIN_GPIO117,
+ MFP_PIN_GPIO118,
+ MFP_PIN_GPIO119,
+ MFP_PIN_GPIO120,
+ MFP_PIN_GPIO121,
+ MFP_PIN_GPIO122,
+ MFP_PIN_GPIO123,
+ MFP_PIN_GPIO124,
+ MFP_PIN_GPIO125,
+ MFP_PIN_GPIO126,
+ MFP_PIN_GPIO127,
+
+ MFP_PIN_GPIO128,
+ MFP_PIN_GPIO129,
+ MFP_PIN_GPIO130,
+ MFP_PIN_GPIO131,
+ MFP_PIN_GPIO132,
+ MFP_PIN_GPIO133,
+ MFP_PIN_GPIO134,
+ MFP_PIN_GPIO135,
+ MFP_PIN_GPIO136,
+ MFP_PIN_GPIO137,
+ MFP_PIN_GPIO138,
+ MFP_PIN_GPIO139,
+ MFP_PIN_GPIO140,
+ MFP_PIN_GPIO141,
+ MFP_PIN_GPIO142,
+ MFP_PIN_GPIO143,
+ MFP_PIN_GPIO144,
+ MFP_PIN_GPIO145,
+ MFP_PIN_GPIO146,
+ MFP_PIN_GPIO147,
+ MFP_PIN_GPIO148,
+ MFP_PIN_GPIO149,
+ MFP_PIN_GPIO150,
+ MFP_PIN_GPIO151,
+ MFP_PIN_GPIO152,
+ MFP_PIN_GPIO153,
+ MFP_PIN_GPIO154,
+ MFP_PIN_GPIO155,
+ MFP_PIN_GPIO156,
+ MFP_PIN_GPIO157,
+ MFP_PIN_GPIO158,
+ MFP_PIN_GPIO159,
+ MFP_PIN_GPIO160,
+ MFP_PIN_GPIO161,
+ MFP_PIN_GPIO162,
+ MFP_PIN_GPIO163,
+ MFP_PIN_GPIO164,
+ MFP_PIN_GPIO165,
+ MFP_PIN_GPIO166,
+ MFP_PIN_GPIO167,
+ MFP_PIN_GPIO168,
+ MFP_PIN_GPIO169,
+ MFP_PIN_GPIO170,
+ MFP_PIN_GPIO171,
+ MFP_PIN_GPIO172,
+ MFP_PIN_GPIO173,
+ MFP_PIN_GPIO174,
+ MFP_PIN_GPIO175,
+ MFP_PIN_GPIO176,
+ MFP_PIN_GPIO177,
+ MFP_PIN_GPIO178,
+ MFP_PIN_GPIO179,
+ MFP_PIN_GPIO180,
+ MFP_PIN_GPIO181,
+ MFP_PIN_GPIO182,
+ MFP_PIN_GPIO183,
+ MFP_PIN_GPIO184,
+ MFP_PIN_GPIO185,
+ MFP_PIN_GPIO186,
+ MFP_PIN_GPIO187,
+ MFP_PIN_GPIO188,
+ MFP_PIN_GPIO189,
+ MFP_PIN_GPIO190,
+ MFP_PIN_GPIO191,
+
+ MFP_PIN_GPIO255 = 255,
+
+ MFP_PIN_GPIO0_2,
+ MFP_PIN_GPIO1_2,
+ MFP_PIN_GPIO2_2,
+ MFP_PIN_GPIO3_2,
+ MFP_PIN_GPIO4_2,
+ MFP_PIN_GPIO5_2,
+ MFP_PIN_GPIO6_2,
+ MFP_PIN_GPIO7_2,
+ MFP_PIN_GPIO8_2,
+ MFP_PIN_GPIO9_2,
+ MFP_PIN_GPIO10_2,
+ MFP_PIN_GPIO11_2,
+ MFP_PIN_GPIO12_2,
+ MFP_PIN_GPIO13_2,
+ MFP_PIN_GPIO14_2,
+ MFP_PIN_GPIO15_2,
+ MFP_PIN_GPIO16_2,
+ MFP_PIN_GPIO17_2,
+
+ MFP_PIN_ULPI_STP,
+ MFP_PIN_ULPI_NXT,
+ MFP_PIN_ULPI_DIR,
+
+ MFP_PIN_nXCVREN,
+ MFP_PIN_DF_CLE_nOE,
+ MFP_PIN_DF_nADV1_ALE,
+ MFP_PIN_DF_SCLK_E,
+ MFP_PIN_DF_SCLK_S,
+ MFP_PIN_nBE0,
+ MFP_PIN_nBE1,
+ MFP_PIN_DF_nADV2_ALE,
+ MFP_PIN_DF_INT_RnB,
+ MFP_PIN_DF_nCS0,
+ MFP_PIN_DF_nCS1,
