diff options
Diffstat (limited to 'arch/arm')
841 files changed, 38439 insertions, 23233 deletions
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 45df48ba0..1c5021002 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -15,6 +15,8 @@ config ARM select CLONE_BACKWARDS select CPU_PM if (SUSPEND || CPU_IDLE) select DCACHE_WORD_ACCESS if HAVE_EFFICIENT_UNALIGNED_ACCESS + select EDAC_SUPPORT + select EDAC_ATOMIC_SCRUB select GENERIC_ALLOCATOR select GENERIC_ATOMIC64 if (CPU_V7M || CPU_V6 || !CPU_32v6K || !AEABI) select GENERIC_CLOCKEVENTS_BROADCAST if SMP @@ -31,8 +33,8 @@ config ARM select HARDIRQS_SW_RESEND select HAVE_ARCH_AUDITSYSCALL if (AEABI && !OABI_COMPAT) select HAVE_ARCH_BITREVERSE if (CPU_32v7M || CPU_32v7) && !CPU_32v6 - select HAVE_ARCH_JUMP_LABEL if !XIP_KERNEL - select HAVE_ARCH_KGDB + select HAVE_ARCH_JUMP_LABEL if !XIP_KERNEL && !CPU_ENDIAN_BE32 + select HAVE_ARCH_KGDB if !CPU_ENDIAN_BE32 select HAVE_ARCH_SECCOMP_FILTER if (AEABI && !OABI_COMPAT) select HAVE_ARCH_TRACEHOOK select HAVE_BPF_JIT @@ -43,7 +45,7 @@ config ARM select HAVE_DMA_API_DEBUG select HAVE_DMA_ATTRS select HAVE_DMA_CONTIGUOUS if MMU - select HAVE_DYNAMIC_FTRACE if (!XIP_KERNEL) + select HAVE_DYNAMIC_FTRACE if (!XIP_KERNEL) && !CPU_ENDIAN_BE32 select HAVE_EFFICIENT_UNALIGNED_ACCESS if (CPU_V6 || CPU_V6K || CPU_V7) && MMU select HAVE_FTRACE_MCOUNT_RECORD if (!XIP_KERNEL) select HAVE_FUNCTION_GRAPH_TRACER if (!THUMB2_KERNEL) @@ -57,10 +59,10 @@ config ARM select HAVE_KERNEL_LZMA select HAVE_KERNEL_LZO select HAVE_KERNEL_XZ - select HAVE_KPROBES if !XIP_KERNEL + select HAVE_KPROBES if !XIP_KERNEL && !CPU_ENDIAN_BE32 && !CPU_V7M select HAVE_KRETPROBES if (HAVE_KPROBES) select HAVE_MEMBLOCK - select HAVE_MOD_ARCH_SPECIFIC if ARM_UNWIND + select HAVE_MOD_ARCH_SPECIFIC select HAVE_OPROFILE if (HAVE_PERF_EVENTS) select HAVE_OPTPROBES if !THUMB2_KERNEL select HAVE_PERF_EVENTS @@ -171,7 +173,7 @@ config LOCKDEP_SUPPORT config TRACE_IRQFLAGS_SUPPORT bool - default y + default !CPU_V7M config RWSEM_XCHGADD_ALGORITHM bool @@ -329,6 +331,20 @@ config ARCH_MULTIPLATFORM select SPARSE_IRQ select USE_OF +config ARM_SINGLE_ARMV7M + bool "ARMv7-M based platforms (Cortex-M0/M3/M4)" + depends on !MMU + select ARCH_WANT_OPTIONAL_GPIOLIB + select ARM_NVIC + select AUTO_ZRELADDR + select CLKSRC_OF + select COMMON_CLK + select CPU_V7M + select GENERIC_CLOCKEVENTS + select NO_IOPORT_MAP + select SPARSE_IRQ + select USE_OF + config ARCH_REALVIEW bool "ARM Ltd. RealView family" select ARCH_WANT_OPTIONAL_GPIOLIB @@ -398,24 +414,6 @@ config ARCH_EBSA110 Ethernet interface, two PCMCIA sockets, two serial ports and a parallel port. -config ARCH_EFM32 - bool "Energy Micro efm32" - depends on !MMU - select ARCH_REQUIRE_GPIOLIB - select ARM_NVIC - select AUTO_ZRELADDR - select CLKSRC_OF - select COMMON_CLK - select CPU_V7M - select GENERIC_CLOCKEVENTS - select NO_DMA - select NO_IOPORT_MAP - select SPARSE_IRQ - select USE_OF - help - Support for Energy Micro's (now Silicon Labs) efm32 Giant Gecko - processors. - config ARCH_EP93XX bool "EP93xx-based" select ARCH_HAS_HOLES_MEMORYMODEL @@ -606,6 +604,7 @@ config ARCH_PXA select ARCH_REQUIRE_GPIOLIB select ARM_CPU_SUSPEND if PM select AUTO_ZRELADDR + select COMMON_CLK select CLKDEV_LOOKUP select CLKSRC_MMIO select CLKSRC_OF @@ -752,8 +751,10 @@ config ARCH_OMAP1 select GENERIC_IRQ_CHIP select HAVE_IDE select IRQ_DOMAIN + select MULTI_IRQ_HANDLER select NEED_MACH_IO_H if PCCARD select NEED_MACH_MEMORY_H + select SPARSE_IRQ help Support for older TI OMAP1 (omap7xx, omap15xx or omap16xx) @@ -937,6 +938,8 @@ source "arch/arm/mach-tegra/Kconfig" source "arch/arm/mach-u300/Kconfig" +source "arch/arm/mach-uniphier/Kconfig" + source "arch/arm/mach-ux500/Kconfig" source "arch/arm/mach-versatile/Kconfig" @@ -948,8 +951,40 @@ source "arch/arm/mach-vt8500/Kconfig" source "arch/arm/mach-w90x900/Kconfig" +source "arch/arm/mach-zx/Kconfig" + source "arch/arm/mach-zynq/Kconfig" +# ARMv7-M architecture +config ARCH_EFM32 + bool "Energy Micro efm32" + depends on ARM_SINGLE_ARMV7M + select ARCH_REQUIRE_GPIOLIB + help + Support for Energy Micro's (now Silicon Labs) efm32 Giant Gecko + processors. + +config ARCH_LPC18XX + bool "NXP LPC18xx/LPC43xx" + depends on ARM_SINGLE_ARMV7M + select ARCH_HAS_RESET_CONTROLLER + select ARM_AMBA + select CLKSRC_LPC32XX + select PINCTRL + help + Support for NXP's LPC18xx Cortex-M3 and LPC43xx Cortex-M4 + high performance microcontrollers. + +config ARCH_STM32 + bool "STMicrolectronics STM32" + depends on ARM_SINGLE_ARMV7M + select ARCH_HAS_RESET_CONTROLLER + select ARMV7M_SYSTICK + select CLKSRC_STM32 + select RESET_CONTROLLER + help + Support for STMicroelectronics STM32 processors. + # Definitions to make life easier config ARCH_ACORN bool @@ -975,11 +1010,6 @@ config PLAT_PXA config PLAT_VERSATILE bool -config ARM_TIMER_SP804 - bool - select CLKSRC_MMIO - select CLKSRC_OF if OF - source "arch/arm/firmware/Kconfig" source arch/arm/mm/Kconfig @@ -1307,6 +1337,7 @@ config SMP depends on GENERIC_CLOCKEVENTS depends on HAVE_SMP depends on MMU || ARM_MPU + select IRQ_WORK help This enables support for systems with more than one CPU. If you have a system with only one CPU, say N. If you have a system with more @@ -1477,7 +1508,8 @@ config ARM_PSCI # selected platforms. config ARCH_NR_GPIO int - default 1024 if ARCH_SHMOBILE || ARCH_TEGRA || ARCH_ZYNQ + default 1024 if ARCH_BRCMSTB || ARCH_SHMOBILE || ARCH_TEGRA || \ + ARCH_ZYNQ default 512 if ARCH_EXYNOS || ARCH_KEYSTONE || SOC_OMAP5 || \ SOC_DRA7XX || ARCH_S3C24XX || ARCH_S3C64XX || ARCH_S5PV210 default 416 if ARCH_SUNXI @@ -1661,6 +1693,12 @@ config HIGHMEM config HIGHPTE bool "Allocate 2nd-level pagetables from highmem" depends on HIGHMEM + help + The VM uses one page of physical memory for each page table. + For systems with a lot of processes, this can use a lot of + precious low memory, eventually leading to low memory being + consumed by page tables. Setting this option will allow + user-space 2nd level page tables to reside in high memory. config HW_PERF_EVENTS bool "Enable hardware performance counter support for perf events" @@ -1681,6 +1719,21 @@ config HAVE_ARCH_TRANSPARENT_HUGEPAGE config ARCH_WANT_GENERAL_HUGETLB def_bool y +config ARM_MODULE_PLTS + bool "Use PLTs to allow module memory to spill over into vmalloc area" + depends on MODULES + help + Allocate PLTs when loading modules so that jumps and calls whose + targets are too far away for their relative offsets to be encoded + in the instructions themselves can be bounced via veneers in the + module's PLT. This allows modules to be allocated in the generic + vmalloc area after the dedicated module memory area has been + exhausted. The modules will use slightly more memory, but after + rounding up to page size, the actual memory footprint is usually + the same. + + Say y if you are getting out of memory errors while loading modules + source "mm/Kconfig" config FORCE_MAX_ZONEORDER @@ -1951,6 +2004,7 @@ config XIP_PHYS_ADDR config KEXEC bool "Kexec system call (EXPERIMENTAL)" depends on (!SMP || PM_SLEEP_SMP) + depends on !CPU_V7M help kexec is a system call that implements the ability to shutdown your current kernel, and to start another kernel. It is like a reboot diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug index 0c12ffb15..a2e16f940 100644 --- a/arch/arm/Kconfig.debug +++ b/arch/arm/Kconfig.debug @@ -5,6 +5,7 @@ source "lib/Kconfig.debug" config ARM_PTDUMP bool "Export kernel pagetable layout to userspace via debugfs" depends on DEBUG_KERNEL + depends on MMU select DEBUG_FS ---help--- Say Y here if you want to show the kernel pagetable layout in a @@ -410,6 +411,13 @@ choice Say Y here if you want kernel low-level debugging support on i.MX6SX. + config DEBUG_IMX7D_UART + bool "i.MX7D Debug UART" + depends on SOC_IMX7D + help + Say Y here if you want kernel low-level debugging support + on i.MX7D. + config DEBUG_KEYSTONE_UART0 bool "Kernel low-level debugging on KEYSTONE2 using UART0" depends on ARCH_KEYSTONE @@ -433,6 +441,14 @@ choice Say Y here if you want kernel low-level debugging support on KS8695. + config DEBUG_LPC18XX_UART0 + bool "Kernel low-level debugging via LPC18xx/43xx UART0" + depends on ARCH_LPC18XX + select DEBUG_UART_8250 + help + Say Y here if you want kernel low-level debugging support + on NXP LPC18xx/43xx UART0. + config DEBUG_MESON_UARTAO bool "Kernel low-level debugging via Meson6 UARTAO" depends on ARCH_MESON @@ -908,13 +924,22 @@ choice on SA-11x0 UART ports. The kernel will check for the first enabled UART in a sequence 3-1-2. - config DEBUG_SOCFPGA_UART + config DEBUG_SOCFPGA_UART0 depends on ARCH_SOCFPGA - bool "Use SOCFPGA UART for low-level debug" + bool "Use SOCFPGA UART0 for low-level debug" select DEBUG_UART_8250 help Say Y here if you want kernel low-level debugging support - on SOCFPGA based platforms. + on SOCFPGA(Cyclone 5 and Arria 5) based platforms. + + config DEBUG_SOCFPGA_UART1 + depends on ARCH_SOCFPGA + bool "Use SOCFPGA UART1 for low-level debug" + select DEBUG_UART_8250 + help + Say Y here if you want kernel low-level debugging support + on SOCFPGA(Arria 10) based platforms. + config DEBUG_SUN9I_UART0 bool "Kernel low-level debugging messages via sun9i UART0" @@ -1157,6 +1182,18 @@ choice For more details about semihosting, please see chapter 8 of DUI0203I_rvct_developer_guide.pdf from ARM Ltd. + config DEBUG_ZTE_ZX + bool "Use ZTE ZX UART" + select DEBUG_UART_PL01X + depends on ARCH_ZX + help + Say Y here if you are enabling ZTE ZX296702 SOC and need + debug uart support. + + This option is preferred over the platform specific + options; the platform specific options are deprecated + and will be soon removed. + config DEBUG_LL_UART_8250 bool "Kernel low-level debugging via 8250 UART" help @@ -1231,7 +1268,8 @@ config DEBUG_IMX_UART_PORT DEBUG_IMX53_UART || \ DEBUG_IMX6Q_UART || \ DEBUG_IMX6SL_UART || \ - DEBUG_IMX6SX_UART + DEBUG_IMX6SX_UART || \ + DEBUG_IMX7D_UART default 1 depends on ARCH_MXC help @@ -1281,7 +1319,8 @@ config DEBUG_LL_INCLUDE DEBUG_IMX53_UART ||\ DEBUG_IMX6Q_UART || \ DEBUG_IMX6SL_UART || \ - DEBUG_IMX6SX_UART + DEBUG_IMX6SX_UART || \ + DEBUG_IMX7D_UART default "debug/ks8695.S" if DEBUG_KS8695_UART default "debug/msm.S" if DEBUG_QCOM_UARTDM default "debug/netx.S" if DEBUG_NETX_UART @@ -1337,6 +1376,7 @@ config DEBUG_UART_PHYS default 0x02531000 if DEBUG_KEYSTONE_UART1 default 0x03010fe0 if ARCH_RPC default 0x07000000 if DEBUG_SUN9I_UART0 + default 0x09405000 if DEBUG_ZTE_ZX default 0x10009000 if DEBUG_REALVIEW_STD_PORT || \ DEBUG_VEXPRESS_UART0_CA9 default 0x1010c000 if DEBUG_REALVIEW_PB1176_PORT @@ -1359,6 +1399,7 @@ config DEBUG_UART_PHYS default 0x20201000 if DEBUG_BCM2835 default 0x3e000000 if DEBUG_BCM_KONA_UART default 0x4000e400 if DEBUG_LL_UART_EFM32 + default 0x40081000 if DEBUG_LPC18XX_UART0 default 0x40090000 if ARCH_LPC32XX default 0x40100000 if DEBUG_PXA_UART1 default 0x42000000 if ARCH_GEMINI @@ -1407,7 +1448,8 @@ config DEBUG_UART_PHYS default 0xfd883000 if DEBUG_ALPINE_UART0 default 0xfe800000 if ARCH_IOP32X default 0xff690000 if DEBUG_RK32_UART2 - default 0xffc02000 if DEBUG_SOCFPGA_UART + default 0xffc02000 if DEBUG_SOCFPGA_UART0 + default 0xffc02100 if DEBUG_SOCFPGA_UART1 default 0xffd82340 if ARCH_IOP13XX default 0xffe40000 if DEBUG_RCAR_GEN1_SCIF0 default 0xffe42000 if DEBUG_RCAR_GEN1_SCIF2 @@ -1466,6 +1508,7 @@ config DEBUG_UART_VIRT default 0xfb009000 if DEBUG_REALVIEW_STD_PORT default 0xfb10c000 if DEBUG_REALVIEW_PB1176_PORT default 0xfc40ab00 if DEBUG_BRCMSTB_UART + default 0xfc705000 if DEBUG_ZTE_ZX default 0xfcfe8600 if DEBUG_UART_BCM63XX default 0xfd000000 if ARCH_SPEAR3XX || ARCH_SPEAR6XX default 0xfd000000 if ARCH_SPEAR13XX @@ -1485,7 +1528,8 @@ config DEBUG_UART_VIRT default 0xfeb26000 if DEBUG_RK3X_UART1 default 0xfeb30c00 if DEBUG_KEYSTONE_UART0 default 0xfeb31000 if DEBUG_KEYSTONE_UART1 - default 0xfec02000 if DEBUG_SOCFPGA_UART + default 0xfec02000 if DEBUG_SOCFPGA_UART0 + default 0xfec02100 if DEBUG_SOCFPGA_UART1 default 0xfec12000 if DEBUG_MVEBU_UART0 || DEBUG_MVEBU_UART0_ALTERNATE default 0xfec12100 if DEBUG_MVEBU_UART1_ALTERNATE default 0xfec10000 if DEBUG_SIRFATLAS7_UART0 @@ -1530,8 +1574,9 @@ config DEBUG_UART_8250_WORD bool "Use 32-bit accesses for 8250 UART" depends on DEBUG_LL_UART_8250 || DEBUG_UART_8250 depends on DEBUG_UART_8250_SHIFT >= 2 - default y if DEBUG_PICOXCELL_UART || DEBUG_SOCFPGA_UART || \ - ARCH_KEYSTONE || DEBUG_ALPINE_UART0 || \ + default y if DEBUG_PICOXCELL_UART || DEBUG_SOCFPGA_UART0 || \ + DEBUG_SOCFPGA_UART1 || ARCH_KEYSTONE || \ + DEBUG_ALPINE_UART0 || \ DEBUG_DAVINCI_DMx_UART0 || DEBUG_DAVINCI_DA8XX_UART1 || \ DEBUG_DAVINCI_DA8XX_UART2 || \ DEBUG_BCM_KONA_UART || DEBUG_RK32_UART2 || \ @@ -1544,7 +1589,7 @@ config DEBUG_UART_8250_FLOW_CONTROL config DEBUG_UNCOMPRESS bool - depends on ARCH_MULTIPLATFORM || PLAT_SAMSUNG + depends on ARCH_MULTIPLATFORM || PLAT_SAMSUNG || ARM_SINGLE_ARMV7M default y if DEBUG_LL && !DEBUG_OMAP2PLUS_UART && \ (!DEBUG_TEGRA_UART || !ZBOOT_ROM) help @@ -1561,7 +1606,7 @@ config DEBUG_UNCOMPRESS config UNCOMPRESS_INCLUDE string default "debug/uncompress.h" if ARCH_MULTIPLATFORM || ARCH_MSM || \ - PLAT_SAMSUNG || ARCH_EFM32 || \ + PLAT_SAMSUNG || ARM_SINGLE_ARMV7M || \ ARCH_SHMOBILE_LEGACY default "mach/uncompress.h" @@ -1590,7 +1635,7 @@ config PID_IN_CONTEXTIDR config DEBUG_SET_MODULE_RONX bool "Set loadable kernel module data as NX and text as RO" - depends on MODULES + depends on MODULES && MMU ---help--- This option helps catch unintended modifications to loadable kernel module's text and read-only data. It also prevents execution diff --git a/arch/arm/Makefile b/arch/arm/Makefile index 985227cbb..7451b447c 100644 --- a/arch/arm/Makefile +++ b/arch/arm/Makefile @@ -19,6 +19,10 @@ LDFLAGS_vmlinux += --be8 LDFLAGS_MODULE += --be8 endif +ifeq ($(CONFIG_ARM_MODULE_PLTS),y) +LDFLAGS_MODULE += -T $(srctree)/arch/arm/kernel/module.lds +endif + OBJCOPYFLAGS :=-O binary -R .comment -S GZFLAGS :=-9 #KBUILD_CFLAGS +=-pipe @@ -167,6 +171,7 @@ machine-$(CONFIG_ARCH_IOP33X) += iop33x machine-$(CONFIG_ARCH_IXP4XX) += ixp4xx machine-$(CONFIG_ARCH_KEYSTONE) += keystone machine-$(CONFIG_ARCH_KS8695) += ks8695 +machine-$(CONFIG_ARCH_LPC18XX) += lpc18xx machine-$(CONFIG_ARCH_LPC32XX) += lpc32xx machine-$(CONFIG_ARCH_MESON) += meson machine-$(CONFIG_ARCH_MMP) += mmp @@ -196,14 +201,17 @@ machine-$(CONFIG_ARCH_SHMOBILE) += shmobile machine-$(CONFIG_ARCH_SIRF) += prima2 machine-$(CONFIG_ARCH_SOCFPGA) += socfpga machine-$(CONFIG_ARCH_STI) += sti +machine-$(CONFIG_ARCH_STM32) += stm32 machine-$(CONFIG_ARCH_SUNXI) += sunxi machine-$(CONFIG_ARCH_TEGRA) += tegra machine-$(CONFIG_ARCH_U300) += u300 machine-$(CONFIG_ARCH_U8500) += ux500 +machine-$(CONFIG_ARCH_UNIPHIER) += uniphier machine-$(CONFIG_ARCH_VERSATILE) += versatile machine-$(CONFIG_ARCH_VEXPRESS) += vexpress machine-$(CONFIG_ARCH_VT8500) += vt8500 machine-$(CONFIG_ARCH_W90X900) += w90x900 +machine-$(CONFIG_ARCH_ZX) += zx machine-$(CONFIG_ARCH_ZYNQ) += zynq machine-$(CONFIG_PLAT_SPEAR) += spear @@ -304,6 +312,9 @@ INSTALL_TARGETS = zinstall uinstall install PHONY += bzImage $(BOOT_TARGETS) $(INSTALL_TARGETS) +bootpImage uImage: zImage +zImage: Image + $(BOOT_TARGETS): vmlinux $(Q)$(MAKE) $(build)=$(boot) MACHINE=$(MACHINE) $(boot)/$@ diff --git a/arch/arm/boot/compressed/Makefile b/arch/arm/boot/compressed/Makefile index 6e1fb2b2e..7a13aebac 100644 --- a/arch/arm/boot/compressed/Makefile +++ b/arch/arm/boot/compressed/Makefile @@ -103,6 +103,8 @@ extra-y += piggy.gzip piggy.lzo piggy.lzma piggy.xzkern piggy.lz4 \ lib1funcs.S ashldi3.S bswapsdi2.S $(libfdt) $(libfdt_hdrs) \ hyp-stub.S +KBUILD_CFLAGS += -DDISABLE_BRANCH_PROFILING + ifeq ($(CONFIG_FUNCTION_TRACER),y) ORIG_CFLAGS := $(KBUILD_CFLAGS) KBUILD_CFLAGS = $(subst -pg, , $(ORIG_CFLAGS)) diff --git a/arch/arm/boot/compressed/head.S b/arch/arm/boot/compressed/head.S index 2c45b5709..06e983f59 100644 --- a/arch/arm/boot/compressed/head.S +++ b/arch/arm/boot/compressed/head.S @@ -130,7 +130,7 @@ start: .endr ARM( mov r0, r0 ) ARM( b 1f ) - THUMB( adr r12, BSYM(1f) ) + THUMB( badr r12, 1f ) THUMB( bx r12 ) .word _magic_sig @ Magic numbers to help the loader @@ -447,7 +447,7 @@ dtb_check_done: bl cache_clean_flush - adr r0, BSYM(restart) + badr r0, restart add r0, r0, r6 mov pc, r0 diff --git a/arch/arm/boot/compressed/libfdt_env.h b/arch/arm/boot/compressed/libfdt_env.h index 1f4e71876..17ae0f3ef 100644 --- a/arch/arm/boot/compressed/libfdt_env.h +++ b/arch/arm/boot/compressed/libfdt_env.h @@ -5,6 +5,10 @@ #include <linux/string.h> #include <asm/byteorder.h> +typedef __be16 fdt16_t; +typedef __be32 fdt32_t; +typedef __be64 fdt64_t; + #define fdt16_to_cpu(x) be16_to_cpu(x) #define cpu_to_fdt16(x) cpu_to_be16(x) #define fdt32_to_cpu(x) be32_to_cpu(x) diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index 992736b52..246473a24 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -20,9 +20,9 @@ dtb-$(CONFIG_SOC_SAM_V4_V5) += \ tny_a9263.dtb \ usb_a9263.dtb \ at91-foxg20.dtb \ + at91-kizbox.dtb \ at91sam9g20ek.dtb \ at91sam9g20ek_2mmc.dtb \ - kizbox.dtb \ tny_a9g20.dtb \ usb_a9g20.dtb \ usb_a9g20_lpw.dtb \ @@ -31,13 +31,16 @@ dtb-$(CONFIG_SOC_SAM_V4_V5) += \ at91sam9n12ek.dtb \ at91sam9rlek.dtb \ at91-ariag25.dtb \ + at91-ariettag25.dtb \ at91-cosino_mega2560.dtb \ + at91-kizboxmini.dtb \ at91sam9g15ek.dtb \ at91sam9g25ek.dtb \ at91sam9g35ek.dtb \ at91sam9x25ek.dtb \ at91sam9x35ek.dtb dtb-$(CONFIG_SOC_SAM_V7) += \ + at91-kizbox2.dtb \ at91-sama5d3_xplained.dtb \ sama5d31ek.dtb \ sama5d33ek.dtb \ @@ -56,13 +59,18 @@ dtb-$(CONFIG_ARCH_BCM2835) += \ bcm2835-rpi-b.dtb \ bcm2835-rpi-b-plus.dtb dtb-$(CONFIG_ARCH_BCM_5301X) += \ + bcm4708-asus-rt-ac56u.dtb \ + bcm4708-asus-rt-ac68u.dtb \ bcm4708-buffalo-wzr-1750dhp.dtb \ bcm4708-luxul-xwc-1000.dtb \ bcm4708-netgear-r6250.dtb \ bcm4708-netgear-r6300-v2.dtb \ + bcm4708-smartrg-sr400ac.dtb \ bcm47081-asus-rt-n18u.dtb \ bcm47081-buffalo-wzr-600dhp2.dtb \ bcm47081-buffalo-wzr-900dhp.dtb \ + bcm4709-asus-rt-ac87u.dtb \ + bcm4709-buffalo-wxr-1900dhp.dtb \ bcm4709-netgear-r8000.dtb dtb-$(CONFIG_ARCH_BCM_63XX) += \ bcm963138dvt.dtb @@ -113,6 +121,7 @@ dtb-$(CONFIG_ARCH_EXYNOS5) += \ exynos5420-peach-pit.dtb \ exynos5420-smdk5420.dtb \ exynos5422-odroidxu3.dtb \ + exynos5422-odroidxu3-lite.dtb \ exynos5440-sd5v1.dtb \ exynos5440-ssdk5440.dtb \ exynos5800-peach-pi.dtb @@ -201,6 +210,9 @@ dtb-$(CONFIG_MACH_KIRKWOOD) += \ kirkwood-ts219-6282.dtb \ kirkwood-ts419-6281.dtb \ kirkwood-ts419-6282.dtb +dtb-$(CONFIG_ARCH_LPC18XX) += \ + lpc4350-hitex-eval.dtb \ + lpc4357-ea4357-devkit.dtb dtb-$(CONFIG_ARCH_LPC32XX) += \ ea3250.dtb phy3250.dtb dtb-$(CONFIG_MACH_MESON6) += \ @@ -254,14 +266,18 @@ dtb-$(CONFIG_SOC_IMX53) += \ imx53-tx53-x13x.dtb \ imx53-voipac-bsb.dtb dtb-$(CONFIG_SOC_IMX6Q) += \ + imx6dl-apf6dev.dtb \ imx6dl-aristainetos_4.dtb \ imx6dl-aristainetos_7.dtb \ + imx6dl-aristainetos2_4.dtb \ + imx6dl-aristainetos2_7.dtb \ imx6dl-cubox-i.dtb \ imx6dl-dfi-fs700-m60.dtb \ imx6dl-gw51xx.dtb \ imx6dl-gw52xx.dtb \ imx6dl-gw53xx.dtb \ imx6dl-gw54xx.dtb \ + imx6dl-gw551x.dtb \ imx6dl-gw552x.dtb \ imx6dl-hummingboard.dtb \ imx6dl-nitrogen6x.dtb \ @@ -277,6 +293,7 @@ dtb-$(CONFIG_SOC_IMX6Q) += \ imx6dl-udoo.dtb \ imx6dl-wandboard.dtb \ imx6dl-wandboard-revb1.dtb \ + imx6q-apf6dev.dtb \ imx6q-arm2.dtb \ imx6q-cm-fx6.dtb \ imx6q-cubox-i.dtb \ @@ -288,6 +305,7 @@ dtb-$(CONFIG_SOC_IMX6Q) += \ imx6q-gw53xx.dtb \ imx6q-gw5400-a.dtb \ imx6q-gw54xx.dtb \ + imx6q-gw551x.dtb \ imx6q-gw552x.dtb \ imx6q-hummingboard.dtb \ imx6q-nitrogen6x.dtb \ @@ -313,12 +331,15 @@ dtb-$(CONFIG_SOC_IMX6SX) += \ imx6sx-sabreauto.dtb \ imx6sx-sdb-reva.dtb \ imx6sx-sdb.dtb +dtb-$(CONFIG_SOC_IMX7D) += \ + imx7d-sdb.dtb dtb-$(CONFIG_SOC_LS1021A) += \ ls1021a-qds.dtb \ ls1021a-twr.dtb dtb-$(CONFIG_SOC_VF610) += \ vf500-colibri-eval-v3.dtb \ vf610-colibri-eval-v3.dtb \ + vf610m4-colibri.dtb \ vf610-cosmic.dtb \ vf610-twr.dtb dtb-$(CONFIG_ARCH_MXS) += \ @@ -360,6 +381,7 @@ dtb-$(CONFIG_ARCH_OMAP3) += \ am3517-craneboard.dtb \ am3517-evm.dtb \ am3517_mt_ventoux.dtb \ + logicpd-torpedo-37xx-devkit.dtb \ omap3430-sdp.dtb \ omap3-beagle.dtb \ omap3-beagle-xm.dtb \ @@ -406,9 +428,11 @@ dtb-$(CONFIG_ARCH_OMAP3) += \ dtb-$(CONFIG_SOC_TI81XX) += \ dm8168-evm.dtb dtb-$(CONFIG_SOC_AM33XX) += \ + am335x-baltos-ir5221.dtb \ am335x-base0033.dtb \ am335x-bone.dtb \ am335x-boneblack.dtb \ + am335x-sl50.dtb \ am335x-evm.dtb \ am335x-evmsk.dtb \ am335x-nano.dtb \ @@ -496,7 +520,7 @@ dtb-$(CONFIG_ARCH_SHMOBILE_MULTI) += \ sh73a0-kzm9g.dtb dtb-$(CONFIG_ARCH_SOCFPGA) += \ socfpga_arria5_socdk.dtb \ - socfpga_arria10_socdk.dtb \ + socfpga_arria10_socdk_sdmmc.dtb \ socfpga_cyclone5_socdk.dtb \ socfpga_cyclone5_sockit.dtb \ socfpga_cyclone5_socrates.dtb \ @@ -520,32 +544,39 @@ dtb-$(CONFIG_ARCH_STI) += \ stih416-b2020.dtb \ stih416-b2020e.dtb \ stih418-b2199.dtb +dtb-$(CONFIG_ARCH_STM32)+= stm32f429-disco.dtb dtb-$(CONFIG_MACH_SUN4I) += \ sun4i-a10-a1000.dtb \ sun4i-a10-ba10-tvbox.dtb \ sun4i-a10-chuwi-v7-cw0825.dtb \ sun4i-a10-cubieboard.dtb \ + sun4i-a10-gemei-g9.dtb \ + sun4i-a10-hackberry.dtb \ + sun4i-a10-hyundai-a7hd.dtb \ + sun4i-a10-inet97fv2.dtb \ + sun4i-a10-jesurun-q5.dtb \ sun4i-a10-marsboard.dtb \ sun4i-a10-mini-xplus.dtb \ sun4i-a10-mk802.dtb \ sun4i-a10-mk802ii.dtb \ - sun4i-a10-hackberry.dtb \ - sun4i-a10-hyundai-a7hd.dtb \ - sun4i-a10-inet97fv2.dtb \ sun4i-a10-olinuxino-lime.dtb \ sun4i-a10-pcduino.dtb dtb-$(CONFIG_MACH_SUN5I) += \ + sun5i-a10s-auxtek-t004.dtb \ sun5i-a10s-mk802.dtb \ sun5i-a10s-olinuxino-micro.dtb \ sun5i-a10s-r7-tv-dongle.dtb \ sun5i-a13-hsg-h702.dtb \ sun5i-a13-olinuxino.dtb \ - sun5i-a13-olinuxino-micro.dtb + sun5i-a13-olinuxino-micro.dtb \ + sun5i-a13-utoo-p66.dtb dtb-$(CONFIG_MACH_SUN6I) += \ sun6i-a31-app4-evb1.dtb \ sun6i-a31-colombus.dtb \ sun6i-a31-hummingbird.dtb \ + sun6i-a31-i7.dtb \ sun6i-a31-m9.dtb \ + sun6i-a31-mele-a1000g-quad.dtb \ sun6i-a31s-cs908.dtb dtb-$(CONFIG_MACH_SUN7I) += \ sun7i-a20-bananapi.dtb \ @@ -555,15 +586,25 @@ dtb-$(CONFIG_MACH_SUN7I) += \ sun7i-a20-hummingbird.dtb \ sun7i-a20-i12-tvbox.dtb \ sun7i-a20-m3.dtb \ + sun7i-a20-mk808c.dtb \ sun7i-a20-olinuxino-lime.dtb \ sun7i-a20-olinuxino-lime2.dtb \ sun7i-a20-olinuxino-micro.dtb \ - sun7i-a20-pcduino3.dtb + sun7i-a20-orangepi.dtb \ + sun7i-a20-orangepi-mini.dtb \ + sun7i-a20-pcduino3.dtb \ + sun7i-a20-pcduino3-nano.dtb \ + sun7i-a20-wexler-tab7200.dtb dtb-$(CONFIG_MACH_SUN8I) += \ + sun8i-a23-evb.dtb \ sun8i-a23-ippo-q8h-v5.dtb \ - sun8i-a23-ippo-q8h-v1.2.dtb + sun8i-a23-ippo-q8h-v1.2.dtb \ + sun8i-a33-et-q8-v1.6.dtb \ + sun8i-a33-ga10h-v1.1.dtb \ + sun8i-a33-sinlinx-sina33.dtb dtb-$(CONFIG_MACH_SUN9I) += \ - sun9i-a80-optimus.dtb + sun9i-a80-optimus.dtb \ + sun9i-a80-cubieboard4.dtb dtb-$(CONFIG_ARCH_TEGRA_2x_SOC) += \ tegra20-harmony.dtb \ tegra20-iris-512.dtb \ @@ -600,6 +641,11 @@ dtb-$(CONFIG_ARCH_U8500) += \ ste-hrefv60plus-tvk.dtb \ ste-ccu8540.dtb \ ste-ccu9540.dtb +dtb-$(CONFIG_ARCH_UNIPHIER) += \ + uniphier-ph1-sld3-ref.dtb \ + uniphier-ph1-ld4-ref.dtb \ + uniphier-ph1-pro4-ref.dtb \ + uniphier-ph1-sld8-ref.dtb dtb-$(CONFIG_ARCH_VERSATILE) += \ versatile-ab.dtb \ versatile-pb.dtb @@ -624,6 +670,7 @@ dtb-$(CONFIG_ARCH_ZYNQ) += \ zynq-zybo.dtb dtb-$(CONFIG_MACH_ARMADA_370) += \ armada-370-db.dtb \ + armada-370-dlink-dns327l.dtb \ armada-370-mirabox.dtb \ armada-370-netgear-rn102.dtb \ armada-370-netgear-rn104.dtb \ @@ -633,6 +680,8 @@ dtb-$(CONFIG_MACH_ARMADA_375) += \ armada-375-db.dtb dtb-$(CONFIG_MACH_ARMADA_38X) += \ armada-385-db-ap.dtb \ + armada-385-linksys-caiman.dtb \ + armada-385-linksys-cobra.dtb \ armada-388-db.dtb \ armada-388-gp.dtb \ armada-388-rd.dtb @@ -649,17 +698,18 @@ dtb-$(CONFIG_MACH_ARMADA_XP) += \ armada-xp-openblocks-ax3-4.dtb \ armada-xp-synology-ds414.dtb dtb-$(CONFIG_MACH_DOVE) += \ - dove-cm-a510.dtb \ dove-cubox.dtb \ dove-cubox-es.dtb \ dove-d2plug.dtb \ dove-d3plug.dtb \ - dove-dove-db.dtb + dove-dove-db.dtb \ + dove-sbc-a510.dtb dtb-$(CONFIG_ARCH_MEDIATEK) += \ mt6589-aquaris5.dtb \ mt6592-evb.dtb \ mt8127-moose.dtb \ mt8135-evbp1.dtb +dtb-$(CONFIG_ARCH_ZX) += zx296702-ad1.dtb endif always := $(dtb-y) diff --git a/arch/arm/boot/dts/am335x-baltos-ir5221.dts b/arch/arm/boot/dts/am335x-baltos-ir5221.dts new file mode 100644 index 000000000..7d3660169 --- /dev/null +++ b/arch/arm/boot/dts/am335x-baltos-ir5221.dts @@ -0,0 +1,532 @@ +/* + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +/* + * VScom OnRISC + * http://www.vscom.de + */ + +/dts-v1/; + +#include "am33xx.dtsi" +#include <dt-bindings/pwm/pwm.h> +#include <dt-bindings/interrupt-controller/irq.h> + +/ { + model = "OnRISC Baltos iR 5221"; + compatible = "vscom,onrisc", "ti,am33xx"; + + cpus { + cpu@0 { + cpu0-supply = <&vdd1_reg>; + }; + }; + + memory { + device_type = "memory"; + reg = <0x80000000 0x10000000>; /* 256 MB */ + }; + + vbat: fixedregulator@0 { + compatible = "regulator-fixed"; + regulator-name = "vbat"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-boot-on; + }; + + wl12xx_vmmc: fixedregulator@2 { + pinctrl-names = "default"; + pinctrl-0 = <&wl12xx_gpio>; + compatible = "regulator-fixed"; + regulator-name = "vwl1271"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio3 8 0>; + startup-delay-us = <70000>; + enable-active-high; + }; +}; + +&am33xx_pinmux { + mmc2_pins: pinmux_mmc2_pins { + pinctrl-single,pins = < + 0x020 (PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_ad8.mmc1_dat0_mux0 */ + 0x024 (PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_ad9.mmc1_dat1_mux0 */ + 0x028 (PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_ad10.mmc1_dat2_mux0 */ + 0x02c (PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_ad11.mmc1_dat3_mux0 */ + 0x080 (PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_csn1.mmc1_clk_mux0 */ + 0x084 (PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_csn2.mmc1_cmd_mux0 */ + 0x1e4 (PIN_INPUT_PULLUP | MUX_MODE7) /* emu0.gpio3[7] */ + >; + }; + + wl12xx_gpio: pinmux_wl12xx_gpio { + pinctrl-single,pins = < + 0x1e8 (PIN_OUTPUT_PULLUP | MUX_MODE7) /* emu1.gpio3[8] */ + >; + }; + + tps65910_pins: pinmux_tps65910_pins { + pinctrl-single,pins = < + 0x078 (PIN_INPUT_PULLUP | MUX_MODE7) /* gpmc_ben1.gpio1[28] */ + >; + }; + + tca6416_pins: pinmux_tca6416_pins { + pinctrl-single,pins = < + 0x1b4 (PIN_INPUT_PULLUP | MUX_MODE7) /* xdma_event_intr1.gpio0[20] tca6416 stuff */ + >; + }; + + i2c1_pins: pinmux_i2c1_pins { + pinctrl-single,pins = < + 0x158 0x2a /* spi0_d1.i2c1_sda_mux3, INPUT | MODE2 */ + 0x15c 0x2a /* spi0_cs0.i2c1_scl_mux3, INPUT | MODE2 */ + >; + }; + + dcan1_pins: pinmux_dcan1_pins { + pinctrl-single,pins = < + 0x168 0x0a /* uart0_ctsn.dcan1_tx_mux0, OUTPUT | MODE2 */ + 0x16c 0x2a /* uart0_rtsn.dcan1_rx_mux0, INPUT | MODE2 */ + >; + }; + + uart0_pins: pinmux_uart0_pins { + pinctrl-single,pins = < + 0x170 (PIN_INPUT_PULLUP | MUX_MODE0) /* uart0_rxd.uart0_rxd */ + 0x174 (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* uart0_txd.uart0_txd */ + >; + }; + + uart1_pins: pinmux_uart1_pins { + pinctrl-single,pins = < + 0x180 0x28 /* uart1_rxd, INPUT | MODE0 */ + 0x184 0x28 /* uart1_txd, INPUT | MODE0 */ + /*0x178 0x28*/ /* uart1_ctsn, INPUT | MODE0 */ + /*0x17c 0x08*/ /* uart1_rtsn, OUTPUT | MODE0 */ + 0x178 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* uart1_ctsn, INPUT | MODE0 */ + 0x17c (PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* uart1_rtsn, OUTPUT | MODE0 */ + 0x0e0 (PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* lcd_vsync.gpio2[22] DTR */ + 0x0e4 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* lcd_hsync.gpio2[23] DSR */ + 0x0e8 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* lcd_pclk.gpio2[24] DCD */ + 0x0ec (PIN_INPUT_PULLDOWN | MUX_MODE7) /* lcd_ac_bias_en.gpio2[25] RI */ + >; + }; + + uart2_pins: pinmux_uart2_pins { + pinctrl-single,pins = < + 0x150 0x29 /* spi0_sclk.uart2_rxd_mux3, INPUT | MODE1 */ + 0x154 0x09 /* spi0_d0.uart2_txd_mux3, OUTPUT | MODE1 */ + /*0x188 0x2a*/ /* i2c0_sda.uart2_ctsn_mux0, INPUT | MODE2 */ + /*0x18c 0x2a*/ /* i2c0_scl.uart2_rtsn_mux0, INPUT | MODE2 */ + 0x188 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* i2c0_sda.uart2_ctsn_mux0 */ + 0x18c (PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* i2c0_scl.uart2_rtsn_mux0 */ + 0x030 (PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad12.gpio1[12] DTR */ + 0x034 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad13.gpio1[13] DSR */ + 0x038 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad14.gpio1[14] DCD */ + 0x03c (PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad15.gpio1[15] RI */ + + 0x1a0 (PIN_INPUT_PULLUP | MUX_MODE7) /* mcasp0_aclkr.gpio3[18], INPUT_PULLDOWN | MODE7 */ + >; + }; + + cpsw_default: cpsw_default { + pinctrl-single,pins = < + /* Slave 1 */ + 0x10c (PIN_INPUT_PULLDOWN | MUX_MODE1) /* mii1_crs.rmii1_crs_dv */ + 0x114 (PIN_OUTPUT_PULLDOWN | MUX_MODE1) /* mii1_tx_en.rmii1_txen */ + 0x124 (PIN_OUTPUT_PULLDOWN | MUX_MODE1) /* mii1_txd1.rmii1_txd1 */ + 0x128 (PIN_OUTPUT_PULLDOWN | MUX_MODE1) /* mii1_txd0.rmii1_txd0 */ + 0x13c (PIN_INPUT_PULLDOWN | MUX_MODE1) /* mii1_rxd1.rmii1_rxd1 */ + 0x140 (PIN_INPUT_PULLDOWN | MUX_MODE1) /* mii1_rxd0.rmii1_rxd0 */ + 0x144 (PIN_INPUT_PULLDOWN | MUX_MODE0) /* rmii1_ref_clk.rmii1_refclk */ + + + /* Slave 2 */ + 0x40 (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* gpmc_a0.rgmii2_tctl */ + 0x44 (PIN_INPUT_PULLDOWN | MUX_MODE2) /* gpmc_a1.rgmii2_rctl */ + 0x48 (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* gpmc_a2.rgmii2_td3 */ + 0x4c (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* gpmc_a3.rgmii2_td2 */ + 0x50 (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* gpmc_a4.rgmii2_td1 */ + 0x54 (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* gpmc_a5.rgmii2_td0 */ + 0x58 (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* gpmc_a6.rgmii2_tclk */ + 0x5c (PIN_INPUT_PULLDOWN | MUX_MODE2) /* gpmc_a7.rgmii2_rclk */ + 0x60 (PIN_INPUT_PULLDOWN | MUX_MODE2) /* gpmc_a8.rgmii2_rd3 */ + 0x64 (PIN_INPUT_PULLDOWN | MUX_MODE2) /* gpmc_a9.rgmii2_rd2 */ + 0x68 (PIN_INPUT_PULLDOWN | MUX_MODE2) /* gpmc_a10.rgmii2_rd1 */ + 0x6c (PIN_INPUT_PULLDOWN | MUX_MODE2) /* gpmc_a11.rgmii2_rd0 */ + >; + }; + + cpsw_sleep: cpsw_sleep { + pinctrl-single,pins = < + /* Slave 1 reset value */ + 0x10c (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x114 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x124 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x128 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x13c (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x140 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x144 (PIN_INPUT_PULLDOWN | MUX_MODE7) + + /* Slave 2 reset value*/ + 0x40 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x44 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x48 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x4c (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x50 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x54 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x58 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x5c (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x60 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x64 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x68 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x6c (PIN_INPUT_PULLDOWN | MUX_MODE7) + >; + }; + + davinci_mdio_default: davinci_mdio_default { + pinctrl-single,pins = < + /* MDIO */ + 0x148 (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0) /* mdio_data.mdio_data */ + 0x14c (PIN_OUTPUT_PULLUP | MUX_MODE0) /* mdio_clk.mdio_clk */ + >; + }; + + davinci_mdio_sleep: davinci_mdio_sleep { + pinctrl-single,pins = < + /* MDIO reset value */ + 0x148 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x14c (PIN_INPUT_PULLDOWN | MUX_MODE7) + >; + }; + + nandflash_pins_s0: nandflash_pins_s0 { + pinctrl-single,pins = < + 0x0 (PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad0.gpmc_ad0 */ + 0x4 (PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad1.gpmc_ad1 */ + 0x8 (PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad2.gpmc_ad2 */ + 0xc (PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad3.gpmc_ad3 */ + 0x10 (PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad4.gpmc_ad4 */ + 0x14 (PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad5.gpmc_ad5 */ + 0x18 (PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad6.gpmc_ad6 */ + 0x1c (PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad7.gpmc_ad7 */ + 0x70 (PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_wait0.gpmc_wait0 */ + 0x74 (PIN_INPUT_PULLUP | MUX_MODE7) /* gpmc_wpn.gpio0_30 */ + 0x7c (PIN_OUTPUT | MUX_MODE0) /* gpmc_csn0.gpmc_csn0 */ + 0x90 (PIN_OUTPUT | MUX_MODE0) /* gpmc_advn_ale.gpmc_advn_ale */ + 0x94 (PIN_OUTPUT | MUX_MODE0) /* gpmc_oen_ren.gpmc_oen_ren */ + 0x98 (PIN_OUTPUT | MUX_MODE0) /* gpmc_wen.gpmc_wen */ + 0x9c (PIN_OUTPUT | MUX_MODE0) /* gpmc_be0n_cle.gpmc_be0n_cle */ + >; + }; +}; + +&elm { + status = "okay"; +}; + +&gpmc { + pinctrl-names = "default"; + pinctrl-0 = <&nandflash_pins_s0>; + ranges = <0 0 0x08000000 0x10000000>; /* CS0: NAND */ + status = "okay"; + + nand@0,0 { + reg = <0 0 0>; /* CS0, offset 0 */ + nand-bus-width = <8>; + ti,nand-ecc-opt = "bch8"; + ti,nand-xfer-type = "polled"; + + gpmc,device-nand = "true"; + gpmc,device-width = <1>; + gpmc,sync-clk-ps = <0>; + gpmc,cs-on-ns = <0>; + gpmc,cs-rd-off-ns = <44>; + gpmc,cs-wr-off-ns = <44>; + gpmc,adv-on-ns = <6>; + gpmc,adv-rd-off-ns = <34>; + gpmc,adv-wr-off-ns = <44>; + gpmc,we-on-ns = <0>; + gpmc,we-off-ns = <40>; + gpmc,oe-on-ns = <0>; + gpmc,oe-off-ns = <54>; + gpmc,access-ns = <64>; + gpmc,rd-cycle-ns = <82>; + gpmc,wr-cycle-ns = <82>; + gpmc,wait-on-read = "true"; + gpmc,wait-on-write = "true"; + gpmc,bus-turnaround-ns = <0>; + gpmc,cycle2cycle-delay-ns = <0>; + gpmc,clk-activation-ns = <0>; + gpmc,wait-monitoring-ns = <0>; + gpmc,wr-access-ns = <40>; + gpmc,wr-data-mux-bus-ns = <0>; + + #address-cells = <1>; + #size-cells = <1>; + elm_id = <&elm>; + }; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pins>; + + status = "okay"; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&uart1_pins>; + dtr-gpios = <&gpio2 22 GPIO_ACTIVE_LOW>; + dsr-gpios = <&gpio2 23 GPIO_ACTIVE_LOW>; + dcd-gpios = <&gpio2 24 GPIO_ACTIVE_LOW>; + rng-gpios = <&gpio2 25 GPIO_ACTIVE_LOW>; + cts-gpios = <&gpio0 12 GPIO_ACTIVE_LOW>; + rts-gpios = <&gpio0 13 GPIO_ACTIVE_LOW>; + + status = "okay"; +}; + +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&uart2_pins>; + dtr-gpios = <&gpio1 12 GPIO_ACTIVE_LOW>; + dsr-gpios = <&gpio1 13 GPIO_ACTIVE_LOW>; + dcd-gpios = <&gpio1 14 GPIO_ACTIVE_LOW>; + rng-gpios = <&gpio1 15 GPIO_ACTIVE_LOW>; + cts-gpios = <&gpio3 5 GPIO_ACTIVE_LOW>; + rts-gpios = <&gpio3 6 GPIO_ACTIVE_LOW>; + + status = "okay"; +}; + +&i2c1 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_pins>; + + status = "okay"; + clock-frequency = <400000>; + + tps: tps@2d { + reg = <0x2d>; + gpio-controller; + #gpio-cells = <2>; + interrupt-parent = <&gpio1>; + interrupts = <28 GPIO_ACTIVE_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&tps65910_pins>; + }; + + at24@50 { + compatible = "at24,24c02"; + pagesize = <8>; + reg = <0x50>; + }; + + tca6416: gpio@20 { + compatible = "ti,tca6416"; + reg = <0x20>; + gpio-controller; + #gpio-cells = <2>; + interrupt-parent = <&gpio0>; + interrupts = <20 GPIO_ACTIVE_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&tca6416_pins>; + }; +}; + +&usb { + status = "okay"; +}; + +&usb_ctrl_mod { + status = "okay"; +}; + +&usb0_phy { + status = "okay"; +}; + +&usb1_phy { + status = "okay"; +}; + +&usb0 { + status = "okay"; + dr_mode = "host"; +}; + +&usb1 { + status = "okay"; + dr_mode = "otg"; +}; + +&cppi41dma { + status = "okay"; +}; + +#include "tps65910.dtsi" + +&tps { + vcc1-supply = <&vbat>; + vcc2-supply = <&vbat>; + vcc3-supply = <&vbat>; + vcc4-supply = <&vbat>; + vcc5-supply = <&vbat>; + vcc6-supply = <&vbat>; + vcc7-supply = <&vbat>; + vccio-supply = <&vbat>; + + ti,en-ck32k-xtal = <1>; + + regulators { + vrtc_reg: regulator@0 { + regulator-always-on; + }; + + vio_reg: regulator@1 { + regulator-always-on; + }; + + vdd1_reg: regulator@2 { + /* VDD_MPU voltage limits 0.95V - 1.26V with +/-4% tolerance */ + regulator-name = "vdd_mpu"; + regulator-min-microvolt = <912500>; + regulator-max-microvolt = <1312500>; + regulator-boot-on; + regulator-always-on; + }; + + vdd2_reg: regulator@3 { + /* VDD_CORE voltage limits 0.95V - 1.1V with +/-4% tolerance */ + regulator-name = "vdd_core"; + regulator-min-microvolt = <912500>; + regulator-max-microvolt = <1150000>; + regulator-boot-on; + regulator-always-on; + }; + + vdd3_reg: regulator@4 { + regulator-always-on; + }; + + vdig1_reg: regulator@5 { + regulator-always-on; + }; + + vdig2_reg: regulator@6 { + regulator-always-on; + }; + + vpll_reg: regulator@7 { + regulator-always-on; + }; + + vdac_reg: regulator@8 { + regulator-always-on; + }; + + vaux1_reg: regulator@9 { + regulator-always-on; + }; + + vaux2_reg: regulator@10 { + regulator-always-on; + }; + + vaux33_reg: regulator@11 { + regulator-always-on; + }; + + vmmc_reg: regulator@12 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + }; +}; + +&mac { + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&cpsw_default>; + pinctrl-1 = <&cpsw_sleep>; + dual_emac = <1>; + + status = "okay"; +}; + +&davinci_mdio { + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&davinci_mdio_default>; + pinctrl-1 = <&davinci_mdio_sleep>; + + status = "okay"; +}; + +&cpsw_emac0 { + phy_id = <&davinci_mdio>, <0>; + phy-mode = "rmii"; + dual_emac_res_vlan = <1>; +}; + +&cpsw_emac1 { + phy_id = <&davinci_mdio>, <7>; + phy-mode = "rgmii-txid"; + dual_emac_res_vlan = <2>; +}; + +&phy_sel { + rmii-clock-ext = <1>; +}; + +&mmc1 { + vmmc-supply = <&vmmc_reg>; + status = "okay"; +}; + +&mmc2 { + status = "okay"; + vmmc-supply = <&wl12xx_vmmc>; + ti,non-removable; + bus-width = <4>; + cap-power-off-card; + pinctrl-names = "default"; + pinctrl-0 = <&mmc2_pins>; + + #address-cells = <1>; + #size-cells = <0>; + wlcore: wlcore@2 { + compatible = "ti,wl1835"; + reg = <2>; + interrupt-parent = <&gpio3>; + interrupts = <7 IRQ_TYPE_LEVEL_HIGH>; + }; +}; + +&sham { + status = "okay"; +}; + +&aes { + status = "okay"; +}; + +&gpio0 { + ti,no-reset-on-init; +}; + +&dcan1 { + pinctrl-names = "default"; + pinctrl-0 = <&dcan1_pins>; + + status = "okay"; +}; diff --git a/arch/arm/boot/dts/am335x-bone-common.dtsi b/arch/arm/boot/dts/am335x-bone-common.dtsi index dbb3f4d2b..fec78349c 100644 --- a/arch/arm/boot/dts/am335x-bone-common.dtsi +++ b/arch/arm/boot/dts/am335x-bone-common.dtsi @@ -81,6 +81,13 @@ >; }; + i2c2_pins: pinmux_i2c2_pins { + pinctrl-single,pins = < + 0x178 (PIN_INPUT_PULLUP | MUX_MODE3) /* uart1_ctsn.i2c2_sda */ + 0x17c (PIN_INPUT_PULLUP | MUX_MODE3) /* uart1_rtsn.i2c2_scl */ + >; + }; + uart0_pins: pinmux_uart0_pins { pinctrl-single,pins = < 0x170 (PIN_INPUT_PULLUP | MUX_MODE0) /* uart0_rxd.uart0_rxd */ @@ -218,8 +225,67 @@ reg = <0x24>; }; + baseboard_eeprom: baseboard_eeprom@50 { + compatible = "at,24c256"; + reg = <0x50>; + + #address-cells = <1>; + #size-cells = <1>; + baseboard_data: baseboard_data@0 { + reg = <0 0x100>; + }; + }; +}; + +&i2c2 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c2_pins>; + + status = "okay"; + clock-frequency = <100000>; + + cape_eeprom0: cape_eeprom0@54 { + compatible = "at,24c256"; + reg = <0x54>; + #address-cells = <1>; + #size-cells = <1>; + cape0_data: cape_data@0 { + reg = <0 0x100>; + }; + }; + + cape_eeprom1: cape_eeprom1@55 { + compatible = "at,24c256"; + reg = <0x55>; + #address-cells = <1>; + #size-cells = <1>; + cape1_data: cape_data@0 { + reg = <0 0x100>; + }; + }; + + cape_eeprom2: cape_eeprom2@56 { + compatible = "at,24c256"; + reg = <0x56>; + #address-cells = <1>; + #size-cells = <1>; + cape2_data: cape_data@0 { + reg = <0 0x100>; + }; + }; + + cape_eeprom3: cape_eeprom3@57 { + compatible = "at,24c256"; + reg = <0x57>; + #address-cells = <1>; + #size-cells = <1>; + cape3_data: cape_data@0 { + reg = <0 0x100>; + }; + }; }; + /include/ "tps65217.dtsi" &tps { diff --git a/arch/arm/boot/dts/am335x-boneblack.dts b/arch/arm/boot/dts/am335x-boneblack.dts index 901739fcb..5c42d259f 100644 --- a/arch/arm/boot/dts/am335x-boneblack.dts +++ b/arch/arm/boot/dts/am335x-boneblack.dts @@ -80,3 +80,7 @@ status = "okay"; }; }; + +&rtc { + system-power-controller; +}; diff --git a/arch/arm/boot/dts/am335x-evm.dts b/arch/arm/boot/dts/am335x-evm.dts index 66342515d..765be2766 100644 --- a/arch/arm/boot/dts/am335x-evm.dts +++ b/arch/arm/boot/dts/am335x-evm.dts @@ -8,6 +8,7 @@ /dts-v1/; #include "am33xx.dtsi" +#include <dt-bindings/interrupt-controller/irq.h> / { model = "TI AM335x EVM"; @@ -38,6 +39,20 @@ regulator-boot-on; }; + wlan_en_reg: fixedregulator@2 { + compatible = "regulator-fixed"; + regulator-name = "wlan-en-regulator"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + /* WLAN_EN GPIO for this board - Bank1, pin16 */ + gpio = <&gpio1 16 0>; + + /* WLAN card specific delay */ + startup-delay-us = <70000>; + enable-active-high; + }; + matrix_keypad: matrix_keypad@0 { compatible = "gpio-matrix-keypad"; debounce-delay-ms = <5>; @@ -176,6 +191,15 @@ >; }; + uart1_pins: pinmux_uart1_pins { + pinctrl-single,pins = < + 0x178 (PIN_INPUT | MUX_MODE0) /* uart1_ctsn.uart1_ctsn */ + 0x17C (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* uart1_rtsn.uart1_rtsn */ + 0x180 (PIN_INPUT_PULLUP | MUX_MODE0) /* uart1_rxd.uart1_rxd */ + 0x184 (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* uart1_txd.uart1_txd */ + >; + }; + clkout2_pin: pinmux_clkout2_pin { pinctrl-single,pins = < 0x1b4 (PIN_OUTPUT_PULLDOWN | MUX_MODE3) /* xdma_event_intr1.clkout2 */ @@ -266,6 +290,25 @@ >; }; + mmc3_pins: pinmux_mmc3_pins { + pinctrl-single,pins = < + 0x44 (PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_a1.mmc2_dat0, INPUT_PULLUP | MODE3 */ + 0x48 (PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_a2.mmc2_dat1, INPUT_PULLUP | MODE3 */ + 0x4C (PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_a3.mmc2_dat2, INPUT_PULLUP | MODE3 */ + 0x78 (PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_ben1.mmc2_dat3, INPUT_PULLUP | MODE3 */ + 0x88 (PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_csn3.mmc2_cmd, INPUT_PULLUP | MODE3 */ + 0x8C (PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_clk.mmc2_clk, INPUT_PULLUP | MODE3 */ + >; + }; + + wlan_pins: pinmux_wlan_pins { + pinctrl-single,pins = < + 0x40 (PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpmc_a0.gpio1_16 */ + 0x19C (PIN_INPUT | MUX_MODE7) /* mcasp0_ahclkr.gpio3_17 */ + 0x1AC (PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* mcasp0_ahclkx.gpio3_21 */ + >; + }; + lcd_pins_s0: lcd_pins_s0 { pinctrl-single,pins = < 0x20 (PIN_OUTPUT | MUX_MODE1) /* gpmc_ad8.lcd_data23 */ @@ -323,6 +366,13 @@ status = "okay"; }; +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&uart1_pins>; + + status = "okay"; +}; + &i2c0 { pinctrl-names = "default"; pinctrl-0 = <&i2c0_pins>; @@ -665,6 +715,37 @@ cd-gpios = <&gpio0 6 GPIO_ACTIVE_HIGH>; }; +&mmc3 { + /* these are on the crossbar and are outlined in the + xbar-event-map element */ + dmas = <&edma 12 + &edma 13>; + dma-names = "tx", "rx"; + status = "okay"; + vmmc-supply = <&wlan_en_reg>; + bus-width = <4>; + pinctrl-names = "default"; + pinctrl-0 = <&mmc3_pins &wlan_pins>; + ti,non-removable; + ti,needs-special-hs-handling; + cap-power-off-card; + keep-power-in-suspend; + + #address-cells = <1>; + #size-cells = <0>; + wlcore: wlcore@0 { + compatible = "ti,wl1835"; + reg = <2>; + interrupt-parent = <&gpio3>; + interrupts = <17 IRQ_TYPE_LEVEL_HIGH>; + }; +}; + +&edma { + ti,edma-xbar-event-map = /bits/ 16 <1 12 + 2 13>; +}; + &sham { status = "okay"; }; diff --git a/arch/arm/boot/dts/am335x-pepper.dts b/arch/arm/boot/dts/am335x-pepper.dts index 0d35ab646..7106114c7 100644 --- a/arch/arm/boot/dts/am335x-pepper.dts +++ b/arch/arm/boot/dts/am335x-pepper.dts @@ -74,6 +74,7 @@ audio_codec: tlv320aic3106@1b { compatible = "ti,tlv320aic3106"; reg = <0x1b>; + ai3x-micbias-vg = <0x2>; }; accel: lis331dlh@1d { @@ -153,7 +154,7 @@ ti,audio-routing = "Headphone Jack", "HPLOUT", "Headphone Jack", "HPROUT", - "LINE1L", "Line In"; + "MIC3L", "Mic3L Switch"; }; &mcasp0 { @@ -438,41 +439,50 @@ regulators { dcdc1_reg: regulator@0 { /* VDD_1V8 system supply */ + regulator-always-on; }; dcdc2_reg: regulator@1 { /* VDD_CORE voltage limits 0.95V - 1.26V with +/-4% tolerance */ regulator-name = "vdd_core"; regulator-min-microvolt = <925000>; - regulator-max-microvolt = <1325000>; + regulator-max-microvolt = <1150000>; regulator-boot-on; + regulator-always-on; }; dcdc3_reg: regulator@2 { /* VDD_MPU voltage limits 0.95V - 1.1V with +/-4% tolerance */ regulator-name = "vdd_mpu"; regulator-min-microvolt = <925000>; - regulator-max-microvolt = <1150000>; + regulator-max-microvolt = <1325000>; regulator-boot-on; + regulator-always-on; }; ldo1_reg: regulator@3 { /* VRTC 1.8V always-on supply */ + regulator-name = "vrtc,vdds"; regulator-always-on; }; ldo2_reg: regulator@4 { /* 3.3V rail */ + regulator-name = "vdd_3v3aux"; + regulator-always-on; }; ldo3_reg: regulator@5 { /* VDD_3V3A 3.3V rail */ + regulator-name = "vdd_3v3a"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; }; ldo4_reg: regulator@6 { /* VDD_3V3B 3.3V rail */ + regulator-name = "vdd_3v3b"; + regulator-always-on; }; }; }; diff --git a/arch/arm/boot/dts/am335x-sl50.dts b/arch/arm/boot/dts/am335x-sl50.dts new file mode 100644 index 000000000..3303c2816 --- /dev/null +++ b/arch/arm/boot/dts/am335x-sl50.dts @@ -0,0 +1,482 @@ +/* + * Copyright (C) 2015 Toby Churchill - http://www.toby-churchill.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +/dts-v1/; + +#include "am33xx.dtsi" + +/ { + model = "Toby Churchill SL50 Series"; + compatible = "tcl,am335x-sl50", "ti,am33xx"; + + cpus { + cpu@0 { + cpu0-supply = <&dcdc2_reg>; + }; + }; + + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&led_pins>; + + led@0 { + label = "sl50:green:usr0"; + gpios = <&gpio1 21 GPIO_ACTIVE_LOW>; + default-state = "off"; + }; + + led@1 { + label = "sl50:red:usr1"; + gpios = <&gpio1 22 GPIO_ACTIVE_LOW>; + default-state = "off"; + }; + + led@2 { + label = "sl50:green:usr2"; + gpios = <&gpio1 23 GPIO_ACTIVE_LOW>; + default-state = "off"; + }; + + led@3 { + label = "sl50:red:usr3"; + gpios = <&gpio1 24 GPIO_ACTIVE_LOW>; + default-state = "off"; + }; + }; + + backlight0: disp0 { + compatible = "pwm-backlight"; + pwms = <&ehrpwm1 0 500000 0>; + brightness-levels = <0 10 20 30 40 50 60 70 80 90 99>; + default-brightness-level = <6>; + }; + + backlight1: disp1 { + compatible = "pwm-backlight"; + pwms = <&ehrpwm1 1 500000 0>; + brightness-levels = <0 10 20 30 40 50 60 70 80 90 99>; + default-brightness-level = <6>; + }; + + sound { + compatible = "ti,da830-evm-audio"; + ti,model = "AM335x-SL50"; + ti,audio-codec = <&audio_codec>; + ti,mcasp-controller = <&mcasp0>; + ti,codec-clock-rate = <12000000>; + ti,audio-routing = + "Headphone Jack", "HPLOUT", + "Headphone Jack", "HPROUT", + "LINE1R", "Line In", + "LINE1L", "Line In"; + }; + + emmc_pwrseq: pwrseq@0 { + compatible = "mmc-pwrseq-emmc"; + pinctrl-names = "default"; + pinctrl-0 = <&emmc_pwrseq_pins>; + reset-gpios = <&gpio1 20 GPIO_ACTIVE_LOW>; + }; + + vmmcsd_fixed: fixedregulator@0 { + compatible = "regulator-fixed"; + regulator-name = "vmmcsd_fixed"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; +}; + +&am33xx_pinmux { + pinctrl-names = "default"; + pinctrl-0 = <&lwb_pins>; + + led_pins: pinmux_led_pins { + pinctrl-single,pins = < + AM33XX_IOPAD(0x854, PIN_OUTPUT | MUX_MODE7) /* gpmc_a5.gpio1_21 */ + AM33XX_IOPAD(0x858, PIN_OUTPUT | MUX_MODE7) /* gpmc_a6.gpio1_22 */ + AM33XX_IOPAD(0x85c, PIN_OUTPUT | MUX_MODE7) /* gpmc_a7.gpio1_23 */ + AM33XX_IOPAD(0x860, PIN_OUTPUT | MUX_MODE7) /* gpmc_a8.gpio1_24 */ + >; + }; + + uart0_pins: pinmux_uart0_pins { + pinctrl-single,pins = < + AM33XX_IOPAD(0x970, PIN_INPUT_PULLUP | MUX_MODE0) /* uart0_rxd.uart0_rxd */ + AM33XX_IOPAD(0x974, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* uart0_txd.uart0_txd */ + >; + }; + + uart4_pins: pinmux_uart4_pins { + pinctrl-single,pins = < + AM33XX_IOPAD(0x870, PIN_INPUT_PULLUP | MUX_MODE6) /* gpmc_wait0.uart4_rxd */ + AM33XX_IOPAD(0x874, PIN_OUTPUT_PULLDOWN | MUX_MODE6) /* gpmc_wpn.uart4_txd */ + >; + }; + + i2c0_pins: pinmux_i2c0_pins { + pinctrl-single,pins = < + AM33XX_IOPAD(0x988, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c0_sda.i2c0_sda */ + AM33XX_IOPAD(0x98c, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c0_scl.i2c0_scl */ + >; + }; + + i2c1_pins: pinmux_i2c1_pins { + pinctrl-single,pins = < + AM33XX_IOPAD(0x980, PIN_INPUT_PULLUP | MUX_MODE3) /* uart1_rxd.i2c1_sda */ + AM33XX_IOPAD(0x984, PIN_INPUT_PULLUP | MUX_MODE3) /* uart1_txdi2c1_scl */ + >; + }; + + i2c2_pins: pinmux_i2c2_pins { + pinctrl-single,pins = < + AM33XX_IOPAD(0x978, PIN_INPUT_PULLUP | MUX_MODE3) /* uart1_ctsn.i2c2_sda */ + AM33XX_IOPAD(0x97c, PIN_INPUT_PULLUP | MUX_MODE3) /* uart1_rtsn.i2c2_scl */ + >; + }; + + cpsw_default: cpsw_default { + pinctrl-single,pins = < + /* Slave 1 */ + AM33XX_IOPAD(0x910, PIN_INPUT_PULLUP | MUX_MODE0) /* mii1_rxerr.mii1_rxerr */ + AM33XX_IOPAD(0x914, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mii1_txen.mii1_txen */ + AM33XX_IOPAD(0x918, PIN_INPUT_PULLUP | MUX_MODE0) /* mii1_rxdv.mii1_rxdv */ + AM33XX_IOPAD(0x91c, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mii1_txd3.mii1_txd3 */ + AM33XX_IOPAD(0x920, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mii1_txd2.mii1_txd2 */ + AM33XX_IOPAD(0x924, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mii1_txd1.mii1_txd1 */ + AM33XX_IOPAD(0x928, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mii1_txd0.mii1_txd0 */ + AM33XX_IOPAD(0x92c, PIN_INPUT_PULLUP | MUX_MODE0) /* mii1_txclk.mii1_txclk */ + AM33XX_IOPAD(0x930, PIN_INPUT_PULLUP | MUX_MODE0) /* mii1_rxclk.mii1_rxclk */ + AM33XX_IOPAD(0x934, PIN_INPUT_PULLUP | MUX_MODE0) /* mii1_rxd3.mii1_rxd3 */ + AM33XX_IOPAD(0x938, PIN_INPUT_PULLUP | MUX_MODE0) /* mii1_rxd2.mii1_rxd2 */ + AM33XX_IOPAD(0x93c, PIN_INPUT_PULLUP | MUX_MODE0) /* mii1_rxd1.mii1_rxd1 */ + AM33XX_IOPAD(0x940, PIN_INPUT_PULLUP | MUX_MODE0) /* mii1_rxd0.mii1_rxd0 */ + >; + }; + + cpsw_sleep: cpsw_sleep { + pinctrl-single,pins = < + /* Slave 1 reset value */ + AM33XX_IOPAD(0x910, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM33XX_IOPAD(0x914, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM33XX_IOPAD(0x918, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM33XX_IOPAD(0x91c, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM33XX_IOPAD(0x920, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM33XX_IOPAD(0x924, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM33XX_IOPAD(0x928, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM33XX_IOPAD(0x92c, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM33XX_IOPAD(0x930, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM33XX_IOPAD(0x934, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM33XX_IOPAD(0x938, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM33XX_IOPAD(0x93c, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM33XX_IOPAD(0x940, PIN_INPUT_PULLDOWN | MUX_MODE7) + >; + }; + + davinci_mdio_default: davinci_mdio_default { + pinctrl-single,pins = < + /* MDIO */ + AM33XX_IOPAD(0x948, PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0) /* mdio_data.mdio_data */ + AM33XX_IOPAD(0x94c, PIN_OUTPUT_PULLUP | MUX_MODE0) /* mdio_clk.mdio_clk */ + >; + }; + + davinci_mdio_sleep: davinci_mdio_sleep { + pinctrl-single,pins = < + /* MDIO reset value */ + AM33XX_IOPAD(0x948, PIN_INPUT_PULLDOWN | MUX_MODE7) + AM33XX_IOPAD(0x94c, PIN_INPUT_PULLDOWN | MUX_MODE7) + >; + }; + + mmc1_pins: pinmux_mmc1_pins { + pinctrl-single,pins = < + AM33XX_IOPAD(0x960, PIN_INPUT | MUX_MODE7) /* spi0_cs1.gpio0_6 */ + >; + }; + + emmc_pwrseq_pins: pinmux_emmc_pwrseq_pins { + pinctrl-single,pins = < + AM33XX_IOPAD(0x850, PIN_OUTPUT_PULLUP | MUX_MODE7) /* gpmc_a4.gpio1_20 */ + >; + }; + + emmc_pins: pinmux_emmc_pins { + pinctrl-single,pins = < + AM33XX_IOPAD(0x880, PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_csn1.mmc1_clk */ + AM33XX_IOPAD(0x884, PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_csn2.mmc1_cmd */ + AM33XX_IOPAD(0x800, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad0.mmc1_dat0 */ + AM33XX_IOPAD(0x804, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad1.mmc1_dat1 */ + AM33XX_IOPAD(0x808, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad2.mmc1_dat2 */ + AM33XX_IOPAD(0x80c, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad3.mmc1_dat3 */ + AM33XX_IOPAD(0x810, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad4.mmc1_dat4 */ + AM33XX_IOPAD(0x814, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad5.mmc1_dat5 */ + AM33XX_IOPAD(0x818, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad6.mmc1_dat6 */ + AM33XX_IOPAD(0x81c, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad7.mmc1_dat7 */ + >; + }; + + audio_pins: pinmux_audio_pins { + pinctrl-single,pins = < + AM33XX_IOPAD(0x9ac, PIN_INPUT_PULLDOWN | MUX_MODE0) /* mcasp0_ahcklx.mcasp0_ahclkx */ + AM33XX_IOPAD(0x994, PIN_INPUT_PULLDOWN | MUX_MODE0) /* mcasp0_fsx.mcasp0_fsx */ + AM33XX_IOPAD(0x990, PIN_INPUT_PULLDOWN | MUX_MODE0) /* mcasp0_aclkx.mcasp0_aclkx */ + AM33XX_IOPAD(0x998, PIN_INPUT_PULLDOWN | MUX_MODE0) /* mcasp0_axr0.mcasp0_axr0 */ + AM33XX_IOPAD(0x99c, PIN_INPUT_PULLDOWN | MUX_MODE2) /* mcasp0_ahclkr.mcasp0_axr2*/ + >; + }; + + ehrpwm1_pins: pinmux_ehrpwm1a_pins { + pinctrl-single,pins = < + AM33XX_IOPAD(0x848, PIN_OUTPUT | MUX_MODE6) /* gpmc_a2.ehrpwm1a */ + AM33XX_IOPAD(0x84c, PIN_OUTPUT | MUX_MODE6) /* gpmc_a3.ehrpwm1b */ + >; + }; + + lwb_pins: pinmux_lwb_pins { + pinctrl-single,pins = < + AM33XX_IOPAD(0x9a4, PIN_OUTPUT | MUX_MODE7) /* SoundPA_en - mcasp0_fsr.gpio3_19 */ + AM33XX_IOPAD(0x828, PIN_OUTPUT | MUX_MODE7) /* nKbdOnC - gpmc_ad10.gpio0_26 */ + AM33XX_IOPAD(0x830, PIN_INPUT_PULLUP | MUX_MODE7) /* nKbdInt - gpmc_ad12.gpio1_12 */ + AM33XX_IOPAD(0x834, PIN_INPUT_PULLUP | MUX_MODE7) /* nKbdReset - gpmc_ad13.gpio1_13 */ + AM33XX_IOPAD(0x838, PIN_INPUT_PULLUP | MUX_MODE7) /* nDispReset - gpmc_ad14.gpio1_14 */ + AM33XX_IOPAD(0x844, PIN_INPUT_PULLUP | MUX_MODE7) /* USB1_enPower - gpmc_a1.gpio1_17 */ + /* AVR Programming - SPI Bus (bit bang) - Screen and Keyboard */ + AM33XX_IOPAD(0x954, PIN_INPUT_PULLUP | MUX_MODE7) /* Kbd/Disp/BattMOSI spi0_d0.gpio0_3 */ + AM33XX_IOPAD(0x958, PIN_INPUT_PULLUP | MUX_MODE7) /* Kbd/Disp/BattMISO spi0_d1.gpio0_4 */ + AM33XX_IOPAD(0x950, PIN_INPUT_PULLUP | MUX_MODE7) /* Kbd/Disp/BattSCLK spi0_clk.gpio0_2 */ + /* PDI Bus - Battery system */ + AM33XX_IOPAD(0x840, PIN_INPUT_PULLUP | MUX_MODE7) /* nBattReset gpmc_a0.gpio1_16 */ + AM33XX_IOPAD(0x83c, PIN_INPUT_PULLUP | MUX_MODE7) /* BattPDIData gpmc_ad15.gpio1_15 */ + >; + }; +}; + +&i2c0 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins>; + + clock-frequency = <400000>; + + tps: tps@24 { + reg = <0x24>; + }; + + eeprom: eeprom@50 { + compatible = "at,24c256"; + reg = <0x50>; + }; +}; + +&i2c1 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_pins>; +}; + +&i2c2 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&i2c2_pins>; + + clock-frequency = <400000>; + + audio_codec: tlv320aic3106@1b { + status = "okay"; + compatible = "ti,tlv320aic3106"; + reg = <0x1b>; + + AVDD-supply = <&ldo4_reg>; + IOVDD-supply = <&ldo4_reg>; + DRVDD-supply = <&ldo4_reg>; + DVDD-supply = <&ldo3_reg>; + }; +}; + +&usb { + status = "okay"; +}; + +&usb_ctrl_mod { + status = "okay"; +}; + +&usb0_phy { + status = "okay"; +}; + +&usb1_phy { + status = "okay"; +}; + +&usb0 { + status = "okay"; + dr_mode = "peripheral"; +}; + +&usb1 { + status = "okay"; + dr_mode = "host"; +}; + +&cppi41dma { + status = "okay"; +}; + +&mmc1 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&mmc1_pins>; + bus-width = <4>; + cd-gpios = <&gpio0 6 GPIO_ACTIVE_LOW>; + vmmc-supply = <&vmmcsd_fixed>; +}; + +&mmc2 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&emmc_pins>; + bus-width = <8>; + vmmc-supply = <&vmmcsd_fixed>; + mmc-pwrseq = <&emmc_pwrseq>; +}; + +&mcasp0 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&audio_pins>; + + op-mode = <0>; /* MCASP_ISS_MODE */ + tdm-slots = <2>; + serial-dir = < + 2 0 1 0 + 0 0 0 0 + 0 0 0 0 + 0 0 0 0 + >; + tx-num-evt = <1>; + rx-num-evt = <1>; +}; + +&uart0 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pins>; +}; + +&uart4 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&uart4_pins>; +}; + +#include "tps65217.dtsi" + +&tps { + ti,pmic-shutdown-controller; + + interrupt-parent = <&intc>; + interrupts = <7>; /* NNMI */ + + regulators { + dcdc1_reg: regulator@0 { + /* VDDS_DDR */ + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <1500000>; + regulator-always-on; + }; + + dcdc2_reg: regulator@1 { + /* VDD_MPU voltage limits 0.95V - 1.26V with +/-4% tolerance */ + regulator-name = "vdd_mpu"; + regulator-min-microvolt = <925000>; + regulator-max-microvolt = <1325000>; + regulator-boot-on; + regulator-always-on; + }; + + dcdc3_reg: regulator@2 { + /* VDD_CORE voltage limits 0.95V - 1.1V with +/-4% tolerance */ + regulator-name = "vdd_core"; + regulator-min-microvolt = <925000>; + regulator-max-microvolt = <1150000>; + regulator-boot-on; + regulator-always-on; + }; + + ldo1_reg: regulator@3 { + /* VRTC / VIO / VDDS*/ + regulator-always-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + ldo2_reg: regulator@4 { + /* VDD_3V3AUX */ + regulator-always-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + ldo3_reg: regulator@5 { + /* VDD_1V8 */ + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + ldo4_reg: regulator@6 { + /* VDD_3V3A */ + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + }; +}; + +&cpsw_emac0 { + phy_id = <&davinci_mdio>, <0>; + phy-mode = "mii"; +}; + +&cpsw_emac1 { + phy_id = <&davinci_mdio>, <1>; + phy-mode = "mii"; +}; + +&mac { + status = "okay"; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&cpsw_default>; + pinctrl-1 = <&cpsw_sleep>; +}; + +&davinci_mdio { + status = "okay"; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&davinci_mdio_default>; + pinctrl-1 = <&davinci_mdio_sleep>; +}; + +&sham { + status = "okay"; +}; + +&aes { + status = "okay"; +}; + +&epwmss1 { + status = "okay"; +}; + +&ehrpwm1 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&ehrpwm1_pins>; +}; diff --git a/arch/arm/boot/dts/am3517.dtsi b/arch/arm/boot/dts/am3517.dtsi index f164dce08..5e3f5e86f 100644 --- a/arch/arm/boot/dts/am3517.dtsi +++ b/arch/arm/boot/dts/am3517.dtsi @@ -60,6 +60,17 @@ dma-names = "tx", "rx"; clock-frequency = <48000000>; }; + + omap3_pmx_core2: pinmux@480025d8 { + compatible = "ti,omap3-padconf", "pinctrl-single"; + reg = <0x480025d8 0x24>; + #address-cells = <1>; + #size-cells = <0>; + #interrupt-cells = <1>; + interrupt-controller; + pinctrl-single,register-width = <16>; + pinctrl-single,function-mask = <0xff1f>; + }; }; }; diff --git a/arch/arm/boot/dts/am4372.dtsi b/arch/arm/boot/dts/am4372.dtsi index c80a3e233..ade28c790 100644 --- a/arch/arm/boot/dts/am4372.dtsi +++ b/arch/arm/boot/dts/am4372.dtsi @@ -132,6 +132,12 @@ }; }; + emif: emif@4c000000 { + compatible = "ti,emif-am4372"; + reg = <0x4c000000 0x1000000>; + ti,hwmods = "emif"; + }; + edma: edma@49000000 { compatible = "ti,edma3"; ti,hwmods = "tpcc", "tptc0", "tptc1", "tptc2"; @@ -941,6 +947,7 @@ ti,hwmods = "dss_rfbi"; clocks = <&disp_clk>; clock-names = "fck"; + status = "disabled"; }; }; diff --git a/arch/arm/boot/dts/am437x-gp-evm.dts b/arch/arm/boot/dts/am437x-gp-evm.dts index 26956cb50..84aa30c32 100644 --- a/arch/arm/boot/dts/am437x-gp-evm.dts +++ b/arch/arm/boot/dts/am437x-gp-evm.dts @@ -21,6 +21,7 @@ aliases { display0 = &lcd0; + serial3 = &uart3; }; vmmcsd_fixed: fixedregulator-sd { @@ -42,6 +43,15 @@ gpio = <&gpio5 7 GPIO_ACTIVE_HIGH>; }; + vmmcwl_fixed: fixedregulator-mmcwl { + compatible = "regulator-fixed"; + regulator-name = "vmmcwl_fixed"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + gpio = <&gpio1 20 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + backlight { compatible = "pwm-backlight"; pwms = <&ecap0 0 50000 PWM_POLARITY_INVERTED>; @@ -106,9 +116,21 @@ }; }; }; + + /* fixed 12MHz oscillator */ + refclk: oscillator { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <12000000>; + }; + }; &am43xx_pinmux { + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&wlan_pins_default>; + pinctrl-1 = <&wlan_pins_sleep>; + i2c0_pins: i2c0_pins { pinctrl-single,pins = < 0x188 (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0) /* i2c0_sda.i2c0_sda */ @@ -340,6 +362,53 @@ 0x204 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam1_data7 mode 0*/ >; }; + + mmc3_pins_default: pinmux_mmc3_pins_default { + pinctrl-single,pins = < + 0x8c (PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_clk.mmc2_clk */ + 0x88 (PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_csn3.mmc2_cmd */ + 0x44 (PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_a1.mmc2_dat0 */ + 0x48 (PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_a2.mmc2_dat1 */ + 0x4c (PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_a3.mmc2_dat2 */ + 0x78 (PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_be1n.mmc2_dat3 */ + >; + }; + + mmc3_pins_sleep: pinmux_mmc3_pins_sleep { + pinctrl-single,pins = < + 0x8c (PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_clk.mmc2_clk */ + 0x88 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_csn3.mmc2_cmd */ + 0x44 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_a1.mmc2_dat0 */ + 0x48 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_a2.mmc2_dat1 */ + 0x4c (PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_a3.mmc2_dat2 */ + 0x78 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_be1n.mmc2_dat3 */ + >; + }; + + wlan_pins_default: pinmux_wlan_pins_default { + pinctrl-single,pins = < + 0x50 (PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpmc_a4.gpio1_20 WL_EN */ + 0x5c (PIN_INPUT | WAKEUP_ENABLE | MUX_MODE7) /* gpmc_a7.gpio1_23 WL_IRQ*/ + 0x40 (PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpmc_a0.gpio1_16 BT_EN*/ + >; + }; + + wlan_pins_sleep: pinmux_wlan_pins_sleep { + pinctrl-single,pins = < + 0x50 (PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpmc_a4.gpio1_20 WL_EN */ + 0x5c (PIN_INPUT | WAKEUP_ENABLE | MUX_MODE7) /* gpmc_a7.gpio1_23 WL_IRQ*/ + 0x40 (PIN_OUTPUT_PULLUP | MUX_MODE7) /* gpmc_a0.gpio1_16 BT_EN*/ + >; + }; + + uart3_pins: uart3_pins { + pinctrl-single,pins = < + 0x228 (PIN_INPUT | MUX_MODE0) /* uart3_rxd.uart3_rxd */ + 0x22c (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* uart3_txd.uart3_txd */ + 0x230 (PIN_INPUT_PULLUP | MUX_MODE0) /* uart3_ctsn.uart3_ctsn */ + 0x234 (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* uart3_rtsn.uart3_rtsn */ + >; + }; }; &i2c0 { @@ -403,6 +472,21 @@ regulator-always-on; }; }; + + ov2659@30 { + compatible = "ovti,ov2659"; + reg = <0x30>; + + clocks = <&refclk 0>; + clock-names = "xvclk"; + + port { + ov2659_0: endpoint { + remote-endpoint = <&vpfe1_ep>; + link-frequencies = /bits/ 64 <70000000>; + }; + }; + }; }; &i2c1 { @@ -422,6 +506,21 @@ touchscreen-size-x = <1024>; touchscreen-size-y = <600>; }; + + ov2659@30 { + compatible = "ovti,ov2659"; + reg = <0x30>; + + clocks = <&refclk 0>; + clock-names = "xvclk"; + + port { + ov2659_1: endpoint { + remote-endpoint = <&vpfe0_ep>; + link-frequencies = /bits/ 64 <70000000>; + }; + }; + }; }; &epwmss0 { @@ -446,6 +545,10 @@ status = "okay"; }; +&gpio1 { + status = "okay"; +}; + &gpio3 { status = "okay"; }; @@ -468,6 +571,43 @@ cd-gpios = <&gpio0 6 GPIO_ACTIVE_HIGH>; }; +&mmc3 { + status = "okay"; + /* these are on the crossbar and are outlined in the + xbar-event-map element */ + dmas = <&edma 30 + &edma 31>; + dma-names = "tx", "rx"; + vmmc-supply = <&vmmcwl_fixed>; + bus-width = <4>; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&mmc3_pins_default>; + pinctrl-1 = <&mmc3_pins_sleep>; + cap-power-off-card; + keep-power-in-suspend; + ti,non-removable; + + #address-cells = <1>; + #size-cells = <0>; + wlcore: wlcore@0 { + compatible = "ti,wl1835"; + reg = <2>; + interrupt-parent = <&gpio1>; + interrupts = <23 IRQ_TYPE_LEVEL_HIGH>; + }; +}; + +&edma { + ti,edma-xbar-event-map = /bits/ 16 <1 30 + 2 31>; +}; + +&uart3 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&uart3_pins>; +}; + &usb2_phy1 { status = "okay"; }; @@ -625,7 +765,7 @@ port { vpfe0_ep: endpoint { - /* remote-endpoint = <&sensor>; add once we have it */ + remote-endpoint = <&ov2659_1>; ti,am437x-vpfe-interface = <0>; bus-width = <8>; hsync-active = <0>; @@ -642,7 +782,7 @@ port { vpfe1_ep: endpoint { - /* remote-endpoint = <&sensor>; add once we have it */ + remote-endpoint = <&ov2659_0>; ti,am437x-vpfe-interface = <0>; bus-width = <8>; hsync-active = <0>; diff --git a/arch/arm/boot/dts/am57xx-beagle-x15.dts b/arch/arm/boot/dts/am57xx-beagle-x15.dts index c9df40e5c..a63bf7819 100644 --- a/arch/arm/boot/dts/am57xx-beagle-x15.dts +++ b/arch/arm/boot/dts/am57xx-beagle-x15.dts @@ -19,6 +19,7 @@ rtc0 = &mcp_rtc; rtc1 = &tps659038_rtc; rtc2 = &rtc; + display0 = &hdmi0; }; memory { @@ -103,6 +104,51 @@ pinctrl-names = "default"; pinctrl-0 = <&extcon_usb2_pins>; }; + + hdmi0: connector { + compatible = "hdmi-connector"; + label = "hdmi"; + + type = "a"; + + port { + hdmi_connector_in: endpoint { + remote-endpoint = <&tpd12s015_out>; + }; + }; + }; + + tpd12s015: encoder { + compatible = "ti,tpd12s015"; + + pinctrl-names = "default"; + pinctrl-0 = <&tpd12s015_pins>; + + gpios = <&gpio7 10 GPIO_ACTIVE_HIGH>, /* gpio7_10, CT CP HPD */ + <&gpio6 28 GPIO_ACTIVE_HIGH>, /* gpio6_28, LS OE */ + <&gpio7 12 GPIO_ACTIVE_HIGH>; /* gpio7_12/sp1_cs2, HPD */ + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + tpd12s015_in: endpoint { + remote-endpoint = <&hdmi_out>; + }; + }; + + port@1 { + reg = <1>; + + tpd12s015_out: endpoint { + remote-endpoint = <&hdmi_connector_in>; + }; + }; + }; + }; }; &dra7_pmx_core { @@ -122,6 +168,13 @@ >; }; + hdmi_pins: pinmux_hdmi_pins { + pinctrl-single,pins = < + 0x408 (PIN_INPUT | MUX_MODE1) /* i2c2_sda.hdmi1_ddc_scl */ + 0x40c (PIN_INPUT | MUX_MODE1) /* i2c2_scl.hdmi1_ddc_sda */ + >; + }; + i2c3_pins_default: i2c3_pins_default { pinctrl-single,pins = < 0x2a4 (PIN_INPUT| MUX_MODE10) /* mcasp1_aclkx.i2c3_sda */ @@ -278,6 +331,14 @@ 0x3e8 (PIN_INPUT_PULLUP | MUX_MODE14) /* uart1_ctsn.gpio7_24 */ >; }; + + tpd12s015_pins: pinmux_tpd12s015_pins { + pinctrl-single,pins = < + 0x3b0 (PIN_OUTPUT | MUX_MODE14) /* gpio7_10 CT_CP_HPD */ + 0x3b8 (PIN_INPUT_PULLDOWN | MUX_MODE14) /* gpio7_12 HPD */ + 0x370 (PIN_OUTPUT | MUX_MODE14) /* gpio6_28 LS_OE */ + >; + }; }; &i2c1 { @@ -612,3 +673,23 @@ }; }; }; + +&dss { + status = "ok"; + + vdda_video-supply = <&ldoln_reg>; +}; + +&hdmi { + status = "ok"; + vdda-supply = <&ldo3_reg>; + + pinctrl-names = "default"; + pinctrl-0 = <&hdmi_pins>; + + port { + hdmi_out: endpoint { + remote-endpoint = <&tpd12s015_in>; + }; + }; +}; diff --git a/arch/arm/boot/dts/arm-realview-pb1176.dts b/arch/arm/boot/dts/arm-realview-pb1176.dts index ff26c7ed8..1bc64cda8 100644 --- a/arch/arm/boot/dts/arm-realview-pb1176.dts +++ b/arch/arm/boot/dts/arm-realview-pb1176.dts @@ -114,7 +114,7 @@ ranges; syscon: syscon@10000000 { - compatible = "arm,realview-pb1176-syscon", "syscon"; + compatible = "arm,realview-pb1176-syscon", "syscon", "simple-mfd"; reg = <0x10000000 0x1000>; led@08.0 { diff --git a/arch/arm/boot/dts/armada-370-db.dts b/arch/arm/boot/dts/armada-370-db.dts index 19f3bf271..03542f7b5 100644 --- a/arch/arm/boot/dts/armada-370-db.dts +++ b/arch/arm/boot/dts/armada-370-db.dts @@ -162,7 +162,7 @@ spi-flash@0 { #address-cells = <1>; #size-cells = <1>; - compatible = "mx25l25635e"; + compatible = "mx25l25635e", "jedec,spi-nor"; reg = <0>; /* Chip select 0 */ spi-max-frequency = <50000000>; }; diff --git a/arch/arm/boot/dts/armada-370-dlink-dns327l.dts b/arch/arm/boot/dts/armada-370-dlink-dns327l.dts new file mode 100644 index 000000000..af4dc548c --- /dev/null +++ b/arch/arm/boot/dts/armada-370-dlink-dns327l.dts @@ -0,0 +1,357 @@ +/* + * Device Tree file for D-Link DNS-327L + * + * Copyright (C) 2015, Andrew Andrianov <andrew@ncrmnt.org> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/* Remaining unsolved: + * There's still some unknown device on i2c address 0x13 + */ + +/dts-v1/; + +#include <dt-bindings/input/input.h> +#include <dt-bindings/gpio/gpio.h> +#include "armada-370.dtsi" + +/ { + model = "D-Link DNS-327L"; + compatible = "dlink,dns327l", + "marvell,armada370", + "marvell,armada-370-xp"; + + chosen { + stdout-path = &uart0; + }; + + memory { + device_type = "memory"; + reg = <0x00000000 0x20000000>; /* 512 MiB */ + }; + + soc { + ranges = <MBUS_ID(0xf0, 0x01) 0 0xd0000000 0x100000 + MBUS_ID(0x01, 0xe0) 0 0xfff00000 0x100000>; + + pcie-controller { + status = "okay"; + + pcie@1,0 { + /* Port 0, Lane 0 */ + status = "okay"; + }; + + pcie@2,0 { + /* Port 1, Lane 0 */ + status = "okay"; + }; + }; + + internal-regs { + sata@a0000 { + nr-ports = <2>; + status = "okay"; + }; + + usb@50000 { + status = "okay"; + }; + + nand@d0000 { + status = "okay"; + num-cs = <1>; + marvell,nand-keep-config; + marvell,nand-enable-arbiter; + nand-on-flash-bbt; + nand-ecc-strength = <4>; + nand-ecc-step-size = <512>; + + partition@0 { + label = "u-boot"; + /* 1.0 MiB */ + reg = <0x0000000 0x100000>; + read-only; + }; + + partition@100000 { + label = "u-boot-env"; + /* 128 KiB */ + reg = <0x100000 0x20000>; + read-only; + }; + + partition@120000 { + label = "uImage"; + /* 7 MiB */ + reg = <0x120000 0x700000>; + }; + + partition@820000 { + label = "ubifs"; + /* ~ 84 MiB */ + reg = <0x820000 0x54e0000>; + }; + + /* Hardcoded into stock bootloader */ + partition@5d00000 { + label = "failsafe-uImage"; + /* 5 MiB */ + reg = <0x5d00000 0x500000>; + }; + + partition@6200000 { + label = "failsafe-fs"; + /* 29 MiB */ + reg = <0x6200000 0x1d00000>; + }; + + partition@7f00000 { + label = "bbt"; + /* 1 MiB for BBT */ + reg = <0x7f00000 0x100000>; + }; + }; + }; + }; + + gpio-keys { + compatible = "gpio-keys"; + pinctrl-0 = < + &backup_button_pin + &power_button_pin + &reset_button_pin>; + pinctrl-names = "default"; + + power-button { + label = "Power Button"; + linux,code = <KEY_POWER>; + gpios = <&gpio2 1 GPIO_ACTIVE_LOW>; + }; + + backup-button { + label = "Backup Button"; + linux,code = <KEY_COPY>; + gpios = <&gpio1 31 GPIO_ACTIVE_LOW>; + }; + + reset-button { + label = "Reset Button"; + linux,code = <KEY_RESTART>; + gpios = <&gpio2 0 GPIO_ACTIVE_LOW>; + }; + }; + + gpio-leds { + compatible = "gpio-leds"; + pinctrl-0 = < + &sata_l_amber_pin + &sata_r_amber_pin + &backup_led_pin + /* Ensure these are managed by hardware */ + &sata_l_white_pin + &sata_r_white_pin>; + + pinctrl-names = "default"; + + sata-r-amber-pin { + label = "dns327l:amber:sata-r"; + gpios = <&gpio1 20 GPIO_ACTIVE_HIGH>; + default-state = "keep"; + }; + + sata-l-amber-pin { + label = "dns327l:amber:sata-l"; + gpios = <&gpio1 21 GPIO_ACTIVE_HIGH>; + default-state = "keep"; + }; + + backup-led-pin { + label = "dns327l:white:usb"; + gpios = <&gpio1 29 GPIO_ACTIVE_HIGH>; + default-state = "keep"; + }; + }; + + regulators { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <0>; + + usb_power: regulator@1 { + compatible = "regulator-fixed"; + reg = <1>; + pinctrl-0 = <&xhci_pwr_pin>; + pinctrl-names = "default"; + regulator-name = "USB3.0 Port Power"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + enable-active-high; + regulator-boot-on; + regulator-always-on; + gpio = <&gpio0 13 GPIO_ACTIVE_HIGH>; + }; + + sata_r_power: regulator@2 { + compatible = "regulator-fixed"; + reg = <2>; + pinctrl-0 = <&sata_r_pwr_pin>; + pinctrl-names = "default"; + regulator-name = "SATA-R Power"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + startup-delay-us = <2000000>; + enable-active-high; + regulator-always-on; + regulator-boot-on; + gpio = <&gpio1 22 GPIO_ACTIVE_HIGH>; + }; + + sata_l_power: regulator@3 { + compatible = "regulator-fixed"; + reg = <3>; + pinctrl-0 = <&sata_l_pwr_pin>; + pinctrl-names = "default"; + regulator-name = "SATA-L Power"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + startup-delay-us = <4000000>; + enable-active-high; + regulator-always-on; + regulator-boot-on; + gpio = <&gpio1 24 GPIO_ACTIVE_HIGH>; + }; + }; +}; + +&pinctrl { + sata_l_white_pin: sata-l-white-pin { + marvell,pins = "mpp57"; + marvell,function = "sata0"; + }; + + sata_r_white_pin: sata-r-white-pin { + marvell,pins = "mpp55"; + marvell,function = "sata1"; + }; + + sata_r_amber_pin: sata-r-amber-pin { + marvell,pins = "mpp52"; + marvell,function = "gpio"; + }; + + sata_l_amber_pin: sata-l-amber-pin { + marvell,pins = "mpp53"; + marvell,function = "gpio"; + }; + + backup_led_pin: backup-led-pin { + marvell,pins = "mpp61"; + marvell,function = "gpo"; + }; + + xhci_pwr_pin: xhci-pwr-pin { + marvell,pins = "mpp13"; + marvell,function = "gpio"; + }; + + sata_r_pwr_pin: sata-r-pwr-pin { + marvell,pins = "mpp54"; + marvell,function = "gpio"; + }; + + sata_l_pwr_pin: sata-l-pwr-pin { + marvell,pins = "mpp56"; + marvell,function = "gpio"; + }; + + uart1_pins: uart1-pins { + marvell,pins = "mpp60", "mpp61"; + marvell,function = "uart1"; + }; + + power_button_pin: power-button-pin { + marvell,pins = "mpp65"; + marvell,function = "gpio"; + }; + + backup_button_pin: backup-button-pin { + marvell,pins = "mpp63"; + marvell,function = "gpio"; + }; + + reset_button_pin: reset-button-pin { + marvell,pins = "mpp64"; + marvell,function = "gpio"; + }; +}; + +/* Serial console */ +&uart0 { + status = "okay"; +}; + +/* Connected to Weltrend MCU */ +&uart1 { + pinctrl-0 = <&uart1_pins>; + pinctrl-names = "default"; + status = "okay"; +}; + +&mdio { + phy0: ethernet-phy@0 { /* Marvell 88E1318 */ + reg = <0>; + marvell,reg-init = <0x0 0x16 0x0 0x0002>, + <0x0 0x19 0x0 0x0077>, + <0x0 0x18 0x0 0x5747>; + }; +}; + +ð1 { + phy = <&phy0>; + phy-mode = "rgmii-id"; + status = "okay"; +}; + +&i2c0 { + compatible = "marvell,mv64xxx-i2c"; + clock-frequency = <100000>; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/armada-370-synology-ds213j.dts b/arch/arm/boot/dts/armada-370-synology-ds213j.dts index b42b76776..4f4924362 100644 --- a/arch/arm/boot/dts/armada-370-synology-ds213j.dts +++ b/arch/arm/boot/dts/armada-370-synology-ds213j.dts @@ -92,7 +92,7 @@ spi-flash@0 { #address-cells = <1>; #size-cells = <1>; - compatible = "micron,n25q064"; + compatible = "micron,n25q064", "jedec,spi-nor"; reg = <0>; /* Chip select 0 */ spi-max-frequency = <20000000>; diff --git a/arch/arm/boot/dts/armada-370-xp.dtsi b/arch/arm/boot/dts/armada-370-xp.dtsi index 06a2f2ae9..a718866ba 100644 --- a/arch/arm/boot/dts/armada-370-xp.dtsi +++ b/arch/arm/boot/dts/armada-370-xp.dtsi @@ -149,7 +149,6 @@ }; spi0: spi@10600 { - compatible = "marvell,armada-370-spi", "marvell,orion-spi"; reg = <0x10600 0x28>; #address-cells = <1>; #size-cells = <0>; @@ -160,7 +159,6 @@ }; spi1: spi@10680 { - compatible = "marvell,armada-370-spi", "marvell,orion-spi"; reg = <0x10680 0x28>; #address-cells = <1>; #size-cells = <0>; diff --git a/arch/arm/boot/dts/armada-370.dtsi b/arch/arm/boot/dts/armada-370.dtsi index ca4257b2f..53a1a5abe 100644 --- a/arch/arm/boot/dts/armada-370.dtsi +++ b/arch/arm/boot/dts/armada-370.dtsi @@ -139,11 +139,15 @@ * board level if a different configuration is used. */ spi0: spi@10600 { + compatible = "marvell,armada-370-spi", + "marvell,orion-spi"; pinctrl-0 = <&spi0_pins1>; pinctrl-names = "default"; }; spi1: spi@10680 { + compatible = "marvell,armada-370-spi", + "marvell,orion-spi"; pinctrl-0 = <&spi1_pins>; pinctrl-names = "default"; }; diff --git a/arch/arm/boot/dts/armada-375-db.dts b/arch/arm/boot/dts/armada-375-db.dts index 4eabc9c21..5711b97e8 100644 --- a/arch/arm/boot/dts/armada-375-db.dts +++ b/arch/arm/boot/dts/armada-375-db.dts @@ -81,7 +81,7 @@ spi-flash@0 { #address-cells = <1>; #size-cells = <1>; - compatible = "n25q128a13"; + compatible = "n25q128a13", "jedec,spi-nor"; reg = <0>; /* Chip select 0 */ spi-max-frequency = <108000000>; }; diff --git a/arch/arm/boot/dts/armada-375.dtsi b/arch/arm/boot/dts/armada-375.dtsi index f076ff856..67a0ab0f7 100644 --- a/arch/arm/boot/dts/armada-375.dtsi +++ b/arch/arm/boot/dts/armada-375.dtsi @@ -238,7 +238,8 @@ }; spi0: spi@10600 { - compatible = "marvell,orion-spi"; + compatible = "marvell,armada-375-spi", + "marvell,orion-spi"; reg = <0x10600 0x50>; #address-cells = <1>; #size-cells = <0>; @@ -249,7 +250,8 @@ }; spi1: spi@10680 { - compatible = "marvell,orion-spi"; + compatible = "marvell,armada-375-spi", + "marvell,orion-spi"; reg = <0x10680 0x50>; #address-cells = <1>; #size-cells = <0>; diff --git a/arch/arm/boot/dts/armada-385-db-ap.dts b/arch/arm/boot/dts/armada-385-db-ap.dts index 7219ac3a3..89f5a9595 100644 --- a/arch/arm/boot/dts/armada-385-db-ap.dts +++ b/arch/arm/boot/dts/armada-385-db-ap.dts @@ -70,7 +70,7 @@ spi-flash@0 { #address-cells = <1>; #size-cells = <1>; - compatible = "st,m25p128"; + compatible = "st,m25p128", "jedec,spi-nor"; reg = <0>; /* Chip select 0 */ spi-max-frequency = <54000000>; }; diff --git a/arch/arm/boot/dts/armada-385-linksys-caiman.dts b/arch/arm/boot/dts/armada-385-linksys-caiman.dts new file mode 100644 index 000000000..f3cee918d --- /dev/null +++ b/arch/arm/boot/dts/armada-385-linksys-caiman.dts @@ -0,0 +1,114 @@ +/* + * Device Tree include for the Linksys WRT1200AC (Caiman) + * + * Copyright (C) 2015 Imre Kaloz <kaloz@openwrt.org> + * + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without + * any warranty of any kind, whether express or implied. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; +#include "armada-385-linksys.dtsi" + +/ { + model = "Linksys WRT1200AC"; + compatible = "linksys,caiman", "linksys,armada385", "marvell,armada385", + "marvell,armada380"; + + soc { + internal-regs{ + i2c@11000 { + + pca9635@68 { + #address-cells = <1>; + #size-cells = <0>; + + wan_amber@0 { + label = "caiman:amber:wan"; + reg = <0x0>; + }; + + wan_white@1 { + label = "caiman:white:wan"; + reg = <0x1>; + }; + + wlan_2g@2 { + label = "caiman:white:wlan_2g"; + reg = <0x2>; + }; + + wlan_5g@3 { + label = "caiman:white:wlan_5g"; + reg = <0x3>; + }; + + usb2@5 { + label = "caiman:white:usb2"; + reg = <0x5>; + }; + + usb3_1@6 { + label = "caiman:white:usb3_1"; + reg = <0x6>; + }; + + usb3_2@7 { + label = "caiman:white:usb3_2"; + reg = <0x7>; + }; + + wps_white@8 { + label = "caiman:white:wps"; + reg = <0x8>; + }; + + wps_amber@9 { + label = "caiman:amber:wps"; + reg = <0x9>; + }; + }; + }; + }; + }; + + gpio-leds { + power { + label = "caiman:white:power"; + }; + + sata { + label = "caiman:white:sata"; + }; + }; +}; diff --git a/arch/arm/boot/dts/armada-385-linksys-cobra.dts b/arch/arm/boot/dts/armada-385-linksys-cobra.dts new file mode 100644 index 000000000..111071860 --- /dev/null +++ b/arch/arm/boot/dts/armada-385-linksys-cobra.dts @@ -0,0 +1,114 @@ +/* + * Device Tree file for the Linksys WRT1900ACv2 (Cobra) + * + * Copyright (C) 2015 Imre Kaloz <kaloz@openwrt.org> + * + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without + * any warranty of any kind, whether express or implied. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; +#include "armada-385-linksys.dtsi" + +/ { + model = "Linksys WRT1900ACv2"; + compatible = "linksys,cobra", "linksys,armada385", "marvell,armada385", + "marvell,armada380"; + + soc { + internal-regs{ + i2c@11000 { + + pca9635@68 { + #address-cells = <1>; + #size-cells = <0>; + + wan_amber@0 { + label = "cobra:amber:wan"; + reg = <0x0>; + }; + + wan_white@1 { + label = "cobra:white:wan"; + reg = <0x1>; + }; + + wlan_2g@2 { + label = "cobra:white:wlan_2g"; + reg = <0x2>; + }; + + wlan_5g@3 { + label = "cobra:white:wlan_5g"; + reg = <0x3>; + }; + + usb2@5 { + label = "cobra:white:usb2"; + reg = <0x5>; + }; + + usb3_1@6 { + label = "cobra:white:usb3_1"; + reg = <0x6>; + }; + + usb3_2@7 { + label = "cobra:white:usb3_2"; + reg = <0x7>; + }; + + wps_white@8 { + label = "cobra:white:wps"; + reg = <0x8>; + }; + + wps_amber@9 { + label = "cobra:amber:wps"; + reg = <0x9>; + }; + }; + }; + }; + }; + + gpio-leds { + power { + label = "cobra:white:power"; + }; + + sata { + label = "cobra:white:sata"; + }; + }; +}; diff --git a/arch/arm/boot/dts/armada-385-linksys.dtsi b/arch/arm/boot/dts/armada-385-linksys.dtsi new file mode 100644 index 000000000..74a9c6b54 --- /dev/null +++ b/arch/arm/boot/dts/armada-385-linksys.dtsi @@ -0,0 +1,332 @@ +/* + * Device Tree include file for Armada 385 based Linksys boards + * + * Copyright (C) 2015 Imre Kaloz <kaloz@openwrt.org> + * + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without + * any warranty of any kind, whether express or implied. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> +#include "armada-385.dtsi" + +/ { + model = "Linksys boards based on Armada 385"; + compatible = "linksys,armada385", "marvell,armada385", + "marvell,armada380"; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + memory { + device_type = "memory"; + reg = <0x00000000 0x20000000>; /* 512 MB */ + }; + + soc { + ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000 + MBUS_ID(0x01, 0x1d) 0 0xfff00000 0x100000>; + + internal-regs { + + spi@10600 { + status = "disabled"; + }; + + i2c@11000 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins>; + status = "okay"; + + tmp421@4c { + compatible = "ti,tmp421"; + reg = <0x4c>; + }; + + pca9635@68 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "nxp,pca9635"; + reg = <0x68>; + }; + }; + + /* J10: VCC, NC, RX, NC, TX, GND */ + serial@12000 { + status = "okay"; + }; + + ethernet@70000 { + status = "okay"; + phy-mode = "rgmii-id"; + fixed-link { + speed = <1000>; + full-duplex; + }; + }; + + ethernet@34000 { + status = "okay"; + phy-mode = "sgmii"; + fixed-link { + speed = <1000>; + full-duplex; + }; + }; + + mdio { + status = "okay"; + }; + + sata@a8000 { + status = "okay"; + }; + + /* USB part of the eSATA/USB 2.0 port */ + usb@50000 { + status = "okay"; + }; + + usb3@f8000 { + status = "okay"; + usb-phy = <&usb3_phy>; + }; + + flash@d0000 { + status = "okay"; + num-cs = <1>; + marvell,nand-keep-config; + marvell,nand-enable-arbiter; + nand-on-flash-bbt; + + partition@0 { + label = "u-boot"; + reg = <0x0000000 0x200000>; /* 2MB */ + read-only; + }; + + partition@100000 { + label = "u_env"; + reg = <0x200000 0x40000>; /* 256KB */ + }; + + partition@140000 { + label = "s_env"; + reg = <0x240000 0x40000>; /* 256KB */ + }; + + partition@900000 { + label = "devinfo"; + reg = <0x900000 0x100000>; /* 1MB */ + read-only; + }; + + /* kernel1 overlaps with rootfs1 by design */ + partition@a00000 { + label = "kernel1"; + reg = <0xa00000 0x2800000>; /* 40MB */ + }; + + partition@1000000 { + label = "rootfs1"; + reg = <0x1000000 0x2200000>; /* 34MB */ + }; + + /* kernel2 overlaps with rootfs2 by design */ + partition@3200000 { + label = "kernel2"; + reg = <0x3200000 0x2800000>; /* 40MB */ + }; + + partition@3800000 { + label = "rootfs2"; + reg = <0x3800000 0x2200000>; /* 34MB */ + }; + + /* + * 38MB, last MB is for the BBT, not writable + */ + partition@5a00000 { + label = "syscfg"; + reg = <0x5a00000 0x2600000>; + }; + + /* + * Unused area between "s_env" and "devinfo". + * Moved here because otherwise the renumbered + * partitions would break the bootloader + * supplied bootargs + */ + partition@180000 { + label = "unused_area"; + reg = <0x280000 0x680000>; /* 6.5MB */ + }; + }; + }; + + pcie-controller { + status = "okay"; + + pcie@1,0 { + /* Marvell 88W8864, 5GHz-only */ + status = "okay"; + }; + + pcie@2,0 { + /* Marvell 88W8864, 2GHz-only */ + status = "okay"; + }; + }; + }; + + usb3_phy: usb3_phy { + compatible = "usb-nop-xceiv"; + vcc-supply = <®_xhci0_vbus>; + }; + + reg_xhci0_vbus: xhci0-vbus { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&xhci0_vbus_pins>; + regulator-name = "xhci0-vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + enable-active-high; + gpio = <&gpio1 18 GPIO_ACTIVE_HIGH>; + }; + + gpio_keys { + compatible = "gpio-keys"; + #address-cells = <1>; + #size-cells = <0>; + pinctrl-0 = <&keys_pin>; + pinctrl-names = "default"; + + button@1 { + label = "WPS"; + linux,code = <KEY_WPS_BUTTON>; + gpios = <&gpio0 24 GPIO_ACTIVE_LOW>; + }; + + button@2 { + label = "Factory Reset Button"; + linux,code = <KEY_RESTART>; + gpios = <&gpio1 15 GPIO_ACTIVE_LOW>; + }; + }; + + gpio-leds { + compatible = "gpio-leds"; + pinctrl-0 = <&power_led_pin &sata_led_pin>; + pinctrl-names = "default"; + + power { + gpios = <&gpio1 23 GPIO_ACTIVE_HIGH>; + default-state = "on"; + }; + + sata { + gpios = <&gpio1 22 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + }; + + dsa@0 { + compatible = "marvell,dsa"; + #address-cells = <2>; + #size-cells = <0>; + + dsa,ethernet = <ð2>; + dsa,mii-bus = <&mdio>; + + switch@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x0 0>; /* MDIO address 0, switch 0 in tree */ + + port@0 { + reg = <0>; + label = "lan4"; + }; + + port@1 { + reg = <1>; + label = "lan3"; + }; + + port@2 { + reg = <2>; + label = "lan2"; + }; + + port@3 { + reg = <3>; + label = "lan1"; + }; + + port@4 { + reg = <4>; + label = "wan"; + }; + + port@5 { + reg = <5>; + label = "cpu"; + }; + }; + }; +}; + +&pinctrl { + keys_pin: keys-pin { + marvell,pins = "mpp24", "mpp47"; + marvell,function = "gpio"; + }; + + power_led_pin: power-led-pin { + marvell,pins = "mpp55"; + marvell,function = "gpio"; + }; + + sata_led_pin: sata-led-pin { + marvell,pins = "mpp54"; + marvell,function = "gpio"; + }; + + xhci0_vbus_pins: xhci0-vbus-pins { + marvell,pins = "mpp50"; + marvell,function = "gpio"; + }; +}; diff --git a/arch/arm/boot/dts/armada-388-db.dts b/arch/arm/boot/dts/armada-388-db.dts index 51d1623de..91ac8c118 100644 --- a/arch/arm/boot/dts/armada-388-db.dts +++ b/arch/arm/boot/dts/armada-388-db.dts @@ -73,7 +73,7 @@ spi-flash@0 { #address-cells = <1>; #size-cells = <1>; - compatible = "w25q32"; + compatible = "w25q32", "jedec,spi-nor"; reg = <0>; /* Chip select 0 */ spi-max-frequency = <108000000>; }; diff --git a/arch/arm/boot/dts/armada-388-gp.dts b/arch/arm/boot/dts/armada-388-gp.dts index 78514ab0b..fd4f6fd8a 100644 --- a/arch/arm/boot/dts/armada-388-gp.dts +++ b/arch/arm/boot/dts/armada-388-gp.dts @@ -69,7 +69,7 @@ spi-flash@0 { #address-cells = <1>; #size-cells = <1>; - compatible = "st,m25p128"; + compatible = "st,m25p128", "jedec,spi-nor"; reg = <0>; /* Chip select 0 */ spi-max-frequency = <50000000>; m25p,fast-read; diff --git a/arch/arm/boot/dts/armada-388-rd.dts b/arch/arm/boot/dts/armada-388-rd.dts index 1dc6e2341..b657b1687 100644 --- a/arch/arm/boot/dts/armada-388-rd.dts +++ b/arch/arm/boot/dts/armada-388-rd.dts @@ -74,7 +74,7 @@ spi-flash@0 { #address-cells = <1>; #size-cells = <1>; - compatible = "st,m25p128"; + compatible = "st,m25p128", "jedec,spi-nor"; reg = <0>; /* Chip select 0 */ spi-max-frequency = <108000000>; }; diff --git a/arch/arm/boot/dts/armada-38x.dtsi b/arch/arm/boot/dts/armada-38x.dtsi index 218a2acd3..04ecfe6e2 100644 --- a/arch/arm/boot/dts/armada-38x.dtsi +++ b/arch/arm/boot/dts/armada-38x.dtsi @@ -167,7 +167,8 @@ }; spi0: spi@10600 { - compatible = "marvell,orion-spi"; + compatible = "marvell,armada-380-spi", + "marvell,orion-spi"; reg = <0x10600 0x50>; #address-cells = <1>; #size-cells = <0>; @@ -178,7 +179,8 @@ }; spi1: spi@10680 { - compatible = "marvell,orion-spi"; + compatible = "marvell,armada-380-spi", + "marvell,orion-spi"; reg = <0x10680 0x50>; #address-cells = <1>; #size-cells = <0>; @@ -495,7 +497,7 @@ status = "disabled"; }; - mdio@72004 { + mdio: mdio@72004 { #address-cells = <1>; #size-cells = <0>; compatible = "marvell,orion-mdio"; diff --git a/arch/arm/boot/dts/armada-398-db.dts b/arch/arm/boot/dts/armada-398-db.dts index bbf83756c..788c3badb 100644 --- a/arch/arm/boot/dts/armada-398-db.dts +++ b/arch/arm/boot/dts/armada-398-db.dts @@ -73,7 +73,7 @@ spi-flash@0 { #address-cells = <1>; #size-cells = <0>; - compatible = "n25q128a13"; + compatible = "n25q128a13", "jedec,spi-nor"; reg = <0>; spi-max-frequency = <108000000>; diff --git a/arch/arm/boot/dts/armada-39x.dtsi b/arch/arm/boot/dts/armada-39x.dtsi index ecd131810..fc9864f85 100644 --- a/arch/arm/boot/dts/armada-39x.dtsi +++ b/arch/arm/boot/dts/armada-39x.dtsi @@ -128,7 +128,8 @@ }; spi0: spi@10600 { - compatible = "marvell,orion-spi"; + compatible = "marvell,armada-390-spi", + "marvell,orion-spi"; reg = <0x10600 0x50>; #address-cells = <1>; #size-cells = <0>; @@ -139,7 +140,8 @@ }; spi1: spi@10680 { - compatible = "marvell,orion-spi"; + compatible = "marvell,armada-390-spi", + "marvell,orion-spi"; reg = <0x10680 0x50>; #address-cells = <1>; #size-cells = <0>; diff --git a/arch/arm/boot/dts/armada-xp-axpwifiap.dts b/arch/arm/boot/dts/armada-xp-axpwifiap.dts index dfd782b44..60bbfe32b 100644 --- a/arch/arm/boot/dts/armada-xp-axpwifiap.dts +++ b/arch/arm/boot/dts/armada-xp-axpwifiap.dts @@ -140,7 +140,7 @@ spi-flash@0 { #address-cells = <1>; #size-cells = <1>; - compatible = "n25q128a13"; + compatible = "n25q128a13", "jedec,spi-nor"; reg = <0>; /* Chip select 0 */ spi-max-frequency = <108000000>; }; diff --git a/arch/arm/boot/dts/armada-xp-db.dts b/arch/arm/boot/dts/armada-xp-db.dts index 103782407..7dd900f15 100644 --- a/arch/arm/boot/dts/armada-xp-db.dts +++ b/arch/arm/boot/dts/armada-xp-db.dts @@ -222,7 +222,7 @@ spi-flash@0 { #address-cells = <1>; #size-cells = <1>; - compatible = "m25p64"; + compatible = "m25p64", "jedec,spi-nor"; reg = <0>; /* Chip select 0 */ spi-max-frequency = <20000000>; }; diff --git a/arch/arm/boot/dts/armada-xp-gp.dts b/arch/arm/boot/dts/armada-xp-gp.dts index 565227eac..bf724ca96 100644 --- a/arch/arm/boot/dts/armada-xp-gp.dts +++ b/arch/arm/boot/dts/armada-xp-gp.dts @@ -227,7 +227,7 @@ spi-flash@0 { #address-cells = <1>; #size-cells = <1>; - compatible = "n25q128a13"; + compatible = "n25q128a13", "jedec,spi-nor"; reg = <0>; /* Chip select 0 */ spi-max-frequency = <108000000>; }; diff --git a/arch/arm/boot/dts/armada-xp-synology-ds414.dts b/arch/arm/boot/dts/armada-xp-synology-ds414.dts index 6063428fa..20267ad2f 100644 --- a/arch/arm/boot/dts/armada-xp-synology-ds414.dts +++ b/arch/arm/boot/dts/armada-xp-synology-ds414.dts @@ -114,7 +114,7 @@ spi-flash@0 { #address-cells = <1>; #size-cells = <1>; - compatible = "micron,n25q064"; + compatible = "micron,n25q064", "jedec,spi-nor"; reg = <0>; /* Chip select 0 */ spi-max-frequency = <20000000>; diff --git a/arch/arm/boot/dts/armada-xp.dtsi b/arch/arm/boot/dts/armada-xp.dtsi index 8fdd6d7c0..3de9b761c 100644 --- a/arch/arm/boot/dts/armada-xp.dtsi +++ b/arch/arm/boot/dts/armada-xp.dtsi @@ -85,10 +85,18 @@ }; spi0: spi@10600 { + compatible = "marvell,armada-xp-spi", + "marvell,orion-spi"; pinctrl-0 = <&spi0_pins>; pinctrl-names = "default"; }; + spi1: spi@10680 { + compatible = "marvell,armada-xp-spi", + "marvell,orion-spi"; + }; + + i2c0: i2c@11000 { compatible = "marvell,mv78230-i2c", "marvell,mv64xxx-i2c"; reg = <0x11000 0x100>; @@ -297,7 +305,7 @@ spi0_pins: spi0-pins { marvell,pins = "mpp36", "mpp37", "mpp38", "mpp39"; - marvell,function = "spi"; + marvell,function = "spi0"; }; uart2_pins: uart2-pins { diff --git a/arch/arm/boot/dts/armv7-m.dtsi b/arch/arm/boot/dts/armv7-m.dtsi index 5a660d0fa..b1ad7cf6a 100644 --- a/arch/arm/boot/dts/armv7-m.dtsi +++ b/arch/arm/boot/dts/armv7-m.dtsi @@ -8,6 +8,12 @@ reg = <0xe000e100 0xc00>; }; + systick: timer@e000e010 { + compatible = "arm,armv7m-systick"; + reg = <0xe000e010 0x10>; + status = "disabled"; + }; + soc { #address-cells = <1>; #size-cells = <1>; diff --git a/arch/arm/boot/dts/at91-ariettag25.dts b/arch/arm/boot/dts/at91-ariettag25.dts new file mode 100644 index 000000000..c51450208 --- /dev/null +++ b/arch/arm/boot/dts/at91-ariettag25.dts @@ -0,0 +1,79 @@ +/* + * Device Tree file for Arietta G25 + * This device tree is minimal, to activate more peripherals, see: + * http://dts.acmesystems.it/arietta/ + */ +/dts-v1/; +#include "at91sam9g25.dtsi" +/ { + model = "Acme Systems Arietta G25"; + compatible = "acme,ariettag25", "atmel,at91sam9x5", "atmel,at91sam9"; + + aliases { + serial0 = &dbgu; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + memory { + reg = <0x20000000 0x8000000>; + }; + + clocks { + slow_xtal { + clock-frequency = <32768>; + }; + + main_xtal { + clock-frequency = <12000000>; + }; + }; + + ahb { + apb { + mmc0: mmc@f0008000 { + pinctrl-0 = < + &pinctrl_mmc0_slot0_clk_cmd_dat0 + &pinctrl_mmc0_slot0_dat1_3>; + status = "okay"; + + slot@0 { + reg = <0>; + bus-width = <4>; + }; + }; + + usb2: gadget@f803c000 { + status = "okay"; + }; + + dbgu: serial@fffff200 { + status = "okay"; + }; + + rtc@fffffeb0 { + status = "okay"; + }; + }; + + usb0: ohci@00600000 { + status = "okay"; + num-ports = <3>; + }; + + usb1: ehci@00700000 { + status = "okay"; + }; + }; + + leds { + compatible = "gpio-leds"; + arietta_led { + label = "arietta_led"; + gpios = <&pioB 8 GPIO_ACTIVE_HIGH>; /* PB8 */ + linux,default-trigger = "heartbeat"; + }; + }; +}; diff --git a/arch/arm/boot/dts/at91-kizbox.dts b/arch/arm/boot/dts/at91-kizbox.dts new file mode 100644 index 000000000..bf18ece0c --- /dev/null +++ b/arch/arm/boot/dts/at91-kizbox.dts @@ -0,0 +1,159 @@ +/* + * at91-kizbox.dts - Device Tree file for Overkiz Kizbox board + * + * Copyright (C) 2012-2014 Boris BREZILLON <b.brezillon@overkiz.com> + * 2014-2015 Gaël PORTAY <g.portay@overkiz.com> + * + * Licensed under GPLv2 or later. + */ +/dts-v1/; +#include "at91sam9g20.dtsi" +#include <dt-bindings/pwm/pwm.h> + +/ { + model = "Overkiz Kizbox"; + compatible = "overkiz,kizbox", "atmel,at91sam9g20", "atmel,at91sam9"; + + chosen { + bootargs = "ubi.mtd=ubi"; + stdout-path = &dbgu; + }; + + memory { + reg = <0x20000000 0x2000000>; + }; + + clocks { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + main_clock: clock@0 { + compatible = "atmel,osc", "fixed-clock"; + clock-frequency = <18432000>; + }; + + main_xtal { + clock-frequency = <18432000>; + }; + }; + + ahb { + apb { + macb0: ethernet@fffc4000 { + phy-mode = "mii"; + pinctrl-0 = <&pinctrl_macb_rmii + &pinctrl_macb_rmii_mii_alt>; + status = "okay"; + }; + + usart3: serial@fffd0000 { + status = "okay"; + }; + + dbgu: serial@fffff200 { + status = "okay"; + }; + + watchdog@fffffd40 { + timeout-sec = <15>; + atmel,max-heartbeat-sec = <16>; + atmel,min-heartbeat-sec = <0>; + status = "okay"; + }; + }; + + usb0: ohci@00500000 { + num-ports = <1>; + status = "okay"; + }; + + nand0: nand@40000000 { + nand-bus-width = <8>; + nand-ecc-mode = "soft"; + status = "okay"; + + bootstrap@0 { + label = "bootstrap"; + reg = <0x0 0x20000>; + }; + + ubi@20000 { + label = "ubi"; + reg = <0x20000 0x7fe0000>; + }; + }; + }; + + gpio_keys { + compatible = "gpio-keys"; + #address-cells = <1>; + #size-cells = <0>; + + reset { + label = "PB_RST"; + gpios = <&pioB 30 GPIO_ACTIVE_HIGH>; + linux,code = <0x100>; + gpio-key,wakeup; + }; + + user { + label = "PB_USER"; + gpios = <&pioB 31 GPIO_ACTIVE_HIGH>; + linux,code = <0x101>; + gpio-key,wakeup; + }; + }; + + i2c@0 { + status = "okay"; + + rtc: pcf8563@51 { + compatible = "nxp,pcf8563"; + reg = <0x51>; + }; + }; + + pwm_leds { + compatible = "pwm-leds"; + + network_green { + label = "pwm:green:network"; + pwms = <&tcb_pwm 2 10000000 PWM_POLARITY_INVERTED>; + max-brightness = <255>; + linux,default-trigger = "default-on"; + }; + + network_red { + label = "pwm:red:network"; + pwms = <&tcb_pwm 4 10000000 PWM_POLARITY_INVERTED>; + max-brightness = <255>; + linux,default-trigger = "default-on"; + }; + + user_green { + label = "pwm:green:user"; + pwms = <&tcb_pwm 0 10000000 PWM_POLARITY_INVERTED>; + max-brightness = <255>; + linux,default-trigger = "default-on"; + }; + + user_red { + label = "pwm:red:user"; + pwms = <&tcb_pwm 1 10000000 PWM_POLARITY_INVERTED>; + max-brightness = <255>; + linux,default-trigger = "default-on"; + }; + }; + + tcb_pwm: pwm { + compatible = "atmel,tcb-pwm"; + #pwm-cells = <3>; + tc-block = <1>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_tcb1_tioa0 + &pinctrl_tcb1_tioa1 + &pinctrl_tcb1_tioa2 + &pinctrl_tcb1_tiob0>; + }; +}; diff --git a/arch/arm/boot/dts/at91-kizbox2.dts b/arch/arm/boot/dts/at91-kizbox2.dts new file mode 100644 index 000000000..f0b1563cb --- /dev/null +++ b/arch/arm/boot/dts/at91-kizbox2.dts @@ -0,0 +1,216 @@ +/* + * at91-kizbox2.dts - Device Tree file for Overkiz Kizbox 2 board + * + * Copyright (C) 2014 Gaël PORTAY <g.portay@overkiz.com> + * + * Licensed under GPLv2 or later. + */ +/dts-v1/; +#include "sama5d31.dtsi" +#include <dt-bindings/pwm/pwm.h> + +/ { + model = "Overkiz Kizbox 2"; + compatible = "overkiz,kizbox2", "atmel,sama5d31", "atmel,sama5d3", "atmel,sama5"; + + chosen { + bootargs = "ubi.mtd=ubi"; + stdout-path = &dbgu; + }; + + memory { + reg = <0x20000000 0x10000000>; + }; + + clocks { + slow_xtal { + clock-frequency = <32768>; + }; + + main_xtal { + clock-frequency = <12000000>; + }; + }; + + ahb { + apb { + i2c1: i2c@f0018000 { + status = "okay"; + + pmic: act8865@5b { + compatible = "active-semi,act8865"; + reg = <0x5b>; + status = "okay"; + + regulators { + vcc_1v8_reg: DCDC_REG1 { + regulator-name = "VCC_1V8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + vcc_1v2_reg: DCDC_REG2 { + regulator-name = "VCC_1V2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + }; + + vcc_3v3_reg: DCDC_REG3 { + regulator-name = "VCC_3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + vddfuse_reg: LDO_REG1 { + regulator-name = "FUSE_2V5"; + regulator-min-microvolt = <2500000>; + regulator-max-microvolt = <2500000>; + }; + + vddana_reg: LDO_REG2 { + regulator-name = "VDDANA"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + vled_reg: LDO_REG3 { + regulator-name = "VLED"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + v3v8_rf_reg: LDO_REG4 { + regulator-name = "V3V8_RF"; + regulator-min-microvolt = <3800000>; + regulator-max-microvolt = <3800000>; + regulator-always-on; + }; + }; + }; + }; + + usart0: serial@f001c000 { + status = "okay"; + }; + + usart1: serial@f0020000 { + status = "okay"; + }; + + pwm0: pwm@f002c000 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm0_pwmh0_1 + &pinctrl_pwm0_pwmh1_1 + &pinctrl_pwm0_pwmh2_0>; + status = "okay"; + }; + + adc0: adc@f8018000 { + atmel,adc-vref = <3333>; + status = "okay"; + }; + + usart2: serial@f8020000 { + status = "okay"; + }; + + macb1: ethernet@f802c000 { + phy-mode = "rmii"; + status = "okay"; + }; + + dbgu: serial@ffffee00 { + status = "okay"; + }; + + watchdog@fffffe40 { + status = "okay"; + }; + }; + + usb1: ohci@00600000 { + status = "okay"; + }; + + usb2: ehci@00700000 { + status = "okay"; + }; + + nand0: nand@60000000 { + nand-bus-width = <8>; + nand-ecc-mode = "hw"; + atmel,has-pmecc; + atmel,pmecc-cap = <4>; + atmel,pmecc-sector-size = <512>; + nand-on-flash-bbt; + status = "okay"; + + bootstrap@0 { + label = "bootstrap"; + reg = <0x0 0x20000>; + }; + + ubi@20000 { + label = "ubi"; + reg = <0x20000 0x7fe0000>; + }; + }; + }; + + gpio_keys { + compatible = "gpio-keys"; + #address-cells = <1>; + #size-cells = <0>; + + prog { + label = "PB_PROG"; + gpios = <&pioE 27 GPIO_ACTIVE_LOW>; + linux,code = <0x102>; + gpio-key,wakeup; + }; + + reset { + label = "PB_RST"; + gpios = <&pioE 29 GPIO_ACTIVE_LOW>; + linux,code = <0x100>; + gpio-key,wakeup; + }; + + user { + label = "PB_USER"; + gpios = <&pioE 31 GPIO_ACTIVE_HIGH>; + linux,code = <0x101>; + gpio-key,wakeup; + }; + }; + + pwm_leds { + compatible = "pwm-leds"; + + blue { + label = "pwm:blue:user"; + pwms = <&pwm0 2 10000000 0>; + max-brightness = <255>; + linux,default-trigger = "default-on"; + }; + + green { + label = "pwm:green:user"; + pwms = <&pwm0 1 10000000 0>; + max-brightness = <255>; + linux,default-trigger = "default-on"; + }; + + red { + label = "pwm:red:user"; + pwms = <&pwm0 0 10000000 0>; + max-brightness = <255>; + linux,default-trigger = "default-on"; + }; + }; +}; diff --git a/arch/arm/boot/dts/at91-kizboxmini.dts b/arch/arm/boot/dts/at91-kizboxmini.dts new file mode 100644 index 000000000..9f72b4932 --- /dev/null +++ b/arch/arm/boot/dts/at91-kizboxmini.dts @@ -0,0 +1,129 @@ +/* + * at91-kizboxmini.dts - Device Tree file for Overkiz Kizbox mini board + * + * Copyright (C) 2014 Gaël PORTAY <g.portay@overkiz.com> + * + * Licensed under GPLv2 or later. + */ +/dts-v1/; +#include "at91sam9g25.dtsi" +#include <dt-bindings/pwm/pwm.h> + +/ { + model = "Overkiz Kizbox mini"; + compatible = "overkiz,kizboxmini", "atmel,at91sam9g25", "atmel,at91sam9x5", "atmel,at91sam9"; + + chosen { + bootargs = "ubi.mtd=ubi"; + stdout-path = &dbgu; + }; + + memory { + reg = <0x20000000 0x8000000>; + }; + + clocks { + slow_xtal { + clock-frequency = <32768>; + }; + + main_xtal { + clock-frequency = <12000000>; + }; + }; + + ahb { + apb { + usart0: serial@f801c000 { + status = "okay"; + }; + + macb0: ethernet@f802c000 { + phy-mode = "rmii"; + status = "okay"; + }; + + pwm0: pwm@f8034000 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm0_pwm0_1 + &pinctrl_pwm0_pwm1_1>; + status = "okay"; + }; + + dbgu: serial@fffff200 { + status = "okay"; + }; + + watchdog@fffffe40 { + status = "okay"; + }; + }; + + usb0: ohci@00600000 { + num-ports = <1>; + status = "okay"; + }; + + usb1: ehci@00700000 { + status = "okay"; + }; + + nand0: nand@40000000 { + nand-bus-width = <8>; + nand-ecc-mode = "hw"; + atmel,has-pmecc; + atmel,pmecc-cap = <4>; + atmel,pmecc-sector-size = <512>; + nand-on-flash-bbt; + status = "okay"; + + bootstrap@0 { + label = "bootstrap"; + reg = <0x0 0x20000>; + }; + + ubi@20000 { + label = "ubi"; + reg = <0x20000 0x7fe0000>; + }; + }; + }; + + gpio_keys { + compatible = "gpio-keys"; + #address-cells = <1>; + #size-cells = <0>; + + prog { + label = "PB_PROG"; + gpios = <&pioC 17 GPIO_ACTIVE_LOW>; + linux,code = <0x102>; + gpio-key,wakeup; + }; + + reset { + label = "PB_RST"; + gpios = <&pioC 16 GPIO_ACTIVE_LOW>; + linux,code = <0x100>; + gpio-key,wakeup; + }; + }; + + pwm_leds { + compatible = "pwm-leds"; + + green { + label = "pwm:green:user"; + pwms = <&pwm0 0 10000000 0>; + max-brightness = <255>; + linux,default-trigger = "default-on"; + }; + + red { + label = "pwm:red:user"; + pwms = <&pwm0 1 10000000 0>; + max-brightness = <255>; + linux,default-trigger = "default-on"; + }; + }; +}; diff --git a/arch/arm/boot/dts/at91-sama5d3_xplained.dts b/arch/arm/boot/dts/at91-sama5d3_xplained.dts index 9991240b7..d81474e0b 100644 --- a/arch/arm/boot/dts/at91-sama5d3_xplained.dts +++ b/arch/arm/boot/dts/at91-sama5d3_xplained.dts @@ -14,7 +14,7 @@ compatible = "atmel,sama5d3-xplained", "atmel,sama5d3", "atmel,sama5"; chosen { - bootargs = "console=ttyS0,115200"; + stdout-path = "serial0:115200n8"; }; memory { @@ -35,6 +35,8 @@ apb { mmc0: mmc@f0000000 { pinctrl-0 = <&pinctrl_mmc0_clk_cmd_dat0 &pinctrl_mmc0_dat1_3 &pinctrl_mmc0_dat4_7 &pinctrl_mmc0_cd>; + vmmc-supply = <&vcc_mmc0_reg>; + vqmmc-supply = <&vcc_3v3_reg>; status = "okay"; slot@0 { reg = <0>; @@ -43,6 +45,17 @@ }; }; + mmc1: mmc@f8000000 { + vmmc-supply = <&vcc_3v3_reg>; + vqmmc-supply = <&vcc_3v3_reg>; + status = "disabled"; + slot@0 { + reg = <0>; + bus-width = <4>; + cd-gpios = <&pioE 1 GPIO_ACTIVE_LOW>; + }; + }; + spi0: spi@f0004000 { cs-gpios = <&pioD 13 0>, <0>, <0>, <&pioD 16 0>; status = "okay"; @@ -105,7 +118,13 @@ macb0: ethernet@f0028000 { phy-mode = "rgmii"; + #address-cells = <1>; + #size-cells = <0>; status = "okay"; + + ethernet-phy@7 { + reg = <0x7>; + }; }; pwm0: pwm@f002c000 { @@ -215,12 +234,6 @@ }; }; }; - - pmc: pmc@fffffc00 { - main: mainck { - clock-frequency = <12000000>; - }; - }; }; nand0: nand@60000000 { @@ -284,6 +297,14 @@ }; }; + vcc_mmc0_reg: fixedregulator@0 { + compatible = "regulator-fixed"; + gpio = <&pioE 2 GPIO_ACTIVE_LOW>; + regulator-name = "mmc0-card-supply"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + gpio_keys { compatible = "gpio-keys"; diff --git a/arch/arm/boot/dts/at91-sama5d4_xplained.dts b/arch/arm/boot/dts/at91-sama5d4_xplained.dts index c740e1a2a..22ad7c959 100644 --- a/arch/arm/boot/dts/at91-sama5d4_xplained.dts +++ b/arch/arm/boot/dts/at91-sama5d4_xplained.dts @@ -50,7 +50,8 @@ compatible = "atmel,sama5d4-xplained", "atmel,sama5d4", "atmel,sama5"; chosen { - bootargs = "console=ttyS0,115200 ignore_loglevel earlyprintk"; + bootargs = "ignore_loglevel earlyprintk"; + stdout-path = "serial0:115200n8"; }; memory { @@ -106,6 +107,8 @@ mmc1: mmc@fc000000 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_mmc1_clk_cmd_dat0 &pinctrl_mmc1_dat1_3 &pinctrl_mmc1_cd>; + vmmc-supply = <&vcc_mmc1_reg>; + vqmmc-supply = <&vcc_3v3_reg>; status = "okay"; slot@0 { reg = <0>; @@ -122,6 +125,11 @@ status = "okay"; }; + spi1: spi@fc018000 { + cs-gpios = <&pioB 21 0>; + status = "okay"; + }; + adc0: adc@fc034000 { atmel,adc-vref = <3300>; status = "okay"; @@ -238,4 +246,22 @@ linux,default-trigger = "heartbeat"; }; }; + + vcc_3v3_reg: fixedregulator@0 { + compatible = "regulator-fixed"; + regulator-name = "VCC 3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + + vcc_mmc1_reg: fixedregulator@1 { + compatible = "regulator-fixed"; + gpio = <&pioE 4 GPIO_ACTIVE_LOW>; + regulator-name = "VDD MCI1"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&vcc_3v3_reg>; + }; }; diff --git a/arch/arm/boot/dts/at91-sama5d4ek.dts b/arch/arm/boot/dts/at91-sama5d4ek.dts index 45e7761b7..d782f2926 100644 --- a/arch/arm/boot/dts/at91-sama5d4ek.dts +++ b/arch/arm/boot/dts/at91-sama5d4ek.dts @@ -50,7 +50,8 @@ compatible = "atmel,sama5d4ek", "atmel,sama5d4", "atmel,sama5"; chosen { - bootargs = "console=ttyS0,115200 ignore_loglevel earlyprintk"; + bootargs = "ignore_loglevel earlyprintk"; + stdout-path = "serial0:115200n8"; }; memory { diff --git a/arch/arm/boot/dts/at91rm9200.dtsi b/arch/arm/boot/dts/at91rm9200.dtsi index 4fb333bd1..e3cfb9972 100644 --- a/arch/arm/boot/dts/at91rm9200.dtsi +++ b/arch/arm/boot/dts/at91rm9200.dtsi @@ -92,7 +92,7 @@ }; ramc0: ramc@ffffff00 { - compatible = "atmel,at91rm9200-sdramc"; + compatible = "atmel,at91rm9200-sdramc", "syscon"; reg = <0xffffff00 0x100>; }; @@ -940,8 +940,8 @@ compatible = "atmel,at91rm9200-ohci", "usb-ohci"; reg = <0x00300000 0x100000>; interrupts = <23 IRQ_TYPE_LEVEL_HIGH 2>; - clocks = <&usb>, <&ohci_clk>, <&ohci_clk>, <&uhpck>; - clock-names = "usb_clk", "ohci_clk", "hclk", "uhpck"; + clocks = <&ohci_clk>, <&ohci_clk>, <&uhpck>; + clock-names = "ohci_clk", "hclk", "uhpck"; status = "disabled"; }; }; diff --git a/arch/arm/boot/dts/at91rm9200ek.dts b/arch/arm/boot/dts/at91rm9200ek.dts index 2a5d21247..8dab4b75c 100644 --- a/arch/arm/boot/dts/at91rm9200ek.dts +++ b/arch/arm/boot/dts/at91rm9200ek.dts @@ -12,6 +12,10 @@ model = "Atmel AT91RM9200 evaluation kit"; compatible = "atmel,at91rm9200ek", "atmel,at91rm9200"; + chosen { + stdout-path = "serial0:115200n8"; + }; + memory { reg = <0x20000000 0x4000000>; }; diff --git a/arch/arm/boot/dts/at91sam9260.dtsi b/arch/arm/boot/dts/at91sam9260.dtsi index d88fe62a2..4bc347549 100644 --- a/arch/arm/boot/dts/at91sam9260.dtsi +++ b/arch/arm/boot/dts/at91sam9260.dtsi @@ -1008,8 +1008,8 @@ compatible = "atmel,at91rm9200-ohci", "usb-ohci"; reg = <0x00500000 0x100000>; interrupts = <20 IRQ_TYPE_LEVEL_HIGH 2>; - clocks = <&usb>, <&ohci_clk>, <&ohci_clk>, <&uhpck>; - clock-names = "usb_clk", "ohci_clk", "hclk", "uhpck"; + clocks = <&ohci_clk>, <&ohci_clk>, <&uhpck>; + clock-names = "ohci_clk", "hclk", "uhpck"; status = "disabled"; }; }; diff --git a/arch/arm/boot/dts/at91sam9261.dtsi b/arch/arm/boot/dts/at91sam9261.dtsi index bf8d1856a..b2c44a07a 100644 --- a/arch/arm/boot/dts/at91sam9261.dtsi +++ b/arch/arm/boot/dts/at91sam9261.dtsi @@ -75,8 +75,8 @@ compatible = "atmel,at91rm9200-ohci", "usb-ohci"; reg = <0x00500000 0x100000>; interrupts = <20 IRQ_TYPE_LEVEL_HIGH 2>; - clocks = <&usb>, <&ohci_clk>, <&hclk0>, <&uhpck>; - clock-names = "usb_clk", "ohci_clk", "hclk", "uhpck"; + clocks = <&ohci_clk>, <&hclk0>, <&uhpck>; + clock-names = "ohci_clk", "hclk", "uhpck"; status = "disabled"; }; diff --git a/arch/arm/boot/dts/at91sam9261ek.dts b/arch/arm/boot/dts/at91sam9261ek.dts index f4a765729..2e92ac020 100644 --- a/arch/arm/boot/dts/at91sam9261ek.dts +++ b/arch/arm/boot/dts/at91sam9261ek.dts @@ -13,7 +13,8 @@ compatible = "atmel,at91sam9261ek", "atmel,at91sam9261", "atmel,at91sam9"; chosen { - bootargs = "console=ttyS0,115200 rootfstype=ubifs ubi.mtd=5 root=ubi0:rootfs rw"; + bootargs = "rootfstype=ubifs ubi.mtd=5 root=ubi0:rootfs rw"; + stdout-path = "serial0:115200n8"; }; memory { diff --git a/arch/arm/boot/dts/at91sam9263.dtsi b/arch/arm/boot/dts/at91sam9263.dtsi index 111889b55..e36d966ef 100644 --- a/arch/arm/boot/dts/at91sam9263.dtsi +++ b/arch/arm/boot/dts/at91sam9263.dtsi @@ -1010,8 +1010,8 @@ compatible = "atmel,at91rm9200-ohci", "usb-ohci"; reg = <0x00a00000 0x100000>; interrupts = <29 IRQ_TYPE_LEVEL_HIGH 2>; - clocks = <&usb>, <&ohci_clk>, <&ohci_clk>, <&uhpck>; - clock-names = "usb_clk", "ohci_clk", "hclk", "uhpck"; + clocks = <&ohci_clk>, <&ohci_clk>, <&uhpck>; + clock-names = "ohci_clk", "hclk", "uhpck"; status = "disabled"; }; }; diff --git a/arch/arm/boot/dts/at91sam9263ek.dts b/arch/arm/boot/dts/at91sam9263ek.dts index 5cf93eecd..23381276f 100644 --- a/arch/arm/boot/dts/at91sam9263ek.dts +++ b/arch/arm/boot/dts/at91sam9263ek.dts @@ -13,7 +13,8 @@ compatible = "atmel,at91sam9263ek", "atmel,at91sam9263", "atmel,at91sam9"; chosen { - bootargs = "mem=64M console=ttyS0,115200 root=/dev/mtdblock5 rw rootfstype=ubifs"; + bootargs = "mem=64M root=/dev/mtdblock5 rw rootfstype=ubifs"; + stdout-path = "serial0:115200n8"; }; memory { diff --git a/arch/arm/boot/dts/at91sam9g20ek_common.dtsi b/arch/arm/boot/dts/at91sam9g20ek_common.dtsi index dfaacb113..57548a2c5 100644 --- a/arch/arm/boot/dts/at91sam9g20ek_common.dtsi +++ b/arch/arm/boot/dts/at91sam9g20ek_common.dtsi @@ -10,7 +10,8 @@ / { chosen { - bootargs = "mem=64M console=ttyS0,115200 root=/dev/mtdblock5 rw rootfstype=ubifs"; + bootargs = "mem=64M root=/dev/mtdblock5 rw rootfstype=ubifs"; + stdout-path = "serial0:115200n8"; }; memory { diff --git a/arch/arm/boot/dts/at91sam9g45.dtsi b/arch/arm/boot/dts/at91sam9g45.dtsi index e54421176..18177f5a7 100644 --- a/arch/arm/boot/dts/at91sam9g45.dtsi +++ b/arch/arm/boot/dts/at91sam9g45.dtsi @@ -1291,8 +1291,8 @@ compatible = "atmel,at91rm9200-ohci", "usb-ohci"; reg = <0x00700000 0x100000>; interrupts = <22 IRQ_TYPE_LEVEL_HIGH 2>; - clocks = <&usb>, <&uhphs_clk>, <&uhphs_clk>, <&uhpck>; - clock-names = "usb_clk", "ohci_clk", "hclk", "uhpck"; + clocks = <&uhphs_clk>, <&uhphs_clk>, <&uhpck>; + clock-names = "ohci_clk", "hclk", "uhpck"; status = "disabled"; }; @@ -1300,8 +1300,8 @@ compatible = "atmel,at91sam9g45-ehci", "usb-ehci"; reg = <0x00800000 0x100000>; interrupts = <22 IRQ_TYPE_LEVEL_HIGH 2>; - clocks = <&utmi>, <&uhphs_clk>, <&uhphs_clk>, <&uhpck>; - clock-names = "usb_clk", "ehci_clk", "hclk", "uhpck"; + clocks = <&utmi>, <&uhphs_clk>; + clock-names = "usb_clk", "ehci_clk"; status = "disabled"; }; }; diff --git a/arch/arm/boot/dts/at91sam9m10g45ek.dts b/arch/arm/boot/dts/at91sam9m10g45ek.dts index 33ce7ca2c..1375d3362 100644 --- a/arch/arm/boot/dts/at91sam9m10g45ek.dts +++ b/arch/arm/boot/dts/at91sam9m10g45ek.dts @@ -15,7 +15,8 @@ compatible = "atmel,at91sam9m10g45ek", "atmel,at91sam9g45", "atmel,at91sam9"; chosen { - bootargs = "mem=64M console=ttyS0,115200 root=/dev/mtdblock1 rw rootfstype=jffs2"; + bootargs = "mem=64M root=/dev/mtdblock1 rw rootfstype=jffs2"; + stdout-path = "serial0:115200n8"; }; memory { diff --git a/arch/arm/boot/dts/at91sam9n12.dtsi b/arch/arm/boot/dts/at91sam9n12.dtsi index a9e35dfc1..5c2a8c8c8 100644 --- a/arch/arm/boot/dts/at91sam9n12.dtsi +++ b/arch/arm/boot/dts/at91sam9n12.dtsi @@ -949,9 +949,8 @@ compatible = "atmel,at91rm9200-ohci", "usb-ohci"; reg = <0x00500000 0x00100000>; interrupts = <22 IRQ_TYPE_LEVEL_HIGH 2>; - clocks = <&usb>, <&uhphs_clk>, <&uhphs_clk>, - <&uhpck>; - clock-names = "usb_clk", "ohci_clk", "hclk", "uhpck"; + clocks = <&uhphs_clk>, <&uhphs_clk>, <&uhpck>; + clock-names = "ohci_clk", "hclk", "uhpck"; status = "disabled"; }; }; diff --git a/arch/arm/boot/dts/at91sam9n12ek.dts b/arch/arm/boot/dts/at91sam9n12ek.dts index 6e067c8a3..eab17fcac 100644 --- a/arch/arm/boot/dts/at91sam9n12ek.dts +++ b/arch/arm/boot/dts/at91sam9n12ek.dts @@ -14,7 +14,8 @@ compatible = "atmel,at91sam9n12ek", "atmel,at91sam9n12", "atmel,at91sam9"; chosen { - bootargs = "console=ttyS0,115200 root=/dev/mtdblock1 rw rootfstype=jffs2"; + bootargs = "root=/dev/mtdblock1 rw rootfstype=jffs2"; + stdout-path = "serial0:115200n8"; }; memory { diff --git a/arch/arm/boot/dts/at91sam9rl.dtsi b/arch/arm/boot/dts/at91sam9rl.dtsi index ebfd5ce9c..c9920c647 100644 --- a/arch/arm/boot/dts/at91sam9rl.dtsi +++ b/arch/arm/boot/dts/at91sam9rl.dtsi @@ -1065,13 +1065,6 @@ }; }; - rtc@fffffeb0 { - compatible = "atmel,at91rm9200-rtc"; - reg = <0xfffffeb0 0x40>; - interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>; - status = "disabled"; - }; - rtc@fffffd20 { compatible = "atmel,at91sam9260-rtt"; reg = <0xfffffd20 0x10>; @@ -1085,6 +1078,14 @@ reg = <0xfffffd60 0x10>; status = "disabled"; }; + + rtc@fffffe00 { + compatible = "atmel,at91rm9200-rtc"; + reg = <0xfffffe00 0x40>; + interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>; + status = "disabled"; + }; + }; }; diff --git a/arch/arm/boot/dts/at91sam9rlek.dts b/arch/arm/boot/dts/at91sam9rlek.dts index 9be5b540e..558c9f220 100644 --- a/arch/arm/boot/dts/at91sam9rlek.dts +++ b/arch/arm/boot/dts/at91sam9rlek.dts @@ -13,7 +13,8 @@ compatible = "atmel,at91sam9rlek", "atmel,at91sam9rl", "atmel,at91sam9"; chosen { - bootargs = "console=ttyS0,115200 rootfstype=ubifs root=ubi0:rootfs ubi.mtd=5 rw"; + bootargs = "rootfstype=ubifs root=ubi0:rootfs ubi.mtd=5 rw"; + stdout-path = "serial0:115200n8"; }; memory { @@ -181,13 +182,11 @@ }; }; - pmc: pmc@fffffc00 { - main: mainck { - clock-frequency = <12000000>; - }; + watchdog@fffffd40 { + status = "okay"; }; - watchdog@fffffd40 { + rtc@fffffe00 { status = "okay"; }; }; diff --git a/arch/arm/boot/dts/at91sam9x5.dtsi b/arch/arm/boot/dts/at91sam9x5.dtsi index 3314a7303..b6c8df8d3 100644 --- a/arch/arm/boot/dts/at91sam9x5.dtsi +++ b/arch/arm/boot/dts/at91sam9x5.dtsi @@ -505,7 +505,7 @@ pinctrl_usart1_sck: usart1_sck-0 { atmel,pins = - <AT91_PIOC 28 AT91_PERIPH_C AT91_PINCTRL_NONE>; /* PC29 periph C */ + <AT91_PIOC 29 AT91_PERIPH_C AT91_PINCTRL_NONE>; /* PC29 periph C */ }; }; @@ -694,6 +694,52 @@ }; }; + pwm0 { + pinctrl_pwm0_pwm0_0: pwm0_pwm0-0 { + atmel,pins = + <AT91_PIOB 11 AT91_PERIPH_B AT91_PINCTRL_NONE>; + }; + pinctrl_pwm0_pwm0_1: pwm0_pwm0-1 { + atmel,pins = + <AT91_PIOC 10 AT91_PERIPH_C AT91_PINCTRL_NONE>; + }; + pinctrl_pwm0_pwm0_2: pwm0_pwm0-2 { + atmel,pins = + <AT91_PIOC 18 AT91_PERIPH_C AT91_PINCTRL_NONE>; + }; + + pinctrl_pwm0_pwm1_0: pwm0_pwm1-0 { + atmel,pins = + <AT91_PIOB 12 AT91_PERIPH_B AT91_PINCTRL_NONE>; + }; + pinctrl_pwm0_pwm1_1: pwm0_pwm1-1 { + atmel,pins = + <AT91_PIOC 11 AT91_PERIPH_C AT91_PINCTRL_NONE>; + }; + pinctrl_pwm0_pwm1_2: pwm0_pwm1-2 { + atmel,pins = + <AT91_PIOC 19 AT91_PERIPH_C AT91_PINCTRL_NONE>; + }; + + pinctrl_pwm0_pwm2_0: pwm0_pwm2-0 { + atmel,pins = + <AT91_PIOB 13 AT91_PERIPH_B AT91_PINCTRL_NONE>; + }; + pinctrl_pwm0_pwm2_1: pwm0_pwm2-1 { + atmel,pins = + <AT91_PIOC 20 AT91_PERIPH_C AT91_PINCTRL_NONE>; + }; + + pinctrl_pwm0_pwm3_0: pwm0_pwm3-0 { + atmel,pins = + <AT91_PIOB 14 AT91_PERIPH_B AT91_PINCTRL_NONE>; + }; + pinctrl_pwm0_pwm3_1: pwm0_pwm3-1 { + atmel,pins = + <AT91_PIOC 21 AT91_PERIPH_C AT91_PINCTRL_NONE>; + }; + }; + tcb0 { pinctrl_tcb0_tclk0: tcb0_tclk0-0 { atmel,pins = <AT91_PIOA 24 AT91_PERIPH_A AT91_PINCTRL_NONE>; @@ -1176,8 +1222,8 @@ compatible = "atmel,at91rm9200-ohci", "usb-ohci"; reg = <0x00600000 0x100000>; interrupts = <22 IRQ_TYPE_LEVEL_HIGH 2>; - clocks = <&usb>, <&uhphs_clk>, <&uhphs_clk>, <&uhpck>; - clock-names = "usb_clk", "ohci_clk", "hclk", "uhpck"; + clocks = <&uhphs_clk>, <&uhphs_clk>, <&uhpck>; + clock-names = "ohci_clk", "hclk", "uhpck"; status = "disabled"; }; @@ -1185,8 +1231,8 @@ compatible = "atmel,at91sam9g45-ehci", "usb-ehci"; reg = <0x00700000 0x100000>; interrupts = <22 IRQ_TYPE_LEVEL_HIGH 2>; - clocks = <&utmi>, <&uhphs_clk>, <&uhpck>; - clock-names = "usb_clk", "ehci_clk", "uhpck"; + clocks = <&utmi>, <&uhphs_clk>; + clock-names = "usb_clk", "ehci_clk"; status = "disabled"; }; }; diff --git a/arch/arm/boot/dts/at91sam9x5ek.dtsi b/arch/arm/boot/dts/at91sam9x5ek.dtsi index cc83a37a7..d237c462d 100644 --- a/arch/arm/boot/dts/at91sam9x5ek.dtsi +++ b/arch/arm/boot/dts/at91sam9x5ek.dtsi @@ -13,7 +13,8 @@ compatible = "atmel,at91sam9x5ek", "atmel,at91sam9x5", "atmel,at91sam9"; chosen { - bootargs = "console=ttyS0,115200 root=/dev/mtdblock1 rw rootfstype=ubifs ubi.mtd=1 root=ubi0:rootfs"; + bootargs = "root=/dev/mtdblock1 rw rootfstype=ubifs ubi.mtd=1 root=ubi0:rootfs"; + stdout-path = "serial0:115200n8"; }; ahb { diff --git a/arch/arm/boot/dts/atlas7.dtsi b/arch/arm/boot/dts/atlas7.dtsi index a753178ab..3e21311f9 100644 --- a/arch/arm/boot/dts/atlas7.dtsi +++ b/arch/arm/boot/dts/atlas7.dtsi @@ -38,6 +38,21 @@ }; }; + clocks { + xinw { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <32768>; + clock-output-names = "xinw"; + }; + xin { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <26000000>; + clock-output-names = "xin"; + }; + }; + noc { compatible = "simple-bus"; #address-cells = <1>; @@ -120,6 +135,1025 @@ compatible = "sirf,atlas7-ioc"; reg = <0x18880000 0x1000>, <0x10E40000 0x1000>; + + audio_ac97_pmx: audio_ac97@0 { + audio_ac97 { + groups = "audio_ac97_grp"; + function = "audio_ac97"; + }; + }; + + audio_func_dbg_pmx: audio_func_dbg@0 { + audio_func_dbg { + groups = "audio_func_dbg_grp"; + function = "audio_func_dbg"; + }; + }; + + audio_i2s_pmx: audio_i2s@0 { + audio_i2s { + groups = "audio_i2s_grp"; + function = "audio_i2s"; + }; + }; + + audio_i2s_2ch_pmx: audio_i2s_2ch@0 { + audio_i2s_2ch { + groups = "audio_i2s_2ch_grp"; + function = "audio_i2s_2ch"; + }; + }; + + audio_i2s_extclk_pmx: audio_i2s_extclk@0 { + audio_i2s_extclk { + groups = "audio_i2s_extclk_grp"; + function = "audio_i2s_extclk"; + }; + }; + + audio_uart0_pmx: audio_uart0@0 { + audio_uart0 { + groups = "audio_uart0_grp"; + function = "audio_uart0"; + }; + }; + + audio_uart1_pmx: audio_uart1@0 { + audio_uart1 { + groups = "audio_uart1_grp"; + function = "audio_uart1"; + }; + }; + + audio_uart2_pmx0: audio_uart2@0 { + audio_uart2_0 { + groups = "audio_uart2_grp0"; + function = "audio_uart2_m0"; + }; + }; + + audio_uart2_pmx1: audio_uart2@1 { + audio_uart2_1 { + groups = "audio_uart2_grp1"; + function = "audio_uart2_m1"; + }; + }; + + c_can_trnsvr_pmx: c_can_trnsvr@0 { + c_can_trnsvr { + groups = "c_can_trnsvr_grp"; + function = "c_can_trnsvr"; + }; + }; + + c0_can_pmx0: c0_can@0 { + c0_can_0 { + groups = "c0_can_grp0"; + function = "c0_can_m0"; + }; + }; + + c0_can_pmx1: c0_can@1 { + c0_can_1 { + groups = "c0_can_grp1"; + function = "c0_can_m1"; + }; + }; + + c1_can_pmx0: c1_can@0 { + c1_can_0 { + groups = "c1_can_grp0"; + function = "c1_can_m0"; + }; + }; + + c1_can_pmx1: c1_can@1 { + c1_can_1 { + groups = "c1_can_grp1"; + function = "c1_can_m1"; + }; + }; + + c1_can_pmx2: c1_can@2 { + c1_can_2 { + groups = "c1_can_grp2"; + function = "c1_can_m2"; + }; + }; + + ca_audio_lpc_pmx: ca_audio_lpc@0 { + ca_audio_lpc { + groups = "ca_audio_lpc_grp"; + function = "ca_audio_lpc"; + }; + }; + + ca_bt_lpc_pmx: ca_bt_lpc@0 { + ca_bt_lpc { + groups = "ca_bt_lpc_grp"; + function = "ca_bt_lpc"; + }; + }; + + ca_coex_pmx: ca_coex@0 { + ca_coex { + groups = "ca_coex_grp"; + function = "ca_coex"; + }; + }; + + ca_curator_lpc_pmx: ca_curator_lpc@0 { + ca_curator_lpc { + groups = "ca_curator_lpc_grp"; + function = "ca_curator_lpc"; + }; + }; + + ca_pcm_debug_pmx: ca_pcm_debug@0 { + ca_pcm_debug { + groups = "ca_pcm_debug_grp"; + function = "ca_pcm_debug"; + }; + }; + + ca_pio_pmx: ca_pio@0 { + ca_pio { + groups = "ca_pio_grp"; + function = "ca_pio"; + }; + }; + + ca_sdio_debug_pmx: ca_sdio_debug@0 { + ca_sdio_debug { + groups = "ca_sdio_debug_grp"; + function = "ca_sdio_debug"; + }; + }; + + ca_spi_pmx: ca_spi@0 { + ca_spi { + groups = "ca_spi_grp"; + function = "ca_spi"; + }; + }; + + ca_trb_pmx: ca_trb@0 { + ca_trb { + groups = "ca_trb_grp"; + function = "ca_trb"; + }; + }; + + ca_uart_debug_pmx: ca_uart_debug@0 { + ca_uart_debug { + groups = "ca_uart_debug_grp"; + function = "ca_uart_debug"; + }; + }; + + clkc_pmx0: clkc@0 { + clkc_0 { + groups = "clkc_grp0"; + function = "clkc_m0"; + }; + }; + + clkc_pmx1: clkc@1 { + clkc_1 { + groups = "clkc_grp1"; + function = "clkc_m1"; + }; + }; + + gn_gnss_i2c_pmx: gn_gnss_i2c@0 { + gn_gnss_i2c { + groups = "gn_gnss_i2c_grp"; + function = "gn_gnss_i2c"; + }; + }; + + gn_gnss_uart_nopause_pmx: gn_gnss_uart_nopause@0 { + gn_gnss_uart_nopause { + groups = "gn_gnss_uart_nopause_grp"; + function = "gn_gnss_uart_nopause"; + }; + }; + + gn_gnss_uart_pmx: gn_gnss_uart@0 { + gn_gnss_uart { + groups = "gn_gnss_uart_grp"; + function = "gn_gnss_uart"; + }; + }; + + gn_trg_spi_pmx0: gn_trg_spi@0 { + gn_trg_spi_0 { + groups = "gn_trg_spi_grp0"; + function = "gn_trg_spi_m0"; + }; + }; + + gn_trg_spi_pmx1: gn_trg_spi@1 { + gn_trg_spi_1 { + groups = "gn_trg_spi_grp1"; + function = "gn_trg_spi_m1"; + }; + }; + + cvbs_dbg_pmx: cvbs_dbg@0 { + cvbs_dbg { + groups = "cvbs_dbg_grp"; + function = "cvbs_dbg"; + }; + }; + + cvbs_dbg_test_pmx0: cvbs_dbg_test@0 { + cvbs_dbg_test_0 { + groups = "cvbs_dbg_test_grp0"; + function = "cvbs_dbg_test_m0"; + }; + }; + + cvbs_dbg_test_pmx1: cvbs_dbg_test@1 { + cvbs_dbg_test_1 { + groups = "cvbs_dbg_test_grp1"; + function = "cvbs_dbg_test_m1"; + }; + }; + + cvbs_dbg_test_pmx2: cvbs_dbg_test@2 { + cvbs_dbg_test_2 { + groups = "cvbs_dbg_test_grp2"; + function = "cvbs_dbg_test_m2"; + }; + }; + + cvbs_dbg_test_pmx3: cvbs_dbg_test@3 { + cvbs_dbg_test_3 { + groups = "cvbs_dbg_test_grp3"; + function = "cvbs_dbg_test_m3"; + }; + }; + + cvbs_dbg_test_pmx4: cvbs_dbg_test@4 { + cvbs_dbg_test_4 { + groups = "cvbs_dbg_test_grp4"; + function = "cvbs_dbg_test_m4"; + }; + }; + + cvbs_dbg_test_pmx5: cvbs_dbg_test@5 { + cvbs_dbg_test_5 { + groups = "cvbs_dbg_test_grp5"; + function = "cvbs_dbg_test_m5"; + }; + }; + + cvbs_dbg_test_pmx6: cvbs_dbg_test@6 { + cvbs_dbg_test_6 { + groups = "cvbs_dbg_test_grp6"; + function = "cvbs_dbg_test_m6"; + }; + }; + + cvbs_dbg_test_pmx7: cvbs_dbg_test@7 { + cvbs_dbg_test_7 { + groups = "cvbs_dbg_test_grp7"; + function = "cvbs_dbg_test_m7"; + }; + }; + + cvbs_dbg_test_pmx8: cvbs_dbg_test@8 { + cvbs_dbg_test_8 { + groups = "cvbs_dbg_test_grp8"; + function = "cvbs_dbg_test_m8"; + }; + }; + + cvbs_dbg_test_pmx9: cvbs_dbg_test@9 { + cvbs_dbg_test_9 { + groups = "cvbs_dbg_test_grp9"; + function = "cvbs_dbg_test_m9"; + }; + }; + + cvbs_dbg_test_pmx10: cvbs_dbg_test@10 { + cvbs_dbg_test_10 { + groups = "cvbs_dbg_test_grp10"; + function = "cvbs_dbg_test_m10"; + }; + }; + + cvbs_dbg_test_pmx11: cvbs_dbg_test@11 { + cvbs_dbg_test_11 { + groups = "cvbs_dbg_test_grp11"; + function = "cvbs_dbg_test_m11"; + }; + }; + + cvbs_dbg_test_pmx12: cvbs_dbg_test@12 { + cvbs_dbg_test_12 { + groups = "cvbs_dbg_test_grp12"; + function = "cvbs_dbg_test_m12"; + }; + }; + + cvbs_dbg_test_pmx13: cvbs_dbg_test@13 { + cvbs_dbg_test_13 { + groups = "cvbs_dbg_test_grp13"; + function = "cvbs_dbg_test_m13"; + }; + }; + + cvbs_dbg_test_pmx14: cvbs_dbg_test@14 { + cvbs_dbg_test_14 { + groups = "cvbs_dbg_test_grp14"; + function = "cvbs_dbg_test_m14"; + }; + }; + + cvbs_dbg_test_pmx15: cvbs_dbg_test@15 { + cvbs_dbg_test_15 { + groups = "cvbs_dbg_test_grp15"; + function = "cvbs_dbg_test_m15"; + }; + }; + + gn_gnss_power_pmx: gn_gnss_power@0 { + gn_gnss_power { + groups = "gn_gnss_power_grp"; + function = "gn_gnss_power"; + }; + }; + + gn_gnss_sw_status_pmx: gn_gnss_sw_status@0 { + gn_gnss_sw_status { + groups = "gn_gnss_sw_status_grp"; + function = "gn_gnss_sw_status"; + }; + }; + + gn_gnss_eclk_pmx: gn_gnss_eclk@0 { + gn_gnss_eclk { + groups = "gn_gnss_eclk_grp"; + function = "gn_gnss_eclk"; + }; + }; + + gn_gnss_irq1_pmx0: gn_gnss_irq1@0 { + gn_gnss_irq1_0 { + groups = "gn_gnss_irq1_grp0"; + function = "gn_gnss_irq1_m0"; + }; + }; + + gn_gnss_irq2_pmx0: gn_gnss_irq2@0 { + gn_gnss_irq2_0 { + groups = "gn_gnss_irq2_grp0"; + function = "gn_gnss_irq2_m0"; + }; + }; + + gn_gnss_tm_pmx: gn_gnss_tm@0 { + gn_gnss_tm { + groups = "gn_gnss_tm_grp"; + function = "gn_gnss_tm"; + }; + }; + + gn_gnss_tsync_pmx: gn_gnss_tsync@0 { + gn_gnss_tsync { + groups = "gn_gnss_tsync_grp"; + function = "gn_gnss_tsync"; + }; + }; + + gn_io_gnsssys_sw_cfg_pmx: gn_io_gnsssys_sw_cfg@0 { + gn_io_gnsssys_sw_cfg { + groups = "gn_io_gnsssys_sw_cfg_grp"; + function = "gn_io_gnsssys_sw_cfg"; + }; + }; + + gn_trg_pmx0: gn_trg@0 { + gn_trg_0 { + groups = "gn_trg_grp0"; + function = "gn_trg_m0"; + }; + }; + + gn_trg_pmx1: gn_trg@1 { + gn_trg_1 { + groups = "gn_trg_grp1"; + function = "gn_trg_m1"; + }; + }; + + gn_trg_shutdown_pmx0: gn_trg_shutdown@0 { + gn_trg_shutdown_0 { + groups = "gn_trg_shutdown_grp0"; + function = "gn_trg_shutdown_m0"; + }; + }; + + gn_trg_shutdown_pmx1: gn_trg_shutdown@1 { + gn_trg_shutdown_1 { + groups = "gn_trg_shutdown_grp1"; + function = "gn_trg_shutdown_m1"; + }; + }; + + gn_trg_shutdown_pmx2: gn_trg_shutdown@2 { + gn_trg_shutdown_2 { + groups = "gn_trg_shutdown_grp2"; + function = "gn_trg_shutdown_m2"; + }; + }; + + gn_trg_shutdown_pmx3: gn_trg_shutdown@3 { + gn_trg_shutdown_3 { + groups = "gn_trg_shutdown_grp3"; + function = "gn_trg_shutdown_m3"; + }; + }; + + i2c0_pmx: i2c0@0 { + i2c0 { + groups = "i2c0_grp"; + function = "i2c0"; + }; + }; + + i2c1_pmx: i2c1@0 { + i2c1 { + groups = "i2c1_grp"; + function = "i2c1"; + }; + }; + + jtag_pmx0: jtag@0 { + jtag_0 { + groups = "jtag_grp0"; + function = "jtag_m0"; + }; + }; + + ks_kas_spi_pmx0: ks_kas_spi@0 { + ks_kas_spi_0 { + groups = "ks_kas_spi_grp0"; + function = "ks_kas_spi_m0"; + }; + }; + + ld_ldd_pmx: ld_ldd@0 { + ld_ldd { + groups = "ld_ldd_grp"; + function = "ld_ldd"; + }; + }; + + ld_ldd_16bit_pmx: ld_ldd_16bit@0 { + ld_ldd_16bit { + groups = "ld_ldd_16bit_grp"; + function = "ld_ldd_16bit"; + }; + }; + + ld_ldd_fck_pmx: ld_ldd_fck@0 { + ld_ldd_fck { + groups = "ld_ldd_fck_grp"; + function = "ld_ldd_fck"; + }; + }; + + ld_ldd_lck_pmx: ld_ldd_lck@0 { + ld_ldd_lck { + groups = "ld_ldd_lck_grp"; + function = "ld_ldd_lck"; + }; + }; + + lr_lcdrom_pmx: lr_lcdrom@0 { + lr_lcdrom { + groups = "lr_lcdrom_grp"; + function = "lr_lcdrom"; + }; + }; + + lvds_analog_pmx: lvds_analog@0 { + lvds_analog { + groups = "lvds_analog_grp"; + function = "lvds_analog"; + }; + }; + + nd_df_pmx: nd_df@0 { + nd_df { + groups = "nd_df_grp"; + function = "nd_df"; + }; + }; + + nd_df_nowp_pmx: nd_df_nowp@0 { + nd_df_nowp { + groups = "nd_df_nowp_grp"; + function = "nd_df_nowp"; + }; + }; + + ps_pmx: ps@0 { + ps { + groups = "ps_grp"; + function = "ps"; + }; + }; + + pwc_core_on_pmx: pwc_core_on@0 { + pwc_core_on { + groups = "pwc_core_on_grp"; + function = "pwc_core_on"; + }; + }; + + pwc_ext_on_pmx: pwc_ext_on@0 { + pwc_ext_on { + groups = "pwc_ext_on_grp"; + function = "pwc_ext_on"; + }; + }; + + pwc_gpio3_clk_pmx: pwc_gpio3_clk@0 { + pwc_gpio3_clk { + groups = "pwc_gpio3_clk_grp"; + function = "pwc_gpio3_clk"; + }; + }; + + pwc_io_on_pmx: pwc_io_on@0 { + pwc_io_on { + groups = "pwc_io_on_grp"; + function = "pwc_io_on"; + }; + }; + + pwc_lowbatt_b_pmx0: pwc_lowbatt_b@0 { + pwc_lowbatt_b_0 { + groups = "pwc_lowbatt_b_grp0"; + function = "pwc_lowbatt_b_m0"; + }; + }; + + pwc_mem_on_pmx: pwc_mem_on@0 { + pwc_mem_on { + groups = "pwc_mem_on_grp"; + function = "pwc_mem_on"; + }; + }; + + pwc_on_key_b_pmx0: pwc_on_key_b@0 { + pwc_on_key_b_0 { + groups = "pwc_on_key_b_grp0"; + function = "pwc_on_key_b_m0"; + }; + }; + + pwc_wakeup_src0_pmx: pwc_wakeup_src0@0 { + pwc_wakeup_src0 { + groups = "pwc_wakeup_src0_grp"; + function = "pwc_wakeup_src0"; + }; + }; + + pwc_wakeup_src1_pmx: pwc_wakeup_src1@0 { + pwc_wakeup_src1 { + groups = "pwc_wakeup_src1_grp"; + function = "pwc_wakeup_src1"; + }; + }; + + pwc_wakeup_src2_pmx: pwc_wakeup_src2@0 { + pwc_wakeup_src2 { + groups = "pwc_wakeup_src2_grp"; + function = "pwc_wakeup_src2"; + }; + }; + + pwc_wakeup_src3_pmx: pwc_wakeup_src3@0 { + pwc_wakeup_src3 { + groups = "pwc_wakeup_src3_grp"; + function = "pwc_wakeup_src3"; + }; + }; + + pw_cko0_pmx0: pw_cko0@0 { + pw_cko0_0 { + groups = "pw_cko0_grp0"; + function = "pw_cko0_m0"; + }; + }; + + pw_cko0_pmx1: pw_cko0@1 { + pw_cko0_1 { + groups = "pw_cko0_grp1"; + function = "pw_cko0_m1"; + }; + }; + + pw_cko0_pmx2: pw_cko0@2 { + pw_cko0_2 { + groups = "pw_cko0_grp2"; + function = "pw_cko0_m2"; + }; + }; + + pw_cko1_pmx0: pw_cko1@0 { + pw_cko1_0 { + groups = "pw_cko1_grp0"; + function = "pw_cko1_m0"; + }; + }; + + pw_cko1_pmx1: pw_cko1@1 { + pw_cko1_1 { + groups = "pw_cko1_grp1"; + function = "pw_cko1_m1"; + }; + }; + + pw_i2s01_clk_pmx0: pw_i2s01_clk@0 { + pw_i2s01_clk_0 { + groups = "pw_i2s01_clk_grp0"; + function = "pw_i2s01_clk_m0"; + }; + }; + + pw_i2s01_clk_pmx1: pw_i2s01_clk@1 { + pw_i2s01_clk_1 { + groups = "pw_i2s01_clk_grp1"; + function = "pw_i2s01_clk_m1"; + }; + }; + + pw_pwm0_pmx: pw_pwm0@0 { + pw_pwm0 { + groups = "pw_pwm0_grp"; + function = "pw_pwm0"; + }; + }; + + pw_pwm1_pmx: pw_pwm1@0 { + pw_pwm1 { + groups = "pw_pwm1_grp"; + function = "pw_pwm1"; + }; + }; + + pw_pwm2_pmx0: pw_pwm2@0 { + pw_pwm2_0 { + groups = "pw_pwm2_grp0"; + function = "pw_pwm2_m0"; + }; + }; + + pw_pwm2_pmx1: pw_pwm2@1 { + pw_pwm2_1 { + groups = "pw_pwm2_grp1"; + function = "pw_pwm2_m1"; + }; + }; + + pw_pwm3_pmx0: pw_pwm3@0 { + pw_pwm3_0 { + groups = "pw_pwm3_grp0"; + function = "pw_pwm3_m0"; + }; + }; + + pw_pwm3_pmx1: pw_pwm3@1 { + pw_pwm3_1 { + groups = "pw_pwm3_grp1"; + function = "pw_pwm3_m1"; + }; + }; + + pw_pwm_cpu_vol_pmx0: pw_pwm_cpu_vol@0 { + pw_pwm_cpu_vol_0 { + groups = "pw_pwm_cpu_vol_grp0"; + function = "pw_pwm_cpu_vol_m0"; + }; + }; + + pw_pwm_cpu_vol_pmx1: pw_pwm_cpu_vol@1 { + pw_pwm_cpu_vol_1 { + groups = "pw_pwm_cpu_vol_grp1"; + function = "pw_pwm_cpu_vol_m1"; + }; + }; + + pw_backlight_pmx0: pw_backlight@0 { + pw_backlight_0 { + groups = "pw_backlight_grp0"; + function = "pw_backlight_m0"; + }; + }; + + pw_backlight_pmx1: pw_backlight@1 { + pw_backlight_1 { + groups = "pw_backlight_grp1"; + function = "pw_backlight_m1"; + }; + }; + + rg_eth_mac_pmx: rg_eth_mac@0 { + rg_eth_mac { + groups = "rg_eth_mac_grp"; + function = "rg_eth_mac"; + }; + }; + + rg_gmac_phy_intr_n_pmx: rg_gmac_phy_intr_n@0 { + rg_gmac_phy_intr_n { + groups = "rg_gmac_phy_intr_n_grp"; + function = "rg_gmac_phy_intr_n"; + }; + }; + + rg_rgmii_mac_pmx: rg_rgmii_mac@0 { + rg_rgmii_mac { + groups = "rg_rgmii_mac_grp"; + function = "rg_rgmii_mac"; + }; + }; + + rg_rgmii_phy_ref_clk_pmx0: rg_rgmii_phy_ref_clk@0 { + rg_rgmii_phy_ref_clk_0 { + groups = + "rg_rgmii_phy_ref_clk_grp0"; + function = + "rg_rgmii_phy_ref_clk_m0"; + }; + }; + + rg_rgmii_phy_ref_clk_pmx1: rg_rgmii_phy_ref_clk@1 { + rg_rgmii_phy_ref_clk_1 { + groups = + "rg_rgmii_phy_ref_clk_grp1"; + function = + "rg_rgmii_phy_ref_clk_m1"; + }; + }; + + sd0_pmx: sd0@0 { + sd0 { + groups = "sd0_grp"; + function = "sd0"; + }; + }; + + sd0_4bit_pmx: sd0_4bit@0 { + sd0_4bit { + groups = "sd0_4bit_grp"; + function = "sd0_4bit"; + }; + }; + + sd1_pmx: sd1@0 { + sd1 { + groups = "sd1_grp"; + function = "sd1"; + }; + }; + + sd1_4bit_pmx0: sd1_4bit@0 { + sd1_4bit_0 { + groups = "sd1_4bit_grp0"; + function = "sd1_4bit_m0"; + }; + }; + + sd1_4bit_pmx1: sd1_4bit@1 { + sd1_4bit_1 { + groups = "sd1_4bit_grp1"; + function = "sd1_4bit_m1"; + }; + }; + + sd2_pmx0: sd2@0 { + sd2_0 { + groups = "sd2_grp0"; + function = "sd2_m0"; + }; + }; + + sd2_no_cdb_pmx0: sd2_no_cdb@0 { + sd2_no_cdb_0 { + groups = "sd2_no_cdb_grp0"; + function = "sd2_no_cdb_m0"; + }; + }; + + sd3_pmx: sd3@0 { + sd3 { + groups = "sd3_grp"; + function = "sd3"; + }; + }; + + sd5_pmx: sd5@0 { + sd5 { + groups = "sd5_grp"; + function = "sd5"; + }; + }; + + sd6_pmx0: sd6@0 { + sd6_0 { + groups = "sd6_grp0"; + function = "sd6_m0"; + }; + }; + + sd6_pmx1: sd6@1 { + sd6_1 { + groups = "sd6_grp1"; + function = "sd6_m1"; + }; + }; + + sp0_ext_ldo_on_pmx: sp0_ext_ldo_on@0 { + sp0_ext_ldo_on { + groups = "sp0_ext_ldo_on_grp"; + function = "sp0_ext_ldo_on"; + }; + }; + + sp0_qspi_pmx: sp0_qspi@0 { + sp0_qspi { + groups = "sp0_qspi_grp"; + function = "sp0_qspi"; + }; + }; + + sp1_spi_pmx: sp1_spi@0 { + sp1_spi { + groups = "sp1_spi_grp"; + function = "sp1_spi"; + }; + }; + + tpiu_trace_pmx: tpiu_trace@0 { + tpiu_trace { + groups = "tpiu_trace_grp"; + function = "tpiu_trace"; + }; + }; + + uart0_pmx: uart0@0 { + uart0 { + groups = "uart0_grp"; + function = "uart0"; + }; + }; + + uart0_nopause_pmx: uart0_nopause@0 { + uart0_nopause { + groups = "uart0_nopause_grp"; + function = "uart0_nopause"; + }; + }; + + uart1_pmx: uart1@0 { + uart1 { + groups = "uart1_grp"; + function = "uart1"; + }; + }; + + uart2_pmx: uart2@0 { + uart2 { + groups = "uart2_grp"; + function = "uart2"; + }; + }; + + uart3_pmx0: uart3@0 { + uart3_0 { + groups = "uart3_grp0"; + function = "uart3_m0"; + }; + }; + + uart3_pmx1: uart3@1 { + uart3_1 { + groups = "uart3_grp1"; + function = "uart3_m1"; + }; + }; + + uart3_pmx2: uart3@2 { + uart3_2 { + groups = "uart3_grp2"; + function = "uart3_m2"; + }; + }; + + uart3_pmx3: uart3@3 { + uart3_3 { + groups = "uart3_grp3"; + function = "uart3_m3"; + }; + }; + + uart3_nopause_pmx0: uart3_nopause@0 { + uart3_nopause_0 { + groups = "uart3_nopause_grp0"; + function = "uart3_nopause_m0"; + }; + }; + + uart3_nopause_pmx1: uart3_nopause@1 { + uart3_nopause_1 { + groups = "uart3_nopause_grp1"; + function = "uart3_nopause_m1"; + }; + }; + + uart4_pmx0: uart4@0 { + uart4_0 { + groups = "uart4_grp0"; + function = "uart4_m0"; + }; + }; + + uart4_pmx1: uart4@1 { + uart4_1 { + groups = "uart4_grp1"; + function = "uart4_m1"; + }; + }; + + uart4_pmx2: uart4@2 { + uart4_2 { + groups = "uart4_grp2"; + function = "uart4_m2"; + }; + }; + + uart4_nopause_pmx: uart4_nopause@0 { + uart4_nopause { + groups = "uart4_nopause_grp"; + function = "uart4_nopause"; + }; + }; + + usb0_drvvbus_pmx: usb0_drvvbus@0 { + usb0_drvvbus { + groups = "usb0_drvvbus_grp"; + function = "usb0_drvvbus"; + }; + }; + + usb1_drvvbus_pmx: usb1_drvvbus@0 { + usb1_drvvbus { + groups = "usb1_drvvbus_grp"; + function = "usb1_drvvbus"; + }; + }; + + visbus_dout_pmx: visbus_dout@0 { + visbus_dout { + groups = "visbus_dout_grp"; + function = "visbus_dout"; + }; + }; + + vi_vip1_pmx: vi_vip1@0 { + vi_vip1 { + groups = "vi_vip1_grp"; + function = "vi_vip1"; + }; + }; + + vi_vip1_ext_pmx: vi_vip1_ext@0 { + vi_vip1_ext { + groups = "vi_vip1_ext_grp"; + function = "vi_vip1_ext"; + }; + }; + + vi_vip1_low8bit_pmx: vi_vip1_low8bit@0 { + vi_vip1_low8bit { + groups = "vi_vip1_low8bit_grp"; + function = "vi_vip1_low8bit"; + }; + }; + + vi_vip1_high8bit_pmx: vi_vip1_high8bit@0 { + vi_vip1_high8bit { + groups = "vi_vip1_high8bit_grp"; + function = "vi_vip1_high8bit"; + }; + }; }; pmipc { @@ -341,6 +1375,12 @@ clock-names = "gpio0_io"; gpio-controller; interrupt-controller; + + gpio-banks = <2>; + gpio-ranges = <&pinctrl 0 0 0>, + <&pinctrl 32 0 0>; + gpio-ranges-group-names = "lvds_gpio_grp", + "uart_nand_gpio_grp"; }; nand@17050000 { @@ -446,11 +1486,22 @@ #interrupt-cells = <2>; compatible = "sirf,atlas7-gpio"; reg = <0x13300000 0x1000>; - interrupts = <0 43 0>, <0 44 0>, <0 45 0>; + interrupts = <0 43 0>, <0 44 0>, + <0 45 0>, <0 46 0>; clocks = <&car 84>; clock-names = "gpio1_io"; gpio-controller; interrupt-controller; + + gpio-banks = <4>; + gpio-ranges = <&pinctrl 0 0 0>, + <&pinctrl 32 0 0>, + <&pinctrl 64 0 0>, + <&pinctrl 96 0 0>; + gpio-ranges-group-names = "gnss_gpio_grp", + "lcd_vip_gpio_grp", + "sdio_i2s_gpio_grp", + "sp_rgmii_gpio_grp"; }; sd2: sdhci@14200000 { @@ -729,6 +1780,10 @@ interrupts = <0 47 0>; gpio-controller; interrupt-controller; + + gpio-banks = <1>; + gpio-ranges = <&pinctrl 0 0 0>; + gpio-ranges-group-names = "rtc_gpio_grp"; }; rtc-iobg@18840000 { diff --git a/arch/arm/boot/dts/axp209.dtsi b/arch/arm/boot/dts/axp209.dtsi index c20cf537f..24c935c72 100644 --- a/arch/arm/boot/dts/axp209.dtsi +++ b/arch/arm/boot/dts/axp209.dtsi @@ -18,11 +18,6 @@ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * You should have received a copy of the GNU General Public - * License along with this file; if not, write to the Free - * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, - * MA 02110-1301 USA - * * Or, alternatively, * * b) Permission is hereby granted, free of charge, to any person diff --git a/arch/arm/boot/dts/bcm-cygnus.dtsi b/arch/arm/boot/dts/bcm-cygnus.dtsi index 7b52c33ea..e1ac07a16 100644 --- a/arch/arm/boot/dts/bcm-cygnus.dtsi +++ b/arch/arm/boot/dts/bcm-cygnus.dtsi @@ -212,6 +212,18 @@ status = "disabled"; }; + nand: nand@18046000 { + compatible = "brcm,nand-iproc", "brcm,brcmnand-v6.1", "brcm,brcmnand"; + reg = <0x18046000 0x600>, <0xf8105408 0x600>, <0x18046f00 0x20>; + reg-names = "nand", "iproc-idm", "iproc-ext"; + interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>; + + #address-cells = <1>; + #size-cells = <0>; + + brcm,nand-has-wp; + }; + gic: interrupt-controller@19021000 { compatible = "arm,cortex-a9-gic"; #interrupt-cells = <3>; diff --git a/arch/arm/boot/dts/bcm2835-rpi-b-plus.dts b/arch/arm/boot/dts/bcm2835-rpi-b-plus.dts index e47951509..668442b1b 100644 --- a/arch/arm/boot/dts/bcm2835-rpi-b-plus.dts +++ b/arch/arm/boot/dts/bcm2835-rpi-b-plus.dts @@ -1,5 +1,5 @@ /dts-v1/; -/include/ "bcm2835-rpi.dtsi" +#include "bcm2835-rpi.dtsi" / { compatible = "raspberrypi,model-b-plus", "brcm,bcm2835"; @@ -25,6 +25,6 @@ /* I2S interface */ i2s_alt0: i2s_alt0 { brcm,pins = <18 19 20 21>; - brcm,function = <4>; /* alt0 */ + brcm,function = <BCM2835_FSEL_ALT0>; }; }; diff --git a/arch/arm/boot/dts/bcm2835-rpi-b.dts b/arch/arm/boot/dts/bcm2835-rpi-b.dts index bafa46fc2..ee89b7942 100644 --- a/arch/arm/boot/dts/bcm2835-rpi-b.dts +++ b/arch/arm/boot/dts/bcm2835-rpi-b.dts @@ -1,5 +1,5 @@ /dts-v1/; -/include/ "bcm2835-rpi.dtsi" +#include "bcm2835-rpi.dtsi" / { compatible = "raspberrypi,model-b", "brcm,bcm2835"; @@ -18,6 +18,6 @@ /* I2S interface */ i2s_alt2: i2s_alt2 { brcm,pins = <28 29 30 31>; - brcm,function = <6>; /* alt2 */ + brcm,function = <BCM2835_FSEL_ALT2>; }; }; diff --git a/arch/arm/boot/dts/bcm2835-rpi.dtsi b/arch/arm/boot/dts/bcm2835-rpi.dtsi index c70644870..46780bb48 100644 --- a/arch/arm/boot/dts/bcm2835-rpi.dtsi +++ b/arch/arm/boot/dts/bcm2835-rpi.dtsi @@ -1,4 +1,4 @@ -/include/ "bcm2835.dtsi" +#include "bcm2835.dtsi" / { memory { @@ -21,17 +21,17 @@ gpioout: gpioout { brcm,pins = <6>; - brcm,function = <1>; /* GPIO out */ + brcm,function = <BCM2835_FSEL_GPIO_OUT>; }; alt0: alt0 { brcm,pins = <0 1 2 3 4 5 7 8 9 10 11 14 15 40 45>; - brcm,function = <4>; /* alt0 */ + brcm,function = <BCM2835_FSEL_ALT0>; }; alt3: alt3 { brcm,pins = <48 49 50 51 52 53>; - brcm,function = <7>; /* alt3 */ + brcm,function = <BCM2835_FSEL_ALT3>; }; }; diff --git a/arch/arm/boot/dts/bcm2835.dtsi b/arch/arm/boot/dts/bcm2835.dtsi index 3342cb140..301c73f4c 100644 --- a/arch/arm/boot/dts/bcm2835.dtsi +++ b/arch/arm/boot/dts/bcm2835.dtsi @@ -1,4 +1,5 @@ -/include/ "skeleton.dtsi" +#include <dt-bindings/pinctrl/bcm2835.h> +#include "skeleton.dtsi" / { compatible = "brcm,bcm2835"; @@ -14,6 +15,7 @@ #address-cells = <1>; #size-cells = <1>; ranges = <0x7e000000 0x20000000 0x02000000>; + dma-ranges = <0x40000000 0x00000000 0x20000000>; timer@7e003000 { compatible = "brcm,bcm2835-system-timer"; @@ -60,6 +62,13 @@ reg = <0x7e104000 0x10>; }; + mailbox: mailbox@7e00b800 { + compatible = "brcm,bcm2835-mbox"; + reg = <0x7e00b880 0x40>; + interrupts = <0 1>; + #mbox-cells = <0>; + }; + gpio: gpio@7e200000 { compatible = "brcm,bcm2835-gpio"; reg = <0x7e200000 0xb4>; @@ -112,7 +121,7 @@ status = "disabled"; }; - i2c0: i2c@20205000 { + i2c0: i2c@7e205000 { compatible = "brcm,bcm2835-i2c"; reg = <0x7e205000 0x1000>; interrupts = <2 21>; diff --git a/arch/arm/boot/dts/bcm4708-asus-rt-ac56u.dts b/arch/arm/boot/dts/bcm4708-asus-rt-ac56u.dts new file mode 100644 index 000000000..112a5a834 --- /dev/null +++ b/arch/arm/boot/dts/bcm4708-asus-rt-ac56u.dts @@ -0,0 +1,97 @@ +/* + * Broadcom BCM470X / BCM5301X ARM platform code. + * DTS for Asus RT-AC56U + * + * Copyright (C) 2015 RafaÅ‚ MiÅ‚ecki <zajec5@gmail.com> + * + * Licensed under the GNU/GPL. See COPYING for details. + */ + +/dts-v1/; + +#include "bcm4708.dtsi" +#include "bcm5301x-nand-cs0-bch8.dtsi" + +/ { + compatible = "asus,rt-ac56u", "brcm,bcm4708"; + model = "Asus RT-AC56U (BCM4708)"; + + chosen { + bootargs = "console=ttyS0,115200"; + }; + + memory { + reg = <0x00000000 0x08000000>; + }; + + leds { + compatible = "gpio-leds"; + + usb3 { + label = "bcm53xx:blue:usb3"; + gpios = <&chipcommon 0 GPIO_ACTIVE_LOW>; + linux,default-trigger = "default-off"; + }; + + wan { + label = "bcm53xx:blue:wan"; + gpios = <&chipcommon 1 GPIO_ACTIVE_LOW>; + linux,default-trigger = "default-off"; + }; + + lan { + label = "bcm53xx:blue:lan"; + gpios = <&chipcommon 2 GPIO_ACTIVE_LOW>; + linux,default-trigger = "default-off"; + }; + + power { + label = "bcm53xx:blue:power"; + gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>; + linux,default-trigger = "default-on"; + }; + + all { + label = "bcm53xx:blue:all"; + gpios = <&chipcommon 4 GPIO_ACTIVE_LOW>; + linux,default-trigger = "default-on"; + }; + + 2ghz { + label = "bcm53xx:blue:2ghz"; + gpios = <&chipcommon 6 GPIO_ACTIVE_LOW>; + linux,default-trigger = "default-off"; + }; + + + usb2 { + label = "bcm53xx:blue:usb2"; + gpios = <&chipcommon 14 GPIO_ACTIVE_LOW>; + linux,default-trigger = "default-off"; + }; + }; + + gpio-keys { + compatible = "gpio-keys"; + #address-cells = <1>; + #size-cells = <0>; + + rfkill { + label = "WiFi"; + linux,code = <KEY_RFKILL>; + gpios = <&chipcommon 7 GPIO_ACTIVE_LOW>; + }; + + restart { + label = "Reset"; + linux,code = <KEY_RESTART>; + gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>; + }; + + wps { + label = "WPS"; + linux,code = <KEY_WPS_BUTTON>; + gpios = <&chipcommon 15 GPIO_ACTIVE_LOW>; + }; + }; +}; diff --git a/arch/arm/boot/dts/bcm4708-asus-rt-ac68u.dts b/arch/arm/boot/dts/bcm4708-asus-rt-ac68u.dts new file mode 100644 index 000000000..3600f56f4 --- /dev/null +++ b/arch/arm/boot/dts/bcm4708-asus-rt-ac68u.dts @@ -0,0 +1,84 @@ +/* + * Broadcom BCM470X / BCM5301X ARM platform code. + * DTS for Asus RT-AC68U + * + * Copyright (C) 2015 RafaÅ‚ MiÅ‚ecki <zajec5@gmail.com> + * + * Licensed under the GNU/GPL. See COPYING for details. + */ + +/dts-v1/; + +#include "bcm4708.dtsi" +#include "bcm5301x-nand-cs0-bch8.dtsi" + +/ { + compatible = "asus,rt-ac68u", "brcm,bcm4708"; + model = "Asus RT-AC68U (BCM4708)"; + + chosen { + bootargs = "console=ttyS0,115200"; + }; + + memory { + reg = <0x00000000 0x08000000>; + }; + + leds { + compatible = "gpio-leds"; + + usb2 { + label = "bcm53xx:blue:usb2"; + gpios = <&chipcommon 0 GPIO_ACTIVE_LOW>; + linux,default-trigger = "default-off"; + }; + + power { + label = "bcm53xx:blue:power"; + gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>; + linux,default-trigger = "default-on"; + }; + + logo { + label = "bcm53xx:white:logo"; + gpios = <&chipcommon 4 GPIO_ACTIVE_LOW>; + linux,default-trigger = "default-on"; + }; + + usb3 { + label = "bcm53xx:blue:usb3"; + gpios = <&chipcommon 14 GPIO_ACTIVE_LOW>; + linux,default-trigger = "default-off"; + }; + }; + + gpio-keys { + compatible = "gpio-keys"; + #address-cells = <1>; + #size-cells = <0>; + + brightness { + label = "Backlight"; + linux,code = <KEY_BRIGHTNESS_ZERO>; + gpios = <&chipcommon 5 GPIO_ACTIVE_LOW>; + }; + + wps { + label = "WPS"; + linux,code = <KEY_WPS_BUTTON>; + gpios = <&chipcommon 7 GPIO_ACTIVE_LOW>; + }; + + restart { + label = "Reset"; + linux,code = <KEY_RESTART>; + gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>; + }; + + rfkill { + label = "WiFi"; + linux,code = <KEY_RFKILL>; + gpios = <&chipcommon 15 GPIO_ACTIVE_LOW>; + }; + }; +}; diff --git a/arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts b/arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts index b359c1e61..24f0ab59b 100644 --- a/arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts +++ b/arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts @@ -10,6 +10,7 @@ /dts-v1/; #include "bcm4708.dtsi" +#include "bcm5301x-nand-cs0-bch8.dtsi" / { compatible = "buffalo,wzr-1750dhp", "brcm,bcm4708"; @@ -47,6 +48,12 @@ leds { compatible = "gpio-leds"; + usb { + label = "bcm53xx:blue:usb"; + gpios = <&hc595 0 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "default-off"; + }; + power0 { label = "bcm53xx:red:power"; gpios = <&hc595 1 GPIO_ACTIVE_HIGH>; diff --git a/arch/arm/boot/dts/bcm4708-luxul-xwc-1000.dts b/arch/arm/boot/dts/bcm4708-luxul-xwc-1000.dts index 946c728c4..f03939311 100644 --- a/arch/arm/boot/dts/bcm4708-luxul-xwc-1000.dts +++ b/arch/arm/boot/dts/bcm4708-luxul-xwc-1000.dts @@ -10,6 +10,7 @@ /dts-v1/; #include "bcm4708.dtsi" +#include "bcm5301x-nand-cs0-bch8.dtsi" / { compatible = "luxul,xwc-1000", "brcm,bcm4708"; @@ -23,12 +24,8 @@ reg = <0x00000000 0x08000000>; }; - axi@18000000 { - nand@28000 { - reg = <0x00028000 0x1000>; - #address-cells = <1>; - #size-cells = <1>; - + nand: nand@18028000 { + nandcs@0 { partition@0 { label = "ubi"; reg = <0x00000000 0x08000000>; diff --git a/arch/arm/boot/dts/bcm4708-netgear-r6250.dts b/arch/arm/boot/dts/bcm4708-netgear-r6250.dts index 2ed9e5794..326ce8f4e 100644 --- a/arch/arm/boot/dts/bcm4708-netgear-r6250.dts +++ b/arch/arm/boot/dts/bcm4708-netgear-r6250.dts @@ -10,6 +10,7 @@ /dts-v1/; #include "bcm4708.dtsi" +#include "bcm5301x-nand-cs0-bch8.dtsi" / { compatible = "netgear,r6250v1", "brcm,bcm4708"; diff --git a/arch/arm/boot/dts/bcm4708-netgear-r6300-v2.dts b/arch/arm/boot/dts/bcm4708-netgear-r6300-v2.dts index 399104282..3a94606d0 100644 --- a/arch/arm/boot/dts/bcm4708-netgear-r6300-v2.dts +++ b/arch/arm/boot/dts/bcm4708-netgear-r6300-v2.dts @@ -10,6 +10,7 @@ /dts-v1/; #include "bcm4708.dtsi" +#include "bcm5301x-nand-cs0-bch8.dtsi" / { compatible = "netgear,r6300v2", "brcm,bcm4708"; diff --git a/arch/arm/boot/dts/bcm4708-smartrg-sr400ac.dts b/arch/arm/boot/dts/bcm4708-smartrg-sr400ac.dts new file mode 100644 index 000000000..d6a033b97 --- /dev/null +++ b/arch/arm/boot/dts/bcm4708-smartrg-sr400ac.dts @@ -0,0 +1,120 @@ +/* + * Broadcom BCM470X / BCM5301X arm platform code. + * DTS for SmartRG SR400ac + * + * Copyright (C) 2015 RafaÅ‚ MiÅ‚ecki <zajec5@gmail.com> + * + * Licensed under the GNU/GPL. See COPYING for details. + */ + +/dts-v1/; + +#include "bcm4708.dtsi" +#include "bcm5301x-nand-cs0-bch8.dtsi" + +/ { + compatible = "smartrg,sr400ac", "brcm,bcm4708"; + model = "SmartRG SR400ac"; + + chosen { + bootargs = "console=ttyS0,115200"; + }; + + memory { + reg = <0x00000000 0x08000000>; + }; + + leds { + compatible = "gpio-leds"; + + power-white { + label = "bcm53xx:white:power"; + gpios = <&chipcommon 1 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "default-on"; + }; + + power-amber { + label = "bcm53xx:amber:power"; + gpios = <&chipcommon 2 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "default-off"; + }; + + usb2 { + label = "bcm53xx:white:usb2"; + gpios = <&chipcommon 3 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "default-off"; + }; + + usb3-white { + label = "bcm53xx:white:usb3"; + gpios = <&chipcommon 4 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "default-off"; + }; + + usb3-green { + label = "bcm53xx:green:usb3"; + gpios = <&chipcommon 5 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "default-off"; + }; + + wps { + label = "bcm53xx:white:wps"; + gpios = <&chipcommon 6 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "default-off"; + }; + + status-red { + label = "bcm53xx:red:status"; + gpios = <&chipcommon 8 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "default-off"; + }; + + status-green { + label = "bcm53xx:green:status"; + gpios = <&chipcommon 9 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "default-off"; + }; + + status-blue { + label = "bcm53xx:blue:status"; + gpios = <&chipcommon 10 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "default-off"; + }; + + wan-white { + label = "bcm53xx:white:wan"; + gpios = <&chipcommon 12 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "default-off"; + }; + + wan-red { + label = "bcm53xx:red:wan"; + gpios = <&chipcommon 13 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "default-off"; + }; + }; + + gpio-keys { + compatible = "gpio-keys"; + #address-cells = <1>; + #size-cells = <0>; + + rfkill { + label = "WiFi"; + linux,code = <KEY_RFKILL>; + gpios = <&chipcommon 0 GPIO_ACTIVE_LOW>; + }; + + wps { + label = "WPS"; + linux,code = <KEY_WPS_BUTTON>; + gpios = <&chipcommon 7 GPIO_ACTIVE_LOW>; + }; + + restart { + label = "Reset"; + linux,code = <KEY_RESTART>; + gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>; + }; + }; +}; diff --git a/arch/arm/boot/dts/bcm47081-asus-rt-n18u.dts b/arch/arm/boot/dts/bcm47081-asus-rt-n18u.dts index 0ee85ea10..71b98cfaf 100644 --- a/arch/arm/boot/dts/bcm47081-asus-rt-n18u.dts +++ b/arch/arm/boot/dts/bcm47081-asus-rt-n18u.dts @@ -10,6 +10,7 @@ /dts-v1/; #include "bcm47081.dtsi" +#include "bcm5301x-nand-cs0-bch8.dtsi" / { compatible = "asus,rt-n18u", "brcm,bcm47081", "brcm,bcm4708"; diff --git a/arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts b/arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts index db9131e03..bb0cb0bfa 100644 --- a/arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts +++ b/arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts @@ -10,6 +10,7 @@ /dts-v1/; #include "bcm47081.dtsi" +#include "bcm5301x-nand-cs0-bch8.dtsi" / { compatible = "buffalo,wzr-600dhp2", "brcm,bcm47081", "brcm,bcm4708"; diff --git a/arch/arm/boot/dts/bcm47081-buffalo-wzr-900dhp.dts b/arch/arm/boot/dts/bcm47081-buffalo-wzr-900dhp.dts index 7d6868acb..184fd9214 100644 --- a/arch/arm/boot/dts/bcm47081-buffalo-wzr-900dhp.dts +++ b/arch/arm/boot/dts/bcm47081-buffalo-wzr-900dhp.dts @@ -10,6 +10,7 @@ /dts-v1/; #include "bcm47081.dtsi" +#include "bcm5301x-nand-cs0-bch8.dtsi" / { compatible = "buffalo,wzr-900dhp", "brcm,bcm47081", "brcm,bcm4708"; diff --git a/arch/arm/boot/dts/bcm4709-asus-rt-ac87u.dts b/arch/arm/boot/dts/bcm4709-asus-rt-ac87u.dts new file mode 100644 index 000000000..aedf3c426 --- /dev/null +++ b/arch/arm/boot/dts/bcm4709-asus-rt-ac87u.dts @@ -0,0 +1,65 @@ +/* + * Broadcom BCM470X / BCM5301X ARM platform code. + * DTS for Asus RT-AC87U + * + * Copyright (C) 2015 RafaÅ‚ MiÅ‚ecki <zajec5@gmail.com> + * + * Licensed under the GNU/GPL. See COPYING for details. + */ + +/dts-v1/; + +#include "bcm4708.dtsi" + +/ { + compatible = "asus,rt-ac87u", "brcm,bcm4709", "brcm,bcm4708"; + model = "Asus RT-AC87U"; + + chosen { + bootargs = "console=ttyS0,115200"; + }; + + memory { + reg = <0x00000000 0x08000000>; + }; + + leds { + compatible = "gpio-leds"; + + wps { + label = "bcm53xx:blue:wps"; + gpios = <&chipcommon 1 GPIO_ACTIVE_LOW>; + linux,default-trigger = "default-off"; + }; + + power { + label = "bcm53xx:blue:power"; + gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>; + linux,default-trigger = "default-on"; + }; + + wan { + label = "bcm53xx:red:wan"; + gpios = <&chipcommon 5 GPIO_ACTIVE_LOW>; + linux,default-trigger = "default-off"; + }; + }; + + gpio-keys { + compatible = "gpio-keys"; + #address-cells = <1>; + #size-cells = <0>; + + wps { + label = "WPS"; + linux,code = <KEY_WPS_BUTTON>; + gpios = <&chipcommon 2 GPIO_ACTIVE_LOW>; + }; + + restart { + label = "Reset"; + linux,code = <KEY_RESTART>; + gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>; + }; + }; +}; diff --git a/arch/arm/boot/dts/bcm4709-buffalo-wxr-1900dhp.dts b/arch/arm/boot/dts/bcm4709-buffalo-wxr-1900dhp.dts new file mode 100644 index 000000000..2a92e8d5a --- /dev/null +++ b/arch/arm/boot/dts/bcm4709-buffalo-wxr-1900dhp.dts @@ -0,0 +1,128 @@ +/* + * Broadcom BCM470X / BCM5301X ARM platform code. + * DTS for Buffalo WXR-1900DHP + * + * Copyright (C) 2015 Felix Fietkau <nbd@openwrt.org> + * + * Licensed under the GNU/GPL. See COPYING for details. + */ + +/dts-v1/; + +#include "bcm4708.dtsi" +#include "bcm5301x-nand-cs0-bch8.dtsi" + +/ { + compatible = "buffalo,wxr-1900dhp", "brcm,bcm4709", "brcm,bcm4708"; + model = "Buffalo WXR-1900DHP"; + + chosen { + bootargs = "console=ttyS0,115200"; + }; + + memory { + reg = <0x00000000 0x08000000>; + }; + + leds { + compatible = "gpio-leds"; + + usb { + label = "bcm53xx:green:usb"; + gpios = <&chipcommon 4 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "default-off"; + }; + + power-amber { + label = "bcm53xx:amber:power"; + gpios = <&chipcommon 5 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "default-off"; + }; + + power-white { + label = "bcm53xx:white:power"; + gpios = <&chipcommon 6 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "default-on"; + }; + + router-amber { + label = "bcm53xx:amber:router"; + gpios = <&chipcommon 7 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "default-off"; + }; + + router-white { + label = "bcm53xx:white:router"; + gpios = <&chipcommon 8 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "default-off"; + }; + + wan-amber { + label = "bcm53xx:amber:wan"; + gpios = <&chipcommon 9 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "default-off"; + }; + + wan-white { + label = "bcm53xx:white:wan"; + gpios = <&chipcommon 10 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "default-off"; + }; + + wireless-amber { + label = "bcm53xx:amber:wireless"; + gpios = <&chipcommon 11 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "default-off"; + }; + + wireless-white { + label = "bcm53xx:white:wireless"; + gpios = <&chipcommon 12 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "default-off"; + }; + }; + + gpio-keys { + compatible = "gpio-keys"; + #address-cells = <1>; + #size-cells = <0>; + + power { + label = "Power"; + linux,code = <KEY_POWER>; + gpios = <&chipcommon 1 GPIO_ACTIVE_LOW>; + }; + + restart { + label = "Reset"; + linux,code = <KEY_RESTART>; + gpios = <&chipcommon 15 GPIO_ACTIVE_LOW>; + }; + + aoss { + label = "AOSS"; + linux,code = <KEY_WPS_BUTTON>; + gpios = <&chipcommon 16 GPIO_ACTIVE_LOW>; + }; + + /* Commit mode set by switch? */ + mode { + label = "Mode"; + linux,code = <KEY_SETUP>; + gpios = <&chipcommon 17 GPIO_ACTIVE_LOW>; + }; + + /* Switch: AP mode */ + sw_ap { + label = "AP"; + linux,code = <BTN_0>; + gpios = <&chipcommon 18 GPIO_ACTIVE_LOW>; + }; + + eject { + label = "USB eject"; + linux,code = <KEY_EJECTCD>; + gpios = <&chipcommon 20 GPIO_ACTIVE_LOW>; + }; + }; +}; diff --git a/arch/arm/boot/dts/bcm4709-netgear-r8000.dts b/arch/arm/boot/dts/bcm4709-netgear-r8000.dts index ea26dd3ec..446c586cd 100644 --- a/arch/arm/boot/dts/bcm4709-netgear-r8000.dts +++ b/arch/arm/boot/dts/bcm4709-netgear-r8000.dts @@ -10,6 +10,7 @@ /dts-v1/; #include "bcm4708.dtsi" +#include "bcm5301x-nand-cs0-bch8.dtsi" / { compatible = "netgear,r8000", "brcm,bcm4709", "brcm,bcm4708"; diff --git a/arch/arm/boot/dts/bcm5301x-nand-cs0-bch8.dtsi b/arch/arm/boot/dts/bcm5301x-nand-cs0-bch8.dtsi new file mode 100644 index 000000000..d10781e36 --- /dev/null +++ b/arch/arm/boot/dts/bcm5301x-nand-cs0-bch8.dtsi @@ -0,0 +1,24 @@ +/* + * Broadcom BCM470X / BCM5301X Nand chip defaults. + * + * This should be included if the NAND controller is on chip select 0 + * and uses 8 bit ECC. + * + * Copyright (C) 2015 Hauke Mehrtens <hauke@hauke-m.de> + * + * Licensed under the GNU/GPL. See COPYING for details. + */ + +/ { + nand@18028000 { + nandcs@0 { + compatible = "brcm,nandcs"; + reg = <0>; + #address-cells = <1>; + #size-cells = <1>; + + nand-ecc-strength = <8>; + nand-ecc-step-size = <512>; + }; + }; +}; diff --git a/arch/arm/boot/dts/bcm5301x.dtsi b/arch/arm/boot/dts/bcm5301x.dtsi index 78aec6270..21fefd4cd 100644 --- a/arch/arm/boot/dts/bcm5301x.dtsi +++ b/arch/arm/boot/dts/bcm5301x.dtsi @@ -108,6 +108,30 @@ /* ChipCommon */ <0x00000000 0 &gic GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>, + /* PCIe Controller 0 */ + <0x00012000 0 &gic GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>, + <0x00012000 1 &gic GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>, + <0x00012000 2 &gic GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>, + <0x00012000 3 &gic GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>, + <0x00012000 4 &gic GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>, + <0x00012000 5 &gic GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>, + + /* PCIe Controller 1 */ + <0x00013000 0 &gic GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>, + <0x00013000 1 &gic GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>, + <0x00013000 2 &gic GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>, + <0x00013000 3 &gic GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>, + <0x00013000 4 &gic GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>, + <0x00013000 5 &gic GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>, + + /* PCIe Controller 2 */ + <0x00014000 0 &gic GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>, + <0x00014000 1 &gic GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>, + <0x00014000 2 &gic GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>, + <0x00014000 3 &gic GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>, + <0x00014000 4 &gic GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>, + <0x00014000 5 &gic GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>, + /* USB 2.0 Controller */ <0x00021000 0 &gic GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>, @@ -143,4 +167,16 @@ #gpio-cells = <2>; }; }; + + nand: nand@18028000 { + compatible = "brcm,nand-iproc", "brcm,brcmnand-v6.1", "brcm,brcmnand"; + reg = <0x18028000 0x600>, <0x1811a408 0x600>, <0x18028f00 0x20>; + reg-names = "nand", "iproc-idm", "iproc-ext"; + interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>; + + #address-cells = <1>; + #size-cells = <0>; + + brcm,nand-has-wp; + }; }; diff --git a/arch/arm/boot/dts/bcm63138.dtsi b/arch/arm/boot/dts/bcm63138.dtsi index f46329c8a..34cd64051 100644 --- a/arch/arm/boot/dts/bcm63138.dtsi +++ b/arch/arm/boot/dts/bcm63138.dtsi @@ -26,6 +26,7 @@ compatible = "arm,cortex-a9"; next-level-cache = <&L2>; reg = <0>; + enable-method = "brcm,bcm63138"; }; cpu@1 { @@ -33,6 +34,8 @@ compatible = "arm,cortex-a9"; next-level-cache = <&L2>; reg = <1>; + enable-method = "brcm,bcm63138"; + resets = <&pmb0 4 1>; }; }; @@ -105,6 +108,18 @@ reg = <0x1e620 0x20>; interrupts = <GIC_PPI 14 IRQ_TYPE_LEVEL_HIGH>; }; + + pmb0: reset-controller@4800c0 { + compatible = "brcm,bcm63138-pmb"; + reg = <0x4800c0 0x10>; + #reset-cells = <2>; + }; + + pmb1: reset-controller@4800e0 { + compatible = "brcm,bcm63138-pmb"; + reg = <0x4800e0 0x10>; + #reset-cells = <2>; + }; }; /* Legacy UBUS base */ @@ -114,6 +129,11 @@ #size-cells = <1>; ranges = <0 0xfffe8000 0x8100>; + timer: timer@80 { + compatible = "brcm,bcm6328-timer", "syscon"; + reg = <0x80 0x3c>; + }; + serial0: serial@600 { compatible = "brcm,bcm6345-uart"; reg = <0x600 0x1b>; @@ -131,5 +151,28 @@ clock-names = "periph"; status = "disabled"; }; + + nand: nand@2000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "brcm,nand-bcm63138", "brcm,brcmnand-v7.0", "brcm,brcmnand"; + reg = <0x2000 0x600>, <0xf0 0x10>; + reg-names = "nand", "nand-int-base"; + status = "disabled"; + interrupts = <GIC_SPI 38 0>; + interrupt-names = "nand"; + }; + + bootlut: bootlut@8000 { + compatible = "brcm,bcm63138-bootlut"; + reg = <0x8000 0x50>; + }; + + reboot { + compatible = "syscon-reboot"; + regmap = <&timer>; + offset = <0x34>; + mask = <1>; + }; }; }; diff --git a/arch/arm/boot/dts/bcm7445-bcm97445svmb.dts b/arch/arm/boot/dts/bcm7445-bcm97445svmb.dts index 9eec2ac11..0bb8d17e4 100644 --- a/arch/arm/boot/dts/bcm7445-bcm97445svmb.dts +++ b/arch/arm/boot/dts/bcm7445-bcm97445svmb.dts @@ -12,3 +12,26 @@ <0x00 0x80000000 0x00 0x40000000>; }; }; + +&nand { + status = "okay"; + + nandcs@1 { + compatible = "brcm,nandcs"; + reg = <1>; + nand-ecc-step-size = <512>; + nand-ecc-strength = <8>; + nand-on-flash-bbt; + + #size-cells = <2>; + #address-cells = <2>; + + flash1.rootfs0@0 { + reg = <0x0 0x0 0x0 0x80000000>; + }; + + flash1.rootfs1@80000000 { + reg = <0x0 0x80000000 0x0 0x80000000>; + }; + }; +}; diff --git a/arch/arm/boot/dts/bcm7445.dtsi b/arch/arm/boot/dts/bcm7445.dtsi index 39ac7840d..58dcd6662 100644 --- a/arch/arm/boot/dts/bcm7445.dtsi +++ b/arch/arm/boot/dts/bcm7445.dtsi @@ -108,6 +108,65 @@ brcm,int-map-mask = <0x25c>, <0x7000000>; brcm,int-fwd-mask = <0x70000>; }; + + hif_intr2_intc: interrupt-controller@3e1000 { + compatible = "brcm,l2-intc"; + reg = <0x3e1000 0x30>; + interrupt-controller; + #interrupt-cells = <1>; + interrupts = <GIC_SPI 0x20 0x0>; + interrupt-parent = <&gic>; + interrupt-names = "hif"; + }; + + nand: nand@3e2800 { + status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; + compatible = "brcm,brcmnand-v7.1", "brcm,brcmnand"; + reg-names = "nand", "flash-dma"; + reg = <0x3e2800 0x600>, <0x3e3000 0x2c>; + interrupt-parent = <&hif_intr2_intc>; + interrupts = <24>, <4>; + interrupt-names = "nand_ctlrdy", "flash_dma_done"; + }; + + sata@45a000 { + compatible = "brcm,bcm7445-ahci", "brcm,sata3-ahci"; + reg-names = "ahci", "top-ctrl"; + reg = <0x45a000 0xa9c>, <0x458040 0x24>; + interrupts = <GIC_SPI 30 0>; + #address-cells = <1>; + #size-cells = <0>; + + sata0: sata-port@0 { + reg = <0>; + phys = <&sata_phy0>; + }; + + sata1: sata-port@1 { + reg = <1>; + phys = <&sata_phy1>; + }; + }; + + sata_phy: sata-phy@458100 { + compatible = "brcm,bcm7445-sata-phy", "brcm,phy-sata3"; + reg = <0x458100 0x1f00>; + reg-names = "phy"; + #address-cells = <0x1>; + #size-cells = <0x0>; + + sata_phy0: sata-phy@0 { + reg = <0>; + #phy-cells = <0>; + }; + + sata_phy1: sata-phy@1 { + reg = <1>; + #phy-cells = <0>; + }; + }; }; smpboot { diff --git a/arch/arm/boot/dts/bcm958300k.dts b/arch/arm/boot/dts/bcm958300k.dts index c9eb8565e..2f63052f9 100644 --- a/arch/arm/boot/dts/bcm958300k.dts +++ b/arch/arm/boot/dts/bcm958300k.dts @@ -58,4 +58,20 @@ uart3: serial@18023000 { status = "okay"; }; + + nand: nand@18046000 { + nandcs@1 { + compatible = "brcm,nandcs"; + reg = <0>; + nand-on-flash-bbt; + + #address-cells = <1>; + #size-cells = <1>; + + nand-ecc-strength = <24>; + nand-ecc-step-size = <1024>; + + brcm,nand-oob-sector-size = <27>; + }; + }; }; diff --git a/arch/arm/boot/dts/bcm963138dvt.dts b/arch/arm/boot/dts/bcm963138dvt.dts index 69c93395e..370aa2cfd 100644 --- a/arch/arm/boot/dts/bcm963138dvt.dts +++ b/arch/arm/boot/dts/bcm963138dvt.dts @@ -28,3 +28,15 @@ &serial1 { status = "okay"; }; + +&nand { + status = "okay"; + + nandcs@0 { + compatible = "brcm,nandcs"; + reg = <0>; + nand-ecc-strength = <4>; + nand-ecc-step-size = <512>; + brcm,nand-oob-sectors-size = <16>; + }; +}; diff --git a/arch/arm/boot/dts/berlin2-sony-nsz-gs7.dts b/arch/arm/boot/dts/berlin2-sony-nsz-gs7.dts index 86d85d889..5c99fb3a4 100644 --- a/arch/arm/boot/dts/berlin2-sony-nsz-gs7.dts +++ b/arch/arm/boot/dts/berlin2-sony-nsz-gs7.dts @@ -3,9 +3,37 @@ * * Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; diff --git a/arch/arm/boot/dts/berlin2.dtsi b/arch/arm/boot/dts/berlin2.dtsi index 63d00a63c..ef811de09 100644 --- a/arch/arm/boot/dts/berlin2.dtsi +++ b/arch/arm/boot/dts/berlin2.dtsi @@ -6,9 +6,37 @@ * based on GPL'ed 2.6 kernel sources * (c) Marvell International Ltd. * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. */ #include "skeleton.dtsi" @@ -56,7 +84,7 @@ sdhci0: sdhci@ab0000 { compatible = "mrvl,pxav3-mmc"; reg = <0xab0000 0x200>; - clocks = <&chip CLKID_SDIO0XIN>, <&chip CLKID_SDIO0>; + clocks = <&chip_clk CLKID_SDIO0XIN>, <&chip_clk CLKID_SDIO0>; clock-names = "io", "core"; interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>; status = "disabled"; @@ -65,7 +93,7 @@ sdhci1: sdhci@ab0800 { compatible = "mrvl,pxav3-mmc"; reg = <0xab0800 0x200>; - clocks = <&chip CLKID_SDIO1XIN>, <&chip CLKID_SDIO1>; + clocks = <&chip_clk CLKID_SDIO1XIN>, <&chip_clk CLKID_SDIO1>; clock-names = "io", "core"; interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>; status = "disabled"; @@ -75,7 +103,7 @@ compatible = "mrvl,pxav3-mmc"; reg = <0xab1000 0x200>; interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&chip CLKID_NFC_ECC>, <&chip CLKID_NFC>; + clocks = <&chip_clk CLKID_NFC_ECC>, <&chip_clk CLKID_NFC>; clock-names = "io", "core"; pinctrl-0 = <&emmc_pmux>; pinctrl-names = "default"; @@ -105,13 +133,13 @@ compatible = "arm,cortex-a9-twd-timer"; reg = <0xad0600 0x20>; interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>; - clocks = <&chip CLKID_TWD>; + clocks = <&chip_clk CLKID_TWD>; }; eth1: ethernet@b90000 { compatible = "marvell,pxa168-eth"; reg = <0xb90000 0x10000>; - clocks = <&chip CLKID_GETH1>; + clocks = <&chip_clk CLKID_GETH1>; interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>; /* set by bootloader */ local-mac-address = [00 00 00 00 00 00]; @@ -134,7 +162,7 @@ eth0: ethernet@e50000 { compatible = "marvell,pxa168-eth"; reg = <0xe50000 0x10000>; - clocks = <&chip CLKID_GETH0>; + clocks = <&chip_clk CLKID_GETH0>; interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>; /* set by bootloader */ local-mac-address = [00 00 00 00 00 00]; @@ -233,7 +261,7 @@ compatible = "snps,dw-apb-timer"; reg = <0x2c00 0x14>; interrupts = <8>; - clocks = <&chip CLKID_CFG>; + clocks = <&chip_clk CLKID_CFG>; clock-names = "timer"; status = "okay"; }; @@ -242,7 +270,7 @@ compatible = "snps,dw-apb-timer"; reg = <0x2c14 0x14>; interrupts = <9>; - clocks = <&chip CLKID_CFG>; + clocks = <&chip_clk CLKID_CFG>; clock-names = "timer"; status = "okay"; }; @@ -251,7 +279,7 @@ compatible = "snps,dw-apb-timer"; reg = <0x2c28 0x14>; interrupts = <10>; - clocks = <&chip CLKID_CFG>; + clocks = <&chip_clk CLKID_CFG>; clock-names = "timer"; status = "disabled"; }; @@ -260,7 +288,7 @@ compatible = "snps,dw-apb-timer"; reg = <0x2c3c 0x14>; interrupts = <11>; - clocks = <&chip CLKID_CFG>; + clocks = <&chip_clk CLKID_CFG>; clock-names = "timer"; status = "disabled"; }; @@ -269,7 +297,7 @@ compatible = "snps,dw-apb-timer"; reg = <0x2c50 0x14>; interrupts = <12>; - clocks = <&chip CLKID_CFG>; + clocks = <&chip_clk CLKID_CFG>; clock-names = "timer"; status = "disabled"; }; @@ -278,7 +306,7 @@ compatible = "snps,dw-apb-timer"; reg = <0x2c64 0x14>; interrupts = <13>; - clocks = <&chip CLKID_CFG>; + clocks = <&chip_clk CLKID_CFG>; clock-names = "timer"; status = "disabled"; }; @@ -287,7 +315,7 @@ compatible = "snps,dw-apb-timer"; reg = <0x2c78 0x14>; interrupts = <14>; - clocks = <&chip CLKID_CFG>; + clocks = <&chip_clk CLKID_CFG>; clock-names = "timer"; status = "disabled"; }; @@ -296,7 +324,7 @@ compatible = "snps,dw-apb-timer"; reg = <0x2c8c 0x14>; interrupts = <15>; - clocks = <&chip CLKID_CFG>; + clocks = <&chip_clk CLKID_CFG>; clock-names = "timer"; status = "disabled"; }; @@ -315,7 +343,7 @@ compatible = "marvell,berlin2-ahci", "generic-ahci"; reg = <0xe90000 0x1000>; interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&chip CLKID_SATA>; + clocks = <&chip_clk CLKID_SATA>; #address-cells = <1>; #size-cells = <0>; @@ -335,7 +363,7 @@ sata_phy: phy@e900a0 { compatible = "marvell,berlin2-sata-phy"; reg = <0xe900a0 0x200>; - clocks = <&chip CLKID_SATA>; + clocks = <&chip_clk CLKID_SATA>; #address-cells = <1>; #size-cells = <0>; #phy-cells = <1>; @@ -351,16 +379,28 @@ }; chip: chip-control@ea0000 { - compatible = "marvell,berlin2-chip-ctrl"; - #clock-cells = <1>; - #reset-cells = <2>; + compatible = "simple-mfd", "syscon"; reg = <0xea0000 0x400>; - clocks = <&refclk>; - clock-names = "refclk"; - emmc_pmux: emmc-pmux { - groups = "G26"; - function = "emmc"; + chip_clk: clock { + compatible = "marvell,berlin2-clk"; + #clock-cells = <1>; + clocks = <&refclk>; + clock-names = "refclk"; + }; + + soc_pinctrl: pin-controller { + compatible = "marvell,berlin2-soc-pinctrl"; + + emmc_pmux: emmc-pmux { + groups = "G26"; + function = "emmc"; + }; + }; + + chip_rst: reset { + compatible = "marvell,berlin2-reset"; + #reset-cells = <2>; }; }; @@ -442,22 +482,24 @@ }; sysctrl: system-controller@d000 { - compatible = "marvell,berlin2-system-ctrl"; + compatible = "simple-mfd", "syscon"; reg = <0xd000 0x100>; - uart0_pmux: uart0-pmux { - groups = "GSM4"; - function = "uart0"; - }; - - uart1_pmux: uart1-pmux { - groups = "GSM5"; - function = "uart1"; - }; - - uart2_pmux: uart2-pmux { - groups = "GSM3"; - function = "uart2"; + sys_pinctrl: pin-controller { + compatible = "marvell,berlin2-system-pinctrl"; + uart0_pmux: uart0-pmux { + groups = "GSM4"; + function = "uart0"; + }; + + uart1_pmux: uart1-pmux { + groups = "GSM5"; + function = "uart1"; + }; + uart2_pmux: uart2-pmux { + groups = "GSM3"; + function = "uart2"; + }; }; }; diff --git a/arch/arm/boot/dts/berlin2cd-google-chromecast.dts b/arch/arm/boot/dts/berlin2cd-google-chromecast.dts index 30270be4d..772165ad0 100644 --- a/arch/arm/boot/dts/berlin2cd-google-chromecast.dts +++ b/arch/arm/boot/dts/berlin2cd-google-chromecast.dts @@ -3,9 +3,37 @@ * * Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; diff --git a/arch/arm/boot/dts/berlin2cd.dtsi b/arch/arm/boot/dts/berlin2cd.dtsi index 81b670ac4..900213d78 100644 --- a/arch/arm/boot/dts/berlin2cd.dtsi +++ b/arch/arm/boot/dts/berlin2cd.dtsi @@ -6,9 +6,37 @@ * based on GPL'ed 2.6 kernel sources * (c) Marvell International Ltd. * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. */ #include "skeleton.dtsi" @@ -53,7 +81,7 @@ sdhci0: sdhci@ab0000 { compatible = "mrvl,pxav3-mmc"; reg = <0xab0000 0x200>; - clocks = <&chip CLKID_SDIO0XIN>, <&chip CLKID_SDIO0>; + clocks = <&chip_clk CLKID_SDIO0XIN>, <&chip_clk CLKID_SDIO0>; clock-names = "io", "core"; interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>; status = "disabled"; @@ -77,14 +105,14 @@ compatible = "arm,cortex-a9-twd-timer"; reg = <0xad0600 0x20>; interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_HIGH)>; - clocks = <&chip CLKID_TWD>; + clocks = <&chip_clk CLKID_TWD>; }; usb_phy0: usb-phy@b74000 { compatible = "marvell,berlin2cd-usb-phy"; reg = <0xb74000 0x128>; #phy-cells = <0>; - resets = <&chip 0x178 23>; + resets = <&chip_rst 0x178 23>; status = "disabled"; }; @@ -92,14 +120,14 @@ compatible = "marvell,berlin2cd-usb-phy"; reg = <0xb78000 0x128>; #phy-cells = <0>; - resets = <&chip 0x178 24>; + resets = <&chip_rst 0x178 24>; status = "disabled"; }; eth1: ethernet@b90000 { compatible = "marvell,pxa168-eth"; reg = <0xb90000 0x10000>; - clocks = <&chip CLKID_GETH1>; + clocks = <&chip_clk CLKID_GETH1>; interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>; /* set by bootloader */ local-mac-address = [00 00 00 00 00 00]; @@ -117,7 +145,7 @@ eth0: ethernet@e50000 { compatible = "marvell,pxa168-eth"; reg = <0xe50000 0x10000>; - clocks = <&chip CLKID_GETH0>; + clocks = <&chip_clk CLKID_GETH0>; interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>; /* set by bootloader */ local-mac-address = [00 00 00 00 00 00]; @@ -216,7 +244,7 @@ compatible = "snps,dw-apb-timer"; reg = <0x2c00 0x14>; interrupts = <8>; - clocks = <&chip CLKID_CFG>; + clocks = <&chip_clk CLKID_CFG>; clock-names = "timer"; status = "okay"; }; @@ -225,7 +253,7 @@ compatible = "snps,dw-apb-timer"; reg = <0x2c14 0x14>; interrupts = <9>; - clocks = <&chip CLKID_CFG>; + clocks = <&chip_clk CLKID_CFG>; clock-names = "timer"; status = "okay"; }; @@ -234,7 +262,7 @@ compatible = "snps,dw-apb-timer"; reg = <0x2c28 0x14>; interrupts = <10>; - clocks = <&chip CLKID_CFG>; + clocks = <&chip_clk CLKID_CFG>; clock-names = "timer"; status = "disabled"; }; @@ -243,7 +271,7 @@ compatible = "snps,dw-apb-timer"; reg = <0x2c3c 0x14>; interrupts = <11>; - clocks = <&chip CLKID_CFG>; + clocks = <&chip_clk CLKID_CFG>; clock-names = "timer"; status = "disabled"; }; @@ -252,7 +280,7 @@ compatible = "snps,dw-apb-timer"; reg = <0x2c50 0x14>; interrupts = <12>; - clocks = <&chip CLKID_CFG>; + clocks = <&chip_clk CLKID_CFG>; clock-names = "timer"; status = "disabled"; }; @@ -261,7 +289,7 @@ compatible = "snps,dw-apb-timer"; reg = <0x2c64 0x14>; interrupts = <13>; - clocks = <&chip CLKID_CFG>; + clocks = <&chip_clk CLKID_CFG>; clock-names = "timer"; status = "disabled"; }; @@ -270,7 +298,7 @@ compatible = "snps,dw-apb-timer"; reg = <0x2c78 0x14>; interrupts = <14>; - clocks = <&chip CLKID_CFG>; + clocks = <&chip_clk CLKID_CFG>; clock-names = "timer"; status = "disabled"; }; @@ -279,7 +307,7 @@ compatible = "snps,dw-apb-timer"; reg = <0x2c8c 0x14>; interrupts = <15>; - clocks = <&chip CLKID_CFG>; + clocks = <&chip_clk CLKID_CFG>; clock-names = "timer"; status = "disabled"; }; @@ -295,16 +323,28 @@ }; chip: chip-control@ea0000 { - compatible = "marvell,berlin2cd-chip-ctrl"; - #clock-cells = <1>; - #reset-cells = <2>; + compatible = "simple-mfd", "syscon"; reg = <0xea0000 0x400>; - clocks = <&refclk>; - clock-names = "refclk"; - uart0_pmux: uart0-pmux { - groups = "G6"; - function = "uart0"; + chip_clk: clock { + compatible = "marvell,berlin2-clk"; + #clock-cells = <1>; + clocks = <&refclk>; + clock-names = "refclk"; + }; + + soc_pinctrl: pin-controller { + compatible = "marvell,berlin2cd-soc-pinctrl"; + + uart0_pmux: uart0-pmux { + groups = "G6"; + function = "uart0"; + }; + }; + + chip_rst: reset { + compatible = "marvell,berlin2-reset"; + #reset-cells = <2>; }; }; @@ -312,7 +352,7 @@ compatible = "chipidea,usb2"; reg = <0xed0000 0x200>; interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&chip CLKID_USB0>; + clocks = <&chip_clk CLKID_USB0>; phys = <&usb_phy0>; phy-names = "usb-phy"; status = "disabled"; @@ -322,7 +362,7 @@ compatible = "chipidea,usb2"; reg = <0xee0000 0x200>; interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&chip CLKID_USB1>; + clocks = <&chip_clk CLKID_USB1>; phys = <&usb_phy1>; phy-names = "usb-phy"; status = "disabled"; @@ -389,8 +429,12 @@ }; sysctrl: system-controller@d000 { - compatible = "marvell,berlin2cd-system-ctrl"; + compatible = "simple-mfd", "syscon"; reg = <0xd000 0x100>; + + sys_pinctrl: pin-controller { + compatible = "marvell,berlin2cd-system-pinctrl"; + }; }; sic: interrupt-controller@e000 { diff --git a/arch/arm/boot/dts/berlin2q-marvell-dmp.dts b/arch/arm/boot/dts/berlin2q-marvell-dmp.dts index a98ac1bd8..4a749e5b3 100644 --- a/arch/arm/boot/dts/berlin2q-marvell-dmp.dts +++ b/arch/arm/boot/dts/berlin2q-marvell-dmp.dts @@ -1,9 +1,37 @@ /* * Copyright (C) 2014 Antoine Ténart <antoine.tenart@free-electrons.com> * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; diff --git a/arch/arm/boot/dts/berlin2q.dtsi b/arch/arm/boot/dts/berlin2q.dtsi index be5397288..63a48490e 100644 --- a/arch/arm/boot/dts/berlin2q.dtsi +++ b/arch/arm/boot/dts/berlin2q.dtsi @@ -1,9 +1,37 @@ /* * Copyright (C) 2014 Antoine Ténart <antoine.tenart@free-electrons.com> * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. */ #include <dt-bindings/clock/berlin2q.h> @@ -74,7 +102,7 @@ sdhci0: sdhci@ab0000 { compatible = "mrvl,pxav3-mmc"; reg = <0xab0000 0x200>; - clocks = <&chip CLKID_SDIO1XIN>; + clocks = <&chip_clk CLKID_SDIO1XIN>; interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>; status = "disabled"; }; @@ -82,7 +110,7 @@ sdhci1: sdhci@ab0800 { compatible = "mrvl,pxav3-mmc"; reg = <0xab0800 0x200>; - clocks = <&chip CLKID_SDIO1XIN>; + clocks = <&chip_clk CLKID_SDIO1XIN>; interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>; status = "disabled"; }; @@ -91,7 +119,7 @@ compatible = "mrvl,pxav3-mmc"; reg = <0xab1000 0x200>; interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&chip CLKID_NFC_ECC>, <&chip CLKID_NFC>; + clocks = <&chip_clk CLKID_NFC_ECC>, <&chip_clk CLKID_NFC>; clock-names = "io", "core"; status = "disabled"; }; @@ -112,7 +140,7 @@ local-timer@ad0600 { compatible = "arm,cortex-a9-twd-timer"; reg = <0xad0600 0x20>; - clocks = <&chip CLKID_TWD>; + clocks = <&chip_clk CLKID_TWD>; interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>; }; @@ -127,7 +155,7 @@ compatible = "marvell,berlin2-usb-phy"; reg = <0xa2f400 0x128>; #phy-cells = <0>; - resets = <&chip 0x104 14>; + resets = <&chip_rst 0x104 14>; status = "disabled"; }; @@ -135,7 +163,7 @@ compatible = "chipidea,usb2"; reg = <0xa30000 0x10000>; interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&chip CLKID_USB2>; + clocks = <&chip_clk CLKID_USB2>; phys = <&usb_phy2>; phy-names = "usb-phy"; status = "disabled"; @@ -145,7 +173,7 @@ compatible = "marvell,berlin2-usb-phy"; reg = <0xb74000 0x128>; #phy-cells = <0>; - resets = <&chip 0x104 12>; + resets = <&chip_rst 0x104 12>; status = "disabled"; }; @@ -153,14 +181,14 @@ compatible = "marvell,berlin2-usb-phy"; reg = <0xb78000 0x128>; #phy-cells = <0>; - resets = <&chip 0x104 13>; + resets = <&chip_rst 0x104 13>; status = "disabled"; }; eth0: ethernet@b90000 { compatible = "marvell,pxa168-eth"; reg = <0xb90000 0x10000>; - clocks = <&chip CLKID_GETH0>; + clocks = <&chip_clk CLKID_GETH0>; interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>; /* set by bootloader */ local-mac-address = [00 00 00 00 00 00]; @@ -267,7 +295,7 @@ reg = <0x1400 0x100>; interrupt-parent = <&aic>; interrupts = <4>; - clocks = <&chip CLKID_CFG>; + clocks = <&chip_clk CLKID_CFG>; pinctrl-0 = <&twsi0_pmux>; pinctrl-names = "default"; status = "disabled"; @@ -280,7 +308,7 @@ reg = <0x1800 0x100>; interrupt-parent = <&aic>; interrupts = <5>; - clocks = <&chip CLKID_CFG>; + clocks = <&chip_clk CLKID_CFG>; pinctrl-0 = <&twsi1_pmux>; pinctrl-names = "default"; status = "disabled"; @@ -289,7 +317,7 @@ timer0: timer@2c00 { compatible = "snps,dw-apb-timer"; reg = <0x2c00 0x14>; - clocks = <&chip CLKID_CFG>; + clocks = <&chip_clk CLKID_CFG>; clock-names = "timer"; interrupts = <8>; }; @@ -297,14 +325,14 @@ timer1: timer@2c14 { compatible = "snps,dw-apb-timer"; reg = <0x2c14 0x14>; - clocks = <&chip CLKID_CFG>; + clocks = <&chip_clk CLKID_CFG>; clock-names = "timer"; }; timer2: timer@2c28 { compatible = "snps,dw-apb-timer"; reg = <0x2c28 0x14>; - clocks = <&chip CLKID_CFG>; + clocks = <&chip_clk CLKID_CFG>; clock-names = "timer"; status = "disabled"; }; @@ -312,7 +340,7 @@ timer3: timer@2c3c { compatible = "snps,dw-apb-timer"; reg = <0x2c3c 0x14>; - clocks = <&chip CLKID_CFG>; + clocks = <&chip_clk CLKID_CFG>; clock-names = "timer"; status = "disabled"; }; @@ -320,7 +348,7 @@ timer4: timer@2c50 { compatible = "snps,dw-apb-timer"; reg = <0x2c50 0x14>; - clocks = <&chip CLKID_CFG>; + clocks = <&chip_clk CLKID_CFG>; clock-names = "timer"; status = "disabled"; }; @@ -328,7 +356,7 @@ timer5: timer@2c64 { compatible = "snps,dw-apb-timer"; reg = <0x2c64 0x14>; - clocks = <&chip CLKID_CFG>; + clocks = <&chip_clk CLKID_CFG>; clock-names = "timer"; status = "disabled"; }; @@ -336,7 +364,7 @@ timer6: timer@2c78 { compatible = "snps,dw-apb-timer"; reg = <0x2c78 0x14>; - clocks = <&chip CLKID_CFG>; + clocks = <&chip_clk CLKID_CFG>; clock-names = "timer"; status = "disabled"; }; @@ -344,7 +372,7 @@ timer7: timer@2c8c { compatible = "snps,dw-apb-timer"; reg = <0x2c8c 0x14>; - clocks = <&chip CLKID_CFG>; + clocks = <&chip_clk CLKID_CFG>; clock-names = "timer"; status = "disabled"; }; @@ -360,21 +388,33 @@ }; chip: chip-control@ea0000 { - compatible = "marvell,berlin2q-chip-ctrl"; - #clock-cells = <1>; - #reset-cells = <2>; + compatible = "simple-mfd", "syscon"; reg = <0xea0000 0x400>, <0xdd0170 0x10>; - clocks = <&refclk>; - clock-names = "refclk"; - twsi0_pmux: twsi0-pmux { - groups = "G6"; - function = "twsi0"; + chip_clk: clock { + compatible = "marvell,berlin2q-clk"; + #clock-cells = <1>; + clocks = <&refclk>; + clock-names = "refclk"; + }; + + soc_pinctrl: pin-controller { + compatible = "marvell,berlin2q-soc-pinctrl"; + + twsi0_pmux: twsi0-pmux { + groups = "G6"; + function = "twsi0"; + }; + + twsi1_pmux: twsi1-pmux { + groups = "G7"; + function = "twsi1"; + }; }; - twsi1_pmux: twsi1-pmux { - groups = "G7"; - function = "twsi1"; + chip_rst: reset { + compatible = "marvell,berlin2-reset"; + #reset-cells = <2>; }; }; @@ -382,7 +422,7 @@ compatible = "marvell,berlin2q-ahci", "generic-ahci"; reg = <0xe90000 0x1000>; interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&chip CLKID_SATA>; + clocks = <&chip_clk CLKID_SATA>; #address-cells = <1>; #size-cells = <0>; @@ -402,7 +442,7 @@ sata_phy: phy@e900a0 { compatible = "marvell,berlin2q-sata-phy"; reg = <0xe900a0 0x200>; - clocks = <&chip CLKID_SATA>; + clocks = <&chip_clk CLKID_SATA>; #address-cells = <1>; #size-cells = <0>; #phy-cells = <1>; @@ -421,7 +461,7 @@ compatible = "chipidea,usb2"; reg = <0xed0000 0x10000>; interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&chip CLKID_USB0>; + clocks = <&chip_clk CLKID_USB0>; phys = <&usb_phy0>; phy-names = "usb-phy"; status = "disabled"; @@ -431,7 +471,7 @@ compatible = "chipidea,usb2"; reg = <0xee0000 0x10000>; interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&chip CLKID_USB1>; + clocks = <&chip_clk CLKID_USB1>; phys = <&usb_phy1>; phy-names = "usb-phy"; status = "disabled"; @@ -526,27 +566,37 @@ }; sysctrl: pin-controller@d000 { - compatible = "marvell,berlin2q-system-ctrl"; + compatible = "simple-mfd", "syscon"; reg = <0xd000 0x100>; - uart0_pmux: uart0-pmux { - groups = "GSM12"; - function = "uart0"; - }; + sys_pinctrl: pin-controller { + compatible = "marvell,berlin2q-system-pinctrl"; - uart1_pmux: uart1-pmux { - groups = "GSM14"; - function = "uart1"; - }; + uart0_pmux: uart0-pmux { + groups = "GSM12"; + function = "uart0"; + }; + + uart1_pmux: uart1-pmux { + groups = "GSM14"; + function = "uart1"; + }; + + twsi2_pmux: twsi2-pmux { + groups = "GSM13"; + function = "twsi2"; + }; - twsi2_pmux: twsi2-pmux { - groups = "GSM13"; - function = "twsi2"; + twsi3_pmux: twsi3-pmux { + groups = "GSM14"; + function = "twsi3"; + }; }; - twsi3_pmux: twsi3-pmux { - groups = "GSM14"; - function = "twsi3"; + adc: adc { + compatible = "marvell,berlin2-adc"; + interrupts = <12>, <14>; + interrupt-names = "adc", "tsen"; }; }; diff --git a/arch/arm/boot/dts/cros-ec-keyboard.dtsi b/arch/arm/boot/dts/cros-ec-keyboard.dtsi index 9c7fb0aca..4e42f30cb 100644 --- a/arch/arm/boot/dts/cros-ec-keyboard.dtsi +++ b/arch/arm/boot/dts/cros-ec-keyboard.dtsi @@ -22,6 +22,7 @@ MATRIX_KEY(0x00, 0x02, KEY_F1) MATRIX_KEY(0x00, 0x03, KEY_B) MATRIX_KEY(0x00, 0x04, KEY_F10) + MATRIX_KEY(0x00, 0x05, KEY_RO) MATRIX_KEY(0x00, 0x06, KEY_N) MATRIX_KEY(0x00, 0x08, KEY_EQUAL) MATRIX_KEY(0x00, 0x0a, KEY_RIGHTALT) @@ -34,6 +35,7 @@ MATRIX_KEY(0x01, 0x08, KEY_APOSTROPHE) MATRIX_KEY(0x01, 0x09, KEY_F9) MATRIX_KEY(0x01, 0x0b, KEY_BACKSPACE) + MATRIX_KEY(0x01, 0x0c, KEY_HENKAN) MATRIX_KEY(0x02, 0x00, KEY_LEFTCTRL) MATRIX_KEY(0x02, 0x01, KEY_TAB) @@ -45,6 +47,7 @@ MATRIX_KEY(0x02, 0x07, KEY_102ND) MATRIX_KEY(0x02, 0x08, KEY_LEFTBRACE) MATRIX_KEY(0x02, 0x09, KEY_F8) + MATRIX_KEY(0x02, 0x0a, KEY_YEN) MATRIX_KEY(0x03, 0x01, KEY_GRAVE) MATRIX_KEY(0x03, 0x02, KEY_F2) @@ -53,6 +56,7 @@ MATRIX_KEY(0x03, 0x06, KEY_6) MATRIX_KEY(0x03, 0x08, KEY_MINUS) MATRIX_KEY(0x03, 0x0b, KEY_BACKSLASH) + MATRIX_KEY(0x03, 0x0c, KEY_MUHENKAN) MATRIX_KEY(0x04, 0x00, KEY_RIGHTCTRL) MATRIX_KEY(0x04, 0x01, KEY_A) diff --git a/arch/arm/boot/dts/cx92755.dtsi b/arch/arm/boot/dts/cx92755.dtsi index 490c08075..af333261d 100644 --- a/arch/arm/boot/dts/cx92755.dtsi +++ b/arch/arm/boot/dts/cx92755.dtsi @@ -82,6 +82,12 @@ clocks = <&main_clk>; }; + rtc@f0000c30 { + compatible = "cnxt,cx92755-rtc"; + reg = <0xf0000c30 0x18>; + interrupts = <25>; + }; + uc_regs: syscon@f00003a0 { compatible = "cnxt,cx92755-uc", "syscon"; reg = <0xf00003a0 0x10>; @@ -110,4 +116,15 @@ interrupts = <46>; status = "disabled"; }; + + i2c: i2c@f0000120 { + compatible = "cnxt,cx92755-i2c"; + reg = <0xf0000120 0x10>; + interrupts = <28>; + clocks = <&main_clk>; + clock-frequency = <100000>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; }; diff --git a/arch/arm/boot/dts/cx92755_equinox.dts b/arch/arm/boot/dts/cx92755_equinox.dts index f33bf5635..90d52cc41 100644 --- a/arch/arm/boot/dts/cx92755_equinox.dts +++ b/arch/arm/boot/dts/cx92755_equinox.dts @@ -72,3 +72,7 @@ &uart0 { status = "okay"; }; + +&i2c { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/dove-cm-a510.dts b/arch/arm/boot/dts/dove-cm-a510.dts deleted file mode 100644 index 50c0d6904..000000000 --- a/arch/arm/boot/dts/dove-cm-a510.dts +++ /dev/null @@ -1,38 +0,0 @@ -/dts-v1/; - -#include "dove.dtsi" - -/ { - model = "Compulab CM-A510"; - compatible = "compulab,cm-a510", "marvell,dove"; - - memory { - device_type = "memory"; - reg = <0x00000000 0x40000000>; - }; - - chosen { - bootargs = "console=ttyS0,115200n8 earlyprintk"; - }; -}; - -&uart0 { status = "okay"; }; -&uart1 { status = "okay"; }; -&sdio0 { status = "okay"; }; -&sdio1 { status = "okay"; }; -&sata0 { status = "okay"; }; - -&spi0 { - status = "okay"; - - /* spi0.0: 4M Flash Winbond W25Q32BV */ - spi-flash@0 { - compatible = "st,w25q32"; - spi-max-frequency = <20000000>; - reg = <0>; - }; -}; - -&i2c0 { - status = "okay"; -}; diff --git a/arch/arm/boot/dts/dove-cm-a510.dtsi b/arch/arm/boot/dts/dove-cm-a510.dtsi new file mode 100644 index 000000000..59b4056b4 --- /dev/null +++ b/arch/arm/boot/dts/dove-cm-a510.dtsi @@ -0,0 +1,195 @@ +/* + * Device Tree include for Compulab CM-A510 System-on-Module + * + * Copyright (C) 2015, Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; version 2 of the + * License. + * + * This file is distributed in the hope that it will be useful + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/* + * The CM-A510 comes with several optional components: + * + * Memory options: + * D512: 512M + * D1024: 1G + * + * NAND options: + * N512: 512M NAND + * + * Ethernet options: + * E1: PHY RTL8211D on internal GbE (SMI address 0x03) + * E2: Additional ethernet NIC RTL8111D on PCIe1 + * + * Audio options: + * A: TI TLV320AIC23b audio codec (I2C address 0x1a) + * + * Touchscreen options: + * I: TI TSC2046 touchscreen controller (on SPI1) + * + * USB options: + * U2: 2 dual-role USB2.0 ports + * U4: 2 additional USB2.0 host ports (via USB1) + * + * WiFi options: + * W: Broadcom BCM4319 802.11b/g/n (USI WM-N-BM-01 on SDIO1) + * + * GPIOs used on CM-A510: + * 1 GbE PHY reset (active low) + * 3 WakeUp + * 8 PowerOff (active low) + * 13 Touchscreen pen irq (active low) + * 65 System LED (active high) + * 69 USB Hub reset (active low) + * 70 WLAN reset (active low) + * 71 WLAN regulator (active high) + */ + +#include "dove.dtsi" + +/ { + model = "Compulab CM-A510"; + compatible = "compulab,cm-a510", "marvell,dove"; + + /* + * Set the minimum memory size here and let the + * bootloader set the real size. + */ + memory { + device_type = "memory"; + reg = <0x00000000 0x20000000>; + }; + + leds { + compatible = "gpio-leds"; + /* Set upper NAND data bit to GPO */ + pinctrl-0 = <&pmx_nand_gpo>; + pinctrl-names = "default"; + + system { + label = "cm-a510:system:green"; + gpios = <&gpio2 1 GPIO_ACTIVE_HIGH>; + default-state = "keep"; + }; + }; + + regulators { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <0>; + + wifi_power: regulator@1 { + compatible = "regulator-fixed"; + regulator-name = "WiFi Power"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio2 7 GPIO_ACTIVE_HIGH>; + }; + }; +}; + +/* Optional RTL8211D GbE PHY on SMI address 0x03 */ +ðphy { + reg = <3>; + status = "disabled"; +}; + +&i2c0 { + /* Optional TI TLV320AIC23b audio codec */ + opt_audio: audio@1a { + compatible = "ti,tlv320aic23"; + reg = <0x1a>; + status = "disabled"; + }; +}; + +/* Optional RTL8111D GbE NIC on PCIe1 */ +&pcie { status = "disabled"; }; + +&pcie1 { + pinctrl-0 = <&pmx_pcie1_clkreq>; + pinctrl-names = "default"; + status = "disabled"; +}; + +&pinctrl { + pmx_uart2: pmx-uart2 { + marvell,pins = "mpp14", "mpp15"; + marvell,function = "uart2"; + }; +}; + +/* Optional Broadcom BCM4319 802.11b/g/n WiFi module */ +&sdio1 { + non-removable; + vmmc-supply = <&wifi_power>; + reset-gpio = <&gpio2 6 GPIO_ACTIVE_LOW>; + status = "disabled"; +}; + +&spi0 { + status = "okay"; + + /* 1M Flash Winbond W25Q80BL */ + flash@0 { + compatible = "winbond,w25q80"; + spi-max-frequency = <80000000>; + reg = <0>; + }; +}; + +&spi1 { + pinctrl-0 = <&pmx_spi1_20_23>; + pinctrl-names = "default"; + status = "disabled"; + + /* Optional TI TSC2046 touchscreen controller */ + opt_touch: touchscreen@0 { + compatible = "ti,tsc2046"; + spi-max-frequency = <2500000>; + reg = <0>; + pinctrl-0 = <&pmx_gpio_13>; + pinctrl-names = "default"; + interrupts-extended = <&gpio0 13 IRQ_TYPE_EDGE_FALLING>; + }; +}; + +&uart2 { + pinctrl-0 = <&pmx_uart2>; + pinctrl-names = "default"; +}; diff --git a/arch/arm/boot/dts/dove-sbc-a510.dts b/arch/arm/boot/dts/dove-sbc-a510.dts new file mode 100644 index 000000000..288e707de --- /dev/null +++ b/arch/arm/boot/dts/dove-sbc-a510.dts @@ -0,0 +1,182 @@ +/* + * Device Tree file for Compulab SBC-A510 Single Board Computer + * + * Copyright (C) 2015, Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; version 2 of the + * License. + * + * This file is distributed in the hope that it will be useful + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/* + * SBC-A510 comprises a PCA9555 I2C GPIO expander its GPIO lines connected to + * + * 0.0 USB0 VBUS_EN (active high) + * 0.1 USB0 VBUS_GOOD + * 0.2 DVI transmitter TI TFP410 MSEN + * 0.3 DVI transmitter TI TFP410 PD# (active low power down) + * 0.4 LVDS transmitter DS90C365 PD# (active low power down) + * 0.5 LCD nRST (active low reset) + * 0.6 PCIe0 nRST (active low reset) + * 0.7 mini-PCIe slot W_DISABLE# + * + * 1.0 MMC WP + * 1.1 Camera Input FPC FLASH_STB and P21.5 + * 1.2 Camera Input FPC WE and P21.22 + * 1.3 MMC VCC_EN (active high) and P21.7 + * 1.4 Camera Input FPC AFTR_RST and P21.17 + * 1.5 Camera Input FPC OE and P21.19 + * 1.6 Camera Input FPC SNPSHT and P21.6 + * 1.7 Camera Input FPC SHTR and P21.10 + */ + +/dts-v1/; + +#include "dove-cm-a510.dtsi" + +/ { + model = "Compulab SBC-A510"; + compatible = "compulab,sbc-a510", "compulab,cm-a510", "marvell,dove"; + + chosen { + stdout-path = &uart0; + }; + + regulators { + usb0_power: regulator@2 { + compatible = "regulator-fixed"; + regulator-name = "USB Power"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio_ext 0 GPIO_ACTIVE_HIGH>; + }; + + mmc_power: regulator@3 { + compatible = "regulator-fixed"; + regulator-name = "MMC Power"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio_ext 13 GPIO_ACTIVE_HIGH>; + }; + }; +}; + +/* Ethernet0 depends on CM-A510 option E1 */ +&mdio { status = "disabled"; }; +ð { status = "disabled"; }; +ðphy { status = "disabled"; }; + +/* + * USB port 0 can be powered and monitored by I2C GPIO expander: + * VBUS_ENABLE on GPIO0, VBUS_GOOD on GPIO1 + */ +&ehci0 { + status = "okay"; + vbus-supply = <&usb0_power>; +}; + +/* USB port 1 (and ports 2, 3 if CM-A510 has U4 option) */ +&ehci1 { status = "okay"; }; + +/* + * I2C bus layout: + * i2c0: + * - Audio Codec, 0x1a (option from CM-A510) + * - DVI transmitter TI TFP410, 0x39 + * - HDMI/DVI DDC channel + * i2c1: + * - GPIO expander, NXP PCA9555, 0x20 + * - VGA DDC channel + */ +&i2c { + pinctrl-0 = <&pmx_i2c1>; + pinctrl-names = "default"; +}; + +&i2c0 { + /* TI TFP410 DVI transmitter */ + dvi: video@39 { + compatible = "ti,tfp410"; + reg = <0x39>; + powerdown-gpio = <&gpio_ext 3 GPIO_ACTIVE_LOW>; + }; +}; + +&i2c1 { + status = "okay"; + + /* NXP PCA9555 GPIO expander */ + gpio_ext: gpio@20 { + compatible = "nxp,pca9555"; + reg = <0x20>; + #gpio-cells = <2>; + }; +}; + +&pcie { status = "okay"; }; + +/* + * PCIe0 can be configured by Jumper E1 to be either connected to + * a mini-PCIe slot or a Pericom PI7C9X111 PCIe-to-PCI bridge. + */ +&pcie0 { + status = "okay"; + pinctrl-0 = <&pmx_pcie0_clkreq>; + pinctrl-names = "default"; + reset-gpios = <&gpio_ext 6 GPIO_ACTIVE_LOW>; +}; + +/* Ethernet1 depends on CM-A510 option E2 */ +&pcie1 { status = "disabled"; }; + +/* SATA connector */ +&sata0 { status = "okay"; }; + +/* + * SDIO0 is connected to a MMC/SD/SDIO socket, I2C GPIO expander has + * VCC_MMC_ENABLE on GPIO13, MMC_WP on GPIO10 + */ +&sdio0 { + vmmc-supply = <&mmc_power>; + wp-gpios = <&gpio_ext 10 GPIO_ACTIVE_LOW>; + status = "okay"; +}; + +/* UART0 on RS232 mini-connector */ +&uart0 { status = "okay"; }; +/* UART2 on pin headers */ +&uart2 { status = "okay"; }; diff --git a/arch/arm/boot/dts/dove.dtsi b/arch/arm/boot/dts/dove.dtsi index 9ad829523..38b1f7e60 100644 --- a/arch/arm/boot/dts/dove.dtsi +++ b/arch/arm/boot/dts/dove.dtsi @@ -33,6 +33,42 @@ marvell,tauros2-cache-features = <0>; }; + i2c-mux { + compatible = "i2c-mux-pinctrl"; + #address-cells = <1>; + #size-cells = <0>; + + i2c-parent = <&i2c>; + + pinctrl-names = "i2c0", "i2c1", "i2c2"; + pinctrl-0 = <&pmx_i2cmux_0>; + pinctrl-1 = <&pmx_i2cmux_1>; + pinctrl-2 = <&pmx_i2cmux_2>; + + i2c0: i2c@0 { + reg = <0>; + #address-cells = <1>; + #size-cells = <0>; + status = "okay"; + }; + + i2c1: i2c@1 { + reg = <1>; + #address-cells = <1>; + #size-cells = <0>; + /* Requires pmx_i2c1 on i2c controller node */ + status = "disabled"; + }; + + i2c2: i2c@2 { + reg = <2>; + #address-cells = <1>; + #size-cells = <0>; + /* Requires pmx_i2c2 on i2c controller node */ + status = "disabled"; + }; + }; + mbus { compatible = "marvell,dove-mbus", "marvell,mbus", "simple-bus"; #address-cells = <2>; @@ -123,7 +159,7 @@ status = "disabled"; }; - i2c0: i2c-ctrl@11000 { + i2c: i2c-ctrl@11000 { compatible = "marvell,mv64xxx-i2c"; reg = <0x11000 0x20>; #address-cells = <1>; @@ -132,7 +168,7 @@ clock-frequency = <400000>; timeout-ms = <1000>; clocks = <&core_clk 0>; - status = "disabled"; + status = "okay"; }; uart0: serial@12000 { diff --git a/arch/arm/boot/dts/dra7.dtsi b/arch/arm/boot/dts/dra7.dtsi index f03a091cd..1e29ccf77 100644 --- a/arch/arm/boot/dts/dra7.dtsi +++ b/arch/arm/boot/dts/dra7.dtsi @@ -116,7 +116,7 @@ ranges = <0 0x2000 0x2000>; scm_conf: scm_conf@0 { - compatible = "syscon"; + compatible = "syscon", "simple-bus"; reg = <0x0 0x1400>; #address-cells = <1>; #size-cells = <1>; @@ -131,6 +131,11 @@ regulator-max-microvolt = <3000000>; }; }; + + scm_conf_clocks: clocks { + #address-cells = <1>; + #size-cells = <0>; + }; }; dra7_pmx_core: pinmux@1400 { @@ -1135,6 +1140,7 @@ ctrl-module = <&omap_control_sata>; clocks = <&sys_clkin1>, <&sata_ref_clk>; clock-names = "sysclk", "refclk"; + syscon-pllreset = <&scm_conf 0x3fc>; #phy-cells = <0>; }; @@ -1469,6 +1475,44 @@ clocks = <&sys_clkin1>; status = "disabled"; }; + + dss: dss@58000000 { + compatible = "ti,dra7-dss"; + /* 'reg' defined in dra72x.dtsi and dra74x.dtsi */ + /* 'clocks' defined in dra72x.dtsi and dra74x.dtsi */ + status = "disabled"; + ti,hwmods = "dss_core"; + /* CTRL_CORE_DSS_PLL_CONTROL */ + syscon-pll-ctrl = <&scm_conf 0x538>; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + dispc@58001000 { + compatible = "ti,dra7-dispc"; + reg = <0x58001000 0x1000>; + interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>; + ti,hwmods = "dss_dispc"; + clocks = <&dss_dss_clk>; + clock-names = "fck"; + /* CTRL_CORE_SMA_SW_1 */ + syscon-pol = <&scm_conf 0x534>; + }; + + hdmi: encoder@58060000 { + compatible = "ti,dra7-hdmi"; + reg = <0x58040000 0x200>, + <0x58040200 0x80>, + <0x58040300 0x80>, + <0x58060000 0x19000>; + reg-names = "wp", "pll", "phy", "core"; + interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + ti,hwmods = "dss_hdmi"; + clocks = <&dss_48mhz_clk>, <&dss_hdmi_clk>; + clock-names = "fck", "sys_clk"; + }; + }; }; thermal_zones: thermal-zones { diff --git a/arch/arm/boot/dts/dra72-evm.dts b/arch/arm/boot/dts/dra72-evm.dts index 6b05f6a0b..803738414 100644 --- a/arch/arm/boot/dts/dra72-evm.dts +++ b/arch/arm/boot/dts/dra72-evm.dts @@ -19,6 +19,10 @@ reg = <0x80000000 0x40000000>; /* 1024 MB */ }; + aliases { + display0 = &hdmi0; + }; + evm_3v3: fixedregulator-evm_3v3 { compatible = "regulator-fixed"; regulator-name = "evm_3v3"; @@ -35,6 +39,51 @@ compatible = "linux,extcon-usb-gpio"; id-gpio = <&pcf_gpio_21 2 GPIO_ACTIVE_HIGH>; }; + + hdmi0: connector { + compatible = "hdmi-connector"; + label = "hdmi"; + + type = "a"; + + port { + hdmi_connector_in: endpoint { + remote-endpoint = <&tpd12s015_out>; + }; + }; + }; + + tpd12s015: encoder { + compatible = "ti,tpd12s015"; + + pinctrl-names = "default"; + pinctrl-0 = <&tpd12s015_pins>; + + gpios = <&pcf_hdmi 4 GPIO_ACTIVE_HIGH>, /* P4, CT CP HPD */ + <&pcf_hdmi 5 GPIO_ACTIVE_HIGH>, /* P5, LS OE */ + <&gpio7 12 GPIO_ACTIVE_HIGH>; /* gpio7_12/sp1_cs2, HPD */ + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + tpd12s015_in: endpoint { + remote-endpoint = <&hdmi_out>; + }; + }; + + port@1 { + reg = <1>; + + tpd12s015_out: endpoint { + remote-endpoint = <&hdmi_connector_in>; + }; + }; + }; + }; }; &dra7_pmx_core { @@ -45,6 +94,13 @@ >; }; + i2c5_pins: pinmux_i2c5_pins { + pinctrl-single,pins = < + 0x2b4 (PIN_INPUT | MUX_MODE10) /* mcasp1_axr0.i2c5_sda */ + 0x2b8 (PIN_INPUT | MUX_MODE10) /* mcasp1_axr1.i2c5_scl */ + >; + }; + nand_default: nand_default { pinctrl-single,pins = < 0x0 (PIN_INPUT | MUX_MODE0) /* gpmc_ad0 */ @@ -142,6 +198,19 @@ 0xb8 (PIN_OUTPUT | MUX_MODE1) /* gpmc_cs2.qspi1_cs0 */ >; }; + + hdmi_pins: pinmux_hdmi_pins { + pinctrl-single,pins = < + 0x408 (PIN_INPUT | MUX_MODE1) /* i2c2_sda.hdmi1_ddc_scl */ + 0x40c (PIN_INPUT | MUX_MODE1) /* i2c2_scl.hdmi1_ddc_sda */ + >; + }; + + tpd12s015_pins: pinmux_tpd12s015_pins { + pinctrl-single,pins = < + 0x3b8 (PIN_INPUT_PULLDOWN | MUX_MODE14) /* gpio7_12 HPD */ + >; + }; }; &i2c1 { @@ -277,6 +346,27 @@ }; }; +&i2c5 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&i2c5_pins>; + clock-frequency = <400000>; + + pcf_hdmi: pcf8575@26 { + compatible = "nxp,pcf8575"; + reg = <0x26>; + gpio-controller; + #gpio-cells = <2>; + /* + * initial state is used here to keep the mdio interface + * selected on RU89 through SEL_VIN4_MUX_S0, VIN2_S1 and + * VIN2_S0 driven high otherwise Ethernet stops working + * VIN6_SEL_S0 is low, thus selecting McASP3 over VIN6 + */ + lines-initial-states = <0x0f2b>; + }; +}; + &uart1 { status = "okay"; }; @@ -567,3 +657,23 @@ }; }; }; + +&dss { + status = "ok"; + + vdda_video-supply = <&ldo5_reg>; +}; + +&hdmi { + status = "ok"; + vdda-supply = <&ldo3_reg>; + + pinctrl-names = "default"; + pinctrl-0 = <&hdmi_pins>; + + port { + hdmi_out: endpoint { + remote-endpoint = <&tpd12s015_in>; + }; + }; +}; diff --git a/arch/arm/boot/dts/dra72x.dtsi b/arch/arm/boot/dts/dra72x.dtsi index 03d742f8d..eaca143fa 100644 --- a/arch/arm/boot/dts/dra72x.dtsi +++ b/arch/arm/boot/dts/dra72x.dtsi @@ -34,3 +34,14 @@ interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>; }; }; + +&dss { + reg = <0x58000000 0x80>, + <0x58004054 0x4>, + <0x58004300 0x20>; + reg-names = "dss", "pll1_clkctrl", "pll1"; + + clocks = <&dss_dss_clk>, + <&dss_video1_clk>; + clock-names = "fck", "video1_clk"; +}; diff --git a/arch/arm/boot/dts/dra74x.dtsi b/arch/arm/boot/dts/dra74x.dtsi index cc560a709..fa995d0ca 100644 --- a/arch/arm/boot/dts/dra74x.dtsi +++ b/arch/arm/boot/dts/dra74x.dtsi @@ -73,3 +73,18 @@ }; }; }; + +&dss { + reg = <0x58000000 0x80>, + <0x58004054 0x4>, + <0x58004300 0x20>, + <0x58005054 0x4>, + <0x58005300 0x20>; + reg-names = "dss", "pll1_clkctrl", "pll1", + "pll2_clkctrl", "pll2"; + + clocks = <&dss_dss_clk>, + <&dss_video1_clk>, + <&dss_video2_clk>; + clock-names = "fck", "video1_clk", "video2_clk"; +}; diff --git a/arch/arm/boot/dts/dra7xx-clocks.dtsi b/arch/arm/boot/dts/dra7xx-clocks.dtsi index 3b933f74d..357bedeeb 100644 --- a/arch/arm/boot/dts/dra7xx-clocks.dtsi +++ b/arch/arm/boot/dts/dra7xx-clocks.dtsi @@ -1531,6 +1531,7 @@ clocks = <&dpll_per_h12x2_ck>; ti,bit-shift = <8>; reg = <0x1120>; + ti,set-rate-parent; }; dss_hdmi_clk: dss_hdmi_clk { @@ -2136,3 +2137,13 @@ clocks = <&dpll_usb_ck>; }; }; + +&scm_conf_clocks { + dss_deshdcp_clk: dss_deshdcp_clk { + #clock-cells = <0>; + compatible = "ti,gate-clock"; + clocks = <&l3_iclk_div>; + ti,bit-shift = <0>; + reg = <0x558>; + }; +}; diff --git a/arch/arm/boot/dts/emev2-kzm9d.dts b/arch/arm/boot/dts/emev2-kzm9d.dts index 19446273e..1dee0aa4f 100644 --- a/arch/arm/boot/dts/emev2-kzm9d.dts +++ b/arch/arm/boot/dts/emev2-kzm9d.dts @@ -81,7 +81,7 @@ regulator-boot-on; }; - lan9220@20000000 { + ethernet@20000000 { compatible = "smsc,lan9220", "smsc,lan9115"; reg = <0x20000000 0x10000>; phy-mode = "mii"; @@ -96,7 +96,7 @@ }; &pfc { - uart1_pins: uart@e1030000 { + uart1_pins: serial@e1030000 { renesas,groups = "uart1_ctrl", "uart1_data"; renesas,function = "uart1"; }; diff --git a/arch/arm/boot/dts/exynos3250-monk.dts b/arch/arm/boot/dts/exynos3250-monk.dts index 1d483c1c8..a5863acc5 100644 --- a/arch/arm/boot/dts/exynos3250-monk.dts +++ b/arch/arm/boot/dts/exynos3250-monk.dts @@ -16,6 +16,7 @@ #include "exynos3250.dtsi" #include <dt-bindings/input/input.h> #include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/clock/samsung,s2mps11.h> / { model = "Samsung Monk board"; @@ -432,7 +433,7 @@ }; &rtc { - clocks = <&cmu CLK_RTC>, <&s2mps14_osc 0>; + clocks = <&cmu CLK_RTC>, <&s2mps14_osc S2MPS11_CLK_AP>; clock-names = "rtc", "rtc_src"; status = "okay"; }; diff --git a/arch/arm/boot/dts/exynos3250-rinato.dts b/arch/arm/boot/dts/exynos3250-rinato.dts index 0b9906880..031853b75 100644 --- a/arch/arm/boot/dts/exynos3250-rinato.dts +++ b/arch/arm/boot/dts/exynos3250-rinato.dts @@ -16,6 +16,7 @@ #include "exynos3250.dtsi" #include <dt-bindings/input/input.h> #include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/clock/samsung,s2mps11.h> / { model = "Samsung Rinato board"; @@ -567,6 +568,10 @@ status = "okay"; }; +&jpeg { + status = "okay"; +}; + &mshc_0 { #address-cells = <1>; #size-cells = <0>; @@ -605,7 +610,7 @@ }; &rtc { - clocks = <&cmu CLK_RTC>, <&s2mps14_osc 0>; + clocks = <&cmu CLK_RTC>, <&s2mps14_osc S2MPS11_CLK_AP>; clock-names = "rtc", "rtc_src"; status = "okay"; }; diff --git a/arch/arm/boot/dts/exynos3250.dtsi b/arch/arm/boot/dts/exynos3250.dtsi index e3bfb11c6..2db99433e 100644 --- a/arch/arm/boot/dts/exynos3250.dtsi +++ b/arch/arm/boot/dts/exynos3250.dtsi @@ -138,8 +138,8 @@ mipi_phy: video-phy@10020710 { compatible = "samsung,s5pv210-mipi-video-phy"; - reg = <0x10020710 8>; #phy-cells = <1>; + syscon = <&pmu_system_controller>; }; pd_cam: cam-power-domain@10023C00 { @@ -189,7 +189,7 @@ }; rtc: rtc@10070000 { - compatible = "samsung,exynos3250-rtc"; + compatible = "samsung,s3c6410-rtc"; reg = <0x10070000 0x100>; interrupts = <0 73 0>, <0 74 0>; interrupt-parent = <&pmu_system_controller>; @@ -243,6 +243,30 @@ interrupts = <0 240 0>; }; + jpeg: codec@11830000 { + compatible = "samsung,exynos3250-jpeg"; + reg = <0x11830000 0x1000>; + interrupts = <0 171 0>; + clocks = <&cmu CLK_JPEG>, <&cmu CLK_SCLK_JPEG>; + clock-names = "jpeg", "sclk"; + power-domains = <&pd_cam>; + assigned-clocks = <&cmu CLK_MOUT_CAM_BLK>, <&cmu CLK_SCLK_JPEG>; + assigned-clock-rates = <0>, <150000000>; + assigned-clock-parents = <&cmu CLK_DIV_MPLL_PRE>; + iommus = <&sysmmu_jpeg>; + status = "disabled"; + }; + + sysmmu_jpeg: sysmmu@11A60000 { + compatible = "samsung,exynos-sysmmu"; + reg = <0x11a60000 0x1000>; + interrupts = <0 156 0>, <0 161 0>; + clock-names = "sysmmu", "master"; + clocks = <&cmu CLK_SMMUJPEG>, <&cmu CLK_JPEG>; + power-domains = <&pd_cam>; + #iommu-cells = <0>; + }; + fimd: fimd@11c00000 { compatible = "samsung,exynos3250-fimd"; reg = <0x11c00000 0x30000>; @@ -251,6 +275,7 @@ clocks = <&cmu CLK_SCLK_FIMD0>, <&cmu CLK_FIMD0>; clock-names = "sclk_fimd", "fimd"; power-domains = <&pd_lcd0>; + iommus = <&sysmmu_fimd0>; samsung,sysreg = <&sys_reg>; status = "disabled"; }; @@ -270,6 +295,16 @@ status = "disabled"; }; + sysmmu_fimd0: sysmmu@11E20000 { + compatible = "samsung,exynos-sysmmu"; + reg = <0x11e20000 0x1000>; + interrupts = <0 80 0>, <0 81 0>; + clock-names = "sysmmu", "master"; + clocks = <&cmu CLK_SMMUFIMD0>, <&cmu CLK_FIMD0>; + power-domains = <&pd_lcd0>; + #iommu-cells = <0>; + }; + hsotg: hsotg@12480000 { compatible = "snps,dwc2"; reg = <0x12480000 0x20000>; @@ -364,9 +399,20 @@ clock-names = "mfc", "sclk_mfc"; clocks = <&cmu CLK_MFC>, <&cmu CLK_SCLK_MFC>; power-domains = <&pd_mfc>; + iommus = <&sysmmu_mfc>; status = "disabled"; }; + sysmmu_mfc: sysmmu@13620000 { + compatible = "samsung,exynos-sysmmu"; + reg = <0x13620000 0x1000>; + interrupts = <0 96 0>, <0 98 0>; + clock-names = "sysmmu", "master"; + clocks = <&cmu CLK_SMMUMFC_L>, <&cmu CLK_MFC>; + power-domains = <&pd_mfc>; + #iommu-cells = <0>; + }; + serial_0: serial@13800000 { compatible = "samsung,exynos4210-uart"; reg = <0x13800000 0x100>; diff --git a/arch/arm/boot/dts/exynos4.dtsi b/arch/arm/boot/dts/exynos4.dtsi index e20cdc24c..b0d52b1a6 100644 --- a/arch/arm/boot/dts/exynos4.dtsi +++ b/arch/arm/boot/dts/exynos4.dtsi @@ -78,7 +78,6 @@ mipi_phy: video-phy@10020710 { compatible = "samsung,s5pv210-mipi-video-phy"; - reg = <0x10020710 8>; #phy-cells = <1>; syscon = <&pmu_system_controller>; }; @@ -167,7 +166,7 @@ phys = <&mipi_phy 1>; phy-names = "dsim"; clocks = <&clock CLK_DSIM0>, <&clock CLK_SCLK_MIPI0>; - clock-names = "bus_clk", "pll_clk"; + clock-names = "bus_clk", "sclk_mipi"; status = "disabled"; #address-cells = <1>; #size-cells = <0>; @@ -190,6 +189,7 @@ clock-names = "fimc", "sclk_fimc"; power-domains = <&pd_cam>; samsung,sysreg = <&sys_reg>; + iommus = <&sysmmu_fimc0>; status = "disabled"; }; @@ -201,6 +201,7 @@ clock-names = "fimc", "sclk_fimc"; power-domains = <&pd_cam>; samsung,sysreg = <&sys_reg>; + iommus = <&sysmmu_fimc1>; status = "disabled"; }; @@ -212,6 +213,7 @@ clock-names = "fimc", "sclk_fimc"; power-domains = <&pd_cam>; samsung,sysreg = <&sys_reg>; + iommus = <&sysmmu_fimc2>; status = "disabled"; }; @@ -223,6 +225,7 @@ clock-names = "fimc", "sclk_fimc"; power-domains = <&pd_cam>; samsung,sysreg = <&sys_reg>; + iommus = <&sysmmu_fimc3>; status = "disabled"; }; @@ -257,7 +260,7 @@ }; }; - watchdog@10060000 { + watchdog: watchdog@10060000 { compatible = "samsung,s3c2410-wdt"; reg = <0x10060000 0x100>; interrupts = <0 43 0>; @@ -266,7 +269,7 @@ status = "disabled"; }; - rtc@10070000 { + rtc: rtc@10070000 { compatible = "samsung,s3c6410-rtc"; reg = <0x10070000 0x100>; interrupt-parent = <&pmu_system_controller>; @@ -276,7 +279,7 @@ status = "disabled"; }; - keypad@100A0000 { + keypad: keypad@100A0000 { compatible = "samsung,s5pv210-keypad"; reg = <0x100A0000 0x100>; interrupts = <0 109 0>; @@ -285,7 +288,7 @@ status = "disabled"; }; - sdhci@12510000 { + sdhci_0: sdhci@12510000 { compatible = "samsung,exynos4210-sdhci"; reg = <0x12510000 0x100>; interrupts = <0 73 0>; @@ -294,7 +297,7 @@ status = "disabled"; }; - sdhci@12520000 { + sdhci_1: sdhci@12520000 { compatible = "samsung,exynos4210-sdhci"; reg = <0x12520000 0x100>; interrupts = <0 74 0>; @@ -303,7 +306,7 @@ status = "disabled"; }; - sdhci@12530000 { + sdhci_2: sdhci@12530000 { compatible = "samsung,exynos4210-sdhci"; reg = <0x12530000 0x100>; interrupts = <0 75 0>; @@ -312,7 +315,7 @@ status = "disabled"; }; - sdhci@12540000 { + sdhci_3: sdhci@12540000 { compatible = "samsung,exynos4210-sdhci"; reg = <0x12540000 0x100>; interrupts = <0 76 0>; @@ -331,7 +334,7 @@ status = "disabled"; }; - hsotg@12480000 { + hsotg: hsotg@12480000 { compatible = "samsung,s3c6400-hsotg"; reg = <0x12480000 0x20000>; interrupts = <0 71 0>; @@ -342,7 +345,7 @@ status = "disabled"; }; - ehci@12580000 { + ehci: ehci@12580000 { compatible = "samsung,exynos4210-ehci"; reg = <0x12580000 0x100>; interrupts = <0 70 0>; @@ -368,7 +371,7 @@ }; }; - ohci@12590000 { + ohci: ohci@12590000 { compatible = "samsung,exynos4210-ohci"; reg = <0x12590000 0x100>; interrupts = <0 70 0>; @@ -417,6 +420,8 @@ power-domains = <&pd_mfc>; clocks = <&clock CLK_MFC>, <&clock CLK_SCLK_MFC>; clock-names = "mfc", "sclk_mfc"; + iommus = <&sysmmu_mfc_l>, <&sysmmu_mfc_r>; + iommu-names = "left", "right"; status = "disabled"; }; @@ -621,7 +626,7 @@ status = "disabled"; }; - pwm@139D0000 { + pwm: pwm@139D0000 { compatible = "samsung,exynos4210-pwm"; reg = <0x139D0000 0x1000>; interrupts = <0 37 0>, <0 38 0>, <0 39 0>, <0 40 0>, <0 41 0>; @@ -681,6 +686,7 @@ clocks = <&clock CLK_SCLK_FIMD0>, <&clock CLK_FIMD0>; clock-names = "sclk_fimd", "fimd"; power-domains = <&pd_lcd0>; + iommus = <&sysmmu_fimd0>; samsung,sysreg = <&sys_reg>; status = "disabled"; }; @@ -689,6 +695,15 @@ #include "exynos4412-tmu-sensor-conf.dtsi" }; + jpeg_codec: jpeg-codec@11840000 { + compatible = "samsung,exynos4210-jpeg"; + reg = <0x11840000 0x1000>; + interrupts = <0 88 0>; + clocks = <&clock CLK_JPEG>; + clock-names = "jpeg"; + power-domains = <&pd_cam>; + }; + hdmi: hdmi@12D00000 { compatible = "samsung,exynos4210-hdmi"; reg = <0x12D00000 0x70000>; @@ -709,6 +724,7 @@ interrupts = <0 91 0>; reg = <0x12C10000 0x2100>, <0x12c00000 0x300>; power-domains = <&pd_tv>; + iommus = <&sysmmu_tv>; status = "disabled"; }; @@ -819,4 +835,114 @@ clock-names = "ppmu"; status = "disabled"; }; + + sysmmu_mfc_l: sysmmu@13620000 { + compatible = "samsung,exynos-sysmmu"; + reg = <0x13620000 0x1000>; + interrupt-parent = <&combiner>; + interrupts = <5 5>; + clock-names = "sysmmu", "master"; + clocks = <&clock CLK_SMMU_MFCL>, <&clock CLK_MFC>; + power-domains = <&pd_mfc>; + #iommu-cells = <0>; + }; + + sysmmu_mfc_r: sysmmu@13630000 { + compatible = "samsung,exynos-sysmmu"; + reg = <0x13630000 0x1000>; + interrupt-parent = <&combiner>; + interrupts = <5 6>; + clock-names = "sysmmu", "master"; + clocks = <&clock CLK_SMMU_MFCR>, <&clock CLK_MFC>; + power-domains = <&pd_mfc>; + #iommu-cells = <0>; + }; + + sysmmu_tv: sysmmu@12E20000 { + compatible = "samsung,exynos-sysmmu"; + reg = <0x12E20000 0x1000>; + interrupt-parent = <&combiner>; + interrupts = <5 4>; + clock-names = "sysmmu", "master"; + clocks = <&clock CLK_SMMU_TV>, <&clock CLK_MIXER>; + power-domains = <&pd_tv>; + #iommu-cells = <0>; + }; + + sysmmu_fimc0: sysmmu@11A20000 { + compatible = "samsung,exynos-sysmmu"; + reg = <0x11A20000 0x1000>; + interrupt-parent = <&combiner>; + interrupts = <4 2>; + clock-names = "sysmmu", "master"; + clocks = <&clock CLK_SMMU_FIMC0>, <&clock CLK_FIMC0>; + power-domains = <&pd_cam>; + #iommu-cells = <0>; + }; + + sysmmu_fimc1: sysmmu@11A30000 { + compatible = "samsung,exynos-sysmmu"; + reg = <0x11A30000 0x1000>; + interrupt-parent = <&combiner>; + interrupts = <4 3>; + clock-names = "sysmmu", "master"; + clocks = <&clock CLK_SMMU_FIMC1>, <&clock CLK_FIMC1>; + power-domains = <&pd_cam>; + #iommu-cells = <0>; + }; + + sysmmu_fimc2: sysmmu@11A40000 { + compatible = "samsung,exynos-sysmmu"; + reg = <0x11A40000 0x1000>; + interrupt-parent = <&combiner>; + interrupts = <4 4>; + clock-names = "sysmmu", "master"; + clocks = <&clock CLK_SMMU_FIMC2>, <&clock CLK_FIMC2>; + power-domains = <&pd_cam>; + #iommu-cells = <0>; + }; + + sysmmu_fimc3: sysmmu@11A50000 { + compatible = "samsung,exynos-sysmmu"; + reg = <0x11A50000 0x1000>; + interrupt-parent = <&combiner>; + interrupts = <4 5>; + clock-names = "sysmmu", "master"; + clocks = <&clock CLK_SMMU_FIMC3>, <&clock CLK_FIMC3>; + power-domains = <&pd_cam>; + #iommu-cells = <0>; + }; + + sysmmu_jpeg: sysmmu@11A60000 { + compatible = "samsung,exynos-sysmmu"; + reg = <0x11A60000 0x1000>; + interrupt-parent = <&combiner>; + interrupts = <4 6>; + clock-names = "sysmmu", "master"; + clocks = <&clock CLK_SMMU_JPEG>, <&clock CLK_JPEG>; + power-domains = <&pd_cam>; + #iommu-cells = <0>; + }; + + sysmmu_rotator: sysmmu@12A30000 { + compatible = "samsung,exynos-sysmmu"; + reg = <0x12A30000 0x1000>; + interrupt-parent = <&combiner>; + interrupts = <5 0>; + clock-names = "sysmmu", "master"; + clocks = <&clock CLK_SMMU_ROTATOR>, <&clock CLK_ROTATOR>; + power-domains = <&pd_lcd0>; + #iommu-cells = <0>; + }; + + sysmmu_fimd0: sysmmu@11E20000 { + compatible = "samsung,exynos-sysmmu"; + reg = <0x11E20000 0x1000>; + interrupt-parent = <&combiner>; + interrupts = <5 2>; + clock-names = "sysmmu", "master"; + clocks = <&clock CLK_SMMU_FIMD0>, <&clock CLK_FIMD0>; + power-domains = <&pd_lcd0>; + #iommu-cells = <0>; + }; }; diff --git a/arch/arm/boot/dts/exynos4210-origen.dts b/arch/arm/boot/dts/exynos4210-origen.dts index b81146141..e050d85cd 100644 --- a/arch/arm/boot/dts/exynos4210-origen.dts +++ b/arch/arm/boot/dts/exynos4210-origen.dts @@ -50,209 +50,6 @@ }; }; - watchdog@10060000 { - status = "okay"; - }; - - rtc@10070000 { - status = "okay"; - }; - - tmu@100C0000 { - status = "okay"; - }; - - sdhci@12530000 { - bus-width = <4>; - pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_bus4 &sd2_cd>; - pinctrl-names = "default"; - vmmc-supply = <&mmc_reg>; - status = "okay"; - }; - - sdhci@12510000 { - bus-width = <4>; - pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus4 &sd0_cd>; - pinctrl-names = "default"; - vmmc-supply = <&mmc_reg>; - status = "okay"; - }; - - g2d@12800000 { - status = "okay"; - }; - - codec@13400000 { - samsung,mfc-r = <0x43000000 0x800000>; - samsung,mfc-l = <0x51000000 0x800000>; - status = "okay"; - }; - - serial@13800000 { - status = "okay"; - }; - - serial@13810000 { - status = "okay"; - }; - - serial@13820000 { - status = "okay"; - }; - - serial@13830000 { - status = "okay"; - }; - - i2c@13860000 { - status = "okay"; - samsung,i2c-sda-delay = <100>; - samsung,i2c-max-bus-freq = <20000>; - pinctrl-0 = <&i2c0_bus>; - pinctrl-names = "default"; - - max8997_pmic@66 { - compatible = "maxim,max8997-pmic"; - reg = <0x66>; - interrupt-parent = <&gpx0>; - interrupts = <4 0>, <3 0>; - - max8997,pmic-buck1-dvs-voltage = <1350000>; - max8997,pmic-buck2-dvs-voltage = <1100000>; - max8997,pmic-buck5-dvs-voltage = <1200000>; - - regulators { - ldo1_reg: LDO1 { - regulator-name = "VDD_ABB_3.3V"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - }; - - ldo2_reg: LDO2 { - regulator-name = "VDD_ALIVE_1.1V"; - regulator-min-microvolt = <1100000>; - regulator-max-microvolt = <1100000>; - regulator-always-on; - }; - - ldo3_reg: LDO3 { - regulator-name = "VMIPI_1.1V"; - regulator-min-microvolt = <1100000>; - regulator-max-microvolt = <1100000>; - }; - - ldo4_reg: LDO4 { - regulator-name = "VDD_RTC_1.8V"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-always-on; - }; - - ldo6_reg: LDO6 { - regulator-name = "VMIPI_1.8V"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-always-on; - }; - - ldo7_reg: LDO7 { - regulator-name = "VDD_AUD_1.8V"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - ldo8_reg: LDO8 { - regulator-name = "VADC_3.3V"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - }; - - ldo9_reg: LDO9 { - regulator-name = "DVDD_SWB_2.8V"; - regulator-min-microvolt = <2800000>; - regulator-max-microvolt = <2800000>; - regulator-always-on; - }; - - ldo10_reg: LDO10 { - regulator-name = "VDD_PLL_1.1V"; - regulator-min-microvolt = <1100000>; - regulator-max-microvolt = <1100000>; - regulator-always-on; - }; - - ldo11_reg: LDO11 { - regulator-name = "VDD_AUD_3V"; - regulator-min-microvolt = <3000000>; - regulator-max-microvolt = <3000000>; - }; - - ldo14_reg: LDO14 { - regulator-name = "AVDD18_SWB_1.8V"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-always-on; - }; - - ldo17_reg: LDO17 { - regulator-name = "VDD_SWB_3.3V"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - }; - - ldo21_reg: LDO21 { - regulator-name = "VDD_MIF_1.2V"; - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1200000>; - regulator-always-on; - }; - - buck1_reg: BUCK1 { - /* - * HACK: The real name is VDD_ARM_1.2V, - * but exynos-cpufreq does not support - * DT-based regulator lookup yet. - */ - regulator-name = "vdd_arm"; - regulator-min-microvolt = <950000>; - regulator-max-microvolt = <1350000>; - regulator-always-on; - regulator-boot-on; - }; - - buck2_reg: BUCK2 { - regulator-name = "VDD_INT_1.1V"; - regulator-min-microvolt = <900000>; - regulator-max-microvolt = <1100000>; - regulator-always-on; - regulator-boot-on; - }; - - buck3_reg: BUCK3 { - regulator-name = "VDD_G3D_1.1V"; - regulator-min-microvolt = <900000>; - regulator-max-microvolt = <1100000>; - }; - - buck5_reg: BUCK5 { - regulator-name = "VDDQ_M1M2_1.2V"; - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1200000>; - regulator-always-on; - }; - - buck7_reg: BUCK7 { - regulator-name = "VDD_LCD_3.3V"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-boot-on; - regulator-always-on; - }; - }; - }; - }; - gpio_keys { compatible = "gpio-keys"; #address-cells = <1>; @@ -314,12 +111,6 @@ }; }; - fimd@11c00000 { - pinctrl-0 = <&lcd_en &lcd_clk &lcd_data24 &pwm0_out>; - pinctrl-names = "default"; - status = "okay"; - }; - display-timings { native-mode = <&timing0>; timing0: timing { @@ -335,3 +126,216 @@ }; }; }; + +&cpu0 { + cpu0-supply = <&buck1_reg>; +}; + +&fimd { + pinctrl-0 = <&lcd_en &lcd_clk &lcd_data24 &pwm0_out>; + pinctrl-names = "default"; + status = "okay"; +}; + +&g2d { + status = "okay"; +}; + +&i2c_0 { + status = "okay"; + samsung,i2c-sda-delay = <100>; + samsung,i2c-max-bus-freq = <20000>; + pinctrl-0 = <&i2c0_bus>; + pinctrl-names = "default"; + + max8997_pmic@66 { + compatible = "maxim,max8997-pmic"; + reg = <0x66>; + interrupt-parent = <&gpx0>; + interrupts = <4 0>, <3 0>; + + max8997,pmic-buck1-dvs-voltage = <1350000>; + max8997,pmic-buck2-dvs-voltage = <1100000>; + max8997,pmic-buck5-dvs-voltage = <1200000>; + + regulators { + ldo1_reg: LDO1 { + regulator-name = "VDD_ABB_3.3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + ldo2_reg: LDO2 { + regulator-name = "VDD_ALIVE_1.1V"; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + regulator-always-on; + }; + + ldo3_reg: LDO3 { + regulator-name = "VMIPI_1.1V"; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + }; + + ldo4_reg: LDO4 { + regulator-name = "VDD_RTC_1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + ldo6_reg: LDO6 { + regulator-name = "VMIPI_1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + ldo7_reg: LDO7 { + regulator-name = "VDD_AUD_1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + ldo8_reg: LDO8 { + regulator-name = "VADC_3.3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + ldo9_reg: LDO9 { + regulator-name = "DVDD_SWB_2.8V"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-always-on; + }; + + ldo10_reg: LDO10 { + regulator-name = "VDD_PLL_1.1V"; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + regulator-always-on; + }; + + ldo11_reg: LDO11 { + regulator-name = "VDD_AUD_3V"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + }; + + ldo14_reg: LDO14 { + regulator-name = "AVDD18_SWB_1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + ldo17_reg: LDO17 { + regulator-name = "VDD_SWB_3.3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + ldo21_reg: LDO21 { + regulator-name = "VDD_MIF_1.2V"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + }; + + buck1_reg: BUCK1 { + /* + * HACK: The real name is VDD_ARM_1.2V, + * but exynos-cpufreq does not support + * DT-based regulator lookup yet. + */ + regulator-name = "vdd_arm"; + regulator-min-microvolt = <950000>; + regulator-max-microvolt = <1350000>; + regulator-always-on; + regulator-boot-on; + }; + + buck2_reg: BUCK2 { + regulator-name = "VDD_INT_1.1V"; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <1100000>; + regulator-always-on; + regulator-boot-on; + }; + + buck3_reg: BUCK3 { + regulator-name = "VDD_G3D_1.1V"; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <1100000>; + }; + + buck5_reg: BUCK5 { + regulator-name = "VDDQ_M1M2_1.2V"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + }; + + buck7_reg: BUCK7 { + regulator-name = "VDD_LCD_3.3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + }; + }; +}; + +&mfc { + samsung,mfc-r = <0x43000000 0x800000>; + samsung,mfc-l = <0x51000000 0x800000>; + status = "okay"; +}; + +&sdhci_0 { + bus-width = <4>; + pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus4 &sd0_cd>; + pinctrl-names = "default"; + vmmc-supply = <&mmc_reg>; + status = "okay"; +}; + +&sdhci_2 { + bus-width = <4>; + pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_bus4 &sd2_cd>; + pinctrl-names = "default"; + vmmc-supply = <&mmc_reg>; + status = "okay"; +}; + +&serial_0 { + status = "okay"; +}; + +&serial_1 { + status = "okay"; +}; + +&serial_2 { + status = "okay"; +}; + +&serial_3 { + status = "okay"; +}; + +&rtc { + status = "okay"; +}; + +&tmu { + status = "okay"; +}; + +&watchdog { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/exynos4210-smdkv310.dts b/arch/arm/boot/dts/exynos4210-smdkv310.dts index 86216fff1..043b03caf 100644 --- a/arch/arm/boot/dts/exynos4210-smdkv310.dts +++ b/arch/arm/boot/dts/exynos4210-smdkv310.dts @@ -30,181 +30,181 @@ stdout-path = &serial_1; }; - sdhci@12530000 { - bus-width = <4>; - pinctrl-names = "default"; - pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus4>; - status = "okay"; - }; + fixed-rate-clocks { + xxti { + compatible = "samsung,clock-xxti"; + clock-frequency = <12000000>; + }; - g2d@12800000 { - status = "okay"; + xusbxti { + compatible = "samsung,clock-xusbxti"; + clock-frequency = <24000000>; + }; }; +}; - codec@13400000 { - samsung,mfc-r = <0x43000000 0x800000>; - samsung,mfc-l = <0x51000000 0x800000>; - status = "okay"; - }; +&g2d { + status = "okay"; +}; - serial@13800000 { - status = "okay"; - }; +&i2c_0 { + #address-cells = <1>; + #size-cells = <0>; + samsung,i2c-sda-delay = <100>; + samsung,i2c-max-bus-freq = <100000>; + status = "okay"; - serial@13810000 { - status = "okay"; + eeprom@50 { + compatible = "samsung,24ad0xd1"; + reg = <0x50>; }; - serial@13820000 { - status = "okay"; + eeprom@52 { + compatible = "samsung,24ad0xd1"; + reg = <0x52>; }; +}; - serial@13830000 { - status = "okay"; +&keypad { + samsung,keypad-num-rows = <2>; + samsung,keypad-num-columns = <8>; + linux,keypad-no-autorepeat; + linux,keypad-wakeup; + pinctrl-names = "default"; + pinctrl-0 = <&keypad_rows &keypad_cols>; + status = "okay"; + + key_1 { + keypad,row = <0>; + keypad,column = <3>; + linux,code = <2>; }; - pinctrl@11000000 { - keypad_rows: keypad-rows { - samsung,pins = "gpx2-0", "gpx2-1"; - samsung,pin-function = <3>; - samsung,pin-pud = <3>; - samsung,pin-drv = <0>; - }; - - keypad_cols: keypad-cols { - samsung,pins = "gpx1-0", "gpx1-1", "gpx1-2", "gpx1-3", - "gpx1-4", "gpx1-5", "gpx1-6", "gpx1-7"; - samsung,pin-function = <3>; - samsung,pin-pud = <0>; - samsung,pin-drv = <0>; - }; + key_2 { + keypad,row = <0>; + keypad,column = <4>; + linux,code = <3>; }; - keypad@100A0000 { - samsung,keypad-num-rows = <2>; - samsung,keypad-num-columns = <8>; - linux,keypad-no-autorepeat; - linux,keypad-wakeup; - pinctrl-names = "default"; - pinctrl-0 = <&keypad_rows &keypad_cols>; - status = "okay"; + key_3 { + keypad,row = <0>; + keypad,column = <5>; + linux,code = <4>; + }; - key_1 { - keypad,row = <0>; - keypad,column = <3>; - linux,code = <2>; - }; + key_4 { + keypad,row = <0>; + keypad,column = <6>; + linux,code = <5>; + }; - key_2 { - keypad,row = <0>; - keypad,column = <4>; - linux,code = <3>; - }; + key_5 { + keypad,row = <0>; + keypad,column = <7>; + linux,code = <6>; + }; - key_3 { - keypad,row = <0>; - keypad,column = <5>; - linux,code = <4>; - }; + key_a { + keypad,row = <1>; + keypad,column = <3>; + linux,code = <30>; + }; - key_4 { - keypad,row = <0>; - keypad,column = <6>; - linux,code = <5>; - }; + key_b { + keypad,row = <1>; + keypad,column = <4>; + linux,code = <48>; + }; - key_5 { - keypad,row = <0>; - keypad,column = <7>; - linux,code = <6>; - }; + key_c { + keypad,row = <1>; + keypad,column = <5>; + linux,code = <46>; + }; - key_a { - keypad,row = <1>; - keypad,column = <3>; - linux,code = <30>; - }; + key_d { + keypad,row = <1>; + keypad,column = <6>; + linux,code = <32>; + }; - key_b { - keypad,row = <1>; - keypad,column = <4>; - linux,code = <48>; - }; + key_e { + keypad,row = <1>; + keypad,column = <7>; + linux,code = <18>; + }; +}; - key_c { - keypad,row = <1>; - keypad,column = <5>; - linux,code = <46>; - }; +&mfc { + samsung,mfc-r = <0x43000000 0x800000>; + samsung,mfc-l = <0x51000000 0x800000>; + status = "okay"; +}; - key_d { - keypad,row = <1>; - keypad,column = <6>; - linux,code = <32>; - }; +&pinctrl_1 { + keypad_rows: keypad-rows { + samsung,pins = "gpx2-0", "gpx2-1"; + samsung,pin-function = <3>; + samsung,pin-pud = <3>; + samsung,pin-drv = <0>; + }; - key_e { - keypad,row = <1>; - keypad,column = <7>; - linux,code = <18>; - }; + keypad_cols: keypad-cols { + samsung,pins = "gpx1-0", "gpx1-1", "gpx1-2", "gpx1-3", + "gpx1-4", "gpx1-5", "gpx1-6", "gpx1-7"; + samsung,pin-function = <3>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; }; +}; - i2c@13860000 { - #address-cells = <1>; - #size-cells = <0>; - samsung,i2c-sda-delay = <100>; - samsung,i2c-max-bus-freq = <100000>; - status = "okay"; - - eeprom@50 { - compatible = "samsung,24ad0xd1"; - reg = <0x50>; - }; +&sdhci_2 { + bus-width = <4>; + pinctrl-names = "default"; + pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus4>; + status = "okay"; +}; - eeprom@52 { - compatible = "samsung,24ad0xd1"; - reg = <0x52>; - }; - }; +&serial_0 { + status = "okay"; +}; - spi_2: spi@13940000 { - cs-gpios = <&gpc1 2 0>; - status = "okay"; +&serial_1 { + status = "okay"; +}; - w25x80@0 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "w25x80"; - reg = <0>; - spi-max-frequency = <1000000>; +&serial_2 { + status = "okay"; +}; - controller-data { - samsung,spi-feedback-delay = <0>; - }; +&serial_3 { + status = "okay"; +}; - partition@0 { - label = "U-Boot"; - reg = <0x0 0x40000>; - read-only; - }; +&spi_2 { + cs-gpios = <&gpc1 2 0>; + status = "okay"; - partition@40000 { - label = "Kernel"; - reg = <0x40000 0xc0000>; - }; + w25x80@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "w25x80"; + reg = <0>; + spi-max-frequency = <1000000>; + + controller-data { + samsung,spi-feedback-delay = <0>; }; - }; - fixed-rate-clocks { - xxti { - compatible = "samsung,clock-xxti"; - clock-frequency = <12000000>; + partition@0 { + label = "U-Boot"; + reg = <0x0 0x40000>; + read-only; }; - xusbxti { - compatible = "samsung,clock-xusbxti"; - clock-frequency = <24000000>; + partition@40000 { + label = "Kernel"; + reg = <0x40000 0xc0000>; }; }; }; diff --git a/arch/arm/boot/dts/exynos4210-trats.dts b/arch/arm/boot/dts/exynos4210-trats.dts index 32c5fd8f6..ba34886f8 100644 --- a/arch/arm/boot/dts/exynos4210-trats.dts +++ b/arch/arm/boot/dts/exynos4210-trats.dts @@ -89,42 +89,6 @@ }; }; - hsotg@12480000 { - vusb_d-supply = <&vusb_reg>; - vusb_a-supply = <&vusbdac_reg>; - dr_mode = "peripheral"; - status = "okay"; - }; - - sdhci_emmc: sdhci@12510000 { - bus-width = <8>; - non-removable; - pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus8>; - pinctrl-names = "default"; - vmmc-supply = <&vemmc_reg>; - status = "okay"; - }; - - exynos-usbphy@125B0000 { - status = "okay"; - }; - - serial@13800000 { - status = "okay"; - }; - - serial@13810000 { - status = "okay"; - }; - - serial@13820000 { - status = "okay"; - }; - - serial@13830000 { - status = "okay"; - }; - gpio-keys { compatible = "gpio-keys"; @@ -158,201 +122,6 @@ }; }; - i2c@13890000 { - samsung,i2c-sda-delay = <100>; - samsung,i2c-slave-addr = <0x10>; - samsung,i2c-max-bus-freq = <400000>; - pinctrl-0 = <&i2c3_bus>; - pinctrl-names = "default"; - status = "okay"; - - mms114-touchscreen@48 { - compatible = "melfas,mms114"; - reg = <0x48>; - interrupt-parent = <&gpx0>; - interrupts = <4 2>; - x-size = <720>; - y-size = <1280>; - avdd-supply = <&tsp_reg>; - vdd-supply = <&tsp_reg>; - }; - }; - - i2c@138B0000 { - samsung,i2c-sda-delay = <100>; - samsung,i2c-slave-addr = <0x10>; - samsung,i2c-max-bus-freq = <100000>; - pinctrl-0 = <&i2c5_bus>; - pinctrl-names = "default"; - status = "okay"; - - max8997_pmic@66 { - compatible = "maxim,max8997-pmic"; - - reg = <0x66>; - - max8997,pmic-buck1-uses-gpio-dvs; - max8997,pmic-buck2-uses-gpio-dvs; - max8997,pmic-buck5-uses-gpio-dvs; - - max8997,pmic-ignore-gpiodvs-side-effect; - max8997,pmic-buck125-default-dvs-idx = <0>; - - max8997,pmic-buck125-dvs-gpios = <&gpx0 5 0>, - <&gpx0 6 0>, - <&gpl0 0 0>; - - max8997,pmic-buck1-dvs-voltage = <1350000>, <1300000>, - <1250000>, <1200000>, - <1150000>, <1100000>, - <1000000>, <950000>; - - max8997,pmic-buck2-dvs-voltage = <1100000>, <1000000>, - <950000>, <900000>, - <1100000>, <1000000>, - <950000>, <900000>; - - max8997,pmic-buck5-dvs-voltage = <1200000>, <1200000>, - <1200000>, <1200000>, - <1200000>, <1200000>, - <1200000>, <1200000>; - - regulators { - valive_reg: LDO2 { - regulator-name = "VALIVE_1.1V_C210"; - regulator-min-microvolt = <1100000>; - regulator-max-microvolt = <1100000>; - regulator-always-on; - }; - - vusb_reg: LDO3 { - regulator-name = "VUSB_1.1V_C210"; - regulator-min-microvolt = <1100000>; - regulator-max-microvolt = <1100000>; - }; - - vmipi_reg: LDO4 { - regulator-name = "VMIPI_1.8V"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - vpda_reg: LDO6 { - regulator-name = "VCC_1.8V_PDA"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-always-on; - }; - - vcam_reg: LDO7 { - regulator-name = "CAM_ISP_1.8V"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - vusbdac_reg: LDO8 { - regulator-name = "VUSB/VDAC_3.3V_C210"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - }; - - vccpda_reg: LDO9 { - regulator-name = "VCC_2.8V_PDA"; - regulator-min-microvolt = <2800000>; - regulator-max-microvolt = <2800000>; - regulator-always-on; - }; - - vpll_reg: LDO10 { - regulator-name = "VPLL_1.1V_C210"; - regulator-min-microvolt = <1100000>; - regulator-max-microvolt = <1100000>; - regulator-always-on; - }; - - vtcam_reg: LDO12 { - regulator-name = "VT_CAM_1.8V"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - vcclcd_reg: LDO13 { - regulator-name = "VCC_3.3V_LCD"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - }; - - vlcd_reg: LDO15 { - regulator-name = "VLCD_2.2V"; - regulator-min-microvolt = <2200000>; - regulator-max-microvolt = <2200000>; - }; - - camsensor_reg: LDO16 { - regulator-name = "CAM_SENSOR_IO_1.8V"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - vddq_reg: LDO21 { - regulator-name = "VDDQ_M1M2_1.2V"; - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1200000>; - regulator-always-on; - }; - - varm_breg: BUCK1 { - /* - * HACK: The real name is VARM_1.2V_C210, - * but exynos-cpufreq does not support - * DT-based regulator lookup yet. - */ - regulator-name = "vdd_arm"; - regulator-min-microvolt = <900000>; - regulator-max-microvolt = <1350000>; - regulator-always-on; - }; - - vint_breg: BUCK2 { - regulator-name = "VINT_1.1V_C210"; - regulator-min-microvolt = <900000>; - regulator-max-microvolt = <1100000>; - regulator-always-on; - }; - - camisp_breg: BUCK4 { - regulator-name = "CAM_ISP_CORE_1.2V"; - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1200000>; - }; - - vmem_breg: BUCK5 { - regulator-name = "VMEM_1.2V_C210"; - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1200000>; - regulator-always-on; - }; - - vccsub_breg: BUCK7 { - regulator-name = "VCC_SUB_2.0V"; - regulator-min-microvolt = <2000000>; - regulator-max-microvolt = <2000000>; - regulator-always-on; - }; - - safe1_sreg: ESAFEOUT1 { - regulator-name = "SAFEOUT1"; - regulator-always-on; - }; - - safe2_sreg: ESAFEOUT2 { - regulator-name = "SAFEOUT2"; - regulator-boot-on; - }; - }; - }; - }; - fixed-rate-clocks { xxti { compatible = "samsung,clock-xxti"; @@ -365,71 +134,6 @@ }; }; - dsi_0: dsi@11C80000 { - vddcore-supply = <&vusb_reg>; - vddio-supply = <&vmipi_reg>; - samsung,pll-clock-frequency = <24000000>; - status = "okay"; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@1 { - reg = <1>; - - dsi_out: endpoint { - remote-endpoint = <&dsi_in>; - samsung,burst-clock-frequency = <500000000>; - samsung,esc-clock-frequency = <20000000>; - }; - }; - }; - - panel@0 { - reg = <0>; - compatible = "samsung,s6e8aa0"; - vdd3-supply = <&vcclcd_reg>; - vci-supply = <&vlcd_reg>; - reset-gpios = <&gpy4 5 0>; - power-on-delay= <50>; - reset-delay = <100>; - init-delay = <100>; - flip-horizontal; - flip-vertical; - panel-width-mm = <58>; - panel-height-mm = <103>; - - display-timings { - timing-0 { - clock-frequency = <57153600>; - hactive = <720>; - vactive = <1280>; - hfront-porch = <5>; - hback-porch = <5>; - hsync-len = <5>; - vfront-porch = <13>; - vback-porch = <1>; - vsync-len = <2>; - }; - }; - - port { - dsi_in: endpoint { - remote-endpoint = <&dsi_out>; - }; - }; - }; - }; - - fimd@11c00000 { - status = "okay"; - }; - - tmu@100C0000 { - status = "okay"; - }; - thermal-zones { cpu_thermal: cpu-thermal { cooling-maps { @@ -483,3 +187,303 @@ }; }; }; + +&cpu0 { + cpu0-supply = <&varm_breg>; +}; + +&dsi_0 { + vddcore-supply = <&vusb_reg>; + vddio-supply = <&vmipi_reg>; + samsung,pll-clock-frequency = <24000000>; + status = "okay"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@1 { + reg = <1>; + + dsi_out: endpoint { + remote-endpoint = <&dsi_in>; + samsung,burst-clock-frequency = <500000000>; + samsung,esc-clock-frequency = <20000000>; + }; + }; + }; + + panel@0 { + reg = <0>; + compatible = "samsung,s6e8aa0"; + vdd3-supply = <&vcclcd_reg>; + vci-supply = <&vlcd_reg>; + reset-gpios = <&gpy4 5 0>; + power-on-delay= <50>; + reset-delay = <100>; + init-delay = <100>; + flip-horizontal; + flip-vertical; + panel-width-mm = <58>; + panel-height-mm = <103>; + + display-timings { + timing-0 { + clock-frequency = <57153600>; + hactive = <720>; + vactive = <1280>; + hfront-porch = <5>; + hback-porch = <5>; + hsync-len = <5>; + vfront-porch = <13>; + vback-porch = <1>; + vsync-len = <2>; + }; + }; + + port { + dsi_in: endpoint { + remote-endpoint = <&dsi_out>; + }; + }; + }; +}; + +&exynos_usbphy { + status = "okay"; +}; + +&fimd { + status = "okay"; +}; + +&hsotg { + vusb_d-supply = <&vusb_reg>; + vusb_a-supply = <&vusbdac_reg>; + dr_mode = "peripheral"; + status = "okay"; +}; + +&i2c_3 { + samsung,i2c-sda-delay = <100>; + samsung,i2c-slave-addr = <0x10>; + samsung,i2c-max-bus-freq = <400000>; + pinctrl-0 = <&i2c3_bus>; + pinctrl-names = "default"; + status = "okay"; + + mms114-touchscreen@48 { + compatible = "melfas,mms114"; + reg = <0x48>; + interrupt-parent = <&gpx0>; + interrupts = <4 2>; + x-size = <720>; + y-size = <1280>; + avdd-supply = <&tsp_reg>; + vdd-supply = <&tsp_reg>; + }; +}; + +&i2c_5 { + samsung,i2c-sda-delay = <100>; + samsung,i2c-slave-addr = <0x10>; + samsung,i2c-max-bus-freq = <100000>; + pinctrl-0 = <&i2c5_bus>; + pinctrl-names = "default"; + status = "okay"; + + max8997_pmic@66 { + compatible = "maxim,max8997-pmic"; + + reg = <0x66>; + + max8997,pmic-buck1-uses-gpio-dvs; + max8997,pmic-buck2-uses-gpio-dvs; + max8997,pmic-buck5-uses-gpio-dvs; + + max8997,pmic-ignore-gpiodvs-side-effect; + max8997,pmic-buck125-default-dvs-idx = <0>; + + max8997,pmic-buck125-dvs-gpios = <&gpx0 5 0>, + <&gpx0 6 0>, + <&gpl0 0 0>; + + max8997,pmic-buck1-dvs-voltage = <1350000>, <1300000>, + <1250000>, <1200000>, + <1150000>, <1100000>, + <1000000>, <950000>; + + max8997,pmic-buck2-dvs-voltage = <1100000>, <1000000>, + <950000>, <900000>, + <1100000>, <1000000>, + <950000>, <900000>; + + max8997,pmic-buck5-dvs-voltage = <1200000>, <1200000>, + <1200000>, <1200000>, + <1200000>, <1200000>, + <1200000>, <1200000>; + + regulators { + valive_reg: LDO2 { + regulator-name = "VALIVE_1.1V_C210"; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + regulator-always-on; + }; + + vusb_reg: LDO3 { + regulator-name = "VUSB_1.1V_C210"; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + }; + + vmipi_reg: LDO4 { + regulator-name = "VMIPI_1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + vpda_reg: LDO6 { + regulator-name = "VCC_1.8V_PDA"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + vcam_reg: LDO7 { + regulator-name = "CAM_ISP_1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + vusbdac_reg: LDO8 { + regulator-name = "VUSB/VDAC_3.3V_C210"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + vccpda_reg: LDO9 { + regulator-name = "VCC_2.8V_PDA"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-always-on; + }; + + vpll_reg: LDO10 { + regulator-name = "VPLL_1.1V_C210"; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + regulator-always-on; + }; + + vtcam_reg: LDO12 { + regulator-name = "VT_CAM_1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + vcclcd_reg: LDO13 { + regulator-name = "VCC_3.3V_LCD"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + vlcd_reg: LDO15 { + regulator-name = "VLCD_2.2V"; + regulator-min-microvolt = <2200000>; + regulator-max-microvolt = <2200000>; + }; + + camsensor_reg: LDO16 { + regulator-name = "CAM_SENSOR_IO_1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + vddq_reg: LDO21 { + regulator-name = "VDDQ_M1M2_1.2V"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + }; + + varm_breg: BUCK1 { + /* + * HACK: The real name is VARM_1.2V_C210, + * but exynos-cpufreq does not support + * DT-based regulator lookup yet. + */ + regulator-name = "vdd_arm"; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <1350000>; + regulator-always-on; + }; + + vint_breg: BUCK2 { + regulator-name = "VINT_1.1V_C210"; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <1100000>; + regulator-always-on; + }; + + camisp_breg: BUCK4 { + regulator-name = "CAM_ISP_CORE_1.2V"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + vmem_breg: BUCK5 { + regulator-name = "VMEM_1.2V_C210"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + }; + + vccsub_breg: BUCK7 { + regulator-name = "VCC_SUB_2.0V"; + regulator-min-microvolt = <2000000>; + regulator-max-microvolt = <2000000>; + regulator-always-on; + }; + + safe1_sreg: ESAFEOUT1 { + regulator-name = "SAFEOUT1"; + regulator-always-on; + }; + + safe2_sreg: ESAFEOUT2 { + regulator-name = "SAFEOUT2"; + regulator-boot-on; + }; + }; + }; +}; + +&sdhci_0 { + bus-width = <8>; + non-removable; + pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus8>; + pinctrl-names = "default"; + vmmc-supply = <&vemmc_reg>; + status = "okay"; +}; + +&serial_0 { + status = "okay"; +}; + +&serial_1 { + status = "okay"; +}; + +&serial_2 { + status = "okay"; +}; + +&serial_3 { + status = "okay"; +}; + +&tmu { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/exynos4210-universal_c210.dts b/arch/arm/boot/dts/exynos4210-universal_c210.dts index d4f2b1131..775892b2c 100644 --- a/arch/arm/boot/dts/exynos4210-universal_c210.dts +++ b/arch/arm/boot/dts/exynos4210-universal_c210.dts @@ -548,6 +548,10 @@ }; }; +&cpu0 { + cpu0-supply = <&vdd_arm_reg>; +}; + &pinctrl_1 { hdmi_hpd: hdmi-hpd { samsung,pins = "gpx3-7"; diff --git a/arch/arm/boot/dts/exynos4210.dtsi b/arch/arm/boot/dts/exynos4210.dtsi index be89f83f7..3e5ba665d 100644 --- a/arch/arm/boot/dts/exynos4210.dtsi +++ b/arch/arm/boot/dts/exynos4210.dtsi @@ -40,6 +40,18 @@ device_type = "cpu"; compatible = "arm,cortex-a9"; reg = <0x900>; + clocks = <&clock CLK_ARM_CLK>; + clock-names = "cpu"; + clock-latency = <160000>; + + operating-points = < + 1200000 1250000 + 1000000 1150000 + 800000 1075000 + 500000 975000 + 400000 975000 + 200000 950000 + >; cooling-min-level = <4>; cooling-max-level = <2>; #cooling-cells = <2>; /* min followed by max */ @@ -52,17 +64,7 @@ }; }; - pmu_system_controller: system-controller@10020000 { - clock-names = "clkout0", "clkout1", "clkout2", "clkout3", - "clkout4", "clkout8", "clkout9"; - clocks = <&clock CLK_OUT_DMC>, <&clock CLK_OUT_TOP>, - <&clock CLK_OUT_LEFTBUS>, <&clock CLK_OUT_RIGHTBUS>, - <&clock CLK_OUT_CPU>, <&clock CLK_XXTI>, - <&clock CLK_XUSBXTI>; - #clock-cells = <1>; - }; - - sysram@02020000 { + sysram: sysram@02020000 { compatible = "mmio-sram"; reg = <0x02020000 0x20000>; #address-cells = <1>; @@ -95,19 +97,7 @@ arm,data-latency = <2 2 1>; }; - gic: interrupt-controller@10490000 { - cpu-offset = <0x8000>; - }; - - combiner: interrupt-controller@10440000 { - samsung,combiner-nr = <16>; - interrupts = <0 0 0>, <0 1 0>, <0 2 0>, <0 3 0>, - <0 4 0>, <0 5 0>, <0 6 0>, <0 7 0>, - <0 8 0>, <0 9 0>, <0 10 0>, <0 11 0>, - <0 12 0>, <0 13 0>, <0 14 0>, <0 15 0>; - }; - - mct@10050000 { + mct: mct@10050000 { compatible = "samsung,exynos4210-mct"; reg = <0x10050000 0x800>; interrupt-parent = <&mct_map>; @@ -189,12 +179,13 @@ }; }; - g2d@12800000 { + g2d: g2d@12800000 { compatible = "samsung,s5pv210-g2d"; reg = <0x12800000 0x1000>; interrupts = <0 89 0>; clocks = <&clock CLK_SCLK_FIMG2D>, <&clock CLK_G2D>; clock-names = "sclk_fimg2d", "fimg2d"; + iommus = <&sysmmu_g2d>; status = "disabled"; }; @@ -244,4 +235,47 @@ clock-names = "ppmu"; status = "disabled"; }; + + sysmmu_g2d: sysmmu@12A20000 { + compatible = "samsung,exynos-sysmmu"; + reg = <0x12A20000 0x1000>; + interrupt-parent = <&combiner>; + interrupts = <4 7>; + clock-names = "sysmmu", "master"; + clocks = <&clock CLK_SMMU_G2D>, <&clock CLK_G2D>; + power-domains = <&pd_lcd0>; + #iommu-cells = <0>; + }; + + sysmmu_fimd1: sysmmu@12220000 { + compatible = "samsung,exynos-sysmmu"; + interrupt-parent = <&combiner>; + reg = <0x12220000 0x1000>; + interrupts = <5 3>; + clock-names = "sysmmu", "master"; + clocks = <&clock CLK_SMMU_FIMD1>, <&clock CLK_FIMD1>; + power-domains = <&pd_lcd1>; + #iommu-cells = <0>; + }; +}; + +&gic { + cpu-offset = <0x8000>; +}; + +&combiner { + samsung,combiner-nr = <16>; + interrupts = <0 0 0>, <0 1 0>, <0 2 0>, <0 3 0>, + <0 4 0>, <0 5 0>, <0 6 0>, <0 7 0>, + <0 8 0>, <0 9 0>, <0 10 0>, <0 11 0>, + <0 12 0>, <0 13 0>, <0 14 0>, <0 15 0>; +}; + +&pmu_system_controller { + clock-names = "clkout0", "clkout1", "clkout2", "clkout3", + "clkout4", "clkout8", "clkout9"; + clocks = <&clock CLK_OUT_DMC>, <&clock CLK_OUT_TOP>, + <&clock CLK_OUT_LEFTBUS>, <&clock CLK_OUT_RIGHTBUS>, + <&clock CLK_OUT_CPU>, <&clock CLK_XXTI>, <&clock CLK_XUSBXTI>; + #clock-cells = <1>; }; diff --git a/arch/arm/boot/dts/exynos4212.dtsi b/arch/arm/boot/dts/exynos4212.dtsi index 5be03288f..d9c8efeef 100644 --- a/arch/arm/boot/dts/exynos4212.dtsi +++ b/arch/arm/boot/dts/exynos4212.dtsi @@ -41,12 +41,12 @@ reg = <0xA01>; }; }; +}; - combiner: interrupt-controller@10440000 { - samsung,combiner-nr = <18>; - }; +&combiner { + samsung,combiner-nr = <18>; +}; - gic: interrupt-controller@10490000 { - cpu-offset = <0x8000>; - }; +&gic { + cpu-offset = <0x8000>; }; diff --git a/arch/arm/boot/dts/exynos4412-odroid-common.dtsi b/arch/arm/boot/dts/exynos4412-odroid-common.dtsi index d6b49e5b3..ca7d168d1 100644 --- a/arch/arm/boot/dts/exynos4412-odroid-common.dtsi +++ b/arch/arm/boot/dts/exynos4412-odroid-common.dtsi @@ -38,16 +38,6 @@ }; }; - i2s0: i2s@03830000 { - pinctrl-0 = <&i2s0_bus>; - pinctrl-names = "default"; - status = "okay"; - clocks = <&clock_audss EXYNOS_I2S_BUS>, - <&clock_audss EXYNOS_DOUT_AUD_BUS>, - <&clock_audss EXYNOS_SCLK_I2S>; - clock-names = "iis", "i2s_opclk0", "i2s_opclk1"; - }; - sound: sound { compatible = "simple-audio-card"; assigned-clocks = <&clock_audss EXYNOS_MOUT_AUDSS>, @@ -83,427 +73,437 @@ reset-gpios = <&gpk1 2 1>; }; - mmc@12550000 { - pinctrl-0 = <&sd4_clk &sd4_cmd &sd4_bus4 &sd4_bus8>; - pinctrl-names = "default"; - vmmc-supply = <&ldo20_reg &buck8_reg>; - mmc-pwrseq = <&emmc_pwrseq>; - status = "okay"; - - num-slots = <1>; - broken-cd; - card-detect-delay = <200>; - samsung,dw-mshc-ciu-div = <3>; - samsung,dw-mshc-sdr-timing = <2 3>; - samsung,dw-mshc-ddr-timing = <1 2>; - bus-width = <8>; - cap-mmc-highspeed; - }; - - watchdog@10060000 { - status = "okay"; - }; - - rtc@10070000 { - status = "okay"; - clocks = <&clock CLK_RTC>, <&max77686 MAX77686_CLK_AP>; - clock-names = "rtc", "rtc_src"; - }; - - g2d@10800000 { - status = "okay"; - }; - camera { status = "okay"; pinctrl-names = "default"; pinctrl-0 = <>; + }; - fimc_0: fimc@11800000 { - status = "okay"; - assigned-clocks = <&clock CLK_MOUT_FIMC0>, - <&clock CLK_SCLK_FIMC0>; - assigned-clock-parents = <&clock CLK_MOUT_MPLL_USER_T>; - assigned-clock-rates = <0>, <176000000>; - }; - - fimc_1: fimc@11810000 { - status = "okay"; - assigned-clocks = <&clock CLK_MOUT_FIMC1>, - <&clock CLK_SCLK_FIMC1>; - assigned-clock-parents = <&clock CLK_MOUT_MPLL_USER_T>; - assigned-clock-rates = <0>, <176000000>; + fixed-rate-clocks { + xxti { + compatible = "samsung,clock-xxti"; + clock-frequency = <0>; }; - fimc_2: fimc@11820000 { - status = "okay"; - assigned-clocks = <&clock CLK_MOUT_FIMC2>, - <&clock CLK_SCLK_FIMC2>; - assigned-clock-parents = <&clock CLK_MOUT_MPLL_USER_T>; - assigned-clock-rates = <0>, <176000000>; + xusbxti { + compatible = "samsung,clock-xusbxti"; + clock-frequency = <24000000>; }; + }; - fimc_3: fimc@11830000 { - status = "okay"; - assigned-clocks = <&clock CLK_MOUT_FIMC3>, - <&clock CLK_SCLK_FIMC3>; - assigned-clock-parents = <&clock CLK_MOUT_MPLL_USER_T>; - assigned-clock-rates = <0>, <176000000>; + thermal-zones { + cpu_thermal: cpu-thermal { + cooling-maps { + map0 { + /* Corresponds to 800MHz at freq_table */ + cooling-device = <&cpu0 7 7>; + }; + map1 { + /* Corresponds to 200MHz at freq_table */ + cooling-device = <&cpu0 13 13>; + }; + }; }; }; +}; - sdhci@12530000 { - bus-width = <4>; - pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus4>; - pinctrl-names = "default"; - vmmc-supply = <&ldo4_reg &ldo21_reg>; - cd-gpios = <&gpk2 2 0>; - cd-inverted; - status = "okay"; - }; +/* RSTN signal for eMMC */ +&sd1_cd { + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; +}; - serial@13800000 { - status = "okay"; +&pinctrl_1 { + gpio_power_key: power_key { + samsung,pins = "gpx1-3"; + samsung,pin-pud = <0>; }; - serial@13810000 { - status = "okay"; + max77686_irq: max77686-irq { + samsung,pins = "gpx3-2"; + samsung,pin-function = <0>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; }; - fixed-rate-clocks { - xxti { - compatible = "samsung,clock-xxti"; - clock-frequency = <0>; - }; - - xusbxti { - compatible = "samsung,clock-xusbxti"; - clock-frequency = <24000000>; - }; + hdmi_hpd: hdmi-hpd { + samsung,pins = "gpx3-7"; + samsung,pin-pud = <1>; }; +}; - i2c@13860000 { - pinctrl-0 = <&i2c0_bus>; - pinctrl-names = "default"; - samsung,i2c-sda-delay = <100>; - samsung,i2c-max-bus-freq = <400000>; - status = "okay"; +&ehci { + status = "okay"; +}; - usb3503: usb3503@08 { - compatible = "smsc,usb3503"; - reg = <0x08>; +&exynos_usbphy { + status = "okay"; +}; - intn-gpios = <&gpx3 0 0>; - connect-gpios = <&gpx3 4 0>; - reset-gpios = <&gpx3 5 0>; - initial-mode = <1>; - }; +&fimc_0 { + status = "okay"; + assigned-clocks = <&clock CLK_MOUT_FIMC0>, + <&clock CLK_SCLK_FIMC0>; + assigned-clock-parents = <&clock CLK_MOUT_MPLL_USER_T>; + assigned-clock-rates = <0>, <176000000>; +}; - max77686: pmic@09 { - compatible = "maxim,max77686"; - interrupt-parent = <&gpx3>; - interrupts = <2 0>; - pinctrl-names = "default"; - pinctrl-0 = <&max77686_irq>; - reg = <0x09>; - #clock-cells = <1>; - - voltage-regulators { - ldo1_reg: LDO1 { - regulator-name = "VDD_ALIVE_1.0V"; - regulator-min-microvolt = <1000000>; - regulator-max-microvolt = <1000000>; - regulator-always-on; - }; +&fimc_1 { + status = "okay"; + assigned-clocks = <&clock CLK_MOUT_FIMC1>, + <&clock CLK_SCLK_FIMC1>; + assigned-clock-parents = <&clock CLK_MOUT_MPLL_USER_T>; + assigned-clock-rates = <0>, <176000000>; +}; - ldo2_reg: LDO2 { - regulator-name = "VDDQ_M1_2_1.8V"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-always-on; - }; +&fimc_2 { + status = "okay"; + assigned-clocks = <&clock CLK_MOUT_FIMC2>, + <&clock CLK_SCLK_FIMC2>; + assigned-clock-parents = <&clock CLK_MOUT_MPLL_USER_T>; + assigned-clock-rates = <0>, <176000000>; +}; - ldo3_reg: LDO3 { - regulator-name = "VDDQ_EXT_1.8V"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-always-on; - }; +&fimc_3 { + status = "okay"; + assigned-clocks = <&clock CLK_MOUT_FIMC3>, + <&clock CLK_SCLK_FIMC3>; + assigned-clock-parents = <&clock CLK_MOUT_MPLL_USER_T>; + assigned-clock-rates = <0>, <176000000>; +}; - ldo4_reg: LDO4 { - regulator-name = "VDDQ_MMC2_2.8V"; - regulator-min-microvolt = <2800000>; - regulator-max-microvolt = <2800000>; - regulator-always-on; - regulator-boot-on; - }; +&g2d { + status = "okay"; +}; - ldo5_reg: LDO5 { - regulator-name = "VDDQ_MMC1_3_1.8V"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-always-on; - regulator-boot-on; - }; +&hdmi { + hpd-gpio = <&gpx3 7 0>; + pinctrl-names = "default"; + pinctrl-0 = <&hdmi_hpd>; + vdd-supply = <&ldo8_reg>; + vdd_osc-supply = <&ldo10_reg>; + vdd_pll-supply = <&ldo8_reg>; + ddc = <&i2c_2>; + status = "okay"; +}; - ldo6_reg: LDO6 { - regulator-name = "VDD10_MPLL_1.0V"; - regulator-min-microvolt = <1000000>; - regulator-max-microvolt = <1000000>; - regulator-always-on; - }; +&hsotg { + dr_mode = "peripheral"; + status = "okay"; + vusb_d-supply = <&ldo15_reg>; + vusb_a-supply = <&ldo12_reg>; +}; - ldo7_reg: LDO7 { - regulator-name = "VDD10_XPLL_1.0V"; - regulator-min-microvolt = <1000000>; - regulator-max-microvolt = <1000000>; - regulator-always-on; - }; +&i2c_0 { + pinctrl-0 = <&i2c0_bus>; + pinctrl-names = "default"; + samsung,i2c-sda-delay = <100>; + samsung,i2c-max-bus-freq = <400000>; + status = "okay"; + + usb3503: usb3503@08 { + compatible = "smsc,usb3503"; + reg = <0x08>; + + intn-gpios = <&gpx3 0 0>; + connect-gpios = <&gpx3 4 0>; + reset-gpios = <&gpx3 5 0>; + initial-mode = <1>; + }; - ldo8_reg: ldo@8 { - regulator-compatible = "LDO8"; - regulator-name = "VDD10_HDMI_1.0V"; - regulator-min-microvolt = <1000000>; - regulator-max-microvolt = <1000000>; - }; + max77686: pmic@09 { + compatible = "maxim,max77686"; + interrupt-parent = <&gpx3>; + interrupts = <2 0>; + pinctrl-names = "default"; + pinctrl-0 = <&max77686_irq>; + reg = <0x09>; + #clock-cells = <1>; + + voltage-regulators { + ldo1_reg: LDO1 { + regulator-name = "VDD_ALIVE_1.0V"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-always-on; + }; - ldo10_reg: ldo@10 { - regulator-compatible = "LDO10"; - regulator-name = "VDDQ_MIPIHSI_1.8V"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; + ldo2_reg: LDO2 { + regulator-name = "VDDQ_M1_2_1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; - ldo11_reg: LDO11 { - regulator-name = "VDD18_ABB1_1.8V"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-always-on; - }; + ldo3_reg: LDO3 { + regulator-name = "VDDQ_EXT_1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; - ldo12_reg: LDO12 { - regulator-name = "VDD33_USB_3.3V"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - regulator-boot-on; - }; + ldo4_reg: LDO4 { + regulator-name = "VDDQ_MMC2_2.8V"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-always-on; + regulator-boot-on; + }; - ldo13_reg: LDO13 { - regulator-name = "VDDQ_C2C_W_1.8V"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-always-on; - regulator-boot-on; - }; + ldo5_reg: LDO5 { + regulator-name = "VDDQ_MMC1_3_1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + }; - ldo14_reg: LDO14 { - regulator-name = "VDD18_ABB0_2_1.8V"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-always-on; - regulator-boot-on; - }; + ldo6_reg: LDO6 { + regulator-name = "VDD10_MPLL_1.0V"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-always-on; + }; - ldo15_reg: LDO15 { - regulator-name = "VDD10_HSIC_1.0V"; - regulator-min-microvolt = <1000000>; - regulator-max-microvolt = <1000000>; - regulator-always-on; - regulator-boot-on; - }; + ldo7_reg: LDO7 { + regulator-name = "VDD10_XPLL_1.0V"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-always-on; + }; - ldo16_reg: LDO16 { - regulator-name = "VDD18_HSIC_1.8V"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-always-on; - regulator-boot-on; - }; + ldo8_reg: ldo@8 { + regulator-compatible = "LDO8"; + regulator-name = "VDD10_HDMI_1.0V"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + }; - ldo20_reg: LDO20 { - regulator-name = "LDO20_1.8V"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-boot-on; - }; + ldo10_reg: ldo@10 { + regulator-compatible = "LDO10"; + regulator-name = "VDDQ_MIPIHSI_1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; - ldo21_reg: LDO21 { - regulator-name = "LDO21_3.3V"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - regulator-boot-on; - }; + ldo11_reg: LDO11 { + regulator-name = "VDD18_ABB1_1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; - ldo25_reg: LDO25 { - regulator-name = "VDDQ_LCD_1.8V"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-always-on; - regulator-boot-on; - }; + ldo12_reg: LDO12 { + regulator-name = "VDD33_USB_3.3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-boot-on; + }; - buck1_reg: BUCK1 { - regulator-name = "vdd_mif"; - regulator-min-microvolt = <1000000>; - regulator-max-microvolt = <1000000>; - regulator-always-on; - regulator-boot-on; - }; + ldo13_reg: LDO13 { + regulator-name = "VDDQ_C2C_W_1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + }; - buck2_reg: BUCK2 { - regulator-name = "vdd_arm"; - regulator-min-microvolt = <900000>; - regulator-max-microvolt = <1350000>; - regulator-always-on; - regulator-boot-on; - }; + ldo14_reg: LDO14 { + regulator-name = "VDD18_ABB0_2_1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + }; - buck3_reg: BUCK3 { - regulator-name = "vdd_int"; - regulator-min-microvolt = <1000000>; - regulator-max-microvolt = <1000000>; - regulator-always-on; - regulator-boot-on; - }; + ldo15_reg: LDO15 { + regulator-name = "VDD10_HSIC_1.0V"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-always-on; + regulator-boot-on; + }; - buck4_reg: BUCK4 { - regulator-name = "vdd_g3d"; - regulator-min-microvolt = <900000>; - regulator-max-microvolt = <1100000>; - regulator-microvolt-offset = <50000>; - }; + ldo16_reg: LDO16 { + regulator-name = "VDD18_HSIC_1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + }; - buck5_reg: BUCK5 { - regulator-name = "VDDQ_CKEM1_2_1.2V"; - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1200000>; - regulator-always-on; - regulator-boot-on; - }; + ldo20_reg: LDO20 { + regulator-name = "LDO20_1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + }; - buck6_reg: BUCK6 { - regulator-name = "BUCK6_1.35V"; - regulator-min-microvolt = <1350000>; - regulator-max-microvolt = <1350000>; - regulator-always-on; - regulator-boot-on; - }; + ldo21_reg: LDO21 { + regulator-name = "LDO21_3.3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-boot-on; + }; - buck7_reg: BUCK7 { - regulator-name = "BUCK7_2.0V"; - regulator-min-microvolt = <2000000>; - regulator-max-microvolt = <2000000>; - regulator-always-on; - }; + ldo25_reg: LDO25 { + regulator-name = "VDDQ_LCD_1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + }; - buck8_reg: BUCK8 { - regulator-name = "BUCK8_2.8V"; - regulator-min-microvolt = <2800000>; - regulator-max-microvolt = <2800000>; - }; + buck1_reg: BUCK1 { + regulator-name = "vdd_mif"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-always-on; + regulator-boot-on; }; - }; - }; - i2c@13870000 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c1_bus>; - status = "okay"; - max98090: max98090@10 { - compatible = "maxim,max98090"; - reg = <0x10>; - interrupt-parent = <&gpx0>; - interrupts = <0 0>; - clocks = <&i2s0 CLK_I2S_CDCLK>; - clock-names = "mclk"; - #sound-dai-cells = <0>; - }; - }; + buck2_reg: BUCK2 { + regulator-name = "vdd_arm"; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <1350000>; + regulator-always-on; + regulator-boot-on; + }; - exynos-usbphy@125B0000 { - status = "okay"; - }; + buck3_reg: BUCK3 { + regulator-name = "vdd_int"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-always-on; + regulator-boot-on; + }; - hsotg@12480000 { - dr_mode = "peripheral"; - status = "okay"; - vusb_d-supply = <&ldo15_reg>; - vusb_a-supply = <&ldo12_reg>; - }; + buck4_reg: BUCK4 { + regulator-name = "vdd_g3d"; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <1100000>; + regulator-microvolt-offset = <50000>; + }; - ehci: ehci@12580000 { - status = "okay"; - }; + buck5_reg: BUCK5 { + regulator-name = "VDDQ_CKEM1_2_1.2V"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + regulator-boot-on; + }; - tmu@100C0000 { - vtmu-supply = <&ldo10_reg>; - status = "okay"; - }; + buck6_reg: BUCK6 { + regulator-name = "BUCK6_1.35V"; + regulator-min-microvolt = <1350000>; + regulator-max-microvolt = <1350000>; + regulator-always-on; + regulator-boot-on; + }; - thermal-zones { - cpu_thermal: cpu-thermal { - cooling-maps { - map0 { - /* Corresponds to 800MHz at freq_table */ - cooling-device = <&cpu0 7 7>; - }; - map1 { - /* Corresponds to 200MHz at freq_table */ - cooling-device = <&cpu0 13 13>; - }; - }; + buck7_reg: BUCK7 { + regulator-name = "BUCK7_2.0V"; + regulator-min-microvolt = <2000000>; + regulator-max-microvolt = <2000000>; + regulator-always-on; + }; + + buck8_reg: BUCK8 { + regulator-name = "BUCK8_2.8V"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + }; }; }; +}; - mixer: mixer@12C10000 { - status = "okay"; +&i2c_1 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_bus>; + status = "okay"; + max98090: max98090@10 { + compatible = "maxim,max98090"; + reg = <0x10>; + interrupt-parent = <&gpx0>; + interrupts = <0 0>; + clocks = <&i2s0 CLK_I2S_CDCLK>; + clock-names = "mclk"; + #sound-dai-cells = <0>; }; +}; - hdmi@12D00000 { - hpd-gpio = <&gpx3 7 0>; - pinctrl-names = "default"; - pinctrl-0 = <&hdmi_hpd>; - vdd-supply = <&ldo8_reg>; - vdd_osc-supply = <&ldo10_reg>; - vdd_pll-supply = <&ldo8_reg>; - ddc = <&hdmi_ddc>; - status = "okay"; - }; +&i2c_2 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&i2c2_bus>; +}; - hdmi_ddc: i2c@13880000 { - status = "okay"; - pinctrl-names = "default"; - pinctrl-0 = <&i2c2_bus>; - }; +&i2c_8 { + status = "okay"; +}; - i2c@138E0000 { - status = "okay"; - }; +&i2s0 { + pinctrl-0 = <&i2s0_bus>; + pinctrl-names = "default"; + status = "okay"; + clocks = <&clock_audss EXYNOS_I2S_BUS>, + <&clock_audss EXYNOS_DOUT_AUD_BUS>, + <&clock_audss EXYNOS_SCLK_I2S>; + clock-names = "iis", "i2s_opclk0", "i2s_opclk1"; }; -/* RSTN signal for eMMC */ -&sd1_cd { - samsung,pin-pud = <0>; - samsung,pin-drv = <0>; +&mixer { + status = "okay"; }; -&pinctrl_1 { - gpio_power_key: power_key { - samsung,pins = "gpx1-3"; - samsung,pin-pud = <0>; - }; +&mshc_0 { + pinctrl-0 = <&sd4_clk &sd4_cmd &sd4_bus4 &sd4_bus8>; + pinctrl-names = "default"; + vmmc-supply = <&ldo20_reg &buck8_reg>; + mmc-pwrseq = <&emmc_pwrseq>; + status = "okay"; + + num-slots = <1>; + broken-cd; + card-detect-delay = <200>; + samsung,dw-mshc-ciu-div = <3>; + samsung,dw-mshc-sdr-timing = <2 3>; + samsung,dw-mshc-ddr-timing = <1 2>; + bus-width = <8>; + cap-mmc-highspeed; +}; - max77686_irq: max77686-irq { - samsung,pins = "gpx3-2"; - samsung,pin-function = <0>; - samsung,pin-pud = <0>; - samsung,pin-drv = <0>; - }; +&rtc { + status = "okay"; + clocks = <&clock CLK_RTC>, <&max77686 MAX77686_CLK_AP>; + clock-names = "rtc", "rtc_src"; +}; - hdmi_hpd: hdmi-hpd { - samsung,pins = "gpx3-7"; - samsung,pin-pud = <1>; - }; +&sdhci_2 { + bus-width = <4>; + pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus4>; + pinctrl-names = "default"; + vmmc-supply = <&ldo4_reg &ldo21_reg>; + cd-gpios = <&gpk2 2 0>; + cd-inverted; + status = "okay"; +}; + +&serial_0 { + status = "okay"; +}; + +&serial_1 { + status = "okay"; +}; + +&tmu { + vtmu-supply = <&ldo10_reg>; + status = "okay"; +}; + +&watchdog { + status = "okay"; }; diff --git a/arch/arm/boot/dts/exynos4412-odroidx.dts b/arch/arm/boot/dts/exynos4412-odroidx.dts index cb1cfe723..679ac103e 100644 --- a/arch/arm/boot/dts/exynos4412-odroidx.dts +++ b/arch/arm/boot/dts/exynos4412-odroidx.dts @@ -38,14 +38,6 @@ }; }; - serial@13820000 { - status = "okay"; - }; - - serial@13830000 { - status = "okay"; - }; - gpio_keys { pinctrl-0 = <&gpio_power_key &gpio_home_key>; @@ -83,3 +75,11 @@ samsung,pin-pud = <0>; }; }; + +&serial_2 { + status = "okay"; +}; + +&serial_3 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/exynos4412-origen.dts b/arch/arm/boot/dts/exynos4412-origen.dts index bd8b73077..84c76310b 100644 --- a/arch/arm/boot/dts/exynos4412-origen.dts +++ b/arch/arm/boot/dts/exynos4412-origen.dts @@ -50,485 +50,485 @@ }; }; - watchdog@10060000 { - status = "okay"; - }; - - rtc@10070000 { - status = "okay"; + display-timings { + native-mode = <&timing0>; + timing0: timing { + clock-frequency = <47500000>; + hactive = <1024>; + vactive = <600>; + hfront-porch = <64>; + hback-porch = <16>; + hsync-len = <48>; + vback-porch = <64>; + vfront-porch = <16>; + vsync-len = <3>; + }; }; - pinctrl@11000000 { - keypad_rows: keypad-rows { - samsung,pins = "gpx2-0", "gpx2-1", "gpx2-2"; - samsung,pin-function = <3>; - samsung,pin-pud = <3>; - samsung,pin-drv = <0>; + fixed-rate-clocks { + xxti { + compatible = "samsung,clock-xxti"; + clock-frequency = <0>; }; - keypad_cols: keypad-cols { - samsung,pins = "gpx1-0", "gpx1-1"; - samsung,pin-function = <3>; - samsung,pin-pud = <0>; - samsung,pin-drv = <0>; + xusbxti { + compatible = "samsung,clock-xusbxti"; + clock-frequency = <24000000>; }; }; +}; - keypad@100A0000 { - samsung,keypad-num-rows = <3>; - samsung,keypad-num-columns = <2>; - linux,keypad-no-autorepeat; - linux,keypad-wakeup; - pinctrl-0 = <&keypad_rows &keypad_cols>; - pinctrl-names = "default"; - status = "okay"; - - key_home { - keypad,row = <0>; - keypad,column = <0>; - linux,code = <KEY_HOME>; - }; +&fimd { + pinctrl-0 = <&lcd_clk &lcd_data24 &pwm1_out>; + pinctrl-names = "default"; + status = "okay"; +}; - key_down { - keypad,row = <0>; - keypad,column = <1>; - linux,code = <KEY_DOWN>; - }; +&g2d { + status = "okay"; +}; - key_up { - keypad,row = <1>; - keypad,column = <0>; - linux,code = <KEY_UP>; - }; +&i2c_0 { + #address-cells = <1>; + #size-cells = <0>; + samsung,i2c-sda-delay = <100>; + samsung,i2c-max-bus-freq = <20000>; + pinctrl-0 = <&i2c0_bus>; + pinctrl-names = "default"; + status = "okay"; + + s5m8767_pmic@66 { + compatible = "samsung,s5m8767-pmic"; + reg = <0x66>; + + s5m8767,pmic-buck-default-dvs-idx = <3>; + + s5m8767,pmic-buck-dvs-gpios = <&gpx2 3 0>, + <&gpx2 4 0>, + <&gpx2 5 0>; + + s5m8767,pmic-buck-ds-gpios = <&gpm3 5 0>, + <&gpm3 6 0>, + <&gpm3 7 0>; + + s5m8767,pmic-buck2-dvs-voltage = <1250000>, <1200000>, + <1200000>, <1200000>, + <1200000>, <1200000>, + <1200000>, <1200000>; + + s5m8767,pmic-buck3-dvs-voltage = <1100000>, <1100000>, + <1100000>, <1100000>, + <1100000>, <1100000>, + <1100000>, <1100000>; + + s5m8767,pmic-buck4-dvs-voltage = <1200000>, <1200000>, + <1200000>, <1200000>, + <1200000>, <1200000>, + <1200000>, <1200000>; + + regulators { + ldo1_reg: LDO1 { + regulator-name = "VDD_ALIVE"; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + regulator-always-on; + regulator-boot-on; + op_mode = <1>; /* Normal Mode */ + }; - key_menu { - keypad,row = <1>; - keypad,column = <1>; - linux,code = <KEY_MENU>; - }; + ldo2_reg: LDO2 { + regulator-name = "VDDQ_M12"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + op_mode = <1>; /* Normal Mode */ + }; - key_back { - keypad,row = <2>; - keypad,column = <0>; - linux,code = <KEY_BACK>; - }; + ldo3_reg: LDO3 { + regulator-name = "VDDIOAP_18"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + op_mode = <1>; /* Normal Mode */ + }; + + ldo4_reg: LDO4 { + regulator-name = "VDDQ_PRE"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + op_mode = <1>; /* Normal Mode */ + }; + + ldo5_reg: LDO5 { + regulator-name = "VDD18_2M"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + op_mode = <1>; /* Normal Mode */ + }; + + ldo6_reg: LDO6 { + regulator-name = "VDD10_MPLL"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-always-on; + op_mode = <1>; /* Normal Mode */ + }; + + ldo7_reg: LDO7 { + regulator-name = "VDD10_XPLL"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-always-on; + op_mode = <1>; /* Normal Mode */ + }; + + ldo8_reg: LDO8 { + regulator-name = "VDD10_MIPI"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-always-on; + op_mode = <1>; /* Normal Mode */ + }; + + ldo9_reg: LDO9 { + regulator-name = "VDD33_LCD"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + op_mode = <1>; /* Normal Mode */ + }; + + ldo10_reg: LDO10 { + regulator-name = "VDD18_MIPI"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + op_mode = <1>; /* Normal Mode */ + }; + + ldo11_reg: LDO11 { + regulator-name = "VDD18_ABB1"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + op_mode = <1>; /* Normal Mode */ + }; + + ldo12_reg: LDO12 { + regulator-name = "VDD33_UOTG"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + op_mode = <1>; /* Normal Mode */ + }; + + ldo13_reg: LDO13 { + regulator-name = "VDDIOPERI_18"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + op_mode = <1>; /* Normal Mode */ + }; + + ldo14_reg: LDO14 { + regulator-name = "VDD18_ABB02"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + op_mode = <1>; /* Normal Mode */ + }; + + ldo15_reg: LDO15 { + regulator-name = "VDD10_USH"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-always-on; + op_mode = <1>; /* Normal Mode */ + }; + + ldo16_reg: LDO16 { + regulator-name = "VDD18_HSIC"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + op_mode = <1>; /* Normal Mode */ + }; + + ldo17_reg: LDO17 { + regulator-name = "VDDIOAP_MMC012_28"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-always-on; + op_mode = <1>; /* Normal Mode */ + }; + + ldo18_reg: LDO18 { + regulator-name = "VDDIOPERI_28"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-always-on; + op_mode = <1>; /* Normal Mode */ + }; + + ldo19_reg: LDO19 { + regulator-name = "DVDD25"; + regulator-min-microvolt = <2500000>; + regulator-max-microvolt = <2500000>; + regulator-always-on; + op_mode = <1>; /* Normal Mode */ + }; + + ldo20_reg: LDO20 { + regulator-name = "VDD28_CAM"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-always-on; + op_mode = <1>; /* Normal Mode */ + }; + + ldo21_reg: LDO21 { + regulator-name = "VDD28_AF"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-always-on; + op_mode = <1>; /* Normal Mode */ + }; + + ldo22_reg: LDO22 { + regulator-name = "VDDA28_2M"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-always-on; + op_mode = <1>; /* Normal Mode */ + }; - key_enter { - keypad,row = <2>; - keypad,column = <1>; - linux,code = <KEY_ENTER>; + ldo23_reg: LDO23 { + regulator-name = "VDD28_TF"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-always-on; + op_mode = <1>; /* Normal Mode */ + }; + + ldo24_reg: LDO24 { + regulator-name = "VDD33_A31"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + op_mode = <1>; /* Normal Mode */ + }; + + ldo25_reg: LDO25 { + regulator-name = "VDD18_CAM"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + op_mode = <1>; /* Normal Mode */ + }; + + ldo26_reg: LDO26 { + regulator-name = "VDD18_A31"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + op_mode = <1>; /* Normal Mode */ + }; + + ldo27_reg: LDO27 { + regulator-name = "GPS_1V8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + op_mode = <1>; /* Normal Mode */ + }; + + ldo28_reg: LDO28 { + regulator-name = "DVDD12"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + op_mode = <1>; /* Normal Mode */ + }; + + buck1_reg: BUCK1 { + regulator-name = "vdd_mif"; + regulator-min-microvolt = <950000>; + regulator-max-microvolt = <1100000>; + regulator-always-on; + regulator-boot-on; + op_mode = <1>; /* Normal Mode */ + }; + + buck2_reg: BUCK2 { + regulator-name = "vdd_arm"; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <1350000>; + regulator-always-on; + regulator-boot-on; + op_mode = <1>; /* Normal Mode */ + }; + + buck3_reg: BUCK3 { + regulator-name = "vdd_int"; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + regulator-boot-on; + op_mode = <1>; /* Normal Mode */ + }; + + buck4_reg: BUCK4 { + regulator-name = "vdd_g3d"; + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <1500000>; + regulator-always-on; + regulator-boot-on; + op_mode = <1>; /* Normal Mode */ + }; + + buck5_reg: BUCK5 { + regulator-name = "vdd_m12"; + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <1500000>; + regulator-always-on; + regulator-boot-on; + op_mode = <1>; /* Normal Mode */ + }; + + buck6_reg: BUCK6 { + regulator-name = "vdd12_5m"; + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <1500000>; + regulator-always-on; + regulator-boot-on; + op_mode = <1>; /* Normal Mode */ + }; + + buck9_reg: BUCK9 { + regulator-name = "vddf28_emmc"; + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <3000000>; + regulator-always-on; + regulator-boot-on; + op_mode = <1>; /* Normal Mode */ + }; }; }; +}; - g2d@10800000 { - status = "okay"; +&keypad { + samsung,keypad-num-rows = <3>; + samsung,keypad-num-columns = <2>; + linux,keypad-no-autorepeat; + linux,keypad-wakeup; + pinctrl-0 = <&keypad_rows &keypad_cols>; + pinctrl-names = "default"; + status = "okay"; + + key_home { + keypad,row = <0>; + keypad,column = <0>; + linux,code = <KEY_HOME>; }; - sdhci@12530000 { - bus-width = <4>; - pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_bus4 &sd2_cd>; - pinctrl-names = "default"; - vmmc-supply = <&mmc_reg>; - status = "okay"; + key_down { + keypad,row = <0>; + keypad,column = <1>; + linux,code = <KEY_DOWN>; }; - mmc@12550000 { - pinctrl-0 = <&sd4_clk &sd4_cmd &sd4_bus4 &sd4_bus8>; - pinctrl-names = "default"; - status = "okay"; - - num-slots = <1>; - broken-cd; - card-detect-delay = <200>; - samsung,dw-mshc-ciu-div = <3>; - samsung,dw-mshc-sdr-timing = <2 3>; - samsung,dw-mshc-ddr-timing = <1 2>; - bus-width = <8>; - cap-mmc-highspeed; + key_up { + keypad,row = <1>; + keypad,column = <0>; + linux,code = <KEY_UP>; }; - codec@13400000 { - samsung,mfc-r = <0x43000000 0x800000>; - samsung,mfc-l = <0x51000000 0x800000>; - status = "okay"; + key_menu { + keypad,row = <1>; + keypad,column = <1>; + linux,code = <KEY_MENU>; }; - fimd@11c00000 { - pinctrl-0 = <&lcd_clk &lcd_data24 &pwm1_out>; - pinctrl-names = "default"; - status = "okay"; + key_back { + keypad,row = <2>; + keypad,column = <0>; + linux,code = <KEY_BACK>; }; - display-timings { - native-mode = <&timing0>; - timing0: timing { - clock-frequency = <47500000>; - hactive = <1024>; - vactive = <600>; - hfront-porch = <64>; - hback-porch = <16>; - hsync-len = <48>; - vback-porch = <64>; - vfront-porch = <16>; - vsync-len = <3>; - }; + key_enter { + keypad,row = <2>; + keypad,column = <1>; + linux,code = <KEY_ENTER>; }; +}; - serial@13800000 { - status = "okay"; - }; +&mfc { + samsung,mfc-r = <0x43000000 0x800000>; + samsung,mfc-l = <0x51000000 0x800000>; + status = "okay"; +}; - serial@13810000 { - status = "okay"; - }; +&mshc_0 { + pinctrl-0 = <&sd4_clk &sd4_cmd &sd4_bus4 &sd4_bus8>; + pinctrl-names = "default"; + status = "okay"; + + num-slots = <1>; + broken-cd; + card-detect-delay = <200>; + samsung,dw-mshc-ciu-div = <3>; + samsung,dw-mshc-sdr-timing = <2 3>; + samsung,dw-mshc-ddr-timing = <1 2>; + bus-width = <8>; + cap-mmc-highspeed; +}; - serial@13820000 { - status = "okay"; +&pinctrl_1 { + keypad_rows: keypad-rows { + samsung,pins = "gpx2-0", "gpx2-1", "gpx2-2"; + samsung,pin-function = <3>; + samsung,pin-pud = <3>; + samsung,pin-drv = <0>; }; - serial@13830000 { - status = "okay"; + keypad_cols: keypad-cols { + samsung,pins = "gpx1-0", "gpx1-1"; + samsung,pin-function = <3>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; }; +}; - i2c@13860000 { - #address-cells = <1>; - #size-cells = <0>; - samsung,i2c-sda-delay = <100>; - samsung,i2c-max-bus-freq = <20000>; - pinctrl-0 = <&i2c0_bus>; - pinctrl-names = "default"; - status = "okay"; - - s5m8767_pmic@66 { - compatible = "samsung,s5m8767-pmic"; - reg = <0x66>; - - s5m8767,pmic-buck-default-dvs-idx = <3>; - - s5m8767,pmic-buck-dvs-gpios = <&gpx2 3 0>, - <&gpx2 4 0>, - <&gpx2 5 0>; - - s5m8767,pmic-buck-ds-gpios = <&gpm3 5 0>, - <&gpm3 6 0>, - <&gpm3 7 0>; - - s5m8767,pmic-buck2-dvs-voltage = <1250000>, <1200000>, - <1200000>, <1200000>, - <1200000>, <1200000>, - <1200000>, <1200000>; - - s5m8767,pmic-buck3-dvs-voltage = <1100000>, <1100000>, - <1100000>, <1100000>, - <1100000>, <1100000>, - <1100000>, <1100000>; - - s5m8767,pmic-buck4-dvs-voltage = <1200000>, <1200000>, - <1200000>, <1200000>, - <1200000>, <1200000>, - <1200000>, <1200000>; - - regulators { - ldo1_reg: LDO1 { - regulator-name = "VDD_ALIVE"; - regulator-min-microvolt = <1100000>; - regulator-max-microvolt = <1100000>; - regulator-always-on; - regulator-boot-on; - op_mode = <1>; /* Normal Mode */ - }; - - ldo2_reg: LDO2 { - regulator-name = "VDDQ_M12"; - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1200000>; - regulator-always-on; - op_mode = <1>; /* Normal Mode */ - }; - - ldo3_reg: LDO3 { - regulator-name = "VDDIOAP_18"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-always-on; - op_mode = <1>; /* Normal Mode */ - }; - - ldo4_reg: LDO4 { - regulator-name = "VDDQ_PRE"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-always-on; - op_mode = <1>; /* Normal Mode */ - }; - - ldo5_reg: LDO5 { - regulator-name = "VDD18_2M"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-always-on; - op_mode = <1>; /* Normal Mode */ - }; - - ldo6_reg: LDO6 { - regulator-name = "VDD10_MPLL"; - regulator-min-microvolt = <1000000>; - regulator-max-microvolt = <1000000>; - regulator-always-on; - op_mode = <1>; /* Normal Mode */ - }; - - ldo7_reg: LDO7 { - regulator-name = "VDD10_XPLL"; - regulator-min-microvolt = <1000000>; - regulator-max-microvolt = <1000000>; - regulator-always-on; - op_mode = <1>; /* Normal Mode */ - }; - - ldo8_reg: LDO8 { - regulator-name = "VDD10_MIPI"; - regulator-min-microvolt = <1000000>; - regulator-max-microvolt = <1000000>; - regulator-always-on; - op_mode = <1>; /* Normal Mode */ - }; - - ldo9_reg: LDO9 { - regulator-name = "VDD33_LCD"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - op_mode = <1>; /* Normal Mode */ - }; - - ldo10_reg: LDO10 { - regulator-name = "VDD18_MIPI"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-always-on; - op_mode = <1>; /* Normal Mode */ - }; - - ldo11_reg: LDO11 { - regulator-name = "VDD18_ABB1"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-always-on; - op_mode = <1>; /* Normal Mode */ - }; - - ldo12_reg: LDO12 { - regulator-name = "VDD33_UOTG"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - op_mode = <1>; /* Normal Mode */ - }; - - ldo13_reg: LDO13 { - regulator-name = "VDDIOPERI_18"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-always-on; - op_mode = <1>; /* Normal Mode */ - }; - - ldo14_reg: LDO14 { - regulator-name = "VDD18_ABB02"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-always-on; - op_mode = <1>; /* Normal Mode */ - }; - - ldo15_reg: LDO15 { - regulator-name = "VDD10_USH"; - regulator-min-microvolt = <1000000>; - regulator-max-microvolt = <1000000>; - regulator-always-on; - op_mode = <1>; /* Normal Mode */ - }; - - ldo16_reg: LDO16 { - regulator-name = "VDD18_HSIC"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-always-on; - op_mode = <1>; /* Normal Mode */ - }; - - ldo17_reg: LDO17 { - regulator-name = "VDDIOAP_MMC012_28"; - regulator-min-microvolt = <2800000>; - regulator-max-microvolt = <2800000>; - regulator-always-on; - op_mode = <1>; /* Normal Mode */ - }; - - ldo18_reg: LDO18 { - regulator-name = "VDDIOPERI_28"; - regulator-min-microvolt = <2800000>; - regulator-max-microvolt = <2800000>; - regulator-always-on; - op_mode = <1>; /* Normal Mode */ - }; - - ldo19_reg: LDO19 { - regulator-name = "DVDD25"; - regulator-min-microvolt = <2500000>; - regulator-max-microvolt = <2500000>; - regulator-always-on; - op_mode = <1>; /* Normal Mode */ - }; - - ldo20_reg: LDO20 { - regulator-name = "VDD28_CAM"; - regulator-min-microvolt = <2800000>; - regulator-max-microvolt = <2800000>; - regulator-always-on; - op_mode = <1>; /* Normal Mode */ - }; - - ldo21_reg: LDO21 { - regulator-name = "VDD28_AF"; - regulator-min-microvolt = <2800000>; - regulator-max-microvolt = <2800000>; - regulator-always-on; - op_mode = <1>; /* Normal Mode */ - }; - - ldo22_reg: LDO22 { - regulator-name = "VDDA28_2M"; - regulator-min-microvolt = <2800000>; - regulator-max-microvolt = <2800000>; - regulator-always-on; - op_mode = <1>; /* Normal Mode */ - }; - - ldo23_reg: LDO23 { - regulator-name = "VDD28_TF"; - regulator-min-microvolt = <2800000>; - regulator-max-microvolt = <2800000>; - regulator-always-on; - op_mode = <1>; /* Normal Mode */ - }; - - ldo24_reg: LDO24 { - regulator-name = "VDD33_A31"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - op_mode = <1>; /* Normal Mode */ - }; - - ldo25_reg: LDO25 { - regulator-name = "VDD18_CAM"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-always-on; - op_mode = <1>; /* Normal Mode */ - }; - - ldo26_reg: LDO26 { - regulator-name = "VDD18_A31"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-always-on; - op_mode = <1>; /* Normal Mode */ - }; - - ldo27_reg: LDO27 { - regulator-name = "GPS_1V8"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-always-on; - op_mode = <1>; /* Normal Mode */ - }; - - ldo28_reg: LDO28 { - regulator-name = "DVDD12"; - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1200000>; - regulator-always-on; - op_mode = <1>; /* Normal Mode */ - }; - - buck1_reg: BUCK1 { - regulator-name = "vdd_mif"; - regulator-min-microvolt = <950000>; - regulator-max-microvolt = <1100000>; - regulator-always-on; - regulator-boot-on; - op_mode = <1>; /* Normal Mode */ - }; - - buck2_reg: BUCK2 { - regulator-name = "vdd_arm"; - regulator-min-microvolt = <900000>; - regulator-max-microvolt = <1350000>; - regulator-always-on; - regulator-boot-on; - op_mode = <1>; /* Normal Mode */ - }; - - buck3_reg: BUCK3 { - regulator-name = "vdd_int"; - regulator-min-microvolt = <900000>; - regulator-max-microvolt = <1200000>; - regulator-always-on; - regulator-boot-on; - op_mode = <1>; /* Normal Mode */ - }; - - buck4_reg: BUCK4 { - regulator-name = "vdd_g3d"; - regulator-min-microvolt = <750000>; - regulator-max-microvolt = <1500000>; - regulator-always-on; - regulator-boot-on; - op_mode = <1>; /* Normal Mode */ - }; - - buck5_reg: BUCK5 { - regulator-name = "vdd_m12"; - regulator-min-microvolt = <750000>; - regulator-max-microvolt = <1500000>; - regulator-always-on; - regulator-boot-on; - op_mode = <1>; /* Normal Mode */ - }; - - buck6_reg: BUCK6 { - regulator-name = "vdd12_5m"; - regulator-min-microvolt = <750000>; - regulator-max-microvolt = <1500000>; - regulator-always-on; - regulator-boot-on; - op_mode = <1>; /* Normal Mode */ - }; - - buck9_reg: BUCK9 { - regulator-name = "vddf28_emmc"; - regulator-min-microvolt = <750000>; - regulator-max-microvolt = <3000000>; - regulator-always-on; - regulator-boot-on; - op_mode = <1>; /* Normal Mode */ - }; - }; - }; - }; +&rtc { + status = "okay"; +}; - fixed-rate-clocks { - xxti { - compatible = "samsung,clock-xxti"; - clock-frequency = <0>; - }; +&sdhci_2 { + bus-width = <4>; + pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_bus4 &sd2_cd>; + pinctrl-names = "default"; + vmmc-supply = <&mmc_reg>; + status = "okay"; +}; - xusbxti { - compatible = "samsung,clock-xusbxti"; - clock-frequency = <24000000>; - }; - }; +&serial_0 { + status = "okay"; +}; + +&serial_1 { + status = "okay"; +}; + +&serial_2 { + status = "okay"; +}; + +&serial_3 { + status = "okay"; +}; + +&watchdog { + status = "okay"; }; diff --git a/arch/arm/boot/dts/exynos4412-smdk4412.dts b/arch/arm/boot/dts/exynos4412-smdk4412.dts index b9256afbc..c2421df1f 100644 --- a/arch/arm/boot/dts/exynos4412-smdk4412.dts +++ b/arch/arm/boot/dts/exynos4412-smdk4412.dts @@ -28,135 +28,135 @@ stdout-path = &serial_1; }; - g2d@10800000 { - status = "okay"; - }; - - pinctrl@11000000 { - keypad_rows: keypad-rows { - samsung,pins = "gpx2-0", "gpx2-1", "gpx2-2"; - samsung,pin-function = <3>; - samsung,pin-pud = <3>; - samsung,pin-drv = <0>; + fixed-rate-clocks { + xxti { + compatible = "samsung,clock-xxti"; + clock-frequency = <0>; }; - keypad_cols: keypad-cols { - samsung,pins = "gpx1-0", "gpx1-1", "gpx1-2", "gpx1-3", - "gpx1-4", "gpx1-5", "gpx1-6", "gpx1-7"; - samsung,pin-function = <3>; - samsung,pin-pud = <0>; - samsung,pin-drv = <0>; + xusbxti { + compatible = "samsung,clock-xusbxti"; + clock-frequency = <24000000>; }; }; +}; - keypad@100A0000 { - samsung,keypad-num-rows = <3>; - samsung,keypad-num-columns = <8>; - linux,keypad-no-autorepeat; - linux,keypad-wakeup; - pinctrl-0 = <&keypad_rows &keypad_cols>; - pinctrl-names = "default"; - status = "okay"; - - key_1 { - keypad,row = <1>; - keypad,column = <3>; - linux,code = <2>; - }; - - key_2 { - keypad,row = <1>; - keypad,column = <4>; - linux,code = <3>; - }; - - key_3 { - keypad,row = <1>; - keypad,column = <5>; - linux,code = <4>; - }; - - key_4 { - keypad,row = <1>; - keypad,column = <6>; - linux,code = <5>; - }; +&g2d { + status = "okay"; +}; - key_5 { - keypad,row = <1>; - keypad,column = <7>; - linux,code = <6>; - }; +&keypad { + samsung,keypad-num-rows = <3>; + samsung,keypad-num-columns = <8>; + linux,keypad-no-autorepeat; + linux,keypad-wakeup; + pinctrl-0 = <&keypad_rows &keypad_cols>; + pinctrl-names = "default"; + status = "okay"; + + key_1 { + keypad,row = <1>; + keypad,column = <3>; + linux,code = <2>; + }; - key_A { - keypad,row = <2>; - keypad,column = <6>; - linux,code = <30>; - }; + key_2 { + keypad,row = <1>; + keypad,column = <4>; + linux,code = <3>; + }; - key_B { - keypad,row = <2>; - keypad,column = <7>; - linux,code = <48>; - }; + key_3 { + keypad,row = <1>; + keypad,column = <5>; + linux,code = <4>; + }; - key_C { - keypad,row = <0>; - keypad,column = <5>; - linux,code = <46>; - }; + key_4 { + keypad,row = <1>; + keypad,column = <6>; + linux,code = <5>; + }; - key_D { - keypad,row = <2>; - keypad,column = <5>; - linux,code = <32>; - }; + key_5 { + keypad,row = <1>; + keypad,column = <7>; + linux,code = <6>; + }; - key_E { - keypad,row = <0>; - keypad,column = <7>; - linux,code = <18>; - }; + key_A { + keypad,row = <2>; + keypad,column = <6>; + linux,code = <30>; }; - sdhci@12530000 { - bus-width = <4>; - pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_bus4 &sd2_cd>; - pinctrl-names = "default"; - status = "okay"; + key_B { + keypad,row = <2>; + keypad,column = <7>; + linux,code = <48>; }; - codec@13400000 { - samsung,mfc-r = <0x43000000 0x800000>; - samsung,mfc-l = <0x51000000 0x800000>; - status = "okay"; + key_C { + keypad,row = <0>; + keypad,column = <5>; + linux,code = <46>; }; - serial@13800000 { - status = "okay"; + key_D { + keypad,row = <2>; + keypad,column = <5>; + linux,code = <32>; }; - serial@13810000 { - status = "okay"; + key_E { + keypad,row = <0>; + keypad,column = <7>; + linux,code = <18>; }; +}; + +&mfc { + samsung,mfc-r = <0x43000000 0x800000>; + samsung,mfc-l = <0x51000000 0x800000>; + status = "okay"; +}; - serial@13820000 { - status = "okay"; +&pinctrl_1 { + keypad_rows: keypad-rows { + samsung,pins = "gpx2-0", "gpx2-1", "gpx2-2"; + samsung,pin-function = <3>; + samsung,pin-pud = <3>; + samsung,pin-drv = <0>; }; - serial@13830000 { - status = "okay"; + keypad_cols: keypad-cols { + samsung,pins = "gpx1-0", "gpx1-1", "gpx1-2", "gpx1-3", + "gpx1-4", "gpx1-5", "gpx1-6", "gpx1-7"; + samsung,pin-function = <3>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; }; +}; - fixed-rate-clocks { - xxti { - compatible = "samsung,clock-xxti"; - clock-frequency = <0>; - }; +&sdhci_2 { + bus-width = <4>; + pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_bus4 &sd2_cd>; + pinctrl-names = "default"; + status = "okay"; +}; - xusbxti { - compatible = "samsung,clock-xusbxti"; - clock-frequency = <24000000>; - }; - }; +&serial_0 { + status = "okay"; +}; + +&serial_1 { + status = "okay"; +}; + +&serial_2 { + status = "okay"; +}; + +&serial_3 { + status = "okay"; }; diff --git a/arch/arm/boot/dts/exynos4412-tiny4412.dts b/arch/arm/boot/dts/exynos4412-tiny4412.dts index d46fd4c2a..525684ca8 100644 --- a/arch/arm/boot/dts/exynos4412-tiny4412.dts +++ b/arch/arm/boot/dts/exynos4412-tiny4412.dts @@ -56,33 +56,6 @@ }; }; - rtc@10070000 { - status = "okay"; - }; - - sdhci@12530000 { - bus-width = <4>; - pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus4>; - pinctrl-names = "default"; - status = "okay"; - }; - - serial@13800000 { - status = "okay"; - }; - - serial@13810000 { - status = "okay"; - }; - - serial@13820000 { - status = "okay"; - }; - - serial@13830000 { - status = "okay"; - }; - fixed-rate-clocks { xxti { compatible = "samsung,clock-xxti"; @@ -95,3 +68,30 @@ }; }; }; + +&rtc { + status = "okay"; +}; + +&sdhci_2 { + bus-width = <4>; + pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus4>; + pinctrl-names = "default"; + status = "okay"; +}; + +&serial_0 { + status = "okay"; +}; + +&serial_1 { + status = "okay"; +}; + +&serial_2 { + status = "okay"; +}; + +&serial_3 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/exynos4412-trats2.dts b/arch/arm/boot/dts/exynos4412-trats2.dts index 792394dd0..afc199d78 100644 --- a/arch/arm/boot/dts/exynos4412-trats2.dts +++ b/arch/arm/boot/dts/exynos4412-trats2.dts @@ -16,6 +16,7 @@ #include "exynos4412.dtsi" #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/clock/maxim,max77686.h> / { model = "Samsung Trats 2 based on Exynos4412"; @@ -130,411 +131,6 @@ }; }; - adc: adc@126C0000 { - vdd-supply = <&ldo3_reg>; - status = "okay"; - }; - - i2c@13890000 { - samsung,i2c-sda-delay = <100>; - samsung,i2c-slave-addr = <0x10>; - samsung,i2c-max-bus-freq = <400000>; - pinctrl-0 = <&i2c3_bus>; - pinctrl-names = "default"; - status = "okay"; - - mms114-touchscreen@48 { - compatible = "melfas,mms114"; - reg = <0x48>; - interrupt-parent = <&gpm2>; - interrupts = <3 2>; - x-size = <720>; - y-size = <1280>; - avdd-supply = <&ldo23_reg>; - vdd-supply = <&ldo24_reg>; - }; - }; - - i2c_0: i2c@13860000 { - samsung,i2c-sda-delay = <100>; - samsung,i2c-slave-addr = <0x10>; - samsung,i2c-max-bus-freq = <400000>; - pinctrl-0 = <&i2c0_bus>; - pinctrl-names = "default"; - status = "okay"; - - s5c73m3@3c { - compatible = "samsung,s5c73m3"; - reg = <0x3c>; - standby-gpios = <&gpm0 1 1>; /* ISP_STANDBY */ - xshutdown-gpios = <&gpf1 3 1>; /* ISP_RESET */ - vdd-int-supply = <&buck9_reg>; - vddio-cis-supply = <&ldo9_reg>; - vdda-supply = <&ldo17_reg>; - vddio-host-supply = <&ldo18_reg>; - vdd-af-supply = <&cam_af_reg>; - vdd-reg-supply = <&cam_io_reg>; - clock-frequency = <24000000>; - /* CAM_A_CLKOUT */ - clocks = <&camera 0>; - clock-names = "cis_extclk"; - port { - s5c73m3_ep: endpoint { - remote-endpoint = <&csis0_ep>; - data-lanes = <1 2 3 4>; - }; - }; - }; - }; - - i2c@138A0000 { - samsung,i2c-sda-delay = <100>; - samsung,i2c-slave-addr = <0x10>; - samsung,i2c-max-bus-freq = <100000>; - pinctrl-0 = <&i2c4_bus>; - pinctrl-names = "default"; - status = "okay"; - - wm1811: wm1811@1a { - compatible = "wlf,wm1811"; - reg = <0x1a>; - clocks = <&pmu_system_controller 0>; - clock-names = "MCLK1"; - DCVDD-supply = <&ldo3_reg>; - DBVDD1-supply = <&ldo3_reg>; - wlf,ldo1ena = <&gpj0 4 0>; - }; - }; - - i2c@138D0000 { - samsung,i2c-sda-delay = <100>; - samsung,i2c-slave-addr = <0x10>; - samsung,i2c-max-bus-freq = <100000>; - pinctrl-0 = <&i2c7_bus>; - pinctrl-names = "default"; - status = "okay"; - - max77686_pmic@09 { - compatible = "maxim,max77686"; - interrupt-parent = <&gpx0>; - interrupts = <7 0>; - reg = <0x09>; - #clock-cells = <1>; - - voltage-regulators { - ldo1_reg: ldo1 { - regulator-compatible = "LDO1"; - regulator-name = "VALIVE_1.0V_AP"; - regulator-min-microvolt = <1000000>; - regulator-max-microvolt = <1000000>; - regulator-always-on; - }; - - ldo2_reg: ldo2 { - regulator-compatible = "LDO2"; - regulator-name = "VM1M2_1.2V_AP"; - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1200000>; - regulator-always-on; - regulator-state-mem { - regulator-on-in-suspend; - }; - }; - - ldo3_reg: ldo3 { - regulator-compatible = "LDO3"; - regulator-name = "VCC_1.8V_AP"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-always-on; - }; - - ldo4_reg: ldo4 { - regulator-compatible = "LDO4"; - regulator-name = "VCC_2.8V_AP"; - regulator-min-microvolt = <2800000>; - regulator-max-microvolt = <2800000>; - regulator-always-on; - }; - - ldo5_reg: ldo5 { - regulator-compatible = "LDO5"; - regulator-name = "VCC_1.8V_IO"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-always-on; - }; - - ldo6_reg: ldo6 { - regulator-compatible = "LDO6"; - regulator-name = "VMPLL_1.0V_AP"; - regulator-min-microvolt = <1000000>; - regulator-max-microvolt = <1000000>; - regulator-always-on; - regulator-state-mem { - regulator-on-in-suspend; - }; - }; - - ldo7_reg: ldo7 { - regulator-compatible = "LDO7"; - regulator-name = "VPLL_1.0V_AP"; - regulator-min-microvolt = <1000000>; - regulator-max-microvolt = <1000000>; - regulator-always-on; - regulator-state-mem { - regulator-on-in-suspend; - }; - }; - - ldo8_reg: ldo8 { - regulator-compatible = "LDO8"; - regulator-name = "VMIPI_1.0V"; - regulator-min-microvolt = <1000000>; - regulator-max-microvolt = <1000000>; - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - ldo9_reg: ldo9 { - regulator-compatible = "LDO9"; - regulator-name = "CAM_ISP_MIPI_1.2V"; - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1200000>; - }; - - ldo10_reg: ldo10 { - regulator-compatible = "LDO10"; - regulator-name = "VMIPI_1.8V"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - ldo11_reg: ldo11 { - regulator-compatible = "LDO11"; - regulator-name = "VABB1_1.95V"; - regulator-min-microvolt = <1950000>; - regulator-max-microvolt = <1950000>; - regulator-always-on; - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - ldo12_reg: ldo12 { - regulator-compatible = "LDO12"; - regulator-name = "VUOTG_3.0V"; - regulator-min-microvolt = <3000000>; - regulator-max-microvolt = <3000000>; - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - ldo13_reg: ldo13 { - regulator-compatible = "LDO13"; - regulator-name = "NFC_AVDD_1.8V"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - ldo14_reg: ldo14 { - regulator-compatible = "LDO14"; - regulator-name = "VABB2_1.95V"; - regulator-min-microvolt = <1950000>; - regulator-max-microvolt = <1950000>; - regulator-always-on; - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - ldo15_reg: ldo15 { - regulator-compatible = "LDO15"; - regulator-name = "VHSIC_1.0V"; - regulator-min-microvolt = <1000000>; - regulator-max-microvolt = <1000000>; - regulator-state-mem { - regulator-on-in-suspend; - }; - }; - - ldo16_reg: ldo16 { - regulator-compatible = "LDO16"; - regulator-name = "VHSIC_1.8V"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-state-mem { - regulator-on-in-suspend; - }; - }; - - ldo17_reg: ldo17 { - regulator-compatible = "LDO17"; - regulator-name = "CAM_SENSOR_CORE_1.2V"; - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1200000>; - }; - - ldo18_reg: ldo18 { - regulator-compatible = "LDO18"; - regulator-name = "CAM_ISP_SEN_IO_1.8V"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - ldo19_reg: ldo19 { - regulator-compatible = "LDO19"; - regulator-name = "VT_CAM_1.8V"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - ldo20_reg: ldo20 { - regulator-compatible = "LDO20"; - regulator-name = "VDDQ_PRE_1.8V"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - ldo21_reg: ldo21 { - regulator-compatible = "LDO21"; - regulator-name = "VTF_2.8V"; - regulator-min-microvolt = <2800000>; - regulator-max-microvolt = <2800000>; - maxim,ena-gpios = <&gpy2 0 GPIO_ACTIVE_HIGH>; - }; - - ldo22_reg: ldo22 { - regulator-compatible = "LDO22"; - regulator-name = "VMEM_VDD_2.8V"; - regulator-min-microvolt = <2800000>; - regulator-max-microvolt = <2800000>; - maxim,ena-gpios = <&gpk0 2 GPIO_ACTIVE_HIGH>; - }; - - ldo23_reg: ldo23 { - regulator-compatible = "LDO23"; - regulator-name = "TSP_AVDD_3.3V"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - }; - - ldo24_reg: ldo24 { - regulator-compatible = "LDO24"; - regulator-name = "TSP_VDD_1.8V"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - ldo25_reg: ldo25 { - regulator-compatible = "LDO25"; - regulator-name = "LCD_VCC_3.3V"; - regulator-min-microvolt = <2800000>; - regulator-max-microvolt = <2800000>; - }; - - ldo26_reg: ldo26 { - regulator-compatible = "LDO26"; - regulator-name = "MOTOR_VCC_3.0V"; - regulator-min-microvolt = <3000000>; - regulator-max-microvolt = <3000000>; - }; - - buck1_reg: buck1 { - regulator-compatible = "BUCK1"; - regulator-name = "vdd_mif"; - regulator-min-microvolt = <850000>; - regulator-max-microvolt = <1100000>; - regulator-always-on; - regulator-boot-on; - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - buck2_reg: buck2 { - regulator-compatible = "BUCK2"; - regulator-name = "vdd_arm"; - regulator-min-microvolt = <850000>; - regulator-max-microvolt = <1500000>; - regulator-always-on; - regulator-boot-on; - regulator-state-mem { - regulator-on-in-suspend; - }; - }; - - buck3_reg: buck3 { - regulator-compatible = "BUCK3"; - regulator-name = "vdd_int"; - regulator-min-microvolt = <850000>; - regulator-max-microvolt = <1150000>; - regulator-always-on; - regulator-boot-on; - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - buck4_reg: buck4 { - regulator-compatible = "BUCK4"; - regulator-name = "vdd_g3d"; - regulator-min-microvolt = <850000>; - regulator-max-microvolt = <1150000>; - regulator-boot-on; - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - buck5_reg: buck5 { - regulator-compatible = "BUCK5"; - regulator-name = "VMEM_1.2V_AP"; - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1200000>; - regulator-always-on; - }; - - buck6_reg: buck6 { - regulator-compatible = "BUCK6"; - regulator-name = "VCC_SUB_1.35V"; - regulator-min-microvolt = <1350000>; - regulator-max-microvolt = <1350000>; - regulator-always-on; - }; - - buck7_reg: buck7 { - regulator-compatible = "BUCK7"; - regulator-name = "VCC_SUB_2.0V"; - regulator-min-microvolt = <2000000>; - regulator-max-microvolt = <2000000>; - regulator-always-on; - }; - - buck8_reg: buck8 { - regulator-compatible = "BUCK8"; - regulator-name = "VMEM_VDDF_3.0V"; - regulator-min-microvolt = <2850000>; - regulator-max-microvolt = <2850000>; - maxim,ena-gpios = <&gpk0 2 GPIO_ACTIVE_HIGH>; - }; - - buck9_reg: buck9 { - regulator-compatible = "BUCK9"; - regulator-name = "CAM_ISP_CORE_1.2V"; - regulator-min-microvolt = <1000000>; - regulator-max-microvolt = <1200000>; - maxim,ena-gpios = <&gpm0 3 GPIO_ACTIVE_HIGH>; - }; - }; - }; - }; - i2c_max77693: i2c-gpio-1 { compatible = "i2c-gpio"; gpios = <&gpm2 0 GPIO_ACTIVE_HIGH>, <&gpm2 1 GPIO_ACTIVE_HIGH>; @@ -597,54 +193,6 @@ }; }; - mmc@12550000 { - num-slots = <1>; - broken-cd; - non-removable; - card-detect-delay = <200>; - vmmc-supply = <&ldo22_reg>; - clock-frequency = <400000000>; - samsung,dw-mshc-ciu-div = <0>; - samsung,dw-mshc-sdr-timing = <2 3>; - samsung,dw-mshc-ddr-timing = <1 2>; - pinctrl-0 = <&sd4_clk &sd4_cmd &sd4_bus4 &sd4_bus8>; - pinctrl-names = "default"; - status = "okay"; - bus-width = <8>; - cap-mmc-highspeed; - }; - - sdhci@12530000 { - bus-width = <4>; - cd-gpios = <&gpx3 4 0>; - cd-inverted; - pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_bus4>; - pinctrl-names = "default"; - vmmc-supply = <&ldo21_reg>; - status = "okay"; - }; - - serial@13800000 { - status = "okay"; - }; - - serial@13810000 { - status = "okay"; - }; - - serial@13820000 { - status = "okay"; - }; - - serial@13830000 { - status = "okay"; - }; - - tmu@100C0000 { - vtmu-supply = <&ldo10_reg>; - status = "okay"; - }; - i2c_ak8975: i2c-gpio-0 { compatible = "i2c-gpio"; gpios = <&gpy2 4 0>, <&gpy2 5 0>; @@ -676,90 +224,6 @@ }; }; - spi_1: spi@13930000 { - pinctrl-names = "default"; - pinctrl-0 = <&spi1_bus>; - cs-gpios = <&gpb 5 0>; - status = "okay"; - - s5c73m3_spi: s5c73m3 { - compatible = "samsung,s5c73m3"; - spi-max-frequency = <50000000>; - reg = <0>; - controller-data { - samsung,spi-feedback-delay = <2>; - }; - }; - }; - - pwm: pwm@139D0000 { - pinctrl-0 = <&pwm0_out>; - pinctrl-names = "default"; - samsung,pwm-outputs = <0>; - status = "okay"; - }; - - dsi_0: dsi@11C80000 { - vddcore-supply = <&ldo8_reg>; - vddio-supply = <&ldo10_reg>; - samsung,pll-clock-frequency = <24000000>; - status = "okay"; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@1 { - reg = <1>; - - dsi_out: endpoint { - remote-endpoint = <&dsi_in>; - samsung,burst-clock-frequency = <500000000>; - samsung,esc-clock-frequency = <20000000>; - }; - }; - }; - - panel@0 { - compatible = "samsung,s6e8aa0"; - reg = <0>; - vdd3-supply = <&lcd_vdd3_reg>; - vci-supply = <&ldo25_reg>; - reset-gpios = <&gpy4 5 0>; - power-on-delay= <50>; - reset-delay = <100>; - init-delay = <100>; - flip-horizontal; - flip-vertical; - panel-width-mm = <58>; - panel-height-mm = <103>; - - display-timings { - timing-0 { - clock-frequency = <57153600>; - hactive = <720>; - vactive = <1280>; - hfront-porch = <5>; - hback-porch = <5>; - hsync-len = <5>; - vfront-porch = <13>; - vback-porch = <1>; - vsync-len = <2>; - }; - }; - - port { - dsi_in: endpoint { - remote-endpoint = <&dsi_out>; - }; - }; - }; - }; - - fimd@11c00000 { - status = "okay"; - }; - camera: camera { pinctrl-0 = <&cam_port_a_clk_active &cam_port_b_clk_active>; pinctrl-names = "default"; @@ -769,124 +233,7 @@ assigned-clock-parents = <&clock CLK_XUSBXTI>, <&clock CLK_XUSBXTI>; - fimc_0: fimc@11800000 { - status = "okay"; - assigned-clocks = <&clock CLK_MOUT_FIMC0>, - <&clock CLK_SCLK_FIMC0>; - assigned-clock-parents = <&clock CLK_MOUT_MPLL_USER_T>; - assigned-clock-rates = <0>, <176000000>; - }; - - fimc_1: fimc@11810000 { - status = "okay"; - assigned-clocks = <&clock CLK_MOUT_FIMC1>, - <&clock CLK_SCLK_FIMC1>; - assigned-clock-parents = <&clock CLK_MOUT_MPLL_USER_T>; - assigned-clock-rates = <0>, <176000000>; - }; - - fimc_2: fimc@11820000 { - status = "okay"; - assigned-clocks = <&clock CLK_MOUT_FIMC2>, - <&clock CLK_SCLK_FIMC2>; - assigned-clock-parents = <&clock CLK_MOUT_MPLL_USER_T>; - assigned-clock-rates = <0>, <176000000>; - }; - - fimc_3: fimc@11830000 { - status = "okay"; - assigned-clocks = <&clock CLK_MOUT_FIMC3>, - <&clock CLK_SCLK_FIMC3>; - assigned-clock-parents = <&clock CLK_MOUT_MPLL_USER_T>; - assigned-clock-rates = <0>, <176000000>; - }; - - csis_0: csis@11880000 { - status = "okay"; - vddcore-supply = <&ldo8_reg>; - vddio-supply = <&ldo10_reg>; - assigned-clocks = <&clock CLK_MOUT_CSIS0>, - <&clock CLK_SCLK_CSIS0>; - assigned-clock-parents = <&clock CLK_MOUT_MPLL_USER_T>; - assigned-clock-rates = <0>, <176000000>; - - /* Camera C (3) MIPI CSI-2 (CSIS0) */ - port@3 { - reg = <3>; - csis0_ep: endpoint { - remote-endpoint = <&s5c73m3_ep>; - data-lanes = <1 2 3 4>; - samsung,csis-hs-settle = <12>; - }; - }; - }; - - csis_1: csis@11890000 { - status = "okay"; - vddcore-supply = <&ldo8_reg>; - vddio-supply = <&ldo10_reg>; - assigned-clocks = <&clock CLK_MOUT_CSIS1>, - <&clock CLK_SCLK_CSIS1>; - assigned-clock-parents = <&clock CLK_MOUT_MPLL_USER_T>; - assigned-clock-rates = <0>, <176000000>; - - /* Camera D (4) MIPI CSI-2 (CSIS1) */ - port@4 { - reg = <4>; - csis1_ep: endpoint { - remote-endpoint = <&is_s5k6a3_ep>; - data-lanes = <1>; - samsung,csis-hs-settle = <18>; - samsung,csis-wclk; - }; - }; - }; - - fimc_lite_0: fimc-lite@12390000 { - status = "okay"; - }; - - fimc_lite_1: fimc-lite@123A0000 { - status = "okay"; - }; - fimc-is@12000000 { - pinctrl-0 = <&fimc_is_uart>; - pinctrl-names = "default"; - status = "okay"; - - i2c1_isp: i2c-isp@12140000 { - pinctrl-0 = <&fimc_is_i2c1>; - pinctrl-names = "default"; - - s5k6a3@10 { - compatible = "samsung,s5k6a3"; - reg = <0x10>; - svdda-supply = <&cam_io_reg>; - svddio-supply = <&ldo19_reg>; - afvdd-supply = <&ldo19_reg>; - clock-frequency = <24000000>; - /* CAM_B_CLKOUT */ - clocks = <&camera 1>; - clock-names = "extclk"; - samsung,camclk-out = <1>; - gpios = <&gpm1 6 0>; - - port { - is_s5k6a3_ep: endpoint { - remote-endpoint = <&csis1_ep>; - data-lanes = <1>; - }; - }; - }; - }; - }; - }; - - i2s0: i2s@03830000 { - pinctrl-0 = <&i2s0_bus>; - pinctrl-names = "default"; - status = "okay"; }; sound { @@ -901,17 +248,6 @@ "SPK", "SPKOUTRP"; }; - exynos-usbphy@125B0000 { - status = "okay"; - }; - - hsotg@12480000 { - vusb_d-supply = <&ldo15_reg>; - vusb_a-supply = <&ldo12_reg>; - dr_mode = "peripheral"; - status = "okay"; - }; - thermistor-ap@0 { compatible = "ntc,ncp15wb473"; pullup-uv = <1800000>; /* VCC_1.8V_AP */ @@ -944,6 +280,619 @@ }; }; +&adc { + vdd-supply = <&ldo3_reg>; + status = "okay"; +}; + +&csis_0 { + status = "okay"; + vddcore-supply = <&ldo8_reg>; + vddio-supply = <&ldo10_reg>; + assigned-clocks = <&clock CLK_MOUT_CSIS0>, + <&clock CLK_SCLK_CSIS0>; + assigned-clock-parents = <&clock CLK_MOUT_MPLL_USER_T>; + assigned-clock-rates = <0>, <176000000>; + + /* Camera C (3) MIPI CSI-2 (CSIS0) */ + port@3 { + reg = <3>; + csis0_ep: endpoint { + remote-endpoint = <&s5c73m3_ep>; + data-lanes = <1 2 3 4>; + samsung,csis-hs-settle = <12>; + }; + }; +}; + +&csis_1 { + status = "okay"; + vddcore-supply = <&ldo8_reg>; + vddio-supply = <&ldo10_reg>; + assigned-clocks = <&clock CLK_MOUT_CSIS1>, + <&clock CLK_SCLK_CSIS1>; + assigned-clock-parents = <&clock CLK_MOUT_MPLL_USER_T>; + assigned-clock-rates = <0>, <176000000>; + + /* Camera D (4) MIPI CSI-2 (CSIS1) */ + port@4 { + reg = <4>; + csis1_ep: endpoint { + remote-endpoint = <&is_s5k6a3_ep>; + data-lanes = <1>; + samsung,csis-hs-settle = <18>; + samsung,csis-wclk; + }; + }; +}; + +&dsi_0 { + vddcore-supply = <&ldo8_reg>; + vddio-supply = <&ldo10_reg>; + samsung,pll-clock-frequency = <24000000>; + status = "okay"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@1 { + reg = <1>; + + dsi_out: endpoint { + remote-endpoint = <&dsi_in>; + samsung,burst-clock-frequency = <500000000>; + samsung,esc-clock-frequency = <20000000>; + }; + }; + }; + + panel@0 { + compatible = "samsung,s6e8aa0"; + reg = <0>; + vdd3-supply = <&lcd_vdd3_reg>; + vci-supply = <&ldo25_reg>; + reset-gpios = <&gpy4 5 0>; + power-on-delay= <50>; + reset-delay = <100>; + init-delay = <100>; + flip-horizontal; + flip-vertical; + panel-width-mm = <58>; + panel-height-mm = <103>; + + display-timings { + timing-0 { + clock-frequency = <57153600>; + hactive = <720>; + vactive = <1280>; + hfront-porch = <5>; + hback-porch = <5>; + hsync-len = <5>; + vfront-porch = <13>; + vback-porch = <1>; + vsync-len = <2>; + }; + }; + + port { + dsi_in: endpoint { + remote-endpoint = <&dsi_out>; + }; + }; + }; +}; + +&exynos_usbphy { + status = "okay"; +}; + +&fimc_0 { + status = "okay"; + assigned-clocks = <&clock CLK_MOUT_FIMC0>, + <&clock CLK_SCLK_FIMC0>; + assigned-clock-parents = <&clock CLK_MOUT_MPLL_USER_T>; + assigned-clock-rates = <0>, <176000000>; +}; + +&fimc_1 { + status = "okay"; + assigned-clocks = <&clock CLK_MOUT_FIMC1>, + <&clock CLK_SCLK_FIMC1>; + assigned-clock-parents = <&clock CLK_MOUT_MPLL_USER_T>; + assigned-clock-rates = <0>, <176000000>; +}; + +&fimc_2 { + status = "okay"; + assigned-clocks = <&clock CLK_MOUT_FIMC2>, + <&clock CLK_SCLK_FIMC2>; + assigned-clock-parents = <&clock CLK_MOUT_MPLL_USER_T>; + assigned-clock-rates = <0>, <176000000>; +}; + +&fimc_3 { + status = "okay"; + assigned-clocks = <&clock CLK_MOUT_FIMC3>, + <&clock CLK_SCLK_FIMC3>; + assigned-clock-parents = <&clock CLK_MOUT_MPLL_USER_T>; + assigned-clock-rates = <0>, <176000000>; +}; + +&fimc_is { + pinctrl-0 = <&fimc_is_uart>; + pinctrl-names = "default"; + status = "okay"; + + i2c1_isp: i2c-isp@12140000 { + pinctrl-0 = <&fimc_is_i2c1>; + pinctrl-names = "default"; + + s5k6a3@10 { + compatible = "samsung,s5k6a3"; + reg = <0x10>; + svdda-supply = <&cam_io_reg>; + svddio-supply = <&ldo19_reg>; + afvdd-supply = <&ldo19_reg>; + clock-frequency = <24000000>; + /* CAM_B_CLKOUT */ + clocks = <&camera 1>; + clock-names = "extclk"; + samsung,camclk-out = <1>; + gpios = <&gpm1 6 0>; + + port { + is_s5k6a3_ep: endpoint { + remote-endpoint = <&csis1_ep>; + data-lanes = <1>; + }; + }; + }; + }; +}; + +&fimc_lite_0 { + status = "okay"; +}; + +&fimc_lite_1 { + status = "okay"; +}; + +&fimd { + status = "okay"; +}; + +&hsotg { + vusb_d-supply = <&ldo15_reg>; + vusb_a-supply = <&ldo12_reg>; + dr_mode = "peripheral"; + status = "okay"; +}; + +&i2c_0 { + samsung,i2c-sda-delay = <100>; + samsung,i2c-slave-addr = <0x10>; + samsung,i2c-max-bus-freq = <400000>; + pinctrl-0 = <&i2c0_bus>; + pinctrl-names = "default"; + status = "okay"; + + s5c73m3@3c { + compatible = "samsung,s5c73m3"; + reg = <0x3c>; + standby-gpios = <&gpm0 1 1>; /* ISP_STANDBY */ + xshutdown-gpios = <&gpf1 3 1>; /* ISP_RESET */ + vdd-int-supply = <&buck9_reg>; + vddio-cis-supply = <&ldo9_reg>; + vdda-supply = <&ldo17_reg>; + vddio-host-supply = <&ldo18_reg>; + vdd-af-supply = <&cam_af_reg>; + vdd-reg-supply = <&cam_io_reg>; + clock-frequency = <24000000>; + /* CAM_A_CLKOUT */ + clocks = <&camera 0>; + clock-names = "cis_extclk"; + port { + s5c73m3_ep: endpoint { + remote-endpoint = <&csis0_ep>; + data-lanes = <1 2 3 4>; + }; + }; + }; +}; + +&i2c_3 { + samsung,i2c-sda-delay = <100>; + samsung,i2c-slave-addr = <0x10>; + samsung,i2c-max-bus-freq = <400000>; + pinctrl-0 = <&i2c3_bus>; + pinctrl-names = "default"; + status = "okay"; + + mms114-touchscreen@48 { + compatible = "melfas,mms114"; + reg = <0x48>; + interrupt-parent = <&gpm2>; + interrupts = <3 2>; + x-size = <720>; + y-size = <1280>; + avdd-supply = <&ldo23_reg>; + vdd-supply = <&ldo24_reg>; + }; +}; + +&i2c_4 { + samsung,i2c-sda-delay = <100>; + samsung,i2c-slave-addr = <0x10>; + samsung,i2c-max-bus-freq = <100000>; + pinctrl-0 = <&i2c4_bus>; + pinctrl-names = "default"; + status = "okay"; + + wm1811: wm1811@1a { + compatible = "wlf,wm1811"; + reg = <0x1a>; + clocks = <&pmu_system_controller 0>; + clock-names = "MCLK1"; + DCVDD-supply = <&ldo3_reg>; + DBVDD1-supply = <&ldo3_reg>; + wlf,ldo1ena = <&gpj0 4 0>; + }; +}; + +&i2c_7 { + samsung,i2c-sda-delay = <100>; + samsung,i2c-slave-addr = <0x10>; + samsung,i2c-max-bus-freq = <100000>; + pinctrl-0 = <&i2c7_bus>; + pinctrl-names = "default"; + status = "okay"; + + max77686: max77686_pmic@09 { + compatible = "maxim,max77686"; + interrupt-parent = <&gpx0>; + interrupts = <7 0>; + reg = <0x09>; + #clock-cells = <1>; + + voltage-regulators { + ldo1_reg: ldo1 { + regulator-compatible = "LDO1"; + regulator-name = "VALIVE_1.0V_AP"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-always-on; + }; + + ldo2_reg: ldo2 { + regulator-compatible = "LDO2"; + regulator-name = "VM1M2_1.2V_AP"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + regulator-state-mem { + regulator-on-in-suspend; + }; + }; + + ldo3_reg: ldo3 { + regulator-compatible = "LDO3"; + regulator-name = "VCC_1.8V_AP"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + ldo4_reg: ldo4 { + regulator-compatible = "LDO4"; + regulator-name = "VCC_2.8V_AP"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-always-on; + }; + + ldo5_reg: ldo5 { + regulator-compatible = "LDO5"; + regulator-name = "VCC_1.8V_IO"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + ldo6_reg: ldo6 { + regulator-compatible = "LDO6"; + regulator-name = "VMPLL_1.0V_AP"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-always-on; + regulator-state-mem { + regulator-on-in-suspend; + }; + }; + + ldo7_reg: ldo7 { + regulator-compatible = "LDO7"; + regulator-name = "VPLL_1.0V_AP"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-always-on; + regulator-state-mem { + regulator-on-in-suspend; + }; + }; + + ldo8_reg: ldo8 { + regulator-compatible = "LDO8"; + regulator-name = "VMIPI_1.0V"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + ldo9_reg: ldo9 { + regulator-compatible = "LDO9"; + regulator-name = "CAM_ISP_MIPI_1.2V"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + ldo10_reg: ldo10 { + regulator-compatible = "LDO10"; + regulator-name = "VMIPI_1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + ldo11_reg: ldo11 { + regulator-compatible = "LDO11"; + regulator-name = "VABB1_1.95V"; + regulator-min-microvolt = <1950000>; + regulator-max-microvolt = <1950000>; + regulator-always-on; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + ldo12_reg: ldo12 { + regulator-compatible = "LDO12"; + regulator-name = "VUOTG_3.0V"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + ldo13_reg: ldo13 { + regulator-compatible = "LDO13"; + regulator-name = "NFC_AVDD_1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + ldo14_reg: ldo14 { + regulator-compatible = "LDO14"; + regulator-name = "VABB2_1.95V"; + regulator-min-microvolt = <1950000>; + regulator-max-microvolt = <1950000>; + regulator-always-on; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + ldo15_reg: ldo15 { + regulator-compatible = "LDO15"; + regulator-name = "VHSIC_1.0V"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-state-mem { + regulator-on-in-suspend; + }; + }; + + ldo16_reg: ldo16 { + regulator-compatible = "LDO16"; + regulator-name = "VHSIC_1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-state-mem { + regulator-on-in-suspend; + }; + }; + + ldo17_reg: ldo17 { + regulator-compatible = "LDO17"; + regulator-name = "CAM_SENSOR_CORE_1.2V"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + ldo18_reg: ldo18 { + regulator-compatible = "LDO18"; + regulator-name = "CAM_ISP_SEN_IO_1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + ldo19_reg: ldo19 { + regulator-compatible = "LDO19"; + regulator-name = "VT_CAM_1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + ldo20_reg: ldo20 { + regulator-compatible = "LDO20"; + regulator-name = "VDDQ_PRE_1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + ldo21_reg: ldo21 { + regulator-compatible = "LDO21"; + regulator-name = "VTF_2.8V"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + maxim,ena-gpios = <&gpy2 0 GPIO_ACTIVE_HIGH>; + }; + + ldo22_reg: ldo22 { + regulator-compatible = "LDO22"; + regulator-name = "VMEM_VDD_2.8V"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + maxim,ena-gpios = <&gpk0 2 GPIO_ACTIVE_HIGH>; + }; + + ldo23_reg: ldo23 { + regulator-compatible = "LDO23"; + regulator-name = "TSP_AVDD_3.3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + ldo24_reg: ldo24 { + regulator-compatible = "LDO24"; + regulator-name = "TSP_VDD_1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + ldo25_reg: ldo25 { + regulator-compatible = "LDO25"; + regulator-name = "LCD_VCC_3.3V"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + }; + + ldo26_reg: ldo26 { + regulator-compatible = "LDO26"; + regulator-name = "MOTOR_VCC_3.0V"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + }; + + buck1_reg: buck1 { + regulator-compatible = "BUCK1"; + regulator-name = "vdd_mif"; + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <1100000>; + regulator-always-on; + regulator-boot-on; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + buck2_reg: buck2 { + regulator-compatible = "BUCK2"; + regulator-name = "vdd_arm"; + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <1500000>; + regulator-always-on; + regulator-boot-on; + regulator-state-mem { + regulator-on-in-suspend; + }; + }; + + buck3_reg: buck3 { + regulator-compatible = "BUCK3"; + regulator-name = "vdd_int"; + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <1150000>; + regulator-always-on; + regulator-boot-on; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + buck4_reg: buck4 { + regulator-compatible = "BUCK4"; + regulator-name = "vdd_g3d"; + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <1150000>; + regulator-boot-on; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + buck5_reg: buck5 { + regulator-compatible = "BUCK5"; + regulator-name = "VMEM_1.2V_AP"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + }; + + buck6_reg: buck6 { + regulator-compatible = "BUCK6"; + regulator-name = "VCC_SUB_1.35V"; + regulator-min-microvolt = <1350000>; + regulator-max-microvolt = <1350000>; + regulator-always-on; + }; + + buck7_reg: buck7 { + regulator-compatible = "BUCK7"; + regulator-name = "VCC_SUB_2.0V"; + regulator-min-microvolt = <2000000>; + regulator-max-microvolt = <2000000>; + regulator-always-on; + }; + + buck8_reg: buck8 { + regulator-compatible = "BUCK8"; + regulator-name = "VMEM_VDDF_3.0V"; + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2850000>; + maxim,ena-gpios = <&gpk0 2 GPIO_ACTIVE_HIGH>; + }; + + buck9_reg: buck9 { + regulator-compatible = "BUCK9"; + regulator-name = "CAM_ISP_CORE_1.2V"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1200000>; + maxim,ena-gpios = <&gpm0 3 GPIO_ACTIVE_HIGH>; + }; + }; + }; +}; + +&i2s0 { + pinctrl-0 = <&i2s0_bus>; + pinctrl-names = "default"; + status = "okay"; +}; + +&mshc_0 { + num-slots = <1>; + broken-cd; + non-removable; + card-detect-delay = <200>; + vmmc-supply = <&ldo22_reg>; + clock-frequency = <400000000>; + samsung,dw-mshc-ciu-div = <0>; + samsung,dw-mshc-sdr-timing = <2 3>; + samsung,dw-mshc-ddr-timing = <1 2>; + pinctrl-0 = <&sd4_clk &sd4_cmd &sd4_bus4 &sd4_bus8>; + pinctrl-names = "default"; + status = "okay"; + bus-width = <8>; + cap-mmc-highspeed; +}; + &pmu_system_controller { assigned-clocks = <&pmu_system_controller 0>; assigned-clock-parents = <&clock CLK_XUSBXTI>; @@ -1304,3 +1253,63 @@ PIN_SLP(gpv4-0, INPUT, DOWN); }; }; + +&pwm { + pinctrl-0 = <&pwm0_out>; + pinctrl-names = "default"; + samsung,pwm-outputs = <0>; + status = "okay"; +}; + +&rtc { + status = "okay"; + clocks = <&clock CLK_RTC>, <&max77686 MAX77686_CLK_AP>; + clock-names = "rtc", "rtc_src"; +}; + +&sdhci_2 { + bus-width = <4>; + cd-gpios = <&gpx3 4 0>; + cd-inverted; + pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_bus4>; + pinctrl-names = "default"; + vmmc-supply = <&ldo21_reg>; + status = "okay"; +}; + +&serial_0 { + status = "okay"; +}; + +&serial_1 { + status = "okay"; +}; + +&serial_2 { + status = "okay"; +}; + +&serial_3 { + status = "okay"; +}; + +&spi_1 { + pinctrl-names = "default"; + pinctrl-0 = <&spi1_bus>; + cs-gpios = <&gpb 5 0>; + status = "okay"; + + s5c73m3_spi: s5c73m3 { + compatible = "samsung,s5c73m3"; + spi-max-frequency = <50000000>; + reg = <0>; + controller-data { + samsung,spi-feedback-delay = <2>; + }; + }; +}; + +&tmu { + vtmu-supply = <&ldo10_reg>; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/exynos4412.dtsi b/arch/arm/boot/dts/exynos4412.dtsi index 68ad43b39..b78ada70b 100644 --- a/arch/arm/boot/dts/exynos4412.dtsi +++ b/arch/arm/boot/dts/exynos4412.dtsi @@ -54,19 +54,19 @@ }; }; - combiner: interrupt-controller@10440000 { - samsung,combiner-nr = <20>; - }; - pmu { interrupts = <2 2>, <3 2>, <18 2>, <19 2>; }; +}; - gic: interrupt-controller@10490000 { - cpu-offset = <0x4000>; - }; +&pmu_system_controller { + compatible = "samsung,exynos4412-pmu", "syscon"; +}; - pmu_system_controller: system-controller@10020000 { - compatible = "samsung,exynos4412-pmu", "syscon"; - }; +&combiner { + samsung,combiner-nr = <20>; +}; + +&gic { + cpu-offset = <0x4000>; }; diff --git a/arch/arm/boot/dts/exynos4415.dtsi b/arch/arm/boot/dts/exynos4415.dtsi index 5caea996e..ad764842f 100644 --- a/arch/arm/boot/dts/exynos4415.dtsi +++ b/arch/arm/boot/dts/exynos4415.dtsi @@ -124,8 +124,8 @@ mipi_phy: video-phy@10020710 { compatible = "samsung,s5pv210-mipi-video-phy"; - reg = <0x10020710 8>; #phy-cells = <1>; + syscon = <&pmu_system_controller>; }; pd_cam: cam-power-domain@10024000 { @@ -177,7 +177,7 @@ }; rtc: rtc@10070000 { - compatible = "samsung,exynos3250-rtc"; + compatible = "samsung,s3c6410-rtc"; reg = <0x10070000 0x100>; interrupts = <0 73 0>, <0 74 0>; status = "disabled"; @@ -249,6 +249,7 @@ clocks = <&cmu CLK_SCLK_FIMD0>, <&cmu CLK_FIMD0>; clock-names = "sclk_fimd", "fimd"; samsung,power-domain = <&pd_lcd0>; + iommus = <&sysmmu_fimd0>; samsung,sysreg = <&sysreg_system_controller>; status = "disabled"; }; @@ -268,6 +269,16 @@ status = "disabled"; }; + sysmmu_fimd0: sysmmu@11E20000 { + compatible = "samsung,exynos-sysmmu"; + reg = <0x11e20000 0x1000>; + interrupts = <0 80 0>, <0 81 0>; + clock-names = "sysmmu", "master"; + clocks = <&cmu CLK_SMMUFIMD0>, <&cmu CLK_FIMD0>; + power-domains = <&pd_lcd0>; + #iommu-cells = <0>; + }; + hsotg: hsotg@12480000 { compatible = "samsung,s3c6400-hsotg"; reg = <0x12480000 0x20000>; diff --git a/arch/arm/boot/dts/exynos4x12-pinctrl.dtsi b/arch/arm/boot/dts/exynos4x12-pinctrl.dtsi index c14193137..bac25c672 100644 --- a/arch/arm/boot/dts/exynos4x12-pinctrl.dtsi +++ b/arch/arm/boot/dts/exynos4x12-pinctrl.dtsi @@ -29,7 +29,7 @@ } / { - pinctrl@11400000 { + pinctrl_0: pinctrl@11400000 { gpa0: gpa0 { gpio-controller; #gpio-cells = <2>; @@ -441,7 +441,7 @@ }; }; - pinctrl@11000000 { + pinctrl_1: pinctrl@11000000 { gpk0: gpk0 { gpio-controller; #gpio-cells = <2>; @@ -887,7 +887,7 @@ }; }; - pinctrl@03860000 { + pinctrl_2: pinctrl@03860000 { gpz: gpz { gpio-controller; #gpio-cells = <2>; @@ -913,7 +913,7 @@ }; }; - pinctrl@106E0000 { + pinctrl_3: pinctrl@106E0000 { gpv0: gpv0 { gpio-controller; #gpio-cells = <2>; diff --git a/arch/arm/boot/dts/exynos4x12.dtsi b/arch/arm/boot/dts/exynos4x12.dtsi index 6a6abe14f..b77dac61f 100644 --- a/arch/arm/boot/dts/exynos4x12.dtsi +++ b/arch/arm/boot/dts/exynos4x12.dtsi @@ -96,32 +96,6 @@ }; }; - combiner: interrupt-controller@10440000 { - interrupts = <0 0 0>, <0 1 0>, <0 2 0>, <0 3 0>, - <0 4 0>, <0 5 0>, <0 6 0>, <0 7 0>, - <0 8 0>, <0 9 0>, <0 10 0>, <0 11 0>, - <0 12 0>, <0 13 0>, <0 14 0>, <0 15 0>, - <0 107 0>, <0 108 0>, <0 48 0>, <0 42 0>; - }; - - pinctrl_0: pinctrl@11400000 { - compatible = "samsung,exynos4x12-pinctrl"; - reg = <0x11400000 0x1000>; - interrupts = <0 47 0>; - }; - - pinctrl_1: pinctrl@11000000 { - compatible = "samsung,exynos4x12-pinctrl"; - reg = <0x11000000 0x1000>; - interrupts = <0 46 0>; - - wakup_eint: wakeup-interrupt-controller { - compatible = "samsung,exynos4210-wakeup-eint"; - interrupt-parent = <&gic>; - interrupts = <0 32 0>; - }; - }; - adc: adc@126C0000 { compatible = "samsung,exynos-adc-v1"; reg = <0x126C0000 0x100>; @@ -135,36 +109,13 @@ status = "disabled"; }; - pinctrl_2: pinctrl@03860000 { - compatible = "samsung,exynos4x12-pinctrl"; - reg = <0x03860000 0x1000>; - interrupt-parent = <&combiner>; - interrupts = <10 0>; - }; - - pinctrl_3: pinctrl@106E0000 { - compatible = "samsung,exynos4x12-pinctrl"; - reg = <0x106E0000 0x1000>; - interrupts = <0 72 0>; - }; - - pmu_system_controller: system-controller@10020000 { - compatible = "samsung,exynos4212-pmu", "syscon"; - clock-names = "clkout0", "clkout1", "clkout2", "clkout3", - "clkout4", "clkout8", "clkout9"; - clocks = <&clock CLK_OUT_DMC>, <&clock CLK_OUT_TOP>, - <&clock CLK_OUT_LEFTBUS>, <&clock CLK_OUT_RIGHTBUS>, - <&clock CLK_OUT_CPU>, <&clock CLK_XXTI>, - <&clock CLK_XUSBXTI>; - #clock-cells = <1>; - }; - - g2d@10800000 { + g2d: g2d@10800000 { compatible = "samsung,exynos4212-g2d"; reg = <0x10800000 0x1000>; interrupts = <0 89 0>; clocks = <&clock CLK_SCLK_FIMG2D>, <&clock CLK_G2D>; clock-names = "sclk_fimg2d", "fimg2d"; + iommus = <&sysmmu_g2d>; status = "disabled"; }; @@ -173,40 +124,7 @@ <&clock CLK_PIXELASYNCM0>, <&clock CLK_PIXELASYNCM1>; clock-names = "sclk_cam0", "sclk_cam1", "pxl_async0", "pxl_async1"; - fimc_0: fimc@11800000 { - compatible = "samsung,exynos4212-fimc"; - samsung,pix-limits = <4224 8192 1920 4224>; - samsung,mainscaler-ext; - samsung,isp-wb; - samsung,cam-if; - }; - - fimc_1: fimc@11810000 { - compatible = "samsung,exynos4212-fimc"; - samsung,pix-limits = <4224 8192 1920 4224>; - samsung,mainscaler-ext; - samsung,isp-wb; - samsung,cam-if; - }; - - fimc_2: fimc@11820000 { - compatible = "samsung,exynos4212-fimc"; - samsung,pix-limits = <4224 8192 1920 4224>; - samsung,mainscaler-ext; - samsung,isp-wb; - samsung,lcd-wb; - samsung,cam-if; - }; - - fimc_3: fimc@11830000 { - compatible = "samsung,exynos4212-fimc"; - samsung,pix-limits = <1920 8192 1366 1920>; - samsung,rotators = <0>; - samsung,mainscaler-ext; - samsung,isp-wb; - samsung,lcd-wb; - }; - + /* fimc_[0-3] are configured outside, under phandles */ fimc_lite_0: fimc-lite@12390000 { compatible = "samsung,exynos4212-fimc-lite"; reg = <0x12390000 0x1000>; @@ -214,6 +132,7 @@ power-domains = <&pd_isp>; clocks = <&clock CLK_FIMC_LITE0>; clock-names = "flite"; + iommus = <&sysmmu_fimc_lite0>; status = "disabled"; }; @@ -224,6 +143,7 @@ power-domains = <&pd_isp>; clocks = <&clock CLK_FIMC_LITE1>; clock-names = "flite"; + iommus = <&sysmmu_fimc_lite1>; status = "disabled"; }; @@ -252,6 +172,9 @@ "mcuispdiv1", "uart", "aclk200", "div_aclk200", "aclk400mcuisp", "div_aclk400mcuisp"; + iommus = <&sysmmu_fimc_isp>, <&sysmmu_fimc_drc>, + <&sysmmu_fimc_fd>, <&sysmmu_fimc_mcuctl>; + iommu-names = "isp", "drc", "fd", "mcuctl"; #address-cells = <1>; #size-cells = <1>; ranges; @@ -284,29 +207,192 @@ status = "disabled"; }; - exynos-usbphy@125B0000 { - compatible = "samsung,exynos4x12-usb2-phy"; - samsung,sysreg-phandle = <&sys_reg>; + sysmmu_g2d: sysmmu@10A40000{ + compatible = "samsung,exynos-sysmmu"; + reg = <0x10A40000 0x1000>; + interrupt-parent = <&combiner>; + interrupts = <4 7>; + clock-names = "sysmmu", "master"; + clocks = <&clock CLK_SMMU_G2D>, <&clock CLK_G2D>; + #iommu-cells = <0>; }; - tmu@100C0000 { - compatible = "samsung,exynos4412-tmu"; + sysmmu_fimc_isp: sysmmu@12260000 { + compatible = "samsung,exynos-sysmmu"; + reg = <0x12260000 0x1000>; interrupt-parent = <&combiner>; - interrupts = <2 4>; - reg = <0x100C0000 0x100>; - clocks = <&clock 383>; - clock-names = "tmu_apbif"; - status = "disabled"; + interrupts = <16 2>; + power-domains = <&pd_isp>; + clock-names = "sysmmu"; + clocks = <&clock CLK_SMMU_ISP>; + #iommu-cells = <0>; }; - hdmi: hdmi@12D00000 { - compatible = "samsung,exynos4212-hdmi"; + sysmmu_fimc_drc: sysmmu@12270000 { + compatible = "samsung,exynos-sysmmu"; + reg = <0x12270000 0x1000>; + interrupt-parent = <&combiner>; + interrupts = <16 3>; + power-domains = <&pd_isp>; + clock-names = "sysmmu"; + clocks = <&clock CLK_SMMU_DRC>; + #iommu-cells = <0>; }; - mixer: mixer@12C10000 { - compatible = "samsung,exynos4212-mixer"; - clock-names = "mixer", "hdmi", "sclk_hdmi", "vp"; - clocks = <&clock CLK_MIXER>, <&clock CLK_HDMI>, - <&clock CLK_SCLK_HDMI>, <&clock CLK_VP>; + sysmmu_fimc_fd: sysmmu@122A0000 { + compatible = "samsung,exynos-sysmmu"; + reg = <0x122A0000 0x1000>; + interrupt-parent = <&combiner>; + interrupts = <16 4>; + power-domains = <&pd_isp>; + clock-names = "sysmmu"; + clocks = <&clock CLK_SMMU_FD>; + #iommu-cells = <0>; + }; + + sysmmu_fimc_mcuctl: sysmmu@122B0000 { + compatible = "samsung,exynos-sysmmu"; + reg = <0x122B0000 0x1000>; + interrupt-parent = <&combiner>; + interrupts = <16 5>; + power-domains = <&pd_isp>; + clock-names = "sysmmu"; + clocks = <&clock CLK_SMMU_ISPCX>; + #iommu-cells = <0>; }; + + sysmmu_fimc_lite0: sysmmu@123B0000 { + compatible = "samsung,exynos-sysmmu"; + reg = <0x123B0000 0x1000>; + interrupt-parent = <&combiner>; + interrupts = <16 0>; + power-domains = <&pd_isp>; + clock-names = "sysmmu", "master"; + clocks = <&clock CLK_SMMU_LITE0>, <&clock CLK_FIMC_LITE0>; + #iommu-cells = <0>; + }; + + sysmmu_fimc_lite1: sysmmu@123C0000 { + compatible = "samsung,exynos-sysmmu"; + reg = <0x123C0000 0x1000>; + interrupt-parent = <&combiner>; + interrupts = <16 1>; + power-domains = <&pd_isp>; + clock-names = "sysmmu", "master"; + clocks = <&clock CLK_SMMU_LITE1>, <&clock CLK_FIMC_LITE1>; + #iommu-cells = <0>; + }; +}; + +&combiner { + interrupts = <0 0 0>, <0 1 0>, <0 2 0>, <0 3 0>, + <0 4 0>, <0 5 0>, <0 6 0>, <0 7 0>, + <0 8 0>, <0 9 0>, <0 10 0>, <0 11 0>, + <0 12 0>, <0 13 0>, <0 14 0>, <0 15 0>, + <0 107 0>, <0 108 0>, <0 48 0>, <0 42 0>; +}; + +&exynos_usbphy { + compatible = "samsung,exynos4x12-usb2-phy"; + samsung,sysreg-phandle = <&sys_reg>; +}; + +&fimc_0 { + compatible = "samsung,exynos4212-fimc"; + samsung,pix-limits = <4224 8192 1920 4224>; + samsung,mainscaler-ext; + samsung,isp-wb; + samsung,cam-if; +}; + +&fimc_1 { + compatible = "samsung,exynos4212-fimc"; + samsung,pix-limits = <4224 8192 1920 4224>; + samsung,mainscaler-ext; + samsung,isp-wb; + samsung,cam-if; +}; + +&fimc_2 { + compatible = "samsung,exynos4212-fimc"; + samsung,pix-limits = <4224 8192 1920 4224>; + samsung,mainscaler-ext; + samsung,isp-wb; + samsung,lcd-wb; + samsung,cam-if; +}; + +&fimc_3 { + compatible = "samsung,exynos4212-fimc"; + samsung,pix-limits = <1920 8192 1366 1920>; + samsung,rotators = <0>; + samsung,mainscaler-ext; + samsung,isp-wb; + samsung,lcd-wb; +}; + +&hdmi { + compatible = "samsung,exynos4212-hdmi"; +}; + +&jpeg_codec { + compatible = "samsung,exynos4212-jpeg"; +}; + +&mixer { + compatible = "samsung,exynos4212-mixer"; + clock-names = "mixer", "hdmi", "sclk_hdmi", "vp"; + clocks = <&clock CLK_MIXER>, <&clock CLK_HDMI>, + <&clock CLK_SCLK_HDMI>, <&clock CLK_VP>; +}; + +&pinctrl_0 { + compatible = "samsung,exynos4x12-pinctrl"; + reg = <0x11400000 0x1000>; + interrupts = <0 47 0>; +}; + +&pinctrl_1 { + compatible = "samsung,exynos4x12-pinctrl"; + reg = <0x11000000 0x1000>; + interrupts = <0 46 0>; + + wakup_eint: wakeup-interrupt-controller { + compatible = "samsung,exynos4210-wakeup-eint"; + interrupt-parent = <&gic>; + interrupts = <0 32 0>; + }; +}; + +&pinctrl_2 { + compatible = "samsung,exynos4x12-pinctrl"; + reg = <0x03860000 0x1000>; + interrupt-parent = <&combiner>; + interrupts = <10 0>; +}; + +&pinctrl_3 { + compatible = "samsung,exynos4x12-pinctrl"; + reg = <0x106E0000 0x1000>; + interrupts = <0 72 0>; +}; + +&pmu_system_controller { + compatible = "samsung,exynos4212-pmu", "syscon"; + clock-names = "clkout0", "clkout1", "clkout2", "clkout3", + "clkout4", "clkout8", "clkout9"; + clocks = <&clock CLK_OUT_DMC>, <&clock CLK_OUT_TOP>, + <&clock CLK_OUT_LEFTBUS>, <&clock CLK_OUT_RIGHTBUS>, + <&clock CLK_OUT_CPU>, <&clock CLK_XXTI>, <&clock CLK_XUSBXTI>; + #clock-cells = <1>; +}; + +&tmu { + compatible = "samsung,exynos4412-tmu"; + interrupt-parent = <&combiner>; + interrupts = <2 4>; + reg = <0x100C0000 0x100>; + clocks = <&clock 383>; + clock-names = "tmu_apbif"; + status = "disabled"; }; diff --git a/arch/arm/boot/dts/exynos5.dtsi b/arch/arm/boot/dts/exynos5.dtsi index a0cc0b6f8..110dbd4fb 100644 --- a/arch/arm/boot/dts/exynos5.dtsi +++ b/arch/arm/boot/dts/exynos5.dtsi @@ -81,14 +81,14 @@ interrupts = <0 54 0>; }; - rtc@101E0000 { + rtc: rtc@101E0000 { compatible = "samsung,s3c6410-rtc"; reg = <0x101E0000 0x100>; interrupts = <0 43 0>, <0 44 0>; status = "disabled"; }; - fimd@14400000 { + fimd: fimd@14400000 { compatible = "samsung,exynos5250-fimd"; interrupt-parent = <&combiner>; reg = <0x14400000 0x40000>; @@ -98,7 +98,7 @@ status = "disabled"; }; - dp-controller@145B0000 { + dp: dp-controller@145B0000 { compatible = "samsung,exynos5-dp"; reg = <0x145B0000 0x1000>; interrupts = <10 3>; diff --git a/arch/arm/boot/dts/exynos5250-smdk5250.dts b/arch/arm/boot/dts/exynos5250-smdk5250.dts index bc27cc255..4fe186d01 100644 --- a/arch/arm/boot/dts/exynos5250-smdk5250.dts +++ b/arch/arm/boot/dts/exynos5250-smdk5250.dts @@ -131,6 +131,9 @@ reg = <0x09>; interrupt-parent = <&gpx3>; interrupts = <2 IRQ_TYPE_NONE>; + pinctrl-names = "default"; + pinctrl-0 = <&max77686_irq>; + wakeup-source; voltage-regulators { ldo1_reg: LDO1 { @@ -410,3 +413,12 @@ }; }; }; + +&pinctrl_0 { + max77686_irq: max77686-irq { + samsung,pins = "gpx3-2"; + samsung,pin-function = <0xf>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; +}; diff --git a/arch/arm/boot/dts/exynos5250-snow.dts b/arch/arm/boot/dts/exynos5250-snow.dts index 1eca97ee4..b7f4122df 100644 --- a/arch/arm/boot/dts/exynos5250-snow.dts +++ b/arch/arm/boot/dts/exynos5250-snow.dts @@ -177,30 +177,6 @@ }; }; - i2c@12CD0000 { - ptn3460: lvds-bridge@20 { - compatible = "nxp,ptn3460"; - reg = <0x20>; - powerdown-gpios = <&gpy2 5 GPIO_ACTIVE_HIGH>; - reset-gpios = <&gpx1 5 GPIO_ACTIVE_HIGH>; - edid-emulation = <5>; - - ports { - port@0 { - bridge_out: endpoint { - remote-endpoint = <&panel_in>; - }; - }; - - port@1 { - bridge_in: endpoint { - remote-endpoint = <&dp_out>; - }; - }; - }; - }; - }; - sound { compatible = "google,snow-audio-max98095"; @@ -507,6 +483,28 @@ samsung,i2c-sda-delay = <100>; samsung,i2c-max-bus-freq = <66000>; + ptn3460: lvds-bridge@20 { + compatible = "nxp,ptn3460"; + reg = <0x20>; + powerdown-gpios = <&gpy2 5 GPIO_ACTIVE_HIGH>; + reset-gpios = <&gpx1 5 GPIO_ACTIVE_HIGH>; + edid-emulation = <5>; + + ports { + port@0 { + bridge_out: endpoint { + remote-endpoint = <&panel_in>; + }; + }; + + port@1 { + bridge_in: endpoint { + remote-endpoint = <&dp_out>; + }; + }; + }; + }; + max98095: codec@11 { compatible = "maxim,max98095"; reg = <0x11>; diff --git a/arch/arm/boot/dts/exynos5250.dtsi b/arch/arm/boot/dts/exynos5250.dtsi index 257e2f105..bf9bee67c 100644 --- a/arch/arm/boot/dts/exynos5250.dtsi +++ b/arch/arm/boot/dts/exynos5250.dtsi @@ -230,6 +230,7 @@ interrupts = <0 91 0>; clocks = <&clock CLK_G2D>; clock-names = "fimg2d"; + iommus = <&sysmmu_g2d>; }; mfc: codec@11000000 { @@ -239,13 +240,8 @@ power-domains = <&pd_mfc>; clocks = <&clock CLK_MFC>; clock-names = "mfc"; - }; - - rtc: rtc@101E0000 { - clocks = <&clock CLK_RTC>; - clock-names = "rtc"; - interrupt-parent = <&pmu_system_controller>; - status = "disabled"; + iommus = <&sysmmu_mfc_l>, <&sysmmu_mfc_r>; + iommu-names = "left", "right"; }; tmu: tmu@10060000 { @@ -276,26 +272,6 @@ }; }; - serial@12C00000 { - clocks = <&clock CLK_UART0>, <&clock CLK_SCLK_UART0>; - clock-names = "uart", "clk_uart_baud0"; - }; - - serial@12C10000 { - clocks = <&clock CLK_UART1>, <&clock CLK_SCLK_UART1>; - clock-names = "uart", "clk_uart_baud0"; - }; - - serial@12C20000 { - clocks = <&clock CLK_UART2>, <&clock CLK_SCLK_UART2>; - clock-names = "uart", "clk_uart_baud0"; - }; - - serial@12C30000 { - clocks = <&clock CLK_UART3>, <&clock CLK_SCLK_UART3>; - clock-names = "uart", "clk_uart_baud0"; - }; - sata: sata@122F0000 { compatible = "snps,dwc-ahci"; samsung,sata-freq = <66>; @@ -720,6 +696,7 @@ power-domains = <&pd_gsc>; clocks = <&clock CLK_GSCL0>; clock-names = "gscl"; + iommu = <&sysmmu_gsc0>; }; gsc_1: gsc@13e10000 { @@ -729,6 +706,7 @@ power-domains = <&pd_gsc>; clocks = <&clock CLK_GSCL1>; clock-names = "gscl"; + iommu = <&sysmmu_gsc1>; }; gsc_2: gsc@13e20000 { @@ -738,6 +716,7 @@ power-domains = <&pd_gsc>; clocks = <&clock CLK_GSCL2>; clock-names = "gscl"; + iommu = <&sysmmu_gsc2>; }; gsc_3: gsc@13e30000 { @@ -747,6 +726,7 @@ power-domains = <&pd_gsc>; clocks = <&clock CLK_GSCL3>; clock-names = "gscl"; + iommu = <&sysmmu_gsc3>; }; hdmi: hdmi { @@ -770,6 +750,7 @@ clocks = <&clock CLK_MIXER>, <&clock CLK_HDMI>, <&clock CLK_SCLK_HDMI>; clock-names = "mixer", "hdmi", "sclk_hdmi"; + iommus = <&sysmmu_tv>; }; dp_phy: video-phy@10040720 { @@ -778,20 +759,6 @@ #phy-cells = <0>; }; - dp: dp-controller@145B0000 { - power-domains = <&pd_disp1>; - clocks = <&clock CLK_DP>; - clock-names = "dp"; - phys = <&dp_phy>; - phy-names = "dp"; - }; - - fimd: fimd@14400000 { - power-domains = <&pd_disp1>; - clocks = <&clock CLK_SCLK_FIMD1>, <&clock CLK_FIMD1>; - clock-names = "sclk_fimd", "fimd"; - }; - adc: adc@12D10000 { compatible = "samsung,exynos-adc-v1"; reg = <0x12D10000 0x100>; @@ -811,4 +778,287 @@ clocks = <&clock CLK_SSS>; clock-names = "secss"; }; + + sysmmu_g2d: sysmmu@10A60000 { + compatible = "samsung,exynos-sysmmu"; + reg = <0x10A60000 0x1000>; + interrupt-parent = <&combiner>; + interrupts = <24 5>; + clock-names = "sysmmu", "master"; + clocks = <&clock CLK_SMMU_2D>, <&clock CLK_G2D>; + #iommu-cells = <0>; + }; + + sysmmu_mfc_r: sysmmu@11200000 { + compatible = "samsung,exynos-sysmmu"; + reg = <0x11200000 0x1000>; + interrupt-parent = <&combiner>; + interrupts = <6 2>; + power-domains = <&pd_mfc>; + clock-names = "sysmmu", "master"; + clocks = <&clock CLK_SMMU_MFCR>, <&clock CLK_MFC>; + #iommu-cells = <0>; + }; + + sysmmu_mfc_l: sysmmu@11210000 { + compatible = "samsung,exynos-sysmmu"; + reg = <0x11210000 0x1000>; + interrupt-parent = <&combiner>; + interrupts = <8 5>; + power-domains = <&pd_mfc>; + clock-names = "sysmmu", "master"; + clocks = <&clock CLK_SMMU_MFCL>, <&clock CLK_MFC>; + #iommu-cells = <0>; + }; + + sysmmu_rotator: sysmmu@11D40000 { + compatible = "samsung,exynos-sysmmu"; + reg = <0x11D40000 0x1000>; + interrupt-parent = <&combiner>; + interrupts = <4 0>; + clock-names = "sysmmu", "master"; + clocks = <&clock CLK_SMMU_ROTATOR>, <&clock CLK_ROTATOR>; + #iommu-cells = <0>; + }; + + sysmmu_jpeg: sysmmu@11F20000 { + compatible = "samsung,exynos-sysmmu"; + reg = <0x11F20000 0x1000>; + interrupt-parent = <&combiner>; + interrupts = <4 2>; + power-domains = <&pd_gsc>; + clock-names = "sysmmu", "master"; + clocks = <&clock CLK_SMMU_JPEG>, <&clock CLK_JPEG>; + #iommu-cells = <0>; + }; + + sysmmu_fimc_isp: sysmmu@13260000 { + compatible = "samsung,exynos-sysmmu"; + reg = <0x13260000 0x1000>; + interrupt-parent = <&combiner>; + interrupts = <10 6>; + clock-names = "sysmmu"; + clocks = <&clock CLK_SMMU_FIMC_ISP>; + #iommu-cells = <0>; + }; + + sysmmu_fimc_drc: sysmmu@13270000 { + compatible = "samsung,exynos-sysmmu"; + reg = <0x13270000 0x1000>; + interrupt-parent = <&combiner>; + interrupts = <11 6>; + clock-names = "sysmmu"; + clocks = <&clock CLK_SMMU_FIMC_DRC>; + #iommu-cells = <0>; + }; + + sysmmu_fimc_fd: sysmmu@132A0000 { + compatible = "samsung,exynos-sysmmu"; + reg = <0x132A0000 0x1000>; + interrupt-parent = <&combiner>; + interrupts = <5 0>; + clock-names = "sysmmu"; + clocks = <&clock CLK_SMMU_FIMC_FD>; + #iommu-cells = <0>; + }; + + sysmmu_fimc_scc: sysmmu@13280000 { + compatible = "samsung,exynos-sysmmu"; + reg = <0x13280000 0x1000>; + interrupt-parent = <&combiner>; + interrupts = <5 2>; + clock-names = "sysmmu"; + clocks = <&clock CLK_SMMU_FIMC_SCC>; + #iommu-cells = <0>; + }; + + sysmmu_fimc_scp: sysmmu@13290000 { + compatible = "samsung,exynos-sysmmu"; + reg = <0x13290000 0x1000>; + interrupt-parent = <&combiner>; + interrupts = <3 6>; + clock-names = "sysmmu"; + clocks = <&clock CLK_SMMU_FIMC_SCP>; + #iommu-cells = <0>; + }; + + sysmmu_fimc_mcuctl: sysmmu@132B0000 { + compatible = "samsung,exynos-sysmmu"; + reg = <0x132B0000 0x1000>; + interrupt-parent = <&combiner>; + interrupts = <5 4>; + clock-names = "sysmmu"; + clocks = <&clock CLK_SMMU_FIMC_MCU>; + #iommu-cells = <0>; + }; + + sysmmu_fimc_odc: sysmmu@132C0000 { + compatible = "samsung,exynos-sysmmu"; + reg = <0x132C0000 0x1000>; + interrupt-parent = <&combiner>; + interrupts = <11 0>; + clock-names = "sysmmu"; + clocks = <&clock CLK_SMMU_FIMC_ODC>; + #iommu-cells = <0>; + }; + + sysmmu_fimc_dis0: sysmmu@132D0000 { + compatible = "samsung,exynos-sysmmu"; + reg = <0x132D0000 0x1000>; + interrupt-parent = <&combiner>; + interrupts = <10 4>; + clock-names = "sysmmu"; + clocks = <&clock CLK_SMMU_FIMC_DIS0>; + #iommu-cells = <0>; + }; + + sysmmu_fimc_dis1: sysmmu@132E0000{ + compatible = "samsung,exynos-sysmmu"; + reg = <0x132E0000 0x1000>; + interrupt-parent = <&combiner>; + interrupts = <9 4>; + clock-names = "sysmmu"; + clocks = <&clock CLK_SMMU_FIMC_DIS1>; + #iommu-cells = <0>; + }; + + sysmmu_fimc_3dnr: sysmmu@132F0000 { + compatible = "samsung,exynos-sysmmu"; + reg = <0x132F0000 0x1000>; + interrupt-parent = <&combiner>; + interrupts = <5 6>; + clock-names = "sysmmu"; + clocks = <&clock CLK_SMMU_FIMC_3DNR>; + #iommu-cells = <0>; + }; + + sysmmu_fimc_lite0: sysmmu@13C40000 { + compatible = "samsung,exynos-sysmmu"; + reg = <0x13C40000 0x1000>; + interrupt-parent = <&combiner>; + interrupts = <3 4>; + power-domains = <&pd_gsc>; + clock-names = "sysmmu", "master"; + clocks = <&clock CLK_SMMU_FIMC_LITE0>, <&clock CLK_CAMIF_TOP>; + #iommu-cells = <0>; + }; + + sysmmu_fimc_lite1: sysmmu@13C50000 { + compatible = "samsung,exynos-sysmmu"; + reg = <0x13C50000 0x1000>; + interrupt-parent = <&combiner>; + interrupts = <24 1>; + power-domains = <&pd_gsc>; + clock-names = "sysmmu", "master"; + clocks = <&clock CLK_SMMU_FIMC_LITE1>, <&clock CLK_CAMIF_TOP>; + #iommu-cells = <0>; + }; + + sysmmu_gsc0: sysmmu@13E80000 { + compatible = "samsung,exynos-sysmmu"; + reg = <0x13E80000 0x1000>; + interrupt-parent = <&combiner>; + interrupts = <2 0>; + power-domains = <&pd_gsc>; + clock-names = "sysmmu", "master"; + clocks = <&clock CLK_SMMU_GSCL0>, <&clock CLK_GSCL0>; + #iommu-cells = <0>; + }; + + sysmmu_gsc1: sysmmu@13E90000 { + compatible = "samsung,exynos-sysmmu"; + reg = <0x13E90000 0x1000>; + interrupt-parent = <&combiner>; + interrupts = <2 2>; + power-domains = <&pd_gsc>; + clock-names = "sysmmu", "master"; + clocks = <&clock CLK_SMMU_GSCL1>, <&clock CLK_GSCL1>; + #iommu-cells = <0>; + }; + + sysmmu_gsc2: sysmmu@13EA0000 { + compatible = "samsung,exynos-sysmmu"; + reg = <0x13EA0000 0x1000>; + interrupt-parent = <&combiner>; + interrupts = <2 4>; + power-domains = <&pd_gsc>; + clock-names = "sysmmu", "master"; + clocks = <&clock CLK_SMMU_GSCL2>, <&clock CLK_GSCL2>; + #iommu-cells = <0>; + }; + + sysmmu_gsc3: sysmmu@13EB0000 { + compatible = "samsung,exynos-sysmmu"; + reg = <0x13EB0000 0x1000>; + interrupt-parent = <&combiner>; + interrupts = <2 6>; + power-domains = <&pd_gsc>; + clock-names = "sysmmu", "master"; + clocks = <&clock CLK_SMMU_GSCL3>, <&clock CLK_GSCL3>; + #iommu-cells = <0>; + }; + + sysmmu_fimd1: sysmmu@14640000 { + compatible = "samsung,exynos-sysmmu"; + reg = <0x14640000 0x1000>; + interrupt-parent = <&combiner>; + interrupts = <3 2>; + power-domains = <&pd_disp1>; + clock-names = "sysmmu", "master"; + clocks = <&clock CLK_SMMU_FIMD1>, <&clock CLK_FIMD1>; + #iommu-cells = <0>; + }; + + sysmmu_tv: sysmmu@14650000 { + compatible = "samsung,exynos-sysmmu"; + reg = <0x14650000 0x1000>; + interrupt-parent = <&combiner>; + interrupts = <7 4>; + power-domains = <&pd_disp1>; + clock-names = "sysmmu", "master"; + clocks = <&clock CLK_SMMU_TV>, <&clock CLK_MIXER>; + #iommu-cells = <0>; + }; +}; + +&dp { + power-domains = <&pd_disp1>; + clocks = <&clock CLK_DP>; + clock-names = "dp"; + phys = <&dp_phy>; + phy-names = "dp"; +}; + +&fimd { + power-domains = <&pd_disp1>; + clocks = <&clock CLK_SCLK_FIMD1>, <&clock CLK_FIMD1>; + clock-names = "sclk_fimd", "fimd"; + iommus = <&sysmmu_fimd1>; +}; + +&rtc { + clocks = <&clock CLK_RTC>; + clock-names = "rtc"; + interrupt-parent = <&pmu_system_controller>; + status = "disabled"; +}; + +&serial_0 { + clocks = <&clock CLK_UART0>, <&clock CLK_SCLK_UART0>; + clock-names = "uart", "clk_uart_baud0"; +}; + +&serial_1 { + clocks = <&clock CLK_UART1>, <&clock CLK_SCLK_UART1>; + clock-names = "uart", "clk_uart_baud0"; +}; + +&serial_2 { + clocks = <&clock CLK_UART2>, <&clock CLK_SCLK_UART2>; + clock-names = "uart", "clk_uart_baud0"; +}; + +&serial_3 { + clocks = <&clock CLK_UART3>, <&clock CLK_SCLK_UART3>; + clock-names = "uart", "clk_uart_baud0"; }; diff --git a/arch/arm/boot/dts/exynos5260-xyref5260.dts b/arch/arm/boot/dts/exynos5260-xyref5260.dts index a803b6050..3daef94be 100644 --- a/arch/arm/boot/dts/exynos5260-xyref5260.dts +++ b/arch/arm/boot/dts/exynos5260-xyref5260.dts @@ -70,7 +70,7 @@ broken-cd; bypass-smu; cap-mmc-highspeed; - supports-hs200-mode; /* 200 Mhz */ + supports-hs200-mode; /* 200 MHz */ card-detect-delay = <200>; samsung,dw-mshc-ciu-div = <3>; samsung,dw-mshc-sdr-timing = <0 4>; diff --git a/arch/arm/boot/dts/exynos5420-arndale-octa.dts b/arch/arm/boot/dts/exynos5420-arndale-octa.dts index b82b6fa15..eeb4ac22c 100644 --- a/arch/arm/boot/dts/exynos5420-arndale-octa.dts +++ b/arch/arm/boot/dts/exynos5420-arndale-octa.dts @@ -13,6 +13,7 @@ #include "exynos5420.dtsi" #include <dt-bindings/interrupt-controller/irq.h> #include <dt-bindings/input/input.h> +#include <dt-bindings/clock/samsung,s2mps11.h> / { model = "Insignal Arndale Octa evaluation board based on EXYNOS5420"; @@ -38,325 +39,6 @@ }; }; - rtc@101E0000 { - status = "okay"; - }; - - codec@11000000 { - samsung,mfc-r = <0x43000000 0x800000>; - samsung,mfc-l = <0x51000000 0x800000>; - }; - - mmc@12200000 { - status = "okay"; - broken-cd; - card-detect-delay = <200>; - samsung,dw-mshc-ciu-div = <3>; - samsung,dw-mshc-sdr-timing = <0 4>; - samsung,dw-mshc-ddr-timing = <0 2>; - pinctrl-names = "default"; - pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus1 &sd0_bus4 &sd0_bus8>; - vmmc-supply = <&ldo10_reg>; - bus-width = <8>; - cap-mmc-highspeed; - }; - - mmc@12220000 { - status = "okay"; - card-detect-delay = <200>; - samsung,dw-mshc-ciu-div = <3>; - samsung,dw-mshc-sdr-timing = <2 3>; - samsung,dw-mshc-ddr-timing = <1 2>; - pinctrl-names = "default"; - pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus1 &sd2_bus4>; - vmmc-supply = <&ldo19_reg>; - vqmmc-supply = <&ldo13_reg>; - bus-width = <4>; - cap-sd-highspeed; - }; - - hsi2c_4: i2c@12CA0000 { - status = "okay"; - - s2mps11_pmic@66 { - compatible = "samsung,s2mps11-pmic"; - reg = <0x66>; - s2mps11,buck2-ramp-delay = <12>; - s2mps11,buck34-ramp-delay = <12>; - s2mps11,buck16-ramp-delay = <12>; - s2mps11,buck6-ramp-enable = <1>; - s2mps11,buck2-ramp-enable = <1>; - s2mps11,buck3-ramp-enable = <1>; - s2mps11,buck4-ramp-enable = <1>; - - interrupt-parent = <&gpx3>; - interrupts = <2 IRQ_TYPE_LEVEL_HIGH>; - - s2mps11_osc: clocks { - #clock-cells = <1>; - clock-output-names = "s2mps11_ap", - "s2mps11_cp", "s2mps11_bt"; - }; - - regulators { - ldo1_reg: LDO1 { - regulator-name = "PVDD_ALIVE_1V0"; - regulator-min-microvolt = <1000000>; - regulator-max-microvolt = <1000000>; - regulator-always-on; - }; - - ldo2_reg: LDO2 { - regulator-name = "PVDD_APIO_1V8"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - ldo3_reg: LDO3 { - regulator-name = "PVDD_APIO_MMCON_1V8"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-always-on; - }; - - ldo4_reg: LDO4 { - regulator-name = "PVDD_ADC_1V8"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - ldo5_reg: LDO5 { - regulator-name = "PVDD_PLL_1V8"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-always-on; - }; - - ldo6_reg: LDO6 { - regulator-name = "PVDD_ANAIP_1V0"; - regulator-min-microvolt = <1000000>; - regulator-max-microvolt = <1000000>; - }; - - ldo7_reg: LDO7 { - regulator-name = "PVDD_ANAIP_1V8"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - ldo8_reg: LDO8 { - regulator-name = "PVDD_ABB_1V8"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - ldo9_reg: LDO9 { - regulator-name = "PVDD_USB_3V3"; - regulator-min-microvolt = <3000000>; - regulator-max-microvolt = <3000000>; - regulator-always-on; - }; - - ldo10_reg: LDO10 { - regulator-name = "PVDD_PRE_1V8"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-always-on; - }; - - ldo11_reg: LDO11 { - regulator-name = "PVDD_USB_1V0"; - regulator-min-microvolt = <1000000>; - regulator-max-microvolt = <1000000>; - regulator-always-on; - }; - - ldo12_reg: LDO12 { - regulator-name = "PVDD_HSIC_1V8"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - ldo13_reg: LDO13 { - regulator-name = "PVDD_APIO_MMCOFF_2V8"; - regulator-min-microvolt = <2800000>; - regulator-max-microvolt = <2800000>; - }; - - ldo15_reg: LDO15 { - regulator-name = "PVDD_PERI_2V8"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - }; - - ldo16_reg: LDO16 { - regulator-name = "PVDD_PERI_3V3"; - regulator-min-microvolt = <2200000>; - regulator-max-microvolt = <2200000>; - }; - - ldo18_reg: LDO18 { - regulator-name = "PVDD_EMMC_1V8"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - ldo19_reg: LDO19 { - regulator-name = "PVDD_TFLASH_2V8"; - regulator-min-microvolt = <2800000>; - regulator-max-microvolt = <2800000>; - }; - - ldo20_reg: LDO20 { - regulator-name = "PVDD_BTWIFI_1V8"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - ldo21_reg: LDO21 { - regulator-name = "PVDD_CAM1IO_1V8"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - ldo23_reg: LDO23 { - regulator-name = "PVDD_MIFS_1V1"; - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1200000>; - regulator-always-on; - }; - - ldo24_reg: LDO24 { - regulator-name = "PVDD_CAM1_AVDD_2V8"; - regulator-min-microvolt = <2800000>; - regulator-max-microvolt = <2800000>; - }; - - ldo26_reg: LDO26 { - regulator-name = "PVDD_CAM0_AF_2V8"; - regulator-min-microvolt = <3000000>; - regulator-max-microvolt = <3000000>; - }; - - ldo27_reg: LDO27 { - regulator-name = "PVDD_G3DS_1V0"; - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1200000>; - }; - - ldo28_reg: LDO28 { - regulator-name = "PVDD_TSP_3V3"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - }; - - ldo29_reg: LDO29 { - regulator-name = "PVDD_AUDIO_1V8"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - ldo31_reg: LDO31 { - regulator-name = "PVDD_PERI_1V8"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - ldo32_reg: LDO32 { - regulator-name = "PVDD_LCD_1V8"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - ldo33_reg: LDO33 { - regulator-name = "PVDD_CAM0IO_1V8"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - ldo35_reg: LDO35 { - regulator-name = "PVDD_CAM0_DVDD_1V2"; - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1200000>; - }; - - ldo38_reg: LDO38 { - regulator-name = "PVDD_CAM0_AVDD_2V8"; - regulator-min-microvolt = <2800000>; - regulator-max-microvolt = <2800000>; - }; - - buck1_reg: BUCK1 { - regulator-name = "PVDD_MIF_1V1"; - regulator-min-microvolt = <800000>; - regulator-max-microvolt = <1100000>; - regulator-always-on; - }; - - buck2_reg: BUCK2 { - regulator-name = "vdd_arm"; - regulator-min-microvolt = <800000>; - regulator-max-microvolt = <1000000>; - regulator-always-on; - }; - - buck3_reg: BUCK3 { - regulator-name = "PVDD_INT_1V0"; - regulator-min-microvolt = <800000>; - regulator-max-microvolt = <1000000>; - regulator-always-on; - }; - - buck4_reg: BUCK4 { - regulator-name = "PVDD_G3D_1V0"; - regulator-min-microvolt = <800000>; - regulator-max-microvolt = <1000000>; - }; - - buck5_reg: BUCK5 { - regulator-name = "PVDD_LPDDR3_1V2"; - regulator-min-microvolt = <800000>; - regulator-max-microvolt = <1200000>; - regulator-always-on; - }; - - buck6_reg: BUCK6 { - regulator-name = "PVDD_KFC_1V0"; - regulator-min-microvolt = <800000>; - regulator-max-microvolt = <1000000>; - regulator-always-on; - }; - - buck7_reg: BUCK7 { - regulator-name = "VIN_LLDO_1V4"; - regulator-min-microvolt = <800000>; - regulator-max-microvolt = <1400000>; - regulator-always-on; - }; - - buck8_reg: BUCK8 { - regulator-name = "VIN_MLDO_2V0"; - regulator-min-microvolt = <800000>; - regulator-max-microvolt = <2000000>; - regulator-always-on; - }; - - buck9_reg: BUCK9 { - regulator-name = "VIN_HLDO_3V5"; - regulator-min-microvolt = <3000000>; - regulator-max-microvolt = <3500000>; - regulator-always-on; - }; - - buck10_reg: BUCK10 { - regulator-name = "PVDD_EMMCF_2V8"; - regulator-min-microvolt = <2800000>; - regulator-max-microvolt = <2800000>; - }; - }; - }; - }; - gpio_keys { compatible = "gpio-keys"; @@ -376,3 +58,335 @@ &cci { status = "disabled"; }; + +&hsi2c_4 { + status = "okay"; + + s2mps11_pmic@66 { + compatible = "samsung,s2mps11-pmic"; + reg = <0x66>; + s2mps11,buck2-ramp-delay = <12>; + s2mps11,buck34-ramp-delay = <12>; + s2mps11,buck16-ramp-delay = <12>; + s2mps11,buck6-ramp-enable = <1>; + s2mps11,buck2-ramp-enable = <1>; + s2mps11,buck3-ramp-enable = <1>; + s2mps11,buck4-ramp-enable = <1>; + + interrupt-parent = <&gpx3>; + interrupts = <2 IRQ_TYPE_EDGE_FALLING>; + pinctrl-names = "default"; + pinctrl-0 = <&s2mps11_irq>; + + s2mps11_osc: clocks { + #clock-cells = <1>; + clock-output-names = "s2mps11_ap", + "s2mps11_cp", "s2mps11_bt"; + }; + + regulators { + ldo1_reg: LDO1 { + regulator-name = "PVDD_ALIVE_1V0"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-always-on; + }; + + ldo2_reg: LDO2 { + regulator-name = "PVDD_APIO_1V8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + ldo3_reg: LDO3 { + regulator-name = "PVDD_APIO_MMCON_1V8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + ldo4_reg: LDO4 { + regulator-name = "PVDD_ADC_1V8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + ldo5_reg: LDO5 { + regulator-name = "PVDD_PLL_1V8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + ldo6_reg: LDO6 { + regulator-name = "PVDD_ANAIP_1V0"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + }; + + ldo7_reg: LDO7 { + regulator-name = "PVDD_ANAIP_1V8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + ldo8_reg: LDO8 { + regulator-name = "PVDD_ABB_1V8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + ldo9_reg: LDO9 { + regulator-name = "PVDD_USB_3V3"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-always-on; + }; + + ldo10_reg: LDO10 { + regulator-name = "PVDD_PRE_1V8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + ldo11_reg: LDO11 { + regulator-name = "PVDD_USB_1V0"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-always-on; + }; + + ldo12_reg: LDO12 { + regulator-name = "PVDD_HSIC_1V8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + ldo13_reg: LDO13 { + regulator-name = "PVDD_APIO_MMCOFF_2V8"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + }; + + ldo15_reg: LDO15 { + regulator-name = "PVDD_PERI_2V8"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + ldo16_reg: LDO16 { + regulator-name = "PVDD_PERI_3V3"; + regulator-min-microvolt = <2200000>; + regulator-max-microvolt = <2200000>; + }; + + ldo18_reg: LDO18 { + regulator-name = "PVDD_EMMC_1V8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + ldo19_reg: LDO19 { + regulator-name = "PVDD_TFLASH_2V8"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + }; + + ldo20_reg: LDO20 { + regulator-name = "PVDD_BTWIFI_1V8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + ldo21_reg: LDO21 { + regulator-name = "PVDD_CAM1IO_1V8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + ldo23_reg: LDO23 { + regulator-name = "PVDD_MIFS_1V1"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + }; + + ldo24_reg: LDO24 { + regulator-name = "PVDD_CAM1_AVDD_2V8"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + }; + + ldo26_reg: LDO26 { + regulator-name = "PVDD_CAM0_AF_2V8"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + }; + + ldo27_reg: LDO27 { + regulator-name = "PVDD_G3DS_1V0"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + ldo28_reg: LDO28 { + regulator-name = "PVDD_TSP_3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + ldo29_reg: LDO29 { + regulator-name = "PVDD_AUDIO_1V8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + ldo31_reg: LDO31 { + regulator-name = "PVDD_PERI_1V8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + ldo32_reg: LDO32 { + regulator-name = "PVDD_LCD_1V8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + ldo33_reg: LDO33 { + regulator-name = "PVDD_CAM0IO_1V8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + ldo35_reg: LDO35 { + regulator-name = "PVDD_CAM0_DVDD_1V2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + ldo38_reg: LDO38 { + regulator-name = "PVDD_CAM0_AVDD_2V8"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + }; + + buck1_reg: BUCK1 { + regulator-name = "PVDD_MIF_1V1"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1100000>; + regulator-always-on; + }; + + buck2_reg: BUCK2 { + regulator-name = "vdd_arm"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1000000>; + regulator-always-on; + }; + + buck3_reg: BUCK3 { + regulator-name = "PVDD_INT_1V0"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1000000>; + regulator-always-on; + }; + + buck4_reg: BUCK4 { + regulator-name = "PVDD_G3D_1V0"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1000000>; + }; + + buck5_reg: BUCK5 { + regulator-name = "PVDD_LPDDR3_1V2"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + }; + + buck6_reg: BUCK6 { + regulator-name = "PVDD_KFC_1V0"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1000000>; + regulator-always-on; + }; + + buck7_reg: BUCK7 { + regulator-name = "VIN_LLDO_1V4"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1400000>; + regulator-always-on; + }; + + buck8_reg: BUCK8 { + regulator-name = "VIN_MLDO_2V0"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <2000000>; + regulator-always-on; + }; + + buck9_reg: BUCK9 { + regulator-name = "VIN_HLDO_3V5"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3500000>; + regulator-always-on; + }; + + buck10_reg: BUCK10 { + regulator-name = "PVDD_EMMCF_2V8"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + }; + }; + }; +}; + +&mfc { + samsung,mfc-r = <0x43000000 0x800000>; + samsung,mfc-l = <0x51000000 0x800000>; +}; + +&mmc_0 { + status = "okay"; + broken-cd; + card-detect-delay = <200>; + samsung,dw-mshc-ciu-div = <3>; + samsung,dw-mshc-sdr-timing = <0 4>; + samsung,dw-mshc-ddr-timing = <0 2>; + pinctrl-names = "default"; + pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus1 &sd0_bus4 &sd0_bus8>; + vmmc-supply = <&ldo10_reg>; + bus-width = <8>; + cap-mmc-highspeed; +}; + +&mmc_2 { + status = "okay"; + card-detect-delay = <200>; + samsung,dw-mshc-ciu-div = <3>; + samsung,dw-mshc-sdr-timing = <2 3>; + samsung,dw-mshc-ddr-timing = <1 2>; + pinctrl-names = "default"; + pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus1 &sd2_bus4>; + vmmc-supply = <&ldo19_reg>; + vqmmc-supply = <&ldo13_reg>; + bus-width = <4>; + cap-sd-highspeed; +}; + +&pinctrl_0 { + s2mps11_irq: s2mps11-irq { + samsung,pins = "gpx3-2"; + samsung,pin-function = <0xf>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; +}; + +&rtc { + status = "okay"; + clocks = <&clock CLK_RTC>, <&s2mps11_osc S2MPS11_CLK_AP>; + clock-names = "rtc", "rtc_src"; +}; diff --git a/arch/arm/boot/dts/exynos5420-peach-pit.dts b/arch/arm/boot/dts/exynos5420-peach-pit.dts index 146e71118..8f4d76c5e 100644 --- a/arch/arm/boot/dts/exynos5420-peach-pit.dts +++ b/arch/arm/boot/dts/exynos5420-peach-pit.dts @@ -1027,7 +1027,7 @@ }; }; -&uart_3 { +&serial_3 { status = "okay"; }; diff --git a/arch/arm/boot/dts/exynos5420-smdk5420.dts b/arch/arm/boot/dts/exynos5420-smdk5420.dts index 9103f2381..98871f972 100644 --- a/arch/arm/boot/dts/exynos5420-smdk5420.dts +++ b/arch/arm/boot/dts/exynos5420-smdk5420.dts @@ -64,105 +64,6 @@ }; }; - rtc@101E0000 { - status = "okay"; - }; - - codec@11000000 { - samsung,mfc-r = <0x43000000 0x800000>; - samsung,mfc-l = <0x51000000 0x800000>; - }; - - mmc@12200000 { - status = "okay"; - broken-cd; - card-detect-delay = <200>; - samsung,dw-mshc-ciu-div = <3>; - samsung,dw-mshc-sdr-timing = <0 4>; - samsung,dw-mshc-ddr-timing = <0 2>; - samsung,dw-mshc-hs400-timing = <0 2>; - samsung,read-strobe-delay = <90>; - pinctrl-names = "default"; - pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus1 &sd0_bus4 &sd0_bus8 - &sd0_rclk>; - bus-width = <8>; - cap-mmc-highspeed; - }; - - mmc@12220000 { - status = "okay"; - card-detect-delay = <200>; - samsung,dw-mshc-ciu-div = <3>; - samsung,dw-mshc-sdr-timing = <2 3>; - samsung,dw-mshc-ddr-timing = <1 2>; - pinctrl-names = "default"; - pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus1 &sd2_bus4>; - bus-width = <4>; - cap-sd-highspeed; - }; - - dp-controller@145B0000 { - pinctrl-names = "default"; - pinctrl-0 = <&dp_hpd>; - samsung,color-space = <0>; - samsung,dynamic-range = <0>; - samsung,ycbcr-coeff = <0>; - samsung,color-depth = <1>; - samsung,link-rate = <0x0a>; - samsung,lane-count = <4>; - status = "okay"; - }; - - fimd@14400000 { - status = "okay"; - display-timings { - native-mode = <&timing0>; - timing0: timing@0 { - clock-frequency = <50000>; - hactive = <2560>; - vactive = <1600>; - hfront-porch = <48>; - hback-porch = <80>; - hsync-len = <32>; - vback-porch = <16>; - vfront-porch = <8>; - vsync-len = <6>; - }; - }; - }; - - pinctrl@13400000 { - hdmi_hpd_irq: hdmi-hpd-irq { - samsung,pins = "gpx3-7"; - samsung,pin-function = <0>; - samsung,pin-pud = <1>; - samsung,pin-drv = <0>; - }; - }; - - pinctrl@14000000 { - usb300_vbus_en: usb300-vbus-en { - samsung,pins = "gpg0-5"; - samsung,pin-function = <1>; - samsung,pin-pud = <0>; - samsung,pin-drv = <0>; - }; - - usb301_vbus_en: usb301-vbus-en { - samsung,pins = "gpg1-4"; - samsung,pin-function = <1>; - samsung,pin-pud = <0>; - samsung,pin-drv = <0>; - }; - }; - - hdmi@14530000 { - status = "okay"; - hpd-gpio = <&gpx3 7 0>; - pinctrl-names = "default"; - pinctrl-0 = <&hdmi_hpd_irq>; - }; - usb300_vbus_reg: regulator-usb300 { compatible = "regulator-fixed"; regulator-name = "VBUS0"; @@ -185,238 +86,338 @@ enable-active-high; }; - phy@12100000 { - vbus-supply = <&usb300_vbus_reg>; - }; +}; - phy@12500000 { - vbus-supply = <&usb301_vbus_reg>; +&dp { + pinctrl-names = "default"; + pinctrl-0 = <&dp_hpd>; + samsung,color-space = <0>; + samsung,dynamic-range = <0>; + samsung,ycbcr-coeff = <0>; + samsung,color-depth = <1>; + samsung,link-rate = <0x0a>; + samsung,lane-count = <4>; + status = "okay"; +}; + +&fimd { + status = "okay"; + display-timings { + native-mode = <&timing0>; + timing0: timing@0 { + clock-frequency = <50000>; + hactive = <2560>; + vactive = <1600>; + hfront-porch = <48>; + hback-porch = <80>; + hsync-len = <32>; + vback-porch = <16>; + vfront-porch = <8>; + vsync-len = <6>; + }; }; +}; - i2c_2: i2c@12C80000 { - samsung,i2c-sda-delay = <100>; - samsung,i2c-max-bus-freq = <66000>; - status = "okay"; +&hdmi { + status = "okay"; + hpd-gpio = <&gpx3 7 0>; + pinctrl-names = "default"; + pinctrl-0 = <&hdmi_hpd_irq>; +}; - hdmiddc@50 { - compatible = "samsung,exynos4210-hdmiddc"; - reg = <0x50>; +&hsi2c_4 { + status = "okay"; + + s2mps11_pmic@66 { + compatible = "samsung,s2mps11-pmic"; + reg = <0x66>; + s2mps11,buck2-ramp-delay = <12>; + s2mps11,buck34-ramp-delay = <12>; + s2mps11,buck16-ramp-delay = <12>; + s2mps11,buck6-ramp-enable = <1>; + s2mps11,buck2-ramp-enable = <1>; + s2mps11,buck3-ramp-enable = <1>; + s2mps11,buck4-ramp-enable = <1>; + + s2mps11_osc: clocks { + #clock-cells = <1>; + clock-output-names = "s2mps11_ap", + "s2mps11_cp", "s2mps11_bt"; }; - }; - hsi2c_4: i2c@12CA0000 { - status = "okay"; - - s2mps11_pmic@66 { - compatible = "samsung,s2mps11-pmic"; - reg = <0x66>; - s2mps11,buck2-ramp-delay = <12>; - s2mps11,buck34-ramp-delay = <12>; - s2mps11,buck16-ramp-delay = <12>; - s2mps11,buck6-ramp-enable = <1>; - s2mps11,buck2-ramp-enable = <1>; - s2mps11,buck3-ramp-enable = <1>; - s2mps11,buck4-ramp-enable = <1>; - - s2mps11_osc: clocks { - #clock-cells = <1>; - clock-output-names = "s2mps11_ap", - "s2mps11_cp", "s2mps11_bt"; + regulators { + ldo1_reg: LDO1 { + regulator-name = "vdd_ldo1"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-always-on; + }; + + ldo3_reg: LDO3 { + regulator-name = "vdd_ldo3"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + ldo5_reg: LDO5 { + regulator-name = "vdd_ldo5"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + ldo6_reg: LDO6 { + regulator-name = "vdd_ldo6"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-always-on; + }; + + ldo7_reg: LDO7 { + regulator-name = "vdd_ldo7"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + ldo8_reg: LDO8 { + regulator-name = "vdd_ldo8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + ldo9_reg: LDO9 { + regulator-name = "vdd_ldo9"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-always-on; + }; + + ldo10_reg: LDO10 { + regulator-name = "vdd_ldo10"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + ldo11_reg: LDO11 { + regulator-name = "vdd_ldo11"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-always-on; + }; + + ldo12_reg: LDO12 { + regulator-name = "vdd_ldo12"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; }; - regulators { - ldo1_reg: LDO1 { - regulator-name = "vdd_ldo1"; - regulator-min-microvolt = <1000000>; - regulator-max-microvolt = <1000000>; - regulator-always-on; - }; - - ldo3_reg: LDO3 { - regulator-name = "vdd_ldo3"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-always-on; - }; - - ldo5_reg: LDO5 { - regulator-name = "vdd_ldo5"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-always-on; - }; - - ldo6_reg: LDO6 { - regulator-name = "vdd_ldo6"; - regulator-min-microvolt = <1000000>; - regulator-max-microvolt = <1000000>; - regulator-always-on; - }; - - ldo7_reg: LDO7 { - regulator-name = "vdd_ldo7"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-always-on; - }; - - ldo8_reg: LDO8 { - regulator-name = "vdd_ldo8"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-always-on; - }; - - ldo9_reg: LDO9 { - regulator-name = "vdd_ldo9"; - regulator-min-microvolt = <3000000>; - regulator-max-microvolt = <3000000>; - regulator-always-on; - }; - - ldo10_reg: LDO10 { - regulator-name = "vdd_ldo10"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-always-on; - }; - - ldo11_reg: LDO11 { - regulator-name = "vdd_ldo11"; - regulator-min-microvolt = <1000000>; - regulator-max-microvolt = <1000000>; - regulator-always-on; - }; - - ldo12_reg: LDO12 { - regulator-name = "vdd_ldo12"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-always-on; - }; - - ldo13_reg: LDO13 { - regulator-name = "vdd_ldo13"; - regulator-min-microvolt = <2800000>; - regulator-max-microvolt = <2800000>; - regulator-always-on; - }; - - ldo15_reg: LDO15 { - regulator-name = "vdd_ldo15"; - regulator-min-microvolt = <3100000>; - regulator-max-microvolt = <3100000>; - regulator-always-on; - }; - - ldo16_reg: LDO16 { - regulator-name = "vdd_ldo16"; - regulator-min-microvolt = <2200000>; - regulator-max-microvolt = <2200000>; - regulator-always-on; - }; - - ldo17_reg: LDO17 { - regulator-name = "tsp_avdd"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - }; - - ldo19_reg: LDO19 { - regulator-name = "vdd_sd"; - regulator-min-microvolt = <2800000>; - regulator-max-microvolt = <2800000>; - regulator-always-on; - }; - - ldo24_reg: LDO24 { - regulator-name = "tsp_io"; - regulator-min-microvolt = <2800000>; - regulator-max-microvolt = <2800000>; - regulator-always-on; - }; - - buck1_reg: BUCK1 { - regulator-name = "vdd_mif"; - regulator-min-microvolt = <800000>; - regulator-max-microvolt = <1300000>; - regulator-always-on; - regulator-boot-on; - }; - - buck2_reg: BUCK2 { - regulator-name = "vdd_arm"; - regulator-min-microvolt = <800000>; - regulator-max-microvolt = <1500000>; - regulator-always-on; - regulator-boot-on; - }; - - buck3_reg: BUCK3 { - regulator-name = "vdd_int"; - regulator-min-microvolt = <800000>; - regulator-max-microvolt = <1400000>; - regulator-always-on; - regulator-boot-on; - }; - - buck4_reg: BUCK4 { - regulator-name = "vdd_g3d"; - regulator-min-microvolt = <800000>; - regulator-max-microvolt = <1400000>; - regulator-always-on; - regulator-boot-on; - }; - - buck5_reg: BUCK5 { - regulator-name = "vdd_mem"; - regulator-min-microvolt = <800000>; - regulator-max-microvolt = <1400000>; - regulator-always-on; - regulator-boot-on; - }; - - buck6_reg: BUCK6 { - regulator-name = "vdd_kfc"; - regulator-min-microvolt = <800000>; - regulator-max-microvolt = <1500000>; - regulator-always-on; - regulator-boot-on; - }; - - buck7_reg: BUCK7 { - regulator-name = "vdd_1.0v_ldo"; - regulator-min-microvolt = <800000>; - regulator-max-microvolt = <1500000>; - regulator-always-on; - regulator-boot-on; - }; - - buck8_reg: BUCK8 { - regulator-name = "vdd_1.8v_ldo"; - regulator-min-microvolt = <800000>; - regulator-max-microvolt = <1500000>; - regulator-always-on; - regulator-boot-on; - }; - - buck9_reg: BUCK9 { - regulator-name = "vdd_2.8v_ldo"; - regulator-min-microvolt = <3000000>; - regulator-max-microvolt = <3750000>; - regulator-always-on; - regulator-boot-on; - }; - - buck10_reg: BUCK10 { - regulator-name = "vdd_vmem"; - regulator-min-microvolt = <2850000>; - regulator-max-microvolt = <2850000>; - regulator-always-on; - regulator-boot-on; - }; + ldo13_reg: LDO13 { + regulator-name = "vdd_ldo13"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-always-on; + }; + + ldo15_reg: LDO15 { + regulator-name = "vdd_ldo15"; + regulator-min-microvolt = <3100000>; + regulator-max-microvolt = <3100000>; + regulator-always-on; + }; + + ldo16_reg: LDO16 { + regulator-name = "vdd_ldo16"; + regulator-min-microvolt = <2200000>; + regulator-max-microvolt = <2200000>; + regulator-always-on; + }; + + ldo17_reg: LDO17 { + regulator-name = "tsp_avdd"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + ldo19_reg: LDO19 { + regulator-name = "vdd_sd"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-always-on; + }; + + ldo24_reg: LDO24 { + regulator-name = "tsp_io"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-always-on; + }; + + buck1_reg: BUCK1 { + regulator-name = "vdd_mif"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1300000>; + regulator-always-on; + regulator-boot-on; + }; + + buck2_reg: BUCK2 { + regulator-name = "vdd_arm"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1500000>; + regulator-always-on; + regulator-boot-on; + }; + + buck3_reg: BUCK3 { + regulator-name = "vdd_int"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1400000>; + regulator-always-on; + regulator-boot-on; + }; + + buck4_reg: BUCK4 { + regulator-name = "vdd_g3d"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1400000>; + regulator-always-on; + regulator-boot-on; + }; + + buck5_reg: BUCK5 { + regulator-name = "vdd_mem"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1400000>; + regulator-always-on; + regulator-boot-on; + }; + + buck6_reg: BUCK6 { + regulator-name = "vdd_kfc"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1500000>; + regulator-always-on; + regulator-boot-on; + }; + + buck7_reg: BUCK7 { + regulator-name = "vdd_1.0v_ldo"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1500000>; + regulator-always-on; + regulator-boot-on; + }; + + buck8_reg: BUCK8 { + regulator-name = "vdd_1.8v_ldo"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1500000>; + regulator-always-on; + regulator-boot-on; + }; + + buck9_reg: BUCK9 { + regulator-name = "vdd_2.8v_ldo"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3750000>; + regulator-always-on; + regulator-boot-on; + }; + + buck10_reg: BUCK10 { + regulator-name = "vdd_vmem"; + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2850000>; + regulator-always-on; + regulator-boot-on; }; }; }; }; + +&i2c_2 { + samsung,i2c-sda-delay = <100>; + samsung,i2c-max-bus-freq = <66000>; + status = "okay"; + + hdmiddc@50 { + compatible = "samsung,exynos4210-hdmiddc"; + reg = <0x50>; + }; +}; + +&mfc { + samsung,mfc-r = <0x43000000 0x800000>; + samsung,mfc-l = <0x51000000 0x800000>; +}; + +&mmc_0 { + status = "okay"; + broken-cd; + card-detect-delay = <200>; + samsung,dw-mshc-ciu-div = <3>; + samsung,dw-mshc-sdr-timing = <0 4>; + samsung,dw-mshc-ddr-timing = <0 2>; + samsung,dw-mshc-hs400-timing = <0 2>; + samsung,read-strobe-delay = <90>; + pinctrl-names = "default"; + pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus1 &sd0_bus4 &sd0_bus8 + &sd0_rclk>; + bus-width = <8>; + cap-mmc-highspeed; +}; + +&mmc_2 { + status = "okay"; + card-detect-delay = <200>; + samsung,dw-mshc-ciu-div = <3>; + samsung,dw-mshc-sdr-timing = <2 3>; + samsung,dw-mshc-ddr-timing = <1 2>; + pinctrl-names = "default"; + pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus1 &sd2_bus4>; + bus-width = <4>; + cap-sd-highspeed; +}; + +&pinctrl_0 { + hdmi_hpd_irq: hdmi-hpd-irq { + samsung,pins = "gpx3-7"; + samsung,pin-function = <0>; + samsung,pin-pud = <1>; + samsung,pin-drv = <0>; + }; +}; + +&pinctrl_2 { + usb300_vbus_en: usb300-vbus-en { + samsung,pins = "gpg0-5"; + samsung,pin-function = <1>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + usb301_vbus_en: usb301-vbus-en { + samsung,pins = "gpg1-4"; + samsung,pin-function = <1>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; +}; + +&rtc { + status = "okay"; +}; + +&usbdrd_phy0 { + vbus-supply = <&usb300_vbus_reg>; +}; + +&usbdrd_phy1 { + vbus-supply = <&usb301_vbus_reg>; +}; diff --git a/arch/arm/boot/dts/exynos5420.dtsi b/arch/arm/boot/dts/exynos5420.dtsi index 45317538b..534f27ceb 100644 --- a/arch/arm/boot/dts/exynos5420.dtsi +++ b/arch/arm/boot/dts/exynos5420.dtsi @@ -179,6 +179,8 @@ clocks = <&clock CLK_MFC>; clock-names = "mfc"; power-domains = <&mfc_pd>; + iommus = <&sysmmu_mfc_l>, <&sysmmu_mfc_r>; + iommu-names = "left", "right"; }; mmc_0: mmc@12200000 { @@ -264,9 +266,8 @@ mfc_pd: power-domain@10044060 { compatible = "samsung,exynos4210-pd"; reg = <0x10044060 0x20>; - clocks = <&clock CLK_FIN_PLL>, <&clock CLK_MOUT_SW_ACLK333>, - <&clock CLK_MOUT_USER_ACLK333>; - clock-names = "oscclk", "pclk0", "clk0"; + clocks = <&clock CLK_FIN_PLL>, <&clock CLK_MOUT_USER_ACLK333>; + clock-names = "oscclk", "clk0"; #power-domain-cells = <0>; }; @@ -280,16 +281,12 @@ compatible = "samsung,exynos4210-pd"; reg = <0x100440C0 0x20>; #power-domain-cells = <0>; - clocks = <&clock CLK_FIN_PLL>, <&clock CLK_MOUT_SW_ACLK200>, + clocks = <&clock CLK_FIN_PLL>, <&clock CLK_MOUT_USER_ACLK200_DISP1>, - <&clock CLK_MOUT_SW_ACLK300>, <&clock CLK_MOUT_USER_ACLK300_DISP1>, - <&clock CLK_MOUT_SW_ACLK400>, <&clock CLK_MOUT_USER_ACLK400_DISP1>, <&clock CLK_FIMD1>, <&clock CLK_MIXER>; - clock-names = "oscclk", "pclk0", "clk0", - "pclk1", "clk1", "pclk2", "clk2", - "asb0", "asb1"; + clock-names = "oscclk", "clk0", "clk1", "clk2", "asb0", "asb1"; }; pinctrl_0: pinctrl@13400000 { @@ -328,13 +325,6 @@ interrupts = <0 47 0>; }; - rtc: rtc@101E0000 { - clocks = <&clock CLK_RTC>; - clock-names = "rtc"; - interrupt-parent = <&pmu_system_controller>; - status = "disabled"; - }; - amba { #address-cells = <1>; #size-cells = <1>; @@ -416,6 +406,9 @@ <&clock_audss EXYNOS_I2S_BUS>, <&clock_audss EXYNOS_SCLK_I2S>; clock-names = "iis", "i2s_opclk0", "i2s_opclk1"; + #clock-cells = <1>; + clock-output-names = "i2s_cdclk0"; + #sound-dai-cells = <1>; samsung,idma-addr = <0x03000000>; pinctrl-names = "default"; pinctrl-0 = <&i2s0_bus>; @@ -430,6 +423,9 @@ dma-names = "tx", "rx"; clocks = <&clock CLK_I2S1>, <&clock CLK_SCLK_I2S1>; clock-names = "iis", "i2s_opclk0"; + #clock-cells = <1>; + clock-output-names = "i2s_cdclk1"; + #sound-dai-cells = <1>; pinctrl-names = "default"; pinctrl-0 = <&i2s1_bus>; status = "disabled"; @@ -443,6 +439,9 @@ dma-names = "tx", "rx"; clocks = <&clock CLK_I2S2>, <&clock CLK_SCLK_I2S2>; clock-names = "iis", "i2s_opclk0"; + #clock-cells = <1>; + clock-output-names = "i2s_cdclk2"; + #sound-dai-cells = <1>; pinctrl-names = "default"; pinctrl-0 = <&i2s2_bus>; status = "disabled"; @@ -496,26 +495,6 @@ status = "disabled"; }; - uart_0: serial@12C00000 { - clocks = <&clock CLK_UART0>, <&clock CLK_SCLK_UART0>; - clock-names = "uart", "clk_uart_baud0"; - }; - - uart_1: serial@12C10000 { - clocks = <&clock CLK_UART1>, <&clock CLK_SCLK_UART1>; - clock-names = "uart", "clk_uart_baud0"; - }; - - uart_2: serial@12C20000 { - clocks = <&clock CLK_UART2>, <&clock CLK_SCLK_UART2>; - clock-names = "uart", "clk_uart_baud0"; - }; - - uart_3: serial@12C30000 { - clocks = <&clock CLK_UART3>, <&clock CLK_SCLK_UART3>; - clock-names = "uart", "clk_uart_baud0"; - }; - pwm: pwm@12dd0000 { compatible = "samsung,exynos4210-pwm"; reg = <0x12dd0000 0x100>; @@ -531,17 +510,9 @@ #phy-cells = <0>; }; - dp: dp-controller@145B0000 { - clocks = <&clock CLK_DP1>; - clock-names = "dp"; - phys = <&dp_phy>; - phy-names = "dp"; - power-domains = <&disp_pd>; - }; - mipi_phy: video-phy@10040714 { compatible = "samsung,s5pv210-mipi-video-phy"; - reg = <0x10040714 12>; + syscon = <&pmu_system_controller>; #phy-cells = <1>; }; @@ -558,12 +529,6 @@ status = "disabled"; }; - fimd: fimd@14400000 { - clocks = <&clock CLK_SCLK_FIMD1>, <&clock CLK_FIMD1>; - clock-names = "sclk_fimd", "fimd"; - power-domains = <&disp_pd>; - }; - adc: adc@12D10000 { compatible = "samsung,exynos-adc-v2"; reg = <0x12D10000 0x100>; @@ -750,6 +715,7 @@ <&clock CLK_SCLK_HDMI>; clock-names = "mixer", "hdmi", "sclk_hdmi"; power-domains = <&disp_pd>; + iommus = <&sysmmu_tv>; }; gsc_0: video-scaler@13e00000 { @@ -759,6 +725,7 @@ clocks = <&clock CLK_GSCL0>; clock-names = "gscl"; power-domains = <&gsc_pd>; + iommus = <&sysmmu_gscl0>; }; gsc_1: video-scaler@13e10000 { @@ -768,6 +735,25 @@ clocks = <&clock CLK_GSCL1>; clock-names = "gscl"; power-domains = <&gsc_pd>; + iommus = <&sysmmu_gscl1>; + }; + + jpeg_0: jpeg@11F50000 { + compatible = "samsung,exynos5420-jpeg"; + reg = <0x11F50000 0x1000>; + interrupts = <0 89 0>; + clock-names = "jpeg"; + clocks = <&clock CLK_JPEG>; + iommus = <&sysmmu_jpeg0>; + }; + + jpeg_1: jpeg@11F60000 { + compatible = "samsung,exynos5420-jpeg"; + reg = <0x11F60000 0x1000>; + interrupts = <0 168 0>; + clock-names = "jpeg"; + clocks = <&clock CLK_JPEG2>; + iommus = <&sysmmu_jpeg1>; }; pmu_system_controller: system-controller@10040000 { @@ -962,4 +948,221 @@ samsung,sysreg-phandle = <&sysreg_system_controller>; samsung,pmureg-phandle = <&pmu_system_controller>; }; + + sysmmu_g2dr: sysmmu@0x10A60000 { + compatible = "samsung,exynos-sysmmu"; + reg = <0x10A60000 0x1000>; + interrupt-parent = <&combiner>; + interrupts = <24 5>; + clock-names = "sysmmu", "master"; + clocks = <&clock CLK_SMMU_G2D>, <&clock CLK_G2D>; + #iommu-cells = <0>; + }; + + sysmmu_g2dw: sysmmu@0x10A70000 { + compatible = "samsung,exynos-sysmmu"; + reg = <0x10A70000 0x1000>; + interrupt-parent = <&combiner>; + interrupts = <22 2>; + clock-names = "sysmmu", "master"; + clocks = <&clock CLK_SMMU_G2D>, <&clock CLK_G2D>; + #iommu-cells = <0>; + }; + + sysmmu_tv: sysmmu@0x14650000 { + compatible = "samsung,exynos-sysmmu"; + reg = <0x14650000 0x1000>; + interrupt-parent = <&combiner>; + interrupts = <7 4>; + clock-names = "sysmmu", "master"; + clocks = <&clock CLK_SMMU_MIXER>, <&clock CLK_MIXER>; + power-domains = <&disp_pd>; + #iommu-cells = <0>; + }; + + sysmmu_gscl0: sysmmu@0x13E80000 { + compatible = "samsung,exynos-sysmmu"; + reg = <0x13E80000 0x1000>; + interrupt-parent = <&combiner>; + interrupts = <2 0>; + clock-names = "sysmmu", "master"; + clocks = <&clock CLK_SMMU_GSCL0>, <&clock CLK_GSCL0>; + power-domains = <&gsc_pd>; + #iommu-cells = <0>; + }; + + sysmmu_gscl1: sysmmu@0x13E90000 { + compatible = "samsung,exynos-sysmmu"; + reg = <0x13E90000 0x1000>; + interrupt-parent = <&combiner>; + interrupts = <2 2>; + clock-names = "sysmmu", "master"; + clocks = <&clock CLK_SMMU_GSCL1>, <&clock CLK_GSCL1>; + power-domains = <&gsc_pd>; + #iommu-cells = <0>; + }; + + sysmmu_scaler0r: sysmmu@0x12880000 { + compatible = "samsung,exynos-sysmmu"; + reg = <0x12880000 0x1000>; + interrupt-parent = <&combiner>; + interrupts = <22 4>; + clock-names = "sysmmu", "master"; + clocks = <&clock CLK_SMMU_MSCL0>, <&clock CLK_MSCL0>; + #iommu-cells = <0>; + }; + + sysmmu_scaler1r: sysmmu@0x12890000 { + compatible = "samsung,exynos-sysmmu"; + reg = <0x12890000 0x1000>; + interrupts = <0 186 0>; + clock-names = "sysmmu", "master"; + clocks = <&clock CLK_SMMU_MSCL1>, <&clock CLK_MSCL1>; + #iommu-cells = <0>; + }; + + sysmmu_scaler2r: sysmmu@0x128A0000 { + compatible = "samsung,exynos-sysmmu"; + reg = <0x128A0000 0x1000>; + interrupts = <0 188 0>; + clock-names = "sysmmu", "master"; + clocks = <&clock CLK_SMMU_MSCL2>, <&clock CLK_MSCL2>; + #iommu-cells = <0>; + }; + + sysmmu_scaler0w: sysmmu@0x128C0000 { + compatible = "samsung,exynos-sysmmu"; + reg = <0x128C0000 0x1000>; + interrupt-parent = <&combiner>; + interrupts = <27 2>; + clock-names = "sysmmu", "master"; + clocks = <&clock CLK_SMMU_MSCL0>, <&clock CLK_MSCL0>; + #iommu-cells = <0>; + }; + + sysmmu_scaler1w: sysmmu@0x128D0000 { + compatible = "samsung,exynos-sysmmu"; + reg = <0x128D0000 0x1000>; + interrupt-parent = <&combiner>; + interrupts = <22 6>; + clock-names = "sysmmu", "master"; + clocks = <&clock CLK_SMMU_MSCL1>, <&clock CLK_MSCL1>; + #iommu-cells = <0>; + }; + + sysmmu_scaler2w: sysmmu@0x128E0000 { + compatible = "samsung,exynos-sysmmu"; + reg = <0x128E0000 0x1000>; + interrupt-parent = <&combiner>; + interrupts = <19 6>; + clock-names = "sysmmu", "master"; + clocks = <&clock CLK_SMMU_MSCL2>, <&clock CLK_MSCL2>; + #iommu-cells = <0>; + }; + + sysmmu_jpeg0: sysmmu@0x11F10000 { + compatible = "samsung,exynos-sysmmu"; + reg = <0x11F10000 0x1000>; + interrupt-parent = <&combiner>; + interrupts = <4 2>; + clock-names = "sysmmu", "master"; + clocks = <&clock CLK_SMMU_JPEG>, <&clock CLK_JPEG>; + #iommu-cells = <0>; + }; + + sysmmu_jpeg1: sysmmu@0x11F20000 { + compatible = "samsung,exynos-sysmmu"; + reg = <0x11F20000 0x1000>; + interrupts = <0 169 0>; + clock-names = "sysmmu", "master"; + clocks = <&clock CLK_SMMU_JPEG2>, <&clock CLK_JPEG2>; + #iommu-cells = <0>; + }; + + sysmmu_mfc_l: sysmmu@0x11200000 { + compatible = "samsung,exynos-sysmmu"; + reg = <0x11200000 0x1000>; + interrupt-parent = <&combiner>; + interrupts = <6 2>; + clock-names = "sysmmu", "master"; + clocks = <&clock CLK_SMMU_MFCL>, <&clock CLK_MFC>; + power-domains = <&mfc_pd>; + #iommu-cells = <0>; + }; + + sysmmu_mfc_r: sysmmu@0x11210000 { + compatible = "samsung,exynos-sysmmu"; + reg = <0x11210000 0x1000>; + interrupt-parent = <&combiner>; + interrupts = <8 5>; + clock-names = "sysmmu", "master"; + clocks = <&clock CLK_SMMU_MFCR>, <&clock CLK_MFC>; + power-domains = <&mfc_pd>; + #iommu-cells = <0>; + }; + + sysmmu_fimd1_0: sysmmu@0x14640000 { + compatible = "samsung,exynos-sysmmu"; + reg = <0x14640000 0x1000>; + interrupt-parent = <&combiner>; + interrupts = <3 2>; + clock-names = "sysmmu", "master"; + clocks = <&clock CLK_SMMU_FIMD1M0>, <&clock CLK_FIMD1>; + power-domains = <&disp_pd>; + #iommu-cells = <0>; + }; + + sysmmu_fimd1_1: sysmmu@0x14680000 { + compatible = "samsung,exynos-sysmmu"; + reg = <0x14680000 0x1000>; + interrupt-parent = <&combiner>; + interrupts = <3 0>; + clock-names = "sysmmu", "master"; + clocks = <&clock CLK_SMMU_FIMD1M0>, <&clock CLK_FIMD1>; + power-domains = <&disp_pd>; + #iommu-cells = <0>; + }; +}; + +&dp { + clocks = <&clock CLK_DP1>; + clock-names = "dp"; + phys = <&dp_phy>; + phy-names = "dp"; + power-domains = <&disp_pd>; +}; + +&fimd { + clocks = <&clock CLK_SCLK_FIMD1>, <&clock CLK_FIMD1>; + clock-names = "sclk_fimd", "fimd"; + power-domains = <&disp_pd>; + iommus = <&sysmmu_fimd1_0>, <&sysmmu_fimd1_1>; + iommu-names = "m0", "m1"; +}; + +&rtc { + clocks = <&clock CLK_RTC>; + clock-names = "rtc"; + interrupt-parent = <&pmu_system_controller>; + status = "disabled"; +}; + +&serial_0 { + clocks = <&clock CLK_UART0>, <&clock CLK_SCLK_UART0>; + clock-names = "uart", "clk_uart_baud0"; +}; + +&serial_1 { + clocks = <&clock CLK_UART1>, <&clock CLK_SCLK_UART1>; + clock-names = "uart", "clk_uart_baud0"; +}; + +&serial_2 { + clocks = <&clock CLK_UART2>, <&clock CLK_SCLK_UART2>; + clock-names = "uart", "clk_uart_baud0"; +}; + +&serial_3 { + clocks = <&clock CLK_UART3>, <&clock CLK_SCLK_UART3>; + clock-names = "uart", "clk_uart_baud0"; }; diff --git a/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi b/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi new file mode 100644 index 000000000..8adf45574 --- /dev/null +++ b/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi @@ -0,0 +1,479 @@ +/* + * Hardkernel Odroid XU3 board device tree source + * + * Copyright (c) 2014 Collabora Ltd. + * Copyright (c) 2013 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include <dt-bindings/clock/samsung,s2mps11.h> +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/sound/samsung-i2s.h> +#include "exynos5800.dtsi" + +/ { + memory { + reg = <0x40000000 0x7EA00000>; + }; + + chosen { + linux,stdout-path = &serial_2; + }; + + firmware@02073000 { + compatible = "samsung,secure-firmware"; + reg = <0x02073000 0x1000>; + }; + + fixed-rate-clocks { + oscclk { + compatible = "samsung,exynos5420-oscclk"; + clock-frequency = <24000000>; + }; + }; + + emmc_pwrseq: pwrseq { + pinctrl-0 = <&emmc_nrst_pin>; + pinctrl-names = "default"; + compatible = "mmc-pwrseq-emmc"; + reset-gpios = <&gpd1 0 1>; + }; + + pwmleds { + compatible = "pwm-leds"; + + greenled { + label = "green:mmc0"; + pwms = <&pwm 1 2000000 0>; + pwm-names = "pwm1"; + /* + * Green LED is much brighter than the others + * so limit its max brightness + */ + max_brightness = <127>; + linux,default-trigger = "mmc0"; + }; + + blueled { + label = "blue:heartbeat"; + pwms = <&pwm 2 2000000 0>; + pwm-names = "pwm2"; + max_brightness = <255>; + linux,default-trigger = "heartbeat"; + }; + }; + + gpioleds { + compatible = "gpio-leds"; + redled { + label = "red:microSD"; + gpios = <&gpx2 3 GPIO_ACTIVE_HIGH>; + default-state = "off"; + linux,default-trigger = "mmc1"; + }; + }; + + sound: sound { + compatible = "simple-audio-card"; + + simple-audio-card,name = "Odroid-XU3"; + simple-audio-card,widgets = + "Headphone", "Headphone Jack", + "Speakers", "Speakers"; + simple-audio-card,routing = + "Headphone Jack", "HPL", + "Headphone Jack", "HPR", + "Headphone Jack", "MICBIAS", + "IN1", "Headphone Jack", + "Speakers", "SPKL", + "Speakers", "SPKR"; + + simple-audio-card,format = "i2s"; + simple-audio-card,bitclock-master = <&link0_codec>; + simple-audio-card,frame-master = <&link0_codec>; + + simple-audio-card,cpu { + sound-dai = <&i2s0 0>; + system-clock-frequency = <19200000>; + }; + + link0_codec: simple-audio-card,codec { + sound-dai = <&max98090>; + clocks = <&i2s0 CLK_I2S_CDCLK>; + }; + }; +}; + +&clock_audss { + assigned-clocks = <&clock_audss EXYNOS_MOUT_AUDSS>, + <&clock_audss EXYNOS_MOUT_I2S>, + <&clock_audss EXYNOS_DOUT_AUD_BUS>; + assigned-clock-parents = <&clock CLK_FIN_PLL>, + <&clock_audss EXYNOS_MOUT_AUDSS>; + assigned-clock-rates = <0>, + <0>, + <19200000>; +}; + +&fimd { + status = "okay"; +}; + + +&hdmi { + status = "okay"; + hpd-gpio = <&gpx3 7 0>; + pinctrl-names = "default"; + pinctrl-0 = <&hdmi_hpd_irq>; + + vdd_osc-supply = <&ldo7_reg>; + vdd_pll-supply = <&ldo6_reg>; + vdd-supply = <&ldo6_reg>; +}; + +&hsi2c_4 { + status = "okay"; + + s2mps11_pmic@66 { + compatible = "samsung,s2mps11-pmic"; + reg = <0x66>; + s2mps11,buck2-ramp-delay = <12>; + s2mps11,buck34-ramp-delay = <12>; + s2mps11,buck16-ramp-delay = <12>; + s2mps11,buck6-ramp-enable = <1>; + s2mps11,buck2-ramp-enable = <1>; + s2mps11,buck3-ramp-enable = <1>; + s2mps11,buck4-ramp-enable = <1>; + + interrupt-parent = <&gpx0>; + interrupts = <4 IRQ_TYPE_EDGE_FALLING>; + pinctrl-names = "default"; + pinctrl-0 = <&s2mps11_irq>; + + s2mps11_osc: clocks { + #clock-cells = <1>; + clock-output-names = "s2mps11_ap", + "s2mps11_cp", "s2mps11_bt"; + }; + + regulators { + ldo1_reg: LDO1 { + regulator-name = "vdd_ldo1"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-always-on; + }; + + ldo3_reg: LDO3 { + regulator-name = "vdd_ldo3"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + ldo5_reg: LDO5 { + regulator-name = "vdd_ldo5"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + ldo6_reg: LDO6 { + regulator-name = "vdd_ldo6"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-always-on; + }; + + ldo7_reg: LDO7 { + regulator-name = "vdd_ldo7"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + ldo8_reg: LDO8 { + regulator-name = "vdd_ldo8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + ldo9_reg: LDO9 { + regulator-name = "vdd_ldo9"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-always-on; + }; + + ldo10_reg: LDO10 { + regulator-name = "vdd_ldo10"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + ldo11_reg: LDO11 { + regulator-name = "vdd_ldo11"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-always-on; + }; + + ldo12_reg: LDO12 { + regulator-name = "vdd_ldo12"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + ldo13_reg: LDO13 { + regulator-name = "vdd_ldo13"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-always-on; + }; + + ldo15_reg: LDO15 { + regulator-name = "vdd_ldo15"; + regulator-min-microvolt = <3100000>; + regulator-max-microvolt = <3100000>; + regulator-always-on; + }; + + ldo16_reg: LDO16 { + regulator-name = "vdd_ldo16"; + regulator-min-microvolt = <2200000>; + regulator-max-microvolt = <2200000>; + regulator-always-on; + }; + + ldo17_reg: LDO17 { + regulator-name = "tsp_avdd"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + ldo19_reg: LDO19 { + regulator-name = "vdd_sd"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-always-on; + }; + + ldo24_reg: LDO24 { + regulator-name = "tsp_io"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-always-on; + }; + + ldo26_reg: LDO26 { + regulator-name = "vdd_ldo26"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-always-on; + }; + + buck1_reg: BUCK1 { + regulator-name = "vdd_mif"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1300000>; + regulator-always-on; + regulator-boot-on; + }; + + buck2_reg: BUCK2 { + regulator-name = "vdd_arm"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1500000>; + regulator-always-on; + regulator-boot-on; + }; + + buck3_reg: BUCK3 { + regulator-name = "vdd_int"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1400000>; + regulator-always-on; + regulator-boot-on; + }; + + buck4_reg: BUCK4 { + regulator-name = "vdd_g3d"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1400000>; + regulator-always-on; + regulator-boot-on; + }; + + buck5_reg: BUCK5 { + regulator-name = "vdd_mem"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1400000>; + regulator-always-on; + regulator-boot-on; + }; + + buck6_reg: BUCK6 { + regulator-name = "vdd_kfc"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1500000>; + regulator-always-on; + regulator-boot-on; + }; + + buck7_reg: BUCK7 { + regulator-name = "vdd_1.0v_ldo"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1500000>; + regulator-always-on; + regulator-boot-on; + }; + + buck8_reg: BUCK8 { + regulator-name = "vdd_1.8v_ldo"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1500000>; + regulator-always-on; + regulator-boot-on; + }; + + buck9_reg: BUCK9 { + regulator-name = "vdd_2.8v_ldo"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3750000>; + regulator-always-on; + regulator-boot-on; + }; + + buck10_reg: BUCK10 { + regulator-name = "vdd_vmem"; + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2850000>; + regulator-always-on; + regulator-boot-on; + }; + }; + }; +}; + +&hsi2c_5 { + status = "okay"; + max98090: max98090@10 { + compatible = "maxim,max98090"; + reg = <0x10>; + interrupt-parent = <&gpx3>; + interrupts = <2 0>; + clocks = <&i2s0 CLK_I2S_CDCLK>; + clock-names = "mclk"; + #sound-dai-cells = <0>; + }; +}; + +&i2c_2 { + samsung,i2c-sda-delay = <100>; + samsung,i2c-max-bus-freq = <66000>; + status = "okay"; + + hdmiddc@50 { + compatible = "samsung,exynos4210-hdmiddc"; + reg = <0x50>; + }; +}; + +&i2s0 { + status = "okay"; +}; + +&mfc { + samsung,mfc-r = <0x43000000 0x800000>; + samsung,mfc-l = <0x51000000 0x800000>; +}; + +&mmc_0 { + status = "okay"; + mmc-pwrseq = <&emmc_pwrseq>; + cd-gpios = <&gpc0 2 GPIO_ACTIVE_LOW>; + card-detect-delay = <200>; + samsung,dw-mshc-ciu-div = <3>; + samsung,dw-mshc-sdr-timing = <0 4>; + samsung,dw-mshc-ddr-timing = <0 2>; + samsung,dw-mshc-hs400-timing = <0 2>; + samsung,read-strobe-delay = <90>; + pinctrl-names = "default"; + pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus1 &sd0_bus4 &sd0_bus8 &sd0_cd &sd0_rclk>; + bus-width = <8>; + cap-mmc-highspeed; + mmc-hs200-1_8v; + mmc-hs400-1_8v; +}; + +&mmc_2 { + status = "okay"; + card-detect-delay = <200>; + samsung,dw-mshc-ciu-div = <3>; + samsung,dw-mshc-sdr-timing = <0 4>; + samsung,dw-mshc-ddr-timing = <0 2>; + pinctrl-names = "default"; + pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus1 &sd2_bus4>; + bus-width = <4>; + cap-sd-highspeed; +}; + +&pinctrl_0 { + hdmi_hpd_irq: hdmi-hpd-irq { + samsung,pins = "gpx3-7"; + samsung,pin-function = <0>; + samsung,pin-pud = <1>; + samsung,pin-drv = <0>; + }; + + s2mps11_irq: s2mps11-irq { + samsung,pins = "gpx0-4"; + samsung,pin-function = <0xf>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; +}; + +&pinctrl_1 { + emmc_nrst_pin: emmc-nrst { + samsung,pins = "gpd1-0"; + samsung,pin-function = <0>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; +}; + +&pwm { + /* + * PWM 0 -- fan + * PWM 1 -- Green LED + * PWM 2 -- Blue LED + * PWM 3 -- on MIPI connector for backlight + */ + pinctrl-0 = <&pwm0_out &pwm1_out &pwm2_out &pwm3_out>; + pinctrl-names = "default"; + status = "okay"; +}; + +&rtc { + status = "okay"; + clocks = <&clock CLK_RTC>, <&s2mps11_osc S2MPS11_CLK_AP>; + clock-names = "rtc", "rtc_src"; +}; + +&usbdrd_dwc3_0 { + dr_mode = "host"; +}; + +&usbdrd_dwc3_1 { + dr_mode = "otg"; +}; diff --git a/arch/arm/boot/dts/exynos5422-odroidxu3-lite.dts b/arch/arm/boot/dts/exynos5422-odroidxu3-lite.dts new file mode 100644 index 000000000..c06882bbb --- /dev/null +++ b/arch/arm/boot/dts/exynos5422-odroidxu3-lite.dts @@ -0,0 +1,20 @@ +/* + * Hardkernel Odroid XU3-Lite board device tree source + * + * Copyright (c) 2015 Krzysztof Kozlowski + * Copyright (c) 2014 Collabora Ltd. + * Copyright (c) 2013 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +/dts-v1/; +#include "exynos5422-odroidxu3-common.dtsi" + +/ { + model = "Hardkernel Odroid XU3 Lite"; + compatible = "hardkernel,odroid-xu3-lite", "samsung,exynos5800", "samsung,exynos5"; +}; diff --git a/arch/arm/boot/dts/exynos5422-odroidxu3.dts b/arch/arm/boot/dts/exynos5422-odroidxu3.dts index edc25cf1d..78e6a502f 100644 --- a/arch/arm/boot/dts/exynos5422-odroidxu3.dts +++ b/arch/arm/boot/dts/exynos5422-odroidxu3.dts @@ -11,348 +11,11 @@ */ /dts-v1/; -#include "exynos5800.dtsi" +#include "exynos5422-odroidxu3-common.dtsi" / { model = "Hardkernel Odroid XU3"; compatible = "hardkernel,odroid-xu3", "samsung,exynos5800", "samsung,exynos5"; - - memory { - reg = <0x40000000 0x7EA00000>; - }; - - chosen { - linux,stdout-path = &serial_2; - }; - - fimd@14400000 { - status = "okay"; - }; - - firmware@02073000 { - compatible = "samsung,secure-firmware"; - reg = <0x02073000 0x1000>; - }; - - fixed-rate-clocks { - oscclk { - compatible = "samsung,exynos5420-oscclk"; - clock-frequency = <24000000>; - }; - }; - - hsi2c_4: i2c@12CA0000 { - status = "okay"; - - s2mps11_pmic@66 { - compatible = "samsung,s2mps11-pmic"; - reg = <0x66>; - s2mps11,buck2-ramp-delay = <12>; - s2mps11,buck34-ramp-delay = <12>; - s2mps11,buck16-ramp-delay = <12>; - s2mps11,buck6-ramp-enable = <1>; - s2mps11,buck2-ramp-enable = <1>; - s2mps11,buck3-ramp-enable = <1>; - s2mps11,buck4-ramp-enable = <1>; - - s2mps11_osc: clocks { - #clock-cells = <1>; - clock-output-names = "s2mps11_ap", - "s2mps11_cp", "s2mps11_bt"; - }; - - regulators { - ldo1_reg: LDO1 { - regulator-name = "vdd_ldo1"; - regulator-min-microvolt = <1000000>; - regulator-max-microvolt = <1000000>; - regulator-always-on; - }; - - ldo3_reg: LDO3 { - regulator-name = "vdd_ldo3"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-always-on; - }; - - ldo5_reg: LDO5 { - regulator-name = "vdd_ldo5"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-always-on; - }; - - ldo6_reg: LDO6 { - regulator-name = "vdd_ldo6"; - regulator-min-microvolt = <1000000>; - regulator-max-microvolt = <1000000>; - regulator-always-on; - }; - - ldo7_reg: LDO7 { - regulator-name = "vdd_ldo7"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-always-on; - }; - - ldo8_reg: LDO8 { - regulator-name = "vdd_ldo8"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-always-on; - }; - - ldo9_reg: LDO9 { - regulator-name = "vdd_ldo9"; - regulator-min-microvolt = <3000000>; - regulator-max-microvolt = <3000000>; - regulator-always-on; - }; - - ldo10_reg: LDO10 { - regulator-name = "vdd_ldo10"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-always-on; - }; - - ldo11_reg: LDO11 { - regulator-name = "vdd_ldo11"; - regulator-min-microvolt = <1000000>; - regulator-max-microvolt = <1000000>; - regulator-always-on; - }; - - ldo12_reg: LDO12 { - regulator-name = "vdd_ldo12"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-always-on; - }; - - ldo13_reg: LDO13 { - regulator-name = "vdd_ldo13"; - regulator-min-microvolt = <2800000>; - regulator-max-microvolt = <2800000>; - regulator-always-on; - }; - - ldo15_reg: LDO15 { - regulator-name = "vdd_ldo15"; - regulator-min-microvolt = <3100000>; - regulator-max-microvolt = <3100000>; - regulator-always-on; - }; - - ldo16_reg: LDO16 { - regulator-name = "vdd_ldo16"; - regulator-min-microvolt = <2200000>; - regulator-max-microvolt = <2200000>; - regulator-always-on; - }; - - ldo17_reg: LDO17 { - regulator-name = "tsp_avdd"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - }; - - ldo19_reg: LDO19 { - regulator-name = "vdd_sd"; - regulator-min-microvolt = <2800000>; - regulator-max-microvolt = <2800000>; - regulator-always-on; - }; - - ldo24_reg: LDO24 { - regulator-name = "tsp_io"; - regulator-min-microvolt = <2800000>; - regulator-max-microvolt = <2800000>; - regulator-always-on; - }; - - ldo26_reg: LDO26 { - regulator-name = "vdd_ldo26"; - regulator-min-microvolt = <3000000>; - regulator-max-microvolt = <3000000>; - regulator-always-on; - }; - - buck1_reg: BUCK1 { - regulator-name = "vdd_mif"; - regulator-min-microvolt = <800000>; - regulator-max-microvolt = <1300000>; - regulator-always-on; - regulator-boot-on; - }; - - buck2_reg: BUCK2 { - regulator-name = "vdd_arm"; - regulator-min-microvolt = <800000>; - regulator-max-microvolt = <1500000>; - regulator-always-on; - regulator-boot-on; - }; - - buck3_reg: BUCK3 { - regulator-name = "vdd_int"; - regulator-min-microvolt = <800000>; - regulator-max-microvolt = <1400000>; - regulator-always-on; - regulator-boot-on; - }; - - buck4_reg: BUCK4 { - regulator-name = "vdd_g3d"; - regulator-min-microvolt = <800000>; - regulator-max-microvolt = <1400000>; - regulator-always-on; - regulator-boot-on; - }; - - buck5_reg: BUCK5 { - regulator-name = "vdd_mem"; - regulator-min-microvolt = <800000>; - regulator-max-microvolt = <1400000>; - regulator-always-on; - regulator-boot-on; - }; - - buck6_reg: BUCK6 { - regulator-name = "vdd_kfc"; - regulator-min-microvolt = <800000>; - regulator-max-microvolt = <1500000>; - regulator-always-on; - regulator-boot-on; - }; - - buck7_reg: BUCK7 { - regulator-name = "vdd_1.0v_ldo"; - regulator-min-microvolt = <800000>; - regulator-max-microvolt = <1500000>; - regulator-always-on; - regulator-boot-on; - }; - - buck8_reg: BUCK8 { - regulator-name = "vdd_1.8v_ldo"; - regulator-min-microvolt = <800000>; - regulator-max-microvolt = <1500000>; - regulator-always-on; - regulator-boot-on; - }; - - buck9_reg: BUCK9 { - regulator-name = "vdd_2.8v_ldo"; - regulator-min-microvolt = <3000000>; - regulator-max-microvolt = <3750000>; - regulator-always-on; - regulator-boot-on; - }; - - buck10_reg: BUCK10 { - regulator-name = "vdd_vmem"; - regulator-min-microvolt = <2850000>; - regulator-max-microvolt = <2850000>; - regulator-always-on; - regulator-boot-on; - }; - }; - }; - }; - - emmc_pwrseq: pwrseq { - pinctrl-0 = <&emmc_nrst_pin>; - pinctrl-names = "default"; - compatible = "mmc-pwrseq-emmc"; - reset-gpios = <&gpd1 0 1>; - }; - - i2c_2: i2c@12C80000 { - samsung,i2c-sda-delay = <100>; - samsung,i2c-max-bus-freq = <66000>; - status = "okay"; - - hdmiddc@50 { - compatible = "samsung,exynos4210-hdmiddc"; - reg = <0x50>; - }; - }; - - rtc@101E0000 { - status = "okay"; - }; -}; - -&hdmi { - status = "okay"; - hpd-gpio = <&gpx3 7 0>; - pinctrl-names = "default"; - pinctrl-0 = <&hdmi_hpd_irq>; - - vdd_osc-supply = <&ldo7_reg>; - vdd_pll-supply = <&ldo6_reg>; - vdd-supply = <&ldo6_reg>; -}; - -&mfc { - samsung,mfc-r = <0x43000000 0x800000>; - samsung,mfc-l = <0x51000000 0x800000>; -}; - -&mmc_0 { - status = "okay"; - mmc-pwrseq = <&emmc_pwrseq>; - broken-cd; - card-detect-delay = <200>; - samsung,dw-mshc-ciu-div = <3>; - samsung,dw-mshc-sdr-timing = <0 4>; - samsung,dw-mshc-ddr-timing = <0 2>; - pinctrl-names = "default"; - pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus1 &sd0_bus4 &sd0_bus8>; - bus-width = <8>; - cap-mmc-highspeed; -}; - -&mmc_2 { - status = "okay"; - card-detect-delay = <200>; - samsung,dw-mshc-ciu-div = <3>; - samsung,dw-mshc-sdr-timing = <0 4>; - samsung,dw-mshc-ddr-timing = <0 2>; - pinctrl-names = "default"; - pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus1 &sd2_bus4>; - bus-width = <4>; - cap-sd-highspeed; -}; - -&pinctrl_0 { - hdmi_hpd_irq: hdmi-hpd-irq { - samsung,pins = "gpx3-7"; - samsung,pin-function = <0>; - samsung,pin-pud = <1>; - samsung,pin-drv = <0>; - }; -}; - -&pinctrl_1 { - emmc_nrst_pin: emmc-nrst { - samsung,pins = "gpd1-0"; - samsung,pin-function = <0>; - samsung,pin-pud = <0>; - samsung,pin-drv = <0>; - }; -}; - -&usbdrd_dwc3_0 { - dr_mode = "host"; -}; - -&usbdrd_dwc3_1 { - dr_mode = "otg"; }; &i2c_0 { diff --git a/arch/arm/boot/dts/exynos5440-sd5v1.dts b/arch/arm/boot/dts/exynos5440-sd5v1.dts index 268609a42..a98501bab 100644 --- a/arch/arm/boot/dts/exynos5440-sd5v1.dts +++ b/arch/arm/boot/dts/exynos5440-sd5v1.dts @@ -27,13 +27,13 @@ }; }; - gmac: ethernet@00230000 { - fixed_phy; - phy_addr = <1>; - }; - spi { status = "disabled"; }; }; + +&gmac { + fixed_phy; + phy_addr = <1>; +}; diff --git a/arch/arm/boot/dts/exynos5440-ssdk5440.dts b/arch/arm/boot/dts/exynos5440-ssdk5440.dts index ff55dac6e..e4443f4e6 100644 --- a/arch/arm/boot/dts/exynos5440-ssdk5440.dts +++ b/arch/arm/boot/dts/exynos5440-ssdk5440.dts @@ -20,59 +20,58 @@ bootargs = "root=/dev/sda2 rw rootwait ignore_loglevel earlyprintk no_console_suspend mem=2048M@0x80000000 mem=6144M@0x100000000 console=ttySAC0,115200"; }; - spi_0: spi@D0000 { - - flash: w25q128@0 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "winbond,w25q128"; - spi-max-frequency = <15625000>; - reg = <0>; - controller-data { - samsung,spi-feedback-delay = <0>; - }; + fixed-rate-clocks { + xtal { + compatible = "samsung,clock-xtal"; + clock-frequency = <50000000>; + }; + }; +}; - partition@00000 { - label = "BootLoader"; - reg = <0x60000 0x80000>; - read-only; - }; +&pcie_0 { + reset-gpio = <&pin_ctrl 5 0>; + status = "okay"; +}; - partition@e0000 { - label = "Recovery-Kernel"; - reg = <0xe0000 0x300000>; - read-only; - }; +&pcie_1 { + reset-gpio = <&pin_ctrl 22 0>; + status = "okay"; +}; - partition@3e0000 { - label = "CRAM-FS"; - reg = <0x3e0000 0x700000>; - read-only; - }; +&spi_0 { + flash: w25q128@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "winbond,w25q128"; + spi-max-frequency = <15625000>; + reg = <0>; + controller-data { + samsung,spi-feedback-delay = <0>; + }; - partition@ae0000 { - label = "User-Data"; - reg = <0xae0000 0x520000>; - }; + partition@00000 { + label = "BootLoader"; + reg = <0x60000 0x80000>; + read-only; + }; + partition@e0000 { + label = "Recovery-Kernel"; + reg = <0xe0000 0x300000>; + read-only; }; - }; + partition@3e0000 { + label = "CRAM-FS"; + reg = <0x3e0000 0x700000>; + read-only; + }; - fixed-rate-clocks { - xtal { - compatible = "samsung,clock-xtal"; - clock-frequency = <50000000>; + partition@ae0000 { + label = "User-Data"; + reg = <0xae0000 0x520000>; }; - }; - pcie@290000 { - reset-gpio = <&pin_ctrl 5 0>; - status = "okay"; }; - pcie@2a0000 { - reset-gpio = <&pin_ctrl 22 0>; - status = "okay"; - }; }; diff --git a/arch/arm/boot/dts/exynos5440.dtsi b/arch/arm/boot/dts/exynos5440.dtsi index 59d9416b3..f18b51f2e 100644 --- a/arch/arm/boot/dts/exynos5440.dtsi +++ b/arch/arm/boot/dts/exynos5440.dtsi @@ -279,7 +279,7 @@ clock-names = "usbhost"; }; - pcie@290000 { + pcie_0: pcie@290000 { compatible = "samsung,exynos5440-pcie", "snps,dw-pcie"; reg = <0x290000 0x1000 0x270000 0x1000 @@ -300,7 +300,7 @@ status = "disabled"; }; - pcie@2a0000 { + pcie_1: pcie@2a0000 { compatible = "samsung,exynos5440-pcie", "snps,dw-pcie"; reg = <0x2a0000 0x1000 0x272000 0x1000 diff --git a/arch/arm/boot/dts/exynos5800-peach-pi.dts b/arch/arm/boot/dts/exynos5800-peach-pi.dts index 02eb8b153..7d5b386b5 100644 --- a/arch/arm/boot/dts/exynos5800-peach-pi.dts +++ b/arch/arm/boot/dts/exynos5800-peach-pi.dts @@ -990,7 +990,7 @@ }; }; -&uart_3 { +&serial_3 { status = "okay"; }; diff --git a/arch/arm/boot/dts/imx23-olinuxino.dts b/arch/arm/boot/dts/imx23-olinuxino.dts index 82045398b..a8b1c53eb 100644 --- a/arch/arm/boot/dts/imx23-olinuxino.dts +++ b/arch/arm/boot/dts/imx23-olinuxino.dts @@ -74,6 +74,12 @@ status = "okay"; }; + i2c: i2c@80058000 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c_pins_b>; + status = "okay"; + }; + duart: serial@80070000 { pinctrl-names = "default"; pinctrl-0 = <&duart_pins_a>; diff --git a/arch/arm/boot/dts/imx23.dtsi b/arch/arm/boot/dts/imx23.dtsi index 0cb8b0b11..b995333ea 100644 --- a/arch/arm/boot/dts/imx23.dtsi +++ b/arch/arm/boot/dts/imx23.dtsi @@ -308,6 +308,39 @@ fsl,voltage = <MXS_VOLTAGE_HIGH>; fsl,pull-up = <MXS_PULL_ENABLE>; }; + + i2c_pins_a: i2c@0 { + reg = <0>; + fsl,pinmux-ids = < + MX23_PAD_I2C_SCL__I2C_SCL + MX23_PAD_I2C_SDA__I2C_SDA + >; + fsl,drive-strength = <MXS_DRIVE_8mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_ENABLE>; + }; + + i2c_pins_b: i2c@1 { + reg = <1>; + fsl,pinmux-ids = < + MX23_PAD_LCD_ENABLE__I2C_SCL + MX23_PAD_LCD_HSYNC__I2C_SDA + >; + fsl,drive-strength = <MXS_DRIVE_8mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_ENABLE>; + }; + + i2c_pins_c: i2c@2 { + reg = <2>; + fsl,pinmux-ids = < + MX23_PAD_SSP1_DATA1__I2C_SCL + MX23_PAD_SSP1_DATA2__I2C_SDA + >; + fsl,drive-strength = <MXS_DRIVE_8mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_ENABLE>; + }; }; digctl@8001c000 { @@ -445,8 +478,13 @@ status = "disabled"; }; - i2c@80058000 { + i2c: i2c@80058000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,imx23-i2c"; reg = <0x80058000 0x2000>; + interrupts = <27>; + clock-frequency = <100000>; dmas = <&dma_apbx 3>; dma-names = "rx-tx"; status = "disabled"; diff --git a/arch/arm/boot/dts/imx25-pdk.dts b/arch/arm/boot/dts/imx25-pdk.dts index dd45e6971..935129635 100644 --- a/arch/arm/boot/dts/imx25-pdk.dts +++ b/arch/arm/boot/dts/imx25-pdk.dts @@ -10,6 +10,7 @@ */ /dts-v1/; +#include <dt-bindings/gpio/gpio.h> #include <dt-bindings/input/input.h> #include "imx25.dtsi" @@ -114,8 +115,8 @@ &esdhc1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_esdhc1>; - cd-gpios = <&gpio2 1 0>; - wp-gpios = <&gpio2 0 0>; + cd-gpios = <&gpio2 1 GPIO_ACTIVE_LOW>; + wp-gpios = <&gpio2 0 GPIO_ACTIVE_HIGH>; status = "okay"; }; diff --git a/arch/arm/boot/dts/imx27.dtsi b/arch/arm/boot/dts/imx27.dtsi index bc215e4b7..b69be5c49 100644 --- a/arch/arm/boot/dts/imx27.dtsi +++ b/arch/arm/boot/dts/imx27.dtsi @@ -108,7 +108,7 @@ }; gpt1: timer@10003000 { - compatible = "fsl,imx27-gpt", "fsl,imx1-gpt"; + compatible = "fsl,imx27-gpt", "fsl,imx21-gpt"; reg = <0x10003000 0x1000>; interrupts = <26>; clocks = <&clks IMX27_CLK_GPT1_IPG_GATE>, @@ -117,7 +117,7 @@ }; gpt2: timer@10004000 { - compatible = "fsl,imx27-gpt", "fsl,imx1-gpt"; + compatible = "fsl,imx27-gpt", "fsl,imx21-gpt"; reg = <0x10004000 0x1000>; interrupts = <25>; clocks = <&clks IMX27_CLK_GPT2_IPG_GATE>, @@ -126,7 +126,7 @@ }; gpt3: timer@10005000 { - compatible = "fsl,imx27-gpt", "fsl,imx1-gpt"; + compatible = "fsl,imx27-gpt", "fsl,imx21-gpt"; reg = <0x10005000 0x1000>; interrupts = <24>; clocks = <&clks IMX27_CLK_GPT3_IPG_GATE>, @@ -376,7 +376,7 @@ }; gpt4: timer@10019000 { - compatible = "fsl,imx27-gpt", "fsl,imx1-gpt"; + compatible = "fsl,imx27-gpt", "fsl,imx21-gpt"; reg = <0x10019000 0x1000>; interrupts = <4>; clocks = <&clks IMX27_CLK_GPT4_IPG_GATE>, @@ -385,7 +385,7 @@ }; gpt5: timer@1001a000 { - compatible = "fsl,imx27-gpt", "fsl,imx1-gpt"; + compatible = "fsl,imx27-gpt", "fsl,imx21-gpt"; reg = <0x1001a000 0x1000>; interrupts = <3>; clocks = <&clks IMX27_CLK_GPT5_IPG_GATE>, @@ -436,7 +436,7 @@ }; gpt6: timer@1001f000 { - compatible = "fsl,imx27-gpt", "fsl,imx1-gpt"; + compatible = "fsl,imx27-gpt", "fsl,imx21-gpt"; reg = <0x1001f000 0x1000>; interrupts = <2>; clocks = <&clks IMX27_CLK_GPT6_IPG_GATE>, diff --git a/arch/arm/boot/dts/imx28-cfa10036.dts b/arch/arm/boot/dts/imx28-cfa10036.dts index b04b6b885..570aa339a 100644 --- a/arch/arm/boot/dts/imx28-cfa10036.dts +++ b/arch/arm/boot/dts/imx28-cfa10036.dts @@ -99,6 +99,9 @@ solomon,height = <32>; solomon,width = <128>; solomon,page-offset = <0>; + solomon,com-lrremap; + solomon,com-invdir; + solomon,com-offset = <32>; }; }; diff --git a/arch/arm/boot/dts/imx51-apf51dev.dts b/arch/arm/boot/dts/imx51-apf51dev.dts index 93d3ea123..0f3fe29b8 100644 --- a/arch/arm/boot/dts/imx51-apf51dev.dts +++ b/arch/arm/boot/dts/imx51-apf51dev.dts @@ -98,7 +98,7 @@ &esdhc1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_esdhc1>; - cd-gpios = <&gpio2 29 GPIO_ACTIVE_HIGH>; + cd-gpios = <&gpio2 29 GPIO_ACTIVE_LOW>; bus-width = <4>; status = "okay"; }; diff --git a/arch/arm/boot/dts/imx53-ard.dts b/arch/arm/boot/dts/imx53-ard.dts index e9337ad52..3bc18835f 100644 --- a/arch/arm/boot/dts/imx53-ard.dts +++ b/arch/arm/boot/dts/imx53-ard.dts @@ -103,8 +103,8 @@ &esdhc1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_esdhc1>; - cd-gpios = <&gpio1 1 0>; - wp-gpios = <&gpio1 9 0>; + cd-gpios = <&gpio1 1 GPIO_ACTIVE_LOW>; + wp-gpios = <&gpio1 9 GPIO_ACTIVE_HIGH>; status = "okay"; }; diff --git a/arch/arm/boot/dts/imx53-m53evk.dts b/arch/arm/boot/dts/imx53-m53evk.dts index d0e0f57eb..53f40885c 100644 --- a/arch/arm/boot/dts/imx53-m53evk.dts +++ b/arch/arm/boot/dts/imx53-m53evk.dts @@ -124,8 +124,8 @@ &esdhc1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_esdhc1>; - cd-gpios = <&gpio1 1 0>; - wp-gpios = <&gpio1 9 0>; + cd-gpios = <&gpio1 1 GPIO_ACTIVE_LOW>; + wp-gpios = <&gpio1 9 GPIO_ACTIVE_HIGH>; status = "okay"; }; diff --git a/arch/arm/boot/dts/imx53-qsb-common.dtsi b/arch/arm/boot/dts/imx53-qsb-common.dtsi index 181ae5ebf..b0d5542ac 100644 --- a/arch/arm/boot/dts/imx53-qsb-common.dtsi +++ b/arch/arm/boot/dts/imx53-qsb-common.dtsi @@ -147,8 +147,8 @@ &esdhc3 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_esdhc3>; - cd-gpios = <&gpio3 11 0>; - wp-gpios = <&gpio3 12 0>; + cd-gpios = <&gpio3 11 GPIO_ACTIVE_LOW>; + wp-gpios = <&gpio3 12 GPIO_ACTIVE_HIGH>; bus-width = <8>; status = "okay"; }; @@ -295,9 +295,10 @@ &tve { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_vga_sync>; + ddc-i2c-bus = <&i2c2>; fsl,tve-mode = "vga"; - fsl,hsync-pin = <4>; - fsl,vsync-pin = <6>; + fsl,hsync-pin = <7>; /* IPU DI1 PIN7 via EIM_OE */ + fsl,vsync-pin = <8>; /* IPU DI1 PIN8 via EIM_RW */ status = "okay"; }; diff --git a/arch/arm/boot/dts/imx53-smd.dts b/arch/arm/boot/dts/imx53-smd.dts index 1d325576b..fc89ce1e5 100644 --- a/arch/arm/boot/dts/imx53-smd.dts +++ b/arch/arm/boot/dts/imx53-smd.dts @@ -41,8 +41,8 @@ &esdhc1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_esdhc1>; - cd-gpios = <&gpio3 13 0>; - wp-gpios = <&gpio4 11 0>; + cd-gpios = <&gpio3 13 GPIO_ACTIVE_LOW>; + wp-gpios = <&gpio4 11 GPIO_ACTIVE_HIGH>; status = "okay"; }; diff --git a/arch/arm/boot/dts/imx53-tqma53.dtsi b/arch/arm/boot/dts/imx53-tqma53.dtsi index 4f1f0e286..e03373a58 100644 --- a/arch/arm/boot/dts/imx53-tqma53.dtsi +++ b/arch/arm/boot/dts/imx53-tqma53.dtsi @@ -41,8 +41,8 @@ pinctrl-0 = <&pinctrl_esdhc2>, <&pinctrl_esdhc2_cdwp>; vmmc-supply = <®_3p3v>; - wp-gpios = <&gpio1 2 0>; - cd-gpios = <&gpio1 4 0>; + wp-gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>; + cd-gpios = <&gpio1 4 GPIO_ACTIVE_LOW>; status = "disabled"; }; diff --git a/arch/arm/boot/dts/imx53-tx53.dtsi b/arch/arm/boot/dts/imx53-tx53.dtsi index db4ce991d..7cbf9b8d9 100644 --- a/arch/arm/boot/dts/imx53-tx53.dtsi +++ b/arch/arm/boot/dts/imx53-tx53.dtsi @@ -183,7 +183,7 @@ }; &esdhc1 { - cd-gpios = <&gpio3 24 GPIO_ACTIVE_HIGH>; + cd-gpios = <&gpio3 24 GPIO_ACTIVE_LOW>; fsl,wp-controller; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_esdhc1>; @@ -191,7 +191,7 @@ }; &esdhc2 { - cd-gpios = <&gpio3 25 GPIO_ACTIVE_HIGH>; + cd-gpios = <&gpio3 25 GPIO_ACTIVE_LOW>; fsl,wp-controller; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_esdhc2>; diff --git a/arch/arm/boot/dts/imx53-voipac-bsb.dts b/arch/arm/boot/dts/imx53-voipac-bsb.dts index c17d3ad6d..fc51b87ad 100644 --- a/arch/arm/boot/dts/imx53-voipac-bsb.dts +++ b/arch/arm/boot/dts/imx53-voipac-bsb.dts @@ -119,8 +119,8 @@ &esdhc2 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_esdhc2>; - cd-gpios = <&gpio3 25 0>; - wp-gpios = <&gpio2 19 0>; + cd-gpios = <&gpio3 25 GPIO_ACTIVE_LOW>; + wp-gpios = <&gpio2 19 GPIO_ACTIVE_HIGH>; vmmc-supply = <®_3p3v>; status = "okay"; }; diff --git a/arch/arm/boot/dts/imx6dl-apf6dev.dts b/arch/arm/boot/dts/imx6dl-apf6dev.dts new file mode 100644 index 000000000..df26e542a --- /dev/null +++ b/arch/arm/boot/dts/imx6dl-apf6dev.dts @@ -0,0 +1,60 @@ +/* + * Copyright 2015 Armadeus Systems + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public + * License along with this file; if not, write to the Free + * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; +#include "imx6dl.dtsi" +#include "imx6qdl-apf6.dtsi" +#include "imx6qdl-apf6dev.dtsi" + +/ { + model = "Armadeus APF6 Solo Module on APF6Dev Board"; + compatible = "armadeus,imx6dl-apf6dev", "armadeus,imx6dl-apf6", "fsl,imx6dl"; + + memory { + reg = <0x10000000 0x20000000>; + }; +}; diff --git a/arch/arm/boot/dts/imx6dl-aristainetos2_4.dts b/arch/arm/boot/dts/imx6dl-aristainetos2_4.dts new file mode 100644 index 000000000..bb92f309c --- /dev/null +++ b/arch/arm/boot/dts/imx6dl-aristainetos2_4.dts @@ -0,0 +1,159 @@ +/* + * support for the imx6 based aristainetos2 board + * + * Copyright (C) 2015 Heiko Schocher <hs@denx.de> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This file is distributed in the hope that it will be useful + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ +/dts-v1/; +#include "imx6dl.dtsi" +#include "imx6qdl-aristainetos2.dtsi" + +/ { + model = "aristainetos2 i.MX6 Dual Lite Board 4"; + compatible = "fsl,imx6dl"; + + memory { + reg = <0x10000000 0x40000000>; + }; + + display0: display@di0 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,imx-parallel-display"; + interface-pix-fmt = "rgb24"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ipu_disp>; + + port@0 { + reg = <0>; + display0_in: endpoint { + remote-endpoint = <&ipu1_di0_disp0>; + }; + }; + + port@1 { + reg = <1>; + display_out: endpoint { + remote-endpoint = <&panel_in>; + }; + }; + }; +}; + +&ecspi1 { + lcd_panel: display@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "lg,lg4573"; + spi-max-frequency = <10000000>; + reg = <0>; + power-on-delay = <10>; + + display-timings { + 480x800p57 { + native-mode; + clock-frequency = <27000027>; + hactive = <480>; + vactive = <800>; + hfront-porch = <10>; + hback-porch = <59>; + hsync-len = <10>; + vback-porch = <15>; + vfront-porch = <15>; + vsync-len = <15>; + hsync-active = <1>; + vsync-active = <1>; + }; + }; + + port { + panel_in: endpoint { + remote-endpoint = <&display_out>; + }; + }; + }; +}; + +&i2c3 { + touch: touch@4b { + compatible = "atmel,maxtouch"; + reg = <0x4b>; + interrupt-parent = <&gpio2>; + interrupts = <9 8>; + }; +}; + +&ipu1_di0_disp0 { + remote-endpoint = <&display0_in>; +}; + +&iomuxc { + pinctrl_ipu_disp: ipudisp1grp { + fsl,pins = < + MX6QDL_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK 0x31 + MX6QDL_PAD_DI0_PIN15__IPU1_DI0_PIN15 0xE1 + MX6QDL_PAD_DI0_PIN2__IPU1_DI0_PIN02 0x10 + MX6QDL_PAD_DI0_PIN3__IPU1_DI0_PIN03 0x10 + MX6QDL_PAD_DISP0_DAT0__IPU1_DISP0_DATA00 0xE1 + MX6QDL_PAD_DISP0_DAT1__IPU1_DISP0_DATA01 0xE1 + MX6QDL_PAD_DISP0_DAT2__IPU1_DISP0_DATA02 0xE1 + MX6QDL_PAD_DISP0_DAT3__IPU1_DISP0_DATA03 0xE1 + MX6QDL_PAD_DISP0_DAT4__IPU1_DISP0_DATA04 0xE1 + MX6QDL_PAD_DISP0_DAT5__IPU1_DISP0_DATA05 0xE1 + MX6QDL_PAD_DISP0_DAT6__IPU1_DISP0_DATA06 0xE1 + MX6QDL_PAD_DISP0_DAT7__IPU1_DISP0_DATA07 0xE1 + MX6QDL_PAD_DISP0_DAT8__IPU1_DISP0_DATA08 0xE1 + MX6QDL_PAD_DISP0_DAT9__IPU1_DISP0_DATA09 0xE1 + MX6QDL_PAD_DISP0_DAT10__IPU1_DISP0_DATA10 0xE1 + MX6QDL_PAD_DISP0_DAT11__IPU1_DISP0_DATA11 0xE1 + MX6QDL_PAD_DISP0_DAT12__IPU1_DISP0_DATA12 0xE1 + MX6QDL_PAD_DISP0_DAT13__IPU1_DISP0_DATA13 0xE1 + MX6QDL_PAD_DISP0_DAT14__IPU1_DISP0_DATA14 0xe1 + MX6QDL_PAD_DISP0_DAT15__IPU1_DISP0_DATA15 0xE1 + MX6QDL_PAD_DISP0_DAT16__IPU1_DISP0_DATA16 0xE1 + MX6QDL_PAD_DISP0_DAT17__IPU1_DISP0_DATA17 0xE1 + MX6QDL_PAD_DISP0_DAT18__IPU1_DISP0_DATA18 0xE1 + MX6QDL_PAD_DISP0_DAT19__IPU1_DISP0_DATA19 0xE1 + MX6QDL_PAD_DISP0_DAT20__IPU1_DISP0_DATA20 0xE1 + MX6QDL_PAD_DISP0_DAT21__IPU1_DISP0_DATA21 0xE1 + MX6QDL_PAD_DISP0_DAT22__IPU1_DISP0_DATA22 0xE1 + MX6QDL_PAD_DISP0_DAT23__IPU1_DISP0_DATA23 0xE1 + >; + }; +}; diff --git a/arch/arm/boot/dts/imx6dl-aristainetos2_7.dts b/arch/arm/boot/dts/imx6dl-aristainetos2_7.dts new file mode 100644 index 000000000..3d5ad2cc7 --- /dev/null +++ b/arch/arm/boot/dts/imx6dl-aristainetos2_7.dts @@ -0,0 +1,97 @@ +/* + * support for the imx6 based aristainetos2 board + * + * Copyright (C) 2015 Heiko Schocher <hs@denx.de> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This file is distributed in the hope that it will be useful + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ +/dts-v1/; +#include "imx6dl.dtsi" +#include "imx6qdl-aristainetos2.dtsi" + +/ { + model = "aristainetos2 i.MX6 Dual Lite Board 7"; + compatible = "fsl,imx6dl"; + + memory { + reg = <0x10000000 0x40000000>; + }; + + panel: panel { + compatible = "lg,lb070wv8"; + backlight = <&backlight>; + enable-gpios = <&gpio6 15 GPIO_ACTIVE_HIGH>; + + port { + panel_in: endpoint { + remote-endpoint = <&lvds0_out>; + }; + }; + }; +}; + +&i2c3 { + touch: touch@4d { + compatible = "atmel,maxtouch"; + reg = <0x4d>; + interrupt-parent = <&gpio2>; + interrupts = <9 8>; + }; +}; + +&ldb { + status = "okay"; + + lvds-channel@0 { + status = "okay"; + + port@0 { + reg = <0>; + lvds0_in: endpoint { + remote-endpoint = <&ipu1_di0_lvds0>; + }; + }; + + port@4 { + reg = <4>; + lvds0_out: endpoint { + remote-endpoint = <&panel_in>; + }; + }; + }; +}; diff --git a/arch/arm/boot/dts/imx6dl-cubox-i.dts b/arch/arm/boot/dts/imx6dl-cubox-i.dts index e0b7fe8e1..2a43917d0 100644 --- a/arch/arm/boot/dts/imx6dl-cubox-i.dts +++ b/arch/arm/boot/dts/imx6dl-cubox-i.dts @@ -7,9 +7,8 @@ * whole. * * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License. + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. * * This file is distributed in the hope that it will be useful * but WITHOUT ANY WARRANTY; without even the implied warranty of diff --git a/arch/arm/boot/dts/imx6dl-gw551x.dts b/arch/arm/boot/dts/imx6dl-gw551x.dts new file mode 100644 index 000000000..82d5f8572 --- /dev/null +++ b/arch/arm/boot/dts/imx6dl-gw551x.dts @@ -0,0 +1,55 @@ +/* + * Copyright 2014 Gateworks Corporation + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public + * License along with this file; if not, write to the Free + * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; +#include "imx6dl.dtsi" +#include "imx6qdl-gw551x.dtsi" + +/ { + model = "Gateworks Ventana i.MX6 DualLite/Solo GW551X"; + compatible = "gw,imx6dl-gw551x", "gw,ventana", "fsl,imx6dl"; +}; diff --git a/arch/arm/boot/dts/imx6dl-hummingboard.dts b/arch/arm/boot/dts/imx6dl-hummingboard.dts index 7369d2d7d..d5c966031 100644 --- a/arch/arm/boot/dts/imx6dl-hummingboard.dts +++ b/arch/arm/boot/dts/imx6dl-hummingboard.dts @@ -8,9 +8,8 @@ * whole. * * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License. + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. * * This file is distributed in the hope that it will be useful * but WITHOUT ANY WARRANTY; without even the implied warranty of diff --git a/arch/arm/boot/dts/imx6dl-riotboard.dts b/arch/arm/boot/dts/imx6dl-riotboard.dts index 43cb3fd76..5111f5170 100644 --- a/arch/arm/boot/dts/imx6dl-riotboard.dts +++ b/arch/arm/boot/dts/imx6dl-riotboard.dts @@ -305,8 +305,8 @@ &usdhc2 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usdhc2>; - cd-gpios = <&gpio1 4 0>; - wp-gpios = <&gpio1 2 0>; + cd-gpios = <&gpio1 4 GPIO_ACTIVE_LOW>; + wp-gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>; vmmc-supply = <®_3p3v>; status = "okay"; }; @@ -314,8 +314,8 @@ &usdhc3 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usdhc3>; - cd-gpios = <&gpio7 0 0>; - wp-gpios = <&gpio7 1 0>; + cd-gpios = <&gpio7 0 GPIO_ACTIVE_LOW>; + wp-gpios = <&gpio7 1 GPIO_ACTIVE_HIGH>; vmmc-supply = <®_3p3v>; status = "okay"; }; diff --git a/arch/arm/boot/dts/imx6dl.dtsi b/arch/arm/boot/dts/imx6dl.dtsi index f94bf7283..4b0ec0703 100644 --- a/arch/arm/boot/dts/imx6dl.dtsi +++ b/arch/arm/boot/dts/imx6dl.dtsi @@ -106,6 +106,10 @@ }; }; +&gpt { + compatible = "fsl,imx6dl-gpt", "fsl,imx6q-gpt"; +}; + &hdmi { compatible = "fsl,imx6dl-hdmi"; }; diff --git a/arch/arm/boot/dts/imx6q-apf6dev.dts b/arch/arm/boot/dts/imx6q-apf6dev.dts new file mode 100644 index 000000000..4e4de821d --- /dev/null +++ b/arch/arm/boot/dts/imx6q-apf6dev.dts @@ -0,0 +1,64 @@ +/* + * Copyright 2015 Armadeus Systems + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public + * License along with this file; if not, write to the Free + * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; +#include "imx6q.dtsi" +#include "imx6qdl-apf6.dtsi" +#include "imx6qdl-apf6dev.dtsi" + +/ { + model = "Armadeus APF6 Quad / Dual Module on APF6Dev Board"; + compatible = "armadeus,imx6q-apf6dev", "armadeus,imx6q-apf6", "fsl,imx6q"; + + memory { + reg = <0x10000000 0x40000000>; + }; +}; + +&sata { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/imx6q-arm2.dts b/arch/arm/boot/dts/imx6q-arm2.dts index 78df05e9d..d6515f7a5 100644 --- a/arch/arm/boot/dts/imx6q-arm2.dts +++ b/arch/arm/boot/dts/imx6q-arm2.dts @@ -11,6 +11,7 @@ */ /dts-v1/; +#include <dt-bindings/gpio/gpio.h> #include "imx6q.dtsi" / { @@ -196,8 +197,8 @@ }; &usdhc3 { - cd-gpios = <&gpio6 11 0>; - wp-gpios = <&gpio6 14 0>; + cd-gpios = <&gpio6 11 GPIO_ACTIVE_LOW>; + wp-gpios = <&gpio6 14 GPIO_ACTIVE_HIGH>; vmmc-supply = <®_3p3v>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usdhc3 diff --git a/arch/arm/boot/dts/imx6q-cubox-i.dts b/arch/arm/boot/dts/imx6q-cubox-i.dts index 670bd8c4c..353425edc 100644 --- a/arch/arm/boot/dts/imx6q-cubox-i.dts +++ b/arch/arm/boot/dts/imx6q-cubox-i.dts @@ -7,9 +7,8 @@ * whole. * * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License. + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. * * This file is distributed in the hope that it will be useful * but WITHOUT ANY WARRANTY; without even the implied warranty of diff --git a/arch/arm/boot/dts/imx6q-gk802.dts b/arch/arm/boot/dts/imx6q-gk802.dts index 703539cf3..00bd63e63 100644 --- a/arch/arm/boot/dts/imx6q-gk802.dts +++ b/arch/arm/boot/dts/imx6q-gk802.dts @@ -7,6 +7,7 @@ */ /dts-v1/; +#include <dt-bindings/gpio/gpio.h> #include "imx6q.dtsi" / { @@ -161,7 +162,7 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usdhc3>; bus-width = <4>; - cd-gpios = <&gpio6 11 0>; + cd-gpios = <&gpio6 11 GPIO_ACTIVE_LOW>; vmmc-supply = <®_3p3v>; status = "okay"; }; diff --git a/arch/arm/boot/dts/imx6q-gw551x.dts b/arch/arm/boot/dts/imx6q-gw551x.dts new file mode 100644 index 000000000..2c7feeef1 --- /dev/null +++ b/arch/arm/boot/dts/imx6q-gw551x.dts @@ -0,0 +1,55 @@ +/* + * Copyright 2014 Gateworks Corporation + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public + * License along with this file; if not, write to the Free + * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; +#include "imx6q.dtsi" +#include "imx6qdl-gw551x.dtsi" + +/ { + model = "Gateworks Ventana i.MX6 Dual/Quad GW551X"; + compatible = "gw,imx6q-gw551x", "gw,ventana", "fsl,imx6q"; +}; diff --git a/arch/arm/boot/dts/imx6q-hummingboard.dts b/arch/arm/boot/dts/imx6q-hummingboard.dts index 0f6044553..1884c1678 100644 --- a/arch/arm/boot/dts/imx6q-hummingboard.dts +++ b/arch/arm/boot/dts/imx6q-hummingboard.dts @@ -8,9 +8,8 @@ * whole. * * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License. + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. * * This file is distributed in the hope that it will be useful * but WITHOUT ANY WARRANTY; without even the implied warranty of diff --git a/arch/arm/boot/dts/imx6q-tbs2910.dts b/arch/arm/boot/dts/imx6q-tbs2910.dts index a43abfa21..5645d5285 100644 --- a/arch/arm/boot/dts/imx6q-tbs2910.dts +++ b/arch/arm/boot/dts/imx6q-tbs2910.dts @@ -251,7 +251,7 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usdhc2>; bus-width = <4>; - cd-gpios = <&gpio2 2 GPIO_ACTIVE_HIGH>; + cd-gpios = <&gpio2 2 GPIO_ACTIVE_LOW>; vmmc-supply = <®_3p3v>; status = "okay"; }; @@ -260,7 +260,7 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usdhc3>; bus-width = <4>; - cd-gpios = <&gpio2 0 GPIO_ACTIVE_HIGH>; + cd-gpios = <&gpio2 0 GPIO_ACTIVE_LOW>; wp-gpios = <&gpio2 1 GPIO_ACTIVE_HIGH>; vmmc-supply = <®_3p3v>; status = "okay"; diff --git a/arch/arm/boot/dts/imx6qdl-apf6.dtsi b/arch/arm/boot/dts/imx6qdl-apf6.dtsi new file mode 100644 index 000000000..1ebf29f43 --- /dev/null +++ b/arch/arm/boot/dts/imx6qdl-apf6.dtsi @@ -0,0 +1,158 @@ +/* + * Copyright 2015 Armadeus Systems + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public + * License along with this file; if not, write to the Free + * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/interrupt-controller/irq.h> + +&fec { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_enet>; + phy-mode = "rgmii"; + phy-reset-duration = <10>; + phy-reset-gpios = <&gpio1 24 GPIO_ACTIVE_LOW>; + status = "okay"; +}; + +/* Bluetooth */ +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart2>; + status = "okay"; +}; + +/* Wi-Fi */ +&usdhc1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc1>; + non-removable; + status = "okay"; + + #address-cells = <1>; + #size-cells = <0>; + wlcore: wlcore@2 { + compatible = "ti,wl1271"; + reg = <2>; + interrupt-parent = <&gpio2>; + interrupts = <10 IRQ_TYPE_LEVEL_HIGH>; + ref-clock-frequency = <38400000>; + tcxo-clock-frequency = <38400000>; + }; +}; + +/* eMMC */ +&usdhc3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc3>; + bus-width = <8>; + no-1-8-v; + non-removable; + status = "okay"; +}; + +&iomuxc { + apf6 { + pinctrl_enet: enetgrp { + fsl,pins = < + MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b8b0 + MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0 + MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x1b0b0 + MX6QDL_PAD_ENET_RX_ER__GPIO1_IO24 0x130b0 + MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28 0x130b0 + MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x1b030 + MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x1b030 + MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x1b030 + MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x1b030 + MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x1b030 + MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b030 + MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x13030 + MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x1b030 + MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x13030 + MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1f030 + MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1f030 + MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x13030 + >; + }; + + pinctrl_uart2: uart2grp { + fsl,pins = < + MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA 0x1b0b0 + MX6QDL_PAD_SD4_DAT5__UART2_RTS_B 0x1b0b0 + MX6QDL_PAD_SD4_DAT6__UART2_CTS_B 0x1b0b0 + MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA 0x1b0b0 + MX6QDL_PAD_SD4_DAT3__GPIO2_IO11 0x130b0 /* BT_EN */ + >; + }; + + pinctrl_usdhc1: usdhc1grp { + fsl,pins = < + MX6QDL_PAD_SD1_CMD__SD1_CMD 0x17059 + MX6QDL_PAD_SD1_CLK__SD1_CLK 0x10059 + MX6QDL_PAD_SD1_DAT0__SD1_DATA0 0x17059 + MX6QDL_PAD_SD1_DAT1__SD1_DATA1 0x17059 + MX6QDL_PAD_SD1_DAT2__SD1_DATA2 0x17059 + MX6QDL_PAD_SD1_DAT3__SD1_DATA3 0x17059 + MX6QDL_PAD_SD4_DAT0__GPIO2_IO08 0x1b0b0 /* WL_EN */ + MX6QDL_PAD_SD4_DAT2__GPIO2_IO10 0x1b0b0 /* WL_IRQ */ + >; + }; + + pinctrl_usdhc3: usdhc3grp { + fsl,pins = < + MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17059 + MX6QDL_PAD_SD3_CLK__SD3_CLK 0x10059 + MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17059 + MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059 + MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059 + MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059 + MX6QDL_PAD_SD3_DAT4__SD3_DATA4 0x17059 + MX6QDL_PAD_SD3_DAT5__SD3_DATA5 0x17059 + MX6QDL_PAD_SD3_DAT6__SD3_DATA6 0x17059 + MX6QDL_PAD_SD3_DAT7__SD3_DATA7 0x17059 + >; + }; + }; +}; diff --git a/arch/arm/boot/dts/imx6qdl-apf6dev.dtsi b/arch/arm/boot/dts/imx6qdl-apf6dev.dtsi new file mode 100644 index 000000000..e26ebeb5b --- /dev/null +++ b/arch/arm/boot/dts/imx6qdl-apf6dev.dtsi @@ -0,0 +1,479 @@ +/* + * Copyright 2015 Armadeus Systems + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public + * License along with this file; if not, write to the Free + * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> +#include <dt-bindings/interrupt-controller/irq.h> + +/ { + chosen { + stdout-path = &uart4; + }; + + display@di0 { + compatible = "fsl,imx-parallel-display"; + interface-pix-fmt = "bgr666"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ipu1_disp1>; + + display-timings { + lw700 { + clock-frequency = <33000033>; + hactive = <800>; + vactive = <480>; + hback-porch = <96>; + hfront-porch = <96>; + vback-porch = <20>; + vfront-porch = <21>; + hsync-len = <64>; + vsync-len = <4>; + hsync-active = <1>; + vsync-active = <1>; + de-active = <1>; + pixelclk-active = <1>; + }; + }; + + port { + display_in: endpoint { + remote-endpoint = <&ipu1_di0_disp0>; + }; + }; + }; + + gpio-keys { + compatible = "gpio-keys"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpio_keys>; + + user-button { + label = "User button"; + gpios = <&gpio1 9 GPIO_ACTIVE_LOW>; + linux,code = <BTN_MISC>; + gpio-key,wakeup; + }; + }; + + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpio_leds>; + + user-led { + label = "User LED"; + gpios = <&gpio7 12 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "heartbeat"; + default-state = "on"; + }; + }; + + regulators { + compatible = "simple-bus"; + + reg_3p3v: 3p3v { + compatible = "regulator-fixed"; + regulator-name = "3P3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + reg_usbh1_vbus: usb-h1-vbus { + compatible = "regulator-fixed"; + regulator-name = "usb_h1_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + }; + + reg_usb_otg_vbus: usb-otg-vbus { + compatible = "regulator-fixed"; + regulator-name = "usb_otg_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + }; + }; + + sound { + compatible = "fsl,imx6-armadeus-sgtl5000", + "fsl,imx-audio-sgtl5000"; + model = "imx6-armadeus-sgtl5000"; + ssi-controller = <&ssi1>; + audio-codec = <&codec>; + audio-routing = + "MIC_IN", "Mic Jack", + "Mic Jack", "Mic Bias", + "Headphone Jack", "HP_OUT"; + mux-int-port = <1>; + mux-ext-port = <3>; + }; + + sound-spdif { + compatible = "fsl,imx-audio-spdif"; + model = "imx-spdif"; + spdif-controller = <&spdif>; + spdif-out; + }; +}; + +&audmux { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_audmux>; + status = "okay"; +}; + +&can2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_flexcan2>; + status = "okay"; +}; + +&ecspi1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ecspi1>; + fsl,spi-num-chipselects = <3>; + cs-gpios = <&gpio4 9 GPIO_ACTIVE_LOW>, + <&gpio4 10 GPIO_ACTIVE_LOW>, + <&gpio4 11 GPIO_ACTIVE_LOW>; + status = "okay"; +}; + +&hdmi { + ddc-i2c-bus = <&i2c3>; + status = "okay"; +}; + +&i2c1 { + clock-frequency = <400000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c1>; + status = "okay"; + + touchscreen@48 { + compatible = "semtech,sx8654"; + reg = <0x48>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_touchscreen>; + interrupt-parent = <&gpio6>; + interrupts = <3 IRQ_TYPE_EDGE_FALLING>; + }; +}; + +&i2c2 { + clock-frequency = <400000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c2>; + status = "okay"; + + codec: sgtl5000@0a { + compatible = "fsl,sgtl5000"; + reg = <0x0a>; + clocks = <&clks 201>; + VDDA-supply = <®_3p3v>; + VDDIO-supply = <®_3p3v>; + }; +}; + +&i2c3 { + clock-frequency = <400000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c3>; + status = "okay"; +}; + +&ipu1_di0_disp0 { + remote-endpoint = <&display_in>; +}; + +&pcie { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pcie>; + reset-gpio = <&gpio6 2 GPIO_ACTIVE_HIGH>; + status = "okay"; +}; + +&pwm3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm3>; + status = "okay"; +}; + +/* GPS */ +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1>; + status = "okay"; +}; + +/* GSM */ +&uart3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart3 &pinctrl_gsm>; + fsl,uart-has-rtscts; + status = "okay"; +}; + +/* console */ +&uart4 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart4>; + status = "okay"; +}; + +&usbh1 { + vbus-supply = <®_usbh1_vbus>; + phy_type = "utmi"; + status = "okay"; +}; + +&usbotg { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbotg>; + vbus-supply = <®_usb_otg_vbus>; + dr_mode = "otg"; + status = "okay"; +}; + +/* microSD */ +&usdhc2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc2>; + cd-gpios = <&gpio1 2 GPIO_ACTIVE_LOW>; + no-1-8-v; + status = "okay"; +}; + +&spdif { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_spdif>; + status = "okay"; +}; + +&ssi1 { + status = "okay"; +}; + +&iomuxc { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpios>; + + apf6dev { + pinctrl_audmux: audmuxgrp { + fsl,pins = < + MX6QDL_PAD_CSI0_DAT4__AUD3_TXC 0x1b0b0 + MX6QDL_PAD_CSI0_DAT5__AUD3_TXD 0x1b0b0 + MX6QDL_PAD_CSI0_DAT6__AUD3_TXFS 0x1b0b0 + MX6QDL_PAD_CSI0_DAT7__AUD3_RXD 0x1b0b0 + MX6QDL_PAD_GPIO_0__CCM_CLKO1 0x130b0 + >; + }; + + pinctrl_ecspi1: ecspi1grp { + fsl,pins = < + MX6QDL_PAD_KEY_COL1__ECSPI1_MISO 0x100b1 + MX6QDL_PAD_KEY_ROW0__ECSPI1_MOSI 0x100b1 + MX6QDL_PAD_KEY_COL0__ECSPI1_SCLK 0x100b1 + MX6QDL_PAD_KEY_ROW1__GPIO4_IO09 0x1b0b0 + MX6QDL_PAD_KEY_ROW2__GPIO4_IO11 0x1b0b0 + MX6QDL_PAD_KEY_COL2__GPIO4_IO10 0x1b0b0 + >; + }; + + pinctrl_flexcan2: flexcan2grp { + fsl,pins = < + MX6QDL_PAD_KEY_COL4__FLEXCAN2_TX 0x1b0b0 + MX6QDL_PAD_KEY_ROW4__FLEXCAN2_RX 0x1b0b0 + >; + }; + + pinctrl_gpio_keys: gpiokeysgrp { + fsl,pins = < + MX6QDL_PAD_GPIO_9__GPIO1_IO09 0x1b0b0 + >; + }; + + pinctrl_gpio_leds: gpioledsgrp { + fsl,pins = < + MX6QDL_PAD_GPIO_17__GPIO7_IO12 0x130b0 + >; + }; + + pinctrl_gpios: gpiosgrp { + fsl,pins = < + MX6QDL_PAD_DI0_PIN4__GPIO4_IO20 0x100b1 + MX6QDL_PAD_DISP0_DAT18__GPIO5_IO12 0x100b1 + MX6QDL_PAD_DISP0_DAT19__GPIO5_IO13 0x100b1 + MX6QDL_PAD_DISP0_DAT20__GPIO5_IO14 0x100b1 + MX6QDL_PAD_DISP0_DAT21__GPIO5_IO15 0x100b1 + MX6QDL_PAD_DISP0_DAT22__GPIO5_IO16 0x100b1 + MX6QDL_PAD_DISP0_DAT23__GPIO5_IO17 0x100b1 + MX6QDL_PAD_CSI0_PIXCLK__GPIO5_IO18 0x100b1 + MX6QDL_PAD_CSI0_VSYNC__GPIO5_IO21 0x100b1 + >; + }; + + pinctrl_gsm: gsmgrp { + fsl,pins = < + MX6QDL_PAD_GPIO_4__GPIO1_IO04 0x130b0 /* GSM_POKIN */ + MX6QDL_PAD_GPIO_18__GPIO7_IO13 0x130b0 /* GSM_PWR_EN */ + >; + }; + + pinctrl_i2c1: i2c1grp { + fsl,pins = < + MX6QDL_PAD_CSI0_DAT8__I2C1_SDA 0x4001b8b1 + MX6QDL_PAD_CSI0_DAT9__I2C1_SCL 0x4001b8b1 + >; + }; + + pinctrl_i2c2: i2c2grp { + fsl,pins = < + MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1 + MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1 + >; + }; + + pinctrl_i2c3: i2c3grp { + fsl,pins = < + MX6QDL_PAD_GPIO_6__I2C3_SDA 0x4001b8b1 + MX6QDL_PAD_GPIO_5__I2C3_SCL 0x4001b8b1 + >; + }; + + pinctrl_ipu1_disp1: ipu1disp1grp { + fsl,pins = < + MX6QDL_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK 0x100b1 + MX6QDL_PAD_DI0_PIN15__IPU1_DI0_PIN15 0x100b1 + MX6QDL_PAD_DI0_PIN2__IPU1_DI0_PIN02 0x100b1 + MX6QDL_PAD_DI0_PIN3__IPU1_DI0_PIN03 0x100b1 + MX6QDL_PAD_DISP0_DAT0__IPU1_DISP0_DATA00 0x100b1 + MX6QDL_PAD_DISP0_DAT1__IPU1_DISP0_DATA01 0x100b1 + MX6QDL_PAD_DISP0_DAT2__IPU1_DISP0_DATA02 0x100b1 + MX6QDL_PAD_DISP0_DAT3__IPU1_DISP0_DATA03 0x100b1 + MX6QDL_PAD_DISP0_DAT4__IPU1_DISP0_DATA04 0x100b1 + MX6QDL_PAD_DISP0_DAT5__IPU1_DISP0_DATA05 0x100b1 + MX6QDL_PAD_DISP0_DAT6__IPU1_DISP0_DATA06 0x100b1 + MX6QDL_PAD_DISP0_DAT7__IPU1_DISP0_DATA07 0x100b1 + MX6QDL_PAD_DISP0_DAT8__IPU1_DISP0_DATA08 0x100b1 + MX6QDL_PAD_DISP0_DAT9__IPU1_DISP0_DATA09 0x100b1 + MX6QDL_PAD_DISP0_DAT10__IPU1_DISP0_DATA10 0x100b1 + MX6QDL_PAD_DISP0_DAT11__IPU1_DISP0_DATA11 0x100b1 + MX6QDL_PAD_DISP0_DAT12__IPU1_DISP0_DATA12 0x100b1 + MX6QDL_PAD_DISP0_DAT13__IPU1_DISP0_DATA13 0x100b1 + MX6QDL_PAD_DISP0_DAT14__IPU1_DISP0_DATA14 0x100b1 + MX6QDL_PAD_DISP0_DAT15__IPU1_DISP0_DATA15 0x100b1 + MX6QDL_PAD_DISP0_DAT16__IPU1_DISP0_DATA16 0x100b1 + MX6QDL_PAD_DISP0_DAT17__IPU1_DISP0_DATA17 0x100b1 + >; + }; + + pinctrl_pcie: pciegrp { + fsl,pins = < + MX6QDL_PAD_CSI0_DAT16__GPIO6_IO02 0x130b0 + >; + }; + + pinctrl_pwm3: pwm3grp { + fsl,pins = < + MX6QDL_PAD_SD4_DAT1__PWM3_OUT 0x1b0b1 + >; + }; + + pinctrl_uart1: uart1grp { + fsl,pins = < + MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA 0x1b0b0 + MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA 0x1b0b0 + >; + }; + + pinctrl_uart3: uart3grp { + fsl,pins = < + MX6QDL_PAD_EIM_D23__UART3_CTS_B 0x1b0b0 + MX6QDL_PAD_EIM_D24__UART3_TX_DATA 0x1b0b0 + MX6QDL_PAD_EIM_D25__UART3_RX_DATA 0x1b0b0 + MX6QDL_PAD_EIM_D31__UART3_RTS_B 0x1b0b0 + >; + }; + + pinctrl_uart4: uart4grp { + fsl,pins = < + MX6QDL_PAD_CSI0_DAT12__UART4_TX_DATA 0x1b0b0 + MX6QDL_PAD_CSI0_DAT13__UART4_RX_DATA 0x1b0b0 + >; + }; + + pinctrl_usbotg: usbotggrp { + fsl,pins = < + MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x1b0b0 + >; + }; + + pinctrl_usdhc2: usdhc2grp { + fsl,pins = < + MX6QDL_PAD_SD2_CMD__SD2_CMD 0x17059 + MX6QDL_PAD_SD2_CLK__SD2_CLK 0x10059 + MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x17059 + MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x17059 + MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x17059 + MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x17059 + >; + }; + + pinctrl_spdif: spdifgrp { + fsl,pins = < + MX6QDL_PAD_GPIO_19__SPDIF_OUT 0x1b0b0 + >; + }; + + pinctrl_touchscreen: touchscreengrp { + fsl,pins = < + MX6QDL_PAD_CSI0_DAT17__GPIO6_IO03 0x1b0b0 + >; + }; + }; +}; diff --git a/arch/arm/boot/dts/imx6qdl-aristainetos.dtsi b/arch/arm/boot/dts/imx6qdl-aristainetos.dtsi index e6d9195a1..f4d6ae564 100644 --- a/arch/arm/boot/dts/imx6qdl-aristainetos.dtsi +++ b/arch/arm/boot/dts/imx6qdl-aristainetos.dtsi @@ -173,7 +173,7 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usdhc1>; vmmc-supply = <®_3p3v>; - cd-gpios = <&gpio4 7 GPIO_ACTIVE_HIGH>; + cd-gpios = <&gpio4 7 GPIO_ACTIVE_LOW>; status = "okay"; }; @@ -181,7 +181,7 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usdhc2>; vmmc-supply = <®_3p3v>; - cd-gpios = <&gpio4 8 GPIO_ACTIVE_HIGH>; + cd-gpios = <&gpio4 8 GPIO_ACTIVE_LOW>; status = "okay"; }; diff --git a/arch/arm/boot/dts/imx6qdl-aristainetos2.dtsi b/arch/arm/boot/dts/imx6qdl-aristainetos2.dtsi new file mode 100644 index 000000000..a47a0399a --- /dev/null +++ b/arch/arm/boot/dts/imx6qdl-aristainetos2.dtsi @@ -0,0 +1,633 @@ +/* + * support for the imx6 based aristainetos2 board + * + * Copyright (C) 2015 Heiko Schocher <hs@denx.de> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This file is distributed in the hope that it will be useful + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/clock/imx6qdl-clock.h> + +/ { + backlight: backlight { + compatible = "pwm-backlight"; + pwms = <&pwm1 0 5000000>; + brightness-levels = <0 4 8 16 32 64 128 255>; + default-brightness-level = <7>; + enable-gpios = <&gpio6 31 GPIO_ACTIVE_HIGH>; + }; + + regulators { + compatible = "simple-bus"; + + reg_2p5v: 2p5v { + compatible = "regulator-fixed"; + regulator-name = "2P5V"; + regulator-min-microvolt = <2500000>; + regulator-max-microvolt = <2500000>; + regulator-always-on; + }; + + reg_3p3v: 3p3v { + compatible = "regulator-fixed"; + regulator-name = "3P3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + reg_usbh1_vbus: usb-h1-vbus { + compatible = "regulator-fixed"; + enable-active-high; + gpio = <&gpio1 0 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_aristainetos2_usbh1_vbus>; + regulator-name = "usb_h1_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + }; + + reg_usbotg_vbus: usb-otg-vbus { + compatible = "regulator-fixed"; + enable-active-high; + gpio = <&gpio4 15 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_aristainetos2_usbotg_vbus>; + regulator-name = "usb_otg_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + }; + }; +}; + +&audmux { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_audmux>; + status = "okay"; +}; + +&can1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_flexcan1>; + status = "okay"; +}; + +&can2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_flexcan2>; + status = "okay"; +}; + +&ecspi1 { + fsl,spi-num-chipselects = <3>; + cs-gpios = <&gpio4 9 GPIO_ACTIVE_HIGH + &gpio4 10 GPIO_ACTIVE_HIGH + &gpio4 11 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ecspi1>; + status = "okay"; +}; + +&ecspi2 { + fsl,spi-num-chipselects = <2>; + cs-gpios = <&gpio2 26 GPIO_ACTIVE_HIGH &gpio2 27 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ecspi2>; + status = "okay"; +}; + +&ecspi4 { + fsl,spi-num-chipselects = <2>; + cs-gpios = <&gpio3 29 GPIO_ACTIVE_HIGH &gpio5 2 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ecspi4>; + status = "okay"; + + flash: m25p80@1 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "micron,n25q128a11"; + spi-max-frequency = <20000000>; + reg = <1>; + }; +}; + +&i2c1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c1>; + status = "okay"; + + pmic@58 { + compatible = "dlg,da9063"; + reg = <0x58>; + interrupt-parent = <&gpio1>; + interrupts = <04 0x8>; + + regulators { + bcore1 { + regulator-name = "bcore1"; + regulator-always-on = <1>; + regulator-min-microvolt = <300000>; + regulator-max-microvolt = <3300000>; + }; + + bcore2 { + regulator-name = "bcore2"; + regulator-always-on = <1>; + regulator-min-microvolt = <300000>; + regulator-max-microvolt = <3300000>; + }; + + bpro { + regulator-name = "bpro"; + regulator-always-on = <1>; + regulator-min-microvolt = <300000>; + regulator-max-microvolt = <3300000>; + }; + + bperi { + regulator-name = "bperi"; + regulator-always-on = <1>; + regulator-min-microvolt = <300000>; + regulator-max-microvolt = <3300000>; + }; + + bmem { + regulator-name = "bmem"; + regulator-always-on = <1>; + regulator-min-microvolt = <300000>; + regulator-max-microvolt = <3300000>; + }; + + ldo2 { + regulator-name = "ldo2"; + regulator-always-on = <1>; + regulator-min-microvolt = <300000>; + regulator-max-microvolt = <1800000>; + }; + + ldo3 { + regulator-name = "ldo3"; + regulator-always-on = <1>; + regulator-min-microvolt = <300000>; + regulator-max-microvolt = <3300000>; + }; + + ldo4 { + regulator-name = "ldo4"; + regulator-always-on = <1>; + regulator-min-microvolt = <300000>; + regulator-max-microvolt = <3300000>; + }; + + ldo5 { + regulator-name = "ldo5"; + regulator-always-on = <1>; + regulator-min-microvolt = <300000>; + regulator-max-microvolt = <3300000>; + }; + + ldo6 { + regulator-name = "ldo6"; + regulator-always-on = <1>; + regulator-min-microvolt = <300000>; + regulator-max-microvolt = <3300000>; + }; + + ldo7 { + regulator-name = "ldo7"; + regulator-always-on = <1>; + regulator-min-microvolt = <300000>; + regulator-max-microvolt = <3300000>; + }; + + ldo8 { + regulator-name = "ldo8"; + regulator-always-on = <1>; + regulator-min-microvolt = <300000>; + regulator-max-microvolt = <3300000>; + }; + + ldo9 { + regulator-name = "ldo9"; + regulator-always-on = <1>; + regulator-min-microvolt = <300000>; + regulator-max-microvolt = <3300000>; + }; + + ldo10 { + regulator-name = "ldo10"; + regulator-always-on = <1>; + regulator-min-microvolt = <300000>; + regulator-max-microvolt = <3300000>; + }; + + ldo11 { + regulator-name = "ldo11"; + regulator-always-on = <1>; + regulator-min-microvolt = <300000>; + regulator-max-microvolt = <3300000>; + }; + + bio { + regulator-name = "bio"; + regulator-always-on = <1>; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + }; + }; + + tmp103: tmp103@71 { + compatible = "ti,tmp103"; + reg = <0x71>; + }; +}; + +&i2c2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c2>; + status = "okay"; +}; + +&i2c3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c3>; + status = "okay"; + + expander: tca6416@20 { + compatible = "ti,tca6416"; + reg = <0x20>; + #gpio-cells = <2>; + gpio-controller; + }; + + rtc@68 { + compatible = "dallas,m41t00"; + reg = <0x68>; + }; +}; + +&i2c4 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c4>; + status = "okay"; + + eeprom@50{ + compatible = "atmel,24c64"; + reg = <0x50>; + }; + + eeprom@57{ + compatible = "atmel,24c64"; + reg = <0x57>; + }; +}; + +&fec { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_enet>; + phy-mode = "rgmii"; + phy-reset-gpios = <&gpio7 18 GPIO_ACTIVE_HIGH>; + txd0-skew-ps = <0>; + txd1-skew-ps = <0>; + txd2-skew-ps = <0>; + txd3-skew-ps = <0>; + status = "okay"; +}; + +&gpmi { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpmi_nand>; + status = "okay"; +}; + +&pcie { + reset-gpio = <&gpio2 16 GPIO_ACTIVE_HIGH>; + status = "okay"; +}; + +&pwm1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm1>; + status = "okay"; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1>; + fsl,uart-has-rtscts; + status = "okay"; +}; + +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart2>; + status = "okay"; +}; + +&uart3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart3>; + fsl,uart-has-rtscts; + status = "okay"; +}; + +&uart4 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart4>; + status = "okay"; +}; + +&usbh1 { + vbus-supply = <®_usbh1_vbus>; + dr_mode = "host"; + status = "okay"; +}; + +&usbotg { + vbus-supply = <®_usbotg_vbus>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbotg>; + disable-over-current; + dr_mode = "host"; + status = "okay"; +}; + +&usdhc1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc1>; + cd-gpios = <&gpio1 27 GPIO_ACTIVE_LOW>; + no-1-8-v; + status = "okay"; +}; + +&usdhc2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc2>; + cd-gpios = <&gpio4 5 GPIO_ACTIVE_LOW>; + wp-gpios = <&gpio2 10 GPIO_ACTIVE_HIGH>; + no-1-8-v; + status = "okay"; +}; + +&iomuxc { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpio>; + + pinctrl_audmux: audmux { + fsl,pins = < + MX6QDL_PAD_CSI0_DAT7__AUD3_RXD 0x1b0b0 + MX6QDL_PAD_CSI0_DAT4__AUD3_TXC 0x1b0b0 + MX6QDL_PAD_CSI0_DAT5__AUD3_TXD 0x1b0b0 + MX6QDL_PAD_CSI0_DAT6__AUD3_TXFS 0x1b0b0 + >; + }; + + pinctrl_ecspi1: ecspi1grp { + fsl,pins = < + MX6QDL_PAD_EIM_D17__ECSPI1_MISO 0x100b1 + MX6QDL_PAD_EIM_D18__ECSPI1_MOSI 0x100b1 + MX6QDL_PAD_EIM_D16__ECSPI1_SCLK 0x100b1 + MX6QDL_PAD_KEY_ROW1__GPIO4_IO09 0x100b1 /* SS0# */ + MX6QDL_PAD_KEY_COL2__GPIO4_IO10 0x100b1 /* SS1# */ + MX6QDL_PAD_KEY_ROW2__GPIO4_IO11 0x100b1 /* SS2# */ + >; + }; + + pinctrl_ecspi2: ecspi2grp { + fsl,pins = < + MX6QDL_PAD_EIM_OE__ECSPI2_MISO 0x100b1 + MX6QDL_PAD_EIM_CS0__ECSPI2_SCLK 0x100b1 + MX6QDL_PAD_EIM_CS1__ECSPI2_MOSI 0x100b1 + MX6QDL_PAD_EIM_RW__GPIO2_IO26 0x100b1 /* SS0# */ + MX6QDL_PAD_EIM_LBA__GPIO2_IO27 0x100b1 /* SS1# */ + >; + }; + + pinctrl_ecspi4: ecspi4grp { + fsl,pins = < + MX6QDL_PAD_EIM_D21__ECSPI4_SCLK 0x100b1 + MX6QDL_PAD_EIM_D22__ECSPI4_MISO 0x100b1 + MX6QDL_PAD_EIM_D28__ECSPI4_MOSI 0x100b1 + MX6QDL_PAD_EIM_D29__GPIO3_IO29 0x100b1 /* SS0# */ + MX6QDL_PAD_EIM_A25__GPIO5_IO02 0x100b1 /* SS1# */ + MX6QDL_PAD_SD4_DAT7__GPIO2_IO15 0x1b0b0 /* WP pin */ + >; + }; + + pinctrl_enet: enetgrp { + fsl,pins = < + MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0 + MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0 + MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x1b0b0 + MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x1b0b0 + MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x1b0b0 + MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x1b0b0 + MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x1b0b0 + MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b0b0 + MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x1b0b0 + MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b0b0 + MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x1b0b0 + MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x1b0b0 + MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b0b0 + MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b0b0 + MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b0b0 + >; + }; + + pinctrl_flexcan1: flexcan1grp { + fsl,pins = < + MX6QDL_PAD_SD3_CLK__FLEXCAN1_RX 0x1b0b0 + MX6QDL_PAD_SD3_CMD__FLEXCAN1_TX 0x1b0b0 + >; + }; + + pinctrl_flexcan2: flexcan2grp { + fsl,pins = < + MX6QDL_PAD_SD3_DAT0__FLEXCAN2_TX 0x1b0b0 + MX6QDL_PAD_SD3_DAT1__FLEXCAN2_RX 0x1b0b0 + >; + }; + + pinctrl_gpio: gpiogrp { + fsl,pins = < + MX6QDL_PAD_ENET_CRS_DV__GPIO1_IO25 0x1b0b0 /* led enable */ + MX6QDL_PAD_NANDF_CS2__GPIO6_IO15 0x1b0b0 /* LCD power enable */ + MX6QDL_PAD_NANDF_CS3__GPIO6_IO16 0x1b0b0 /* led yellow */ + MX6QDL_PAD_EIM_EB0__GPIO2_IO28 0x1b0b0 /* led red */ + MX6QDL_PAD_EIM_A24__GPIO5_IO04 0x1b0b0 /* led green */ + MX6QDL_PAD_EIM_EB1__GPIO2_IO29 0x1b0b0 /* led blue */ + MX6QDL_PAD_SD3_DAT5__GPIO7_IO00 0x1b0b0 /* Profibus IRQ */ + MX6QDL_PAD_SD3_DAT6__GPIO6_IO18 0x1b0b0 /* FPGA IRQ */ + MX6QDL_PAD_EIM_A23__GPIO6_IO06 0x1b0b0 /* spi bus #2 SS driver enable */ + MX6QDL_PAD_GPIO_18__GPIO7_IO13 0x1b0b0 /* RST_LOC# PHY reset input (has pull-down!)*/ + MX6QDL_PAD_ENET_RX_ER__USB_OTG_ID 0x1b0b0 /* USB_OTG_ID = GPIO1_24*/ + MX6QDL_PAD_SD4_DAT1__GPIO2_IO09 0x1b0b0 /* Touchscreen IRQ */ + MX6QDL_PAD_EIM_A22__GPIO2_IO16 0x1b0b0 /* PCIe reset */ + >; + }; + + pinctrl_gpmi_nand: gpmi-nand { + fsl,pins = < + MX6QDL_PAD_NANDF_CLE__NAND_CLE 0xb0b1 + MX6QDL_PAD_NANDF_ALE__NAND_ALE 0xb0b1 + MX6QDL_PAD_NANDF_WP_B__NAND_WP_B 0xb0b1 + MX6QDL_PAD_NANDF_RB0__NAND_READY_B 0xb000 + MX6QDL_PAD_NANDF_CS0__NAND_CE0_B 0xb0b1 + MX6QDL_PAD_SD4_CMD__NAND_RE_B 0xb0b1 + MX6QDL_PAD_SD4_CLK__NAND_WE_B 0xb0b1 + MX6QDL_PAD_NANDF_D0__NAND_DATA00 0xb0b1 + MX6QDL_PAD_NANDF_D1__NAND_DATA01 0xb0b1 + MX6QDL_PAD_NANDF_D2__NAND_DATA02 0xb0b1 + MX6QDL_PAD_NANDF_D3__NAND_DATA03 0xb0b1 + MX6QDL_PAD_NANDF_D4__NAND_DATA04 0xb0b1 + MX6QDL_PAD_NANDF_D5__NAND_DATA05 0xb0b1 + MX6QDL_PAD_NANDF_D6__NAND_DATA06 0xb0b1 + MX6QDL_PAD_NANDF_D7__NAND_DATA07 0xb0b1 + >; + }; + + pinctrl_i2c1: i2c1grp { + fsl,pins = < + MX6QDL_PAD_CSI0_DAT8__I2C1_SDA 0x4001b8b1 + MX6QDL_PAD_CSI0_DAT9__I2C1_SCL 0x4001b8b1 + >; + }; + + pinctrl_i2c2: i2c2grp { + fsl,pins = < + MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1 + MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1 + >; + }; + + pinctrl_i2c3: i2c3grp { + fsl,pins = < + MX6QDL_PAD_GPIO_5__I2C3_SCL 0x4001b8b1 + MX6QDL_PAD_GPIO_6__I2C3_SDA 0x4001b8b1 + >; + }; + + pinctrl_i2c4: i2c4grp { + fsl,pins = < + MX6QDL_PAD_GPIO_7__I2C4_SCL 0x4001b8b1 + MX6QDL_PAD_GPIO_8__I2C4_SDA 0x4001b8b1 + >; + }; + + pinctrl_pwm1: pwm1grp { + fsl,pins = < + MX6QDL_PAD_GPIO_9__PWM1_OUT 0x1b0b0 + MX6QDL_PAD_EIM_BCLK__GPIO6_IO31 0x1b0b0 /* backlight enable */ + >; + }; + + pinctrl_uart1: uart1grp { + fsl,pins = < + MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA 0x1b0b1 + MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA 0x1b0b1 + MX6QDL_PAD_EIM_D20__UART1_RTS_B 0x1b0b1 + MX6QDL_PAD_EIM_D19__UART1_CTS_B 0x1b0b1 + >; + }; + + pinctrl_uart2: uart2grp { + fsl,pins = < + MX6QDL_PAD_EIM_D26__UART2_TX_DATA 0x1b0b1 + MX6QDL_PAD_EIM_D27__UART2_RX_DATA 0x1b0b1 + >; + }; + + pinctrl_uart3: uart3grp { + fsl,pins = < + MX6QDL_PAD_EIM_D24__UART3_TX_DATA 0x1b0b1 + MX6QDL_PAD_EIM_D25__UART3_RX_DATA 0x1b0b1 + MX6QDL_PAD_EIM_D31__UART3_RTS_B 0x1b0b1 + MX6QDL_PAD_EIM_D23__UART3_CTS_B 0x1b0b1 + >; + }; + + pinctrl_uart4: uart4grp { + fsl,pins = < + MX6QDL_PAD_KEY_COL0__UART4_TX_DATA 0x1b0b1 + MX6QDL_PAD_KEY_ROW0__UART4_RX_DATA 0x1b0b1 + >; + }; + + pinctrl_usbotg: usbotggrp { + fsl,pins = < + MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x17059 + >; + }; + + pinctrl_aristainetos2_usbh1_vbus: aristainetos-usbh1-vbus { + fsl,pins = <MX6QDL_PAD_GPIO_0__USB_H1_PWR 0x130b0>; + }; + + pinctrl_aristainetos2_usbotg_vbus: aristainetos-usbotg-vbus { + fsl,pins = <MX6QDL_PAD_KEY_ROW4__USB_OTG_PWR 0x130b0>; + }; + + pinctrl_usdhc1: usdhc1grp { + fsl,pins = < + MX6QDL_PAD_SD1_CMD__SD1_CMD 0x17059 + MX6QDL_PAD_SD1_CLK__SD1_CLK 0x10059 + MX6QDL_PAD_SD1_DAT0__SD1_DATA0 0x17059 + MX6QDL_PAD_SD1_DAT1__SD1_DATA1 0x17059 + MX6QDL_PAD_SD1_DAT2__SD1_DATA2 0x17059 + MX6QDL_PAD_SD1_DAT3__SD1_DATA3 0x17059 + MX6QDL_PAD_ENET_RXD0__GPIO1_IO27 0x1b0b0 /* SD1 card detect input */ + MX6QDL_PAD_DI0_PIN4__GPIO4_IO20 0x1b0b0 /* SD1 write protect input */ + >; + }; + + pinctrl_usdhc2: usdhc2grp { + fsl,pins = < + MX6QDL_PAD_SD2_CMD__SD2_CMD 0x71 + MX6QDL_PAD_SD2_CLK__SD2_CLK 0x71 + MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x71 + MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x71 + MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x71 + MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x71 + MX6QDL_PAD_SD3_RST__GPIO7_IO08 0x1b0b0 /* SD2 level shifter output enable */ + MX6QDL_PAD_GPIO_19__GPIO4_IO05 0x1b0b0 /* SD2 card detect input */ + MX6QDL_PAD_SD4_DAT2__GPIO2_IO10 0x1b0b0 /* SD2 write protect input */ + >; + }; +}; diff --git a/arch/arm/boot/dts/imx6qdl-cubox-i.dtsi b/arch/arm/boot/dts/imx6qdl-cubox-i.dtsi index d033bb182..ff41f8355 100644 --- a/arch/arm/boot/dts/imx6qdl-cubox-i.dtsi +++ b/arch/arm/boot/dts/imx6qdl-cubox-i.dtsi @@ -7,9 +7,8 @@ * whole. * * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License. + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. * * This file is distributed in the hope that it will be useful * but WITHOUT ANY WARRANTY; without even the implied warranty of @@ -259,6 +258,6 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_cubox_i_usdhc2_aux &pinctrl_cubox_i_usdhc2>; vmmc-supply = <®_3p3v>; - cd-gpios = <&gpio1 4 0>; + cd-gpios = <&gpio1 4 GPIO_ACTIVE_LOW>; status = "okay"; }; diff --git a/arch/arm/boot/dts/imx6qdl-dfi-fs700-m60.dtsi b/arch/arm/boot/dts/imx6qdl-dfi-fs700-m60.dtsi index 2c253d6d2..45e7c39e8 100644 --- a/arch/arm/boot/dts/imx6qdl-dfi-fs700-m60.dtsi +++ b/arch/arm/boot/dts/imx6qdl-dfi-fs700-m60.dtsi @@ -1,3 +1,5 @@ +#include <dt-bindings/gpio/gpio.h> + / { regulators { compatible = "simple-bus"; @@ -181,7 +183,7 @@ &usdhc2 { /* module slot */ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usdhc2>; - cd-gpios = <&gpio2 2 0>; + cd-gpios = <&gpio2 2 GPIO_ACTIVE_LOW>; status = "okay"; }; diff --git a/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi b/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi index b5756c21e..4493f6e99 100644 --- a/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi +++ b/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi @@ -318,7 +318,7 @@ &usdhc3 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usdhc3>; - cd-gpios = <&gpio7 0 GPIO_ACTIVE_HIGH>; + cd-gpios = <&gpio7 0 GPIO_ACTIVE_LOW>; vmmc-supply = <®_3p3v>; status = "okay"; }; diff --git a/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi b/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi index 86f03c1b1..a857d1294 100644 --- a/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi +++ b/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi @@ -324,7 +324,7 @@ &usdhc3 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usdhc3>; - cd-gpios = <&gpio7 0 GPIO_ACTIVE_HIGH>; + cd-gpios = <&gpio7 0 GPIO_ACTIVE_LOW>; vmmc-supply = <®_3p3v>; status = "okay"; }; diff --git a/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi b/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi index 4a8d97f47..1afe3385e 100644 --- a/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi +++ b/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi @@ -417,7 +417,7 @@ &usdhc3 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usdhc3>; - cd-gpios = <&gpio7 0 GPIO_ACTIVE_HIGH>; + cd-gpios = <&gpio7 0 GPIO_ACTIVE_LOW>; vmmc-supply = <®_3p3v>; status = "okay"; }; diff --git a/arch/arm/boot/dts/imx6qdl-gw551x.dtsi b/arch/arm/boot/dts/imx6qdl-gw551x.dtsi new file mode 100644 index 000000000..d1866a0a2 --- /dev/null +++ b/arch/arm/boot/dts/imx6qdl-gw551x.dtsi @@ -0,0 +1,314 @@ +/* + * Copyright 2014 Gateworks Corporation + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public + * License along with this file; if not, write to the Free + * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +#include <dt-bindings/gpio/gpio.h> + +/ { + /* these are used by bootloader for disabling nodes */ + aliases { + led0 = &led0; + nand = &gpmi; + ssi0 = &ssi1; + usb0 = &usbh1; + usb1 = &usbotg; + }; + + chosen { + bootargs = "console=ttymxc1,115200"; + }; + + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpio_leds>; + + led0: user1 { + label = "user1"; + gpios = <&gpio4 7 GPIO_ACTIVE_LOW>; + default-state = "on"; + linux,default-trigger = "heartbeat"; + }; + }; + + memory { + reg = <0x10000000 0x20000000>; + }; + + regulators { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <0>; + + reg_5p0v: regulator@0 { + compatible = "regulator-fixed"; + reg = <0>; + regulator-name = "5P0V"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + }; + + reg_usb_h1_vbus: regulator@1 { + compatible = "regulator-fixed"; + reg = <1>; + regulator-name = "usb_h1_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + }; + + reg_usb_otg_vbus: regulator@2 { + compatible = "regulator-fixed"; + reg = <2>; + regulator-name = "usb_otg_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + }; + }; +}; + +&can1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_flexcan1>; + status = "okay"; +}; + +&gpmi { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpmi_nand>; + status = "okay"; +}; + +&hdmi { + ddc-i2c-bus = <&i2c3>; + status = "okay"; +}; + +&i2c1 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c1>; + status = "okay"; + + eeprom1: eeprom@50 { + compatible = "atmel,24c02"; + reg = <0x50>; + pagesize = <16>; + }; + + eeprom2: eeprom@51 { + compatible = "atmel,24c02"; + reg = <0x51>; + pagesize = <16>; + }; + + eeprom3: eeprom@52 { + compatible = "atmel,24c02"; + reg = <0x52>; + pagesize = <16>; + }; + + eeprom4: eeprom@53 { + compatible = "atmel,24c02"; + reg = <0x53>; + pagesize = <16>; + }; + + gpio: pca9555@23 { + compatible = "nxp,pca9555"; + reg = <0x23>; + gpio-controller; + #gpio-cells = <2>; + }; + + rtc: ds1672@68 { + compatible = "dallas,ds1672"; + reg = <0x68>; + }; +}; + +&i2c2 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c2>; + status = "okay"; +}; + +&i2c3 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c3>; + status = "okay"; + + gpio_exp: pca9555@24 { + compatible = "nxp,pca9555"; + reg = <0x24>; + gpio-controller; + #gpio-cells = <2>; + }; + +}; + +&pcie { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pcie>; + reset-gpio = <&gpio1 0 GPIO_ACTIVE_LOW>; + status = "okay"; +}; + +&ssi1 { + status = "okay"; +}; + +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart2>; + status = "okay"; +}; + +&uart3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart3>; + status = "okay"; +}; + +&usbotg { + vbus-supply = <®_usb_otg_vbus>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbotg>; + disable-over-current; + status = "okay"; +}; + +&usbh1 { + vbus-supply = <®_usb_h1_vbus>; + status = "okay"; +}; + +&iomuxc { + imx6qdl-gw51xx { + pinctrl_flexcan1: flexcan1grp { + fsl,pins = < + MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX 0x1b0b1 + MX6QDL_PAD_KEY_COL2__FLEXCAN1_TX 0x1b0b1 + MX6QDL_PAD_GPIO_9__GPIO1_IO09 0x4001b0b0 /* CAN_STBY */ + >; + }; + + pinctrl_gpio_leds: gpioledsgrp { + fsl,pins = < + MX6QDL_PAD_KEY_ROW0__GPIO4_IO07 0x1b0b0 + >; + }; + + pinctrl_gpmi_nand: gpminandgrp { + fsl,pins = < + MX6QDL_PAD_NANDF_CLE__NAND_CLE 0xb0b1 + MX6QDL_PAD_NANDF_ALE__NAND_ALE 0xb0b1 + MX6QDL_PAD_NANDF_WP_B__NAND_WP_B 0xb0b1 + MX6QDL_PAD_NANDF_RB0__NAND_READY_B 0xb000 + MX6QDL_PAD_NANDF_CS0__NAND_CE0_B 0xb0b1 + MX6QDL_PAD_NANDF_CS1__NAND_CE1_B 0xb0b1 + MX6QDL_PAD_SD4_CMD__NAND_RE_B 0xb0b1 + MX6QDL_PAD_SD4_CLK__NAND_WE_B 0xb0b1 + MX6QDL_PAD_NANDF_D0__NAND_DATA00 0xb0b1 + MX6QDL_PAD_NANDF_D1__NAND_DATA01 0xb0b1 + MX6QDL_PAD_NANDF_D2__NAND_DATA02 0xb0b1 + MX6QDL_PAD_NANDF_D3__NAND_DATA03 0xb0b1 + MX6QDL_PAD_NANDF_D4__NAND_DATA04 0xb0b1 + MX6QDL_PAD_NANDF_D5__NAND_DATA05 0xb0b1 + MX6QDL_PAD_NANDF_D6__NAND_DATA06 0xb0b1 + MX6QDL_PAD_NANDF_D7__NAND_DATA07 0xb0b1 + >; + }; + + pinctrl_i2c1: i2c1grp { + fsl,pins = < + MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1 + MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1 + >; + }; + + pinctrl_i2c2: i2c2grp { + fsl,pins = < + MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1 + MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1 + >; + }; + + pinctrl_i2c3: i2c3grp { + fsl,pins = < + MX6QDL_PAD_GPIO_3__I2C3_SCL 0x4001b8b1 + MX6QDL_PAD_GPIO_6__I2C3_SDA 0x4001b8b1 + >; + }; + + pinctrl_pcie: pciegrp { + fsl,pins = < + MX6QDL_PAD_GPIO_0__GPIO1_IO00 0x1b0b0 /* PCIE RST */ + >; + }; + + pinctrl_uart2: uart2grp { + fsl,pins = < + MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA 0x1b0b1 + MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA 0x1b0b1 + >; + }; + + pinctrl_uart3: uart3grp { + fsl,pins = < + MX6QDL_PAD_EIM_D24__UART3_TX_DATA 0x1b0b1 + MX6QDL_PAD_EIM_D25__UART3_RX_DATA 0x1b0b1 + >; + }; + + pinctrl_usbotg: usbotggrp { + fsl,pins = < + MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x17059 + >; + }; + }; +}; diff --git a/arch/arm/boot/dts/imx6qdl-hummingboard.dtsi b/arch/arm/boot/dts/imx6qdl-hummingboard.dtsi index 151a3db2a..6dd0b764e 100644 --- a/arch/arm/boot/dts/imx6qdl-hummingboard.dtsi +++ b/arch/arm/boot/dts/imx6qdl-hummingboard.dtsi @@ -7,9 +7,8 @@ * whole. * * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License. + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. * * This file is distributed in the hope that it will be useful * but WITHOUT ANY WARRANTY; without even the implied warranty of @@ -192,6 +191,12 @@ >; }; + pinctrl_hummingboard_pcie_reset: hummingboard-pcie-reset { + fsl,pins = < + MX6QDL_PAD_EIM_DA4__GPIO3_IO04 0x1b0b1 + >; + }; + pinctrl_hummingboard_pwm1: pwm1grp { fsl,pins = <MX6QDL_PAD_DISP0_DAT8__PWM1_OUT 0x1b0b1>; }; @@ -245,6 +250,13 @@ }; }; +&pcie { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_hummingboard_pcie_reset>; + reset-gpio = <&gpio3 4 0>; + status = "okay"; +}; + &pwm1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_hummingboard_pwm1>; @@ -263,7 +275,6 @@ }; &ssi1 { - fsl,mode = "i2s-slave"; status = "okay"; }; @@ -288,6 +299,6 @@ &pinctrl_hummingboard_usdhc2 >; vmmc-supply = <®_3p3v>; - cd-gpios = <&gpio1 4 0>; + cd-gpios = <&gpio1 4 GPIO_ACTIVE_LOW>; status = "okay"; }; diff --git a/arch/arm/boot/dts/imx6qdl-microsom-ar8035.dtsi b/arch/arm/boot/dts/imx6qdl-microsom-ar8035.dtsi index 4a1820309..469ef58ce 100644 --- a/arch/arm/boot/dts/imx6qdl-microsom-ar8035.dtsi +++ b/arch/arm/boot/dts/imx6qdl-microsom-ar8035.dtsi @@ -10,9 +10,8 @@ * whole. * * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License. + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. * * This file is distributed in the hope that it will be useful * but WITHOUT ANY WARRANTY; without even the implied warranty of diff --git a/arch/arm/boot/dts/imx6qdl-microsom.dtsi b/arch/arm/boot/dts/imx6qdl-microsom.dtsi index 349f82be8..6d4069cc9 100644 --- a/arch/arm/boot/dts/imx6qdl-microsom.dtsi +++ b/arch/arm/boot/dts/imx6qdl-microsom.dtsi @@ -7,9 +7,8 @@ * whole. * * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License. + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. * * This file is distributed in the hope that it will be useful * but WITHOUT ANY WARRANTY; without even the implied warranty of @@ -39,15 +38,98 @@ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR * OTHER DEALINGS IN THE SOFTWARE. */ +#include <dt-bindings/gpio/gpio.h> +/ { + clk_sdio: sdio-clock { + compatible = "gpio-gate-clock"; + #clock-cells = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_microsom_brcm_osc>; + enable-gpios = <&gpio5 5 GPIO_ACTIVE_HIGH>; + }; + + regulators { + compatible = "simple-bus"; + + reg_brcm: brcm-reg { + compatible = "regulator-fixed"; + enable-active-high; + gpio = <&gpio3 19 0>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_microsom_brcm_reg>; + regulator-name = "brcm_reg"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + startup-delay-us = <200000>; + }; + }; + + usdhc1_pwrseq: usdhc1_pwrseq { + compatible = "mmc-pwrseq-simple"; + reset-gpios = <&gpio5 26 GPIO_ACTIVE_LOW>, + <&gpio6 0 GPIO_ACTIVE_LOW>; + clocks = <&clk_sdio>; + clock-names = "ext_clock"; + }; +}; &iomuxc { microsom { + pinctrl_microsom_brcm_bt: microsom-brcm-bt { + fsl,pins = < + MX6QDL_PAD_CSI0_DAT14__GPIO6_IO00 0x40013070 + MX6QDL_PAD_CSI0_DAT15__GPIO6_IO01 0x40013070 + MX6QDL_PAD_CSI0_DAT18__GPIO6_IO04 0x40013070 + >; + }; + + pinctrl_microsom_brcm_osc: microsom-brcm-osc { + fsl,pins = < + MX6QDL_PAD_DISP0_DAT11__GPIO5_IO05 0x40013070 + >; + }; + + pinctrl_microsom_brcm_reg: microsom-brcm-reg { + fsl,pins = < + MX6QDL_PAD_EIM_D19__GPIO3_IO19 0x40013070 + >; + }; + + pinctrl_microsom_brcm_wifi: microsom-brcm-wifi { + fsl,pins = < + MX6QDL_PAD_GPIO_8__XTALOSC_REF_CLK_32K 0x1b0b0 + MX6QDL_PAD_CSI0_DATA_EN__GPIO5_IO20 0x40013070 + MX6QDL_PAD_CSI0_DAT8__GPIO5_IO26 0x40013070 + MX6QDL_PAD_CSI0_DAT9__GPIO5_IO27 0x40013070 + >; + }; + pinctrl_microsom_uart1: microsom-uart1 { fsl,pins = < MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA 0x1b0b1 MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA 0x1b0b1 >; }; + + pinctrl_microsom_uart4: microsom-uart4 { + fsl,pins = < + MX6QDL_PAD_CSI0_DAT12__UART4_TX_DATA 0x1b0b1 + MX6QDL_PAD_CSI0_DAT13__UART4_RX_DATA 0x1b0b1 + MX6QDL_PAD_CSI0_DAT16__UART4_RTS_B 0x1b0b1 + MX6QDL_PAD_CSI0_DAT17__UART4_CTS_B 0x1b0b1 + >; + }; + + pinctrl_microsom_usdhc1: microsom-usdhc1 { + fsl,pins = < + MX6QDL_PAD_SD1_CMD__SD1_CMD 0x17059 + MX6QDL_PAD_SD1_CLK__SD1_CLK 0x10059 + MX6QDL_PAD_SD1_DAT0__SD1_DATA0 0x17059 + MX6QDL_PAD_SD1_DAT1__SD1_DATA1 0x17059 + MX6QDL_PAD_SD1_DAT2__SD1_DATA2 0x17059 + MX6QDL_PAD_SD1_DAT3__SD1_DATA3 0x17059 + >; + }; }; }; @@ -56,3 +138,23 @@ pinctrl-0 = <&pinctrl_microsom_uart1>; status = "okay"; }; + +/* UART4 - Connected to optional BRCM Wifi/BT/FM */ +&uart4 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_microsom_brcm_bt &pinctrl_microsom_uart4>; + fsl,uart-has-rtscts; + status = "okay"; +}; + +/* USDHC1 - Connected to optional BRCM Wifi/BT/FM */ +&usdhc1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_microsom_brcm_wifi &pinctrl_microsom_usdhc1>; + bus-width = <4>; + mmc-pwrseq = <&usdhc1_pwrseq>; + keep-power-in-suspend; + non-removable; + vmmc-supply = <®_brcm>; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi b/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi index 08218120e..d7fe6672d 100644 --- a/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi +++ b/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi @@ -122,7 +122,7 @@ status = "okay"; }; - backlight_lvds { + backlight_lvds: backlight_lvds { compatible = "pwm-backlight"; pwms = <&pwm4 0 5000000>; brightness-levels = <0 4 8 16 32 64 128 255>; @@ -130,6 +130,17 @@ power-supply = <®_3p3v>; status = "okay"; }; + + panel { + compatible = "hannstar,hsd100pxn1"; + backlight = <&backlight_lvds>; + + port { + panel_in: endpoint { + remote-endpoint = <&lvds0_out>; + }; + }; + }; }; &audmux { @@ -379,18 +390,11 @@ fsl,data-width = <18>; status = "okay"; - display-timings { - native-mode = <&timing0>; - timing0: hsd100pxn1 { - clock-frequency = <65000000>; - hactive = <1024>; - vactive = <768>; - hback-porch = <220>; - hfront-porch = <40>; - vback-porch = <21>; - vfront-porch = <7>; - hsync-len = <60>; - vsync-len = <10>; + port@4 { + reg = <4>; + + lvds0_out: endpoint { + remote-endpoint = <&panel_in>; }; }; }; @@ -449,7 +453,7 @@ &usdhc3 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usdhc3>; - cd-gpios = <&gpio7 0 0>; + cd-gpios = <&gpio7 0 GPIO_ACTIVE_LOW>; vmmc-supply = <®_3p3v>; status = "okay"; }; @@ -457,7 +461,7 @@ &usdhc4 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usdhc4>; - cd-gpios = <&gpio2 6 0>; + cd-gpios = <&gpio2 6 GPIO_ACTIVE_LOW>; vmmc-supply = <®_3p3v>; status = "okay"; }; diff --git a/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi b/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi index 1ce6133b6..9e6ecd99b 100644 --- a/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi +++ b/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi @@ -409,8 +409,8 @@ &usdhc2 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usdhc2>; - cd-gpios = <&gpio1 4 0>; - wp-gpios = <&gpio1 2 0>; + cd-gpios = <&gpio1 4 GPIO_ACTIVE_LOW>; + wp-gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>; status = "disabled"; }; @@ -418,7 +418,7 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usdhc3 &pinctrl_usdhc3_cdwp>; - cd-gpios = <&gpio1 27 0>; - wp-gpios = <&gpio1 29 0>; + cd-gpios = <&gpio1 27 GPIO_ACTIVE_LOW>; + wp-gpios = <&gpio1 29 GPIO_ACTIVE_HIGH>; status = "disabled"; }; diff --git a/arch/arm/boot/dts/imx6qdl-rex.dtsi b/arch/arm/boot/dts/imx6qdl-rex.dtsi index 488a64079..3373fd958 100644 --- a/arch/arm/boot/dts/imx6qdl-rex.dtsi +++ b/arch/arm/boot/dts/imx6qdl-rex.dtsi @@ -342,7 +342,7 @@ pinctrl-0 = <&pinctrl_usdhc2>; bus-width = <4>; cd-gpios = <&gpio2 2 GPIO_ACTIVE_LOW>; - wp-gpios = <&gpio2 3 GPIO_ACTIVE_LOW>; + wp-gpios = <&gpio2 3 GPIO_ACTIVE_HIGH>; status = "okay"; }; @@ -351,6 +351,6 @@ pinctrl-0 = <&pinctrl_usdhc3>; bus-width = <4>; cd-gpios = <&gpio2 0 GPIO_ACTIVE_LOW>; - wp-gpios = <&gpio2 1 GPIO_ACTIVE_LOW>; + wp-gpios = <&gpio2 1 GPIO_ACTIVE_HIGH>; status = "okay"; }; diff --git a/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi b/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi index 3b24b1265..e329ca5c3 100644 --- a/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi +++ b/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi @@ -467,8 +467,8 @@ pinctrl-0 = <&pinctrl_usdhc3>; pinctrl-1 = <&pinctrl_usdhc3_100mhz>; pinctrl-2 = <&pinctrl_usdhc3_200mhz>; - cd-gpios = <&gpio6 15 0>; - wp-gpios = <&gpio1 13 0>; + cd-gpios = <&gpio6 15 GPIO_ACTIVE_LOW>; + wp-gpios = <&gpio1 13 GPIO_ACTIVE_HIGH>; status = "okay"; }; diff --git a/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi b/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi index 0b28a9d52..782379320 100644 --- a/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi +++ b/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi @@ -121,7 +121,7 @@ status = "okay"; }; - backlight_lvds { + backlight_lvds: backlight_lvds { compatible = "pwm-backlight"; pwms = <&pwm4 0 5000000>; brightness-levels = <0 4 8 16 32 64 128 255>; @@ -129,6 +129,17 @@ power-supply = <®_3p3v>; status = "okay"; }; + + panel { + compatible = "hannstar,hsd100pxn1"; + backlight = <&backlight_lvds>; + + port { + panel_in: endpoint { + remote-endpoint = <&lvds0_out>; + }; + }; + }; }; &audmux { @@ -374,18 +385,11 @@ fsl,data-width = <18>; status = "okay"; - display-timings { - native-mode = <&timing0>; - timing0: hsd100pxn1 { - clock-frequency = <65000000>; - hactive = <1024>; - vactive = <768>; - hback-porch = <220>; - hfront-porch = <40>; - vback-porch = <21>; - vfront-porch = <7>; - hsync-len = <60>; - vsync-len = <10>; + port@4 { + reg = <4>; + + lvds0_out: endpoint { + remote-endpoint = <&panel_in>; }; }; }; @@ -444,8 +448,8 @@ &usdhc3 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usdhc3>; - cd-gpios = <&gpio7 0 0>; - wp-gpios = <&gpio7 1 0>; + cd-gpios = <&gpio7 0 GPIO_ACTIVE_LOW>; + wp-gpios = <&gpio7 1 GPIO_ACTIVE_HIGH>; vmmc-supply = <®_3p3v>; status = "okay"; }; @@ -453,7 +457,7 @@ &usdhc4 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usdhc4>; - cd-gpios = <&gpio2 6 0>; + cd-gpios = <&gpio2 6 GPIO_ACTIVE_LOW>; vmmc-supply = <®_3p3v>; status = "okay"; }; diff --git a/arch/arm/boot/dts/imx6qdl-sabresd.dtsi b/arch/arm/boot/dts/imx6qdl-sabresd.dtsi index a626e6dd8..944eb81cb 100644 --- a/arch/arm/boot/dts/imx6qdl-sabresd.dtsi +++ b/arch/arm/boot/dts/imx6qdl-sabresd.dtsi @@ -562,8 +562,8 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usdhc2>; bus-width = <8>; - cd-gpios = <&gpio2 2 0>; - wp-gpios = <&gpio2 3 0>; + cd-gpios = <&gpio2 2 GPIO_ACTIVE_LOW>; + wp-gpios = <&gpio2 3 GPIO_ACTIVE_HIGH>; status = "okay"; }; @@ -571,8 +571,8 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usdhc3>; bus-width = <8>; - cd-gpios = <&gpio2 0 0>; - wp-gpios = <&gpio2 1 0>; + cd-gpios = <&gpio2 0 GPIO_ACTIVE_LOW>; + wp-gpios = <&gpio2 1 GPIO_ACTIVE_HIGH>; status = "okay"; }; diff --git a/arch/arm/boot/dts/imx6qdl-tx6.dtsi b/arch/arm/boot/dts/imx6qdl-tx6.dtsi index f02b80b41..da08de324 100644 --- a/arch/arm/boot/dts/imx6qdl-tx6.dtsi +++ b/arch/arm/boot/dts/imx6qdl-tx6.dtsi @@ -680,7 +680,7 @@ pinctrl-0 = <&pinctrl_usdhc1>; bus-width = <4>; no-1-8-v; - cd-gpios = <&gpio7 2 0>; + cd-gpios = <&gpio7 2 GPIO_ACTIVE_LOW>; fsl,wp-controller; status = "okay"; }; @@ -690,7 +690,7 @@ pinctrl-0 = <&pinctrl_usdhc2>; bus-width = <4>; no-1-8-v; - cd-gpios = <&gpio7 3 0>; + cd-gpios = <&gpio7 3 GPIO_ACTIVE_LOW>; fsl,wp-controller; status = "okay"; }; diff --git a/arch/arm/boot/dts/imx6qdl-wandboard.dtsi b/arch/arm/boot/dts/imx6qdl-wandboard.dtsi index 5fb091675..9e096d811 100644 --- a/arch/arm/boot/dts/imx6qdl-wandboard.dtsi +++ b/arch/arm/boot/dts/imx6qdl-wandboard.dtsi @@ -9,6 +9,8 @@ * */ +#include <dt-bindings/gpio/gpio.h> + / { regulators { compatible = "simple-bus"; @@ -250,13 +252,13 @@ &usdhc1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usdhc1>; - cd-gpios = <&gpio1 2 0>; + cd-gpios = <&gpio1 2 GPIO_ACTIVE_LOW>; status = "okay"; }; &usdhc3 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usdhc3>; - cd-gpios = <&gpio3 9 0>; + cd-gpios = <&gpio3 9 GPIO_ACTIVE_LOW>; status = "okay"; }; diff --git a/arch/arm/boot/dts/imx6qdl.dtsi b/arch/arm/boot/dts/imx6qdl.dtsi index 2d89a7be7..72ae58922 100644 --- a/arch/arm/boot/dts/imx6qdl.dtsi +++ b/arch/arm/boot/dts/imx6qdl.dtsi @@ -119,6 +119,34 @@ status = "disabled"; }; + hdmi: hdmi@0120000 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x00120000 0x9000>; + interrupts = <0 115 0x04>; + gpr = <&gpr>; + clocks = <&clks IMX6QDL_CLK_HDMI_IAHB>, + <&clks IMX6QDL_CLK_HDMI_ISFR>; + clock-names = "iahb", "isfr"; + status = "disabled"; + + port@0 { + reg = <0>; + + hdmi_mux_0: endpoint { + remote-endpoint = <&ipu1_di0_hdmi>; + }; + }; + + port@1 { + reg = <1>; + + hdmi_mux_1: endpoint { + remote-endpoint = <&ipu1_di1_hdmi>; + }; + }; + }; + timer@00a00600 { compatible = "arm,cortex-a9-twd-timer"; reg = <0x00a00600 0x20>; @@ -153,10 +181,10 @@ interrupt-names = "msi"; #interrupt-cells = <1>; interrupt-map-mask = <0 0 0 0x7>; - interrupt-map = <0 0 0 1 &intc GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>, - <0 0 0 2 &intc GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>, - <0 0 0 3 &intc GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>, - <0 0 0 4 &intc GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>; + interrupt-map = <0 0 0 1 &gpc GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>, + <0 0 0 2 &gpc GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>, + <0 0 0 3 &gpc GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>, + <0 0 0 4 &gpc GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clks IMX6QDL_CLK_PCIE_AXI>, <&clks IMX6QDL_CLK_LVDS1_GATE>, <&clks IMX6QDL_CLK_PCIE_REF_125M>; @@ -343,6 +371,7 @@ clocks = <&clks IMX6QDL_CLK_VPU_AXI>, <&clks IMX6QDL_CLK_MMDC_CH0_AXI>; clock-names = "per", "ahb"; + power-domains = <&gpc 1>; resets = <&src 1>; iram = <&ocram>; }; @@ -778,34 +807,6 @@ }; }; - hdmi: hdmi@0120000 { - #address-cells = <1>; - #size-cells = <0>; - reg = <0x00120000 0x9000>; - interrupts = <0 115 0x04>; - gpr = <&gpr>; - clocks = <&clks IMX6QDL_CLK_HDMI_IAHB>, - <&clks IMX6QDL_CLK_HDMI_ISFR>; - clock-names = "iahb", "isfr"; - status = "disabled"; - - port@0 { - reg = <0>; - - hdmi_mux_0: endpoint { - remote-endpoint = <&ipu1_di0_hdmi>; - }; - }; - - port@1 { - reg = <1>; - - hdmi_mux_1: endpoint { - remote-endpoint = <&ipu1_di1_hdmi>; - }; - }; - }; - dcic1: dcic@020e4000 { reg = <0x020e4000 0x4000>; interrupts = <0 124 IRQ_TYPE_LEVEL_HIGH>; diff --git a/arch/arm/boot/dts/imx6sl-evk.dts b/arch/arm/boot/dts/imx6sl-evk.dts index 945887d3f..b84dff2e9 100644 --- a/arch/arm/boot/dts/imx6sl-evk.dts +++ b/arch/arm/boot/dts/imx6sl-evk.dts @@ -617,8 +617,8 @@ pinctrl-1 = <&pinctrl_usdhc1_100mhz>; pinctrl-2 = <&pinctrl_usdhc1_200mhz>; bus-width = <8>; - cd-gpios = <&gpio4 7 0>; - wp-gpios = <&gpio4 6 0>; + cd-gpios = <&gpio4 7 GPIO_ACTIVE_LOW>; + wp-gpios = <&gpio4 6 GPIO_ACTIVE_HIGH>; status = "okay"; }; @@ -627,8 +627,8 @@ pinctrl-0 = <&pinctrl_usdhc2>; pinctrl-1 = <&pinctrl_usdhc2_100mhz>; pinctrl-2 = <&pinctrl_usdhc2_200mhz>; - cd-gpios = <&gpio5 0 0>; - wp-gpios = <&gpio4 29 0>; + cd-gpios = <&gpio5 0 GPIO_ACTIVE_LOW>; + wp-gpios = <&gpio4 29 GPIO_ACTIVE_HIGH>; status = "okay"; }; @@ -637,6 +637,6 @@ pinctrl-0 = <&pinctrl_usdhc3>; pinctrl-1 = <&pinctrl_usdhc3_100mhz>; pinctrl-2 = <&pinctrl_usdhc3_200mhz>; - cd-gpios = <&gpio3 22 0>; + cd-gpios = <&gpio3 22 GPIO_ACTIVE_LOW>; status = "okay"; }; diff --git a/arch/arm/boot/dts/imx6sl-warp.dts b/arch/arm/boot/dts/imx6sl-warp.dts index 64f7decf1..0da906bd8 100644 --- a/arch/arm/boot/dts/imx6sl-warp.dts +++ b/arch/arm/boot/dts/imx6sl-warp.dts @@ -58,40 +58,6 @@ reg = <0x80000000 0x20000000>; }; - regulators { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <0>; - - reg_usb_otg1_vbus: regulator@0 { - compatible = "regulator-fixed"; - reg = <0>; - regulator-name = "usb_otg1_vbus"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - gpio = <&gpio4 0 0>; - enable-active-high; - }; - - reg_usb_otg2_vbus: regulator@1 { - compatible = "regulator-fixed"; - reg = <1>; - regulator-name = "usb_otg2_vbus"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - gpio = <&gpio4 2 0>; - enable-active-high; - }; - - reg_1p8v: regulator@2 { - compatible = "regulator-fixed"; - reg = <2>; - regulator-name = "1P8V"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - }; - usdhc3_pwrseq: usdhc3_pwrseq { compatible = "mmc-pwrseq-simple"; reset-gpios = <&gpio4 5 GPIO_ACTIVE_LOW>, /* WL_REG_ON */ @@ -121,14 +87,13 @@ }; &usbotg1 { - vbus-supply = <®_usb_otg1_vbus>; - dr_mode = "host"; + dr_mode = "peripheral"; disable-over-current; status = "okay"; }; &usbotg2 { - vbus-supply = <®_usb_otg2_vbus>; + dr_mode = "host"; disable-over-current; status = "okay"; }; diff --git a/arch/arm/boot/dts/imx6sx-sabreauto.dts b/arch/arm/boot/dts/imx6sx-sabreauto.dts index e3c0b63c2..115f3fd78 100644 --- a/arch/arm/boot/dts/imx6sx-sabreauto.dts +++ b/arch/arm/boot/dts/imx6sx-sabreauto.dts @@ -49,7 +49,7 @@ pinctrl-1 = <&pinctrl_usdhc3_100mhz>; pinctrl-2 = <&pinctrl_usdhc3_200mhz>; bus-width = <8>; - cd-gpios = <&gpio7 10 GPIO_ACTIVE_HIGH>; + cd-gpios = <&gpio7 10 GPIO_ACTIVE_LOW>; wp-gpios = <&gpio3 19 GPIO_ACTIVE_HIGH>; keep-power-in-suspend; enable-sdio-wakeup; @@ -61,7 +61,7 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usdhc4>; bus-width = <8>; - cd-gpios = <&gpio7 11 GPIO_ACTIVE_HIGH>; + cd-gpios = <&gpio7 11 GPIO_ACTIVE_LOW>; no-1-8-v; keep-power-in-suspend; enable-sdio-wakup; diff --git a/arch/arm/boot/dts/imx6sx-sdb.dtsi b/arch/arm/boot/dts/imx6sx-sdb.dtsi index cef04cef3..ac88c3467 100644 --- a/arch/arm/boot/dts/imx6sx-sdb.dtsi +++ b/arch/arm/boot/dts/imx6sx-sdb.dtsi @@ -293,7 +293,7 @@ pinctrl-1 = <&pinctrl_usdhc3_100mhz>; pinctrl-2 = <&pinctrl_usdhc3_200mhz>; bus-width = <8>; - cd-gpios = <&gpio2 10 GPIO_ACTIVE_HIGH>; + cd-gpios = <&gpio2 10 GPIO_ACTIVE_LOW>; wp-gpios = <&gpio2 15 GPIO_ACTIVE_HIGH>; keep-power-in-suspend; enable-sdio-wakeup; @@ -304,7 +304,7 @@ &usdhc4 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usdhc4>; - cd-gpios = <&gpio6 21 GPIO_ACTIVE_HIGH>; + cd-gpios = <&gpio6 21 GPIO_ACTIVE_LOW>; wp-gpios = <&gpio6 20 GPIO_ACTIVE_HIGH>; status = "okay"; }; diff --git a/arch/arm/boot/dts/imx7d-pinfunc.h b/arch/arm/boot/dts/imx7d-pinfunc.h new file mode 100644 index 000000000..a8d81497e --- /dev/null +++ b/arch/arm/boot/dts/imx7d-pinfunc.h @@ -0,0 +1,1038 @@ +/* + * Copyright (C) 2014-2015 Freescale Semiconductor, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ + +#ifndef __DTS_IMX7D_PINFUNC_H +#define __DTS_IMX7D_PINFUNC_H + +/* + * The pin function ID is a tuple of + * <mux_reg conf_reg input_reg mux_mode input_val> + */ + +#define MX7D_PAD_EPDC_DATA00__EPDC_DATA0 0x0034 0x02A4 0x0000 0x0 0x0 +#define MX7D_PAD_EPDC_DATA00__SIM1_PORT2_TRXD 0x0034 0x02A4 0x0000 0x1 0x0 +#define MX7D_PAD_EPDC_DATA00__QSPI_A_DATA0 0x0034 0x02A4 0x0000 0x2 0x0 +#define MX7D_PAD_EPDC_DATA00__KPP_ROW3 0x0034 0x02A4 0x0620 0x3 0x0 +#define MX7D_PAD_EPDC_DATA00__EIM_AD0 0x0034 0x02A4 0x0000 0x4 0x0 +#define MX7D_PAD_EPDC_DATA00__GPIO2_IO0 0x0034 0x02A4 0x0000 0x5 0x0 +#define MX7D_PAD_EPDC_DATA00__LCD_DATA0 0x0034 0x02A4 0x0638 0x6 0x0 +#define MX7D_PAD_EPDC_DATA00__LCD_CLK 0x0034 0x02A4 0x0000 0x7 0x0 +#define MX7D_PAD_EPDC_DATA01__EPDC_DATA1 0x0038 0x02A8 0x0000 0x0 0x0 +#define MX7D_PAD_EPDC_DATA01__SIM1_PORT2_CLK 0x0038 0x02A8 0x0000 0x1 0x0 +#define MX7D_PAD_EPDC_DATA01__QSPI_A_DATA1 0x0038 0x02A8 0x0000 0x2 0x0 +#define MX7D_PAD_EPDC_DATA01__KPP_COL3 0x0038 0x02A8 0x0600 0x3 0x0 +#define MX7D_PAD_EPDC_DATA01__EIM_AD1 0x0038 0x02A8 0x0000 0x4 0x0 +#define MX7D_PAD_EPDC_DATA01__GPIO2_IO1 0x0038 0x02A8 0x0000 0x5 0x0 +#define MX7D_PAD_EPDC_DATA01__LCD_DATA1 0x0038 0x02A8 0x063C 0x6 0x0 +#define MX7D_PAD_EPDC_DATA01__LCD_ENABLE 0x0038 0x02A8 0x0000 0x7 0x0 +#define MX7D_PAD_EPDC_DATA02__EPDC_DATA2 0x003C 0x02AC 0x0000 0x0 0x0 +#define MX7D_PAD_EPDC_DATA02__SIM1_PORT2_RST_B 0x003C 0x02AC 0x0000 0x1 0x0 +#define MX7D_PAD_EPDC_DATA02__QSPI_A_DATA2 0x003C 0x02AC 0x0000 0x2 0x0 +#define MX7D_PAD_EPDC_DATA02__KPP_ROW2 0x003C 0x02AC 0x061C 0x3 0x0 +#define MX7D_PAD_EPDC_DATA02__EIM_AD2 0x003C 0x02AC 0x0000 0x4 0x0 +#define MX7D_PAD_EPDC_DATA02__GPIO2_IO2 0x003C 0x02AC 0x0000 0x5 0x0 +#define MX7D_PAD_EPDC_DATA02__LCD_DATA2 0x003C 0x02AC 0x0640 0x6 0x0 +#define MX7D_PAD_EPDC_DATA02__LCD_VSYNC 0x003C 0x02AC 0x0698 0x7 0x0 +#define MX7D_PAD_EPDC_DATA03__EPDC_DATA3 0x0040 0x02B0 0x0000 0x0 0x0 +#define MX7D_PAD_EPDC_DATA03__SIM1_PORT2_SVEN 0x0040 0x02B0 0x0000 0x1 0x0 +#define MX7D_PAD_EPDC_DATA03__QSPI_A_DATA3 0x0040 0x02B0 0x0000 0x2 0x0 +#define MX7D_PAD_EPDC_DATA03__KPP_COL2 0x0040 0x02B0 0x05FC 0x3 0x0 +#define MX7D_PAD_EPDC_DATA03__EIM_AD3 0x0040 0x02B0 0x0000 0x4 0x0 +#define MX7D_PAD_EPDC_DATA03__GPIO2_IO3 0x0040 0x02B0 0x0000 0x5 0x0 +#define MX7D_PAD_EPDC_DATA03__LCD_DATA3 0x0040 0x02B0 0x0644 0x6 0x0 +#define MX7D_PAD_EPDC_DATA03__LCD_HSYNC 0x0040 0x02B0 0x0000 0x7 0x0 +#define MX7D_PAD_EPDC_DATA04__EPDC_DATA4 0x0044 0x02B4 0x0000 0x0 0x0 +#define MX7D_PAD_EPDC_DATA04__SIM1_PORT2_PD 0x0044 0x02B4 0x0000 0x1 0x0 +#define MX7D_PAD_EPDC_DATA04__QSPI_A_DQS 0x0044 0x02B4 0x0000 0x2 0x0 +#define MX7D_PAD_EPDC_DATA04__KPP_ROW1 0x0044 0x02B4 0x0618 0x3 0x0 +#define MX7D_PAD_EPDC_DATA04__EIM_AD4 0x0044 0x02B4 0x0000 0x4 0x0 +#define MX7D_PAD_EPDC_DATA04__GPIO2_IO4 0x0044 0x02B4 0x0000 0x5 0x0 +#define MX7D_PAD_EPDC_DATA04__LCD_DATA4 0x0044 0x02B4 0x0648 0x6 0x0 +#define MX7D_PAD_EPDC_DATA04__JTAG_FAIL 0x0044 0x02B4 0x0000 0x7 0x0 +#define MX7D_PAD_EPDC_DATA05__EPDC_DATA5 0x0048 0x02B8 0x0000 0x0 0x0 +#define MX7D_PAD_EPDC_DATA05__SIM2_PORT2_TRXD 0x0048 0x02B8 0x0000 0x1 0x0 +#define MX7D_PAD_EPDC_DATA05__QSPI_A_SCLK 0x0048 0x02B8 0x0000 0x2 0x0 +#define MX7D_PAD_EPDC_DATA05__KPP_COL1 0x0048 0x02B8 0x05F8 0x3 0x0 +#define MX7D_PAD_EPDC_DATA05__EIM_AD5 0x0048 0x02B8 0x0000 0x4 0x0 +#define MX7D_PAD_EPDC_DATA05__GPIO2_IO5 0x0048 0x02B8 0x0000 0x5 0x0 +#define MX7D_PAD_EPDC_DATA05__LCD_DATA5 0x0048 0x02B8 0x064C 0x6 0x0 +#define MX7D_PAD_EPDC_DATA05__JTAG_ACTIVE 0x0048 0x02B8 0x0000 0x7 0x0 +#define MX7D_PAD_EPDC_DATA06__EPDC_DATA6 0x004C 0x02BC 0x0000 0x0 0x0 +#define MX7D_PAD_EPDC_DATA06__SIM2_PORT2_CLK 0x004C 0x02BC 0x0000 0x1 0x0 +#define MX7D_PAD_EPDC_DATA06__QSPI_A_SS0_B 0x004C 0x02BC 0x0000 0x2 0x0 +#define MX7D_PAD_EPDC_DATA06__KPP_ROW0 0x004C 0x02BC 0x0614 0x3 0x0 +#define MX7D_PAD_EPDC_DATA06__EIM_AD6 0x004C 0x02BC 0x0000 0x4 0x0 +#define MX7D_PAD_EPDC_DATA06__GPIO2_IO6 0x004C 0x02BC 0x0000 0x5 0x0 +#define MX7D_PAD_EPDC_DATA06__LCD_DATA6 0x004C 0x02BC 0x0650 0x6 0x0 +#define MX7D_PAD_EPDC_DATA06__JTAG_DE_B 0x004C 0x02BC 0x0000 0x7 0x0 +#define MX7D_PAD_EPDC_DATA07__EPDC_DATA7 0x0050 0x02C0 0x0000 0x0 0x0 +#define MX7D_PAD_EPDC_DATA07__SIM2_PORT2_RST_B 0x0050 0x02C0 0x0000 0x1 0x0 +#define MX7D_PAD_EPDC_DATA07__QSPI_A_SS1_B 0x0050 0x02C0 0x0000 0x2 0x0 +#define MX7D_PAD_EPDC_DATA07__KPP_COL0 0x0050 0x02C0 0x05F4 0x3 0x0 +#define MX7D_PAD_EPDC_DATA07__EIM_AD7 0x0050 0x02C0 0x0000 0x4 0x0 +#define MX7D_PAD_EPDC_DATA07__GPIO2_IO7 0x0050 0x02C0 0x0000 0x5 0x0 +#define MX7D_PAD_EPDC_DATA07__LCD_DATA7 0x0050 0x02C0 0x0654 0x6 0x0 +#define MX7D_PAD_EPDC_DATA07__JTAG_DONE 0x0050 0x02C0 0x0000 0x7 0x0 +#define MX7D_PAD_EPDC_DATA08__EPDC_DATA8 0x0054 0x02C4 0x0000 0x0 0x0 +#define MX7D_PAD_EPDC_DATA08__SIM1_PORT1_TRXD 0x0054 0x02C4 0x06E4 0x1 0x0 +#define MX7D_PAD_EPDC_DATA08__QSPI_B_DATA0 0x0054 0x02C4 0x0000 0x2 0x0 +#define MX7D_PAD_EPDC_DATA08__UART6_DCE_RX 0x0054 0x02C4 0x071C 0x3 0x0 +#define MX7D_PAD_EPDC_DATA08__UART6_DTE_TX 0x0054 0x02C4 0x0000 0x3 0x0 +#define MX7D_PAD_EPDC_DATA08__EIM_OE 0x0054 0x02C4 0x0000 0x4 0x0 +#define MX7D_PAD_EPDC_DATA08__GPIO2_IO8 0x0054 0x02C4 0x0000 0x5 0x0 +#define MX7D_PAD_EPDC_DATA08__LCD_DATA8 0x0054 0x02C4 0x0658 0x6 0x0 +#define MX7D_PAD_EPDC_DATA08__LCD_BUSY 0x0054 0x02C4 0x0634 0x7 0x0 +#define MX7D_PAD_EPDC_DATA08__EPDC_SDCLK 0x0054 0x02C4 0x0000 0x8 0x0 +#define MX7D_PAD_EPDC_DATA09__EPDC_DATA9 0x0058 0x02C8 0x0000 0x0 0x0 +#define MX7D_PAD_EPDC_DATA09__SIM1_PORT1_CLK 0x0058 0x02C8 0x0000 0x1 0x0 +#define MX7D_PAD_EPDC_DATA09__QSPI_B_DATA1 0x0058 0x02C8 0x0000 0x2 0x0 +#define MX7D_PAD_EPDC_DATA09__UART6_DCE_TX 0x0058 0x02C8 0x0000 0x3 0x0 +#define MX7D_PAD_EPDC_DATA09__UART6_DTE_RX 0x0058 0x02C8 0x071C 0x3 0x1 +#define MX7D_PAD_EPDC_DATA09__EIM_RW 0x0058 0x02C8 0x0000 0x4 0x0 +#define MX7D_PAD_EPDC_DATA09__GPIO2_IO9 0x0058 0x02C8 0x0000 0x5 0x0 +#define MX7D_PAD_EPDC_DATA09__LCD_DATA9 0x0058 0x02C8 0x065C 0x6 0x0 +#define MX7D_PAD_EPDC_DATA09__LCD_DATA0 0x0058 0x02C8 0x0638 0x7 0x1 +#define MX7D_PAD_EPDC_DATA09__EPDC_SDLE 0x0058 0x02C8 0x0000 0x8 0x0 +#define MX7D_PAD_EPDC_DATA10__EPDC_DATA10 0x005C 0x02CC 0x0000 0x0 0x0 +#define MX7D_PAD_EPDC_DATA10__SIM1_PORT1_RST_B 0x005C 0x02CC 0x0000 0x1 0x0 +#define MX7D_PAD_EPDC_DATA10__QSPI_B_DATA2 0x005C 0x02CC 0x0000 0x2 0x0 +#define MX7D_PAD_EPDC_DATA10__UART6_DCE_RTS 0x005C 0x02CC 0x0718 0x3 0x0 +#define MX7D_PAD_EPDC_DATA10__UART6_DTE_CTS 0x005C 0x02CC 0x0000 0x3 0x0 +#define MX7D_PAD_EPDC_DATA10__EIM_CS0_B 0x005C 0x02CC 0x0000 0x4 0x0 +#define MX7D_PAD_EPDC_DATA10__GPIO2_IO10 0x005C 0x02CC 0x0000 0x5 0x0 +#define MX7D_PAD_EPDC_DATA10__LCD_DATA10 0x005C 0x02CC 0x0660 0x6 0x0 +#define MX7D_PAD_EPDC_DATA10__LCD_DATA9 0x005C 0x02CC 0x065C 0x7 0x1 +#define MX7D_PAD_EPDC_DATA10__EPDC_SDOE 0x005C 0x02CC 0x0000 0x8 0x0 +#define MX7D_PAD_EPDC_DATA11__EPDC_DATA11 0x0060 0x02D0 0x0000 0x0 0x0 +#define MX7D_PAD_EPDC_DATA11__SIM1_PORT1_SVEN 0x0060 0x02D0 0x0000 0x1 0x0 +#define MX7D_PAD_EPDC_DATA11__QSPI_B_DATA3 0x0060 0x02D0 0x0000 0x2 0x0 +#define MX7D_PAD_EPDC_DATA11__UART6_DCE_CTS 0x0060 0x02D0 0x0000 0x3 0x0 +#define MX7D_PAD_EPDC_DATA11__UART6_DTE_RTS 0x0060 0x02D0 0x0718 0x3 0x1 +#define MX7D_PAD_EPDC_DATA11__EIM_BCLK 0x0060 0x02D0 0x0000 0x4 0x0 +#define MX7D_PAD_EPDC_DATA11__GPIO2_IO11 0x0060 0x02D0 0x0000 0x5 0x0 +#define MX7D_PAD_EPDC_DATA11__LCD_DATA11 0x0060 0x02D0 0x0664 0x6 0x0 +#define MX7D_PAD_EPDC_DATA11__LCD_DATA1 0x0060 0x02D0 0x063C 0x7 0x1 +#define MX7D_PAD_EPDC_DATA11__EPDC_SDCE0 0x0060 0x02D0 0x0000 0x8 0x0 +#define MX7D_PAD_EPDC_DATA12__EPDC_DATA12 0x0064 0x02D4 0x0000 0x0 0x0 +#define MX7D_PAD_EPDC_DATA12__SIM1_PORT1_PD 0x0064 0x02D4 0x06E0 0x1 0x0 +#define MX7D_PAD_EPDC_DATA12__QSPI_B_DQS 0x0064 0x02D4 0x0000 0x2 0x0 +#define MX7D_PAD_EPDC_DATA12__UART7_DCE_RX 0x0064 0x02D4 0x0724 0x3 0x0 +#define MX7D_PAD_EPDC_DATA12__UART7_DTE_TX 0x0064 0x02D4 0x0000 0x3 0x0 +#define MX7D_PAD_EPDC_DATA12__EIM_LBA_B 0x0064 0x02D4 0x0000 0x4 0x0 +#define MX7D_PAD_EPDC_DATA12__GPIO2_IO12 0x0064 0x02D4 0x0000 0x5 0x0 +#define MX7D_PAD_EPDC_DATA12__LCD_DATA12 0x0064 0x02D4 0x0668 0x6 0x0 +#define MX7D_PAD_EPDC_DATA12__LCD_DATA21 0x0064 0x02D4 0x068C 0x7 0x0 +#define MX7D_PAD_EPDC_DATA12__EPDC_GDCLK 0x0064 0x02D4 0x0000 0x8 0x0 +#define MX7D_PAD_EPDC_DATA13__EPDC_DATA13 0x0068 0x02D8 0x0000 0x0 0x0 +#define MX7D_PAD_EPDC_DATA13__SIM2_PORT1_TRXD 0x0068 0x02D8 0x06EC 0x1 0x0 +#define MX7D_PAD_EPDC_DATA13__QSPI_B_SCLK 0x0068 0x02D8 0x0000 0x2 0x0 +#define MX7D_PAD_EPDC_DATA13__UART7_DCE_TX 0x0068 0x02D8 0x0000 0x3 0x0 +#define MX7D_PAD_EPDC_DATA13__UART7_DTE_RX 0x0068 0x02D8 0x0724 0x3 0x1 +#define MX7D_PAD_EPDC_DATA13__EIM_WAIT 0x0068 0x02D8 0x0000 0x4 0x0 +#define MX7D_PAD_EPDC_DATA13__GPIO2_IO13 0x0068 0x02D8 0x0000 0x5 0x0 +#define MX7D_PAD_EPDC_DATA13__LCD_DATA13 0x0068 0x02D8 0x066C 0x6 0x0 +#define MX7D_PAD_EPDC_DATA13__LCD_CS 0x0068 0x02D8 0x0000 0x7 0x0 +#define MX7D_PAD_EPDC_DATA13__EPDC_GDOE 0x0068 0x02D8 0x0000 0x8 0x0 +#define MX7D_PAD_EPDC_DATA14__EPDC_DATA14 0x006C 0x02DC 0x0000 0x0 0x0 +#define MX7D_PAD_EPDC_DATA14__SIM2_PORT1_CLK 0x006C 0x02DC 0x0000 0x1 0x0 +#define MX7D_PAD_EPDC_DATA14__QSPI_B_SS0_B 0x006C 0x02DC 0x0000 0x2 0x0 +#define MX7D_PAD_EPDC_DATA14__UART7_DCE_RTS 0x006C 0x02DC 0x0720 0x3 0x0 +#define MX7D_PAD_EPDC_DATA14__UART7_DTE_CTS 0x006C 0x02DC 0x0000 0x3 0x0 +#define MX7D_PAD_EPDC_DATA14__EIM_EB_B0 0x006C 0x02DC 0x0000 0x4 0x0 +#define MX7D_PAD_EPDC_DATA14__GPIO2_IO14 0x006C 0x02DC 0x0000 0x5 0x0 +#define MX7D_PAD_EPDC_DATA14__LCD_DATA14 0x006C 0x02DC 0x0670 0x6 0x0 +#define MX7D_PAD_EPDC_DATA14__LCD_DATA22 0x006C 0x02DC 0x0690 0x7 0x0 +#define MX7D_PAD_EPDC_DATA14__EPDC_GDSP 0x006C 0x02DC 0x0000 0x8 0x0 +#define MX7D_PAD_EPDC_DATA15__EPDC_DATA15 0x0070 0x02E0 0x0000 0x0 0x0 +#define MX7D_PAD_EPDC_DATA15__SIM2_PORT1_RST_B 0x0070 0x02E0 0x0000 0x1 0x0 +#define MX7D_PAD_EPDC_DATA15__QSPI_B_SS1_B 0x0070 0x02E0 0x0000 0x2 0x0 +#define MX7D_PAD_EPDC_DATA15__UART7_DCE_CTS 0x0070 0x02E0 0x0000 0x3 0x0 +#define MX7D_PAD_EPDC_DATA15__UART7_DTE_RTS 0x0070 0x02E0 0x0720 0x3 0x1 +#define MX7D_PAD_EPDC_DATA15__EIM_CS1_B 0x0070 0x02E0 0x0000 0x4 0x0 +#define MX7D_PAD_EPDC_DATA15__GPIO2_IO15 0x0070 0x02E0 0x0000 0x5 0x0 +#define MX7D_PAD_EPDC_DATA15__LCD_DATA15 0x0070 0x02E0 0x0674 0x6 0x0 +#define MX7D_PAD_EPDC_DATA15__LCD_WR_RWN 0x0070 0x02E0 0x0000 0x7 0x0 +#define MX7D_PAD_EPDC_DATA15__EPDC_PWR_COM 0x0070 0x02E0 0x0000 0x8 0x0 +#define MX7D_PAD_EPDC_SDCLK__EPDC_SDCLK 0x0074 0x02E4 0x0000 0x0 0x0 +#define MX7D_PAD_EPDC_SDCLK__SIM2_PORT2_SVEN 0x0074 0x02E4 0x0000 0x1 0x0 +#define MX7D_PAD_EPDC_SDCLK__ENET2_RGMII_RD0 0x0074 0x02E4 0x0000 0x2 0x0 +#define MX7D_PAD_EPDC_SDCLK__KPP_ROW4 0x0074 0x02E4 0x0624 0x3 0x0 +#define MX7D_PAD_EPDC_SDCLK__EIM_AD10 0x0074 0x02E4 0x0000 0x4 0x0 +#define MX7D_PAD_EPDC_SDCLK__GPIO2_IO16 0x0074 0x02E4 0x0000 0x5 0x0 +#define MX7D_PAD_EPDC_SDCLK__LCD_CLK 0x0074 0x02E4 0x0000 0x6 0x0 +#define MX7D_PAD_EPDC_SDCLK__LCD_DATA20 0x0074 0x02E4 0x0688 0x7 0x0 +#define MX7D_PAD_EPDC_SDLE__EPDC_SDLE 0x0078 0x02E8 0x0000 0x0 0x0 +#define MX7D_PAD_EPDC_SDLE__SIM2_PORT2_PD 0x0078 0x02E8 0x0000 0x1 0x0 +#define MX7D_PAD_EPDC_SDLE__ENET2_RGMII_RD1 0x0078 0x02E8 0x0000 0x2 0x0 +#define MX7D_PAD_EPDC_SDLE__KPP_COL4 0x0078 0x02E8 0x0604 0x3 0x0 +#define MX7D_PAD_EPDC_SDLE__EIM_AD11 0x0078 0x02E8 0x0000 0x4 0x0 +#define MX7D_PAD_EPDC_SDLE__GPIO2_IO17 0x0078 0x02E8 0x0000 0x5 0x0 +#define MX7D_PAD_EPDC_SDLE__LCD_DATA16 0x0078 0x02E8 0x0678 0x6 0x0 +#define MX7D_PAD_EPDC_SDLE__LCD_DATA8 0x0078 0x02E8 0x0658 0x7 0x1 +#define MX7D_PAD_EPDC_SDOE__EPDC_SDOE 0x007C 0x02EC 0x0000 0x0 0x0 +#define MX7D_PAD_EPDC_SDOE__FLEXTIMER1_CH0 0x007C 0x02EC 0x0584 0x1 0x0 +#define MX7D_PAD_EPDC_SDOE__ENET2_RGMII_RD2 0x007C 0x02EC 0x0000 0x2 0x0 +#define MX7D_PAD_EPDC_SDOE__KPP_COL5 0x007C 0x02EC 0x0608 0x3 0x1 +#define MX7D_PAD_EPDC_SDOE__EIM_AD12 0x007C 0x02EC 0x0000 0x4 0x0 +#define MX7D_PAD_EPDC_SDOE__GPIO2_IO18 0x007C 0x02EC 0x0000 0x5 0x0 +#define MX7D_PAD_EPDC_SDOE__LCD_DATA17 0x007C 0x02EC 0x067C 0x6 0x0 +#define MX7D_PAD_EPDC_SDOE__LCD_DATA23 0x007C 0x02EC 0x0694 0x7 0x0 +#define MX7D_PAD_EPDC_SDSHR__EPDC_SDSHR 0x0080 0x02F0 0x0000 0x0 0x0 +#define MX7D_PAD_EPDC_SDSHR__FLEXTIMER1_CH1 0x0080 0x02F0 0x0588 0x1 0x0 +#define MX7D_PAD_EPDC_SDSHR__ENET2_RGMII_RD3 0x0080 0x02F0 0x0000 0x2 0x0 +#define MX7D_PAD_EPDC_SDSHR__KPP_ROW5 0x0080 0x02F0 0x0628 0x3 0x1 +#define MX7D_PAD_EPDC_SDSHR__EIM_AD13 0x0080 0x02F0 0x0000 0x4 0x0 +#define MX7D_PAD_EPDC_SDSHR__GPIO2_IO19 0x0080 0x02F0 0x0000 0x5 0x0 +#define MX7D_PAD_EPDC_SDSHR__LCD_DATA18 0x0080 0x02F0 0x0680 0x6 0x0 +#define MX7D_PAD_EPDC_SDSHR__LCD_DATA10 0x0080 0x02F0 0x0660 0x7 0x1 +#define MX7D_PAD_EPDC_SDCE0__EPDC_SDCE0 0x0084 0x02F4 0x0000 0x0 0x0 +#define MX7D_PAD_EPDC_SDCE0__FLEXTIMER1_CH2 0x0084 0x02F4 0x058C 0x1 0x0 +#define MX7D_PAD_EPDC_SDCE0__ENET2_RGMII_RX_CTL 0x0084 0x02F4 0x0000 0x2 0x0 +#define MX7D_PAD_EPDC_SDCE0__EIM_AD14 0x0084 0x02F4 0x0000 0x4 0x0 +#define MX7D_PAD_EPDC_SDCE0__GPIO2_IO20 0x0084 0x02F4 0x0000 0x5 0x0 +#define MX7D_PAD_EPDC_SDCE0__LCD_DATA19 0x0084 0x02F4 0x0684 0x6 0x0 +#define MX7D_PAD_EPDC_SDCE0__LCD_DATA5 0x0084 0x02F4 0x064C 0x7 0x1 +#define MX7D_PAD_EPDC_SDCE1__EPDC_SDCE1 0x0088 0x02F8 0x0000 0x0 0x0 +#define MX7D_PAD_EPDC_SDCE1__FLEXTIMER1_CH3 0x0088 0x02F8 0x0590 0x1 0x0 +#define MX7D_PAD_EPDC_SDCE1__ENET2_RGMII_RXC 0x0088 0x02F8 0x0578 0x2 0x0 +#define MX7D_PAD_EPDC_SDCE1__ENET2_RX_ER 0x0088 0x02F8 0x0000 0x3 0x0 +#define MX7D_PAD_EPDC_SDCE1__EIM_AD15 0x0088 0x02F8 0x0000 0x4 0x0 +#define MX7D_PAD_EPDC_SDCE1__GPIO2_IO21 0x0088 0x02F8 0x0000 0x5 0x0 +#define MX7D_PAD_EPDC_SDCE1__LCD_DATA20 0x0088 0x02F8 0x0688 0x6 0x1 +#define MX7D_PAD_EPDC_SDCE1__LCD_DATA4 0x0088 0x02F8 0x0648 0x7 0x1 +#define MX7D_PAD_EPDC_SDCE2__EPDC_SDCE2 0x008C 0x02FC 0x0000 0x0 0x0 +#define MX7D_PAD_EPDC_SDCE2__SIM2_PORT1_SVEN 0x008C 0x02FC 0x0000 0x1 0x0 +#define MX7D_PAD_EPDC_SDCE2__ENET2_RGMII_TD0 0x008C 0x02FC 0x0000 0x2 0x0 +#define MX7D_PAD_EPDC_SDCE2__KPP_COL6 0x008C 0x02FC 0x060C 0x3 0x1 +#define MX7D_PAD_EPDC_SDCE2__EIM_ADDR16 0x008C 0x02FC 0x0000 0x4 0x0 +#define MX7D_PAD_EPDC_SDCE2__GPIO2_IO22 0x008C 0x02FC 0x0000 0x5 0x0 +#define MX7D_PAD_EPDC_SDCE2__LCD_DATA21 0x008C 0x02FC 0x068C 0x6 0x1 +#define MX7D_PAD_EPDC_SDCE2__LCD_DATA3 0x008C 0x02FC 0x0644 0x7 0x1 +#define MX7D_PAD_EPDC_SDCE3__EPDC_SDCE3 0x0090 0x0300 0x0000 0x0 0x0 +#define MX7D_PAD_EPDC_SDCE3__SIM2_PORT1_PD 0x0090 0x0300 0x06E8 0x1 0x0 +#define MX7D_PAD_EPDC_SDCE3__ENET2_RGMII_TD1 0x0090 0x0300 0x0000 0x2 0x0 +#define MX7D_PAD_EPDC_SDCE3__KPP_ROW6 0x0090 0x0300 0x062C 0x3 0x1 +#define MX7D_PAD_EPDC_SDCE3__EIM_ADDR17 0x0090 0x0300 0x0000 0x4 0x0 +#define MX7D_PAD_EPDC_SDCE3__GPIO2_IO23 0x0090 0x0300 0x0000 0x5 0x0 +#define MX7D_PAD_EPDC_SDCE3__LCD_DATA22 0x0090 0x0300 0x0690 0x6 0x1 +#define MX7D_PAD_EPDC_SDCE3__LCD_DATA2 0x0090 0x0300 0x0640 0x7 0x1 +#define MX7D_PAD_EPDC_GDCLK__EPDC_GDCLK 0x0094 0x0304 0x0000 0x0 0x0 +#define MX7D_PAD_EPDC_GDCLK__FLEXTIMER2_CH0 0x0094 0x0304 0x05AC 0x1 0x0 +#define MX7D_PAD_EPDC_GDCLK__ENET2_RGMII_TD2 0x0094 0x0304 0x0000 0x2 0x0 +#define MX7D_PAD_EPDC_GDCLK__KPP_COL7 0x0094 0x0304 0x0610 0x3 0x0 +#define MX7D_PAD_EPDC_GDCLK__EIM_ADDR18 0x0094 0x0304 0x0000 0x4 0x0 +#define MX7D_PAD_EPDC_GDCLK__GPIO2_IO24 0x0094 0x0304 0x0000 0x5 0x0 +#define MX7D_PAD_EPDC_GDCLK__LCD_DATA23 0x0094 0x0304 0x0694 0x6 0x1 +#define MX7D_PAD_EPDC_GDCLK__LCD_DATA16 0x0094 0x0304 0x0678 0x7 0x1 +#define MX7D_PAD_EPDC_GDOE__EPDC_GDOE 0x0098 0x0308 0x0000 0x0 0x0 +#define MX7D_PAD_EPDC_GDOE__FLEXTIMER2_CH1 0x0098 0x0308 0x05B0 0x1 0x0 +#define MX7D_PAD_EPDC_GDOE__ENET2_RGMII_TD3 0x0098 0x0308 0x0000 0x2 0x0 +#define MX7D_PAD_EPDC_GDOE__KPP_ROW7 0x0098 0x0308 0x0630 0x3 0x0 +#define MX7D_PAD_EPDC_GDOE__EIM_ADDR19 0x0098 0x0308 0x0000 0x4 0x0 +#define MX7D_PAD_EPDC_GDOE__GPIO2_IO25 0x0098 0x0308 0x0000 0x5 0x0 +#define MX7D_PAD_EPDC_GDOE__LCD_WR_RWN 0x0098 0x0308 0x0000 0x6 0x0 +#define MX7D_PAD_EPDC_GDOE__LCD_DATA18 0x0098 0x0308 0x0680 0x7 0x1 +#define MX7D_PAD_EPDC_GDRL__EPDC_GDRL 0x009C 0x030C 0x0000 0x0 0x0 +#define MX7D_PAD_EPDC_GDRL__FLEXTIMER2_CH2 0x009C 0x030C 0x05B4 0x1 0x0 +#define MX7D_PAD_EPDC_GDRL__ENET2_RGMII_TX_CTL 0x009C 0x030C 0x0000 0x2 0x0 +#define MX7D_PAD_EPDC_GDRL__EIM_ADDR20 0x009C 0x030C 0x0000 0x4 0x0 +#define MX7D_PAD_EPDC_GDRL__GPIO2_IO26 0x009C 0x030C 0x0000 0x5 0x0 +#define MX7D_PAD_EPDC_GDRL__LCD_RD_E 0x009C 0x030C 0x0000 0x6 0x0 +#define MX7D_PAD_EPDC_GDRL__LCD_DATA19 0x009C 0x030C 0x0684 0x7 0x1 +#define MX7D_PAD_EPDC_GDSP__EPDC_GDSP 0x00A0 0x0310 0x0000 0x0 0x0 +#define MX7D_PAD_EPDC_GDSP__FLEXTIMER2_CH3 0x00A0 0x0310 0x05B8 0x1 0x0 +#define MX7D_PAD_EPDC_GDSP__ENET2_RGMII_TXC 0x00A0 0x0310 0x0000 0x2 0x0 +#define MX7D_PAD_EPDC_GDSP__ENET2_TX_ER 0x00A0 0x0310 0x0000 0x3 0x0 +#define MX7D_PAD_EPDC_GDSP__EIM_ADDR21 0x00A0 0x0310 0x0000 0x4 0x0 +#define MX7D_PAD_EPDC_GDSP__GPIO2_IO27 0x00A0 0x0310 0x0000 0x5 0x0 +#define MX7D_PAD_EPDC_GDSP__LCD_BUSY 0x00A0 0x0310 0x0634 0x6 0x1 +#define MX7D_PAD_EPDC_GDSP__LCD_DATA17 0x00A0 0x0310 0x067C 0x7 0x1 +#define MX7D_PAD_EPDC_BDR0__EPDC_BDR0 0x00A4 0x0314 0x0000 0x0 0x0 +#define MX7D_PAD_EPDC_BDR0__ENET2_TX_CLK 0x00A4 0x0314 0x0000 0x2 0x0 +#define MX7D_PAD_EPDC_BDR0__CCM_ENET_REF_CLK2 0x00A4 0x0314 0x0570 0x3 0x1 +#define MX7D_PAD_EPDC_BDR0__EIM_ADDR22 0x00A4 0x0314 0x0000 0x4 0x0 +#define MX7D_PAD_EPDC_BDR0__GPIO2_IO28 0x00A4 0x0314 0x0000 0x5 0x0 +#define MX7D_PAD_EPDC_BDR0__LCD_CS 0x00A4 0x0314 0x0000 0x6 0x0 +#define MX7D_PAD_EPDC_BDR0__LCD_DATA7 0x00A4 0x0314 0x0654 0x7 0x1 +#define MX7D_PAD_EPDC_BDR1__EPDC_BDR1 0x00A8 0x0318 0x0000 0x0 0x0 +#define MX7D_PAD_EPDC_BDR1__EPDC_SDCLKN 0x00A8 0x0318 0x0000 0x1 0x0 +#define MX7D_PAD_EPDC_BDR1__ENET2_RX_CLK 0x00A8 0x0318 0x0578 0x2 0x1 +#define MX7D_PAD_EPDC_BDR1__EIM_AD8 0x00A8 0x0318 0x0000 0x4 0x0 +#define MX7D_PAD_EPDC_BDR1__GPIO2_IO29 0x00A8 0x0318 0x0000 0x5 0x0 +#define MX7D_PAD_EPDC_BDR1__LCD_ENABLE 0x00A8 0x0318 0x0000 0x6 0x0 +#define MX7D_PAD_EPDC_BDR1__LCD_DATA6 0x00A8 0x0318 0x0650 0x7 0x1 +#define MX7D_PAD_EPDC_PWR_COM__EPDC_PWR_COM 0x00AC 0x031C 0x0000 0x0 0x0 +#define MX7D_PAD_EPDC_PWR_COM__FLEXTIMER2_PHA 0x00AC 0x031C 0x05CC 0x1 0x0 +#define MX7D_PAD_EPDC_PWR_COM__ENET2_CRS 0x00AC 0x031C 0x0000 0x2 0x0 +#define MX7D_PAD_EPDC_PWR_COM__EIM_AD9 0x00AC 0x031C 0x0000 0x4 0x0 +#define MX7D_PAD_EPDC_PWR_COM__GPIO2_IO30 0x00AC 0x031C 0x0000 0x5 0x0 +#define MX7D_PAD_EPDC_PWR_COM__LCD_HSYNC 0x00AC 0x031C 0x0000 0x6 0x0 +#define MX7D_PAD_EPDC_PWR_COM__LCD_DATA11 0x00AC 0x031C 0x0664 0x7 0x1 +#define MX7D_PAD_EPDC_PWR_STAT__EPDC_PWR_STAT 0x00B0 0x0320 0x0580 0x0 0x0 +#define MX7D_PAD_EPDC_PWR_STAT__FLEXTIMER2_PHB 0x00B0 0x0320 0x05D0 0x1 0x0 +#define MX7D_PAD_EPDC_PWR_STAT__ENET2_COL 0x00B0 0x0320 0x0000 0x2 0x0 +#define MX7D_PAD_EPDC_PWR_STAT__EIM_EB_B1 0x00B0 0x0320 0x0000 0x4 0x0 +#define MX7D_PAD_EPDC_PWR_STAT__GPIO2_IO31 0x00B0 0x0320 0x0000 0x5 0x0 +#define MX7D_PAD_EPDC_PWR_STAT__LCD_VSYNC 0x00B0 0x0320 0x0698 0x6 0x1 +#define MX7D_PAD_EPDC_PWR_STAT__LCD_DATA12 0x00B0 0x0320 0x0668 0x7 0x1 +#define MX7D_PAD_LCD_CLK__LCD_CLK 0x00B4 0x0324 0x0000 0x0 0x0 +#define MX7D_PAD_LCD_CLK__ECSPI4_MISO 0x00B4 0x0324 0x0558 0x1 0x0 +#define MX7D_PAD_LCD_CLK__ENET1_1588_EVENT2_IN 0x00B4 0x0324 0x0000 0x2 0x0 +#define MX7D_PAD_LCD_CLK__CSI_DATA16 0x00B4 0x0324 0x0000 0x3 0x0 +#define MX7D_PAD_LCD_CLK__UART2_DCE_RX 0x00B4 0x0324 0x06FC 0x4 0x0 +#define MX7D_PAD_LCD_CLK__UART2_DTE_TX 0x00B4 0x0324 0x0000 0x4 0x0 +#define MX7D_PAD_LCD_CLK__GPIO3_IO0 0x00B4 0x0324 0x0000 0x5 0x0 +#define MX7D_PAD_LCD_ENABLE__LCD_ENABLE 0x00B8 0x0328 0x0000 0x0 0x0 +#define MX7D_PAD_LCD_ENABLE__ECSPI4_MOSI 0x00B8 0x0328 0x055C 0x1 0x0 +#define MX7D_PAD_LCD_ENABLE__ENET1_1588_EVENT3_IN 0x00B8 0x0328 0x0000 0x2 0x0 +#define MX7D_PAD_LCD_ENABLE__CSI_DATA17 0x00B8 0x0328 0x0000 0x3 0x0 +#define MX7D_PAD_LCD_ENABLE__UART2_DCE_TX 0x00B8 0x0328 0x0000 0x4 0x0 +#define MX7D_PAD_LCD_ENABLE__UART2_DTE_RX 0x00B8 0x0328 0x06FC 0x4 0x1 +#define MX7D_PAD_LCD_ENABLE__GPIO3_IO1 0x00B8 0x0328 0x0000 0x5 0x0 +#define MX7D_PAD_LCD_HSYNC__LCD_HSYNC 0x00BC 0x032C 0x0000 0x0 0x0 +#define MX7D_PAD_LCD_HSYNC__ECSPI4_SCLK 0x00BC 0x032C 0x0554 0x1 0x0 +#define MX7D_PAD_LCD_HSYNC__ENET2_1588_EVENT2_IN 0x00BC 0x032C 0x0000 0x2 0x0 +#define MX7D_PAD_LCD_HSYNC__CSI_DATA18 0x00BC 0x032C 0x0000 0x3 0x0 +#define MX7D_PAD_LCD_HSYNC__UART2_DCE_RTS 0x00BC 0x032C 0x06F8 0x4 0x0 +#define MX7D_PAD_LCD_HSYNC__UART2_DTE_CTS 0x00BC 0x032C 0x0000 0x4 0x0 +#define MX7D_PAD_LCD_HSYNC__GPIO3_IO2 0x00BC 0x032C 0x0000 0x5 0x0 +#define MX7D_PAD_LCD_VSYNC__LCD_VSYNC 0x00C0 0x0330 0x0698 0x0 0x2 +#define MX7D_PAD_LCD_VSYNC__ECSPI4_SS0 0x00C0 0x0330 0x0560 0x1 0x0 +#define MX7D_PAD_LCD_VSYNC__ENET2_1588_EVENT3_IN 0x00C0 0x0330 0x0000 0x2 0x0 +#define MX7D_PAD_LCD_VSYNC__CSI_DATA19 0x00C0 0x0330 0x0000 0x3 0x0 +#define MX7D_PAD_LCD_VSYNC__UART2_DCE_CTS 0x00C0 0x0330 0x0000 0x4 0x0 +#define MX7D_PAD_LCD_VSYNC__UART2_DTE_RTS 0x00C0 0x0330 0x06F8 0x4 0x1 +#define MX7D_PAD_LCD_VSYNC__GPIO3_IO3 0x00C0 0x0330 0x0000 0x5 0x0 +#define MX7D_PAD_LCD_RESET__LCD_RESET 0x00C4 0x0334 0x0000 0x0 0x0 +#define MX7D_PAD_LCD_RESET__GPT1_COMPARE1 0x00C4 0x0334 0x0000 0x1 0x0 +#define MX7D_PAD_LCD_RESET__ARM_PLATFORM_EVENTI 0x00C4 0x0334 0x0000 0x2 0x0 +#define MX7D_PAD_LCD_RESET__CSI_FIELD 0x00C4 0x0334 0x0000 0x3 0x0 +#define MX7D_PAD_LCD_RESET__EIM_DTACK_B 0x00C4 0x0334 0x0000 0x4 0x0 +#define MX7D_PAD_LCD_RESET__GPIO3_IO4 0x00C4 0x0334 0x0000 0x5 0x0 +#define MX7D_PAD_LCD_DATA00__LCD_DATA0 0x00C8 0x0338 0x0638 0x0 0x2 +#define MX7D_PAD_LCD_DATA00__GPT1_COMPARE2 0x00C8 0x0338 0x0000 0x1 0x0 +#define MX7D_PAD_LCD_DATA00__CSI_DATA20 0x00C8 0x0338 0x0000 0x3 0x0 +#define MX7D_PAD_LCD_DATA00__EIM_DATA0 0x00C8 0x0338 0x0000 0x4 0x0 +#define MX7D_PAD_LCD_DATA00__GPIO3_IO5 0x00C8 0x0338 0x0000 0x5 0x0 +#define MX7D_PAD_LCD_DATA00__SRC_BOOT_CFG0 0x00C8 0x0338 0x0000 0x6 0x0 +#define MX7D_PAD_LCD_DATA01__LCD_DATA1 0x00CC 0x033C 0x063C 0x0 0x2 +#define MX7D_PAD_LCD_DATA01__GPT1_COMPARE3 0x00CC 0x033C 0x0000 0x1 0x0 +#define MX7D_PAD_LCD_DATA01__CSI_DATA21 0x00CC 0x033C 0x0000 0x3 0x0 +#define MX7D_PAD_LCD_DATA01__EIM_DATA1 0x00CC 0x033C 0x0000 0x4 0x0 +#define MX7D_PAD_LCD_DATA01__GPIO3_IO6 0x00CC 0x033C 0x0000 0x5 0x0 +#define MX7D_PAD_LCD_DATA01__SRC_BOOT_CFG1 0x00CC 0x033C 0x0000 0x6 0x0 +#define MX7D_PAD_LCD_DATA02__LCD_DATA2 0x00D0 0x0340 0x0640 0x0 0x2 +#define MX7D_PAD_LCD_DATA02__GPT1_CLK 0x00D0 0x0340 0x0000 0x1 0x0 +#define MX7D_PAD_LCD_DATA02__CSI_DATA22 0x00D0 0x0340 0x0000 0x3 0x0 +#define MX7D_PAD_LCD_DATA02__EIM_DATA2 0x00D0 0x0340 0x0000 0x4 0x0 +#define MX7D_PAD_LCD_DATA02__GPIO3_IO7 0x00D0 0x0340 0x0000 0x5 0x0 +#define MX7D_PAD_LCD_DATA02__SRC_BOOT_CFG2 0x00D0 0x0340 0x0000 0x6 0x0 +#define MX7D_PAD_LCD_DATA03__LCD_DATA3 0x00D4 0x0344 0x0644 0x0 0x2 +#define MX7D_PAD_LCD_DATA03__GPT1_CAPTURE1 0x00D4 0x0344 0x0000 0x1 0x0 +#define MX7D_PAD_LCD_DATA03__CSI_DATA23 0x00D4 0x0344 0x0000 0x3 0x0 +#define MX7D_PAD_LCD_DATA03__EIM_DATA3 0x00D4 0x0344 0x0000 0x4 0x0 +#define MX7D_PAD_LCD_DATA03__GPIO3_IO8 0x00D4 0x0344 0x0000 0x5 0x0 +#define MX7D_PAD_LCD_DATA03__SRC_BOOT_CFG3 0x00D4 0x0344 0x0000 0x6 0x0 +#define MX7D_PAD_LCD_DATA04__LCD_DATA4 0x00D8 0x0348 0x0648 0x0 0x2 +#define MX7D_PAD_LCD_DATA04__GPT1_CAPTURE2 0x00D8 0x0348 0x0000 0x1 0x0 +#define MX7D_PAD_LCD_DATA04__CSI_VSYNC 0x00D8 0x0348 0x0520 0x3 0x0 +#define MX7D_PAD_LCD_DATA04__EIM_DATA4 0x00D8 0x0348 0x0000 0x4 0x0 +#define MX7D_PAD_LCD_DATA04__GPIO3_IO9 0x00D8 0x0348 0x0000 0x5 0x0 +#define MX7D_PAD_LCD_DATA04__SRC_BOOT_CFG4 0x00D8 0x0348 0x0000 0x6 0x0 +#define MX7D_PAD_LCD_DATA05__LCD_DATA5 0x00DC 0x034C 0x064C 0x0 0x2 +#define MX7D_PAD_LCD_DATA05__CSI_HSYNC 0x00DC 0x034C 0x0518 0x3 0x0 +#define MX7D_PAD_LCD_DATA05__EIM_DATA5 0x00DC 0x034C 0x0000 0x4 0x0 +#define MX7D_PAD_LCD_DATA05__GPIO3_IO10 0x00DC 0x034C 0x0000 0x5 0x0 +#define MX7D_PAD_LCD_DATA05__SRC_BOOT_CFG5 0x00DC 0x034C 0x0000 0x6 0x0 +#define MX7D_PAD_LCD_DATA06__LCD_DATA6 0x00E0 0x0350 0x0650 0x0 0x2 +#define MX7D_PAD_LCD_DATA06__CSI_PIXCLK 0x00E0 0x0350 0x051C 0x3 0x0 +#define MX7D_PAD_LCD_DATA06__EIM_DATA6 0x00E0 0x0350 0x0000 0x4 0x0 +#define MX7D_PAD_LCD_DATA06__GPIO3_IO11 0x00E0 0x0350 0x0000 0x5 0x0 +#define MX7D_PAD_LCD_DATA06__SRC_BOOT_CFG6 0x00E0 0x0350 0x0000 0x6 0x0 +#define MX7D_PAD_LCD_DATA07__LCD_DATA7 0x00E4 0x0354 0x0654 0x0 0x2 +#define MX7D_PAD_LCD_DATA07__CSI_MCLK 0x00E4 0x0354 0x0000 0x3 0x0 +#define MX7D_PAD_LCD_DATA07__EIM_DATA7 0x00E4 0x0354 0x0000 0x4 0x0 +#define MX7D_PAD_LCD_DATA07__GPIO3_IO12 0x00E4 0x0354 0x0000 0x5 0x0 +#define MX7D_PAD_LCD_DATA07__SRC_BOOT_CFG7 0x00E4 0x0354 0x0000 0x6 0x0 +#define MX7D_PAD_LCD_DATA08__LCD_DATA8 0x00E8 0x0358 0x0658 0x0 0x2 +#define MX7D_PAD_LCD_DATA08__CSI_DATA9 0x00E8 0x0358 0x0514 0x3 0x0 +#define MX7D_PAD_LCD_DATA08__EIM_DATA8 0x00E8 0x0358 0x0000 0x4 0x0 +#define MX7D_PAD_LCD_DATA08__GPIO3_IO13 0x00E8 0x0358 0x0000 0x5 0x0 +#define MX7D_PAD_LCD_DATA08__SRC_BOOT_CFG8 0x00E8 0x0358 0x0000 0x6 0x0 +#define MX7D_PAD_LCD_DATA09__LCD_DATA9 0x00EC 0x035C 0x065C 0x0 0x2 +#define MX7D_PAD_LCD_DATA09__CSI_DATA8 0x00EC 0x035C 0x0510 0x3 0x0 +#define MX7D_PAD_LCD_DATA09__EIM_DATA9 0x00EC 0x035C 0x0000 0x4 0x0 +#define MX7D_PAD_LCD_DATA09__GPIO3_IO14 0x00EC 0x035C 0x0000 0x5 0x0 +#define MX7D_PAD_LCD_DATA09__SRC_BOOT_CFG9 0x00EC 0x035C 0x0000 0x6 0x0 +#define MX7D_PAD_LCD_DATA10__LCD_DATA10 0x00F0 0x0360 0x0660 0x0 0x2 +#define MX7D_PAD_LCD_DATA10__CSI_DATA7 0x00F0 0x0360 0x050C 0x3 0x0 +#define MX7D_PAD_LCD_DATA10__EIM_DATA10 0x00F0 0x0360 0x0000 0x4 0x0 +#define MX7D_PAD_LCD_DATA10__GPIO3_IO15 0x00F0 0x0360 0x0000 0x5 0x0 +#define MX7D_PAD_LCD_DATA10__SRC_BOOT_CFG10 0x00F0 0x0360 0x0000 0x6 0x0 +#define MX7D_PAD_LCD_DATA11__LCD_DATA11 0x00F4 0x0364 0x0664 0x0 0x2 +#define MX7D_PAD_LCD_DATA11__CSI_DATA6 0x00F4 0x0364 0x0508 0x3 0x0 +#define MX7D_PAD_LCD_DATA11__EIM_DATA11 0x00F4 0x0364 0x0000 0x4 0x0 +#define MX7D_PAD_LCD_DATA11__GPIO3_IO16 0x00F4 0x0364 0x0000 0x5 0x0 +#define MX7D_PAD_LCD_DATA11__SRC_BOOT_CFG11 0x00F4 0x0364 0x0000 0x6 0x0 +#define MX7D_PAD_LCD_DATA12__LCD_DATA12 0x00F8 0x0368 0x0668 0x0 0x2 +#define MX7D_PAD_LCD_DATA12__CSI_DATA5 0x00F8 0x0368 0x0504 0x3 0x0 +#define MX7D_PAD_LCD_DATA12__EIM_DATA12 0x00F8 0x0368 0x0000 0x4 0x0 +#define MX7D_PAD_LCD_DATA12__GPIO3_IO17 0x00F8 0x0368 0x0000 0x5 0x0 +#define MX7D_PAD_LCD_DATA12__SRC_BOOT_CFG12 0x00F8 0x0368 0x0000 0x6 0x0 +#define MX7D_PAD_LCD_DATA13__LCD_DATA13 0x00FC 0x036C 0x066C 0x0 0x1 +#define MX7D_PAD_LCD_DATA13__CSI_DATA4 0x00FC 0x036C 0x0500 0x3 0x0 +#define MX7D_PAD_LCD_DATA13__EIM_DATA13 0x00FC 0x036C 0x0000 0x4 0x0 +#define MX7D_PAD_LCD_DATA13__GPIO3_IO18 0x00FC 0x036C 0x0000 0x5 0x0 +#define MX7D_PAD_LCD_DATA13__SRC_BOOT_CFG13 0x00FC 0x036C 0x0000 0x6 0x0 +#define MX7D_PAD_LCD_DATA14__LCD_DATA14 0x0100 0x0370 0x0670 0x0 0x1 +#define MX7D_PAD_LCD_DATA14__CSI_DATA3 0x0100 0x0370 0x04FC 0x3 0x0 +#define MX7D_PAD_LCD_DATA14__EIM_DATA14 0x0100 0x0370 0x0000 0x4 0x0 +#define MX7D_PAD_LCD_DATA14__GPIO3_IO19 0x0100 0x0370 0x0000 0x5 0x0 +#define MX7D_PAD_LCD_DATA14__SRC_BOOT_CFG14 0x0100 0x0370 0x0000 0x6 0x0 +#define MX7D_PAD_LCD_DATA15__LCD_DATA15 0x0104 0x0374 0x0674 0x0 0x1 +#define MX7D_PAD_LCD_DATA15__CSI_DATA2 0x0104 0x0374 0x04F8 0x3 0x0 +#define MX7D_PAD_LCD_DATA15__EIM_DATA15 0x0104 0x0374 0x0000 0x4 0x0 +#define MX7D_PAD_LCD_DATA15__GPIO3_IO20 0x0104 0x0374 0x0000 0x5 0x0 +#define MX7D_PAD_LCD_DATA15__SRC_BOOT_CFG15 0x0104 0x0374 0x0000 0x6 0x0 +#define MX7D_PAD_LCD_DATA16__LCD_DATA16 0x0108 0x0378 0x0678 0x0 0x2 +#define MX7D_PAD_LCD_DATA16__FLEXTIMER1_CH4 0x0108 0x0378 0x0594 0x1 0x0 +#define MX7D_PAD_LCD_DATA16__CSI_DATA1 0x0108 0x0378 0x0000 0x3 0x0 +#define MX7D_PAD_LCD_DATA16__EIM_CRE 0x0108 0x0378 0x0000 0x4 0x0 +#define MX7D_PAD_LCD_DATA16__GPIO3_IO21 0x0108 0x0378 0x0000 0x5 0x0 +#define MX7D_PAD_LCD_DATA16__SRC_BOOT_CFG16 0x0108 0x0378 0x0000 0x6 0x0 +#define MX7D_PAD_LCD_DATA17__LCD_DATA17 0x010C 0x037C 0x067C 0x0 0x2 +#define MX7D_PAD_LCD_DATA17__FLEXTIMER1_CH5 0x010C 0x037C 0x0598 0x1 0x0 +#define MX7D_PAD_LCD_DATA17__CSI_DATA0 0x010C 0x037C 0x0000 0x3 0x0 +#define MX7D_PAD_LCD_DATA17__EIM_ACLK_FREERUN 0x010C 0x037C 0x0000 0x4 0x0 +#define MX7D_PAD_LCD_DATA17__GPIO3_IO22 0x010C 0x037C 0x0000 0x5 0x0 +#define MX7D_PAD_LCD_DATA17__SRC_BOOT_CFG17 0x010C 0x037C 0x0000 0x6 0x0 +#define MX7D_PAD_LCD_DATA18__LCD_DATA18 0x0110 0x0380 0x0680 0x0 0x2 +#define MX7D_PAD_LCD_DATA18__FLEXTIMER1_CH6 0x0110 0x0380 0x059C 0x1 0x0 +#define MX7D_PAD_LCD_DATA18__ARM_PLATFORM_EVENTO 0x0110 0x0380 0x0000 0x2 0x0 +#define MX7D_PAD_LCD_DATA18__CSI_DATA15 0x0110 0x0380 0x0000 0x3 0x0 +#define MX7D_PAD_LCD_DATA18__EIM_CS2_B 0x0110 0x0380 0x0000 0x4 0x0 +#define MX7D_PAD_LCD_DATA18__GPIO3_IO23 0x0110 0x0380 0x0000 0x5 0x0 +#define MX7D_PAD_LCD_DATA18__SRC_BOOT_CFG18 0x0110 0x0380 0x0000 0x6 0x0 +#define MX7D_PAD_LCD_DATA19__EIM_CS3_B 0x0114 0x0384 0x0000 0x4 0x0 +#define MX7D_PAD_LCD_DATA19__GPIO3_IO24 0x0114 0x0384 0x0000 0x5 0x0 +#define MX7D_PAD_LCD_DATA19__SRC_BOOT_CFG19 0x0114 0x0384 0x0000 0x6 0x0 +#define MX7D_PAD_LCD_DATA19__LCD_DATA19 0x0114 0x0384 0x0684 0x0 0x2 +#define MX7D_PAD_LCD_DATA19__FLEXTIMER1_CH7 0x0114 0x0384 0x05A0 0x1 0x0 +#define MX7D_PAD_LCD_DATA19__CSI_DATA14 0x0114 0x0384 0x0000 0x3 0x0 +#define MX7D_PAD_LCD_DATA20__EIM_ADDR23 0x0118 0x0388 0x0000 0x4 0x0 +#define MX7D_PAD_LCD_DATA20__GPIO3_IO25 0x0118 0x0388 0x0000 0x5 0x0 +#define MX7D_PAD_LCD_DATA20__I2C3_SCL 0x0118 0x0388 0x05E4 0x6 0x1 +#define MX7D_PAD_LCD_DATA20__LCD_DATA20 0x0118 0x0388 0x0688 0x0 0x2 +#define MX7D_PAD_LCD_DATA20__FLEXTIMER2_CH4 0x0118 0x0388 0x05BC 0x1 0x0 +#define MX7D_PAD_LCD_DATA20__ENET1_1588_EVENT2_OUT 0x0118 0x0388 0x0000 0x2 0x0 +#define MX7D_PAD_LCD_DATA20__CSI_DATA13 0x0118 0x0388 0x0000 0x3 0x0 +#define MX7D_PAD_LCD_DATA21__LCD_DATA21 0x011C 0x038C 0x068C 0x0 0x2 +#define MX7D_PAD_LCD_DATA21__FLEXTIMER2_CH5 0x011C 0x038C 0x05C0 0x1 0x0 +#define MX7D_PAD_LCD_DATA21__ENET1_1588_EVENT3_OUT 0x011C 0x038C 0x0000 0x2 0x0 +#define MX7D_PAD_LCD_DATA21__CSI_DATA12 0x011C 0x038C 0x0000 0x3 0x0 +#define MX7D_PAD_LCD_DATA21__EIM_ADDR24 0x011C 0x038C 0x0000 0x4 0x0 +#define MX7D_PAD_LCD_DATA21__GPIO3_IO26 0x011C 0x038C 0x0000 0x5 0x0 +#define MX7D_PAD_LCD_DATA21__I2C3_SDA 0x011C 0x038C 0x05E8 0x6 0x1 +#define MX7D_PAD_LCD_DATA22__LCD_DATA22 0x0120 0x0390 0x0690 0x0 0x2 +#define MX7D_PAD_LCD_DATA22__FLEXTIMER2_CH6 0x0120 0x0390 0x05C4 0x1 0x0 +#define MX7D_PAD_LCD_DATA22__ENET2_1588_EVENT2_OUT 0x0120 0x0390 0x0000 0x2 0x0 +#define MX7D_PAD_LCD_DATA22__CSI_DATA11 0x0120 0x0390 0x0000 0x3 0x0 +#define MX7D_PAD_LCD_DATA22__EIM_ADDR25 0x0120 0x0390 0x0000 0x4 0x0 +#define MX7D_PAD_LCD_DATA22__GPIO3_IO27 0x0120 0x0390 0x0000 0x5 0x0 +#define MX7D_PAD_LCD_DATA22__I2C4_SCL 0x0120 0x0390 0x05EC 0x6 0x1 +#define MX7D_PAD_LCD_DATA23__LCD_DATA23 0x0124 0x0394 0x0694 0x0 0x2 +#define MX7D_PAD_LCD_DATA23__FLEXTIMER2_CH7 0x0124 0x0394 0x05C8 0x1 0x0 +#define MX7D_PAD_LCD_DATA23__ENET2_1588_EVENT3_OUT 0x0124 0x0394 0x0000 0x2 0x0 +#define MX7D_PAD_LCD_DATA23__CSI_DATA10 0x0124 0x0394 0x0000 0x3 0x0 +#define MX7D_PAD_LCD_DATA23__EIM_ADDR26 0x0124 0x0394 0x0000 0x4 0x0 +#define MX7D_PAD_LCD_DATA23__GPIO3_IO28 0x0124 0x0394 0x0000 0x5 0x0 +#define MX7D_PAD_LCD_DATA23__I2C4_SDA 0x0124 0x0394 0x05F0 0x6 0x1 +#define MX7D_PAD_UART1_RX_DATA__UART1_DCE_RX 0x0128 0x0398 0x0000 0x0 0x0 +#define MX7D_PAD_UART1_RX_DATA__UART1_DTE_TX 0x0128 0x0398 0x0000 0x0 0x0 +#define MX7D_PAD_UART1_RX_DATA__I2C1_SCL 0x0128 0x0398 0x05D4 0x1 0x0 +#define MX7D_PAD_UART1_RX_DATA__CCM_PMIC_READY 0x0128 0x0398 0x0000 0x2 0x0 +#define MX7D_PAD_UART1_RX_DATA__ECSPI1_SS1 0x0128 0x0398 0x0000 0x3 0x0 +#define MX7D_PAD_UART1_RX_DATA__ENET2_1588_EVENT0_IN 0x0128 0x0398 0x0000 0x4 0x0 +#define MX7D_PAD_UART1_RX_DATA__GPIO4_IO0 0x0128 0x0398 0x0000 0x5 0x0 +#define MX7D_PAD_UART1_RX_DATA__ENET1_MDIO 0x0128 0x0398 0x0000 0x6 0x0 +#define MX7D_PAD_UART1_TX_DATA__UART1_DCE_TX 0x012C 0x039C 0x0000 0x0 0x0 +#define MX7D_PAD_UART1_TX_DATA__UART1_DTE_RX 0x012C 0x039C 0x06F4 0x0 0x1 +#define MX7D_PAD_UART1_TX_DATA__I2C1_SDA 0x012C 0x039C 0x05D8 0x1 0x0 +#define MX7D_PAD_UART1_TX_DATA__SAI3_MCLK 0x012C 0x039C 0x0000 0x2 0x0 +#define MX7D_PAD_UART1_TX_DATA__ECSPI1_SS2 0x012C 0x039C 0x0000 0x3 0x0 +#define MX7D_PAD_UART1_TX_DATA__ENET2_1588_EVENT0_OUT 0x012C 0x039C 0x0000 0x4 0x0 +#define MX7D_PAD_UART1_TX_DATA__GPIO4_IO1 0x012C 0x039C 0x0000 0x5 0x0 +#define MX7D_PAD_UART1_TX_DATA__ENET1_MDC 0x012C 0x039C 0x0000 0x6 0x0 +#define MX7D_PAD_UART2_RX_DATA__UART2_DCE_RX 0x0130 0x03A0 0x0000 0x0 0x0 +#define MX7D_PAD_UART2_RX_DATA__UART2_DTE_TX 0x0130 0x03A0 0x0000 0x0 0x0 +#define MX7D_PAD_UART2_RX_DATA__I2C2_SCL 0x0130 0x03A0 0x05DC 0x1 0x0 +#define MX7D_PAD_UART2_RX_DATA__SAI3_RX_BCLK 0x0130 0x03A0 0x0000 0x2 0x0 +#define MX7D_PAD_UART2_RX_DATA__ECSPI1_SS3 0x0130 0x03A0 0x0000 0x3 0x0 +#define MX7D_PAD_UART2_RX_DATA__ENET2_1588_EVENT1_IN 0x0130 0x03A0 0x0000 0x4 0x0 +#define MX7D_PAD_UART2_RX_DATA__GPIO4_IO2 0x0130 0x03A0 0x0000 0x5 0x0 +#define MX7D_PAD_UART2_RX_DATA__ENET2_MDIO 0x0130 0x03A0 0x0000 0x6 0x0 +#define MX7D_PAD_UART2_TX_DATA__UART2_DCE_TX 0x0134 0x03A4 0x0000 0x0 0x0 +#define MX7D_PAD_UART2_TX_DATA__UART2_DTE_RX 0x0134 0x03A4 0x0000 0x0 0x0 +#define MX7D_PAD_UART2_TX_DATA__I2C2_SDA 0x0134 0x03A4 0x05E0 0x1 0x0 +#define MX7D_PAD_UART2_TX_DATA__SAI3_RX_DATA0 0x0134 0x03A4 0x06C8 0x2 0x0 +#define MX7D_PAD_UART2_TX_DATA__ECSPI1_RDY 0x0134 0x03A4 0x0000 0x3 0x0 +#define MX7D_PAD_UART2_TX_DATA__ENET2_1588_EVENT1_OUT 0x0134 0x03A4 0x0000 0x4 0x0 +#define MX7D_PAD_UART2_TX_DATA__GPIO4_IO3 0x0134 0x03A4 0x0000 0x5 0x0 +#define MX7D_PAD_UART2_TX_DATA__ENET2_MDC 0x0134 0x03A4 0x0000 0x6 0x0 +#define MX7D_PAD_UART3_RX_DATA__UART3_DCE_RX 0x0138 0x03A8 0x0704 0x0 0x2 +#define MX7D_PAD_UART3_RX_DATA__UART3_DTE_TX 0x0138 0x03A8 0x0000 0x0 0x0 +#define MX7D_PAD_UART3_RX_DATA__USB_OTG1_OC 0x0138 0x03A8 0x072C 0x1 0x0 +#define MX7D_PAD_UART3_RX_DATA__SAI3_RX_SYNC 0x0138 0x03A8 0x06CC 0x2 0x0 +#define MX7D_PAD_UART3_RX_DATA__ECSPI1_MISO 0x0138 0x03A8 0x0528 0x3 0x0 +#define MX7D_PAD_UART3_RX_DATA__ENET1_1588_EVENT0_IN 0x0138 0x03A8 0x0000 0x4 0x0 +#define MX7D_PAD_UART3_RX_DATA__GPIO4_IO4 0x0138 0x03A8 0x0000 0x5 0x0 +#define MX7D_PAD_UART3_RX_DATA__SD1_LCTL 0x0138 0x03A8 0x0000 0x6 0x0 +#define MX7D_PAD_UART3_TX_DATA__UART3_DCE_TX 0x013C 0x03AC 0x0000 0x0 0x0 +#define MX7D_PAD_UART3_TX_DATA__UART3_DTE_RX 0x013C 0x03AC 0x0704 0x0 0x3 +#define MX7D_PAD_UART3_TX_DATA__USB_OTG1_PWR 0x013C 0x03AC 0x0000 0x1 0x0 +#define MX7D_PAD_UART3_TX_DATA__SAI3_TX_BCLK 0x013C 0x03AC 0x06D0 0x2 0x0 +#define MX7D_PAD_UART3_TX_DATA__ECSPI1_MOSI 0x013C 0x03AC 0x052C 0x3 0x0 +#define MX7D_PAD_UART3_TX_DATA__ENET1_1588_EVENT0_OUT 0x013C 0x03AC 0x0000 0x4 0x0 +#define MX7D_PAD_UART3_TX_DATA__GPIO4_IO5 0x013C 0x03AC 0x0000 0x5 0x0 +#define MX7D_PAD_UART3_TX_DATA__SD2_LCTL 0x013C 0x03AC 0x0000 0x6 0x0 +#define MX7D_PAD_UART3_RTS_B__UART3_DCE_RTS 0x0140 0x03B0 0x0000 0x0 0x0 +#define MX7D_PAD_UART3_RTS_B__UART3_DTE_CTS 0x0140 0x03B0 0x0000 0x0 0x0 +#define MX7D_PAD_UART3_RTS_B__USB_OTG2_OC 0x0140 0x03B0 0x0728 0x1 0x0 +#define MX7D_PAD_UART3_RTS_B__SAI3_TX_DATA0 0x0140 0x03B0 0x0000 0x2 0x0 +#define MX7D_PAD_UART3_RTS_B__ECSPI1_SCLK 0x0140 0x03B0 0x0000 0x3 0x0 +#define MX7D_PAD_UART3_RTS_B__ENET1_1588_EVENT1_IN 0x0140 0x03B0 0x0000 0x4 0x0 +#define MX7D_PAD_UART3_RTS_B__GPIO4_IO6 0x0140 0x03B0 0x0000 0x5 0x0 +#define MX7D_PAD_UART3_RTS_B__SD3_LCTL 0x0140 0x03B0 0x0000 0x6 0x0 +#define MX7D_PAD_UART3_CTS_B__UART3_DCE_CTS 0x0144 0x03B4 0x0000 0x0 0x0 +#define MX7D_PAD_UART3_CTS_B__UART3_DTE_RTS 0x0144 0x03B4 0x0700 0x0 0x3 +#define MX7D_PAD_UART3_CTS_B__USB_OTG2_PWR 0x0144 0x03B4 0x0000 0x1 0x0 +#define MX7D_PAD_UART3_CTS_B__SAI3_TX_SYNC 0x0144 0x03B4 0x06D4 0x2 0x0 +#define MX7D_PAD_UART3_CTS_B__ECSPI1_SS0 0x0144 0x03B4 0x0530 0x3 0x0 +#define MX7D_PAD_UART3_CTS_B__ENET1_1588_EVENT1_OUT 0x0144 0x03B4 0x0000 0x4 0x0 +#define MX7D_PAD_UART3_CTS_B__GPIO4_IO7 0x0144 0x03B4 0x0000 0x5 0x0 +#define MX7D_PAD_UART3_CTS_B__SD1_VSELECT 0x0144 0x03B4 0x0000 0x6 0x0 +#define MX7D_PAD_I2C1_SCL__I2C1_SCL 0x0148 0x03B8 0x05D4 0x0 0x1 +#define MX7D_PAD_I2C1_SCL__UART4_DCE_CTS 0x0148 0x03B8 0x0000 0x1 0x0 +#define MX7D_PAD_I2C1_SCL__UART4_DTE_RTS 0x0148 0x03B8 0x0708 0x1 0x0 +#define MX7D_PAD_I2C1_SCL__FLEXCAN1_RX 0x0148 0x03B8 0x04DC 0x2 0x1 +#define MX7D_PAD_I2C1_SCL__ECSPI3_MISO 0x0148 0x03B8 0x0548 0x3 0x0 +#define MX7D_PAD_I2C1_SCL__GPIO4_IO8 0x0148 0x03B8 0x0000 0x5 0x0 +#define MX7D_PAD_I2C1_SCL__SD2_VSELECT 0x0148 0x03B8 0x0000 0x6 0x0 +#define MX7D_PAD_I2C1_SDA__I2C1_SDA 0x014C 0x03BC 0x05D8 0x0 0x1 +#define MX7D_PAD_I2C1_SDA__UART4_DCE_RTS 0x014C 0x03BC 0x0708 0x1 0x1 +#define MX7D_PAD_I2C1_SDA__UART4_DTE_CTS 0x014C 0x03BC 0x0000 0x1 0x0 +#define MX7D_PAD_I2C1_SDA__FLEXCAN1_TX 0x014C 0x03BC 0x0000 0x2 0x0 +#define MX7D_PAD_I2C1_SDA__ECSPI3_MOSI 0x014C 0x03BC 0x054C 0x3 0x0 +#define MX7D_PAD_I2C1_SDA__CCM_ENET_REF_CLK1 0x014C 0x03BC 0x0564 0x4 0x1 +#define MX7D_PAD_I2C1_SDA__GPIO4_IO9 0x014C 0x03BC 0x0000 0x5 0x0 +#define MX7D_PAD_I2C1_SDA__SD3_VSELECT 0x014C 0x03BC 0x0000 0x6 0x0 +#define MX7D_PAD_I2C2_SCL__I2C2_SCL 0x0150 0x03C0 0x05DC 0x0 0x1 +#define MX7D_PAD_I2C2_SCL__UART4_DCE_RX 0x0150 0x03C0 0x070C 0x1 0x0 +#define MX7D_PAD_I2C2_SCL__UART4_DTE_TX 0x0150 0x03C0 0x0000 0x1 0x0 +#define MX7D_PAD_I2C2_SCL__WDOG3_WDOG_B 0x0150 0x03C0 0x0000 0x2 0x0 +#define MX7D_PAD_I2C2_SCL__ECSPI3_SCLK 0x0150 0x03C0 0x0544 0x3 0x0 +#define MX7D_PAD_I2C2_SCL__CCM_ENET_REF_CLK2 0x0150 0x03C0 0x0570 0x4 0x2 +#define MX7D_PAD_I2C2_SCL__GPIO4_IO10 0x0150 0x03C0 0x0000 0x5 0x0 +#define MX7D_PAD_I2C2_SCL__SD3_CD_B 0x0150 0x03C0 0x0738 0x6 0x1 +#define MX7D_PAD_I2C2_SDA__I2C2_SDA 0x0154 0x03C4 0x05E0 0x0 0x1 +#define MX7D_PAD_I2C2_SDA__UART4_DCE_TX 0x0154 0x03C4 0x0000 0x1 0x0 +#define MX7D_PAD_I2C2_SDA__UART4_DTE_RX 0x0154 0x03C4 0x070C 0x1 0x1 +#define MX7D_PAD_I2C2_SDA__WDOG3_WDOG_RST_B_DEB 0x0154 0x03C4 0x0000 0x2 0x0 +#define MX7D_PAD_I2C2_SDA__ECSPI3_SS0 0x0154 0x03C4 0x0550 0x3 0x0 +#define MX7D_PAD_I2C2_SDA__CCM_ENET_REF_CLK3 0x0154 0x03C4 0x0000 0x4 0x0 +#define MX7D_PAD_I2C2_SDA__GPIO4_IO11 0x0154 0x03C4 0x0000 0x5 0x0 +#define MX7D_PAD_I2C2_SDA__SD3_WP 0x0154 0x03C4 0x073C 0x6 0x1 +#define MX7D_PAD_I2C3_SCL__I2C3_SCL 0x0158 0x03C8 0x05E4 0x0 0x2 +#define MX7D_PAD_I2C3_SCL__UART5_DCE_CTS 0x0158 0x03C8 0x0000 0x1 0x0 +#define MX7D_PAD_I2C3_SCL__UART5_DTE_RTS 0x0158 0x03C8 0x0710 0x1 0x0 +#define MX7D_PAD_I2C3_SCL__FLEXCAN2_RX 0x0158 0x03C8 0x04E0 0x2 0x1 +#define MX7D_PAD_I2C3_SCL__CSI_VSYNC 0x0158 0x03C8 0x0520 0x3 0x1 +#define MX7D_PAD_I2C3_SCL__SDMA_EXT_EVENT0 0x0158 0x03C8 0x06D8 0x4 0x1 +#define MX7D_PAD_I2C3_SCL__GPIO4_IO12 0x0158 0x03C8 0x0000 0x5 0x0 +#define MX7D_PAD_I2C3_SCL__EPDC_BDR0 0x0158 0x03C8 0x0000 0x6 0x0 +#define MX7D_PAD_I2C3_SDA__I2C3_SDA 0x015C 0x03CC 0x05E8 0x0 0x2 +#define MX7D_PAD_I2C3_SDA__UART5_DCE_RTS 0x015C 0x03CC 0x0710 0x1 0x1 +#define MX7D_PAD_I2C3_SDA__UART5_DTE_CTS 0x015C 0x03CC 0x0000 0x1 0x0 +#define MX7D_PAD_I2C3_SDA__FLEXCAN2_TX 0x015C 0x03CC 0x0000 0x2 0x0 +#define MX7D_PAD_I2C3_SDA__CSI_HSYNC 0x015C 0x03CC 0x0518 0x3 0x1 +#define MX7D_PAD_I2C3_SDA__SDMA_EXT_EVENT1 0x015C 0x03CC 0x06DC 0x4 0x1 +#define MX7D_PAD_I2C3_SDA__GPIO4_IO13 0x015C 0x03CC 0x0000 0x5 0x0 +#define MX7D_PAD_I2C3_SDA__EPDC_BDR1 0x015C 0x03CC 0x0000 0x6 0x0 +#define MX7D_PAD_I2C4_SCL__I2C4_SCL 0x0160 0x03D0 0x05EC 0x0 0x2 +#define MX7D_PAD_I2C4_SCL__UART5_DCE_RX 0x0160 0x03D0 0x0714 0x1 0x0 +#define MX7D_PAD_I2C4_SCL__UART5_DTE_TX 0x0160 0x03D0 0x0000 0x1 0x0 +#define MX7D_PAD_I2C4_SCL__WDOG4_WDOG_B 0x0160 0x03D0 0x0000 0x2 0x0 +#define MX7D_PAD_I2C4_SCL__CSI_PIXCLK 0x0160 0x03D0 0x051C 0x3 0x1 +#define MX7D_PAD_I2C4_SCL__USB_OTG1_ID 0x0160 0x03D0 0x0734 0x4 0x1 +#define MX7D_PAD_I2C4_SCL__GPIO4_IO14 0x0160 0x03D0 0x0000 0x5 0x0 +#define MX7D_PAD_I2C4_SCL__EPDC_VCOM0 0x0160 0x03D0 0x0000 0x6 0x0 +#define MX7D_PAD_I2C4_SDA__I2C4_SDA 0x0164 0x03D4 0x05F0 0x0 0x2 +#define MX7D_PAD_I2C4_SDA__UART5_DCE_TX 0x0164 0x03D4 0x0000 0x1 0x0 +#define MX7D_PAD_I2C4_SDA__UART5_DTE_RX 0x0164 0x03D4 0x0714 0x1 0x1 +#define MX7D_PAD_I2C4_SDA__WDOG4_WDOG_RST_B_DEB 0x0164 0x03D4 0x0000 0x2 0x0 +#define MX7D_PAD_I2C4_SDA__CSI_MCLK 0x0164 0x03D4 0x0000 0x3 0x0 +#define MX7D_PAD_I2C4_SDA__USB_OTG2_ID 0x0164 0x03D4 0x0730 0x4 0x1 +#define MX7D_PAD_I2C4_SDA__GPIO4_IO15 0x0164 0x03D4 0x0000 0x5 0x0 +#define MX7D_PAD_I2C4_SDA__EPDC_VCOM1 0x0164 0x03D4 0x0000 0x6 0x0 +#define MX7D_PAD_ECSPI1_SCLK__ECSPI1_SCLK 0x0168 0x03D8 0x0524 0x0 0x1 +#define MX7D_PAD_ECSPI1_SCLK__UART6_DCE_RX 0x0168 0x03D8 0x071C 0x1 0x2 +#define MX7D_PAD_ECSPI1_SCLK__UART6_DTE_TX 0x0168 0x03D8 0x0000 0x1 0x0 +#define MX7D_PAD_ECSPI1_SCLK__SD2_DATA4 0x0168 0x03D8 0x0000 0x2 0x0 +#define MX7D_PAD_ECSPI1_SCLK__CSI_DATA2 0x0168 0x03D8 0x04F8 0x3 0x1 +#define MX7D_PAD_ECSPI1_SCLK__GPIO4_IO16 0x0168 0x03D8 0x0000 0x5 0x0 +#define MX7D_PAD_ECSPI1_SCLK__EPDC_PWR_COM 0x0168 0x03D8 0x0000 0x6 0x0 +#define MX7D_PAD_ECSPI1_MOSI__ECSPI1_MOSI 0x016C 0x03DC 0x052C 0x0 0x1 +#define MX7D_PAD_ECSPI1_MOSI__UART6_DCE_TX 0x016C 0x03DC 0x0000 0x1 0x0 +#define MX7D_PAD_ECSPI1_MOSI__UART6_DTE_RX 0x016C 0x03DC 0x071C 0x1 0x3 +#define MX7D_PAD_ECSPI1_MOSI__SD2_DATA5 0x016C 0x03DC 0x0000 0x2 0x0 +#define MX7D_PAD_ECSPI1_MOSI__CSI_DATA3 0x016C 0x03DC 0x04FC 0x3 0x1 +#define MX7D_PAD_ECSPI1_MOSI__GPIO4_IO17 0x016C 0x03DC 0x0000 0x5 0x0 +#define MX7D_PAD_ECSPI1_MOSI__EPDC_PWR_STAT 0x016C 0x03DC 0x0580 0x6 0x1 +#define MX7D_PAD_ECSPI1_MISO__ECSPI1_MISO 0x0170 0x03E0 0x0528 0x0 0x1 +#define MX7D_PAD_ECSPI1_MISO__UART6_DCE_RTS 0x0170 0x03E0 0x0718 0x1 0x2 +#define MX7D_PAD_ECSPI1_MISO__UART6_DTE_CTS 0x0170 0x03E0 0x0000 0x1 0x0 +#define MX7D_PAD_ECSPI1_MISO__SD2_DATA6 0x0170 0x03E0 0x0000 0x2 0x0 +#define MX7D_PAD_ECSPI1_MISO__CSI_DATA4 0x0170 0x03E0 0x0500 0x3 0x1 +#define MX7D_PAD_ECSPI1_MISO__GPIO4_IO18 0x0170 0x03E0 0x0000 0x5 0x0 +#define MX7D_PAD_ECSPI1_MISO__EPDC_PWR_IRQ 0x0170 0x03E0 0x057C 0x6 0x0 +#define MX7D_PAD_ECSPI1_SS0__ECSPI1_SS0 0x0174 0x03E4 0x0530 0x0 0x1 +#define MX7D_PAD_ECSPI1_SS0__UART6_DCE_CTS 0x0174 0x03E4 0x0000 0x1 0x0 +#define MX7D_PAD_ECSPI1_SS0__UART6_DTE_RTS 0x0174 0x03E4 0x0718 0x1 0x3 +#define MX7D_PAD_ECSPI1_SS0__SD2_DATA7 0x0174 0x03E4 0x0000 0x2 0x0 +#define MX7D_PAD_ECSPI1_SS0__CSI_DATA5 0x0174 0x03E4 0x0504 0x3 0x1 +#define MX7D_PAD_ECSPI1_SS0__GPIO4_IO19 0x0174 0x03E4 0x0000 0x5 0x0 +#define MX7D_PAD_ECSPI1_SS0__EPDC_PWR_CTRL3 0x0174 0x03E4 0x0000 0x6 0x0 +#define MX7D_PAD_ECSPI2_SCLK__ECSPI2_SCLK 0x0178 0x03E8 0x0534 0x0 0x0 +#define MX7D_PAD_ECSPI2_SCLK__UART7_DCE_RX 0x0178 0x03E8 0x0724 0x1 0x2 +#define MX7D_PAD_ECSPI2_SCLK__UART7_DTE_TX 0x0178 0x03E8 0x0000 0x1 0x0 +#define MX7D_PAD_ECSPI2_SCLK__SD1_DATA4 0x0178 0x03E8 0x0000 0x2 0x0 +#define MX7D_PAD_ECSPI2_SCLK__CSI_DATA6 0x0178 0x03E8 0x0508 0x3 0x1 +#define MX7D_PAD_ECSPI2_SCLK__LCD_DATA13 0x0178 0x03E8 0x066C 0x4 0x2 +#define MX7D_PAD_ECSPI2_SCLK__GPIO4_IO20 0x0178 0x03E8 0x0000 0x5 0x0 +#define MX7D_PAD_ECSPI2_SCLK__EPDC_PWR_CTRL0 0x0178 0x03E8 0x0000 0x6 0x0 +#define MX7D_PAD_ECSPI2_MOSI__ECSPI2_MOSI 0x017C 0x03EC 0x053C 0x0 0x0 +#define MX7D_PAD_ECSPI2_MOSI__UART7_DCE_TX 0x017C 0x03EC 0x0000 0x1 0x0 +#define MX7D_PAD_ECSPI2_MOSI__UART7_DTE_RX 0x017C 0x03EC 0x0724 0x1 0x3 +#define MX7D_PAD_ECSPI2_MOSI__SD1_DATA5 0x017C 0x03EC 0x0000 0x2 0x0 +#define MX7D_PAD_ECSPI2_MOSI__CSI_DATA7 0x017C 0x03EC 0x050C 0x3 0x1 +#define MX7D_PAD_ECSPI2_MOSI__LCD_DATA14 0x017C 0x03EC 0x0670 0x4 0x2 +#define MX7D_PAD_ECSPI2_MOSI__GPIO4_IO21 0x017C 0x03EC 0x0000 0x5 0x0 +#define MX7D_PAD_ECSPI2_MOSI__EPDC_PWR_CTRL1 0x017C 0x03EC 0x0000 0x6 0x0 +#define MX7D_PAD_ECSPI2_MISO__GPIO4_IO22 0x0180 0x03F0 0x0000 0x5 0x0 +#define MX7D_PAD_ECSPI2_MISO__EPDC_PWR_CTRL2 0x0180 0x03F0 0x0000 0x6 0x0 +#define MX7D_PAD_ECSPI2_MISO__ECSPI2_MISO 0x0180 0x03F0 0x0538 0x0 0x0 +#define MX7D_PAD_ECSPI2_MISO__UART7_DCE_RTS 0x0180 0x03F0 0x0720 0x1 0x2 +#define MX7D_PAD_ECSPI2_MISO__UART7_DTE_CTS 0x0180 0x03F0 0x0000 0x1 0x0 +#define MX7D_PAD_ECSPI2_MISO__SD1_DATA6 0x0180 0x03F0 0x0000 0x2 0x0 +#define MX7D_PAD_ECSPI2_MISO__CSI_DATA8 0x0180 0x03F0 0x0510 0x3 0x1 +#define MX7D_PAD_ECSPI2_MISO__LCD_DATA15 0x0180 0x03F0 0x0674 0x4 0x2 +#define MX7D_PAD_ECSPI2_SS0__ECSPI2_SS0 0x0184 0x03F4 0x0540 0x0 0x0 +#define MX7D_PAD_ECSPI2_SS0__UART7_DCE_CTS 0x0184 0x03F4 0x0000 0x1 0x0 +#define MX7D_PAD_ECSPI2_SS0__UART7_DTE_RTS 0x0184 0x03F4 0x0720 0x1 0x3 +#define MX7D_PAD_ECSPI2_SS0__SD1_DATA7 0x0184 0x03F4 0x0000 0x2 0x0 +#define MX7D_PAD_ECSPI2_SS0__CSI_DATA9 0x0184 0x03F4 0x0514 0x3 0x1 +#define MX7D_PAD_ECSPI2_SS0__LCD_RESET 0x0184 0x03F4 0x0000 0x4 0x0 +#define MX7D_PAD_ECSPI2_SS0__GPIO4_IO23 0x0184 0x03F4 0x0000 0x5 0x0 +#define MX7D_PAD_ECSPI2_SS0__EPDC_PWR_WAKE 0x0184 0x03F4 0x0000 0x6 0x0 +#define MX7D_PAD_SD1_CD_B__SD1_CD_B 0x0188 0x03F8 0x0000 0x0 0x0 +#define MX7D_PAD_SD1_CD_B__UART6_DCE_RX 0x0188 0x03F8 0x071C 0x2 0x4 +#define MX7D_PAD_SD1_CD_B__UART6_DTE_TX 0x0188 0x03F8 0x0000 0x2 0x0 +#define MX7D_PAD_SD1_CD_B__ECSPI4_MISO 0x0188 0x03F8 0x0558 0x3 0x1 +#define MX7D_PAD_SD1_CD_B__FLEXTIMER1_CH0 0x0188 0x03F8 0x0584 0x4 0x1 +#define MX7D_PAD_SD1_CD_B__GPIO5_IO0 0x0188 0x03F8 0x0000 0x5 0x0 +#define MX7D_PAD_SD1_CD_B__CCM_CLKO1 0x0188 0x03F8 0x0000 0x6 0x0 +#define MX7D_PAD_SD1_WP__SD1_WP 0x018C 0x03FC 0x0000 0x0 0x0 +#define MX7D_PAD_SD1_WP__UART6_DCE_TX 0x018C 0x03FC 0x0000 0x2 0x0 +#define MX7D_PAD_SD1_WP__UART6_DTE_RX 0x018C 0x03FC 0x071C 0x2 0x5 +#define MX7D_PAD_SD1_WP__ECSPI4_MOSI 0x018C 0x03FC 0x055C 0x3 0x1 +#define MX7D_PAD_SD1_WP__FLEXTIMER1_CH1 0x018C 0x03FC 0x0588 0x4 0x1 +#define MX7D_PAD_SD1_WP__GPIO5_IO1 0x018C 0x03FC 0x0000 0x5 0x0 +#define MX7D_PAD_SD1_WP__CCM_CLKO2 0x018C 0x03FC 0x0000 0x6 0x0 +#define MX7D_PAD_SD1_RESET_B__SD1_RESET_B 0x0190 0x0400 0x0000 0x0 0x0 +#define MX7D_PAD_SD1_RESET_B__SAI3_MCLK 0x0190 0x0400 0x0000 0x1 0x0 +#define MX7D_PAD_SD1_RESET_B__UART6_DCE_RTS 0x0190 0x0400 0x0718 0x2 0x4 +#define MX7D_PAD_SD1_RESET_B__UART6_DTE_CTS 0x0190 0x0400 0x0000 0x2 0x0 +#define MX7D_PAD_SD1_RESET_B__ECSPI4_SCLK 0x0190 0x0400 0x0554 0x3 0x1 +#define MX7D_PAD_SD1_RESET_B__FLEXTIMER1_CH2 0x0190 0x0400 0x058C 0x4 0x1 +#define MX7D_PAD_SD1_RESET_B__GPIO5_IO2 0x0190 0x0400 0x0000 0x5 0x0 +#define MX7D_PAD_SD1_CLK__SD1_CLK 0x0194 0x0404 0x0000 0x0 0x0 +#define MX7D_PAD_SD1_CLK__SAI3_RX_SYNC 0x0194 0x0404 0x06CC 0x1 0x1 +#define MX7D_PAD_SD1_CLK__UART6_DCE_CTS 0x0194 0x0404 0x0000 0x2 0x0 +#define MX7D_PAD_SD1_CLK__UART6_DTE_RTS 0x0194 0x0404 0x0718 0x2 0x5 +#define MX7D_PAD_SD1_CLK__ECSPI4_SS0 0x0194 0x0404 0x0560 0x3 0x1 +#define MX7D_PAD_SD1_CLK__FLEXTIMER1_CH3 0x0194 0x0404 0x0590 0x4 0x1 +#define MX7D_PAD_SD1_CLK__GPIO5_IO3 0x0194 0x0404 0x0000 0x5 0x0 +#define MX7D_PAD_SD1_CMD__SD1_CMD 0x0198 0x0408 0x0000 0x0 0x0 +#define MX7D_PAD_SD1_CMD__SAI3_RX_BCLK 0x0198 0x0408 0x06C4 0x1 0x1 +#define MX7D_PAD_SD1_CMD__ECSPI4_SS1 0x0198 0x0408 0x0000 0x3 0x0 +#define MX7D_PAD_SD1_CMD__FLEXTIMER2_CH0 0x0198 0x0408 0x05AC 0x4 0x1 +#define MX7D_PAD_SD1_CMD__GPIO5_IO4 0x0198 0x0408 0x0000 0x5 0x0 +#define MX7D_PAD_SD1_DATA0__SD1_DATA0 0x019C 0x040C 0x0000 0x0 0x0 +#define MX7D_PAD_SD1_DATA0__SAI3_RX_DATA0 0x019C 0x040C 0x06C8 0x1 0x1 +#define MX7D_PAD_SD1_DATA0__UART7_DCE_RX 0x019C 0x040C 0x0724 0x2 0x4 +#define MX7D_PAD_SD1_DATA0__UART7_DTE_TX 0x019C 0x040C 0x0000 0x2 0x0 +#define MX7D_PAD_SD1_DATA0__ECSPI4_SS2 0x019C 0x040C 0x0000 0x3 0x0 +#define MX7D_PAD_SD1_DATA0__FLEXTIMER2_CH1 0x019C 0x040C 0x05B0 0x4 0x1 +#define MX7D_PAD_SD1_DATA0__GPIO5_IO5 0x019C 0x040C 0x0000 0x5 0x0 +#define MX7D_PAD_SD1_DATA0__CCM_EXT_CLK1 0x019C 0x040C 0x04E4 0x6 0x1 +#define MX7D_PAD_SD1_DATA1__SD1_DATA1 0x01A0 0x0410 0x0000 0x0 0x0 +#define MX7D_PAD_SD1_DATA1__SAI3_TX_BCLK 0x01A0 0x0410 0x06D0 0x1 0x1 +#define MX7D_PAD_SD1_DATA1__UART7_DCE_TX 0x01A0 0x0410 0x0000 0x2 0x0 +#define MX7D_PAD_SD1_DATA1__UART7_DTE_RX 0x01A0 0x0410 0x0724 0x2 0x5 +#define MX7D_PAD_SD1_DATA1__ECSPI4_SS3 0x01A0 0x0410 0x0000 0x3 0x0 +#define MX7D_PAD_SD1_DATA1__FLEXTIMER2_CH2 0x01A0 0x0410 0x05B4 0x4 0x1 +#define MX7D_PAD_SD1_DATA1__GPIO5_IO6 0x01A0 0x0410 0x0000 0x5 0x0 +#define MX7D_PAD_SD1_DATA1__CCM_EXT_CLK2 0x01A0 0x0410 0x04E8 0x6 0x1 +#define MX7D_PAD_SD1_DATA2__SD1_DATA2 0x01A4 0x0414 0x0000 0x0 0x0 +#define MX7D_PAD_SD1_DATA2__SAI3_TX_SYNC 0x01A4 0x0414 0x06D4 0x1 0x1 +#define MX7D_PAD_SD1_DATA2__UART7_DCE_CTS 0x01A4 0x0414 0x0000 0x2 0x0 +#define MX7D_PAD_SD1_DATA2__UART7_DTE_RTS 0x01A4 0x0414 0x0720 0x2 0x4 +#define MX7D_PAD_SD1_DATA2__ECSPI4_RDY 0x01A4 0x0414 0x0000 0x3 0x0 +#define MX7D_PAD_SD1_DATA2__FLEXTIMER2_CH3 0x01A4 0x0414 0x05B8 0x4 0x1 +#define MX7D_PAD_SD1_DATA2__GPIO5_IO7 0x01A4 0x0414 0x0000 0x5 0x0 +#define MX7D_PAD_SD1_DATA2__CCM_EXT_CLK3 0x01A4 0x0414 0x04EC 0x6 0x1 +#define MX7D_PAD_SD1_DATA3__SD1_DATA3 0x01A8 0x0418 0x0000 0x0 0x0 +#define MX7D_PAD_SD1_DATA3__SAI3_TX_DATA0 0x01A8 0x0418 0x0000 0x1 0x0 +#define MX7D_PAD_SD1_DATA3__UART7_DCE_RTS 0x01A8 0x0418 0x0720 0x2 0x5 +#define MX7D_PAD_SD1_DATA3__UART7_DTE_CTS 0x01A8 0x0418 0x0000 0x2 0x0 +#define MX7D_PAD_SD1_DATA3__ECSPI3_SS1 0x01A8 0x0418 0x0000 0x3 0x0 +#define MX7D_PAD_SD1_DATA3__FLEXTIMER1_PHA 0x01A8 0x0418 0x05A4 0x4 0x1 +#define MX7D_PAD_SD1_DATA3__GPIO5_IO8 0x01A8 0x0418 0x0000 0x5 0x0 +#define MX7D_PAD_SD1_DATA3__CCM_EXT_CLK4 0x01A8 0x0418 0x04F0 0x6 0x1 +#define MX7D_PAD_SD2_CD_B__SD2_CD_B 0x01AC 0x041C 0x0000 0x0 0x0 +#define MX7D_PAD_SD2_CD_B__ENET1_MDIO 0x01AC 0x041C 0x0568 0x1 0x2 +#define MX7D_PAD_SD2_CD_B__ENET2_MDIO 0x01AC 0x041C 0x0574 0x2 0x2 +#define MX7D_PAD_SD2_CD_B__ECSPI3_SS2 0x01AC 0x041C 0x0000 0x3 0x0 +#define MX7D_PAD_SD2_CD_B__FLEXTIMER1_PHB 0x01AC 0x041C 0x05A8 0x4 0x1 +#define MX7D_PAD_SD2_CD_B__GPIO5_IO9 0x01AC 0x041C 0x0000 0x5 0x0 +#define MX7D_PAD_SD2_CD_B__SDMA_EXT_EVENT0 0x01AC 0x041C 0x06D8 0x6 0x2 +#define MX7D_PAD_SD2_WP__SD2_WP 0x01B0 0x0420 0x0000 0x0 0x0 +#define MX7D_PAD_SD2_WP__ENET1_MDC 0x01B0 0x0420 0x0000 0x1 0x0 +#define MX7D_PAD_SD2_WP__ENET2_MDC 0x01B0 0x0420 0x0000 0x2 0x0 +#define MX7D_PAD_SD2_WP__ECSPI3_SS3 0x01B0 0x0420 0x0000 0x3 0x0 +#define MX7D_PAD_SD2_WP__USB_OTG1_ID 0x01B0 0x0420 0x0734 0x4 0x2 +#define MX7D_PAD_SD2_WP__GPIO5_IO10 0x01B0 0x0420 0x0000 0x5 0x0 +#define MX7D_PAD_SD2_WP__SDMA_EXT_EVENT1 0x01B0 0x0420 0x06DC 0x6 0x2 +#define MX7D_PAD_SD2_RESET_B__SD2_RESET_B 0x01B4 0x0424 0x0000 0x0 0x0 +#define MX7D_PAD_SD2_RESET_B__SAI2_MCLK 0x01B4 0x0424 0x0000 0x1 0x0 +#define MX7D_PAD_SD2_RESET_B__SD2_RESET 0x01B4 0x0424 0x0000 0x2 0x0 +#define MX7D_PAD_SD2_RESET_B__ECSPI3_RDY 0x01B4 0x0424 0x0000 0x3 0x0 +#define MX7D_PAD_SD2_RESET_B__USB_OTG2_ID 0x01B4 0x0424 0x0730 0x4 0x2 +#define MX7D_PAD_SD2_RESET_B__GPIO5_IO11 0x01B4 0x0424 0x0000 0x5 0x0 +#define MX7D_PAD_SD2_CLK__SD2_CLK 0x01B8 0x0428 0x0000 0x0 0x0 +#define MX7D_PAD_SD2_CLK__SAI2_RX_SYNC 0x01B8 0x0428 0x06B8 0x1 0x0 +#define MX7D_PAD_SD2_CLK__MQS_RIGHT 0x01B8 0x0428 0x0000 0x2 0x0 +#define MX7D_PAD_SD2_CLK__GPT4_CLK 0x01B8 0x0428 0x0000 0x3 0x0 +#define MX7D_PAD_SD2_CLK__GPIO5_IO12 0x01B8 0x0428 0x0000 0x5 0x0 +#define MX7D_PAD_SD2_CMD__SD2_CMD 0x01BC 0x042C 0x0000 0x0 0x0 +#define MX7D_PAD_SD2_CMD__SAI2_RX_BCLK 0x01BC 0x042C 0x06B0 0x1 0x0 +#define MX7D_PAD_SD2_CMD__MQS_LEFT 0x01BC 0x042C 0x0000 0x2 0x0 +#define MX7D_PAD_SD2_CMD__GPT4_CAPTURE1 0x01BC 0x042C 0x0000 0x3 0x0 +#define MX7D_PAD_SD2_CMD__SIM2_PORT1_TRXD 0x01BC 0x042C 0x06EC 0x4 0x1 +#define MX7D_PAD_SD2_CMD__GPIO5_IO13 0x01BC 0x042C 0x0000 0x5 0x0 +#define MX7D_PAD_SD2_DATA0__SD2_DATA0 0x01C0 0x0430 0x0000 0x0 0x0 +#define MX7D_PAD_SD2_DATA0__SAI2_RX_DATA0 0x01C0 0x0430 0x06B4 0x1 0x0 +#define MX7D_PAD_SD2_DATA0__UART4_DCE_RX 0x01C0 0x0430 0x070C 0x2 0x2 +#define MX7D_PAD_SD2_DATA0__UART4_DTE_TX 0x01C0 0x0430 0x0000 0x2 0x0 +#define MX7D_PAD_SD2_DATA0__GPT4_CAPTURE2 0x01C0 0x0430 0x0000 0x3 0x0 +#define MX7D_PAD_SD2_DATA0__SIM2_PORT1_CLK 0x01C0 0x0430 0x0000 0x4 0x0 +#define MX7D_PAD_SD2_DATA0__GPIO5_IO14 0x01C0 0x0430 0x0000 0x5 0x0 +#define MX7D_PAD_SD2_DATA1__SD2_DATA1 0x01C4 0x0434 0x0000 0x0 0x0 +#define MX7D_PAD_SD2_DATA1__SAI2_TX_BCLK 0x01C4 0x0434 0x06BC 0x1 0x0 +#define MX7D_PAD_SD2_DATA1__UART4_DCE_TX 0x01C4 0x0434 0x0000 0x2 0x0 +#define MX7D_PAD_SD2_DATA1__UART4_DTE_RX 0x01C4 0x0434 0x070C 0x2 0x3 +#define MX7D_PAD_SD2_DATA1__GPT4_COMPARE1 0x01C4 0x0434 0x0000 0x3 0x0 +#define MX7D_PAD_SD2_DATA1__SIM2_PORT1_RST_B 0x01C4 0x0434 0x0000 0x4 0x0 +#define MX7D_PAD_SD2_DATA1__GPIO5_IO15 0x01C4 0x0434 0x0000 0x5 0x0 +#define MX7D_PAD_SD2_DATA2__SD2_DATA2 0x01C8 0x0438 0x0000 0x0 0x0 +#define MX7D_PAD_SD2_DATA2__SAI2_TX_SYNC 0x01C8 0x0438 0x06C0 0x1 0x0 +#define MX7D_PAD_SD2_DATA2__UART4_DCE_CTS 0x01C8 0x0438 0x0000 0x2 0x0 +#define MX7D_PAD_SD2_DATA2__UART4_DTE_RTS 0x01C8 0x0438 0x0708 0x2 0x2 +#define MX7D_PAD_SD2_DATA2__GPT4_COMPARE2 0x01C8 0x0438 0x0000 0x3 0x0 +#define MX7D_PAD_SD2_DATA2__SIM2_PORT1_SVEN 0x01C8 0x0438 0x0000 0x4 0x0 +#define MX7D_PAD_SD2_DATA2__GPIO5_IO16 0x01C8 0x0438 0x0000 0x5 0x0 +#define MX7D_PAD_SD2_DATA3__SD2_DATA3 0x01CC 0x043C 0x0000 0x0 0x0 +#define MX7D_PAD_SD2_DATA3__SAI2_TX_DATA0 0x01CC 0x043C 0x0000 0x1 0x0 +#define MX7D_PAD_SD2_DATA3__UART4_DCE_RTS 0x01CC 0x043C 0x0708 0x2 0x3 +#define MX7D_PAD_SD2_DATA3__UART4_DTE_CTS 0x01CC 0x043C 0x0000 0x2 0x0 +#define MX7D_PAD_SD2_DATA3__GPT4_COMPARE3 0x01CC 0x043C 0x0000 0x3 0x0 +#define MX7D_PAD_SD2_DATA3__SIM2_PORT1_PD 0x01CC 0x043C 0x06E8 0x4 0x1 +#define MX7D_PAD_SD2_DATA3__GPIO5_IO17 0x01CC 0x043C 0x0000 0x5 0x0 +#define MX7D_PAD_SD3_CLK__SD3_CLK 0x01D0 0x0440 0x0000 0x0 0x0 +#define MX7D_PAD_SD3_CLK__NAND_CLE 0x01D0 0x0440 0x0000 0x1 0x0 +#define MX7D_PAD_SD3_CLK__ECSPI4_MISO 0x01D0 0x0440 0x0558 0x2 0x2 +#define MX7D_PAD_SD3_CLK__SAI3_RX_SYNC 0x01D0 0x0440 0x06CC 0x3 0x2 +#define MX7D_PAD_SD3_CLK__GPT3_CLK 0x01D0 0x0440 0x0000 0x4 0x0 +#define MX7D_PAD_SD3_CLK__GPIO6_IO0 0x01D0 0x0440 0x0000 0x5 0x0 +#define MX7D_PAD_SD3_CMD__SD3_CMD 0x01D4 0x0444 0x0000 0x0 0x0 +#define MX7D_PAD_SD3_CMD__NAND_ALE 0x01D4 0x0444 0x0000 0x1 0x0 +#define MX7D_PAD_SD3_CMD__ECSPI4_MOSI 0x01D4 0x0444 0x055C 0x2 0x2 +#define MX7D_PAD_SD3_CMD__SAI3_RX_BCLK 0x01D4 0x0444 0x06C4 0x3 0x2 +#define MX7D_PAD_SD3_CMD__GPT3_CAPTURE1 0x01D4 0x0444 0x0000 0x4 0x0 +#define MX7D_PAD_SD3_CMD__GPIO6_IO1 0x01D4 0x0444 0x0000 0x5 0x0 +#define MX7D_PAD_SD3_DATA0__SD3_DATA0 0x01D8 0x0448 0x0000 0x0 0x0 +#define MX7D_PAD_SD3_DATA0__NAND_DATA00 0x01D8 0x0448 0x0000 0x1 0x0 +#define MX7D_PAD_SD3_DATA0__ECSPI4_SS0 0x01D8 0x0448 0x0560 0x2 0x2 +#define MX7D_PAD_SD3_DATA0__SAI3_RX_DATA0 0x01D8 0x0448 0x06C8 0x3 0x2 +#define MX7D_PAD_SD3_DATA0__GPT3_CAPTURE2 0x01D8 0x0448 0x0000 0x4 0x0 +#define MX7D_PAD_SD3_DATA0__GPIO6_IO2 0x01D8 0x0448 0x0000 0x5 0x0 +#define MX7D_PAD_SD3_DATA1__SD3_DATA1 0x01DC 0x044C 0x0000 0x0 0x0 +#define MX7D_PAD_SD3_DATA1__NAND_DATA01 0x01DC 0x044C 0x0000 0x1 0x0 +#define MX7D_PAD_SD3_DATA1__ECSPI4_SCLK 0x01DC 0x044C 0x0554 0x2 0x2 +#define MX7D_PAD_SD3_DATA1__SAI3_TX_BCLK 0x01DC 0x044C 0x06D0 0x3 0x2 +#define MX7D_PAD_SD3_DATA1__GPT3_COMPARE1 0x01DC 0x044C 0x0000 0x4 0x0 +#define MX7D_PAD_SD3_DATA1__GPIO6_IO3 0x01DC 0x044C 0x0000 0x5 0x0 +#define MX7D_PAD_SD3_DATA2__SD3_DATA2 0x01E0 0x0450 0x0000 0x0 0x0 +#define MX7D_PAD_SD3_DATA2__NAND_DATA02 0x01E0 0x0450 0x0000 0x1 0x0 +#define MX7D_PAD_SD3_DATA2__I2C3_SDA 0x01E0 0x0450 0x05E8 0x2 0x3 +#define MX7D_PAD_SD3_DATA2__SAI3_TX_SYNC 0x01E0 0x0450 0x06D4 0x3 0x2 +#define MX7D_PAD_SD3_DATA2__GPT3_COMPARE2 0x01E0 0x0450 0x0000 0x4 0x0 +#define MX7D_PAD_SD3_DATA2__GPIO6_IO4 0x01E0 0x0450 0x0000 0x5 0x0 +#define MX7D_PAD_SD3_DATA3__SD3_DATA3 0x01E4 0x0454 0x0000 0x0 0x0 +#define MX7D_PAD_SD3_DATA3__NAND_DATA03 0x01E4 0x0454 0x0000 0x1 0x0 +#define MX7D_PAD_SD3_DATA3__I2C3_SCL 0x01E4 0x0454 0x05E4 0x2 0x3 +#define MX7D_PAD_SD3_DATA3__SAI3_TX_DATA0 0x01E4 0x0454 0x0000 0x3 0x0 +#define MX7D_PAD_SD3_DATA3__GPT3_COMPARE3 0x01E4 0x0454 0x0000 0x4 0x0 +#define MX7D_PAD_SD3_DATA3__GPIO6_IO5 0x01E4 0x0454 0x0000 0x5 0x0 +#define MX7D_PAD_SD3_DATA4__SD3_DATA4 0x01E8 0x0458 0x0000 0x0 0x0 +#define MX7D_PAD_SD3_DATA4__NAND_DATA04 0x01E8 0x0458 0x0000 0x1 0x0 +#define MX7D_PAD_SD3_DATA4__UART3_DCE_RX 0x01E8 0x0458 0x0704 0x3 0x4 +#define MX7D_PAD_SD3_DATA4__UART3_DTE_TX 0x01E8 0x0458 0x0000 0x3 0x0 +#define MX7D_PAD_SD3_DATA4__FLEXCAN2_RX 0x01E8 0x0458 0x04E0 0x4 0x2 +#define MX7D_PAD_SD3_DATA4__GPIO6_IO6 0x01E8 0x0458 0x0000 0x5 0x0 +#define MX7D_PAD_SD3_DATA5__SD3_DATA5 0x01EC 0x045C 0x0000 0x0 0x0 +#define MX7D_PAD_SD3_DATA5__NAND_DATA05 0x01EC 0x045C 0x0000 0x1 0x0 +#define MX7D_PAD_SD3_DATA5__UART3_DCE_TX 0x01EC 0x045C 0x0000 0x3 0x0 +#define MX7D_PAD_SD3_DATA5__UART3_DTE_RX 0x01EC 0x045C 0x0704 0x3 0x5 +#define MX7D_PAD_SD3_DATA5__FLEXCAN1_TX 0x01EC 0x045C 0x0000 0x4 0x0 +#define MX7D_PAD_SD3_DATA5__GPIO6_IO7 0x01EC 0x045C 0x0000 0x5 0x0 +#define MX7D_PAD_SD3_DATA6__SD3_DATA6 0x01F0 0x0460 0x0000 0x0 0x0 +#define MX7D_PAD_SD3_DATA6__NAND_DATA06 0x01F0 0x0460 0x0000 0x1 0x0 +#define MX7D_PAD_SD3_DATA6__SD3_WP 0x01F0 0x0460 0x073C 0x2 0x2 +#define MX7D_PAD_SD3_DATA6__UART3_DCE_RTS 0x01F0 0x0460 0x0700 0x3 0x4 +#define MX7D_PAD_SD3_DATA6__UART3_DTE_CTS 0x01F0 0x0460 0x0000 0x3 0x0 +#define MX7D_PAD_SD3_DATA6__FLEXCAN2_TX 0x01F0 0x0460 0x0000 0x4 0x0 +#define MX7D_PAD_SD3_DATA6__GPIO6_IO8 0x01F0 0x0460 0x0000 0x5 0x0 +#define MX7D_PAD_SD3_DATA7__SD3_DATA7 0x01F4 0x0464 0x0000 0x0 0x0 +#define MX7D_PAD_SD3_DATA7__NAND_DATA07 0x01F4 0x0464 0x0000 0x1 0x0 +#define MX7D_PAD_SD3_DATA7__SD3_CD_B 0x01F4 0x0464 0x0738 0x2 0x2 +#define MX7D_PAD_SD3_DATA7__UART3_DCE_CTS 0x01F4 0x0464 0x0000 0x3 0x0 +#define MX7D_PAD_SD3_DATA7__UART3_DTE_RTS 0x01F4 0x0464 0x0700 0x3 0x5 +#define MX7D_PAD_SD3_DATA7__FLEXCAN1_RX 0x01F4 0x0464 0x04DC 0x4 0x2 +#define MX7D_PAD_SD3_DATA7__GPIO6_IO9 0x01F4 0x0464 0x0000 0x5 0x0 +#define MX7D_PAD_SD3_STROBE__SD3_STROBE 0x01F8 0x0468 0x0000 0x0 0x0 +#define MX7D_PAD_SD3_STROBE__NAND_RE_B 0x01F8 0x0468 0x0000 0x1 0x0 +#define MX7D_PAD_SD3_STROBE__GPIO6_IO10 0x01F8 0x0468 0x0000 0x5 0x0 +#define MX7D_PAD_SD3_RESET_B__SD3_RESET_B 0x01FC 0x046C 0x0000 0x0 0x0 +#define MX7D_PAD_SD3_RESET_B__NAND_WE_B 0x01FC 0x046C 0x0000 0x1 0x0 +#define MX7D_PAD_SD3_RESET_B__SD3_RESET 0x01FC 0x046C 0x0000 0x2 0x0 +#define MX7D_PAD_SD3_RESET_B__SAI3_MCLK 0x01FC 0x046C 0x0000 0x3 0x0 +#define MX7D_PAD_SD3_RESET_B__GPIO6_IO11 0x01FC 0x046C 0x0000 0x5 0x0 +#define MX7D_PAD_SAI1_RX_DATA__SAI1_RX_DATA0 0x0200 0x0470 0x06A0 0x0 0x0 +#define MX7D_PAD_SAI1_RX_DATA__NAND_CE1_B 0x0200 0x0470 0x0000 0x1 0x0 +#define MX7D_PAD_SAI1_RX_DATA__UART5_DCE_RX 0x0200 0x0470 0x0714 0x2 0x2 +#define MX7D_PAD_SAI1_RX_DATA__UART5_DTE_TX 0x0200 0x0470 0x0000 0x2 0x0 +#define MX7D_PAD_SAI1_RX_DATA__FLEXCAN1_RX 0x0200 0x0470 0x04DC 0x3 0x3 +#define MX7D_PAD_SAI1_RX_DATA__SIM1_PORT1_TRXD 0x0200 0x0470 0x06E4 0x4 0x1 +#define MX7D_PAD_SAI1_RX_DATA__GPIO6_IO12 0x0200 0x0470 0x0000 0x5 0x0 +#define MX7D_PAD_SAI1_RX_DATA__SRC_ANY_PU_RESET 0x0200 0x0470 0x0000 0x7 0x0 +#define MX7D_PAD_SAI1_TX_BCLK__SAI1_TX_BCLK 0x0204 0x0474 0x06A8 0x0 0x0 +#define MX7D_PAD_SAI1_TX_BCLK__NAND_CE0_B 0x0204 0x0474 0x0000 0x1 0x0 +#define MX7D_PAD_SAI1_TX_BCLK__UART5_DCE_TX 0x0204 0x0474 0x0000 0x2 0x0 +#define MX7D_PAD_SAI1_TX_BCLK__UART5_DTE_RX 0x0204 0x0474 0x0714 0x2 0x3 +#define MX7D_PAD_SAI1_TX_BCLK__FLEXCAN1_TX 0x0204 0x0474 0x0000 0x3 0x0 +#define MX7D_PAD_SAI1_TX_BCLK__SIM1_PORT1_CLK 0x0204 0x0474 0x0000 0x4 0x0 +#define MX7D_PAD_SAI1_TX_BCLK__GPIO6_IO13 0x0204 0x0474 0x0000 0x5 0x0 +#define MX7D_PAD_SAI1_TX_BCLK__SRC_EARLY_RESET 0x0204 0x0474 0x0000 0x7 0x0 +#define MX7D_PAD_SAI1_TX_SYNC__SAI1_TX_SYNC 0x0208 0x0478 0x06AC 0x0 0x0 +#define MX7D_PAD_SAI1_TX_SYNC__NAND_DQS 0x0208 0x0478 0x0000 0x1 0x0 +#define MX7D_PAD_SAI1_TX_SYNC__UART5_DCE_CTS 0x0208 0x0478 0x0000 0x2 0x0 +#define MX7D_PAD_SAI1_TX_SYNC__UART5_DTE_RTS 0x0208 0x0478 0x0710 0x2 0x2 +#define MX7D_PAD_SAI1_TX_SYNC__FLEXCAN2_RX 0x0208 0x0478 0x04E0 0x3 0x3 +#define MX7D_PAD_SAI1_TX_SYNC__SIM1_PORT1_RST_B 0x0208 0x0478 0x0000 0x4 0x0 +#define MX7D_PAD_SAI1_TX_SYNC__GPIO6_IO14 0x0208 0x0478 0x0000 0x5 0x0 +#define MX7D_PAD_SAI1_TX_SYNC__SRC_INT_BOOT 0x0208 0x0478 0x0000 0x7 0x0 +#define MX7D_PAD_SAI1_TX_DATA__SAI1_TX_DATA0 0x020C 0x047C 0x0000 0x0 0x0 +#define MX7D_PAD_SAI1_TX_DATA__NAND_READY_B 0x020C 0x047C 0x0000 0x1 0x0 +#define MX7D_PAD_SAI1_TX_DATA__UART5_DCE_RTS 0x020C 0x047C 0x0710 0x2 0x3 +#define MX7D_PAD_SAI1_TX_DATA__UART5_DTE_CTS 0x020C 0x047C 0x0000 0x2 0x0 +#define MX7D_PAD_SAI1_TX_DATA__FLEXCAN2_TX 0x020C 0x047C 0x0000 0x3 0x0 +#define MX7D_PAD_SAI1_TX_DATA__SIM1_PORT1_SVEN 0x020C 0x047C 0x0000 0x4 0x0 +#define MX7D_PAD_SAI1_TX_DATA__GPIO6_IO15 0x020C 0x047C 0x0000 0x5 0x0 +#define MX7D_PAD_SAI1_TX_DATA__SRC_SYSTEM_RESET 0x020C 0x047C 0x0000 0x7 0x0 +#define MX7D_PAD_SAI1_RX_SYNC__SAI1_RX_SYNC 0x0210 0x0480 0x06A4 0x0 0x0 +#define MX7D_PAD_SAI1_RX_SYNC__NAND_CE2_B 0x0210 0x0480 0x0000 0x1 0x0 +#define MX7D_PAD_SAI1_RX_SYNC__SAI2_RX_SYNC 0x0210 0x0480 0x06B8 0x2 0x1 +#define MX7D_PAD_SAI1_RX_SYNC__I2C4_SCL 0x0210 0x0480 0x05EC 0x3 0x3 +#define MX7D_PAD_SAI1_RX_SYNC__SIM1_PORT1_PD 0x0210 0x0480 0x06E0 0x4 0x1 +#define MX7D_PAD_SAI1_RX_SYNC__GPIO6_IO16 0x0210 0x0480 0x0000 0x5 0x0 +#define MX7D_PAD_SAI1_RX_SYNC__MQS_RIGHT 0x0210 0x0480 0x0000 0x6 0x0 +#define MX7D_PAD_SAI1_RX_SYNC__SRC_CA7_RESET_B0 0x0210 0x0480 0x0000 0x7 0x0 +#define MX7D_PAD_SAI1_RX_BCLK__SAI1_RX_BCLK 0x0214 0x0484 0x069C 0x0 0x0 +#define MX7D_PAD_SAI1_RX_BCLK__NAND_CE3_B 0x0214 0x0484 0x0000 0x1 0x0 +#define MX7D_PAD_SAI1_RX_BCLK__SAI2_RX_BCLK 0x0214 0x0484 0x06B0 0x2 0x1 +#define MX7D_PAD_SAI1_RX_BCLK__I2C4_SDA 0x0214 0x0484 0x05F0 0x3 0x3 +#define MX7D_PAD_SAI1_RX_BCLK__FLEXTIMER2_PHA 0x0214 0x0484 0x05CC 0x4 0x1 +#define MX7D_PAD_SAI1_RX_BCLK__GPIO6_IO17 0x0214 0x0484 0x0000 0x5 0x0 +#define MX7D_PAD_SAI1_RX_BCLK__MQS_LEFT 0x0214 0x0484 0x0000 0x6 0x0 +#define MX7D_PAD_SAI1_RX_BCLK__SRC_CA7_RESET_B1 0x0214 0x0484 0x0000 0x7 0x0 +#define MX7D_PAD_SAI1_MCLK__SAI1_MCLK 0x0218 0x0488 0x0000 0x0 0x0 +#define MX7D_PAD_SAI1_MCLK__NAND_WP_B 0x0218 0x0488 0x0000 0x1 0x0 +#define MX7D_PAD_SAI1_MCLK__SAI2_MCLK 0x0218 0x0488 0x0000 0x2 0x0 +#define MX7D_PAD_SAI1_MCLK__CCM_PMIC_READY 0x0218 0x0488 0x04F4 0x3 0x3 +#define MX7D_PAD_SAI1_MCLK__FLEXTIMER2_PHB 0x0218 0x0488 0x05D0 0x4 0x1 +#define MX7D_PAD_SAI1_MCLK__GPIO6_IO18 0x0218 0x0488 0x0000 0x5 0x0 +#define MX7D_PAD_SAI1_MCLK__SRC_TESTER_ACK 0x0218 0x0488 0x0000 0x7 0x0 +#define MX7D_PAD_SAI2_TX_SYNC__SAI2_TX_SYNC 0x021C 0x048C 0x06C0 0x0 0x1 +#define MX7D_PAD_SAI2_TX_SYNC__ECSPI3_MISO 0x021C 0x048C 0x0548 0x1 0x1 +#define MX7D_PAD_SAI2_TX_SYNC__UART4_DCE_RX 0x021C 0x048C 0x070C 0x2 0x4 +#define MX7D_PAD_SAI2_TX_SYNC__UART4_DTE_TX 0x021C 0x048C 0x0000 0x2 0x0 +#define MX7D_PAD_SAI2_TX_SYNC__UART1_DCE_CTS 0x021C 0x048C 0x0000 0x3 0x0 +#define MX7D_PAD_SAI2_TX_SYNC__UART1_DTE_RTS 0x021C 0x048C 0x06F0 0x3 0x0 +#define MX7D_PAD_SAI2_TX_SYNC__FLEXTIMER2_CH4 0x021C 0x048C 0x05BC 0x4 0x1 +#define MX7D_PAD_SAI2_TX_SYNC__GPIO6_IO19 0x021C 0x048C 0x0000 0x5 0x0 +#define MX7D_PAD_SAI2_TX_BCLK__SAI2_TX_BCLK 0x0220 0x0490 0x06BC 0x0 0x1 +#define MX7D_PAD_SAI2_TX_BCLK__ECSPI3_MOSI 0x0220 0x0490 0x054C 0x1 0x1 +#define MX7D_PAD_SAI2_TX_BCLK__UART4_DCE_TX 0x0220 0x0490 0x0000 0x2 0x0 +#define MX7D_PAD_SAI2_TX_BCLK__UART4_DTE_RX 0x0220 0x0490 0x070C 0x2 0x5 +#define MX7D_PAD_SAI2_TX_BCLK__UART1_DCE_RTS 0x0220 0x0490 0x06F0 0x3 0x1 +#define MX7D_PAD_SAI2_TX_BCLK__UART1_DTE_CTS 0x0220 0x0490 0x0000 0x3 0x0 +#define MX7D_PAD_SAI2_TX_BCLK__FLEXTIMER2_CH5 0x0220 0x0490 0x05C0 0x4 0x1 +#define MX7D_PAD_SAI2_TX_BCLK__GPIO6_IO20 0x0220 0x0490 0x0000 0x5 0x0 +#define MX7D_PAD_SAI2_RX_DATA__SAI2_RX_DATA0 0x0224 0x0494 0x06B4 0x0 0x1 +#define MX7D_PAD_SAI2_RX_DATA__ECSPI3_SCLK 0x0224 0x0494 0x0544 0x1 0x1 +#define MX7D_PAD_SAI2_RX_DATA__UART4_DCE_CTS 0x0224 0x0494 0x0000 0x2 0x0 +#define MX7D_PAD_SAI2_RX_DATA__UART4_DTE_RTS 0x0224 0x0494 0x0708 0x2 0x4 +#define MX7D_PAD_SAI2_RX_DATA__UART2_DCE_CTS 0x0224 0x0494 0x0000 0x3 0x0 +#define MX7D_PAD_SAI2_RX_DATA__UART2_DTE_RTS 0x0224 0x0494 0x06F8 0x3 0x2 +#define MX7D_PAD_SAI2_RX_DATA__FLEXTIMER2_CH6 0x0224 0x0494 0x05C4 0x4 0x1 +#define MX7D_PAD_SAI2_RX_DATA__GPIO6_IO21 0x0224 0x0494 0x0000 0x5 0x0 +#define MX7D_PAD_SAI2_RX_DATA__KPP_COL7 0x0224 0x0494 0x0610 0x6 0x1 +#define MX7D_PAD_SAI2_TX_DATA__SAI2_TX_DATA0 0x0228 0x0498 0x0000 0x0 0x0 +#define MX7D_PAD_SAI2_TX_DATA__ECSPI3_SS0 0x0228 0x0498 0x0550 0x1 0x1 +#define MX7D_PAD_SAI2_TX_DATA__UART4_DCE_RTS 0x0228 0x0498 0x0708 0x2 0x5 +#define MX7D_PAD_SAI2_TX_DATA__UART4_DTE_CTS 0x0228 0x0498 0x0000 0x2 0x0 +#define MX7D_PAD_SAI2_TX_DATA__UART2_DCE_RTS 0x0228 0x0498 0x06F8 0x3 0x3 +#define MX7D_PAD_SAI2_TX_DATA__UART2_DTE_CTS 0x0228 0x0498 0x0000 0x3 0x0 +#define MX7D_PAD_SAI2_TX_DATA__FLEXTIMER2_CH7 0x0228 0x0498 0x05C8 0x4 0x1 +#define MX7D_PAD_SAI2_TX_DATA__GPIO6_IO22 0x0228 0x0498 0x0000 0x5 0x0 +#define MX7D_PAD_SAI2_TX_DATA__KPP_ROW7 0x0228 0x0498 0x0630 0x6 0x1 +#define MX7D_PAD_ENET1_RGMII_RD0__ENET1_RGMII_RD0 0x022C 0x049C 0x0000 0x0 0x0 +#define MX7D_PAD_ENET1_RGMII_RD0__PWM1_OUT 0x022C 0x049C 0x0000 0x1 0x0 +#define MX7D_PAD_ENET1_RGMII_RD0__I2C3_SCL 0x022C 0x049C 0x05E4 0x2 0x4 +#define MX7D_PAD_ENET1_RGMII_RD0__UART1_DCE_CTS 0x022C 0x049C 0x0000 0x3 0x0 +#define MX7D_PAD_ENET1_RGMII_RD0__UART1_DTE_RTS 0x022C 0x049C 0x06F0 0x3 0x2 +#define MX7D_PAD_ENET1_RGMII_RD0__EPDC_VCOM0 0x022C 0x049C 0x0000 0x4 0x0 +#define MX7D_PAD_ENET1_RGMII_RD0__GPIO7_IO0 0x022C 0x049C 0x0000 0x5 0x0 +#define MX7D_PAD_ENET1_RGMII_RD0__KPP_ROW3 0x022C 0x049C 0x0620 0x6 0x1 +#define MX7D_PAD_ENET1_RGMII_RD1__ENET1_RGMII_RD1 0x0230 0x04A0 0x0000 0x0 0x0 +#define MX7D_PAD_ENET1_RGMII_RD1__PWM2_OUT 0x0230 0x04A0 0x0000 0x1 0x0 +#define MX7D_PAD_ENET1_RGMII_RD1__I2C3_SDA 0x0230 0x04A0 0x05E8 0x2 0x4 +#define MX7D_PAD_ENET1_RGMII_RD1__UART1_DCE_RTS 0x0230 0x04A0 0x06F0 0x3 0x3 +#define MX7D_PAD_ENET1_RGMII_RD1__UART1_DTE_CTS 0x0230 0x04A0 0x0000 0x3 0x0 +#define MX7D_PAD_ENET1_RGMII_RD1__EPDC_VCOM1 0x0230 0x04A0 0x0000 0x4 0x0 +#define MX7D_PAD_ENET1_RGMII_RD1__GPIO7_IO1 0x0230 0x04A0 0x0000 0x5 0x0 +#define MX7D_PAD_ENET1_RGMII_RD1__KPP_COL3 0x0230 0x04A0 0x0600 0x6 0x1 +#define MX7D_PAD_ENET1_RGMII_RD2__ENET1_RGMII_RD2 0x0234 0x04A4 0x0000 0x0 0x0 +#define MX7D_PAD_ENET1_RGMII_RD2__FLEXCAN1_RX 0x0234 0x04A4 0x04DC 0x1 0x4 +#define MX7D_PAD_ENET1_RGMII_RD2__ECSPI2_SCLK 0x0234 0x04A4 0x0534 0x2 0x1 +#define MX7D_PAD_ENET1_RGMII_RD2__UART1_DCE_RX 0x0234 0x04A4 0x06F4 0x3 0x2 +#define MX7D_PAD_ENET1_RGMII_RD2__UART1_DTE_TX 0x0234 0x04A4 0x0000 0x3 0x0 +#define MX7D_PAD_ENET1_RGMII_RD2__EPDC_SDCE4 0x0234 0x04A4 0x0000 0x4 0x0 +#define MX7D_PAD_ENET1_RGMII_RD2__GPIO7_IO2 0x0234 0x04A4 0x0000 0x5 0x0 +#define MX7D_PAD_ENET1_RGMII_RD2__KPP_ROW2 0x0234 0x04A4 0x061C 0x6 0x1 +#define MX7D_PAD_ENET1_RGMII_RD3__ENET1_RGMII_RD3 0x0238 0x04A8 0x0000 0x0 0x0 +#define MX7D_PAD_ENET1_RGMII_RD3__FLEXCAN1_TX 0x0238 0x04A8 0x0000 0x1 0x0 +#define MX7D_PAD_ENET1_RGMII_RD3__ECSPI2_MOSI 0x0238 0x04A8 0x053C 0x2 0x1 +#define MX7D_PAD_ENET1_RGMII_RD3__UART1_DCE_TX 0x0238 0x04A8 0x0000 0x3 0x0 +#define MX7D_PAD_ENET1_RGMII_RD3__UART1_DTE_RX 0x0238 0x04A8 0x06F4 0x3 0x3 +#define MX7D_PAD_ENET1_RGMII_RD3__EPDC_SDCE5 0x0238 0x04A8 0x0000 0x4 0x0 +#define MX7D_PAD_ENET1_RGMII_RD3__GPIO7_IO3 0x0238 0x04A8 0x0000 0x5 0x0 +#define MX7D_PAD_ENET1_RGMII_RD3__KPP_COL2 0x0238 0x04A8 0x05FC 0x6 0x1 +#define MX7D_PAD_ENET1_RGMII_RX_CTL__ENET1_RGMII_RX_CTL 0x023C 0x04AC 0x0000 0x0 0x0 +#define MX7D_PAD_ENET1_RGMII_RX_CTL__ECSPI2_SS1 0x023C 0x04AC 0x0000 0x2 0x0 +#define MX7D_PAD_ENET1_RGMII_RX_CTL__EPDC_SDCE6 0x023C 0x04AC 0x0000 0x4 0x0 +#define MX7D_PAD_ENET1_RGMII_RX_CTL__GPIO7_IO4 0x023C 0x04AC 0x0000 0x5 0x0 +#define MX7D_PAD_ENET1_RGMII_RX_CTL__KPP_ROW1 0x023C 0x04AC 0x0618 0x6 0x1 +#define MX7D_PAD_ENET1_RGMII_RXC__ENET1_RGMII_RXC 0x0240 0x04B0 0x0000 0x0 0x0 +#define MX7D_PAD_ENET1_RGMII_RXC__ENET1_RX_ER 0x0240 0x04B0 0x0000 0x1 0x0 +#define MX7D_PAD_ENET1_RGMII_RXC__ECSPI2_SS2 0x0240 0x04B0 0x0000 0x2 0x0 +#define MX7D_PAD_ENET1_RGMII_RXC__EPDC_SDCE7 0x0240 0x04B0 0x0000 0x4 0x0 +#define MX7D_PAD_ENET1_RGMII_RXC__GPIO7_IO5 0x0240 0x04B0 0x0000 0x5 0x0 +#define MX7D_PAD_ENET1_RGMII_RXC__KPP_COL1 0x0240 0x04B0 0x0000 0x6 0x0 +#define MX7D_PAD_ENET1_RGMII_TD0__ENET1_RGMII_TD0 0x0244 0x04B4 0x0000 0x0 0x0 +#define MX7D_PAD_ENET1_RGMII_TD0__PWM3_OUT 0x0244 0x04B4 0x0000 0x1 0x0 +#define MX7D_PAD_ENET1_RGMII_TD0__ECSPI2_SS3 0x0244 0x04B4 0x0000 0x2 0x0 +#define MX7D_PAD_ENET1_RGMII_TD0__EPDC_SDCE8 0x0244 0x04B4 0x0000 0x4 0x0 +#define MX7D_PAD_ENET1_RGMII_TD0__GPIO7_IO6 0x0244 0x04B4 0x0000 0x5 0x0 +#define MX7D_PAD_ENET1_RGMII_TD0__KPP_ROW0 0x0244 0x04B4 0x0614 0x6 0x1 +#define MX7D_PAD_ENET1_RGMII_TD1__ENET1_RGMII_TD1 0x0248 0x04B8 0x0000 0x0 0x0 +#define MX7D_PAD_ENET1_RGMII_TD1__PWM4_OUT 0x0248 0x04B8 0x0000 0x1 0x0 +#define MX7D_PAD_ENET1_RGMII_TD1__ECSPI2_RDY 0x0248 0x04B8 0x0000 0x2 0x0 +#define MX7D_PAD_ENET1_RGMII_TD1__EPDC_SDCE9 0x0248 0x04B8 0x0000 0x4 0x0 +#define MX7D_PAD_ENET1_RGMII_TD1__GPIO7_IO7 0x0248 0x04B8 0x0000 0x5 0x0 +#define MX7D_PAD_ENET1_RGMII_TD1__KPP_COL0 0x0248 0x04B8 0x05F4 0x6 0x1 +#define MX7D_PAD_ENET1_RGMII_TD2__ENET1_RGMII_TD2 0x024C 0x04BC 0x0000 0x0 0x0 +#define MX7D_PAD_ENET1_RGMII_TD2__FLEXCAN2_RX 0x024C 0x04BC 0x04E0 0x1 0x4 +#define MX7D_PAD_ENET1_RGMII_TD2__ECSPI2_MISO 0x024C 0x04BC 0x0538 0x2 0x1 +#define MX7D_PAD_ENET1_RGMII_TD2__I2C4_SCL 0x024C 0x04BC 0x05EC 0x3 0x4 +#define MX7D_PAD_ENET1_RGMII_TD2__EPDC_SDOED 0x024C 0x04BC 0x0000 0x4 0x0 +#define MX7D_PAD_ENET1_RGMII_TD2__GPIO7_IO8 0x024C 0x04BC 0x0000 0x5 0x0 +#define MX7D_PAD_ENET1_RGMII_TD3__ENET1_RGMII_TD3 0x0250 0x04C0 0x0000 0x0 0x0 +#define MX7D_PAD_ENET1_RGMII_TD3__FLEXCAN2_TX 0x0250 0x04C0 0x0000 0x1 0x0 +#define MX7D_PAD_ENET1_RGMII_TD3__ECSPI2_SS0 0x0250 0x04C0 0x0540 0x2 0x1 +#define MX7D_PAD_ENET1_RGMII_TD3__I2C4_SDA 0x0250 0x04C0 0x05F0 0x3 0x4 +#define MX7D_PAD_ENET1_RGMII_TD3__EPDC_SDOEZ 0x0250 0x04C0 0x0000 0x4 0x0 +#define MX7D_PAD_ENET1_RGMII_TD3__GPIO7_IO9 0x0250 0x04C0 0x0000 0x5 0x0 +#define MX7D_PAD_ENET1_RGMII_TD3__CAAM_RNG_OSC_OBS 0x0250 0x04C0 0x0000 0x7 0x0 +#define MX7D_PAD_ENET1_RGMII_TX_CTL__ENET1_RGMII_TX_CTL 0x0254 0x04C4 0x0000 0x0 0x0 +#define MX7D_PAD_ENET1_RGMII_TX_CTL__SAI1_RX_SYNC 0x0254 0x04C4 0x0000 0x2 0x0 +#define MX7D_PAD_ENET1_RGMII_TX_CTL__GPT2_COMPARE1 0x0254 0x04C4 0x0000 0x3 0x0 +#define MX7D_PAD_ENET1_RGMII_TX_CTL__EPDC_PWR_CTRL2 0x0254 0x04C4 0x0000 0x4 0x0 +#define MX7D_PAD_ENET1_RGMII_TX_CTL__GPIO7_IO10 0x0254 0x04C4 0x0000 0x5 0x0 +#define MX7D_PAD_ENET1_RGMII_TXC__ENET1_RGMII_TXC 0x0258 0x04C8 0x0000 0x0 0x0 +#define MX7D_PAD_ENET1_RGMII_TXC__ENET1_TX_ER 0x0258 0x04C8 0x0000 0x1 0x0 +#define MX7D_PAD_ENET1_RGMII_TXC__SAI1_RX_BCLK 0x0258 0x04C8 0x0000 0x2 0x0 +#define MX7D_PAD_ENET1_RGMII_TXC__GPT2_COMPARE2 0x0258 0x04C8 0x0000 0x3 0x0 +#define MX7D_PAD_ENET1_RGMII_TXC__EPDC_PWR_CTRL3 0x0258 0x04C8 0x0000 0x4 0x0 +#define MX7D_PAD_ENET1_RGMII_TXC__GPIO7_IO11 0x0258 0x04C8 0x0000 0x5 0x0 +#define MX7D_PAD_ENET1_TX_CLK__ENET1_TX_CLK 0x025C 0x04CC 0x0000 0x0 0x0 +#define MX7D_PAD_ENET1_TX_CLK__CCM_ENET_REF_CLK1 0x025C 0x04CC 0x0564 0x1 0x2 +#define MX7D_PAD_ENET1_TX_CLK__SAI1_RX_DATA0 0x025C 0x04CC 0x06A0 0x2 0x1 +#define MX7D_PAD_ENET1_TX_CLK__GPT2_COMPARE3 0x025C 0x04CC 0x0000 0x3 0x0 +#define MX7D_PAD_ENET1_TX_CLK__EPDC_PWR_IRQ 0x025C 0x04CC 0x057C 0x4 0x1 +#define MX7D_PAD_ENET1_TX_CLK__GPIO7_IO12 0x025C 0x04CC 0x0000 0x5 0x0 +#define MX7D_PAD_ENET1_TX_CLK__CCM_EXT_CLK1 0x025C 0x04CC 0x04E4 0x6 0x2 +#define MX7D_PAD_ENET1_TX_CLK__CSU_ALARM_AUT0 0x025C 0x04CC 0x0000 0x7 0x0 +#define MX7D_PAD_ENET1_RX_CLK__ENET1_RX_CLK 0x0260 0x04D0 0x056C 0x0 0x0 +#define MX7D_PAD_ENET1_RX_CLK__WDOG2_WDOG_B 0x0260 0x04D0 0x0000 0x1 0x0 +#define MX7D_PAD_ENET1_RX_CLK__SAI1_TX_BCLK 0x0260 0x04D0 0x06A8 0x2 0x1 +#define MX7D_PAD_ENET1_RX_CLK__GPT2_CLK 0x0260 0x04D0 0x0000 0x3 0x0 +#define MX7D_PAD_ENET1_RX_CLK__EPDC_PWR_WAKE 0x0260 0x04D0 0x0000 0x4 0x0 +#define MX7D_PAD_ENET1_RX_CLK__GPIO7_IO13 0x0260 0x04D0 0x0000 0x5 0x0 +#define MX7D_PAD_ENET1_RX_CLK__CCM_EXT_CLK2 0x0260 0x04D0 0x04E8 0x6 0x2 +#define MX7D_PAD_ENET1_RX_CLK__CSU_ALARM_AUT1 0x0260 0x04D0 0x0000 0x7 0x0 +#define MX7D_PAD_ENET1_CRS__ENET1_CRS 0x0264 0x04D4 0x0000 0x0 0x0 +#define MX7D_PAD_ENET1_CRS__WDOG2_WDOG_RST_B_DEB 0x0264 0x04D4 0x0000 0x1 0x0 +#define MX7D_PAD_ENET1_CRS__SAI1_TX_SYNC 0x0264 0x04D4 0x06AC 0x2 0x1 +#define MX7D_PAD_ENET1_CRS__GPT2_CAPTURE1 0x0264 0x04D4 0x0000 0x3 0x0 +#define MX7D_PAD_ENET1_CRS__EPDC_PWR_CTRL0 0x0264 0x04D4 0x0000 0x4 0x0 +#define MX7D_PAD_ENET1_CRS__GPIO7_IO14 0x0264 0x04D4 0x0000 0x5 0x0 +#define MX7D_PAD_ENET1_CRS__CCM_EXT_CLK3 0x0264 0x04D4 0x04EC 0x6 0x2 +#define MX7D_PAD_ENET1_CRS__CSU_ALARM_AUT2 0x0264 0x04D4 0x0000 0x7 0x0 +#define MX7D_PAD_ENET1_COL__ENET1_COL 0x0268 0x04D8 0x0000 0x0 0x0 +#define MX7D_PAD_ENET1_COL__WDOG1_WDOG_ANY 0x0268 0x04D8 0x0000 0x1 0x0 +#define MX7D_PAD_ENET1_COL__SAI1_TX_DATA0 0x0268 0x04D8 0x0000 0x2 0x0 +#define MX7D_PAD_ENET1_COL__GPT2_CAPTURE2 0x0268 0x04D8 0x0000 0x3 0x0 +#define MX7D_PAD_ENET1_COL__EPDC_PWR_CTRL1 0x0268 0x04D8 0x0000 0x4 0x0 +#define MX7D_PAD_ENET1_COL__GPIO7_IO15 0x0268 0x04D8 0x0000 0x5 0x0 +#define MX7D_PAD_ENET1_COL__CCM_EXT_CLK4 0x0268 0x04D8 0x04F0 0x6 0x2 +#define MX7D_PAD_ENET1_COL__CSU_INT_DEB 0x0268 0x04D8 0x0000 0x7 0x0 + +#endif /* __DTS_IMX7D_PINFUNC_H */ diff --git a/arch/arm/boot/dts/imx7d-sdb.dts b/arch/arm/boot/dts/imx7d-sdb.dts new file mode 100644 index 000000000..fdd1d7c9a --- /dev/null +++ b/arch/arm/boot/dts/imx7d-sdb.dts @@ -0,0 +1,408 @@ +/* + * Copyright (C) 2015 Freescale Semiconductor, Inc. + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; + +#include <dt-bindings/input/input.h> +#include "imx7d.dtsi" + +/ { + model = "Freescale i.MX7 SabreSD Board"; + compatible = "fsl,imx7d-sdb", "fsl,imx7d"; + + memory { + reg = <0x80000000 0x80000000>; + }; + + regulators { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <0>; + + reg_usb_otg1_vbus: regulator@0 { + compatible = "regulator-fixed"; + reg = <0>; + regulator-name = "usb_otg1_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio1 5 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + reg_usb_otg2_vbus: regulator@1 { + compatible = "regulator-fixed"; + reg = <1>; + regulator-name = "usb_otg2_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio4 7 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + reg_can2_3v3: regulator@2 { + compatible = "regulator-fixed"; + reg = <2>; + regulator-name = "can2-3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio1 7 GPIO_ACTIVE_LOW>; + }; + + reg_vref_1v8: regulator@3 { + compatible = "regulator-fixed"; + reg = <3>; + regulator-name = "vref-1v8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + }; +}; + +&cpu0 { + arm-supply = <&sw1a_reg>; +}; + +&i2c1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c1>; + status = "okay"; + + pmic: pfuze3000@08 { + compatible = "fsl,pfuze3000"; + reg = <0x08>; + + regulators { + sw1a_reg: sw1a { + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <1475000>; + regulator-boot-on; + regulator-always-on; + regulator-ramp-delay = <6250>; + }; + + /* use sw1c_reg to align with pfuze100/pfuze200 */ + sw1c_reg: sw1b { + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <1475000>; + regulator-boot-on; + regulator-always-on; + regulator-ramp-delay = <6250>; + }; + + sw2_reg: sw2 { + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <1850000>; + regulator-boot-on; + regulator-always-on; + }; + + sw3a_reg: sw3 { + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <1650000>; + regulator-boot-on; + regulator-always-on; + }; + + swbst_reg: swbst { + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5150000>; + }; + + snvs_reg: vsnvs { + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <3000000>; + regulator-boot-on; + regulator-always-on; + }; + + vref_reg: vrefddr { + regulator-boot-on; + regulator-always-on; + }; + + vgen1_reg: vldo1 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + vgen2_reg: vldo2 { + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1550000>; + }; + + vgen3_reg: vccsd { + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + vgen4_reg: v33 { + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + vgen5_reg: vldo3 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + vgen6_reg: vldo4 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + }; + }; +}; + +&i2c2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c2>; + status = "okay"; +}; + +&i2c3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c3>; + status = "okay"; +}; + +&i2c4 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c4>; + status = "okay"; + + codec: wm8960@1a { + compatible = "wlf,wm8960"; + reg = <0x1a>; + clocks = <&clks IMX7D_AUDIO_MCLK_ROOT_CLK>; + clock-names = "mclk"; + wlf,shared-lrclk; + }; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1>; + assigned-clocks = <&clks IMX7D_UART1_ROOT_SRC>; + assigned-clock-parents = <&clks IMX7D_PLL_SYS_MAIN_240M_CLK>; + status = "okay"; +}; + +&usdhc1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc1>; + cd-gpios = <&gpio5 0 GPIO_ACTIVE_LOW>; + wp-gpios = <&gpio5 1 GPIO_ACTIVE_HIGH>; + enable-sdio-wakeup; + keep-power-in-suspend; + status = "okay"; +}; + +&iomuxc { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_hog>; + + imx7d-sdb { + pinctrl_hog: hoggrp { + fsl,pins = < + MX7D_PAD_UART3_CTS_B__GPIO4_IO7 0x14 + MX7D_PAD_ECSPI2_SS0__GPIO4_IO23 0x34 /* bt reg on */ + >; + }; + + pinctrl_i2c1: i2c1grp { + fsl,pins = < + MX7D_PAD_I2C1_SDA__I2C1_SDA 0x4000007f + MX7D_PAD_I2C1_SCL__I2C1_SCL 0x4000007f + >; + }; + + pinctrl_i2c2: i2c2grp { + fsl,pins = < + MX7D_PAD_I2C2_SDA__I2C2_SDA 0x4000007f + MX7D_PAD_I2C2_SCL__I2C2_SCL 0x4000007f + >; + }; + + pinctrl_i2c3: i2c3grp { + fsl,pins = < + MX7D_PAD_I2C3_SDA__I2C3_SDA 0x4000007f + MX7D_PAD_I2C3_SCL__I2C3_SCL 0x4000007f + >; + }; + + pinctrl_i2c4: i2c4grp { + fsl,pins = < + MX7D_PAD_SAI1_RX_BCLK__I2C4_SDA 0x4000007f + MX7D_PAD_SAI1_RX_SYNC__I2C4_SCL 0x4000007f + >; + }; + + + pinctrl_uart1: uart1grp { + fsl,pins = < + MX7D_PAD_UART1_TX_DATA__UART1_DCE_TX 0x79 + MX7D_PAD_UART1_RX_DATA__UART1_DCE_RX 0x79 + >; + }; + + pinctrl_uart5: uart5grp { + fsl,pins = < + MX7D_PAD_SAI1_TX_BCLK__UART5_DCE_TX 0x79 + MX7D_PAD_SAI1_RX_DATA__UART5_DCE_RX 0x79 + MX7D_PAD_SAI1_TX_SYNC__UART5_DCE_CTS 0x79 + MX7D_PAD_SAI1_TX_DATA__UART5_DCE_RTS 0x79 + >; + }; + + pinctrl_uart6: uart6grp { + fsl,pins = < + MX7D_PAD_ECSPI1_MOSI__UART6_DCE_TX 0x79 + MX7D_PAD_ECSPI1_SCLK__UART6_DCE_RX 0x79 + MX7D_PAD_ECSPI1_SS0__UART6_DCE_CTS 0x79 + MX7D_PAD_ECSPI1_MISO__UART6_DCE_RTS 0x79 + >; + }; + + pinctrl_usdhc1: usdhc1grp { + fsl,pins = < + MX7D_PAD_SD1_CMD__SD1_CMD 0x59 + MX7D_PAD_SD1_CLK__SD1_CLK 0x19 + MX7D_PAD_SD1_DATA0__SD1_DATA0 0x59 + MX7D_PAD_SD1_DATA1__SD1_DATA1 0x59 + MX7D_PAD_SD1_DATA2__SD1_DATA2 0x59 + MX7D_PAD_SD1_DATA3__SD1_DATA3 0x59 + MX7D_PAD_SD1_CD_B__GPIO5_IO0 0x59 /* CD */ + MX7D_PAD_SD1_WP__GPIO5_IO1 0x59 /* WP */ + MX7D_PAD_SD1_RESET_B__GPIO5_IO2 0x59 /* vmmc */ + >; + }; + + pinctrl_usdhc2: usdhc2grp { + fsl,pins = < + MX7D_PAD_SD2_CMD__SD2_CMD 0x59 + MX7D_PAD_SD2_CLK__SD2_CLK 0x19 + MX7D_PAD_SD2_DATA0__SD2_DATA0 0x59 + MX7D_PAD_SD2_DATA1__SD2_DATA1 0x59 + MX7D_PAD_SD2_DATA2__SD2_DATA2 0x59 + MX7D_PAD_SD2_DATA3__SD2_DATA3 0x59 + MX7D_PAD_ECSPI2_MOSI__GPIO4_IO21 0x59 /* WL_REG_ON */ + >; + }; + + pinctrl_usdhc2_100mhz: usdhc2grp_100mhz { + fsl,pins = < + MX7D_PAD_SD2_CMD__SD2_CMD 0x5a + MX7D_PAD_SD2_CLK__SD2_CLK 0x1a + MX7D_PAD_SD2_DATA0__SD2_DATA0 0x5a + MX7D_PAD_SD2_DATA1__SD2_DATA1 0x5a + MX7D_PAD_SD2_DATA2__SD2_DATA2 0x5a + MX7D_PAD_SD2_DATA3__SD2_DATA3 0x5a + >; + }; + + pinctrl_usdhc2_200mhz: usdhc2grp_200mhz { + fsl,pins = < + MX7D_PAD_SD2_CMD__SD2_CMD 0x5b + MX7D_PAD_SD2_CLK__SD2_CLK 0x1b + MX7D_PAD_SD2_DATA0__SD2_DATA0 0x5b + MX7D_PAD_SD2_DATA1__SD2_DATA1 0x5b + MX7D_PAD_SD2_DATA2__SD2_DATA2 0x5b + MX7D_PAD_SD2_DATA3__SD2_DATA3 0x5b + >; + }; + + + pinctrl_usdhc3: usdhc3grp { + fsl,pins = < + MX7D_PAD_SD3_CMD__SD3_CMD 0x59 + MX7D_PAD_SD3_CLK__SD3_CLK 0x19 + MX7D_PAD_SD3_DATA0__SD3_DATA0 0x59 + MX7D_PAD_SD3_DATA1__SD3_DATA1 0x59 + MX7D_PAD_SD3_DATA2__SD3_DATA2 0x59 + MX7D_PAD_SD3_DATA3__SD3_DATA3 0x59 + MX7D_PAD_SD3_DATA4__SD3_DATA4 0x59 + MX7D_PAD_SD3_DATA5__SD3_DATA5 0x59 + MX7D_PAD_SD3_DATA6__SD3_DATA6 0x59 + MX7D_PAD_SD3_DATA7__SD3_DATA7 0x59 + MX7D_PAD_SD3_STROBE__SD3_STROBE 0x19 + >; + }; + + pinctrl_usdhc3_100mhz: usdhc3grp_100mhz { + fsl,pins = < + MX7D_PAD_SD3_CMD__SD3_CMD 0x5a + MX7D_PAD_SD3_CLK__SD3_CLK 0x1a + MX7D_PAD_SD3_DATA0__SD3_DATA0 0x5a + MX7D_PAD_SD3_DATA1__SD3_DATA1 0x5a + MX7D_PAD_SD3_DATA2__SD3_DATA2 0x5a + MX7D_PAD_SD3_DATA3__SD3_DATA3 0x5a + MX7D_PAD_SD3_DATA4__SD3_DATA4 0x5a + MX7D_PAD_SD3_DATA5__SD3_DATA5 0x5a + MX7D_PAD_SD3_DATA6__SD3_DATA6 0x5a + MX7D_PAD_SD3_DATA7__SD3_DATA7 0x5a + MX7D_PAD_SD3_STROBE__SD3_STROBE 0x1a + >; + }; + + pinctrl_usdhc3_200mhz: usdhc3grp_200mhz { + fsl,pins = < + MX7D_PAD_SD3_CMD__SD3_CMD 0x5b + MX7D_PAD_SD3_CLK__SD3_CLK 0x1b + MX7D_PAD_SD3_DATA0__SD3_DATA0 0x5b + MX7D_PAD_SD3_DATA1__SD3_DATA1 0x5b + MX7D_PAD_SD3_DATA2__SD3_DATA2 0x5b + MX7D_PAD_SD3_DATA3__SD3_DATA3 0x5b + MX7D_PAD_SD3_DATA4__SD3_DATA4 0x5b + MX7D_PAD_SD3_DATA5__SD3_DATA5 0x5b + MX7D_PAD_SD3_DATA6__SD3_DATA6 0x5b + MX7D_PAD_SD3_DATA7__SD3_DATA7 0x5b + MX7D_PAD_SD3_STROBE__SD3_STROBE 0x1b + >; + }; + + }; +}; diff --git a/arch/arm/boot/dts/imx7d.dtsi b/arch/arm/boot/dts/imx7d.dtsi new file mode 100644 index 000000000..c42cf8db0 --- /dev/null +++ b/arch/arm/boot/dts/imx7d.dtsi @@ -0,0 +1,486 @@ +/* + * Copyright 2015 Freescale Semiconductor, Inc. + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +#include <dt-bindings/clock/imx7d-clock.h> +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/interrupt-controller/arm-gic.h> +#include "imx7d-pinfunc.h" +#include "skeleton.dtsi" + +/ { + aliases { + gpio0 = &gpio1; + gpio1 = &gpio2; + gpio2 = &gpio3; + gpio3 = &gpio4; + gpio4 = &gpio5; + gpio5 = &gpio6; + gpio6 = &gpio7; + i2c0 = &i2c1; + i2c1 = &i2c2; + i2c2 = &i2c3; + i2c3 = &i2c4; + mmc0 = &usdhc1; + mmc1 = &usdhc2; + mmc2 = &usdhc3; + serial0 = &uart1; + serial1 = &uart2; + serial2 = &uart3; + serial3 = &uart4; + serial4 = &uart5; + serial5 = &uart6; + serial6 = &uart7; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu0: cpu@0 { + compatible = "arm,cortex-a7"; + device_type = "cpu"; + reg = <0>; + operating-points = < + /* KHz uV */ + 996000 1075000 + 792000 975000 + >; + clock-latency = <61036>; /* two CLK32 periods */ + clocks = <&clks IMX7D_ARM_A7_ROOT_CLK>, <&clks IMX7D_ARM_A7_ROOT_SRC>, + <&clks IMX7D_PLL_ARM_MAIN_CLK>, <&clks IMX7D_PLL_SYS_MAIN_CLK>; + clock-names = "arm", "arm_root_src", "pll_arm", "pll_sys_main"; + }; + + cpu1: cpu@1 { + compatible = "arm,cortex-a7"; + device_type = "cpu"; + reg = <1>; + }; + }; + + intc: interrupt-controller@31001000 { + compatible = "arm,cortex-a7-gic"; + #interrupt-cells = <3>; + interrupt-controller; + reg = <0x31001000 0x1000>, + <0x31002000 0x1000>, + <0x31004000 0x2000>, + <0x31006000 0x2000>; + }; + + ckil: clock-cki { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <32768>; + clock-output-names = "ckil"; + }; + + osc: clock-osc { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <24000000>; + clock-output-names = "osc"; + }; + + soc { + #address-cells = <1>; + #size-cells = <1>; + compatible = "simple-bus"; + interrupt-parent = <&intc>; + ranges; + + aips1: aips-bus@30000000 { + compatible = "fsl,aips-bus", "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x30000000 0x400000>; + ranges; + + gpio1: gpio@30200000 { + compatible = "fsl,imx7d-gpio", "fsl,imx35-gpio"; + reg = <0x30200000 0x10000>; + interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>, /* GPIO1_INT15_0 */ + <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>; /* GPIO1_INT31_16 */ + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpio2: gpio@30210000 { + compatible = "fsl,imx7d-gpio", "fsl,imx35-gpio"; + reg = <0x30210000 0x10000>; + interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpio3: gpio@30220000 { + compatible = "fsl,imx7d-gpio", "fsl,imx35-gpio"; + reg = <0x30220000 0x10000>; + interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpio4: gpio@30230000 { + compatible = "fsl,imx7d-gpio", "fsl,imx35-gpio"; + reg = <0x30230000 0x10000>; + interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpio5: gpio@30240000 { + compatible = "fsl,imx7d-gpio", "fsl,imx35-gpio"; + reg = <0x30240000 0x10000>; + interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpio6: gpio@30250000 { + compatible = "fsl,imx7d-gpio", "fsl,imx35-gpio"; + reg = <0x30250000 0x10000>; + interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpio7: gpio@30260000 { + compatible = "fsl,imx7d-gpio", "fsl,imx35-gpio"; + reg = <0x30260000 0x10000>; + interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpt1: gpt@302d0000 { + compatible = "fsl,imx7d-gpt", "fsl,imx6sx-gpt"; + reg = <0x302d0000 0x10000>; + interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX7D_CLK_DUMMY>, + <&clks IMX7D_GPT1_ROOT_CLK>; + clock-names = "ipg", "per"; + }; + + gpt2: gpt@302e0000 { + compatible = "fsl,imx7d-gpt", "fsl,imx6sx-gpt"; + reg = <0x302e0000 0x10000>; + interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX7D_CLK_DUMMY>, + <&clks IMX7D_GPT2_ROOT_CLK>; + clock-names = "ipg", "per"; + status = "disabled"; + }; + + gpt3: gpt@302f0000 { + compatible = "fsl,imx7d-gpt", "fsl,imx6sx-gpt"; + reg = <0x302f0000 0x10000>; + interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX7D_CLK_DUMMY>, + <&clks IMX7D_GPT3_ROOT_CLK>; + clock-names = "ipg", "per"; + status = "disabled"; + }; + + gpt4: gpt@30300000 { + compatible = "fsl,imx7d-gpt", "fsl,imx6sx-gpt"; + reg = <0x30300000 0x10000>; + interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX7D_CLK_DUMMY>, + <&clks IMX7D_GPT4_ROOT_CLK>; + clock-names = "ipg", "per"; + status = "disabled"; + }; + + iomuxc: iomuxc@30330000 { + compatible = "fsl,imx7d-iomuxc"; + reg = <0x30330000 0x10000>; + }; + + gpr: iomuxc-gpr@30340000 { + compatible = "fsl,imx7d-iomuxc-gpr", "syscon"; + reg = <0x30340000 0x10000>; + }; + + ocotp: ocotp-ctrl@30350000 { + compatible = "syscon"; + reg = <0x30350000 0x10000>; + clocks = <&clks IMX7D_CLK_DUMMY>; + status = "disabled"; + }; + + anatop: anatop@30360000 { + compatible = "fsl,imx7d-anatop", "fsl,imx6q-anatop", + "syscon", "simple-bus"; + reg = <0x30360000 0x10000>; + interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>; + + reg_1p0d: regulator-vdd1p0d@210 { + compatible = "fsl,anatop-regulator"; + regulator-name = "vdd1p0d"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1200000>; + anatop-reg-offset = <0x210>; + anatop-vol-bit-shift = <8>; + anatop-vol-bit-width = <5>; + anatop-min-bit-val = <8>; + anatop-min-voltage = <800000>; + anatop-max-voltage = <1200000>; + anatop-enable-bit = <31>; + }; + }; + + snvs: snvs@30370000 { + compatible = "fsl,sec-v4.0-mon", "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x30370000 0x10000>; + + snvs-rtc-lp@34 { + compatible = "fsl,sec-v4.0-mon-rtc-lp"; + reg = <0x34 0x58>; + interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>; + }; + }; + + clks: ccm@30380000 { + compatible = "fsl,imx7d-ccm"; + reg = <0x30380000 0x10000>; + interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>; + #clock-cells = <1>; + clocks = <&ckil>, <&osc>; + clock-names = "ckil", "osc"; + }; + + src: src@30390000 { + compatible = "fsl,imx7d-src", "fsl,imx51-src", "syscon"; + reg = <0x30390000 0x10000>; + interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>; + #reset-cells = <1>; + }; + }; + + aips3: aips-bus@30800000 { + compatible = "fsl,aips-bus", "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x30800000 0x400000>; + ranges; + + uart1: serial@30860000 { + compatible = "fsl,imx7d-uart", + "fsl,imx6q-uart"; + reg = <0x30860000 0x10000>; + interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX7D_UART1_ROOT_CLK>, + <&clks IMX7D_UART1_ROOT_CLK>; + clock-names = "ipg", "per"; + status = "disabled"; + }; + + uart2: serial@30870000 { + compatible = "fsl,imx7d-uart", + "fsl,imx6q-uart"; + reg = <0x30870000 0x10000>; + interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX7D_UART2_ROOT_CLK>, + <&clks IMX7D_UART2_ROOT_CLK>; + clock-names = "ipg", "per"; + status = "disabled"; + }; + + uart3: serial@30880000 { + compatible = "fsl,imx7d-uart", + "fsl,imx6q-uart"; + reg = <0x30880000 0x10000>; + interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX7D_UART3_ROOT_CLK>, + <&clks IMX7D_UART3_ROOT_CLK>; + clock-names = "ipg", "per"; + status = "disabled"; + }; + + i2c1: i2c@30a20000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,imx7d-i2c", "fsl,imx21-i2c"; + reg = <0x30a20000 0x10000>; + interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX7D_I2C1_ROOT_CLK>; + status = "disabled"; + }; + + i2c2: i2c@30a30000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,imx7d-i2c", "fsl,imx21-i2c"; + reg = <0x30a30000 0x10000>; + interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX7D_I2C2_ROOT_CLK>; + status = "disabled"; + }; + + i2c3: i2c@30a40000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,imx7d-i2c", "fsl,imx21-i2c"; + reg = <0x30a40000 0x10000>; + interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX7D_I2C3_ROOT_CLK>; + status = "disabled"; + }; + + i2c4: i2c@30a50000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,imx7d-i2c", "fsl,imx21-i2c"; + reg = <0x30a50000 0x10000>; + interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX7D_I2C4_ROOT_CLK>; + status = "disabled"; + }; + + uart4: serial@30a60000 { + compatible = "fsl,imx7d-uart", + "fsl,imx6q-uart"; + reg = <0x30a60000 0x10000>; + interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX7D_UART4_ROOT_CLK>, + <&clks IMX7D_UART4_ROOT_CLK>; + clock-names = "ipg", "per"; + status = "disabled"; + }; + + uart5: serial@30a70000 { + compatible = "fsl,imx7d-uart", + "fsl,imx6q-uart"; + reg = <0x30a70000 0x10000>; + interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX7D_UART5_ROOT_CLK>, + <&clks IMX7D_UART5_ROOT_CLK>; + clock-names = "ipg", "per"; + status = "disabled"; + }; + + uart6: serial@30a80000 { + compatible = "fsl,imx7d-uart", + "fsl,imx6q-uart"; + reg = <0x30a80000 0x10000>; + interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX7D_UART6_ROOT_CLK>, + <&clks IMX7D_UART6_ROOT_CLK>; + clock-names = "ipg", "per"; + status = "disabled"; + }; + + uart7: serial@30a90000 { + compatible = "fsl,imx7d-uart", + "fsl,imx6q-uart"; + reg = <0x30a90000 0x10000>; + interrupts = <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX7D_UART7_ROOT_CLK>, + <&clks IMX7D_UART7_ROOT_CLK>; + clock-names = "ipg", "per"; + status = "disabled"; + }; + + usdhc1: usdhc@30b40000 { + compatible = "fsl,imx7d-usdhc", "fsl,imx6sl-usdhc"; + reg = <0x30b40000 0x10000>; + interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX7D_CLK_DUMMY>, + <&clks IMX7D_CLK_DUMMY>, + <&clks IMX7D_USDHC1_ROOT_CLK>; + clock-names = "ipg", "ahb", "per"; + bus-width = <4>; + status = "disabled"; + }; + + usdhc2: usdhc@30b50000 { + compatible = "fsl,imx7d-usdhc", "fsl,imx6sl-usdhc"; + reg = <0x30b50000 0x10000>; + interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX7D_CLK_DUMMY>, + <&clks IMX7D_CLK_DUMMY>, + <&clks IMX7D_USDHC2_ROOT_CLK>; + clock-names = "ipg", "ahb", "per"; + bus-width = <4>; + status = "disabled"; + }; + + usdhc3: usdhc@30b60000 { + compatible = "fsl,imx7d-usdhc", "fsl,imx6sl-usdhc"; + reg = <0x30b60000 0x10000>; + interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX7D_CLK_DUMMY>, + <&clks IMX7D_CLK_DUMMY>, + <&clks IMX7D_USDHC3_ROOT_CLK>; + clock-names = "ipg", "ahb", "per"; + bus-width = <4>; + status = "disabled"; + }; + }; + }; +}; diff --git a/arch/arm/boot/dts/integrator.dtsi b/arch/arm/boot/dts/integrator.dtsi index 28e38f8c6..3807d4f46 100644 --- a/arch/arm/boot/dts/integrator.dtsi +++ b/arch/arm/boot/dts/integrator.dtsi @@ -6,7 +6,7 @@ / { core-module@10000000 { - compatible = "arm,core-module-integrator", "syscon"; + compatible = "arm,core-module-integrator", "syscon", "simple-mfd"; reg = <0x10000000 0x200>; /* Use core module LED to indicate CPU load */ @@ -95,7 +95,7 @@ syscon { /* Debug registers mapped as syscon */ - compatible = "syscon"; + compatible = "syscon", "simple-mfd"; reg = <0x1a000000 0x10>; led@04.0 { diff --git a/arch/arm/boot/dts/k2e-evm.dts b/arch/arm/boot/dts/k2e-evm.dts index 560d62150..50c83c21d 100644 --- a/arch/arm/boot/dts/k2e-evm.dts +++ b/arch/arm/boot/dts/k2e-evm.dts @@ -141,6 +141,7 @@ }; &mdio { + status = "ok"; ethphy0: ethernet-phy@0 { compatible = "marvell,88E1514", "marvell,88E1510", "ethernet-phy-ieee802.3-c22"; reg = <0>; diff --git a/arch/arm/boot/dts/k2e-netcp.dtsi b/arch/arm/boot/dts/k2e-netcp.dtsi new file mode 100644 index 000000000..b13b3c94e --- /dev/null +++ b/arch/arm/boot/dts/k2e-netcp.dtsi @@ -0,0 +1,206 @@ +/* + * Device Tree Source for Keystone 2 Edison Netcp driver + * + * Copyright 2015 Texas Instruments, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +qmss: qmss@2a40000 { + compatible = "ti,keystone-navigator-qmss"; + dma-coherent; + #address-cells = <1>; + #size-cells = <1>; + clocks = <&chipclk13>; + ranges; + queue-range = <0 0x2000>; + linkram0 = <0x100000 0x4000>; + linkram1 = <0 0x10000>; + + qmgrs { + #address-cells = <1>; + #size-cells = <1>; + ranges; + qmgr0 { + managed-queues = <0 0x2000>; + reg = <0x2a40000 0x20000>, + <0x2a06000 0x400>, + <0x2a02000 0x1000>, + <0x2a03000 0x1000>, + <0x23a80000 0x20000>, + <0x2a80000 0x20000>; + reg-names = "peek", "status", "config", + "region", "push", "pop"; + }; + }; + queue-pools { + qpend { + qpend-0 { + qrange = <658 8>; + interrupts =<0 40 0xf04 0 41 0xf04 0 42 0xf04 + 0 43 0xf04 0 44 0xf04 0 45 0xf04 + 0 46 0xf04 0 47 0xf04>; + }; + qpend-1 { + qrange = <528 16>; + interrupts = <0 48 0xf04 0 49 0xf04 0 50 0xf04 + 0 51 0xf04 0 52 0xf04 0 53 0xf04 + 0 54 0xf04 0 55 0xf04 0 56 0xf04 + 0 57 0xf04 0 58 0xf04 0 59 0xf04 + 0 60 0xf04 0 61 0xf04 0 62 0xf04 + 0 63 0xf04>; + qalloc-by-id; + }; + qpend-2 { + qrange = <544 16>; + interrupts = <0 64 0xf04 0 65 0xf04 0 66 0xf04 + 0 59 0xf04 0 68 0xf04 0 69 0xf04 + 0 70 0xf04 0 71 0xf04 0 72 0xf04 + 0 73 0xf04 0 74 0xf04 0 75 0xf04 + 0 76 0xf04 0 77 0xf04 0 78 0xf04 + 0 79 0xf04>; + }; + }; + general-purpose { + gp-0 { + qrange = <4000 64>; + }; + netcp-tx { + qrange = <896 128>; + qalloc-by-id; + }; + }; + }; + descriptor-regions { + #address-cells = <1>; + #size-cells = <1>; + ranges; + region-12 { + id = <12>; + region-spec = <8192 128>; /* num_desc desc_size */ + link-index = <0x4000>; + }; + }; +}; /* qmss */ + +knav_dmas: knav_dmas@0 { + compatible = "ti,keystone-navigator-dma"; + clocks = <&papllclk>; + #address-cells = <1>; + #size-cells = <1>; + ranges; + ti,navigator-cloud-address = <0x23a80000 0x23a90000 + 0x23a80000 0x23a90000>; + + dma_gbe: dma_gbe@0 { + reg = <0x24186000 0x100>, + <0x24187000 0x2a0>, + <0x24188000 0xb60>, + <0x24186100 0x80>, + <0x24189000 0x1000>; + reg-names = "global", "txchan", "rxchan", + "txsched", "rxflow"; + }; +}; + +netcp: netcp@24000000 { + reg = <0x2620110 0x8>; + reg-names = "efuse"; + compatible = "ti,netcp-1.0"; + #address-cells = <1>; + #size-cells = <1>; + + /* NetCP address range */ + ranges = <0 0x24000000 0x1000000>; + + clocks = <&papllclk>, <&clkcpgmac>, <&chipclk12>; + dma-coherent; + + ti,navigator-dmas = <&dma_gbe 0>, + <&dma_gbe 8>, + <&dma_gbe 0>; + ti,navigator-dma-names = "netrx0", "netrx1", "nettx"; + + netcp-devices { + #address-cells = <1>; + #size-cells = <1>; + ranges; + gbe@200000 { /* ETHSS */ + label = "netcp-gbe"; + compatible = "ti,netcp-gbe-9"; + reg = <0x200000 0x900>, <0x220000 0x20000>; + /* enable-ale; */ + tx-queue = <896>; + tx-channel = "nettx"; + + interfaces { + gbe0: interface-0 { + slave-port = <0>; + link-interface = <1>; + phy-handle = <ðphy0>; + }; + gbe1: interface-1 { + slave-port = <1>; + link-interface = <1>; + phy-handle = <ðphy1>; + }; + }; + + secondary-slave-ports { + port-2 { + slave-port = <2>; + link-interface = <2>; + }; + port-3 { + slave-port = <3>; + link-interface = <2>; + }; + port-4 { + slave-port = <4>; + link-interface = <2>; + }; + port-5 { + slave-port = <5>; + link-interface = <2>; + }; + port-6 { + slave-port = <6>; + link-interface = <2>; + }; + port-7 { + slave-port = <7>; + link-interface = <2>; + }; + }; + }; + }; + + netcp-interfaces { + interface-0 { + rx-channel = "netrx0"; + rx-pool = <1024 12>; + tx-pool = <1024 12>; + rx-queue-depth = <128 128 0 0>; + rx-buffer-size = <1518 4096 0 0>; + rx-queue = <528>; + tx-completion-queue = <530>; + efuse-mac = <1>; + netcp-gbe = <&gbe0>; + + }; + interface-1 { + rx-channel = "netrx1"; + rx-pool = <1024 12>; + tx-pool = <1024 12>; + rx-queue-depth = <128 128 0 0>; + rx-buffer-size = <1518 4096 0 0>; + rx-queue = <529>; + tx-completion-queue = <531>; + efuse-mac = <0>; + local-mac-address = [02 18 31 7e 3e 00]; + netcp-gbe = <&gbe1>; + }; + }; +}; diff --git a/arch/arm/boot/dts/k2e.dtsi b/arch/arm/boot/dts/k2e.dtsi index 5fc14683d..675fb8e49 100644 --- a/arch/arm/boot/dts/k2e.dtsi +++ b/arch/arm/boot/dts/k2e.dtsi @@ -86,7 +86,7 @@ gpio,syscon-dev = <&devctrl 0x240>; }; - pcie@21020000 { + pcie1: pcie@21020000 { compatible = "ti,keystone-pcie","snps,dw-pcie"; clocks = <&clkpcie1>; clock-names = "pcie"; @@ -96,6 +96,7 @@ ranges = <0x81000000 0 0 0x23260000 0x4000 0x4000 0x82000000 0 0x60000000 0x60000000 0 0x10000000>; + status = "disabled"; device_type = "pci"; num-lanes = <2>; @@ -130,9 +131,17 @@ <GIC_SPI 376 IRQ_TYPE_EDGE_RISING>; }; }; - }; -}; -&mdio { - reg = <0x24200f00 0x100>; + mdio: mdio@24200f00 { + compatible = "ti,keystone_mdio", "ti,davinci_mdio"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x24200f00 0x100>; + status = "disabled"; + clocks = <&clkcpgmac>; + clock-names = "fck"; + bus_freq = <2500000>; + }; + /include/ "k2e-netcp.dtsi" + }; }; diff --git a/arch/arm/boot/dts/k2hk-evm.dts b/arch/arm/boot/dts/k2hk-evm.dts index 3223cc152..660ebf58d 100644 --- a/arch/arm/boot/dts/k2hk-evm.dts +++ b/arch/arm/boot/dts/k2hk-evm.dts @@ -169,6 +169,7 @@ }; &mdio { + status = "ok"; ethphy0: ethernet-phy@0 { compatible = "marvell,88E1111", "ethernet-phy-ieee802.3-c22"; reg = <0>; diff --git a/arch/arm/boot/dts/k2hk-netcp.dtsi b/arch/arm/boot/dts/k2hk-netcp.dtsi new file mode 100644 index 000000000..77a32c3c1 --- /dev/null +++ b/arch/arm/boot/dts/k2hk-netcp.dtsi @@ -0,0 +1,208 @@ +/* + * Device Tree Source for Keystone 2 Hawking Netcp driver + * + * Copyright 2015 Texas Instruments, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +qmss: qmss@2a40000 { + compatible = "ti,keystone-navigator-qmss"; + dma-coherent; + #address-cells = <1>; + #size-cells = <1>; + clocks = <&chipclk13>; + ranges; + queue-range = <0 0x4000>; + linkram0 = <0x100000 0x8000>; + linkram1 = <0x0 0x10000>; + + qmgrs { + #address-cells = <1>; + #size-cells = <1>; + ranges; + qmgr0 { + managed-queues = <0 0x2000>; + reg = <0x2a40000 0x20000>, + <0x2a06000 0x400>, + <0x2a02000 0x1000>, + <0x2a03000 0x1000>, + <0x23a80000 0x20000>, + <0x2a80000 0x20000>; + reg-names = "peek", "status", "config", + "region", "push", "pop"; + }; + + qmgr1 { + managed-queues = <0x2000 0x2000>; + reg = <0x2a60000 0x20000>, + <0x2a06400 0x400>, + <0x2a04000 0x1000>, + <0x2a05000 0x1000>, + <0x23aa0000 0x20000>, + <0x2aa0000 0x20000>; + reg-names = "peek", "status", "config", + "region", "push", "pop"; + }; + }; + queue-pools { + qpend { + qpend-0 { + qrange = <658 8>; + interrupts =<0 40 0xf04 0 41 0xf04 0 42 0xf04 + 0 43 0xf04 0 44 0xf04 0 45 0xf04 + 0 46 0xf04 0 47 0xf04>; + }; + qpend-1 { + qrange = <8704 16>; + interrupts = <0 48 0xf04 0 49 0xf04 0 50 0xf04 + 0 51 0xf04 0 52 0xf04 0 53 0xf04 + 0 54 0xf04 0 55 0xf04 0 56 0xf04 + 0 57 0xf04 0 58 0xf04 0 59 0xf04 + 0 60 0xf04 0 61 0xf04 0 62 0xf04 + 0 63 0xf04>; + qalloc-by-id; + }; + qpend-2 { + qrange = <8720 16>; + interrupts = <0 64 0xf04 0 65 0xf04 0 66 0xf04 + 0 59 0xf04 0 68 0xf04 0 69 0xf04 + 0 70 0xf04 0 71 0xf04 0 72 0xf04 + 0 73 0xf04 0 74 0xf04 0 75 0xf04 + 0 76 0xf04 0 77 0xf04 0 78 0xf04 + 0 79 0xf04>; + }; + }; + general-purpose { + gp-0 { + qrange = <4000 64>; + }; + netcp-tx { + qrange = <640 9>; + qalloc-by-id; + }; + netcpx-tx { + qrange = <8752 8>; + qalloc-by-id; + }; + }; + }; + descriptor-regions { + #address-cells = <1>; + #size-cells = <1>; + ranges; + region-12 { + id = <12>; + region-spec = <8192 128>; /* num_desc desc_size */ + link-index = <0x4000>; + }; + }; +}; /* qmss */ + +knav_dmas: knav_dmas@0 { + compatible = "ti,keystone-navigator-dma"; + clocks = <&papllclk>; + #address-cells = <1>; + #size-cells = <1>; + ranges; + ti,navigator-cloud-address = <0x23a80000 0x23a90000 + 0x23aa0000 0x23ab0000>; + + dma_gbe: dma_gbe@0 { + reg = <0x2004000 0x100>, + <0x2004400 0x120>, + <0x2004800 0x300>, + <0x2004c00 0x120>, + <0x2005000 0x400>; + reg-names = "global", "txchan", "rxchan", + "txsched", "rxflow"; + }; +}; + +netcp: netcp@2000000 { + reg = <0x2620110 0x8>; + reg-names = "efuse"; + compatible = "ti,netcp-1.0"; + #address-cells = <1>; + #size-cells = <1>; + + /* NetCP address range */ + ranges = <0 0x2000000 0x100000>; + + clocks = <&papllclk>, <&clkcpgmac>, <&chipclk12>; + dma-coherent; + + ti,navigator-dmas = <&dma_gbe 22>, + <&dma_gbe 23>, + <&dma_gbe 8>; + ti,navigator-dma-names = "netrx0", "netrx1", "nettx"; + + netcp-devices { + ranges; + #address-cells = <1>; + #size-cells = <1>; + gbe@90000 { /* ETHSS */ + #address-cells = <1>; + #size-cells = <1>; + label = "netcp-gbe"; + compatible = "ti,netcp-gbe"; + reg = <0x90000 0x300>, <0x90400 0x400>, <0x90800 0x700>; + /* enable-ale; */ + tx-queue = <648>; + tx-channel = "nettx"; + + interfaces { + gbe0: interface-0 { + slave-port = <0>; + link-interface = <1>; + phy-handle = <ðphy0>; + }; + gbe1: interface-1 { + slave-port = <1>; + link-interface = <1>; + phy-handle = <ðphy1>; + }; + }; + + secondary-slave-ports { + port-2 { + slave-port = <2>; + link-interface = <2>; + }; + port-3 { + slave-port = <3>; + link-interface = <2>; + }; + }; + }; + }; + + netcp-interfaces { + interface-0 { + rx-channel = "netrx0"; + rx-pool = <1024 12>; + tx-pool = <1024 12>; + rx-queue-depth = <128 128 0 0>; + rx-buffer-size = <1518 4096 0 0>; + rx-queue = <8704>; + tx-completion-queue = <8706>; + efuse-mac = <1>; + netcp-gbe = <&gbe0>; + + }; + interface-1 { + rx-channel = "netrx1"; + rx-pool = <1024 12>; + tx-pool = <1024 12>; + rx-queue-depth = <128 128 0 0>; + rx-buffer-size = <1518 4096 0 0>; + rx-queue = <8705>; + tx-completion-queue = <8707>; + efuse-mac = <0>; + local-mac-address = [02 18 31 7e 3e 6f]; + netcp-gbe = <&gbe1>; + }; + }; +}; diff --git a/arch/arm/boot/dts/k2hk.dtsi b/arch/arm/boot/dts/k2hk.dtsi index d721f4b73..d0810a5f2 100644 --- a/arch/arm/boot/dts/k2hk.dtsi +++ b/arch/arm/boot/dts/k2hk.dtsi @@ -98,5 +98,17 @@ #gpio-cells = <2>; gpio,syscon-dev = <&devctrl 0x25c>; }; + + mdio: mdio@02090300 { + compatible = "ti,keystone_mdio", "ti,davinci_mdio"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x02090300 0x100>; + status = "disabled"; + clocks = <&clkcpgmac>; + clock-names = "fck"; + bus_freq = <2500000>; + }; + /include/ "k2hk-netcp.dtsi" }; }; diff --git a/arch/arm/boot/dts/k2l-evm.dts b/arch/arm/boot/dts/k2l-evm.dts index 85cc7f287..9a69a6b55 100644 --- a/arch/arm/boot/dts/k2l-evm.dts +++ b/arch/arm/boot/dts/k2l-evm.dts @@ -118,6 +118,7 @@ }; &mdio { + status = "ok"; ethphy0: ethernet-phy@0 { compatible = "marvell,88E1514", "marvell,88E1510", "ethernet-phy-ieee802.3-c22"; reg = <0>; diff --git a/arch/arm/boot/dts/k2l-netcp.dtsi b/arch/arm/boot/dts/k2l-netcp.dtsi new file mode 100644 index 000000000..6b95284d1 --- /dev/null +++ b/arch/arm/boot/dts/k2l-netcp.dtsi @@ -0,0 +1,189 @@ +/* + * Device Tree Source for Keystone 2 Lamarr Netcp driver + * + * Copyright 2015 Texas Instruments, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +qmss: qmss@2a40000 { + compatible = "ti,keystone-navigator-qmss"; + dma-coherent; + #address-cells = <1>; + #size-cells = <1>; + clocks = <&chipclk13>; + ranges; + queue-range = <0 0x2000>; + linkram0 = <0x100000 0x4000>; + linkram1 = <0x70000000 0x10000>; /* 1MB OSR mem */ + + qmgrs { + #address-cells = <1>; + #size-cells = <1>; + ranges; + qmgr0 { + managed-queues = <0 0x2000>; + reg = <0x2a40000 0x20000>, + <0x2a06000 0x400>, + <0x2a02000 0x1000>, + <0x2a03000 0x1000>, + <0x23a80000 0x20000>, + <0x2a80000 0x20000>; + reg-names = "peek", "status", "config", + "region", "push", "pop"; + }; + }; + queue-pools { + qpend { + qpend-0 { + qrange = <658 8>; + interrupts =<0 40 0xf04 0 41 0xf04 0 42 0xf04 + 0 43 0xf04 0 44 0xf04 0 45 0xf04 + 0 46 0xf04 0 47 0xf04>; + }; + qpend-1 { + qrange = <528 16>; + interrupts = <0 48 0xf04 0 49 0xf04 0 50 0xf04 + 0 51 0xf04 0 52 0xf04 0 53 0xf04 + 0 54 0xf04 0 55 0xf04 0 56 0xf04 + 0 57 0xf04 0 58 0xf04 0 59 0xf04 + 0 60 0xf04 0 61 0xf04 0 62 0xf04 + 0 63 0xf04>; + qalloc-by-id; + }; + qpend-2 { + qrange = <544 16>; + interrupts = <0 64 0xf04 0 65 0xf04 0 66 0xf04 + 0 59 0xf04 0 68 0xf04 0 69 0xf04 + 0 70 0xf04 0 71 0xf04 0 72 0xf04 + 0 73 0xf04 0 74 0xf04 0 75 0xf04 + 0 76 0xf04 0 77 0xf04 0 78 0xf04 + 0 79 0xf04>; + }; + }; + general-purpose { + gp-0 { + qrange = <4000 64>; + }; + netcp-tx { + qrange = <896 128>; + qalloc-by-id; + }; + }; + }; + descriptor-regions { + #address-cells = <1>; + #size-cells = <1>; + ranges; + region-12 { + id = <12>; + region-spec = <8192 128>; /* num_desc desc_size */ + link-index = <0x4000>; + }; + }; +}; /* qmss */ + +knav_dmas: knav_dmas@0 { + compatible = "ti,keystone-navigator-dma"; + clocks = <&papllclk>; + #address-cells = <1>; + #size-cells = <1>; + ranges; + ti,navigator-cloud-address = <0x23a80000 0x23a90000>; + + dma_gbe: dma_gbe@0 { + reg = <0x26186000 0x100>, + <0x26187000 0x2a0>, + <0x26188000 0xb60>, + <0x26186100 0x80>, + <0x26189000 0x1000>; + reg-names = "global", "txchan", "rxchan", + "txsched", "rxflow"; + }; +}; + +netcp: netcp@26000000 { + reg = <0x2620110 0x8>; + reg-names = "efuse"; + compatible = "ti,netcp-1.0"; + #address-cells = <1>; + #size-cells = <1>; + + /* NetCP address range */ + ranges = <0 0x26000000 0x1000000>; + + clocks = <&papllclk>, <&clkcpgmac>, <&chipclk12>; + dma-coherent; + + ti,navigator-dmas = <&dma_gbe 0>, + <&dma_gbe 8>, + <&dma_gbe 0>; + ti,navigator-dma-names = "netrx0", "netrx1", "nettx"; + + netcp-devices { + #address-cells = <1>; + #size-cells = <1>; + ranges; + gbe@200000 { /* ETHSS */ + label = "netcp-gbe"; + compatible = "ti,netcp-gbe-5"; + reg = <0x200000 0x900>, <0x220000 0x20000>; + /* enable-ale; */ + tx-queue = <896>; + tx-channel = "nettx"; + + interfaces { + gbe0: interface-0 { + slave-port = <0>; + link-interface = <1>; + phy-handle = <ðphy0>; + }; + gbe1: interface-1 { + slave-port = <1>; + link-interface = <1>; + phy-handle = <ðphy1>; + }; + }; + + secondary-slave-ports { + port-2 { + slave-port = <2>; + link-interface = <2>; + }; + port-3 { + slave-port = <3>; + link-interface = <2>; + }; + }; + }; + }; + + netcp-interfaces { + interface-0 { + rx-channel = "netrx0"; + rx-pool = <1024 12>; + tx-pool = <1024 12>; + rx-queue-depth = <128 128 0 0>; + rx-buffer-size = <1518 4096 0 0>; + rx-queue = <528>; + tx-completion-queue = <530>; + efuse-mac = <1>; + netcp-gbe = <&gbe0>; + + }; + interface-1 { + rx-channel = "netrx1"; + rx-pool = <1024 12>; + tx-pool = <1024 12>; + rx-queue-depth = <128 128 0 0>; + rx-buffer-size = <1518 4096 0 0>; + rx-queue = <529>; + tx-completion-queue = <531>; + efuse-mac = <0>; + local-mac-address = [02 18 31 7e 3e 7f]; + netcp-gbe = <&gbe1>; + }; + }; +}; diff --git a/arch/arm/boot/dts/k2l.dtsi b/arch/arm/boot/dts/k2l.dtsi index e32c3baa7..49fd414f6 100644 --- a/arch/arm/boot/dts/k2l.dtsi +++ b/arch/arm/boot/dts/k2l.dtsi @@ -29,7 +29,6 @@ }; soc { - /include/ "k2l-clocks.dtsi" uart2: serial@02348400 { @@ -79,6 +78,18 @@ #gpio-cells = <2>; gpio,syscon-dev = <&devctrl 0x24c>; }; + + mdio: mdio@26200f00 { + compatible = "ti,keystone_mdio", "ti,davinci_mdio"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x26200f00 0x100>; + status = "disabled"; + clocks = <&clkcpgmac>; + clock-names = "fck"; + bus_freq = <2500000>; + }; + /include/ "k2l-netcp.dtsi" }; }; @@ -95,7 +106,3 @@ /* Pin muxed. Enabled and configured by Bootloader */ status = "disabled"; }; - -&mdio { - reg = <0x26200f00 0x100>; -}; diff --git a/arch/arm/boot/dts/keystone.dtsi b/arch/arm/boot/dts/keystone.dtsi index c06542b2c..72816d65f 100644 --- a/arch/arm/boot/dts/keystone.dtsi +++ b/arch/arm/boot/dts/keystone.dtsi @@ -267,17 +267,6 @@ 1 0 0x21000A00 0x00000100>; }; - mdio: mdio@02090300 { - compatible = "ti,keystone_mdio", "ti,davinci_mdio"; - #address-cells = <1>; - #size-cells = <0>; - reg = <0x02090300 0x100>; - status = "disabled"; - clocks = <&clkpa>; - clock-names = "fck"; - bus_freq = <2500000>; - }; - kirq0: keystone_irq@26202a0 { compatible = "ti,keystone-irq"; interrupts = <GIC_SPI 4 IRQ_TYPE_EDGE_RISING>; @@ -286,7 +275,7 @@ ti,syscon-dev = <&devctrl 0x2a0>; }; - pcie@21800000 { + pcie0: pcie@21800000 { compatible = "ti,keystone-pcie", "snps,dw-pcie"; clocks = <&clkpcie>; clock-names = "pcie"; @@ -296,6 +285,7 @@ ranges = <0x81000000 0 0 0x23250000 0 0x4000 0x82000000 0 0x50000000 0x50000000 0 0x10000000>; + status = "disabled"; device_type = "pci"; num-lanes = <2>; diff --git a/arch/arm/boot/dts/kirkwood-b3.dts b/arch/arm/boot/dts/kirkwood-b3.dts index c9247f867..d2936ad3a 100644 --- a/arch/arm/boot/dts/kirkwood-b3.dts +++ b/arch/arm/boot/dts/kirkwood-b3.dts @@ -74,7 +74,7 @@ m25p16@0 { #address-cells = <1>; #size-cells = <1>; - compatible = "st,m25p16"; + compatible = "st,m25p16", "jedec,spi-nor"; reg = <0>; spi-max-frequency = <40000000>; mode = <0>; diff --git a/arch/arm/boot/dts/kirkwood-cloudbox.dts b/arch/arm/boot/dts/kirkwood-cloudbox.dts index ab6ab4933..7ec76566a 100644 --- a/arch/arm/boot/dts/kirkwood-cloudbox.dts +++ b/arch/arm/boot/dts/kirkwood-cloudbox.dts @@ -42,7 +42,7 @@ flash@0 { #address-cells = <1>; #size-cells = <1>; - compatible = "mxicy,mx25l4005a"; + compatible = "mxicy,mx25l4005a", "jedec,spi-nor"; reg = <0>; spi-max-frequency = <20000000>; mode = <0>; diff --git a/arch/arm/boot/dts/kirkwood-dir665.dts b/arch/arm/boot/dts/kirkwood-dir665.dts index 786959ee9..0473fcc26 100644 --- a/arch/arm/boot/dts/kirkwood-dir665.dts +++ b/arch/arm/boot/dts/kirkwood-dir665.dts @@ -93,7 +93,7 @@ m25p80@0 { #address-cells = <1>; #size-cells = <1>; - compatible = "mxicy,mx25l12805d"; + compatible = "mxicy,mx25l12805d", "jedec,spi-nor"; spi-max-frequency = <50000000>; reg = <0>; diff --git a/arch/arm/boot/dts/kirkwood-dreamplug.dts b/arch/arm/boot/dts/kirkwood-dreamplug.dts index 6467c7924..e2abc8246 100644 --- a/arch/arm/boot/dts/kirkwood-dreamplug.dts +++ b/arch/arm/boot/dts/kirkwood-dreamplug.dts @@ -42,7 +42,7 @@ m25p40@0 { #address-cells = <1>; #size-cells = <1>; - compatible = "mxicy,mx25l1606e"; + compatible = "mxicy,mx25l1606e", "jedec,spi-nor"; reg = <0>; spi-max-frequency = <50000000>; mode = <0>; diff --git a/arch/arm/boot/dts/kirkwood-lsxl.dtsi b/arch/arm/boot/dts/kirkwood-lsxl.dtsi index 53484474d..1d6528d82 100644 --- a/arch/arm/boot/dts/kirkwood-lsxl.dtsi +++ b/arch/arm/boot/dts/kirkwood-lsxl.dtsi @@ -74,7 +74,7 @@ m25p40@0 { #address-cells = <1>; #size-cells = <1>; - compatible = "m25p40"; + compatible = "m25p40", "jedec,spi-nor"; reg = <0>; spi-max-frequency = <25000000>; mode = <0>; diff --git a/arch/arm/boot/dts/kirkwood-mv88f6281gtw-ge.dts b/arch/arm/boot/dts/kirkwood-mv88f6281gtw-ge.dts index f82827d6f..b7e7d78c4 100644 --- a/arch/arm/boot/dts/kirkwood-mv88f6281gtw-ge.dts +++ b/arch/arm/boot/dts/kirkwood-mv88f6281gtw-ge.dts @@ -65,7 +65,7 @@ flash@0 { #address-cells = <1>; #size-cells = <1>; - compatible = "mxicy,mx25l12805d"; + compatible = "mxicy,mx25l12805d", "jedec,spi-nor"; reg = <0>; spi-max-frequency = <50000000>; mode = <0>; diff --git a/arch/arm/boot/dts/kirkwood-netxbig.dtsi b/arch/arm/boot/dts/kirkwood-netxbig.dtsi index b0cfb7cd3..1508b1214 100644 --- a/arch/arm/boot/dts/kirkwood-netxbig.dtsi +++ b/arch/arm/boot/dts/kirkwood-netxbig.dtsi @@ -33,7 +33,7 @@ flash@0 { #address-cells = <1>; #size-cells = <1>; - compatible = "mxicy,mx25l4005a"; + compatible = "mxicy,mx25l4005a", "jedec,spi-nor"; reg = <0>; spi-max-frequency = <20000000>; mode = <0>; diff --git a/arch/arm/boot/dts/kirkwood-ns2-common.dtsi b/arch/arm/boot/dts/kirkwood-ns2-common.dtsi index fe6c0246d..e832b6320 100644 --- a/arch/arm/boot/dts/kirkwood-ns2-common.dtsi +++ b/arch/arm/boot/dts/kirkwood-ns2-common.dtsi @@ -29,7 +29,7 @@ flash@0 { #address-cells = <1>; #size-cells = <1>; - compatible = "mxicy,mx25l4005a"; + compatible = "mxicy,mx25l4005a", "jedec,spi-nor"; reg = <0>; spi-max-frequency = <20000000>; mode = <0>; diff --git a/arch/arm/boot/dts/kirkwood-rd88f6192.dts b/arch/arm/boot/dts/kirkwood-rd88f6192.dts index 35a29dee8..e0b959396 100644 --- a/arch/arm/boot/dts/kirkwood-rd88f6192.dts +++ b/arch/arm/boot/dts/kirkwood-rd88f6192.dts @@ -61,7 +61,7 @@ m25p128@0 { #address-cells = <1>; #size-cells = <1>; - compatible = "st,m25p128"; + compatible = "st,m25p128", "jedec,spi-nor"; reg = <0>; spi-max-frequency = <20000000>; mode = <0>; diff --git a/arch/arm/boot/dts/kirkwood-synology.dtsi b/arch/arm/boot/dts/kirkwood-synology.dtsi index 8be5b2e46..04015c174 100644 --- a/arch/arm/boot/dts/kirkwood-synology.dtsi +++ b/arch/arm/boot/dts/kirkwood-synology.dtsi @@ -217,7 +217,7 @@ m25p80@0 { #address-cells = <1>; #size-cells = <1>; - compatible = "st,m25p80"; + compatible = "st,m25p80", "jedec,spi-nor"; reg = <0>; spi-max-frequency = <20000000>; mode = <0>; diff --git a/arch/arm/boot/dts/kirkwood-t5325.dts b/arch/arm/boot/dts/kirkwood-t5325.dts index 610ec0f95..ed956b849 100644 --- a/arch/arm/boot/dts/kirkwood-t5325.dts +++ b/arch/arm/boot/dts/kirkwood-t5325.dts @@ -88,7 +88,7 @@ flash@0 { #address-cells = <1>; #size-cells = <1>; - compatible = "st,m25p80"; + compatible = "st,m25p80", "jedec,spi-nor"; spi-max-frequency = <86000000>; reg = <0>; mode = <0>; diff --git a/arch/arm/boot/dts/kirkwood-ts219.dtsi b/arch/arm/boot/dts/kirkwood-ts219.dtsi index df7f15276..c56ab6bbf 100644 --- a/arch/arm/boot/dts/kirkwood-ts219.dtsi +++ b/arch/arm/boot/dts/kirkwood-ts219.dtsi @@ -49,7 +49,7 @@ m25p128@0 { #address-cells = <1>; #size-cells = <1>; - compatible = "m25p128"; + compatible = "m25p128", "jedec,spi-nor"; reg = <0>; spi-max-frequency = <20000000>; mode = <0>; diff --git a/arch/arm/boot/dts/kizbox.dts b/arch/arm/boot/dts/kizbox.dts deleted file mode 100644 index e83e4f931..000000000 --- a/arch/arm/boot/dts/kizbox.dts +++ /dev/null @@ -1,150 +0,0 @@ -/* - * kizbox.dts - Device Tree file for Overkiz Kizbox board - * - * Copyright (C) 2012 Boris BREZILLON <linux-arm@overkiz.com> - * - * Licensed under GPLv2. - */ -/dts-v1/; -#include "at91sam9g20.dtsi" - -/ { - - model = "Overkiz kizbox"; - compatible = "overkiz,kizbox", "atmel,at91sam9g20", "atmel,at91sam9"; - - chosen { - bootargs = "panic=5 ubi.mtd=1 rootfstype=ubifs root=ubi0:root"; - }; - - memory { - reg = <0x20000000 0x2000000>; - }; - - clocks { - #address-cells = <1>; - #size-cells = <1>; - ranges; - - main_clock: clock@0 { - compatible = "atmel,osc", "fixed-clock"; - clock-frequency = <18432000>; - }; - - main_xtal { - clock-frequency = <18432000>; - }; - }; - - ahb { - apb { - dbgu: serial@fffff200 { - status = "okay"; - }; - - usart0: serial@fffb0000 { - status = "okay"; - }; - - usart1: serial@fffb4000 { - status = "okay"; - }; - - macb0: ethernet@fffc4000 { - phy-mode = "mii"; - pinctrl-0 = <&pinctrl_macb_rmii - &pinctrl_macb_rmii_mii_alt>; - status = "okay"; - }; - - watchdog@fffffd40 { - timeout-sec = <15>; - atmel,max-heartbeat-sec = <16>; - atmel,min-heartbeat-sec = <0>; - status = "okay"; - }; - }; - - nand0: nand@40000000 { - nand-bus-width = <8>; - nand-ecc-mode = "soft"; - status = "okay"; - - bootloaderkernel@0 { - label = "bootloader-kernel"; - reg = <0x0 0xc0000>; - }; - - ubi@c0000 { - label = "ubi"; - reg = <0xc0000 0x7f40000>; - }; - - }; - - usb0: ohci@00500000 { - num-ports = <1>; - status = "okay"; - }; - }; - - i2c@0 { - status = "okay"; - - pcf8563@51 { - /* nxp pcf8563 rtc */ - compatible = "nxp,pcf8563"; - reg = <0x51>; - }; - - }; - - leds { - compatible = "gpio-leds"; - - led1g { - label = "led1:green"; - gpios = <&pioB 0 GPIO_ACTIVE_LOW>; - linux,default-trigger = "none"; - }; - - led1r { - label = "led1:red"; - gpios = <&pioB 1 GPIO_ACTIVE_LOW>; - linux,default-trigger = "none"; - }; - - led2g { - label = "led2:green"; - gpios = <&pioB 2 GPIO_ACTIVE_LOW>; - linux,default-trigger = "none"; - default-state = "on"; - }; - - led2r { - label = "led2:red"; - gpios = <&pioB 3 GPIO_ACTIVE_LOW>; - linux,default-trigger = "none"; - }; - }; - - gpio_keys { - compatible = "gpio-keys"; - #address-cells = <1>; - #size-cells = <0>; - - reset { - label = "reset"; - gpios = <&pioB 30 GPIO_ACTIVE_LOW>; - linux,code = <0x100>; - gpio-key,wakeup; - }; - - mode { - label = "mode"; - gpios = <&pioB 31 GPIO_ACTIVE_LOW>; - linux,code = <0x101>; - gpio-key,wakeup; - }; - }; -}; diff --git a/arch/arm/boot/dts/logicpd-torpedo-37xx-devkit.dts b/arch/arm/boot/dts/logicpd-torpedo-37xx-devkit.dts new file mode 100644 index 000000000..91146c318 --- /dev/null +++ b/arch/arm/boot/dts/logicpd-torpedo-37xx-devkit.dts @@ -0,0 +1,157 @@ +/* + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +/dts-v1/; + +#include "omap36xx.dtsi" +#include "logicpd-torpedo-som.dtsi" +#include "omap-gpmc-smsc9221.dtsi" + +/ { + model = "LogicPD Zoom DM3730 Torpedo Development Kit"; + compatible = "logicpd,dm3730-torpedo-devkit", "ti,omap36xx"; + + gpio_keys { + compatible = "gpio-keys"; + pinctrl-names = "default"; + pinctrl-0 = <&gpio_key_pins &gpio_key_pins_wkup>; + + sysboot2 { + label = "sysboot2"; + gpios = <&gpio1 2 GPIO_ACTIVE_LOW>; /* gpio2 */ + linux,code = <BTN_0>; + gpio-key,wakeup; + }; + + sysboot5 { + label = "sysboot5"; + gpios = <&gpio1 7 GPIO_ACTIVE_LOW>; /* gpio7 */ + linux,code = <BTN_1>; + gpio-key,wakeup; + }; + + gpio1 { + label = "gpio1"; + gpios = <&gpio6 21 GPIO_ACTIVE_LOW>; /* gpio181 */ + linux,code = <BTN_2>; + gpio-key,wakeup; + }; + + gpio2 { + label = "gpio2"; + gpios = <&gpio6 18 GPIO_ACTIVE_LOW>; /* gpio178 */ + linux,code = <BTN_3>; + gpio-key,wakeup; + }; + }; + + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&led_pins>; + + led1 { + label = "led1"; + gpios = <&gpio6 20 GPIO_ACTIVE_HIGH>; /* gpio180 */ + linux,default-trigger = "cpu0"; + }; + + led2 { + label = "led2"; + gpios = <&gpio6 19 GPIO_ACTIVE_HIGH>; /* gpio179 */ + linux,default-trigger = "none"; + }; + }; +}; + +&charger { + ti,bb-uvolt = <3200000>; + ti,bb-uamp = <150>; +}; + +&gpmc { + ranges = <1 0 0x08000000 0x1000000>; /* CS1: 16MB for LAN9221 */ + + ethernet@gpmc { + pinctrl-names = "default"; + pinctrl-0 = <&lan9221_pins>; + interrupt-parent = <&gpio5>; + interrupts = <1 IRQ_TYPE_LEVEL_LOW>; /* gpio129 */ + reg = <1 0 0xff>; + }; +}; + +&mmc1 { + interrupts-extended = <&intc 83 &omap3_pmx_core 0x11a>; + pinctrl-names = "default"; + pinctrl-0 = <&mmc1_pins &mmc1_cd>; + cd-gpios = <&gpio4 31 IRQ_TYPE_LEVEL_LOW>; /* gpio127 */ + vmmc-supply = <&vmmc1>; + bus-width = <4>; + cap-power-off-card; +}; + +&omap3_pmx_core { + gpio_key_pins: pinmux_gpio_key_pins { + pinctrl-single,pins = < + OMAP3_CORE1_IOPAD(0x21d6, PIN_INPUT_PULLUP | MUX_MODE4) /* mcspi2_clk.gpio_178 */ + OMAP3_CORE1_IOPAD(0x21dc, PIN_INPUT_PULLUP | MUX_MODE4) /* mcspi2_cs0.gpio_181 */ + >; + }; + + led_pins: pinmux_led_pins { + pinctrl-single,pins = < + OMAP3_CORE1_IOPAD(0x21d8, PIN_OUTPUT | MUX_MODE4) /* gpio_179 */ + OMAP3_CORE1_IOPAD(0x21da, PIN_OUTPUT | MUX_MODE4) /* gpio_180 */ + >; + }; + + mmc1_pins: pinmux_mmc1_pins { + pinctrl-single,pins = < + OMAP3_CORE1_IOPAD(0x2144, PIN_OUTPUT | MUX_MODE0) /* sdmmc1_clk.sdmmc1_clk */ + OMAP3_CORE1_IOPAD(0x2146, PIN_INPUT | MUX_MODE0) /* sdmmc1_cmd.sdmmc1_cmd */ + OMAP3_CORE1_IOPAD(0x2148, PIN_INPUT | MUX_MODE0) /* sdmmc1_dat0.sdmmc1_dat0 */ + OMAP3_CORE1_IOPAD(0x214a, PIN_INPUT | MUX_MODE0) /* sdmmc1_dat1.sdmmc1_dat1 */ + OMAP3_CORE1_IOPAD(0x214c, PIN_INPUT | MUX_MODE0) /* sdmmc1_dat2.sdmmc1_dat2 */ + OMAP3_CORE1_IOPAD(0x214e, PIN_INPUT | MUX_MODE0) /* sdmmc1_dat3.sdmmc1_dat3 */ + >; + }; +}; + +&omap3_pmx_wkup { + gpio_key_pins_wkup: pinmux_gpio_key_pins_wkup { + pinctrl-single,pins = < + OMAP3_WKUP_IOPAD(0x2a0a, PIN_INPUT_PULLUP | MUX_MODE4) /* sys_boot0.gpio_2 */ + OMAP3_WKUP_IOPAD(0x2a14, PIN_INPUT_PULLUP | MUX_MODE4) /* sys_boot5.gpio_7 */ + >; + }; + + lan9221_pins: pinmux_lan9221_pins { + pinctrl-single,pins = < + OMAP3_WKUP_IOPAD(0x2a5a, PIN_INPUT | MUX_MODE4) /* reserved.gpio_129 */ + >; + }; + + mmc1_cd: pinmux_mmc1_cd { + pinctrl-single,pins = < + OMAP3_WKUP_IOPAD(0x2a54, PIN_INPUT_PULLUP | MUX_MODE4) /* reserved.gpio_127 */ + >; + }; +}; + +&uart1 { + interrupts-extended = <&intc 72 &omap3_pmx_core OMAP3_UART1_RX>; +}; + +/* Wired to the tps65950 on the SOM, only the USB connector is on the devkit */ +&usb_otg_hs { + interface-type = <0>; + usb-phy = <&usb2_phy>; + phys = <&usb2_phy>; + phy-names = "usb2-phy"; + mode = <3>; + power = <50>; +}; diff --git a/arch/arm/boot/dts/logicpd-torpedo-som.dtsi b/arch/arm/boot/dts/logicpd-torpedo-som.dtsi new file mode 100644 index 000000000..36387b114 --- /dev/null +++ b/arch/arm/boot/dts/logicpd-torpedo-som.dtsi @@ -0,0 +1,162 @@ +/* + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <dt-bindings/input/input.h> + +/ { + cpus { + cpu@0 { + cpu0-supply = <&vcc>; + }; + }; + + leds { + compatible = "gpio-leds"; + user0 { + label = "user0"; + gpios = <&twl_gpio 18 GPIO_ACTIVE_LOW>; /* LEDA */ + linux,default-trigger = "none"; + }; + }; + + wl12xx_vmmc: wl12xx_vmmc { + compatible = "regulator-fixed"; + regulator-name = "vwl1271"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + gpio = <&gpio5 29 0>; /* gpio157 */ + startup-delay-us = <70000>; + enable-active-high; + vin-supply = <&vmmc2>; + }; +}; + +&gpmc { + ranges = <0 0 0x00000000 0x1000000>; /* CS0: 16MB for NAND */ + + nand@0,0 { + linux,mtd-name = "micron,mt29f4g16abbda3w"; + reg = <0 0 4>; /* CS0, offset 0, IO size 4 */ + nand-bus-width = <16>; + ti,nand-ecc-opt = "bch8"; + gpmc,sync-clk-ps = <0>; + gpmc,cs-on-ns = <0>; + gpmc,cs-rd-off-ns = <44>; + gpmc,cs-wr-off-ns = <44>; + gpmc,adv-on-ns = <6>; + gpmc,adv-rd-off-ns = <34>; + gpmc,adv-wr-off-ns = <44>; + gpmc,we-off-ns = <40>; + gpmc,oe-off-ns = <54>; + gpmc,access-ns = <64>; + gpmc,rd-cycle-ns = <82>; + gpmc,wr-cycle-ns = <82>; + gpmc,wr-access-ns = <40>; + gpmc,wr-data-mux-bus-ns = <0>; + gpmc,device-width = <2>; + #address-cells = <1>; + #size-cells = <1>; + + /* u-boot uses mtdparts=omap2-nand.0:512k(x-loader),1920k(u-boot),128k(u-boot-env),4m(kernel),-(fs) */ + + x-loader@0 { + label = "x-loader"; + reg = <0 0x80000>; + }; + + bootloaders@80000 { + label = "u-boot"; + reg = <0x80000 0x1e0000>; + }; + + bootloaders_env@260000 { + label = "u-boot-env"; + reg = <0x260000 0x20000>; + }; + + kernel@280000 { + label = "kernel"; + reg = <0x280000 0x400000>; + }; + + filesystem@680000 { + label = "fs"; + reg = <0x680000 0>; /* 0 = MTDPART_SIZ_FULL */ + }; + }; +}; + +&i2c1 { + clock-frequency = <2600000>; + + twl: twl@48 { + reg = <0x48>; + interrupts = <7>; /* SYS_NIRQ cascaded to intc */ + interrupt-parent = <&intc>; + }; +}; + +/* + * Only found on the wireless SOM. For the SOM without wireless, the pins for + * MMC3 can be routed with jumpers to the second MMC slot on the devkit and + * gpio157 is not connected. So this should be OK to keep common for now, + * probably device tree overlays is the way to go with the various SOM and + * jumpering combinations for the long run. + */ +&mmc3 { + interrupts-extended = <&intc 94 &omap3_pmx_core2 0x46>; + pinctrl-0 = <&mmc3_pins &mmc3_core2_pins>; + pinctrl-names = "default"; + vmmc-supply = <&wl12xx_vmmc>; + non-removable; + bus-width = <4>; + cap-power-off-card; + #address-cells = <1>; + #size-cells = <0>; + wlcore: wlcore@2 { + compatible = "ti,wl1283"; + reg = <2>; + interrupt-parent = <&gpio5>; + interrupts = <24 IRQ_TYPE_LEVEL_HIGH>; /* gpio 152 */ + ref-clock-frequency = <26000000>; + }; +}; + +&omap3_pmx_core { + mmc3_pins: pinmux_mm3_pins { + pinctrl-single,pins = < + OMAP3_CORE1_IOPAD(0x2164, PIN_INPUT_PULLUP | MUX_MODE3) /* sdmmc2_dat4.sdmmc3_dat0 */ + OMAP3_CORE1_IOPAD(0x2166, PIN_INPUT_PULLUP | MUX_MODE3) /* sdmmc2_dat5.sdmmc3_dat1 */ + OMAP3_CORE1_IOPAD(0x2168, PIN_INPUT_PULLUP | MUX_MODE3) /* sdmmc2_dat6.sdmmc3_dat2 */ + OMAP3_CORE1_IOPAD(0x216a, PIN_INPUT_PULLUP | MUX_MODE3) /* sdmmc2_dat6.sdmmc3_dat3 */ + OMAP3_CORE1_IOPAD(0x2184, PIN_INPUT_PULLUP | MUX_MODE4) /* mcbsp4_clkx.gpio_152 */ + OMAP3_CORE1_IOPAD(0x218e, PIN_OUTPUT | MUX_MODE4) /* mcbsp1_fsr.gpio_157 */ + >; + }; +}; + +&omap3_pmx_core2 { + mmc3_core2_pins: pinmux_mmc3_core2_pins { + pinctrl-single,pins = < + OMAP3630_CORE2_IOPAD(0x25d8, PIN_INPUT_PULLUP | MUX_MODE2) /* etk_clk.sdmmc3_clk */ + OMAP3630_CORE2_IOPAD(0x25da, PIN_INPUT_PULLUP | MUX_MODE2) /* etk_ctl.sdmmc3_cmd */ + >; + }; +}; + +#include "twl4030.dtsi" +#include "twl4030_omap3.dtsi" + +&twl { + twl_power: power { + compatible = "ti,twl4030-power-idle-osc-off", "ti,twl4030-power-idle"; + ti,use_poweroff; + }; +}; + +&twl_gpio { + ti,use-leds; +}; diff --git a/arch/arm/boot/dts/lpc18xx.dtsi b/arch/arm/boot/dts/lpc18xx.dtsi new file mode 100644 index 000000000..204da5b52 --- /dev/null +++ b/arch/arm/boot/dts/lpc18xx.dtsi @@ -0,0 +1,114 @@ +/* + * Common base for NXP LPC18xx and LPC43xx devices. + * + * Copyright 2015 Joachim Eastwood <manabian@gmail.com> + * + * This code is released using a dual license strategy: BSD/GPL + * You can choose the licence that better fits your requirements. + * + * Released under the terms of 3-clause BSD License + * Released under the terms of GNU General Public License Version 2.0 + * + */ + +#include "armv7-m.dtsi" + +/ { + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu@0 { + compatible = "arm,cortex-m3"; + device_type = "cpu"; + reg = <0x0>; + }; + }; + + clocks { + xtal: xtal { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <12000000>; + }; + + /* Temporary hardcode PLL1 until clk drivers are merged */ + pll1: pll1 { + compatible = "fixed-factor-clock"; + clocks = <&xtal>; + #clock-cells = <0>; + clock-div = <1>; + clock-mult = <12>; + }; + }; + + soc { + uart0: serial@40081000 { + compatible = "ns16550a"; + reg = <0x40081000 0x1000>; + reg-shift = <2>; + interrupts = <24>; + clocks = <&pll1>; + status = "disabled"; + }; + + uart1: serial@40082000 { + compatible = "ns16550a"; + reg = <0x40082000 0x1000>; + reg-shift = <2>; + interrupts = <25>; + clocks = <&pll1>; + status = "disabled"; + }; + + timer0: timer@40084000 { + compatible = "nxp,lpc3220-timer"; + reg = <0x40084000 0x1000>; + interrupts = <12>; + clocks = <&pll1>; + clock-names = "timerclk"; + }; + + timer1: timer@40085000 { + compatible = "nxp,lpc3220-timer"; + reg = <0x40085000 0x1000>; + interrupts = <13>; + clocks = <&pll1>; + clock-names = "timerclk"; + }; + + uart2: serial@400c1000 { + compatible = "ns16550a"; + reg = <0x400c1000 0x1000>; + reg-shift = <2>; + interrupts = <26>; + clocks = <&pll1>; + status = "disabled"; + }; + + uart3: serial@400c2000 { + compatible = "ns16550a"; + reg = <0x400c2000 0x1000>; + reg-shift = <2>; + interrupts = <27>; + clocks = <&pll1>; + status = "disabled"; + }; + + timer2: timer@400c3000 { + compatible = "nxp,lpc3220-timer"; + reg = <0x400c3000 0x1000>; + interrupts = <14>; + clocks = <&pll1>; + clock-names = "timerclk"; + }; + + timer3: timer@400c4000 { + compatible = "nxp,lpc3220-timer"; + reg = <0x400c4000 0x1000>; + interrupts = <15>; + clocks = <&pll1>; + clock-names = "timerclk"; + }; + }; +}; diff --git a/arch/arm/boot/dts/lpc4350-hitex-eval.dts b/arch/arm/boot/dts/lpc4350-hitex-eval.dts new file mode 100644 index 000000000..d04072f40 --- /dev/null +++ b/arch/arm/boot/dts/lpc4350-hitex-eval.dts @@ -0,0 +1,45 @@ +/* + * Hitex LPC4350 Evaluation Board + * + * Copyright 2015 Ariel D'Alessandro <ariel.dalessandro@gmail.com> + * + * This code is released using a dual license strategy: BSD/GPL + * You can choose the licence that better fits your requirements. + * + * Released under the terms of 3-clause BSD License + * Released under the terms of GNU General Public License Version 2.0 + * + */ +/dts-v1/; + +#include "lpc18xx.dtsi" +#include "lpc4350.dtsi" + +/ { + model = "Hitex LPC4350 Evaluation Board"; + compatible = "hitex,lpc4350-eval-board", "nxp,lpc4350"; + + aliases { + serial0 = &uart0; + serial1 = &uart1; + serial2 = &uart2; + serial3 = &uart3; + }; + + chosen { + stdout-path = &uart0; + }; + + memory { + device_type = "memory"; + reg = <0x28000000 0x800000>; /* 8 MB */ + }; +}; + +&pll1 { + clock-mult = <15>; +}; + +&uart0 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/lpc4350.dtsi b/arch/arm/boot/dts/lpc4350.dtsi new file mode 100644 index 000000000..c4422f587 --- /dev/null +++ b/arch/arm/boot/dts/lpc4350.dtsi @@ -0,0 +1,39 @@ +/* + * NXP LPC4350 and LPC4330 SoC + * + * Copyright 2015 Ariel D'Alessandro <ariel.dalessandro@gmail.com> + * + * This code is released using a dual license strategy: BSD/GPL + * You can choose the licence that better fits your requirements. + * + * Released under the terms of 3-clause BSD License + * Released under the terms of GNU General Public License Version 2.0 + * + */ + +/ { + compatible = "nxp,lpc4350", "nxp,lpc4330"; + + cpus { + cpu@0 { + compatible = "arm,cortex-m4"; + }; + }; + + soc { + sram0: sram@10000000 { + compatible = "mmio-sram"; + reg = <0x10000000 0x20000>; /* 96 + 32 KiB local SRAM */ + }; + + sram1: sram@10080000 { + compatible = "mmio-sram"; + reg = <0x10080000 0x12000>; /* 64 + 8 KiB local SRAM */ + }; + + sram2: sram@20000000 { + compatible = "mmio-sram"; + reg = <0x20000000 0x10000>; /* 4 x 16 KiB AHB SRAM */ + }; + }; +}; diff --git a/arch/arm/boot/dts/lpc4357-ea4357-devkit.dts b/arch/arm/boot/dts/lpc4357-ea4357-devkit.dts new file mode 100644 index 000000000..08a6f757f --- /dev/null +++ b/arch/arm/boot/dts/lpc4357-ea4357-devkit.dts @@ -0,0 +1,41 @@ +/* + * Embedded Artist LPC4357 Developer's Kit + * + * Copyright 2015 Joachim Eastwood <manabian@gmail.com> + * + * This code is released using a dual license strategy: BSD/GPL + * You can choose the licence that better fits your requirements. + * + * Released under the terms of 3-clause BSD License + * Released under the terms of GNU General Public License Version 2.0 + * + */ +/dts-v1/; + +#include "lpc18xx.dtsi" +#include "lpc4357.dtsi" + +/ { + model = "Embedded Artists' LPC4357 Developer's Kit"; + compatible = "ea,lpc4357-developers-kit", "nxp,lpc4357", "nxp,lpc4350"; + + aliases { + serial0 = &uart0; + serial1 = &uart1; + serial2 = &uart2; + serial3 = &uart3; + }; + + chosen { + stdout-path = &uart0; + }; + + memory { + device_type = "memory"; + reg = <0x28000000 0x2000000>; /* 32 MB */ + }; +}; + +&uart0 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/lpc4357.dtsi b/arch/arm/boot/dts/lpc4357.dtsi new file mode 100644 index 000000000..fb9ecc754 --- /dev/null +++ b/arch/arm/boot/dts/lpc4357.dtsi @@ -0,0 +1,39 @@ +/* + * NXP LPC435x, LPC433x, LPC4327, LPC4325, LPC4317 and LPC4315 SoC + * + * Copyright 2015 Joachim Eastwood <manabian@gmail.com> + * + * This code is released using a dual license strategy: BSD/GPL + * You can choose the licence that better fits your requirements. + * + * Released under the terms of 3-clause BSD License + * Released under the terms of GNU General Public License Version 2.0 + * + */ + +/ { + compatible = "nxp,lpc4357"; + + cpus { + cpu@0 { + compatible = "arm,cortex-m4"; + }; + }; + + soc { + sram0: sram@10000000 { + compatible = "mmio-sram"; + reg = <0x10000000 0x8000>; /* 32 KiB local SRAM */ + }; + + sram1: sram@10080000 { + compatible = "mmio-sram"; + reg = <0x10080000 0xa000>; /* 32 + 8 KiB local SRAM */ + }; + + sram2: sram@20000000 { + compatible = "mmio-sram"; + reg = <0x20000000 0x10000>; /* 4 x 16 KiB AHB SRAM */ + }; + }; +}; diff --git a/arch/arm/boot/dts/mt8127.dtsi b/arch/arm/boot/dts/mt8127.dtsi index aaa786233..ca3402e82 100644 --- a/arch/arm/boot/dts/mt8127.dtsi +++ b/arch/arm/boot/dts/mt8127.dtsi @@ -107,7 +107,7 @@ <0 0x10216000 0 0x2000>; }; - uart0: serial@11006000 { + uart0: serial@11002000 { compatible = "mediatek,mt8127-uart","mediatek,mt6577-uart"; reg = <0 0x11002000 0 0x400>; interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_LOW>; @@ -115,7 +115,7 @@ status = "disabled"; }; - uart1: serial@11007000 { + uart1: serial@11003000 { compatible = "mediatek,mt8127-uart","mediatek,mt6577-uart"; reg = <0 0x11003000 0 0x400>; interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_LOW>; @@ -123,7 +123,7 @@ status = "disabled"; }; - uart2: serial@11008000 { + uart2: serial@11004000 { compatible = "mediatek,mt8127-uart","mediatek,mt6577-uart"; reg = <0 0x11004000 0 0x400>; interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_LOW>; @@ -131,7 +131,7 @@ status = "disabled"; }; - uart3: serial@11009000 { + uart3: serial@11005000 { compatible = "mediatek,mt8127-uart","mediatek,mt6577-uart"; reg = <0 0x11005000 0 0x400>; interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_LOW>; diff --git a/arch/arm/boot/dts/mt8135-pinfunc.h b/arch/arm/boot/dts/mt8135-pinfunc.h new file mode 100644 index 000000000..5a609875c --- /dev/null +++ b/arch/arm/boot/dts/mt8135-pinfunc.h @@ -0,0 +1,1302 @@ +/* + * Copyright (c) 2014 MediaTek Inc. + * Author: Hongzhou.Yang <hongzhou.yang@mediatek.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef __DTS_MT8135_PINFUNC_H +#define __DTS_MT8135_PINFUNC_H + +#include <dt-bindings/pinctrl/mt65xx.h> + +#define MT8135_PIN_0_MSDC0_DAT7__FUNC_GPIO0 (MTK_PIN_NO(0) | 0) +#define MT8135_PIN_0_MSDC0_DAT7__FUNC_MSDC0_DAT7 (MTK_PIN_NO(0) | 1) +#define MT8135_PIN_0_MSDC0_DAT7__FUNC_EINT49 (MTK_PIN_NO(0) | 2) +#define MT8135_PIN_0_MSDC0_DAT7__FUNC_I2SOUT_DAT (MTK_PIN_NO(0) | 3) +#define MT8135_PIN_0_MSDC0_DAT7__FUNC_DAC_DAT_OUT (MTK_PIN_NO(0) | 4) +#define MT8135_PIN_0_MSDC0_DAT7__FUNC_PCM1_DO (MTK_PIN_NO(0) | 5) +#define MT8135_PIN_0_MSDC0_DAT7__FUNC_SPI1_MO (MTK_PIN_NO(0) | 6) +#define MT8135_PIN_0_MSDC0_DAT7__FUNC_NALE (MTK_PIN_NO(0) | 7) + +#define MT8135_PIN_1_MSDC0_DAT6__FUNC_GPIO1 (MTK_PIN_NO(1) | 0) +#define MT8135_PIN_1_MSDC0_DAT6__FUNC_MSDC0_DAT6 (MTK_PIN_NO(1) | 1) +#define MT8135_PIN_1_MSDC0_DAT6__FUNC_EINT48 (MTK_PIN_NO(1) | 2) +#define MT8135_PIN_1_MSDC0_DAT6__FUNC_I2SIN_WS (MTK_PIN_NO(1) | 3) +#define MT8135_PIN_1_MSDC0_DAT6__FUNC_DAC_WS (MTK_PIN_NO(1) | 4) +#define MT8135_PIN_1_MSDC0_DAT6__FUNC_PCM1_WS (MTK_PIN_NO(1) | 5) +#define MT8135_PIN_1_MSDC0_DAT6__FUNC_SPI1_CSN (MTK_PIN_NO(1) | 6) +#define MT8135_PIN_1_MSDC0_DAT6__FUNC_NCLE (MTK_PIN_NO(1) | 7) + +#define MT8135_PIN_2_MSDC0_DAT5__FUNC_GPIO2 (MTK_PIN_NO(2) | 0) +#define MT8135_PIN_2_MSDC0_DAT5__FUNC_MSDC0_DAT5 (MTK_PIN_NO(2) | 1) +#define MT8135_PIN_2_MSDC0_DAT5__FUNC_EINT47 (MTK_PIN_NO(2) | 2) +#define MT8135_PIN_2_MSDC0_DAT5__FUNC_I2SIN_CK (MTK_PIN_NO(2) | 3) +#define MT8135_PIN_2_MSDC0_DAT5__FUNC_DAC_CK (MTK_PIN_NO(2) | 4) +#define MT8135_PIN_2_MSDC0_DAT5__FUNC_PCM1_CK (MTK_PIN_NO(2) | 5) +#define MT8135_PIN_2_MSDC0_DAT5__FUNC_SPI1_CLK (MTK_PIN_NO(2) | 6) +#define MT8135_PIN_2_MSDC0_DAT5__FUNC_NLD4 (MTK_PIN_NO(2) | 7) + +#define MT8135_PIN_3_MSDC0_DAT4__FUNC_GPIO3 (MTK_PIN_NO(3) | 0) +#define MT8135_PIN_3_MSDC0_DAT4__FUNC_MSDC0_DAT4 (MTK_PIN_NO(3) | 1) +#define MT8135_PIN_3_MSDC0_DAT4__FUNC_EINT46 (MTK_PIN_NO(3) | 2) +#define MT8135_PIN_3_MSDC0_DAT4__FUNC_A_FUNC_CK (MTK_PIN_NO(3) | 3) +#define MT8135_PIN_3_MSDC0_DAT4__FUNC_LSCE1B_2X (MTK_PIN_NO(3) | 6) +#define MT8135_PIN_3_MSDC0_DAT4__FUNC_NLD5 (MTK_PIN_NO(3) | 7) + +#define MT8135_PIN_4_MSDC0_CMD__FUNC_GPIO4 (MTK_PIN_NO(4) | 0) +#define MT8135_PIN_4_MSDC0_CMD__FUNC_MSDC0_CMD (MTK_PIN_NO(4) | 1) +#define MT8135_PIN_4_MSDC0_CMD__FUNC_EINT41 (MTK_PIN_NO(4) | 2) +#define MT8135_PIN_4_MSDC0_CMD__FUNC_A_FUNC_DOUT_0 (MTK_PIN_NO(4) | 3) +#define MT8135_PIN_4_MSDC0_CMD__FUNC_USB_TEST_IO_0 (MTK_PIN_NO(4) | 5) +#define MT8135_PIN_4_MSDC0_CMD__FUNC_LRSTB_2X (MTK_PIN_NO(4) | 6) +#define MT8135_PIN_4_MSDC0_CMD__FUNC_NRNB (MTK_PIN_NO(4) | 7) + +#define MT8135_PIN_5_MSDC0_CLK__FUNC_GPIO5 (MTK_PIN_NO(5) | 0) +#define MT8135_PIN_5_MSDC0_CLK__FUNC_MSDC0_CLK (MTK_PIN_NO(5) | 1) +#define MT8135_PIN_5_MSDC0_CLK__FUNC_EINT40 (MTK_PIN_NO(5) | 2) +#define MT8135_PIN_5_MSDC0_CLK__FUNC_A_FUNC_DOUT_1 (MTK_PIN_NO(5) | 3) +#define MT8135_PIN_5_MSDC0_CLK__FUNC_USB_TEST_IO_1 (MTK_PIN_NO(5) | 5) +#define MT8135_PIN_5_MSDC0_CLK__FUNC_LPTE (MTK_PIN_NO(5) | 6) +#define MT8135_PIN_5_MSDC0_CLK__FUNC_NREB (MTK_PIN_NO(5) | 7) + +#define MT8135_PIN_6_MSDC0_DAT3__FUNC_GPIO6 (MTK_PIN_NO(6) | 0) +#define MT8135_PIN_6_MSDC0_DAT3__FUNC_MSDC0_DAT3 (MTK_PIN_NO(6) | 1) +#define MT8135_PIN_6_MSDC0_DAT3__FUNC_EINT45 (MTK_PIN_NO(6) | 2) +#define MT8135_PIN_6_MSDC0_DAT3__FUNC_A_FUNC_DOUT_2 (MTK_PIN_NO(6) | 3) +#define MT8135_PIN_6_MSDC0_DAT3__FUNC_USB_TEST_IO_2 (MTK_PIN_NO(6) | 5) +#define MT8135_PIN_6_MSDC0_DAT3__FUNC_LSCE0B_2X (MTK_PIN_NO(6) | 6) +#define MT8135_PIN_6_MSDC0_DAT3__FUNC_NLD7 (MTK_PIN_NO(6) | 7) + +#define MT8135_PIN_7_MSDC0_DAT2__FUNC_GPIO7 (MTK_PIN_NO(7) | 0) +#define MT8135_PIN_7_MSDC0_DAT2__FUNC_MSDC0_DAT2 (MTK_PIN_NO(7) | 1) +#define MT8135_PIN_7_MSDC0_DAT2__FUNC_EINT44 (MTK_PIN_NO(7) | 2) +#define MT8135_PIN_7_MSDC0_DAT2__FUNC_A_FUNC_DOUT_3 (MTK_PIN_NO(7) | 3) +#define MT8135_PIN_7_MSDC0_DAT2__FUNC_USB_TEST_IO_3 (MTK_PIN_NO(7) | 5) +#define MT8135_PIN_7_MSDC0_DAT2__FUNC_LSA0_2X (MTK_PIN_NO(7) | 6) +#define MT8135_PIN_7_MSDC0_DAT2__FUNC_NLD14 (MTK_PIN_NO(7) | 7) + +#define MT8135_PIN_8_MSDC0_DAT1__FUNC_GPIO8 (MTK_PIN_NO(8) | 0) +#define MT8135_PIN_8_MSDC0_DAT1__FUNC_MSDC0_DAT1 (MTK_PIN_NO(8) | 1) +#define MT8135_PIN_8_MSDC0_DAT1__FUNC_EINT43 (MTK_PIN_NO(8) | 2) +#define MT8135_PIN_8_MSDC0_DAT1__FUNC_USB_TEST_IO_4 (MTK_PIN_NO(8) | 5) +#define MT8135_PIN_8_MSDC0_DAT1__FUNC_LSCK_2X (MTK_PIN_NO(8) | 6) +#define MT8135_PIN_8_MSDC0_DAT1__FUNC_NLD11 (MTK_PIN_NO(8) | 7) + +#define MT8135_PIN_9_MSDC0_DAT0__FUNC_GPIO9 (MTK_PIN_NO(9) | 0) +#define MT8135_PIN_9_MSDC0_DAT0__FUNC_MSDC0_DAT0 (MTK_PIN_NO(9) | 1) +#define MT8135_PIN_9_MSDC0_DAT0__FUNC_EINT42 (MTK_PIN_NO(9) | 2) +#define MT8135_PIN_9_MSDC0_DAT0__FUNC_USB_TEST_IO_5 (MTK_PIN_NO(9) | 5) +#define MT8135_PIN_9_MSDC0_DAT0__FUNC_LSDA_2X (MTK_PIN_NO(9) | 6) + +#define MT8135_PIN_10_NCEB0__FUNC_GPIO10 (MTK_PIN_NO(10) | 0) +#define MT8135_PIN_10_NCEB0__FUNC_NCEB0 (MTK_PIN_NO(10) | 1) +#define MT8135_PIN_10_NCEB0__FUNC_EINT139 (MTK_PIN_NO(10) | 2) +#define MT8135_PIN_10_NCEB0__FUNC_TESTA_OUT4 (MTK_PIN_NO(10) | 7) + +#define MT8135_PIN_11_NCEB1__FUNC_GPIO11 (MTK_PIN_NO(11) | 0) +#define MT8135_PIN_11_NCEB1__FUNC_NCEB1 (MTK_PIN_NO(11) | 1) +#define MT8135_PIN_11_NCEB1__FUNC_EINT140 (MTK_PIN_NO(11) | 2) +#define MT8135_PIN_11_NCEB1__FUNC_USB_DRVVBUS (MTK_PIN_NO(11) | 6) +#define MT8135_PIN_11_NCEB1__FUNC_TESTA_OUT5 (MTK_PIN_NO(11) | 7) + +#define MT8135_PIN_12_NRNB__FUNC_GPIO12 (MTK_PIN_NO(12) | 0) +#define MT8135_PIN_12_NRNB__FUNC_NRNB (MTK_PIN_NO(12) | 1) +#define MT8135_PIN_12_NRNB__FUNC_EINT141 (MTK_PIN_NO(12) | 2) +#define MT8135_PIN_12_NRNB__FUNC_A_FUNC_DOUT_4 (MTK_PIN_NO(12) | 3) +#define MT8135_PIN_12_NRNB__FUNC_TESTA_OUT6 (MTK_PIN_NO(12) | 7) + +#define MT8135_PIN_13_NCLE__FUNC_GPIO13 (MTK_PIN_NO(13) | 0) +#define MT8135_PIN_13_NCLE__FUNC_NCLE (MTK_PIN_NO(13) | 1) +#define MT8135_PIN_13_NCLE__FUNC_EINT142 (MTK_PIN_NO(13) | 2) +#define MT8135_PIN_13_NCLE__FUNC_A_FUNC_DOUT_5 (MTK_PIN_NO(13) | 3) +#define MT8135_PIN_13_NCLE__FUNC_CM2PDN_1X (MTK_PIN_NO(13) | 4) +#define MT8135_PIN_13_NCLE__FUNC_NALE (MTK_PIN_NO(13) | 6) +#define MT8135_PIN_13_NCLE__FUNC_TESTA_OUT7 (MTK_PIN_NO(13) | 7) + +#define MT8135_PIN_14_NALE__FUNC_GPIO14 (MTK_PIN_NO(14) | 0) +#define MT8135_PIN_14_NALE__FUNC_NALE (MTK_PIN_NO(14) | 1) +#define MT8135_PIN_14_NALE__FUNC_EINT143 (MTK_PIN_NO(14) | 2) +#define MT8135_PIN_14_NALE__FUNC_A_FUNC_DOUT_6 (MTK_PIN_NO(14) | 3) +#define MT8135_PIN_14_NALE__FUNC_CM2MCLK_1X (MTK_PIN_NO(14) | 4) +#define MT8135_PIN_14_NALE__FUNC_IRDA_RXD (MTK_PIN_NO(14) | 5) +#define MT8135_PIN_14_NALE__FUNC_NCLE (MTK_PIN_NO(14) | 6) +#define MT8135_PIN_14_NALE__FUNC_TESTA_OUT8 (MTK_PIN_NO(14) | 7) + +#define MT8135_PIN_15_NREB__FUNC_GPIO15 (MTK_PIN_NO(15) | 0) +#define MT8135_PIN_15_NREB__FUNC_NREB (MTK_PIN_NO(15) | 1) +#define MT8135_PIN_15_NREB__FUNC_EINT144 (MTK_PIN_NO(15) | 2) +#define MT8135_PIN_15_NREB__FUNC_A_FUNC_DOUT_7 (MTK_PIN_NO(15) | 3) +#define MT8135_PIN_15_NREB__FUNC_CM2RST_1X (MTK_PIN_NO(15) | 4) +#define MT8135_PIN_15_NREB__FUNC_IRDA_TXD (MTK_PIN_NO(15) | 5) +#define MT8135_PIN_15_NREB__FUNC_TESTA_OUT9 (MTK_PIN_NO(15) | 7) + +#define MT8135_PIN_16_NWEB__FUNC_GPIO16 (MTK_PIN_NO(16) | 0) +#define MT8135_PIN_16_NWEB__FUNC_NWEB (MTK_PIN_NO(16) | 1) +#define MT8135_PIN_16_NWEB__FUNC_EINT145 (MTK_PIN_NO(16) | 2) +#define MT8135_PIN_16_NWEB__FUNC_A_FUNC_DIN_0 (MTK_PIN_NO(16) | 3) +#define MT8135_PIN_16_NWEB__FUNC_CM2PCLK_1X (MTK_PIN_NO(16) | 4) +#define MT8135_PIN_16_NWEB__FUNC_IRDA_PDN (MTK_PIN_NO(16) | 5) +#define MT8135_PIN_16_NWEB__FUNC_TESTA_OUT10 (MTK_PIN_NO(16) | 7) + +#define MT8135_PIN_17_NLD0__FUNC_GPIO17 (MTK_PIN_NO(17) | 0) +#define MT8135_PIN_17_NLD0__FUNC_NLD0 (MTK_PIN_NO(17) | 1) +#define MT8135_PIN_17_NLD0__FUNC_EINT146 (MTK_PIN_NO(17) | 2) +#define MT8135_PIN_17_NLD0__FUNC_A_FUNC_DIN_1 (MTK_PIN_NO(17) | 3) +#define MT8135_PIN_17_NLD0__FUNC_CM2DAT_1X_0 (MTK_PIN_NO(17) | 4) +#define MT8135_PIN_17_NLD0__FUNC_I2SIN_CK (MTK_PIN_NO(17) | 5) +#define MT8135_PIN_17_NLD0__FUNC_DAC_CK (MTK_PIN_NO(17) | 6) +#define MT8135_PIN_17_NLD0__FUNC_TESTA_OUT11 (MTK_PIN_NO(17) | 7) + +#define MT8135_PIN_18_NLD1__FUNC_GPIO18 (MTK_PIN_NO(18) | 0) +#define MT8135_PIN_18_NLD1__FUNC_NLD1 (MTK_PIN_NO(18) | 1) +#define MT8135_PIN_18_NLD1__FUNC_EINT147 (MTK_PIN_NO(18) | 2) +#define MT8135_PIN_18_NLD1__FUNC_A_FUNC_DIN_2 (MTK_PIN_NO(18) | 3) +#define MT8135_PIN_18_NLD1__FUNC_CM2DAT_1X_1 (MTK_PIN_NO(18) | 4) +#define MT8135_PIN_18_NLD1__FUNC_I2SIN_WS (MTK_PIN_NO(18) | 5) +#define MT8135_PIN_18_NLD1__FUNC_DAC_WS (MTK_PIN_NO(18) | 6) +#define MT8135_PIN_18_NLD1__FUNC_TESTA_OUT12 (MTK_PIN_NO(18) | 7) + +#define MT8135_PIN_19_NLD2__FUNC_GPIO19 (MTK_PIN_NO(19) | 0) +#define MT8135_PIN_19_NLD2__FUNC_NLD2 (MTK_PIN_NO(19) | 1) +#define MT8135_PIN_19_NLD2__FUNC_EINT148 (MTK_PIN_NO(19) | 2) +#define MT8135_PIN_19_NLD2__FUNC_A_FUNC_DIN_3 (MTK_PIN_NO(19) | 3) +#define MT8135_PIN_19_NLD2__FUNC_CM2DAT_1X_2 (MTK_PIN_NO(19) | 4) +#define MT8135_PIN_19_NLD2__FUNC_I2SOUT_DAT (MTK_PIN_NO(19) | 5) +#define MT8135_PIN_19_NLD2__FUNC_DAC_DAT_OUT (MTK_PIN_NO(19) | 6) +#define MT8135_PIN_19_NLD2__FUNC_TESTA_OUT13 (MTK_PIN_NO(19) | 7) + +#define MT8135_PIN_20_NLD3__FUNC_GPIO20 (MTK_PIN_NO(20) | 0) +#define MT8135_PIN_20_NLD3__FUNC_NLD3 (MTK_PIN_NO(20) | 1) +#define MT8135_PIN_20_NLD3__FUNC_EINT149 (MTK_PIN_NO(20) | 2) +#define MT8135_PIN_20_NLD3__FUNC_A_FUNC_DIN_4 (MTK_PIN_NO(20) | 3) +#define MT8135_PIN_20_NLD3__FUNC_CM2DAT_1X_3 (MTK_PIN_NO(20) | 4) +#define MT8135_PIN_20_NLD3__FUNC_TESTA_OUT14 (MTK_PIN_NO(20) | 7) + +#define MT8135_PIN_21_NLD4__FUNC_GPIO21 (MTK_PIN_NO(21) | 0) +#define MT8135_PIN_21_NLD4__FUNC_NLD4 (MTK_PIN_NO(21) | 1) +#define MT8135_PIN_21_NLD4__FUNC_EINT150 (MTK_PIN_NO(21) | 2) +#define MT8135_PIN_21_NLD4__FUNC_A_FUNC_DIN_5 (MTK_PIN_NO(21) | 3) +#define MT8135_PIN_21_NLD4__FUNC_CM2DAT_1X_4 (MTK_PIN_NO(21) | 4) +#define MT8135_PIN_21_NLD4__FUNC_TESTA_OUT15 (MTK_PIN_NO(21) | 7) + +#define MT8135_PIN_22_NLD5__FUNC_GPIO22 (MTK_PIN_NO(22) | 0) +#define MT8135_PIN_22_NLD5__FUNC_NLD5 (MTK_PIN_NO(22) | 1) +#define MT8135_PIN_22_NLD5__FUNC_EINT151 (MTK_PIN_NO(22) | 2) +#define MT8135_PIN_22_NLD5__FUNC_A_FUNC_DIN_6 (MTK_PIN_NO(22) | 3) +#define MT8135_PIN_22_NLD5__FUNC_CM2DAT_1X_5 (MTK_PIN_NO(22) | 4) +#define MT8135_PIN_22_NLD5__FUNC_TESTA_OUT16 (MTK_PIN_NO(22) | 7) + +#define MT8135_PIN_23_NLD6__FUNC_GPIO23 (MTK_PIN_NO(23) | 0) +#define MT8135_PIN_23_NLD6__FUNC_NLD6 (MTK_PIN_NO(23) | 1) +#define MT8135_PIN_23_NLD6__FUNC_EINT152 (MTK_PIN_NO(23) | 2) +#define MT8135_PIN_23_NLD6__FUNC_A_FUNC_DIN_7 (MTK_PIN_NO(23) | 3) +#define MT8135_PIN_23_NLD6__FUNC_CM2DAT_1X_6 (MTK_PIN_NO(23) | 4) +#define MT8135_PIN_23_NLD6__FUNC_TESTA_OUT17 (MTK_PIN_NO(23) | 7) + +#define MT8135_PIN_24_NLD7__FUNC_GPIO24 (MTK_PIN_NO(24) | 0) +#define MT8135_PIN_24_NLD7__FUNC_NLD7 (MTK_PIN_NO(24) | 1) +#define MT8135_PIN_24_NLD7__FUNC_EINT153 (MTK_PIN_NO(24) | 2) +#define MT8135_PIN_24_NLD7__FUNC_A_FUNC_DIN_8 (MTK_PIN_NO(24) | 3) +#define MT8135_PIN_24_NLD7__FUNC_CM2DAT_1X_7 (MTK_PIN_NO(24) | 4) +#define MT8135_PIN_24_NLD7__FUNC_TESTA_OUT18 (MTK_PIN_NO(24) | 7) + +#define MT8135_PIN_25_NLD8__FUNC_GPIO25 (MTK_PIN_NO(25) | 0) +#define MT8135_PIN_25_NLD8__FUNC_NLD8 (MTK_PIN_NO(25) | 1) +#define MT8135_PIN_25_NLD8__FUNC_EINT154 (MTK_PIN_NO(25) | 2) +#define MT8135_PIN_25_NLD8__FUNC_CM2DAT_1X_8 (MTK_PIN_NO(25) | 4) + +#define MT8135_PIN_26_NLD9__FUNC_GPIO26 (MTK_PIN_NO(26) | 0) +#define MT8135_PIN_26_NLD9__FUNC_NLD9 (MTK_PIN_NO(26) | 1) +#define MT8135_PIN_26_NLD9__FUNC_EINT155 (MTK_PIN_NO(26) | 2) +#define MT8135_PIN_26_NLD9__FUNC_CM2DAT_1X_9 (MTK_PIN_NO(26) | 4) +#define MT8135_PIN_26_NLD9__FUNC_PWM1 (MTK_PIN_NO(26) | 5) + +#define MT8135_PIN_27_NLD10__FUNC_GPIO27 (MTK_PIN_NO(27) | 0) +#define MT8135_PIN_27_NLD10__FUNC_NLD10 (MTK_PIN_NO(27) | 1) +#define MT8135_PIN_27_NLD10__FUNC_EINT156 (MTK_PIN_NO(27) | 2) +#define MT8135_PIN_27_NLD10__FUNC_CM2VSYNC_1X (MTK_PIN_NO(27) | 4) +#define MT8135_PIN_27_NLD10__FUNC_PWM2 (MTK_PIN_NO(27) | 5) + +#define MT8135_PIN_28_NLD11__FUNC_GPIO28 (MTK_PIN_NO(28) | 0) +#define MT8135_PIN_28_NLD11__FUNC_NLD11 (MTK_PIN_NO(28) | 1) +#define MT8135_PIN_28_NLD11__FUNC_EINT157 (MTK_PIN_NO(28) | 2) +#define MT8135_PIN_28_NLD11__FUNC_CM2HSYNC_1X (MTK_PIN_NO(28) | 4) +#define MT8135_PIN_28_NLD11__FUNC_PWM3 (MTK_PIN_NO(28) | 5) + +#define MT8135_PIN_29_NLD12__FUNC_GPIO29 (MTK_PIN_NO(29) | 0) +#define MT8135_PIN_29_NLD12__FUNC_NLD12 (MTK_PIN_NO(29) | 1) +#define MT8135_PIN_29_NLD12__FUNC_EINT158 (MTK_PIN_NO(29) | 2) +#define MT8135_PIN_29_NLD12__FUNC_I2SIN_CK (MTK_PIN_NO(29) | 3) +#define MT8135_PIN_29_NLD12__FUNC_DAC_CK (MTK_PIN_NO(29) | 4) +#define MT8135_PIN_29_NLD12__FUNC_PCM1_CK (MTK_PIN_NO(29) | 5) + +#define MT8135_PIN_30_NLD13__FUNC_GPIO30 (MTK_PIN_NO(30) | 0) +#define MT8135_PIN_30_NLD13__FUNC_NLD13 (MTK_PIN_NO(30) | 1) +#define MT8135_PIN_30_NLD13__FUNC_EINT159 (MTK_PIN_NO(30) | 2) +#define MT8135_PIN_30_NLD13__FUNC_I2SIN_WS (MTK_PIN_NO(30) | 3) +#define MT8135_PIN_30_NLD13__FUNC_DAC_WS (MTK_PIN_NO(30) | 4) +#define MT8135_PIN_30_NLD13__FUNC_PCM1_WS (MTK_PIN_NO(30) | 5) + +#define MT8135_PIN_31_NLD14__FUNC_GPIO31 (MTK_PIN_NO(31) | 0) +#define MT8135_PIN_31_NLD14__FUNC_NLD14 (MTK_PIN_NO(31) | 1) +#define MT8135_PIN_31_NLD14__FUNC_EINT160 (MTK_PIN_NO(31) | 2) +#define MT8135_PIN_31_NLD14__FUNC_I2SOUT_DAT (MTK_PIN_NO(31) | 3) +#define MT8135_PIN_31_NLD14__FUNC_DAC_DAT_OUT (MTK_PIN_NO(31) | 4) +#define MT8135_PIN_31_NLD14__FUNC_PCM1_DO (MTK_PIN_NO(31) | 5) + +#define MT8135_PIN_32_NLD15__FUNC_GPIO32 (MTK_PIN_NO(32) | 0) +#define MT8135_PIN_32_NLD15__FUNC_NLD15 (MTK_PIN_NO(32) | 1) +#define MT8135_PIN_32_NLD15__FUNC_EINT161 (MTK_PIN_NO(32) | 2) +#define MT8135_PIN_32_NLD15__FUNC_DISP_PWM (MTK_PIN_NO(32) | 3) +#define MT8135_PIN_32_NLD15__FUNC_PWM4 (MTK_PIN_NO(32) | 4) +#define MT8135_PIN_32_NLD15__FUNC_PCM1_DI (MTK_PIN_NO(32) | 5) + +#define MT8135_PIN_33_MSDC0_RSTB__FUNC_GPIO33 (MTK_PIN_NO(33) | 0) +#define MT8135_PIN_33_MSDC0_RSTB__FUNC_MSDC0_RSTB (MTK_PIN_NO(33) | 1) +#define MT8135_PIN_33_MSDC0_RSTB__FUNC_EINT50 (MTK_PIN_NO(33) | 2) +#define MT8135_PIN_33_MSDC0_RSTB__FUNC_I2SIN_DAT (MTK_PIN_NO(33) | 3) +#define MT8135_PIN_33_MSDC0_RSTB__FUNC_PCM1_DI (MTK_PIN_NO(33) | 5) +#define MT8135_PIN_33_MSDC0_RSTB__FUNC_SPI1_MI (MTK_PIN_NO(33) | 6) +#define MT8135_PIN_33_MSDC0_RSTB__FUNC_NLD10 (MTK_PIN_NO(33) | 7) + +#define MT8135_PIN_34_IDDIG__FUNC_GPIO34 (MTK_PIN_NO(34) | 0) +#define MT8135_PIN_34_IDDIG__FUNC_IDDIG (MTK_PIN_NO(34) | 1) +#define MT8135_PIN_34_IDDIG__FUNC_EINT34 (MTK_PIN_NO(34) | 2) + +#define MT8135_PIN_35_SCL3__FUNC_GPIO35 (MTK_PIN_NO(35) | 0) +#define MT8135_PIN_35_SCL3__FUNC_SCL3 (MTK_PIN_NO(35) | 1) +#define MT8135_PIN_35_SCL3__FUNC_EINT96 (MTK_PIN_NO(35) | 2) +#define MT8135_PIN_35_SCL3__FUNC_CLKM6 (MTK_PIN_NO(35) | 3) +#define MT8135_PIN_35_SCL3__FUNC_PWM6 (MTK_PIN_NO(35) | 4) + +#define MT8135_PIN_36_SDA3__FUNC_GPIO36 (MTK_PIN_NO(36) | 0) +#define MT8135_PIN_36_SDA3__FUNC_SDA3 (MTK_PIN_NO(36) | 1) +#define MT8135_PIN_36_SDA3__FUNC_EINT97 (MTK_PIN_NO(36) | 2) + +#define MT8135_PIN_37_AUD_CLK_MOSI__FUNC_GPIO37 (MTK_PIN_NO(37) | 0) +#define MT8135_PIN_37_AUD_CLK_MOSI__FUNC_AUD_CLK (MTK_PIN_NO(37) | 1) +#define MT8135_PIN_37_AUD_CLK_MOSI__FUNC_ADC_CK (MTK_PIN_NO(37) | 2) +#define MT8135_PIN_37_AUD_CLK_MOSI__FUNC_HDMI_SDATA0 (MTK_PIN_NO(37) | 3) +#define MT8135_PIN_37_AUD_CLK_MOSI__FUNC_EINT19 (MTK_PIN_NO(37) | 4) +#define MT8135_PIN_37_AUD_CLK_MOSI__FUNC_USB_TEST_IO_6 (MTK_PIN_NO(37) | 5) +#define MT8135_PIN_37_AUD_CLK_MOSI__FUNC_TESTA_OUT19 (MTK_PIN_NO(37) | 7) + +#define MT8135_PIN_38_AUD_DAT_MOSI__FUNC_GPIO38 (MTK_PIN_NO(38) | 0) +#define MT8135_PIN_38_AUD_DAT_MOSI__FUNC_AUD_DAT_MOSI (MTK_PIN_NO(38) | 1) +#define MT8135_PIN_38_AUD_DAT_MOSI__FUNC_ADC_WS (MTK_PIN_NO(38) | 2) +#define MT8135_PIN_38_AUD_DAT_MOSI__FUNC_AUD_DAT_MISO (MTK_PIN_NO(38) | 3) +#define MT8135_PIN_38_AUD_DAT_MOSI__FUNC_EINT21 (MTK_PIN_NO(38) | 4) +#define MT8135_PIN_38_AUD_DAT_MOSI__FUNC_USB_TEST_IO_7 (MTK_PIN_NO(38) | 5) +#define MT8135_PIN_38_AUD_DAT_MOSI__FUNC_TESTA_OUT20 (MTK_PIN_NO(38) | 7) + +#define MT8135_PIN_39_AUD_DAT_MISO__FUNC_GPIO39 (MTK_PIN_NO(39) | 0) +#define MT8135_PIN_39_AUD_DAT_MISO__FUNC_AUD_DAT_MISO (MTK_PIN_NO(39) | 1) +#define MT8135_PIN_39_AUD_DAT_MISO__FUNC_ADC_DAT_IN (MTK_PIN_NO(39) | 2) +#define MT8135_PIN_39_AUD_DAT_MISO__FUNC_AUD_DAT_MOSI (MTK_PIN_NO(39) | 3) +#define MT8135_PIN_39_AUD_DAT_MISO__FUNC_EINT20 (MTK_PIN_NO(39) | 4) +#define MT8135_PIN_39_AUD_DAT_MISO__FUNC_USB_TEST_IO_8 (MTK_PIN_NO(39) | 5) +#define MT8135_PIN_39_AUD_DAT_MISO__FUNC_TESTA_OUT21 (MTK_PIN_NO(39) | 7) + +#define MT8135_PIN_40_DAC_CLK__FUNC_GPIO40 (MTK_PIN_NO(40) | 0) +#define MT8135_PIN_40_DAC_CLK__FUNC_DAC_CK (MTK_PIN_NO(40) | 1) +#define MT8135_PIN_40_DAC_CLK__FUNC_EINT22 (MTK_PIN_NO(40) | 2) +#define MT8135_PIN_40_DAC_CLK__FUNC_HDMI_SDATA1 (MTK_PIN_NO(40) | 3) +#define MT8135_PIN_40_DAC_CLK__FUNC_USB_TEST_IO_9 (MTK_PIN_NO(40) | 5) +#define MT8135_PIN_40_DAC_CLK__FUNC_TESTA_OUT22 (MTK_PIN_NO(40) | 7) + +#define MT8135_PIN_41_DAC_WS__FUNC_GPIO41 (MTK_PIN_NO(41) | 0) +#define MT8135_PIN_41_DAC_WS__FUNC_DAC_WS (MTK_PIN_NO(41) | 1) +#define MT8135_PIN_41_DAC_WS__FUNC_EINT24 (MTK_PIN_NO(41) | 2) +#define MT8135_PIN_41_DAC_WS__FUNC_HDMI_SDATA2 (MTK_PIN_NO(41) | 3) +#define MT8135_PIN_41_DAC_WS__FUNC_USB_TEST_IO_10 (MTK_PIN_NO(41) | 5) +#define MT8135_PIN_41_DAC_WS__FUNC_TESTA_OUT23 (MTK_PIN_NO(41) | 7) + +#define MT8135_PIN_42_DAC_DAT_OUT__FUNC_GPIO42 (MTK_PIN_NO(42) | 0) +#define MT8135_PIN_42_DAC_DAT_OUT__FUNC_DAC_DAT_OUT (MTK_PIN_NO(42) | 1) +#define MT8135_PIN_42_DAC_DAT_OUT__FUNC_EINT23 (MTK_PIN_NO(42) | 2) +#define MT8135_PIN_42_DAC_DAT_OUT__FUNC_HDMI_SDATA3 (MTK_PIN_NO(42) | 3) +#define MT8135_PIN_42_DAC_DAT_OUT__FUNC_USB_TEST_IO_11 (MTK_PIN_NO(42) | 5) +#define MT8135_PIN_42_DAC_DAT_OUT__FUNC_TESTA_OUT24 (MTK_PIN_NO(42) | 7) + +#define MT8135_PIN_43_PWRAP_SPI0_MO__FUNC_GPIO43 (MTK_PIN_NO(43) | 0) +#define MT8135_PIN_43_PWRAP_SPI0_MO__FUNC_PWRAP_SPIDI (MTK_PIN_NO(43) | 1) +#define MT8135_PIN_43_PWRAP_SPI0_MO__FUNC_EINT29 (MTK_PIN_NO(43) | 2) + +#define MT8135_PIN_44_PWRAP_SPI0_MI__FUNC_GPIO44 (MTK_PIN_NO(44) | 0) +#define MT8135_PIN_44_PWRAP_SPI0_MI__FUNC_PWRAP_SPIDO (MTK_PIN_NO(44) | 1) +#define MT8135_PIN_44_PWRAP_SPI0_MI__FUNC_EINT28 (MTK_PIN_NO(44) | 2) + +#define MT8135_PIN_45_PWRAP_SPI0_CSN__FUNC_GPIO45 (MTK_PIN_NO(45) | 0) +#define MT8135_PIN_45_PWRAP_SPI0_CSN__FUNC_PWRAP_SPICS_B_I (MTK_PIN_NO(45) | 1) +#define MT8135_PIN_45_PWRAP_SPI0_CSN__FUNC_EINT27 (MTK_PIN_NO(45) | 2) + +#define MT8135_PIN_46_PWRAP_SPI0_CLK__FUNC_GPIO46 (MTK_PIN_NO(46) | 0) +#define MT8135_PIN_46_PWRAP_SPI0_CLK__FUNC_PWRAP_SPICK_I (MTK_PIN_NO(46) | 1) +#define MT8135_PIN_46_PWRAP_SPI0_CLK__FUNC_EINT26 (MTK_PIN_NO(46) | 2) + +#define MT8135_PIN_47_PWRAP_EVENT__FUNC_GPIO47 (MTK_PIN_NO(47) | 0) +#define MT8135_PIN_47_PWRAP_EVENT__FUNC_PWRAP_EVENT_IN (MTK_PIN_NO(47) | 1) +#define MT8135_PIN_47_PWRAP_EVENT__FUNC_EINT25 (MTK_PIN_NO(47) | 2) +#define MT8135_PIN_47_PWRAP_EVENT__FUNC_TESTA_OUT2 (MTK_PIN_NO(47) | 7) + +#define MT8135_PIN_48_RTC32K_CK__FUNC_GPIO48 (MTK_PIN_NO(48) | 0) +#define MT8135_PIN_48_RTC32K_CK__FUNC_RTC32K_CK (MTK_PIN_NO(48) | 1) + +#define MT8135_PIN_49_WATCHDOG__FUNC_GPIO49 (MTK_PIN_NO(49) | 0) +#define MT8135_PIN_49_WATCHDOG__FUNC_WATCHDOG (MTK_PIN_NO(49) | 1) +#define MT8135_PIN_49_WATCHDOG__FUNC_EINT36 (MTK_PIN_NO(49) | 2) + +#define MT8135_PIN_50_SRCLKENA__FUNC_GPIO50 (MTK_PIN_NO(50) | 0) +#define MT8135_PIN_50_SRCLKENA__FUNC_SRCLKENA (MTK_PIN_NO(50) | 1) +#define MT8135_PIN_50_SRCLKENA__FUNC_EINT38 (MTK_PIN_NO(50) | 2) + +#define MT8135_PIN_51_SRCVOLTEN__FUNC_GPIO51 (MTK_PIN_NO(51) | 0) +#define MT8135_PIN_51_SRCVOLTEN__FUNC_SRCVOLTEN (MTK_PIN_NO(51) | 1) +#define MT8135_PIN_51_SRCVOLTEN__FUNC_EINT37 (MTK_PIN_NO(51) | 2) + +#define MT8135_PIN_52_EINT0__FUNC_GPIO52 (MTK_PIN_NO(52) | 0) +#define MT8135_PIN_52_EINT0__FUNC_EINT0 (MTK_PIN_NO(52) | 1) +#define MT8135_PIN_52_EINT0__FUNC_PWM1 (MTK_PIN_NO(52) | 2) +#define MT8135_PIN_52_EINT0__FUNC_CLKM0 (MTK_PIN_NO(52) | 3) +#define MT8135_PIN_52_EINT0__FUNC_SPDIF_OUT (MTK_PIN_NO(52) | 4) +#define MT8135_PIN_52_EINT0__FUNC_USB_TEST_IO_12 (MTK_PIN_NO(52) | 5) +#define MT8135_PIN_52_EINT0__FUNC_USB_SCL (MTK_PIN_NO(52) | 7) + +#define MT8135_PIN_53_URXD2__FUNC_GPIO53 (MTK_PIN_NO(53) | 0) +#define MT8135_PIN_53_URXD2__FUNC_URXD2 (MTK_PIN_NO(53) | 1) +#define MT8135_PIN_53_URXD2__FUNC_EINT83 (MTK_PIN_NO(53) | 2) +#define MT8135_PIN_53_URXD2__FUNC_HDMI_LRCK (MTK_PIN_NO(53) | 4) +#define MT8135_PIN_53_URXD2__FUNC_CLKM3 (MTK_PIN_NO(53) | 5) +#define MT8135_PIN_53_URXD2__FUNC_UTXD2 (MTK_PIN_NO(53) | 7) + +#define MT8135_PIN_54_UTXD2__FUNC_GPIO54 (MTK_PIN_NO(54) | 0) +#define MT8135_PIN_54_UTXD2__FUNC_UTXD2 (MTK_PIN_NO(54) | 1) +#define MT8135_PIN_54_UTXD2__FUNC_EINT82 (MTK_PIN_NO(54) | 2) +#define MT8135_PIN_54_UTXD2__FUNC_HDMI_BCK_OUT (MTK_PIN_NO(54) | 4) +#define MT8135_PIN_54_UTXD2__FUNC_CLKM2 (MTK_PIN_NO(54) | 5) +#define MT8135_PIN_54_UTXD2__FUNC_URXD2 (MTK_PIN_NO(54) | 7) + +#define MT8135_PIN_55_UCTS2__FUNC_GPIO55 (MTK_PIN_NO(55) | 0) +#define MT8135_PIN_55_UCTS2__FUNC_UCTS2 (MTK_PIN_NO(55) | 1) +#define MT8135_PIN_55_UCTS2__FUNC_EINT84 (MTK_PIN_NO(55) | 2) +#define MT8135_PIN_55_UCTS2__FUNC_PWM1 (MTK_PIN_NO(55) | 5) +#define MT8135_PIN_55_UCTS2__FUNC_URTS2 (MTK_PIN_NO(55) | 7) + +#define MT8135_PIN_56_URTS2__FUNC_GPIO56 (MTK_PIN_NO(56) | 0) +#define MT8135_PIN_56_URTS2__FUNC_URTS2 (MTK_PIN_NO(56) | 1) +#define MT8135_PIN_56_URTS2__FUNC_EINT85 (MTK_PIN_NO(56) | 2) +#define MT8135_PIN_56_URTS2__FUNC_PWM2 (MTK_PIN_NO(56) | 5) +#define MT8135_PIN_56_URTS2__FUNC_UCTS2 (MTK_PIN_NO(56) | 7) + +#define MT8135_PIN_57_JTCK__FUNC_GPIO57 (MTK_PIN_NO(57) | 0) +#define MT8135_PIN_57_JTCK__FUNC_JTCK (MTK_PIN_NO(57) | 1) +#define MT8135_PIN_57_JTCK__FUNC_EINT188 (MTK_PIN_NO(57) | 2) +#define MT8135_PIN_57_JTCK__FUNC_DSP1_ICK (MTK_PIN_NO(57) | 3) + +#define MT8135_PIN_58_JTDO__FUNC_GPIO58 (MTK_PIN_NO(58) | 0) +#define MT8135_PIN_58_JTDO__FUNC_JTDO (MTK_PIN_NO(58) | 1) +#define MT8135_PIN_58_JTDO__FUNC_EINT190 (MTK_PIN_NO(58) | 2) +#define MT8135_PIN_58_JTDO__FUNC_DSP2_IMS (MTK_PIN_NO(58) | 3) + +#define MT8135_PIN_59_JTRST_B__FUNC_GPIO59 (MTK_PIN_NO(59) | 0) +#define MT8135_PIN_59_JTRST_B__FUNC_JTRST_B (MTK_PIN_NO(59) | 1) +#define MT8135_PIN_59_JTRST_B__FUNC_EINT0 (MTK_PIN_NO(59) | 2) +#define MT8135_PIN_59_JTRST_B__FUNC_DSP2_ICK (MTK_PIN_NO(59) | 3) + +#define MT8135_PIN_60_JTDI__FUNC_GPIO60 (MTK_PIN_NO(60) | 0) +#define MT8135_PIN_60_JTDI__FUNC_JTDI (MTK_PIN_NO(60) | 1) +#define MT8135_PIN_60_JTDI__FUNC_EINT189 (MTK_PIN_NO(60) | 2) +#define MT8135_PIN_60_JTDI__FUNC_DSP1_IMS (MTK_PIN_NO(60) | 3) + +#define MT8135_PIN_61_JRTCK__FUNC_GPIO61 (MTK_PIN_NO(61) | 0) +#define MT8135_PIN_61_JRTCK__FUNC_JRTCK (MTK_PIN_NO(61) | 1) +#define MT8135_PIN_61_JRTCK__FUNC_EINT187 (MTK_PIN_NO(61) | 2) +#define MT8135_PIN_61_JRTCK__FUNC_DSP1_ID (MTK_PIN_NO(61) | 3) + +#define MT8135_PIN_62_JTMS__FUNC_GPIO62 (MTK_PIN_NO(62) | 0) +#define MT8135_PIN_62_JTMS__FUNC_JTMS (MTK_PIN_NO(62) | 1) +#define MT8135_PIN_62_JTMS__FUNC_EINT191 (MTK_PIN_NO(62) | 2) +#define MT8135_PIN_62_JTMS__FUNC_DSP2_ID (MTK_PIN_NO(62) | 3) + +#define MT8135_PIN_63_MSDC1_INSI__FUNC_GPIO63 (MTK_PIN_NO(63) | 0) +#define MT8135_PIN_63_MSDC1_INSI__FUNC_MSDC1_INSI (MTK_PIN_NO(63) | 1) +#define MT8135_PIN_63_MSDC1_INSI__FUNC_SCL5 (MTK_PIN_NO(63) | 3) +#define MT8135_PIN_63_MSDC1_INSI__FUNC_PWM6 (MTK_PIN_NO(63) | 4) +#define MT8135_PIN_63_MSDC1_INSI__FUNC_CLKM5 (MTK_PIN_NO(63) | 5) +#define MT8135_PIN_63_MSDC1_INSI__FUNC_TESTB_OUT6 (MTK_PIN_NO(63) | 7) + +#define MT8135_PIN_64_MSDC1_SDWPI__FUNC_GPIO64 (MTK_PIN_NO(64) | 0) +#define MT8135_PIN_64_MSDC1_SDWPI__FUNC_MSDC1_SDWPI (MTK_PIN_NO(64) | 1) +#define MT8135_PIN_64_MSDC1_SDWPI__FUNC_EINT58 (MTK_PIN_NO(64) | 2) +#define MT8135_PIN_64_MSDC1_SDWPI__FUNC_SDA5 (MTK_PIN_NO(64) | 3) +#define MT8135_PIN_64_MSDC1_SDWPI__FUNC_PWM7 (MTK_PIN_NO(64) | 4) +#define MT8135_PIN_64_MSDC1_SDWPI__FUNC_CLKM6 (MTK_PIN_NO(64) | 5) +#define MT8135_PIN_64_MSDC1_SDWPI__FUNC_TESTB_OUT7 (MTK_PIN_NO(64) | 7) + +#define MT8135_PIN_65_MSDC2_INSI__FUNC_GPIO65 (MTK_PIN_NO(65) | 0) +#define MT8135_PIN_65_MSDC2_INSI__FUNC_MSDC2_INSI (MTK_PIN_NO(65) | 1) +#define MT8135_PIN_65_MSDC2_INSI__FUNC_USB_TEST_IO_27 (MTK_PIN_NO(65) | 5) +#define MT8135_PIN_65_MSDC2_INSI__FUNC_TESTA_OUT3 (MTK_PIN_NO(65) | 7) + +#define MT8135_PIN_66_MSDC2_SDWPI__FUNC_GPIO66 (MTK_PIN_NO(66) | 0) +#define MT8135_PIN_66_MSDC2_SDWPI__FUNC_MSDC2_SDWPI (MTK_PIN_NO(66) | 1) +#define MT8135_PIN_66_MSDC2_SDWPI__FUNC_EINT66 (MTK_PIN_NO(66) | 2) +#define MT8135_PIN_66_MSDC2_SDWPI__FUNC_USB_TEST_IO_28 (MTK_PIN_NO(66) | 5) + +#define MT8135_PIN_67_URXD4__FUNC_GPIO67 (MTK_PIN_NO(67) | 0) +#define MT8135_PIN_67_URXD4__FUNC_URXD4 (MTK_PIN_NO(67) | 1) +#define MT8135_PIN_67_URXD4__FUNC_EINT89 (MTK_PIN_NO(67) | 2) +#define MT8135_PIN_67_URXD4__FUNC_URXD1 (MTK_PIN_NO(67) | 3) +#define MT8135_PIN_67_URXD4__FUNC_UTXD4 (MTK_PIN_NO(67) | 6) +#define MT8135_PIN_67_URXD4__FUNC_TESTB_OUT10 (MTK_PIN_NO(67) | 7) + +#define MT8135_PIN_68_UTXD4__FUNC_GPIO68 (MTK_PIN_NO(68) | 0) +#define MT8135_PIN_68_UTXD4__FUNC_UTXD4 (MTK_PIN_NO(68) | 1) +#define MT8135_PIN_68_UTXD4__FUNC_EINT88 (MTK_PIN_NO(68) | 2) +#define MT8135_PIN_68_UTXD4__FUNC_UTXD1 (MTK_PIN_NO(68) | 3) +#define MT8135_PIN_68_UTXD4__FUNC_URXD4 (MTK_PIN_NO(68) | 6) +#define MT8135_PIN_68_UTXD4__FUNC_TESTB_OUT11 (MTK_PIN_NO(68) | 7) + +#define MT8135_PIN_69_URXD1__FUNC_GPIO69 (MTK_PIN_NO(69) | 0) +#define MT8135_PIN_69_URXD1__FUNC_URXD1 (MTK_PIN_NO(69) | 1) +#define MT8135_PIN_69_URXD1__FUNC_EINT79 (MTK_PIN_NO(69) | 2) +#define MT8135_PIN_69_URXD1__FUNC_URXD4 (MTK_PIN_NO(69) | 3) +#define MT8135_PIN_69_URXD1__FUNC_UTXD1 (MTK_PIN_NO(69) | 6) +#define MT8135_PIN_69_URXD1__FUNC_TESTB_OUT24 (MTK_PIN_NO(69) | 7) + +#define MT8135_PIN_70_UTXD1__FUNC_GPIO70 (MTK_PIN_NO(70) | 0) +#define MT8135_PIN_70_UTXD1__FUNC_UTXD1 (MTK_PIN_NO(70) | 1) +#define MT8135_PIN_70_UTXD1__FUNC_EINT78 (MTK_PIN_NO(70) | 2) +#define MT8135_PIN_70_UTXD1__FUNC_UTXD4 (MTK_PIN_NO(70) | 3) +#define MT8135_PIN_70_UTXD1__FUNC_URXD1 (MTK_PIN_NO(70) | 6) +#define MT8135_PIN_70_UTXD1__FUNC_TESTB_OUT25 (MTK_PIN_NO(70) | 7) + +#define MT8135_PIN_71_UCTS1__FUNC_GPIO71 (MTK_PIN_NO(71) | 0) +#define MT8135_PIN_71_UCTS1__FUNC_UCTS1 (MTK_PIN_NO(71) | 1) +#define MT8135_PIN_71_UCTS1__FUNC_EINT80 (MTK_PIN_NO(71) | 2) +#define MT8135_PIN_71_UCTS1__FUNC_CLKM0 (MTK_PIN_NO(71) | 5) +#define MT8135_PIN_71_UCTS1__FUNC_URTS1 (MTK_PIN_NO(71) | 6) +#define MT8135_PIN_71_UCTS1__FUNC_TESTB_OUT31 (MTK_PIN_NO(71) | 7) + +#define MT8135_PIN_72_URTS1__FUNC_GPIO72 (MTK_PIN_NO(72) | 0) +#define MT8135_PIN_72_URTS1__FUNC_URTS1 (MTK_PIN_NO(72) | 1) +#define MT8135_PIN_72_URTS1__FUNC_EINT81 (MTK_PIN_NO(72) | 2) +#define MT8135_PIN_72_URTS1__FUNC_CLKM1 (MTK_PIN_NO(72) | 5) +#define MT8135_PIN_72_URTS1__FUNC_UCTS1 (MTK_PIN_NO(72) | 6) +#define MT8135_PIN_72_URTS1__FUNC_TESTB_OUT21 (MTK_PIN_NO(72) | 7) + +#define MT8135_PIN_73_PWM1__FUNC_GPIO73 (MTK_PIN_NO(73) | 0) +#define MT8135_PIN_73_PWM1__FUNC_PWM1 (MTK_PIN_NO(73) | 1) +#define MT8135_PIN_73_PWM1__FUNC_EINT73 (MTK_PIN_NO(73) | 2) +#define MT8135_PIN_73_PWM1__FUNC_USB_DRVVBUS (MTK_PIN_NO(73) | 5) +#define MT8135_PIN_73_PWM1__FUNC_DISP_PWM (MTK_PIN_NO(73) | 6) +#define MT8135_PIN_73_PWM1__FUNC_TESTB_OUT8 (MTK_PIN_NO(73) | 7) + +#define MT8135_PIN_74_PWM2__FUNC_GPIO74 (MTK_PIN_NO(74) | 0) +#define MT8135_PIN_74_PWM2__FUNC_PWM2 (MTK_PIN_NO(74) | 1) +#define MT8135_PIN_74_PWM2__FUNC_EINT74 (MTK_PIN_NO(74) | 2) +#define MT8135_PIN_74_PWM2__FUNC_DPI33_CK (MTK_PIN_NO(74) | 3) +#define MT8135_PIN_74_PWM2__FUNC_PWM5 (MTK_PIN_NO(74) | 4) +#define MT8135_PIN_74_PWM2__FUNC_URXD2 (MTK_PIN_NO(74) | 5) +#define MT8135_PIN_74_PWM2__FUNC_DISP_PWM (MTK_PIN_NO(74) | 6) +#define MT8135_PIN_74_PWM2__FUNC_TESTB_OUT9 (MTK_PIN_NO(74) | 7) + +#define MT8135_PIN_75_PWM3__FUNC_GPIO75 (MTK_PIN_NO(75) | 0) +#define MT8135_PIN_75_PWM3__FUNC_PWM3 (MTK_PIN_NO(75) | 1) +#define MT8135_PIN_75_PWM3__FUNC_EINT75 (MTK_PIN_NO(75) | 2) +#define MT8135_PIN_75_PWM3__FUNC_DPI33_D0 (MTK_PIN_NO(75) | 3) +#define MT8135_PIN_75_PWM3__FUNC_PWM6 (MTK_PIN_NO(75) | 4) +#define MT8135_PIN_75_PWM3__FUNC_UTXD2 (MTK_PIN_NO(75) | 5) +#define MT8135_PIN_75_PWM3__FUNC_DISP_PWM (MTK_PIN_NO(75) | 6) +#define MT8135_PIN_75_PWM3__FUNC_TESTB_OUT12 (MTK_PIN_NO(75) | 7) + +#define MT8135_PIN_76_PWM4__FUNC_GPIO76 (MTK_PIN_NO(76) | 0) +#define MT8135_PIN_76_PWM4__FUNC_PWM4 (MTK_PIN_NO(76) | 1) +#define MT8135_PIN_76_PWM4__FUNC_EINT76 (MTK_PIN_NO(76) | 2) +#define MT8135_PIN_76_PWM4__FUNC_DPI33_D1 (MTK_PIN_NO(76) | 3) +#define MT8135_PIN_76_PWM4__FUNC_PWM7 (MTK_PIN_NO(76) | 4) +#define MT8135_PIN_76_PWM4__FUNC_DISP_PWM (MTK_PIN_NO(76) | 6) +#define MT8135_PIN_76_PWM4__FUNC_TESTB_OUT13 (MTK_PIN_NO(76) | 7) + +#define MT8135_PIN_77_MSDC2_DAT2__FUNC_GPIO77 (MTK_PIN_NO(77) | 0) +#define MT8135_PIN_77_MSDC2_DAT2__FUNC_MSDC2_DAT2 (MTK_PIN_NO(77) | 1) +#define MT8135_PIN_77_MSDC2_DAT2__FUNC_EINT63 (MTK_PIN_NO(77) | 2) +#define MT8135_PIN_77_MSDC2_DAT2__FUNC_DSP2_IMS (MTK_PIN_NO(77) | 4) +#define MT8135_PIN_77_MSDC2_DAT2__FUNC_DPI33_D6 (MTK_PIN_NO(77) | 6) +#define MT8135_PIN_77_MSDC2_DAT2__FUNC_TESTA_OUT25 (MTK_PIN_NO(77) | 7) + +#define MT8135_PIN_78_MSDC2_DAT3__FUNC_GPIO78 (MTK_PIN_NO(78) | 0) +#define MT8135_PIN_78_MSDC2_DAT3__FUNC_MSDC2_DAT3 (MTK_PIN_NO(78) | 1) +#define MT8135_PIN_78_MSDC2_DAT3__FUNC_EINT64 (MTK_PIN_NO(78) | 2) +#define MT8135_PIN_78_MSDC2_DAT3__FUNC_DSP2_ID (MTK_PIN_NO(78) | 4) +#define MT8135_PIN_78_MSDC2_DAT3__FUNC_DPI33_D7 (MTK_PIN_NO(78) | 6) +#define MT8135_PIN_78_MSDC2_DAT3__FUNC_TESTA_OUT26 (MTK_PIN_NO(78) | 7) + +#define MT8135_PIN_79_MSDC2_CMD__FUNC_GPIO79 (MTK_PIN_NO(79) | 0) +#define MT8135_PIN_79_MSDC2_CMD__FUNC_MSDC2_CMD (MTK_PIN_NO(79) | 1) +#define MT8135_PIN_79_MSDC2_CMD__FUNC_EINT60 (MTK_PIN_NO(79) | 2) +#define MT8135_PIN_79_MSDC2_CMD__FUNC_DSP1_IMS (MTK_PIN_NO(79) | 4) +#define MT8135_PIN_79_MSDC2_CMD__FUNC_PCM1_WS (MTK_PIN_NO(79) | 5) +#define MT8135_PIN_79_MSDC2_CMD__FUNC_DPI33_D3 (MTK_PIN_NO(79) | 6) +#define MT8135_PIN_79_MSDC2_CMD__FUNC_TESTA_OUT0 (MTK_PIN_NO(79) | 7) + +#define MT8135_PIN_80_MSDC2_CLK__FUNC_GPIO80 (MTK_PIN_NO(80) | 0) +#define MT8135_PIN_80_MSDC2_CLK__FUNC_MSDC2_CLK (MTK_PIN_NO(80) | 1) +#define MT8135_PIN_80_MSDC2_CLK__FUNC_EINT59 (MTK_PIN_NO(80) | 2) +#define MT8135_PIN_80_MSDC2_CLK__FUNC_DSP1_ICK (MTK_PIN_NO(80) | 4) +#define MT8135_PIN_80_MSDC2_CLK__FUNC_PCM1_CK (MTK_PIN_NO(80) | 5) +#define MT8135_PIN_80_MSDC2_CLK__FUNC_DPI33_D2 (MTK_PIN_NO(80) | 6) +#define MT8135_PIN_80_MSDC2_CLK__FUNC_TESTA_OUT1 (MTK_PIN_NO(80) | 7) + +#define MT8135_PIN_81_MSDC2_DAT1__FUNC_GPIO81 (MTK_PIN_NO(81) | 0) +#define MT8135_PIN_81_MSDC2_DAT1__FUNC_MSDC2_DAT1 (MTK_PIN_NO(81) | 1) +#define MT8135_PIN_81_MSDC2_DAT1__FUNC_EINT62 (MTK_PIN_NO(81) | 2) +#define MT8135_PIN_81_MSDC2_DAT1__FUNC_DSP2_ICK (MTK_PIN_NO(81) | 4) +#define MT8135_PIN_81_MSDC2_DAT1__FUNC_PCM1_DO (MTK_PIN_NO(81) | 5) +#define MT8135_PIN_81_MSDC2_DAT1__FUNC_DPI33_D5 (MTK_PIN_NO(81) | 6) + +#define MT8135_PIN_82_MSDC2_DAT0__FUNC_GPIO82 (MTK_PIN_NO(82) | 0) +#define MT8135_PIN_82_MSDC2_DAT0__FUNC_MSDC2_DAT0 (MTK_PIN_NO(82) | 1) +#define MT8135_PIN_82_MSDC2_DAT0__FUNC_EINT61 (MTK_PIN_NO(82) | 2) +#define MT8135_PIN_82_MSDC2_DAT0__FUNC_DSP1_ID (MTK_PIN_NO(82) | 4) +#define MT8135_PIN_82_MSDC2_DAT0__FUNC_PCM1_DI (MTK_PIN_NO(82) | 5) +#define MT8135_PIN_82_MSDC2_DAT0__FUNC_DPI33_D4 (MTK_PIN_NO(82) | 6) + +#define MT8135_PIN_83_MSDC1_DAT0__FUNC_GPIO83 (MTK_PIN_NO(83) | 0) +#define MT8135_PIN_83_MSDC1_DAT0__FUNC_MSDC1_DAT0 (MTK_PIN_NO(83) | 1) +#define MT8135_PIN_83_MSDC1_DAT0__FUNC_EINT53 (MTK_PIN_NO(83) | 2) +#define MT8135_PIN_83_MSDC1_DAT0__FUNC_SCL1 (MTK_PIN_NO(83) | 3) +#define MT8135_PIN_83_MSDC1_DAT0__FUNC_PWM2 (MTK_PIN_NO(83) | 4) +#define MT8135_PIN_83_MSDC1_DAT0__FUNC_CLKM1 (MTK_PIN_NO(83) | 5) +#define MT8135_PIN_83_MSDC1_DAT0__FUNC_TESTB_OUT2 (MTK_PIN_NO(83) | 7) + +#define MT8135_PIN_84_MSDC1_DAT1__FUNC_GPIO84 (MTK_PIN_NO(84) | 0) +#define MT8135_PIN_84_MSDC1_DAT1__FUNC_MSDC1_DAT1 (MTK_PIN_NO(84) | 1) +#define MT8135_PIN_84_MSDC1_DAT1__FUNC_EINT54 (MTK_PIN_NO(84) | 2) +#define MT8135_PIN_84_MSDC1_DAT1__FUNC_SDA1 (MTK_PIN_NO(84) | 3) +#define MT8135_PIN_84_MSDC1_DAT1__FUNC_PWM3 (MTK_PIN_NO(84) | 4) +#define MT8135_PIN_84_MSDC1_DAT1__FUNC_CLKM2 (MTK_PIN_NO(84) | 5) +#define MT8135_PIN_84_MSDC1_DAT1__FUNC_TESTB_OUT3 (MTK_PIN_NO(84) | 7) + +#define MT8135_PIN_85_MSDC1_CMD__FUNC_GPIO85 (MTK_PIN_NO(85) | 0) +#define MT8135_PIN_85_MSDC1_CMD__FUNC_MSDC1_CMD (MTK_PIN_NO(85) | 1) +#define MT8135_PIN_85_MSDC1_CMD__FUNC_EINT52 (MTK_PIN_NO(85) | 2) +#define MT8135_PIN_85_MSDC1_CMD__FUNC_SDA0 (MTK_PIN_NO(85) | 3) +#define MT8135_PIN_85_MSDC1_CMD__FUNC_PWM1 (MTK_PIN_NO(85) | 4) +#define MT8135_PIN_85_MSDC1_CMD__FUNC_CLKM0 (MTK_PIN_NO(85) | 5) +#define MT8135_PIN_85_MSDC1_CMD__FUNC_TESTB_OUT1 (MTK_PIN_NO(85) | 7) + +#define MT8135_PIN_86_MSDC1_CLK__FUNC_GPIO86 (MTK_PIN_NO(86) | 0) +#define MT8135_PIN_86_MSDC1_CLK__FUNC_MSDC1_CLK (MTK_PIN_NO(86) | 1) +#define MT8135_PIN_86_MSDC1_CLK__FUNC_EINT51 (MTK_PIN_NO(86) | 2) +#define MT8135_PIN_86_MSDC1_CLK__FUNC_SCL0 (MTK_PIN_NO(86) | 3) +#define MT8135_PIN_86_MSDC1_CLK__FUNC_DISP_PWM (MTK_PIN_NO(86) | 4) +#define MT8135_PIN_86_MSDC1_CLK__FUNC_TESTB_OUT0 (MTK_PIN_NO(86) | 7) + +#define MT8135_PIN_87_MSDC1_DAT2__FUNC_GPIO87 (MTK_PIN_NO(87) | 0) +#define MT8135_PIN_87_MSDC1_DAT2__FUNC_MSDC1_DAT2 (MTK_PIN_NO(87) | 1) +#define MT8135_PIN_87_MSDC1_DAT2__FUNC_EINT55 (MTK_PIN_NO(87) | 2) +#define MT8135_PIN_87_MSDC1_DAT2__FUNC_SCL4 (MTK_PIN_NO(87) | 3) +#define MT8135_PIN_87_MSDC1_DAT2__FUNC_PWM4 (MTK_PIN_NO(87) | 4) +#define MT8135_PIN_87_MSDC1_DAT2__FUNC_CLKM3 (MTK_PIN_NO(87) | 5) +#define MT8135_PIN_87_MSDC1_DAT2__FUNC_TESTB_OUT4 (MTK_PIN_NO(87) | 7) + +#define MT8135_PIN_88_MSDC1_DAT3__FUNC_GPIO88 (MTK_PIN_NO(88) | 0) +#define MT8135_PIN_88_MSDC1_DAT3__FUNC_MSDC1_DAT3 (MTK_PIN_NO(88) | 1) +#define MT8135_PIN_88_MSDC1_DAT3__FUNC_EINT56 (MTK_PIN_NO(88) | 2) +#define MT8135_PIN_88_MSDC1_DAT3__FUNC_SDA4 (MTK_PIN_NO(88) | 3) +#define MT8135_PIN_88_MSDC1_DAT3__FUNC_PWM5 (MTK_PIN_NO(88) | 4) +#define MT8135_PIN_88_MSDC1_DAT3__FUNC_CLKM4 (MTK_PIN_NO(88) | 5) +#define MT8135_PIN_88_MSDC1_DAT3__FUNC_TESTB_OUT5 (MTK_PIN_NO(88) | 7) + +#define MT8135_PIN_89_MSDC4_DAT0__FUNC_GPIO89 (MTK_PIN_NO(89) | 0) +#define MT8135_PIN_89_MSDC4_DAT0__FUNC_MSDC4_DAT0 (MTK_PIN_NO(89) | 1) +#define MT8135_PIN_89_MSDC4_DAT0__FUNC_EINT133 (MTK_PIN_NO(89) | 2) +#define MT8135_PIN_89_MSDC4_DAT0__FUNC_EXT_FRAME_SYNC (MTK_PIN_NO(89) | 4) +#define MT8135_PIN_89_MSDC4_DAT0__FUNC_USB_DRVVBUS (MTK_PIN_NO(89) | 5) +#define MT8135_PIN_89_MSDC4_DAT0__FUNC_A_FUNC_DIN_9 (MTK_PIN_NO(89) | 6) +#define MT8135_PIN_89_MSDC4_DAT0__FUNC_LPTE (MTK_PIN_NO(89) | 7) + +#define MT8135_PIN_90_MSDC4_DAT1__FUNC_GPIO90 (MTK_PIN_NO(90) | 0) +#define MT8135_PIN_90_MSDC4_DAT1__FUNC_MSDC4_DAT1 (MTK_PIN_NO(90) | 1) +#define MT8135_PIN_90_MSDC4_DAT1__FUNC_EINT134 (MTK_PIN_NO(90) | 2) +#define MT8135_PIN_90_MSDC4_DAT1__FUNC_A_FUNC_DIN_10 (MTK_PIN_NO(90) | 6) +#define MT8135_PIN_90_MSDC4_DAT1__FUNC_LRSTB_1X (MTK_PIN_NO(90) | 7) + +#define MT8135_PIN_91_MSDC4_DAT5__FUNC_GPIO91 (MTK_PIN_NO(91) | 0) +#define MT8135_PIN_91_MSDC4_DAT5__FUNC_MSDC4_DAT5 (MTK_PIN_NO(91) | 1) +#define MT8135_PIN_91_MSDC4_DAT5__FUNC_EINT136 (MTK_PIN_NO(91) | 2) +#define MT8135_PIN_91_MSDC4_DAT5__FUNC_I2SIN_WS (MTK_PIN_NO(91) | 3) +#define MT8135_PIN_91_MSDC4_DAT5__FUNC_DAC_WS (MTK_PIN_NO(91) | 4) +#define MT8135_PIN_91_MSDC4_DAT5__FUNC_PCM1_WS (MTK_PIN_NO(91) | 5) +#define MT8135_PIN_91_MSDC4_DAT5__FUNC_A_FUNC_DIN_11 (MTK_PIN_NO(91) | 6) +#define MT8135_PIN_91_MSDC4_DAT5__FUNC_SPI1_CSN (MTK_PIN_NO(91) | 7) + +#define MT8135_PIN_92_MSDC4_DAT6__FUNC_GPIO92 (MTK_PIN_NO(92) | 0) +#define MT8135_PIN_92_MSDC4_DAT6__FUNC_MSDC4_DAT6 (MTK_PIN_NO(92) | 1) +#define MT8135_PIN_92_MSDC4_DAT6__FUNC_EINT137 (MTK_PIN_NO(92) | 2) +#define MT8135_PIN_92_MSDC4_DAT6__FUNC_I2SOUT_DAT (MTK_PIN_NO(92) | 3) +#define MT8135_PIN_92_MSDC4_DAT6__FUNC_DAC_DAT_OUT (MTK_PIN_NO(92) | 4) +#define MT8135_PIN_92_MSDC4_DAT6__FUNC_PCM1_DO (MTK_PIN_NO(92) | 5) +#define MT8135_PIN_92_MSDC4_DAT6__FUNC_A_FUNC_DIN_12 (MTK_PIN_NO(92) | 6) +#define MT8135_PIN_92_MSDC4_DAT6__FUNC_SPI1_MO (MTK_PIN_NO(92) | 7) + +#define MT8135_PIN_93_MSDC4_DAT7__FUNC_GPIO93 (MTK_PIN_NO(93) | 0) +#define MT8135_PIN_93_MSDC4_DAT7__FUNC_MSDC4_DAT7 (MTK_PIN_NO(93) | 1) +#define MT8135_PIN_93_MSDC4_DAT7__FUNC_EINT138 (MTK_PIN_NO(93) | 2) +#define MT8135_PIN_93_MSDC4_DAT7__FUNC_I2SIN_DAT (MTK_PIN_NO(93) | 3) +#define MT8135_PIN_93_MSDC4_DAT7__FUNC_PCM1_DI (MTK_PIN_NO(93) | 5) +#define MT8135_PIN_93_MSDC4_DAT7__FUNC_A_FUNC_DIN_13 (MTK_PIN_NO(93) | 6) +#define MT8135_PIN_93_MSDC4_DAT7__FUNC_SPI1_MI (MTK_PIN_NO(93) | 7) + +#define MT8135_PIN_94_MSDC4_DAT4__FUNC_GPIO94 (MTK_PIN_NO(94) | 0) +#define MT8135_PIN_94_MSDC4_DAT4__FUNC_MSDC4_DAT4 (MTK_PIN_NO(94) | 1) +#define MT8135_PIN_94_MSDC4_DAT4__FUNC_EINT135 (MTK_PIN_NO(94) | 2) +#define MT8135_PIN_94_MSDC4_DAT4__FUNC_I2SIN_CK (MTK_PIN_NO(94) | 3) +#define MT8135_PIN_94_MSDC4_DAT4__FUNC_DAC_CK (MTK_PIN_NO(94) | 4) +#define MT8135_PIN_94_MSDC4_DAT4__FUNC_PCM1_CK (MTK_PIN_NO(94) | 5) +#define MT8135_PIN_94_MSDC4_DAT4__FUNC_A_FUNC_DIN_14 (MTK_PIN_NO(94) | 6) +#define MT8135_PIN_94_MSDC4_DAT4__FUNC_SPI1_CLK (MTK_PIN_NO(94) | 7) + +#define MT8135_PIN_95_MSDC4_DAT2__FUNC_GPIO95 (MTK_PIN_NO(95) | 0) +#define MT8135_PIN_95_MSDC4_DAT2__FUNC_MSDC4_DAT2 (MTK_PIN_NO(95) | 1) +#define MT8135_PIN_95_MSDC4_DAT2__FUNC_EINT131 (MTK_PIN_NO(95) | 2) +#define MT8135_PIN_95_MSDC4_DAT2__FUNC_I2SIN_WS (MTK_PIN_NO(95) | 3) +#define MT8135_PIN_95_MSDC4_DAT2__FUNC_CM2PDN_2X (MTK_PIN_NO(95) | 4) +#define MT8135_PIN_95_MSDC4_DAT2__FUNC_DAC_WS (MTK_PIN_NO(95) | 5) +#define MT8135_PIN_95_MSDC4_DAT2__FUNC_PCM1_WS (MTK_PIN_NO(95) | 6) +#define MT8135_PIN_95_MSDC4_DAT2__FUNC_LSCE0B_1X (MTK_PIN_NO(95) | 7) + +#define MT8135_PIN_96_MSDC4_CLK__FUNC_GPIO96 (MTK_PIN_NO(96) | 0) +#define MT8135_PIN_96_MSDC4_CLK__FUNC_MSDC4_CLK (MTK_PIN_NO(96) | 1) +#define MT8135_PIN_96_MSDC4_CLK__FUNC_EINT129 (MTK_PIN_NO(96) | 2) +#define MT8135_PIN_96_MSDC4_CLK__FUNC_DPI1_CK_2X (MTK_PIN_NO(96) | 3) +#define MT8135_PIN_96_MSDC4_CLK__FUNC_CM2PCLK_2X (MTK_PIN_NO(96) | 4) +#define MT8135_PIN_96_MSDC4_CLK__FUNC_PWM4 (MTK_PIN_NO(96) | 5) +#define MT8135_PIN_96_MSDC4_CLK__FUNC_PCM1_DI (MTK_PIN_NO(96) | 6) +#define MT8135_PIN_96_MSDC4_CLK__FUNC_LSCK_1X (MTK_PIN_NO(96) | 7) + +#define MT8135_PIN_97_MSDC4_DAT3__FUNC_GPIO97 (MTK_PIN_NO(97) | 0) +#define MT8135_PIN_97_MSDC4_DAT3__FUNC_MSDC4_DAT3 (MTK_PIN_NO(97) | 1) +#define MT8135_PIN_97_MSDC4_DAT3__FUNC_EINT132 (MTK_PIN_NO(97) | 2) +#define MT8135_PIN_97_MSDC4_DAT3__FUNC_I2SOUT_DAT (MTK_PIN_NO(97) | 3) +#define MT8135_PIN_97_MSDC4_DAT3__FUNC_CM2RST_2X (MTK_PIN_NO(97) | 4) +#define MT8135_PIN_97_MSDC4_DAT3__FUNC_DAC_DAT_OUT (MTK_PIN_NO(97) | 5) +#define MT8135_PIN_97_MSDC4_DAT3__FUNC_PCM1_DO (MTK_PIN_NO(97) | 6) +#define MT8135_PIN_97_MSDC4_DAT3__FUNC_LSCE1B_1X (MTK_PIN_NO(97) | 7) + +#define MT8135_PIN_98_MSDC4_CMD__FUNC_GPIO98 (MTK_PIN_NO(98) | 0) +#define MT8135_PIN_98_MSDC4_CMD__FUNC_MSDC4_CMD (MTK_PIN_NO(98) | 1) +#define MT8135_PIN_98_MSDC4_CMD__FUNC_EINT128 (MTK_PIN_NO(98) | 2) +#define MT8135_PIN_98_MSDC4_CMD__FUNC_DPI1_DE_2X (MTK_PIN_NO(98) | 3) +#define MT8135_PIN_98_MSDC4_CMD__FUNC_PWM3 (MTK_PIN_NO(98) | 5) +#define MT8135_PIN_98_MSDC4_CMD__FUNC_LSDA_1X (MTK_PIN_NO(98) | 7) + +#define MT8135_PIN_99_MSDC4_RSTB__FUNC_GPIO99 (MTK_PIN_NO(99) | 0) +#define MT8135_PIN_99_MSDC4_RSTB__FUNC_MSDC4_RSTB (MTK_PIN_NO(99) | 1) +#define MT8135_PIN_99_MSDC4_RSTB__FUNC_EINT130 (MTK_PIN_NO(99) | 2) +#define MT8135_PIN_99_MSDC4_RSTB__FUNC_I2SIN_CK (MTK_PIN_NO(99) | 3) +#define MT8135_PIN_99_MSDC4_RSTB__FUNC_CM2MCLK_2X (MTK_PIN_NO(99) | 4) +#define MT8135_PIN_99_MSDC4_RSTB__FUNC_DAC_CK (MTK_PIN_NO(99) | 5) +#define MT8135_PIN_99_MSDC4_RSTB__FUNC_PCM1_CK (MTK_PIN_NO(99) | 6) +#define MT8135_PIN_99_MSDC4_RSTB__FUNC_LSA0_1X (MTK_PIN_NO(99) | 7) + +#define MT8135_PIN_100_SDA0__FUNC_GPIO100 (MTK_PIN_NO(100) | 0) +#define MT8135_PIN_100_SDA0__FUNC_SDA0 (MTK_PIN_NO(100) | 1) +#define MT8135_PIN_100_SDA0__FUNC_EINT91 (MTK_PIN_NO(100) | 2) +#define MT8135_PIN_100_SDA0__FUNC_CLKM1 (MTK_PIN_NO(100) | 3) +#define MT8135_PIN_100_SDA0__FUNC_PWM1 (MTK_PIN_NO(100) | 4) +#define MT8135_PIN_100_SDA0__FUNC_A_FUNC_DIN_15 (MTK_PIN_NO(100) | 7) + +#define MT8135_PIN_101_SCL0__FUNC_GPIO101 (MTK_PIN_NO(101) | 0) +#define MT8135_PIN_101_SCL0__FUNC_SCL0 (MTK_PIN_NO(101) | 1) +#define MT8135_PIN_101_SCL0__FUNC_EINT90 (MTK_PIN_NO(101) | 2) +#define MT8135_PIN_101_SCL0__FUNC_CLKM0 (MTK_PIN_NO(101) | 3) +#define MT8135_PIN_101_SCL0__FUNC_DISP_PWM (MTK_PIN_NO(101) | 4) +#define MT8135_PIN_101_SCL0__FUNC_A_FUNC_DIN_16 (MTK_PIN_NO(101) | 7) + +#define MT8135_PIN_102_EINT10_AUXIN2__FUNC_GPIO102 (MTK_PIN_NO(102) | 0) +#define MT8135_PIN_102_EINT10_AUXIN2__FUNC_EINT10 (MTK_PIN_NO(102) | 1) +#define MT8135_PIN_102_EINT10_AUXIN2__FUNC_USB_TEST_IO_16 (MTK_PIN_NO(102) | 5) +#define MT8135_PIN_102_EINT10_AUXIN2__FUNC_TESTB_OUT16 (MTK_PIN_NO(102) | 6) +#define MT8135_PIN_102_EINT10_AUXIN2__FUNC_A_FUNC_DIN_17 (MTK_PIN_NO(102) | 7) + +#define MT8135_PIN_103_EINT11_AUXIN3__FUNC_GPIO103 (MTK_PIN_NO(103) | 0) +#define MT8135_PIN_103_EINT11_AUXIN3__FUNC_EINT11 (MTK_PIN_NO(103) | 1) +#define MT8135_PIN_103_EINT11_AUXIN3__FUNC_USB_TEST_IO_17 (MTK_PIN_NO(103) | 5) +#define MT8135_PIN_103_EINT11_AUXIN3__FUNC_TESTB_OUT17 (MTK_PIN_NO(103) | 6) +#define MT8135_PIN_103_EINT11_AUXIN3__FUNC_A_FUNC_DIN_18 (MTK_PIN_NO(103) | 7) + +#define MT8135_PIN_104_EINT16_AUXIN4__FUNC_GPIO104 (MTK_PIN_NO(104) | 0) +#define MT8135_PIN_104_EINT16_AUXIN4__FUNC_EINT16 (MTK_PIN_NO(104) | 1) +#define MT8135_PIN_104_EINT16_AUXIN4__FUNC_USB_TEST_IO_18 (MTK_PIN_NO(104) | 5) +#define MT8135_PIN_104_EINT16_AUXIN4__FUNC_TESTB_OUT18 (MTK_PIN_NO(104) | 6) +#define MT8135_PIN_104_EINT16_AUXIN4__FUNC_A_FUNC_DIN_19 (MTK_PIN_NO(104) | 7) + +#define MT8135_PIN_105_I2S_CLK__FUNC_GPIO105 (MTK_PIN_NO(105) | 0) +#define MT8135_PIN_105_I2S_CLK__FUNC_I2SIN_CK (MTK_PIN_NO(105) | 1) +#define MT8135_PIN_105_I2S_CLK__FUNC_EINT10 (MTK_PIN_NO(105) | 2) +#define MT8135_PIN_105_I2S_CLK__FUNC_DAC_CK (MTK_PIN_NO(105) | 3) +#define MT8135_PIN_105_I2S_CLK__FUNC_PCM1_CK (MTK_PIN_NO(105) | 4) +#define MT8135_PIN_105_I2S_CLK__FUNC_USB_TEST_IO_19 (MTK_PIN_NO(105) | 5) +#define MT8135_PIN_105_I2S_CLK__FUNC_TESTB_OUT19 (MTK_PIN_NO(105) | 6) +#define MT8135_PIN_105_I2S_CLK__FUNC_A_FUNC_DIN_20 (MTK_PIN_NO(105) | 7) + +#define MT8135_PIN_106_I2S_WS__FUNC_GPIO106 (MTK_PIN_NO(106) | 0) +#define MT8135_PIN_106_I2S_WS__FUNC_I2SIN_WS (MTK_PIN_NO(106) | 1) +#define MT8135_PIN_106_I2S_WS__FUNC_EINT13 (MTK_PIN_NO(106) | 2) +#define MT8135_PIN_106_I2S_WS__FUNC_DAC_WS (MTK_PIN_NO(106) | 3) +#define MT8135_PIN_106_I2S_WS__FUNC_PCM1_WS (MTK_PIN_NO(106) | 4) +#define MT8135_PIN_106_I2S_WS__FUNC_USB_TEST_IO_20 (MTK_PIN_NO(106) | 5) +#define MT8135_PIN_106_I2S_WS__FUNC_TESTB_OUT20 (MTK_PIN_NO(106) | 6) +#define MT8135_PIN_106_I2S_WS__FUNC_A_FUNC_DIN_21 (MTK_PIN_NO(106) | 7) + +#define MT8135_PIN_107_I2S_DATA_IN__FUNC_GPIO107 (MTK_PIN_NO(107) | 0) +#define MT8135_PIN_107_I2S_DATA_IN__FUNC_I2SIN_DAT (MTK_PIN_NO(107) | 1) +#define MT8135_PIN_107_I2S_DATA_IN__FUNC_EINT11 (MTK_PIN_NO(107) | 2) +#define MT8135_PIN_107_I2S_DATA_IN__FUNC_PCM1_DI (MTK_PIN_NO(107) | 4) +#define MT8135_PIN_107_I2S_DATA_IN__FUNC_USB_TEST_IO_21 (MTK_PIN_NO(107) | 5) +#define MT8135_PIN_107_I2S_DATA_IN__FUNC_TESTB_OUT22 (MTK_PIN_NO(107) | 6) +#define MT8135_PIN_107_I2S_DATA_IN__FUNC_A_FUNC_DIN_22 (MTK_PIN_NO(107) | 7) + +#define MT8135_PIN_108_I2S_DATA_OUT__FUNC_GPIO108 (MTK_PIN_NO(108) | 0) +#define MT8135_PIN_108_I2S_DATA_OUT__FUNC_I2SOUT_DAT (MTK_PIN_NO(108) | 1) +#define MT8135_PIN_108_I2S_DATA_OUT__FUNC_EINT12 (MTK_PIN_NO(108) | 2) +#define MT8135_PIN_108_I2S_DATA_OUT__FUNC_DAC_DAT_OUT (MTK_PIN_NO(108) | 3) +#define MT8135_PIN_108_I2S_DATA_OUT__FUNC_PCM1_DO (MTK_PIN_NO(108) | 4) +#define MT8135_PIN_108_I2S_DATA_OUT__FUNC_USB_TEST_IO_22 (MTK_PIN_NO(108) | 5) +#define MT8135_PIN_108_I2S_DATA_OUT__FUNC_TESTB_OUT23 (MTK_PIN_NO(108) | 6) +#define MT8135_PIN_108_I2S_DATA_OUT__FUNC_A_FUNC_DIN_23 (MTK_PIN_NO(108) | 7) + +#define MT8135_PIN_109_EINT5__FUNC_GPIO109 (MTK_PIN_NO(109) | 0) +#define MT8135_PIN_109_EINT5__FUNC_EINT5 (MTK_PIN_NO(109) | 1) +#define MT8135_PIN_109_EINT5__FUNC_PWM5 (MTK_PIN_NO(109) | 2) +#define MT8135_PIN_109_EINT5__FUNC_CLKM3 (MTK_PIN_NO(109) | 3) +#define MT8135_PIN_109_EINT5__FUNC_GPU_JTRSTB (MTK_PIN_NO(109) | 4) +#define MT8135_PIN_109_EINT5__FUNC_USB_TEST_IO_23 (MTK_PIN_NO(109) | 5) +#define MT8135_PIN_109_EINT5__FUNC_TESTB_OUT26 (MTK_PIN_NO(109) | 6) +#define MT8135_PIN_109_EINT5__FUNC_A_FUNC_DIN_24 (MTK_PIN_NO(109) | 7) + +#define MT8135_PIN_110_EINT6__FUNC_GPIO110 (MTK_PIN_NO(110) | 0) +#define MT8135_PIN_110_EINT6__FUNC_EINT6 (MTK_PIN_NO(110) | 1) +#define MT8135_PIN_110_EINT6__FUNC_PWM6 (MTK_PIN_NO(110) | 2) +#define MT8135_PIN_110_EINT6__FUNC_CLKM4 (MTK_PIN_NO(110) | 3) +#define MT8135_PIN_110_EINT6__FUNC_GPU_JTMS (MTK_PIN_NO(110) | 4) +#define MT8135_PIN_110_EINT6__FUNC_USB_TEST_IO_24 (MTK_PIN_NO(110) | 5) +#define MT8135_PIN_110_EINT6__FUNC_TESTB_OUT27 (MTK_PIN_NO(110) | 6) +#define MT8135_PIN_110_EINT6__FUNC_A_FUNC_DIN_25 (MTK_PIN_NO(110) | 7) + +#define MT8135_PIN_111_EINT7__FUNC_GPIO111 (MTK_PIN_NO(111) | 0) +#define MT8135_PIN_111_EINT7__FUNC_EINT7 (MTK_PIN_NO(111) | 1) +#define MT8135_PIN_111_EINT7__FUNC_PWM7 (MTK_PIN_NO(111) | 2) +#define MT8135_PIN_111_EINT7__FUNC_CLKM5 (MTK_PIN_NO(111) | 3) +#define MT8135_PIN_111_EINT7__FUNC_GPU_JTDO (MTK_PIN_NO(111) | 4) +#define MT8135_PIN_111_EINT7__FUNC_USB_TEST_IO_25 (MTK_PIN_NO(111) | 5) +#define MT8135_PIN_111_EINT7__FUNC_TESTB_OUT28 (MTK_PIN_NO(111) | 6) +#define MT8135_PIN_111_EINT7__FUNC_A_FUNC_DIN_26 (MTK_PIN_NO(111) | 7) + +#define MT8135_PIN_112_EINT8__FUNC_GPIO112 (MTK_PIN_NO(112) | 0) +#define MT8135_PIN_112_EINT8__FUNC_EINT8 (MTK_PIN_NO(112) | 1) +#define MT8135_PIN_112_EINT8__FUNC_DISP_PWM (MTK_PIN_NO(112) | 2) +#define MT8135_PIN_112_EINT8__FUNC_CLKM6 (MTK_PIN_NO(112) | 3) +#define MT8135_PIN_112_EINT8__FUNC_GPU_JTDI (MTK_PIN_NO(112) | 4) +#define MT8135_PIN_112_EINT8__FUNC_USB_TEST_IO_26 (MTK_PIN_NO(112) | 5) +#define MT8135_PIN_112_EINT8__FUNC_TESTB_OUT29 (MTK_PIN_NO(112) | 6) +#define MT8135_PIN_112_EINT8__FUNC_EXT_FRAME_SYNC (MTK_PIN_NO(112) | 7) + +#define MT8135_PIN_113_EINT9__FUNC_GPIO113 (MTK_PIN_NO(113) | 0) +#define MT8135_PIN_113_EINT9__FUNC_EINT9 (MTK_PIN_NO(113) | 1) +#define MT8135_PIN_113_EINT9__FUNC_GPU_JTCK (MTK_PIN_NO(113) | 4) +#define MT8135_PIN_113_EINT9__FUNC_USB_DRVVBUS (MTK_PIN_NO(113) | 5) +#define MT8135_PIN_113_EINT9__FUNC_TESTB_OUT30 (MTK_PIN_NO(113) | 6) +#define MT8135_PIN_113_EINT9__FUNC_A_FUNC_DIN_27 (MTK_PIN_NO(113) | 7) + +#define MT8135_PIN_114_LPCE1B__FUNC_GPIO114 (MTK_PIN_NO(114) | 0) +#define MT8135_PIN_114_LPCE1B__FUNC_LPCE1B (MTK_PIN_NO(114) | 1) +#define MT8135_PIN_114_LPCE1B__FUNC_EINT127 (MTK_PIN_NO(114) | 2) +#define MT8135_PIN_114_LPCE1B__FUNC_PWM2 (MTK_PIN_NO(114) | 5) +#define MT8135_PIN_114_LPCE1B__FUNC_TESTB_OUT14 (MTK_PIN_NO(114) | 6) +#define MT8135_PIN_114_LPCE1B__FUNC_A_FUNC_DIN_28 (MTK_PIN_NO(114) | 7) + +#define MT8135_PIN_115_LPCE0B__FUNC_GPIO115 (MTK_PIN_NO(115) | 0) +#define MT8135_PIN_115_LPCE0B__FUNC_LPCE0B (MTK_PIN_NO(115) | 1) +#define MT8135_PIN_115_LPCE0B__FUNC_EINT126 (MTK_PIN_NO(115) | 2) +#define MT8135_PIN_115_LPCE0B__FUNC_PWM1 (MTK_PIN_NO(115) | 5) +#define MT8135_PIN_115_LPCE0B__FUNC_TESTB_OUT15 (MTK_PIN_NO(115) | 6) +#define MT8135_PIN_115_LPCE0B__FUNC_A_FUNC_DIN_29 (MTK_PIN_NO(115) | 7) + +#define MT8135_PIN_116_DISP_PWM__FUNC_GPIO116 (MTK_PIN_NO(116) | 0) +#define MT8135_PIN_116_DISP_PWM__FUNC_DISP_PWM (MTK_PIN_NO(116) | 1) +#define MT8135_PIN_116_DISP_PWM__FUNC_EINT77 (MTK_PIN_NO(116) | 2) +#define MT8135_PIN_116_DISP_PWM__FUNC_LSDI (MTK_PIN_NO(116) | 3) +#define MT8135_PIN_116_DISP_PWM__FUNC_PWM1 (MTK_PIN_NO(116) | 4) +#define MT8135_PIN_116_DISP_PWM__FUNC_PWM2 (MTK_PIN_NO(116) | 5) +#define MT8135_PIN_116_DISP_PWM__FUNC_PWM3 (MTK_PIN_NO(116) | 7) + +#define MT8135_PIN_117_EINT1__FUNC_GPIO117 (MTK_PIN_NO(117) | 0) +#define MT8135_PIN_117_EINT1__FUNC_EINT1 (MTK_PIN_NO(117) | 1) +#define MT8135_PIN_117_EINT1__FUNC_PWM2 (MTK_PIN_NO(117) | 2) +#define MT8135_PIN_117_EINT1__FUNC_CLKM1 (MTK_PIN_NO(117) | 3) +#define MT8135_PIN_117_EINT1__FUNC_USB_TEST_IO_13 (MTK_PIN_NO(117) | 5) +#define MT8135_PIN_117_EINT1__FUNC_USB_SDA (MTK_PIN_NO(117) | 7) + +#define MT8135_PIN_118_EINT2__FUNC_GPIO118 (MTK_PIN_NO(118) | 0) +#define MT8135_PIN_118_EINT2__FUNC_EINT2 (MTK_PIN_NO(118) | 1) +#define MT8135_PIN_118_EINT2__FUNC_PWM3 (MTK_PIN_NO(118) | 2) +#define MT8135_PIN_118_EINT2__FUNC_CLKM2 (MTK_PIN_NO(118) | 3) +#define MT8135_PIN_118_EINT2__FUNC_USB_TEST_IO_14 (MTK_PIN_NO(118) | 5) +#define MT8135_PIN_118_EINT2__FUNC_SRCLKENAI2 (MTK_PIN_NO(118) | 6) +#define MT8135_PIN_118_EINT2__FUNC_A_FUNC_DIN_30 (MTK_PIN_NO(118) | 7) + +#define MT8135_PIN_119_EINT3__FUNC_GPIO119 (MTK_PIN_NO(119) | 0) +#define MT8135_PIN_119_EINT3__FUNC_EINT3 (MTK_PIN_NO(119) | 1) +#define MT8135_PIN_119_EINT3__FUNC_USB_TEST_IO_15 (MTK_PIN_NO(119) | 5) +#define MT8135_PIN_119_EINT3__FUNC_SRCLKENAI1 (MTK_PIN_NO(119) | 6) +#define MT8135_PIN_119_EINT3__FUNC_EXT_26M_CK (MTK_PIN_NO(119) | 7) + +#define MT8135_PIN_120_EINT4__FUNC_GPIO120 (MTK_PIN_NO(120) | 0) +#define MT8135_PIN_120_EINT4__FUNC_EINT4 (MTK_PIN_NO(120) | 1) +#define MT8135_PIN_120_EINT4__FUNC_PWM4 (MTK_PIN_NO(120) | 2) +#define MT8135_PIN_120_EINT4__FUNC_USB_DRVVBUS (MTK_PIN_NO(120) | 5) +#define MT8135_PIN_120_EINT4__FUNC_A_FUNC_DIN_31 (MTK_PIN_NO(120) | 7) + +#define MT8135_PIN_121_DPIDE__FUNC_GPIO121 (MTK_PIN_NO(121) | 0) +#define MT8135_PIN_121_DPIDE__FUNC_DPI0_DE (MTK_PIN_NO(121) | 1) +#define MT8135_PIN_121_DPIDE__FUNC_EINT100 (MTK_PIN_NO(121) | 2) +#define MT8135_PIN_121_DPIDE__FUNC_I2SOUT_DAT (MTK_PIN_NO(121) | 3) +#define MT8135_PIN_121_DPIDE__FUNC_DAC_DAT_OUT (MTK_PIN_NO(121) | 4) +#define MT8135_PIN_121_DPIDE__FUNC_PCM1_DO (MTK_PIN_NO(121) | 5) +#define MT8135_PIN_121_DPIDE__FUNC_IRDA_TXD (MTK_PIN_NO(121) | 6) + +#define MT8135_PIN_122_DPICK__FUNC_GPIO122 (MTK_PIN_NO(122) | 0) +#define MT8135_PIN_122_DPICK__FUNC_DPI0_CK (MTK_PIN_NO(122) | 1) +#define MT8135_PIN_122_DPICK__FUNC_EINT101 (MTK_PIN_NO(122) | 2) +#define MT8135_PIN_122_DPICK__FUNC_I2SIN_DAT (MTK_PIN_NO(122) | 3) +#define MT8135_PIN_122_DPICK__FUNC_PCM1_DI (MTK_PIN_NO(122) | 5) +#define MT8135_PIN_122_DPICK__FUNC_IRDA_PDN (MTK_PIN_NO(122) | 6) + +#define MT8135_PIN_123_DPIG4__FUNC_GPIO123 (MTK_PIN_NO(123) | 0) +#define MT8135_PIN_123_DPIG4__FUNC_DPI0_G4 (MTK_PIN_NO(123) | 1) +#define MT8135_PIN_123_DPIG4__FUNC_EINT114 (MTK_PIN_NO(123) | 2) +#define MT8135_PIN_123_DPIG4__FUNC_CM2DAT_2X_0 (MTK_PIN_NO(123) | 4) +#define MT8135_PIN_123_DPIG4__FUNC_DSP2_ID (MTK_PIN_NO(123) | 5) + +#define MT8135_PIN_124_DPIG5__FUNC_GPIO124 (MTK_PIN_NO(124) | 0) +#define MT8135_PIN_124_DPIG5__FUNC_DPI0_G5 (MTK_PIN_NO(124) | 1) +#define MT8135_PIN_124_DPIG5__FUNC_EINT115 (MTK_PIN_NO(124) | 2) +#define MT8135_PIN_124_DPIG5__FUNC_CM2DAT_2X_1 (MTK_PIN_NO(124) | 4) +#define MT8135_PIN_124_DPIG5__FUNC_DSP2_ICK (MTK_PIN_NO(124) | 5) + +#define MT8135_PIN_125_DPIR3__FUNC_GPIO125 (MTK_PIN_NO(125) | 0) +#define MT8135_PIN_125_DPIR3__FUNC_DPI0_R3 (MTK_PIN_NO(125) | 1) +#define MT8135_PIN_125_DPIR3__FUNC_EINT121 (MTK_PIN_NO(125) | 2) +#define MT8135_PIN_125_DPIR3__FUNC_CM2DAT_2X_7 (MTK_PIN_NO(125) | 4) + +#define MT8135_PIN_126_DPIG1__FUNC_GPIO126 (MTK_PIN_NO(126) | 0) +#define MT8135_PIN_126_DPIG1__FUNC_DPI0_G1 (MTK_PIN_NO(126) | 1) +#define MT8135_PIN_126_DPIG1__FUNC_EINT111 (MTK_PIN_NO(126) | 2) +#define MT8135_PIN_126_DPIG1__FUNC_DSP1_ICK (MTK_PIN_NO(126) | 5) + +#define MT8135_PIN_127_DPIVSYNC__FUNC_GPIO127 (MTK_PIN_NO(127) | 0) +#define MT8135_PIN_127_DPIVSYNC__FUNC_DPI0_VSYNC (MTK_PIN_NO(127) | 1) +#define MT8135_PIN_127_DPIVSYNC__FUNC_EINT98 (MTK_PIN_NO(127) | 2) +#define MT8135_PIN_127_DPIVSYNC__FUNC_I2SIN_CK (MTK_PIN_NO(127) | 3) +#define MT8135_PIN_127_DPIVSYNC__FUNC_DAC_CK (MTK_PIN_NO(127) | 4) +#define MT8135_PIN_127_DPIVSYNC__FUNC_PCM1_CK (MTK_PIN_NO(127) | 5) + +#define MT8135_PIN_128_DPIHSYNC__FUNC_GPIO128 (MTK_PIN_NO(128) | 0) +#define MT8135_PIN_128_DPIHSYNC__FUNC_DPI0_HSYNC (MTK_PIN_NO(128) | 1) +#define MT8135_PIN_128_DPIHSYNC__FUNC_EINT99 (MTK_PIN_NO(128) | 2) +#define MT8135_PIN_128_DPIHSYNC__FUNC_I2SIN_WS (MTK_PIN_NO(128) | 3) +#define MT8135_PIN_128_DPIHSYNC__FUNC_DAC_WS (MTK_PIN_NO(128) | 4) +#define MT8135_PIN_128_DPIHSYNC__FUNC_PCM1_WS (MTK_PIN_NO(128) | 5) +#define MT8135_PIN_128_DPIHSYNC__FUNC_IRDA_RXD (MTK_PIN_NO(128) | 6) + +#define MT8135_PIN_129_DPIB0__FUNC_GPIO129 (MTK_PIN_NO(129) | 0) +#define MT8135_PIN_129_DPIB0__FUNC_DPI0_B0 (MTK_PIN_NO(129) | 1) +#define MT8135_PIN_129_DPIB0__FUNC_EINT102 (MTK_PIN_NO(129) | 2) +#define MT8135_PIN_129_DPIB0__FUNC_SCL0 (MTK_PIN_NO(129) | 4) +#define MT8135_PIN_129_DPIB0__FUNC_DISP_PWM (MTK_PIN_NO(129) | 5) + +#define MT8135_PIN_130_DPIB1__FUNC_GPIO130 (MTK_PIN_NO(130) | 0) +#define MT8135_PIN_130_DPIB1__FUNC_DPI0_B1 (MTK_PIN_NO(130) | 1) +#define MT8135_PIN_130_DPIB1__FUNC_EINT103 (MTK_PIN_NO(130) | 2) +#define MT8135_PIN_130_DPIB1__FUNC_CLKM0 (MTK_PIN_NO(130) | 3) +#define MT8135_PIN_130_DPIB1__FUNC_SDA0 (MTK_PIN_NO(130) | 4) +#define MT8135_PIN_130_DPIB1__FUNC_PWM1 (MTK_PIN_NO(130) | 5) + +#define MT8135_PIN_131_DPIB2__FUNC_GPIO131 (MTK_PIN_NO(131) | 0) +#define MT8135_PIN_131_DPIB2__FUNC_DPI0_B2 (MTK_PIN_NO(131) | 1) +#define MT8135_PIN_131_DPIB2__FUNC_EINT104 (MTK_PIN_NO(131) | 2) +#define MT8135_PIN_131_DPIB2__FUNC_CLKM1 (MTK_PIN_NO(131) | 3) +#define MT8135_PIN_131_DPIB2__FUNC_SCL1 (MTK_PIN_NO(131) | 4) +#define MT8135_PIN_131_DPIB2__FUNC_PWM2 (MTK_PIN_NO(131) | 5) + +#define MT8135_PIN_132_DPIB3__FUNC_GPIO132 (MTK_PIN_NO(132) | 0) +#define MT8135_PIN_132_DPIB3__FUNC_DPI0_B3 (MTK_PIN_NO(132) | 1) +#define MT8135_PIN_132_DPIB3__FUNC_EINT105 (MTK_PIN_NO(132) | 2) +#define MT8135_PIN_132_DPIB3__FUNC_CLKM2 (MTK_PIN_NO(132) | 3) +#define MT8135_PIN_132_DPIB3__FUNC_SDA1 (MTK_PIN_NO(132) | 4) +#define MT8135_PIN_132_DPIB3__FUNC_PWM3 (MTK_PIN_NO(132) | 5) + +#define MT8135_PIN_133_DPIB4__FUNC_GPIO133 (MTK_PIN_NO(133) | 0) +#define MT8135_PIN_133_DPIB4__FUNC_DPI0_B4 (MTK_PIN_NO(133) | 1) +#define MT8135_PIN_133_DPIB4__FUNC_EINT106 (MTK_PIN_NO(133) | 2) +#define MT8135_PIN_133_DPIB4__FUNC_CLKM3 (MTK_PIN_NO(133) | 3) +#define MT8135_PIN_133_DPIB4__FUNC_SCL2 (MTK_PIN_NO(133) | 4) +#define MT8135_PIN_133_DPIB4__FUNC_PWM4 (MTK_PIN_NO(133) | 5) + +#define MT8135_PIN_134_DPIB5__FUNC_GPIO134 (MTK_PIN_NO(134) | 0) +#define MT8135_PIN_134_DPIB5__FUNC_DPI0_B5 (MTK_PIN_NO(134) | 1) +#define MT8135_PIN_134_DPIB5__FUNC_EINT107 (MTK_PIN_NO(134) | 2) +#define MT8135_PIN_134_DPIB5__FUNC_CLKM4 (MTK_PIN_NO(134) | 3) +#define MT8135_PIN_134_DPIB5__FUNC_SDA2 (MTK_PIN_NO(134) | 4) +#define MT8135_PIN_134_DPIB5__FUNC_PWM5 (MTK_PIN_NO(134) | 5) + +#define MT8135_PIN_135_DPIB6__FUNC_GPIO135 (MTK_PIN_NO(135) | 0) +#define MT8135_PIN_135_DPIB6__FUNC_DPI0_B6 (MTK_PIN_NO(135) | 1) +#define MT8135_PIN_135_DPIB6__FUNC_EINT108 (MTK_PIN_NO(135) | 2) +#define MT8135_PIN_135_DPIB6__FUNC_CLKM5 (MTK_PIN_NO(135) | 3) +#define MT8135_PIN_135_DPIB6__FUNC_SCL3 (MTK_PIN_NO(135) | 4) +#define MT8135_PIN_135_DPIB6__FUNC_PWM6 (MTK_PIN_NO(135) | 5) + +#define MT8135_PIN_136_DPIB7__FUNC_GPIO136 (MTK_PIN_NO(136) | 0) +#define MT8135_PIN_136_DPIB7__FUNC_DPI0_B7 (MTK_PIN_NO(136) | 1) +#define MT8135_PIN_136_DPIB7__FUNC_EINT109 (MTK_PIN_NO(136) | 2) +#define MT8135_PIN_136_DPIB7__FUNC_CLKM6 (MTK_PIN_NO(136) | 3) +#define MT8135_PIN_136_DPIB7__FUNC_SDA3 (MTK_PIN_NO(136) | 4) +#define MT8135_PIN_136_DPIB7__FUNC_PWM7 (MTK_PIN_NO(136) | 5) + +#define MT8135_PIN_137_DPIG0__FUNC_GPIO137 (MTK_PIN_NO(137) | 0) +#define MT8135_PIN_137_DPIG0__FUNC_DPI0_G0 (MTK_PIN_NO(137) | 1) +#define MT8135_PIN_137_DPIG0__FUNC_EINT110 (MTK_PIN_NO(137) | 2) +#define MT8135_PIN_137_DPIG0__FUNC_DSP1_ID (MTK_PIN_NO(137) | 5) + +#define MT8135_PIN_138_DPIG2__FUNC_GPIO138 (MTK_PIN_NO(138) | 0) +#define MT8135_PIN_138_DPIG2__FUNC_DPI0_G2 (MTK_PIN_NO(138) | 1) +#define MT8135_PIN_138_DPIG2__FUNC_EINT112 (MTK_PIN_NO(138) | 2) +#define MT8135_PIN_138_DPIG2__FUNC_DSP1_IMS (MTK_PIN_NO(138) | 5) + +#define MT8135_PIN_139_DPIG3__FUNC_GPIO139 (MTK_PIN_NO(139) | 0) +#define MT8135_PIN_139_DPIG3__FUNC_DPI0_G3 (MTK_PIN_NO(139) | 1) +#define MT8135_PIN_139_DPIG3__FUNC_EINT113 (MTK_PIN_NO(139) | 2) +#define MT8135_PIN_139_DPIG3__FUNC_DSP2_IMS (MTK_PIN_NO(139) | 5) + +#define MT8135_PIN_140_DPIG6__FUNC_GPIO140 (MTK_PIN_NO(140) | 0) +#define MT8135_PIN_140_DPIG6__FUNC_DPI0_G6 (MTK_PIN_NO(140) | 1) +#define MT8135_PIN_140_DPIG6__FUNC_EINT116 (MTK_PIN_NO(140) | 2) +#define MT8135_PIN_140_DPIG6__FUNC_CM2DAT_2X_2 (MTK_PIN_NO(140) | 4) + +#define MT8135_PIN_141_DPIG7__FUNC_GPIO141 (MTK_PIN_NO(141) | 0) +#define MT8135_PIN_141_DPIG7__FUNC_DPI0_G7 (MTK_PIN_NO(141) | 1) +#define MT8135_PIN_141_DPIG7__FUNC_EINT117 (MTK_PIN_NO(141) | 2) +#define MT8135_PIN_141_DPIG7__FUNC_CM2DAT_2X_3 (MTK_PIN_NO(141) | 4) + +#define MT8135_PIN_142_DPIR0__FUNC_GPIO142 (MTK_PIN_NO(142) | 0) +#define MT8135_PIN_142_DPIR0__FUNC_DPI0_R0 (MTK_PIN_NO(142) | 1) +#define MT8135_PIN_142_DPIR0__FUNC_EINT118 (MTK_PIN_NO(142) | 2) +#define MT8135_PIN_142_DPIR0__FUNC_CM2DAT_2X_4 (MTK_PIN_NO(142) | 4) + +#define MT8135_PIN_143_DPIR1__FUNC_GPIO143 (MTK_PIN_NO(143) | 0) +#define MT8135_PIN_143_DPIR1__FUNC_DPI0_R1 (MTK_PIN_NO(143) | 1) +#define MT8135_PIN_143_DPIR1__FUNC_EINT119 (MTK_PIN_NO(143) | 2) +#define MT8135_PIN_143_DPIR1__FUNC_CM2DAT_2X_5 (MTK_PIN_NO(143) | 4) + +#define MT8135_PIN_144_DPIR2__FUNC_GPIO144 (MTK_PIN_NO(144) | 0) +#define MT8135_PIN_144_DPIR2__FUNC_DPI0_R2 (MTK_PIN_NO(144) | 1) +#define MT8135_PIN_144_DPIR2__FUNC_EINT120 (MTK_PIN_NO(144) | 2) +#define MT8135_PIN_144_DPIR2__FUNC_CM2DAT_2X_6 (MTK_PIN_NO(144) | 4) + +#define MT8135_PIN_145_DPIR4__FUNC_GPIO145 (MTK_PIN_NO(145) | 0) +#define MT8135_PIN_145_DPIR4__FUNC_DPI0_R4 (MTK_PIN_NO(145) | 1) +#define MT8135_PIN_145_DPIR4__FUNC_EINT122 (MTK_PIN_NO(145) | 2) +#define MT8135_PIN_145_DPIR4__FUNC_CM2DAT_2X_8 (MTK_PIN_NO(145) | 4) + +#define MT8135_PIN_146_DPIR5__FUNC_GPIO146 (MTK_PIN_NO(146) | 0) +#define MT8135_PIN_146_DPIR5__FUNC_DPI0_R5 (MTK_PIN_NO(146) | 1) +#define MT8135_PIN_146_DPIR5__FUNC_EINT123 (MTK_PIN_NO(146) | 2) +#define MT8135_PIN_146_DPIR5__FUNC_CM2DAT_2X_9 (MTK_PIN_NO(146) | 4) + +#define MT8135_PIN_147_DPIR6__FUNC_GPIO147 (MTK_PIN_NO(147) | 0) +#define MT8135_PIN_147_DPIR6__FUNC_DPI0_R6 (MTK_PIN_NO(147) | 1) +#define MT8135_PIN_147_DPIR6__FUNC_EINT124 (MTK_PIN_NO(147) | 2) +#define MT8135_PIN_147_DPIR6__FUNC_CM2VSYNC_2X (MTK_PIN_NO(147) | 4) + +#define MT8135_PIN_148_DPIR7__FUNC_GPIO148 (MTK_PIN_NO(148) | 0) +#define MT8135_PIN_148_DPIR7__FUNC_DPI0_R7 (MTK_PIN_NO(148) | 1) +#define MT8135_PIN_148_DPIR7__FUNC_EINT125 (MTK_PIN_NO(148) | 2) +#define MT8135_PIN_148_DPIR7__FUNC_CM2HSYNC_2X (MTK_PIN_NO(148) | 4) + +#define MT8135_PIN_149_TDN3__FUNC_GPIO149 (MTK_PIN_NO(149) | 0) +#define MT8135_PIN_149_TDN3__FUNC_EINT36 (MTK_PIN_NO(149) | 2) + +#define MT8135_PIN_150_TDP3__FUNC_GPIO150 (MTK_PIN_NO(150) | 0) +#define MT8135_PIN_150_TDP3__FUNC_EINT35 (MTK_PIN_NO(150) | 2) + +#define MT8135_PIN_151_TDN2__FUNC_GPIO151 (MTK_PIN_NO(151) | 0) +#define MT8135_PIN_151_TDN2__FUNC_EINT169 (MTK_PIN_NO(151) | 2) + +#define MT8135_PIN_152_TDP2__FUNC_GPIO152 (MTK_PIN_NO(152) | 0) +#define MT8135_PIN_152_TDP2__FUNC_EINT168 (MTK_PIN_NO(152) | 2) + +#define MT8135_PIN_153_TCN__FUNC_GPIO153 (MTK_PIN_NO(153) | 0) +#define MT8135_PIN_153_TCN__FUNC_EINT163 (MTK_PIN_NO(153) | 2) + +#define MT8135_PIN_154_TCP__FUNC_GPIO154 (MTK_PIN_NO(154) | 0) +#define MT8135_PIN_154_TCP__FUNC_EINT162 (MTK_PIN_NO(154) | 2) + +#define MT8135_PIN_155_TDN1__FUNC_GPIO155 (MTK_PIN_NO(155) | 0) +#define MT8135_PIN_155_TDN1__FUNC_EINT167 (MTK_PIN_NO(155) | 2) + +#define MT8135_PIN_156_TDP1__FUNC_GPIO156 (MTK_PIN_NO(156) | 0) +#define MT8135_PIN_156_TDP1__FUNC_EINT166 (MTK_PIN_NO(156) | 2) + +#define MT8135_PIN_157_TDN0__FUNC_GPIO157 (MTK_PIN_NO(157) | 0) +#define MT8135_PIN_157_TDN0__FUNC_EINT165 (MTK_PIN_NO(157) | 2) + +#define MT8135_PIN_158_TDP0__FUNC_GPIO158 (MTK_PIN_NO(158) | 0) +#define MT8135_PIN_158_TDP0__FUNC_EINT164 (MTK_PIN_NO(158) | 2) + +#define MT8135_PIN_159_RDN3__FUNC_GPIO159 (MTK_PIN_NO(159) | 0) +#define MT8135_PIN_159_RDN3__FUNC_EINT18 (MTK_PIN_NO(159) | 2) + +#define MT8135_PIN_160_RDP3__FUNC_GPIO160 (MTK_PIN_NO(160) | 0) +#define MT8135_PIN_160_RDP3__FUNC_EINT30 (MTK_PIN_NO(160) | 2) + +#define MT8135_PIN_161_RDN2__FUNC_GPIO161 (MTK_PIN_NO(161) | 0) +#define MT8135_PIN_161_RDN2__FUNC_EINT31 (MTK_PIN_NO(161) | 2) + +#define MT8135_PIN_162_RDP2__FUNC_GPIO162 (MTK_PIN_NO(162) | 0) +#define MT8135_PIN_162_RDP2__FUNC_EINT32 (MTK_PIN_NO(162) | 2) + +#define MT8135_PIN_163_RCN__FUNC_GPIO163 (MTK_PIN_NO(163) | 0) +#define MT8135_PIN_163_RCN__FUNC_EINT33 (MTK_PIN_NO(163) | 2) + +#define MT8135_PIN_164_RCP__FUNC_GPIO164 (MTK_PIN_NO(164) | 0) +#define MT8135_PIN_164_RCP__FUNC_EINT39 (MTK_PIN_NO(164) | 2) + +#define MT8135_PIN_165_RDN1__FUNC_GPIO165 (MTK_PIN_NO(165) | 0) + +#define MT8135_PIN_166_RDP1__FUNC_GPIO166 (MTK_PIN_NO(166) | 0) + +#define MT8135_PIN_167_RDN0__FUNC_GPIO167 (MTK_PIN_NO(167) | 0) + +#define MT8135_PIN_168_RDP0__FUNC_GPIO168 (MTK_PIN_NO(168) | 0) + +#define MT8135_PIN_169_RDN1_A__FUNC_GPIO169 (MTK_PIN_NO(169) | 0) +#define MT8135_PIN_169_RDN1_A__FUNC_CMDAT6 (MTK_PIN_NO(169) | 1) +#define MT8135_PIN_169_RDN1_A__FUNC_EINT175 (MTK_PIN_NO(169) | 2) + +#define MT8135_PIN_170_RDP1_A__FUNC_GPIO170 (MTK_PIN_NO(170) | 0) +#define MT8135_PIN_170_RDP1_A__FUNC_CMDAT7 (MTK_PIN_NO(170) | 1) +#define MT8135_PIN_170_RDP1_A__FUNC_EINT174 (MTK_PIN_NO(170) | 2) + +#define MT8135_PIN_171_RCN_A__FUNC_GPIO171 (MTK_PIN_NO(171) | 0) +#define MT8135_PIN_171_RCN_A__FUNC_CMDAT8 (MTK_PIN_NO(171) | 1) +#define MT8135_PIN_171_RCN_A__FUNC_EINT171 (MTK_PIN_NO(171) | 2) + +#define MT8135_PIN_172_RCP_A__FUNC_GPIO172 (MTK_PIN_NO(172) | 0) +#define MT8135_PIN_172_RCP_A__FUNC_CMDAT9 (MTK_PIN_NO(172) | 1) +#define MT8135_PIN_172_RCP_A__FUNC_EINT170 (MTK_PIN_NO(172) | 2) + +#define MT8135_PIN_173_RDN0_A__FUNC_GPIO173 (MTK_PIN_NO(173) | 0) +#define MT8135_PIN_173_RDN0_A__FUNC_CMHSYNC (MTK_PIN_NO(173) | 1) +#define MT8135_PIN_173_RDN0_A__FUNC_EINT173 (MTK_PIN_NO(173) | 2) + +#define MT8135_PIN_174_RDP0_A__FUNC_GPIO174 (MTK_PIN_NO(174) | 0) +#define MT8135_PIN_174_RDP0_A__FUNC_CMVSYNC (MTK_PIN_NO(174) | 1) +#define MT8135_PIN_174_RDP0_A__FUNC_EINT172 (MTK_PIN_NO(174) | 2) + +#define MT8135_PIN_175_RDN1_B__FUNC_GPIO175 (MTK_PIN_NO(175) | 0) +#define MT8135_PIN_175_RDN1_B__FUNC_CMDAT2 (MTK_PIN_NO(175) | 1) +#define MT8135_PIN_175_RDN1_B__FUNC_EINT181 (MTK_PIN_NO(175) | 2) +#define MT8135_PIN_175_RDN1_B__FUNC_CMCSD2 (MTK_PIN_NO(175) | 3) + +#define MT8135_PIN_176_RDP1_B__FUNC_GPIO176 (MTK_PIN_NO(176) | 0) +#define MT8135_PIN_176_RDP1_B__FUNC_CMDAT3 (MTK_PIN_NO(176) | 1) +#define MT8135_PIN_176_RDP1_B__FUNC_EINT180 (MTK_PIN_NO(176) | 2) +#define MT8135_PIN_176_RDP1_B__FUNC_CMCSD3 (MTK_PIN_NO(176) | 3) + +#define MT8135_PIN_177_RCN_B__FUNC_GPIO177 (MTK_PIN_NO(177) | 0) +#define MT8135_PIN_177_RCN_B__FUNC_CMDAT4 (MTK_PIN_NO(177) | 1) +#define MT8135_PIN_177_RCN_B__FUNC_EINT177 (MTK_PIN_NO(177) | 2) + +#define MT8135_PIN_178_RCP_B__FUNC_GPIO178 (MTK_PIN_NO(178) | 0) +#define MT8135_PIN_178_RCP_B__FUNC_CMDAT5 (MTK_PIN_NO(178) | 1) +#define MT8135_PIN_178_RCP_B__FUNC_EINT176 (MTK_PIN_NO(178) | 2) + +#define MT8135_PIN_179_RDN0_B__FUNC_GPIO179 (MTK_PIN_NO(179) | 0) +#define MT8135_PIN_179_RDN0_B__FUNC_CMDAT0 (MTK_PIN_NO(179) | 1) +#define MT8135_PIN_179_RDN0_B__FUNC_EINT179 (MTK_PIN_NO(179) | 2) +#define MT8135_PIN_179_RDN0_B__FUNC_CMCSD0 (MTK_PIN_NO(179) | 3) + +#define MT8135_PIN_180_RDP0_B__FUNC_GPIO180 (MTK_PIN_NO(180) | 0) +#define MT8135_PIN_180_RDP0_B__FUNC_CMDAT1 (MTK_PIN_NO(180) | 1) +#define MT8135_PIN_180_RDP0_B__FUNC_EINT178 (MTK_PIN_NO(180) | 2) +#define MT8135_PIN_180_RDP0_B__FUNC_CMCSD1 (MTK_PIN_NO(180) | 3) + +#define MT8135_PIN_181_CMPCLK__FUNC_GPIO181 (MTK_PIN_NO(181) | 0) +#define MT8135_PIN_181_CMPCLK__FUNC_CMPCLK (MTK_PIN_NO(181) | 1) +#define MT8135_PIN_181_CMPCLK__FUNC_EINT182 (MTK_PIN_NO(181) | 2) +#define MT8135_PIN_181_CMPCLK__FUNC_CMCSK (MTK_PIN_NO(181) | 3) +#define MT8135_PIN_181_CMPCLK__FUNC_CM2MCLK_4X (MTK_PIN_NO(181) | 4) +#define MT8135_PIN_181_CMPCLK__FUNC_TS_AUXADC_SEL_3 (MTK_PIN_NO(181) | 5) +#define MT8135_PIN_181_CMPCLK__FUNC_VENC_TEST_CK (MTK_PIN_NO(181) | 6) +#define MT8135_PIN_181_CMPCLK__FUNC_TESTA_OUT27 (MTK_PIN_NO(181) | 7) + +#define MT8135_PIN_182_CMMCLK__FUNC_GPIO182 (MTK_PIN_NO(182) | 0) +#define MT8135_PIN_182_CMMCLK__FUNC_CMMCLK (MTK_PIN_NO(182) | 1) +#define MT8135_PIN_182_CMMCLK__FUNC_EINT183 (MTK_PIN_NO(182) | 2) +#define MT8135_PIN_182_CMMCLK__FUNC_TS_AUXADC_SEL_2 (MTK_PIN_NO(182) | 5) +#define MT8135_PIN_182_CMMCLK__FUNC_TESTA_OUT28 (MTK_PIN_NO(182) | 7) + +#define MT8135_PIN_183_CMRST__FUNC_GPIO183 (MTK_PIN_NO(183) | 0) +#define MT8135_PIN_183_CMRST__FUNC_CMRST (MTK_PIN_NO(183) | 1) +#define MT8135_PIN_183_CMRST__FUNC_EINT185 (MTK_PIN_NO(183) | 2) +#define MT8135_PIN_183_CMRST__FUNC_TS_AUXADC_SEL_1 (MTK_PIN_NO(183) | 5) +#define MT8135_PIN_183_CMRST__FUNC_TESTA_OUT30 (MTK_PIN_NO(183) | 7) + +#define MT8135_PIN_184_CMPDN__FUNC_GPIO184 (MTK_PIN_NO(184) | 0) +#define MT8135_PIN_184_CMPDN__FUNC_CMPDN (MTK_PIN_NO(184) | 1) +#define MT8135_PIN_184_CMPDN__FUNC_EINT184 (MTK_PIN_NO(184) | 2) +#define MT8135_PIN_184_CMPDN__FUNC_TS_AUXADC_SEL_0 (MTK_PIN_NO(184) | 5) +#define MT8135_PIN_184_CMPDN__FUNC_TESTA_OUT29 (MTK_PIN_NO(184) | 7) + +#define MT8135_PIN_185_CMFLASH__FUNC_GPIO185 (MTK_PIN_NO(185) | 0) +#define MT8135_PIN_185_CMFLASH__FUNC_CMFLASH (MTK_PIN_NO(185) | 1) +#define MT8135_PIN_185_CMFLASH__FUNC_EINT186 (MTK_PIN_NO(185) | 2) +#define MT8135_PIN_185_CMFLASH__FUNC_CM2MCLK_3X (MTK_PIN_NO(185) | 3) +#define MT8135_PIN_185_CMFLASH__FUNC_MFG_TEST_CK_1 (MTK_PIN_NO(185) | 6) +#define MT8135_PIN_185_CMFLASH__FUNC_TESTA_OUT31 (MTK_PIN_NO(185) | 7) + +#define MT8135_PIN_186_MRG_I2S_PCM_CLK__FUNC_GPIO186 (MTK_PIN_NO(186) | 0) +#define MT8135_PIN_186_MRG_I2S_PCM_CLK__FUNC_MRG_I2S_P_CLK (MTK_PIN_NO(186) | 1) +#define MT8135_PIN_186_MRG_I2S_PCM_CLK__FUNC_EINT14 (MTK_PIN_NO(186) | 2) +#define MT8135_PIN_186_MRG_I2S_PCM_CLK__FUNC_I2SIN_CK (MTK_PIN_NO(186) | 3) +#define MT8135_PIN_186_MRG_I2S_PCM_CLK__FUNC_PCM0_CK (MTK_PIN_NO(186) | 4) +#define MT8135_PIN_186_MRG_I2S_PCM_CLK__FUNC_DSP2_ICK (MTK_PIN_NO(186) | 5) +#define MT8135_PIN_186_MRG_I2S_PCM_CLK__FUNC_IMG_TEST_CK (MTK_PIN_NO(186) | 6) +#define MT8135_PIN_186_MRG_I2S_PCM_CLK__FUNC_USB_SCL (MTK_PIN_NO(186) | 7) + +#define MT8135_PIN_187_MRG_I2S_PCM_SYNC__FUNC_GPIO187 (MTK_PIN_NO(187) | 0) +#define MT8135_PIN_187_MRG_I2S_PCM_SYNC__FUNC_MRG_I2S_SYNC (MTK_PIN_NO(187) | 1) +#define MT8135_PIN_187_MRG_I2S_PCM_SYNC__FUNC_EINT16 (MTK_PIN_NO(187) | 2) +#define MT8135_PIN_187_MRG_I2S_PCM_SYNC__FUNC_I2SIN_WS (MTK_PIN_NO(187) | 3) +#define MT8135_PIN_187_MRG_I2S_PCM_SYNC__FUNC_PCM0_WS (MTK_PIN_NO(187) | 4) +#define MT8135_PIN_187_MRG_I2S_PCM_SYNC__FUNC_DISP_TEST_CK (MTK_PIN_NO(187) | 6) + +#define MT8135_PIN_188_MRG_I2S_PCM_RX__FUNC_GPIO188 (MTK_PIN_NO(188) | 0) +#define MT8135_PIN_188_MRG_I2S_PCM_RX__FUNC_MRG_I2S_PCM_RX (MTK_PIN_NO(188) | 1) +#define MT8135_PIN_188_MRG_I2S_PCM_RX__FUNC_EINT15 (MTK_PIN_NO(188) | 2) +#define MT8135_PIN_188_MRG_I2S_PCM_RX__FUNC_I2SIN_DAT (MTK_PIN_NO(188) | 3) +#define MT8135_PIN_188_MRG_I2S_PCM_RX__FUNC_PCM0_DI (MTK_PIN_NO(188) | 4) +#define MT8135_PIN_188_MRG_I2S_PCM_RX__FUNC_DSP2_ID (MTK_PIN_NO(188) | 5) +#define MT8135_PIN_188_MRG_I2S_PCM_RX__FUNC_MFG_TEST_CK (MTK_PIN_NO(188) | 6) +#define MT8135_PIN_188_MRG_I2S_PCM_RX__FUNC_USB_SDA (MTK_PIN_NO(188) | 7) + +#define MT8135_PIN_189_MRG_I2S_PCM_TX__FUNC_GPIO189 (MTK_PIN_NO(189) | 0) +#define MT8135_PIN_189_MRG_I2S_PCM_TX__FUNC_MRG_I2S_PCM_TX (MTK_PIN_NO(189) | 1) +#define MT8135_PIN_189_MRG_I2S_PCM_TX__FUNC_EINT17 (MTK_PIN_NO(189) | 2) +#define MT8135_PIN_189_MRG_I2S_PCM_TX__FUNC_I2SOUT_DAT (MTK_PIN_NO(189) | 3) +#define MT8135_PIN_189_MRG_I2S_PCM_TX__FUNC_PCM0_DO (MTK_PIN_NO(189) | 4) +#define MT8135_PIN_189_MRG_I2S_PCM_TX__FUNC_VDEC_TEST_CK (MTK_PIN_NO(189) | 6) + +#define MT8135_PIN_190_SRCLKENAI__FUNC_GPIO190 (MTK_PIN_NO(190) | 0) +#define MT8135_PIN_190_SRCLKENAI__FUNC_SRCLKENAI (MTK_PIN_NO(190) | 1) + +#define MT8135_PIN_191_URXD3__FUNC_GPIO191 (MTK_PIN_NO(191) | 0) +#define MT8135_PIN_191_URXD3__FUNC_URXD3 (MTK_PIN_NO(191) | 1) +#define MT8135_PIN_191_URXD3__FUNC_EINT87 (MTK_PIN_NO(191) | 2) +#define MT8135_PIN_191_URXD3__FUNC_UTXD3 (MTK_PIN_NO(191) | 3) +#define MT8135_PIN_191_URXD3__FUNC_TS_AUX_ST (MTK_PIN_NO(191) | 5) +#define MT8135_PIN_191_URXD3__FUNC_PWM4 (MTK_PIN_NO(191) | 6) + +#define MT8135_PIN_192_UTXD3__FUNC_GPIO192 (MTK_PIN_NO(192) | 0) +#define MT8135_PIN_192_UTXD3__FUNC_UTXD3 (MTK_PIN_NO(192) | 1) +#define MT8135_PIN_192_UTXD3__FUNC_EINT86 (MTK_PIN_NO(192) | 2) +#define MT8135_PIN_192_UTXD3__FUNC_URXD3 (MTK_PIN_NO(192) | 3) +#define MT8135_PIN_192_UTXD3__FUNC_TS_AUX_CS_B (MTK_PIN_NO(192) | 5) +#define MT8135_PIN_192_UTXD3__FUNC_PWM3 (MTK_PIN_NO(192) | 6) + +#define MT8135_PIN_193_SDA2__FUNC_GPIO193 (MTK_PIN_NO(193) | 0) +#define MT8135_PIN_193_SDA2__FUNC_SDA2 (MTK_PIN_NO(193) | 1) +#define MT8135_PIN_193_SDA2__FUNC_EINT95 (MTK_PIN_NO(193) | 2) +#define MT8135_PIN_193_SDA2__FUNC_CLKM5 (MTK_PIN_NO(193) | 3) +#define MT8135_PIN_193_SDA2__FUNC_PWM5 (MTK_PIN_NO(193) | 4) +#define MT8135_PIN_193_SDA2__FUNC_TS_AUX_PWDB (MTK_PIN_NO(193) | 5) + +#define MT8135_PIN_194_SCL2__FUNC_GPIO194 (MTK_PIN_NO(194) | 0) +#define MT8135_PIN_194_SCL2__FUNC_SCL2 (MTK_PIN_NO(194) | 1) +#define MT8135_PIN_194_SCL2__FUNC_EINT94 (MTK_PIN_NO(194) | 2) +#define MT8135_PIN_194_SCL2__FUNC_CLKM4 (MTK_PIN_NO(194) | 3) +#define MT8135_PIN_194_SCL2__FUNC_PWM4 (MTK_PIN_NO(194) | 4) +#define MT8135_PIN_194_SCL2__FUNC_TS_AUXADC_TEST_CK (MTK_PIN_NO(194) | 5) + +#define MT8135_PIN_195_SDA1__FUNC_GPIO195 (MTK_PIN_NO(195) | 0) +#define MT8135_PIN_195_SDA1__FUNC_SDA1 (MTK_PIN_NO(195) | 1) +#define MT8135_PIN_195_SDA1__FUNC_EINT93 (MTK_PIN_NO(195) | 2) +#define MT8135_PIN_195_SDA1__FUNC_CLKM3 (MTK_PIN_NO(195) | 3) +#define MT8135_PIN_195_SDA1__FUNC_PWM3 (MTK_PIN_NO(195) | 4) +#define MT8135_PIN_195_SDA1__FUNC_TS_AUX_SCLK_PWDB (MTK_PIN_NO(195) | 5) + +#define MT8135_PIN_196_SCL1__FUNC_GPIO196 (MTK_PIN_NO(196) | 0) +#define MT8135_PIN_196_SCL1__FUNC_SCL1 (MTK_PIN_NO(196) | 1) +#define MT8135_PIN_196_SCL1__FUNC_EINT92 (MTK_PIN_NO(196) | 2) +#define MT8135_PIN_196_SCL1__FUNC_CLKM2 (MTK_PIN_NO(196) | 3) +#define MT8135_PIN_196_SCL1__FUNC_PWM2 (MTK_PIN_NO(196) | 4) +#define MT8135_PIN_196_SCL1__FUNC_TS_AUX_DIN (MTK_PIN_NO(196) | 5) + +#define MT8135_PIN_197_MSDC3_DAT2__FUNC_GPIO197 (MTK_PIN_NO(197) | 0) +#define MT8135_PIN_197_MSDC3_DAT2__FUNC_MSDC3_DAT2 (MTK_PIN_NO(197) | 1) +#define MT8135_PIN_197_MSDC3_DAT2__FUNC_EINT71 (MTK_PIN_NO(197) | 2) +#define MT8135_PIN_197_MSDC3_DAT2__FUNC_SCL6 (MTK_PIN_NO(197) | 3) +#define MT8135_PIN_197_MSDC3_DAT2__FUNC_PWM5 (MTK_PIN_NO(197) | 4) +#define MT8135_PIN_197_MSDC3_DAT2__FUNC_CLKM4 (MTK_PIN_NO(197) | 5) +#define MT8135_PIN_197_MSDC3_DAT2__FUNC_MFG_TEST_CK_2 (MTK_PIN_NO(197) | 6) + +#define MT8135_PIN_198_MSDC3_DAT3__FUNC_GPIO198 (MTK_PIN_NO(198) | 0) +#define MT8135_PIN_198_MSDC3_DAT3__FUNC_MSDC3_DAT3 (MTK_PIN_NO(198) | 1) +#define MT8135_PIN_198_MSDC3_DAT3__FUNC_EINT72 (MTK_PIN_NO(198) | 2) +#define MT8135_PIN_198_MSDC3_DAT3__FUNC_SDA6 (MTK_PIN_NO(198) | 3) +#define MT8135_PIN_198_MSDC3_DAT3__FUNC_PWM6 (MTK_PIN_NO(198) | 4) +#define MT8135_PIN_198_MSDC3_DAT3__FUNC_CLKM5 (MTK_PIN_NO(198) | 5) +#define MT8135_PIN_198_MSDC3_DAT3__FUNC_MFG_TEST_CK_3 (MTK_PIN_NO(198) | 6) + +#define MT8135_PIN_199_MSDC3_CMD__FUNC_GPIO199 (MTK_PIN_NO(199) | 0) +#define MT8135_PIN_199_MSDC3_CMD__FUNC_MSDC3_CMD (MTK_PIN_NO(199) | 1) +#define MT8135_PIN_199_MSDC3_CMD__FUNC_EINT68 (MTK_PIN_NO(199) | 2) +#define MT8135_PIN_199_MSDC3_CMD__FUNC_SDA2 (MTK_PIN_NO(199) | 3) +#define MT8135_PIN_199_MSDC3_CMD__FUNC_PWM2 (MTK_PIN_NO(199) | 4) +#define MT8135_PIN_199_MSDC3_CMD__FUNC_CLKM1 (MTK_PIN_NO(199) | 5) +#define MT8135_PIN_199_MSDC3_CMD__FUNC_MFG_TEST_CK_4 (MTK_PIN_NO(199) | 6) + +#define MT8135_PIN_200_MSDC3_CLK__FUNC_GPIO200 (MTK_PIN_NO(200) | 0) +#define MT8135_PIN_200_MSDC3_CLK__FUNC_MSDC3_CLK (MTK_PIN_NO(200) | 1) +#define MT8135_PIN_200_MSDC3_CLK__FUNC_EINT67 (MTK_PIN_NO(200) | 2) +#define MT8135_PIN_200_MSDC3_CLK__FUNC_SCL2 (MTK_PIN_NO(200) | 3) +#define MT8135_PIN_200_MSDC3_CLK__FUNC_PWM1 (MTK_PIN_NO(200) | 4) +#define MT8135_PIN_200_MSDC3_CLK__FUNC_CLKM0 (MTK_PIN_NO(200) | 5) + +#define MT8135_PIN_201_MSDC3_DAT1__FUNC_GPIO201 (MTK_PIN_NO(201) | 0) +#define MT8135_PIN_201_MSDC3_DAT1__FUNC_MSDC3_DAT1 (MTK_PIN_NO(201) | 1) +#define MT8135_PIN_201_MSDC3_DAT1__FUNC_EINT70 (MTK_PIN_NO(201) | 2) +#define MT8135_PIN_201_MSDC3_DAT1__FUNC_SDA3 (MTK_PIN_NO(201) | 3) +#define MT8135_PIN_201_MSDC3_DAT1__FUNC_PWM4 (MTK_PIN_NO(201) | 4) +#define MT8135_PIN_201_MSDC3_DAT1__FUNC_CLKM3 (MTK_PIN_NO(201) | 5) + +#define MT8135_PIN_202_MSDC3_DAT0__FUNC_GPIO202 (MTK_PIN_NO(202) | 0) +#define MT8135_PIN_202_MSDC3_DAT0__FUNC_MSDC3_DAT0 (MTK_PIN_NO(202) | 1) +#define MT8135_PIN_202_MSDC3_DAT0__FUNC_EINT69 (MTK_PIN_NO(202) | 2) +#define MT8135_PIN_202_MSDC3_DAT0__FUNC_SCL3 (MTK_PIN_NO(202) | 3) +#define MT8135_PIN_202_MSDC3_DAT0__FUNC_PWM3 (MTK_PIN_NO(202) | 4) +#define MT8135_PIN_202_MSDC3_DAT0__FUNC_CLKM2 (MTK_PIN_NO(202) | 5) + +#endif /* __DTS_MT8135_PINFUNC_H */ diff --git a/arch/arm/boot/dts/mt8135.dtsi b/arch/arm/boot/dts/mt8135.dtsi index a161e99ff..0aba9eb28 100644 --- a/arch/arm/boot/dts/mt8135.dtsi +++ b/arch/arm/boot/dts/mt8135.dtsi @@ -15,6 +15,7 @@ #include <dt-bindings/interrupt-controller/irq.h> #include <dt-bindings/interrupt-controller/arm-gic.h> #include "skeleton64.dtsi" +#include "mt8135-pinfunc.h" / { compatible = "mediatek,mt8135"; @@ -101,6 +102,29 @@ compatible = "simple-bus"; ranges; + /* + * Pinctrl access register at 0x10005000 and 0x1020c000 through + * regmap. Register 0x1000b000 is used by EINT. + */ + pio: pinctrl@10005000 { + compatible = "mediatek,mt8135-pinctrl"; + reg = <0 0x1000b000 0 0x1000>; + mediatek,pctl-regmap = <&syscfg_pctl_a &syscfg_pctl_b>; + pins-are-numbered; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>; + }; + + syscfg_pctl_a: syscfg_pctl_a@10005000 { + compatible = "mediatek,mt8135-pctl-a-syscfg", "syscon"; + reg = <0 0x10005000 0 0x1000>; + }; + timer: timer@10008000 { compatible = "mediatek,mt8135-timer", "mediatek,mt6577-timer"; @@ -119,6 +143,11 @@ reg = <0 0x10200030 0 0x1c>; }; + syscfg_pctl_b: syscfg_pctl_b@1020c000 { + compatible = "mediatek,mt8135-pctl-b-syscfg", "syscon"; + reg = <0 0x1020c000 0 0x1000>; + }; + gic: interrupt-controller@10211000 { compatible = "arm,cortex-a15-gic"; interrupt-controller; diff --git a/arch/arm/boot/dts/omap2430.dtsi b/arch/arm/boot/dts/omap2430.dtsi index 11a7963be..2390f387c 100644 --- a/arch/arm/boot/dts/omap2430.dtsi +++ b/arch/arm/boot/dts/omap2430.dtsi @@ -51,7 +51,8 @@ }; scm_conf: scm_conf@270 { - compatible = "syscon"; + compatible = "syscon", + "simple-bus"; reg = <0x270 0x240>; #address-cells = <1>; #size-cells = <1>; diff --git a/arch/arm/boot/dts/omap3-cm-t3517.dts b/arch/arm/boot/dts/omap3-cm-t3517.dts index f5b5a1d96..53ae04f91 100644 --- a/arch/arm/boot/dts/omap3-cm-t3517.dts +++ b/arch/arm/boot/dts/omap3-cm-t3517.dts @@ -66,7 +66,7 @@ otg_drv_vbus: pinmux_otg_drv_vbus { pinctrl-single,pins = < - OMAP3_CORE1_IOPAD(0x2210, PIN_INPUT_PULLDOWN | MUX_MODE0) /* rmii_50Mhz_clk.usb0_drvvbus */ + OMAP3_CORE1_IOPAD(0x2210, PIN_INPUT_PULLDOWN | MUX_MODE0) /* rmii_50MHz_clk.usb0_drvvbus */ >; }; diff --git a/arch/arm/boot/dts/omap3-devkit8000.dts b/arch/arm/boot/dts/omap3-devkit8000.dts index 921de6605..be2297116 100644 --- a/arch/arm/boot/dts/omap3-devkit8000.dts +++ b/arch/arm/boot/dts/omap3-devkit8000.dts @@ -157,3 +157,44 @@ }; }; }; + +&gpmc { + ranges = <6 0 0x2c000000 0x1000000>; /* CS6: 16MB for DM9000 */ + + ethernet@0,0 { + compatible = "davicom,dm9000"; + reg = <6 0x000 2 + 6 0x400 2>; /* CS6, offset 0 and 0x400, IO size 2 */ + bank-width = <2>; + interrupt-parent = <&gpio1>; + interrupts = <25 IRQ_TYPE_LEVEL_LOW>; + davicom,no-eeprom; + + gpmc,mux-add-data = <0>; + gpmc,device-width = <1>; + gpmc,wait-pin = <0>; + gpmc,cycle2cycle-samecsen = <1>; + gpmc,cycle2cycle-diffcsen = <1>; + + gpmc,cs-on-ns = <6>; + gpmc,cs-rd-off-ns = <180>; + gpmc,cs-wr-off-ns = <180>; + gpmc,adv-on-ns = <0>; + gpmc,adv-rd-off-ns = <18>; + gpmc,adv-wr-off-ns = <48>; + gpmc,oe-on-ns = <54>; + gpmc,oe-off-ns = <168>; + gpmc,we-on-ns = <54>; + gpmc,we-off-ns = <168>; + gpmc,rd-cycle-ns = <186>; + gpmc,wr-cycle-ns = <186>; + gpmc,access-ns = <144>; + gpmc,page-burst-access-ns = <24>; + gpmc,bus-turnaround-ns = <90>; + gpmc,cycle2cycle-delay-ns = <90>; + gpmc,wait-monitoring-ns = <0>; + gpmc,clk-activation-ns = <0>; + gpmc,wr-data-mux-bus-ns = <0>; + gpmc,wr-access-ns = <0>; + }; +}; diff --git a/arch/arm/boot/dts/omap3-evm-common.dtsi b/arch/arm/boot/dts/omap3-evm-common.dtsi index 346552b94..b2589f96d 100644 --- a/arch/arm/boot/dts/omap3-evm-common.dtsi +++ b/arch/arm/boot/dts/omap3-evm-common.dtsi @@ -96,6 +96,7 @@ }; &mmc1 { + interrupts-extended = <&intc 83 &omap3_pmx_core 0x11a>; vmmc-supply = <&vmmc1>; vmmc_aux-supply = <&vsim>; bus-width = <8>; diff --git a/arch/arm/boot/dts/omap3-gta04.dtsi b/arch/arm/boot/dts/omap3-gta04.dtsi index b9f68817b..7166d8876 100644 --- a/arch/arm/boot/dts/omap3-gta04.dtsi +++ b/arch/arm/boot/dts/omap3-gta04.dtsi @@ -48,6 +48,28 @@ ti,mcbsp = <&mcbsp2>; }; + /* GSM audio */ + sound_telephony { + compatible = "simple-audio-card"; + simple-audio-card,name = "GTA04 voice"; + simple-audio-card,bitclock-master = <&telephony_link_master>; + simple-audio-card,frame-master = <&telephony_link_master>; + simple-audio-card,format = "i2s"; + + simple-audio-card,cpu { + sound-dai = <&mcbsp4>; + }; + + telephony_link_master: simple-audio-card,codec { + sound-dai = <>m601_codec>; + }; + }; + + gtm601_codec: gsm_codec { + compatible = "option,gtm601"; + #sound-dai-cells = <0>; + }; + spi_lcd { compatible = "spi-gpio"; #address-cells = <0x1>; @@ -200,6 +222,12 @@ OMAP3_CORE1_IOPAD(0x210a, PIN_OUTPUT | MUX_MODE0) /* dss_data23.dss_data23 */ >; }; + + hdq_pins: hdq_pins { + pinctrl-single,pins = < + OMAP3_CORE1_IOPAD(0x21c6, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c3_sda.hdq */ + >; + }; }; &omap3_pmx_core2 { @@ -517,3 +545,12 @@ &mcbsp2 { status = "okay"; }; + +&hdqw1w { + pinctrl-names = "default"; + pinctrl-0 = <&hdq_pins>; +}; + +&mcbsp4 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/omap3-ldp.dts b/arch/arm/boot/dts/omap3-ldp.dts index b699bc48f..bd6e6769c 100644 --- a/arch/arm/boot/dts/omap3-ldp.dts +++ b/arch/arm/boot/dts/omap3-ldp.dts @@ -34,63 +34,63 @@ key_enter { label = "enter"; gpios = <&gpio4 5 GPIO_ACTIVE_LOW>; /* gpio101 */ - linux,code = <0x0107001c>; /* KEY_ENTER */ + linux,code = <KEY_ENTER>; gpio-key,wakeup; }; key_f1 { label = "f1"; gpios = <&gpio4 6 GPIO_ACTIVE_LOW>; /* gpio102 */ - linux,code = <0x0303003b>; /* KEY_F1 */ + linux,code = <KEY_F1>; gpio-key,wakeup; }; key_f2 { label = "f2"; gpios = <&gpio4 7 GPIO_ACTIVE_LOW>; /* gpio103 */ - linux,code = <0x0403003c>; /* KEY_F2 */ + linux,code = <KEY_F2>; gpio-key,wakeup; }; key_f3 { label = "f3"; gpios = <&gpio4 8 GPIO_ACTIVE_LOW>; /* gpio104 */ - linux,code = <0x0503003d>; /* KEY_F3 */ + linux,code = <KEY_F3>; gpio-key,wakeup; }; key_f4 { label = "f4"; gpios = <&gpio4 9 GPIO_ACTIVE_LOW>; /* gpio105 */ - linux,code = <0x0704003e>; /* KEY_F4 */ + linux,code = <KEY_F4>; gpio-key,wakeup; }; key_left { label = "left"; gpios = <&gpio4 10 GPIO_ACTIVE_LOW>; /* gpio106 */ - linux,code = <0x04070069>; /* KEY_LEFT */ + linux,code = <KEY_LEFT>; gpio-key,wakeup; }; key_right { label = "right"; gpios = <&gpio4 11 GPIO_ACTIVE_LOW>; /* gpio107 */ - linux,code = <0x0507006a>; /* KEY_RIGHT */ + linux,code = <KEY_RIGHT>; gpio-key,wakeup; }; key_up { label = "up"; gpios = <&gpio4 12 GPIO_ACTIVE_LOW>; /* gpio108 */ - linux,code = <0x06070067>; /* KEY_UP */ + linux,code = <KEY_UP>; gpio-key,wakeup; }; key_down { label = "down"; gpios = <&gpio4 13 GPIO_ACTIVE_LOW>; /* gpio109 */ - linux,code = <0x0707006c>; /* KEY_DOWN */ + linux,code = <KEY_DOWN>; gpio-key,wakeup; }; }; diff --git a/arch/arm/boot/dts/omap3-overo-common-lcd35.dtsi b/arch/arm/boot/dts/omap3-overo-common-lcd35.dtsi index 233c69e50..df8908adb 100644 --- a/arch/arm/boot/dts/omap3-overo-common-lcd35.dtsi +++ b/arch/arm/boot/dts/omap3-overo-common-lcd35.dtsi @@ -120,7 +120,7 @@ lcd0: display@0 { compatible = "lgphilips,lb035q02"; - label = "lcd"; + label = "lcd35"; reg = <1>; /* CS1 */ spi-max-frequency = <10000000>; diff --git a/arch/arm/boot/dts/omap3-overo-common-lcd43.dtsi b/arch/arm/boot/dts/omap3-overo-common-lcd43.dtsi index f5395b7da..048fd2169 100644 --- a/arch/arm/boot/dts/omap3-overo-common-lcd43.dtsi +++ b/arch/arm/boot/dts/omap3-overo-common-lcd43.dtsi @@ -98,7 +98,7 @@ lcd0: display@0 { compatible = "samsung,lte430wq-f0c", "panel-dpi"; - label = "lcd"; + label = "lcd43"; pinctrl-names = "default"; pinctrl-0 = <<e430_pins>; diff --git a/arch/arm/boot/dts/omap4.dtsi b/arch/arm/boot/dts/omap4.dtsi index f884d6adb..abc4473e6 100644 --- a/arch/arm/boot/dts/omap4.dtsi +++ b/arch/arm/boot/dts/omap4.dtsi @@ -191,7 +191,8 @@ }; omap4_padconf_global: omap4_padconf_global@5a0 { - compatible = "syscon"; + compatible = "syscon", + "simple-bus"; reg = <0x5a0 0x170>; #address-cells = <1>; #size-cells = <1>; @@ -551,6 +552,7 @@ reg = <0x4a066000 0x100>; interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>; ti,hwmods = "mmu_dsp"; + #iommu-cells = <0>; }; mmu_ipu: mmu@55082000 { @@ -558,6 +560,7 @@ reg = <0x55082000 0x100>; interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>; ti,hwmods = "mmu_ipu"; + #iommu-cells = <0>; ti,iommu-bus-err-back; }; diff --git a/arch/arm/boot/dts/omap5-uevm.dts b/arch/arm/boot/dts/omap5-uevm.dts index 74777a6e2..275618f19 100644 --- a/arch/arm/boot/dts/omap5-uevm.dts +++ b/arch/arm/boot/dts/omap5-uevm.dts @@ -597,18 +597,20 @@ }; &uart1 { - pinctrl-names = "default"; - pinctrl-0 = <&uart1_pins>; + pinctrl-names = "default"; + pinctrl-0 = <&uart1_pins>; }; &uart3 { - pinctrl-names = "default"; - pinctrl-0 = <&uart3_pins>; + pinctrl-names = "default"; + pinctrl-0 = <&uart3_pins>; + interrupts-extended = <&wakeupgen GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>, + <&omap5_pmx_core 0x19c>; }; &uart5 { - pinctrl-names = "default"; - pinctrl-0 = <&uart5_pins>; + pinctrl-names = "default"; + pinctrl-0 = <&uart5_pins>; }; &cpu0 { diff --git a/arch/arm/boot/dts/omap5.dtsi b/arch/arm/boot/dts/omap5.dtsi index 7d24ae030..b1a1263e6 100644 --- a/arch/arm/boot/dts/omap5.dtsi +++ b/arch/arm/boot/dts/omap5.dtsi @@ -180,7 +180,8 @@ }; omap5_padconf_global: omap5_padconf_global@5a0 { - compatible = "syscon"; + compatible = "syscon", + "simple-bus"; reg = <0x5a0 0xec>; #address-cells = <1>; #size-cells = <1>; @@ -612,6 +613,7 @@ reg = <0x4a066000 0x100>; interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>; ti,hwmods = "mmu_dsp"; + #iommu-cells = <0>; }; mmu_ipu: mmu@55082000 { @@ -619,6 +621,7 @@ reg = <0x55082000 0x100>; interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>; ti,hwmods = "mmu_ipu"; + #iommu-cells = <0>; ti,iommu-bus-err-back; }; diff --git a/arch/arm/boot/dts/pxa27x.dtsi b/arch/arm/boot/dts/pxa27x.dtsi index 80fc5d7e9..90b99714a 100644 --- a/arch/arm/boot/dts/pxa27x.dtsi +++ b/arch/arm/boot/dts/pxa27x.dtsi @@ -1,6 +1,6 @@ /* The pxa3xx skeleton simply augments the 2xx version */ #include "pxa2xx.dtsi" -#include "dt-bindings/clock/pxa2xx-clock.h" +#include "dt-bindings/clock/pxa-clock.h" / { model = "Marvell PXA27x familiy SoC"; @@ -12,28 +12,61 @@ marvell,intc-nr-irqs = <34>; }; + gpio: gpio@40e00000 { + compatible = "intel,pxa27x-gpio"; + clocks = <&clks CLK_NONE>; + }; + pwm0: pwm@40b00000 { compatible = "marvell,pxa270-pwm", "marvell,pxa250-pwm"; reg = <0x40b00000 0x10>; #pwm-cells = <1>; + clocks = <&clks CLK_PWM0>; }; pwm1: pwm@40b00010 { compatible = "marvell,pxa270-pwm", "marvell,pxa250-pwm"; reg = <0x40b00010 0x10>; #pwm-cells = <1>; + clocks = <&clks CLK_PWM1>; }; pwm2: pwm@40c00000 { compatible = "marvell,pxa270-pwm", "marvell,pxa250-pwm"; reg = <0x40c00000 0x10>; #pwm-cells = <1>; + clocks = <&clks CLK_PWM0>; }; pwm3: pwm@40c00010 { compatible = "marvell,pxa270-pwm", "marvell,pxa250-pwm"; reg = <0x40c00010 0x10>; #pwm-cells = <1>; + clocks = <&clks CLK_PWM1>; + }; + + pwri2c: i2c@40f000180 { + compatible = "mrvl,pxa-i2c"; + reg = <0x40f00180 0x24>; + interrupts = <6>; + clocks = <&clks CLK_PWRI2C>; + status = "disabled"; + }; + + pxa27x_udc: udc@40600000 { + compatible = "marvell,pxa270-udc"; + reg = <0x40600000 0x10000>; + interrupts = <11>; + clocks = <&clks CLK_USB>; + status = "disabled"; + }; + + keypad: keypad@41500000 { + compatible = "marvell,pxa27x-keypad"; + reg = <0x41500000 0x4c>; + interrupts = <4>; + clocks = <&clks CLK_KEYPAD>; + status = "disabled"; }; }; @@ -46,11 +79,18 @@ #size-cells = <1>; ranges; - pxa2xx_clks: pxa2xx_clks@41300004 { - compatible = "marvell,pxa-clocks"; + clks: pxa2xx_clks@41300004 { + compatible = "marvell,pxa270-clocks"; #clock-cells = <1>; status = "okay"; }; }; + timer@40a00000 { + compatible = "marvell,pxa-timer"; + reg = <0x40a00000 0x20>; + interrupts = <26>; + clocks = <&clks CLK_OSTIMER>; + status = "okay"; + }; }; diff --git a/arch/arm/boot/dts/pxa2xx.dtsi b/arch/arm/boot/dts/pxa2xx.dtsi index c08f84629..71a0cd738 100644 --- a/arch/arm/boot/dts/pxa2xx.dtsi +++ b/arch/arm/boot/dts/pxa2xx.dtsi @@ -6,7 +6,8 @@ * Licensed under GPLv2 or later. */ -/include/ "skeleton.dtsi" +#include "skeleton.dtsi" +#include "dt-bindings/clock/pxa-clock.h" / { model = "Marvell PXA2xx family SoC"; @@ -79,6 +80,7 @@ compatible = "mrvl,pxa-uart"; reg = <0x40100000 0x30>; interrupts = <22>; + clocks = <&clks CLK_FFUART>; status = "disabled"; }; @@ -86,6 +88,7 @@ compatible = "mrvl,pxa-uart"; reg = <0x40200000 0x30>; interrupts = <21>; + clocks = <&clks CLK_BTUART>; status = "disabled"; }; @@ -93,6 +96,7 @@ compatible = "mrvl,pxa-uart"; reg = <0x40700000 0x30>; interrupts = <20>; + clocks = <&clks CLK_STUART>; status = "disabled"; }; @@ -107,6 +111,7 @@ compatible = "mrvl,pxa-i2c"; reg = <0x40301680 0x30>; interrupts = <18>; + clocks = <&clks CLK_I2C>; #address-cells = <0x1>; #size-cells = <0>; status = "disabled"; diff --git a/arch/arm/boot/dts/pxa3xx.dtsi b/arch/arm/boot/dts/pxa3xx.dtsi index 83bb0eff6..7ad0b1771 100644 --- a/arch/arm/boot/dts/pxa3xx.dtsi +++ b/arch/arm/boot/dts/pxa3xx.dtsi @@ -1,5 +1,5 @@ /* The pxa3xx skeleton simply augments the 2xx version */ -/include/ "pxa2xx.dtsi" +#include "pxa2xx.dtsi" / { model = "Marvell PXA3xx familiy SoC"; @@ -10,6 +10,7 @@ compatible = "mrvl,pwri2c"; reg = <0x40f500c0 0x30>; interrupts = <6>; + clocks = <&clks CLK_PWRI2C>; #address-cells = <0x1>; #size-cells = <0>; status = "disabled"; @@ -19,6 +20,7 @@ compatible = "marvell,pxa3xx-nand"; reg = <0x43100000 90>; interrupts = <45>; + clocks = <&clks CLK_NAND>; #address-cells = <1>; #size-cells = <1>; status = "disabled"; @@ -32,6 +34,7 @@ gpio: gpio@40e00000 { compatible = "intel,pxa3xx-gpio"; reg = <0x40e00000 0x10000>; + clocks = <&clks CLK_GPIO>; interrupt-names = "gpio0", "gpio1", "gpio_mux"; interrupts = <8 9 10>; gpio-controller; @@ -40,4 +43,28 @@ #interrupt-cells = <0x2>; }; }; + + clocks { + /* + * The muxing of external clocks/internal dividers for osc* clock + * sources has been hidden under the carpet by now. + */ + #address-cells = <1>; + #size-cells = <1>; + ranges; + + clks: pxa3xx_clks@41300004 { + compatible = "marvell,pxa300-clocks"; + #clock-cells = <1>; + status = "okay"; + }; + }; + + timer@40a00000 { + compatible = "marvell,pxa-timer"; + reg = <0x40a00000 0x20>; + interrupts = <26>; + clocks = <&clks CLK_OSTIMER>; + status = "okay"; + }; }; diff --git a/arch/arm/boot/dts/qcom-apq8064-cm-qs600.dts b/arch/arm/boot/dts/qcom-apq8064-cm-qs600.dts index 5d75666f7..71512b3ca 100644 --- a/arch/arm/boot/dts/qcom-apq8064-cm-qs600.dts +++ b/arch/arm/boot/dts/qcom-apq8064-cm-qs600.dts @@ -14,6 +14,67 @@ }; }; + rpm@108000 { + regulators { + vin_lvs1_3_6-supply = <&pm8921_s4>; + vin_lvs2-supply = <&pm8921_s1>; + vin_lvs4_5_7-supply = <&pm8921_s4>; + + vdd_l1_l2_l12_l18-supply = <&pm8921_s4>; + vdd_l24-supply = <&pm8921_s1>; + vdd_l25-supply = <&pm8921_s1>; + vdd_l26-supply = <&pm8921_s7>; + vdd_l27-supply = <&pm8921_s7>; + vdd_l28-supply = <&pm8921_s7>; + + + /* Buck SMPS */ + pm8921_s1: s1 { + regulator-always-on; + regulator-min-microvolt = <1225000>; + regulator-max-microvolt = <1225000>; + qcom,switch-mode-frequency = <3200000>; + bias-pull-down; + }; + + pm8921_s3: s3 { + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1400000>; + qcom,switch-mode-frequency = <4800000>; + }; + + pm8921_s4: s4 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + qcom,switch-mode-frequency = <3200000>; + }; + + pm8921_s7: s7 { + regulator-min-microvolt = <1300000>; + regulator-max-microvolt = <1300000>; + qcom,switch-mode-frequency = <3200000>; + }; + + pm8921_l3: l3 { + regulator-min-microvolt = <3050000>; + regulator-max-microvolt = <3300000>; + bias-pull-down; + }; + + pm8921_l4: l4 { + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1800000>; + bias-pull-down; + }; + + pm8921_l23: l23 { + regulator-min-microvolt = <1700000>; + regulator-max-microvolt = <1900000>; + bias-pull-down; + }; + }; + }; + gsbi@12440000 { status = "okay"; qcom,mode = <GSBI_PROT_I2C>; @@ -40,6 +101,45 @@ }; }; + /* OTG */ + usb1_phy: phy@12500000 { + status = "okay"; + vddcx-supply = <&pm8921_s3>; + v3p3-supply = <&pm8921_l3>; + v1p8-supply = <&pm8921_l4>; + }; + + usb3_phy: phy@12520000 { + status = "okay"; + vddcx-supply = <&pm8921_s3>; + v3p3-supply = <&pm8921_l3>; + v1p8-supply = <&pm8921_l23>; + }; + + usb4_phy: phy@12530000 { + status = "okay"; + vddcx-supply = <&pm8921_s3>; + v3p3-supply = <&pm8921_l3>; + v1p8-supply = <&pm8921_l23>; + }; + + gadget1: gadget@12500000 { + status = "ok"; + }; + + /* OTG */ + usb1: usb@12500000 { + status = "ok"; + }; + + usb3: usb@12520000 { + status = "okay"; + }; + + usb4: usb@12530000 { + status = "okay"; + }; + amba { /* eMMC */ sdcc1: sdcc@12400000 { diff --git a/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts b/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts index e641001ca..a7c939ba8 100644 --- a/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts +++ b/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts @@ -5,15 +5,12 @@ model = "Qualcomm APQ8064/IFC6410"; compatible = "qcom,apq8064-ifc6410", "qcom,apq8064"; + aliases { + serial0 = &gsbi7_serial; + }; + soc { pinctrl@800000 { - i2c1_pins: i2c1 { - mux { - pins = "gpio20", "gpio21"; - function = "gsbi1"; - }; - }; - card_detect: card_detect { mux { pins = "gpio26"; @@ -23,6 +20,83 @@ }; }; + rpm@108000 { + regulators { + vin_lvs1_3_6-supply = <&pm8921_s4>; + vin_lvs2-supply = <&pm8921_s1>; + vin_lvs4_5_7-supply = <&pm8921_s4>; + + vdd_l1_l2_l12_l18-supply = <&pm8921_s4>; + vdd_l24-supply = <&pm8921_s1>; + vdd_l25-supply = <&pm8921_s1>; + vdd_l26-supply = <&pm8921_s7>; + vdd_l27-supply = <&pm8921_s7>; + vdd_l28-supply = <&pm8921_s7>; + + + /* Buck SMPS */ + pm8921_s1: s1 { + regulator-always-on; + regulator-min-microvolt = <1225000>; + regulator-max-microvolt = <1225000>; + qcom,switch-mode-frequency = <3200000>; + bias-pull-down; + }; + + pm8921_s3: s3 { + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1400000>; + qcom,switch-mode-frequency = <4800000>; + }; + + pm8921_s4: s4 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + qcom,switch-mode-frequency = <3200000>; + }; + + pm8921_s7: s7 { + regulator-min-microvolt = <1300000>; + regulator-max-microvolt = <1300000>; + qcom,switch-mode-frequency = <3200000>; + }; + + pm8921_l3: l3 { + regulator-min-microvolt = <3050000>; + regulator-max-microvolt = <3300000>; + bias-pull-down; + }; + + pm8921_l4: l4 { + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1800000>; + bias-pull-down; + }; + + pm8921_l6: l6 { + regulator-min-microvolt = <2950000>; + regulator-max-microvolt = <2950000>; + bias-pull-down; + }; + + pm8921_l23: l23 { + regulator-min-microvolt = <1700000>; + regulator-max-microvolt = <1900000>; + bias-pull-down; + }; + }; + }; + + gsbi3: gsbi@16200000 { + status = "okay"; + qcom,mode = <GSBI_PROT_I2C>; + i2c3: i2c@16280000 { + status = "okay"; + pinctrl-0 = <&i2c3_pins>; + pinctrl-names = "default"; + }; + }; + gsbi@12440000 { status = "okay"; qcom,mode = <GSBI_PROT_I2C>; @@ -49,6 +123,54 @@ }; }; + sata_phy0: phy@1b400000 { + status = "okay"; + }; + + sata0: sata@29000000 { + status = "okay"; + target-supply = <&pm8921_s4>; + }; + + /* OTG */ + usb1_phy: phy@12500000 { + status = "okay"; + vddcx-supply = <&pm8921_s3>; + v3p3-supply = <&pm8921_l3>; + v1p8-supply = <&pm8921_l4>; + }; + + usb3_phy: phy@12520000 { + status = "okay"; + vddcx-supply = <&pm8921_s3>; + v3p3-supply = <&pm8921_l3>; + v1p8-supply = <&pm8921_l23>; + }; + + usb4_phy: phy@12530000 { + status = "okay"; + vddcx-supply = <&pm8921_s3>; + v3p3-supply = <&pm8921_l3>; + v1p8-supply = <&pm8921_l23>; + }; + + gadget1: gadget@12500000 { + status = "okay"; + }; + + /* OTG */ + usb1: usb@12500000 { + status = "okay"; + }; + + usb3: usb@12520000 { + status = "okay"; + }; + + usb4: usb@12530000 { + status = "okay"; + }; + amba { /* eMMC */ sdcc1: sdcc@12400000 { diff --git a/arch/arm/boot/dts/qcom-apq8064.dtsi b/arch/arm/boot/dts/qcom-apq8064.dtsi index 6c1511263..df2061ec6 100644 --- a/arch/arm/boot/dts/qcom-apq8064.dtsi +++ b/arch/arm/boot/dts/qcom-apq8064.dtsi @@ -2,6 +2,7 @@ #include "skeleton.dtsi" #include <dt-bindings/clock/qcom,gcc-msm8960.h> +#include <dt-bindings/reset/qcom,gcc-msm8960.h> #include <dt-bindings/clock/qcom,mmcc-msm8960.h> #include <dt-bindings/soc/qcom,gsbi.h> #include <dt-bindings/interrupt-controller/arm-gic.h> @@ -112,6 +113,20 @@ function = "ps_hold"; }; }; + + i2c1_pins: i2c1 { + mux { + pins = "gpio20", "gpio21"; + function = "gsbi1"; + }; + }; + + i2c3_pins: i2c3 { + mux { + pins = "gpio8", "gpio9"; + function = "gsbi3"; + }; + }; }; intc: interrupt-controller@2000000 { @@ -225,6 +240,26 @@ }; }; + gsbi3: gsbi@16200000 { + status = "disabled"; + compatible = "qcom,gsbi-v1.0.0"; + reg = <0x16200000 0x100>; + clocks = <&gcc GSBI3_H_CLK>; + clock-names = "iface"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + i2c3: i2c@16280000 { + compatible = "qcom,i2c-qup-v1.1.1"; + reg = <0x16280000 0x1000>; + interrupts = <GIC_SPI 151 IRQ_TYPE_NONE>; + clocks = <&gcc GSBI3_QUP_CLK>, + <&gcc GSBI3_H_CLK>; + clock-names = "core", "iface"; + }; + }; + gsbi7: gsbi@16600000 { status = "disabled"; compatible = "qcom,gsbi-v1.0.0"; @@ -235,10 +270,9 @@ #address-cells = <1>; #size-cells = <1>; ranges; - syscon-tcsr = <&tcsr>; - serial@16640000 { + gsbi7_serial: serial@16640000 { compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm"; reg = <0x16640000 0x1000>, <0x16600000 0x1000>; @@ -276,6 +310,143 @@ #reset-cells = <1>; }; + l2cc: clock-controller@2011000 { + compatible = "syscon"; + reg = <0x2011000 0x1000>; + }; + + rpm@108000 { + compatible = "qcom,rpm-apq8064"; + reg = <0x108000 0x1000>; + qcom,ipc = <&l2cc 0x8 2>; + + interrupts = <GIC_SPI 19 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 21 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 22 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "ack", "err", "wakeup"; + + regulators { + compatible = "qcom,rpm-pm8921-regulators"; + + pm8921_hdmi_switch: hdmi-switch { + bias-pull-down; + }; + }; + }; + + usb1_phy: phy@12500000 { + compatible = "qcom,usb-otg-ci"; + reg = <0x12500000 0x400>; + interrupts = <GIC_SPI 100 IRQ_TYPE_NONE>; + status = "disabled"; + dr_mode = "host"; + + clocks = <&gcc USB_HS1_XCVR_CLK>, + <&gcc USB_HS1_H_CLK>; + clock-names = "core", "iface"; + + resets = <&gcc USB_HS1_RESET>; + reset-names = "link"; + }; + + usb3_phy: phy@12520000 { + compatible = "qcom,usb-otg-ci"; + reg = <0x12520000 0x400>; + interrupts = <GIC_SPI 188 IRQ_TYPE_NONE>; + status = "disabled"; + dr_mode = "host"; + + clocks = <&gcc USB_HS3_XCVR_CLK>, + <&gcc USB_HS3_H_CLK>; + clock-names = "core", "iface"; + + resets = <&gcc USB_HS3_RESET>; + reset-names = "link"; + }; + + usb4_phy: phy@12530000 { + compatible = "qcom,usb-otg-ci"; + reg = <0x12530000 0x400>; + interrupts = <GIC_SPI 215 IRQ_TYPE_NONE>; + status = "disabled"; + dr_mode = "host"; + + clocks = <&gcc USB_HS4_XCVR_CLK>, + <&gcc USB_HS4_H_CLK>; + clock-names = "core", "iface"; + + resets = <&gcc USB_HS4_RESET>; + reset-names = "link"; + }; + + gadget1: gadget@12500000 { + compatible = "qcom,ci-hdrc"; + reg = <0x12500000 0x400>; + status = "disabled"; + dr_mode = "peripheral"; + interrupts = <GIC_SPI 100 IRQ_TYPE_NONE>; + usb-phy = <&usb1_phy>; + }; + + usb1: usb@12500000 { + compatible = "qcom,ehci-host"; + reg = <0x12500000 0x400>; + interrupts = <GIC_SPI 100 IRQ_TYPE_NONE>; + status = "disabled"; + usb-phy = <&usb1_phy>; + }; + + usb3: usb@12520000 { + compatible = "qcom,ehci-host"; + reg = <0x12520000 0x400>; + interrupts = <GIC_SPI 188 IRQ_TYPE_NONE>; + status = "disabled"; + usb-phy = <&usb3_phy>; + }; + + usb4: usb@12530000 { + compatible = "qcom,ehci-host"; + reg = <0x12530000 0x400>; + interrupts = <GIC_SPI 215 IRQ_TYPE_NONE>; + status = "disabled"; + usb-phy = <&usb4_phy>; + }; + + sata_phy0: phy@1b400000 { + compatible = "qcom,apq8064-sata-phy"; + status = "disabled"; + reg = <0x1b400000 0x200>; + reg-names = "phy_mem"; + clocks = <&gcc SATA_PHY_CFG_CLK>; + clock-names = "cfg"; + #phy-cells = <0>; + }; + + sata0: sata@29000000 { + compatible = "generic-ahci"; + status = "disabled"; + reg = <0x29000000 0x180>; + interrupts = <GIC_SPI 209 IRQ_TYPE_NONE>; + + clocks = <&gcc SFAB_SATA_S_H_CLK>, + <&gcc SATA_H_CLK>, + <&gcc SATA_A_CLK>, + <&gcc SATA_RXOOB_CLK>, + <&gcc SATA_PMALIVE_CLK>; + clock-names = "slave_iface", + "iface", + "bus", + "rxoob", + "core_pmalive"; + + assigned-clocks = <&gcc SATA_RXOOB_CLK>, + <&gcc SATA_PMALIVE_CLK>; + assigned-clock-rates = <100000000>, <100000000>; + + phys = <&sata_phy0>; + phy-names = "sata-phy"; + }; + /* Temporary fixed regulator */ vsdcc_fixed: vsdcc-regulator { compatible = "regulator-fixed"; diff --git a/arch/arm/boot/dts/qcom-msm8660.dtsi b/arch/arm/boot/dts/qcom-msm8660.dtsi index 20bbd19b9..e0b2ce291 100644 --- a/arch/arm/boot/dts/qcom-msm8660.dtsi +++ b/arch/arm/boot/dts/qcom-msm8660.dtsi @@ -37,6 +37,11 @@ }; }; + cpu-pmu { + compatible = "qcom,scorpion-mp-pmu"; + interrupts = <1 9 0x304>; + }; + soc: soc { #address-cells = <1>; #size-cells = <1>; diff --git a/arch/arm/boot/dts/qcom-pm8841.dtsi b/arch/arm/boot/dts/qcom-pm8841.dtsi index 73813cc11..8f1a0b162 100644 --- a/arch/arm/boot/dts/qcom-pm8841.dtsi +++ b/arch/arm/boot/dts/qcom-pm8841.dtsi @@ -1,3 +1,4 @@ +#include <dt-bindings/interrupt-controller/irq.h> #include <dt-bindings/spmi/spmi.h> &spmi_bus { @@ -7,6 +8,23 @@ reg = <0x4 SPMI_USID>; #address-cells = <1>; #size-cells = <0>; + + pm8841_mpps: mpps@a000 { + compatible = "qcom,pm8841-mpp"; + reg = <0xa000 0x400>; + gpio-controller; + #gpio-cells = <2>; + interrupts = <4 0xa0 0 IRQ_TYPE_NONE>, + <4 0xa1 0 IRQ_TYPE_NONE>, + <4 0xa2 0 IRQ_TYPE_NONE>, + <4 0xa3 0 IRQ_TYPE_NONE>; + }; + + temp-alarm@2400 { + compatible = "qcom,spmi-temp-alarm"; + reg = <0x2400 0x100>; + interrupts = <4 0x24 0 IRQ_TYPE_EDGE_RISING>; + }; }; usid5: pm8841@5 { diff --git a/arch/arm/boot/dts/qcom-pm8941.dtsi b/arch/arm/boot/dts/qcom-pm8941.dtsi index 24c5088ac..aa774e685 100644 --- a/arch/arm/boot/dts/qcom-pm8941.dtsi +++ b/arch/arm/boot/dts/qcom-pm8941.dtsi @@ -1,3 +1,5 @@ +#include <dt-bindings/iio/qcom,spmi-vadc.h> +#include <dt-bindings/interrupt-controller/irq.h> #include <dt-bindings/spmi/spmi.h> &spmi_bus { @@ -7,12 +9,141 @@ reg = <0x0 SPMI_USID>; #address-cells = <1>; #size-cells = <0>; + + rtc@6000 { + compatible = "qcom,pm8941-rtc"; + reg = <0x6000 0x100>, + <0x6100 0x100>; + reg-names = "rtc", "alarm"; + interrupts = <0x0 0x61 0x1 IRQ_TYPE_EDGE_RISING>; + }; + + pwrkey@800 { + compatible = "qcom,pm8941-pwrkey"; + reg = <0x800 0x100>; + interrupts = <0x0 0x8 0 IRQ_TYPE_EDGE_BOTH>; + debounce = <15625>; + bias-pull-up; + }; + + pm8941_gpios: gpios@c000 { + compatible = "qcom,pm8941-gpio"; + reg = <0xc000 0x2400>; + gpio-controller; + #gpio-cells = <2>; + interrupts = <0 0xc0 0 IRQ_TYPE_NONE>, + <0 0xc1 0 IRQ_TYPE_NONE>, + <0 0xc2 0 IRQ_TYPE_NONE>, + <0 0xc3 0 IRQ_TYPE_NONE>, + <0 0xc4 0 IRQ_TYPE_NONE>, + <0 0xc5 0 IRQ_TYPE_NONE>, + <0 0xc6 0 IRQ_TYPE_NONE>, + <0 0xc7 0 IRQ_TYPE_NONE>, + <0 0xc8 0 IRQ_TYPE_NONE>, + <0 0xc9 0 IRQ_TYPE_NONE>, + <0 0xca 0 IRQ_TYPE_NONE>, + <0 0xcb 0 IRQ_TYPE_NONE>, + <0 0xcc 0 IRQ_TYPE_NONE>, + <0 0xcd 0 IRQ_TYPE_NONE>, + <0 0xce 0 IRQ_TYPE_NONE>, + <0 0xcf 0 IRQ_TYPE_NONE>, + <0 0xd0 0 IRQ_TYPE_NONE>, + <0 0xd1 0 IRQ_TYPE_NONE>, + <0 0xd2 0 IRQ_TYPE_NONE>, + <0 0xd3 0 IRQ_TYPE_NONE>, + <0 0xd4 0 IRQ_TYPE_NONE>, + <0 0xd5 0 IRQ_TYPE_NONE>, + <0 0xd6 0 IRQ_TYPE_NONE>, + <0 0xd7 0 IRQ_TYPE_NONE>, + <0 0xd8 0 IRQ_TYPE_NONE>, + <0 0xd9 0 IRQ_TYPE_NONE>, + <0 0xda 0 IRQ_TYPE_NONE>, + <0 0xdb 0 IRQ_TYPE_NONE>, + <0 0xdc 0 IRQ_TYPE_NONE>, + <0 0xdd 0 IRQ_TYPE_NONE>, + <0 0xde 0 IRQ_TYPE_NONE>, + <0 0xdf 0 IRQ_TYPE_NONE>, + <0 0xe0 0 IRQ_TYPE_NONE>, + <0 0xe1 0 IRQ_TYPE_NONE>, + <0 0xe2 0 IRQ_TYPE_NONE>, + <0 0xe3 0 IRQ_TYPE_NONE>; + }; + + pm8941_mpps: mpps@a000 { + compatible = "qcom,pm8941-mpp"; + reg = <0xa000 0x800>; + gpio-controller; + #gpio-cells = <2>; + interrupts = <0 0xa0 0 IRQ_TYPE_NONE>, + <0 0xa1 0 IRQ_TYPE_NONE>, + <0 0xa2 0 IRQ_TYPE_NONE>, + <0 0xa3 0 IRQ_TYPE_NONE>, + <0 0xa4 0 IRQ_TYPE_NONE>, + <0 0xa5 0 IRQ_TYPE_NONE>, + <0 0xa6 0 IRQ_TYPE_NONE>, + <0 0xa7 0 IRQ_TYPE_NONE>; + }; + + pm8941_temp: temp-alarm@2400 { + compatible = "qcom,spmi-temp-alarm"; + reg = <0x2400 0x100>; + interrupts = <0 0x24 0 IRQ_TYPE_EDGE_RISING>; + io-channels = <&pm8941_vadc VADC_DIE_TEMP>; + io-channel-names = "thermal"; + #thermal-sensor-cells = <0>; + }; + + pm8941_vadc: vadc@3100 { + compatible = "qcom,spmi-vadc"; + reg = <0x3100 0x100>; + interrupts = <0x0 0x31 0x0 IRQ_TYPE_EDGE_RISING>; + #address-cells = <1>; + #size-cells = <0>; + #io-channel-cells = <1>; + + die_temp { + reg = <VADC_DIE_TEMP>; + }; + ref_625mv { + reg = <VADC_REF_625MV>; + }; + ref_1250v { + reg = <VADC_REF_1250MV>; + }; + ref_gnd { + reg = <VADC_GND_REF>; + }; + ref_vdd { + reg = <VADC_VDD_VADC>; + }; + }; + + pm8941_iadc: iadc@3600 { + compatible = "qcom,pm8941-iadc", "qcom,spmi-iadc"; + reg = <0x3600 0x100>, + <0x12f1 0x1>; + interrupts = <0x0 0x36 0x0 IRQ_TYPE_EDGE_RISING>; + qcom,external-resistor-micro-ohms = <10000>; + }; }; usid1: pm8941@1 { - compatible ="qcom,spmi-pmic"; + compatible = "qcom,spmi-pmic"; reg = <0x1 SPMI_USID>; #address-cells = <1>; #size-cells = <0>; + + wled@d800 { + compatible = "qcom,pm8941-wled"; + reg = <0xd800 0x100>; + label = "backlight"; + + qcom,cs-out; + qcom,current-limit = <20>; + qcom,current-boost-limit = <805>; + qcom,switching-freq = <1600>; + qcom,ovp = <29>; + qcom,num-strings = <2>; + }; }; }; diff --git a/arch/arm/boot/dts/qcom-pma8084.dtsi b/arch/arm/boot/dts/qcom-pma8084.dtsi index a5a4fe695..5e240ccc0 100644 --- a/arch/arm/boot/dts/qcom-pma8084.dtsi +++ b/arch/arm/boot/dts/qcom-pma8084.dtsi @@ -1,3 +1,5 @@ +#include <dt-bindings/iio/qcom,spmi-vadc.h> +#include <dt-bindings/interrupt-controller/irq.h> #include <dt-bindings/spmi/spmi.h> &spmi_bus { @@ -7,6 +9,96 @@ reg = <0x0 SPMI_USID>; #address-cells = <1>; #size-cells = <0>; + + rtc@6000 { + compatible = "qcom,pm8941-rtc"; + reg = <0x6000 0x100>, + <0x6100 0x100>; + reg-names = "rtc", "alarm"; + interrupts = <0x0 0x61 0x1 IRQ_TYPE_EDGE_RISING>; + }; + + pma8084_gpios: gpios@c000 { + compatible = "qcom,pma8084-gpio"; + reg = <0xc000 0x1600>; + gpio-controller; + #gpio-cells = <2>; + interrupts = <0 0xc0 0 IRQ_TYPE_NONE>, + <0 0xc1 0 IRQ_TYPE_NONE>, + <0 0xc2 0 IRQ_TYPE_NONE>, + <0 0xc3 0 IRQ_TYPE_NONE>, + <0 0xc4 0 IRQ_TYPE_NONE>, + <0 0xc5 0 IRQ_TYPE_NONE>, + <0 0xc6 0 IRQ_TYPE_NONE>, + <0 0xc7 0 IRQ_TYPE_NONE>, + <0 0xc8 0 IRQ_TYPE_NONE>, + <0 0xc9 0 IRQ_TYPE_NONE>, + <0 0xca 0 IRQ_TYPE_NONE>, + <0 0xcb 0 IRQ_TYPE_NONE>, + <0 0xcc 0 IRQ_TYPE_NONE>, + <0 0xcd 0 IRQ_TYPE_NONE>, + <0 0xce 0 IRQ_TYPE_NONE>, + <0 0xcf 0 IRQ_TYPE_NONE>, + <0 0xd0 0 IRQ_TYPE_NONE>, + <0 0xd1 0 IRQ_TYPE_NONE>, + <0 0xd2 0 IRQ_TYPE_NONE>, + <0 0xd3 0 IRQ_TYPE_NONE>, + <0 0xd4 0 IRQ_TYPE_NONE>, + <0 0xd5 0 IRQ_TYPE_NONE>; + }; + + pma8084_mpps: mpps@a000 { + compatible = "qcom,pma8084-mpp"; + reg = <0xa000 0x800>; + gpio-controller; + #gpio-cells = <2>; + interrupts = <0 0xa0 0 IRQ_TYPE_NONE>, + <0 0xa1 0 IRQ_TYPE_NONE>, + <0 0xa2 0 IRQ_TYPE_NONE>, + <0 0xa3 0 IRQ_TYPE_NONE>, + <0 0xa4 0 IRQ_TYPE_NONE>, + <0 0xa5 0 IRQ_TYPE_NONE>, + <0 0xa6 0 IRQ_TYPE_NONE>, + <0 0xa7 0 IRQ_TYPE_NONE>; + }; + + pma8084_temp: temp-alarm@2400 { + compatible = "qcom,spmi-temp-alarm"; + reg = <0x2400 0x100>; + interrupts = <0 0x24 0 IRQ_TYPE_EDGE_RISING>; + #thermal-sensor-cells = <0>; + io-channels = <&pma8084_vadc VADC_DIE_TEMP>; + io-channel-names = "thermal"; + }; + + pma8084_vadc: vadc@3100 { + compatible = "qcom,spmi-vadc"; + reg = <0x3100 0x100>; + interrupts = <0x0 0x31 0x0 IRQ_TYPE_EDGE_RISING>; + #address-cells = <1>; + #size-cells = <0>; + #io-channel-cells = <1>; + io-channel-ranges; + + die_temp { + reg = <VADC_DIE_TEMP>; + }; + ref_625mv { + reg = <VADC_REF_625MV>; + }; + ref_1250v { + reg = <VADC_REF_1250MV>; + }; + ref_buf_625mv { + reg = <VADC_SPARE1>; + }; + ref_gnd { + reg = <VADC_GND_REF>; + }; + ref_vdd { + reg = <VADC_VDD_VADC>; + }; + }; }; usid1: pma8084@1 { diff --git a/arch/arm/boot/dts/r8a73a4-ape6evm.dts b/arch/arm/boot/dts/r8a73a4-ape6evm.dts index 81a38ceee..a4c425923 100644 --- a/arch/arm/boot/dts/r8a73a4-ape6evm.dts +++ b/arch/arm/boot/dts/r8a73a4-ape6evm.dts @@ -147,7 +147,7 @@ &i2c5 { status = "okay"; - vdd_dvfs: max8973@1b { + vdd_dvfs: regulator@1b { compatible = "maxim,max8973"; reg = <0x1b>; diff --git a/arch/arm/boot/dts/r8a73a4.dtsi b/arch/arm/boot/dts/r8a73a4.dtsi index 0fd889f88..7ee22a41c 100644 --- a/arch/arm/boot/dts/r8a73a4.dtsi +++ b/arch/arm/boot/dts/r8a73a4.dtsi @@ -163,6 +163,7 @@ <0 29 IRQ_TYPE_LEVEL_HIGH>, <0 30 IRQ_TYPE_LEVEL_HIGH>, <0 31 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp4_clks R8A73A4_CLK_IRQC>; power-domains = <&pd_c4>; }; @@ -197,6 +198,7 @@ <0 55 IRQ_TYPE_LEVEL_HIGH>, <0 56 IRQ_TYPE_LEVEL_HIGH>, <0 57 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp4_clks R8A73A4_CLK_IRQC>; power-domains = <&pd_c4>; }; @@ -724,15 +726,16 @@ mstp4_clks: mstp4_clks@e6150140 { compatible = "renesas,r8a73a4-mstp-clocks", "renesas,cpg-mstp-clocks"; reg = <0 0xe6150140 0 4>, <0 0xe615004c 0 4>; - clocks = <&main_div2_clk>, <&cpg_clocks R8A73A4_CLK_HP>, + clocks = <&main_div2_clk>, <&main_div2_clk>, + <&cpg_clocks R8A73A4_CLK_HP>, <&cpg_clocks R8A73A4_CLK_HP>; #clock-cells = <1>; clock-indices = < - R8A73A4_CLK_IIC5 R8A73A4_CLK_IIC4 - R8A73A4_CLK_IIC3 + R8A73A4_CLK_IRQC R8A73A4_CLK_IIC5 + R8A73A4_CLK_IIC4 R8A73A4_CLK_IIC3 >; clock-output-names = - "iic5", "iic4", "iic3"; + "irqc", "iic5", "iic4", "iic3"; }; mstp5_clks: mstp5_clks@e6150144 { compatible = "renesas,r8a73a4-mstp-clocks", "renesas,cpg-mstp-clocks"; diff --git a/arch/arm/boot/dts/r8a7740-armadillo800eva.dts b/arch/arm/boot/dts/r8a7740-armadillo800eva.dts index 9bd0cb439..2e31d8c01 100644 --- a/arch/arm/boot/dts/r8a7740-armadillo800eva.dts +++ b/arch/arm/boot/dts/r8a7740-armadillo800eva.dts @@ -208,7 +208,7 @@ gpios = <&pfc 166 GPIO_ACTIVE_LOW>; }; - wm8978: wm8978@1a { + wm8978: codec@1a { #sound-dai-cells = <0>; compatible = "wlf,wm8978"; reg = <0x1a>; diff --git a/arch/arm/boot/dts/r8a7740.dtsi b/arch/arm/boot/dts/r8a7740.dtsi index 83c1c3ca1..d84714468 100644 --- a/arch/arm/boot/dts/r8a7740.dtsi +++ b/arch/arm/boot/dts/r8a7740.dtsi @@ -67,7 +67,7 @@ }; /* irqpin0: IRQ0 - IRQ7 */ - irqpin0: irqpin@e6900000 { + irqpin0: interrupt-controller@e6900000 { compatible = "renesas,intc-irqpin-r8a7740", "renesas,intc-irqpin"; #interrupt-cells = <2>; interrupt-controller; @@ -89,7 +89,7 @@ }; /* irqpin1: IRQ8 - IRQ15 */ - irqpin1: irqpin@e6900004 { + irqpin1: interrupt-controller@e6900004 { compatible = "renesas,intc-irqpin-r8a7740", "renesas,intc-irqpin"; #interrupt-cells = <2>; interrupt-controller; @@ -111,7 +111,7 @@ }; /* irqpin2: IRQ16 - IRQ23 */ - irqpin2: irqpin@e6900008 { + irqpin2: interrupt-controller@e6900008 { compatible = "renesas,intc-irqpin-r8a7740", "renesas,intc-irqpin"; #interrupt-cells = <2>; interrupt-controller; @@ -133,7 +133,7 @@ }; /* irqpin3: IRQ24 - IRQ31 */ - irqpin3: irqpin@e690000c { + irqpin3: interrupt-controller@e690000c { compatible = "renesas,intc-irqpin-r8a7740", "renesas,intc-irqpin"; #interrupt-cells = <2>; interrupt-controller; @@ -275,7 +275,7 @@ status = "disabled"; }; - scifb8: serial@e6c30000 { + scifb: serial@e6c30000 { compatible = "renesas,scifb-r8a7740", "renesas,scifb"; reg = <0xe6c30000 0x100>; interrupts = <0 108 IRQ_TYPE_LEVEL_HIGH>; diff --git a/arch/arm/boot/dts/r8a7778-bockw-reference.dts b/arch/arm/boot/dts/r8a7778-bockw-reference.dts index 04c0c37bb..dffa6ff30 100644 --- a/arch/arm/boot/dts/r8a7778-bockw-reference.dts +++ b/arch/arm/boot/dts/r8a7778-bockw-reference.dts @@ -119,7 +119,7 @@ flash: flash@0 { #address-cells = <1>; #size-cells = <1>; - compatible = "spansion,s25fl008k"; + compatible = "spansion,s25fl008k", "jedec,spi-nor"; reg = <0>; spi-max-frequency = <104000000>; m25p,fast-read; diff --git a/arch/arm/boot/dts/r8a7778-bockw.dts b/arch/arm/boot/dts/r8a7778-bockw.dts index 787fa6f9f..90543b12d 100644 --- a/arch/arm/boot/dts/r8a7778-bockw.dts +++ b/arch/arm/boot/dts/r8a7778-bockw.dts @@ -85,7 +85,7 @@ &i2c0 { status = "okay"; - ak4643: sound-codec@12 { + ak4643: codec@12 { compatible = "asahi-kasei,ak4643"; #sound-dai-cells = <0>; reg = <0x12>; @@ -186,7 +186,7 @@ flash: flash@0 { #address-cells = <1>; #size-cells = <1>; - compatible = "spansion,s25fl008k"; + compatible = "spansion,s25fl008k", "jedec,spi-nor"; reg = <0>; spi-max-frequency = <104000000>; m25p,fast-read; diff --git a/arch/arm/boot/dts/r8a7778.dtsi b/arch/arm/boot/dts/r8a7778.dtsi index 868f97309..7ce9f5fd5 100644 --- a/arch/arm/boot/dts/r8a7778.dtsi +++ b/arch/arm/boot/dts/r8a7778.dtsi @@ -68,7 +68,7 @@ }; /* irqpin: IRQ0 - IRQ3 */ - irqpin: irqpin@fe78001c { + irqpin: interrupt-controller@fe78001c { compatible = "renesas,intc-irqpin-r8a7778", "renesas,intc-irqpin"; #interrupt-cells = <2>; interrupt-controller; diff --git a/arch/arm/boot/dts/r8a7779-marzen.dts b/arch/arm/boot/dts/r8a7779-marzen.dts index 540756cdf..20afea6f0 100644 --- a/arch/arm/boot/dts/r8a7779-marzen.dts +++ b/arch/arm/boot/dts/r8a7779-marzen.dts @@ -42,10 +42,10 @@ regulator-always-on; }; - lan0@18000000 { + ethernet@18000000 { compatible = "smsc,lan9220", "smsc,lan9115"; reg = <0x18000000 0x100>; - pinctrl-0 = <&lan0_pins>; + pinctrl-0 = <ðernet_pins>; pinctrl-names = "default"; phy-mode = "mii"; @@ -176,7 +176,7 @@ }; }; - lan0_pins: lan0 { + ethernet_pins: ethernet { intc { renesas,groups = "intc_irq1_b"; renesas,function = "intc"; diff --git a/arch/arm/boot/dts/r8a7779.dtsi b/arch/arm/boot/dts/r8a7779.dtsi index 5c2219b9f..5c8071e87 100644 --- a/arch/arm/boot/dts/r8a7779.dtsi +++ b/arch/arm/boot/dts/r8a7779.dtsi @@ -148,7 +148,7 @@ interrupt-controller; }; - irqpin0: irqpin@fe780010 { + irqpin0: interrupt-controller@fe780010 { compatible = "renesas,intc-irqpin-r8a7779", "renesas,intc-irqpin"; #interrupt-cells = <2>; status = "disabled"; diff --git a/arch/arm/boot/dts/r8a7790-lager.dts b/arch/arm/boot/dts/r8a7790-lager.dts index aaa4f258e..2eb8a995a 100644 --- a/arch/arm/boot/dts/r8a7790-lager.dts +++ b/arch/arm/boot/dts/r8a7790-lager.dts @@ -429,7 +429,7 @@ flash: flash@0 { #address-cells = <1>; #size-cells = <1>; - compatible = "spansion,s25fl512s"; + compatible = "spansion,s25fl512s", "jedec,spi-nor"; reg = <0>; spi-max-frequency = <30000000>; spi-tx-bus-width = <4>; @@ -525,7 +525,7 @@ clock-frequency = <100000>; - ak4643: sound-codec@12 { + ak4643: codec@12 { compatible = "asahi-kasei,ak4643"; #sound-dai-cells = <0>; reg = <0x12>; diff --git a/arch/arm/boot/dts/r8a7790.dtsi b/arch/arm/boot/dts/r8a7790.dtsi index 4bb2f4c17..51ab8865e 100644 --- a/arch/arm/boot/dts/r8a7790.dtsi +++ b/arch/arm/boot/dts/r8a7790.dtsi @@ -252,6 +252,7 @@ <0 1 IRQ_TYPE_LEVEL_HIGH>, <0 2 IRQ_TYPE_LEVEL_HIGH>, <0 3 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp4_clks R8A7790_CLK_IRQC>; }; dmac0: dma-controller@e6700000 { @@ -370,6 +371,28 @@ dma-channels = <13>; }; + usb_dmac0: dma-controller@e65a0000 { + compatible = "renesas,usb-dmac"; + reg = <0 0xe65a0000 0 0x100>; + interrupts = <0 109 IRQ_TYPE_LEVEL_HIGH + 0 109 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "ch0", "ch1"; + clocks = <&mstp3_clks R8A7790_CLK_USBDMAC0>; + #dma-cells = <1>; + dma-channels = <2>; + }; + + usb_dmac1: dma-controller@e65b0000 { + compatible = "renesas,usb-dmac"; + reg = <0 0xe65b0000 0 0x100>; + interrupts = <0 110 IRQ_TYPE_LEVEL_HIGH + 0 110 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "ch0", "ch1"; + clocks = <&mstp3_clks R8A7790_CLK_USBDMAC1>; + #dma-cells = <1>; + dma-channels = <2>; + }; + i2c0: i2c@e6508000 { #address-cells = <1>; #size-cells = <0>; @@ -467,6 +490,7 @@ dma-names = "tx", "rx"; reg-io-width = <4>; status = "disabled"; + max-frequency = <97500000>; }; mmcif1: mmc@ee220000 { @@ -478,6 +502,7 @@ dma-names = "tx", "rx"; reg-io-width = <4>; status = "disabled"; + max-frequency = <97500000>; }; pfc: pfc@e6060000 { @@ -531,6 +556,8 @@ interrupts = <0 144 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp2_clks R8A7790_CLK_SCIFA0>; clock-names = "sci_ick"; + dmas = <&dmac0 0x21>, <&dmac0 0x22>; + dma-names = "tx", "rx"; status = "disabled"; }; @@ -540,6 +567,8 @@ interrupts = <0 145 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp2_clks R8A7790_CLK_SCIFA1>; clock-names = "sci_ick"; + dmas = <&dmac0 0x25>, <&dmac0 0x26>; + dma-names = "tx", "rx"; status = "disabled"; }; @@ -549,6 +578,8 @@ interrupts = <0 151 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp2_clks R8A7790_CLK_SCIFA2>; clock-names = "sci_ick"; + dmas = <&dmac0 0x27>, <&dmac0 0x28>; + dma-names = "tx", "rx"; status = "disabled"; }; @@ -558,6 +589,8 @@ interrupts = <0 148 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp2_clks R8A7790_CLK_SCIFB0>; clock-names = "sci_ick"; + dmas = <&dmac0 0x3d>, <&dmac0 0x3e>; + dma-names = "tx", "rx"; status = "disabled"; }; @@ -567,6 +600,8 @@ interrupts = <0 149 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp2_clks R8A7790_CLK_SCIFB1>; clock-names = "sci_ick"; + dmas = <&dmac0 0x19>, <&dmac0 0x1a>; + dma-names = "tx", "rx"; status = "disabled"; }; @@ -576,6 +611,8 @@ interrupts = <0 150 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp2_clks R8A7790_CLK_SCIFB2>; clock-names = "sci_ick"; + dmas = <&dmac0 0x1d>, <&dmac0 0x1e>; + dma-names = "tx", "rx"; status = "disabled"; }; @@ -585,6 +622,8 @@ interrupts = <0 152 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp7_clks R8A7790_CLK_SCIF0>; clock-names = "sci_ick"; + dmas = <&dmac0 0x29>, <&dmac0 0x2a>; + dma-names = "tx", "rx"; status = "disabled"; }; @@ -594,6 +633,8 @@ interrupts = <0 153 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp7_clks R8A7790_CLK_SCIF1>; clock-names = "sci_ick"; + dmas = <&dmac0 0x2d>, <&dmac0 0x2e>; + dma-names = "tx", "rx"; status = "disabled"; }; @@ -603,6 +644,8 @@ interrupts = <0 154 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp7_clks R8A7790_CLK_HSCIF0>; clock-names = "sci_ick"; + dmas = <&dmac0 0x39>, <&dmac0 0x3a>; + dma-names = "tx", "rx"; status = "disabled"; }; @@ -612,6 +655,8 @@ interrupts = <0 155 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp7_clks R8A7790_CLK_HSCIF1>; clock-names = "sci_ick"; + dmas = <&dmac0 0x4d>, <&dmac0 0x4e>; + dma-names = "tx", "rx"; status = "disabled"; }; @@ -650,6 +695,9 @@ renesas,buswait = <4>; phys = <&usb0 1>; phy-names = "usb"; + dmas = <&usb_dmac0 0>, <&usb_dmac0 1>, + <&usb_dmac1 0>, <&usb_dmac1 1>; + dma-names = "ch0", "ch1", "ch2", "ch3"; status = "disabled"; }; @@ -1158,6 +1206,14 @@ "iic0", "pciec", "iic1", "ssusb", "cmt1", "usbdmac0", "usbdmac1"; }; + mstp4_clks: mstp4_clks@e6150140 { + compatible = "renesas,r8a7790-mstp-clocks", "renesas,cpg-mstp-clocks"; + reg = <0 0xe6150140 0 4>, <0 0xe615004c 0 4>; + clocks = <&cp_clk>; + #clock-cells = <1>; + clock-indices = <R8A7790_CLK_IRQC>; + clock-output-names = "irqc"; + }; mstp5_clks: mstp5_clks@e6150144 { compatible = "renesas,r8a7790-mstp-clocks", "renesas,cpg-mstp-clocks"; reg = <0 0xe6150144 0 4>, <0 0xe615003c 0 4>; @@ -1273,7 +1329,7 @@ msiof0: spi@e6e20000 { compatible = "renesas,msiof-r8a7790"; - reg = <0 0xe6e20000 0 0x0064>, <0 0xe7e20000 0 0x0064>; + reg = <0 0xe6e20000 0 0x0064>; interrupts = <0 156 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp0_clks R8A7790_CLK_MSIOF0>; dmas = <&dmac0 0x51>, <&dmac0 0x52>; @@ -1285,7 +1341,7 @@ msiof1: spi@e6e10000 { compatible = "renesas,msiof-r8a7790"; - reg = <0 0xe6e10000 0 0x0064>, <0 0xe7e10000 0 0x0064>; + reg = <0 0xe6e10000 0 0x0064>; interrupts = <0 157 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp2_clks R8A7790_CLK_MSIOF1>; dmas = <&dmac0 0x55>, <&dmac0 0x56>; @@ -1297,7 +1353,7 @@ msiof2: spi@e6e00000 { compatible = "renesas,msiof-r8a7790"; - reg = <0 0xe6e00000 0 0x0064>, <0 0xe7e00000 0 0x0064>; + reg = <0 0xe6e00000 0 0x0064>; interrupts = <0 158 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp2_clks R8A7790_CLK_MSIOF2>; dmas = <&dmac0 0x41>, <&dmac0 0x42>; @@ -1309,7 +1365,7 @@ msiof3: spi@e6c90000 { compatible = "renesas,msiof-r8a7790"; - reg = <0 0xe6c90000 0 0x0064>, <0 0xe7c90000 0 0x0064>; + reg = <0 0xe6c90000 0 0x0064>; interrupts = <0 159 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp2_clks R8A7790_CLK_MSIOF3>; dmas = <&dmac0 0x45>, <&dmac0 0x46>; @@ -1442,7 +1498,7 @@ status = "disabled"; }; - rcar_sound: rcar_sound@ec500000 { + rcar_sound: sound@ec500000 { /* * #sound-dai-cells is required * diff --git a/arch/arm/boot/dts/r8a7791-henninger.dts b/arch/arm/boot/dts/r8a7791-henninger.dts index e33e4047b..655d1804e 100644 --- a/arch/arm/boot/dts/r8a7791-henninger.dts +++ b/arch/arm/boot/dts/r8a7791-henninger.dts @@ -226,7 +226,7 @@ flash@0 { #address-cells = <1>; #size-cells = <1>; - compatible = "spansion,s25fl512s"; + compatible = "spansion,s25fl512s", "jedec,spi-nor"; reg = <0>; spi-max-frequency = <30000000>; spi-tx-bus-width = <4>; diff --git a/arch/arm/boot/dts/r8a7791-koelsch.dts b/arch/arm/boot/dts/r8a7791-koelsch.dts index 824ddab9c..cffe33ff4 100644 --- a/arch/arm/boot/dts/r8a7791-koelsch.dts +++ b/arch/arm/boot/dts/r8a7791-koelsch.dts @@ -474,7 +474,7 @@ flash: flash@0 { #address-cells = <1>; #size-cells = <1>; - compatible = "spansion,s25fl512s"; + compatible = "spansion,s25fl512s", "jedec,spi-nor"; reg = <0>; spi-max-frequency = <30000000>; spi-tx-bus-width = <4>; @@ -522,7 +522,7 @@ status = "okay"; clock-frequency = <100000>; - ak4643: sound-codec@12 { + ak4643: codec@12 { compatible = "asahi-kasei,ak4643"; #sound-dai-cells = <0>; reg = <0x12>; diff --git a/arch/arm/boot/dts/r8a7791.dtsi b/arch/arm/boot/dts/r8a7791.dtsi index 4696062f6..dc1cd3f16 100644 --- a/arch/arm/boot/dts/r8a7791.dtsi +++ b/arch/arm/boot/dts/r8a7791.dtsi @@ -239,6 +239,7 @@ <0 15 IRQ_TYPE_LEVEL_HIGH>, <0 16 IRQ_TYPE_LEVEL_HIGH>, <0 17 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp4_clks R8A7791_CLK_IRQC>; }; dmac0: dma-controller@e6700000 { @@ -357,6 +358,28 @@ dma-channels = <13>; }; + usb_dmac0: dma-controller@e65a0000 { + compatible = "renesas,usb-dmac"; + reg = <0 0xe65a0000 0 0x100>; + interrupts = <0 109 IRQ_TYPE_LEVEL_HIGH + 0 109 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "ch0", "ch1"; + clocks = <&mstp3_clks R8A7791_CLK_USBDMAC0>; + #dma-cells = <1>; + dma-channels = <2>; + }; + + usb_dmac1: dma-controller@e65b0000 { + compatible = "renesas,usb-dmac"; + reg = <0 0xe65b0000 0 0x100>; + interrupts = <0 110 IRQ_TYPE_LEVEL_HIGH + 0 110 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "ch0", "ch1"; + clocks = <&mstp3_clks R8A7791_CLK_USBDMAC1>; + #dma-cells = <1>; + dma-channels = <2>; + }; + /* The memory map in the User's Manual maps the cores to bus numbers */ i2c0: i2c@e6508000 { #address-cells = <1>; @@ -471,6 +494,7 @@ dma-names = "tx", "rx"; reg-io-width = <4>; status = "disabled"; + max-frequency = <97500000>; }; sdhi0: sd@ee100000 { @@ -509,6 +533,8 @@ interrupts = <0 144 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp2_clks R8A7791_CLK_SCIFA0>; clock-names = "sci_ick"; + dmas = <&dmac0 0x21>, <&dmac0 0x22>; + dma-names = "tx", "rx"; status = "disabled"; }; @@ -518,6 +544,8 @@ interrupts = <0 145 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp2_clks R8A7791_CLK_SCIFA1>; clock-names = "sci_ick"; + dmas = <&dmac0 0x25>, <&dmac0 0x26>; + dma-names = "tx", "rx"; status = "disabled"; }; @@ -527,6 +555,8 @@ interrupts = <0 151 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp2_clks R8A7791_CLK_SCIFA2>; clock-names = "sci_ick"; + dmas = <&dmac0 0x27>, <&dmac0 0x28>; + dma-names = "tx", "rx"; status = "disabled"; }; @@ -536,6 +566,8 @@ interrupts = <0 29 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp11_clks R8A7791_CLK_SCIFA3>; clock-names = "sci_ick"; + dmas = <&dmac0 0x1b>, <&dmac0 0x1c>; + dma-names = "tx", "rx"; status = "disabled"; }; @@ -545,6 +577,8 @@ interrupts = <0 30 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp11_clks R8A7791_CLK_SCIFA4>; clock-names = "sci_ick"; + dmas = <&dmac0 0x1f>, <&dmac0 0x20>; + dma-names = "tx", "rx"; status = "disabled"; }; @@ -554,6 +588,8 @@ interrupts = <0 31 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp11_clks R8A7791_CLK_SCIFA5>; clock-names = "sci_ick"; + dmas = <&dmac0 0x23>, <&dmac0 0x24>; + dma-names = "tx", "rx"; status = "disabled"; }; @@ -563,6 +599,8 @@ interrupts = <0 148 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp2_clks R8A7791_CLK_SCIFB0>; clock-names = "sci_ick"; + dmas = <&dmac0 0x3d>, <&dmac0 0x3e>; + dma-names = "tx", "rx"; status = "disabled"; }; @@ -572,6 +610,8 @@ interrupts = <0 149 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp2_clks R8A7791_CLK_SCIFB1>; clock-names = "sci_ick"; + dmas = <&dmac0 0x19>, <&dmac0 0x1a>; + dma-names = "tx", "rx"; status = "disabled"; }; @@ -581,6 +621,8 @@ interrupts = <0 150 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp2_clks R8A7791_CLK_SCIFB2>; clock-names = "sci_ick"; + dmas = <&dmac0 0x1d>, <&dmac0 0x1e>; + dma-names = "tx", "rx"; status = "disabled"; }; @@ -590,6 +632,8 @@ interrupts = <0 152 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp7_clks R8A7791_CLK_SCIF0>; clock-names = "sci_ick"; + dmas = <&dmac0 0x29>, <&dmac0 0x2a>; + dma-names = "tx", "rx"; status = "disabled"; }; @@ -599,6 +643,8 @@ interrupts = <0 153 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp7_clks R8A7791_CLK_SCIF1>; clock-names = "sci_ick"; + dmas = <&dmac0 0x2d>, <&dmac0 0x2e>; + dma-names = "tx", "rx"; status = "disabled"; }; @@ -608,6 +654,8 @@ interrupts = <0 22 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp7_clks R8A7791_CLK_SCIF2>; clock-names = "sci_ick"; + dmas = <&dmac0 0x2b>, <&dmac0 0x2c>; + dma-names = "tx", "rx"; status = "disabled"; }; @@ -617,6 +665,8 @@ interrupts = <0 23 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp7_clks R8A7791_CLK_SCIF3>; clock-names = "sci_ick"; + dmas = <&dmac0 0x2f>, <&dmac0 0x30>; + dma-names = "tx", "rx"; status = "disabled"; }; @@ -626,6 +676,8 @@ interrupts = <0 24 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp7_clks R8A7791_CLK_SCIF4>; clock-names = "sci_ick"; + dmas = <&dmac0 0xfb>, <&dmac0 0xfc>; + dma-names = "tx", "rx"; status = "disabled"; }; @@ -635,6 +687,8 @@ interrupts = <0 25 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp7_clks R8A7791_CLK_SCIF5>; clock-names = "sci_ick"; + dmas = <&dmac0 0xfd>, <&dmac0 0xfe>; + dma-names = "tx", "rx"; status = "disabled"; }; @@ -644,6 +698,8 @@ interrupts = <0 154 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp7_clks R8A7791_CLK_HSCIF0>; clock-names = "sci_ick"; + dmas = <&dmac0 0x39>, <&dmac0 0x3a>; + dma-names = "tx", "rx"; status = "disabled"; }; @@ -653,6 +709,8 @@ interrupts = <0 155 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp7_clks R8A7791_CLK_HSCIF1>; clock-names = "sci_ick"; + dmas = <&dmac0 0x4d>, <&dmac0 0x4e>; + dma-names = "tx", "rx"; status = "disabled"; }; @@ -662,6 +720,8 @@ interrupts = <0 21 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp7_clks R8A7791_CLK_HSCIF2>; clock-names = "sci_ick"; + dmas = <&dmac0 0x3b>, <&dmac0 0x3c>; + dma-names = "tx", "rx"; status = "disabled"; }; @@ -700,6 +760,9 @@ renesas,buswait = <4>; phys = <&usb0 1>; phy-names = "usb"; + dmas = <&usb_dmac0 0>, <&usb_dmac0 1>, + <&usb_dmac1 0>, <&usb_dmac1 1>; + dma-names = "ch0", "ch1", "ch2", "ch3"; status = "disabled"; }; @@ -1160,6 +1223,14 @@ "mmcif0", "i2c7", "pciec", "i2c8", "ssusb", "cmt1", "usbdmac0", "usbdmac1"; }; + mstp4_clks: mstp4_clks@e6150140 { + compatible = "renesas,r8a7791-mstp-clocks", "renesas,cpg-mstp-clocks"; + reg = <0 0xe6150140 0 4>, <0 0xe615004c 0 4>; + clocks = <&cp_clk>; + #clock-cells = <1>; + clock-indices = <R8A7791_CLK_IRQC>; + clock-output-names = "irqc"; + }; mstp5_clks: mstp5_clks@e6150144 { compatible = "renesas,r8a7791-mstp-clocks", "renesas,cpg-mstp-clocks"; reg = <0 0xe6150144 0 4>, <0 0xe615003c 0 4>; @@ -1288,7 +1359,7 @@ msiof0: spi@e6e20000 { compatible = "renesas,msiof-r8a7791"; - reg = <0 0xe6e20000 0 0x0064>, <0 0xe7e20000 0 0x0064>; + reg = <0 0xe6e20000 0 0x0064>; interrupts = <0 156 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp0_clks R8A7791_CLK_MSIOF0>; dmas = <&dmac0 0x51>, <&dmac0 0x52>; @@ -1300,7 +1371,7 @@ msiof1: spi@e6e10000 { compatible = "renesas,msiof-r8a7791"; - reg = <0 0xe6e10000 0 0x0064>, <0 0xe7e10000 0 0x0064>; + reg = <0 0xe6e10000 0 0x0064>; interrupts = <0 157 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp2_clks R8A7791_CLK_MSIOF1>; dmas = <&dmac0 0x55>, <&dmac0 0x56>; @@ -1312,7 +1383,7 @@ msiof2: spi@e6e00000 { compatible = "renesas,msiof-r8a7791"; - reg = <0 0xe6e00000 0 0x0064>, <0 0xe7e00000 0 0x0064>; + reg = <0 0xe6e00000 0 0x0064>; interrupts = <0 158 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp2_clks R8A7791_CLK_MSIOF2>; dmas = <&dmac0 0x41>, <&dmac0 0x42>; @@ -1485,7 +1556,7 @@ status = "disabled"; }; - rcar_sound: rcar_sound@ec500000 { + rcar_sound: sound@ec500000 { /* * #sound-dai-cells is required * diff --git a/arch/arm/boot/dts/r8a7794.dtsi b/arch/arm/boot/dts/r8a7794.dtsi index 7a3ffa51a..b73819423 100644 --- a/arch/arm/boot/dts/r8a7794.dtsi +++ b/arch/arm/boot/dts/r8a7794.dtsi @@ -105,6 +105,7 @@ <0 15 IRQ_TYPE_LEVEL_HIGH>, <0 16 IRQ_TYPE_LEVEL_HIGH>, <0 17 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp4_clks R8A7794_CLK_IRQC>; }; dmac0: dma-controller@e6700000 { @@ -173,6 +174,8 @@ interrupts = <0 144 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp2_clks R8A7794_CLK_SCIFA0>; clock-names = "sci_ick"; + dmas = <&dmac0 0x21>, <&dmac0 0x22>; + dma-names = "tx", "rx"; status = "disabled"; }; @@ -182,6 +185,8 @@ interrupts = <0 145 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp2_clks R8A7794_CLK_SCIFA1>; clock-names = "sci_ick"; + dmas = <&dmac0 0x25>, <&dmac0 0x26>; + dma-names = "tx", "rx"; status = "disabled"; }; @@ -191,6 +196,8 @@ interrupts = <0 151 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp2_clks R8A7794_CLK_SCIFA2>; clock-names = "sci_ick"; + dmas = <&dmac0 0x27>, <&dmac0 0x28>; + dma-names = "tx", "rx"; status = "disabled"; }; @@ -200,6 +207,8 @@ interrupts = <0 29 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp11_clks R8A7794_CLK_SCIFA3>; clock-names = "sci_ick"; + dmas = <&dmac0 0x1b>, <&dmac0 0x1c>; + dma-names = "tx", "rx"; status = "disabled"; }; @@ -209,6 +218,8 @@ interrupts = <0 30 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp11_clks R8A7794_CLK_SCIFA4>; clock-names = "sci_ick"; + dmas = <&dmac0 0x1f>, <&dmac0 0x20>; + dma-names = "tx", "rx"; status = "disabled"; }; @@ -218,6 +229,8 @@ interrupts = <0 31 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp11_clks R8A7794_CLK_SCIFA5>; clock-names = "sci_ick"; + dmas = <&dmac0 0x23>, <&dmac0 0x24>; + dma-names = "tx", "rx"; status = "disabled"; }; @@ -227,6 +240,8 @@ interrupts = <0 148 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp2_clks R8A7794_CLK_SCIFB0>; clock-names = "sci_ick"; + dmas = <&dmac0 0x3d>, <&dmac0 0x3e>; + dma-names = "tx", "rx"; status = "disabled"; }; @@ -236,6 +251,8 @@ interrupts = <0 149 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp2_clks R8A7794_CLK_SCIFB1>; clock-names = "sci_ick"; + dmas = <&dmac0 0x19>, <&dmac0 0x1a>; + dma-names = "tx", "rx"; status = "disabled"; }; @@ -245,6 +262,8 @@ interrupts = <0 150 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp2_clks R8A7794_CLK_SCIFB2>; clock-names = "sci_ick"; + dmas = <&dmac0 0x1d>, <&dmac0 0x1e>; + dma-names = "tx", "rx"; status = "disabled"; }; @@ -254,6 +273,8 @@ interrupts = <0 152 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp7_clks R8A7794_CLK_SCIF0>; clock-names = "sci_ick"; + dmas = <&dmac0 0x29>, <&dmac0 0x2a>; + dma-names = "tx", "rx"; status = "disabled"; }; @@ -263,6 +284,8 @@ interrupts = <0 153 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp7_clks R8A7794_CLK_SCIF1>; clock-names = "sci_ick"; + dmas = <&dmac0 0x2d>, <&dmac0 0x2e>; + dma-names = "tx", "rx"; status = "disabled"; }; @@ -272,6 +295,8 @@ interrupts = <0 22 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp7_clks R8A7794_CLK_SCIF2>; clock-names = "sci_ick"; + dmas = <&dmac0 0x2b>, <&dmac0 0x2c>; + dma-names = "tx", "rx"; status = "disabled"; }; @@ -281,6 +306,8 @@ interrupts = <0 23 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp7_clks R8A7794_CLK_SCIF3>; clock-names = "sci_ick"; + dmas = <&dmac0 0x2f>, <&dmac0 0x30>; + dma-names = "tx", "rx"; status = "disabled"; }; @@ -290,6 +317,8 @@ interrupts = <0 24 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp7_clks R8A7794_CLK_SCIF4>; clock-names = "sci_ick"; + dmas = <&dmac0 0xfb>, <&dmac0 0xfc>; + dma-names = "tx", "rx"; status = "disabled"; }; @@ -299,6 +328,8 @@ interrupts = <0 25 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp7_clks R8A7794_CLK_SCIF5>; clock-names = "sci_ick"; + dmas = <&dmac0 0xfd>, <&dmac0 0xfe>; + dma-names = "tx", "rx"; status = "disabled"; }; @@ -308,6 +339,8 @@ interrupts = <0 154 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp7_clks R8A7794_CLK_HSCIF0>; clock-names = "sci_ick"; + dmas = <&dmac0 0x39>, <&dmac0 0x3a>; + dma-names = "tx", "rx"; status = "disabled"; }; @@ -317,6 +350,8 @@ interrupts = <0 155 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp7_clks R8A7794_CLK_HSCIF1>; clock-names = "sci_ick"; + dmas = <&dmac0 0x4d>, <&dmac0 0x4e>; + dma-names = "tx", "rx"; status = "disabled"; }; @@ -326,6 +361,8 @@ interrupts = <0 21 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp7_clks R8A7794_CLK_HSCIF2>; clock-names = "sci_ick"; + dmas = <&dmac0 0x3b>, <&dmac0 0x3c>; + dma-names = "tx", "rx"; status = "disabled"; }; @@ -625,6 +662,14 @@ "sdhi2", "sdhi1", "sdhi0", "mmcif0", "cmt1", "usbdmac0", "usbdmac1"; }; + mstp4_clks: mstp4_clks@e6150140 { + compatible = "renesas,r8a7794-mstp-clocks", "renesas,cpg-mstp-clocks"; + reg = <0 0xe6150140 0 4>, <0 0xe615004c 0 4>; + clocks = <&cp_clk>; + #clock-cells = <1>; + clock-indices = <R8A7794_CLK_IRQC>; + clock-output-names = "irqc"; + }; mstp7_clks: mstp7_clks@e615014c { compatible = "renesas,r8a7794-mstp-clocks", "renesas,cpg-mstp-clocks"; reg = <0 0xe615014c 0 4>, <0 0xe61501c4 0 4>; diff --git a/arch/arm/boot/dts/rk3066a-bqcurie2.dts b/arch/arm/boot/dts/rk3066a-bqcurie2.dts index baf21ac6c..b299b2692 100644 --- a/arch/arm/boot/dts/rk3066a-bqcurie2.dts +++ b/arch/arm/boot/dts/rk3066a-bqcurie2.dts @@ -2,15 +2,43 @@ * Copyright (c) 2013 MundoReader S.L. * Author: Heiko Stuebner <heiko@sntech.de> * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; diff --git a/arch/arm/boot/dts/rk3066a.dtsi b/arch/arm/boot/dts/rk3066a.dtsi index 41ffd4951..d32229b8a 100644 --- a/arch/arm/boot/dts/rk3066a.dtsi +++ b/arch/arm/boot/dts/rk3066a.dtsi @@ -2,15 +2,43 @@ * Copyright (c) 2013 MundoReader S.L. * Author: Heiko Stuebner <heiko@sntech.de> * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. */ #include <dt-bindings/gpio/gpio.h> diff --git a/arch/arm/boot/dts/rk3188-radxarock.dts b/arch/arm/boot/dts/rk3188-radxarock.dts index bdf857019..42faa19ed 100644 --- a/arch/arm/boot/dts/rk3188-radxarock.dts +++ b/arch/arm/boot/dts/rk3188-radxarock.dts @@ -1,15 +1,43 @@ /* * Copyright (c) 2013 Heiko Stuebner <heiko@sntech.de> * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; @@ -152,6 +180,7 @@ compatible = "active-semi,act8846"; reg = <0x5a>; status = "okay"; + system-power-controller; pinctrl-names = "default"; pinctrl-0 = <&act8846_dvs0_ctl>; diff --git a/arch/arm/boot/dts/rk3188.dtsi b/arch/arm/boot/dts/rk3188.dtsi index 1d4d79c66..0f23aedf9 100644 --- a/arch/arm/boot/dts/rk3188.dtsi +++ b/arch/arm/boot/dts/rk3188.dtsi @@ -2,15 +2,43 @@ * Copyright (c) 2013 MundoReader S.L. * Author: Heiko Stuebner <heiko@sntech.de> * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. */ #include <dt-bindings/gpio/gpio.h> diff --git a/arch/arm/boot/dts/rk3288-evb-act8846.dts b/arch/arm/boot/dts/rk3288-evb-act8846.dts index 1687e8336..43949a677 100644 --- a/arch/arm/boot/dts/rk3288-evb-act8846.dts +++ b/arch/arm/boot/dts/rk3288-evb-act8846.dts @@ -1,13 +1,41 @@ /* - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; diff --git a/arch/arm/boot/dts/rk3288-evb-rk808.dts b/arch/arm/boot/dts/rk3288-evb-rk808.dts index f62ea7875..18eb6cb49 100644 --- a/arch/arm/boot/dts/rk3288-evb-rk808.dts +++ b/arch/arm/boot/dts/rk3288-evb-rk808.dts @@ -1,13 +1,41 @@ /* - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; diff --git a/arch/arm/boot/dts/rk3288-evb.dtsi b/arch/arm/boot/dts/rk3288-evb.dtsi index 4a457518d..844a6fb64 100644 --- a/arch/arm/boot/dts/rk3288-evb.dtsi +++ b/arch/arm/boot/dts/rk3288-evb.dtsi @@ -1,13 +1,41 @@ /* - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. */ #include <dt-bindings/pwm/pwm.h> @@ -112,6 +140,23 @@ regulator-always-on; regulator-boot-on; }; + + /* + * NOTE: vcc_sd isn't hooked up on v1.0 boards where power comes from + * vcc_io directly. Those boards won't be able to power cycle SD cards + * but it shouldn't hurt to toggle this pin there anyway. + */ + vcc_sd: sdmmc-regulator { + compatible = "regulator-fixed"; + gpio = <&gpio7 11 GPIO_ACTIVE_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&sdmmc_pwr>; + regulator-name = "vcc_sd"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + startup-delay-us = <100000>; + vin-supply = <&vcc_io>; + }; }; &emmc { @@ -141,6 +186,8 @@ pinctrl-names = "default"; pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_cd &sdmmc_bus4>; status = "okay"; + vmmc-supply = <&vcc_sd>; + vqmmc-supply = <&vccio_sd>; }; &i2c0 { @@ -232,6 +279,10 @@ sdmmc_cmd: sdmmc-cmd { rockchip,pins = <6 21 RK_FUNC_1 &pcfg_pull_up_drv_8ma>; }; + + sdmmc_pwr: sdmmc-pwr { + rockchip,pins = <7 11 RK_FUNC_GPIO &pcfg_pull_none>; + }; }; usb { diff --git a/arch/arm/boot/dts/rk3288-firefly.dtsi b/arch/arm/boot/dts/rk3288-firefly.dtsi index b54dd7858..0b42372e4 100644 --- a/arch/arm/boot/dts/rk3288-firefly.dtsi +++ b/arch/arm/boot/dts/rk3288-firefly.dtsi @@ -246,6 +246,14 @@ pinctrl-0 = <&pmic_vsel>, <&pwr_hold>; system-power-controller; + vp1-supply = <&vcc_sys>; + vp2-supply = <&vcc_sys>; + vp3-supply = <&vcc_sys>; + vp4-supply = <&vcc_sys>; + inl1-supply = <&vcc_sys>; + inl2-supply = <&vcc_sys>; + inl3-supply = <&vcc_20>; + regulators { vcc_ddr: REG1 { regulator-name = "vcc_ddr"; @@ -457,6 +465,12 @@ status = "okay"; }; +&tsadc { + rockchip,hw-tshut-mode = <0>; + rockchip,hw-tshut-polarity = <0>; + status = "okay"; +}; + &uart0 { pinctrl-names = "default"; pinctrl-0 = <&uart0_xfer>, <&uart0_cts>, <&uart0_rts>; diff --git a/arch/arm/boot/dts/rk3288-popmetal.dts b/arch/arm/boot/dts/rk3288-popmetal.dts index d081f0e0d..d582811fb 100644 --- a/arch/arm/boot/dts/rk3288-popmetal.dts +++ b/arch/arm/boot/dts/rk3288-popmetal.dts @@ -406,6 +406,12 @@ }; }; +&tsadc { + rockchip,hw-tshut-mode = <0>; + rockchip,hw-tshut-polarity = <0>; + status = "okay"; +}; + &vopb { status = "okay"; }; diff --git a/arch/arm/boot/dts/rk3288-thermal.dtsi b/arch/arm/boot/dts/rk3288-thermal.dtsi index 2695200c0..340406652 100644 --- a/arch/arm/boot/dts/rk3288-thermal.dtsi +++ b/arch/arm/boot/dts/rk3288-thermal.dtsi @@ -3,9 +3,43 @@ * * Copyright (c) 2014, Fuzhou Rockchip Electronics Co., Ltd * - * This file is licensed under the terms of the GNU General Public License - * version 2. This program is licensed "as is" without any warranty of any - * kind, whether express or implied. + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. */ #include <dt-bindings/thermal/thermal.h> diff --git a/arch/arm/boot/dts/rk3288.dtsi b/arch/arm/boot/dts/rk3288.dtsi index 165968d51..22316d004 100644 --- a/arch/arm/boot/dts/rk3288.dtsi +++ b/arch/arm/boot/dts/rk3288.dtsi @@ -1,13 +1,41 @@ /* - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. */ #include <dt-bindings/gpio/gpio.h> @@ -44,6 +72,14 @@ spi2 = &spi2; }; + arm-pmu { + compatible = "arm,cortex-a12-pmu"; + interrupts = <GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>; + }; + cpus { #address-cells = <1>; #size-cells = <0>; @@ -434,6 +470,7 @@ interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cru HCLK_USBHOST1>; clock-names = "otg"; + dr_mode = "host"; phys = <&usbphy2>; phy-names = "usb2-phy"; status = "disabled"; @@ -446,6 +483,11 @@ interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cru HCLK_OTG0>; clock-names = "otg"; + dr_mode = "otg"; + g-np-tx-fifo-size = <16>; + g-rx-fifo-size = <275>; + g-tx-fifo-size = <256 128 128 64 64 32>; + g-use-dma; phys = <&usbphy0>; phy-names = "usb2-phy"; status = "disabled"; diff --git a/arch/arm/boot/dts/rk3xxx.dtsi b/arch/arm/boot/dts/rk3xxx.dtsi index c54a9715d..a2ae9f324 100644 --- a/arch/arm/boot/dts/rk3xxx.dtsi +++ b/arch/arm/boot/dts/rk3xxx.dtsi @@ -2,15 +2,43 @@ * Copyright (c) 2013 MundoReader S.L. * Author: Heiko Stuebner <heiko@sntech.de> * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. */ #include <dt-bindings/interrupt-controller/irq.h> diff --git a/arch/arm/boot/dts/s3c2416-smdk2416.dts b/arch/arm/boot/dts/s3c2416-smdk2416.dts index ea92fd695..f257926c1 100644 --- a/arch/arm/boot/dts/s3c2416-smdk2416.dts +++ b/arch/arm/boot/dts/s3c2416-smdk2416.dts @@ -31,55 +31,55 @@ #clock-cells = <0>; }; }; +}; - serial@50000000 { - status = "okay"; - pinctrl-names = "default"; - pinctrl-0 = <&uart0_data>, <&uart0_fctl>; - }; +&rtc { + status = "okay"; +}; - serial@50004000 { - status = "okay"; - pinctrl-names = "default"; - pinctrl-0 = <&uart1_data>, <&uart1_fctl>; - }; +&sdhci_0 { + pinctrl-names = "default"; + pinctrl-0 = <&sd1_clk>, <&sd1_cmd>, + <&sd1_bus1>, <&sd1_bus4>; + bus-width = <4>; + broken-cd; + status = "okay"; +}; - serial@50008000 { - status = "okay"; - pinctrl-names = "default"; - pinctrl-0 = <&uart2_data>; - }; +&sdhci_1 { + pinctrl-names = "default"; + pinctrl-0 = <&sd0_clk>, <&sd0_cmd>, + <&sd0_bus1>, <&sd0_bus4>; + bus-width = <4>; + cd-gpios = <&gpf 1 0>; + cd-inverted; + status = "okay"; +}; - serial@5000C000 { - status = "okay"; - pinctrl-names = "default"; - pinctrl-0 = <&uart3_data>; - }; +&uart_0 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&uart0_data>, <&uart0_fctl>; +}; - watchdog@53000000 { - status = "okay"; - }; +&uart_1 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&uart1_data>, <&uart1_fctl>; +}; - rtc@57000000 { - status = "okay"; - }; +&uart_2 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&uart2_data>; +}; - sdhci@4AC00000 { - pinctrl-names = "default"; - pinctrl-0 = <&sd0_clk>, <&sd0_cmd>, - <&sd0_bus1>, <&sd0_bus4>; - bus-width = <4>; - cd-gpios = <&gpf 1 0>; - cd-inverted; - status = "okay"; - }; +&uart_3 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&uart3_data>; +}; - sdhci@4A800000 { - pinctrl-names = "default"; - pinctrl-0 = <&sd1_clk>, <&sd1_cmd>, - <&sd1_bus1>, <&sd1_bus4>; - bus-width = <4>; - broken-cd; - status = "okay"; - }; +&watchdog { + status = "okay"; }; diff --git a/arch/arm/boot/dts/s3c2416.dtsi b/arch/arm/boot/dts/s3c2416.dtsi index 30b8f7e47..a5184ff56 100644 --- a/arch/arm/boot/dts/s3c2416.dtsi +++ b/arch/arm/boot/dts/s3c2416.dtsi @@ -17,7 +17,7 @@ compatible = "samsung,s3c2416"; aliases { - serial3 = &uart3; + serial3 = &uart_3; }; cpus { @@ -48,7 +48,7 @@ clock-names = "timers"; }; - serial@50000000 { + uart_0: serial@50000000 { compatible = "samsung,s3c2440-uart"; clock-names = "uart", "clk_uart_baud2", "clk_uart_baud3"; @@ -56,7 +56,7 @@ <&clocks SCLK_UART>; }; - serial@50004000 { + uart_1: serial@50004000 { compatible = "samsung,s3c2440-uart"; clock-names = "uart", "clk_uart_baud2", "clk_uart_baud3"; @@ -64,7 +64,7 @@ <&clocks SCLK_UART>; }; - serial@50008000 { + uart_2: serial@50008000 { compatible = "samsung,s3c2440-uart"; clock-names = "uart", "clk_uart_baud2", "clk_uart_baud3"; @@ -72,7 +72,7 @@ <&clocks SCLK_UART>; }; - uart3: serial@5000C000 { + uart_3: serial@5000C000 { compatible = "samsung,s3c2440-uart"; reg = <0x5000C000 0x4000>; interrupts = <1 18 24 4>, <1 18 25 4>; @@ -83,7 +83,7 @@ status = "disabled"; }; - sdhci@4AC00000 { + sdhci_1: sdhci@4AC00000 { compatible = "samsung,s3c6410-sdhci"; reg = <0x4AC00000 0x100>; interrupts = <0 0 21 3>; @@ -94,7 +94,7 @@ status = "disabled"; }; - sdhci@4A800000 { + sdhci_0: sdhci@4A800000 { compatible = "samsung,s3c6410-sdhci"; reg = <0x4A800000 0x100>; interrupts = <0 0 20 3>; @@ -105,13 +105,13 @@ status = "disabled"; }; - watchdog@53000000 { + watchdog: watchdog@53000000 { interrupts = <1 9 27 3>; clocks = <&clocks PCLK_WDT>; clock-names = "watchdog"; }; - rtc@57000000 { + rtc: rtc@57000000 { compatible = "samsung,s3c2416-rtc"; clocks = <&clocks PCLK_RTC>; clock-names = "rtc"; diff --git a/arch/arm/boot/dts/sama5d3.dtsi b/arch/arm/boot/dts/sama5d3.dtsi index 37e6182f1..9e2444b07 100644 --- a/arch/arm/boot/dts/sama5d3.dtsi +++ b/arch/arm/boot/dts/sama5d3.dtsi @@ -1439,9 +1439,8 @@ compatible = "atmel,at91rm9200-ohci", "usb-ohci"; reg = <0x00600000 0x100000>; interrupts = <32 IRQ_TYPE_LEVEL_HIGH 2>; - clocks = <&usb>, <&uhphs_clk>, <&uhphs_clk>, - <&uhpck>; - clock-names = "usb_clk", "ohci_clk", "hclk", "uhpck"; + clocks = <&uhphs_clk>, <&uhphs_clk>, <&uhpck>; + clock-names = "ohci_clk", "hclk", "uhpck"; status = "disabled"; }; @@ -1449,8 +1448,8 @@ compatible = "atmel,at91sam9g45-ehci", "usb-ehci"; reg = <0x00700000 0x100000>; interrupts = <32 IRQ_TYPE_LEVEL_HIGH 2>; - clocks = <&utmi>, <&uhphs_clk>, <&uhpck>; - clock-names = "usb_clk", "ehci_clk", "uhpck"; + clocks = <&utmi>, <&uhphs_clk>; + clock-names = "usb_clk", "ehci_clk"; status = "disabled"; }; @@ -1478,7 +1477,7 @@ #address-cells = <1>; #size-cells = <1>; reg = < - 0x70000000 0x10000000 /* NFC Command Registers */ + 0x70000000 0x08000000 /* NFC Command Registers */ 0xffffc000 0x00000070 /* NFC HSMC regs */ 0x00200000 0x00100000 /* NFC SRAM banks */ >; diff --git a/arch/arm/boot/dts/sama5d3xcm.dtsi b/arch/arm/boot/dts/sama5d3xcm.dtsi index 7d6babdab..2cf9c3611 100644 --- a/arch/arm/boot/dts/sama5d3xcm.dtsi +++ b/arch/arm/boot/dts/sama5d3xcm.dtsi @@ -11,7 +11,8 @@ compatible = "atmel,sama5d3xcm", "atmel,sama5d3", "atmel,sama5"; chosen { - bootargs = "console=ttyS0,115200 rootfstype=ubifs ubi.mtd=5 root=ubi0:rootfs"; + bootargs = "rootfstype=ubifs ubi.mtd=5 root=ubi0:rootfs"; + stdout-path = "serial0:115200n8"; }; memory { @@ -67,12 +68,6 @@ rxd3-skew-ps = <400>; }; }; - - pmc: pmc@fffffc00 { - main: mainck { - clock-frequency = <12000000>; - }; - }; }; nand0: nand@60000000 { diff --git a/arch/arm/boot/dts/sama5d4.dtsi b/arch/arm/boot/dts/sama5d4.dtsi index a5f5f4090..3ee22ee13 100644 --- a/arch/arm/boot/dts/sama5d4.dtsi +++ b/arch/arm/boot/dts/sama5d4.dtsi @@ -59,6 +59,10 @@ serial0 = &usart3; serial1 = &usart4; serial2 = &usart2; + serial3 = &usart0; + serial4 = &usart1; + serial5 = &uart0; + serial6 = &uart1; gpio0 = &pioA; gpio1 = &pioB; gpio2 = &pioC; @@ -254,9 +258,8 @@ compatible = "atmel,at91rm9200-ohci", "usb-ohci"; reg = <0x00500000 0x100000>; interrupts = <46 IRQ_TYPE_LEVEL_HIGH 2>; - clocks = <&usb>, <&uhphs_clk>, <&uhphs_clk>, - <&uhpck>; - clock-names = "usb_clk", "ohci_clk", "hclk", "uhpck"; + clocks = <&uhphs_clk>, <&uhphs_clk>, <&uhpck>; + clock-names = "ohci_clk", "hclk", "uhpck"; status = "disabled"; }; @@ -264,8 +267,8 @@ compatible = "atmel,at91sam9g45-ehci", "usb-ehci"; reg = <0x00600000 0x100000>; interrupts = <46 IRQ_TYPE_LEVEL_HIGH 2>; - clocks = <&utmi>, <&uhphs_clk>, <&uhpck>; - clock-names = "usb_clk", "ehci_clk", "uhpck"; + clocks = <&utmi>, <&uhphs_clk>; + clock-names = "usb_clk", "ehci_clk"; status = "disabled"; }; @@ -299,7 +302,7 @@ #address-cells = <1>; #size-cells = <1>; reg = < - 0x90000000 0x10000000 /* NFC Command Registers */ + 0x90000000 0x08000000 /* NFC Command Registers */ 0xfc05c000 0x00000070 /* NFC HSMC regs */ 0x00100000 0x00100000 /* NFC SRAM banks */ >; @@ -847,6 +850,24 @@ clock-names = "mci_clk"; }; + uart0: serial@f8004000 { + compatible = "atmel,at91sam9260-usart"; + reg = <0xf8004000 0x100>; + interrupts = <27 IRQ_TYPE_LEVEL_HIGH 5>; + dmas = <&dma1 + (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) + | AT91_XDMAC_DT_PERID(22))>, + <&dma1 + (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) + | AT91_XDMAC_DT_PERID(23))>; + dma-names = "tx", "rx"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart0>; + clocks = <&uart0_clk>; + clock-names = "usart"; + status = "disabled"; + }; + ssc0: ssc@f8008000 { compatible = "atmel,at91sam9g45-ssc"; reg = <0xf8008000 0x4000>; @@ -977,6 +998,42 @@ reg = <0xf8028000 0x60>; }; + usart0: serial@f802c000 { + compatible = "atmel,at91sam9260-usart"; + reg = <0xf802c000 0x100>; + interrupts = <6 IRQ_TYPE_LEVEL_HIGH 5>; + dmas = <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) + | AT91_XDMAC_DT_PERID(36))>, + <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) + | AT91_XDMAC_DT_PERID(37))>; + dma-names = "tx", "rx"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usart0 &pinctrl_usart0_rts &pinctrl_usart0_cts>; + clocks = <&usart0_clk>; + clock-names = "usart"; + status = "disabled"; + }; + + usart1: serial@f8030000 { + compatible = "atmel,at91sam9260-usart"; + reg = <0xf8030000 0x100>; + interrupts = <7 IRQ_TYPE_LEVEL_HIGH 5>; + dmas = <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) + | AT91_XDMAC_DT_PERID(38))>, + <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) + | AT91_XDMAC_DT_PERID(39))>; + dma-names = "tx", "rx"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usart1 &pinctrl_usart1_rts &pinctrl_usart1_cts>; + clocks = <&usart1_clk>; + clock-names = "usart"; + status = "disabled"; + }; + mmc1: mmc@fc000000 { compatible = "atmel,hsmci"; reg = <0xfc000000 0x600>; @@ -994,6 +1051,24 @@ clock-names = "mci_clk"; }; + uart1: serial@fc004000 { + compatible = "atmel,at91sam9260-usart"; + reg = <0xfc004000 0x100>; + interrupts = <28 IRQ_TYPE_LEVEL_HIGH 5>; + dmas = <&dma1 + (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) + | AT91_XDMAC_DT_PERID(24))>, + <&dma1 + (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) + | AT91_XDMAC_DT_PERID(25))>; + dma-names = "tx", "rx"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1>; + clocks = <&uart1_clk>; + clock-names = "usart"; + status = "disabled"; + }; + usart2: serial@fc008000 { compatible = "atmel,at91sam9260-usart"; reg = <0xfc008000 0x100>; @@ -1066,6 +1141,46 @@ status = "disabled"; }; + spi1: spi@fc018000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "atmel,at91rm9200-spi"; + reg = <0xfc018000 0x100>; + interrupts = <38 IRQ_TYPE_LEVEL_HIGH 3>; + dmas = <&dma1 + (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) + | AT91_XDMAC_DT_PERID(12))>, + <&dma1 + (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) + | AT91_XDMAC_DT_PERID(13))>; + dma-names = "tx", "rx"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_spi1>; + clocks = <&spi1_clk>; + clock-names = "spi_clk"; + status = "disabled"; + }; + + spi2: spi@fc01c000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "atmel,at91rm9200-spi"; + reg = <0xfc01c000 0x100>; + interrupts = <39 IRQ_TYPE_LEVEL_HIGH 3>; + dmas = <&dma1 + (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) + | AT91_XDMAC_DT_PERID(14))>, + <&dma1 + (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) + | AT91_XDMAC_DT_PERID(15))>; + dma-names = "tx", "rx"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_spi2>; + clocks = <&spi2_clk>; + clock-names = "spi_clk"; + status = "disabled"; + }; + tcb1: timer@fc020000 { compatible = "atmel,at91sam9x5-tcb"; reg = <0xfc020000 0x100>; @@ -1232,7 +1347,8 @@ #address-cells = <1>; #size-cells = <1>; compatible = "atmel,at91sam9x5-pinctrl", "atmel,at91rm9200-pinctrl", "simple-bus"; - ranges = <0xfc06a000 0xfc06a000 0x4000>; + ranges = <0xfc068000 0xfc068000 0x100 + 0xfc06a000 0xfc06a000 0x4000>; /* WARNING: revisit as pin spec has changed */ atmel,mux-mask = < /* A B C */ @@ -1623,6 +1739,74 @@ }; }; + spi1 { + pinctrl_spi1: spi1-0 { + atmel,pins = + <AT91_PIOB 18 AT91_PERIPH_A AT91_PINCTRL_NONE /* SPI1_MISO */ + AT91_PIOB 19 AT91_PERIPH_A AT91_PINCTRL_NONE /* SPI1_MOSI */ + AT91_PIOB 20 AT91_PERIPH_A AT91_PINCTRL_NONE /* SPI1_SPCK */ + >; + }; + }; + + spi2 { + pinctrl_spi2: spi2-0 { + atmel,pins = + <AT91_PIOD 11 AT91_PERIPH_B AT91_PINCTRL_NONE /* SPI2_MISO conflicts with RTS0 */ + AT91_PIOD 13 AT91_PERIPH_B AT91_PINCTRL_NONE /* SPI2_MOSI conflicts with TXD0 */ + AT91_PIOD 15 AT91_PERIPH_B AT91_PINCTRL_NONE /* SPI2_SPCK conflicts with RTS1 */ + >; + }; + }; + + uart0 { + pinctrl_uart0: uart0-0 { + atmel,pins = + <AT91_PIOE 29 AT91_PERIPH_B AT91_PINCTRL_NONE /* RXD */ + AT91_PIOE 30 AT91_PERIPH_B AT91_PINCTRL_PULL_UP /* TXD */ + >; + }; + }; + + uart1 { + pinctrl_uart1: uart1-0 { + atmel,pins = + <AT91_PIOC 25 AT91_PERIPH_C AT91_PINCTRL_NONE /* RXD */ + AT91_PIOC 26 AT91_PERIPH_C AT91_PINCTRL_PULL_UP /* TXD */ + >; + }; + }; + + usart0 { + pinctrl_usart0: usart0-0 { + atmel,pins = + <AT91_PIOD 12 AT91_PERIPH_A AT91_PINCTRL_NONE /* RXD */ + AT91_PIOD 13 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* TXD */ + >; + }; + pinctrl_usart0_rts: usart0_rts-0 { + atmel,pins = <AT91_PIOD 11 AT91_PERIPH_A AT91_PINCTRL_NONE>; + }; + pinctrl_usart0_cts: usart0_cts-0 { + atmel,pins = <AT91_PIOD 10 AT91_PERIPH_A AT91_PINCTRL_NONE>; + }; + }; + + usart1 { + pinctrl_usart1: usart1-0 { + atmel,pins = + <AT91_PIOD 16 AT91_PERIPH_A AT91_PINCTRL_NONE /* RXD */ + AT91_PIOD 17 AT91_PERIPH_A AT91_PINCTRL_PULL_UP /* TXD */ + >; + }; + pinctrl_usart1_rts: usart1_rts-0 { + atmel,pins = <AT91_PIOD 15 AT91_PERIPH_A AT91_PINCTRL_NONE>; + }; + pinctrl_usart1_cts: usart1_cts-0 { + atmel,pins = <AT91_PIOD 14 AT91_PERIPH_A AT91_PINCTRL_NONE>; + }; + }; + usart2 { pinctrl_usart2: usart2-0 { atmel,pins = diff --git a/arch/arm/boot/dts/sh73a0-kzm9g.dts b/arch/arm/boot/dts/sh73a0-kzm9g.dts index 022ba505f..24b4cd24d 100644 --- a/arch/arm/boot/dts/sh73a0-kzm9g.dts +++ b/arch/arm/boot/dts/sh73a0-kzm9g.dts @@ -147,6 +147,7 @@ gpios = <&pcf8575 14 GPIO_ACTIVE_LOW>; linux,code = <KEY_HOME>; label = "SW1"; + gpio-key,wakeup; }; }; diff --git a/arch/arm/boot/dts/sh73a0.dtsi b/arch/arm/boot/dts/sh73a0.dtsi index 45b539ce4..11e17c5f2 100644 --- a/arch/arm/boot/dts/sh73a0.dtsi +++ b/arch/arm/boot/dts/sh73a0.dtsi @@ -90,7 +90,7 @@ status = "disabled"; }; - irqpin0: irqpin@e6900000 { + irqpin0: interrupt-controller@e6900000 { compatible = "renesas,intc-irqpin-sh73a0", "renesas,intc-irqpin"; #interrupt-cells = <2>; interrupt-controller; @@ -112,7 +112,7 @@ control-parent; }; - irqpin1: irqpin@e6900004 { + irqpin1: interrupt-controller@e6900004 { compatible = "renesas,intc-irqpin-sh73a0", "renesas,intc-irqpin"; #interrupt-cells = <2>; interrupt-controller; @@ -134,7 +134,7 @@ control-parent; }; - irqpin2: irqpin@e6900008 { + irqpin2: interrupt-controller@e6900008 { compatible = "renesas,intc-irqpin-sh73a0", "renesas,intc-irqpin"; #interrupt-cells = <2>; interrupt-controller; @@ -156,7 +156,7 @@ control-parent; }; - irqpin3: irqpin@e690000c { + irqpin3: interrupt-controller@e690000c { compatible = "renesas,intc-irqpin-sh73a0", "renesas,intc-irqpin"; #interrupt-cells = <2>; interrupt-controller; @@ -376,7 +376,7 @@ status = "disabled"; }; - scifb8: serial@e6c30000 { + scifb: serial@e6c30000 { compatible = "renesas,scifb-sh73a0", "renesas,scifb"; reg = <0xe6c30000 0x100>; interrupts = <0 80 IRQ_TYPE_LEVEL_HIGH>; diff --git a/arch/arm/boot/dts/socfpga.dtsi b/arch/arm/boot/dts/socfpga.dtsi index d9176e606..80f924dee 100644 --- a/arch/arm/boot/dts/socfpga.dtsi +++ b/arch/arm/boot/dts/socfpga.dtsi @@ -36,6 +36,7 @@ cpus { #address-cells = <1>; #size-cells = <0>; + enable-method = "altr,socfpga-smp"; cpu@0 { compatible = "arm,cortex-a9"; @@ -451,6 +452,14 @@ clk-phase = <0 135>; }; + sdmmc_clk_divided: sdmmc_clk_divided { + #clock-cells = <0>; + compatible = "altr,socfpga-gate-clk"; + clocks = <&sdmmc_clk>; + clk-gate = <0xa0 8>; + fixed-divider = <4>; + }; + nand_x_clk: nand_x_clk { #clock-cells = <0>; compatible = "altr,socfpga-gate-clk"; @@ -488,6 +497,8 @@ reset-names = "stmmaceth"; snps,multicast-filter-bins = <256>; snps,perfect-filter-entries = <128>; + tx-fifo-depth = <4096>; + rx-fifo-depth = <4096>; status = "disabled"; }; @@ -504,6 +515,8 @@ reset-names = "stmmaceth"; snps,multicast-filter-bins = <256>; snps,perfect-filter-entries = <128>; + tx-fifo-depth = <4096>; + rx-fifo-depth = <4096>; status = "disabled"; }; @@ -635,7 +648,7 @@ fifo-depth = <0x400>; #address-cells = <1>; #size-cells = <0>; - clocks = <&l4_mp_clk>, <&sdmmc_clk>; + clocks = <&l4_mp_clk>, <&sdmmc_clk_divided>; clock-names = "biu", "ciu"; }; @@ -655,6 +668,11 @@ status = "disabled"; }; + scu: snoop-control-unit@fffec000 { + compatible = "arm,cortex-a9-scu"; + reg = <0xfffec000 0x100>; + }; + spi1: spi@fff01000 { compatible = "snps,dw-apb-ssi"; #address-cells = <1>; diff --git a/arch/arm/boot/dts/socfpga_arria10.dtsi b/arch/arm/boot/dts/socfpga_arria10.dtsi index 8a05c47fd..4779b0731 100644 --- a/arch/arm/boot/dts/socfpga_arria10.dtsi +++ b/arch/arm/boot/dts/socfpga_arria10.dtsi @@ -21,21 +21,10 @@ #address-cells = <1>; #size-cells = <1>; - aliases { - ethernet0 = &gmac0; - ethernet1 = &gmac1; - ethernet2 = &gmac2; - serial0 = &uart0; - serial1 = &uart1; - timer0 = &timer0; - timer1 = &timer1; - timer2 = &timer2; - timer3 = &timer3; - }; - cpus { #address-cells = <1>; #size-cells = <0>; + enable-method = "altr,socfpga-a10-smp"; cpu@0 { compatible = "arm,cortex-a9"; @@ -98,6 +87,21 @@ #address-cells = <1>; #size-cells = <0>; + cb_intosc_hs_div2_clk: cb_intosc_hs_div2_clk { + #clock-cells = <0>; + compatible = "fixed-clock"; + }; + + cb_intosc_ls_clk: cb_intosc_ls_clk { + #clock-cells = <0>; + compatible = "fixed-clock"; + }; + + f2s_free_clk: f2s_free_clk { + #clock-cells = <0>; + compatible = "fixed-clock"; + }; + osc1: osc1 { #clock-cells = <0>; compatible = "fixed-clock"; @@ -107,47 +111,338 @@ #address-cells = <1>; #size-cells = <0>; #clock-cells = <0>; - compatible = "altr,socfpga-pll-clock"; - clocks = <&osc1>; + compatible = "altr,socfpga-a10-pll-clock"; + clocks = <&osc1>, <&cb_intosc_ls_clk>, + <&f2s_free_clk>; + reg = <0x40>; + + main_mpu_base_clk: main_mpu_base_clk { + #clock-cells = <0>; + compatible = "altr,socfpga-a10-perip-clk"; + clocks = <&main_pll>; + div-reg = <0x140 0 11>; + }; + + main_noc_base_clk: main_noc_base_clk { + #clock-cells = <0>; + compatible = "altr,socfpga-a10-perip-clk"; + clocks = <&main_pll>; + div-reg = <0x144 0 11>; + }; + + main_emaca_clk: main_emaca_clk { + #clock-cells = <0>; + compatible = "altr,socfpga-a10-perip-clk"; + clocks = <&main_pll>; + reg = <0x68>; + }; + + main_emacb_clk: main_emacb_clk { + #clock-cells = <0>; + compatible = "altr,socfpga-a10-perip-clk"; + clocks = <&main_pll>; + reg = <0x6C>; + }; + + main_emac_ptp_clk: main_emac_ptp_clk { + #clock-cells = <0>; + compatible = "altr,socfpga-a10-perip-clk"; + clocks = <&main_pll>; + reg = <0x70>; + }; + + main_gpio_db_clk: main_gpio_db_clk { + #clock-cells = <0>; + compatible = "altr,socfpga-a10-perip-clk"; + clocks = <&main_pll>; + reg = <0x74>; + }; + + main_sdmmc_clk: main_sdmmc_clk { + #clock-cells = <0>; + compatible = "altr,socfpga-a10-perip-clk" +; + clocks = <&main_pll>; + reg = <0x78>; + }; + + main_s2f_usr0_clk: main_s2f_usr0_clk { + #clock-cells = <0>; + compatible = "altr,socfpga-a10-perip-clk"; + clocks = <&main_pll>; + reg = <0x7C>; + }; + + main_s2f_usr1_clk: main_s2f_usr1_clk { + #clock-cells = <0>; + compatible = "altr,socfpga-a10-perip-clk"; + clocks = <&main_pll>; + reg = <0x80>; + }; + + main_hmc_pll_ref_clk: main_hmc_pll_ref_clk { + #clock-cells = <0>; + compatible = "altr,socfpga-a10-perip-clk"; + clocks = <&main_pll>; + reg = <0x84>; + }; + + main_periph_ref_clk: main_periph_ref_clk { + #clock-cells = <0>; + compatible = "altr,socfpga-a10-perip-clk"; + clocks = <&main_pll>; + reg = <0x9C>; + }; }; periph_pll: periph_pll { #address-cells = <1>; #size-cells = <0>; #clock-cells = <0>; - compatible = "altr,socfpga-pll-clock"; - clocks = <&osc1>; + compatible = "altr,socfpga-a10-pll-clock"; + clocks = <&osc1>, <&cb_intosc_ls_clk>, + <&f2s_free_clk>, <&main_periph_ref_clk>; + reg = <0xC0>; + + peri_mpu_base_clk: peri_mpu_base_clk { + #clock-cells = <0>; + compatible = "altr,socfpga-a10-perip-clk"; + clocks = <&periph_pll>; + div-reg = <0x140 16 11>; + }; + + peri_noc_base_clk: peri_noc_base_clk { + #clock-cells = <0>; + compatible = "altr,socfpga-a10-perip-clk"; + clocks = <&periph_pll>; + div-reg = <0x144 16 11>; + }; + + peri_emaca_clk: peri_emaca_clk { + #clock-cells = <0>; + compatible = "altr,socfpga-a10-perip-clk"; + clocks = <&periph_pll>; + reg = <0xE8>; + }; + + peri_emacb_clk: peri_emacb_clk { + #clock-cells = <0>; + compatible = "altr,socfpga-a10-perip-clk"; + clocks = <&periph_pll>; + reg = <0xEC>; + }; + + peri_emac_ptp_clk: peri_emac_ptp_clk { + #clock-cells = <0>; + compatible = "altr,socfpga-a10-perip-clk"; + clocks = <&periph_pll>; + reg = <0xF0>; + }; + + peri_gpio_db_clk: peri_gpio_db_clk { + #clock-cells = <0>; + compatible = "altr,socfpga-a10-perip-clk"; + clocks = <&periph_pll>; + reg = <0xF4>; + }; + + peri_sdmmc_clk: peri_sdmmc_clk { + #clock-cells = <0>; + compatible = "altr,socfpga-a10-perip-clk"; + clocks = <&periph_pll>; + reg = <0xF8>; + }; + + peri_s2f_usr0_clk: peri_s2f_usr0_clk { + #clock-cells = <0>; + compatible = "altr,socfpga-a10-perip-clk"; + clocks = <&periph_pll>; + reg = <0xFC>; + }; + + peri_s2f_usr1_clk: peri_s2f_usr1_clk { + #clock-cells = <0>; + compatible = "altr,socfpga-a10-perip-clk"; + clocks = <&periph_pll>; + reg = <0x100>; + }; + + peri_hmc_pll_ref_clk: peri_hmc_pll_ref_clk { + #clock-cells = <0>; + compatible = "altr,socfpga-a10-perip-clk"; + clocks = <&periph_pll>; + reg = <0x104>; + }; + }; + + mpu_free_clk: mpu_free_clk { + #clock-cells = <0>; + compatible = "altr,socfpga-a10-perip-clk"; + clocks = <&main_mpu_base_clk>, <&peri_mpu_base_clk>, + <&osc1>, <&cb_intosc_hs_div2_clk>, + <&f2s_free_clk>; + reg = <0x60>; + }; + + noc_free_clk: noc_free_clk { + #clock-cells = <0>; + compatible = "altr,socfpga-a10-perip-clk"; + clocks = <&main_noc_base_clk>, <&peri_noc_base_clk>, + <&osc1>, <&cb_intosc_hs_div2_clk>, + <&f2s_free_clk>; + reg = <0x64>; + }; + + s2f_user1_free_clk: s2f_user1_free_clk { + #clock-cells = <0>; + compatible = "altr,socfpga-a10-perip-clk"; + clocks = <&main_s2f_usr1_clk>, <&peri_s2f_usr1_clk>, + <&osc1>, <&cb_intosc_hs_div2_clk>, + <&f2s_free_clk>; + reg = <0x104>; + }; + + sdmmc_free_clk: sdmmc_free_clk { + #clock-cells = <0>; + compatible = "altr,socfpga-a10-perip-clk"; + clocks = <&main_sdmmc_clk>, <&peri_sdmmc_clk>, + <&osc1>, <&cb_intosc_hs_div2_clk>, + <&f2s_free_clk>; + fixed-divider = <4>; + reg = <0xF8>; + }; + + l4_sys_free_clk: l4_sys_free_clk { + #clock-cells = <0>; + compatible = "altr,socfpga-a10-perip-clk"; + clocks = <&noc_free_clk>; + fixed-divider = <4>; + }; + + l4_main_clk: l4_main_clk { + #clock-cells = <0>; + compatible = "altr,socfpga-a10-gate-clk"; + clocks = <&noc_free_clk>; + div-reg = <0xA8 0 2>; + clk-gate = <0x48 1>; + }; + + l4_mp_clk: l4_mp_clk { + #clock-cells = <0>; + compatible = "altr,socfpga-a10-gate-clk"; + clocks = <&noc_free_clk>; + div-reg = <0xA8 8 2>; + clk-gate = <0x48 2>; + }; + + l4_sp_clk: l4_sp_clk { + #clock-cells = <0>; + compatible = "altr,socfpga-a10-gate-clk"; + clocks = <&noc_free_clk>; + div-reg = <0xA8 16 2>; + clk-gate = <0x48 3>; + }; + + mpu_periph_clk: mpu_periph_clk { + #clock-cells = <0>; + compatible = "altr,socfpga-a10-gate-clk"; + clocks = <&mpu_free_clk>; + fixed-divider = <4>; + clk-gate = <0x48 0>; + }; + + sdmmc_clk: sdmmc_clk { + #clock-cells = <0>; + compatible = "altr,socfpga-a10-gate-clk"; + clocks = <&sdmmc_free_clk>; + clk-gate = <0xC8 5>; + }; + + qspi_clk: qspi_clk { + #clock-cells = <0>; + compatible = "altr,socfpga-a10-gate-clk"; + clocks = <&l4_main_clk>; + clk-gate = <0xC8 11>; + }; + + nand_clk: nand_clk { + #clock-cells = <0>; + compatible = "altr,socfpga-a10-gate-clk"; + clocks = <&l4_mp_clk>; + clk-gate = <0xC8 10>; + }; + + spi_m_clk: spi_m_clk { + #clock-cells = <0>; + compatible = "altr,socfpga-a10-gate-clk"; + clocks = <&l4_main_clk>; + clk-gate = <0xC8 9>; + }; + + usb_clk: usb_clk { + #clock-cells = <0>; + compatible = "altr,socfpga-a10-gate-clk"; + clocks = <&l4_mp_clk>; + clk-gate = <0xC8 8>; + }; + + s2f_usr1_clk: s2f_usr1_clk { + #clock-cells = <0>; + compatible = "altr,socfpga-a10-gate-clk"; + clocks = <&peri_s2f_usr1_clk>; + clk-gate = <0xC8 6>; }; }; }; gmac0: ethernet@ff800000 { compatible = "altr,socfpga-stmmac", "snps,dwmac-3.72a", "snps,dwmac"; + altr,sysmgr-syscon = <&sysmgr 0x44 0>; reg = <0xff800000 0x2000>; interrupts = <0 92 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "macirq"; /* Filled in by bootloader */ mac-address = [00 00 00 00 00 00]; + snps,multicast-filter-bins = <256>; + snps,perfect-filter-entries = <128>; + tx-fifo-depth = <4096>; + rx-fifo-depth = <16384>; + clocks = <&l4_mp_clk>; + clock-names = "stmmaceth"; status = "disabled"; }; gmac1: ethernet@ff802000 { compatible = "altr,socfpga-stmmac", "snps,dwmac-3.72a", "snps,dwmac"; + altr,sysmgr-syscon = <&sysmgr 0x48 0>; reg = <0xff802000 0x2000>; interrupts = <0 93 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "macirq"; /* Filled in by bootloader */ mac-address = [00 00 00 00 00 00]; + snps,multicast-filter-bins = <256>; + snps,perfect-filter-entries = <128>; + tx-fifo-depth = <4096>; + rx-fifo-depth = <16384>; + clocks = <&l4_mp_clk>; + clock-names = "stmmaceth"; status = "disabled"; }; gmac2: ethernet@ff804000 { compatible = "altr,socfpga-stmmac", "snps,dwmac-3.72a", "snps,dwmac"; + altr,sysmgr-syscon = <&sysmgr 0x4C 0>; reg = <0xff804000 0x2000>; interrupts = <0 94 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "macirq"; /* Filled in by bootloader */ mac-address = [00 00 00 00 00 00]; + snps,multicast-filter-bins = <256>; + snps,perfect-filter-entries = <128>; + tx-fifo-depth = <4096>; + rx-fifo-depth = <16384>; + clocks = <&l4_mp_clk>; + clock-names = "stmmaceth"; status = "disabled"; }; @@ -253,6 +548,17 @@ status = "disabled"; }; + sdr: sdr@ffc25000 { + compatible = "syscon"; + reg = <0xffcfb100 0x80>; + }; + + sdramedac { + compatible = "altr,sdram-edac-a10"; + altr,sdr-syscon = <&sdr>; + interrupts = <0 2 4>, <0 0 4>; + }; + L2: l2-cache@fffff000 { compatible = "arm,pl310-cache"; reg = <0xfffff000 0x1000>; @@ -268,6 +574,9 @@ reg = <0xff808000 0x1000>; interrupts = <0 98 IRQ_TYPE_LEVEL_HIGH>; fifo-depth = <0x400>; + clocks = <&l4_mp_clk>, <&sdmmc_free_clk>; + clock-names = "biu", "ciu"; + status = "disabled"; }; ocram: sram@ffe00000 { @@ -281,9 +590,15 @@ reg = <0xffd05000 0x100>; }; + scu: snoop-control-unit@ffffc000 { + compatible = "arm,cortex-a9-scu"; + reg = <0xffffc000 0x100>; + }; + sysmgr: sysmgr@ffd06000 { compatible = "altr,sys-mgr", "syscon"; reg = <0xffd06000 0x300>; + cpu1-start-addr = <0xffd06230>; }; /* Local timer */ @@ -291,30 +606,39 @@ compatible = "arm,cortex-a9-twd-timer"; reg = <0xffffc600 0x100>; interrupts = <1 13 0xf04>; + clocks = <&mpu_periph_clk>; }; timer0: timer0@ffc02700 { compatible = "snps,dw-apb-timer"; interrupts = <0 115 IRQ_TYPE_LEVEL_HIGH>; reg = <0xffc02700 0x100>; + clocks = <&l4_sp_clk>; + clock-names = "timer"; }; timer1: timer1@ffc02800 { compatible = "snps,dw-apb-timer"; interrupts = <0 116 IRQ_TYPE_LEVEL_HIGH>; reg = <0xffc02800 0x100>; + clocks = <&l4_sp_clk>; + clock-names = "timer"; }; timer2: timer2@ffd00000 { compatible = "snps,dw-apb-timer"; interrupts = <0 117 IRQ_TYPE_LEVEL_HIGH>; reg = <0xffd00000 0x100>; + clocks = <&l4_sys_free_clk>; + clock-names = "timer"; }; timer3: timer3@ffd00100 { compatible = "snps,dw-apb-timer"; interrupts = <0 118 IRQ_TYPE_LEVEL_HIGH>; reg = <0xffd01000 0x100>; + clocks = <&l4_sys_free_clk>; + clock-names = "timer"; }; uart0: serial0@ffc02000 { @@ -323,6 +647,7 @@ interrupts = <0 110 IRQ_TYPE_LEVEL_HIGH>; reg-shift = <2>; reg-io-width = <4>; + status = "disabled"; }; uart1: serial1@ffc02100 { @@ -331,6 +656,8 @@ interrupts = <0 111 IRQ_TYPE_LEVEL_HIGH>; reg-shift = <2>; reg-io-width = <4>; + clocks = <&l4_sp_clk>; + status = "disabled"; }; usbphy0: usbphy@0 { @@ -343,6 +670,8 @@ compatible = "snps,dwc2"; reg = <0xffb00000 0xffff>; interrupts = <0 95 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&usb_clk>; + clock-names = "otg"; phys = <&usbphy0>; phy-names = "usb2-phy"; status = "disabled"; @@ -361,6 +690,7 @@ compatible = "snps,dw-wdt"; reg = <0xffd00200 0x100>; interrupts = <0 119 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&l4_sys_free_clk>; status = "disabled"; }; @@ -368,6 +698,7 @@ compatible = "snps,dw-wdt"; reg = <0xffd00300 0x100>; interrupts = <0 120 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&l4_sys_free_clk>; status = "disabled"; }; }; diff --git a/arch/arm/boot/dts/socfpga_arria10_socdk.dtsi b/arch/arm/boot/dts/socfpga_arria10_socdk.dtsi new file mode 100644 index 000000000..94a0709b2 --- /dev/null +++ b/arch/arm/boot/dts/socfpga_arria10_socdk.dtsi @@ -0,0 +1,74 @@ +/* + * Copyright (C) 2015 Altera Corporation <www.altera.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ +#include "socfpga_arria10.dtsi" + +/ { + model = "Altera SOCFPGA Arria 10"; + compatible = "altr,socfpga-arria10", "altr,socfpga"; + + chosen { + bootargs = "console=ttyS0,115200 rootwait"; + }; + + memory { + name = "memory"; + device_type = "memory"; + reg = <0x0 0x40000000>; /* 1GB */ + }; + + soc { + clkmgr@ffd04000 { + clocks { + osc1 { + clock-frequency = <25000000>; + }; + }; + }; + }; +}; + +&gmac0 { + phy-mode = "rgmii"; + phy-addr = <0xffffffff>; /* probe for phy addr */ + + /* + * These skews assume the user's FPGA design is adding 600ps of delay + * for TX_CLK on Arria 10. + * + * All skews are offset since hardware skew values for the ksz9031 + * range from a negative skew to a positive skew. + * See the micrel-ksz90x1.txt Documentation file for details. + */ + txd0-skew-ps = <0>; /* -420ps */ + txd1-skew-ps = <0>; /* -420ps */ + txd2-skew-ps = <0>; /* -420ps */ + txd3-skew-ps = <0>; /* -420ps */ + rxd0-skew-ps = <420>; /* 0ps */ + rxd1-skew-ps = <420>; /* 0ps */ + rxd2-skew-ps = <420>; /* 0ps */ + rxd3-skew-ps = <420>; /* 0ps */ + txen-skew-ps = <0>; /* -420ps */ + txc-skew-ps = <1860>; /* 960ps */ + rxdv-skew-ps = <420>; /* 0ps */ + rxc-skew-ps = <1680>; /* 780ps */ + max-frame-size = <3800>; + status = "okay"; +}; + +&uart1 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/socfpga_arria10_socdk.dts b/arch/arm/boot/dts/socfpga_arria10_socdk_sdmmc.dts index 3015ce8d3..dbbb751ac 100755..100644 --- a/arch/arm/boot/dts/socfpga_arria10_socdk.dts +++ b/arch/arm/boot/dts/socfpga_arria10_socdk_sdmmc.dts @@ -1,5 +1,5 @@ /* - * Copyright (C) 2014 Altera Corporation <www.altera.com> + * Copyright (C) 2014-2015 Altera Corporation <www.altera.com> * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -16,33 +16,11 @@ */ /dts-v1/; -#include "socfpga_arria10.dtsi" +#include "socfpga_arria10_socdk.dtsi" -/ { - model = "Altera SOCFPGA Arria 10"; - compatible = "altr,socfpga-arria10", "altr,socfpga"; - - chosen { - bootargs = "console=ttyS0,115200 rootwait"; - }; - - memory { - name = "memory"; - device_type = "memory"; - reg = <0x0 0x40000000>; /* 1GB */ - }; - - soc { - clkmgr@ffd04000 { - clocks { - osc1 { - clock-frequency = <25000000>; - }; - }; - }; - - serial0@ffc02000 { - status = "okay"; - }; - }; +&mmc { + status = "okay"; + num-slots = <1>; + broken-cd; + bus-width = <4>; }; diff --git a/arch/arm/boot/dts/socfpga_cyclone5_sockit.dts b/arch/arm/boot/dts/socfpga_cyclone5_sockit.dts index 16ea6f5f2..5e17fd147 100644 --- a/arch/arm/boot/dts/socfpga_cyclone5_sockit.dts +++ b/arch/arm/boot/dts/socfpga_cyclone5_sockit.dts @@ -60,6 +60,22 @@ rxc-skew-ps = <2000>; }; +&gpio2 { + status = "okay"; +}; + +&i2c1 { + status = "okay"; + + accel1: accelerometer@53 { + compatible = "adi,adxl345"; + reg = <0x53>; + + interrupt-parent = <&portc>; + interrupts = <3 2>; + }; +}; + &mmc0 { vmmc-supply = <®ulator_3_3v>; vqmmc-supply = <®ulator_3_3v>; diff --git a/arch/arm/boot/dts/socfpga_cyclone5_socrates.dts b/arch/arm/boot/dts/socfpga_cyclone5_socrates.dts index a1814b457..019dd2fea 100644 --- a/arch/arm/boot/dts/socfpga_cyclone5_socrates.dts +++ b/arch/arm/boot/dts/socfpga_cyclone5_socrates.dts @@ -30,12 +30,23 @@ device_type = "memory"; reg = <0x0 0x40000000>; /* 1GB */ }; + + leds: gpio-leds { + }; }; &gmac1 { status = "okay"; }; +&gpio0 { + status = "okay"; +}; + +&gpio1 { + status = "okay"; +}; + &i2c0 { status = "okay"; @@ -45,6 +56,26 @@ }; }; +&leds { + compatible = "gpio-leds"; + + led@0 { + label = "led:green:heartbeat"; + gpios = <&porta 28 1>; + linux,default-trigger = "heartbeat"; + }; + + led@1 { + label = "led:green:D7"; + gpios = <&portb 19 1>; + }; + + led@2 { + label = "led:green:D8"; + gpios = <&portb 25 1>; + }; +}; + &mmc { status = "okay"; }; diff --git a/arch/arm/boot/dts/spear1310-evb.dts b/arch/arm/boot/dts/spear1310-evb.dts index d42c84b1d..e48857249 100644 --- a/arch/arm/boot/dts/spear1310-evb.dts +++ b/arch/arm/boot/dts/spear1310-evb.dts @@ -1,7 +1,7 @@ /* * DTS file for SPEAr1310 Evaluation Baord * - * Copyright 2012 Viresh Kumar <viresh.linux@gmail.com> + * Copyright 2012 Viresh Kumar <vireshk@kernel.org> * * The code contained herein is licensed under the GNU General Public * License. You may obtain a copy of the GNU General Public License diff --git a/arch/arm/boot/dts/spear1310.dtsi b/arch/arm/boot/dts/spear1310.dtsi index 9d3429206..54bc6d3cf 100644 --- a/arch/arm/boot/dts/spear1310.dtsi +++ b/arch/arm/boot/dts/spear1310.dtsi @@ -1,7 +1,7 @@ /* * DTS file for all SPEAr1310 SoCs * - * Copyright 2012 Viresh Kumar <viresh.linux@gmail.com> + * Copyright 2012 Viresh Kumar <vireshk@kernel.org> * * The code contained herein is licensed under the GNU General Public * License. You may obtain a copy of the GNU General Public License diff --git a/arch/arm/boot/dts/spear1340-evb.dts b/arch/arm/boot/dts/spear1340-evb.dts index b23e05ed1..c611f5606 100644 --- a/arch/arm/boot/dts/spear1340-evb.dts +++ b/arch/arm/boot/dts/spear1340-evb.dts @@ -1,7 +1,7 @@ /* * DTS file for SPEAr1340 Evaluation Baord * - * Copyright 2012 Viresh Kumar <viresh.linux@gmail.com> + * Copyright 2012 Viresh Kumar <vireshk@kernel.org> * * The code contained herein is licensed under the GNU General Public * License. You may obtain a copy of the GNU General Public License diff --git a/arch/arm/boot/dts/spear1340.dtsi b/arch/arm/boot/dts/spear1340.dtsi index 13e1aa33d..df2232d76 100644 --- a/arch/arm/boot/dts/spear1340.dtsi +++ b/arch/arm/boot/dts/spear1340.dtsi @@ -1,7 +1,7 @@ /* * DTS file for all SPEAr1340 SoCs * - * Copyright 2012 Viresh Kumar <viresh.linux@gmail.com> + * Copyright 2012 Viresh Kumar <vireshk@kernel.org> * * The code contained herein is licensed under the GNU General Public * License. You may obtain a copy of the GNU General Public License diff --git a/arch/arm/boot/dts/spear13xx.dtsi b/arch/arm/boot/dts/spear13xx.dtsi index 40accc87e..14594ce8c 100644 --- a/arch/arm/boot/dts/spear13xx.dtsi +++ b/arch/arm/boot/dts/spear13xx.dtsi @@ -1,7 +1,7 @@ /* * DTS file for all SPEAr13xx SoCs * - * Copyright 2012 Viresh Kumar <viresh.linux@gmail.com> + * Copyright 2012 Viresh Kumar <vireshk@kernel.org> * * The code contained herein is licensed under the GNU General Public * License. You may obtain a copy of the GNU General Public License diff --git a/arch/arm/boot/dts/spear300-evb.dts b/arch/arm/boot/dts/spear300-evb.dts index 5de143165..e859e8288 100644 --- a/arch/arm/boot/dts/spear300-evb.dts +++ b/arch/arm/boot/dts/spear300-evb.dts @@ -1,7 +1,7 @@ /* * DTS file for SPEAr300 Evaluation Baord * - * Copyright 2012 Viresh Kumar <viresh.linux@gmail.com> + * Copyright 2012 Viresh Kumar <vireshk@kernel.org> * * The code contained herein is licensed under the GNU General Public * License. You may obtain a copy of the GNU General Public License diff --git a/arch/arm/boot/dts/spear300.dtsi b/arch/arm/boot/dts/spear300.dtsi index f79b3dfaa..f4e92e599 100644 --- a/arch/arm/boot/dts/spear300.dtsi +++ b/arch/arm/boot/dts/spear300.dtsi @@ -1,7 +1,7 @@ /* * DTS file for SPEAr300 SoC * - * Copyright 2012 Viresh Kumar <viresh.linux@gmail.com> + * Copyright 2012 Viresh Kumar <vireshk@kernel.org> * * The code contained herein is licensed under the GNU General Public * License. You may obtain a copy of the GNU General Public License diff --git a/arch/arm/boot/dts/spear310-evb.dts b/arch/arm/boot/dts/spear310-evb.dts index b09632963..070f2c1b7 100644 --- a/arch/arm/boot/dts/spear310-evb.dts +++ b/arch/arm/boot/dts/spear310-evb.dts @@ -1,7 +1,7 @@ /* * DTS file for SPEAr310 Evaluation Baord * - * Copyright 2012 Viresh Kumar <viresh.linux@gmail.com> + * Copyright 2012 Viresh Kumar <vireshk@kernel.org> * * The code contained herein is licensed under the GNU General Public * License. You may obtain a copy of the GNU General Public License diff --git a/arch/arm/boot/dts/spear310.dtsi b/arch/arm/boot/dts/spear310.dtsi index 95372080e..da210b454 100644 --- a/arch/arm/boot/dts/spear310.dtsi +++ b/arch/arm/boot/dts/spear310.dtsi @@ -1,7 +1,7 @@ /* * DTS file for SPEAr310 SoC * - * Copyright 2012 Viresh Kumar <viresh.linux@gmail.com> + * Copyright 2012 Viresh Kumar <vireshk@kernel.org> * * The code contained herein is licensed under the GNU General Public * License. You may obtain a copy of the GNU General Public License diff --git a/arch/arm/boot/dts/spear320-evb.dts b/arch/arm/boot/dts/spear320-evb.dts index fdedbb514..1b1034477 100644 --- a/arch/arm/boot/dts/spear320-evb.dts +++ b/arch/arm/boot/dts/spear320-evb.dts @@ -1,7 +1,7 @@ /* * DTS file for SPEAr320 Evaluation Baord * - * Copyright 2012 Viresh Kumar <viresh.linux@gmail.com> + * Copyright 2012 Viresh Kumar <vireshk@kernel.org> * * The code contained herein is licensed under the GNU General Public * License. You may obtain a copy of the GNU General Public License diff --git a/arch/arm/boot/dts/spear320.dtsi b/arch/arm/boot/dts/spear320.dtsi index ffea342ae..22be6e5ed 100644 --- a/arch/arm/boot/dts/spear320.dtsi +++ b/arch/arm/boot/dts/spear320.dtsi @@ -1,7 +1,7 @@ /* * DTS file for SPEAr320 SoC * - * Copyright 2012 Viresh Kumar <viresh.linux@gmail.com> + * Copyright 2012 Viresh Kumar <vireshk@kernel.org> * * The code contained herein is licensed under the GNU General Public * License. You may obtain a copy of the GNU General Public License diff --git a/arch/arm/boot/dts/spear3xx.dtsi b/arch/arm/boot/dts/spear3xx.dtsi index f0e3fcf8e..118135d75 100644 --- a/arch/arm/boot/dts/spear3xx.dtsi +++ b/arch/arm/boot/dts/spear3xx.dtsi @@ -1,7 +1,7 @@ /* * DTS file for all SPEAr3xx SoCs * - * Copyright 2012 Viresh Kumar <viresh.linux@gmail.com> + * Copyright 2012 Viresh Kumar <vireshk@kernel.org> * * The code contained herein is licensed under the GNU General Public * License. You may obtain a copy of the GNU General Public License diff --git a/arch/arm/boot/dts/ste-ccu8540.dts b/arch/arm/boot/dts/ste-ccu8540.dts index 32dd55e5f..6eaaf638e 100644 --- a/arch/arm/boot/dts/ste-ccu8540.dts +++ b/arch/arm/boot/dts/ste-ccu8540.dts @@ -17,6 +17,13 @@ model = "ST-Ericsson U8540 platform with Device Tree"; compatible = "st-ericsson,ccu8540", "st-ericsson,u8540"; + /* This stablilizes the serial port enumeration */ + aliases { + serial0 = &ux500_serial0; + serial1 = &ux500_serial1; + serial2 = &ux500_serial2; + }; + memory@0 { device_type = "memory"; reg = <0x20000000 0x1f000000>, <0xc0000000 0x3f000000>; diff --git a/arch/arm/boot/dts/ste-ccu9540.dts b/arch/arm/boot/dts/ste-ccu9540.dts index 651c56d40..c8b815819 100644 --- a/arch/arm/boot/dts/ste-ccu9540.dts +++ b/arch/arm/boot/dts/ste-ccu9540.dts @@ -16,6 +16,13 @@ model = "ST-Ericsson CCU9540 platform with Device Tree"; compatible = "st-ericsson,ccu9540", "st-ericsson,u9540"; + /* This stablilizes the serial port enumeration */ + aliases { + serial0 = &ux500_serial0; + serial1 = &ux500_serial1; + serial2 = &ux500_serial2; + }; + memory { reg = <0x00000000 0x20000000>; }; diff --git a/arch/arm/boot/dts/ste-dbx5x0.dtsi b/arch/arm/boot/dts/ste-dbx5x0.dtsi index 2201cd5da..b8f81fb41 100644 --- a/arch/arm/boot/dts/ste-dbx5x0.dtsi +++ b/arch/arm/boot/dts/ste-dbx5x0.dtsi @@ -15,6 +15,33 @@ #include "skeleton.dtsi" / { + cpus { + #address-cells = <1>; + #size-cells = <0>; + enable-method = "ste,dbx500-smp"; + + cpu-map { + cluster0 { + core0 { + cpu = <&CPU0>; + }; + core1 { + cpu = <&CPU1>; + }; + }; + }; + CPU0: cpu@300 { + device_type = "cpu"; + compatible = "arm,cortex-a9"; + reg = <0x300>; + }; + CPU1: cpu@301 { + device_type = "cpu"; + compatible = "arm,cortex-a9"; + reg = <0x301>; + }; + }; + soc { #address-cells = <1>; #size-cells = <1>; @@ -22,6 +49,134 @@ interrupt-parent = <&intc>; ranges; + ptm@801ae000 { + compatible = "arm,coresight-etm3x", "arm,primecell"; + reg = <0x801ae000 0x1000>; + + clocks = <&prcmu_clk PRCMU_APETRACECLK>, <&prcmu_clk PRCMU_APEATCLK>; + clock-names = "apb_pclk", "atclk"; + cpu = <&CPU0>; + port { + ptm0_out_port: endpoint { + remote-endpoint = <&funnel_in_port0>; + }; + }; + }; + + ptm@801af000 { + compatible = "arm,coresight-etm3x", "arm,primecell"; + reg = <0x801af000 0x1000>; + + clocks = <&prcmu_clk PRCMU_APETRACECLK>, <&prcmu_clk PRCMU_APEATCLK>; + clock-names = "apb_pclk", "atclk"; + cpu = <&CPU1>; + port { + ptm1_out_port: endpoint { + remote-endpoint = <&funnel_in_port1>; + }; + }; + }; + + funnel@801a6000 { + compatible = "arm,coresight-funnel", "arm,primecell"; + reg = <0x801a6000 0x1000>; + + clocks = <&prcmu_clk PRCMU_APETRACECLK>, <&prcmu_clk PRCMU_APEATCLK>; + clock-names = "apb_pclk", "atclk"; + ports { + #address-cells = <1>; + #size-cells = <0>; + + /* funnel output ports */ + port@0 { + reg = <0>; + funnel_out_port: endpoint { + remote-endpoint = + <&replicator_in_port0>; + }; + }; + + /* funnel input ports */ + port@1 { + reg = <0>; + funnel_in_port0: endpoint { + slave-mode; + remote-endpoint = <&ptm0_out_port>; + }; + }; + + port@2 { + reg = <1>; + funnel_in_port1: endpoint { + slave-mode; + remote-endpoint = <&ptm1_out_port>; + }; + }; + }; + }; + + replicator { + compatible = "arm,coresight-replicator"; + clocks = <&prcmu_clk PRCMU_APEATCLK>; + clock-names = "atclk"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + /* replicator output ports */ + port@0 { + reg = <0>; + replicator_out_port0: endpoint { + remote-endpoint = <&tpiu_in_port>; + }; + }; + port@1 { + reg = <1>; + replicator_out_port1: endpoint { + remote-endpoint = <&etb_in_port>; + }; + }; + + /* replicator input port */ + port@2 { + reg = <0>; + replicator_in_port0: endpoint { + slave-mode; + remote-endpoint = <&funnel_out_port>; + }; + }; + }; + }; + + tpiu@80190000 { + compatible = "arm,coresight-tpiu", "arm,primecell"; + reg = <0x80190000 0x1000>; + + clocks = <&prcmu_clk PRCMU_APETRACECLK>, <&prcmu_clk PRCMU_APEATCLK>; + clock-names = "apb_pclk", "atclk"; + port { + tpiu_in_port: endpoint { + slave-mode; + remote-endpoint = <&replicator_out_port0>; + }; + }; + }; + + etb@801a4000 { + compatible = "arm,coresight-etb10", "arm,primecell"; + reg = <0x801a4000 0x1000>; + + clocks = <&prcmu_clk PRCMU_APETRACECLK>, <&prcmu_clk PRCMU_APEATCLK>; + clock-names = "apb_pclk", "atclk"; + port { + etb_in_port: endpoint { + slave-mode; + remote-endpoint = <&replicator_out_port1>; + }; + }; + }; + intc: interrupt-controller@a0411000 { compatible = "arm,cortex-a9-gic"; #interrupt-cells = <3>; @@ -31,6 +186,20 @@ <0xa0410100 0x100>; }; + scu@a04100000 { + compatible = "arm,cortex-a9-scu"; + reg = <0xa0410000 0x100>; + }; + + /* + * The backup RAM is used for retention during sleep + * and various things like spin tables + */ + backupram@80150000 { + compatible = "ste,dbx500-backupram"; + reg = <0x80150000 0x2000>; + }; + L2: l2-cache { compatible = "arm,pl310-cache"; reg = <0xa0412000 0x1000>; @@ -91,6 +260,13 @@ clocks = <&smp_twd_clk>; }; + watchdog@a0410620 { + compatible = "arm,cortex-a9-twd-wdt"; + reg = <0xa0410620 0x20>; + interrupts = <1 14 0x304>; + clocks = <&smp_twd_clk>; + }; + rtc@80154000 { compatible = "arm,rtc-pl031", "arm,primecell"; reg = <0x80154000 0x1000>; @@ -796,7 +972,7 @@ power-domains = <&pm_domains DOMAIN_VAPE>; }; - uart@80120000 { + ux500_serial0: uart@80120000 { compatible = "arm,pl011", "arm,primecell"; reg = <0x80120000 0x1000>; interrupts = <0 11 IRQ_TYPE_LEVEL_HIGH>; @@ -811,7 +987,7 @@ status = "disabled"; }; - uart@80121000 { + ux500_serial1: uart@80121000 { compatible = "arm,pl011", "arm,primecell"; reg = <0x80121000 0x1000>; interrupts = <0 19 IRQ_TYPE_LEVEL_HIGH>; @@ -826,7 +1002,7 @@ status = "disabled"; }; - uart@80007000 { + ux500_serial2: uart@80007000 { compatible = "arm,pl011", "arm,primecell"; reg = <0x80007000 0x1000>; interrupts = <0 26 IRQ_TYPE_LEVEL_HIGH>; diff --git a/arch/arm/boot/dts/ste-href-stuib.dtsi b/arch/arm/boot/dts/ste-href-stuib.dtsi index 7d4f8184c..78b75256c 100644 --- a/arch/arm/boot/dts/ste-href-stuib.dtsi +++ b/arch/arm/boot/dts/ste-href-stuib.dtsi @@ -77,6 +77,34 @@ }; }; + /* Sensors mounted on this board variant */ + i2c@80128000 { + lis331dl@1c { + /* Accelerometer */ + compatible = "st,lis331dl-accel"; + st,drdy-int-pin = <1>; + reg = <0x1c>; + vdd-supply = <&ab8500_ldo_aux1_reg>; + vddio-supply = <&db8500_vsmps2_reg>; + pinctrl-names = "default"; + pinctrl-0 = <&accel_stuib_mode>; + interrupt-parent = <&gpio2>; + interrupts = <18 IRQ_TYPE_EDGE_RISING>, + <19 IRQ_TYPE_EDGE_RISING>; + }; + ak8974@0f { + /* Magnetometer */ + compatible = "asahi-kasei,ak8974"; + reg = <0x0f>; + vdd-supply = <&ab8500_ldo_aux1_reg>; + vddio-supply = <&db8500_vsmps2_reg>; + pinctrl-names = "default"; + pinctrl-0 = <&magneto_stuib_mode>; + interrupt-parent = <&gpio1>; + interrupts = <0 IRQ_TYPE_EDGE_RISING>; + }; + }; + i2c@80110000 { bu21013_tp@5c { compatible = "rohm,bu21013_tp"; @@ -116,6 +144,28 @@ }; }; }; + accelerometer { + accel_stuib_mode: accel_stuib { + /* Accelerometer interrupt lines 1 & 2 */ + stuib_cfg { + pins = "GPIO82_C1", "GPIO83_D3"; + ste,config = <&gpio_in_pu>; + }; + }; + }; + magnetometer { + magneto_stuib_mode: magneto_stuib { + /* Magnetometer uses GPIO 31 and 32, pull these up/down respectively */ + stuib_cfg1 { + pins = "GPIO31_V3"; + ste,config = <&gpio_in_pu>; + }; + stuib_cfg2 { + pins = "GPIO32_V2"; + ste,config = <&gpio_in_pd>; + }; + }; + }; }; }; }; diff --git a/arch/arm/boot/dts/ste-href-tvk1281618.dtsi b/arch/arm/boot/dts/ste-href-tvk1281618.dtsi index 062c6aae3..0e1c96943 100644 --- a/arch/arm/boot/dts/ste-href-tvk1281618.dtsi +++ b/arch/arm/boot/dts/ste-href-tvk1281618.dtsi @@ -99,10 +99,13 @@ vddio-supply = <&db8500_vsmps2_reg>; pinctrl-names = "default"; pinctrl-0 = <&accel_tvk_mode>; + interrupt-parent = <&gpio2>; + interrupts = <18 IRQ_TYPE_EDGE_RISING>, + <19 IRQ_TYPE_EDGE_RISING>; }; - lsm303dlm@1e { + lsm303dlh@1e { /* Magnetometer */ - compatible = "st,lsm303dlm-magn"; + compatible = "st,lsm303dlh-magn"; reg = <0x1e>; vdd-supply = <&ab8500_ldo_aux1_reg>; vddio-supply = <&db8500_vsmps2_reg>; diff --git a/arch/arm/boot/dts/ste-href.dtsi b/arch/arm/boot/dts/ste-href.dtsi index 744c1e3a7..6d8ce1543 100644 --- a/arch/arm/boot/dts/ste-href.dtsi +++ b/arch/arm/boot/dts/ste-href.dtsi @@ -32,11 +32,11 @@ status = "okay"; }; + /* This UART is unused and thus left disabled */ uart@80121000 { pinctrl-names = "default", "sleep"; pinctrl-0 = <&uart1_default_mode>; pinctrl-1 = <&uart1_sleep_mode>; - status = "okay"; }; uart@80007000 { diff --git a/arch/arm/boot/dts/ste-hrefprev60-stuib.dts b/arch/arm/boot/dts/ste-hrefprev60-stuib.dts index 2b1cb5b58..18e9795a9 100644 --- a/arch/arm/boot/dts/ste-hrefprev60-stuib.dts +++ b/arch/arm/boot/dts/ste-hrefprev60-stuib.dts @@ -17,6 +17,13 @@ model = "ST-Ericsson HREF (pre-v60) and ST UIB"; compatible = "st-ericsson,mop500", "st-ericsson,u8500"; + /* This stablilizes the serial port enumeration */ + aliases { + serial0 = &ux500_serial0; + serial1 = &ux500_serial1; + serial2 = &ux500_serial2; + }; + soc { /* Reset line for the BU21013 touchscreen */ i2c@80110000 { diff --git a/arch/arm/boot/dts/ste-hrefprev60-tvk.dts b/arch/arm/boot/dts/ste-hrefprev60-tvk.dts index 59523f866..24739914e 100644 --- a/arch/arm/boot/dts/ste-hrefprev60-tvk.dts +++ b/arch/arm/boot/dts/ste-hrefprev60-tvk.dts @@ -16,4 +16,11 @@ / { model = "ST-Ericsson HREF (pre-v60) and TVK1281618 UIB"; compatible = "st-ericsson,mop500", "st-ericsson,u8500"; + + /* This stablilizes the serial port enumeration */ + aliases { + serial0 = &ux500_serial0; + serial1 = &ux500_serial1; + serial2 = &ux500_serial2; + }; }; diff --git a/arch/arm/boot/dts/ste-hrefprev60.dtsi b/arch/arm/boot/dts/ste-hrefprev60.dtsi index 7f3975b58..b0278f4c4 100644 --- a/arch/arm/boot/dts/ste-hrefprev60.dtsi +++ b/arch/arm/boot/dts/ste-hrefprev60.dtsi @@ -23,6 +23,11 @@ }; soc { + /* Enable UART1 on this board */ + uart@80121000 { + status = "okay"; + }; + i2c@80004000 { tps61052@33 { compatible = "tps61052"; diff --git a/arch/arm/boot/dts/ste-hrefv60plus-stuib.dts b/arch/arm/boot/dts/ste-hrefv60plus-stuib.dts index 8c6a2de56..c2e1ba019 100644 --- a/arch/arm/boot/dts/ste-hrefv60plus-stuib.dts +++ b/arch/arm/boot/dts/ste-hrefv60plus-stuib.dts @@ -19,6 +19,13 @@ model = "ST-Ericsson HREF (v60+) and ST UIB"; compatible = "st-ericsson,hrefv60+", "st-ericsson,u8500"; + /* This stablilizes the serial port enumeration */ + aliases { + serial0 = &ux500_serial0; + serial1 = &ux500_serial1; + serial2 = &ux500_serial2; + }; + soc { /* Reset line for the BU21013 touchscreen */ i2c@80110000 { diff --git a/arch/arm/boot/dts/ste-hrefv60plus-tvk.dts b/arch/arm/boot/dts/ste-hrefv60plus-tvk.dts index d53cccdce..ebd8547e9 100644 --- a/arch/arm/boot/dts/ste-hrefv60plus-tvk.dts +++ b/arch/arm/boot/dts/ste-hrefv60plus-tvk.dts @@ -18,4 +18,11 @@ / { model = "ST-Ericsson HREF (v60+) and TVK1281618 UIB"; compatible = "st-ericsson,hrefv60+", "st-ericsson,u8500"; + + /* This stablilizes the serial port enumeration */ + aliases { + serial0 = &ux500_serial0; + serial1 = &ux500_serial1; + serial2 = &ux500_serial2; + }; }; diff --git a/arch/arm/boot/dts/ste-hrefv60plus.dtsi b/arch/arm/boot/dts/ste-hrefv60plus.dtsi index a4bc9e77d..810cda743 100644 --- a/arch/arm/boot/dts/ste-hrefv60plus.dtsi +++ b/arch/arm/boot/dts/ste-hrefv60plus.dtsi @@ -43,15 +43,26 @@ <&vaudio_hf_hrefv60_mode>, <&gbf_hrefv60_mode>, <&hdtv_hrefv60_mode>, - <&touch_hrefv60_mode>; + <&touch_hrefv60_mode>, + <&gpios_hrefv60_mode>; sdi0 { - /* SD card detect GPIO pin, extend default state */ sdi0_default_mode: sdi0_default { + /* SD card detect GPIO pin, extend default state */ default_hrefv60_cfg1 { pins = "GPIO95_E8"; ste,config = <&gpio_in_pu>; }; + /* VMMCI level-shifter enable */ + default_hrefv60_cfg2 { + pins = "GPIO169_D22"; + ste,config = <&gpio_out_lo>; + }; + /* VMMCI level-shifter voltage select */ + default_hrefv60_cfg3 { + pins = "GPIO5_AG6"; + ste,config = <&gpio_out_hi>; + }; }; }; ipgpio { @@ -213,6 +224,16 @@ }; }; }; + gpios { + /* Dangling GPIO pins */ + gpios_hrefv60_mode: gpios_hrefv60 { + default_cfg1 { + /* Normally UART1 RXD, now dangling */ + pins = "GPIO4_AH6"; + ste,config = <&in_pu>; + }; + }; + }; }; }; }; diff --git a/arch/arm/boot/dts/ste-nomadik-nhk15.dts b/arch/arm/boot/dts/ste-nomadik-nhk15.dts index 3d0b8755c..3d25dba14 100644 --- a/arch/arm/boot/dts/ste-nomadik-nhk15.dts +++ b/arch/arm/boot/dts/ste-nomadik-nhk15.dts @@ -17,6 +17,7 @@ }; aliases { + serial1 = &uart1; stmpe-i2c0 = &stmpe0; stmpe-i2c1 = &stmpe1; }; diff --git a/arch/arm/boot/dts/ste-nomadik-s8815.dts b/arch/arm/boot/dts/ste-nomadik-s8815.dts index 85d3b95df..3c140d05f 100644 --- a/arch/arm/boot/dts/ste-nomadik-s8815.dts +++ b/arch/arm/boot/dts/ste-nomadik-s8815.dts @@ -15,6 +15,10 @@ bootargs = "root=/dev/ram0 console=ttyAMA1,115200n8 earlyprintk"; }; + aliases { + serial1 = &uart1; + }; + src@101e0000 { /* These chrystal drivers are not used on this board */ disable-sxtalo; diff --git a/arch/arm/boot/dts/ste-nomadik-stn8815.dtsi b/arch/arm/boot/dts/ste-nomadik-stn8815.dtsi index f182f6538..ef794a33b 100644 --- a/arch/arm/boot/dts/ste-nomadik-stn8815.dtsi +++ b/arch/arm/boot/dts/ste-nomadik-stn8815.dtsi @@ -722,8 +722,9 @@ reg = <0x1a>; }; lis3lv02dl@1d { - compatible = "st,lis3lv02dl"; - reg = <0x1d>; + /* Accelerometer */ + compatible = "st,lis3lv02dl-accel"; + reg = <0x1d>; }; }; @@ -756,6 +757,7 @@ clock-names = "uartclk", "apb_pclk"; pinctrl-names = "default"; pinctrl-0 = <&uart0_default_mux>; + status = "disabled"; }; uart1: uart@101fb000 { diff --git a/arch/arm/boot/dts/ste-snowball.dts b/arch/arm/boot/dts/ste-snowball.dts index 1bc84ebdc..32a5ccb14 100644 --- a/arch/arm/boot/dts/ste-snowball.dts +++ b/arch/arm/boot/dts/ste-snowball.dts @@ -18,6 +18,13 @@ model = "Calao Systems Snowball platform with device tree"; compatible = "calaosystems,snowball-a9500", "st-ericsson,u9500"; + /* This stablilizes the serial port enumeration */ + aliases { + serial0 = &ux500_serial0; + serial1 = &ux500_serial1; + serial2 = &ux500_serial2; + }; + memory { reg = <0x00000000 0x20000000>; }; @@ -223,11 +230,11 @@ status = "okay"; }; + /* This UART is unused and thus left disabled */ uart@80121000 { pinctrl-names = "default", "sleep"; pinctrl-0 = <&uart1_default_mode>; pinctrl-1 = <&uart1_sleep_mode>; - status = "okay"; }; uart@80007000 { @@ -262,15 +269,19 @@ vddio-supply = <&db8500_vsmps2_reg>; pinctrl-names = "default"; pinctrl-0 = <&accel_snowball_mode>; + interrupt-parent = <&gpio5>; + interrupts = <3 IRQ_TYPE_EDGE_RISING>, /* INT1 */ + <4 IRQ_TYPE_EDGE_RISING>; /* INT2 */ }; - lsm303dlm@1e { + lsm303dlh@1e { /* Magnetometer */ - compatible = "st,lsm303dlm-magn"; + compatible = "st,lsm303dlh-magn"; reg = <0x1e>; vdd-supply = <&ab8500_ldo_aux1_reg>; vddio-supply = <&db8500_vsmps2_reg>; pinctrl-names = "default"; pinctrl-0 = <&magneto_snowball_mode>; + gpios = <&gpio5 5 0x4>; /* DRDY line */ }; l3g4200d@68 { /* Gyroscope */ @@ -279,6 +290,11 @@ reg = <0x68>; vdd-supply = <&ab8500_ldo_aux1_reg>; vddio-supply = <&db8500_vsmps2_reg>; + pinctrl-names = "default"; + pinctrl-0 = <&gyro_snowball_mode>; + gpios = <&gpio5 6 0x4>; /* DRDY line */ + interrupt-parent = <&gpio5>; + interrupts = <9 IRQ_TYPE_EDGE_RISING>; /* INT1 */ }; lsp001wm@5c { /* Barometer/pressure sensor */ @@ -443,7 +459,21 @@ pins = "GPIO21_AB3"; /* DAT31DIR */ ste,config = <&out_hi>; }; - + /* SD card detect GPIO pin, extend default state */ + snowball_cfg2 { + pins = "GPIO218_AH11"; + ste,config = <&gpio_in_pu>; + }; + /* VMMCI level-shifter enable */ + snowball_cfg3 { + pins = "GPIO217_AH12"; + ste,config = <&gpio_out_lo>; + }; + /* VMMCI level-shifter voltage select */ + snowball_cfg4 { + pins = "GPIO228_AJ6"; + ste,config = <&gpio_out_hi>; + }; }; }; ssp0 { @@ -489,6 +519,16 @@ }; }; }; + gyro { + gyro_snowball_mode: gyro_snowball { + snowball_cfg1 { + pins = + "GPIO166_A22", /* DRDY */ + "GPIO169_D22"; /* INT */ + ste,config = <&gpio_in_pu>; + }; + }; + }; magnetometer { magneto_snowball_mode: magneto_snowball { snowball_cfg1 { diff --git a/arch/arm/boot/dts/stih407-b2120.dts b/arch/arm/boot/dts/stih407-b2120.dts index af487145c..6d93475be 100644 --- a/arch/arm/boot/dts/stih407-b2120.dts +++ b/arch/arm/boot/dts/stih407-b2120.dts @@ -7,8 +7,8 @@ * published by the Free Software Foundation. */ /dts-v1/; -#include "stihxxx-b2120.dtsi" #include "stih407.dtsi" +#include "stihxxx-b2120.dtsi" / { model = "STiH407 B2120"; compatible = "st,stih407-b2120", "st,stih407"; diff --git a/arch/arm/boot/dts/stih407-family.dtsi b/arch/arm/boot/dts/stih407-family.dtsi index c06a54681..838b812cb 100644 --- a/arch/arm/boot/dts/stih407-family.dtsi +++ b/arch/arm/boot/dts/stih407-family.dtsi @@ -7,7 +7,10 @@ * publishhed by the Free Software Foundation. */ #include "stih407-pinctrl.dtsi" +#include <dt-bindings/mfd/st-lpc.h> +#include <dt-bindings/phy/phy.h> #include <dt-bindings/reset-controller/stih407-resets.h> +#include <dt-bindings/interrupt-controller/irq-st.h> / { #address-cells = <1>; #size-cells = <1>; @@ -56,6 +59,12 @@ cache-level = <2>; }; + arm-pmu { + interrupt-parent = <&intc>; + compatible = "arm,cortex-a9-pmu"; + interrupts = <GIC_PPI 15 IRQ_TYPE_LEVEL_HIGH>; + }; + soc { #address-cells = <1>; #size-cells = <1>; @@ -63,6 +72,12 @@ ranges; compatible = "simple-bus"; + restart { + compatible = "st,stih407-restart"; + st,syscfg = <&syscfg_sbc_reg>; + status = "okay"; + }; + powerdown: powerdown-controller { compatible = "st,stih407-powerdown"; #reset-cells = <1>; @@ -113,6 +128,15 @@ reg = <0x94b5100 0x1000>; }; + irq-syscfg { + compatible = "st,stih407-irq-syscfg"; + st,syscfg = <&syscfg_core>; + st,irq-device = <ST_IRQ_SYSCFG_PMU_0>, + <ST_IRQ_SYSCFG_PMU_1>; + st,fiq-device = <ST_IRQ_SYSCFG_DISABLED>, + <ST_IRQ_SYSCFG_DISABLED>; + }; + serial@9830000 { compatible = "st,asc"; reg = <0x9830000 0x2c>; @@ -280,7 +304,7 @@ #phy-cells = <0>; st,syscfg = <&syscfg_core 0x100 0xf4>; resets = <&softreset STIH407_PICOPHY_SOFTRESET>, - <&picophyreset STIH407_PICOPHY0_RESET>; + <&picophyreset STIH407_PICOPHY2_RESET>; reset-names = "global", "port"; }; @@ -336,5 +360,210 @@ resets = <&softreset STIH407_MIPHY2_SOFTRESET>; }; }; + + spi@9840000 { + compatible = "st,comms-ssc4-spi"; + reg = <0x9840000 0x110>; + interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk_s_c0_flexgen CLK_EXT2F_A9>; + clock-names = "ssc"; + pinctrl-0 = <&pinctrl_spi0_default>; + pinctrl-names = "default"; + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + }; + + spi@9841000 { + compatible = "st,comms-ssc4-spi"; + reg = <0x9841000 0x110>; + interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk_s_c0_flexgen CLK_EXT2F_A9>; + clock-names = "ssc"; + + status = "disabled"; + }; + + spi@9842000 { + compatible = "st,comms-ssc4-spi"; + reg = <0x9842000 0x110>; + interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk_s_c0_flexgen CLK_EXT2F_A9>; + clock-names = "ssc"; + + status = "disabled"; + }; + + spi@9843000 { + compatible = "st,comms-ssc4-spi"; + reg = <0x9843000 0x110>; + interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk_s_c0_flexgen CLK_EXT2F_A9>; + clock-names = "ssc"; + + status = "disabled"; + }; + + spi@9844000 { + compatible = "st,comms-ssc4-spi"; + reg = <0x9844000 0x110>; + interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk_s_c0_flexgen CLK_EXT2F_A9>; + clock-names = "ssc"; + + status = "disabled"; + }; + + /* SBC SSC */ + spi@9540000 { + compatible = "st,comms-ssc4-spi"; + reg = <0x9540000 0x110>; + interrupts = <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk_sysin>; + clock-names = "ssc"; + + status = "disabled"; + }; + + spi@9541000 { + compatible = "st,comms-ssc4-spi"; + reg = <0x9541000 0x110>; + interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk_sysin>; + clock-names = "ssc"; + + status = "disabled"; + }; + + spi@9542000 { + compatible = "st,comms-ssc4-spi"; + reg = <0x9542000 0x110>; + interrupts = <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk_sysin>; + clock-names = "ssc"; + + status = "disabled"; + }; + + mmc0: sdhci@09060000 { + compatible = "st,sdhci-stih407", "st,sdhci"; + status = "disabled"; + reg = <0x09060000 0x7ff>, <0x9061008 0x20>; + reg-names = "mmc", "top-mmc-delay"; + interrupts = <GIC_SPI 92 IRQ_TYPE_NONE>; + interrupt-names = "mmcirq"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_mmc0>; + clock-names = "mmc"; + clocks = <&clk_s_c0_flexgen CLK_MMC_0>; + bus-width = <8>; + non-removable; + }; + + mmc1: sdhci@09080000 { + compatible = "st,sdhci-stih407", "st,sdhci"; + status = "disabled"; + reg = <0x09080000 0x7ff>; + reg-names = "mmc"; + interrupts = <GIC_SPI 90 IRQ_TYPE_NONE>; + interrupt-names = "mmcirq"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_sd1>; + clock-names = "mmc"; + clocks = <&clk_s_c0_flexgen CLK_MMC_1>; + resets = <&softreset STIH407_MMC1_SOFTRESET>; + bus-width = <4>; + }; + + /* Watchdog and Real-Time Clock */ + lpc@8787000 { + compatible = "st,stih407-lpc"; + reg = <0x8787000 0x1000>; + interrupts = <GIC_SPI 129 IRQ_TYPE_EDGE_RISING>; + clocks = <&clk_s_d3_flexgen CLK_LPC_0>; + timeout-sec = <120>; + st,syscfg = <&syscfg_core>; + st,lpc-mode = <ST_LPC_MODE_WDT>; + }; + + lpc@8788000 { + compatible = "st,stih407-lpc"; + reg = <0x8788000 0x1000>; + interrupts = <GIC_SPI 130 IRQ_TYPE_EDGE_RISING>; + clocks = <&clk_s_d3_flexgen CLK_LPC_1>; + st,lpc-mode = <ST_LPC_MODE_RTC>; + }; + + sata0: sata@9b20000 { + compatible = "st,ahci"; + reg = <0x9b20000 0x1000>; + + interrupts = <GIC_SPI 159 IRQ_TYPE_NONE>; + interrupt-names = "hostc"; + + phys = <&phy_port0 PHY_TYPE_SATA>; + phy-names = "ahci_phy"; + + resets = <&powerdown STIH407_SATA0_POWERDOWN>, + <&softreset STIH407_SATA0_SOFTRESET>, + <&softreset STIH407_SATA0_PWR_SOFTRESET>; + reset-names = "pwr-dwn", "sw-rst", "pwr-rst"; + + clock-names = "ahci_clk"; + clocks = <&clk_s_c0_flexgen CLK_ICN_REG>; + + status = "disabled"; + }; + + sata1: sata@9b28000 { + compatible = "st,ahci"; + reg = <0x9b28000 0x1000>; + + interrupts = <GIC_SPI 170 IRQ_TYPE_NONE>; + interrupt-names = "hostc"; + + phys = <&phy_port1 PHY_TYPE_SATA>; + phy-names = "ahci_phy"; + + resets = <&powerdown STIH407_SATA1_POWERDOWN>, + <&softreset STIH407_SATA1_SOFTRESET>, + <&softreset STIH407_SATA1_PWR_SOFTRESET>; + reset-names = "pwr-dwn", + "sw-rst", + "pwr-rst"; + + clock-names = "ahci_clk"; + clocks = <&clk_s_c0_flexgen CLK_ICN_REG>; + + status = "disabled"; + }; + + st_dwc3: dwc3@8f94000 { + compatible = "st,stih407-dwc3"; + reg = <0x08f94000 0x1000>, <0x110 0x4>; + reg-names = "reg-glue", "syscfg-reg"; + st,syscfg = <&syscfg_core>; + resets = <&powerdown STIH407_USB3_POWERDOWN>, + <&softreset STIH407_MIPHY2_SOFTRESET>; + reset-names = "powerdown", "softreset"; + #address-cells = <1>; + #size-cells = <1>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usb3>; + ranges; + + status = "disabled"; + + dwc3: dwc3@9900000 { + compatible = "snps,dwc3"; + reg = <0x09900000 0x100000>; + interrupts = <GIC_SPI 155 IRQ_TYPE_NONE>; + dr_mode = "host"; + phy-names = "usb2-phy", "usb3-phy"; + phys = <&usb2_picophy0>, + <&phy_port2 PHY_TYPE_USB3>; + }; + }; }; }; diff --git a/arch/arm/boot/dts/stih407-pinctrl.dtsi b/arch/arm/boot/dts/stih407-pinctrl.dtsi index 402844cb3..0a754f275 100644 --- a/arch/arm/boot/dts/stih407-pinctrl.dtsi +++ b/arch/arm/boot/dts/stih407-pinctrl.dtsi @@ -104,6 +104,7 @@ #interrupt-cells = <2>; reg = <0x5000 0x100>; st,bank-name = "PIO5"; + st,retime-pin-mask = <0x3f>; }; rc { @@ -519,6 +520,7 @@ #interrupt-cells = <2>; reg = <0x5000 0x100>; st,bank-name = "PIO35"; + st,retime-pin-mask = <0x7f>; }; i2c4 { diff --git a/arch/arm/boot/dts/stih407.dtsi b/arch/arm/boot/dts/stih407.dtsi index 3efa3b2eb..2c560fc30 100644 --- a/arch/arm/boot/dts/stih407.dtsi +++ b/arch/arm/boot/dts/stih407.dtsi @@ -147,5 +147,33 @@ }; }; }; + + /* COMMS PWM Module */ + pwm0: pwm@9810000 { + compatible = "st,sti-pwm"; + status = "disabled"; + #pwm-cells = <2>; + reg = <0x9810000 0x68>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm0_chan0_default>; + clock-names = "pwm"; + clocks = <&clk_sysin>; + }; + + /* SBC PWM Module */ + pwm1: pwm@9510000 { + compatible = "st,sti-pwm"; + status = "disabled"; + #pwm-cells = <2>; + reg = <0x9510000 0x68>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm1_chan0_default + &pinctrl_pwm1_chan1_default + &pinctrl_pwm1_chan2_default + &pinctrl_pwm1_chan3_default>; + clock-names = "pwm"; + clocks = <&clk_sysin>; + st,pwm-num-chan = <4>; + }; }; }; diff --git a/arch/arm/boot/dts/stih410-b2120.dts b/arch/arm/boot/dts/stih410-b2120.dts index 2f61a9960..16f02c5e3 100644 --- a/arch/arm/boot/dts/stih410-b2120.dts +++ b/arch/arm/boot/dts/stih410-b2120.dts @@ -26,4 +26,14 @@ aliases { ttyAS0 = &sbc_serial0; }; + + soc { + + mmc0: sdhci@09060000 { + max-frequency = <200000000>; + sd-uhs-sdr50; + sd-uhs-sdr104; + sd-uhs-ddr50; + }; + }; }; diff --git a/arch/arm/boot/dts/stih416-b2020e.dts b/arch/arm/boot/dts/stih416-b2020e.dts index 961799e1d..f1ceee192 100644 --- a/arch/arm/boot/dts/stih416-b2020e.dts +++ b/arch/arm/boot/dts/stih416-b2020e.dts @@ -51,5 +51,15 @@ sata0: sata@fe380000{ status = "okay"; }; + + /* SAS PWM Module */ + pwm0: pwm@fed10000 { + status = "okay"; + }; + + /* SBC PWM Module */ + pwm1: pwm@fe510000 { + status = "okay"; + }; }; }; diff --git a/arch/arm/boot/dts/stih416-pinctrl.dtsi b/arch/arm/boot/dts/stih416-pinctrl.dtsi index 9cccf2d6a..051fc16f3 100644 --- a/arch/arm/boot/dts/stih416-pinctrl.dtsi +++ b/arch/arm/boot/dts/stih416-pinctrl.dtsi @@ -216,6 +216,29 @@ }; }; }; + + pwm1 { + pinctrl_pwm1_chan0_default: pwm1-0-default { + st,pins { + pwm-out = <&pio3 0 ALT1 OUT>; + }; + }; + pinctrl_pwm1_chan1_default: pwm1-1-default { + st,pins { + pwm-out = <&pio4 4 ALT1 OUT>; + }; + }; + pinctrl_pwm1_chan2_default: pwm1-2-default { + st,pins { + pwm-out = <&pio4 6 ALT3 OUT>; + }; + }; + pinctrl_pwm1_chan3_default: pwm1-3-default { + st,pins { + pwm-out = <&pio4 7 ALT3 OUT>; + }; + }; + }; }; pin-controller-front { @@ -310,6 +333,14 @@ st,bank-name = "PIO31"; }; + pwm0 { + pinctrl_pwm0_chan0_default: pwm0-0-default { + st,pins { + pwm-out = <&pio9 7 ALT2 OUT>; + }; + }; + }; + serial2-oe { pinctrl_serial2_oe: serial2-1 { st,pins { @@ -540,6 +571,25 @@ }; }; }; + + pwm0 { + pinctrl_pwm0_chan1_default: pwm0-1-default { + st,pins { + pwm-out = <&pio13 2 ALT2 OUT>; + }; + }; + pinctrl_pwm0_chan2_default: pwm0-2-default { + st,pins { + pwm-out = <&pio15 2 ALT4 OUT>; + }; + }; + pinctrl_pwm0_chan3_default: pwm0-3-default { + st,pins { + pwm-out = <&pio17 4 ALT1 OUT>; + }; + }; + }; + }; pin-controller-fvdp-fe { diff --git a/arch/arm/boot/dts/stih416.dtsi b/arch/arm/boot/dts/stih416.dtsi index eeb7afecb..9dca173e6 100644 --- a/arch/arm/boot/dts/stih416.dtsi +++ b/arch/arm/boot/dts/stih416.dtsi @@ -13,6 +13,7 @@ #include <dt-bindings/phy/phy.h> #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/reset-controller/stih416-resets.h> +#include <dt-bindings/interrupt-controller/irq-st.h> / { L2: cache-controller { compatible = "arm,pl310-cache"; @@ -23,6 +24,12 @@ cache-level = <2>; }; + arm-pmu { + compatible = "arm,cortex-a9-pmu"; + interrupt-parent = <&intc>; + interrupts = <GIC_PPI 15 IRQ_TYPE_LEVEL_HIGH>; + }; + soc { #address-cells = <1>; #size-cells = <1>; @@ -30,6 +37,12 @@ ranges; compatible = "simple-bus"; + restart { + compatible = "st,stih416-restart"; + st,syscfg = <&syscfg_sbc>; + status = "okay"; + }; + powerdown: powerdown-controller { #reset-cells = <1>; compatible = "st,stih416-powerdown"; @@ -86,6 +99,15 @@ reg = <0xfe4b5100 0x8>; }; + irq-syscfg { + compatible = "st,stih416-irq-syscfg"; + st,syscfg = <&syscfg_cpu>; + st,irq-device = <ST_IRQ_SYSCFG_PMU_0>, + <ST_IRQ_SYSCFG_PMU_1>; + st,fiq-device = <ST_IRQ_SYSCFG_DISABLED>, + <ST_IRQ_SYSCFG_DISABLED>; + }; + serial2: serial@fed32000{ compatible = "st,asc"; status = "disabled"; @@ -104,7 +126,7 @@ interrupts = <0 210 0>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_sbc_serial1>; - clocks = <&clk_sysin>; + clocks = <&clk_sysin>; }; i2c@fed40000 { @@ -445,5 +467,47 @@ <&softreset STIH416_USB3_SOFTRESET>; reset-names = "power", "softreset"; }; + + /* SAS PWM Module */ + pwm0: pwm@fed10000 { + compatible = "st,sti-pwm"; + status = "disabled"; + #pwm-cells = <2>; + reg = <0xfed10000 0x68>; + + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm0_chan0_default + &pinctrl_pwm0_chan1_default + &pinctrl_pwm0_chan2_default + &pinctrl_pwm0_chan3_default>; + + clock-names = "pwm"; + clocks = <&clk_sysin>; + st,pwm-num-chan = <4>; + }; + + /* SBC PWM Module */ + pwm1: pwm@fe510000 { + compatible = "st,sti-pwm"; + status = "disabled"; + #pwm-cells = <2>; + reg = <0xfe510000 0x68>; + + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm1_chan0_default + /* + * Shared with SBC_OBS_NOTRST. Don't + * enable unless you really know what + * you're doing. + * + * &pinctrl_pwm1_chan1_default + */ + &pinctrl_pwm1_chan2_default + &pinctrl_pwm1_chan3_default>; + + clock-names = "pwm"; + clocks = <&clk_sysin>; + st,pwm-num-chan = <3>; + }; }; }; diff --git a/arch/arm/boot/dts/stih418-b2199.dts b/arch/arm/boot/dts/stih418-b2199.dts index 926235c08..82eee39cc 100644 --- a/arch/arm/boot/dts/stih418-b2199.dts +++ b/arch/arm/boot/dts/stih418-b2199.dts @@ -74,5 +74,32 @@ st,i2c-min-scl-pulse-width-us = <0>; st,i2c-min-sda-pulse-width-us = <5>; }; + + mmc1: sdhci@09080000 { + status = "okay"; + }; + + mmc0: sdhci@09060000 { + status = "okay"; + max-frequency = <200000000>; + sd-uhs-sdr50; + sd-uhs-sdr104; + sd-uhs-ddr50; + }; + + miphy28lp_phy: miphy28lp@9b22000 { + + phy_port0: port@9b22000 { + st,osc-rdy; + }; + + phy_port1: port@9b2a000 { + st,osc-force-ext; + }; + }; + + st_dwc3: dwc3@8f94000 { + status = "okay"; + }; }; }; diff --git a/arch/arm/boot/dts/stihxxx-b2120.dtsi b/arch/arm/boot/dts/stihxxx-b2120.dtsi index c1d859092..f589fe487 100644 --- a/arch/arm/boot/dts/stihxxx-b2120.dtsi +++ b/arch/arm/boot/dts/stihxxx-b2120.dtsi @@ -47,6 +47,14 @@ status = "okay"; }; + mmc0: sdhci@09060000 { + status = "okay"; + }; + + mmc1: sdhci@09080000 { + status = "okay"; + }; + /* SSC11 to HDMI */ hdmiddc: i2c@9541000 { status = "okay"; @@ -66,5 +74,10 @@ st,osc-force-ext; }; }; + + st_dwc3: dwc3@8f94000 { + status = "okay"; + }; + }; }; diff --git a/arch/arm/boot/dts/stm32f429-disco.dts b/arch/arm/boot/dts/stm32f429-disco.dts new file mode 100644 index 000000000..6b9aa59d9 --- /dev/null +++ b/arch/arm/boot/dts/stm32f429-disco.dts @@ -0,0 +1,71 @@ +/* + * Copyright 2015 - Maxime Coquelin <mcoquelin.stm32@gmail.com> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public + * License along with this file; if not, write to the Free + * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; +#include "stm32f429.dtsi" + +/ { + model = "STMicroelectronics STM32F429i-DISCO board"; + compatible = "st,stm32f429i-disco", "st,stm32f429"; + + chosen { + bootargs = "console=ttyS0,115200 root=/dev/ram rdinit=/linuxrc"; + linux,stdout-path = &usart1; + }; + + memory { + reg = <0x90000000 0x800000>; + }; + + aliases { + serial0 = &usart1; + }; +}; + +&usart1 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/stm32f429.dtsi b/arch/arm/boot/dts/stm32f429.dtsi new file mode 100644 index 000000000..aa73b4f41 --- /dev/null +++ b/arch/arm/boot/dts/stm32f429.dtsi @@ -0,0 +1,214 @@ +/* + * Copyright 2015 - Maxime Coquelin <mcoquelin.stm32@gmail.com> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public + * License along with this file; if not, write to the Free + * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +#include "armv7-m.dtsi" + +/ { + clocks { + clk_sysclk: clk-sysclk { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <180000000>; + }; + + clk_hclk: clk-hclk { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <180000000>; + }; + + clk_pclk1: clk-pclk1 { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <45000000>; + }; + + clk_pclk2: clk-pclk2 { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <90000000>; + }; + + clk_pmtr1: clk-pmtr1 { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <90000000>; + }; + + clk_pmtr2: clk-pmtr2 { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <180000000>; + }; + + clk_systick: clk-systick { + compatible = "fixed-factor-clock"; + clocks = <&clk_hclk>; + #clock-cells = <0>; + clock-div = <8>; + clock-mult = <1>; + }; + }; + + soc { + timer2: timer@40000000 { + compatible = "st,stm32-timer"; + reg = <0x40000000 0x400>; + interrupts = <28>; + clocks = <&clk_pmtr1>; + status = "disabled"; + }; + + timer3: timer@40000400 { + compatible = "st,stm32-timer"; + reg = <0x40000400 0x400>; + interrupts = <29>; + clocks = <&clk_pmtr1>; + status = "disabled"; + }; + + timer4: timer@40000800 { + compatible = "st,stm32-timer"; + reg = <0x40000800 0x400>; + interrupts = <30>; + clocks = <&clk_pmtr1>; + status = "disabled"; + }; + + timer5: timer@40000c00 { + compatible = "st,stm32-timer"; + reg = <0x40000c00 0x400>; + interrupts = <50>; + clocks = <&clk_pmtr1>; + }; + + timer6: timer@40001000 { + compatible = "st,stm32-timer"; + reg = <0x40001000 0x400>; + interrupts = <54>; + clocks = <&clk_pmtr1>; + status = "disabled"; + }; + + timer7: timer@40001400 { + compatible = "st,stm32-timer"; + reg = <0x40001400 0x400>; + interrupts = <55>; + clocks = <&clk_pmtr1>; + status = "disabled"; + }; + + usart2: serial@40004400 { + compatible = "st,stm32-usart", "st,stm32-uart"; + reg = <0x40004400 0x400>; + interrupts = <38>; + clocks = <&clk_pclk1>; + status = "disabled"; + }; + + usart3: serial@40004800 { + compatible = "st,stm32-usart", "st,stm32-uart"; + reg = <0x40004800 0x400>; + interrupts = <39>; + clocks = <&clk_pclk1>; + status = "disabled"; + }; + + usart4: serial@40004c00 { + compatible = "st,stm32-uart"; + reg = <0x40004c00 0x400>; + interrupts = <52>; + clocks = <&clk_pclk1>; + status = "disabled"; + }; + + usart5: serial@40005000 { + compatible = "st,stm32-uart"; + reg = <0x40005000 0x400>; + interrupts = <53>; + clocks = <&clk_pclk1>; + status = "disabled"; + }; + + usart7: serial@40007800 { + compatible = "st,stm32-usart", "st,stm32-uart"; + reg = <0x40007800 0x400>; + interrupts = <82>; + clocks = <&clk_pclk1>; + status = "disabled"; + }; + + usart8: serial@40007c00 { + compatible = "st,stm32-usart", "st,stm32-uart"; + reg = <0x40007c00 0x400>; + interrupts = <83>; + clocks = <&clk_pclk1>; + status = "disabled"; + }; + + usart1: serial@40011000 { + compatible = "st,stm32-usart", "st,stm32-uart"; + reg = <0x40011000 0x400>; + interrupts = <37>; + clocks = <&clk_pclk2>; + status = "disabled"; + }; + + usart6: serial@40011400 { + compatible = "st,stm32-usart", "st,stm32-uart"; + reg = <0x40011400 0x400>; + interrupts = <71>; + clocks = <&clk_pclk2>; + status = "disabled"; + }; + }; +}; + +&systick { + clocks = <&clk_systick>; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/sun4i-a10-a1000.dts b/arch/arm/boot/dts/sun4i-a10-a1000.dts index b67e5be61..2630d78d9 100644 --- a/arch/arm/boot/dts/sun4i-a10-a1000.dts +++ b/arch/arm/boot/dts/sun4i-a10-a1000.dts @@ -18,11 +18,6 @@ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * You should have received a copy of the GNU General Public - * License along with this file; if not, write to the Free - * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, - * MA 02110-1301 USA - * * Or, alternatively, * * b) Permission is hereby granted, free of charge, to any person @@ -58,101 +53,12 @@ model = "Mele A1000"; compatible = "mele,a1000", "allwinner,sun4i-a10"; - soc@01c00000 { - emac: ethernet@01c0b000 { - pinctrl-names = "default"; - pinctrl-0 = <&emac_pins_a>; - phy = <&phy1>; - status = "okay"; - }; - - mdio@01c0b080 { - phy-supply = <®_emac_3v3>; - status = "okay"; - - phy1: ethernet-phy@1 { - reg = <1>; - }; - }; - - mmc0: mmc@01c0f000 { - pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>; - vmmc-supply = <®_vcc3v3>; - bus-width = <4>; - cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */ - cd-inverted; - status = "okay"; - }; - - usbphy: phy@01c13400 { - usb1_vbus-supply = <®_usb1_vbus>; - usb2_vbus-supply = <®_usb2_vbus>; - status = "okay"; - }; - - ehci0: usb@01c14000 { - status = "okay"; - }; - - ohci0: usb@01c14400 { - status = "okay"; - }; - - ahci: sata@01c18000 { - status = "okay"; - }; - - ehci1: usb@01c1c000 { - status = "okay"; - }; - - ohci1: usb@01c1c400 { - status = "okay"; - }; - - pinctrl@01c20800 { - emac_power_pin_a1000: emac_power_pin@0 { - allwinner,pins = "PH15"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; - }; - - led_pins_a1000: led_pins@0 { - allwinner,pins = "PH10", "PH20"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; - }; - }; - - ir0: ir@01c21800 { - pinctrl-names = "default"; - pinctrl-0 = <&ir0_pins_a>; - status = "okay"; - }; - - uart0: serial@01c28000 { - pinctrl-names = "default"; - pinctrl-0 = <&uart0_pins_a>; - status = "okay"; - }; - - i2c0: i2c@01c2ac00 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c0_pins_a>; - status = "okay"; - - axp209: pmic@34 { - compatible = "x-powers,axp209"; - reg = <0x34>; - interrupts = <0>; + aliases { + serial0 = &uart0; + }; - interrupt-controller; - #interrupt-cells = <1>; - }; - }; + chosen { + stdout-path = "serial0:115200n8"; }; leds { @@ -181,12 +87,111 @@ enable-active-high; gpio = <&pio 7 15 GPIO_ACTIVE_HIGH>; }; +}; + +&ahci { + status = "okay"; +}; - reg_usb1_vbus: usb1-vbus { - status = "okay"; +&ehci0 { + status = "okay"; +}; + +&ehci1 { + status = "okay"; +}; + +&emac { + pinctrl-names = "default"; + pinctrl-0 = <&emac_pins_a>; + phy = <&phy1>; + status = "okay"; +}; + +&emac_sram { + status = "okay"; +}; + +&i2c0 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins_a>; + status = "okay"; + + axp209: pmic@34 { + compatible = "x-powers,axp209"; + reg = <0x34>; + interrupts = <0>; + + interrupt-controller; + #interrupt-cells = <1>; + }; +}; + +&ir0 { + pinctrl-names = "default"; + pinctrl-0 = <&ir0_rx_pins_a>; + status = "okay"; +}; + +&mdio { + phy-supply = <®_emac_3v3>; + status = "okay"; + + phy1: ethernet-phy@1 { + reg = <1>; + }; +}; + +&mmc0 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>; + vmmc-supply = <®_vcc3v3>; + bus-width = <4>; + cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */ + cd-inverted; + status = "okay"; +}; + +&ohci0 { + status = "okay"; +}; + +&ohci1 { + status = "okay"; +}; + +&pio { + emac_power_pin_a1000: emac_power_pin@0 { + allwinner,pins = "PH15"; + allwinner,function = "gpio_out"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; - reg_usb2_vbus: usb2-vbus { - status = "okay"; + led_pins_a1000: led_pins@0 { + allwinner,pins = "PH10", "PH20"; + allwinner,function = "gpio_out"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; }; + +®_usb1_vbus { + status = "okay"; +}; + +®_usb2_vbus { + status = "okay"; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pins_a>; + status = "okay"; +}; + +&usbphy { + usb1_vbus-supply = <®_usb1_vbus>; + usb2_vbus-supply = <®_usb2_vbus>; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/sun4i-a10-ba10-tvbox.dts b/arch/arm/boot/dts/sun4i-a10-ba10-tvbox.dts index 490b77c9b..93d435670 100644 --- a/arch/arm/boot/dts/sun4i-a10-ba10-tvbox.dts +++ b/arch/arm/boot/dts/sun4i-a10-ba10-tvbox.dts @@ -16,11 +16,6 @@ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * You should have received a copy of the GNU General Public - * License along with this file; if not, write to the Free - * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, - * MA 02110-1301 USA - * * Or, alternatively, * * b) Permission is hereby granted, free of charge, to any person @@ -55,94 +50,104 @@ model = "BA10 tvbox"; compatible = "allwinner,ba10-tvbox", "allwinner,sun4i-a10"; - soc@01c00000 { - emac: ethernet@01c0b000 { - pinctrl-names = "default"; - pinctrl-0 = <&emac_pins_a>; - phy = <&phy1>; - status = "okay"; - }; - - mdio@01c0b080 { - status = "okay"; - - phy1: ethernet-phy@1 { - reg = <1>; - }; - }; - - mmc0: mmc@01c0f000 { - pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>; - vmmc-supply = <®_vcc3v3>; - bus-width = <4>; - cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */ - cd-inverted; - status = "okay"; - }; - - usbphy: phy@01c13400 { - usb1_vbus-supply = <®_usb1_vbus>; - usb2_vbus-supply = <®_usb2_vbus>; - status = "okay"; - }; - - ehci0: usb@01c14000 { - status = "okay"; - }; - - ohci0: usb@01c14400 { - status = "okay"; - }; - - ehci1: usb@01c1c000 { - status = "okay"; - }; - - ohci1: usb@01c1c400 { - status = "okay"; - }; - - pinctrl@01c20800 { - usb2_vbus_pin_a: usb2_vbus_pin@0 { - allwinner,pins = "PH12"; - }; - }; - - ir0: ir@01c21800 { - pinctrl-names = "default"; - pinctrl-0 = <&ir0_pins_a>; - status = "okay"; - }; - - uart0: serial@01c28000 { - pinctrl-names = "default"; - pinctrl-0 = <&uart0_pins_a>; - status = "okay"; - }; - - i2c0: i2c@01c2ac00 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c0_pins_a>; - status = "okay"; - - axp209: pmic@34 { - compatible = "x-powers,axp209"; - reg = <0x34>; - interrupts = <0>; - - interrupt-controller; - #interrupt-cells = <1>; - }; - }; + aliases { + serial0 = &uart0; + }; + + chosen { + stdout-path = "serial0:115200n8"; }; +}; + +&ehci0 { + status = "okay"; +}; + +&ehci1 { + status = "okay"; +}; + +&emac { + pinctrl-names = "default"; + pinctrl-0 = <&emac_pins_a>; + phy = <&phy1>; + status = "okay"; +}; + +&emac_sram { + status = "okay"; +}; + +&i2c0 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins_a>; + status = "okay"; + + axp209: pmic@34 { + compatible = "x-powers,axp209"; + reg = <0x34>; + interrupts = <0>; - reg_usb1_vbus: usb1-vbus { - status = "okay"; + interrupt-controller; + #interrupt-cells = <1>; }; +}; + +&ir0 { + pinctrl-names = "default"; + pinctrl-0 = <&ir0_rx_pins_a>; + status = "okay"; +}; + +&mdio { + status = "okay"; - reg_usb2_vbus: usb2-vbus { - gpio = <&pio 7 12 GPIO_ACTIVE_HIGH>; - status = "okay"; + phy1: ethernet-phy@1 { + reg = <1>; }; }; + +&mmc0 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>; + vmmc-supply = <®_vcc3v3>; + bus-width = <4>; + cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */ + cd-inverted; + status = "okay"; +}; + +&ohci0 { + status = "okay"; +}; + +&ohci1 { + status = "okay"; +}; + +&pio { + usb2_vbus_pin_a: usb2_vbus_pin@0 { + allwinner,pins = "PH12"; + }; +}; + +®_usb1_vbus { + status = "okay"; +}; + +®_usb2_vbus { + gpio = <&pio 7 12 GPIO_ACTIVE_HIGH>; + status = "okay"; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pins_a>; + status = "okay"; +}; + +&usbphy { + usb1_vbus-supply = <®_usb1_vbus>; + usb2_vbus-supply = <®_usb2_vbus>; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/sun4i-a10-chuwi-v7-cw0825.dts b/arch/arm/boot/dts/sun4i-a10-chuwi-v7-cw0825.dts index 58214f249..5878a0b11 100644 --- a/arch/arm/boot/dts/sun4i-a10-chuwi-v7-cw0825.dts +++ b/arch/arm/boot/dts/sun4i-a10-chuwi-v7-cw0825.dts @@ -16,11 +16,6 @@ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * You should have received a copy of the GNU General Public - * License along with this file; if not, write to the Free - * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, - * MA 02110-1301 USA - * * Or, alternatively, * * b) Permission is hereby granted, free of charge, to any person @@ -49,10 +44,19 @@ #include "sun4i-a10.dtsi" #include "sunxi-common-regulators.dtsi" #include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> / { model = "Chuwi V7 CW0825"; compatible = "chuwi,v7-cw0825", "allwinner,sun4i-a10"; + + aliases { + serial0 = &uart0; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; }; &ehci1 { @@ -74,6 +78,32 @@ }; }; +&lradc { + vref-supply = <®_vcc3v0>; + status = "okay"; + + button@800 { + label = "Volume Up"; + linux,code = <KEY_VOLUMEUP>; + channel = <0>; + voltage = <800000>; + }; + + button@1000 { + label = "Volume Down"; + linux,code = <KEY_VOLUMEDOWN>; + channel = <0>; + voltage = <1000000>; + }; + + button@1200 { + label = "Back"; + linux,code = <KEY_BACK>; + channel = <0>; + voltage = <1200000>; + }; +}; + &mmc0 { pinctrl-names = "default"; pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>; diff --git a/arch/arm/boot/dts/sun4i-a10-cubieboard.dts b/arch/arm/boot/dts/sun4i-a10-cubieboard.dts index 4260c2b47..9afb4e018 100644 --- a/arch/arm/boot/dts/sun4i-a10-cubieboard.dts +++ b/arch/arm/boot/dts/sun4i-a10-cubieboard.dts @@ -17,11 +17,6 @@ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * You should have received a copy of the GNU General Public - * License along with this file; if not, write to the Free - * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, - * MA 02110-1301 USA - * * Or, alternatively, * * b) Permission is hereby granted, free of charge, to any person @@ -57,102 +52,12 @@ model = "Cubietech Cubieboard"; compatible = "cubietech,a10-cubieboard", "allwinner,sun4i-a10"; - soc@01c00000 { - emac: ethernet@01c0b000 { - pinctrl-names = "default"; - pinctrl-0 = <&emac_pins_a>; - phy = <&phy1>; - status = "okay"; - }; - - mdio@01c0b080 { - status = "okay"; - - phy1: ethernet-phy@1 { - reg = <1>; - }; - }; - - mmc0: mmc@01c0f000 { - pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>; - vmmc-supply = <®_vcc3v3>; - bus-width = <4>; - cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */ - cd-inverted; - status = "okay"; - }; - - usbphy: phy@01c13400 { - usb1_vbus-supply = <®_usb1_vbus>; - usb2_vbus-supply = <®_usb2_vbus>; - status = "okay"; - }; - - ehci0: usb@01c14000 { - status = "okay"; - }; - - ohci0: usb@01c14400 { - status = "okay"; - }; - - ahci: sata@01c18000 { - target-supply = <®_ahci_5v>; - status = "okay"; - }; - - ehci1: usb@01c1c000 { - status = "okay"; - }; - - ohci1: usb@01c1c400 { - status = "okay"; - }; - - pinctrl@01c20800 { - led_pins_cubieboard: led_pins@0 { - allwinner,pins = "PH20", "PH21"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_20_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; - }; - }; - - ir0: ir@01c21800 { - pinctrl-names = "default"; - pinctrl-0 = <&ir0_pins_a>; - status = "okay"; - }; - - uart0: serial@01c28000 { - pinctrl-names = "default"; - pinctrl-0 = <&uart0_pins_a>; - status = "okay"; - }; - - i2c0: i2c@01c2ac00 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c0_pins_a>; - status = "okay"; - - axp209: pmic@34 { - reg = <0x34>; - interrupts = <0>; - }; - }; - - i2c1: i2c@01c2b000 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c1_pins_a>; - status = "okay"; - }; + aliases { + serial0 = &uart0; + }; - spi0: spi@01c05000 { - pinctrl-names = "default"; - pinctrl-0 = <&spi0_pins_a>; - status = "okay"; - }; + chosen { + stdout-path = "serial0:115200n8"; }; leds { @@ -171,26 +76,100 @@ linux,default-trigger = "heartbeat"; }; }; +}; - reg_ahci_5v: ahci-5v { - status = "okay"; - }; +&ahci { + target-supply = <®_ahci_5v>; + status = "okay"; +}; + +&cpu0 { + cpu-supply = <®_dcdc2>; +}; - reg_usb1_vbus: usb1-vbus { - status = "okay"; +&ehci0 { + status = "okay"; +}; + +&ehci1 { + status = "okay"; +}; + +&emac { + pinctrl-names = "default"; + pinctrl-0 = <&emac_pins_a>; + phy = <&phy1>; + status = "okay"; +}; + +&emac_sram { + status = "okay"; +}; + +&i2c0 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins_a>; + status = "okay"; + + axp209: pmic@34 { + reg = <0x34>; + interrupts = <0>; }; +}; - reg_usb2_vbus: usb2-vbus { - status = "okay"; +&i2c1 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_pins_a>; + status = "okay"; +}; + +&ir0 { + pinctrl-names = "default"; + pinctrl-0 = <&ir0_rx_pins_a>; + status = "okay"; +}; + +&mdio { + status = "okay"; + + phy1: ethernet-phy@1 { + reg = <1>; }; }; -#include "axp209.dtsi" +&mmc0 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>; + vmmc-supply = <®_vcc3v3>; + bus-width = <4>; + cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */ + cd-inverted; + status = "okay"; +}; -&cpu0 { - cpu-supply = <®_dcdc2>; +&ohci0 { + status = "okay"; }; +&ohci1 { + status = "okay"; +}; + +&pio { + led_pins_cubieboard: led_pins@0 { + allwinner,pins = "PH20", "PH21"; + allwinner,function = "gpio_out"; + allwinner,drive = <SUN4I_PINCTRL_20_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + }; +}; + +®_ahci_5v { + status = "okay"; +}; + +#include "axp209.dtsi" + ®_dcdc2 { regulator-always-on; regulator-min-microvolt = <1000000>; @@ -215,3 +194,30 @@ regulator-max-microvolt = <3000000>; regulator-name = "avcc"; }; + +®_usb1_vbus { + status = "okay"; +}; + +®_usb2_vbus { + status = "okay"; +}; + +&spi0 { + pinctrl-names = "default"; + pinctrl-0 = <&spi0_pins_a>, + <&spi0_cs0_pins_a>; + status = "okay"; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pins_a>; + status = "okay"; +}; + +&usbphy { + usb1_vbus-supply = <®_usb1_vbus>; + usb2_vbus-supply = <®_usb2_vbus>; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/sun4i-a10-gemei-g9.dts b/arch/arm/boot/dts/sun4i-a10-gemei-g9.dts new file mode 100644 index 000000000..570754d8d --- /dev/null +++ b/arch/arm/boot/dts/sun4i-a10-gemei-g9.dts @@ -0,0 +1,171 @@ +/* + * Copyright 2015 Priit Laes + * + * Priit Laes <plaes@plaes.org> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; +#include "sun4i-a10.dtsi" +#include "sunxi-common-regulators.dtsi" +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> + +/ { + model = "Gemei G9 Tablet"; + compatible = "gemei,g9", "allwinner,sun4i-a10"; + + aliases { + serial0 = &uart0; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; +}; + +/* + * TODO: + * 2x cameras via CSI + * bma250 IRQs + * AXP battery management + * NAND + * OTG + * Touchscreen - gt801_2plus1 @ i2c adapter 2 @ 0x48 + */ + +&ehci0 { + status = "okay"; +}; + +&ehci1 { + status = "okay"; +}; + +&i2c0 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins_a>; + status = "okay"; + + axp209: pmic@34 { + compatible = "x-powers,axp209"; + reg = <0x34>; + interrupts = <0>; + + interrupt-controller; + #interrupt-cells = <1>; + }; +}; + +&i2c1 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_pins_a>; + status = "okay"; + + /* Accelerometer */ + bma250@18 { + compatible = "bosch,bma250"; + reg = <0x18>; + + /* + * TODO: interrupt pins: + * int1 - PH00 + * int2 - PI10 + */ + }; +}; + +&lradc { + vref-supply = <®_vcc3v0>; + + status = "okay"; + + button@158 { + label = "Volume Down"; + linux,code = <KEY_VOLUMEDOWN>; + channel = <0>; + voltage = <158730>; + }; + + button@349 { + label = "Volume Up"; + linux,code = <KEY_VOLUMEUP>; + channel = <0>; + voltage = <349206>; + }; + + button@1142 { + label = "Esc"; + linux,code = <KEY_ESC>; + channel = <0>; + voltage = <1142856>; + }; +}; + +&mmc0 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>; + vmmc-supply = <®_vcc3v3>; + bus-width = <4>; + cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH01 */ + cd-inverted; + status = "okay"; +}; + +®_usb1_vbus { + status = "okay"; +}; + +®_usb2_vbus { + status = "okay"; +}; + + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pins_a>; + status = "okay"; +}; + +&usbphy { + usb1_vbus-supply = <®_usb1_vbus>; + usb2_vbus-supply = <®_usb2_vbus>; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/sun4i-a10-hackberry.dts b/arch/arm/boot/dts/sun4i-a10-hackberry.dts index d3f73ea25..2b17c5199 100644 --- a/arch/arm/boot/dts/sun4i-a10-hackberry.dts +++ b/arch/arm/boot/dts/sun4i-a10-hackberry.dts @@ -18,11 +18,6 @@ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * You should have received a copy of the GNU General Public - * License along with this file; if not, write to the Free - * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, - * MA 02110-1301 USA - * * Or, alternatively, * * b) Permission is hereby granted, free of charge, to any person @@ -58,100 +53,12 @@ model = "Miniand Hackberry"; compatible = "miniand,hackberry", "allwinner,sun4i-a10"; - soc@01c00000 { - emac: ethernet@01c0b000 { - pinctrl-names = "default"; - pinctrl-0 = <&emac_pins_a>; - phy = <&phy0>; - status = "okay"; - }; - - mdio@01c0b080 { - phy-supply = <®_emac_3v3>; - status = "okay"; - - phy0: ethernet-phy@0 { - reg = <0>; - }; - }; - - mmc0: mmc@01c0f000 { - pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>; - vmmc-supply = <®_vcc3v3>; - bus-width = <4>; - cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */ - cd-inverted; - status = "okay"; - }; - - usbphy: phy@01c13400 { - usb1_vbus-supply = <®_usb1_vbus>; - usb2_vbus-supply = <®_usb2_vbus>; - status = "okay"; - }; - - ehci0: usb@01c14000 { - status = "okay"; - }; - - ohci0: usb@01c14400 { - status = "okay"; - }; - - ehci1: usb@01c1c000 { - status = "okay"; - }; - - ohci1: usb@01c1c400 { - status = "okay"; - }; - - pio: pinctrl@01c20800 { - pinctrl-names = "default"; - pinctrl-0 = <&hackberry_hogs>; - - hackberry_hogs: hogs@0 { - allwinner,pins = "PH19"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; - }; - - usb2_vbus_pin_hackberry: usb2_vbus_pin@0 { - allwinner,pins = "PH12"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; - }; - }; - - ir0: ir@01c21800 { - pinctrl-names = "default"; - pinctrl-0 = <&ir0_pins_a>; - status = "okay"; - }; - - uart0: serial@01c28000 { - pinctrl-names = "default"; - pinctrl-0 = <&uart0_pins_a>; - status = "okay"; - }; - - i2c0: i2c@01c2ac00 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c0_pins_a>; - status = "okay"; - - axp209: pmic@34 { - compatible = "x-powers,axp209"; - reg = <0x34>; - interrupts = <0>; - - interrupt-controller; - #interrupt-cells = <1>; - }; - }; + aliases { + serial0 = &uart0; + }; + + chosen { + stdout-path = "serial0:115200n8"; }; reg_emac_3v3: emac-3v3 { @@ -162,14 +69,97 @@ enable-active-high; gpio = <&pio 7 19 GPIO_ACTIVE_HIGH>; }; +}; - reg_usb1_vbus: usb1-vbus { - status = "okay"; +&ehci0 { + status = "okay"; +}; + +&ehci1 { + status = "okay"; +}; + +&emac { + pinctrl-names = "default"; + pinctrl-0 = <&emac_pins_a>; + phy = <&phy0>; + status = "okay"; +}; + +&emac_sram { + status = "okay"; +}; + +&ir0 { + pinctrl-names = "default"; + pinctrl-0 = <&ir0_rx_pins_a>; + status = "okay"; +}; + +&mdio { + phy-supply = <®_emac_3v3>; + status = "okay"; + + phy0: ethernet-phy@0 { + reg = <0>; }; +}; - reg_usb2_vbus: usb2-vbus { - pinctrl-0 = <&usb2_vbus_pin_hackberry>; - gpio = <&pio 7 12 GPIO_ACTIVE_HIGH>; - status = "okay"; +&mmc0 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>; + vmmc-supply = <®_vcc3v3>; + bus-width = <4>; + cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */ + cd-inverted; + status = "okay"; +}; + +&ohci0 { + status = "okay"; +}; + +&ohci1 { + status = "okay"; +}; + +&pio { + pinctrl-names = "default"; + pinctrl-0 = <&hackberry_hogs>; + + hackberry_hogs: hogs@0 { + allwinner,pins = "PH19"; + allwinner,function = "gpio_out"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + }; + + usb2_vbus_pin_hackberry: usb2_vbus_pin@0 { + allwinner,pins = "PH12"; + allwinner,function = "gpio_out"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; }; + +®_usb1_vbus { + status = "okay"; +}; + +®_usb2_vbus { + pinctrl-0 = <&usb2_vbus_pin_hackberry>; + gpio = <&pio 7 12 GPIO_ACTIVE_HIGH>; + status = "okay"; +}; + +&usbphy { + usb1_vbus-supply = <®_usb1_vbus>; + usb2_vbus-supply = <®_usb2_vbus>; + status = "okay"; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pins_a>; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/sun4i-a10-hyundai-a7hd.dts b/arch/arm/boot/dts/sun4i-a10-hyundai-a7hd.dts index c88382aac..43f58fbe1 100644 --- a/arch/arm/boot/dts/sun4i-a10-hyundai-a7hd.dts +++ b/arch/arm/boot/dts/sun4i-a10-hyundai-a7hd.dts @@ -16,11 +16,6 @@ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * You should have received a copy of the GNU General Public - * License along with this file; if not, write to the Free - * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, - * MA 02110-1301 USA - * * Or, alternatively, * * b) Permission is hereby granted, free of charge, to any person @@ -53,6 +48,14 @@ / { model = "Hyundai A7HD"; compatible = "hyundai,a7hd", "allwinner,sun4i-a10"; + + aliases { + serial0 = &uart0; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; }; &ehci1 { diff --git a/arch/arm/boot/dts/sun4i-a10-inet97fv2.dts b/arch/arm/boot/dts/sun4i-a10-inet97fv2.dts index 482914333..6c927a824 100644 --- a/arch/arm/boot/dts/sun4i-a10-inet97fv2.dts +++ b/arch/arm/boot/dts/sun4i-a10-inet97fv2.dts @@ -18,11 +18,6 @@ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * You should have received a copy of the GNU General Public - * License along with this file; if not, write to the Free - * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, - * MA 02110-1301 USA - * * Or, alternatively, * * b) Permission is hereby granted, free of charge, to any person @@ -61,66 +56,68 @@ serial0 = &uart0; }; - soc@01c00000 { - mmc0: mmc@01c0f000 { - pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>; - vmmc-supply = <®_vcc3v3>; - bus-width = <4>; - cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */ - cd-inverted; - status = "okay"; - }; - - uart0: serial@01c28000 { - pinctrl-names = "default"; - pinctrl-0 = <&uart0_pins_a>; - status = "okay"; - }; - - usbphy: phy@01c13400 { - usb1_vbus-supply = <®_usb1_vbus>; - usb2_vbus-supply = <®_usb2_vbus>; - status = "okay"; - }; - - ehci0: usb@01c14000 { - status = "okay"; - }; - - ohci0: usb@01c14400 { - status = "okay"; - }; - - ehci1: usb@01c1c000 { - status = "okay"; - }; - - ohci1: usb@01c1c400 { - status = "okay"; - }; - - i2c0: i2c@01c2ac00 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c0_pins_a>; - status = "okay"; - - axp209: pmic@34 { - compatible = "x-powers,axp209"; - reg = <0x34>; - interrupts = <0>; - - interrupt-controller; - #interrupt-cells = <1>; - }; - }; + chosen { + stdout-path = "serial0:115200n8"; }; +}; - reg_usb1_vbus: usb1-vbus { - status = "okay"; - }; +&ehci0 { + status = "okay"; +}; + +&ehci1 { + status = "okay"; +}; - reg_usb2_vbus: usb2-vbus { - status = "okay"; +&i2c0 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins_a>; + status = "okay"; + + axp209: pmic@34 { + compatible = "x-powers,axp209"; + reg = <0x34>; + interrupts = <0>; + + interrupt-controller; + #interrupt-cells = <1>; }; }; + +&mmc0 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>; + vmmc-supply = <®_vcc3v3>; + bus-width = <4>; + cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */ + cd-inverted; + status = "okay"; +}; + +&ohci0 { + status = "okay"; +}; + +&ohci1 { + status = "okay"; +}; + +®_usb1_vbus { + status = "okay"; +}; + +®_usb2_vbus { + status = "okay"; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pins_a>; + status = "okay"; +}; + +&usbphy { + usb1_vbus-supply = <®_usb1_vbus>; + usb2_vbus-supply = <®_usb2_vbus>; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/sun4i-a10-jesurun-q5.dts b/arch/arm/boot/dts/sun4i-a10-jesurun-q5.dts new file mode 100644 index 000000000..dc2f2aeaf --- /dev/null +++ b/arch/arm/boot/dts/sun4i-a10-jesurun-q5.dts @@ -0,0 +1,193 @@ +/* + * Copyright 2015 Gábor Nyers + * + * Gábor Nyers <gabor.nyers@gmail.com> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; +#include "sun4i-a10.dtsi" +#include "sunxi-common-regulators.dtsi" + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/pinctrl/sun4i-a10.h> + +/ { + model = "Jesurun Q5"; + compatible = "jesurun,q5", "allwinner,sun4i-a10"; + + aliases { + serial0 = &uart0; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&led_pins_q5>; + + green { + label = "q5:green:usr"; + gpios = <&pio 7 20 GPIO_ACTIVE_HIGH>; /* PH20 */ + }; + + }; + + reg_emac_3v3: emac-3v3 { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&emac_power_pin_q5>; + regulator-name = "emac-3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + enable-active-high; + gpio = <&pio 7 19 GPIO_ACTIVE_HIGH>; /* PH19 */ + }; +}; + +&ahci { + status = "okay"; +}; + +&ehci0 { + status = "okay"; +}; + +&ehci1 { + status = "okay"; +}; + +&emac { + pinctrl-names = "default"; + pinctrl-0 = <&emac_pins_a>; + phy = <&phy1>; + status = "okay"; +}; + +&emac_sram { + status = "okay"; +}; + +&i2c0 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins_a>; + status = "okay"; + + axp209: pmic@34 { + compatible = "x-powers,axp209"; + reg = <0x34>; + interrupts = <0>; + + interrupt-controller; + #interrupt-cells = <1>; + }; +}; + +&ir0 { + pinctrl-names = "default"; + pinctrl-0 = <&ir0_rx_pins_a>; + status = "okay"; +}; + +&mdio { + phy-supply = <®_emac_3v3>; + status = "okay"; + + phy1: ethernet-phy@1 { + reg = <1>; + }; +}; + +&mmc0 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>; + vmmc-supply = <®_vcc3v3>; + bus-width = <4>; + cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */ + cd-inverted; + status = "okay"; +}; + +&ohci0 { + status = "okay"; +}; + +&ohci1 { + status = "okay"; +}; + +&pio { + emac_power_pin_q5: emac_power_pin@0 { + allwinner,pins = "PH19"; + allwinner,function = "gpio_out"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + }; + + led_pins_q5: led_pins@0 { + allwinner,pins = "PH20"; + allwinner,function = "gpio_out"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + }; +}; + +®_usb1_vbus { + status = "okay"; +}; + +®_usb2_vbus { + status = "okay"; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pins_a>; + status = "okay"; +}; + +&usbphy { + usb1_vbus-supply = <®_usb1_vbus>; + usb2_vbus-supply = <®_usb2_vbus>; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/sun4i-a10-marsboard.dts b/arch/arm/boot/dts/sun4i-a10-marsboard.dts index 9ee86a700..02158bcd6 100644 --- a/arch/arm/boot/dts/sun4i-a10-marsboard.dts +++ b/arch/arm/boot/dts/sun4i-a10-marsboard.dts @@ -17,11 +17,6 @@ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * You should have received a copy of the GNU General Public - * License along with this file; if not, write to the Free - * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, - * MA 02110-1301 USA - * * Or, alternatively, * * b) Permission is hereby granted, free of charge, to any person @@ -57,6 +52,14 @@ model = "HAOYU Electronics Marsboard A10"; compatible = "haoyu,a10-marsboard", "allwinner,sun4i-a10"; + aliases { + serial0 = &uart0; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + leds { compatible = "gpio-leds"; pinctrl-names = "default"; @@ -96,6 +99,10 @@ status = "okay"; }; +&emac_sram { + status = "okay"; +}; + &emac { pinctrl-names = "default"; pinctrl-0 = <&emac_pins_a>; @@ -166,7 +173,8 @@ &spi0 { pinctrl-names = "default"; - pinctrl-0 = <&spi0_pins_a>; + pinctrl-0 = <&spi0_pins_a>, + <&spi0_cs0_pins_a>; status = "okay"; }; diff --git a/arch/arm/boot/dts/sun4i-a10-mini-xplus.dts b/arch/arm/boot/dts/sun4i-a10-mini-xplus.dts index eb5fd6904..ebe2a04ef 100644 --- a/arch/arm/boot/dts/sun4i-a10-mini-xplus.dts +++ b/arch/arm/boot/dts/sun4i-a10-mini-xplus.dts @@ -18,11 +18,6 @@ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * You should have received a copy of the GNU General Public - * License along with this file; if not, write to the Free - * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, - * MA 02110-1301 USA - * * Or, alternatively, * * b) Permission is hereby granted, free of charge, to any person @@ -58,79 +53,83 @@ model = "PineRiver Mini X-Plus"; compatible = "pineriver,mini-xplus", "allwinner,sun4i-a10"; - soc@01c00000 { - mmc0: mmc@01c0f000 { - pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>; - vmmc-supply = <®_vcc3v3>; - bus-width = <4>; - cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */ - cd-inverted; - status = "okay"; - }; - - usbphy: phy@01c13400 { - usb1_vbus-supply = <®_usb1_vbus>; - usb2_vbus-supply = <®_usb2_vbus>; - status = "okay"; - }; - - ehci0: usb@01c14000 { - status = "okay"; - }; - - ohci0: usb@01c14400 { - status = "okay"; - }; - - ehci1: usb@01c1c000 { - status = "okay"; - }; - - ohci1: usb@01c1c400 { - status = "okay"; - }; - - pinctrl@01c20800 { - ir0_pins_a: ir0@0 { - /* The ir receiver is not always populated */ - allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; - }; - }; - - ir0: ir@01c21800 { - pinctrl-names = "default"; - pinctrl-0 = <&ir0_pins_a>; - status = "okay"; - }; - - uart0: serial@01c28000 { - pinctrl-names = "default"; - pinctrl-0 = <&uart0_pins_a>; - status = "okay"; - }; - - i2c0: i2c@01c2ac00 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c0_pins_a>; - status = "okay"; - - axp209: pmic@34 { - compatible = "x-powers,axp209"; - reg = <0x34>; - interrupts = <0>; - - interrupt-controller; - #interrupt-cells = <1>; - }; - }; + aliases { + serial0 = &uart0; }; - reg_usb1_vbus: usb1-vbus { - status = "okay"; + chosen { + stdout-path = "serial0:115200n8"; }; +}; + +&ehci0 { + status = "okay"; +}; + +&ehci1 { + status = "okay"; +}; + +&i2c0 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins_a>; + status = "okay"; - reg_usb2_vbus: usb2-vbus { - status = "okay"; + axp209: pmic@34 { + compatible = "x-powers,axp209"; + reg = <0x34>; + interrupts = <0>; + + interrupt-controller; + #interrupt-cells = <1>; }; }; + +&ir0 { + pinctrl-names = "default"; + pinctrl-0 = <&ir0_rx_pins_a>; + status = "okay"; +}; + +&ir0_rx_pins_a { + /* The ir receiver is not always populated */ + allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; +}; + +&mmc0 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>; + vmmc-supply = <®_vcc3v3>; + bus-width = <4>; + cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */ + cd-inverted; + status = "okay"; +}; + +&ohci0 { + status = "okay"; +}; + +&ohci1 { + status = "okay"; +}; + +®_usb1_vbus { + status = "okay"; +}; + +®_usb2_vbus { + status = "okay"; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pins_a>; + status = "okay"; +}; + +&usbphy { + usb1_vbus-supply = <®_usb1_vbus>; + usb2_vbus-supply = <®_usb2_vbus>; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/sun4i-a10-mk802.dts b/arch/arm/boot/dts/sun4i-a10-mk802.dts index e9a6886f0..3c7eebe17 100644 --- a/arch/arm/boot/dts/sun4i-a10-mk802.dts +++ b/arch/arm/boot/dts/sun4i-a10-mk802.dts @@ -16,11 +16,6 @@ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * You should have received a copy of the GNU General Public - * License along with this file; if not, write to the Free - * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, - * MA 02110-1301 USA - * * Or, alternatively, * * b) Permission is hereby granted, free of charge, to any person @@ -53,6 +48,14 @@ / { model = "MK802"; compatible = "allwinner,mk802", "allwinner,sun4i-a10"; + + aliases { + serial0 = &uart0; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; }; &ehci0 { diff --git a/arch/arm/boot/dts/sun4i-a10-mk802ii.dts b/arch/arm/boot/dts/sun4i-a10-mk802ii.dts index 802eda494..c861fa7e3 100644 --- a/arch/arm/boot/dts/sun4i-a10-mk802ii.dts +++ b/arch/arm/boot/dts/sun4i-a10-mk802ii.dts @@ -16,11 +16,6 @@ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * You should have received a copy of the GNU General Public - * License along with this file; if not, write to the Free - * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, - * MA 02110-1301 USA - * * Or, alternatively, * * b) Permission is hereby granted, free of charge, to any person @@ -53,6 +48,14 @@ / { model = "MK802ii"; compatible = "allwinner,mk802ii", "allwinner,sun4i-a10"; + + aliases { + serial0 = &uart0; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; }; &ehci0 { diff --git a/arch/arm/boot/dts/sun4i-a10-olinuxino-lime.dts b/arch/arm/boot/dts/sun4i-a10-olinuxino-lime.dts index 75742f8f9..b64aa4eb0 100644 --- a/arch/arm/boot/dts/sun4i-a10-olinuxino-lime.dts +++ b/arch/arm/boot/dts/sun4i-a10-olinuxino-lime.dts @@ -16,11 +16,6 @@ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * You should have received a copy of the GNU General Public - * License along with this file; if not, write to the Free - * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, - * MA 02110-1301 USA - * * Or, alternatively, * * b) Permission is hereby granted, free of charge, to any person @@ -56,136 +51,143 @@ model = "Olimex A10-OLinuXino-LIME"; compatible = "olimex,a10-olinuxino-lime", "allwinner,sun4i-a10"; - cpus { - cpu0: cpu@0 { - /* - * The A10-Lime is known to be unstable - * when running at 1008 MHz - */ - operating-points = < - /* kHz uV */ - 912000 1350000 - 864000 1300000 - 624000 1250000 - >; - cooling-max-level = <2>; - }; + aliases { + serial0 = &uart0; }; - soc@01c00000 { - emac: ethernet@01c0b000 { - pinctrl-names = "default"; - pinctrl-0 = <&emac_pins_a>; - phy = <&phy1>; - status = "okay"; - }; - - mdio@01c0b080 { - status = "okay"; + chosen { + stdout-path = "serial0:115200n8"; + }; - phy1: ethernet-phy@1 { - reg = <1>; - }; - }; + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&led_pins_olinuxinolime>; - mmc0: mmc@01c0f000 { - pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>; - vmmc-supply = <®_vcc3v3>; - bus-width = <4>; - cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */ - cd-inverted; - status = "okay"; + green { + label = "a10-olinuxino-lime:green:usr"; + gpios = <&pio 7 2 GPIO_ACTIVE_HIGH>; + default-state = "on"; }; + }; +}; - usbphy: phy@01c13400 { - usb1_vbus-supply = <®_usb1_vbus>; - usb2_vbus-supply = <®_usb2_vbus>; - status = "okay"; - }; +&ahci { + target-supply = <®_ahci_5v>; + status = "okay"; +}; - ehci0: usb@01c14000 { - status = "okay"; - }; +&cpu0 { + /* + * The A10-Lime is known to be unstable when running at 1008 MHz + */ + operating-points = < + /* kHz uV */ + 912000 1350000 + 864000 1300000 + 624000 1250000 + >; + cooling-max-level = <2>; +}; - ohci0: usb@01c14400 { - status = "okay"; - }; +&ehci0 { + status = "okay"; +}; - ahci: sata@01c18000 { - target-supply = <®_ahci_5v>; - status = "okay"; - }; +&ehci1 { + status = "okay"; +}; - ehci1: usb@01c1c000 { - status = "okay"; - }; +&emac { + pinctrl-names = "default"; + pinctrl-0 = <&emac_pins_a>; + phy = <&phy1>; + status = "okay"; +}; - ohci1: usb@01c1c400 { - status = "okay"; - }; +&emac_sram { + status = "okay"; +}; - pinctrl@01c20800 { - ahci_pwr_pin_olinuxinolime: ahci_pwr_pin@1 { - allwinner,pins = "PC3"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; - }; - - led_pins_olinuxinolime: led_pins@0 { - allwinner,pins = "PH2"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_20_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; - }; - }; +&i2c0 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins_a>; + status = "okay"; - uart0: serial@01c28000 { - pinctrl-names = "default"; - pinctrl-0 = <&uart0_pins_a>; - status = "okay"; - }; + axp209: pmic@34 { + compatible = "x-powers,axp209"; + reg = <0x34>; + interrupts = <0>; - i2c0: i2c@01c2ac00 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c0_pins_a>; - status = "okay"; + interrupt-controller; + #interrupt-cells = <1>; + }; +}; - axp209: pmic@34 { - compatible = "x-powers,axp209"; - reg = <0x34>; - interrupts = <0>; +&mdio { + status = "okay"; - interrupt-controller; - #interrupt-cells = <1>; - }; - }; + phy1: ethernet-phy@1 { + reg = <1>; }; +}; - leds { - compatible = "gpio-leds"; - pinctrl-names = "default"; - pinctrl-0 = <&led_pins_olinuxinolime>; +&mmc0 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>; + vmmc-supply = <®_vcc3v3>; + bus-width = <4>; + cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */ + cd-inverted; + status = "okay"; +}; - green { - label = "a10-olinuxino-lime:green:usr"; - gpios = <&pio 7 2 GPIO_ACTIVE_HIGH>; - default-state = "on"; - }; - }; +&ohci0 { + status = "okay"; +}; - reg_ahci_5v: ahci-5v { - pinctrl-0 = <&ahci_pwr_pin_olinuxinolime>; - gpio = <&pio 2 3 GPIO_ACTIVE_HIGH>; - status = "okay"; - }; +&ohci1 { + status = "okay"; +}; - reg_usb1_vbus: usb1-vbus { - status = "okay"; +&pio { + ahci_pwr_pin_olinuxinolime: ahci_pwr_pin@1 { + allwinner,pins = "PC3"; + allwinner,function = "gpio_out"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; - reg_usb2_vbus: usb2-vbus { - status = "okay"; + led_pins_olinuxinolime: led_pins@0 { + allwinner,pins = "PH2"; + allwinner,function = "gpio_out"; + allwinner,drive = <SUN4I_PINCTRL_20_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; }; + +®_ahci_5v { + pinctrl-0 = <&ahci_pwr_pin_olinuxinolime>; + gpio = <&pio 2 3 GPIO_ACTIVE_HIGH>; + status = "okay"; +}; + +®_usb1_vbus { + status = "okay"; +}; + +®_usb2_vbus { + status = "okay"; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pins_a>; + status = "okay"; +}; + +&usbphy { + usb1_vbus-supply = <®_usb1_vbus>; + usb2_vbus-supply = <®_usb2_vbus>; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/sun4i-a10-pcduino.dts b/arch/arm/boot/dts/sun4i-a10-pcduino.dts index 9d1e5482c..4e3e1b9d8 100644 --- a/arch/arm/boot/dts/sun4i-a10-pcduino.dts +++ b/arch/arm/boot/dts/sun4i-a10-pcduino.dts @@ -17,11 +17,6 @@ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * You should have received a copy of the GNU General Public - * License along with this file; if not, write to the Free - * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, - * MA 02110-1301 USA - * * Or, alternatively, * * b) Permission is hereby granted, free of charge, to any person @@ -58,90 +53,12 @@ model = "LinkSprite pcDuino"; compatible = "linksprite,a10-pcduino", "allwinner,sun4i-a10"; - soc@01c00000 { - emac: ethernet@01c0b000 { - pinctrl-names = "default"; - pinctrl-0 = <&emac_pins_a>; - phy = <&phy1>; - status = "okay"; - }; - - pinctrl@01c20800 { - led_pins_pcduino: led_pins@0 { - allwinner,pins = "PH15", "PH16"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; - }; - - key_pins_pcduino: key_pins@0 { - allwinner,pins = "PH17", "PH18", "PH19"; - allwinner,function = "gpio_in"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; - }; - }; - - mdio@01c0b080 { - status = "okay"; - - phy1: ethernet-phy@1 { - reg = <1>; - }; - }; - - mmc0: mmc@01c0f000 { - pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>; - vmmc-supply = <®_vcc3v3>; - bus-width = <4>; - cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */ - cd-inverted; - status = "okay"; - }; - - usbphy: phy@01c13400 { - usb1_vbus-supply = <®_usb1_vbus>; - usb2_vbus-supply = <®_usb2_vbus>; - status = "okay"; - }; - - ehci0: usb@01c14000 { - status = "okay"; - }; - - ohci0: usb@01c14400 { - status = "okay"; - }; - - ehci1: usb@01c1c000 { - status = "okay"; - }; - - ohci1: usb@01c1c400 { - status = "okay"; - }; - - uart0: serial@01c28000 { - pinctrl-names = "default"; - pinctrl-0 = <&uart0_pins_a>; - status = "okay"; - }; - - i2c0: i2c@01c2ac00 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c0_pins_a>; - status = "okay"; - - axp209: pmic@34 { - compatible = "x-powers,axp209"; - reg = <0x34>; - interrupts = <0>; + aliases { + serial0 = &uart0; + }; - interrupt-controller; - #interrupt-cells = <1>; - }; - }; + chosen { + stdout-path = "serial0:115200n8"; }; leds { @@ -185,12 +102,100 @@ gpios = <&pio 7 19 GPIO_ACTIVE_LOW>; }; }; +}; - reg_usb1_vbus: usb1-vbus { - status = "okay"; +&ehci0 { + status = "okay"; +}; + +&ehci1 { + status = "okay"; +}; + +&emac { + pinctrl-names = "default"; + pinctrl-0 = <&emac_pins_a>; + phy = <&phy1>; + status = "okay"; +}; + +&emac_sram { + status = "okay"; +}; + +&i2c0 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins_a>; + status = "okay"; + + axp209: pmic@34 { + compatible = "x-powers,axp209"; + reg = <0x34>; + interrupts = <0>; + + interrupt-controller; + #interrupt-cells = <1>; + }; +}; + +&mdio { + status = "okay"; + + phy1: ethernet-phy@1 { + reg = <1>; + }; +}; + +&mmc0 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>; + vmmc-supply = <®_vcc3v3>; + bus-width = <4>; + cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */ + cd-inverted; + status = "okay"; +}; + +&ohci0 { + status = "okay"; +}; + +&ohci1 { + status = "okay"; +}; + +&pio { + led_pins_pcduino: led_pins@0 { + allwinner,pins = "PH15", "PH16"; + allwinner,function = "gpio_out"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; - reg_usb2_vbus: usb2-vbus { - status = "okay"; + key_pins_pcduino: key_pins@0 { + allwinner,pins = "PH17", "PH18", "PH19"; + allwinner,function = "gpio_in"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; }; + +®_usb1_vbus { + status = "okay"; +}; + +®_usb2_vbus { + status = "okay"; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pins_a>; + status = "okay"; +}; + +&usbphy { + usb1_vbus-supply = <®_usb1_vbus>; + usb2_vbus-supply = <®_usb2_vbus>; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/sun4i-a10.dtsi b/arch/arm/boot/dts/sun4i-a10.dtsi index eebb7853e..61c03d1fe 100644 --- a/arch/arm/boot/dts/sun4i-a10.dtsi +++ b/arch/arm/boot/dts/sun4i-a10.dtsi @@ -2,12 +2,43 @@ * Copyright 2012 Stefan Roese * Stefan Roese <sr@denx.de> * - * The code contained herein is licensed under the GNU General Public - * License. You may obtain a copy of the GNU General Public License - * Version 2 or later at the following locations: + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. * - * http://www.opensource.org/licenses/gpl-license.html - * http://www.gnu.org/copyleft/gpl.html + * a) This library is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This library is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. */ #include "skeleton.dtsi" @@ -30,7 +61,8 @@ ranges; framebuffer@0 { - compatible = "allwinner,simple-framebuffer", "simple-framebuffer"; + compatible = "allwinner,simple-framebuffer", + "simple-framebuffer"; allwinner,pipeline = "de_be0-lcd0-hdmi"; clocks = <&pll5 1>, <&ahb_gates 36>, <&ahb_gates 43>, <&ahb_gates 44>; @@ -38,7 +70,8 @@ }; framebuffer@1 { - compatible = "allwinner,simple-framebuffer", "simple-framebuffer"; + compatible = "allwinner,simple-framebuffer", + "simple-framebuffer"; allwinner,pipeline = "de_fe0-de_be0-lcd0-hdmi"; clocks = <&pll5 1>, <&ahb_gates 36>, <&ahb_gates 43>, <&ahb_gates 44>, <&ahb_gates 46>; @@ -74,11 +107,11 @@ clocks = <&cpu>; clock-latency = <244144>; /* 8 32k periods */ operating-points = < - /* kHz uV */ + /* kHz uV */ 1008000 1400000 - 912000 1350000 - 864000 1300000 - 624000 1250000 + 912000 1350000 + 864000 1300000 + 624000 1250000 >; #cooling-cells = <2>; cooling-min-level = <0>; @@ -398,11 +431,12 @@ usb_clk: clk@01c200cc { #clock-cells = <1>; - #reset-cells = <1>; + #reset-cells = <1>; compatible = "allwinner,sun4i-a10-usb-clk"; reg = <0x01c200cc 0x4>; clocks = <&pll6 1>; - clock-output-names = "usb_ohci0", "usb_ohci1", "usb_phy"; + clock-output-names = "usb_ohci0", "usb_ohci1", + "usb_phy"; }; spi3_clk: clk@01c200d4 { @@ -420,6 +454,42 @@ #size-cells = <1>; ranges; + sram-controller@01c00000 { + compatible = "allwinner,sun4i-a10-sram-controller"; + reg = <0x01c00000 0x30>; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + sram_a: sram@00000000 { + compatible = "mmio-sram"; + reg = <0x00000000 0xc000>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x00000000 0xc000>; + + emac_sram: sram-section@8000 { + compatible = "allwinner,sun4i-a10-sram-a3-a4"; + reg = <0x8000 0x4000>; + status = "disabled"; + }; + }; + + sram_d: sram@00010000 { + compatible = "mmio-sram"; + reg = <0x00010000 0x1000>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x00010000 0x1000>; + + otg_sram: sram-section@0000 { + compatible = "allwinner,sun4i-a10-sram-d"; + reg = <0x0000 0x1000>; + status = "disabled"; + }; + }; + }; + dma: dma-controller@01c02000 { compatible = "allwinner,sun4i-a10-dma"; reg = <0x01c02000 0x1000>; @@ -461,6 +531,7 @@ reg = <0x01c0b000 0x1000>; interrupts = <55>; clocks = <&ahb_gates 17>; + allwinner,sram = <&emac_sram 1>; status = "disabled"; }; @@ -485,6 +556,8 @@ "sample"; interrupts = <32>; status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; }; mmc1: mmc@01c10000 { @@ -500,6 +573,8 @@ "sample"; interrupts = <33>; status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; }; mmc2: mmc@01c11000 { @@ -515,6 +590,8 @@ "sample"; interrupts = <34>; status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; }; mmc3: mmc@01c12000 { @@ -530,6 +607,8 @@ "sample"; interrupts = <35>; status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; }; usbphy: phy@01c13400 { @@ -706,7 +785,8 @@ }; mmc0_pins_a: mmc0@0 { - allwinner,pins = "PF0","PF1","PF2","PF3","PF4","PF5"; + allwinner,pins = "PF0", "PF1", "PF2", + "PF3", "PF4", "PF5"; allwinner,function = "mmc0"; allwinner,drive = <SUN4I_PINCTRL_30_MA>; allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; @@ -719,43 +799,85 @@ allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; }; - ir0_pins_a: ir0@0 { - allwinner,pins = "PB3","PB4"; + ir0_rx_pins_a: ir0@0 { + allwinner,pins = "PB4"; allwinner,function = "ir0"; allwinner,drive = <SUN4I_PINCTRL_10_MA>; allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; - ir1_pins_a: ir1@0 { - allwinner,pins = "PB22","PB23"; + ir0_tx_pins_a: ir0@1 { + allwinner,pins = "PB3"; + allwinner,function = "ir0"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + }; + + ir1_rx_pins_a: ir1@0 { + allwinner,pins = "PB23"; + allwinner,function = "ir1"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + }; + + ir1_tx_pins_a: ir1@1 { + allwinner,pins = "PB22"; allwinner,function = "ir1"; allwinner,drive = <SUN4I_PINCTRL_10_MA>; allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; spi0_pins_a: spi0@0 { - allwinner,pins = "PI10", "PI11", "PI12", "PI13"; + allwinner,pins = "PI11", "PI12", "PI13"; + allwinner,function = "spi0"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + }; + + spi0_cs0_pins_a: spi0_cs0@0 { + allwinner,pins = "PI10"; allwinner,function = "spi0"; allwinner,drive = <SUN4I_PINCTRL_10_MA>; allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; spi1_pins_a: spi1@0 { - allwinner,pins = "PI16", "PI17", "PI18", "PI19"; + allwinner,pins = "PI17", "PI18", "PI19"; + allwinner,function = "spi1"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + }; + + spi1_cs0_pins_a: spi1_cs0@0 { + allwinner,pins = "PI16"; allwinner,function = "spi1"; allwinner,drive = <SUN4I_PINCTRL_10_MA>; allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; spi2_pins_a: spi2@0 { - allwinner,pins = "PB14", "PB15", "PB16", "PB17"; + allwinner,pins = "PC20", "PC21", "PC22"; allwinner,function = "spi2"; allwinner,drive = <SUN4I_PINCTRL_10_MA>; allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; spi2_pins_b: spi2@1 { - allwinner,pins = "PC19", "PC20", "PC21", "PC22"; + allwinner,pins = "PB15", "PB16", "PB17"; + allwinner,function = "spi2"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + }; + + spi2_cs0_pins_a: spi2_cs0@0 { + allwinner,pins = "PC19"; + allwinner,function = "spi2"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + }; + + spi2_cs0_pins_b: spi2_cs0@1 { + allwinner,pins = "PB14"; allwinner,function = "spi2"; allwinner,drive = <SUN4I_PINCTRL_10_MA>; allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; diff --git a/arch/arm/boot/dts/sun5i-a10s-auxtek-t004.dts b/arch/arm/boot/dts/sun5i-a10s-auxtek-t004.dts new file mode 100644 index 000000000..2b3511ea2 --- /dev/null +++ b/arch/arm/boot/dts/sun5i-a10s-auxtek-t004.dts @@ -0,0 +1,154 @@ +/* + * Copyright 2015 Hans de Goede <hdegoede@redhat.com> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; +#include "sun5i-a10s.dtsi" +#include "sunxi-common-regulators.dtsi" +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/pinctrl/sun4i-a10.h> + +/ { + model = "Auxtek t004 A10s hdmi tv-stick"; + compatible = "allwinner,auxtek-t004", "allwinner,sun5i-a10s"; + + aliases { + serial0 = &uart0; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&led_pins_t004>; + + red { + label = "t004-tv-dongle:red:usr"; + gpios = <&pio 1 2 GPIO_ACTIVE_HIGH>; /* PB2 */ + default-state = "on"; + }; + }; + + reg_vmmc1: vmmc1 { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&mmc1_vcc_en_pin_t004>; + regulator-name = "vmmc1"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + enable-active-high; + gpio = <&pio 1 18 GPIO_ACTIVE_HIGH>; /* PB18 */ + }; +}; + +&ehci0 { + status = "okay"; +}; + +&mmc0 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_t004>; + vmmc-supply = <®_vcc3v3>; + bus-width = <4>; + cd-gpios = <&pio 6 1 GPIO_ACTIVE_HIGH>; /* PG1 */ + cd-inverted; + status = "okay"; +}; + +&mmc1 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc1_pins_a>; + vmmc-supply = <®_vmmc1>; + bus-width = <4>; + non-removable; + cap-sdio-irq; + status = "okay"; +}; + +&ohci0 { + status = "okay"; +}; + +&pio { + mmc0_cd_pin_t004: mmc0_cd_pin@0 { + allwinner,pins = "PG1"; + allwinner,function = "gpio_in"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; + }; + + mmc1_vcc_en_pin_t004: mmc1_vcc_en_pin@0 { + allwinner,pins = "PB18"; + allwinner,function = "gpio_out"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + }; + + led_pins_t004: led_pins@0 { + allwinner,pins = "PB2"; + allwinner,function = "gpio_out"; + allwinner,drive = <SUN4I_PINCTRL_20_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + }; +}; + +®_usb1_vbus { + gpio = <&pio 6 13 GPIO_ACTIVE_HIGH>; /* PG13 */ + status = "okay"; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pins_a>; + status = "okay"; +}; + +&usb1_vbus_pin_a { + allwinner,pins = "PG13"; +}; + +&usbphy { + usb1_vbus-supply = <®_usb1_vbus>; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/sun5i-a10s-mk802.dts b/arch/arm/boot/dts/sun5i-a10s-mk802.dts index b21af87d9..46ff94078 100644 --- a/arch/arm/boot/dts/sun5i-a10s-mk802.dts +++ b/arch/arm/boot/dts/sun5i-a10s-mk802.dts @@ -16,11 +16,6 @@ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * You should have received a copy of the GNU General Public - * License along with this file; if not, write to the Free - * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, - * MA 02110-1301 USA - * * Or, alternatively, * * b) Permission is hereby granted, free of charge, to any person @@ -54,6 +49,14 @@ model = "MK802-A10s"; compatible = "allwinner,a10s-mk802", "allwinner,sun5i-a10s"; + aliases { + serial0 = &uart0; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + leds { compatible = "gpio-leds"; pinctrl-names = "default"; diff --git a/arch/arm/boot/dts/sun5i-a10s-olinuxino-micro.dts b/arch/arm/boot/dts/sun5i-a10s-olinuxino-micro.dts index 2bbc93b93..a7e19e484 100644 --- a/arch/arm/boot/dts/sun5i-a10s-olinuxino-micro.dts +++ b/arch/arm/boot/dts/sun5i-a10s-olinuxino-micro.dts @@ -18,11 +18,6 @@ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * You should have received a copy of the GNU General Public - * License along with this file; if not, write to the Free - * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, - * MA 02110-1301 USA - * * Or, alternatively, * * b) Permission is hereby granted, free of charge, to any person @@ -65,184 +60,191 @@ serial2 = &uart3; }; - soc@01c00000 { - emac: ethernet@01c0b000 { - pinctrl-names = "default"; - pinctrl-0 = <&emac_pins_a>; - phy = <&phy1>; - status = "okay"; - }; + chosen { + stdout-path = "serial0:115200n8"; + }; - mdio@01c0b080 { - status = "okay"; + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&led_pins_olinuxino>; - phy1: ethernet-phy@1 { - reg = <1>; - }; + green { + label = "a10s-olinuxino-micro:green:usr"; + gpios = <&pio 4 3 GPIO_ACTIVE_HIGH>; + default-state = "on"; }; + }; +}; - mmc0: mmc@01c0f000 { - pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_olinuxino_micro>; - vmmc-supply = <®_vcc3v3>; - bus-width = <4>; - cd-gpios = <&pio 6 1 GPIO_ACTIVE_HIGH>; /* PG1 */ - cd-inverted; - status = "okay"; - }; +&ehci0 { + status = "okay"; +}; - mmc1: mmc@01c10000 { - pinctrl-names = "default"; - pinctrl-0 = <&mmc1_pins_a>, <&mmc1_cd_pin_olinuxino_micro>; - vmmc-supply = <®_vcc3v3>; - bus-width = <4>; - cd-gpios = <&pio 6 13 GPIO_ACTIVE_HIGH>; /* PG13 */ - cd-inverted; - status = "okay"; - }; +&emac { + pinctrl-names = "default"; + pinctrl-0 = <&emac_pins_a>; + phy = <&phy1>; + status = "okay"; +}; - usbphy: phy@01c13400 { - usb1_vbus-supply = <®_usb1_vbus>; - status = "okay"; - }; +&emac_sram { + status = "okay"; +}; - ehci0: usb@01c14000 { - status = "okay"; - }; +&i2c0 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins_a>; + status = "okay"; +}; - ohci0: usb@01c14400 { - status = "okay"; - }; +&i2c1 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_pins_a>; + status = "okay"; - pinctrl@01c20800 { - mmc0_cd_pin_olinuxino_micro: mmc0_cd_pin@0 { - allwinner,pins = "PG1"; - allwinner,function = "gpio_in"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; - }; - - mmc1_cd_pin_olinuxino_micro: mmc1_cd_pin@0 { - allwinner,pins = "PG13"; - allwinner,function = "gpio_in"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; - }; - - led_pins_olinuxino: led_pins@0 { - allwinner,pins = "PE3"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_20_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; - }; - - usb1_vbus_pin_olinuxino_m: usb1_vbus_pin@0 { - allwinner,pins = "PB10"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; - }; - }; + at24@50 { + compatible = "at,24c16"; + pagesize = <16>; + reg = <0x50>; + read-only; + }; +}; - lradc: lradc@01c22800 { - vref-supply = <®_vcc3v0>; - status = "okay"; - - button@191 { - label = "Volume Up"; - linux,code = <KEY_VOLUMEUP>; - channel = <0>; - voltage = <191274>; - }; - - button@392 { - label = "Volume Down"; - linux,code = <KEY_VOLUMEDOWN>; - channel = <0>; - voltage = <392644>; - }; - - button@601 { - label = "Menu"; - linux,code = <KEY_MENU>; - channel = <0>; - voltage = <601151>; - }; - - button@795 { - label = "Enter"; - linux,code = <KEY_ENTER>; - channel = <0>; - voltage = <795090>; - }; - - button@987 { - label = "Home"; - linux,code = <KEY_HOMEPAGE>; - channel = <0>; - voltage = <987387>; - }; - }; +&i2c2 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c2_pins_a>; + status = "okay"; +}; - uart0: serial@01c28000 { - pinctrl-names = "default"; - pinctrl-0 = <&uart0_pins_a>; - status = "okay"; - }; +&lradc { + vref-supply = <®_vcc3v0>; + status = "okay"; - uart2: serial@01c28800 { - pinctrl-names = "default"; - pinctrl-0 = <&uart2_pins_a>; - status = "okay"; - }; + button@191 { + label = "Volume Up"; + linux,code = <KEY_VOLUMEUP>; + channel = <0>; + voltage = <191274>; + }; - uart3: serial@01c28c00 { - pinctrl-names = "default"; - pinctrl-0 = <&uart3_pins_a>; - status = "okay"; - }; + button@392 { + label = "Volume Down"; + linux,code = <KEY_VOLUMEDOWN>; + channel = <0>; + voltage = <392644>; + }; - i2c0: i2c@01c2ac00 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c0_pins_a>; - status = "okay"; - }; + button@601 { + label = "Menu"; + linux,code = <KEY_MENU>; + channel = <0>; + voltage = <601151>; + }; - i2c1: i2c@01c2b000 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c1_pins_a>; - status = "okay"; - - at24@50 { - compatible = "at,24c16"; - pagesize = <16>; - reg = <0x50>; - read-only; - }; - }; + button@795 { + label = "Enter"; + linux,code = <KEY_ENTER>; + channel = <0>; + voltage = <795090>; + }; - i2c2: i2c@01c2b400 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c2_pins_a>; - status = "okay"; - }; + button@987 { + label = "Home"; + linux,code = <KEY_HOMEPAGE>; + channel = <0>; + voltage = <987387>; }; +}; - leds { - compatible = "gpio-leds"; - pinctrl-names = "default"; - pinctrl-0 = <&led_pins_olinuxino>; +&mdio { + status = "okay"; - green { - label = "a10s-olinuxino-micro:green:usr"; - gpios = <&pio 4 3 GPIO_ACTIVE_HIGH>; - default-state = "on"; - }; + phy1: ethernet-phy@1 { + reg = <1>; }; +}; + +&mmc0 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_olinuxino_micro>; + vmmc-supply = <®_vcc3v3>; + bus-width = <4>; + cd-gpios = <&pio 6 1 GPIO_ACTIVE_HIGH>; /* PG1 */ + cd-inverted; + status = "okay"; +}; + +&mmc1 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc1_pins_a>, <&mmc1_cd_pin_olinuxino_micro>; + vmmc-supply = <®_vcc3v3>; + bus-width = <4>; + cd-gpios = <&pio 6 13 GPIO_ACTIVE_HIGH>; /* PG13 */ + cd-inverted; + status = "okay"; +}; + +&ohci0 { + status = "okay"; +}; - reg_usb1_vbus: usb1-vbus { - pinctrl-0 = <&usb1_vbus_pin_olinuxino_m>; - gpio = <&pio 1 10 GPIO_ACTIVE_HIGH>; - status = "okay"; +&pio { + mmc0_cd_pin_olinuxino_micro: mmc0_cd_pin@0 { + allwinner,pins = "PG1"; + allwinner,function = "gpio_in"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; }; + + mmc1_cd_pin_olinuxino_micro: mmc1_cd_pin@0 { + allwinner,pins = "PG13"; + allwinner,function = "gpio_in"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; + }; + + led_pins_olinuxino: led_pins@0 { + allwinner,pins = "PE3"; + allwinner,function = "gpio_out"; + allwinner,drive = <SUN4I_PINCTRL_20_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + }; + + usb1_vbus_pin_olinuxino_m: usb1_vbus_pin@0 { + allwinner,pins = "PB10"; + allwinner,function = "gpio_out"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + }; +}; + +®_usb1_vbus { + pinctrl-0 = <&usb1_vbus_pin_olinuxino_m>; + gpio = <&pio 1 10 GPIO_ACTIVE_HIGH>; + status = "okay"; }; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pins_a>; + status = "okay"; +}; + +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&uart2_pins_a>; + status = "okay"; +}; + +&uart3 { + pinctrl-names = "default"; + pinctrl-0 = <&uart3_pins_a>; + status = "okay"; +}; + +&usbphy { + usb1_vbus-supply = <®_usb1_vbus>; + status = "okay"; +}; + diff --git a/arch/arm/boot/dts/sun5i-a10s-r7-tv-dongle.dts b/arch/arm/boot/dts/sun5i-a10s-r7-tv-dongle.dts index 7deddfc9d..3b057983c 100644 --- a/arch/arm/boot/dts/sun5i-a10s-r7-tv-dongle.dts +++ b/arch/arm/boot/dts/sun5i-a10s-r7-tv-dongle.dts @@ -16,11 +16,6 @@ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * You should have received a copy of the GNU General Public - * License along with this file; if not, write to the Free - * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, - * MA 02110-1301 USA - * * Or, alternatively, * * b) Permission is hereby granted, free of charge, to any person @@ -56,67 +51,12 @@ model = "R7 A10s hdmi tv-stick"; compatible = "allwinner,r7-tv-dongle", "allwinner,sun5i-a10s"; - soc@01c00000 { - mmc0: mmc@01c0f000 { - pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_r7>; - vmmc-supply = <®_vcc3v3>; - bus-width = <4>; - cd-gpios = <&pio 6 1 GPIO_ACTIVE_HIGH>; /* PG1 */ - cd-inverted; - status = "okay"; - }; - - mmc1: mmc@01c10000 { - pinctrl-names = "default"; - pinctrl-0 = <&mmc1_pins_a>; - vmmc-supply = <®_vcc3v3>; - bus-width = <4>; - non-removable; - status = "okay"; - }; - - usbphy: phy@01c13400 { - usb1_vbus-supply = <®_usb1_vbus>; - status = "okay"; - }; - - ehci0: usb@01c14000 { - status = "okay"; - }; - - ohci0: usb@01c14400 { - status = "okay"; - }; - - pinctrl@01c20800 { - mmc0_cd_pin_r7: mmc0_cd_pin@0 { - allwinner,pins = "PG1"; - allwinner,function = "gpio_in"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; - }; - - led_pins_r7: led_pins@0 { - allwinner,pins = "PB2"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_20_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; - }; - - usb1_vbus_pin_r7: usb1_vbus_pin@0 { - allwinner,pins = "PG13"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; - }; - }; + aliases { + serial0 = &uart0; + }; - uart0: serial@01c28000 { - pinctrl-names = "default"; - pinctrl-0 = <&uart0_pins_a>; - status = "okay"; - }; + chosen { + stdout-path = "serial0:115200n8"; }; leds { @@ -130,10 +70,71 @@ default-state = "on"; }; }; +}; + +&ehci0 { + status = "okay"; +}; - reg_usb1_vbus: usb1-vbus { - pinctrl-0 = <&usb1_vbus_pin_r7>; - gpio = <&pio 6 13 GPIO_ACTIVE_HIGH>; - status = "okay"; +&mmc0 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_r7>; + vmmc-supply = <®_vcc3v3>; + bus-width = <4>; + cd-gpios = <&pio 6 1 GPIO_ACTIVE_HIGH>; /* PG1 */ + cd-inverted; + status = "okay"; +}; + +&mmc1 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc1_pins_a>; + vmmc-supply = <®_vcc3v3>; + bus-width = <4>; + non-removable; + status = "okay"; +}; + +&ohci0 { + status = "okay"; +}; + +&pio { + mmc0_cd_pin_r7: mmc0_cd_pin@0 { + allwinner,pins = "PG1"; + allwinner,function = "gpio_in"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; + }; + + led_pins_r7: led_pins@0 { + allwinner,pins = "PB2"; + allwinner,function = "gpio_out"; + allwinner,drive = <SUN4I_PINCTRL_20_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; + + usb1_vbus_pin_r7: usb1_vbus_pin@0 { + allwinner,pins = "PG13"; + allwinner,function = "gpio_out"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + }; +}; + +®_usb1_vbus { + pinctrl-0 = <&usb1_vbus_pin_r7>; + gpio = <&pio 6 13 GPIO_ACTIVE_HIGH>; + status = "okay"; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pins_a>; + status = "okay"; +}; + +&usbphy { + usb1_vbus-supply = <®_usb1_vbus>; + status = "okay"; }; diff --git a/arch/arm/boot/dts/sun5i-a10s.dtsi b/arch/arm/boot/dts/sun5i-a10s.dtsi index 3794ca164..f11efb722 100644 --- a/arch/arm/boot/dts/sun5i-a10s.dtsi +++ b/arch/arm/boot/dts/sun5i-a10s.dtsi @@ -3,16 +3,49 @@ * * Maxime Ripard <maxime.ripard@free-electrons.com> * - * The code contained herein is licensed under the GNU General Public - * License. You may obtain a copy of the GNU General Public License - * Version 2 or later at the following locations: + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. * - * http://www.opensource.org/licenses/gpl-license.html - * http://www.gnu.org/copyleft/gpl.html + * a) This library is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This library is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. */ #include "skeleton.dtsi" +#include "sun5i.dtsi" + #include <dt-bindings/dma/sun4i-a10.h> #include <dt-bindings/pinctrl/sun4i-a10.h> @@ -29,7 +62,8 @@ ranges; framebuffer@0 { - compatible = "allwinner,simple-framebuffer", "simple-framebuffer"; + compatible = "allwinner,simple-framebuffer", + "simple-framebuffer"; allwinner,pipeline = "de_be0-lcd0-hdmi"; clocks = <&pll5 1>, <&ahb_gates 36>, <&ahb_gates 43>, <&ahb_gates 44>; @@ -45,133 +79,23 @@ }; }; - cpus { - cpu@0 { - compatible = "arm,cortex-a8"; - }; - }; - - memory { - reg = <0x40000000 0x20000000>; - }; - clocks { - #address-cells = <1>; - #size-cells = <1>; - ranges; - - /* - * This is a dummy clock, to be used as placeholder on - * other mux clocks when a specific parent clock is not - * yet implemented. It should be dropped when the driver - * is complete. - */ - dummy: dummy { - #clock-cells = <0>; - compatible = "fixed-clock"; - clock-frequency = <0>; - }; - - osc24M: clk@01c20050 { - #clock-cells = <0>; - compatible = "allwinner,sun4i-a10-osc-clk"; - reg = <0x01c20050 0x4>; - clock-frequency = <24000000>; - clock-output-names = "osc24M"; - }; - - osc32k: clk@0 { - #clock-cells = <0>; - compatible = "fixed-clock"; - clock-frequency = <32768>; - clock-output-names = "osc32k"; - }; - - pll1: clk@01c20000 { - #clock-cells = <0>; - compatible = "allwinner,sun4i-a10-pll1-clk"; - reg = <0x01c20000 0x4>; - clocks = <&osc24M>; - clock-output-names = "pll1"; - }; - - pll4: clk@01c20018 { - #clock-cells = <0>; - compatible = "allwinner,sun4i-a10-pll1-clk"; - reg = <0x01c20018 0x4>; - clocks = <&osc24M>; - clock-output-names = "pll4"; - }; - - pll5: clk@01c20020 { - #clock-cells = <1>; - compatible = "allwinner,sun4i-a10-pll5-clk"; - reg = <0x01c20020 0x4>; - clocks = <&osc24M>; - clock-output-names = "pll5_ddr", "pll5_other"; - }; - - pll6: clk@01c20028 { - #clock-cells = <1>; - compatible = "allwinner,sun4i-a10-pll6-clk"; - reg = <0x01c20028 0x4>; - clocks = <&osc24M>; - clock-output-names = "pll6_sata", "pll6_other", "pll6"; - }; - - /* dummy is 200M */ - cpu: cpu@01c20054 { - #clock-cells = <0>; - compatible = "allwinner,sun4i-a10-cpu-clk"; - reg = <0x01c20054 0x4>; - clocks = <&osc32k>, <&osc24M>, <&pll1>, <&dummy>; - clock-output-names = "cpu"; - }; - - axi: axi@01c20054 { - #clock-cells = <0>; - compatible = "allwinner,sun4i-a10-axi-clk"; - reg = <0x01c20054 0x4>; - clocks = <&cpu>; - clock-output-names = "axi"; - }; - - axi_gates: clk@01c2005c { - #clock-cells = <1>; - compatible = "allwinner,sun4i-a10-axi-gates-clk"; - reg = <0x01c2005c 0x4>; - clocks = <&axi>; - clock-output-names = "axi_dram"; - }; - - ahb: ahb@01c20054 { - #clock-cells = <0>; - compatible = "allwinner,sun4i-a10-ahb-clk"; - reg = <0x01c20054 0x4>; - clocks = <&axi>; - clock-output-names = "ahb"; - }; - ahb_gates: clk@01c20060 { #clock-cells = <1>; compatible = "allwinner,sun5i-a10s-ahb-gates-clk"; reg = <0x01c20060 0x8>; clocks = <&ahb>; - clock-output-names = "ahb_usbotg", "ahb_ehci", "ahb_ohci", - "ahb_ss", "ahb_dma", "ahb_bist", "ahb_mmc0", - "ahb_mmc1", "ahb_mmc2", "ahb_nand", "ahb_sdram", - "ahb_emac", "ahb_ts", "ahb_spi0", "ahb_spi1", - "ahb_spi2", "ahb_gps", "ahb_stimer", "ahb_ve", - "ahb_tve", "ahb_lcd", "ahb_csi", "ahb_hdmi", - "ahb_de_be", "ahb_de_fe", "ahb_iep", "ahb_mali400"; - }; - - apb0: apb0@01c20054 { - #clock-cells = <0>; - compatible = "allwinner,sun4i-a10-apb0-clk"; - reg = <0x01c20054 0x4>; - clocks = <&ahb>; - clock-output-names = "apb0"; + clock-output-names = "ahb_usbotg", "ahb_ehci", + "ahb_ohci", "ahb_ss", "ahb_dma", + "ahb_bist", "ahb_mmc0", "ahb_mmc1", + "ahb_mmc2", "ahb_nand", + "ahb_sdram", "ahb_emac", "ahb_ts", + "ahb_spi0", "ahb_spi1", "ahb_spi2", + "ahb_gps", "ahb_stimer", "ahb_ve", + "ahb_tve", "ahb_lcd", "ahb_csi", + "ahb_hdmi", "ahb_de_be", + "ahb_de_fe", "ahb_iep", + "ahb_mali400"; }; apb0_gates: clk@01c20068 { @@ -179,16 +103,9 @@ compatible = "allwinner,sun5i-a10s-apb0-gates-clk"; reg = <0x01c20068 0x4>; clocks = <&apb0>; - clock-output-names = "apb0_codec", "apb0_iis", "apb0_pio", - "apb0_ir", "apb0_keypad"; - }; - - apb1: clk@01c20058 { - #clock-cells = <0>; - compatible = "allwinner,sun4i-a10-apb1-clk"; - reg = <0x01c20058 0x4>; - clocks = <&osc24M>, <&pll6 1>, <&osc32k>; - clock-output-names = "apb1"; + clock-output-names = "apb0_codec", "apb0_iis", + "apb0_pio", "apb0_ir", + "apb0_keypad"; }; apb1_gates: clk@01c2006c { @@ -200,166 +117,15 @@ "apb1_i2c2", "apb1_uart0", "apb1_uart1", "apb1_uart2", "apb1_uart3"; }; - - nand_clk: clk@01c20080 { - #clock-cells = <0>; - compatible = "allwinner,sun4i-a10-mod0-clk"; - reg = <0x01c20080 0x4>; - clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; - clock-output-names = "nand"; - }; - - ms_clk: clk@01c20084 { - #clock-cells = <0>; - compatible = "allwinner,sun4i-a10-mod0-clk"; - reg = <0x01c20084 0x4>; - clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; - clock-output-names = "ms"; - }; - - mmc0_clk: clk@01c20088 { - #clock-cells = <1>; - compatible = "allwinner,sun4i-a10-mmc-clk"; - reg = <0x01c20088 0x4>; - clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; - clock-output-names = "mmc0", - "mmc0_output", - "mmc0_sample"; - }; - - mmc1_clk: clk@01c2008c { - #clock-cells = <1>; - compatible = "allwinner,sun4i-a10-mmc-clk"; - reg = <0x01c2008c 0x4>; - clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; - clock-output-names = "mmc1", - "mmc1_output", - "mmc1_sample"; - }; - - mmc2_clk: clk@01c20090 { - #clock-cells = <1>; - compatible = "allwinner,sun4i-a10-mmc-clk"; - reg = <0x01c20090 0x4>; - clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; - clock-output-names = "mmc2", - "mmc2_output", - "mmc2_sample"; - }; - - ts_clk: clk@01c20098 { - #clock-cells = <0>; - compatible = "allwinner,sun4i-a10-mod0-clk"; - reg = <0x01c20098 0x4>; - clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; - clock-output-names = "ts"; - }; - - ss_clk: clk@01c2009c { - #clock-cells = <0>; - compatible = "allwinner,sun4i-a10-mod0-clk"; - reg = <0x01c2009c 0x4>; - clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; - clock-output-names = "ss"; - }; - - spi0_clk: clk@01c200a0 { - #clock-cells = <0>; - compatible = "allwinner,sun4i-a10-mod0-clk"; - reg = <0x01c200a0 0x4>; - clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; - clock-output-names = "spi0"; - }; - - spi1_clk: clk@01c200a4 { - #clock-cells = <0>; - compatible = "allwinner,sun4i-a10-mod0-clk"; - reg = <0x01c200a4 0x4>; - clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; - clock-output-names = "spi1"; - }; - - spi2_clk: clk@01c200a8 { - #clock-cells = <0>; - compatible = "allwinner,sun4i-a10-mod0-clk"; - reg = <0x01c200a8 0x4>; - clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; - clock-output-names = "spi2"; - }; - - ir0_clk: clk@01c200b0 { - #clock-cells = <0>; - compatible = "allwinner,sun4i-a10-mod0-clk"; - reg = <0x01c200b0 0x4>; - clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; - clock-output-names = "ir0"; - }; - - usb_clk: clk@01c200cc { - #clock-cells = <1>; - #reset-cells = <1>; - compatible = "allwinner,sun5i-a13-usb-clk"; - reg = <0x01c200cc 0x4>; - clocks = <&pll6 1>; - clock-output-names = "usb_ohci0", "usb_phy"; - }; - - mbus_clk: clk@01c2015c { - #clock-cells = <0>; - compatible = "allwinner,sun5i-a13-mbus-clk"; - reg = <0x01c2015c 0x4>; - clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; - clock-output-names = "mbus"; - }; }; soc@01c00000 { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <1>; - ranges; - - dma: dma-controller@01c02000 { - compatible = "allwinner,sun4i-a10-dma"; - reg = <0x01c02000 0x1000>; - interrupts = <27>; - clocks = <&ahb_gates 6>; - #dma-cells = <2>; - }; - - spi0: spi@01c05000 { - compatible = "allwinner,sun4i-a10-spi"; - reg = <0x01c05000 0x1000>; - interrupts = <10>; - clocks = <&ahb_gates 20>, <&spi0_clk>; - clock-names = "ahb", "mod"; - dmas = <&dma SUN4I_DMA_DEDICATED 27>, - <&dma SUN4I_DMA_DEDICATED 26>; - dma-names = "rx", "tx"; - status = "disabled"; - #address-cells = <1>; - #size-cells = <0>; - }; - - spi1: spi@01c06000 { - compatible = "allwinner,sun4i-a10-spi"; - reg = <0x01c06000 0x1000>; - interrupts = <11>; - clocks = <&ahb_gates 21>, <&spi1_clk>; - clock-names = "ahb", "mod"; - dmas = <&dma SUN4I_DMA_DEDICATED 9>, - <&dma SUN4I_DMA_DEDICATED 8>; - dma-names = "rx", "tx"; - status = "disabled"; - #address-cells = <1>; - #size-cells = <0>; - }; - emac: ethernet@01c0b000 { compatible = "allwinner,sun4i-a10-emac"; reg = <0x01c0b000 0x1000>; interrupts = <55>; clocks = <&ahb_gates 17>; + allwinner,sram = <&emac_sram 1>; status = "disabled"; }; @@ -371,214 +137,6 @@ #size-cells = <0>; }; - mmc0: mmc@01c0f000 { - compatible = "allwinner,sun5i-a13-mmc"; - reg = <0x01c0f000 0x1000>; - clocks = <&ahb_gates 8>, - <&mmc0_clk 0>, - <&mmc0_clk 1>, - <&mmc0_clk 2>; - clock-names = "ahb", - "mmc", - "output", - "sample"; - interrupts = <32>; - status = "disabled"; - }; - - mmc1: mmc@01c10000 { - compatible = "allwinner,sun5i-a13-mmc"; - reg = <0x01c10000 0x1000>; - clocks = <&ahb_gates 9>, - <&mmc1_clk 0>, - <&mmc1_clk 1>, - <&mmc1_clk 2>; - clock-names = "ahb", - "mmc", - "output", - "sample"; - interrupts = <33>; - status = "disabled"; - }; - - mmc2: mmc@01c11000 { - compatible = "allwinner,sun5i-a13-mmc"; - reg = <0x01c11000 0x1000>; - clocks = <&ahb_gates 10>, - <&mmc2_clk 0>, - <&mmc2_clk 1>, - <&mmc2_clk 2>; - clock-names = "ahb", - "mmc", - "output", - "sample"; - interrupts = <34>; - status = "disabled"; - }; - - usbphy: phy@01c13400 { - #phy-cells = <1>; - compatible = "allwinner,sun5i-a13-usb-phy"; - reg = <0x01c13400 0x10 0x01c14800 0x4>; - reg-names = "phy_ctrl", "pmu1"; - clocks = <&usb_clk 8>; - clock-names = "usb_phy"; - resets = <&usb_clk 0>, <&usb_clk 1>; - reset-names = "usb0_reset", "usb1_reset"; - status = "disabled"; - }; - - ehci0: usb@01c14000 { - compatible = "allwinner,sun5i-a10s-ehci", "generic-ehci"; - reg = <0x01c14000 0x100>; - interrupts = <39>; - clocks = <&ahb_gates 1>; - phys = <&usbphy 1>; - phy-names = "usb"; - status = "disabled"; - }; - - ohci0: usb@01c14400 { - compatible = "allwinner,sun5i-a10s-ohci", "generic-ohci"; - reg = <0x01c14400 0x100>; - interrupts = <40>; - clocks = <&usb_clk 6>, <&ahb_gates 2>; - phys = <&usbphy 1>; - phy-names = "usb"; - status = "disabled"; - }; - - spi2: spi@01c17000 { - compatible = "allwinner,sun4i-a10-spi"; - reg = <0x01c17000 0x1000>; - interrupts = <12>; - clocks = <&ahb_gates 22>, <&spi2_clk>; - clock-names = "ahb", "mod"; - dmas = <&dma SUN4I_DMA_DEDICATED 29>, - <&dma SUN4I_DMA_DEDICATED 28>; - dma-names = "rx", "tx"; - status = "disabled"; - #address-cells = <1>; - #size-cells = <0>; - }; - - intc: interrupt-controller@01c20400 { - compatible = "allwinner,sun4i-a10-ic"; - reg = <0x01c20400 0x400>; - interrupt-controller; - #interrupt-cells = <1>; - }; - - pio: pinctrl@01c20800 { - compatible = "allwinner,sun5i-a10s-pinctrl"; - reg = <0x01c20800 0x400>; - interrupts = <28>; - clocks = <&apb0_gates 5>; - gpio-controller; - interrupt-controller; - #interrupt-cells = <2>; - #size-cells = <0>; - #gpio-cells = <3>; - - uart0_pins_a: uart0@0 { - allwinner,pins = "PB19", "PB20"; - allwinner,function = "uart0"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; - }; - - uart2_pins_a: uart2@0 { - allwinner,pins = "PC18", "PC19"; - allwinner,function = "uart2"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; - }; - - uart3_pins_a: uart3@0 { - allwinner,pins = "PG9", "PG10"; - allwinner,function = "uart3"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; - }; - - emac_pins_a: emac0@0 { - allwinner,pins = "PA0", "PA1", "PA2", - "PA3", "PA4", "PA5", "PA6", - "PA7", "PA8", "PA9", "PA10", - "PA11", "PA12", "PA13", "PA14", - "PA15", "PA16"; - allwinner,function = "emac"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; - }; - - i2c0_pins_a: i2c0@0 { - allwinner,pins = "PB0", "PB1"; - allwinner,function = "i2c0"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; - }; - - i2c1_pins_a: i2c1@0 { - allwinner,pins = "PB15", "PB16"; - allwinner,function = "i2c1"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; - }; - - i2c2_pins_a: i2c2@0 { - allwinner,pins = "PB17", "PB18"; - allwinner,function = "i2c2"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; - }; - - mmc0_pins_a: mmc0@0 { - allwinner,pins = "PF0","PF1","PF2","PF3","PF4","PF5"; - allwinner,function = "mmc0"; - allwinner,drive = <SUN4I_PINCTRL_30_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; - }; - - mmc1_pins_a: mmc1@0 { - allwinner,pins = "PG3","PG4","PG5","PG6","PG7","PG8"; - allwinner,function = "mmc1"; - allwinner,drive = <SUN4I_PINCTRL_30_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; - }; - }; - - timer@01c20c00 { - compatible = "allwinner,sun4i-a10-timer"; - reg = <0x01c20c00 0x90>; - interrupts = <22>; - clocks = <&osc24M>; - }; - - wdt: watchdog@01c20c90 { - compatible = "allwinner,sun4i-a10-wdt"; - reg = <0x01c20c90 0x10>; - }; - - lradc: lradc@01c22800 { - compatible = "allwinner,sun4i-a10-lradc-keys"; - reg = <0x01c22800 0x100>; - interrupts = <31>; - status = "disabled"; - }; - - sid: eeprom@01c23800 { - compatible = "allwinner,sun4i-a10-sid"; - reg = <0x01c23800 0x10>; - }; - - rtp: rtp@01c25000 { - compatible = "allwinner,sun5i-a13-ts"; - reg = <0x01c25000 0x100>; - interrupts = <29>; - #thermal-sensor-cells = <0>; - }; - uart0: serial@01c28000 { compatible = "snps,dw-apb-uart"; reg = <0x01c28000 0x400>; @@ -589,16 +147,6 @@ status = "disabled"; }; - uart1: serial@01c28400 { - compatible = "snps,dw-apb-uart"; - reg = <0x01c28400 0x400>; - interrupts = <2>; - reg-shift = <2>; - reg-io-width = <4>; - clocks = <&apb1_gates 17>; - status = "disabled"; - }; - uart2: serial@01c28800 { compatible = "snps,dw-apb-uart"; reg = <0x01c28800 0x400>; @@ -608,52 +156,57 @@ clocks = <&apb1_gates 18>; status = "disabled"; }; + }; +}; - uart3: serial@01c28c00 { - compatible = "snps,dw-apb-uart"; - reg = <0x01c28c00 0x400>; - interrupts = <4>; - reg-shift = <2>; - reg-io-width = <4>; - clocks = <&apb1_gates 19>; - status = "disabled"; - }; +&pio { + compatible = "allwinner,sun5i-a10s-pinctrl"; - i2c0: i2c@01c2ac00 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "allwinner,sun5i-a10s-i2c", "allwinner,sun4i-a10-i2c"; - reg = <0x01c2ac00 0x400>; - interrupts = <7>; - clocks = <&apb1_gates 0>; - status = "disabled"; - }; + uart0_pins_a: uart0@0 { + allwinner,pins = "PB19", "PB20"; + allwinner,function = "uart0"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + }; - i2c1: i2c@01c2b000 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "allwinner,sun5i-a10s-i2c", "allwinner,sun4i-a10-i2c"; - reg = <0x01c2b000 0x400>; - interrupts = <8>; - clocks = <&apb1_gates 1>; - status = "disabled"; - }; + uart2_pins_a: uart2@0 { + allwinner,pins = "PC18", "PC19"; + allwinner,function = "uart2"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + }; - i2c2: i2c@01c2b400 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "allwinner,sun5i-a10s-i2c", "allwinner,sun4i-a10-i2c"; - reg = <0x01c2b400 0x400>; - interrupts = <9>; - clocks = <&apb1_gates 2>; - status = "disabled"; - }; + uart3_pins_a: uart3@0 { + allwinner,pins = "PG9", "PG10"; + allwinner,function = "uart3"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + }; - timer@01c60000 { - compatible = "allwinner,sun5i-a13-hstimer"; - reg = <0x01c60000 0x1000>; - interrupts = <82>, <83>; - clocks = <&ahb_gates 28>; - }; + emac_pins_a: emac0@0 { + allwinner,pins = "PA0", "PA1", "PA2", + "PA3", "PA4", "PA5", "PA6", + "PA7", "PA8", "PA9", "PA10", + "PA11", "PA12", "PA13", "PA14", + "PA15", "PA16"; + allwinner,function = "emac"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + }; + + mmc1_pins_a: mmc1@0 { + allwinner,pins = "PG3", "PG4", "PG5", + "PG6", "PG7", "PG8"; + allwinner,function = "mmc1"; + allwinner,drive = <SUN4I_PINCTRL_30_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + }; +}; + +&sram_a { + emac_sram: sram-section@8000 { + compatible = "allwinner,sun4i-a10-sram-a3-a4"; + reg = <0x8000 0x4000>; + status = "disabled"; }; }; diff --git a/arch/arm/boot/dts/sun5i-a13-hsg-h702.dts b/arch/arm/boot/dts/sun5i-a13-hsg-h702.dts index 03aa04555..990f9d61a 100644 --- a/arch/arm/boot/dts/sun5i-a13-hsg-h702.dts +++ b/arch/arm/boot/dts/sun5i-a13-hsg-h702.dts @@ -16,11 +16,6 @@ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * You should have received a copy of the GNU General Public - * License along with this file; if not, write to the Free - * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, - * MA 02110-1301 USA - * * Or, alternatively, * * b) Permission is hereby granted, free of charge, to any person @@ -60,81 +55,72 @@ serial0 = &uart1; }; - soc@01c00000 { - mmc0: mmc@01c0f000 { - pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_h702>; - vmmc-supply = <®_vcc3v3>; - bus-width = <4>; - cd-gpios = <&pio 6 0 GPIO_ACTIVE_HIGH>; /* PG0 */ - cd-inverted; - status = "okay"; - }; - - usbphy: phy@01c13400 { - usb1_vbus-supply = <®_ldo3>; - status = "okay"; - }; - - ehci0: usb@01c14000 { - status = "okay"; - }; - - ohci0: usb@01c14400 { - status = "okay"; - }; - - pinctrl@01c20800 { - mmc0_cd_pin_h702: mmc0_cd_pin@0 { - allwinner,pins = "PG0"; - allwinner,function = "gpio_in"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; - }; - }; - - uart1: serial@01c28400 { - pinctrl-names = "default"; - pinctrl-0 = <&uart1_pins_b>; - status = "okay"; - }; - - i2c0: i2c@01c2ac00 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c0_pins_a>; - status = "okay"; - - axp209: pmic@34 { - reg = <0x34>; - interrupts = <0>; - }; - }; - - i2c1: i2c@01c2b000 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c1_pins_a>; - status = "okay"; - - pcf8563: rtc@51 { - compatible = "nxp,pcf8563"; - reg = <0x51>; - }; - }; - - i2c2: i2c@01c2b400 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c2_pins_a>; - status = "okay"; - }; + chosen { + stdout-path = "serial0:115200n8"; }; }; -#include "axp209.dtsi" - &cpu0 { cpu-supply = <®_dcdc2>; }; +&ehci0 { + status = "okay"; +}; + +&i2c0 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins_a>; + status = "okay"; + + axp209: pmic@34 { + reg = <0x34>; + interrupts = <0>; + }; +}; + +&i2c1 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_pins_a>; + status = "okay"; + + pcf8563: rtc@51 { + compatible = "nxp,pcf8563"; + reg = <0x51>; + }; +}; + +&i2c2 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c2_pins_a>; + status = "okay"; +}; + +&mmc0 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_h702>; + vmmc-supply = <®_vcc3v3>; + bus-width = <4>; + cd-gpios = <&pio 6 0 GPIO_ACTIVE_HIGH>; /* PG0 */ + cd-inverted; + status = "okay"; +}; + +&ohci0 { + status = "okay"; +}; + +&pio { + mmc0_cd_pin_h702: mmc0_cd_pin@0 { + allwinner,pins = "PG0"; + allwinner,function = "gpio_in"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; + }; +}; + +#include "axp209.dtsi" + ®_dcdc2 { regulator-always-on; regulator-min-microvolt = <1000000>; @@ -165,3 +151,14 @@ regulator-max-microvolt = <3300000>; regulator-name = "vcc-wifi"; }; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&uart1_pins_b>; + status = "okay"; +}; + +&usbphy { + usb1_vbus-supply = <®_ldo3>; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/sun5i-a13-olinuxino-micro.dts b/arch/arm/boot/dts/sun5i-a13-olinuxino-micro.dts index 03deb8426..ad84fe427 100644 --- a/arch/arm/boot/dts/sun5i-a13-olinuxino-micro.dts +++ b/arch/arm/boot/dts/sun5i-a13-olinuxino-micro.dts @@ -17,11 +17,6 @@ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * You should have received a copy of the GNU General Public - * License along with this file; if not, write to the Free - * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, - * MA 02110-1301 USA - * * Or, alternatively, * * b) Permission is hereby granted, free of charge, to any person @@ -61,76 +56,8 @@ serial0 = &uart1; }; - soc@01c00000 { - mmc0: mmc@01c0f000 { - pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_olinuxinom>; - vmmc-supply = <®_vcc3v3>; - bus-width = <4>; - cd-gpios = <&pio 6 0 GPIO_ACTIVE_HIGH>; /* PG0 */ - cd-inverted; - status = "okay"; - }; - - usbphy: phy@01c13400 { - usb1_vbus-supply = <®_usb1_vbus>; - status = "okay"; - }; - - ehci0: usb@01c14000 { - status = "okay"; - }; - - ohci0: usb@01c14400 { - status = "okay"; - }; - - pinctrl@01c20800 { - mmc0_cd_pin_olinuxinom: mmc0_cd_pin@0 { - allwinner,pins = "PG0"; - allwinner,function = "gpio_in"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; - }; - - led_pins_olinuxinom: led_pins@0 { - allwinner,pins = "PG9"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_20_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; - }; - - usb1_vbus_pin_olinuxinom: usb1_vbus_pin@0 { - allwinner,pins = "PG11"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; - }; - }; - - uart1: serial@01c28400 { - pinctrl-names = "default"; - pinctrl-0 = <&uart1_pins_b>; - status = "okay"; - }; - - i2c0: i2c@01c2ac00 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c0_pins_a>; - status = "okay"; - }; - - i2c1: i2c@01c2b000 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c1_pins_a>; - status = "okay"; - }; - - i2c2: i2c@01c2b400 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c2_pins_a>; - status = "okay"; - }; + chosen { + stdout-path = "serial0:115200n8"; }; leds { @@ -144,10 +71,80 @@ default-state = "on"; }; }; +}; + +&ehci0 { + status = "okay"; +}; - reg_usb1_vbus: usb1-vbus { - pinctrl-0 = <&usb1_vbus_pin_olinuxinom>; - gpio = <&pio 6 11 GPIO_ACTIVE_HIGH>; - status = "okay"; +&i2c0 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins_a>; + status = "okay"; +}; + +&i2c1 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_pins_a>; + status = "okay"; +}; + +&i2c2 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c2_pins_a>; + status = "okay"; +}; + +&mmc0 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_olinuxinom>; + vmmc-supply = <®_vcc3v3>; + bus-width = <4>; + cd-gpios = <&pio 6 0 GPIO_ACTIVE_HIGH>; /* PG0 */ + cd-inverted; + status = "okay"; +}; + +&ohci0 { + status = "okay"; +}; + +&pio { + mmc0_cd_pin_olinuxinom: mmc0_cd_pin@0 { + allwinner,pins = "PG0"; + allwinner,function = "gpio_in"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; }; + + led_pins_olinuxinom: led_pins@0 { + allwinner,pins = "PG9"; + allwinner,function = "gpio_out"; + allwinner,drive = <SUN4I_PINCTRL_20_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + }; + + usb1_vbus_pin_olinuxinom: usb1_vbus_pin@0 { + allwinner,pins = "PG11"; + allwinner,function = "gpio_out"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + }; +}; + +®_usb1_vbus { + pinctrl-0 = <&usb1_vbus_pin_olinuxinom>; + gpio = <&pio 6 11 GPIO_ACTIVE_HIGH>; + status = "okay"; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&uart1_pins_b>; + status = "okay"; +}; + +&usbphy { + usb1_vbus-supply = <®_usb1_vbus>; + status = "okay"; }; diff --git a/arch/arm/boot/dts/sun5i-a13-olinuxino.dts b/arch/arm/boot/dts/sun5i-a13-olinuxino.dts index 6b24876ed..42324005e 100644 --- a/arch/arm/boot/dts/sun5i-a13-olinuxino.dts +++ b/arch/arm/boot/dts/sun5i-a13-olinuxino.dts @@ -18,11 +18,6 @@ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * You should have received a copy of the GNU General Public - * License along with this file; if not, write to the Free - * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, - * MA 02110-1301 USA - * * Or, alternatively, * * b) Permission is hereby granted, free of charge, to any person @@ -63,141 +58,143 @@ serial0 = &uart1; }; - soc@01c00000 { - mmc0: mmc@01c0f000 { - pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_olinuxino>; - vmmc-supply = <®_vcc3v3>; - bus-width = <4>; - cd-gpios = <&pio 6 0 GPIO_ACTIVE_HIGH>; /* PG0 */ - cd-inverted; - status = "okay"; - }; + chosen { + stdout-path = "serial0:115200n8"; + }; - usbphy: phy@01c13400 { - usb1_vbus-supply = <®_usb1_vbus>; - status = "okay"; - }; + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&led_pins_olinuxino>; - ehci0: usb@01c14000 { - status = "okay"; + power { + gpios = <&pio 6 9 GPIO_ACTIVE_HIGH>; + default-state = "on"; }; + }; +}; - ohci0: usb@01c14400 { - status = "okay"; - }; +&ehci0 { + status = "okay"; +}; - pinctrl@01c20800 { - mmc0_cd_pin_olinuxino: mmc0_cd_pin@0 { - allwinner,pins = "PG0"; - allwinner,function = "gpio_in"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; - }; - - led_pins_olinuxino: led_pins@0 { - allwinner,pins = "PG9"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_20_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; - }; - - usb1_vbus_pin_olinuxino: usb1_vbus_pin@0 { - allwinner,pins = "PG11"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; - }; - }; +&i2c0 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins_a>; + status = "okay"; - lradc: lradc@01c22800 { - vref-supply = <®_vcc3v0>; - status = "okay"; - - button@191 { - label = "Volume Up"; - linux,code = <KEY_VOLUMEUP>; - channel = <0>; - voltage = <191274>; - }; - - button@392 { - label = "Volume Down"; - linux,code = <KEY_VOLUMEDOWN>; - channel = <0>; - voltage = <392644>; - }; - - button@601 { - label = "Menu"; - linux,code = <KEY_MENU>; - channel = <0>; - voltage = <601151>; - }; - - button@795 { - label = "Enter"; - linux,code = <KEY_ENTER>; - channel = <0>; - voltage = <795090>; - }; - - button@987 { - label = "Home"; - linux,code = <KEY_HOMEPAGE>; - channel = <0>; - voltage = <987387>; - }; - }; + axp209: pmic@34 { + compatible = "x-powers,axp209"; + reg = <0x34>; + interrupts = <0>; - uart1: serial@01c28400 { - pinctrl-names = "default"; - pinctrl-0 = <&uart1_pins_b>; - status = "okay"; - }; + interrupt-controller; + #interrupt-cells = <1>; + }; +}; - i2c0: i2c@01c2ac00 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c0_pins_a>; - status = "okay"; +&i2c1 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_pins_a>; + status = "okay"; +}; - axp209: pmic@34 { - compatible = "x-powers,axp209"; - reg = <0x34>; - interrupts = <0>; +&i2c2 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c2_pins_a>; + status = "okay"; +}; - interrupt-controller; - #interrupt-cells = <1>; - }; - }; +&lradc { + vref-supply = <®_vcc3v0>; + status = "okay"; - i2c1: i2c@01c2b000 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c1_pins_a>; - status = "okay"; - }; + button@191 { + label = "Volume Up"; + linux,code = <KEY_VOLUMEUP>; + channel = <0>; + voltage = <191274>; + }; - i2c2: i2c@01c2b400 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c2_pins_a>; - status = "okay"; - }; + button@392 { + label = "Volume Down"; + linux,code = <KEY_VOLUMEDOWN>; + channel = <0>; + voltage = <392644>; }; - leds { - compatible = "gpio-leds"; - pinctrl-names = "default"; - pinctrl-0 = <&led_pins_olinuxino>; + button@601 { + label = "Menu"; + linux,code = <KEY_MENU>; + channel = <0>; + voltage = <601151>; + }; - power { - gpios = <&pio 6 9 GPIO_ACTIVE_HIGH>; - default-state = "on"; - }; + button@795 { + label = "Enter"; + linux,code = <KEY_ENTER>; + channel = <0>; + voltage = <795090>; + }; + + button@987 { + label = "Home"; + linux,code = <KEY_HOMEPAGE>; + channel = <0>; + voltage = <987387>; + }; +}; + +&mmc0 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_olinuxino>; + vmmc-supply = <®_vcc3v3>; + bus-width = <4>; + cd-gpios = <&pio 6 0 GPIO_ACTIVE_HIGH>; /* PG0 */ + cd-inverted; + status = "okay"; +}; + +&ohci0 { + status = "okay"; +}; + +&pio { + mmc0_cd_pin_olinuxino: mmc0_cd_pin@0 { + allwinner,pins = "PG0"; + allwinner,function = "gpio_in"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; + }; + + led_pins_olinuxino: led_pins@0 { + allwinner,pins = "PG9"; + allwinner,function = "gpio_out"; + allwinner,drive = <SUN4I_PINCTRL_20_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; - reg_usb1_vbus: usb1-vbus { - pinctrl-0 = <&usb1_vbus_pin_olinuxino>; - gpio = <&pio 6 11 GPIO_ACTIVE_HIGH>; - status = "okay"; + usb1_vbus_pin_olinuxino: usb1_vbus_pin@0 { + allwinner,pins = "PG11"; + allwinner,function = "gpio_out"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; }; + +®_usb1_vbus { + pinctrl-0 = <&usb1_vbus_pin_olinuxino>; + gpio = <&pio 6 11 GPIO_ACTIVE_HIGH>; + status = "okay"; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&uart1_pins_b>; + status = "okay"; +}; + +&usbphy { + usb1_vbus-supply = <®_usb1_vbus>; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/sun5i-a13-utoo-p66.dts b/arch/arm/boot/dts/sun5i-a13-utoo-p66.dts new file mode 100644 index 000000000..514f159a1 --- /dev/null +++ b/arch/arm/boot/dts/sun5i-a13-utoo-p66.dts @@ -0,0 +1,226 @@ +/* + * Copyright 2015 Hans de Goede <hdegoede@redhat.com> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; +#include "sun5i-a13.dtsi" +#include "sunxi-common-regulators.dtsi" +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/pinctrl/sun4i-a10.h> + +/ { + model = "Utoo P66"; + compatible = "utoo,p66", "allwinner,sun5i-a13"; + + i2c_lcd: i2c@0 { + /* The lcd panel i2c interface is hooked up via gpios */ + compatible = "i2c-gpio"; + pinctrl-names = "default"; + pinctrl-0 = <&i2c_lcd_pins>; + gpios = <&pio 6 12 GPIO_ACTIVE_HIGH>, /* PG12, sda */ + <&pio 6 10 GPIO_ACTIVE_HIGH>; /* PG10, scl */ + i2c-gpio,delay-us = <5>; + }; +}; + +&cpu0 { + cpu-supply = <®_dcdc2>; +}; + +&ehci0 { + status = "okay"; +}; + +&i2c0 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins_a>; + status = "okay"; + + axp209: pmic@34 { + reg = <0x34>; + interrupts = <0>; + }; +}; + +#include "axp209.dtsi" + +&i2c1 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_pins_a>; + status = "okay"; + + icn8318: touchscreen@40 { + compatible = "chipone,icn8318"; + reg = <0x40>; + interrupt-parent = <&pio>; + interrupts = <9 IRQ_TYPE_EDGE_FALLING>; /* EINT9 (PG9) */ + pinctrl-names = "default"; + pinctrl-0 = <&ts_wake_pin_p66>; + wake-gpios = <&pio 1 3 GPIO_ACTIVE_HIGH>; /* PB3 */ + touchscreen-size-x = <800>; + touchscreen-size-y = <480>; + touchscreen-inverted-x; + touchscreen-swapped-x-y; + }; + + pcf8563: rtc@51 { + compatible = "nxp,pcf8563"; + reg = <0x51>; + }; +}; + +&lradc { + vref-supply = <®_ldo2>; + status = "okay"; + + button@200 { + label = "Volume Up"; + linux,code = <KEY_VOLUMEUP>; + channel = <0>; + voltage = <200000>; + }; + + button@400 { + label = "Volume Down"; + linux,code = <KEY_VOLUMEDOWN>; + channel = <0>; + voltage = <400000>; + }; +}; + +&mmc0 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_p66>; + vmmc-supply = <®_vcc3v3>; + bus-width = <4>; + cd-gpios = <&pio 6 0 GPIO_ACTIVE_HIGH>; /* PG0 */ + cd-inverted; + status = "okay"; +}; + +&mmc2 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc2_pins_a>; + vmmc-supply = <®_vcc3v3>; + bus-width = <8>; + non-removable; + status = "okay"; + + mmccard: mmccard@0 { + reg = <0>; + compatible = "mmc-card"; + broken-hpi; + }; +}; + +&pio { + mmc0_cd_pin_p66: mmc0_cd_pin@0 { + allwinner,pins = "PG0"; + allwinner,function = "gpio_in"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; + }; + + i2c_lcd_pins: i2c_lcd_pin@0 { + allwinner,pins = "PG10", "PG12"; + allwinner,function = "gpio_out"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; + }; + + ts_wake_pin_p66: ts_wake_pin@0 { + allwinner,pins = "PB3"; + allwinner,function = "gpio_out"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + }; + + usb0_vbus_pin_a: usb0_vbus_pin@0 { + allwinner,pins = "PB4"; + allwinner,function = "gpio_out"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + }; +}; + +®_dcdc2 { + regulator-always-on; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1500000>; + regulator-name = "vdd-cpu"; +}; + +®_dcdc3 { + regulator-always-on; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1400000>; + regulator-name = "vdd-int-pll"; +}; + +®_ldo1 { + regulator-name = "vdd-rtc"; +}; + +®_ldo2 { + regulator-always-on; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-name = "avcc"; +}; + +®_ldo3 { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc-wifi"; +}; + +®_usb0_vbus { + gpio = <&pio 1 4 GPIO_ACTIVE_HIGH>; /* PB4 */ + status = "okay"; +}; + +&usbphy { + usb0_vbus-supply = <®_usb0_vbus>; + usb1_vbus-supply = <®_ldo3>; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/sun5i-a13.dtsi b/arch/arm/boot/dts/sun5i-a13.dtsi index 5098185ab..976d4faa2 100644 --- a/arch/arm/boot/dts/sun5i-a13.dtsi +++ b/arch/arm/boot/dts/sun5i-a13.dtsi @@ -3,20 +3,51 @@ * * Maxime Ripard <maxime.ripard@free-electrons.com> * - * The code contained herein is licensed under the GNU General Public - * License. You may obtain a copy of the GNU General Public License - * Version 2 or later at the following locations: + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. * - * http://www.opensource.org/licenses/gpl-license.html - * http://www.gnu.org/copyleft/gpl.html + * a) This library is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This library is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. */ #include "skeleton.dtsi" -#include <dt-bindings/thermal/thermal.h> +#include "sun5i.dtsi" -#include <dt-bindings/dma/sun4i-a10.h> #include <dt-bindings/pinctrl/sun4i-a10.h> +#include <dt-bindings/thermal/thermal.h> / { interrupt-parent = <&intc>; @@ -35,31 +66,6 @@ }; }; - cpus { - #address-cells = <1>; - #size-cells = <0>; - - cpu0: cpu@0 { - device_type = "cpu"; - compatible = "arm,cortex-a8"; - reg = <0x0>; - clocks = <&cpu>; - clock-latency = <244144>; /* 8 32k periods */ - operating-points = < - /* kHz uV */ - 1008000 1400000 - 912000 1350000 - 864000 1300000 - 624000 1200000 - 576000 1200000 - 432000 1200000 - >; - #cooling-cells = <2>; - cooling-min-level = <0>; - cooling-max-level = <5>; - }; - }; - thermal-zones { cpu_thermal { /* milliseconds */ @@ -92,126 +98,22 @@ }; }; - memory { - reg = <0x40000000 0x20000000>; - }; - clocks { - #address-cells = <1>; - #size-cells = <1>; - ranges; - - /* - * This is a dummy clock, to be used as placeholder on - * other mux clocks when a specific parent clock is not - * yet implemented. It should be dropped when the driver - * is complete. - */ - dummy: dummy { - #clock-cells = <0>; - compatible = "fixed-clock"; - clock-frequency = <0>; - }; - - osc24M: clk@01c20050 { - #clock-cells = <0>; - compatible = "allwinner,sun4i-a10-osc-clk"; - reg = <0x01c20050 0x4>; - clock-frequency = <24000000>; - clock-output-names = "osc24M"; - }; - - osc32k: clk@0 { - #clock-cells = <0>; - compatible = "fixed-clock"; - clock-frequency = <32768>; - clock-output-names = "osc32k"; - }; - - pll1: clk@01c20000 { - #clock-cells = <0>; - compatible = "allwinner,sun4i-a10-pll1-clk"; - reg = <0x01c20000 0x4>; - clocks = <&osc24M>; - clock-output-names = "pll1"; - }; - - pll4: clk@01c20018 { - #clock-cells = <0>; - compatible = "allwinner,sun4i-a10-pll1-clk"; - reg = <0x01c20018 0x4>; - clocks = <&osc24M>; - clock-output-names = "pll4"; - }; - - pll5: clk@01c20020 { - #clock-cells = <1>; - compatible = "allwinner,sun4i-a10-pll5-clk"; - reg = <0x01c20020 0x4>; - clocks = <&osc24M>; - clock-output-names = "pll5_ddr", "pll5_other"; - }; - - pll6: clk@01c20028 { - #clock-cells = <1>; - compatible = "allwinner,sun4i-a10-pll6-clk"; - reg = <0x01c20028 0x4>; - clocks = <&osc24M>; - clock-output-names = "pll6_sata", "pll6_other", "pll6"; - }; - - /* dummy is 200M */ - cpu: cpu@01c20054 { - #clock-cells = <0>; - compatible = "allwinner,sun4i-a10-cpu-clk"; - reg = <0x01c20054 0x4>; - clocks = <&osc32k>, <&osc24M>, <&pll1>, <&dummy>; - clock-output-names = "cpu"; - }; - - axi: axi@01c20054 { - #clock-cells = <0>; - compatible = "allwinner,sun4i-a10-axi-clk"; - reg = <0x01c20054 0x4>; - clocks = <&cpu>; - clock-output-names = "axi"; - }; - - axi_gates: clk@01c2005c { - #clock-cells = <1>; - compatible = "allwinner,sun4i-a10-axi-gates-clk"; - reg = <0x01c2005c 0x4>; - clocks = <&axi>; - clock-output-names = "axi_dram"; - }; - - ahb: ahb@01c20054 { - #clock-cells = <0>; - compatible = "allwinner,sun4i-a10-ahb-clk"; - reg = <0x01c20054 0x4>; - clocks = <&axi>; - clock-output-names = "ahb"; - }; - ahb_gates: clk@01c20060 { #clock-cells = <1>; compatible = "allwinner,sun5i-a13-ahb-gates-clk"; reg = <0x01c20060 0x8>; clocks = <&ahb>; - clock-output-names = "ahb_usbotg", "ahb_ehci", "ahb_ohci", - "ahb_ss", "ahb_dma", "ahb_bist", "ahb_mmc0", - "ahb_mmc1", "ahb_mmc2", "ahb_nand", "ahb_sdram", - "ahb_spi0", "ahb_spi1", "ahb_spi2", "ahb_stimer", - "ahb_ve", "ahb_lcd", "ahb_csi", "ahb_de_be", - "ahb_de_fe", "ahb_iep", "ahb_mali400"; - }; - - apb0: apb0@01c20054 { - #clock-cells = <0>; - compatible = "allwinner,sun4i-a10-apb0-clk"; - reg = <0x01c20054 0x4>; - clocks = <&ahb>; - clock-output-names = "apb0"; + clock-output-names = "ahb_usbotg", "ahb_ehci", + "ahb_ohci", "ahb_ss", "ahb_dma", + "ahb_bist", "ahb_mmc0", "ahb_mmc1", + "ahb_mmc2", "ahb_nand", + "ahb_sdram", "ahb_spi0", + "ahb_spi1", "ahb_spi2", + "ahb_stimer", "ahb_ve", "ahb_lcd", + "ahb_csi", "ahb_de_be", + "ahb_de_fe", "ahb_iep", + "ahb_mali400"; }; apb0_gates: clk@01c20068 { @@ -219,15 +121,8 @@ compatible = "allwinner,sun5i-a13-apb0-gates-clk"; reg = <0x01c20068 0x4>; clocks = <&apb0>; - clock-output-names = "apb0_codec", "apb0_pio", "apb0_ir"; - }; - - apb1: clk@01c20058 { - #clock-cells = <0>; - compatible = "allwinner,sun4i-a10-apb1-clk"; - reg = <0x01c20058 0x4>; - clocks = <&osc24M>, <&pll6 1>, <&osc32k>; - clock-output-names = "apb1"; + clock-output-names = "apb0_codec", "apb0_pio", + "apb0_ir"; }; apb1_gates: clk@01c2006c { @@ -238,384 +133,39 @@ clock-output-names = "apb1_i2c0", "apb1_i2c1", "apb1_i2c2", "apb1_uart1", "apb1_uart3"; }; - - nand_clk: clk@01c20080 { - #clock-cells = <0>; - compatible = "allwinner,sun4i-a10-mod0-clk"; - reg = <0x01c20080 0x4>; - clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; - clock-output-names = "nand"; - }; - - ms_clk: clk@01c20084 { - #clock-cells = <0>; - compatible = "allwinner,sun4i-a10-mod0-clk"; - reg = <0x01c20084 0x4>; - clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; - clock-output-names = "ms"; - }; - - mmc0_clk: clk@01c20088 { - #clock-cells = <1>; - compatible = "allwinner,sun4i-a10-mmc-clk"; - reg = <0x01c20088 0x4>; - clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; - clock-output-names = "mmc0", - "mmc0_output", - "mmc0_sample"; - }; - - mmc1_clk: clk@01c2008c { - #clock-cells = <1>; - compatible = "allwinner,sun4i-a10-mmc-clk"; - reg = <0x01c2008c 0x4>; - clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; - clock-output-names = "mmc1", - "mmc1_output", - "mmc1_sample"; - }; - - mmc2_clk: clk@01c20090 { - #clock-cells = <1>; - compatible = "allwinner,sun4i-a10-mmc-clk"; - reg = <0x01c20090 0x4>; - clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; - clock-output-names = "mmc2", - "mmc2_output", - "mmc2_sample"; - }; - - ts_clk: clk@01c20098 { - #clock-cells = <0>; - compatible = "allwinner,sun4i-a10-mod0-clk"; - reg = <0x01c20098 0x4>; - clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; - clock-output-names = "ts"; - }; - - ss_clk: clk@01c2009c { - #clock-cells = <0>; - compatible = "allwinner,sun4i-a10-mod0-clk"; - reg = <0x01c2009c 0x4>; - clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; - clock-output-names = "ss"; - }; - - spi0_clk: clk@01c200a0 { - #clock-cells = <0>; - compatible = "allwinner,sun4i-a10-mod0-clk"; - reg = <0x01c200a0 0x4>; - clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; - clock-output-names = "spi0"; - }; - - spi1_clk: clk@01c200a4 { - #clock-cells = <0>; - compatible = "allwinner,sun4i-a10-mod0-clk"; - reg = <0x01c200a4 0x4>; - clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; - clock-output-names = "spi1"; - }; - - spi2_clk: clk@01c200a8 { - #clock-cells = <0>; - compatible = "allwinner,sun4i-a10-mod0-clk"; - reg = <0x01c200a8 0x4>; - clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; - clock-output-names = "spi2"; - }; - - ir0_clk: clk@01c200b0 { - #clock-cells = <0>; - compatible = "allwinner,sun4i-a10-mod0-clk"; - reg = <0x01c200b0 0x4>; - clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; - clock-output-names = "ir0"; - }; - - usb_clk: clk@01c200cc { - #clock-cells = <1>; - #reset-cells = <1>; - compatible = "allwinner,sun5i-a13-usb-clk"; - reg = <0x01c200cc 0x4>; - clocks = <&pll6 1>; - clock-output-names = "usb_ohci0", "usb_phy"; - }; - - mbus_clk: clk@01c2015c { - #clock-cells = <0>; - compatible = "allwinner,sun5i-a13-mbus-clk"; - reg = <0x01c2015c 0x4>; - clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; - clock-output-names = "mbus"; - }; }; +}; - soc@01c00000 { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <1>; - ranges; - - dma: dma-controller@01c02000 { - compatible = "allwinner,sun4i-a10-dma"; - reg = <0x01c02000 0x1000>; - interrupts = <27>; - clocks = <&ahb_gates 6>; - #dma-cells = <2>; - }; - - spi0: spi@01c05000 { - compatible = "allwinner,sun4i-a10-spi"; - reg = <0x01c05000 0x1000>; - interrupts = <10>; - clocks = <&ahb_gates 20>, <&spi0_clk>; - clock-names = "ahb", "mod"; - dmas = <&dma SUN4I_DMA_DEDICATED 27>, - <&dma SUN4I_DMA_DEDICATED 26>; - dma-names = "rx", "tx"; - status = "disabled"; - #address-cells = <1>; - #size-cells = <0>; - }; - - spi1: spi@01c06000 { - compatible = "allwinner,sun4i-a10-spi"; - reg = <0x01c06000 0x1000>; - interrupts = <11>; - clocks = <&ahb_gates 21>, <&spi1_clk>; - clock-names = "ahb", "mod"; - dmas = <&dma SUN4I_DMA_DEDICATED 9>, - <&dma SUN4I_DMA_DEDICATED 8>; - dma-names = "rx", "tx"; - status = "disabled"; - #address-cells = <1>; - #size-cells = <0>; - }; - - mmc0: mmc@01c0f000 { - compatible = "allwinner,sun5i-a13-mmc"; - reg = <0x01c0f000 0x1000>; - clocks = <&ahb_gates 8>, - <&mmc0_clk 0>, - <&mmc0_clk 1>, - <&mmc0_clk 2>; - clock-names = "ahb", - "mmc", - "output", - "sample"; - interrupts = <32>; - status = "disabled"; - }; - - mmc2: mmc@01c11000 { - compatible = "allwinner,sun5i-a13-mmc"; - reg = <0x01c11000 0x1000>; - clocks = <&ahb_gates 10>, - <&mmc2_clk 0>, - <&mmc2_clk 1>, - <&mmc2_clk 2>; - clock-names = "ahb", - "mmc", - "output", - "sample"; - interrupts = <34>; - status = "disabled"; - }; - - usbphy: phy@01c13400 { - #phy-cells = <1>; - compatible = "allwinner,sun5i-a13-usb-phy"; - reg = <0x01c13400 0x10 0x01c14800 0x4>; - reg-names = "phy_ctrl", "pmu1"; - clocks = <&usb_clk 8>; - clock-names = "usb_phy"; - resets = <&usb_clk 0>, <&usb_clk 1>; - reset-names = "usb0_reset", "usb1_reset"; - status = "disabled"; - }; - - ehci0: usb@01c14000 { - compatible = "allwinner,sun5i-a13-ehci", "generic-ehci"; - reg = <0x01c14000 0x100>; - interrupts = <39>; - clocks = <&ahb_gates 1>; - phys = <&usbphy 1>; - phy-names = "usb"; - status = "disabled"; - }; - - ohci0: usb@01c14400 { - compatible = "allwinner,sun5i-a13-ohci", "generic-ohci"; - reg = <0x01c14400 0x100>; - interrupts = <40>; - clocks = <&usb_clk 6>, <&ahb_gates 2>; - phys = <&usbphy 1>; - phy-names = "usb"; - status = "disabled"; - }; - - spi2: spi@01c17000 { - compatible = "allwinner,sun4i-a10-spi"; - reg = <0x01c17000 0x1000>; - interrupts = <12>; - clocks = <&ahb_gates 22>, <&spi2_clk>; - clock-names = "ahb", "mod"; - dmas = <&dma SUN4I_DMA_DEDICATED 29>, - <&dma SUN4I_DMA_DEDICATED 28>; - dma-names = "rx", "tx"; - status = "disabled"; - #address-cells = <1>; - #size-cells = <0>; - }; - - intc: interrupt-controller@01c20400 { - compatible = "allwinner,sun4i-a10-ic"; - reg = <0x01c20400 0x400>; - interrupt-controller; - #interrupt-cells = <1>; - }; - - pio: pinctrl@01c20800 { - compatible = "allwinner,sun5i-a13-pinctrl"; - reg = <0x01c20800 0x400>; - interrupts = <28>; - clocks = <&apb0_gates 5>; - gpio-controller; - interrupt-controller; - #interrupt-cells = <2>; - #size-cells = <0>; - #gpio-cells = <3>; - - uart1_pins_a: uart1@0 { - allwinner,pins = "PE10", "PE11"; - allwinner,function = "uart1"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; - }; - - uart1_pins_b: uart1@1 { - allwinner,pins = "PG3", "PG4"; - allwinner,function = "uart1"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; - }; - - i2c0_pins_a: i2c0@0 { - allwinner,pins = "PB0", "PB1"; - allwinner,function = "i2c0"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; - }; - - i2c1_pins_a: i2c1@0 { - allwinner,pins = "PB15", "PB16"; - allwinner,function = "i2c1"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; - }; - - i2c2_pins_a: i2c2@0 { - allwinner,pins = "PB17", "PB18"; - allwinner,function = "i2c2"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; - }; - - mmc0_pins_a: mmc0@0 { - allwinner,pins = "PF0","PF1","PF2","PF3","PF4","PF5"; - allwinner,function = "mmc0"; - allwinner,drive = <SUN4I_PINCTRL_30_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; - }; - }; - - timer@01c20c00 { - compatible = "allwinner,sun4i-a10-timer"; - reg = <0x01c20c00 0x90>; - interrupts = <22>; - clocks = <&osc24M>; - }; - - wdt: watchdog@01c20c90 { - compatible = "allwinner,sun4i-a10-wdt"; - reg = <0x01c20c90 0x10>; - }; - - lradc: lradc@01c22800 { - compatible = "allwinner,sun4i-a10-lradc-keys"; - reg = <0x01c22800 0x100>; - interrupts = <31>; - status = "disabled"; - }; - - sid: eeprom@01c23800 { - compatible = "allwinner,sun4i-a10-sid"; - reg = <0x01c23800 0x10>; - }; - - rtp: rtp@01c25000 { - compatible = "allwinner,sun5i-a13-ts"; - reg = <0x01c25000 0x100>; - interrupts = <29>; - #thermal-sensor-cells = <0>; - }; - - uart1: serial@01c28400 { - compatible = "snps,dw-apb-uart"; - reg = <0x01c28400 0x400>; - interrupts = <2>; - reg-shift = <2>; - reg-io-width = <4>; - clocks = <&apb1_gates 17>; - status = "disabled"; - }; - - uart3: serial@01c28c00 { - compatible = "snps,dw-apb-uart"; - reg = <0x01c28c00 0x400>; - interrupts = <4>; - reg-shift = <2>; - reg-io-width = <4>; - clocks = <&apb1_gates 19>; - status = "disabled"; - }; - - i2c0: i2c@01c2ac00 { - compatible = "allwinner,sun5i-a13-i2c", "allwinner,sun4i-a10-i2c"; - reg = <0x01c2ac00 0x400>; - interrupts = <7>; - clocks = <&apb1_gates 0>; - status = "disabled"; - #address-cells = <1>; - #size-cells = <0>; - }; +&cpu0 { + clock-latency = <244144>; /* 8 32k periods */ + operating-points = < + /* kHz uV */ + 1008000 1400000 + 912000 1350000 + 864000 1300000 + 624000 1200000 + 576000 1200000 + 432000 1200000 + >; + #cooling-cells = <2>; + cooling-min-level = <0>; + cooling-max-level = <5>; +}; - i2c1: i2c@01c2b000 { - compatible = "allwinner,sun5i-a13-i2c", "allwinner,sun4i-a10-i2c"; - reg = <0x01c2b000 0x400>; - interrupts = <8>; - clocks = <&apb1_gates 1>; - status = "disabled"; - #address-cells = <1>; - #size-cells = <0>; - }; +&pio { + compatible = "allwinner,sun5i-a13-pinctrl"; - i2c2: i2c@01c2b400 { - compatible = "allwinner,sun5i-a13-i2c", "allwinner,sun4i-a10-i2c"; - reg = <0x01c2b400 0x400>; - interrupts = <9>; - clocks = <&apb1_gates 2>; - status = "disabled"; - #address-cells = <1>; - #size-cells = <0>; - }; + uart1_pins_a: uart1@0 { + allwinner,pins = "PE10", "PE11"; + allwinner,function = "uart1"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + }; - timer@01c60000 { - compatible = "allwinner,sun5i-a13-hstimer"; - reg = <0x01c60000 0x1000>; - interrupts = <82>, <83>; - clocks = <&ahb_gates 28>; - }; + uart1_pins_b: uart1@1 { + allwinner,pins = "PG3", "PG4"; + allwinner,function = "uart1"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; }; diff --git a/arch/arm/boot/dts/sun5i.dtsi b/arch/arm/boot/dts/sun5i.dtsi new file mode 100644 index 000000000..54b097830 --- /dev/null +++ b/arch/arm/boot/dts/sun5i.dtsi @@ -0,0 +1,609 @@ +/* + * Copyright 2012-2015 Maxime Ripard + * + * Maxime Ripard <maxime.ripard@free-electrons.com> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This library is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This library is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +#include "skeleton.dtsi" + +#include <dt-bindings/dma/sun4i-a10.h> +#include <dt-bindings/pinctrl/sun4i-a10.h> + +/ { + interrupt-parent = <&intc>; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu0: cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a8"; + reg = <0x0>; + clocks = <&cpu>; + }; + }; + + clocks { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + /* + * This is a dummy clock, to be used as placeholder on + * other mux clocks when a specific parent clock is not + * yet implemented. It should be dropped when the driver + * is complete. + */ + dummy: dummy { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <0>; + }; + + osc24M: clk@01c20050 { + #clock-cells = <0>; + compatible = "allwinner,sun4i-a10-osc-clk"; + reg = <0x01c20050 0x4>; + clock-frequency = <24000000>; + clock-output-names = "osc24M"; + }; + + osc32k: clk@0 { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <32768>; + clock-output-names = "osc32k"; + }; + + pll1: clk@01c20000 { + #clock-cells = <0>; + compatible = "allwinner,sun4i-a10-pll1-clk"; + reg = <0x01c20000 0x4>; + clocks = <&osc24M>; + clock-output-names = "pll1"; + }; + + pll4: clk@01c20018 { + #clock-cells = <0>; + compatible = "allwinner,sun4i-a10-pll1-clk"; + reg = <0x01c20018 0x4>; + clocks = <&osc24M>; + clock-output-names = "pll4"; + }; + + pll5: clk@01c20020 { + #clock-cells = <1>; + compatible = "allwinner,sun4i-a10-pll5-clk"; + reg = <0x01c20020 0x4>; + clocks = <&osc24M>; + clock-output-names = "pll5_ddr", "pll5_other"; + }; + + pll6: clk@01c20028 { + #clock-cells = <1>; + compatible = "allwinner,sun4i-a10-pll6-clk"; + reg = <0x01c20028 0x4>; + clocks = <&osc24M>; + clock-output-names = "pll6_sata", "pll6_other", "pll6"; + }; + + /* dummy is 200M */ + cpu: cpu@01c20054 { + #clock-cells = <0>; + compatible = "allwinner,sun4i-a10-cpu-clk"; + reg = <0x01c20054 0x4>; + clocks = <&osc32k>, <&osc24M>, <&pll1>, <&dummy>; + clock-output-names = "cpu"; + }; + + axi: axi@01c20054 { + #clock-cells = <0>; + compatible = "allwinner,sun4i-a10-axi-clk"; + reg = <0x01c20054 0x4>; + clocks = <&cpu>; + clock-output-names = "axi"; + }; + + ahb: ahb@01c20054 { + #clock-cells = <0>; + compatible = "allwinner,sun5i-a13-ahb-clk"; + reg = <0x01c20054 0x4>; + clocks = <&axi>, <&cpu>, <&pll6 1>; + clock-output-names = "ahb"; + /* + * Use PLL6 as parent, instead of CPU/AXI + * which has rate changes due to cpufreq + */ + assigned-clocks = <&ahb>; + assigned-clock-parents = <&pll6 1>; + }; + + apb0: apb0@01c20054 { + #clock-cells = <0>; + compatible = "allwinner,sun4i-a10-apb0-clk"; + reg = <0x01c20054 0x4>; + clocks = <&ahb>; + clock-output-names = "apb0"; + }; + + apb1: clk@01c20058 { + #clock-cells = <0>; + compatible = "allwinner,sun4i-a10-apb1-clk"; + reg = <0x01c20058 0x4>; + clocks = <&osc24M>, <&pll6 1>, <&osc32k>; + clock-output-names = "apb1"; + }; + + axi_gates: clk@01c2005c { + #clock-cells = <1>; + compatible = "allwinner,sun4i-a10-axi-gates-clk"; + reg = <0x01c2005c 0x4>; + clocks = <&axi>; + clock-output-names = "axi_dram"; + }; + + nand_clk: clk@01c20080 { + #clock-cells = <0>; + compatible = "allwinner,sun4i-a10-mod0-clk"; + reg = <0x01c20080 0x4>; + clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; + clock-output-names = "nand"; + }; + + ms_clk: clk@01c20084 { + #clock-cells = <0>; + compatible = "allwinner,sun4i-a10-mod0-clk"; + reg = <0x01c20084 0x4>; + clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; + clock-output-names = "ms"; + }; + + mmc0_clk: clk@01c20088 { + #clock-cells = <1>; + compatible = "allwinner,sun4i-a10-mmc-clk"; + reg = <0x01c20088 0x4>; + clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; + clock-output-names = "mmc0", + "mmc0_output", + "mmc0_sample"; + }; + + mmc1_clk: clk@01c2008c { + #clock-cells = <1>; + compatible = "allwinner,sun4i-a10-mmc-clk"; + reg = <0x01c2008c 0x4>; + clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; + clock-output-names = "mmc1", + "mmc1_output", + "mmc1_sample"; + }; + + mmc2_clk: clk@01c20090 { + #clock-cells = <1>; + compatible = "allwinner,sun4i-a10-mmc-clk"; + reg = <0x01c20090 0x4>; + clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; + clock-output-names = "mmc2", + "mmc2_output", + "mmc2_sample"; + }; + + ts_clk: clk@01c20098 { + #clock-cells = <0>; + compatible = "allwinner,sun4i-a10-mod0-clk"; + reg = <0x01c20098 0x4>; + clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; + clock-output-names = "ts"; + }; + + ss_clk: clk@01c2009c { + #clock-cells = <0>; + compatible = "allwinner,sun4i-a10-mod0-clk"; + reg = <0x01c2009c 0x4>; + clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; + clock-output-names = "ss"; + }; + + spi0_clk: clk@01c200a0 { + #clock-cells = <0>; + compatible = "allwinner,sun4i-a10-mod0-clk"; + reg = <0x01c200a0 0x4>; + clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; + clock-output-names = "spi0"; + }; + + spi1_clk: clk@01c200a4 { + #clock-cells = <0>; + compatible = "allwinner,sun4i-a10-mod0-clk"; + reg = <0x01c200a4 0x4>; + clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; + clock-output-names = "spi1"; + }; + + spi2_clk: clk@01c200a8 { + #clock-cells = <0>; + compatible = "allwinner,sun4i-a10-mod0-clk"; + reg = <0x01c200a8 0x4>; + clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; + clock-output-names = "spi2"; + }; + + ir0_clk: clk@01c200b0 { + #clock-cells = <0>; + compatible = "allwinner,sun4i-a10-mod0-clk"; + reg = <0x01c200b0 0x4>; + clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; + clock-output-names = "ir0"; + }; + + usb_clk: clk@01c200cc { + #clock-cells = <1>; + #reset-cells = <1>; + compatible = "allwinner,sun5i-a13-usb-clk"; + reg = <0x01c200cc 0x4>; + clocks = <&pll6 1>; + clock-output-names = "usb_ohci0", "usb_phy"; + }; + + mbus_clk: clk@01c2015c { + #clock-cells = <0>; + compatible = "allwinner,sun5i-a13-mbus-clk"; + reg = <0x01c2015c 0x4>; + clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; + clock-output-names = "mbus"; + }; + }; + + soc@01c00000 { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + sram-controller@01c00000 { + compatible = "allwinner,sun4i-a10-sram-controller"; + reg = <0x01c00000 0x30>; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + sram_a: sram@00000000 { + compatible = "mmio-sram"; + reg = <0x00000000 0xc000>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x00000000 0xc000>; + }; + + sram_d: sram@00010000 { + compatible = "mmio-sram"; + reg = <0x00010000 0x1000>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x00010000 0x1000>; + + otg_sram: sram-section@0000 { + compatible = "allwinner,sun4i-a10-sram-d"; + reg = <0x0000 0x1000>; + status = "disabled"; + }; + }; + }; + + dma: dma-controller@01c02000 { + compatible = "allwinner,sun4i-a10-dma"; + reg = <0x01c02000 0x1000>; + interrupts = <27>; + clocks = <&ahb_gates 6>; + #dma-cells = <2>; + }; + + spi0: spi@01c05000 { + compatible = "allwinner,sun4i-a10-spi"; + reg = <0x01c05000 0x1000>; + interrupts = <10>; + clocks = <&ahb_gates 20>, <&spi0_clk>; + clock-names = "ahb", "mod"; + dmas = <&dma SUN4I_DMA_DEDICATED 27>, + <&dma SUN4I_DMA_DEDICATED 26>; + dma-names = "rx", "tx"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; + }; + + spi1: spi@01c06000 { + compatible = "allwinner,sun4i-a10-spi"; + reg = <0x01c06000 0x1000>; + interrupts = <11>; + clocks = <&ahb_gates 21>, <&spi1_clk>; + clock-names = "ahb", "mod"; + dmas = <&dma SUN4I_DMA_DEDICATED 9>, + <&dma SUN4I_DMA_DEDICATED 8>; + dma-names = "rx", "tx"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; + }; + + mmc0: mmc@01c0f000 { + compatible = "allwinner,sun5i-a13-mmc"; + reg = <0x01c0f000 0x1000>; + clocks = <&ahb_gates 8>, + <&mmc0_clk 0>, + <&mmc0_clk 1>, + <&mmc0_clk 2>; + clock-names = "ahb", + "mmc", + "output", + "sample"; + interrupts = <32>; + status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; + }; + + mmc1: mmc@01c10000 { + compatible = "allwinner,sun5i-a13-mmc"; + reg = <0x01c10000 0x1000>; + clocks = <&ahb_gates 9>, + <&mmc1_clk 0>, + <&mmc1_clk 1>, + <&mmc1_clk 2>; + clock-names = "ahb", + "mmc", + "output", + "sample"; + interrupts = <33>; + status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; + }; + + mmc2: mmc@01c11000 { + compatible = "allwinner,sun5i-a13-mmc"; + reg = <0x01c11000 0x1000>; + clocks = <&ahb_gates 10>, + <&mmc2_clk 0>, + <&mmc2_clk 1>, + <&mmc2_clk 2>; + clock-names = "ahb", + "mmc", + "output", + "sample"; + interrupts = <34>; + status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; + }; + + usbphy: phy@01c13400 { + #phy-cells = <1>; + compatible = "allwinner,sun5i-a13-usb-phy"; + reg = <0x01c13400 0x10 0x01c14800 0x4>; + reg-names = "phy_ctrl", "pmu1"; + clocks = <&usb_clk 8>; + clock-names = "usb_phy"; + resets = <&usb_clk 0>, <&usb_clk 1>; + reset-names = "usb0_reset", "usb1_reset"; + status = "disabled"; + }; + + ehci0: usb@01c14000 { + compatible = "allwinner,sun5i-a13-ehci", "generic-ehci"; + reg = <0x01c14000 0x100>; + interrupts = <39>; + clocks = <&ahb_gates 1>; + phys = <&usbphy 1>; + phy-names = "usb"; + status = "disabled"; + }; + + ohci0: usb@01c14400 { + compatible = "allwinner,sun5i-a13-ohci", "generic-ohci"; + reg = <0x01c14400 0x100>; + interrupts = <40>; + clocks = <&usb_clk 6>, <&ahb_gates 2>; + phys = <&usbphy 1>; + phy-names = "usb"; + status = "disabled"; + }; + + spi2: spi@01c17000 { + compatible = "allwinner,sun4i-a10-spi"; + reg = <0x01c17000 0x1000>; + interrupts = <12>; + clocks = <&ahb_gates 22>, <&spi2_clk>; + clock-names = "ahb", "mod"; + dmas = <&dma SUN4I_DMA_DEDICATED 29>, + <&dma SUN4I_DMA_DEDICATED 28>; + dma-names = "rx", "tx"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; + }; + + intc: interrupt-controller@01c20400 { + compatible = "allwinner,sun4i-a10-ic"; + reg = <0x01c20400 0x400>; + interrupt-controller; + #interrupt-cells = <1>; + }; + + pio: pinctrl@01c20800 { + reg = <0x01c20800 0x400>; + interrupts = <28>; + clocks = <&apb0_gates 5>; + gpio-controller; + interrupt-controller; + #interrupt-cells = <2>; + #size-cells = <0>; + #gpio-cells = <3>; + + i2c0_pins_a: i2c0@0 { + allwinner,pins = "PB0", "PB1"; + allwinner,function = "i2c0"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + }; + + i2c1_pins_a: i2c1@0 { + allwinner,pins = "PB15", "PB16"; + allwinner,function = "i2c1"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + }; + + i2c2_pins_a: i2c2@0 { + allwinner,pins = "PB17", "PB18"; + allwinner,function = "i2c2"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + }; + + mmc0_pins_a: mmc0@0 { + allwinner,pins = "PF0", "PF1", "PF2", "PF3", + "PF4", "PF5"; + allwinner,function = "mmc0"; + allwinner,drive = <SUN4I_PINCTRL_30_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + }; + + mmc2_pins_a: mmc2@0 { + allwinner,pins = "PC6", "PC7", "PC8", "PC9", + "PC10", "PC11", "PC12", "PC13", + "PC14", "PC15"; + allwinner,function = "mmc2"; + allwinner,drive = <SUN4I_PINCTRL_30_MA>; + allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; + }; + }; + + timer@01c20c00 { + compatible = "allwinner,sun4i-a10-timer"; + reg = <0x01c20c00 0x90>; + interrupts = <22>; + clocks = <&osc24M>; + }; + + wdt: watchdog@01c20c90 { + compatible = "allwinner,sun4i-a10-wdt"; + reg = <0x01c20c90 0x10>; + }; + + lradc: lradc@01c22800 { + compatible = "allwinner,sun4i-a10-lradc-keys"; + reg = <0x01c22800 0x100>; + interrupts = <31>; + status = "disabled"; + }; + + sid: eeprom@01c23800 { + compatible = "allwinner,sun4i-a10-sid"; + reg = <0x01c23800 0x10>; + }; + + rtp: rtp@01c25000 { + compatible = "allwinner,sun5i-a13-ts"; + reg = <0x01c25000 0x100>; + interrupts = <29>; + #thermal-sensor-cells = <0>; + }; + + uart1: serial@01c28400 { + compatible = "snps,dw-apb-uart"; + reg = <0x01c28400 0x400>; + interrupts = <2>; + reg-shift = <2>; + reg-io-width = <4>; + clocks = <&apb1_gates 17>; + status = "disabled"; + }; + + uart3: serial@01c28c00 { + compatible = "snps,dw-apb-uart"; + reg = <0x01c28c00 0x400>; + interrupts = <4>; + reg-shift = <2>; + reg-io-width = <4>; + clocks = <&apb1_gates 19>; + status = "disabled"; + }; + + i2c0: i2c@01c2ac00 { + compatible = "allwinner,sun4i-a10-i2c"; + reg = <0x01c2ac00 0x400>; + interrupts = <7>; + clocks = <&apb1_gates 0>; + status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; + }; + + i2c1: i2c@01c2b000 { + compatible = "allwinner,sun4i-a10-i2c"; + reg = <0x01c2b000 0x400>; + interrupts = <8>; + clocks = <&apb1_gates 1>; + status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; + }; + + i2c2: i2c@01c2b400 { + compatible = "allwinner,sun4i-a10-i2c"; + reg = <0x01c2b400 0x400>; + interrupts = <9>; + clocks = <&apb1_gates 2>; + status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; + }; + + timer@01c60000 { + compatible = "allwinner,sun5i-a13-hstimer"; + reg = <0x01c60000 0x1000>; + interrupts = <82>, <83>; + clocks = <&ahb_gates 28>; + }; + }; +}; diff --git a/arch/arm/boot/dts/sun6i-a31-app4-evb1.dts b/arch/arm/boot/dts/sun6i-a31-app4-evb1.dts index be9f5ee6b..2f8cfab77 100644 --- a/arch/arm/boot/dts/sun6i-a31-app4-evb1.dts +++ b/arch/arm/boot/dts/sun6i-a31-app4-evb1.dts @@ -18,11 +18,6 @@ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * You should have received a copy of the GNU General Public - * License along with this file; if not, write to the Free - * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, - * MA 02110-1301 USA - * * Or, alternatively, * * b) Permission is hereby granted, free of charge, to any person @@ -58,39 +53,41 @@ model = "Allwinner A31 APP4 EVB1 Evaluation Board"; compatible = "allwinner,app4-evb1", "allwinner,sun6i-a31"; + aliases { + serial0 = &uart0; + }; + chosen { - bootargs = "earlyprintk console=ttyS0,115200"; + stdout-path = "serial0:115200n8"; }; +}; - soc@01c00000 { - pio: pinctrl@01c20800 { - usb1_vbus_pin_a: usb1_vbus_pin@0 { - allwinner,pins = "PH27"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; - }; - }; +&ehci0 { + status = "okay"; +}; - usbphy: phy@01c19400 { - usb1_vbus-supply = <®_usb1_vbus>; - status = "okay"; - }; +&pio { + usb1_vbus_pin_a: usb1_vbus_pin@0 { + allwinner,pins = "PH27"; + allwinner,function = "gpio_out"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + }; +}; - ehci0: usb@01c1a000 { - status = "okay"; - }; +®_usb1_vbus { + pinctrl-0 = <&usb1_vbus_pin_a>; + gpio = <&pio 7 27 GPIO_ACTIVE_HIGH>; + status = "okay"; +}; - uart0: serial@01c28000 { - pinctrl-names = "default"; - pinctrl-0 = <&uart0_pins_a>; - status = "okay"; - }; - }; +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pins_a>; + status = "okay"; +}; - reg_usb1_vbus: usb1-vbus { - pinctrl-0 = <&usb1_vbus_pin_a>; - gpio = <&pio 7 27 GPIO_ACTIVE_HIGH>; - status = "okay"; - }; +&usbphy { + usb1_vbus-supply = <®_usb1_vbus>; + status = "okay"; }; diff --git a/arch/arm/boot/dts/sun6i-a31-colombus.dts b/arch/arm/boot/dts/sun6i-a31-colombus.dts index 84630e56a..0cf9926d1 100644 --- a/arch/arm/boot/dts/sun6i-a31-colombus.dts +++ b/arch/arm/boot/dts/sun6i-a31-colombus.dts @@ -18,11 +18,6 @@ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * You should have received a copy of the GNU General Public - * License along with this file; if not, write to the Free - * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, - * MA 02110-1301 USA - * * Or, alternatively, * * b) Permission is hereby granted, free of charge, to any person @@ -58,79 +53,81 @@ model = "WITS A31 Colombus Evaluation Board"; compatible = "wits,colombus", "allwinner,sun6i-a31"; + aliases { + serial0 = &uart0; + }; + chosen { - bootargs = "earlyprintk console=ttyS0,115200"; + stdout-path = "serial0:115200n8"; }; +}; + +&ehci1 { + status = "okay"; +}; + +&i2c0 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins_a>; + status = "fail"; +}; + +&i2c1 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_pins_a>; + status = "okay"; +}; + +&i2c2 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c2_pins_a>; + status = "okay"; +}; + +&mmc0 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_colombus>; + vmmc-supply = <®_vcc3v0>; + bus-width = <4>; + cd-gpios = <&pio 0 8 GPIO_ACTIVE_HIGH>; /* PA8 */ + cd-inverted; + status = "okay"; +}; - soc@01c00000 { - mmc0: mmc@01c0f000 { - pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_colombus>; - vmmc-supply = <®_vcc3v0>; - bus-width = <4>; - cd-gpios = <&pio 0 8 GPIO_ACTIVE_HIGH>; /* PA8 */ - cd-inverted; - status = "okay"; - }; - - usbphy: phy@01c19400 { - usb2_vbus-supply = <®_usb2_vbus>; - status = "okay"; - }; - - ehci1: usb@01c1b000 { - status = "okay"; - }; - - pio: pinctrl@01c20800 { - mmc0_pins_a: mmc0@0 { - allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; - }; - - mmc0_cd_pin_colombus: mmc0_cd_pin@0 { - allwinner,pins = "PA8"; - allwinner,function = "gpio_in"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; - }; - - usb2_vbus_pin_colombus: usb2_vbus_pin@0 { - allwinner,pins = "PH24"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; - }; - }; - - uart0: serial@01c28000 { - pinctrl-names = "default"; - pinctrl-0 = <&uart0_pins_a>; - status = "okay"; - }; - - i2c0: i2c@01c2ac00 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c0_pins_a>; - status = "fail"; - }; - - i2c1: i2c@01c2b000 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c1_pins_a>; - status = "okay"; - }; - - i2c2: i2c@01c2b400 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c2_pins_a>; - status = "okay"; - }; +&mmc0_pins_a { + allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; +}; + +&pio { + mmc0_cd_pin_colombus: mmc0_cd_pin@0 { + allwinner,pins = "PA8"; + allwinner,function = "gpio_in"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; }; - reg_usb2_vbus: usb2-vbus { - pinctrl-names = "default"; - pinctrl-0 = <&usb2_vbus_pin_colombus>; - gpio = <&pio 7 24 GPIO_ACTIVE_HIGH>; - status = "okay"; + usb2_vbus_pin_colombus: usb2_vbus_pin@0 { + allwinner,pins = "PH24"; + allwinner,function = "gpio_out"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; }; + +®_usb2_vbus { + pinctrl-names = "default"; + pinctrl-0 = <&usb2_vbus_pin_colombus>; + gpio = <&pio 7 24 GPIO_ACTIVE_HIGH>; + status = "okay"; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pins_a>; + status = "okay"; +}; + +&usbphy { + usb2_vbus-supply = <®_usb2_vbus>; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/sun6i-a31-hummingbird.dts b/arch/arm/boot/dts/sun6i-a31-hummingbird.dts index 8b61b1b34..d0cfadac0 100644 --- a/arch/arm/boot/dts/sun6i-a31-hummingbird.dts +++ b/arch/arm/boot/dts/sun6i-a31-hummingbird.dts @@ -18,11 +18,6 @@ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * You should have received a copy of the GNU General Public - * License along with this file; if not, write to the Free - * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, - * MA 02110-1301 USA - * * Or, alternatively, * * b) Permission is hereby granted, free of charge, to any person @@ -58,8 +53,17 @@ model = "Merrii A31 Hummingbird"; compatible = "merrii,a31-hummingbird", "allwinner,sun6i-a31"; + aliases { + serial0 = &uart0; + }; + chosen { - bootargs = "earlyprintk console=ttyS0,115200"; + stdout-path = "serial0:115200n8"; + }; + + wifi_pwrseq: wifi_pwrseq { + compatible = "mmc-pwrseq-simple"; + reset-gpios = <&pio 6 10 GPIO_ACTIVE_LOW>; /* PG10 */ }; }; @@ -106,10 +110,16 @@ }; }; +&ir { + pinctrl-names = "default"; + pinctrl-0 = <&ir_pins_a>; + status = "okay"; +}; + &mmc0 { pinctrl-names = "default"; pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_hummingbird>; - vmmc-supply = <®_vcc3v0>; + vmmc-supply = <&vcc_3v0>; bus-width = <4>; cd-gpios = <&pio 0 8 GPIO_ACTIVE_HIGH>; /* PA8 */ cd-inverted; @@ -121,6 +131,16 @@ allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; }; +&mmc1 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc1_pins_a>, <&wifi_reset_pin_hummingbird>; + vmmc-supply = <&vcc_wifi>; + mmc-pwrseq = <&wifi_pwrseq>; + bus-width = <4>; + non-removable; + status = "okay"; +}; + &ohci0 { status = "okay"; }; @@ -132,6 +152,80 @@ allwinner,drive = <SUN4I_PINCTRL_10_MA>; allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; }; + + wifi_reset_pin_hummingbird: wifi_reset_pin@0 { + allwinner,pins = "PG10"; + allwinner,function = "gpio_out"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + }; +}; + +&p2wi { + status = "okay"; + + axp221: pmic@68 { + compatible = "x-powers,axp221"; + reg = <0x68>; + interrupt-parent = <&nmi_intc>; + interrupts = <0 IRQ_TYPE_LEVEL_LOW>; + interrupt-controller; + #interrupt-cells = <1>; + dcdc1-supply = <&vcc_3v0>; + dcdc5-supply = <&vcc_dram>; + + regulators { + x-powers,dcdc-freq = <3000>; + + vcc_3v0: dcdc1 { + regulator-always-on; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-name = "vcc-3v0"; + }; + + vdd_cpu: dcdc2 { + regulator-always-on; + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <1320000>; + regulator-name = "vdd-cpu"; + }; + + vdd_gpu: dcdc3 { + regulator-always-on; + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <1320000>; + regulator-name = "vdd-gpu"; + }; + + vdd_sys_dll: dcdc4 { + regulator-always-on; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + regulator-name = "vdd-sys-dll"; + }; + + vcc_dram: dcdc5 { + regulator-always-on; + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <1500000>; + regulator-name = "vcc-dram"; + }; + + vcc_wifi: aldo1 { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc_wifi"; + }; + + avcc: aldo3 { + regulator-always-on; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-name = "avcc"; + }; + }; + }; }; ®_usb1_vbus { diff --git a/arch/arm/boot/dts/sun6i-a31-i7.dts b/arch/arm/boot/dts/sun6i-a31-i7.dts new file mode 100644 index 000000000..e9185dad6 --- /dev/null +++ b/arch/arm/boot/dts/sun6i-a31-i7.dts @@ -0,0 +1,149 @@ +/* + * Copyright 2015 Marcus Cooper <codekipper@gmail.com> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; +#include "sun6i-a31.dtsi" +#include "sunxi-common-regulators.dtsi" + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/pinctrl/sun4i-a10.h> + +/ { + model = "Mele I7 Quad top set box"; + compatible = "mele,i7", "allwinner,sun6i-a31"; + + aliases { + serial0 = &uart0; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&led_pins_i7>; + + blue { + label = "i7:blue:usr"; + gpios = <&pio 7 13 GPIO_ACTIVE_HIGH>; + }; + }; +}; + +&ehci0 { + status = "okay"; +}; + +&ehci1 { + status = "okay"; +}; + +&gmac { + pinctrl-names = "default"; + pinctrl-0 = <&gmac_pins_mii_a>; + phy = <&phy1>; + phy-mode = "mii"; + status = "okay"; + + phy1: ethernet-phy@1 { + reg = <1>; + }; +}; + +&ir { + pinctrl-names = "default"; + pinctrl-0 = <&ir_pins_a>; + status = "okay"; +}; + +&mmc0 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_i7>; + vmmc-supply = <®_vcc3v3>; + bus-width = <4>; + cd-gpios = <&pio 7 22 GPIO_ACTIVE_HIGH>; /* PH22 */ + cd-inverted; + status = "okay"; +}; + +&pio { + led_pins_i7: led_pins@0 { + allwinner,pins = "PH13"; + allwinner,function = "gpio_out"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + }; + + mmc0_cd_pin_i7: mmc0_cd_pin@0 { + allwinner,pins = "PH22"; + allwinner,function = "gpio_in"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; + }; + + usb1_vbus_pin_i7: usb1_vbus_pin@0 { + allwinner,pins = "PC27"; + allwinner,function = "gpio_out"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + }; +}; + +®_usb1_vbus { + pinctrl-names = "default"; + pinctrl-0 = <&usb1_vbus_pin_i7>; + gpio = <&pio 2 27 GPIO_ACTIVE_HIGH>; + status = "okay"; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pins_a>; + status = "okay"; +}; + +&usbphy { + usb1_vbus-supply = <®_usb1_vbus>; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/sun6i-a31-m9.dts b/arch/arm/boot/dts/sun6i-a31-m9.dts index 139a21e6b..6e0e5687a 100644 --- a/arch/arm/boot/dts/sun6i-a31-m9.dts +++ b/arch/arm/boot/dts/sun6i-a31-m9.dts @@ -16,11 +16,6 @@ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * You should have received a copy of the GNU General Public - * License along with this file; if not, write to the Free - * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, - * MA 02110-1301 USA - * * Or, alternatively, * * b) Permission is hereby granted, free of charge, to any person @@ -53,100 +48,102 @@ #include <dt-bindings/pinctrl/sun4i-a10.h> / { - model = "Mele M9 / A1000G Quad top set box"; + model = "Mele M9 top set box"; compatible = "mele,m9", "allwinner,sun6i-a31"; + aliases { + serial0 = &uart0; + }; + chosen { - bootargs = "earlyprintk console=ttyS0,115200"; + stdout-path = "serial0:115200n8"; }; - soc@01c00000 { - mmc0: mmc@01c0f000 { - pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_m9>; - vmmc-supply = <®_vcc3v3>; - bus-width = <4>; - cd-gpios = <&pio 7 22 GPIO_ACTIVE_HIGH>; /* PH22 */ - cd-inverted; - status = "okay"; - }; + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&led_pins_m9>; - usbphy: phy@01c19400 { - usb1_vbus-supply = <®_usb1_vbus>; - status = "okay"; + blue { + label = "m9:blue:usr"; + gpios = <&pio 7 13 GPIO_ACTIVE_HIGH>; }; + }; +}; - ehci0: usb@01c1a000 { - status = "okay"; - }; +&ehci0 { + status = "okay"; +}; - ehci1: usb@01c1b000 { - status = "okay"; - }; +&ehci1 { + status = "okay"; +}; - pio: pinctrl@01c20800 { - led_pins_m9: led_pins@0 { - allwinner,pins = "PH13"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; - }; - - mmc0_cd_pin_m9: mmc0_cd_pin@0 { - allwinner,pins = "PH22"; - allwinner,function = "gpio_in"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; - }; - - usb1_vbus_pin_m9: usb1_vbus_pin@0 { - allwinner,pins = "PC27"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; - }; - }; +&gmac { + pinctrl-names = "default"; + pinctrl-0 = <&gmac_pins_mii_a>; + phy = <&phy1>; + phy-mode = "mii"; + status = "okay"; - uart0: serial@01c28000 { - pinctrl-names = "default"; - pinctrl-0 = <&uart0_pins_a>; - status = "okay"; - }; + phy1: ethernet-phy@1 { + reg = <1>; + }; +}; - gmac: ethernet@01c30000 { - pinctrl-names = "default"; - pinctrl-0 = <&gmac_pins_mii_a>; - phy = <&phy1>; - phy-mode = "mii"; - status = "okay"; +&ir { + pinctrl-names = "default"; + pinctrl-0 = <&ir_pins_a>; + status = "okay"; +}; - phy1: ethernet-phy@1 { - reg = <1>; - }; - }; +&mmc0 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_m9>; + vmmc-supply = <®_vcc3v3>; + bus-width = <4>; + cd-gpios = <&pio 7 22 GPIO_ACTIVE_HIGH>; /* PH22 */ + cd-inverted; + status = "okay"; +}; - ir@01f02000 { - pinctrl-names = "default"; - pinctrl-0 = <&ir_pins_a>; - status = "okay"; - }; +&pio { + led_pins_m9: led_pins@0 { + allwinner,pins = "PH13"; + allwinner,function = "gpio_out"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; - leds { - compatible = "gpio-leds"; - pinctrl-names = "default"; - pinctrl-0 = <&led_pins_m9>; - - blue { - label = "m9:blue:usr"; - gpios = <&pio 7 13 GPIO_ACTIVE_HIGH>; - }; + mmc0_cd_pin_m9: mmc0_cd_pin@0 { + allwinner,pins = "PH22"; + allwinner,function = "gpio_in"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; }; - reg_usb1_vbus: usb1-vbus { - pinctrl-names = "default"; - pinctrl-0 = <&usb1_vbus_pin_m9>; - gpio = <&pio 2 27 GPIO_ACTIVE_HIGH>; - status = "okay"; + usb1_vbus_pin_m9: usb1_vbus_pin@0 { + allwinner,pins = "PC27"; + allwinner,function = "gpio_out"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; }; + +®_usb1_vbus { + pinctrl-names = "default"; + pinctrl-0 = <&usb1_vbus_pin_m9>; + gpio = <&pio 2 27 GPIO_ACTIVE_HIGH>; + status = "okay"; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pins_a>; + status = "okay"; +}; + +&usbphy { + usb1_vbus-supply = <®_usb1_vbus>; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/sun6i-a31-mele-a1000g-quad.dts b/arch/arm/boot/dts/sun6i-a31-mele-a1000g-quad.dts new file mode 100644 index 000000000..4404f37d1 --- /dev/null +++ b/arch/arm/boot/dts/sun6i-a31-mele-a1000g-quad.dts @@ -0,0 +1,149 @@ +/* + * Copyright 2014 Hans de Goede <hdegoede@redhat.com> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; +#include "sun6i-a31.dtsi" +#include "sunxi-common-regulators.dtsi" + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/pinctrl/sun4i-a10.h> + +/ { + model = "Mele A1000G Quad top set box"; + compatible = "mele,a1000g-quad", "allwinner,sun6i-a31"; + + aliases { + serial0 = &uart0; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&led_pins_m9>; + + blue { + label = "m9:blue:usr"; + gpios = <&pio 7 13 GPIO_ACTIVE_HIGH>; + }; + }; +}; + +&ehci0 { + status = "okay"; +}; + +&ehci1 { + status = "okay"; +}; + +&gmac { + pinctrl-names = "default"; + pinctrl-0 = <&gmac_pins_mii_a>; + phy = <&phy1>; + phy-mode = "mii"; + status = "okay"; + + phy1: ethernet-phy@1 { + reg = <1>; + }; +}; + +&ir { + pinctrl-names = "default"; + pinctrl-0 = <&ir_pins_a>; + status = "okay"; +}; + +&mmc0 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_m9>; + vmmc-supply = <®_vcc3v3>; + bus-width = <4>; + cd-gpios = <&pio 7 22 GPIO_ACTIVE_HIGH>; /* PH22 */ + cd-inverted; + status = "okay"; +}; + +&pio { + led_pins_m9: led_pins@0 { + allwinner,pins = "PH13"; + allwinner,function = "gpio_out"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + }; + + mmc0_cd_pin_m9: mmc0_cd_pin@0 { + allwinner,pins = "PH22"; + allwinner,function = "gpio_in"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; + }; + + usb1_vbus_pin_m9: usb1_vbus_pin@0 { + allwinner,pins = "PC27"; + allwinner,function = "gpio_out"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + }; +}; + +®_usb1_vbus { + pinctrl-names = "default"; + pinctrl-0 = <&usb1_vbus_pin_m9>; + gpio = <&pio 2 27 GPIO_ACTIVE_HIGH>; + status = "okay"; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pins_a>; + status = "okay"; +}; + +&usbphy { + usb1_vbus-supply = <®_usb1_vbus>; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/sun6i-a31.dtsi b/arch/arm/boot/dts/sun6i-a31.dtsi index fa2f403cc..008047a01 100644 --- a/arch/arm/boot/dts/sun6i-a31.dtsi +++ b/arch/arm/boot/dts/sun6i-a31.dtsi @@ -18,11 +18,6 @@ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * You should have received a copy of the GNU General Public - * License along with this file; if not, write to the Free - * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, - * MA 02110-1301 USA - * * Or, alternatively, * * b) Permission is hereby granted, free of charge, to any person @@ -50,6 +45,7 @@ #include "skeleton.dtsi" #include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/thermal/thermal.h> #include <dt-bindings/pinctrl/sun4i-a10.h> @@ -66,7 +62,8 @@ ranges; framebuffer@0 { - compatible = "allwinner,simple-framebuffer", "simple-framebuffer"; + compatible = "allwinner,simple-framebuffer", + "simple-framebuffer"; allwinner,pipeline = "de_be0-lcd0-hdmi"; clocks = <&pll6 0>; status = "disabled"; @@ -96,10 +93,22 @@ #address-cells = <1>; #size-cells = <0>; - cpu@0 { + cpu0: cpu@0 { compatible = "arm,cortex-a7"; device_type = "cpu"; reg = <0>; + clocks = <&cpu>; + clock-latency = <244144>; /* 8 32k periods */ + operating-points = < + /* kHz uV */ + 1008000 1200000 + 864000 1200000 + 720000 1100000 + 480000 1000000 + >; + #cooling-cells = <2>; + cooling-min-level = <0>; + cooling-max-level = <3>; }; cpu@1 { @@ -121,6 +130,38 @@ }; }; + thermal-zones { + cpu_thermal { + /* milliseconds */ + polling-delay-passive = <250>; + polling-delay = <1000>; + thermal-sensors = <&rtp>; + + cooling-maps { + map0 { + trip = <&cpu_alert0>; + cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + + trips { + cpu_alert0: cpu_alert0 { + /* milliCelsius */ + temperature = <70000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu_crit: cpu_crit { + /* milliCelsius */ + temperature = <100000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + }; + }; + memory { reg = <0x40000000 0x80000000>; }; @@ -196,6 +237,14 @@ reg = <0x01c20054 0x4>; clocks = <&osc32k>, <&osc24M>, <&axi>, <&pll6 0>; clock-output-names = "ahb1"; + + /* + * Clock AHB1 from PLL6, instead of CPU/AXI which + * has rate changes due to cpufreq. Also the DMA + * controller requires AHB1 clocked from PLL6. + */ + assigned-clocks = <&ahb1>; + assigned-clock-parents = <&pll6 0>; }; ahb1_gates: clk@01c20060 { @@ -251,9 +300,10 @@ reg = <0x01c2006c 0x4>; clocks = <&apb2>; clock-output-names = "apb2_i2c0", "apb2_i2c1", - "apb2_i2c2", "apb2_i2c3", "apb2_uart0", - "apb2_uart1", "apb2_uart2", "apb2_uart3", - "apb2_uart4", "apb2_uart5"; + "apb2_i2c2", "apb2_i2c3", + "apb2_uart0", "apb2_uart1", + "apb2_uart2", "apb2_uart3", + "apb2_uart4", "apb2_uart5"; }; mmc0_clk: clk@01c20088 { @@ -330,7 +380,7 @@ usb_clk: clk@01c200cc { #clock-cells = <1>; - #reset-cells = <1>; + #reset-cells = <1>; compatible = "allwinner,sun6i-a31-usb-clk"; reg = <0x01c200cc 0x4>; clocks = <&osc24M>; @@ -340,10 +390,13 @@ }; /* - * The following two are dummy clocks, placeholders used in the gmac_tx - * clock. The gmac driver will choose one parent depending on the PHY - * interface mode, using clk_set_rate auto-reparenting. - * The actual TX clock rate is not controlled by the gmac_tx clock. + * The following two are dummy clocks, placeholders + * used in the gmac_tx clock. The gmac driver will + * choose one parent depending on the PHY interface + * mode, using clk_set_rate auto-reparenting. + * + * The actual TX clock rate is not controlled by the + * gmac_tx clock. */ mii_phy_tx_clk: clk@1 { #clock-cells = <0>; @@ -381,10 +434,6 @@ clocks = <&ahb1_gates 6>; resets = <&ahb1_rst 