diff options
Diffstat (limited to 'arch/arm64/boot/dts')
45 files changed, 5960 insertions, 0 deletions
diff --git a/arch/arm64/boot/dts/.gitignore b/arch/arm64/boot/dts/.gitignore new file mode 100644 index 000000000..b60ed208c --- /dev/null +++ b/arch/arm64/boot/dts/.gitignore @@ -0,0 +1 @@ +*.dtb diff --git a/arch/arm64/boot/dts/Makefile b/arch/arm64/boot/dts/Makefile new file mode 100644 index 000000000..ad26a752b --- /dev/null +++ b/arch/arm64/boot/dts/Makefile @@ -0,0 +1,12 @@ +dts-dirs += amd +dts-dirs += apm +dts-dirs += arm +dts-dirs += cavium +dts-dirs += exynos +dts-dirs += freescale +dts-dirs += mediatek +dts-dirs += qcom +dts-dirs += sprd +dts-dirs += xilinx + +subdir-y := $(dts-dirs) diff --git a/arch/arm64/boot/dts/amd/Makefile b/arch/arm64/boot/dts/amd/Makefile new file mode 100644 index 000000000..cfdf701e0 --- /dev/null +++ b/arch/arm64/boot/dts/amd/Makefile @@ -0,0 +1,5 @@ +dtb-$(CONFIG_ARCH_SEATTLE) += amd-overdrive.dtb + +always := $(dtb-y) +subdir-y := $(dts-dirs) +clean-files := *.dtb diff --git a/arch/arm64/boot/dts/amd/amd-overdrive.dts b/arch/arm64/boot/dts/amd/amd-overdrive.dts new file mode 100644 index 000000000..564a3f7df --- /dev/null +++ b/arch/arm64/boot/dts/amd/amd-overdrive.dts @@ -0,0 +1,66 @@ +/* + * DTS file for AMD Seattle Overdrive Development Board + * + * Copyright (C) 2014 Advanced Micro Devices, Inc. + */ + +/dts-v1/; + +/include/ "amd-seattle-soc.dtsi" + +/ { + model = "AMD Seattle Development Board (Overdrive)"; + compatible = "amd,seattle-overdrive", "amd,seattle"; + + chosen { + stdout-path = &serial0; + linux,pci-probe-only; + }; +}; + +&ccp0 { + status = "ok"; +}; + +&gpio0 { + status = "ok"; +}; + +&gpio1 { + status = "ok"; +}; + +&i2c0 { + status = "ok"; +}; + +&pcie0 { + status = "ok"; +}; + +&spi0 { + status = "ok"; +}; + +&spi1 { + status = "ok"; + sdcard0: sdcard@0 { + compatible = "mmc-spi-slot"; + reg = <0>; + spi-max-frequency = <20000000>; + voltage-ranges = <3200 3400>; + gpios = <&gpio0 7 0>; + interrupt-parent = <&gpio0>; + interrupts = <7 3>; + pl022,hierarchy = <0>; + pl022,interface = <0>; + pl022,com-mode = <0x0>; + pl022,rx-level-trig = <0>; + pl022,tx-level-trig = <0>; + }; +}; + +&v2m0 { + arm,msi-base-spi = <64>; + arm,msi-num-spis = <256>; +}; diff --git a/arch/arm64/boot/dts/amd/amd-seattle-clks.dtsi b/arch/arm64/boot/dts/amd/amd-seattle-clks.dtsi new file mode 100644 index 000000000..f623c4652 --- /dev/null +++ b/arch/arm64/boot/dts/amd/amd-seattle-clks.dtsi @@ -0,0 +1,54 @@ +/* + * DTS file for AMD Seattle Clocks + * + * Copyright (C) 2014 Advanced Micro Devices, Inc. + */ + + adl3clk_100mhz: clk100mhz_0 { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <100000000>; + clock-output-names = "adl3clk_100mhz"; + }; + + ccpclk_375mhz: clk375mhz { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <375000000>; + clock-output-names = "ccpclk_375mhz"; + }; + + sataclk_333mhz: clk333mhz { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <333000000>; + clock-output-names = "sataclk_333mhz"; + }; + + pcieclk_500mhz: clk500mhz_0 { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <500000000>; + clock-output-names = "pcieclk_500mhz"; + }; + + dmaclk_500mhz: clk500mhz_1 { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <500000000>; + clock-output-names = "dmaclk_500mhz"; + }; + + miscclk_250mhz: clk250mhz_4 { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <250000000>; + clock-output-names = "miscclk_250mhz"; + }; + + uartspiclk_100mhz: clk100mhz_1 { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <100000000>; + clock-output-names = "uartspiclk_100mhz"; + }; diff --git a/arch/arm64/boot/dts/amd/amd-seattle-soc.dtsi b/arch/arm64/boot/dts/amd/amd-seattle-soc.dtsi new file mode 100644 index 000000000..2874d9288 --- /dev/null +++ b/arch/arm64/boot/dts/amd/amd-seattle-soc.dtsi @@ -0,0 +1,172 @@ +/* + * DTS file for AMD Seattle SoC + * + * Copyright (C) 2014 Advanced Micro Devices, Inc. + */ + +/ { + compatible = "amd,seattle"; + interrupt-parent = <&gic0>; + #address-cells = <2>; + #size-cells = <2>; + + gic0: interrupt-controller@e1101000 { + compatible = "arm,gic-400", "arm,cortex-a15-gic"; + interrupt-controller; + #interrupt-cells = <3>; + #address-cells = <2>; + #size-cells = <2>; + reg = <0x0 0xe1110000 0 0x1000>, + <0x0 0xe112f000 0 0x2000>, + <0x0 0xe1140000 0 0x10000>, + <0x0 0xe1160000 0 0x10000>; + interrupts = <1 9 0xf04>; + ranges = <0 0 0 0xe1100000 0 0x100000>; + v2m0: v2m@e0080000 { + compatible = "arm,gic-v2m-frame"; + msi-controller; + reg = <0x0 0x00080000 0 0x1000>; + }; + }; + + timer { + compatible = "arm,armv8-timer"; + interrupts = <1 13 0xff04>, + <1 14 0xff04>, + <1 11 0xff04>, + <1 10 0xff04>; + }; + + pmu { + compatible = "arm,armv8-pmuv3"; + interrupts = <0 7 4>, + <0 8 4>, + <0 9 4>, + <0 10 4>, + <0 11 4>, + <0 12 4>, + <0 13 4>, + <0 14 4>; + }; + + smb0: smb { + compatible = "simple-bus"; + #address-cells = <2>; + #size-cells = <2>; + ranges; + + /* DDR range is 40-bit addressing */ + dma-ranges = <0x80 0x0 0x80 0x0 0x7f 0xffffffff>; + + /include/ "amd-seattle-clks.dtsi" + + sata0: sata@e0300000 { + compatible = "snps,dwc-ahci"; + reg = <0 0xe0300000 0 0x800>; + interrupts = <0 355 4>; + clocks = <&sataclk_333mhz>; + dma-coherent; + }; + + i2c0: i2c@e1000000 { + status = "disabled"; + compatible = "snps,designware-i2c"; + reg = <0 0xe1000000 0 0x1000>; + interrupts = <0 357 4>; + clocks = <&uartspiclk_100mhz>; + }; + + serial0: serial@e1010000 { + compatible = "arm,pl011", "arm,primecell"; + reg = <0 0xe1010000 0 0x1000>; + interrupts = <0 328 4>; + clocks = <&uartspiclk_100mhz>, <&uartspiclk_100mhz>; + clock-names = "uartclk", "apb_pclk"; + }; + + spi0: ssp@e1020000 { + status = "disabled"; + compatible = "arm,pl022", "arm,primecell"; + #gpio-cells = <2>; + reg = <0 0xe1020000 0 0x1000>; + spi-controller; + interrupts = <0 330 4>; + clocks = <&uartspiclk_100mhz>; + clock-names = "apb_pclk"; + }; + + spi1: ssp@e1030000 { + status = "disabled"; + compatible = "arm,pl022", "arm,primecell"; + #gpio-cells = <2>; + reg = <0 0xe1030000 0 0x1000>; + spi-controller; + interrupts = <0 329 4>; + clocks = <&uartspiclk_100mhz>; + clock-names = "apb_pclk"; + num-cs = <1>; + #address-cells = <1>; + #size-cells = <0>; + }; + + gpio0: gpio@e1040000 { + status = "disabled"; + compatible = "arm,pl061", "arm,primecell"; + #gpio-cells = <2>; + reg = <0 0xe1040000 0 0x1000>; + gpio-controller; + interrupts = <0 359 4>; + interrupt-controller; + #interrupt-cells = <2>; + clocks = <&uartspiclk_100mhz>; + clock-names = "apb_pclk"; + }; + + gpio1: gpio@e1050000 { + status = "disabled"; + compatible = "arm,pl061", "arm,primecell"; + #gpio-cells = <2>; + reg = <0 0xe1050000 0 0x1000>; + gpio-controller; + interrupts = <0 358 4>; + clocks = <&uartspiclk_100mhz>; + clock-names = "apb_pclk"; + }; + + ccp0: ccp@e0100000 { + status = "disabled"; + compatible = "amd,ccp-seattle-v1a"; + reg = <0 0xe0100000 0 0x10000>; + interrupts = <0 3 4>; + dma-coherent; + }; + + pcie0: pcie@f0000000 { + compatible = "pci-host-ecam-generic"; + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + device_type = "pci"; + bus-range = <0 0x7f>; + msi-parent = <&v2m0>; + reg = <0 0xf0000000 0 0x10000000>; + + interrupt-map-mask = <0xf800 0x0 0x0 0x7>; + interrupt-map = + <0x1000 0x0 0x0 0x1 &gic0 0x0 0x0 0x0 0x120 0x1>, + <0x1000 0x0 0x0 0x2 &gic0 0x0 0x0 0x0 0x121 0x1>, + <0x1000 0x0 0x0 0x3 &gic0 0x0 0x0 0x0 0x122 0x1>, + <0x1000 0x0 0x0 0x4 &gic0 0x0 0x0 0x0 0x123 0x1>; + + dma-coherent; + dma-ranges = <0x43000000 0x80 0x0 0x80 0x0 0x7f 0xffffffff>; + ranges = + /* I/O Memory (size=64K) */ + <0x01000000 0x00 0x00000000 0x00 0xefff0000 0x00 0x00010000>, + /* 32-bit MMIO (size=2G) */ + <0x02000000 0x00 0x40000000 0x00 0x40000000 0x00 0x80000000>, + /* 64-bit MMIO (size= 124G) */ + <0x03000000 0x01 0x00000000 0x01 0x00000000 0x7f 0x00000000>; + }; + }; +}; diff --git a/arch/arm64/boot/dts/apm/Makefile b/arch/arm64/boot/dts/apm/Makefile new file mode 100644 index 000000000..a2afabbc1 --- /dev/null +++ b/arch/arm64/boot/dts/apm/Makefile @@ -0,0 +1,5 @@ +dtb-$(CONFIG_ARCH_XGENE) += apm-mustang.dtb + +always := $(dtb-y) +subdir-y := $(dts-dirs) +clean-files := *.dtb diff --git a/arch/arm64/boot/dts/apm/apm-mustang.dts b/arch/arm64/boot/dts/apm/apm-mustang.dts new file mode 100644 index 000000000..83578e766 --- /dev/null +++ b/arch/arm64/boot/dts/apm/apm-mustang.dts @@ -0,0 +1,54 @@ +/* + * dts file for AppliedMicro (APM) Mustang Board + * + * Copyright (C) 2013, Applied Micro Circuits Corporation + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + */ + +/dts-v1/; + +/include/ "apm-storm.dtsi" + +/ { + model = "APM X-Gene Mustang board"; + compatible = "apm,mustang", "apm,xgene-storm"; + + chosen { }; + + memory { + device_type = "memory"; + reg = < 0x1 0x00000000 0x0 0x80000000 >; /* Updated by bootloader */ + }; +}; + +&pcie0clk { + status = "ok"; +}; + +&pcie0 { + status = "ok"; +}; + +&serial0 { + status = "ok"; +}; + +&menet { + status = "ok"; +}; + +&sgenet0 { + status = "ok"; +}; + +&sgenet1 { + status = "ok"; +}; + +&xgenet { + status = "ok"; +}; diff --git a/arch/arm64/boot/dts/apm/apm-storm.dtsi b/arch/arm64/boot/dts/apm/apm-storm.dtsi new file mode 100644 index 000000000..c8d3e0e86 --- /dev/null +++ b/arch/arm64/boot/dts/apm/apm-storm.dtsi @@ -0,0 +1,714 @@ +/* + * dts file for AppliedMicro (APM) X-Gene Storm SOC + * + * Copyright (C) 2013, Applied Micro Circuits Corporation + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + */ + +/ { + compatible = "apm,xgene-storm"; + interrupt-parent = <&gic>; + #address-cells = <2>; + #size-cells = <2>; + + cpus { + #address-cells = <2>; + #size-cells = <0>; + + cpu@000 { + device_type = "cpu"; + compatible = "apm,potenza", "arm,armv8"; + reg = <0x0 0x000>; + enable-method = "spin-table"; + cpu-release-addr = <0x1 0x0000fff8>; + }; + cpu@001 { + device_type = "cpu"; + compatible = "apm,potenza", "arm,armv8"; + reg = <0x0 0x001>; + enable-method = "spin-table"; + cpu-release-addr = <0x1 0x0000fff8>; + }; + cpu@100 { + device_type = "cpu"; + compatible = "apm,potenza", "arm,armv8"; + reg = <0x0 0x100>; + enable-method = "spin-table"; + cpu-release-addr = <0x1 0x0000fff8>; + }; + cpu@101 { + device_type = "cpu"; + compatible = "apm,potenza", "arm,armv8"; + reg = <0x0 0x101>; + enable-method = "spin-table"; + cpu-release-addr = <0x1 0x0000fff8>; + }; + cpu@200 { + device_type = "cpu"; + compatible = "apm,potenza", "arm,armv8"; + reg = <0x0 0x200>; + enable-method = "spin-table"; + cpu-release-addr = <0x1 0x0000fff8>; + }; + cpu@201 { + device_type = "cpu"; + compatible = "apm,potenza", "arm,armv8"; + reg = <0x0 0x201>; + enable-method = "spin-table"; + cpu-release-addr = <0x1 0x0000fff8>; + }; + cpu@300 { + device_type = "cpu"; + compatible = "apm,potenza", "arm,armv8"; + reg = <0x0 0x300>; + enable-method = "spin-table"; + cpu-release-addr = <0x1 0x0000fff8>; + }; + cpu@301 { + device_type = "cpu"; + compatible = "apm,potenza", "arm,armv8"; + reg = <0x0 0x301>; + enable-method = "spin-table"; + cpu-release-addr = <0x1 0x0000fff8>; + }; + }; + + gic: interrupt-controller@78010000 { + compatible = "arm,cortex-a15-gic"; + #interrupt-cells = <3>; + interrupt-controller; + reg = <0x0 0x78010000 0x0 0x1000>, /* GIC Dist */ + <0x0 0x78020000 0x0 0x1000>, /* GIC CPU */ + <0x0 0x78040000 0x0 0x2000>, /* GIC VCPU Control */ + <0x0 0x78060000 0x0 0x2000>; /* GIC VCPU */ + interrupts = <1 9 0xf04>; /* GIC Maintenence IRQ */ + }; + + timer { + compatible = "arm,armv8-timer"; + interrupts = <1 0 0xff01>, /* Secure Phys IRQ */ + <1 13 0xff01>, /* Non-secure Phys IRQ */ + <1 14 0xff01>, /* Virt IRQ */ + <1 15 0xff01>; /* Hyp IRQ */ + clock-frequency = <50000000>; + }; + + soc { + compatible = "simple-bus"; + #address-cells = <2>; + #size-cells = <2>; + ranges; + dma-ranges = <0x0 0x0 0x0 0x0 0x400 0x0>; + + clocks { + #address-cells = <2>; + #size-cells = <2>; + ranges; + refclk: refclk { + compatible = "fixed-clock"; + #clock-cells = <1>; + clock-frequency = <100000000>; + clock-output-names = "refclk"; + }; + + pcppll: pcppll@17000100 { + compatible = "apm,xgene-pcppll-clock"; + #clock-cells = <1>; + clocks = <&refclk 0>; + clock-names = "pcppll"; + reg = <0x0 0x17000100 0x0 0x1000>; + clock-output-names = "pcppll"; + type = <0>; + }; + + socpll: socpll@17000120 { + compatible = "apm,xgene-socpll-clock"; + #clock-cells = <1>; + clocks = <&refclk 0>; + clock-names = "socpll"; + reg = <0x0 0x17000120 0x0 0x1000>; + clock-output-names = "socpll"; + type = <1>; + }; + + socplldiv2: socplldiv2 { + compatible = "fixed-factor-clock"; + #clock-cells = <1>; + clocks = <&socpll 0>; + clock-names = "socplldiv2"; + clock-mult = <1>; + clock-div = <2>; + clock-output-names = "socplldiv2"; + }; + + qmlclk: qmlclk { + compatible = "apm,xgene-device-clock"; + #clock-cells = <1>; + clocks = <&socplldiv2 0>; + clock-names = "qmlclk"; + reg = <0x0 0x1703C000 0x0 0x1000>; + reg-names = "csr-reg"; + clock-output-names = "qmlclk"; + }; + + ethclk: ethclk { + compatible = "apm,xgene-device-clock"; + #clock-cells = <1>; + clocks = <&socplldiv2 0>; + clock-names = "ethclk"; + reg = <0x0 0x17000000 0x0 0x1000>; + reg-names = "div-reg"; + divider-offset = <0x238>; + divider-width = <0x9>; + divider-shift = <0x0>; + clock-output-names = "ethclk"; + }; + + menetclk: menetclk { + compatible = "apm,xgene-device-clock"; + #clock-cells = <1>; + clocks = <ðclk 0>; + reg = <0x0 0x1702C000 0x0 0x1000>; + reg-names = "csr-reg"; + clock-output-names = "menetclk"; + }; + + sge0clk: sge0clk@1f21c000 { + compatible = "apm,xgene-device-clock"; + #clock-cells = <1>; + clocks = <&socplldiv2 0>; + reg = <0x0 0x1f21c000 0x0 0x1000>; + reg-names = "csr-reg"; + csr-mask = <0x3>; + clock-output-names = "sge0clk"; + }; + + sge1clk: sge1clk@1f21c000 { + compatible = "apm,xgene-device-clock"; + #clock-cells = <1>; + clocks = <&socplldiv2 0>; + reg = <0x0 0x1f21c000 0x0 0x1000>; + reg-names = "csr-reg"; + csr-mask = <0xc>; + clock-output-names = "sge1clk"; + }; + + xge0clk: xge0clk@1f61c000 { + compatible = "apm,xgene-device-clock"; + #clock-cells = <1>; + clocks = <&socplldiv2 0>; + reg = <0x0 0x1f61c000 0x0 0x1000>; + reg-names = "csr-reg"; + csr-mask = <0x3>; + clock-output-names = "xge0clk"; + }; + + sataphy1clk: sataphy1clk@1f21c000 { + compatible = "apm,xgene-device-clock"; + #clock-cells = <1>; + clocks = <&socplldiv2 0>; + reg = <0x0 0x1f21c000 0x0 0x1000>; + reg-names = "csr-reg"; + clock-output-names = "sataphy1clk"; + status = "disabled"; + csr-offset = <0x4>; + csr-mask = <0x00>; + enable-offset = <0x0>; + enable-mask = <0x06>; + }; + + sataphy2clk: sataphy1clk@1f22c000 { + compatible = "apm,xgene-device-clock"; + #clock-cells = <1>; + clocks = <&socplldiv2 0>; + reg = <0x0 0x1f22c000 0x0 0x1000>; + reg-names = "csr-reg"; + clock-output-names = "sataphy2clk"; + status = "ok"; + csr-offset = <0x4>; + csr-mask = <0x3a>; + enable-offset = <0x0>; + enable-mask = <0x06>; + }; + + sataphy3clk: sataphy1clk@1f23c000 { + compatible = "apm,xgene-device-clock"; + #clock-cells = <1>; + clocks = <&socplldiv2 0>; + reg = <0x0 0x1f23c000 0x0 0x1000>; + reg-names = "csr-reg"; + clock-output-names = "sataphy3clk"; + status = "ok"; + csr-offset = <0x4>; + csr-mask = <0x3a>; + enable-offset = <0x0>; + enable-mask = <0x06>; + }; + + sata01clk: sata01clk@1f21c000 { + compatible = "apm,xgene-device-clock"; + #clock-cells = <1>; + clocks = <&socplldiv2 0>; + reg = <0x0 0x1f21c000 0x0 0x1000>; + reg-names = "csr-reg"; + clock-output-names = "sata01clk"; + csr-offset = <0x4>; + csr-mask = <0x05>; + enable-offset = <0x0>; + enable-mask = <0x39>; + }; + + sata23clk: sata23clk@1f22c000 { + compatible = "apm,xgene-device-clock"; + #clock-cells = <1>; + clocks = <&socplldiv2 0>; + reg = <0x0 0x1f22c000 0x0 0x1000>; + reg-names = "csr-reg"; + clock-output-names = "sata23clk"; + csr-offset = <0x4>; + csr-mask = <0x05>; + enable-offset = <0x0>; + enable-mask = <0x39>; + }; + + sata45clk: sata45clk@1f23c000 { + compatible = "apm,xgene-device-clock"; + #clock-cells = <1>; + clocks = <&socplldiv2 0>; + reg = <0x0 0x1f23c000 0x0 0x1000>; + reg-names = "csr-reg"; + clock-output-names = "sata45clk"; + csr-offset = <0x4>; + csr-mask = <0x05>; + enable-offset = <0x0>; + enable-mask = <0x39>; + }; + + rtcclk: rtcclk@17000000 { + compatible = "apm,xgene-device-clock"; + #clock-cells = <1>; + clocks = <&socplldiv2 0>; + reg = <0x0 0x17000000 0x0 0x2000>; + reg-names = "csr-reg"; + csr-offset = <0xc>; + csr-mask = <0x2>; + enable-offset = <0x10>; + enable-mask = <0x2>; + clock-output-names = "rtcclk"; + }; + + rngpkaclk: rngpkaclk@17000000 { + compatible = "apm,xgene-device-clock"; + #clock-cells = <1>; + clocks = <&socplldiv2 0>; + reg = <0x0 0x17000000 0x0 0x2000>; + reg-names = "csr-reg"; + csr-offset = <0xc>; + csr-mask = <0x10>; + enable-offset = <0x10>; + enable-mask = <0x10>; + clock-output-names = "rngpkaclk"; + }; + + pcie0clk: pcie0clk@1f2bc000 { + status = "disabled"; + compatible = "apm,xgene-device-clock"; + #clock-cells = <1>; + clocks = <&socplldiv2 0>; + reg = <0x0 0x1f2bc000 0x0 0x1000>; + reg-names = "csr-reg"; + clock-output-names = "pcie0clk"; + }; + + pcie1clk: pcie1clk@1f2cc000 { + status = "disabled"; + compatible = "apm,xgene-device-clock"; + #clock-cells = <1>; + clocks = <&socplldiv2 0>; + reg = <0x0 0x1f2cc000 0x0 0x1000>; + reg-names = "csr-reg"; + clock-output-names = "pcie1clk"; + }; + + pcie2clk: pcie2clk@1f2dc000 { + status = "disabled"; + compatible = "apm,xgene-device-clock"; + #clock-cells = <1>; + clocks = <&socplldiv2 0>; + reg = <0x0 0x1f2dc000 0x0 0x1000>; + reg-names = "csr-reg"; + clock-output-names = "pcie2clk"; + }; + + pcie3clk: pcie3clk@1f50c000 { + status = "disabled"; + compatible = "apm,xgene-device-clock"; + #clock-cells = <1>; + clocks = <&socplldiv2 0>; + reg = <0x0 0x1f50c000 0x0 0x1000>; + reg-names = "csr-reg"; + clock-output-names = "pcie3clk"; + }; + + pcie4clk: pcie4clk@1f51c000 { + status = "disabled"; + compatible = "apm,xgene-device-clock"; + #clock-cells = <1>; + clocks = <&socplldiv2 0>; + reg = <0x0 0x1f51c000 0x0 0x1000>; + reg-names = "csr-reg"; + clock-output-names = "pcie4clk"; + }; + + dmaclk: dmaclk@1f27c000 { + compatible = "apm,xgene-device-clock"; + #clock-cells = <1>; + clocks = <&socplldiv2 0>; + reg = <0x0 0x1f27c000 0x0 0x1000>; + reg-names = "csr-reg"; + clock-output-names = "dmaclk"; + }; + }; + + pcie0: pcie@1f2b0000 { + status = "disabled"; + device_type = "pci"; + compatible = "apm,xgene-storm-pcie", "apm,xgene-pcie"; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + reg = < 0x00 0x1f2b0000 0x0 0x00010000 /* Controller registers */ + 0xe0 0xd0000000 0x0 0x00040000>; /* PCI config space */ + reg-names = "csr", "cfg"; + ranges = <0x01000000 0x00 0x00000000 0xe0 0x10000000 0x00 0x00010000 /* io */ + 0x02000000 0x00 0x80000000 0xe1 0x80000000 0x00 0x80000000>; /* mem */ + dma-ranges = <0x42000000 0x80 0x00000000 0x80 0x00000000 0x00 0x80000000 + 0x42000000 0x00 0x00000000 0x00 0x00000000 0x80 0x00000000>; + interrupt-map-mask = <0x0 0x0 0x0 0x7>; + interrupt-map = <0x0 0x0 0x0 0x1 &gic 0x0 0xc2 0x1 + 0x0 0x0 0x0 0x2 &gic 0x0 0xc3 0x1 + 0x0 0x0 0x0 0x3 &gic 0x0 0xc4 0x1 + 0x0 0x0 0x0 0x4 &gic 0x0 0xc5 0x1>; + dma-coherent; + clocks = <&pcie0clk 0>; + }; + + pcie1: pcie@1f2c0000 { + status = "disabled"; + device_type = "pci"; + compatible = "apm,xgene-storm-pcie", "apm,xgene-pcie"; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + reg = < 0x00 0x1f2c0000 0x0 0x00010000 /* Controller registers */ + 0xd0 0xd0000000 0x0 0x00040000>; /* PCI config space */ + reg-names = "csr", "cfg"; + ranges = <0x01000000 0x0 0x00000000 0xd0 0x10000000 0x00 0x00010000 /* io */ + 0x02000000 0x0 0x80000000 0xd1 0x80000000 0x00 0x80000000>; /* mem */ + dma-ranges = <0x42000000 0x80 0x00000000 0x80 0x00000000 0x00 0x80000000 + 0x42000000 0x00 0x00000000 0x00 0x00000000 0x80 0x00000000>; + interrupt-map-mask = <0x0 0x0 0x0 0x7>; + interrupt-map = <0x0 0x0 0x0 0x1 &gic 0x0 0xc8 0x1 + 0x0 0x0 0x0 0x2 &gic 0x0 0xc9 0x1 + 0x0 0x0 0x0 0x3 &gic 0x0 0xca 0x1 + 0x0 0x0 0x0 0x4 &gic 0x0 0xcb 0x1>; + dma-coherent; + clocks = <&pcie1clk 0>; + }; + + pcie2: pcie@1f2d0000 { + status = "disabled"; + device_type = "pci"; + compatible = "apm,xgene-storm-pcie", "apm,xgene-pcie"; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + reg = < 0x00 0x1f2d0000 0x0 0x00010000 /* Controller registers */ + 0x90 0xd0000000 0x0 0x00040000>; /* PCI config space */ + reg-names = "csr", "cfg"; + ranges = <0x01000000 0x0 0x00000000 0x90 0x10000000 0x0 0x00010000 /* io */ + 0x02000000 0x0 0x80000000 0x91 0x80000000 0x0 0x80000000>; /* mem */ + dma-ranges = <0x42000000 0x80 0x00000000 0x80 0x00000000 0x00 0x80000000 + 0x42000000 0x00 0x00000000 0x00 0x00000000 0x80 0x00000000>; + interrupt-map-mask = <0x0 0x0 0x0 0x7>; + interrupt-map = <0x0 0x0 0x0 0x1 &gic 0x0 0xce 0x1 + 0x0 0x0 0x0 0x2 &gic 0x0 0xcf 0x1 + 0x0 0x0 0x0 0x3 &gic 0x0 0xd0 0x1 + 0x0 0x0 0x0 0x4 &gic 0x0 0xd1 0x1>; + dma-coherent; + clocks = <&pcie2clk 0>; + }; + + pcie3: pcie@1f500000 { + status = "disabled"; + device_type = "pci"; + compatible = "apm,xgene-storm-pcie", "apm,xgene-pcie"; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + reg = < 0x00 0x1f500000 0x0 0x00010000 /* Controller registers */ + 0xa0 0xd0000000 0x0 0x00040000>; /* PCI config space */ + reg-names = "csr", "cfg"; + ranges = <0x01000000 0x0 0x00000000 0xa0 0x10000000 0x0 0x00010000 /* io */ + 0x02000000 0x0 0x80000000 0xa1 0x80000000 0x0 0x80000000>; /* mem */ + dma-ranges = <0x42000000 0x80 0x00000000 0x80 0x00000000 0x00 0x80000000 + 0x42000000 0x00 0x00000000 0x00 0x00000000 0x80 0x00000000>; + interrupt-map-mask = <0x0 0x0 0x0 0x7>; + interrupt-map = <0x0 0x0 0x0 0x1 &gic 0x0 0xd4 0x1 + 0x0 0x0 0x0 0x2 &gic 0x0 0xd5 0x1 + 0x0 0x0 0x0 0x3 &gic 0x0 0xd6 0x1 + 0x0 0x0 0x0 0x4 &gic 0x0 0xd7 0x1>; + dma-coherent; + clocks = <&pcie3clk 0>; + }; + + pcie4: pcie@1f510000 { + status = "disabled"; + device_type = "pci"; + compatible = "apm,xgene-storm-pcie", "apm,xgene-pcie"; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + reg = < 0x00 0x1f510000 0x0 0x00010000 /* Controller registers */ + 0xc0 0xd0000000 0x0 0x00200000>; /* PCI config space */ + reg-names = "csr", "cfg"; + ranges = <0x01000000 0x0 0x00000000 0xc0 0x10000000 0x0 0x00010000 /* io */ + 0x02000000 0x0 0x80000000 0xc1 0x80000000 0x0 0x80000000>; /* mem */ + dma-ranges = <0x42000000 0x80 0x00000000 0x80 0x00000000 0x00 0x80000000 + 0x42000000 0x00 0x00000000 0x00 0x00000000 0x80 0x00000000>; + interrupt-map-mask = <0x0 0x0 0x0 0x7>; + interrupt-map = <0x0 0x0 0x0 0x1 &gic 0x0 0xda 0x1 + 0x0 0x0 0x0 0x2 &gic 0x0 0xdb 0x1 + 0x0 0x0 0x0 0x3 &gic 0x0 0xdc 0x1 + 0x0 0x0 0x0 0x4 &gic 0x0 0xdd 0x1>; + dma-coherent; + clocks = <&pcie4clk 0>; + }; + + serial0: serial@1c020000 { + status = "disabled"; + device_type = "serial"; + compatible = "ns16550a"; + reg = <0 0x1c020000 0x0 0x1000>; + reg-shift = <2>; + clock-frequency = <10000000>; /* Updated by bootloader */ + interrupt-parent = <&gic>; + interrupts = <0x0 0x4c 0x4>; + }; + + serial1: serial@1c021000 { + status = "disabled"; + device_type = "serial"; + compatible = "ns16550a"; + reg = <0 0x1c021000 0x0 0x1000>; + reg-shift = <2>; + clock-frequency = <10000000>; /* Updated by bootloader */ + interrupt-parent = <&gic>; + interrupts = <0x0 0x4d 0x4>; + }; + + serial2: serial@1c022000 { + status = "disabled"; + device_type = "serial"; + compatible = "ns16550a"; + reg = <0 0x1c022000 0x0 0x1000>; + reg-shift = <2>; + clock-frequency = <10000000>; /* Updated by bootloader */ + interrupt-parent = <&gic>; + interrupts = <0x0 0x4e 0x4>; + }; + + serial3: serial@1c023000 { + status = "disabled"; + device_type = "serial"; + compatible = "ns16550a"; + reg = <0 0x1c023000 0x0 0x1000>; + reg-shift = <2>; + clock-frequency = <10000000>; /* Updated by bootloader */ + interrupt-parent = <&gic>; + interrupts = <0x0 0x4f 0x4>; + }; + + phy1: phy@1f21a000 { + compatible = "apm,xgene-phy"; + reg = <0x0 0x1f21a000 0x0 0x100>; + #phy-cells = <1>; + clocks = <&sataphy1clk 0>; + status = "disabled"; + apm,tx-boost-gain = <30 30 30 30 30 30>; + apm,tx-eye-tuning = <2 10 10 2 10 10>; + }; + + phy2: phy@1f22a000 { + compatible = "apm,xgene-phy"; + reg = <0x0 0x1f22a000 0x0 0x100>; + #phy-cells = <1>; + clocks = <&sataphy2clk 0>; + status = "ok"; + apm,tx-boost-gain = <30 30 30 30 30 30>; + apm,tx-eye-tuning = <1 10 10 2 10 10>; + }; + + phy3: phy@1f23a000 { + compatible = "apm,xgene-phy"; + reg = <0x0 0x1f23a000 0x0 0x100>; + #phy-cells = <1>; + clocks = <&sataphy3clk 0>; + status = "ok"; + apm,tx-boost-gain = <31 31 31 31 31 31>; + apm,tx-eye-tuning = <2 10 10 2 10 10>; + }; + + sata1: sata@1a000000 { + compatible = "apm,xgene-ahci"; + reg = <0x0 0x1a000000 0x0 0x1000>, + <0x0 0x1f210000 0x0 0x1000>, + <0x0 0x1f21d000 0x0 0x1000>, + <0x0 0x1f21e000 0x0 0x1000>, + <0x0 0x1f217000 0x0 0x1000>; + interrupts = <0x0 0x86 0x4>; + dma-coherent; + status = "disabled"; + clocks = <&sata01clk 0>; + phys = <&phy1 0>; + phy-names = "sata-phy"; + }; + + sata2: sata@1a400000 { + compatible = "apm,xgene-ahci"; + reg = <0x0 0x1a400000 0x0 0x1000>, + <0x0 0x1f220000 0x0 0x1000>, + <0x0 0x1f22d000 0x0 0x1000>, + <0x0 0x1f22e000 0x0 0x1000>, + <0x0 0x1f227000 0x0 0x1000>; + interrupts = <0x0 0x87 0x4>; + dma-coherent; + status = "ok"; + clocks = <&sata23clk 0>; + phys = <&phy2 0>; + phy-names = "sata-phy"; + }; + + sata3: sata@1a800000 { + compatible = "apm,xgene-ahci"; + reg = <0x0 0x1a800000 0x0 0x1000>, + <0x0 0x1f230000 0x0 0x1000>, + <0x0 0x1f23d000 0x0 0x1000>, + <0x0 0x1f23e000 0x0 0x1000>; + interrupts = <0x0 0x88 0x4>; + dma-coherent; + status = "ok"; + clocks = <&sata45clk 0>; + phys = <&phy3 0>; + phy-names = "sata-phy"; + }; + + rtc: rtc@10510000 { + compatible = "apm,xgene-rtc"; + reg = <0x0 0x10510000 0x0 0x400>; + interrupts = <0x0 0x46 0x4>; + #clock-cells = <1>; + clocks = <&rtcclk 0>; + }; + + menet: ethernet@17020000 { + compatible = "apm,xgene-enet"; + status = "disabled"; + reg = <0x0 0x17020000 0x0 0xd100>, + <0x0 0X17030000 0x0 0Xc300>, + <0x0 0X10000000 0x0 0X200>; + reg-names = "enet_csr", "ring_csr", "ring_cmd"; + interrupts = <0x0 0x3c 0x4>; + dma-coherent; + clocks = <&menetclk 0>; + /* mac address will be overwritten by the bootloader */ + local-mac-address = [00 00 00 00 00 00]; + phy-connection-type = "rgmii"; + phy-handle = <&menetphy>; + mdio { + compatible = "apm,xgene-mdio"; + #address-cells = <1>; + #size-cells = <0>; + menetphy: menetphy@3 { + compatible = "ethernet-phy-id001c.c915"; + reg = <0x3>; + }; + + }; + }; + + sgenet0: ethernet@1f210000 { + compatible = "apm,xgene1-sgenet"; + status = "disabled"; + reg = <0x0 0x1f210000 0x0 0xd100>, + <0x0 0x1f200000 0x0 0Xc300>, + <0x0 0x1B000000 0x0 0X200>; + reg-names = "enet_csr", "ring_csr", "ring_cmd"; + interrupts = <0x0 0xA0 0x4>, + <0x0 0xA1 0x4>; + dma-coherent; + clocks = <&sge0clk 0>; + local-mac-address = [00 00 00 00 00 00]; + phy-connection-type = "sgmii"; + }; + + sgenet1: ethernet@1f210030 { + compatible = "apm,xgene1-sgenet"; + status = "disabled"; + reg = <0x0 0x1f210030 0x0 0xd100>, + <0x0 0x1f200000 0x0 0Xc300>, + <0x0 0x1B000000 0x0 0X8000>; + reg-names = "enet_csr", "ring_csr", "ring_cmd"; + interrupts = <0x0 0xAC 0x4>, + <0x0 0xAD 0x4>; + port-id = <1>; + dma-coherent; + clocks = <&sge1clk 0>; + local-mac-address = [00 00 00 00 00 00]; + phy-connection-type = "sgmii"; + }; + + xgenet: ethernet@1f610000 { + compatible = "apm,xgene1-xgenet"; + status = "disabled"; + reg = <0x0 0x1f610000 0x0 0xd100>, + <0x0 0x1f600000 0x0 0Xc300>, + <0x0 0x18000000 0x0 0X200>; + reg-names = "enet_csr", "ring_csr", "ring_cmd"; + interrupts = <0x0 0x60 0x4>, + <0x0 0x61 0x4>; + dma-coherent; + clocks = <&xge0clk 0>; + /* mac address will be overwritten by the bootloader */ + local-mac-address = [00 00 00 00 00 00]; + phy-connection-type = "xgmii"; + }; + + rng: rng@10520000 { + compatible = "apm,xgene-rng"; + reg = <0x0 0x10520000 0x0 0x100>; + interrupts = <0x0 0x41 0x4>; + clocks = <&rngpkaclk 0>; + }; + + dma: dma@1f270000 { + compatible = "apm,xgene-storm-dma"; + device_type = "dma"; + reg = <0x0 0x1f270000 0x0 0x10000>, + <0x0 0x1f200000 0x0 0x10000>, + <0x0 0x1b008000 0x0 0x2000>, + <0x0 0x1054a000 0x0 0x100>; + interrupts = <0x0 0x82 0x4>, + <0x0 0xb8 0x4>, + <0x0 0xb9 0x4>, + <0x0 0xba 0x4>, + <0x0 0xbb 0x4>; + dma-coherent; + clocks = <&dmaclk 0>; + }; + }; +}; diff --git a/arch/arm64/boot/dts/arm/Makefile b/arch/arm64/boot/dts/arm/Makefile new file mode 100644 index 000000000..301a0dada --- /dev/null +++ b/arch/arm64/boot/dts/arm/Makefile @@ -0,0 +1,7 @@ +dtb-$(CONFIG_ARCH_VEXPRESS) += foundation-v8.dtb +dtb-$(CONFIG_ARCH_VEXPRESS) += juno.dtb +dtb-$(CONFIG_ARCH_VEXPRESS) += rtsm_ve-aemv8a.dtb + +always := $(dtb-y) +subdir-y := $(dts-dirs) +clean-files := *.dtb diff --git a/arch/arm64/boot/dts/arm/foundation-v8.dts b/arch/arm64/boot/dts/arm/foundation-v8.dts new file mode 100644 index 000000000..4eac8dcea --- /dev/null +++ b/arch/arm64/boot/dts/arm/foundation-v8.dts @@ -0,0 +1,240 @@ +/* + * ARM Ltd. + * + * ARMv8 Foundation model DTS + */ + +/dts-v1/; + +/memreserve/ 0x80000000 0x00010000; + +/ { + model = "Foundation-v8A"; + compatible = "arm,foundation-aarch64", "arm,vexpress"; + interrupt-parent = <&gic>; + #address-cells = <2>; + #size-cells = <2>; + + chosen { }; + + aliases { + serial0 = &v2m_serial0; + serial1 = &v2m_serial1; + serial2 = &v2m_serial2; + serial3 = &v2m_serial3; + }; + + cpus { + #address-cells = <2>; + #size-cells = <0>; + + cpu@0 { + device_type = "cpu"; + compatible = "arm,armv8"; + reg = <0x0 0x0>; + enable-method = "spin-table"; + cpu-release-addr = <0x0 0x8000fff8>; + next-level-cache = <&L2_0>; + }; + cpu@1 { + device_type = "cpu"; + compatible = "arm,armv8"; + reg = <0x0 0x1>; + enable-method = "spin-table"; + cpu-release-addr = <0x0 0x8000fff8>; + next-level-cache = <&L2_0>; + }; + cpu@2 { + device_type = "cpu"; + compatible = "arm,armv8"; + reg = <0x0 0x2>; + enable-method = "spin-table"; + cpu-release-addr = <0x0 0x8000fff8>; + next-level-cache = <&L2_0>; + }; + cpu@3 { + device_type = "cpu"; + compatible = "arm,armv8"; + reg = <0x0 0x3>; + enable-method = "spin-table"; + cpu-release-addr = <0x0 0x8000fff8>; + next-level-cache = <&L2_0>; + }; + + L2_0: l2-cache0 { + compatible = "cache"; + }; + }; + + memory@80000000 { + device_type = "memory"; + reg = <0x00000000 0x80000000 0 0x80000000>, + <0x00000008 0x80000000 0 0x80000000>; + }; + + gic: interrupt-controller@2c001000 { + compatible = "arm,cortex-a15-gic", "arm,cortex-a9-gic"; + #interrupt-cells = <3>; + #address-cells = <0>; + interrupt-controller; + reg = <0x0 0x2c001000 0 0x1000>, + <0x0 0x2c002000 0 0x1000>, + <0x0 0x2c004000 0 0x2000>, + <0x0 0x2c006000 0 0x2000>; + interrupts = <1 9 0xf04>; + }; + + timer { + compatible = "arm,armv8-timer"; + interrupts = <1 13 0xf08>, + <1 14 0xf08>, + <1 11 0xf08>, + <1 10 0xf08>; + clock-frequency = <100000000>; + }; + + pmu { + compatible = "arm,armv8-pmuv3"; + interrupts = <0 60 4>, + <0 61 4>, + <0 62 4>, + <0 63 4>; + }; + + smb { + compatible = "arm,vexpress,v2m-p1", "simple-bus"; + arm,v2m-memory-map = "rs1"; + #address-cells = <2>; /* SMB chipselect number and offset */ + #size-cells = <1>; + + ranges = <0 0 0 0x08000000 0x04000000>, + <1 0 0 0x14000000 0x04000000>, + <2 0 0 0x18000000 0x04000000>, + <3 0 0 0x1c000000 0x04000000>, + <4 0 0 0x0c000000 0x04000000>, + <5 0 0 0x10000000 0x04000000>; + + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 63>; + interrupt-map = <0 0 0 &gic 0 0 4>, + <0 0 1 &gic 0 1 4>, + <0 0 2 &gic 0 2 4>, + <0 0 3 &gic 0 3 4>, + <0 0 4 &gic 0 4 4>, + <0 0 5 &gic 0 5 4>, + <0 0 6 &gic 0 6 4>, + <0 0 7 &gic 0 7 4>, + <0 0 8 &gic 0 8 4>, + <0 0 9 &gic 0 9 4>, + <0 0 10 &gic 0 10 4>, + <0 0 11 &gic 0 11 4>, + <0 0 12 &gic 0 12 4>, + <0 0 13 &gic 0 13 4>, + <0 0 14 &gic 0 14 4>, + <0 0 15 &gic 0 15 4>, + <0 0 16 &gic 0 16 4>, + <0 0 17 &gic 0 17 4>, + <0 0 18 &gic 0 18 4>, + <0 0 19 &gic 0 19 4>, + <0 0 20 &gic 0 20 4>, + <0 0 21 &gic 0 21 4>, + <0 0 22 &gic 0 22 4>, + <0 0 23 &gic 0 23 4>, + <0 0 24 &gic 0 24 4>, + <0 0 25 &gic 0 25 4>, + <0 0 26 &gic 0 26 4>, + <0 0 27 &gic 0 27 4>, + <0 0 28 &gic 0 28 4>, + <0 0 29 &gic 0 29 4>, + <0 0 30 &gic 0 30 4>, + <0 0 31 &gic 0 31 4>, + <0 0 32 &gic 0 32 4>, + <0 0 33 &gic 0 33 4>, + <0 0 34 &gic 0 34 4>, + <0 0 35 &gic 0 35 4>, + <0 0 36 &gic 0 36 4>, + <0 0 37 &gic 0 37 4>, + <0 0 38 &gic 0 38 4>, + <0 0 39 &gic 0 39 4>, + <0 0 40 &gic 0 40 4>, + <0 0 41 &gic 0 41 4>, + <0 0 42 &gic 0 42 4>; + + ethernet@2,02000000 { + compatible = "smsc,lan91c111"; + reg = <2 0x02000000 0x10000>; + interrupts = <15>; + }; + + v2m_clk24mhz: clk24mhz { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <24000000>; + clock-output-names = "v2m:clk24mhz"; + }; + + v2m_refclk1mhz: refclk1mhz { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <1000000>; + clock-output-names = "v2m:refclk1mhz"; + }; + + v2m_refclk32khz: refclk32khz { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <32768>; + clock-output-names = "v2m:refclk32khz"; + }; + + iofpga@3,00000000 { + compatible = "arm,amba-bus", "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 3 0 0x200000>; + + v2m_sysreg: sysreg@010000 { + compatible = "arm,vexpress-sysreg"; + reg = <0x010000 0x1000>; + }; + + v2m_serial0: uart@090000 { + compatible = "arm,pl011", "arm,primecell"; + reg = <0x090000 0x1000>; + interrupts = <5>; + clocks = <&v2m_clk24mhz>, <&v2m_clk24mhz>; + clock-names = "uartclk", "apb_pclk"; + }; + + v2m_serial1: uart@0a0000 { + compatible = "arm,pl011", "arm,primecell"; + reg = <0x0a0000 0x1000>; + interrupts = <6>; + clocks = <&v2m_clk24mhz>, <&v2m_clk24mhz>; + clock-names = "uartclk", "apb_pclk"; + }; + + v2m_serial2: uart@0b0000 { + compatible = "arm,pl011", "arm,primecell"; + reg = <0x0b0000 0x1000>; + interrupts = <7>; + clocks = <&v2m_clk24mhz>, <&v2m_clk24mhz>; + clock-names = "uartclk", "apb_pclk"; + }; + + v2m_serial3: uart@0c0000 { + compatible = "arm,pl011", "arm,primecell"; + reg = <0x0c0000 0x1000>; + interrupts = <8>; + clocks = <&v2m_clk24mhz>, <&v2m_clk24mhz>; + clock-names = "uartclk", "apb_pclk"; + }; + + virtio_block@0130000 { + compatible = "virtio,mmio"; + reg = <0x130000 0x200>; + interrupts = <42>; + }; + }; + }; +}; diff --git a/arch/arm64/boot/dts/arm/juno-clocks.dtsi b/arch/arm64/boot/dts/arm/juno-clocks.dtsi new file mode 100644 index 000000000..c9b89efe0 --- /dev/null +++ b/arch/arm64/boot/dts/arm/juno-clocks.dtsi @@ -0,0 +1,44 @@ +/* + * ARM Juno Platform clocks + * + * Copyright (c) 2013-2014 ARM Ltd + * + * This file is licensed under a dual GPLv2 or BSD license. + * + */ + + /* SoC fixed clocks */ + soc_uartclk: refclk7273800hz { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <7273800>; + clock-output-names = "juno:uartclk"; + }; + + soc_usb48mhz: clk48mhz { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <48000000>; + clock-output-names = "clk48mhz"; + }; + + soc_smc50mhz: clk50mhz { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <50000000>; + clock-output-names = "smc_clk"; + }; + + soc_refclk100mhz: refclk100mhz { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <100000000>; + clock-output-names = "apb_pclk"; + }; + + soc_faxiclk: refclk533mhz { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <533000000>; + clock-output-names = "faxi_clk"; + }; diff --git a/arch/arm64/boot/dts/arm/juno-motherboard.dtsi b/arch/arm64/boot/dts/arm/juno-motherboard.dtsi new file mode 100644 index 000000000..351c95bda --- /dev/null +++ b/arch/arm64/boot/dts/arm/juno-motherboard.dtsi @@ -0,0 +1,152 @@ +/* + * ARM Juno Platform motherboard peripherals + * + * Copyright (c) 2013-2014 ARM Ltd + * + * This file is licensed under a dual GPLv2 or BSD license. + * + */ + + mb_clk24mhz: clk24mhz { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <24000000>; + clock-output-names = "juno_mb:clk24mhz"; + }; + + mb_clk25mhz: clk25mhz { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <25000000>; + clock-output-names = "juno_mb:clk25mhz"; + }; + + v2m_refclk1mhz: refclk1mhz { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <1000000>; + clock-output-names = "juno_mb:refclk1mhz"; + }; + + v2m_refclk32khz: refclk32khz { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <32768>; + clock-output-names = "juno_mb:refclk32khz"; + }; + + motherboard { + compatible = "arm,vexpress,v2p-p1", "simple-bus"; + #address-cells = <2>; /* SMB chipselect number and offset */ + #size-cells = <1>; + #interrupt-cells = <1>; + ranges; + model = "V2M-Juno"; + arm,hbi = <0x252>; + arm,vexpress,site = <0>; + arm,v2m-memory-map = "rs1"; + + mb_fixed_3v3: fixedregulator@0 { + compatible = "regulator-fixed"; + regulator-name = "MCC_SB_3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + ethernet@2,00000000 { + compatible = "smsc,lan9118", "smsc,lan9115"; + reg = <2 0x00000000 0x10000>; + interrupts = <3>; + phy-mode = "mii"; + reg-io-width = <4>; + smsc,irq-active-high; + smsc,irq-push-pull; + clocks = <&mb_clk25mhz>; + vdd33a-supply = <&mb_fixed_3v3>; + vddvario-supply = <&mb_fixed_3v3>; + }; + + usb@5,00000000 { + compatible = "nxp,usb-isp1763"; + reg = <5 0x00000000 0x20000>; + bus-width = <16>; + interrupts = <4>; + }; + + iofpga@3,00000000 { + compatible = "arm,amba-bus", "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 3 0 0x200000>; + + v2m_sysctl: sysctl@020000 { + compatible = "arm,sp810", "arm,primecell"; + reg = <0x020000 0x1000>; + clocks = <&v2m_refclk32khz>, <&v2m_refclk1mhz>, <&mb_clk24mhz>; + clock-names = "refclk", "timclk", "apb_pclk"; + #clock-cells = <1>; + clock-output-names = "timerclken0", "timerclken1", "timerclken2", "timerclken3"; + }; + + mmci@050000 { + compatible = "arm,pl180", "arm,primecell"; + reg = <0x050000 0x1000>; + interrupts = <5>; + /* cd-gpios = <&v2m_mmc_gpios 0 0>; + wp-gpios = <&v2m_mmc_gpios 1 0>; */ + max-frequency = <12000000>; + vmmc-supply = <&mb_fixed_3v3>; + clocks = <&mb_clk24mhz>, <&soc_smc50mhz>; + clock-names = "mclk", "apb_pclk"; + }; + + kmi@060000 { + compatible = "arm,pl050", "arm,primecell"; + reg = <0x060000 0x1000>; + interrupts = <8>; + clocks = <&mb_clk24mhz>, <&soc_smc50mhz>; + clock-names = "KMIREFCLK", "apb_pclk"; + }; + + kmi@070000 { + compatible = "arm,pl050", "arm,primecell"; + reg = <0x070000 0x1000>; + interrupts = <8>; + clocks = <&mb_clk24mhz>, <&soc_smc50mhz>; + clock-names = "KMIREFCLK", "apb_pclk"; + }; + + wdt@0f0000 { + compatible = "arm,sp805", "arm,primecell"; + reg = <0x0f0000 0x10000>; + interrupts = <7>; + clocks = <&mb_clk24mhz>, <&soc_smc50mhz>; + clock-names = "wdogclk", "apb_pclk"; + }; + + v2m_timer01: timer@110000 { + compatible = "arm,sp804", "arm,primecell"; + reg = <0x110000 0x10000>; + interrupts = <9>; + clocks = <&v2m_sysctl 0>, <&v2m_sysctl 1>, <&mb_clk24mhz>; + clock-names = "timclken1", "timclken2", "apb_pclk"; + }; + + v2m_timer23: timer@120000 { + compatible = "arm,sp804", "arm,primecell"; + reg = <0x120000 0x10000>; + interrupts = <9>; + clocks = <&v2m_sysctl 2>, <&v2m_sysctl 3>, <&mb_clk24mhz>; + clock-names = "timclken1", "timclken2", "apb_pclk"; + }; + + rtc@170000 { + compatible = "arm,pl031", "arm,primecell"; + reg = <0x170000 