+ MFP_PIN_nLUA,
+ MFP_PIN_nLLA,
+ MFP_PIN_DF_nWE,
+ MFP_PIN_DF_ALE_nWE,
+ MFP_PIN_DF_nRE_nOE,
+ MFP_PIN_DF_ADDR0,
+ MFP_PIN_DF_ADDR1,
+ MFP_PIN_DF_ADDR2,
+ MFP_PIN_DF_ADDR3,
+ MFP_PIN_DF_IO0,
+ MFP_PIN_DF_IO1,
+ MFP_PIN_DF_IO2,
+ MFP_PIN_DF_IO3,
+ MFP_PIN_DF_IO4,
+ MFP_PIN_DF_IO5,
+ MFP_PIN_DF_IO6,
+ MFP_PIN_DF_IO7,
+ MFP_PIN_DF_IO8,
+ MFP_PIN_DF_IO9,
+ MFP_PIN_DF_IO10,
+ MFP_PIN_DF_IO11,
+ MFP_PIN_DF_IO12,
+ MFP_PIN_DF_IO13,
+ MFP_PIN_DF_IO14,
+ MFP_PIN_DF_IO15,
+ MFP_PIN_DF_nCS0_SM_nCS2,
+ MFP_PIN_DF_nCS1_SM_nCS3,
+ MFP_PIN_SM_nCS0,
+ MFP_PIN_SM_nCS1,
+ MFP_PIN_DF_WEn,
+ MFP_PIN_DF_REn,
+ MFP_PIN_DF_CLE_SM_OEn,
+ MFP_PIN_DF_ALE_SM_WEn,
+ MFP_PIN_DF_RDY0,
+ MFP_PIN_DF_RDY1,
+
+ MFP_PIN_SM_SCLK,
+ MFP_PIN_SM_BE0,
+ MFP_PIN_SM_BE1,
+ MFP_PIN_SM_ADV,
+ MFP_PIN_SM_ADVMUX,
+ MFP_PIN_SM_RDY,
+
+ MFP_PIN_MMC1_DAT7,
+ MFP_PIN_MMC1_DAT6,
+ MFP_PIN_MMC1_DAT5,
+ MFP_PIN_MMC1_DAT4,
+ MFP_PIN_MMC1_DAT3,
+ MFP_PIN_MMC1_DAT2,
+ MFP_PIN_MMC1_DAT1,
+ MFP_PIN_MMC1_DAT0,
+ MFP_PIN_MMC1_CMD,
+ MFP_PIN_MMC1_CLK,
+ MFP_PIN_MMC1_CD,
+ MFP_PIN_MMC1_WP,
+
+ /* additional pins on PXA930 */
+ MFP_PIN_GSIM_UIO,
+ MFP_PIN_GSIM_UCLK,
+ MFP_PIN_GSIM_UDET,
+ MFP_PIN_GSIM_nURST,
+ MFP_PIN_PMIC_INT,
+ MFP_PIN_RDY,
+
+ /* additional pins on MMP2 */
+ MFP_PIN_TWSI1_SCL,
+ MFP_PIN_TWSI1_SDA,
+ MFP_PIN_TWSI4_SCL,
+ MFP_PIN_TWSI4_SDA,
+ MFP_PIN_CLK_REQ,
+
+ MFP_PIN_MAX,
+};
+
+/*
+ * a possible MFP configuration is represented by a 32-bit integer
+ *
+ * bit 0.. 9 - MFP Pin Number (1024 Pins Maximum)
+ * bit 10..12 - Alternate Function Selection
+ * bit 13..15 - Drive Strength
+ * bit 16..18 - Low Power Mode State
+ * bit 19..20 - Low Power Mode Edge Detection
+ * bit 21..22 - Run Mode Pull State
+ *
+ * to facilitate the definition, the following macros are provided
+ *
+ * MFP_CFG_DEFAULT - default MFP configuration value, with
+ * alternate function = 0,
+ * drive strength = fast 3mA (MFP_DS03X)
+ * low power mode = default
+ * edge detection = none
+ *
+ * MFP_CFG - default MFPR value with alternate function
+ * MFP_CFG_DRV - default MFPR value with alternate function and
+ * pin drive strength