6>; #dma-cells = <1>; - - /* DMA controller requires AHB1 clocked from PLL6 */ - assigned-clocks = <&ahb1>; - assigned-clock-parents = <&pll6 0>; }; mmc0: mmc@01c0f000 { @@ -402,6 +451,8 @@ reset-names = "ahb"; interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>; status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; }; mmc1: mmc@01c10000 { @@ -419,6 +470,8 @@ reset-names = "ahb"; interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>; status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; }; mmc2: mmc@01c11000 { @@ -436,6 +489,8 @@ reset-names = "ahb"; interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>; status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; }; mmc3: mmc@01c12000 { @@ -453,6 +508,8 @@ reset-names = "ahb"; interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>; status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; }; usbphy: phy@01c19400 { @@ -575,12 +632,21 @@ }; mmc0_pins_a: mmc0@0 { - allwinner,pins = "PF0","PF1","PF2","PF3","PF4","PF5"; + allwinner,pins = "PF0", "PF1", "PF2", + "PF3", "PF4", "PF5"; allwinner,function = "mmc0"; allwinner,drive = <SUN4I_PINCTRL_30_MA>; allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; + mmc1_pins_a: mmc1@0 { + allwinner,pins = "PG0", "PG1", "PG2", "PG3", + "PG4", "PG5"; + allwinner,function = "mmc1"; + allwinner,drive = <SUN4I_PINCTRL_30_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + }; + gmac_pins_mii_a: gmac_mii@0 { allwinner,pins = "PA0", "PA1", "PA2", "PA3", "PA8", "PA9", "PA11", @@ -805,7 +871,8 @@ }; timer@01c60000 { - compatible = "allwinner,sun6i-a31-hstimer", "allwinner,sun7i-a20-hstimer"; + compatible = "allwinner,sun6i-a31-hstimer", + "allwinner,sun7i-a20-hstimer"; reg = <0x01c60000 0x1000>; interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>, @@ -896,7 +963,8 @@ ar100: ar100_clk { compatible = "allwinner,sun6i-a31-ar100-clk"; #clock-cells = <0>; - clocks = <&osc32k>, <&osc24M>, <&pll6 0>, <&pll6 0>; + clocks = <&osc32k>, <&osc24M>, <&pll6 0>, + <&pll6 0>; clock-output-names = "ar100"; }; @@ -973,6 +1041,27 @@ allwinner,drive = <SUN4I_PINCTRL_10_MA>; allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; + + p2wi_pins: p2wi { + allwinner,pins = "PL0", "PL1"; + allwinner,function = "s_p2wi"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + }; + }; + + p2wi: i2c@01f03400 { + compatible = "allwinner,sun6i-a31-p2wi"; + reg = <0x01f03400 0x400>; + interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&apb0_gates 3>; + clock-frequency = <100000>; + resets = <&apb0_rst 3>; + pinctrl-names = "default"; + pinctrl-0 = <&p2wi_pins>; + status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; }; }; }; diff --git a/arch/arm/boot/dts/sun6i-a31s-cs908.dts b/arch/arm/boot/dts/sun6i-a31s-cs908.dts index bc3734f67..1e2411a2b 100644 --- a/arch/arm/boot/dts/sun6i-a31s-cs908.dts +++ b/arch/arm/boot/dts/sun6i-a31s-cs908.dts @@ -16,11 +16,6 @@ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * You should have received a copy of the GNU General Public - * License along with this library; if not, write to the Free - * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, - * MA 02110-1301 USA - * * Or, alternatively, * * b) Permission is hereby granted, free of charge, to any person @@ -53,10 +48,14 @@ / { model = "CSQ CS908 top set box"; compatible = "csq,cs908", "allwinner,sun6i-a31s"; -}; -&usbphy { - status = "okay"; + aliases { + serial0 = &uart0; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; }; &ehci0 { @@ -67,25 +66,6 @@ status = "okay"; }; -&ohci1 { - status = "okay"; -}; - -&pio { - usb1_vbus_pin_csq908: usb1_vbus_pin@0 { - allwinner,pins = "PC27"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; - }; -}; - -&uart0 { - pinctrl-names = "default"; - pinctrl-0 = <&uart0_pins_a>; - status = "okay"; -}; - &gmac { pinctrl-names = "default"; pinctrl-0 = <&gmac_pins_mii_a>; @@ -102,3 +82,17 @@ pinctrl-0 = <&ir_pins_a>; status = "okay"; }; + +&ohci1 { + status = "okay"; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pins_a>; + status = "okay"; +}; + +&usbphy { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/sun6i-a31s.dtsi b/arch/arm/boot/dts/sun6i-a31s.dtsi index eaf5ec8fd..c17a32771 100644 --- a/arch/arm/boot/dts/sun6i-a31s.dtsi +++ b/arch/arm/boot/dts/sun6i-a31s.dtsi @@ -16,11 +16,6 @@ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * You should have received a copy of the GNU General Public - * License along with this library; if not, write to the Free - * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, - * MA 02110-1301 USA - * * Or, alternatively, * * b) Permission is hereby granted, free of charge, to any person diff --git a/arch/arm/boot/dts/sun7i-a20-bananapi.dts b/arch/arm/boot/dts/sun7i-a20-bananapi.dts index 5dd139e77..9f7b472e6 100644 --- a/arch/arm/boot/dts/sun7i-a20-bananapi.dts +++ b/arch/arm/boot/dts/sun7i-a20-bananapi.dts @@ -18,11 +18,6 @@ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * You should have received a copy of the GNU General Public - * License along with this file; if not, write to the Free - * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, - * MA 02110-1301 USA - * * Or, alternatively, * * b) Permission is hereby granted, free of charge, to any person @@ -65,160 +60,164 @@ serial2 = &uart7; }; - soc@01c00000 { - spi0: spi@01c05000 { - pinctrl-names = "default"; - pinctrl-0 = <&spi0_pins_a>; - status = "okay"; - }; + chosen { + stdout-path = "serial0:115200n8"; + }; - mmc0: mmc@01c0f000 { - pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_bananapi>; - vmmc-supply = <®_vcc3v3>; - bus-width = <4>; - cd-gpios = <&pio 7 10 GPIO_ACTIVE_HIGH>; /* PH10 */ - cd-inverted; - status = "okay"; - }; + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&led_pins_bananapi>; - usbphy: phy@01c13400 { - usb1_vbus-supply = <®_usb1_vbus>; - usb2_vbus-supply = <®_usb2_vbus>; - status = "okay"; + green { + label = "bananapi:green:usr"; + gpios = <&pio 7 24 GPIO_ACTIVE_HIGH>; }; + }; - ehci0: usb@01c14000 { - status = "okay"; - }; + reg_gmac_3v3: gmac-3v3 { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&gmac_power_pin_bananapi>; + regulator-name = "gmac-3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + startup-delay-us = <100000>; + enable-active-high; + gpio = <&pio 7 23 GPIO_ACTIVE_HIGH>; + }; +}; - ohci0: usb@01c14400 { - status = "okay"; - }; +&ahci { + status = "okay"; +}; - ahci: sata@01c18000 { - status = "okay"; - }; +&ehci0 { + status = "okay"; +}; - ehci1: usb@01c1c000 { - status = "okay"; - }; +&ehci1 { + status = "okay"; +}; - ohci1: usb@01c1c400 { - status = "okay"; - }; +&gmac { + pinctrl-names = "default"; + pinctrl-0 = <&gmac_pins_rgmii_a>; + phy = <&phy1>; + phy-mode = "rgmii"; + phy-supply = <®_gmac_3v3>; + status = "okay"; - pinctrl@01c20800 { - mmc0_cd_pin_bananapi: mmc0_cd_pin@0 { - allwinner,pins = "PH10"; - allwinner,function = "gpio_in"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; - }; - - gmac_power_pin_bananapi: gmac_power_pin@0 { - allwinner,pins = "PH23"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; - }; - - led_pins_bananapi: led_pins@0 { - allwinner,pins = "PH24"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; - }; - }; + phy1: ethernet-phy@1 { + reg = <1>; + }; +}; - ir0: ir@01c21800 { - pinctrl-names = "default"; - pinctrl-0 = <&ir0_pins_a>; - status = "okay"; - }; +&i2c0 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins_a>; + status = "okay"; - uart0: serial@01c28000 { - pinctrl-names = "default"; - pinctrl-0 = <&uart0_pins_a>; - status = "okay"; - }; + axp209: pmic@34 { + compatible = "x-powers,axp209"; + reg = <0x34>; + interrupt-parent = <&nmi_intc>; + interrupts = <0 IRQ_TYPE_LEVEL_LOW>; - uart3: serial@01c28c00 { - pinctrl-names = "default"; - pinctrl-0 = <&uart3_pins_b>; - status = "okay"; - }; + interrupt-controller; + #interrupt-cells = <1>; + }; +}; - uart7: serial@01c29c00 { - pinctrl-names = "default"; - pinctrl-0 = <&uart7_pins_a>; - status = "okay"; - }; +&i2c2 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c2_pins_a>; + status = "okay"; +}; - i2c0: i2c@01c2ac00 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c0_pins_a>; - status = "okay"; +&ir0 { + pinctrl-names = "default"; + pinctrl-0 = <&ir0_rx_pins_a>; + status = "okay"; +}; - axp209: pmic@34 { - compatible = "x-powers,axp209"; - reg = <0x34>; - interrupt-parent = <&nmi_intc>; - interrupts = <0 IRQ_TYPE_LEVEL_LOW>; +&mmc0 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_bananapi>; + vmmc-supply = <®_vcc3v3>; + bus-width = <4>; + cd-gpios = <&pio 7 10 GPIO_ACTIVE_HIGH>; /* PH10 */ + cd-inverted; + status = "okay"; +}; - interrupt-controller; - #interrupt-cells = <1>; - }; - }; +&ohci0 { + status = "okay"; +}; - i2c2: i2c@01c2b400 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c2_pins_a>; - status = "okay"; - }; +&ohci1 { + status = "okay"; +}; - gmac: ethernet@01c50000 { - pinctrl-names = "default"; - pinctrl-0 = <&gmac_pins_rgmii_a>; - phy = <&phy1>; - phy-mode = "rgmii"; - phy-supply = <®_gmac_3v3>; - status = "okay"; - - phy1: ethernet-phy@1 { - reg = <1>; - }; - }; +&pio { + mmc0_cd_pin_bananapi: mmc0_cd_pin@0 { + allwinner,pins = "PH10"; + allwinner,function = "gpio_in"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; }; - leds { - compatible = "gpio-leds"; - pinctrl-names = "default"; - pinctrl-0 = <&led_pins_bananapi>; - - green { - label = "bananapi:green:usr"; - gpios = <&pio 7 24 GPIO_ACTIVE_HIGH>; - }; + gmac_power_pin_bananapi: gmac_power_pin@0 { + allwinner,pins = "PH23"; + allwinner,function = "gpio_out"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; - reg_usb1_vbus: usb1-vbus { - status = "okay"; + led_pins_bananapi: led_pins@0 { + allwinner,pins = "PH24"; + allwinner,function = "gpio_out"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; +}; - reg_usb2_vbus: usb2-vbus { - status = "okay"; - }; +®_usb1_vbus { + status = "okay"; +}; - reg_gmac_3v3: gmac-3v3 { - compatible = "regulator-fixed"; - pinctrl-names = "default"; - pinctrl-0 = <&gmac_power_pin_bananapi>; - regulator-name = "gmac-3v3"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - startup-delay-us = <100000>; - enable-active-high; - gpio = <&pio 7 23 GPIO_ACTIVE_HIGH>; - }; +®_usb2_vbus { + status = "okay"; +}; + +&spi0 { + pinctrl-names = "default"; + pinctrl-0 = <&spi0_pins_a>, + <&spi0_cs0_pins_a>, + <&spi0_cs1_pins_a>; + status = "okay"; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pins_a>; + status = "okay"; +}; + +&uart3 { + pinctrl-names = "default"; + pinctrl-0 = <&uart3_pins_b>; + status = "okay"; +}; + +&uart7 { + pinctrl-names = "default"; + pinctrl-0 = <&uart7_pins_a>; + status = "okay"; +}; + +&usbphy { + usb1_vbus-supply = <®_usb1_vbus>; + usb2_vbus-supply = <®_usb2_vbus>; + status = "okay"; }; diff --git a/arch/arm/boot/dts/sun7i-a20-bananapro.dts b/arch/arm/boot/dts/sun7i-a20-bananapro.dts index fb89fe7ed..18fcc87f4 100644 --- a/arch/arm/boot/dts/sun7i-a20-bananapro.dts +++ b/arch/arm/boot/dts/sun7i-a20-bananapro.dts @@ -16,11 +16,6 @@ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * You should have received a copy of the GNU General Public - * License along with this file; if not, write to the Free - * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, - * MA 02110-1301 USA - * * Or, alternatively, * * b) Permission is hereby granted, free of charge, to any person @@ -55,6 +50,16 @@ model = "LeMaker Banana Pro"; compatible = "lemaker,bananapro", "allwinner,sun7i-a20"; + aliases { + serial0 = &uart0; + serial1 = &uart4; + serial2 = &uart7; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + leds { compatible = "gpio-leds"; pinctrl-names = "default"; @@ -144,7 +149,7 @@ &ir0 { pinctrl-names = "default"; - pinctrl-0 = <&ir0_pins_a>; + pinctrl-0 = <&ir0_rx_pins_a>; status = "okay"; }; @@ -233,7 +238,9 @@ &spi0 { pinctrl-names = "default"; - pinctrl-0 = <&spi0_pins_a>; + pinctrl-0 = <&spi0_pins_a>, + <&spi0_cs0_pins_a>, + <&spi0_cs1_pins_a>; status = "okay"; }; @@ -243,9 +250,9 @@ status = "okay"; }; -&uart2 { +&uart4 { pinctrl-names = "default"; - pinctrl-0 = <&uart2_pins_a>; + pinctrl-0 = <&uart4_pins_b>; status = "okay"; }; diff --git a/arch/arm/boot/dts/sun7i-a20-cubieboard2.dts b/arch/arm/boot/dts/sun7i-a20-cubieboard2.dts index c4ab6edb6..39a51d514 100644 --- a/arch/arm/boot/dts/sun7i-a20-cubieboard2.dts +++ b/arch/arm/boot/dts/sun7i-a20-cubieboard2.dts @@ -18,11 +18,6 @@ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * You should have received a copy of the GNU General Public - * License along with this file; if not, write to the Free - * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, - * MA 02110-1301 USA - * * Or, alternatively, * * b) Permission is hereby granted, free of charge, to any person @@ -59,94 +54,12 @@ model = "Cubietech Cubieboard2"; compatible = "cubietech,cubieboard2", "allwinner,sun7i-a20"; - soc@01c00000 { - mmc0: mmc@01c0f000 { - pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>; - vmmc-supply = <®_vcc3v3>; - bus-width = <4>; - cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */ - cd-inverted; - status = "okay"; - }; - - usbphy: phy@01c13400 { - usb1_vbus-supply = <®_usb1_vbus>; - usb2_vbus-supply = <®_usb2_vbus>; - status = "okay"; - }; - - ehci0: usb@01c14000 { - status = "okay"; - }; - - ohci0: usb@01c14400 { - status = "okay"; - }; - - ahci: sata@01c18000 { - target-supply = <®_ahci_5v>; - status = "okay"; - }; - - ehci1: usb@01c1c000 { - status = "okay"; - }; - - ohci1: usb@01c1c400 { - status = "okay"; - }; - - pinctrl@01c20800 { - led_pins_cubieboard2: led_pins@0 { - allwinner,pins = "PH20", "PH21"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; - }; - }; - - ir0: ir@01c21800 { - pinctrl-names = "default"; - pinctrl-0 = <&ir0_pins_a>; - status = "okay"; - }; - - uart0: serial@01c28000 { - pinctrl-names = "default"; - pinctrl-0 = <&uart0_pins_a>; - status = "okay"; - }; - - i2c0: i2c@01c2ac00 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c0_pins_a>; - status = "okay"; - - axp209: pmic@34 { - reg = <0x34>; - interrupt-parent = <&nmi_intc>; - interrupts = <0 IRQ_TYPE_LEVEL_LOW>; - }; - }; - - i2c1: i2c@01c2b000 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c1_pins_a>; - status = "okay"; - }; - - gmac: ethernet@01c50000 { - pinctrl-names = "default"; - pinctrl-0 = <&gmac_pins_mii_a>; - phy = <&phy1>; - phy-mode = "mii"; - status = "okay"; + aliases { + serial0 = &uart0; + }; - phy1: ethernet-phy@1 { - reg = <1>; - }; - }; + chosen { + stdout-path = "serial0:115200n8"; }; leds { @@ -164,26 +77,94 @@ gpios = <&pio 7 20 GPIO_ACTIVE_HIGH>; }; }; +}; - reg_ahci_5v: ahci-5v { - status = "okay"; - }; +&ahci { + target-supply = <®_ahci_5v>; + status = "okay"; +}; - reg_usb1_vbus: usb1-vbus { - status = "okay"; +&cpu0 { + cpu-supply = <®_dcdc2>; +}; + +&ehci0 { + status = "okay"; +}; + +&ehci1 { + status = "okay"; +}; + +&gmac { + pinctrl-names = "default"; + pinctrl-0 = <&gmac_pins_mii_a>; + phy = <&phy1>; + phy-mode = "mii"; + status = "okay"; + + phy1: ethernet-phy@1 { + reg = <1>; }; +}; - reg_usb2_vbus: usb2-vbus { - status = "okay"; +&i2c0 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins_a>; + status = "okay"; + + axp209: pmic@34 { + reg = <0x34>; + interrupt-parent = <&nmi_intc>; + interrupts = <0 IRQ_TYPE_LEVEL_LOW>; }; }; -#include "axp209.dtsi" +&i2c1 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_pins_a>; + status = "okay"; +}; -&cpu0 { - cpu-supply = <®_dcdc2>; +&ir0 { + pinctrl-names = "default"; + pinctrl-0 = <&ir0_rx_pins_a>; + status = "okay"; +}; + +&mmc0 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>; + vmmc-supply = <®_vcc3v3>; + bus-width = <4>; + cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */ + cd-inverted; + status = "okay"; +}; + +&ohci0 { + status = "okay"; }; +&ohci1 { + status = "okay"; +}; + +&pio { + led_pins_cubieboard2: led_pins@0 { + allwinner,pins = "PH20", "PH21"; + allwinner,function = "gpio_out"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + }; +}; + +®_ahci_5v { + status = "okay"; +}; + +#include "axp209.dtsi" + ®_dcdc2 { regulator-always-on; regulator-min-microvolt = <1000000>; @@ -208,3 +189,23 @@ regulator-max-microvolt = <3000000>; regulator-name = "avcc"; }; + +®_usb1_vbus { + status = "okay"; +}; + +®_usb2_vbus { + status = "okay"; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pins_a>; + status = "okay"; +}; + +&usbphy { + usb1_vbus-supply = <®_usb1_vbus>; + usb2_vbus-supply = <®_usb2_vbus>; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/sun7i-a20-cubietruck.dts b/arch/arm/boot/dts/sun7i-a20-cubietruck.dts index 8f74a6495..4611e2f5a 100644 --- a/arch/arm/boot/dts/sun7i-a20-cubietruck.dts +++ b/arch/arm/boot/dts/sun7i-a20-cubietruck.dts @@ -18,11 +18,6 @@ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * You should have received a copy of the GNU General Public - * License along with this file; if not, write to the Free - * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, - * MA 02110-1301 USA - * * Or, alternatively, * * b) Permission is hereby granted, free of charge, to any person @@ -59,142 +54,12 @@ model = "Cubietech Cubietruck"; compatible = "cubietech,cubietruck", "allwinner,sun7i-a20"; - soc@01c00000 { - mmc0: mmc@01c0f000 { - pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>; - vmmc-supply = <®_vcc3v3>; - bus-width = <4>; - cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */ - cd-inverted; - status = "okay"; - }; - - mmc3: mmc@01c12000 { - pinctrl-names = "default"; - pinctrl-0 = <&mmc3_pins_a>; - vmmc-supply = <®_vmmc3>; - bus-width = <4>; - non-removable; - status = "okay"; - }; - - usbphy: phy@01c13400 { - usb0_vbus-supply = <®_usb0_vbus>; - usb1_vbus-supply = <®_usb1_vbus>; - usb2_vbus-supply = <®_usb2_vbus>; - status = "okay"; - }; - - ehci0: usb@01c14000 { - status = "okay"; - }; - - ohci0: usb@01c14400 { - status = "okay"; - }; - - ahci: sata@01c18000 { - target-supply = <®_ahci_5v>; - status = "okay"; - }; - - ehci1: usb@01c1c000 { - status = "okay"; - }; - - ohci1: usb@01c1c400 { - status = "okay"; - }; - - pinctrl@01c20800 { - mmc3_pins_a: mmc3@0 { - /* AP6210 requires pull-up */ - allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; - }; - - vmmc3_pin_cubietruck: vmmc3_pin@0 { - allwinner,pins = "PH9"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; - }; - - ahci_pwr_pin_cubietruck: ahci_pwr_pin@1 { - allwinner,pins = "PH12"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; - }; - - led_pins_cubietruck: led_pins@0 { - allwinner,pins = "PH7", "PH11", "PH20", "PH21"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; - }; - - usb0_vbus_pin_a: usb0_vbus_pin@0 { - allwinner,pins = "PH17"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; - }; - }; - - pwm: pwm@01c20e00 { - pinctrl-names = "default"; - pinctrl-0 = <&pwm0_pins_a>, <&pwm1_pins_a>; - status = "okay"; - }; - - ir0: ir@01c21800 { - pinctrl-names = "default"; - pinctrl-0 = <&ir0_pins_a>; - status = "okay"; - }; - - uart0: serial@01c28000 { - pinctrl-names = "default"; - pinctrl-0 = <&uart0_pins_a>; - status = "okay"; - }; - - i2c0: i2c@01c2ac00 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c0_pins_a>; - status = "okay"; - - axp209: pmic@34 { - reg = <0x34>; - interrupt-parent = <&nmi_intc>; - interrupts = <0 IRQ_TYPE_LEVEL_LOW>; - }; - }; - - i2c1: i2c@01c2b000 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c1_pins_a>; - status = "okay"; - }; - - i2c2: i2c@01c2b400 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c2_pins_a>; - status = "okay"; - }; - - gmac: ethernet@01c50000 { - pinctrl-names = "default"; - pinctrl-0 = <&gmac_pins_rgmii_a>; - phy = <&phy1>; - phy-mode = "rgmii"; - status = "okay"; + aliases { + serial0 = &uart0; + }; - phy1: ethernet-phy@1 { - reg = <1>; - }; - }; + chosen { + stdout-path = "serial0:115200n8"; }; leds { @@ -223,26 +88,6 @@ }; }; - reg_ahci_5v: ahci-5v { - pinctrl-0 = <&ahci_pwr_pin_cubietruck>; - gpio = <&pio 7 12 GPIO_ACTIVE_HIGH>; - status = "okay"; - }; - - reg_usb0_vbus: usb0-vbus { - pinctrl-0 = <&usb0_vbus_pin_a>; - gpio = <&pio 7 17 GPIO_ACTIVE_HIGH>; - status = "okay"; - }; - - reg_usb1_vbus: usb1-vbus { - status = "okay"; - }; - - reg_usb2_vbus: usb2-vbus { - status = "okay"; - }; - reg_vmmc3: vmmc3 { compatible = "regulator-fixed"; pinctrl-names = "default"; @@ -255,12 +100,149 @@ }; }; -#include "axp209.dtsi" +&ahci { + target-supply = <®_ahci_5v>; + status = "okay"; +}; &cpu0 { cpu-supply = <®_dcdc2>; }; +&ehci0 { + status = "okay"; +}; + +&ehci1 { + status = "okay"; +}; + +&gmac { + pinctrl-names = "default"; + pinctrl-0 = <&gmac_pins_rgmii_a>; + phy = <&phy1>; + phy-mode = "rgmii"; + status = "okay"; + + phy1: ethernet-phy@1 { + reg = <1>; + }; +}; + +&i2c0 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins_a>; + status = "okay"; + + axp209: pmic@34 { + reg = <0x34>; + interrupt-parent = <&nmi_intc>; + interrupts = <0 IRQ_TYPE_LEVEL_LOW>; + }; +}; + +&i2c1 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_pins_a>; + status = "okay"; +}; + +&i2c2 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c2_pins_a>; + status = "okay"; +}; + +&ir0 { + pinctrl-names = "default"; + pinctrl-0 = <&ir0_rx_pins_a>; + status = "okay"; +}; + +&mmc0 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>; + vmmc-supply = <®_vcc3v3>; + bus-width = <4>; + cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */ + cd-inverted; + status = "okay"; +}; + +&mmc3 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc3_pins_a>; + vmmc-supply = <®_vmmc3>; + bus-width = <4>; + non-removable; + status = "okay"; + + brcmf: bcrmf@1 { + reg = <1>; + compatible = "brcm,bcm4329-fmac"; + interrupt-parent = <&pio>; + interrupts = <10 IRQ_TYPE_LEVEL_LOW>; /* PH10 / EINT10 */ + interrupt-names = "host-wake"; + }; +}; + +&mmc3_pins_a { + /* AP6210 requires pull-up */ + allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; +}; + +&ohci0 { + status = "okay"; +}; + +&ohci1 { + status = "okay"; +}; + +&pio { + vmmc3_pin_cubietruck: vmmc3_pin@0 { + allwinner,pins = "PH9"; + allwinner,function = "gpio_out"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + }; + + ahci_pwr_pin_cubietruck: ahci_pwr_pin@1 { + allwinner,pins = "PH12"; + allwinner,function = "gpio_out"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + }; + + led_pins_cubietruck: led_pins@0 { + allwinner,pins = "PH7", "PH11", "PH20", "PH21"; + allwinner,function = "gpio_out"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + }; + + usb0_vbus_pin_a: usb0_vbus_pin@0 { + allwinner,pins = "PH17"; + allwinner,function = "gpio_out"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + }; +}; + +&pwm { + pinctrl-names = "default"; + pinctrl-0 = <&pwm0_pins_a>, <&pwm1_pins_a>; + status = "okay"; +}; + +®_ahci_5v { + pinctrl-0 = <&ahci_pwr_pin_cubietruck>; + gpio = <&pio 7 12 GPIO_ACTIVE_HIGH>; + status = "okay"; +}; + +#include "axp209.dtsi" + ®_dcdc2 { regulator-always-on; regulator-min-microvolt = <1000000>; @@ -285,3 +267,30 @@ regulator-max-microvolt = <3000000>; regulator-name = "avcc"; }; + +®_usb0_vbus { + pinctrl-0 = <&usb0_vbus_pin_a>; + gpio = <&pio 7 17 GPIO_ACTIVE_HIGH>; + status = "okay"; +}; + +®_usb1_vbus { + status = "okay"; +}; + +®_usb2_vbus { + status = "okay"; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pins_a>; + status = "okay"; +}; + +&usbphy { + usb0_vbus-supply = <®_usb0_vbus>; + usb1_vbus-supply = <®_usb1_vbus>; + usb2_vbus-supply = <®_usb2_vbus>; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/sun7i-a20-hummingbird.dts b/arch/arm/boot/dts/sun7i-a20-hummingbird.dts index 86a944ce1..37f4a5497 100644 --- a/arch/arm/boot/dts/sun7i-a20-hummingbird.dts +++ b/arch/arm/boot/dts/sun7i-a20-hummingbird.dts @@ -3,12 +3,43 @@ * * Wills Wang <wills.wang.open@gmail.com> * - * The code contained herein is licensed under the GNU General Public - * License. You may obtain a copy of the GNU General Public License - * Version 2 or later at the following locations: + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. * - * http://www.opensource.org/licenses/gpl-license.html - * http://www.gnu.org/copyleft/gpl.html + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; @@ -31,197 +62,8 @@ serial4 = &uart5; }; - soc@01c00000 { - mmc0: mmc@01c0f000 { - pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>; - vmmc-supply = <®_vcc3v0>; - bus-width = <4>; - cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */ - cd-inverted; - status = "okay"; - }; - - mmc3: mmc@01c12000 { - pinctrl-names = "default"; - pinctrl-0 = <&mmc3_pins_a>; - vmmc-supply = <®_mmc3_vdd>; - bus-width = <4>; - non-removable; - status = "okay"; - }; - - usbphy: phy@01c13400 { - usb1_vbus-supply = <®_usb1_vbus>; - usb2_vbus-supply = <®_usb2_vbus>; - status = "okay"; - }; - - ehci0: usb@01c14000 { - status = "okay"; - }; - - ohci0: usb@01c14400 { - status = "okay"; - }; - - ahci: sata@01c18000 { - target-supply = <®_ahci_5v>; - status = "okay"; - }; - - ehci1: usb@01c1c000 { - status = "okay"; - }; - - ohci1: usb@01c1c400 { - status = "okay"; - }; - - pio: pinctrl@01c20800 { - ahci_pwr_pin_a20_hummingbird: ahci_pwr_pin@0 { - allwinner,pins = "PH15"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; - }; - - usb1_vbus_pin_a20_hummingbird: usb1_vbus_pin@0 { - allwinner,pins = "PH2"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; - }; - - mmc3_vdd_pin_a20_hummingbird: mmc3_vdd_pin@0 { - allwinner,pins = "PH9"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; - }; - - gmac_vdd_pin_a20_hummingbird: gmac_vdd_pin@0 { - allwinner,pins = "PH16"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; - }; - }; - - pwm: pwm@01c20e00 { - pinctrl-names = "default"; - pinctrl-0 = <&pwm0_pins_a>; - status = "okay"; - }; - - ir0: ir@01c21800 { - pinctrl-names = "default"; - pinctrl-0 = <&ir0_pins_a>; - status = "okay"; - }; - - uart0: serial@01c28000 { - pinctrl-names = "default"; - pinctrl-0 = <&uart0_pins_a>; - status = "okay"; - }; - - uart2: serial@01c28800 { - pinctrl-names = "default"; - pinctrl-0 = <&uart2_pins_a>; - status = "okay"; - }; - - uart3: serial@01c28c00 { - pinctrl-names = "default"; - pinctrl-0 = <&uart3_pins_a>; - status = "okay"; - }; - - uart4: serial@01c29000 { - pinctrl-names = "default"; - pinctrl-0 = <&uart4_pins_a>; - status = "okay"; - }; - - uart5: serial@01c29400 { - pinctrl-names = "default"; - pinctrl-0 = <&uart5_pins_a>; - status = "okay"; - }; - - i2c0: i2c@01c2ac00 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c0_pins_a>; - status = "okay"; - - axp209: pmic@34 { - compatible = "x-powers,axp209"; - reg = <0x34>; - interrupt-parent = <&nmi_intc>; - interrupts = <0 IRQ_TYPE_LEVEL_LOW>; - interrupt-controller; - #interrupt-cells = <1>; - }; - }; - - i2c1: i2c@01c2b000 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c1_pins_a>; - status = "okay"; - }; - - i2c2: i2c@01c2b400 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c2_pins_a>; - status = "okay"; - }; - - i2c3: i2c@01c2b800 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c3_pins_a>; - status = "okay"; - }; - - spi2: spi@01c17000 { - pinctrl-names = "default"; - pinctrl-0 = <&spi2_pins_b>; - status = "okay"; - }; - - gmac: ethernet@01c50000 { - pinctrl-names = "default"; - pinctrl-0 = <&gmac_pins_rgmii_a>; - phy = <&phy1>; - phy-mode = "rgmii"; - phy-supply = <®_gmac_vdd>; - /* phy reset config */ - snps,reset-gpio = <&pio 0 17 GPIO_ACTIVE_HIGH>; /* PA17 */ - snps,reset-active-low; - /* wait 1s after reset, otherwise fail to read phy id */ - snps,reset-delays-us = <0 10000 1000000>; - status = "okay"; - - phy1: ethernet-phy@1 { - reg = <1>; - }; - }; - }; - - reg_ahci_5v: ahci-5v { - pinctrl-0 = <&ahci_pwr_pin_a20_hummingbird>; - gpio = <&pio 7 15 GPIO_ACTIVE_HIGH>; /* PH15 */ - status = "okay"; - }; - - reg_usb1_vbus: usb1-vbus { - pinctrl-0 = <&usb1_vbus_pin_a20_hummingbird>; - gpio = <&pio 7 2 GPIO_ACTIVE_HIGH>; /* PH2 */ - status = "okay"; - }; - - reg_usb2_vbus: usb2-vbus { - status = "okay"; + chosen { + stdout-path = "serial0:115200n8"; }; reg_mmc3_vdd: mmc3_vdd { @@ -246,3 +88,195 @@ gpio = <&pio 7 16 GPIO_ACTIVE_HIGH>; /* PH16 */ }; }; + +&ahci { + target-supply = <®_ahci_5v>; + status = "okay"; +}; + +&ehci0 { + status = "okay"; +}; + +&ehci1 { + status = "okay"; +}; + +&gmac { + pinctrl-names = "default"; + pinctrl-0 = <&gmac_pins_rgmii_a>; + phy = <&phy1>; + phy-mode = "rgmii"; + phy-supply = <®_gmac_vdd>; + /* phy reset config */ + snps,reset-gpio = <&pio 0 17 GPIO_ACTIVE_HIGH>; /* PA17 */ + snps,reset-active-low; + /* wait 1s after reset, otherwise fail to read phy id */ + snps,reset-delays-us = <0 10000 1000000>; + status = "okay"; + + phy1: ethernet-phy@1 { + reg = <1>; + }; +}; + +&i2c0 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins_a>; + status = "okay"; + + axp209: pmic@34 { + compatible = "x-powers,axp209"; + reg = <0x34>; + interrupt-parent = <&nmi_intc>; + interrupts = <0 IRQ_TYPE_LEVEL_LOW>; + interrupt-controller; + #interrupt-cells = <1>; + }; +}; + +&i2c1 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_pins_a>; + status = "okay"; +}; + +&i2c2 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c2_pins_a>; + status = "okay"; +}; + +&i2c3 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c3_pins_a>; + status = "okay"; +}; + +&ir0 { + pinctrl-names = "default"; + pinctrl-0 = <&ir0_rx_pins_a>; + status = "okay"; +}; + +&mmc0 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>; + vmmc-supply = <®_vcc3v0>; + bus-width = <4>; + cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */ + cd-inverted; + status = "okay"; +}; + +&mmc3 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc3_pins_a>; + vmmc-supply = <®_mmc3_vdd>; + bus-width = <4>; + non-removable; + status = "okay"; +}; + +&ohci0 { + status = "okay"; +}; + +&ohci1 { + status = "okay"; +}; + +&pio { + ahci_pwr_pin_a20_hummingbird: ahci_pwr_pin@0 { + allwinner,pins = "PH15"; + allwinner,function = "gpio_out"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + }; + + usb1_vbus_pin_a20_hummingbird: usb1_vbus_pin@0 { + allwinner,pins = "PH2"; + allwinner,function = "gpio_out"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + }; + + mmc3_vdd_pin_a20_hummingbird: mmc3_vdd_pin@0 { + allwinner,pins = "PH9"; + allwinner,function = "gpio_out"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + }; + + gmac_vdd_pin_a20_hummingbird: gmac_vdd_pin@0 { + allwinner,pins = "PH16"; + allwinner,function = "gpio_out"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + }; +}; + +&pwm { + pinctrl-names = "default"; + pinctrl-0 = <&pwm0_pins_a>; + status = "okay"; +}; + +®_ahci_5v { + pinctrl-0 = <&ahci_pwr_pin_a20_hummingbird>; + gpio = <&pio 7 15 GPIO_ACTIVE_HIGH>; /* PH15 */ + status = "okay"; +}; + +®_usb1_vbus { + pinctrl-0 = <&usb1_vbus_pin_a20_hummingbird>; + gpio = <&pio 7 2 GPIO_ACTIVE_HIGH>; /* PH2 */ + status = "okay"; +}; + +®_usb2_vbus { + status = "okay"; +}; + +&spi2 { + pinctrl-names = "default"; + pinctrl-0 = <&spi2_pins_b>, + <&spi2_cs0_pins_b>; + status = "okay"; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pins_a>; + status = "okay"; +}; + +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&uart2_pins_a>; + status = "okay"; +}; + +&uart3 { + pinctrl-names = "default"; + pinctrl-0 = <&uart3_pins_a>; + status = "okay"; +}; + +&uart4 { + pinctrl-names = "default"; + pinctrl-0 = <&uart4_pins_a>; + status = "okay"; +}; + +&uart5 { + pinctrl-names = "default"; + pinctrl-0 = <&uart5_pins_a>; + status = "okay"; +}; + +&usbphy { + usb1_vbus-supply = <®_usb1_vbus>; + usb2_vbus-supply = <®_usb2_vbus>; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/sun7i-a20-i12-tvbox.dts b/arch/arm/boot/dts/sun7i-a20-i12-tvbox.dts index 06148b4d0..f32f6f20d 100644 --- a/arch/arm/boot/dts/sun7i-a20-i12-tvbox.dts +++ b/arch/arm/boot/dts/sun7i-a20-i12-tvbox.dts @@ -16,11 +16,6 @@ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * You should have received a copy of the GNU General Public - * License along with this file; if not, write to the Free - * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, - * MA 02110-1301 USA - * * Or, alternatively, * * b) Permission is hereby granted, free of charge, to any person @@ -57,123 +52,12 @@ model = "I12 / Q5 / QT840A A20 tvbox"; compatible = "allwinner,i12-tvbox", "allwinner,sun7i-a20"; - soc@01c00000 { - mmc0: mmc@01c0f000 { - pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>; - vmmc-supply = <®_vcc3v3>; - bus-width = <4>; - cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */ - cd-inverted; - status = "okay"; - }; - - mmc3: mmc@01c12000 { - pinctrl-names = "default"; - pinctrl-0 = <&mmc3_pins_a>; - vmmc-supply = <®_vmmc3>; - bus-width = <4>; - non-removable; - status = "okay"; - }; - - usbphy: phy@01c13400 { - usb1_vbus-supply = <®_usb1_vbus>; - usb2_vbus-supply = <®_usb2_vbus>; - status = "okay"; - }; - - ehci0: usb@01c14000 { - status = "okay"; - }; - - ohci0: usb@01c14400 { - status = "okay"; - }; - - ehci1: usb@01c1c000 { - status = "okay"; - }; - - ohci1: usb@01c1c400 { - status = "okay"; - }; - - pinctrl@01c20800 { - mmc3_pins_a: mmc3@0 { - /* AP6210 / AP6330 requires pull-up */ - allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; - }; - - vmmc3_pin_i12_tvbox: vmmc3_pin@0 { - allwinner,pins = "PH2"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; - }; - - vmmc3_io_pin_i12_tvbox: vmmc3_io_pin@0 { - allwinner,pins = "PH12"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; - }; - - gmac_power_pin_i12_tvbox: gmac_power_pin@0 { - allwinner,pins = "PH21"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; - }; - - led_pins_i12_tvbox: led_pins@0 { - allwinner,pins = "PH9", "PH20"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; - }; - }; - - ir0: ir@01c21800 { - pinctrl-names = "default"; - pinctrl-0 = <&ir0_pins_a>; - status = "okay"; - }; - - uart0: serial@01c28000 { - pinctrl-names = "default"; - pinctrl-0 = <&uart0_pins_a>; - status = "okay"; - }; - - i2c0: i2c@01c2ac00 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c0_pins_a>; - status = "okay"; - - axp209: pmic@34 { - compatible = "x-powers,axp209"; - reg = <0x34>; - interrupt-parent = <&nmi_intc>; - interrupts = <0 IRQ_TYPE_LEVEL_LOW>; - - interrupt-controller; - #interrupt-cells = <1>; - }; - }; + aliases { + serial0 = &uart0; + }; - gmac: ethernet@01c50000 { - pinctrl-names = "default"; - pinctrl-0 = <&gmac_pins_mii_a>; - phy = <&phy1>; - phy-mode = "mii"; - phy-supply = <®_gmac_3v3>; - status = "okay"; - - phy1: ethernet-phy@1 { - reg = <1>; - }; - }; + chosen { + stdout-path = "serial0:115200n8"; }; leds { @@ -192,14 +76,6 @@ }; }; - reg_usb1_vbus: usb1-vbus { - status = "okay"; - }; - - reg_usb2_vbus: usb2-vbus { - status = "okay"; - }; - reg_vmmc3: vmmc3 { compatible = "regulator-fixed"; pinctrl-names = "default"; @@ -236,3 +112,136 @@ gpio = <&pio 7 21 GPIO_ACTIVE_HIGH>; }; }; + +&ehci0 { + status = "okay"; +}; + +&ehci1 { + status = "okay"; +}; + +&gmac { + pinctrl-names = "default"; + pinctrl-0 = <&gmac_pins_mii_a>; + phy = <&phy1>; + phy-mode = "mii"; + phy-supply = <®_gmac_3v3>; + status = "okay"; + + phy1: ethernet-phy@1 { + reg = <1>; + }; +}; + +&i2c0 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins_a>; + status = "okay"; + + axp209: pmic@34 { + compatible = "x-powers,axp209"; + reg = <0x34>; + interrupt-parent = <&nmi_intc>; + interrupts = <0 IRQ_TYPE_LEVEL_LOW>; + + interrupt-controller; + #interrupt-cells = <1>; + }; +}; + +&ir0 { + pinctrl-names = "default"; + pinctrl-0 = <&ir0_rx_pins_a>; + status = "okay"; +}; + +&mmc0 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>; + vmmc-supply = <®_vcc3v3>; + bus-width = <4>; + cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */ + cd-inverted; + status = "okay"; +}; + +&mmc3 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc3_pins_a>; + vmmc-supply = <®_vmmc3>; + bus-width = <4>; + non-removable; + status = "okay"; + + brcmf: bcrmf@1 { + reg = <1>; + compatible = "brcm,bcm4329-fmac"; + interrupt-parent = <&pio>; + interrupts = <10 IRQ_TYPE_LEVEL_LOW>; /* PH10 / EINT10 */ + interrupt-names = "host-wake"; + }; +}; + +&mmc3_pins_a { + /* AP6210 / AP6330 requires pull-up */ + allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; +}; + +&ohci0 { + status = "okay"; +}; + +&ohci1 { + status = "okay"; +}; + +&pio { + vmmc3_pin_i12_tvbox: vmmc3_pin@0 { + allwinner,pins = "PH2"; + allwinner,function = "gpio_out"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + }; + + vmmc3_io_pin_i12_tvbox: vmmc3_io_pin@0 { + allwinner,pins = "PH12"; + allwinner,function = "gpio_out"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + }; + + gmac_power_pin_i12_tvbox: gmac_power_pin@0 { + allwinner,pins = "PH21"; + allwinner,function = "gpio_out"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + }; + + led_pins_i12_tvbox: led_pins@0 { + allwinner,pins = "PH9", "PH20"; + allwinner,function = "gpio_out"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + }; +}; + +®_usb1_vbus { + status = "okay"; +}; + +®_usb2_vbus { + status = "okay"; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pins_a>; + status = "okay"; +}; + +&usbphy { + usb1_vbus-supply = <®_usb1_vbus>; + usb2_vbus-supply = <®_usb2_vbus>; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/sun7i-a20-m3.dts b/arch/arm/boot/dts/sun7i-a20-m3.dts index 5add9f243..8d9ea48dd 100644 --- a/arch/arm/boot/dts/sun7i-a20-m3.dts +++ b/arch/arm/boot/dts/sun7i-a20-m3.dts @@ -18,11 +18,6 @@ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * You should have received a copy of the GNU General Public - * License along with this file; if not, write to the Free - * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, - * MA 02110-1301 USA - * * Or, alternatively, * * b) Permission is hereby granted, free of charge, to any person @@ -59,114 +54,120 @@ model = "Mele M3"; compatible = "mele,m3", "allwinner,sun7i-a20"; - soc@01c00000 { - mmc0: mmc@01c0f000 { - pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>; - vmmc-supply = <®_vcc3v3>; - bus-width = <4>; - cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */ - cd-inverted; - status = "okay"; - }; + aliases { + serial0 = &uart0; + }; - mmc2: mmc@01c11000 { - pinctrl-names = "default"; - pinctrl-0 = <&mmc2_pins_a>; - vmmc-supply = <®_vcc3v3>; - bus-width = <4>; - non-removable; - status = "okay"; - }; + chosen { + stdout-path = "serial0:115200n8"; + }; - usbphy: phy@01c13400 { - usb1_vbus-supply = <®_usb1_vbus>; - usb2_vbus-supply = <®_usb2_vbus>; - status = "okay"; - }; + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&led_pins_m3>; - ehci0: usb@01c14000 { - status = "okay"; + blue { + label = "m3:blue:usr"; + gpios = <&pio 7 20 GPIO_ACTIVE_HIGH>; }; + }; +}; - ohci0: usb@01c14400 { - status = "okay"; - }; +&ehci0 { + status = "okay"; +}; - ehci1: usb@01c1c000 { - status = "okay"; - }; +&ehci1 { + status = "okay"; +}; - ohci1: usb@01c1c400 { - status = "okay"; - }; +&gmac { + pinctrl-names = "default"; + pinctrl-0 = <&gmac_pins_mii_a>; + phy = <&phy1>; + phy-mode = "mii"; + status = "okay"; - pinctrl@01c20800 { - led_pins_m3: led_pins@0 { - allwinner,pins = "PH20"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; - }; - }; + phy1: ethernet-phy@1 { + reg = <1>; + }; +}; - ir0: ir@01c21800 { - pinctrl-names = "default"; - pinctrl-0 = <&ir0_pins_a>; - status = "okay"; - }; +&i2c0 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins_a>; + status = "okay"; - uart0: serial@01c28000 { - pinctrl-names = "default"; - pinctrl-0 = <&uart0_pins_a>; - status = "okay"; - }; + axp209: pmic@34 { + compatible = "x-powers,axp209"; + reg = <0x34>; + interrupt-parent = <&nmi_intc>; + interrupts = <0 IRQ_TYPE_LEVEL_LOW>; - i2c0: i2c@01c2ac00 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c0_pins_a>; - status = "okay"; + interrupt-controller; + #interrupt-cells = <1>; + }; +}; - axp209: pmic@34 { - compatible = "x-powers,axp209"; - reg = <0x34>; - interrupt-parent = <&nmi_intc>; - interrupts = <0 IRQ_TYPE_LEVEL_LOW>; +&ir0 { + pinctrl-names = "default"; + pinctrl-0 = <&ir0_rx_pins_a>; + status = "okay"; +}; - interrupt-controller; - #interrupt-cells = <1>; - }; - }; +&mmc0 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>; + vmmc-supply = <®_vcc3v3>; + bus-width = <4>; + cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */ + cd-inverted; + status = "okay"; +}; - gmac: ethernet@01c50000 { - pinctrl-names = "default"; - pinctrl-0 = <&gmac_pins_mii_a>; - phy = <&phy1>; - phy-mode = "mii"; - status = "okay"; +&mmc2 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc2_pins_a>; + vmmc-supply = <®_vcc3v3>; + bus-width = <4>; + non-removable; + status = "okay"; +}; - phy1: ethernet-phy@1 { - reg = <1>; - }; - }; - }; +&ohci0 { + status = "okay"; +}; - leds { - compatible = "gpio-leds"; - pinctrl-names = "default"; - pinctrl-0 = <&led_pins_m3>; +&ohci1 { + status = "okay"; +}; - blue { - label = "m3:blue:usr"; - gpios = <&pio 7 20 GPIO_ACTIVE_HIGH>; - }; +&pio { + led_pins_m3: led_pins@0 { + allwinner,pins = "PH20"; + allwinner,function = "gpio_out"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; +}; - reg_usb1_vbus: usb1-vbus { - status = "okay"; - }; +®_usb1_vbus { + status = "okay"; +}; - reg_usb2_vbus: usb2-vbus { - status = "okay"; - }; +®_usb2_vbus { + status = "okay"; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pins_a>; + status = "okay"; +}; + +&usbphy { + usb1_vbus-supply = <®_usb1_vbus>; + usb2_vbus-supply = <®_usb2_vbus>; + status = "okay"; }; diff --git a/arch/arm/boot/dts/sun7i-a20-mk808c.dts b/arch/arm/boot/dts/sun7i-a20-mk808c.dts new file mode 100644 index 000000000..4f432f8ad --- /dev/null +++ b/arch/arm/boot/dts/sun7i-a20-mk808c.dts @@ -0,0 +1,148 @@ +/* + * Copyright 2015 Marcus Cooper + * + * Marcus Cooper <codekipper@gmail.com> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public + * License along with this file; if not, write to the Free + * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; +#include "sun7i-a20.dtsi" +#include "sunxi-common-regulators.dtsi" + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/interrupt-controller/irq.h> + +/ { + model = "mk808c"; + compatible = "allwinner,mk808c", "allwinner,sun7i-a20"; + + aliases { + serial0 = &uart0; + serial1 = &uart2; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; +}; + +&ehci0 { + status = "okay"; +}; + +&ehci1 { + status = "okay"; +}; + +&i2c0 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins_a>; + status = "okay"; + + axp209: pmic@34 { + compatible = "x-powers,axp209"; + reg = <0x34>; + interrupt-parent = <&nmi_intc>; + interrupts = <0 IRQ_TYPE_LEVEL_LOW>; + interrupt-controller; + #interrupt-cells = <1>; + }; +}; + +&i2c1 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_pins_a>; + status = "okay"; +}; + +&i2c2 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c2_pins_a>; + status = "okay"; +}; + +&mmc0 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>; + vmmc-supply = <®_vcc3v0>; + bus-width = <4>; + cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */ + cd-inverted; + status = "okay"; +}; + +&ohci0 { + status = "okay"; +}; + +&ohci1 { + status = "okay"; +}; + +®_usb1_vbus { + status = "okay"; +}; + +®_usb2_vbus { + status = "okay"; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pins_a>; + status = "okay"; +}; + +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&uart2_pins_a>; + status = "okay"; +}; + +&usbphy { + usb1_vbus-supply = <®_usb1_vbus>; + usb2_vbus-supply = <®_usb2_vbus>; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/sun7i-a20-olinuxino-lime.dts b/arch/arm/boot/dts/sun7i-a20-olinuxino-lime.dts index 12ded69d6..769726dfb 100644 --- a/arch/arm/boot/dts/sun7i-a20-olinuxino-lime.dts +++ b/arch/arm/boot/dts/sun7i-a20-olinuxino-lime.dts @@ -19,11 +19,6 @@ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * You should have received a copy of the GNU General Public - * License along with this file; if not, write to the Free - * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, - * MA 02110-1301 USA - * * Or, alternatively, * * b) Permission is hereby granted, free of charge, to any person @@ -60,118 +55,124 @@ model = "Olimex A20-OLinuXino-LIME"; compatible = "olimex,a20-olinuxino-lime", "allwinner,sun7i-a20"; - soc@01c00000 { - mmc0: mmc@01c0f000 { - pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>; - vmmc-supply = <®_vcc3v3>; - bus-width = <4>; - cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */ - cd-inverted; - status = "okay"; - }; + aliases { + serial0 = &uart0; + }; - usbphy: phy@01c13400 { - usb1_vbus-supply = <®_usb1_vbus>; - usb2_vbus-supply = <®_usb2_vbus>; - status = "okay"; - }; + chosen { + stdout-path = "serial0:115200n8"; + }; - ehci0: usb@01c14000 { - status = "okay"; - }; + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&led_pins_olinuxinolime>; - ohci0: usb@01c14400 { - status = "okay"; + green { + label = "a20-olinuxino-lime:green:usr"; + gpios = <&pio 7 2 GPIO_ACTIVE_HIGH>; + default-state = "on"; }; + }; +}; - ahci: sata@01c18000 { - target-supply = <®_ahci_5v>; - status = "okay"; - }; +&ahci { + target-supply = <®_ahci_5v>; + status = "okay"; +}; - ehci1: usb@01c1c000 { - status = "okay"; - }; +&ehci0 { + status = "okay"; +}; - ohci1: usb@01c1c400 { - status = "okay"; - }; +&ehci1 { + status = "okay"; +}; - pinctrl@01c20800 { - ahci_pwr_pin_olinuxinolime: ahci_pwr_pin@1 { - allwinner,pins = "PC3"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; - }; - - led_pins_olinuxinolime: led_pins@0 { - allwinner,pins = "PH2"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_20_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; - }; - }; +&gmac { + pinctrl-names = "default"; + pinctrl-0 = <&gmac_pins_mii_a>; + phy = <&phy1>; + phy-mode = "mii"; + status = "okay"; - uart0: serial@01c28000 { - pinctrl-names = "default"; - pinctrl-0 = <&uart0_pins_a>; - status = "okay"; - }; + phy1: ethernet-phy@1 { + reg = <1>; + }; +}; - i2c0: i2c@01c2ac00 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c0_pins_a>; - status = "okay"; +&i2c0 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins_a>; + status = "okay"; - axp209: pmic@34 { - compatible = "x-powers,axp209"; - reg = <0x34>; - interrupt-parent = <&nmi_intc>; - interrupts = <0 IRQ_TYPE_LEVEL_LOW>; + axp209: pmic@34 { + compatible = "x-powers,axp209"; + reg = <0x34>; + interrupt-parent = <&nmi_intc>; + interrupts = <0 IRQ_TYPE_LEVEL_LOW>; - interrupt-controller; - #interrupt-cells = <1>; - }; - }; + interrupt-controller; + #interrupt-cells = <1>; + }; +}; - gmac: ethernet@01c50000 { - pinctrl-names = "default"; - pinctrl-0 = <&gmac_pins_mii_a>; - phy = <&phy1>; - phy-mode = "mii"; - status = "okay"; +&mmc0 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>; + vmmc-supply = <®_vcc3v3>; + bus-width = <4>; + cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */ + cd-inverted; + status = "okay"; +}; - phy1: ethernet-phy@1 { - reg = <1>; - }; - }; - }; +&ohci0 { + status = "okay"; +}; - leds { - compatible = "gpio-leds"; - pinctrl-names = "default"; - pinctrl-0 = <&led_pins_olinuxinolime>; +&ohci1 { + status = "okay"; +}; - green { - label = "a20-olinuxino-lime:green:usr"; - gpios = <&pio 7 2 GPIO_ACTIVE_HIGH>; - default-state = "on"; - }; +&pio { + ahci_pwr_pin_olinuxinolime: ahci_pwr_pin@1 { + allwinner,pins = "PC3"; + allwinner,function = "gpio_out"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; - reg_ahci_5v: ahci-5v { - pinctrl-0 = <&ahci_pwr_pin_olinuxinolime>; - gpio = <&pio 2 3 GPIO_ACTIVE_HIGH>; - status = "okay"; + led_pins_olinuxinolime: led_pins@0 { + allwinner,pins = "PH2"; + allwinner,function = "gpio_out"; + allwinner,drive = <SUN4I_PINCTRL_20_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; +}; - reg_usb1_vbus: usb1-vbus { - status = "okay"; - }; +®_ahci_5v { + pinctrl-0 = <&ahci_pwr_pin_olinuxinolime>; + gpio = <&pio 2 3 GPIO_ACTIVE_HIGH>; + status = "okay"; +}; - reg_usb2_vbus: usb2-vbus { - status = "okay"; - }; +®_usb1_vbus { + status = "okay"; +}; + +®_usb2_vbus { + status = "okay"; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pins_a>; + status = "okay"; +}; + +&usbphy { + usb1_vbus-supply = <®_usb1_vbus>; + usb2_vbus-supply = <®_usb2_vbus>; + status = "okay"; }; diff --git a/arch/arm/boot/dts/sun7i-a20-olinuxino-lime2.dts b/arch/arm/boot/dts/sun7i-a20-olinuxino-lime2.dts index 260dbd3bf..8acff7827 100644 --- a/arch/arm/boot/dts/sun7i-a20-olinuxino-lime2.dts +++ b/arch/arm/boot/dts/sun7i-a20-olinuxino-lime2.dts @@ -16,11 +16,6 @@ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * You should have received a copy of the GNU General Public - * License along with this file; if not, write to the Free - * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, - * MA 02110-1301 USA - * * Or, alternatively, * * b) Permission is hereby granted, free of charge, to any person @@ -57,176 +52,182 @@ model = "Olimex A20-OLinuXino-LIME2"; compatible = "olimex,a20-olinuxino-lime2", "allwinner,sun7i-a20"; - soc@01c00000 { - mmc0: mmc@01c0f000 { - pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>; - vmmc-supply = <®_vcc3v3>; - bus-width = <4>; - cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */ - cd-inverted; - status = "okay"; - }; + aliases { + serial0 = &uart0; + }; - usbphy: phy@01c13400 { - usb1_vbus-supply = <®_usb1_vbus>; - usb2_vbus-supply = <®_usb2_vbus>; - status = "okay"; - }; + chosen { + stdout-path = "serial0:115200n8"; + }; - ehci0: usb@01c14000 { - status = "okay"; - }; + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&led_pins_olinuxinolime>; - ohci0: usb@01c14400 { - status = "okay"; + green { + label = "a20-olinuxino-lime2:green:usr"; + gpios = <&pio 7 2 GPIO_ACTIVE_HIGH>; + default-state = "on"; }; + }; - ahci: sata@01c18000 { - target-supply = <®_ahci_5v>; - status = "okay"; - }; + reg_axp_ipsout: axp_ipsout { + compatible = "regulator-fixed"; + regulator-name = "axp-ipsout"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + }; +}; - ehci1: usb@01c1c000 { - status = "okay"; - }; +&ahci { + target-supply = <®_ahci_5v>; + status = "okay"; +}; - ohci1: usb@01c1c400 { - status = "okay"; - }; +&ehci0 { + status = "okay"; +}; - pinctrl@01c20800 { - ahci_pwr_pin_olinuxinolime: ahci_pwr_pin@1 { - allwinner,pins = "PC3"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; - }; +&ehci1 { + status = "okay"; +}; + +&gmac { + pinctrl-names = "default"; + pinctrl-0 = <&gmac_pins_rgmii_a>; + phy = <&phy1>; + phy-mode = "rgmii"; + status = "okay"; - led_pins_olinuxinolime: led_pins@0 { - allwinner,pins = "PH2"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_20_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + phy1: ethernet-phy@1 { + reg = <1>; + }; +}; + +&i2c0 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins_a>; + status = "okay"; + + axp209: pmic@34 { + compatible = "x-powers,axp209"; + reg = <0x34>; + interrupt-parent = <&nmi_intc>; + interrupts = <0 IRQ_TYPE_LEVEL_LOW>; + + interrupt-controller; + #interrupt-cells = <1>; + + acin-supply = <®_axp_ipsout>; + vin2-supply = <®_axp_ipsout>; + vin3-supply = <®_axp_ipsout>; + ldo24in-supply = <®_axp_ipsout>; + ldo3in-supply = <®_axp_ipsout>; + + regulators { + vdd_rtc: ldo1 { + regulator-min-microvolt = <1300000>; + regulator-max-microvolt = <1300000>; + regulator-always-on; }; - }; - uart0: serial@01c28000 { - pinctrl-names = "default"; - pinctrl-0 = <&uart0_pins_a>; - status = "okay"; - }; + avcc: ldo2 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; - i2c0: i2c@01c2ac00 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c0_pins_a>; - status = "okay"; - - axp209: pmic@34 { - compatible = "x-powers,axp209"; - reg = <0x34>; - interrupt-parent = <&nmi_intc>; - interrupts = <0 IRQ_TYPE_LEVEL_LOW>; - - interrupt-controller; - #interrupt-cells = <1>; - - acin-supply = <®_axp_ipsout>; - vin2-supply = <®_axp_ipsout>; - vin3-supply = <®_axp_ipsout>; - ldo24in-supply = <®_axp_ipsout>; - ldo3in-supply = <®_axp_ipsout>; - - regulators { - vdd_rtc: ldo1 { - regulator-min-microvolt = <1300000>; - regulator-max-microvolt = <1300000>; - regulator-always-on; - }; - - avcc: ldo2 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - }; - - vcc_csi0: ldo3 { - regulator-min-microvolt = <700000>; - regulator-max-microvolt = <3500000>; - regulator-always-on; - }; - - vcc_csi1: ldo4 { - regulator-min-microvolt = <1250000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - }; - - vdd_cpu: dcdc2 { - regulator-min-microvolt = <700000>; - regulator-max-microvolt = <2275000>; - regulator-always-on; - }; - - vdd_int: dcdc3 { - regulator-min-microvolt = <700000>; - regulator-max-microvolt = <3500000>; - regulator-always-on; - }; - }; + vcc_csi0: ldo3 { + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <3500000>; + regulator-always-on; }; - }; - i2c1: i2c@01c2b000 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c1_pins_a>; - status = "okay"; - }; + vcc_csi1: ldo4 { + regulator-min-microvolt = <1250000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; - gmac: ethernet@01c50000 { - pinctrl-names = "default"; - pinctrl-0 = <&gmac_pins_rgmii_a>; - phy = <&phy1>; - phy-mode = "rgmii"; - status = "okay"; + vdd_cpu: dcdc2 { + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <2275000>; + regulator-always-on; + }; - phy1: ethernet-phy@1 { - reg = <1>; + vdd_int: dcdc3 { + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <3500000>; + regulator-always-on; }; }; }; +}; - leds { - compatible = "gpio-leds"; - pinctrl-names = "default"; - pinctrl-0 = <&led_pins_olinuxinolime>; +&i2c1 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_pins_a>; + status = "okay"; +}; - green { - label = "a20-olinuxino-lime2:green:usr"; - gpios = <&pio 7 2 GPIO_ACTIVE_HIGH>; - default-state = "on"; - }; - }; +&mmc0 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>; + vmmc-supply = <®_vcc3v3>; + bus-width = <4>; + cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */ + cd-inverted; + status = "okay"; +}; - reg_ahci_5v: ahci-5v { - pinctrl-0 = <&ahci_pwr_pin_olinuxinolime>; - gpio = <&pio 2 3 GPIO_ACTIVE_HIGH>; - status = "okay"; - }; +&ohci0 { + status = "okay"; +}; - reg_usb1_vbus: usb1-vbus { - status = "okay"; - }; +&ohci1 { + status = "okay"; +}; - reg_usb2_vbus: usb2-vbus { - status = "okay"; +&pio { + ahci_pwr_pin_olinuxinolime: ahci_pwr_pin@1 { + allwinner,pins = "PC3"; + allwinner,function = "gpio_out"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; - reg_axp_ipsout: axp_ipsout { - compatible = "regulator-fixed"; - regulator-name = "axp-ipsout"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - regulator-always-on; + led_pins_olinuxinolime: led_pins@0 { + allwinner,pins = "PH2"; + allwinner,function = "gpio_out"; + allwinner,drive = <SUN4I_PINCTRL_20_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; }; + +®_ahci_5v { + pinctrl-0 = <&ahci_pwr_pin_olinuxinolime>; + gpio = <&pio 2 3 GPIO_ACTIVE_HIGH>; + status = "okay"; +}; + +®_usb1_vbus { + status = "okay"; +}; + +®_usb2_vbus { + status = "okay"; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pins_a>; + status = "okay"; +}; + +&usbphy { + usb1_vbus-supply = <®_usb1_vbus>; + usb2_vbus-supply = <®_usb2_vbus>; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts b/arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts index 714e15ac5..00f8f25ec 100644 --- a/arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts +++ b/arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts @@ -3,12 +3,43 @@ * * Maxime Ripard <maxime.ripard@free-electrons.com> * - * The code contained herein is licensed under the GNU General Public - * License. You may obtain a copy of the GNU General Public License - * Version 2 or later at the following locations: + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. * - * http://www.opensource.org/licenses/gpl-license.html - * http://www.gnu.org/copyleft/gpl.html + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; @@ -32,216 +63,220 @@ spi1 = &spi2; }; - soc@01c00000 { - spi1: spi@01c06000 { - pinctrl-names = "default"; - pinctrl-0 = <&spi1_pins_a>; - status = "okay"; - }; - - mmc0: mmc@01c0f000 { - pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>; - vmmc-supply = <®_vcc3v3>; - bus-width = <4>; - cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */ - cd-inverted; - status = "okay"; - }; + chosen { + stdout-path = "serial0:115200n8"; + }; - mmc3: mmc@01c12000 { - pinctrl-names = "default"; - pinctrl-0 = <&mmc3_pins_a>, <&mmc3_cd_pin_olinuxinom>; - vmmc-supply = <®_vcc3v3>; - bus-width = <4>; - cd-gpios = <&pio 7 11 GPIO_ACTIVE_HIGH>; /* PH11 */ - cd-inverted; - status = "okay"; - }; + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&led_pins_olinuxino>; - usbphy: phy@01c13400 { - usb1_vbus-supply = <®_usb1_vbus>; - usb2_vbus-supply = <®_usb2_vbus>; - status = "okay"; + green { + label = "a20-olinuxino-micro:green:usr"; + gpios = <&pio 7 2 GPIO_ACTIVE_HIGH>; + default-state = "on"; }; + }; +}; - ehci0: usb@01c14000 { - status = "okay"; - }; +&ahci { + target-supply = <®_ahci_5v>; + status = "okay"; +}; - ohci0: usb@01c14400 { - status = "okay"; - }; +&ehci0 { + status = "okay"; +}; - spi2: spi@01c17000 { - pinctrl-names = "default"; - pinctrl-0 = <&spi2_pins_a>; - status = "okay"; - }; +&ehci1 { + status = "okay"; +}; - ahci: sata@01c18000 { - target-supply = <®_ahci_5v>; - status = "okay"; - }; +&gmac { + pinctrl-names = "default"; + pinctrl-0 = <&gmac_pins_mii_a>; + phy = <&phy1>; + phy-mode = "mii"; + status = "okay"; - ehci1: usb@01c1c000 { - status = "okay"; - }; + phy1: ethernet-phy@1 { + reg = <1>; + }; +}; - ohci1: usb@01c1c400 { - status = "okay"; - }; +&i2c0 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins_a>; + status = "okay"; - pinctrl@01c20800 { - mmc3_cd_pin_olinuxinom: mmc3_cd_pin@0 { - allwinner,pins = "PH11"; - allwinner,function = "gpio_in"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; - }; - - led_pins_olinuxino: led_pins@0 { - allwinner,pins = "PH2"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_20_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; - }; - }; + axp209: pmic@34 { + compatible = "x-powers,axp209"; + reg = <0x34>; + interrupt-parent = <&nmi_intc>; + interrupts = <0 IRQ_TYPE_LEVEL_LOW>; - lradc: lradc@01c22800 { - vref-supply = <®_vcc3v0>; - status = "okay"; - - button@191 { - label = "Volume Up"; - linux,code = <KEY_VOLUMEUP>; - channel = <0>; - voltage = <191274>; - }; - - button@392 { - label = "Volume Down"; - linux,code = <KEY_VOLUMEDOWN>; - channel = <0>; - voltage = <392644>; - }; - - button@601 { - label = "Menu"; - linux,code = <KEY_MENU>; - channel = <0>; - voltage = <601151>; - }; - - button@795 { - label = "Search"; - linux,code = <KEY_SEARCH>; - channel = <0>; - voltage = <795090>; - }; - - button@987 { - label = "Home"; - linux,code = <KEY_HOMEPAGE>; - channel = <0>; - voltage = <987387>; - }; - - button@1184 { - label = "Esc"; - linux,code = <KEY_ESC>; - channel = <0>; - voltage = <1184678>; - }; - - button@1398 { - label = "Enter"; - linux,code = <KEY_ENTER>; - channel = <0>; - voltage = <1398804>; - }; - }; + interrupt-controller; + #interrupt-cells = <1>; + }; +}; - uart0: serial@01c28000 { - pinctrl-names = "default"; - pinctrl-0 = <&uart0_pins_a>; - status = "okay"; - }; +&i2c1 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_pins_a>; + status = "okay"; +}; - uart6: serial@01c29800 { - pinctrl-names = "default"; - pinctrl-0 = <&uart6_pins_a>; - status = "okay"; - }; +&i2c2 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c2_pins_a>; + status = "okay"; +}; - uart7: serial@01c29c00 { - pinctrl-names = "default"; - pinctrl-0 = <&uart7_pins_a>; - status = "okay"; - }; +&lradc { + vref-supply = <®_vcc3v0>; + status = "okay"; - i2c0: i2c@01c2ac00 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c0_pins_a>; - status = "okay"; + button@191 { + label = "Volume Up"; + linux,code = <KEY_VOLUMEUP>; + channel = <0>; + voltage = <191274>; + }; - axp209: pmic@34 { - compatible = "x-powers,axp209"; - reg = <0x34>; - interrupt-parent = <&nmi_intc>; - interrupts = <0 IRQ_TYPE_LEVEL_LOW>; + button@392 { + label = "Volume Down"; + linux,code = <KEY_VOLUMEDOWN>; + channel = <0>; + voltage = <392644>; + }; - interrupt-controller; - #interrupt-cells = <1>; - }; - }; + button@601 { + label = "Menu"; + linux,code = <KEY_MENU>; + channel = <0>; + voltage = <601151>; + }; - i2c1: i2c@01c2b000 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c1_pins_a>; - status = "okay"; - }; + button@795 { + label = "Search"; + linux,code = <KEY_SEARCH>; + channel = <0>; + voltage = <795090>; + }; - i2c2: i2c@01c2b400 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c2_pins_a>; - status = "okay"; - }; + button@987 { + label = "Home"; + linux,code = <KEY_HOMEPAGE>; + channel = <0>; + voltage = <987387>; + }; - gmac: ethernet@01c50000 { - pinctrl-names = "default"; - pinctrl-0 = <&gmac_pins_mii_a>; - phy = <&phy1>; - phy-mode = "mii"; - status = "okay"; + button@1184 { + label = "Esc"; + linux,code = <KEY_ESC>; + channel = <0>; + voltage = <1184678>; + }; - phy1: ethernet-phy@1 { - reg = <1>; - }; - }; + button@1398 { + label = "Enter"; + linux,code = <KEY_ENTER>; + channel = <0>; + voltage = <1398804>; }; +}; - leds { - compatible = "gpio-leds"; - pinctrl-names = "default"; - pinctrl-0 = <&led_pins_olinuxino>; +&mmc0 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>; + vmmc-supply = <®_vcc3v3>; + bus-width = <4>; + cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */ + cd-inverted; + status = "okay"; +}; - green { - label = "a20-olinuxino-micro:green:usr"; - gpios = <&pio 7 2 GPIO_ACTIVE_HIGH>; - default-state = "on"; - }; - }; +&mmc3 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc3_pins_a>, <&mmc3_cd_pin_olinuxinom>; + vmmc-supply = <®_vcc3v3>; + bus-width = <4>; + cd-gpios = <&pio 7 11 GPIO_ACTIVE_HIGH>; /* PH11 */ + cd-inverted; + status = "okay"; +}; - reg_ahci_5v: ahci-5v { - status = "okay"; - }; +&ohci0 { + status = "okay"; +}; + +&ohci1 { + status = "okay"; +}; - reg_usb1_vbus: usb1-vbus { - status = "okay"; +&pio { + mmc3_cd_pin_olinuxinom: mmc3_cd_pin@0 { + allwinner,pins = "PH11"; + allwinner,function = "gpio_in"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; }; - reg_usb2_vbus: usb2-vbus { - status = "okay"; + led_pins_olinuxino: led_pins@0 { + allwinner,pins = "PH2"; + allwinner,function = "gpio_out"; + allwinner,drive = <SUN4I_PINCTRL_20_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; }; + +®_ahci_5v { + status = "okay"; +}; + +®_usb1_vbus { + status = "okay"; +}; + +®_usb2_vbus { + status = "okay"; +}; + +&spi1 { + pinctrl-names = "default"; + pinctrl-0 = <&spi1_pins_a>, + <&spi1_cs0_pins_a>; + status = "okay"; +}; + +&spi2 { + pinctrl-names = "default"; + pinctrl-0 = <&spi2_pins_a>, + <&spi2_cs0_pins_a>; + status = "okay"; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pins_a>; + status = "okay"; +}; + +&uart6 { + pinctrl-names = "default"; + pinctrl-0 = <&uart6_pins_a>; + status = "okay"; +}; + +&uart7 { + pinctrl-names = "default"; + pinctrl-0 = <&uart7_pins_a>; + status = "okay"; +}; + +&usbphy { + usb1_vbus-supply = <®_usb1_vbus>; + usb2_vbus-supply = <®_usb2_vbus>; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/sun7i-a20-orangepi-mini.dts b/arch/arm/boot/dts/sun7i-a20-orangepi-mini.dts new file mode 100644 index 000000000..73cd81ee0 --- /dev/null +++ b/arch/arm/boot/dts/sun7i-a20-orangepi-mini.dts @@ -0,0 +1,250 @@ +/* + * Copyright 2015 Hans de Goede <hdegoede@redhat.com> + * + * Hans de Goede <hdegoede@redhat.com> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; +#include "sun7i-a20.dtsi" +#include "sunxi-common-regulators.dtsi" + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/pinctrl/sun4i-a10.h> + +/ { + model = "Orange Pi Mini"; + compatible = "xunlong,orangepi-mini", "allwinner,sun7i-a20"; + + aliases { + serial0 = &uart0; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&led_pins_orangepi>; + + green { + label = "orangepi:green:usr"; + gpios = <&pio 7 24 GPIO_ACTIVE_HIGH>; /* PH24 */ + }; + + blue { + label = "orangepi:blue:usr"; + gpios = <&pio 7 25 GPIO_ACTIVE_HIGH>; /* PH25 */ + }; + }; + + reg_gmac_3v3: gmac-3v3 { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&gmac_power_pin_orangepi>; + regulator-name = "gmac-3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + startup-delay-us = <100000>; + enable-active-high; + gpio = <&pio 7 23 GPIO_ACTIVE_HIGH>; /* PH23 */ + }; +}; + +&ahci { + status = "okay"; +}; + +&ehci0 { + status = "okay"; +}; + +&ehci1 { + status = "okay"; +}; + +&gmac { + pinctrl-names = "default"; + pinctrl-0 = <&gmac_pins_rgmii_a>; + phy = <&phy1>; + phy-mode = "rgmii"; + phy-supply = <®_gmac_3v3>; + status = "okay"; + + phy1: ethernet-phy@1 { + reg = <1>; + }; +}; + +&i2c0 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins_a>; + status = "okay"; + + axp209: pmic@34 { + reg = <0x34>; + interrupt-parent = <&nmi_intc>; + interrupts = <0 IRQ_TYPE_LEVEL_LOW>; + }; +}; + +#include "axp209.dtsi" + +&ir0 { + pinctrl-names = "default"; + pinctrl-0 = <&ir0_rx_pins_a>; + status = "okay"; +}; + +&mmc0 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_orangepi>; + vmmc-supply = <®_vcc3v3>; + bus-width = <4>; + cd-gpios = <&pio 7 10 GPIO_ACTIVE_HIGH>; /* PH10 */ + cd-inverted; + status = "okay"; +}; + +&mmc3 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc3_pins_a>, <&mmc3_cd_pin_orangepi>; + vmmc-supply = <®_vcc3v3>; + bus-width = <4>; + cd-gpios = <&pio 7 11 GPIO_ACTIVE_HIGH>; /* PH11 */ + cd-inverted; + status = "okay"; +}; + +&pio { + mmc0_cd_pin_orangepi: mmc0_cd_pin@0 { + allwinner,pins = "PH10"; + allwinner,function = "gpio_in"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; + }; + + mmc3_cd_pin_orangepi: mmc3_cd_pin@0 { + allwinner,pins = "PH11"; + allwinner,function = "gpio_in"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; + }; + + usb2_vbus_pin_bananapro: usb2_vbus_pin@0 { + allwinner,pins = "PH22"; + allwinner,function = "gpio_out"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + }; + + gmac_power_pin_orangepi: gmac_power_pin@0 { + allwinner,pins = "PH23"; + allwinner,function = "gpio_out"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + }; + + led_pins_orangepi: led_pins@0 { + allwinner,pins = "PH24", "PH25"; + allwinner,function = "gpio_out"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + }; + + usb1_vbus_pin_bananapro: usb1_vbus_pin@0 { + allwinner,pins = "PH26"; + allwinner,function = "gpio_out"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + }; +}; + +®_dcdc2 { + regulator-always-on; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1500000>; + regulator-name = "vdd-cpu"; +}; + +®_dcdc3 { + regulator-always-on; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1400000>; + regulator-name = "vdd-int-pll"; +}; + +®_ldo1 { + regulator-name = "vdd-rtc"; +}; + +®_ldo2 { + regulator-always-on; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-name = "avcc"; +}; + +®_usb1_vbus { + pinctrl-0 = <&usb1_vbus_pin_bananapro>; + gpio = <&pio 7 26 GPIO_ACTIVE_HIGH>; /* PH26 */ + status = "okay"; +}; + +®_usb2_vbus { + pinctrl-0 = <&usb2_vbus_pin_bananapro>; + gpio = <&pio 7 22 GPIO_ACTIVE_HIGH>; /* PH22 */ + status = "okay"; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pins_a>; + status = "okay"; +}; + +&usbphy { + usb1_vbus-supply = <®_usb1_vbus>; + usb2_vbus-supply = <®_usb2_vbus>; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/sun7i-a20-orangepi.dts b/arch/arm/boot/dts/sun7i-a20-orangepi.dts new file mode 100644 index 000000000..55a06ceb8 --- /dev/null +++ b/arch/arm/boot/dts/sun7i-a20-orangepi.dts @@ -0,0 +1,228 @@ +/* + * Copyright 2015 Hans de Goede <hdegoede@redhat.com> + * + * Hans de Goede <hdegoede@redhat.com> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; +#include "sun7i-a20.dtsi" +#include "sunxi-common-regulators.dtsi" + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/pinctrl/sun4i-a10.h> + +/ { + model = "Orange Pi"; + compatible = "xunlong,orangepi", "allwinner,sun7i-a20"; + + aliases { + serial0 = &uart0; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&led_pins_orangepi>; + + green { + label = "orangepi:green:usr"; + gpios = <&pio 7 24 GPIO_ACTIVE_HIGH>; /* PH24 */ + }; + }; + + reg_gmac_3v3: gmac-3v3 { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&gmac_power_pin_orangepi>; + regulator-name = "gmac-3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + startup-delay-us = <100000>; + enable-active-high; + gpio = <&pio 7 23 GPIO_ACTIVE_HIGH>; /* PH23 */ + }; +}; + +&ahci { + status = "okay"; +}; + +&ehci0 { + status = "okay"; +}; + +&ehci1 { + status = "okay"; +}; + +&gmac { + pinctrl-names = "default"; + pinctrl-0 = <&gmac_pins_rgmii_a>; + phy = <&phy1>; + phy-mode = "rgmii"; + phy-supply = <®_gmac_3v3>; + status = "okay"; + + phy1: ethernet-phy@1 { + reg = <1>; + }; +}; + +&i2c0 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins_a>; + status = "okay"; + + axp209: pmic@34 { + reg = <0x34>; + interrupt-parent = <&nmi_intc>; + interrupts = <0 IRQ_TYPE_LEVEL_LOW>; + }; +}; + +#include "axp209.dtsi" + +&ir0 { + pinctrl-names = "default"; + pinctrl-0 = <&ir0_rx_pins_a>; + status = "okay"; +}; + +&mmc0 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_orangepi>; + vmmc-supply = <®_vcc3v3>; + bus-width = <4>; + cd-gpios = <&pio 7 10 GPIO_ACTIVE_HIGH>; /* PH10 */ + cd-inverted; + status = "okay"; +}; + +&pio { + mmc0_cd_pin_orangepi: mmc0_cd_pin@0 { + allwinner,pins = "PH10"; + allwinner,function = "gpio_in"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; + }; + + usb2_vbus_pin_bananapro: usb2_vbus_pin@0 { + allwinner,pins = "PH22"; + allwinner,function = "gpio_out"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + }; + + gmac_power_pin_orangepi: gmac_power_pin@0 { + allwinner,pins = "PH23"; + allwinner,function = "gpio_out"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + }; + + led_pins_orangepi: led_pins@0 { + allwinner,pins = "PH24"; + allwinner,function = "gpio_out"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + }; + + usb1_vbus_pin_bananapro: usb1_vbus_pin@0 { + allwinner,pins = "PH26"; + allwinner,function = "gpio_out"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + }; +}; + +®_dcdc2 { + regulator-always-on; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1500000>; + regulator-name = "vdd-cpu"; +}; + +®_dcdc3 { + regulator-always-on; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1400000>; + regulator-name = "vdd-int-pll"; +}; + +®_ldo1 { + regulator-name = "vdd-rtc"; +}; + +®_ldo2 { + regulator-always-on; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-name = "avcc"; +}; + +®_usb1_vbus { + pinctrl-0 = <&usb1_vbus_pin_bananapro>; + gpio = <&pio 7 26 GPIO_ACTIVE_HIGH>; /* PH26 */ + status = "okay"; +}; + +®_usb2_vbus { + pinctrl-0 = <&usb2_vbus_pin_bananapro>; + gpio = <&pio 7 22 GPIO_ACTIVE_HIGH>; /* PH22 */ + status = "okay"; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pins_a>; + status = "okay"; +}; + +&usbphy { + usb1_vbus-supply = <®_usb1_vbus>; + usb2_vbus-supply = <®_usb2_vbus>; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/sun7i-a20-pcduino3-nano.dts b/arch/arm/boot/dts/sun7i-a20-pcduino3-nano.dts new file mode 100644 index 000000000..5361fce26 --- /dev/null +++ b/arch/arm/boot/dts/sun7i-a20-pcduino3-nano.dts @@ -0,0 +1,194 @@ +/* + * Copyright 2015 Adam Sampson <ats@offog.org> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; +#include "sun7i-a20.dtsi" +#include "sunxi-common-regulators.dtsi" +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/interrupt-controller/arm-gic.h> + +/ { + model = "LinkSprite pcDuino3 Nano"; + compatible = "linksprite,pcduino3-nano", "allwinner,sun7i-a20"; + + aliases { + serial0 = &uart0; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&led_pins_pcduino3_nano>; + + /* Marked "LED3" on the PCB. */ + usr1 { + label = "pcduino3-nano:green:usr1"; + gpios = <&pio 7 16 GPIO_ACTIVE_LOW>; /* PH16 */ + }; + + /* Marked "LED4" on the PCB. */ + usr2 { + label = "pcduino3-nano:green:usr2"; + gpios = <&pio 7 15 GPIO_ACTIVE_LOW>; /* PH15 */ + }; + }; +}; + +&ahci { + target-supply = <®_ahci_5v>; + status = "okay"; +}; + +&ehci0 { + status = "okay"; +}; + +&ehci1 { + status = "okay"; +}; + +&gmac { + pinctrl-names = "default"; + pinctrl-0 = <&gmac_pins_rgmii_a>; + phy = <&phy1>; + phy-mode = "rgmii"; + status = "okay"; + + phy1: ethernet-phy@1 { + reg = <1>; + }; +}; + +&i2c0 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins_a>; + status = "okay"; + + axp209: pmic@34 { + compatible = "x-powers,axp209"; + reg = <0x34>; + interrupt-parent = <&nmi_intc>; + interrupts = <0 IRQ_TYPE_LEVEL_LOW>; + + interrupt-controller; + #interrupt-cells = <1>; + }; +}; + +&ir0 { + pinctrl-names = "default"; + pinctrl-0 = <&ir0_rx_pins_a>; + status = "okay"; +}; + +&mmc0 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>; + vmmc-supply = <®_vcc3v3>; + bus-width = <4>; + cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */ + cd-inverted; + status = "okay"; +}; + +&ohci0 { + status = "okay"; +}; + +&ohci1 { + status = "okay"; +}; + +&pio { + ahci_pwr_pin_pcduino3_nano: ahci_pwr_pin@0 { + allwinner,pins = "PH2"; + allwinner,function = "gpio_out"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + }; + + led_pins_pcduino3_nano: led_pins@0 { + allwinner,pins = "PH16", "PH15"; + allwinner,function = "gpio_out"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + }; + + usb1_vbus_pin_pcduino3_nano: usb1_vbus_pin@0 { + allwinner,pins = "PH11"; + allwinner,function = "gpio_out"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + }; +}; + +®_ahci_5v { + pinctrl-0 = <&ahci_pwr_pin_pcduino3_nano>; + gpio = <&pio 7 2 GPIO_ACTIVE_HIGH>; /* PH2 */ + status = "okay"; +}; + +®_usb1_vbus { + pinctrl-0 = <&usb1_vbus_pin_pcduino3_nano>; + gpio = <&pio 7 11 GPIO_ACTIVE_HIGH>; /* PH11 */ + status = "okay"; +}; + +®_usb2_vbus { + status = "okay"; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pins_a>; + status = "okay"; +}; + +&usbphy { + usb1_vbus-supply = <®_usb1_vbus>; + usb2_vbus-supply = <®_usb2_vbus>; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/sun7i-a20-pcduino3.dts b/arch/arm/boot/dts/sun7i-a20-pcduino3.dts index 0a2c2aeb4..afc9ecebe 100644 --- a/arch/arm/boot/dts/sun7i-a20-pcduino3.dts +++ b/arch/arm/boot/dts/sun7i-a20-pcduino3.dts @@ -17,11 +17,6 @@ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * You should have received a copy of the GNU General Public - * License along with this file; if not, write to the Free - * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, - * MA 02110-1301 USA - * * Or, alternatively, * * b) Permission is hereby granted, free of charge, to any person @@ -59,103 +54,12 @@ model = "LinkSprite pcDuino3"; compatible = "linksprite,pcduino3", "allwinner,sun7i-a20"; - soc@01c00000 { - mmc0: mmc@01c0f000 { - pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>; - vmmc-supply = <®_vcc3v3>; - bus-width = <4>; - cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */ - cd-inverted; - status = "okay"; - }; - - usbphy: phy@01c13400 { - usb1_vbus-supply = <®_usb1_vbus>; - usb2_vbus-supply = <®_usb2_vbus>; - status = "okay"; - }; - - ehci0: usb@01c14000 { - status = "okay"; - }; - - ohci0: usb@01c14400 { - status = "okay"; - }; - - ahci: sata@01c18000 { - target-supply = <®_ahci_5v>; - status = "okay"; - }; - - ehci1: usb@01c1c000 { - status = "okay"; - }; - - ohci1: usb@01c1c400 { - status = "okay"; - }; - - pinctrl@01c20800 { - ahci_pwr_pin_a: ahci_pwr_pin@0 { - allwinner,pins = "PH2"; - }; - - led_pins_pcduino3: led_pins@0 { - allwinner,pins = "PH15", "PH16"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; - }; - - key_pins_pcduino3: key_pins@0 { - allwinner,pins = "PH17", "PH18", "PH19"; - allwinner,function = "gpio_in"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; - }; - }; - - ir0: ir@01c21800 { - pinctrl-names = "default"; - pinctrl-0 = <&ir0_pins_a>; - status = "okay"; - }; - - uart0: serial@01c28000 { - pinctrl-names = "default"; - pinctrl-0 = <&uart0_pins_a>; - status = "okay"; - }; - - i2c0: i2c@01c2ac00 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c0_pins_a>; - status = "okay"; - - axp209: pmic@34 { - compatible = "x-powers,axp209"; - reg = <0x34>; - interrupt-parent = <&nmi_intc>; - interrupts = <0 IRQ_TYPE_LEVEL_LOW>; - - interrupt-controller; - #interrupt-cells = <1>; - }; - }; - - gmac: ethernet@01c50000 { - pinctrl-names = "default"; - pinctrl-0 = <&gmac_pins_mii_a>; - phy = <&phy1>; - phy-mode = "mii"; - status = "okay"; + aliases { + serial0 = &uart0; + }; - phy1: ethernet-phy@1 { - reg = <1>; - }; - }; + chosen { + stdout-path = "serial0:115200n8"; }; leds { @@ -196,17 +100,114 @@ gpios = <&pio 7 19 GPIO_ACTIVE_LOW>; }; }; +}; - reg_usb1_vbus: usb1-vbus { - status = "okay"; +&ahci { + target-supply = <®_ahci_5v>; + status = "okay"; +}; + +&ahci_pwr_pin_a { + allwinner,pins = "PH2"; +}; + +&ehci0 { + status = "okay"; +}; + +&ehci1 { + status = "okay"; +}; + +&gmac { + pinctrl-names = "default"; + pinctrl-0 = <&gmac_pins_mii_a>; + phy = <&phy1>; + phy-mode = "mii"; + status = "okay"; + + phy1: ethernet-phy@1 { + reg = <1>; }; +}; + +&i2c0 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins_a>; + status = "okay"; + + axp209: pmic@34 { + compatible = "x-powers,axp209"; + reg = <0x34>; + interrupt-parent = <&nmi_intc>; + interrupts = <0 IRQ_TYPE_LEVEL_LOW>; + + interrupt-controller; + #interrupt-cells = <1>; + }; +}; + +&ir0 { + pinctrl-names = "default"; + pinctrl-0 = <&ir0_rx_pins_a>; + status = "okay"; +}; + +&mmc0 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>; + vmmc-supply = <®_vcc3v3>; + bus-width = <4>; + cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */ + cd-inverted; + status = "okay"; +}; + +&ohci0 { + status = "okay"; +}; + +&ohci1 { + status = "okay"; +}; - reg_usb2_vbus: usb2-vbus { - status = "okay"; +&pio { + led_pins_pcduino3: led_pins@0 { + allwinner,pins = "PH15", "PH16"; + allwinner,function = "gpio_out"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; - reg_ahci_5v: ahci-5v { - gpio = <&pio 7 2 GPIO_ACTIVE_HIGH>; - status = "okay"; + key_pins_pcduino3: key_pins@0 { + allwinner,pins = "PH17", "PH18", "PH19"; + allwinner,function = "gpio_in"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; }; + +®_ahci_5v { + gpio = <&pio 7 2 GPIO_ACTIVE_HIGH>; + status = "okay"; +}; + +®_usb1_vbus { + status = "okay"; +}; + +®_usb2_vbus { + status = "okay"; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pins_a>; + status = "okay"; +}; + +&usbphy { + usb1_vbus-supply = <®_usb1_vbus>; + usb2_vbus-supply = <®_usb2_vbus>; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/sun7i-a20-wexler-tab7200.dts b/arch/arm/boot/dts/sun7i-a20-wexler-tab7200.dts new file mode 100644 index 000000000..83c6d3f87 --- /dev/null +++ b/arch/arm/boot/dts/sun7i-a20-wexler-tab7200.dts @@ -0,0 +1,183 @@ +/* + * Copyright 2015 Aleksei Mamlin + * Aleksei Mamlin <mamlinav@gmail.com> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; +#include "sun7i-a20.dtsi" +#include "sunxi-common-regulators.dtsi" + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> +#include <dt-bindings/interrupt-controller/irq.h> + +/ { + model = "Wexler TAB7200"; + compatible = "wexler,tab7200", "allwinner,sun7i-a20"; + + aliases { + serial0 = &uart0; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; +}; + +&cpu0 { + cpu-supply = <®_dcdc2>; +}; + +&ehci0 { + status = "okay"; +}; + +&ehci1 { + status = "okay"; +}; + +&i2c0 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins_a>; + status = "okay"; + + axp209: pmic@34 { + reg = <0x34>; + interrupt-parent = <&nmi_intc>; + interrupts = <0 IRQ_TYPE_LEVEL_LOW>; + }; +}; + +&i2c1 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_pins_a>; + status = "okay"; +}; + +&i2c2 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c2_pins_a>; + status = "okay"; +}; + +&lradc { + vref-supply = <®_vcc3v0>; + status = "okay"; + + button@571 { + label = "Volume Up"; + linux,code = <KEY_VOLUMEUP>; + channel = <0>; + voltage = <571428>; + }; + + button@761 { + label = "Volume Down"; + linux,code = <KEY_VOLUMEDOWN>; + channel = <0>; + voltage = <761904>; + }; +}; + +&mmc0 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>; + vmmc-supply = <®_vcc3v3>; + bus-width = <4>; + cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */ + cd-inverted; + status = "okay"; +}; + +&ohci0 { + status = "okay"; +}; + +&ohci1 { + status = "okay"; +}; + +#include "axp209.dtsi" + +®_dcdc2 { + regulator-always-on; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1450000>; + regulator-name = "vdd-cpu"; +}; + +®_dcdc3 { + regulator-always-on; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1400000>; + regulator-name = "vdd-int-dll"; +}; + +®_ldo1 { + regulator-name = "vdd-rtc"; +}; + +®_ldo2 { + regulator-always-on; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-name = "avcc"; +}; + +®_usb1_vbus { + status = "okay"; +}; + +®_usb2_vbus { + status = "okay"; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pins_a>; + status = "okay"; +}; + +&usbphy { + usb1_vbus-supply = <®_usb1_vbus>; + usb2_vbus-supply = <®_usb2_vbus>; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/sun7i-a20.dtsi b/arch/arm/boot/dts/sun7i-a20.dtsi index 2b4847c7c..6a63f30c9 100644 --- a/arch/arm/boot/dts/sun7i-a20.dtsi +++ b/arch/arm/boot/dts/sun7i-a20.dtsi @@ -18,11 +18,6 @@ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * You should have received a copy of the GNU General Public - * License along with this file; if not, write to the Free - * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, - * MA 02110-1301 USA - * * Or, alternatively, * * b) Permission is hereby granted, free of charge, to any person @@ -68,7 +63,8 @@ ranges; framebuffer@0 { - compatible = "allwinner,simple-framebuffer", "simple-framebuffer"; + compatible = "allwinner,simple-framebuffer", + "simple-framebuffer"; allwinner,pipeline = "de_be0-lcd0-hdmi"; clocks = <&pll5 1>, <&ahb_gates 36>, <&ahb_gates 43>, <&ahb_gates 44>; @@ -104,14 +100,14 @@ clocks = <&cpu>; clock-latency = <244144>; /* 8 32k periods */ operating-points = < - /* kHz uV */ - 960000 1400000 - 912000 1400000 - 864000 1300000 - 720000 1200000 - 528000 1100000 - 312000 1000000 - 144000 900000 + /* kHz uV */ + 960000 1400000 + 912000 1400000 + 864000 1300000 + 720000 1200000 + 528000 1100000 + 312000 1000000 + 144000 900000 >; #cooling-cells = <2>; cooling-min-level = <0>; @@ -224,7 +220,8 @@ compatible = "allwinner,sun4i-a10-pll6-clk"; reg = <0x01c20028 0x4>; clocks = <&osc24M>; - clock-output-names = "pll6_sata", "pll6_other", "pll6"; + clock-output-names = "pll6_sata", "pll6_other", "pll6", + "pll6_div_4"; }; pll8: clk@01c20040 { @@ -253,10 +250,16 @@ ahb: ahb@01c20054 { #clock-cells = <0>; - compatible = "allwinner,sun4i-a10-ahb-clk"; + compatible = "allwinner,sun5i-a13-ahb-clk"; reg = <0x01c20054 0x4>; - clocks = <&axi>; + clocks = <&axi>, <&pll6 3>, <&pll6 1>; clock-output-names = "ahb"; + /* + * Use PLL6 as parent, instead of CPU/AXI + * which has rate changes due to cpufreq + */ + assigned-clocks = <&ahb>; + assigned-clock-parents = <&pll6 3>; }; ahb_gates: clk@01c20060 { @@ -441,11 +444,12 @@ usb_clk: clk@01c200cc { #clock-cells = <1>; - #reset-cells = <1>; + #reset-cells = <1>; compatible = "allwinner,sun4i-a10-usb-clk"; reg = <0x01c200cc 0x4>; clocks = <&pll6 1>; - clock-output-names = "usb_ohci0", "usb_ohci1", "usb_phy"; + clock-output-names = "usb_ohci0", "usb_ohci1", + "usb_phy"; }; spi3_clk: clk@01c200d4 { @@ -465,10 +469,13 @@ }; /* - * The following two are dummy clocks, placeholders used in the gmac_tx - * clock. The gmac driver will choose one parent depending on the PHY - * interface mode, using clk_set_rate auto-reparenting. - * The actual TX clock rate is not controlled by the gmac_tx clock. + * The following two are dummy clocks, placeholders + * used in the gmac_tx clock. The gmac driver will + * choose one parent depending on the PHY interface + * mode, using clk_set_rate auto-reparenting. + * + * The actual TX clock rate is not controlled by the + * gmac_tx clock. */ mii_phy_tx_clk: clk@2 { #clock-cells = <0>; @@ -527,6 +534,42 @@ #size-cells = <1>; ranges; + sram-controller@01c00000 { + compatible = "allwinner,sun4i-a10-sram-controller"; + reg = <0x01c00000 0x30>; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + sram_a: sram@00000000 { + compatible = "mmio-sram"; + reg = <0x00000000 0xc000>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x00000000 0xc000>; + + emac_sram: sram-section@8000 { + compatible = "allwinner,sun4i-a10-sram-a3-a4"; + reg = <0x8000 0x4000>; + status = "disabled"; + }; + }; + + sram_d: sram@00010000 { + compatible = "mmio-sram"; + reg = <0x00010000 0x1000>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x00010000 0x1000>; + + otg_sram: sram-section@0000 { + compatible = "allwinner,sun4i-a10-sram-d"; + reg = <0x0000 0x1000>; + status = "disabled"; + }; + }; + }; + nmi_intc: interrupt-controller@01c00030 { compatible = "allwinner,sun7i-a20-sc-nmi"; interrupt-controller; @@ -576,6 +619,7 @@ reg = <0x01c0b000 0x1000>; interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>; clocks = <&ahb_gates 17>; + allwinner,sram = <&emac_sram 1>; status = "disabled"; }; @@ -600,6 +644,8 @@ "sample"; interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>; status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; }; mmc1: mmc@01c10000 { @@ -615,6 +661,8 @@ "sample"; interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>; status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; }; mmc2: mmc@01c11000 { @@ -630,6 +678,8 @@ "sample"; interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>; status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; }; mmc3: mmc@01c12000 { @@ -645,6 +695,8 @@ "sample"; interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>; status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; }; usbphy: phy@01c13400 { @@ -795,6 +847,13 @@ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; + uart4_pins_b: uart4@1 { + allwinner,pins = "PH4", "PH5"; + allwinner,function = "uart4"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + }; + uart5_pins_a: uart5@0 { allwinner,pins = "PI10", "PI11"; allwinner,function = "uart5"; @@ -896,35 +955,71 @@ }; spi0_pins_a: spi0@0 { - allwinner,pins = "PI10", "PI11", "PI12", "PI13", "PI14"; + allwinner,pins = "PI11", "PI12", "PI13"; + allwinner,function = "spi0"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + }; + + spi0_cs0_pins_a: spi0_cs0@0 { + allwinner,pins = "PI10"; + allwinner,function = "spi0"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + }; + + spi0_cs1_pins_a: spi0_cs1@0 { + allwinner,pins = "PI14"; allwinner,function = "spi0"; allwinner,drive = <SUN4I_PINCTRL_10_MA>; allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; spi1_pins_a: spi1@0 { - allwinner,pins = "PI16", "PI17", "PI18", "PI19"; + allwinner,pins = "PI17", "PI18", "PI19"; + allwinner,function = "spi1"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + }; + + spi1_cs0_pins_a: spi1_cs0@0 { + allwinner,pins = "PI16"; allwinner,function = "spi1"; allwinner,drive = <SUN4I_PINCTRL_10_MA>; allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; spi2_pins_a: spi2@0 { - allwinner,pins = "PC19", "PC20", "PC21", "PC22"; + allwinner,pins = "PC20", "PC21", "PC22"; allwinner,function = "spi2"; allwinner,drive = <SUN4I_PINCTRL_10_MA>; allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; spi2_pins_b: spi2@1 { - allwinner,pins = "PB14", "PB15", "PB16", "PB17"; + allwinner,pins = "PB15", "PB16", "PB17"; + allwinner,function = "spi2"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + }; + + spi2_cs0_pins_a: spi2_cs0@0 { + allwinner,pins = "PC19"; + allwinner,function = "spi2"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + }; + + spi2_cs0_pins_b: spi2_cs0@1 { + allwinner,pins = "PB14"; allwinner,function = "spi2"; allwinner,drive = <SUN4I_PINCTRL_10_MA>; allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; mmc0_pins_a: mmc0@0 { - allwinner,pins = "PF0","PF1","PF2","PF3","PF4","PF5"; + allwinner,pins = "PF0", "PF1", "PF2", + "PF3", "PF4", "PF5"; allwinner,function = "mmc0"; allwinner,drive = <SUN4I_PINCTRL_30_MA>; allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; @@ -938,28 +1033,44 @@ }; mmc2_pins_a: mmc2@0 { - allwinner,pins = "PC6","PC7","PC8","PC9","PC10","PC11"; + allwinner,pins = "PC6", "PC7", "PC8", + "PC9", "PC10", "PC11"; allwinner,function = "mmc2"; allwinner,drive = <SUN4I_PINCTRL_30_MA>; allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; }; mmc3_pins_a: mmc3@0 { - allwinner,pins = "PI4","PI5","PI6","PI7","PI8","PI9"; + allwinner,pins = "PI4", "PI5", "PI6", + "PI7", "PI8", "PI9"; allwinner,function = "mmc3"; allwinner,drive = <SUN4I_PINCTRL_30_MA>; allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; - ir0_pins_a: ir0@0 { - allwinner,pins = "PB3","PB4"; + ir0_rx_pins_a: ir0@0 { + allwinner,pins = "PB4"; allwinner,function = "ir0"; allwinner,drive = <SUN4I_PINCTRL_10_MA>; allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; - ir1_pins_a: ir1@0 { - allwinner,pins = "PB22","PB23"; + ir0_tx_pins_a: ir0@1 { + allwinner,pins = "PB3"; + allwinner,function = "ir0"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + }; + + ir1_rx_pins_a: ir1@0 { + allwinner,pins = "PB23"; + allwinner,function = "ir1"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + }; + + ir1_tx_pins_a: ir1@1 { + allwinner,pins = "PB22"; allwinner,function = "ir1"; allwinner,drive = <SUN4I_PINCTRL_10_MA>; allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; @@ -1129,7 +1240,8 @@ }; i2c0: i2c@01c2ac00 { - compatible = "allwinner,sun7i-a20-i2c", "allwinner,sun4i-a10-i2c"; + compatible = "allwinner,sun7i-a20-i2c", + "allwinner,sun4i-a10-i2c"; reg = <0x01c2ac00 0x400>; interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; clocks = <&apb1_gates 0>; @@ -1139,7 +1251,8 @@ }; i2c1: i2c@01c2b000 { - compatible = "allwinner,sun7i-a20-i2c", "allwinner,sun4i-a10-i2c"; + compatible = "allwinner,sun7i-a20-i2c", + "allwinner,sun4i-a10-i2c"; reg = <0x01c2b000 0x400>; interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>; clocks = <&apb1_gates 1>; @@ -1149,7 +1262,8 @@ }; i2c2: i2c@01c2b400 { - compatible = "allwinner,sun7i-a20-i2c", "allwinner,sun4i-a10-i2c"; + compatible = "allwinner,sun7i-a20-i2c", + "allwinner,sun4i-a10-i2c"; reg = <0x01c2b400 0x400>; interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>; clocks = <&apb1_gates 2>; @@ -1159,7 +1273,8 @@ }; i2c3: i2c@01c2b800 { - compatible = "allwinner,sun7i-a20-i2c", "allwinner,sun4i-a10-i2c"; + compatible = "allwinner,sun7i-a20-i2c", + "allwinner,sun4i-a10-i2c"; reg = <0x01c2b800 0x400>; interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>; clocks = <&apb1_gates 3>; @@ -1169,7 +1284,8 @@ }; i2c4: i2c@01c2c000 { - compatible = "allwinner,sun7i-a20-i2c", "allwinner,sun4i-a10-i2c"; + compatible = "allwinner,sun7i-a20-i2c", + "allwinner,sun4i-a10-i2c"; reg = <0x01c2c000 0x400>; interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>; clocks = <&apb1_gates 15>; diff --git a/arch/arm/boot/dts/sun8i-a23-a33.dtsi b/arch/arm/boot/dts/sun8i-a23-a33.dtsi new file mode 100644 index 000000000..7abd0ae31 --- /dev/null +++ b/arch/arm/boot/dts/sun8i-a23-a33.dtsi @@ -0,0 +1,636 @@ +/* + * Copyright 2014 Chen-Yu Tsai + * + * Chen-Yu Tsai <wens@csie.org> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +#include "skeleton.dtsi" + +#include <dt-bindings/interrupt-controller/arm-gic.h> + +#include <dt-bindings/pinctrl/sun4i-a10.h> + +/ { + interrupt-parent = <&gic>; + + chosen { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + framebuffer@0 { + compatible = "allwinner,simple-framebuffer", + "simple-framebuffer"; + allwinner,pipeline = "de_be0-lcd0"; + clocks = <&pll6 0>; + status = "disabled"; + }; + }; + + timer { + compatible = "arm,armv7-timer"; + interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>; + clock-frequency = <24000000>; + arm,cpu-registers-not-fw-configured; + }; + + cpus { + enable-method = "allwinner,sun8i-a23"; + #address-cells = <1>; + #size-cells = <0>; + + cpu@0 { + compatible = "arm,cortex-a7"; + device_type = "cpu"; + reg = <0>; + }; + + cpu@1 { + compatible = "arm,cortex-a7"; + device_type = "cpu"; + reg = <1>; + }; + }; + + clocks { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + osc24M: osc24M_clk { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <24000000>; + clock-output-names = "osc24M"; + }; + + osc32k: osc32k_clk { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <32768>; + clock-output-names = "osc32k"; + }; + + pll1: clk@01c20000 { + #clock-cells = <0>; + compatible = "allwinner,sun8i-a23-pll1-clk"; + reg = <0x01c20000 0x4>; + clocks = <&osc24M>; + clock-output-names = "pll1"; + }; + + /* dummy clock until actually implemented */ + pll5: pll5_clk { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <0>; + clock-output-names = "pll5"; + }; + + pll6: clk@01c20028 { + #clock-cells = <1>; + compatible = "allwinner,sun6i-a31-pll6-clk"; + reg = <0x01c20028 0x4>; + clocks = <&osc24M>; + clock-output-names = "pll6", "pll6x2"; + }; + + cpu: cpu_clk@01c20050 { + #clock-cells = <0>; + compatible = "allwinner,sun4i-a10-cpu-clk"; + reg = <0x01c20050 0x4>; + + /* + * PLL1 is listed twice here. + * While it looks suspicious, it's actually documented + * that way both in the datasheet and in the code from + * Allwinner. + */ + clocks = <&osc32k>, <&osc24M>, <&pll1>, <&pll1>; + clock-output-names = "cpu"; + }; + + axi: axi_clk@01c20050 { + #clock-cells = <0>; + compatible = "allwinner,sun8i-a23-axi-clk"; + reg = <0x01c20050 0x4>; + clocks = <&cpu>; + clock-output-names = "axi"; + }; + + ahb1: ahb1_clk@01c20054 { + #clock-cells = <0>; + compatible = "allwinner,sun6i-a31-ahb1-clk"; + reg = <0x01c20054 0x4>; + clocks = <&osc32k>, <&osc24M>, <&axi>, <&pll6 0>; + clock-output-names = "ahb1"; + }; + + apb1: apb1_clk@01c20054 { + #clock-cells = <0>; + compatible = "allwinner,sun4i-a10-apb0-clk"; + reg = <0x01c20054 0x4>; + clocks = <&ahb1>; + clock-output-names = "apb1"; + }; + + ahb1_gates: clk@01c20060 { + #clock-cells = <1>; + compatible = "allwinner,sun8i-a23-ahb1-gates-clk"; + reg = <0x01c20060 0x8>; + clocks = <&ahb1>; + clock-output-names = "ahb1_mipidsi", "ahb1_dma", + "ahb1_mmc0", "ahb1_mmc1", "ahb1_mmc2", + "ahb1_nand", "ahb1_sdram", + "ahb1_hstimer", "ahb1_spi0", + "ahb1_spi1", "ahb1_otg", "ahb1_ehci", + "ahb1_ohci", "ahb1_ve", "ahb1_lcd", + "ahb1_csi", "ahb1_be", "ahb1_fe", + "ahb1_gpu", "ahb1_spinlock", + "ahb1_drc"; + }; + + apb1_gates: clk@01c20068 { + #clock-cells = <1>; + compatible = "allwinner,sun8i-a23-apb1-gates-clk"; + reg = <0x01c20068 0x4>; + clocks = <&apb1>; + clock-output-names = "apb1_codec", "apb1_pio", + "apb1_daudio0", "apb1_daudio1"; + }; + + apb2: clk@01c20058 { + #clock-cells = <0>; + compatible = "allwinner,sun4i-a10-apb1-clk"; + reg = <0x01c20058 0x4>; + clocks = <&osc32k>, <&osc24M>, <&pll6 0>, <&pll6 0>; + clock-output-names = "apb2"; + }; + + apb2_gates: clk@01c2006c { + #clock-cells = <1>; + compatible = "allwinner,sun8i-a23-apb2-gates-clk"; + reg = <0x01c2006c 0x4>; + clocks = <&apb2>; + clock-output-names = "apb2_i2c0", "apb2_i2c1", + "apb2_i2c2", "apb2_uart0", + "apb2_uart1", "apb2_uart2", + "apb2_uart3", "apb2_uart4"; + }; + + mmc0_clk: clk@01c20088 { + #clock-cells = <1>; + compatible = "allwinner,sun4i-a10-mmc-clk"; + reg = <0x01c20088 0x4>; + clocks = <&osc24M>, <&pll6 0>; + clock-output-names = "mmc0", + "mmc0_output", + "mmc0_sample"; + }; + + mmc1_clk: clk@01c2008c { + #clock-cells = <1>; + compatible = "allwinner,sun4i-a10-mmc-clk"; + reg = <0x01c2008c 0x4>; + clocks = <&osc24M>, <&pll6 0>; + clock-output-names = "mmc1", + "mmc1_output", + "mmc1_sample"; + }; + + mmc2_clk: clk@01c20090 { + #clock-cells = <1>; + compatible = "allwinner,sun4i-a10-mmc-clk"; + reg = <0x01c20090 0x4>; + clocks = <&osc24M>, <&pll6 0>; + clock-output-names = "mmc2", + "mmc2_output", + "mmc2_sample"; + }; + + usb_clk: clk@01c200cc { + #clock-cells = <1>; + #reset-cells = <1>; + compatible = "allwinner,sun8i-a23-usb-clk"; + reg = <0x01c200cc 0x4>; + clocks = <&osc24M>; + clock-output-names = "usb_phy0", "usb_phy1", "usb_hsic", + "usb_hsic_12M", "usb_ohci0"; + }; + }; + + soc@01c00000 { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + dma: dma-controller@01c02000 { + compatible = "allwinner,sun8i-a23-dma"; + reg = <0x01c02000 0x1000>; + interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ahb1_gates 6>; + resets = <&ahb1_rst 6>; + #dma-cells = <1>; + }; + + mmc0: mmc@01c0f000 { + compatible = "allwinner,sun5i-a13-mmc"; + reg = <0x01c0f000 0x1000>; + clocks = <&ahb1_gates 8>, + <&mmc0_clk 0>, + <&mmc0_clk 1>, + <&mmc0_clk 2>; + clock-names = "ahb", + "mmc", + "output", + "sample"; + resets = <&ahb1_rst 8>; + reset-names = "ahb"; + interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; + }; + + mmc1: mmc@01c10000 { + compatible = "allwinner,sun5i-a13-mmc"; + reg = <0x01c10000 0x1000>; + clocks = <&ahb1_gates 9>, + <&mmc1_clk 0>, + <&mmc1_clk 1>, + <&mmc1_clk 2>; + clock-names = "ahb", + "mmc", + "output", + "sample"; + resets = <&ahb1_rst 9>; + reset-names = "ahb"; + interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; + }; + + mmc2: mmc@01c11000 { + compatible = "allwinner,sun5i-a13-mmc"; + reg = <0x01c11000 0x1000>; + clocks = <&ahb1_gates 10>, + <&mmc2_clk 0>, + <&mmc2_clk 1>, + <&mmc2_clk 2>; + clock-names = "ahb", + "mmc", + "output", + "sample"; + resets = <&ahb1_rst 10>; + reset-names = "ahb"; + interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; + }; + + pio: pinctrl@01c20800 { + /* compatible gets set in SoC specific dtsi file */ + reg = <0x01c20800 0x400>; + /* interrupts get set in SoC specific dtsi file */ + clocks = <&apb1_gates 5>; + gpio-controller; + interrupt-controller; + #address-cells = <1>; + #size-cells = <0>; + #gpio-cells = <3>; + + uart0_pins_a: uart0@0 { + allwinner,pins = "PF2", "PF4"; + allwinner,function = "uart0"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + }; + + mmc0_pins_a: mmc0@0 { + allwinner,pins = "PF0", "PF1", "PF2", + "PF3", "PF4", "PF5"; + allwinner,function = "mmc0"; + allwinner,drive = <SUN4I_PINCTRL_30_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + }; + + mmc1_pins_a: mmc1@0 { + allwinner,pins = "PG0", "PG1", "PG2", + "PG3", "PG4", "PG5"; + allwinner,function = "mmc1"; + allwinner,drive = <SUN4I_PINCTRL_30_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + }; + + mmc2_8bit_pins: mmc2_8bit { + allwinner,pins = "PC5", "PC6", "PC8", + "PC9", "PC10", "PC11", + "PC12", "PC13", "PC14", + "PC15"; + allwinner,function = "mmc2"; + allwinner,drive = <SUN4I_PINCTRL_30_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + }; + + i2c0_pins_a: i2c0@0 { + allwinner,pins = "PH2", "PH3"; + allwinner,function = "i2c0"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + }; + + i2c1_pins_a: i2c1@0 { + allwinner,pins = "PH4", "PH5"; + allwinner,function = "i2c1"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + }; + + i2c2_pins_a: i2c2@0 { + allwinner,pins = "PE12", "PE13"; + allwinner,function = "i2c2"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + }; + }; + + ahb1_rst: reset@01c202c0 { + #reset-cells = <1>; + compatible = "allwinner,sun6i-a31-clock-reset"; + reg = <0x01c202c0 0xc>; + }; + + apb1_rst: reset@01c202d0 { + #reset-cells = <1>; + compatible = "allwinner,sun6i-a31-clock-reset"; + reg = <0x01c202d0 0x4>; + }; + + apb2_rst: reset@01c202d8 { + #reset-cells = <1>; + compatible = "allwinner,sun6i-a31-clock-reset"; + reg = <0x01c202d8 0x4>; + }; + + timer@01c20c00 { + compatible = "allwinner,sun4i-a10-timer"; + reg = <0x01c20c00 0xa0>; + interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&osc24M>; + }; + + wdt0: watchdog@01c20ca0 { + compatible = "allwinner,sun6i-a31-wdt"; + reg = <0x01c20ca0 0x20>; + interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>; + }; + + lradc: lradc@01c22800 { + compatible = "allwinner,sun4i-a10-lradc-keys"; + reg = <0x01c22800 0x100>; + interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + uart0: serial@01c28000 { + compatible = "snps,dw-apb-uart"; + reg = <0x01c28000 0x400>; + interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>; + reg-shift = <2>; + reg-io-width = <4>; + clocks = <&apb2_gates 16>; + resets = <&apb2_rst 16>; + dmas = <&dma 6>, <&dma 6>; + dma-names = "rx", "tx"; + status = "disabled"; + }; + + uart1: serial@01c28400 { + compatible = "snps,dw-apb-uart"; + reg = <0x01c28400 0x400>; + interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>; + reg-shift = <2>; + reg-io-width = <4>; + clocks = <&apb2_gates 17>; + resets = <&apb2_rst 17>; + dmas = <&dma 7>, <&dma 7>; + dma-names = "rx", "tx"; + status = "disabled"; + }; + + uart2: serial@01c28800 { + compatible = "snps,dw-apb-uart"; + reg = <0x01c28800 0x400>; + interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>; + reg-shift = <2>; + reg-io-width = <4>; + clocks = <&apb2_gates 18>; + resets = <&apb2_rst 18>; + dmas = <&dma 8>, <&dma 8>; + dma-names = "rx", "tx"; + status = "disabled"; + }; + + uart3: serial@01c28c00 { + compatible = "snps,dw-apb-uart"; + reg = <0x01c28c00 0x400>; + interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>; + reg-shift = <2>; + reg-io-width = <4>; + clocks = <&apb2_gates 19>; + resets = <&apb2_rst 19>; + dmas = <&dma 9>, <&dma 9>; + dma-names = "rx", "tx"; + status = "disabled"; + }; + + uart4: serial@01c29000 { + compatible = "snps,dw-apb-uart"; + reg = <0x01c29000 0x400>; + interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>; + reg-shift = <2>; + reg-io-width = <4>; + clocks = <&apb2_gates 20>; + resets = <&apb2_rst 20>; + dmas = <&dma 10>, <&dma 10>; + dma-names = "rx", "tx"; + status = "disabled"; + }; + + i2c0: i2c@01c2ac00 { + compatible = "allwinner,sun6i-a31-i2c"; + reg = <0x01c2ac00 0x400>; + interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&apb2_gates 0>; + resets = <&apb2_rst 0>; + status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; + }; + + i2c1: i2c@01c2b000 { + compatible = "allwinner,sun6i-a31-i2c"; + reg = <0x01c2b000 0x400>; + interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&apb2_gates 1>; + resets = <&apb2_rst 1>; + status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; + }; + + i2c2: i2c@01c2b400 { + compatible = "allwinner,sun6i-a31-i2c"; + reg = <0x01c2b400 0x400>; + interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&apb2_gates 2>; + resets = <&apb2_rst 2>; + status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; + }; + + gic: interrupt-controller@01c81000 { + compatible = "arm,cortex-a7-gic", "arm,cortex-a15-gic"; + reg = <0x01c81000 0x1000>, + <0x01c82000 0x1000>, + <0x01c84000 0x2000>, + <0x01c86000 0x2000>; + interrupt-controller; + #interrupt-cells = <3>; + interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>; + }; + + rtc: rtc@01f00000 { + compatible = "allwinner,sun6i-a31-rtc"; + reg = <0x01f00000 0x54>; + interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>; + }; + + prcm@01f01400 { + compatible = "allwinner,sun8i-a23-prcm"; + reg = <0x01f01400 0x200>; + + ar100: ar100_clk { + compatible = "fixed-factor-clock"; + #clock-cells = <0>; + clock-div = <1>; + clock-mult = <1>; + clocks = <&osc24M>; + clock-output-names = "ar100"; + }; + + ahb0: ahb0_clk { + compatible = "fixed-factor-clock"; + #clock-cells = <0>; + clock-div = <1>; + clock-mult = <1>; + clocks = <&ar100>; + clock-output-names = "ahb0"; + }; + + apb0: apb0_clk { + compatible = "allwinner,sun8i-a23-apb0-clk"; + #clock-cells = <0>; + clocks = <&ahb0>; + clock-output-names = "apb0"; + }; + + apb0_gates: apb0_gates_clk { + compatible = "allwinner,sun8i-a23-apb0-gates-clk"; + #clock-cells = <1>; + clocks = <&apb0>; + clock-output-names = "apb0_pio", "apb0_timer", + "apb0_rsb", "apb0_uart", + "apb0_i2c"; + }; + + apb0_rst: apb0_rst { + compatible = "allwinner,sun6i-a31-clock-reset"; + #reset-cells = <1>; + }; + }; + + cpucfg@01f01c00 { + compatible = "allwinner,sun8i-a23-cpuconfig"; + reg = <0x01f01c00 0x300>; + }; + + r_uart: serial@01f02800 { + compatible = "snps,dw-apb-uart"; + reg = <0x01f02800 0x400>; + interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>; + reg-shift = <2>; + reg-io-width = <4>; + clocks = <&apb0_gates 4>; + resets = <&apb0_rst 4>; + status = "disabled"; + }; + + r_pio: pinctrl@01f02c00 { + compatible = "allwinner,sun8i-a23-r-pinctrl"; + reg = <0x01f02c00 0x400>; + interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&apb0_gates 0>; + resets = <&apb0_rst 0>; + gpio-controller; + interrupt-controller; + #address-cells = <1>; + #size-cells = <0>; + #gpio-cells = <3>; + + r_uart_pins_a: r_uart@0 { + allwinner,pins = "PL2", "PL3"; + allwinner,function = "s_uart"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + }; + }; + }; +}; diff --git a/arch/arm/boot/dts/sun8i-a23-evb.dts b/arch/arm/boot/dts/sun8i-a23-evb.dts new file mode 100644 index 000000000..610786e63 --- /dev/null +++ b/arch/arm/boot/dts/sun8i-a23-evb.dts @@ -0,0 +1,134 @@ +/* + * Copyright 2015 Maxime Ripard + * + * Maxime Ripard <maxime.ripard@free-electrons.com> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; +#include "sun8i-a23.dtsi" +#include "sunxi-common-regulators.dtsi" + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> +#include <dt-bindings/pinctrl/sun4i-a10.h> + +/ { + model = "Allwinner A23 Evaluation Board"; + compatible = "allwinner,sun8i-a23-evb", "allwinner,sun8i-a23"; + + aliases { + i2c0 = &i2c0; + i2c1 = &i2c1; + serial0 = &r_uart; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; +}; + +&i2c0 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins_a>; + status = "okay"; +}; + +&i2c1 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_pins_a>; + status = "okay"; +}; + +&lradc { + vref-supply = <®_vcc3v0>; + status = "okay"; + + button@190 { + label = "Volume Up"; + linux,code = <KEY_VOLUMEUP>; + channel = <0>; + voltage = <190000>; + }; + + button@390 { + label = "Volume Down"; + linux,code = <KEY_VOLUMEDOWN>; + channel = <0>; + voltage = <390000>; + }; + + button@600 { + label = "Home"; + linux,code = <KEY_HOME>; + channel = <0>; + voltage = <600000>; + }; +}; + +&mmc0 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_evb>; + vmmc-supply = <®_vcc3v0>; + bus-width = <4>; + cd-gpios = <&pio 1 4 GPIO_ACTIVE_HIGH>; /* PB4 */ + cd-inverted; + status = "okay"; +}; + +&pio { + mmc0_cd_pin_evb: mmc0_cd_pin@0 { + allwinner,pins = "PB4"; + allwinner,function = "gpio_in"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; + }; +}; + +/* + * The RX line has a non-populated resistance. In order to use it, you + * need to solder R207 on the back of the board in order to close the + * line and get a working UART. + */ +&r_uart { + pinctrl-names = "default"; + pinctrl-0 = <&r_uart_pins_a>; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/sun8i-a23-ippo-q8h-v1.2.dts b/arch/arm/boot/dts/sun8i-a23-ippo-q8h-v1.2.dts index dd31c53e2..382d64c3b 100644 --- a/arch/arm/boot/dts/sun8i-a23-ippo-q8h-v1.2.dts +++ b/arch/arm/boot/dts/sun8i-a23-ippo-q8h-v1.2.dts @@ -16,11 +16,6 @@ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * You should have received a copy of the GNU General Public - * License along with this file; if not, write to the Free - * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, - * MA 02110-1301 USA - * * Or, alternatively, * * b) Permission is hereby granted, free of charge, to any person diff --git a/arch/arm/boot/dts/sun8i-a23-ippo-q8h-v5.dts b/arch/arm/boot/dts/sun8i-a23-ippo-q8h-v5.dts index 623573e46..95134c69c 100644 --- a/arch/arm/boot/dts/sun8i-a23-ippo-q8h-v5.dts +++ b/arch/arm/boot/dts/sun8i-a23-ippo-q8h-v5.dts @@ -18,11 +18,6 @@ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * You should have received a copy of the GNU General Public - * License along with this file; if not, write to the Free - * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, - * MA 02110-1301 USA - * * Or, alternatively, * * b) Permission is hereby granted, free of charge, to any person @@ -64,71 +59,69 @@ }; chosen { - bootargs = "earlyprintk console=ttyS0,115200"; + stdout-path = "serial0:115200n8"; }; +}; - soc@01c00000 { - mmc0: mmc@01c0f000 { - pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_q8h>; - vmmc-supply = <®_vcc3v0>; - bus-width = <4>; - cd-gpios = <&pio 1 4 GPIO_ACTIVE_HIGH>; /* PB4 */ - cd-inverted; - status = "okay"; - }; - - pinctrl@01c20800 { - mmc0_cd_pin_q8h: mmc0_cd_pin@0 { - allwinner,pins = "PB4"; - allwinner,function = "gpio_in"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; - }; - }; +&i2c0 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins_a>; + status = "okay"; +}; - lradc: lradc@01c22800 { - vref-supply = <®_vcc3v0>; - status = "okay"; +&i2c1 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_pins_a>; + status = "okay"; +}; - button@200 { - label = "Volume Up"; - linux,code = <KEY_VOLUMEUP>; - channel = <0>; - voltage = <200000>; - }; +&i2c2 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c2_pins_a>; + /* pull-ups and devices require PMIC regulator */ + status = "failed"; +}; - button@400 { - label = "Volume Down"; - linux,code = <KEY_VOLUMEDOWN>; - channel = <0>; - voltage = <400000>; - }; - }; +&lradc { + vref-supply = <®_vcc3v0>; + status = "okay"; - i2c0: i2c@01c2ac00 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c0_pins_a>; - status = "okay"; - }; + button@200 { + label = "Volume Up"; + linux,code = <KEY_VOLUMEUP>; + channel = <0>; + voltage = <200000>; + }; - i2c1: i2c@01c2b000 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c1_pins_a>; - status = "okay"; - }; + button@400 { + label = "Volume Down"; + linux,code = <KEY_VOLUMEDOWN>; + channel = <0>; + voltage = <400000>; + }; +}; - i2c2: i2c@01c2b400 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c2_pins_a>; - /* pull-ups and devices require PMIC regulator */ - status = "failed"; - }; +&mmc0 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_q8h>; + vmmc-supply = <®_vcc3v0>; + bus-width = <4>; + cd-gpios = <&pio 1 4 GPIO_ACTIVE_HIGH>; /* PB4 */ + cd-inverted; + status = "okay"; +}; - r_uart: serial@01f02800 { - pinctrl-names = "default"; - pinctrl-0 = <&r_uart_pins_a>; - status = "okay"; - }; +&pio { + mmc0_cd_pin_q8h: mmc0_cd_pin@0 { + allwinner,pins = "PB4"; + allwinner,function = "gpio_in"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; }; }; + +&r_uart { + pinctrl-names = "default"; + pinctrl-0 = <&r_uart_pins_a>; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/sun8i-a23.dtsi b/arch/arm/boot/dts/sun8i-a23.dtsi index 382ebd137..8698f7aa3 100644 --- a/arch/arm/boot/dts/sun8i-a23.dtsi +++ b/arch/arm/boot/dts/sun8i-a23.dtsi @@ -18,11 +18,6 @@ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * You should have received a copy of the GNU General Public - * License along with this file; if not, write to the Free - * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, - * MA 02110-1301 USA - * * Or, alternatively, * * b) Permission is hereby granted, free of charge, to any person @@ -47,206 +42,14 @@ * OTHER DEALINGS IN THE SOFTWARE. */ -#include "skeleton.dtsi" - -#include <dt-bindings/interrupt-controller/arm-gic.h> - -#include <dt-bindings/pinctrl/sun4i-a10.h> +#include "sun8i-a23-a33.dtsi" / { - interrupt-parent = <&gic>; - - chosen { - #address-cells = <1>; - #size-cells = <1>; - ranges; - - framebuffer@0 { - compatible = "allwinner,simple-framebuffer", - "simple-framebuffer"; - allwinner,pipeline = "de_be0-lcd0"; - clocks = <&pll6 0>; - status = "disabled"; - }; - }; - - cpus { - #address-cells = <1>; - #size-cells = <0>; - - cpu@0 { - compatible = "arm,cortex-a7"; - device_type = "cpu"; - reg = <0>; - }; - - cpu@1 { - compatible = "arm,cortex-a7"; - device_type = "cpu"; - reg = <1>; - }; - }; - memory { reg = <0x40000000 0x40000000>; }; clocks { - #address-cells = <1>; - #size-cells = <1>; - ranges; - - osc24M: osc24M_clk { - #clock-cells = <0>; - compatible = "fixed-clock"; - clock-frequency = <24000000>; - clock-output-names = "osc24M"; - }; - - osc32k: osc32k_clk { - #clock-cells = <0>; - compatible = "fixed-clock"; - clock-frequency = <32768>; - clock-output-names = "osc32k"; - }; - - pll1: clk@01c20000 { - #clock-cells = <0>; - compatible = "allwinner,sun8i-a23-pll1-clk"; - reg = <0x01c20000 0x4>; - clocks = <&osc24M>; - clock-output-names = "pll1"; - }; - - /* dummy clock until actually implemented */ - pll5: pll5_clk { - #clock-cells = <0>; - compatible = "fixed-clock"; - clock-frequency = <0>; - clock-output-names = "pll5"; - }; - - pll6: clk@01c20028 { - #clock-cells = <1>; - compatible = "allwinner,sun6i-a31-pll6-clk"; - reg = <0x01c20028 0x4>; - clocks = <&osc24M>; - clock-output-names = "pll6", "pll6x2"; - }; - - cpu: cpu_clk@01c20050 { - #clock-cells = <0>; - compatible = "allwinner,sun4i-a10-cpu-clk"; - reg = <0x01c20050 0x4>; - - /* - * PLL1 is listed twice here. - * While it looks suspicious, it's actually documented - * that way both in the datasheet and in the code from - * Allwinner. - */ - clocks = <&osc32k>, <&osc24M>, <&pll1>, <&pll1>; - clock-output-names = "cpu"; - }; - - axi: axi_clk@01c20050 { - #clock-cells = <0>; - compatible = "allwinner,sun8i-a23-axi-clk"; - reg = <0x01c20050 0x4>; - clocks = <&cpu>; - clock-output-names = "axi"; - }; - - ahb1: ahb1_clk@01c20054 { - #clock-cells = <0>; - compatible = "allwinner,sun6i-a31-ahb1-clk"; - reg = <0x01c20054 0x4>; - clocks = <&osc32k>, <&osc24M>, <&axi>, <&pll6 0>; - clock-output-names = "ahb1"; - }; - - apb1: apb1_clk@01c20054 { - #clock-cells = <0>; - compatible = "allwinner,sun4i-a10-apb0-clk"; - reg = <0x01c20054 0x4>; - clocks = <&ahb1>; - clock-output-names = "apb1"; - }; - - ahb1_gates: clk@01c20060 { - #clock-cells = <1>; - compatible = "allwinner,sun8i-a23-ahb1-gates-clk"; - reg = <0x01c20060 0x8>; - clocks = <&ahb1>; - clock-output-names = "ahb1_mipidsi", "ahb1_dma", - "ahb1_mmc0", "ahb1_mmc1", "ahb1_mmc2", - "ahb1_nand", "ahb1_sdram", - "ahb1_hstimer", "ahb1_spi0", - "ahb1_spi1", "ahb1_otg", "ahb1_ehci", - "ahb1_ohci", "ahb1_ve", "ahb1_lcd", - "ahb1_csi", "ahb1_be", "ahb1_fe", - "ahb1_gpu", "ahb1_spinlock", - "ahb1_drc"; - }; - - apb1_gates: clk@01c20068 { - #clock-cells = <1>; - compatible = "allwinner,sun8i-a23-apb1-gates-clk"; - reg = <0x01c20068 0x4>; - clocks = <&apb1>; - clock-output-names = "apb1_codec", "apb1_pio", - "apb1_daudio0", "apb1_daudio1"; - }; - - apb2: clk@01c20058 { - #clock-cells = <0>; - compatible = "allwinner,sun4i-a10-apb1-clk"; - reg = <0x01c20058 0x4>; - clocks = <&osc32k>, <&osc24M>, <&pll6 0>, <&pll6 0>; - clock-output-names = "apb2"; - }; - - apb2_gates: clk@01c2006c { - #clock-cells = <1>; - compatible = "allwinner,sun8i-a23-apb2-gates-clk"; - reg = <0x01c2006c 0x4>; - clocks = <&apb2>; - clock-output-names = "apb2_i2c0", "apb2_i2c1", - "apb2_i2c2", "apb2_uart0", - "apb2_uart1", "apb2_uart2", - "apb2_uart3", "apb2_uart4"; - }; - - mmc0_clk: clk@01c20088 { - #clock-cells = <1>; - compatible = "allwinner,sun4i-a10-mmc-clk"; - reg = <0x01c20088 0x4>; - clocks = <&osc24M>, <&pll6 0>; - clock-output-names = "mmc0", - "mmc0_output", - "mmc0_sample"; - }; - - mmc1_clk: clk@01c2008c { - #clock-cells = <1>; - compatible = "allwinner,sun4i-a10-mmc-clk"; - reg = <0x01c2008c 0x4>; - clocks = <&osc24M>, <&pll6 0>; - clock-output-names = "mmc1", - "mmc1_output", - "mmc1_sample"; - }; - - mmc2_clk: clk@01c20090 { - #clock-cells = <1>; - compatible = "allwinner,sun4i-a10-mmc-clk"; - reg = <0x01c20090 0x4>; - clocks = <&osc24M>, <&pll6 0>; - clock-output-names = "mmc2", - "mmc2_output", - "mmc2_sample"; - }; - mbus_clk: clk@01c2015c { #clock-cells = <0>; compatible = "allwinner,sun8i-a23-mbus-clk"; @@ -255,357 +58,11 @@ clock-output-names = "mbus"; }; }; +}; - soc@01c00000 { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <1>; - ranges; - - dma: dma-controller@01c02000 { - compatible = "allwinner,sun8i-a23-dma"; - reg = <0x01c02000 0x1000>; - interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&ahb1_gates 6>; - resets = <&ahb1_rst 6>; - #dma-cells = <1>; - }; - - mmc0: mmc@01c0f000 { - compatible = "allwinner,sun5i-a13-mmc"; - reg = <0x01c0f000 0x1000>; - clocks = <&ahb1_gates 8>, - <&mmc0_clk 0>, - <&mmc0_clk 1>, - <&mmc0_clk 2>; - clock-names = "ahb", - "mmc", - "output", - "sample"; - resets = <&ahb1_rst 8>; - reset-names = "ahb"; - interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>; - status = "disabled"; - }; - - mmc1: mmc@01c10000 { - compatible = "allwinner,sun5i-a13-mmc"; - reg = <0x01c10000 0x1000>; - clocks = <&ahb1_gates 9>, - <&mmc1_clk 0>, - <&mmc1_clk 1>, - <&mmc1_clk 2>; - clock-names = "ahb", - "mmc", - "output", - "sample"; - resets = <&ahb1_rst 9>; - reset-names = "ahb"; - interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>; - status = "disabled"; - }; - - mmc2: mmc@01c11000 { - compatible = "allwinner,sun5i-a13-mmc"; - reg = <0x01c11000 0x1000>; - clocks = <&ahb1_gates 10>, - <&mmc2_clk 0>, - <&mmc2_clk 1>, - <&mmc2_clk 2>; - clock-names = "ahb", - "mmc", - "output", - "sample"; - resets = <&ahb1_rst 10>; - reset-names = "ahb"; - interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>; - status = "disabled"; - }; - - pio: pinctrl@01c20800 { - compatible = "allwinner,sun8i-a23-pinctrl"; - reg = <0x01c20800 0x400>; - interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&apb1_gates 5>; - gpio-controller; - interrupt-controller; - #address-cells = <1>; - #size-cells = <0>; - #gpio-cells = <3>; - - uart0_pins_a: uart0@0 { - allwinner,pins = "PF2", "PF4"; - allwinner,function = "uart0"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; - }; - - mmc0_pins_a: mmc0@0 { - allwinner,pins = "PF0","PF1","PF2","PF3","PF4","PF5"; - allwinner,function = "mmc0"; - allwinner,drive = <SUN4I_PINCTRL_30_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; - }; - - mmc1_pins_a: mmc1@0 { - allwinner,pins = "PG0","PG1","PG2","PG3","PG4","PG5"; - allwinner,function = "mmc1"; - allwinner,drive = <SUN4I_PINCTRL_30_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; - }; - - i2c0_pins_a: i2c0@0 { - allwinner,pins = "PH2", "PH3"; - allwinner,function = "i2c0"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; - }; - - i2c1_pins_a: i2c1@0 { - allwinner,pins = "PH4", "PH5"; - allwinner,function = "i2c1"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; - }; - - i2c2_pins_a: i2c2@0 { - allwinner,pins = "PE12", "PE13"; - allwinner,function = "i2c2"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; - }; - }; - - ahb1_rst: reset@01c202c0 { - #reset-cells = <1>; - compatible = "allwinner,sun6i-a31-clock-reset"; - reg = <0x01c202c0 0xc>; - }; - - apb1_rst: reset@01c202d0 { - #reset-cells = <1>; - compatible = "allwinner,sun6i-a31-clock-reset"; - reg = <0x01c202d0 0x4>; - }; - - apb2_rst: reset@01c202d8 { - #reset-cells = <1>; - compatible = "allwinner,sun6i-a31-clock-reset"; - reg = <0x01c202d8 0x4>; - }; - - timer@01c20c00 { - compatible = "allwinner,sun4i-a10-timer"; - reg = <0x01c20c00 0xa0>; - interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&osc24M>; - }; - - wdt0: watchdog@01c20ca0 { - compatible = "allwinner,sun6i-a31-wdt"; - reg = <0x01c20ca0 0x20>; - interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>; - }; - - lradc: lradc@01c22800 { - compatible = "allwinner,sun4i-a10-lradc-keys"; - reg = <0x01c22800 0x100>; - interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>; - status = "disabled"; - }; - - uart0: serial@01c28000 { - compatible = "snps,dw-apb-uart"; - reg = <0x01c28000 0x400>; - interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>; - reg-shift = <2>; - reg-io-width = <4>; - clocks = <&apb2_gates 16>; - resets = <&apb2_rst 16>; - dmas = <&dma 6>, <&dma 6>; - dma-names = "rx", "tx"; - status = "disabled"; - }; - - uart1: serial@01c28400 { - compatible = "snps,dw-apb-uart"; - reg = <0x01c28400 0x400>; - interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>; - reg-shift = <2>; - reg-io-width = <4>; - clocks = <&apb2_gates 17>; - resets = <&apb2_rst 17>; - dmas = <&dma 7>, <&dma 7>; - dma-names = "rx", "tx"; - status = "disabled"; - }; - - uart2: serial@01c28800 { - compatible = "snps,dw-apb-uart"; - reg = <0x01c28800 0x400>; - interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>; - reg-shift = <2>; - reg-io-width = <4>; - clocks = <&apb2_gates 18>; - resets = <&apb2_rst 18>; - dmas = <&dma 8>, <&dma 8>; - dma-names = "rx", "tx"; - status = "disabled"; - }; - - uart3: serial@01c28c00 { - compatible = "snps,dw-apb-uart"; - reg = <0x01c28c00 0x400>; - interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>; - reg-shift = <2>; - reg-io-width = <4>; - clocks = <&apb2_gates 19>; - resets = <&apb2_rst 19>; - dmas = <&dma 9>, <&dma 9>; - dma-names = "rx", "tx"; - status = "disabled"; - }; - - uart4: serial@01c29000 { - compatible = "snps,dw-apb-uart"; - reg = <0x01c29000 0x400>; - interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>; - reg-shift = <2>; - reg-io-width = <4>; - clocks = <&apb2_gates 20>; - resets = <&apb2_rst 20>; - dmas = <&dma 10>, <&dma 10>; - dma-names = "rx", "tx"; - status = "disabled"; - }; - - i2c0: i2c@01c2ac00 { - compatible = "allwinner,sun6i-a31-i2c"; - reg = <0x01c2ac00 0x400>; - interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&apb2_gates 0>; - resets = <&apb2_rst 0>; - status = "disabled"; - #address-cells = <1>; - #size-cells = <0>; - }; - - i2c1: i2c@01c2b000 { - compatible = "allwinner,sun6i-a31-i2c"; - reg = <0x01c2b000 0x400>; - interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&apb2_gates 1>; - resets = <&apb2_rst 1>; - status = "disabled"; - #address-cells = <1>; - #size-cells = <0>; - }; - - i2c2: i2c@01c2b400 { - compatible = "allwinner,sun6i-a31-i2c"; - reg = <0x01c2b400 0x400>; - interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&apb2_gates 2>; - resets = <&apb2_rst 2>; - status = "disabled"; - #address-cells = <1>; - #size-cells = <0>; - }; - - gic: interrupt-controller@01c81000 { - compatible = "arm,cortex-a7-gic", "arm,cortex-a15-gic"; - reg = <0x01c81000 0x1000>, - <0x01c82000 0x1000>, - <0x01c84000 0x2000>, - <0x01c86000 0x2000>; - interrupt-controller; - #interrupt-cells = <3>; - interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>; - }; - - rtc: rtc@01f00000 { - compatible = "allwinner,sun6i-a31-rtc"; - reg = <0x01f00000 0x54>; - interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>; - }; - - prcm@01f01400 { - compatible = "allwinner,sun8i-a23-prcm"; - reg = <0x01f01400 0x200>; - - ar100: ar100_clk { - compatible = "fixed-factor-clock"; - #clock-cells = <0>; - clock-div = <1>; - clock-mult = <1>; - clocks = <&osc24M>; - clock-output-names = "ar100"; - }; - - ahb0: ahb0_clk { - compatible = "fixed-factor-clock"; - #clock-cells = <0>; - clock-div = <1>; - clock-mult = <1>; - clocks = <&ar100>; - clock-output-names = "ahb0"; - }; - - apb0: apb0_clk { - compatible = "allwinner,sun8i-a23-apb0-clk"; - #clock-cells = <0>; - clocks = <&ahb0>; - clock-output-names = "apb0"; - }; - - apb0_gates: apb0_gates_clk { - compatible = "allwinner,sun8i-a23-apb0-gates-clk"; - #clock-cells = <1>; - clocks = <&apb0>; - clock-output-names = "apb0_pio", "apb0_timer", - "apb0_rsb", "apb0_uart", - "apb0_i2c"; - }; - - apb0_rst: apb0_rst { - compatible = "allwinner,sun6i-a31-clock-reset"; - #reset-cells = <1>; - }; - }; - - r_uart: serial@01f02800 { - compatible = "snps,dw-apb-uart"; - reg = <0x01f02800 0x400>; - interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>; - reg-shift = <2>; - reg-io-width = <4>; - clocks = <&apb0_gates 4>; - resets = <&apb0_rst 4>; - status = "disabled"; - }; - - r_pio: pinctrl@01f02c00 { - compatible = "allwinner,sun8i-a23-r-pinctrl"; - reg = <0x01f02c00 0x400>; - interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&apb0_gates 0>; - resets = <&apb0_rst 0>; - gpio-controller; - interrupt-controller; - #address-cells = <1>; - #size-cells = <0>; - #gpio-cells = <3>; - - r_uart_pins_a: r_uart@0 { - allwinner,pins = "PL2", "PL3"; - allwinner,function = "s_uart"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; - }; - }; - }; +&pio { + compatible = "allwinner,sun8i-a23-pinctrl"; + interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>; }; diff --git a/arch/arm/boot/dts/sun8i-a33-et-q8-v1.6.dts b/arch/arm/boot/dts/sun8i-a33-et-q8-v1.6.dts new file mode 100644 index 000000000..19db84486 --- /dev/null +++ b/arch/arm/boot/dts/sun8i-a33-et-q8-v1.6.dts @@ -0,0 +1,88 @@ +/* + * Copyright 2015 Vishnu Patekar + * Vishnu Patekar <vishnupatekar0510@gmail.com> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; +#include "sun8i-a33.dtsi" +#include "sunxi-common-regulators.dtsi" + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> +#include <dt-bindings/pinctrl/sun4i-a10.h> + +/ { + model = "ET Q8 Quad Core Tablet (v1.6)"; + compatible = "et,q8-v1.6", "allwinner,sun8i-a33"; + + aliases { + serial0 = &uart0; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; +}; + +&lradc { + vref-supply = <®_vcc3v0>; + status = "okay"; + + button@200 { + label = "Volume Up"; + linux,code = <KEY_VOLUMEUP>; + channel = <0>; + voltage = <200000>; + }; + + button@400 { + label = "Volume Down"; + linux,code = <KEY_VOLUMEDOWN>; + channel = <0>; + voltage = <400000>; + }; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pins_a>; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/sun8i-a33-ga10h-v1.1.dts b/arch/arm/boot/dts/sun8i-a33-ga10h-v1.1.dts new file mode 100644 index 000000000..866703355 --- /dev/null +++ b/arch/arm/boot/dts/sun8i-a33-ga10h-v1.1.dts @@ -0,0 +1,125 @@ +/* + * Copyright 2015 Hans de Goede <hdegoede@redhat.com> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; +#include "sun8i-a33.dtsi" +#include "sunxi-common-regulators.dtsi" + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> +#include <dt-bindings/pinctrl/sun4i-a10.h> + +/ { + model = "Allwinner GA10H Quad Core Tablet (v1.1)"; + compatible = "allwinner,ga10h-v1.1", "allwinner,sun8i-a33"; + + aliases { + serial0 = &r_uart; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; +}; + +&i2c0 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins_a>; + status = "okay"; +}; + +&i2c1 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_pins_a>; + status = "okay"; +}; + +&lradc { + vref-supply = <®_vcc3v0>; + status = "okay"; + + button@200 { + label = "Volume Up"; + linux,code = <KEY_VOLUMEUP>; + channel = <0>; + voltage = <200000>; + }; + + button@400 { + label = "Volume Down"; + linux,code = <KEY_VOLUMEDOWN>; + channel = <0>; + voltage = <400000>; + }; + + button@600 { + label = "Back"; + linux,code = <KEY_BACK>; + channel = <0>; + voltage = <600000>; + }; +}; + +&mmc0 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_q8h>; + vmmc-supply = <®_vcc3v0>; + bus-width = <4>; + cd-gpios = <&pio 1 4 GPIO_ACTIVE_HIGH>; /* PB4 */ + cd-inverted; + status = "okay"; +}; + +&pio { + mmc0_cd_pin_q8h: mmc0_cd_pin@0 { + allwinner,pins = "PB4"; + allwinner,function = "gpio_in"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; + }; +}; + +&r_uart { + pinctrl-names = "default"; + pinctrl-0 = <&r_uart_pins_a>; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/sun8i-a33-sinlinx-sina33.dts b/arch/arm/boot/dts/sun8i-a33-sinlinx-sina33.dts new file mode 100644 index 000000000..5788c29cb --- /dev/null +++ b/arch/arm/boot/dts/sun8i-a33-sinlinx-sina33.dts @@ -0,0 +1,129 @@ +/* + * Copyright 2015 Chen-Yu Tsai + * + * Chen-Yu Tsai <wens@csie.org> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; +#include "sun8i-a33.dtsi" +#include "sunxi-common-regulators.dtsi" + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> +#include <dt-bindings/pinctrl/sun4i-a10.h> + +/ { + model = "Sinlinx SinA33"; + compatible = "sinlinx,sina33", "allwinner,sun8i-a33"; + + aliases { + serial0 = &uart0; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; +}; + +&lradc { + vref-supply = <®_vcc3v0>; + status = "okay"; + + button@200 { + label = "Volume Up"; + linux,code = <KEY_VOLUMEUP>; + channel = <0>; + voltage = <191011>; + }; + + button@400 { + label = "Volume Down"; + linux,code = <KEY_VOLUMEDOWN>; + channel = <0>; + voltage = <391304>; + }; + + button@600 { + label = "Home"; + linux,code = <KEY_HOME>; + channel = <0>; + voltage = <600000>; + }; +}; + +&mmc0 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_sina33>; + vmmc-supply = <®_vcc3v0>; + bus-width = <4>; + cd-gpios = <&pio 1 4 GPIO_ACTIVE_HIGH>; /* PB4 */ + cd-inverted; + status = "okay"; +}; + +&mmc2 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc2_8bit_pins>; + vmmc-supply = <®_vcc3v0>; + bus-width = <8>; + non-removable; + status = "okay"; +}; + +&mmc2_8bit_pins { + /* eMMC is missing pull-ups */ + allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; +}; + +&pio { + mmc0_cd_pin_sina33: mmc0_cd_pin@0 { + allwinner,pins = "PB4"; + allwinner,function = "gpio_in"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; + }; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pins_b>; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/sun8i-a33.dtsi b/arch/arm/boot/dts/sun8i-a33.dtsi new file mode 100644 index 000000000..85ee08098 --- /dev/null +++ b/arch/arm/boot/dts/sun8i-a33.dtsi @@ -0,0 +1,97 @@ +/* + * Copyright 2014 Chen-Yu Tsai + * + * Chen-Yu Tsai <wens@csie.org> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +#include "sun8i-a23-a33.dtsi" + +/ { + cpus { + cpu@2 { + compatible = "arm,cortex-a7"; + device_type = "cpu"; + reg = <2>; + }; + + cpu@3 { + compatible = "arm,cortex-a7"; + device_type = "cpu"; + reg = <3>; + }; + }; + + memory { + reg = <0x40000000 0x80000000>; + }; + + clocks { + /* Dummy clock for pll11 (DDR1) until actually implemented */ + pll11: pll11_clk { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <0>; + clock-output-names = "pll11"; + }; + + mbus_clk: clk@01c2015c { + #clock-cells = <0>; + compatible = "allwinner,sun8i-a23-mbus-clk"; + reg = <0x01c2015c 0x4>; + clocks = <&osc24M>, <&pll6 1>, <&pll5>, <&pll11>; + clock-output-names = "mbus"; + }; + }; +}; + +&pio { + compatible = "allwinner,sun8i-a33-pinctrl"; + interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>; + + uart0_pins_b: uart0@1 { + allwinner,pins = "PB0", "PB1"; + allwinner,function = "uart0"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + }; + +}; diff --git a/arch/arm/boot/dts/sun9i-a80-cubieboard4.dts b/arch/arm/boot/dts/sun9i-a80-cubieboard4.dts new file mode 100644 index 000000000..6484dcf69 --- /dev/null +++ b/arch/arm/boot/dts/sun9i-a80-cubieboard4.dts @@ -0,0 +1,99 @@ +/* + * Copyright 2015 Tyler Baker + * + * Tyler Baker <tyler.baker@linaro.org> + * Chen-Yu Tsai <wens@csie.org> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; +#include "sun9i-a80.dtsi" +#include "sunxi-common-regulators.dtsi" + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/pinctrl/sun4i-a10.h> + +/ { + model = "Cubietech Cubieboard4"; + compatible = "cubietech,a80-cubieboard4", "allwinner,sun9i-a80"; + + aliases { + serial0 = &uart0; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + +}; + +&pio { + mmc0_cd_pin_cubieboard4: mmc0_cd_pin@0 { + allwinner,pins = "PH18"; + allwinner,function = "gpio_in"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; + }; +}; + +&mmc0 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_pins>, <&mmc0_cd_pin_cubieboard4>; + vmmc-supply = <®_vcc3v0>; + bus-width = <4>; + cd-gpios = <&pio 7 18 GPIO_ACTIVE_HIGH>; /* PH18 */ + cd-inverted; + status = "okay"; +}; + +&mmc2 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc2_8bit_pins>; + vmmc-supply = <®_vcc3v0>; + bus-width = <8>; + non-removable; + status = "okay"; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pins_a>; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/sun9i-a80-optimus.dts b/arch/arm/boot/dts/sun9i-a80-optimus.dts index a3fed2bdf..6ce4b5e8b 100644 --- a/arch/arm/boot/dts/sun9i-a80-optimus.dts +++ b/arch/arm/boot/dts/sun9i-a80-optimus.dts @@ -18,11 +18,6 @@ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * You should have received a copy of the GNU General Public - * License along with this file; if not, write to the Free - * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, - * MA 02110-1301 USA - * * Or, alternatively, * * b) Permission is hereby granted, free of charge, to any person @@ -64,7 +59,7 @@ }; chosen { - bootargs = "earlyprintk console=ttyS0,115200"; + stdout-path = "serial0:115200n8"; }; leds { @@ -86,6 +81,29 @@ gpios = <&pio 7 0 GPIO_ACTIVE_HIGH>; }; }; + + reg_usb3_vbus: usb3-vbus { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&usb3_vbus_pin_optimus>; + regulator-name = "usb3-vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + enable-active-high; + gpio = <&pio 7 5 GPIO_ACTIVE_HIGH>; /* PH5 */ + }; +}; + +&ehci0 { + status = "okay"; +}; + +&ehci1 { + status = "okay"; +}; + +&ehci2 { + status = "okay"; }; &i2c3 { @@ -99,6 +117,14 @@ allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; }; +&ohci0 { + status = "okay"; +}; + +&ohci2 { + status = "okay"; +}; + &pio { led_pins_optimus: led-pins@0 { allwinner,pins = "PH0", "PH1"; @@ -113,6 +139,20 @@ allwinner,drive = <SUN4I_PINCTRL_10_MA>; allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; }; + + usb1_vbus_pin_optimus: usb1_vbus_pin@1 { + allwinner,pins = "PH4"; + allwinner,function = "gpio_out"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + }; + + usb3_vbus_pin_optimus: usb3_vbus_pin@1 { + allwinner,pins = "PH5"; + allwinner,function = "gpio_out"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + }; }; &mmc0 { @@ -134,6 +174,12 @@ status = "okay"; }; +®_usb1_vbus { + pinctrl-0 = <&usb1_vbus_pin_optimus>; + gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */ + status = "okay"; +}; + &uart0 { pinctrl-names = "default"; pinctrl-0 = <&uart0_pins_a>; @@ -150,3 +196,17 @@ /* Enable internal pull-up */ allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; }; + +&usbphy1 { + phy-supply = <®_usb1_vbus>; + status = "okay"; +}; + +&usbphy2 { + status = "okay"; +}; + +&usbphy3 { + phy-supply = <®_usb3_vbus>; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/sun9i-a80.dtsi b/arch/arm/boot/dts/sun9i-a80.dtsi index f0f6fb91f..a43ad779e 100644 --- a/arch/arm/boot/dts/sun9i-a80.dtsi +++ b/arch/arm/boot/dts/sun9i-a80.dtsi @@ -18,11 +18,6 @@ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * You should have received a copy of the GNU General Public - * License along with this file; if not, write to the Free - * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, - * MA 02110-1301 USA - * * Or, alternatively, * * b) Permission is hereby granted, free of charge, to any person @@ -114,6 +109,16 @@ reg = <0 0x20000000 0x02 0>; }; + timer { + compatible = "arm,armv7-timer"; + interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>; + clock-frequency = <24000000>; + arm,cpu-registers-not-fw-configured; + }; + clocks { #address-cells = <1>; #size-cells = <1>; @@ -137,6 +142,28 @@ clock-output-names = "osc32k"; }; + usb_mod_clk: clk@00a08000 { + #clock-cells = <1>; + #reset-cells = <1>; + compatible = "allwinner,sun9i-a80-usb-mod-clk"; + reg = <0x00a08000 0x4>; + clocks = <&ahb1_gates 1>; + clock-output-names = "usb0_ahb", "usb_ohci0", + "usb1_ahb", "usb_ohci1", + "usb2_ahb", "usb_ohci2"; + }; + + usb_phy_clk: clk@00a08004 { + #clock-cells = <1>; + #reset-cells = <1>; + compatible = "allwinner,sun9i-a80-usb-phy-clk"; + reg = <0x00a08004 0x4>; + clocks = <&ahb1_gates 1>; + clock-output-names = "usb_phy0", "usb_hsic1_480M", + "usb_phy1", "usb_hsic2_480M", + "usb_phy2", "usb_hsic_12M"; + }; + pll4: clk@0600000c { #clock-cells = <0>; compatible = "allwinner,sun9i-a80-pll4-clk"; @@ -257,7 +284,7 @@ "ahb0_ss", "ahb0_sd", "ahb0_nand1", "ahb0_nand0", "ahb0_sdram", "ahb0_mipi_hsi", "ahb0_sata", "ahb0_ts", - "ahb0_spi0","ahb0_spi1", "ahb0_spi2", + "ahb0_spi0", "ahb0_spi1", "ahb0_spi2", "ahb0_spi3"; }; @@ -323,6 +350,98 @@ */ ranges = <0 0 0 0x20000000>; + ehci0: usb@00a00000 { + compatible = "allwinner,sun9i-a80-ehci", "generic-ehci"; + reg = <0x00a00000 0x100>; + interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&usb_mod_clk 1>; + resets = <&usb_mod_clk 17>; + phys = <&usbphy1>; + phy-names = "usb"; + status = "disabled"; + }; + + ohci0: usb@00a00400 { + compatible = "allwinner,sun9i-a80-ohci", "generic-ohci"; + reg = <0x00a00400 0x100>; + interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&usb_mod_clk 1>, <&usb_mod_clk 2>; + resets = <&usb_mod_clk 17>; + phys = <&usbphy1>; + phy-names = "usb"; + status = "disabled"; + }; + + usbphy1: phy@00a00800 { + compatible = "allwinner,sun9i-a80-usb-phy"; + reg = <0x00a00800 0x4>; + clocks = <&usb_phy_clk 1>; + clock-names = "phy"; + resets = <&usb_phy_clk 17>; + reset-names = "phy"; + status = "disabled"; + #phy-cells = <0>; + }; + + ehci1: usb@00a01000 { + compatible = "allwinner,sun9i-a80-ehci", "generic-ehci"; + reg = <0x00a01000 0x100>; + interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&usb_mod_clk 3>; + resets = <&usb_mod_clk 18>; + phys = <&usbphy2>; + phy-names = "usb"; + status = "disabled"; + }; + + usbphy2: phy@00a01800 { + compatible = "allwinner,sun9i-a80-usb-phy"; + reg = <0x00a01800 0x4>; + clocks = <&usb_phy_clk 2>, <&usb_phy_clk 10>, + <&usb_phy_clk 3>; + clock-names = "hsic_480M", "hsic_12M", "phy"; + resets = <&usb_phy_clk 18>, <&usb_phy_clk 19>; + reset-names = "hsic", "phy"; + status = "disabled"; + #phy-cells = <0>; + /* usb1 is always used with HSIC */ + phy_type = "hsic"; + }; + + ehci2: usb@00a02000 { + compatible = "allwinner,sun9i-a80-ehci", "generic-ehci"; + reg = <0x00a02000 0x100>; + interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&usb_mod_clk 5>; + resets = <&usb_mod_clk 19>; + phys = <&usbphy3>; + phy-names = "usb"; + status = "disabled"; + }; + + ohci2: usb@00a02400 { + compatible = "allwinner,sun9i-a80-ohci", "generic-ohci"; + reg = <0x00a02400 0x100>; + interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&usb_mod_clk 5>, <&usb_mod_clk 6>; + resets = <&usb_mod_clk 19>; + phys = <&usbphy3>; + phy-names = "usb"; + status = "disabled"; + }; + + usbphy3: phy@00a02800 { + compatible = "allwinner,sun9i-a80-usb-phy"; + reg = <0x00a02800 0x4>; + clocks = <&usb_phy_clk 4>, <&usb_phy_clk 10>, + <&usb_phy_clk 5>; + clock-names = "hsic_480M", "hsic_12M", "phy"; + resets = <&usb_phy_clk 20>, <&usb_phy_clk 21>; + reset-names = "hsic", "phy"; + status = "disabled"; + #phy-cells = <0>; + }; + mmc0: mmc@01c0f000 { compatible = "allwinner,sun5i-a13-mmc"; reg = <0x01c0f000 0x1000>; @@ -333,6 +452,8 @@ reset-names = "ahb"; interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>; status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; }; mmc1: mmc@01c10000 { @@ -345,6 +466,8 @@ reset-names = "ahb"; interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>; status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; }; mmc2: mmc@01c11000 { @@ -357,6 +480,8 @@ reset-names = "ahb"; interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>; status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; }; mmc3: mmc@01c12000 { @@ -369,6 +494,8 @@ reset-names = "ahb"; interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>; status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; }; mmc_config_clk: clk@01c13000 { @@ -438,6 +565,12 @@ clocks = <&osc24M>; }; + wdt: watchdog@06000ca0 { + compatible = "allwinner,sun6i-a31-wdt"; + reg = <0x06000ca0 0x20>; + interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>; + }; + pio: pinctrl@06000800 { compatible = "allwinner,sun9i-a80-pinctrl"; reg = <0x06000800 0x400>; diff --git a/arch/arm/boot/dts/sunxi-common-regulators.dtsi b/arch/arm/boot/dts/sunxi-common-regulators.dtsi index e02baa66b..51cc8383f 100644 --- a/arch/arm/boot/dts/sunxi-common-regulators.dtsi +++ b/arch/arm/boot/dts/sunxi-common-regulators.dtsi @@ -18,11 +18,6 @@ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * You should have received a copy of the GNU General Public - * License along with this file; if not, write to the Free - * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, - * MA 02110-1301 USA - * * Or, alternatively, * * b) Permission is hereby granted, free of charge, to any person diff --git a/arch/arm/boot/dts/tegra124-jetson-tk1.dts b/arch/arm/boot/dts/tegra124-jetson-tk1.dts index ed8a8acd3..bd43ed6d6 100644 --- a/arch/arm/boot/dts/tegra124-jetson-tk1.dts +++ b/arch/arm/boot/dts/tegra124-jetson-tk1.dts @@ -1647,6 +1647,10 @@ target-12v-supply = <&vdd_12v0_sata>; }; + hda@0,70030000 { + status = "okay"; + }; + padctl@0,7009f000 { pinctrl-0 = <&padctl_default>; pinctrl-names = "default"; diff --git a/arch/arm/boot/dts/tegra124-venice2.dts b/arch/arm/boot/dts/tegra124-venice2.dts index 5c3f78133..79e724bb7 100644 --- a/arch/arm/boot/dts/tegra124-venice2.dts +++ b/arch/arm/boot/dts/tegra124-venice2.dts @@ -899,6 +899,7 @@ sdhci@0,700b0600 { status = "okay"; bus-width = <8>; + non-removable; }; ahub@0,70300000 { @@ -1040,6 +1041,8 @@ compatible = "regulator-fixed"; reg = <5>; regulator-name = "+VDD_LED"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; gpio = <&gpio TEGRA_GPIO(P, 2) GPIO_ACTIVE_HIGH>; enable-active-high; vin-supply = <&vdd_mux>; diff --git a/arch/arm/boot/dts/tegra124.dtsi b/arch/arm/boot/dts/tegra124.dtsi index 13cc7ca5e..01a9f742b 100644 --- a/arch/arm/boot/dts/tegra124.dtsi +++ b/arch/arm/boot/dts/tegra124.dtsi @@ -300,7 +300,7 @@ apbmisc@0,70000800 { compatible = "nvidia,tegra124-apbmisc", "nvidia,tegra20-apbmisc"; reg = <0x0 0x70000800 0x0 0x64>, /* Chip revision */ - <0x0 0x7000E864 0x0 0x04>; /* Strapping options */ + <0x0 0x7000e864 0x0 0x04>; /* Strapping options */ }; pinmux: pinmux@0,70000868 { @@ -633,11 +633,11 @@ clocks = <&tegra_car TEGRA124_CLK_HDA>, <&tegra_car TEGRA124_CLK_HDA2HDMI>, <&tegra_car TEGRA124_CLK_HDA2CODEC_2X>; - clock-names = "hda", "hda2hdmi", "hdacodec_2x"; + clock-names = "hda", "hda2hdmi", "hda2codec_2x"; resets = <&tegra_car 125>, /* hda */ <&tegra_car 128>, /* hda2hdmi */ <&tegra_car 111>; /* hda2codec_2x */ - reset-names = "hda", "hda2hdmi", "hdacodec_2x"; + reset-names = "hda", "hda2hdmi", "hda2codec_2x"; status = "disabled"; }; diff --git a/arch/arm/boot/dts/tegra20-seaboard.dts b/arch/arm/boot/dts/tegra20-seaboard.dts index e2fed2712..aea8994b3 100644 --- a/arch/arm/boot/dts/tegra20-seaboard.dts +++ b/arch/arm/boot/dts/tegra20-seaboard.dts @@ -31,6 +31,7 @@ vdd-supply = <&hdmi_vdd_reg>; pll-supply = <&hdmi_pll_reg>; + hdmi-supply = <&vdd_hdmi>; nvidia,ddc-i2c-bus = <&hdmi_ddc>; nvidia,hpd-gpio = <&gpio TEGRA_GPIO(N, 7) @@ -893,6 +894,17 @@ gpio = <&gpio TEGRA_GPIO(W, 0) GPIO_ACTIVE_HIGH>; enable-active-high; }; + + vdd_hdmi: regulator@6 { + compatible = "regulator-fixed"; + reg = <6>; + regulator-name = "VDDIO_HDMI"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio TEGRA_GPIO(V, 5) GPIO_ACTIVE_HIGH>; + enable-active-high; + vin-supply = <&vdd_5v0_reg>; + }; }; sound { diff --git a/arch/arm/boot/dts/tegra20.dtsi b/arch/arm/boot/dts/tegra20.dtsi index adf6b048d..f444b67f5 100644 --- a/arch/arm/boot/dts/tegra20.dtsi +++ b/arch/arm/boot/dts/tegra20.dtsi @@ -563,7 +563,7 @@ fuse@7000f800 { compatible = "nvidia,tegra20-efuse"; - reg = <0x7000F800 0x400>; + reg = <0x7000f800 0x400>; clocks = <&tegra_car TEGRA20_CLK_FUSE>; clock-names = "fuse"; resets = <&tegra_car 39>; diff --git a/arch/arm/boot/dts/tegra30-cardhu.dtsi b/arch/arm/boot/dts/tegra30-cardhu.dtsi index a1b682ea0..bb1ca1582 100644 --- a/arch/arm/boot/dts/tegra30-cardhu.dtsi +++ b/arch/arm/boot/dts/tegra30-cardhu.dtsi @@ -1,3 +1,4 @@ +#include <dt-bindings/input/input.h> #include "tegra30.dtsi" /** @@ -12,7 +13,7 @@ * tegra30-cardhu-a04.dts. * The identification of board is done in two ways, by looking the sticker * on PCB and by reading board id eeprom. - * The stciker will have number like 600-81291-1000-002 C.3. In this 4th + * The sticker will have number like 600-81291-1000-002 C.3. In this 4th * number is the fab version like here it is 002 and hence fab version A02. * The (downstream internal) U-Boot of Cardhu display the board-id as * follows: @@ -615,4 +616,31 @@ <&tegra_car TEGRA30_CLK_EXTERN1>; clock-names = "pll_a", "pll_a_out0", "mclk"; }; + + gpio-keys { + compatible = "gpio-keys"; + + power { + label = "Power"; + interrupt-parent = <&pmic>; + interrupts = <2 0>; + linux,code = <KEY_POWER>; + debounce-interval = <100>; + gpio-key,wakeup; + }; + + volume-down { + label = "Volume Down"; + gpios = <&gpio TEGRA_GPIO(R, 0) GPIO_ACTIVE_LOW>; + linux,code = <KEY_VOLUMEDOWN>; + debounce-interval = <10>; + }; + + volume-up { + label = "Volume Up"; + gpios = <&gpio TEGRA_GPIO(R, 1) GPIO_ACTIVE_LOW>; + linux,code = <KEY_VOLUMEUP>; + debounce-interval = <10>; + }; + }; }; diff --git a/arch/arm/boot/dts/tegra30.dtsi b/arch/arm/boot/dts/tegra30.dtsi index 60e205a0f..782b11b2a 100644 --- a/arch/arm/boot/dts/tegra30.dtsi +++ b/arch/arm/boot/dts/tegra30.dtsi @@ -654,6 +654,21 @@ reset-names = "fuse"; }; + hda@70030000 { + compatible = "nvidia,tegra30-hda"; + reg = <0x70030000 0x10000>; + interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&tegra_car TEGRA30_CLK_HDA>, + <&tegra_car TEGRA30_CLK_HDA2HDMI>, + <&tegra_car TEGRA30_CLK_HDA2CODEC_2X>; + clock-names = "hda", "hda2hdmi", "hda2codec_2x"; + resets = <&tegra_car 125>, /* hda */ + <&tegra_car 128>, /* hda2hdmi */ + <&tegra_car 111>; /* hda2codec_2x */ + reset-names = "hda", "hda2hdmi", "hda2codec_2x"; + status = "disabled"; + }; + ahub@70080000 { compatible = "nvidia,tegra30-ahub"; reg = <0x70080000 0x200 diff --git a/arch/arm/boot/dts/uniphier-ph1-ld4-ref.dts b/arch/arm/boot/dts/uniphier-ph1-ld4-ref.dts new file mode 100644 index 000000000..200b0c99e --- /dev/null +++ b/arch/arm/boot/dts/uniphier-ph1-ld4-ref.dts @@ -0,0 +1,79 @@ +/* + * Device Tree Source for UniPhier PH1-LD4 Reference Board + * + * Copyright (C) 2015 Masahiro Yamada <yamada.masahiro@socionext.com> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; +/include/ "uniphier-ph1-ld4.dtsi" +/include/ "uniphier-support-card.dtsi" + +/ { + model = "UniPhier PH1-LD4 Reference Board"; + compatible = "socionext,ph1-ld4-ref", "socionext,ph1-ld4"; + + memory { + device_type = "memory"; + reg = <0x80000000 0x20000000>; + }; + + chosen { + bootargs = "console=ttyS0,115200"; + stdout-path = &serialsc; + }; + + aliases { + serial0 = &serialsc; + }; +}; + +&extbus { + ranges = <0 0x00000000 0x0f000000 0x01000000 + 1 0x00000000 0x00000000 0x08000000>; +}; + +&support_card { + ranges = <0x00000000 1 0x03f00000 0x00100000>; +}; + +&serialsc { + interrupts = <0 49 4>; +}; diff --git a/arch/arm/boot/dts/uniphier-ph1-ld4.dtsi b/arch/arm/boot/dts/uniphier-ph1-ld4.dtsi new file mode 100644 index 000000000..6a34c56e4 --- /dev/null +++ b/arch/arm/boot/dts/uniphier-ph1-ld4.dtsi @@ -0,0 +1,110 @@ +/* + * Device Tree Source for UniPhier PH1-LD4 SoC + * + * Copyright (C) 2015 Masahiro Yamada <yamada.masahiro@socionext.com> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/include/ "skeleton.dtsi" + +/ { + compatible = "socionext,ph1-ld4"; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a9"; + reg = <0>; + }; + }; + + clocks { + arm_timer_clk: arm_timer_clk { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <50000000>; + }; + }; + + soc { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + interrupt-parent = <&intc>; + + extbus: extbus { + compatible = "simple-bus"; + #address-cells = <2>; + #size-cells = <1>; + }; + + system-bus-controller-misc@59800000 { + compatible = "socionext,uniphier-system-bus-controller-misc", + "syscon"; + reg = <0x59800000 0x2000>; + }; + + timer@60000200 { + compatible = "arm,cortex-a9-global-timer"; + reg = <0x60000200 0x20>; + interrupts = <1 11 0x104>; + clocks = <&arm_timer_clk>; + }; + + timer@60000600 { + compatible = "arm,cortex-a9-twd-timer"; + reg = <0x60000600 0x20>; + interrupts = <1 13 0x104>; + clocks = <&arm_timer_clk>; + }; + + intc: interrupt-controller@60001000 { + compatible = "arm,cortex-a9-gic"; + #interrupt-cells = <3>; + interrupt-controller; + reg = <0x60001000 0x1000>, + <0x60000100 0x100>; + }; + }; +}; diff --git a/arch/arm/boot/dts/uniphier-ph1-pro4-ref.dts b/arch/arm/boot/dts/uniphier-ph1-pro4-ref.dts new file mode 100644 index 000000000..d891135a7 --- /dev/null +++ b/arch/arm/boot/dts/uniphier-ph1-pro4-ref.dts @@ -0,0 +1,79 @@ +/* + * Device Tree Source for UniPhier PH1-Pro4 Reference Board + * + * Copyright (C) 2015 Masahiro Yamada <yamada.masahiro@socionext.com> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; +/include/ "uniphier-ph1-pro4.dtsi" +/include/ "uniphier-support-card.dtsi" + +/ { + model = "UniPhier PH1-Pro4 Reference Board"; + compatible = "socionext,ph1-pro4-ref", "socionext,ph1-pro4"; + + memory { + device_type = "memory"; + reg = <0x80000000 0x40000000>; + }; + + chosen { + bootargs = "console=ttyS0,115200"; + stdout-path = &serialsc; + }; + + aliases { + serial0 = &serialsc; + }; +}; + +&extbus { + ranges = <0 0x00000000 0x0f000000 0x01000000 + 1 0x00000000 0x00000000 0x08000000>; +}; + +&support_card { + ranges = <0x00000000 1 0x03f00000 0x00100000>; +}; + +&serialsc { + interrupts = <0 50 4>; +}; diff --git a/arch/arm/boot/dts/uniphier-ph1-pro4.dtsi b/arch/arm/boot/dts/uniphier-ph1-pro4.dtsi new file mode 100644 index 000000000..dc633603a --- /dev/null +++ b/arch/arm/boot/dts/uniphier-ph1-pro4.dtsi @@ -0,0 +1,117 @@ +/* + * Device Tree Source for UniPhier PH1-Pro4 SoC + * + * Copyright (C) 2015 Masahiro Yamada <yamada.masahiro@socionext.com> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/include/ "skeleton.dtsi" + +/ { + compatible = "socionext,ph1-pro4"; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + enable-method = "socionext,uniphier-smp"; + + cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a9"; + reg = <0>; + }; + + cpu@1 { + device_type = "cpu"; + compatible = "arm,cortex-a9"; + reg = <1>; + }; + }; + + clocks { + arm_timer_clk: arm_timer_clk { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <50000000>; + }; + }; + + soc { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + interrupt-parent = <&intc>; + + extbus: extbus { + compatible = "simple-bus"; + #address-cells = <2>; + #size-cells = <1>; + }; + + system-bus-controller-misc@59800000 { + compatible = "socionext,uniphier-system-bus-controller-misc", + "syscon"; + reg = <0x59800000 0x2000>; + }; + + timer@60000200 { + compatible = "arm,cortex-a9-global-timer"; + reg = <0x60000200 0x20>; + interrupts = <1 11 0x304>; + clocks = <&arm_timer_clk>; + }; + + timer@60000600 { + compatible = "arm,cortex-a9-twd-timer"; + reg = <0x60000600 0x20>; + interrupts = <1 13 0x304>; + clocks = <&arm_timer_clk>; + }; + + intc: interrupt-controller@60001000 { + compatible = "arm,cortex-a9-gic"; + #interrupt-cells = <3>; + interrupt-controller; + reg = <0x60001000 0x1000>, + <0x60000100 0x100>; + }; + }; +}; diff --git a/arch/arm/boot/dts/uniphier-ph1-sld3-ref.dts b/arch/arm/boot/dts/uniphier-ph1-sld3-ref.dts new file mode 100644 index 000000000..3ea64ae00 --- /dev/null +++ b/arch/arm/boot/dts/uniphier-ph1-sld3-ref.dts @@ -0,0 +1,80 @@ +/* + * Device Tree Source for UniPhier PH1-sLD3 Reference Board + * + * Copyright (C) 2015 Masahiro Yamada <yamada.masahiro@socionext.com> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; +/include/ "uniphier-ph1-sld3.dtsi" +/include/ "uniphier-support-card.dtsi" + +/ { + model = "UniPhier PH1-sLD3 Reference Board"; + compatible = "socionext,ph1-sld3-ref", "socionext,ph1-sld3"; + + memory { + device_type = "memory"; + reg = <0x80000000 0x20000000 + 0xc0000000 0x20000000>; + }; + + chosen { + bootargs = "console=ttyS0,115200"; + stdout-path = &serialsc; + }; + + aliases { + serial0 = &serialsc; + }; +}; + +&extbus { + ranges = <0 0x00000000 0x0f000000 0x01000000 + 1 0x00000000 0x00000000 0x08000000>; +}; + +&support_card { + ranges = <0x00000000 1 0x03f00000 0x00100000>; +}; + +&serialsc { + interrupts = <0 49 4>; +}; diff --git a/arch/arm/boot/dts/uniphier-ph1-sld3.dtsi b/arch/arm/boot/dts/uniphier-ph1-sld3.dtsi new file mode 100644 index 000000000..248b18868 --- /dev/null +++ b/arch/arm/boot/dts/uniphier-ph1-sld3.dtsi @@ -0,0 +1,117 @@ +/* + * Device Tree Source for UniPhier PH1-sLD3 SoC + * + * Copyright (C) 2015 Masahiro Yamada <yamada.masahiro@socionext.com> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/include/ "skeleton.dtsi" + +/ { + compatible = "socionext,ph1-sld3"; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + enable-method = "socionext,uniphier-smp"; + + cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a9"; + reg = <0>; + }; + + cpu@1 { + device_type = "cpu"; + compatible = "arm,cortex-a9"; + reg = <1>; + }; + }; + + clocks { + arm_timer_clk: arm_timer_clk { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <50000000>; + }; + }; + + soc { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + interrupt-parent = <&intc>; + + extbus: extbus { + compatible = "simple-bus"; + #address-cells = <2>; + #size-cells = <1>; + }; + + timer@20000200 { + compatible = "arm,cortex-a9-global-timer"; + reg = <0x20000200 0x20>; + interrupts = <1 11 0x304>; + clocks = <&arm_timer_clk>; + }; + + timer@20000600 { + compatible = "arm,cortex-a9-twd-timer"; + reg = <0x20000600 0x20>; + interrupts = <1 13 0x304>; + clocks = <&arm_timer_clk>; + }; + + intc: interrupt-controller@20001000 { + compatible = "arm,cortex-a9-gic"; + #interrupt-cells = <3>; + interrupt-controller; + reg = <0x20001000 0x1000>, + <0x20000100 0x100>; + }; + + system-bus-controller-misc@59800000 { + compatible = "socionext,uniphier-system-bus-controller-misc", + "syscon"; + reg = <0x59800000 0x2000>; + }; + }; +}; diff --git a/arch/arm/boot/dts/uniphier-ph1-sld8-ref.dts b/arch/arm/boot/dts/uniphier-ph1-sld8-ref.dts new file mode 100644 index 000000000..dcdc4f743 --- /dev/null +++ b/arch/arm/boot/dts/uniphier-ph1-sld8-ref.dts @@ -0,0 +1,79 @@ +/* + * Device Tree Source for UniPhier PH1-sLD8 Reference Board + * + * Copyright (C) 2015 Masahiro Yamada <yamada.masahiro@socionext.com> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; +/include/ "uniphier-ph1-sld8.dtsi" +/include/ "uniphier-support-card.dtsi" + +/ { + model = "UniPhier PH1-sLD8 Reference Board"; + compatible = "socionext,ph1-sld8-ref", "socionext,ph1-sld8"; + + memory { + device_type = "memory"; + reg = <0x80000000 0x20000000>; + }; + + chosen { + bootargs = "console=ttyS0,115200"; + stdout-path = &serialsc; + }; + + aliases { + serial0 = &serialsc; + }; +}; + +&extbus { + ranges = <0 0x00000000 0x0f000000 0x01000000 + 1 0x00000000 0x00000000 0x08000000>; +}; + +&support_card { + ranges = <0x00000000 1 0x03f00000 0x00100000>; +}; + +&serialsc { + interrupts = <0 48 4>; +}; diff --git a/arch/arm/boot/dts/uniphier-ph1-sld8.dtsi b/arch/arm/boot/dts/uniphier-ph1-sld8.dtsi new file mode 100644 index 000000000..baa71e1fe --- /dev/null +++ b/arch/arm/boot/dts/uniphier-ph1-sld8.dtsi @@ -0,0 +1,110 @@ +/* + * Device Tree Source for UniPhier PH1-sLD8 SoC + * + * Copyright (C) 2015 Masahiro Yamada <yamada.masahiro@socionext.com> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/include/ "skeleton.dtsi" + +/ { + compatible = "socionext,ph1-sld8"; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a9"; + reg = <0>; + }; + }; + + clocks { + arm_timer_clk: arm_timer_clk { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <50000000>; + }; + }; + + soc { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + interrupt-parent = <&intc>; + + extbus: extbus { + compatible = "simple-bus"; + #address-cells = <2>; + #size-cells = <1>; + }; + + system-bus-controller-misc@59800000 { + compatible = "socionext,uniphier-system-bus-controller-misc", + "syscon"; + reg = <0x59800000 0x2000>; + }; + + timer@60000200 { + compatible = "arm,cortex-a9-global-timer"; + reg = <0x60000200 0x20>; + interrupts = <1 11 0x104>; + clocks = <&arm_timer_clk>; + }; + + timer@60000600 { + compatible = "arm,cortex-a9-twd-timer"; + reg = <0x60000600 0x20>; + interrupts = <1 13 0x104>; + clocks = <&arm_timer_clk>; + }; + + intc: interrupt-controller@60001000 { + compatible = "arm,cortex-a9-gic"; + #interrupt-cells = <3>; + interrupt-controller; + reg = <0x60001000 0x1000>, + <0x60000100 0x100>; + }; + }; +}; diff --git a/arch/arm/boot/dts/uniphier-support-card.dtsi b/arch/arm/boot/dts/uniphier-support-card.dtsi new file mode 100644 index 000000000..da271e3b9 --- /dev/null +++ b/arch/arm/boot/dts/uniphier-support-card.dtsi @@ -0,0 +1,65 @@ +/* + * Device Tree Source for UniPhier Support Card (Expansion Board) + * + * Copyright (C) 2015 Masahiro Yamada <yamada.masahiro@socionext.com> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +&extbus { + support_card: support_card { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + + ethsc: ethernet@00000000 { + compatible = "smsc,lan9118", "smsc,lan9115"; + reg = <0x00000000 0x1000>; + phy-mode = "mii"; + reg-io-width = <4>; + }; + + serialsc: uart@000b0000 { + compatible = "ns16550a"; + reg = <0x000b0000 0x20>; + clock-frequency = <12288000>; + reg-shift = <1>; + }; + }; +}; diff --git a/arch/arm/boot/dts/vexpress-v2p-ca15_a7.dts b/arch/arm/boot/dts/vexpress-v2p-ca15_a7.dts index 107395c32..17f63f7df 100644 --- a/arch/arm/boot/dts/vexpress-v2p-ca15_a7.dts +++ b/arch/arm/boot/dts/vexpress-v2p-ca15_a7.dts @@ -150,6 +150,16 @@ interface-type = "ace"; reg = <0x5000 0x1000>; }; + + pmu@9000 { + compatible = "arm,cci-400-pmu,r0"; + reg = <0x9000 0x5000>; + interrupts = <0 105 4>, + <0 101 4>, + <0 102 4>, + <0 103 4>, + <0 104 4>; + }; }; memory-controller@7ffd0000 { @@ -187,11 +197,22 @@ <1 10 0xf08>; }; - pmu { + pmu_a15 { compatible = "arm,cortex-a15-pmu"; interrupts = <0 68 4>, <0 69 4>; - interrupt-affinity = <&cpu0>, <&cpu1>; + interrupt-affinity = <&cpu0>, + <&cpu1>; + }; + + pmu_a7 { + compatible = "arm,cortex-a7-pmu"; + interrupts = <0 128 4>, + <0 129 4>, + <0 130 4>; + interrupt-affinity = <&cpu2>, + <&cpu3>, + <&cpu4>; }; oscclk6a: oscclk6a { diff --git a/arch/arm/boot/dts/vf-colibri.dtsi b/arch/arm/boot/dts/vf-colibri.dtsi index fbef0828e..68ca125b5 100644 --- a/arch/arm/boot/dts/vf-colibri.dtsi +++ b/arch/arm/boot/dts/vf-colibri.dtsi @@ -140,7 +140,7 @@ VF610_PAD_PTC9__ENET_RMII1_MDC 0x30d2 VF610_PAD_PTC10__ENET_RMII1_MDIO 0x30d3 VF610_PAD_PTC11__ENET_RMII1_CRS 0x30d1 - VF610_PAD_PTC12__ENET_RMII_RXD1 0x30d1 + VF610_PAD_PTC12__ENET_RMII1_RXD1 0x30d1 VF610_PAD_PTC13__ENET_RMII1_RXD0 0x30d1 VF610_PAD_PTC14__ENET_RMII1_RXER 0x30d1 VF610_PAD_PTC15__ENET_RMII1_TXD1 0x30d2 diff --git a/arch/arm/boot/dts/vf610-cosmic.dts b/arch/arm/boot/dts/vf610-cosmic.dts index fd8758b63..5447f2594 100644 --- a/arch/arm/boot/dts/vf610-cosmic.dts +++ b/arch/arm/boot/dts/vf610-cosmic.dts @@ -68,7 +68,7 @@ VF610_PAD_PTC9__ENET_RMII1_MDC 0x30d2 VF610_PAD_PTC10__ENET_RMII1_MDIO 0x30d3 VF610_PAD_PTC11__ENET_RMII1_CRS 0x30d1 - VF610_PAD_PTC12__ENET_RMII_RXD1 0x30d1 + VF610_PAD_PTC12__ENET_RMII1_RXD1 0x30d1 VF610_PAD_PTC13__ENET_RMII1_RXD0 0x30d1 VF610_PAD_PTC14__ENET_RMII1_RXER 0x30d1 VF610_PAD_PTC15__ENET_RMII1_TXD1 0x30d2 diff --git a/arch/arm/boot/dts/vf610-pinfunc.h b/arch/arm/boot/dts/vf610-pinfunc.h index 1ee681f7c..fcad7132c 100644 --- a/arch/arm/boot/dts/vf610-pinfunc.h +++ b/arch/arm/boot/dts/vf610-pinfunc.h @@ -369,7 +369,7 @@ #define VF610_PAD_PTC11__MLB_DATA 0x0E0 0x358 ALT6 0x1 #define VF610_PAD_PTC11__DEBUG_OUT 0x0E0 0x000 ALT7 0x0 #define VF610_PAD_PTC12__GPIO_57 0x0E4 0x000 ALT0 0x0 -#define VF610_PAD_PTC12__ENET_RMII_RXD1 0x0E4 0x000 ALT1 0x0 +#define VF610_PAD_PTC12__ENET_RMII1_RXD1 0x0E4 0x000 ALT1 0x0 #define VF610_PAD_PTC12__ESAI_SDO1 0x0E4 0x318 ALT3 0x1 #define VF610_PAD_PTC12__SAI2_TX_BCLK 0x0E4 0x370 ALT5 0x1 #define VF610_PAD_PTC12__DEBUG_OUT3 0x0E4 0x000 ALT7 0x0 diff --git a/arch/arm/boot/dts/vf610-twr.dts b/arch/arm/boot/dts/vf610-twr.dts index f64fddce3..375ab23ca 100644 --- a/arch/arm/boot/dts/vf610-twr.dts +++ b/arch/arm/boot/dts/vf610-twr.dts @@ -221,7 +221,7 @@ VF610_PAD_PTC9__ENET_RMII1_MDC 0x30d2 VF610_PAD_PTC10__ENET_RMII1_MDIO 0x30d3 VF610_PAD_PTC11__ENET_RMII1_CRS 0x30d1 - VF610_PAD_PTC12__ENET_RMII_RXD1 0x30d1 + VF610_PAD_PTC12__ENET_RMII1_RXD1 0x30d1 VF610_PAD_PTC13__ENET_RMII1_RXD0 0x30d1 VF610_PAD_PTC14__ENET_RMII1_RXER 0x30d1 VF610_PAD_PTC15__ENET_RMII1_TXD1 0x30d2 diff --git a/arch/arm/boot/dts/vf610m4-colibri.dts b/arch/arm/boot/dts/vf610m4-colibri.dts new file mode 100644 index 000000000..2931a80ca --- /dev/null +++ b/arch/arm/boot/dts/vf610m4-colibri.dts @@ -0,0 +1,99 @@ +/* + * Device tree for Colibri VF61 Cortex-M4 support + * + * Copyright (C) 2015 Stefan Agner + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; +#include "vf610m4.dtsi" + +/ { + model = "VF610 Cortex-M4"; + compatible = "fsl,vf610m4"; + + chosen { + bootargs = "console=ttyLP2,115200 clk_ignore_unused init=/linuxrc rw"; + linux,stdout-path = "&uart2"; + }; + + memory { + reg = <0x8c000000 0x3000000>; + }; +}; + +&gpio0 { + status = "disabled"; +}; + +&gpio1 { + status = "disabled"; +}; + +&gpio2 { + status = "disabled"; +}; + +&gpio3 { + status = "disabled"; +}; + +&gpio4 { + status = "disabled"; +}; + +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart2>; + status = "okay"; +}; + +&iomuxc { + vf610-colibri { + pinctrl_uart2: uart2grp { + fsl,pins = < + VF610_PAD_PTD0__UART2_TX 0x21a2 + VF610_PAD_PTD1__UART2_RX 0x21a1 + VF610_PAD_PTD2__UART2_RTS 0x21a2 + VF610_PAD_PTD3__UART2_CTS 0x21a1 + >; + }; + }; +}; diff --git a/arch/arm/boot/dts/vf610m4.dtsi b/arch/arm/boot/dts/vf610m4.dtsi new file mode 100644 index 000000000..9ffe2eb68 --- /dev/null +++ b/arch/arm/boot/dts/vf610m4.dtsi @@ -0,0 +1,50 @@ +/* + * Device tree for VF6xx Cortex-M4 support + * + * Copyright (C) 2015 Stefan Agner + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +#include "armv7-m.dtsi" +#include "vfxxx.dtsi" + +&mscm_ir { + interrupt-parent = <&nvic>; +}; diff --git a/arch/arm/boot/dts/zx296702-ad1.dts b/arch/arm/boot/dts/zx296702-ad1.dts new file mode 100644 index 000000000..081f980cf --- /dev/null +++ b/arch/arm/boot/dts/zx296702-ad1.dts @@ -0,0 +1,48 @@ + +/dts-v1/; + +#include "zx296702.dtsi" + +/ { + model = "ZTE ZX296702 AD1 Board"; + compatible = "zte,zx296702-ad1", "zte,zx296702"; + + aliases { + serial0 = &uart0; + serial1 = &uart1; + }; + + memory { + reg = <0x50000000 0x20000000>; + }; +}; + +&mmc0 { + num-slots = <1>; + supports-highspeed; + non-removable; + disable-wp; + status = "okay"; + + slot@0 { + reg = <0>; + bus-width = <4>; + }; +}; + +&mmc1 { + num-slots = <1>; + supports-highspeed; + non-removable; + disable-wp; + status = "okay"; + + slot@0 { + reg = <0>; + bus-width = <8>; + }; +}; + +&uart0 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/zx296702.dtsi b/arch/arm/boot/dts/zx296702.dtsi new file mode 100644 index 000000000..d45c8fcd7 --- /dev/null +++ b/arch/arm/boot/dts/zx296702.dtsi @@ -0,0 +1,139 @@ + +#include "skeleton.dtsi" +#include <dt-bindings/clock/zx296702-clock.h> +#include <dt-bindings/interrupt-controller/arm-gic.h> + +/ { + cpus { + #address-cells = <1>; + #size-cells = <0>; + enable-method = "zte,zx296702-smp"; + + cpu@0 { + compatible = "arm,cortex-a9"; + device_type = "cpu"; + next-level-cache = <&l2cc>; + reg = <0>; + }; + + cpu@1 { + compatible = "arm,cortex-a9"; + device_type = "cpu"; + next-level-cache = <&l2cc>; + reg = <1>; + }; + }; + + + soc { + #address-cells = <1>; + #size-cells = <1>; + compatible = "simple-bus"; + interrupt-parent = <&intc>; + ranges; + + matrix: bus-matrix@400000 { + compatible = "zte,zx-bus-matrix"; + reg = <0x00400000 0x1000>; + }; + + intc: interrupt-controller@00801000 { + compatible = "arm,cortex-a9-gic"; + #interrupt-cells = <3>; + #address-cells = <1>; + #size-cells = <1>; + interrupt-controller; + reg = <0x00801000 0x1000>, + <0x00800100 0x100>; + }; + + global_timer: timer@008000200 { + compatible = "arm,cortex-a9-global-timer"; + reg = <0x00800200 0x20>; + interrupts = <GIC_PPI 11 IRQ_TYPE_LEVEL_HIGH>; + interrupt-parent = <&intc>; + clocks = <&topclk ZX296702_A9_PERIPHCLK>; + }; + + l2cc: l2-cache-controller@0x00c00000 { + compatible = "arm,pl310-cache"; + reg = <0x00c00000 0x1000>; + cache-unified; + cache-level = <2>; + arm,data-latency = <1 1 1>; + arm,tag-latency = <1 1 1>; + arm,double-linefill = <1>; + arm,double-linefill-incr = <0>; + }; + + pcu: pcu@0xa0008000 { + compatible = "zte,zx296702-pcu"; + reg = <0xa0008000 0x1000>; + }; + + topclk: topclk@0x09800000 { + compatible = "zte,zx296702-topcrm-clk"; + reg = <0x09800000 0x1000>; + #clock-cells = <1>; + }; + + lsp1clk: lsp1clk@0x09400000 { + compatible = "zte,zx296702-lsp1crpm-clk"; + reg = <0x09400000 0x1000>; + #clock-cells = <1>; + }; + + lsp0clk: lsp0clk@0x0b000000 { + compatible = "zte,zx296702-lsp0crpm-clk"; + reg = <0x0b000000 0x1000>; + #clock-cells = <1>; + }; + + uart0: serial@0x09405000 { + compatible = "zte,zx296702-uart"; + reg = <0x09405000 0x1000>; + interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&lsp1clk ZX296702_UART0_WCLK>; + status = "disabled"; + }; + + uart1: serial@0x09406000 { + compatible = "zte,zx296702-uart"; + reg = <0x09406000 0x1000>; + interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&lsp1clk ZX296702_UART1_WCLK>; + status = "disabled"; + }; + + mmc0: mmc@0x09408000 { + compatible = "snps,dw-mshc"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x09408000 0x1000>; + interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>; + fifo-depth = <32>; + clocks = <&lsp1clk ZX296702_SDMMC0_PCLK>, + <&lsp1clk ZX296702_SDMMC0_WCLK>; + clock-names = "biu", "ciu"; + status = "disabled"; + }; + + mmc1: mmc@0x0b003000 { + compatible = "snps,dw-mshc"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x0b003000 0x1000>; + interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>; + fifo-depth = <32>; + clocks = <&lsp0clk ZX296702_SDMMC1_PCLK>, + <&lsp0clk ZX296702_SDMMC1_WCLK>; + clock-names = "biu", "ciu"; + status = "disabled"; + }; + + sysctrl: sysctrl@0xa0007000 { + compatible = "zte,sysctrl", "syscon"; + reg = <0xa0007000 0x1000>; + }; + }; +}; diff --git a/arch/arm/boot/dts/zynq-7000.dtsi b/arch/arm/boot/dts/zynq-7000.dtsi index 9ea54b3db..06915080b 100644 --- a/arch/arm/boot/dts/zynq-7000.dtsi +++ b/arch/arm/boot/dts/zynq-7000.dtsi @@ -193,7 +193,7 @@ }; gem0: ethernet@e000b000 { - compatible = "cdns,zynq-gem"; + compatible = "cdns,zynq-gem", "cdns,gem"; reg = <0xe000b000 0x1000>; status = "disabled"; interrupts = <0 22 4>; @@ -204,7 +204,7 @@ }; gem1: ethernet@e000c000 { - compatible = "cdns,zynq-gem"; + compatible = "cdns,zynq-gem", "cdns,gem"; reg = <0xe000c000 0x1000>; status = "disabled"; interrupts = <0 45 4>; diff --git a/arch/arm/boot/dts/zynq-parallella.dts b/arch/arm/boot/dts/zynq-parallella.dts index 174571232..9efd16cb2 100644 --- a/arch/arm/boot/dts/zynq-parallella.dts +++ b/arch/arm/boot/dts/zynq-parallella.dts @@ -23,14 +23,19 @@ model = "Adapteva Parallella Board"; compatible = "adapteva,parallella", "xlnx,zynq-7000"; + aliases { + ethernet0 = &gem0; + serial0 = &uart1; + }; + memory { device_type = "memory"; reg = <0x0 0x40000000>; }; chosen { - bootargs = "console=ttyPS0,115200 earlyprintk root=/dev/mmcblk0p2 rootfstype=ext4 rw rootwait"; - linux,stdout-path = "/amba/serial@e0001000"; + bootargs = "earlyprintk root=/dev/mmcblk0p2 rootfstype=ext4 rw rootwait"; + stdout-path = "serial0:115200n8"; }; }; diff --git a/arch/arm/boot/dts/zynq-zc702.dts b/arch/arm/boot/dts/zynq-zc702.dts index 1fc1d3911..fb59d34e8 100644 --- a/arch/arm/boot/dts/zynq-zc702.dts +++ b/arch/arm/boot/dts/zynq-zc702.dts @@ -30,7 +30,8 @@ }; chosen { - bootargs = "console=ttyPS0,115200 earlyprintk"; + bootargs = "earlyprintk"; + stdout-path = "serial0:115200n8"; }; leds { diff --git a/arch/arm/boot/dts/zynq-zc706.dts b/arch/arm/boot/dts/zynq-zc706.dts index 850518d9b..abf5d238a 100644 --- a/arch/arm/boot/dts/zynq-zc706.dts +++ b/arch/arm/boot/dts/zynq-zc706.dts @@ -30,7 +30,8 @@ }; chosen { - bootargs = "console=ttyPS0,115200 earlyprintk"; + bootargs = "earlyprintk"; + stdout-path = "serial0:115200n8"; }; usb_phy0: phy0 { diff --git a/arch/arm/boot/dts/zynq-zed.dts b/arch/arm/boot/dts/zynq-zed.dts index 5658bc843..b9f252201 100644 --- a/arch/arm/boot/dts/zynq-zed.dts +++ b/arch/arm/boot/dts/zynq-zed.dts @@ -29,7 +29,8 @@ }; chosen { - bootargs = "console=ttyPS0,115200 earlyprintk"; + bootargs = "earlyprintk"; + stdout-path = "serial0:115200n8"; }; usb_phy0: phy0 { diff --git a/arch/arm/boot/dts/zynq-zybo.dts b/arch/arm/boot/dts/zynq-zybo.dts index a9a12ce50..16c9cacd6 100644 --- a/arch/arm/boot/dts/zynq-zybo.dts +++ b/arch/arm/boot/dts/zynq-zybo.dts @@ -18,13 +18,19 @@ model = "Zynq ZYBO Development Board"; compatible = "digilent,zynq-zybo", "xlnx,zynq-7000"; + aliases { + ethernet0 = &gem0; + serial0 = &uart1; + }; + memory { device_type = "memory"; reg = <0x0 0x20000000>; }; chosen { - bootargs = "console=ttyPS0,115200 earlyprintk"; + bootargs = "earlyprintk"; + stdout-path = "serial0:115200n8"; }; }; diff --git a/arch/arm/common/Makefile b/arch/arm/common/Makefile index 70b1eff47..6ee5959a8 100644 --- a/arch/arm/common/Makefile +++ b/arch/arm/common/Makefile @@ -11,7 +11,6 @@ obj-$(CONFIG_SHARP_LOCOMO) += locomo.o obj-$(CONFIG_SHARP_PARAM) += sharpsl_param.o obj-$(CONFIG_SHARP_SCOOP) += scoop.o obj-$(CONFIG_PCI_HOST_ITE8152) += it8152.o -obj-$(CONFIG_ARM_TIMER_SP804) += timer-sp.o obj-$(CONFIG_MCPM) += mcpm_head.o mcpm_entry.o mcpm_platsmp.o vlock.o CFLAGS_REMOVE_mcpm_entry.o = -pg AFLAGS_mcpm_head.o := -march=armv7-a diff --git a/arch/arm/common/edma.c b/arch/arm/common/edma.c index 5662a8726..873dbfcc7 100644 --- a/arch/arm/common/edma.c +++ b/arch/arm/common/edma.c @@ -1350,6 +1350,9 @@ void edma_stop(unsigned channel) edma_shadow0_write_array(ctlr, SH_SECR, j, mask); edma_write_array(ctlr, EDMA_EMCR, j, mask); + /* clear possibly pending completion interrupt */ + edma_shadow0_write_array(ctlr, SH_ICR, j, mask); + pr_debug("EDMA: EER%d %08x\n", j, edma_shadow0_read_array(ctlr, SH_EER, j)); diff --git a/arch/arm/common/mcpm_entry.c b/arch/arm/common/mcpm_entry.c index 5f8a52ac7..a923524d1 100644 --- a/arch/arm/common/mcpm_entry.c +++ b/arch/arm/common/mcpm_entry.c @@ -20,6 +20,126 @@ #include <asm/cputype.h> #include <asm/suspend.h> +/* + * The public API for this code is documented in arch/arm/include/asm/mcpm.h. + * For a comprehensive description of the main algorithm used here, please + * see Documentation/arm/cluster-pm-race-avoidance.txt. + */ + +struct sync_struct mcpm_sync; + +/* + * __mcpm_cpu_going_down: Indicates that the cpu is being torn down. + * This must be called at the point of committing to teardown of a CPU. + * The CPU cache (SCTRL.C bit) is expected to still be active. + */ +static void __mcpm_cpu_going_down(unsigned int cpu, unsigned int cluster) +{ + mcpm_sync.clusters[cluster].cpus[cpu].cpu = CPU_GOING_DOWN; + sync_cache_w(&mcpm_sync.clusters[cluster].cpus[cpu].cpu); +} + +/* + * __mcpm_cpu_down: Indicates that cpu teardown is complete and that the + * cluster can be torn down without disrupting this CPU. + * To avoid deadlocks, this must be called before a CPU is powered down. + * The CPU cache (SCTRL.C bit) is expected to be off. + * However L2 cache might or might not be active. + */ +static void __mcpm_cpu_down(unsigned int cpu, unsigned int cluster) +{ + dmb(); + mcpm_sync.clusters[cluster].cpus[cpu].cpu = CPU_DOWN; + sync_cache_w(&mcpm_sync.clusters[cluster].cpus[cpu].cpu); + sev(); +} + +/* + * __mcpm_outbound_leave_critical: Leave the cluster teardown critical section. + * @state: the final state of the cluster: + * CLUSTER_UP: no destructive teardown was done and the cluster has been + * restored to the previous state (CPU cache still active); or + * CLUSTER_DOWN: the cluster has been torn-down, ready for power-off + * (CPU cache disabled, L2 cache either enabled or disabled). + */ +static void __mcpm_outbound_leave_critical(unsigned int cluster, int state) +{ + dmb(); + mcpm_sync.clusters[cluster].cluster = state; + sync_cache_w(&mcpm_sync.clusters[cluster].cluster); + sev(); +} + +/* + * __mcpm_outbound_enter_critical: Enter the cluster teardown critical section. + * This function should be called by the last man, after local CPU teardown + * is complete. CPU cache expected to be active. + * + * Returns: + * false: the critical section was not entered because an inbound CPU was + * observed, or the cluster is already being set up; + * true: the critical section was entered: it is now safe to tear down the + * cluster. + */ +static bool __mcpm_outbound_enter_critical(unsigned int cpu, unsigned int cluster) +{ + unsigned int i; + struct mcpm_sync_struct *c = &mcpm_sync.clusters[cluster]; + + /* Warn inbound CPUs that the cluster is being torn down: */ + c->cluster = CLUSTER_GOING_DOWN; + sync_cache_w(&c->cluster); + + /* Back out if the inbound cluster is already in the critical region: */ + sync_cache_r(&c->inbound); + if (c->inbound == INBOUND_COMING_UP) + goto abort; + + /* + * Wait for all CPUs to get out of the GOING_DOWN state, so that local + * teardown is complete on each CPU before tearing down the cluster. + * + * If any CPU has been woken up again from the DOWN state, then we + * shouldn't be taking the cluster down at all: abort in that case. + */ + sync_cache_r(&c->cpus); + for (i = 0; i < MAX_CPUS_PER_CLUSTER; i++) { + int cpustate; + + if (i == cpu) + continue; + + while (1) { + cpustate = c->cpus[i].cpu; + if (cpustate != CPU_GOING_DOWN) + break; + + wfe(); + sync_cache_r(&c->cpus[i].cpu); + } + + switch (cpustate) { + case CPU_DOWN: + continue; + + default: + goto abort; + } + } + + return true; + +abort: + __mcpm_outbound_leave_critical(cluster, CLUSTER_UP); + return false; +} + +static int __mcpm_cluster_state(unsigned int cluster) +{ + sync_cache_r(&mcpm_sync.clusters[cluster].cluster); + return mcpm_sync.clusters[cluster].cluster; +} + extern unsigned long mcpm_entry_vectors[MAX_NR_CLUSTERS][MAX_CPUS_PER_CLUSTER]; void mcpm_set_entry_vector(unsigned cpu, unsigned cluster, void *ptr) @@ -78,16 +198,11 @@ int mcpm_cpu_power_up(unsigned int cpu, unsigned int cluster) bool cpu_is_down, cluster_is_down; int ret = 0; + pr_debug("%s: cpu %u cluster %u\n", __func__, cpu, cluster); if (!platform_ops) return -EUNATCH; /* try not to shadow power_up errors */ might_sleep(); - /* backward compatibility callback */ - if (platform_ops->power_up) - return platform_ops->power_up(cpu, cluster); - - pr_debug("%s: cpu %u cluster %u\n", __func__, cpu, cluster); - /* * Since this is called with IRQs enabled, and no arch_spin_lock_irq * variant exists, we need to disable IRQs manually here. @@ -128,29 +243,17 @@ void mcpm_cpu_power_down(void) bool cpu_going_down, last_man; phys_reset_t phys_reset; + mpidr = read_cpuid_mpidr(); + cpu = MPIDR_AFFINITY_LEVEL(mpidr, 0); + cluster = MPIDR_AFFINITY_LEVEL(mpidr, 1); + pr_debug("%s: cpu %u cluster %u\n", __func__, cpu, cluster); if (WARN_ON_ONCE(!platform_ops)) return; BUG_ON(!irqs_disabled()); - /* - * Do this before calling into the power_down method, - * as it might not always be safe to do afterwards. - */ setup_mm_for_reboot(); - /* backward compatibility callback */ - if (platform_ops->power_down) { - platform_ops->power_down(); - goto not_dead; - } - - mpidr = read_cpuid_mpidr(); - cpu = MPIDR_AFFINITY_LEVEL(mpidr, 0); - cluster = MPIDR_AFFINITY_LEVEL(mpidr, 1); - pr_debug("%s: cpu %u cluster %u\n", __func__, cpu, cluster); - __mcpm_cpu_going_down(cpu, cluster); - arch_spin_lock(&mcpm_lock); BUG_ON(__mcpm_cluster_state(cluster) != CLUSTER_UP); @@ -187,7 +290,6 @@ void mcpm_cpu_power_down(void) if (cpu_going_down) wfi(); -not_dead: /* * It is possible for a power_up request to happen concurrently * with a power_down request for the same CPU. In this case the @@ -219,22 +321,11 @@ int mcpm_wait_for_cpu_powerdown(unsigned int cpu, unsigned int cluster) return ret; } -void mcpm_cpu_suspend(u64 expected_residency) +void mcpm_cpu_suspend(void) { if (WARN_ON_ONCE(!platform_ops)) return; - /* backward compatibility callback */ - if (platform_ops->suspend) { - phys_reset_t phys_reset; - BUG_ON(!irqs_disabled()); - setup_mm_for_reboot(); - platform_ops->suspend(expected_residency); - phys_reset = (phys_reset_t)(unsigned long)virt_to_phys(cpu_reset); - phys_reset(virt_to_phys(mcpm_entry_point)); - BUG(); - } - /* Some platforms might have to enable special resume modes, etc. */ if (platform_ops->cpu_suspend_prepare) { unsigned int mpidr = read_cpuid_mpidr(); @@ -256,12 +347,6 @@ int mcpm_cpu_powered_up(void) if (!platform_ops) return -EUNATCH; - /* backward compatibility callback */ - if (platform_ops->powered_up) { - platform_ops->powered_up(); - return 0; - } - mpidr = read_cpuid_mpidr(); cpu = MPIDR_AFFINITY_LEVEL(mpidr, 0); cluster = MPIDR_AFFINITY_LEVEL(mpidr, 1); @@ -334,120 +419,6 @@ int __init mcpm_loopback(void (*cache_disable)(void)) #endif -struct sync_struct mcpm_sync; - -/* - * __mcpm_cpu_going_down: Indicates that the cpu is being torn down. - * This must be called at the point of committing to teardown of a CPU. - * The CPU cache (SCTRL.C bit) is expected to still be active. - */ -void __mcpm_cpu_going_down(unsigned int cpu, unsigned int cluster) -{ - mcpm_sync.clusters[cluster].cpus[cpu].cpu = CPU_GOING_DOWN; - sync_cache_w(&mcpm_sync.clusters[cluster].cpus[cpu].cpu); -} - -/* - * __mcpm_cpu_down: Indicates that cpu teardown is complete and that the - * cluster can be torn down without disrupting this CPU. - * To avoid deadlocks, this must be called before a CPU is powered down. - * The CPU cache (SCTRL.C bit) is expected to be off. - * However L2 cache might or might not be active. - */ -void __mcpm_cpu_down(unsigned int cpu, unsigned int cluster) -{ - dmb(); - mcpm_sync.clusters[cluster].cpus[cpu].cpu = CPU_DOWN; - sync_cache_w(&mcpm_sync.clusters[cluster].cpus[cpu].cpu); - sev(); -} - -/* - * __mcpm_outbound_leave_critical: Leave the cluster teardown critical section. - * @state: the final state of the cluster: - * CLUSTER_UP: no destructive teardown was done and the cluster has been - * restored to the previous state (CPU cache still active); or - * CLUSTER_DOWN: the cluster has been torn-down, ready for power-off - * (CPU cache disabled, L2 cache either enabled or disabled). - */ -void __mcpm_outbound_leave_critical(unsigned int cluster, int state) -{ - dmb(); - mcpm_sync.clusters[cluster].cluster = state; - sync_cache_w(&mcpm_sync.clusters[cluster].cluster); - sev(); -} - -/* - * __mcpm_outbound_enter_critical: Enter the cluster teardown critical section. - * This function should be called by the last man, after local CPU teardown - * is complete. CPU cache expected to be active. - * - * Returns: - * false: the critical section was not entered because an inbound CPU was - * observed, or the cluster is already being set up; - * true: the critical section was entered: it is now safe to tear down the - * cluster. - */ -bool __mcpm_outbound_enter_critical(unsigned int cpu, unsigned int cluster) -{ - unsigned int i; - struct mcpm_sync_struct *c = &mcpm_sync.clusters[cluster]; - - /* Warn inbound CPUs that the cluster is being torn down: */ - c->cluster = CLUSTER_GOING_DOWN; - sync_cache_w(&c->cluster); - - /* Back out if the inbound cluster is already in the critical region: */ - sync_cache_r(&c->inbound); - if (c->inbound == INBOUND_COMING_UP) - goto abort; - - /* - * Wait for all CPUs to get out of the GOING_DOWN state, so that local - * teardown is complete on each CPU before tearing down the cluster. - * - * If any CPU has been woken up again from the DOWN state, then we - * shouldn't be taking the cluster down at all: abort in that case. - */ - sync_cache_r(&c->cpus); - for (i = 0; i < MAX_CPUS_PER_CLUSTER; i++) { - int cpustate; - - if (i == cpu) - continue; - - while (1) { - cpustate = c->cpus[i].cpu; - if (cpustate != CPU_GOING_DOWN) - break; - - wfe(); - sync_cache_r(&c->cpus[i].cpu); - } - - switch (cpustate) { - case CPU_DOWN: - continue; - - default: - goto abort; - } - } - - return true; - -abort: - __mcpm_outbound_leave_critical(cluster, CLUSTER_UP); - return false; -} - -int __mcpm_cluster_state(unsigned int cluster) -{ - sync_cache_r(&mcpm_sync.clusters[cluster].cluster); - return mcpm_sync.clusters[cluster].cluster; -} - extern unsigned long mcpm_power_up_setup_phys; int __init mcpm_sync_init( diff --git a/arch/arm/common/mcpm_head.S b/arch/arm/common/mcpm_head.S index e02db4b81..08b3bb9bc 100644 --- a/arch/arm/common/mcpm_head.S +++ b/arch/arm/common/mcpm_head.S @@ -49,7 +49,7 @@ ENTRY(mcpm_entry_point) ARM_BE8(setend be) - THUMB( adr r12, BSYM(1f) ) + THUMB( badr r12, 1f ) THUMB( bx r12 ) THUMB( .thumb ) 1: diff --git a/arch/arm/common/sa1111.c b/arch/arm/common/sa1111.c index 5cc779c8e..93ee70dbb 100644 --- a/arch/arm/common/sa1111.c +++ b/arch/arm/common/sa1111.c @@ -501,8 +501,8 @@ static int sa1111_setup_irq(struct sa1111 *sachip, unsigned irq_base) * Register SA1111 interrupt */ irq_set_irq_type(sachip->irq, IRQ_TYPE_EDGE_RISING); - irq_set_handler_data(sachip->irq, sachip); - irq_set_chained_handler(sachip->irq, sa1111_irq_handler); + irq_set_chained_handler_and_data(sachip->irq, sa1111_irq_handler, + sachip); dev_info(sachip->dev, "Providing IRQ%u-%u\n", sachip->irq_base, sachip->irq_base + SA1111_IRQ_NR - 1); @@ -836,8 +836,7 @@ static void __sa1111_remove(struct sa1111 *sachip) clk_unprepare(sachip->clk); if (sachip->irq != NO_IRQ) { - irq_set_chained_handler(sachip->irq, NULL); - irq_set_handler_data(sachip->irq, NULL); + irq_set_chained_handler_and_data(sachip->irq, NULL, NULL); irq_free_descs(sachip->irq_base, SA1111_IRQ_NR); release_mem_region(sachip->phys + SA1111_INTC, 512); diff --git a/arch/arm/common/timer-sp.c b/arch/arm/common/timer-sp.c deleted file mode 100644 index 192113247..000000000 --- a/arch/arm/common/timer-sp.c +++ /dev/null @@ -1,304 +0,0 @@ -/* - * linux/arch/arm/common/timer-sp.c - * - * Copyright (C) 1999 - 2003 ARM Limited - * Copyright (C) 2000 Deep Blue Solutions Ltd - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ -#include <linux/clk.h> -#include <linux/clocksource.h> -#include <linux/clockchips.h> -#include <linux/err.h> -#include <linux/interrupt.h> -#include <linux/irq.h> -#include <linux/io.h> -#include <linux/of.h> -#include <linux/of_address.h> -#include <linux/of_irq.h> -#include <linux/sched_clock.h> - -#include <asm/hardware/arm_timer.h> -#include <asm/hardware/timer-sp.h> - -static long __init sp804_get_clock_rate(struct clk *clk) -{ - long rate; - int err; - - err = clk_prepare(clk); - if (err) { - pr_err("sp804: clock failed to prepare: %d\n", err); - clk_put(clk); - return err; - } - - err = clk_enable(clk); - if (err) { - pr_err("sp804: clock failed to enable: %d\n", err); - clk_unprepare(clk); - clk_put(clk); - return err; - } - - rate = clk_get_rate(clk); - if (rate < 0) { - pr_err("sp804: clock failed to get rate: %ld\n", rate); - clk_disable(clk); - clk_unprepare(clk); - clk_put(clk); - } - - return rate; -} - -static void __iomem *sched_clock_base; - -static u64 notrace sp804_read(void) -{ - return ~readl_relaxed(sched_clock_base + TIMER_VALUE); -} - -void __init __sp804_clocksource_and_sched_clock_init(void __iomem *base, - const char *name, - struct clk *clk, - int use_sched_clock) -{ - long rate; - - if (!clk) { - clk = clk_get_sys("sp804", name); - if (IS_ERR(clk)) { - pr_err("sp804: clock not found: %d\n", - (int)PTR_ERR(clk)); - return; - } - } - - rate = sp804_get_clock_rate(clk); - - if (rate < 0) - return; - - /* setup timer 0 as free-running clocksource */ - writel(0, base + TIMER_CTRL); - writel(0xffffffff, base + TIMER_LOAD); - writel(0xffffffff, base + TIMER_VALUE); - writel(TIMER_CTRL_32BIT | TIMER_CTRL_ENABLE | TIMER_CTRL_PERIODIC, - base + TIMER_CTRL); - - clocksource_mmio_init(base + TIMER_VALUE, name, - rate, 200, 32, clocksource_mmio_readl_down); - - if (use_sched_clock) { - sched_clock_base = base; - sched_clock_register(sp804_read, 32, rate); - } -} - - -static void __iomem *clkevt_base; -static unsigned long clkevt_reload; - -/* - * IRQ handler for the timer - */ -static irqreturn_t sp804_timer_interrupt(int irq, void *dev_id) -{ - struct clock_event_device *evt = dev_id; - - /* clear the interrupt */ - writel(1, clkevt_base + TIMER_INTCLR); - - evt->event_handler(evt); - - return IRQ_HANDLED; -} - -static void sp804_set_mode(enum clock_event_mode mode, - struct clock_event_device *evt) -{ - unsigned long ctrl = TIMER_CTRL_32BIT | TIMER_CTRL_IE; - - writel(ctrl, clkevt_base + TIMER_CTRL); - - switch (mode) { - case CLOCK_EVT_MODE_PERIODIC: - writel(clkevt_reload, clkevt_base + TIMER_LOAD); - ctrl |= TIMER_CTRL_PERIODIC | TIMER_CTRL_ENABLE; - break; - - case CLOCK_EVT_MODE_ONESHOT: - /* period set, and timer enabled in 'next_event' hook */ - ctrl |= TIMER_CTRL_ONESHOT; - break; - - case CLOCK_EVT_MODE_UNUSED: - case CLOCK_EVT_MODE_SHUTDOWN: - default: - break; - } - - writel(ctrl, clkevt_base + TIMER_CTRL); -} - -static int sp804_set_next_event(unsigned long next, - struct clock_event_device *evt) -{ - unsigned long ctrl = readl(clkevt_base + TIMER_CTRL); - - writel(next, clkevt_base + TIMER_LOAD); - writel(ctrl | TIMER_CTRL_ENABLE, clkevt_base + TIMER_CTRL); - - return 0; -} - -static struct clock_event_device sp804_clockevent = { - .features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT | - CLOCK_EVT_FEAT_DYNIRQ, - .set_mode = sp804_set_mode, - .set_next_event = sp804_set_next_event, - .rating = 300, -}; - -static struct irqaction sp804_timer_irq = { - .name = "timer", - .flags = IRQF_TIMER | IRQF_IRQPOLL, - .handler = sp804_timer_interrupt, - .dev_id = &sp804_clockevent, -}; - -void __init __sp804_clockevents_init(void __iomem *base, unsigned int irq, struct clk *clk, const char *name) -{ - struct clock_event_device *evt = &sp804_clockevent; - long rate; - - if (!clk) - clk = clk_get_sys("sp804", name); - if (IS_ERR(clk)) { - pr_err("sp804: %s clock not found: %d\n", name, - (int)PTR_ERR(clk)); - return; - } - - rate = sp804_get_clock_rate(clk); - if (rate < 0) - return; - - clkevt_base = base; - clkevt_reload = DIV_ROUND_CLOSEST(rate, HZ); - evt->name = name; - evt->irq = irq; - evt->cpumask = cpu_possible_mask; - - writel(0, base + TIMER_CTRL); - - setup_irq(irq, &sp804_timer_irq); - clockevents_config_and_register(evt, rate, 0xf, 0xffffffff); -} - -static void __init sp804_of_init(struct device_node *np) -{ - static bool initialized = false; - void __iomem *base; - int irq; - u32 irq_num = 0; - struct clk *clk1, *clk2; - const char *name = of_get_property(np, "compatible", NULL); - - base = of_iomap(np, 0); - if (WARN_ON(!base)) - return; - - /* Ensure timers are disabled */ - writel(0, base + TIMER_CTRL); - writel(0, base + TIMER_2_BASE + TIMER_CTRL); - - if (initialized || !of_device_is_available(np)) - goto err; - - clk1 = of_clk_get(np, 0); - if (IS_ERR(clk1)) - clk1 = NULL; - - /* Get the 2nd clock if the timer has 3 timer clocks */ - if (of_count_phandle_with_args(np, "clocks", "#clock-cells") == 3) { - clk2 = of_clk_get(np, 1); - if (IS_ERR(clk2)) { - pr_err("sp804: %s clock not found: %d\n", np->name, - (int)PTR_ERR(clk2)); - clk2 = NULL; - } - } else - clk2 = clk1; - - irq = irq_of_parse_and_map(np, 0); - if (irq <= 0) - goto err; - - of_property_read_u32(np, "arm,sp804-has-irq", &irq_num); - if (irq_num == 2) { - __sp804_clockevents_init(base + TIMER_2_BASE, irq, clk2, name); - __sp804_clocksource_and_sched_clock_init(base, name, clk1, 1); - } else { - __sp804_clockevents_init(base, irq, clk1 , name); - __sp804_clocksource_and_sched_clock_init(base + TIMER_2_BASE, - name, clk2, 1); - } - initialized = true; - - return; -err: - iounmap(base); -} -CLOCKSOURCE_OF_DECLARE(sp804, "arm,sp804", sp804_of_init); - -static void __init integrator_cp_of_init(struct device_node *np) -{ - static int init_count = 0; - void __iomem *base; - int irq; - const char *name = of_get_property(np, "compatible", NULL); - struct clk *clk; - - base = of_iomap(np, 0); - if (WARN_ON(!base)) - return; - clk = of_clk_get(np, 0); - if (WARN_ON(IS_ERR(clk))) - return; - - /* Ensure timer is disabled */ - writel(0, base + TIMER_CTRL); - - if (init_count == 2 || !of_device_is_available(np)) - goto err; - - if (!init_count) - __sp804_clocksource_and_sched_clock_init(base, name, clk, 0); - else { - irq = irq_of_parse_and_map(np, 0); - if (irq <= 0) - goto err; - - __sp804_clockevents_init(base, irq, clk, name); - } - - init_count++; - return; -err: - iounmap(base); -} -CLOCKSOURCE_OF_DECLARE(intcp, "arm,integrator-cp-timer", integrator_cp_of_init); diff --git a/arch/arm/configs/at91_dt_defconfig b/arch/arm/configs/at91_dt_defconfig index bcef49a21..94b5dcabd 100644 --- a/arch/arm/configs/at91_dt_defconfig +++ b/arch/arm/configs/at91_dt_defconfig @@ -131,6 +131,8 @@ CONFIG_POWER_RESET=y CONFIG_WATCHDOG=y CONFIG_AT91SAM9X_WATCHDOG=y CONFIG_SSB=m +CONFIG_REGULATOR=y +CONFIG_REGULATOR_FIXED_VOLTAGE=y CONFIG_FB=y CONFIG_FB_ATMEL=y CONFIG_BACKLIGHT_LCD_SUPPORT=y diff --git a/arch/arm/configs/efm32_defconfig b/arch/arm/configs/efm32_defconfig index c4c17e3a8..c0dac0f0f 100644 --- a/arch/arm/configs/efm32_defconfig +++ b/arch/arm/configs/efm32_defconfig @@ -16,6 +16,7 @@ CONFIG_EMBEDDED=y # CONFIG_IOSCHED_DEADLINE is not set # CONFIG_IOSCHED_CFQ is not set # CONFIG_MMU is not set +CONFIG_ARM_SINGLE_ARMV7M=y CONFIG_ARCH_EFM32=y CONFIG_SET_MEM_PARAM=y CONFIG_DRAM_BASE=0x88000000 @@ -85,7 +86,6 @@ CONFIG_GPIO_SYSFS=y # CONFIG_USB_SUPPORT is not set CONFIG_MMC=y CONFIG_MMC_SPI=y -# CONFIG_IOMMU_SUPPORT is not set CONFIG_EXT2_FS=y # CONFIG_FILE_LOCKING is not set # CONFIG_DNOTIFY is not set diff --git a/arch/arm/configs/exynos_defconfig b/arch/arm/configs/exynos_defconfig index d034c96c0..9504e7790 100644 --- a/arch/arm/configs/exynos_defconfig +++ b/arch/arm/configs/exynos_defconfig @@ -26,11 +26,11 @@ CONFIG_ZBOOT_ROM_BSS=0x0 CONFIG_ARM_APPENDED_DTB=y CONFIG_ARM_ATAG_DTB_COMPAT=y CONFIG_CMDLINE="root=/dev/ram0 rw ramdisk=8192 initrd=0x41000000,8M console=ttySAC1,115200 init=/linuxrc mem=256M" +CONFIG_CPU_FREQ=y CONFIG_CPU_IDLE=y CONFIG_ARM_EXYNOS_CPUIDLE=y CONFIG_VFP=y CONFIG_NEON=y -CONFIG_PM=y CONFIG_NET=y CONFIG_PACKET=y CONFIG_UNIX=y @@ -40,15 +40,11 @@ CONFIG_IP_PNP=y CONFIG_IP_PNP_DHCP=y CONFIG_IP_PNP_BOOTP=y CONFIG_IP_PNP_RARP=y -CONFIG_WIRELESS=y CONFIG_CFG80211=y -CONFIG_MWIFIEX=y -CONFIG_MWIFIEX_SDIO=y CONFIG_RFKILL_REGULATOR=y CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_DEVTMPFS=y CONFIG_DEVTMPFS_MOUNT=y -CONFIG_PROC_DEVICETREE=y CONFIG_DMA_CMA=y CONFIG_CMA_SIZE_MBYTES=64 CONFIG_BLK_DEV_LOOP=y @@ -66,7 +62,8 @@ CONFIG_SMSC911X=y CONFIG_USB_USBNET=y CONFIG_USB_NET_SMSC75XX=y CONFIG_USB_NET_SMSC95XX=y -CONFIG_USB_GADGET=y +CONFIG_MWIFIEX=y +CONFIG_MWIFIEX_SDIO=y CONFIG_INPUT_EVDEV=y CONFIG_KEYBOARD_GPIO=y CONFIG_KEYBOARD_CROS_EC=y @@ -81,16 +78,13 @@ CONFIG_SERIAL_OF_PLATFORM=y CONFIG_HW_RANDOM=y CONFIG_TCG_TPM=y CONFIG_TCG_TIS_I2C_INFINEON=y -CONFIG_I2C=y CONFIG_I2C_CHARDEV=y CONFIG_I2C_MUX=y CONFIG_I2C_ARB_GPIO_CHALLENGE=y -CONFIG_I2C_EXYNOS5=y CONFIG_I2C_GPIO=y CONFIG_I2C_CROS_EC_TUNNEL=y CONFIG_SPI=y CONFIG_SPI_S3C64XX=y -CONFIG_I2C_S3C2410=y CONFIG_DEBUG_GPIO=y CONFIG_POWER_SUPPLY=y CONFIG_BATTERY_SBS=y @@ -99,13 +93,13 @@ CONFIG_BATTERY_MAX17042=y CONFIG_CHARGER_MAX14577=y CONFIG_CHARGER_MAX77693=y CONFIG_CHARGER_TPS65090=y -CONFIG_HWMON=y CONFIG_SENSORS_LM90=y -CONFIG_CPU_FREQ=y -CONFIG_CPU_THERMAL=y +CONFIG_SENSORS_PWM_FAN=y +CONFIG_SENSORS_INA2XX=y CONFIG_THERMAL=y -CONFIG_EXYNOS_THERMAL=y +CONFIG_CPU_THERMAL=y CONFIG_THERMAL_EMULATION=y +CONFIG_EXYNOS_THERMAL=y CONFIG_WATCHDOG=y CONFIG_S3C2410_WATCHDOG=y CONFIG_MFD_CROS_EC=y @@ -123,36 +117,27 @@ CONFIG_REGULATOR_GPIO=y CONFIG_REGULATOR_MAX14577=y CONFIG_REGULATOR_MAX8997=y CONFIG_REGULATOR_MAX77686=y -CONFIG_REGULATOR_MAX77802=y CONFIG_REGULATOR_MAX77693=y +CONFIG_REGULATOR_MAX77802=y CONFIG_REGULATOR_S2MPA01=y CONFIG_REGULATOR_S2MPS11=y CONFIG_REGULATOR_S5M8767=y CONFIG_REGULATOR_TPS65090=y CONFIG_DRM=y -CONFIG_DRM_EXYNOS_HDMI=y -CONFIG_DRM_BRIDGE=y CONFIG_DRM_PTN3460=y CONFIG_DRM_PS8622=y CONFIG_DRM_EXYNOS=y CONFIG_DRM_EXYNOS_FIMD=y -CONFIG_DRM_EXYNOS_DP=y -CONFIG_DRM_PANEL=y +CONFIG_DRM_EXYNOS_DSI=y +CONFIG_DRM_EXYNOS_HDMI=y CONFIG_DRM_PANEL_SIMPLE=y -CONFIG_FB=y -CONFIG_FB_MODE_HELPERS=y +CONFIG_DRM_PANEL_S6E8AA0=y CONFIG_FB_SIMPLE=y CONFIG_EXYNOS_VIDEO=y CONFIG_EXYNOS_MIPI_DSI=y -CONFIG_BACKLIGHT_LCD_SUPPORT=y CONFIG_LCD_CLASS_DEVICE=y CONFIG_LCD_PLATFORM=y -CONFIG_BACKLIGHT_CLASS_DEVICE=y -CONFIG_BACKLIGHT_GENERIC=y CONFIG_BACKLIGHT_PWM=y -CONFIG_FRAMEBUFFER_CONSOLE=y -CONFIG_FONTS=y -CONFIG_FONT_7x14=y CONFIG_LOGO=y CONFIG_SOUND=y CONFIG_SND=y @@ -169,6 +154,7 @@ CONFIG_USB_OHCI_EXYNOS=y CONFIG_USB_STORAGE=y CONFIG_USB_DWC3=y CONFIG_USB_HSIC_USB3503=y +CONFIG_USB_GADGET=y CONFIG_MMC=y CONFIG_MMC_BLOCK_MINORS=16 CONFIG_MMC_SDHCI=y @@ -197,11 +183,6 @@ CONFIG_EXYNOS_ADC=y CONFIG_PWM=y CONFIG_PWM_SAMSUNG=y CONFIG_PHY_EXYNOS5250_SATA=y -CONFIG_PHY_SAMSUNG_USB2=y -CONFIG_PHY_EXYNOS4210_USB2=y -CONFIG_PHY_EXYNOS4X12_USB2=y -CONFIG_PHY_EXYNOS5250_USB2=y -CONFIG_PHY_EXYNOS5_USBDRD=y CONFIG_EXT2_FS=y CONFIG_EXT3_FS=y CONFIG_EXT4_FS=y @@ -217,15 +198,16 @@ CONFIG_NLS_CODEPAGE_437=y CONFIG_NLS_ASCII=y CONFIG_NLS_ISO8859_1=y CONFIG_PRINTK_TIME=y +CONFIG_DEBUG_INFO=y CONFIG_DEBUG_FS=y CONFIG_MAGIC_SYSRQ=y CONFIG_DEBUG_KERNEL=y -CONFIG_DETECT_HUNG_TASK=y +CONFIG_LOCKUP_DETECTOR=y CONFIG_DEBUG_RT_MUTEXES=y CONFIG_DEBUG_SPINLOCK=y CONFIG_DEBUG_MUTEXES=y -CONFIG_LOCKUP_DETECTOR=y -CONFIG_DEBUG_INFO=y CONFIG_DEBUG_USER=y CONFIG_CRYPTO_SHA256=y CONFIG_CRC_CCITT=y +CONFIG_FONTS=y +CONFIG_FONT_7x14=y diff --git a/arch/arm/configs/hisi_defconfig b/arch/arm/configs/hisi_defconfig index c34da5878..5997dbc69 100644 --- a/arch/arm/configs/hisi_defconfig +++ b/arch/arm/configs/hisi_defconfig @@ -33,6 +33,7 @@ CONFIG_ATA=y CONFIG_SATA_AHCI_PLATFORM=y CONFIG_NETDEVICES=y CONFIG_HIX5HD2_GMAC=y +CONFIG_HIP04_ETH=y CONFIG_SERIAL_8250=y CONFIG_SERIAL_8250_DEPRECATED_OPTIONS=y CONFIG_SERIAL_8250_CONSOLE=y @@ -51,6 +52,7 @@ CONFIG_GPIO_SYSFS=y CONFIG_GPIOLIB=y CONFIG_GPIO_GENERIC_PLATFORM=y CONFIG_REGULATOR_GPIO=y +CONFIG_GPIO_DWAPB=y CONFIG_MFD_SYSCON=y CONFIG_POWER_RESET_SYSCON=y CONFIG_DRM=y diff --git a/arch/arm/configs/imx_v6_v7_defconfig b/arch/arm/configs/imx_v6_v7_defconfig index fdeb1c83d..b47863d49 100644 --- a/arch/arm/configs/imx_v6_v7_defconfig +++ b/arch/arm/configs/imx_v6_v7_defconfig @@ -38,7 +38,9 @@ CONFIG_SOC_IMX53=y CONFIG_SOC_IMX6Q=y CONFIG_SOC_IMX6SL=y CONFIG_SOC_IMX6SX=y +CONFIG_SOC_IMX7D=y CONFIG_SOC_VF610=y +CONFIG_SOC_LS1021A=y CONFIG_PCI=y CONFIG_PCI_IMX6=y CONFIG_SMP=y @@ -73,6 +75,7 @@ CONFIG_CAN=y CONFIG_CAN_FLEXCAN=y CONFIG_BT=y CONFIG_BT_HCIUART=y +CONFIG_BT_HCIUART_LL=y CONFIG_BT_HCIUART_3WIRE=y CONFIG_CFG80211=y CONFIG_MAC80211=y @@ -139,6 +142,10 @@ CONFIG_USB_RTL8152=m CONFIG_USB_USBNET=m CONFIG_USB_NET_CDC_EEM=m CONFIG_BRCMFMAC=m +CONFIG_WL_TI=y +CONFIG_WL12XX=m +CONFIG_WLCORE_SDIO=m +# CONFIG_WILINK_PLATFORM_DATA is not set # CONFIG_INPUT_MOUSEDEV_PSAUX is not set CONFIG_INPUT_EVDEV=y CONFIG_INPUT_EVBUG=m @@ -151,6 +158,7 @@ CONFIG_TOUCHSCREEN_EGALAX=y CONFIG_TOUCHSCREEN_MC13783=y CONFIG_TOUCHSCREEN_TSC2007=y CONFIG_TOUCHSCREEN_STMPE=y +CONFIG_TOUCHSCREEN_SX8654=y CONFIG_INPUT_MISC=y CONFIG_INPUT_MMA8450=y CONFIG_SERIO_SERPORT=m @@ -283,6 +291,7 @@ CONFIG_RTC_CLASS=y CONFIG_RTC_INTF_DEV_UIE_EMUL=y CONFIG_RTC_DRV_DS1307=y CONFIG_RTC_DRV_ISL1208=y +CONFIG_RTC_DRV_PCF8523=y CONFIG_RTC_DRV_PCF8563=y CONFIG_RTC_DRV_MC13XXX=y CONFIG_RTC_DRV_MXC=y diff --git a/arch/arm/configs/keystone_defconfig b/arch/arm/configs/keystone_defconfig index f8a1c8f2c..95ce1284b 100644 --- a/arch/arm/configs/keystone_defconfig +++ b/arch/arm/configs/keystone_defconfig @@ -123,6 +123,9 @@ CONFIG_EEPROM_AT24=y CONFIG_SCSI=y CONFIG_BLK_DEV_SD=y CONFIG_NETDEVICES=y +CONFIG_TI_KEYSTONE_NETCP=y +CONFIG_TI_KEYSTONE_NETCP_ETHSS=y +CONFIG_PHYLIB=y CONFIG_SERIAL_8250=y CONFIG_SERIAL_8250_CONSOLE=y CONFIG_SERIAL_OF_PLATFORM=y @@ -152,6 +155,9 @@ CONFIG_USB_DWC3_VERBOSE=y CONFIG_KEYSTONE_USB_PHY=y CONFIG_DMADEVICES=y CONFIG_TI_EDMA=y +CONFIG_SOC_TI=y +CONFIG_KEYSTONE_NAVIGATOR_QMSS=y +CONFIG_KEYSTONE_NAVIGATOR_DMA=y CONFIG_MEMORY=y CONFIG_TI_AEMIF=y CONFIG_EXT4_FS=y diff --git a/arch/arm/configs/lpc18xx_defconfig b/arch/arm/configs/lpc18xx_defconfig new file mode 100644 index 000000000..1c47f86c3 --- /dev/null +++ b/arch/arm/configs/lpc18xx_defconfig @@ -0,0 +1,151 @@ +CONFIG_CROSS_COMPILE="arm-linux-gnueabihf-" +CONFIG_HIGH_RES_TIMERS=y +CONFIG_BLK_DEV_INITRD=y +# CONFIG_RD_BZIP2 is not set +# CONFIG_RD_LZMA is not set +# CONFIG_RD_XZ is not set +# CONFIG_RD_LZO is not set +# CONFIG_RD_LZ4 is not set +CONFIG_CC_OPTIMIZE_FOR_SIZE=y +# CONFIG_UID16 is not set +# CONFIG_BASE_FULL is not set +# CONFIG_FUTEX is not set +# CONFIG_EPOLL is not set +# CONFIG_SIGNALFD is not set +# CONFIG_EVENTFD is not set +# CONFIG_AIO is not set +CONFIG_EMBEDDED=y +# CONFIG_VM_EVENT_COUNTERS is not set +# CONFIG_SLUB_DEBUG is not set +# CONFIG_LBDAF is not set +# CONFIG_BLK_DEV_BSG is not set +# CONFIG_IOSCHED_DEADLINE is not set +# CONFIG_IOSCHED_CFQ is not set +# CONFIG_MMU is not set +CONFIG_ARM_SINGLE_ARMV7M=y +CONFIG_ARCH_LPC18XX=y +CONFIG_SET_MEM_PARAM=y +CONFIG_DRAM_BASE=0x28000000 +CONFIG_DRAM_SIZE=0x02000000 +CONFIG_FLASH_MEM_BASE=0x1b000000 +CONFIG_FLASH_SIZE=0x00080000 +CONFIG_PREEMPT=y +CONFIG_ZBOOT_ROM_TEXT=0x0 +CONFIG_ZBOOT_ROM_BSS=0x0 +CONFIG_ARM_APPENDED_DTB=y +CONFIG_BINFMT_FLAT=y +CONFIG_BINFMT_ZFLAT=y +CONFIG_BINFMT_SHARED_FLAT=y +# CONFIG_COREDUMP is not set +CONFIG_NET=y +CONFIG_PACKET=y +CONFIG_UNIX=y +CONFIG_INET=y +# CONFIG_INET_XFRM_MODE_TRANSPORT is not set +# CONFIG_INET_XFRM_MODE_TUNNEL is not set +# CONFIG_INET_XFRM_MODE_BEET is not set +# CONFIG_INET_LRO is not set +# CONFIG_INET_DIAG is not set +# CONFIG_IPV6 is not set +# CONFIG_WIRELESS is not set +CONFIG_DEVTMPFS=y +CONFIG_DEVTMPFS_MOUNT=y +# CONFIG_FW_LOADER is not set +CONFIG_MTD=y +CONFIG_MTD_CFI=y +CONFIG_MTD_CFI_INTELEXT=y +CONFIG_MTD_CFI_AMDSTD=y +CONFIG_MTD_CFI_STAA=y +CONFIG_MTD_PHYSMAP=y +CONFIG_MTD_PHYSMAP_OF=y +CONFIG_BLK_DEV_RAM=y +CONFIG_SRAM=y +CONFIG_EEPROM_AT24=y +CONFIG_NETDEVICES=y +# CONFIG_NET_VENDOR_ARC is not set +# CONFIG_NET_CADENCE is not set +# CONFIG_NET_VENDOR_BROADCOM is not set +# CONFIG_NET_VENDOR_CIRRUS is not set +# CONFIG_NET_VENDOR_FARADAY is not set +# CONFIG_NET_VENDOR_HISILICON is not set +# CONFIG_NET_VENDOR_INTEL is not set +# CONFIG_NET_VENDOR_MARVELL is not set +# CONFIG_NET_VENDOR_MICREL is not set +# CONFIG_NET_VENDOR_MICROCHIP is not set +# CONFIG_NET_VENDOR_NATSEMI is not set +# CONFIG_NET_VENDOR_QUALCOMM is not set +# CONFIG_NET_VENDOR_ROCKER is not set +# CONFIG_NET_VENDOR_SAMSUNG is not set +# CONFIG_NET_VENDOR_SEEQ is not set +# CONFIG_NET_VENDOR_SMSC is not set +CONFIG_STMMAC_ETH=y +# CONFIG_NET_VENDOR_VIA is not set +# CONFIG_NET_VENDOR_WIZNET is not set +CONFIG_SMSC_PHY=y +# CONFIG_USB_NET_DRIVERS is not set +# CONFIG_WLAN is not set +# CONFIG_INPUT_MOUSEDEV is not set +CONFIG_INPUT_EVDEV=y +# CONFIG_KEYBOARD_ATKBD is not set +CONFIG_KEYBOARD_GPIO=y +CONFIG_KEYBOARD_GPIO_POLLED=y +# CONFIG_INPUT_MOUSE is not set +# CONFIG_SERIO is not set +# CONFIG_VT is not set +# CONFIG_UNIX98_PTYS is not set +# CONFIG_LEGACY_PTYS is not set +CONFIG_SERIAL_NONSTANDARD=y +# CONFIG_DEVKMEM is not set +CONFIG_SERIAL_8250=y +# CONFIG_SERIAL_8250_DEPRECATED_OPTIONS is not set +CONFIG_SERIAL_8250_CONSOLE=y +CONFIG_SERIAL_OF_PLATFORM=y +# CONFIG_HW_RANDOM is not set +CONFIG_I2C=y +CONFIG_SPI=y +CONFIG_SPI_PL022=y +CONFIG_GPIO_SYSFS=y +CONFIG_GPIO_74XX_MMIO=y +CONFIG_SENSORS_LM75=y +CONFIG_WATCHDOG=y +CONFIG_WATCHDOG_CORE=y +CONFIG_MFD_SYSCON=y +CONFIG_REGULATOR=y +CONFIG_REGULATOR_FIXED_VOLTAGE=y +CONFIG_FB=y +CONFIG_FB_ARMCLCD=y +CONFIG_USB=y +CONFIG_USB_EHCI_HCD=y +CONFIG_USB_EHCI_ROOT_HUB_TT=y +CONFIG_MMC=y +CONFIG_MMC_DW=y +CONFIG_MMC_DW_IDMAC=y +CONFIG_NEW_LEDS=y +CONFIG_LEDS_CLASS=y +CONFIG_LEDS_PCA9532=y +CONFIG_LEDS_PCA9532_GPIO=y +CONFIG_LEDS_GPIO=y +CONFIG_LEDS_TRIGGERS=y +CONFIG_LEDS_TRIGGER_HEARTBEAT=y +CONFIG_RTC_CLASS=y +CONFIG_DMADEVICES=y +CONFIG_AMBA_PL08X=y +CONFIG_EXT2_FS=y +# CONFIG_FILE_LOCKING is not set +# CONFIG_DNOTIFY is not set +# CONFIG_INOTIFY_USER is not set +# CONFIG_NETWORK_FILESYSTEMS is not set +CONFIG_PRINTK_TIME=y +CONFIG_DEBUG_INFO=y +# CONFIG_ENABLE_WARN_DEPRECATED is not set +# CONFIG_ENABLE_MUST_CHECK is not set +CONFIG_DEBUG_FS=y +CONFIG_MAGIC_SYSRQ=y +# CONFIG_SCHED_DEBUG is not set +# CONFIG_DEBUG_BUGVERBOSE is not set +# CONFIG_RCU_CPU_STALL_INFO is not set +# CONFIG_FTRACE is not set +CONFIG_DEBUG_LL=y +CONFIG_EARLY_PRINTK=y +CONFIG_CRC_ITU_T=y +CONFIG_CRC7=y diff --git a/arch/arm/configs/multi_v7_defconfig b/arch/arm/configs/multi_v7_defconfig index fbbb1915c..5fd8df6f5 100644 --- a/arch/arm/configs/multi_v7_defconfig +++ b/arch/arm/configs/multi_v7_defconfig @@ -20,6 +20,9 @@ CONFIG_MACH_ARMADA_38X=y CONFIG_MACH_ARMADA_39X=y CONFIG_MACH_ARMADA_XP=y CONFIG_MACH_DOVE=y +CONFIG_ARCH_AT91=y +CONFIG_SOC_SAMA5D3=y +CONFIG_SOC_SAMA5D4=y CONFIG_ARCH_BCM=y CONFIG_ARCH_BCM_CYGNUS=y CONFIG_ARCH_BCM_21664=y @@ -30,6 +33,7 @@ CONFIG_ARCH_BERLIN=y CONFIG_MACH_BERLIN_BG2=y CONFIG_MACH_BERLIN_BG2CD=y CONFIG_MACH_BERLIN_BG2Q=y +CONFIG_ARCH_DIGICOLOR=y CONFIG_ARCH_HIGHBANK=y CONFIG_ARCH_HISI=y CONFIG_ARCH_HI3xxx=y @@ -72,6 +76,7 @@ CONFIG_ARCH_EMEV2=y CONFIG_ARCH_R7S72100=y CONFIG_ARCH_R8A73A4=y CONFIG_ARCH_R8A7740=y +CONFIG_ARCH_R8A7778=y CONFIG_ARCH_R8A7779=y CONFIG_ARCH_R8A7790=y CONFIG_ARCH_R8A7791=y @@ -86,6 +91,7 @@ CONFIG_ARCH_TEGRA_3x_SOC=y CONFIG_ARCH_TEGRA_114_SOC=y CONFIG_ARCH_TEGRA_124_SOC=y CONFIG_TEGRA_EMC_SCALING_ENABLE=y +CONFIG_ARCH_UNIPHIER=y CONFIG_ARCH_U8500=y CONFIG_MACH_HREFV60=y CONFIG_MACH_SNOWBALL=y @@ -115,8 +121,11 @@ CONFIG_CPU_FREQ=y CONFIG_CPU_FREQ_STAT_DETAILS=y CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y CONFIG_CPU_IDLE=y +CONFIG_ARM_CPUIDLE=y CONFIG_NEON=y +CONFIG_KERNEL_MODE_NEON=y CONFIG_ARM_ZYNQ_CPUIDLE=y +CONFIG_ARM_EXYNOS_CPUIDLE=y CONFIG_NET=y CONFIG_PACKET=y CONFIG_UNIX=y @@ -137,6 +146,7 @@ CONFIG_CAN=y CONFIG_CAN_RAW=y CONFIG_CAN_BCM=y CONFIG_CAN_DEV=y +CONFIG_CAN_AT91=m CONFIG_CAN_XILINXCAN=y CONFIG_CAN_MCP251X=y CONFIG_BT=m @@ -158,13 +168,17 @@ CONFIG_MTD_CMDLINE_PARTS=y CONFIG_MTD_BLOCK=y CONFIG_MTD_M25P80=y CONFIG_MTD_NAND=y +CONFIG_MTD_NAND_ATMEL=y +CONFIG_MTD_NAND_BRCMNAND=y CONFIG_MTD_NAND_DAVINCI=y CONFIG_MTD_SPI_NOR=y CONFIG_MTD_UBI=y CONFIG_BLK_DEV_LOOP=y CONFIG_AD525X_DPOT=y CONFIG_AD525X_DPOT_I2C=y +CONFIG_ATMEL_TCLIB=y CONFIG_ICS932S401=y +CONFIG_ATMEL_SSC=m CONFIG_APDS9802ALS=y CONFIG_ISL29003=y CONFIG_EEPROM_AT24=y @@ -213,12 +227,14 @@ CONFIG_MWIFIEX=m CONFIG_MWIFIEX_SDIO=m CONFIG_INPUT_JOYDEV=y CONFIG_INPUT_EVDEV=y +CONFIG_KEYBOARD_QT1070=m CONFIG_KEYBOARD_GPIO=y CONFIG_KEYBOARD_TEGRA=y CONFIG_KEYBOARD_SPEAR=y CONFIG_KEYBOARD_ST_KEYSCAN=y CONFIG_KEYBOARD_CROS_EC=y CONFIG_MOUSE_PS2_ELANTECH=y +CONFIG_MOUSE_CYAPA=m CONFIG_MOUSE_ELAN_I2C=y CONFIG_INPUT_TOUCHSCREEN=y CONFIG_TOUCHSCREEN_ATMEL_MXT=y @@ -237,6 +253,9 @@ CONFIG_SERIAL_8250_EM=y CONFIG_SERIAL_8250_MT6577=y CONFIG_SERIAL_AMBA_PL011=y CONFIG_SERIAL_AMBA_PL011_CONSOLE=y +CONFIG_SERIAL_ATMEL=y +CONFIG_SERIAL_ATMEL_CONSOLE=y +CONFIG_SERIAL_ATMEL_TTYAT=y CONFIG_SERIAL_MESON=y CONFIG_SERIAL_MESON_CONSOLE=y CONFIG_SERIAL_SAMSUNG=y @@ -260,15 +279,20 @@ CONFIG_SERIAL_XILINX_PS_UART=y CONFIG_SERIAL_XILINX_PS_UART_CONSOLE=y CONFIG_SERIAL_FSL_LPUART=y CONFIG_SERIAL_FSL_LPUART_CONSOLE=y +CONFIG_SERIAL_CONEXANT_DIGICOLOR=y +CONFIG_SERIAL_CONEXANT_DIGICOLOR_CONSOLE=y CONFIG_SERIAL_ST_ASC=y CONFIG_SERIAL_ST_ASC_CONSOLE=y CONFIG_I2C_CHARDEV=y CONFIG_I2C_DAVINCI=y CONFIG_I2C_MUX=y +CONFIG_I2C_ARB_GPIO_CHALLENGE=m CONFIG_I2C_MUX_PCA954x=y CONFIG_I2C_MUX_PINCTRL=y +CONFIG_I2C_AT91=m CONFIG_I2C_CADENCE=y CONFIG_I2C_DESIGNWARE_PLATFORM=y +CONFIG_I2C_DIGICOLOR=m CONFIG_I2C_GPIO=m CONFIG_I2C_EXYNOS5=y CONFIG_I2C_MV64XXX=y @@ -280,13 +304,16 @@ CONFIG_I2C_ST=y CONFIG_I2C_TEGRA=y CONFIG_I2C_XILINX=y CONFIG_I2C_RCAR=y +CONFIG_I2C_CROS_EC_TUNNEL=m CONFIG_SPI=y +CONFIG_SPI_ATMEL=m CONFIG_SPI_CADENCE=y CONFIG_SPI_DAVINCI=y CONFIG_SPI_OMAP24XX=y CONFIG_SPI_ORION=y CONFIG_SPI_PL022=y CONFIG_SPI_RSPI=y +CONFIG_SPI_S3C64XX=m CONFIG_SPI_SH_MSIOF=m CONFIG_SPI_SH_HSPI=y CONFIG_SPI_SIRF=y @@ -317,12 +344,15 @@ CONFIG_GPIO_SYSCON=y CONFIG_GPIO_TPS6586X=y CONFIG_GPIO_TPS65910=y CONFIG_BATTERY_SBS=y +CONFIG_BATTERY_MAX17040=m +CONFIG_BATTERY_MAX17042=m +CONFIG_CHARGER_MAX14577=m +CONFIG_CHARGER_MAX77693=m CONFIG_CHARGER_TPS65090=y CONFIG_POWER_RESET_AS3722=y CONFIG_POWER_RESET_GPIO=y CONFIG_POWER_RESET_GPIO_RESTART=y CONFIG_POWER_RESET_KEYSTONE=y -CONFIG_POWER_RESET_SUN6I=y CONFIG_POWER_RESET_RMOBILE=y CONFIG_SENSORS_LM90=y CONFIG_SENSORS_LM95245=y @@ -330,13 +360,15 @@ CONFIG_THERMAL=y CONFIG_CPU_THERMAL=y CONFIG_RCAR_THERMAL=y CONFIG_ARMADA_THERMAL=y -CONFIG_DAVINCI_WATCHDOG +CONFIG_DAVINCI_WATCHDOG=m +CONFIG_EXYNOS_THERMAL=m CONFIG_ST_THERMAL_SYSCFG=y CONFIG_ST_THERMAL_MEMMAP=y CONFIG_WATCHDOG=y CONFIG_XILINX_WATCHDOG=y CONFIG_ARM_SP805_WATCHDOG=y CONFIG_ORION_WATCHDOG=y +CONFIG_ST_LPC_WATCHDOG=y CONFIG_SUNXI_WATCHDOG=y CONFIG_MESON_WATCHDOG=y CONFIG_MFD_AS3711=y @@ -344,8 +376,11 @@ CONFIG_MFD_AS3722=y CONFIG_MFD_BCM590XX=y CONFIG_MFD_AXP20X=y CONFIG_MFD_CROS_EC=y +CONFIG_MFD_CROS_EC_I2C=m CONFIG_MFD_CROS_EC_SPI=y +CONFIG_MFD_MAX14577=y CONFIG_MFD_MAX77686=y +CONFIG_MFD_MAX77693=y CONFIG_MFD_MAX8907=y CONFIG_MFD_SEC_CORE=y CONFIG_MFD_STMPE=y @@ -362,9 +397,11 @@ CONFIG_REGULATOR_DA9210=y CONFIG_REGULATOR_GPIO=y CONFIG_MFD_SYSCON=y CONFIG_POWER_RESET_SYSCON=y +CONFIG_REGULATOR_MAX14577=m CONFIG_REGULATOR_MAX8907=y CONFIG_REGULATOR_MAX8973=y CONFIG_REGULATOR_MAX77686=y +CONFIG_REGULATOR_MAX77693=m CONFIG_REGULATOR_PALMAS=y CONFIG_REGULATOR_S2MPS11=y CONFIG_REGULATOR_S5M8767=y @@ -375,7 +412,7 @@ CONFIG_REGULATOR_TPS6586X=y CONFIG_REGULATOR_TPS65910=y CONFIG_REGULATOR_TWL4030=y CONFIG_REGULATOR_VEXPRESS=y -CONFIG_MEDIA_SUPPORT=y +CONFIG_MEDIA_SUPPORT=m CONFIG_MEDIA_CAMERA_SUPPORT=y CONFIG_MEDIA_CONTROLLER=y CONFIG_VIDEO_V4L2_SUBDEV_API=y @@ -390,9 +427,17 @@ CONFIG_V4L_MEM2MEM_DRIVERS=y CONFIG_VIDEO_RENESAS_VSP1=m # CONFIG_MEDIA_SUBDRV_AUTOSELECT is not set CONFIG_VIDEO_ADV7180=m +CONFIG_VIDEO_ML86V7667=m CONFIG_DRM=y +CONFIG_DRM_PTN3460=m +CONFIG_DRM_PS8622=m +CONFIG_DRM_EXYNOS=m +CONFIG_DRM_EXYNOS_DSI=y +CONFIG_DRM_EXYNOS_FIMD=y +CONFIG_DRM_EXYNOS_HDMI=y CONFIG_DRM_RCAR_DU=m CONFIG_DRM_TEGRA=y +CONFIG_DRM_PANEL_S6E8AA0=m CONFIG_DRM_PANEL_SIMPLE=y CONFIG_FB_ARMCLCD=y CONFIG_FB_WM8505=y @@ -401,24 +446,27 @@ CONFIG_FB_SIMPLE=y CONFIG_FB_SH_MOBILE_MERAM=y CONFIG_BACKLIGHT_LCD_SUPPORT=y CONFIG_BACKLIGHT_CLASS_DEVICE=y +CONFIG_LCD_PLATFORM=m CONFIG_BACKLIGHT_PWM=y CONFIG_BACKLIGHT_AS3711=y CONFIG_FRAMEBUFFER_CONSOLE=y CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y -CONFIG_SOUND=y -CONFIG_SND=y +CONFIG_SOUND=m +CONFIG_SND=m CONFIG_SND_DYNAMIC_MINORS=y CONFIG_SND_USB_AUDIO=y -CONFIG_SND_SOC=y +CONFIG_SND_SOC=m +CONFIG_SND_ATMEL_SOC=m +CONFIG_SND_ATMEL_SOC_WM8904=m CONFIG_SND_SOC_SH4_FSI=m CONFIG_SND_SOC_RCAR=m -CONFIG_SND_SOC_TEGRA=y -CONFIG_SND_SOC_TEGRA_RT5640=y -CONFIG_SND_SOC_TEGRA_WM8753=y -CONFIG_SND_SOC_TEGRA_WM8903=y -CONFIG_SND_SOC_TEGRA_TRIMSLICE=y -CONFIG_SND_SOC_TEGRA_ALC5632=y -CONFIG_SND_SOC_TEGRA_MAX98090=y +CONFIG_SND_SOC_TEGRA=m +CONFIG_SND_SOC_TEGRA_RT5640=m +CONFIG_SND_SOC_TEGRA_WM8753=m +CONFIG_SND_SOC_TEGRA_WM8903=m +CONFIG_SND_SOC_TEGRA_TRIMSLICE=m +CONFIG_SND_SOC_TEGRA_ALC5632=m +CONFIG_SND_SOC_TEGRA_MAX98090=m CONFIG_SND_SOC_AK4642=m CONFIG_SND_SOC_WM8978=m CONFIG_USB=y @@ -433,6 +481,7 @@ CONFIG_USB_ISP1760=y CONFIG_USB_OHCI_HCD=y CONFIG_USB_OHCI_HCD_STI=y CONFIG_USB_OHCI_HCD_PLATFORM=y +CONFIG_USB_OHCI_EXYNOS=m CONFIG_USB_R8A66597_HCD=m CONFIG_USB_RENESAS_USBHS=m CONFIG_USB_STORAGE=y @@ -448,7 +497,6 @@ CONFIG_USB_GPIO_VBUS=y CONFIG_USB_ISP1301=y CONFIG_USB_MXS_PHY=y CONFIG_USB_RCAR_PHY=m -CONFIG_USB_RCAR_GEN2_PHY=m CONFIG_USB_GADGET=y CONFIG_USB_RENESAS_USBHS_UDC=m CONFIG_MMC=y @@ -468,6 +516,7 @@ CONFIG_MMC_SDHCI_BCM_KONA=y CONFIG_MMC_SDHCI_ST=y CONFIG_MMC_OMAP=y CONFIG_MMC_OMAP_HS=y +CONFIG_MMC_ATMELMCI=y CONFIG_MMC_MVSDIO=y CONFIG_MMC_SDHI=y CONFIG_MMC_DW=y @@ -500,14 +549,22 @@ CONFIG_RTC_DRV_AS3722=y CONFIG_RTC_DRV_DS1307=y CONFIG_RTC_DRV_MAX8907=y CONFIG_RTC_DRV_MAX77686=y +CONFIG_RTC_DRV_MAX77802=m CONFIG_RTC_DRV_RS5C372=m CONFIG_RTC_DRV_PALMAS=y +CONFIG_RTC_DRV_ST_LPC=y CONFIG_RTC_DRV_TWL4030=y CONFIG_RTC_DRV_TPS6586X=y CONFIG_RTC_DRV_TPS65910=y CONFIG_RTC_DRV_S35390A=m +CONFIG_RTC_DRV_RX8581=m CONFIG_RTC_DRV_EM3027=y +CONFIG_RTC_DRV_DIGICOLOR=m +CONFIG_RTC_DRV_S5M=m +CONFIG_RTC_DRV_S3C=m CONFIG_RTC_DRV_PL031=y +CONFIG_RTC_DRV_AT91RM9200=m +CONFIG_RTC_DRV_AT91SAM9=m CONFIG_RTC_DRV_VT8500=y CONFIG_RTC_DRV_SUN6I=y CONFIG_RTC_DRV_SUNXI=y @@ -515,6 +572,8 @@ CONFIG_RTC_DRV_MV=y CONFIG_RTC_DRV_TEGRA=y CONFIG_DMADEVICES=y CONFIG_DW_DMAC=y +CONFIG_AT_HDMAC=y +CONFIG_AT_XDMAC=y CONFIG_MV_XOR=y CONFIG_TEGRA20_APB_DMA=y CONFIG_SH_DMAE=y @@ -537,8 +596,13 @@ CONFIG_SERIO_NVEC_PS2=y CONFIG_NVEC_POWER=y CONFIG_NVEC_PAZ00=y CONFIG_QCOM_GSBI=y +CONFIG_QCOM_PM=y CONFIG_COMMON_CLK_QCOM=y +CONFIG_CHROME_PLATFORMS=y +CONFIG_CROS_EC_CHARDEV=m CONFIG_COMMON_CLK_MAX77686=y +CONFIG_COMMON_CLK_MAX77802=m +CONFIG_COMMON_CLK_S2MPS11=m CONFIG_APQ_MMCC_8084=y CONFIG_MSM_GCC_8660=y CONFIG_MSM_MMCC_8960=y @@ -550,10 +614,14 @@ CONFIG_ARM_TEGRA_DEVFREQ=m CONFIG_MEMORY=y CONFIG_TI_AEMIF=y CONFIG_IIO=y +CONFIG_AT91_ADC=m CONFIG_XILINX_XADC=y CONFIG_AK8975=y CONFIG_PWM=y +CONFIG_PWM_ATMEL=m +CONFIG_PWM_ATMEL_TCB=m CONFIG_PWM_RENESAS_TPU=y +CONFIG_PWM_SAMSUNG=m CONFIG_PWM_TEGRA=y CONFIG_PWM_VT8500=y CONFIG_PHY_HIX5HD2_SATA=y @@ -561,10 +629,12 @@ CONFIG_OMAP_USB2=y CONFIG_TI_PIPE3=y CONFIG_PHY_MIPHY28LP=y CONFIG_PHY_MIPHY365X=y +CONFIG_PHY_RCAR_GEN2=m CONFIG_PHY_STIH41X_USB=y CONFIG_PHY_STIH407_USB=y CONFIG_PHY_SUN4I_USB=y CONFIG_PHY_SUN9I_USB=y +CONFIG_PHY_SAMSUNG_USB2=m CONFIG_EXT4_FS=y CONFIG_AUTOFS4_FS=y CONFIG_MSDOS_FS=y @@ -590,3 +660,17 @@ CONFIG_LOCKUP_DETECTOR=y CONFIG_CRYPTO_DEV_TEGRA_AES=y CONFIG_CPUFREQ_DT=y CONFIG_KEYSTONE_IRQ=y +CONFIG_ARM_CRYPTO=y +CONFIG_CRYPTO_SHA1_ARM=m +CONFIG_CRYPTO_SHA1_ARM_NEON=m +CONFIG_CRYPTO_SHA1_ARM_CE=m +CONFIG_CRYPTO_SHA2_ARM_CE=m +CONFIG_CRYPTO_SHA256_ARM=m +CONFIG_CRYPTO_SHA512_ARM=m +CONFIG_CRYPTO_AES_ARM=m +CONFIG_CRYPTO_AES_ARM_BS=m +CONFIG_CRYPTO_AES_ARM_CE=m +CONFIG_CRYPTO_GHASH_ARM_CE=m +CONFIG_CRYPTO_DEV_ATMEL_AES=m +CONFIG_CRYPTO_DEV_ATMEL_TDES=m +CONFIG_CRYPTO_DEV_ATMEL_SHA=m diff --git a/arch/arm/configs/omap2plus_defconfig b/arch/arm/configs/omap2plus_defconfig index 3743ca221..ac521e764 100644 --- a/arch/arm/configs/omap2plus_defconfig +++ b/arch/arm/configs/omap2plus_defconfig @@ -152,6 +152,7 @@ CONFIG_NETDEVICES=y # CONFIG_NET_CADENCE is not set # CONFIG_NET_VENDOR_BROADCOM is not set # CONFIG_NET_VENDOR_CIRRUS is not set +CONFIG_DM9000=y # CONFIG_NET_VENDOR_FARADAY is not set # CONFIG_NET_VENDOR_HISILICON is not set # CONFIG_NET_VENDOR_INTEL is not set @@ -204,6 +205,7 @@ CONFIG_KEYBOARD_TWL4030=m CONFIG_INPUT_TOUCHSCREEN=y CONFIG_TOUCHSCREEN_ADS7846=m CONFIG_TOUCHSCREEN_EDT_FT5X06=m +CONFIG_TOUCHSCREEN_PIXCIR=m CONFIG_TOUCHSCREEN_TSC2005=m CONFIG_TOUCHSCREEN_TSC2007=m CONFIG_INPUT_MISC=y @@ -401,6 +403,7 @@ CONFIG_PWM_TIECAP=m CONFIG_PWM_TIEHRPWM=m CONFIG_PWM_TWL=m CONFIG_PWM_TWL_LED=m +CONFIG_PHY_DM816X_USB=m CONFIG_OMAP_USB2=m CONFIG_TI_PIPE3=y CONFIG_TWL4030_USB=m diff --git a/arch/arm/configs/qcom_defconfig b/arch/arm/configs/qcom_defconfig index d2f2babfd..e6a6f282e 100644 --- a/arch/arm/configs/qcom_defconfig +++ b/arch/arm/configs/qcom_defconfig @@ -30,6 +30,7 @@ CONFIG_CLEANCACHE=y CONFIG_ARM_APPENDED_DTB=y CONFIG_ARM_ATAG_DTB_COMPAT=y CONFIG_CPU_IDLE=y +CONFIG_ARM_CPUIDLE=y CONFIG_VFP=y CONFIG_NEON=y # CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set @@ -143,6 +144,7 @@ CONFIG_MSM_MMCC_8960=y CONFIG_MSM_MMCC_8974=y CONFIG_MSM_IOMMU=y CONFIG_QCOM_GSBI=y +CONFIG_QCOM_PM=y CONFIG_PHY_QCOM_APQ8064_SATA=y CONFIG_PHY_QCOM_IPQ806X_SATA=y CONFIG_EXT2_FS=y diff --git a/arch/arm/configs/sama5_defconfig b/arch/arm/configs/sama5_defconfig index 510c747c6..31eb95188 100644 --- a/arch/arm/configs/sama5_defconfig +++ b/arch/arm/configs/sama5_defconfig @@ -136,6 +136,7 @@ CONFIG_POWER_RESET=y # CONFIG_HWMON is not set CONFIG_SSB=m CONFIG_REGULATOR=y +CONFIG_REGULATOR_FIXED_VOLTAGE=y CONFIG_REGULATOR_ACT8865=y CONFIG_MEDIA_SUPPORT=y CONFIG_MEDIA_CAMERA_SUPPORT=y diff --git a/arch/arm/configs/shmobile_defconfig b/arch/arm/configs/shmobile_defconfig index b58618e2d..9961fbd63 100644 --- a/arch/arm/configs/shmobile_defconfig +++ b/arch/arm/configs/shmobile_defconfig @@ -121,7 +121,6 @@ CONFIG_WATCHDOG=y CONFIG_DA9063_WATCHDOG=y CONFIG_MFD_AS3711=y CONFIG_MFD_DA9063=y -CONFIG_REGULATOR=y CONFIG_REGULATOR_AS3711=y CONFIG_REGULATOR_DA9210=y CONFIG_REGULATOR_GPIO=y @@ -160,7 +159,6 @@ CONFIG_USB_OHCI_HCD=y CONFIG_USB_R8A66597_HCD=y CONFIG_USB_RENESAS_USBHS=y CONFIG_USB_RCAR_PHY=y -CONFIG_USB_RCAR_GEN2_PHY=y CONFIG_USB_GADGET=y CONFIG_USB_RENESAS_USBHS_UDC=y CONFIG_USB_ETH=y @@ -182,6 +180,8 @@ CONFIG_IIO=y CONFIG_AK8975=y CONFIG_PWM=y CONFIG_PWM_RENESAS_TPU=y +CONFIG_GENERIC_PHY=y +CONFIG_PHY_RCAR_GEN2=y # CONFIG_DNOTIFY is not set CONFIG_MSDOS_FS=y CONFIG_VFAT_FS=y diff --git a/arch/arm/configs/stm32_defconfig b/arch/arm/configs/stm32_defconfig new file mode 100644 index 000000000..4725fab56 --- /dev/null +++ b/arch/arm/configs/stm32_defconfig @@ -0,0 +1,70 @@ +CONFIG_NO_HZ_IDLE=y +CONFIG_HIGH_RES_TIMERS=y +CONFIG_LOG_BUF_SHIFT=16 +CONFIG_BLK_DEV_INITRD=y +CONFIG_CC_OPTIMIZE_FOR_SIZE=y +# CONFIG_UID16 is not set +# CONFIG_BASE_FULL is not set +# CONFIG_FUTEX is not set +# CONFIG_EPOLL is not set +# CONFIG_SIGNALFD is not set +# CONFIG_EVENTFD is not set +# CONFIG_AIO is not set +CONFIG_EMBEDDED=y +# CONFIG_VM_EVENT_COUNTERS is not set +# CONFIG_SLUB_DEBUG is not set +# CONFIG_LBDAF is not set +# CONFIG_BLK_DEV_BSG is not set +# CONFIG_IOSCHED_DEADLINE is not set +# CONFIG_IOSCHED_CFQ is not set +# CONFIG_MMU is not set +CONFIG_ARM_SINGLE_ARMV7M=y +CONFIG_ARCH_STM32=y +CONFIG_SET_MEM_PARAM=y +CONFIG_DRAM_BASE=0x90000000 +CONFIG_FLASH_MEM_BASE=0x08000000 +CONFIG_FLASH_SIZE=0x00200000 +CONFIG_PREEMPT=y +# CONFIG_ATAGS is not set +CONFIG_ZBOOT_ROM_TEXT=0x0 +CONFIG_ZBOOT_ROM_BSS=0x0 +CONFIG_XIP_KERNEL=y +CONFIG_XIP_PHYS_ADDR=0x08008000 +CONFIG_BINFMT_FLAT=y +CONFIG_BINFMT_SHARED_FLAT=y +# CONFIG_COREDUMP is not set +CONFIG_DEVTMPFS=y +CONFIG_DEVTMPFS_MOUNT=y +# CONFIG_FW_LOADER is not set +# CONFIG_BLK_DEV is not set +CONFIG_EEPROM_93CX6=y +# CONFIG_INPUT is not set +# CONFIG_SERIO is not set +# CONFIG_VT is not set +# CONFIG_UNIX98_PTYS is not set +# CONFIG_LEGACY_PTYS is not set +CONFIG_SERIAL_NONSTANDARD=y +# CONFIG_DEVKMEM is not set +CONFIG_SERIAL_STM32=y +CONFIG_SERIAL_STM32_CONSOLE=y +# CONFIG_HW_RANDOM is not set +# CONFIG_HWMON is not set +# CONFIG_USB_SUPPORT is not set +CONFIG_NEW_LEDS=y +CONFIG_LEDS_CLASS=y +CONFIG_LEDS_TRIGGERS=y +CONFIG_LEDS_TRIGGER_HEARTBEAT=y +# CONFIG_FILE_LOCKING is not set +# CONFIG_DNOTIFY is not set +# CONFIG_INOTIFY_USER is not set +CONFIG_NLS=y +CONFIG_PRINTK_TIME=y +CONFIG_DEBUG_INFO=y +# CONFIG_ENABLE_WARN_DEPRECATED is not set +# CONFIG_ENABLE_MUST_CHECK is not set +CONFIG_MAGIC_SYSRQ=y +# CONFIG_SCHED_DEBUG is not set +# CONFIG_DEBUG_BUGVERBOSE is not set +# CONFIG_FTRACE is not set +CONFIG_CRC_ITU_T=y +CONFIG_CRC7=y diff --git a/arch/arm/configs/sunxi_defconfig b/arch/arm/configs/sunxi_defconfig index 8ecba00dc..7ebc346bf 100644 --- a/arch/arm/configs/sunxi_defconfig +++ b/arch/arm/configs/sunxi_defconfig @@ -2,6 +2,7 @@ CONFIG_NO_HZ=y CONFIG_HIGH_RES_TIMERS=y CONFIG_BLK_DEV_INITRD=y CONFIG_PERF_EVENTS=y +CONFIG_MODULES=y CONFIG_ARCH_SUNXI=y CONFIG_SMP=y CONFIG_NR_CPUS=8 @@ -77,7 +78,6 @@ CONFIG_SPI_SUN6I=y CONFIG_GPIO_SYSFS=y CONFIG_POWER_SUPPLY=y CONFIG_POWER_RESET=y -CONFIG_POWER_RESET_SUN6I=y CONFIG_THERMAL=y CONFIG_CPU_THERMAL=y CONFIG_WATCHDOG=y @@ -87,6 +87,10 @@ CONFIG_REGULATOR=y CONFIG_REGULATOR_FIXED_VOLTAGE=y CONFIG_REGULATOR_AXP20X=y CONFIG_REGULATOR_GPIO=y +CONFIG_FB=y +CONFIG_FB_SIMPLE=y +CONFIG_FRAMEBUFFER_CONSOLE=y +CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y CONFIG_USB=y CONFIG_USB_EHCI_HCD=y CONFIG_USB_EHCI_HCD_PLATFORM=y diff --git a/arch/arm/configs/tegra_defconfig b/arch/arm/configs/tegra_defconfig index d199eb249..cdf9abb46 100644 --- a/arch/arm/configs/tegra_defconfig +++ b/arch/arm/configs/tegra_defconfig @@ -154,6 +154,8 @@ CONFIG_POWER_RESET_AS3722=y CONFIG_POWER_RESET_GPIO=y CONFIG_SENSORS_LM90=y CONFIG_SENSORS_LM95245=y +CONFIG_WATCHDOG=y +CONFIG_TEGRA_WATCHDOG=y CONFIG_MFD_AS3722=y CONFIG_MFD_CROS_EC=y CONFIG_MFD_CROS_EC_SPI=y @@ -194,6 +196,14 @@ CONFIG_SOUND=y CONFIG_SND=y # CONFIG_SND_SUPPORT_OLD_API is not set # CONFIG_SND_DRIVERS is not set +CONFIG_SND_HDA=y +CONFIG_SND_HDA_TEGRA=y +CONFIG_SND_HDA_INPUT_BEEP=y +CONFIG_SND_HDA_INPUT_JACK=y +CONFIG_SND_HDA_PATCH_LOADER=y +CONFIG_SND_HDA_CODEC_REALTEK=y +CONFIG_SND_HDA_CODEC_HDMI=y +CONFIG_SND_HDA_GENERIC=y # CONFIG_SND_ARM is not set # CONFIG_SND_SPI is not set # CONFIG_SND_USB is not set diff --git a/arch/arm/configs/u8500_defconfig b/arch/arm/configs/u8500_defconfig index 6a1c9898f..07055eacb 100644 --- a/arch/arm/configs/u8500_defconfig +++ b/arch/arm/configs/u8500_defconfig @@ -4,6 +4,7 @@ CONFIG_NO_HZ_IDLE=y CONFIG_HIGH_RES_TIMERS=y CONFIG_BLK_DEV_INITRD=y CONFIG_KALLSYMS_ALL=y +CONFIG_PERF_EVENTS=y CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y # CONFIG_BLK_DEV_BSG is not set @@ -134,6 +135,10 @@ CONFIG_DEBUG_KERNEL=y # CONFIG_DEBUG_PREEMPT is not set # CONFIG_FTRACE is not set CONFIG_DEBUG_USER=y +CONFIG_CORESIGHT=y +CONFIG_CORESIGHT_SINK_TPIU=y +CONFIG_CORESIGHT_SINK_ETBV10=y +CONFIG_CORESIGHT_SOURCE_ETM3X=y CONFIG_CRYPTO_DEV_UX500=y CONFIG_CRYPTO_DEV_UX500_CRYP=y CONFIG_CRYPTO_DEV_UX500_HASH=y diff --git a/arch/arm/configs/vf610m4_defconfig b/arch/arm/configs/vf610m4_defconfig new file mode 100644 index 000000000..aeb2482c4 --- /dev/null +++ b/arch/arm/configs/vf610m4_defconfig @@ -0,0 +1,42 @@ +CONFIG_NAMESPACES=y +CONFIG_BLK_DEV_INITRD=y +# CONFIG_RD_BZIP2 is not set +# CONFIG_RD_LZMA is not set +# CONFIG_RD_XZ is not set +# CONFIG_RD_LZ4 is not set +CONFIG_KALLSYMS_ALL=y +CONFIG_EMBEDDED=y +# CONFIG_MMU is not set +CONFIG_ARM_SINGLE_ARMV7M=y +CONFIG_ARCH_MXC=y +CONFIG_SOC_VF610=y +CONFIG_SET_MEM_PARAM=y +CONFIG_DRAM_BASE=0x8c000000 +CONFIG_FLASH_MEM_BASE=0x8f000000 +CONFIG_FLASH_SIZE=0x01000000 +CONFIG_CMDLINE="console=/dev/ttyLP2" +CONFIG_XIP_KERNEL=y +CONFIG_XIP_PHYS_ADDR=0x0f000080 +CONFIG_BINFMT_FLAT=y +CONFIG_BINFMT_ZFLAT=y +CONFIG_BINFMT_SHARED_FLAT=y +# CONFIG_SUSPEND is not set +# CONFIG_UEVENT_HELPER is not set +# CONFIG_STANDALONE is not set +# CONFIG_PREVENT_FIRMWARE_BUILD is not set +# CONFIG_FIRMWARE_IN_KERNEL is not set +# CONFIG_ALLOW_DEV_COREDUMP is not set +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_COUNT=4 +# CONFIG_INPUT_MOUSEDEV is not set +# CONFIG_KEYBOARD_ATKBD is not set +# CONFIG_INPUT_MOUSE is not set +# CONFIG_SERIO is not set +CONFIG_SERIAL_FSL_LPUART=y +CONFIG_SERIAL_FSL_LPUART_CONSOLE=y +# CONFIG_HW_RANDOM is not set +CONFIG_MFD_SYSCON=y +# CONFIG_HID is not set +# CONFIG_USB_SUPPORT is not set +# CONFIG_MISC_FILESYSTEMS is not set +# CONFIG_FTRACE is not set diff --git a/arch/arm/configs/zx_defconfig b/arch/arm/configs/zx_defconfig new file mode 100644 index 000000000..b200bb0fe --- /dev/null +++ b/arch/arm/configs/zx_defconfig @@ -0,0 +1,129 @@ +CONFIG_EXPERIMENTAL=y +CONFIG_SYSVIPC=y +CONFIG_NO_HZ=y +CONFIG_HIGH_RES_TIMERS=y +CONFIG_LOG_BUF_SHIFT=14 +CONFIG_CGROUPS=y +CONFIG_CGROUP_DEBUG=y +CONFIG_CGROUP_FREEZER=y +CONFIG_CGROUP_CPUACCT=y +CONFIG_RESOURCE_COUNTERS=y +CONFIG_CGROUP_SCHED=y +CONFIG_RT_GROUP_SCHED=y +CONFIG_NAMESPACES=y +CONFIG_USER_NS=y +CONFIG_BLK_DEV_INITRD=y +CONFIG_SYSCTL_SYSCALL=y +CONFIG_KALLSYMS_ALL=y +CONFIG_EMBEDDED=y +CONFIG_PERF_EVENTS=y +CONFIG_SLAB=y +# CONFIG_BLK_DEV_BSG is not set +# CONFIG_IOSCHED_CFQ is not set +CONFIG_ARCH_ZX=y +CONFIG_SOC_ZX296702=y +# CONFIG_SWP_EMULATE is not set +CONFIG_ARM_ERRATA_754322=y +CONFIG_ARM_ERRATA_775420=y +CONFIG_SMP=y +CONFIG_VMSPLIT_2G=y +CONFIG_PREEMPT=y +CONFIG_AEABI=y +CONFIG_KSM=y +# CONFIG_IOMMU_SUPPORT is not set +CONFIG_VFP=y +CONFIG_NEON=y +CONFIG_KERNEL_MODE_NEON=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +CONFIG_HIBERNATION=y +CONFIG_PM_RUNTIME=y +CONFIG_PM_DEBUG=y +CONFIG_SUSPEND_TIME=y +CONFIG_ZBOOT_ROM_TEXT=0x0 +CONFIG_ZBOOT_ROM_BSS=0x0 +CONFIG_CMDLINE="console=ttyAMA0,115200 debug earlyprintk root=/dev/ram rw rootwait" +#CONFIG_NET is not set +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +CONFIG_DEVTMPFS=y +CONFIG_DEVTMPFS_MOUNT=y +CONFIG_DMA_CMA=y +CONFIG_CMA_SIZE_MBYTES=192 +CONFIG_BLK_DEV_LOOP=y +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_COUNT=1 +CONFIG_BLK_DEV_RAM_SIZE=8192 +CONFIG_UID_STAT=y +CONFIG_SCSI=y +CONFIG_BLK_DEV_SD=y +CONFIG_CHR_DEV_SG=y +CONFIG_CHR_DEV_SCH=y +CONFIG_SCSI_MULTI_LUN=y +CONFIG_MD=y +CONFIG_BLK_DEV_DM=y +CONFIG_DM_CRYPT=y +CONFIG_DM_UEVENT=y +CONFIG_DM_VERITY=y +CONFIG_NETDEVICES=y +# CONFIG_INPUT_MOUSE is not set +CONFIG_SERIO=y +CONFIG_SERIO_LIBPS2=y +CONFIG_SPI=y +CONFIG_LOGO=y +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +CONFIG_CONSOLE_POLL=y +CONFIG_SERIAL_AMBA_PL011=y +CONFIG_SERIAL_AMBA_PL011_CONSOLE=y +CONFIG_SERIAL_OF_PLATFORM=y +# CONFIG_LEGACY_PTYS is not set +# CONFIG_HW_RANDOM is not set +# CONFIG_HWMON is not set +# CONFIG_USB_SUPPORT is not set +CONFIG_MMC=y +CONFIG_MMC_UNSAFE_RESUME=y +CONFIG_MMC_BLOCK_MINORS=16 +CONFIG_MMC_DW=y +CONFIG_MMC_DW_IDMAC=y +CONFIG_EXT2_FS=y +CONFIG_EXT4_FS=y +CONFIG_EXT4_FS_POSIX_ACL=y +CONFIG_EXT4_FS_SECURITY=y +CONFIG_EXT4_DEBUG=y +CONFIG_FUSE_FS=y +CONFIG_MSDOS_FS=y +CONFIG_VFAT_FS=y +CONFIG_FAT_DEFAULT_CODEPAGE=936 +CONFIG_TMPFS=y +CONFIG_TMPFS_POSIX_ACL=y +#CONFIG_NFS_FS is not set +CONFIG_NLS_CODEPAGE_936=y +CONFIG_NLS_ISO8859_1=y +CONFIG_NLS_UTF8=y +CONFIG_PRINTK_TIME=y +CONFIG_MAGIC_SYSRQ=y +CONFIG_DEBUG_KERNEL=y +CONFIG_DEBUG_INFO=y +CONFIG_FRAME_WARN=4096 +CONFIG_DEBUG_FS=y +CONFIG_DEBUG_MEMORY_INIT=y +CONFIG_PANIC_TIMEOUT=5 +# CONFIG_SCHED_DEBUG is not set +CONFIG_SCHEDSTATS=y +CONFIG_TIMER_STATS=y +CONFIG_DEBUG_RT_MUTEXES=y +CONFIG_DEBUG_SPINLOCK=y +CONFIG_DEBUG_MUTEXES=y +CONFIG_RCU_CPU_STALL_TIMEOUT=60 +# CONFIG_FTRACE is not set +CONFIG_KGDB=y +CONFIG_KGDB_KDB=y +# CONFIG_ARM_UNWIND is not set +CONFIG_DEBUG_PREEMPT=y +CONFIG_DEBUG_USER=y +CONFIG_DEBUG_LL=y +CONFIG_DYNAMIC_DEBUG=y +CONFIG_STACKTRACE=y +CONFIG_DEBUG_ZTE_ZX=y +CONFIG_EARLY_PRINTK=y +CONFIG_CRYPTO_LZO=y +CONFIG_GPIOLIB=y diff --git a/arch/arm/crypto/Kconfig b/arch/arm/crypto/Kconfig index 8da2207b0..27ed1b1cd 100644 --- a/arch/arm/crypto/Kconfig +++ b/arch/arm/crypto/Kconfig @@ -53,20 +53,13 @@ config CRYPTO_SHA256_ARM SHA-256 secure hash standard (DFIPS 180-2) implemented using optimized ARM assembler and NEON, when available. -config CRYPTO_SHA512_ARM_NEON - tristate "SHA384 and SHA512 digest algorithm (ARM NEON)" - depends on KERNEL_MODE_NEON - select CRYPTO_SHA512 +config CRYPTO_SHA512_ARM + tristate "SHA-384/512 digest algorithm (ARM-asm and NEON)" select CRYPTO_HASH + depends on !CPU_V7M help SHA-512 secure hash standard (DFIPS 180-2) implemented - using ARM NEON instructions, when available. - - This version of SHA implements a 512 bit hash with 256 bits of - security against collision attacks. - - This code also includes SHA-384, a 384 bit hash with 192 bits - of security against collision attacks. + using optimized ARM assembler and NEON, when available. config CRYPTO_AES_ARM tristate "AES cipher algorithms (ARM-asm)" diff --git a/arch/arm/crypto/Makefile b/arch/arm/crypto/Makefile index 6ea828241..fc5150702 100644 --- a/arch/arm/crypto/Makefile +++ b/arch/arm/crypto/Makefile @@ -7,7 +7,7 @@ obj-$(CONFIG_CRYPTO_AES_ARM_BS) += aes-arm-bs.o obj-$(CONFIG_CRYPTO_SHA1_ARM) += sha1-arm.o obj-$(CONFIG_CRYPTO_SHA1_ARM_NEON) += sha1-arm-neon.o obj-$(CONFIG_CRYPTO_SHA256_ARM) += sha256-arm.o -obj-$(CONFIG_CRYPTO_SHA512_ARM_NEON) += sha512-arm-neon.o +obj-$(CONFIG_CRYPTO_SHA512_ARM) += sha512-arm.o ce-obj-$(CONFIG_CRYPTO_AES_ARM_CE) += aes-arm-ce.o ce-obj-$(CONFIG_CRYPTO_SHA1_ARM_CE) += sha1-arm-ce.o @@ -30,7 +30,8 @@ sha1-arm-y := sha1-armv4-large.o sha1_glue.o sha1-arm-neon-y := sha1-armv7-neon.o sha1_neon_glue.o sha256-arm-neon-$(CONFIG_KERNEL_MODE_NEON) := sha256_neon_glue.o sha256-arm-y := sha256-core.o sha256_glue.o $(sha256-arm-neon-y) -sha512-arm-neon-y := sha512-armv7-neon.o sha512_neon_glue.o +sha512-arm-neon-$(CONFIG_KERNEL_MODE_NEON) := sha512-neon-glue.o +sha512-arm-y := sha512-core.o sha512-glue.o $(sha512-arm-neon-y) sha1-arm-ce-y := sha1-ce-core.o sha1-ce-glue.o sha2-arm-ce-y := sha2-ce-core.o sha2-ce-glue.o aes-arm-ce-y := aes-ce-core.o aes-ce-glue.o @@ -45,4 +46,7 @@ $(src)/aesbs-core.S_shipped: $(src)/bsaes-armv7.pl $(src)/sha256-core.S_shipped: $(src)/sha256-armv4.pl $(call cmd,perl) -.PRECIOUS: $(obj)/aesbs-core.S $(obj)/sha256-core.S +$(src)/sha512-core.S_shipped: $(src)/sha512-armv4.pl + $(call cmd,perl) + +.PRECIOUS: $(obj)/aesbs-core.S $(obj)/sha256-core.S $(obj)/sha512-core.S diff --git a/arch/arm/crypto/aes-ce-core.S b/arch/arm/crypto/aes-ce-core.S index 8cfa468ee..987aa632c 100644 --- a/arch/arm/crypto/aes-ce-core.S +++ b/arch/arm/crypto/aes-ce-core.S @@ -101,15 +101,14 @@ \dround q10, q11 blo 0f @ AES-128: 10 rounds vld1.8 {q10-q11}, [ip]! - beq 1f @ AES-192: 12 rounds \dround q12, q13 + beq 1f @ AES-192: 12 rounds vld1.8 {q12-q13}, [ip] \dround q10, q11 0: \fround q12, q13, q14 bx lr -1: \dround q12, q13 - \fround q10, q11, q14 +1: \fround q10, q11, q14 bx lr .endm @@ -122,8 +121,8 @@ * q2 : third in/output block (_3x version only) * q8 : first round key * q9 : secound round key - * ip : address of 3rd round key * q14 : final round key + * r2 : address of round key array * r3 : number of rounds */ .align 6 diff --git a/arch/arm/crypto/sha512-armv4.pl b/arch/arm/crypto/sha512-armv4.pl new file mode 100644 index 000000000..a2b11a844 --- /dev/null +++ b/arch/arm/crypto/sha512-armv4.pl @@ -0,0 +1,649 @@ +#!/usr/bin/env perl + +# ==================================================================== +# Written by Andy Polyakov <appro@openssl.org> for the OpenSSL +# project. The module is, however, dual licensed under OpenSSL and +# CRYPTOGAMS licenses depending on where you obtain it. For further +# details see http://www.openssl.org/~appro/cryptogams/. +# +# Permission to use under GPL terms is granted. +# ==================================================================== + +# SHA512 block procedure for ARMv4. September 2007. + +# This code is ~4.5 (four and a half) times faster than code generated +# by gcc 3.4 and it spends ~72 clock cycles per byte [on single-issue +# Xscale PXA250 core]. +# +# July 2010. +# +# Rescheduling for dual-issue pipeline resulted in 6% improvement on +# Cortex A8 core and ~40 cycles per processed byte. + +# February 2011. +# +# Profiler-assisted and platform-specific optimization resulted in 7% +# improvement on Coxtex A8 core and ~38 cycles per byte. + +# March 2011. +# +# Add NEON implementation. On Cortex A8 it was measured to process +# one byte in 23.3 cycles or ~60% faster than integer-only code. + +# August 2012. +# +# Improve NEON performance by 12% on Snapdragon S4. In absolute +# terms it's 22.6 cycles per byte, which is disappointing result. +# Technical writers asserted that 3-way S4 pipeline can sustain +# multiple NEON instructions per cycle, but dual NEON issue could +# not be observed, see http://www.openssl.org/~appro/Snapdragon-S4.html +# for further details. On side note Cortex-A15 processes one byte in +# 16 cycles. + +# Byte order [in]dependence. ========================================= +# +# Originally caller was expected to maintain specific *dword* order in +# h[0-7], namely with most significant dword at *lower* address, which +# was reflected in below two parameters as 0 and 4. Now caller is +# expected to maintain native byte order for whole 64-bit values. +$hi="HI"; +$lo="LO"; +# ==================================================================== + +while (($output=shift) && ($output!~/^\w[\w\-]*\.\w+$/)) {} +open STDOUT,">$output"; + +$ctx="r0"; # parameter block +$inp="r1"; +$len="r2"; + +$Tlo="r3"; +$Thi="r4"; +$Alo="r5"; +$Ahi="r6"; +$Elo="r7"; +$Ehi="r8"; +$t0="r9"; +$t1="r10"; +$t2="r11"; +$t3="r12"; +############ r13 is stack pointer +$Ktbl="r14"; +############ r15 is program counter + +$Aoff=8*0; +$Boff=8*1; +$Coff=8*2; +$Doff=8*3; +$Eoff=8*4; +$Foff=8*5; +$Goff=8*6; +$Hoff=8*7; +$Xoff=8*8; + +sub BODY_00_15() { +my $magic = shift; +$code.=<<___; + @ Sigma1(x) (ROTR((x),14) ^ ROTR((x),18) ^ ROTR((x),41)) + @ LO lo>>14^hi<<18 ^ lo>>18^hi<<14 ^ hi>>9^lo<<23 + @ HI hi>>14^lo<<18 ^ hi>>18^lo<<14 ^ lo>>9^hi<<23 + mov $t0,$Elo,lsr#14 + str $Tlo,[sp,#$Xoff+0] + mov $t1,$Ehi,lsr#14 + str $Thi,[sp,#$Xoff+4] + eor $t0,$t0,$Ehi,lsl#18 + ldr $t2,[sp,#$Hoff+0] @ h.lo + eor $t1,$t1,$Elo,lsl#18 + ldr $t3,[sp,#$Hoff+4] @ h.hi + eor $t0,$t0,$Elo,lsr#18 + eor $t1,$t1,$Ehi,lsr#18 + eor $t0,$t0,$Ehi,lsl#14 + eor $t1,$t1,$Elo,lsl#14 + eor $t0,$t0,$Ehi,lsr#9 + eor $t1,$t1,$Elo,lsr#9 + eor $t0,$t0,$Elo,lsl#23 + eor $t1,$t1,$Ehi,lsl#23 @ Sigma1(e) + adds $Tlo,$Tlo,$t0 + ldr $t0,[sp,#$Foff+0] @ f.lo + adc $Thi,$Thi,$t1 @ T += Sigma1(e) + ldr $t1,[sp,#$Foff+4] @ f.hi + adds $Tlo,$Tlo,$t2 + ldr $t2,[sp,#$Goff+0] @ g.lo + adc $Thi,$Thi,$t3 @ T += h + ldr $t3,[sp,#$Goff+4] @ g.hi + + eor $t0,$t0,$t2 + str $Elo,[sp,#$Eoff+0] + eor $t1,$t1,$t3 + str $Ehi,[sp,#$Eoff+4] + and $t0,$t0,$Elo + str $Alo,[sp,#$Aoff+0] + and $t1,$t1,$Ehi + str $Ahi,[sp,#$Aoff+4] + eor $t0,$t0,$t2 + ldr $t2,[$Ktbl,#$lo] @ K[i].lo + eor $t1,$t1,$t3 @ Ch(e,f,g) + ldr $t3,[$Ktbl,#$hi] @ K[i].hi + + adds $Tlo,$Tlo,$t0 + ldr $Elo,[sp,#$Doff+0] @ d.lo + adc $Thi,$Thi,$t1 @ T += Ch(e,f,g) + ldr $Ehi,[sp,#$Doff+4] @ d.hi + adds $Tlo,$Tlo,$t2 + and $t0,$t2,#0xff + adc $Thi,$Thi,$t3 @ T += K[i] + adds $Elo,$Elo,$Tlo + ldr $t2,[sp,#$Boff+0] @ b.lo + adc $Ehi,$Ehi,$Thi @ d += T + teq $t0,#$magic + + ldr $t3,[sp,#$Coff+0] @ c.lo +#if __ARM_ARCH__>=7 + it eq @ Thumb2 thing, sanity check in ARM +#endif + orreq $Ktbl,$Ktbl,#1 + @ Sigma0(x) (ROTR((x),28) ^ ROTR((x),34) ^ ROTR((x),39)) + @ LO lo>>28^hi<<4 ^ hi>>2^lo<<30 ^ hi>>7^lo<<25 + @ HI hi>>28^lo<<4 ^ lo>>2^hi<<30 ^ lo>>7^hi<<25 + mov $t0,$Alo,lsr#28 + mov $t1,$Ahi,lsr#28 + eor $t0,$t0,$Ahi,lsl#4 + eor $t1,$t1,$Alo,lsl#4 + eor $t0,$t0,$Ahi,lsr#2 + eor $t1,$t1,$Alo,lsr#2 + eor $t0,$t0,$Alo,lsl#30 + eor $t1,$t1,$Ahi,lsl#30 + eor $t0,$t0,$Ahi,lsr#7 + eor $t1,$t1,$Alo,lsr#7 + eor $t0,$t0,$Alo,lsl#25 + eor $t1,$t1,$Ahi,lsl#25 @ Sigma0(a) + adds $Tlo,$Tlo,$t0 + and $t0,$Alo,$t2 + adc $Thi,$Thi,$t1 @ T += Sigma0(a) + + ldr $t1,[sp,#$Boff+4] @ b.hi + orr $Alo,$Alo,$t2 + ldr $t2,[sp,#$Coff+4] @ c.hi + and $Alo,$Alo,$t3 + and $t3,$Ahi,$t1 + orr $Ahi,$Ahi,$t1 + orr $Alo,$Alo,$t0 @ Maj(a,b,c).lo + and $Ahi,$Ahi,$t2 + adds $Alo,$Alo,$Tlo + orr $Ahi,$Ahi,$t3 @ Maj(a,b,c).hi + sub sp,sp,#8 + adc $Ahi,$Ahi,$Thi @ h += T + tst $Ktbl,#1 + add $Ktbl,$Ktbl,#8 +___ +} +$code=<<___; +#ifndef __KERNEL__ +# include "arm_arch.h" +# define VFP_ABI_PUSH vstmdb sp!,{d8-d15} +# define VFP_ABI_POP vldmia sp!,{d8-d15} +#else +# define __ARM_ARCH__ __LINUX_ARM_ARCH__ +# define __ARM_MAX_ARCH__ 7 +# define VFP_ABI_PUSH +# define VFP_ABI_POP +#endif + +#ifdef __ARMEL__ +# define LO 0 +# define HI 4 +# define WORD64(hi0,lo0,hi1,lo1) .word lo0,hi0, lo1,hi1 +#else +# define HI 0 +# define LO 4 +# define WORD64(hi0,lo0,hi1,lo1) .word hi0,lo0, hi1,lo1 +#endif + +.text +#if __ARM_ARCH__<7 +.code 32 +#else +.syntax unified +# ifdef __thumb2__ +# define adrl adr +.thumb +# else +.code 32 +# endif +#endif + +.type K512,%object +.align 5 +K512: +WORD64(0x428a2f98,0xd728ae22, 0x71374491,0x23ef65cd) +WORD64(0xb5c0fbcf,0xec4d3b2f, 0xe9b5dba5,0x8189dbbc) +WORD64(0x3956c25b,0xf348b538, 0x59f111f1,0xb605d019) +WORD64(0x923f82a4,0xaf194f9b, 0xab1c5ed5,0xda6d8118) +WORD64(0xd807aa98,0xa3030242, 0x12835b01,0x45706fbe) +WORD64(0x243185be,0x4ee4b28c, 0x550c7dc3,0xd5ffb4e2) +WORD64(0x72be5d74,0xf27b896f, 0x80deb1fe,0x3b1696b1) +WORD64(0x9bdc06a7,0x25c71235, 0xc19bf174,0xcf692694) +WORD64(0xe49b69c1,0x9ef14ad2, 0xefbe4786,0x384f25e3) +WORD64(0x0fc19dc6,0x8b8cd5b5, 0x240ca1cc,0x77ac9c65) +WORD64(0x2de92c6f,0x592b0275, 0x4a7484aa,0x6ea6e483) +WORD64(0x5cb0a9dc,0xbd41fbd4, 0x76f988da,0x831153b5) +WORD64(0x983e5152,0xee66dfab, 0xa831c66d,0x2db43210) +WORD64(0xb00327c8,0x98fb213f, 0xbf597fc7,0xbeef0ee4) +WORD64(0xc6e00bf3,0x3da88fc2, 0xd5a79147,0x930aa725) +WORD64(0x06ca6351,0xe003826f, 0x14292967,0x0a0e6e70) +WORD64(0x27b70a85,0x46d22ffc, 0x2e1b2138,0x5c26c926) +WORD64(0x4d2c6dfc,0x5ac42aed, 0x53380d13,0x9d95b3df) +WORD64(0x650a7354,0x8baf63de, 0x766a0abb,0x3c77b2a8) +WORD64(0x81c2c92e,0x47edaee6, 0x92722c85,0x1482353b) +WORD64(0xa2bfe8a1,0x4cf10364, 0xa81a664b,0xbc423001) +WORD64(0xc24b8b70,0xd0f89791, 0xc76c51a3,0x0654be30) +WORD64(0xd192e819,0xd6ef5218, 0xd6990624,0x5565a910) +WORD64(0xf40e3585,0x5771202a, 0x106aa070,0x32bbd1b8) +WORD64(0x19a4c116,0xb8d2d0c8, 0x1e376c08,0x5141ab53) +WORD64(0x2748774c,0xdf8eeb99, 0x34b0bcb5,0xe19b48a8) +WORD64(0x391c0cb3,0xc5c95a63, 0x4ed8aa4a,0xe3418acb) +WORD64(0x5b9cca4f,0x7763e373, 0x682e6ff3,0xd6b2b8a3) +WORD64(0x748f82ee,0x5defb2fc, 0x78a5636f,0x43172f60) +WORD64(0x84c87814,0xa1f0ab72, 0x8cc70208,0x1a6439ec) +WORD64(0x90befffa,0x23631e28, 0xa4506ceb,0xde82bde9) +WORD64(0xbef9a3f7,0xb2c67915, 0xc67178f2,0xe372532b) +WORD64(0xca273ece,0xea26619c, 0xd186b8c7,0x21c0c207) +WORD64(0xeada7dd6,0xcde0eb1e, 0xf57d4f7f,0xee6ed178) +WORD64(0x06f067aa,0x72176fba, 0x0a637dc5,0xa2c898a6) +WORD64(0x113f9804,0xbef90dae, 0x1b710b35,0x131c471b) +WORD64(0x28db77f5,0x23047d84, 0x32caab7b,0x40c72493) +WORD64(0x3c9ebe0a,0x15c9bebc, 0x431d67c4,0x9c100d4c) +WORD64(0x4cc5d4be,0xcb3e42b6, 0x597f299c,0xfc657e2a) +WORD64(0x5fcb6fab,0x3ad6faec, 0x6c44198c,0x4a475817) +.size K512,.-K512 +#if __ARM_MAX_ARCH__>=7 && !defined(__KERNEL__) +.LOPENSSL_armcap: +.word OPENSSL_armcap_P-sha512_block_data_order +.skip 32-4 +#else +.skip 32 +#endif + +.global sha512_block_data_order +.type sha512_block_data_order,%function +sha512_block_data_order: +#if __ARM_ARCH__<7 + sub r3,pc,#8 @ sha512_block_data_order +#else + adr r3,sha512_block_data_order +#endif +#if __ARM_MAX_ARCH__>=7 && !defined(__KERNEL__) + ldr r12,.LOPENSSL_armcap + ldr r12,[r3,r12] @ OPENSSL_armcap_P + tst r12,#1 + bne .LNEON +#endif + add $len,$inp,$len,lsl#7 @ len to point at the end of inp + stmdb sp!,{r4-r12,lr} + sub $Ktbl,r3,#672 @ K512 + sub sp,sp,#9*8 + + ldr $Elo,[$ctx,#$Eoff+$lo] + ldr $Ehi,[$ctx,#$Eoff+$hi] + ldr $t0, [$ctx,#$Goff+$lo] + ldr $t1, [$ctx,#$Goff+$hi] + ldr $t2, [$ctx,#$Hoff+$lo] + ldr $t3, [$ctx,#$Hoff+$hi] +.Loop: + str $t0, [sp,#$Goff+0] + str $t1, [sp,#$Goff+4] + str $t2, [sp,#$Hoff+0] + str $t3, [sp,#$Hoff+4] + ldr $Alo,[$ctx,#$Aoff+$lo] + ldr $Ahi,[$ctx,#$Aoff+$hi] + ldr $Tlo,[$ctx,#$Boff+$lo] + ldr $Thi,[$ctx,#$Boff+$hi] + ldr $t0, [$ctx,#$Coff+$lo] + ldr $t1, [$ctx,#$Coff+$hi] + ldr $t2, [$ctx,#$Doff+$lo] + ldr $t3, [$ctx,#$Doff+$hi] + str $Tlo,[sp,#$Boff+0] + str $Thi,[sp,#$Boff+4] + str $t0, [sp,#$Coff+0] + str $t1, [sp,#$Coff+4] + str $t2, [sp,#$Doff+0] + str $t3, [sp,#$Doff+4] + ldr $Tlo,[$ctx,#$Foff+$lo] + ldr $Thi,[$ctx,#$Foff+$hi] + str $Tlo,[sp,#$Foff+0] + str $Thi,[sp,#$Foff+4] + +.L00_15: +#if __ARM_ARCH__<7 + ldrb $Tlo,[$inp,#7] + ldrb $t0, [$inp,#6] + ldrb $t1, [$inp,#5] + ldrb $t2, [$inp,#4] + ldrb $Thi,[$inp,#3] + ldrb $t3, [$inp,#2] + orr $Tlo,$Tlo,$t0,lsl#8 + ldrb $t0, [$inp,#1] + orr $Tlo,$Tlo,$t1,lsl#16 + ldrb $t1, [$inp],#8 + orr $Tlo,$Tlo,$t2,lsl#24 + orr $Thi,$Thi,$t3,lsl#8 + orr $Thi,$Thi,$t0,lsl#16 + orr $Thi,$Thi,$t1,lsl#24 +#else + ldr $Tlo,[$inp,#4] + ldr $Thi,[$inp],#8 +#ifdef __ARMEL__ + rev $Tlo,$Tlo + rev $Thi,$Thi +#endif +#endif +___ + &BODY_00_15(0x94); +$code.=<<___; + tst $Ktbl,#1 + beq .L00_15 + ldr $t0,[sp,#`$Xoff+8*(16-1)`+0] + ldr $t1,[sp,#`$Xoff+8*(16-1)`+4] + bic $Ktbl,$Ktbl,#1 +.L16_79: + @ sigma0(x) (ROTR((x),1) ^ ROTR((x),8) ^ ((x)>>7)) + @ LO lo>>1^hi<<31 ^ lo>>8^hi<<24 ^ lo>>7^hi<<25 + @ HI hi>>1^lo<<31 ^ hi>>8^lo<<24 ^ hi>>7 + mov $Tlo,$t0,lsr#1 + ldr $t2,[sp,#`$Xoff+8*(16-14)`+0] + mov $Thi,$t1,lsr#1 + ldr $t3,[sp,#`$Xoff+8*(16-14)`+4] + eor $Tlo,$Tlo,$t1,lsl#31 + eor $Thi,$Thi,$t0,lsl#31 + eor $Tlo,$Tlo,$t0,lsr#8 + eor $Thi,$Thi,$t1,lsr#8 + eor $Tlo,$Tlo,$t1,lsl#24 + eor $Thi,$Thi,$t0,lsl#24 + eor $Tlo,$Tlo,$t0,lsr#7 + eor $Thi,$Thi,$t1,lsr#7 + eor $Tlo,$Tlo,$t1,lsl#25 + + @ sigma1(x) (ROTR((x),19) ^ ROTR((x),61) ^ ((x)>>6)) + @ LO lo>>19^hi<<13 ^ hi>>29^lo<<3 ^ lo>>6^hi<<26 + @ HI hi>>19^lo<<13 ^ lo>>29^hi<<3 ^ hi>>6 + mov $t0,$t2,lsr#19 + mov $t1,$t3,lsr#19 + eor $t0,$t0,$t3,lsl#13 + eor $t1,$t1,$t2,lsl#13 + eor $t0,$t0,$t3,lsr#29 + eor $t1,$t1,$t2,lsr#29 + eor $t0,$t0,$t2,lsl#3 + eor $t1,$t1,$t3,lsl#3 + eor $t0,$t0,$t2,lsr#6 + eor $t1,$t1,$t3,lsr#6 + ldr $t2,[sp,#`$Xoff+8*(16-9)`+0] + eor $t0,$t0,$t3,lsl#26 + + ldr $t3,[sp,#`$Xoff+8*(16-9)`+4] + adds $Tlo,$Tlo,$t0 + ldr $t0,[sp,#`$Xoff+8*16`+0] + adc $Thi,$Thi,$t1 + + ldr $t1,[sp,#`$Xoff+8*16`+4] + adds $Tlo,$Tlo,$t2 + adc $Thi,$Thi,$t3 + adds $Tlo,$Tlo,$t0 + adc $Thi,$Thi,$t1 +___ + &BODY_00_15(0x17); +$code.=<<___; +#if __ARM_ARCH__>=7 + ittt eq @ Thumb2 thing, sanity check in ARM +#endif + ldreq $t0,[sp,#`$Xoff+8*(16-1)`+0] + ldreq $t1,[sp,#`$Xoff+8*(16-1)`+4] + beq .L16_79 + bic $Ktbl,$Ktbl,#1 + + ldr $Tlo,[sp,#$Boff+0] + ldr $Thi,[sp,#$Boff+4] + ldr $t0, [$ctx,#$Aoff+$lo] + ldr $t1, [$ctx,#$Aoff+$hi] + ldr $t2, [$ctx,#$Boff+$lo] + ldr $t3, [$ctx,#$Boff+$hi] + adds $t0,$Alo,$t0 + str $t0, [$ctx,#$Aoff+$lo] + adc $t1,$Ahi,$t1 + str $t1, [$ctx,#$Aoff+$hi] + adds $t2,$Tlo,$t2 + str $t2, [$ctx,#$Boff+$lo] + adc $t3,$Thi,$t3 + str $t3, [$ctx,#$Boff+$hi] + + ldr $Alo,[sp,#$Coff+0] + ldr $Ahi,[sp,#$Coff+4] + ldr $Tlo,[sp,#$Doff+0] + ldr $Thi,[sp,#$Doff+4] + ldr $t0, [$ctx,#$Coff+$lo] + ldr $t1, [$ctx,#$Coff+$hi] + ldr $t2, [$ctx,#$Doff+$lo] + ldr $t3, [$ctx,#$Doff+$hi] + adds $t0,$Alo,$t0 + str $t0, [$ctx,#$Coff+$lo] + adc $t1,$Ahi,$t1 + str $t1, [$ctx,#$Coff+$hi] + adds $t2,$Tlo,$t2 + str $t2, [$ctx,#$Doff+$lo] + adc $t3,$Thi,$t3 + str $t3, [$ctx,#$Doff+$hi] + + ldr $Tlo,[sp,#$Foff+0] + ldr $Thi,[sp,#$Foff+4] + ldr $t0, [$ctx,#$Eoff+$lo] + ldr $t1, [$ctx,#$Eoff+$hi] + ldr $t2, [$ctx,#$Foff+$lo] + ldr $t3, [$ctx,#$Foff+$hi] + adds $Elo,$Elo,$t0 + str $Elo,[$ctx,#$Eoff+$lo] + adc $Ehi,$Ehi,$t1 + str $Ehi,[$ctx,#$Eoff+$hi] + adds $t2,$Tlo,$t2 + str $t2, [$ctx,#$Foff+$lo] + adc $t3,$Thi,$t3 + str $t3, [$ctx,#$Foff+$hi] + + ldr $Alo,[sp,#$Goff+0] + ldr $Ahi,[sp,#$Goff+4] + ldr $Tlo,[sp,#$Hoff+0] + ldr $Thi,[sp,#$Hoff+4] + ldr $t0, [$ctx,#$Goff+$lo] + ldr $t1, [$ctx,#$Goff+$hi] + ldr $t2, [$ctx,#$Hoff+$lo] + ldr $t3, [$ctx,#$Hoff+$hi] + adds $t0,$Alo,$t0 + str $t0, [$ctx,#$Goff+$lo] + adc $t1,$Ahi,$t1 + str $t1, [$ctx,#$Goff+$hi] + adds $t2,$Tlo,$t2 + str $t2, [$ctx,#$Hoff+$lo] + adc $t3,$Thi,$t3 + str $t3, [$ctx,#$Hoff+$hi] + + add sp,sp,#640 + sub $Ktbl,$Ktbl,#640 + + teq $inp,$len + bne .Loop + + add sp,sp,#8*9 @ destroy frame +#if __ARM_ARCH__>=5 + ldmia sp!,{r4-r12,pc} +#else + ldmia sp!,{r4-r12,lr} + tst lr,#1 + moveq pc,lr @ be binary compatible with V4, yet + bx lr @ interoperable with Thumb ISA:-) +#endif +.size sha512_block_data_order,.-sha512_block_data_order +___ + +{ +my @Sigma0=(28,34,39); +my @Sigma1=(14,18,41); +my @sigma0=(1, 8, 7); +my @sigma1=(19,61,6); + +my $Ktbl="r3"; +my $cnt="r12"; # volatile register known as ip, intra-procedure-call scratch + +my @X=map("d$_",(0..15)); +my @V=($A,$B,$C,$D,$E,$F,$G,$H)=map("d$_",(16..23)); + +sub NEON_00_15() { +my $i=shift; +my ($a,$b,$c,$d,$e,$f,$g,$h)=@_; +my ($t0,$t1,$t2,$T1,$K,$Ch,$Maj)=map("d$_",(24..31)); # temps + +$code.=<<___ if ($i<16 || $i&1); + vshr.u64 $t0,$e,#@Sigma1[0] @ $i +#if $i<16 + vld1.64 {@X[$i%16]},[$inp]! @ handles unaligned +#endif + vshr.u64 $t1,$e,#@Sigma1[1] +#if $i>0 + vadd.i64 $a,$Maj @ h+=Maj from the past +#endif + vshr.u64 $t2,$e,#@Sigma1[2] +___ +$code.=<<___; + vld1.64 {$K},[$Ktbl,:64]! @ K[i++] + vsli.64 $t0,$e,#`64-@Sigma1[0]` + vsli.64 $t1,$e,#`64-@Sigma1[1]` + vmov $Ch,$e + vsli.64 $t2,$e,#`64-@Sigma1[2]` +#if $i<16 && defined(__ARMEL__) + vrev64.8 @X[$i],@X[$i] +#endif + veor $t1,$t0 + vbsl $Ch,$f,$g @ Ch(e,f,g) + vshr.u64 $t0,$a,#@Sigma0[0] + veor $t2,$t1 @ Sigma1(e) + vadd.i64 $T1,$Ch,$h + vshr.u64 $t1,$a,#@Sigma0[1] + vsli.64 $t0,$a,#`64-@Sigma0[0]` + vadd.i64 $T1,$t2 + vshr.u64 $t2,$a,#@Sigma0[2] + vadd.i64 $K,@X[$i%16] + vsli.64 $t1,$a,#`64-@Sigma0[1]` + veor $Maj,$a,$b + vsli.64 $t2,$a,#`64-@Sigma0[2]` + veor $h,$t0,$t1 + vadd.i64 $T1,$K + vbsl $Maj,$c,$b @ Maj(a,b,c) + veor $h,$t2 @ Sigma0(a) + vadd.i64 $d,$T1 + vadd.i64 $Maj,$T1 + @ vadd.i64 $h,$Maj +___ +} + +sub NEON_16_79() { +my $i=shift; + +if ($i&1) { &NEON_00_15($i,@_); return; } + +# 2x-vectorized, therefore runs every 2nd round +my @X=map("q$_",(0..7)); # view @X as 128-bit vector +my ($t0,$t1,$s0,$s1) = map("q$_",(12..15)); # temps +my ($d0,$d1,$d2) = map("d$_",(24..26)); # temps from NEON_00_15 +my $e=@_[4]; # $e from NEON_00_15 +$i /= 2; +$code.