0x10000>; + interrupts = <0>; + clocks = <&soc_smc50mhz>; + clock-names = "apb_pclk"; + }; + }; + }; diff --git a/arch/arm64/boot/dts/arm/juno.dts b/arch/arm64/boot/dts/arm/juno.dts new file mode 100644 index 000000000..5e9110a33 --- /dev/null +++ b/arch/arm64/boot/dts/arm/juno.dts @@ -0,0 +1,238 @@ +/* + * ARM Ltd. Juno Platform + * + * Copyright (c) 2013-2014 ARM Ltd. + * + * This file is licensed under a dual GPLv2 or BSD license. + */ + +/dts-v1/; + +#include <dt-bindings/interrupt-controller/arm-gic.h> + +/ { + model = "ARM Juno development board (r0)"; + compatible = "arm,juno", "arm,vexpress"; + interrupt-parent = <&gic>; + #address-cells = <2>; + #size-cells = <2>; + + aliases { + serial0 = &soc_uart0; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + psci { + compatible = "arm,psci-0.2"; + method = "smc"; + }; + + cpus { + #address-cells = <2>; + #size-cells = <0>; + + A57_0: cpu@0 { + compatible = "arm,cortex-a57","arm,armv8"; + reg = <0x0 0x0>; + device_type = "cpu"; + enable-method = "psci"; + next-level-cache = <&A57_L2>; + }; + + A57_1: cpu@1 { + compatible = "arm,cortex-a57","arm,armv8"; + reg = <0x0 0x1>; + device_type = "cpu"; + enable-method = "psci"; + next-level-cache = <&A57_L2>; + }; + + A53_0: cpu@100 { + compatible = "arm,cortex-a53","arm,armv8"; + reg = <0x0 0x100>; + device_type = "cpu"; + enable-method = "psci"; + next-level-cache = <&A53_L2>; + }; + + A53_1: cpu@101 { + compatible = "arm,cortex-a53","arm,armv8"; + reg = <0x0 0x101>; + device_type = "cpu"; + enable-method = "psci"; + next-level-cache = <&A53_L2>; + }; + + A53_2: cpu@102 { + compatible = "arm,cortex-a53","arm,armv8"; + reg = <0x0 0x102>; + device_type = "cpu"; + enable-method = "psci"; + next-level-cache = <&A53_L2>; + }; + + A53_3: cpu@103 { + compatible = "arm,cortex-a53","arm,armv8"; + reg = <0x0 0x103>; + device_type = "cpu"; + enable-method = "psci"; + next-level-cache = <&A53_L2>; + }; + + A57_L2: l2-cache0 { + compatible = "cache"; + }; + + A53_L2: l2-cache1 { + compatible = "cache"; + }; + }; + + memory@80000000 { + device_type = "memory"; + /* last 16MB of the first memory area is reserved for secure world use by firmware */ + reg = <0x00000000 0x80000000 0x0 0x7f000000>, + <0x00000008 0x80000000 0x1 0x80000000>; + }; + + gic: interrupt-controller@2c001000 { + compatible = "arm,gic-400", "arm,cortex-a15-gic"; + reg = <0x0 0x2c010000 0 0x1000>, + <0x0 0x2c02f000 0 0x2000>, + <0x0 0x2c04f000 0 0x2000>, + <0x0 0x2c06f000 0 0x2000>; + #address-cells = <0>; + #interrupt-cells = <3>; + interrupt-controller; + interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_HIGH)>; + }; + + timer { + compatible = "arm,armv8-timer"; + interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>; + }; + + pmu { + compatible = "arm,armv8-pmuv3"; + interrupts = <GIC_SPI 02 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 06 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>; + interrupt-affinity = <&A57_0>, + <&A57_1>, + <&A53_0>, + <&A53_1>, + <&A53_2>, + <&A53_3>; + }; + + /include/ "juno-clocks.dtsi" + + dma@7ff00000 { + compatible = "arm,pl330", "arm,primecell"; + reg = <0x0 0x7ff00000 0 0x1000>; + #dma-cells = <1>; + #dma-channels = <8>; + #dma-requests = <32>; + interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&soc_faxiclk>; + clock-names = "apb_pclk"; + }; + + soc_uart0: uart@7ff80000 { + compatible = "arm,pl011", "arm,primecell"; + reg = <0x0 0x7ff80000 0x0 0x1000>; + interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&soc_uartclk>, <&soc_refclk100mhz>; + clock-names = "uartclk", "apb_pclk"; + }; + + i2c@7ffa0000 { + compatible = "snps,designware-i2c"; + reg = <0x0 0x7ffa0000 0x0 0x1000>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>; + clock-frequency = <400000>; + i2c-sda-hold-time-ns = <500>; + clocks = <&soc_smc50mhz>; + + dvi0: dvi-transmitter@70 { + compatible = "nxp,tda998x"; + reg = <0x70>; + }; + + dvi1: dvi-transmitter@71 { + compatible = "nxp,tda998x"; + reg = <0x71>; + }; + }; + + ohci@7ffb0000 { + compatible = "generic-ohci"; + reg = <0x0 0x7ffb0000 0x0 0x10000>; + interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&soc_usb48mhz>; + }; + + ehci@7ffc0000 { + compatible = "generic-ehci"; + reg = <0x0 0x7ffc0000 0x0 0x10000>; + interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&soc_usb48mhz>; + }; + + memory-controller@7ffd0000 { + compatible = "arm,pl354", "arm,primecell"; + reg = <0 0x7ffd0000 0 0x1000>; + interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&soc_smc50mhz>; + clock-names = "apb_pclk"; + }; + + smb { + compatible = "simple-bus"; + #address-cells = <2>; + #size-cells = <1>; + ranges = <0 0 0 0x08000000 0x04000000>, + <1 0 0 0x14000000 0x04000000>, + <2 0 0 0x18000000 0x04000000>, + <3 0 0 0x1c000000 0x04000000>, + <4 0 0 0x0c000000 0x04000000>, + <5 0 0 0x10000000 0x04000000>; + + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 15>; + interrupt-map = <0 0 0 &gic 0 68 IRQ_TYPE_LEVEL_HIGH>, + <0 0 1 &gic 0 69 IRQ_TYPE_LEVEL_HIGH>, + <0 0 2 &gic 0 70 IRQ_TYPE_LEVEL_HIGH>, + <0 0 3 &gic 0 160 IRQ_TYPE_LEVEL_HIGH>, + <0 0 4 &gic 0 161 IRQ_TYPE_LEVEL_HIGH>, + <0 0 5 &gic 0 162 IRQ_TYPE_LEVEL_HIGH>, + <0 0 6 &gic 0 163 IRQ_TYPE_LEVEL_HIGH>, + <0 0 7 &gic 0 164 IRQ_TYPE_LEVEL_HIGH>, + <0 0 8 &gic 0 165 IRQ_TYPE_LEVEL_HIGH>, + <0 0 9 &gic 0 166 IRQ_TYPE_LEVEL_HIGH>, + <0 0 10 &gic 0 167 IRQ_TYPE_LEVEL_HIGH>, + <0 0 11 &gic 0 168 IRQ_TYPE_LEVEL_HIGH>, + <0 0 12 &gic 0 169 IRQ_TYPE_LEVEL_HIGH>; + + /include/ "juno-motherboard.dtsi" + }; +}; diff --git a/arch/arm64/boot/dts/arm/rtsm_ve-aemv8a.dts b/arch/arm64/boot/dts/arm/rtsm_ve-aemv8a.dts new file mode 100644 index 000000000..20addabbd --- /dev/null +++ b/arch/arm64/boot/dts/arm/rtsm_ve-aemv8a.dts @@ -0,0 +1,167 @@ +/* + * ARM Ltd. Fast Models + * + * Architecture Envelope Model (AEM) ARMv8-A + * ARMAEMv8AMPCT + * + * RTSM_VE_AEMv8A.lisa + */ + +/dts-v1/; + +/memreserve/ 0x80000000 0x00010000; + +/ { + model = "RTSM_VE_AEMv8A"; + compatible = "arm,rtsm_ve,aemv8a", "arm,vexpress"; + interrupt-parent = <&gic>; + #address-cells = <2>; + #size-cells = <2>; + + chosen { }; + + aliases { + serial0 = &v2m_serial0; + serial1 = &v2m_serial1; + serial2 = &v2m_serial2; + serial3 = &v2m_serial3; + }; + + cpus { + #address-cells = <2>; + #size-cells = <0>; + + cpu@0 { + device_type = "cpu"; + compatible = "arm,armv8"; + reg = <0x0 0x0>; + enable-method = "spin-table"; + cpu-release-addr = <0x0 0x8000fff8>; + next-level-cache = <&L2_0>; + }; + cpu@1 { + device_type = "cpu"; + compatible = "arm,armv8"; + reg = <0x0 0x1>; + enable-method = "spin-table"; + cpu-release-addr = <0x0 0x8000fff8>; + next-level-cache = <&L2_0>; + }; + cpu@2 { + device_type = "cpu"; + compatible = "arm,armv8"; + reg = <0x0 0x2>; + enable-method = "spin-table"; + cpu-release-addr = <0x0 0x8000fff8>; + next-level-cache = <&L2_0>; + }; + cpu@3 { + device_type = "cpu"; + compatible = "arm,armv8"; + reg = <0x0 0x3>; + enable-method = "spin-table"; + cpu-release-addr = <0x0 0x8000fff8>; + next-level-cache = <&L2_0>; + }; + + L2_0: l2-cache0 { + compatible = "cache"; + }; + }; + + memory@80000000 { + device_type = "memory"; + reg = <0x00000000 0x80000000 0 0x80000000>, + <0x00000008 0x80000000 0 0x80000000>; + }; + + gic: interrupt-controller@2c001000 { + compatible = "arm,cortex-a15-gic", "arm,cortex-a9-gic"; + #interrupt-cells = <3>; + #address-cells = <0>; + interrupt-controller; + reg = <0x0 0x2c001000 0 0x1000>, + <0x0 0x2c002000 0 0x1000>, + <0x0 0x2c004000 0 0x2000>, + <0x0 0x2c006000 0 0x2000>; + interrupts = <1 9 0xf04>; + }; + + timer { + compatible = "arm,armv8-timer"; + interrupts = <1 13 0xf08>, + <1 14 0xf08>, + <1 11 0xf08>, + <1 10 0xf08>; + clock-frequency = <100000000>; + }; + + pmu { + compatible = "arm,armv8-pmuv3"; + interrupts = <0 60 4>, + <0 61 4>, + <0 62 4>, + <0 63 4>; + }; + + smb { + compatible = "simple-bus"; + + #address-cells = <2>; + #size-cells = <1>; + ranges = <0 0 0 0x08000000 0x04000000>, + <1 0 0 0x14000000 0x04000000>, + <2 0 0 0x18000000 0x04000000>, + <3 0 0 0x1c000000 0x04000000>, + <4 0 0 0x0c000000 0x04000000>, + <5 0 0 0x10000000 0x04000000>; + + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 63>; + interrupt-map = <0 0 0 &gic 0 0 4>, + <0 0 1 &gic 0 1 4>, + <0 0 2 &gic 0 2 4>, + <0 0 3 &gic 0 3 4>, + <0 0 4 &gic 0 4 4>, + <0 0 5 &gic 0 5 4>, + <0 0 6 &gic 0 6 4>, + <0 0 7 &gic 0 7 4>, + <0 0 8 &gic 0 8 4>, + <0 0 9 &gic 0 9 4>, + <0 0 10 &gic 0 10 4>, + <0 0 11 &gic 0 11 4>, + <0 0 12 &gic 0 12 4>, + <0 0 13 &gic 0 13 4>, + <0 0 14 &gic 0 14 4>, + <0 0 15 &gic 0 15 4>, + <0 0 16 &gic 0 16 4>, + <0 0 17 &gic 0 17 4>, + <0 0 18 &gic 0 18 4>, + <0 0 19 &gic 0 19 4>, + <0 0 20 &gic 0 20 4>, + <0 0 21 &gic 0 21 4>, + <0 0 22 &gic 0 22 4>, + <0 0 23 &gic 0 23 4>, + <0 0 24 &gic 0 24 4>, + <0 0 25 &gic 0 25 4>, + <0 0 26 &gic 0 26 4>, + <0 0 27 &gic 0 27 4>, + <0 0 28 &gic 0 28 4>, + <0 0 29 &gic 0 29 4>, + <0 0 30 &gic 0 30 4>, + <0 0 31 &gic 0 31 4>, + <0 0 32 &gic 0 32 4>, + <0 0 33 &gic 0 33 4>, + <0 0 34 &gic 0 34 4>, + <0 0 35 &gic 0 35 4>, + <0 0 36 &gic 0 36 4>, + <0 0 37 &gic 0 37 4>, + <0 0 38 &gic 0 38 4>, + <0 0 39 &gic 0 39 4>, + <0 0 40 &gic 0 40 4>, + <0 0 41 &gic 0 41 4>, + <0 0 42 &gic 0 42 4>; + + /include/ "rtsm_ve-motherboard.dtsi" + }; +}; diff --git a/arch/arm64/boot/dts/arm/rtsm_ve-motherboard.dtsi b/arch/arm64/boot/dts/arm/rtsm_ve-motherboard.dtsi new file mode 100644 index 000000000..c46cbb29f --- /dev/null +++ b/arch/arm64/boot/dts/arm/rtsm_ve-motherboard.dtsi @@ -0,0 +1,273 @@ +/* + * ARM Ltd. Fast Models + * + * Versatile Express (VE) system model + * Motherboard component + * + * VEMotherBoard.lisa + */ + + motherboard { + arm,v2m-memory-map = "rs1"; + compatible = "arm,vexpress,v2m-p1", "simple-bus"; + #address-cells = <2>; /* SMB chipselect number and offset */ + #size-cells = <1>; + #interrupt-cells = <1>; + ranges; + + flash@0,00000000 { + compatible = "arm,vexpress-flash", "cfi-flash"; + reg = <0 0x00000000 0x04000000>, + <4 0x00000000 0x04000000>; + bank-width = <4>; + }; + + v2m_video_ram: vram@2,00000000 { + compatible = "arm,vexpress-vram"; + reg = <2 0x00000000 0x00800000>; + }; + + ethernet@2,02000000 { + compatible = "smsc,lan91c111"; + reg = <2 0x02000000 0x10000>; + interrupts = <15>; + }; + + v2m_clk24mhz: clk24mhz { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <24000000>; + clock-output-names = "v2m:clk24mhz"; + }; + + v2m_refclk1mhz: refclk1mhz { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <1000000>; + clock-output-names = "v2m:refclk1mhz"; + }; + + v2m_refclk32khz: refclk32khz { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <32768>; + clock-output-names = "v2m:refclk32khz"; + }; + + iofpga@3,00000000 { + compatible = "arm,amba-bus", "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 3 0 0x200000>; + + v2m_sysreg: sysreg@010000 { + compatible = "arm,vexpress-sysreg"; + reg = <0x010000 0x1000>; + gpio-controller; + #gpio-cells = <2>; + }; + + v2m_sysctl: sysctl@020000 { + compatible = "arm,sp810", "arm,primecell"; + reg = <0x020000 0x1000>; + clocks = <&v2m_refclk32khz>, <&v2m_refclk1mhz>, <&v2m_clk24mhz>; + clock-names = "refclk", "timclk", "apb_pclk"; + #clock-cells = <1>; + clock-output-names = "timerclken0", "timerclken1", "timerclken2", "timerclken3"; + }; + + aaci@040000 { + compatible = "arm,pl041", "arm,primecell"; + reg = <0x040000 0x1000>; + interrupts = <11>; + clocks = <&v2m_clk24mhz>; + clock-names = "apb_pclk"; + }; + + mmci@050000 { + compatible = "arm,pl180", "arm,primecell"; + reg = <0x050000 0x1000>; + interrupts = <9 10>; + cd-gpios = <&v2m_sysreg 0 0>; + wp-gpios = <&v2m_sysreg 1 0>; + max-frequency = <12000000>; + vmmc-supply = <&v2m_fixed_3v3>; + clocks = <&v2m_clk24mhz>, <&v2m_clk24mhz>; + clock-names = "mclk", "apb_pclk"; + }; + + kmi@060000 { + compatible = "arm,pl050", "arm,primecell"; + reg = <0x060000 0x1000>; + interrupts = <12>; + clocks = <&v2m_clk24mhz>, <&v2m_clk24mhz>; + clock-names = "KMIREFCLK", "apb_pclk"; + }; + + kmi@070000 { + compatible = "arm,pl050", "arm,primecell"; + reg = <0x070000 0x1000>; + interrupts = <13>; + clocks = <&v2m_clk24mhz>, <&v2m_clk24mhz>; + clock-names = "KMIREFCLK", "apb_pclk"; + }; + + v2m_serial0: uart@090000 { + compatible = "arm,pl011", "arm,primecell"; + reg = <0x090000 0x1000>; + interrupts = <5>; + clocks = <&v2m_clk24mhz>, <&v2m_clk24mhz>; + clock-names = "uartclk", "apb_pclk"; + }; + + v2m_serial1: uart@0a0000 { + compatible = "arm,pl011", "arm,primecell"; + reg = <0x0a0000 0x1000>; + interrupts = <6>; + clocks = <&v2m_clk24mhz>, <&v2m_clk24mhz>; + clock-names = "uartclk", "apb_pclk"; + }; + + v2m_serial2: uart@0b0000 { + compatible = "arm,pl011", "arm,primecell"; + reg = <0x0b0000 0x1000>; + interrupts = <7>; + clocks = <&v2m_clk24mhz>, <&v2m_clk24mhz>; + clock-names = "uartclk", "apb_pclk"; + }; + + v2m_serial3: uart@0c0000 { + compatible = "arm,pl011", "arm,primecell"; + reg = <0x0c0000 0x1000>; + interrupts = <8>; + clocks = <&v2m_clk24mhz>, <&v2m_clk24mhz>; + clock-names = "uartclk", "apb_pclk"; + }; + + wdt@0f0000 { + compatible = "arm,sp805", "arm,primecell"; + reg = <0x0f0000 0x1000>; + interrupts = <0>; + clocks = <&v2m_refclk32khz>, <&v2m_clk24mhz>; + clock-names = "wdogclk", "apb_pclk"; + }; + + v2m_timer01: timer@110000 { + compatible = "arm,sp804", "arm,primecell"; + reg = <0x110000 0x1000>; + interrupts = <2>; + clocks = <&v2m_sysctl 0>, <&v2m_sysctl 1>, <&v2m_clk24mhz>; + clock-names = "timclken1", "timclken2", "apb_pclk"; + }; + + v2m_timer23: timer@120000 { + compatible = "arm,sp804", "arm,primecell"; + reg = <0x120000 0x1000>; + interrupts = <3>; + clocks = <&v2m_sysctl 2>, <&v2m_sysctl 3>, <&v2m_clk24mhz>; + clock-names = "timclken1", "timclken2", "apb_pclk"; + }; + + rtc@170000 { + compatible = "arm,pl031", "arm,primecell"; + reg = <0x170000 0x1000>; + interrupts = <4>; + clocks = <&v2m_clk24mhz>; + clock-names = "apb_pclk"; + }; + + clcd@1f0000 { + compatible = "arm,pl111", "arm,primecell"; + reg = <0x1f0000 0x1000>; + interrupt-names = "combined"; + interrupts = <14>; + clocks = <&v2m_oscclk1>, <&v2m_clk24mhz>; + clock-names = "clcdclk", "apb_pclk"; + arm,pl11x,framebuffer = <0x18000000 0x00180000>; + memory-region = <&v2m_video_ram>; + max-memory-bandwidth = <130000000>; /* 16bpp @ 63.5MHz */ + + port { + v2m_clcd_pads: endpoint { + remote-endpoint = <&v2m_clcd_panel>; + arm,pl11x,tft-r0g0b0-pads = <0 8 16>; + }; + }; + + panel { + compatible = "panel-dpi"; + + port { + v2m_clcd_panel: endpoint { + remote-endpoint = <&v2m_clcd_pads>; + }; + }; + + panel-timing { + clock-frequency = <63500127>; + hactive = <1024>; + hback-porch = <152>; + hfront-porch = <48>; + hsync-len = <104>; + vactive = <768>; + vback-porch = <23>; + vfront-porch = <3>; + vsync-len = <4>; + }; + }; + }; + + virtio_block@0130000 { + compatible = "virtio,mmio"; + reg = <0x130000 0x200>; + interrupts = <42>; + }; + }; + + v2m_fixed_3v3: fixedregulator@0 { + compatible = "regulator-fixed"; + regulator-name = "3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + mcc { + compatible = "arm,vexpress,config-bus"; + arm,vexpress,config-bridge = <&v2m_sysreg>; + + v2m_oscclk1: osc@1 { + /* CLCD clock */ + compatible = "arm,vexpress-osc"; + arm,vexpress-sysreg,func = <1 1>; + freq-range = <23750000 63500000>; + #clock-cells = <0>; + clock-output-names = "v2m:oscclk1"; + }; + + reset@0 { + compatible = "arm,vexpress-reset"; + arm,vexpress-sysreg,func = <5 0>; + }; + + muxfpga@0 { + compatible = "arm,vexpress-muxfpga"; + arm,vexpress-sysreg,func = <7 0>; + }; + + shutdown@0 { + compatible = "arm,vexpress-shutdown"; + arm,vexpress-sysreg,func = <8 0>; + }; + + reboot@0 { + compatible = "arm,vexpress-reboot"; + arm,vexpress-sysreg,func = <9 0>; + }; + + dvimode@0 { + compatible = "arm,vexpress-dvimode"; + arm,vexpress-sysreg,func = <11 0>; + }; + }; + }; diff --git a/arch/arm64/boot/dts/cavium/Makefile b/arch/arm64/boot/dts/cavium/Makefile new file mode 100644 index 000000000..e34f89dda --- /dev/null +++ b/arch/arm64/boot/dts/cavium/Makefile @@ -0,0 +1,5 @@ +dtb-$(CONFIG_ARCH_THUNDER) += thunder-88xx.dtb + +always := $(dtb-y) +subdir-y := $(dts-dirs) +clean-files := *.dtb diff --git a/arch/arm64/boot/dts/cavium/thunder-88xx.dts b/arch/arm64/boot/dts/cavium/thunder-88xx.dts new file mode 100644 index 000000000..800ba6599 --- /dev/null +++ b/arch/arm64/boot/dts/cavium/thunder-88xx.dts @@ -0,0 +1,67 @@ +/* + * Cavium Thunder DTS file - Thunder board description + * + * Copyright (C) 2014, Cavium Inc. + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This library is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This library is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public + * License along with this library; if not, write to the Free + * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; + +/include/ "thunder-88xx.dtsi" + +/ { + model = "Cavium ThunderX CN88XX board"; + compatible = "cavium,thunder-88xx"; + + aliases { + serial0 = &uaa0; + serial1 = &uaa1; + }; + + memory@00000000 { + device_type = "memory"; + reg = <0x0 0x00000000 0x0 0x80000000>; + }; +}; diff --git a/arch/arm64/boot/dts/cavium/thunder-88xx.dtsi b/arch/arm64/boot/dts/cavium/thunder-88xx.dtsi new file mode 100644 index 000000000..d8c0bdc51 --- /dev/null +++ b/arch/arm64/boot/dts/cavium/thunder-88xx.dtsi @@ -0,0 +1,401 @@ +/* + * Cavium Thunder DTS file - Thunder SoC description + * + * Copyright (C) 2014, Cavium Inc. + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This library is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This library is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public + * License along with this library; if not, write to the Free + * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/ { + compatible = "cavium,thunder-88xx"; + interrupt-parent = <&gic0>; + #address-cells = <2>; + #size-cells = <2>; + + psci { + compatible = "arm,psci-0.2"; + method = "smc"; + }; + + cpus { + #address-cells = <2>; + #size-cells = <0>; + + cpu@000 { + device_type = "cpu"; + compatible = "cavium,thunder", "arm,armv8"; + reg = <0x0 0x000>; + enable-method = "psci"; + }; + cpu@001 { + device_type = "cpu"; + compatible = "cavium,thunder", "arm,armv8"; + reg = <0x0 0x001>; + enable-method = "psci"; + }; + cpu@002 { + device_type = "cpu"; + compatible = "cavium,thunder", "arm,armv8"; + reg = <0x0 0x002>; + enable-method = "psci"; + }; + cpu@003 { + device_type = "cpu"; + compatible = "cavium,thunder", "arm,armv8"; + reg = <0x0 0x003>; + enable-method = "psci"; + }; + cpu@004 { + device_type = "cpu"; + compatible = "cavium,thunder", "arm,armv8"; + reg = <0x0 0x004>; + enable-method = "psci"; + }; + cpu@005 { + device_type = "cpu"; + compatible = "cavium,thunder", "arm,armv8"; + reg = <0x0 0x005>; + enable-method = "psci"; + }; + cpu@006 { + device_type = "cpu"; + compatible = "cavium,thunder", "arm,armv8"; + reg = <0x0 0x006>; + enable-method = "psci"; + }; + cpu@007 { + device_type = "cpu"; + compatible = "cavium,thunder", "arm,armv8"; + reg = <0x0 0x007>; + enable-method = "psci"; + }; + cpu@008 { + device_type = "cpu"; + compatible = "cavium,thunder", "arm,armv8"; + reg = <0x0 0x008>; + enable-method = "psci"; + }; + cpu@009 { + device_type = "cpu"; + compatible = "cavium,thunder", "arm,armv8"; + reg = <0x0 0x009>; + enable-method = "psci"; + }; + cpu@00a { + device_type = "cpu"; + compatible = "cavium,thunder", "arm,armv8"; + reg = <0x0 0x00a>; + enable-method = "psci"; + }; + cpu@00b { + device_type = "cpu"; + compatible = "cavium,thunder", "arm,armv8"; + reg = <0x0 0x00b>; + enable-method = "psci"; + }; + cpu@00c { + device_type = "cpu"; + compatible = "cavium,thunder", "arm,armv8"; + reg = <0x0 0x00c>; + enable-method = "psci"; + }; + cpu@00d { + device_type = "cpu"; + compatible = "cavium,thunder", "arm,armv8"; + reg = <0x0 0x00d>; + enable-method = "psci"; + }; + cpu@00e { + device_type = "cpu"; + compatible = "cavium,thunder", "arm,armv8"; + reg = <0x0 0x00e>; + enable-method = "psci"; + }; + cpu@00f { + device_type = "cpu"; + compatible = "cavium,thunder", "arm,armv8"; + reg = <0x0 0x00f>; + enable-method = "psci"; + }; + cpu@100 { + device_type = "cpu"; + compatible = "cavium,thunder", "arm,armv8"; + reg = <0x0 0x100>; + enable-method = "psci"; + }; + cpu@101 { + device_type = "cpu"; + compatible = "cavium,thunder", "arm,armv8"; + reg = <0x0 0x101>; + enable-method = "psci"; + }; + cpu@102 { + device_type = "cpu"; + compatible = "cavium,thunder", "arm,armv8"; + reg = <0x0 0x102>; + enable-method = "psci"; + }; + cpu@103 { + device_type = "cpu"; + compatible = "cavium,thunder", "arm,armv8"; + reg = <0x0 0x103>; + enable-method = "psci"; + }; + cpu@104 { + device_type = "cpu"; + compatible = "cavium,thunder", "arm,armv8"; + reg = <0x0 0x104>; + enable-method = "psci"; + }; + cpu@105 { + device_type = "cpu"; + compatible = "cavium,thunder", "arm,armv8"; + reg = <0x0 0x105>; + enable-method = "psci"; + }; + cpu@106 { + device_type = "cpu"; + compatible = "cavium,thunder", "arm,armv8"; + reg = <0x0 0x106>; + enable-method = "psci"; + }; + cpu@107 { + device_type = "cpu"; + compatible = "cavium,thunder", "arm,armv8"; + reg = <0x0 0x107>; + enable-method = "psci"; + }; + cpu@108 { + device_type = "cpu"; + compatible = "cavium,thunder", "arm,armv8"; + reg = <0x0 0x108>; + enable-method = "psci"; + }; + cpu@109 { + device_type = "cpu"; + compatible = "cavium,thunder", "arm,armv8"; + reg = <0x0 0x109>; + enable-method = "psci"; + }; + cpu@10a { + device_type = "cpu"; + compatible = "cavium,thunder", "arm,armv8"; + reg = <0x0 0x10a>; + enable-method = "psci"; + }; + cpu@10b { + device_type = "cpu"; + compatible = "cavium,thunder", "arm,armv8"; + reg = <0x0 0x10b>; + enable-method = "psci"; + }; + cpu@10c { + device_type = "cpu"; + compatible = "cavium,thunder", "arm,armv8"; + reg = <0x0 0x10c>; + enable-method = "psci"; + }; + cpu@10d { + device_type = "cpu"; + compatible = "cavium,thunder", "arm,armv8"; + reg = <0x0 0x10d>; + enable-method = "psci"; + }; + cpu@10e { + device_type = "cpu"; + compatible = "cavium,thunder", "arm,armv8"; + reg = <0x0 0x10e>; + enable-method = "psci"; + }; + cpu@10f { + device_type = "cpu"; + compatible = "cavium,thunder", "arm,armv8"; + reg = <0x0 0x10f>; + enable-method = "psci"; + }; + cpu@200 { + device_type = "cpu"; + compatible = "cavium,thunder", "arm,armv8"; + reg = <0x0 0x200>; + enable-method = "psci"; + }; + cpu@201 { + device_type = "cpu"; + compatible = "cavium,thunder", "arm,armv8"; + reg = <0x0 0x201>; + enable-method = "psci"; + }; + cpu@202 { + device_type = "cpu"; + compatible = "cavium,thunder", "arm,armv8"; + reg = <0x0 0x202>; + enable-method = "psci"; + }; + cpu@203 { + device_type = "cpu"; + compatible = "cavium,thunder", "arm,armv8"; + reg = <0x0 0x203>; + enable-method = "psci"; + }; + cpu@204 { + device_type = "cpu"; + compatible = "cavium,thunder", "arm,armv8"; + reg = <0x0 0x204>; + enable-method = "psci"; + }; + cpu@205 { + device_type = "cpu"; + compatible = "cavium,thunder", "arm,armv8"; + reg = <0x0 0x205>; + enable-method = "psci"; + }; + cpu@206 { + device_type = "cpu"; + compatible = "cavium,thunder", "arm,armv8"; + reg = <0x0 0x206>; + enable-method = "psci"; + }; + cpu@207 { + device_type = "cpu"; + compatible = "cavium,thunder", "arm,armv8"; + reg = <0x0 0x207>; + enable-method = "psci"; + }; + cpu@208 { + device_type = "cpu"; + compatible = "cavium,thunder", "arm,armv8"; + reg = <0x0 0x208>; + enable-method = "psci"; + }; + cpu@209 { + device_type = "cpu"; + compatible = "cavium,thunder", "arm,armv8"; + reg = <0x0 0x209>; + enable-method = "psci"; + }; + cpu@20a { + device_type = "cpu"; + compatible = "cavium,thunder", "arm,armv8"; + reg = <0x0 0x20a>; + enable-method = "psci"; + }; + cpu@20b { + device_type = "cpu"; + compatible = "cavium,thunder", "arm,armv8"; + reg = <0x0 0x20b>; + enable-method = "psci"; + }; + cpu@20c { + device_type = "cpu"; + compatible = "cavium,thunder", "arm,armv8"; + reg = <0x0 0x20c>; + enable-method = "psci"; + }; + cpu@20d { + device_type = "cpu"; + compatible = "cavium,thunder", "arm,armv8"; + reg = <0x0 0x20d>; + enable-method = "psci"; + }; + cpu@20e { + device_type = "cpu"; + compatible = "cavium,thunder", "arm,armv8"; + reg = <0x0 0x20e>; + enable-method = "psci"; + }; + cpu@20f { + device_type = "cpu"; + compatible = "cavium,thunder", "arm,armv8"; + reg = <0x0 0x20f>; + enable-method = "psci"; + }; + }; + + timer { + compatible = "arm,armv8-timer"; + interrupts = <1 13 0xff01>, + <1 14 0xff01>, + <1 11 0xff01>, + <1 10 0xff01>; + }; + + soc { + compatible = "simple-bus"; + #address-cells = <2>; + #size-cells = <2>; + ranges; + + refclk50mhz: refclk50mhz { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <50000000>; + clock-output-names = "refclk50mhz"; + }; + + gic0: interrupt-controller@8010,00000000 { + compatible = "arm,gic-v3"; + #interrupt-cells = <3>; + interrupt-controller; + reg = <0x8010 0x00000000 0x0 0x010000>, /* GICD */ + <0x8010 0x80000000 0x0 0x600000>; /* GICR */ + interrupts = <1 9 0xf04>; + }; + + uaa0: serial@87e0,24000000 { + compatible = "arm,pl011", "arm,primecell"; + reg = <0x87e0 0x24000000 0x0 0x1000>; + interrupts = <1 21 4>; + clocks = <&refclk50mhz>; + clock-names = "apb_pclk"; + }; + + uaa1: serial@87e0,25000000 { + compatible = "arm,pl011", "arm,primecell"; + reg = <0x87e0 0x25000000 0x0 0x1000>; + interrupts = <1 22 4>; + clocks = <&refclk50mhz>; + clock-names = "apb_pclk"; + }; + }; +}; diff --git a/arch/arm64/boot/dts/exynos/Makefile b/arch/arm64/boot/dts/exynos/Makefile new file mode 100644 index 000000000..20310e5b6 --- /dev/null +++ b/arch/arm64/boot/dts/exynos/Makefile @@ -0,0 +1,5 @@ +dtb-$(CONFIG_ARCH_EXYNOS7) += exynos7-espresso.dtb + +always := $(dtb-y) +subdir-y := $(dts-dirs) +clean-files := *.dtb diff --git a/arch/arm64/boot/dts/exynos/exynos7-espresso.dts b/arch/arm64/boot/dts/exynos/exynos7-espresso.dts new file mode 100644 index 000000000..5424cc450 --- /dev/null +++ b/arch/arm64/boot/dts/exynos/exynos7-espresso.dts @@ -0,0 +1,84 @@ +/* + * SAMSUNG Exynos7 Espresso board device tree source + * + * Copyright (c) 2014 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +/dts-v1/; +#include "exynos7.dtsi" + +/ { + model = "Samsung Exynos7 Espresso board based on EXYNOS7"; + compatible = "samsung,exynos7-espresso", "samsung,exynos7"; + + aliases { + serial0 = &serial_2; + mshc0 = &mmc_0; + mshc2 = &mmc_2; + }; + + chosen { + linux,stdout-path = &serial_2; + }; + + memory@40000000 { + device_type = "memory"; + reg = <0x0 0x40000000 0x0 0xC0000000>; + }; +}; + +&fin_pll { + clock-frequency = <24000000>; +}; + +&serial_2 { + status = "okay"; +}; + +&rtc { + status = "okay"; +}; + +&watchdog { + status = "okay"; +}; + +&adc { + status = "okay"; +}; + +&mmc_0 { + status = "okay"; + num-slots = <1>; + broken-cd; + cap-mmc-highspeed; + non-removable; + card-detect-delay = <200>; + clock-frequency = <800000000>; + samsung,dw-mshc-ciu-div = <3>; + samsung,dw-mshc-sdr-timing = <0 4>; + samsung,dw-mshc-ddr-timing = <0 2>; + pinctrl-names = "default"; + pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_qrdy &sd0_bus1 &sd0_bus4 &sd0_bus8>; + bus-width = <8>; +}; + +&mmc_2 { + status = "okay"; + num-slots = <1>; + cap-sd-highspeed; + card-detect-delay = <200>; + clock-frequency = <400000000>; + samsung,dw-mshc-ciu-div = <3>; + samsung,dw-mshc-sdr-timing = <2 3>; + samsung,dw-mshc-ddr-timing = <1 2>; + pinctrl-names = "default"; + pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus1 &sd2_bus4>; + bus-width = <4>; + disable-wp; +}; diff --git a/arch/arm64/boot/dts/exynos/exynos7-pinctrl.dtsi b/arch/arm64/boot/dts/exynos/exynos7-pinctrl.dtsi new file mode 100644 index 000000000..2eef4a279 --- /dev/null +++ b/arch/arm64/boot/dts/exynos/exynos7-pinctrl.dtsi @@ -0,0 +1,588 @@ +/* + * Samsung's Exynos7 SoC pin-mux and pin-config device tree source + * + * Copyright (c) 2014 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * Samsung's Exynos7 SoC pin-mux and pin-config options are listed as + * device tree nodes in this file. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +&pinctrl_alive { + gpa0: gpa0 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + interrupt-parent = <&gic>; + #interrupt-cells = <2>; + interrupts = <0 0 0>, <0 1 0>, <0 2 0>, <0 3 0>, + <0 4 0>, <0 5 0>, <0 6 0>, <0 7 0>; + }; + + gpa1: gpa1 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + interrupt-parent = <&gic>; + #interrupt-cells = <2>; + interrupts = <0 8 0>, <0 9 0>, <0 10 0>, <0 11 0>, + <0 12 0>, <0 13 0>, <0 14 0>, <0 15 0>; + }; + + gpa2: gpa2 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpa3: gpa3 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; +}; + +&pinctrl_bus0 { + gpb0: gpb0 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpc0: gpc0 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpc1: gpc1 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpc2: gpc2 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpc3: gpc3 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpd0: gpd0 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpd1: gpd1 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpd2: gpd2 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpd4: gpd4 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpd5: gpd5 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpd6: gpd6 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpd7: gpd7 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpd8: gpd8 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpg0: gpg0 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpg3: gpg3 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + hs_i2c10_bus: hs-i2c10-bus { + samsung,pins = "gpb0-1", "gpb0-0"; + samsung,pin-function = <2>; + samsung,pin-pud = <3>; + samsung,pin-drv = <0>; + }; + + hs_i2c11_bus: hs-i2c11-bus { + samsung,pins = "gpb0-3", "gpb0-2"; + samsung,pin-function = <2>; + samsung,pin-pud = <3>; + samsung,pin-drv = <0>; + }; + + hs_i2c2_bus: hs-i2c2-bus { + samsung,pins = "gpd0-3", "gpd0-2"; + samsung,pin-function = <3>; + samsung,pin-pud = <3>; + samsung,pin-drv = <0>; + }; + + uart0_data: uart0-data { + samsung,pins = "gpd0-0", "gpd0-1"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + uart0_fctl: uart0-fctl { + samsung,pins = "gpd0-2", "gpd0-3"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + uart2_data: uart2-data { + samsung,pins = "gpd1-4", "gpd1-5"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + hs_i2c3_bus: hs-i2c3-bus { + samsung,pins = "gpd1-3", "gpd1-2"; + samsung,pin-function = <3>; + samsung,pin-pud = <3>; + samsung,pin-drv = <0>; + }; + + uart1_data: uart1-data { + samsung,pins = "gpd1-0", "gpd1-1"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + uart1_fctl: uart1-fctl { + samsung,pins = "gpd1-2", "gpd1-3"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + hs_i2c0_bus: hs-i2c0-bus { + samsung,pins = "gpd2-1", "gpd2-0"; + samsung,pin-function = <2>; + samsung,pin-pud = <3>; + samsung,pin-drv = <0>; + }; + + hs_i2c1_bus: hs-i2c1-bus { + samsung,pins = "gpd2-3", "gpd2-2"; + samsung,pin-function = <2>; + samsung,pin-pud = <3>; + samsung,pin-drv = <0>; + }; + + hs_i2c9_bus: hs-i2c9-bus { + samsung,pins = "gpd2-7", "gpd2-6"; + samsung,pin-function = <3>; + samsung,pin-pud = <3>; + samsung,pin-drv = <0>; + }; + + pwm0_out: pwm0-out { + samsung,pins = "gpd2-4"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + pwm1_out: pwm1-out { + samsung,pins = "gpd2-5"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + pwm2_out: pwm2-out { + samsung,pins = "gpd2-6"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + pwm3_out: pwm3-out { + samsung,pins = "gpd2-7"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + hs_i2c8_bus: hs-i2c8-bus { + samsung,pins = "gpd5-3", "gpd5-2"; + samsung,pin-function = <3>; + samsung,pin-pud = <3>; + samsung,pin-drv = <0>; + }; + + uart3_data: uart3-data { + samsung,pins = "gpd5-0", "gpd5-1"; + samsung,pin-function = <3>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + spi2_bus: spi2-bus { + samsung,pins = "gpd5-0", "gpd5-1", "gpd5-2", "gpd5-3"; + samsung,pin-function = <2>; + samsung,pin-pud = <3>; + samsung,pin-drv = <0>; + }; + + spi1_bus: spi1-bus { + samsung,pins = "gpd6-2", "gpd6-3", "gpd6-4", "gpd6-5"; + samsung,pin-function = <2>; + samsung,pin-pud = <3>; + samsung,pin-drv = <0>; + }; + + spi0_bus: spi0-bus { + samsung,pins = "gpd8-0", "gpd8-1", "gpd6-0", "gpd6-1"; + samsung,pin-function = <2>; + samsung,pin-pud = <3>; + samsung,pin-drv = <0>; + }; + + hs_i2c4_bus: hs-i2c4-bus { + samsung,pins = "gpg3-1", "gpg3-0"; + samsung,pin-function = <2>; + samsung,pin-pud = <3>; + samsung,pin-drv = <0>; + }; + + hs_i2c5_bus: hs-i2c5-bus { + samsung,pins = "gpg3-3", "gpg3-2"; + samsung,pin-function = <2>; + samsung,pin-pud = <3>; + samsung,pin-drv = <0>; + }; +}; + +&pinctrl_nfc { + gpj0: gpj0 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + hs_i2c6_bus: hs-i2c6-bus { + samsung,pins = "gpj0-1", "gpj0-0"; + samsung,pin-function = <2>; + samsung,pin-pud = <3>; + samsung,pin-drv = <0>; + }; +}; + +&pinctrl_touch { + gpj1: gpj1 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + hs_i2c7_bus: hs-i2c7-bus { + samsung,pins = "gpj1-1", "gpj1-0"; + samsung,pin-function = <2>; + samsung,pin-pud = <3>; + samsung,pin-drv = <0>; + }; +}; + +&pinctrl_ff { + gpg4: gpg4 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + spi3_bus: spi3-bus { + samsung,pins = "gpg4-0", "gpg4-1", "gpg4-2", "gpg4-3"; + samsung,pin-function = <2>; + samsung,pin-pud = <3>; + samsung,pin-drv = <0>; + }; +}; + +&pinctrl_ese { + gpv7: gpv7 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + spi4_bus: spi4-bus { + samsung,pins = "gpv7-0", "gpv7-1", "gpv7-2", "gpv7-3"; + samsung,pin-function = <2>; + samsung,pin-pud = <3>; + samsung,pin-drv = <0>; + }; +}; + +&pinctrl_fsys0 { + gpr4: gpr4 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + sd2_clk: sd2-clk { + samsung,pins = "gpr4-0"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <3>; + }; + + sd2_cmd: sd2-cmd { + samsung,pins = "gpr4-1"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <3>; + }; + + sd2_cd: sd2-cd { + samsung,pins = "gpr4-2"; + samsung,pin-function = <2>; + samsung,pin-pud = <3>; + samsung,pin-drv = <3>; + }; + + sd2_bus1: sd2-bus-width1 { + samsung,pins = "gpr4-3"; + samsung,pin-function = <2>; + samsung,pin-pud = <3>; + samsung,pin-drv = <3>; + }; + + sd2_bus4: sd2-bus-width4 { + samsung,pins = "gpr4-4", "gpr4-5", "gpr4-6"; + samsung,pin-function = <2>; + samsung,pin-pud = <3>; + samsung,pin-drv = <3>; + }; +}; + +&pinctrl_fsys1 { + gpr0: gpr0 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpr1: gpr1 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpr2: gpr2 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpr3: gpr3 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + sd0_clk: sd0-clk { + samsung,pins = "gpr0-0"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <3>; + }; + + sd0_cmd: sd0-cmd { + samsung,pins = "gpr0-1"; + samsung,pin-function = <2>; + samsung,pin-pud = <3>; + samsung,pin-drv = <3>; + }; + + sd0_ds: sd0-ds { + samsung,pins = "gpr0-2"; + samsung,pin-function = <2>; + samsung,pin-pud = <1>; + samsung,pin-drv = <3>; + }; + + sd0_qrdy: sd0-qrdy { + samsung,pins = "gpr0-3"; + samsung,pin-function = <2>; + samsung,pin-pud = <1>; + samsung,pin-drv = <3>; + }; + + sd0_bus1: sd0-bus-width1 { + samsung,pins = "gpr1-0"; + samsung,pin-function = <2>; + samsung,pin-pud = <3>; + samsung,pin-drv = <3>; + }; + + sd0_bus4: sd0-bus-width4 { + samsung,pins = "gpr1-1", "gpr1-2", "gpr1-3"; + samsung,pin-function = <2>; + samsung,pin-pud = <3>; + samsung,pin-drv = <3>; + }; + + sd0_bus8: sd0-bus-width8 { + samsung,pins = "gpr1-4", "gpr1-5", "gpr1-6", "gpr1-7"; + samsung,pin-function = <2>; + samsung,pin-pud = <3>; + samsung,pin-drv = <3>; + }; + + sd1_clk: sd1-clk { + samsung,pins = "gpr2-0"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <2>; + }; + + sd1_cmd: sd1-cmd { + samsung,pins = "gpr2-1"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <2>; + }; + + sd1_ds: sd1-ds { + samsung,pins = "gpr2-2"; + samsung,pin-function = <2>; + samsung,pin-pud = <1>; + samsung,pin-drv = <6>; + }; + + sd1_qrdy: sd1-qrdy { + samsung,pins = "gpr2-3"; + samsung,pin-function = <2>; + samsung,pin-pud = <1>; + samsung,pin-drv = <6>; + }; + + sd1_int: sd1-int { + samsung,pins = "gpr2-4"; + samsung,pin-function = <2>; + samsung,pin-pud = <1>; + samsung,pin-drv = <6>; + }; + + sd1_bus1: sd1-bus-width1 { + samsung,pins = "gpr3-0"; + samsung,pin-function = <2>; + samsung,pin-pud = <3>; + samsung,pin-drv = <2>; + }; + + sd1_bus4: sd1-bus-width4 { + samsung,pins = "gpr3-1", "gpr3-2", "gpr3-3"; + samsung,pin-function = <2>; + samsung,pin-pud = <3>; + samsung,pin-drv = <2>; + }; + + sd1_bus8: sd1-bus-width8 { + samsung,pins = "gpr3-4", "gpr3-5", "gpr3-6", "gpr3-7"; + samsung,pin-function = <2>; + samsung,pin-pud = <3>; + samsung,pin-drv = <2>; + }; +}; diff --git a/arch/arm64/boot/dts/exynos/exynos7.dtsi b/arch/arm64/boot/dts/exynos/exynos7.dtsi new file mode 100644 index 000000000..d7a37c3a6 --- /dev/null +++ b/arch/arm64/boot/dts/exynos/exynos7.dtsi @@ -0,0 +1,530 @@ +/* + * SAMSUNG EXYNOS7 SoC device tree source + * + * Copyright (c) 2014 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <dt-bindings/clock/exynos7-clk.h> + +/ { + compatible = "samsung,exynos7"; + interrupt-parent = <&gic>; + #address-cells = <2>; + #size-cells = <2>; + + aliases { + pinctrl0 = &pinctrl_alive; + pinctrl1 = &pinctrl_bus0; + pinctrl2 = &pinctrl_nfc; + pinctrl3 = &pinctrl_touch; + pinctrl4 = &pinctrl_ff; + pinctrl5 = &pinctrl_ese; + pinctrl6 = &pinctrl_fsys0; + pinctrl7 = &pinctrl_fsys1; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a57", "arm,armv8"; + reg = <0x0>; + enable-method = "psci"; + }; + + cpu@1 { + device_type = "cpu"; + compatible = "arm,cortex-a57", "arm,armv8"; + reg = <0x1>; + enable-method = "psci"; + }; + + cpu@2 { + device_type = "cpu"; + compatible = "arm,cortex-a57", "arm,armv8"; + reg = <0x2>; + enable-method = "psci"; + }; + + cpu@3 { + device_type = "cpu"; + compatible = "arm,cortex-a57", "arm,armv8"; + reg = <0x3>; + enable-method = "psci"; + }; + }; + + psci { + compatible = "arm,psci-0.2"; + method = "smc"; + }; + + soc: soc { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0 0 0x18000000>; + + chipid@10000000 { + compatible = "samsung,exynos4210-chipid"; + reg = <0x10000000 0x100>; + }; + + fin_pll: xxti { + compatible = "fixed-clock"; + clock-output-names = "fin_pll"; + #clock-cells = <0>; + }; + + gic: interrupt-controller@11001000 { + compatible = "arm,gic-400"; + #interrupt-cells = <3>; + #address-cells = <0>; + interrupt-controller; + reg = <0x11001000 0x1000>, + <0x11002000 0x1000>, + <0x11004000 0x2000>, + <0x11006000 0x2000>; + }; + + clock_topc: clock-controller@10570000 { + compatible = "samsung,exynos7-clock-topc"; + reg = <0x10570000 0x10000>; + #clock-cells = <1>; + }; + + clock_top0: clock-controller@105d0000 { + compatible = "samsung,exynos7-clock-top0"; + reg = <0x105d0000 0xb000>; + #clock-cells = <1>; + clocks = <&fin_pll>, <&clock_topc DOUT_SCLK_BUS0_PLL>, + <&clock_topc DOUT_SCLK_BUS1_PLL>, + <&clock_topc DOUT_SCLK_CC_PLL>, + <&clock_topc