+ * MFP_CFG_LPM - default MFPR value with alternate function and
+ * low power mode
+ * MFP_CFG_X - default MFPR value with alternate function,
+ * pin drive strength and low power mode
+ */
+
+typedef unsigned long mfp_cfg_t;
+
+#define MFP_PIN(x) ((x) & 0x3ff)
+
+#define MFP_AF0 (0x0 << 10)
+#define MFP_AF1 (0x1 << 10)
+#define MFP_AF2 (0x2 << 10)
+#define MFP_AF3 (0x3 << 10)
+#define MFP_AF4 (0x4 << 10)
+#define MFP_AF5 (0x5 << 10)
+#define MFP_AF6 (0x6 << 10)
+#define MFP_AF7 (0x7 << 10)
+#define MFP_AF_MASK (0x7 << 10)
+#define MFP_AF(x) (((x) >> 10) & 0x7)
+
+#define MFP_DS01X (0x0 << 13)
+#define MFP_DS02X (0x1 << 13)
+#define MFP_DS03X (0x2 << 13)
+#define MFP_DS04X (0x3 << 13)
+#define MFP_DS06X (0x4 << 13)
+#define MFP_DS08X (0x5 << 13)
+#define MFP_DS10X (0x6 << 13)
+#define MFP_DS13X (0x7 << 13)
+#define MFP_DS_MASK (0x7 << 13)
+#define MFP_DS(x) (((x) >> 13) & 0x7)
+
+#define MFP_LPM_DEFAULT (0x0 << 16)
+#define MFP_LPM_DRIVE_LOW (0x1 << 16)
+#define MFP_LPM_DRIVE_HIGH (0x2 << 16)
+#define MFP_LPM_PULL_LOW (0x3 << 16)
+#define MFP_LPM_PULL_HIGH (0x4 << 16)
+#define MFP_LPM_FLOAT (0x5 << 16)
+#define MFP_LPM_INPUT (0x6 << 16)
+#define MFP_LPM_STATE_MASK (0x7 << 16)
+#define MFP_LPM_STATE(x) (((x) >> 16) & 0x7)
+
+#define MFP_LPM_EDGE_NONE (0x0 << 19)
+#define MFP_LPM_EDGE_RISE (0x1 << 19)
+#define MFP_LPM_EDGE_FALL (0x2 << 19)
+#define MFP_LPM_EDGE_BOTH (0x3 << 19)
+#define MFP_LPM_EDGE_MASK (0x3 << 19)
+#define MFP_LPM_EDGE(x) (((x) >> 19) & 0x3)
+
+#define MFP_PULL_NONE (0x0 << 21)
+#define MFP_PULL_LOW (0x1 << 21)
+#define MFP_PULL_HIGH (0x2 << 21)
+#define MFP_PULL_BOTH (0x3 << 21)
+#define MFP_PULL_FLOAT (0x4 << 21)
+#define MFP_PULL_MASK (0x7 << 21)
+#define MFP_PULL(x) (((x) >> 21) & 0x7)
+
+#define MFP_CFG_DEFAULT (MFP_AF0 | MFP_DS03X | MFP_LPM_DEFAULT |\
+ MFP_LPM_EDGE_NONE | MFP_PULL_NONE)
+
+#define MFP_CFG(pin, af) \
+ ((MFP_CFG_DEFAULT & ~MFP_AF_MASK) |\
+ (MFP_PIN(MFP_PIN_##pin) | MFP_##af))
+
+#define MFP_CFG_DRV(pin, af, drv) \
+ ((MFP_CFG_DEFAULT & ~(MFP_AF_MASK | MFP_DS_MASK)) |\
+ (MFP_PIN(MFP_PIN_##pin) | MFP_##af | MFP_##drv))