=<<___; + vshr.u64 $t0,@X[($i+7)%8],#@sigma1[0] + vshr.u64 $t1,@X[($i+7)%8],#@sigma1[1] + vadd.i64 @_[0],d30 @ h+=Maj from the past + vshr.u64 $s1,@X[($i+7)%8],#@sigma1[2] + vsli.64 $t0,@X[($i+7)%8],#`64-@sigma1[0]` + vext.8 $s0,@X[$i%8],@X[($i+1)%8],#8 @ X[i+1] + vsli.64 $t1,@X[($i+7)%8],#`64-@sigma1[1]` + veor $s1,$t0 + vshr.u64 $t0,$s0,#@sigma0[0] + veor $s1,$t1 @ sigma1(X[i+14]) + vshr.u64 $t1,$s0,#@sigma0[1] + vadd.i64 @X[$i%8],$s1 + vshr.u64 $s1,$s0,#@sigma0[2] + vsli.64 $t0,$s0,#`64-@sigma0[0]` + vsli.64 $t1,$s0,#`64-@sigma0[1]` + vext.8 $s0,@X[($i+4)%8],@X[($i+5)%8],#8 @ X[i+9] + veor $s1,$t0 + vshr.u64 $d0,$e,#@Sigma1[0] @ from NEON_00_15 + vadd.i64 @X[$i%8],$s0 + vshr.u64 $d1,$e,#@Sigma1[1] @ from NEON_00_15 + veor $s1,$t1 @ sigma0(X[i+1]) + vshr.u64 $d2,$e,#@Sigma1[2] @ from NEON_00_15 + vadd.i64 @X[$i%8],$s1 +___ + &NEON_00_15(2*$i,@_); +} + +$code.=<<___; +#if __ARM_MAX_ARCH__>=7 +.arch armv7-a +.fpu neon + +.global sha512_block_data_order_neon +.type sha512_block_data_order_neon,%function +.align 4 +sha512_block_data_order_neon: +.LNEON: + dmb @ errata #451034 on early Cortex A8 + add $len,$inp,$len,lsl#7 @ len to point at the end of inp + VFP_ABI_PUSH + adrl $Ktbl,K512 + vldmia $ctx,{$A-$H} @ load context +.Loop_neon: +___ +for($i=0;$i<16;$i++) { &NEON_00_15($i,@V); unshift(@V,pop(@V)); } +$code.=<<___; + mov $cnt,#4 +.L16_79_neon: + subs $cnt,#1 +___ +for(;$i<32;$i++) { &NEON_16_79($i,@V); unshift(@V,pop(@V)); } +$code.=<<___; + bne .L16_79_neon + + vadd.i64 $A,d30 @ h+=Maj from the past + vldmia $ctx,{d24-d31} @ load context to temp + vadd.i64 q8,q12 @ vectorized accumulate + vadd.i64 q9,q13 + vadd.i64 q10,q14 + vadd.i64 q11,q15 + vstmia $ctx,{$A-$H} @ save context + teq $inp,$len + sub $Ktbl,#640 @ rewind K512 + bne .Loop_neon + + VFP_ABI_POP + ret @ bx lr +.size sha512_block_data_order_neon,.-sha512_block_data_order_neon +#endif +___ +} +$code.=<<___; +.asciz "SHA512 block transform for ARMv4/NEON, CRYPTOGAMS by <appro\@openssl.org>" +.align 2 +#if __ARM_MAX_ARCH__>=7 && !defined(__KERNEL__) +.comm OPENSSL_armcap_P,4,4 +#endif +___ + +$code =~ s/\`([^\`]*)\`/eval $1/gem; +$code =~ s/\bbx\s+lr\b/.word\t0xe12fff1e/gm; # make it possible to compile with -march=armv4 +$code =~ s/\bret\b/bx lr/gm; + +open SELF,$0; +while(<SELF>) { + next if (/^#!/); + last if (!s/^#/@/ and !/^$/); + print; +} +close SELF; + +print $code; +close STDOUT; # enforce flush diff --git a/arch/arm/crypto/sha512-armv7-neon.S b/arch/arm/crypto/sha512-armv7-neon.S deleted file mode 100644 index fe99472e5..000000000 --- a/arch/arm/crypto/sha512-armv7-neon.S +++ /dev/null @@ -1,455 +0,0 @@ -/* sha512-armv7-neon.S - ARM/NEON assembly implementation of SHA-512 transform - * - * Copyright © 2013-2014 Jussi Kivilinna <jussi.kivilinna@iki.fi> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the Free - * Software Foundation; either version 2 of the License, or (at your option) - * any later version. - */ - -#include <linux/linkage.h> - - -.syntax unified -.code 32 -.fpu neon - -.text - -/* structure of SHA512_CONTEXT */ -#define hd_a 0 -#define hd_b ((hd_a) + 8) -#define hd_c ((hd_b) + 8) -#define hd_d ((hd_c) + 8) -#define hd_e ((hd_d) + 8) -#define hd_f ((hd_e) + 8) -#define hd_g ((hd_f) + 8) - -/* register macros */ -#define RK %r2 - -#define RA d0 -#define RB d1 -#define RC d2 -#define RD d3 -#define RE d4 -#define RF d5 -#define RG d6 -#define RH d7 - -#define RT0 d8 -#define RT1 d9 -#define RT2 d10 -#define RT3 d11 -#define RT4 d12 -#define RT5 d13 -#define RT6 d14 -#define RT7 d15 - -#define RT01q q4 -#define RT23q q5 -#define RT45q q6 -#define RT67q q7 - -#define RW0 d16 -#define RW1 d17 -#define RW2 d18 -#define RW3 d19 -#define RW4 d20 -#define RW5 d21 -#define RW6 d22 -#define RW7 d23 -#define RW8 d24 -#define RW9 d25 -#define RW10 d26 -#define RW11 d27 -#define RW12 d28 -#define RW13 d29 -#define RW14 d30 -#define RW15 d31 - -#define RW01q q8 -#define RW23q q9 -#define RW45q q10 -#define RW67q q11 -#define RW89q q12 -#define RW1011q q13 -#define RW1213q q14 -#define RW1415q q15 - -/*********************************************************************** - * ARM assembly implementation of sha512 transform - ***********************************************************************/ -#define rounds2_0_63(ra, rb, rc, rd, re, rf, rg, rh, rw0, rw1, rw01q, rw2, \ - rw23q, rw1415q, rw9, rw10, interleave_op, arg1) \ - /* t1 = h + Sum1 (e) + Ch (e, f, g) + k[t] + w[t]; */ \ - vshr.u64 RT2, re, #14; \ - vshl.u64 RT3, re, #64 - 14; \ - interleave_op(arg1); \ - vshr.u64 RT4, re, #18; \ - vshl.u64 RT5, re, #64 - 18; \ - vld1.64 {RT0}, [RK]!; \ - veor.64 RT23q, RT23q, RT45q; \ - vshr.u64 RT4, re, #41; \ - vshl.u64 RT5, re, #64 - 41; \ - vadd.u64 RT0, RT0, rw0; \ - veor.64 RT23q, RT23q, RT45q; \ - vmov.64 RT7, re; \ - veor.64 RT1, RT2, RT3; \ - vbsl.64 RT7, rf, rg; \ - \ - vadd.u64 RT1, RT1, rh; \ - vshr.u64 RT2, ra, #28; \ - vshl.u64 RT3, ra, #64 - 28; \ - vadd.u64 RT1, RT1, RT0; \ - vshr.u64 RT4, ra, #34; \ - vshl.u64 RT5, ra, #64 - 34; \ - vadd.u64 RT1, RT1, RT7; \ - \ - /* h = Sum0 (a) + Maj (a, b, c); */ \ - veor.64 RT23q, RT23q, RT45q; \ - vshr.u64 RT4, ra, #39; \ - vshl.u64 RT5, ra, #64 - 39; \ - veor.64 RT0, ra, rb; \ - veor.64 RT23q, RT23q, RT45q; \ - vbsl.64 RT0, rc, rb; \ - vadd.u64 rd, rd, RT1; /* d+=t1; */ \ - veor.64 rh, RT2, RT3; \ - \ - /* t1 = g + Sum1 (d) + Ch (d, e, f) + k[t] + w[t]; */ \ - vshr.u64 RT2, rd, #14; \ - vshl.u64 RT3, rd, #64 - 14; \ - vadd.u64 rh, rh, RT0; \ - vshr.u64 RT4, rd, #18; \ - vshl.u64 RT5, rd, #64 - 18; \ - vadd.u64 rh, rh, RT1; /* h+=t1; */ \ - vld1.64 {RT0}, [RK]!; \ - veor.64 RT23q, RT23q, RT45q; \ - vshr.u64 RT4, rd, #41; \ - vshl.u64 RT5, rd, #64 - 41; \ - vadd.u64 RT0, RT0, rw1; \ - veor.64 RT23q, RT23q, RT45q; \ - vmov.64 RT7, rd; \ - veor.64 RT1, RT2, RT3; \ - vbsl.64 RT7, re, rf; \ - \ - vadd.u64 RT1, RT1, rg; \ - vshr.u64 RT2, rh, #28; \ - vshl.u64 RT3, rh, #64 - 28; \ - vadd.u64 RT1, RT1, RT0; \ - vshr.u64 RT4, rh, #34; \ - vshl.u64 RT5, rh, #64 - 34; \ - vadd.u64 RT1, RT1, RT7; \ - \ - /* g = Sum0 (h) + Maj (h, a, b); */ \ - veor.64 RT23q, RT23q, RT45q; \ - vshr.u64 RT4, rh, #39; \ - vshl.u64 RT5, rh, #64 - 39; \ - veor.64 RT0, rh, ra; \ - veor.64 RT23q, RT23q, RT45q; \ - vbsl.64 RT0, rb, ra; \ - vadd.u64 rc, rc, RT1; /* c+=t1; */ \ - veor.64 rg, RT2, RT3; \ - \ - /* w[0] += S1 (w[14]) + w[9] + S0 (w[1]); */ \ - /* w[1] += S1 (w[15]) + w[10] + S0 (w[2]); */ \ - \ - /**** S0(w[1:2]) */ \ - \ - /* w[0:1] += w[9:10] */ \ - /* RT23q = rw1:rw2 */ \ - vext.u64 RT23q, rw01q, rw23q, #1; \ - vadd.u64 rw0, rw9; \ - vadd.u64 rg, rg, RT0; \ - vadd.u64 rw1, rw10;\ - vadd.u64 rg, rg, RT1; /* g+=t1; */ \ - \ - vshr.u64 RT45q, RT23q, #1; \ - vshl.u64 RT67q, RT23q, #64 - 1; \ - vshr.u64 RT01q, RT23q, #8; \ - veor.u64 RT45q, RT45q, RT67q; \ - vshl.u64 RT67q, RT23q, #64 - 8; \ - veor.u64 RT45q, RT45q, RT01q; \ - vshr.u64 RT01q, RT23q, #7; \ - veor.u64 RT45q, RT45q, RT67q; \ - \ - /**** S1(w[14:15]) */ \ - vshr.u64 RT23q, rw1415q, #6; \ - veor.u64 RT01q, RT01q, RT45q; \ - vshr.u64 RT45q, rw1415q, #19; \ - vshl.u64 RT67q, rw1415q, #64 - 19; \ - veor.u64 RT23q, RT23q, RT45q; \ - vshr.u64 RT45q, rw1415q, #61; \ - veor.u64 RT23q, RT23q, RT67q; \ - vshl.u64 RT67q, rw1415q, #64 - 61; \ - veor.u64 RT23q, RT23q, RT45q; \ - vadd.u64 rw01q, RT01q; /* w[0:1] += S(w[1:2]) */ \ - veor.u64 RT01q, RT23q, RT67q; -#define vadd_RT01q(rw01q) \ - /* w[0:1] += S(w[14:15]) */ \ - vadd.u64 rw01q, RT01q; - -#define dummy(_) /*_*/ - -#define rounds2_64_79(ra, rb, rc, rd, re, rf, rg, rh, rw0, rw1, \ - interleave_op1, arg1, interleave_op2, arg2) \ - /* t1 = h + Sum1 (e) + Ch (e, f, g) + k[t] + w[t]; */ \ - vshr.u64 RT2, re, #14; \ - vshl.u64 RT3, re, #64 - 14; \ - interleave_op1(arg1); \ - vshr.u64 RT4, re, #18; \ - vshl.u64 RT5, re, #64 - 18; \ - interleave_op2(arg2); \ - vld1.64 {RT0}, [RK]!; \ - veor.64 RT23q, RT23q, RT45q; \ - vshr.u64 RT4, re, #41; \ - vshl.u64 RT5, re, #64 - 41; \ - vadd.u64 RT0, RT0, rw0; \ - veor.64 RT23q, RT23q, RT45q; \ - vmov.64 RT7, re; \ - veor.64 RT1, RT2, RT3; \ - vbsl.64 RT7, rf, rg; \ - \ - vadd.u64 RT1, RT1, rh; \ - vshr.u64 RT2, ra, #28; \ - vshl.u64 RT3, ra, #64 - 28; \ - vadd.u64 RT1, RT1, RT0; \ - vshr.u64 RT4, ra, #34; \ - vshl.u64 RT5, ra, #64 - 34; \ - vadd.u64 RT1, RT1, RT7; \ - \ - /* h = Sum0 (a) + Maj (a, b, c); */ \ - veor.64 RT23q, RT23q, RT45q; \ - vshr.u64 RT4, ra, #39; \ - vshl.u64 RT5, ra, #64 - 39; \ - veor.64 RT0, ra, rb; \ - veor.64 RT23q, RT23q, RT45q; \ - vbsl.64 RT0, rc, rb; \ - vadd.u64 rd, rd, RT1; /* d+=t1; */ \ - veor.64 rh, RT2, RT3; \ - \ - /* t1 = g + Sum1 (d) + Ch (d, e, f) + k[t] + w[t]; */ \ - vshr.u64 RT2, rd, #14; \ - vshl.u64 RT3, rd, #64 - 14; \ - vadd.u64 rh, rh, RT0; \ - vshr.u64 RT4, rd, #18; \ - vshl.u64 RT5, rd, #64 - 18; \ - vadd.u64 rh, rh, RT1; /* h+=t1; */ \ - vld1.64 {RT0}, [RK]!; \ - veor.64 RT23q, RT23q, RT45q; \ - vshr.u64 RT4, rd, #41; \ - vshl.u64 RT5, rd, #64 - 41; \ - vadd.u64 RT0, RT0, rw1; \ - veor.64 RT23q, RT23q, RT45q; \ - vmov.64 RT7, rd; \ - veor.64 RT1, RT2, RT3; \ - vbsl.64 RT7, re, rf; \ - \ - vadd.u64 RT1, RT1, rg; \ - vshr.u64 RT2, rh, #28; \ - vshl.u64 RT3, rh, #64 - 28; \ - vadd.u64 RT1, RT1, RT0; \ - vshr.u64 RT4, rh, #34; \ - vshl.u64 RT5, rh, #64 - 34; \ - vadd.u64 RT1, RT1, RT7; \ - \ - /* g = Sum0 (h) + Maj (h, a, b); */ \ - veor.64 RT23q, RT23q, RT45q; \ - vshr.u64 RT4, rh, #39; \ - vshl.u64 RT5, rh, #64 - 39; \ - veor.64 RT0, rh, ra; \ - veor.64 RT23q, RT23q, RT45q; \ - vbsl.64 RT0, rb, ra; \ - vadd.u64 rc, rc, RT1; /* c+=t1; */ \ - veor.64 rg, RT2, RT3; -#define vadd_rg_RT0(rg) \ - vadd.u64 rg, rg, RT0; -#define vadd_rg_RT1(rg) \ - vadd.u64 rg, rg, RT1; /* g+=t1; */ - -.align 3 -ENTRY(sha512_transform_neon) - /* Input: - * %r0: SHA512_CONTEXT - * %r1: data - * %r2: u64 k[] constants - * %r3: nblks - */ - push {%lr}; - - mov %lr, #0; - - /* Load context to d0-d7 */ - vld1.64 {RA-RD}, [%r0]!; - vld1.64 {RE-RH}, [%r0]; - sub %r0, #(4*8); - - /* Load input to w[16], d16-d31 */ - /* NOTE: Assumes that on ARMv7 unaligned accesses are always allowed. */ - vld1.64 {RW0-RW3}, [%r1]!; - vld1.64 {RW4-RW7}, [%r1]!; - vld1.64 {RW8-RW11}, [%r1]!; - vld1.64 {RW12-RW15}, [%r1]!; -#ifdef __ARMEL__ - /* byteswap */ - vrev64.8 RW01q, RW01q; - vrev64.8 RW23q, RW23q; - vrev64.8 RW45q, RW45q; - vrev64.8 RW67q, RW67q; - vrev64.8 RW89q, RW89q; - vrev64.8 RW1011q, RW1011q; - vrev64.8 RW1213q, RW1213q; - vrev64.8 RW1415q, RW1415q; -#endif - - /* EABI says that d8-d15 must be preserved by callee. */ - /*vpush {RT0-RT7};*/ - -.Loop: - rounds2_0_63(RA, RB, RC, RD, RE, RF, RG, RH, RW0, RW1, RW01q, RW2, - RW23q, RW1415q, RW9, RW10, dummy, _); - b .Lenter_rounds; - -.Loop_rounds: - rounds2_0_63(RA, RB, RC, RD, RE, RF, RG, RH, RW0, RW1, RW01q, RW2, - RW23q, RW1415q, RW9, RW10, vadd_RT01q, RW1415q); -.Lenter_rounds: - rounds2_0_63(RG, RH, RA, RB, RC, RD, RE, RF, RW2, RW3, RW23q, RW4, - RW45q, RW01q, RW11, RW12, vadd_RT01q, RW01q); - rounds2_0_63(RE, RF, RG, RH, RA, RB, RC, RD, RW4, RW5, RW45q, RW6, - RW67q, RW23q, RW13, RW14, vadd_RT01q, RW23q); - rounds2_0_63(RC, RD, RE, RF, RG, RH, RA, RB, RW6, RW7, RW67q, RW8, - RW89q, RW45q, RW15, RW0, vadd_RT01q, RW45q); - rounds2_0_63(RA, RB, RC, RD, RE, RF, RG, RH, RW8, RW9, RW89q, RW10, - RW1011q, RW67q, RW1, RW2, vadd_RT01q, RW67q); - rounds2_0_63(RG, RH, RA, RB, RC, RD, RE, RF, RW10, RW11, RW1011q, RW12, - RW1213q, RW89q, RW3, RW4, vadd_RT01q, RW89q); - add %lr, #16; - rounds2_0_63(RE, RF, RG, RH, RA, RB, RC, RD, RW12, RW13, RW1213q, RW14, - RW1415q, RW1011q, RW5, RW6, vadd_RT01q, RW1011q); - cmp %lr, #64; - rounds2_0_63(RC, RD, RE, RF, RG, RH, RA, RB, RW14, RW15, RW1415q, RW0, - RW01q, RW1213q, RW7, RW8, vadd_RT01q, RW1213q); - bne .Loop_rounds; - - subs %r3, #1; - - rounds2_64_79(RA, RB, RC, RD, RE, RF, RG, RH, RW0, RW1, - vadd_RT01q, RW1415q, dummy, _); - rounds2_64_79(RG, RH, RA, RB, RC, RD, RE, RF, RW2, RW3, - vadd_rg_RT0, RG, vadd_rg_RT1, RG); - beq .Lhandle_tail; - vld1.64 {RW0-RW3}, [%r1]!; - rounds2_64_79(RE, RF, RG, RH, RA, RB, RC, RD, RW4, RW5, - vadd_rg_RT0, RE, vadd_rg_RT1, RE); - rounds2_64_79(RC, RD, RE, RF, RG, RH, RA, RB, RW6, RW7, - vadd_rg_RT0, RC, vadd_rg_RT1, RC); -#ifdef __ARMEL__ - vrev64.8 RW01q, RW01q; - vrev64.8 RW23q, RW23q; -#endif - vld1.64 {RW4-RW7}, [%r1]!; - rounds2_64_79(RA, RB, RC, RD, RE, RF, RG, RH, RW8, RW9, - vadd_rg_RT0, RA, vadd_rg_RT1, RA); - rounds2_64_79(RG, RH, RA, RB, RC, RD, RE, RF, RW10, RW11, - vadd_rg_RT0, RG, vadd_rg_RT1, RG); -#ifdef __ARMEL__ - vrev64.8 RW45q, RW45q; - vrev64.8 RW67q, RW67q; -#endif - vld1.64 {RW8-RW11}, [%r1]!; - rounds2_64_79(RE, RF, RG, RH, RA, RB, RC, RD, RW12, RW13, - vadd_rg_RT0, RE, vadd_rg_RT1, RE); - rounds2_64_79(RC, RD, RE, RF, RG, RH, RA, RB, RW14, RW15, - vadd_rg_RT0, RC, vadd_rg_RT1, RC); -#ifdef __ARMEL__ - vrev64.8 RW89q, RW89q; - vrev64.8 RW1011q, RW1011q; -#endif - vld1.64 {RW12-RW15}, [%r1]!; - vadd_rg_RT0(RA); - vadd_rg_RT1(RA); - - /* Load context */ - vld1.64 {RT0-RT3}, [%r0]!; - vld1.64 {RT4-RT7}, [%r0]; - sub %r0, #(4*8); - -#ifdef __ARMEL__ - vrev64.8 RW1213q, RW1213q; - vrev64.8 RW1415q, RW1415q; -#endif - - vadd.u64 RA, RT0; - vadd.u64 RB, RT1; - vadd.u64 RC, RT2; - vadd.u64 RD, RT3; - vadd.u64 RE, RT4; - vadd.u64 RF, RT5; - vadd.u64 RG, RT6; - vadd.u64 RH, RT7; - - /* Store the first half of context */ - vst1.64 {RA-RD}, [%r0]!; - sub RK, $(8*80); - vst1.64 {RE-RH}, [%r0]; /* Store the last half of context */ - mov %lr, #0; - sub %r0, #(4*8); - - b .Loop; - -.Lhandle_tail: - rounds2_64_79(RE, RF, RG, RH, RA, RB, RC, RD, RW4, RW5, - vadd_rg_RT0, RE, vadd_rg_RT1, RE); - rounds2_64_79(RC, RD, RE, RF, RG, RH, RA, RB, RW6, RW7, - vadd_rg_RT0, RC, vadd_rg_RT1, RC); - rounds2_64_79(RA, RB, RC, RD, RE, RF, RG, RH, RW8, RW9, - vadd_rg_RT0, RA, vadd_rg_RT1, RA); - rounds2_64_79(RG, RH, RA, RB, RC, RD, RE, RF, RW10, RW11, - vadd_rg_RT0, RG, vadd_rg_RT1, RG); - rounds2_64_79(RE, RF, RG, RH, RA, RB, RC, RD, RW12, RW13, - vadd_rg_RT0, RE, vadd_rg_RT1, RE); - rounds2_64_79(RC, RD, RE, RF, RG, RH, RA, RB, RW14, RW15, - vadd_rg_RT0, RC, vadd_rg_RT1, RC); - - /* Load context to d16-d23 */ - vld1.64 {RW0-RW3}, [%r0]!; - vadd_rg_RT0(RA); - vld1.64 {RW4-RW7}, [%r0]; - vadd_rg_RT1(RA); - sub %r0, #(4*8); - - vadd.u64 RA, RW0; - vadd.u64 RB, RW1; - vadd.u64 RC, RW2; - vadd.u64 RD, RW3; - vadd.u64 RE, RW4; - vadd.u64 RF, RW5; - vadd.u64 RG, RW6; - vadd.u64 RH, RW7; - - /* Store the first half of context */ - vst1.64 {RA-RD}, [%r0]!; - - /* Clear used registers */ - /* d16-d31 */ - veor.u64 RW01q, RW01q; - veor.u64 RW23q, RW23q; - veor.u64 RW45q, RW45q; - veor.u64 RW67q, RW67q; - vst1.64 {RE-RH}, [%r0]; /* Store the last half of context */ - veor.u64 RW89q, RW89q; - veor.u64 RW1011q, RW1011q; - veor.u64 RW1213q, RW1213q; - veor.u64 RW1415q, RW1415q; - /* d8-d15 */ - /*vpop {RT0-RT7};*/ - /* d0-d7 (q0-q3) */ - veor.u64 %q0, %q0; - veor.u64 %q1, %q1; - veor.u64 %q2, %q2; - veor.u64 %q3, %q3; - - pop {%pc}; -ENDPROC(sha512_transform_neon) diff --git a/arch/arm/crypto/sha512-core.S_shipped b/arch/arm/crypto/sha512-core.S_shipped new file mode 100644 index 000000000..3694c4d4c --- /dev/null +++ b/arch/arm/crypto/sha512-core.S_shipped @@ -0,0 +1,1861 @@ + +@ ==================================================================== +@ Written by Andy Polyakov <appro@openssl.org> for the OpenSSL +@ project. The module is, however, dual licensed under OpenSSL and +@ CRYPTOGAMS licenses depending on where you obtain it. For further +@ details see http://www.openssl.org/~appro/cryptogams/. +@ +@ Permission to use under GPL terms is granted. +@ ==================================================================== + +@ SHA512 block procedure for ARMv4. September 2007. + +@ This code is ~4.5 (four and a half) times faster than code generated +@ by gcc 3.4 and it spends ~72 clock cycles per byte [on single-issue +@ Xscale PXA250 core]. +@ +@ July 2010. +@ +@ Rescheduling for dual-issue pipeline resulted in 6% improvement on +@ Cortex A8 core and ~40 cycles per processed byte. + +@ February 2011. +@ +@ Profiler-assisted and platform-specific optimization resulted in 7% +@ improvement on Coxtex A8 core and ~38 cycles per byte. + +@ March 2011. +@ +@ Add NEON implementation. On Cortex A8 it was measured to process +@ one byte in 23.3 cycles or ~60% faster than integer-only code. + +@ August 2012. +@ +@ Improve NEON performance by 12% on Snapdragon S4. In absolute +@ terms it's 22.6 cycles per byte, which is disappointing result. +@ Technical writers asserted that 3-way S4 pipeline can sustain +@ multiple NEON instructions per cycle, but dual NEON issue could +@ not be observed, see http://www.openssl.org/~appro/Snapdragon-S4.html +@ for further details. On side note Cortex-A15 processes one byte in +@ 16 cycles. + +@ Byte order [in]dependence. ========================================= +@ +@ Originally caller was expected to maintain specific *dword* order in +@ h[0-7], namely with most significant dword at *lower* address, which +@ was reflected in below two parameters as 0 and 4. Now caller is +@ expected to maintain native byte order for whole 64-bit values. +#ifndef __KERNEL__ +# include "arm_arch.h" +# define VFP_ABI_PUSH vstmdb sp!,{d8-d15} +# define VFP_ABI_POP vldmia sp!,{d8-d15} +#else +# define __ARM_ARCH__ __LINUX_ARM_ARCH__ +# define __ARM_MAX_ARCH__ 7 +# define VFP_ABI_PUSH +# define VFP_ABI_POP +#endif + +#ifdef __ARMEL__ +# define LO 0 +# define HI 4 +# define WORD64(hi0,lo0,hi1,lo1) .word lo0,hi0, lo1,hi1 +#else +# define HI 0 +# define LO 4 +# define WORD64(hi0,lo0,hi1,lo1) .word hi0,lo0, hi1,lo1 +#endif + +.text +#if __ARM_ARCH__<7 +.code 32 +#else +.syntax unified +# ifdef __thumb2__ +# define adrl adr +.thumb +# else +.code 32 +# endif +#endif + +.type K512,%object +.align 5 +K512: +WORD64(0x428a2f98,0xd728ae22, 0x71374491,0x23ef65cd) +WORD64(0xb5c0fbcf,0xec4d3b2f, 0xe9b5dba5,0x8189dbbc) +WORD64(0x3956c25b,0xf348b538, 0x59f111f1,0xb605d019) +WORD64(0x923f82a4,0xaf194f9b, 0xab1c5ed5,0xda6d8118) +WORD64(0xd807aa98,0xa3030242, 0x12835b01,0x45706fbe) +WORD64(0x243185be,0x4ee4b28c, 0x550c7dc3,0xd5ffb4e2) +WORD64(0x72be5d74,0xf27b896f, 0x80deb1fe,0x3b1696b1) +WORD64(0x9bdc06a7,0x25c71235, 0xc19bf174,0xcf692694) +WORD64(0xe49b69c1,0x9ef14ad2, 0xefbe4786,0x384f25e3) +WORD64(0x0fc19dc6,0x8b8cd5b5, 0x240ca1cc,0x77ac9c65) +WORD64(0x2de92c6f,0x592b0275, 0x4a7484aa,0x6ea6e483) +WORD64(0x5cb0a9dc,0xbd41fbd4, 0x76f988da,0x831153b5) +WORD64(0x983e5152,0xee66dfab, 0xa831c66d,0x2db43210) +WORD64(0xb00327c8,0x98fb213f, 0xbf597fc7,0xbeef0ee4) +WORD64(0xc6e00bf3,0x3da88fc2, 0xd5a79147,0x930aa725) +WORD64(0x06ca6351,0xe003826f, 0x14292967,0x0a0e6e70) +WORD64(0x27b70a85,0x46d22ffc, 0x2e1b2138,0x5c26c926) +WORD64(0x4d2c6dfc,0x5ac42aed, 0x53380d13,0x9d95b3df) +WORD64(0x650a7354,0x8baf63de, 0x766a0abb,0x3c77b2a8) +WORD64(0x81c2c92e,0x47edaee6, 0x92722c85,0x1482353b) +WORD64(0xa2bfe8a1,0x4cf10364, 0xa81a664b,0xbc423001) +WORD64(0xc24b8b70,0xd0f89791, 0xc76c51a3,0x0654be30) +WORD64(0xd192e819,0xd6ef5218, 0xd6990624,0x5565a910) +WORD64(0xf40e3585,0x5771202a, 0x106aa070,0x32bbd1b8) +WORD64(0x19a4c116,0xb8d2d0c8, 0x1e376c08,0x5141ab53) +WORD64(0x2748774c,0xdf8eeb99, 0x34b0bcb5,0xe19b48a8) +WORD64(0x391c0cb3,0xc5c95a63, 0x4ed8aa4a,0xe3418acb) +WORD64(0x5b9cca4f,0x7763e373, 0x682e6ff3,0xd6b2b8a3) +WORD64(0x748f82ee,0x5defb2fc, 0x78a5636f,0x43172f60) +WORD64(0x84c87814,0xa1f0ab72, 0x8cc70208,0x1a6439ec) +WORD64(0x90befffa,0x23631e28, 0xa4506ceb,0xde82bde9) +WORD64(0xbef9a3f7,0xb2c67915, 0xc67178f2,0xe372532b) +WORD64(0xca273ece,0xea26619c, 0xd186b8c7,0x21c0c207) +WORD64(0xeada7dd6,0xcde0eb1e, 0xf57d4f7f,0xee6ed178) +WORD64(0x06f067aa,0x72176fba, 0x0a637dc5,0xa2c898a6) +WORD64(0x113f9804,0xbef90dae, 0x1b710b35,0x131c471b) +WORD64(0x28db77f5,0x23047d84, 0x32caab7b,0x40c72493) +WORD64(0x3c9ebe0a,0x15c9bebc, 0x431d67c4,0x9c100d4c) +WORD64(0x4cc5d4be,0xcb3e42b6, 0x597f299c,0xfc657e2a) +WORD64(0x5fcb6fab,0x3ad6faec, 0x6c44198c,0x4a475817) +.size K512,.-K512 +#if __ARM_MAX_ARCH__>=7 && !defined(__KERNEL__) +.LOPENSSL_armcap: +.word OPENSSL_armcap_P-sha512_block_data_order +.skip 32-4 +#else +.skip 32 +#endif + +.global sha512_block_data_order +.type sha512_block_data_order,%function +sha512_block_data_order: +#if __ARM_ARCH__<7 + sub r3,pc,#8 @ sha512_block_data_order +#else + adr r3,sha512_block_data_order +#endif +#if __ARM_MAX_ARCH__>=7 && !defined(__KERNEL__) + ldr r12,.LOPENSSL_armcap + ldr r12,[r3,r12] @ OPENSSL_armcap_P + tst r12,#1 + bne .LNEON +#endif + add r2,r1,r2,lsl#7 @ len to point at the end of inp + stmdb sp!,{r4-r12,lr} + sub r14,r3,#672 @ K512 + sub sp,sp,#9*8 + + ldr r7,[r0,#32+LO] + ldr r8,[r0,#32+HI] + ldr r9, [r0,#48+LO] + ldr r10, [r0,#48+HI] + ldr r11, [r0,#56+LO] + ldr r12, [r0,#56+HI] +.Loop: + str r9, [sp,#48+0] + str r10, [sp,#48+4] + str r11, [sp,#56+0] + str r12, [sp,#56+4] + ldr r5,[r0,#0+LO] + ldr r6,[r0,#0+HI] + ldr r3,[r0,#8+LO] + ldr r4,[r0,#8+HI] + ldr r9, [r0,#16+LO] + ldr r10, [r0,#16+HI] + ldr r11, [r0,#24+LO] + ldr r12, [r0,#24+HI] + str r3,[sp,#8+0] + str r4,[sp,#8+4] + str r9, [sp,#16+0] + str r10, [sp,#16+4] + str r11, [sp,#24+0] + str r12, [sp,#24+4] + ldr r3,[r0,#40+LO] + ldr r4,[r0,#40+HI] + str r3,[sp,#40+0] + str r4,[sp,#40+4] + +.L00_15: +#if __ARM_ARCH__<7 + ldrb r3,[r1,#7] + ldrb r9, [r1,#6] + ldrb r10, [r1,#5] + ldrb r11, [r1,#4] + ldrb r4,[r1,#3] + ldrb r12, [r1,#2] + orr r3,r3,r9,lsl#8 + ldrb r9, [r1,#1] + orr r3,r3,r10,lsl#16 + ldrb r10, [r1],#8 + orr r3,r3,r11,lsl#24 + orr r4,r4,r12,lsl#8 + orr r4,r4,r9,lsl#16 + orr r4,r4,r10,lsl#24 +#else + ldr r3,[r1,#4] + ldr r4,[r1],#8 +#ifdef __ARMEL__ + rev r3,r3 + rev r4,r4 +#endif +#endif + @ Sigma1(x) (ROTR((x),14) ^ ROTR((x),18) ^ ROTR((x),41)) + @ LO lo>>14^hi<<18 ^ lo>>18^hi<<14 ^ hi>>9^lo<<23 + @ HI hi>>14^lo<<18 ^ hi>>18^lo<<14 ^ lo>>9^hi<<23 + mov r9,r7,lsr#14 + str r3,[sp,#64+0] + mov r10,r8,lsr#14 + str r4,[sp,#64+4] + eor r9,r9,r8,lsl#18 + ldr r11,[sp,#56+0] @ h.lo + eor r10,r10,r7,lsl#18 + ldr r12,[sp,#56+4] @ h.hi + eor r9,r9,r7,lsr#18 + eor r10,r10,r8,lsr#18 + eor r9,r9,r8,lsl#14 + eor r10,r10,r7,lsl#14 + eor r9,r9,r8,lsr#9 + eor r10,r10,r7,lsr#9 + eor r9,r9,r7,lsl#23 + eor r10,r10,r8,lsl#23 @ Sigma1(e) + adds r3,r3,r9 + ldr r9,[sp,#40+0] @ f.lo + adc r4,r4,r10 @ T += Sigma1(e) + ldr r10,[sp,#40+4] @ f.hi + adds r3,r3,r11 + ldr r11,[sp,#48+0] @ g.lo + adc r4,r4,r12 @ T += h + ldr r12,[sp,#48+4] @ g.hi + + eor r9,r9,r11 + str r7,[sp,#32+0] + eor r10,r10,r12 + str r8,[sp,#32+4] + and r9,r9,r7 + str r5,[sp,#0+0] + and r10,r10,r8 + str r6,[sp,#0+4] + eor r9,r9,r11 + ldr r11,[r14,#LO] @ K[i].lo + eor r10,r10,r12 @ Ch(e,f,g) + ldr r12,[r14,#HI] @ K[i].hi + + adds r3,r3,r9 + ldr r7,[sp,#24+0] @ d.lo + adc r4,r4,r10 @ T += Ch(e,f,g) + ldr r8,[sp,#24+4] @ d.hi + adds r3,r3,r11 + and r9,r11,#0xff + adc r4,r4,r12 @ T += K[i] + adds r7,r7,r3 + ldr r11,[sp,#8+0] @ b.lo + adc r8,r8,r4 @ d += T + teq r9,#148 + + ldr r12,[sp,#16+0] @ c.lo +#if __ARM_ARCH__>=7 + it eq @ Thumb2 thing, sanity check in ARM +#endif + orreq r14,r14,#1 + @ Sigma0(x) (ROTR((x),28) ^ ROTR((x),34) ^ ROTR((x),39)) + @ LO lo>>28^hi<<4 ^ hi>>2^lo<<30 ^ hi>>7^lo<<25 + @ HI hi>>28^lo<<4 ^ lo>>2^hi<<30 ^ lo>>7^hi<<25 + mov r9,r5,lsr#28 + mov r10,r6,lsr#28 + eor r9,r9,r6,lsl#4 + eor r10,r10,r5,lsl#4 + eor r9,r9,r6,lsr#2 + eor r10,r10,r5,lsr#2 + eor r9,r9,r5,lsl#30 + eor r10,r10,r6,lsl#30 + eor r9,r9,r6,lsr#7 + eor r10,r10,r5,lsr#7 + eor r9,r9,r5,lsl#25 + eor r10,r10,r6,lsl#25 @ Sigma0(a) + adds r3,r3,r9 + and r9,r5,r11 + adc r4,r4,r10 @ T += Sigma0(a) + + ldr r10,[sp,#8+4] @ b.hi + orr r5,r5,r11 + ldr r11,[sp,#16+4] @ c.hi + and r5,r5,r12 + and r12,r6,r10 + orr r6,r6,r10 + orr r5,r5,r9 @ Maj(a,b,c).lo + and r6,r6,r11 + adds r5,r5,r3 + orr r6,r6,r12 @ Maj(a,b,c).hi + sub sp,sp,#8 + adc r6,r6,r4 @ h += T + tst r14,#1 + add r14,r14,#8 + tst r14,#1 + beq .L00_15 + ldr r9,[sp,#184+0] + ldr r10,[sp,#184+4] + bic r14,r14,#1 +.L16_79: + @ sigma0(x) (ROTR((x),1) ^ ROTR((x),8) ^ ((x)>>7)) + @ LO lo>>1^hi<<31 ^ lo>>8^hi<<24 ^ lo>>7^hi<<25 + @ HI hi>>1^lo<<31 ^ hi>>8^lo<<24 ^ hi>>7 + mov r3,r9,lsr#1 + ldr r11,[sp,#80+0] + mov r4,r10,lsr#1 + ldr r12,[sp,#80+4] + eor r3,r3,r10,lsl#31 + eor r4,r4,r9,lsl#31 + eor r3,r3,r9,lsr#8 + eor r4,r4,r10,lsr#8 + eor r3,r3,r10,lsl#24 + eor r4,r4,r9,lsl#24 + eor r3,r3,r9,lsr#7 + eor r4,r4,r10,lsr#7 + eor r3,r3,r10,lsl#25 + + @ sigma1(x) (ROTR((x),19) ^ ROTR((x),61) ^ ((x)>>6)) + @ LO lo>>19^hi<<13 ^ hi>>29^lo<<3 ^ lo>>6^hi<<26 + @ HI hi>>19^lo<<13 ^ lo>>29^hi<<3 ^ hi>>6 + mov r9,r11,lsr#19 + mov r10,r12,lsr#19 + eor r9,r9,r12,lsl#13 + eor r10,r10,r11,lsl#13 + eor r9,r9,r12,lsr#29 + eor r10,r10,r11,lsr#29 + eor r9,r9,r11,lsl#3 + eor r10,r10,r12,lsl#3 + eor r9,r9,r11,lsr#6 + eor r10,r10,r12,lsr#6 + ldr r11,[sp,#120+0] + eor r9,r9,r12,lsl#26 + + ldr r12,[sp,#120+4] + adds r3,r3,r9 + ldr r9,[sp,#192+0] + adc r4,r4,r10 + + ldr r10,[sp,#192+4] + adds r3,r3,r11 + adc r4,r4,r12 + adds r3,r3,r9 + adc r4,r4,r10 + @ Sigma1(x) (ROTR((x),14) ^ ROTR((x),18) ^ ROTR((x),41)) + @ LO lo>>14^hi<<18 ^ lo>>18^hi<<14 ^ hi>>9^lo<<23 + @ HI hi>>14^lo<<18 ^ hi>>18^lo<<14 ^ lo>>9^hi<<23 + mov r9,r7,lsr#14 + str r3,[sp,#64+0] + mov r10,r8,lsr#14 + str r4,[sp,#64+4] + eor r9,r9,r8,lsl#18 + ldr r11,[sp,#56+0] @ h.lo + eor r10,r10,r7,lsl#18 + ldr r12,[sp,#56+4] @ h.hi + eor r9,r9,r7,lsr#18 + eor r10,r10,r8,lsr#18 + eor r9,r9,r8,lsl#14 + eor r10,r10,r7,lsl#14 + eor r9,r9,r8,lsr#9 + eor r10,r10,r7,lsr#9 + eor r9,r9,r7,lsl#23 + eor r10,r10,r8,lsl#23 @ Sigma1(e) + adds r3,r3,r9 + ldr r9,[sp,#40+0] @ f.lo + adc r4,r4,r10 @ T += Sigma1(e) + ldr r10,[sp,#40+4] @ f.hi + adds r3,r3,r11 + ldr r11,[sp,#48+0] @ g.lo + adc r4,r4,r12 @ T += h + ldr r12,[sp,#48+4] @ g.hi + + eor r9,r9,r11 + str r7,[sp,#32+0] + eor r10,r10,r12 + str r8,[sp,#32+4] + and r9,r9,r7 + str r5,[sp,#0+0] + and r10,r10,r8 + str r6,[sp,#0+4] + eor r9,r9,r11 + ldr r11,[r14,#LO] @ K[i].lo + eor r10,r10,r12 @ Ch(e,f,g) + ldr r12,[r14,#HI] @ K[i].hi + + adds r3,r3,r9 + ldr r7,[sp,#24+0] @ d.lo + adc r4,r4,r10 @ T += Ch(e,f,g) + ldr r8,[sp,#24+4] @ d.hi + adds r3,r3,r11 + and r9,r11,#0xff + adc r4,r4,r12 @ T += K[i] + adds r7,r7,r3 + ldr r11,[sp,#8+0] @ b.lo + adc r8,r8,r4 @ d += T + teq r9,#23 + + ldr r12,[sp,#16+0] @ c.lo +#if __ARM_ARCH__>=7 + it eq @ Thumb2 thing, sanity check in ARM +#endif + orreq r14,r14,#1 + @ Sigma0(x) (ROTR((x),28) ^ ROTR((x),34) ^ ROTR((x),39)) + @ LO lo>>28^hi<<4 ^ hi>>2^lo<<30 ^ hi>>7^lo<<25 + @ HI hi>>28^lo<<4 ^ lo>>2^hi<<30 ^ lo>>7^hi<<25 + mov r9,r5,lsr#28 + mov r10,r6,lsr#28 + eor r9,r9,r6,lsl#4 + eor r10,r10,r5,lsl#4 + eor r9,r9,r6,lsr#2 + eor r10,r10,r5,lsr#2 + eor r9,r9,r5,lsl#30 + eor r10,r10,r6,lsl#30 + eor r9,r9,r6,lsr#7 + eor r10,r10,r5,lsr#7 + eor r9,r9,r5,lsl#25 + eor r10,r10,r6,lsl#25 @ Sigma0(a) + adds r3,r3,r9 + and r9,r5,r11 + adc r4,r4,r10 @ T += Sigma0(a) + + ldr r10,[sp,#8+4] @ b.hi + orr r5,r5,r11 + ldr r11,[sp,#16+4] @ c.hi + and r5,r5,r12 + and r12,r6,r10 + orr r6,r6,r10 + orr r5,r5,r9 @ Maj(a,b,c).lo + and r6,r6,r11 + adds r5,r5,r3 + orr r6,r6,r12 @ Maj(a,b,c).hi + sub sp,sp,#8 + adc r6,r6,r4 @ h += T + tst r14,#1 + add r14,r14,#8 +#if __ARM_ARCH__>=7 + ittt eq @ Thumb2 thing, sanity check in ARM +#endif + ldreq r9,[sp,#184+0] + ldreq r10,[sp,#184+4] + beq .L16_79 + bic r14,r14,#1 + + ldr r3,[sp,#8+0] + ldr r4,[sp,#8+4] + ldr r9, [r0,#0+LO] + ldr r10, [r0,#0+HI] + ldr r11, [r0,#8+LO] + ldr r12, [r0,#8+HI] + adds r9,r5,r9 + str r9, [r0,#0+LO] + adc r10,r6,r10 + str r10, [r0,#0+HI] + adds r11,r3,r11 + str r11, [r0,#8+LO] + adc r12,r4,r12 + str r12, [r0,#8+HI] + + ldr r5,[sp,#16+0] + ldr r6,[sp,#16+4] + ldr r3,[sp,#24+0] + ldr r4,[sp,#24+4] + ldr r9, [r0,#16+LO] + ldr r10, [r0,#16+HI] + ldr r11, [r0,#24+LO] + ldr r12, [r0,#24+HI] + adds r9,r5,r9 + str r9, [r0,#16+LO] + adc r10,r6,r10 + str r10, [r0,#16+HI] + adds r11,r3,r11 + str r11, [r0,#24+LO] + adc r12,r4,r12 + str r12, [r0,#24+HI] + + ldr r3,[sp,#40+0] + ldr r4,[sp,#40+4] + ldr r9, [r0,#32+LO] + ldr r10, [r0,#32+HI] + ldr r11, [r0,#40+LO] + ldr r12, [r0,#40+HI] + adds r7,r7,r9 + str r7,[r0,#32+LO] + adc r8,r8,r10 + str r8,[r0,#32+HI] + adds r11,r3,r11 + str r11, [r0,#40+LO] + adc r12,r4,r12 + str r12, [r0,#40+HI] + + ldr r5,[sp,#48+0] + ldr r6,[sp,#48+4] + ldr r3,[sp,#56+0] + ldr r4,[sp,#56+4] + ldr r9, [r0,#48+LO] + ldr r10, [r0,#48+HI] + ldr r11, [r0,#56+LO] + ldr r12, [r0,#56+HI] + adds r9,r5,r9 + str r9, [r0,#48+LO] + adc r10,r6,r10 + str r10, [r0,#48+HI] + adds r11,r3,r11 + str r11, [r0,#56+LO] + adc r12,r4,r12 + str r12, [r0,#56+HI] + + add sp,sp,#640 + sub r14,r14,#640 + + teq r1,r2 + bne .Loop + + add sp,sp,#8*9 @ destroy frame +#if __ARM_ARCH__>=5 + ldmia sp!,{r4-r12,pc} +#else + ldmia sp!,{r4-r12,lr} + tst lr,#1 + moveq pc,lr @ be binary compatible with V4, yet + .word 0xe12fff1e @ interoperable with Thumb ISA:-) +#endif +.size sha512_block_data_order,.-sha512_block_data_order +#if __ARM_MAX_ARCH__>=7 +.arch armv7-a +.fpu neon + +.global sha512_block_data_order_neon +.type sha512_block_data_order_neon,%function +.align 4 +sha512_block_data_order_neon: +.LNEON: + dmb @ errata #451034 on early Cortex A8 + add r2,r1,r2,lsl#7 @ len to point at the end of inp + VFP_ABI_PUSH + adrl r3,K512 + vldmia r0,{d16-d23} @ load context +.Loop_neon: + vshr.u64 d24,d20,#14 @ 0 +#if 0<16 + vld1.64 {d0},[r1]! @ handles unaligned +#endif + vshr.u64 d25,d20,#18 +#if 0>0 + vadd.i64 d16,d30 @ h+=Maj from the past +#endif + vshr.u64 d26,d20,#41 + vld1.64 {d28},[r3,:64]! @ K[i++] + vsli.64 d24,d20,#50 + vsli.64 d25,d20,#46 + vmov d29,d20 + vsli.64 d26,d20,#23 +#if 0<16 && defined(__ARMEL__) + vrev64.8 d0,d0 +#endif + veor d25,d24 + vbsl d29,d21,d22 @ Ch(e,f,g) + vshr.u64 d24,d16,#28 + veor d26,d25 @ Sigma1(e) + vadd.i64 d27,d29,d23 + vshr.u64 d25,d16,#34 + vsli.64 d24,d16,#36 + vadd.i64 d27,d26 + vshr.u64 d26,d16,#39 + vadd.i64 d28,d0 + vsli.64 d25,d16,#30 + veor d30,d16,d17 + vsli.64 d26,d16,#25 + veor d23,d24,d25 + vadd.i64 d27,d28 + vbsl d30,d18,d17 @ Maj(a,b,c) + veor d23,d26 @ Sigma0(a) + vadd.i64 d19,d27 + vadd.i64 d30,d27 + @ vadd.i64 d23,d30 + vshr.u64 d24,d19,#14 @ 1 +#if 1<16 + vld1.64 {d1},[r1]! @ handles unaligned +#endif + vshr.u64 d25,d19,#18 +#if 1>0 + vadd.i64 d23,d30 @ h+=Maj from the past +#endif + vshr.u64 d26,d19,#41 + vld1.64 {d28},[r3,:64]! @ K[i++] + vsli.64 d24,d19,#50 + vsli.64 d25,d19,#46 + vmov d29,d19 + vsli.64 d26,d19,#23 +#if 1<16 && defined(__ARMEL__) + vrev64.8 d1,d1 +#endif + veor d25,d24 + vbsl d29,d20,d21 @ Ch(e,f,g) + vshr.u64 d24,d23,#28 + veor d26,d25 @ Sigma1(e) + vadd.i64 d27,d29,d22 + vshr.u64 d25,d23,#34 + vsli.64 d24,d23,#36 + vadd.i64 d27,d26 + vshr.u64 d26,d23,#39 + vadd.i64 d28,d1 + vsli.64 d25,d23,#30 + veor d30,d23,d16 + vsli.64 d26,d23,#25 + veor d22,d24,d25 + vadd.i64 d27,d28 + vbsl d30,d17,d16 @ Maj(a,b,c) + veor d22,d26 @ Sigma0(a) + vadd.i64 d18,d27 + vadd.i64 d30,d27 + @ vadd.i64 d22,d30 + vshr.u64 d24,d18,#14 @ 2 +#if 2<16 + vld1.64 {d2},[r1]! @ handles unaligned +#endif + vshr.u64 d25,d18,#18 +#if 2>0 + vadd.i64 d22,d30 @ h+=Maj from the past +#endif + vshr.u64 d26,d18,#41 + vld1.64 {d28},[r3,:64]! @ K[i++] + vsli.64 d24,d18,#50 + vsli.64 d25,d18,#46 + vmov d29,d18 + vsli.64 d26,d18,#23 +#if 2<16 && defined(__ARMEL__) + vrev64.8 d2,d2 +#endif + veor d25,d24 + vbsl d29,d19,d20 @ Ch(e,f,g) + vshr.u64 d24,d22,#28 + veor d26,d25 @ Sigma1(e) + vadd.i64 d27,d29,d21 + vshr.u64 d25,d22,#34 + vsli.64 d24,d22,#36 + vadd.i64 d27,d26 + vshr.u64 d26,d22,#39 + vadd.i64 d28,d2 + vsli.64 d25,d22,#30 + veor d30,d22,d23 + vsli.64 d26,d22,#25 + veor d21,d24,d25 + vadd.i64 d27,d28 + vbsl d30,d16,d23 @ Maj(a,b,c) + veor d21,d26 @ Sigma0(a) + vadd.i64 d17,d27 + vadd.i64 d30,d27 + @ vadd.i64 d21,d30 + vshr.u64 d24,d17,#14 @ 3 +#if 3<16 + vld1.64 {d3},[r1]! @ handles unaligned +#endif + vshr.u64 d25,d17,#18 +#if 3>0 + vadd.i64 d21,d30 @ h+=Maj from the past +#endif + vshr.u64 d26,d17,#41 + vld1.64 {d28},[r3,:64]! @ K[i++] + vsli.64 d24,d17,#50 + vsli.64 d25,d17,#46 + vmov d29,d17 + vsli.64 d26,d17,#23 +#if 3<16 && defined(__ARMEL__) + vrev64.8 d3,d3 +#endif + veor d25,d24 + vbsl d29,d18,d19 @ Ch(e,f,g) + vshr.u64 d24,d21,#28 + veor d26,d25 @ Sigma1(e) + vadd.i64 d27,d29,d20 + vshr.u64 d25,d21,#34 + vsli.64 d24,d21,#36 + vadd.i64 d27,d26 + vshr.u64 d26,d21,#39 + vadd.i64 d28,d3 + vsli.64 d25,d21,#30 + veor d30,d21,d22 + vsli.64 d26,d21,#25 + veor d20,d24,d25 + vadd.i64 d27,d28 + vbsl d30,d23,d22 @ Maj(a,b,c) + veor d20,d26 @ Sigma0(a) + vadd.i64 d16,d27 + vadd.i64 d30,d27 + @ vadd.i64 d20,d30 + vshr.u64 d24,d16,#14 @ 4 +#if 4<16 + vld1.64 {d4},[r1]! @ handles unaligned +#endif + vshr.u64 d25,d16,#18 +#if 4>0 + vadd.i64 d20,d30 @ h+=Maj from the past +#endif + vshr.u64 d26,d16,#41 + vld1.64 {d28},[r3,:64]! @ K[i++] + vsli.64 d24,d16,#50 + vsli.64 d25,d16,#46 + vmov d29,d16 + vsli.64 d26,d16,#23 +#if 4<16 && defined(__ARMEL__) + vrev64.8 d4,d4 +#endif + veor d25,d24 + vbsl d29,d17,d18 @ Ch(e,f,g) + vshr.u64 d24,d20,#28 + veor d26,d25 @ Sigma1(e) + vadd.i64 d27,d29,d19 + vshr.u64 d25,d20,#34 + vsli.64 d24,d20,#36 + vadd.i64 d27,d26 + vshr.u64 d26,d20,#39 + vadd.i64 d28,d4 + vsli.64 d25,d20,#30 + veor d30,d20,d21 + vsli.64 d26,d20,#25 + veor d19,d24,d25 + vadd.i64 d27,d28 + vbsl d30,d22,d21 @ Maj(a,b,c) + veor d19,d26 @ Sigma0(a) + vadd.i64 d23,d27 + vadd.i64 d30,d27 + @ vadd.i64 d19,d30 + vshr.u64 d24,d23,#14 @ 5 +#if 5<16 + vld1.64 {d5},[r1]! @ handles unaligned +#endif + vshr.u64 d25,d23,#18 +#if 5>0 + vadd.i64 d19,d30 @ h+=Maj from the past +#endif + vshr.u64 d26,d23,#41 + vld1.64 {d28},[r3,:64]! @ K[i++] + vsli.64 d24,d23,#50 + vsli.64 d25,d23,#46 + vmov d29,d23 + vsli.64 d26,d23,#23 +#if 5<16 && defined(__ARMEL__) + vrev64.8 d5,d5 +#endif + veor d25,d24 + vbsl d29,d16,d17 @ Ch(e,f,g) + vshr.u64 d24,d19,#28 + veor d26,d25 @ Sigma1(e) + vadd.i64 d27,d29,d18 + vshr.u64 d25,d19,#34 + vsli.64 d24,d19,#36 + vadd.i64 d27,d26 + vshr.u64 d26,d19,#39 + vadd.i64 d28,d5 + vsli.64 d25,d19,#30 + veor d30,d19,d20 + vsli.64 d26,d19,#25 + veor d18,d24,d25 + vadd.i64 d27,d28 + vbsl d30,d21,d20 @ Maj(a,b,c) + veor d18,d26 @ Sigma0(a) + vadd.i64 d22,d27 + vadd.i64 d30,d27 + @ vadd.i64 d18,d30 + vshr.u64 d24,d22,#14 @ 6 +#if 6<16 + vld1.64 {d6},[r1]! @ handles unaligned +#endif + vshr.u64 d25,d22,#18 +#if 6>0 + vadd.i64 d18,d30 @ h+=Maj from the past +#endif + vshr.u64 d26,d22,#41 + vld1.64 {d28},[r3,:64]! @ K[i++] + vsli.64 d24,d22,#50 + vsli.64 d25,d22,#46 + vmov d29,d22 + vsli.64 d26,d22,#23 +#if 6<16 && defined(__ARMEL__) + vrev64.8 d6,d6 +#endif + veor d25,d24 + vbsl d29,d23,d16 @ Ch(e,f,g) + vshr.u64 d24,d18,#28 + veor d26,d25 @ Sigma1(e) + vadd.i64 d27,d29,d17 + vshr.u64 d25,d18,#34 + vsli.64 d24,d18,#36 + vadd.i64 d27,d26 + vshr.u64 d26,d18,#39 + vadd.i64 d28,d6 + vsli.64 d25,d18,#30 + veor d30,d18,d19 + vsli.64 d26,d18,#25 + veor d17,d24,d25 + vadd.i64 d27,d28 + vbsl d30,d20,d19 @ Maj(a,b,c) + veor d17,d26 @ Sigma0(a) + vadd.i64 d21,d27 + vadd.i64 d30,d27 + @ vadd.i64 d17,d30 + vshr.u64 d24,d21,#14 @ 7 +#if 7<16 + vld1.64 {d7},[r1]! @ handles unaligned +#endif + vshr.u64 d25,d21,#18 +#if 7>0 + vadd.i64 d17,d30 @ h+=Maj from the past +#endif + vshr.u64 d26,d21,#41 + vld1.64 {d28},[r3,:64]! @ K[i++] + vsli.64 d24,d21,#50 + vsli.64 d25,d21,#46 + vmov d29,d21 + vsli.64 d26,d21,#23 +#if 7<16 && defined(__ARMEL__) + vrev64.8 d7,d7 +#endif + veor d25,d24 + vbsl d29,d22,d23 @ Ch(e,f,g) + vshr.u64 d24,d17,#28 + veor d26,d25 @ Sigma1(e) + vadd.i64 d27,d29,d16 + vshr.u64 d25,d17,#34 + vsli.64 d24,d17,#36 + vadd.i64 d27,d26 + vshr.u64 d26,d17,#39 + vadd.i64 d28,d7 + vsli.64 d25,d17,#30 + veor d30,d17,d18 + vsli.64 d26,d17,#25 + veor d16,d24,d25 + vadd.i64 d27,d28 + vbsl d30,d19,d18 @ Maj(a,b,c) + veor d16,d26 @ Sigma0(a) + vadd.i64 d20,d27 + vadd.i64 d30,d27 + @ vadd.i64 d16,d30 + vshr.u64 d24,d20,#14 @ 8 +#if 8<16 + vld1.64 {d8},[r1]! @ handles unaligned +#endif + vshr.u64 d25,d20,#18 +#if 8>0 + vadd.i64 d16,d30 @ h+=Maj from the past +#endif + vshr.u64 d26,d20,#41 + vld1.64 {d28},[r3,:64]! @ K[i++] + vsli.64 d24,d20,#50 + vsli.64 d25,d20,#46 + vmov d29,d20 + vsli.64 d26,d20,#23 +#if 8<16 && defined(__ARMEL__) + vrev64.8 d8,d8 +#endif + veor d25,d24 + vbsl d29,d21,d22 @ Ch(e,f,g) + vshr.u64 d24,d16,#28 + veor d26,d25 @ Sigma1(e) + vadd.i64 d27,d29,d23 + vshr.u64 d25,d16,#34 + vsli.64 d24,d16,#36 + vadd.i64 d27,d26 + vshr.u64 d26,d16,#39 + vadd.i64 d28,d8 + vsli.64 d25,d16,#30 + veor d30,d16,d17 + vsli.64 d26,d16,#25 + veor d23,d24,d25 + vadd.i64 d27,d28 + vbsl d30,d18,d17 @ Maj(a,b,c) + veor d23,d26 @ Sigma0(a) + vadd.i64 d19,d27 + vadd.i64 d30,d27 + @ vadd.i64 d23,d30 + vshr.u64 d24,d19,#14 @ 9 +#if 9<16 + vld1.64 {d9},[r1]! @ handles unaligned +#endif + vshr.u64 d25,d19,#18 +#if 9>0 + vadd.i64 d23,d30 @ h+=Maj from the past +#endif + vshr.u64 d26,d19,#41 + vld1.64 {d28},[r3,:64]! @ K[i++] + vsli.64 d24,d19,#50 + vsli.64 d25,d19,#46 + vmov d29,d19 + vsli.64 d26,d19,#23 +#if 9<16 && defined(__ARMEL__) + vrev64.8 d9,d9 +#endif + veor d25,d24 + vbsl d29,d20,d21 @ Ch(e,f,g) + vshr.u64 d24,d23,#28 + veor d26,d25 @ Sigma1(e) + vadd.i64 d27,d29,d22 + vshr.u64 d25,d23,#34 + vsli.64 d24,d23,#36 + vadd.i64 d27,d26 + vshr.u64 d26,d23,#39 + vadd.i64 d28,d9 + vsli.64 d25,d23,#30 + veor d30,d23,d16 + vsli.64 d26,d23,#25 + veor d22,d24,d25 + vadd.i64 d27,d28 + vbsl d30,d17,d16 @ Maj(a,b,c) + veor d22,d26 @ Sigma0(a) + vadd.i64 d18,d27 + vadd.i64 d30,d27 + @ vadd.i64 d22,d30 + vshr.u64 d24,d18,#14 @ 10 +#if 10<16 + vld1.64 {d10},[r1]! @ handles unaligned +#endif + vshr.u64 d25,d18,#18 +#if 10>0 + vadd.i64 d22,d30 @ h+=Maj from the past +#endif + vshr.u64 d26,d18,#41 + vld1.64 {d28},[r3,:64]! @ K[i++] + vsli.64 d24,d18,#50 + vsli.64 d25,d18,#46 + vmov d29,d18 + vsli.64 d26,d18,#23 +#if 10<16 && defined(__ARMEL__) + vrev64.8 d10,d10 +#endif + veor d25,d24 + vbsl d29,d19,d20 @ Ch(e,f,g) + vshr.u64 d24,d22,#28 + veor d26,d25 @ Sigma1(e) + vadd.i64 d27,d29,d21 + vshr.u64 d25,d22,#34 + vsli.64 d24,d22,#36 + vadd.i64 d27,d26 + vshr.u64 d26,d22,#39 + vadd.i64 d28,d10 + vsli.64 d25,d22,#30 + veor d30,d22,d23 + vsli.64 d26,d22,#25 + veor d21,d24,d25 + vadd.i64 d27,d28 + vbsl d30,d16,d23 @ Maj(a,b,c) + veor d21,d26 @ Sigma0(a) + vadd.i64 d17,d27 + vadd.i64 d30,d27 + @ vadd.i64 d21,d30 + vshr.u64 d24,d17,#14 @ 11 +#if 11<16 + vld1.64 {d11},[r1]! @ handles unaligned +#endif + vshr.u64 d25,d17,#18 +#if 11>0 + vadd.i64 d21,d30 @ h+=Maj from the past +#endif + vshr.u64 d26,d17,#41 + vld1.64 {d28},[r3,:64]! @ K[i++] + vsli.64 d24,d17,#50 + vsli.64 d25,d17,#46 + vmov d29,d17 + vsli.64 d26,d17,#23 +#if 11<16 && defined(__ARMEL__) + vrev64.8 d11,d11 +#endif + veor d25,d24 + vbsl d29,d18,d19 @ Ch(e,f,g) + vshr.u64 d24,d21,#28 + veor d26,d25 @ Sigma1(e) + vadd.i64 d27,d29,d20 + vshr.u64 d25,d21,#34 + vsli.64 d24,d21,#36 + vadd.i64 d27,d26 + vshr.u64 d26,d21,#39 + vadd.i64 d28,d11 + vsli.64 d25,d21,#30 + veor d30,d21,d22 + vsli.64 d26,d21,#25 + veor d20,d24,d25 + vadd.i64 d27,d28 + vbsl d30,d23,d22 @ Maj(a,b,c) + veor d20,d26 @ Sigma0(a) + vadd.i64 d16,d27 + vadd.i64 d30,d27 + @ vadd.i64 d20,d30 + vshr.u64 d24,d16,#14 @ 12 +#if 12<16 + vld1.64 {d12},[r1]! @ handles unaligned +#endif + vshr.u64 d25,d16,#18 +#if 12>0 + vadd.i64 d20,d30 @ h+=Maj from the past +#endif + vshr.u64 d26,d16,#41 + vld1.64 {d28},[r3,:64]! @ K[i++] + vsli.64 d24,d16,#50 + vsli.64 d25,d16,#46 + vmov d29,d16 + vsli.64 d26,d16,#23 +#if 12<16 && defined(__ARMEL__) + vrev64.8 d12,d12 +#endif + veor d25,d24 + vbsl d29,d17,d18 @ Ch(e,f,g) + vshr.u64 d24,d20,#28 + veor d26,d25 @ Sigma1(e) + vadd.i64 d27,d29,d19 + vshr.u64 d25,d20,#34 + vsli.64 d24,d20,#36 + vadd.i64 d27,d26 + vshr.u64 d26,d20,#39 + vadd.i64 d28,d12 + vsli.64 d25,d20,#30 + veor d30,d20,d21 + vsli.64 d26,d20,#25 + veor d19,d24,d25 + vadd.i64 d27,d28 + vbsl d30,d22,d21 @ Maj(a,b,c) + veor d19,d26 @ Sigma0(a) + vadd.i64 d23,d27 + vadd.i64 d30,d27 + @ vadd.i64 d19,d30 + vshr.u64 d24,d23,#14 @ 13 +#if 13<16 + vld1.64 {d13},[r1]! @ handles unaligned +#endif + vshr.u64 d25,d23,#18 +#if 13>0 + vadd.i64 d19,d30 @ h+=Maj from the past +#endif + vshr.u64 d26,d23,#41 + vld1.64 {d28},[r3,:64]! @ K[i++] + vsli.64 d24,d23,#50 + vsli.64 d25,d23,#46 + vmov d29,d23 + vsli.64 d26,d23,#23 +#if 13<16 && defined(__ARMEL__) + vrev64.8 d13,d13 +#endif + veor d25,d24 + vbsl d29,d16,d17 @ Ch(e,f,g) + vshr.u64 d24,d19,#28 + veor d26,d25 @ Sigma1(e) + vadd.i64 d27,d29,d18 + vshr.u64 d25,d19,#34 + vsli.64 d24,d19,#36 + vadd.i64 d27,d26 + vshr.u64 d26,d19,#39 + vadd.i64 d28,d13 + vsli.64 d25,d19,#30 + veor d30,d19,d20 + vsli.64 d26,d19,#25 + veor d18,d24,d25 + vadd.i64 d27,d28 + vbsl d30,d21,d20 @ Maj(a,b,c) + veor d18,d26 @ Sigma0(a) + vadd.i64 d22,d27 + vadd.i64 d30,d27 + @ vadd.i64 d18,d30 + vshr.u64 d24,d22,#14 @ 14 +#if 14<16 + vld1.64 {d14},[r1]! @ handles unaligned +#endif + vshr.u64 d25,d22,#18 +#if 14>0 + vadd.i64 d18,d30 @ h+=Maj from the past +#endif + vshr.u64 d26,d22,#41 + vld1.64 {d28},[r3,:64]! @ K[i++] + vsli.64 d24,d22,#50 + vsli.64 d25,d22,#46 + vmov d29,d22 + vsli.64 d26,d22,#23 +#if 14<16 && defined(__ARMEL__) + vrev64.8 d14,d14 +#endif + veor d25,d24 + vbsl d29,d23,d16 @ Ch(e,f,g) + vshr.u64 d24,d18,#28 + veor d26,d25 @ Sigma1(e) + vadd.i64 d27,d29,d17 + vshr.u64 d25,d18,#34 + vsli.64 d24,d18,#36 + vadd.i64 d27,d26 + vshr.u64 d26,d18,#39 + vadd.i64 d28,d14 + vsli.64 d25,d18,#30 + veor d30,d18,d19 + vsli.64 d26,d18,#25 + veor d17,d24,d25 + vadd.i64 d27,d28 + vbsl d30,d20,d19 @ Maj(a,b,c) + veor d17,d26 @ Sigma0(a) + vadd.i64 d21,d27 + vadd.i64 d30,d27 + @ vadd.i64 d17,d30 + vshr.u64 d24,d21,#14 @ 15 +#if 15<16 + vld1.64 {d15},[r1]! @ handles unaligned +#endif + vshr.u64 d25,d21,#18 +#if 15>0 + vadd.i64 d17,d30 @ h+=Maj from the past +#endif + vshr.u64 d26,d21,#41 + vld1.64 {d28},[r3,:64]! @ K[i++] + vsli.64 d24,d21,#50 + vsli.64 d25,d21,#46 + vmov d29,d21 + vsli.64 d26,d21,#23 +#if 15<16 && defined(__ARMEL__) + vrev64.8 d15,d15 +#endif + veor d25,d24 + vbsl d29,d22,d23 @ Ch(e,f,g) + vshr.u64 d24,d17,#28 + veor d26,d25 @ Sigma1(e) + vadd.i64 d27,d29,d16 + vshr.u64 d25,d17,#34 + vsli.64 d24,d17,#36 + vadd.i64 d27,d26 + vshr.u64 d26,d17,#39 + vadd.i64 d28,d15 + vsli.64 d25,d17,#30 + veor d30,d17,d18 + vsli.64 d26,d17,#25 + veor d16,d24,d25 + vadd.i64 d27,d28 + vbsl d30,d19,d18 @ Maj(a,b,c) + veor d16,d26 @ Sigma0(a) + vadd.i64 d20,d27 + vadd.i64 d30,d27 + @ vadd.i64 d16,d30 + mov r12,#4 +.L16_79_neon: + subs r12,#1 + vshr.u64 q12,q7,#19 + vshr.u64 q13,q7,#61 + vadd.i64 d16,d30 @ h+=Maj from the past + vshr.u64 q15,q7,#6 + vsli.64 q12,q7,#45 + vext.8 q14,q0,q1,#8 @ X[i+1] + vsli.64 q13,q7,#3 + veor q15,q12 + vshr.u64 q12,q14,#1 + veor q15,q13 @ sigma1(X[i+14]) + vshr.u64 q13,q14,#8 + vadd.i64 q0,q15 + vshr.u64 q15,q14,#7 + vsli.64 q12,q14,#63 + vsli.64 q13,q14,#56 + vext.8 q14,q4,q5,#8 @ X[i+9] + veor q15,q12 + vshr.u64 d24,d20,#14 @ from NEON_00_15 + vadd.i64 q0,q14 + vshr.u64 d25,d20,#18 @ from NEON_00_15 + veor q15,q13 @ sigma0(X[i+1]) + vshr.u64 d26,d20,#41 @ from NEON_00_15 + vadd.i64 q0,q15 + vld1.64 {d28},[r3,:64]! @ K[i++] + vsli.64 d24,d20,#50 + vsli.64 d25,d20,#46 + vmov d29,d20 + vsli.64 d26,d20,#23 +#if 16<16 && defined(__ARMEL__) + vrev64.8 , +#endif + veor d25,d24 + vbsl d29,d21,d22 @ Ch(e,f,g) + vshr.u64 d24,d16,#28 + veor d26,d25 @ Sigma1(e) + vadd.i64 d27,d29,d23 + vshr.u64 d25,d16,#34 + vsli.64 d24,d16,#36 + vadd.i64 d27,d26 + vshr.u64 d26,d16,#39 + vadd.i64 d28,d0 + vsli.64 d25,d16,#30 + veor d30,d16,d17 + vsli.64 d26,d16,#25 + veor d23,d24,d25 + vadd.i64 d27,d28 + vbsl d30,d18,d17 @ Maj(a,b,c) + veor d23,d26 @ Sigma0(a) + vadd.i64 d19,d27 + vadd.i64 d30,d27 + @ vadd.i64 d23,d30 + vshr.u64 d24,d19,#14 @ 17 +#if 17<16 + vld1.64 {d1},[r1]! @ handles unaligned +#endif + vshr.u64 d25,d19,#18 +#if 17>0 + vadd.i64 d23,d30 @ h+=Maj from the past +#endif + vshr.u64 d26,d19,#41 + vld1.64 {d28},[r3,:64]! @ K[i++] + vsli.64 d24,d19,#50 + vsli.64 d25,d19,#46 + vmov d29,d19 + vsli.64 d26,d19,#23 +#if 17<16 && defined(__ARMEL__) + vrev64.8 , +#endif + veor d25,d24 + vbsl d29,d20,d21 @ Ch(e,f,g) + vshr.u64 d24,d23,#28 + veor d26,d25 @ Sigma1(e) + vadd.i64 d27,d29,d22 + vshr.u64 d25,d23,#34 + vsli.64 d24,d23,#36 + vadd.i64 d27,d26 + vshr.u64 d26,d23,#39 + vadd.i64 d28,d1 + vsli.64 d25,d23,#30 + veor d30,d23,d16 + vsli.64 d26,d23,#25 + veor d22,d24,d25 + vadd.i64 d27,d28 + vbsl d30,d17,d16 @ Maj(a,b,c) + veor d22,d26 @ Sigma0(a) + vadd.i64 d18,d27 + vadd.i64 d30,d27 + @ vadd.i64 d22,d30 + vshr.u64 q12,q0,#19 + vshr.u64 q13,q0,#61 + vadd.i64 d22,d30 @ h+=Maj from the past + vshr.u64 q15,q0,#6 + vsli.64 q12,q0,#45 + vext.8 q14,q1,q2,#8 @ X[i+1] + vsli.64 q13,q0,#3 + veor q15,q12 + vshr.u64 q12,q14,#1 + veor q15,q13 @ sigma1(X[i+14]) + vshr.u64 q13,q14,#8 + vadd.i64 q1,q15 + vshr.u64 q15,q14,#7 + vsli.64 q12,q14,#63 + vsli.64 q13,q14,#56 + vext.8 q14,q5,q6,#8 @ X[i+9] + veor q15,q12 + vshr.u64 d24,d18,#14 @ from NEON_00_15 + vadd.i64 q1,q14 + vshr.u64 d25,d18,#18 @ from NEON_00_15 + veor q15,q13 @ sigma0(X[i+1]) + vshr.u64 d26,d18,#41 @ from NEON_00_15 + vadd.i64 q1,q15 + vld1.64 {d28},[r3,:64]! @ K[i++] + vsli.64 d24,d18,#50 + vsli.64 d25,d18,#46 + vmov d29,d18 + vsli.64 d26,d18,#23 +#if 18<16 && defined(__ARMEL__) + vrev64.8 , +#endif + veor d25,d24 + vbsl d29,d19,d20 @ Ch(e,f,g) + vshr.u64 d24,d22,#28 + veor d26,d25 @ Sigma1(e) + vadd.i64 d27,d29,d21 + vshr.u64 d25,d22,#34 + vsli.64 d24,d22,#36 + vadd.i64 d27,d26 + vshr.u64 d26,d22,#39 + vadd.i64 d28,d2 + vsli.64 d25,d22,#30 + veor d30,d22,d23 + vsli.64 d26,d22,#25 + veor d21,d24,d25 + vadd.i64 d27,d28 + vbsl d30,d16,d23 @ Maj(a,b,c) + veor d21,d26 @ Sigma0(a) + vadd.i64 d17,d27 + vadd.i64 d30,d27 + @ vadd.i64 d21,d30 + vshr.u64 d24,d17,#14 @ 19 +#if 19<16 + vld1.64 {d3},[r1]! @ handles unaligned +#endif + vshr.u64 d25,d17,#18 +#if 19>0 + vadd.i64 d21,d30 @ h+=Maj from the past +#endif + vshr.u64 d26,d17,#41 + vld1.64 {d28},[r3,:64]! @ K[i++] + vsli.64 d24,d17,#50 + vsli.64 d25,d17,#46 + vmov d29,d17 + vsli.64 d26,d17,#23 +#if 19<16 && defined(__ARMEL__) + vrev64.8 , +#endif + veor d25,d24 + vbsl d29,d18,d19 @ Ch(e,f,g) + vshr.u64 d24,d21,#28 + veor d26,d25 @ Sigma1(e) + vadd.i64 d27,d29,d20 + vshr.u64 d25,d21,#34 + vsli.64 d24,d21,#36 + vadd.i64 d27,d26 + vshr.u64 d26,d21,#39 + vadd.i64 d28,d3 + vsli.64 d25,d21,#30 + veor d30,d21,d22 + vsli.64 d26,d21,#25 + veor d20,d24,d25 + vadd.i64 d27,d28 + vbsl d30,d23,d22 @ Maj(a,b,c) + veor d20,d26 @ Sigma0(a) + vadd.i64 d16,d27 + vadd.i64 d30,d27 + @ vadd.i64 d20,d30 + vshr.u64 q12,q1,#19 + vshr.u64 q13,q1,#61 + vadd.i64 d20,d30 @ h+=Maj from the past + vshr.u64 q15,q1,#6 + vsli.64 q12,q1,#45 + vext.8 q14,q2,q3,#8 @ X[i+1] + vsli.64 q13,q1,#3 + veor q15,q12 + vshr.u64 q12,q14,#1 + veor q15,q13 @ sigma1(X[i+14]) + vshr.u64 q13,q14,#8 + vadd.i64 q2,q15 + vshr.u64 q15,q14,#7 + vsli.64 q12,q14,#63 + vsli.64 q13,q14,#56 + vext.8 q14,q6,q7,#8 @ X[i+9] + veor q15,q12 + vshr.u64 d24,d16,#14 @ from NEON_00_15 + vadd.i64 q2,q14 + vshr.u64 d25,d16,#18 @ from NEON_00_15 + veor q15,q13 @ sigma0(X[i+1]) + vshr.u64 d26,d16,#41 @ from NEON_00_15 + vadd.i64 q2,q15 + vld1.64 {d28},[r3,:64]! @ K[i++] + vsli.64 d24,d16,#50 + vsli.64 d25,d16,#46 + vmov d29,d16 + vsli.64 d26,d16,#23 +#if 20<16 && defined(__ARMEL__) + vrev64.8 , +#endif + veor d25,d24 + vbsl d29,d17,d18 @ Ch(e,f,g) + vshr.u64 d24,d20,#28 + veor d26,d25 @ Sigma1(e) + vadd.i64 d27,d29,d19 + vshr.u64 d25,d20,#34 + vsli.64 d24,d20,#36 + vadd.i64 d27,d26 + vshr.u64 d26,d20,#39 + vadd.i64 d28,d4 + vsli.64 d25,d20,#30 + veor d30,d20,d21 + vsli.64 d26,d20,#25 + veor d19,d24,d25 + vadd.i64 d27,d28 + vbsl d30,d22,d21 @ Maj(a,b,c) + veor d19,d26 @ Sigma0(a) + vadd.i64 d23,d27 + vadd.i64 d30,d27 + @ vadd.i64 d19,d30 + vshr.u64 d24,d23,#14 @ 21 +#if 21<16 + vld1.64 {d5},[r1]! @ handles unaligned +#endif + vshr.u64 d25,d23,#18 +#if 21>0 + vadd.i64 d19,d30 @ h+=Maj from the past +#endif + vshr.u64 d26,d23,#41 + vld1.64 {d28},[r3,:64]! @ K[i++] + vsli.64 d24,d23,#50 + vsli.64 d25,d23,#46 + vmov d29,d23 + vsli.64 d26,d23,#23 +#if 21<16 && defined(__ARMEL__) + vrev64.8 , +#endif + veor d25,d24 + vbsl d29,d16,d17 @ Ch(e,f,g) + vshr.u64 d24,d19,#28 + veor d26,d25 @ Sigma1(e) + vadd.i64 d27,d29,d18 + vshr.u64 d25,d19,#34 + vsli.64 d24,d19,#36 + vadd.i64 d27,d26 + vshr.u64 d26,d19,#39 + vadd.i64 d28,d5 + vsli.64 d25,d19,#30 + veor d30,d19,d20 + vsli.64 d26,d19,#25 + veor d18,d24,d25 + vadd.i64 d27,d28 + vbsl d30,d21,d20 @ Maj(a,b,c) + veor d18,d26 @ Sigma0(a) + vadd.i64 d22,d27 + vadd.i64 d30,d27 + @ vadd.i64 d18,d30 + vshr.u64 q12,q2,#19 + vshr.u64 q13,q2,#61 + vadd.i64 d18,d30 @ h+=Maj from the past + vshr.u64 q15,q2,#6 + vsli.64 q12,q2,#45 + vext.8 q14,q3,q4,#8 @ X[i+1] + vsli.64 q13,q2,#3 + veor q15,q12 + vshr.u64 q12,q14,#1 + veor q15,q13 @ sigma1(X[i+14]) + vshr.u64 q13,q14,#8 + vadd.i64 q3,q15 + vshr.u64 q15,q14,#7 + vsli.64 q12,q14,#63 + vsli.64 q13,q14,#56 + vext.8 q14,q7,q0,#8 @ X[i+9] + veor q15,q12 + vshr.u64 d24,d22,#14 @ from NEON_00_15 + vadd.i64 q3,q14 + vshr.u64 d25,d22,#18 @ from NEON_00_15 + veor q15,q13 @ sigma0(X[i+1]) + vshr.u64 d26,d22,#41 @ from NEON_00_15 + vadd.i64 q3,q15 + vld1.64 {d28},[r3,:64]! @ K[i++] + vsli.64 d24,d22,#50 + vsli.64 d25,d22,#46 + vmov d29,d22 + vsli.64 d26,d22,#23 +#if 22<16 && defined(__ARMEL__) + vrev64.8 , +#endif + veor d25,d24 + vbsl d29,d23,d16 @ Ch(e,f,g) + vshr.u64 d24,d18,#28 + veor d26,d25 @ Sigma1(e) + vadd.i64 d27,d29,d17 + vshr.u64 d25,d18,#34 + vsli.64 d24,d18,#36 + vadd.i64 d27,d26 + vshr.u64 d26,d18,#39 + vadd.i64 d28,d6 + vsli.64 d25,d18,#30 + veor d30,d18,d19 + vsli.64 d26,d18,#25 + veor d17,d24,d25 + vadd.i64 d27,d28 + vbsl d30,d20,d19 @ Maj(a,b,c) + veor d17,d26 @ Sigma0(a) + vadd.i64 d21,d27 + vadd.i64 d30,d27 + @ vadd.i64 d17,d30 + vshr.u64 d24,d21,#14 @ 23 +#if 23<16 + vld1.64 {d7},[r1]! @ handles unaligned +#endif + vshr.u64 d25,d21,#18 +#if 23>0 + vadd.i64 d17,d30 @ h+=Maj from the past +#endif + vshr.u64 d26,d21,#41 + vld1.64 {d28},[r3,:64]! @ K[i++] + vsli.64 d24,d21,#50 + vsli.64 d25,d21,#46 + vmov d29,d21 + vsli.64 d26,d21,#23 +#if 23<16 && defined(__ARMEL__) + vrev64.8 , +#endif + veor d25,d24 + vbsl d29,d22,d23 @ Ch(e,f,g) + vshr.u64 d24,d17,#28 + veor d26,d25 @ Sigma1(e) + vadd.i64 d27,d29,d16 + vshr.u64 d25,d17,#34 + vsli.64 d24,d17,#36 + vadd.i64 d27,d26 + vshr.u64 d26,d17,#39 + vadd.i64 d28,d7 + vsli.64 d25,d17,#30 + veor d30,d17,d18 + vsli.64 d26,d17,#25 + veor d16,d24,d25 + vadd.i64 d27,d28 + vbsl d30,d19,d18 @ Maj(a,b,c) + veor d16,d26 @ Sigma0(a) + vadd.i64 d20,d27 + vadd.i64 d30,d27 + @ vadd.i64 d16,d30 + vshr.u64 q12,q3,#19 + vshr.u64 q13,q3,#61 + vadd.i64 d16,d30 @ h+=Maj from the past + vshr.u64 q15,q3,#6 + vsli.64 q12,q3,#45 + vext.8 q14,q4,q5,#8 @ X[i+1] + vsli.64 q13,q3,#3 + veor q15,q12 + vshr.u64 q12,q14,#1 + veor q15,q13 @ sigma1(X[i+14]) + vshr.u64 q13,q14,#8 + vadd.i64 q4,q15 + vshr.u64 q15,q14,#7 + vsli.64 q12,q14,#63 + vsli.64 q13,q14,#56 + vext.8 q14,q0,q1,#8 @ X[i+9] + veor q15,q12 + vshr.u64 d24,d20,#14 @ from NEON_00_15 + vadd.i64 q4,q14 + vshr.u64 d25,d20,#18 @ from NEON_00_15 + veor q15,q13 @ sigma0(X[i+1]) + vshr.u64 d26,d20,#41 @ from NEON_00_15 + vadd.i64 q4,q15 + vld1.64 {d28},[r3,:64]! @ K[i++] + vsli.64 d24,d20,#50 + vsli.64 d25,d20,#46 + vmov d29,d20 + vsli.64 d26,d20,#23 +#if 24<16 && defined(__ARMEL__) + vrev64.8 , +#endif + veor d25,d24 + vbsl d29,d21,d22 @ Ch(e,f,g) + vshr.u64 d24,d16,#28 + veor d26,d25 @ Sigma1(e) + vadd.i64 d27,d29,d23 + vshr.u64 d25,d16,#34 + vsli.64 d24,d16,#36 + vadd.i64 d27,d26 + vshr.u64 d26,d16,#39 + vadd.i64 d28,d8 + vsli.64 d25,d16,#30 + veor d30,d16,d17 + vsli.64 d26,d16,#25 + veor d23,d24,d25 + vadd.i64 d27,d28 + vbsl d30,d18,d17 @ Maj(a,b,c) + veor d23,d26 @ Sigma0(a) + vadd.i64 d19,d27 + vadd.i64 d30,d27 + @ vadd.i64 d23,d30 + vshr.u64 d24,d19,#14 @ 25 +#if 25<16 + vld1.64 {d9},[r1]! @ handles unaligned +#endif + vshr.u64 d25,d19,#18 +#if 25>0 + vadd.i64 d23,d30 @ h+=Maj from the past +#endif + vshr.u64 d26,d19,#41 + vld1.64 {d28},[r3,:64]! @ K[i++] + vsli.64 d24,d19,#50 + vsli.64 d25,d19,#46 + vmov d29,d19 + vsli.64 d26,d19,#23 +#if 25<16 && defined(__ARMEL__) + vrev64.8 , +#endif + veor d25,d24 + vbsl d29,d20,d21 @ Ch(e,f,g) + vshr.u64 d24,d23,#28 + veor d26,d25 @ Sigma1(e) + vadd.i64 d27,d29,d22 + vshr.u64 d25,d23,#34 + vsli.64 d24,d23,#36 + vadd.i64 d27,d26 + vshr.u64 d26,d23,#39 + vadd.i64 d28,d9 + vsli.64 d25,d23,#30 + veor d30,d23,d16 + vsli.64 d26,d23,#25 + veor d22,d24,d25 + vadd.i64 d27,d28 + vbsl d30,d17,d16 @ Maj(a,b,c) + veor d22,d26 @ Sigma0(a) + vadd.i64 d18,d27 + vadd.i64 d30,d27 + @ vadd.i64 d22,d30 + vshr.u64 q12,q4,#19 + vshr.u64 q13,q4,#61 + vadd.i64 d22,d30 @ h+=Maj from the past + vshr.u64 q15,q4,#6 + vsli.64 q12,q4,#45 + vext.8 q14,q5,q6,#8 @ X[i+1] + vsli.64 q13,q4,#3 + veor q15,q12 + vshr.u64 q12,q14,#1 + veor q15,q13 @ sigma1(X[i+14]) + vshr.u64 q13,q14,#8 + vadd.i64 q5,q15 + vshr.u64 q15,q14,#7 + vsli.64 q12,q14,#63 + vsli.64 q13,q14,#56 + vext.8 q14,q1,q2,#8 @ X[i+9] + veor q15,q12 + vshr.u64 d24,d18,#14 @ from NEON_00_15 + vadd.i64 q5,q14 + vshr.u64 d25,d18,#18 @ from NEON_00_15 + veor q15,q13 @ sigma0(X[i+1]) + vshr.u64 d26,d18,#41 @ from NEON_00_15 + vadd.i64 q5,q15 + vld1.64 {d28},[r3,:64]! @ K[i++] + vsli.64 d24,d18,#50 + vsli.64 d25,d18,#46 + vmov d29,d18 + vsli.64 d26,d18,#23 +#if 26<16 && defined(__ARMEL__) + vrev64.8 , +#endif + veor d25,d24 + vbsl d29,d19,d20 @ Ch(e,f,g) + vshr.u64 d24,d22,#28 + veor d26,d25 @ Sigma1(e) + vadd.i64 d27,d29,d21 + vshr.u64 d25,d22,#34 + vsli.64 d24,d22,#36 + vadd.i64 d27,d26 + vshr.u64 d26,d22,#39 + vadd.i64 d28,d10 + vsli.64 d25,d22,#30 + veor d30,d22,d23 + vsli.64 d26,d22,#25 + veor d21,d24,d25 + vadd.i64 d27,d28 + vbsl d30,d16,d23 @ Maj(a,b,c) + veor d21,d26 @ Sigma0(a) + vadd.i64 d17,d27 + vadd.i64 d30,d27 + @ vadd.i64 d21,d30 + vshr.u64 d24,d17,#14 @ 27 +#if 27<16 + vld1.64 {d11},[r1]! @ handles unaligned +#endif + vshr.u64 d25,d17,#18 +#if 27>0 + vadd.i64 d21,d30 @ h+=Maj from the past +#endif + vshr.u64 d26,d17,#41 + vld1.64 {d28},[r3,:64]! @ K[i++] + vsli.64 d24,d17,#50 + vsli.64 d25,d17,#46 + vmov d29,d17 + vsli.64 d26,d17,#23 +#if 27<16 && defined(__ARMEL__) + vrev64.8 , +#endif + veor d25,d24 + vbsl d29,d18,d19 @ Ch(e,f,g) + vshr.u64 d24,d21,#28 + veor d26,d25 @ Sigma1(e) + vadd.i64 d27,d29,d20 + vshr.u64 d25,d21,#34 + vsli.64 d24,d21,#36 + vadd.i64 d27,d26 + vshr.u64 d26,d21,#39 + vadd.i64 d28,d11 + vsli.64 d25,d21,#30 + veor d30,d21,d22 + vsli.64 d26,d21,#25 + veor d20,d24,d25 + vadd.i64 d27,d28 + vbsl d30,d23,d22 @ Maj(a,b,c) + veor d20,d26 @ Sigma0(a) + vadd.i64 d16,d27 + vadd.i64 d30,d27 + @ vadd.i64 d20,d30 + vshr.u64 q12,q5,#19 + vshr.u64 q13,q5,#61 + vadd.i64 d20,d30 @ h+=Maj from the past + vshr.u64 q15,q5,#6 + vsli.64 q12,q5,#45 + vext.8 q14,q6,q7,#8 @ X[i+1] + vsli.64 q13,q5,#3 + veor q15,q12 + vshr.u64 q12,q14,#1 + veor q15,q13 @ sigma1(X[i+14]) + vshr.u64 q13,q14,#8 + vadd.i64 q6,q15 + vshr.u64 q15,q14,#7 + vsli.64 q12,q14,#63 + vsli.64 q13,q14,#56 + vext.8 q14,q2,q3,#8 @ X[i+9] + veor q15,q12 + vshr.u64 d24,d16,#14 @ from NEON_00_15 + vadd.i64 q6,q14 + vshr.u64 d25,d16,#18 @ from NEON_00_15 + veor q15,q13 @ sigma0(X[i+1]) + vshr.u64 d26,d16,#41 @ from NEON_00_15 + vadd.i64 q6,q15 + vld1.64 {d28},[r3,:64]! @ K[i++] + vsli.64 d24,d16,#50 + vsli.64 d25,d16,#46 + vmov d29,d16 + vsli.64 d26,d16,#23 +#if 28<16 && defined(__ARMEL__) + vrev64.8 , +#endif + veor d25,d24 + vbsl d29,d17,d18 @ Ch(e,f,g) + vshr.u64 d24,d20,#28 + veor d26,d25 @ Sigma1(e) + vadd.i64 d27,d29,d19 + vshr.u64 d25,d20,#34 + vsli.64 d24,d20,#36 + vadd.i64 d27,d26 + vshr.u64 d26,d20,#39 + vadd.i64 d28,d12 + vsli.64 d25,d20,#30 + veor d30,d20,d21 + vsli.64 d26,d20,#25 + veor d19,d24,d25 + vadd.i64 d27,d28 + vbsl d30,d22,d21 @ Maj(a,b,c) + veor d19,d26 @ Sigma0(a) + vadd.i64 d23,d27 + vadd.i64 d30,d27 + @ vadd.i64 d19,d30 + vshr.u64 d24,d23,#14 @ 29 +#if 29<16 + vld1.64 {d13},[r1]! @ handles unaligned +#endif + vshr.u64 d25,d23,#18 +#if 29>0 + vadd.i64 d19,d30 @ h+=Maj from the past +#endif + vshr.u64 d26,d23,#41 + vld1.64 {d28},[r3,:64]! @ K[i++] + vsli.64 d24,d23,#50 + vsli.64 d25,d23,#46 + vmov d29,d23 + vsli.64 d26,d23,#23 +#if 29<16 && defined(__ARMEL__) + vrev64.8 , +#endif + veor d25,d24 + vbsl d29,d16,d17 @ Ch(e,f,g) + vshr.u64 d24,d19,#28 + veor d26,d25 @ Sigma1(e) + vadd.i64 d27,d29,d18 + vshr.u64 d25,d19,#34 + vsli.64 d24,d19,#36 + vadd.i64 d27,d26 + vshr.u64 d26,d19,#39 + vadd.i64 d28,d13 + vsli.64 d25,d19,#30 + veor d30,d19,d20 + vsli.64 d26,d19,#25 + veor d18,d24,d25 + vadd.i64 d27,d28 + vbsl d30,d21,d20 @ Maj(a,b,c) + veor d18,d26 @ Sigma0(a) + vadd.i64 d22,d27 + vadd.i64 d30,d27 + @ vadd.i64 d18,d30 + vshr.u64 q12,q6,#19 + vshr.u64 q13,q6,#61 + vadd.i64 d18,d30 @ h+=Maj from the past + vshr.u64 q15,q6,#6 + vsli.64 q12,q6,#45 + vext.8 q14,q7,q0,#8 @ X[i+1] + vsli.64 q13,q6,#3 + veor q15,q12 + vshr.u64 q12,q14,#1 + veor q15,q13 @ sigma1(X[i+14]) + vshr.u64 q13,q14,#8 + vadd.i64 q7,q15 + vshr.u64 q15,q14,#7 + vsli.64 q12,q14,#63 + vsli.64 q13,q14,#56 + vext.8 q14,q3,q4,#8 @ X[i+9] + veor q15,q12 + vshr.u64 d24,d22,#14 @ from NEON_00_15 + vadd.i64 q7,q14 + vshr.u64 d25,d22,#18 @ from NEON_00_15 + veor q15,q13 @ sigma0(X[i+1]) + vshr.u64 d26,d22,#41 @ from NEON_00_15 + vadd.i64 q7,q15 + vld1.64 {d28},[r3,:64]! @ K[i++] + vsli.64 d24,d22,#50 + vsli.64 d25,d22,#46 + vmov d29,d22 + vsli.64 d26,d22,#23 +#if 30<16 && defined(__ARMEL__) + vrev64.8 , +#endif + veor d25,d24 + vbsl d29,d23,d16 @ Ch(e,f,g) + vshr.u64 d24,d18,#28 + veor d26,d25 @ Sigma1(e) + vadd.i64 d27,d29,d17 + vshr.u64 d25,d18,#34 + vsli.64 d24,d18,#36 + vadd.i64 d27,d26 + vshr.u64 d26,d18,#39 + vadd.i64 d28,d14 + vsli.64 d25,d18,#30 + veor d30,d18,d19 + vsli.64 d26,d18,#25 + veor d17,d24,d25 + vadd.i64 d27,d28 + vbsl d30,d20,d19 @ Maj(a,b,c) + veor d17,d26 @ Sigma0(a) + vadd.i64 d21,d27 + vadd.i64 d30,d27 + @ vadd.i64 d17,d30 + vshr.u64 d24,d21,#14 @ 31 +#if 31<16 + vld1.64 {d15},[r1]! @ handles unaligned +#endif + vshr.u64 d25,d21,#18 +#if 31>0 + vadd.i64 d17,d30 @ h+=Maj from the past +#endif + vshr.u64 d26,d21,#41 + vld1.64 {d28},[r3,:64]! @ K[i++] + vsli.64 d24,d21,#50 + vsli.64 d25,d21,#46 + vmov d29,d21 + vsli.64 d26,d21,#23 +#if 31<16 && defined(__ARMEL__) + vrev64.8 , +#endif + veor d25,d24 + vbsl d29,d22,d23 @ Ch(e,f,g) + vshr.u64 d24,d17,#28 + veor d26,d25 @ Sigma1(e) + vadd.i64 d27,d29,d16 + vshr.u64 d25,d17,#34 + vsli.64 d24,d17,#36 + vadd.i64 d27,d26 + vshr.u64 d26,d17,#39 + vadd.i64 d28,d15 + vsli.64 d25,d17,#30 + veor d30,d17,d18 + vsli.64 d26,d17,#25 + veor d16,d24,d25 + vadd.i64 d27,d28 + vbsl d30,d19,d18 @ Maj(a,b,c) + veor d16,d26 @ Sigma0(a) + vadd.i64 d20,d27 + vadd.i64 d30,d27 + @ vadd.i64 d16,d30 + bne .L16_79_neon + + vadd.i64 d16,d30 @ h+=Maj from the past + vldmia r0,{d24-d31} @ load context to temp + vadd.i64 q8,q12 @ vectorized accumulate + vadd.i64 q9,q13 + vadd.i64 q10,q14 + vadd.i64 q11,q15 + vstmia r0,{d16-d23} @ save context + teq r1,r2 + sub r3,#640 @ rewind K512 + bne .Loop_neon + + VFP_ABI_POP + bx lr @ .word 0xe12fff1e +.size sha512_block_data_order_neon,.-sha512_block_data_order_neon +#endif +.asciz "SHA512 block transform for ARMv4/NEON, CRYPTOGAMS by <appro@openssl.org>" +.align 2 +#if __ARM_MAX_ARCH__>=7 && !defined(__KERNEL__) +.comm OPENSSL_armcap_P,4,4 +#endif diff --git a/arch/arm/crypto/sha512-glue.c b/arch/arm/crypto/sha512-glue.c new file mode 100644 index 000000000..269a394e4 --- /dev/null +++ b/arch/arm/crypto/sha512-glue.c @@ -0,0 +1,121 @@ +/* + * sha512-glue.c - accelerated SHA-384/512 for ARM + * + * Copyright (C) 2015 Linaro Ltd <ard.biesheuvel@linaro.org> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <crypto/internal/hash.h> +#include <crypto/sha.h> +#include <crypto/sha512_base.h> +#include <linux/crypto.h> +#include <linux/module.h> + +#include <asm/hwcap.h> +#include <asm/neon.h> + +#include "sha512.h" + +MODULE_DESCRIPTION("Accelerated SHA-384/SHA-512 secure hash for ARM"); +MODULE_AUTHOR("Ard Biesheuvel <ard.biesheuvel@linaro.org>"); +MODULE_LICENSE("GPL v2"); + +MODULE_ALIAS_CRYPTO("sha384"); +MODULE_ALIAS_CRYPTO("sha512"); +MODULE_ALIAS_CRYPTO("sha384-arm"); +MODULE_ALIAS_CRYPTO("sha512-arm"); + +asmlinkage void sha512_block_data_order(u64 *state, u8 const *src, int blocks); + +int sha512_arm_update(struct shash_desc *desc, const u8 *data, + unsigned int len) +{ + return sha512_base_do_update(desc, data, len, + (sha512_block_fn *)sha512_block_data_order); +} + +int sha512_arm_final(struct shash_desc *desc, u8 *out) +{ + sha512_base_do_finalize(desc, + (sha512_block_fn *)sha512_block_data_order); + return sha512_base_finish(desc, out); +} + +int sha512_arm_finup(struct shash_desc *desc, const u8 *data, + unsigned int len, u8 *out) +{ + sha512_base_do_update(desc, data, len, + (sha512_block_fn *)sha512_block_data_order); + return sha512_arm_final(desc, out); +} + +static struct shash_alg sha512_arm_algs[] = { { + .init = sha384_base_init, + .update = sha512_arm_update, + .final = sha512_arm_final, + .finup = sha512_arm_finup, + .descsize = sizeof(struct sha512_state), + .digestsize = SHA384_DIGEST_SIZE, + .base = { + .cra_name = "sha384", + .cra_driver_name = "sha384-arm", + .cra_priority = 250, + .cra_flags = CRYPTO_ALG_TYPE_SHASH, + .cra_blocksize = SHA512_BLOCK_SIZE, + .cra_module = THIS_MODULE, + } +}, { + .init = sha512_base_init, + .update = sha512_arm_update, + .final = sha512_arm_final, + .finup = sha512_arm_finup, + .descsize = sizeof(struct sha512_state), + .digestsize = SHA512_DIGEST_SIZE, + .base = { + .cra_name = "sha512", + .cra_driver_name = "sha512-arm", + .cra_priority = 250, + .cra_flags = CRYPTO_ALG_TYPE_SHASH, + .cra_blocksize = SHA512_BLOCK_SIZE, + .cra_module = THIS_MODULE, + } +} }; + +static int __init sha512_arm_mod_init(void) +{ + int err; + + err = crypto_register_shashes(sha512_arm_algs, + ARRAY_SIZE(sha512_arm_algs)); + if (err) + return err; + + if (IS_ENABLED(CONFIG_KERNEL_MODE_NEON) && cpu_has_neon()) { + err = crypto_register_shashes(sha512_neon_algs, + ARRAY_SIZE(sha512_neon_algs)); + if (err) + goto err_unregister; + } + return 0; + +err_unregister: + crypto_unregister_shashes(sha512_arm_algs, + ARRAY_SIZE(sha512_arm_algs)); + + return err; +} + +static void __exit sha512_arm_mod_fini(void) +{ + crypto_unregister_shashes(sha512_arm_algs, + ARRAY_SIZE(sha512_arm_algs)); + if (IS_ENABLED(CONFIG_KERNEL_MODE_NEON) && cpu_has_neon()) + crypto_unregister_shashes(sha512_neon_algs, + ARRAY_SIZE(sha512_neon_algs)); +} + +module_init(sha512_arm_mod_init); +module_exit(sha512_arm_mod_fini); diff --git a/arch/arm/crypto/sha512-neon-glue.c b/arch/arm/crypto/sha512-neon-glue.c new file mode 100644 index 000000000..32693684a --- /dev/null +++ b/arch/arm/crypto/sha512-neon-glue.c @@ -0,0 +1,98 @@ +/* + * sha512-neon-glue.c - accelerated SHA-384/512 for ARM NEON + * + * Copyright (C) 2015 Linaro Ltd <ard.biesheuvel@linaro.org> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <crypto/internal/hash.h> +#include <crypto/sha.h> +#include <crypto/sha512_base.h> +#include <linux/crypto.h> +#include <linux/module.h> + +#include <asm/simd.h> +#include <asm/neon.h> + +#include "sha512.h" + +MODULE_ALIAS_CRYPTO("sha384-neon"); +MODULE_ALIAS_CRYPTO("sha512-neon"); + +asmlinkage void sha512_block_data_order_neon(u64 *state, u8 const *src, + int blocks); + +static int sha512_neon_update(struct shash_desc *desc, const u8 *data, + unsigned int len) +{ + struct sha512_state *sctx = shash_desc_ctx(desc); + + if (!may_use_simd() || + (sctx->count[0] % SHA512_BLOCK_SIZE) + len < SHA512_BLOCK_SIZE) + return sha512_arm_update(desc, data, len); + + kernel_neon_begin(); + sha512_base_do_update(desc, data, len, + (sha512_block_fn *)sha512_block_data_order_neon); + kernel_neon_end(); + + return 0; +} + +static int sha512_neon_finup(struct shash_desc *desc, const u8 *data, + unsigned int len, u8 *out) +{ + if (!may_use_simd()) + return sha512_arm_finup(desc, data, len, out); + + kernel_neon_begin(); + if (len) + sha512_base_do_update(desc, data, len, + (sha512_block_fn *)sha512_block_data_order_neon); + sha512_base_do_finalize(desc, + (sha512_block_fn *)sha512_block_data_order_neon); + kernel_neon_end(); + + return sha512_base_finish(desc, out); +} + +static int sha512_neon_final(struct shash_desc *desc, u8 *out) +{ + return sha512_neon_finup(desc, NULL, 0, out); +} + +struct shash_alg sha512_neon_algs[] = { { + .init = sha384_base_init, + .update = sha512_neon_update, + .final = sha512_neon_final, + .finup = sha512_neon_finup, + .descsize = sizeof(struct sha512_state), + .digestsize = SHA384_DIGEST_SIZE, + .base = { + .cra_name = "sha384", + .cra_driver_name = "sha384-neon", + .cra_priority = 300, + .cra_flags = CRYPTO_ALG_TYPE_SHASH, + .cra_blocksize = SHA384_BLOCK_SIZE, + .cra_module = THIS_MODULE, + + } +}, { + .init = sha512_base_init, + .update = sha512_neon_update, + .final = sha512_neon_final, + .finup = sha512_neon_finup, + .descsize = sizeof(struct sha512_state), + .digestsize = SHA512_DIGEST_SIZE, + .base = { + .cra_name = "sha512", + .cra_driver_name = "sha512-neon", + .cra_priority = 300, + .cra_flags = CRYPTO_ALG_TYPE_SHASH, + .cra_blocksize = SHA512_BLOCK_SIZE, + .cra_module = THIS_MODULE, + } +} }; diff --git a/arch/arm/crypto/sha512.h b/arch/arm/crypto/sha512.h new file mode 100644 index 000000000..a75d9a829 --- /dev/null +++ b/arch/arm/crypto/sha512.h @@ -0,0 +1,8 @@ + +int sha512_arm_update(struct shash_desc *desc, const u8 *data, + unsigned int len); + +int sha512_arm_finup(struct shash_desc *desc, const u8 *data, + unsigned int len, u8 *out); + +extern struct shash_alg sha512_neon_algs[2]; diff --git a/arch/arm/crypto/sha512_neon_glue.c b/arch/arm/crypto/sha512_neon_glue.c deleted file mode 100644 index b124dce83..000000000 --- a/arch/arm/crypto/sha512_neon_glue.c +++ /dev/null @@ -1,305 +0,0 @@ -/* - * Glue code for the SHA512 Secure Hash Algorithm assembly implementation - * using NEON instructions. - * - * Copyright © 2014 Jussi Kivilinna <jussi.kivilinna@iki.fi> - * - * This file is based on sha512_ssse3_glue.c: - * Copyright (C) 2013 Intel Corporation - * Author: Tim Chen <tim.c.chen@linux.intel.com> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the Free - * Software Foundation; either version 2 of the License, or (at your option) - * any later version. - * - */ - -#include <crypto/internal/hash.h> -#include <linux/init.h> -#include <linux/module.h> -#include <linux/mm.h> -#include <linux/cryptohash.h> -#include <linux/types.h> -#include <linux/string.h> -#include <crypto/sha.h> -#include <asm/byteorder.h> -#include <asm/simd.h> -#include <asm/neon.h> - - -static const u64 sha512_k[] = { - 0x428a2f98d728ae22ULL, 0x7137449123ef65cdULL, - 0xb5c0fbcfec4d3b2fULL, 0xe9b5dba58189dbbcULL, - 0x3956c25bf348b538ULL, 0x59f111f1b605d019ULL, - 0x923f82a4af194f9bULL, 0xab1c5ed5da6d8118ULL, - 0xd807aa98a3030242ULL, 0x12835b0145706fbeULL, - 0x243185be4ee4b28cULL, 0x550c7dc3d5ffb4e2ULL, - 0x72be5d74f27b896fULL, 0x80deb1fe3b1696b1ULL, - 0x9bdc06a725c71235ULL, 0xc19bf174cf692694ULL, - 0xe49b69c19ef14ad2ULL, 0xefbe4786384f25e3ULL, - 0x0fc19dc68b8cd5b5ULL, 0x240ca1cc77ac9c65ULL, - 0x2de92c6f592b0275ULL, 0x4a7484aa6ea6e483ULL, - 0x5cb0a9dcbd41fbd4ULL, 0x76f988da831153b5ULL, - 0x983e5152ee66dfabULL, 0xa831c66d2db43210ULL, - 0xb00327c898fb213fULL, 0xbf597fc7beef0ee4ULL, - 0xc6e00bf33da88fc2ULL, 0xd5a79147930aa725ULL, - 0x06ca6351e003826fULL, 0x142929670a0e6e70ULL, - 0x27b70a8546d22ffcULL, 0x2e1b21385c26c926ULL, - 0x4d2c6dfc5ac42aedULL, 0x53380d139d95b3dfULL, - 0x650a73548baf63deULL, 0x766a0abb3c77b2a8ULL, - 0x81c2c92e47edaee6ULL, 0x92722c851482353bULL, - 0xa2bfe8a14cf10364ULL, 0xa81a664bbc423001ULL, - 0xc24b8b70d0f89791ULL, 0xc76c51a30654be30ULL, - 0xd192e819d6ef5218ULL, 0xd69906245565a910ULL, - 0xf40e35855771202aULL, 0x106aa07032bbd1b8ULL, - 0x19a4c116b8d2d0c8ULL, 0x1e376c085141ab53ULL, - 0x2748774cdf8eeb99ULL, 0x34b0bcb5e19b48a8ULL, - 0x391c0cb3c5c95a63ULL, 0x4ed8aa4ae3418acbULL, - 0x5b9cca4f7763e373ULL, 0x682e6ff3d6b2b8a3ULL, - 0x748f82ee5defb2fcULL, 0x78a5636f43172f60ULL, - 0x84c87814a1f0ab72ULL, 0x8cc702081a6439ecULL, - 0x90befffa23631e28ULL, 0xa4506cebde82bde9ULL, - 0xbef9a3f7b2c67915ULL, 0xc67178f2e372532bULL, - 0xca273eceea26619cULL, 0xd186b8c721c0c207ULL, - 0xeada7dd6cde0eb1eULL, 0xf57d4f7fee6ed178ULL, - 0x06f067aa72176fbaULL, 0x0a637dc5a2c898a6ULL, - 0x113f9804bef90daeULL, 0x1b710b35131c471bULL, - 0x28db77f523047d84ULL, 0x32caab7b40c72493ULL, - 0x3c9ebe0a15c9bebcULL, 0x431d67c49c100d4cULL, - 0x4cc5d4becb3e42b6ULL, 0x597f299cfc657e2aULL, - 0x5fcb6fab3ad6faecULL, 0x6c44198c4a475817ULL -}; - - -asmlinkage void sha512_transform_neon(u64 *digest, const void *data, - const u64 k[], unsigned int num_blks); - - -static int sha512_neon_init(struct shash_desc *desc) -{ - struct sha512_state *sctx = shash_desc_ctx(desc); - - sctx->state[0] = SHA512_H0; - sctx->state[1] = SHA512_H1; - sctx->state[2] = SHA512_H2; - sctx->state[3] = SHA512_H3; - sctx->state[4] = SHA512_H4; - sctx->state[5] = SHA512_H5; - sctx->state[6] = SHA512_H6; - sctx->state[7] = SHA512_H7; - sctx->count[0] = sctx->count[1] = 0; - - return 0; -} - -static int __sha512_neon_update(struct shash_desc *desc, const u8 *data, - unsigned int len, unsigned int partial) -{ - struct sha512_state *sctx = shash_desc_ctx(desc); - unsigned int done = 0; - - sctx->count[0] += len; - if (sctx->count[0] < len) - sctx->count[1]++; - - if (partial) { - done = SHA512_BLOCK_SIZE - partial; - memcpy(sctx->buf + partial, data, done); - sha512_transform_neon(sctx->state, sctx->buf, sha512_k, 1); - } - - if (len - done >= SHA512_BLOCK_SIZE) { - const unsigned int rounds = (len - done) / SHA512_BLOCK_SIZE; - - sha512_transform_neon(sctx->state, data + done, sha512_k, - rounds); - - done += rounds * SHA512_BLOCK_SIZE; - } - - memcpy(sctx->buf, data + done, len - done); - - return 0; -} - -static int sha512_neon_update(struct shash_desc *desc, const u8 *data, - unsigned int len) -{ - struct sha512_state *sctx = shash_desc_ctx(desc); - unsigned int partial = sctx->count[0] % SHA512_BLOCK_SIZE; - int res; - - /* Handle the fast case right here */ - if (partial + len < SHA512_BLOCK_SIZE) { - sctx->count[0] += len; - if (sctx->count[0] < len) - sctx->count[1]++; - memcpy(sctx->buf + partial, data, len); - - return 0; - } - - if (!may_use_simd()) { - res = crypto_sha512_update(desc, data, len); - } else { - kernel_neon_begin(); - res = __sha512_neon_update(desc, data, len, partial); - kernel_neon_end(); - } - - return res; -} - - -/* Add padding and return the message digest. */ -static int sha512_neon_final(struct shash_desc *desc, u8 *out) -{ - struct sha512_state *sctx = shash_desc_ctx(desc); - unsigned int i, index, padlen; - __be64 *dst = (__be64 *)out; - __be64 bits[2]; - static const u8 padding[SHA512_BLOCK_SIZE] = { 0x80, }; - - /* save number of bits */ - bits[1] = cpu_to_be64(sctx->count[0] << 3); - bits[0] = cpu_to_be64(sctx->count[1] << 3 | sctx->count[0] >> 61); - - /* Pad out to 112 mod 128 and append length */ - index = sctx->count[0] & 0x7f; - padlen = (index < 112) ? (112 - index) : ((128+112) - index); - - if (!may_use_simd()) { - crypto_sha512_update(desc, padding, padlen); - crypto_sha512_update(desc, (const u8 *)&bits, sizeof(bits)); - } else { - kernel_neon_begin(); - /* We need to fill a whole block for __sha512_neon_update() */ - if (padlen <= 112) { - sctx->count[0] += padlen; - if (sctx->count[0] < padlen) - sctx->count[1]++; - memcpy(sctx->buf + index, padding, padlen); - } else { - __sha512_neon_update(desc, padding, padlen, index); - } - __sha512_neon_update(desc, (const u8 *)&bits, - sizeof(bits), 112); - kernel_neon_end(); - } - - /* Store state in digest */ - for (i = 0; i < 8; i++) - dst[i] = cpu_to_be64(sctx->state[i]); - - /* Wipe context */ - memset(sctx, 0, sizeof(*sctx)); - - return 0; -} - -static int sha512_neon_export(struct shash_desc *desc, void *out) -{ - struct sha512_state *sctx = shash_desc_ctx(desc); - - memcpy(out, sctx, sizeof(*sctx)); - - return 0; -} - -static int sha512_neon_import(struct shash_desc *desc, const void *in) -{ - struct sha512_state *sctx = shash_desc_ctx(desc); - - memcpy(sctx, in, sizeof(*sctx)); - - return 0; -} - -static int sha384_neon_init(struct shash_desc *desc) -{ - struct sha512_state *sctx = shash_desc_ctx(desc); - - sctx->state[0] = SHA384_H0; - sctx->state[1] = SHA384_H1; - sctx->state[2] = SHA384_H2; - sctx->state[3] = SHA384_H3; - sctx->state[4] = SHA384_H4; - sctx->state[5] = SHA384_H5; - sctx->state[6] = SHA384_H6; - sctx->state[7] = SHA384_H7; - - sctx->count[0] = sctx->count[1] = 0; - - return 0; -} - -static int sha384_neon_final(struct shash_desc *desc, u8 *hash) -{ - u8 D[SHA512_DIGEST_SIZE]; - - sha512_neon_final(desc, D); - - memcpy(hash, D, SHA384_DIGEST_SIZE); - memzero_explicit(D, SHA512_DIGEST_SIZE); - - return 0; -} - -static struct shash_alg algs[] = { { - .digestsize = SHA512_DIGEST_SIZE, - .init = sha512_neon_init, - .update = sha512_neon_update, - .final = sha512_neon_final, - .export = sha512_neon_export, - .import = sha512_neon_import, - .descsize = sizeof(struct sha512_state), - .statesize = sizeof(struct sha512_state), - .base = { - .cra_name = "sha512", - .cra_driver_name = "sha512-neon", - .cra_priority = 250, - .cra_flags = CRYPTO_ALG_TYPE_SHASH, - .cra_blocksize = SHA512_BLOCK_SIZE, - .cra_module = THIS_MODULE, - } -}, { - .digestsize = SHA384_DIGEST_SIZE, - .init = sha384_neon_init, - .update = sha512_neon_update, - .final = sha384_neon_final, - .export = sha512_neon_export, - .import = sha512_neon_import, - .descsize = sizeof(struct sha512_state), - .statesize = sizeof(struct sha512_state), - .base = { - .cra_name = "sha384", - .cra_driver_name = "sha384-neon", - .cra_priority = 250, - .cra_flags = CRYPTO_ALG_TYPE_SHASH, - .cra_blocksize = SHA384_BLOCK_SIZE, - .cra_module = THIS_MODULE, - } -} }; - -static int __init sha512_neon_mod_init(void) -{ - if (!cpu_has_neon()) - return -ENODEV; - - return crypto_register_shashes(algs, ARRAY_SIZE(algs)); -} - -static void __exit sha512_neon_mod_fini(void) -{ - crypto_unregister_shashes(algs, ARRAY_SIZE(algs)); -} - -module_init(sha512_neon_mod_init); -module_exit(sha512_neon_mod_fini); - -MODULE_LICENSE("GPL"); -MODULE_DESCRIPTION("SHA512 Secure Hash Algorithm, NEON accelerated"); - -MODULE_ALIAS_CRYPTO("sha512"); -MODULE_ALIAS_CRYPTO("sha384"); diff --git a/arch/arm/include/asm/Kbuild b/arch/arm/include/asm/Kbuild index 3c4596d0c..30b3bc166 100644 --- a/arch/arm/include/asm/Kbuild +++ b/arch/arm/include/asm/Kbuild @@ -13,6 +13,7 @@ generic-y += kdebug.h generic-y += local.h generic-y += local64.h generic-y += mcs_spinlock.h +generic-y += mm-arch-hooks.h generic-y += msgbuf.h generic-y += param.h generic-y += parport.h @@ -20,7 +21,6 @@ generic-y += poll.h generic-y += preempt.h generic-y += resource.h generic-y += rwsem.h -generic-y += scatterlist.h generic-y += seccomp.h generic-y += sections.h generic-y += segment.h diff --git a/arch/arm/include/asm/assembler.h b/arch/arm/include/asm/assembler.h index 186270b3e..4abe57279 100644 --- a/arch/arm/include/asm/assembler.h +++ b/arch/arm/include/asm/assembler.h @@ -178,6 +178,21 @@ .endm /* + * Assembly version of "adr rd, BSYM(sym)". This should only be used to + * reference local symbols in the same assembly file which are to be + * resolved by the assembler. Other usage is undefined. + */ + .irp c,,eq,ne,cs,cc,mi,pl,vs,vc,hi,ls,ge,lt,gt,le,hs,lo + .macro badr\c, rd, sym +#ifdef CONFIG_THUMB2_KERNEL + adr\c \rd, \sym + 1 +#else + adr\c \rd, \sym +#endif + .endm + .endr + +/* * Get current thread_info. */ .macro get_thread_info, rd @@ -326,7 +341,7 @@ THUMB( orr \reg , \reg , #PSR_T_BIT ) bne 1f orr \reg, \reg, #PSR_A_BIT - adr lr, BSYM(2f) + badr lr, 2f msr spsr_cxsf, \reg __MSR_ELR_HYP(14) __ERET diff --git a/arch/arm/include/asm/barrier.h b/arch/arm/include/asm/barrier.h index d2f81e6b8..6c2327e1c 100644 --- a/arch/arm/include/asm/barrier.h +++ b/arch/arm/include/asm/barrier.h @@ -81,7 +81,7 @@ do { \ #define read_barrier_depends() do { } while(0) #define smp_read_barrier_depends() do { } while(0) -#define set_mb(var, value) do { var = value; smp_mb(); } while (0) +#define smp_store_mb(var, value) do { WRITE_ONCE(var, value); smp_mb(); } while (0) #define smp_mb__before_atomic() smp_mb() #define smp_mb__after_atomic() smp_mb() diff --git a/arch/arm/include/asm/cacheflush.h b/arch/arm/include/asm/cacheflush.h index 2d46862e7..4812cda8f 100644 --- a/arch/arm/include/asm/cacheflush.h +++ b/arch/arm/include/asm/cacheflush.h @@ -482,10 +482,17 @@ static inline void __sync_cache_range_r(volatile void *p, size_t size) : : : "r0","r1","r2","r3","r4","r5","r6","r7", \ "r9","r10","lr","memory" ) +#ifdef CONFIG_MMU int set_memory_ro(unsigned long addr, int numpages); int set_memory_rw(unsigned long addr, int numpages); int set_memory_x(unsigned long addr, int numpages); int set_memory_nx(unsigned long addr, int numpages); +#else +static inline int set_memory_ro(unsigned long addr, int numpages) { return 0; } +static inline int set_memory_rw(unsigned long addr, int numpages) { return 0; } +static inline int set_memory_x(unsigned long addr, int numpages) { return 0; } +static inline int set_memory_nx(unsigned long addr, int numpages) { return 0; } +#endif #ifdef CONFIG_DEBUG_RODATA void mark_rodata_ro(void); diff --git a/arch/arm/include/asm/cmpxchg.h b/arch/arm/include/asm/cmpxchg.h index abb2c3769..1692a05d3 100644 --- a/arch/arm/include/asm/cmpxchg.h +++ b/arch/arm/include/asm/cmpxchg.h @@ -94,6 +94,7 @@ static inline unsigned long __xchg(unsigned long x, volatile void *ptr, int size break; #endif default: + /* Cause a link-time error, the xchg() size is not supported */ __bad_xchg(ptr, size), ret = 0; break; } @@ -102,8 +103,10 @@ static inline unsigned long __xchg(unsigned long x, volatile void *ptr, int size return ret; } -#define xchg(ptr,x) \ - ((__typeof__(*(ptr)))__xchg((unsigned long)(x),(ptr),sizeof(*(ptr)))) +#define xchg(ptr, x) ({ \ + (__typeof__(*(ptr)))__xchg((unsigned long)(x), (ptr), \ + sizeof(*(ptr))); \ +}) #include <asm-generic/cmpxchg-local.h> @@ -118,14 +121,16 @@ static inline unsigned long __xchg(unsigned long x, volatile void *ptr, int size * cmpxchg_local and cmpxchg64_local are atomic wrt current CPU. Always make * them available. */ -#define cmpxchg_local(ptr, o, n) \ - ((__typeof__(*(ptr)))__cmpxchg_local_generic((ptr), (unsigned long)(o),\ - (unsigned long)(n), sizeof(*(ptr)))) +#define cmpxchg_local(ptr, o, n) ({ \ + (__typeof(*ptr))__cmpxchg_local_generic((ptr), \ + (unsigned long)(o), \ + (unsigned long)(n), \ + sizeof(*(ptr))); \ +}) + #define cmpxchg64_local(ptr, o, n) __cmpxchg64_local_generic((ptr), (o), (n)) -#ifndef CONFIG_SMP #include <asm-generic/cmpxchg.h> -#endif #else /* min ARCH >= ARMv6 */ @@ -201,11 +206,12 @@ static inline unsigned long __cmpxchg_mb(volatile void *ptr, unsigned long old, return ret; } -#define cmpxchg(ptr,o,n) \ - ((__typeof__(*(ptr)))__cmpxchg_mb((ptr), \ - (unsigned long)(o), \ - (unsigned long)(n), \ - sizeof(*(ptr)))) +#define cmpxchg(ptr,o,n) ({ \ + (__typeof__(*(ptr)))__cmpxchg_mb((ptr), \ + (unsigned long)(o), \ + (unsigned long)(n), \ + sizeof(*(ptr))); \ +}) static inline unsigned long __cmpxchg_local(volatile void *ptr, unsigned long old, @@ -227,6 +233,13 @@ static inline unsigned long __cmpxchg_local(volatile void *ptr, return ret; } +#define cmpxchg_local(ptr, o, n) ({ \ + (__typeof(*ptr))__cmpxchg_local((ptr), \ + (unsigned long)(o), \ + (unsigned long)(n), \ + sizeof(*(ptr))); \ +}) + static inline unsigned long long __cmpxchg64(unsigned long long *ptr, unsigned long long old, unsigned long long new) @@ -252,6 +265,14 @@ static inline unsigned long long __cmpxchg64(unsigned long long *ptr, return oldval; } +#define cmpxchg64_relaxed(ptr, o, n) ({ \ + (__typeof__(*(ptr)))__cmpxchg64((ptr), \ + (unsigned long long)(o), \ + (unsigned long long)(n)); \ +}) + +#define cmpxchg64_local(ptr, o, n) cmpxchg64_relaxed((ptr), (o), (n)) + static inline unsigned long long __cmpxchg64_mb(unsigned long long *ptr, unsigned long long old, unsigned long long new) @@ -265,23 +286,11 @@ static inline unsigned long long __cmpxchg64_mb(unsigned long long *ptr, return ret; } -#define cmpxchg_local(ptr,o,n) \ - ((__typeof__(*(ptr)))__cmpxchg_local((ptr), \ - (unsigned long)(o), \ - (unsigned long)(n), \ - sizeof(*(ptr)))) - -#define cmpxchg64(ptr, o, n) \ - ((__typeof__(*(ptr)))__cmpxchg64_mb((ptr), \ - (unsigned long long)(o), \ - (unsigned long long)(n))) - -#define cmpxchg64_relaxed(ptr, o, n) \ - ((__typeof__(*(ptr)))__cmpxchg64((ptr), \ - (unsigned long long)(o), \ - (unsigned long long)(n))) - -#define cmpxchg64_local(ptr, o, n) cmpxchg64_relaxed((ptr), (o), (n)) +#define cmpxchg64(ptr, o, n) ({ \ + (__typeof__(*(ptr)))__cmpxchg64_mb((ptr), \ + (unsigned long long)(o), \ + (unsigned long long)(n)); \ +}) #endif /* __LINUX_ARM_ARCH__ >= 6 */ diff --git a/arch/arm/include/asm/dma.h b/arch/arm/include/asm/dma.h index 99084431d..bb4fa67da 100644 --- a/arch/arm/include/asm/dma.h +++ b/arch/arm/include/asm/dma.h @@ -19,7 +19,7 @@ * It should not be re-used except for that purpose. */ #include <linux/spinlock.h> -#include <asm/scatterlist.h> +#include <linux/scatterlist.h> #include <mach/isa-dma.h> diff --git a/arch/arm/include/asm/edac.h b/arch/arm/include/asm/edac.h index 0df7a2c1f..5189fa819 100644 --- a/arch/arm/include/asm/edac.h +++ b/arch/arm/include/asm/edac.h @@ -18,11 +18,12 @@ #define ASM_EDAC_H /* * ECC atomic, DMA, SMP and interrupt safe scrub function. - * Implements the per arch atomic_scrub() that EDAC use for software + * Implements the per arch edac_atomic_scrub() that EDAC use for software * ECC scrubbing. It reads memory and then writes back the original * value, allowing the hardware to detect and correct memory errors. */ -static inline void atomic_scrub(void *va, u32 size) + +static inline void edac_atomic_scrub(void *va, u32 size) { #if __LINUX_ARM_ARCH__ >= 6 unsigned int *virt_addr = va; diff --git a/arch/arm/include/asm/entry-macro-multi.S b/arch/arm/include/asm/entry-macro-multi.S index 469a2b30f..609184f52 100644 --- a/arch/arm/include/asm/entry-macro-multi.S +++ b/arch/arm/include/asm/entry-macro-multi.S @@ -10,7 +10,7 @@ @ @ routine called with r0 = irq number, r1 = struct pt_regs * @ - adrne lr, BSYM(1b) + badrne lr, 1b bne asm_do_IRQ #ifdef CONFIG_SMP @@ -23,7 +23,7 @@ ALT_SMP(test_for_ipi r0, r2, r6, lr) ALT_UP_B(9997f) movne r1, sp - adrne lr, BSYM(1b) + badrne lr, 1b bne do_IPI #endif 9997: diff --git a/arch/arm/include/asm/firmware.h b/arch/arm/include/asm/firmware.h index 89aefe10d..34c1d96ef 100644 --- a/arch/arm/include/asm/firmware.h +++ b/arch/arm/include/asm/firmware.h @@ -34,6 +34,10 @@ struct firmware_ops { */ int (*set_cpu_boot_addr)(int cpu, unsigned long boot_addr); /* + * Gets boot address of specified physical CPU + */ + int (*get_cpu_boot_addr)(int cpu, unsigned long *boot_addr); + /* * Boots specified physical CPU */ int (*cpu_boot)(int cpu); diff --git a/arch/arm/include/asm/futex.h b/arch/arm/include/asm/futex.h index 4e78065a1..5eed82809 100644 --- a/arch/arm/include/asm/futex.h +++ b/arch/arm/include/asm/futex.h @@ -93,6 +93,7 @@ futex_atomic_cmpxchg_inatomic(u32 *uval, u32 __user *uaddr, if (!access_ok(VERIFY_WRITE, uaddr, sizeof(u32))) return -EFAULT; + preempt_disable(); __asm__ __volatile__("@futex_atomic_cmpxchg_inatomic\n" "1: " TUSER(ldr) " %1, [%4]\n" " teq %1, %2\n" @@ -104,6 +105,8 @@ futex_atomic_cmpxchg_inatomic(u32 *uval, u32 __user *uaddr, : "cc", "memory"); *uval = val; + preempt_enable(); + return ret; } @@ -124,7 +127,10 @@ futex_atomic_op_inuser (int encoded_op, u32 __user *uaddr) if (!access_ok(VERIFY_WRITE, uaddr, sizeof(u32))) return -EFAULT; - pagefault_disable(); /* implies preempt_disable() */ +#ifndef CONFIG_SMP + preempt_disable(); +#endif + pagefault_disable(); switch (op) { case FUTEX_OP_SET: @@ -146,7 +152,10 @@ futex_atomic_op_inuser (int encoded_op, u32 __user *uaddr) ret = -ENOSYS; } - pagefault_enable(); /* subsumes preempt_enable() */ + pagefault_enable(); +#ifndef CONFIG_SMP + preempt_enable(); +#endif if (!ret) { switch (cmp) { diff --git a/arch/arm/include/asm/hardware/arm_timer.h b/arch/arm/include/asm/hardware/arm_timer.h deleted file mode 100644 index d6030ff59..000000000 --- a/arch/arm/include/asm/hardware/arm_timer.h +++ /dev/null @@ -1,35 +0,0 @@ -#ifndef __ASM_ARM_HARDWARE_ARM_TIMER_H -#define __ASM_ARM_HARDWARE_ARM_TIMER_H - -/* - * ARM timer implementation, found in Integrator, Versatile and Realview - * platforms. Not all platforms support all registers and bits in these - * registers, so we mark them with A for Integrator AP, C for Integrator - * CP, V for Versatile and R for Realview. - * - * Integrator AP has 16-bit timers, Integrator CP, Versatile and Realview - * can have 16-bit or 32-bit selectable via a bit in the control register. - * - * Every SP804 contains two identical timers. - */ -#define TIMER_1_BASE 0x00 -#define TIMER_2_BASE 0x20 - -#define TIMER_LOAD 0x00 /* ACVR rw */ -#define TIMER_VALUE 0x04 /* ACVR ro */ -#define TIMER_CTRL 0x08 /* ACVR rw */ -#define TIMER_CTRL_ONESHOT (1 << 0) /* CVR */ -#define TIMER_CTRL_32BIT (1 << 1) /* CVR */ -#define TIMER_CTRL_DIV1 (0 << 2) /* ACVR */ -#define TIMER_CTRL_DIV16 (1 << 2) /* ACVR */ -#define TIMER_CTRL_DIV256 (2 << 2) /* ACVR */ -#define TIMER_CTRL_IE (1 << 5) /* VR */ -#define TIMER_CTRL_PERIODIC (1 << 6) /* ACVR */ -#define TIMER_CTRL_ENABLE (1 << 7) /* ACVR */ - -#define TIMER_INTCLR 0x0c /* ACVR wo */ -#define TIMER_RIS 0x10 /* CVR ro */ -#define TIMER_MIS 0x14 /* CVR ro */ -#define TIMER_BGLOAD 0x18 /* CVR rw */ - -#endif diff --git a/arch/arm/include/asm/hardware/timer-sp.h b/arch/arm/include/asm/hardware/timer-sp.h deleted file mode 100644 index bb28af7c3..000000000 --- a/arch/arm/include/asm/hardware/timer-sp.h +++ /dev/null @@ -1,23 +0,0 @@ -struct clk; - -void __sp804_clocksource_and_sched_clock_init(void __iomem *, - const char *, struct clk *, int); -void __sp804_clockevents_init(void __iomem *, unsigned int, - struct clk *, const char *); - -static inline void sp804_clocksource_init(void __iomem *base, const char *name) -{ - __sp804_clocksource_and_sched_clock_init(base, name, NULL, 0); -} - -static inline void sp804_clocksource_and_sched_clock_init(void __iomem *base, - const char *name) -{ - __sp804_clocksource_and_sched_clock_init(base, name, NULL, 1); -} - -static inline void sp804_clockevents_init(void __iomem *base, unsigned int irq, const char *name) -{ - __sp804_clockevents_init(base, irq, NULL, name); - -} diff --git a/arch/arm/include/asm/hugetlb.h b/arch/arm/include/asm/hugetlb.h index 1f1b1cd11..7d26f6c4f 100644 --- a/arch/arm/include/asm/hugetlb.h +++ b/arch/arm/include/asm/hugetlb.h @@ -53,10 +53,6 @@ static inline int prepare_hugepage_range(struct file *file, return 0; } -static inline void hugetlb_prefault_arch_hook(struct mm_struct *mm) -{ -} - static inline int huge_pte_none(pte_t pte) { return pte_none(pte); @@ -67,15 +63,6 @@ static inline pte_t huge_pte_wrprotect(pte_t pte) return pte_wrprotect(pte); } -static inline int arch_prepare_hugepage(struct page *page) -{ - return 0; -} - -static inline void arch_release_hugepage(struct page *page) -{ -} - static inline void arch_clear_hugepage_flags(struct page *page) { clear_bit(PG_dcache_clean, &page->flags); diff --git a/arch/arm/include/asm/io.h b/arch/arm/include/asm/io.h index db58deb00..485982084 100644 --- a/arch/arm/include/asm/io.h +++ b/arch/arm/include/asm/io.h @@ -23,6 +23,7 @@ #ifdef __KERNEL__ +#include <linux/string.h> #include <linux/types.h> #include <linux/blk_types.h> #include <asm/byteorder.h> @@ -73,17 +74,16 @@ void __raw_readsl(const volatile void __iomem *addr, void *data, int longlen); static inline void __raw_writew(u16 val, volatile void __iomem *addr) { asm volatile("strh %1, %0" - : "+Q" (*(volatile u16 __force *)addr) - : "r" (val)); + : : "Q" (*(volatile u16 __force *)addr), "r" (val)); } #define __raw_readw __raw_readw static inline u16 __raw_readw(const volatile void __iomem *addr) { u16 val; - asm volatile("ldrh %1, %0" - : "+Q" (*(volatile u16 __force *)addr), - "=r" (val)); + asm volatile("ldrh %0, %1" + : "=r" (val) + : "Q" (*(volatile u16 __force *)addr)); return val; } #endif @@ -92,25 +92,23 @@ static inline u16 __raw_readw(const volatile void __iomem *addr) static inline void __raw_writeb(u8 val, volatile void __iomem *addr) { asm volatile("strb %1, %0" - : "+Qo" (*(volatile u8 __force *)addr) - : "r" (val)); + : : "Qo" (*(volatile u8 __force *)addr), "r" (val)); } #define __raw_writel __raw_writel static inline void __raw_writel(u32 val, volatile void __iomem *addr) { asm volatile("str %1, %0" - : "+Qo" (*(volatile u32 __force *)addr) - : "r" (val)); + : : "Qo" (*(volatile u32 __force *)addr), "r" (val)); } #define __raw_readb __raw_readb static inline u8 __raw_readb(const volatile void __iomem *addr) { u8 val; - asm volatile("ldrb %1, %0" - : "+Qo" (*(volatile u8 __force *)addr), - "=r" (val)); + asm volatile("ldrb %0, %1" + : "=r" (val) + : "Qo" (*(volatile u8 __force *)addr)); return val; } @@ -118,9 +116,9 @@ static inline u8 __raw_readb(const volatile void __iomem *addr) static inline u32 __raw_readl(const volatile void __iomem *addr) { u32 val; - asm volatile("ldr %1, %0" - : "+Qo" (*(volatile u32 __force *)addr), - "=r" (val)); + asm volatile("ldr %0, %1" + : "=r" (val) + : "Qo" (*(volatile u32 __force *)addr)); return val; } @@ -142,16 +140,11 @@ static inline u32 __raw_readl(const volatile void __iomem *addr) * The _caller variety takes a __builtin_return_address(0) value for * /proc/vmalloc to use - and should only be used in non-inline functions. */ -extern void __iomem *__arm_ioremap_pfn_caller(unsigned long, unsigned long, - size_t, unsigned int, void *); extern void __iomem *__arm_ioremap_caller(phys_addr_t, size_t, unsigned int, void *); - extern void __iomem *__arm_ioremap_pfn(unsigned long, unsigned long, size_t, unsigned int); -extern void __iomem *__arm_ioremap(phys_addr_t, size_t, unsigned int); extern void __iomem *__arm_ioremap_exec(phys_addr_t, size_t, bool cached); extern void __iounmap(volatile void __iomem *addr); -extern void __arm_iounmap(volatile void __iomem *addr); extern void __iomem * (*arch_ioremap_caller)(phys_addr_t, size_t, unsigned int, void *); @@ -319,24 +312,95 @@ extern void _memset_io(volatile void __iomem *, int, size_t); #define writesw(p,d,l) __raw_writesw(p,d,l) #define writesl(p,d,l) __raw_writesl(p,d,l) +#ifndef __ARMBE__ +static inline void memset_io(volatile void __iomem *dst, unsigned c, + size_t count) +{ + extern void mmioset(void *, unsigned int, size_t); + mmioset((void __force *)dst, c, count); +} +#define memset_io(dst,c,count) memset_io(dst,c,count) + +static inline void memcpy_fromio(void *to, const volatile void __iomem *from, + size_t count) +{ + extern void mmiocpy(void *, const void *, size_t); + mmiocpy(to, (const void __force *)from, count); +} +#define memcpy_fromio(to,from,count) memcpy_fromio(to,from,count) + +static inline void memcpy_toio(volatile void __iomem *to, const void *from, + size_t count) +{ + extern void mmiocpy(void *, const void *, size_t); + mmiocpy((void __force *)to, from, count); +} +#define memcpy_toio(to,from,count) memcpy_toio(to,from,count) + +#else #define memset_io(c,v,l) _memset_io(c,(v),(l)) #define memcpy_fromio(a,c,l) _memcpy_fromio((a),c,(l)) #define memcpy_toio(c,a,l) _memcpy_toio(c,(a),(l)) +#endif #endif /* readl */ /* - * ioremap and friends. + * ioremap() and friends. + * + * ioremap() takes a resource address, and size. Due to the ARM memory + * types, it is important to use the correct ioremap() function as each + * mapping has specific properties. + * + * Function Memory type Cacheability Cache hint + * ioremap() Device n/a n/a + * ioremap_nocache() Device n/a n/a + * ioremap_cache() Normal Writeback Read allocate + * ioremap_wc() Normal Non-cacheable n/a + * ioremap_wt() Normal Non-cacheable n/a + * + * All device mappings have the following properties: + * - no access speculation + * - no repetition (eg, on return from an exception) + * - number, order and size of accesses are maintained + * - unaligned accesses are "unpredictable" + * - writes may be delayed before they hit the endpoint device * - * ioremap takes a PCI memory address, as specified in - * Documentation/io-mapping.txt. + * ioremap_nocache() is the same as ioremap() as there are too many device + * drivers using this for device registers, and documentation which tells + * people to use it for such for this to be any different. This is not a + * safe fallback for memory-like mappings, or memory regions where the + * compiler may generate unaligned accesses - eg, via inlining its own + * memcpy. * + * All normal memory mappings have the following properties: + * - reads can be repeated with no side effects + * - repeated reads return the last value written + * - reads can fetch additional locations without side effects + * - writes can be repeated (in certain cases) with no side effects + * - writes can be merged before accessing the target + * - unaligned accesses can be supported + * - ordering is not guaranteed without explicit dependencies or barrier + * instructions + * - writes may be delayed before they hit the endpoint memory + * + * The cache hint is only a performance hint: CPUs may alias these hints. + * Eg, a CPU not implementing read allocate but implementing write allocate + * will provide a write allocate mapping instead. */ -#define ioremap(cookie,size) __arm_ioremap((cookie), (size), MT_DEVICE) -#define ioremap_nocache(cookie,size) __arm_ioremap((cookie), (size), MT_DEVICE) -#define ioremap_cache(cookie,size) __arm_ioremap((cookie), (size), MT_DEVICE_CACHED) -#define ioremap_wc(cookie,size) __arm_ioremap((cookie), (size), MT_DEVICE_WC) -#define iounmap __arm_iounmap +void __iomem *ioremap(resource_size_t res_cookie, size_t size); +#define ioremap ioremap +#define ioremap_nocache ioremap + +void __iomem *ioremap_cache(resource_size_t res_cookie, size_t size); +#define ioremap_cache ioremap_cache + +void __iomem *ioremap_wc(resource_size_t res_cookie, size_t size); +#define ioremap_wc ioremap_wc +#define ioremap_wt ioremap_wc + +void iounmap(volatile void __iomem *iomem_cookie); +#define iounmap iounmap /* * io{read,write}{16,32}be() macros diff --git a/arch/arm/include/asm/irqflags.h b/arch/arm/include/asm/irqflags.h index 3b763d665..43908146a 100644 --- a/arch/arm/include/asm/irqflags.h +++ b/arch/arm/include/asm/irqflags.h @@ -20,6 +20,7 @@ #if __LINUX_ARM_ARCH__ >= 6 +#define arch_local_irq_save arch_local_irq_save static inline unsigned long arch_local_irq_save(void) { unsigned long flags; @@ -31,6 +32,7 @@ static inline unsigned long arch_local_irq_save(void) return flags; } +#define arch_local_irq_enable arch_local_irq_enable static inline void arch_local_irq_enable(void) { asm volatile( @@ -40,6 +42,7 @@ static inline void arch_local_irq_enable(void) : "memory", "cc"); } +#define arch_local_irq_disable arch_local_irq_disable static inline void arch_local_irq_disable(void) { asm volatile( @@ -56,6 +59,7 @@ static inline void arch_local_irq_disable(void) /* * Save the current interrupt enable state & disable IRQs */ +#define arch_local_irq_save arch_local_irq_save static inline unsigned long arch_local_irq_save(void) { unsigned long flags, temp; @@ -73,6 +77,7 @@ static inline unsigned long arch_local_irq_save(void) /* * Enable IRQs */ +#define arch_local_irq_enable arch_local_irq_enable static inline void arch_local_irq_enable(void) { unsigned long temp; @@ -88,6 +93,7 @@ static inline void arch_local_irq_enable(void) /* * Disable IRQs */ +#define arch_local_irq_disable arch_local_irq_disable static inline void arch_local_irq_disable(void) { unsigned long temp; @@ -135,6 +141,7 @@ static inline void arch_local_irq_disable(void) /* * Save the current interrupt enable state. */ +#define arch_local_save_flags arch_local_save_flags static inline unsigned long arch_local_save_flags(void) { unsigned long flags; @@ -147,6 +154,7 @@ static inline unsigned long arch_local_save_flags(void) /* * restore saved IRQ & FIQ state */ +#define arch_local_irq_restore arch_local_irq_restore static inline void arch_local_irq_restore(unsigned long flags) { asm volatile( @@ -156,10 +164,13 @@ static inline void arch_local_irq_restore(unsigned long flags) : "memory", "cc"); } +#define arch_irqs_disabled_flags arch_irqs_disabled_flags static inline int arch_irqs_disabled_flags(unsigned long flags) { return flags & IRQMASK_I_BIT; } +#include <asm-generic/irqflags.h> + #endif /* ifdef __KERNEL__ */ #endif /* ifndef __ASM_ARM_IRQFLAGS_H */ diff --git a/arch/arm/include/asm/kvm_asm.h b/arch/arm/include/asm/kvm_asm.h index 25410b2d8..194c91b61 100644 --- a/arch/arm/include/asm/kvm_asm.h +++ b/arch/arm/include/asm/kvm_asm.h @@ -23,7 +23,7 @@ #define c0_MPIDR 1 /* MultiProcessor ID Register */ #define c0_CSSELR 2 /* Cache Size Selection Register */ #define c1_SCTLR 3 /* System Control Register */ -#define c1_ACTLR 4 /* Auxilliary Control Register */ +#define c1_ACTLR 4 /* Auxiliary Control Register */ #define c1_CPACR 5 /* Coprocessor Access Control */ #define c2_TTBR0 6 /* Translation Table Base Register 0 */ #define c2_TTBR0_high 7 /* TTBR0 top 32 bits */ diff --git a/arch/arm/include/asm/kvm_host.h b/arch/arm/include/asm/kvm_host.h index d71607c16..e896d2c19 100644 --- a/arch/arm/include/asm/kvm_host.h +++ b/arch/arm/include/asm/kvm_host.h @@ -218,11 +218,6 @@ static inline int kvm_arch_dev_ioctl_check_extension(long ext) return 0; } -static inline void vgic_arch_setup(const struct vgic_params *vgic) -{ - BUG_ON(vgic->type != VGIC_V2); -} - int kvm_perf_init(void); int kvm_perf_teardown(void); diff --git a/arch/arm/include/asm/mach/arch.h b/arch/arm/include/asm/mach/arch.h index 0406cb3f1..cb3a40717 100644 --- a/arch/arm/include/asm/mach/arch.h +++ b/arch/arm/include/asm/mach/arch.h @@ -51,7 +51,7 @@ struct machine_desc { bool (*smp_init)(void); void (*fixup)(struct tag *, char **); void (*dt_fixup)(void); - void (*init_meminfo)(void); + long long (*pv_fixup)(void); void (*reserve)(void);/* reserve mem blocks */ void (*map_io)(void);/* IO mapping function */ void (*init_early)(void); diff --git a/arch/arm/include/asm/mcpm.h b/arch/arm/include/asm/mcpm.h index 50b378f59..acd4983d9 100644 --- a/arch/arm/include/asm/mcpm.h +++ b/arch/arm/include/asm/mcpm.h @@ -137,17 +137,12 @@ int mcpm_wait_for_cpu_powerdown(unsigned int cpu, unsigned int cluster); /** * mcpm_cpu_suspend - bring the calling CPU in a suspended state * - * @expected_residency: duration in microseconds the CPU is expected - * to remain suspended, or 0 if unknown/infinity. - * - * The calling CPU is suspended. The expected residency argument is used - * as a hint by the platform specific backend to implement the appropriate - * sleep state level according to the knowledge it has on wake-up latency - * for the given hardware. + * The calling CPU is suspended. This is similar to mcpm_cpu_power_down() + * except for possible extra platform specific configuration steps to allow + * an asynchronous wake-up e.g. with a pending interrupt. * * If this CPU is found to be the "last man standing" in the cluster - * then the cluster may be prepared for power-down too, if the expected - * residency makes it worthwhile. + * then the cluster may be prepared for power-down too. * * This must be called with interrupts disabled. * @@ -157,7 +152,7 @@ int mcpm_wait_for_cpu_powerdown(unsigned int cpu, unsigned int cluster); * This will return if mcpm_platform_register() has not been called * previously in which case the caller should take appropriate action. */ -void mcpm_cpu_suspend(u64 expected_residency); +void mcpm_cpu_suspend(void); /** * mcpm_cpu_powered_up - housekeeping workafter a CPU has been powered up @@ -234,12 +229,6 @@ struct mcpm_platform_ops { void (*cpu_is_up)(unsigned int cpu, unsigned int cluster); void (*cluster_is_up)(unsigned int cluster); int (*wait_for_powerdown)(unsigned int cpu, unsigned int cluster); - - /* deprecated callbacks */ - int (*power_up)(unsigned int cpu, unsigned int cluster); - void (*power_down)(void); - void (*suspend)(u64); - void (*powered_up)(void); }; /** @@ -251,35 +240,6 @@ struct mcpm_platform_ops { */ int __init mcpm_platform_register(const struct mcpm_platform_ops *ops); -/* Synchronisation structures for coordinating safe cluster setup/teardown: */ - -/* - * When modifying this structure, make sure you update the MCPM_SYNC_ defines - * to match. - */ -struct mcpm_sync_struct { - /* individual CPU states */ - struct { - s8 cpu __aligned(__CACHE_WRITEBACK_GRANULE); - } cpus[MAX_CPUS_PER_CLUSTER]; - - /* cluster state */ - s8 cluster __aligned(__CACHE_WRITEBACK_GRANULE); - - /* inbound-side state */ - s8 inbound __aligned(__CACHE_WRITEBACK_GRANULE); -}; - -struct sync_struct { - struct mcpm_sync_struct clusters[MAX_NR_CLUSTERS]; -}; - -void __mcpm_cpu_going_down(unsigned int cpu, unsigned int cluster); -void __mcpm_cpu_down(unsigned int cpu, unsigned int cluster); -void __mcpm_outbound_leave_critical(unsigned int cluster, int state); -bool __mcpm_outbound_enter_critical(unsigned int this_cpu, unsigned int cluster); -int __mcpm_cluster_state(unsigned int cluster); - /** * mcpm_sync_init - Initialize the cluster synchronization support * @@ -318,6 +278,29 @@ int __init mcpm_loopback(void (*cache_disable)(void)); void __init mcpm_smp_set_ops(void); +/* + * Synchronisation structures for coordinating safe cluster setup/teardown. + * This is private to the MCPM core code and shared between C and assembly. + * When modifying this structure, make sure you update the MCPM_SYNC_ defines + * to match. + */ +struct mcpm_sync_struct { + /* individual CPU states */ + struct { + s8 cpu __aligned(__CACHE_WRITEBACK_GRANULE); + } cpus[MAX_CPUS_PER_CLUSTER]; + + /* cluster state */ + s8 cluster __aligned(__CACHE_WRITEBACK_GRANULE); + + /* inbound-side state */ + s8 inbound __aligned(__CACHE_WRITEBACK_GRANULE); +}; + +struct sync_struct { + struct mcpm_sync_struct clusters[MAX_NR_CLUSTERS]; +}; + #else /* diff --git a/arch/arm/include/asm/memory.h b/arch/arm/include/asm/memory.h index 184def0e1..b7f6fb462 100644 --- a/arch/arm/include/asm/memory.h +++ b/arch/arm/include/asm/memory.h @@ -18,8 +18,6 @@ #include <linux/types.h> #include <linux/sizes.h> -#include <asm/cache.h> - #ifdef CONFIG_NEED_MACH_MEMORY_H #include <mach/memory.h> #endif @@ -133,20 +131,6 @@ #define phys_to_page(phys) (pfn_to_page(__phys_to_pfn(phys))) /* - * Minimum guaranted alignment in pgd_alloc(). The page table pointers passed - * around in head.S and proc-*.S are shifted by this amount, in order to - * leave spare high bits for systems with physical address extension. This - * does not fully accomodate the 40-bit addressing capability of ARM LPAE, but - * gives us about 38-bits or so. - */ -#ifdef CONFIG_ARM_LPAE -#define ARCH_PGD_SHIFT L1_CACHE_SHIFT -#else -#define ARCH_PGD_SHIFT 0 -#endif -#define ARCH_PGD_MASK ((1 << ARCH_PGD_SHIFT) - 1) - -/* * PLAT_PHYS_OFFSET is the offset (from zero) of the start of physical * memory. This is used for XIP and NoMMU kernels, and on platforms that don't * have CONFIG_ARM_PATCH_PHYS_VIRT. Assembly code must always use @@ -291,7 +275,7 @@ static inline void *phys_to_virt(phys_addr_t x) */ #define __pa(x) __virt_to_phys((unsigned long)(x)) #define __va(x) ((void *)__phys_to_virt((phys_addr_t)(x))) -#define pfn_to_kaddr(pfn) __va((pfn) << PAGE_SHIFT) +#define pfn_to_kaddr(pfn) __va((phys_addr_t)(pfn) << PAGE_SHIFT) extern phys_addr_t (*arch_virt_to_idmap)(unsigned long x); @@ -302,7 +286,7 @@ extern phys_addr_t (*arch_virt_to_idmap)(unsigned long x); */ static inline phys_addr_t __virt_to_idmap(unsigned long x) { - if (arch_virt_to_idmap) + if (IS_ENABLED(CONFIG_MMU) && arch_virt_to_idmap) return arch_virt_to_idmap(x); else return __virt_to_phys(x); diff --git a/arch/arm/include/asm/module.h b/arch/arm/include/asm/module.h index ed690c49e..e358b7966 100644 --- a/arch/arm/include/asm/module.h +++ b/arch/arm/include/asm/module.h @@ -16,11 +16,21 @@ enum { ARM_SEC_UNLIKELY, ARM_SEC_MAX, }; +#endif struct mod_arch_specific { +#ifdef CONFIG_ARM_UNWIND struct unwind_table *unwind[ARM_SEC_MAX]; -}; #endif +#ifdef CONFIG_ARM_MODULE_PLTS + struct elf32_shdr *core_plt; + struct elf32_shdr *init_plt; + int core_plt_count; + int init_plt_count; +#endif +}; + +u32 get_module_plt(struct module *mod, unsigned long loc, Elf32_Addr val); /* * Add the ARM architecture version to the version magic string diff --git a/arch/arm/include/asm/pci.h b/arch/arm/include/asm/pci.h index 585dc33a7..a5635444c 100644 --- a/arch/arm/include/asm/pci.h +++ b/arch/arm/include/asm/pci.h @@ -31,16 +31,6 @@ static inline int pci_proc_domain(struct pci_bus *bus) */ #define PCI_DMA_BUS_IS_PHYS (1) -#ifdef CONFIG_PCI -static inline void pci_dma_burst_advice(struct pci_dev *pdev, - enum pci_dma_burst_strategy *strat, - unsigned long *strategy_parameter) -{ - *strat = PCI_DMA_BURST_INFINITY; - *strategy_parameter = ~0UL; -} -#endif - #define HAVE_PCI_MMAP extern int pci_mmap_page_range(struct pci_dev *dev, struct vm_area_struct *vma, enum pci_mmap_state mmap_state, int write_combine); diff --git a/arch/arm/include/asm/perf_event.h b/arch/arm/include/asm/perf_event.h index d9cf138fd..4f9dec489 100644 --- a/arch/arm/include/asm/perf_event.h +++ b/arch/arm/include/asm/perf_event.h @@ -19,4 +19,11 @@ extern unsigned long perf_misc_flags(struct pt_regs *regs); #define perf_misc_flags(regs) perf_misc_flags(regs) #endif +#define perf_arch_fetch_caller_regs(regs, __ip) { \ + (regs)->ARM_pc = (__ip); \ + (regs)->ARM_fp = (unsigned long) __builtin_frame_address(0); \ + (regs)->ARM_sp = current_stack_pointer; \ + (regs)->ARM_cpsr = SVC_MODE; \ +} + #endif /* __ARM_PERF_EVENT_H__ */ diff --git a/arch/arm/include/asm/pgtable-2level.h b/arch/arm/include/asm/pgtable-2level.h index bfd662e49..aeddd28b3 100644 --- a/arch/arm/include/asm/pgtable-2level.h +++ b/arch/arm/include/asm/pgtable-2level.h @@ -129,7 +129,36 @@ /* * These are the memory types, defined to be compatible with - * pre-ARMv6 CPUs cacheable and bufferable bits: XXCB + * pre-ARMv6 CPUs cacheable and bufferable bits: n/a,n/a,C,B + * ARMv6+ without TEX remapping, they are a table index. + * ARMv6+ with TEX remapping, they correspond to n/a,TEX(0),C,B + * + * MT type Pre-ARMv6 ARMv6+ type / cacheable status + * UNCACHED Uncached Strongly ordered + * BUFFERABLE Bufferable Normal memory / non-cacheable + * WRITETHROUGH Writethrough Normal memory / write through + * WRITEBACK Writeback Normal memory / write back, read alloc + * MINICACHE Minicache N/A + * WRITEALLOC Writeback Normal memory / write back, write alloc + * DEV_SHARED Uncached Device memory (shared) + * DEV_NONSHARED Uncached Device memory (non-shared) + * DEV_WC Bufferable Normal memory / non-cacheable + * DEV_CACHED Writeback Normal memory / write back, read alloc + * VECTORS Variable Normal memory / variable + * + * All normal memory mappings have the following properties: + * - reads can be repeated with no side effects + * - repeated reads return the last value written + * - reads can fetch additional locations without side effects + * - writes can be repeated (in certain cases) with no side effects + * - writes can be merged before accessing the target + * - unaligned accesses can be supported + * + * All device mappings have the following properties: + * - no access speculation + * - no repetition (eg, on return from an exception) + * - number, order and size of accesses are maintained + * - unaligned accesses are "unpredictable" */ #define L_PTE_MT_UNCACHED (_AT(pteval_t, 0x00) << 2) /* 0000 */ #define L_PTE_MT_BUFFERABLE (_AT(pteval_t, 0x01) << 2) /* 0001 */ diff --git a/arch/arm/include/asm/pmu.h b/arch/arm/include/asm/pmu.h index 675e4ab79..3fc87dfd7 100644 --- a/arch/arm/include/asm/pmu.h +++ b/arch/arm/include/asm/pmu.h @@ -24,22 +24,10 @@ * interrupt and passed the address of the low level handler, * and can be used to implement any platform specific handling * before or after calling it. - * @runtime_resume: an optional handler which will be called by the - * runtime PM framework following a call to pm_runtime_get(). - * Note that if pm_runtime_get() is called more than once in - * succession this handler will only be called once. - * @runtime_suspend: an optional handler which will be called by the - * runtime PM framework following a call to pm_runtime_put(). - * Note that if pm_runtime_get() is called more than once in - * succession this handler will only be called following the - * final call to pm_runtime_put() that actually disables the - * hardware. */ struct arm_pmu_platdata { irqreturn_t (*handle_irq)(int irq, void *dev, irq_handler_t pmu_handler); - int (*runtime_resume)(struct device *dev); - int (*runtime_suspend)(struct device *dev); }; #ifdef CONFIG_HW_PERF_EVENTS @@ -92,6 +80,7 @@ struct pmu_hw_events { struct arm_pmu { struct pmu pmu; cpumask_t active_irqs; + cpumask_t supported_cpus; int *irq_affinity; char *name; irqreturn_t (*handle_irq)(int irq_num, void *dev); @@ -122,8 +111,6 @@ struct arm_pmu { #define to_arm_pmu(p) (container_of(p, struct arm_pmu, pmu)) -extern const struct dev_pm_ops armpmu_dev_pm_ops; - int armpmu_register(struct arm_pmu *armpmu, int type); u64 armpmu_event_update(struct perf_event *event); @@ -158,6 +145,10 @@ struct pmu_probe_info { #define XSCALE_PMU_PROBE(_version, _fn) \ PMU_PROBE(ARM_CPU_IMP_INTEL << 24 | _version, ARM_PMU_XSCALE_MASK, _fn) +int arm_pmu_device_probe(struct platform_device *pdev, + const struct of_device_id *of_table, + const struct pmu_probe_info *probe_table); + #endif /* CONFIG_HW_PERF_EVENTS */ #endif /* __ARM_PMU_H__ */ diff --git a/arch/arm/include/asm/proc-fns.h b/arch/arm/include/asm/proc-fns.h index 5324c1112..8877ad5ff 100644 --- a/arch/arm/include/asm/proc-fns.h +++ b/arch/arm/include/asm/proc-fns.h @@ -125,13 +125,6 @@ extern void cpu_resume(void); ttbr; \ }) -#define cpu_set_ttbr(nr, val) \ - do { \ - u64 ttbr = val; \ - __asm__("mcrr p15, " #nr ", %Q0, %R0, c2" \ - : : "r" (ttbr)); \ - } while (0) - #define cpu_get_pgd() \ ({ \ u64 pg = cpu_get_ttbr(0); \ diff --git a/arch/arm/include/asm/smp.h b/arch/arm/include/asm/smp.h index 18f5a5541..2f3ac1ba6 100644 --- a/arch/arm/include/asm/smp.h +++ b/arch/arm/include/asm/smp.h @@ -61,7 +61,7 @@ asmlinkage void secondary_start_kernel(void); struct secondary_data { union { unsigned long mpu_rgn_szr; - unsigned long pgdir; + u64 pgdir; }; unsigned long swapper_pg_dir; void *stack; @@ -69,6 +69,7 @@ struct secondary_data { extern struct secondary_data secondary_data; extern volatile int pen_release; extern void secondary_startup(void); +extern void secondary_startup_arm(void); extern int __cpu_disable(void); diff --git a/arch/arm/include/asm/suspend.h b/arch/arm/include/asm/suspend.h index cd20029bc..6c7182f32 100644 --- a/arch/arm/include/asm/suspend.h +++ b/arch/arm/include/asm/suspend.h @@ -7,6 +7,7 @@ struct sleep_save_sp { }; extern void cpu_resume(void); +extern void cpu_resume_arm(void); extern int cpu_suspend(unsigned long, int (*)(unsigned long)); #endif diff --git a/arch/arm/include/asm/system_info.h b/arch/arm/include/asm/system_info.h index 720ea0320..3860cbd40 100644 --- a/arch/arm/include/asm/system_info.h +++ b/arch/arm/include/asm/system_info.h @@ -17,6 +17,7 @@ /* information about the system we're running on */ extern unsigned int system_rev; +extern const char *system_serial; extern unsigned int system_serial_low; extern unsigned int system_serial_high; extern unsigned int mem_fclk_21285; diff --git a/arch/arm/include/asm/topology.h b/arch/arm/include/asm/topology.h index 2fe85fff5..370f7a732 100644 --- a/arch/arm/include/asm/topology.h +++ b/arch/arm/include/asm/topology.h @@ -18,7 +18,7 @@ extern struct cputopo_arm cpu_topology[NR_CPUS]; #define topology_physical_package_id(cpu) (cpu_topology[cpu].socket_id) #define topology_core_id(cpu) (cpu_topology[cpu].core_id) #define topology_core_cpumask(cpu) (&cpu_topology[cpu].core_sibling) -#define topology_thread_cpumask(cpu) (&cpu_topology[cpu].thread_sibling) +#define topology_sibling_cpumask(cpu) (&cpu_topology[cpu].thread_sibling) void init_cpu_topology(void); void store_cpu_topology(unsigned int cpuid); diff --git a/arch/arm/include/asm/unified.h b/arch/arm/include/asm/unified.h index 200f9a7cd..a91ae4996 100644 --- a/arch/arm/include/asm/unified.h +++ b/arch/arm/include/asm/unified.h @@ -45,7 +45,6 @@ #define THUMB(x...) x #ifdef __ASSEMBLY__ #define W(instr) instr.w -#define BSYM(sym) sym + 1 #else #define WASM(instr) #instr ".w" #endif @@ -59,7 +58,6 @@ #define THUMB(x...) #ifdef __ASSEMBLY__ #define W(instr) instr -#define BSYM(sym) sym #else #define WASM(instr) #instr #endif diff --git a/arch/arm/include/asm/vfp.h b/arch/arm/include/asm/vfp.h index ee5f30842..22e414056 100644 --- a/arch/arm/include/asm/vfp.h +++ b/arch/arm/include/asm/vfp.h @@ -5,6 +5,9 @@ * First, the standard VFP set. */ +#ifndef __ASM_VFP_H +#define __ASM_VFP_H + #define FPSID cr0 #define FPSCR cr1 #define MVFR1 cr6 @@ -87,3 +90,9 @@ #define VFPOPDESC_UNUSED_BIT (24) #define VFPOPDESC_UNUSED_MASK (0xFF << VFPOPDESC_UNUSED_BIT) #define VFPOPDESC_OPDESC_MASK (~(VFPOPDESC_LENGTH_MASK | VFPOPDESC_UNUSED_MASK)) + +#ifndef __ASSEMBLY__ +void vfp_disable(void); +#endif + +#endif /* __ASM_VFP_H */ diff --git a/arch/arm/include/asm/xen/hypervisor.h b/arch/arm/include/asm/xen/hypervisor.h index 1317ee40f..04ff8e7b3 100644 --- a/arch/arm/include/asm/xen/hypervisor.h +++ b/arch/arm/include/asm/xen/hypervisor.h @@ -1,6 +1,8 @@ #ifndef _ASM_ARM_XEN_HYPERVISOR_H #define _ASM_ARM_XEN_HYPERVISOR_H +#include <linux/init.h> + extern struct shared_info *HYPERVISOR_shared_info; extern struct start_info *xen_start_info; @@ -18,4 +20,10 @@ static inline enum paravirt_lazy_mode paravirt_get_lazy_mode(void) extern struct dma_map_ops *xen_dma_ops; +#ifdef CONFIG_XEN +void __init xen_early_init(void); +#else +static inline void xen_early_init(void) { return; } +#endif + #endif /* _ASM_ARM_XEN_HYPERVISOR_H */ diff --git a/arch/arm/include/asm/xen/page.h b/arch/arm/include/asm/xen/page.h index 0b579b2f4..1bee8ca12 100644 --- a/arch/arm/include/asm/xen/page.h +++ b/arch/arm/include/asm/xen/page.h @@ -12,7 +12,6 @@ #include <xen/interface/grant_table.h> #define phys_to_machine_mapping_valid(pfn) (1) -#define mfn_to_virt(m) (__va(mfn_to_pfn(m) << PAGE_SHIFT)) #define pte_mfn pte_pfn #define mfn_pte pfn_pte diff --git a/arch/arm/include/debug/8250.S b/arch/arm/include/debug/8250.S index 7a2baf913..7f7446f6f 100644 --- a/arch/arm/include/debug/8250.S +++ b/arch/arm/include/debug/8250.S @@ -16,11 +16,14 @@ #ifdef CONFIG_DEBUG_UART_8250_WORD .macro store, rd, rx:vararg + ARM_BE8(rev \rd, \rd) str \rd, \rx + ARM_BE8(rev \rd, \rd) .endm .macro load, rd, rx:vararg ldr \rd, \rx + ARM_BE8(rev \rd, \rd) .endm #else .macro store, rd, rx:vararg diff --git a/arch/arm/include/debug/efm32.S b/arch/arm/include/debug/efm32.S index 2265a1992..660fa1e4b 100644 --- a/arch/arm/include/debug/efm32.S +++ b/arch/arm/include/debug/efm32.S @@ -16,7 +16,7 @@ #define UARTn_TXDATA 0x0034 - .macro addruart, rx, tmp + .macro addruart, rx, tmp, tmp2 ldr \rx, =(CONFIG_DEBUG_UART_PHYS) /* diff --git a/arch/arm/include/debug/imx-uart.h b/arch/arm/include/debug/imx-uart.h index 032a316eb..66f736f74 100644 --- a/arch/arm/include/debug/imx-uart.h +++ b/arch/arm/include/debug/imx-uart.h @@ -1,5 +1,5 @@ /* - * Copyright (C) 2012 Freescale Semiconductor, Inc. + * Copyright (C) 2012-2015 Freescale Semiconductor, Inc. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as @@ -90,6 +90,16 @@ #define IMX6SX_UART_BASE_ADDR(n) IMX6SX_UART##n##_BASE_ADDR #define IMX6SX_UART_BASE(n) IMX6SX_UART_BASE_ADDR(n) +#define IMX7D_UART1_BASE_ADDR 0x30860000 +#define IMX7D_UART2_BASE_ADDR 0x30890000 +#define IMX7D_UART3_BASE_ADDR 0x30880000 +#define IMX7D_UART4_BASE_ADDR 0x30a60000 +#define IMX7D_UART5_BASE_ADDR 0x30a70000 +#define IMX7D_UART6_BASE_ADDR 0x30a80000 +#define IMX7D_UART7_BASE_ADDR 0x30a90000 +#define IMX7D_UART_BASE_ADDR(n) IMX7D_UART##n##_BASE_ADDR +#define IMX7D_UART_BASE(n) IMX7D_UART_BASE_ADDR(n) + #define IMX_DEBUG_UART_BASE(soc) soc##_UART_BASE(CONFIG_DEBUG_IMX_UART_PORT) #ifdef CONFIG_DEBUG_IMX1_UART @@ -114,6 +124,9 @@ #define UART_PADDR IMX_DEBUG_UART_BASE(IMX6SL) #elif defined(CONFIG_DEBUG_IMX6SX_UART) #define UART_PADDR IMX_DEBUG_UART_BASE(IMX6SX) +#elif defined(CONFIG_DEBUG_IMX7D_UART) +#define UART_PADDR IMX_DEBUG_UART_BASE(IMX7D) + #endif #endif /* __DEBUG_IMX_UART_H */ diff --git a/arch/arm/include/debug/pl01x.S b/arch/arm/include/debug/pl01x.S index 92ef808a2..f7d8323ce 100644 --- a/arch/arm/include/debug/pl01x.S +++ b/arch/arm/include/debug/pl01x.S @@ -12,6 +12,13 @@ */ #include <linux/amba/serial.h> +#ifdef CONFIG_DEBUG_ZTE_ZX +#undef UART01x_DR +#undef UART01x_FR +#define UART01x_DR 0x04 +#define UART01x_FR 0x14 +#endif + #ifdef CONFIG_DEBUG_UART_PHYS .macro addruart, rp, rv, tmp ldr \rp, =CONFIG_DEBUG_UART_PHYS diff --git a/arch/arm/kernel/Makefile b/arch/arm/kernel/Makefile index 752725dcb..e69f7a197 100644 --- a/arch/arm/kernel/Makefile +++ b/arch/arm/kernel/Makefile @@ -34,6 +34,7 @@ obj-$(CONFIG_CPU_IDLE) += cpuidle.o obj-$(CONFIG_ISA_DMA_API) += dma.o obj-$(CONFIG_FIQ) += fiq.o fiqasm.o obj-$(CONFIG_MODULES) += armksyms.o module.o +obj-$(CONFIG_ARM_MODULE_PLTS) += module-plts.o obj-$(CONFIG_ISA_DMA) += dma-isa.o obj-$(CONFIG_PCI) += bios32.o isa.o obj-$(CONFIG_ARM_CPU_SUSPEND) += sleep.o suspend.o @@ -70,7 +71,9 @@ obj-$(CONFIG_CPU_PJ4) += pj4-cp0.o obj-$(CONFIG_CPU_PJ4B) += pj4-cp0.o obj-$(CONFIG_IWMMXT) += iwmmxt.o obj-$(CONFIG_PERF_EVENTS) += perf_regs.o perf_callchain.o -obj-$(CONFIG_HW_PERF_EVENTS) += perf_event.o perf_event_cpu.o +obj-$(CONFIG_HW_PERF_EVENTS) += perf_event.o \ + perf_event_xscale.o perf_event_v6.o \ + perf_event_v7.o CFLAGS_pj4-cp0.o := -marm AFLAGS_iwmmxt.o := -Wa,-mcpu=iwmmxt obj-$(CONFIG_ARM_CPU_TOPOLOGY) += topology.o diff --git a/arch/arm/kernel/armksyms.c b/arch/arm/kernel/armksyms.c index a88671cfe..5e5a51a99 100644 --- a/arch/arm/kernel/armksyms.c +++ b/arch/arm/kernel/armksyms.c @@ -50,6 +50,9 @@ extern void __aeabi_ulcmp(void); extern void fpundefinstr(void); +void mmioset(void *, unsigned int, size_t); +void mmiocpy(void *, const void *, size_t); + /* platform dependent support */ EXPORT_SYMBOL(arm_delay_ops); @@ -88,6 +91,9 @@ EXPORT_SYMBOL(memmove); EXPORT_SYMBOL(memchr); EXPORT_SYMBOL(__memzero); +EXPORT_SYMBOL(mmioset); +EXPORT_SYMBOL(mmiocpy); + #ifdef CONFIG_MMU EXPORT_SYMBOL(copy_page); diff --git a/arch/arm/kernel/debug.S b/arch/arm/kernel/debug.S index 78c91b5f9..ea9646cc2 100644 --- a/arch/arm/kernel/debug.S +++ b/arch/arm/kernel/debug.S @@ -35,7 +35,7 @@ #else /* !CONFIG_MMU */ .macro addruart_current, rx, tmp1, tmp2 - addruart \rx, \tmp1 + addruart \rx, \tmp1, \tmp2 .endm #endif /* CONFIG_MMU */ diff --git a/arch/arm/kernel/entry-armv.S b/arch/arm/kernel/entry-armv.S index 570306c49..cb4fb1e69 100644 --- a/arch/arm/kernel/entry-armv.S +++ b/arch/arm/kernel/entry-armv.S @@ -15,6 +15,8 @@ * that causes it to save wrong values... Be aware! */ +#include <linux/init.h> + #include <asm/assembler.h> #include <asm/memory.h> #include <asm/glue-df.h> @@ -40,7 +42,7 @@ #ifdef CONFIG_MULTI_IRQ_HANDLER ldr r1, =handle_arch_irq mov r0, sp - adr lr, BSYM(9997f) + badr lr, 9997f ldr pc, [r1] #else arch_irq_handler_default @@ -273,7 +275,7 @@ __und_svc: str r4, [sp, #S_PC] orr r0, r9, r0, lsl #16 #endif - adr r9, BSYM(__und_svc_finish) + badr r9, __und_svc_finish mov r2, r4 bl call_fpe @@ -408,7 +410,7 @@ ENDPROC(__fiq_abt) zero_fp .if \trace -#ifdef CONFIG_IRQSOFF_TRACER +#ifdef CONFIG_TRACE_IRQFLAGS bl trace_hardirqs_off #endif ct_user_exit save = 0 @@ -469,7 +471,7 @@ __und_usr: @ instruction, or the more conventional lr if we are to treat @ this as a real undefined instruction @ - adr r9, BSYM(ret_from_exception) + badr r9, ret_from_exception @ IRQs must be enabled before attempting to read the instruction from @ user space since that could cause a page/translation fault if the @@ -486,7 +488,7 @@ __und_usr: @ r2 = PC value for the following instruction (:= regs->ARM_pc) @ r4 = PC value for the faulting instruction @ lr = 32-bit undefined instruction function - adr lr, BSYM(__und_usr_fault_32) + badr lr, __und_usr_fault_32 b call_fpe __und_usr_thumb: @@ -522,7 +524,7 @@ ARM_BE8(rev16 r0, r0) @ little endian instruction add r2, r2, #2 @ r2 is PC + 2, make it PC + 4 str r2, [sp, #S_PC] @ it's a 2x16bit instr, update orr r0, r0, r5, lsl #16 - adr lr, BSYM(__und_usr_fault_32) + badr lr, __und_usr_fault_32 @ r0 = the two 16-bit Thumb instructions which caused the exception @ r2 = PC value for the following Thumb instruction (:= regs->ARM_pc) @ r4 = PC value for the first 16-bit Thumb instruction @@ -716,7 +718,7 @@ __und_usr_fault_32: __und_usr_fault_16: mov r1, #2 1: mov r0, sp - adr lr, BSYM(ret_from_exception) + badr lr, ret_from_exception b __und_fault ENDPROC(__und_usr_fault_32) ENDPROC(__und_usr_fault_16) diff --git a/arch/arm/kernel/entry-common.S b/arch/arm/kernel/entry-common.S index 4e7f40c57..b48dd4f37 100644 --- a/arch/arm/kernel/entry-common.S +++ b/arch/arm/kernel/entry-common.S @@ -61,6 +61,7 @@ work_pending: movlt scno, #(__NR_restart_syscall - __NR_SYSCALL_BASE) ldmia sp, {r0 - r6} @ have to reload r0 - r6 b local_restart @ ... and off we go +ENDPROC(ret_fast_syscall) /* * "slow" syscall return path. "why" tells us if this was a real syscall. @@ -90,7 +91,7 @@ ENTRY(ret_from_fork) bl schedule_tail cmp r5, #0 movne r0, r4 - adrne lr, BSYM(1f) + badrne lr, 1f retne r5 1: get_thread_info tsk b ret_slow_syscall @@ -198,7 +199,7 @@ local_restart: bne __sys_trace cmp scno, #NR_syscalls @ check upper syscall limit - adr lr, BSYM(ret_fast_syscall) @ return address + badr lr, ret_fast_syscall @ return address ldrcc pc, [tbl, scno, lsl #2] @ call sys_* routine add r1, sp, #S_OFF @@ -233,7 +234,7 @@ __sys_trace: add r0, sp, #S_OFF bl syscall_trace_enter - adr lr, BSYM(__sys_trace_return) @ return address + badr lr, __sys_trace_return @ return address mov scno, r0 @ syscall number (possibly new) add r1, sp, #S_R0 + S_OFF @ pointer to regs cmp scno, #NR_syscalls @ check upper syscall limit diff --git a/arch/arm/kernel/entry-ftrace.S b/arch/arm/kernel/entry-ftrace.S index fe57c73e7..c73c4030c 100644 --- a/arch/arm/kernel/entry-ftrace.S +++ b/arch/arm/kernel/entry-ftrace.S @@ -87,7 +87,7 @@ 1: mcount_get_lr r1 @ lr of instrumented func mcount_adjust_addr r0, lr @ instrumented function - adr lr, BSYM(2f) + badr lr, 2f mov pc, r2 2: mcount_exit .endm diff --git a/arch/arm/kernel/entry-v7m.S b/arch/arm/kernel/entry-v7m.S index 8944f4991..b6c8bb931 100644 --- a/arch/arm/kernel/entry-v7m.S +++ b/arch/arm/kernel/entry-v7m.S @@ -117,9 +117,14 @@ ENTRY(__switch_to) ENDPROC(__switch_to) .data - .align 8 +#if CONFIG_CPU_V7M_NUM_IRQ <= 112 + .align 9 +#else + .align 10 +#endif + /* - * Vector table (64 words => 256 bytes natural alignment) + * Vector table (Natural alignment need to be ensured) */ ENTRY(vector_table) .long 0 @ 0 - Reset stack pointer @@ -138,6 +143,6 @@ ENTRY(vector_table) .long __invalid_entry @ 13 - Reserved .long __pendsv_entry @ 14 - PendSV .long __invalid_entry @ 15 - SysTick - .rept 64 - 16 - .long __irq_entry @ 16..64 - External Interrupts + .rept CONFIG_CPU_V7M_NUM_IRQ + .long __irq_entry @ External Interrupts .endr diff --git a/arch/arm/kernel/head-nommu.S b/arch/arm/kernel/head-nommu.S index aebfbf79a..9b8c5a113 100644 --- a/arch/arm/kernel/head-nommu.S +++ b/arch/arm/kernel/head-nommu.S @@ -46,7 +46,7 @@ ENTRY(stext) .arm ENTRY(stext) - THUMB( adr r9, BSYM(1f) ) @ Kernel is always entered in ARM. + THUMB( badr r9, 1f ) @ Kernel is always entered in ARM. THUMB( bx r9 ) @ If this is a Thumb-2 kernel, THUMB( .thumb ) @ switch to Thumb now. THUMB(1: ) @@ -77,13 +77,13 @@ ENTRY(stext) orr r6, r6, #(1 << MPU_RSR_EN) @ Set region enabled bit bl __setup_mpu #endif - ldr r13, =__mmap_switched @ address to jump to after - @ initialising sctlr - adr lr, BSYM(1f) @ return (PIC) address + + badr lr, 1f @ return (PIC) address ldr r12, [r10, #PROCINFO_INITFUNC] add r12, r12, r10 ret r12 - 1: b __after_proc_init +1: bl __after_proc_init + b __mmap_switched ENDPROC(stext) #ifdef CONFIG_SMP @@ -106,8 +106,7 @@ ENTRY(secondary_startup) movs r10, r5 @ invalid processor? beq __error_p @ yes, error 'p' - adr r4, __secondary_data - ldmia r4, {r7, r12} + ldr r7, __secondary_data #ifdef CONFIG_ARM_MPU /* Use MPU region info supplied by __cpu_up */ @@ -115,23 +114,19 @@ ENTRY(secondary_startup) bl __setup_mpu @ Initialize the MPU #endif - adr lr, BSYM(__after_proc_init) @ return address - mov r13, r12 @ __secondary_switched address + badr lr, 1f @ return (PIC) address ldr r12, [r10, #PROCINFO_INITFUNC] add r12, r12, r10 ret r12 -ENDPROC(secondary_startup) - -ENTRY(__secondary_switched) - ldr sp, [r7, #8] @ set up the stack pointer +1: bl __after_proc_init + ldr sp, [r7, #12] @ set up the stack pointer mov fp, #0 b secondary_start_kernel -ENDPROC(__secondary_switched) +ENDPROC(secondary_startup) .type __secondary_data, %object __secondary_data: .long secondary_data - .long __secondary_switched #endif /* CONFIG_SMP */ /* @@ -164,7 +159,7 @@ __after_proc_init: #endif mcr p15, 0, r0, c1, c0, 0 @ write control reg #endif /* CONFIG_CPU_CP15 */ - ret r13 + ret lr ENDPROC(__after_proc_init) .ltorg diff --git a/arch/arm/kernel/head.S b/arch/arm/kernel/head.S index 3637973a9..29e299146 100644 --- a/arch/arm/kernel/head.S +++ b/arch/arm/kernel/head.S @@ -80,7 +80,7 @@ ENTRY(stext) ARM_BE8(setend be ) @ ensure we are in BE8 mode - THUMB( adr r9, BSYM(1f) ) @ Kernel is always entered in ARM. + THUMB( badr r9, 1f ) @ Kernel is always entered in ARM. THUMB( bx r9 ) @ If this is a Thumb-2 kernel, THUMB( .thumb ) @ switch to Thumb now. THUMB(1: ) @@ -131,13 +131,30 @@ ENTRY(stext) * The following calls CPU specific code in a position independent * manner. See arch/arm/mm/proc-*.S for details. r10 = base of * xxx_proc_info structure selected by __lookup_processor_type - * above. On return, the CPU will be ready for the MMU to be - * turned on, and r0 will hold the CPU control register value. + * above. + * + * The processor init function will be called with: + * r1 - machine type + * r2 - boot data (atags/dt) pointer + * r4 - translation table base (low word) + * r5 - translation table base (high word, if LPAE) + * r8 - translation table base 1 (pfn if LPAE) + * r9 - cpuid + * r13 - virtual address for __enable_mmu -> __turn_mmu_on + * + * On return, the CPU will be ready for the MMU to be turned on, + * r0 will hold the CPU control register value, r1, r2, r4, and + * r9 will be preserved. r5 will also be preserved if LPAE. */ ldr r13, =__mmap_switched @ address to jump to after @ mmu has been enabled - adr lr, BSYM(1f) @ return (PIC) address + badr lr, 1f @ return (PIC) address +#ifdef CONFIG_ARM_LPAE + mov r5, #0 @ high TTBR0 + mov r8, r4, lsr #12 @ TTBR1 is swapper_pg_dir pfn +#else mov r8, r4 @ set TTBR1 to swapper_pg_dir +#endif ldr r12, [r10, #PROCINFO_INITFUNC] add r12, r12, r10 ret r12 @@ -158,7 +175,7 @@ ENDPROC(stext) * * Returns: * r0, r3, r5-r7 corrupted - * r4 = page table (see ARCH_PGD_SHIFT in asm/memory.h) + * r4 = physical page table address */ __create_page_tables: pgtbl r4, r8 @ page table address @@ -333,7 +350,6 @@ __create_page_tables: #endif #ifdef CONFIG_ARM_LPAE sub r4, r4, #0x1000 @ point to the PGD table - mov r4, r4, lsr #ARCH_PGD_SHIFT #endif ret lr ENDPROC(__create_page_tables) @@ -346,9 +362,9 @@ __turn_mmu_on_loc: #if defined(CONFIG_SMP) .text -ENTRY(secondary_startup_arm) .arm - THUMB( adr r9, BSYM(1f) ) @ Kernel is entered in ARM. +ENTRY(secondary_startup_arm) + THUMB( badr r9, 1f ) @ Kernel is entered in ARM. THUMB( bx r9 ) @ If this is a Thumb-2 kernel, THUMB( .thumb ) @ switch to Thumb now. THUMB(1: ) @@ -381,10 +397,13 @@ ENTRY(secondary_startup) adr r4, __secondary_data ldmia r4, {r5, r7, r12} @ address to jump to after sub lr, r4, r5 @ mmu has been enabled - ldr r4, [r7, lr] @ get secondary_data.pgdir - add r7, r7, #4 - ldr r8, [r7, lr] @ get secondary_data.swapper_pg_dir - adr lr, BSYM(__enable_mmu) @ return address + add r3, r7, lr + ldrd r4, [r3, #0] @ get secondary_data.pgdir +ARM_BE8(eor r4, r4, r5) @ Swap r5 and r4 in BE: +ARM_BE8(eor r5, r4, r5) @ it can be done in 3 steps +ARM_BE8(eor r4, r4, r5) @ without using a temp reg. + ldr r8, [r3, #8] @ get secondary_data.swapper_pg_dir + badr lr, __enable_mmu @ return address mov r13, r12 @ __secondary_switched address ldr r12, [r10, #PROCINFO_INITFUNC] add r12, r12, r10 @ initialise processor @@ -397,7 +416,7 @@ ENDPROC(secondary_startup_arm) * r6 = &secondary_data */ ENTRY(__secondary_switched) - ldr sp, [r7, #4] @ get secondary_data.stack + ldr sp, [r7, #12] @ get secondary_data.stack mov fp, #0 b secondary_start_kernel ENDPROC(__secondary_switched) @@ -416,12 +435,14 @@ __secondary_data: /* * Setup common bits before finally enabling the MMU. Essentially * this is just loading the page table pointer and domain access - * registers. + * registers. All these registers need to be preserved by the + * processor setup function (or set in the case of r0) * * r0 = cp#15 control register * r1 = machine ID * r2 = atags or dtb pointer - * r4 = page table (see ARCH_PGD_SHIFT in asm/memory.h) + * r4 = TTBR pointer (low word) + * r5 = TTBR pointer (high word if LPAE) * r9 = processor ID * r13 = *virtual* address to jump to upon completion */ @@ -440,7 +461,9 @@ __enable_mmu: #ifdef CONFIG_CPU_ICACHE_DISABLE bic r0, r0, #CR_I #endif -#ifndef CONFIG_ARM_LPAE +#ifdef CONFIG_ARM_LPAE + mcrr p15, 0, r4, r5, c2 @ load TTBR0 +#else mov r5, #(domain_val(DOMAIN_USER, DOMAIN_MANAGER) | \ domain_val(DOMAIN_KERNEL, DOMAIN_MANAGER) | \ domain_val(DOMAIN_TABLE, DOMAIN_MANAGER) | \ diff --git a/arch/arm/kernel/module-plts.c b/arch/arm/kernel/module-plts.c new file mode 100644 index 000000000..097e2e201 --- /dev/null +++ b/arch/arm/kernel/module-plts.c @@ -0,0 +1,183 @@ +/* + * Copyright (C) 2014 Linaro Ltd. <ard.biesheuvel@linaro.org> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/elf.h> +#include <linux/kernel.h> +#include <linux/module.h> + +#include <asm/cache.h> +#include <asm/opcodes.h> + +#define PLT_ENT_STRIDE L1_CACHE_BYTES +#define PLT_ENT_COUNT (PLT_ENT_STRIDE / sizeof(u32)) +#define PLT_ENT_SIZE (sizeof(struct plt_entries) / PLT_ENT_COUNT) + +#ifdef CONFIG_THUMB2_KERNEL +#define PLT_ENT_LDR __opcode_to_mem_thumb32(0xf8dff000 | \ + (PLT_ENT_STRIDE - 4)) +#else +#define PLT_ENT_LDR __opcode_to_mem_arm(0xe59ff000 | \ + (PLT_ENT_STRIDE - 8)) +#endif + +struct plt_entries { + u32 ldr[PLT_ENT_COUNT]; + u32 lit[PLT_ENT_COUNT]; +}; + +static bool in_init(const struct module *mod, u32 addr) +{ + return addr - (u32)mod->module_init < mod->init_size; +} + +u32 get_module_plt(struct module *mod, unsigned long loc, Elf32_Addr val) +{ + struct plt_entries *plt, *plt_end; + int c, *count; + + if (in_init(mod, loc)) { + plt = (void *)mod->arch.init_plt->sh_addr; + plt_end = (void *)plt + mod->arch.init_plt->sh_size; + count = &mod->arch.init_plt_count; + } else { + plt = (void *)mod->arch.core_plt->sh_addr; + plt_end = (void *)plt + mod->arch.core_plt->sh_size; + count = &mod->arch.core_plt_count; + } + + /* Look for an existing entry pointing to 'val' */ + for (c = *count; plt < plt_end; c -= PLT_ENT_COUNT, plt++) { + int i; + + if (!c) { + /* Populate a new set of entries */ + *plt = (struct plt_entries){ + { [0 ... PLT_ENT_COUNT - 1] = PLT_ENT_LDR, }, + { val, } + }; + ++*count; + return (u32)plt->ldr; + } + for (i = 0; i < PLT_ENT_COUNT; i++) { + if (!plt->lit[i]) { + plt->lit[i] = val; + ++*count; + } + if (plt->lit[i] == val) + return (u32)&plt->ldr[i]; + } + } + BUG(); +} + +static int duplicate_rel(Elf32_Addr base, const Elf32_Rel *rel, int num, + u32 mask) +{ + u32 *loc1, *loc2; + int i; + + for (i = 0; i < num; i++) { + if (rel[i].r_info != rel[num].r_info) + continue; + + /* + * Identical relocation types against identical symbols can + * still result in different PLT entries if the addend in the + * place is different. So resolve the target of the relocation + * to compare the values. + */ + loc1 = (u32 *)(base + rel[i].r_offset); + loc2 = (u32 *)(base + rel[num].r_offset); + if (((*loc1 ^ *loc2) & mask) == 0) + return 1; + } + return 0; +} + +/* Count how many PLT entries we may need */ +static unsigned int count_plts(Elf32_Addr base, const Elf32_Rel *rel, int num) +{ + unsigned int ret = 0; + int i; + + /* + * Sure, this is order(n^2), but it's usually short, and not + * time critical + */ + for (i = 0; i < num; i++) + switch (ELF32_R_TYPE(rel[i].r_info)) { + case R_ARM_CALL: + case R_ARM_PC24: + case R_ARM_JUMP24: + if (!duplicate_rel(base, rel, i, + __opcode_to_mem_arm(0x00ffffff))) + ret++; + break; +#ifdef CONFIG_THUMB2_KERNEL + case R_ARM_THM_CALL: + case R_ARM_THM_JUMP24: + if (!duplicate_rel(base, rel, i, + __opcode_to_mem_thumb32(0x07ff2fff))) + ret++; +#endif + } + return ret; +} + +int module_frob_arch_sections(Elf_Ehdr *ehdr, Elf_Shdr *sechdrs, + char *secstrings, struct module *mod) +{ + unsigned long core_plts = 0, init_plts = 0; + Elf32_Shdr *s, *sechdrs_end = sechdrs + ehdr->e_shnum; + + /* + * To store the PLTs, we expand the .text section for core module code + * and the .init.text section for initialization code. + */ + for (s = sechdrs; s < sechdrs_end; ++s) + if (strcmp(".core.plt", secstrings + s->sh_name) == 0) + mod->arch.core_plt = s; + else if (strcmp(".init.plt", secstrings + s->sh_name) == 0) + mod->arch.init_plt = s; + + if (!mod->arch.core_plt || !mod->arch.init_plt) { + pr_err("%s: sections missing\n", mod->name); + return -ENOEXEC; + } + + for (s = sechdrs + 1; s < sechdrs_end; ++s) { + const Elf32_Rel *rels = (void *)ehdr + s->sh_offset; + int numrels = s->sh_size / sizeof(Elf32_Rel); + Elf32_Shdr *dstsec = sechdrs + s->sh_info; + + if (s->sh_type != SHT_REL) + continue; + + if (strstr(secstrings + s->sh_name, ".init")) + init_plts += count_plts(dstsec->sh_addr, rels, numrels); + else + core_plts += count_plts(dstsec->sh_addr, rels, numrels); + } + + mod->arch.core_plt->sh_type = SHT_NOBITS; + mod->arch.core_plt->sh_flags = SHF_EXECINSTR | SHF_ALLOC; + mod->arch.core_plt->sh_addralign = L1_CACHE_BYTES; + mod->arch.core_plt->sh_size = round_up(core_plts * PLT_ENT_SIZE, + sizeof(struct plt_entries)); + mod->arch.core_plt_count = 0; + + mod->arch.init_plt->sh_type = SHT_NOBITS; + mod->arch.init_plt->sh_flags = SHF_EXECINSTR | SHF_ALLOC; + mod->arch.init_plt->sh_addralign = L1_CACHE_BYTES; + mod->arch.init_plt->sh_size = round_up(init_plts * PLT_ENT_SIZE, + sizeof(struct plt_entries)); + mod->arch.init_plt_count = 0; + pr_debug("%s: core.plt=%x, init.plt=%x\n", __func__, + mod->arch.core_plt->sh_size, mod->arch.init_plt->sh_size); + return 0; +} diff --git a/arch/arm/kernel/module.c b/arch/arm/kernel/module.c index af791f4a6..efdddcb97 100644 --- a/arch/arm/kernel/module.c +++ b/arch/arm/kernel/module.c @@ -40,7 +40,12 @@ #ifdef CONFIG_MMU void *module_alloc(unsigned long size) { - return __vmalloc_node_range(size, 1, MODULES_VADDR, MODULES_END, + void *p = __vmalloc_node_range(size, 1, MODULES_VADDR, MODULES_END, + GFP_KERNEL, PAGE_KERNEL_EXEC, 0, NUMA_NO_NODE, + __builtin_return_address(0)); + if (!IS_ENABLED(CONFIG_ARM_MODULE_PLTS) || p) + return p; + return __vmalloc_node_range(size, 1, VMALLOC_START, VMALLOC_END, GFP_KERNEL, PAGE_KERNEL_EXEC, 0, NUMA_NO_NODE, __builtin_return_address(0)); } @@ -110,6 +115,20 @@ apply_relocate(Elf32_Shdr *sechdrs, const char *strtab, unsigned int symindex, offset -= 0x04000000; offset += sym->st_value - loc; + + /* + * Route through a PLT entry if 'offset' exceeds the + * supported range. Note that 'offset + loc + 8' + * contains the absolute jump target, i.e., + * @sym + addend, corrected for the +8 PC bias. + */ + if (IS_ENABLED(CONFIG_ARM_MODULE_PLTS) && + (offset <= (s32)0xfe000000 || + offset >= (s32)0x02000000)) + offset = get_module_plt(module, loc, + offset + loc + 8) + - loc - 8; + if (offset <= (s32)0xfe000000 || offset >= (s32)0x02000000) { pr_err("%s: section %u reloc %u sym '%s': relocation %u out of range (%#lx -> %#x)\n", @@ -203,6 +222,17 @@ apply_relocate(Elf32_Shdr *sechdrs, const char *strtab, unsigned int symindex, offset -= 0x02000000; offset += sym->st_value - loc; + /* + * Route through a PLT entry if 'offset' exceeds the + * supported range. + */ + if (IS_ENABLED(CONFIG_ARM_MODULE_PLTS) && + (offset <= (s32)0xff000000 || + offset >= (s32)0x01000000)) + offset = get_module_plt(module, loc, + offset + loc + 4) + - loc - 4; + if (offset <= (s32)0xff000000 || offset >= (s32)0x01000000) { pr_err("%s: section %u reloc %u sym '%s': relocation %u out of range (%#lx -> %#x)\n", diff --git a/arch/arm/kernel/module.lds b/arch/arm/kernel/module.lds new file mode 100644 index 000000000..3682fa107 --- /dev/null +++ b/arch/arm/kernel/module.lds @@ -0,0 +1,4 @@ +SECTIONS { + .core.plt : { BYTE(0) } + .init.plt : { BYTE(0) } +} diff --git a/arch/arm/kernel/perf_event.c b/arch/arm/kernel/perf_event.c index 4a86a0133..54272e0be 100644 --- a/arch/arm/kernel/perf_event.c +++ b/arch/arm/kernel/perf_event.c @@ -11,12 +11,18 @@ */ #define pr_fmt(fmt) "hw perfevents: " fmt +#include <linux/bitmap.h> +#include <linux/cpumask.h> +#include <linux/export.h> #include <linux/kernel.h> +#include <linux/of.h> #include <linux/platform_device.h> -#include <linux/pm_runtime.h> +#include <linux/slab.h> +#include <linux/spinlock.h> #include <linux/irq.h> #include <linux/irqdesc.h> +#include <asm/cputype.h> #include <asm/irq_regs.h> #include <asm/pmu.h> @@ -229,6 +235,10 @@ armpmu_add(struct perf_event *event, int flags) int idx; int err = 0; + /* An event following a process won't be stopped earlier */ + if (!cpumask_test_cpu(smp_processor_id(), &armpmu->supported_cpus)) + return -ENOENT; + perf_pmu_disable(event->pmu); /* If we don't have a space for the counter then finish early. */ @@ -344,20 +354,12 @@ static void armpmu_release_hardware(struct arm_pmu *armpmu) { armpmu->free_irq(armpmu); - pm_runtime_put_sync(&armpmu->plat_device->dev); } static int armpmu_reserve_hardware(struct arm_pmu *armpmu) { - int err; - struct platform_device *pmu_device = armpmu->plat_device; - - if (!pmu_device) - return -ENODEV; - - pm_runtime_get_sync(&pmu_device->dev); - err = armpmu->request_irq(armpmu, armpmu_dispatch_irq); + int err = armpmu->request_irq(armpmu, armpmu_dispatch_irq); if (err) { armpmu_release_hardware(armpmu); return err; @@ -454,6 +456,17 @@ static int armpmu_event_init(struct perf_event *event) int err = 0; atomic_t *active_events = &armpmu->active_events; + /* + * Reject CPU-affine events for CPUs that are of a different class to + * that which this PMU handles. Process-following events (where + * event->cpu == -1) can be migrated between CPUs, and thus we have to + * reject them later (in armpmu_add) if they're scheduled on a + * different class of CPU. + */ + if (event->cpu != -1 && + !cpumask_test_cpu(event->cpu, &armpmu->supported_cpus)) + return -ENOENT; + /* does not support taken branch sampling */ if (has_branch_stack(event)) return -EOPNOTSUPP; @@ -489,6 +502,10 @@ static void armpmu_enable(struct pmu *pmu) struct pmu_hw_events *hw_events = this_cpu_ptr(armpmu->hw_events); int enabled = bitmap_weight(hw_events->used_mask, armpmu->num_events); + /* For task-bound events we may be called on other CPUs */ + if (!cpumask_test_cpu(smp_processor_id(), &armpmu->supported_cpus)) + return; + if (enabled) armpmu->start(armpmu); } @@ -496,34 +513,25 @@ static void armpmu_enable(struct pmu *pmu) static void armpmu_disable(struct pmu *pmu) { struct arm_pmu *armpmu = to_arm_pmu(pmu); - armpmu->stop(armpmu); -} - -#ifdef CONFIG_PM -static int armpmu_runtime_resume(struct device *dev) -{ - struct arm_pmu_platdata *plat = dev_get_platdata(dev); - if (plat && plat->runtime_resume) - return plat->runtime_resume(dev); + /* For task-bound events we may be called on other CPUs */ + if (!cpumask_test_cpu(smp_processor_id(), &armpmu->supported_cpus)) + return; - return 0; + armpmu->stop(armpmu); } -static int armpmu_runtime_suspend(struct device *dev) +/* + * In heterogeneous systems, events are specific to a particular + * microarchitecture, and aren't suitable for another. Thus, only match CPUs of + * the same microarchitecture. + */ +static int armpmu_filter_match(struct perf_event *event) { - struct arm_pmu_platdata *plat = dev_get_platdata(dev); - - if (plat && plat->runtime_suspend) - return plat->runtime_suspend(dev); - - return 0; + struct arm_pmu *armpmu = to_arm_pmu(event->pmu); + unsigned int cpu = smp_processor_id(); + return cpumask_test_cpu(cpu, &armpmu->supported_cpus); } -#endif - -const struct dev_pm_ops armpmu_dev_pm_ops = { - SET_RUNTIME_PM_OPS(armpmu_runtime_suspend, armpmu_runtime_resume, NULL) -}; static void armpmu_init(struct arm_pmu *armpmu) { @@ -539,15 +547,350 @@ static void armpmu_init(struct arm_pmu *armpmu) .start = armpmu_start, .stop = armpmu_stop, .read = armpmu_read, + .filter_match = armpmu_filter_match, }; } int armpmu_register(struct arm_pmu *armpmu, int type) { armpmu_init(armpmu); - pm_runtime_enable(&armpmu->plat_device->dev); pr_info("enabled with %s PMU driver, %d counters available\n", armpmu->name, armpmu->num_events); return perf_pmu_register(&armpmu->pmu, armpmu->name, type); } +/* Set at runtime when we know what CPU type we are. */ +static struct arm_pmu *__oprofile_cpu_pmu; + +/* + * Despite the names, these two functions are CPU-specific and are used + * by the OProfile/perf code. + */ +const char *perf_pmu_name(void) +{ + if (!__oprofile_cpu_pmu) + return NULL; + + return __oprofile_cpu_pmu->name; +} +EXPORT_SYMBOL_GPL(perf_pmu_name); + +int perf_num_counters(void) +{ + int max_events = 0; + + if (__oprofile_cpu_pmu != NULL) + max_events = __oprofile_cpu_pmu->num_events; + + return max_events; +} +EXPORT_SYMBOL_GPL(perf_num_counters); + +static void cpu_pmu_enable_percpu_irq(void *data) +{ + int irq = *(int *)data; + + enable_percpu_irq(irq, IRQ_TYPE_NONE); +} + +static void cpu_pmu_disable_percpu_irq(void *data) +{ + int irq = *(int *)data; + + disable_percpu_irq(irq); +} + +static void cpu_pmu_free_irq(struct arm_pmu *cpu_pmu) +{ + int i, irq, irqs; + struct platform_device *pmu_device = cpu_pmu->plat_device; + struct pmu_hw_events __percpu *hw_events = cpu_pmu->hw_events; + + irqs = min(pmu_device->num_resources, num_possible_cpus()); + + irq = platform_get_irq(pmu_device, 0); + if (irq >= 0 && irq_is_percpu(irq)) { + on_each_cpu(cpu_pmu_disable_percpu_irq, &irq, 1); + free_percpu_irq(irq, &hw_events->percpu_pmu); + } else { + for (i = 0; i < irqs; ++i) { + int cpu = i; + + if (cpu_pmu->irq_affinity) + cpu = cpu_pmu->irq_affinity[i]; + + if (!cpumask_test_and_clear_cpu(cpu, &cpu_pmu->active_irqs)) + continue; + irq = platform_get_irq(pmu_device, i); + if (irq >= 0) + free_irq(irq, per_cpu_ptr(&hw_events->percpu_pmu, cpu)); + } + } +} + +static int cpu_pmu_request_irq(struct arm_pmu *cpu_pmu, irq_handler_t handler) +{ + int i, err, irq, irqs; + struct platform_device *pmu_device = cpu_pmu->plat_device; + struct pmu_hw_events __percpu *hw_events = cpu_pmu->hw_events; + + if (!pmu_device) + return -ENODEV; + + irqs = min(pmu_device->num_resources, num_possible_cpus()); + if (irqs < 1) { + pr_warn_once("perf/ARM: No irqs for PMU defined, sampling events not supported\n"); + return 0; + } + + irq = platform_get_irq(pmu_device, 0); + if (irq >= 0 && irq_is_percpu(irq)) { + err = request_percpu_irq(irq, handler, "arm-pmu", + &hw_events->percpu_pmu); + if (err) { + pr_err("unable to request IRQ%d for ARM PMU counters\n", + irq); + return err; + } + on_each_cpu(cpu_pmu_enable_percpu_irq, &irq, 1); + } else { + for (i = 0; i < irqs; ++i) { + int cpu = i; + + err = 0; + irq = platform_get_irq(pmu_device, i); + if (irq < 0) + continue; + + if (cpu_pmu->irq_affinity) + cpu = cpu_pmu->irq_affinity[i]; + + /* + * If we have a single PMU interrupt that we can't shift, + * assume that we're running on a uniprocessor machine and + * continue. Otherwise, continue without this interrupt. + */ + if (irq_set_affinity(irq, cpumask_of(cpu)) && irqs > 1) { + pr_warn("unable to set irq affinity (irq=%d, cpu=%u)\n", + irq, cpu); + continue; + } + + err = request_irq(irq, handler, + IRQF_NOBALANCING | IRQF_NO_THREAD, "arm-pmu", + per_cpu_ptr(&hw_events->percpu_pmu, cpu)); + if (err) { + pr_err("unable to request IRQ%d for ARM PMU counters\n", + irq); + return err; + } + + cpumask_set_cpu(cpu, &cpu_pmu->active_irqs); + } + } + + return 0; +} + +/* + * PMU hardware loses all context when a CPU goes offline. + * When a CPU is hotplugged back in, since some hardware registers are + * UNKNOWN at reset, the PMU must be explicitly reset to avoid reading + * junk values out of them. + */ +static int cpu_pmu_notify(struct notifier_block *b, unsigned long action, + void *hcpu) +{ + int cpu = (unsigned long)hcpu; + struct arm_pmu *pmu = container_of(b, struct arm_pmu, hotplug_nb); + + if ((action & ~CPU_TASKS_FROZEN) != CPU_STARTING) + return NOTIFY_DONE; + + if (!cpumask_test_cpu(cpu, &pmu->supported_cpus)) + return NOTIFY_DONE; + + if (pmu->reset) + pmu->reset(pmu); + else + return NOTIFY_DONE; + + return NOTIFY_OK; +} + +static int cpu_pmu_init(struct arm_pmu *cpu_pmu) +{ + int err; + int cpu; + struct pmu_hw_events __percpu *cpu_hw_events; + + cpu_hw_events = alloc_percpu(struct pmu_hw_events); + if (!cpu_hw_events) + return -ENOMEM; + + cpu_pmu->hotplug_nb.notifier_call = cpu_pmu_notify; + err = register_cpu_notifier(&cpu_pmu->hotplug_nb); + if (err) + goto out_hw_events; + + for_each_possible_cpu(cpu) { + struct pmu_hw_events *events = per_cpu_ptr(cpu_hw_events, cpu); + raw_spin_lock_init(&events->pmu_lock); + events->percpu_pmu = cpu_pmu; + } + + cpu_pmu->hw_events = cpu_hw_events; + cpu_pmu->request_irq = cpu_pmu_request_irq; + cpu_pmu->free_irq = cpu_pmu_free_irq; + + /* Ensure the PMU has sane values out of reset. */ + if (cpu_pmu->reset) + on_each_cpu_mask(&cpu_pmu->supported_cpus, cpu_pmu->reset, + cpu_pmu, 1); + + /* If no interrupts available, set the corresponding capability flag */ + if (!platform_get_irq(cpu_pmu->plat_device, 0)) + cpu_pmu->pmu.capabilities |= PERF_PMU_CAP_NO_INTERRUPT; + + return 0; + +out_hw_events: + free_percpu(cpu_hw_events); + return err; +} + +static void cpu_pmu_destroy(struct arm_pmu *cpu_pmu) +{ + unregister_cpu_notifier(&cpu_pmu->hotplug_nb); + free_percpu(cpu_pmu->hw_events); +} + +/* + * CPU PMU identification and probing. + */ +static int probe_current_pmu(struct arm_pmu *pmu, + const struct pmu_probe_info *info) +{ + int cpu = get_cpu(); + unsigned int cpuid = read_cpuid_id(); + int ret = -ENODEV; + + pr_info("probing PMU on CPU %d\n", cpu); + + for (; info->init != NULL; info++) { + if ((cpuid & info->mask) != info->cpuid) + continue; + ret = info->init(pmu); + break; + } + + put_cpu(); + return ret; +} + +static int of_pmu_irq_cfg(struct arm_pmu *pmu) +{ + int i, irq, *irqs; + struct platform_device *pdev = pmu->plat_device; + + /* Don't bother with PPIs; they're already affine */ + irq = platform_get_irq(pdev, 0); + if (irq >= 0 && irq_is_percpu(irq)) + return 0; + + irqs = kcalloc(pdev->num_resources, sizeof(*irqs), GFP_KERNEL); + if (!irqs) + return -ENOMEM; + + for (i = 0; i < pdev->num_resources; ++i) { + struct device_node *dn; + int cpu; + + dn = of_parse_phandle(pdev->dev.of_node, "interrupt-affinity", + i); + if (!dn) { + pr_warn("Failed to parse %s/interrupt-affinity[%d]\n", + of_node_full_name(pdev->dev.of_node), i); + break; + } + + for_each_possible_cpu(cpu) + if (arch_find_n_match_cpu_physical_id(dn, cpu, NULL)) + break; + + if (cpu >= nr_cpu_ids) { + pr_warn("Failed to find logical CPU for %s\n", + dn->name); + of_node_put(dn); + break; + } + of_node_put(dn); + + irqs[i] = cpu; + cpumask_set_cpu(cpu, &pmu->supported_cpus); + } + + if (i == pdev->num_resources) { + pmu->irq_affinity = irqs; + } else { + kfree(irqs); + cpumask_setall(&pmu->supported_cpus); + } + + return 0; +} + +int arm_pmu_device_probe(struct platform_device *pdev, + const struct of_device_id *of_table, + const struct pmu_probe_info *probe_table) +{ + const struct of_device_id *of_id; + const int (*init_fn)(struct arm_pmu *); + struct device_node *node = pdev->dev.of_node; + struct arm_pmu *pmu; + int ret = -ENODEV; + + pmu = kzalloc(sizeof(struct arm_pmu), GFP_KERNEL); + if (!pmu) { + pr_info("failed to allocate PMU device!\n"); + return -ENOMEM; + } + + if (!__oprofile_cpu_pmu) + __oprofile_cpu_pmu = pmu; + + pmu->plat_device = pdev; + + if (node && (of_id = of_match_node(of_table, pdev->dev.of_node))) { + init_fn = of_id->data; + + ret = of_pmu_irq_cfg(pmu); + if (!ret) + ret = init_fn(pmu); + } else { + ret = probe_current_pmu(pmu, probe_table); + cpumask_setall(&pmu->supported_cpus); + } + + if (ret) { + pr_info("failed to probe PMU!\n"); + goto out_free; + } + + ret = cpu_pmu_init(pmu); + if (ret) + goto out_free; + + ret = armpmu_register(pmu, -1); + if (ret) + goto out_destroy; + + return 0; + +out_destroy: + cpu_pmu_destroy(pmu); +out_free: + pr_info("failed to register PMU devices!\n"); + kfree(pmu); + return ret; +} diff --git a/arch/arm/kernel/perf_event_cpu.c b/arch/arm/kernel/perf_event_cpu.c deleted file mode 100644 index 3b8c2833c..000000000 --- a/arch/arm/kernel/perf_event_cpu.c +++ /dev/null @@ -1,421 +0,0 @@ -/* - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. - * - * Copyright (C) 2012 ARM Limited - * - * Author: Will Deacon <will.deacon@arm.com> - */ -#define pr_fmt(fmt) "CPU PMU: " fmt - -#include <linux/bitmap.h> -#include <linux/export.h> -#include <linux/kernel.h> -#include <linux/of.h> -#include <linux/platform_device.h> -#include <linux/slab.h> -#include <linux/spinlock.h> -#include <linux/irq.h> -#include <linux/irqdesc.h> - -#include <asm/cputype.h> -#include <asm/irq_regs.h> -#include <asm/pmu.h> - -/* Set at runtime when we know what CPU type we are. */ -static struct arm_pmu *cpu_pmu; - -/* - * Despite the names, these two functions are CPU-specific and are used - * by the OProfile/perf code. - */ -const char *perf_pmu_name(void) -{ - if (!cpu_pmu) - return NULL; - - return cpu_pmu->name; -} -EXPORT_SYMBOL_GPL(perf_pmu_name); - -int perf_num_counters(void) -{ - int max_events = 0; - - if (cpu_pmu != NULL) - max_events = cpu_pmu->num_events; - - return max_events; -} -EXPORT_SYMBOL_GPL(perf_num_counters); - -/* Include the PMU-specific implementations. */ -#include "perf_event_xscale.c" -#include "perf_event_v6.c" -#include "perf_event_v7.c" - -static void cpu_pmu_enable_percpu_irq(void *data) -{ - int irq = *(int *)data; - - enable_percpu_irq(irq, IRQ_TYPE_NONE); -} - -static void cpu_pmu_disable_percpu_irq(void *data) -{ - int irq = *(int *)data; - - disable_percpu_irq(irq); -} - -static void cpu_pmu_free_irq(struct arm_pmu *cpu_pmu) -{ - int i, irq, irqs; - struct platform_device *pmu_device = cpu_pmu->plat_device; - struct pmu_hw_events __percpu *hw_events = cpu_pmu->hw_events; - - irqs = min(pmu_device->num_resources, num_possible_cpus()); - - irq = platform_get_irq(pmu_device, 0); - if (irq >= 0 && irq_is_percpu(irq)) { - on_each_cpu(cpu_pmu_disable_percpu_irq, &irq, 1); - free_percpu_irq(irq, &hw_events->percpu_pmu); - } else { - for (i = 0; i < irqs; ++i) { - int cpu = i; - - if (cpu_pmu->irq_affinity) - cpu = cpu_pmu->irq_affinity[i]; - - if (!cpumask_test_and_clear_cpu(cpu, &cpu_pmu->active_irqs)) - continue; - irq = platform_get_irq(pmu_device, i); - if (irq >= 0) - free_irq(irq, per_cpu_ptr(&hw_events->percpu_pmu, cpu)); - } - } -} - -static int cpu_pmu_request_irq(struct arm_pmu *cpu_pmu, irq_handler_t handler) -{ - int i, err, irq, irqs; - struct platform_device *pmu_device = cpu_pmu->plat_device; - struct pmu_hw_events __percpu *hw_events = cpu_pmu->hw_events; - - if (!pmu_device) - return -ENODEV; - - irqs = min(pmu_device->num_resources, num_possible_cpus()); - if (irqs < 1) { - pr_warn_once("perf/ARM: No irqs for PMU defined, sampling events not supported\n"); - return 0; - } - - irq = platform_get_irq(pmu_device, 0); - if (irq >= 0 && irq_is_percpu(irq)) { - err = request_percpu_irq(irq, handler, "arm-pmu", - &hw_events->percpu_pmu); - if (err) { - pr_err("unable to request IRQ%d for ARM PMU counters\n", - irq); - return err; - } - on_each_cpu(cpu_pmu_enable_percpu_irq, &irq, 1); - } else { - for (i = 0; i < irqs; ++i) { - int cpu = i; - - err = 0; - irq = platform_get_irq(pmu_device, i); - if (irq < 0) - continue; - - if (cpu_pmu->irq_affinity) - cpu = cpu_pmu->irq_affinity[i]; - - /* - * If we have a single PMU interrupt that we can't shift, - * assume that we're running on a uniprocessor machine and - * continue. Otherwise, continue without this interrupt. - */ - if (irq_set_affinity(irq, cpumask_of(cpu)) && irqs > 1) { - pr_warn("unable to set irq affinity (irq=%d, cpu=%u)\n", - irq, cpu); - continue; - } - - err = request_irq(irq, handler, - IRQF_NOBALANCING | IRQF_NO_THREAD, "arm-pmu", - per_cpu_ptr(&hw_events->percpu_pmu, cpu)); - if (err) { - pr_err("unable to request IRQ%d for ARM PMU counters\n", - irq); - return err; - } - - cpumask_set_cpu(cpu, &cpu_pmu->active_irqs); - } - } - - return 0; -} - -/* - * PMU hardware loses all context when a CPU goes offline. - * When a CPU is hotplugged back in, since some hardware registers are - * UNKNOWN at reset, the PMU must be explicitly reset to avoid reading - * junk values out of them. - */ -static int cpu_pmu_notify(struct notifier_block *b, unsigned long action, - void *hcpu) -{ - struct arm_pmu *pmu = container_of(b, struct arm_pmu, hotplug_nb); - - if ((action & ~CPU_TASKS_FROZEN) != CPU_STARTING) - return NOTIFY_DONE; - - if (pmu->reset) - pmu->reset(pmu); - else - return NOTIFY_DONE; - - return NOTIFY_OK; -} - -static int cpu_pmu_init(struct arm_pmu *cpu_pmu) -{ - int err; - int cpu; - struct pmu_hw_events __percpu *cpu_hw_events; - - cpu_hw_events = alloc_percpu(struct pmu_hw_events); - if (!cpu_hw_events) - return -ENOMEM; - - cpu_pmu->hotplug_nb.notifier_call = cpu_pmu_notify; - err = register_cpu_notifier(&cpu_pmu->hotplug_nb); - if (err) - goto out_hw_events; - - for_each_possible_cpu(cpu) { - struct pmu_hw_events *events = per_cpu_ptr(cpu_hw_events, cpu); - raw_spin_lock_init(&events->pmu_lock); - events->percpu_pmu = cpu_pmu; - } - - cpu_pmu->hw_events = cpu_hw_events; - cpu_pmu->request_irq = cpu_pmu_request_irq; - cpu_pmu->free_irq = cpu_pmu_free_irq; - - /* Ensure the PMU has sane values out of reset. */ - if (cpu_pmu->reset) - on_each_cpu(cpu_pmu->reset, cpu_pmu, 1); - - /* If no interrupts available, set the corresponding capability flag */ - if (!platform_get_irq(cpu_pmu->plat_device, 0)) - cpu_pmu->pmu.capabilities |= PERF_PMU_CAP_NO_INTERRUPT; - - return 0; - -out_hw_events: - free_percpu(cpu_hw_events); - return err; -} - -static void cpu_pmu_destroy(struct arm_pmu *cpu_pmu) -{ - unregister_cpu_notifier(&cpu_pmu->hotplug_nb); - free_percpu(cpu_pmu->hw_events); -} - -/* - * PMU platform driver and devicetree bindings. - */ -static const struct of_device_id cpu_pmu_of_device_ids[] = { - {.compatible = "arm,cortex-a17-pmu", .data = armv7_a17_pmu_init}, - {.compatible = "arm,cortex-a15-pmu", .data = armv7_a15_pmu_init}, - {.compatible = "arm,cortex-a12-pmu", .data = armv7_a12_pmu_init}, - {.compatible = "arm,cortex-a9-pmu", .data = armv7_a9_pmu_init}, - {.compatible = "arm,cortex-a8-pmu", .data = armv7_a8_pmu_init}, - {.compatible = "arm,cortex-a7-pmu", .data = armv7_a7_pmu_init}, - {.compatible = "arm,cortex-a5-pmu", .data = armv7_a5_pmu_init}, - {.compatible = "arm,arm11mpcore-pmu", .data = armv6mpcore_pmu_init}, - {.compatible = "arm,arm1176-pmu", .data = armv6_1176_pmu_init}, - {.compatible = "arm,arm1136-pmu", .data = armv6_1136_pmu_init}, - {.compatible = "qcom,krait-pmu", .data = krait_pmu_init}, - {.compatible = "qcom,scorpion-pmu", .data = scorpion_pmu_init}, - {.compatible = "qcom,scorpion-mp-pmu", .data = scorpion_mp_pmu_init}, - {}, -}; - -static struct platform_device_id cpu_pmu_plat_device_ids[] = { - {.name = "arm-pmu"}, - {.name = "armv6-pmu"}, - {.name = "armv7-pmu"}, - {.name = "xscale-pmu"}, - {}, -}; - -static const struct pmu_probe_info pmu_probe_table[] = { - ARM_PMU_PROBE(ARM_CPU_PART_ARM1136, armv6_1136_pmu_init), - ARM_PMU_PROBE(ARM_CPU_PART_ARM1156, armv6_1156_pmu_init), - ARM_PMU_PROBE(ARM_CPU_PART_ARM1176, armv6_1176_pmu_init), - ARM_PMU_PROBE(ARM_CPU_PART_ARM11MPCORE, armv6mpcore_pmu_init), - ARM_PMU_PROBE(ARM_CPU_PART_CORTEX_A8, armv7_a8_pmu_init), - ARM_PMU_PROBE(ARM_CPU_PART_CORTEX_A9, armv7_a9_pmu_init), - XSCALE_PMU_PROBE(ARM_CPU_XSCALE_ARCH_V1, xscale1pmu_init), - XSCALE_PMU_PROBE(ARM_CPU_XSCALE_ARCH_V2, xscale2pmu_init), - { /* sentinel value */ } -}; - -/* - * CPU PMU identification and probing. - */ -static int probe_current_pmu(struct arm_pmu *pmu) -{ - int cpu = get_cpu(); - unsigned int cpuid = read_cpuid_id(); - int ret = -ENODEV; - const struct pmu_probe_info *info; - - pr_info("probing PMU on CPU %d\n", cpu); - - for (info = pmu_probe_table; info->init != NULL; info++) { - if ((cpuid & info->mask) != info->cpuid) - continue; - ret = info->init(pmu); - break; - } - - put_cpu(); - return ret; -} - -static int of_pmu_irq_cfg(struct platform_device *pdev) -{ - int i, irq; - int *irqs; - - /* Don't bother with PPIs; they're already affine */ - irq = platform_get_irq(pdev, 0); - if (irq >= 0 && irq_is_percpu(irq)) - return 0; - - irqs = kcalloc(pdev->num_resources, sizeof(*irqs), GFP_KERNEL); - if (!irqs) - return -ENOMEM; - - for (i = 0; i < pdev->num_resources; ++i) { - struct device_node *dn; - int cpu; - - dn = of_parse_phandle(pdev->dev.of_node, "interrupt-affinity", - i); - if (!dn) { - pr_warn("Failed to parse %s/interrupt-affinity[%d]\n", - of_node_full_name(pdev->dev.of_node), i); - break; - } - - for_each_possible_cpu(cpu) - if (arch_find_n_match_cpu_physical_id(dn, cpu, NULL)) - break; - - of_node_put(dn); - if (cpu >= nr_cpu_ids) { - pr_warn("Failed to find logical CPU for %s\n", - dn->name); - break; - } - - irqs[i] = cpu; - } - - if (i == pdev->num_resources) - cpu_pmu->irq_affinity = irqs; - else - kfree(irqs); - - return 0; -} - -static int cpu_pmu_device_probe(struct platform_device *pdev) -{ - const struct of_device_id *of_id; - const int (*init_fn)(struct arm_pmu *); - struct device_node *node = pdev->dev.of_node; - struct arm_pmu *pmu; - int ret = -ENODEV; - - if (cpu_pmu) { - pr_info("attempt to register multiple PMU devices!\n"); - return -ENOSPC; - } - - pmu = kzalloc(sizeof(struct arm_pmu), GFP_KERNEL); - if (!pmu) { - pr_info("failed to allocate PMU device!\n"); - return -ENOMEM; - } - - cpu_pmu = pmu; - cpu_pmu->plat_device = pdev; - - if (node && (of_id = of_match_node(cpu_pmu_of_device_ids, pdev->dev.of_node))) { - init_fn = of_id->data; - - ret = of_pmu_irq_cfg(pdev); - if (!ret) - ret = init_fn(pmu); - } else { - ret = probe_current_pmu(pmu); - } - - if (ret) { - pr_info("failed to probe PMU!\n"); - goto out_free; - } - - ret = cpu_pmu_init(cpu_pmu); - if (ret) - goto out_free; - - ret = armpmu_register(cpu_pmu, -1); - if (ret) - goto out_destroy; - - return 0; - -out_destroy: - cpu_pmu_destroy(cpu_pmu); -out_free: - pr_info("failed to register PMU devices!\n"); - kfree(pmu); - return ret; -} - -static struct platform_driver cpu_pmu_driver = { - .driver = { - .name = "arm-pmu", - .pm = &armpmu_dev_pm_ops, - .of_match_table = cpu_pmu_of_device_ids, - }, - .probe = cpu_pmu_device_probe, - .id_table = cpu_pmu_plat_device_ids, -}; - -static int __init register_pmu_driver(void) -{ - return platform_driver_register(&cpu_pmu_driver); -} -device_initcall(register_pmu_driver); diff --git a/arch/arm/kernel/perf_event_v6.c b/arch/arm/kernel/perf_event_v6.c index f2ffd5c54..09f83e414 100644 --- a/arch/arm/kernel/perf_event_v6.c +++ b/arch/arm/kernel/perf_event_v6.c @@ -31,6 +31,14 @@ */ #if defined(CONFIG_CPU_V6) || defined(CONFIG_CPU_V6K) + +#include <asm/cputype.h> +#include <asm/irq_regs.h> +#include <asm/pmu.h> + +#include <linux/of.h> +#include <linux/platform_device.h> + enum armv6_perf_types { ARMV6_PERFCTR_ICACHE_MISS = 0x0, ARMV6_PERFCTR_IBUF_STALL = 0x1, @@ -543,24 +551,39 @@ static int armv6mpcore_pmu_init(struct arm_pmu *cpu_pmu) return 0; } -#else -static int armv6_1136_pmu_init(struct arm_pmu *cpu_pmu) -{ - return -ENODEV; -} -static int armv6_1156_pmu_init(struct arm_pmu *cpu_pmu) -{ - return -ENODEV; -} +static struct of_device_id armv6_pmu_of_device_ids[] = { + {.compatible = "arm,arm11mpcore-pmu", .data = armv6mpcore_pmu_init}, + {.compatible = "arm,arm1176-pmu", .data = armv6_1176_pmu_init}, + {.compatible = "arm,arm1136-pmu", .data = armv6_1136_pmu_init}, + { /* sentinel value */ } +}; -static int armv6_1176_pmu_init(struct arm_pmu *cpu_pmu) +static const struct pmu_probe_info armv6_pmu_probe_table[] = { + ARM_PMU_PROBE(ARM_CPU_PART_ARM1136, armv6_1136_pmu_init), + ARM_PMU_PROBE(ARM_CPU_PART_ARM1156, armv6_1156_pmu_init), + ARM_PMU_PROBE(ARM_CPU_PART_ARM1176, armv6_1176_pmu_init), + ARM_PMU_PROBE(ARM_CPU_PART_ARM11MPCORE, armv6mpcore_pmu_init), + { /* sentinel value */ } +}; + +static int armv6_pmu_device_probe(struct platform_device *pdev) { - return -ENODEV; + return arm_pmu_device_probe(pdev, armv6_pmu_of_device_ids, + armv6_pmu_probe_table); } -static int armv6mpcore_pmu_init(struct arm_pmu *cpu_pmu) +static struct platform_driver armv6_pmu_driver = { + .driver = { + .name = "armv6-pmu", + .of_match_table = armv6_pmu_of_device_ids, + }, + .probe = armv6_pmu_device_probe, +}; + +static int __init register_armv6_pmu_driver(void) { - return -ENODEV; + return platform_driver_register(&armv6_pmu_driver); } +device_initcall(register_armv6_pmu_driver); #endif /* CONFIG_CPU_V6 || CONFIG_CPU_V6K */ diff --git a/arch/arm/kernel/perf_event_v7.c b/arch/arm/kernel/perf_event_v7.c index f4207a4dc..f9b37f876 100644 --- a/arch/arm/kernel/perf_event_v7.c +++ b/arch/arm/kernel/perf_event_v7.c @@ -19,9 +19,15 @@ #ifdef CONFIG_CPU_V7 #include <asm/cp15.h> +#include <asm/cputype.h> +#include <asm/irq_regs.h> +#include <asm/pmu.h> #include <asm/vfp.h> #include "../vfp/vfpinstr.h" +#include <linux/of.h> +#include <linux/platform_device.h> + /* * Common ARMv7 event types * @@ -1056,15 +1062,22 @@ static void armv7pmu_init(struct arm_pmu *cpu_pmu) cpu_pmu->max_period = (1LLU << 32) - 1; }; -static u32 armv7_read_num_pmnc_events(void) +static void armv7_read_num_pmnc_events(void *info) { - u32 nb_cnt; + int *nb_cnt = info; /* Read the nb of CNTx counters supported from PMNC */ - nb_cnt = (armv7_pmnc_read() >> ARMV7_PMNC_N_SHIFT) & ARMV7_PMNC_N_MASK; + *nb_cnt = (armv7_pmnc_read() >> ARMV7_PMNC_N_SHIFT) & ARMV7_PMNC_N_MASK; - /* Add the CPU cycles counter and return */ - return nb_cnt + 1; + /* Add the CPU cycles counter */ + *nb_cnt += 1; +} + +static int armv7_probe_num_events(struct arm_pmu *arm_pmu) +{ + return smp_call_function_any(&arm_pmu->supported_cpus, + armv7_read_num_pmnc_events, + &arm_pmu->num_events, 1); } static int armv7_a8_pmu_init(struct arm_pmu *cpu_pmu) @@ -1072,8 +1085,7 @@ static int armv7_a8_pmu_init(struct arm_pmu *cpu_pmu) armv7pmu_init(cpu_pmu); cpu_pmu->name = "armv7_cortex_a8"; cpu_pmu->map_event = armv7_a8_map_event; - cpu_pmu->num_events = armv7_read_num_pmnc_events(); - return 0; + return armv7_probe_num_events(cpu_pmu); } static int armv7_a9_pmu_init(struct arm_pmu *cpu_pmu) @@ -1081,8 +1093,7 @@ static int armv7_a9_pmu_init(struct arm_pmu *cpu_pmu) armv7pmu_init(cpu_pmu); cpu_pmu->name = "armv7_cortex_a9"; cpu_pmu->map_event = armv7_a9_map_event; - cpu_pmu->num_events = armv7_read_num_pmnc_events(); - return 0; + return armv7_probe_num_events(cpu_pmu); } static int armv7_a5_pmu_init(struct arm_pmu *cpu_pmu) @@ -1090,8 +1101,7 @@ static int armv7_a5_pmu_init(struct arm_pmu *cpu_pmu) armv7pmu_init(cpu_pmu); cpu_pmu->name = "armv7_cortex_a5"; cpu_pmu->map_event = armv7_a5_map_event; - cpu_pmu->num_events = armv7_read_num_pmnc_events(); - return 0; + return armv7_probe_num_events(cpu_pmu); } static int armv7_a15_pmu_init(struct arm_pmu *cpu_pmu) @@ -1099,9 +1109,8 @@ static int armv7_a15_pmu_init(struct arm_pmu *cpu_pmu) armv7pmu_init(cpu_pmu); cpu_pmu->name = "armv7_cortex_a15"; cpu_pmu->map_event = armv7_a15_map_event; - cpu_pmu->num_events = armv7_read_num_pmnc_events(); cpu_pmu->set_event_filter = armv7pmu_set_event_filter; - return 0; + return armv7_probe_num_events(cpu_pmu); } static int armv7_a7_pmu_init(struct arm_pmu *cpu_pmu) @@ -1109,9 +1118,8 @@ static int armv7_a7_pmu_init(struct arm_pmu *cpu_pmu) armv7pmu_init(cpu_pmu); cpu_pmu->name = "armv7_cortex_a7"; cpu_pmu->map_event = armv7_a7_map_event; - cpu_pmu->num_events = armv7_read_num_pmnc_events(); cpu_pmu->set_event_filter = armv7pmu_set_event_filter; - return 0; + return armv7_probe_num_events(cpu_pmu); } static int armv7_a12_pmu_init(struct arm_pmu *cpu_pmu) @@ -1119,16 +1127,15 @@ static int armv7_a12_pmu_init(struct arm_pmu *cpu_pmu) armv7pmu_init(cpu_pmu); cpu_pmu->name = "armv7_cortex_a12"; cpu_pmu->map_event = armv7_a12_map_event; - cpu_pmu->num_events = armv7_read_num_pmnc_events(); cpu_pmu->set_event_filter = armv7pmu_set_event_filter; - return 0; + return armv7_probe_num_events(cpu_pmu); } static int armv7_a17_pmu_init(struct arm_pmu *cpu_pmu) { - armv7_a12_pmu_init(cpu_pmu); + int ret = armv7_a12_pmu_init(cpu_pmu); cpu_pmu->name = "armv7_cortex_a17"; - return 0; + return ret; } /* @@ -1508,14 +1515,13 @@ static int krait_pmu_init(struct arm_pmu *cpu_pmu) cpu_pmu->map_event = krait_map_event_no_branch; else cpu_pmu->map_event = krait_map_event; - cpu_pmu->num_events = armv7_read_num_pmnc_events(); cpu_pmu->set_event_filter = armv7pmu_set_event_filter; cpu_pmu->reset = krait_pmu_reset; cpu_pmu->enable = krait_pmu_enable_event; cpu_pmu->disable = krait_pmu_disable_event; cpu_pmu->get_event_idx = krait_pmu_get_event_idx; cpu_pmu->clear_event_idx = krait_pmu_clear_event_idx; - return 0; + return armv7_probe_num_events(cpu_pmu); } /* @@ -1833,13 +1839,12 @@ static int scorpion_pmu_init(struct arm_pmu *cpu_pmu) armv7pmu_init(cpu_pmu); cpu_pmu->name = "armv7_scorpion"; cpu_pmu->map_event = scorpion_map_event; - cpu_pmu->num_events = armv7_read_num_pmnc_events(); cpu_pmu->reset = scorpion_pmu_reset; cpu_pmu->enable = scorpion_pmu_enable_event; cpu_pmu->disable = scorpion_pmu_disable_event; cpu_pmu->get_event_idx = scorpion_pmu_get_event_idx; cpu_pmu->clear_event_idx = scorpion_pmu_clear_event_idx; - return 0; + return armv7_probe_num_events(cpu_pmu); } static int scorpion_mp_pmu_init(struct arm_pmu *cpu_pmu) @@ -1847,62 +1852,52 @@ static int scorpion_mp_pmu_init(struct arm_pmu *cpu_pmu) armv7pmu_init(cpu_pmu); cpu_pmu->name = "armv7_scorpion_mp"; cpu_pmu->map_event = scorpion_map_event; - cpu_pmu->num_events = armv7_read_num_pmnc_events(); cpu_pmu->reset = scorpion_pmu_reset; cpu_pmu->enable = scorpion_pmu_enable_event; cpu_pmu->disable = scorpion_pmu_disable_event; cpu_pmu->get_event_idx = scorpion_pmu_get_event_idx; cpu_pmu->clear_event_idx = scorpion_pmu_clear_event_idx; - return 0; -} -#else -static inline int armv7_a8_pmu_init(struct arm_pmu *cpu_pmu) -{ - return -ENODEV; -} - -static inline int armv7_a9_pmu_init(struct arm_pmu *cpu_pmu) -{ - return -ENODEV; -} - -static inline int armv7_a5_pmu_init(struct arm_pmu *cpu_pmu) -{ - return -ENODEV; -} - -static inline int armv7_a15_pmu_init(struct arm_pmu *cpu_pmu) -{ - return -ENODEV; -} - -static inline int armv7_a7_pmu_init(struct arm_pmu *cpu_pmu) -{ - return -ENODEV; -} + return armv7_probe_num_events(cpu_pmu); +} + +static const struct of_device_id armv7_pmu_of_device_ids[] = { + {.compatible = "arm,cortex-a17-pmu", .data = armv7_a17_pmu_init}, + {.compatible = "arm,cortex-a15-pmu", .data = armv7_a15_pmu_init}, + {.compatible = "arm,cortex-a12-pmu", .data = armv7_a12_pmu_init}, + {.compatible = "arm,cortex-a9-pmu", .data = armv7_a9_pmu_init}, + {.compatible = "arm,cortex-a8-pmu", .data = armv7_a8_pmu_init}, + {.compatible = "arm,cortex-a7-pmu", .data = armv7_a7_pmu_init}, + {.compatible = "arm,cortex-a5-pmu", .data = armv7_a5_pmu_init}, + {.compatible = "qcom,krait-pmu", .data = krait_pmu_init}, + {.compatible = "qcom,scorpion-pmu", .data = scorpion_pmu_init}, + {.compatible = "qcom,scorpion-mp-pmu", .data = scorpion_mp_pmu_init}, + {}, +}; -static inline int armv7_a12_pmu_init(struct arm_pmu *cpu_pmu) -{ - return -ENODEV; -} +static const struct pmu_probe_info armv7_pmu_probe_table[] = { + ARM_PMU_PROBE(ARM_CPU_PART_CORTEX_A8, armv7_a8_pmu_init), + ARM_PMU_PROBE(ARM_CPU_PART_CORTEX_A9, armv7_a9_pmu_init), + { /* sentinel value */ } +}; -static inline int armv7_a17_pmu_init(struct arm_pmu *cpu_pmu) -{ - return -ENODEV; -} -static inline int krait_pmu_init(struct arm_pmu *cpu_pmu) +static int armv7_pmu_device_probe(struct platform_device *pdev) { - return -ENODEV; + return arm_pmu_device_probe(pdev, armv7_pmu_of_device_ids, + armv7_pmu_probe_table); } -static inline int scorpion_pmu_init(struct arm_pmu *cpu_pmu) -{ - return -ENODEV; -} +static struct platform_driver armv7_pmu_driver = { + .driver = { + .name = "armv7-pmu", + .of_match_table = armv7_pmu_of_device_ids, + }, + .probe = armv7_pmu_device_probe, +}; -static inline int scorpion_mp_pmu_init(struct arm_pmu *cpu_pmu) +static int __init register_armv7_pmu_driver(void) { - return -ENODEV; + return platform_driver_register(&armv7_pmu_driver); } +device_initcall(register_armv7_pmu_driver); #endif /* CONFIG_CPU_V7 */ diff --git a/arch/arm/kernel/perf_event_xscale.c b/arch/arm/kernel/perf_event_xscale.c index 8af9f1f82..304d056d5 100644 --- a/arch/arm/kernel/perf_event_xscale.c +++ b/arch/arm/kernel/perf_event_xscale.c @@ -13,6 +13,14 @@ */ #ifdef CONFIG_CPU_XSCALE + +#include <asm/cputype.h> +#include <asm/irq_regs.h> +#include <asm/pmu.h> + +#include <linux/of.h> +#include <linux/platform_device.h> + enum xscale_perf_types { XSCALE_PERFCTR_ICACHE_MISS = 0x00, XSCALE_PERFCTR_ICACHE_NO_DELIVER = 0x01, @@ -740,14 +748,28 @@ static int xscale2pmu_init(struct arm_pmu *cpu_pmu) return 0; } -#else -static inline int xscale1pmu_init(struct arm_pmu *cpu_pmu) + +static const struct pmu_probe_info xscale_pmu_probe_table[] = { + XSCALE_PMU_PROBE(ARM_CPU_XSCALE_ARCH_V1, xscale1pmu_init), + XSCALE_PMU_PROBE(ARM_CPU_XSCALE_ARCH_V2, xscale2pmu_init), + { /* sentinel value */ } +}; + +static int xscale_pmu_device_probe(struct platform_device *pdev) { - return -ENODEV; + return arm_pmu_device_probe(pdev, NULL, xscale_pmu_probe_table); } -static inline int xscale2pmu_init(struct arm_pmu *cpu_pmu) +static struct platform_driver xscale_pmu_driver = { + .driver = { + .name = "xscale-pmu", + }, + .probe = xscale_pmu_device_probe, +}; + +static int __init register_xscale_pmu_driver(void) { - return -ENODEV; + return platform_driver_register(&xscale_pmu_driver); } +device_initcall(register_xscale_pmu_driver); #endif /* CONFIG_CPU_XSCALE */ diff --git a/arch/arm/kernel/reboot.c b/arch/arm/kernel/reboot.c index 1a4d23279..38269358f 100644 --- a/arch/arm/kernel/reboot.c +++ b/arch/arm/kernel/reboot.c @@ -50,7 +50,7 @@ static void __soft_restart(void *addr) flush_cache_all(); /* Switch to the identity mapping. */ - phys_reset = (phys_reset_t)(unsigned long)virt_to_phys(cpu_reset); + phys_reset = (phys_reset_t)(unsigned long)virt_to_idmap(cpu_reset); phys_reset((unsigned long)addr); /* Should never get here. */ diff --git a/arch/arm/kernel/setup.c b/arch/arm/kernel/setup.c index 6c777e908..36c18b73c 100644 --- a/arch/arm/kernel/setup.c +++ b/arch/arm/kernel/setup.c @@ -46,6 +46,7 @@ #include <asm/cacheflush.h> #include <asm/cachetype.h> #include <asm/tlbflush.h> +#include <asm/xen/hypervisor.h> #include <asm/prom.h> #include <asm/mach/arch.h> @@ -75,8 +76,7 @@ __setup("fpe=", fpe_setup); extern void init_default_cache_policy(unsigned long); extern void paging_init(const struct machine_desc *desc); -extern void early_paging_init(const struct machine_desc *, - struct proc_info_list *); +extern void early_paging_init(const struct machine_desc *); extern void sanity_check_meminfo(void); extern enum reboot_mode reboot_mode; extern void setup_dma_zone(const struct machine_desc *desc); @@ -93,6 +93,9 @@ unsigned int __atags_pointer __initdata; unsigned int system_rev; EXPORT_SYMBOL(system_rev); +const char *system_serial; +EXPORT_SYMBOL(system_serial); + unsigned int system_serial_low; EXPORT_SYMBOL(system_serial_low); @@ -839,8 +842,25 @@ arch_initcall(customize_machine); static int __init init_machine_late(void) { + struct device_node *root; + int ret; + if (machine_desc->init_late) machine_desc->init_late(); + + root = of_find_node_by_path("/"); + if (root) { + ret = of_property_read_string(root, "serial-number", + &system_serial); + if (ret) + system_serial = NULL; + } + + if (!system_serial) + system_serial = kasprintf(GFP_KERNEL, "%08x%08x", + system_serial_high, + system_serial_low); + return 0; } late_initcall(init_machine_late); @@ -936,7 +956,9 @@ void __init setup_arch(char **cmdline_p) parse_early_param(); - early_paging_init(mdesc, lookup_processor_type(read_cpuid_id())); +#ifdef CONFIG_MMU + early_paging_init(mdesc); +#endif setup_dma_zone(mdesc); sanity_check_meminfo(); arm_memblock_init(mdesc); @@ -951,6 +973,7 @@ void __init setup_arch(char **cmdline_p) arm_dt_init_cpu_maps(); psci_init(); + xen_early_init(); #ifdef CONFIG_SMP if (is_smp()) { if (!mdesc->smp_init || !mdesc->smp_init()) { @@ -1109,8 +1132,7 @@ static int c_show(struct seq_file *m, void *v) seq_printf(m, "Hardware\t: %s\n", machine_name); seq_printf(m, "Revision\t: %04x\n", system_rev); - seq_printf(m, "Serial\t\t: %08x%08x\n", - system_serial_high, system_serial_low); + seq_printf(m, "Serial\t\t: %s\n", system_serial); return 0; } diff --git a/arch/arm/kernel/sleep.S b/arch/arm/kernel/sleep.S index 7d37bfc50..0f6c10005 100644 --- a/arch/arm/kernel/sleep.S +++ b/arch/arm/kernel/sleep.S @@ -81,7 +81,7 @@ ENTRY(__cpu_suspend) mov r1, r4 @ size of save block add r0, sp, #8 @ pointer to save block bl __cpu_suspend_save - adr lr, BSYM(cpu_suspend_abort) + badr lr, cpu_suspend_abort ldmfd sp!, {r0, pc} @ call suspend fn ENDPROC(__cpu_suspend) .ltorg @@ -118,6 +118,16 @@ ENDPROC(cpu_resume_after_mmu) .text .align + +#ifdef CONFIG_MMU + .arm +ENTRY(cpu_resume_arm) + THUMB( badr r9, 1f ) @ Kernel is entered in ARM. + THUMB( bx r9 ) @ If this is a Thumb-2 kernel, + THUMB( .thumb ) @ switch to Thumb now. + THUMB(1: ) +#endif + ENTRY(cpu_resume) ARM_BE8(setend be) @ ensure we are in BE mode #ifdef CONFIG_ARM_VIRT_EXT @@ -150,6 +160,10 @@ THUMB( mov sp, r2 ) THUMB( bx r3 ) ENDPROC(cpu_resume) +#ifdef CONFIG_MMU +ENDPROC(cpu_resume_arm) +#endif + .align 2 _sleep_save_sp: .long sleep_save_sp - . diff --git a/arch/arm/kernel/smp.c b/arch/arm/kernel/smp.c index f11d82527..3d6b7821c 100644 --- a/arch/arm/kernel/smp.c +++ b/arch/arm/kernel/smp.c @@ -86,9 +86,11 @@ void __init smp_set_ops(struct smp_operations *ops) static unsigned long get_arch_pgd(pgd_t *pgd) { - phys_addr_t pgdir = virt_to_idmap(pgd); - BUG_ON(pgdir & ARCH_PGD_MASK); - return pgdir >> ARCH_PGD_SHIFT; +#ifdef CONFIG_ARM_LPAE + return __phys_to_pfn(virt_to_phys(pgd)); +#else + return virt_to_phys(pgd); +#endif } int __cpu_up(unsigned int cpu, struct task_struct *idle) @@ -108,7 +110,7 @@ int __cpu_up(unsigned int cpu, struct task_struct *idle) #endif #ifdef CONFIG_MMU - secondary_data.pgdir = get_arch_pgd(idmap_pgd); + secondary_data.pgdir = virt_to_phys(idmap_pgd); secondary_data.swapper_pg_dir = get_arch_pgd(swapper_pg_dir); #endif sync_cache_w(&secondary_data); diff --git a/arch/arm/kernel/tcm.c b/arch/arm/kernel/tcm.c index 7a3be1d4d..b10e13607 100644 --- a/arch/arm/kernel/tcm.c +++ b/arch/arm/kernel/tcm.c @@ -17,6 +17,9 @@ #include <asm/mach/map.h> #include <asm/memory.h> #include <asm/system_info.h> +#include <asm/traps.h> + +#define TCMTR_FORMAT_MASK 0xe0000000U static struct gen_pool *tcm_pool; static bool dtcm_present; @@ -176,6 +179,77 @@ static int __init setup_tcm_bank(u8 type, u8 bank, u8 banks, } /* + * When we are running in the non-secure world and the secure world + * has not explicitly given us access to the TCM we will get an + * undefined error when reading the TCM region register in the + * setup_tcm_bank function (above). + * + * There are two variants of this register read that we need to trap, + * the read for the data TCM and the read for the instruction TCM: + * c0370628: ee196f11 mrc 15, 0, r6, cr9, cr1, {0} + * c0370674: ee196f31 mrc 15, 0, r6, cr9, cr1, {1} + * + * Our undef hook mask explicitly matches all fields of the encoded + * instruction other than the destination register. The mask also + * only allows operand 2 to have the values 0 or 1. + * + * The undefined hook is defined as __init and __initdata, and therefore + * must be removed before tcm_init returns. + * + * In this particular case (MRC with ARM condition code ALways) the + * Thumb-2 and ARM instruction encoding are identical, so this hook + * will work on a Thumb-2 kernel. + * + * See A8.8.107, DDI0406C_C ARM Architecture Reference Manual, Encoding + * T1/A1 for the bit-by-bit details. + * + * mrc p15, 0, XX, c9, c1, 0 + * mrc p15, 0, XX, c9, c1, 1 + * | | | | | | | +---- opc2 0|1 = 000|001 + * | | | | | | +------- CRm 0 = 0001 + * | | | | | +----------- CRn 0 = 1001 + * | | | | +--------------- Rt ? = ???? + * | | | +------------------- opc1 0 = 000 + * | | +----------------------- coproc 15 = 1111 + * | +-------------------------- condition ALways = 1110 + * +----------------------------- instruction MRC = 1110 + * + * Encoding this as per A8.8.107 of DDI0406C, Encoding T1/A1, yields: + * 1111 1111 1111 1111 0000 1111 1101 1111 Required Mask + * 1110 1110 0001 1001 ???? 1111 0001 0001 mrc p15, 0, XX, c9, c1, 0 + * 1110 1110 0001 1001 ???? 1111 0011 0001 mrc p15, 0, XX, c9, c1, 1 + * [ ] [ ] [ ]| [ ] [ ] [ ] [ ]| +--- CRm + * | | | | | | | | +----- SBO + * | | | | | | | +------- opc2 + * | | | | | | +----------- coproc + * | | | | | +---------------- Rt + * | | | | +--------------------- CRn + * | | | +------------------------- SBO + * | | +--------------------------- opc1 + * | +------------------------------- instruction + * +------------------------------------ condition + */ +#define TCM_REGION_READ_MASK 0xffff0fdf +#define TCM_REGION_READ_INSTR 0xee190f11 +#define DEST_REG_SHIFT 12 +#define DEST_REG_MASK 0xf + +static int __init tcm_handler(struct pt_regs *regs, unsigned int instr) +{ + regs->uregs[(instr >> DEST_REG_SHIFT) & DEST_REG_MASK] = 0; + regs->ARM_pc += 4; + return 0; +} + +static struct undef_hook tcm_hook __initdata = { + .instr_mask = TCM_REGION_READ_MASK, + .instr_val = TCM_REGION_READ_INSTR, + .cpsr_mask = MODE_MASK, + .cpsr_val = SVC_MODE, + .fn = tcm_handler +}; + +/* * This initializes the TCM memory */ void __init tcm_init(void) @@ -204,9 +278,18 @@ void __init tcm_init(void) } tcm_status = read_cpuid_tcmstatus(); + + /* + * This code only supports v6-compatible TCMTR implementations. + */ + if (tcm_status & TCMTR_FORMAT_MASK) + return; + dtcm_banks = (tcm_status >> 16) & 0x03; itcm_banks = (tcm_status & 0x03); + register_undef_hook(&tcm_hook); + /* Values greater than 2 for D/ITCM banks are "reserved" */ if (dtcm_banks > 2) dtcm_banks = 0; @@ -218,7 +301,7 @@ void __init tcm_init(void) for (i = 0; i < dtcm_banks; i++) { ret = setup_tcm_bank(0, i, dtcm_banks, &dtcm_end); if (ret) - return; + goto unregister; } /* This means you compiled more code than fits into DTCM */ if (dtcm_code_sz > (dtcm_end - DTCM_OFFSET)) { @@ -227,6 +310,12 @@ void __init tcm_init(void) dtcm_code_sz, (dtcm_end - DTCM_OFFSET)); goto no_dtcm; } + /* + * This means that the DTCM sizes were 0 or the DTCM banks + * were inaccessible due to TrustZone configuration. + */ + if (!(dtcm_end - DTCM_OFFSET)) + goto no_dtcm; dtcm_res.end = dtcm_end - 1; request_resource(&iomem_resource, &dtcm_res); dtcm_iomap[0].length = dtcm_end - DTCM_OFFSET; @@ -250,15 +339,21 @@ no_dtcm: for (i = 0; i < itcm_banks; i++) { ret = setup_tcm_bank(1, i, itcm_banks, &itcm_end); if (ret) - return; + goto unregister; } /* This means you compiled more code than fits into ITCM */ if (itcm_code_sz > (itcm_end - ITCM_OFFSET)) { pr_info("CPU ITCM: %u bytes of code compiled to " "ITCM but only %lu bytes of ITCM present\n", itcm_code_sz, (itcm_end - ITCM_OFFSET)); - return; + goto unregister; } + /* + * This means that the ITCM sizes were 0 or the ITCM banks + * were inaccessible due to TrustZone configuration. + */ + if (!(itcm_end - ITCM_OFFSET)) + goto unregister; itcm_res.end = itcm_end - 1; request_resource(&iomem_resource, &itcm_res); itcm_iomap[0].length = itcm_end - ITCM_OFFSET; @@ -275,6 +370,9 @@ no_dtcm: pr_info("CPU ITCM: %u bytes of code compiled to ITCM but no " "ITCM banks present in CPU\n", itcm_code_sz); } + +unregister: + unregister_undef_hook(&tcm_hook); } /* diff --git a/arch/arm/kernel/traps.c b/arch/arm/kernel/traps.c index 3dce1a342..d35822623 100644 --- a/arch/arm/kernel/traps.c +++ b/arch/arm/kernel/traps.c @@ -749,14 +749,6 @@ late_initcall(arm_mrc_hook_init); #endif -void __bad_xchg(volatile void *ptr, int size) -{ - pr_err("xchg: bad data size: pc 0x%p, ptr 0x%p, size %d\n", - __builtin_return_address(0), ptr, size); - BUG(); -} -EXPORT_SYMBOL(__bad_xchg); - /* * A data abort trap was taken, but we did not handle the instruction. * Try to abort the user program, or panic if it was the kernel. diff --git a/arch/arm/kernel/vdso.c b/arch/arm/kernel/vdso.c index efe17dd9b..54a5aeab9 100644 --- a/arch/arm/kernel/vdso.c +++ b/arch/arm/kernel/vdso.c @@ -296,7 +296,6 @@ static bool tk_is_cntvct(const struct timekeeper *tk) */ void update_vsyscall(struct timekeeper *tk) { - struct timespec xtime_coarse; struct timespec64 *wtm = &tk->wall_to_monotonic; if (!cntvct_ok) { @@ -308,10 +307,10 @@ void update_vsyscall(struct timekeeper *tk) vdso_write_begin(vdso_data); - xtime_coarse = __current_kernel_time(); vdso_data->tk_is_cntvct = tk_is_cntvct(tk); - vdso_data->xtime_coarse_sec = xtime_coarse.tv_sec; - vdso_data->xtime_coarse_nsec = xtime_coarse.tv_nsec; + vdso_data->xtime_coarse_sec = tk->xtime_sec; + vdso_data->xtime_coarse_nsec = (u32)(tk->tkr_mono.xtime_nsec >> + tk->tkr_mono.shift); vdso_data->wtm_clock_sec = wtm->tv_sec; vdso_data->wtm_clock_nsec = wtm->tv_nsec; diff --git a/arch/arm/kvm/Kconfig b/arch/arm/kvm/Kconfig index f1f79d104..bfb915d05 100644 --- a/arch/arm/kvm/Kconfig +++ b/arch/arm/kvm/Kconfig @@ -28,6 +28,7 @@ config KVM select KVM_GENERIC_DIRTYLOG_READ_PROTECT select SRCU select MMU_NOTIFIER + select KVM_VFIO select HAVE_KVM_EVENTFD select HAVE_KVM_IRQFD depends on ARM_VIRT_EXT && ARM_LPAE && ARM_ARCH_TIMER diff --git a/arch/arm/kvm/Makefile b/arch/arm/kvm/Makefile index 139e46c08..c5eef02c5 100644 --- a/arch/arm/kvm/Makefile +++ b/arch/arm/kvm/Makefile @@ -15,7 +15,7 @@ AFLAGS_init.o := -Wa,-march=armv7-a$(plus_virt) AFLAGS_interrupts.o := -Wa,-march=armv7-a$(plus_virt) KVM := ../../../virt/kvm -kvm-arm-y = $(KVM)/kvm_main.o $(KVM)/coalesced_mmio.o $(KVM)/eventfd.o +kvm-arm-y = $(KVM)/kvm_main.o $(KVM)/coalesced_mmio.o $(KVM)/eventfd.o $(KVM)/vfio.o obj-y += kvm-arm.o init.o interrupts.o obj-y += arm.o handle_exit.o guest.o mmu.o emulate.o reset.o diff --git a/arch/arm/kvm/arm.c b/arch/arm/kvm/arm.c index d9631ecdd..bc738d2b8 100644 --- a/arch/arm/kvm/arm.c +++ b/arch/arm/kvm/arm.c @@ -171,7 +171,6 @@ int kvm_vm_ioctl_check_extension(struct kvm *kvm, long ext) int r; switch (ext) { case KVM_CAP_IRQCHIP: - case KVM_CAP_IRQFD: case KVM_CAP_IOEVENTFD: case KVM_CAP_DEVICE_CTRL: case KVM_CAP_USER_MEMORY: @@ -532,6 +531,7 @@ int kvm_arch_vcpu_ioctl_run(struct kvm_vcpu *vcpu, struct kvm_run *run) kvm_vgic_flush_hwstate(vcpu); kvm_timer_flush_hwstate(vcpu); + preempt_disable(); local_irq_disable(); /* @@ -544,6 +544,7 @@ int kvm_arch_vcpu_ioctl_run(struct kvm_vcpu *vcpu, struct kvm_run *run) if (ret <= 0 || need_new_vmid_gen(vcpu->kvm)) { local_irq_enable(); + preempt_enable(); kvm_timer_sync_hwstate(vcpu); kvm_vgic_sync_hwstate(vcpu); continue; @@ -553,14 +554,16 @@ int kvm_arch_vcpu_ioctl_run(struct kvm_vcpu *vcpu, struct kvm_run *run) * Enter the guest */ trace_kvm_entry(*vcpu_pc(vcpu)); - kvm_guest_enter(); + __kvm_guest_enter(); vcpu->mode = IN_GUEST_MODE; ret = kvm_call_hyp(__kvm_vcpu_run, vcpu); vcpu->mode = OUTSIDE_GUEST_MODE; - kvm_guest_exit(); - trace_kvm_exit(kvm_vcpu_trap_get_class(vcpu), *vcpu_pc(vcpu)); + /* + * Back from guest + *************************************************************/ + /* * We may have taken a host interrupt in HYP mode (ie * while executing the guest). This interrupt is still @@ -574,8 +577,17 @@ int kvm_arch_vcpu_ioctl_run(struct kvm_vcpu *vcpu, struct kvm_run *run) local_irq_enable(); /* - * Back from guest - *************************************************************/ + * We do local_irq_enable() before calling kvm_guest_exit() so + * that if a timer interrupt hits while running the guest we + * account that tick as being spent in the guest. We enable + * preemption after calling kvm_guest_exit() so that if we get + * preempted we make sure ticks after that is not counted as + * guest time. + */ + kvm_guest_exit(); + trace_kvm_exit(kvm_vcpu_trap_get_class(vcpu), *vcpu_pc(vcpu)); + preempt_enable(); + kvm_timer_sync_hwstate(vcpu); kvm_vgic_sync_hwstate(vcpu); diff --git a/arch/arm/kvm/interrupts.S b/arch/arm/kvm/interrupts.S index f7db3a5d8..568494dbb 100644 --- a/arch/arm/kvm/interrupts.S +++ b/arch/arm/kvm/interrupts.S @@ -307,7 +307,7 @@ ENTRY(kvm_call_hyp) THUMB( orr r2, r2, #PSR_T_BIT ) msr spsr_cxsf, r2 mrs r1, ELR_hyp - ldr r2, =BSYM(panic) + ldr r2, =panic msr ELR_hyp, r2 ldr r0, =\panic_str clrex @ Clear exclusive monitor diff --git a/arch/arm/kvm/interrupts_head.S b/arch/arm/kvm/interrupts_head.S index 48efe2ee4..702740d37 100644 --- a/arch/arm/kvm/interrupts_head.S +++ b/arch/arm/kvm/interrupts_head.S @@ -412,7 +412,6 @@ vcpu .req r0 @ vcpu pointer always in r0 add r11, vcpu, #VCPU_VGIC_CPU /* Save all interesting registers */ - ldr r3, [r2, #GICH_HCR] ldr r4, [r2, #GICH_VMCR] ldr r5, [r2, #GICH_MISR] ldr r6, [r2, #GICH_EISR0] @@ -420,7 +419,6 @@ vcpu .req r0 @ vcpu pointer always in r0 ldr r8, [r2, #GICH_ELRSR0] ldr r9, [r2, #GICH_ELRSR1] ldr r10, [r2, #GICH_APR] -ARM_BE8(rev r3, r3 ) ARM_BE8(rev r4, r4 ) ARM_BE8(rev r5, r5 ) ARM_BE8(rev r6, r6 ) @@ -429,7 +427,6 @@ ARM_BE8(rev r8, r8 ) ARM_BE8(rev r9, r9 ) ARM_BE8(rev r10, r10 ) - str r3, [r11, #VGIC_V2_CPU_HCR] str r4, [r11, #VGIC_V2_CPU_VMCR] str r5, [r11, #VGIC_V2_CPU_MISR] #ifdef CONFIG_CPU_ENDIAN_BE8 diff --git a/arch/arm/kvm/mmu.c b/arch/arm/kvm/mmu.c index 1d5accbd3..7b4201294 100644 --- a/arch/arm/kvm/mmu.c +++ b/arch/arm/kvm/mmu.c @@ -691,8 +691,8 @@ int kvm_alloc_stage2_pgd(struct kvm *kvm) * work. This is not used by the hardware and we have no * alignment requirement for this allocation. */ - pgd = (pgd_t *)kmalloc(PTRS_PER_S2_PGD * sizeof(pgd_t), - GFP_KERNEL | __GFP_ZERO); + pgd = kmalloc(PTRS_PER_S2_PGD * sizeof(pgd_t), + GFP_KERNEL | __GFP_ZERO); if (!pgd) { kvm_free_hwpgd(hwpgd); @@ -1155,7 +1155,8 @@ static void stage2_wp_range(struct kvm *kvm, phys_addr_t addr, phys_addr_t end) */ void kvm_mmu_wp_memory_region(struct kvm *kvm, int slot) { - struct kvm_memory_slot *memslot = id_to_memslot(kvm->memslots, slot); + struct kvm_memslots *slots = kvm_memslots(kvm); + struct kvm_memory_slot *memslot = id_to_memslot(slots, slot); phys_addr_t start = memslot->base_gfn << PAGE_SHIFT; phys_addr_t end = (memslot->base_gfn + memslot->npages) << PAGE_SHIFT; @@ -1718,8 +1719,9 @@ out: } void kvm_arch_commit_memory_region(struct kvm *kvm, - struct kvm_userspace_memory_region *mem, + const struct kvm_userspace_memory_region *mem, const struct kvm_memory_slot *old, + const struct kvm_memory_slot *new, enum kvm_mr_change change) { /* @@ -1733,7 +1735,7 @@ void kvm_arch_commit_memory_region(struct kvm *kvm, int kvm_arch_prepare_memory_region(struct kvm *kvm, struct kvm_memory_slot *memslot, - struct kvm_userspace_memory_region *mem, + const struct kvm_userspace_memory_region *mem, enum kvm_mr_change change) { hva_t hva = mem->userspace_addr; @@ -1838,7 +1840,7 @@ int kvm_arch_create_memslot(struct kvm *kvm, struct kvm_memory_slot *slot, return 0; } -void kvm_arch_memslots_updated(struct kvm *kvm) +void kvm_arch_memslots_updated(struct kvm *kvm, struct kvm_memslots *slots) { } diff --git a/arch/arm/kvm/psci.c b/arch/arm/kvm/psci.c index 531e92248..4b94b5131 100644 --- a/arch/arm/kvm/psci.c +++ b/arch/arm/kvm/psci.c @@ -24,6 +24,8 @@ #include <asm/kvm_psci.h> #include <asm/kvm_host.h> +#include <uapi/linux/psci.h> + /* * This is an implementation of the Power State Coordination Interface * as described in ARM document number ARM DEN 0022A. diff --git a/arch/arm/lib/call_with_stack.S b/arch/arm/lib/call_with_stack.S index ed1a42181..bf3a40889 100644 --- a/arch/arm/lib/call_with_stack.S +++ b/arch/arm/lib/call_with_stack.S @@ -35,7 +35,7 @@ ENTRY(call_with_stack) mov r2, r0 mov r0, r1 - adr lr, BSYM(1f) + badr lr, 1f ret r2 1: ldr lr, [sp] diff --git a/arch/arm/lib/lib1funcs.S b/arch/arm/lib/lib1funcs.S index 947567ff6..af2267f6a 100644 --- a/arch/arm/lib/lib1funcs.S +++ b/arch/arm/lib/lib1funcs.S @@ -167,7 +167,7 @@ Boston, MA 02111-1307, USA. */ #endif - @ Perform all needed substractions to keep only the reminder. + @ Perform all needed subtractions to keep only the reminder. @ Do comparisons in batch of 4 first. subs \order, \order, #3 @ yes, 3 is intended here blt 2f @@ -189,7 +189,7 @@ Boston, MA 02111-1307, USA. */ teqne \dividend, #0 beq 5f - @ Either 1, 2 or 3 comparison/substractions are left. + @ Either 1, 2 or 3 comparison/subtractions are left. 2: cmn \order, #2 blt 4f beq 3f diff --git a/arch/arm/lib/memcpy.S b/arch/arm/lib/memcpy.S index 7797e81e4..64111bd44 100644 --- a/arch/arm/lib/memcpy.S +++ b/arch/arm/lib/memcpy.S @@ -61,8 +61,10 @@ /* Prototype: void *memcpy(void *dest, const void *src, size_t n); */ +ENTRY(mmiocpy) ENTRY(memcpy) #include "copy_template.S" ENDPROC(memcpy) +ENDPROC(mmiocpy) diff --git a/arch/arm/lib/memset.S b/arch/arm/lib/memset.S index a4ee97b5a..3c65e3bd7 100644 --- a/arch/arm/lib/memset.S +++ b/arch/arm/lib/memset.S @@ -16,6 +16,7 @@ .text .align 5 +ENTRY(mmioset) ENTRY(memset) UNWIND( .fnstart ) ands r3, r0, #3 @ 1 unaligned? @@ -133,3 +134,4 @@ UNWIND( .fnstart ) b 1b UNWIND( .fnend ) ENDPROC(memset) +ENDPROC(mmioset) diff --git a/arch/arm/lib/uaccess_with_memcpy.c b/arch/arm/lib/uaccess_with_memcpy.c index 3e58d7100..4b39af2df 100644 --- a/arch/arm/lib/uaccess_with_memcpy.c +++ b/arch/arm/lib/uaccess_with_memcpy.c @@ -96,7 +96,7 @@ __copy_to_user_memcpy(void __user *to, const void *from, unsigned long n) } /* the mmap semaphore is taken only if not in an atomic context */ - atomic = in_atomic(); + atomic = faulthandler_disabled(); if (!atomic) down_read(¤t->mm->mmap_sem); diff --git a/arch/arm/mach-at91/Makefile b/arch/arm/mach-at91/Makefile index 4fa8b4541..c5bbf8bb8 100644 --- a/arch/arm/mach-at91/Makefile +++ b/arch/arm/mach-at91/Makefile @@ -1,13 +1,8 @@ # # Makefile for the linux kernel. # -ccflags-$(CONFIG_ARCH_MULTIPLATFORM) := -I$(srctree)/$(src)/include -asflags-$(CONFIG_ARCH_MULTIPLATFORM) := -I$(srctree)/$(src)/include - obj-y := soc.o -obj-$(CONFIG_SOC_AT91SAM9) += sam9_smc.o - # CPU-specific support obj-$(CONFIG_SOC_AT91RM9200) += at91rm9200.o obj-$(CONFIG_SOC_AT91SAM9) += at91sam9.o diff --git a/arch/arm/mach-at91/Makefile.boot b/arch/arm/mach-at91/Makefile.boot deleted file mode 100644 index 29ed0fa37..000000000 --- a/arch/arm/mach-at91/Makefile.boot +++ /dev/null @@ -1,8 +0,0 @@ -# Note: the following conditions must always be true: -# ZRELADDR == virt_to_phys(TEXTADDR) -# PARAMS_PHYS must be within 4MB of ZRELADDR -# INITRD_PHYS must be in RAM - - zreladdr-y += 0x20008000 -params_phys-y := 0x20000100 -initrd_phys-y := 0x20410000 diff --git a/arch/arm/mach-at91/include/mach/at91_ramc.h b/arch/arm/mach-at91/include/mach/at91_ramc.h deleted file mode 100644 index 493bc486e..000000000 --- a/arch/arm/mach-at91/include/mach/at91_ramc.h +++ /dev/null @@ -1,28 +0,0 @@ -/* - * Header file for the Atmel RAM Controller - * - * Copyright (C) 2011 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> - * - * Under GPLv2 only - */ - -#ifndef __AT91_RAMC_H__ -#define __AT91_RAMC_H__ - -#ifndef __ASSEMBLY__ -extern void __iomem *at91_ramc_base[]; - -#define at91_ramc_read(id, field) \ - __raw_readl(at91_ramc_base[id] + field) - -#define at91_ramc_write(id, field, value) \ - __raw_writel(value, at91_ramc_base[id] + field) -#else -.extern at91_ramc_base -#endif - -#include <soc/at91/at91rm9200_sdramc.h> -#include <soc/at91/at91sam9_ddrsdr.h> -#include <soc/at91/at91sam9_sdramc.h> - -#endif /* __AT91_RAMC_H__ */ diff --git a/arch/arm/mach-at91/include/mach/at91rm9200_mc.h b/arch/arm/mach-at91/include/mach/at91rm9200_mc.h deleted file mode 100644 index aeaadfb45..000000000 --- a/arch/arm/mach-at91/include/mach/at91rm9200_mc.h +++ /dev/null @@ -1,116 +0,0 @@ -/* - * arch/arm/mach-at91/include/mach/at91rm9200_mc.h - * - * Copyright (C) 2005 Ivan Kokshaysky - * Copyright (C) SAN People - * - * Memory Controllers (MC, EBI, SMC, SDRAMC, BFC) - System peripherals registers. - * Based on AT91RM9200 datasheet revision E. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - */ - -#ifndef AT91RM9200_MC_H -#define AT91RM9200_MC_H - -/* Memory Controller */ -#define AT91_MC_RCR 0x00 /* MC Remap Control Register */ -#define AT91_MC_RCB (1 << 0) /* Remap Command Bit */ - -#define AT91_MC_ASR 0x04 /* MC Abort Status Register */ -#define AT91_MC_UNADD (1 << 0) /* Undefined Address Abort Status */ -#define AT91_MC_MISADD (1 << 1) /* Misaligned Address Abort Status */ -#define AT91_MC_ABTSZ (3 << 8) /* Abort Size Status */ -#define AT91_MC_ABTSZ_BYTE (0 << 8) -#define AT91_MC_ABTSZ_HALFWORD (1 << 8) -#define AT91_MC_ABTSZ_WORD (2 << 8) -#define AT91_MC_ABTTYP (3 << 10) /* Abort Type Status */ -#define AT91_MC_ABTTYP_DATAREAD (0 << 10) -#define AT91_MC_ABTTYP_DATAWRITE (1 << 10) -#define AT91_MC_ABTTYP_FETCH (2 << 10) -#define AT91_MC_MST0 (1 << 16) /* ARM920T Abort Source */ -#define AT91_MC_MST1 (1 << 17) /* PDC Abort Source */ -#define AT91_MC_MST2 (1 << 18) /* UHP Abort Source */ -#define AT91_MC_MST3 (1 << 19) /* EMAC Abort Source */ -#define AT91_MC_SVMST0 (1 << 24) /* Saved ARM920T Abort Source */ -#define AT91_MC_SVMST1 (1 << 25) /* Saved PDC Abort Source */ -#define AT91_MC_SVMST2 (1 << 26) /* Saved UHP Abort Source */ -#define AT91_MC_SVMST3 (1 << 27) /* Saved EMAC Abort Source */ - -#define AT91_MC_AASR 0x08 /* MC Abort Address Status Register */ - -#define AT91_MC_MPR 0x0c /* MC Master Priority Register */ -#define AT91_MPR_MSTP0 (7 << 0) /* ARM920T Priority */ -#define AT91_MPR_MSTP1 (7 << 4) /* PDC Priority */ -#define AT91_MPR_MSTP2 (7 << 8) /* UHP Priority */ -#define AT91_MPR_MSTP3 (7 << 12) /* EMAC Priority */ - -/* External Bus Interface (EBI) registers */ -#define AT91_EBI_CSA 0x60 /* Chip Select Assignment Register */ -#define AT91_EBI_CS0A (1 << 0) /* Chip Select 0 Assignment */ -#define AT91_EBI_CS0A_SMC (0 << 0) -#define AT91_EBI_CS0A_BFC (1 << 0) -#define AT91_EBI_CS1A (1 << 1) /* Chip Select 1 Assignment */ -#define AT91_EBI_CS1A_SMC (0 << 1) -#define AT91_EBI_CS1A_SDRAMC (1 << 1) -#define AT91_EBI_CS3A (1 << 3) /* Chip Select 2 Assignment */ -#define AT91_EBI_CS3A_SMC (0 << 3) -#define AT91_EBI_CS3A_SMC_SMARTMEDIA (1 << 3) -#define AT91_EBI_CS4A (1 << 4) /* Chip Select 3 Assignment */ -#define AT91_EBI_CS4A_SMC (0 << 4) -#define AT91_EBI_CS4A_SMC_COMPACTFLASH (1 << 4) -#define AT91_EBI_CFGR (AT91_MC + 0x64) /* Configuration Register */ -#define AT91_EBI_DBPUC (1 << 0) /* Data Bus Pull-Up Configuration */ - -/* Static Memory Controller (SMC) registers */ -#define AT91_SMC_CSR(n) (0x70 + ((n) * 4)) /* SMC Chip Select Register */ -#define AT91_SMC_NWS (0x7f << 0) /* Number of Wait States */ -#define AT91_SMC_NWS_(x) ((x) << 0) -#define AT91_SMC_WSEN (1 << 7) /* Wait State Enable */ -#define AT91_SMC_TDF (0xf << 8) /* Data Float Time */ -#define AT91_SMC_TDF_(x) ((x) << 8) -#define AT91_SMC_BAT (1 << 12) /* Byte Access Type */ -#define AT91_SMC_DBW (3 << 13) /* Data Bus Width */ -#define AT91_SMC_DBW_16 (1 << 13) -#define AT91_SMC_DBW_8 (2 << 13) -#define AT91_SMC_DPR (1 << 15) /* Data Read Protocol */ -#define AT91_SMC_ACSS (3 << 16) /* Address to Chip Select Setup */ -#define AT91_SMC_ACSS_STD (0 << 16) -#define AT91_SMC_ACSS_1 (1 << 16) -#define AT91_SMC_ACSS_2 (2 << 16) -#define AT91_SMC_ACSS_3 (3 << 16) -#define AT91_SMC_RWSETUP (7 << 24) /* Read & Write Signal Time Setup */ -#define AT91_SMC_RWSETUP_(x) ((x) << 24) -#define AT91_SMC_RWHOLD (7 << 28) /* Read & Write Signal Hold Time */ -#define AT91_SMC_RWHOLD_(x) ((x) << 28) - -/* Burst Flash Controller register */ -#define AT91_BFC_MR 0xc0 /* Mode Register */ -#define AT91_BFC_BFCOM (3 << 0) /* Burst Flash Controller Operating Mode */ -#define AT91_BFC_BFCOM_DISABLED (0 << 0) -#define AT91_BFC_BFCOM_ASYNC (1 << 0) -#define AT91_BFC_BFCOM_BURST (2 << 0) -#define AT91_BFC_BFCC (3 << 2) /* Burst Flash Controller Clock */ -#define AT91_BFC_BFCC_MCK (1 << 2) -#define AT91_BFC_BFCC_DIV2 (2 << 2) -#define AT91_BFC_BFCC_DIV4 (3 << 2) -#define AT91_BFC_AVL (0xf << 4) /* Address Valid Latency */ -#define AT91_BFC_PAGES (7 << 8) /* Page Size */ -#define AT91_BFC_PAGES_NO_PAGE (0 << 8) -#define AT91_BFC_PAGES_16 (1 << 8) -#define AT91_BFC_PAGES_32 (2 << 8) -#define AT91_BFC_PAGES_64 (3 << 8) -#define AT91_BFC_PAGES_128 (4 << 8) -#define AT91_BFC_PAGES_256 (5 << 8) -#define AT91_BFC_PAGES_512 (6 << 8) -#define AT91_BFC_PAGES_1024 (7 << 8) -#define AT91_BFC_OEL (3 << 12) /* Output Enable Latency */ -#define AT91_BFC_BAAEN (1 << 16) /* Burst Address Advance Enable */ -#define AT91_BFC_BFOEH (1 << 17) /* Burst Flash Output Enable Handling */ -#define AT91_BFC_MUXEN (1 << 18) /* Multiplexed Bus Enable */ -#define AT91_BFC_RDYEN (1 << 19) /* Ready Enable Mode */ - -#endif diff --git a/arch/arm/mach-at91/include/mach/at91sam9_smc.h b/arch/arm/mach-at91/include/mach/at91sam9_smc.h deleted file mode 100644 index ff54a0ce9..000000000 --- a/arch/arm/mach-at91/include/mach/at91sam9_smc.h +++ /dev/null @@ -1,98 +0,0 @@ -/* - * arch/arm/mach-at91/include/mach/at91sam9_smc.h - * - * Copyright (C) 2007 Andrew Victor - * Copyright (C) 2007 Atmel Corporation. - * - * Static Memory Controllers (SMC) - System peripherals registers. - * Based on AT91SAM9261 datasheet revision D. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - */ - -#ifndef AT91SAM9_SMC_H -#define AT91SAM9_SMC_H - -#ifndef __ASSEMBLY__ -struct sam9_smc_config { - /* Setup register */ - u8 ncs_read_setup; - u8 nrd_setup; - u8 ncs_write_setup; - u8 nwe_setup; - - /* Pulse register */ - u8 ncs_read_pulse; - u8 nrd_pulse; - u8 ncs_write_pulse; - u8 nwe_pulse; - - /* Cycle register */ - u16 read_cycle; - u16 write_cycle; - - /* Mode register */ - u32 mode; - u8 tdf_cycles:4; -}; - -extern void sam9_smc_configure(int id, int cs, struct sam9_smc_config *config); -extern void sam9_smc_read(int id, int cs, struct sam9_smc_config *config); -extern void sam9_smc_read_mode(int id, int cs, struct sam9_smc_config *config); -extern void sam9_smc_write_mode(int id, int cs, struct sam9_smc_config *config); -#endif - -#define AT91_SMC_SETUP 0x00 /* Setup Register for CS n */ -#define AT91_SMC_NWESETUP (0x3f << 0) /* NWE Setup Length */ -#define AT91_SMC_NWESETUP_(x) ((x) << 0) -#define AT91_SMC_NCS_WRSETUP (0x3f << 8) /* NCS Setup Length in Write Access */ -#define AT91_SMC_NCS_WRSETUP_(x) ((x) << 8) -#define AT91_SMC_NRDSETUP (0x3f << 16) /* NRD Setup Length */ -#define AT91_SMC_NRDSETUP_(x) ((x) << 16) -#define AT91_SMC_NCS_RDSETUP (0x3f << 24) /* NCS Setup Length in Read Access */ -#define AT91_SMC_NCS_RDSETUP_(x) ((x) << 24) - -#define AT91_SMC_PULSE 0x04 /* Pulse Register for CS n */ -#define AT91_SMC_NWEPULSE (0x7f << 0) /* NWE Pulse Length */ -#define AT91_SMC_NWEPULSE_(x) ((x) << 0) -#define AT91_SMC_NCS_WRPULSE (0x7f << 8) /* NCS Pulse Length in Write Access */ -#define AT91_SMC_NCS_WRPULSE_(x)((x) << 8) -#define AT91_SMC_NRDPULSE (0x7f << 16) /* NRD Pulse Length */ -#define AT91_SMC_NRDPULSE_(x) ((x) << 16) -#define AT91_SMC_NCS_RDPULSE (0x7f << 24) /* NCS Pulse Length in Read Access */ -#define AT91_SMC_NCS_RDPULSE_(x)((x) << 24) - -#define AT91_SMC_CYCLE 0x08 /* Cycle Register for CS n */ -#define AT91_SMC_NWECYCLE (0x1ff << 0 ) /* Total Write Cycle Length */ -#define AT91_SMC_NWECYCLE_(x) ((x) << 0) -#define AT91_SMC_NRDCYCLE (0x1ff << 16) /* Total Read Cycle Length */ -#define AT91_SMC_NRDCYCLE_(x) ((x) << 16) - -#define AT91_SMC_MODE 0x0c /* Mode Register for CS n */ -#define AT91_SMC_READMODE (1 << 0) /* Read Mode */ -#define AT91_SMC_WRITEMODE (1 << 1) /* Write Mode */ -#define AT91_SMC_EXNWMODE (3 << 4) /* NWAIT Mode */ -#define AT91_SMC_EXNWMODE_DISABLE (0 << 4) -#define AT91_SMC_EXNWMODE_FROZEN (2 << 4) -#define AT91_SMC_EXNWMODE_READY (3 << 4) -#define AT91_SMC_BAT (1 << 8) /* Byte Access Type */ -#define AT91_SMC_BAT_SELECT (0 << 8) -#define AT91_SMC_BAT_WRITE (1 << 8) -#define AT91_SMC_DBW (3 << 12) /* Data Bus Width */ -#define AT91_SMC_DBW_8 (0 << 12) -#define AT91_SMC_DBW_16 (1 << 12) -#define AT91_SMC_DBW_32 (2 << 12) -#define AT91_SMC_TDF (0xf << 16) /* Data Float Time. */ -#define AT91_SMC_TDF_(x) ((x) << 16) -#define AT91_SMC_TDFMODE (1 << 20) /* TDF Optimization - Enabled */ -#define AT91_SMC_PMEN (1 << 24) /* Page Mode Enabled */ -#define AT91_SMC_PS (3 << 28) /* Page Size */ -#define AT91_SMC_PS_4 (0 << 28) -#define AT91_SMC_PS_8 (1 << 28) -#define AT91_SMC_PS_16 (2 << 28) -#define AT91_SMC_PS_32 (3 << 28) - -#endif diff --git a/arch/arm/mach-at91/pm.c b/arch/arm/mach-at91/pm.c index 5062699cb..e24df77ab 100644 --- a/arch/arm/mach-at91/pm.c +++ b/arch/arm/mach-at91/pm.c @@ -233,7 +233,7 @@ static void at91_pm_set_standby(void (*at91_standby)(void)) */ static void at91rm9200_standby(void) { - u32 lpr = at91_ramc_read(0, AT91RM9200_SDRAMC_LPR); + u32 lpr = at91_ramc_read(0, AT91_MC_SDRAMC_LPR); asm volatile( "b 1f\n\t" @@ -244,8 +244,8 @@ static void at91rm9200_standby(void) " mcr p15, 0, %0, c7, c0, 4\n\t" " str %5, [%1, %2]" : - : "r" (0), "r" (at91_ramc_base[0]), "r" (AT91RM9200_SDRAMC_LPR), - "r" (1), "r" (AT91RM9200_SDRAMC_SRR), + : "r" (0), "r" (at91_ramc_base[0]), "r" (AT91_MC_SDRAMC_LPR), + "r" (1), "r" (AT91_MC_SDRAMC_SRR), "r" (lpr)); } @@ -369,7 +369,7 @@ static void __init at91_pm_sram_init(void) return; } - sram_pool = dev_get_gen_pool(&pdev->dev); + sram_pool = gen_pool_get(&pdev->dev); if (!sram_pool) { pr_warn("%s: sram pool unavailable!\n", __func__); return; @@ -414,7 +414,7 @@ void __init at91rm9200_pm_init(void) /* * AT91RM9200 SDRAM low-power mode cannot be used with self-refresh. */ - at91_ramc_write(0, AT91RM9200_SDRAMC_LPR, 0); + at91_ramc_write(0, AT91_MC_SDRAMC_LPR, 0); at91_pm_data.uhp_udp_mask = AT91RM9200_PMC_UHP | AT91RM9200_PMC_UDP; at91_pm_data.memctrl = AT91_MEMCTRL_MC; diff --git a/arch/arm/mach-at91/pm.h b/arch/arm/mach-at91/pm.h index ecd875a91..3fcf8810f 100644 --- a/arch/arm/mach-at91/pm.h +++ b/arch/arm/mach-at91/pm.h @@ -13,7 +13,19 @@ #include <asm/proc-fns.h> -#include <mach/at91_ramc.h> +#include <linux/mfd/syscon/atmel-mc.h> +#include <soc/at91/at91sam9_ddrsdr.h> +#include <soc/at91/at91sam9_sdramc.h> + +#ifndef __ASSEMBLY__ +extern void __iomem *at91_ramc_base[]; + +#define at91_ramc_read(id, field) \ + __raw_readl(at91_ramc_base[id] + field) + +#define at91_ramc_write(id, field, value) \ + __raw_writel(value, at91_ramc_base[id] + field) +#endif #define AT91_MEMCTRL_MC 0 #define AT91_MEMCTRL_SDRAMC 1 diff --git a/arch/arm/mach-at91/pm_suspend.S b/arch/arm/mach-at91/pm_suspend.S index bd22b2c8a..0d95f488b 100644 --- a/arch/arm/mach-at91/pm_suspend.S +++ b/arch/arm/mach-at91/pm_suspend.S @@ -13,7 +13,6 @@ */ #include <linux/linkage.h> #include <linux/clk/at91_pmc.h> -#include <mach/at91_ramc.h> #include "pm.h" #define SRAMC_SELF_FRESH_ACTIVE 0x01 @@ -216,7 +215,7 @@ ENTRY(at91_sramc_self_refresh) /* Active SDRAM self-refresh mode */ mov r3, #1 - str r3, [r2, #AT91RM9200_SDRAMC_SRR] + str r3, [r2, #AT91_MC_SDRAMC_SRR] b exit_sramc_sf ddrc_sf: diff --git a/arch/arm/mach-at91/sam9_smc.c b/arch/arm/mach-at91/sam9_smc.c deleted file mode 100644 index 826315af6..000000000 --- a/arch/arm/mach-at91/sam9_smc.c +++ /dev/null @@ -1,136 +0,0 @@ -/* - * linux/arch/arm/mach-at91/sam9_smc.c - * - * Copyright (C) 2008 Andrew Victor - * Copyright (C) 2011 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#include <linux/module.h> -#include <linux/io.h> -#include <linux/of.h> -#include <linux/of_address.h> - -#include <mach/at91sam9_smc.h> - -#include "sam9_smc.h" - - -#define AT91_SMC_CS(id, n) (smc_base_addr[id] + ((n) * 0x10)) - -static void __iomem *smc_base_addr[2]; - -static void sam9_smc_cs_write_mode(void __iomem *base, - struct sam9_smc_config *config) -{ - __raw_writel(config->mode - | AT91_SMC_TDF_(config->tdf_cycles), - base + AT91_SMC_MODE); -} - -void sam9_smc_write_mode(int id, int cs, - struct sam9_smc_config *config) -{ - sam9_smc_cs_write_mode(AT91_SMC_CS(id, cs), config); -} -EXPORT_SYMBOL_GPL(sam9_smc_write_mode); - -static void sam9_smc_cs_configure(void __iomem *base, - struct sam9_smc_config *config) -{ - - /* Setup register */ - __raw_writel(AT91_SMC_NWESETUP_(config->nwe_setup) - | AT91_SMC_NCS_WRSETUP_(config->ncs_write_setup) - | AT91_SMC_NRDSETUP_(config->nrd_setup) - | AT91_SMC_NCS_RDSETUP_(config->ncs_read_setup), - base + AT91_SMC_SETUP); - - /* Pulse register */ - __raw_writel(AT91_SMC_NWEPULSE_(config->nwe_pulse) - | AT91_SMC_NCS_WRPULSE_(config->ncs_write_pulse) - | AT91_SMC_NRDPULSE_(config->nrd_pulse) - | AT91_SMC_NCS_RDPULSE_(config->ncs_read_pulse), - base + AT91_SMC_PULSE); - - /* Cycle register */ - __raw_writel(AT91_SMC_NWECYCLE_(config->write_cycle) - | AT91_SMC_NRDCYCLE_(config->read_cycle), - base + AT91_SMC_CYCLE); - - /* Mode register */ - sam9_smc_cs_write_mode(base, config); -} - -void sam9_smc_configure(int id, int cs, - struct sam9_smc_config *config) -{ - sam9_smc_cs_configure(AT91_SMC_CS(id, cs), config); -} -EXPORT_SYMBOL_GPL(sam9_smc_configure); - -static void sam9_smc_cs_read_mode(void __iomem *base, - struct sam9_smc_config *config) -{ - u32 val = __raw_readl(base + AT91_SMC_MODE); - - config->mode = (val & ~AT91_SMC_NWECYCLE); - config->tdf_cycles = (val & AT91_SMC_NWECYCLE) >> 16 ; -} - -void sam9_smc_read_mode(int id, int cs, - struct sam9_smc_config *config) -{ - sam9_smc_cs_read_mode(AT91_SMC_CS(id, cs), config); -} -EXPORT_SYMBOL_GPL(sam9_smc_read_mode); - -static void sam9_smc_cs_read(void __iomem *base, - struct sam9_smc_config *config) -{ - u32 val; - - /* Setup register */ - val = __raw_readl(base + AT91_SMC_SETUP); - - config->nwe_setup = val & AT91_SMC_NWESETUP; - config->ncs_write_setup = (val & AT91_SMC_NCS_WRSETUP) >> 8; - config->nrd_setup = (val & AT91_SMC_NRDSETUP) >> 16; - config->ncs_read_setup = (val & AT91_SMC_NCS_RDSETUP) >> 24; - - /* Pulse register */ - val = __raw_readl(base + AT91_SMC_PULSE); - - config->nwe_pulse = val & AT91_SMC_NWEPULSE; - config->ncs_write_pulse = (val & AT91_SMC_NCS_WRPULSE) >> 8; - config->nrd_pulse = (val & AT91_SMC_NRDPULSE) >> 16; - config->ncs_read_pulse = (val & AT91_SMC_NCS_RDPULSE) >> 24; - - /* Cycle register */ - val = __raw_readl(base + AT91_SMC_CYCLE); - - config->write_cycle = val & AT91_SMC_NWECYCLE; - config->read_cycle = (val & AT91_SMC_NRDCYCLE) >> 16; - - /* Mode register */ - sam9_smc_cs_read_mode(base, config); -} - -void sam9_smc_read(int id, int cs, struct sam9_smc_config *config) -{ - sam9_smc_cs_read(AT91_SMC_CS(id, cs), config); -} - -void __init at91sam9_ioremap_smc(int id, u32 addr) -{ - if (id > 1) { - pr_warn("%s: id > 2\n", __func__); - return; - } - smc_base_addr[id] = ioremap(addr, 512); - if (!smc_base_addr[id]) - pr_warn("Impossible to ioremap smc.%d 0x%x\n", id, addr); -} diff --git a/arch/arm/mach-at91/sam9_smc.h b/arch/arm/mach-at91/sam9_smc.h deleted file mode 100644 index 3e52dcd4a..000000000 --- a/arch/arm/mach-at91/sam9_smc.h +++ /dev/null @@ -1,11 +0,0 @@ -/* - * linux/arch/arm/mach-at91/sam9_smc. - * - * Copyright (C) 2008 Andrew Victor - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -extern void __init at91sam9_ioremap_smc(int id, u32 addr); diff --git a/arch/arm/mach-bcm/Kconfig b/arch/arm/mach-bcm/Kconfig index 8b11f44bb..0ac9e4b3b 100644 --- a/arch/arm/mach-bcm/Kconfig +++ b/arch/arm/mach-bcm/Kconfig @@ -144,6 +144,7 @@ config ARCH_BRCMSTB select BRCMSTB_GISB_ARB select BRCMSTB_L2_IRQ select BCM7120_L2_IRQ + select ARCH_WANT_OPTIONAL_GPIOLIB help Say Y if you intend to run the kernel on a Broadcom ARM-based STB chipset. diff --git a/arch/arm/mach-bcm/Makefile b/arch/arm/mach-bcm/Makefile index 4c38674c7..4fb0da458 100644 --- a/arch/arm/mach-bcm/Makefile +++ b/arch/arm/mach-bcm/Makefile @@ -38,10 +38,15 @@ obj-$(CONFIG_ARCH_BCM2835) += board_bcm2835.o obj-$(CONFIG_ARCH_BCM_5301X) += bcm_5301x.o # BCM63XXx -obj-$(CONFIG_ARCH_BCM_63XX) := bcm63xx.o +ifeq ($(CONFIG_ARCH_BCM_63XX),y) +CFLAGS_bcm63xx_headsmp.o += -march=armv7-a +obj-y += bcm63xx.o +obj-$(CONFIG_SMP) += bcm63xx_smp.o bcm63xx_headsmp.o \ + bcm63xx_pmb.o +endif ifeq ($(CONFIG_ARCH_BRCMSTB),y) CFLAGS_platsmp-brcmstb.o += -march=armv7-a obj-y += brcmstb.o -obj-$(CONFIG_SMP) += headsmp-brcmstb.o platsmp-brcmstb.o +obj-$(CONFIG_SMP) += platsmp-brcmstb.o endif diff --git a/arch/arm/mach-bcm/bcm63xx_headsmp.S b/arch/arm/mach-bcm/bcm63xx_headsmp.S new file mode 100644 index 000000000..c7af397c7 --- /dev/null +++ b/arch/arm/mach-bcm/bcm63xx_headsmp.S @@ -0,0 +1,23 @@ +/* + * Copyright (C) 2015, Broadcom Corporation + * All Rights Reserved + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#include <linux/linkage.h> +#include <linux/init.h> +#include <asm/assembler.h> + +ENTRY(bcm63138_secondary_startup) + ARM_BE8(setend be) + /* + * L1 cache does have unpredictable contents at power-up clean its + * contents without flushing + */ + bl v7_invalidate_l1 + nop + + b secondary_startup +ENDPROC(bcm63138_secondary_startup) diff --git a/arch/arm/mach-bcm/bcm63xx_pmb.c b/arch/arm/mach-bcm/bcm63xx_pmb.c new file mode 100644 index 000000000..de061ec5a --- /dev/null +++ b/arch/arm/mach-bcm/bcm63xx_pmb.c @@ -0,0 +1,221 @@ +/* + * Broadcom BCM63138 PMB initialization for secondary CPU(s) + * + * Copyright (C) 2015 Broadcom Corporation + * Author: Florian Fainelli <f.fainelli@gmail.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ +#include <linux/kernel.h> +#include <linux/io.h> +#include <linux/spinlock.h> +#include <linux/reset/bcm63xx_pmb.h> +#include <linux/of.h> +#include <linux/of_address.h> + +#include "bcm63xx_smp.h" + +/* ARM Control register definitions */ +#define CORE_PWR_CTRL_SHIFT 0 +#define CORE_PWR_CTRL_MASK 0x3 +#define PLL_PWR_ON BIT(8) +#define PLL_LDO_PWR_ON BIT(9) +#define PLL_CLAMP_ON BIT(10) +#define CPU_RESET_N(x) BIT(13 + (x)) +#define NEON_RESET_N BIT(15) +#define PWR_CTRL_STATUS_SHIFT 28 +#define PWR_CTRL_STATUS_MASK 0x3 +#define PWR_DOWN_SHIFT 30 +#define PWR_DOWN_MASK 0x3 + +/* CPU Power control register definitions */ +#define MEM_PWR_OK BIT(0) +#define MEM_PWR_ON BIT(1) +#define MEM_CLAMP_ON BIT(2) +#define MEM_PWR_OK_STATUS BIT(4) +#define MEM_PWR_ON_STATUS BIT(5) +#define MEM_PDA_SHIFT 8 +#define MEM_PDA_MASK 0xf +#define MEM_PDA_CPU_MASK 0x1 +#define MEM_PDA_NEON_MASK 0xf +#define CLAMP_ON BIT(15) +#define PWR_OK_SHIFT 16 +#define PWR_OK_MASK 0xf +#define PWR_ON_SHIFT 20 +#define PWR_CPU_MASK 0x03 +#define PWR_NEON_MASK 0x01 +#define PWR_ON_MASK 0xf +#define PWR_OK_STATUS_SHIFT 24 +#define PWR_OK_STATUS_MASK 0xf +#define PWR_ON_STATUS_SHIFT 28 +#define PWR_ON_STATUS_MASK 0xf + +#define ARM_CONTROL 0x30 +#define ARM_PWR_CONTROL_BASE 0x34 +#define ARM_PWR_CONTROL(x) (ARM_PWR_CONTROL_BASE + (x) * 0x4) +#define ARM_NEON_L2 0x3c + +/* Perform a value write, then spin until the value shifted by + * shift is seen, masked with mask and is different from cond. + */ +static int bpcm_wr_rd_mask(void __iomem *master, + unsigned int addr, u32 off, u32 *val, + u32 shift, u32 mask, u32 cond) +{ + int ret; + + ret = bpcm_wr(master, addr, off, *val); + if (ret) + return ret; + + do { + ret = bpcm_rd(master, addr, off, val); + if (ret) + return ret; + + cpu_relax(); + } while (((*val >> shift) & mask) != cond); + + return ret; +} + +/* Global lock to serialize accesses to the PMB registers while we + * are bringing up the secondary CPU + */ +static DEFINE_SPINLOCK(pmb_lock); + +static int bcm63xx_pmb_get_resources(struct device_node *dn, + void __iomem **base, + unsigned int *cpu, + unsigned int *addr) +{ + struct device_node *pmb_dn; + struct of_phandle_args args; + int ret; + + ret = of_property_read_u32(dn, "reg", cpu); + if (ret) { + pr_err("CPU is missing a reg node\n"); + return ret; + } + + ret = of_parse_phandle_with_args(dn, "resets", "#reset-cells", + 0, &args); + if (ret) { + pr_err("CPU is missing a resets phandle\n"); + return ret; + } + + pmb_dn = args.np; + if (args.args_count != 2) { + pr_err("reset-controller does not conform to reset-cells\n"); + return -EINVAL; + } + + *base = of_iomap(args.np, 0); + if (!*base) { + pr_err("failed remapping PMB register\n"); + return -ENOMEM; + } + + /* We do not need the number of zones */ + *addr = args.args[0]; + + return 0; +} + +int bcm63xx_pmb_power_on_cpu(struct device_node *dn) +{ + void __iomem *base; + unsigned int cpu, addr; + unsigned long flags; + u32 val, ctrl; + int ret; + + ret = bcm63xx_pmb_get_resources(dn, &base, &cpu, &addr); + if (ret) + return ret; + + /* We would not know how to enable a third and greater CPU */ + WARN_ON(cpu > 1); + + spin_lock_irqsave(&pmb_lock, flags); + + /* Check if the CPU is already on and save the ARM_CONTROL register + * value since we will use it later for CPU de-assert once done with + * the CPU-specific power sequence + */ + ret = bpcm_rd(base, addr, ARM_CONTROL, &ctrl); + if (ret) + goto out; + + if (ctrl & CPU_RESET_N(cpu)) { + pr_info("PMB: CPU%d is already powered on\n", cpu); + ret = 0; + goto out; + } + + /* Power on PLL */ + ret = bpcm_rd(base, addr, ARM_PWR_CONTROL(cpu), &val); + if (ret) + goto out; + + val |= (PWR_CPU_MASK << PWR_ON_SHIFT); + + ret = bpcm_wr_rd_mask(base, addr, ARM_PWR_CONTROL(cpu), &val, + PWR_ON_STATUS_SHIFT, PWR_CPU_MASK, PWR_CPU_MASK); + if (ret) + goto out; + + val |= (PWR_CPU_MASK << PWR_OK_SHIFT); + + ret = bpcm_wr_rd_mask(base, addr, ARM_PWR_CONTROL(cpu), &val, + PWR_OK_STATUS_SHIFT, PWR_CPU_MASK, PWR_CPU_MASK); + if (ret) + goto out; + + val &= ~CLAMP_ON; + + ret = bpcm_wr(base, addr, ARM_PWR_CONTROL(cpu), val); + if (ret) + goto out; + + /* Power on CPU<N> RAM */ + val &= ~(MEM_PDA_MASK << MEM_PDA_SHIFT); + + ret = bpcm_wr(base, addr, ARM_PWR_CONTROL(cpu), val); + if (ret) + goto out; + + val |= MEM_PWR_ON; + + ret = bpcm_wr_rd_mask(base, addr, ARM_PWR_CONTROL(cpu), &val, + 0, MEM_PWR_ON_STATUS, MEM_PWR_ON_STATUS); + if (ret) + goto out; + + val |= MEM_PWR_OK; + + ret = bpcm_wr_rd_mask(base, addr, ARM_PWR_CONTROL(cpu), &val, + 0, MEM_PWR_OK_STATUS, MEM_PWR_OK_STATUS); + if (ret) + goto out; + + val &= ~MEM_CLAMP_ON; + + ret = bpcm_wr(base, addr, ARM_PWR_CONTROL(cpu), val); + if (ret) + goto out; + + /* De-assert CPU reset */ + ctrl |= CPU_RESET_N(cpu); + + ret = bpcm_wr(base, addr, ARM_CONTROL, ctrl); +out: + spin_unlock_irqrestore(&pmb_lock, flags); + iounmap(base); + return ret; +} diff --git a/arch/arm/mach-bcm/bcm63xx_smp.c b/arch/arm/mach-bcm/bcm63xx_smp.c new file mode 100644 index 000000000..3f014f18c --- /dev/null +++ b/arch/arm/mach-bcm/bcm63xx_smp.c @@ -0,0 +1,169 @@ +/* + * Broadcom BCM63138 DSL SoCs SMP support code + * + * Copyright (C) 2015, Broadcom Corporation + * + * Licensed under the terms of the GPLv2 + */ + +#include <linux/delay.h> +#include <linux/init.h> +#include <linux/smp.h> +#include <linux/io.h> +#include <linux/of.h> +#include <linux/of_address.h> + +#include <asm/cacheflush.h> +#include <asm/smp_scu.h> +#include <asm/smp_plat.h> +#include <asm/vfp.h> + +#include "bcm63xx_smp.h" + +/* Size of mapped Cortex A9 SCU address space */ +#define CORTEX_A9_SCU_SIZE 0x58 + +/* + * Enable the Cortex A9 Snoop Control Unit + * + * By the time this is called we already know there are multiple + * cores present. We assume we're running on a Cortex A9 processor, + * so any trouble getting the base address register or getting the + * SCU base is a problem. + * + * Return 0 if successful or an error code otherwise. + */ +static int __init scu_a9_enable(void) +{ + unsigned long config_base; + void __iomem *scu_base; + unsigned int i, ncores; + + if (!scu_a9_has_base()) { + pr_err("no configuration base address register!\n"); + return -ENXIO; + } + + /* Config base address register value is zero for uniprocessor */ + config_base = scu_a9_get_base(); + if (!config_base) { + pr_err("hardware reports only one core\n"); + return -ENOENT; + } + + scu_base = ioremap((phys_addr_t)config_base, CORTEX_A9_SCU_SIZE); + if (!scu_base) { + pr_err("failed to remap config base (%lu/%u) for SCU\n", + config_base, CORTEX_A9_SCU_SIZE); + return -ENOMEM; + } + + scu_enable(scu_base); + + ncores = scu_base ? scu_get_core_count(scu_base) : 1; + + if (ncores > nr_cpu_ids) { + pr_warn("SMP: %u cores greater than maximum (%u), clipping\n", + ncores, nr_cpu_ids); + ncores = nr_cpu_ids; + } + + /* The BCM63138 SoC has two Cortex-A9 CPUs, CPU0 features a complete + * and fully functional VFP unit that can be used, but CPU1 does not. + * Since we will not be able to trap kernel-mode NEON to force + * migration to CPU0, just do not advertise VFP support at all. + * + * This will make vfp_init bail out and do not attempt to use VFP at + * all, for kernel-mode NEON, we do not want to introduce any + * conditionals in hot-paths, so we just restrict the system to UP. + */ +#ifdef CONFIG_VFP + if (ncores > 1) { + pr_warn("SMP: secondary CPUs lack VFP unit, disabling VFP\n"); + vfp_disable(); + +#ifdef CONFIG_KERNEL_MODE_NEON + WARN(1, "SMP: kernel-mode NEON enabled, restricting to UP\n"); + ncores = 1; +#endif + } +#endif + + for (i = 0; i < ncores; i++) + set_cpu_possible(i, true); + + iounmap(scu_base); /* That's the last we'll need of this */ + + return 0; +} + +static const struct of_device_id bcm63138_bootlut_ids[] = { + { .compatible = "brcm,bcm63138-bootlut", }, + { /* sentinel */ }, +}; + +#define BOOTLUT_RESET_VECT 0x20 + +static int bcm63138_smp_boot_secondary(unsigned int cpu, + struct task_struct *idle) +{ + void __iomem *bootlut_base; + struct device_node *dn; + int ret = 0; + u32 val; + + dn = of_find_matching_node(NULL, bcm63138_bootlut_ids); + if (!dn) { + pr_err("SMP: unable to find bcm63138 boot LUT node\n"); + return -ENODEV; + } + + bootlut_base = of_iomap(dn, 0); + of_node_put(dn); + + if (!bootlut_base) { + pr_err("SMP: unable to remap boot LUT base register\n"); + return -ENOMEM; + } + + /* Locate the secondary CPU node */ + dn = of_get_cpu_node(cpu_logical_map(cpu), NULL); + if (!dn) { + pr_err("SMP: failed to locate secondary CPU%d node\n", cpu); + ret = -ENODEV; + goto out; + } + + /* Write the secondary init routine to the BootLUT reset vector */ + val = virt_to_phys(bcm63138_secondary_startup); + writel_relaxed(val, bootlut_base + BOOTLUT_RESET_VECT); + + /* Power up the core, will jump straight to its reset vector when we + * return + */ + ret = bcm63xx_pmb_power_on_cpu(dn); + if (ret) + goto out; +out: + iounmap(bootlut_base); + + return ret; +} + +static void __init bcm63138_smp_prepare_cpus(unsigned int max_cpus) +{ + int ret; + + ret = scu_a9_enable(); + if (ret) { + pr_warn("SMP: Cortex-A9 SCU setup failed\n"); + return; + } +} + +struct smp_operations bcm63138_smp_ops __initdata = { + .smp_prepare_cpus = bcm63138_smp_prepare_cpus, + .smp_boot_secondary = bcm63138_smp_boot_secondary, +}; + +CPU_METHOD_OF_DECLARE(bcm63138_smp, "brcm,bcm63138", &bcm63138_smp_ops); diff --git a/arch/arm/mach-bcm/bcm63xx_smp.h b/arch/arm/mach-bcm/bcm63xx_smp.h new file mode 100644 index 000000000..50b760445 --- /dev/null +++ b/arch/arm/mach-bcm/bcm63xx_smp.h @@ -0,0 +1,9 @@ +#ifndef __BCM63XX_SMP_H +#define __BCM63XX_SMP_H + +struct device_node; + +extern void bcm63138_secondary_startup(void); +extern int bcm63xx_pmb_power_on_cpu(struct device_node *dn); + +#endif /* __BCM63XX_SMP_H */ diff --git a/arch/arm/mach-bcm/bcm_5301x.c b/arch/arm/mach-bcm/bcm_5301x.c index e9bcbdbce..7aef92720 100644 --- a/arch/arm/mach-bcm/bcm_5301x.c +++ b/arch/arm/mach-bcm/bcm_5301x.c @@ -18,15 +18,16 @@ static bool first_fault = true; static int bcm5301x_abort_handler(unsigned long addr, unsigned int fsr, struct pt_regs *regs) { - if (fsr == 0x1c06 && first_fault) { + if ((fsr == 0x1406 || fsr == 0x1c06) && first_fault) { first_fault = false; /* - * These faults with code 0x1c06 happens for no good reason, - * possibly left over from the CFE boot loader. + * These faults with codes 0x1406 (BCM4709) or 0x1c06 happens + * for no good reason, possibly left over from the CFE boot + * loader. */ pr_warn("External imprecise Data abort at addr=%#lx, fsr=%#x ignored.\n", - addr, fsr); + addr, fsr); /* Returning non-zero causes fault display and panic */ return 0; diff --git a/arch/arm/mach-bcm/board_bcm2835.c b/arch/arm/mach-bcm/board_bcm2835.c index 70f2f3925..0f7b9eac3 100644 --- a/arch/arm/mach-bcm/board_bcm2835.c +++ b/arch/arm/mach-bcm/board_bcm2835.c @@ -12,7 +12,6 @@ * GNU General Public License for more details. */ -#include <linux/delay.h> #include <linux/init.h> #include <linux/irqchip.h> #include <linux/of_address.h> @@ -22,97 +21,10 @@ #include <asm/mach/arch.h> #include <asm/mach/map.h> -#define PM_RSTC 0x1c -#define PM_RSTS 0x20 -#define PM_WDOG 0x24 - -#define PM_PASSWORD 0x5a000000 -#define PM_RSTC_WRCFG_MASK 0x00000030 -#define PM_RSTC_WRCFG_FULL_RESET 0x00000020 -#define PM_RSTS_HADWRH_SET 0x00000040 - -#define BCM2835_PERIPH_PHYS 0x20000000 -#define BCM2835_PERIPH_VIRT 0xf0000000 -#define BCM2835_PERIPH_SIZE SZ_16M - -static void __iomem *wdt_regs; - -/* - * The machine restart method can be called from an atomic context so we won't - * be able to ioremap the regs then. - */ -static void bcm2835_setup_restart(void) -{ - struct device_node *np = of_find_compatible_node(NULL, NULL, - "brcm,bcm2835-pm-wdt"); - if (WARN(!np, "unable to setup watchdog restart")) - return; - - wdt_regs = of_iomap(np, 0); - WARN(!wdt_regs, "failed to remap watchdog regs"); -} - -static void bcm2835_restart(enum reboot_mode mode, const char *cmd) -{ - u32 val; - - if (!wdt_regs) - return; - - /* use a timeout of 10 ticks (~150us) */ - writel_relaxed(10 | PM_PASSWORD, wdt_regs + PM_WDOG); - val = readl_relaxed(wdt_regs + PM_RSTC); - val &= ~PM_RSTC_WRCFG_MASK; - val |= PM_PASSWORD | PM_RSTC_WRCFG_FULL_RESET; - writel_relaxed(val, wdt_regs + PM_RSTC); - - /* No sleeping, possibly atomic. */ - mdelay(1); -} - -/* - * We can't really power off, but if we do the normal reset scheme, and - * indicate to bootcode.bin not to reboot, then most of the chip will be - * powered off. - */ -static void bcm2835_power_off(void) -{ - u32 val; - - /* - * We set the watchdog hard reset bit here to distinguish this reset - * from the normal (full) reset. bootcode.bin will not reboot after a - * hard reset. - */ - val = readl_relaxed(wdt_regs + PM_RSTS); - val &= ~PM_RSTC_WRCFG_MASK; - val |= PM_PASSWORD | PM_RSTS_HADWRH_SET; - writel_relaxed(val, wdt_regs + PM_RSTS); - - /* Continue with normal reset mechanism */ - bcm2835_restart(REBOOT_HARD, ""); -} - -static struct map_desc io_map __initdata = { - .virtual = BCM2835_PERIPH_VIRT, - .pfn = __phys_to_pfn(BCM2835_PERIPH_PHYS), - .length = BCM2835_PERIPH_SIZE, - .type = MT_DEVICE -}; - -static void __init bcm2835_map_io(void) -{ - iotable_init(&io_map, 1); -} - static void __init bcm2835_init(void) { int ret; - bcm2835_setup_restart(); - if (wdt_regs) - pm_power_off = bcm2835_power_off; - bcm2835_init_clocks(); ret = of_platform_populate(NULL, of_default_bus_match_table, NULL, @@ -129,9 +41,6 @@ static const char * const bcm2835_compat[] = { }; DT_MACHINE_START(BCM2835, "BCM2835") - .map_io = bcm2835_map_io, - .init_irq = irqchip_init, .init_machine = bcm2835_init, - .restart = bcm2835_restart, .dt_compat = bcm2835_compat MACHINE_END diff --git a/arch/arm/mach-bcm/brcmstb.h b/arch/arm/mach-bcm/brcmstb.h deleted file mode 100644 index ec0c3d112..000000000 --- a/arch/arm/mach-bcm/brcmstb.h +++ /dev/null @@ -1,19 +0,0 @@ -/* - * Copyright (C) 2013-2014 Broadcom Corporation - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation version 2. - * - * This program is distributed "as is" WITHOUT ANY WARRANTY of any - * kind, whether express or implied; without even the implied warranty - * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#ifndef __BRCMSTB_H__ -#define __BRCMSTB_H__ - -void brcmstb_secondary_startup(void); - -#endif /* __BRCMSTB_H__ */ diff --git a/arch/arm/mach-bcm/headsmp-brcmstb.S b/arch/arm/mach-bcm/headsmp-brcmstb.S deleted file mode 100644 index 199c1ea58..000000000 --- a/arch/arm/mach-bcm/headsmp-brcmstb.S +++ /dev/null @@ -1,33 +0,0 @@ -/* - * SMP boot code for secondary CPUs - * Based on arch/arm/mach-tegra/headsmp.S - * - * Copyright (C) 2010 NVIDIA, Inc. - * Copyright (C) 2013-2014 Broadcom Corporation - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation version 2. - * - * This program is distributed "as is" WITHOUT ANY WARRANTY of any - * kind, whether express or implied; without even the implied warranty - * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#include <asm/assembler.h> -#include <linux/linkage.h> -#include <linux/init.h> - - .section ".text.head", "ax" - -ENTRY(brcmstb_secondary_startup) - /* - * Ensure CPU is in a sane state by disabling all IRQs and switching - * into SVC mode. - */ - setmode PSR_I_BIT | PSR_F_BIT | SVC_MODE, r0 - - bl v7_invalidate_l1 - b secondary_startup -ENDPROC(brcmstb_secondary_startup) diff --git a/arch/arm/mach-bcm/platsmp-brcmstb.c b/arch/arm/mach-bcm/platsmp-brcmstb.c index e209e6fc7..44d6bddf7 100644 --- a/arch/arm/mach-bcm/platsmp-brcmstb.c +++ b/arch/arm/mach-bcm/platsmp-brcmstb.c @@ -30,8 +30,6 @@ #include <asm/mach-types.h> #include <asm/smp_plat.h> -#include "brcmstb.h" - enum { ZONE_MAN_CLKEN_MASK = BIT(0), ZONE_MAN_RESET_CNTL_MASK = BIT(1), @@ -153,7 +151,7 @@ static void brcmstb_cpu_boot(u32 cpu) * Set the reset vector to point to the secondary_startup * routine */ - cpu_set_boot_addr(cpu, virt_to_phys(brcmstb_secondary_startup)); + cpu_set_boot_addr(cpu, virt_to_phys(secondary_startup)); /* Unhalt the cpu */ cpu_rst_cfg_set(cpu, 0); diff --git a/arch/arm/mach-berlin/Kconfig b/arch/arm/mach-berlin/Kconfig index 3e40a947f..742d53a5f 100644 --- a/arch/arm/mach-berlin/Kconfig +++ b/arch/arm/mach-berlin/Kconfig @@ -6,6 +6,7 @@ menuconfig ARCH_BERLIN select DW_APB_ICTL select DW_APB_TIMER_OF select GENERIC_IRQ_CHIP + select MFD_SYSCON select PINCTRL if ARCH_BERLIN diff --git a/arch/arm/mach-berlin/headsmp.S b/arch/arm/mach-berlin/headsmp.S index 4a4c56a58..dc82a3486 100644 --- a/arch/arm/mach-berlin/headsmp.S +++ b/arch/arm/mach-berlin/headsmp.S @@ -12,12 +12,6 @@ #include <linux/init.h> #include <asm/assembler.h> -ENTRY(berlin_secondary_startup) - ARM_BE8(setend be) - bl v7_invalidate_l1 - b secondary_startup -ENDPROC(berlin_secondary_startup) - /* * If the following instruction is set in the reset exception vector, CPUs * will fetch the value of the software reset address vector when being diff --git a/arch/arm/mach-berlin/platsmp.c b/arch/arm/mach-berlin/platsmp.c index 702e79820..34a3753e7 100644 --- a/arch/arm/mach-berlin/platsmp.c +++ b/arch/arm/mach-berlin/platsmp.c @@ -22,7 +22,6 @@ #define RESET_VECT 0x00 #define SW_RESET_ADDR 0x94 -extern void berlin_secondary_startup(void); extern u32 boot_inst; static void __iomem *cpu_ctrl; @@ -85,7 +84,7 @@ static void __init berlin_smp_prepare_cpus(unsigned int max_cpus) * Write the secondary startup address into the SW reset address * vector. This is used by boot_inst. */ - writel(virt_to_phys(berlin_secondary_startup), vectors_base + SW_RESET_ADDR); + writel(virt_to_phys(secondary_startup), vectors_base + SW_RESET_ADDR); iounmap(vectors_base); unmap_scu: diff --git a/arch/arm/mach-davinci/da850.c b/arch/arm/mach-davinci/da850.c index 45ce065e7..3b8740c08 100644 --- a/arch/arm/mach-davinci/da850.c +++ b/arch/arm/mach-davinci/da850.c @@ -11,6 +11,7 @@ * is licensed "as is" without any warranty of any kind, whether express * or implied. */ +#include <linux/clkdev.h> #include <linux/gpio.h> #include <linux/init.h> #include <linux/clk.h> diff --git a/arch/arm/mach-davinci/include/mach/da8xx.h b/arch/arm/mach-davinci/include/mach/da8xx.h index 39e58b48e..f9f9713aa 100644 --- a/arch/arm/mach-davinci/include/mach/da8xx.h +++ b/arch/arm/mach-davinci/include/mach/da8xx.h @@ -36,7 +36,7 @@ extern void __iomem *da8xx_syscfg1_base; /* * If the DA850/OMAP-L138/AM18x SoC on board is of a higher speed grade - * (than the regular 300Mhz variant), the board code should set this up + * (than the regular 300MHz variant), the board code should set this up * with the supported speed before calling da850_register_cpufreq(). */ extern unsigned int da850_max_speed; diff --git a/arch/arm/mach-davinci/pm_domain.c b/arch/arm/mach-davinci/pm_domain.c index 641edc313..78eac2c0c 100644 --- a/arch/arm/mach-davinci/pm_domain.c +++ b/arch/arm/mach-davinci/pm_domain.c @@ -14,39 +14,9 @@ #include <linux/pm_clock.h> #include <linux/platform_device.h> -#ifdef CONFIG_PM -static int davinci_pm_runtime_suspend(struct device *dev) -{ - int ret; - - dev_dbg(dev, "%s\n", __func__); - - ret = pm_generic_runtime_suspend(dev); - if (ret) - return ret; - - ret = pm_clk_suspend(dev); - if (ret) { - pm_generic_runtime_resume(dev); - return ret; - } - - return 0; -} - -static int davinci_pm_runtime_resume(struct device *dev) -{ - dev_dbg(dev, "%s\n", __func__); - - pm_clk_resume(dev); - return pm_generic_runtime_resume(dev); -} -#endif - static struct dev_pm_domain davinci_pm_domain = { .ops = { - SET_RUNTIME_PM_OPS(davinci_pm_runtime_suspend, - davinci_pm_runtime_resume, NULL) + USE_PM_CLK_RUNTIME_OPS USE_PLATFORM_PM_SLEEP_OPS }, }; diff --git a/arch/arm/mach-ep93xx/simone.c b/arch/arm/mach-ep93xx/simone.c index 36f22c1a3..3c950f586 100644 --- a/arch/arm/mach-ep93xx/simone.c +++ b/arch/arm/mach-ep93xx/simone.c @@ -20,9 +20,14 @@ #include <linux/platform_device.h> #include <linux/i2c.h> #include <linux/i2c-gpio.h> +#include <linux/mmc/host.h> +#include <linux/spi/spi.h> +#include <linux/spi/mmc_spi.h> +#include <linux/platform_data/video-ep93xx.h> +#include <linux/platform_data/spi-ep93xx.h> +#include <linux/gpio.h> #include <mach/hardware.h> -#include <linux/platform_data/video-ep93xx.h> #include <mach/gpio-ep93xx.h> #include <asm/mach-types.h> @@ -40,6 +45,132 @@ static struct ep93xxfb_mach_info __initdata simone_fb_info = { .flags = EP93XXFB_USE_SDCSN0 | EP93XXFB_PCLK_FALLING, }; +/* + * GPIO lines used for MMC card detection. + */ +#define MMC_CARD_DETECT_GPIO EP93XX_GPIO_LINE_EGPIO0 + +/* + * Up to v1.3, the Sim.One used SFRMOUT as SD card chip select, but this goes + * low between multi-message command blocks. From v1.4, it uses a GPIO instead. + * v1.3 parts will still work, since the signal on SFRMOUT is automatic. + */ +#define MMC_CHIP_SELECT_GPIO EP93XX_GPIO_LINE_EGPIO1 + +/* + * MMC SPI chip select GPIO handling. If you are using SFRMOUT (SFRM1) signal, + * you can leave these empty and pass NULL as .controller_data. + */ + +static int simone_mmc_spi_setup(struct spi_device *spi) +{ + unsigned int gpio = MMC_CHIP_SELECT_GPIO; + int err; + + err = gpio_request(gpio, spi->modalias); + if (err) + return err; + + err = gpio_direction_output(gpio, 1); + if (err) { + gpio_free(gpio); + return err; + } + + return 0; +} + +static void simone_mmc_spi_cleanup(struct spi_device *spi) +{ + unsigned int gpio = MMC_CHIP_SELECT_GPIO; + + gpio_set_value(gpio, 1); + gpio_direction_input(gpio); + gpio_free(gpio); +} + +static void simone_mmc_spi_cs_control(struct spi_device *spi, int value) +{ + gpio_set_value(MMC_CHIP_SELECT_GPIO, value); +} + +static struct ep93xx_spi_chip_ops simone_mmc_spi_ops = { + .setup = simone_mmc_spi_setup, + .cleanup = simone_mmc_spi_cleanup, + .cs_control = simone_mmc_spi_cs_control, +}; + +/* + * MMC card detection GPIO setup. + */ + +static int simone_mmc_spi_init(struct device *dev, + irqreturn_t (*irq_handler)(int, void *), void *mmc) +{ + unsigned int gpio = MMC_CARD_DETECT_GPIO; + int irq, err; + + err = gpio_request(gpio, dev_name(dev)); + if (err) + return err; + + err = gpio_direction_input(gpio); + if (err) + goto fail; + + irq = gpio_to_irq(gpio); + if (irq < 0) + goto fail; + + err = request_irq(irq, irq_handler, IRQF_TRIGGER_FALLING, + "MMC card detect", mmc); + if (err) + goto fail; + + printk(KERN_INFO "%s: using irq %d for MMC card detection\n", + dev_name(dev), irq); + + return 0; +fail: + gpio_free(gpio); + return err; +} + +static void simone_mmc_spi_exit(struct device *dev, void *mmc) +{ + unsigned int gpio = MMC_CARD_DETECT_GPIO; + + free_irq(gpio_to_irq(gpio), mmc); + gpio_free(gpio); +} + +static struct mmc_spi_platform_data simone_mmc_spi_data = { + .init = simone_mmc_spi_init, + .exit = simone_mmc_spi_exit, + .detect_delay = 500, + .ocr_mask = MMC_VDD_32_33 | MMC_VDD_33_34, +}; + +static struct spi_board_info simone_spi_devices[] __initdata = { + { + .modalias = "mmc_spi", + .controller_data = &simone_mmc_spi_ops, + .platform_data = &simone_mmc_spi_data, + /* + * We use 10 MHz even though the maximum is 3.7 MHz. The driver + * will limit it automatically to max. frequency. + */ + .max_speed_hz = 10 * 1000 * 1000, + .bus_num = 0, + .chip_select = 0, + .mode = SPI_MODE_3, + }, +}; + +static struct ep93xx_spi_info simone_spi_info __initdata = { + .num_chipselect = ARRAY_SIZE(simone_spi_devices), +}; + static struct i2c_gpio_platform_data __initdata simone_i2c_gpio_data = { .sda_pin = EP93XX_GPIO_LINE_EEDAT, .sda_is_open_drain = 0, @@ -74,6 +205,8 @@ static void __init simone_init_machine(void) ep93xx_register_fb(&simone_fb_info); ep93xx_register_i2c(&simone_i2c_gpio_data, simone_i2c_board_info, ARRAY_SIZE(simone_i2c_board_info)); + ep93xx_register_spi(&simone_spi_info, simone_spi_devices, + ARRAY_SIZE(simone_spi_devices)); simone_register_audio(); } diff --git a/arch/arm/mach-exynos/common.h b/arch/arm/mach-exynos/common.h index 5f5cd562c..e3a9256ed 100644 --- a/arch/arm/mach-exynos/common.h +++ b/arch/arm/mach-exynos/common.h @@ -163,7 +163,9 @@ extern void exynos_set_delayed_reset_assertion(bool enable); extern void s5p_init_cpu(void __iomem *cpuid_addr); extern unsigned int samsung_rev(void); -extern void __iomem *cpu_boot_reg_base(void); +extern void exynos_core_restart(u32 core_id); +extern int exynos_set_boot_addr(u32 core_id, unsigned long boot_addr); +extern int exynos_get_boot_addr(u32 core_id, unsigned long *boot_addr); static inline void pmu_raw_writel(u32 val, u32 offset) { diff --git a/arch/arm/mach-exynos/exynos.c b/arch/arm/mach-exynos/exynos.c index 5917a30ee..5f8ddcdee 100644 --- a/arch/arm/mach-exynos/exynos.c +++ b/arch/arm/mach-exynos/exynos.c @@ -224,6 +224,25 @@ static void __init exynos_init_irq(void) exynos_map_pmu(); } +static const struct of_device_id exynos_cpufreq_matches[] = { + { .compatible = "samsung,exynos4210", .data = "cpufreq-dt" }, + { /* sentinel */ } +}; + +static void __init exynos_cpufreq_init(void) +{ + struct device_node *root = of_find_node_by_path("/"); + const struct of_device_id *match; + + match = of_match_node(exynos_cpufreq_matches, root); + if (!match) { + platform_device_register_simple("exynos-cpufreq", -1, NULL, 0); + return; + } + + platform_device_register_simple(match->data, -1, NULL, 0); +} + static void __init exynos_dt_machine_init(void) { /* @@ -234,7 +253,8 @@ static void __init exynos_dt_machine_init(void) exynos_sysram_init(); #if defined(CONFIG_SMP) && defined(CONFIG_ARM_EXYNOS_CPUIDLE) - if (of_machine_is_compatible("samsung,exynos4210")) + if (of_machine_is_compatible("samsung,exynos4210") || + of_machine_is_compatible("samsung,exynos3250")) exynos_cpuidle.dev.platform_data = &cpuidle_coupled_exynos_data; #endif if (of_machine_is_compatible("samsung,exynos4210") || @@ -245,7 +265,7 @@ static void __init exynos_dt_machine_init(void) of_machine_is_compatible("samsung,exynos5250")) platform_device_register(&exynos_cpuidle); - platform_device_register_simple("exynos-cpufreq", -1, NULL, 0); + exynos_cpufreq_init(); of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL); } diff --git a/arch/arm/mach-exynos/firmware.c b/arch/arm/mach-exynos/firmware.c index 1bd35763f..245f6dec1 100644 --- a/arch/arm/mach-exynos/firmware.c +++ b/arch/arm/mach-exynos/firmware.c @@ -49,6 +49,7 @@ static int exynos_do_idle(unsigned long mode) sysram_ns_base_addr + 0x24); __raw_writel(EXYNOS_AFTR_MAGIC, sysram_ns_base_addr + 0x20); if (soc_is_exynos3250()) { + flush_cache_all(); exynos_smc(SMC_CMD_SAVE, OP_TYPE_CORE, SMC_POWERSTATE_IDLE, 0); exynos_smc(SMC_CMD_SHUTDOWN, OP_TYPE_CLUSTER, @@ -104,6 +105,22 @@ static int exynos_set_cpu_boot_addr(int cpu, unsigned long boot_addr) return 0; } +static int exynos_get_cpu_boot_addr(int cpu, unsigned long *boot_addr) +{ + void __iomem *boot_reg; + + if (!sysram_ns_base_addr) + return -ENODEV; + + boot_reg = sysram_ns_base_addr + 0x1c; + + if (soc_is_exynos4412()) + boot_reg += 4 * cpu; + + *boot_addr = __raw_readl(boot_reg); + return 0; +} + static int exynos_cpu_suspend(unsigned long arg) { flush_cache_all(); @@ -138,6 +155,7 @@ static int exynos_resume(void) static const struct firmware_ops exynos_firmware_ops = { .do_idle = IS_ENABLED(CONFIG_EXYNOS_CPU_SUSPEND) ? exynos_do_idle : NULL, .set_cpu_boot_addr = exynos_set_cpu_boot_addr, + .get_cpu_boot_addr = exynos_get_cpu_boot_addr, .cpu_boot = exynos_cpu_boot, .suspend = IS_ENABLED(CONFIG_PM_SLEEP) ? exynos_suspend : NULL, .resume = IS_ENABLED(CONFIG_EXYNOS_CPU_SUSPEND) ? exynos_resume : NULL, diff --git a/arch/arm/mach-exynos/platsmp.c b/arch/arm/mach-exynos/platsmp.c index a825bca2a..58e05a2ea 100644 --- a/arch/arm/mach-exynos/platsmp.c +++ b/arch/arm/mach-exynos/platsmp.c @@ -169,7 +169,7 @@ int exynos_cluster_power_state(int cluster) S5P_CORE_LOCAL_PWR_EN); } -void __iomem *cpu_boot_reg_base(void) +static void __iomem *cpu_boot_reg_base(void) { if (soc_is_exynos4210() && samsung_rev() == EXYNOS4210_REV_1_1) return pmu_base_addr + S5P_INFORM5; @@ -195,7 +195,7 @@ static inline void __iomem *cpu_boot_reg(int cpu) * * Currently this is needed only when booting secondary CPU on Exynos3250. */ -static void exynos_core_restart(u32 core_id) +void exynos_core_restart(u32 core_id) { u32 val; @@ -210,7 +210,6 @@ static void exynos_core_restart(u32 core_id) val |= S5P_CORE_WAKEUP_FROM_LOCAL_CFG; pmu_raw_writel(val, EXYNOS_ARM_CORE_STATUS(core_id)); - pr_info("CPU%u: Software reset\n", core_id); pmu_raw_writel(EXYNOS_CORE_PO_RESET(core_id), EXYNOS_SWRESET); } @@ -248,6 +247,56 @@ static void exynos_secondary_init(unsigned int cpu) spin_unlock(&boot_lock); } +int exynos_set_boot_addr(u32 core_id, unsigned long boot_addr) +{ + int ret; + + /* + * Try to set boot address using firmware first + * and fall back to boot register if it fails. + */ + ret = call_firmware_op(set_cpu_boot_addr, core_id, boot_addr); + if (ret && ret != -ENOSYS) + goto fail; + if (ret == -ENOSYS) { + void __iomem *boot_reg = cpu_boot_reg(core_id); + + if (IS_ERR(boot_reg)) { + ret = PTR_ERR(boot_reg); + goto fail; + } + __raw_writel(boot_addr, boot_reg); + ret = 0; + } +fail: + return ret; +} + +int exynos_get_boot_addr(u32 core_id, unsigned long *boot_addr) +{ + int ret; + + /* + * Try to get boot address using firmware first + * and fall back to boot register if it fails. + */ + ret = call_firmware_op(get_cpu_boot_addr, core_id, boot_addr); + if (ret && ret != -ENOSYS) + goto fail; + if (ret == -ENOSYS) { + void __iomem *boot_reg = cpu_boot_reg(core_id); + + if (IS_ERR(boot_reg)) { + ret = PTR_ERR(boot_reg); + goto fail; + } + *boot_addr = __raw_readl(boot_reg); + ret = 0; + } +fail: + return ret; +} + static int exynos_boot_secondary(unsigned int cpu, struct task_struct *idle) { unsigned long timeout; @@ -307,22 +356,9 @@ static int exynos_boot_secondary(unsigned int cpu, struct task_struct *idle) boot_addr = virt_to_phys(exynos4_secondary_startup); - /* - * Try to set boot address using firmware first - * and fall back to boot register if it fails. - */ - ret = call_firmware_op(set_cpu_boot_addr, core_id, boot_addr); - if (ret && ret != -ENOSYS) + ret = exynos_set_boot_addr(core_id, boot_addr); + if (ret) goto fail; - if (ret == -ENOSYS) { - void __iomem *boot_reg = cpu_boot_reg(core_id); - - if (IS_ERR(boot_reg)) { - ret = PTR_ERR(boot_reg); - goto fail; - } - __raw_writel(boot_addr, boot_reg); - } call_firmware_op(cpu_boot, core_id); @@ -337,6 +373,9 @@ static int exynos_boot_secondary(unsigned int cpu, struct task_struct *idle) udelay(10); } + if (pen_release != -1) + ret = -ETIMEDOUT; + /* * now the secondary core is starting up let it run its * calibrations, then wait for it to finish @@ -407,16 +446,9 @@ static void __init exynos_smp_prepare_cpus(unsigned int max_cpus) core_id = MPIDR_AFFINITY_LEVEL(mpidr, 0); boot_addr = virt_to_phys(exynos4_secondary_startup); - ret = call_firmware_op(set_cpu_boot_addr, core_id, boot_addr); - if (ret && ret != -ENOSYS) + ret = exynos_set_boot_addr(core_id, boot_addr); + if (ret) break; - if (ret == -ENOSYS) { - void __iomem *boot_reg = cpu_boot_reg(core_id); - - if (IS_ERR(boot_reg)) - break; - __raw_writel(boot_addr, boot_reg); - } } } diff --git a/arch/arm/mach-exynos/pm.c b/arch/arm/mach-exynos/pm.c index cc75ab448..9c1506b49 100644 --- a/arch/arm/mach-exynos/pm.c +++ b/arch/arm/mach-exynos/pm.c @@ -22,6 +22,7 @@ #include <asm/firmware.h> #include <asm/smp_scu.h> #include <asm/suspend.h> +#include <asm/cacheflush.h> #include <mach/map.h> @@ -209,6 +210,8 @@ static int exynos_cpu0_enter_aftr(void) * sequence, let's wait for one of these to happen */ while (exynos_cpu_power_state(1)) { + unsigned long boot_addr; + /* * The other cpu may skip idle and boot back * up again @@ -221,7 +224,11 @@ static int exynos_cpu0_enter_aftr(void) * boot back up again, getting stuck in the * boot rom code */ - if (__raw_readl(cpu_boot_reg_base()) == 0) + ret = exynos_get_boot_addr(1, &boot_addr); + if (ret) + goto fail; + ret = -1; + if (boot_addr == 0) goto abort; cpu_relax(); @@ -233,11 +240,14 @@ static int exynos_cpu0_enter_aftr(void) abort: if (cpu_online(1)) { + unsigned long boot_addr = virt_to_phys(exynos_cpu_resume); + /* * Set the boot vector to something non-zero */ - __raw_writel(virt_to_phys(exynos_cpu_resume), - cpu_boot_reg_base()); + ret = exynos_set_boot_addr(1, boot_addr); + if (ret) + goto fail; dsb(); /* @@ -247,22 +257,42 @@ abort: while (exynos_cpu_power_state(1) != S5P_CORE_LOCAL_PWR_EN) cpu_relax(); + if (soc_is_exynos3250()) { + while (!pmu_raw_readl(S5P_PMU_SPARE2) && + !atomic_read(&cpu1_wakeup)) + cpu_relax(); + + if (!atomic_read(&cpu1_wakeup)) + exynos_core_restart(1); + } + while (!atomic_read(&cpu1_wakeup)) { + smp_rmb(); + /* * Poke cpu1 out of the boot rom */ - __raw_writel(virt_to_phys(exynos_cpu_resume), - cpu_boot_reg_base()); - arch_send_wakeup_ipi_mask(cpumask_of(1)); + ret = exynos_set_boot_addr(1, boot_addr); + if (ret) + goto fail; + + call_firmware_op(cpu_boot, 1); + + if (soc_is_exynos3250()) + dsb_sev(); + else + arch_send_wakeup_ipi_mask(cpumask_of(1)); } } - +fail: return ret; } static int exynos_wfi_finisher(unsigned long flags) { + if (soc_is_exynos3250()) + flush_cache_all(); cpu_do_idle(); return -1; @@ -283,6 +313,9 @@ static int exynos_cpu1_powerdown(void) */ exynos_cpu_power_down(1); + if (soc_is_exynos3250()) + pmu_raw_writel(0, S5P_PMU_SPARE2); + ret = cpu_suspend(0, exynos_wfi_finisher); cpu_pm_exit(); @@ -299,7 +332,9 @@ cpu1_aborted: static void exynos_pre_enter_aftr(void) { - __raw_writel(virt_to_phys(exynos_cpu_resume), cpu_boot_reg_base()); + unsigned long boot_addr = virt_to_phys(exynos_cpu_resume); + + (void)exynos_set_boot_addr(1, boot_addr); } static void exynos_post_enter_aftr(void) diff --git a/arch/arm/mach-exynos/pm_domains.c b/arch/arm/mach-exynos/pm_domains.c index a9686535f..4a87e86de 100644 --- a/arch/arm/mach-exynos/pm_domains.c +++ b/arch/arm/mach-exynos/pm_domains.c @@ -62,6 +62,7 @@ static int exynos_pd_power(struct generic_pm_domain *domain, bool power_on) for (i = 0; i < MAX_CLK_PER_DOMAIN; i++) { if (IS_ERR(pd->clk[i])) break; + pd->pclk[i] = clk_get_parent(pd->clk[i]); if (clk_set_parent(pd->clk[i], pd->oscclk)) pr_err("%s: error setting oscclk as parent to clock %d\n", pd->name, i); @@ -90,6 +91,9 @@ static int exynos_pd_power(struct generic_pm_domain *domain, bool power_on) for (i = 0; i < MAX_CLK_PER_DOMAIN; i++) { if (IS_ERR(pd->clk[i])) break; + + if (IS_ERR(pd->clk[i])) + continue; /* Skip on first power up */ if (clk_set_parent(pd->clk[i], pd->pclk[i])) pr_err("%s: error setting parent to clock%d\n", pd->name, i); @@ -117,27 +121,36 @@ static int exynos_pd_power_off(struct generic_pm_domain *domain) static __init int exynos4_pm_init_power_domain(void) { - struct platform_device *pdev; struct device_node *np; for_each_compatible_node(np, NULL, "samsung,exynos4210-pd") { struct exynos_pm_domain *pd; int on, i; - struct device *dev; - - pdev = of_find_device_by_node(np); - dev = &pdev->dev; pd = kzalloc(sizeof(*pd), GFP_KERNEL); if (!pd) { pr_err("%s: failed to allocate memory for domain\n", __func__); + of_node_put(np); + return -ENOMEM; + } + pd->pd.name = kstrdup_const(strrchr(np->full_name, '/') + 1, + GFP_KERNEL); + if (!pd->pd.name) { + kfree(pd); + of_node_put(np); return -ENOMEM; } - pd->pd.name = kstrdup(dev_name(dev), GFP_KERNEL); pd->name = pd->pd.name; pd->base = of_iomap(np, 0); + if (!pd->base) { + pr_warn("%s: failed to map memory\n", __func__); + kfree_const(pd->pd.name); + kfree(pd); + continue; + } + pd->pd.power_off = exynos_pd_power_off; pd->pd.power_on = exynos_pd_power_on; @@ -145,12 +158,12 @@ static __init int exynos4_pm_init_power_domain(void) char clk_name[8]; snprintf(clk_name, sizeof(clk_name), "asb%d", i); - pd->asb_clk[i] = clk_get(dev, clk_name); + pd->asb_clk[i] = of_clk_get_by_name(np, clk_name); if (IS_ERR(pd->asb_clk[i])) break; } - pd->oscclk = clk_get(dev, "oscclk"); + pd->oscclk = of_clk_get_by_name(np, "oscclk"); if (IS_ERR(pd->oscclk)) goto no_clk; @@ -158,16 +171,14 @@ static __init int exynos4_pm_init_power_domain(void) char clk_name[8]; snprintf(clk_name, sizeof(clk_name), "clk%d", i); - pd->clk[i] = clk_get(dev, clk_name); + pd->clk[i] = of_clk_get_by_name(np, clk_name); if (IS_ERR(pd->clk[i])) break; - snprintf(clk_name, sizeof(clk_name), "pclk%d", i); - pd->pclk[i] = clk_get(dev, clk_name); - if (IS_ERR(pd->pclk[i])) { - clk_put(pd->clk[i]); - pd->clk[i] = ERR_PTR(-EINVAL); - break; - } + /* + * Skip setting parent on first power up. + * The parent at this time may not be useful at all. + */ + pd->pclk[i] = ERR_PTR(-EINVAL); } if (IS_ERR(pd->clk[0])) @@ -189,15 +200,15 @@ no_clk: args.args_count = 0; child_domain = of_genpd_get_from_provider(&args); if (IS_ERR(child_domain)) - continue; + goto next_pd; if (of_parse_phandle_with_args(np, "power-domains", "#power-domain-cells", 0, &args) != 0) - continue; + goto next_pd; parent_domain = of_genpd_get_from_provider(&args); if (IS_ERR(parent_domain)) - continue; + goto next_pd; if (pm_genpd_add_subdomain(parent_domain, child_domain)) pr_warn("%s failed to add subdomain: %s\n", @@ -205,9 +216,10 @@ no_clk: else pr_info("%s has as child subdomain: %s.