DOUT_SCLK_MFC_PLL>; + clock-names = "fin_pll", "dout_sclk_bus0_pll", + "dout_sclk_bus1_pll", "dout_sclk_cc_pll", + "dout_sclk_mfc_pll"; + }; + + clock_top1: clock-controller@105e0000 { + compatible = "samsung,exynos7-clock-top1"; + reg = <0x105e0000 0xb000>; + #clock-cells = <1>; + clocks = <&fin_pll>, <&clock_topc DOUT_SCLK_BUS0_PLL>, + <&clock_topc DOUT_SCLK_BUS1_PLL>, + <&clock_topc DOUT_SCLK_CC_PLL>, + <&clock_topc DOUT_SCLK_MFC_PLL>; + clock-names = "fin_pll", "dout_sclk_bus0_pll", + "dout_sclk_bus1_pll", "dout_sclk_cc_pll", + "dout_sclk_mfc_pll"; + }; + + clock_ccore: clock-controller@105b0000 { + compatible = "samsung,exynos7-clock-ccore"; + reg = <0x105b0000 0xd00>; + #clock-cells = <1>; + clocks = <&fin_pll>, <&clock_topc DOUT_ACLK_CCORE_133>; + clock-names = "fin_pll", "dout_aclk_ccore_133"; + }; + + clock_peric0: clock-controller@13610000 { + compatible = "samsung,exynos7-clock-peric0"; + reg = <0x13610000 0xd00>; + #clock-cells = <1>; + clocks = <&fin_pll>, <&clock_top0 DOUT_ACLK_PERIC0>, + <&clock_top0 CLK_SCLK_UART0>; + clock-names = "fin_pll", "dout_aclk_peric0_66", + "sclk_uart0"; + }; + + clock_peric1: clock-controller@14c80000 { + compatible = "samsung,exynos7-clock-peric1"; + reg = <0x14c80000 0xd00>; + #clock-cells = <1>; + clocks = <&fin_pll>, <&clock_top0 DOUT_ACLK_PERIC1>, + <&clock_top0 CLK_SCLK_UART1>, + <&clock_top0 CLK_SCLK_UART2>, + <&clock_top0 CLK_SCLK_UART3>; + clock-names = "fin_pll", "dout_aclk_peric1_66", + "sclk_uart1", "sclk_uart2", "sclk_uart3"; + }; + + clock_peris: clock-controller@10040000 { + compatible = "samsung,exynos7-clock-peris"; + reg = <0x10040000 0xd00>; + #clock-cells = <1>; + clocks = <&fin_pll>, <&clock_topc DOUT_ACLK_PERIS>; + clock-names = "fin_pll", "dout_aclk_peris_66"; + }; + + clock_fsys0: clock-controller@10e90000 { + compatible = "samsung,exynos7-clock-fsys0"; + reg = <0x10e90000 0xd00>; + #clock-cells = <1>; + clocks = <&fin_pll>, <&clock_top1 DOUT_ACLK_FSYS0_200>, + <&clock_top1 DOUT_SCLK_MMC2>; + clock-names = "fin_pll", "dout_aclk_fsys0_200", + "dout_sclk_mmc2"; + }; + + clock_fsys1: clock-controller@156e0000 { + compatible = "samsung,exynos7-clock-fsys1"; + reg = <0x156e0000 0xd00>; + #clock-cells = <1>; + clocks = <&fin_pll>, <&clock_top1 DOUT_ACLK_FSYS1_200>, + <&clock_top1 DOUT_SCLK_MMC0>, + <&clock_top1 DOUT_SCLK_MMC1>; + clock-names = "fin_pll", "dout_aclk_fsys1_200", + "dout_sclk_mmc0", "dout_sclk_mmc1"; + }; + + serial_0: serial@13630000 { + compatible = "samsung,exynos4210-uart"; + reg = <0x13630000 0x100>; + interrupts = <0 440 0>; + clocks = <&clock_peric0 PCLK_UART0>, + <&clock_peric0 SCLK_UART0>; + clock-names = "uart", "clk_uart_baud0"; + status = "disabled"; + }; + + serial_1: serial@14c20000 { + compatible = "samsung,exynos4210-uart"; + reg = <0x14c20000 0x100>; + interrupts = <0 456 0>; + clocks = <&clock_peric1 PCLK_UART1>, + <&clock_peric1 SCLK_UART1>; + clock-names = "uart", "clk_uart_baud0"; + status = "disabled"; + }; + + serial_2: serial@14c30000 { + compatible = "samsung,exynos4210-uart"; + reg = <0x14c30000 0x100>; + interrupts = <0 457 0>; + clocks = <&clock_peric1 PCLK_UART2>, + <&clock_peric1 SCLK_UART2>; + clock-names = "uart", "clk_uart_baud0"; + status = "disabled"; + }; + + serial_3: serial@14c40000 { + compatible = "samsung,exynos4210-uart"; + reg = <0x14c40000 0x100>; + interrupts = <0 458 0>; + clocks = <&clock_peric1 PCLK_UART3>, + <&clock_peric1 SCLK_UART3>; + clock-names = "uart", "clk_uart_baud0"; + status = "disabled"; + }; + + pinctrl_alive: pinctrl@10580000 { + compatible = "samsung,exynos7-pinctrl"; + reg = <0x10580000 0x1000>; + + wakeup-interrupt-controller { + compatible = "samsung,exynos7-wakeup-eint"; + interrupt-parent = <&gic>; + interrupts = <0 16 0>; + }; + }; + + pinctrl_bus0: pinctrl@13470000 { + compatible = "samsung,exynos7-pinctrl"; + reg = <0x13470000 0x1000>; + interrupts = <0 383 0>; + }; + + pinctrl_nfc: pinctrl@14cd0000 { + compatible = "samsung,exynos7-pinctrl"; + reg = <0x14cd0000 0x1000>; + interrupts = <0 473 0>; + }; + + pinctrl_touch: pinctrl@14ce0000 { + compatible = "samsung,exynos7-pinctrl"; + reg = <0x14ce0000 0x1000>; + interrupts = <0 474 0>; + }; + + pinctrl_ff: pinctrl@14c90000 { + compatible = "samsung,exynos7-pinctrl"; + reg = <0x14c90000 0x1000>; + interrupts = <0 475 0>; + }; + + pinctrl_ese: pinctrl@14ca0000 { + compatible = "samsung,exynos7-pinctrl"; + reg = <0x14ca0000 0x1000>; + interrupts = <0 476 0>; + }; + + pinctrl_fsys0: pinctrl@10e60000 { + compatible = "samsung,exynos7-pinctrl"; + reg = <0x10e60000 0x1000>; + interrupts = <0 221 0>; + }; + + pinctrl_fsys1: pinctrl@15690000 { + compatible = "samsung,exynos7-pinctrl"; + reg = <0x15690000 0x1000>; + interrupts = <0 203 0>; + }; + + hsi2c_0: hsi2c@13640000 { + compatible = "samsung,exynos7-hsi2c"; + reg = <0x13640000 0x1000>; + interrupts = <0 441 0>; + #address-cells = <1>; + #size-cells = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&hs_i2c0_bus>; + clocks = <&clock_peric0 PCLK_HSI2C0>; + clock-names = "hsi2c"; + status = "disabled"; + }; + + hsi2c_1: hsi2c@13650000 { + compatible = "samsung,exynos7-hsi2c"; + reg = <0x13650000 0x1000>; + interrupts = <0 442 0>; + #address-cells = <1>; + #size-cells = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&hs_i2c1_bus>; + clocks = <&clock_peric0 PCLK_HSI2C1>; + clock-names = "hsi2c"; + status = "disabled"; + }; + + hsi2c_2: hsi2c@14e60000 { + compatible = "samsung,exynos7-hsi2c"; + reg = <0x14e60000 0x1000>; + interrupts = <0 459 0>; + #address-cells = <1>; + #size-cells = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&hs_i2c2_bus>; + clocks = <&clock_peric1 PCLK_HSI2C2>; + clock-names = "hsi2c"; + status = "disabled"; + }; + + hsi2c_3: hsi2c@14e70000 { + compatible = "samsung,exynos7-hsi2c"; + reg = <0x14e70000 0x1000>; + interrupts = <0 460 0>; + #address-cells = <1>; + #size-cells = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&hs_i2c3_bus>; + clocks = <&clock_peric1 PCLK_HSI2C3>; + clock-names = "hsi2c"; + status = "disabled"; + }; + + hsi2c_4: hsi2c@13660000 { + compatible = "samsung,exynos7-hsi2c"; + reg = <0x13660000 0x1000>; + interrupts = <0 443 0>; + #address-cells = <1>; + #size-cells = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&hs_i2c4_bus>; + clocks = <&clock_peric0 PCLK_HSI2C4>; + clock-names = "hsi2c"; + status = "disabled"; + }; + + hsi2c_5: hsi2c@13670000 { + compatible = "samsung,exynos7-hsi2c"; + reg = <0x13670000 0x1000>; + interrupts = <0 444 0>; + #address-cells = <1>; + #size-cells = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&hs_i2c5_bus>; + clocks = <&clock_peric0 PCLK_HSI2C5>; + clock-names = "hsi2c"; + status = "disabled"; + }; + + hsi2c_6: hsi2c@14e00000 { + compatible = "samsung,exynos7-hsi2c"; + reg = <0x14e00000 0x1000>; + interrupts = <0 461 0>; + #address-cells = <1>; + #size-cells = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&hs_i2c6_bus>; + clocks = <&clock_peric1 PCLK_HSI2C6>; + clock-names = "hsi2c"; + status = "disabled"; + }; + + hsi2c_7: hsi2c@13e10000 { + compatible = "samsung,exynos7-hsi2c"; + reg = <0x13e10000 0x1000>; + interrupts = <0 462 0>; + #address-cells = <1>; + #size-cells = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&hs_i2c7_bus>; + clocks = <&clock_peric1 PCLK_HSI2C7>; + clock-names = "hsi2c"; + status = "disabled"; + }; + + hsi2c_8: hsi2c@14e20000 { + compatible = "samsung,exynos7-hsi2c"; + reg = <0x14e20000 0x1000>; + interrupts = <0 463 0>; + #address-cells = <1>; + #size-cells = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&hs_i2c8_bus>; + clocks = <&clock_peric1 PCLK_HSI2C8>; + clock-names = "hsi2c"; + status = "disabled"; + }; + + hsi2c_9: hsi2c@13680000 { + compatible = "samsung,exynos7-hsi2c"; + reg = <0x13680000 0x1000>; + interrupts = <0 445 0>; + #address-cells = <1>; + #size-cells = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&hs_i2c9_bus>; + clocks = <&clock_peric0 PCLK_HSI2C9>; + clock-names = "hsi2c"; + status = "disabled"; + }; + + hsi2c_10: hsi2c@13690000 { + compatible = "samsung,exynos7-hsi2c"; + reg = <0x13690000 0x1000>; + interrupts = <0 446 0>; + #address-cells = <1>; + #size-cells = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&hs_i2c10_bus>; + clocks = <&clock_peric0 PCLK_HSI2C10>; + clock-names = "hsi2c"; + status = "disabled"; + }; + + hsi2c_11: hsi2c@136a0000 { + compatible = "samsung,exynos7-hsi2c"; + reg = <0x136a0000 0x1000>; + interrupts = <0 447 0>; + #address-cells = <1>; + #size-cells = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&hs_i2c11_bus>; + clocks = <&clock_peric0 PCLK_HSI2C11>; + clock-names = "hsi2c"; + status = "disabled"; + }; + + timer { + compatible = "arm,armv8-timer"; + interrupts = <1 13 0xff01>, + <1 14 0xff01>, + <1 11 0xff01>, + <1 10 0xff01>; + }; + + pmu_system_controller: system-controller@105c0000 { + compatible = "samsung,exynos7-pmu", "syscon"; + reg = <0x105c0000 0x5000>; + }; + + rtc: rtc@10590000 { + compatible = "samsung,s3c6410-rtc"; + reg = <0x10590000 0x100>; + interrupts = <0 355 0>, <0 356 0>; + clocks = <&clock_ccore PCLK_RTC>; + clock-names = "rtc"; + status = "disabled"; + }; + + watchdog: watchdog@101d0000 { + compatible = "samsung,exynos7-wdt"; + reg = <0x101d0000 0x100>; + interrupts = <0 110 0>; + clocks = <&clock_peris PCLK_WDT>; + clock-names = "watchdog"; + samsung,syscon-phandle = <&pmu_system_controller>; + status = "disabled"; + }; + + mmc_0: mmc@15740000 { + compatible = "samsung,exynos7-dw-mshc-smu"; + interrupts = <0 201 0>; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x15740000 0x2000>; + clocks = <&clock_fsys1 ACLK_MMC0>, + <&clock_top1 CLK_SCLK_MMC0>; + clock-names = "biu", "ciu"; + fifo-depth = <0x40>; + status = "disabled"; + }; + + mmc_1: mmc@15750000 { + compatible = "samsung,exynos7-dw-mshc"; + interrupts = <0 202 0>; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x15750000 0x2000>; + clocks = <&clock_fsys1 ACLK_MMC1>, + <&clock_top1 CLK_SCLK_MMC1>; + clock-names = "biu", "ciu"; + fifo-depth = <0x40>; + status = "disabled"; + }; + + mmc_2: mmc@15560000 { + compatible = "samsung,exynos7-dw-mshc-smu"; + interrupts = <0 216 0>; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x15560000 0x2000>; + clocks = <&clock_fsys0 ACLK_MMC2>, + <&clock_top1 CLK_SCLK_MMC2>; + clock-names = "biu", "ciu"; + fifo-depth = <0x40>; + status = "disabled"; + }; + + adc: adc@13620000 { + compatible = "samsung,exynos7-adc"; + reg = <0x13620000 0x100>; + interrupts = <0 448 0>; + clocks = <&clock_peric0 PCLK_ADCIF>; + clock-names = "adc"; + #io-channel-cells = <1>; + io-channel-ranges; + status = "disabled"; + }; + + pwm: pwm@136c0000 { + compatible = "samsung,exynos4210-pwm"; + reg = <0x136c0000 0x100>; + samsung,pwm-outputs = <0>, <1>, <2>, <3>; + #pwm-cells = <3>; + clocks = <&clock_peric0 PCLK_PWM>; + clock-names = "timers"; + }; + }; +}; + +#include "exynos7-pinctrl.dtsi" diff --git a/arch/arm64/boot/dts/freescale/Makefile b/arch/arm64/boot/dts/freescale/Makefile new file mode 100644 index 000000000..4f2de3e78 --- /dev/null +++ b/arch/arm64/boot/dts/freescale/Makefile @@ -0,0 +1,5 @@ +dtb-$(CONFIG_ARCH_FSL_LS2085A) += fsl-ls2085a-simu.dtb + +always := $(dtb-y) +subdir-y := $(dts-dirs) +clean-files := *.dtb diff --git a/arch/arm64/boot/dts/freescale/fsl-ls2085a-simu.dts b/arch/arm64/boot/dts/freescale/fsl-ls2085a-simu.dts new file mode 100644 index 000000000..82e2a6fcc --- /dev/null +++ b/arch/arm64/boot/dts/freescale/fsl-ls2085a-simu.dts @@ -0,0 +1,65 @@ +/* + * Device Tree file for Freescale LS2085a software Simulator model + * + * Copyright (C) 2014, Freescale Semiconductor + * + * Bhupesh Sharma <bhupesh.sharma@freescale.com> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This library is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This library is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public + * License along with this library; if not, write to the Free + * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; + +/include/ "fsl-ls2085a.dtsi" + +/ { + model = "Freescale Layerscape 2085a software Simulator model"; + compatible = "fsl,ls2085a-simu", "fsl,ls2085a"; + + ethernet@2210000 { + compatible = "smsc,lan91c111"; + reg = <0x0 0x2210000 0x0 0x100>; + interrupts = <0 58 0x1>; + }; +}; diff --git a/arch/arm64/boot/dts/freescale/fsl-ls2085a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls2085a.dtsi new file mode 100644 index 000000000..e281ceb33 --- /dev/null +++ b/arch/arm64/boot/dts/freescale/fsl-ls2085a.dtsi @@ -0,0 +1,163 @@ +/* + * Device Tree Include file for Freescale Layerscape-2085A family SoC. + * + * Copyright (C) 2014, Freescale Semiconductor + * + * Bhupesh Sharma <bhupesh.sharma@freescale.com> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPLv2 or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This library is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This library is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public + * License along with this library; if not, write to the Free + * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/ { + compatible = "fsl,ls2085a"; + interrupt-parent = <&gic>; + #address-cells = <2>; + #size-cells = <2>; + + cpus { + #address-cells = <2>; + #size-cells = <0>; + + /* + * We expect the enable-method for cpu's to be "psci", but this + * is dependent on the SoC FW, which will fill this in. + * + * Currently supported enable-method is psci v0.2 + */ + + /* We have 4 clusters having 2 Cortex-A57 cores each */ + cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a57"; + reg = <0x0 0x0>; + }; + + cpu@1 { + device_type = "cpu"; + compatible = "arm,cortex-a57"; + reg = <0x0 0x1>; + }; + + cpu@100 { + device_type = "cpu"; + compatible = "arm,cortex-a57"; + reg = <0x0 0x100>; + }; + + cpu@101 { + device_type = "cpu"; + compatible = "arm,cortex-a57"; + reg = <0x0 0x101>; + }; + + cpu@200 { + device_type = "cpu"; + compatible = "arm,cortex-a57"; + reg = <0x0 0x200>; + }; + + cpu@201 { + device_type = "cpu"; + compatible = "arm,cortex-a57"; + reg = <0x0 0x201>; + }; + + cpu@300 { + device_type = "cpu"; + compatible = "arm,cortex-a57"; + reg = <0x0 0x300>; + }; + + cpu@301 { + device_type = "cpu"; + compatible = "arm,cortex-a57"; + reg = <0x0 0x301>; + }; + }; + + memory@80000000 { + device_type = "memory"; + reg = <0x00000000 0x80000000 0 0x80000000>; + /* DRAM space - 1, size : 2 GB DRAM */ + }; + + gic: interrupt-controller@6000000 { + compatible = "arm,gic-v3"; + reg = <0x0 0x06000000 0 0x10000>, /* GIC Dist */ + <0x0 0x06100000 0 0x100000>; /* GICR (RD_base + SGI_base) */ + #interrupt-cells = <3>; + interrupt-controller; + interrupts = <1 9 0x4>; + }; + + timer { + compatible = "arm,armv8-timer"; + interrupts = <1 13 0x8>, /* Physical Secure PPI, active-low */ + <1 14 0x8>, /* Physical Non-Secure PPI, active-low */ + <1 11 0x8>, /* Virtual PPI, active-low */ + <1 10 0x8>; /* Hypervisor PPI, active-low */ + }; + + serial0: serial@21c0500 { + device_type = "serial"; + compatible = "fsl,ns16550", "ns16550a"; + reg = <0x0 0x21c0500 0x0 0x100>; + clock-frequency = <0>; /* Updated by bootloader */ + interrupts = <0 32 0x1>; /* edge triggered */ + }; + + serial1: serial@21c0600 { + device_type = "serial"; + compatible = "fsl,ns16550", "ns16550a"; + reg = <0x0 0x21c0600 0x0 0x100>; + clock-frequency = <0>; /* Updated by bootloader */ + interrupts = <0 32 0x1>; /* edge triggered */ + }; + + fsl_mc: fsl-mc@80c000000 { + compatible = "fsl,qoriq-mc"; + reg = <0x00000008 0x0c000000 0 0x40>, /* MC portal base */ + <0x00000000 0x08340000 0 0x40000>; /* MC control reg */ + }; +}; diff --git a/arch/arm64/boot/dts/include/dt-bindings b/arch/arm64/boot/dts/include/dt-bindings new file mode 120000 index 000000000..08c00e497 --- /dev/null +++ b/arch/arm64/boot/dts/include/dt-bindings @@ -0,0 +1 @@ +../../../../../include/dt-bindings
\ No newline at end of file diff --git a/arch/arm64/boot/dts/mediatek/Makefile b/arch/arm64/boot/dts/mediatek/Makefile new file mode 100644 index 000000000..3ce24622b --- /dev/null +++ b/arch/arm64/boot/dts/mediatek/Makefile @@ -0,0 +1,5 @@ +dtb-$(CONFIG_ARCH_MEDIATEK) += mt8173-evb.dtb + +always := $(dtb-y) +subdir-y := $(dts-dirs) +clean-files := *.dtb diff --git a/arch/arm64/boot/dts/mediatek/mt8173-evb.dts b/arch/arm64/boot/dts/mediatek/mt8173-evb.dts new file mode 100644 index 000000000..d0ab012fa --- /dev/null +++ b/arch/arm64/boot/dts/mediatek/mt8173-evb.dts @@ -0,0 +1,39 @@ +/* + * Copyright (c) 2014 MediaTek Inc. + * Author: Eddie Huang <eddie.huang@mediatek.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +/dts-v1/; +#include "mt8173.dtsi" + +/ { + model = "MediaTek MT8173 evaluation board"; + compatible = "mediatek,mt8173-evb", "mediatek,mt8173"; + + aliases { + serial0 = &uart0; + serial1 = &uart1; + serial2 = &uart2; + serial3 = &uart3; + }; + + memory@40000000 { + device_type = "memory"; + reg = <0 0x40000000 0 0x80000000>; + }; + + chosen { }; +}; + +&uart0 { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/mediatek/mt8173-pinfunc.h b/arch/arm64/boot/dts/mediatek/mt8173-pinfunc.h new file mode 100644 index 000000000..d2f3809af --- /dev/null +++ b/arch/arm64/boot/dts/mediatek/mt8173-pinfunc.h @@ -0,0 +1,682 @@ +/* + * Copyright (c) 2014 MediaTek Inc. + * Author: Hongzhou.Yang <hongzhou.yang@mediatek.