+
+#define MFP_CFG_LPM(pin, af, lpm) \
+ ((MFP_CFG_DEFAULT & ~(MFP_AF_MASK | MFP_LPM_STATE_MASK)) |\
+ (MFP_PIN(MFP_PIN_##pin) | MFP_##af | MFP_LPM_##lpm))
+
+#define MFP_CFG_X(pin, af, drv, lpm) \
+ ((MFP_CFG_DEFAULT & ~(MFP_AF_MASK | MFP_DS_MASK | MFP_LPM_STATE_MASK)) |\
+ (MFP_PIN(MFP_PIN_##pin) | MFP_##af | MFP_##drv | MFP_LPM_##lpm))
+
+#if defined(CONFIG_PXA3xx) || defined(CONFIG_ARCH_MMP)
+/*
+ * each MFP pin will have a MFPR register, since the offset of the
+ * register varies between processors, the processor specific code
+ * should initialize the pin offsets by mfp_init()
+ *
+ * mfp_init_base() - accepts a virtual base for all MFPR registers and
+ * initialize the MFP table to a default state
+ *
+ * mfp_init_addr() - accepts a table of "mfp_addr_map" structure, which
+ * represents a range of MFP pins from "start" to "end", with the offset
+ * beginning at "offset", to define a single pin, let "end" = -1.
+ *
+ * use
+ *
+ * MFP_ADDR_X() to define a range of pins
+ * MFP_ADDR() to define a single pin
+ * MFP_ADDR_END to signal the end of pin offset definitions
+ */
+struct mfp_addr_map {
+ unsigned int start;
+ unsigned int end;
+ unsigned long offset;
+};
+
+#define MFP_ADDR_X(start, end, offset) \
+ { MFP_PIN_##start, MFP_PIN_##end, offset }
+
+#define MFP_ADDR(pin, offset) \
+ { MFP_PIN_##pin, -1, offset }
+
+#define MFP_ADDR_END { MFP_PIN_INVALID, 0 }
+
+void __init mfp_init_base(void __iomem *mfpr_base);
+void __init mfp_init_addr(struct mfp_addr_map *map);
+
+/*
+ * mfp_{read, write}() - for direct read/write access to the MFPR register
+ * mfp_config() - for configuring a group of MFPR registers
+ * mfp_config_lpm() - configuring all low power MFPR registers for suspend
+ * mfp_config_run() - configuring all run time MFPR registers after resume
+ */
+unsigned long mfp_read(int mfp);
+void mfp_write(int mfp, unsigned long mfpr_val);
+void mfp_config(unsigned long *mfp_cfgs, int num);
+void mfp_config_run(void);
+void mfp_config_lpm(void);
+#endif /* CONFIG_PXA3xx || CONFIG_ARCH_MMP */
+
+#endif /* __ASM_PLAT_MFP_H */