\n", parent_domain->name, child_domain->name); +next_pd: of_node_put(np); } return 0; } -arch_initcall(exynos4_pm_init_power_domain); +core_initcall(exynos4_pm_init_power_domain); diff --git a/arch/arm/mach-exynos/pmu.c b/arch/arm/mach-exynos/pmu.c index c15761ca2..e812c1c85 100644 --- a/arch/arm/mach-exynos/pmu.c +++ b/arch/arm/mach-exynos/pmu.c @@ -681,7 +681,7 @@ static unsigned int const exynos5420_list_disable_pmu_reg[] = { EXYNOS5420_CMU_RESET_FSYS_SYS_PWR_REG, }; -static void exynos5_power_off(void) +static void exynos_power_off(void) { unsigned int tmp; @@ -872,8 +872,6 @@ static void exynos5420_pmu_init(void) EXYNOS5420_ARM_INTR_SPREAD_USE_STANDBYWFI); pmu_raw_writel(0x1, EXYNOS5420_UP_SCHEDULER); - - pm_power_off = exynos5_power_off; pr_info("EXYNOS5420 PMU initialized\n"); } @@ -984,6 +982,8 @@ static int exynos_pmu_probe(struct platform_device *pdev) if (ret) dev_warn(dev, "can't register restart handler err=%d\n", ret); + pm_power_off = exynos_power_off; + dev_dbg(dev, "Exynos PMU Driver probe done\n"); return 0; } diff --git a/arch/arm/mach-exynos/suspend.c b/arch/arm/mach-exynos/suspend.c index 7d23ce04c..f572219c7 100644 --- a/arch/arm/mach-exynos/suspend.c +++ b/arch/arm/mach-exynos/suspend.c @@ -223,7 +223,7 @@ static int exynos_pmu_domain_alloc(struct irq_domain *domain, return irq_domain_alloc_irqs_parent(domain, virq, nr_irqs, &parent_args); } -static struct irq_domain_ops exynos_pmu_domain_ops = { +static const struct irq_domain_ops exynos_pmu_domain_ops = { .xlate = exynos_pmu_domain_xlate, .alloc = exynos_pmu_domain_alloc, .free = irq_domain_free_irqs_common, @@ -311,13 +311,7 @@ static int exynos5420_cpu_suspend(unsigned long arg) if (IS_ENABLED(CONFIG_EXYNOS5420_MCPM)) { mcpm_set_entry_vector(cpu, cluster, exynos_cpu_resume); - - /* - * Residency value passed to mcpm_cpu_suspend back-end - * has to be given clear semantics. Set to 0 as a - * temporary value. - */ - mcpm_cpu_suspend(0); + mcpm_cpu_suspend(); } pr_info("Failed to suspend the system\n"); diff --git a/arch/arm/mach-footbridge/dma.c b/arch/arm/mach-footbridge/dma.c index e2e0df8bc..22536b85a 100644 --- a/arch/arm/mach-footbridge/dma.c +++ b/arch/arm/mach-footbridge/dma.c @@ -13,9 +13,9 @@ #include <linux/init.h> #include <linux/io.h> #include <linux/spinlock.h> +#include <linux/scatterlist.h> #include <asm/dma.h> -#include <asm/scatterlist.h> #include <asm/mach/dma.h> #include <asm/hardware/dec21285.h> diff --git a/arch/arm/mach-gemini/gpio.c b/arch/arm/mach-gemini/gpio.c index f8cb5710d..3292f2e6e 100644 --- a/arch/arm/mach-gemini/gpio.c +++ b/arch/arm/mach-gemini/gpio.c @@ -223,8 +223,8 @@ void __init gemini_gpio_init(void) set_irq_flags(j, IRQF_VALID); } - irq_set_chained_handler(IRQ_GPIO(i), gpio_irq_handler); - irq_set_handler_data(IRQ_GPIO(i), (void *)i); + irq_set_chained_handler_and_data(IRQ_GPIO(i), gpio_irq_handler, + (void *)i); } BUG_ON(gpiochip_add(&gemini_gpio_chip)); diff --git a/arch/arm/mach-hisi/Makefile b/arch/arm/mach-hisi/Makefile index 6b7b3033d..659db1933 100644 --- a/arch/arm/mach-hisi/Makefile +++ b/arch/arm/mach-hisi/Makefile @@ -6,4 +6,4 @@ CFLAGS_platmcpm.o := -march=armv7-a obj-y += hisilicon.o obj-$(CONFIG_MCPM) += platmcpm.o -obj-$(CONFIG_SMP) += platsmp.o hotplug.o headsmp.o +obj-$(CONFIG_SMP) += platsmp.o hotplug.o diff --git a/arch/arm/mach-hisi/core.h b/arch/arm/mach-hisi/core.h index 92a682d8e..c7648ef18 100644 --- a/arch/arm/mach-hisi/core.h +++ b/arch/arm/mach-hisi/core.h @@ -12,7 +12,6 @@ extern void hi3xxx_cpu_die(unsigned int cpu); extern int hi3xxx_cpu_kill(unsigned int cpu); extern void hi3xxx_set_cpu(int cpu, bool enable); -extern void hisi_secondary_startup(void); extern struct smp_operations hix5hd2_smp_ops; extern void hix5hd2_set_cpu(int cpu, bool enable); extern void hix5hd2_cpu_die(unsigned int cpu); diff --git a/arch/arm/mach-hisi/headsmp.S b/arch/arm/mach-hisi/headsmp.S deleted file mode 100644 index 81e35b159..000000000 --- a/arch/arm/mach-hisi/headsmp.S +++ /dev/null @@ -1,16 +0,0 @@ -/* - * Copyright (c) 2014 Hisilicon Limited. - * Copyright (c) 2014 Linaro Ltd. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ -#include <linux/linkage.h> -#include <linux/init.h> - - __CPUINIT - -ENTRY(hisi_secondary_startup) - bl v7_invalidate_l1 - b secondary_startup diff --git a/arch/arm/mach-hisi/platmcpm.c b/arch/arm/mach-hisi/platmcpm.c index 280f3f14f..b5f8f5ffd 100644 --- a/arch/arm/mach-hisi/platmcpm.c +++ b/arch/arm/mach-hisi/platmcpm.c @@ -6,6 +6,8 @@ * under the terms and conditions of the GNU General Public License, * version 2, as published by the Free Software Foundation. */ +#include <linux/init.h> +#include <linux/smp.h> #include <linux/delay.h> #include <linux/io.h> #include <linux/memblock.h> @@ -13,7 +15,9 @@ #include <asm/cputype.h> #include <asm/cp15.h> -#include <asm/mcpm.h> +#include <asm/cacheflush.h> +#include <asm/smp.h> +#include <asm/smp_plat.h> #include "core.h" @@ -94,11 +98,16 @@ static void hip04_set_snoop_filter(unsigned int cluster, unsigned int on) } while (data != readl_relaxed(fabric + FAB_SF_MODE)); } -static int hip04_mcpm_power_up(unsigned int cpu, unsigned int cluster) +static int hip04_boot_secondary(unsigned int l_cpu, struct task_struct *idle) { + unsigned int mpidr, cpu, cluster; unsigned long data; void __iomem *sys_dreq, *sys_status; + mpidr = cpu_logical_map(l_cpu); + cpu = MPIDR_AFFINITY_LEVEL(mpidr, 0); + cluster = MPIDR_AFFINITY_LEVEL(mpidr, 1); + if (!sysctrl) return -ENODEV; if (cluster >= HIP04_MAX_CLUSTERS || cpu >= HIP04_MAX_CPUS_PER_CLUSTER) @@ -118,6 +127,7 @@ static int hip04_mcpm_power_up(unsigned int cpu, unsigned int cluster) cpu_relax(); data = readl_relaxed(sys_status); } while (data & CLUSTER_DEBUG_RESET_STATUS); + hip04_set_snoop_filter(cluster, 1); } data = CORE_RESET_BIT(cpu) | NEON_RESET_BIT(cpu) | \ @@ -126,11 +136,15 @@ static int hip04_mcpm_power_up(unsigned int cpu, unsigned int cluster) do { cpu_relax(); } while (data == readl_relaxed(sys_status)); + /* * We may fail to power up core again without this delay. * It's not mentioned in document. It's found by test. */ udelay(20); + + arch_send_wakeup_ipi_mask(cpumask_of(l_cpu)); + out: hip04_cpu_table[cluster][cpu]++; spin_unlock_irq(&boot_lock); @@ -138,31 +152,30 @@ out: return 0; } -static void hip04_mcpm_power_down(void) +#ifdef CONFIG_HOTPLUG_CPU +static void hip04_cpu_die(unsigned int l_cpu) { unsigned int mpidr, cpu, cluster; - bool skip_wfi = false, last_man = false; + bool last_man; - mpidr = read_cpuid_mpidr(); + mpidr = cpu_logical_map(l_cpu); cpu = MPIDR_AFFINITY_LEVEL(mpidr, 0); cluster = MPIDR_AFFINITY_LEVEL(mpidr, 1); - __mcpm_cpu_going_down(cpu, cluster); - spin_lock(&boot_lock); - BUG_ON(__mcpm_cluster_state(cluster) != CLUSTER_UP); hip04_cpu_table[cluster][cpu]--; if (hip04_cpu_table[cluster][cpu] == 1) { /* A power_up request went ahead of us. */ - skip_wfi = true; + spin_unlock(&boot_lock); + return; } else if (hip04_cpu_table[cluster][cpu] > 1) { pr_err("Cluster %d CPU%d boots multiple times\n", cluster, cpu); BUG(); } last_man = hip04_cluster_is_down(cluster); - if (last_man && __mcpm_outbound_enter_critical(cpu, cluster)) { - spin_unlock(&boot_lock); + spin_unlock(&boot_lock); + if (last_man) { /* Since it's Cortex A15, disable L2 prefetching. */ asm volatile( "mcr p15, 1, %0, c15, c0, 3 \n\t" @@ -170,34 +183,30 @@ static void hip04_mcpm_power_down(void) "dsb " : : "r" (0x400) ); v7_exit_coherency_flush(all); - hip04_set_snoop_filter(cluster, 0); - __mcpm_outbound_leave_critical(cluster, CLUSTER_DOWN); } else { - spin_unlock(&boot_lock); v7_exit_coherency_flush(louis); } - __mcpm_cpu_down(cpu, cluster); - - if (!skip_wfi) + for (;;) wfi(); } -static int hip04_mcpm_wait_for_powerdown(unsigned int cpu, unsigned int cluster) +static int hip04_cpu_kill(unsigned int l_cpu) { + unsigned int mpidr, cpu, cluster; unsigned int data, tries, count; - int ret = -ETIMEDOUT; + mpidr = cpu_logical_map(l_cpu); + cpu = MPIDR_AFFINITY_LEVEL(mpidr, 0); + cluster = MPIDR_AFFINITY_LEVEL(mpidr, 1); BUG_ON(cluster >= HIP04_MAX_CLUSTERS || cpu >= HIP04_MAX_CPUS_PER_CLUSTER); count = TIMEOUT_MSEC / POLL_MSEC; spin_lock_irq(&boot_lock); for (tries = 0; tries < count; tries++) { - if (hip04_cpu_table[cluster][cpu]) { - ret = -EBUSY; + if (hip04_cpu_table[cluster][cpu]) goto err; - } cpu_relax(); data = readl_relaxed(sysctrl + SC_CPU_RESET_STATUS(cluster)); if (data & CORE_WFI_STATUS(cpu)) @@ -220,64 +229,22 @@ static int hip04_mcpm_wait_for_powerdown(unsigned int cpu, unsigned int cluster) } if (tries >= count) goto err; + if (hip04_cluster_is_down(cluster)) + hip04_set_snoop_filter(cluster, 0); spin_unlock_irq(&boot_lock); - return 0; + return 1; err: spin_unlock_irq(&boot_lock); - return ret; -} - -static void hip04_mcpm_powered_up(void) -{ - unsigned int mpidr, cpu, cluster; - - mpidr = read_cpuid_mpidr(); - cpu = MPIDR_AFFINITY_LEVEL(mpidr, 0); - cluster = MPIDR_AFFINITY_LEVEL(mpidr, 1); - - spin_lock(&boot_lock); - if (!hip04_cpu_table[cluster][cpu]) - hip04_cpu_table[cluster][cpu] = 1; - spin_unlock(&boot_lock); -} - -static void __naked hip04_mcpm_power_up_setup(unsigned int affinity_level) -{ - asm volatile (" \n" -" cmp r0, #0 \n" -" bxeq lr \n" - /* calculate fabric phys address */ -" adr r2, 2f \n" -" ldmia r2, {r1, r3} \n" -" sub r0, r2, r1 \n" -" ldr r2, [r0, r3] \n" - /* get cluster id from MPIDR */ -" mrc p15, 0, r0, c0, c0, 5 \n" -" ubfx r1, r0, #8, #8 \n" - /* 1 << cluster id */ -" mov r0, #1 \n" -" mov r3, r0, lsl r1 \n" -" ldr r0, [r2, #"__stringify(FAB_SF_MODE)"] \n" -" tst r0, r3 \n" -" bxne lr \n" -" orr r1, r0, r3 \n" -" str r1, [r2, #"__stringify(FAB_SF_MODE)"] \n" -"1: ldr r0, [r2, #"__stringify(FAB_SF_MODE)"] \n" -" tst r0, r3 \n" -" beq 1b \n" -" bx lr \n" - -" .align 2 \n" -"2: .word . \n" -" .word fabric_phys_addr \n" - ); + return 0; } - -static const struct mcpm_platform_ops hip04_mcpm_ops = { - .power_up = hip04_mcpm_power_up, - .power_down = hip04_mcpm_power_down, - .wait_for_powerdown = hip04_mcpm_wait_for_powerdown, - .powered_up = hip04_mcpm_powered_up, +#endif + +static struct smp_operations __initdata hip04_smp_ops = { + .smp_boot_secondary = hip04_boot_secondary, +#ifdef CONFIG_HOTPLUG_CPU + .cpu_die = hip04_cpu_die, + .cpu_kill = hip04_cpu_kill, +#endif }; static bool __init hip04_cpu_table_init(void) @@ -298,7 +265,7 @@ static bool __init hip04_cpu_table_init(void) return true; } -static int __init hip04_mcpm_init(void) +static int __init hip04_smp_init(void) { struct device_node *np, *np_sctl, *np_fab; struct resource fab_res; @@ -353,10 +320,6 @@ static int __init hip04_mcpm_init(void) ret = -EINVAL; goto err_table; } - ret = mcpm_platform_register(&hip04_mcpm_ops); - if (ret) { - goto err_table; - } /* * Fill the instruction address that is used after secondary core @@ -364,13 +327,11 @@ static int __init hip04_mcpm_init(void) */ writel_relaxed(hip04_boot_method[0], relocation); writel_relaxed(0xa5a5a5a5, relocation + 4); /* magic number */ - writel_relaxed(virt_to_phys(mcpm_entry_point), relocation + 8); + writel_relaxed(virt_to_phys(secondary_startup), relocation + 8); writel_relaxed(0, relocation + 12); iounmap(relocation); - mcpm_sync_init(hip04_mcpm_power_up_setup); - mcpm_smp_set_ops(); - pr_info("HiP04 MCPM initialized\n"); + smp_set_ops(&hip04_smp_ops); return ret; err_table: iounmap(fabric); @@ -383,4 +344,4 @@ err_reloc: err: return ret; } -early_initcall(hip04_mcpm_init); +early_initcall(hip04_smp_init); diff --git a/arch/arm/mach-hisi/platsmp.c b/arch/arm/mach-hisi/platsmp.c index 8880c8e8b..51744127d 100644 --- a/arch/arm/mach-hisi/platsmp.c +++ b/arch/arm/mach-hisi/platsmp.c @@ -118,7 +118,7 @@ static int hix5hd2_boot_secondary(unsigned int cpu, struct task_struct *idle) { phys_addr_t jumpaddr; - jumpaddr = virt_to_phys(hisi_secondary_startup); + jumpaddr = virt_to_phys(secondary_startup); hix5hd2_set_scu_boot_addr(HIX5HD2_BOOT_ADDRESS, jumpaddr); hix5hd2_set_cpu(cpu, true); arch_send_wakeup_ipi_mask(cpumask_of(cpu)); @@ -156,7 +156,7 @@ static int hip01_boot_secondary(unsigned int cpu, struct task_struct *idle) struct device_node *node; - jumpaddr = virt_to_phys(hisi_secondary_startup); + jumpaddr = virt_to_phys(secondary_startup); hip01_set_boot_addr(HIP01_BOOT_ADDRESS, jumpaddr); node = of_find_compatible_node(NULL, NULL, "hisilicon,hip01-sysctrl"); diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig index 3a3d3e9d7..573536f1b 100644 --- a/arch/arm/mach-imx/Kconfig +++ b/arch/arm/mach-imx/Kconfig @@ -1,8 +1,8 @@ menuconfig ARCH_MXC - bool "Freescale i.MX family" if ARCH_MULTI_V4_V5 || ARCH_MULTI_V6_V7 + bool "Freescale i.MX family" if ARCH_MULTI_V4_V5 || ARCH_MULTI_V6_V7 || ARM_SINGLE_ARMV7M select ARCH_REQUIRE_GPIOLIB select ARM_CPU_SUSPEND if PM - select CLKSRC_MMIO + select CLKSRC_IMX_GPT select GENERIC_IRQ_CHIP select PINCTRL select PM_OPP if PM @@ -444,40 +444,6 @@ config MACH_MX35_3DS Include support for MX35PDK platform. This includes specific configurations for the board and its peripherals. -config MACH_EUKREA_CPUIMX35SD - bool "Support Eukrea CPUIMX35 Platform" - select IMX_HAVE_PLATFORM_FLEXCAN - select IMX_HAVE_PLATFORM_FSL_USB2_UDC - select IMX_HAVE_PLATFORM_IMX2_WDT - select IMX_HAVE_PLATFORM_IMX_I2C - select IMX_HAVE_PLATFORM_IMX_UART - select IMX_HAVE_PLATFORM_MXC_EHCI - select IMX_HAVE_PLATFORM_MXC_NAND - select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX - select USB_ULPI_VIEWPORT if USB_ULPI - select SOC_IMX35 - help - Include support for Eukrea CPUIMX35 platform. This includes - specific configurations for the board and its peripherals. - -choice - prompt "Baseboard" - depends on MACH_EUKREA_CPUIMX35SD - default MACH_EUKREA_MBIMXSD35_BASEBOARD - -config MACH_EUKREA_MBIMXSD35_BASEBOARD - bool "Eukrea MBIMXSD development board" - select IMX_HAVE_PLATFORM_GPIO_KEYS - select IMX_HAVE_PLATFORM_IMX_SSI - select IMX_HAVE_PLATFORM_IPU_CORE - select IMX_HAVE_PLATFORM_SPI_IMX - select LEDS_GPIO_REGISTER - help - This adds board specific devices that can be found on Eukrea's - MBIMXSD evaluation board. - -endchoice - config MACH_VPR200 bool "Support VPR200 platform" select IMX_HAVE_PLATFORM_FSL_USB2_UDC @@ -496,10 +462,10 @@ config MACH_VPR200 endif -if ARCH_MULTI_V5 - comment "Device tree only" +if ARCH_MULTI_V5 + config SOC_IMX25 bool "i.MX25 support" select ARCH_MXC_IOMUX_V3 @@ -512,7 +478,7 @@ endif if ARCH_MULTI_V7 -comment "Device tree only" +comment "Cortex-A platforms" config SOC_IMX5 bool @@ -582,10 +548,33 @@ config SOC_IMX6SX help This enables support for Freescale i.MX6 SoloX processor. +config SOC_IMX7D + bool "i.MX7 Dual support" + select PINCTRL_IMX7D + select ARM_GIC + select HAVE_IMX_ANATOP + select HAVE_IMX_MMDC + help + This enables support for Freescale i.MX7 Dual processor. + +config SOC_LS1021A + bool "Freescale LS1021A support" + select ARM_GIC + select HAVE_ARM_ARCH_TIMER + select PCI_DOMAINS if PCI + select ZONE_DMA if ARM_LPAE + help + This enables support for Freescale LS1021A processor. + +endif + +comment "Cortex-A/Cortex-M asymmetric multiprocessing platforms" + +if ARCH_MULTI_V7 || ARM_SINGLE_ARMV7M + config SOC_VF610 bool "Vybrid Family VF610 support" - select IRQ_DOMAIN_HIERARCHY - select ARM_GIC + select ARM_GIC if ARCH_MULTI_V7 select PINCTRL_VF610 select PL310_ERRATA_769419 if CACHE_L2X0 select SMP_ON_UP if SMP @@ -599,7 +588,7 @@ choice default VF_USE_ARM_GLOBAL_TIMER config VF_USE_ARM_GLOBAL_TIMER - bool "Use ARM Global Timer" + bool "Use ARM Global Timer" if ARCH_MULTI_V7 select ARM_GLOBAL_TIMER select CLKSRC_ARM_GLOBAL_TIMER_SCHED_CLOCK help @@ -613,16 +602,6 @@ choice endchoice -config SOC_LS1021A - bool "Freescale LS1021A support" - select ARM_GIC - select HAVE_ARM_ARCH_TIMER - select PCI_DOMAINS if PCI - select ZONE_DMA if ARM_LPAE - - help - This enables support for Freescale LS1021A processor. - endif source "arch/arm/mach-imx/devices/Kconfig" diff --git a/arch/arm/mach-imx/Makefile b/arch/arm/mach-imx/Makefile index 3244cf1d2..37c502ac9 100644 --- a/arch/arm/mach-imx/Makefile +++ b/arch/arm/mach-imx/Makefile @@ -1,23 +1,18 @@ -obj-y := time.o cpu.o system.o irq-common.o +obj-y := cpu.o system.o irq-common.o -obj-$(CONFIG_SOC_IMX1) += clk-imx1.o mm-imx1.o -obj-$(CONFIG_SOC_IMX21) += clk-imx21.o mm-imx21.o +obj-$(CONFIG_SOC_IMX1) += mm-imx1.o +obj-$(CONFIG_SOC_IMX21) += mm-imx21.o -obj-$(CONFIG_SOC_IMX25) += clk-imx25.o cpu-imx25.o mach-imx25.o +obj-$(CONFIG_SOC_IMX25) += cpu-imx25.o mach-imx25.o obj-$(CONFIG_SOC_IMX27) += cpu-imx27.o pm-imx27.o -obj-$(CONFIG_SOC_IMX27) += clk-imx27.o mm-imx27.o ehci-imx27.o +obj-$(CONFIG_SOC_IMX27) += mm-imx27.o ehci-imx27.o -obj-$(CONFIG_SOC_IMX31) += mm-imx3.o cpu-imx31.o clk-imx31.o iomux-imx31.o ehci-imx31.o pm-imx3.o -obj-$(CONFIG_SOC_IMX35) += mm-imx3.o cpu-imx35.o clk-imx35.o ehci-imx35.o pm-imx3.o +obj-$(CONFIG_SOC_IMX31) += mm-imx3.o cpu-imx31.o iomux-imx31.o ehci-imx31.o pm-imx3.o +obj-$(CONFIG_SOC_IMX35) += mm-imx3.o cpu-imx35.o ehci-imx35.o pm-imx3.o imx5-pm-$(CONFIG_PM) += pm-imx5.o -obj-$(CONFIG_SOC_IMX5) += cpu-imx5.o clk-imx51-imx53.o clk-cpu.o $(imx5-pm-y) - -obj-$(CONFIG_COMMON_CLK) += clk-pllv1.o clk-pllv2.o clk-pllv3.o clk-gate2.o \ - clk-pfd.o clk-busy.o clk.o \ - clk-fixup-div.o clk-fixup-mux.o \ - clk-gate-exclusive.o +obj-$(CONFIG_SOC_IMX5) += cpu-imx5.o $(imx5-pm-y) obj-$(CONFIG_IMX_HAVE_IOMUX_V1) += iomux-v1.o obj-$(CONFIG_ARCH_MXC_IOMUX_V3) += iomux-v3.o @@ -73,8 +68,6 @@ obj-$(CONFIG_MACH_IMX31_DT) += imx31-dt.o # i.MX35 based machines obj-$(CONFIG_MACH_PCM043) += mach-pcm043.o obj-$(CONFIG_MACH_MX35_3DS) += mach-mx35_3ds.o -obj-$(CONFIG_MACH_EUKREA_CPUIMX35SD) += mach-cpuimx35.o -obj-$(CONFIG_MACH_EUKREA_MBIMXSD35_BASEBOARD) += eukrea_mbimxsd35-baseboard.o obj-$(CONFIG_MACH_VPR200) += mach-vpr200.o obj-$(CONFIG_MACH_IMX35_DT) += imx35-dt.o @@ -87,13 +80,15 @@ AFLAGS_headsmp.o :=-Wa,-march=armv7-a obj-$(CONFIG_SMP) += headsmp.o platsmp.o obj-$(CONFIG_HOTPLUG_CPU) += hotplug.o endif -obj-$(CONFIG_SOC_IMX6Q) += clk-imx6q.o mach-imx6q.o -obj-$(CONFIG_SOC_IMX6SL) += clk-imx6sl.o mach-imx6sl.o -obj-$(CONFIG_SOC_IMX6SX) += clk-imx6sx.o mach-imx6sx.o +obj-$(CONFIG_SOC_IMX6Q) += mach-imx6q.o +obj-$(CONFIG_SOC_IMX6SL) += mach-imx6sl.o +obj-$(CONFIG_SOC_IMX6SX) += mach-imx6sx.o +obj-$(CONFIG_SOC_IMX7D) += mach-imx7d.o ifeq ($(CONFIG_SUSPEND),y) AFLAGS_suspend-imx6.o :=-Wa,-march=armv7-a obj-$(CONFIG_SOC_IMX6) += suspend-imx6.o +obj-$(CONFIG_SOC_IMX53) += suspend-imx53.o endif obj-$(CONFIG_SOC_IMX6) += pm-imx6.o @@ -101,7 +96,7 @@ obj-$(CONFIG_SOC_IMX50) += mach-imx50.o obj-$(CONFIG_SOC_IMX51) += mach-imx51.o obj-$(CONFIG_SOC_IMX53) += mach-imx53.o -obj-$(CONFIG_SOC_VF610) += clk-vf610.o mach-vf610.o +obj-$(CONFIG_SOC_VF610) += mach-vf610.o obj-$(CONFIG_SOC_LS1021A) += mach-ls1021a.o diff --git a/arch/arm/mach-imx/Makefile.boot b/arch/arm/mach-imx/Makefile.boot new file mode 100644 index 000000000..e69de29bb --- /dev/null +++ b/arch/arm/mach-imx/Makefile.boot diff --git a/arch/arm/mach-imx/anatop.c b/arch/arm/mach-imx/anatop.c index 7f262fe4b..231bb250c 100644 --- a/arch/arm/mach-imx/anatop.c +++ b/arch/arm/mach-imx/anatop.c @@ -1,5 +1,5 @@ /* - * Copyright (C) 2013 Freescale Semiconductor, Inc. + * Copyright (C) 2013-2015 Freescale Semiconductor, Inc. * * The code contained herein is licensed under the GNU General Public * License. You may obtain a copy of the GNU General Public License @@ -28,6 +28,7 @@ #define ANADIG_USB2_CHRG_DETECT 0x210 #define ANADIG_DIGPROG 0x260 #define ANADIG_DIGPROG_IMX6SL 0x280 +#define ANADIG_DIGPROG_IMX7D 0x800 #define BM_ANADIG_REG_2P5_ENABLE_WEAK_LINREG 0x40000 #define BM_ANADIG_REG_2P5_ENABLE_PULLDOWN 0x8 @@ -121,6 +122,8 @@ void __init imx_init_revision_from_anatop(void) WARN_ON(!anatop_base); if (of_device_is_compatible(np, "fsl,imx6sl-anatop")) offset = ANADIG_DIGPROG_IMX6SL; + if (of_device_is_compatible(np, "fsl,imx7d-anatop")) + offset = ANADIG_DIGPROG_IMX7D; digprog = readl_relaxed(anatop_base + offset); iounmap(anatop_base); diff --git a/arch/arm/mach-imx/clk-busy.c b/arch/arm/mach-imx/clk-busy.c deleted file mode 100644 index 4bb1bc419..000000000 --- a/arch/arm/mach-imx/clk-busy.c +++ /dev/null @@ -1,189 +0,0 @@ -/* - * Copyright 2012 Freescale Semiconductor, Inc. - * Copyright 2012 Linaro Ltd. - * - * The code contained herein is licensed under the GNU General Public - * License. You may obtain a copy of the GNU General Public License - * Version 2 or later at the following locations: - * - * http://www.opensource.org/licenses/gpl-license.html - * http://www.gnu.org/copyleft/gpl.html - */ - -#include <linux/clk.h> -#include <linux/clk-provider.h> -#include <linux/io.h> -#include <linux/slab.h> -#include <linux/jiffies.h> -#include <linux/err.h> -#include "clk.h" - -static int clk_busy_wait(void __iomem *reg, u8 shift) -{ - unsigned long timeout = jiffies + msecs_to_jiffies(10); - - while (readl_relaxed(reg) & (1 << shift)) - if (time_after(jiffies, timeout)) - return -ETIMEDOUT; - - return 0; -} - -struct clk_busy_divider { - struct clk_divider div; - const struct clk_ops *div_ops; - void __iomem *reg; - u8 shift; -}; - -static inline struct clk_busy_divider *to_clk_busy_divider(struct clk_hw *hw) -{ - struct clk_divider *div = container_of(hw, struct clk_divider, hw); - - return container_of(div, struct clk_busy_divider, div); -} - -static unsigned long clk_busy_divider_recalc_rate(struct clk_hw *hw, - unsigned long parent_rate) -{ - struct clk_busy_divider *busy = to_clk_busy_divider(hw); - - return busy->div_ops->recalc_rate(&busy->div.hw, parent_rate); -} - -static long clk_busy_divider_round_rate(struct clk_hw *hw, unsigned long rate, - unsigned long *prate) -{ - struct clk_busy_divider *busy = to_clk_busy_divider(hw); - - return busy->div_ops->round_rate(&busy->div.hw, rate, prate); -} - -static int clk_busy_divider_set_rate(struct clk_hw *hw, unsigned long rate, - unsigned long parent_rate) -{ - struct clk_busy_divider *busy = to_clk_busy_divider(hw); - int ret; - - ret = busy->div_ops->set_rate(&busy->div.hw, rate, parent_rate); - if (!ret) - ret = clk_busy_wait(busy->reg, busy->shift); - - return ret; -} - -static struct clk_ops clk_busy_divider_ops = { - .recalc_rate = clk_busy_divider_recalc_rate, - .round_rate = clk_busy_divider_round_rate, - .set_rate = clk_busy_divider_set_rate, -}; - -struct clk *imx_clk_busy_divider(const char *name, const char *parent_name, - void __iomem *reg, u8 shift, u8 width, - void __iomem *busy_reg, u8 busy_shift) -{ - struct clk_busy_divider *busy; - struct clk *clk; - struct clk_init_data init; - - busy = kzalloc(sizeof(*busy), GFP_KERNEL); - if (!busy) - return ERR_PTR(-ENOMEM); - - busy->reg = busy_reg; - busy->shift = busy_shift; - - busy->div.reg = reg; - busy->div.shift = shift; - busy->div.width = width; - busy->div.lock = &imx_ccm_lock; - busy->div_ops = &clk_divider_ops; - - init.name = name; - init.ops = &clk_busy_divider_ops; - init.flags = CLK_SET_RATE_PARENT; - init.parent_names = &parent_name; - init.num_parents = 1; - - busy->div.hw.init = &init; - - clk = clk_register(NULL, &busy->div.hw); - if (IS_ERR(clk)) - kfree(busy); - - return clk; -} - -struct clk_busy_mux { - struct clk_mux mux; - const struct clk_ops *mux_ops; - void __iomem *reg; - u8 shift; -}; - -static inline struct clk_busy_mux *to_clk_busy_mux(struct clk_hw *hw) -{ - struct clk_mux *mux = container_of(hw, struct clk_mux, hw); - - return container_of(mux, struct clk_busy_mux, mux); -} - -static u8 clk_busy_mux_get_parent(struct clk_hw *hw) -{ - struct clk_busy_mux *busy = to_clk_busy_mux(hw); - - return busy->mux_ops->get_parent(&busy->mux.hw); -} - -static int clk_busy_mux_set_parent(struct clk_hw *hw, u8 index) -{ - struct clk_busy_mux *busy = to_clk_busy_mux(hw); - int ret; - - ret = busy->mux_ops->set_parent(&busy->mux.hw, index); - if (!ret) - ret = clk_busy_wait(busy->reg, busy->shift); - - return ret; -} - -static struct clk_ops clk_busy_mux_ops = { - .get_parent = clk_busy_mux_get_parent, - .set_parent = clk_busy_mux_set_parent, -}; - -struct clk *imx_clk_busy_mux(const char *name, void __iomem *reg, u8 shift, - u8 width, void __iomem *busy_reg, u8 busy_shift, - const char **parent_names, int num_parents) -{ - struct clk_busy_mux *busy; - struct clk *clk; - struct clk_init_data init; - - busy = kzalloc(sizeof(*busy), GFP_KERNEL); - if (!busy) - return ERR_PTR(-ENOMEM); - - busy->reg = busy_reg; - busy->shift = busy_shift; - - busy->mux.reg = reg; - busy->mux.shift = shift; - busy->mux.mask = BIT(width) - 1; - busy->mux.lock = &imx_ccm_lock; - busy->mux_ops = &clk_mux_ops; - - init.name = name; - init.ops = &clk_busy_mux_ops; - init.flags = 0; - init.parent_names = parent_names; - init.num_parents = num_parents; - - busy->mux.hw.init = &init; - - clk = clk_register(NULL, &busy->mux.hw); - if (IS_ERR(clk)) - kfree(busy); - - return clk; -} diff --git a/arch/arm/mach-imx/clk-cpu.c b/arch/arm/mach-imx/clk-cpu.c deleted file mode 100644 index aa1c345e2..000000000 --- a/arch/arm/mach-imx/clk-cpu.c +++ /dev/null @@ -1,107 +0,0 @@ -/* - * Copyright (c) 2014 Lucas Stach <l.stach@pengutronix.de>, Pengutronix - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * http://www.opensource.org/licenses/gpl-license.html - * http://www.gnu.org/copyleft/gpl.html - */ - -#include <linux/clk.h> -#include <linux/clk-provider.h> -#include <linux/slab.h> - -struct clk_cpu { - struct clk_hw hw; - struct clk *div; - struct clk *mux; - struct clk *pll; - struct clk *step; -}; - -static inline struct clk_cpu *to_clk_cpu(struct clk_hw *hw) -{ - return container_of(hw, struct clk_cpu, hw); -} - -static unsigned long clk_cpu_recalc_rate(struct clk_hw *hw, - unsigned long parent_rate) -{ - struct clk_cpu *cpu = to_clk_cpu(hw); - - return clk_get_rate(cpu->div); -} - -static long clk_cpu_round_rate(struct clk_hw *hw, unsigned long rate, - unsigned long *prate) -{ - struct clk_cpu *cpu = to_clk_cpu(hw); - - return clk_round_rate(cpu->pll, rate); -} - -static int clk_cpu_set_rate(struct clk_hw *hw, unsigned long rate, - unsigned long parent_rate) -{ - struct clk_cpu *cpu = to_clk_cpu(hw); - int ret; - - /* switch to PLL bypass clock */ - ret = clk_set_parent(cpu->mux, cpu->step); - if (ret) - return ret; - - /* reprogram PLL */ - ret = clk_set_rate(cpu->pll, rate); - if (ret) { - clk_set_parent(cpu->mux, cpu->pll); - return ret; - } - /* switch back to PLL clock */ - clk_set_parent(cpu->mux, cpu->pll); - - /* Ensure the divider is what we expect */ - clk_set_rate(cpu->div, rate); - - return 0; -} - -static const struct clk_ops clk_cpu_ops = { - .recalc_rate = clk_cpu_recalc_rate, - .round_rate = clk_cpu_round_rate, - .set_rate = clk_cpu_set_rate, -}; - -struct clk *imx_clk_cpu(const char *name, const char *parent_name, - struct clk *div, struct clk *mux, struct clk *pll, - struct clk *step) -{ - struct clk_cpu *cpu; - struct clk *clk; - struct clk_init_data init; - - cpu = kzalloc(sizeof(*cpu), GFP_KERNEL); - if (!cpu) - return ERR_PTR(-ENOMEM); - - cpu->div = div; - cpu->mux = mux; - cpu->pll = pll; - cpu->step = step; - - init.name = name; - init.ops = &clk_cpu_ops; - init.flags = 0; - init.parent_names = &parent_name; - init.num_parents = 1; - - cpu->hw.init = &init; - - clk = clk_register(NULL, &cpu->hw); - if (IS_ERR(clk)) - kfree(cpu); - - return clk; -} diff --git a/arch/arm/mach-imx/clk-fixup-div.c b/arch/arm/mach-imx/clk-fixup-div.c deleted file mode 100644 index 21db020b1..000000000 --- a/arch/arm/mach-imx/clk-fixup-div.c +++ /dev/null @@ -1,129 +0,0 @@ -/* - * Copyright (C) 2013 Freescale Semiconductor, Inc. - * - * The code contained herein is licensed under the GNU General Public - * License. You may obtain a copy of the GNU General Public License - * Version 2 or later at the following locations: - * - * http://www.opensource.org/licenses/gpl-license.html - * http://www.gnu.org/copyleft/gpl.html - */ - -#include <linux/clk-provider.h> -#include <linux/err.h> -#include <linux/io.h> -#include <linux/slab.h> -#include "clk.h" - -#define to_clk_div(_hw) container_of(_hw, struct clk_divider, hw) -#define div_mask(d) ((1 << (d->width)) - 1) - -/** - * struct clk_fixup_div - imx integer fixup divider clock - * @divider: the parent class - * @ops: pointer to clk_ops of parent class - * @fixup: a hook to fixup the write value - * - * The imx fixup divider clock is a subclass of basic clk_divider - * with an addtional fixup hook. - */ -struct clk_fixup_div { - struct clk_divider divider; - const struct clk_ops *ops; - void (*fixup)(u32 *val); -}; - -static inline struct clk_fixup_div *to_clk_fixup_div(struct clk_hw *hw) -{ - struct clk_divider *divider = to_clk_div(hw); - - return container_of(divider, struct clk_fixup_div, divider); -} - -static unsigned long clk_fixup_div_recalc_rate(struct clk_hw *hw, - unsigned long parent_rate) -{ - struct clk_fixup_div *fixup_div = to_clk_fixup_div(hw); - - return fixup_div->ops->recalc_rate(&fixup_div->divider.hw, parent_rate); -} - -static long clk_fixup_div_round_rate(struct clk_hw *hw, unsigned long rate, - unsigned long *prate) -{ - struct clk_fixup_div *fixup_div = to_clk_fixup_div(hw); - - return fixup_div->ops->round_rate(&fixup_div->divider.hw, rate, prate); -} - -static int clk_fixup_div_set_rate(struct clk_hw *hw, unsigned long rate, - unsigned long parent_rate) -{ - struct clk_fixup_div *fixup_div = to_clk_fixup_div(hw); - struct clk_divider *div = to_clk_div(hw); - unsigned int divider, value; - unsigned long flags = 0; - u32 val; - - divider = parent_rate / rate; - - /* Zero based divider */ - value = divider - 1; - - if (value > div_mask(div)) - value = div_mask(div); - - spin_lock_irqsave(div->lock, flags); - - val = readl(div->reg); - val &= ~(div_mask(div) << div->shift); - val |= value << div->shift; - fixup_div->fixup(&val); - writel(val, div->reg); - - spin_unlock_irqrestore(div->lock, flags); - - return 0; -} - -static const struct clk_ops clk_fixup_div_ops = { - .recalc_rate = clk_fixup_div_recalc_rate, - .round_rate = clk_fixup_div_round_rate, - .set_rate = clk_fixup_div_set_rate, -}; - -struct clk *imx_clk_fixup_divider(const char *name, const char *parent, - void __iomem *reg, u8 shift, u8 width, - void (*fixup)(u32 *val)) -{ - struct clk_fixup_div *fixup_div; - struct clk *clk; - struct clk_init_data init; - - if (!fixup) - return ERR_PTR(-EINVAL); - - fixup_div = kzalloc(sizeof(*fixup_div), GFP_KERNEL); - if (!fixup_div) - return ERR_PTR(-ENOMEM); - - init.name = name; - init.ops = &clk_fixup_div_ops; - init.flags = CLK_SET_RATE_PARENT; - init.parent_names = parent ? &parent : NULL; - init.num_parents = parent ? 1 : 0; - - fixup_div->divider.reg = reg; - fixup_div->divider.shift = shift; - fixup_div->divider.width = width; - fixup_div->divider.lock = &imx_ccm_lock; - fixup_div->divider.hw.init = &init; - fixup_div->ops = &clk_divider_ops; - fixup_div->fixup = fixup; - - clk = clk_register(NULL, &fixup_div->divider.hw); - if (IS_ERR(clk)) - kfree(fixup_div); - - return clk; -} diff --git a/arch/arm/mach-imx/clk-fixup-mux.c b/arch/arm/mach-imx/clk-fixup-mux.c deleted file mode 100644 index 0d40b35c5..000000000 --- a/arch/arm/mach-imx/clk-fixup-mux.c +++ /dev/null @@ -1,108 +0,0 @@ -/* - * Copyright (C) 2013 Freescale Semiconductor, Inc. - * - * The code contained herein is licensed under the GNU General Public - * License. You may obtain a copy of the GNU General Public License - * Version 2 or later at the following locations: - * - * http://www.opensource.org/licenses/gpl-license.html - * http://www.gnu.org/copyleft/gpl.html - */ - -#include <linux/clk-provider.h> -#include <linux/err.h> -#include <linux/io.h> -#include <linux/slab.h> -#include "clk.h" - -#define to_clk_mux(_hw) container_of(_hw, struct clk_mux, hw) - -/** - * struct clk_fixup_mux - imx integer fixup multiplexer clock - * @mux: the parent class - * @ops: pointer to clk_ops of parent class - * @fixup: a hook to fixup the write value - * - * The imx fixup multiplexer clock is a subclass of basic clk_mux - * with an addtional fixup hook. - */ -struct clk_fixup_mux { - struct clk_mux mux; - const struct clk_ops *ops; - void (*fixup)(u32 *val); -}; - -static inline struct clk_fixup_mux *to_clk_fixup_mux(struct clk_hw *hw) -{ - struct clk_mux *mux = to_clk_mux(hw); - - return container_of(mux, struct clk_fixup_mux, mux); -} - -static u8 clk_fixup_mux_get_parent(struct clk_hw *hw) -{ - struct clk_fixup_mux *fixup_mux = to_clk_fixup_mux(hw); - - return fixup_mux->ops->get_parent(&fixup_mux->mux.hw); -} - -static int clk_fixup_mux_set_parent(struct clk_hw *hw, u8 index) -{ - struct clk_fixup_mux *fixup_mux = to_clk_fixup_mux(hw); - struct clk_mux *mux = to_clk_mux(hw); - unsigned long flags = 0; - u32 val; - - spin_lock_irqsave(mux->lock, flags); - - val = readl(mux->reg); - val &= ~(mux->mask << mux->shift); - val |= index << mux->shift; - fixup_mux->fixup(&val); - writel(val, mux->reg); - - spin_unlock_irqrestore(mux->lock, flags); - - return 0; -} - -static const struct clk_ops clk_fixup_mux_ops = { - .get_parent = clk_fixup_mux_get_parent, - .set_parent = clk_fixup_mux_set_parent, -}; - -struct clk *imx_clk_fixup_mux(const char *name, void __iomem *reg, - u8 shift, u8 width, const char **parents, - int num_parents, void (*fixup)(u32 *val)) -{ - struct clk_fixup_mux *fixup_mux; - struct clk *clk; - struct clk_init_data init; - - if (!fixup) - return ERR_PTR(-EINVAL); - - fixup_mux = kzalloc(sizeof(*fixup_mux), GFP_KERNEL); - if (!fixup_mux) - return ERR_PTR(-ENOMEM); - - init.name = name; - init.ops = &clk_fixup_mux_ops; - init.parent_names = parents; - init.num_parents = num_parents; - init.flags = 0; - - fixup_mux->mux.reg = reg; - fixup_mux->mux.shift = shift; - fixup_mux->mux.mask = BIT(width) - 1; - fixup_mux->mux.lock = &imx_ccm_lock; - fixup_mux->mux.hw.init = &init; - fixup_mux->ops = &clk_mux_ops; - fixup_mux->fixup = fixup; - - clk = clk_register(NULL, &fixup_mux->mux.hw); - if (IS_ERR(clk)) - kfree(fixup_mux); - - return clk; -} diff --git a/arch/arm/mach-imx/clk-gate-exclusive.c b/arch/arm/mach-imx/clk-gate-exclusive.c deleted file mode 100644 index c12f5f2e0..000000000 --- a/arch/arm/mach-imx/clk-gate-exclusive.c +++ /dev/null @@ -1,94 +0,0 @@ -/* - * Copyright 2014 Freescale Semiconductor, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#include <linux/clk-provider.h> -#include <linux/err.h> -#include <linux/io.h> -#include <linux/slab.h> -#include "clk.h" - -/** - * struct clk_gate_exclusive - i.MX specific gate clock which is mutually - * exclusive with other gate clocks - * - * @gate: the parent class - * @exclusive_mask: mask of gate bits which are mutually exclusive to this - * gate clock - * - * The imx exclusive gate clock is a subclass of basic clk_gate - * with an addtional mask to indicate which other gate bits in the same - * register is mutually exclusive to this gate clock. - */ -struct clk_gate_exclusive { - struct clk_gate gate; - u32 exclusive_mask; -}; - -static int clk_gate_exclusive_enable(struct clk_hw *hw) -{ - struct clk_gate *gate = container_of(hw, struct clk_gate, hw); - struct clk_gate_exclusive *exgate = container_of(gate, - struct clk_gate_exclusive, gate); - u32 val = readl(gate->reg); - - if (val & exgate->exclusive_mask) - return -EBUSY; - - return clk_gate_ops.enable(hw); -} - -static void clk_gate_exclusive_disable(struct clk_hw *hw) -{ - clk_gate_ops.disable(hw); -} - -static int clk_gate_exclusive_is_enabled(struct clk_hw *hw) -{ - return clk_gate_ops.is_enabled(hw); -} - -static const struct clk_ops clk_gate_exclusive_ops = { - .enable = clk_gate_exclusive_enable, - .disable = clk_gate_exclusive_disable, - .is_enabled = clk_gate_exclusive_is_enabled, -}; - -struct clk *imx_clk_gate_exclusive(const char *name, const char *parent, - void __iomem *reg, u8 shift, u32 exclusive_mask) -{ - struct clk_gate_exclusive *exgate; - struct clk_gate *gate; - struct clk *clk; - struct clk_init_data init; - - if (exclusive_mask == 0) - return ERR_PTR(-EINVAL); - - exgate = kzalloc(sizeof(*exgate), GFP_KERNEL); - if (!exgate) - return ERR_PTR(-ENOMEM); - gate = &exgate->gate; - - init.name = name; - init.ops = &clk_gate_exclusive_ops; - init.flags = CLK_SET_RATE_PARENT; - init.parent_names = parent ? &parent : NULL; - init.num_parents = parent ? 1 : 0; - - gate->reg = reg; - gate->bit_idx = shift; - gate->lock = &imx_ccm_lock; - gate->hw.init = &init; - exgate->exclusive_mask = exclusive_mask; - - clk = clk_register(NULL, &gate->hw); - if (IS_ERR(clk)) - kfree(exgate); - - return clk; -} diff --git a/arch/arm/mach-imx/clk-gate2.c b/arch/arm/mach-imx/clk-gate2.c deleted file mode 100644 index 8935bff99..000000000 --- a/arch/arm/mach-imx/clk-gate2.c +++ /dev/null @@ -1,160 +0,0 @@ -/* - * Copyright (C) 2010-2011 Canonical Ltd <jeremy.kerr@canonical.com> - * Copyright (C) 2011-2012 Mike Turquette, Linaro Ltd <mturquette@linaro.org> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * Gated clock implementation - */ - -#include <linux/clk-provider.h> -#include <linux/module.h> -#include <linux/slab.h> -#include <linux/io.h> -#include <linux/err.h> -#include <linux/string.h> -#include "clk.h" - -/** - * DOC: basic gatable clock which can gate and ungate it's ouput - * - * Traits of this clock: - * prepare - clk_(un)prepare only ensures parent is (un)prepared - * enable - clk_enable and clk_disable are functional & control gating - * rate - inherits rate from parent. No clk_set_rate support - * parent - fixed parent. No clk_set_parent support - */ - -struct clk_gate2 { - struct clk_hw hw; - void __iomem *reg; - u8 bit_idx; - u8 flags; - spinlock_t *lock; - unsigned int *share_count; -}; - -#define to_clk_gate2(_hw) container_of(_hw, struct clk_gate2, hw) - -static int clk_gate2_enable(struct clk_hw *hw) -{ - struct clk_gate2 *gate = to_clk_gate2(hw); - u32 reg; - unsigned long flags = 0; - - spin_lock_irqsave(gate->lock, flags); - - if (gate->share_count && (*gate->share_count)++ > 0) - goto out; - - reg = readl(gate->reg); - reg |= 3 << gate->bit_idx; - writel(reg, gate->reg); - -out: - spin_unlock_irqrestore(gate->lock, flags); - - return 0; -} - -static void clk_gate2_disable(struct clk_hw *hw) -{ - struct clk_gate2 *gate = to_clk_gate2(hw); - u32 reg; - unsigned long flags = 0; - - spin_lock_irqsave(gate->lock, flags); - - if (gate->share_count) { - if (WARN_ON(*gate->share_count == 0)) - goto out; - else if (--(*gate->share_count) > 0) - goto out; - } - - reg = readl(gate->reg); - reg &= ~(3 << gate->bit_idx); - writel(reg, gate->reg); - -out: - spin_unlock_irqrestore(gate->lock, flags); -} - -static int clk_gate2_reg_is_enabled(void __iomem *reg, u8 bit_idx) -{ - u32 val = readl(reg); - - if (((val >> bit_idx) & 1) == 1) - return 1; - - return 0; -} - -static int clk_gate2_is_enabled(struct clk_hw *hw) -{ - struct clk_gate2 *gate = to_clk_gate2(hw); - - return clk_gate2_reg_is_enabled(gate->reg, gate->bit_idx); -} - -static void clk_gate2_disable_unused(struct clk_hw *hw) -{ - struct clk_gate2 *gate = to_clk_gate2(hw); - unsigned long flags = 0; - u32 reg; - - spin_lock_irqsave(gate->lock, flags); - - if (!gate->share_count || *gate->share_count == 0) { - reg = readl(gate->reg); - reg &= ~(3 << gate->bit_idx); - writel(reg, gate->reg); - } - - spin_unlock_irqrestore(gate->lock, flags); -} - -static struct clk_ops clk_gate2_ops = { - .enable = clk_gate2_enable, - .disable = clk_gate2_disable, - .disable_unused = clk_gate2_disable_unused, - .is_enabled = clk_gate2_is_enabled, -}; - -struct clk *clk_register_gate2(struct device *dev, const char *name, - const char *parent_name, unsigned long flags, - void __iomem *reg, u8 bit_idx, - u8 clk_gate2_flags, spinlock_t *lock, - unsigned int *share_count) -{ - struct clk_gate2 *gate; - struct clk *clk; - struct clk_init_data init; - - gate = kzalloc(sizeof(struct clk_gate2), GFP_KERNEL); - if (!gate) - return ERR_PTR(-ENOMEM); - - /* struct clk_gate2 assignments */ - gate->reg = reg; - gate->bit_idx = bit_idx; - gate->flags = clk_gate2_flags; - gate->lock = lock; - gate->share_count = share_count; - - init.name = name; - init.ops = &clk_gate2_ops; - init.flags = flags; - init.parent_names = parent_name ? &parent_name : NULL; - init.num_parents = parent_name ? 1 : 0; - - gate->hw.init = &init; - - clk = clk_register(dev, &gate->hw); - if (IS_ERR(clk)) - kfree(gate); - - return clk; -} diff --git a/arch/arm/mach-imx/clk-imx1.c b/arch/arm/mach-imx/clk-imx1.c deleted file mode 100644 index 37c307a8d..000000000 --- a/arch/arm/mach-imx/clk-imx1.c +++ /dev/null @@ -1,117 +0,0 @@ -/* - * Copyright (C) 2008 Sascha Hauer <s.hauer@pengutronix.de>, Pengutronix - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301, USA. - */ - -#include <linux/clk.h> -#include <linux/clkdev.h> -#include <linux/clk-provider.h> -#include <linux/err.h> -#include <linux/init.h> -#include <linux/of.h> -#include <linux/of_address.h> -#include <dt-bindings/clock/imx1-clock.h> - -#include "clk.h" -#include "common.h" -#include "hardware.h" - -static const char *prem_sel_clks[] = { "clk32_premult", "clk16m", }; -static const char *clko_sel_clks[] = { "per1", "hclk", "clk48m", "clk16m", - "prem", "fclk", }; - -static struct clk *clk[IMX1_CLK_MAX]; -static struct clk_onecell_data clk_data; - -static void __iomem *ccm __initdata; -#define CCM_CSCR (ccm + 0x0000) -#define CCM_MPCTL0 (ccm + 0x0004) -#define CCM_SPCTL0 (ccm + 0x000c) -#define CCM_PCDR (ccm + 0x0020) -#define SCM_GCCR (ccm + 0x0810) - -static void __init _mx1_clocks_init(unsigned long fref) -{ - clk[IMX1_CLK_DUMMY] = imx_clk_fixed("dummy", 0); - clk[IMX1_CLK_CLK32] = imx_obtain_fixed_clock("clk32", fref); - clk[IMX1_CLK_CLK16M_EXT] = imx_clk_fixed("clk16m_ext", 16000000); - clk[IMX1_CLK_CLK16M] = imx_clk_gate("clk16m", "clk16m_ext", CCM_CSCR, 17); - clk[IMX1_CLK_CLK32_PREMULT] = imx_clk_fixed_factor("clk32_premult", "clk32", 512, 1); - clk[IMX1_CLK_PREM] = imx_clk_mux("prem", CCM_CSCR, 16, 1, prem_sel_clks, ARRAY_SIZE(prem_sel_clks)); - clk[IMX1_CLK_MPLL] = imx_clk_pllv1("mpll", "clk32_premult", CCM_MPCTL0); - clk[IMX1_CLK_MPLL_GATE] = imx_clk_gate("mpll_gate", "mpll", CCM_CSCR, 0); - clk[IMX1_CLK_SPLL] = imx_clk_pllv1("spll", "prem", CCM_SPCTL0); - clk[IMX1_CLK_SPLL_GATE] = imx_clk_gate("spll_gate", "spll", CCM_CSCR, 1); - clk[IMX1_CLK_MCU] = imx_clk_divider("mcu", "clk32_premult", CCM_CSCR, 15, 1); - clk[IMX1_CLK_FCLK] = imx_clk_divider("fclk", "mpll_gate", CCM_CSCR, 15, 1); - clk[IMX1_CLK_HCLK] = imx_clk_divider("hclk", "spll_gate", CCM_CSCR, 10, 4); - clk[IMX1_CLK_CLK48M] = imx_clk_divider("clk48m", "spll_gate", CCM_CSCR, 26, 3); - clk[IMX1_CLK_PER1] = imx_clk_divider("per1", "spll_gate", CCM_PCDR, 0, 4); - clk[IMX1_CLK_PER2] = imx_clk_divider("per2", "spll_gate", CCM_PCDR, 4, 4); - clk[IMX1_CLK_PER3] = imx_clk_divider("per3", "spll_gate", CCM_PCDR, 16, 7); - clk[IMX1_CLK_CLKO] = imx_clk_mux("clko", CCM_CSCR, 29, 3, clko_sel_clks, ARRAY_SIZE(clko_sel_clks)); - clk[IMX1_CLK_UART3_GATE] = imx_clk_gate("uart3_gate", "hclk", SCM_GCCR, 6); - clk[IMX1_CLK_SSI2_GATE] = imx_clk_gate("ssi2_gate", "hclk", SCM_GCCR, 5); - clk[IMX1_CLK_BROM_GATE] = imx_clk_gate("brom_gate", "hclk", SCM_GCCR, 4); - clk[IMX1_CLK_DMA_GATE] = imx_clk_gate("dma_gate", "hclk", SCM_GCCR, 3); - clk[IMX1_CLK_CSI_GATE] = imx_clk_gate("csi_gate", "hclk", SCM_GCCR, 2); - clk[IMX1_CLK_MMA_GATE] = imx_clk_gate("mma_gate", "hclk", SCM_GCCR, 1); - clk[IMX1_CLK_USBD_GATE] = imx_clk_gate("usbd_gate", "clk48m", SCM_GCCR, 0); - - imx_check_clocks(clk, ARRAY_SIZE(clk)); -} - -int __init mx1_clocks_init(unsigned long fref) -{ - ccm = MX1_IO_ADDRESS(MX1_CCM_BASE_ADDR); - - _mx1_clocks_init(fref); - - clk_register_clkdev(clk[IMX1_CLK_PER1], "per", "imx-gpt.0"); - clk_register_clkdev(clk[IMX1_CLK_HCLK], "ipg", "imx-gpt.0"); - clk_register_clkdev(clk[IMX1_CLK_DMA_GATE], "ahb", "imx1-dma"); - clk_register_clkdev(clk[IMX1_CLK_HCLK], "ipg", "imx1-dma"); - clk_register_clkdev(clk[IMX1_CLK_PER1], "per", "imx1-uart.0"); - clk_register_clkdev(clk[IMX1_CLK_HCLK], "ipg", "imx1-uart.0"); - clk_register_clkdev(clk[IMX1_CLK_PER1], "per", "imx1-uart.1"); - clk_register_clkdev(clk[IMX1_CLK_HCLK], "ipg", "imx1-uart.1"); - clk_register_clkdev(clk[IMX1_CLK_PER1], "per", "imx1-uart.2"); - clk_register_clkdev(clk[IMX1_CLK_UART3_GATE], "ipg", "imx1-uart.2"); - clk_register_clkdev(clk[IMX1_CLK_HCLK], NULL, "imx1-i2c.0"); - clk_register_clkdev(clk[IMX1_CLK_PER2], "per", "imx1-cspi.0"); - clk_register_clkdev(clk[IMX1_CLK_DUMMY], "ipg", "imx1-cspi.0"); - clk_register_clkdev(clk[IMX1_CLK_PER2], "per", "imx1-cspi.1"); - clk_register_clkdev(clk[IMX1_CLK_DUMMY], "ipg", "imx1-cspi.1"); - clk_register_clkdev(clk[IMX1_CLK_PER2], "per", "imx1-fb.0"); - clk_register_clkdev(clk[IMX1_CLK_DUMMY], "ipg", "imx1-fb.0"); - clk_register_clkdev(clk[IMX1_CLK_DUMMY], "ahb", "imx1-fb.0"); - - mxc_timer_init(MX1_IO_ADDRESS(MX1_TIM1_BASE_ADDR), MX1_TIM1_INT); - - return 0; -} - -static void __init mx1_clocks_init_dt(struct device_node *np) -{ - ccm = of_iomap(np, 0); - BUG_ON(!ccm); - - _mx1_clocks_init(32768); - - clk_data.clks = clk; - clk_data.clk_num = ARRAY_SIZE(clk); - of_clk_add_provider(np, of_clk_src_onecell_get, &clk_data); -} -CLK_OF_DECLARE(imx1_ccm, "fsl,imx1-ccm", mx1_clocks_init_dt); diff --git a/arch/arm/mach-imx/clk-imx21.c b/arch/arm/mach-imx/clk-imx21.c deleted file mode 100644 index 4b4c75339..000000000 --- a/arch/arm/mach-imx/clk-imx21.c +++ /dev/null @@ -1,171 +0,0 @@ -/* - * Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved. - * Copyright 2008 Juergen Beisert, kernel@pengutronix.de - * Copyright 2008 Martin Fuzzey, mfuzzey@gmail.com - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version 2 - * of the License, or (at your option) any later version. - */ - -#include <linux/clk.h> -#include <linux/clk-provider.h> -#include <linux/clkdev.h> -#include <linux/of.h> -#include <linux/of_address.h> -#include <dt-bindings/clock/imx21-clock.h> - -#include "clk.h" -#include "common.h" -#include "hardware.h" - -static void __iomem *ccm __initdata; - -/* Register offsets */ -#define CCM_CSCR (ccm + 0x00) -#define CCM_MPCTL0 (ccm + 0x04) -#define CCM_SPCTL0 (ccm + 0x0c) -#define CCM_PCDR0 (ccm + 0x18) -#define CCM_PCDR1 (ccm + 0x1c) -#define CCM_PCCR0 (ccm + 0x20) -#define CCM_PCCR1 (ccm + 0x24) - -static const char *mpll_osc_sel_clks[] = { "ckih_gate", "ckih_div1p5", }; -static const char *mpll_sel_clks[] = { "fpm_gate", "mpll_osc_sel", }; -static const char *spll_sel_clks[] = { "fpm_gate", "mpll_osc_sel", }; -static const char *ssi_sel_clks[] = { "spll_gate", "mpll_gate", }; - -static struct clk *clk[IMX21_CLK_MAX]; -static struct clk_onecell_data clk_data; - -static void __init _mx21_clocks_init(unsigned long lref, unsigned long href) -{ - BUG_ON(!ccm); - - clk[IMX21_CLK_DUMMY] = imx_clk_fixed("dummy", 0); - clk[IMX21_CLK_CKIL] = imx_obtain_fixed_clock("ckil", lref); - clk[IMX21_CLK_CKIH] = imx_obtain_fixed_clock("ckih", href); - clk[IMX21_CLK_FPM] = imx_clk_fixed_factor("fpm", "ckil", 512, 1); - clk[IMX21_CLK_CKIH_DIV1P5] = imx_clk_fixed_factor("ckih_div1p5", "ckih_gate", 2, 3); - - clk[IMX21_CLK_MPLL_GATE] = imx_clk_gate("mpll_gate", "mpll", CCM_CSCR, 0); - clk[IMX21_CLK_SPLL_GATE] = imx_clk_gate("spll_gate", "spll", CCM_CSCR, 1); - clk[IMX21_CLK_FPM_GATE] = imx_clk_gate("fpm_gate", "fpm", CCM_CSCR, 2); - clk[IMX21_CLK_CKIH_GATE] = imx_clk_gate_dis("ckih_gate", "ckih", CCM_CSCR, 3); - clk[IMX21_CLK_MPLL_OSC_SEL] = imx_clk_mux("mpll_osc_sel", CCM_CSCR, 4, 1, mpll_osc_sel_clks, ARRAY_SIZE(mpll_osc_sel_clks)); - clk[IMX21_CLK_IPG] = imx_clk_divider("ipg", "hclk", CCM_CSCR, 9, 1); - clk[IMX21_CLK_HCLK] = imx_clk_divider("hclk", "fclk", CCM_CSCR, 10, 4); - clk[IMX21_CLK_MPLL_SEL] = imx_clk_mux("mpll_sel", CCM_CSCR, 16, 1, mpll_sel_clks, ARRAY_SIZE(mpll_sel_clks)); - clk[IMX21_CLK_SPLL_SEL] = imx_clk_mux("spll_sel", CCM_CSCR, 17, 1, spll_sel_clks, ARRAY_SIZE(spll_sel_clks)); - clk[IMX21_CLK_SSI1_SEL] = imx_clk_mux("ssi1_sel", CCM_CSCR, 19, 1, ssi_sel_clks, ARRAY_SIZE(ssi_sel_clks)); - clk[IMX21_CLK_SSI2_SEL] = imx_clk_mux("ssi2_sel", CCM_CSCR, 20, 1, ssi_sel_clks, ARRAY_SIZE(ssi_sel_clks)); - clk[IMX21_CLK_USB_DIV] = imx_clk_divider("usb_div", "spll_gate", CCM_CSCR, 26, 3); - clk[IMX21_CLK_FCLK] = imx_clk_divider("fclk", "mpll_gate", CCM_CSCR, 29, 3); - - clk[IMX21_CLK_MPLL] = imx_clk_pllv1("mpll", "mpll_sel", CCM_MPCTL0); - - clk[IMX21_CLK_SPLL] = imx_clk_pllv1("spll", "spll_sel", CCM_SPCTL0); - - clk[IMX21_CLK_NFC_DIV] = imx_clk_divider("nfc_div", "fclk", CCM_PCDR0, 12, 4); - clk[IMX21_CLK_SSI1_DIV] = imx_clk_divider("ssi1_div", "ssi1_sel", CCM_PCDR0, 16, 6); - clk[IMX21_CLK_SSI2_DIV] = imx_clk_divider("ssi2_div", "ssi2_sel", CCM_PCDR0, 26, 6); - - clk[IMX21_CLK_PER1] = imx_clk_divider("per1", "mpll_gate", CCM_PCDR1, 0, 6); - clk[IMX21_CLK_PER2] = imx_clk_divider("per2", "mpll_gate", CCM_PCDR1, 8, 6); - clk[IMX21_CLK_PER3] = imx_clk_divider("per3", "mpll_gate", CCM_PCDR1, 16, 6); - clk[IMX21_CLK_PER4] = imx_clk_divider("per4", "mpll_gate", CCM_PCDR1, 24, 6); - - clk[IMX21_CLK_UART1_IPG_GATE] = imx_clk_gate("uart1_ipg_gate", "ipg", CCM_PCCR0, 0); - clk[IMX21_CLK_UART2_IPG_GATE] = imx_clk_gate("uart2_ipg_gate", "ipg", CCM_PCCR0, 1); - clk[IMX21_CLK_UART3_IPG_GATE] = imx_clk_gate("uart3_ipg_gate", "ipg", CCM_PCCR0, 2); - clk[IMX21_CLK_UART4_IPG_GATE] = imx_clk_gate("uart4_ipg_gate", "ipg", CCM_PCCR0, 3); - clk[IMX21_CLK_CSPI1_IPG_GATE] = imx_clk_gate("cspi1_ipg_gate", "ipg", CCM_PCCR0, 4); - clk[IMX21_CLK_CSPI2_IPG_GATE] = imx_clk_gate("cspi2_ipg_gate", "ipg", CCM_PCCR0, 5); - clk[IMX21_CLK_SSI1_GATE] = imx_clk_gate("ssi1_gate", "ipg", CCM_PCCR0, 6); - clk[IMX21_CLK_SSI2_GATE] = imx_clk_gate("ssi2_gate", "ipg", CCM_PCCR0, 7); - clk[IMX21_CLK_SDHC1_IPG_GATE] = imx_clk_gate("sdhc1_ipg_gate", "ipg", CCM_PCCR0, 9); - clk[IMX21_CLK_SDHC2_IPG_GATE] = imx_clk_gate("sdhc2_ipg_gate", "ipg", CCM_PCCR0, 10); - clk[IMX21_CLK_GPIO_GATE] = imx_clk_gate("gpio_gate", "ipg", CCM_PCCR0, 11); - clk[IMX21_CLK_I2C_GATE] = imx_clk_gate("i2c_gate", "ipg", CCM_PCCR0, 12); - clk[IMX21_CLK_DMA_GATE] = imx_clk_gate("dma_gate", "ipg", CCM_PCCR0, 13); - clk[IMX21_CLK_USB_GATE] = imx_clk_gate("usb_gate", "usb_div", CCM_PCCR0, 14); - clk[IMX21_CLK_EMMA_GATE] = imx_clk_gate("emma_gate", "ipg", CCM_PCCR0, 15); - clk[IMX21_CLK_SSI2_BAUD_GATE] = imx_clk_gate("ssi2_baud_gate", "ipg", CCM_PCCR0, 16); - clk[IMX21_CLK_SSI1_BAUD_GATE] = imx_clk_gate("ssi1_baud_gate", "ipg", CCM_PCCR0, 17); - clk[IMX21_CLK_LCDC_IPG_GATE] = imx_clk_gate("lcdc_ipg_gate", "ipg", CCM_PCCR0, 18); - clk[IMX21_CLK_NFC_GATE] = imx_clk_gate("nfc_gate", "nfc_div", CCM_PCCR0, 19); - clk[IMX21_CLK_SLCDC_HCLK_GATE] = imx_clk_gate("slcdc_hclk_gate", "hclk", CCM_PCCR0, 21); - clk[IMX21_CLK_PER4_GATE] = imx_clk_gate("per4_gate", "per4", CCM_PCCR0, 22); - clk[IMX21_CLK_BMI_GATE] = imx_clk_gate("bmi_gate", "hclk", CCM_PCCR0, 23); - clk[IMX21_CLK_USB_HCLK_GATE] = imx_clk_gate("usb_hclk_gate", "hclk", CCM_PCCR0, 24); - clk[IMX21_CLK_SLCDC_GATE] = imx_clk_gate("slcdc_gate", "hclk", CCM_PCCR0, 25); - clk[IMX21_CLK_LCDC_HCLK_GATE] = imx_clk_gate("lcdc_hclk_gate", "hclk", CCM_PCCR0, 26); - clk[IMX21_CLK_EMMA_HCLK_GATE] = imx_clk_gate("emma_hclk_gate", "hclk", CCM_PCCR0, 27); - clk[IMX21_CLK_BROM_GATE] = imx_clk_gate("brom_gate", "hclk", CCM_PCCR0, 28); - clk[IMX21_CLK_DMA_HCLK_GATE] = imx_clk_gate("dma_hclk_gate", "hclk", CCM_PCCR0, 30); - clk[IMX21_CLK_CSI_HCLK_GATE] = imx_clk_gate("csi_hclk_gate", "hclk", CCM_PCCR0, 31); - - clk[IMX21_CLK_CSPI3_IPG_GATE] = imx_clk_gate("cspi3_ipg_gate", "ipg", CCM_PCCR1, 23); - clk[IMX21_CLK_WDOG_GATE] = imx_clk_gate("wdog_gate", "ipg", CCM_PCCR1, 24); - clk[IMX21_CLK_GPT1_IPG_GATE] = imx_clk_gate("gpt1_ipg_gate", "ipg", CCM_PCCR1, 25); - clk[IMX21_CLK_GPT2_IPG_GATE] = imx_clk_gate("gpt2_ipg_gate", "ipg", CCM_PCCR1, 26); - clk[IMX21_CLK_GPT3_IPG_GATE] = imx_clk_gate("gpt3_ipg_gate", "ipg", CCM_PCCR1, 27); - clk[IMX21_CLK_PWM_IPG_GATE] = imx_clk_gate("pwm_ipg_gate", "ipg", CCM_PCCR1, 28); - clk[IMX21_CLK_RTC_GATE] = imx_clk_gate("rtc_gate", "ipg", CCM_PCCR1, 29); - clk[IMX21_CLK_KPP_GATE] = imx_clk_gate("kpp_gate", "ipg", CCM_PCCR1, 30); - clk[IMX21_CLK_OWIRE_GATE] = imx_clk_gate("owire_gate", "ipg", CCM_PCCR1, 31); - - imx_check_clocks(clk, ARRAY_SIZE(clk)); -} - -int __init mx21_clocks_init(unsigned long lref, unsigned long href) -{ - ccm = ioremap(MX21_CCM_BASE_ADDR, SZ_2K); - - _mx21_clocks_init(lref, href); - - clk_register_clkdev(clk[IMX21_CLK_PER1], "per", "imx21-uart.0"); - clk_register_clkdev(clk[IMX21_CLK_UART1_IPG_GATE], "ipg", "imx21-uart.0"); - clk_register_clkdev(clk[IMX21_CLK_PER1], "per", "imx21-uart.1"); - clk_register_clkdev(clk[IMX21_CLK_UART2_IPG_GATE], "ipg", "imx21-uart.1"); - clk_register_clkdev(clk[IMX21_CLK_PER1], "per", "imx21-uart.2"); - clk_register_clkdev(clk[IMX21_CLK_UART3_IPG_GATE], "ipg", "imx21-uart.2"); - clk_register_clkdev(clk[IMX21_CLK_PER1], "per", "imx21-uart.3"); - clk_register_clkdev(clk[IMX21_CLK_UART4_IPG_GATE], "ipg", "imx21-uart.3"); - clk_register_clkdev(clk[IMX21_CLK_GPT1_IPG_GATE], "ipg", "imx-gpt.0"); - clk_register_clkdev(clk[IMX21_CLK_PER1], "per", "imx-gpt.0"); - clk_register_clkdev(clk[IMX21_CLK_PER2], "per", "imx21-cspi.0"); - clk_register_clkdev(clk[IMX21_CLK_CSPI1_IPG_GATE], "ipg", "imx21-cspi.0"); - clk_register_clkdev(clk[IMX21_CLK_PER2], "per", "imx21-cspi.1"); - clk_register_clkdev(clk[IMX21_CLK_CSPI2_IPG_GATE], "ipg", "imx21-cspi.1"); - clk_register_clkdev(clk[IMX21_CLK_PER2], "per", "imx21-cspi.2"); - clk_register_clkdev(clk[IMX21_CLK_CSPI3_IPG_GATE], "ipg", "imx21-cspi.2"); - clk_register_clkdev(clk[IMX21_CLK_PER3], "per", "imx21-fb.0"); - clk_register_clkdev(clk[IMX21_CLK_LCDC_IPG_GATE], "ipg", "imx21-fb.0"); - clk_register_clkdev(clk[IMX21_CLK_LCDC_HCLK_GATE], "ahb", "imx21-fb.0"); - clk_register_clkdev(clk[IMX21_CLK_USB_GATE], "per", "imx21-hcd.0"); - clk_register_clkdev(clk[IMX21_CLK_USB_HCLK_GATE], "ahb", "imx21-hcd.0"); - clk_register_clkdev(clk[IMX21_CLK_NFC_GATE], NULL, "imx21-nand.0"); - clk_register_clkdev(clk[IMX21_CLK_DMA_HCLK_GATE], "ahb", "imx21-dma"); - clk_register_clkdev(clk[IMX21_CLK_DMA_GATE], "ipg", "imx21-dma"); - clk_register_clkdev(clk[IMX21_CLK_WDOG_GATE], NULL, "imx2-wdt.0"); - clk_register_clkdev(clk[IMX21_CLK_I2C_GATE], NULL, "imx21-i2c.0"); - clk_register_clkdev(clk[IMX21_CLK_OWIRE_GATE], NULL, "mxc_w1.0"); - - mxc_timer_init(MX21_IO_ADDRESS(MX21_GPT1_BASE_ADDR), MX21_INT_GPT1); - - return 0; -} - -static void __init mx21_clocks_init_dt(struct device_node *np) -{ - ccm = of_iomap(np, 0); - - _mx21_clocks_init(32768, 26000000); - - clk_data.clks = clk; - clk_data.clk_num = ARRAY_SIZE(clk); - of_clk_add_provider(np, of_clk_src_onecell_get, &clk_data); -} -CLK_OF_DECLARE(imx27_ccm, "fsl,imx21-ccm", mx21_clocks_init_dt); diff --git a/arch/arm/mach-imx/clk-imx25.c b/arch/arm/mach-imx/clk-imx25.c deleted file mode 100644 index 9c2633a9d..000000000 --- a/arch/arm/mach-imx/clk-imx25.c +++ /dev/null @@ -1,264 +0,0 @@ -/* - * Copyright (C) 2009 by Sascha Hauer, Pengutronix - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version 2 - * of the License, or (at your option) any later version. - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, - * MA 02110-1301, USA. - */ - -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/list.h> -#include <linux/clk.h> -#include <linux/io.h> -#include <linux/clkdev.h> -#include <linux/err.h> -#include <linux/of.h> -#include <linux/of_address.h> -#include <linux/of_irq.h> - -#include "clk.h" -#include "common.h" -#include "hardware.h" - -#define CCM_MPCTL 0x00 -#define CCM_UPCTL 0x04 -#define CCM_CCTL 0x08 -#define CCM_CGCR0 0x0C -#define CCM_CGCR1 0x10 -#define CCM_CGCR2 0x14 -#define CCM_PCDR0 0x18 -#define CCM_PCDR1 0x1C -#define CCM_PCDR2 0x20 -#define CCM_PCDR3 0x24 -#define CCM_RCSR 0x28 -#define CCM_CRDR 0x2C -#define CCM_DCVR0 0x30 -#define CCM_DCVR1 0x34 -#define CCM_DCVR2 0x38 -#define CCM_DCVR3 0x3c -#define CCM_LTR0 0x40 -#define CCM_LTR1 0x44 -#define CCM_LTR2 0x48 -#define CCM_LTR3 0x4c -#define CCM_MCR 0x64 - -#define ccm(x) (ccm_base + (x)) - -static struct clk_onecell_data clk_data; - -static const char *cpu_sel_clks[] = { "mpll", "mpll_cpu_3_4", }; -static const char *per_sel_clks[] = { "ahb", "upll", }; -static const char *cko_sel_clks[] = { "dummy", "osc", "cpu", "ahb", - "ipg", "dummy", "dummy", "dummy", - "dummy", "dummy", "per0", "per2", - "per13", "per14", "usbotg_ahb", "dummy",}; - -enum mx25_clks { - dummy, osc, mpll, upll, mpll_cpu_3_4, cpu_sel, cpu, ahb, usb_div, ipg, - per0_sel, per1_sel, per2_sel, per3_sel, per4_sel, per5_sel, per6_sel, - per7_sel, per8_sel, per9_sel, per10_sel, per11_sel, per12_sel, - per13_sel, per14_sel, per15_sel, per0, per1, per2, per3, per4, per5, - per6, per7, per8, per9, per10, per11, per12, per13, per14, per15, - csi_ipg_per, epit_ipg_per, esai_ipg_per, esdhc1_ipg_per, esdhc2_ipg_per, - gpt_ipg_per, i2c_ipg_per, lcdc_ipg_per, nfc_ipg_per, owire_ipg_per, - pwm_ipg_per, sim1_ipg_per, sim2_ipg_per, ssi1_ipg_per, ssi2_ipg_per, - uart_ipg_per, ata_ahb, reserved1, csi_ahb, emi_ahb, esai_ahb, esdhc1_ahb, - esdhc2_ahb, fec_ahb, lcdc_ahb, rtic_ahb, sdma_ahb, slcdc_ahb, usbotg_ahb, - reserved2, reserved3, reserved4, reserved5, can1_ipg, can2_ipg, csi_ipg, - cspi1_ipg, cspi2_ipg, cspi3_ipg, dryice_ipg, ect_ipg, epit1_ipg, epit2_ipg, - reserved6, esdhc1_ipg, esdhc2_ipg, fec_ipg, reserved7, reserved8, reserved9, - gpt1_ipg, gpt2_ipg, gpt3_ipg, gpt4_ipg, reserved10, reserved11, reserved12, - iim_ipg, reserved13, reserved14, kpp_ipg, lcdc_ipg, reserved15, pwm1_ipg, - pwm2_ipg, pwm3_ipg, pwm4_ipg, rngb_ipg, reserved16, scc_ipg, sdma_ipg, - sim1_ipg, sim2_ipg, slcdc_ipg, spba_ipg, ssi1_ipg, ssi2_ipg, tsc_ipg, - uart1_ipg, uart2_ipg, uart3_ipg, uart4_ipg, uart5_ipg, reserved17, - wdt_ipg, cko_div, cko_sel, cko, clk_max -}; - -static struct clk *clk[clk_max]; - -static int __init __mx25_clocks_init(unsigned long osc_rate, - void __iomem *ccm_base) -{ - BUG_ON(!ccm_base); - - clk[dummy] = imx_clk_fixed("dummy", 0); - clk[osc] = imx_clk_fixed("osc", osc_rate); - clk[mpll] = imx_clk_pllv1("mpll", "osc", ccm(CCM_MPCTL)); - clk[upll] = imx_clk_pllv1("upll", "osc", ccm(CCM_UPCTL)); - clk[mpll_cpu_3_4] = imx_clk_fixed_factor("mpll_cpu_3_4", "mpll", 3, 4); - clk[cpu_sel] = imx_clk_mux("cpu_sel", ccm(CCM_CCTL), 14, 1, cpu_sel_clks, ARRAY_SIZE(cpu_sel_clks)); - clk[cpu] = imx_clk_divider("cpu", "cpu_sel", ccm(CCM_CCTL), 30, 2); - clk[ahb] = imx_clk_divider("ahb", "cpu", ccm(CCM_CCTL), 28, 2); - clk[usb_div] = imx_clk_divider("usb_div", "upll", ccm(CCM_CCTL), 16, 6); - clk[ipg] = imx_clk_fixed_factor("ipg", "ahb", 1, 2); - clk[per0_sel] = imx_clk_mux("per0_sel", ccm(CCM_MCR), 0, 1, per_sel_clks, ARRAY_SIZE(per_sel_clks)); - clk[per1_sel] = imx_clk_mux("per1_sel", ccm(CCM_MCR), 1, 1, per_sel_clks, ARRAY_SIZE(per_sel_clks)); - clk[per2_sel] = imx_clk_mux("per2_sel", ccm(CCM_MCR), 2, 1, per_sel_clks, ARRAY_SIZE(per_sel_clks)); - clk[per3_sel] = imx_clk_mux("per3_sel", ccm(CCM_MCR), 3, 1, per_sel_clks, ARRAY_SIZE(per_sel_clks)); - clk[per4_sel] = imx_clk_mux("per4_sel", ccm(CCM_MCR), 4, 1, per_sel_clks, ARRAY_SIZE(per_sel_clks)); - clk[per5_sel] = imx_clk_mux("per5_sel", ccm(CCM_MCR), 5, 1, per_sel_clks, ARRAY_SIZE(per_sel_clks)); - clk[per6_sel] = imx_clk_mux("per6_sel", ccm(CCM_MCR), 6, 1, per_sel_clks, ARRAY_SIZE(per_sel_clks)); - clk[per7_sel] = imx_clk_mux("per7_sel", ccm(CCM_MCR), 7, 1, per_sel_clks, ARRAY_SIZE(per_sel_clks)); - clk[per8_sel] = imx_clk_mux("per8_sel", ccm(CCM_MCR), 8, 1, per_sel_clks, ARRAY_SIZE(per_sel_clks)); - clk[per9_sel] = imx_clk_mux("per9_sel", ccm(CCM_MCR), 9, 1, per_sel_clks, ARRAY_SIZE(per_sel_clks)); - clk[per10_sel] = imx_clk_mux("per10_sel", ccm(CCM_MCR), 10, 1, per_sel_clks, ARRAY_SIZE(per_sel_clks)); - clk[per11_sel] = imx_clk_mux("per11_sel", ccm(CCM_MCR), 11, 1, per_sel_clks, ARRAY_SIZE(per_sel_clks)); - clk[per12_sel] = imx_clk_mux("per12_sel", ccm(CCM_MCR), 12, 1, per_sel_clks, ARRAY_SIZE(per_sel_clks)); - clk[per13_sel] = imx_clk_mux("per13_sel", ccm(CCM_MCR), 13, 1, per_sel_clks, ARRAY_SIZE(per_sel_clks)); - clk[per14_sel] = imx_clk_mux("per14_sel", ccm(CCM_MCR), 14, 1, per_sel_clks, ARRAY_SIZE(per_sel_clks)); - clk[per15_sel] = imx_clk_mux("per15_sel", ccm(CCM_MCR), 15, 1, per_sel_clks, ARRAY_SIZE(per_sel_clks)); - clk[cko_div] = imx_clk_divider("cko_div", "cko_sel", ccm(CCM_MCR), 24, 6); - clk[cko_sel] = imx_clk_mux("cko_sel", ccm(CCM_MCR), 20, 4, cko_sel_clks, ARRAY_SIZE(cko_sel_clks)); - clk[cko] = imx_clk_gate("cko", "cko_div", ccm(CCM_MCR), 30); - clk[per0] = imx_clk_divider("per0", "per0_sel", ccm(CCM_PCDR0), 0, 6); - clk[per1] = imx_clk_divider("per1", "per1_sel", ccm(CCM_PCDR0), 8, 6); - clk[per2] = imx_clk_divider("per2", "per2_sel", ccm(CCM_PCDR0), 16, 6); - clk[per3] = imx_clk_divider("per3", "per3_sel", ccm(CCM_PCDR0), 24, 6); - clk[per4] = imx_clk_divider("per4", "per4_sel", ccm(CCM_PCDR1), 0, 6); - clk[per5] = imx_clk_divider("per5", "per5_sel", ccm(CCM_PCDR1), 8, 6); - clk[per6] = imx_clk_divider("per6", "per6_sel", ccm(CCM_PCDR1), 16, 6); - clk[per7] = imx_clk_divider("per7", "per7_sel", ccm(CCM_PCDR1), 24, 6); - clk[per8] = imx_clk_divider("per8", "per8_sel", ccm(CCM_PCDR2), 0, 6); - clk[per9] = imx_clk_divider("per9", "per9_sel", ccm(CCM_PCDR2), 8, 6); - clk[per10] = imx_clk_divider("per10", "per10_sel", ccm(CCM_PCDR2), 16, 6); - clk[per11] = imx_clk_divider("per11", "per11_sel", ccm(CCM_PCDR2), 24, 6); - clk[per12] = imx_clk_divider("per12", "per12_sel", ccm(CCM_PCDR3), 0, 6); - clk[per13] = imx_clk_divider("per13", "per13_sel", ccm(CCM_PCDR3), 8, 6); - clk[per14] = imx_clk_divider("per14", "per14_sel", ccm(CCM_PCDR3), 16, 6); - clk[per15] = imx_clk_divider("per15", "per15_sel", ccm(CCM_PCDR3), 24, 6); - clk[csi_ipg_per] = imx_clk_gate("csi_ipg_per", "per0", ccm(CCM_CGCR0), 0); - clk[epit_ipg_per] = imx_clk_gate("epit_ipg_per", "per1", ccm(CCM_CGCR0), 1); - clk[esai_ipg_per] = imx_clk_gate("esai_ipg_per", "per2", ccm(CCM_CGCR0), 2); - clk[esdhc1_ipg_per] = imx_clk_gate("esdhc1_ipg_per", "per3", ccm(CCM_CGCR0), 3); - clk[esdhc2_ipg_per] = imx_clk_gate("esdhc2_ipg_per", "per4", ccm(CCM_CGCR0), 4); - clk[gpt_ipg_per] = imx_clk_gate("gpt_ipg_per", "per5", ccm(CCM_CGCR0), 5); - clk[i2c_ipg_per] = imx_clk_gate("i2c_ipg_per", "per6", ccm(CCM_CGCR0), 6); - clk[lcdc_ipg_per] = imx_clk_gate("lcdc_ipg_per", "per7", ccm(CCM_CGCR0), 7); - clk[nfc_ipg_per] = imx_clk_gate("nfc_ipg_per", "per8", ccm(CCM_CGCR0), 8); - clk[owire_ipg_per] = imx_clk_gate("owire_ipg_per", "per9", ccm(CCM_CGCR0), 9); - clk[pwm_ipg_per] = imx_clk_gate("pwm_ipg_per", "per10", ccm(CCM_CGCR0), 10); - clk[sim1_ipg_per] = imx_clk_gate("sim1_ipg_per", "per11", ccm(CCM_CGCR0), 11); - clk[sim2_ipg_per] = imx_clk_gate("sim2_ipg_per", "per12", ccm(CCM_CGCR0), 12); - clk[ssi1_ipg_per] = imx_clk_gate("ssi1_ipg_per", "per13", ccm(CCM_CGCR0), 13); - clk[ssi2_ipg_per] = imx_clk_gate("ssi2_ipg_per", "per14", ccm(CCM_CGCR0), 14); - clk[uart_ipg_per] = imx_clk_gate("uart_ipg_per", "per15", ccm(CCM_CGCR0), 15); - clk[ata_ahb] = imx_clk_gate("ata_ahb", "ahb", ccm(CCM_CGCR0), 16); - /* CCM_CGCR0(17): reserved */ - clk[csi_ahb] = imx_clk_gate("csi_ahb", "ahb", ccm(CCM_CGCR0), 18); - clk[emi_ahb] = imx_clk_gate("emi_ahb", "ahb", ccm(CCM_CGCR0), 19); - clk[esai_ahb] = imx_clk_gate("esai_ahb", "ahb", ccm(CCM_CGCR0), 20); - clk[esdhc1_ahb] = imx_clk_gate("esdhc1_ahb", "ahb", ccm(CCM_CGCR0), 21); - clk[esdhc2_ahb] = imx_clk_gate("esdhc2_ahb", "ahb", ccm(CCM_CGCR0), 22); - clk[fec_ahb] = imx_clk_gate("fec_ahb", "ahb", ccm(CCM_CGCR0), 23); - clk[lcdc_ahb] = imx_clk_gate("lcdc_ahb", "ahb", ccm(CCM_CGCR0), 24); - clk[rtic_ahb] = imx_clk_gate("rtic_ahb", "ahb", ccm(CCM_CGCR0), 25); - clk[sdma_ahb] = imx_clk_gate("sdma_ahb", "ahb", ccm(CCM_CGCR0), 26); - clk[slcdc_ahb] = imx_clk_gate("slcdc_ahb", "ahb", ccm(CCM_CGCR0), 27); - clk[usbotg_ahb] = imx_clk_gate("usbotg_ahb", "ahb", ccm(CCM_CGCR0), 28); - /* CCM_CGCR0(29-31): reserved */ - /* CCM_CGCR1(0): reserved in datasheet, used as audmux in FSL kernel */ - clk[can1_ipg] = imx_clk_gate("can1_ipg", "ipg", ccm(CCM_CGCR1), 2); - clk[can2_ipg] = imx_clk_gate("can2_ipg", "ipg", ccm(CCM_CGCR1), 3); - clk[csi_ipg] = imx_clk_gate("csi_ipg", "ipg", ccm(CCM_CGCR1), 4); - clk[cspi1_ipg] = imx_clk_gate("cspi1_ipg", "ipg", ccm(CCM_CGCR1), 5); - clk[cspi2_ipg] = imx_clk_gate("cspi2_ipg", "ipg", ccm(CCM_CGCR1), 6); - clk[cspi3_ipg] = imx_clk_gate("cspi3_ipg", "ipg", ccm(CCM_CGCR1), 7); - clk[dryice_ipg] = imx_clk_gate("dryice_ipg", "ipg", ccm(CCM_CGCR1), 8); - clk[ect_ipg] = imx_clk_gate("ect_ipg", "ipg", ccm(CCM_CGCR1), 9); - clk[epit1_ipg] = imx_clk_gate("epit1_ipg", "ipg", ccm(CCM_CGCR1), 10); - clk[epit2_ipg] = imx_clk_gate("epit2_ipg", "ipg", ccm(CCM_CGCR1), 11); - /* CCM_CGCR1(12): reserved in datasheet, used as esai in FSL kernel */ - clk[esdhc1_ipg] = imx_clk_gate("esdhc1_ipg", "ipg", ccm(CCM_CGCR1), 13); - clk[esdhc2_ipg] = imx_clk_gate("esdhc2_ipg", "ipg", ccm(CCM_CGCR1), 14); - clk[fec_ipg] = imx_clk_gate("fec_ipg", "ipg", ccm(CCM_CGCR1), 15); - /* CCM_CGCR1(16): reserved in datasheet, used as gpio1 in FSL kernel */ - /* CCM_CGCR1(17): reserved in datasheet, used as gpio2 in FSL kernel */ - /* CCM_CGCR1(18): reserved in datasheet, used as gpio3 in FSL kernel */ - clk[gpt1_ipg] = imx_clk_gate("gpt1_ipg", "ipg", ccm(CCM_CGCR1), 19); - clk[gpt2_ipg] = imx_clk_gate("gpt2_ipg", "ipg", ccm(CCM_CGCR1), 20); - clk[gpt3_ipg] = imx_clk_gate("gpt3_ipg", "ipg", ccm(CCM_CGCR1), 21); - clk[gpt4_ipg] = imx_clk_gate("gpt4_ipg", "ipg", ccm(CCM_CGCR1), 22); - /* CCM_CGCR1(23): reserved in datasheet, used as i2c1 in FSL kernel */ - /* CCM_CGCR1(24): reserved in datasheet, used as i2c2 in FSL kernel */ - /* CCM_CGCR1(25): reserved in datasheet, used as i2c3 in FSL kernel */ - clk[iim_ipg] = imx_clk_gate("iim_ipg", "ipg", ccm(CCM_CGCR1), 26); - /* CCM_CGCR1(27): reserved in datasheet, used as iomuxc in FSL kernel */ - /* CCM_CGCR1(28): reserved in datasheet, used as kpp in FSL kernel */ - clk[kpp_ipg] = imx_clk_gate("kpp_ipg", "ipg", ccm(CCM_CGCR1), 28); - clk[lcdc_ipg] = imx_clk_gate("lcdc_ipg", "ipg", ccm(CCM_CGCR1), 29); - /* CCM_CGCR1(30): reserved in datasheet, used as owire in FSL kernel */ - clk[pwm1_ipg] = imx_clk_gate("pwm1_ipg", "ipg", ccm(CCM_CGCR1), 31); - clk[pwm2_ipg] = imx_clk_gate("pwm2_ipg", "ipg", ccm(CCM_CGCR2), 0); - clk[pwm3_ipg] = imx_clk_gate("pwm3_ipg", "ipg", ccm(CCM_CGCR2), 1); - clk[pwm4_ipg] = imx_clk_gate("pwm4_ipg", "ipg", ccm(CCM_CGCR2), 2); - clk[rngb_ipg] = imx_clk_gate("rngb_ipg", "ipg", ccm(CCM_CGCR2), 3); - /* CCM_CGCR2(4): reserved in datasheet, used as rtic in FSL kernel */ - clk[scc_ipg] = imx_clk_gate("scc_ipg", "ipg", ccm(CCM_CGCR2), 5); - clk[sdma_ipg] = imx_clk_gate("sdma_ipg", "ipg", ccm(CCM_CGCR2), 6); - clk[sim1_ipg] = imx_clk_gate("sim1_ipg", "ipg", ccm(CCM_CGCR2), 7); - clk[sim2_ipg] = imx_clk_gate("sim2_ipg", "ipg", ccm(CCM_CGCR2), 8); - clk[slcdc_ipg] = imx_clk_gate("slcdc_ipg", "ipg", ccm(CCM_CGCR2), 9); - clk[spba_ipg] = imx_clk_gate("spba_ipg", "ipg", ccm(CCM_CGCR2), 10); - clk[ssi1_ipg] = imx_clk_gate("ssi1_ipg", "ipg", ccm(CCM_CGCR2), 11); - clk[ssi2_ipg] = imx_clk_gate("ssi2_ipg", "ipg", ccm(CCM_CGCR2), 12); - clk[tsc_ipg] = imx_clk_gate("tsc_ipg", "ipg", ccm(CCM_CGCR2), 13); - clk[uart1_ipg] = imx_clk_gate("uart1_ipg", "ipg", ccm(CCM_CGCR2), 14); - clk[uart2_ipg] = imx_clk_gate("uart2_ipg", "ipg", ccm(CCM_CGCR2), 15); - clk[uart3_ipg] = imx_clk_gate("uart3_ipg", "ipg", ccm(CCM_CGCR2), 16); - clk[uart4_ipg] = imx_clk_gate("uart4_ipg", "ipg", ccm(CCM_CGCR2), 17); - clk[uart5_ipg] = imx_clk_gate("uart5_ipg", "ipg", ccm(CCM_CGCR2), 18); - /* CCM_CGCR2(19): reserved in datasheet, but used as wdt in FSL kernel */ - clk[wdt_ipg] = imx_clk_gate("wdt_ipg", "ipg", ccm(CCM_CGCR2), 19); - - imx_check_clocks(clk, ARRAY_SIZE(clk)); - - clk_prepare_enable(clk[emi_ahb]); - - /* Clock source for gpt must be derived from AHB */ - clk_set_parent(clk[per5_sel], clk[ahb]); - - /* - * Let's initially set up CLKO parent as ipg, since this configuration - * is used on some imx25 board designs to clock the audio codec. - */ - clk_set_parent(clk[cko_sel], clk[ipg]); - - return 0; -} - -static void __init mx25_clocks_init_dt(struct device_node *np) -{ - struct device_node *refnp; - unsigned long osc_rate = 24000000; - void __iomem *ccm; - - /* retrieve the freqency of fixed clocks from device tree */ - for_each_compatible_node(refnp, NULL, "fixed-clock") { - u32 rate; - if (of_property_read_u32(refnp, "clock-frequency", &rate)) - continue; - - if (of_device_is_compatible(refnp, "fsl,imx-osc")) - osc_rate = rate; - } - - ccm = of_iomap(np, 0); - __mx25_clocks_init(osc_rate, ccm); - - clk_data.clks = clk; - clk_data.clk_num = ARRAY_SIZE(clk); - of_clk_add_provider(np, of_clk_src_onecell_get, &clk_data); -} -CLK_OF_DECLARE(imx25_ccm, "fsl,imx25-ccm", mx25_clocks_init_dt); diff --git a/arch/arm/mach-imx/clk-imx27.c b/arch/arm/mach-imx/clk-imx27.c deleted file mode 100644 index ab6349ec2..000000000 --- a/arch/arm/mach-imx/clk-imx27.c +++ /dev/null @@ -1,258 +0,0 @@ -#include <linux/clk.h> -#include <linux/clk-provider.h> -#include <linux/clkdev.h> -#include <linux/err.h> -#include <linux/of.h> -#include <linux/of_address.h> -#include <dt-bindings/clock/imx27-clock.h> - -#include "clk.h" -#include "common.h" -#include "hardware.h" - -static void __iomem *ccm __initdata; - -/* Register offsets */ -#define CCM_CSCR (ccm + 0x00) -#define CCM_MPCTL0 (ccm + 0x04) -#define CCM_MPCTL1 (ccm + 0x08) -#define CCM_SPCTL0 (ccm + 0x0c) -#define CCM_SPCTL1 (ccm + 0x10) -#define CCM_PCDR0 (ccm + 0x18) -#define CCM_PCDR1 (ccm + 0x1c) -#define CCM_PCCR0 (ccm + 0x20) -#define CCM_PCCR1 (ccm + 0x24) -#define CCM_CCSR (ccm + 0x28) - -static const char *vpu_sel_clks[] = { "spll", "mpll_main2", }; -static const char *cpu_sel_clks[] = { "mpll_main2", "mpll", }; -static const char *mpll_sel_clks[] = { "fpm", "mpll_osc_sel", }; -static const char *mpll_osc_sel_clks[] = { "ckih_gate", "ckih_div1p5", }; -static const char *clko_sel_clks[] = { - "ckil", "fpm", "ckih_gate", "ckih_gate", - "ckih_gate", "mpll", "spll", "cpu_div", - "ahb", "ipg", "per1_div", "per2_div", - "per3_div", "per4_div", "ssi1_div", "ssi2_div", - "nfc_div", "mshc_div", "vpu_div", "60m", - "32k", "usb_div", "dptc", -}; - -static const char *ssi_sel_clks[] = { "spll_gate", "mpll", }; - -static struct clk *clk[IMX27_CLK_MAX]; -static struct clk_onecell_data clk_data; - -static void __init _mx27_clocks_init(unsigned long fref) -{ - BUG_ON(!ccm); - - clk[IMX27_CLK_DUMMY] = imx_clk_fixed("dummy", 0); - clk[IMX27_CLK_CKIH] = imx_clk_fixed("ckih", fref); - clk[IMX27_CLK_CKIL] = imx_clk_fixed("ckil", 32768); - clk[IMX27_CLK_FPM] = imx_clk_fixed_factor("fpm", "ckil", 1024, 1); - clk[IMX27_CLK_CKIH_DIV1P5] = imx_clk_fixed_factor("ckih_div1p5", "ckih_gate", 2, 3); - clk[IMX27_CLK_CKIH_GATE] = imx_clk_gate_dis("ckih_gate", "ckih", CCM_CSCR, 3); - clk[IMX27_CLK_MPLL_OSC_SEL] = imx_clk_mux("mpll_osc_sel", CCM_CSCR, 4, 1, mpll_osc_sel_clks, ARRAY_SIZE(mpll_osc_sel_clks)); - clk[IMX27_CLK_MPLL_SEL] = imx_clk_mux("mpll_sel", CCM_CSCR, 16, 1, mpll_sel_clks, ARRAY_SIZE(mpll_sel_clks)); - clk[IMX27_CLK_MPLL] = imx_clk_pllv1("mpll", "mpll_sel", CCM_MPCTL0); - clk[IMX27_CLK_SPLL] = imx_clk_pllv1("spll", "ckih_gate", CCM_SPCTL0); - clk[IMX27_CLK_SPLL_GATE] = imx_clk_gate("spll_gate", "spll", CCM_CSCR, 1); - clk[IMX27_CLK_MPLL_MAIN2] = imx_clk_fixed_factor("mpll_main2", "mpll", 2, 3); - - if (mx27_revision() >= IMX_CHIP_REVISION_2_0) { - clk[IMX27_CLK_AHB] = imx_clk_divider("ahb", "mpll_main2", CCM_CSCR, 8, 2); - clk[IMX27_CLK_IPG] = imx_clk_fixed_factor("ipg", "ahb", 1, 2); - } else { - clk[IMX27_CLK_AHB] = imx_clk_divider("ahb", "mpll_main2", CCM_CSCR, 9, 4); - clk[IMX27_CLK_IPG] = imx_clk_divider("ipg", "ahb", CCM_CSCR, 8, 1); - } - - clk[IMX27_CLK_MSHC_DIV] = imx_clk_divider("mshc_div", "ahb", CCM_PCDR0, 0, 6); - clk[IMX27_CLK_NFC_DIV] = imx_clk_divider("nfc_div", "ahb", CCM_PCDR0, 6, 4); - clk[IMX27_CLK_PER1_DIV] = imx_clk_divider("per1_div", "mpll_main2", CCM_PCDR1, 0, 6); - clk[IMX27_CLK_PER2_DIV] = imx_clk_divider("per2_div", "mpll_main2", CCM_PCDR1, 8, 6); - clk[IMX27_CLK_PER3_DIV] = imx_clk_divider("per3_div", "mpll_main2", CCM_PCDR1, 16, 6); - clk[IMX27_CLK_PER4_DIV] = imx_clk_divider("per4_div", "mpll_main2", CCM_PCDR1, 24, 6); - clk[IMX27_CLK_VPU_SEL] = imx_clk_mux("vpu_sel", CCM_CSCR, 21, 1, vpu_sel_clks, ARRAY_SIZE(vpu_sel_clks)); - clk[IMX27_CLK_VPU_DIV] = imx_clk_divider("vpu_div", "vpu_sel", CCM_PCDR0, 10, 6); - clk[IMX27_CLK_USB_DIV] = imx_clk_divider("usb_div", "spll_gate", CCM_CSCR, 28, 3); - clk[IMX27_CLK_CPU_SEL] = imx_clk_mux("cpu_sel", CCM_CSCR, 15, 1, cpu_sel_clks, ARRAY_SIZE(cpu_sel_clks)); - clk[IMX27_CLK_CLKO_SEL] = imx_clk_mux("clko_sel", CCM_CCSR, 0, 5, clko_sel_clks, ARRAY_SIZE(clko_sel_clks)); - - if (mx27_revision() >= IMX_CHIP_REVISION_2_0) - clk[IMX27_CLK_CPU_DIV] = imx_clk_divider("cpu_div", "cpu_sel", CCM_CSCR, 12, 2); - else - clk[IMX27_CLK_CPU_DIV] = imx_clk_divider("cpu_div", "cpu_sel", CCM_CSCR, 13, 3); - - clk[IMX27_CLK_CLKO_DIV] = imx_clk_divider("clko_div", "clko_sel", CCM_PCDR0, 22, 3); - clk[IMX27_CLK_SSI1_SEL] = imx_clk_mux("ssi1_sel", CCM_CSCR, 22, 1, ssi_sel_clks, ARRAY_SIZE(ssi_sel_clks)); - clk[IMX27_CLK_SSI2_SEL] = imx_clk_mux("ssi2_sel", CCM_CSCR, 23, 1, ssi_sel_clks, ARRAY_SIZE(ssi_sel_clks)); - clk[IMX27_CLK_SSI1_DIV] = imx_clk_divider("ssi1_div", "ssi1_sel", CCM_PCDR0, 16, 6); - clk[IMX27_CLK_SSI2_DIV] = imx_clk_divider("ssi2_div", "ssi2_sel", CCM_PCDR0, 26, 6); - clk[IMX27_CLK_CLKO_EN] = imx_clk_gate("clko_en", "clko_div", CCM_PCCR0, 0); - clk[IMX27_CLK_SSI2_IPG_GATE] = imx_clk_gate("ssi2_ipg_gate", "ipg", CCM_PCCR0, 0); - clk[IMX27_CLK_SSI1_IPG_GATE] = imx_clk_gate("ssi1_ipg_gate", "ipg", CCM_PCCR0, 1); - clk[IMX27_CLK_SLCDC_IPG_GATE] = imx_clk_gate("slcdc_ipg_gate", "ipg", CCM_PCCR0, 2); - clk[IMX27_CLK_SDHC3_IPG_GATE] = imx_clk_gate("sdhc3_ipg_gate", "ipg", CCM_PCCR0, 3); - clk[IMX27_CLK_SDHC2_IPG_GATE] = imx_clk_gate("sdhc2_ipg_gate", "ipg", CCM_PCCR0, 4); - clk[IMX27_CLK_SDHC1_IPG_GATE] = imx_clk_gate("sdhc1_ipg_gate", "ipg", CCM_PCCR0, 5); - clk[IMX27_CLK_SCC_IPG_GATE] = imx_clk_gate("scc_ipg_gate", "ipg", CCM_PCCR0, 6); - clk[IMX27_CLK_SAHARA_IPG_GATE] = imx_clk_gate("sahara_ipg_gate", "ipg", CCM_PCCR0, 7); - clk[IMX27_CLK_RTIC_IPG_GATE] = imx_clk_gate("rtic_ipg_gate", "ipg", CCM_PCCR0, 8); - clk[IMX27_CLK_RTC_IPG_GATE] = imx_clk_gate("rtc_ipg_gate", "ipg", CCM_PCCR0, 9); - clk[IMX27_CLK_PWM_IPG_GATE] = imx_clk_gate("pwm_ipg_gate", "ipg", CCM_PCCR0, 11); - clk[IMX27_CLK_OWIRE_IPG_GATE] = imx_clk_gate("owire_ipg_gate", "ipg", CCM_PCCR0, 12); - clk[IMX27_CLK_MSHC_IPG_GATE] = imx_clk_gate("mshc_ipg_gate", "ipg", CCM_PCCR0, 13); - clk[IMX27_CLK_LCDC_IPG_GATE] = imx_clk_gate("lcdc_ipg_gate", "ipg", CCM_PCCR0, 14); - clk[IMX27_CLK_KPP_IPG_GATE] = imx_clk_gate("kpp_ipg_gate", "ipg", CCM_PCCR0, 15); - clk[IMX27_CLK_IIM_IPG_GATE] = imx_clk_gate("iim_ipg_gate", "ipg", CCM_PCCR0, 16); - clk[IMX27_CLK_I2C2_IPG_GATE] = imx_clk_gate("i2c2_ipg_gate", "ipg", CCM_PCCR0, 17); - clk[IMX27_CLK_I2C1_IPG_GATE] = imx_clk_gate("i2c1_ipg_gate", "ipg", CCM_PCCR0, 18); - clk[IMX27_CLK_GPT6_IPG_GATE] = imx_clk_gate("gpt6_ipg_gate", "ipg", CCM_PCCR0, 19); - clk[IMX27_CLK_GPT5_IPG_GATE] = imx_clk_gate("gpt5_ipg_gate", "ipg", CCM_PCCR0, 20); - clk[IMX27_CLK_GPT4_IPG_GATE] = imx_clk_gate("gpt4_ipg_gate", "ipg", CCM_PCCR0, 21); - clk[IMX27_CLK_GPT3_IPG_GATE] = imx_clk_gate("gpt3_ipg_gate", "ipg", CCM_PCCR0, 22); - clk[IMX27_CLK_GPT2_IPG_GATE] = imx_clk_gate("gpt2_ipg_gate", "ipg", CCM_PCCR0, 23); - clk[IMX27_CLK_GPT1_IPG_GATE] = imx_clk_gate("gpt1_ipg_gate", "ipg", CCM_PCCR0, 24); - clk[IMX27_CLK_GPIO_IPG_GATE] = imx_clk_gate("gpio_ipg_gate", "ipg", CCM_PCCR0, 25); - clk[IMX27_CLK_FEC_IPG_GATE] = imx_clk_gate("fec_ipg_gate", "ipg", CCM_PCCR0, 26); - clk[IMX27_CLK_EMMA_IPG_GATE] = imx_clk_gate("emma_ipg_gate", "ipg", CCM_PCCR0, 27); - clk[IMX27_CLK_DMA_IPG_GATE] = imx_clk_gate("dma_ipg_gate", "ipg", CCM_PCCR0, 28); - clk[IMX27_CLK_CSPI3_IPG_GATE] = imx_clk_gate("cspi3_ipg_gate", "ipg", CCM_PCCR0, 29); - clk[IMX27_CLK_CSPI2_IPG_GATE] = imx_clk_gate("cspi2_ipg_gate", "ipg", CCM_PCCR0, 30); - clk[IMX27_CLK_CSPI1_IPG_GATE] = imx_clk_gate("cspi1_ipg_gate", "ipg", CCM_PCCR0, 31); - clk[IMX27_CLK_MSHC_BAUD_GATE] = imx_clk_gate("mshc_baud_gate", "mshc_div", CCM_PCCR1, 2); - clk[IMX27_CLK_NFC_BAUD_GATE] = imx_clk_gate("nfc_baud_gate", "nfc_div", CCM_PCCR1, 3); - clk[IMX27_CLK_SSI2_BAUD_GATE] = imx_clk_gate("ssi2_baud_gate", "ssi2_div", CCM_PCCR1, 4); - clk[IMX27_CLK_SSI1_BAUD_GATE] = imx_clk_gate("ssi1_baud_gate", "ssi1_div", CCM_PCCR1, 5); - clk[IMX27_CLK_VPU_BAUD_GATE] = imx_clk_gate("vpu_baud_gate", "vpu_div", CCM_PCCR1, 6); - clk[IMX27_CLK_PER4_GATE] = imx_clk_gate("per4_gate", "per4_div", CCM_PCCR1, 7); - clk[IMX27_CLK_PER3_GATE] = imx_clk_gate("per3_gate", "per3_div", CCM_PCCR1, 8); - clk[IMX27_CLK_PER2_GATE] = imx_clk_gate("per2_gate", "per2_div", CCM_PCCR1, 9); - clk[IMX27_CLK_PER1_GATE] = imx_clk_gate("per1_gate", "per1_div", CCM_PCCR1, 10); - clk[IMX27_CLK_USB_AHB_GATE] = imx_clk_gate("usb_ahb_gate", "ahb", CCM_PCCR1, 11); - clk[IMX27_CLK_SLCDC_AHB_GATE] = imx_clk_gate("slcdc_ahb_gate", "ahb", CCM_PCCR1, 12); - clk[IMX27_CLK_SAHARA_AHB_GATE] = imx_clk_gate("sahara_ahb_gate", "ahb", CCM_PCCR1, 13); - clk[IMX27_CLK_RTIC_AHB_GATE] = imx_clk_gate("rtic_ahb_gate", "ahb", CCM_PCCR1, 14); - clk[IMX27_CLK_LCDC_AHB_GATE] = imx_clk_gate("lcdc_ahb_gate", "ahb", CCM_PCCR1, 15); - clk[IMX27_CLK_VPU_AHB_GATE] = imx_clk_gate("vpu_ahb_gate", "ahb", CCM_PCCR1, 16); - clk[IMX27_CLK_FEC_AHB_GATE] = imx_clk_gate("fec_ahb_gate", "ahb", CCM_PCCR1, 17); - clk[IMX27_CLK_EMMA_AHB_GATE] = imx_clk_gate("emma_ahb_gate", "ahb", CCM_PCCR1, 18); - clk[IMX27_CLK_EMI_AHB_GATE] = imx_clk_gate("emi_ahb_gate", "ahb", CCM_PCCR1, 19); - clk[IMX27_CLK_DMA_AHB_GATE] = imx_clk_gate("dma_ahb_gate", "ahb", CCM_PCCR1, 20); - clk[IMX27_CLK_CSI_AHB_GATE] = imx_clk_gate("csi_ahb_gate", "ahb", CCM_PCCR1, 21); - clk[IMX27_CLK_BROM_AHB_GATE] = imx_clk_gate("brom_ahb_gate", "ahb", CCM_PCCR1, 22); - clk[IMX27_CLK_ATA_AHB_GATE] = imx_clk_gate("ata_ahb_gate", "ahb", CCM_PCCR1, 23); - clk[IMX27_CLK_WDOG_IPG_GATE] = imx_clk_gate("wdog_ipg_gate", "ipg", CCM_PCCR1, 24); - clk[IMX27_CLK_USB_IPG_GATE] = imx_clk_gate("usb_ipg_gate", "ipg", CCM_PCCR1, 25); - clk[IMX27_CLK_UART6_IPG_GATE] = imx_clk_gate("uart6_ipg_gate", "ipg", CCM_PCCR1, 26); - clk[IMX27_CLK_UART5_IPG_GATE] = imx_clk_gate("uart5_ipg_gate", "ipg", CCM_PCCR1, 27); - clk[IMX27_CLK_UART4_IPG_GATE] = imx_clk_gate("uart4_ipg_gate", "ipg", CCM_PCCR1, 28); - clk[IMX27_CLK_UART3_IPG_GATE] = imx_clk_gate("uart3_ipg_gate", "ipg", CCM_PCCR1, 29); - clk[IMX27_CLK_UART2_IPG_GATE] = imx_clk_gate("uart2_ipg_gate", "ipg", CCM_PCCR1, 30); - clk[IMX27_CLK_UART1_IPG_GATE] = imx_clk_gate("uart1_ipg_gate", "ipg", CCM_PCCR1, 31); - - imx_check_clocks(clk, ARRAY_SIZE(clk)); - - clk_register_clkdev(clk[IMX27_CLK_CPU_DIV], NULL, "cpu0"); - - clk_prepare_enable(clk[IMX27_CLK_EMI_AHB_GATE]); - - imx_print_silicon_rev("i.MX27", mx27_revision()); -} - -int __init mx27_clocks_init(unsigned long fref) -{ - ccm = ioremap(MX27_CCM_BASE_ADDR, SZ_4K); - - _mx27_clocks_init(fref); - - clk_register_clkdev(clk[IMX27_CLK_UART1_IPG_GATE], "ipg", "imx21-uart.0"); - clk_register_clkdev(clk[IMX27_CLK_PER1_GATE], "per", "imx21-uart.0"); - clk_register_clkdev(clk[IMX27_CLK_UART2_IPG_GATE], "ipg", "imx21-uart.1"); - clk_register_clkdev(clk[IMX27_CLK_PER1_GATE], "per", "imx21-uart.1"); - clk_register_clkdev(clk[IMX27_CLK_UART3_IPG_GATE], "ipg", "imx21-uart.2"); - clk_register_clkdev(clk[IMX27_CLK_PER1_GATE], "per", "imx21-uart.2"); - clk_register_clkdev(clk[IMX27_CLK_UART4_IPG_GATE], "ipg", "imx21-uart.3"); - clk_register_clkdev(clk[IMX27_CLK_PER1_GATE], "per", "imx21-uart.3"); - clk_register_clkdev(clk[IMX27_CLK_UART5_IPG_GATE], "ipg", "imx21-uart.4"); - clk_register_clkdev(clk[IMX27_CLK_PER1_GATE], "per", "imx21-uart.4"); - clk_register_clkdev(clk[IMX27_CLK_UART6_IPG_GATE], "ipg", "imx21-uart.5"); - clk_register_clkdev(clk[IMX27_CLK_PER1_GATE], "per", "imx21-uart.5"); - clk_register_clkdev(clk[IMX27_CLK_GPT1_IPG_GATE], "ipg", "imx-gpt.0"); - clk_register_clkdev(clk[IMX27_CLK_PER1_GATE], "per", "imx-gpt.0"); - clk_register_clkdev(clk[IMX27_CLK_PER2_GATE], "per", "imx21-mmc.0"); - clk_register_clkdev(clk[IMX27_CLK_SDHC1_IPG_GATE], "ipg", "imx21-mmc.0"); - clk_register_clkdev(clk[IMX27_CLK_PER2_GATE], "per", "imx21-mmc.1"); - clk_register_clkdev(clk[IMX27_CLK_SDHC2_IPG_GATE], "ipg", "imx21-mmc.1"); - clk_register_clkdev(clk[IMX27_CLK_PER2_GATE], "per", "imx21-mmc.2"); - clk_register_clkdev(clk[IMX27_CLK_SDHC2_IPG_GATE], "ipg", "imx21-mmc.2"); - clk_register_clkdev(clk[IMX27_CLK_PER2_GATE], "per", "imx27-cspi.0"); - clk_register_clkdev(clk[IMX27_CLK_CSPI1_IPG_GATE], "ipg", "imx27-cspi.0"); - clk_register_clkdev(clk[IMX27_CLK_PER2_GATE], "per", "imx27-cspi.1"); - clk_register_clkdev(clk[IMX27_CLK_CSPI2_IPG_GATE], "ipg", "imx27-cspi.1"); - clk_register_clkdev(clk[IMX27_CLK_PER2_GATE], "per", "imx27-cspi.2"); - clk_register_clkdev(clk[IMX27_CLK_CSPI3_IPG_GATE], "ipg", "imx27-cspi.2"); - clk_register_clkdev(clk[IMX27_CLK_PER3_GATE], "per", "imx21-fb.0"); - clk_register_clkdev(clk[IMX27_CLK_LCDC_IPG_GATE], "ipg", "imx21-fb.0"); - clk_register_clkdev(clk[IMX27_CLK_LCDC_AHB_GATE], "ahb", "imx21-fb.0"); - clk_register_clkdev(clk[IMX27_CLK_CSI_AHB_GATE], "ahb", "imx27-camera.0"); - clk_register_clkdev(clk[IMX27_CLK_PER4_GATE], "per", "imx27-camera.0"); - clk_register_clkdev(clk[IMX27_CLK_USB_DIV], "per", "imx-udc-mx27"); - clk_register_clkdev(clk[IMX27_CLK_USB_IPG_GATE], "ipg", "imx-udc-mx27"); - clk_register_clkdev(clk[IMX27_CLK_USB_AHB_GATE], "ahb", "imx-udc-mx27"); - clk_register_clkdev(clk[IMX27_CLK_USB_DIV], "per", "mxc-ehci.0"); - clk_register_clkdev(clk[IMX27_CLK_USB_IPG_GATE], "ipg", "mxc-ehci.0"); - clk_register_clkdev(clk[IMX27_CLK_USB_AHB_GATE], "ahb", "mxc-ehci.0"); - clk_register_clkdev(clk[IMX27_CLK_USB_DIV], "per", "mxc-ehci.1"); - clk_register_clkdev(clk[IMX27_CLK_USB_IPG_GATE], "ipg", "mxc-ehci.1"); - clk_register_clkdev(clk[IMX27_CLK_USB_AHB_GATE], "ahb", "mxc-ehci.1"); - clk_register_clkdev(clk[IMX27_CLK_USB_DIV], "per", "mxc-ehci.2"); - clk_register_clkdev(clk[IMX27_CLK_USB_IPG_GATE], "ipg", "mxc-ehci.2"); - clk_register_clkdev(clk[IMX27_CLK_USB_AHB_GATE], "ahb", "mxc-ehci.2"); - clk_register_clkdev(clk[IMX27_CLK_SSI1_IPG_GATE], NULL, "imx-ssi.0"); - clk_register_clkdev(clk[IMX27_CLK_SSI2_IPG_GATE], NULL, "imx-ssi.1"); - clk_register_clkdev(clk[IMX27_CLK_NFC_BAUD_GATE], NULL, "imx27-nand.0"); - clk_register_clkdev(clk[IMX27_CLK_VPU_BAUD_GATE], "per", "coda-imx27.0"); - clk_register_clkdev(clk[IMX27_CLK_VPU_AHB_GATE], "ahb", "coda-imx27.0"); - clk_register_clkdev(clk[IMX27_CLK_DMA_AHB_GATE], "ahb", "imx27-dma"); - clk_register_clkdev(clk[IMX27_CLK_DMA_IPG_GATE], "ipg", "imx27-dma"); - clk_register_clkdev(clk[IMX27_CLK_FEC_IPG_GATE], "ipg", "imx27-fec.0"); - clk_register_clkdev(clk[IMX27_CLK_FEC_AHB_GATE], "ahb", "imx27-fec.0"); - clk_register_clkdev(clk[IMX27_CLK_WDOG_IPG_GATE], NULL, "imx2-wdt.0"); - clk_register_clkdev(clk[IMX27_CLK_I2C1_IPG_GATE], NULL, "imx21-i2c.0"); - clk_register_clkdev(clk[IMX27_CLK_I2C2_IPG_GATE], NULL, "imx21-i2c.1"); - clk_register_clkdev(clk[IMX27_CLK_OWIRE_IPG_GATE], NULL, "mxc_w1.0"); - clk_register_clkdev(clk[IMX27_CLK_KPP_IPG_GATE], NULL, "imx-keypad"); - clk_register_clkdev(clk[IMX27_CLK_EMMA_AHB_GATE], "emma-ahb", "imx27-camera.0"); - clk_register_clkdev(clk[IMX27_CLK_EMMA_IPG_GATE], "emma-ipg", "imx27-camera.0"); - clk_register_clkdev(clk[IMX27_CLK_EMMA_AHB_GATE], "ahb", "m2m-emmaprp.0"); - clk_register_clkdev(clk[IMX27_CLK_EMMA_IPG_GATE], "ipg", "m2m-emmaprp.0"); - - mxc_timer_init(MX27_IO_ADDRESS(MX27_GPT1_BASE_ADDR), MX27_INT_GPT1); - - return 0; -} - -static void __init mx27_clocks_init_dt(struct device_node *np) -{ - struct device_node *refnp; - u32 fref = 26000000; /* default */ - - for_each_compatible_node(refnp, NULL, "fixed-clock") { - if (!of_device_is_compatible(refnp, "fsl,imx-osc26m")) - continue; - - if (!of_property_read_u32(refnp, "clock-frequency", &fref)) - break; - } - - ccm = of_iomap(np, 0); - - _mx27_clocks_init(fref); - - clk_data.clks = clk; - clk_data.clk_num = ARRAY_SIZE(clk); - of_clk_add_provider(np, of_clk_src_onecell_get, &clk_data); -} -CLK_OF_DECLARE(imx27_ccm, "fsl,imx27-ccm", mx27_clocks_init_dt); diff --git a/arch/arm/mach-imx/clk-imx31.c b/arch/arm/mach-imx/clk-imx31.c deleted file mode 100644 index 286ef422c..000000000 --- a/arch/arm/mach-imx/clk-imx31.c +++ /dev/null @@ -1,204 +0,0 @@ -/* - * Copyright (C) 2012 Sascha Hauer <kernel@pengutronix.de> - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version 2 - * of the License, or (at your option) any later version. - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation. - */ - -#include <linux/module.h> -#include <linux/clk.h> -#include <linux/clkdev.h> -#include <linux/io.h> -#include <linux/err.h> -#include <linux/of.h> - -#include "clk.h" -#include "common.h" -#include "crmregs-imx3.h" -#include "hardware.h" -#include "mx31.h" - -static const char *mcu_main_sel[] = { "spll", "mpll", }; -static const char *per_sel[] = { "per_div", "ipg", }; -static const char *csi_sel[] = { "upll", "spll", }; -static const char *fir_sel[] = { "mcu_main", "upll", "spll" }; - -enum mx31_clks { - dummy, ckih, ckil, mpll, spll, upll, mcu_main, hsp, ahb, nfc, ipg, - per_div, per, csi, fir, csi_div, usb_div_pre, usb_div_post, fir_div_pre, - fir_div_post, sdhc1_gate, sdhc2_gate, gpt_gate, epit1_gate, epit2_gate, - iim_gate, ata_gate, sdma_gate, cspi3_gate, rng_gate, uart1_gate, - uart2_gate, ssi1_gate, i2c1_gate, i2c2_gate, i2c3_gate, hantro_gate, - mstick1_gate, mstick2_gate, csi_gate, rtc_gate, wdog_gate, pwm_gate, - sim_gate, ect_gate, usb_gate, kpp_gate, ipu_gate, uart3_gate, - uart4_gate, uart5_gate, owire_gate, ssi2_gate, cspi1_gate, cspi2_gate, - gacc_gate, emi_gate, rtic_gate, firi_gate, clk_max -}; - -static struct clk *clk[clk_max]; -static struct clk_onecell_data clk_data; - -int __init mx31_clocks_init(unsigned long fref) -{ - void __iomem *base = MX31_IO_ADDRESS(MX31_CCM_BASE_ADDR); - struct device_node *np; - - clk[dummy] = imx_clk_fixed("dummy", 0); - clk[ckih] = imx_clk_fixed("ckih", fref); - clk[ckil] = imx_clk_fixed("ckil", 32768); - clk[mpll] = imx_clk_pllv1("mpll", "ckih", base + MXC_CCM_MPCTL); - clk[spll] = imx_clk_pllv1("spll", "ckih", base + MXC_CCM_SRPCTL); - clk[upll] = imx_clk_pllv1("upll", "ckih", base + MXC_CCM_UPCTL); - clk[mcu_main] = imx_clk_mux("mcu_main", base + MXC_CCM_PMCR0, 31, 1, mcu_main_sel, ARRAY_SIZE(mcu_main_sel)); - clk[hsp] = imx_clk_divider("hsp", "mcu_main", base + MXC_CCM_PDR0, 11, 3); - clk[ahb] = imx_clk_divider("ahb", "mcu_main", base + MXC_CCM_PDR0, 3, 3); - clk[nfc] = imx_clk_divider("nfc", "ahb", base + MXC_CCM_PDR0, 8, 3); - clk[ipg] = imx_clk_divider("ipg", "ahb", base + MXC_CCM_PDR0, 6, 2); - clk[per_div] = imx_clk_divider("per_div", "upll", base + MXC_CCM_PDR0, 16, 5); - clk[per] = imx_clk_mux("per", base + MXC_CCM_CCMR, 24, 1, per_sel, ARRAY_SIZE(per_sel)); - clk[csi] = imx_clk_mux("csi_sel", base + MXC_CCM_CCMR, 25, 1, csi_sel, ARRAY_SIZE(csi_sel)); - clk[fir] = imx_clk_mux("fir_sel", base + MXC_CCM_CCMR, 11, 2, fir_sel, ARRAY_SIZE(fir_sel)); - clk[csi_div] = imx_clk_divider("csi_div", "csi_sel", base + MXC_CCM_PDR0, 23, 9); - clk[usb_div_pre] = imx_clk_divider("usb_div_pre", "upll", base + MXC_CCM_PDR1, 30, 2); - clk[usb_div_post] = imx_clk_divider("usb_div_post", "usb_div_pre", base + MXC_CCM_PDR1, 27, 3); - clk[fir_div_pre] = imx_clk_divider("fir_div_pre", "fir_sel", base + MXC_CCM_PDR1, 24, 3); - clk[fir_div_post] = imx_clk_divider("fir_div_post", "fir_div_pre", base + MXC_CCM_PDR1, 23, 6); - clk[sdhc1_gate] = imx_clk_gate2("sdhc1_gate", "per", base + MXC_CCM_CGR0, 0); - clk[sdhc2_gate] = imx_clk_gate2("sdhc2_gate", "per", base + MXC_CCM_CGR0, 2); - clk[gpt_gate] = imx_clk_gate2("gpt_gate", "per", base + MXC_CCM_CGR0, 4); - clk[epit1_gate] = imx_clk_gate2("epit1_gate", "per", base + MXC_CCM_CGR0, 6); - clk[epit2_gate] = imx_clk_gate2("epit2_gate", "per", base + MXC_CCM_CGR0, 8); - clk[iim_gate] = imx_clk_gate2("iim_gate", "ipg", base + MXC_CCM_CGR0, 10); - clk[ata_gate] = imx_clk_gate2("ata_gate", "ipg", base + MXC_CCM_CGR0, 12); - clk[sdma_gate] = imx_clk_gate2("sdma_gate", "ahb", base + MXC_CCM_CGR0, 14); - clk[cspi3_gate] = imx_clk_gate2("cspi3_gate", "ipg", base + MXC_CCM_CGR0, 16); - clk[rng_gate] = imx_clk_gate2("rng_gate", "ipg", base + MXC_CCM_CGR0, 18); - clk[uart1_gate] = imx_clk_gate2("uart1_gate", "per", base + MXC_CCM_CGR0, 20); - clk[uart2_gate] = imx_clk_gate2("uart2_gate", "per", base + MXC_CCM_CGR0, 22); - clk[ssi1_gate] = imx_clk_gate2("ssi1_gate", "spll", base + MXC_CCM_CGR0, 24); - clk[i2c1_gate] = imx_clk_gate2("i2c1_gate", "per", base + MXC_CCM_CGR0, 26); - clk[i2c2_gate] = imx_clk_gate2("i2c2_gate", "per", base + MXC_CCM_CGR0, 28); - clk[i2c3_gate] = imx_clk_gate2("i2c3_gate", "per", base + MXC_CCM_CGR0, 30); - clk[hantro_gate] = imx_clk_gate2("hantro_gate", "per", base + MXC_CCM_CGR1, 0); - clk[mstick1_gate] = imx_clk_gate2("mstick1_gate", "per", base + MXC_CCM_CGR1, 2); - clk[mstick2_gate] = imx_clk_gate2("mstick2_gate", "per", base + MXC_CCM_CGR1, 4); - clk[csi_gate] = imx_clk_gate2("csi_gate", "csi_div", base + MXC_CCM_CGR1, 6); - clk[rtc_gate] = imx_clk_gate2("rtc_gate", "ipg", base + MXC_CCM_CGR1, 8); - clk[wdog_gate] = imx_clk_gate2("wdog_gate", "ipg", base + MXC_CCM_CGR1, 10); - clk[pwm_gate] = imx_clk_gate2("pwm_gate", "per", base + MXC_CCM_CGR1, 12); - clk[sim_gate] = imx_clk_gate2("sim_gate", "per", base + MXC_CCM_CGR1, 14); - clk[ect_gate] = imx_clk_gate2("ect_gate", "per", base + MXC_CCM_CGR1, 16); - clk[usb_gate] = imx_clk_gate2("usb_gate", "ahb", base + MXC_CCM_CGR1, 18); - clk[kpp_gate] = imx_clk_gate2("kpp_gate", "ipg", base + MXC_CCM_CGR1, 20); - clk[ipu_gate] = imx_clk_gate2("ipu_gate", "hsp", base + MXC_CCM_CGR1, 22); - clk[uart3_gate] = imx_clk_gate2("uart3_gate", "per", base + MXC_CCM_CGR1, 24); - clk[uart4_gate] = imx_clk_gate2("uart4_gate", "per", base + MXC_CCM_CGR1, 26); - clk[uart5_gate] = imx_clk_gate2("uart5_gate", "per", base + MXC_CCM_CGR1, 28); - clk[owire_gate] = imx_clk_gate2("owire_gate", "per", base + MXC_CCM_CGR1, 30); - clk[ssi2_gate] = imx_clk_gate2("ssi2_gate", "spll", base + MXC_CCM_CGR2, 0); - clk[cspi1_gate] = imx_clk_gate2("cspi1_gate", "ipg", base + MXC_CCM_CGR2, 2); - clk[cspi2_gate] = imx_clk_gate2("cspi2_gate", "ipg", base + MXC_CCM_CGR2, 4); - clk[gacc_gate] = imx_clk_gate2("gacc_gate", "per", base + MXC_CCM_CGR2, 6); - clk[emi_gate] = imx_clk_gate2("emi_gate", "ahb", base + MXC_CCM_CGR2, 8); - clk[rtic_gate] = imx_clk_gate2("rtic_gate", "ahb", base + MXC_CCM_CGR2, 10); - clk[firi_gate] = imx_clk_gate2("firi_gate", "upll", base+MXC_CCM_CGR2, 12); - - imx_check_clocks(clk, ARRAY_SIZE(clk)); - - np = of_find_compatible_node(NULL, NULL, "fsl,imx31-ccm"); - - if (np) { - clk_data.clks = clk; - clk_data.clk_num = ARRAY_SIZE(clk); - of_clk_add_provider(np, of_clk_src_onecell_get, &clk_data); - } - - clk_register_clkdev(clk[gpt_gate], "per", "imx-gpt.0"); - clk_register_clkdev(clk[ipg], "ipg", "imx-gpt.0"); - clk_register_clkdev(clk[cspi1_gate], NULL, "imx31-cspi.0"); - clk_register_clkdev(clk[cspi2_gate], NULL, "imx31-cspi.1"); - clk_register_clkdev(clk[cspi3_gate], NULL, "imx31-cspi.2"); - clk_register_clkdev(clk[pwm_gate], "pwm", NULL); - clk_register_clkdev(clk[wdog_gate], NULL, "imx2-wdt.0"); - clk_register_clkdev(clk[rtc_gate], NULL, "imx21-rtc"); - clk_register_clkdev(clk[epit1_gate], "epit", NULL); - clk_register_clkdev(clk[epit2_gate], "epit", NULL); - clk_register_clkdev(clk[nfc], NULL, "imx27-nand.0"); - clk_register_clkdev(clk[ipu_gate], NULL, "ipu-core"); - clk_register_clkdev(clk[ipu_gate], NULL, "mx3_sdc_fb"); - clk_register_clkdev(clk[kpp_gate], NULL, "imx-keypad"); - clk_register_clkdev(clk[usb_div_post], "per", "mxc-ehci.0"); - clk_register_clkdev(clk[usb_gate], "ahb", "mxc-ehci.0"); - clk_register_clkdev(clk[ipg], "ipg", "mxc-ehci.0"); - clk_register_clkdev(clk[usb_div_post], "per", "mxc-ehci.1"); - clk_register_clkdev(clk[usb_gate], "ahb", "mxc-ehci.1"); - clk_register_clkdev(clk[ipg], "ipg", "mxc-ehci.1"); - clk_register_clkdev(clk[usb_div_post], "per", "mxc-ehci.2"); - clk_register_clkdev(clk[usb_gate], "ahb", "mxc-ehci.2"); - clk_register_clkdev(clk[ipg], "ipg", "mxc-ehci.2"); - clk_register_clkdev(clk[usb_div_post], "per", "imx-udc-mx27"); - clk_register_clkdev(clk[usb_gate], "ahb", "imx-udc-mx27"); - clk_register_clkdev(clk[ipg], "ipg", "imx-udc-mx27"); - clk_register_clkdev(clk[csi_gate], NULL, "mx3-camera.0"); - /* i.mx31 has the i.mx21 type uart */ - clk_register_clkdev(clk[uart1_gate], "per", "imx21-uart.0"); - clk_register_clkdev(clk[ipg], "ipg", "imx21-uart.0"); - clk_register_clkdev(clk[uart2_gate], "per", "imx21-uart.1"); - clk_register_clkdev(clk[ipg], "ipg", "imx21-uart.1"); - clk_register_clkdev(clk[uart3_gate], "per", "imx21-uart.2"); - clk_register_clkdev(clk[ipg], "ipg", "imx21-uart.2"); - clk_register_clkdev(clk[uart4_gate], "per", "imx21-uart.3"); - clk_register_clkdev(clk[ipg], "ipg", "imx21-uart.3"); - clk_register_clkdev(clk[uart5_gate], "per", "imx21-uart.4"); - clk_register_clkdev(clk[ipg], "ipg", "imx21-uart.4"); - clk_register_clkdev(clk[i2c1_gate], NULL, "imx21-i2c.0"); - clk_register_clkdev(clk[i2c2_gate], NULL, "imx21-i2c.1"); - clk_register_clkdev(clk[i2c3_gate], NULL, "imx21-i2c.2"); - clk_register_clkdev(clk[owire_gate], NULL, "mxc_w1.0"); - clk_register_clkdev(clk[sdhc1_gate], NULL, "imx31-mmc.0"); - clk_register_clkdev(clk[sdhc2_gate], NULL, "imx31-mmc.1"); - clk_register_clkdev(clk[ssi1_gate], NULL, "imx-ssi.0"); - clk_register_clkdev(clk[ssi2_gate], NULL, "imx-ssi.1"); - clk_register_clkdev(clk[firi_gate], "firi", NULL); - clk_register_clkdev(clk[ata_gate], NULL, "pata_imx"); - clk_register_clkdev(clk[rtic_gate], "rtic", NULL); - clk_register_clkdev(clk[rng_gate], NULL, "mxc_rnga"); - clk_register_clkdev(clk[sdma_gate], NULL, "imx31-sdma"); - clk_register_clkdev(clk[iim_gate], "iim", NULL); - - clk_set_parent(clk[csi], clk[upll]); - clk_prepare_enable(clk[emi_gate]); - clk_prepare_enable(clk[iim_gate]); - mx31_revision(); - clk_disable_unprepare(clk[iim_gate]); - - mxc_timer_init(MX31_IO_ADDRESS(MX31_GPT1_BASE_ADDR), MX31_INT_GPT); - - return 0; -} - -int __init mx31_clocks_init_dt(void) -{ - struct device_node *np; - u32 fref = 26000000; /* default */ - - for_each_compatible_node(np, NULL, "fixed-clock") { - if (!of_device_is_compatible(np, "fsl,imx-osc26m")) - continue; - - if (!of_property_read_u32(np, "clock-frequency", &fref)) - break; - } - - return mx31_clocks_init(fref); -} diff --git a/arch/arm/mach-imx/clk-imx35.c b/arch/arm/mach-imx/clk-imx35.c deleted file mode 100644 index a0d2b57fd..000000000 --- a/arch/arm/mach-imx/clk-imx35.c +++ /dev/null @@ -1,296 +0,0 @@ -/* - * Copyright (C) 2012 Sascha Hauer, Pengutronix <s.hauer@pengutronix.de> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - */ -#include <linux/mm.h> -#include <linux/delay.h> -#include <linux/clk.h> -#include <linux/io.h> -#include <linux/clkdev.h> -#include <linux/of.h> -#include <linux/err.h> - -#include "crmregs-imx3.h" -#include "clk.h" -#include "common.h" -#include "hardware.h" - -struct arm_ahb_div { - unsigned char arm, ahb, sel; -}; - -static struct arm_ahb_div clk_consumer[] = { - { .arm = 1, .ahb = 4, .sel = 0}, - { .arm = 1, .ahb = 3, .sel = 1}, - { .arm = 2, .ahb = 2, .sel = 0}, - { .arm = 0, .ahb = 0, .sel = 0}, - { .arm = 0, .ahb = 0, .sel = 0}, - { .arm = 0, .ahb = 0, .sel = 0}, - { .arm = 4, .ahb = 1, .sel = 0}, - { .arm = 1, .ahb = 5, .sel = 0}, - { .arm = 1, .ahb = 8, .sel = 0}, - { .arm = 1, .ahb = 6, .sel = 1}, - { .arm = 2, .ahb = 4, .sel = 0}, - { .arm = 0, .ahb = 0, .sel = 0}, - { .arm = 0, .ahb = 0, .sel = 0}, - { .arm = 0, .ahb = 0, .sel = 0}, - { .arm = 4, .ahb = 2, .sel = 0}, - { .arm = 0, .ahb = 0, .sel = 0}, -}; - -static char hsp_div_532[] = { 4, 8, 3, 0 }; -static char hsp_div_400[] = { 3, 6, 3, 0 }; - -static struct clk_onecell_data clk_data; - -static const char *std_sel[] = {"ppll", "arm"}; -static const char *ipg_per_sel[] = {"ahb_per_div", "arm_per_div"}; - -enum mx35_clks { - ckih, mpll, ppll, mpll_075, arm, hsp, hsp_div, hsp_sel, ahb, ipg, - arm_per_div, ahb_per_div, ipg_per, uart_sel, uart_div, esdhc_sel, - esdhc1_div, esdhc2_div, esdhc3_div, spdif_sel, spdif_div_pre, - spdif_div_post, ssi_sel, ssi1_div_pre, ssi1_div_post, ssi2_div_pre, - ssi2_div_post, usb_sel, usb_div, nfc_div, asrc_gate, pata_gate, - audmux_gate, can1_gate, can2_gate, cspi1_gate, cspi2_gate, ect_gate, - edio_gate, emi_gate, epit1_gate, epit2_gate, esai_gate, esdhc1_gate, - esdhc2_gate, esdhc3_gate, fec_gate, gpio1_gate, gpio2_gate, gpio3_gate, - gpt_gate, i2c1_gate, i2c2_gate, i2c3_gate, iomuxc_gate, ipu_gate, - kpp_gate, mlb_gate, mshc_gate, owire_gate, pwm_gate, rngc_gate, - rtc_gate, rtic_gate, scc_gate, sdma_gate, spba_gate, spdif_gate, - ssi1_gate, ssi2_gate, uart1_gate, uart2_gate, uart3_gate, usbotg_gate, - wdog_gate, max_gate, admux_gate, csi_gate, csi_div, csi_sel, iim_gate, - gpu2d_gate, clk_max -}; - -static struct clk *clk[clk_max]; - -int __init mx35_clocks_init(void) -{ - void __iomem *base = MX35_IO_ADDRESS(MX35_CCM_BASE_ADDR); - u32 pdr0, consumer_sel, hsp_sel; - struct arm_ahb_div *aad; - unsigned char *hsp_div; - - pdr0 = __raw_readl(base + MXC_CCM_PDR0); - consumer_sel = (pdr0 >> 16) & 0xf; - aad = &clk_consumer[consumer_sel]; - if (!aad->arm) { - pr_err("i.MX35 clk: illegal consumer mux selection 0x%x\n", consumer_sel); - /* - * We are basically stuck. Continue with a default entry and hope we - * get far enough to actually show the above message - */ - aad = &clk_consumer[0]; - } - - clk[ckih] = imx_clk_fixed("ckih", 24000000); - clk[mpll] = imx_clk_pllv1("mpll", "ckih", base + MX35_CCM_MPCTL); - clk[ppll] = imx_clk_pllv1("ppll", "ckih", base + MX35_CCM_PPCTL); - - clk[mpll] = imx_clk_fixed_factor("mpll_075", "mpll", 3, 4); - - if (aad->sel) - clk[arm] = imx_clk_fixed_factor("arm", "mpll_075", 1, aad->arm); - else - clk[arm] = imx_clk_fixed_factor("arm", "mpll", 1, aad->arm); - - if (clk_get_rate(clk[arm]) > 400000000) - hsp_div = hsp_div_532; - else - hsp_div = hsp_div_400; - - hsp_sel = (pdr0 >> 20) & 0x3; - if (!hsp_div[hsp_sel]) { - pr_err("i.MX35 clk: illegal hsp clk selection 0x%x\n", hsp_sel); - hsp_sel = 0; - } - - clk[hsp] = imx_clk_fixed_factor("hsp", "arm", 1, hsp_div[hsp_sel]); - - clk[ahb] = imx_clk_fixed_factor("ahb", "arm", 1, aad->ahb); - clk[ipg] = imx_clk_fixed_factor("ipg", "ahb", 1, 2); - - clk[arm_per_div] = imx_clk_divider("arm_per_div", "arm", base + MX35_CCM_PDR4, 16, 6); - clk[ahb_per_div] = imx_clk_divider("ahb_per_div", "ahb", base + MXC_CCM_PDR0, 12, 3); - clk[ipg_per] = imx_clk_mux("ipg_per", base + MXC_CCM_PDR0, 26, 1, ipg_per_sel, ARRAY_SIZE(ipg_per_sel)); - - clk[uart_sel] = imx_clk_mux("uart_sel", base + MX35_CCM_PDR3, 14, 1, std_sel, ARRAY_SIZE(std_sel)); - clk[uart_div] = imx_clk_divider("uart_div", "uart_sel", base + MX35_CCM_PDR4, 10, 6); - - clk[esdhc_sel] = imx_clk_mux("esdhc_sel", base + MX35_CCM_PDR4, 9, 1, std_sel, ARRAY_SIZE(std_sel)); - clk[esdhc1_div] = imx_clk_divider("esdhc1_div", "esdhc_sel", base + MX35_CCM_PDR3, 0, 6); - clk[esdhc2_div] = imx_clk_divider("esdhc2_div", "esdhc_sel", base + MX35_CCM_PDR3, 8, 6); - clk[esdhc3_div] = imx_clk_divider("esdhc3_div", "esdhc_sel", base + MX35_CCM_PDR3, 16, 6); - - clk[spdif_sel] = imx_clk_mux("spdif_sel", base + MX35_CCM_PDR3, 22, 1, std_sel, ARRAY_SIZE(std_sel)); - clk[spdif_div_pre] = imx_clk_divider("spdif_div_pre", "spdif_sel", base + MX35_CCM_PDR3, 29, 3); /* divide by 1 not allowed */ - clk[spdif_div_post] = imx_clk_divider("spdif_div_post", "spdif_div_pre", base + MX35_CCM_PDR3, 23, 6); - - clk[ssi_sel] = imx_clk_mux("ssi_sel", base + MX35_CCM_PDR2, 6, 1, std_sel, ARRAY_SIZE(std_sel)); - clk[ssi1_div_pre] = imx_clk_divider("ssi1_div_pre", "ssi_sel", base + MX35_CCM_PDR2, 24, 3); - clk[ssi1_div_post] = imx_clk_divider("ssi1_div_post", "ssi1_div_pre", base + MX35_CCM_PDR2, 0, 6); - clk[ssi2_div_pre] = imx_clk_divider("ssi2_div_pre", "ssi_sel", base + MX35_CCM_PDR2, 27, 3); - clk[ssi2_div_post] = imx_clk_divider("ssi2_div_post", "ssi2_div_pre", base + MX35_CCM_PDR2, 8, 6); - - clk[usb_sel] = imx_clk_mux("usb_sel", base + MX35_CCM_PDR4, 9, 1, std_sel, ARRAY_SIZE(std_sel)); - clk[usb_div] = imx_clk_divider("usb_div", "usb_sel", base + MX35_CCM_PDR4, 22, 6); - - clk[nfc_div] = imx_clk_divider("nfc_div", "ahb", base + MX35_CCM_PDR4, 28, 4); - - clk[csi_sel] = imx_clk_mux("csi_sel", base + MX35_CCM_PDR2, 7, 1, std_sel, ARRAY_SIZE(std_sel)); - clk[csi_div] = imx_clk_divider("csi_div", "csi_sel", base + MX35_CCM_PDR2, 16, 6); - - clk[asrc_gate] = imx_clk_gate2("asrc_gate", "ipg", base + MX35_CCM_CGR0, 0); - clk[pata_gate] = imx_clk_gate2("pata_gate", "ipg", base + MX35_CCM_CGR0, 2); - clk[audmux_gate] = imx_clk_gate2("audmux_gate", "ipg", base + MX35_CCM_CGR0, 4); - clk[can1_gate] = imx_clk_gate2("can1_gate", "ipg", base + MX35_CCM_CGR0, 6); - clk[can2_gate] = imx_clk_gate2("can2_gate", "ipg", base + MX35_CCM_CGR0, 8); - clk[cspi1_gate] = imx_clk_gate2("cspi1_gate", "ipg", base + MX35_CCM_CGR0, 10); - clk[cspi2_gate] = imx_clk_gate2("cspi2_gate", "ipg", base + MX35_CCM_CGR0, 12); - clk[ect_gate] = imx_clk_gate2("ect_gate", "ipg", base + MX35_CCM_CGR0, 14); - clk[edio_gate] = imx_clk_gate2("edio_gate", "ipg", base + MX35_CCM_CGR0, 16); - clk[emi_gate] = imx_clk_gate2("emi_gate", "ipg", base + MX35_CCM_CGR0, 18); - clk[epit1_gate] = imx_clk_gate2("epit1_gate", "ipg", base + MX35_CCM_CGR0, 20); - clk[epit2_gate] = imx_clk_gate2("epit2_gate", "ipg", base + MX35_CCM_CGR0, 22); - clk[esai_gate] = imx_clk_gate2("esai_gate", "ipg", base + MX35_CCM_CGR0, 24); - clk[esdhc1_gate] = imx_clk_gate2("esdhc1_gate", "esdhc1_div", base + MX35_CCM_CGR0, 26); - clk[esdhc2_gate] = imx_clk_gate2("esdhc2_gate", "esdhc2_div", base + MX35_CCM_CGR0, 28); - clk[esdhc3_gate] = imx_clk_gate2("esdhc3_gate", "esdhc3_div", base + MX35_CCM_CGR0, 30); - - clk[fec_gate] = imx_clk_gate2("fec_gate", "ipg", base + MX35_CCM_CGR1, 0); - clk[gpio1_gate] = imx_clk_gate2("gpio1_gate", "ipg", base + MX35_CCM_CGR1, 2); - clk[gpio2_gate] = imx_clk_gate2("gpio2_gate", "ipg", base + MX35_CCM_CGR1, 4); - clk[gpio3_gate] = imx_clk_gate2("gpio3_gate", "ipg", base + MX35_CCM_CGR1, 6); - clk[gpt_gate] = imx_clk_gate2("gpt_gate", "ipg", base + MX35_CCM_CGR1, 8); - clk[i2c1_gate] = imx_clk_gate2("i2c1_gate", "ipg_per", base + MX35_CCM_CGR1, 10); - clk[i2c2_gate] = imx_clk_gate2("i2c2_gate", "ipg_per", base + MX35_CCM_CGR1, 12); - clk[i2c3_gate] = imx_clk_gate2("i2c3_gate", "ipg_per", base + MX35_CCM_CGR1, 14); - clk[iomuxc_gate] = imx_clk_gate2("iomuxc_gate", "ipg", base + MX35_CCM_CGR1, 16); - clk[ipu_gate] = imx_clk_gate2("ipu_gate", "hsp", base + MX35_CCM_CGR1, 18); - clk[kpp_gate] = imx_clk_gate2("kpp_gate", "ipg", base + MX35_CCM_CGR1, 20); - clk[mlb_gate] = imx_clk_gate2("mlb_gate", "ahb", base + MX35_CCM_CGR1, 22); - clk[mshc_gate] = imx_clk_gate2("mshc_gate", "dummy", base + MX35_CCM_CGR1, 24); - clk[owire_gate] = imx_clk_gate2("owire_gate", "ipg_per", base + MX35_CCM_CGR1, 26); - clk[pwm_gate] = imx_clk_gate2("pwm_gate", "ipg_per", base + MX35_CCM_CGR1, 28); - clk[rngc_gate] = imx_clk_gate2("rngc_gate", "ipg", base + MX35_CCM_CGR1, 30); - - clk[rtc_gate] = imx_clk_gate2("rtc_gate", "ipg", base + MX35_CCM_CGR2, 0); - clk[rtic_gate] = imx_clk_gate2("rtic_gate", "ahb", base + MX35_CCM_CGR2, 2); - clk[scc_gate] = imx_clk_gate2("scc_gate", "ipg", base + MX35_CCM_CGR2, 4); - clk[sdma_gate] = imx_clk_gate2("sdma_gate", "ahb", base + MX35_CCM_CGR2, 6); - clk[spba_gate] = imx_clk_gate2("spba_gate", "ipg", base + MX35_CCM_CGR2, 8); - clk[spdif_gate] = imx_clk_gate2("spdif_gate", "spdif_div_post", base + MX35_CCM_CGR2, 10); - clk[ssi1_gate] = imx_clk_gate2("ssi1_gate", "ssi1_div_post", base + MX35_CCM_CGR2, 12); - clk[ssi2_gate] = imx_clk_gate2("ssi2_gate", "ssi2_div_post", base + MX35_CCM_CGR2, 14); - clk[uart1_gate] = imx_clk_gate2("uart1_gate", "uart_div", base + MX35_CCM_CGR2, 16); - clk[uart2_gate] = imx_clk_gate2("uart2_gate", "uart_div", base + MX35_CCM_CGR2, 18); - clk[uart3_gate] = imx_clk_gate2("uart3_gate", "uart_div", base + MX35_CCM_CGR2, 20); - clk[usbotg_gate] = imx_clk_gate2("usbotg_gate", "ahb", base + MX35_CCM_CGR2, 22); - clk[wdog_gate] = imx_clk_gate2("wdog_gate", "ipg", base + MX35_CCM_CGR2, 24); - clk[max_gate] = imx_clk_gate2("max_gate", "dummy", base + MX35_CCM_CGR2, 26); - clk[admux_gate] = imx_clk_gate2("admux_gate", "ipg", base + MX35_CCM_CGR2, 30); - - clk[csi_gate] = imx_clk_gate2("csi_gate", "csi_div", base + MX35_CCM_CGR3, 0); - clk[iim_gate] = imx_clk_gate2("iim_gate", "ipg", base + MX35_CCM_CGR3, 2); - clk[gpu2d_gate] = imx_clk_gate2("gpu2d_gate", "ahb", base + MX35_CCM_CGR3, 4); - - imx_check_clocks(clk, ARRAY_SIZE(clk)); - - clk_register_clkdev(clk[pata_gate], NULL, "pata_imx"); - clk_register_clkdev(clk[can1_gate], NULL, "flexcan.0"); - clk_register_clkdev(clk[can2_gate], NULL, "flexcan.1"); - clk_register_clkdev(clk[cspi1_gate], "per", "imx35-cspi.0"); - clk_register_clkdev(clk[cspi1_gate], "ipg", "imx35-cspi.0"); - clk_register_clkdev(clk[cspi2_gate], "per", "imx35-cspi.1"); - clk_register_clkdev(clk[cspi2_gate], "ipg", "imx35-cspi.1"); - clk_register_clkdev(clk[epit1_gate], NULL, "imx-epit.0"); - clk_register_clkdev(clk[epit2_gate], NULL, "imx-epit.1"); - clk_register_clkdev(clk[esdhc1_gate], "per", "sdhci-esdhc-imx35.0"); - clk_register_clkdev(clk[ipg], "ipg", "sdhci-esdhc-imx35.0"); - clk_register_clkdev(clk[ahb], "ahb", "sdhci-esdhc-imx35.0"); - clk_register_clkdev(clk[esdhc2_gate], "per", "sdhci-esdhc-imx35.1"); - clk_register_clkdev(clk[ipg], "ipg", "sdhci-esdhc-imx35.1"); - clk_register_clkdev(clk[ahb], "ahb", "sdhci-esdhc-imx35.1"); - clk_register_clkdev(clk[esdhc3_gate], "per", "sdhci-esdhc-imx35.2"); - clk_register_clkdev(clk[ipg], "ipg", "sdhci-esdhc-imx35.2"); - clk_register_clkdev(clk[ahb], "ahb", "sdhci-esdhc-imx35.2"); - /* i.mx35 has the i.mx27 type fec */ - clk_register_clkdev(clk[fec_gate], NULL, "imx27-fec.0"); - clk_register_clkdev(clk[gpt_gate], "per", "imx-gpt.0"); - clk_register_clkdev(clk[ipg], "ipg", "imx-gpt.0"); - clk_register_clkdev(clk[i2c1_gate], NULL, "imx21-i2c.0"); - clk_register_clkdev(clk[i2c2_gate], NULL, "imx21-i2c.1"); - clk_register_clkdev(clk[i2c3_gate], NULL, "imx21-i2c.2"); - clk_register_clkdev(clk[ipu_gate], NULL, "ipu-core"); - clk_register_clkdev(clk[ipu_gate], NULL, "mx3_sdc_fb"); - clk_register_clkdev(clk[kpp_gate], NULL, "imx-keypad"); - clk_register_clkdev(clk[owire_gate], NULL, "mxc_w1"); - clk_register_clkdev(clk[sdma_gate], NULL, "imx35-sdma"); - clk_register_clkdev(clk[ssi1_gate], NULL, "imx-ssi.0"); - clk_register_clkdev(clk[ssi2_gate], NULL, "imx-ssi.1"); - /* i.mx35 has the i.mx21 type uart */ - clk_register_clkdev(clk[uart1_gate], "per", "imx21-uart.0"); - clk_register_clkdev(clk[ipg], "ipg", "imx21-uart.0"); - clk_register_clkdev(clk[uart2_gate], "per", "imx21-uart.1"); - clk_register_clkdev(clk[ipg], "ipg", "imx21-uart.1"); - clk_register_clkdev(clk[uart3_gate], "per", "imx21-uart.2"); - clk_register_clkdev(clk[ipg], "ipg", "imx21-uart.2"); - clk_register_clkdev(clk[usb_div], "per", "mxc-ehci.0"); - clk_register_clkdev(clk[ipg], "ipg", "mxc-ehci.0"); - clk_register_clkdev(clk[usbotg_gate], "ahb", "mxc-ehci.0"); - clk_register_clkdev(clk[usb_div], "per", "mxc-ehci.1"); - clk_register_clkdev(clk[ipg], "ipg", "mxc-ehci.1"); - clk_register_clkdev(clk[usbotg_gate], "ahb", "mxc-ehci.1"); - clk_register_clkdev(clk[usb_div], "per", "mxc-ehci.2"); - clk_register_clkdev(clk[ipg], "ipg", "mxc-ehci.2"); - clk_register_clkdev(clk[usbotg_gate], "ahb", "mxc-ehci.2"); - clk_register_clkdev(clk[usb_div], "per", "imx-udc-mx27"); - clk_register_clkdev(clk[ipg], "ipg", "imx-udc-mx27"); - clk_register_clkdev(clk[usbotg_gate], "ahb", "imx-udc-mx27"); - clk_register_clkdev(clk[wdog_gate], NULL, "imx2-wdt.0"); - clk_register_clkdev(clk[nfc_div], NULL, "imx25-nand.0"); - clk_register_clkdev(clk[csi_gate], NULL, "mx3-camera.0"); - clk_register_clkdev(clk[admux_gate], "audmux", NULL); - - clk_prepare_enable(clk[spba_gate]); - clk_prepare_enable(clk[gpio1_gate]); - clk_prepare_enable(clk[gpio2_gate]); - clk_prepare_enable(clk[gpio3_gate]); - clk_prepare_enable(clk[iim_gate]); - clk_prepare_enable(clk[emi_gate]); - clk_prepare_enable(clk[max_gate]); - clk_prepare_enable(clk[iomuxc_gate]); - - /* - * SCC is needed to boot via mmc after a watchdog reset. The clock code - * before conversion to common clk also enabled UART1 (which isn't - * handled here and not needed for mmc) and IIM (which is enabled - * unconditionally above). - */ - clk_prepare_enable(clk[scc_gate]); - - imx_print_silicon_rev("i.MX35", mx35_revision()); - -#ifdef CONFIG_MXC_USE_EPIT - epit_timer_init(MX35_IO_ADDRESS(MX35_EPIT1_BASE_ADDR), MX35_INT_EPIT1); -#else - mxc_timer_init(MX35_IO_ADDRESS(MX35_GPT1_BASE_ADDR), MX35_INT_GPT); -#endif - - return 0; -} - -static void __init mx35_clocks_init_dt(struct device_node *ccm_node) -{ - clk_data.clks = clk; - clk_data.clk_num = ARRAY_SIZE(clk); - of_clk_add_provider(ccm_node, of_clk_src_onecell_get, &clk_data); - - mx35_clocks_init(); -} -CLK_OF_DECLARE(imx35, "fsl,imx35-ccm", mx35_clocks_init_dt); diff --git a/arch/arm/mach-imx/clk-imx51-imx53.c b/arch/arm/mach-imx/clk-imx51-imx53.c deleted file mode 100644 index 0f7e53614..000000000 --- a/arch/arm/mach-imx/clk-imx51-imx53.c +++ /dev/null @@ -1,573 +0,0 @@ -/* - * Copyright (C) 2011 Sascha Hauer, Pengutronix <s.hauer@pengutronix.de> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - */ -#include <linux/mm.h> -#include <linux/delay.h> -#include <linux/clk.h> -#include <linux/io.h> -#include <linux/clkdev.h> -#include <linux/clk-provider.h> -#include <linux/err.h> -#include <linux/of.h> -#include <linux/of_address.h> -#include <linux/of_irq.h> -#include <dt-bindings/clock/imx5-clock.h> - -#include "clk.h" -#include "common.h" -#include "hardware.h" - -#define MX51_DPLL1_BASE 0x83f80000 -#define MX51_DPLL2_BASE 0x83f84000 -#define MX51_DPLL3_BASE 0x83f88000 - -#define MX53_DPLL1_BASE 0x63f80000 -#define MX53_DPLL2_BASE 0x63f84000 -#define MX53_DPLL3_BASE 0x63f88000 -#define MX53_DPLL4_BASE 0x63f8c000 - -#define MXC_CCM_CCR (ccm_base + 0x00) -#define MXC_CCM_CCDR (ccm_base + 0x04) -#define MXC_CCM_CSR (ccm_base + 0x08) -#define MXC_CCM_CCSR (ccm_base + 0x0c) -#define MXC_CCM_CACRR (ccm_base + 0x10) -#define MXC_CCM_CBCDR (ccm_base + 0x14) -#define MXC_CCM_CBCMR (ccm_base + 0x18) -#define MXC_CCM_CSCMR1 (ccm_base + 0x1c) -#define MXC_CCM_CSCMR2 (ccm_base + 0x20) -#define MXC_CCM_CSCDR1 (ccm_base + 0x24) -#define MXC_CCM_CS1CDR (ccm_base + 0x28) -#define MXC_CCM_CS2CDR (ccm_base + 0x2c) -#define MXC_CCM_CDCDR (ccm_base + 0x30) -#define MXC_CCM_CHSCDR (ccm_base + 0x34) -#define MXC_CCM_CSCDR2 (ccm_base + 0x38) -#define MXC_CCM_CSCDR3 (ccm_base + 0x3c) -#define MXC_CCM_CSCDR4 (ccm_base + 0x40) -#define MXC_CCM_CWDR (ccm_base + 0x44) -#define MXC_CCM_CDHIPR (ccm_base + 0x48) -#define MXC_CCM_CDCR (ccm_base + 0x4c) -#define MXC_CCM_CTOR (ccm_base + 0x50) -#define MXC_CCM_CLPCR (ccm_base + 0x54) -#define MXC_CCM_CISR (ccm_base + 0x58) -#define MXC_CCM_CIMR (ccm_base + 0x5c) -#define MXC_CCM_CCOSR (ccm_base + 0x60) -#define MXC_CCM_CGPR (ccm_base + 0x64) -#define MXC_CCM_CCGR0 (ccm_base + 0x68) -#define MXC_CCM_CCGR1 (ccm_base + 0x6c) -#define MXC_CCM_CCGR2 (ccm_base + 0x70) -#define MXC_CCM_CCGR3 (ccm_base + 0x74) -#define MXC_CCM_CCGR4 (ccm_base + 0x78) -#define MXC_CCM_CCGR5 (ccm_base + 0x7c) -#define MXC_CCM_CCGR6 (ccm_base + 0x80) -#define MXC_CCM_CCGR7 (ccm_base + 0x84) - -/* Low-power Audio Playback Mode clock */ -static const char *lp_apm_sel[] = { "osc", }; - -/* This is used multiple times */ -static const char *standard_pll_sel[] = { "pll1_sw", "pll2_sw", "pll3_sw", "lp_apm", }; -static const char *periph_apm_sel[] = { "pll1_sw", "pll3_sw", "lp_apm", }; -static const char *main_bus_sel[] = { "pll2_sw", "periph_apm", }; -static const char *per_lp_apm_sel[] = { "main_bus", "lp_apm", }; -static const char *per_root_sel[] = { "per_podf", "ipg", }; -static const char *esdhc_c_sel[] = { "esdhc_a_podf", "esdhc_b_podf", }; -static const char *esdhc_d_sel[] = { "esdhc_a_podf", "esdhc_b_podf", }; -static const char *ssi_apm_sels[] = { "ckih1", "lp_amp", "ckih2", }; -static const char *ssi_clk_sels[] = { "pll1_sw", "pll2_sw", "pll3_sw", "ssi_apm", }; -static const char *ssi3_clk_sels[] = { "ssi1_root_gate", "ssi2_root_gate", }; -static const char *ssi_ext1_com_sels[] = { "ssi_ext1_podf", "ssi1_root_gate", }; -static const char *ssi_ext2_com_sels[] = { "ssi_ext2_podf", "ssi2_root_gate", }; -static const char *emi_slow_sel[] = { "main_bus", "ahb", }; -static const char *usb_phy_sel_str[] = { "osc", "usb_phy_podf", }; -static const char *mx51_ipu_di0_sel[] = { "di_pred", "osc", "ckih1", "tve_di", }; -static const char *mx53_ipu_di0_sel[] = { "di_pred", "osc", "ckih1", "di_pll4_podf", "dummy", "ldb_di0_gate", }; -static const char *mx53_ldb_di0_sel[] = { "pll3_sw", "pll4_sw", }; -static const char *mx51_ipu_di1_sel[] = { "di_pred", "osc", "ckih1", "tve_di", "ipp_di1", }; -static const char *mx53_ipu_di1_sel[] = { "di_pred", "osc", "ckih1", "tve_di", "ipp_di1", "ldb_di1_gate", }; -static const char *mx53_ldb_di1_sel[] = { "pll3_sw", "pll4_sw", }; -static const char *mx51_tve_ext_sel[] = { "osc", "ckih1", }; -static const char *mx53_tve_ext_sel[] = { "pll4_sw", "ckih1", }; -static const char *mx51_tve_sel[] = { "tve_pred", "tve_ext_sel", }; -static const char *ipu_sel[] = { "axi_a", "axi_b", "emi_slow_gate", "ahb", }; -static const char *gpu3d_sel[] = { "axi_a", "axi_b", "emi_slow_gate", "ahb" }; -static const char *gpu2d_sel[] = { "axi_a", "axi_b", "emi_slow_gate", "ahb" }; -static const char *vpu_sel[] = { "axi_a", "axi_b", "emi_slow_gate", "ahb", }; -static const char *mx53_can_sel[] = { "ipg", "ckih1", "ckih2", "lp_apm", }; -static const char *mx53_cko1_sel[] = { - "cpu_podf", "pll1_sw", "pll2_sw", "pll3_sw", - "emi_slow_podf", "pll4_sw", "nfc_podf", "dummy", - "di_pred", "dummy", "dummy", "ahb", - "ipg", "per_root", "ckil", "dummy",}; -static const char *mx53_cko2_sel[] = { - "dummy"/* dptc_core */, "dummy"/* dptc_perich */, - "dummy", "esdhc_a_podf", - "usboh3_podf", "dummy"/* wrck_clk_root */, - "ecspi_podf", "dummy"/* pll1_ref_clk */, - "esdhc_b_podf", "dummy"/* ddr_clk_root */, - "dummy"/* arm_axi_clk_root */, "dummy"/* usb_phy_out */, - "vpu_sel", "ipu_sel", - "osc", "ckih1", - "dummy", "esdhc_c_sel", - "ssi1_root_podf", "ssi2_root_podf", - "dummy", "dummy", - "dummy"/* lpsr_clk_root */, "dummy"/* pgc_clk_root */, - "dummy"/* tve_out */, "usb_phy_sel", - "tve_sel", "lp_apm", - "uart_root", "dummy"/* spdif0_clk_root */, - "dummy", "dummy", }; -static const char *mx51_spdif_xtal_sel[] = { "osc", "ckih", "ckih2", }; -static const char *mx53_spdif_xtal_sel[] = { "osc", "ckih", "ckih2", "pll4_sw", }; -static const char *spdif_sel[] = { "pll1_sw", "pll2_sw", "pll3_sw", "spdif_xtal_sel", }; -static const char *spdif0_com_sel[] = { "spdif0_podf", "ssi1_root_gate", }; -static const char *mx51_spdif1_com_sel[] = { "spdif1_podf", "ssi2_root_gate", }; -static const char *step_sels[] = { "lp_apm", }; -static const char *cpu_podf_sels[] = { "pll1_sw", "step_sel" }; - -static struct clk *clk[IMX5_CLK_END]; -static struct clk_onecell_data clk_data; - -static void __init mx5_clocks_common_init(void __iomem *ccm_base) -{ - imx5_pm_set_ccm_base(ccm_base); - - clk[IMX5_CLK_DUMMY] = imx_clk_fixed("dummy", 0); - clk[IMX5_CLK_CKIL] = imx_obtain_fixed_clock("ckil", 0); - clk[IMX5_CLK_OSC] = imx_obtain_fixed_clock("osc", 0); - clk[IMX5_CLK_CKIH1] = imx_obtain_fixed_clock("ckih1", 0); - clk[IMX5_CLK_CKIH2] = imx_obtain_fixed_clock("ckih2", 0); - - clk[IMX5_CLK_PERIPH_APM] = imx_clk_mux("periph_apm", MXC_CCM_CBCMR, 12, 2, - periph_apm_sel, ARRAY_SIZE(periph_apm_sel)); - clk[IMX5_CLK_MAIN_BUS] = imx_clk_mux("main_bus", MXC_CCM_CBCDR, 25, 1, - main_bus_sel, ARRAY_SIZE(main_bus_sel)); - clk[IMX5_CLK_PER_LP_APM] = imx_clk_mux("per_lp_apm", MXC_CCM_CBCMR, 1, 1, - per_lp_apm_sel, ARRAY_SIZE(per_lp_apm_sel)); - clk[IMX5_CLK_PER_PRED1] = imx_clk_divider("per_pred1", "per_lp_apm", MXC_CCM_CBCDR, 6, 2); - clk[IMX5_CLK_PER_PRED2] = imx_clk_divider("per_pred2", "per_pred1", MXC_CCM_CBCDR, 3, 3); - clk[IMX5_CLK_PER_PODF] = imx_clk_divider("per_podf", "per_pred2", MXC_CCM_CBCDR, 0, 3); - clk[IMX5_CLK_PER_ROOT] = imx_clk_mux("per_root", MXC_CCM_CBCMR, 0, 1, - per_root_sel, ARRAY_SIZE(per_root_sel)); - clk[IMX5_CLK_AHB] = imx_clk_divider("ahb", "main_bus", MXC_CCM_CBCDR, 10, 3); - clk[IMX5_CLK_AHB_MAX] = imx_clk_gate2("ahb_max", "ahb", MXC_CCM_CCGR0, 28); - clk[IMX5_CLK_AIPS_TZ1] = imx_clk_gate2("aips_tz1", "ahb", MXC_CCM_CCGR0, 24); - clk[IMX5_CLK_AIPS_TZ2] = imx_clk_gate2("aips_tz2", "ahb", MXC_CCM_CCGR0, 26); - clk[IMX5_CLK_TMAX1] = imx_clk_gate2("tmax1", "ahb", MXC_CCM_CCGR1, 0); - clk[IMX5_CLK_TMAX2] = imx_clk_gate2("tmax2", "ahb", MXC_CCM_CCGR1, 2); - clk[IMX5_CLK_TMAX3] = imx_clk_gate2("tmax3", "ahb", MXC_CCM_CCGR1, 4); - clk[IMX5_CLK_SPBA] = imx_clk_gate2("spba", "ipg", MXC_CCM_CCGR5, 0); - clk[IMX5_CLK_IPG] = imx_clk_divider("ipg", "ahb", MXC_CCM_CBCDR, 8, 2); - clk[IMX5_CLK_AXI_A] = imx_clk_divider("axi_a", "main_bus", MXC_CCM_CBCDR, 16, 3); - clk[IMX5_CLK_AXI_B] = imx_clk_divider("axi_b", "main_bus", MXC_CCM_CBCDR, 19, 3); - clk[IMX5_CLK_UART_SEL] = imx_clk_mux("uart_sel", MXC_CCM_CSCMR1, 24, 2, - standard_pll_sel, ARRAY_SIZE(standard_pll_sel)); - clk[IMX5_CLK_UART_PRED] = imx_clk_divider("uart_pred", "uart_sel", MXC_CCM_CSCDR1, 3, 3); - clk[IMX5_CLK_UART_ROOT] = imx_clk_divider("uart_root", "uart_pred", MXC_CCM_CSCDR1, 0, 3); - - clk[IMX5_CLK_ESDHC_A_SEL] = imx_clk_mux("esdhc_a_sel", MXC_CCM_CSCMR1, 20, 2, - standard_pll_sel, ARRAY_SIZE(standard_pll_sel)); - clk[IMX5_CLK_ESDHC_B_SEL] = imx_clk_mux("esdhc_b_sel", MXC_CCM_CSCMR1, 16, 2, - standard_pll_sel, ARRAY_SIZE(standard_pll_sel)); - clk[IMX5_CLK_ESDHC_A_PRED] = imx_clk_divider("esdhc_a_pred", "esdhc_a_sel", MXC_CCM_CSCDR1, 16, 3); - clk[IMX5_CLK_ESDHC_A_PODF] = imx_clk_divider("esdhc_a_podf", "esdhc_a_pred", MXC_CCM_CSCDR1, 11, 3); - clk[IMX5_CLK_ESDHC_B_PRED] = imx_clk_divider("esdhc_b_pred", "esdhc_b_sel", MXC_CCM_CSCDR1, 22, 3); - clk[IMX5_CLK_ESDHC_B_PODF] = imx_clk_divider("esdhc_b_podf", "esdhc_b_pred", MXC_CCM_CSCDR1, 19, 3); - clk[IMX5_CLK_ESDHC_C_SEL] = imx_clk_mux("esdhc_c_sel", MXC_CCM_CSCMR1, 19, 1, esdhc_c_sel, ARRAY_SIZE(esdhc_c_sel)); - clk[IMX5_CLK_ESDHC_D_SEL] = imx_clk_mux("esdhc_d_sel", MXC_CCM_CSCMR1, 18, 1, esdhc_d_sel, ARRAY_SIZE(esdhc_d_sel)); - - clk[IMX5_CLK_EMI_SEL] = imx_clk_mux("emi_sel", MXC_CCM_CBCDR, 26, 1, - emi_slow_sel, ARRAY_SIZE(emi_slow_sel)); - clk[IMX5_CLK_EMI_SLOW_PODF] = imx_clk_divider("emi_slow_podf", "emi_sel", MXC_CCM_CBCDR, 22, 3); - clk[IMX5_CLK_NFC_PODF] = imx_clk_divider("nfc_podf", "emi_slow_podf", MXC_CCM_CBCDR, 13, 3); - clk[IMX5_CLK_ECSPI_SEL] = imx_clk_mux("ecspi_sel", MXC_CCM_CSCMR1, 4, 2, - standard_pll_sel, ARRAY_SIZE(standard_pll_sel)); - clk[IMX5_CLK_ECSPI_PRED] = imx_clk_divider("ecspi_pred", "ecspi_sel", MXC_CCM_CSCDR2, 25, 3); - clk[IMX5_CLK_ECSPI_PODF] = imx_clk_divider("ecspi_podf", "ecspi_pred", MXC_CCM_CSCDR2, 19, 6); - clk[IMX5_CLK_USBOH3_SEL] = imx_clk_mux("usboh3_sel", MXC_CCM_CSCMR1, 22, 2, - standard_pll_sel, ARRAY_SIZE(standard_pll_sel)); - clk[IMX5_CLK_USBOH3_PRED] = imx_clk_divider("usboh3_pred", "usboh3_sel", MXC_CCM_CSCDR1, 8, 3); - clk[IMX5_CLK_USBOH3_PODF] = imx_clk_divider("usboh3_podf", "usboh3_pred", MXC_CCM_CSCDR1, 6, 2); - clk[IMX5_CLK_USB_PHY_PRED] = imx_clk_divider("usb_phy_pred", "pll3_sw", MXC_CCM_CDCDR, 3, 3); - clk[IMX5_CLK_USB_PHY_PODF] = imx_clk_divider("usb_phy_podf", "usb_phy_pred", MXC_CCM_CDCDR, 0, 3); - clk[IMX5_CLK_USB_PHY_SEL] = imx_clk_mux("usb_phy_sel", MXC_CCM_CSCMR1, 26, 1, - usb_phy_sel_str, ARRAY_SIZE(usb_phy_sel_str)); - clk[IMX5_CLK_STEP_SEL] = imx_clk_mux("step_sel", MXC_CCM_CCSR, 7, 2, step_sels, ARRAY_SIZE(step_sels)); - clk[IMX5_CLK_CPU_PODF_SEL] = imx_clk_mux("cpu_podf_sel", MXC_CCM_CCSR, 2, 1, cpu_podf_sels, ARRAY_SIZE(cpu_podf_sels)); - clk[IMX5_CLK_CPU_PODF] = imx_clk_divider("cpu_podf", "cpu_podf_sel", MXC_CCM_CACRR, 0, 3); - clk[IMX5_CLK_DI_PRED] = imx_clk_divider("di_pred", "pll3_sw", MXC_CCM_CDCDR, 6, 3); - clk[IMX5_CLK_IIM_GATE] = imx_clk_gate2("iim_gate", "ipg", MXC_CCM_CCGR0, 30); - clk[IMX5_CLK_UART1_IPG_GATE] = imx_clk_gate2("uart1_ipg_gate", "ipg", MXC_CCM_CCGR1, 6); - clk[IMX5_CLK_UART1_PER_GATE] = imx_clk_gate2("uart1_per_gate", "uart_root", MXC_CCM_CCGR1, 8); - clk[IMX5_CLK_UART2_IPG_GATE] = imx_clk_gate2("uart2_ipg_gate", "ipg", MXC_CCM_CCGR1, 10); - clk[IMX5_CLK_UART2_PER_GATE] = imx_clk_gate2("uart2_per_gate", "uart_root", MXC_CCM_CCGR1, 12); - clk[IMX5_CLK_UART3_IPG_GATE] = imx_clk_gate2("uart3_ipg_gate", "ipg", MXC_CCM_CCGR1, 14); - clk[IMX5_CLK_UART3_PER_GATE] = imx_clk_gate2("uart3_per_gate", "uart_root", MXC_CCM_CCGR1, 16); - clk[IMX5_CLK_I2C1_GATE] = imx_clk_gate2("i2c1_gate", "per_root", MXC_CCM_CCGR1, 18); - clk[IMX5_CLK_I2C2_GATE] = imx_clk_gate2("i2c2_gate", "per_root", MXC_CCM_CCGR1, 20); - clk[IMX5_CLK_PWM1_IPG_GATE] = imx_clk_gate2("pwm1_ipg_gate", "ipg", MXC_CCM_CCGR2, 10); - clk[IMX5_CLK_PWM1_HF_GATE] = imx_clk_gate2("pwm1_hf_gate", "per_root", MXC_CCM_CCGR2, 12); - clk[IMX5_CLK_PWM2_IPG_GATE] = imx_clk_gate2("pwm2_ipg_gate", "ipg", MXC_CCM_CCGR2, 14); - clk[IMX5_CLK_PWM2_HF_GATE] = imx_clk_gate2("pwm2_hf_gate", "per_root", MXC_CCM_CCGR2, 16); - clk[IMX5_CLK_GPT_IPG_GATE] = imx_clk_gate2("gpt_ipg_gate", "ipg", MXC_CCM_CCGR2, 18); - clk[IMX5_CLK_GPT_HF_GATE] = imx_clk_gate2("gpt_hf_gate", "per_root", MXC_CCM_CCGR2, 20); - clk[IMX5_CLK_FEC_GATE] = imx_clk_gate2("fec_gate", "ipg", MXC_CCM_CCGR2, 24); - clk[IMX5_CLK_USBOH3_GATE] = imx_clk_gate2("usboh3_gate", "ipg", MXC_CCM_CCGR2, 26); - clk[IMX5_CLK_USBOH3_PER_GATE] = imx_clk_gate2("usboh3_per_gate", "usboh3_podf", MXC_CCM_CCGR2, 28); - clk[IMX5_CLK_ESDHC1_IPG_GATE] = imx_clk_gate2("esdhc1_ipg_gate", "ipg", MXC_CCM_CCGR3, 0); - clk[IMX5_CLK_ESDHC2_IPG_GATE] = imx_clk_gate2("esdhc2_ipg_gate", "ipg", MXC_CCM_CCGR3, 4); - clk[IMX5_CLK_ESDHC3_IPG_GATE] = imx_clk_gate2("esdhc3_ipg_gate", "ipg", MXC_CCM_CCGR3, 8); - clk[IMX5_CLK_ESDHC4_IPG_GATE] = imx_clk_gate2("esdhc4_ipg_gate", "ipg", MXC_CCM_CCGR3, 12); - clk[IMX5_CLK_SSI1_IPG_GATE] = imx_clk_gate2("ssi1_ipg_gate", "ipg", MXC_CCM_CCGR3, 16); - clk[IMX5_CLK_SSI2_IPG_GATE] = imx_clk_gate2("ssi2_ipg_gate", "ipg", MXC_CCM_CCGR3, 20); - clk[IMX5_CLK_SSI3_IPG_GATE] = imx_clk_gate2("ssi3_ipg_gate", "ipg", MXC_CCM_CCGR3, 24); - clk[IMX5_CLK_ECSPI1_IPG_GATE] = imx_clk_gate2("ecspi1_ipg_gate", "ipg", MXC_CCM_CCGR4, 18); - clk[IMX5_CLK_ECSPI1_PER_GATE] = imx_clk_gate2("ecspi1_per_gate", "ecspi_podf", MXC_CCM_CCGR4, 20); - clk[IMX5_CLK_ECSPI2_IPG_GATE] = imx_clk_gate2("ecspi2_ipg_gate", "ipg", MXC_CCM_CCGR4, 22); - clk[IMX5_CLK_ECSPI2_PER_GATE] = imx_clk_gate2("ecspi2_per_gate", "ecspi_podf", MXC_CCM_CCGR4, 24); - clk[IMX5_CLK_CSPI_IPG_GATE] = imx_clk_gate2("cspi_ipg_gate", "ipg", MXC_CCM_CCGR4, 26); - clk[IMX5_CLK_SDMA_GATE] = imx_clk_gate2("sdma_gate", "ipg", MXC_CCM_CCGR4, 30); - clk[IMX5_CLK_EMI_FAST_GATE] = imx_clk_gate2("emi_fast_gate", "dummy", MXC_CCM_CCGR5, 14); - clk[IMX5_CLK_EMI_SLOW_GATE] = imx_clk_gate2("emi_slow_gate", "emi_slow_podf", MXC_CCM_CCGR5, 16); - clk[IMX5_CLK_IPU_SEL] = imx_clk_mux("ipu_sel", MXC_CCM_CBCMR, 6, 2, ipu_sel, ARRAY_SIZE(ipu_sel)); - clk[IMX5_CLK_IPU_GATE] = imx_clk_gate2("ipu_gate", "ipu_sel", MXC_CCM_CCGR5, 10); - clk[IMX5_CLK_NFC_GATE] = imx_clk_gate2("nfc_gate", "nfc_podf", MXC_CCM_CCGR5, 20); - clk[IMX5_CLK_IPU_DI0_GATE] = imx_clk_gate2("ipu_di0_gate", "ipu_di0_sel", MXC_CCM_CCGR6, 10); - clk[IMX5_CLK_IPU_DI1_GATE] = imx_clk_gate2("ipu_di1_gate", "ipu_di1_sel", MXC_CCM_CCGR6, 12); - clk[IMX5_CLK_GPU3D_SEL] = imx_clk_mux("gpu3d_sel", MXC_CCM_CBCMR, 4, 2, gpu3d_sel, ARRAY_SIZE(gpu3d_sel)); - clk[IMX5_CLK_GPU2D_SEL] = imx_clk_mux("gpu2d_sel", MXC_CCM_CBCMR, 16, 2, gpu2d_sel, ARRAY_SIZE(gpu2d_sel)); - clk[IMX5_CLK_GPU3D_GATE] = imx_clk_gate2("gpu3d_gate", "gpu3d_sel", MXC_CCM_CCGR5, 2); - clk[IMX5_CLK_GARB_GATE] = imx_clk_gate2("garb_gate", "axi_a", MXC_CCM_CCGR5, 4); - clk[IMX5_CLK_GPU2D_GATE] = imx_clk_gate2("gpu2d_gate", "gpu2d_sel", MXC_CCM_CCGR6, 14); - clk[IMX5_CLK_VPU_SEL] = imx_clk_mux("vpu_sel", MXC_CCM_CBCMR, 14, 2, vpu_sel, ARRAY_SIZE(vpu_sel)); - clk[IMX5_CLK_VPU_GATE] = imx_clk_gate2("vpu_gate", "vpu_sel", MXC_CCM_CCGR5, 6); - clk[IMX5_CLK_VPU_REFERENCE_GATE] = imx_clk_gate2("vpu_reference_gate", "osc", MXC_CCM_CCGR5, 8); - clk[IMX5_CLK_UART4_IPG_GATE] = imx_clk_gate2("uart4_ipg_gate", "ipg", MXC_CCM_CCGR7, 8); - clk[IMX5_CLK_UART4_PER_GATE] = imx_clk_gate2("uart4_per_gate", "uart_root", MXC_CCM_CCGR7, 10); - clk[IMX5_CLK_UART5_IPG_GATE] = imx_clk_gate2("uart5_ipg_gate", "ipg", MXC_CCM_CCGR7, 12); - clk[IMX5_CLK_UART5_PER_GATE] = imx_clk_gate2("uart5_per_gate", "uart_root", MXC_CCM_CCGR7, 14); - clk[IMX5_CLK_GPC_DVFS] = imx_clk_gate2("gpc_dvfs", "dummy", MXC_CCM_CCGR5, 24); - - clk[IMX5_CLK_SSI_APM] = imx_clk_mux("ssi_apm", MXC_CCM_CSCMR1, 8, 2, ssi_apm_sels, ARRAY_SIZE(ssi_apm_sels)); - clk[IMX5_CLK_SSI1_ROOT_SEL] = imx_clk_mux("ssi1_root_sel", MXC_CCM_CSCMR1, 14, 2, ssi_clk_sels, ARRAY_SIZE(ssi_clk_sels)); - clk[IMX5_CLK_SSI2_ROOT_SEL] = imx_clk_mux("ssi2_root_sel", MXC_CCM_CSCMR1, 12, 2, ssi_clk_sels, ARRAY_SIZE(ssi_clk_sels)); - clk[IMX5_CLK_SSI3_ROOT_SEL] = imx_clk_mux("ssi3_root_sel", MXC_CCM_CSCMR1, 11, 1, ssi3_clk_sels, ARRAY_SIZE(ssi3_clk_sels)); - clk[IMX5_CLK_SSI_EXT1_SEL] = imx_clk_mux("ssi_ext1_sel", MXC_CCM_CSCMR1, 28, 2, ssi_clk_sels, ARRAY_SIZE(ssi_clk_sels)); - clk[IMX5_CLK_SSI_EXT2_SEL] = imx_clk_mux("ssi_ext2_sel", MXC_CCM_CSCMR1, 30, 2, ssi_clk_sels, ARRAY_SIZE(ssi_clk_sels)); - clk[IMX5_CLK_SSI_EXT1_COM_SEL] = imx_clk_mux("ssi_ext1_com_sel", MXC_CCM_CSCMR1, 0, 1, ssi_ext1_com_sels, ARRAY_SIZE(ssi_ext1_com_sels)); - clk[IMX5_CLK_SSI_EXT2_COM_SEL] = imx_clk_mux("ssi_ext2_com_sel", MXC_CCM_CSCMR1, 1, 1, ssi_ext2_com_sels, ARRAY_SIZE(ssi_ext2_com_sels)); - clk[IMX5_CLK_SSI1_ROOT_PRED] = imx_clk_divider("ssi1_root_pred", "ssi1_root_sel", MXC_CCM_CS1CDR, 6, 3); - clk[IMX5_CLK_SSI1_ROOT_PODF] = imx_clk_divider("ssi1_root_podf", "ssi1_root_pred", MXC_CCM_CS1CDR, 0, 6); - clk[IMX5_CLK_SSI2_ROOT_PRED] = imx_clk_divider("ssi2_root_pred", "ssi2_root_sel", MXC_CCM_CS2CDR, 6, 3); - clk[IMX5_CLK_SSI2_ROOT_PODF] = imx_clk_divider("ssi2_root_podf", "ssi2_root_pred", MXC_CCM_CS2CDR, 0, 6); - clk[IMX5_CLK_SSI_EXT1_PRED] = imx_clk_divider("ssi_ext1_pred", "ssi_ext1_sel", MXC_CCM_CS1CDR, 22, 3); - clk[IMX5_CLK_SSI_EXT1_PODF] = imx_clk_divider("ssi_ext1_podf", "ssi_ext1_pred", MXC_CCM_CS1CDR, 16, 6); - clk[IMX5_CLK_SSI_EXT2_PRED] = imx_clk_divider("ssi_ext2_pred", "ssi_ext2_sel", MXC_CCM_CS2CDR, 22, 3); - clk[IMX5_CLK_SSI_EXT2_PODF] = imx_clk_divider("ssi_ext2_podf", "ssi_ext2_pred", MXC_CCM_CS2CDR, 16, 6); - clk[IMX5_CLK_SSI1_ROOT_GATE] = imx_clk_gate2("ssi1_root_gate", "ssi1_root_podf", MXC_CCM_CCGR3, 18); - clk[IMX5_CLK_SSI2_ROOT_GATE] = imx_clk_gate2("ssi2_root_gate", "ssi2_root_podf", MXC_CCM_CCGR3, 22); - clk[IMX5_CLK_SSI3_ROOT_GATE] = imx_clk_gate2("ssi3_root_gate", "ssi3_root_sel", MXC_CCM_CCGR3, 26); - clk[IMX5_CLK_SSI_EXT1_GATE] = imx_clk_gate2("ssi_ext1_gate", "ssi_ext1_com_sel", MXC_CCM_CCGR3, 28); - clk[IMX5_CLK_SSI_EXT2_GATE] = imx_clk_gate2("ssi_ext2_gate", "ssi_ext2_com_sel", MXC_CCM_CCGR3, 30); - clk[IMX5_CLK_EPIT1_IPG_GATE] = imx_clk_gate2("epit1_ipg_gate", "ipg", MXC_CCM_CCGR2, 2); - clk[IMX5_CLK_EPIT1_HF_GATE] = imx_clk_gate2("epit1_hf_gate", "per_root", MXC_CCM_CCGR2, 4); - clk[IMX5_CLK_EPIT2_IPG_GATE] = imx_clk_gate2("epit2_ipg_gate", "ipg", MXC_CCM_CCGR2, 6); - clk[IMX5_CLK_EPIT2_HF_GATE] = imx_clk_gate2("epit2_hf_gate", "per_root", MXC_CCM_CCGR2, 8); - clk[IMX5_CLK_OWIRE_GATE] = imx_clk_gate2("owire_gate", "per_root", MXC_CCM_CCGR2, 22); - clk[IMX5_CLK_SRTC_GATE] = imx_clk_gate2("srtc_gate", "per_root", MXC_CCM_CCGR4, 28); - clk[IMX5_CLK_PATA_GATE] = imx_clk_gate2("pata_gate", "ipg", MXC_CCM_CCGR4, 0); - clk[IMX5_CLK_SPDIF0_SEL] = imx_clk_mux("spdif0_sel", MXC_CCM_CSCMR2, 0, 2, spdif_sel, ARRAY_SIZE(spdif_sel)); - clk[IMX5_CLK_SPDIF0_PRED] = imx_clk_divider("spdif0_pred", "spdif0_sel", MXC_CCM_CDCDR, 25, 3); - clk[IMX5_CLK_SPDIF0_PODF] = imx_clk_divider("spdif0_podf", "spdif0_pred", MXC_CCM_CDCDR, 19, 6); - clk[IMX5_CLK_SPDIF0_COM_SEL] = imx_clk_mux_flags("spdif0_com_sel", MXC_CCM_CSCMR2, 4, 1, - spdif0_com_sel, ARRAY_SIZE(spdif0_com_sel), CLK_SET_RATE_PARENT); - clk[IMX5_CLK_SPDIF0_GATE] = imx_clk_gate2("spdif0_gate", "spdif0_com_sel", MXC_CCM_CCGR5, 26); - clk[IMX5_CLK_SPDIF_IPG_GATE] = imx_clk_gate2("spdif_ipg_gate", "ipg", MXC_CCM_CCGR5, 30); - clk[IMX5_CLK_SAHARA_IPG_GATE] = imx_clk_gate2("sahara_ipg_gate", "ipg", MXC_CCM_CCGR4, 14); - clk[IMX5_CLK_SATA_REF] = imx_clk_fixed_factor("sata_ref", "usb_phy1_gate", 1, 1); - - clk_register_clkdev(clk[IMX5_CLK_CPU_PODF], NULL, "cpu0"); - clk_register_clkdev(clk[IMX5_CLK_GPC_DVFS], "gpc_dvfs", NULL); - - /* Set SDHC parents to be PLL2 */ - clk_set_parent(clk[IMX5_CLK_ESDHC_A_SEL], clk[IMX5_CLK_PLL2_SW]); - clk_set_parent(clk[IMX5_CLK_ESDHC_B_SEL], clk[IMX5_CLK_PLL2_SW]); - - /* move usb phy clk to 24MHz */ - clk_set_parent(clk[IMX5_CLK_USB_PHY_SEL], clk[IMX5_CLK_OSC]); - - clk_prepare_enable(clk[IMX5_CLK_GPC_DVFS]); - clk_prepare_enable(clk[IMX5_CLK_AHB_MAX]); /* esdhc3 */ - clk_prepare_enable(clk[IMX5_CLK_AIPS_TZ1]); - clk_prepare_enable(clk[IMX5_CLK_AIPS_TZ2]); /* fec */ - clk_prepare_enable(clk[IMX5_CLK_SPBA]); - clk_prepare_enable(clk[IMX5_CLK_EMI_FAST_GATE]); /* fec */ - clk_prepare_enable(clk[IMX5_CLK_EMI_SLOW_GATE]); /* eim */ - clk_prepare_enable(clk[IMX5_CLK_MIPI_HSC1_GATE]); - clk_prepare_enable(clk[IMX5_CLK_MIPI_HSC2_GATE]); - clk_prepare_enable(clk[IMX5_CLK_MIPI_ESC_GATE]); - clk_prepare_enable(clk[IMX5_CLK_MIPI_HSP_GATE]); - clk_prepare_enable(clk[IMX5_CLK_TMAX1]); - clk_prepare_enable(clk[IMX5_CLK_TMAX2]); /* esdhc2, fec */ - clk_prepare_enable(clk[IMX5_CLK_TMAX3]); /* esdhc1, esdhc4 */ -} - -static void __init mx50_clocks_init(struct device_node *np) -{ - void __iomem *ccm_base; - void __iomem *pll_base; - unsigned long r; - - pll_base = ioremap(MX53_DPLL1_BASE, SZ_16K); - WARN_ON(!pll_base); - clk[IMX5_CLK_PLL1_SW] = imx_clk_pllv2("pll1_sw", "osc", pll_base); - - pll_base = ioremap(MX53_DPLL2_BASE, SZ_16K); - WARN_ON(!pll_base); - clk[IMX5_CLK_PLL2_SW] = imx_clk_pllv2("pll2_sw", "osc", pll_base); - - pll_base = ioremap(MX53_DPLL3_BASE, SZ_16K); - WARN_ON(!pll_base); - clk[IMX5_CLK_PLL3_SW] = imx_clk_pllv2("pll3_sw", "osc", pll_base); - - ccm_base = of_iomap(np, 0); - WARN_ON(!ccm_base); - - mx5_clocks_common_init(ccm_base); - - clk[IMX5_CLK_LP_APM] = imx_clk_mux("lp_apm", MXC_CCM_CCSR, 10, 1, - lp_apm_sel, ARRAY_SIZE(lp_apm_sel)); - clk[IMX5_CLK_ESDHC1_PER_GATE] = imx_clk_gate2("esdhc1_per_gate", "esdhc_a_podf", MXC_CCM_CCGR3, 2); - clk[IMX5_CLK_ESDHC2_PER_GATE] = imx_clk_gate2("esdhc2_per_gate", "esdhc_c_sel", MXC_CCM_CCGR3, 6); - clk[IMX5_CLK_ESDHC3_PER_GATE] = imx_clk_gate2("esdhc3_per_gate", "esdhc_b_podf", MXC_CCM_CCGR3, 10); - clk[IMX5_CLK_ESDHC4_PER_GATE] = imx_clk_gate2("esdhc4_per_gate", "esdhc_d_sel", MXC_CCM_CCGR3, 14); - clk[IMX5_CLK_USB_PHY1_GATE] = imx_clk_gate2("usb_phy1_gate", "usb_phy_sel", MXC_CCM_CCGR4, 10); - clk[IMX5_CLK_USB_PHY2_GATE] = imx_clk_gate2("usb_phy2_gate", "usb_phy_sel", MXC_CCM_CCGR4, 12); - clk[IMX5_CLK_I2C3_GATE] = imx_clk_gate2("i2c3_gate", "per_root", MXC_CCM_CCGR1, 22); - - clk[IMX5_CLK_CKO1_SEL] = imx_clk_mux("cko1_sel", MXC_CCM_CCOSR, 0, 4, - mx53_cko1_sel, ARRAY_SIZE(mx53_cko1_sel)); - clk[IMX5_CLK_CKO1_PODF] = imx_clk_divider("cko1_podf", "cko1_sel", MXC_CCM_CCOSR, 4, 3); - clk[IMX5_CLK_CKO1] = imx_clk_gate2("cko1", "cko1_podf", MXC_CCM_CCOSR, 7); - - clk[IMX5_CLK_CKO2_SEL] = imx_clk_mux("cko2_sel", MXC_CCM_CCOSR, 16, 5, - mx53_cko2_sel, ARRAY_SIZE(mx53_cko2_sel)); - clk[IMX5_CLK_CKO2_PODF] = imx_clk_divider("cko2_podf", "cko2_sel", MXC_CCM_CCOSR, 21, 3); - clk[IMX5_CLK_CKO2] = imx_clk_gate2("cko2", "cko2_podf", MXC_CCM_CCOSR, 24); - - imx_check_clocks(clk, ARRAY_SIZE(clk)); - - clk_data.clks = clk; - clk_data.clk_num = ARRAY_SIZE(clk); - of_clk_add_provider(np, of_clk_src_onecell_get, &clk_data); - - /* set SDHC root clock to 200MHZ*/ - clk_set_rate(clk[IMX5_CLK_ESDHC_A_PODF], 200000000); - clk_set_rate(clk[IMX5_CLK_ESDHC_B_PODF], 200000000); - - clk_prepare_enable(clk[IMX5_CLK_IIM_GATE]); - imx_print_silicon_rev("i.MX50", IMX_CHIP_REVISION_1_1); - clk_disable_unprepare(clk[IMX5_CLK_IIM_GATE]); - - r = clk_round_rate(clk[IMX5_CLK_USBOH3_PER_GATE], 54000000); - clk_set_rate(clk[IMX5_CLK_USBOH3_PER_GATE], r); -} -CLK_OF_DECLARE(imx50_ccm, "fsl,imx50-ccm", mx50_clocks_init); - -static void __init mx51_clocks_init(struct device_node *np) -{ - void __iomem *ccm_base; - void __iomem *pll_base; - u32 val; - - pll_base = ioremap(MX51_DPLL1_BASE, SZ_16K); - WARN_ON(!pll_base); - clk[IMX5_CLK_PLL1_SW] = imx_clk_pllv2("pll1_sw", "osc", pll_base); - - pll_base = ioremap(MX51_DPLL2_BASE, SZ_16K); - WARN_ON(!pll_base); - clk[IMX5_CLK_PLL2_SW] = imx_clk_pllv2("pll2_sw", "osc", pll_base); - - pll_base = ioremap(MX51_DPLL3_BASE, SZ_16K); - WARN_ON(!pll_base); - clk[IMX5_CLK_PLL3_SW] = imx_clk_pllv2("pll3_sw", "osc", pll_base); - - ccm_base = of_iomap(np, 0); - WARN_ON(!ccm_base); - - mx5_clocks_common_init(ccm_base); - - clk[IMX5_CLK_LP_APM] = imx_clk_mux("lp_apm", MXC_CCM_CCSR, 9, 1, - lp_apm_sel, ARRAY_SIZE(lp_apm_sel)); - clk[IMX5_CLK_IPU_DI0_SEL] = imx_clk_mux("ipu_di0_sel", MXC_CCM_CSCMR2, 26, 3, - mx51_ipu_di0_sel, ARRAY_SIZE(mx51_ipu_di0_sel)); - clk[IMX5_CLK_IPU_DI1_SEL] = imx_clk_mux("ipu_di1_sel", MXC_CCM_CSCMR2, 29, 3, - mx51_ipu_di1_sel, ARRAY_SIZE(mx51_ipu_di1_sel)); - clk[IMX5_CLK_TVE_EXT_SEL] = imx_clk_mux_flags("tve_ext_sel", MXC_CCM_CSCMR1, 6, 1, - mx51_tve_ext_sel, ARRAY_SIZE(mx51_tve_ext_sel), CLK_SET_RATE_PARENT); - clk[IMX5_CLK_TVE_SEL] = imx_clk_mux("tve_sel", MXC_CCM_CSCMR1, 7, 1, - mx51_tve_sel, ARRAY_SIZE(mx51_tve_sel)); - clk[IMX5_CLK_TVE_GATE] = imx_clk_gate2("tve_gate", "tve_sel", MXC_CCM_CCGR2, 30); - clk[IMX5_CLK_TVE_PRED] = imx_clk_divider("tve_pred", "pll3_sw", MXC_CCM_CDCDR, 28, 3); - clk[IMX5_CLK_ESDHC1_PER_GATE] = imx_clk_gate2("esdhc1_per_gate", "esdhc_a_podf", MXC_CCM_CCGR3, 2); - clk[IMX5_CLK_ESDHC2_PER_GATE] = imx_clk_gate2("esdhc2_per_gate", "esdhc_b_podf", MXC_CCM_CCGR3, 6); - clk[IMX5_CLK_ESDHC3_PER_GATE] = imx_clk_gate2("esdhc3_per_gate", "esdhc_c_sel", MXC_CCM_CCGR3, 10); - clk[IMX5_CLK_ESDHC4_PER_GATE] = imx_clk_gate2("esdhc4_per_gate", "esdhc_d_sel", MXC_CCM_CCGR3, 14); - clk[IMX5_CLK_USB_PHY_GATE] = imx_clk_gate2("usb_phy_gate", "usb_phy_sel", MXC_CCM_CCGR2, 0); - clk[IMX5_CLK_HSI2C_GATE] = imx_clk_gate2("hsi2c_gate", "ipg", MXC_CCM_CCGR1, 22); - clk[IMX5_CLK_MIPI_HSC1_GATE] = imx_clk_gate2("mipi_hsc1_gate", "ipg", MXC_CCM_CCGR4, 6); - clk[IMX5_CLK_MIPI_HSC2_GATE] = imx_clk_gate2("mipi_hsc2_gate", "ipg", MXC_CCM_CCGR4, 8); - clk[IMX5_CLK_MIPI_ESC_GATE] = imx_clk_gate2("mipi_esc_gate", "ipg", MXC_CCM_CCGR4, 10); - clk[IMX5_CLK_MIPI_HSP_GATE] = imx_clk_gate2("mipi_hsp_gate", "ipg", MXC_CCM_CCGR4, 12); - clk[IMX5_CLK_SPDIF_XTAL_SEL] = imx_clk_mux("spdif_xtal_sel", MXC_CCM_CSCMR1, 2, 2, - mx51_spdif_xtal_sel, ARRAY_SIZE(mx51_spdif_xtal_sel)); - clk[IMX5_CLK_SPDIF1_SEL] = imx_clk_mux("spdif1_sel", MXC_CCM_CSCMR2, 2, 2, - spdif_sel, ARRAY_SIZE(spdif_sel)); - clk[IMX5_CLK_SPDIF1_PRED] = imx_clk_divider("spdif1_pred", "spdif1_sel", MXC_CCM_CDCDR, 16, 3); - clk[IMX5_CLK_SPDIF1_PODF] = imx_clk_divider("spdif1_podf", "spdif1_pred", MXC_CCM_CDCDR, 9, 6); - clk[IMX5_CLK_SPDIF1_COM_SEL] = imx_clk_mux("spdif1_com_sel", MXC_CCM_CSCMR2, 5, 1, - mx51_spdif1_com_sel, ARRAY_SIZE(mx51_spdif1_com_sel)); - clk[IMX5_CLK_SPDIF1_GATE] = imx_clk_gate2("spdif1_gate", "spdif1_com_sel", MXC_CCM_CCGR5, 28); - - imx_check_clocks(clk, ARRAY_SIZE(clk)); - - clk_data.clks = clk; - clk_data.clk_num = ARRAY_SIZE(clk); - of_clk_add_provider(np, of_clk_src_onecell_get, &clk_data); - - /* set the usboh3 parent to pll2_sw */ - clk_set_parent(clk[IMX5_CLK_USBOH3_SEL], clk[IMX5_CLK_PLL2_SW]); - - /* set SDHC root clock to 166.25MHZ*/ - clk_set_rate(clk[IMX5_CLK_ESDHC_A_PODF], 166250000); - clk_set_rate(clk[IMX5_CLK_ESDHC_B_PODF], 166250000); - - clk_prepare_enable(clk[IMX5_CLK_IIM_GATE]); - imx_print_silicon_rev("i.MX51", mx51_revision()); - clk_disable_unprepare(clk[IMX5_CLK_IIM_GATE]); - - /* - * Reference Manual says: Functionality of CCDR[18] and CLPCR[23] is no - * longer supported. Set to one for better power saving. - * - * The effect of not setting these bits is that MIPI clocks can't be - * enabled without the IPU clock being enabled aswell. - */ - val = readl(MXC_CCM_CCDR); - val |= 1 << 18; - writel(val, MXC_CCM_CCDR); - - val = readl(MXC_CCM_CLPCR); - val |= 1 << 23; - writel(val, MXC_CCM_CLPCR); -} -CLK_OF_DECLARE(imx51_ccm, "fsl,imx51-ccm", mx51_clocks_init); - -static void __init mx53_clocks_init(struct device_node *np) -{ - void __iomem *ccm_base; - void __iomem *pll_base; - unsigned long r; - - pll_base = ioremap(MX53_DPLL1_BASE, SZ_16K); - WARN_ON(!pll_base); - clk[IMX5_CLK_PLL1_SW] = imx_clk_pllv2("pll1_sw", "osc", pll_base); - - pll_base = ioremap(MX53_DPLL2_BASE, SZ_16K); - WARN_ON(!pll_base); - clk[IMX5_CLK_PLL2_SW] = imx_clk_pllv2("pll2_sw", "osc", pll_base); - - pll_base = ioremap(MX53_DPLL3_BASE, SZ_16K); - WARN_ON(!pll_base); - clk[IMX5_CLK_PLL3_SW] = imx_clk_pllv2("pll3_sw", "osc", pll_base); - - pll_base = ioremap(MX53_DPLL4_BASE, SZ_16K); - WARN_ON(!pll_base); - clk[IMX5_CLK_PLL4_SW] = imx_clk_pllv2("pll4_sw", "osc", pll_base); - - ccm_base = of_iomap(np, 0); - WARN_ON(!ccm_base); - - mx5_clocks_common_init(ccm_base); - - clk[IMX5_CLK_LP_APM] = imx_clk_mux("lp_apm", MXC_CCM_CCSR, 10, 1, - lp_apm_sel, ARRAY_SIZE(lp_apm_sel)); - clk[IMX5_CLK_LDB_DI1_DIV_3_5] = imx_clk_fixed_factor("ldb_di1_div_3_5", "ldb_di1_sel", 2, 7); - clk[IMX5_CLK_LDB_DI1_DIV] = imx_clk_divider_flags("ldb_di1_div", "ldb_di1_div_3_5", MXC_CCM_CSCMR2, 11, 1, 0); - clk[IMX5_CLK_LDB_DI1_SEL] = imx_clk_mux_flags("ldb_di1_sel", MXC_CCM_CSCMR2, 9, 1, - mx53_ldb_di1_sel, ARRAY_SIZE(mx53_ldb_di1_sel), CLK_SET_RATE_PARENT); - clk[IMX5_CLK_DI_PLL4_PODF] = imx_clk_divider("di_pll4_podf", "pll4_sw", MXC_CCM_CDCDR, 16, 3); - clk[IMX5_CLK_LDB_DI0_DIV_3_5] = imx_clk_fixed_factor("ldb_di0_div_3_5", "ldb_di0_sel", 2, 7); - clk[IMX5_CLK_LDB_DI0_DIV] = imx_clk_divider_flags("ldb_di0_div", "ldb_di0_div_3_5", MXC_CCM_CSCMR2, 10, 1, 0); - clk[IMX5_CLK_LDB_DI0_SEL] = imx_clk_mux_flags("ldb_di0_sel", MXC_CCM_CSCMR2, 8, 1, - mx53_ldb_di0_sel, ARRAY_SIZE(mx53_ldb_di0_sel), CLK_SET_RATE_PARENT); - clk[IMX5_CLK_LDB_DI0_GATE] = imx_clk_gate2("ldb_di0_gate", "ldb_di0_div", MXC_CCM_CCGR6, 28); - clk[IMX5_CLK_LDB_DI1_GATE] = imx_clk_gate2("ldb_di1_gate", "ldb_di1_div", MXC_CCM_CCGR6, 30); - clk[IMX5_CLK_IPU_DI0_SEL] = imx_clk_mux("ipu_di0_sel", MXC_CCM_CSCMR2, 26, 3, - mx53_ipu_di0_sel, ARRAY_SIZE(mx53_ipu_di0_sel)); - clk[IMX5_CLK_IPU_DI1_SEL] = imx_clk_mux("ipu_di1_sel", MXC_CCM_CSCMR2, 29, 3, - mx53_ipu_di1_sel, ARRAY_SIZE(mx53_ipu_di1_sel)); - clk[IMX5_CLK_TVE_EXT_SEL] = imx_clk_mux_flags("tve_ext_sel", MXC_CCM_CSCMR1, 6, 1, - mx53_tve_ext_sel, ARRAY_SIZE(mx53_tve_ext_sel), CLK_SET_RATE_PARENT); - clk[IMX5_CLK_TVE_GATE] = imx_clk_gate2("tve_gate", "tve_pred", MXC_CCM_CCGR2, 30); - clk[IMX5_CLK_TVE_PRED] = imx_clk_divider("tve_pred", "tve_ext_sel", MXC_CCM_CDCDR, 28, 3); - clk[IMX5_CLK_ESDHC1_PER_GATE] = imx_clk_gate2("esdhc1_per_gate", "esdhc_a_podf", MXC_CCM_CCGR3, 2); - clk[IMX5_CLK_ESDHC2_PER_GATE] = imx_clk_gate2("esdhc2_per_gate", "esdhc_c_sel", MXC_CCM_CCGR3, 6); - clk[IMX5_CLK_ESDHC3_PER_GATE] = imx_clk_gate2("esdhc3_per_gate", "esdhc_b_podf", MXC_CCM_CCGR3, 10); - clk[IMX5_CLK_ESDHC4_PER_GATE] = imx_clk_gate2("esdhc4_per_gate", "esdhc_d_sel", MXC_CCM_CCGR3, 14); - clk[IMX5_CLK_USB_PHY1_GATE] = imx_clk_gate2("usb_phy1_gate", "usb_phy_sel", MXC_CCM_CCGR4, 10); - clk[IMX5_CLK_USB_PHY2_GATE] = imx_clk_gate2("usb_phy2_gate", "usb_phy_sel", MXC_CCM_CCGR4, 12); - clk[IMX5_CLK_CAN_SEL] = imx_clk_mux("can_sel", MXC_CCM_CSCMR2, 6, 2, - mx53_can_sel, ARRAY_SIZE(mx53_can_sel)); - clk[IMX5_CLK_CAN1_SERIAL_GATE] = imx_clk_gate2("can1_serial_gate", "can_sel", MXC_CCM_CCGR6, 22); - clk[IMX5_CLK_CAN1_IPG_GATE] = imx_clk_gate2("can1_ipg_gate", "ipg", MXC_CCM_CCGR6, 20); - clk[IMX5_CLK_OCRAM] = imx_clk_gate2("ocram", "ahb", MXC_CCM_CCGR6, 2); - clk[IMX5_CLK_CAN2_SERIAL_GATE] = imx_clk_gate2("can2_serial_gate", "can_sel", MXC_CCM_CCGR4, 8); - clk[IMX5_CLK_CAN2_IPG_GATE] = imx_clk_gate2("can2_ipg_gate", "ipg", MXC_CCM_CCGR4, 6); - clk[IMX5_CLK_I2C3_GATE] = imx_clk_gate2("i2c3_gate", "per_root", MXC_CCM_CCGR1, 22); - clk[IMX5_CLK_SATA_GATE] = imx_clk_gate2("sata_gate", "ipg", MXC_CCM_CCGR4, 2); - - clk[IMX5_CLK_CKO1_SEL] = imx_clk_mux("cko1_sel", MXC_CCM_CCOSR, 0, 4, - mx53_cko1_sel, ARRAY_SIZE(mx53_cko1_sel)); - clk[IMX5_CLK_CKO1_PODF] = imx_clk_divider("cko1_podf", "cko1_sel", MXC_CCM_CCOSR, 4, 3); - clk[IMX5_CLK_CKO1] = imx_clk_gate2("cko1", "cko1_podf", MXC_CCM_CCOSR, 7); - - clk[IMX5_CLK_CKO2_SEL] = imx_clk_mux("cko2_sel", MXC_CCM_CCOSR, 16, 5, - mx53_cko2_sel, ARRAY_SIZE(mx53_cko2_sel)); - clk[IMX5_CLK_CKO2_PODF] = imx_clk_divider("cko2_podf", "cko2_sel", MXC_CCM_CCOSR, 21, 3); - clk[IMX5_CLK_CKO2] = imx_clk_gate2("cko2", "cko2_podf", MXC_CCM_CCOSR, 24); - clk[IMX5_CLK_SPDIF_XTAL_SEL] = imx_clk_mux("spdif_xtal_sel", MXC_CCM_CSCMR1, 2, 2, - mx53_spdif_xtal_sel, ARRAY_SIZE(mx53_spdif_xtal_sel)); - clk[IMX5_CLK_ARM] = imx_clk_cpu("arm", "cpu_podf", - clk[IMX5_CLK_CPU_PODF], - clk[IMX5_CLK_CPU_PODF_SEL], - clk[IMX5_CLK_PLL1_SW], - clk[IMX5_CLK_STEP_SEL]); - - imx_check_clocks(clk, ARRAY_SIZE(clk)); - - clk_data.clks = clk; - clk_data.clk_num = ARRAY_SIZE(clk); - of_clk_add_provider(np, of_clk_src_onecell_get, &clk_data); - - /* set SDHC root clock to 200MHZ*/ - clk_set_rate(clk[IMX5_CLK_ESDHC_A_PODF], 200000000); - clk_set_rate(clk[IMX5_CLK_ESDHC_B_PODF], 200000000); - - /* move can bus clk to 24MHz */ - clk_set_parent(clk[IMX5_CLK_CAN_SEL], clk[IMX5_CLK_LP_APM]); - - /* make sure step clock is running from 24MHz */ - clk_set_parent(clk[IMX5_CLK_STEP_SEL], clk[IMX5_CLK_LP_APM]); - - clk_prepare_enable(clk[IMX5_CLK_IIM_GATE]); - imx_print_silicon_rev("i.MX53", mx53_revision()); - clk_disable_unprepare(clk[IMX5_CLK_IIM_GATE]); - - r = clk_round_rate(clk[IMX5_CLK_USBOH3_PER_GATE], 54000000); - clk_set_rate(clk[IMX5_CLK_USBOH3_PER_GATE], r); -} -CLK_OF_DECLARE(imx53_ccm, "fsl,imx53-ccm", mx53_clocks_init); diff --git a/arch/arm/mach-imx/clk-imx6q.c b/arch/arm/mach-imx/clk-imx6q.c deleted file mode 100644 index a2e8ef3c0..000000000 --- a/arch/arm/mach-imx/clk-imx6q.c +++ /dev/null @@ -1,534 +0,0 @@ -/* - * Copyright 2011-2013 Freescale Semiconductor, Inc. - * Copyright 2011 Linaro Ltd. - * - * The code contained herein is licensed under the GNU General Public - * License. You may obtain a copy of the GNU General Public License - * Version 2 or later at the following locations: - * - * http://www.opensource.org/licenses/gpl-license.html - * http://www.gnu.org/copyleft/gpl.html - */ - -#include <linux/init.h> -#include <linux/types.h> -#include <linux/clk.h> -#include <linux/clkdev.h> -#include <linux/err.h> -#include <linux/io.h> -#include <linux/of.h> -#include <linux/of_address.h> -#include <linux/of_irq.h> -#include <dt-bindings/clock/imx6qdl-clock.h> - -#include "clk.h" -#include "common.h" -#include "hardware.h" - -static const char *step_sels[] = { "osc", "pll2_pfd2_396m", }; -static const char *pll1_sw_sels[] = { "pll1_sys", "step", }; -static const char *periph_pre_sels[] = { "pll2_bus", "pll2_pfd2_396m", "pll2_pfd0_352m", "pll2_198m", }; -static const char *periph_clk2_sels[] = { "pll3_usb_otg", "osc", "osc", "dummy", }; -static const char *periph2_clk2_sels[] = { "pll3_usb_otg", "pll2_bus", }; -static const char *periph_sels[] = { "periph_pre", "periph_clk2", }; -static const char *periph2_sels[] = { "periph2_pre", "periph2_clk2", }; -static const char *axi_sels[] = { "periph", "pll2_pfd2_396m", "periph", "pll3_pfd1_540m", }; -static const char *audio_sels[] = { "pll4_audio_div", "pll3_pfd2_508m", "pll3_pfd3_454m", "pll3_usb_otg", }; -static const char *gpu_axi_sels[] = { "axi", "ahb", }; -static const char *gpu2d_core_sels[] = { "axi", "pll3_usb_otg", "pll2_pfd0_352m", "pll2_pfd2_396m", }; -static const char *gpu3d_core_sels[] = { "mmdc_ch0_axi", "pll3_usb_otg", "pll2_pfd1_594m", "pll2_pfd2_396m", }; -static const char *gpu3d_shader_sels[] = { "mmdc_ch0_axi", "pll3_usb_otg", "pll2_pfd1_594m", "pll3_pfd0_720m", }; -static const char *ipu_sels[] = { "mmdc_ch0_axi", "pll2_pfd2_396m", "pll3_120m", "pll3_pfd1_540m", }; -static const char *ldb_di_sels[] = { "pll5_video_div", "pll2_pfd0_352m", "pll2_pfd2_396m", "mmdc_ch1_axi", "pll3_usb_otg", }; -static const char *ipu_di_pre_sels[] = { "mmdc_ch0_axi", "pll3_usb_otg", "pll5_video_div", "pll2_pfd0_352m", "pll2_pfd2_396m", "pll3_pfd1_540m", }; -static const char *ipu1_di0_sels[] = { "ipu1_di0_pre", "dummy", "dummy", "ldb_di0", "ldb_di1", }; -static const char *ipu1_di1_sels[] = { "ipu1_di1_pre", "dummy", "dummy", "ldb_di0", "ldb_di1", }; -static const char *ipu2_di0_sels[] = { "ipu2_di0_pre", "dummy", "dummy", "ldb_di0", "ldb_di1", }; -static const char *ipu2_di1_sels[] = { "ipu2_di1_pre", "dummy", "dummy", "ldb_di0", "ldb_di1", }; -static const char *hsi_tx_sels[] = { "pll3_120m", "pll2_pfd2_396m", }; -static const char *pcie_axi_sels[] = { "axi", "ahb", }; -static const char *ssi_sels[] = { "pll3_pfd2_508m", "pll3_pfd3_454m", "pll4_audio_div", }; -static const char *usdhc_sels[] = { "pll2_pfd2_396m", "pll2_pfd0_352m", }; -static const char *enfc_sels[] = { "pll2_pfd0_352m", "pll2_bus", "pll3_usb_otg", "pll2_pfd2_396m", }; -static const char *eim_sels[] = { "pll2_pfd2_396m", "pll3_usb_otg", "axi", "pll2_pfd0_352m", }; -static const char *eim_slow_sels[] = { "axi", "pll3_usb_otg", "pll2_pfd2_396m", "pll2_pfd0_352m", }; -static const char *vdo_axi_sels[] = { "axi", "ahb", }; -static const char *vpu_axi_sels[] = { "axi", "pll2_pfd2_396m", "pll2_pfd0_352m", }; -static const char *cko1_sels[] = { "pll3_usb_otg", "pll2_bus", "pll1_sys", "pll5_video_div", - "dummy", "axi", "enfc", "ipu1_di0", "ipu1_di1", "ipu2_di0", - "ipu2_di1", "ahb", "ipg", "ipg_per", "ckil", "pll4_audio_div", }; -static const char *cko2_sels[] = { - "mmdc_ch0_axi", "mmdc_ch1_axi", "usdhc4", "usdhc1", - "gpu2d_axi", "dummy", "ecspi_root", "gpu3d_axi", - "usdhc3", "dummy", "arm", "ipu1", - "ipu2", "vdo_axi", "osc", "gpu2d_core", - "gpu3d_core", "usdhc2", "ssi1", "ssi2", - "ssi3", "gpu3d_shader", "vpu_axi", "can_root", - "ldb_di0", "ldb_di1", "esai_extal", "eim_slow", - "uart_serial", "spdif", "asrc", "hsi_tx", -}; -static const char *cko_sels[] = { "cko1", "cko2", }; -static const char *lvds_sels[] = { - "dummy", "dummy", "dummy", "dummy", "dummy", "dummy", - "pll4_audio", "pll5_video", "pll8_mlb", "enet_ref", - "pcie_ref_125m", "sata_ref_100m", -}; -static const char *pll_bypass_src_sels[] = { "osc", "lvds1_in", "lvds2_in", "dummy", }; -static const char *pll1_bypass_sels[] = { "pll1", "pll1_bypass_src", }; -static const char *pll2_bypass_sels[] = { "pll2", "pll2_bypass_src", }; -static const char *pll3_bypass_sels[] = { "pll3", "pll3_bypass_src", }; -static const char *pll4_bypass_sels[] = { "pll4", "pll4_bypass_src", }; -static const char *pll5_bypass_sels[] = { "pll5", "pll5_bypass_src", }; -static const char *pll6_bypass_sels[] = { "pll6", "pll6_bypass_src", }; -static const char *pll7_bypass_sels[] = { "pll7", "pll7_bypass_src", }; - -static struct clk *clk[IMX6QDL_CLK_END]; -static struct clk_onecell_data clk_data; - -static unsigned int const clks_init_on[] __initconst = { - IMX6QDL_CLK_MMDC_CH0_AXI, - IMX6QDL_CLK_ROM, - IMX6QDL_CLK_ARM, -}; - -static struct clk_div_table clk_enet_ref_table[] = { - { .val = 0, .div = 20, }, - { .val = 1, .div = 10, }, - { .val = 2, .div = 5, }, - { .val = 3, .div = 4, }, - { /* sentinel */ } -}; - -static struct clk_div_table post_div_table[] = { - { .val = 2, .div = 1, }, - { .val = 1, .div = 2, }, - { .val = 0, .div = 4, }, - { /* sentinel */ } -}; - -static struct clk_div_table video_div_table[] = { - { .val = 0, .div = 1, }, - { .val = 1, .div = 2, }, - { .val = 2, .div = 1, }, - { .val = 3, .div = 4, }, - { /* sentinel */ } -}; - -static unsigned int share_count_esai; -static unsigned int share_count_asrc; -static unsigned int share_count_ssi1; -static unsigned int share_count_ssi2; -static unsigned int share_count_ssi3; -static unsigned int share_count_mipi_core_cfg; - -static void __init imx6q_clocks_init(struct device_node *ccm_node) -{ - struct device_node *np; - void __iomem *base; - int i; - int ret; - - clk[IMX6QDL_CLK_DUMMY] = imx_clk_fixed("dummy", 0); - clk[IMX6QDL_CLK_CKIL] = imx_obtain_fixed_clock("ckil", 0); - clk[IMX6QDL_CLK_CKIH] = imx_obtain_fixed_clock("ckih1", 0); - clk[IMX6QDL_CLK_OSC] = imx_obtain_fixed_clock("osc", 0); - /* Clock source from external clock via CLK1/2 PADs */ - clk[IMX6QDL_CLK_ANACLK1] = imx_obtain_fixed_clock("anaclk1", 0); - clk[IMX6QDL_CLK_ANACLK2] = imx_obtain_fixed_clock("anaclk2", 0); - - np = of_find_compatible_node(NULL, NULL, "fsl,imx6q-anatop"); - base = of_iomap(np, 0); - WARN_ON(!base); - - /* Audio/video PLL post dividers do not work on i.MX6q revision 1.0 */ - if (cpu_is_imx6q() && imx_get_soc_revision() == IMX_CHIP_REVISION_1_0) { - post_div_table[1].div = 1; - post_div_table[2].div = 1; - video_div_table[1].div = 1; - video_div_table[3].div = 1; - } - - clk[IMX6QDL_PLL1_BYPASS_SRC] = imx_clk_mux("pll1_bypass_src", base + 0x00, 14, 2, pll_bypass_src_sels, ARRAY_SIZE(pll_bypass_src_sels)); - clk[IMX6QDL_PLL2_BYPASS_SRC] = imx_clk_mux("pll2_bypass_src", base + 0x30, 14, 2, pll_bypass_src_sels, ARRAY_SIZE(pll_bypass_src_sels)); - clk[IMX6QDL_PLL3_BYPASS_SRC] = imx_clk_mux("pll3_bypass_src", base + 0x10, 14, 2, pll_bypass_src_sels, ARRAY_SIZE(pll_bypass_src_sels)); - clk[IMX6QDL_PLL4_BYPASS_SRC] = imx_clk_mux("pll4_bypass_src", base + 0x70, 14, 2, pll_bypass_src_sels, ARRAY_SIZE(pll_bypass_src_sels)); - clk[IMX6QDL_PLL5_BYPASS_SRC] = imx_clk_mux("pll5_bypass_src", base + 0xa0, 14, 2, pll_bypass_src_sels, ARRAY_SIZE(pll_bypass_src_sels)); - clk[IMX6QDL_PLL6_BYPASS_SRC] = imx_clk_mux("pll6_bypass_src", base + 0xe0, 14, 2, pll_bypass_src_sels, ARRAY_SIZE(pll_bypass_src_sels)); - clk[IMX6QDL_PLL7_BYPASS_SRC] = imx_clk_mux("pll7_bypass_src", base + 0x20, 14, 2, pll_bypass_src_sels, ARRAY_SIZE(pll_bypass_src_sels)); - - /* type name parent_name base div_mask */ - clk[IMX6QDL_CLK_PLL1] = imx_clk_pllv3(IMX_PLLV3_SYS, "pll1", "pll1_bypass_src", base + 0x00, 0x7f); - clk[IMX6QDL_CLK_PLL2] = imx_clk_pllv3(IMX_PLLV3_GENERIC, "pll2", "pll2_bypass_src", base + 0x30, 0x1); - clk[IMX6QDL_CLK_PLL3] = imx_clk_pllv3(IMX_PLLV3_USB, "pll3", "pll3_bypass_src", base + 0x10, 0x3); - clk[IMX6QDL_CLK_PLL4] = imx_clk_pllv3(IMX_PLLV3_AV, "pll4", "pll4_bypass_src", base + 0x70, 0x7f); - clk[IMX6QDL_CLK_PLL5] = imx_clk_pllv3(IMX_PLLV3_AV, "pll5", "pll5_bypass_src", base + 0xa0, 0x7f); - clk[IMX6QDL_CLK_PLL6] = imx_clk_pllv3(IMX_PLLV3_ENET, "pll6", "pll6_bypass_src", base + 0xe0, 0x3); - clk[IMX6QDL_CLK_PLL7] = imx_clk_pllv3(IMX_PLLV3_USB, "pll7", "pll7_bypass_src", base + 0x20, 0x3); - - clk[IMX6QDL_PLL1_BYPASS] = imx_clk_mux_flags("pll1_bypass", base + 0x00, 16, 1, pll1_bypass_sels, ARRAY_SIZE(pll1_bypass_sels), CLK_SET_RATE_PARENT); - clk[IMX6QDL_PLL2_BYPASS] = imx_clk_mux_flags("pll2_bypass", base + 0x30, 16, 1, pll2_bypass_sels, ARRAY_SIZE(pll2_bypass_sels), CLK_SET_RATE_PARENT); - clk[IMX6QDL_PLL3_BYPASS] = imx_clk_mux_flags("pll3_bypass", base + 0x10, 16, 1, pll3_bypass_sels, ARRAY_SIZE(pll3_bypass_sels), CLK_SET_RATE_PARENT); - clk[IMX6QDL_PLL4_BYPASS] = imx_clk_mux_flags("pll4_bypass", base + 0x70, 16, 1, pll4_bypass_sels, ARRAY_SIZE(pll4_bypass_sels), CLK_SET_RATE_PARENT); - clk[IMX6QDL_PLL5_BYPASS] = imx_clk_mux_flags("pll5_bypass", base + 0xa0, 16, 1, pll5_bypass_sels, ARRAY_SIZE(pll5_bypass_sels), CLK_SET_RATE_PARENT); - clk[IMX6QDL_PLL6_BYPASS] = imx_clk_mux_flags("pll6_bypass", base + 0xe0, 16, 1, pll6_bypass_sels, ARRAY_SIZE(pll6_bypass_sels), CLK_SET_RATE_PARENT); - clk[IMX6QDL_PLL7_BYPASS] = imx_clk_mux_flags("pll7_bypass", base + 0x20, 16, 1, pll7_bypass_sels, ARRAY_SIZE(pll7_bypass_sels), CLK_SET_RATE_PARENT); - - /* Do not bypass PLLs initially */ - clk_set_parent(clk[IMX6QDL_PLL1_BYPASS], clk[IMX6QDL_CLK_PLL1]); - clk_set_parent(clk[IMX6QDL_PLL2_BYPASS], clk[IMX6QDL_CLK_PLL2]); - clk_set_parent(clk[IMX6QDL_PLL3_BYPASS], clk[IMX6QDL_CLK_PLL3]); - clk_set_parent(clk[IMX6QDL_PLL4_BYPASS], clk[IMX6QDL_CLK_PLL4]); - clk_set_parent(clk[IMX6QDL_PLL5_BYPASS], clk[IMX6QDL_CLK_PLL5]); - clk_set_parent(clk[IMX6QDL_PLL6_BYPASS], clk[IMX6QDL_CLK_PLL6]); - clk_set_parent(clk[IMX6QDL_PLL7_BYPASS], clk[IMX6QDL_CLK_PLL7]); - - clk[IMX6QDL_CLK_PLL1_SYS] = imx_clk_gate("pll1_sys", "pll1_bypass", base + 0x00, 13); - clk[IMX6QDL_CLK_PLL2_BUS] = imx_clk_gate("pll2_bus", "pll2_bypass", base + 0x30, 13); - clk[IMX6QDL_CLK_PLL3_USB_OTG] = imx_clk_gate("pll3_usb_otg", "pll3_bypass", base + 0x10, 13); - clk[IMX6QDL_CLK_PLL4_AUDIO] = imx_clk_gate("pll4_audio", "pll4_bypass", base + 0x70, 13); - clk[IMX6QDL_CLK_PLL5_VIDEO] = imx_clk_gate("pll5_video", "pll5_bypass", base + 0xa0, 13); - clk[IMX6QDL_CLK_PLL6_ENET] = imx_clk_gate("pll6_enet", "pll6_bypass", base + 0xe0, 13); - clk[IMX6QDL_CLK_PLL7_USB_HOST] = imx_clk_gate("pll7_usb_host", "pll7_bypass", base + 0x20, 13); - - /* - * Bit 20 is the reserved and read-only bit, we do this only for: - * - Do nothing for usbphy clk_enable/disable - * - Keep refcount when do usbphy clk_enable/disable, in that case, - * the clk framework may need to enable/disable usbphy's parent - */ - clk[IMX6QDL_CLK_USBPHY1] = imx_clk_gate("usbphy1", "pll3_usb_otg", base + 0x10, 20); - clk[IMX6QDL_CLK_USBPHY2] = imx_clk_gate("usbphy2", "pll7_usb_host", base + 0x20, 20); - - /* - * usbphy*_gate needs to be on after system boots up, and software - * never needs to control it anymore. - */ - clk[IMX6QDL_CLK_USBPHY1_GATE] = imx_clk_gate("usbphy1_gate", "dummy", base + 0x10, 6); - clk[IMX6QDL_CLK_USBPHY2_GATE] = imx_clk_gate("usbphy2_gate", "dummy", base + 0x20, 6); - - clk[IMX6QDL_CLK_SATA_REF] = imx_clk_fixed_factor("sata_ref", "pll6_enet", 1, 5); - clk[IMX6QDL_CLK_PCIE_REF] = imx_clk_fixed_factor("pcie_ref", "pll6_enet", 1, 4); - - clk[IMX6QDL_CLK_SATA_REF_100M] = imx_clk_gate("sata_ref_100m", "sata_ref", base + 0xe0, 20); - clk[IMX6QDL_CLK_PCIE_REF_125M] = imx_clk_gate("pcie_ref_125m", "pcie_ref", base + 0xe0, 19); - - clk[IMX6QDL_CLK_ENET_REF] = clk_register_divider_table(NULL, "enet_ref", "pll6_enet", 0, - base + 0xe0, 0, 2, 0, clk_enet_ref_table, - &imx_ccm_lock); - - clk[IMX6QDL_CLK_LVDS1_SEL] = imx_clk_mux("lvds1_sel", base + 0x160, 0, 5, lvds_sels, ARRAY_SIZE(lvds_sels)); - clk[IMX6QDL_CLK_LVDS2_SEL] = imx_clk_mux("lvds2_sel", base + 0x160, 5, 5, lvds_sels, ARRAY_SIZE(lvds_sels)); - - /* - * lvds1_gate and lvds2_gate are pseudo-gates. Both can be - * independently configured as clock inputs or outputs. We treat - * the "output_enable" bit as a gate, even though it's really just - * enabling clock output. - */ - clk[IMX6QDL_CLK_LVDS1_GATE] = imx_clk_gate_exclusive("lvds1_gate", "lvds1_sel", base + 0x160, 10, BIT(12)); - clk[IMX6QDL_CLK_LVDS2_GATE] = imx_clk_gate_exclusive("lvds2_gate", "lvds2_sel", base + 0x160, 11, BIT(13)); - - clk[IMX6QDL_CLK_LVDS1_IN] = imx_clk_gate_exclusive("lvds1_in", "anaclk1", base + 0x160, 12, BIT(10)); - clk[IMX6QDL_CLK_LVDS2_IN] = imx_clk_gate_exclusive("lvds2_in", "anaclk2", base + 0x160, 13, BIT(11)); - - /* name parent_name reg idx */ - clk[IMX6QDL_CLK_PLL2_PFD0_352M] = imx_clk_pfd("pll2_pfd0_352m", "pll2_bus", base + 0x100, 0); - clk[IMX6QDL_CLK_PLL2_PFD1_594M] = imx_clk_pfd("pll2_pfd1_594m", "pll2_bus", base + 0x100, 1); - clk[IMX6QDL_CLK_PLL2_PFD2_396M] = imx_clk_pfd("pll2_pfd2_396m", "pll2_bus", base + 0x100, 2); - clk[IMX6QDL_CLK_PLL3_PFD0_720M] = imx_clk_pfd("pll3_pfd0_720m", "pll3_usb_otg", base + 0xf0, 0); - clk[IMX6QDL_CLK_PLL3_PFD1_540M] = imx_clk_pfd("pll3_pfd1_540m", "pll3_usb_otg", base + 0xf0, 1); - clk[IMX6QDL_CLK_PLL3_PFD2_508M] = imx_clk_pfd("pll3_pfd2_508m", "pll3_usb_otg", base + 0xf0, 2); - clk[IMX6QDL_CLK_PLL3_PFD3_454M] = imx_clk_pfd("pll3_pfd3_454m", "pll3_usb_otg", base + 0xf0, 3); - - /* name parent_name mult div */ - clk[IMX6QDL_CLK_PLL2_198M] = imx_clk_fixed_factor("pll2_198m", "pll2_pfd2_396m", 1, 2); - clk[IMX6QDL_CLK_PLL3_120M] = imx_clk_fixed_factor("pll3_120m", "pll3_usb_otg", 1, 4); - clk[IMX6QDL_CLK_PLL3_80M] = imx_clk_fixed_factor("pll3_80m", "pll3_usb_otg", 1, 6); - clk[IMX6QDL_CLK_PLL3_60M] = imx_clk_fixed_factor("pll3_60m", "pll3_usb_otg", 1, 8); - clk[IMX6QDL_CLK_TWD] = imx_clk_fixed_factor("twd", "arm", 1, 2); - clk[IMX6QDL_CLK_GPT_3M] = imx_clk_fixed_factor("gpt_3m", "osc", 1, 8); - clk[IMX6QDL_CLK_VIDEO_27M] = imx_clk_fixed_factor("video_27m", "pll3_pfd1_540m", 1, 20); - if (cpu_is_imx6dl()) { - clk[IMX6QDL_CLK_GPU2D_AXI] = imx_clk_fixed_factor("gpu2d_axi", "mmdc_ch0_axi_podf", 1, 1); - clk[IMX6QDL_CLK_GPU3D_AXI] = imx_clk_fixed_factor("gpu3d_axi", "mmdc_ch0_axi_podf", 1, 1); - } - - clk[IMX6QDL_CLK_PLL4_POST_DIV] = clk_register_divider_table(NULL, "pll4_post_div", "pll4_audio", CLK_SET_RATE_PARENT, base + 0x70, 19, 2, 0, post_div_table, &imx_ccm_lock); - clk[IMX6QDL_CLK_PLL4_AUDIO_DIV] = clk_register_divider(NULL, "pll4_audio_div", "pll4_post_div", CLK_SET_RATE_PARENT, base + 0x170, 15, 1, 0, &imx_ccm_lock); - clk[IMX6QDL_CLK_PLL5_POST_DIV] = clk_register_divider_table(NULL, "pll5_post_div", "pll5_video", CLK_SET_RATE_PARENT, base + 0xa0, 19, 2, 0, post_div_table, &imx_ccm_lock); - clk[IMX6QDL_CLK_PLL5_VIDEO_DIV] = clk_register_divider_table(NULL, "pll5_video_div", "pll5_post_div", CLK_SET_RATE_PARENT, base + 0x170, 30, 2, 0, video_div_table, &imx_ccm_lock); - - np = ccm_node; - base = of_iomap(np, 0); - WARN_ON(!base); - - imx6q_pm_set_ccm_base(base); - - /* name reg shift width parent_names num_parents */ - clk[IMX6QDL_CLK_STEP] = imx_clk_mux("step", base + 0xc, 8, 1, step_sels, ARRAY_SIZE(step_sels)); - clk[IMX6QDL_CLK_PLL1_SW] = imx_clk_mux("pll1_sw", base + 0xc, 2, 1, pll1_sw_sels, ARRAY_SIZE(pll1_sw_sels)); - clk[IMX6QDL_CLK_PERIPH_PRE] = imx_clk_mux("periph_pre", base + 0x18, 18, 2, periph_pre_sels, ARRAY_SIZE(periph_pre_sels)); - clk[IMX6QDL_CLK_PERIPH2_PRE] = imx_clk_mux("periph2_pre", base + 0x18, 21, 2, periph_pre_sels, ARRAY_SIZE(periph_pre_sels)); - clk[IMX6QDL_CLK_PERIPH_CLK2_SEL] = imx_clk_mux("periph_clk2_sel", base + 0x18, 12, 2, periph_clk2_sels, ARRAY_SIZE(periph_clk2_sels)); - clk[IMX6QDL_CLK_PERIPH2_CLK2_SEL] = imx_clk_mux("periph2_clk2_sel", base + 0x18, 20, 1, periph2_clk2_sels, ARRAY_SIZE(periph2_clk2_sels)); - clk[IMX6QDL_CLK_AXI_SEL] = imx_clk_mux("axi_sel", base + 0x14, 6, 2, axi_sels, ARRAY_SIZE(axi_sels)); - clk[IMX6QDL_CLK_ESAI_SEL] = imx_clk_mux("esai_sel", base + 0x20, 19, 2, audio_sels, ARRAY_SIZE(audio_sels)); - clk[IMX6QDL_CLK_ASRC_SEL] = imx_clk_mux("asrc_sel", base + 0x30, 7, 2, audio_sels, ARRAY_SIZE(audio_sels)); - clk[IMX6QDL_CLK_SPDIF_SEL] = imx_clk_mux("spdif_sel", base + 0x30, 20, 2, audio_sels, ARRAY_SIZE(audio_sels)); - if (cpu_is_imx6q()) { - clk[IMX6QDL_CLK_GPU2D_AXI] = imx_clk_mux("gpu2d_axi", base + 0x18, 0, 1, gpu_axi_sels, ARRAY_SIZE(gpu_axi_sels)); - clk[IMX6QDL_CLK_GPU3D_AXI] = imx_clk_mux("gpu3d_axi", base + 0x18, 1, 1, gpu_axi_sels, ARRAY_SIZE(gpu_axi_sels)); - } - clk[IMX6QDL_CLK_GPU2D_CORE_SEL] = imx_clk_mux("gpu2d_core_sel", base + 0x18, 16, 2, gpu2d_core_sels, ARRAY_SIZE(gpu2d_core_sels)); - clk[IMX6QDL_CLK_GPU3D_CORE_SEL] = imx_clk_mux("gpu3d_core_sel", base + 0x18, 4, 2, gpu3d_core_sels, ARRAY_SIZE(gpu3d_core_sels)); - clk[IMX6QDL_CLK_GPU3D_SHADER_SEL] = imx_clk_mux("gpu3d_shader_sel", base + 0x18, 8, 2, gpu3d_shader_sels, ARRAY_SIZE(gpu3d_shader_sels)); - clk[IMX6QDL_CLK_IPU1_SEL] = imx_clk_mux("ipu1_sel", base + 0x3c, 9, 2, ipu_sels, ARRAY_SIZE(ipu_sels)); - clk[IMX6QDL_CLK_IPU2_SEL] = imx_clk_mux("ipu2_sel", base + 0x3c, 14, 2, ipu_sels, ARRAY_SIZE(ipu_sels)); - clk[IMX6QDL_CLK_LDB_DI0_SEL] = imx_clk_mux_flags("ldb_di0_sel", base + 0x2c, 9, 3, ldb_di_sels, ARRAY_SIZE(ldb_di_sels), CLK_SET_RATE_PARENT); - clk[IMX6QDL_CLK_LDB_DI1_SEL] = imx_clk_mux_flags("ldb_di1_sel", base + 0x2c, 12, 3, ldb_di_sels, ARRAY_SIZE(ldb_di_sels), CLK_SET_RATE_PARENT); - clk[IMX6QDL_CLK_IPU1_DI0_PRE_SEL] = imx_clk_mux_flags("ipu1_di0_pre_sel", base + 0x34, 6, 3, ipu_di_pre_sels, ARRAY_SIZE(ipu_di_pre_sels), CLK_SET_RATE_PARENT); - clk[IMX6QDL_CLK_IPU1_DI1_PRE_SEL] = imx_clk_mux_flags("ipu1_di1_pre_sel", base + 0x34, 15, 3, ipu_di_pre_sels, ARRAY_SIZE(ipu_di_pre_sels), CLK_SET_RATE_PARENT); - clk[IMX6QDL_CLK_IPU2_DI0_PRE_SEL] = imx_clk_mux_flags("ipu2_di0_pre_sel", base + 0x38, 6, 3, ipu_di_pre_sels, ARRAY_SIZE(ipu_di_pre_sels), CLK_SET_RATE_PARENT); - clk[IMX6QDL_CLK_IPU2_DI1_PRE_SEL] = imx_clk_mux_flags("ipu2_di1_pre_sel", base + 0x38, 15, 3, ipu_di_pre_sels, ARRAY_SIZE(ipu_di_pre_sels), CLK_SET_RATE_PARENT); - clk[IMX6QDL_CLK_IPU1_DI0_SEL] = imx_clk_mux_flags("ipu1_di0_sel", base + 0x34, 0, 3, ipu1_di0_sels, ARRAY_SIZE(ipu1_di0_sels), CLK_SET_RATE_PARENT); - clk[IMX6QDL_CLK_IPU1_DI1_SEL] = imx_clk_mux_flags("ipu1_di1_sel", base + 0x34, 9, 3, ipu1_di1_sels, ARRAY_SIZE(ipu1_di1_sels), CLK_SET_RATE_PARENT); - clk[IMX6QDL_CLK_IPU2_DI0_SEL] = imx_clk_mux_flags("ipu2_di0_sel", base + 0x38, 0, 3, ipu2_di0_sels, ARRAY_SIZE(ipu2_di0_sels), CLK_SET_RATE_PARENT); - clk[IMX6QDL_CLK_IPU2_DI1_SEL] = imx_clk_mux_flags("ipu2_di1_sel", base + 0x38, 9, 3, ipu2_di1_sels, ARRAY_SIZE(ipu2_di1_sels), CLK_SET_RATE_PARENT); - clk[IMX6QDL_CLK_HSI_TX_SEL] = imx_clk_mux("hsi_tx_sel", base + 0x30, 28, 1, hsi_tx_sels, ARRAY_SIZE(hsi_tx_sels)); - clk[IMX6QDL_CLK_PCIE_AXI_SEL] = imx_clk_mux("pcie_axi_sel", base + 0x18, 10, 1, pcie_axi_sels, ARRAY_SIZE(pcie_axi_sels)); - clk[IMX6QDL_CLK_SSI1_SEL] = imx_clk_fixup_mux("ssi1_sel", base + 0x1c, 10, 2, ssi_sels, ARRAY_SIZE(ssi_sels), imx_cscmr1_fixup); - clk[IMX6QDL_CLK_SSI2_SEL] = imx_clk_fixup_mux("ssi2_sel", base + 0x1c, 12, 2, ssi_sels, ARRAY_SIZE(ssi_sels), imx_cscmr1_fixup); - clk[IMX6QDL_CLK_SSI3_SEL] = imx_clk_fixup_mux("ssi3_sel", base + 0x1c, 14, 2, ssi_sels, ARRAY_SIZE(ssi_sels), imx_cscmr1_fixup); - clk[IMX6QDL_CLK_USDHC1_SEL] = imx_clk_fixup_mux("usdhc1_sel", base + 0x1c, 16, 1, usdhc_sels, ARRAY_SIZE(usdhc_sels), imx_cscmr1_fixup); - clk[IMX6QDL_CLK_USDHC2_SEL] = imx_clk_fixup_mux("usdhc2_sel", base + 0x1c, 17, 1, usdhc_sels, ARRAY_SIZE(usdhc_sels), imx_cscmr1_fixup); - clk[IMX6QDL_CLK_USDHC3_SEL] = imx_clk_fixup_mux("usdhc3_sel", base + 0x1c, 18, 1, usdhc_sels, ARRAY_SIZE(usdhc_sels), imx_cscmr1_fixup); - clk[IMX6QDL_CLK_USDHC4_SEL] = imx_clk_fixup_mux("usdhc4_sel", base + 0x1c, 19, 1, usdhc_sels, ARRAY_SIZE(usdhc_sels), imx_cscmr1_fixup); - clk[IMX6QDL_CLK_ENFC_SEL] = imx_clk_mux("enfc_sel", base + 0x2c, 16, 2, enfc_sels, ARRAY_SIZE(enfc_sels)); - clk[IMX6QDL_CLK_EIM_SEL] = imx_clk_fixup_mux("eim_sel", base + 0x1c, 27, 2, eim_sels, ARRAY_SIZE(eim_sels), imx_cscmr1_fixup); - clk[IMX6QDL_CLK_EIM_SLOW_SEL] = imx_clk_fixup_mux("eim_slow_sel", base + 0x1c, 29, 2, eim_slow_sels, ARRAY_SIZE(eim_slow_sels), imx_cscmr1_fixup); - clk[IMX6QDL_CLK_VDO_AXI_SEL] = imx_clk_mux("vdo_axi_sel", base + 0x18, 11, 1, vdo_axi_sels, ARRAY_SIZE(vdo_axi_sels)); - clk[IMX6QDL_CLK_VPU_AXI_SEL] = imx_clk_mux("vpu_axi_sel", base + 0x18, 14, 2, vpu_axi_sels, ARRAY_SIZE(vpu_axi_sels)); - clk[IMX6QDL_CLK_CKO1_SEL] = imx_clk_mux("cko1_sel", base + 0x60, 0, 4, cko1_sels, ARRAY_SIZE(cko1_sels)); - clk[IMX6QDL_CLK_CKO2_SEL] = imx_clk_mux("cko2_sel", base + 0x60, 16, 5, cko2_sels, ARRAY_SIZE(cko2_sels)); - clk[IMX6QDL_CLK_CKO] = imx_clk_mux("cko", base + 0x60, 8, 1, cko_sels, ARRAY_SIZE(cko_sels)); - - /* name reg shift width busy: reg, shift parent_names num_parents */ - clk[IMX6QDL_CLK_PERIPH] = imx_clk_busy_mux("periph", base + 0x14, 25, 1, base + 0x48, 5, periph_sels, ARRAY_SIZE(periph_sels)); - clk[IMX6QDL_CLK_PERIPH2] = imx_clk_busy_mux("periph2", base + 0x14, 26, 1, base + 0x48, 3, periph2_sels, ARRAY_SIZE(periph2_sels)); - - /* name parent_name reg shift width */ - clk[IMX6QDL_CLK_PERIPH_CLK2] = imx_clk_divider("periph_clk2", "periph_clk2_sel", base + 0x14, 27, 3); - clk[IMX6QDL_CLK_PERIPH2_CLK2] = imx_clk_divider("periph2_clk2", "periph2_clk2_sel", base + 0x14, 0, 3); - clk[IMX6QDL_CLK_IPG] = imx_clk_divider("ipg", "ahb", base + 0x14, 8, 2); - clk[IMX6QDL_CLK_IPG_PER] = imx_clk_fixup_divider("ipg_per", "ipg", base + 0x1c, 0, 6, imx_cscmr1_fixup); - clk[IMX6QDL_CLK_ESAI_PRED] = imx_clk_divider("esai_pred", "esai_sel", base + 0x28, 9, 3); - clk[IMX6QDL_CLK_ESAI_PODF] = imx_clk_divider("esai_podf", "esai_pred", base + 0x28, 25, 3); - clk[IMX6QDL_CLK_ASRC_PRED] = imx_clk_divider("asrc_pred", "asrc_sel", base + 0x30, 12, 3); - clk[IMX6QDL_CLK_ASRC_PODF] = imx_clk_divider("asrc_podf", "asrc_pred", base + 0x30, 9, 3); - clk[IMX6QDL_CLK_SPDIF_PRED] = imx_clk_divider("spdif_pred", "spdif_sel", base + 0x30, 25, 3); - clk[IMX6QDL_CLK_SPDIF_PODF] = imx_clk_divider("spdif_podf", "spdif_pred", base + 0x30, 22, 3); - clk[IMX6QDL_CLK_CAN_ROOT] = imx_clk_divider("can_root", "pll3_60m", base + 0x20, 2, 6); - clk[IMX6QDL_CLK_ECSPI_ROOT] = imx_clk_divider("ecspi_root", "pll3_60m", base + 0x38, 19, 6); - clk[IMX6QDL_CLK_GPU2D_CORE_PODF] = imx_clk_divider("gpu2d_core_podf", "gpu2d_core_sel", base + 0x18, 23, 3); - clk[IMX6QDL_CLK_GPU3D_CORE_PODF] = imx_clk_divider("gpu3d_core_podf", "gpu3d_core_sel", base + 0x18, 26, 3); - clk[IMX6QDL_CLK_GPU3D_SHADER] = imx_clk_divider("gpu3d_shader", "gpu3d_shader_sel", base + 0x18, 29, 3); - clk[IMX6QDL_CLK_IPU1_PODF] = imx_clk_divider("ipu1_podf", "ipu1_sel", base + 0x3c, 11, 3); - clk[IMX6QDL_CLK_IPU2_PODF] = imx_clk_divider("ipu2_podf", "ipu2_sel", base + 0x3c, 16, 3); - clk[IMX6QDL_CLK_LDB_DI0_DIV_3_5] = imx_clk_fixed_factor("ldb_di0_div_3_5", "ldb_di0_sel", 2, 7); - clk[IMX6QDL_CLK_LDB_DI0_PODF] = imx_clk_divider_flags("ldb_di0_podf", "ldb_di0_div_3_5", base + 0x20, 10, 1, 0); - clk[IMX6QDL_CLK_LDB_DI1_DIV_3_5] = imx_clk_fixed_factor("ldb_di1_div_3_5", "ldb_di1_sel", 2, 7); - clk[IMX6QDL_CLK_LDB_DI1_PODF] = imx_clk_divider_flags("ldb_di1_podf", "ldb_di1_div_3_5", base + 0x20, 11, 1, 0); - clk[IMX6QDL_CLK_IPU1_DI0_PRE] = imx_clk_divider("ipu1_di0_pre", "ipu1_di0_pre_sel", base + 0x34, 3, 3); - clk[IMX6QDL_CLK_IPU1_DI1_PRE] = imx_clk_divider("ipu1_di1_pre", "ipu1_di1_pre_sel", base + 0x34, 12, 3); - clk[IMX6QDL_CLK_IPU2_DI0_PRE] = imx_clk_divider("ipu2_di0_pre", "ipu2_di0_pre_sel", base + 0x38, 3, 3); - clk[IMX6QDL_CLK_IPU2_DI1_PRE] = imx_clk_divider("ipu2_di1_pre", "ipu2_di1_pre_sel", base + 0x38, 12, 3); - clk[IMX6QDL_CLK_HSI_TX_PODF] = imx_clk_divider("hsi_tx_podf", "hsi_tx_sel", base + 0x30, 29, 3); - clk[IMX6QDL_CLK_SSI1_PRED] = imx_clk_divider("ssi1_pred", "ssi1_sel", base + 0x28, 6, 3); - clk[IMX6QDL_CLK_SSI1_PODF] = imx_clk_divider("ssi1_podf", "ssi1_pred", base + 0x28, 0, 6); - clk[IMX6QDL_CLK_SSI2_PRED] = imx_clk_divider("ssi2_pred", "ssi2_sel", base + 0x2c, 6, 3); - clk[IMX6QDL_CLK_SSI2_PODF] = imx_clk_divider("ssi2_podf", "ssi2_pred", base + 0x2c, 0, 6); - clk[IMX6QDL_CLK_SSI3_PRED] = imx_clk_divider("ssi3_pred", "ssi3_sel", base + 0x28, 22, 3); - clk[IMX6QDL_CLK_SSI3_PODF] = imx_clk_divider("ssi3_podf", "ssi3_pred", base + 0x28, 16, 6); - clk[IMX6QDL_CLK_UART_SERIAL_PODF] = imx_clk_divider("uart_serial_podf", "pll3_80m", base + 0x24, 0, 6); - clk[IMX6QDL_CLK_USDHC1_PODF] = imx_clk_divider("usdhc1_podf", "usdhc1_sel", base + 0x24, 11, 3); - clk[IMX6QDL_CLK_USDHC2_PODF] = imx_clk_divider("usdhc2_podf", "usdhc2_sel", base + 0x24, 16, 3); - clk[IMX6QDL_CLK_USDHC3_PODF] = imx_clk_divider("usdhc3_podf", "usdhc3_sel", base + 0x24, 19, 3); - clk[IMX6QDL_CLK_USDHC4_PODF] = imx_clk_divider("usdhc4_podf", "usdhc4_sel", base + 0x24, 22, 3); - clk[IMX6QDL_CLK_ENFC_PRED] = imx_clk_divider("enfc_pred", "enfc_sel", base + 0x2c, 18, 3); - clk[IMX6QDL_CLK_ENFC_PODF] = imx_clk_divider("enfc_podf", "enfc_pred", base + 0x2c, 21, 6); - clk[IMX6QDL_CLK_EIM_PODF] = imx_clk_fixup_divider("eim_podf", "eim_sel", base + 0x1c, 20, 3, imx_cscmr1_fixup); - clk[IMX6QDL_CLK_EIM_SLOW_PODF] = imx_clk_fixup_divider("eim_slow_podf", "eim_slow_sel", base + 0x1c, 23, 3, imx_cscmr1_fixup); - clk[IMX6QDL_CLK_VPU_AXI_PODF] = imx_clk_divider("vpu_axi_podf", "vpu_axi_sel", base + 0x24, 25, 3); - clk[IMX6QDL_CLK_CKO1_PODF] = imx_clk_divider("cko1_podf", "cko1_sel", base + 0x60, 4, 3); - clk[IMX6QDL_CLK_CKO2_PODF] = imx_clk_divider("cko2_podf", "cko2_sel", base + 0x60, 21, 3); - - /* name parent_name reg shift width busy: reg, shift */ - clk[IMX6QDL_CLK_AXI] = imx_clk_busy_divider("axi", "axi_sel", base + 0x14, 16, 3, base + 0x48, 0); - clk[IMX6QDL_CLK_MMDC_CH0_AXI_PODF] = imx_clk_busy_divider("mmdc_ch0_axi_podf", "periph", base + 0x14, 19, 3, base + 0x48, 4); - clk[IMX6QDL_CLK_MMDC_CH1_AXI_PODF] = imx_clk_busy_divider("mmdc_ch1_axi_podf", "periph2", base + 0x14, 3, 3, base + 0x48, 2); - clk[IMX6QDL_CLK_ARM] = imx_clk_busy_divider("arm", "pll1_sw", base + 0x10, 0, 3, base + 0x48, 16); - clk[IMX6QDL_CLK_AHB] = imx_clk_busy_divider("ahb", "periph", base + 0x14, 10, 3, base + 0x48, 1); - - /* name parent_name reg shift */ - clk[IMX6QDL_CLK_APBH_DMA] = imx_clk_gate2("apbh_dma", "usdhc3", base + 0x68, 4); - clk[IMX6QDL_CLK_ASRC] = imx_clk_gate2_shared("asrc", "asrc_podf", base + 0x68, 6, &share_count_asrc); - clk[IMX6QDL_CLK_ASRC_IPG] = imx_clk_gate2_shared("asrc_ipg", "ahb", base + 0x68, 6, &share_count_asrc); - clk[IMX6QDL_CLK_ASRC_MEM] = imx_clk_gate2_shared("asrc_mem", "ahb", base + 0x68, 6, &share_count_asrc); - clk[IMX6QDL_CLK_CAN1_IPG] = imx_clk_gate2("can1_ipg", "ipg", base + 0x68, 14); - clk[IMX6QDL_CLK_CAN1_SERIAL] = imx_clk_gate2("can1_serial", "can_root", base + 0x68, 16); - clk[IMX6QDL_CLK_CAN2_IPG] = imx_clk_gate2("can2_ipg", "ipg", base + 0x68, 18); - clk[IMX6QDL_CLK_CAN2_SERIAL] = imx_clk_gate2("can2_serial", "can_root", base + 0x68, 20); - clk[IMX6QDL_CLK_ECSPI1] = imx_clk_gate2("ecspi1", "ecspi_root", base + 0x6c, 0); - clk[IMX6QDL_CLK_ECSPI2] = imx_clk_gate2("ecspi2", "ecspi_root", base + 0x6c, 2); - clk[IMX6QDL_CLK_ECSPI3] = imx_clk_gate2("ecspi3", "ecspi_root", base + 0x6c, 4); - clk[IMX6QDL_CLK_ECSPI4] = imx_clk_gate2("ecspi4", "ecspi_root", base + 0x6c, 6); - if (cpu_is_imx6dl()) - clk[IMX6DL_CLK_I2C4] = imx_clk_gate2("i2c4", "ipg_per", base + 0x6c, 8); - else - clk[IMX6Q_CLK_ECSPI5] = imx_clk_gate2("ecspi5", "ecspi_root", base + 0x6c, 8); - clk[IMX6QDL_CLK_ENET] = imx_clk_gate2("enet", "ipg", base + 0x6c, 10); - clk[IMX6QDL_CLK_ESAI_EXTAL] = imx_clk_gate2_shared("esai_extal", "esai_podf", base + 0x6c, 16, &share_count_esai); - clk[IMX6QDL_CLK_ESAI_IPG] = imx_clk_gate2_shared("esai_ipg", "ahb", base + 0x6c, 16, &share_count_esai); - clk[IMX6QDL_CLK_ESAI_MEM] = imx_clk_gate2_shared("esai_mem", "ahb", base + 0x6c, 16, &share_count_esai); - clk[IMX6QDL_CLK_GPT_IPG] = imx_clk_gate2("gpt_ipg", "ipg", base + 0x6c, 20); - clk[IMX6QDL_CLK_GPT_IPG_PER] = imx_clk_gate2("gpt_ipg_per", "ipg_per", base + 0x6c, 22); - if (cpu_is_imx6dl()) - /* - * The multiplexer and divider of imx6q clock gpu3d_shader get - * redefined/reused as gpu2d_core_sel and gpu2d_core_podf on imx6dl. - */ - clk[IMX6QDL_CLK_GPU2D_CORE] = imx_clk_gate2("gpu2d_core", "gpu3d_shader", base + 0x6c, 24); - else - clk[IMX6QDL_CLK_GPU2D_CORE] = imx_clk_gate2("gpu2d_core", "gpu2d_core_podf", base + 0x6c, 24); - clk[IMX6QDL_CLK_GPU3D_CORE] = imx_clk_gate2("gpu3d_core", "gpu3d_core_podf", base + 0x6c, 26); - clk[IMX6QDL_CLK_HDMI_IAHB] = imx_clk_gate2("hdmi_iahb", "ahb", base + 0x70, 0); - clk[IMX6QDL_CLK_HDMI_ISFR] = imx_clk_gate2("hdmi_isfr", "video_27m", base + 0x70, 4); - clk[IMX6QDL_CLK_I2C1] = imx_clk_gate2("i2c1", "ipg_per", base + 0x70, 6); - clk[IMX6QDL_CLK_I2C2] = imx_clk_gate2("i2c2", "ipg_per", base + 0x70, 8); - clk[IMX6QDL_CLK_I2C3] = imx_clk_gate2("i2c3", "ipg_per", base + 0x70, 10); - clk[IMX6QDL_CLK_IIM] = imx_clk_gate2("iim", "ipg", base + 0x70, 12); - clk[IMX6QDL_CLK_ENFC] = imx_clk_gate2("enfc", "enfc_podf", base + 0x70, 14); - clk[IMX6QDL_CLK_VDOA] = imx_clk_gate2("vdoa", "vdo_axi", base + 0x70, 26); - clk[IMX6QDL_CLK_IPU1] = imx_clk_gate2("ipu1", "ipu1_podf", base + 0x74, 0); - clk[IMX6QDL_CLK_IPU1_DI0] = imx_clk_gate2("ipu1_di0", "ipu1_di0_sel", base + 0x74, 2); - clk[IMX6QDL_CLK_IPU1_DI1] = imx_clk_gate2("ipu1_di1", "ipu1_di1_sel", base + 0x74, 4); - clk[IMX6QDL_CLK_IPU2] = imx_clk_gate2("ipu2", "ipu2_podf", base + 0x74, 6); - clk[IMX6QDL_CLK_IPU2_DI0] = imx_clk_gate2("ipu2_di0", "ipu2_di0_sel", base + 0x74, 8); - clk[IMX6QDL_CLK_LDB_DI0] = imx_clk_gate2("ldb_di0", "ldb_di0_podf", base + 0x74, 12); - clk[IMX6QDL_CLK_LDB_DI1] = imx_clk_gate2("ldb_di1", "ldb_di1_podf", base + 0x74, 14); - clk[IMX6QDL_CLK_IPU2_DI1] = imx_clk_gate2("ipu2_di1", "ipu2_di1_sel", base + 0x74, 10); - clk[IMX6QDL_CLK_HSI_TX] = imx_clk_gate2_shared("hsi_tx", "hsi_tx_podf", base + 0x74, 16, &share_count_mipi_core_cfg); - clk[IMX6QDL_CLK_MIPI_CORE_CFG] = imx_clk_gate2_shared("mipi_core_cfg", "video_27m", base + 0x74, 16, &share_count_mipi_core_cfg); - clk[IMX6QDL_CLK_MIPI_IPG] = imx_clk_gate2_shared("mipi_ipg", "ipg", base + 0x74, 16, &share_count_mipi_core_cfg); - if (cpu_is_imx6dl()) - /* - * The multiplexer and divider of the imx6q clock gpu2d get - * redefined/reused as mlb_sys_sel and mlb_sys_clk_podf on imx6dl. - */ - clk[IMX6QDL_CLK_MLB] = imx_clk_gate2("mlb", "gpu2d_core_podf", base + 0x74, 18); - else - clk[IMX6QDL_CLK_MLB] = imx_clk_gate2("mlb", "axi", base + 0x74, 18); - clk[IMX6QDL_CLK_MMDC_CH0_AXI] = imx_clk_gate2("mmdc_ch0_axi", "mmdc_ch0_axi_podf", base + 0x74, 20); - clk[IMX6QDL_CLK_MMDC_CH1_AXI] = imx_clk_gate2("mmdc_ch1_axi", "mmdc_ch1_axi_podf", base + 0x74, 22); - clk[IMX6QDL_CLK_OCRAM] = imx_clk_gate2("ocram", "ahb", base + 0x74, 28); - clk[IMX6QDL_CLK_OPENVG_AXI] = imx_clk_gate2("openvg_axi", "axi", base + 0x74, 30); - clk[IMX6QDL_CLK_PCIE_AXI] = imx_clk_gate2("pcie_axi", "pcie_axi_sel", base + 0x78, 0); - clk[IMX6QDL_CLK_PER1_BCH] = imx_clk_gate2("per1_bch", "usdhc3", base + 0x78, 12); - clk[IMX6QDL_CLK_PWM1] = imx_clk_gate2("pwm1", "ipg_per", base + 0x78, 16); - clk[IMX6QDL_CLK_PWM2] = imx_clk_gate2("pwm2", "ipg_per", base + 0x78, 18); - clk[IMX6QDL_CLK_PWM3] = imx_clk_gate2("pwm3", "ipg_per", base + 0x78, 20); - clk[IMX6QDL_CLK_PWM4] = imx_clk_gate2("pwm4", "ipg_per", base + 0x78, 22); - clk[IMX6QDL_CLK_GPMI_BCH_APB] = imx_clk_gate2("gpmi_bch_apb", "usdhc3", base + 0x78, 24); - clk[IMX6QDL_CLK_GPMI_BCH] = imx_clk_gate2("gpmi_bch", "usdhc4", base + 0x78, 26); - clk[IMX6QDL_CLK_GPMI_IO] = imx_clk_gate2("gpmi_io", "enfc", base + 0x78, 28); - clk[IMX6QDL_CLK_GPMI_APB] = imx_clk_gate2("gpmi_apb", "usdhc3", base + 0x78, 30); - clk[IMX6QDL_CLK_ROM] = imx_clk_gate2("rom", "ahb", base + 0x7c, 0); - clk[IMX6QDL_CLK_SATA] = imx_clk_gate2("sata", "ahb", base + 0x7c, 4); - clk[IMX6QDL_CLK_SDMA] = imx_clk_gate2("sdma", "ahb", base + 0x7c, 6); - clk[IMX6QDL_CLK_SPBA] = imx_clk_gate2("spba", "ipg", base + 0x7c, 12); - clk[IMX6QDL_CLK_SPDIF] = imx_clk_gate2("spdif", "spdif_podf", base + 0x7c, 14); - clk[IMX6QDL_CLK_SSI1_IPG] = imx_clk_gate2_shared("ssi1_ipg", "ipg", base + 0x7c, 18, &share_count_ssi1); - clk[IMX6QDL_CLK_SSI2_IPG] = imx_clk_gate2_shared("ssi2_ipg", "ipg", base + 0x7c, 20, &share_count_ssi2); - clk[IMX6QDL_CLK_SSI3_IPG] = imx_clk_gate2_shared("ssi3_ipg", "ipg", base + 0x7c, 22, &share_count_ssi3); - clk[IMX6QDL_CLK_SSI1] = imx_clk_gate2_shared("ssi1", "ssi1_podf", base + 0x7c, 18, &share_count_ssi1); - clk[IMX6QDL_CLK_SSI2] = imx_clk_gate2_shared("ssi2", "ssi2_podf", base + 0x7c, 20, &share_count_ssi2); - clk[IMX6QDL_CLK_SSI3] = imx_clk_gate2_shared("ssi3", "ssi3_podf", base + 0x7c, 22, &share_count_ssi3); - clk[IMX6QDL_CLK_UART_IPG] = imx_clk_gate2("uart_ipg", "ipg", base + 0x7c, 24); - clk[IMX6QDL_CLK_UART_SERIAL] = imx_clk_gate2("uart_serial", "uart_serial_podf", base + 0x7c, 26); - clk[IMX6QDL_CLK_USBOH3] = imx_clk_gate2("usboh3", "ipg", base + 0x80, 0); - clk[IMX6QDL_CLK_USDHC1] = imx_clk_gate2("usdhc1", "usdhc1_podf", base + 0x80, 2); - clk[IMX6QDL_CLK_USDHC2] = imx_clk_gate2("usdhc2", "usdhc2_podf", base + 0x80, 4); - clk[IMX6QDL_CLK_USDHC3] = imx_clk_gate2("usdhc3", "usdhc3_podf", base + 0x80, 6); - clk[IMX6QDL_CLK_USDHC4] = imx_clk_gate2("usdhc4", "usdhc4_podf", base + 0x80, 8); - clk[IMX6QDL_CLK_EIM_SLOW] = imx_clk_gate2("eim_slow", "eim_slow_podf", base + 0x80, 10); - clk[IMX6QDL_CLK_VDO_AXI] = imx_clk_gate2("vdo_axi", "vdo_axi_sel", base + 0x80, 12); - clk[IMX6QDL_CLK_VPU_AXI] = imx_clk_gate2("vpu_axi", "vpu_axi_podf", base + 0x80, 14); - clk[IMX6QDL_CLK_CKO1] = imx_clk_gate("cko1", "cko1_podf", base + 0x60, 7); - clk[IMX6QDL_CLK_CKO2] = imx_clk_gate("cko2", "cko2_podf", base + 0x60, 24); - - /* - * The gpt_3m clock is not available on i.MX6Q TO1.0. Let's point it - * to clock gpt_ipg_per to ease the gpt driver code. - */ - if (cpu_is_imx6q() && imx_get_soc_revision() == IMX_CHIP_REVISION_1_0) - clk[IMX6QDL_CLK_GPT_3M] = clk[IMX6QDL_CLK_GPT_IPG_PER]; - - imx_check_clocks(clk, ARRAY_SIZE(clk)); - - clk_data.clks = clk; - clk_data.clk_num = ARRAY_SIZE(clk); - of_clk_add_provider(np, of_clk_src_onecell_get, &clk_data); - - clk_register_clkdev(clk[IMX6QDL_CLK_ENET_REF], "enet_ref", NULL); - - if ((imx_get_soc_revision() != IMX_CHIP_REVISION_1_0) || - cpu_is_imx6dl()) { - clk_set_parent(clk[IMX6QDL_CLK_LDB_DI0_SEL], clk[IMX6QDL_CLK_PLL5_VIDEO_DIV]); - clk_set_parent(clk[IMX6QDL_CLK_LDB_DI1_SEL], clk[IMX6QDL_CLK_PLL5_VIDEO_DIV]); - } - - clk_set_parent(clk[IMX6QDL_CLK_IPU1_DI0_PRE_SEL], clk[IMX6QDL_CLK_PLL5_VIDEO_DIV]); - clk_set_parent(clk[IMX6QDL_CLK_IPU1_DI1_PRE_SEL], clk[IMX6QDL_CLK_PLL5_VIDEO_DIV]); - clk_set_parent(clk[IMX6QDL_CLK_IPU2_DI0_PRE_SEL], clk[IMX6QDL_CLK_PLL5_VIDEO_DIV]); - clk_set_parent(clk[IMX6QDL_CLK_IPU2_DI1_PRE_SEL], clk[IMX6QDL_CLK_PLL5_VIDEO_DIV]); - clk_set_parent(clk[IMX6QDL_CLK_IPU1_DI0_SEL], clk[IMX6QDL_CLK_IPU1_DI0_PRE]); - clk_set_parent(clk[IMX6QDL_CLK_IPU1_DI1_SEL], clk[IMX6QDL_CLK_IPU1_DI1_PRE]); - clk_set_parent(clk[IMX6QDL_CLK_IPU2_DI0_SEL], clk[IMX6QDL_CLK_IPU2_DI0_PRE]); - clk_set_parent(clk[IMX6QDL_CLK_IPU2_DI1_SEL], clk[IMX6QDL_CLK_IPU2_DI1_PRE]); - - /* - * The gpmi needs 100MHz frequency in the EDO/Sync mode, - * We can not get the 100MHz from the pll2_pfd0_352m. - * So choose pll2_pfd2_396m as enfc_sel's parent. - */ - clk_set_parent(clk[IMX6QDL_CLK_ENFC_SEL], clk[IMX6QDL_CLK_PLL2_PFD2_396M]); - - for (i = 0; i < ARRAY_SIZE(clks_init_on); i++) - clk_prepare_enable(clk[clks_init_on[i]]); - - if (IS_ENABLED(CONFIG_USB_MXS_PHY)) { - clk_prepare_enable(clk[IMX6QDL_CLK_USBPHY1_GATE]); - clk_prepare_enable(clk[IMX6QDL_CLK_USBPHY2_GATE]); - } - - /* - * Let's initially set up CLKO with OSC24M, since this configuration - * is widely used by imx6q board designs to clock audio codec. - */ - ret = clk_set_parent(clk[IMX6QDL_CLK_CKO2_SEL], clk[IMX6QDL_CLK_OSC]); - if (!ret) - ret = clk_set_parent(clk[IMX6QDL_CLK_CKO], clk[IMX6QDL_CLK_CKO2]); - if (ret) - pr_warn("failed to set up CLKO: %d\n", ret); - - /* Audio-related clocks configuration */ - clk_set_parent(clk[IMX6QDL_CLK_SPDIF_SEL], clk[IMX6QDL_CLK_PLL3_PFD3_454M]); - - /* All existing boards with PCIe use LVDS1 */ - if (IS_ENABLED(CONFIG_PCI_IMX6)) - clk_set_parent(clk[IMX6QDL_CLK_LVDS1_SEL], clk[IMX6QDL_CLK_SATA_REF_100M]); - - /* Set initial power mode */ - imx6q_set_lpm(WAIT_CLOCKED); -} -CLK_OF_DECLARE(imx6q, "fsl,imx6q-ccm", imx6q_clocks_init); diff --git a/arch/arm/mach-imx/clk-imx6sl.c b/arch/arm/mach-imx/clk-imx6sl.c deleted file mode 100644 index e982ebe10..000000000 --- a/arch/arm/mach-imx/clk-imx6sl.c +++ /dev/null @@ -1,450 +0,0 @@ -/* - * Copyright 2013-2014 Freescale Semiconductor, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - */ - -#include <linux/clk.h> -#include <linux/clkdev.h> -#include <linux/err.h> -#include <linux/of.h> -#include <linux/of_address.h> -#include <linux/of_irq.h> -#include <dt-bindings/clock/imx6sl-clock.h> - -#include "clk.h" -#include "common.h" - -#define CCSR 0xc -#define BM_CCSR_PLL1_SW_CLK_SEL (1 << 2) -#define CACRR 0x10 -#define CDHIPR 0x48 -#define BM_CDHIPR_ARM_PODF_BUSY (1 << 16) -#define ARM_WAIT_DIV_396M 2 -#define ARM_WAIT_DIV_792M 4 -#define ARM_WAIT_DIV_996M 6 - -#define PLL_ARM 0x0 -#define BM_PLL_ARM_DIV_SELECT (0x7f << 0) -#define BM_PLL_ARM_POWERDOWN (1 << 12) -#define BM_PLL_ARM_ENABLE (1 << 13) -#define BM_PLL_ARM_LOCK (1 << 31) -#define PLL_ARM_DIV_792M 66 - -static const char *step_sels[] = { "osc", "pll2_pfd2", }; -static const char *pll1_sw_sels[] = { "pll1_sys", "step", }; -static const char *ocram_alt_sels[] = { "pll2_pfd2", "pll3_pfd1", }; -static const char *ocram_sels[] = { "periph", "ocram_alt_sels", }; -static const char *pre_periph_sels[] = { "pll2_bus", "pll2_pfd2", "pll2_pfd0", "pll2_198m", }; -static const char *periph_clk2_sels[] = { "pll3_usb_otg", "osc", "osc", "dummy", }; -static const char *periph2_clk2_sels[] = { "pll3_usb_otg", "pll2_bus", }; -static const char *periph_sels[] = { "pre_periph_sel", "periph_clk2_podf", }; -static const char *periph2_sels[] = { "pre_periph2_sel", "periph2_clk2_podf", }; -static const char *csi_sels[] = { "osc", "pll2_pfd2", "pll3_120m", "pll3_pfd1", }; -static const char *lcdif_axi_sels[] = { "pll2_bus", "pll2_pfd2", "pll3_usb_otg", "pll3_pfd1", }; -static const char *usdhc_sels[] = { "pll2_pfd2", "pll2_pfd0", }; -static const char *ssi_sels[] = { "pll3_pfd2", "pll3_pfd3", "pll4_audio_div", "dummy", }; -static const char *perclk_sels[] = { "ipg", "osc", }; -static const char *pxp_axi_sels[] = { "pll2_bus", "pll3_usb_otg", "pll5_video_div", "pll2_pfd0", "pll2_pfd2", "pll3_pfd3", }; -static const char *epdc_axi_sels[] = { "pll2_bus", "pll3_usb_otg", "pll5_video_div", "pll2_pfd0", "pll2_pfd2", "pll3_pfd2", }; -static const char *gpu2d_ovg_sels[] = { "pll3_pfd1", "pll3_usb_otg", "pll2_bus", "pll2_pfd2", }; -static const char *gpu2d_sels[] = { "pll2_pfd2", "pll3_usb_otg", "pll3_pfd1", "pll2_bus", }; -static const char *lcdif_pix_sels[] = { "pll2_bus", "pll3_usb_otg", "pll5_video_div", "pll2_pfd0", "pll3_pfd0", "pll3_pfd1", }; -static const char *epdc_pix_sels[] = { "pll2_bus", "pll3_usb_otg", "pll5_video_div", "pll2_pfd0", "pll2_pfd1", "pll3_pfd1", }; -static const char *audio_sels[] = { "pll4_audio_div", "pll3_pfd2", "pll3_pfd3", "pll3_usb_otg", }; -static const char *ecspi_sels[] = { "pll3_60m", "osc", }; -static const char *uart_sels[] = { "pll3_80m", "osc", }; -static const char *lvds_sels[] = { - "pll1_sys", "pll2_bus", "pll2_pfd0", "pll2_pfd1", "pll2_pfd2", "dummy", "pll4_audio", "pll5_video", - "dummy", "enet_ref", "dummy", "dummy", "pll3_usb_otg", "pll7_usb_host", "pll3_pfd0", "pll3_pfd1", - "pll3_pfd2", "pll3_pfd3", "osc", "dummy", "dummy", "dummy", "dummy", "dummy", - "dummy", "dummy", "dummy", "dummy", "dummy", "dummy", "dummy", "dummy", -}; -static const char *pll_bypass_src_sels[] = { "osc", "lvds1_in", }; -static const char *pll1_bypass_sels[] = { "pll1", "pll1_bypass_src", }; -static const char *pll2_bypass_sels[] = { "pll2", "pll2_bypass_src", }; -static const char *pll3_bypass_sels[] = { "pll3", "pll3_bypass_src", }; -static const char *pll4_bypass_sels[] = { "pll4", "pll4_bypass_src", }; -static const char *pll5_bypass_sels[] = { "pll5", "pll5_bypass_src", }; -static const char *pll6_bypass_sels[] = { "pll6", "pll6_bypass_src", }; -static const char *pll7_bypass_sels[] = { "pll7", "pll7_bypass_src", }; - -static struct clk_div_table clk_enet_ref_table[] = { - { .val = 0, .div = 20, }, - { .val = 1, .div = 10, }, - { .val = 2, .div = 5, }, - { .val = 3, .div = 4, }, - { } -}; - -static struct clk_div_table post_div_table[] = { - { .val = 2, .div = 1, }, - { .val = 1, .div = 2, }, - { .val = 0, .div = 4, }, - { } -}; - -static struct clk_div_table video_div_table[] = { - { .val = 0, .div = 1, }, - { .val = 1, .div = 2, }, - { .val = 2, .div = 1, }, - { .val = 3, .div = 4, }, - { } -}; - -static unsigned int share_count_ssi1; -static unsigned int share_count_ssi2; -static unsigned int share_count_ssi3; - -static struct clk *clks[IMX6SL_CLK_END]; -static struct clk_onecell_data clk_data; -static void __iomem *ccm_base; -static void __iomem *anatop_base; - -static const u32 clks_init_on[] __initconst = { - IMX6SL_CLK_IPG, IMX6SL_CLK_ARM, IMX6SL_CLK_MMDC_ROOT, -}; - -/* - * ERR005311 CCM: After exit from WAIT mode, unwanted interrupt(s) taken - * during WAIT mode entry process could cause cache memory - * corruption. - * - * Software workaround: - * To prevent this issue from occurring, software should ensure that the - * ARM to IPG clock ratio is less than 12:5 (that is < 2.4x), before - * entering WAIT mode. - * - * This function will set the ARM clk to max value within the 12:5 limit. - * As IPG clock is fixed at 66MHz(so ARM freq must not exceed 158.4MHz), - * ARM freq are one of below setpoints: 396MHz, 792MHz and 996MHz, since - * the clk APIs can NOT be called in idle thread(may cause kernel schedule - * as there is sleep function in PLL wait function), so here we just slow - * down ARM to below freq according to previous freq: - * - * run mode wait mode - * 396MHz -> 132MHz; - * 792MHz -> 158.4MHz; - * 996MHz -> 142.3MHz; - */ -static int imx6sl_get_arm_divider_for_wait(void) -{ - if (readl_relaxed(ccm_base + CCSR) & BM_CCSR_PLL1_SW_CLK_SEL) { - return ARM_WAIT_DIV_396M; - } else { - if ((readl_relaxed(anatop_base + PLL_ARM) & - BM_PLL_ARM_DIV_SELECT) == PLL_ARM_DIV_792M) - return ARM_WAIT_DIV_792M; - else - return ARM_WAIT_DIV_996M; - } -} - -static void imx6sl_enable_pll_arm(bool enable) -{ - static u32 saved_pll_arm; - u32 val; - - if (enable) { - saved_pll_arm = val = readl_relaxed(anatop_base + PLL_ARM); - val |= BM_PLL_ARM_ENABLE; - val &= ~BM_PLL_ARM_POWERDOWN; - writel_relaxed(val, anatop_base + PLL_ARM); - while (!(__raw_readl(anatop_base + PLL_ARM) & BM_PLL_ARM_LOCK)) - ; - } else { - writel_relaxed(saved_pll_arm, anatop_base + PLL_ARM); - } -} - -void imx6sl_set_wait_clk(bool enter) -{ - static unsigned long saved_arm_div; - int arm_div_for_wait = imx6sl_get_arm_divider_for_wait(); - - /* - * According to hardware design, arm podf change need - * PLL1 clock enabled. - */ - if (arm_div_for_wait == ARM_WAIT_DIV_396M) - imx6sl_enable_pll_arm(true); - - if (enter) { - saved_arm_div = readl_relaxed(ccm_base + CACRR); - writel_relaxed(arm_div_for_wait, ccm_base + CACRR); - } else { - writel_relaxed(saved_arm_div, ccm_base + CACRR); - } - while (__raw_readl(ccm_base + CDHIPR) & BM_CDHIPR_ARM_PODF_BUSY) - ; - - if (arm_div_for_wait == ARM_WAIT_DIV_396M) - imx6sl_enable_pll_arm(false); -} - -static void __init imx6sl_clocks_init(struct device_node *ccm_node) -{ - struct device_node *np; - void __iomem *base; - int i; - int ret; - - clks[IMX6SL_CLK_DUMMY] = imx_clk_fixed("dummy", 0); - clks[IMX6SL_CLK_CKIL] = imx_obtain_fixed_clock("ckil", 0); - clks[IMX6SL_CLK_OSC] = imx_obtain_fixed_clock("osc", 0); - /* Clock source from external clock via CLK1 PAD */ - clks[IMX6SL_CLK_ANACLK1] = imx_obtain_fixed_clock("anaclk1", 0); - - np = of_find_compatible_node(NULL, NULL, "fsl,imx6sl-anatop"); - base = of_iomap(np, 0); - WARN_ON(!base); - anatop_base = base; - - clks[IMX6SL_PLL1_BYPASS_SRC] = imx_clk_mux("pll1_bypass_src", base + 0x00, 14, 1, pll_bypass_src_sels, ARRAY_SIZE(pll_bypass_src_sels)); - clks[IMX6SL_PLL2_BYPASS_SRC] = imx_clk_mux("pll2_bypass_src", base + 0x30, 14, 1, pll_bypass_src_sels, ARRAY_SIZE(pll_bypass_src_sels)); - clks[IMX6SL_PLL3_BYPASS_SRC] = imx_clk_mux("pll3_bypass_src", base + 0x10, 14, 1, pll_bypass_src_sels, ARRAY_SIZE(pll_bypass_src_sels)); - clks[IMX6SL_PLL4_BYPASS_SRC] = imx_clk_mux("pll4_bypass_src", base + 0x70, 14, 1, pll_bypass_src_sels, ARRAY_SIZE(pll_bypass_src_sels)); - clks[IMX6SL_PLL5_BYPASS_SRC] = imx_clk_mux("pll5_bypass_src", base + 0xa0, 14, 1, pll_bypass_src_sels, ARRAY_SIZE(pll_bypass_src_sels)); - clks[IMX6SL_PLL6_BYPASS_SRC] = imx_clk_mux("pll6_bypass_src", base + 0xe0, 14, 1, pll_bypass_src_sels, ARRAY_SIZE(pll_bypass_src_sels)); - clks[IMX6SL_PLL7_BYPASS_SRC] = imx_clk_mux("pll7_bypass_src", base + 0x20, 14, 1, pll_bypass_src_sels, ARRAY_SIZE(pll_bypass_src_sels)); - - /* type name parent_name base div_mask */ - clks[IMX6SL_CLK_PLL1] = imx_clk_pllv3(IMX_PLLV3_SYS, "pll1", "pll1_bypass_src", base + 0x00, 0x7f); - clks[IMX6SL_CLK_PLL2] = imx_clk_pllv3(IMX_PLLV3_GENERIC, "pll2", "pll2_bypass_src", base + 0x30, 0x1); - clks[IMX6SL_CLK_PLL3] = imx_clk_pllv3(IMX_PLLV3_USB, "pll3", "pll3_bypass_src", base + 0x10, 0x3); - clks[IMX6SL_CLK_PLL4] = imx_clk_pllv3(IMX_PLLV3_AV, "pll4", "pll4_bypass_src", base + 0x70, 0x7f); - clks[IMX6SL_CLK_PLL5] = imx_clk_pllv3(IMX_PLLV3_AV, "pll5", "pll5_bypass_src", base + 0xa0, 0x7f); - clks[IMX6SL_CLK_PLL6] = imx_clk_pllv3(IMX_PLLV3_ENET, "pll6", "pll6_bypass_src", base + 0xe0, 0x3); - clks[IMX6SL_CLK_PLL7] = imx_clk_pllv3(IMX_PLLV3_USB, "pll7", "pll7_bypass_src", base + 0x20, 0x3); - - clks[IMX6SL_PLL1_BYPASS] = imx_clk_mux_flags("pll1_bypass", base + 0x00, 16, 1, pll1_bypass_sels, ARRAY_SIZE(pll1_bypass_sels), CLK_SET_RATE_PARENT); - clks[IMX6SL_PLL2_BYPASS] = imx_clk_mux_flags("pll2_bypass", base + 0x30, 16, 1, pll2_bypass_sels, ARRAY_SIZE(pll2_bypass_sels), CLK_SET_RATE_PARENT); - clks[IMX6SL_PLL3_BYPASS] = imx_clk_mux_flags("pll3_bypass", base + 0x10, 16, 1, pll3_bypass_sels, ARRAY_SIZE(pll3_bypass_sels), CLK_SET_RATE_PARENT); - clks[IMX6SL_PLL4_BYPASS] = imx_clk_mux_flags("pll4_bypass", base + 0x70, 16, 1, pll4_bypass_sels, ARRAY_SIZE(pll4_bypass_sels), CLK_SET_RATE_PARENT); - clks[IMX6SL_PLL5_BYPASS] = imx_clk_mux_flags("pll5_bypass", base + 0xa0, 16, 1, pll5_bypass_sels, ARRAY_SIZE(pll5_bypass_sels), CLK_SET_RATE_PARENT); - clks[IMX6SL_PLL6_BYPASS] = imx_clk_mux_flags("pll6_bypass", base + 0xe0, 16, 1, pll6_bypass_sels, ARRAY_SIZE(pll6_bypass_sels), CLK_SET_RATE_PARENT); - clks[IMX6SL_PLL7_BYPASS] = imx_clk_mux_flags("pll7_bypass", base + 0x20, 16, 1, pll7_bypass_sels, ARRAY_SIZE(pll7_bypass_sels), CLK_SET_RATE_PARENT); - - /* Do not bypass PLLs initially */ - clk_set_parent(clks[IMX6SL_PLL1_BYPASS], clks[IMX6SL_CLK_PLL1]); - clk_set_parent(clks[IMX6SL_PLL2_BYPASS], clks[IMX6SL_CLK_PLL2]); - clk_set_parent(clks[IMX6SL_PLL3_BYPASS], clks[IMX6SL_CLK_PLL3]); - clk_set_parent(clks[IMX6SL_PLL4_BYPASS], clks[IMX6SL_CLK_PLL4]); - clk_set_parent(clks[IMX6SL_PLL5_BYPASS], clks[IMX6SL_CLK_PLL5]); - clk_set_parent(clks[IMX6SL_PLL6_BYPASS], clks[IMX6SL_CLK_PLL6]); - clk_set_parent(clks[IMX6SL_PLL7_BYPASS], clks[IMX6SL_CLK_PLL7]); - - clks[IMX6SL_CLK_PLL1_SYS] = imx_clk_gate("pll1_sys", "pll1_bypass", base + 0x00, 13); - clks[IMX6SL_CLK_PLL2_BUS] = imx_clk_gate("pll2_bus", "pll2_bypass", base + 0x30, 13); - clks[IMX6SL_CLK_PLL3_USB_OTG] = imx_clk_gate("pll3_usb_otg", "pll3_bypass", base + 0x10, 13); - clks[IMX6SL_CLK_PLL4_AUDIO] = imx_clk_gate("pll4_audio", "pll4_bypass", base + 0x70, 13); - clks[IMX6SL_CLK_PLL5_VIDEO] = imx_clk_gate("pll5_video", "pll5_bypass", base + 0xa0, 13); - clks[IMX6SL_CLK_PLL6_ENET] = imx_clk_gate("pll6_enet", "pll6_bypass", base + 0xe0, 13); - clks[IMX6SL_CLK_PLL7_USB_HOST] = imx_clk_gate("pll7_usb_host", "pll7_bypass", base + 0x20, 13); - - clks[IMX6SL_CLK_LVDS1_SEL] = imx_clk_mux("lvds1_sel", base + 0x160, 0, 5, lvds_sels, ARRAY_SIZE(lvds_sels)); - clks[IMX6SL_CLK_LVDS1_OUT] = imx_clk_gate_exclusive("lvds1_out", "lvds1_sel", base + 0x160, 10, BIT(12)); - clks[IMX6SL_CLK_LVDS1_IN] = imx_clk_gate_exclusive("lvds1_in", "anaclk1", base + 0x160, 12, BIT(10)); - - /* - * usbphy1 and usbphy2 are implemented as dummy gates using reserve - * bit 20. They are used by phy driver to keep the refcount of - * parent PLL correct. usbphy1_gate and usbphy2_gate only needs to be - * turned on during boot, and software will not need to control it - * anymore after that. - */ - clks[IMX6SL_CLK_USBPHY1] = imx_clk_gate("usbphy1", "pll3_usb_otg", base + 0x10, 20); - clks[IMX6SL_CLK_USBPHY2] = imx_clk_gate("usbphy2", "pll7_usb_host", base + 0x20, 20); - clks[IMX6SL_CLK_USBPHY1_GATE] = imx_clk_gate("usbphy1_gate", "dummy", base + 0x10, 6); - clks[IMX6SL_CLK_USBPHY2_GATE] = imx_clk_gate("usbphy2_gate", "dummy", base + 0x20, 6); - - /* dev name parent_name flags reg shift width div: flags, div_table lock */ - clks[IMX6SL_CLK_PLL4_POST_DIV] = clk_register_divider_table(NULL, "pll4_post_div", "pll4_audio", CLK_SET_RATE_PARENT, base + 0x70, 19, 2, 0, post_div_table, &imx_ccm_lock); - clks[IMX6SL_CLK_PLL4_AUDIO_DIV] = clk_register_divider(NULL, "pll4_audio_div", "pll4_post_div", CLK_SET_RATE_PARENT, base + 0x170, 15, 1, 0, &imx_ccm_lock); - clks[IMX6SL_CLK_PLL5_POST_DIV] = clk_register_divider_table(NULL, "pll5_post_div", "pll5_video", CLK_SET_RATE_PARENT, base + 0xa0, 19, 2, 0, post_div_table, &imx_ccm_lock); - clks[IMX6SL_CLK_PLL5_VIDEO_DIV] = clk_register_divider_table(NULL, "pll5_video_div", "pll5_post_div", CLK_SET_RATE_PARENT, base + 0x170, 30, 2, 0, video_div_table, &imx_ccm_lock); - clks[IMX6SL_CLK_ENET_REF] = clk_register_divider_table(NULL, "enet_ref", "pll6_enet", 0, base + 0xe0, 0, 2, 0, clk_enet_ref_table, &imx_ccm_lock); - - /* name parent_name reg idx */ - clks[IMX6SL_CLK_PLL2_PFD0] = imx_clk_pfd("pll2_pfd0", "pll2_bus", base + 0x100, 0); - clks[IMX6SL_CLK_PLL2_PFD1] = imx_clk_pfd("pll2_pfd1", "pll2_bus", base + 0x100, 1); - clks[IMX6SL_CLK_PLL2_PFD2] = imx_clk_pfd("pll2_pfd2", "pll2_bus", base + 0x100, 2); - clks[IMX6SL_CLK_PLL3_PFD0] = imx_clk_pfd("pll3_pfd0", "pll3_usb_otg", base + 0xf0, 0); - clks[IMX6SL_CLK_PLL3_PFD1] = imx_clk_pfd("pll3_pfd1", "pll3_usb_otg", base + 0xf0, 1); - clks[IMX6SL_CLK_PLL3_PFD2] = imx_clk_pfd("pll3_pfd2", "pll3_usb_otg", base + 0xf0, 2); - clks[IMX6SL_CLK_PLL3_PFD3] = imx_clk_pfd("pll3_pfd3", "pll3_usb_otg", base + 0xf0, 3); - - /* name parent_name mult div */ - clks[IMX6SL_CLK_PLL2_198M] = imx_clk_fixed_factor("pll2_198m", "pll2_pfd2", 1, 2); - clks[IMX6SL_CLK_PLL3_120M] = imx_clk_fixed_factor("pll3_120m", "pll3_usb_otg", 1, 4); - clks[IMX6SL_CLK_PLL3_80M] = imx_clk_fixed_factor("pll3_80m", "pll3_usb_otg", 1, 6); - clks[IMX6SL_CLK_PLL3_60M] = imx_clk_fixed_factor("pll3_60m", "pll3_usb_otg", 1, 8); - - np = ccm_node; - base = of_iomap(np, 0); - WARN_ON(!base); - ccm_base = base; - - /* Reuse imx6q pm code */ - imx6q_pm_set_ccm_base(base); - - /* name reg shift width parent_names num_parents */ - clks[IMX6SL_CLK_STEP] = imx_clk_mux("step", base + 0xc, 8, 1, step_sels, ARRAY_SIZE(step_sels)); - clks[IMX6SL_CLK_PLL1_SW] = imx_clk_mux("pll1_sw", base + 0xc, 2, 1, pll1_sw_sels, ARRAY_SIZE(pll1_sw_sels)); - clks[IMX6SL_CLK_OCRAM_ALT_SEL] = imx_clk_mux("ocram_alt_sel", base + 0x14, 7, 1, ocram_alt_sels, ARRAY_SIZE(ocram_alt_sels)); - clks[IMX6SL_CLK_OCRAM_SEL] = imx_clk_mux("ocram_sel", base + 0x14, 6, 1, ocram_sels, ARRAY_SIZE(ocram_sels)); - clks[IMX6SL_CLK_PRE_PERIPH2_SEL] = imx_clk_mux("pre_periph2_sel", base + 0x18, 21, 2, pre_periph_sels, ARRAY_SIZE(pre_periph_sels)); - clks[IMX6SL_CLK_PRE_PERIPH_SEL] = imx_clk_mux("pre_periph_sel", base + 0x18, 18, 2, pre_periph_sels, ARRAY_SIZE(pre_periph_sels)); - clks[IMX6SL_CLK_PERIPH2_CLK2_SEL] = imx_clk_mux("periph2_clk2_sel", base + 0x18, 20, 1, periph2_clk2_sels, ARRAY_SIZE(periph2_clk2_sels)); - clks[IMX6SL_CLK_PERIPH_CLK2_SEL] = imx_clk_mux("periph_clk2_sel", base + 0x18, 12, 2, periph_clk2_sels, ARRAY_SIZE(periph_clk2_sels)); - clks[IMX6SL_CLK_CSI_SEL] = imx_clk_mux("csi_sel", base + 0x3c, 9, 2, csi_sels, ARRAY_SIZE(csi_sels)); - clks[IMX6SL_CLK_LCDIF_AXI_SEL] = imx_clk_mux("lcdif_axi_sel", base + 0x3c, 14, 2, lcdif_axi_sels, ARRAY_SIZE(lcdif_axi_sels)); - clks[IMX6SL_CLK_USDHC1_SEL] = imx_clk_fixup_mux("usdhc1_sel", base + 0x1c, 16, 1, usdhc_sels, ARRAY_SIZE(usdhc_sels), imx_cscmr1_fixup); - clks[IMX6SL_CLK_USDHC2_SEL] = imx_clk_fixup_mux("usdhc2_sel", base + 0x1c, 17, 1, usdhc_sels, ARRAY_SIZE(usdhc_sels), imx_cscmr1_fixup); - clks[IMX6SL_CLK_USDHC3_SEL] = imx_clk_fixup_mux("usdhc3_sel", base + 0x1c, 18, 1, usdhc_sels, ARRAY_SIZE(usdhc_sels), imx_cscmr1_fixup); - clks[IMX6SL_CLK_USDHC4_SEL] = imx_clk_fixup_mux("usdhc4_sel", base + 0x1c, 19, 1, usdhc_sels, ARRAY_SIZE(usdhc_sels), imx_cscmr1_fixup); - clks[IMX6SL_CLK_SSI1_SEL] = imx_clk_fixup_mux("ssi1_sel", base + 0x1c, 10, 2, ssi_sels, ARRAY_SIZE(ssi_sels), imx_cscmr1_fixup); - clks[IMX6SL_CLK_SSI2_SEL] = imx_clk_fixup_mux("ssi2_sel", base + 0x1c, 12, 2, ssi_sels, ARRAY_SIZE(ssi_sels), imx_cscmr1_fixup); - clks[IMX6SL_CLK_SSI3_SEL] = imx_clk_fixup_mux("ssi3_sel", base + 0x1c, 14, 2, ssi_sels, ARRAY_SIZE(ssi_sels), imx_cscmr1_fixup); - clks[IMX6SL_CLK_PERCLK_SEL] = imx_clk_fixup_mux("perclk_sel", base + 0x1c, 6, 1, perclk_sels, ARRAY_SIZE(perclk_sels), imx_cscmr1_fixup); - clks[IMX6SL_CLK_PXP_AXI_SEL] = imx_clk_mux("pxp_axi_sel", base + 0x34, 6, 3, pxp_axi_sels, ARRAY_SIZE(pxp_axi_sels)); - clks[IMX6SL_CLK_EPDC_AXI_SEL] = imx_clk_mux("epdc_axi_sel", base + 0x34, 15, 3, epdc_axi_sels, ARRAY_SIZE(epdc_axi_sels)); - clks[IMX6SL_CLK_GPU2D_OVG_SEL] = imx_clk_mux("gpu2d_ovg_sel", base + 0x18, 4, 2, gpu2d_ovg_sels, ARRAY_SIZE(gpu2d_ovg_sels)); - clks[IMX6SL_CLK_GPU2D_SEL] = imx_clk_mux("gpu2d_sel", base + 0x18, 8, 2, gpu2d_sels, ARRAY_SIZE(gpu2d_sels)); - clks[IMX6SL_CLK_LCDIF_PIX_SEL] = imx_clk_mux("lcdif_pix_sel", base + 0x38, 6, 3, lcdif_pix_sels, ARRAY_SIZE(lcdif_pix_sels)); - clks[IMX6SL_CLK_EPDC_PIX_SEL] = imx_clk_mux("epdc_pix_sel", base + 0x38, 15, 3, epdc_pix_sels, ARRAY_SIZE(epdc_pix_sels)); - clks[IMX6SL_CLK_SPDIF0_SEL] = imx_clk_mux("spdif0_sel", base + 0x30, 20, 2, audio_sels, ARRAY_SIZE(audio_sels)); - clks[IMX6SL_CLK_SPDIF1_SEL] = imx_clk_mux("spdif1_sel", base + 0x30, 7, 2, audio_sels, ARRAY_SIZE(audio_sels)); - clks[IMX6SL_CLK_EXTERN_AUDIO_SEL] = imx_clk_mux("extern_audio_sel", base + 0x20, 19, 2, audio_sels, ARRAY_SIZE(audio_sels)); - clks[IMX6SL_CLK_ECSPI_SEL] = imx_clk_mux("ecspi_sel", base + 0x38, 18, 1, ecspi_sels, ARRAY_SIZE(ecspi_sels)); - clks[IMX6SL_CLK_UART_SEL] = imx_clk_mux("uart_sel", base + 0x24, 6, 1, uart_sels, ARRAY_SIZE(uart_sels)); - - /* name reg shift width busy: reg, shift parent_names num_parents */ - clks[IMX6SL_CLK_PERIPH] = imx_clk_busy_mux("periph", base + 0x14, 25, 1, base + 0x48, 5, periph_sels, ARRAY_SIZE(periph_sels)); - clks[IMX6SL_CLK_PERIPH2] = imx_clk_busy_mux("periph2", base + 0x14, 26, 1, base + 0x48, 3, periph2_sels, ARRAY_SIZE(periph2_sels)); - - /* name parent_name reg shift width */ - clks[IMX6SL_CLK_OCRAM_PODF] = imx_clk_divider("ocram_podf", "ocram_sel", base + 0x14, 16, 3); - clks[IMX6SL_CLK_PERIPH_CLK2_PODF] = imx_clk_divider("periph_clk2_podf", "periph_clk2_sel", base + 0x14, 27, 3); - clks[IMX6SL_CLK_PERIPH2_CLK2_PODF] = imx_clk_divider("periph2_clk2_podf", "periph2_clk2_sel", base + 0x14, 0, 3); - clks[IMX6SL_CLK_IPG] = imx_clk_divider("ipg", "ahb", base + 0x14, 8, 2); - clks[IMX6SL_CLK_CSI_PODF] = imx_clk_divider("csi_podf", "csi_sel", base + 0x3c, 11, 3); - clks[IMX6SL_CLK_LCDIF_AXI_PODF] = imx_clk_divider("lcdif_axi_podf", "lcdif_axi_sel", base + 0x3c, 16, 3); - clks[IMX6SL_CLK_USDHC1_PODF] = imx_clk_divider("usdhc1_podf", "usdhc1_sel", base + 0x24, 11, 3); - clks[IMX6SL_CLK_USDHC2_PODF] = imx_clk_divider("usdhc2_podf", "usdhc2_sel", base + 0x24, 16, 3); - clks[IMX6SL_CLK_USDHC3_PODF] = imx_clk_divider("usdhc3_podf", "usdhc3_sel", base + 0x24, 19, 3); - clks[IMX6SL_CLK_USDHC4_PODF] = imx_clk_divider("usdhc4_podf", "usdhc4_sel", base + 0x24, 22, 3); - clks[IMX6SL_CLK_SSI1_PRED] = imx_clk_divider("ssi1_pred", "ssi1_sel", base + 0x28, 6, 3); - clks[IMX6SL_CLK_SSI1_PODF] = imx_clk_divider("ssi1_podf", "ssi1_pred", base + 0x28, 0, 6); - clks[IMX6SL_CLK_SSI2_PRED] = imx_clk_divider("ssi2_pred", "ssi2_sel", base + 0x2c, 6, 3); - clks[IMX6SL_CLK_SSI2_PODF] = imx_clk_divider("ssi2_podf", "ssi2_pred", base + 0x2c, 0, 6); - clks[IMX6SL_CLK_SSI3_PRED] = imx_clk_divider("ssi3_pred", "ssi3_sel", base + 0x28, 22, 3); - clks[IMX6SL_CLK_SSI3_PODF] = imx_clk_divider("ssi3_podf", "ssi3_pred", base + 0x28, 16, 6); - clks[IMX6SL_CLK_PERCLK] = imx_clk_fixup_divider("perclk", "perclk_sel", base + 0x1c, 0, 6, imx_cscmr1_fixup); - clks[IMX6SL_CLK_PXP_AXI_PODF] = imx_clk_divider("pxp_axi_podf", "pxp_axi_sel", base + 0x34, 3, 3); - clks[IMX6SL_CLK_EPDC_AXI_PODF] = imx_clk_divider("epdc_axi_podf", "epdc_axi_sel", base + 0x34, 12, 3); - clks[IMX6SL_CLK_GPU2D_OVG_PODF] = imx_clk_divider("gpu2d_ovg_podf", "gpu2d_ovg_sel", base + 0x18, 26, 3); - clks[IMX6SL_CLK_GPU2D_PODF] = imx_clk_divider("gpu2d_podf", "gpu2d_sel", base + 0x18, 29, 3); - clks[IMX6SL_CLK_LCDIF_PIX_PRED] = imx_clk_divider("lcdif_pix_pred", "lcdif_pix_sel", base + 0x38, 3, 3); - clks[IMX6SL_CLK_EPDC_PIX_PRED] = imx_clk_divider("epdc_pix_pred", "epdc_pix_sel", base + 0x38, 12, 3); - clks[IMX6SL_CLK_LCDIF_PIX_PODF] = imx_clk_fixup_divider("lcdif_pix_podf", "lcdif_pix_pred", base + 0x1c, 20, 3, imx_cscmr1_fixup); - clks[IMX6SL_CLK_EPDC_PIX_PODF] = imx_clk_divider("epdc_pix_podf", "epdc_pix_pred", base + 0x18, 23, 3); - clks[IMX6SL_CLK_SPDIF0_PRED] = imx_clk_divider("spdif0_pred", "spdif0_sel", base + 0x30, 25, 3); - clks[IMX6SL_CLK_SPDIF0_PODF] = imx_clk_divider("spdif0_podf", "spdif0_pred", base + 0x30, 22, 3); - clks[IMX6SL_CLK_SPDIF1_PRED] = imx_clk_divider("spdif1_pred", "spdif1_sel", base + 0x30, 12, 3); - clks[IMX6SL_CLK_SPDIF1_PODF] = imx_clk_divider("spdif1_podf", "spdif1_pred", base + 0x30, 9, 3); - clks[IMX6SL_CLK_EXTERN_AUDIO_PRED] = imx_clk_divider("extern_audio_pred", "extern_audio_sel", base + 0x28, 9, 3); - clks[IMX6SL_CLK_EXTERN_AUDIO_PODF] = imx_clk_divider("extern_audio_podf", "extern_audio_pred", base + 0x28, 25, 3); - clks[IMX6SL_CLK_ECSPI_ROOT] = imx_clk_divider("ecspi_root", "ecspi_sel", base + 0x38, 19, 6); - clks[IMX6SL_CLK_UART_ROOT] = imx_clk_divider("uart_root", "uart_sel", base + 0x24, 0, 6); - - /* name parent_name reg shift width busy: reg, shift */ - clks[IMX6SL_CLK_AHB] = imx_clk_busy_divider("ahb", "periph", base + 0x14, 10, 3, base + 0x48, 1); - clks[IMX6SL_CLK_MMDC_ROOT] = imx_clk_busy_divider("mmdc", "periph2", base + 0x14, 3, 3, base + 0x48, 2); - clks[IMX6SL_CLK_ARM] = imx_clk_busy_divider("arm", "pll1_sw", base + 0x10, 0, 3, base + 0x48, 16); - - /* name parent_name reg shift */ - clks[IMX6SL_CLK_ECSPI1] = imx_clk_gate2("ecspi1", "ecspi_root", base + 0x6c, 0); - clks[IMX6SL_CLK_ECSPI2] = imx_clk_gate2("ecspi2", "ecspi_root", base + 0x6c, 2); - clks[IMX6SL_CLK_ECSPI3] = imx_clk_gate2("ecspi3", "ecspi_root", base + 0x6c, 4); - clks[IMX6SL_CLK_ECSPI4] = imx_clk_gate2("ecspi4", "ecspi_root", base + 0x6c, 6); - clks[IMX6SL_CLK_ENET] = imx_clk_gate2("enet", "ipg", base + 0x6c, 10); - clks[IMX6SL_CLK_EPIT1] = imx_clk_gate2("epit1", "perclk", base + 0x6c, 12); - clks[IMX6SL_CLK_EPIT2] = imx_clk_gate2("epit2", "perclk", base + 0x6c, 14); - clks[IMX6SL_CLK_EXTERN_AUDIO] = imx_clk_gate2("extern_audio", "extern_audio_podf", base + 0x6c, 16); - clks[IMX6SL_CLK_GPT] = imx_clk_gate2("gpt", "perclk", base + 0x6c, 20); - clks[IMX6SL_CLK_GPT_SERIAL] = imx_clk_gate2("gpt_serial", "perclk", base + 0x6c, 22); - clks[IMX6SL_CLK_GPU2D_OVG] = imx_clk_gate2("gpu2d_ovg", "gpu2d_ovg_podf", base + 0x6c, 26); - clks[IMX6SL_CLK_I2C1] = imx_clk_gate2("i2c1", "perclk", base + 0x70, 6); - clks[IMX6SL_CLK_I2C2] = imx_clk_gate2("i2c2", "perclk", base + 0x70, 8); - clks[IMX6SL_CLK_I2C3] = imx_clk_gate2("i2c3", "perclk", base + 0x70, 10); - clks[IMX6SL_CLK_OCOTP] = imx_clk_gate2("ocotp", "ipg", base + 0x70, 12); - clks[IMX6SL_CLK_CSI] = imx_clk_gate2("csi", "csi_podf", base + 0x74, 0); - clks[IMX6SL_CLK_PXP_AXI] = imx_clk_gate2("pxp_axi", "pxp_axi_podf", base + 0x74, 2); - clks[IMX6SL_CLK_EPDC_AXI] = imx_clk_gate2("epdc_axi", "epdc_axi_podf", base + 0x74, 4); - clks[IMX6SL_CLK_LCDIF_AXI] = imx_clk_gate2("lcdif_axi", "lcdif_axi_podf", base + 0x74, 6); - clks[IMX6SL_CLK_LCDIF_PIX] = imx_clk_gate2("lcdif_pix", "lcdif_pix_podf", base + 0x74, 8); - clks[IMX6SL_CLK_EPDC_PIX] = imx_clk_gate2("epdc_pix", "epdc_pix_podf", base + 0x74, 10); - clks[IMX6SL_CLK_OCRAM] = imx_clk_gate2("ocram", "ocram_podf", base + 0x74, 28); - clks[IMX6SL_CLK_PWM1] = imx_clk_gate2("pwm1", "perclk", base + 0x78, 16); - clks[IMX6SL_CLK_PWM2] = imx_clk_gate2("pwm2", "perclk", base + 0x78, 18); - clks[IMX6SL_CLK_PWM3] = imx_clk_gate2("pwm3", "perclk", base + 0x78, 20); - clks[IMX6SL_CLK_PWM4] = imx_clk_gate2("pwm4", "perclk", base + 0x78, 22); - clks[IMX6SL_CLK_SDMA] = imx_clk_gate2("sdma", "ipg", base + 0x7c, 6); - clks[IMX6SL_CLK_SPBA] = imx_clk_gate2("spba", "ipg", base + 0x7c, 12); - clks[IMX6SL_CLK_SPDIF] = imx_clk_gate2("spdif", "spdif0_podf", base + 0x7c, 14); - clks[IMX6SL_CLK_SSI1_IPG] = imx_clk_gate2_shared("ssi1_ipg", "ipg", base + 0x7c, 18, &share_count_ssi1); - clks[IMX6SL_CLK_SSI2_IPG] = imx_clk_gate2_shared("ssi2_ipg", "ipg", base + 0x7c, 20, &share_count_ssi2); - clks[IMX6SL_CLK_SSI3_IPG] = imx_clk_gate2_shared("ssi3_ipg", "ipg", base + 0x7c, 22, &share_count_ssi3); - clks[IMX6SL_CLK_SSI1] = imx_clk_gate2_shared("ssi1", "ssi1_podf", base + 0x7c, 18, &share_count_ssi1); - clks[IMX6SL_CLK_SSI2] = imx_clk_gate2_shared("ssi2", "ssi2_podf", base + 0x7c, 20, &share_count_ssi2); - clks[IMX6SL_CLK_SSI3] = imx_clk_gate2_shared("ssi3", "ssi3_podf", base + 0x7c, 22, &share_count_ssi3); - clks[IMX6SL_CLK_UART] = imx_clk_gate2("uart", "ipg", base + 0x7c, 24); - clks[IMX6SL_CLK_UART_SERIAL] = imx_clk_gate2("uart_serial", "uart_root", base + 0x7c, 26); - clks[IMX6SL_CLK_USBOH3] = imx_clk_gate2("usboh3", "ipg", base + 0x80, 0); - clks[IMX6SL_CLK_USDHC1] = imx_clk_gate2("usdhc1", "usdhc1_podf", base + 0x80, 2); - clks[IMX6SL_CLK_USDHC2] = imx_clk_gate2("usdhc2", "usdhc2_podf", base + 0x80, 4); - clks[IMX6SL_CLK_USDHC3] = imx_clk_gate2("usdhc3", "usdhc3_podf", base + 0x80, 6); - clks[IMX6SL_CLK_USDHC4] = imx_clk_gate2("usdhc4", "usdhc4_podf", base + 0x80, 8); - - imx_check_clocks(clks, ARRAY_SIZE(clks)); - - clk_data.clks = clks; - clk_data.clk_num = ARRAY_SIZE(clks); - of_clk_add_provider(np, of_clk_src_onecell_get, &clk_data); - - /* Ensure the AHB clk is at 132MHz. */ - ret = clk_set_rate(clks[IMX6SL_CLK_AHB], 132000000); - if (ret) - pr_warn("%s: failed to set AHB clock rate %d!\n", - __func__, ret); - - /* - * Make sure those always on clocks are enabled to maintain the correct - * usecount and enabling/disabling of parent PLLs. - */ - for (i = 0; i < ARRAY_SIZE(clks_init_on); i++) - clk_prepare_enable(clks[clks_init_on[i]]); - - if (IS_ENABLED(CONFIG_USB_MXS_PHY)) { - clk_prepare_enable(clks[IMX6SL_CLK_USBPHY1_GATE]); - clk_prepare_enable(clks[IMX6SL_CLK_USBPHY2_GATE]); - } - - /* Audio-related clocks configuration */ - clk_set_parent(clks[IMX6SL_CLK_SPDIF0_SEL], clks[IMX6SL_CLK_PLL3_PFD3]); - - /* set PLL5 video as lcdif pix parent clock */ - clk_set_parent(clks[IMX6SL_CLK_LCDIF_PIX_SEL], - clks[IMX6SL_CLK_PLL5_VIDEO_DIV]); - - clk_set_parent(clks[IMX6SL_CLK_LCDIF_AXI_SEL], - clks[IMX6SL_CLK_PLL2_PFD2]); - - /* Set initial power mode */ - imx6q_set_lpm(WAIT_CLOCKED); -} -CLK_OF_DECLARE(imx6sl, "fsl,imx6sl-ccm", imx6sl_clocks_init); diff --git a/arch/arm/mach-imx/clk-imx6sx.c b/arch/arm/mach-imx/clk-imx6sx.c deleted file mode 100644 index 5a3e5a159..000000000 --- a/arch/arm/mach-imx/clk-imx6sx.c +++ /dev/null @@ -1,567 +0,0 @@ -/* - * Copyright (C) 2014 Freescale Semiconductor, Inc. - * - * The code contained herein is licensed under the GNU General Public - * License. You may obtain a copy of the GNU General Public License - * Version 2 or later at the following locations: - * - * http://www.opensource.org/licenses/gpl-license.html - * http://www.gnu.org/copyleft/gpl.html - */ - -#include <dt-bindings/clock/imx6sx-clock.h> -#include <linux/clk.h> -#include <linux/clkdev.h> -#include <linux/err.h> -#include <linux/init.h> -#include <linux/io.h> -#include <linux/of.h> -#include <linux/of_address.h> -#include <linux/of_irq.h> -#include <linux/types.h> - -#include "clk.h" -#include "common.h" - -#define CCDR 0x4 -#define BM_CCM_CCDR_MMDC_CH0_MASK (0x2 << 16) - -static const char *step_sels[] = { "osc", "pll2_pfd2_396m", }; -static const char *pll1_sw_sels[] = { "pll1_sys", "step", }; -static const char *periph_pre_sels[] = { "pll2_bus", "pll2_pfd2_396m", "pll2_pfd0_352m", "pll2_198m", }; -static const char *periph2_pre_sels[] = { "pll2_bus", "pll2_pfd2_396m", "pll2_pfd0_352m", "pll4_audio_div", }; -static const char *periph_clk2_sels[] = { "pll3_usb_otg", "osc", "osc", }; -static const char *periph2_clk2_sels[] = { "pll3_usb_otg", "osc", }; -static const char *periph_sels[] = { "periph_pre", "periph_clk2", }; -static const char *periph2_sels[] = { "periph2_pre", "periph2_clk2", }; -static const char *ocram_sels[] = { "periph", "pll2_pfd2_396m", "periph", "pll3_pfd1_540m", }; -static const char *audio_sels[] = { "pll4_audio_div", "pll3_pfd2_508m", "pll5_video_div", "pll3_usb_otg", }; -static const char *gpu_axi_sels[] = { "pll2_pfd2_396m", "pll3_pfd0_720m", "pll3_pfd1_540m", "pll2_bus", }; -static const char *gpu_core_sels[] = { "pll3_pfd1_540m", "pll3_pfd0_720m", "pll2_bus", "pll2_pfd2_396m", }; -static const char *ldb_di0_div_sels[] = { "ldb_di0_div_3_5", "ldb_di0_div_7", }; -static const char *ldb_di1_div_sels[] = { "ldb_di1_div_3_5", "ldb_di1_div_7", }; -static const char *ldb_di0_sels[] = { "pll5_video_div", "pll2_pfd0_352m", "pll2_pfd2_396m", "pll2_pfd3_594m", "pll2_pfd1_594m", "pll3_pfd3_454m", }; -static const char *ldb_di1_sels[] = { "pll3_usb_otg", "pll2_pfd0_352m", "pll2_pfd2_396m", "pll2_bus", "pll3_pfd3_454m", "pll3_pfd2_508m", }; -static const char *pcie_axi_sels[] = { "axi", "ahb", }; -static const char *ssi_sels[] = { "pll3_pfd2_508m", "pll5_video_div", "pll4_audio_div", }; -static const char *qspi1_sels[] = { "pll3_usb_otg", "pll2_pfd0_352m", "pll2_pfd2_396m", "pll2_bus", "pll3_pfd3_454m", "pll3_pfd2_508m", }; -static const char *perclk_sels[] = { "ipg", "osc", }; -static const char *usdhc_sels[] = { "pll2_pfd2_396m", "pll2_pfd0_352m", }; -static const char *vid_sels[] = { "pll3_pfd1_540m", "pll3_usb_otg", "pll3_pfd3_454m", "pll4_audio_div", "pll5_video_div", }; -static const char *can_sels[] = { "pll3_60m", "osc", "pll3_80m", "dummy", }; -static const char *uart_sels[] = { "pll3_80m", "osc", }; -static const char *qspi2_sels[] = { "pll2_pfd0_352m", "pll2_bus", "pll3_usb_otg", "pll2_pfd2_396m", "pll3_pfd3_454m", "dummy", "dummy", "dummy", }; -static const char *enet_pre_sels[] = { "pll2_bus", "pll3_usb_otg", "pll5_video_div", "pll2_pfd0_352m", "pll2_pfd2_396m", "pll3_pfd2_508m", }; -static const char *enet_sels[] = { "enet_podf", "ipp_di0", "ipp_di1", "ldb_di0", "ldb_di1", }; -static const char *m4_pre_sels[] = { "pll2_bus", "pll3_usb_otg", "osc", "pll2_pfd0_352m", "pll2_pfd2_396m", "pll3_pfd3_454m", }; -static const char *m4_sels[] = { "m4_pre_sel", "ipp_di0", "ipp_di1", "ldb_di0", "ldb_di1", }; -static const char *eim_slow_sels[] = { "ocram", "pll3_usb_otg", "pll2_pfd2_396m", "pll2_pfd0_352m", }; -static const char *ecspi_sels[] = { "pll3_60m", "osc", }; -static const char *lcdif1_pre_sels[] = { "pll2_bus", "pll3_pfd3_454m", "pll5_video_div", "pll2_pfd0_352m", "pll2_pfd1_594m", "pll3_pfd1_540m", }; -static const char *lcdif1_sels[] = { "lcdif1_podf", "ipp_di0", "ipp_di1", "ldb_di0", "ldb_di1", }; -static const char *lcdif2_pre_sels[] = { "pll2_bus", "pll3_pfd3_454m", "pll5_video_div", "pll2_pfd0_352m", "pll2_pfd3_594m", "pll3_pfd1_540m", }; -static const char *lcdif2_sels[] = { "lcdif2_podf", "ipp_di0", "ipp_di1", "ldb_di0", "ldb_di1", }; -static const char *display_sels[] = { "pll2_bus", "pll2_pfd2_396m", "pll3_usb_otg", "pll3_pfd1_540m", }; -static const char *csi_sels[] = { "osc", "pll2_pfd2_396m", "pll3_120m", "pll3_pfd1_540m", }; -static const char *cko1_sels[] = { - "pll3_usb_otg", "pll2_bus", "pll1_sys", "pll5_video_div", - "dummy", "ocram", "dummy", "pxp_axi", "epdc_axi", "lcdif_pix", - "epdc_pix", "ahb", "ipg", "perclk", "ckil", "pll4_audio_div", -}; -static const char *cko2_sels[] = { - "dummy", "mmdc_p0_fast", "usdhc4", "usdhc1", "dummy", "wrck", - "ecspi_root", "dummy", "usdhc3", "pcie", "arm", "csi_core", - "lcdif_axi", "dummy", "osc", "dummy", "gpu2d_ovg_core", - "usdhc2", "ssi1", "ssi2", "ssi3", "gpu2d_core", "dummy", - "dummy", "dummy", "dummy", "esai_extal", "eim_slow", "uart_serial", - "spdif", "asrc", "dummy", -}; -static const char *cko_sels[] = { "cko1", "cko2", }; -static const char *lvds_sels[] = { - "arm", "pll1_sys", "dummy", "dummy", "dummy", "dummy", "dummy", "pll5_video_div", - "dummy", "dummy", "pcie_ref_125m", "dummy", "usbphy1", "usbphy2", -}; -static const char *pll_bypass_src_sels[] = { "osc", "lvds1_in", }; -static const char *pll1_bypass_sels[] = { "pll1", "pll1_bypass_src", }; -static const char *pll2_bypass_sels[] = { "pll2", "pll2_bypass_src", }; -static const char *pll3_bypass_sels[] = { "pll3", "pll3_bypass_src", }; -static const char *pll4_bypass_sels[] = { "pll4", "pll4_bypass_src", }; -static const char *pll5_bypass_sels[] = { "pll5", "pll5_bypass_src", }; -static const char *pll6_bypass_sels[] = { "pll6", "pll6_bypass_src", }; -static const char *pll7_bypass_sels[] = { "pll7", "pll7_bypass_src", }; - -static struct clk *clks[IMX6SX_CLK_CLK_END]; -static struct clk_onecell_data clk_data; - -static int const clks_init_on[] __initconst = { - IMX6SX_CLK_AIPS_TZ1, IMX6SX_CLK_AIPS_TZ2, IMX6SX_CLK_AIPS_TZ3, - IMX6SX_CLK_IPMUX1, IMX6SX_CLK_IPMUX2, IMX6SX_CLK_IPMUX3, - IMX6SX_CLK_WAKEUP, IMX6SX_CLK_MMDC_P0_FAST, IMX6SX_CLK_MMDC_P0_IPG, - IMX6SX_CLK_ROM, IMX6SX_CLK_ARM, IMX6SX_CLK_IPG, IMX6SX_CLK_OCRAM, - IMX6SX_CLK_PER2_MAIN, IMX6SX_CLK_PERCLK, IMX6SX_CLK_M4, - IMX6SX_CLK_QSPI1, IMX6SX_CLK_QSPI2, IMX6SX_CLK_UART_IPG, - IMX6SX_CLK_UART_SERIAL, IMX6SX_CLK_I2C3, IMX6SX_CLK_ECSPI5, - IMX6SX_CLK_CAN1_IPG, IMX6SX_CLK_CAN1_SERIAL, IMX6SX_CLK_CAN2_IPG, - IMX6SX_CLK_CAN2_SERIAL, IMX6SX_CLK_CANFD, IMX6SX_CLK_EPIT1, - IMX6SX_CLK_EPIT2, -}; - -static struct clk_div_table clk_enet_ref_table[] = { - { .val = 0, .div = 20, }, - { .val = 1, .div = 10, }, - { .val = 2, .div = 5, }, - { .val = 3, .div = 4, }, - { } -}; - -static struct clk_div_table post_div_table[] = { - { .val = 2, .div = 1, }, - { .val = 1, .div = 2, }, - { .val = 0, .div = 4, }, - { } -}; - -static struct clk_div_table video_div_table[] = { - { .val = 0, .div = 1, }, - { .val = 1, .div = 2, }, - { .val = 2, .div = 1, }, - { .val = 3, .div = 4, }, - { } -}; - -static u32 share_count_asrc; -static u32 share_count_audio; -static u32 share_count_esai; -static u32 share_count_ssi1; -static u32 share_count_ssi2; -static u32 share_count_ssi3; - -static void __init imx6sx_clocks_init(struct device_node *ccm_node) -{ - struct device_node *np; - void __iomem *base; - int i; - - clks[IMX6SX_CLK_DUMMY] = imx_clk_fixed("dummy", 0); - - clks[IMX6SX_CLK_CKIL] = of_clk_get_by_name(ccm_node, "ckil"); - clks[IMX6SX_CLK_OSC] = of_clk_get_by_name(ccm_node, "osc"); - - /* ipp_di clock is external input */ - clks[IMX6SX_CLK_IPP_DI0] = of_clk_get_by_name(ccm_node, "ipp_di0"); - clks[IMX6SX_CLK_IPP_DI1] = of_clk_get_by_name(ccm_node, "ipp_di1"); - - /* Clock source from external clock via CLK1 PAD */ - clks[IMX6SX_CLK_ANACLK1] = imx_obtain_fixed_clock("anaclk1", 0); - - np = of_find_compatible_node(NULL, NULL, "fsl,imx6sx-anatop"); - base = of_iomap(np, 0); - WARN_ON(!base); - - clks[IMX6SX_PLL1_BYPASS_SRC] = imx_clk_mux("pll1_bypass_src", base + 0x00, 14, 1, pll_bypass_src_sels, ARRAY_SIZE(pll_bypass_src_sels)); - clks[IMX6SX_PLL2_BYPASS_SRC] = imx_clk_mux("pll2_bypass_src", base + 0x30, 14, 1, pll_bypass_src_sels, ARRAY_SIZE(pll_bypass_src_sels)); - clks[IMX6SX_PLL3_BYPASS_SRC] = imx_clk_mux("pll3_bypass_src", base + 0x10, 14, 1, pll_bypass_src_sels, ARRAY_SIZE(pll_bypass_src_sels)); - clks[IMX6SX_PLL4_BYPASS_SRC] = imx_clk_mux("pll4_bypass_src", base + 0x70, 14, 1, pll_bypass_src_sels, ARRAY_SIZE(pll_bypass_src_sels)); - clks[IMX6SX_PLL5_BYPASS_SRC] = imx_clk_mux("pll5_bypass_src", base + 0xa0, 14, 1, pll_bypass_src_sels, ARRAY_SIZE(pll_bypass_src_sels)); - clks[IMX6SX_PLL6_BYPASS_SRC] = imx_clk_mux("pll6_bypass_src", base + 0xe0, 14, 1, pll_bypass_src_sels, ARRAY_SIZE(pll_bypass_src_sels)); - clks[IMX6SX_PLL7_BYPASS_SRC] = imx_clk_mux("pll7_bypass_src", base + 0x20, 14, 1, pll_bypass_src_sels, ARRAY_SIZE(pll_bypass_src_sels)); - - /* type name parent_name base div_mask */ - clks[IMX6SX_CLK_PLL1] = imx_clk_pllv3(IMX_PLLV3_SYS, "pll1", "pll1_bypass_src", base + 0x00, 0x7f); - clks[IMX6SX_CLK_PLL2] = imx_clk_pllv3(IMX_PLLV3_GENERIC, "pll2", "pll2_bypass_src", base + 0x30, 0x1); - clks[IMX6SX_CLK_PLL3] = imx_clk_pllv3(IMX_PLLV3_USB, "pll3", "pll3_bypass_src", base + 0x10, 0x3); - clks[IMX6SX_CLK_PLL4] = imx_clk_pllv3(IMX_PLLV3_AV, "pll4", "pll4_bypass_src", base + 0x70, 0x7f); - clks[IMX6SX_CLK_PLL5] = imx_clk_pllv3(IMX_PLLV3_AV, "pll5", "pll5_bypass_src", base + 0xa0, 0x7f); - clks[IMX6SX_CLK_PLL6] = imx_clk_pllv3(IMX_PLLV3_ENET, "pll6", "pll6_bypass_src", base + 0xe0, 0x3); - clks[IMX6SX_CLK_PLL7] = imx_clk_pllv3(IMX_PLLV3_USB, "pll7", "pll7_bypass_src", base + 0x20, 0x3); - - clks[IMX6SX_PLL1_BYPASS] = imx_clk_mux_flags("pll1_bypass", base + 0x00, 16, 1, pll1_bypass_sels, ARRAY_SIZE(pll1_bypass_sels), CLK_SET_RATE_PARENT); - clks[IMX6SX_PLL2_BYPASS] = imx_clk_mux_flags("pll2_bypass", base + 0x30, 16, 1, pll2_bypass_sels, ARRAY_SIZE(pll2_bypass_sels), CLK_SET_RATE_PARENT); - clks[IMX6SX_PLL3_BYPASS] = imx_clk_mux_flags("pll3_bypass", base + 0x10, 16, 1, pll3_bypass_sels, ARRAY_SIZE(pll3_bypass_sels), CLK_SET_RATE_PARENT); - clks[IMX6SX_PLL4_BYPASS] = imx_clk_mux_flags("pll4_bypass", base + 0x70, 16, 1, pll4_bypass_sels, ARRAY_SIZE(pll4_bypass_sels), CLK_SET_RATE_PARENT); - clks[IMX6SX_PLL5_BYPASS] = imx_clk_mux_flags("pll5_bypass", base + 0xa0, 16, 1, pll5_bypass_sels, ARRAY_SIZE(pll5_bypass_sels), CLK_SET_RATE_PARENT); - clks[IMX6SX_PLL6_BYPASS] = imx_clk_mux_flags("pll6_bypass", base + 0xe0, 16, 1, pll6_bypass_sels, ARRAY_SIZE(pll6_bypass_sels), CLK_SET_RATE_PARENT); - clks[IMX6SX_PLL7_BYPASS] = imx_clk_mux_flags("pll7_bypass", base + 0x20, 16, 1, pll7_bypass_sels, ARRAY_SIZE(pll7_bypass_sels), CLK_SET_RATE_PARENT); - - /* Do not bypass PLLs initially */ - clk_set_parent(clks[IMX6SX_PLL1_BYPASS], clks[IMX6SX_CLK_PLL1]); - clk_set_parent(clks[IMX6SX_PLL2_BYPASS], clks[IMX6SX_CLK_PLL2]); - clk_set_parent(clks[IMX6SX_PLL3_BYPASS], clks[IMX6SX_CLK_PLL3]); - clk_set_parent(clks[IMX6SX_PLL4_BYPASS], clks[IMX6SX_CLK_PLL4]); - clk_set_parent(clks[IMX6SX_PLL5_BYPASS], clks[IMX6SX_CLK_PLL5]); - clk_set_parent(clks[IMX6SX_PLL6_BYPASS], clks[IMX6SX_CLK_PLL6]); - clk_set_parent(clks[IMX6SX_PLL7_BYPASS], clks[IMX6SX_CLK_PLL7]); - - clks[IMX6SX_CLK_PLL1_SYS] = imx_clk_gate("pll1_sys", "pll1_bypass", base + 0x00, 13); - clks[IMX6SX_CLK_PLL2_BUS] = imx_clk_gate("pll2_bus", "pll2_bypass", base + 0x30, 13); - clks[IMX6SX_CLK_PLL3_USB_OTG] = imx_clk_gate("pll3_usb_otg", "pll3_bypass", base + 0x10, 13); - clks[IMX6SX_CLK_PLL4_AUDIO] = imx_clk_gate("pll4_audio", "pll4_bypass", base + 0x70, 13); - clks[IMX6SX_CLK_PLL5_VIDEO] = imx_clk_gate("pll5_video", "pll5_bypass", base + 0xa0, 13); - clks[IMX6SX_CLK_PLL6_ENET] = imx_clk_gate("pll6_enet", "pll6_bypass", base + 0xe0, 13); - clks[IMX6SX_CLK_PLL7_USB_HOST] = imx_clk_gate("pll7_usb_host", "pll7_bypass", base + 0x20, 13); - - /* - * Bit 20 is the reserved and read-only bit, we do this only for: - * - Do nothing for usbphy clk_enable/disable - * - Keep refcount when do usbphy clk_enable/disable, in that case, - * the clk framework may need to enable/disable usbphy's parent - */ - clks[IMX6SX_CLK_USBPHY1] = imx_clk_gate("usbphy1", "pll3_usb_otg", base + 0x10, 20); - clks[IMX6SX_CLK_USBPHY2] = imx_clk_gate("usbphy2", "pll7_usb_host", base + 0x20, 20); - - /* - * usbphy*_gate needs to be on after system boots up, and software - * never needs to control it anymore. - */ - clks[IMX6SX_CLK_USBPHY1_GATE] = imx_clk_gate("usbphy1_gate", "dummy", base + 0x10, 6); - clks[IMX6SX_CLK_USBPHY2_GATE] = imx_clk_gate("usbphy2_gate", "dummy", base + 0x20, 6); - - /* FIXME 100Mhz is used for pcie ref for all imx6 pcie, excepted imx6q */ - clks[IMX6SX_CLK_PCIE_REF] = imx_clk_fixed_factor("pcie_ref", "pll6_enet", 1, 5); - clks[IMX6SX_CLK_PCIE_REF_125M] = imx_clk_gate("pcie_ref_125m", "pcie_ref", base + 0xe0, 19); - - clks[IMX6SX_CLK_LVDS1_OUT] = imx_clk_gate_exclusive("lvds1_out", "lvds1_sel", base + 0x160, 10, BIT(12)); - clks[IMX6SX_CLK_LVDS1_IN] = imx_clk_gate_exclusive("lvds1_in", "anaclk1", base + 0x160, 12, BIT(10)); - - clks[IMX6SX_CLK_ENET_REF] = clk_register_divider_table(NULL, "enet_ref", "pll6_enet", 0, - base + 0xe0, 0, 2, 0, clk_enet_ref_table, - &imx_ccm_lock); - clks[IMX6SX_CLK_ENET2_REF] = clk_register_divider_table(NULL, "enet2_ref", "pll6_enet", 0, - base + 0xe0, 2, 2, 0, clk_enet_ref_table, - &imx_ccm_lock); - clks[IMX6SX_CLK_ENET2_REF_125M] = imx_clk_gate("enet2_ref_125m", "enet2_ref", base + 0xe0, 20); - - clks[IMX6SX_CLK_ENET_PTP_REF] = imx_clk_fixed_factor("enet_ptp_ref", "pll6_enet", 1, 20); - clks[IMX6SX_CLK_ENET_PTP] = imx_clk_gate("enet_ptp_25m", "enet_ptp_ref", base + 0xe0, 21); - - /* name parent_name reg idx */ - clks[IMX6SX_CLK_PLL2_PFD0] = imx_clk_pfd("pll2_pfd0_352m", "pll2_bus", base + 0x100, 0); - clks[IMX6SX_CLK_PLL2_PFD1] = imx_clk_pfd("pll2_pfd1_594m", "pll2_bus", base + 0x100, 1); - clks[IMX6SX_CLK_PLL2_PFD2] = imx_clk_pfd("pll2_pfd2_396m", "pll2_bus", base + 0x100, 2); - clks[IMX6SX_CLK_PLL2_PFD3] = imx_clk_pfd("pll2_pfd3_594m", "pll2_bus", base + 0x100, 3); - clks[IMX6SX_CLK_PLL3_PFD0] = imx_clk_pfd("pll3_pfd0_720m", "pll3_usb_otg", base + 0xf0, 0); - clks[IMX6SX_CLK_PLL3_PFD1] = imx_clk_pfd("pll3_pfd1_540m", "pll3_usb_otg", base + 0xf0, 1); - clks[IMX6SX_CLK_PLL3_PFD2] = imx_clk_pfd("pll3_pfd2_508m", "pll3_usb_otg", base + 0xf0, 2); - clks[IMX6SX_CLK_PLL3_PFD3] = imx_clk_pfd("pll3_pfd3_454m", "pll3_usb_otg", base + 0xf0, 3); - - /* name parent_name mult div */ - clks[IMX6SX_CLK_PLL2_198M] = imx_clk_fixed_factor("pll2_198m", "pll2_pfd2_396m", 1, 2); - clks[IMX6SX_CLK_PLL3_120M] = imx_clk_fixed_factor("pll3_120m", "pll3_usb_otg", 1, 4); - clks[IMX6SX_CLK_PLL3_80M] = imx_clk_fixed_factor("pll3_80m", "pll3_usb_otg", 1, 6); - clks[IMX6SX_CLK_PLL3_60M] = imx_clk_fixed_factor("pll3_60m", "pll3_usb_otg", 1, 8); - clks[IMX6SX_CLK_TWD] = imx_clk_fixed_factor("twd", "arm", 1, 2); - clks[IMX6SX_CLK_GPT_3M] = imx_clk_fixed_factor("gpt_3m", "osc", 1, 8); - - clks[IMX6SX_CLK_PLL4_POST_DIV] = clk_register_divider_table(NULL, "pll4_post_div", "pll4_audio", - CLK_SET_RATE_PARENT, base + 0x70, 19, 2, 0, post_div_table, &imx_ccm_lock); - clks[IMX6SX_CLK_PLL4_AUDIO_DIV] = clk_register_divider(NULL, "pll4_audio_div", "pll4_post_div", - CLK_SET_RATE_PARENT, base + 0x170, 15, 1, 0, &imx_ccm_lock); - clks[IMX6SX_CLK_PLL5_POST_DIV] = clk_register_divider_table(NULL, "pll5_post_div", "pll5_video", - CLK_SET_RATE_PARENT, base + 0xa0, 19, 2, 0, post_div_table, &imx_ccm_lock); - clks[IMX6SX_CLK_PLL5_VIDEO_DIV] = clk_register_divider_table(NULL, "pll5_video_div", "pll5_post_div", - CLK_SET_RATE_PARENT, base + 0x170, 30, 2, 0, video_div_table, &imx_ccm_lock); - - /* name reg shift width parent_names num_parents */ - clks[IMX6SX_CLK_LVDS1_SEL] = imx_clk_mux("lvds1_sel", base + 0x160, 0, 5, lvds_sels, ARRAY_SIZE(lvds_sels)); - - np = ccm_node; - base = of_iomap(np, 0); - WARN_ON(!base); - - imx6q_pm_set_ccm_base(base); - - /* name reg shift width parent_names num_parents */ - clks[IMX6SX_CLK_STEP] = imx_clk_mux("step", base + 0xc, 8, 1, step_sels, ARRAY_SIZE(step_sels)); - clks[IMX6SX_CLK_PLL1_SW] = imx_clk_mux("pll1_sw", base + 0xc, 2, 1, pll1_sw_sels, ARRAY_SIZE(pll1_sw_sels)); - clks[IMX6SX_CLK_OCRAM_SEL] = imx_clk_mux("ocram_sel", base + 0x14, 6, 2, ocram_sels, ARRAY_SIZE(ocram_sels)); - clks[IMX6SX_CLK_PERIPH_PRE] = imx_clk_mux("periph_pre", base + 0x18, 18, 2, periph_pre_sels, ARRAY_SIZE(periph_pre_sels)); - clks[IMX6SX_CLK_PERIPH2_PRE] = imx_clk_mux("periph2_pre", base + 0x18, 21, 2, periph2_pre_sels, ARRAY_SIZE(periph2_pre_sels)); - clks[IMX6SX_CLK_PERIPH_CLK2_SEL] = imx_clk_mux("periph_clk2_sel", base + 0x18, 12, 2, periph_clk2_sels, ARRAY_SIZE(periph_clk2_sels)); - clks[IMX6SX_CLK_PERIPH2_CLK2_SEL] = imx_clk_mux("periph2_clk2_sel", base + 0x18, 20, 1, periph2_clk2_sels, ARRAY_SIZE(periph2_clk2_sels)); - clks[IMX6SX_CLK_PCIE_AXI_SEL] = imx_clk_mux("pcie_axi_sel", base + 0x18, 10, 1, pcie_axi_sels, ARRAY_SIZE(pcie_axi_sels)); - clks[IMX6SX_CLK_GPU_AXI_SEL] = imx_clk_mux("gpu_axi_sel", base + 0x18, 8, 2, gpu_axi_sels, ARRAY_SIZE(gpu_axi_sels)); - clks[IMX6SX_CLK_GPU_CORE_SEL] = imx_clk_mux("gpu_core_sel", base + 0x18, 4, 2, gpu_core_sels, ARRAY_SIZE(gpu_core_sels)); - clks[IMX6SX_CLK_EIM_SLOW_SEL] = imx_clk_mux("eim_slow_sel", base + 0x1c, 29, 2, eim_slow_sels, ARRAY_SIZE(eim_slow_sels)); - clks[IMX6SX_CLK_USDHC1_SEL] = imx_clk_mux("usdhc1_sel", base + 0x1c, 16, 1, usdhc_sels, ARRAY_SIZE(usdhc_sels)); - clks[IMX6SX_CLK_USDHC2_SEL] = imx_clk_mux("usdhc2_sel", base + 0x1c, 17, 1, usdhc_sels, ARRAY_SIZE(usdhc_sels)); - clks[IMX6SX_CLK_USDHC3_SEL] = imx_clk_mux("usdhc3_sel", base + 0x1c, 18, 1, usdhc_sels, ARRAY_SIZE(usdhc_sels)); - clks[IMX6SX_CLK_USDHC4_SEL] = imx_clk_mux("usdhc4_sel", base + 0x1c, 19, 1, usdhc_sels, ARRAY_SIZE(usdhc_sels)); - clks[IMX6SX_CLK_SSI3_SEL] = imx_clk_mux("ssi3_sel", base + 0x1c, 14, 2, ssi_sels, ARRAY_SIZE(ssi_sels)); - clks[IMX6SX_CLK_SSI2_SEL] = imx_clk_mux("ssi2_sel", base + 0x1c, 12, 2, ssi_sels, ARRAY_SIZE(ssi_sels)); - clks[IMX6SX_CLK_SSI1_SEL] = imx_clk_mux("ssi1_sel", base + 0x1c, 10, 2, ssi_sels, ARRAY_SIZE(ssi_sels)); - clks[IMX6SX_CLK_QSPI1_SEL] = imx_clk_mux_flags("qspi1_sel", base + 0x1c, 7, 3, qspi1_sels, ARRAY_SIZE(qspi1_sels), CLK_SET_RATE_PARENT); - clks[IMX6SX_CLK_PERCLK_SEL] = imx_clk_mux("perclk_sel", base + 0x1c, 6, 1, perclk_sels, ARRAY_SIZE(perclk_sels)); - clks[IMX6SX_CLK_VID_SEL] = imx_clk_mux("vid_sel", base + 0x20, 21, 3, vid_sels, ARRAY_SIZE(vid_sels)); - clks[IMX6SX_CLK_ESAI_SEL] = imx_clk_mux("esai_sel", base + 0x20, 19, 2, audio_sels, ARRAY_SIZE(audio_sels)); - clks[IMX6SX_CLK_CAN_SEL] = imx_clk_mux("can_sel", base + 0x20, 8, 2, can_sels, ARRAY_SIZE(can_sels)); - clks[IMX6SX_CLK_UART_SEL] = imx_clk_mux("uart_sel", base + 0x24, 6, 1, uart_sels, ARRAY_SIZE(uart_sels)); - clks[IMX6SX_CLK_QSPI2_SEL] = imx_clk_mux_flags("qspi2_sel", base + 0x2c, 15, 3, qspi2_sels, ARRAY_SIZE(qspi2_sels), CLK_SET_RATE_PARENT); - clks[IMX6SX_CLK_SPDIF_SEL] = imx_clk_mux("spdif_sel", base + 0x30, 20, 2, audio_sels, ARRAY_SIZE(audio_sels)); - clks[IMX6SX_CLK_AUDIO_SEL] = imx_clk_mux("audio_sel", base + 0x30, 7, 2, audio_sels, ARRAY_SIZE(audio_sels)); - clks[IMX6SX_CLK_ENET_PRE_SEL] = imx_clk_mux("enet_pre_sel", base + 0x34, 15, 3, enet_pre_sels, ARRAY_SIZE(enet_pre_sels)); - clks[IMX6SX_CLK_ENET_SEL] = imx_clk_mux("enet_sel", base + 0x34, 9, 3, enet_sels, ARRAY_SIZE(enet_sels)); - clks[IMX6SX_CLK_M4_PRE_SEL] = imx_clk_mux("m4_pre_sel", base + 0x34, 6, 3, m4_pre_sels, ARRAY_SIZE(m4_pre_sels)); - clks[IMX6SX_CLK_M4_SEL] = imx_clk_mux("m4_sel", base + 0x34, 0, 3, m4_sels, ARRAY_SIZE(m4_sels)); - clks[IMX6SX_CLK_ECSPI_SEL] = imx_clk_mux("ecspi_sel", base + 0x38, 18, 1, ecspi_sels, ARRAY_SIZE(ecspi_sels)); - clks[IMX6SX_CLK_LCDIF2_PRE_SEL] = imx_clk_mux("lcdif2_pre_sel", base + 0x38, 6, 3, lcdif2_pre_sels, ARRAY_SIZE(lcdif2_pre_sels)); - clks[IMX6SX_CLK_LCDIF2_SEL] = imx_clk_mux("lcdif2_sel", base + 0x38, 0, 3, lcdif2_sels, ARRAY_SIZE(lcdif2_sels)); - clks[IMX6SX_CLK_DISPLAY_SEL] = imx_clk_mux("display_sel", base + 0x3c, 14, 2, display_sels, ARRAY_SIZE(display_sels)); - clks[IMX6SX_CLK_CSI_SEL] = imx_clk_mux("csi_sel", base + 0x3c, 9, 2, csi_sels, ARRAY_SIZE(csi_sels)); - clks[IMX6SX_CLK_CKO1_SEL] = imx_clk_mux("cko1_sel", base + 0x60, 0, 4, cko1_sels, ARRAY_SIZE(cko1_sels)); - clks[IMX6SX_CLK_CKO2_SEL] = imx_clk_mux("cko2_sel", base + 0x60, 16, 5, cko2_sels, ARRAY_SIZE(cko2_sels)); - clks[IMX6SX_CLK_CKO] = imx_clk_mux("cko", base + 0x60, 8, 1, cko_sels, ARRAY_SIZE(cko_sels)); - - clks[IMX6SX_CLK_LDB_DI1_DIV_SEL] = imx_clk_mux_flags("ldb_di1_div_sel", base + 0x20, 11, 1, ldb_di1_div_sels, ARRAY_SIZE(ldb_di1_div_sels), CLK_SET_RATE_PARENT); - clks[IMX6SX_CLK_LDB_DI0_DIV_SEL] = imx_clk_mux_flags("ldb_di0_div_sel", base + 0x20, 10, 1, ldb_di0_div_sels, ARRAY_SIZE(ldb_di0_div_sels), CLK_SET_RATE_PARENT); - clks[IMX6SX_CLK_LDB_DI1_SEL] = imx_clk_mux_flags("ldb_di1_sel", base + 0x2c, 12, 3, ldb_di1_sels, ARRAY_SIZE(ldb_di1_sels), CLK_SET_RATE_PARENT); - clks[IMX6SX_CLK_LDB_DI0_SEL] = imx_clk_mux_flags("ldb_di0_sel", base + 0x2c, 9, 3, ldb_di0_sels, ARRAY_SIZE(ldb_di0_sels), CLK_SET_RATE_PARENT); - clks[IMX6SX_CLK_LCDIF1_PRE_SEL] = imx_clk_mux_flags("lcdif1_pre_sel", base + 0x38, 15, 3, lcdif1_pre_sels, ARRAY_SIZE(lcdif1_pre_sels), CLK_SET_RATE_PARENT); - clks[IMX6SX_CLK_LCDIF1_SEL] = imx_clk_mux_flags("lcdif1_sel", base + 0x38, 9, 3, lcdif1_sels, ARRAY_SIZE(lcdif1_sels), CLK_SET_RATE_PARENT); - - /* name parent_name reg shift width */ - clks[IMX6SX_CLK_PERIPH_CLK2] = imx_clk_divider("periph_clk2", "periph_clk2_sel", base + 0x14, 27, 3); - clks[IMX6SX_CLK_PERIPH2_CLK2] = imx_clk_divider("periph2_clk2", "periph2_clk2_sel", base + 0x14, 0, 3); - clks[IMX6SX_CLK_IPG] = imx_clk_divider("ipg", "ahb", base + 0x14, 8, 2); - clks[IMX6SX_CLK_GPU_CORE_PODF] = imx_clk_divider("gpu_core_podf", "gpu_core_sel", base + 0x18, 29, 3); - clks[IMX6SX_CLK_GPU_AXI_PODF] = imx_clk_divider("gpu_axi_podf", "gpu_axi_sel", base + 0x18, 26, 3); - clks[IMX6SX_CLK_LCDIF1_PODF] = imx_clk_divider("lcdif1_podf", "lcdif1_pred", base + 0x18, 23, 3); - clks[IMX6SX_CLK_QSPI1_PODF] = imx_clk_divider("qspi1_podf", "qspi1_sel", base + 0x1c, 26, 3); - clks[IMX6SX_CLK_EIM_SLOW_PODF] = imx_clk_divider("eim_slow_podf", "eim_slow_sel", base + 0x1c, 23, 3); - clks[IMX6SX_CLK_LCDIF2_PODF] = imx_clk_divider("lcdif2_podf", "lcdif2_pred", base + 0x1c, 20, 3); - clks[IMX6SX_CLK_PERCLK] = imx_clk_divider("perclk", "perclk_sel", base + 0x1c, 0, 6); - clks[IMX6SX_CLK_VID_PODF] = imx_clk_divider("vid_podf", "vid_sel", base + 0x20, 24, 2); - clks[IMX6SX_CLK_CAN_PODF] = imx_clk_divider("can_podf", "can_sel", base + 0x20, 2, 6); - clks[IMX6SX_CLK_USDHC4_PODF] = imx_clk_divider("usdhc4_podf", "usdhc4_sel", base + 0x24, 22, 3); - clks[IMX6SX_CLK_USDHC3_PODF] = imx_clk_divider("usdhc3_podf", "usdhc3_sel", base + 0x24, 19, 3); - clks[IMX6SX_CLK_USDHC2_PODF] = imx_clk_divider("usdhc2_podf", "usdhc2_sel", base + 0x24, 16, 3); - clks[IMX6SX_CLK_USDHC1_PODF] = imx_clk_divider("usdhc1_podf", "usdhc1_sel", base + 0x24, 11, 3); - clks[IMX6SX_CLK_UART_PODF] = imx_clk_divider("uart_podf", "uart_sel", base + 0x24, 0, 6); - clks[IMX6SX_CLK_ESAI_PRED] = imx_clk_divider("esai_pred", "esai_sel", base + 0x28, 9, 3); - clks[IMX6SX_CLK_ESAI_PODF] = imx_clk_divider("esai_podf", "esai_pred", base + 0x28, 25, 3); - clks[IMX6SX_CLK_SSI3_PRED] = imx_clk_divider("ssi3_pred", "ssi3_sel", base + 0x28, 22, 3); - clks[IMX6SX_CLK_SSI3_PODF] = imx_clk_divider("ssi3_podf", "ssi3_pred", base + 0x28, 16, 6); - clks[IMX6SX_CLK_SSI1_PRED] = imx_clk_divider("ssi1_pred", "ssi1_sel", base + 0x28, 6, 3); - clks[IMX6SX_CLK_SSI1_PODF] = imx_clk_divider("ssi1_podf", "ssi1_pred", base + 0x28, 0, 6); - clks[IMX6SX_CLK_QSPI2_PRED] = imx_clk_divider("qspi2_pred", "qspi2_sel", base + 0x2c, 18, 3); - clks[IMX6SX_CLK_QSPI2_PODF] = imx_clk_divider("qspi2_podf", "qspi2_pred", base + 0x2c, 21, 6); - clks[IMX6SX_CLK_SSI2_PRED] = imx_clk_divider("ssi2_pred", "ssi2_sel", base + 0x2c, 6, 3); - clks[IMX6SX_CLK_SSI2_PODF] = imx_clk_divider("ssi2_podf", "ssi2_pred", base + 0x2c, 0, 6); - clks[IMX6SX_CLK_SPDIF_PRED] = imx_clk_divider("spdif_pred", "spdif_sel", base + 0x30, 25, 3); - clks[IMX6SX_CLK_SPDIF_PODF] = imx_clk_divider("spdif_podf", "spdif_pred", base + 0x30, 22, 3); - clks[IMX6SX_CLK_AUDIO_PRED] = imx_clk_divider("audio_pred", "audio_sel", base + 0x30, 12, 3); - clks[IMX6SX_CLK_AUDIO_PODF] = imx_clk_divider("audio_podf", "audio_pred", base + 0x30, 9, 3); - clks[IMX6SX_CLK_ENET_PODF] = imx_clk_divider("enet_podf", "enet_pre_sel", base + 0x34, 12, 3); - clks[IMX6SX_CLK_M4_PODF] = imx_clk_divider("m4_podf", "m4_sel", base + 0x34, 3, 3); - clks[IMX6SX_CLK_ECSPI_PODF] = imx_clk_divider("ecspi_podf", "ecspi_sel", base + 0x38, 19, 6); - clks[IMX6SX_CLK_LCDIF1_PRED] = imx_clk_divider("lcdif1_pred", "lcdif1_pre_sel", base + 0x38, 12, 3); - clks[IMX6SX_CLK_LCDIF2_PRED] = imx_clk_divider("lcdif2_pred", "lcdif2_pre_sel", base + 0x38, 3, 3); - clks[IMX6SX_CLK_DISPLAY_PODF] = imx_clk_divider("display_podf", "display_sel", base + 0x3c, 16, 3); - clks[IMX6SX_CLK_CSI_PODF] = imx_clk_divider("csi_podf", "csi_sel", base + 0x3c, 11, 3); - clks[IMX6SX_CLK_CKO1_PODF] = imx_clk_divider("cko1_podf", "cko1_sel", base + 0x60, 4, 3); - clks[IMX6SX_CLK_CKO2_PODF] = imx_clk_divider("cko2_podf", "cko2_sel", base + 0x60, 21, 3); - - clks[IMX6SX_CLK_LDB_DI0_DIV_3_5] = imx_clk_fixed_factor("ldb_di0_div_3_5", "ldb_di0_sel", 2, 7); - clks[IMX6SX_CLK_LDB_DI0_DIV_7] = imx_clk_fixed_factor("ldb_di0_div_7", "ldb_di0_sel", 1, 7); - clks[IMX6SX_CLK_LDB_DI1_DIV_3_5] = imx_clk_fixed_factor("ldb_di1_div_3_5", "ldb_di1_sel", 2, 7); - clks[IMX6SX_CLK_LDB_DI1_DIV_7] = imx_clk_fixed_factor("ldb_di1_div_7", "ldb_di1_sel", 1, 7); - - /* name reg shift width busy: reg, shift parent_names num_parents */ - clks[IMX6SX_CLK_PERIPH] = imx_clk_busy_mux("periph", base + 0x14, 25, 1, base + 0x48, 5, periph_sels, ARRAY_SIZE(periph_sels)); - clks[IMX6SX_CLK_PERIPH2] = imx_clk_busy_mux("periph2", base + 0x14, 26, 1, base + 0x48, 3, periph2_sels, ARRAY_SIZE(periph2_sels)); - /* name parent_name reg shift width busy: reg, shift */ - clks[IMX6SX_CLK_OCRAM_PODF] = imx_clk_busy_divider("ocram_podf", "ocram_sel", base + 0x14, 16, 3, base + 0x48, 0); - clks[IMX6SX_CLK_AHB] = imx_clk_busy_divider("ahb", "periph", base + 0x14, 10, 3, base + 0x48, 1); - clks[IMX6SX_CLK_MMDC_PODF] = imx_clk_busy_divider("mmdc_podf", "periph2", base + 0x14, 3, 3, base + 0x48, 2); - clks[IMX6SX_CLK_ARM] = imx_clk_busy_divider("arm", "pll1_sw", base + 0x10, 0, 3, base + 0x48, 16); - - /* name parent_name reg shift */ - /* CCGR0 */ - clks[IMX6SX_CLK_AIPS_TZ1] = imx_clk_gate2("aips_tz1", "ahb", base + 0x68, 0); - clks[IMX6SX_CLK_AIPS_TZ2] = imx_clk_gate2("aips_tz2", "ahb", base + 0x68, 2); - clks[IMX6SX_CLK_APBH_DMA] = imx_clk_gate2("apbh_dma", "usdhc3", base + 0x68, 4); - clks[IMX6SX_CLK_ASRC_MEM] = imx_clk_gate2_shared("asrc_mem", "ahb", base + 0x68, 6, &share_count_asrc); - clks[IMX6SX_CLK_ASRC_IPG] = imx_clk_gate2_shared("asrc_ipg", "ahb", base + 0x68, 6, &share_count_asrc); - clks[IMX6SX_CLK_CAAM_MEM] = imx_clk_gate2("caam_mem", "ahb", base + 0x68, 8); - clks[IMX6SX_CLK_CAAM_ACLK] = imx_clk_gate2("caam_aclk", "ahb", base + 0x68, 10); - clks[IMX6SX_CLK_CAAM_IPG] = imx_clk_gate2("caam_ipg", "ipg", base + 0x68, 12); - clks[IMX6SX_CLK_CAN1_IPG] = imx_clk_gate2("can1_ipg", "ipg", base + 0x68, 14); - clks[IMX6SX_CLK_CAN1_SERIAL] = imx_clk_gate2("can1_serial", "can_podf", base + 0x68, 16); - clks[IMX6SX_CLK_CAN2_IPG] = imx_clk_gate2("can2_ipg", "ipg", base + 0x68, 18); - clks[IMX6SX_CLK_CAN2_SERIAL] = imx_clk_gate2("can2_serial", "can_podf", base + 0x68, 20); - clks[IMX6SX_CLK_DCIC1] = imx_clk_gate2("dcic1", "display_podf", base + 0x68, 24); - clks[IMX6SX_CLK_DCIC2] = imx_clk_gate2("dcic2", "display_podf", base + 0x68, 26); - clks[IMX6SX_CLK_AIPS_TZ3] = imx_clk_gate2("aips_tz3", "ahb", base + 0x68, 30); - - /* CCGR1 */ - clks[IMX6SX_CLK_ECSPI1] = imx_clk_gate2("ecspi1", "ecspi_podf", base + 0x6c, 0); - clks[IMX6SX_CLK_ECSPI2] = imx_clk_gate2("ecspi2", "ecspi_podf", base + 0x6c, 2); - clks[IMX6SX_CLK_ECSPI3] = imx_clk_gate2("ecspi3", "ecspi_podf", base + 0x6c, 4); - clks[IMX6SX_CLK_ECSPI4] = imx_clk_gate2("ecspi4", "ecspi_podf", base + 0x6c, 6); - clks[IMX6SX_CLK_ECSPI5] = imx_clk_gate2("ecspi5", "ecspi_podf", base + 0x6c, 8); - clks[IMX6SX_CLK_EPIT1] = imx_clk_gate2("epit1", "perclk", base + 0x6c, 12); - clks[IMX6SX_CLK_EPIT2] = imx_clk_gate2("epit2", "perclk", base + 0x6c, 14); - clks[IMX6SX_CLK_ESAI_EXTAL] = imx_clk_gate2_shared("esai_extal", "esai_podf", base + 0x6c, 16, &share_count_esai); - clks[IMX6SX_CLK_ESAI_IPG] = imx_clk_gate2_shared("esai_ipg", "ahb", base + 0x6c, 16, &share_count_esai); - clks[IMX6SX_CLK_ESAI_MEM] = imx_clk_gate2_shared("esai_mem", "ahb", base + 0x6c, 16, &share_count_esai); - clks[IMX6SX_CLK_WAKEUP] = imx_clk_gate2("wakeup", "ipg", base + 0x6c, 18); - clks[IMX6SX_CLK_GPT_BUS] = imx_clk_gate2("gpt_bus", "perclk", base + 0x6c, 20); - clks[IMX6SX_CLK_GPT_SERIAL] = imx_clk_gate2("gpt_serial", "perclk", base + 0x6c, 22); - clks[IMX6SX_CLK_GPU] = imx_clk_gate2("gpu", "gpu_core_podf", base + 0x6c, 26); - clks[IMX6SX_CLK_CANFD] = imx_clk_gate2("canfd", "can_podf", base + 0x6c, 30); - - /* CCGR2 */ - clks[IMX6SX_CLK_CSI] = imx_clk_gate2("csi", "csi_podf", base + 0x70, 2); - clks[IMX6SX_CLK_I2C1] = imx_clk_gate2("i2c1", "perclk", base + 0x70, 6); - clks[IMX6SX_CLK_I2C2] = imx_clk_gate2("i2c2", "perclk", base + 0x70, 8); - clks[IMX6SX_CLK_I2C3] = imx_clk_gate2("i2c3", "perclk", base + 0x70, 10); - clks[IMX6SX_CLK_OCOTP] = imx_clk_gate2("ocotp", "ipg", base + 0x70, 12); - clks[IMX6SX_CLK_IOMUXC] = imx_clk_gate2("iomuxc", "lcdif1_podf", base + 0x70, 14); - clks[IMX6SX_CLK_IPMUX1] = imx_clk_gate2("ipmux1", "ahb", base + 0x70, 16); - clks[IMX6SX_CLK_IPMUX2] = imx_clk_gate2("ipmux2", "ahb", base + 0x70, 18); - clks[IMX6SX_CLK_IPMUX3] = imx_clk_gate2("ipmux3", "ahb", base + 0x70, 20); - clks[IMX6SX_CLK_TZASC1] = imx_clk_gate2("tzasc1", "mmdc_podf", base + 0x70, 22); - clks[IMX6SX_CLK_LCDIF_APB] = imx_clk_gate2("lcdif_apb", "display_podf", base + 0x70, 28); - clks[IMX6SX_CLK_PXP_AXI] = imx_clk_gate2("pxp_axi", "display_podf", base + 0x70, 30); - - /* CCGR3 */ - clks[IMX6SX_CLK_M4] = imx_clk_gate2("m4", "m4_podf", base + 0x74, 2); - clks[IMX6SX_CLK_ENET] = imx_clk_gate2("enet", "ipg", base + 0x74, 4); - clks[IMX6SX_CLK_ENET_AHB] = imx_clk_gate2("enet_ahb", "enet_sel", base + 0x74, 4); - clks[IMX6SX_CLK_DISPLAY_AXI] = imx_clk_gate2("display_axi", "display_podf", base + 0x74, 6); - clks[IMX6SX_CLK_LCDIF2_PIX] = imx_clk_gate2("lcdif2_pix", "lcdif2_sel", base + 0x74, 8); - clks[IMX6SX_CLK_LCDIF1_PIX] = imx_clk_gate2("lcdif1_pix", "lcdif1_sel", base + 0x74, 10); - clks[IMX6SX_CLK_LDB_DI0] = imx_clk_gate2("ldb_di0", "ldb_di0_div_sel", base + 0x74, 12); - clks[IMX6SX_CLK_QSPI1] = imx_clk_gate2("qspi1", "qspi1_podf", base + 0x74, 14); - clks[IMX6SX_CLK_MLB] = imx_clk_gate2("mlb", "ahb", base + 0x74, 18); - clks[IMX6SX_CLK_MMDC_P0_FAST] = imx_clk_gate2("mmdc_p0_fast", "mmdc_podf", base + 0x74, 20); - clks[IMX6SX_CLK_MMDC_P0_IPG] = imx_clk_gate2("mmdc_p0_ipg", "ipg", base + 0x74, 24); - clks[IMX6SX_CLK_OCRAM] = imx_clk_gate2("ocram", "ocram_podf", base + 0x74, 28); - - /* CCGR4 */ - clks[IMX6SX_CLK_PCIE_AXI] = imx_clk_gate2("pcie_axi", "display_podf", base + 0x78, 0); - clks[IMX6SX_CLK_QSPI2] = imx_clk_gate2("qspi2", "qspi2_podf", base + 0x78, 10); - clks[IMX6SX_CLK_PER1_BCH] = imx_clk_gate2("per1_bch", "usdhc3", base + 0x78, 12); - clks[IMX6SX_CLK_PER2_MAIN] = imx_clk_gate2("per2_main", "ahb", base + 0x78, 14); - clks[IMX6SX_CLK_PWM1] = imx_clk_gate2("pwm1", "perclk", base + 0x78, 16); - clks[IMX6SX_CLK_PWM2] = imx_clk_gate2("pwm2", "perclk", base + 0x78, 18); - clks[IMX6SX_CLK_PWM3] = imx_clk_gate2("pwm3", "perclk", base + 0x78, 20); - clks[IMX6SX_CLK_PWM4] = imx_clk_gate2("pwm4", "perclk", base + 0x78, 22); - clks[IMX6SX_CLK_GPMI_BCH_APB] = imx_clk_gate2("gpmi_bch_apb", "usdhc3", base + 0x78, 24); - clks[IMX6SX_CLK_GPMI_BCH] = imx_clk_gate2("gpmi_bch", "usdhc4", base + 0x78, 26); - clks[IMX6SX_CLK_GPMI_IO] = imx_clk_gate2("gpmi_io", "qspi2_podf", base + 0x78, 28); - clks[IMX6SX_CLK_GPMI_APB] = imx_clk_gate2("gpmi_apb", "usdhc3", base + 0x78, 30); - - /* CCGR5 */ - clks[IMX6SX_CLK_ROM] = imx_clk_gate2("rom", "ahb", base + 0x7c, 0); - clks[IMX6SX_CLK_SDMA] = imx_clk_gate2("sdma", "ahb", base + 0x7c, 6); - clks[IMX6SX_CLK_SPBA] = imx_clk_gate2("spba", "ipg", base + 0x7c, 12); - clks[IMX6SX_CLK_AUDIO] = imx_clk_gate2_shared("audio", "audio_podf", base + 0x7c, 14, &share_count_audio); - clks[IMX6SX_CLK_SPDIF] = imx_clk_gate2_shared("spdif", "spdif_podf", base + 0x7c, 14, &share_count_audio); - clks[IMX6SX_CLK_SSI1_IPG] = imx_clk_gate2_shared("ssi1_ipg", "ipg", base + 0x7c, 18, &share_count_ssi1); - clks[IMX6SX_CLK_SSI2_IPG] = imx_clk_gate2_shared("ssi2_ipg", "ipg", base + 0x7c, 20, &share_count_ssi2); - clks[IMX6SX_CLK_SSI3_IPG] = imx_clk_gate2_shared("ssi3_ipg", "ipg", base + 0x7c, 22, &share_count_ssi3); - clks[IMX6SX_CLK_SSI1] = imx_clk_gate2_shared("ssi1", "ssi1_podf", base + 0x7c, 18, &share_count_ssi1); - clks[IMX6SX_CLK_SSI2] = imx_clk_gate2_shared("ssi2", "ssi2_podf", base + 0x7c, 20, &share_count_ssi2); - clks[IMX6SX_CLK_SSI3] = imx_clk_gate2_shared("ssi3", "ssi3_podf", base + 0x7c, 22, &share_count_ssi3); - clks[IMX6SX_CLK_UART_IPG] = imx_clk_gate2("uart_ipg", "ipg", base + 0x7c, 24); - clks[IMX6SX_CLK_UART_SERIAL] = imx_clk_gate2("uart_serial", "uart_podf", base + 0x7c, 26); - clks[IMX6SX_CLK_SAI1_IPG] = imx_clk_gate2("sai1_ipg", "ipg", base + 0x7c, 28); - clks[IMX6SX_CLK_SAI2_IPG] = imx_clk_gate2("sai2_ipg", "ipg", base + 0x7c, 30); - clks[IMX6SX_CLK_SAI1] = imx_clk_gate2("sai1", "ssi1_podf", base + 0x7c, 28); - clks[IMX6SX_CLK_SAI2] = imx_clk_gate2("sai2", "ssi2_podf", base + 0x7c, 30); - - /* CCGR6 */ - clks[IMX6SX_CLK_USBOH3] = imx_clk_gate2("usboh3", "ipg", base + 0x80, 0); - clks[IMX6SX_CLK_USDHC1] = imx_clk_gate2("usdhc1", "usdhc1_podf", base + 0x80, 2); - clks[IMX6SX_CLK_USDHC2] = imx_clk_gate2("usdhc2", "usdhc2_podf", base + 0x80, 4); - clks[IMX6SX_CLK_USDHC3] = imx_clk_gate2("usdhc3", "usdhc3_podf", base + 0x80, 6); - clks[IMX6SX_CLK_USDHC4] = imx_clk_gate2("usdhc4", "usdhc4_podf", base + 0x80, 8); - clks[IMX6SX_CLK_EIM_SLOW] = imx_clk_gate2("eim_slow", "eim_slow_podf", base + 0x80, 10); - clks[IMX6SX_CLK_PWM8] = imx_clk_gate2("pwm8", "perclk", base + 0x80, 16); - clks[IMX6SX_CLK_VADC] = imx_clk_gate2("vadc", "vid_podf", base + 0x80, 20); - clks[IMX6SX_CLK_GIS] = imx_clk_gate2("gis", "display_podf", base + 0x80, 22); - clks[IMX6SX_CLK_I2C4] = imx_clk_gate2("i2c4", "perclk", base + 0x80, 24); - clks[IMX6SX_CLK_PWM5] = imx_clk_gate2("pwm5", "perclk", base + 0x80, 26); - clks[IMX6SX_CLK_PWM6] = imx_clk_gate2("pwm6", "perclk", base + 0x80, 28); - clks[IMX6SX_CLK_PWM7] = imx_clk_gate2("pwm7", "perclk", base + 0x80, 30); - - clks[IMX6SX_CLK_CKO1] = imx_clk_gate("cko1", "cko1_podf", base + 0x60, 7); - clks[IMX6SX_CLK_CKO2] = imx_clk_gate("cko2", "cko2_podf", base + 0x60, 24); - - /* mask handshake of mmdc */ - writel_relaxed(BM_CCM_CCDR_MMDC_CH0_MASK, base + CCDR); - - imx_check_clocks(clks, ARRAY_SIZE(clks)); - - clk_data.clks = clks; - clk_data.clk_num = ARRAY_SIZE(clks); - of_clk_add_provider(np, of_clk_src_onecell_get, &clk_data); - - for (i = 0; i < ARRAY_SIZE(clks_init_on); i++) - clk_prepare_enable(clks[clks_init_on[i]]); - - if (IS_ENABLED(CONFIG_USB_MXS_PHY)) { - clk_prepare_enable(clks[IMX6SX_CLK_USBPHY1_GATE]); - clk_prepare_enable(clks[IMX6SX_CLK_USBPHY2_GATE]); - } - - /* Set the default 132MHz for EIM module */ - clk_set_parent(clks[IMX6SX_CLK_EIM_SLOW_SEL], clks[IMX6SX_CLK_PLL2_PFD2]); - clk_set_rate(clks[IMX6SX_CLK_EIM_SLOW], 132000000); - - /* set parent clock for LCDIF1 pixel clock */ - clk_set_parent(clks[IMX6SX_CLK_LCDIF1_PRE_SEL], clks[IMX6SX_CLK_PLL5_VIDEO_DIV]); - clk_set_parent(clks[IMX6SX_CLK_LCDIF1_SEL], clks[IMX6SX_CLK_LCDIF1_PODF]); - - /* Set the parent clks of PCIe lvds1 and pcie_axi to be pcie ref, axi */ - if (clk_set_parent(clks[IMX6SX_CLK_LVDS1_SEL], clks[IMX6SX_CLK_PCIE_REF_125M])) - pr_err("Failed to set pcie bus parent clk.