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef __DTS_MT8173_PINFUNC_H +#define __DTS_MT8173_PINFUNC_H + +#include <dt-bindings/pinctrl/mt65xx.h> + +#define MT8173_PIN_0_EINT0__FUNC_GPIO0 (MTK_PIN_NO(0) | 0) +#define MT8173_PIN_0_EINT0__FUNC_IRDA_PDN (MTK_PIN_NO(0) | 1) +#define MT8173_PIN_0_EINT0__FUNC_I2S1_WS (MTK_PIN_NO(0) | 2) +#define MT8173_PIN_0_EINT0__FUNC_AUD_SPDIF (MTK_PIN_NO(0) | 3) +#define MT8173_PIN_0_EINT0__FUNC_UTXD0 (MTK_PIN_NO(0) | 4) +#define MT8173_PIN_0_EINT0__FUNC_DBG_MON_A_20_ (MTK_PIN_NO(0) | 7) + +#define MT8173_PIN_1_EINT1__FUNC_GPIO1 (MTK_PIN_NO(1) | 0) +#define MT8173_PIN_1_EINT1__FUNC_IRDA_RXD (MTK_PIN_NO(1) | 1) +#define MT8173_PIN_1_EINT1__FUNC_I2S1_BCK (MTK_PIN_NO(1) | 2) +#define MT8173_PIN_1_EINT1__FUNC_SDA5 (MTK_PIN_NO(1) | 3) +#define MT8173_PIN_1_EINT1__FUNC_URXD0 (MTK_PIN_NO(1) | 4) +#define MT8173_PIN_1_EINT1__FUNC_DBG_MON_A_21_ (MTK_PIN_NO(1) | 7) + +#define MT8173_PIN_2_EINT2__FUNC_GPIO2 (MTK_PIN_NO(2) | 0) +#define MT8173_PIN_2_EINT2__FUNC_IRDA_TXD (MTK_PIN_NO(2) | 1) +#define MT8173_PIN_2_EINT2__FUNC_I2S1_MCK (MTK_PIN_NO(2) | 2) +#define MT8173_PIN_2_EINT2__FUNC_SCL5 (MTK_PIN_NO(2) | 3) +#define MT8173_PIN_2_EINT2__FUNC_UTXD3 (MTK_PIN_NO(2) | 4) +#define MT8173_PIN_2_EINT2__FUNC_DBG_MON_A_22_ (MTK_PIN_NO(2) | 7) + +#define MT8173_PIN_3_EINT3__FUNC_GPIO3 (MTK_PIN_NO(3) | 0) +#define MT8173_PIN_3_EINT3__FUNC_DSI1_TE (MTK_PIN_NO(3) | 1) +#define MT8173_PIN_3_EINT3__FUNC_I2S1_DO_1 (MTK_PIN_NO(3) | 2) +#define MT8173_PIN_3_EINT3__FUNC_SDA3 (MTK_PIN_NO(3) | 3) +#define MT8173_PIN_3_EINT3__FUNC_URXD3 (MTK_PIN_NO(3) | 4) +#define MT8173_PIN_3_EINT3__FUNC_DBG_MON_A_23_ (MTK_PIN_NO(3) | 7) + +#define MT8173_PIN_4_EINT4__FUNC_GPIO4 (MTK_PIN_NO(4) | 0) +#define MT8173_PIN_4_EINT4__FUNC_DISP_PWM1 (MTK_PIN_NO(4) | 1) +#define MT8173_PIN_4_EINT4__FUNC_I2S1_DO_2 (MTK_PIN_NO(4) | 2) +#define MT8173_PIN_4_EINT4__FUNC_SCL3 (MTK_PIN_NO(4) | 3) +#define MT8173_PIN_4_EINT4__FUNC_UCTS3 (MTK_PIN_NO(4) | 4) +#define MT8173_PIN_4_EINT4__FUNC_SFWP_B (MTK_PIN_NO(4) | 6) + +#define MT8173_PIN_5_EINT5__FUNC_GPIO5 (MTK_PIN_NO(5) | 0) +#define MT8173_PIN_5_EINT5__FUNC_PCM1_CLK (MTK_PIN_NO(5) | 1) +#define MT8173_PIN_5_EINT5__FUNC_I2S2_WS (MTK_PIN_NO(5) | 2) +#define MT8173_PIN_5_EINT5__FUNC_SPI_CK_3_ (MTK_PIN_NO(5) | 3) +#define MT8173_PIN_5_EINT5__FUNC_URTS3 (MTK_PIN_NO(5) | 4) +#define MT8173_PIN_5_EINT5__FUNC_AP_MD32_JTAG_TMS (MTK_PIN_NO(5) | 5) +#define MT8173_PIN_5_EINT5__FUNC_SFOUT (MTK_PIN_NO(5) | 6) + +#define MT8173_PIN_6_EINT6__FUNC_GPIO6 (MTK_PIN_NO(6) | 0) +#define MT8173_PIN_6_EINT6__FUNC_PCM1_SYNC (MTK_PIN_NO(6) | 1) +#define MT8173_PIN_6_EINT6__FUNC_I2S2_BCK (MTK_PIN_NO(6) | 2) +#define MT8173_PIN_6_EINT6__FUNC_SPI_MI_3_ (MTK_PIN_NO(6) | 3) +#define MT8173_PIN_6_EINT6__FUNC_AP_MD32_JTAG_TCK (MTK_PIN_NO(6) | 5) +#define MT8173_PIN_6_EINT6__FUNC_SFCS0 (MTK_PIN_NO(6) | 6) + +#define MT8173_PIN_7_EINT7__FUNC_GPIO7 (MTK_PIN_NO(7) | 0) +#define MT8173_PIN_7_EINT7__FUNC_PCM1_DI (MTK_PIN_NO(7) | 1) +#define MT8173_PIN_7_EINT7__FUNC_I2S2_DI_1 (MTK_PIN_NO(7) | 2) +#define MT8173_PIN_7_EINT7__FUNC_SPI_MO_3_ (MTK_PIN_NO(7) | 3) +#define MT8173_PIN_7_EINT7__FUNC_AP_MD32_JTAG_TDI (MTK_PIN_NO(7) | 5) +#define MT8173_PIN_7_EINT7__FUNC_SFHOLD (MTK_PIN_NO(7) | 6) + +#define MT8173_PIN_8_EINT8__FUNC_GPIO8 (MTK_PIN_NO(8) | 0) +#define MT8173_PIN_8_EINT8__FUNC_PCM1_DO (MTK_PIN_NO(8) | 1) +#define MT8173_PIN_8_EINT8__FUNC_I2S2_DI_2 (MTK_PIN_NO(8) | 2) +#define MT8173_PIN_8_EINT8__FUNC_SPI_CS_3_ (MTK_PIN_NO(8) | 3) +#define MT8173_PIN_8_EINT8__FUNC_AUD_SPDIF (MTK_PIN_NO(8) | 4) +#define MT8173_PIN_8_EINT8__FUNC_AP_MD32_JTAG_TDO (MTK_PIN_NO(8) | 5) +#define MT8173_PIN_8_EINT8__FUNC_SFIN (MTK_PIN_NO(8) | 6) + +#define MT8173_PIN_9_EINT9__FUNC_GPIO9 (MTK_PIN_NO(9) | 0) +#define MT8173_PIN_9_EINT9__FUNC_USB_DRVVBUS_P0 (MTK_PIN_NO(9) | 1) +#define MT8173_PIN_9_EINT9__FUNC_I2S2_MCK (MTK_PIN_NO(9) | 2) +#define MT8173_PIN_9_EINT9__FUNC_USB_DRVVBUS_P1 (MTK_PIN_NO(9) | 4) +#define MT8173_PIN_9_EINT9__FUNC_AP_MD32_JTAG_TRST (MTK_PIN_NO(9) | 5) +#define MT8173_PIN_9_EINT9__FUNC_SFCK (MTK_PIN_NO(9) | 6) + +#define MT8173_PIN_10_EINT10__FUNC_GPIO10 (MTK_PIN_NO(10) | 0) +#define MT8173_PIN_10_EINT10__FUNC_CLKM0 (MTK_PIN_NO(10) | 1) +#define MT8173_PIN_10_EINT10__FUNC_DSI1_TE (MTK_PIN_NO(10) | 2) +#define MT8173_PIN_10_EINT10__FUNC_DISP_PWM1 (MTK_PIN_NO(10) | 3) +#define MT8173_PIN_10_EINT10__FUNC_PWM4 (MTK_PIN_NO(10) | 4) +#define MT8173_PIN_10_EINT10__FUNC_IRDA_RXD (MTK_PIN_NO(10) | 5) + +#define MT8173_PIN_11_EINT11__FUNC_GPIO11 (MTK_PIN_NO(11) | 0) +#define MT8173_PIN_11_EINT11__FUNC_CLKM1 (MTK_PIN_NO(11) | 1) +#define MT8173_PIN_11_EINT11__FUNC_I2S3_WS (MTK_PIN_NO(11) | 2) +#define MT8173_PIN_11_EINT11__FUNC_USB_DRVVBUS_P0 (MTK_PIN_NO(11) | 3) +#define MT8173_PIN_11_EINT11__FUNC_PWM5 (MTK_PIN_NO(11) | 4) +#define MT8173_PIN_11_EINT11__FUNC_IRDA_TXD (MTK_PIN_NO(11) | 5) +#define MT8173_PIN_11_EINT11__FUNC_USB_DRVVBUS_P1 (MTK_PIN_NO(11) | 6) +#define MT8173_PIN_11_EINT11__FUNC_DBG_MON_B_30_ (MTK_PIN_NO(11) | 7) + +#define MT8173_PIN_12_EINT12__FUNC_GPIO12 (MTK_PIN_NO(12) | 0) +#define MT8173_PIN_12_EINT12__FUNC_CLKM2 (MTK_PIN_NO(12) | 1) +#define MT8173_PIN_12_EINT12__FUNC_I2S3_BCK (MTK_PIN_NO(12) | 2) +#define MT8173_PIN_12_EINT12__FUNC_SRCLKENA0 (MTK_PIN_NO(12) | 3) +#define MT8173_PIN_12_EINT12__FUNC_I2S2_WS (MTK_PIN_NO(12) | 5) +#define MT8173_PIN_12_EINT12__FUNC_DBG_MON_B_32_ (MTK_PIN_NO(12) | 7) + +#define MT8173_PIN_13_EINT13__FUNC_GPIO13 (MTK_PIN_NO(13) | 0) +#define MT8173_PIN_13_EINT13__FUNC_CLKM3 (MTK_PIN_NO(13) | 1) +#define MT8173_PIN_13_EINT13__FUNC_I2S3_MCK (MTK_PIN_NO(13) | 2) +#define MT8173_PIN_13_EINT13__FUNC_SRCLKENA0 (MTK_PIN_NO(13) | 3) +#define MT8173_PIN_13_EINT13__FUNC_I2S2_BCK (MTK_PIN_NO(13) | 5) +#define MT8173_PIN_13_EINT13__FUNC_DBG_MON_A_32_ (MTK_PIN_NO(13) | 7) + +#define MT8173_PIN_14_EINT14__FUNC_GPIO14 (MTK_PIN_NO(14) | 0) +#define MT8173_PIN_14_EINT14__FUNC_CMDAT0 (MTK_PIN_NO(14) | 1) +#define MT8173_PIN_14_EINT14__FUNC_CMCSD0 (MTK_PIN_NO(14) | 2) +#define MT8173_PIN_14_EINT14__FUNC_CLKM2 (MTK_PIN_NO(14) | 4) +#define MT8173_PIN_14_EINT14__FUNC_DBG_MON_B_6_ (MTK_PIN_NO(14) | 7) + +#define MT8173_PIN_15_EINT15__FUNC_GPIO15 (MTK_PIN_NO(15) | 0) +#define MT8173_PIN_15_EINT15__FUNC_CMDAT1 (MTK_PIN_NO(15) | 1) +#define MT8173_PIN_15_EINT15__FUNC_CMCSD1 (MTK_PIN_NO(15) | 2) +#define MT8173_PIN_15_EINT15__FUNC_CMFLASH (MTK_PIN_NO(15) | 3) +#define MT8173_PIN_15_EINT15__FUNC_CLKM3 (MTK_PIN_NO(15) | 4) +#define MT8173_PIN_15_EINT15__FUNC_DBG_MON_B_29_ (MTK_PIN_NO(15) | 7) + +#define MT8173_PIN_16_IDDIG__FUNC_GPIO16 (MTK_PIN_NO(16) | 0) +#define MT8173_PIN_16_IDDIG__FUNC_IDDIG (MTK_PIN_NO(16) | 1) +#define MT8173_PIN_16_IDDIG__FUNC_CMFLASH (MTK_PIN_NO(16) | 2) +#define MT8173_PIN_16_IDDIG__FUNC_PWM5 (MTK_PIN_NO(16) | 4) + +#define MT8173_PIN_17_WATCHDOG__FUNC_GPIO17 (MTK_PIN_NO(17) | 0) +#define MT8173_PIN_17_WATCHDOG__FUNC_WATCHDOG_AO (MTK_PIN_NO(17) | 1) + +#define MT8173_PIN_18_CEC__FUNC_GPIO18 (MTK_PIN_NO(18) | 0) +#define MT8173_PIN_18_CEC__FUNC_CEC (MTK_PIN_NO(18) | 1) + +#define MT8173_PIN_19_HDMISCK__FUNC_GPIO19 (MTK_PIN_NO(19) | 0) +#define MT8173_PIN_19_HDMISCK__FUNC_HDMISCK (MTK_PIN_NO(19) | 1) +#define MT8173_PIN_19_HDMISCK__FUNC_HDCP_SCL (MTK_PIN_NO(19) | 2) + +#define MT8173_PIN_20_HDMISD__FUNC_GPIO20 (MTK_PIN_NO(20) | 0) +#define MT8173_PIN_20_HDMISD__FUNC_HDMISD (MTK_PIN_NO(20) | 1) +#define MT8173_PIN_20_HDMISD__FUNC_HDCP_SDA (MTK_PIN_NO(20) | 2) + +#define MT8173_PIN_21_HTPLG__FUNC_GPIO21 (MTK_PIN_NO(21) | 0) +#define MT8173_PIN_21_HTPLG__FUNC_HTPLG (MTK_PIN_NO(21) | 1) + +#define MT8173_PIN_22_MSDC3_DAT0__FUNC_GPIO22 (MTK_PIN_NO(22) | 0) +#define MT8173_PIN_22_MSDC3_DAT0__FUNC_MSDC3_DAT0 (MTK_PIN_NO(22) | 1) + +#define MT8173_PIN_23_MSDC3_DAT1__FUNC_GPIO23 (MTK_PIN_NO(23) | 0) +#define MT8173_PIN_23_MSDC3_DAT1__FUNC_MSDC3_DAT1 (MTK_PIN_NO(23) | 1) + +#define MT8173_PIN_24_MSDC3_DAT2__FUNC_GPIO24 (MTK_PIN_NO(24) | 0) +#define MT8173_PIN_24_MSDC3_DAT2__FUNC_MSDC3_DAT2 (MTK_PIN_NO(24) | 1) + +#define MT8173_PIN_25_MSDC3_DAT3__FUNC_GPIO25 (MTK_PIN_NO(25) | 0) +#define MT8173_PIN_25_MSDC3_DAT3__FUNC_MSDC3_DAT3 (MTK_PIN_NO(25) | 1) + +#define MT8173_PIN_26_MSDC3_CLK__FUNC_GPIO26 (MTK_PIN_NO(26) | 0) +#define MT8173_PIN_26_MSDC3_CLK__FUNC_MSDC3_CLK (MTK_PIN_NO(26) | 1) + +#define MT8173_PIN_27_MSDC3_CMD__FUNC_GPIO27 (MTK_PIN_NO(27) | 0) +#define MT8173_PIN_27_MSDC3_CMD__FUNC_MSDC3_CMD (MTK_PIN_NO(27) | 1) + +#define MT8173_PIN_28_MSDC3_DSL__FUNC_GPIO28 (MTK_PIN_NO(28) | 0) +#define MT8173_PIN_28_MSDC3_DSL__FUNC_MSDC3_DSL (MTK_PIN_NO(28) | 1) + +#define MT8173_PIN_29_UCTS2__FUNC_GPIO29 (MTK_PIN_NO(29) | 0) +#define MT8173_PIN_29_UCTS2__FUNC_UCTS2 (MTK_PIN_NO(29) | 1) + +#define MT8173_PIN_30_URTS2__FUNC_GPIO30 (MTK_PIN_NO(30) | 0) +#define MT8173_PIN_30_URTS2__FUNC_URTS2 (MTK_PIN_NO(30) | 1) + +#define MT8173_PIN_31_URXD2__FUNC_GPIO31 (MTK_PIN_NO(31) | 0) +#define MT8173_PIN_31_URXD2__FUNC_URXD2 (MTK_PIN_NO(31) | 1) +#define MT8173_PIN_31_URXD2__FUNC_UTXD2 (MTK_PIN_NO(31) | 2) + +#define MT8173_PIN_32_UTXD2__FUNC_GPIO32 (MTK_PIN_NO(32) | 0) +#define MT8173_PIN_32_UTXD2__FUNC_UTXD2 (MTK_PIN_NO(32) | 1) +#define MT8173_PIN_32_UTXD2__FUNC_URXD2 (MTK_PIN_NO(32) | 2) + +#define MT8173_PIN_33_DAICLK__FUNC_GPIO33 (MTK_PIN_NO(33) | 0) +#define MT8173_PIN_33_DAICLK__FUNC_MRG_CLK (MTK_PIN_NO(33) | 1) +#define MT8173_PIN_33_DAICLK__FUNC_PCM0_CLK (MTK_PIN_NO(33) | 2) + +#define MT8173_PIN_34_DAIPCMIN__FUNC_GPIO34 (MTK_PIN_NO(34) | 0) +#define MT8173_PIN_34_DAIPCMIN__FUNC_MRG_DI (MTK_PIN_NO(34) | 1) +#define MT8173_PIN_34_DAIPCMIN__FUNC_PCM0_DI (MTK_PIN_NO(34) | 2) + +#define MT8173_PIN_35_DAIPCMOUT__FUNC_GPIO35 (MTK_PIN_NO(35) | 0) +#define MT8173_PIN_35_DAIPCMOUT__FUNC_MRG_DO (MTK_PIN_NO(35) | 1) +#define MT8173_PIN_35_DAIPCMOUT__FUNC_PCM0_DO (MTK_PIN_NO(35) | 2) + +#define MT8173_PIN_36_DAISYNC__FUNC_GPIO36 (MTK_PIN_NO(36) | 0) +#define MT8173_PIN_36_DAISYNC__FUNC_MRG_SYNC (MTK_PIN_NO(36) | 1) +#define MT8173_PIN_36_DAISYNC__FUNC_PCM0_SYNC (MTK_PIN_NO(36) | 2) + +#define MT8173_PIN_37_EINT16__FUNC_GPIO37 (MTK_PIN_NO(37) | 0) +#define MT8173_PIN_37_EINT16__FUNC_USB_DRVVBUS_P0 (MTK_PIN_NO(37) | 1) +#define MT8173_PIN_37_EINT16__FUNC_USB_DRVVBUS_P1 (MTK_PIN_NO(37) | 2) +#define MT8173_PIN_37_EINT16__FUNC_PWM0 (MTK_PIN_NO(37) | 3) +#define MT8173_PIN_37_EINT16__FUNC_PWM1 (MTK_PIN_NO(37) | 4) +#define MT8173_PIN_37_EINT16__FUNC_PWM2 (MTK_PIN_NO(37) | 5) +#define MT8173_PIN_37_EINT16__FUNC_CLKM0 (MTK_PIN_NO(37) | 6) + +#define MT8173_PIN_38_CONN_RST__FUNC_GPIO38 (MTK_PIN_NO(38) | 0) +#define MT8173_PIN_38_CONN_RST__FUNC_USB_DRVVBUS_P0 (MTK_PIN_NO(38) | 1) +#define MT8173_PIN_38_CONN_RST__FUNC_USB_DRVVBUS_P1 (MTK_PIN_NO(38) | 2) +#define MT8173_PIN_38_CONN_RST__FUNC_CLKM1 (MTK_PIN_NO(38) | 6) + +#define MT8173_PIN_39_CM2MCLK__FUNC_GPIO39 (MTK_PIN_NO(39) | 0) +#define MT8173_PIN_39_CM2MCLK__FUNC_CM2MCLK (MTK_PIN_NO(39) | 1) +#define MT8173_PIN_39_CM2MCLK__FUNC_CMCSD0 (MTK_PIN_NO(39) | 2) +#define MT8173_PIN_39_CM2MCLK__FUNC_DBG_MON_A_17_ (MTK_PIN_NO(39) | 7) + +#define MT8173_PIN_40_CMPCLK__FUNC_GPIO40 (MTK_PIN_NO(40) | 0) +#define MT8173_PIN_40_CMPCLK__FUNC_CMPCLK (MTK_PIN_NO(40) | 1) +#define MT8173_PIN_40_CMPCLK__FUNC_CMCSK (MTK_PIN_NO(40) | 2) +#define MT8173_PIN_40_CMPCLK__FUNC_CMCSD2 (MTK_PIN_NO(40) | 3) +#define MT8173_PIN_40_CMPCLK__FUNC_DBG_MON_A_18_ (MTK_PIN_NO(40) | 7) + +#define MT8173_PIN_41_CMMCLK__FUNC_GPIO41 (MTK_PIN_NO(41) | 0) +#define MT8173_PIN_41_CMMCLK__FUNC_CMMCLK (MTK_PIN_NO(41) | 1) +#define MT8173_PIN_41_CMMCLK__FUNC_DBG_MON_A_19_ (MTK_PIN_NO(41) | 7) + +#define MT8173_PIN_42_DSI_TE__FUNC_GPIO42 (MTK_PIN_NO(42) | 0) +#define MT8173_PIN_42_DSI_TE__FUNC_DSI_TE (MTK_PIN_NO(42) | 1) + +#define MT8173_PIN_43_SDA2__FUNC_GPIO43 (MTK_PIN_NO(43) | 0) +#define MT8173_PIN_43_SDA2__FUNC_SDA2 (MTK_PIN_NO(43) | 1) + +#define MT8173_PIN_44_SCL2__FUNC_GPIO44 (MTK_PIN_NO(44) | 0) +#define MT8173_PIN_44_SCL2__FUNC_SCL2 (MTK_PIN_NO(44) | 1) + +#define MT8173_PIN_45_SDA0__FUNC_GPIO45 (MTK_PIN_NO(45) | 0) +#define MT8173_PIN_45_SDA0__FUNC_SDA0 (MTK_PIN_NO(45) | 1) + +#define MT8173_PIN_46_SCL0__FUNC_GPIO46 (MTK_PIN_NO(46) | 0) +#define MT8173_PIN_46_SCL0__FUNC_SCL0 (MTK_PIN_NO(46) | 1) + +#define MT8173_PIN_47_RDN0_A__FUNC_GPIO47 (MTK_PIN_NO(47) | 0) +#define MT8173_PIN_47_RDN0_A__FUNC_CMDAT2 (MTK_PIN_NO(47) | 1) + +#define MT8173_PIN_48_RDP0_A__FUNC_GPIO48 (MTK_PIN_NO(48) | 0) +#define MT8173_PIN_48_RDP0_A__FUNC_CMDAT3 (MTK_PIN_NO(48) | 1) + +#define MT8173_PIN_49_RDN1_A__FUNC_GPIO49 (MTK_PIN_NO(49) | 0) +#define MT8173_PIN_49_RDN1_A__FUNC_CMDAT4 (MTK_PIN_NO(49) | 1) + +#define MT8173_PIN_50_RDP1_A__FUNC_GPIO50 (MTK_PIN_NO(50) | 0) +#define MT8173_PIN_50_RDP1_A__FUNC_CMDAT5 (MTK_PIN_NO(50) | 1) + +#define MT8173_PIN_51_RCN_A__FUNC_GPIO51 (MTK_PIN_NO(51) | 0) +#define MT8173_PIN_51_RCN_A__FUNC_CMDAT6 (MTK_PIN_NO(51) | 1) + +#define MT8173_PIN_52_RCP_A__FUNC_GPIO52 (MTK_PIN_NO(52) | 0) +#define MT8173_PIN_52_RCP_A__FUNC_CMDAT7 (MTK_PIN_NO(52) | 1) + +#define MT8173_PIN_53_RDN2_A__FUNC_GPIO53 (MTK_PIN_NO(53) | 0) +#define MT8173_PIN_53_RDN2_A__FUNC_CMDAT8 (MTK_PIN_NO(53) | 1) +#define MT8173_PIN_53_RDN2_A__FUNC_CMCSD3 (MTK_PIN_NO(53) | 2) + +#define MT8173_PIN_54_RDP2_A__FUNC_GPIO54 (MTK_PIN_NO(54) | 0) +#define MT8173_PIN_54_RDP2_A__FUNC_CMDAT9 (MTK_PIN_NO(54) | 1) +#define MT8173_PIN_54_RDP2_A__FUNC_CMCSD2 (MTK_PIN_NO(54) | 2) + +#define MT8173_PIN_55_RDN3_A__FUNC_GPIO55 (MTK_PIN_NO(55) | 0) +#define MT8173_PIN_55_RDN3_A__FUNC_CMHSYNC (MTK_PIN_NO(55) | 1) +#define MT8173_PIN_55_RDN3_A__FUNC_CMCSD1 (MTK_PIN_NO(55) | 2) + +#define MT8173_PIN_56_RDP3_A__FUNC_GPIO56 (MTK_PIN_NO(56) | 0) +#define MT8173_PIN_56_RDP3_A__FUNC_CMVSYNC (MTK_PIN_NO(56) | 1) +#define MT8173_PIN_56_RDP3_A__FUNC_CMCSD0 (MTK_PIN_NO(56) | 2) + +#define MT8173_PIN_57_MSDC0_DAT0__FUNC_GPIO57 (MTK_PIN_NO(57) | 0) +#define MT8173_PIN_57_MSDC0_DAT0__FUNC_MSDC0_DAT0 (MTK_PIN_NO(57) | 1) +#define MT8173_PIN_57_MSDC0_DAT0__FUNC_I2S1_WS (MTK_PIN_NO(57) | 2) +#define MT8173_PIN_57_MSDC0_DAT0__FUNC_DBG_MON_B_7_ (MTK_PIN_NO(57) | 7) + +#define MT8173_PIN_58_MSDC0_DAT1__FUNC_GPIO58 (MTK_PIN_NO(58) | 0) +#define MT8173_PIN_58_MSDC0_DAT1__FUNC_MSDC0_DAT1 (MTK_PIN_NO(58) | 1) +#define MT8173_PIN_58_MSDC0_DAT1__FUNC_I2S1_BCK (MTK_PIN_NO(58) | 2) +#define MT8173_PIN_58_MSDC0_DAT1__FUNC_DBG_MON_B_8_ (MTK_PIN_NO(58) | 7) + +#define MT8173_PIN_59_MSDC0_DAT2__FUNC_GPIO59 (MTK_PIN_NO(59) | 0) +#define MT8173_PIN_59_MSDC0_DAT2__FUNC_MSDC0_DAT2 (MTK_PIN_NO(59) | 1) +#define MT8173_PIN_59_MSDC0_DAT2__FUNC_I2S1_MCK (MTK_PIN_NO(59) | 2) +#define MT8173_PIN_59_MSDC0_DAT2__FUNC_DBG_MON_B_9_ (MTK_PIN_NO(59) | 7) + +#define MT8173_PIN_60_MSDC0_DAT3__FUNC_GPIO60 (MTK_PIN_NO(60) | 0) +#define MT8173_PIN_60_MSDC0_DAT3__FUNC_MSDC0_DAT3 (MTK_PIN_NO(60) | 1) +#define MT8173_PIN_60_MSDC0_DAT3__FUNC_I2S1_DO_1 (MTK_PIN_NO(60) | 2) +#define MT8173_PIN_60_MSDC0_DAT3__FUNC_DBG_MON_B_10_ (MTK_PIN_NO(60) | 7) + +#define MT8173_PIN_61_MSDC0_DAT4__FUNC_GPIO61 (MTK_PIN_NO(61) | 0) +#define MT8173_PIN_61_MSDC0_DAT4__FUNC_MSDC0_DAT4 (MTK_PIN_NO(61) | 1) +#define MT8173_PIN_61_MSDC0_DAT4__FUNC_I2S1_DO_2 (MTK_PIN_NO(61) | 2) +#define MT8173_PIN_61_MSDC0_DAT4__FUNC_DBG_MON_B_11_ (MTK_PIN_NO(61) | 7) + +#define MT8173_PIN_62_MSDC0_DAT5__FUNC_GPIO62 (MTK_PIN_NO(62) | 0) +#define MT8173_PIN_62_MSDC0_DAT5__FUNC_MSDC0_DAT5 (MTK_PIN_NO(62) | 1) +#define MT8173_PIN_62_MSDC0_DAT5__FUNC_I2S2_WS (MTK_PIN_NO(62) | 2) +#define MT8173_PIN_62_MSDC0_DAT5__FUNC_DBG_MON_B_12_ (MTK_PIN_NO(62) | 7) + +#define MT8173_PIN_63_MSDC0_DAT6__FUNC_GPIO63 (MTK_PIN_NO(63) | 0) +#define MT8173_PIN_63_MSDC0_DAT6__FUNC_MSDC0_DAT6 (MTK_PIN_NO(63) | 1) +#define MT8173_PIN_63_MSDC0_DAT6__FUNC_I2S2_BCK (MTK_PIN_NO(63) | 2) +#define MT8173_PIN_63_MSDC0_DAT6__FUNC_DBG_MON_B_13_ (MTK_PIN_NO(63) | 7) + +#define MT8173_PIN_64_MSDC0_DAT7__FUNC_GPIO64 (MTK_PIN_NO(64) | 0) +#define MT8173_PIN_64_MSDC0_DAT7__FUNC_MSDC0_DAT7 (MTK_PIN_NO(64) | 1) +#define MT8173_PIN_64_MSDC0_DAT7__FUNC_I2S2_DI_1 (MTK_PIN_NO(64) | 2) +#define MT8173_PIN_64_MSDC0_DAT7__FUNC_DBG_MON_B_14_ (MTK_PIN_NO(64) | 7) + +#define MT8173_PIN_65_MSDC0_CLK__FUNC_GPIO65 (MTK_PIN_NO(65) | 0) +#define MT8173_PIN_65_MSDC0_CLK__FUNC_MSDC0_CLK (MTK_PIN_NO(65) | 1) +#define MT8173_PIN_65_MSDC0_CLK__FUNC_DBG_MON_B_16_ (MTK_PIN_NO(65) | 7) + +#define MT8173_PIN_66_MSDC0_CMD__FUNC_GPIO66 (MTK_PIN_NO(66) | 0) +#define MT8173_PIN_66_MSDC0_CMD__FUNC_MSDC0_CMD (MTK_PIN_NO(66) | 1) +#define MT8173_PIN_66_MSDC0_CMD__FUNC_I2S2_DI_2 (MTK_PIN_NO(66) | 2) +#define MT8173_PIN_66_MSDC0_CMD__FUNC_DBG_MON_B_15_ (MTK_PIN_NO(66) | 7) + +#define MT8173_PIN_67_MSDC0_DSL__FUNC_GPIO67 (MTK_PIN_NO(67) | 0) +#define MT8173_PIN_67_MSDC0_DSL__FUNC_MSDC0_DSL (MTK_PIN_NO(67) | 1) +#define MT8173_PIN_67_MSDC0_DSL__FUNC_DBG_MON_B_17_ (MTK_PIN_NO(67) | 7) + +#define MT8173_PIN_68_MSDC0_RST___FUNC_GPIO68 (MTK_PIN_NO(68) | 0) +#define MT8173_PIN_68_MSDC0_RST___FUNC_MSDC0_RSTB (MTK_PIN_NO(68) | 1) +#define MT8173_PIN_68_MSDC0_RST___FUNC_I2S2_MCK (MTK_PIN_NO(68) | 2) +#define MT8173_PIN_68_MSDC0_RST___FUNC_DBG_MON_B_18_ (MTK_PIN_NO(68) | 7) + +#define MT8173_PIN_69_SPI_CK__FUNC_GPIO69 (MTK_PIN_NO(69) | 0) +#define MT8173_PIN_69_SPI_CK__FUNC_SPI_CK_0_ (MTK_PIN_NO(69) | 1) +#define MT8173_PIN_69_SPI_CK__FUNC_I2S3_DO_1 (MTK_PIN_NO(69) | 2) +#define MT8173_PIN_69_SPI_CK__FUNC_PWM0 (MTK_PIN_NO(69) | 3) +#define MT8173_PIN_69_SPI_CK__FUNC_PWM5 (MTK_PIN_NO(69) | 4) +#define MT8173_PIN_69_SPI_CK__FUNC_I2S2_MCK (MTK_PIN_NO(69) | 5) +#define MT8173_PIN_69_SPI_CK__FUNC_DBG_MON_B_19_ (MTK_PIN_NO(69) | 7) + +#define MT8173_PIN_70_SPI_MI__FUNC_GPIO70 (MTK_PIN_NO(70) | 0) +#define MT8173_PIN_70_SPI_MI__FUNC_SPI_MI_0_ (MTK_PIN_NO(70) | 1) +#define MT8173_PIN_70_SPI_MI__FUNC_I2S3_DO_2 (MTK_PIN_NO(70) | 2) +#define MT8173_PIN_70_SPI_MI__FUNC_PWM1 (MTK_PIN_NO(70) | 3) +#define MT8173_PIN_70_SPI_MI__FUNC_SPI_MO_0_ (MTK_PIN_NO(70) | 4) +#define MT8173_PIN_70_SPI_MI__FUNC_I2S2_DI_1 (MTK_PIN_NO(70) | 5) +#define MT8173_PIN_70_SPI_MI__FUNC_DSI1_TE (MTK_PIN_NO(70) | 6) +#define MT8173_PIN_70_SPI_MI__FUNC_DBG_MON_B_20_ (MTK_PIN_NO(70) | 7) + +#define MT8173_PIN_71_SPI_MO__FUNC_GPIO71 (MTK_PIN_NO(71) | 0) +#define MT8173_PIN_71_SPI_MO__FUNC_SPI_MO_0_ (MTK_PIN_NO(71) | 1) +#define MT8173_PIN_71_SPI_MO__FUNC_I2S3_DO_3 (MTK_PIN_NO(71) | 2) +#define MT8173_PIN_71_SPI_MO__FUNC_PWM2 (MTK_PIN_NO(71) | 3) +#define MT8173_PIN_71_SPI_MO__FUNC_SPI_MI_0_ (MTK_PIN_NO(71) | 4) +#define MT8173_PIN_71_SPI_MO__FUNC_I2S2_DI_2 (MTK_PIN_NO(71) | 5) +#define MT8173_PIN_71_SPI_MO__FUNC_DBG_MON_B_21_ (MTK_PIN_NO(71) | 7) + +#define MT8173_PIN_72_SPI_CS__FUNC_GPIO72 (MTK_PIN_NO(72) | 0) +#define MT8173_PIN_72_SPI_CS__FUNC_SPI_CS_0_ (MTK_PIN_NO(72) | 1) +#define MT8173_PIN_72_SPI_CS__FUNC_I2S3_DO_4 (MTK_PIN_NO(72) | 2) +#define MT8173_PIN_72_SPI_CS__FUNC_PWM3 (MTK_PIN_NO(72) | 3) +#define MT8173_PIN_72_SPI_CS__FUNC_PWM6 (MTK_PIN_NO(72) | 4) +#define MT8173_PIN_72_SPI_CS__FUNC_DISP_PWM1 (MTK_PIN_NO(72) | 5) +#define MT8173_PIN_72_SPI_CS__FUNC_DBG_MON_B_22_ (MTK_PIN_NO(72) | 7) + +#define MT8173_PIN_73_MSDC1_DAT0__FUNC_GPIO73 (MTK_PIN_NO(73) | 0) +#define MT8173_PIN_73_MSDC1_DAT0__FUNC_MSDC1_DAT0 (MTK_PIN_NO(73) | 1) +#define MT8173_PIN_73_MSDC1_DAT0__FUNC_DBG_MON_B_24_ (MTK_PIN_NO(73) | 7) + +#define MT8173_PIN_74_MSDC1_DAT1__FUNC_GPIO74 (MTK_PIN_NO(74) | 0) +#define MT8173_PIN_74_MSDC1_DAT1__FUNC_MSDC1_DAT1 (MTK_PIN_NO(74) | 1) +#define MT8173_PIN_74_MSDC1_DAT1__FUNC_DBG_MON_B_25_ (MTK_PIN_NO(74) | 7) + +#define MT8173_PIN_75_MSDC1_DAT2__FUNC_GPIO75 (MTK_PIN_NO(75) | 0) +#define MT8173_PIN_75_MSDC1_DAT2__FUNC_MSDC1_DAT2 (MTK_PIN_NO(75) | 1) +#define MT8173_PIN_75_MSDC1_DAT2__FUNC_DBG_MON_B_26_ (MTK_PIN_NO(75) | 7) + +#define MT8173_PIN_76_MSDC1_DAT3__FUNC_GPIO76 (MTK_PIN_NO(76) | 0) +#define MT8173_PIN_76_MSDC1_DAT3__FUNC_MSDC1_DAT3 (MTK_PIN_NO(76) | 1) +#define MT8173_PIN_76_MSDC1_DAT3__FUNC_DBG_MON_B_27_ (MTK_PIN_NO(76) | 7) + +#define MT8173_PIN_77_MSDC1_CLK__FUNC_GPIO77 (MTK_PIN_NO(77) | 0) +#define MT8173_PIN_77_MSDC1_CLK__FUNC_MSDC1_CLK (MTK_PIN_NO(77) | 1) +#define MT8173_PIN_77_MSDC1_CLK__FUNC_DBG_MON_B_28_ (MTK_PIN_NO(77) | 7) + +#define MT8173_PIN_78_MSDC1_CMD__FUNC_GPIO78 (MTK_PIN_NO(78) | 0) +#define MT8173_PIN_78_MSDC1_CMD__FUNC_MSDC1_CMD (MTK_PIN_NO(78) | 1) +#define MT8173_PIN_78_MSDC1_CMD__FUNC_DBG_MON_B_23_ (MTK_PIN_NO(78) | 7) + +#define MT8173_PIN_79_PWRAP_SPI0_MI__FUNC_GPIO79 (MTK_PIN_NO(79) | 0) +#define MT8173_PIN_79_PWRAP_SPI0_MI__FUNC_PWRAP_SPIMI (MTK_PIN_NO(79) | 1) +#define MT8173_PIN_79_PWRAP_SPI0_MI__FUNC_PWRAP_SPIMO (MTK_PIN_NO(79) | 2) + +#define MT8173_PIN_80_PWRAP_SPI0_MO__FUNC_GPIO80 (MTK_PIN_NO(80) | 0) +#define MT8173_PIN_80_PWRAP_SPI0_MO__FUNC_PWRAP_SPIMO (MTK_PIN_NO(80) | 1) +#define MT8173_PIN_80_PWRAP_SPI0_MO__FUNC_PWRAP_SPIMI (MTK_PIN_NO(80) | 2) + +#define MT8173_PIN_81_PWRAP_SPI0_CK__FUNC_GPIO81 (MTK_PIN_NO(81) | 0) +#define MT8173_PIN_81_PWRAP_SPI0_CK__FUNC_PWRAP_SPICK (MTK_PIN_NO(81) | 1) + +#define MT8173_PIN_82_PWRAP_SPI0_CSN__FUNC_GPIO82 (MTK_PIN_NO(82) | 0) +#define MT8173_PIN_82_PWRAP_SPI0_CSN__FUNC_PWRAP_SPICS (MTK_PIN_NO(82) | 1) + +#define MT8173_PIN_83_AUD_CLK_MOSI__FUNC_GPIO83 (MTK_PIN_NO(83) | 0) +#define MT8173_PIN_83_AUD_CLK_MOSI__FUNC_AUD_CLK_MOSI (MTK_PIN_NO(83) | 1) + +#define MT8173_PIN_84_AUD_DAT_MISO__FUNC_GPIO84 (MTK_PIN_NO(84) | 0) +#define MT8173_PIN_84_AUD_DAT_MISO__FUNC_AUD_DAT_MISO (MTK_PIN_NO(84) | 1) +#define MT8173_PIN_84_AUD_DAT_MISO__FUNC_AUD_DAT_MOSI (MTK_PIN_NO(84) | 2) + +#define MT8173_PIN_85_AUD_DAT_MOSI__FUNC_GPIO85 (MTK_PIN_NO(85) | 0) +#define MT8173_PIN_85_AUD_DAT_MOSI__FUNC_AUD_DAT_MOSI (MTK_PIN_NO(85) | 1) +#define MT8173_PIN_85_AUD_DAT_MOSI__FUNC_AUD_DAT_MISO (MTK_PIN_NO(85) | 2) + +#define MT8173_PIN_86_RTC32K_CK__FUNC_GPIO86 (MTK_PIN_NO(86) | 0) +#define MT8173_PIN_86_RTC32K_CK__FUNC_RTC32K_CK (MTK_PIN_NO(86) | 1) + +#define MT8173_PIN_87_DISP_PWM0__FUNC_GPIO87 (MTK_PIN_NO(87) | 0) +#define MT8173_PIN_87_DISP_PWM0__FUNC_DISP_PWM0 (MTK_PIN_NO(87) | 1) +#define MT8173_PIN_87_DISP_PWM0__FUNC_DISP_PWM1 (MTK_PIN_NO(87) | 2) +#define MT8173_PIN_87_DISP_PWM0__FUNC_DBG_MON_B_31_ (MTK_PIN_NO(87) | 7) + +#define MT8173_PIN_88_SRCLKENAI__FUNC_GPIO88 (MTK_PIN_NO(88) | 0) +#define MT8173_PIN_88_SRCLKENAI__FUNC_SRCLKENAI (MTK_PIN_NO(88) | 1) + +#define MT8173_PIN_89_SRCLKENAI2__FUNC_GPIO89 (MTK_PIN_NO(89) | 0) +#define MT8173_PIN_89_SRCLKENAI2__FUNC_SRCLKENAI2 (MTK_PIN_NO(89) | 1) + +#define MT8173_PIN_90_SRCLKENA0__FUNC_GPIO90 (MTK_PIN_NO(90) | 0) +#define MT8173_PIN_90_SRCLKENA0__FUNC_SRCLKENA0 (MTK_PIN_NO(90) | 1) + +#define MT8173_PIN_91_SRCLKENA1__FUNC_GPIO91 (MTK_PIN_NO(91) | 0) +#define MT8173_PIN_91_SRCLKENA1__FUNC_SRCLKENA1 (MTK_PIN_NO(91) | 1) + +#define MT8173_PIN_92_PCM_CLK__FUNC_GPIO92 (MTK_PIN_NO(92) | 0) +#define MT8173_PIN_92_PCM_CLK__FUNC_PCM1_CLK (MTK_PIN_NO(92) | 1) +#define MT8173_PIN_92_PCM_CLK__FUNC_I2S0_BCK (MTK_PIN_NO(92) | 2) +#define MT8173_PIN_92_PCM_CLK__FUNC_DBG_MON_A_24_ (MTK_PIN_NO(92) | 7) + +#define MT8173_PIN_93_PCM_SYNC__FUNC_GPIO93 (MTK_PIN_NO(93) | 0) +#define MT8173_PIN_93_PCM_SYNC__FUNC_PCM1_SYNC (MTK_PIN_NO(93) | 1) +#define MT8173_PIN_93_PCM_SYNC__FUNC_I2S0_WS (MTK_PIN_NO(93) | 2) +#define MT8173_PIN_93_PCM_SYNC__FUNC_DBG_MON_A_25_ (MTK_PIN_NO(93) | 7) + +#define MT8173_PIN_94_PCM_RX__FUNC_GPIO94 (MTK_PIN_NO(94) | 0) +#define MT8173_PIN_94_PCM_RX__FUNC_PCM1_DI (MTK_PIN_NO(94) | 1) +#define MT8173_PIN_94_PCM_RX__FUNC_I2S0_DI (MTK_PIN_NO(94) | 2) +#define MT8173_PIN_94_PCM_RX__FUNC_DBG_MON_A_26_ (MTK_PIN_NO(94) | 7) + +#define MT8173_PIN_95_PCM_TX__FUNC_GPIO95 (MTK_PIN_NO(95) | 0) +#define MT8173_PIN_95_PCM_TX__FUNC_PCM1_DO (MTK_PIN_NO(95) | 1) +#define MT8173_PIN_95_PCM_TX__FUNC_I2S0_DO (MTK_PIN_NO(95) | 2) +#define MT8173_PIN_95_PCM_TX__FUNC_DBG_MON_A_27_ (MTK_PIN_NO(95) | 7) + +#define MT8173_PIN_96_URXD1__FUNC_GPIO96 (MTK_PIN_NO(96) | 0) +#define MT8173_PIN_96_URXD1__FUNC_URXD1 (MTK_PIN_NO(96) | 1) +#define MT8173_PIN_96_URXD1__FUNC_UTXD1 (MTK_PIN_NO(96) | 2) +#define MT8173_PIN_96_URXD1__FUNC_DBG_MON_A_28_ (MTK_PIN_NO(96) | 7) + +#define MT8173_PIN_97_UTXD1__FUNC_GPIO97 (MTK_PIN_NO(97) | 0) +#define MT8173_PIN_97_UTXD1__FUNC_UTXD1 (MTK_PIN_NO(97) | 1) +#define MT8173_PIN_97_UTXD1__FUNC_URXD1 (MTK_PIN_NO(97) | 2) +#define MT8173_PIN_97_UTXD1__FUNC_DBG_MON_A_29_ (MTK_PIN_NO(97) | 7) + +#define MT8173_PIN_98_URTS1__FUNC_GPIO98 (MTK_PIN_NO(98) | 0) +#define MT8173_PIN_98_URTS1__FUNC_URTS1 (MTK_PIN_NO(98) | 1) +#define MT8173_PIN_98_URTS1__FUNC_UCTS1 (MTK_PIN_NO(98) | 2) +#define MT8173_PIN_98_URTS1__FUNC_DBG_MON_A_30_ (MTK_PIN_NO(98) | 7) + +#define MT8173_PIN_99_UCTS1__FUNC_GPIO99 (MTK_PIN_NO(99) | 0) +#define MT8173_PIN_99_UCTS1__FUNC_UCTS1 (MTK_PIN_NO(99) | 1) +#define MT8173_PIN_99_UCTS1__FUNC_URTS1 (MTK_PIN_NO(99) | 2) +#define MT8173_PIN_99_UCTS1__FUNC_DBG_MON_A_31_ (MTK_PIN_NO(99) | 7) + +#define MT8173_PIN_100_MSDC2_DAT0__FUNC_GPIO100 (MTK_PIN_NO(100) | 0) +#define MT8173_PIN_100_MSDC2_DAT0__FUNC_MSDC2_DAT0 (MTK_PIN_NO(100) | 1) +#define MT8173_PIN_100_MSDC2_DAT0__FUNC_USB_DRVVBUS_P0 (MTK_PIN_NO(100) | 3) +#define MT8173_PIN_100_MSDC2_DAT0__FUNC_SDA5 (MTK_PIN_NO(100) | 4) +#define MT8173_PIN_100_MSDC2_DAT0__FUNC_USB_DRVVBUS_P1 (MTK_PIN_NO(100) | 5) +#define MT8173_PIN_100_MSDC2_DAT0__FUNC_DBG_MON_B_0_ (MTK_PIN_NO(100) | 7) + +#define MT8173_PIN_101_MSDC2_DAT1__FUNC_GPIO101 (MTK_PIN_NO(101) | 0) +#define MT8173_PIN_101_MSDC2_DAT1__FUNC_MSDC2_DAT1 (MTK_PIN_NO(101) | 1) +#define MT8173_PIN_101_MSDC2_DAT1__FUNC_AUD_SPDIF (MTK_PIN_NO(101) | 3) +#define MT8173_PIN_101_MSDC2_DAT1__FUNC_SCL5 (MTK_PIN_NO(101) | 4) +#define MT8173_PIN_101_MSDC2_DAT1__FUNC_DBG_MON_B_1_ (MTK_PIN_NO(101) | 7) + +#define MT8173_PIN_102_MSDC2_DAT2__FUNC_GPIO102 (MTK_PIN_NO(102) | 0) +#define MT8173_PIN_102_MSDC2_DAT2__FUNC_MSDC2_DAT2 (MTK_PIN_NO(102) | 1) +#define MT8173_PIN_102_MSDC2_DAT2__FUNC_UTXD0 (MTK_PIN_NO(102) | 3) +#define MT8173_PIN_102_MSDC2_DAT2__FUNC_PWM0 (MTK_PIN_NO(102) | 5) +#define MT8173_PIN_102_MSDC2_DAT2__FUNC_SPI_CK_1_ (MTK_PIN_NO(102) | 6) +#define MT8173_PIN_102_MSDC2_DAT2__FUNC_DBG_MON_B_2_ (MTK_PIN_NO(102) | 7) + +#define MT8173_PIN_103_MSDC2_DAT3__FUNC_GPIO103 (MTK_PIN_NO(103) | 0) +#define MT8173_PIN_103_MSDC2_DAT3__FUNC_MSDC2_DAT3 (MTK_PIN_NO(103) | 1) +#define MT8173_PIN_103_MSDC2_DAT3__FUNC_URXD0 (MTK_PIN_NO(103) | 3) +#define MT8173_PIN_103_MSDC2_DAT3__FUNC_PWM1 (MTK_PIN_NO(103) | 5) +#define MT8173_PIN_103_MSDC2_DAT3__FUNC_SPI_MI_1_ (MTK_PIN_NO(103) | 6) +#define MT8173_PIN_103_MSDC2_DAT3__FUNC_DBG_MON_B_3_ (MTK_PIN_NO(103) | 7) + +#define MT8173_PIN_104_MSDC2_CLK__FUNC_GPIO104 (MTK_PIN_NO(104) | 0) +#define MT8173_PIN_104_MSDC2_CLK__FUNC_MSDC2_CLK (MTK_PIN_NO(104) | 1) +#define MT8173_PIN_104_MSDC2_CLK__FUNC_UTXD3 (MTK_PIN_NO(104) | 3) +#define MT8173_PIN_104_MSDC2_CLK__FUNC_SDA3 (MTK_PIN_NO(104) | 4) +#define MT8173_PIN_104_MSDC2_CLK__FUNC_PWM2 (MTK_PIN_NO(104) | 5) +#define MT8173_PIN_104_MSDC2_CLK__FUNC_SPI_MO_1_ (MTK_PIN_NO(104) | 6) +#define MT8173_PIN_104_MSDC2_CLK__FUNC_DBG_MON_B_4_ (MTK_PIN_NO(104) | 7) + +#define MT8173_PIN_105_MSDC2_CMD__FUNC_GPIO105 (MTK_PIN_NO(105) | 0) +#define MT8173_PIN_105_MSDC2_CMD__FUNC_MSDC2_CMD (MTK_PIN_NO(105) | 1) +#define MT8173_PIN_105_MSDC2_CMD__FUNC_URXD3 (MTK_PIN_NO(105) | 3) +#define MT8173_PIN_105_MSDC2_CMD__FUNC_SCL3 (MTK_PIN_NO(105) | 4) +#define MT8173_PIN_105_MSDC2_CMD__FUNC_PWM3 (MTK_PIN_NO(105) | 5) +#define MT8173_PIN_105_MSDC2_CMD__FUNC_SPI_CS_1_ (MTK_PIN_NO(105) | 6) +#define MT8173_PIN_105_MSDC2_CMD__FUNC_DBG_MON_B_5_ (MTK_PIN_NO(105) | 7) + +#define MT8173_PIN_106_SDA3__FUNC_GPIO106 (MTK_PIN_NO(106) | 0) +#define MT8173_PIN_106_SDA3__FUNC_SDA3 (MTK_PIN_NO(106) | 1) + +#define MT8173_PIN_107_SCL3__FUNC_GPIO107 (MTK_PIN_NO(107) | 0) +#define MT8173_PIN_107_SCL3__FUNC_SCL3 (MTK_PIN_NO(107) | 1) + +#define MT8173_PIN_108_JTMS__FUNC_GPIO108 (MTK_PIN_NO(108) | 0) +#define MT8173_PIN_108_JTMS__FUNC_JTMS (MTK_PIN_NO(108) | 1) +#define MT8173_PIN_108_JTMS__FUNC_MFG_JTAG_TMS (MTK_PIN_NO(108) | 2) +#define MT8173_PIN_108_JTMS__FUNC_AP_MD32_JTAG_TMS (MTK_PIN_NO(108) | 5) +#define MT8173_PIN_108_JTMS__FUNC_DFD_TMS (MTK_PIN_NO(108) | 6) + +#define MT8173_PIN_109_JTCK__FUNC_GPIO109 (MTK_PIN_NO(109) | 0) +#define MT8173_PIN_109_JTCK__FUNC_JTCK (MTK_PIN_NO(109) | 1) +#define MT8173_PIN_109_JTCK__FUNC_MFG_JTAG_TCK (MTK_PIN_NO(109) | 2) +#define MT8173_PIN_109_JTCK__FUNC_AP_MD32_JTAG_TCK (MTK_PIN_NO(109) | 5) +#define MT8173_PIN_109_JTCK__FUNC_DFD_TCK (MTK_PIN_NO(109) | 6) + +#define MT8173_PIN_110_JTDI__FUNC_GPIO110 (MTK_PIN_NO(110) | 0) +#define MT8173_PIN_110_JTDI__FUNC_JTDI (MTK_PIN_NO(110) | 1) +#define MT8173_PIN_110_JTDI__FUNC_MFG_JTAG_TDI (MTK_PIN_NO(110) | 2) +#define MT8173_PIN_110_JTDI__FUNC_AP_MD32_JTAG_TDI (MTK_PIN_NO(110) | 5) +#define MT8173_PIN_110_JTDI__FUNC_DFD_TDI (MTK_PIN_NO(110) | 6) + +#define MT8173_PIN_111_JTDO__FUNC_GPIO111 (MTK_PIN_NO(111) | 0) +#define MT8173_PIN_111_JTDO__FUNC_JTDO (MTK_PIN_NO(111) | 1) +#define MT8173_PIN_111_JTDO__FUNC_MFG_JTAG_TDO (MTK_PIN_NO(111) | 2) +#define MT8173_PIN_111_JTDO__FUNC_AP_MD32_JTAG_TDO (MTK_PIN_NO(111) | 5) +#define MT8173_PIN_111_JTDO__FUNC_DFD_TDO (MTK_PIN_NO(111) | 6) + +#define MT8173_PIN_112_JTRST_B__FUNC_GPIO112 (MTK_PIN_NO(112) | 0) +#define MT8173_PIN_112_JTRST_B__FUNC_JTRST_B (MTK_PIN_NO(112) | 1) +#define MT8173_PIN_112_JTRST_B__FUNC_MFG_JTAG_TRSTN (MTK_PIN_NO(112) | 2) +#define MT8173_PIN_112_JTRST_B__FUNC_AP_MD32_JTAG_TRST (MTK_PIN_NO(112) | 5) +#define MT8173_PIN_112_JTRST_B__FUNC_DFD_NTRST (MTK_PIN_NO(112) | 6) + +#define MT8173_PIN_113_URXD0__FUNC_GPIO113 (MTK_PIN_NO(113) | 0) +#define MT8173_PIN_113_URXD0__FUNC_URXD0 (MTK_PIN_NO(113) | 1) +#define MT8173_PIN_113_URXD0__FUNC_UTXD0 (MTK_PIN_NO(113) | 2) +#define MT8173_PIN_113_URXD0__FUNC_I2S2_WS (MTK_PIN_NO(113) | 6) +#define MT8173_PIN_113_URXD0__FUNC_DBG_MON_A_0_ (MTK_PIN_NO(113) | 7) + +#define MT8173_PIN_114_UTXD0__FUNC_GPIO114 (MTK_PIN_NO(114) | 0) +#define MT8173_PIN_114_UTXD0__FUNC_UTXD0 (MTK_PIN_NO(114) | 1) +#define MT8173_PIN_114_UTXD0__FUNC_URXD0 (MTK_PIN_NO(114) | 2) +#define MT8173_PIN_114_UTXD0__FUNC_I2S2_BCK (MTK_PIN_NO(114) | 6) +#define MT8173_PIN_114_UTXD0__FUNC_DBG_MON_A_1_ (MTK_PIN_NO(114) | 7) + +#define MT8173_PIN_115_URTS0__FUNC_GPIO115 (MTK_PIN_NO(115) | 0) +#define MT8173_PIN_115_URTS0__FUNC_URTS0 (MTK_PIN_NO(115) | 1) +#define MT8173_PIN_115_URTS0__FUNC_UCTS0 (MTK_PIN_NO(115) | 2) +#define MT8173_PIN_115_URTS0__FUNC_I2S2_MCK (MTK_PIN_NO(115) | 6) +#define MT8173_PIN_115_URTS0__FUNC_DBG_MON_A_2_ (MTK_PIN_NO(115) | 7) + +#define MT8173_PIN_116_UCTS0__FUNC_GPIO116 (MTK_PIN_NO(116) | 0) +#define MT8173_PIN_116_UCTS0__FUNC_UCTS0 (MTK_PIN_NO(116) | 1) +#define MT8173_PIN_116_UCTS0__FUNC_URTS0 (MTK_PIN_NO(116) | 2) +#define MT8173_PIN_116_UCTS0__FUNC_I2S2_DI_1 (MTK_PIN_NO(116) | 6) +#define MT8173_PIN_116_UCTS0__FUNC_DBG_MON_A_3_ (MTK_PIN_NO(116) | 7) + +#define MT8173_PIN_117_URXD3__FUNC_GPIO117 (MTK_PIN_NO(117) | 0) +#define MT8173_PIN_117_URXD3__FUNC_URXD3 (MTK_PIN_NO(117) | 1) +#define MT8173_PIN_117_URXD3__FUNC_UTXD3 (MTK_PIN_NO(117) | 2) +#define MT8173_PIN_117_URXD3__FUNC_DBG_MON_A_9_ (MTK_PIN_NO(117) | 7) + +#define MT8173_PIN_118_UTXD3__FUNC_GPIO118 (MTK_PIN_NO(118) | 0) +#define MT8173_PIN_118_UTXD3__FUNC_UTXD3 (MTK_PIN_NO(118) | 1) +#define MT8173_PIN_118_UTXD3__FUNC_URXD3 (MTK_PIN_NO(118) | 2) +#define MT8173_PIN_118_UTXD3__FUNC_DBG_MON_A_10_ (MTK_PIN_NO(118) | 7) + +#define MT8173_PIN_119_KPROW0__FUNC_GPIO119 (MTK_PIN_NO(119) | 0) +#define MT8173_PIN_119_KPROW0__FUNC_KROW0 (MTK_PIN_NO(119) | 1) +#define MT8173_PIN_119_KPROW0__FUNC_DBG_MON_A_11_ (MTK_PIN_NO(119) | 7) + +#define MT8173_PIN_120_KPROW1__FUNC_GPIO120 (MTK_PIN_NO(120) | 0) +#define MT8173_PIN_120_KPROW1__FUNC_KROW1 (MTK_PIN_NO(120) | 1) +#define MT8173_PIN_120_KPROW1__FUNC_PWM6 (MTK_PIN_NO(120) | 3) +#define MT8173_PIN_120_KPROW1__FUNC_DBG_MON_A_12_ (MTK_PIN_NO(120) | 7) + +#define MT8173_PIN_121_KPROW2__FUNC_GPIO121 (MTK_PIN_NO(121) | 0) +#define MT8173_PIN_121_KPROW2__FUNC_KROW2 (MTK_PIN_NO(121) | 1) +#define MT8173_PIN_121_KPROW2__FUNC_IRDA_PDN (MTK_PIN_NO(121) | 2) +#define MT8173_PIN_121_KPROW2__FUNC_USB_DRVVBUS_P0 (MTK_PIN_NO(121) | 3) +#define MT8173_PIN_121_KPROW2__FUNC_PWM4 (MTK_PIN_NO(121) | 4) +#define MT8173_PIN_121_KPROW2__FUNC_USB_DRVVBUS_P1 (MTK_PIN_NO(121) | 5) +#define MT8173_PIN_121_KPROW2__FUNC_DBG_MON_A_13_ (MTK_PIN_NO(121) | 7) + +#define MT8173_PIN_122_KPCOL0__FUNC_GPIO122 (MTK_PIN_NO(122) | 0) +#define MT8173_PIN_122_KPCOL0__FUNC_KCOL0 (MTK_PIN_NO(122) | 1) +#define MT8173_PIN_122_KPCOL0__FUNC_DBG_MON_A_14_ (MTK_PIN_NO(122) | 7) + +#define MT8173_PIN_123_KPCOL1__FUNC_GPIO123 (MTK_PIN_NO(123) | 0) +#define MT8173_PIN_123_KPCOL1__FUNC_KCOL1 (MTK_PIN_NO(123) | 1) +#define MT8173_PIN_123_KPCOL1__FUNC_IRDA_RXD (MTK_PIN_NO(123) | 2) +#define MT8173_PIN_123_KPCOL1__FUNC_PWM5 (MTK_PIN_NO(123) | 3) +#define MT8173_PIN_123_KPCOL1__FUNC_DBG_MON_A_15_ (MTK_PIN_NO(123) | 7) + +#define MT8173_PIN_124_KPCOL2__FUNC_GPIO124 (MTK_PIN_NO(124) | 0) +#define MT8173_PIN_124_KPCOL2__FUNC_KCOL2 (MTK_PIN_NO(124) | 1) +#define MT8173_PIN_124_KPCOL2__FUNC_IRDA_TXD (MTK_PIN_NO(124) | 2) +#define MT8173_PIN_124_KPCOL2__FUNC_USB_DRVVBUS_P0 (MTK_PIN_NO(124) | 3) +#define MT8173_PIN_124_KPCOL2__FUNC_PWM3 (MTK_PIN_NO(124) | 4) +#define MT8173_PIN_124_KPCOL2__FUNC_USB_DRVVBUS_P1 (MTK_PIN_NO(124) | 5) +#define MT8173_PIN_124_KPCOL2__FUNC_DBG_MON_A_16_ (MTK_PIN_NO(124) | 7) + +#define MT8173_PIN_125_SDA1__FUNC_GPIO125 (MTK_PIN_NO(125) | 0) +#define MT8173_PIN_125_SDA1__FUNC_SDA1 (MTK_PIN_NO(125) | 1) + +#define MT8173_PIN_126_SCL1__FUNC_GPIO126 (MTK_PIN_NO(126) | 0) +#define MT8173_PIN_126_SCL1__FUNC_SCL1 (MTK_PIN_NO(126) | 1) + +#define MT8173_PIN_127_LCM_RST__FUNC_GPIO127 (MTK_PIN_NO(127) | 0) +#define MT8173_PIN_127_LCM_RST__FUNC_LCM_RST (MTK_PIN_NO(127) | 1) + +#define MT8173_PIN_128_I2S0_LRCK__FUNC_GPIO128 (MTK_PIN_NO(128) | 0) +#define MT8173_PIN_128_I2S0_LRCK__FUNC_I2S0_WS (MTK_PIN_NO(128) | 1) +#define MT8173_PIN_128_I2S0_LRCK__FUNC_I2S1_WS (MTK_PIN_NO(128) | 2) +#define MT8173_PIN_128_I2S0_LRCK__FUNC_I2S2_WS (MTK_PIN_NO(128) | 3) +#define MT8173_PIN_128_I2S0_LRCK__FUNC_SPI_CK_2_ (MTK_PIN_NO(128) | 5) +#define MT8173_PIN_128_I2S0_LRCK__FUNC_DBG_MON_A_4_ (MTK_PIN_NO(128) | 7) + +#define MT8173_PIN_129_I2S0_BCK__FUNC_GPIO129 (MTK_PIN_NO(129) | 0) +#define MT8173_PIN_129_I2S0_BCK__FUNC_I2S0_BCK (MTK_PIN_NO(129) | 1) +#define MT8173_PIN_129_I2S0_BCK__FUNC_I2S1_BCK (MTK_PIN_NO(129) | 2) +#define MT8173_PIN_129_I2S0_BCK__FUNC_I2S2_BCK (MTK_PIN_NO(129) | 3) +#define MT8173_PIN_129_I2S0_BCK__FUNC_SPI_MI_2_ (MTK_PIN_NO(129) | 5) +#define MT8173_PIN_129_I2S0_BCK__FUNC_DBG_MON_A_5_ (MTK_PIN_NO(129) | 7) + +#define MT8173_PIN_130_I2S0_MCK__FUNC_GPIO130 (MTK_PIN_NO(130) | 0) +#define MT8173_PIN_130_I2S0_MCK__FUNC_I2S0_MCK (MTK_PIN_NO(130) | 1) +#define MT8173_PIN_130_I2S0_MCK__FUNC_I2S1_MCK (MTK_PIN_NO(130) | 2) +#define MT8173_PIN_130_I2S0_MCK__FUNC_I2S2_MCK (MTK_PIN_NO(130) | 3) +#define MT8173_PIN_130_I2S0_MCK__FUNC_SPI_MO_2_ (MTK_PIN_NO(130) | 5) +#define MT8173_PIN_130_I2S0_MCK__FUNC_DBG_MON_A_6_ (MTK_PIN_NO(130) | 7) + +#define MT8173_PIN_131_I2S0_DATA0__FUNC_GPIO131 (MTK_PIN_NO(131) | 0) +#define MT8173_PIN_131_I2S0_DATA0__FUNC_I2S0_DO (MTK_PIN_NO(131) | 1) +#define MT8173_PIN_131_I2S0_DATA0__FUNC_I2S1_DO_1 (MTK_PIN_NO(131) | 2) +#define MT8173_PIN_131_I2S0_DATA0__FUNC_I2S2_DI_1 (MTK_PIN_NO(131) | 3) +#define MT8173_PIN_131_I2S0_DATA0__FUNC_SPI_CS_2_ (MTK_PIN_NO(131) | 5) +#define MT8173_PIN_131_I2S0_DATA0__FUNC_DBG_MON_A_7_ (MTK_PIN_NO(131) | 7) + +#define MT8173_PIN_132_I2S0_DATA1__FUNC_GPIO132 (MTK_PIN_NO(132) | 0) +#define MT8173_PIN_132_I2S0_DATA1__FUNC_I2S0_DI (MTK_PIN_NO(132) | 1) +#define MT8173_PIN_132_I2S0_DATA1__FUNC_I2S1_DO_2 (MTK_PIN_NO(132) | 2) +#define MT8173_PIN_132_I2S0_DATA1__FUNC_I2S2_DI_2 (MTK_PIN_NO(132) | 3) +#define MT8173_PIN_132_I2S0_DATA1__FUNC_DBG_MON_A_8_ (MTK_PIN_NO(132) | 7) + +#define MT8173_PIN_133_SDA4__FUNC_GPIO133 (MTK_PIN_NO(133) | 0) +#define MT8173_PIN_133_SDA4__FUNC_SDA4 (MTK_PIN_NO(133) | 1) + +#define MT8173_PIN_134_SCL4__FUNC_GPIO134 (MTK_PIN_NO(134) | 0) +#define MT8173_PIN_134_SCL4__FUNC_SCL4 (MTK_PIN_NO(134) | 1) + +#endif /* __DTS_MT8173_PINFUNC_H */ diff --git a/arch/arm64/boot/dts/mediatek/mt8173.dtsi b/arch/arm64/boot/dts/mediatek/mt8173.dtsi new file mode 100644 index 000000000..924fdb667 --- /dev/null +++ b/arch/arm64/boot/dts/mediatek/mt8173.dtsi @@ -0,0 +1,188 @@ +/* + * Copyright (c) 2014 MediaTek Inc. + * Author: Eddie Huang <eddie.huang@mediatek.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/interrupt-controller/arm-gic.h> +#include "mt8173-pinfunc.h" + +/ { + compatible = "mediatek,mt8173"; + interrupt-parent = <&sysirq>; + #address-cells = <2>; + #size-cells = <2>; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu-map { + cluster0 { + core0 { + cpu = <&cpu0>; + }; + core1 { + cpu = <&cpu1>; + }; + }; + + cluster1 { + core0 { + cpu = <&cpu2>; + }; + core1 { + cpu = <&cpu3>; + }; + }; + }; + + cpu0: cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a53"; + reg = <0x000>; + }; + + cpu1: cpu@1 { + device_type = "cpu"; + compatible = "arm,cortex-a53"; + reg = <0x001>; + enable-method = "psci"; + }; + + cpu2: cpu@100 { + device_type = "cpu"; + compatible = "arm,cortex-a57"; + reg = <0x100>; + enable-method = "psci"; + }; + + cpu3: cpu@101 { + device_type = "cpu"; + compatible = "arm,cortex-a57"; + reg = <0x101>; + enable-method = "psci"; + }; + }; + + psci { + compatible = "arm,psci"; + method = "smc"; + cpu_suspend = <0x84000001>; + cpu_off = <0x84000002>; + cpu_on = <0x84000003>; + }; + + uart_clk: dummy26m { + compatible = "fixed-clock"; + clock-frequency = <26000000>; + #clock-cells = <0>; + }; + + timer { + compatible = "arm,armv8-timer"; + interrupt-parent = <&gic>; + interrupts = <GIC_PPI 13 + (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 14 + (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 11 + (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 10 + (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>; + }; + + soc { + #address-cells = <2>; + #size-cells = <2>; + compatible = "simple-bus"; + ranges; + + syscfg_pctl_a: syscfg_pctl_a@10005000 { + compatible = "mediatek,mt8173-pctl-a-syscfg", "syscon"; + reg = <0 0x10005000 0 0x1000>; + }; + + pio: pinctrl@0x10005000 { + compatible = "mediatek,mt8173-pinctrl"; + reg = <0 0x1000B000 0 0x1000>; + mediatek,pctl-regmap = <&syscfg_pctl_a>; + pins-are-numbered; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + interrupts = <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>; + }; + + sysirq: intpol-controller@10200620 { + compatible = "mediatek,mt8173-sysirq", + "mediatek,mt6577-sysirq"; + interrupt-controller; + #interrupt-cells = <3>; + interrupt-parent = <&gic>; + reg = <0 0x10200620 0 0x20>; + }; + + gic: interrupt-controller@10220000 { + compatible = "arm,gic-400"; + #interrupt-cells = <3>; + interrupt-parent = <&gic>; + interrupt-controller; + reg = <0 0x10221000 0 0x1000>, + <0 0x10222000 0 0x2000>, + <0 0x10224000 0 0x2000>, + <0 0x10226000 0 0x2000>; + interrupts = <GIC_PPI 9 + (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>; + }; + + uart0: serial@11002000 { + compatible = "mediatek,mt8173-uart", + "mediatek,mt6577-uart"; + reg = <0 0x11002000 0 0x400>; + interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_LOW>; + clocks = <&uart_clk>; + status = "disabled"; + }; + + uart1: serial@11003000 { + compatible = "mediatek,mt8173-uart", + "mediatek,mt6577-uart"; + reg = <0 0x11003000 0 0x400>; + interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_LOW>; + clocks = <&uart_clk>; + status = "disabled"; + }; + + uart2: serial@11004000 { + compatible = "mediatek,mt8173-uart", + "mediatek,mt6577-uart"; + reg = <0 0x11004000 0 0x400>; + interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_LOW>; + clocks = <&uart_clk>; + status = "disabled"; + }; + + uart3: serial@11005000 { + compatible = "mediatek,mt8173-uart", + "mediatek,mt6577-uart"; + reg = <0 0x11005000 0 0x400>; + interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_LOW>; + clocks = <&uart_clk>; + status = "disabled"; + }; + }; + +}; + diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile new file mode 100644 index 000000000..8e94af64e --- /dev/null +++ b/arch/arm64/boot/dts/qcom/Makefile @@ -0,0 +1,5 @@ +dtb-$(CONFIG_ARCH_QCOM) += apq8016-sbc.dtb msm8916-mtp.dtb + +always := $(dtb-y) +subdir-y := $(dts-dirs) +clean-files := *.dtb diff --git a/arch/arm64/boot/dts/qcom/apq8016-sbc.dts b/arch/arm64/boot/dts/qcom/apq8016-sbc.dts new file mode 100644 index 000000000..825f489a2 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/apq8016-sbc.dts @@ -0,0 +1,21 @@ +/* + * Copyright (c) 2015, The Linux Foundation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 and + * only version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +/dts-v1/; + +#include "apq8016-sbc.dtsi" + +/ { + model = "Qualcomm Technologies, Inc. APQ 8016 SBC"; + compatible = "qcom,apq8016-sbc", "qcom,apq8016", "qcom,sbc"; +}; diff --git a/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi b/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi new file mode 100644 index 000000000..703a4f16e --- /dev/null +++ b/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi @@ -0,0 +1,33 @@ +/* + * Copyright (c) 2015, The Linux Foundation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 and + * only version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include "msm8916.dtsi" + +/ { + aliases { + serial0 = &blsp1_uart2; + }; + + chosen { + stdout-path = "serial0"; + }; + + soc { + serial@78b0000 { + status = "okay"; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&blsp1_uart2_default>; + pinctrl-1 = <&blsp1_uart2_sleep>; + }; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/msm8916-mtp.dts b/arch/arm64/boot/dts/qcom/msm8916-mtp.dts new file mode 100644 index 000000000..fced77f0f --- /dev/null +++ b/arch/arm64/boot/dts/qcom/msm8916-mtp.dts @@ -0,0 +1,22 @@ +/* + * Copyright (c) 2014-2015, The Linux Foundation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 and + * only version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +/dts-v1/; + +#include "msm8916-mtp.dtsi" + +/ { + model = "Qualcomm Technologies, Inc. MSM 8916 MTP"; + compatible = "qcom,msm8916-mtp", "qcom,msm8916-mtp-smb1360", + "qcom,msm8916", "qcom,mtp"; +}; diff --git a/arch/arm64/boot/dts/qcom/msm8916-mtp.dtsi b/arch/arm64/boot/dts/qcom/msm8916-mtp.dtsi new file mode 100644 index 000000000..bea871b0d --- /dev/null +++ b/arch/arm64/boot/dts/qcom/msm8916-mtp.dtsi @@ -0,0 +1,33 @@ +/* + * Copyright (c) 2014-2015, The Linux Foundation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 and + * only version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include "msm8916.dtsi" + +/ { + aliases { + serial0 = &blsp1_uart2; + }; + + chosen { + stdout-path = "serial0"; + }; + + soc { + serial@78b0000 { + status = "okay"; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&blsp1_uart2_default>; + pinctrl-1 = <&blsp1_uart2_sleep>; + }; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/msm8916.dtsi b/arch/arm64/boot/dts/qcom/msm8916.dtsi new file mode 100644 index 000000000..f212b8303 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/msm8916.dtsi @@ -0,0 +1,196 @@ +/* + * Copyright (c) 2013-2015, The Linux Foundation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 and + * only version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/clock/qcom,gcc-msm8916.h> +#include <dt-bindings/reset/qcom,gcc-msm8916.h> + +/ { + model = "Qualcomm Technologies, Inc. MSM8916"; + compatible = "qcom,msm8916"; + + interrupt-parent = <&intc>; + + #address-cells = <2>; + #size-cells = <2>; + + aliases { }; + + chosen { }; + + memory { + device_type = "memory"; + /* We expect the bootloader to fill in the reg */ + reg = <0 0 0 0>; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + CPU0: cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a53", "arm,armv8"; + reg = <0x0>; + }; + + CPU1: cpu@1 { + device_type = "cpu"; + compatible = "arm,cortex-a53", "arm,armv8"; + reg = <0x1>; + }; + + CPU2: cpu@2 { + device_type = "cpu"; + compatible = "arm,cortex-a53", "arm,armv8"; + reg = <0x2>; + }; + + CPU3: cpu@3 { + device_type = "cpu"; + compatible = "arm,cortex-a53", "arm,armv8"; + reg = <0x3>; + }; + }; + + timer { + compatible = "arm,armv8-timer"; + interrupts = <GIC_PPI 2 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 3 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 4 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 1 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>; + }; + + soc: soc { + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0 0 0xffffffff>; + compatible = "simple-bus"; + + pinctrl@1000000 { + compatible = "qcom,msm8916-pinctrl"; + reg = <0x1000000 0x300000>; + interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + + blsp1_uart2_default: blsp1_uart2_default { + pinmux { + function = "blsp_uart2"; + pins = "gpio4", "gpio5"; + }; + pinconf { + pins = "gpio4", "gpio5"; + drive-strength = <16>; + bias-disable; + }; + }; + + blsp1_uart2_sleep: blsp1_uart2_sleep { + pinmux { + function = "blsp_uart2"; + pins = "gpio4", "gpio5"; + }; + pinconf { + pins = "gpio4", "gpio5"; + drive-strength = <2>; + bias-pull-down; + }; + }; + }; + + gcc: qcom,gcc@1800000 { + compatible = "qcom,gcc-msm8916"; + #clock-cells = <1>; + #reset-cells = <1>; + reg = <0x1800000 0x80000>; + }; + + blsp1_uart2: serial@78b0000 { + compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm"; + reg = <0x78b0000 0x200>; + interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_BLSP1_UART2_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; + status = "disabled"; + }; + + intc: interrupt-controller@b000000 { + compatible = "qcom,msm-qgic2"; + interrupt-controller; + #interrupt-cells = <3>; + reg = <0x0b000000 0x1000>, <0x0b002000 0x1000>; + }; + + timer@b020000 { + #address-cells = <1>; + #size-cells = <1>; + ranges; + compatible = "arm,armv7-timer-mem"; + reg = <0xb020000 0x1000>; + clock-frequency = <19200000>; + + frame@b021000 { + frame-number = <0>; + interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; + reg = <0xb021000 0x1000>, + <0xb022000 0x1000>; + }; + + frame@b023000 { + frame-number = <1>; + interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>; + reg = <0xb023000 0x1000>; + status = "disabled"; + }; + + frame@b024000 { + frame-number = <2>; + interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; + reg = <0xb024000 0x1000>; + status = "disabled"; + }; + + frame@b025000 { + frame-number = <3>; + interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>; + reg = <0xb025000 0x1000>; + status = "disabled"; + }; + + frame@b026000 { + frame-number = <4>; + interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>; + reg = <0xb026000 0x1000>; + status = "disabled"; + }; + + frame@b027000 { + frame-number = <5>; + interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>; + reg = <0xb027000 0x1000>; + status = "disabled"; + }; + + frame@b028000 { + frame-number = <6>; + interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>; + reg = <0xb028000 0x1000>; + status = "disabled"; + }; + }; + }; +}; diff --git a/arch/arm64/boot/dts/skeleton.dtsi b/arch/arm64/boot/dts/skeleton.dtsi new file mode 100644 index 000000000..38ead821b --- /dev/null +++ b/arch/arm64/boot/dts/skeleton.dtsi @@ -0,0 +1,13 @@ +/* + * Skeleton device tree; the bare minimum needed to boot; just include and + * add a compatible value. The bootloader will typically populate the memory + * node. + */ + +/ { + #address-cells = <2>; + #size-cells = <1>; + chosen { }; + aliases { }; + memory { device_type = "memory"; reg = <0 0 0>; }; +}; diff --git a/arch/arm64/boot/dts/sprd/Makefile b/arch/arm64/boot/dts/sprd/Makefile new file mode 100644 index 000000000..b658c5e09 --- /dev/null +++ b/arch/arm64/boot/dts/sprd/Makefile @@ -0,0 +1,5 @@ +dtb-$(CONFIG_ARCH_SPRD) += sc9836-openphone.dtb + +always := $(dtb-y) +subdir-y := $(dts-dirs) +clean-files := *.dtb diff --git a/arch/arm64/boot/dts/sprd/sc9836-openphone.dts b/arch/arm64/boot/dts/sprd/sc9836-openphone.dts new file mode 100644 index 000000000..e5657c35c --- /dev/null +++ b/arch/arm64/boot/dts/sprd/sc9836-openphone.dts @@ -0,0 +1,49 @@ +/* + * Spreadtrum SC9836 openphone board DTS file + * + * Copyright (C) 2014, Spreadtrum Communications Inc. + * + * This file is licensed under a dual GPLv2 or X11 license. + */ + +/dts-v1/; + +#include "sc9836.dtsi" + +/ { + model = "Spreadtrum SC9836 Openphone Board"; + + compatible = "sprd,sc9836-openphone", "sprd,sc9836"; + + aliases { + serial0 = &uart0; + serial1 = &uart1; + serial2 = &uart2; + serial3 = &uart3; + }; + + memory@80000000 { + device_type = "memory"; + reg = <0 0x80000000 0 0x20000000>; + }; + + chosen { + stdout-path = "serial1:115200n8"; + }; +}; + +&uart0 { + status = "okay"; +}; + +&uart1 { + status = "okay"; +}; + +&uart2 { + status = "okay"; +}; + +&uart3 { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/sprd/sc9836.dtsi b/arch/arm64/boot/dts/sprd/sc9836.dtsi new file mode 100644 index 000000000..ee34e1a36 --- /dev/null +++ b/arch/arm64/boot/dts/sprd/sc9836.dtsi @@ -0,0 +1,129 @@ +/* + * Spreadtrum SC9836 SoC DTS file + * + * Copyright (C) 2014, Spreadtrum Communications Inc. + * + * This file is licensed under a dual GPLv2 or X11 license. + */ + +#include "sharkl64.dtsi" +#include <dt-bindings/interrupt-controller/arm-gic.h> + +/ { + compatible = "sprd,sc9836"; + + cpus { + #address-cells = <2>; + #size-cells = <0>; + + cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a53", "arm,armv8"; + reg = <0x0 0x0>; + enable-method = "psci"; + }; + + cpu@1 { + device_type = "cpu"; + compatible = "arm,cortex-a53", "arm,armv8"; + reg = <0x0 0x1>; + enable-method = "psci"; + }; + + cpu@2 { + device_type = "cpu"; + compatible = "arm,cortex-a53", "arm,armv8"; + reg = <0x0 0x2>; + enable-method = "psci"; + }; + + cpu@3 { + device_type = "cpu"; + compatible = "arm,cortex-a53", "arm,armv8"; + reg = <0x0 0x3>; + enable-method = "psci"; + }; + }; + + etf@10003000 { + compatible = "arm,coresight-tmc", "arm,primecell"; + reg = <0 0x10003000 0 0x1000>; + clocks = <&clk26mhz>; + clock-names = "apb_pclk"; + port { + etf_in: endpoint { + slave-mode; + remote-endpoint = <&funnel_out_port0>; + }; + }; + }; + + funnel@10001000 { + compatible = "arm,coresight-funnel", "arm,primecell"; + reg = <0 0x10001000 0 0x1000>; + clocks = <&clk26mhz>; + clock-names = "apb_pclk"; + ports { + #address-cells = <1>; + #size-cells = <0>; + + /* funnel output port */ + port@0 { + reg = <0>; + funnel_out_port0: endpoint { + remote-endpoint = <&etf_in>; + }; + }; + + /* funnel input port 0~3 is reserved for ETMs */ + port@1 { + reg = <4>; + funnel_in_port4: endpoint { + slave-mode; + remote-endpoint = <&stm_out>; + }; + }; + }; + }; + + stm@10006000 { + compatible = "arm,coresight-stm", "arm,primecell"; + reg = <0 0x10006000 0 0x1000>, + <0 0x01000000 0 0x180000>; + reg-names = "stm-base", "stm-stimulus-base"; + clocks = <&clk26mhz>; + clock-names = "apb_pclk"; + port { + stm_out: endpoint { + remote-endpoint = <&funnel_in_port4>; + }; + }; + }; + + gic: interrupt-controller@12001000 { + compatible = "arm,gic-400"; + reg = <0 0x12001000 0 0x1000>, + <0 0x12002000 0 0x2000>, + <0 0x12004000 0 0x2000>, + <0 0x12006000 0 0x2000>; + #interrupt-cells = <3>; + interrupt-controller; + interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>; + }; + + psci { + compatible = "arm,psci"; + method = "smc"; + cpu_on = <0xc4000003>; + cpu_off = <0x84000002>; + cpu_suspend = <0xc4000001>; + }; + + timer { + compatible = "arm,armv8-timer"; + interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>; + }; +}; diff --git a/arch/arm64/boot/dts/sprd/sharkl64.dtsi b/arch/arm64/boot/dts/sprd/sharkl64.dtsi new file mode 100644 index 000000000..69f64e7fc --- /dev/null +++ b/arch/arm64/boot/dts/sprd/sharkl64.dtsi @@ -0,0 +1,65 @@ +/* + * Spreadtrum Sharkl64 platform DTS file + * + * Copyright (C) 2014, Spreadtrum Communications Inc. + * + * This file is licensed under a dual GPLv2 or X11 license. + */ + +/ { + interrupt-parent = <&gic>; + #address-cells = <2>; + #size-cells = <2>; + + soc { + compatible = "simple-bus"; + #address-cells = <2>; + #size-cells = <2>; + ranges; + + ap-apb { + compatible = "simple-bus"; + #address-cells = <2>; + #size-cells = <2>; + ranges; + + uart0: serial@70000000 { + compatible = "sprd,sc9836-uart"; + reg = <0 0x70000000 0 0x100>; + interrupts = <0 2 0xf04>; + clocks = <&clk26mhz>; + status = "disabled"; + }; + + uart1: serial@70100000 { + compatible = "sprd,sc9836-uart"; + reg = <0 0x70100000 0 0x100>; + interrupts = <0 3 0xf04>; + clocks = <&clk26mhz>; + status = "disabled"; + }; + + uart2: serial@70200000 { + compatible = "sprd,sc9836-uart"; + reg = <0 0x70200000 0 0x100>; + interrupts = <0 4 0xf04>; + clocks = <&clk26mhz>; + status = "disabled"; + }; + + uart3: serial@70300000 { + compatible = "sprd,sc9836-uart"; + reg = <0 0x70300000 0 0x100>; + interrupts = <0 5 0xf04>; + clocks = <&clk26mhz>; + status = "disabled"; + }; + }; + }; + + clk26mhz: clk26mhz { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <26000000>; + }; +}; diff --git a/arch/arm64/boot/dts/xilinx/Makefile b/arch/arm64/boot/dts/xilinx/Makefile new file mode 100644 index 000000000..ae16427f6 --- /dev/null +++ b/arch/arm64/boot/dts/xilinx/Makefile @@ -0,0 +1,5 @@ +dtb-$(CONFIG_ARCH_ZYNQMP) += zynqmp-ep108.dtb + +always := $(dtb-y) +subdir-y := $(dts-dirs) +clean-files := *.dtb diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-ep108.dts b/arch/arm64/boot/dts/xilinx/zynqmp-ep108.dts new file mode 100644 index 000000000..0a3f40ecd --- /dev/null +++ b/arch/arm64/boot/dts/xilinx/zynqmp-ep108.dts @@ -0,0 +1,47 @@ +/* + * dts file for Xilinx ZynqMP ep108 development board + * + * (C) Copyright 2014 - 2015, Xilinx, Inc. + * + * Michal Simek <michal.simek@xilinx.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + */ + +/dts-v1/; + +/include/ "zynqmp.dtsi" + +/ { + model = "ZynqMP EP108"; + + aliases { + serial0 = &uart0; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + memory { + device_type = "memory"; + reg = <0x0 0x0 0x40000000>; + }; +}; + +&gem0 { + status = "okay"; + phy-handle = <&phy0>; + phy-mode = "rgmii-id"; + phy0: phy@0{ + reg = <0>; + max-speed = <100>; + }; +}; + +&uart0 { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/xilinx/zynqmp.dtsi b/arch/arm64/boot/dts/xilinx/zynqmp.dtsi new file mode 100644 index 000000000..11e0b0004 --- /dev/null +++ b/arch/arm64/boot/dts/xilinx/zynqmp.dtsi @@ -0,0 +1,305 @@ +/* + * dts file for Xilinx ZynqMP + * + * (C) Copyright 2014 - 2015, Xilinx, Inc. + * + * Michal Simek <michal.simek@xilinx.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + */ + +/ { + compatible = "xlnx,zynqmp"; + #address-cells = <2>; + #size-cells = <1>; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu@0 { + compatible = "arm,cortex-a53", "arm,armv8"; + device_type = "cpu"; + enable-method = "psci"; + reg = <0x0>; + }; + + cpu@1 { + compatible = "arm,cortex-a53", "arm,armv8"; + device_type = "cpu"; + enable-method = "psci"; + reg = <0x1>; + }; + + cpu@2 { + compatible = "arm,cortex-a53", "arm,armv8"; + device_type = "cpu"; + enable-method = "psci"; + reg = <0x2>; + }; + + cpu@3 { + compatible = "arm,cortex-a53", "arm,armv8"; + device_type = "cpu"; + enable-method = "psci"; + reg = <0x3>; + }; + }; + + pmu { + compatible = "arm,armv8-pmuv3"; + interrupts = <0 143 4>, + <0 144 4>, + <0 145 4>, + <0 146 4>; + }; + + psci { + compatible = "arm,psci-0.2"; + method = "smc"; + }; + + timer { + compatible = "arm,armv8-timer"; + interrupt-parent = <&gic>; + interrupts = <1 13 0xf01>, + <1 14 0xf01>, + <1 11 0xf01>, + <1 10 0xf01>; + }; + + amba_apu { + compatible = "simple-bus"; + #address-cells = <2>; + #size-cells = <1>; + ranges; + + gic: interrupt-controller@f9010000 { + compatible = "arm,gic-400", "arm,cortex-a15-gic"; + #interrupt-cells = <3>; + reg = <0x0 0xf9010000 0x10000>, + <0x0 0xf902f000 0x2000>, + <0x0 0xf9040000 0x20000>, + <0x0 0xf906f000 0x2000>; + interrupt-controller; + interrupt-parent = <&gic>; + interrupts = <1 9 0xf04>; + }; + }; + + amba { + compatible = "simple-bus"; + #address-cells = <2>; + #size-cells = <1>; + ranges; + + misc_clk: misc_clk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <25000000>; + }; + + ttc0: timer@ff110000 { + compatible = "cdns,ttc"; + status = "disabled"; + interrupt-parent = <&gic>; + interrupts = <0 36 4>, <0 37 4>, <0 38 4>; + reg = <0x0 0xff110000 0x1000>; + clocks = <&misc_clk>; + timer-width = <32>; + }; + + ttc1: timer@ff120000 { + compatible = "cdns,ttc"; + status = "disabled"; + interrupt-parent = <&gic>; + interrupts = <0 39 4>, <0 40 4>, <0 41 4>; + reg = <0x0 0xff120000 0x1000>; + clocks = <&misc_clk>; + timer-width = <32>; + }; + + ttc2: timer@ff130000 { + compatible = "cdns,ttc"; + status = "disabled"; + interrupt-parent = <&gic>; + interrupts = <0 42 4>, <0 43 4>, <0 44 4>; + reg = <0x0 0xff130000 0x1000>; + clocks = <&misc_clk>; + timer-width = <32>; + }; + + ttc3: timer@ff140000 { + compatible = "cdns,ttc"; + status = "disabled"; + interrupt-parent = <&gic>; + interrupts = <0 45 4>, <0 46 4>, <0 47 4>; + reg = <0x0 0xff140000 0x1000>; + clocks = <&misc_clk>; + timer-width = <32>; + }; + + uart0: serial@ff000000 { + compatible = "cdns,uart-r1p8"; + status = "disabled"; + interrupt-parent = <&gic>; + interrupts = <0 21 4>; + reg = <0x0 0xff000000 0x1000>; + clock-names = "uart_clk", "pclk"; + clocks = <&misc_clk &misc_clk>; + }; + + uart1: serial@ff010000 { + compatible = "cdns,uart-r1p8"; + status = "disabled"; + interrupt-parent = <&gic>; + interrupts = <0 22 4>; + reg = <0x0 0xff010000 0x1000>; + clock-names = "uart_clk", "pclk"; + clocks = <&misc_clk &misc_clk>; + }; + + gpio: gpio@ff0a0000 { + compatible = "xlnx,zynq-gpio-1.0"; + status = "disabled"; + #gpio-cells = <0x2>; + clocks = <&misc_clk>; + interrupt-parent = <&gic>; + interrupts = <0 16 4>; + reg = <0x0 0xff0a0000 0x1000>; + }; + + gem0: ethernet@ff0b0000 { + compatible = "cdns,gem"; + status = "disabled"; + interrupt-parent = <&gic>; + interrupts = <0 57 4>, <0 57 4>; + reg = <0x0 0xff0b0000 0x1000>; + clock-names = "pclk", "hclk", "tx_clk"; + clocks = <&misc_clk>, <&misc_clk>, <&misc_clk>; + #address-cells = <1>; + #size-cells = <0>; + }; + + gem1: ethernet@ff0c0000 { + compatible = "cdns,gem"; + status = "disabled"; + interrupt-parent = <&gic>; + interrupts = <0 59 4>, <0 59 4>; + reg = <0x0 0xff0c0000 0x1000>; + clock-names = "pclk", "hclk", "tx_clk"; + clocks = <&misc_clk>, <&misc_clk>, <&misc_clk>; + #address-cells = <1>; + #size-cells = <0>; + }; + + gem2: ethernet@ff0d0000 { + compatible = "cdns,gem"; + status = "disabled"; + interrupt-parent = <&gic>; + interrupts = <0 61 4>, <0 61 4>; + reg = <0x0 0xff0d0000 0x1000>; + clock-names = "pclk", "hclk", "tx_clk"; + clocks = <&misc_clk>, <&misc_clk>, <&misc_clk>; + #address-cells = <1>; + #size-cells = <0>; + }; + + gem3: ethernet@ff0e0000 { + compatible = "cdns,gem"; + status = "disabled"; + interrupt-parent = <&gic>; + interrupts = <0 63 4>, <0 63 4>; + reg = <0x0 0xff0e0000 0x1000>; + clock-names = "pclk", "hclk", "tx_clk"; + clocks = <&misc_clk>, <&misc_clk>, <&misc_clk>; + #address-cells = <1>; + #size-cells = <0>; + }; + + spi0: spi@ff040000 { + compatible = "cdns,spi-r1p6"; + status = "disabled"; + interrupt-parent = <&gic>; + interrupts = <0 19 4>; + reg = <0x0 0xff040000 0x1000>; + clock-names = "ref_clk", "pclk"; + clocks = <&misc_clk &misc_clk>; + #address-cells = <1>; + #size-cells = <0>; + }; + + spi1: spi@ff050000 { + compatible = "cdns,spi-r1p6"; + status = "disabled"; + interrupt-parent = <&gic>; + interrupts = <0 20 4>; + reg = <0x0 0xff050000 0x1000>; + clock-names = "ref_clk", "pclk"; + clocks = <&misc_clk &misc_clk>; + #address-cells = <1>; + #size-cells = <0>; + }; + + i2c_clk: i2c_clk { + compatible = "fixed-clock"; + #clock-cells = <0x0>; + clock-frequency = <111111111>; + }; + + i2c0: i2c@ff020000 { + compatible = "cdns,i2c-r1p10"; + status = "disabled"; + interrupt-parent = <&gic>; + interrupts = <0 17 4>; + reg = <0x0 0xff020000 0x1000>; + clocks = <&i2c_clk>; + #address-cells = <1>; + #size-cells = <0>; + }; + + i2c1: i2c@ff030000 { + compatible = "cdns,i2c-r1p10"; + status = "disabled"; + interrupt-parent = <&gic>; + interrupts = <0 18 4>; + reg = <0x0 0xff030000 0x1000>; + clocks = <&i2c_clk>; + #address-cells = <1>; + #size-cells = <0>; + }; + + sdhci0: sdhci@ff160000 { + compatible = "arasan,sdhci-8.9a"; + status = "disabled"; + interrupt-parent = <&gic>; + interrupts = <0 48 4>; + reg = <0x0 0xff160000 0x1000>; + clock-names = "clk_xin", "clk_ahb"; + clocks = <&misc_clk>, <&misc_clk>; + }; + + sdhci1: sdhci@ff170000 { + compatible = "arasan,sdhci-8.9a"; + status = "disabled"; + interrupt-parent = <&gic>; + interrupts = <0 49 4>; + reg = <0x0 0xff170000 0x1000>; + clock-names = "clk_xin", "clk_ahb"; + clocks = <&misc_clk>, <&misc_clk>; + }; + + watchdog0: watchdog@fd4d0000 { + compatible = "cdns,wdt-r1p2"; + status = "disabled"; + clocks= <&misc_clk>; + interrupt-parent = <&gic>; + interrupts = <0 52 1>; + reg = <0x0 0xfd4d0000 0x1000>; + timeout-sec = <10>; + }; + }; +}; |