\n"); - if (clk_set_parent(clks[IMX6SX_CLK_PCIE_AXI_SEL], clks[IMX6SX_CLK_AXI])) - pr_err("Failed to set pcie parent clk.\n"); - - /* - * Init enet system AHB clock, set to 200Mhz - * pll2_pfd2_396m-> ENET_PODF-> ENET_AHB - */ - clk_set_parent(clks[IMX6SX_CLK_ENET_PRE_SEL], clks[IMX6SX_CLK_PLL2_PFD2]); - clk_set_parent(clks[IMX6SX_CLK_ENET_SEL], clks[IMX6SX_CLK_ENET_PODF]); - clk_set_rate(clks[IMX6SX_CLK_ENET_PODF], 200000000); - clk_set_rate(clks[IMX6SX_CLK_ENET_REF], 125000000); - clk_set_rate(clks[IMX6SX_CLK_ENET2_REF], 125000000); - - /* Audio clocks */ - clk_set_rate(clks[IMX6SX_CLK_PLL4_AUDIO_DIV], 393216000); - - clk_set_parent(clks[IMX6SX_CLK_SPDIF_SEL], clks[IMX6SX_CLK_PLL4_AUDIO_DIV]); - clk_set_rate(clks[IMX6SX_CLK_SPDIF_PODF], 98304000); - - clk_set_parent(clks[IMX6SX_CLK_AUDIO_SEL], clks[IMX6SX_CLK_PLL3_USB_OTG]); - clk_set_rate(clks[IMX6SX_CLK_AUDIO_PODF], 24000000); - - clk_set_parent(clks[IMX6SX_CLK_SSI1_SEL], clks[IMX6SX_CLK_PLL4_AUDIO_DIV]); - clk_set_parent(clks[IMX6SX_CLK_SSI2_SEL], clks[IMX6SX_CLK_PLL4_AUDIO_DIV]); - clk_set_parent(clks[IMX6SX_CLK_SSI3_SEL], clks[IMX6SX_CLK_PLL4_AUDIO_DIV]); - clk_set_rate(clks[IMX6SX_CLK_SSI1_PODF], 24576000); - clk_set_rate(clks[IMX6SX_CLK_SSI2_PODF], 24576000); - clk_set_rate(clks[IMX6SX_CLK_SSI3_PODF], 24576000); - - clk_set_parent(clks[IMX6SX_CLK_ESAI_SEL], clks[IMX6SX_CLK_PLL4_AUDIO_DIV]); - clk_set_rate(clks[IMX6SX_CLK_ESAI_PODF], 24576000); - - /* Set parent clock for vadc */ - clk_set_parent(clks[IMX6SX_CLK_VID_SEL], clks[IMX6SX_CLK_PLL3_USB_OTG]); - - /* default parent of can_sel clock is invalid, manually set it here */ - clk_set_parent(clks[IMX6SX_CLK_CAN_SEL], clks[IMX6SX_CLK_PLL3_60M]); - - /* Update gpu clock from default 528M to 720M */ - clk_set_parent(clks[IMX6SX_CLK_GPU_CORE_SEL], clks[IMX6SX_CLK_PLL3_PFD0]); - clk_set_parent(clks[IMX6SX_CLK_GPU_AXI_SEL], clks[IMX6SX_CLK_PLL3_PFD0]); - - clk_set_parent(clks[IMX6SX_CLK_QSPI1_SEL], clks[IMX6SX_CLK_PLL2_BUS]); - clk_set_parent(clks[IMX6SX_CLK_QSPI2_SEL], clks[IMX6SX_CLK_PLL2_BUS]); - - /* Set initial power mode */ - imx6q_set_lpm(WAIT_CLOCKED); -} -CLK_OF_DECLARE(imx6sx, "fsl,imx6sx-ccm", imx6sx_clocks_init); diff --git a/arch/arm/mach-imx/clk-pfd.c b/arch/arm/mach-imx/clk-pfd.c deleted file mode 100644 index 0b0f6f66e..000000000 --- a/arch/arm/mach-imx/clk-pfd.c +++ /dev/null @@ -1,158 +0,0 @@ -/* - * Copyright 2012 Freescale Semiconductor, Inc. - * Copyright 2012 Linaro Ltd. - * - * The code contained herein is licensed under the GNU General Public - * License. You may obtain a copy of the GNU General Public License - * Version 2 or later at the following locations: - * - * http://www.opensource.org/licenses/gpl-license.html - * http://www.gnu.org/copyleft/gpl.html - */ - -#include <linux/clk.h> -#include <linux/clk-provider.h> -#include <linux/io.h> -#include <linux/slab.h> -#include <linux/err.h> -#include "clk.h" - -/** - * struct clk_pfd - IMX PFD clock - * @clk_hw: clock source - * @reg: PFD register address - * @idx: the index of PFD encoded in the register - * - * PFD clock found on i.MX6 series. Each register for PFD has 4 clk_pfd - * data encoded, and member idx is used to specify the one. And each - * register has SET, CLR and TOG registers at offset 0x4 0x8 and 0xc. - */ -struct clk_pfd { - struct clk_hw hw; - void __iomem *reg; - u8 idx; -}; - -#define to_clk_pfd(_hw) container_of(_hw, struct clk_pfd, hw) - -#define SET 0x4 -#define CLR 0x8 -#define OTG 0xc - -static int clk_pfd_enable(struct clk_hw *hw) -{ - struct clk_pfd *pfd = to_clk_pfd(hw); - - writel_relaxed(1 << ((pfd->idx + 1) * 8 - 1), pfd->reg + CLR); - - return 0; -} - -static void clk_pfd_disable(struct clk_hw *hw) -{ - struct clk_pfd *pfd = to_clk_pfd(hw); - - writel_relaxed(1 << ((pfd->idx + 1) * 8 - 1), pfd->reg + SET); -} - -static unsigned long clk_pfd_recalc_rate(struct clk_hw *hw, - unsigned long parent_rate) -{ - struct clk_pfd *pfd = to_clk_pfd(hw); - u64 tmp = parent_rate; - u8 frac = (readl_relaxed(pfd->reg) >> (pfd->idx * 8)) & 0x3f; - - tmp *= 18; - do_div(tmp, frac); - - return tmp; -} - -static long clk_pfd_round_rate(struct clk_hw *hw, unsigned long rate, - unsigned long *prate) -{ - u64 tmp = *prate; - u8 frac; - - tmp = tmp * 18 + rate / 2; - do_div(tmp, rate); - frac = tmp; - if (frac < 12) - frac = 12; - else if (frac > 35) - frac = 35; - tmp = *prate; - tmp *= 18; - do_div(tmp, frac); - - return tmp; -} - -static int clk_pfd_set_rate(struct clk_hw *hw, unsigned long rate, - unsigned long parent_rate) -{ - struct clk_pfd *pfd = to_clk_pfd(hw); - u64 tmp = parent_rate; - u8 frac; - - tmp = tmp * 18 + rate / 2; - do_div(tmp, rate); - frac = tmp; - if (frac < 12) - frac = 12; - else if (frac > 35) - frac = 35; - - writel_relaxed(0x3f << (pfd->idx * 8), pfd->reg + CLR); - writel_relaxed(frac << (pfd->idx * 8), pfd->reg + SET); - - return 0; -} - -static int clk_pfd_is_enabled(struct clk_hw *hw) -{ - struct clk_pfd *pfd = to_clk_pfd(hw); - - if (readl_relaxed(pfd->reg) & (1 << ((pfd->idx + 1) * 8 - 1))) - return 0; - - return 1; -} - -static const struct clk_ops clk_pfd_ops = { - .enable = clk_pfd_enable, - .disable = clk_pfd_disable, - .recalc_rate = clk_pfd_recalc_rate, - .round_rate = clk_pfd_round_rate, - .set_rate = clk_pfd_set_rate, - .is_enabled = clk_pfd_is_enabled, -}; - -struct clk *imx_clk_pfd(const char *name, const char *parent_name, - void __iomem *reg, u8 idx) -{ - struct clk_pfd *pfd; - struct clk *clk; - struct clk_init_data init; - - pfd = kzalloc(sizeof(*pfd), GFP_KERNEL); - if (!pfd) - return ERR_PTR(-ENOMEM); - - pfd->reg = reg; - pfd->idx = idx; - - init.name = name; - init.ops = &clk_pfd_ops; - init.flags = 0; - init.parent_names = &parent_name; - init.num_parents = 1; - - pfd->hw.init = &init; - - clk = clk_register(NULL, &pfd->hw); - if (IS_ERR(clk)) - kfree(pfd); - - return clk; -} diff --git a/arch/arm/mach-imx/clk-pllv1.c b/arch/arm/mach-imx/clk-pllv1.c deleted file mode 100644 index d21d14ca4..000000000 --- a/arch/arm/mach-imx/clk-pllv1.c +++ /dev/null @@ -1,126 +0,0 @@ -#include <linux/clk.h> -#include <linux/clk-provider.h> -#include <linux/io.h> -#include <linux/slab.h> -#include <linux/kernel.h> -#include <linux/err.h> - -#include "clk.h" -#include "common.h" -#include "hardware.h" - -/** - * pll v1 - * - * @clk_hw clock source - * @parent the parent clock name - * @base base address of pll registers - * - * PLL clock version 1, found on i.MX1/21/25/27/31/35 - */ - -#define MFN_BITS (10) -#define MFN_SIGN (BIT(MFN_BITS - 1)) -#define MFN_MASK (MFN_SIGN - 1) - -struct clk_pllv1 { - struct clk_hw hw; - void __iomem *base; -}; - -#define to_clk_pllv1(clk) (container_of(clk, struct clk_pllv1, clk)) - -static inline bool mfn_is_negative(unsigned int mfn) -{ - return !cpu_is_mx1() && !cpu_is_mx21() && (mfn & MFN_SIGN); -} - -static unsigned long clk_pllv1_recalc_rate(struct clk_hw *hw, - unsigned long parent_rate) -{ - struct clk_pllv1 *pll = to_clk_pllv1(hw); - long long ll; - int mfn_abs; - unsigned int mfi, mfn, mfd, pd; - u32 reg; - unsigned long rate; - - reg = readl(pll->base); - - /* - * Get the resulting clock rate from a PLL register value and the input - * frequency. PLLs with this register layout can be found on i.MX1, - * i.MX21, i.MX27 and i,MX31 - * - * mfi + mfn / (mfd + 1) - * f = 2 * f_ref * -------------------- - * pd + 1 - */ - - mfi = (reg >> 10) & 0xf; - mfn = reg & 0x3ff; - mfd = (reg >> 16) & 0x3ff; - pd = (reg >> 26) & 0xf; - - mfi = mfi <= 5 ? 5 : mfi; - - mfn_abs = mfn; - - /* - * On all i.MXs except i.MX1 and i.MX21 mfn is a 10bit - * 2's complements number. - * On i.MX27 the bit 9 is the sign bit. - */ - if (mfn_is_negative(mfn)) { - if (cpu_is_mx27()) - mfn_abs = mfn & MFN_MASK; - else - mfn_abs = BIT(MFN_BITS) - mfn; - } - - rate = parent_rate * 2; - rate /= pd + 1; - - ll = (unsigned long long)rate * mfn_abs; - - do_div(ll, mfd + 1); - - if (mfn_is_negative(mfn)) - ll = -ll; - - ll = (rate * mfi) + ll; - - return ll; -} - -static struct clk_ops clk_pllv1_ops = { - .recalc_rate = clk_pllv1_recalc_rate, -}; - -struct clk *imx_clk_pllv1(const char *name, const char *parent, - void __iomem *base) -{ - struct clk_pllv1 *pll; - struct clk *clk; - struct clk_init_data init; - - pll = kmalloc(sizeof(*pll), GFP_KERNEL); - if (!pll) - return ERR_PTR(-ENOMEM); - - pll->base = base; - - init.name = name; - init.ops = &clk_pllv1_ops; - init.flags = 0; - init.parent_names = &parent; - init.num_parents = 1; - - pll->hw.init = &init; - - clk = clk_register(NULL, &pll->hw); - if (IS_ERR(clk)) - kfree(pll); - - return clk; -} diff --git a/arch/arm/mach-imx/clk-pllv2.c b/arch/arm/mach-imx/clk-pllv2.c deleted file mode 100644 index 20889d59b..000000000 --- a/arch/arm/mach-imx/clk-pllv2.c +++ /dev/null @@ -1,266 +0,0 @@ -#include <linux/kernel.h> -#include <linux/clk.h> -#include <linux/io.h> -#include <linux/errno.h> -#include <linux/delay.h> -#include <linux/slab.h> -#include <linux/err.h> - -#include <asm/div64.h> - -#include "clk.h" - -#define to_clk_pllv2(clk) (container_of(clk, struct clk_pllv2, clk)) - -/* PLL Register Offsets */ -#define MXC_PLL_DP_CTL 0x00 -#define MXC_PLL_DP_CONFIG 0x04 -#define MXC_PLL_DP_OP 0x08 -#define MXC_PLL_DP_MFD 0x0C -#define MXC_PLL_DP_MFN 0x10 -#define MXC_PLL_DP_MFNMINUS 0x14 -#define MXC_PLL_DP_MFNPLUS 0x18 -#define MXC_PLL_DP_HFS_OP 0x1C -#define MXC_PLL_DP_HFS_MFD 0x20 -#define MXC_PLL_DP_HFS_MFN 0x24 -#define MXC_PLL_DP_MFN_TOGC 0x28 -#define MXC_PLL_DP_DESTAT 0x2c - -/* PLL Register Bit definitions */ -#define MXC_PLL_DP_CTL_MUL_CTRL 0x2000 -#define MXC_PLL_DP_CTL_DPDCK0_2_EN 0x1000 -#define MXC_PLL_DP_CTL_DPDCK0_2_OFFSET 12 -#define MXC_PLL_DP_CTL_ADE 0x800 -#define MXC_PLL_DP_CTL_REF_CLK_DIV 0x400 -#define MXC_PLL_DP_CTL_REF_CLK_SEL_MASK (3 << 8) -#define MXC_PLL_DP_CTL_REF_CLK_SEL_OFFSET 8 -#define MXC_PLL_DP_CTL_HFSM 0x80 -#define MXC_PLL_DP_CTL_PRE 0x40 -#define MXC_PLL_DP_CTL_UPEN 0x20 -#define MXC_PLL_DP_CTL_RST 0x10 -#define MXC_PLL_DP_CTL_RCP 0x8 -#define MXC_PLL_DP_CTL_PLM 0x4 -#define MXC_PLL_DP_CTL_BRM0 0x2 -#define MXC_PLL_DP_CTL_LRF 0x1 - -#define MXC_PLL_DP_CONFIG_BIST 0x8 -#define MXC_PLL_DP_CONFIG_SJC_CE 0x4 -#define MXC_PLL_DP_CONFIG_AREN 0x2 -#define MXC_PLL_DP_CONFIG_LDREQ 0x1 - -#define MXC_PLL_DP_OP_MFI_OFFSET 4 -#define MXC_PLL_DP_OP_MFI_MASK (0xF << 4) -#define MXC_PLL_DP_OP_PDF_OFFSET 0 -#define MXC_PLL_DP_OP_PDF_MASK 0xF - -#define MXC_PLL_DP_MFD_OFFSET 0 -#define MXC_PLL_DP_MFD_MASK 0x07FFFFFF - -#define MXC_PLL_DP_MFN_OFFSET 0x0 -#define MXC_PLL_DP_MFN_MASK 0x07FFFFFF - -#define MXC_PLL_DP_MFN_TOGC_TOG_DIS (1 << 17) -#define MXC_PLL_DP_MFN_TOGC_TOG_EN (1 << 16) -#define MXC_PLL_DP_MFN_TOGC_CNT_OFFSET 0x0 -#define MXC_PLL_DP_MFN_TOGC_CNT_MASK 0xFFFF - -#define MXC_PLL_DP_DESTAT_TOG_SEL (1 << 31) -#define MXC_PLL_DP_DESTAT_MFN 0x07FFFFFF - -#define MAX_DPLL_WAIT_TRIES 1000 /* 1000 * udelay(1) = 1ms */ - -struct clk_pllv2 { - struct clk_hw hw; - void __iomem *base; -}; - -static unsigned long __clk_pllv2_recalc_rate(unsigned long parent_rate, - u32 dp_ctl, u32 dp_op, u32 dp_mfd, u32 dp_mfn) -{ - long mfi, mfn, mfd, pdf, ref_clk, mfn_abs; - unsigned long dbl; - s64 temp; - - dbl = dp_ctl & MXC_PLL_DP_CTL_DPDCK0_2_EN; - - pdf = dp_op & MXC_PLL_DP_OP_PDF_MASK; - mfi = (dp_op & MXC_PLL_DP_OP_MFI_MASK) >> MXC_PLL_DP_OP_MFI_OFFSET; - mfi = (mfi <= 5) ? 5 : mfi; - mfd = dp_mfd & MXC_PLL_DP_MFD_MASK; - mfn = mfn_abs = dp_mfn & MXC_PLL_DP_MFN_MASK; - /* Sign extend to 32-bits */ - if (mfn >= 0x04000000) { - mfn |= 0xFC000000; - mfn_abs = -mfn; - } - - ref_clk = 2 * parent_rate; - if (dbl != 0) - ref_clk *= 2; - - ref_clk /= (pdf + 1); - temp = (u64) ref_clk * mfn_abs; - do_div(temp, mfd + 1); - if (mfn < 0) - temp = -temp; - temp = (ref_clk * mfi) + temp; - - return temp; -} - -static unsigned long clk_pllv2_recalc_rate(struct clk_hw *hw, - unsigned long parent_rate) -{ - u32 dp_op, dp_mfd, dp_mfn, dp_ctl; - void __iomem *pllbase; - struct clk_pllv2 *pll = to_clk_pllv2(hw); - - pllbase = pll->base; - - dp_ctl = __raw_readl(pllbase + MXC_PLL_DP_CTL); - dp_op = __raw_readl(pllbase + MXC_PLL_DP_OP); - dp_mfd = __raw_readl(pllbase + MXC_PLL_DP_MFD); - dp_mfn = __raw_readl(pllbase + MXC_PLL_DP_MFN); - - return __clk_pllv2_recalc_rate(parent_rate, dp_ctl, dp_op, dp_mfd, dp_mfn); -} - -static int __clk_pllv2_set_rate(unsigned long rate, unsigned long parent_rate, - u32 *dp_op, u32 *dp_mfd, u32 *dp_mfn) -{ - u32 reg; - long mfi, pdf, mfn, mfd = 999999; - s64 temp64; - unsigned long quad_parent_rate; - - quad_parent_rate = 4 * parent_rate; - pdf = mfi = -1; - while (++pdf < 16 && mfi < 5) - mfi = rate * (pdf+1) / quad_parent_rate; - if (mfi > 15) - return -EINVAL; - pdf--; - - temp64 = rate * (pdf + 1) - quad_parent_rate * mfi; - do_div(temp64, quad_parent_rate / 1000000); - mfn = (long)temp64; - - reg = mfi << 4 | pdf; - - *dp_op = reg; - *dp_mfd = mfd; - *dp_mfn = mfn; - - return 0; -} - -static int clk_pllv2_set_rate(struct clk_hw *hw, unsigned long rate, - unsigned long parent_rate) -{ - struct clk_pllv2 *pll = to_clk_pllv2(hw); - void __iomem *pllbase; - u32 dp_ctl, dp_op, dp_mfd, dp_mfn; - int ret; - - pllbase = pll->base; - - - ret = __clk_pllv2_set_rate(rate, parent_rate, &dp_op, &dp_mfd, &dp_mfn); - if (ret) - return ret; - - dp_ctl = __raw_readl(pllbase + MXC_PLL_DP_CTL); - /* use dpdck0_2 */ - __raw_writel(dp_ctl | 0x1000L, pllbase + MXC_PLL_DP_CTL); - - __raw_writel(dp_op, pllbase + MXC_PLL_DP_OP); - __raw_writel(dp_mfd, pllbase + MXC_PLL_DP_MFD); - __raw_writel(dp_mfn, pllbase + MXC_PLL_DP_MFN); - - return 0; -} - -static long clk_pllv2_round_rate(struct clk_hw *hw, unsigned long rate, - unsigned long *prate) -{ - u32 dp_op, dp_mfd, dp_mfn; - - __clk_pllv2_set_rate(rate, *prate, &dp_op, &dp_mfd, &dp_mfn); - return __clk_pllv2_recalc_rate(*prate, MXC_PLL_DP_CTL_DPDCK0_2_EN, - dp_op, dp_mfd, dp_mfn); -} - -static int clk_pllv2_prepare(struct clk_hw *hw) -{ - struct clk_pllv2 *pll = to_clk_pllv2(hw); - u32 reg; - void __iomem *pllbase; - int i = 0; - - pllbase = pll->base; - reg = __raw_readl(pllbase + MXC_PLL_DP_CTL) | MXC_PLL_DP_CTL_UPEN; - __raw_writel(reg, pllbase + MXC_PLL_DP_CTL); - - /* Wait for lock */ - do { - reg = __raw_readl(pllbase + MXC_PLL_DP_CTL); - if (reg & MXC_PLL_DP_CTL_LRF) - break; - - udelay(1); - } while (++i < MAX_DPLL_WAIT_TRIES); - - if (i == MAX_DPLL_WAIT_TRIES) { - pr_err("MX5: pll locking failed\n"); - return -EINVAL; - } - - return 0; -} - -static void clk_pllv2_unprepare(struct clk_hw *hw) -{ - struct clk_pllv2 *pll = to_clk_pllv2(hw); - u32 reg; - void __iomem *pllbase; - - pllbase = pll->base; - reg = __raw_readl(pllbase + MXC_PLL_DP_CTL) & ~MXC_PLL_DP_CTL_UPEN; - __raw_writel(reg, pllbase + MXC_PLL_DP_CTL); -} - -static struct clk_ops clk_pllv2_ops = { - .prepare = clk_pllv2_prepare, - .unprepare = clk_pllv2_unprepare, - .recalc_rate = clk_pllv2_recalc_rate, - .round_rate = clk_pllv2_round_rate, - .set_rate = clk_pllv2_set_rate, -}; - -struct clk *imx_clk_pllv2(const char *name, const char *parent, - void __iomem *base) -{ - struct clk_pllv2 *pll; - struct clk *clk; - struct clk_init_data init; - - pll = kzalloc(sizeof(*pll), GFP_KERNEL); - if (!pll) - return ERR_PTR(-ENOMEM); - - pll->base = base; - - init.name = name; - init.ops = &clk_pllv2_ops; - init.flags = 0; - init.parent_names = &parent; - init.num_parents = 1; - - pll->hw.init = &init; - - clk = clk_register(NULL, &pll->hw); - if (IS_ERR(clk)) - kfree(pll); - - return clk; -} diff --git a/arch/arm/mach-imx/clk-pllv3.c b/arch/arm/mach-imx/clk-pllv3.c deleted file mode 100644 index 641ebc508..000000000 --- a/arch/arm/mach-imx/clk-pllv3.c +++ /dev/null @@ -1,331 +0,0 @@ -/* - * Copyright 2012 Freescale Semiconductor, Inc. - * Copyright 2012 Linaro Ltd. - * - * The code contained herein is licensed under the GNU General Public - * License. You may obtain a copy of the GNU General Public License - * Version 2 or later at the following locations: - * - * http://www.opensource.org/licenses/gpl-license.html - * http://www.gnu.org/copyleft/gpl.html - */ - -#include <linux/clk.h> -#include <linux/clk-provider.h> -#include <linux/delay.h> -#include <linux/io.h> -#include <linux/slab.h> -#include <linux/jiffies.h> -#include <linux/err.h> -#include "clk.h" - -#define PLL_NUM_OFFSET 0x10 -#define PLL_DENOM_OFFSET 0x20 - -#define BM_PLL_POWER (0x1 << 12) -#define BM_PLL_LOCK (0x1 << 31) - -/** - * struct clk_pllv3 - IMX PLL clock version 3 - * @clk_hw: clock source - * @base: base address of PLL registers - * @powerup_set: set POWER bit to power up the PLL - * @div_mask: mask of divider bits - * @div_shift: shift of divider bits - * - * IMX PLL clock version 3, found on i.MX6 series. Divider for pllv3 - * is actually a multiplier, and always sits at bit 0. - */ -struct clk_pllv3 { - struct clk_hw hw; - void __iomem *base; - bool powerup_set; - u32 div_mask; - u32 div_shift; -}; - -#define to_clk_pllv3(_hw) container_of(_hw, struct clk_pllv3, hw) - -static int clk_pllv3_wait_lock(struct clk_pllv3 *pll) -{ - unsigned long timeout = jiffies + msecs_to_jiffies(10); - u32 val = readl_relaxed(pll->base) & BM_PLL_POWER; - - /* No need to wait for lock when pll is not powered up */ - if ((pll->powerup_set && !val) || (!pll->powerup_set && val)) - return 0; - - /* Wait for PLL to lock */ - do { - if (readl_relaxed(pll->base) & BM_PLL_LOCK) - break; - if (time_after(jiffies, timeout)) - break; - usleep_range(50, 500); - } while (1); - - return readl_relaxed(pll->base) & BM_PLL_LOCK ? 0 : -ETIMEDOUT; -} - -static int clk_pllv3_prepare(struct clk_hw *hw) -{ - struct clk_pllv3 *pll = to_clk_pllv3(hw); - u32 val; - - val = readl_relaxed(pll->base); - if (pll->powerup_set) - val |= BM_PLL_POWER; - else - val &= ~BM_PLL_POWER; - writel_relaxed(val, pll->base); - - return clk_pllv3_wait_lock(pll); -} - -static void clk_pllv3_unprepare(struct clk_hw *hw) -{ - struct clk_pllv3 *pll = to_clk_pllv3(hw); - u32 val; - - val = readl_relaxed(pll->base); - if (pll->powerup_set) - val &= ~BM_PLL_POWER; - else - val |= BM_PLL_POWER; - writel_relaxed(val, pll->base); -} - -static unsigned long clk_pllv3_recalc_rate(struct clk_hw *hw, - unsigned long parent_rate) -{ - struct clk_pllv3 *pll = to_clk_pllv3(hw); - u32 div = (readl_relaxed(pll->base) >> pll->div_shift) & pll->div_mask; - - return (div == 1) ? parent_rate * 22 : parent_rate * 20; -} - -static long clk_pllv3_round_rate(struct clk_hw *hw, unsigned long rate, - unsigned long *prate) -{ - unsigned long parent_rate = *prate; - - return (rate >= parent_rate * 22) ? parent_rate * 22 : - parent_rate * 20; -} - -static int clk_pllv3_set_rate(struct clk_hw *hw, unsigned long rate, - unsigned long parent_rate) -{ - struct clk_pllv3 *pll = to_clk_pllv3(hw); - u32 val, div; - - if (rate == parent_rate * 22) - div = 1; - else if (rate == parent_rate * 20) - div = 0; - else - return -EINVAL; - - val = readl_relaxed(pll->base); - val &= ~(pll->div_mask << pll->div_shift); - val |= (div << pll->div_shift); - writel_relaxed(val, pll->base); - - return clk_pllv3_wait_lock(pll); -} - -static const struct clk_ops clk_pllv3_ops = { - .prepare = clk_pllv3_prepare, - .unprepare = clk_pllv3_unprepare, - .recalc_rate = clk_pllv3_recalc_rate, - .round_rate = clk_pllv3_round_rate, - .set_rate = clk_pllv3_set_rate, -}; - -static unsigned long clk_pllv3_sys_recalc_rate(struct clk_hw *hw, - unsigned long parent_rate) -{ - struct clk_pllv3 *pll = to_clk_pllv3(hw); - u32 div = readl_relaxed(pll->base) & pll->div_mask; - - return parent_rate * div / 2; -} - -static long clk_pllv3_sys_round_rate(struct clk_hw *hw, unsigned long rate, - unsigned long *prate) -{ - unsigned long parent_rate = *prate; - unsigned long min_rate = parent_rate * 54 / 2; - unsigned long max_rate = parent_rate * 108 / 2; - u32 div; - - if (rate > max_rate) - rate = max_rate; - else if (rate < min_rate) - rate = min_rate; - div = rate * 2 / parent_rate; - - return parent_rate * div / 2; -} - -static int clk_pllv3_sys_set_rate(struct clk_hw *hw, unsigned long rate, - unsigned long parent_rate) -{ - struct clk_pllv3 *pll = to_clk_pllv3(hw); - unsigned long min_rate = parent_rate * 54 / 2; - unsigned long max_rate = parent_rate * 108 / 2; - u32 val, div; - - if (rate < min_rate || rate > max_rate) - return -EINVAL; - - div = rate * 2 / parent_rate; - val = readl_relaxed(pll->base); - val &= ~pll->div_mask; - val |= div; - writel_relaxed(val, pll->base); - - return clk_pllv3_wait_lock(pll); -} - -static const struct clk_ops clk_pllv3_sys_ops = { - .prepare = clk_pllv3_prepare, - .unprepare = clk_pllv3_unprepare, - .recalc_rate = clk_pllv3_sys_recalc_rate, - .round_rate = clk_pllv3_sys_round_rate, - .set_rate = clk_pllv3_sys_set_rate, -}; - -static unsigned long clk_pllv3_av_recalc_rate(struct clk_hw *hw, - unsigned long parent_rate) -{ - struct clk_pllv3 *pll = to_clk_pllv3(hw); - u32 mfn = readl_relaxed(pll->base + PLL_NUM_OFFSET); - u32 mfd = readl_relaxed(pll->base + PLL_DENOM_OFFSET); - u32 div = readl_relaxed(pll->base) & pll->div_mask; - - return (parent_rate * div) + ((parent_rate / mfd) * mfn); -} - -static long clk_pllv3_av_round_rate(struct clk_hw *hw, unsigned long rate, - unsigned long *prate) -{ - unsigned long parent_rate = *prate; - unsigned long min_rate = parent_rate * 27; - unsigned long max_rate = parent_rate * 54; - u32 div; - u32 mfn, mfd = 1000000; - s64 temp64; - - if (rate > max_rate) - rate = max_rate; - else if (rate < min_rate) - rate = min_rate; - - div = rate / parent_rate; - temp64 = (u64) (rate - div * parent_rate); - temp64 *= mfd; - do_div(temp64, parent_rate); - mfn = temp64; - - return parent_rate * div + parent_rate / mfd * mfn; -} - -static int clk_pllv3_av_set_rate(struct clk_hw *hw, unsigned long rate, - unsigned long parent_rate) -{ - struct clk_pllv3 *pll = to_clk_pllv3(hw); - unsigned long min_rate = parent_rate * 27; - unsigned long max_rate = parent_rate * 54; - u32 val, div; - u32 mfn, mfd = 1000000; - s64 temp64; - - if (rate < min_rate || rate > max_rate) - return -EINVAL; - - div = rate / parent_rate; - temp64 = (u64) (rate - div * parent_rate); - temp64 *= mfd; - do_div(temp64, parent_rate); - mfn = temp64; - - val = readl_relaxed(pll->base); - val &= ~pll->div_mask; - val |= div; - writel_relaxed(val, pll->base); - writel_relaxed(mfn, pll->base + PLL_NUM_OFFSET); - writel_relaxed(mfd, pll->base + PLL_DENOM_OFFSET); - - return clk_pllv3_wait_lock(pll); -} - -static const struct clk_ops clk_pllv3_av_ops = { - .prepare = clk_pllv3_prepare, - .unprepare = clk_pllv3_unprepare, - .recalc_rate = clk_pllv3_av_recalc_rate, - .round_rate = clk_pllv3_av_round_rate, - .set_rate = clk_pllv3_av_set_rate, -}; - -static unsigned long clk_pllv3_enet_recalc_rate(struct clk_hw *hw, - unsigned long parent_rate) -{ - return 500000000; -} - -static const struct clk_ops clk_pllv3_enet_ops = { - .prepare = clk_pllv3_prepare, - .unprepare = clk_pllv3_unprepare, - .recalc_rate = clk_pllv3_enet_recalc_rate, -}; - -struct clk *imx_clk_pllv3(enum imx_pllv3_type type, const char *name, - const char *parent_name, void __iomem *base, - u32 div_mask) -{ - struct clk_pllv3 *pll; - const struct clk_ops *ops; - struct clk *clk; - struct clk_init_data init; - - pll = kzalloc(sizeof(*pll), GFP_KERNEL); - if (!pll) - return ERR_PTR(-ENOMEM); - - switch (type) { - case IMX_PLLV3_SYS: - ops = &clk_pllv3_sys_ops; - break; - case IMX_PLLV3_USB_VF610: - pll->div_shift = 1; - case IMX_PLLV3_USB: - ops = &clk_pllv3_ops; - pll->powerup_set = true; - break; - case IMX_PLLV3_AV: - ops = &clk_pllv3_av_ops; - break; - case IMX_PLLV3_ENET: - ops = &clk_pllv3_enet_ops; - break; - default: - ops = &clk_pllv3_ops; - } - pll->base = base; - pll->div_mask = div_mask; - - init.name = name; - init.ops = ops; - init.flags = 0; - init.parent_names = &parent_name; - init.num_parents = 1; - - pll->hw.init = &init; - - clk = clk_register(NULL, &pll->hw); - if (IS_ERR(clk)) - kfree(pll); - - return clk; -} diff --git a/arch/arm/mach-imx/clk-vf610.c b/arch/arm/mach-imx/clk-vf610.c deleted file mode 100644 index 61876ed6e..000000000 --- a/arch/arm/mach-imx/clk-vf610.c +++ /dev/null @@ -1,412 +0,0 @@ -/* - * Copyright 2012-2013 Freescale Semiconductor, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - */ - -#include <linux/of_address.h> -#include <linux/clk.h> -#include <dt-bindings/clock/vf610-clock.h> - -#include "clk.h" - -#define CCM_CCR (ccm_base + 0x00) -#define CCM_CSR (ccm_base + 0x04) -#define CCM_CCSR (ccm_base + 0x08) -#define CCM_CACRR (ccm_base + 0x0c) -#define CCM_CSCMR1 (ccm_base + 0x10) -#define CCM_CSCDR1 (ccm_base + 0x14) -#define CCM_CSCDR2 (ccm_base + 0x18) -#define CCM_CSCDR3 (ccm_base + 0x1c) -#define CCM_CSCMR2 (ccm_base + 0x20) -#define CCM_CSCDR4 (ccm_base + 0x24) -#define CCM_CLPCR (ccm_base + 0x2c) -#define CCM_CISR (ccm_base + 0x30) -#define CCM_CIMR (ccm_base + 0x34) -#define CCM_CGPR (ccm_base + 0x3c) -#define CCM_CCGR0 (ccm_base + 0x40) -#define CCM_CCGR1 (ccm_base + 0x44) -#define CCM_CCGR2 (ccm_base + 0x48) -#define CCM_CCGR3 (ccm_base + 0x4c) -#define CCM_CCGR4 (ccm_base + 0x50) -#define CCM_CCGR5 (ccm_base + 0x54) -#define CCM_CCGR6 (ccm_base + 0x58) -#define CCM_CCGR7 (ccm_base + 0x5c) -#define CCM_CCGR8 (ccm_base + 0x60) -#define CCM_CCGR9 (ccm_base + 0x64) -#define CCM_CCGR10 (ccm_base + 0x68) -#define CCM_CCGR11 (ccm_base + 0x6c) -#define CCM_CMEOR0 (ccm_base + 0x70) -#define CCM_CMEOR1 (ccm_base + 0x74) -#define CCM_CMEOR2 (ccm_base + 0x78) -#define CCM_CMEOR3 (ccm_base + 0x7c) -#define CCM_CMEOR4 (ccm_base + 0x80) -#define CCM_CMEOR5 (ccm_base + 0x84) -#define CCM_CPPDSR (ccm_base + 0x88) -#define CCM_CCOWR (ccm_base + 0x8c) -#define CCM_CCPGR0 (ccm_base + 0x90) -#define CCM_CCPGR1 (ccm_base + 0x94) -#define CCM_CCPGR2 (ccm_base + 0x98) -#define CCM_CCPGR3 (ccm_base + 0x9c) - -#define CCM_CCGRx_CGn(n) ((n) * 2) - -#define PFD_PLL1_BASE (anatop_base + 0x2b0) -#define PFD_PLL2_BASE (anatop_base + 0x100) -#define PFD_PLL3_BASE (anatop_base + 0xf0) -#define PLL1_CTRL (anatop_base + 0x270) -#define PLL2_CTRL (anatop_base + 0x30) -#define PLL3_CTRL (anatop_base + 0x10) -#define PLL4_CTRL (anatop_base + 0x70) -#define PLL5_CTRL (anatop_base + 0xe0) -#define PLL6_CTRL (anatop_base + 0xa0) -#define PLL7_CTRL (anatop_base + 0x20) -#define ANA_MISC1 (anatop_base + 0x160) - -static void __iomem *anatop_base; -static void __iomem *ccm_base; - -/* sources for multiplexer clocks, this is used multiple times */ -static const char *fast_sels[] = { "firc", "fxosc", }; -static const char *slow_sels[] = { "sirc_32k", "sxosc", }; -static const char *pll1_sels[] = { "pll1_sys", "pll1_pfd1", "pll1_pfd2", "pll1_pfd3", "pll1_pfd4", }; -static const char *pll2_sels[] = { "pll2_bus", "pll2_pfd1", "pll2_pfd2", "pll2_pfd3", "pll2_pfd4", }; -static const char *pll_bypass_src_sels[] = { "fast_clk_sel", "lvds1_in", }; -static const char *pll1_bypass_sels[] = { "pll1", "pll1_bypass_src", }; -static const char *pll2_bypass_sels[] = { "pll2", "pll2_bypass_src", }; -static const char *pll3_bypass_sels[] = { "pll3", "pll3_bypass_src", }; -static const char *pll4_bypass_sels[] = { "pll4", "pll4_bypass_src", }; -static const char *pll5_bypass_sels[] = { "pll5", "pll5_bypass_src", }; -static const char *pll6_bypass_sels[] = { "pll6", "pll6_bypass_src", }; -static const char *pll7_bypass_sels[] = { "pll7", "pll7_bypass_src", }; -static const char *sys_sels[] = { "fast_clk_sel", "slow_clk_sel", "pll2_pfd_sel", "pll2_bus", "pll1_pfd_sel", "pll3_usb_otg", }; -static const char *ddr_sels[] = { "pll2_pfd2", "sys_sel", }; -static const char *rmii_sels[] = { "enet_ext", "audio_ext", "enet_50m", "enet_25m", }; -static const char *enet_ts_sels[] = { "enet_ext", "fxosc", "audio_ext", "usb", "enet_ts", "enet_25m", "enet_50m", }; -static const char *esai_sels[] = { "audio_ext", "mlb", "spdif_rx", "pll4_audio_div", }; -static const char *sai_sels[] = { "audio_ext", "mlb", "spdif_rx", "pll4_audio_div", }; -static const char *nfc_sels[] = { "platform_bus", "pll1_pfd1", "pll3_pfd1", "pll3_pfd3", }; -static const char *qspi_sels[] = { "pll3_usb_otg", "pll3_pfd4", "pll2_pfd4", "pll1_pfd4", }; -static const char *esdhc_sels[] = { "pll3_usb_otg", "pll3_pfd3", "pll1_pfd3", "platform_bus", }; -static const char *dcu_sels[] = { "pll1_pfd2", "pll3_usb_otg", }; -static const char *gpu_sels[] = { "pll2_pfd2", "pll3_pfd2", }; -static const char *vadc_sels[] = { "pll6_video_div", "pll3_usb_otg_div", "pll3_usb_otg", }; -/* FTM counter clock source, not module clock */ -static const char *ftm_ext_sels[] = {"sirc_128k", "sxosc", "fxosc_half", "audio_ext", }; -static const char *ftm_fix_sels[] = { "sxosc", "ipg_bus", }; - - -static struct clk_div_table pll4_audio_div_table[] = { - { .val = 0, .div = 1 }, - { .val = 1, .div = 2 }, - { .val = 2, .div = 6 }, - { .val = 3, .div = 8 }, - { .val = 4, .div = 10 }, - { .val = 5, .div = 12 }, - { .val = 6, .div = 14 }, - { .val = 7, .div = 16 }, - { } -}; - -static struct clk *clk[VF610_CLK_END]; -static struct clk_onecell_data clk_data; - -static unsigned int const clks_init_on[] __initconst = { - VF610_CLK_SYS_BUS, - VF610_CLK_DDR_SEL, -}; - -static struct clk * __init vf610_get_fixed_clock( - struct device_node *ccm_node, const char *name) -{ - struct clk *clk = of_clk_get_by_name(ccm_node, name); - - /* Backward compatibility if device tree is missing clks assignments */ - if (IS_ERR(clk)) - clk = imx_obtain_fixed_clock(name, 0); - return clk; -}; - -static void __init vf610_clocks_init(struct device_node *ccm_node) -{ - struct device_node *np; - int i; - - clk[VF610_CLK_DUMMY] = imx_clk_fixed("dummy", 0); - clk[VF610_CLK_SIRC_128K] = imx_clk_fixed("sirc_128k", 128000); - clk[VF610_CLK_SIRC_32K] = imx_clk_fixed("sirc_32k", 32000); - clk[VF610_CLK_FIRC] = imx_clk_fixed("firc", 24000000); - - clk[VF610_CLK_SXOSC] = vf610_get_fixed_clock(ccm_node, "sxosc"); - clk[VF610_CLK_FXOSC] = vf610_get_fixed_clock(ccm_node, "fxosc"); - clk[VF610_CLK_AUDIO_EXT] = vf610_get_fixed_clock(ccm_node, "audio_ext"); - clk[VF610_CLK_ENET_EXT] = vf610_get_fixed_clock(ccm_node, "enet_ext"); - - /* Clock source from external clock via LVDs PAD */ - clk[VF610_CLK_ANACLK1] = vf610_get_fixed_clock(ccm_node, "anaclk1"); - - clk[VF610_CLK_FXOSC_HALF] = imx_clk_fixed_factor("fxosc_half", "fxosc", 1, 2); - - np = of_find_compatible_node(NULL, NULL, "fsl,vf610-anatop"); - anatop_base = of_iomap(np, 0); - BUG_ON(!anatop_base); - - np = ccm_node; - ccm_base = of_iomap(np, 0); - BUG_ON(!ccm_base); - - clk[VF610_CLK_SLOW_CLK_SEL] = imx_clk_mux("slow_clk_sel", CCM_CCSR, 4, 1, slow_sels, ARRAY_SIZE(slow_sels)); - clk[VF610_CLK_FASK_CLK_SEL] = imx_clk_mux("fast_clk_sel", CCM_CCSR, 5, 1, fast_sels, ARRAY_SIZE(fast_sels)); - - clk[VF610_CLK_PLL1_BYPASS_SRC] = imx_clk_mux("pll1_bypass_src", PLL1_CTRL, 14, 1, pll_bypass_src_sels, ARRAY_SIZE(pll_bypass_src_sels)); - clk[VF610_CLK_PLL2_BYPASS_SRC] = imx_clk_mux("pll2_bypass_src", PLL2_CTRL, 14, 1, pll_bypass_src_sels, ARRAY_SIZE(pll_bypass_src_sels)); - clk[VF610_CLK_PLL3_BYPASS_SRC] = imx_clk_mux("pll3_bypass_src", PLL3_CTRL, 14, 1, pll_bypass_src_sels, ARRAY_SIZE(pll_bypass_src_sels)); - clk[VF610_CLK_PLL4_BYPASS_SRC] = imx_clk_mux("pll4_bypass_src", PLL4_CTRL, 14, 1, pll_bypass_src_sels, ARRAY_SIZE(pll_bypass_src_sels)); - clk[VF610_CLK_PLL5_BYPASS_SRC] = imx_clk_mux("pll5_bypass_src", PLL5_CTRL, 14, 1, pll_bypass_src_sels, ARRAY_SIZE(pll_bypass_src_sels)); - clk[VF610_CLK_PLL6_BYPASS_SRC] = imx_clk_mux("pll6_bypass_src", PLL6_CTRL, 14, 1, pll_bypass_src_sels, ARRAY_SIZE(pll_bypass_src_sels)); - clk[VF610_CLK_PLL7_BYPASS_SRC] = imx_clk_mux("pll7_bypass_src", PLL7_CTRL, 14, 1, pll_bypass_src_sels, ARRAY_SIZE(pll_bypass_src_sels)); - - clk[VF610_CLK_PLL1] = imx_clk_pllv3(IMX_PLLV3_GENERIC, "pll1", "pll1_bypass_src", PLL1_CTRL, 0x1); - clk[VF610_CLK_PLL2] = imx_clk_pllv3(IMX_PLLV3_GENERIC, "pll2", "pll2_bypass_src", PLL2_CTRL, 0x1); - clk[VF610_CLK_PLL3] = imx_clk_pllv3(IMX_PLLV3_USB_VF610, "pll3", "pll3_bypass_src", PLL3_CTRL, 0x2); - clk[VF610_CLK_PLL4] = imx_clk_pllv3(IMX_PLLV3_AV, "pll4", "pll4_bypass_src", PLL4_CTRL, 0x7f); - clk[VF610_CLK_PLL5] = imx_clk_pllv3(IMX_PLLV3_ENET, "pll5", "pll5_bypass_src", PLL5_CTRL, 0x3); - clk[VF610_CLK_PLL6] = imx_clk_pllv3(IMX_PLLV3_AV, "pll6", "pll6_bypass_src", PLL6_CTRL, 0x7f); - clk[VF610_CLK_PLL7] = imx_clk_pllv3(IMX_PLLV3_USB_VF610, "pll7", "pll7_bypass_src", PLL7_CTRL, 0x2); - - clk[VF610_PLL1_BYPASS] = imx_clk_mux_flags("pll1_bypass", PLL1_CTRL, 16, 1, pll1_bypass_sels, ARRAY_SIZE(pll1_bypass_sels), CLK_SET_RATE_PARENT); - clk[VF610_PLL2_BYPASS] = imx_clk_mux_flags("pll2_bypass", PLL2_CTRL, 16, 1, pll2_bypass_sels, ARRAY_SIZE(pll2_bypass_sels), CLK_SET_RATE_PARENT); - clk[VF610_PLL3_BYPASS] = imx_clk_mux_flags("pll3_bypass", PLL3_CTRL, 16, 1, pll3_bypass_sels, ARRAY_SIZE(pll3_bypass_sels), CLK_SET_RATE_PARENT); - clk[VF610_PLL4_BYPASS] = imx_clk_mux_flags("pll4_bypass", PLL4_CTRL, 16, 1, pll4_bypass_sels, ARRAY_SIZE(pll4_bypass_sels), CLK_SET_RATE_PARENT); - clk[VF610_PLL5_BYPASS] = imx_clk_mux_flags("pll5_bypass", PLL5_CTRL, 16, 1, pll5_bypass_sels, ARRAY_SIZE(pll5_bypass_sels), CLK_SET_RATE_PARENT); - clk[VF610_PLL6_BYPASS] = imx_clk_mux_flags("pll6_bypass", PLL6_CTRL, 16, 1, pll6_bypass_sels, ARRAY_SIZE(pll6_bypass_sels), CLK_SET_RATE_PARENT); - clk[VF610_PLL7_BYPASS] = imx_clk_mux_flags("pll7_bypass", PLL7_CTRL, 16, 1, pll7_bypass_sels, ARRAY_SIZE(pll7_bypass_sels), CLK_SET_RATE_PARENT); - - /* Do not bypass PLLs initially */ - clk_set_parent(clk[VF610_PLL1_BYPASS], clk[VF610_CLK_PLL1]); - clk_set_parent(clk[VF610_PLL2_BYPASS], clk[VF610_CLK_PLL2]); - clk_set_parent(clk[VF610_PLL3_BYPASS], clk[VF610_CLK_PLL3]); - clk_set_parent(clk[VF610_PLL4_BYPASS], clk[VF610_CLK_PLL4]); - clk_set_parent(clk[VF610_PLL5_BYPASS], clk[VF610_CLK_PLL5]); - clk_set_parent(clk[VF610_PLL6_BYPASS], clk[VF610_CLK_PLL6]); - clk_set_parent(clk[VF610_PLL7_BYPASS], clk[VF610_CLK_PLL7]); - - clk[VF610_CLK_PLL1_SYS] = imx_clk_gate("pll1_sys", "pll1_bypass", PLL1_CTRL, 13); - clk[VF610_CLK_PLL2_BUS] = imx_clk_gate("pll2_bus", "pll2_bypass", PLL2_CTRL, 13); - clk[VF610_CLK_PLL3_USB_OTG] = imx_clk_gate("pll3_usb_otg", "pll3_bypass", PLL3_CTRL, 13); - clk[VF610_CLK_PLL4_AUDIO] = imx_clk_gate("pll4_audio", "pll4_bypass", PLL4_CTRL, 13); - clk[VF610_CLK_PLL5_ENET] = imx_clk_gate("pll5_enet", "pll5_bypass", PLL5_CTRL, 13); - clk[VF610_CLK_PLL6_VIDEO] = imx_clk_gate("pll6_video", "pll6_bypass", PLL6_CTRL, 13); - clk[VF610_CLK_PLL7_USB_HOST] = imx_clk_gate("pll7_usb_host", "pll7_bypass", PLL7_CTRL, 13); - - clk[VF610_CLK_LVDS1_IN] = imx_clk_gate_exclusive("lvds1_in", "anaclk1", ANA_MISC1, 12, BIT(10)); - - clk[VF610_CLK_PLL1_PFD1] = imx_clk_pfd("pll1_pfd1", "pll1_sys", PFD_PLL1_BASE, 0); - clk[VF610_CLK_PLL1_PFD2] = imx_clk_pfd("pll1_pfd2", "pll1_sys", PFD_PLL1_BASE, 1); - clk[VF610_CLK_PLL1_PFD3] = imx_clk_pfd("pll1_pfd3", "pll1_sys", PFD_PLL1_BASE, 2); - clk[VF610_CLK_PLL1_PFD4] = imx_clk_pfd("pll1_pfd4", "pll1_sys", PFD_PLL1_BASE, 3); - - clk[VF610_CLK_PLL2_PFD1] = imx_clk_pfd("pll2_pfd1", "pll2_bus", PFD_PLL2_BASE, 0); - clk[VF610_CLK_PLL2_PFD2] = imx_clk_pfd("pll2_pfd2", "pll2_bus", PFD_PLL2_BASE, 1); - clk[VF610_CLK_PLL2_PFD3] = imx_clk_pfd("pll2_pfd3", "pll2_bus", PFD_PLL2_BASE, 2); - clk[VF610_CLK_PLL2_PFD4] = imx_clk_pfd("pll2_pfd4", "pll2_bus", PFD_PLL2_BASE, 3); - - clk[VF610_CLK_PLL3_PFD1] = imx_clk_pfd("pll3_pfd1", "pll3_usb_otg", PFD_PLL3_BASE, 0); - clk[VF610_CLK_PLL3_PFD2] = imx_clk_pfd("pll3_pfd2", "pll3_usb_otg", PFD_PLL3_BASE, 1); - clk[VF610_CLK_PLL3_PFD3] = imx_clk_pfd("pll3_pfd3", "pll3_usb_otg", PFD_PLL3_BASE, 2); - clk[VF610_CLK_PLL3_PFD4] = imx_clk_pfd("pll3_pfd4", "pll3_usb_otg", PFD_PLL3_BASE, 3); - - clk[VF610_CLK_PLL1_PFD_SEL] = imx_clk_mux("pll1_pfd_sel", CCM_CCSR, 16, 3, pll1_sels, 5); - clk[VF610_CLK_PLL2_PFD_SEL] = imx_clk_mux("pll2_pfd_sel", CCM_CCSR, 19, 3, pll2_sels, 5); - clk[VF610_CLK_SYS_SEL] = imx_clk_mux("sys_sel", CCM_CCSR, 0, 3, sys_sels, ARRAY_SIZE(sys_sels)); - clk[VF610_CLK_DDR_SEL] = imx_clk_mux("ddr_sel", CCM_CCSR, 6, 1, ddr_sels, ARRAY_SIZE(ddr_sels)); - clk[VF610_CLK_SYS_BUS] = imx_clk_divider("sys_bus", "sys_sel", CCM_CACRR, 0, 3); - clk[VF610_CLK_PLATFORM_BUS] = imx_clk_divider("platform_bus", "sys_bus", CCM_CACRR, 3, 3); - clk[VF610_CLK_IPG_BUS] = imx_clk_divider("ipg_bus", "platform_bus", CCM_CACRR, 11, 2); - - clk[VF610_CLK_PLL3_MAIN_DIV] = imx_clk_divider("pll3_usb_otg_div", "pll3_usb_otg", CCM_CACRR, 20, 1); - clk[VF610_CLK_PLL4_MAIN_DIV] = clk_register_divider_table(NULL, "pll4_audio_div", "pll4_audio", 0, CCM_CACRR, 6, 3, 0, pll4_audio_div_table, &imx_ccm_lock); - clk[VF610_CLK_PLL6_MAIN_DIV] = imx_clk_divider("pll6_video_div", "pll6_video", CCM_CACRR, 21, 1); - - clk[VF610_CLK_USBPHY0] = imx_clk_gate("usbphy0", "pll3_usb_otg", PLL3_CTRL, 6); - clk[VF610_CLK_USBPHY1] = imx_clk_gate("usbphy1", "pll7_usb_host", PLL7_CTRL, 6); - - clk[VF610_CLK_USBC0] = imx_clk_gate2("usbc0", "ipg_bus", CCM_CCGR1, CCM_CCGRx_CGn(4)); - clk[VF610_CLK_USBC1] = imx_clk_gate2("usbc1", "ipg_bus", CCM_CCGR7, CCM_CCGRx_CGn(4)); - - clk[VF610_CLK_QSPI0_SEL] = imx_clk_mux("qspi0_sel", CCM_CSCMR1, 22, 2, qspi_sels, 4); - clk[VF610_CLK_QSPI0_EN] = imx_clk_gate("qspi0_en", "qspi0_sel", CCM_CSCDR3, 4); - clk[VF610_CLK_QSPI0_X4_DIV] = imx_clk_divider("qspi0_x4", "qspi0_en", CCM_CSCDR3, 0, 2); - clk[VF610_CLK_QSPI0_X2_DIV] = imx_clk_divider("qspi0_x2", "qspi0_x4", CCM_CSCDR3, 2, 1); - clk[VF610_CLK_QSPI0_X1_DIV] = imx_clk_divider("qspi0_x1", "qspi0_x2", CCM_CSCDR3, 3, 1); - clk[VF610_CLK_QSPI0] = imx_clk_gate2("qspi0", "qspi0_x1", CCM_CCGR2, CCM_CCGRx_CGn(4)); - - clk[VF610_CLK_QSPI1_SEL] = imx_clk_mux("qspi1_sel", CCM_CSCMR1, 24, 2, qspi_sels, 4); - clk[VF610_CLK_QSPI1_EN] = imx_clk_gate("qspi1_en", "qspi1_sel", CCM_CSCDR3, 12); - clk[VF610_CLK_QSPI1_X4_DIV] = imx_clk_divider("qspi1_x4", "qspi1_en", CCM_CSCDR3, 8, 2); - clk[VF610_CLK_QSPI1_X2_DIV] = imx_clk_divider("qspi1_x2", "qspi1_x4", CCM_CSCDR3, 10, 1); - clk[VF610_CLK_QSPI1_X1_DIV] = imx_clk_divider("qspi1_x1", "qspi1_x2", CCM_CSCDR3, 11, 1); - clk[VF610_CLK_QSPI1] = imx_clk_gate2("qspi1", "qspi1_x1", CCM_CCGR8, CCM_CCGRx_CGn(4)); - - clk[VF610_CLK_ENET_50M] = imx_clk_fixed_factor("enet_50m", "pll5_enet", 1, 10); - clk[VF610_CLK_ENET_25M] = imx_clk_fixed_factor("enet_25m", "pll5_enet", 1, 20); - clk[VF610_CLK_ENET_SEL] = imx_clk_mux("enet_sel", CCM_CSCMR2, 4, 2, rmii_sels, 4); - clk[VF610_CLK_ENET_TS_SEL] = imx_clk_mux("enet_ts_sel", CCM_CSCMR2, 0, 3, enet_ts_sels, 7); - clk[VF610_CLK_ENET] = imx_clk_gate("enet", "enet_sel", CCM_CSCDR1, 24); - clk[VF610_CLK_ENET_TS] = imx_clk_gate("enet_ts", "enet_ts_sel", CCM_CSCDR1, 23); - clk[VF610_CLK_ENET0] = imx_clk_gate2("enet0", "ipg_bus", CCM_CCGR9, CCM_CCGRx_CGn(0)); - clk[VF610_CLK_ENET1] = imx_clk_gate2("enet1", "ipg_bus", CCM_CCGR9, CCM_CCGRx_CGn(1)); - - clk[VF610_CLK_PIT] = imx_clk_gate2("pit", "ipg_bus", CCM_CCGR1, CCM_CCGRx_CGn(7)); - - clk[VF610_CLK_UART0] = imx_clk_gate2("uart0", "ipg_bus", CCM_CCGR0, CCM_CCGRx_CGn(7)); - clk[VF610_CLK_UART1] = imx_clk_gate2("uart1", "ipg_bus", CCM_CCGR0, CCM_CCGRx_CGn(8)); - clk[VF610_CLK_UART2] = imx_clk_gate2("uart2", "ipg_bus", CCM_CCGR0, CCM_CCGRx_CGn(9)); - clk[VF610_CLK_UART3] = imx_clk_gate2("uart3", "ipg_bus", CCM_CCGR0, CCM_CCGRx_CGn(10)); - clk[VF610_CLK_UART4] = imx_clk_gate2("uart4", "ipg_bus", CCM_CCGR6, CCM_CCGRx_CGn(9)); - clk[VF610_CLK_UART5] = imx_clk_gate2("uart5", "ipg_bus", CCM_CCGR6, CCM_CCGRx_CGn(10)); - - clk[VF610_CLK_I2C0] = imx_clk_gate2("i2c0", "ipg_bus", CCM_CCGR4, CCM_CCGRx_CGn(6)); - clk[VF610_CLK_I2C1] = imx_clk_gate2("i2c1", "ipg_bus", CCM_CCGR4, CCM_CCGRx_CGn(7)); - - clk[VF610_CLK_DSPI0] = imx_clk_gate2("dspi0", "ipg_bus", CCM_CCGR0, CCM_CCGRx_CGn(12)); - clk[VF610_CLK_DSPI1] = imx_clk_gate2("dspi1", "ipg_bus", CCM_CCGR0, CCM_CCGRx_CGn(13)); - clk[VF610_CLK_DSPI2] = imx_clk_gate2("dspi2", "ipg_bus", CCM_CCGR6, CCM_CCGRx_CGn(12)); - clk[VF610_CLK_DSPI3] = imx_clk_gate2("dspi3", "ipg_bus", CCM_CCGR6, CCM_CCGRx_CGn(13)); - - clk[VF610_CLK_WDT] = imx_clk_gate2("wdt", "ipg_bus", CCM_CCGR1, CCM_CCGRx_CGn(14)); - - clk[VF610_CLK_ESDHC0_SEL] = imx_clk_mux("esdhc0_sel", CCM_CSCMR1, 16, 2, esdhc_sels, 4); - clk[VF610_CLK_ESDHC0_EN] = imx_clk_gate("esdhc0_en", "esdhc0_sel", CCM_CSCDR2, 28); - clk[VF610_CLK_ESDHC0_DIV] = imx_clk_divider("esdhc0_div", "esdhc0_en", CCM_CSCDR2, 16, 4); - clk[VF610_CLK_ESDHC0] = imx_clk_gate2("eshc0", "esdhc0_div", CCM_CCGR7, CCM_CCGRx_CGn(1)); - - clk[VF610_CLK_ESDHC1_SEL] = imx_clk_mux("esdhc1_sel", CCM_CSCMR1, 18, 2, esdhc_sels, 4); - clk[VF610_CLK_ESDHC1_EN] = imx_clk_gate("esdhc1_en", "esdhc1_sel", CCM_CSCDR2, 29); - clk[VF610_CLK_ESDHC1_DIV] = imx_clk_divider("esdhc1_div", "esdhc1_en", CCM_CSCDR2, 20, 4); - clk[VF610_CLK_ESDHC1] = imx_clk_gate2("eshc1", "esdhc1_div", CCM_CCGR7, CCM_CCGRx_CGn(2)); - - /* - * ftm_ext_clk and ftm_fix_clk are FTM timer counter's - * selectable clock sources, both use a common enable bit - * in CCM_CSCDR1, selecting "dummy" clock as parent of - * "ftm0_ext_fix" make it serve only for enable/disable. - */ - clk[VF610_CLK_FTM0_EXT_SEL] = imx_clk_mux("ftm0_ext_sel", CCM_CSCMR2, 6, 2, ftm_ext_sels, 4); - clk[VF610_CLK_FTM0_FIX_SEL] = imx_clk_mux("ftm0_fix_sel", CCM_CSCMR2, 14, 1, ftm_fix_sels, 2); - clk[VF610_CLK_FTM0_EXT_FIX_EN] = imx_clk_gate("ftm0_ext_fix_en", "dummy", CCM_CSCDR1, 25); - clk[VF610_CLK_FTM1_EXT_SEL] = imx_clk_mux("ftm1_ext_sel", CCM_CSCMR2, 8, 2, ftm_ext_sels, 4); - clk[VF610_CLK_FTM1_FIX_SEL] = imx_clk_mux("ftm1_fix_sel", CCM_CSCMR2, 15, 1, ftm_fix_sels, 2); - clk[VF610_CLK_FTM1_EXT_FIX_EN] = imx_clk_gate("ftm1_ext_fix_en", "dummy", CCM_CSCDR1, 26); - clk[VF610_CLK_FTM2_EXT_SEL] = imx_clk_mux("ftm2_ext_sel", CCM_CSCMR2, 10, 2, ftm_ext_sels, 4); - clk[VF610_CLK_FTM2_FIX_SEL] = imx_clk_mux("ftm2_fix_sel", CCM_CSCMR2, 16, 1, ftm_fix_sels, 2); - clk[VF610_CLK_FTM2_EXT_FIX_EN] = imx_clk_gate("ftm2_ext_fix_en", "dummy", CCM_CSCDR1, 27); - clk[VF610_CLK_FTM3_EXT_SEL] = imx_clk_mux("ftm3_ext_sel", CCM_CSCMR2, 12, 2, ftm_ext_sels, 4); - clk[VF610_CLK_FTM3_FIX_SEL] = imx_clk_mux("ftm3_fix_sel", CCM_CSCMR2, 17, 1, ftm_fix_sels, 2); - clk[VF610_CLK_FTM3_EXT_FIX_EN] = imx_clk_gate("ftm3_ext_fix_en", "dummy", CCM_CSCDR1, 28); - - /* ftm(n)_clk are FTM module operation clock */ - clk[VF610_CLK_FTM0] = imx_clk_gate2("ftm0", "ipg_bus", CCM_CCGR1, CCM_CCGRx_CGn(8)); - clk[VF610_CLK_FTM1] = imx_clk_gate2("ftm1", "ipg_bus", CCM_CCGR1, CCM_CCGRx_CGn(9)); - clk[VF610_CLK_FTM2] = imx_clk_gate2("ftm2", "ipg_bus", CCM_CCGR7, CCM_CCGRx_CGn(8)); - clk[VF610_CLK_FTM3] = imx_clk_gate2("ftm3", "ipg_bus", CCM_CCGR7, CCM_CCGRx_CGn(9)); - - clk[VF610_CLK_DCU0_SEL] = imx_clk_mux("dcu0_sel", CCM_CSCMR1, 28, 1, dcu_sels, 2); - clk[VF610_CLK_DCU0_EN] = imx_clk_gate("dcu0_en", "dcu0_sel", CCM_CSCDR3, 19); - clk[VF610_CLK_DCU0_DIV] = imx_clk_divider("dcu0_div", "dcu0_en", CCM_CSCDR3, 16, 3); - clk[VF610_CLK_DCU0] = imx_clk_gate2("dcu0", "dcu0_div", CCM_CCGR3, CCM_CCGRx_CGn(8)); - clk[VF610_CLK_DCU1_SEL] = imx_clk_mux("dcu1_sel", CCM_CSCMR1, 29, 1, dcu_sels, 2); - clk[VF610_CLK_DCU1_EN] = imx_clk_gate("dcu1_en", "dcu1_sel", CCM_CSCDR3, 23); - clk[VF610_CLK_DCU1_DIV] = imx_clk_divider("dcu1_div", "dcu1_en", CCM_CSCDR3, 20, 3); - clk[VF610_CLK_DCU1] = imx_clk_gate2("dcu1", "dcu1_div", CCM_CCGR9, CCM_CCGRx_CGn(8)); - - clk[VF610_CLK_ESAI_SEL] = imx_clk_mux("esai_sel", CCM_CSCMR1, 20, 2, esai_sels, 4); - clk[VF610_CLK_ESAI_EN] = imx_clk_gate("esai_en", "esai_sel", CCM_CSCDR2, 30); - clk[VF610_CLK_ESAI_DIV] = imx_clk_divider("esai_div", "esai_en", CCM_CSCDR2, 24, 4); - clk[VF610_CLK_ESAI] = imx_clk_gate2("esai", "esai_div", CCM_CCGR4, CCM_CCGRx_CGn(2)); - - clk[VF610_CLK_SAI0_SEL] = imx_clk_mux("sai0_sel", CCM_CSCMR1, 0, 2, sai_sels, 4); - clk[VF610_CLK_SAI0_EN] = imx_clk_gate("sai0_en", "sai0_sel", CCM_CSCDR1, 16); - clk[VF610_CLK_SAI0_DIV] = imx_clk_divider("sai0_div", "sai0_en", CCM_CSCDR1, 0, 4); - clk[VF610_CLK_SAI0] = imx_clk_gate2("sai0", "sai0_div", CCM_CCGR0, CCM_CCGRx_CGn(15)); - - clk[VF610_CLK_SAI1_SEL] = imx_clk_mux("sai1_sel", CCM_CSCMR1, 2, 2, sai_sels, 4); - clk[VF610_CLK_SAI1_EN] = imx_clk_gate("sai1_en", "sai1_sel", CCM_CSCDR1, 17); - clk[VF610_CLK_SAI1_DIV] = imx_clk_divider("sai1_div", "sai1_en", CCM_CSCDR1, 4, 4); - clk[VF610_CLK_SAI1] = imx_clk_gate2("sai1", "sai1_div", CCM_CCGR1, CCM_CCGRx_CGn(0)); - - clk[VF610_CLK_SAI2_SEL] = imx_clk_mux("sai2_sel", CCM_CSCMR1, 4, 2, sai_sels, 4); - clk[VF610_CLK_SAI2_EN] = imx_clk_gate("sai2_en", "sai2_sel", CCM_CSCDR1, 18); - clk[VF610_CLK_SAI2_DIV] = imx_clk_divider("sai2_div", "sai2_en", CCM_CSCDR1, 8, 4); - clk[VF610_CLK_SAI2] = imx_clk_gate2("sai2", "sai2_div", CCM_CCGR1, CCM_CCGRx_CGn(1)); - - clk[VF610_CLK_SAI3_SEL] = imx_clk_mux("sai3_sel", CCM_CSCMR1, 6, 2, sai_sels, 4); - clk[VF610_CLK_SAI3_EN] = imx_clk_gate("sai3_en", "sai3_sel", CCM_CSCDR1, 19); - clk[VF610_CLK_SAI3_DIV] = imx_clk_divider("sai3_div", "sai3_en", CCM_CSCDR1, 12, 4); - clk[VF610_CLK_SAI3] = imx_clk_gate2("sai3", "sai3_div", CCM_CCGR1, CCM_CCGRx_CGn(2)); - - clk[VF610_CLK_NFC_SEL] = imx_clk_mux("nfc_sel", CCM_CSCMR1, 12, 2, nfc_sels, 4); - clk[VF610_CLK_NFC_EN] = imx_clk_gate("nfc_en", "nfc_sel", CCM_CSCDR2, 9); - clk[VF610_CLK_NFC_PRE_DIV] = imx_clk_divider("nfc_pre_div", "nfc_en", CCM_CSCDR3, 13, 3); - clk[VF610_CLK_NFC_FRAC_DIV] = imx_clk_divider("nfc_frac_div", "nfc_pre_div", CCM_CSCDR2, 4, 4); - clk[VF610_CLK_NFC] = imx_clk_gate2("nfc", "nfc_frac_div", CCM_CCGR10, CCM_CCGRx_CGn(0)); - - clk[VF610_CLK_GPU_SEL] = imx_clk_mux("gpu_sel", CCM_CSCMR1, 14, 1, gpu_sels, 2); - clk[VF610_CLK_GPU_EN] = imx_clk_gate("gpu_en", "gpu_sel", CCM_CSCDR2, 10); - clk[VF610_CLK_GPU2D] = imx_clk_gate2("gpu", "gpu_en", CCM_CCGR8, CCM_CCGRx_CGn(15)); - - clk[VF610_CLK_VADC_SEL] = imx_clk_mux("vadc_sel", CCM_CSCMR1, 8, 2, vadc_sels, 3); - clk[VF610_CLK_VADC_EN] = imx_clk_gate("vadc_en", "vadc_sel", CCM_CSCDR1, 22); - clk[VF610_CLK_VADC_DIV] = imx_clk_divider("vadc_div", "vadc_en", CCM_CSCDR1, 20, 2); - clk[VF610_CLK_VADC_DIV_HALF] = imx_clk_fixed_factor("vadc_div_half", "vadc_div", 1, 2); - clk[VF610_CLK_VADC] = imx_clk_gate2("vadc", "vadc_div", CCM_CCGR8, CCM_CCGRx_CGn(7)); - - clk[VF610_CLK_ADC0] = imx_clk_gate2("adc0", "ipg_bus", CCM_CCGR1, CCM_CCGRx_CGn(11)); - clk[VF610_CLK_ADC1] = imx_clk_gate2("adc1", "ipg_bus", CCM_CCGR7, CCM_CCGRx_CGn(11)); - clk[VF610_CLK_DAC0] = imx_clk_gate2("dac0", "ipg_bus", CCM_CCGR8, CCM_CCGRx_CGn(12)); - clk[VF610_CLK_DAC1] = imx_clk_gate2("dac1", "ipg_bus", CCM_CCGR8, CCM_CCGRx_CGn(13)); - - clk[VF610_CLK_ASRC] = imx_clk_gate2("asrc", "ipg_bus", CCM_CCGR4, CCM_CCGRx_CGn(1)); - - clk[VF610_CLK_FLEXCAN0_EN] = imx_clk_gate("flexcan0_en", "ipg_bus", CCM_CSCDR2, 11); - clk[VF610_CLK_FLEXCAN0] = imx_clk_gate2("flexcan0", "flexcan0_en", CCM_CCGR0, CCM_CCGRx_CGn(0)); - clk[VF610_CLK_FLEXCAN1_EN] = imx_clk_gate("flexcan1_en", "ipg_bus", CCM_CSCDR2, 12); - clk[VF610_CLK_FLEXCAN1] = imx_clk_gate2("flexcan1", "flexcan1_en", CCM_CCGR9, CCM_CCGRx_CGn(4)); - - clk[VF610_CLK_DMAMUX0] = imx_clk_gate2("dmamux0", "platform_bus", CCM_CCGR0, CCM_CCGRx_CGn(4)); - clk[VF610_CLK_DMAMUX1] = imx_clk_gate2("dmamux1", "platform_bus", CCM_CCGR0, CCM_CCGRx_CGn(5)); - clk[VF610_CLK_DMAMUX2] = imx_clk_gate2("dmamux2", "platform_bus", CCM_CCGR6, CCM_CCGRx_CGn(1)); - clk[VF610_CLK_DMAMUX3] = imx_clk_gate2("dmamux3", "platform_bus", CCM_CCGR6, CCM_CCGRx_CGn(2)); - - clk[VF610_CLK_SNVS] = imx_clk_gate2("snvs-rtc", "ipg_bus", CCM_CCGR6, CCM_CCGRx_CGn(7)); - - imx_check_clocks(clk, ARRAY_SIZE(clk)); - - clk_set_parent(clk[VF610_CLK_QSPI0_SEL], clk[VF610_CLK_PLL1_PFD4]); - clk_set_rate(clk[VF610_CLK_QSPI0_X4_DIV], clk_get_rate(clk[VF610_CLK_QSPI0_SEL]) / 2); - clk_set_rate(clk[VF610_CLK_QSPI0_X2_DIV], clk_get_rate(clk[VF610_CLK_QSPI0_X4_DIV]) / 2); - clk_set_rate(clk[VF610_CLK_QSPI0_X1_DIV], clk_get_rate(clk[VF610_CLK_QSPI0_X2_DIV]) / 2); - - clk_set_parent(clk[VF610_CLK_QSPI1_SEL], clk[VF610_CLK_PLL1_PFD4]); - clk_set_rate(clk[VF610_CLK_QSPI1_X4_DIV], clk_get_rate(clk[VF610_CLK_QSPI1_SEL]) / 2); - clk_set_rate(clk[VF610_CLK_QSPI1_X2_DIV], clk_get_rate(clk[VF610_CLK_QSPI1_X4_DIV]) / 2); - clk_set_rate(clk[VF610_CLK_QSPI1_X1_DIV], clk_get_rate(clk[VF610_CLK_QSPI1_X2_DIV]) / 2); - - clk_set_parent(clk[VF610_CLK_SAI0_SEL], clk[VF610_CLK_AUDIO_EXT]); - clk_set_parent(clk[VF610_CLK_SAI1_SEL], clk[VF610_CLK_AUDIO_EXT]); - clk_set_parent(clk[VF610_CLK_SAI2_SEL], clk[VF610_CLK_AUDIO_EXT]); - clk_set_parent(clk[VF610_CLK_SAI3_SEL], clk[VF610_CLK_AUDIO_EXT]); - - for (i = 0; i < ARRAY_SIZE(clks_init_on); i++) - clk_prepare_enable(clk[clks_init_on[i]]); - - /* Add the clocks to provider list */ - clk_data.clks = clk; - clk_data.clk_num = ARRAY_SIZE(clk); - of_clk_add_provider(np, of_clk_src_onecell_get, &clk_data); -} -CLK_OF_DECLARE(vf610, "fsl,vf610-ccm", vf610_clocks_init); diff --git a/arch/arm/mach-imx/clk.c b/arch/arm/mach-imx/clk.c deleted file mode 100644 index df12b5307..000000000 --- a/arch/arm/mach-imx/clk.c +++ /dev/null @@ -1,75 +0,0 @@ -#include <linux/clk.h> -#include <linux/err.h> -#include <linux/of.h> -#include <linux/slab.h> -#include <linux/spinlock.h> -#include "clk.h" - -DEFINE_SPINLOCK(imx_ccm_lock); - -void __init imx_check_clocks(struct clk *clks[], unsigned int count) -{ - unsigned i; - - for (i = 0; i < count; i++) - if (IS_ERR(clks[i])) - pr_err("i.MX clk %u: register failed with %ld\n", - i, PTR_ERR(clks[i])); -} - -static struct clk * __init imx_obtain_fixed_clock_from_dt(const char *name) -{ - struct of_phandle_args phandle; - struct clk *clk = ERR_PTR(-ENODEV); - char *path; - - path = kasprintf(GFP_KERNEL, "/clocks/%s", name); - if (!path) - return ERR_PTR(-ENOMEM); - - phandle.np = of_find_node_by_path(path); - kfree(path); - - if (phandle.np) { - clk = of_clk_get_from_provider(&phandle); - of_node_put(phandle.np); - } - return clk; -} - -struct clk * __init imx_obtain_fixed_clock( - const char *name, unsigned long rate) -{ - struct clk *clk; - - clk = imx_obtain_fixed_clock_from_dt(name); - if (IS_ERR(clk)) - clk = imx_clk_fixed(name, rate); - return clk; -} - -/* - * This fixups the register CCM_CSCMR1 write value. - * The write/read/divider values of the aclk_podf field - * of that register have the relationship described by - * the following table: - * - * write value read value divider - * 3b'000 3b'110 7 - * 3b'001 3b'111 8 - * 3b'010 3b'100 5 - * 3b'011 3b'101 6 - * 3b'100 3b'010 3 - * 3b'101 3b'011 4 - * 3b'110 3b'000 1 - * 3b'111 3b'001 2(default) - * - * That's why we do the xor operation below. - */ -#define CSCMR1_FIXUP 0x00600000 - -void imx_cscmr1_fixup(u32 *val) -{ - *val ^= CSCMR1_FIXUP; - return; -} diff --git a/arch/arm/mach-imx/clk.h b/arch/arm/mach-imx/clk.h deleted file mode 100644 index 6a07903a2..000000000 --- a/arch/arm/mach-imx/clk.h +++ /dev/null @@ -1,139 +0,0 @@ -#ifndef __MACH_IMX_CLK_H -#define __MACH_IMX_CLK_H - -#include <linux/spinlock.h> -#include <linux/clk-provider.h> - -extern spinlock_t imx_ccm_lock; - -void imx_check_clocks(struct clk *clks[], unsigned int count); - -extern void imx_cscmr1_fixup(u32 *val); - -struct clk *imx_clk_pllv1(const char *name, const char *parent, - void __iomem *base); - -struct clk *imx_clk_pllv2(const char *name, const char *parent, - void __iomem *base); - -enum imx_pllv3_type { - IMX_PLLV3_GENERIC, - IMX_PLLV3_SYS, - IMX_PLLV3_USB, - IMX_PLLV3_USB_VF610, - IMX_PLLV3_AV, - IMX_PLLV3_ENET, -}; - -struct clk *imx_clk_pllv3(enum imx_pllv3_type type, const char *name, - const char *parent_name, void __iomem *base, u32 div_mask); - -struct clk *clk_register_gate2(struct device *dev, const char *name, - const char *parent_name, unsigned long flags, - void __iomem *reg, u8 bit_idx, - u8 clk_gate_flags, spinlock_t *lock, - unsigned int *share_count); - -struct clk * imx_obtain_fixed_clock( - const char *name, unsigned long rate); - -struct clk *imx_clk_gate_exclusive(const char *name, const char *parent, - void __iomem *reg, u8 shift, u32 exclusive_mask); - -static inline struct clk *imx_clk_gate2(const char *name, const char *parent, - void __iomem *reg, u8 shift) -{ - return clk_register_gate2(NULL, name, parent, CLK_SET_RATE_PARENT, reg, - shift, 0, &imx_ccm_lock, NULL); -} - -static inline struct clk *imx_clk_gate2_shared(const char *name, - const char *parent, void __iomem *reg, u8 shift, - unsigned int *share_count) -{ - return clk_register_gate2(NULL, name, parent, CLK_SET_RATE_PARENT, reg, - shift, 0, &imx_ccm_lock, share_count); -} - -struct clk *imx_clk_pfd(const char *name, const char *parent_name, - void __iomem *reg, u8 idx); - -struct clk *imx_clk_busy_divider(const char *name, const char *parent_name, - void __iomem *reg, u8 shift, u8 width, - void __iomem *busy_reg, u8 busy_shift); - -struct clk *imx_clk_busy_mux(const char *name, void __iomem *reg, u8 shift, - u8 width, void __iomem *busy_reg, u8 busy_shift, - const char **parent_names, int num_parents); - -struct clk *imx_clk_fixup_divider(const char *name, const char *parent, - void __iomem *reg, u8 shift, u8 width, - void (*fixup)(u32 *val)); - -struct clk *imx_clk_fixup_mux(const char *name, void __iomem *reg, - u8 shift, u8 width, const char **parents, - int num_parents, void (*fixup)(u32 *val)); - -static inline struct clk *imx_clk_fixed(const char *name, int rate) -{ - return clk_register_fixed_rate(NULL, name, NULL, CLK_IS_ROOT, rate); -} - -static inline struct clk *imx_clk_divider(const char *name, const char *parent, - void __iomem *reg, u8 shift, u8 width) -{ - return clk_register_divider(NULL, name, parent, CLK_SET_RATE_PARENT, - reg, shift, width, 0, &imx_ccm_lock); -} - -static inline struct clk *imx_clk_divider_flags(const char *name, - const char *parent, void __iomem *reg, u8 shift, u8 width, - unsigned long flags) -{ - return clk_register_divider(NULL, name, parent, flags, - reg, shift, width, 0, &imx_ccm_lock); -} - -static inline struct clk *imx_clk_gate(const char *name, const char *parent, - void __iomem *reg, u8 shift) -{ - return clk_register_gate(NULL, name, parent, CLK_SET_RATE_PARENT, reg, - shift, 0, &imx_ccm_lock); -} - -static inline struct clk *imx_clk_gate_dis(const char *name, const char *parent, - void __iomem *reg, u8 shift) -{ - return clk_register_gate(NULL, name, parent, CLK_SET_RATE_PARENT, reg, - shift, CLK_GATE_SET_TO_DISABLE, &imx_ccm_lock); -} - -static inline struct clk *imx_clk_mux(const char *name, void __iomem *reg, - u8 shift, u8 width, const char **parents, int num_parents) -{ - return clk_register_mux(NULL, name, parents, num_parents, - CLK_SET_RATE_NO_REPARENT, reg, shift, - width, 0, &imx_ccm_lock); -} - -static inline struct clk *imx_clk_mux_flags(const char *name, - void __iomem *reg, u8 shift, u8 width, const char **parents, - int num_parents, unsigned long flags) -{ - return clk_register_mux(NULL, name, parents, num_parents, - flags | CLK_SET_RATE_NO_REPARENT, reg, shift, width, 0, - &imx_ccm_lock); -} - -static inline struct clk *imx_clk_fixed_factor(const char *name, - const char *parent, unsigned int mult, unsigned int div) -{ - return clk_register_fixed_factor(NULL, name, parent, - CLK_SET_RATE_PARENT, mult, div); -} - -struct clk *imx_clk_cpu(const char *name, const char *parent_name, - struct clk *div, struct clk *mux, struct clk *pll, - struct clk *step); - -#endif diff --git a/arch/arm/mach-imx/common.h b/arch/arm/mach-imx/common.h index 0f04e30b7..21e4e8697 100644 --- a/arch/arm/mach-imx/common.h +++ b/arch/arm/mach-imx/common.h @@ -44,7 +44,6 @@ void imx27_soc_init(void); void imx31_soc_init(void); void imx35_soc_init(void); void epit_timer_init(void __iomem *base, int irq); -void mxc_timer_init(void __iomem *, int); int mx1_clocks_init(unsigned long fref); int mx21_clocks_init(unsigned long lref, unsigned long fref); int mx27_clocks_init(unsigned long fref); @@ -56,13 +55,10 @@ struct platform_device *mxc_register_gpio(char *name, int id, void mxc_set_cpu_type(unsigned int type); void mxc_restart(enum reboot_mode, const char *); void mxc_arch_reset_init(void __iomem *); -int mx51_revision(void); -int mx53_revision(void); void imx_set_aips(void __iomem *); void imx_aips_allow_unprivileged_access(const char *compat); int mxc_device_init(void); void imx_set_soc_revision(unsigned int rev); -unsigned int imx_get_soc_revision(void); void imx_init_revision_from_anatop(void); struct device *imx_soc_device_init(void); void imx6_enable_rbc(bool enable); @@ -87,7 +83,6 @@ enum mx3_cpu_pwr_mode { }; void mx3_cpu_lp_set(enum mx3_cpu_pwr_mode mode); -void imx_print_silicon_rev(const char *cpu, int srev); void imx_enable_cpu(int cpu, bool enable); void imx_set_cpu_jump(int cpu, void *jump_addr); @@ -111,7 +106,7 @@ void imx_gpc_hwirq_unmask(unsigned int hwirq); void imx_anatop_init(void); void imx_anatop_pre_suspend(void); void imx_anatop_post_resume(void); -int imx6q_set_lpm(enum mxc_cpu_pwr_mode mode); +int imx6_set_lpm(enum mxc_cpu_pwr_mode mode); void imx6q_set_int_mem_clk_lpm(bool enable); void imx6sl_set_wait_clk(bool enter); int imx_mmdc_get_ddr_type(void); @@ -121,26 +116,28 @@ int imx_cpu_kill(unsigned int cpu); #ifdef CONFIG_SUSPEND void v7_cpu_resume(void); +void imx53_suspend(void __iomem *ocram_vbase); +extern const u32 imx53_suspend_sz; void imx6_suspend(void __iomem *ocram_vbase); #else static inline void v7_cpu_resume(void) {} +static inline void imx53_suspend(void __iomem *ocram_vbase) {} +static const u32 imx53_suspend_sz; static inline void imx6_suspend(void __iomem *ocram_vbase) {} #endif +void imx6_pm_ccm_init(const char *ccm_compat); void imx6q_pm_init(void); void imx6dl_pm_init(void); void imx6sl_pm_init(void); void imx6sx_pm_init(void); -void imx6q_pm_set_ccm_base(void __iomem *base); #ifdef CONFIG_PM void imx51_pm_init(void); void imx53_pm_init(void); -void imx5_pm_set_ccm_base(void __iomem *base); #else static inline void imx51_pm_init(void) {} static inline void imx53_pm_init(void) {} -static inline void imx5_pm_set_ccm_base(void __iomem *base) {} #endif #ifdef CONFIG_NEON diff --git a/arch/arm/mach-imx/cpu.c b/arch/arm/mach-imx/cpu.c index df42c14ff..a7fa92a7b 100644 --- a/arch/arm/mach-imx/cpu.c +++ b/arch/arm/mach-imx/cpu.c @@ -130,6 +130,9 @@ struct device * __init imx_soc_device_init(void) case MXC_CPU_IMX6Q: soc_id = "i.MX6Q"; break; + case MXC_CPU_IMX7D: + soc_id = "i.MX7D"; + break; default: soc_id = "Unknown"; } diff --git a/arch/arm/mach-imx/cpuidle-imx6q.c b/arch/arm/mach-imx/cpuidle-imx6q.c index 8e21ccc1e..353bb8774 100644 --- a/arch/arm/mach-imx/cpuidle-imx6q.c +++ b/arch/arm/mach-imx/cpuidle-imx6q.c @@ -27,9 +27,9 @@ static int imx6q_enter_wait(struct cpuidle_device *dev, */ if (!spin_trylock(&master_lock)) goto idle; - imx6q_set_lpm(WAIT_UNCLOCKED); + imx6_set_lpm(WAIT_UNCLOCKED); cpu_do_idle(); - imx6q_set_lpm(WAIT_CLOCKED); + imx6_set_lpm(WAIT_CLOCKED); spin_unlock(&master_lock); goto done; } diff --git a/arch/arm/mach-imx/cpuidle-imx6sl.c b/arch/arm/mach-imx/cpuidle-imx6sl.c index 5742a9fd1..8d866fb67 100644 --- a/arch/arm/mach-imx/cpuidle-imx6sl.c +++ b/arch/arm/mach-imx/cpuidle-imx6sl.c @@ -16,7 +16,7 @@ static int imx6sl_enter_wait(struct cpuidle_device *dev, struct cpuidle_driver *drv, int index) { - imx6q_set_lpm(WAIT_UNCLOCKED); + imx6_set_lpm(WAIT_UNCLOCKED); /* * Software workaround for ERR005311, see function * description for details. @@ -24,7 +24,7 @@ static int imx6sl_enter_wait(struct cpuidle_device *dev, imx6sl_set_wait_clk(true); cpu_do_idle(); imx6sl_set_wait_clk(false); - imx6q_set_lpm(WAIT_CLOCKED); + imx6_set_lpm(WAIT_CLOCKED); return index; } diff --git a/arch/arm/mach-imx/cpuidle-imx6sx.c b/arch/arm/mach-imx/cpuidle-imx6sx.c index 2c9f1a8bf..3c6672b37 100644 --- a/arch/arm/mach-imx/cpuidle-imx6sx.c +++ b/arch/arm/mach-imx/cpuidle-imx6sx.c @@ -25,7 +25,7 @@ static int imx6sx_idle_finish(unsigned long val) static int imx6sx_enter_wait(struct cpuidle_device *dev, struct cpuidle_driver *drv, int index) { - imx6q_set_lpm(WAIT_UNCLOCKED); + imx6_set_lpm(WAIT_UNCLOCKED); switch (index) { case 1: @@ -50,7 +50,7 @@ static int imx6sx_enter_wait(struct cpuidle_device *dev, break; } - imx6q_set_lpm(WAIT_CLOCKED); + imx6_set_lpm(WAIT_CLOCKED); return index; } diff --git a/arch/arm/mach-imx/eukrea_mbimxsd35-baseboard.c b/arch/arm/mach-imx/eukrea_mbimxsd35-baseboard.c deleted file mode 100644 index 6edc940e0..000000000 --- a/arch/arm/mach-imx/eukrea_mbimxsd35-baseboard.c +++ /dev/null @@ -1,318 +0,0 @@ -/* - * Copyright (C) 2010 Eric Benard - eric@eukrea.com - * - * Based on pcm970-baseboard.c which is : - * Copyright (C) 2008 Juergen Beisert (kernel@pengutronix.de) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version 2 - * of the License, or (at your option) any later version. - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, - * MA 02110-1301, USA. - */ - -#include <linux/types.h> -#include <linux/init.h> - -#include <linux/gpio.h> -#include <linux/interrupt.h> -#include <linux/leds.h> -#include <linux/platform_device.h> -#include <linux/input.h> -#include <linux/spi/spi.h> -#include <video/platform_lcd.h> -#include <linux/i2c.h> - -#include <asm/mach-types.h> -#include <asm/mach/arch.h> -#include <asm/mach/time.h> -#include <asm/mach/map.h> - -#include "common.h" -#include "devices-imx35.h" -#include "hardware.h" -#include "iomux-mx35.h" - -static const struct fb_videomode fb_modedb[] = { - { - .name = "CMO-QVGA", - .refresh = 60, - .xres = 320, - .yres = 240, - .pixclock = KHZ2PICOS(6500), - .left_margin = 68, - .right_margin = 20, - .upper_margin = 15, - .lower_margin = 4, - .hsync_len = 30, - .vsync_len = 3, - .sync = 0, - .vmode = FB_VMODE_NONINTERLACED, - .flag = 0, - }, - { - .name = "DVI-VGA", - .refresh = 60, - .xres = 640, - .yres = 480, - .pixclock = 32000, - .left_margin = 100, - .right_margin = 100, - .upper_margin = 7, - .lower_margin = 100, - .hsync_len = 7, - .vsync_len = 7, - .sync = FB_SYNC_VERT_HIGH_ACT | FB_SYNC_HOR_HIGH_ACT | - FB_SYNC_OE_ACT_HIGH | FB_SYNC_CLK_INVERT, - .vmode = FB_VMODE_NONINTERLACED, - .flag = 0, - }, - { - .name = "DVI-SVGA", - .refresh = 60, - .xres = 800, - .yres = 600, - .pixclock = 25000, - .left_margin = 75, - .right_margin = 75, - .upper_margin = 7, - .lower_margin = 75, - .hsync_len = 7, - .vsync_len = 7, - .sync = FB_SYNC_VERT_HIGH_ACT | FB_SYNC_HOR_HIGH_ACT | - FB_SYNC_OE_ACT_HIGH | FB_SYNC_CLK_INVERT, - .vmode = FB_VMODE_NONINTERLACED, - .flag = 0, - }, -}; - -static struct mx3fb_platform_data mx3fb_pdata __initdata = { - .name = "CMO-QVGA", - .mode = fb_modedb, - .num_modes = ARRAY_SIZE(fb_modedb), -}; - -static const iomux_v3_cfg_t eukrea_mbimxsd_pads[] __initconst = { - /* LCD */ - MX35_PAD_LD0__IPU_DISPB_DAT_0, - MX35_PAD_LD1__IPU_DISPB_DAT_1, - MX35_PAD_LD2__IPU_DISPB_DAT_2, - MX35_PAD_LD3__IPU_DISPB_DAT_3, - MX35_PAD_LD4__IPU_DISPB_DAT_4, - MX35_PAD_LD5__IPU_DISPB_DAT_5, - MX35_PAD_LD6__IPU_DISPB_DAT_6, - MX35_PAD_LD7__IPU_DISPB_DAT_7, - MX35_PAD_LD8__IPU_DISPB_DAT_8, - MX35_PAD_LD9__IPU_DISPB_DAT_9, - MX35_PAD_LD10__IPU_DISPB_DAT_10, - MX35_PAD_LD11__IPU_DISPB_DAT_11, - MX35_PAD_LD12__IPU_DISPB_DAT_12, - MX35_PAD_LD13__IPU_DISPB_DAT_13, - MX35_PAD_LD14__IPU_DISPB_DAT_14, - MX35_PAD_LD15__IPU_DISPB_DAT_15, - MX35_PAD_LD16__IPU_DISPB_DAT_16, - MX35_PAD_LD17__IPU_DISPB_DAT_17, - MX35_PAD_D3_HSYNC__IPU_DISPB_D3_HSYNC, - MX35_PAD_D3_FPSHIFT__IPU_DISPB_D3_CLK, - MX35_PAD_D3_DRDY__IPU_DISPB_D3_DRDY, - MX35_PAD_D3_VSYNC__IPU_DISPB_D3_VSYNC, - /* Backlight */ - MX35_PAD_CONTRAST__IPU_DISPB_CONTR, - /* LCD_PWR */ - MX35_PAD_D3_CLS__GPIO1_4, - /* LED */ - MX35_PAD_LD23__GPIO3_29, - /* SWITCH */ - MX35_PAD_LD19__GPIO3_25, - /* UART2 */ - MX35_PAD_CTS2__UART2_CTS, - MX35_PAD_RTS2__UART2_RTS, - MX35_PAD_TXD2__UART2_TXD_MUX, - MX35_PAD_RXD2__UART2_RXD_MUX, - /* I2S */ - MX35_PAD_STXFS4__AUDMUX_AUD4_TXFS, - MX35_PAD_STXD4__AUDMUX_AUD4_TXD, - MX35_PAD_SRXD4__AUDMUX_AUD4_RXD, - MX35_PAD_SCK4__AUDMUX_AUD4_TXC, - /* CAN2 */ - MX35_PAD_TX5_RX0__CAN2_TXCAN, - MX35_PAD_TX4_RX1__CAN2_RXCAN, - /* SDCARD */ - MX35_PAD_SD1_CMD__ESDHC1_CMD, - MX35_PAD_SD1_CLK__ESDHC1_CLK, - MX35_PAD_SD1_DATA0__ESDHC1_DAT0, - MX35_PAD_SD1_DATA1__ESDHC1_DAT1, - MX35_PAD_SD1_DATA2__ESDHC1_DAT2, - MX35_PAD_SD1_DATA3__ESDHC1_DAT3, - /* SD1 CD */ - MX35_PAD_LD18__GPIO3_24, - /* SPI */ - MX35_PAD_CSPI1_MOSI__CSPI1_MOSI, - MX35_PAD_CSPI1_MISO__CSPI1_MISO, - MX35_PAD_CSPI1_SS0__GPIO1_18, - MX35_PAD_CSPI1_SS1__GPIO1_19, - MX35_PAD_CSPI1_SCLK__CSPI1_SCLK, - MX35_PAD_CSPI1_SPI_RDY__GPIO3_5, -}; - -#define GPIO_LED1 IMX_GPIO_NR(3, 29) -#define GPIO_SWITCH1 IMX_GPIO_NR(3, 25) -#define GPIO_LCDPWR IMX_GPIO_NR(1, 4) -#define GPIO_SD1CD IMX_GPIO_NR(3, 24) -#define GPIO_SPI1_SS0 IMX_GPIO_NR(1, 18) -#define GPIO_SPI1_SS1 IMX_GPIO_NR(1, 19) -#define GPIO_SPI1_IRQ IMX_GPIO_NR(3, 5) - -static void eukrea_mbimxsd_lcd_power_set(struct plat_lcd_data *pd, - unsigned int power) -{ - if (power) - gpio_direction_output(GPIO_LCDPWR, 1); - else - gpio_direction_output(GPIO_LCDPWR, 0); -} - -static struct plat_lcd_data eukrea_mbimxsd_lcd_power_data = { - .set_power = eukrea_mbimxsd_lcd_power_set, -}; - -static struct platform_device eukrea_mbimxsd_lcd_powerdev = { - .name = "platform-lcd", - .dev.platform_data = &eukrea_mbimxsd_lcd_power_data, -}; - -static struct gpio_led eukrea_mbimxsd_leds[] = { - { - .name = "led1", - .default_trigger = "heartbeat", - .active_low = 1, - .gpio = GPIO_LED1, - }, -}; - -static const struct gpio_led_platform_data - eukrea_mbimxsd_led_info __initconst = { - .leds = eukrea_mbimxsd_leds, - .num_leds = ARRAY_SIZE(eukrea_mbimxsd_leds), -}; - -static struct gpio_keys_button eukrea_mbimxsd_gpio_buttons[] = { - { - .gpio = GPIO_SWITCH1, - .code = BTN_0, - .desc = "BP1", - .active_low = 1, - .wakeup = 1, - }, -}; - -static const struct gpio_keys_platform_data - eukrea_mbimxsd_button_data __initconst = { - .buttons = eukrea_mbimxsd_gpio_buttons, - .nbuttons = ARRAY_SIZE(eukrea_mbimxsd_gpio_buttons), -}; - -static struct platform_device *platform_devices[] __initdata = { - &eukrea_mbimxsd_lcd_powerdev, -}; - -static const struct imxuart_platform_data uart_pdata __initconst = { - .flags = IMXUART_HAVE_RTSCTS, -}; - -static struct i2c_board_info eukrea_mbimxsd_i2c_devices[] = { - { - I2C_BOARD_INFO("tlv320aic23", 0x1a), - }, -}; - -static const -struct imx_ssi_platform_data eukrea_mbimxsd_ssi_pdata __initconst = { - .flags = IMX_SSI_SYN | IMX_SSI_NET | IMX_SSI_USE_I2S_SLAVE, -}; - -static struct esdhc_platform_data sd1_pdata = { - .cd_gpio = GPIO_SD1CD, - .cd_type = ESDHC_CD_GPIO, - .wp_type = ESDHC_WP_NONE, -}; - -static struct spi_board_info eukrea_mbimxsd35_spi_board_info[] __initdata = { - { - .modalias = "spidev", - .max_speed_hz = 20000000, - .bus_num = 0, - .chip_select = 0, - .mode = SPI_MODE_0, - }, - { - .modalias = "spidev", - .max_speed_hz = 20000000, - .bus_num = 0, - .chip_select = 1, - .mode = SPI_MODE_0, - }, -}; - -static int eukrea_mbimxsd35_spi_cs[] = {GPIO_SPI1_SS0, GPIO_SPI1_SS1}; - -static const struct spi_imx_master eukrea_mbimxsd35_spi0_data __initconst = { - .chipselect = eukrea_mbimxsd35_spi_cs, - .num_chipselect = ARRAY_SIZE(eukrea_mbimxsd35_spi_cs), -}; - -/* - * system init for baseboard usage. Will be called by cpuimx35 init. - * - * Add platform devices present on this baseboard and init - * them from CPU side as far as required to use them later on - */ -void __init eukrea_mbimxsd35_baseboard_init(void) -{ - if (mxc_iomux_v3_setup_multiple_pads(eukrea_mbimxsd_pads, - ARRAY_SIZE(eukrea_mbimxsd_pads))) - printk(KERN_ERR "error setting mbimxsd pads !\n"); - - imx35_add_imx_uart1(&uart_pdata); - imx35_add_ipu_core(); - imx35_add_mx3_sdc_fb(&mx3fb_pdata); - - imx35_add_imx_ssi(0, &eukrea_mbimxsd_ssi_pdata); - - imx35_add_flexcan1(); - imx35_add_sdhci_esdhc_imx(0, &sd1_pdata); - - gpio_request(GPIO_LED1, "LED1"); - gpio_direction_output(GPIO_LED1, 1); - gpio_free(GPIO_LED1); - - gpio_request(GPIO_SWITCH1, "SWITCH1"); - gpio_direction_input(GPIO_SWITCH1); - gpio_free(GPIO_SWITCH1); - - gpio_request(GPIO_LCDPWR, "LCDPWR"); - gpio_direction_output(GPIO_LCDPWR, 1); - - i2c_register_board_info(0, eukrea_mbimxsd_i2c_devices, - ARRAY_SIZE(eukrea_mbimxsd_i2c_devices)); - - gpio_request(GPIO_SPI1_IRQ, "SPI1_IRQ"); - gpio_direction_input(GPIO_SPI1_IRQ); - gpio_free(GPIO_SPI1_IRQ); - imx35_add_spi_imx0(&eukrea_mbimxsd35_spi0_data); - spi_register_board_info(eukrea_mbimxsd35_spi_board_info, - ARRAY_SIZE(eukrea_mbimxsd35_spi_board_info)); - - platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices)); - gpio_led_register_device(-1, &eukrea_mbimxsd_led_info); - imx_add_gpio_keys(&eukrea_mbimxsd_button_data); - imx_add_platform_device("eukrea_tlv320", 0, NULL, 0, NULL, 0); -} diff --git a/arch/arm/mach-imx/gpc.c b/arch/arm/mach-imx/gpc.c index 78b6fd0b8..8c4467fad 100644 --- a/arch/arm/mach-imx/gpc.c +++ b/arch/arm/mach-imx/gpc.c @@ -227,7 +227,7 @@ static int imx_gpc_domain_alloc(struct irq_domain *domain, return irq_domain_alloc_irqs_parent(domain, irq, nr_irqs, &parent_args); } -static struct irq_domain_ops imx_gpc_domain_ops = { +static const struct irq_domain_ops imx_gpc_domain_ops = { .xlate = imx_gpc_domain_xlate, .alloc = imx_gpc_domain_alloc, .free = irq_domain_free_irqs_common, @@ -459,7 +459,6 @@ static const struct of_device_id imx_gpc_dt_ids[] = { static struct platform_driver imx_gpc_driver = { .driver = { .name = "imx-gpc", - .owner = THIS_MODULE, .of_match_table = imx_gpc_dt_ids, }, .probe = imx_gpc_probe, diff --git a/arch/arm/mach-imx/hardware.h b/arch/arm/mach-imx/hardware.h index 76af2c03c..d737f95eb 100644 --- a/arch/arm/mach-imx/hardware.h +++ b/arch/arm/mach-imx/hardware.h @@ -22,6 +22,7 @@ #ifndef __ASSEMBLY__ #include <asm/io.h> +#include <soc/imx/revision.h> #endif #include <asm/sizes.h> diff --git a/arch/arm/mach-imx/headsmp.S b/arch/arm/mach-imx/headsmp.S index de5047c8a..b5e976816 100644 --- a/arch/arm/mach-imx/headsmp.S +++ b/arch/arm/mach-imx/headsmp.S @@ -25,7 +25,6 @@ diag_reg_offset: .endm ENTRY(v7_secondary_startup) - bl v7_invalidate_l1 set_diag_reg b secondary_startup ENDPROC(v7_secondary_startup) diff --git a/arch/arm/mach-imx/iomux-imx31.c b/arch/arm/mach-imx/iomux-imx31.c index d6a30753c..6dd22cabf 100644 --- a/arch/arm/mach-imx/iomux-imx31.c +++ b/arch/arm/mach-imx/iomux-imx31.c @@ -40,7 +40,7 @@ static DEFINE_SPINLOCK(gpio_mux_lock); #define IOMUX_REG_MASK (IOMUX_PADNUM_MASK & ~0x3) -static unsigned long mxc_pin_alloc_map[NB_PORTS * 32 / BITS_PER_LONG]; +static DECLARE_BITMAP(mxc_pin_alloc_map, NB_PORTS * 32); /* * set the mode for a IOMUX pin. */ diff --git a/arch/arm/mach-imx/mach-cpuimx35.c b/arch/arm/mach-imx/mach-cpuimx35.c deleted file mode 100644 index 922ffd6ca..000000000 --- a/arch/arm/mach-imx/mach-cpuimx35.c +++ /dev/null @@ -1,206 +0,0 @@ -/* - * Copyright (C) 2010 Eric Benard - eric@eukrea.com - * Copyright (C) 2009 Sascha Hauer, Pengutronix - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ - -#include <linux/types.h> -#include <linux/init.h> - -#include <linux/platform_device.h> -#include <linux/mtd/physmap.h> -#include <linux/memory.h> -#include <linux/gpio.h> -#include <linux/interrupt.h> -#include <linux/delay.h> -#include <linux/i2c.h> -#include <linux/i2c/tsc2007.h> -#include <linux/usb/otg.h> -#include <linux/usb/ulpi.h> -#include <linux/i2c-gpio.h> - -#include <asm/mach-types.h> -#include <asm/mach/arch.h> -#include <asm/mach/time.h> -#include <asm/mach/map.h> - -#include "common.h" -#include "devices-imx35.h" -#include "ehci.h" -#include "eukrea-baseboards.h" -#include "hardware.h" -#include "iomux-mx35.h" - -static const struct imxuart_platform_data uart_pdata __initconst = { - .flags = IMXUART_HAVE_RTSCTS, -}; - -static const struct imxi2c_platform_data - eukrea_cpuimx35_i2c0_data __initconst = { - .bitrate = 100000, -}; - -#define TSC2007_IRQGPIO IMX_GPIO_NR(3, 2) -static int tsc2007_get_pendown_state(struct device *dev) -{ - return !gpio_get_value(TSC2007_IRQGPIO); -} - -static struct tsc2007_platform_data tsc2007_info = { - .model = 2007, - .x_plate_ohms = 180, - .get_pendown_state = tsc2007_get_pendown_state, -}; - -static struct i2c_board_info eukrea_cpuimx35_i2c_devices[] = { - { - I2C_BOARD_INFO("pcf8563", 0x51), - }, { - I2C_BOARD_INFO("tsc2007", 0x48), - .platform_data = &tsc2007_info, - /* irq number is run-time assigned */ - }, -}; - -static const iomux_v3_cfg_t eukrea_cpuimx35_pads[] __initconst = { - /* UART1 */ - MX35_PAD_CTS1__UART1_CTS, - MX35_PAD_RTS1__UART1_RTS, - MX35_PAD_TXD1__UART1_TXD_MUX, - MX35_PAD_RXD1__UART1_RXD_MUX, - /* FEC */ - MX35_PAD_FEC_TX_CLK__FEC_TX_CLK, - MX35_PAD_FEC_RX_CLK__FEC_RX_CLK, - MX35_PAD_FEC_RX_DV__FEC_RX_DV, - MX35_PAD_FEC_COL__FEC_COL, - MX35_PAD_FEC_RDATA0__FEC_RDATA_0, - MX35_PAD_FEC_TDATA0__FEC_TDATA_0, - MX35_PAD_FEC_TX_EN__FEC_TX_EN, - MX35_PAD_FEC_MDC__FEC_MDC, - MX35_PAD_FEC_MDIO__FEC_MDIO, - MX35_PAD_FEC_TX_ERR__FEC_TX_ERR, - MX35_PAD_FEC_RX_ERR__FEC_RX_ERR, - MX35_PAD_FEC_CRS__FEC_CRS, - MX35_PAD_FEC_RDATA1__FEC_RDATA_1, - MX35_PAD_FEC_TDATA1__FEC_TDATA_1, - MX35_PAD_FEC_RDATA2__FEC_RDATA_2, - MX35_PAD_FEC_TDATA2__FEC_TDATA_2, - MX35_PAD_FEC_RDATA3__FEC_RDATA_3, - MX35_PAD_FEC_TDATA3__FEC_TDATA_3, - /* I2C1 */ - MX35_PAD_I2C1_CLK__I2C1_SCL, - MX35_PAD_I2C1_DAT__I2C1_SDA, - /* TSC2007 IRQ */ - MX35_PAD_ATA_DA2__GPIO3_2, -}; - -static const struct mxc_nand_platform_data - eukrea_cpuimx35_nand_board_info __initconst = { - .width = 1, - .hw_ecc = 1, - .flash_bbt = 1, -}; - -static int eukrea_cpuimx35_otg_init(struct platform_device *pdev) -{ - return mx35_initialize_usb_hw(pdev->id, MXC_EHCI_INTERFACE_DIFF_UNI); -} - -static const struct mxc_usbh_platform_data otg_pdata __initconst = { - .init = eukrea_cpuimx35_otg_init, - .portsc = MXC_EHCI_MODE_UTMI, -}; - -static int eukrea_cpuimx35_usbh1_init(struct platform_device *pdev) -{ - return mx35_initialize_usb_hw(pdev->id, MXC_EHCI_INTERFACE_SINGLE_UNI | - MXC_EHCI_INTERNAL_PHY | MXC_EHCI_IPPUE_DOWN); -} - -static const struct mxc_usbh_platform_data usbh1_pdata __initconst = { - .init = eukrea_cpuimx35_usbh1_init, - .portsc = MXC_EHCI_MODE_SERIAL, -}; - -static const struct fsl_usb2_platform_data otg_device_pdata __initconst = { - .operating_mode = FSL_USB2_DR_DEVICE, - .phy_mode = FSL_USB2_PHY_UTMI, - .workaround = FLS_USB2_WORKAROUND_ENGCM09152, -}; - -static bool otg_mode_host __initdata; - -static int __init eukrea_cpuimx35_otg_mode(char *options) -{ - if (!strcmp(options, "host")) - otg_mode_host = true; - else if (!strcmp(options, "device")) - otg_mode_host = false; - else - pr_info("otg_mode neither \"host\" nor \"device\". " - "Defaulting to device\n"); - return 1; -} -__setup("otg_mode=", eukrea_cpuimx35_otg_mode); - -/* - * Board specific initialization. - */ -static void __init eukrea_cpuimx35_init(void) -{ - imx35_soc_init(); - - mxc_iomux_v3_setup_multiple_pads(eukrea_cpuimx35_pads, - ARRAY_SIZE(eukrea_cpuimx35_pads)); - - imx35_add_fec(NULL); - imx35_add_imx2_wdt(); - - imx35_add_imx_uart0(&uart_pdata); - imx35_add_mxc_nand(&eukrea_cpuimx35_nand_board_info); - - eukrea_cpuimx35_i2c_devices[1].irq = gpio_to_irq(TSC2007_IRQGPIO); - i2c_register_board_info(0, eukrea_cpuimx35_i2c_devices, - ARRAY_SIZE(eukrea_cpuimx35_i2c_devices)); - imx35_add_imx_i2c0(&eukrea_cpuimx35_i2c0_data); - - if (otg_mode_host) - imx35_add_mxc_ehci_otg(&otg_pdata); - else - imx35_add_fsl_usb2_udc(&otg_device_pdata); - - imx35_add_mxc_ehci_hs(&usbh1_pdata); - -#ifdef CONFIG_MACH_EUKREA_MBIMXSD35_BASEBOARD - eukrea_mbimxsd35_baseboard_init(); -#endif -} - -static void __init eukrea_cpuimx35_timer_init(void) -{ - mx35_clocks_init(); -} - -MACHINE_START(EUKREA_CPUIMX35SD, "Eukrea CPUIMX35") - /* Maintainer: Eukrea Electromatique */ - .atag_offset = 0x100, - .map_io = mx35_map_io, - .init_early = imx35_init_early, - .init_irq = mx35_init_irq, - .init_time = eukrea_cpuimx35_timer_init, - .init_machine = eukrea_cpuimx35_init, - .restart = mxc_restart, -MACHINE_END diff --git a/arch/arm/mach-imx/mach-imx6q.c b/arch/arm/mach-imx/mach-imx6q.c index 3ab61549c..9602cc12d 100644 --- a/arch/arm/mach-imx/mach-imx6q.c +++ b/arch/arm/mach-imx/mach-imx6q.c @@ -393,6 +393,7 @@ static void __init imx6q_init_irq(void) imx_init_l2cache(); imx_src_init(); irqchip_init(); + imx6_pm_ccm_init("fsl,imx6q-ccm"); } static const char * const imx6q_dt_compat[] __initconst = { diff --git a/arch/arm/mach-imx/mach-imx6sl.c b/arch/arm/mach-imx/mach-imx6sl.c index 12a1b098f..300326373 100644 --- a/arch/arm/mach-imx/mach-imx6sl.c +++ b/arch/arm/mach-imx/mach-imx6sl.c @@ -66,6 +66,7 @@ static void __init imx6sl_init_irq(void) imx_init_l2cache(); imx_src_init(); irqchip_init(); + imx6_pm_ccm_init("fsl,imx6sl-ccm"); } static const char * const imx6sl_dt_compat[] __initconst = { diff --git a/arch/arm/mach-imx/mach-imx6sx.c b/arch/arm/mach-imx/mach-imx6sx.c index f17b7004c..6a0b0614d 100644 --- a/arch/arm/mach-imx/mach-imx6sx.c +++ b/arch/arm/mach-imx/mach-imx6sx.c @@ -86,6 +86,7 @@ static void __init imx6sx_init_irq(void) imx_init_l2cache(); imx_src_init(); irqchip_init(); + imx6_pm_ccm_init("fsl,imx6sx-ccm"); } static void __init imx6sx_init_late(void) diff --git a/arch/arm/mach-imx/mach-imx7d.c b/arch/arm/mach-imx/mach-imx7d.c new file mode 100644 index 000000000..4d4a19099 --- /dev/null +++ b/arch/arm/mach-imx/mach-imx7d.c @@ -0,0 +1,43 @@ +/* + * Copyright (C) 2015 Freescale Semiconductor, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#include <linux/irqchip.h> +#include <linux/of_platform.h> +#include <asm/mach/arch.h> +#include <asm/mach/map.h> + +#include "common.h" + +static void __init imx7d_init_machine(void) +{ + struct device *parent; + + parent = imx_soc_device_init(); + if (parent == NULL) + pr_warn("failed to initialize soc device\n"); + + of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL); + imx_anatop_init(); +} + +static void __init imx7d_init_irq(void) +{ + imx_init_revision_from_anatop(); + imx_src_init(); + irqchip_init(); +} + +static const char *imx7d_dt_compat[] __initconst = { + "fsl,imx7d", + NULL, +}; + +DT_MACHINE_START(IMX7D, "Freescale i.MX7 Dual (Device Tree)") + .init_irq = imx7d_init_irq, + .init_machine = imx7d_init_machine, + .dt_compat = imx7d_dt_compat, +MACHINE_END diff --git a/arch/arm/mach-imx/mach-vf610.c b/arch/arm/mach-imx/mach-vf610.c index 2e7c75b66..b20f6c14e 100644 --- a/arch/arm/mach-imx/mach-vf610.c +++ b/arch/arm/mach-imx/mach-vf610.c @@ -17,6 +17,7 @@ static const char * const vf610_dt_compat[] __initconst = { "fsl,vf510", "fsl,vf600", "fsl,vf610", + "fsl,vf610m4", NULL, }; diff --git a/arch/arm/mach-imx/mmdc.c b/arch/arm/mach-imx/mmdc.c index 0411f0664..db9621c71 100644 --- a/arch/arm/mach-imx/mmdc.c +++ b/arch/arm/mach-imx/mmdc.c @@ -17,6 +17,8 @@ #include <linux/of_address.h> #include <linux/of_device.h> +#include "common.h" + #define MMDC_MAPSR 0x404 #define BP_MMDC_MAPSR_PSD 0 #define BP_MMDC_MAPSR_PSS 4 diff --git a/arch/arm/mach-imx/mx27.h b/arch/arm/mach-imx/mx27.h index 8a65f192e..f96bb2642 100644 --- a/arch/arm/mach-imx/mx27.h +++ b/arch/arm/mach-imx/mx27.h @@ -231,8 +231,4 @@ #define MX27_DMA_REQ_SDHC3 36 #define MX27_DMA_REQ_NFC 37 -#ifndef __ASSEMBLY__ -extern int mx27_revision(void); -#endif - #endif /* ifndef __MACH_MX27_H__ */ diff --git a/arch/arm/mach-imx/mx3x.h b/arch/arm/mach-imx/mx3x.h index 96fb4fbc8..6fec6114c 100644 --- a/arch/arm/mach-imx/mx3x.h +++ b/arch/arm/mach-imx/mx3x.h @@ -185,11 +185,4 @@ #define MX3x_PROD_SIGNATURE 0x1 /* For MX31 */ -/* Mandatory defines used globally */ - -#if !defined(__ASSEMBLY__) && !defined(__MXC_BOOT_UNCOMPRESS) -extern int mx35_revision(void); -extern int mx31_revision(void); -#endif - #endif /* ifndef __MACH_MX3x_H__ */ diff --git a/arch/arm/mach-imx/mxc.h b/arch/arm/mach-imx/mxc.h index 4c1343df2..c4436d4fd 100644 --- a/arch/arm/mach-imx/mxc.h +++ b/arch/arm/mach-imx/mxc.h @@ -1,5 +1,5 @@ /* - * Copyright 2004-2007, 2010 Freescale Semiconductor, Inc. All Rights Reserved. + * Copyright 2004-2007, 2010-2015 Freescale Semiconductor, Inc. * Copyright (C) 2008 Juergen Beisert (kernel@pengutronix.de) * * This program is free software; you can redistribute it and/or @@ -38,22 +38,7 @@ #define MXC_CPU_IMX6DL 0x61 #define MXC_CPU_IMX6SX 0x62 #define MXC_CPU_IMX6Q 0x63 - -#define IMX_CHIP_REVISION_1_0 0x10 -#define IMX_CHIP_REVISION_1_1 0x11 -#define IMX_CHIP_REVISION_1_2 0x12 -#define IMX_CHIP_REVISION_1_3 0x13 -#define IMX_CHIP_REVISION_1_4 0x14 -#define IMX_CHIP_REVISION_1_5 0x15 -#define IMX_CHIP_REVISION_2_0 0x20 -#define IMX_CHIP_REVISION_2_1 0x21 -#define IMX_CHIP_REVISION_2_2 0x22 -#define IMX_CHIP_REVISION_2_3 0x23 -#define IMX_CHIP_REVISION_3_0 0x30 -#define IMX_CHIP_REVISION_3_1 0x31 -#define IMX_CHIP_REVISION_3_2 0x32 -#define IMX_CHIP_REVISION_3_3 0x33 -#define IMX_CHIP_REVISION_UNKNOWN 0xff +#define MXC_CPU_IMX7D 0x72 #define IMX_DDR_TYPE_LPDDR2 1 @@ -185,6 +170,11 @@ static inline bool cpu_is_imx6q(void) return __mxc_cpu_type == MXC_CPU_IMX6Q; } +static inline bool cpu_is_imx7d(void) +{ + return __mxc_cpu_type == MXC_CPU_IMX7D; +} + struct cpu_op { u32 cpu_rate; }; diff --git a/arch/arm/mach-imx/pm-imx5.c b/arch/arm/mach-imx/pm-imx5.c index f1f80ab73..1885676c2 100644 --- a/arch/arm/mach-imx/pm-imx5.c +++ b/arch/arm/mach-imx/pm-imx5.c @@ -13,7 +13,14 @@ #include <linux/io.h> #include <linux/err.h> #include <linux/export.h> + +#include <linux/genalloc.h> +#include <linux/of.h> +#include <linux/of_address.h> +#include <linux/of_platform.h> + #include <asm/cacheflush.h> +#include <asm/fncpy.h> #include <asm/system_misc.h> #include <asm/tlbflush.h> @@ -49,29 +56,91 @@ */ #define IMX5_DEFAULT_CPU_IDLE_STATE WAIT_UNCLOCKED_POWER_OFF +struct imx5_suspend_io_state { + u32 offset; + u32 clear; + u32 set; + u32 saved_value; +}; + struct imx5_pm_data { + phys_addr_t ccm_addr; phys_addr_t cortex_addr; phys_addr_t gpc_addr; + phys_addr_t m4if_addr; + phys_addr_t iomuxc_addr; + void (*suspend_asm)(void __iomem *ocram_vbase); + const u32 *suspend_asm_sz; + const struct imx5_suspend_io_state *suspend_io_config; + int suspend_io_count; +}; + +static const struct imx5_suspend_io_state imx53_suspend_io_config[] = { +#define MX53_DSE_HIGHZ_MASK (0x7 << 19) + {.offset = 0x584, .clear = MX53_DSE_HIGHZ_MASK}, /* DQM0 */ + {.offset = 0x594, .clear = MX53_DSE_HIGHZ_MASK}, /* DQM1 */ + {.offset = 0x560, .clear = MX53_DSE_HIGHZ_MASK}, /* DQM2 */ + {.offset = 0x554, .clear = MX53_DSE_HIGHZ_MASK}, /* DQM3 */ + {.offset = 0x574, .clear = MX53_DSE_HIGHZ_MASK}, /* CAS */ + {.offset = 0x588, .clear = MX53_DSE_HIGHZ_MASK}, /* RAS */ + {.offset = 0x578, .clear = MX53_DSE_HIGHZ_MASK}, /* SDCLK_0 */ + {.offset = 0x570, .clear = MX53_DSE_HIGHZ_MASK}, /* SDCLK_1 */ + + {.offset = 0x580, .clear = MX53_DSE_HIGHZ_MASK}, /* SDODT0 */ + {.offset = 0x564, .clear = MX53_DSE_HIGHZ_MASK}, /* SDODT1 */ + {.offset = 0x57c, .clear = MX53_DSE_HIGHZ_MASK}, /* SDQS0 */ + {.offset = 0x590, .clear = MX53_DSE_HIGHZ_MASK}, /* SDQS1 */ + {.offset = 0x568, .clear = MX53_DSE_HIGHZ_MASK}, /* SDQS2 */ + {.offset = 0x558, .clear = MX53_DSE_HIGHZ_MASK}, /* SDSQ3 */ + {.offset = 0x6f0, .clear = MX53_DSE_HIGHZ_MASK}, /* GRP_ADDS */ + {.offset = 0x718, .clear = MX53_DSE_HIGHZ_MASK}, /* GRP_BODS */ + {.offset = 0x71c, .clear = MX53_DSE_HIGHZ_MASK}, /* GRP_B1DS */ + {.offset = 0x728, .clear = MX53_DSE_HIGHZ_MASK}, /* GRP_B2DS */ + {.offset = 0x72c, .clear = MX53_DSE_HIGHZ_MASK}, /* GRP_B3DS */ + + /* Controls the CKE signal which is required to leave self refresh */ + {.offset = 0x720, .clear = MX53_DSE_HIGHZ_MASK, .set = 1 << 19}, /* CTLDS */ }; static const struct imx5_pm_data imx51_pm_data __initconst = { + .ccm_addr = 0x73fd4000, .cortex_addr = 0x83fa0000, .gpc_addr = 0x73fd8000, }; static const struct imx5_pm_data imx53_pm_data __initconst = { + .ccm_addr = 0x53fd4000, .cortex_addr = 0x63fa0000, .gpc_addr = 0x53fd8000, + .m4if_addr = 0x63fd8000, + .iomuxc_addr = 0x53fa8000, + .suspend_asm = &imx53_suspend, + .suspend_asm_sz = &imx53_suspend_sz, + .suspend_io_config = imx53_suspend_io_config, + .suspend_io_count = ARRAY_SIZE(imx53_suspend_io_config), }; +#define MX5_MAX_SUSPEND_IOSTATE ARRAY_SIZE(imx53_suspend_io_config) + +/* + * This structure is for passing necessary data for low level ocram + * suspend code(arch/arm/mach-imx/suspend-imx53.S), if this struct + * definition is changed, the offset definition in that file + * must be also changed accordingly otherwise, the suspend to ocram + * function will be broken! + */ +struct imx5_cpu_suspend_info { + void __iomem *m4if_base; + void __iomem *iomuxc_base; + u32 io_count; + struct imx5_suspend_io_state io_state[MX5_MAX_SUSPEND_IOSTATE]; +} __aligned(8); + static void __iomem *ccm_base; static void __iomem *cortex_base; static void __iomem *gpc_base; - -void __init imx5_pm_set_ccm_base(void __iomem *base) -{ - ccm_base = base; -} +static void __iomem *suspend_ocram_base; +static void (*imx5_suspend_in_ocram_fn)(void __iomem *ocram_vbase); /* * set cpu low power mode before WFI instruction. This function is called @@ -161,8 +230,15 @@ static int mx5_suspend_enter(suspend_state_t state) /*clear the EMPGC0/1 bits */ __raw_writel(0, gpc_base + MXC_SRPG_EMPGC0_SRPGCR); __raw_writel(0, gpc_base + MXC_SRPG_EMPGC1_SRPGCR); + + if (imx5_suspend_in_ocram_fn) + imx5_suspend_in_ocram_fn(suspend_ocram_base); + else + cpu_do_idle(); + + } else { + cpu_do_idle(); } - cpu_do_idle(); /* return registers to default idle state */ mx5_cpu_lp_set(IMX5_DEFAULT_CPU_IDLE_STATE); @@ -194,6 +270,111 @@ static void imx5_pm_idle(void) imx5_cpu_do_idle(); } +static int __init imx_suspend_alloc_ocram( + size_t size, + void __iomem **virt_out, + phys_addr_t *phys_out) +{ + struct device_node *node; + struct platform_device *pdev; + struct gen_pool *ocram_pool; + unsigned long ocram_base; + void __iomem *virt; + phys_addr_t phys; + int ret = 0; + + /* Copied from imx6: TODO factorize */ + node = of_find_compatible_node(NULL, NULL, "mmio-sram"); + if (!node) { + pr_warn("%s: failed to find ocram node!\n", __func__); + return -ENODEV; + } + + pdev = of_find_device_by_node(node); + if (!pdev) { + pr_warn("%s: failed to find ocram device!\n", __func__); + ret = -ENODEV; + goto put_node; + } + + ocram_pool = gen_pool_get(&pdev->dev); + if (!ocram_pool) { + pr_warn("%s: ocram pool unavailable!\n", __func__); + ret = -ENODEV; + goto put_node; + } + + ocram_base = gen_pool_alloc(ocram_pool, size); + if (!ocram_base) { + pr_warn("%s: unable to alloc ocram!\n", __func__); + ret = -ENOMEM; + goto put_node; + } + + phys = gen_pool_virt_to_phys(ocram_pool, ocram_base); + virt = __arm_ioremap_exec(phys, size, false); + if (phys_out) + *phys_out = phys; + if (virt_out) + *virt_out = virt; + +put_node: + of_node_put(node); + + return ret; +} + +static int __init imx5_suspend_init(const struct imx5_pm_data *soc_data) +{ + struct imx5_cpu_suspend_info *suspend_info; + int ret; + /* Need this to avoid compile error due to const typeof in fncpy.h */ + void (*suspend_asm)(void __iomem *) = soc_data->suspend_asm; + + if (!suspend_asm) + return 0; + + if (!soc_data->suspend_asm_sz || !*soc_data->suspend_asm_sz) + return -EINVAL; + + ret = imx_suspend_alloc_ocram( + *soc_data->suspend_asm_sz + sizeof(*suspend_info), + &suspend_ocram_base, NULL); + if (ret) + return ret; + + suspend_info = suspend_ocram_base; + + suspend_info->io_count = soc_data->suspend_io_count; + memcpy(suspend_info->io_state, soc_data->suspend_io_config, + sizeof(*suspend_info->io_state) * soc_data->suspend_io_count); + + suspend_info->m4if_base = ioremap(soc_data->m4if_addr, SZ_16K); + if (!suspend_info->m4if_base) { + ret = -ENOMEM; + goto failed_map_m4if; + } + + suspend_info->iomuxc_base = ioremap(soc_data->iomuxc_addr, SZ_16K); + if (!suspend_info->iomuxc_base) { + ret = -ENOMEM; + goto failed_map_iomuxc; + } + + imx5_suspend_in_ocram_fn = fncpy( + suspend_ocram_base + sizeof(*suspend_info), + suspend_asm, + *soc_data->suspend_asm_sz); + + return 0; + +failed_map_iomuxc: + iounmap(suspend_info->m4if_base); + +failed_map_m4if: + return ret; +} + static int __init imx5_pm_common_init(const struct imx5_pm_data *data) { int ret; @@ -208,6 +389,7 @@ static int __init imx5_pm_common_init(const struct imx5_pm_data *data) arm_pm_idle = imx5_pm_idle; + ccm_base = ioremap(data->ccm_addr, SZ_16K); cortex_base = ioremap(data->cortex_addr, SZ_16K); gpc_base = ioremap(data->gpc_addr, SZ_16K); WARN_ON(!ccm_base || !cortex_base || !gpc_base); @@ -219,6 +401,11 @@ static int __init imx5_pm_common_init(const struct imx5_pm_data *data) if (ret) pr_warn("%s: cpuidle init failed %d\n", __func__, ret); + ret = imx5_suspend_init(data); + if (ret) + pr_warn("%s: No DDR LPM support with suspend %d!\n", + __func__, ret); + suspend_set_ops(&mx5_suspend_ops); return 0; @@ -226,10 +413,12 @@ static int __init imx5_pm_common_init(const struct imx5_pm_data *data) void __init imx51_pm_init(void) { - imx5_pm_common_init(&imx51_pm_data); + if (IS_ENABLED(CONFIG_SOC_IMX51)) + imx5_pm_common_init(&imx51_pm_data); } void __init imx53_pm_init(void) { - imx5_pm_common_init(&imx53_pm_data); + if (IS_ENABLED(CONFIG_SOC_IMX53)) + imx5_pm_common_init(&imx53_pm_data); } diff --git a/arch/arm/mach-imx/pm-imx6.c b/arch/arm/mach-imx/pm-imx6.c index 6a7c6fc78..93ecf559d 100644 --- a/arch/arm/mach-imx/pm-imx6.c +++ b/arch/arm/mach-imx/pm-imx6.c @@ -255,7 +255,7 @@ static void imx6q_enable_wb(bool enable) writel_relaxed(val, ccm_base + CCR); } -int imx6q_set_lpm(enum mxc_cpu_pwr_mode mode) +int imx6_set_lpm(enum mxc_cpu_pwr_mode mode) { u32 val = readl_relaxed(ccm_base + CLPCR); @@ -340,7 +340,7 @@ static int imx6q_pm_enter(suspend_state_t state) { switch (state) { case PM_SUSPEND_STANDBY: - imx6q_set_lpm(STOP_POWER_ON); + imx6_set_lpm(STOP_POWER_ON); imx6q_set_int_mem_clk_lpm(true); imx_gpc_pre_suspend(false); if (cpu_is_imx6sl()) @@ -350,10 +350,10 @@ static int imx6q_pm_enter(suspend_state_t state) if (cpu_is_imx6sl()) imx6sl_set_wait_clk(false); imx_gpc_post_resume(); - imx6q_set_lpm(WAIT_CLOCKED); + imx6_set_lpm(WAIT_CLOCKED); break; case PM_SUSPEND_MEM: - imx6q_set_lpm(STOP_POWER_OFF); + imx6_set_lpm(STOP_POWER_OFF); imx6q_set_int_mem_clk_lpm(false); imx6q_enable_wb(true); /* @@ -373,7 +373,7 @@ static int imx6q_pm_enter(suspend_state_t state) imx6_enable_rbc(false); imx6q_enable_wb(false); imx6q_set_int_mem_clk_lpm(true); - imx6q_set_lpm(WAIT_CLOCKED); + imx6_set_lpm(WAIT_CLOCKED); break; default: return -EINVAL; @@ -392,11 +392,6 @@ static const struct platform_suspend_ops imx6q_pm_ops = { .valid = imx6q_pm_valid, }; -void __init imx6q_pm_set_ccm_base(void __iomem *base) -{ - ccm_base = base; -} - static int __init imx6_pm_get_base(struct imx6_pm_base *base, const char *compat) { @@ -456,7 +451,7 @@ static int __init imx6q_suspend_init(const struct imx6_pm_socdata *socdata) goto put_node; } - ocram_pool = dev_get_gen_pool(&pdev->dev); + ocram_pool = gen_pool_get(&pdev->dev); if (!ocram_pool) { pr_warn("%s: ocram pool unavailable!\n", __func__); ret = -ENODEV; @@ -482,8 +477,7 @@ static int __init imx6q_suspend_init(const struct imx6_pm_socdata *socdata) /* * ccm physical address is not used by asm code currently, - * so get ccm virtual address directly, as we already have - * it from ccm driver. + * so get ccm virtual address directly. */ pm_info->ccm_base.vbase = ccm_base; @@ -568,7 +562,7 @@ static void __init imx6_pm_common_init(const struct imx6_pm_socdata /* * This is for SW workaround step #1 of ERR007265, see comments - * in imx6q_set_lpm for details of this errata. + * in imx6_set_lpm for details of this errata. * Force IOMUXC irq pending, so that the interrupt to GPC can be * used to deassert dsm_request signal when the signal gets * asserted unexpectedly. @@ -579,6 +573,24 @@ static void __init imx6_pm_common_init(const struct imx6_pm_socdata IMX6Q_GPR1_GINT); } +void __init imx6_pm_ccm_init(const char *ccm_compat) +{ + struct device_node *np; + u32 val; + + np = of_find_compatible_node(NULL, NULL, ccm_compat); + ccm_base = of_iomap(np, 0); + BUG_ON(!ccm_base); + + /* + * Initialize CCM_CLPCR_LPM into RUN mode to avoid ARM core + * clock being shut down unexpectedly by WAIT mode. + */ + val = readl_relaxed(ccm_base + CLPCR); + val &= ~BM_CLPCR_LPM; + writel_relaxed(val, ccm_base + CLPCR); +} + void __init imx6q_pm_init(void) { imx6_pm_common_init(&imx6q_pm_data); diff --git a/arch/arm/mach-imx/suspend-imx53.S b/arch/arm/mach-imx/suspend-imx53.S new file mode 100644 index 000000000..5ed078ad1 --- /dev/null +++ b/arch/arm/mach-imx/suspend-imx53.S @@ -0,0 +1,139 @@ +/* + * Copyright (C) 2008-2011 Freescale Semiconductor, Inc. + */ +/* + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +#include <linux/linkage.h> + +#define M4IF_MCR0_OFFSET (0x008C) +#define M4IF_MCR0_FDVFS (0x1 << 11) +#define M4IF_MCR0_FDVACK (0x1 << 27) + + .align 3 + +/* + * ==================== low level suspend ==================== + * + * On entry + * r0: pm_info structure address; + * + * suspend ocram space layout: + * ======================== high address ====================== + * . + * . + * . + * ^ + * ^ + * ^ + * imx53_suspend code + * PM_INFO structure(imx53_suspend_info) + * ======================== low address ======================= + */ + +/* Offsets of members of struct imx53_suspend_info */ +#define SUSPEND_INFO_MX53_M4IF_V_OFFSET 0x0 +#define SUSPEND_INFO_MX53_IOMUXC_V_OFFSET 0x4 +#define SUSPEND_INFO_MX53_IO_COUNT_OFFSET 0x8 +#define SUSPEND_INFO_MX53_IO_STATE_OFFSET 0xc + +ENTRY(imx53_suspend) + stmfd sp!, {r4,r5,r6,r7} + + /* Save pad config */ + ldr r1, [r0, #SUSPEND_INFO_MX53_IO_COUNT_OFFSET] + cmp r1, #0 + beq skip_pad_conf_1 + + add r2, r0, #SUSPEND_INFO_MX53_IO_STATE_OFFSET + ldr r3, [r0, #SUSPEND_INFO_MX53_IOMUXC_V_OFFSET] + +1: + ldr r5, [r2], #12 /* IOMUXC register offset */ + ldr r6, [r3, r5] /* current value */ + str r6, [r2], #4 /* save area */ + subs r1, r1, #1 + bne 1b + +skip_pad_conf_1: + /* Set FDVFS bit of M4IF_MCR0 to request DDR to enter self-refresh */ + ldr r1, [r0, #SUSPEND_INFO_MX53_M4IF_V_OFFSET] + ldr r2,[r1, #M4IF_MCR0_OFFSET] + orr r2, r2, #M4IF_MCR0_FDVFS + str r2,[r1, #M4IF_MCR0_OFFSET] + + /* Poll FDVACK bit of M4IF_MCR to wait for DDR to enter self-refresh */ +wait_sr_ack: + ldr r2,[r1, #M4IF_MCR0_OFFSET] + ands r2, r2, #M4IF_MCR0_FDVACK + beq wait_sr_ack + + /* Set pad config */ + ldr r1, [r0, #SUSPEND_INFO_MX53_IO_COUNT_OFFSET] + cmp r1, #0 + beq skip_pad_conf_2 + + add r2, r0, #SUSPEND_INFO_MX53_IO_STATE_OFFSET + ldr r3, [r0, #SUSPEND_INFO_MX53_IOMUXC_V_OFFSET] + +2: + ldr r5, [r2], #4 /* IOMUXC register offset */ + ldr r6, [r2], #4 /* clear */ + ldr r7, [r3, r5] + bic r7, r7, r6 + ldr r6, [r2], #8 /* set */ + orr r7, r7, r6 + str r7, [r3, r5] + subs r1, r1, #1 + bne 2b + +skip_pad_conf_2: + /* Zzz, enter stop mode */ + wfi + nop + nop + nop + nop + + /* Restore pad config */ + ldr r1, [r0, #SUSPEND_INFO_MX53_IO_COUNT_OFFSET] + cmp r1, #0 + beq skip_pad_conf_3 + + add r2, r0, #SUSPEND_INFO_MX53_IO_STATE_OFFSET + ldr r3, [r0, #SUSPEND_INFO_MX53_IOMUXC_V_OFFSET] + +3: + ldr r5, [r2], #12 /* IOMUXC register offset */ + ldr r6, [r2], #4 /* saved value */ + str r6, [r3, r5] + subs r1, r1, #1 + bne 3b + +skip_pad_conf_3: + /* Clear FDVFS bit of M4IF_MCR0 to request DDR to exit self-refresh */ + ldr r1, [r0, #SUSPEND_INFO_MX53_M4IF_V_OFFSET] + ldr r2,[r1, #M4IF_MCR0_OFFSET] + bic r2, r2, #M4IF_MCR0_FDVFS + str r2,[r1, #M4IF_MCR0_OFFSET] + + /* Poll FDVACK bit of M4IF_MCR to wait for DDR to exit self-refresh */ +wait_ar_ack: + ldr r2,[r1, #M4IF_MCR0_OFFSET] + ands r2, r2, #M4IF_MCR0_FDVACK + bne wait_ar_ack + + /* Restore registers */ + ldmfd sp!, {r4,r5,r6,r7} + mov pc, lr + +ENDPROC(imx53_suspend) + +ENTRY(imx53_suspend_sz) + .word . - imx53_suspend diff --git a/arch/arm/mach-imx/time.c b/arch/arm/mach-imx/time.c deleted file mode 100644 index 15d18e198..000000000 --- a/arch/arm/mach-imx/time.c +++ /dev/null @@ -1,385 +0,0 @@ -/* - * linux/arch/arm/plat-mxc/time.c - * - * Copyright (C) 2000-2001 Deep Blue Solutions - * Copyright (C) 2002 Shane Nay (shane@minirl.com) - * Copyright (C) 2006-2007 Pavel Pisa (ppisa@pikron.com) - * Copyright (C) 2008 Juergen Beisert (kernel@pengutronix.de) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version 2 - * of the License, or (at your option) any later version. - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, - * MA 02110-1301, USA. - */ - -#include <linux/interrupt.h> -#include <linux/irq.h> -#include <linux/clockchips.h> -#include <linux/clk.h> -#include <linux/delay.h> -#include <linux/err.h> -#include <linux/sched_clock.h> -#include <linux/of.h> -#include <linux/of_address.h> -#include <linux/of_irq.h> - -#include <asm/mach/time.h> - -#include "common.h" -#include "hardware.h" - -/* - * There are 2 versions of the timer hardware on Freescale MXC hardware. - * Version 1: MX1/MXL, MX21, MX27. - * Version 2: MX25, MX31, MX35, MX37, MX51 - */ - -/* defines common for all i.MX */ -#define MXC_TCTL 0x00 -#define MXC_TCTL_TEN (1 << 0) /* Enable module */ -#define MXC_TPRER 0x04 - -/* MX1, MX21, MX27 */ -#define MX1_2_TCTL_CLK_PCLK1 (1 << 1) -#define MX1_2_TCTL_IRQEN (1 << 4) -#define MX1_2_TCTL_FRR (1 << 8) -#define MX1_2_TCMP 0x08 -#define MX1_2_TCN 0x10 -#define MX1_2_TSTAT 0x14 - -/* MX21, MX27 */ -#define MX2_TSTAT_CAPT (1 << 1) -#define MX2_TSTAT_COMP (1 << 0) - -/* MX31, MX35, MX25, MX5, MX6 */ -#define V2_TCTL_WAITEN (1 << 3) /* Wait enable mode */ -#define V2_TCTL_CLK_IPG (1 << 6) -#define V2_TCTL_CLK_PER (2 << 6) -#define V2_TCTL_CLK_OSC_DIV8 (5 << 6) -#define V2_TCTL_FRR (1 << 9) -#define V2_TCTL_24MEN (1 << 10) -#define V2_TPRER_PRE24M 12 -#define V2_IR 0x0c -#define V2_TSTAT 0x08 -#define V2_TSTAT_OF1 (1 << 0) -#define V2_TCN 0x24 -#define V2_TCMP 0x10 - -#define V2_TIMER_RATE_OSC_DIV8 3000000 - -#define timer_is_v1() (cpu_is_mx1() || cpu_is_mx21() || cpu_is_mx27()) -#define timer_is_v2() (!timer_is_v1()) - -static struct clock_event_device clockevent_mxc; -static enum clock_event_mode clockevent_mode = CLOCK_EVT_MODE_UNUSED; - -static void __iomem *timer_base; - -static inline void gpt_irq_disable(void) -{ - unsigned int tmp; - - if (timer_is_v2()) - __raw_writel(0, timer_base + V2_IR); - else { - tmp = __raw_readl(timer_base + MXC_TCTL); - __raw_writel(tmp & ~MX1_2_TCTL_IRQEN, timer_base + MXC_TCTL); - } -} - -static inline void gpt_irq_enable(void) -{ - if (timer_is_v2()) - __raw_writel(1<<0, timer_base + V2_IR); - else { - __raw_writel(__raw_readl(timer_base + MXC_TCTL) | MX1_2_TCTL_IRQEN, - timer_base + MXC_TCTL); - } -} - -static void gpt_irq_acknowledge(void) -{ - if (timer_is_v1()) { - if (cpu_is_mx1()) - __raw_writel(0, timer_base + MX1_2_TSTAT); - else - __raw_writel(MX2_TSTAT_CAPT | MX2_TSTAT_COMP, - timer_base + MX1_2_TSTAT); - } else if (timer_is_v2()) - __raw_writel(V2_TSTAT_OF1, timer_base + V2_TSTAT); -} - -static void __iomem *sched_clock_reg; - -static u64 notrace mxc_read_sched_clock(void) -{ - return sched_clock_reg ? __raw_readl(sched_clock_reg) : 0; -} - -static struct delay_timer imx_delay_timer; - -static unsigned long imx_read_current_timer(void) -{ - return __raw_readl(sched_clock_reg); -} - -static int __init mxc_clocksource_init(struct clk *timer_clk) -{ - unsigned int c = clk_get_rate(timer_clk); - void __iomem *reg = timer_base + (timer_is_v2() ? V2_TCN : MX1_2_TCN); - - imx_delay_timer.read_current_timer = &imx_read_current_timer; - imx_delay_timer.freq = c; - register_current_timer_delay(&imx_delay_timer); - - sched_clock_reg = reg; - - sched_clock_register(mxc_read_sched_clock, 32, c); - return clocksource_mmio_init(reg, "mxc_timer1", c, 200, 32, - clocksource_mmio_readl_up); -} - -/* clock event */ - -static int mx1_2_set_next_event(unsigned long evt, - struct clock_event_device *unused) -{ - unsigned long tcmp; - - tcmp = __raw_readl(timer_base + MX1_2_TCN) + evt; - - __raw_writel(tcmp, timer_base + MX1_2_TCMP); - - return (int)(tcmp - __raw_readl(timer_base + MX1_2_TCN)) < 0 ? - -ETIME : 0; -} - -static int v2_set_next_event(unsigned long evt, - struct clock_event_device *unused) -{ - unsigned long tcmp; - - tcmp = __raw_readl(timer_base + V2_TCN) + evt; - - __raw_writel(tcmp, timer_base + V2_TCMP); - - return evt < 0x7fffffff && - (int)(tcmp - __raw_readl(timer_base + V2_TCN)) < 0 ? - -ETIME : 0; -} - -#ifdef DEBUG -static const char *clock_event_mode_label[] = { - [CLOCK_EVT_MODE_PERIODIC] = "CLOCK_EVT_MODE_PERIODIC", - [CLOCK_EVT_MODE_ONESHOT] = "CLOCK_EVT_MODE_ONESHOT", - [CLOCK_EVT_MODE_SHUTDOWN] = "CLOCK_EVT_MODE_SHUTDOWN", - [CLOCK_EVT_MODE_UNUSED] = "CLOCK_EVT_MODE_UNUSED", - [CLOCK_EVT_MODE_RESUME] = "CLOCK_EVT_MODE_RESUME", -}; -#endif /* DEBUG */ - -static void mxc_set_mode(enum clock_event_mode mode, - struct clock_event_device *evt) -{ - unsigned long flags; - - /* - * The timer interrupt generation is disabled at least - * for enough time to call mxc_set_next_event() - */ - local_irq_save(flags); - - /* Disable interrupt in GPT module */ - gpt_irq_disable(); - - if (mode != clockevent_mode) { - /* Set event time into far-far future */ - if (timer_is_v2()) - __raw_writel(__raw_readl(timer_base + V2_TCN) - 3, - timer_base + V2_TCMP); - else - __raw_writel(__raw_readl(timer_base + MX1_2_TCN) - 3, - timer_base + MX1_2_TCMP); - - /* Clear pending interrupt */ - gpt_irq_acknowledge(); - } - -#ifdef DEBUG - printk(KERN_INFO "mxc_set_mode: changing mode from %s to %s\n", - clock_event_mode_label[clockevent_mode], - clock_event_mode_label[mode]); -#endif /* DEBUG */ - - /* Remember timer mode */ - clockevent_mode = mode; - local_irq_restore(flags); - - switch (mode) { - case CLOCK_EVT_MODE_PERIODIC: - printk(KERN_ERR"mxc_set_mode: Periodic mode is not " - "supported for i.MX\n"); - break; - case CLOCK_EVT_MODE_ONESHOT: - /* - * Do not put overhead of interrupt enable/disable into - * mxc_set_next_event(), the core has about 4 minutes - * to call mxc_set_next_event() or shutdown clock after - * mode switching - */ - local_irq_save(flags); - gpt_irq_enable(); - local_irq_restore(flags); - break; - case CLOCK_EVT_MODE_SHUTDOWN: - case CLOCK_EVT_MODE_UNUSED: - case CLOCK_EVT_MODE_RESUME: - /* Left event sources disabled, no more interrupts appear */ - break; - } -} - -/* - * IRQ handler for the timer - */ -static irqreturn_t mxc_timer_interrupt(int irq, void *dev_id) -{ - struct clock_event_device *evt = &clockevent_mxc; - uint32_t tstat; - - if (timer_is_v2()) - tstat = __raw_readl(timer_base + V2_TSTAT); - else - tstat = __raw_readl(timer_base + MX1_2_TSTAT); - - gpt_irq_acknowledge(); - - evt->event_handler(evt); - - return IRQ_HANDLED; -} - -static struct irqaction mxc_timer_irq = { - .name = "i.MX Timer Tick", - .flags = IRQF_TIMER | IRQF_IRQPOLL, - .handler = mxc_timer_interrupt, -}; - -static struct clock_event_device clockevent_mxc = { - .name = "mxc_timer1", - .features = CLOCK_EVT_FEAT_ONESHOT, - .set_mode = mxc_set_mode, - .set_next_event = mx1_2_set_next_event, - .rating = 200, -}; - -static int __init mxc_clockevent_init(struct clk *timer_clk) -{ - if (timer_is_v2()) - clockevent_mxc.set_next_event = v2_set_next_event; - - clockevent_mxc.cpumask = cpumask_of(0); - clockevents_config_and_register(&clockevent_mxc, - clk_get_rate(timer_clk), - 0xff, 0xfffffffe); - - return 0; -} - -static void __init _mxc_timer_init(int irq, - struct clk *clk_per, struct clk *clk_ipg) -{ - uint32_t tctl_val; - - if (IS_ERR(clk_per)) { - pr_err("i.MX timer: unable to get clk\n"); - return; - } - - if (!IS_ERR(clk_ipg)) - clk_prepare_enable(clk_ipg); - - clk_prepare_enable(clk_per); - - /* - * Initialise to a known state (all timers off, and timing reset) - */ - - __raw_writel(0, timer_base + MXC_TCTL); - __raw_writel(0, timer_base + MXC_TPRER); /* see datasheet note */ - - if (timer_is_v2()) { - tctl_val = V2_TCTL_FRR | V2_TCTL_WAITEN | MXC_TCTL_TEN; - if (clk_get_rate(clk_per) == V2_TIMER_RATE_OSC_DIV8) { - tctl_val |= V2_TCTL_CLK_OSC_DIV8; - if (cpu_is_imx6dl() || cpu_is_imx6sx()) { - /* 24 / 8 = 3 MHz */ - __raw_writel(7 << V2_TPRER_PRE24M, - timer_base + MXC_TPRER); - tctl_val |= V2_TCTL_24MEN; - } - } else { - tctl_val |= V2_TCTL_CLK_PER; - } - } else { - tctl_val = MX1_2_TCTL_FRR | MX1_2_TCTL_CLK_PCLK1 | MXC_TCTL_TEN; - } - - __raw_writel(tctl_val, timer_base + MXC_TCTL); - - /* init and register the timer to the framework */ - mxc_clocksource_init(clk_per); - mxc_clockevent_init(clk_per); - - /* Make irqs happen */ - setup_irq(irq, &mxc_timer_irq); -} - -void __init mxc_timer_init(void __iomem *base, int irq) -{ - struct clk *clk_per = clk_get_sys("imx-gpt.0", "per"); - struct clk *clk_ipg = clk_get_sys("imx-gpt.0", "ipg"); - - timer_base = base; - - _mxc_timer_init(irq, clk_per, clk_ipg); -} - -static void __init mxc_timer_init_dt(struct device_node *np) -{ - struct clk *clk_per, *clk_ipg; - int irq; - - if (timer_base) - return; - - timer_base = of_iomap(np, 0); - WARN_ON(!timer_base); - irq = irq_of_parse_and_map(np, 0); - - clk_ipg = of_clk_get_by_name(np, "ipg"); - - /* Try osc_per first, and fall back to per otherwise */ - clk_per = of_clk_get_by_name(np, "osc_per"); - if (IS_ERR(clk_per)) - clk_per = of_clk_get_by_name(np, "per"); - - _mxc_timer_init(irq, clk_per, clk_ipg); -} -CLOCKSOURCE_OF_DECLARE(mx1_timer, "fsl,imx1-gpt", mxc_timer_init_dt); -CLOCKSOURCE_OF_DECLARE(mx25_timer, "fsl,imx25-gpt", mxc_timer_init_dt); -CLOCKSOURCE_OF_DECLARE(mx50_timer, "fsl,imx50-gpt", mxc_timer_init_dt); -CLOCKSOURCE_OF_DECLARE(mx51_timer, "fsl,imx51-gpt", mxc_timer_init_dt); -CLOCKSOURCE_OF_DECLARE(mx53_timer, "fsl,imx53-gpt", mxc_timer_init_dt); -CLOCKSOURCE_OF_DECLARE(mx6q_timer, "fsl,imx6q-gpt", mxc_timer_init_dt); -CLOCKSOURCE_OF_DECLARE(mx6sl_timer, "fsl,imx6sl-gpt", mxc_timer_init_dt); -CLOCKSOURCE_OF_DECLARE(mx6sx_timer, "fsl,imx6sx-gpt", mxc_timer_init_dt); diff --git a/arch/arm/mach-integrator/integrator_ap.c b/arch/arm/mach-integrator/integrator_ap.c index 30003ba44..5b0e363fe 100644 --- a/arch/arm/mach-integrator/integrator_ap.c +++ b/arch/arm/mach-integrator/integrator_ap.c @@ -37,7 +37,6 @@ #include <linux/stat.h> #include <linux/termios.h> -#include <asm/hardware/arm_timer.h> #include <asm/setup.h> #include <asm/param.h> /* HZ */ #include <asm/mach-types.h> diff --git a/arch/arm/mach-iop13xx/include/mach/time.h b/arch/arm/mach-iop13xx/include/mach/time.h index 15bc9bb78..c871e6874 100644 --- a/arch/arm/mach-iop13xx/include/mach/time.h +++ b/arch/arm/mach-iop13xx/include/mach/time.h @@ -42,7 +42,7 @@ static inline unsigned long iop13xx_core_freq(void) case IOP13XX_CORE_FREQ_1200: return 1200000000; default: - printk("%s: warning unknown frequency, defaulting to 800Mhz\n", + printk("%s: warning unknown frequency, defaulting to 800MHz\n", __func__); } diff --git a/arch/arm/mach-ixp4xx/include/mach/platform.h b/arch/arm/mach-ixp4xx/include/mach/platform.h index 75c4c6572..34b3d3f3f 100644 --- a/arch/arm/mach-ixp4xx/include/mach/platform.h +++ b/arch/arm/mach-ixp4xx/include/mach/platform.h @@ -74,7 +74,7 @@ extern unsigned long ixp4xx_exp_bus_size; /* * Clock Speed Definitions. */ -#define IXP4XX_PERIPHERAL_BUS_CLOCK (66) /* 66Mhzi APB BUS */ +#define IXP4XX_PERIPHERAL_BUS_CLOCK (66) /* 66MHzi APB BUS */ #define IXP4XX_UART_XTAL 14745600 /* diff --git a/arch/arm/mach-keystone/keystone.c b/arch/arm/mach-keystone/keystone.c index 066208758..e28801052 100644 --- a/arch/arm/mach-keystone/keystone.c +++ b/arch/arm/mach-keystone/keystone.c @@ -27,7 +27,6 @@ #include "keystone.h" -static struct notifier_block platform_nb; static unsigned long keystone_dma_pfn_offset __read_mostly; static int keystone_platform_notifier(struct notifier_block *nb, @@ -49,11 +48,18 @@ static int keystone_platform_notifier(struct notifier_block *nb, return NOTIFY_OK; } +static struct notifier_block platform_nb = { + .notifier_call = keystone_platform_notifier, +}; + static void __init keystone_init(void) { - keystone_pm_runtime_init(); - if (platform_nb.notifier_call) + if (PHYS_OFFSET >= KEYSTONE_HIGH_PHYS_START) { + keystone_dma_pfn_offset = PFN_DOWN(KEYSTONE_HIGH_PHYS_START - + KEYSTONE_LOW_PHYS_START); bus_register_notifier(&platform_bus_type, &platform_nb); + } + keystone_pm_runtime_init(); of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL); } @@ -62,11 +68,9 @@ static phys_addr_t keystone_virt_to_idmap(unsigned long x) return (phys_addr_t)(x) - CONFIG_PAGE_OFFSET + KEYSTONE_LOW_PHYS_START; } -static void __init keystone_init_meminfo(void) +static long long __init keystone_pv_fixup(void) { - bool lpae = IS_ENABLED(CONFIG_ARM_LPAE); - bool pvpatch = IS_ENABLED(CONFIG_ARM_PATCH_PHYS_VIRT); - phys_addr_t offset = PHYS_OFFSET - KEYSTONE_LOW_PHYS_START; + long long offset; phys_addr_t mem_start, mem_end; mem_start = memblock_start_of_DRAM(); @@ -75,32 +79,21 @@ static void __init keystone_init_meminfo(void) /* nothing to do if we are running out of the <32-bit space */ if (mem_start >= KEYSTONE_LOW_PHYS_START && mem_end <= KEYSTONE_LOW_PHYS_END) - return; - - if (!lpae || !pvpatch) { - pr_crit("Enable %s%s%s to run outside 32-bit space\n", - !lpae ? __stringify(CONFIG_ARM_LPAE) : "", - (!lpae && !pvpatch) ? " and " : "", - !pvpatch ? __stringify(CONFIG_ARM_PATCH_PHYS_VIRT) : ""); - } + return 0; if (mem_start < KEYSTONE_HIGH_PHYS_START || mem_end > KEYSTONE_HIGH_PHYS_END) { pr_crit("Invalid address space for memory (%08llx-%08llx)\n", - (u64)mem_start, (u64)mem_end); + (u64)mem_start, (u64)mem_end); + return 0; } - offset += KEYSTONE_HIGH_PHYS_START; - __pv_phys_pfn_offset = PFN_DOWN(offset); - __pv_offset = (offset - PAGE_OFFSET); + offset = KEYSTONE_HIGH_PHYS_START - KEYSTONE_LOW_PHYS_START; /* Populate the arch idmap hook */ arch_virt_to_idmap = keystone_virt_to_idmap; - platform_nb.notifier_call = keystone_platform_notifier; - keystone_dma_pfn_offset = PFN_DOWN(KEYSTONE_HIGH_PHYS_START - - KEYSTONE_LOW_PHYS_START); - pr_info("Switching to high address space at 0x%llx\n", (u64)offset); + return offset; } static const char *const keystone_match[] __initconst = { @@ -115,5 +108,5 @@ DT_MACHINE_START(KEYSTONE, "Keystone") .smp = smp_ops(keystone_smp_ops), .init_machine = keystone_init, .dt_compat = keystone_match, - .init_meminfo = keystone_init_meminfo, + .pv_fixup = keystone_pv_fixup, MACHINE_END diff --git a/arch/arm/mach-keystone/platsmp.c b/arch/arm/mach-keystone/platsmp.c index 5f46a7cf9..4bbb18463 100644 --- a/arch/arm/mach-keystone/platsmp.c +++ b/arch/arm/mach-keystone/platsmp.c @@ -39,19 +39,6 @@ static int keystone_smp_boot_secondary(unsigned int cpu, return error; } -#ifdef CONFIG_ARM_LPAE -static void __cpuinit keystone_smp_secondary_initmem(unsigned int cpu) -{ - pgd_t *pgd0 = pgd_offset_k(0); - cpu_set_ttbr(1, __pa(pgd0) + TTBR1_OFFSET); - local_flush_tlb_all(); -} -#else -static inline void __cpuinit keystone_smp_secondary_initmem(unsigned int cpu) -{} -#endif - struct smp_operations keystone_smp_ops __initdata = { .smp_boot_secondary = keystone_smp_boot_secondary, - .smp_secondary_init = keystone_smp_secondary_initmem, }; diff --git a/arch/arm/mach-keystone/pm_domain.c b/arch/arm/mach-keystone/pm_domain.c index 41bebfd29..edea697e8 100644 --- a/arch/arm/mach-keystone/pm_domain.c +++ b/arch/arm/mach-keystone/pm_domain.c @@ -19,40 +19,9 @@ #include <linux/clk-provider.h> #include <linux/of.h> -#ifdef CONFIG_PM -static int keystone_pm_runtime_suspend(struct device *dev) -{ - int ret; - - dev_dbg(dev, "%s\n", __func__); - - ret = pm_generic_runtime_suspend(dev); - if (ret) - return ret; - - ret = pm_clk_suspend(dev); - if (ret) { - pm_generic_runtime_resume(dev); - return ret; - } - - return 0; -} - -static int keystone_pm_runtime_resume(struct device *dev) -{ - dev_dbg(dev, "%s\n", __func__); - - pm_clk_resume(dev); - - return pm_generic_runtime_resume(dev); -} -#endif - static struct dev_pm_domain keystone_pm_domain = { .ops = { - SET_RUNTIME_PM_OPS(keystone_pm_runtime_suspend, - keystone_pm_runtime_resume, NULL) + USE_PM_CLK_RUNTIME_OPS USE_PLATFORM_PM_SLEEP_OPS }, }; diff --git a/arch/arm/mach-ks8695/include/mach/hardware.h b/arch/arm/mach-ks8695/include/mach/hardware.h index 5090338c0..959c748ee 100644 --- a/arch/arm/mach-ks8695/include/mach/hardware.h +++ b/arch/arm/mach-ks8695/include/mach/hardware.h @@ -17,7 +17,7 @@ #include <asm/sizes.h> /* - * Clocks are derived from MCLK, which is 25Mhz + * Clocks are derived from MCLK, which is 25MHz */ #define KS8695_CLOCK_RATE 25000000 diff --git a/arch/arm/mach-lpc18xx/Makefile b/arch/arm/mach-lpc18xx/Makefile new file mode 100644 index 000000000..bd0b7b5d6 --- /dev/null +++ b/arch/arm/mach-lpc18xx/Makefile @@ -0,0 +1 @@ +obj-y += board-dt.o diff --git a/arch/arm/mach-lpc18xx/Makefile.boot b/arch/arm/mach-lpc18xx/Makefile.boot new file mode 100644 index 000000000..eacfc3f5c --- /dev/null +++ b/arch/arm/mach-lpc18xx/Makefile.boot @@ -0,0 +1,3 @@ +# Empty file waiting for deletion once Makefile.boot isn't needed any more. +# Patch waits for application at +# http://www.arm.linux.org.uk/developer/patches/viewpatch.php?id=7889/1 . diff --git a/arch/arm/mach-lpc18xx/board-dt.c b/arch/arm/mach-lpc18xx/board-dt.c new file mode 100644 index 000000000..fdcee78d1 --- /dev/null +++ b/arch/arm/mach-lpc18xx/board-dt.c @@ -0,0 +1,22 @@ +/* + * Device Tree board file for NXP LPC18xx/43xx + * + * Copyright (C) 2015 Joachim Eastwood <manabian@gmail.com> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#include <asm/mach/arch.h> + +static const char *const lpc18xx_43xx_compat[] __initconst = { + "nxp,lpc1850", + "nxp,lpc4350", + "nxp,lpc4370", + NULL +}; + +DT_MACHINE_START(LPC18XXDT, "NXP LPC18xx/43xx (Device Tree)") + .dt_compat = lpc18xx_43xx_compat, +MACHINE_END diff --git a/arch/arm/mach-lpc32xx/clock.c b/arch/arm/mach-lpc32xx/clock.c index dd5d6f532..661c8f4b2 100644 --- a/arch/arm/mach-lpc32xx/clock.c +++ b/arch/arm/mach-lpc32xx/clock.c @@ -1238,10 +1238,7 @@ static struct clk_lookup lookups[] = { static int __init clk_init(void) { - int i; - - for (i = 0; i < ARRAY_SIZE(lookups); i++) - clkdev_add(&lookups[i]); + clkdev_add_table(lookups, ARRAY_SIZE(lookups)); /* * Setup muxed SYSCLK for HCLK PLL base -this selects the diff --git a/arch/arm/mach-lpc32xx/irq.c b/arch/arm/mach-lpc32xx/irq.c index 9ecb8f9c4..d4f7dc870 100644 --- a/arch/arm/mach-lpc32xx/irq.c +++ b/arch/arm/mach-lpc32xx/irq.c @@ -283,25 +283,25 @@ static int lpc32xx_set_irq_type(struct irq_data *d, unsigned int type) case IRQ_TYPE_EDGE_RISING: /* Rising edge sensitive */ __lpc32xx_set_irq_type(d->hwirq, 1, 1); - __irq_set_handler_locked(d->hwirq, handle_edge_irq); + __irq_set_handler_locked(d->irq, handle_edge_irq); break; case IRQ_TYPE_EDGE_FALLING: /* Falling edge sensitive */ __lpc32xx_set_irq_type(d->hwirq, 0, 1); - __irq_set_handler_locked(d->hwirq, handle_edge_irq); + __irq_set_handler_locked(d->irq, handle_edge_irq); break; case IRQ_TYPE_LEVEL_LOW: /* Low level sensitive */ __lpc32xx_set_irq_type(d->hwirq, 0, 0); - __irq_set_handler_locked(d->hwirq, handle_level_irq); + __irq_set_handler_locked(d->irq, handle_level_irq); break; case IRQ_TYPE_LEVEL_HIGH: /* High level sensitive */ __lpc32xx_set_irq_type(d->hwirq, 1, 0); - __irq_set_handler_locked(d->hwirq, handle_level_irq); + __irq_set_handler_locked(d->irq, handle_level_irq); break; /* Other modes are not supported */ diff --git a/arch/arm/mach-mvebu/headsmp-a9.S b/arch/arm/mach-mvebu/headsmp-a9.S index 08d5ed46b..b093a196e 100644 --- a/arch/arm/mach-mvebu/headsmp-a9.S +++ b/arch/arm/mach-mvebu/headsmp-a9.S @@ -13,15 +13,11 @@ */ #include <linux/linkage.h> -#include <linux/init.h> #include <asm/assembler.h> - __CPUINIT - ENTRY(mvebu_cortex_a9_secondary_startup) ARM_BE8(setend be) - bl v7_invalidate_l1 bl armada_38x_scu_power_up b secondary_startup ENDPROC(mvebu_cortex_a9_secondary_startup) diff --git a/arch/arm/mach-mvebu/platsmp-a9.c b/arch/arm/mach-mvebu/platsmp-a9.c index df0a9cc5d..3d5000481 100644 --- a/arch/arm/mach-mvebu/platsmp-a9.c +++ b/arch/arm/mach-mvebu/platsmp-a9.c @@ -24,7 +24,7 @@ extern void mvebu_cortex_a9_secondary_startup(void); -static int __cpuinit mvebu_cortex_a9_boot_secondary(unsigned int cpu, +static int mvebu_cortex_a9_boot_secondary(unsigned int cpu, struct task_struct *idle) { int ret, hw_cpu; diff --git a/arch/arm/mach-nspire/nspire.c b/arch/arm/mach-nspire/nspire.c index 3445a5686..34c2a1b32 100644 --- a/arch/arm/mach-nspire/nspire.c +++ b/arch/arm/mach-nspire/nspire.c @@ -22,8 +22,6 @@ #include <asm/mach-types.h> #include <asm/mach/map.h> -#include <asm/hardware/timer-sp.h> - #include "mmio.h" #include "clcd.h" diff --git a/arch/arm/mach-omap1/ams-delta-fiq-handler.S b/arch/arm/mach-omap1/ams-delta-fiq-handler.S index 3d1e1c250..5d7fb596b 100644 --- a/arch/arm/mach-omap1/ams-delta-fiq-handler.S +++ b/arch/arm/mach-omap1/ams-delta-fiq-handler.S @@ -17,11 +17,10 @@ #include <asm/assembler.h> #include <mach/board-ams-delta.h> - -#include <mach/irqs.h> #include <mach/ams-delta-fiq.h> #include "iomap.h" +#include "soc.h" /* * GPIO related definitions, copied from arch/arm/plat-omap/gpio.c. diff --git a/arch/arm/mach-omap1/board-ams-delta.c b/arch/arm/mach-omap1/board-ams-delta.c index 2aab761ee..a95499ea8 100644 --- a/arch/arm/mach-omap1/board-ams-delta.c +++ b/arch/arm/mach-omap1/board-ams-delta.c @@ -626,6 +626,7 @@ MACHINE_START(AMS_DELTA, "Amstrad E3 (Delta)") .map_io = ams_delta_map_io, .init_early = omap1_init_early, .init_irq = omap1_init_irq, + .handle_irq = omap1_handle_irq, .init_machine = ams_delta_init, .init_late = ams_delta_init_late, .init_time = omap1_timer_init, diff --git a/arch/arm/mach-omap1/board-fsample.c b/arch/arm/mach-omap1/board-fsample.c index 702d58039..0fb51d22c 100644 --- a/arch/arm/mach-omap1/board-fsample.c +++ b/arch/arm/mach-omap1/board-fsample.c @@ -362,6 +362,7 @@ MACHINE_START(OMAP_FSAMPLE, "OMAP730 F-Sample") .map_io = omap_fsample_map_io, .init_early = omap1_init_early, .init_irq = omap1_init_irq, + .handle_irq = omap1_handle_irq, .init_machine = omap_fsample_init, .init_late = omap1_init_late, .init_time = omap1_timer_init, diff --git a/arch/arm/mach-omap1/board-generic.c b/arch/arm/mach-omap1/board-generic.c index e1d917177..9708629f8 100644 --- a/arch/arm/mach-omap1/board-generic.c +++ b/arch/arm/mach-omap1/board-generic.c @@ -82,6 +82,7 @@ MACHINE_START(OMAP_GENERIC, "Generic OMAP1510/1610/1710") .map_io = omap16xx_map_io, .init_early = omap1_init_early, .init_irq = omap1_init_irq, + .handle_irq = omap1_handle_irq, .init_machine = omap_generic_init, .init_late = omap1_init_late, .init_time = omap1_timer_init, diff --git a/arch/arm/mach-omap1/board-h2.c b/arch/arm/mach-omap1/board-h2.c index 5b45d266d..8340d684d 100644 --- a/arch/arm/mach-omap1/board-h2.c +++ b/arch/arm/mach-omap1/board-h2.c @@ -426,6 +426,7 @@ MACHINE_START(OMAP_H2, "TI-H2") .map_io = omap16xx_map_io, .init_early = omap1_init_early, .init_irq = omap1_init_irq, + .handle_irq = omap1_handle_irq, .init_machine = h2_init, .init_late = omap1_init_late, .init_time = omap1_timer_init, diff --git a/arch/arm/mach-omap1/board-h3-mmc.c b/arch/arm/mach-omap1/board-h3-mmc.c index 17d77914d..43aab63cb 100644 --- a/arch/arm/mach-omap1/board-h3-mmc.c +++ b/arch/arm/mach-omap1/board-h3-mmc.c @@ -16,6 +16,7 @@ #include <linux/i2c/tps65010.h> +#include "common.h" #include "board-h3.h" #include "mmc.h" diff --git a/arch/arm/mach-omap1/board-h3.c b/arch/arm/mach-omap1/board-h3.c index bfed4f928..086ff34e0 100644 --- a/arch/arm/mach-omap1/board-h3.c +++ b/arch/arm/mach-omap1/board-h3.c @@ -452,6 +452,7 @@ MACHINE_START(OMAP_H3, "TI OMAP1710 H3 board") .map_io = omap16xx_map_io, .init_early = omap1_init_early, .init_irq = omap1_init_irq, + .handle_irq = omap1_handle_irq, .init_machine = h3_init, .init_late = omap1_init_late, .init_time = omap1_timer_init, diff --git a/arch/arm/mach-omap1/board-htcherald.c b/arch/arm/mach-omap1/board-htcherald.c index 35a2379b9..9525ef9bc 100644 --- a/arch/arm/mach-omap1/board-htcherald.c +++ b/arch/arm/mach-omap1/board-htcherald.c @@ -601,6 +601,7 @@ MACHINE_START(HERALD, "HTC Herald") .map_io = htcherald_map_io, .init_early = omap1_init_early, .init_irq = omap1_init_irq, + .handle_irq = omap1_handle_irq, .init_machine = htcherald_init, .init_late = omap1_init_late, .init_time = omap1_timer_init, diff --git a/arch/arm/mach-omap1/board-innovator.c b/arch/arm/mach-omap1/board-innovator.c index c49ce83cc..ed4e045c2 100644 --- a/arch/arm/mach-omap1/board-innovator.c +++ b/arch/arm/mach-omap1/board-innovator.c @@ -456,6 +456,7 @@ MACHINE_START(OMAP_INNOVATOR, "TI-Innovator") .map_io = innovator_map_io, .init_early = omap1_init_early, .init_irq = omap1_init_irq, + .handle_irq = omap1_handle_irq, .init_machine = innovator_init, .init_late = omap1_init_late, .init_time = omap1_timer_init, diff --git a/arch/arm/mach-omap1/board-nokia770.c b/arch/arm/mach-omap1/board-nokia770.c index 85089d821..dd3a3ad79 100644 --- a/arch/arm/mach-omap1/board-nokia770.c +++ b/arch/arm/mach-omap1/board-nokia770.c @@ -7,6 +7,7 @@ * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. */ +#include <linux/clkdev.h> #include <linux/irq.h> #include <linux/gpio.h> #include <linux/kernel.h> @@ -14,7 +15,6 @@ #include <linux/mutex.h> #include <linux/platform_device.h> #include <linux/input.h> -#include <linux/clk.h> #include <linux/omapfb.h> #include <linux/spi/spi.h> @@ -294,6 +294,7 @@ MACHINE_START(NOKIA770, "Nokia 770") .map_io = omap16xx_map_io, .init_early = omap1_init_early, .init_irq = omap1_init_irq, + .handle_irq = omap1_handle_irq, .init_machine = omap_nokia770_init, .init_late = omap1_init_late, .init_time = omap1_timer_init, diff --git a/arch/arm/mach-omap1/board-osk.c b/arch/arm/mach-omap1/board-osk.c index 7436d4cf6..0efd165b8 100644 --- a/arch/arm/mach-omap1/board-osk.c +++ b/arch/arm/mach-omap1/board-osk.c @@ -610,6 +610,7 @@ MACHINE_START(OMAP_OSK, "TI-OSK") .map_io = omap16xx_map_io, .init_early = omap1_init_early, .init_irq = omap1_init_irq, + .handle_irq = omap1_handle_irq, .init_machine = osk_init, .init_late = omap1_init_late, .init_time = omap1_timer_init, diff --git a/arch/arm/mach-omap1/board-palmte.c b/arch/arm/mach-omap1/board-palmte.c index 3b8e98f43..1142ae431 100644 --- a/arch/arm/mach-omap1/board-palmte.c +++ b/arch/arm/mach-omap1/board-palmte.c @@ -235,6 +235,7 @@ MACHINE_START(OMAP_PALMTE, "OMAP310 based Palm Tungsten E") .map_io = omap15xx_map_io, .init_early = omap1_init_early, .init_irq = omap1_init_irq, + .handle_irq = omap1_handle_irq, .init_machine = omap_palmte_init, .init_late = omap1_init_late, .init_time = omap1_timer_init, diff --git a/arch/arm/mach-omap1/board-palmtt.c b/arch/arm/mach-omap1/board-palmtt.c index ca5012088..54a547a96 100644 --- a/arch/arm/mach-omap1/board-palmtt.c +++ b/arch/arm/mach-omap1/board-palmtt.c @@ -282,6 +282,7 @@ MACHINE_START(OMAP_PALMTT, "OMAP1510 based Palm Tungsten|T") .map_io = omap15xx_map_io, .init_early = omap1_init_early, .init_irq = omap1_init_irq, + .handle_irq = omap1_handle_irq, .init_machine = omap_palmtt_init, .init_late = omap1_init_late, .init_time = omap1_timer_init, diff --git a/arch/arm/mach-omap1/board-palmz71.c b/arch/arm/mach-omap1/board-palmz71.c index 470e12d67..87ec04ae4 100644 --- a/arch/arm/mach-omap1/board-palmz71.c +++ b/arch/arm/mach-omap1/board-palmz71.c @@ -297,6 +297,7 @@ MACHINE_START(OMAP_PALMZ71, "OMAP310 based Palm Zire71") .map_io = omap15xx_map_io, .init_early = omap1_init_early, .init_irq = omap1_init_irq, + .handle_irq = omap1_handle_irq, .init_machine = omap_palmz71_init, .init_late = omap1_init_late, .init_time = omap1_timer_init, diff --git a/arch/arm/mach-omap1/board-perseus2.c b/arch/arm/mach-omap1/board-perseus2.c index 8b2f7127f..3d76f0540 100644 --- a/arch/arm/mach-omap1/board-perseus2.c +++ b/arch/arm/mach-omap1/board-perseus2.c @@ -324,6 +324,7 @@ MACHINE_START(OMAP_PERSEUS2, "OMAP730 Perseus2") .map_io = omap_perseus2_map_io, .init_early = omap1_init_early, .init_irq = omap1_init_irq, + .handle_irq = omap1_handle_irq, .init_machine = omap_perseus2_init, .init_late = omap1_init_late, .init_time = omap1_timer_init, diff --git a/arch/arm/mach-omap1/board-sx1.c b/arch/arm/mach-omap1/board-sx1.c index 29e526235..939991ea3 100644 --- a/arch/arm/mach-omap1/board-sx1.c +++ b/arch/arm/mach-omap1/board-sx1.c @@ -343,6 +343,7 @@ MACHINE_START(SX1, "OMAP310 based Siemens SX1") .map_io = omap15xx_map_io, .init_early = omap1_init_early, .init_irq = omap1_init_irq, + .handle_irq = omap1_handle_irq, .init_machine = omap_sx1_init, .init_late = omap1_init_late, .init_time = omap1_timer_init, diff --git a/arch/arm/mach-omap1/board-voiceblue.c b/arch/arm/mach-omap1/board-voiceblue.c index 4677a9ccb..e960687d0 100644 --- a/arch/arm/mach-omap1/board-voiceblue.c +++ b/arch/arm/mach-omap1/board-voiceblue.c @@ -288,6 +288,7 @@ MACHINE_START(VOICEBLUE, "VoiceBlue OMAP5910") .map_io = omap15xx_map_io, .init_early = omap1_init_early, .init_irq = omap1_init_irq, + .handle_irq = omap1_handle_irq, .init_machine = voiceblue_init, .init_late = omap1_init_late, .init_time = omap1_timer_init, diff --git a/arch/arm/mach-omap1/common.h b/arch/arm/mach-omap1/common.h index 732f8ee2f..65bb6e808 100644 --- a/arch/arm/mach-omap1/common.h +++ b/arch/arm/mach-omap1/common.h @@ -30,10 +30,14 @@ #include <linux/i2c-omap.h> #include <linux/reboot.h> +#include <asm/exception.h> + #include <plat/i2c.h> #include <mach/irqs.h> +#include "soc.h" + #if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850) void omap7xx_map_io(void); #else @@ -73,6 +77,7 @@ static inline int omap_serial_wakeup_init(void) void omap1_init_early(void); void omap1_init_irq(void); +void __exception_irq_entry omap1_handle_irq(struct pt_regs *regs); void omap1_init_late(void); void omap1_restart(enum reboot_mode, const char *); @@ -91,8 +96,6 @@ static inline int __init omap_32k_timer_init(void) } #endif -extern u32 omap_irq_flags; - #ifdef CONFIG_ARCH_OMAP16XX extern int ocpi_enable(void); #else diff --git a/arch/arm/mach-omap1/dma.c b/arch/arm/mach-omap1/dma.c index 4be601b63..7b02ed218 100644 --- a/arch/arm/mach-omap1/dma.c +++ b/arch/arm/mach-omap1/dma.c @@ -28,7 +28,7 @@ #include <linux/omap-dma.h> #include <mach/tc.h> -#include <mach/irqs.h> +#include "soc.h" #define OMAP1_DMA_BASE (0xfffed800) #define OMAP1_LOGICAL_DMA_CH_COUNT 17 diff --git a/arch/arm/mach-omap1/gpio16xx.c b/arch/arm/mach-omap1/gpio16xx.c index 6e6ec93dc..5b7a29b29 100644 --- a/arch/arm/mach-omap1/gpio16xx.c +++ b/arch/arm/mach-omap1/gpio16xx.c @@ -21,6 +21,8 @@ #include <mach/irqs.h> +#include "soc.h" + #define OMAP1610_GPIO1_BASE 0xfffbe400 #define OMAP1610_GPIO2_BASE 0xfffbec00 #define OMAP1610_GPIO3_BASE 0xfffbb400 diff --git a/arch/arm/mach-omap1/gpio7xx.c b/arch/arm/mach-omap1/gpio7xx.c index 4612d2506..0e5f68de2 100644 --- a/arch/arm/mach-omap1/gpio7xx.c +++ b/arch/arm/mach-omap1/gpio7xx.c @@ -21,6 +21,8 @@ #include <mach/irqs.h> +#include "soc.h" + #define OMAP7XX_GPIO1_BASE 0xfffbc000 #define OMAP7XX_GPIO2_BASE 0xfffbc800 #define OMAP7XX_GPIO3_BASE 0xfffbd000 diff --git a/arch/arm/mach-omap1/i2c.c b/arch/arm/mach-omap1/i2c.c index 7f5761cff..82887d645 100644 --- a/arch/arm/mach-omap1/i2c.c +++ b/arch/arm/mach-omap1/i2c.c @@ -27,7 +27,6 @@ #define OMAP_I2C_SIZE 0x3f #define OMAP1_I2C_BASE 0xfffb3800 -#define OMAP1_INT_I2C (32 + 4) static const char name[] = "omap_i2c"; @@ -67,7 +66,7 @@ int __init omap_i2c_add_bus(struct omap_i2c_bus_platform_data *pdata, res[0].start = OMAP1_I2C_BASE; res[0].end = res[0].start + OMAP_I2C_SIZE; res[0].flags = IORESOURCE_MEM; - res[1].start = OMAP1_INT_I2C; + res[1].start = INT_I2C; res[1].flags = IORESOURCE_IRQ; pdev->resource = res; diff --git a/arch/arm/mach-omap1/include/mach/entry-macro.S b/arch/arm/mach-omap1/include/mach/entry-macro.S deleted file mode 100644 index 78a8c6c24..000000000 --- a/arch/arm/mach-omap1/include/mach/entry-macro.S +++ /dev/null @@ -1,39 +0,0 @@ -/* - * arch/arm/mach-omap1/include/mach/entry-macro.S - * - * Low-level IRQ helper macros for OMAP-based platforms - * - * Copyright (C) 2009 Texas Instruments - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#include <mach/hardware.h> -#include <mach/irqs.h> - - .macro get_irqnr_preamble, base, tmp - .endm - - .macro get_irqnr_and_base, irqnr, irqstat, base, tmp - ldr \base, =OMAP1_IO_ADDRESS(OMAP_IH1_BASE) - ldr \irqnr, [\base, #IRQ_ITR_REG_OFFSET] - ldr \tmp, [\base, #IRQ_MIR_REG_OFFSET] - mov \irqstat, #0xffffffff - bic \tmp, \irqstat, \tmp - tst \irqnr, \tmp - beq 1510f - - ldr \irqnr, [\base, #IRQ_SIR_FIQ_REG_OFFSET] - ldr \tmp, =omap_irq_flags @ irq flags address - ldr \tmp, [\tmp, #0] @ irq flags value - cmp \irqnr, #0 - ldreq \irqnr, [\base, #IRQ_SIR_IRQ_REG_OFFSET] - cmpeq \irqnr, \tmp - ldreq \base, =OMAP1_IO_ADDRESS(OMAP_IH2_BASE) - ldreq \irqnr, [\base, #IRQ_SIR_IRQ_REG_OFFSET] - addeqs \irqnr, \irqnr, #32 -1510: - .endm - diff --git a/arch/arm/mach-omap1/include/mach/irqs.h b/arch/arm/mach-omap1/include/mach/irqs.h index 729992d7d..905008527 100644 --- a/arch/arm/mach-omap1/include/mach/irqs.h +++ b/arch/arm/mach-omap1/include/mach/irqs.h @@ -34,84 +34,84 @@ * NOTE: See also the OMAP-1510 and 1610 specific IRQ numbers below * */ -#define INT_CAMERA 1 -#define INT_FIQ 3 -#define INT_RTDX 6 -#define INT_DSP_MMU_ABORT 7 -#define INT_HOST 8 -#define INT_ABORT 9 -#define INT_BRIDGE_PRIV 13 -#define INT_GPIO_BANK1 14 -#define INT_UART3 15 -#define INT_TIMER3 16 -#define INT_DMA_CH0_6 19 -#define INT_DMA_CH1_7 20 -#define INT_DMA_CH2_8 21 -#define INT_DMA_CH3 22 -#define INT_DMA_CH4 23 -#define INT_DMA_CH5 24 -#define INT_TIMER1 26 -#define INT_WD_TIMER 27 -#define INT_BRIDGE_PUB 28 -#define INT_TIMER2 30 -#define INT_LCD_CTRL 31 +#define INT_CAMERA (NR_IRQS_LEGACY + 1) +#define INT_FIQ (NR_IRQS_LEGACY + 3) +#define INT_RTDX (NR_IRQS_LEGACY + 6) +#define INT_DSP_MMU_ABORT (NR_IRQS_LEGACY + 7) +#define INT_HOST (NR_IRQS_LEGACY + 8) +#define INT_ABORT (NR_IRQS_LEGACY + 9) +#define INT_BRIDGE_PRIV (NR_IRQS_LEGACY + 13) +#define INT_GPIO_BANK1 (NR_IRQS_LEGACY + 14) +#define INT_UART3 (NR_IRQS_LEGACY + 15) +#define INT_TIMER3 (NR_IRQS_LEGACY + 16) +#define INT_DMA_CH0_6 (NR_IRQS_LEGACY + 19) +#define INT_DMA_CH1_7 (NR_IRQS_LEGACY + 20) +#define INT_DMA_CH2_8 (NR_IRQS_LEGACY + 21) +#define INT_DMA_CH3 (NR_IRQS_LEGACY + 22) +#define INT_DMA_CH4 (NR_IRQS_LEGACY + 23) +#define INT_DMA_CH5 (NR_IRQS_LEGACY + 24) +#define INT_TIMER1 (NR_IRQS_LEGACY + 26) +#define INT_WD_TIMER (NR_IRQS_LEGACY + 27) +#define INT_BRIDGE_PUB (NR_IRQS_LEGACY + 28) +#define INT_TIMER2 (NR_IRQS_LEGACY + 30) +#define INT_LCD_CTRL (NR_IRQS_LEGACY + 31) /* * OMAP-1510 specific IRQ numbers for interrupt handler 1 */ -#define INT_1510_IH2_IRQ 0 -#define INT_1510_RES2 2 -#define INT_1510_SPI_TX 4 -#define INT_1510_SPI_RX 5 -#define INT_1510_DSP_MAILBOX1 10 -#define INT_1510_DSP_MAILBOX2 11 -#define INT_1510_RES12 12 -#define INT_1510_LB_MMU 17 -#define INT_1510_RES18 18 -#define INT_1510_LOCAL_BUS 29 +#define INT_1510_IH2_IRQ (NR_IRQS_LEGACY + 0) +#define INT_1510_RES2 (NR_IRQS_LEGACY + 2) +#define INT_1510_SPI_TX (NR_IRQS_LEGACY + 4) +#define INT_1510_SPI_RX (NR_IRQS_LEGACY + 5) +#define INT_1510_DSP_MAILBOX1 (NR_IRQS_LEGACY + 10) +#define INT_1510_DSP_MAILBOX2 (NR_IRQS_LEGACY + 11) +#define INT_1510_RES12 (NR_IRQS_LEGACY + 12) +#define INT_1510_LB_MMU (NR_IRQS_LEGACY + 17) +#define INT_1510_RES18 (NR_IRQS_LEGACY + 18) +#define INT_1510_LOCAL_BUS (NR_IRQS_LEGACY + 29) /* * OMAP-1610 specific IRQ numbers for interrupt handler 1 */ #define INT_1610_IH2_IRQ INT_1510_IH2_IRQ -#define INT_1610_IH2_FIQ 2 -#define INT_1610_McBSP2_TX 4 -#define INT_1610_McBSP2_RX 5 -#define INT_1610_DSP_MAILBOX1 10 -#define INT_1610_DSP_MAILBOX2 11 -#define INT_1610_LCD_LINE 12 -#define INT_1610_GPTIMER1 17 -#define INT_1610_GPTIMER2 18 -#define INT_1610_SSR_FIFO_0 29 +#define INT_1610_IH2_FIQ (NR_IRQS_LEGACY + 2) +#define INT_1610_McBSP2_TX (NR_IRQS_LEGACY + 4) +#define INT_1610_McBSP2_RX (NR_IRQS_LEGACY + 5) +#define INT_1610_DSP_MAILBOX1 (NR_IRQS_LEGACY + 10) +#define INT_1610_DSP_MAILBOX2 (NR_IRQS_LEGACY + 11) +#define INT_1610_LCD_LINE (NR_IRQS_LEGACY + 12) +#define INT_1610_GPTIMER1 (NR_IRQS_LEGACY + 17) +#define INT_1610_GPTIMER2 (NR_IRQS_LEGACY + 18) +#define INT_1610_SSR_FIFO_0 (NR_IRQS_LEGACY + 29) /* * OMAP-7xx specific IRQ numbers for interrupt handler 1 */ -#define INT_7XX_IH2_FIQ 0 -#define INT_7XX_IH2_IRQ 1 -#define INT_7XX_USB_NON_ISO 2 -#define INT_7XX_USB_ISO 3 -#define INT_7XX_ICR 4 -#define INT_7XX_EAC 5 -#define INT_7XX_GPIO_BANK1 6 -#define INT_7XX_GPIO_BANK2 7 -#define INT_7XX_GPIO_BANK3 8 -#define INT_7XX_McBSP2TX 10 -#define INT_7XX_McBSP2RX 11 -#define INT_7XX_McBSP2RX_OVF 12 -#define INT_7XX_LCD_LINE 14 -#define INT_7XX_GSM_PROTECT 15 -#define INT_7XX_TIMER3 16 -#define INT_7XX_GPIO_BANK5 17 -#define INT_7XX_GPIO_BANK6 18 -#define INT_7XX_SPGIO_WR 29 +#define INT_7XX_IH2_FIQ (NR_IRQS_LEGACY + 0) +#define INT_7XX_IH2_IRQ (NR_IRQS_LEGACY + 1) +#define INT_7XX_USB_NON_ISO (NR_IRQS_LEGACY + 2) +#define INT_7XX_USB_ISO (NR_IRQS_LEGACY + 3) +#define INT_7XX_ICR (NR_IRQS_LEGACY + 4) +#define INT_7XX_EAC (NR_IRQS_LEGACY + 5) +#define INT_7XX_GPIO_BANK1 (NR_IRQS_LEGACY + 6) +#define INT_7XX_GPIO_BANK2 (NR_IRQS_LEGACY + 7) +#define INT_7XX_GPIO_BANK3 (NR_IRQS_LEGACY + 8) +#define INT_7XX_McBSP2TX (NR_IRQS_LEGACY + 10) +#define INT_7XX_McBSP2RX (NR_IRQS_LEGACY + 11) +#define INT_7XX_McBSP2RX_OVF (NR_IRQS_LEGACY + 12) +#define INT_7XX_LCD_LINE (NR_IRQS_LEGACY + 14) +#define INT_7XX_GSM_PROTECT (NR_IRQS_LEGACY + 15) +#define INT_7XX_TIMER3 (NR_IRQS_LEGACY + 16) +#define INT_7XX_GPIO_BANK5 (NR_IRQS_LEGACY + 17) +#define INT_7XX_GPIO_BANK6 (NR_IRQS_LEGACY + 18) +#define INT_7XX_SPGIO_WR (NR_IRQS_LEGACY + 29) /* * IRQ numbers for interrupt handler 2 * * NOTE: See also the OMAP-1510 and 1610 specific IRQ numbers below */ -#define IH2_BASE 32 +#define IH2_BASE (NR_IRQS_LEGACY + 32) #define INT_KEYBOARD (1 + IH2_BASE) #define INT_uWireTX (2 + IH2_BASE) @@ -255,11 +255,7 @@ #endif #define OMAP_FPGA_IRQ_END (OMAP_FPGA_IRQ_BASE + OMAP_FPGA_NR_IRQS) -#define NR_IRQS OMAP_FPGA_IRQ_END - -#define OMAP_IRQ_BIT(irq) (1 << ((irq) % 32)) - -#include <mach/hardware.h> +#define OMAP_IRQ_BIT(irq) (1 << ((irq - NR_IRQS_LEGACY) % 32)) #ifdef CONFIG_FIQ #define FIQ_START 1024 diff --git a/arch/arm/mach-omap1/include/mach/memory.h b/arch/arm/mach-omap1/include/mach/memory.h index 058a4f7d4..d43ff0f1c 100644 --- a/arch/arm/mach-omap1/include/mach/memory.h +++ b/arch/arm/mach-omap1/include/mach/memory.h @@ -5,6 +5,9 @@ #ifndef __ASM_ARCH_MEMORY_H #define __ASM_ARCH_MEMORY_H +/* REVISIT: omap1 legacy drivers still rely on this */ +#include <mach/soc.h> + /* * Bus address is physical address, except for OMAP-1510 Local Bus. * OMAP-1510 bus address is translated into a Local Bus address if the @@ -14,7 +17,6 @@ * because of the strncmp(). */ #if defined(CONFIG_ARCH_OMAP15XX) && !defined(__ASSEMBLER__) -#include <mach/soc.h> /* * OMAP-1510 Local Bus address offset diff --git a/arch/arm/mach-omap1/include/mach/serial.h b/arch/arm/mach-omap1/include/mach/serial.h index 2ce6a2db4..4700e384c 100644 --- a/arch/arm/mach-omap1/include/mach/serial.h +++ b/arch/arm/mach-omap1/include/mach/serial.h @@ -27,11 +27,6 @@ */ #define OMAP_UART_INFO_OFS 0x3ffc -/* OMAP1 serial ports */ -#define OMAP1_UART1_BASE 0xfffb0000 -#define OMAP1_UART2_BASE 0xfffb0800 -#define OMAP1_UART3_BASE 0xfffb9800 - #define OMAP_PORT_SHIFT 2 #define OMAP7XX_PORT_SHIFT 0 diff --git a/arch/arm/mach-omap1/include/mach/soc.h b/arch/arm/mach-omap1/include/mach/soc.h index 612bd1cc2..3d935570e 100644 --- a/arch/arm/mach-omap1/include/mach/soc.h +++ b/arch/arm/mach-omap1/include/mach/soc.h @@ -28,6 +28,10 @@ #ifndef __ASM_ARCH_OMAP_CPU_H #define __ASM_ARCH_OMAP_CPU_H +#include <asm/irq.h> +#include <mach/hardware.h> +#include <mach/irqs.h> + #ifndef __ASSEMBLY__ #include <linux/bitops.h> diff --git a/arch/arm/mach-omap1/irq.c b/arch/arm/mach-omap1/irq.c index a8a533df2..f4d346fda 100644 --- a/arch/arm/mach-omap1/irq.c +++ b/arch/arm/mach-omap1/irq.c @@ -43,6 +43,7 @@ #include <linux/io.h> #include <asm/irq.h> +#include <asm/exception.h> #include <asm/mach/irq.h> #include "soc.h" @@ -56,66 +57,41 @@ struct omap_irq_bank { unsigned long base_reg; + void __iomem *va; unsigned long trigger_map; unsigned long wake_enable; }; -u32 omap_irq_flags; +static u32 omap_l2_irq; static unsigned int irq_bank_count; static struct omap_irq_bank *irq_banks; +static struct irq_domain *domain; -static inline void irq_bank_writel(unsigned long value, int bank, int offset) -{ - omap_writel(value, irq_banks[bank].base_reg + offset); -} - -static void omap_ack_irq(struct irq_data *d) +static inline unsigned int irq_bank_readl(int bank, int offset) { - if (d->irq > 31) - omap_writel(0x1, OMAP_IH2_BASE + IRQ_CONTROL_REG_OFFSET); - - omap_writel(0x1, OMAP_IH1_BASE + IRQ_CONTROL_REG_OFFSET); + return readl_relaxed(irq_banks[bank].va + offset); } - -static void omap_mask_irq(struct irq_data *d) +static inline void irq_bank_writel(unsigned long value, int bank, int offset) { - int bank = IRQ_BANK(d->irq); - u32 l; - - l = omap_readl(irq_banks[bank].base_reg + IRQ_MIR_REG_OFFSET); - l |= 1 << IRQ_BIT(d->irq); - omap_writel(l, irq_banks[bank].base_reg + IRQ_MIR_REG_OFFSET); + writel_relaxed(value, irq_banks[bank].va + offset); } -static void omap_unmask_irq(struct irq_data *d) +static void omap_ack_irq(int irq) { - int bank = IRQ_BANK(d->irq); - u32 l; + if (irq > 31) + writel_relaxed(0x1, irq_banks[1].va + IRQ_CONTROL_REG_OFFSET); - l = omap_readl(irq_banks[bank].base_reg + IRQ_MIR_REG_OFFSET); - l &= ~(1 << IRQ_BIT(d->irq)); - omap_writel(l, irq_banks[bank].base_reg + IRQ_MIR_REG_OFFSET); + writel_relaxed(0x1, irq_banks[0].va + IRQ_CONTROL_REG_OFFSET); } static void omap_mask_ack_irq(struct irq_data *d) { - omap_mask_irq(d); - omap_ack_irq(d); -} - -static int omap_wake_irq(struct irq_data *d, unsigned int enable) -{ - int bank = IRQ_BANK(d->irq); - - if (enable) - irq_banks[bank].wake_enable |= IRQ_BIT(d->irq); - else - irq_banks[bank].wake_enable &= ~IRQ_BIT(d->irq); + struct irq_chip_type *ct = irq_data_get_chip_type(d); - return 0; + ct->chip.irq_mask(d); + omap_ack_irq(d->irq); } - /* * Allows tuning the IRQ type and priority * @@ -165,46 +141,105 @@ static struct omap_irq_bank omap1610_irq_banks[] = { }; #endif -static struct irq_chip omap_irq_chip = { - .name = "MPU", - .irq_ack = omap_mask_ack_irq, - .irq_mask = omap_mask_irq, - .irq_unmask = omap_unmask_irq, - .irq_set_wake = omap_wake_irq, -}; +asmlinkage void __exception_irq_entry omap1_handle_irq(struct pt_regs *regs) +{ + void __iomem *l1 = irq_banks[0].va; + void __iomem *l2 = irq_banks[1].va; + u32 irqnr; + + do { + irqnr = readl_relaxed(l1 + IRQ_ITR_REG_OFFSET); + irqnr &= ~(readl_relaxed(l1 + IRQ_MIR_REG_OFFSET) & 0xffffffff); + if (!irqnr) + break; + + irqnr = readl_relaxed(l1 + IRQ_SIR_FIQ_REG_OFFSET); + if (irqnr) + goto irq; + + irqnr = readl_relaxed(l1 + IRQ_SIR_IRQ_REG_OFFSET); + if (irqnr == omap_l2_irq) { + irqnr = readl_relaxed(l2 + IRQ_SIR_IRQ_REG_OFFSET); + if (irqnr) + irqnr += 32; + } +irq: + if (irqnr) + handle_domain_irq(domain, irqnr, regs); + else + break; + } while (irqnr); +} + +static __init void +omap_alloc_gc(void __iomem *base, unsigned int irq_start, unsigned int num) +{ + struct irq_chip_generic *gc; + struct irq_chip_type *ct; + + gc = irq_alloc_generic_chip("MPU", 1, irq_start, base, + handle_level_irq); + ct = gc->chip_types; + ct->chip.irq_ack = omap_mask_ack_irq; + ct->chip.irq_mask = irq_gc_mask_set_bit; + ct->chip.irq_unmask = irq_gc_mask_clr_bit; + ct->chip.irq_set_wake = irq_gc_set_wake; + ct->regs.mask = IRQ_MIR_REG_OFFSET; + irq_setup_generic_chip(gc, IRQ_MSK(num), IRQ_GC_INIT_MASK_CACHE, + IRQ_NOREQUEST | IRQ_NOPROBE, 0); +} void __init omap1_init_irq(void) { - int i, j; + struct irq_chip_type *ct; + struct irq_data *d = NULL; + int i, j, irq_base; + unsigned long nr_irqs; #if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850) if (cpu_is_omap7xx()) { - omap_irq_flags = INT_7XX_IH2_IRQ; irq_banks = omap7xx_irq_banks; irq_bank_count = ARRAY_SIZE(omap7xx_irq_banks); } #endif #ifdef CONFIG_ARCH_OMAP15XX if (cpu_is_omap1510()) { - omap_irq_flags = INT_1510_IH2_IRQ; irq_banks = omap1510_irq_banks; irq_bank_count = ARRAY_SIZE(omap1510_irq_banks); } if (cpu_is_omap310()) { - omap_irq_flags = INT_1510_IH2_IRQ; irq_banks = omap310_irq_banks; irq_bank_count = ARRAY_SIZE(omap310_irq_banks); } #endif #if defined(CONFIG_ARCH_OMAP16XX) if (cpu_is_omap16xx()) { - omap_irq_flags = INT_1510_IH2_IRQ; irq_banks = omap1610_irq_banks; irq_bank_count = ARRAY_SIZE(omap1610_irq_banks); } #endif - printk("Total of %i interrupts in %i interrupt banks\n", - irq_bank_count * 32, irq_bank_count); + + for (i = 0; i < irq_bank_count; i++) { + irq_banks[i].va = ioremap(irq_banks[i].base_reg, 0xff); + if (WARN_ON(!irq_banks[i].va)) + return; + } + + nr_irqs = irq_bank_count * 32; + + irq_base = irq_alloc_descs(-1, 0, nr_irqs, 0); + if (irq_base < 0) { + pr_warn("Couldn't allocate IRQ numbers\n"); + irq_base = 0; + } + omap_l2_irq = cpu_is_omap7xx() ? irq_base + 1 : irq_base; + omap_l2_irq -= NR_IRQS_LEGACY; + + domain = irq_domain_add_legacy(NULL, nr_irqs, irq_base, 0, + &irq_domain_simple_ops, NULL); + + pr_info("Total of %lu interrupts in %i interrupt banks\n", + nr_irqs, irq_bank_count); /* Mask and clear all interrupts */ for (i = 0; i < irq_bank_count; i++) { @@ -227,19 +262,15 @@ void __init omap1_init_irq(void) irq_trigger = irq_banks[i].trigger_map >> IRQ_BIT(j); omap_irq_set_cfg(j, 0, 0, irq_trigger); - - irq_set_chip_and_handler(j, &omap_irq_chip, - handle_level_irq); set_irq_flags(j, IRQF_VALID); } + omap_alloc_gc(irq_banks[i].va, irq_base + i * 32, 32); } /* Unmask level 2 handler */ - - if (cpu_is_omap7xx()) - omap_unmask_irq(irq_get_irq_data(INT_7XX_IH2_IRQ)); - else if (cpu_is_omap15xx()) - omap_unmask_irq(irq_get_irq_data(INT_1510_IH2_IRQ)); - else if (cpu_is_omap16xx()) - omap_unmask_irq(irq_get_irq_data(INT_1610_IH2_IRQ)); + d = irq_get_irq_data(irq_find_mapping(domain, omap_l2_irq)); + if (d) { + ct = irq_data_get_chip_type(d); + ct->chip.irq_unmask(d); + } } diff --git a/arch/arm/mach-omap1/mux.c b/arch/arm/mach-omap1/mux.c index 667ce5027..599490a59 100644 --- a/arch/arm/mach-omap1/mux.c +++ b/arch/arm/mach-omap1/mux.c @@ -36,7 +36,7 @@ static struct omap_mux_cfg arch_mux_cfg; #if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850) -static struct pin_config __initdata_or_module omap7xx_pins[] = { +static struct pin_config omap7xx_pins[] = { MUX_CFG_7XX("E2_7XX_KBR0", 12, 21, 0, 20, 1, 0) MUX_CFG_7XX("J7_7XX_KBR1", 12, 25, 0, 24, 1, 0) MUX_CFG_7XX("E1_7XX_KBR2", 12, 29, 0, 28, 1, 0) @@ -82,7 +82,7 @@ MUX_CFG_7XX("UART_7XX_2", 8, 1, 6, 0, 0, 0) #endif /* CONFIG_ARCH_OMAP730 || CONFIG_ARCH_OMAP850 */ #if defined(CONFIG_ARCH_OMAP15XX) || defined(CONFIG_ARCH_OMAP16XX) -static struct pin_config __initdata_or_module omap1xxx_pins[] = { +static struct pin_config omap1xxx_pins[] = { /* * description mux mode mux pull pull pull pu_pd pu dbg * reg offset mode reg bit ena reg @@ -343,7 +343,7 @@ MUX_CFG("Y14_1610_CCP_DATAM", 9, 21, 6, 2, 3, 1, 2, 0, 0) #define OMAP1XXX_PINS_SZ 0 #endif /* CONFIG_ARCH_OMAP15XX || CONFIG_ARCH_OMAP16XX */ -static int __init_or_module omap1_cfg_reg(const struct pin_config *cfg) +static int omap1_cfg_reg(const struct pin_config *cfg) { static DEFINE_SPINLOCK(mux_spin_lock); unsigned long flags; @@ -469,7 +469,7 @@ int __init omap_mux_register(struct omap_mux_cfg *arch_mux_cfg) /* * Sets the Omap MUX and PULL_DWN registers based on the table */ -int __init_or_module omap_cfg_reg(const unsigned long index) +int omap_cfg_reg(const unsigned long index) { struct pin_config *reg; diff --git a/arch/arm/mach-omap1/pm.c b/arch/arm/mach-omap1/pm.c index dd94567c3..ee5460b8e 100644 --- a/arch/arm/mach-omap1/pm.c +++ b/arch/arm/mach-omap1/pm.c @@ -62,6 +62,7 @@ #include "iomap.h" #include "clock.h" #include "pm.h" +#include "soc.h" #include "sram.h" static unsigned int arm_sleep_save[ARM_SLEEP_SAVE_SIZE]; diff --git a/arch/arm/mach-omap1/pm_bus.c b/arch/arm/mach-omap1/pm_bus.c index c40e209de..667c1637f 100644 --- a/arch/arm/mach-omap1/pm_bus.c +++ b/arch/arm/mach-omap1/pm_bus.c @@ -21,48 +21,15 @@ #include "soc.h" -#ifdef CONFIG_PM -static int omap1_pm_runtime_suspend(struct device *dev) -{ - int ret; - - dev_dbg(dev, "%s\n", __func__); - - ret = pm_generic_runtime_suspend(dev); - if (ret) - return ret; - - ret = pm_clk_suspend(dev); - if (ret) { - pm_generic_runtime_resume(dev); - return ret; - } - - return 0; -} - -static int omap1_pm_runtime_resume(struct device *dev) -{ - dev_dbg(dev, "%s\n", __func__); - - pm_clk_resume(dev); - return pm_generic_runtime_resume(dev); -} - static struct dev_pm_domain default_pm_domain = { .ops = { - .runtime_suspend = omap1_pm_runtime_suspend, - .runtime_resume = omap1_pm_runtime_resume, + USE_PM_CLK_RUNTIME_OPS USE_PLATFORM_PM_SLEEP_OPS }, }; -#define OMAP1_PM_DOMAIN (&default_pm_domain) -#else -#define OMAP1_PM_DOMAIN NULL -#endif /* CONFIG_PM */ static struct pm_clk_notifier_block platform_bus_notifier = { - .pm_domain = OMAP1_PM_DOMAIN, + .pm_domain = &default_pm_domain, .con_ids = { "ick", "fck", NULL, }, }; diff --git a/arch/arm/mach-omap1/serial.c b/arch/arm/mach-omap1/serial.c index d1ac08016..a65bd0c44 100644 --- a/arch/arm/mach-omap1/serial.c +++ b/arch/arm/mach-omap1/serial.c @@ -25,6 +25,7 @@ #include <mach/mux.h> #include "pm.h" +#include "soc.h" static struct clk * uart1_ck; static struct clk * uart2_ck; diff --git a/arch/arm/mach-omap1/timer.c b/arch/arm/mach-omap1/timer.c index bde7a35e5..06c5ba757 100644 --- a/arch/arm/mach-omap1/timer.c +++ b/arch/arm/mach-omap1/timer.c @@ -27,10 +27,10 @@ #include <linux/platform_device.h> #include <linux/platform_data/dmtimer-omap.h> -#include <mach/irqs.h> - #include <plat/dmtimer.h> +#include "soc.h" + #define OMAP1610_GPTIMER1_BASE 0xfffb1400 #define OMAP1610_GPTIMER2_BASE 0xfffb1c00 #define OMAP1610_GPTIMER3_BASE 0xfffb2400 diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig index 6468f15f0..4a023e8d1 100644 --- a/arch/arm/mach-omap2/Kconfig +++ b/arch/arm/mach-omap2/Kconfig @@ -60,6 +60,7 @@ config SOC_AM43XX select ARM_GIC select MACH_OMAP_GENERIC select MIGHT_HAVE_CACHE_L2X0 + select HAVE_ARM_SCU config SOC_DRA7XX bool "TI DRA7XX" @@ -171,12 +172,6 @@ config MACH_OMAP2_TUSB6010 depends on ARCH_OMAP2 && SOC_OMAP2420 default y if MACH_NOKIA_N8X0 -config MACH_OMAP3_BEAGLE - bool "OMAP3 BEAGLE board" - depends on ARCH_OMAP3 - default y - select OMAP_PACKAGE_CBB - config MACH_OMAP_LDP bool "OMAP3 LDP board" depends on ARCH_OMAP3 @@ -203,12 +198,6 @@ config MACH_OMAP3_TORPEDO for full description please see the products webpage at http://www.logicpd.com/products/development-kits/zoom-omap35x-torpedo-development-kit -config MACH_OVERO - bool "Gumstix Overo board" - depends on ARCH_OMAP3 - default y - select OMAP_PACKAGE_CBB - config MACH_OMAP3517EVM bool "OMAP3517/ AM3517 EVM board" depends on ARCH_OMAP3 @@ -240,16 +229,6 @@ config MACH_NOKIA_RX51 default y select OMAP_PACKAGE_CBB -config MACH_CM_T35 - bool "CompuLab CM-T35/CM-T3730 modules" - depends on ARCH_OMAP3 - default y - select MACH_CM_T3730 - select OMAP_PACKAGE_CUS - -config MACH_CM_T3730 - bool - config OMAP3_SDRC_AC_TIMING bool "Enable SDRC AC timing register changes" depends on ARCH_OMAP3 diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile index ec002bd4a..903c85be2 100644 --- a/arch/arm/mach-omap2/Makefile +++ b/arch/arm/mach-omap2/Makefile @@ -242,17 +242,14 @@ obj-$(CONFIG_SOC_OMAP2420) += msdi.o # Specific board support obj-$(CONFIG_MACH_OMAP_GENERIC) += board-generic.o pdata-quirks.o -obj-$(CONFIG_MACH_OMAP3_BEAGLE) += board-omap3beagle.o obj-$(CONFIG_MACH_OMAP_LDP) += board-ldp.o obj-$(CONFIG_MACH_OMAP3530_LV_SOM) += board-omap3logic.o obj-$(CONFIG_MACH_OMAP3_TORPEDO) += board-omap3logic.o -obj-$(CONFIG_MACH_OVERO) += board-overo.o obj-$(CONFIG_MACH_OMAP3_PANDORA) += board-omap3pandora.o obj-$(CONFIG_MACH_NOKIA_N8X0) += board-n8x0.o obj-$(CONFIG_MACH_NOKIA_RX51) += board-rx51.o sdram-nokia.o obj-$(CONFIG_MACH_NOKIA_RX51) += board-rx51-peripherals.o obj-$(CONFIG_MACH_NOKIA_RX51) += board-rx51-video.o -obj-$(CONFIG_MACH_CM_T35) += board-cm-t35.o # Platform specific device init code @@ -277,8 +274,5 @@ obj-y += $(nand-m) $(nand-y) smsc911x-$(CONFIG_SMSC911X) := gpmc-smsc911x.o obj-y += $(smsc911x-m) $(smsc911x-y) -ifneq ($(CONFIG_HWSPINLOCK_OMAP),) -obj-y += hwspinlock.o -endif obj-y += common-board-devices.o twl-common.o dss-common.o diff --git a/arch/arm/mach-omap2/board-cm-t35.c b/arch/arm/mach-omap2/board-cm-t35.c deleted file mode 100644 index b5dfbc1b1..000000000 --- a/arch/arm/mach-omap2/board-cm-t35.c +++ /dev/null @@ -1,769 +0,0 @@ -/* - * CompuLab CM-T35/CM-T3730 modules support - * - * Copyright (C) 2009-2011 CompuLab, Ltd. - * Authors: Mike Rapoport <mike@compulab.co.il> - * Igor Grinberg <grinberg@compulab.co.il> - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * version 2 as published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - */ - -#include <linux/clk-provider.h> -#include <linux/clkdev.h> -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/platform_device.h> -#include <linux/input.h> -#include <linux/input/matrix_keypad.h> -#include <linux/delay.h> -#include <linux/gpio.h> -#include <linux/omap-gpmc.h> -#include <linux/platform_data/gpio-omap.h> - -#include <linux/platform_data/at24.h> -#include <linux/i2c/twl.h> -#include <linux/regulator/fixed.h> -#include <linux/regulator/machine.h> -#include <linux/mmc/host.h> -#include <linux/usb/phy.h> - -#include <linux/spi/spi.h> -#include <linux/spi/tdo24m.h> - -#include <asm/mach-types.h> -#include <asm/mach/arch.h> -#include <asm/mach/map.h> - -#include <linux/platform_data/mtd-nand-omap2.h> -#include <video/omapdss.h> -#include <video/omap-panel-data.h> -#include <linux/platform_data/spi-omap2-mcspi.h> - -#include "common.h" -#include "mux.h" -#include "sdram-micron-mt46h32m32lf-6.h" -#include "hsmmc.h" -#include "common-board-devices.h" - -#define CM_T35_GPIO_PENDOWN 57 -#define SB_T35_USB_HUB_RESET_GPIO 167 - -#define CM_T35_SMSC911X_CS 5 -#define CM_T35_SMSC911X_GPIO 163 -#define SB_T35_SMSC911X_CS 4 -#define SB_T35_SMSC911X_GPIO 65 - -#if defined(CONFIG_SMSC911X) || defined(CONFIG_SMSC911X_MODULE) -#include <linux/smsc911x.h> -#include "gpmc-smsc911x.h" - -static struct omap_smsc911x_platform_data cm_t35_smsc911x_cfg = { - .id = 0, - .cs = CM_T35_SMSC911X_CS, - .gpio_irq = CM_T35_SMSC911X_GPIO, - .gpio_reset = -EINVAL, - .flags = SMSC911X_USE_32BIT | SMSC911X_SAVE_MAC_ADDRESS, -}; - -static struct omap_smsc911x_platform_data sb_t35_smsc911x_cfg = { - .id = 1, - .cs = SB_T35_SMSC911X_CS, - .gpio_irq = SB_T35_SMSC911X_GPIO, - .gpio_reset = -EINVAL, - .flags = SMSC911X_USE_32BIT | SMSC911X_SAVE_MAC_ADDRESS, -}; - -static struct regulator_consumer_supply cm_t35_smsc911x_supplies[] = { - REGULATOR_SUPPLY("vddvario", "smsc911x.0"), - REGULATOR_SUPPLY("vdd33a", "smsc911x.0"), -}; - -static struct regulator_consumer_supply sb_t35_smsc911x_supplies[] = { - REGULATOR_SUPPLY("vddvario", "smsc911x.1"), - REGULATOR_SUPPLY("vdd33a", "smsc911x.1"), -}; - -static void __init cm_t35_init_ethernet(void) -{ - regulator_register_fixed(0, cm_t35_smsc911x_supplies, - ARRAY_SIZE(cm_t35_smsc911x_supplies)); - regulator_register_fixed(1, sb_t35_smsc911x_supplies, - ARRAY_SIZE(sb_t35_smsc911x_supplies)); - - gpmc_smsc911x_init(&cm_t35_smsc911x_cfg); - gpmc_smsc911x_init(&sb_t35_smsc911x_cfg); -} -#else -static inline void __init cm_t35_init_ethernet(void) { return; } -#endif - -#if defined(CONFIG_LEDS_GPIO) || defined(CONFIG_LEDS_GPIO_MODULE) -#include <linux/leds.h> - -static struct gpio_led cm_t35_leds[] = { - [0] = { - .gpio = 186, - .name = "cm-t35:green", - .default_trigger = "heartbeat", - .active_low = 0, - }, -}; - -static struct gpio_led_platform_data cm_t35_led_pdata = { - .num_leds = ARRAY_SIZE(cm_t35_leds), - .leds = cm_t35_leds, -}; - -static struct platform_device cm_t35_led_device = { - .name = "leds-gpio", - .id = -1, - .dev = { - .platform_data = &cm_t35_led_pdata, - }, -}; - -static void __init cm_t35_init_led(void) -{ - platform_device_register(&cm_t35_led_device); -} -#else -static inline void cm_t35_init_led(void) {} -#endif - -#if defined(CONFIG_MTD_NAND_OMAP2) || defined(CONFIG_MTD_NAND_OMAP2_MODULE) -#include <linux/mtd/mtd.h> -#include <linux/mtd/nand.h> -#include <linux/mtd/partitions.h> - -static struct mtd_partition cm_t35_nand_partitions[] = { - { - .name = "xloader", - .offset = 0, /* Offset = 0x00000 */ - .size = 4 * NAND_BLOCK_SIZE, - .mask_flags = MTD_WRITEABLE - }, - { - .name = "uboot", - .offset = MTDPART_OFS_APPEND, /* Offset = 0x80000 */ - .size = 15 * NAND_BLOCK_SIZE, - }, - { - .name = "uboot environment", - .offset = MTDPART_OFS_APPEND, /* Offset = 0x260000 */ - .size = 2 * NAND_BLOCK_SIZE, - }, - { - .name = "linux", - .offset = MTDPART_OFS_APPEND, /* Offset = 0x2A0000 */ - .size = 32 * NAND_BLOCK_SIZE, - }, - { - .name = "rootfs", - .offset = MTDPART_OFS_APPEND, /* Offset = 0x6A0000 */ - .size = MTDPART_SIZ_FULL, - }, -}; - -static struct omap_nand_platform_data cm_t35_nand_data = { - .parts = cm_t35_nand_partitions, - .nr_parts = ARRAY_SIZE(cm_t35_nand_partitions), - .cs = 0, -}; - -static void __init cm_t35_init_nand(void) -{ - if (gpmc_nand_init(&cm_t35_nand_data, NULL) < 0) - pr_err("CM-T35: Unable to register NAND device\n"); -} -#else -static inline void cm_t35_init_nand(void) {} -#endif - -#define CM_T35_LCD_EN_GPIO 157 -#define CM_T35_LCD_BL_GPIO 58 -#define CM_T35_DVI_EN_GPIO 54 - -static const struct display_timing cm_t35_lcd_videomode = { - .pixelclock = { 0, 26000000, 0 }, - - .hactive = { 0, 480, 0 }, - .hfront_porch = { 0, 104, 0 }, - .hback_porch = { 0, 8, 0 }, - .hsync_len = { 0, 8, 0 }, - - .vactive = { 0, 640, 0 }, - .vfront_porch = { 0, 4, 0 }, - .vback_porch = { 0, 2, 0 }, - .vsync_len = { 0, 2, 0 }, - - .flags = DISPLAY_FLAGS_HSYNC_LOW | DISPLAY_FLAGS_VSYNC_LOW | - DISPLAY_FLAGS_DE_HIGH | DISPLAY_FLAGS_PIXDATA_NEGEDGE, -}; - -static struct panel_dpi_platform_data cm_t35_lcd_pdata = { - .name = "lcd", - .source = "dpi.0", - - .data_lines = 18, - - .display_timing = &cm_t35_lcd_videomode, - - .enable_gpio = -1, - .backlight_gpio = CM_T35_LCD_BL_GPIO, -}; - -static struct platform_device cm_t35_lcd_device = { - .name = "panel-dpi", - .id = 0, - .dev.platform_data = &cm_t35_lcd_pdata, -}; - -static struct connector_dvi_platform_data cm_t35_dvi_connector_pdata = { - .name = "dvi", - .source = "tfp410.0", - .i2c_bus_num = -1, -}; - -static struct platform_device cm_t35_dvi_connector_device = { - .name = "connector-dvi", - .id = 0, - .dev.platform_data = &cm_t35_dvi_connector_pdata, -}; - -static struct encoder_tfp410_platform_data cm_t35_tfp410_pdata = { - .name = "tfp410.0", - .source = "dpi.0", - .data_lines = 24, - .power_down_gpio = CM_T35_DVI_EN_GPIO, -}; - -static struct platform_device cm_t35_tfp410_device = { - .name = "tfp410", - .id = 0, - .dev.platform_data = &cm_t35_tfp410_pdata, -}; - -static struct connector_atv_platform_data cm_t35_tv_pdata = { - .name = "tv", - .source = "venc.0", - .connector_type = OMAP_DSS_VENC_TYPE_SVIDEO, - .invert_polarity = false, -}; - -static struct platform_device cm_t35_tv_connector_device = { - .name = "connector-analog-tv", - .id = 0, - .dev.platform_data = &cm_t35_tv_pdata, -}; - -static struct omap_dss_board_info cm_t35_dss_data = { - .default_display_name = "dvi", -}; - -static struct omap2_mcspi_device_config tdo24m_mcspi_config = { - .turbo_mode = 0, -}; - -static struct tdo24m_platform_data tdo24m_config = { - .model = TDO35S, -}; - -static struct spi_board_info cm_t35_lcd_spi_board_info[] __initdata = { - { - .modalias = "tdo24m", - .bus_num = 4, - .chip_select = 0, - .max_speed_hz = 1000000, - .controller_data = &tdo24m_mcspi_config, - .platform_data = &tdo24m_config, - }, -}; - -static void __init cm_t35_init_display(void) -{ - int err; - - spi_register_board_info(cm_t35_lcd_spi_board_info, - ARRAY_SIZE(cm_t35_lcd_spi_board_info)); - - - err = gpio_request_one(CM_T35_LCD_EN_GPIO, GPIOF_OUT_INIT_LOW, - "lcd bl enable"); - if (err) { - pr_err("CM-T35: failed to request LCD EN GPIO\n"); - return; - } - - msleep(50); - gpio_set_value(CM_T35_LCD_EN_GPIO, 1); - - err = omap_display_init(&cm_t35_dss_data); - if (err) { - pr_err("CM-T35: failed to register DSS device\n"); - gpio_free(CM_T35_LCD_EN_GPIO); - } - - platform_device_register(&cm_t35_tfp410_device); - platform_device_register(&cm_t35_dvi_connector_device); - platform_device_register(&cm_t35_lcd_device); - platform_device_register(&cm_t35_tv_connector_device); -} - -static struct regulator_consumer_supply cm_t35_vmmc1_supply[] = { - REGULATOR_SUPPLY("vmmc", "omap_hsmmc.0"), -}; - -static struct regulator_consumer_supply cm_t35_vsim_supply[] = { - REGULATOR_SUPPLY("vmmc_aux", "omap_hsmmc.0"), -}; - -static struct regulator_consumer_supply cm_t35_vio_supplies[] = { - REGULATOR_SUPPLY("vcc", "spi1.0"), - REGULATOR_SUPPLY("vdds_dsi", "omapdss"), - REGULATOR_SUPPLY("vdds_dsi", "omapdss_dpi.0"), - REGULATOR_SUPPLY("vdds_dsi", "omapdss_dsi.0"), -}; - -/* VMMC1 for MMC1 pins CMD, CLK, DAT0..DAT3 (20 mA, plus card == max 220 mA) */ -static struct regulator_init_data cm_t35_vmmc1 = { - .constraints = { - .min_uV = 1850000, - .max_uV = 3150000, - .valid_modes_mask = REGULATOR_MODE_NORMAL - | REGULATOR_MODE_STANDBY, - .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE - | REGULATOR_CHANGE_MODE - | REGULATOR_CHANGE_STATUS, - }, - .num_consumer_supplies = ARRAY_SIZE(cm_t35_vmmc1_supply), - .consumer_supplies = cm_t35_vmmc1_supply, -}; - -/* VSIM for MMC1 pins DAT4..DAT7 (2 mA, plus card == max 50 mA) */ -static struct regulator_init_data cm_t35_vsim = { - .constraints = { - .min_uV = 1800000, - .max_uV = 3000000, - .valid_modes_mask = REGULATOR_MODE_NORMAL - | REGULATOR_MODE_STANDBY, - .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE - | REGULATOR_CHANGE_MODE - | REGULATOR_CHANGE_STATUS, - }, - .num_consumer_supplies = ARRAY_SIZE(cm_t35_vsim_supply), - .consumer_supplies = cm_t35_vsim_supply, -}; - -static struct regulator_init_data cm_t35_vio = { - .constraints = { - .min_uV = 1800000, - .max_uV = 1800000, - .apply_uV = true, - .valid_modes_mask = REGULATOR_MODE_NORMAL - | REGULATOR_MODE_STANDBY, - .valid_ops_mask = REGULATOR_CHANGE_MODE, - }, - .num_consumer_supplies = ARRAY_SIZE(cm_t35_vio_supplies), - .consumer_supplies = cm_t35_vio_supplies, -}; - -static uint32_t cm_t35_keymap[] = { - KEY(0, 0, KEY_A), KEY(0, 1, KEY_B), KEY(0, 2, KEY_LEFT), - KEY(1, 0, KEY_UP), KEY(1, 1, KEY_ENTER), KEY(1, 2, KEY_DOWN), - KEY(2, 0, KEY_RIGHT), KEY(2, 1, KEY_C), KEY(2, 2, KEY_D), -}; - -static struct matrix_keymap_data cm_t35_keymap_data = { - .keymap = cm_t35_keymap, - .keymap_size = ARRAY_SIZE(cm_t35_keymap), -}; - -static struct twl4030_keypad_data cm_t35_kp_data = { - .keymap_data = &cm_t35_keymap_data, - .rows = 3, - .cols = 3, - .rep = 1, -}; - -static struct omap2_hsmmc_info mmc[] = { - { - .mmc = 1, - .caps = MMC_CAP_4_BIT_DATA, - .gpio_cd = -EINVAL, - .gpio_wp = -EINVAL, - .deferred = true, - }, - { - .mmc = 2, - .caps = MMC_CAP_4_BIT_DATA, - .transceiver = 1, - .gpio_cd = -EINVAL, - .gpio_wp = -EINVAL, - .ocr_mask = 0x00100000, /* 3.3V */ - }, - {} /* Terminator */ -}; - -static struct usbhs_phy_data phy_data[] __initdata = { - { - .port = 1, - .reset_gpio = OMAP_MAX_GPIO_LINES + 6, - .vcc_gpio = -EINVAL, - }, - { - .port = 2, - .reset_gpio = OMAP_MAX_GPIO_LINES + 7, - .vcc_gpio = -EINVAL, - }, -}; - -static struct usbhs_omap_platform_data usbhs_bdata __initdata = { - .port_mode[0] = OMAP_EHCI_PORT_MODE_PHY, - .port_mode[1] = OMAP_EHCI_PORT_MODE_PHY, -}; - -static void __init cm_t35_init_usbh(void) -{ - int err; - - err = gpio_request_one(SB_T35_USB_HUB_RESET_GPIO, - GPIOF_OUT_INIT_LOW, "usb hub rst"); - if (err) { - pr_err("SB-T35: usb hub rst gpio request failed: %d\n", err); - } else { - udelay(10); - gpio_set_value(SB_T35_USB_HUB_RESET_GPIO, 1); - msleep(1); - } - - usbhs_init_phys(phy_data, ARRAY_SIZE(phy_data)); - usbhs_init(&usbhs_bdata); -} - -static int cm_t35_twl_gpio_setup(struct device *dev, unsigned gpio, - unsigned ngpio) -{ - int wlan_rst = gpio + 2; - - if (gpio_request_one(wlan_rst, GPIOF_OUT_INIT_HIGH, "WLAN RST") == 0) { - gpio_export(wlan_rst, 0); - udelay(10); - gpio_set_value_cansleep(wlan_rst, 0); - udelay(10); - gpio_set_value_cansleep(wlan_rst, 1); - } else { - pr_err("CM-T35: could not obtain gpio for WiFi reset\n"); - } - - /* gpio + 0 is "mmc0_cd" (input/IRQ) */ - mmc[0].gpio_cd = gpio + 0; - omap_hsmmc_late_init(mmc); - - return 0; -} - -static struct twl4030_gpio_platform_data cm_t35_gpio_data = { - .setup = cm_t35_twl_gpio_setup, -}; - -static struct twl4030_power_data cm_t35_power_data = { - .use_poweroff = true, -}; - -static struct twl4030_platform_data cm_t35_twldata = { - /* platform_data for children goes here */ - .keypad = &cm_t35_kp_data, - .gpio = &cm_t35_gpio_data, - .vmmc1 = &cm_t35_vmmc1, - .vsim = &cm_t35_vsim, - .vio = &cm_t35_vio, - .power = &cm_t35_power_data, -}; - -#if defined(CONFIG_VIDEO_OMAP3) || defined(CONFIG_VIDEO_OMAP3_MODULE) -#include <media/omap3isp.h> -#include "devices.h" - -static struct isp_platform_subdev cm_t35_isp_subdevs[] = { - { - .board_info = &(struct i2c_board_info){ - I2C_BOARD_INFO("mt9t001", 0x5d) - }, - .i2c_adapter_id = 3, - .bus = &(struct isp_bus_cfg){ - .interface = ISP_INTERFACE_PARALLEL, - .bus = { - .parallel = { - .clk_pol = 1, - }, - }, - }, - }, - { - .board_info = &(struct i2c_board_info){ - I2C_BOARD_INFO("tvp5150", 0x5c), - }, - .i2c_adapter_id = 3, - .bus = &(struct isp_bus_cfg){ - .interface = ISP_INTERFACE_PARALLEL, - .bus = { - .parallel = { - .clk_pol = 0, - }, - }, - }, - }, - { 0 }, -}; - -static struct isp_platform_data cm_t35_isp_pdata = { - .subdevs = cm_t35_isp_subdevs, -}; - -static struct regulator_consumer_supply cm_t35_camera_supplies[] = { - REGULATOR_SUPPLY("vaa", "3-005d"), - REGULATOR_SUPPLY("vdd", "3-005d"), -}; - -static void __init cm_t35_init_camera(void) -{ - struct clk *clk; - - clk = clk_register_fixed_rate(NULL, "mt9t001-clkin", NULL, CLK_IS_ROOT, - 48000000); - clk_register_clkdev(clk, NULL, "3-005d"); - - regulator_register_fixed(2, cm_t35_camera_supplies, - ARRAY_SIZE(cm_t35_camera_supplies)); - - if (omap3_init_camera(&cm_t35_isp_pdata) < 0) - pr_warn("CM-T3x: Failed registering camera device!\n"); -} - -#else -static inline void cm_t35_init_camera(void) {} -#endif /* CONFIG_VIDEO_OMAP3 */ - -static void __init cm_t35_init_i2c(void) -{ - omap3_pmic_get_config(&cm_t35_twldata, TWL_COMMON_PDATA_USB, - TWL_COMMON_REGULATOR_VDAC | - TWL_COMMON_PDATA_AUDIO); - - omap3_pmic_init("tps65930", &cm_t35_twldata); - - omap_register_i2c_bus(3, 400, NULL, 0); -} - -#ifdef CONFIG_OMAP_MUX -static struct omap_board_mux board_mux[] __initdata = { - /* nCS and IRQ for CM-T35 ethernet */ - OMAP3_MUX(GPMC_NCS5, OMAP_MUX_MODE0), - OMAP3_MUX(UART3_CTS_RCTX, OMAP_MUX_MODE4 | OMAP_PIN_INPUT_PULLUP), - - /* nCS and IRQ for SB-T35 ethernet */ - OMAP3_MUX(GPMC_NCS4, OMAP_MUX_MODE0), - OMAP3_MUX(GPMC_WAIT3, OMAP_MUX_MODE4 | OMAP_PIN_INPUT_PULLUP), - - /* PENDOWN GPIO */ - OMAP3_MUX(GPMC_NCS6, OMAP_MUX_MODE4 | OMAP_PIN_INPUT), - - /* mUSB */ - OMAP3_MUX(HSUSB0_CLK, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), - OMAP3_MUX(HSUSB0_STP, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), - OMAP3_MUX(HSUSB0_DIR, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), - OMAP3_MUX(HSUSB0_NXT, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), - OMAP3_MUX(HSUSB0_DATA0, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), - OMAP3_MUX(HSUSB0_DATA1, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), - OMAP3_MUX(HSUSB0_DATA2, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), - OMAP3_MUX(HSUSB0_DATA3, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), - OMAP3_MUX(HSUSB0_DATA4, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), - OMAP3_MUX(HSUSB0_DATA5, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), - OMAP3_MUX(HSUSB0_DATA6, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), - OMAP3_MUX(HSUSB0_DATA7, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), - - /* MMC 2 */ - OMAP3_MUX(SDMMC2_DAT4, OMAP_MUX_MODE1 | OMAP_PIN_OUTPUT), - OMAP3_MUX(SDMMC2_DAT5, OMAP_MUX_MODE1 | OMAP_PIN_OUTPUT), - OMAP3_MUX(SDMMC2_DAT6, OMAP_MUX_MODE1 | OMAP_PIN_OUTPUT), - OMAP3_MUX(SDMMC2_DAT7, OMAP_MUX_MODE1 | OMAP_PIN_INPUT), - - /* McSPI 1 */ - OMAP3_MUX(MCSPI1_CLK, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), - OMAP3_MUX(MCSPI1_SIMO, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), - OMAP3_MUX(MCSPI1_SOMI, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), - OMAP3_MUX(MCSPI1_CS0, OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLDOWN), - - /* McSPI 4 */ - OMAP3_MUX(MCBSP1_CLKR, OMAP_MUX_MODE1 | OMAP_PIN_INPUT), - OMAP3_MUX(MCBSP1_DX, OMAP_MUX_MODE1 | OMAP_PIN_INPUT), - OMAP3_MUX(MCBSP1_DR, OMAP_MUX_MODE1 | OMAP_PIN_INPUT), - OMAP3_MUX(MCBSP1_FSX, OMAP_MUX_MODE1 | OMAP_PIN_INPUT_PULLUP), - - /* McBSP 2 */ - OMAP3_MUX(MCBSP2_FSX, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), - OMAP3_MUX(MCBSP2_CLKX, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), - OMAP3_MUX(MCBSP2_DR, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), - OMAP3_MUX(MCBSP2_DX, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), - - /* serial ports */ - OMAP3_MUX(MCBSP3_CLKX, OMAP_MUX_MODE1 | OMAP_PIN_OUTPUT), - OMAP3_MUX(MCBSP3_FSX, OMAP_MUX_MODE1 | OMAP_PIN_INPUT), - OMAP3_MUX(UART1_TX, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), - OMAP3_MUX(UART1_RX, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), - - /* common DSS */ - OMAP3_MUX(DSS_PCLK, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), - OMAP3_MUX(DSS_HSYNC, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), - OMAP3_MUX(DSS_VSYNC, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), - OMAP3_MUX(DSS_ACBIAS, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), - OMAP3_MUX(DSS_DATA6, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), - OMAP3_MUX(DSS_DATA7, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), - OMAP3_MUX(DSS_DATA8, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), - OMAP3_MUX(DSS_DATA9, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), - OMAP3_MUX(DSS_DATA10, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), - OMAP3_MUX(DSS_DATA11, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), - OMAP3_MUX(DSS_DATA12, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), - OMAP3_MUX(DSS_DATA13, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), - OMAP3_MUX(DSS_DATA14, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), - OMAP3_MUX(DSS_DATA15, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), - OMAP3_MUX(DSS_DATA16, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), - OMAP3_MUX(DSS_DATA17, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), - - /* Camera */ - OMAP3_MUX(CAM_HS, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), - OMAP3_MUX(CAM_VS, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), - OMAP3_MUX(CAM_XCLKA, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), - OMAP3_MUX(CAM_PCLK, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), - OMAP3_MUX(CAM_FLD, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), - OMAP3_MUX(CAM_D0, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), - OMAP3_MUX(CAM_D1, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), - OMAP3_MUX(CAM_D2, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), - OMAP3_MUX(CAM_D3, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), - OMAP3_MUX(CAM_D4, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), - OMAP3_MUX(CAM_D5, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), - OMAP3_MUX(CAM_D6, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), - OMAP3_MUX(CAM_D7, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), - OMAP3_MUX(CAM_D8, OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLDOWN), - OMAP3_MUX(CAM_D9, OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLDOWN), - OMAP3_MUX(CAM_STROBE, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), - - OMAP3_MUX(CAM_D10, OMAP_MUX_MODE4 | OMAP_PIN_INPUT_PULLDOWN), - OMAP3_MUX(CAM_D11, OMAP_MUX_MODE4 | OMAP_PIN_INPUT_PULLDOWN), - - /* display controls */ - OMAP3_MUX(MCBSP1_FSR, OMAP_MUX_MODE4 | OMAP_PIN_OUTPUT), - OMAP3_MUX(GPMC_NCS7, OMAP_MUX_MODE4 | OMAP_PIN_OUTPUT), - OMAP3_MUX(GPMC_NCS3, OMAP_MUX_MODE4 | OMAP_PIN_OUTPUT), - - /* TPS IRQ */ - OMAP3_MUX(SYS_NIRQ, OMAP_MUX_MODE0 | OMAP_WAKEUP_EN | \ - OMAP_PIN_INPUT_PULLUP), - - { .reg_offset = OMAP_MUX_TERMINATOR }, -}; - -static void __init cm_t3x_common_dss_mux_init(int mux_mode) -{ - omap_mux_init_signal("dss_data18", mux_mode); - omap_mux_init_signal("dss_data19", mux_mode); - omap_mux_init_signal("dss_data20", mux_mode); - omap_mux_init_signal("dss_data21", mux_mode); - omap_mux_init_signal("dss_data22", mux_mode); - omap_mux_init_signal("dss_data23", mux_mode); -} - -static void __init cm_t35_init_mux(void) -{ - int mux_mode = OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT; - - omap_mux_init_signal("dss_data0.dss_data0", mux_mode); - omap_mux_init_signal("dss_data1.dss_data1", mux_mode); - omap_mux_init_signal("dss_data2.dss_data2", mux_mode); - omap_mux_init_signal("dss_data3.dss_data3", mux_mode); - omap_mux_init_signal("dss_data4.dss_data4", mux_mode); - omap_mux_init_signal("dss_data5.dss_data5", mux_mode); - cm_t3x_common_dss_mux_init(mux_mode); -} - -static void __init cm_t3730_init_mux(void) -{ - int mux_mode = OMAP_MUX_MODE3 | OMAP_PIN_OUTPUT; - - omap_mux_init_signal("sys_boot0", mux_mode); - omap_mux_init_signal("sys_boot1", mux_mode); - omap_mux_init_signal("sys_boot3", mux_mode); - omap_mux_init_signal("sys_boot4", mux_mode); - omap_mux_init_signal("sys_boot5", mux_mode); - omap_mux_init_signal("sys_boot6", mux_mode); - cm_t3x_common_dss_mux_init(mux_mode); -} -#else -static inline void cm_t35_init_mux(void) {} -static inline void cm_t3730_init_mux(void) {} -#endif - -static void __init cm_t3x_common_init(void) -{ - omap3_mux_init(board_mux, OMAP_PACKAGE_CUS); - omap_serial_init(); - omap_sdrc_init(mt46h32m32lf6_sdrc_params, - mt46h32m32lf6_sdrc_params); - omap_hsmmc_init(mmc); - cm_t35_init_i2c(); - omap_ads7846_init(1, CM_T35_GPIO_PENDOWN, 0, NULL); - cm_t35_init_ethernet(); - cm_t35_init_led(); - cm_t35_init_display(); - omap_twl4030_audio_init("cm-t3x", NULL); - - usb_bind_phy("musb-hdrc.0.auto", 0, "twl4030_usb"); - usb_musb_init(NULL); - cm_t35_init_usbh(); - cm_t35_init_camera(); -} - -static void __init cm_t35_init(void) -{ - cm_t3x_common_init(); - cm_t35_init_mux(); - cm_t35_init_nand(); -} - -static void __init cm_t3730_init(void) -{ - cm_t3x_common_init(); - cm_t3730_init_mux(); -} - -MACHINE_START(CM_T35, "Compulab CM-T35") - .atag_offset = 0x100, - .reserve = omap_reserve, - .map_io = omap3_map_io, - .init_early = omap35xx_init_early, - .init_irq = omap3_init_irq, - .init_machine = cm_t35_init, - .init_late = omap35xx_init_late, - .init_time = omap3_sync32k_timer_init, - .restart = omap3xxx_restart, -MACHINE_END - -MACHINE_START(CM_T3730, "Compulab CM-T3730") - .atag_offset = 0x100, - .reserve = omap_reserve, - .map_io = omap3_map_io, - .init_early = omap3630_init_early, - .init_irq = omap3_init_irq, - .init_machine = cm_t3730_init, - .init_late = omap3630_init_late, - .init_time = omap3_sync32k_timer_init, - .restart = omap3xxx_restart, -MACHINE_END diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-omap2/board-omap3beagle.c deleted file mode 100644 index 81de1c68b..000000000 --- a/arch/arm/mach-omap2/board-omap3beagle.c +++ /dev/null @@ -1,595 +0,0 @@ -/* - * linux/arch/arm/mach-omap2/board-omap3beagle.c - * - * Copyright (C) 2008 Texas Instruments - * - * Modified from mach-omap2/board-3430sdp.c - * - * Initial code: Syed Mohammed Khasim - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/platform_device.h> -#include <linux/delay.h> -#include <linux/err.h> -#include <linux/clk.h> -#include <linux/io.h> -#include <linux/leds.h> -#include <linux/pwm.h> -#include <linux/leds_pwm.h> -#include <linux/gpio.h> -#include <linux/input.h> -#include <linux/gpio_keys.h> -#include <linux/pm_opp.h> -#include <linux/cpu.h> - -#include <linux/mtd/mtd.h> -#include <linux/mtd/partitions.h> -#include <linux/mtd/nand.h> -#include <linux/mmc/host.h> -#include <linux/usb/phy.h> - -#include <linux/regulator/machine.h> -#include <linux/i2c/twl.h> - -#include <asm/mach-types.h> -#include <asm/mach/arch.h> -#include <asm/mach/map.h> -#include <asm/mach/flash.h> - -#include <video/omapdss.h> -#include <video/omap-panel-data.h> -#include <linux/platform_data/mtd-nand-omap2.h> - -#include "common.h" -#include "omap_device.h" -#include "gpmc.h" -#include "soc.h" -#include "mux.h" -#include "hsmmc.h" -#include "pm.h" -#include "board-flash.h" -#include "common-board-devices.h" - -#define NAND_CS 0 - -static struct pwm_lookup pwm_lookup[] = { - /* LEDB -> PMU_STAT */ - PWM_LOOKUP("twl-pwmled", 1, "leds_pwm", "beagleboard::pmu_stat", - 7812500, PWM_POLARITY_NORMAL), -}; - -static struct led_pwm pwm_leds[] = { - { - .name = "beagleboard::pmu_stat", - .max_brightness = 127, - .pwm_period_ns = 7812500, - }, -}; - -static struct led_pwm_platform_data pwm_data = { - .num_leds = ARRAY_SIZE(pwm_leds), - .leds = pwm_leds, -}; - -static struct platform_device leds_pwm = { - .name = "leds_pwm", - .id = -1, - .dev = { - .platform_data = &pwm_data, - }, -}; - -/* - * OMAP3 Beagle revision - * Run time detection of Beagle revision is done by reading GPIO. - * GPIO ID - - * AXBX = GPIO173, GPIO172, GPIO171: 1 1 1 - * C1_3 = GPIO173, GPIO172, GPIO171: 1 1 0 - * C4 = GPIO173, GPIO172, GPIO171: 1 0 1 - * XMA/XMB = GPIO173, GPIO172, GPIO171: 0 0 0 - * XMC = GPIO173, GPIO172, GPIO171: 0 1 0 - */ -enum { - OMAP3BEAGLE_BOARD_UNKN = 0, - OMAP3BEAGLE_BOARD_AXBX, - OMAP3BEAGLE_BOARD_C1_3, - OMAP3BEAGLE_BOARD_C4, - OMAP3BEAGLE_BOARD_XM, - OMAP3BEAGLE_BOARD_XMC, -}; - -static u8 omap3_beagle_version; - -/* - * Board-specific configuration - * Defaults to BeagleBoard-xMC - */ -static struct { - int mmc1_gpio_wp; - bool usb_pwr_level; /* 0 - Active Low, 1 - Active High */ - int dvi_pd_gpio; - int usr_button_gpio; - int mmc_caps; -} beagle_config = { - .mmc1_gpio_wp = -EINVAL, - .usb_pwr_level = 0, - .dvi_pd_gpio = -EINVAL, - .usr_button_gpio = 4, - .mmc_caps = MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA, -}; - -static struct gpio omap3_beagle_rev_gpios[] __initdata = { - { 171, GPIOF_IN, "rev_id_0" }, - { 172, GPIOF_IN, "rev_id_1" }, - { 173, GPIOF_IN, "rev_id_2" }, -}; - -static void __init omap3_beagle_init_rev(void) -{ - int ret; - u16 beagle_rev = 0; - - omap_mux_init_gpio(171, OMAP_PIN_INPUT_PULLUP); - omap_mux_init_gpio(172, OMAP_PIN_INPUT_PULLUP); - omap_mux_init_gpio(173, OMAP_PIN_INPUT_PULLUP); - - ret = gpio_request_array(omap3_beagle_rev_gpios, - ARRAY_SIZE(omap3_beagle_rev_gpios)); - if (ret < 0) { - printk(KERN_ERR "Unable to get revision detection GPIO pins\n"); - omap3_beagle_version = OMAP3BEAGLE_BOARD_UNKN; - return; - } - - beagle_rev = gpio_get_value(171) | (gpio_get_value(172) << 1) - | (gpio_get_value(173) << 2); - - gpio_free_array(omap3_beagle_rev_gpios, - ARRAY_SIZE(omap3_beagle_rev_gpios)); - - switch (beagle_rev) { - case 7: - printk(KERN_INFO "OMAP3 Beagle Rev: Ax/Bx\n"); - omap3_beagle_version = OMAP3BEAGLE_BOARD_AXBX; - beagle_config.mmc1_gpio_wp = 29; - beagle_config.dvi_pd_gpio = 170; - beagle_config.usr_button_gpio = 7; - break; - case 6: - printk(KERN_INFO "OMAP3 Beagle Rev: C1/C2/C3\n"); - omap3_beagle_version = OMAP3BEAGLE_BOARD_C1_3; - beagle_config.mmc1_gpio_wp = 23; - beagle_config.dvi_pd_gpio = 170; - beagle_config.usr_button_gpio = 7; - break; - case 5: - printk(KERN_INFO "OMAP3 Beagle Rev: C4\n"); - omap3_beagle_version = OMAP3BEAGLE_BOARD_C4; - beagle_config.mmc1_gpio_wp = 23; - beagle_config.dvi_pd_gpio = 170; - beagle_config.usr_button_gpio = 7; - break; - case 0: - printk(KERN_INFO "OMAP3 Beagle Rev: xM Ax/Bx\n"); - omap3_beagle_version = OMAP3BEAGLE_BOARD_XM; - beagle_config.usb_pwr_level = 1; - beagle_config.mmc_caps &= ~MMC_CAP_8_BIT_DATA; - break; - case 2: - printk(KERN_INFO "OMAP3 Beagle Rev: xM C\n"); - omap3_beagle_version = OMAP3BEAGLE_BOARD_XMC; - beagle_config.mmc_caps &= ~MMC_CAP_8_BIT_DATA; - break; - default: - printk(KERN_INFO "OMAP3 Beagle Rev: unknown %hd\n", beagle_rev); - omap3_beagle_version = OMAP3BEAGLE_BOARD_UNKN; - } -} - -static struct mtd_partition omap3beagle_nand_partitions[] = { - /* All the partition sizes are listed in terms of NAND block size */ - { - .name = "X-Loader", - .offset = 0, - .size = 4 * NAND_BLOCK_SIZE, - .mask_flags = MTD_WRITEABLE, /* force read-only */ - }, - { - .name = "U-Boot", - .offset = MTDPART_OFS_APPEND, /* Offset = 0x80000 */ - .size = 15 * NAND_BLOCK_SIZE, - .mask_flags = MTD_WRITEABLE, /* force read-only */ - }, - { - .name = "U-Boot Env", - .offset = MTDPART_OFS_APPEND, /* Offset = 0x260000 */ - .size = 1 * NAND_BLOCK_SIZE, - }, - { - .name = "Kernel", - .offset = MTDPART_OFS_APPEND, /* Offset = 0x280000 */ - .size = 32 * NAND_BLOCK_SIZE, - }, - { - .name = "File System", - .offset = MTDPART_OFS_APPEND, /* Offset = 0x680000 */ - .size = MTDPART_SIZ_FULL, - }, -}; - -/* DSS */ - -static struct connector_dvi_platform_data beagle_dvi_connector_pdata = { - .name = "dvi", - .source = "tfp410.0", - .i2c_bus_num = 3, -}; - -static struct platform_device beagle_dvi_connector_device = { - .name = "connector-dvi", - .id = 0, - .dev.platform_data = &beagle_dvi_connector_pdata, -}; - -static struct encoder_tfp410_platform_data beagle_tfp410_pdata = { - .name = "tfp410.0", - .source = "dpi.0", - .data_lines = 24, - .power_down_gpio = -1, -}; - -static struct platform_device beagle_tfp410_device = { - .name = "tfp410", - .id = 0, - .dev.platform_data = &beagle_tfp410_pdata, -}; - -static struct connector_atv_platform_data beagle_tv_pdata = { - .name = "tv", - .source = "venc.0", - .connector_type = OMAP_DSS_VENC_TYPE_SVIDEO, - .invert_polarity = false, -}; - -static struct platform_device beagle_tv_connector_device = { - .name = "connector-analog-tv", - .id = 0, - .dev.platform_data = &beagle_tv_pdata, -}; - -static struct omap_dss_board_info beagle_dss_data = { - .default_display_name = "dvi", -}; - -#include "sdram-micron-mt46h32m32lf-6.h" - -static struct omap2_hsmmc_info mmc[] = { - { - .mmc = 1, - .caps = MMC_CAP_4_BIT_DATA, - .gpio_wp = -EINVAL, - .deferred = true, - }, - {} /* Terminator */ -}; - -static struct regulator_consumer_supply beagle_vmmc1_supply[] = { - REGULATOR_SUPPLY("vmmc", "omap_hsmmc.0"), -}; - -static struct regulator_consumer_supply beagle_vsim_supply[] = { - REGULATOR_SUPPLY("vmmc_aux", "omap_hsmmc.0"), -}; - -static struct gpio_led gpio_leds[]; - -static struct usbhs_phy_data phy_data[] = { - { - .port = 2, - .reset_gpio = 147, - .vcc_gpio = -1, /* updated in beagle_twl_gpio_setup */ - .vcc_polarity = 1, /* updated in beagle_twl_gpio_setup */ - }, -}; - -static int beagle_twl_gpio_setup(struct device *dev, - unsigned gpio, unsigned ngpio) -{ - int r; - - mmc[0].gpio_wp = beagle_config.mmc1_gpio_wp; - /* gpio + 0 is "mmc0_cd" (input/IRQ) */ - mmc[0].gpio_cd = gpio + 0; - omap_hsmmc_late_init(mmc); - - /* - * TWL4030_GPIO_MAX + 0 == ledA, EHCI nEN_USB_PWR (out, XM active - * high / others active low) - * DVI reset GPIO is different between beagle revisions - */ - /* Valid for all -xM revisions */ - if (cpu_is_omap3630()) { - /* - * gpio + 1 on Xm controls the TFP410's enable line (active low) - * gpio + 2 control varies depending on the board rev as below: - * P7/P8 revisions(prototype): Camera EN - * A2+ revisions (production): LDO (DVI, serial, led blocks) - */ - r = gpio_request_one(gpio + 1, GPIOF_OUT_INIT_LOW, - "nDVI_PWR_EN"); - if (r) - pr_err("%s: unable to configure nDVI_PWR_EN\n", - __func__); - - beagle_config.dvi_pd_gpio = gpio + 2; - - } else { - /* - * REVISIT: need ehci-omap hooks for external VBUS - * power switch and overcurrent detect - */ - if (gpio_request_one(gpio + 1, GPIOF_IN, "EHCI_nOC")) - pr_err("%s: unable to configure EHCI_nOC\n", __func__); - } - beagle_tfp410_pdata.power_down_gpio = beagle_config.dvi_pd_gpio; - - platform_device_register(&beagle_tfp410_device); - platform_device_register(&beagle_dvi_connector_device); - platform_device_register(&beagle_tv_connector_device); - - /* TWL4030_GPIO_MAX i.e. LED_GPO controls HS USB Port 2 power */ - phy_data[0].vcc_gpio = gpio + TWL4030_GPIO_MAX; - phy_data[0].vcc_polarity = beagle_config.usb_pwr_level; - - usbhs_init_phys(phy_data, ARRAY_SIZE(phy_data)); - return 0; -} - -static struct twl4030_gpio_platform_data beagle_gpio_data = { - .use_leds = true, - .pullups = BIT(1), - .pulldowns = BIT(2) | BIT(6) | BIT(7) | BIT(8) | BIT(13) - | BIT(15) | BIT(16) | BIT(17), - .setup = beagle_twl_gpio_setup, -}; - -/* VMMC1 for MMC1 pins CMD, CLK, DAT0..DAT3 (20 mA, plus card == max 220 mA) */ -static struct regulator_init_data beagle_vmmc1 = { - .constraints = { - .min_uV = 1850000, - .max_uV = 3150000, - .valid_modes_mask = REGULATOR_MODE_NORMAL - | REGULATOR_MODE_STANDBY, - .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE - | REGULATOR_CHANGE_MODE - | REGULATOR_CHANGE_STATUS, - }, - .num_consumer_supplies = ARRAY_SIZE(beagle_vmmc1_supply), - .consumer_supplies = beagle_vmmc1_supply, -}; - -/* VSIM for MMC1 pins DAT4..DAT7 (2 mA, plus card == max 50 mA) */ -static struct regulator_init_data beagle_vsim = { - .constraints = { - .min_uV = 1800000, - .max_uV = 3000000, - .valid_modes_mask = REGULATOR_MODE_NORMAL - | REGULATOR_MODE_STANDBY, - .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE - | REGULATOR_CHANGE_MODE - | REGULATOR_CHANGE_STATUS, - }, - .num_consumer_supplies = ARRAY_SIZE(beagle_vsim_supply), - .consumer_supplies = beagle_vsim_supply, -}; - -static struct twl4030_platform_data beagle_twldata = { - /* platform_data for children goes here */ - .gpio = &beagle_gpio_data, - .vmmc1 = &beagle_vmmc1, - .vsim = &beagle_vsim, -}; - -static struct i2c_board_info __initdata beagle_i2c_eeprom[] = { - { - I2C_BOARD_INFO("eeprom", 0x50), - }, -}; - -static int __init omap3_beagle_i2c_init(void) -{ - omap3_pmic_get_config(&beagle_twldata, - TWL_COMMON_PDATA_USB | TWL_COMMON_PDATA_MADC | - TWL_COMMON_PDATA_AUDIO, - TWL_COMMON_REGULATOR_VDAC | TWL_COMMON_REGULATOR_VPLL2); - - beagle_twldata.vpll2->constraints.name = "VDVI"; - - omap3_pmic_init("twl4030", &beagle_twldata); - /* Bus 3 is attached to the DVI port where devices like the pico DLP - * projector don't work reliably with 400kHz */ - omap_register_i2c_bus(3, 100, beagle_i2c_eeprom, ARRAY_SIZE(beagle_i2c_eeprom)); - return 0; -} - -static struct gpio_led gpio_leds[] = { - { - .name = "beagleboard::usr0", - .default_trigger = "heartbeat", - .gpio = 150, - }, - { - .name = "beagleboard::usr1", - .default_trigger = "mmc0", - .gpio = 149, - }, -}; - -static struct gpio_led_platform_data gpio_led_info = { - .leds = gpio_leds, - .num_leds = ARRAY_SIZE(gpio_leds), -}; - -static struct platform_device leds_gpio = { - .name = "leds-gpio", - .id = -1, - .dev = { - .platform_data = &gpio_led_info, - }, -}; - -static struct gpio_keys_button gpio_buttons[] = { - { - .code = BTN_EXTRA, - /* Dynamically assigned depending on board */ - .gpio = -EINVAL, - .desc = "user", - .wakeup = 1, - }, -}; - -static struct gpio_keys_platform_data gpio_key_info = { - .buttons = gpio_buttons, - .nbuttons = ARRAY_SIZE(gpio_buttons), -}; - -static struct platform_device keys_gpio = { - .name = "gpio-keys", - .id = -1, - .dev = { - .platform_data = &gpio_key_info, - }, -}; - -static struct platform_device madc_hwmon = { - .name = "twl4030_madc_hwmon", - .id = -1, -}; - -static struct platform_device *omap3_beagle_devices[] __initdata = { - &leds_gpio, - &keys_gpio, - &madc_hwmon, - &leds_pwm, -}; - -static struct usbhs_omap_platform_data usbhs_bdata __initdata = { - .port_mode[1] = OMAP_EHCI_PORT_MODE_PHY, -}; - -#ifdef CONFIG_OMAP_MUX -static struct omap_board_mux board_mux[] __initdata = { - { .reg_offset = OMAP_MUX_TERMINATOR }, -}; -#endif - -static int __init beagle_opp_init(void) -{ - int r = 0; - - if (!machine_is_omap3_beagle()) - return 0; - - /* Initialize the omap3 opp table if not already created. */ - r = omap3_opp_init(); - if (r < 0 && (r != -EEXIST)) { - pr_err("%s: opp default init failed\n", __func__); - return r; - } - - /* Custom OPP enabled for all xM versions */ - if (cpu_is_omap3630()) { - struct device *mpu_dev, *iva_dev; - - mpu_dev = get_cpu_device(0); - iva_dev = omap_device_get_by_hwmod_name("iva"); - - if (!mpu_dev || IS_ERR(iva_dev)) { - pr_err("%s: Aiee.. no mpu/dsp devices? %p %p\n", - __func__, mpu_dev, iva_dev); - return -ENODEV; - } - /* Enable MPU 1GHz and lower opps */ - r = dev_pm_opp_enable(mpu_dev, 800000000); - /* TODO: MPU 1GHz needs SR and ABB */ - - /* Enable IVA 800MHz and lower opps */ - r |= dev_pm_opp_enable(iva_dev, 660000000); - /* TODO: DSP 800MHz needs SR and ABB */ - if (r) { - pr_err("%s: failed to enable higher opp %d\n", - __func__, r); - /* - * Cleanup - disable the higher freqs - we dont care - * about the results - */ - dev_pm_opp_disable(mpu_dev, 800000000); - dev_pm_opp_disable(iva_dev, 660000000); - } - } - return 0; -} -omap_device_initcall(beagle_opp_init); - -static void __init omap3_beagle_init(void) -{ - omap3_mux_init(board_mux, OMAP_PACKAGE_CBB); - omap3_beagle_init_rev(); - - if (gpio_is_valid(beagle_config.mmc1_gpio_wp)) - omap_mux_init_gpio(beagle_config.mmc1_gpio_wp, OMAP_PIN_INPUT); - mmc[0].caps = beagle_config.mmc_caps; - omap_hsmmc_init(mmc); - - omap3_beagle_i2c_init(); - - gpio_buttons[0].gpio = beagle_config.usr_button_gpio; - - platform_add_devices(omap3_beagle_devices, - ARRAY_SIZE(omap3_beagle_devices)); - if (gpio_is_valid(beagle_config.dvi_pd_gpio)) - omap_mux_init_gpio(beagle_config.dvi_pd_gpio, OMAP_PIN_OUTPUT); - omap_display_init(&beagle_dss_data); - - omap_serial_init(); - omap_sdrc_init(mt46h32m32lf6_sdrc_params, - mt46h32m32lf6_sdrc_params); - - usb_bind_phy("musb-hdrc.0.auto", 0, "twl4030_usb"); - usb_musb_init(NULL); - - usbhs_init(&usbhs_bdata); - - board_nand_init(omap3beagle_nand_partitions, - ARRAY_SIZE(omap3beagle_nand_partitions), NAND_CS, - NAND_BUSWIDTH_16, NULL); - omap_twl4030_audio_init("omap3beagle", NULL); - - /* Ensure msecure is mux'd to be able to set the RTC. */ - omap_mux_init_signal("sys_drm_msecure", OMAP_PIN_OFF_OUTPUT_HIGH); - - /* Ensure SDRC pins are mux'd for self-refresh */ - omap_mux_init_signal("sdrc_cke0", OMAP_PIN_OUTPUT); - omap_mux_init_signal("sdrc_cke1", OMAP_PIN_OUTPUT); - - pwm_add_table(pwm_lookup, ARRAY_SIZE(pwm_lookup)); -} - -MACHINE_START(OMAP3_BEAGLE, "OMAP3 Beagle Board") - /* Maintainer: Syed Mohammed Khasim - http://beagleboard.org */ - .atag_offset = 0x100, - .reserve = omap_reserve, - .map_io = omap3_map_io, - .init_early = omap3_init_early, - .init_irq = omap3_init_irq, - .init_machine = omap3_beagle_init, - .init_late = omap3_init_late, - .init_time = omap3_secure_sync32k_timer_init, - .restart = omap3xxx_restart, -MACHINE_END diff --git a/arch/arm/mach-omap2/board-overo.c b/arch/arm/mach-omap2/board-overo.c deleted file mode 100644 index 2dae6ccd3..000000000 --- a/arch/arm/mach-omap2/board-overo.c +++ /dev/null @@ -1,571 +0,0 @@ -/* - * board-overo.c (Gumstix Overo) - * - * Initial code: Steve Sakoman <steve@sakoman.com> - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * version 2 as published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA - * 02110-1301 USA - * - */ - -#include <linux/clk.h> -#include <linux/delay.h> -#include <linux/err.h> -#include <linux/init.h> -#include <linux/io.h> -#include <linux/gpio.h> -#include <linux/kernel.h> -#include <linux/platform_device.h> -#include <linux/i2c/twl.h> -#include <linux/regulator/machine.h> -#include <linux/regulator/fixed.h> -#include <linux/spi/spi.h> - -#include <linux/mtd/mtd.h> -#include <linux/mtd/nand.h> -#include <linux/mtd/partitions.h> -#include <linux/mmc/host.h> -#include <linux/usb/phy.h> - -#include <linux/platform_data/mtd-nand-omap2.h> -#include <linux/platform_data/spi-omap2-mcspi.h> - -#include <asm/mach-types.h> -#include <asm/mach/arch.h> -#include <asm/mach/flash.h> -#include <asm/mach/map.h> - -#include <video/omapdss.h> -#include <video/omap-panel-data.h> - -#include "common.h" -#include "mux.h" -#include "sdram-micron-mt46h32m32lf-6.h" -#include "gpmc.h" -#include "hsmmc.h" -#include "board-flash.h" -#include "common-board-devices.h" - -#define NAND_CS 0 - -#define OVERO_GPIO_BT_XGATE 15 -#define OVERO_GPIO_W2W_NRESET 16 -#define OVERO_GPIO_PENDOWN 114 -#define OVERO_GPIO_BT_NRESET 164 -#define OVERO_GPIO_USBH_CPEN 168 -#define OVERO_GPIO_USBH_NRESET 183 - -#define OVERO_SMSC911X_CS 5 -#define OVERO_SMSC911X_GPIO 176 -#define OVERO_SMSC911X_NRESET 64 -#define OVERO_SMSC911X2_CS 4 -#define OVERO_SMSC911X2_GPIO 65 - -/* whether to register LCD35 instead of LCD43 */ -static bool overo_use_lcd35; - -#if defined(CONFIG_TOUCHSCREEN_ADS7846) || \ - defined(CONFIG_TOUCHSCREEN_ADS7846_MODULE) - -/* fixed regulator for ads7846 */ -static struct regulator_consumer_supply ads7846_supply[] = { - REGULATOR_SUPPLY("vcc", "spi1.0"), -}; - -static struct regulator_init_data vads7846_regulator = { - .constraints = { - .valid_ops_mask = REGULATOR_CHANGE_STATUS, - }, - .num_consumer_supplies = ARRAY_SIZE(ads7846_supply), - .consumer_supplies = ads7846_supply, -}; - -static struct fixed_voltage_config vads7846 = { - .supply_name = "vads7846", - .microvolts = 3300000, /* 3.3V */ - .gpio = -EINVAL, - .startup_delay = 0, - .init_data = &vads7846_regulator, -}; - -static struct platform_device vads7846_device = { - .name = "reg-fixed-voltage", - .id = 1, - .dev = { - .platform_data = &vads7846, - }, -}; - -static void __init overo_ads7846_init(void) -{ - omap_ads7846_init(1, OVERO_GPIO_PENDOWN, 0, NULL); - platform_device_register(&vads7846_device); -} - -#else -static inline void __init overo_ads7846_init(void) { return; } -#endif - -#if defined(CONFIG_SMSC911X) || defined(CONFIG_SMSC911X_MODULE) - -#include <linux/smsc911x.h> -#include "gpmc-smsc911x.h" - -static struct omap_smsc911x_platform_data smsc911x_cfg = { - .id = 0, - .cs = OVERO_SMSC911X_CS, - .gpio_irq = OVERO_SMSC911X_GPIO, - .gpio_reset = OVERO_SMSC911X_NRESET, - .flags = SMSC911X_USE_32BIT, -}; - -static struct omap_smsc911x_platform_data smsc911x2_cfg = { - .id = 1, - .cs = OVERO_SMSC911X2_CS, - .gpio_irq = OVERO_SMSC911X2_GPIO, - .gpio_reset = -EINVAL, - .flags = SMSC911X_USE_32BIT, -}; - -static void __init overo_init_smsc911x(void) -{ - gpmc_smsc911x_init(&smsc911x_cfg); - gpmc_smsc911x_init(&smsc911x2_cfg); -} - -#else -static inline void __init overo_init_smsc911x(void) { return; } -#endif - -/* DSS */ -#define OVERO_GPIO_LCD_EN 144 -#define OVERO_GPIO_LCD_BL 145 - -static struct connector_atv_platform_data overo_tv_pdata = { - .name = "tv", - .source = "venc.0", - .connector_type = OMAP_DSS_VENC_TYPE_SVIDEO, - .invert_polarity = false, -}; - -static struct platform_device overo_tv_connector_device = { - .name = "connector-analog-tv", - .id = 0, - .dev.platform_data = &overo_tv_pdata, -}; - -static const struct display_timing overo_lcd43_videomode = { - .pixelclock = { 0, 9200000, 0 }, - - .hactive = { 0, 480, 0 }, - .hfront_porch = { 0, 8, 0 }, - .hback_porch = { 0, 4, 0 }, - .hsync_len = { 0, 41, 0 }, - - .vactive = { 0, 272, 0 }, - .vfront_porch = { 0, 4, 0 }, - .vback_porch = { 0, 2, 0 }, - .vsync_len = { 0, 10, 0 }, - - .flags = DISPLAY_FLAGS_HSYNC_LOW | DISPLAY_FLAGS_VSYNC_LOW | - DISPLAY_FLAGS_DE_HIGH | DISPLAY_FLAGS_PIXDATA_POSEDGE, -}; - -static struct panel_dpi_platform_data overo_lcd43_pdata = { - .name = "lcd43", - .source = "dpi.0", - - .data_lines = 24, - - .display_timing = &overo_lcd43_videomode, - - .enable_gpio = OVERO_GPIO_LCD_EN, - .backlight_gpio = OVERO_GPIO_LCD_BL, -}; - -static struct platform_device overo_lcd43_device = { - .name = "panel-dpi", - .id = 0, - .dev.platform_data = &overo_lcd43_pdata, -}; - -static struct connector_dvi_platform_data overo_dvi_connector_pdata = { - .name = "dvi", - .source = "tfp410.0", - .i2c_bus_num = 3, -}; - -static struct platform_device overo_dvi_connector_device = { - .name = "connector-dvi", - .id = 0, - .dev.platform_data = &overo_dvi_connector_pdata, -}; - -static struct encoder_tfp410_platform_data overo_tfp410_pdata = { - .name = "tfp410.0", - .source = "dpi.0", - .data_lines = 24, - .power_down_gpio = -1, -}; - -static struct platform_device overo_tfp410_device = { - .name = "tfp410", - .id = 0, - .dev.platform_data = &overo_tfp410_pdata, -}; - -static struct omap_dss_board_info overo_dss_data = { - .default_display_name = "lcd43", -}; - -static void __init overo_display_init(void) -{ - omap_display_init(&overo_dss_data); - - if (!overo_use_lcd35) - platform_device_register(&overo_lcd43_device); - platform_device_register(&overo_tfp410_device); - platform_device_register(&overo_dvi_connector_device); - platform_device_register(&overo_tv_connector_device); -} - -static struct mtd_partition overo_nand_partitions[] = { - { - .name = "xloader", - .offset = 0, /* Offset = 0x00000 */ - .size = 4 * NAND_BLOCK_SIZE, - .mask_flags = MTD_WRITEABLE - }, - { - .name = "uboot", - .offset = MTDPART_OFS_APPEND, /* Offset = 0x80000 */ - .size = 14 * NAND_BLOCK_SIZE, - }, - { - .name = "uboot environment", - .offset = MTDPART_OFS_APPEND, /* Offset = 0x240000 */ - .size = 2 * NAND_BLOCK_SIZE, - }, - { - .name = "linux", - .offset = MTDPART_OFS_APPEND, /* Offset = 0x280000 */ - .size = 32 * NAND_BLOCK_SIZE, - }, - { - .name = "rootfs", - .offset = MTDPART_OFS_APPEND, /* Offset = 0x680000 */ - .size = MTDPART_SIZ_FULL, - }, -}; - -static struct omap2_hsmmc_info mmc[] = { - { - .mmc = 1, - .caps = MMC_CAP_4_BIT_DATA, - .gpio_cd = -EINVAL, - .gpio_wp = -EINVAL, - }, - { - .mmc = 2, - .caps = MMC_CAP_4_BIT_DATA, - .gpio_cd = -EINVAL, - .gpio_wp = -EINVAL, - .transceiver = true, - .ocr_mask = 0x00100000, /* 3.3V */ - }, - {} /* Terminator */ -}; - -static struct regulator_consumer_supply overo_vmmc1_supply[] = { - REGULATOR_SUPPLY("vmmc", "omap_hsmmc.0"), -}; - -#if defined(CONFIG_LEDS_GPIO) || defined(CONFIG_LEDS_GPIO_MODULE) -#include <linux/leds.h> - -static struct gpio_led gpio_leds[] = { - { - .name = "overo:red:gpio21", - .default_trigger = "heartbeat", - .gpio = 21, - .active_low = true, - }, - { - .name = "overo:blue:gpio22", - .default_trigger = "none", - .gpio = 22, - .active_low = true, - }, - { - .name = "overo:blue:COM", - .default_trigger = "mmc0", - .gpio = -EINVAL, /* gets replaced */ - .active_low = true, - }, -}; - -static struct gpio_led_platform_data gpio_leds_pdata = { - .leds = gpio_leds, - .num_leds = ARRAY_SIZE(gpio_leds), -}; - -static struct platform_device gpio_leds_device = { - .name = "leds-gpio", - .id = -1, - .dev = { - .platform_data = &gpio_leds_pdata, - }, -}; - -static void __init overo_init_led(void) -{ - platform_device_register(&gpio_leds_device); -} - -#else -static inline void __init overo_init_led(void) { return; } -#endif - -#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE) -#include <linux/input.h> -#include <linux/gpio_keys.h> - -static struct gpio_keys_button gpio_buttons[] = { - { - .code = BTN_0, - .gpio = 23, - .desc = "button0", - .wakeup = 1, - }, - { - .code = BTN_1, - .gpio = 14, - .desc = "button1", - .wakeup = 1, - }, -}; - -static struct gpio_keys_platform_data gpio_keys_pdata = { - .buttons = gpio_buttons, - .nbuttons = ARRAY_SIZE(gpio_buttons), -}; - -static struct platform_device gpio_keys_device = { - .name = "gpio-keys", - .id = -1, - .dev = { - .platform_data = &gpio_keys_pdata, - }, -}; - -static void __init overo_init_keys(void) -{ - platform_device_register(&gpio_keys_device); -} - -#else -static inline void __init overo_init_keys(void) { return; } -#endif - -static int overo_twl_gpio_setup(struct device *dev, - unsigned gpio, unsigned ngpio) -{ -#if defined(CONFIG_LEDS_GPIO) || defined(CONFIG_LEDS_GPIO_MODULE) - /* TWL4030_GPIO_MAX + 1 == ledB, PMU_STAT (out, active low LED) */ - gpio_leds[2].gpio = gpio + TWL4030_GPIO_MAX + 1; -#endif - - return 0; -} - -static struct twl4030_gpio_platform_data overo_gpio_data = { - .use_leds = true, - .setup = overo_twl_gpio_setup, -}; - -static struct regulator_init_data overo_vmmc1 = { - .constraints = { - .min_uV = 1850000, - .max_uV = 3150000, - .valid_modes_mask = REGULATOR_MODE_NORMAL - | REGULATOR_MODE_STANDBY, - .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE - | REGULATOR_CHANGE_MODE - | REGULATOR_CHANGE_STATUS, - }, - .num_consumer_supplies = ARRAY_SIZE(overo_vmmc1_supply), - .consumer_supplies = overo_vmmc1_supply, -}; - -static struct twl4030_platform_data overo_twldata = { - .gpio = &overo_gpio_data, - .vmmc1 = &overo_vmmc1, -}; - -static int __init overo_i2c_init(void) -{ - omap3_pmic_get_config(&overo_twldata, - TWL_COMMON_PDATA_USB | TWL_COMMON_PDATA_AUDIO, - TWL_COMMON_REGULATOR_VDAC | TWL_COMMON_REGULATOR_VPLL2); - - overo_twldata.vpll2->constraints.name = "VDVI"; - - omap3_pmic_init("tps65950", &overo_twldata); - /* i2c2 pins are used for gpio */ - omap_register_i2c_bus(3, 400, NULL, 0); - return 0; -} - -static struct panel_lb035q02_platform_data overo_lcd35_pdata = { - .name = "lcd35", - .source = "dpi.0", - - .data_lines = 24, - - .enable_gpio = OVERO_GPIO_LCD_EN, - .backlight_gpio = OVERO_GPIO_LCD_BL, -}; - -/* - * NOTE: We need to add either the lgphilips panel, or the lcd43 panel. The - * selection is done based on the overo_use_lcd35 field. If new SPI - * devices are added here, extra work is needed to make only the lgphilips panel - * affected by the overo_use_lcd35 field. - */ -static struct spi_board_info overo_spi_board_info[] __initdata = { - { - .modalias = "panel_lgphilips_lb035q02", - .bus_num = 1, - .chip_select = 1, - .max_speed_hz = 500000, - .mode = SPI_MODE_3, - .platform_data = &overo_lcd35_pdata, - }, -}; - -static int __init overo_spi_init(void) -{ - overo_ads7846_init(); - - if (overo_use_lcd35) { - spi_register_board_info(overo_spi_board_info, - ARRAY_SIZE(overo_spi_board_info)); - } - return 0; -} - -static struct usbhs_phy_data phy_data[] __initdata = { - { - .port = 2, - .reset_gpio = OVERO_GPIO_USBH_NRESET, - .vcc_gpio = -EINVAL, - }, -}; - -static struct usbhs_omap_platform_data usbhs_bdata __initdata = { - .port_mode[1] = OMAP_EHCI_PORT_MODE_PHY, -}; - -#ifdef CONFIG_OMAP_MUX -static struct omap_board_mux board_mux[] __initdata = { - { .reg_offset = OMAP_MUX_TERMINATOR }, -}; -#endif - -static struct gpio overo_bt_gpios[] __initdata = { - { OVERO_GPIO_BT_XGATE, GPIOF_OUT_INIT_LOW, "lcd enable" }, - { OVERO_GPIO_BT_NRESET, GPIOF_OUT_INIT_HIGH, "lcd bl enable" }, -}; - -static struct regulator_consumer_supply dummy_supplies[] = { - REGULATOR_SUPPLY("vddvario", "smsc911x.0"), - REGULATOR_SUPPLY("vdd33a", "smsc911x.0"), - REGULATOR_SUPPLY("vddvario", "smsc911x.1"), - REGULATOR_SUPPLY("vdd33a", "smsc911x.1"), -}; - -static void __init overo_init(void) -{ - int ret; - - if (strstr(boot_command_line, "omapdss.def_disp=lcd35")) - overo_use_lcd35 = true; - - regulator_register_fixed(0, dummy_supplies, ARRAY_SIZE(dummy_supplies)); - omap3_mux_init(board_mux, OMAP_PACKAGE_CBB); - overo_i2c_init(); - omap_hsmmc_init(mmc); - omap_serial_init(); - omap_sdrc_init(mt46h32m32lf6_sdrc_params, - mt46h32m32lf6_sdrc_params); - board_nand_init(overo_nand_partitions, - ARRAY_SIZE(overo_nand_partitions), NAND_CS, 0, NULL); - usb_bind_phy("musb-hdrc.0.auto", 0, "twl4030_usb"); - usb_musb_init(NULL); - - usbhs_init_phys(phy_data, ARRAY_SIZE(phy_data)); - usbhs_init(&usbhs_bdata); - overo_spi_init(); - overo_init_smsc911x(); - overo_init_led(); - overo_init_keys(); - omap_twl4030_audio_init("overo", NULL); - - overo_display_init(); - - /* Ensure SDRC pins are mux'd for self-refresh */ - omap_mux_init_signal("sdrc_cke0", OMAP_PIN_OUTPUT); - omap_mux_init_signal("sdrc_cke1", OMAP_PIN_OUTPUT); - - ret = gpio_request_one(OVERO_GPIO_W2W_NRESET, GPIOF_OUT_INIT_HIGH, - "OVERO_GPIO_W2W_NRESET"); - if (ret == 0) { - gpio_export(OVERO_GPIO_W2W_NRESET, 0); - gpio_set_value(OVERO_GPIO_W2W_NRESET, 0); - udelay(10); - gpio_set_value(OVERO_GPIO_W2W_NRESET, 1); - } else { - pr_err("could not obtain gpio for OVERO_GPIO_W2W_NRESET\n"); - } - - ret = gpio_request_array(overo_bt_gpios, ARRAY_SIZE(overo_bt_gpios)); - if (ret) { - pr_err("%s: could not obtain BT gpios\n", __func__); - } else { - gpio_export(OVERO_GPIO_BT_XGATE, 0); - gpio_export(OVERO_GPIO_BT_NRESET, 0); - gpio_set_value(OVERO_GPIO_BT_NRESET, 0); - mdelay(6); - gpio_set_value(OVERO_GPIO_BT_NRESET, 1); - } - - ret = gpio_request_one(OVERO_GPIO_USBH_CPEN, GPIOF_OUT_INIT_HIGH, - "OVERO_GPIO_USBH_CPEN"); - if (ret == 0) - gpio_export(OVERO_GPIO_USBH_CPEN, 0); - else - pr_err("could not obtain gpio for OVERO_GPIO_USBH_CPEN\n"); -} - -MACHINE_START(OVERO, "Gumstix Overo") - .atag_offset = 0x100, - .reserve = omap_reserve, - .map_io = omap3_map_io, - .init_early = omap35xx_init_early, - .init_irq = omap3_init_irq, - .init_machine = overo_init, - .init_late = omap35xx_init_late, - .init_time = omap3_sync32k_timer_init, - .restart = omap3xxx_restart, -MACHINE_END diff --git a/arch/arm/mach-omap2/clkt2xxx_virt_prcm_set.c b/arch/arm/mach-omap2/clkt2xxx_virt_prcm_set.c index 85e0b0c06..b64d717bf 100644 --- a/arch/arm/mach-omap2/clkt2xxx_virt_prcm_set.c +++ b/arch/arm/mach-omap2/clkt2xxx_virt_prcm_set.c @@ -232,14 +232,12 @@ void omap2xxx_clkt_vps_init(void) struct clk_hw_omap *hw = NULL; struct clk *clk; const char *parent_name = "mpu_ck"; - struct clk_lookup *lookup = NULL; omap2xxx_clkt_vps_late_init(); omap2xxx_clkt_vps_check_bootloader_rates(); hw = kzalloc(sizeof(*hw), GFP_KERNEL); - lookup = kzalloc(sizeof(*lookup), GFP_KERNEL); - if (!hw || !lookup) + if (!hw) goto cleanup; init.name = "virt_prcm_set"; init.ops = &virt_prcm_set_ops; @@ -249,15 +247,9 @@ void omap2xxx_clkt_vps_init(void) hw->hw.init = &init; clk = clk_register(NULL, &hw->hw); - - lookup->dev_id = NULL; - lookup->con_id = "cpufreq_ck"; - lookup->clk = clk; - - clkdev_add(lookup); + clkdev_create(clk, "cpufreq_ck", NULL); return; cleanup: kfree(hw); - kfree(lookup); } #endif diff --git a/arch/arm/mach-omap2/control.c b/arch/arm/mach-omap2/control.c index af95a624f..f00893027 100644 --- a/arch/arm/mach-omap2/control.c +++ b/arch/arm/mach-omap2/control.c @@ -112,6 +112,7 @@ struct omap3_control_regs { u32 csirxfe; u32 iva2_bootaddr; u32 iva2_bootmod; + u32 wkup_ctrl; u32 debobs_0; u32 debobs_1; u32 debobs_2; @@ -455,6 +456,7 @@ void omap3_control_save_context(void) omap_ctrl_readl(OMAP343X_CONTROL_IVA2_BOOTADDR); control_context.iva2_bootmod = omap_ctrl_readl(OMAP343X_CONTROL_IVA2_BOOTMOD); + control_context.wkup_ctrl = omap_ctrl_readl(OMAP34XX_CONTROL_WKUP_CTRL); control_context.debobs_0 = omap_ctrl_readl(OMAP343X_CONTROL_DEBOBS(0)); control_context.debobs_1 = omap_ctrl_readl(OMAP343X_CONTROL_DEBOBS(1)); control_context.debobs_2 = omap_ctrl_readl(OMAP343X_CONTROL_DEBOBS(2)); @@ -512,6 +514,7 @@ void omap3_control_restore_context(void) OMAP343X_CONTROL_IVA2_BOOTADDR); omap_ctrl_writel(control_context.iva2_bootmod, OMAP343X_CONTROL_IVA2_BOOTMOD); + omap_ctrl_writel(control_context.wkup_ctrl, OMAP34XX_CONTROL_WKUP_CTRL); omap_ctrl_writel(control_context.debobs_0, OMAP343X_CONTROL_DEBOBS(0)); omap_ctrl_writel(control_context.debobs_1, OMAP343X_CONTROL_DEBOBS(1)); omap_ctrl_writel(control_context.debobs_2, OMAP343X_CONTROL_DEBOBS(2)); diff --git a/arch/arm/mach-omap2/control.h b/arch/arm/mach-omap2/control.h index 80d2b7d8e..ec406bc2c 100644 --- a/arch/arm/mach-omap2/control.h +++ b/arch/arm/mach-omap2/control.h @@ -231,6 +231,9 @@ #define OMAP343X_PADCONF_ETK_D15 OMAP343X_PADCONF_ETK(17) /* 34xx GENERAL_WKUP register offsets */ +#define OMAP34XX_CONTROL_WKUP_CTRL (OMAP343X_CONTROL_GENERAL_WKUP - 0x4) +#define OMAP36XX_GPIO_IO_PWRDNZ BIT(6) + #define OMAP343X_CONTROL_WKUP_DEBOBSMUX(i) (OMAP343X_CONTROL_GENERAL_WKUP + \ 0x008 + (i)) #define OMAP343X_CONTROL_WKUP_DEBOBS0 (OMAP343X_CONTROL_GENERAL_WKUP + 0x008) diff --git a/arch/arm/mach-omap2/devices.c b/arch/arm/mach-omap2/devices.c index 990338fba..a69bd67e9 100644 --- a/arch/arm/mach-omap2/devices.c +++ b/arch/arm/mach-omap2/devices.c @@ -63,7 +63,7 @@ static int __init omap3_l3_init(void) WARN(IS_ERR(pdev), "could not build omap_device for %s\n", oh_name); - return PTR_RET(pdev); + return PTR_ERR_OR_ZERO(pdev); } omap_postcore_initcall(omap3_l3_init); @@ -333,6 +333,6 @@ static int __init omap_gpmc_init(void) pdev = omap_device_build("omap-gpmc", -1, oh, NULL, 0); WARN(IS_ERR(pdev), "could not build omap_device for %s\n", oh_name); - return PTR_RET(pdev); + return PTR_ERR_OR_ZERO(pdev); } omap_postcore_initcall(omap_gpmc_init); diff --git a/arch/arm/mach-omap2/display.c b/arch/arm/mach-omap2/display.c index f492ae147..6ab13d18c 100644 --- a/arch/arm/mach-omap2/display.c +++ b/arch/arm/mach-omap2/display.c @@ -287,6 +287,8 @@ static enum omapdss_version __init omap_display_get_version(void) return OMAPDSS_VER_OMAP5; else if (soc_is_am43xx()) return OMAPDSS_VER_AM43xx; + else if (soc_is_dra7xx()) + return OMAPDSS_VER_DRA7xx; else return OMAPDSS_VER_UNKNOWN; } @@ -568,25 +570,25 @@ void __init omapdss_early_init_of(void) } +static const char * const omapdss_compat_names[] __initconst = { + "ti,omap2-dss", + "ti,omap3-dss", + "ti,omap4-dss", + "ti,omap5-dss", + "ti,dra7-dss", +}; + struct device_node * __init omapdss_find_dss_of_node(void) { struct device_node *node; + int i; - node = of_find_compatible_node(NULL, NULL, "ti,omap2-dss"); - if (node) - return node; - - node = of_find_compatible_node(NULL, NULL, "ti,omap3-dss"); - if (node) - return node; - - node = of_find_compatible_node(NULL, NULL, "ti,omap4-dss"); - if (node) - return node; - - node = of_find_compatible_node(NULL, NULL, "ti,omap5-dss"); - if (node) - return node; + for (i = 0; i < ARRAY_SIZE(omapdss_compat_names); ++i) { + node = of_find_compatible_node(NULL, NULL, + omapdss_compat_names[i]); + if (node) + return node; + } return NULL; } diff --git a/arch/arm/mach-omap2/dma.c b/arch/arm/mach-omap2/dma.c index e1a56d875..1ed4be184 100644 --- a/arch/arm/mach-omap2/dma.c +++ b/arch/arm/mach-omap2/dma.c @@ -117,7 +117,6 @@ static void omap2_show_dma_caps(void) u8 revision = dma_read(REVISION, 0) & 0xff; printk(KERN_INFO "OMAP DMA hardware revision %d.%d\n", revision >> 4, revision & 0xf); - return; } static unsigned configure_dma_errata(void) diff --git a/arch/arm/mach-omap2/fb.c b/arch/arm/mach-omap2/fb.c index 26e28e94f..1f1ecf880 100644 --- a/arch/arm/mach-omap2/fb.c +++ b/arch/arm/mach-omap2/fb.c @@ -84,7 +84,7 @@ int __init omap_init_vrfb(void) pdev = platform_device_register_resndata(NULL, "omapvrfb", -1, res, num_res, NULL, 0); - return PTR_RET(pdev); + return PTR_ERR_OR_ZERO(pdev); } #else int __init omap_init_vrfb(void) { return 0; } diff --git a/arch/arm/mach-omap2/gpmc-onenand.c b/arch/arm/mach-omap2/gpmc-onenand.c index f899e77ff..17a6f752a 100644 --- a/arch/arm/mach-omap2/gpmc-onenand.c +++ b/arch/arm/mach-omap2/gpmc-onenand.c @@ -216,11 +216,11 @@ static void omap2_onenand_calc_sync_timings(struct gpmc_timings *t, div = gpmc_calc_divider(min_gpmc_clk_period); gpmc_clk_ns = gpmc_ticks_to_ns(div); - if (gpmc_clk_ns < 15) /* >66Mhz */ + if (gpmc_clk_ns < 15) /* >66MHz */ onenand_flags |= ONENAND_FLAG_HF; else onenand_flags &= ~ONENAND_FLAG_HF; - if (gpmc_clk_ns < 12) /* >83Mhz */ + if (gpmc_clk_ns < 12) /* >83MHz */ onenand_flags |= ONENAND_FLAG_VHF; else onenand_flags &= ~ONENAND_FLAG_VHF; diff --git a/arch/arm/mach-omap2/hsmmc.c b/arch/arm/mach-omap2/hsmmc.c index 9a8611ab5..cff079e56 100644 --- a/arch/arm/mach-omap2/hsmmc.c +++ b/arch/arm/mach-omap2/hsmmc.c @@ -70,7 +70,7 @@ static void omap_hsmmc1_before_set_reg(struct device *dev, reg = omap_ctrl_readl(control_pbias_offset); if (cpu_is_omap3630()) { - /* Set MMC I/O to 52Mhz */ + /* Set MMC I/O to 52MHz */ prog_io = omap_ctrl_readl(OMAP343X_CONTROL_PROG_IO1); prog_io |= OMAP3630_PRG_SDMMC1_SPEEDCTRL; omap_ctrl_writel(prog_io, OMAP343X_CONTROL_PROG_IO1); diff --git a/arch/arm/mach-omap2/hwspinlock.c b/arch/arm/mach-omap2/hwspinlock.c deleted file mode 100644 index ef175acae..000000000 --- a/arch/arm/mach-omap2/hwspinlock.c +++ /dev/null @@ -1,60 +0,0 @@ -/* - * OMAP hardware spinlock device initialization - * - * Copyright (C) 2010 Texas Instruments Incorporated - http://www.ti.com - * - * Contact: Simon Que <sque@ti.com> - * Hari Kanigeri <h-kanigeri2@ti.com> - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * version 2 as published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - */ - -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/err.h> -#include <linux/hwspinlock.h> - -#include "soc.h" -#include "omap_hwmod.h" -#include "omap_device.h" - -static struct hwspinlock_pdata omap_hwspinlock_pdata __initdata = { - .base_id = 0, -}; - -static int __init hwspinlocks_init(void) -{ - int retval = 0; - struct omap_hwmod *oh; - struct platform_device *pdev; - const char *oh_name = "spinlock"; - const char *dev_name = "omap_hwspinlock"; - - /* - * Hwmod lookup will fail in case our platform doesn't support the - * hardware spinlock module, so it is safe to run this initcall - * on all omaps - */ - oh = omap_hwmod_lookup(oh_name); - if (oh == NULL) - return -EINVAL; - - pdev = omap_device_build(dev_name, 0, oh, &omap_hwspinlock_pdata, - sizeof(struct hwspinlock_pdata)); - if (IS_ERR(pdev)) { - pr_err("Can't build omap_device for %s:%s\n", dev_name, - oh_name); - retval = PTR_ERR(pdev); - } - - return retval; -} -/* early board code might need to reserve specific hwspinlock instances */ -omap_postcore_initcall(hwspinlocks_init); diff --git a/arch/arm/mach-omap2/omap-wakeupgen.c b/arch/arm/mach-omap2/omap-wakeupgen.c index 3b56722df..e1d2e991d 100644 --- a/arch/arm/mach-omap2/omap-wakeupgen.c +++ b/arch/arm/mach-omap2/omap-wakeupgen.c @@ -392,6 +392,7 @@ static struct irq_chip wakeupgen_chip = { .irq_mask = wakeupgen_mask, .irq_unmask = wakeupgen_unmask, .irq_retrigger = irq_chip_retrigger_hierarchy, + .irq_set_type = irq_chip_set_type_parent, .flags = IRQCHIP_SKIP_SET_WAKE | IRQCHIP_MASK_ON_SUSPEND, #ifdef CONFIG_SMP .irq_set_affinity = irq_chip_set_affinity_parent, @@ -444,7 +445,7 @@ static int wakeupgen_domain_alloc(struct irq_domain *domain, return irq_domain_alloc_irqs_parent(domain, virq, nr_irqs, &parent_args); } -static struct irq_domain_ops wakeupgen_domain_ops = { +static const struct irq_domain_ops wakeupgen_domain_ops = { .xlate = wakeupgen_domain_xlate, .alloc = wakeupgen_domain_alloc, .free = irq_domain_free_irqs_common, diff --git a/arch/arm/mach-omap2/omap_device.c b/arch/arm/mach-omap2/omap_device.c index 166b18f51..4cb8fd9f7 100644 --- a/arch/arm/mach-omap2/omap_device.c +++ b/arch/arm/mach-omap2/omap_device.c @@ -47,7 +47,7 @@ static void _add_clkdev(struct omap_device *od, const char *clk_alias, const char *clk_name) { struct clk *r; - struct clk_lookup *l; + int rc; if (!clk_alias || !clk_name) return; @@ -62,21 +62,15 @@ static void _add_clkdev(struct omap_device *od, const char *clk_alias, return; } - r = clk_get(NULL, clk_name); - if (IS_ERR(r)) { - dev_err(&od->pdev->dev, - "clk_get for %s failed\n", clk_name); - return; - } - - l = clkdev_alloc(r, clk_alias, dev_name(&od->pdev->dev)); - if (!l) { - dev_err(&od->pdev->dev, - "clkdev_alloc for %s failed\n", clk_alias); - return; + rc = clk_add_alias(clk_alias, dev_name(&od->pdev->dev), clk_name, NULL); + if (rc) { + if (rc == -ENODEV || rc == -ENOMEM) + dev_err(&od->pdev->dev, + "clkdev_alloc for %s failed\n", clk_alias); + else + dev_err(&od->pdev->dev, + "clk_get for %s failed\n", clk_name); } - - clkdev_add(l); } /** @@ -224,13 +218,13 @@ static int _omap_device_notifier_call(struct notifier_block *nb, */ static int _omap_device_enable_hwmods(struct omap_device *od) { + int ret = 0; int i; for (i = 0; i < od->hwmods_cnt; i++) - omap_hwmod_enable(od->hwmods[i]); + ret |= omap_hwmod_enable(od->hwmods[i]); - /* XXX pass along return value here? */ - return 0; + return ret; } /** @@ -241,13 +235,13 @@ static int _omap_device_enable_hwmods(struct omap_device *od) */ static int _omap_device_idle_hwmods(struct omap_device *od) { + int ret = 0; int i; for (i = 0; i < od->hwmods_cnt; i++) - omap_hwmod_idle(od->hwmods[i]); + ret |= omap_hwmod_idle(od->hwmods[i]); - /* XXX pass along return value here? */ - return 0; + return ret; } /* Public functions for use by core code */ @@ -595,18 +589,20 @@ static int _od_runtime_suspend(struct device *dev) int ret; ret = pm_generic_runtime_suspend(dev); + if (ret) + return ret; - if (!ret) - omap_device_idle(pdev); - - return ret; + return omap_device_idle(pdev); } static int _od_runtime_resume(struct device *dev) { struct platform_device *pdev = to_platform_device(dev); + int ret; - omap_device_enable(pdev); + ret = omap_device_enable(pdev); + if (ret) + return ret; return pm_generic_runtime_resume(dev); } @@ -688,11 +684,8 @@ struct dev_pm_domain omap_device_pm_domain = { SET_RUNTIME_PM_OPS(_od_runtime_suspend, _od_runtime_resume, NULL) USE_PLATFORM_PM_SLEEP_OPS - .suspend_noirq = _od_suspend_noirq, - .resume_noirq = _od_resume_noirq, - .freeze_noirq = _od_suspend_noirq, - .thaw_noirq = _od_resume_noirq, - .restore_noirq = _od_resume_noirq, + SET_NOIRQ_SYSTEM_SLEEP_PM_OPS(_od_suspend_noirq, + _od_resume_noirq) } }; @@ -743,7 +736,8 @@ int omap_device_enable(struct platform_device *pdev) ret = _omap_device_enable_hwmods(od); - od->_state = OMAP_DEVICE_STATE_ENABLED; + if (ret == 0) + od->_state = OMAP_DEVICE_STATE_ENABLED; return ret; } @@ -773,7 +767,8 @@ int omap_device_idle(struct platform_device *pdev) ret = _omap_device_idle_hwmods(od); - od->_state = OMAP_DEVICE_STATE_IDLE; + if (ret == 0) + od->_state = OMAP_DEVICE_STATE_IDLE; return ret; } diff --git a/arch/arm/mach-omap2/omap_hwmod.c b/arch/arm/mach-omap2/omap_hwmod.c index 5286e7773..486cc4ded 100644 --- a/arch/arm/mach-omap2/omap_hwmod.c +++ b/arch/arm/mach-omap2/omap_hwmod.c @@ -3326,16 +3326,17 @@ int omap_hwmod_enable(struct omap_hwmod *oh) */ int omap_hwmod_idle(struct omap_hwmod *oh) { + int r; unsigned long flags; if (!oh) return -EINVAL; spin_lock_irqsave(&oh->_lock, flags); - _idle(oh); + r = _idle(oh); spin_unlock_irqrestore(&oh->_lock, flags); - return 0; + return r; } /** @@ -3348,16 +3349,17 @@ int omap_hwmod_idle(struct omap_hwmod *oh) */ int omap_hwmod_shutdown(struct omap_hwmod *oh) { + int r; unsigned long flags; if (!oh) return -EINVAL; spin_lock_irqsave(&oh->_lock, flags); - _shutdown(oh); + r = _shutdown(oh); spin_unlock_irqrestore(&oh->_lock, flags); - return 0; + return r; } /* diff --git a/arch/arm/mach-omap2/omap_hwmod.h b/arch/arm/mach-omap2/omap_hwmod.h index 9611c91d9..b5d27ec81 100644 --- a/arch/arm/mach-omap2/omap_hwmod.h +++ b/arch/arm/mach-omap2/omap_hwmod.h @@ -109,6 +109,12 @@ extern struct omap_hwmod_sysc_fields omap_hwmod_sysc_type3; #define DEBUG_OMAPUART_FLAGS (HWMOD_INIT_NO_IDLE | HWMOD_INIT_NO_RESET) +#ifdef CONFIG_OMAP_GPMC_DEBUG +#define DEBUG_OMAP_GPMC_HWMOD_FLAGS HWMOD_INIT_NO_RESET +#else +#define DEBUG_OMAP_GPMC_HWMOD_FLAGS 0 +#endif + #if defined(CONFIG_DEBUG_OMAP2UART1) #undef DEBUG_OMAP2UART1_FLAGS #define DEBUG_OMAP2UART1_FLAGS DEBUG_OMAPUART_FLAGS diff --git a/arch/arm/mach-omap2/omap_hwmod_2xxx_ipblock_data.c b/arch/arm/mach-omap2/omap_hwmod_2xxx_ipblock_data.c index 8821b9d6b..6dcfd03ce 100644 --- a/arch/arm/mach-omap2/omap_hwmod_2xxx_ipblock_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_2xxx_ipblock_data.c @@ -762,16 +762,8 @@ struct omap_hwmod omap2xxx_gpmc_hwmod = { .name = "gpmc", .class = &omap2xxx_gpmc_hwmod_class, .main_clk = "gpmc_fck", - /* - * XXX HWMOD_INIT_NO_RESET should not be needed for this IP - * block. It is not being added due to any known bugs with - * resetting the GPMC IP block, but rather because any timings - * set by the bootloader are not being correctly programmed by - * the kernel from the board file or DT data. - * HWMOD_INIT_NO_RESET should be removed ASAP. - */ - .flags = (HWMOD_INIT_NO_IDLE | HWMOD_INIT_NO_RESET | - HWMOD_NO_IDLEST), + /* Skip reset for CONFIG_OMAP_GPMC_DEBUG for bootloader timings */ + .flags = HWMOD_NO_IDLEST | DEBUG_OMAP_GPMC_HWMOD_FLAGS, .prcm = { .omap2 = { .prcm_reg_id = 3, diff --git a/arch/arm/mach-omap2/omap_hwmod_33xx_43xx_common_data.h b/arch/arm/mach-omap2/omap_hwmod_33xx_43xx_common_data.h index 130332c05..7f737965f 100644 --- a/arch/arm/mach-omap2/omap_hwmod_33xx_43xx_common_data.h +++ b/arch/arm/mach-omap2/omap_hwmod_33xx_43xx_common_data.h @@ -145,6 +145,7 @@ extern struct omap_hwmod am33xx_uart5_hwmod; extern struct omap_hwmod am33xx_uart6_hwmod; extern struct omap_hwmod am33xx_wd_timer1_hwmod; +extern struct omap_hwmod_class am33xx_emif_hwmod_class; extern struct omap_hwmod_class am33xx_l4_hwmod_class; extern struct omap_hwmod_class am33xx_wkup_m3_hwmod_class; extern struct omap_hwmod_class am33xx_control_hwmod_class; diff --git a/arch/arm/mach-omap2/omap_hwmod_33xx_43xx_ipblock_data.c b/arch/arm/mach-omap2/omap_hwmod_33xx_43xx_ipblock_data.c index cabc5695b..907a452b7 100644 --- a/arch/arm/mach-omap2/omap_hwmod_33xx_43xx_ipblock_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_33xx_43xx_ipblock_data.c @@ -203,6 +203,19 @@ struct omap_hwmod am33xx_prcm_hwmod = { }; /* + * 'emif' class + * instance(s): emif + */ +static struct omap_hwmod_class_sysconfig am33xx_emif_sysc = { + .rev_offs = 0x0000, +}; + +struct omap_hwmod_class am33xx_emif_hwmod_class = { + .name = "emif", + .sysc = &am33xx_emif_sysc, +}; + +/* * 'aes0' class */ static struct omap_hwmod_class_sysconfig am33xx_aes0_sysc = { @@ -668,7 +681,8 @@ struct omap_hwmod am33xx_gpmc_hwmod = { .name = "gpmc", .class = &am33xx_gpmc_hwmod_class, .clkdm_name = "l3s_clkdm", - .flags = (HWMOD_INIT_NO_IDLE | HWMOD_INIT_NO_RESET), + /* Skip reset for CONFIG_OMAP_GPMC_DEBUG for bootloader timings */ + .flags = DEBUG_OMAP_GPMC_HWMOD_FLAGS, .main_clk = "l3s_gclk", .prcm = { .omap4 = { diff --git a/arch/arm/mach-omap2/omap_hwmod_33xx_data.c b/arch/arm/mach-omap2/omap_hwmod_33xx_data.c index 0cf7b563d..cc0791d91 100644 --- a/arch/arm/mach-omap2/omap_hwmod_33xx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_33xx_data.c @@ -34,19 +34,6 @@ * IP blocks */ -/* - * 'emif' class - * instance(s): emif - */ -static struct omap_hwmod_class_sysconfig am33xx_emif_sysc = { - .rev_offs = 0x0000, -}; - -static struct omap_hwmod_class am33xx_emif_hwmod_class = { - .name = "emif", - .sysc = &am33xx_emif_sysc, -}; - /* emif */ static struct omap_hwmod am33xx_emif_hwmod = { .name = "emif", diff --git a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c index 4e8e93c39..dc55f8ded 100644 --- a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c @@ -2169,16 +2169,8 @@ static struct omap_hwmod omap3xxx_gpmc_hwmod = { .clkdm_name = "core_l3_clkdm", .mpu_irqs = omap3xxx_gpmc_irqs, .main_clk = "gpmc_fck", - /* - * XXX HWMOD_INIT_NO_RESET should not be needed for this IP - * block. It is not being added due to any known bugs with - * resetting the GPMC IP block, but rather because any timings - * set by the bootloader are not being correctly programmed by - * the kernel from the board file or DT data. - * HWMOD_INIT_NO_RESET should be removed ASAP. - */ - .flags = (HWMOD_INIT_NO_IDLE | HWMOD_INIT_NO_RESET | - HWMOD_NO_IDLEST), + /* Skip reset for CONFIG_OMAP_GPMC_DEBUG for bootloader timings */ + .flags = HWMOD_NO_IDLEST | DEBUG_OMAP_GPMC_HWMOD_FLAGS, }; /* @@ -3744,29 +3736,54 @@ static struct omap_hwmod_ocp_if *omap3xxx_hwmod_ocp_ifs[] __initdata = { /* GP-only hwmod links */ static struct omap_hwmod_ocp_if *omap34xx_gp_hwmod_ocp_ifs[] __initdata = { &omap3xxx_l4_sec__timer12, - &omap3xxx_l4_core__sham, - &omap3xxx_l4_core__aes, NULL }; static struct omap_hwmod_ocp_if *omap36xx_gp_hwmod_ocp_ifs[] __initdata = { &omap3xxx_l4_sec__timer12, - &omap3xxx_l4_core__sham, - &omap3xxx_l4_core__aes, NULL }; static struct omap_hwmod_ocp_if *am35xx_gp_hwmod_ocp_ifs[] __initdata = { &omap3xxx_l4_sec__timer12, - /* - * Apparently the SHA/MD5 and AES accelerator IP blocks are - * only present on some AM35xx chips, and no one knows which - * ones. See - * http://www.spinics.net/lists/arm-kernel/msg215466.html So - * if you need these IP blocks on an AM35xx, try uncommenting - * the following lines. - */ + NULL +}; + +/* crypto hwmod links */ +static struct omap_hwmod_ocp_if *omap34xx_sham_hwmod_ocp_ifs[] __initdata = { + &omap3xxx_l4_core__sham, + NULL +}; + +static struct omap_hwmod_ocp_if *omap34xx_aes_hwmod_ocp_ifs[] __initdata = { + &omap3xxx_l4_core__aes, + NULL +}; + +static struct omap_hwmod_ocp_if *omap36xx_sham_hwmod_ocp_ifs[] __initdata = { + &omap3xxx_l4_core__sham, + NULL +}; + +static struct omap_hwmod_ocp_if *omap36xx_aes_hwmod_ocp_ifs[] __initdata = { + &omap3xxx_l4_core__aes, + NULL +}; + +/* + * Apparently the SHA/MD5 and AES accelerator IP blocks are + * only present on some AM35xx chips, and no one knows which + * ones. See + * http://www.spinics.net/lists/arm-kernel/msg215466.html So + * if you need these IP blocks on an AM35xx, try uncommenting + * the following lines. + */ +static struct omap_hwmod_ocp_if *am35xx_sham_hwmod_ocp_ifs[] __initdata = { /* &omap3xxx_l4_core__sham, */ + NULL +}; + +static struct omap_hwmod_ocp_if *am35xx_aes_hwmod_ocp_ifs[] __initdata = { /* &omap3xxx_l4_core__aes, */ NULL }; @@ -3868,10 +3885,41 @@ static struct omap_hwmod_ocp_if *omap3xxx_dss_hwmod_ocp_ifs[] __initdata = { NULL }; +/** + * omap3xxx_hwmod_is_hs_ip_block_usable - is a security IP block accessible? + * @bus: struct device_node * for the top-level OMAP DT data + * @dev_name: device name used in the DT file + * + * Determine whether a "secure" IP block @dev_name is usable by Linux. + * There doesn't appear to be a 100% reliable way to determine this, + * so we rely on heuristics. If @bus is null, meaning there's no DT + * data, then we only assume the IP block is accessible if the OMAP is + * fused as a 'general-purpose' SoC. If however DT data is present, + * test to see if the IP block is described in the DT data and set to + * 'status = "okay"'. If so then we assume the ODM has configured the + * OMAP firewalls to allow access to the IP block. + * + * Return: 0 if device named @dev_name is not likely to be accessible, + * or 1 if it is likely to be accessible. + */ +static int __init omap3xxx_hwmod_is_hs_ip_block_usable(struct device_node *bus, + const char *dev_name) +{ + if (!bus) + return (omap_type() == OMAP2_DEVICE_TYPE_GP) ? 1 : 0; + + if (of_device_is_available(of_find_node_by_name(bus, dev_name))) + return 1; + + return 0; +} + int __init omap3xxx_hwmod_init(void) { int r; - struct omap_hwmod_ocp_if **h = NULL, **h_gp = NULL; + struct omap_hwmod_ocp_if **h = NULL, **h_gp = NULL, **h_sham = NULL; + struct omap_hwmod_ocp_if **h_aes = NULL; + struct device_node *bus = NULL; unsigned int rev; omap_hwmod_init(); @@ -3893,13 +3941,19 @@ int __init omap3xxx_hwmod_init(void) rev == OMAP3430_REV_ES3_1 || rev == OMAP3430_REV_ES3_1_2) { h = omap34xx_hwmod_ocp_ifs; h_gp = omap34xx_gp_hwmod_ocp_ifs; + h_sham = omap34xx_sham_hwmod_ocp_ifs; + h_aes = omap34xx_aes_hwmod_ocp_ifs; } else if (rev == AM35XX_REV_ES1_0 || rev == AM35XX_REV_ES1_1) { h = am35xx_hwmod_ocp_ifs; h_gp = am35xx_gp_hwmod_ocp_ifs; + h_sham = am35xx_sham_hwmod_ocp_ifs; + h_aes = am35xx_aes_hwmod_ocp_ifs; } else if (rev == OMAP3630_REV_ES1_0 || rev == OMAP3630_REV_ES1_1 || rev == OMAP3630_REV_ES1_2) { h = omap36xx_hwmod_ocp_ifs; h_gp = omap36xx_gp_hwmod_ocp_ifs; + h_sham = omap36xx_sham_hwmod_ocp_ifs; + h_aes = omap36xx_aes_hwmod_ocp_ifs; } else { WARN(1, "OMAP3 hwmod family init: unknown chip type\n"); return -EINVAL; @@ -3916,6 +3970,25 @@ int __init omap3xxx_hwmod_init(void) return r; } + /* + * Register crypto hwmod links only if they are not disabled in DT. + * If DT information is missing, enable them only for GP devices. + */ + + if (of_have_populated_dt()) + bus = of_find_node_by_name(NULL, "ocp"); + + if (h_sham && omap3xxx_hwmod_is_hs_ip_block_usable(bus, "sham")) { + r = omap_hwmod_register_links(h_sham); + if (r < 0) + return r; + } + + if (h_aes && omap3xxx_hwmod_is_hs_ip_block_usable(bus, "aes")) { + r = omap_hwmod_register_links(h_aes); + if (r < 0) + return r; + } /* * Register hwmod links specific to certain ES levels of a diff --git a/arch/arm/mach-omap2/omap_hwmod_43xx_data.c b/arch/arm/mach-omap2/omap_hwmod_43xx_data.c index 17e8004fc..215d5efa0 100644 --- a/arch/arm/mach-omap2/omap_hwmod_43xx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_43xx_data.c @@ -24,6 +24,20 @@ /* IP blocks */ +static struct omap_hwmod am43xx_emif_hwmod = { + .name = "emif", + .class = &am33xx_emif_hwmod_class, + .clkdm_name = "emif_clkdm", + .flags = HWMOD_INIT_NO_IDLE, + .main_clk = "dpll_ddr_m2_ck", + .prcm = { + .omap4 = { + .clkctrl_offs = AM43XX_CM_PER_EMIF_CLKCTRL_OFFSET, + .modulemode = MODULEMODE_SWCTRL, + }, + }, +}; + static struct omap_hwmod am43xx_l4_hs_hwmod = { .name = "l4_hs", .class = &am33xx_l4_hwmod_class, @@ -583,6 +597,13 @@ static struct omap_hwmod am43xx_vpfe1_hwmod = { }; /* Interfaces */ +static struct omap_hwmod_ocp_if am43xx_l3_main__emif = { + .master = &am33xx_l3_main_hwmod, + .slave = &am43xx_emif_hwmod, + .clk = "dpll_core_m4_ck", + .user = OCP_USER_MPU | OCP_USER_SDMA, +}; + static struct omap_hwmod_ocp_if am43xx_l3_main__l4_hs = { .master = &am33xx_l3_main_hwmod, .slave = &am43xx_l4_hs_hwmod, @@ -918,6 +939,7 @@ static struct omap_hwmod_ocp_if *am43xx_hwmod_ocp_ifs[] __initdata = { &am33xx_l3_main__l3_instr, &am33xx_l3_main__gfx, &am33xx_l3_s__l3_main, + &am43xx_l3_main__emif, &am33xx_pruss__l3_main, &am43xx_wkup_m3__l4_wkup, &am33xx_gfx__l3_main, diff --git a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c index f5e68a782..43eebf2c5 100644 --- a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c @@ -1188,15 +1188,8 @@ static struct omap_hwmod omap44xx_gpmc_hwmod = { .name = "gpmc", .class = &omap44xx_gpmc_hwmod_class, .clkdm_name = "l3_2_clkdm", - /* - * XXX HWMOD_INIT_NO_RESET should not be needed for this IP - * block. It is not being added due to any known bugs with - * resetting the GPMC IP block, but rather because any timings - * set by the bootloader are not being correctly programmed by - * the kernel from the board file or DT data. - * HWMOD_INIT_NO_RESET should be removed ASAP. - */ - .flags = HWMOD_INIT_NO_IDLE | HWMOD_INIT_NO_RESET, + /* Skip reset for CONFIG_OMAP_GPMC_DEBUG for bootloader timings */ + .flags = DEBUG_OMAP_GPMC_HWMOD_FLAGS, .prcm = { .omap4 = { .clkctrl_offs = OMAP4_CM_L3_2_GPMC_CLKCTRL_OFFSET, diff --git a/arch/arm/mach-omap2/omap_hwmod_7xx_data.c b/arch/arm/mach-omap2/omap_hwmod_7xx_data.c index 0e64c2fac..562247bce 100644 --- a/arch/arm/mach-omap2/omap_hwmod_7xx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_7xx_data.c @@ -49,6 +49,27 @@ */ /* + * 'dmm' class + * instance(s): dmm + */ +static struct omap_hwmod_class dra7xx_dmm_hwmod_class = { + .name = "dmm", +}; + +/* dmm */ +static struct omap_hwmod dra7xx_dmm_hwmod = { + .name = "dmm", + .class = &dra7xx_dmm_hwmod_class, + .clkdm_name = "emif_clkdm", + .prcm = { + .omap4 = { + .clkctrl_offs = DRA7XX_CM_EMIF_DMM_CLKCTRL_OFFSET, + .context_offs = DRA7XX_RM_EMIF_DMM_CONTEXT_OFFSET, + }, + }, +}; + +/* * 'l3' class * instance(s): l3_instr, l3_main_1, l3_main_2 */ @@ -438,6 +459,7 @@ static struct omap_hwmod_opt_clk dss_opt_clks[] = { { .role = "video2_clk", .clk = "dss_video2_clk" }, { .role = "video1_clk", .clk = "dss_video1_clk" }, { .role = "hdmi_clk", .clk = "dss_hdmi_clk" }, + { .role = "hdcp_clk", .clk = "dss_deshdcp_clk" }, }; static struct omap_hwmod dra7xx_dss_hwmod = { @@ -500,6 +522,7 @@ static struct omap_hwmod dra7xx_dss_dispc_hwmod = { }, }, .dev_attr = &dss_dispc_dev_attr, + .parent_hwmod = &dra7xx_dss_hwmod, }; /* @@ -541,6 +564,7 @@ static struct omap_hwmod dra7xx_dss_hdmi_hwmod = { }, .opt_clks = dss_hdmi_opt_clks, .opt_clks_cnt = ARRAY_SIZE(dss_hdmi_opt_clks), + .parent_hwmod = &dra7xx_dss_hwmod, }; /* @@ -803,8 +827,7 @@ static struct omap_hwmod_class_sysconfig dra7xx_gpmc_sysc = { .syss_offs = 0x0014, .sysc_flags = (SYSC_HAS_AUTOIDLE | SYSC_HAS_SIDLEMODE | SYSC_HAS_SOFTRESET | SYSS_HAS_RESET_STATUS), - .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART | - SIDLE_SMART_WKUP), + .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART), .sysc_fields = &omap_hwmod_sysc_type1, }; @@ -819,8 +842,8 @@ static struct omap_hwmod dra7xx_gpmc_hwmod = { .name = "gpmc", .class = &dra7xx_gpmc_hwmod_class, .clkdm_name = "l3main1_clkdm", - .flags = (HWMOD_INIT_NO_IDLE | HWMOD_INIT_NO_RESET | - HWMOD_SWSUP_SIDLE), + /* Skip reset for CONFIG_OMAP_GPMC_DEBUG for bootloader timings */ + .flags = DEBUG_OMAP_GPMC_HWMOD_FLAGS, .main_clk = "l3_iclk_div", .prcm = { .omap4 = { @@ -2321,6 +2344,14 @@ static struct omap_hwmod dra7xx_wd_timer2_hwmod = { * Interfaces */ +/* l3_main_1 -> dmm */ +static struct omap_hwmod_ocp_if dra7xx_l3_main_1__dmm = { + .master = &dra7xx_l3_main_1_hwmod, + .slave = &dra7xx_dmm_hwmod, + .clk = "l3_iclk_div", + .user = OCP_USER_SDMA, +}; + /* l3_main_2 -> l3_instr */ static struct omap_hwmod_ocp_if dra7xx_l3_main_2__l3_instr = { .master = &dra7xx_l3_main_2_hwmod, @@ -3289,6 +3320,7 @@ static struct omap_hwmod_ocp_if dra7xx_l4_wkup__wd_timer2 = { }; static struct omap_hwmod_ocp_if *dra7xx_hwmod_ocp_ifs[] __initdata = { + &dra7xx_l3_main_1__dmm, &dra7xx_l3_main_2__l3_instr, &dra7xx_l4_cfg__l3_main_1, &dra7xx_mpu__l3_main_1, diff --git a/arch/arm/mach-omap2/omap_hwmod_81xx_data.c b/arch/arm/mach-omap2/omap_hwmod_81xx_data.c index cab1eb61a..c92413769 100644 --- a/arch/arm/mach-omap2/omap_hwmod_81xx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_81xx_data.c @@ -478,6 +478,8 @@ static struct omap_hwmod dm81xx_gpmc_hwmod = { .clkdm_name = "alwon_l3s_clkdm", .class = &dm81xx_gpmc_hwmod_class, .main_clk = "sysclk6_ck", + /* Skip reset for CONFIG_OMAP_GPMC_DEBUG for bootloader timings */ + .flags = DEBUG_OMAP_GPMC_HWMOD_FLAGS, .prcm = { .omap4 = { .clkctrl_offs = DM816X_CM_ALWON_GPMC_CLKCTRL, diff --git a/arch/arm/mach-omap2/opp2430_data.c b/arch/arm/mach-omap2/opp2430_data.c index 0e75ec3e1..b2233b72b 100644 --- a/arch/arm/mach-omap2/opp2430_data.c +++ b/arch/arm/mach-omap2/opp2430_data.c @@ -116,7 +116,7 @@ const struct prcm_config omap2430_rate_table[] = { RATE_IN_243X}, /* PRCM-boot/bypass */ - {S13M, S13M, S13M, RB_CM_CLKSEL_MPU_VAL, /* 13Mhz */ + {S13M, S13M, S13M, RB_CM_CLKSEL_MPU_VAL, /* 13MHz */ RB_CM_CLKSEL_DSP_VAL, RB_CM_CLKSEL_GFX_VAL, RB_CM_CLKSEL1_CORE_VAL, MB_CM_CLKSEL1_PLL_13_VAL, MX_CLKSEL2_PLL_2x_VAL, RB_CM_CLKSEL_MDM_VAL, @@ -124,7 +124,7 @@ const struct prcm_config omap2430_rate_table[] = { RATE_IN_243X}, /* PRCM-boot/bypass */ - {S12M, S12M, S12M, RB_CM_CLKSEL_MPU_VAL, /* 12Mhz */ + {S12M, S12M, S12M, RB_CM_CLKSEL_MPU_VAL, /* 12MHz */ RB_CM_CLKSEL_DSP_VAL, RB_CM_CLKSEL_GFX_VAL, RB_CM_CLKSEL1_CORE_VAL, MB_CM_CLKSEL1_PLL_12_VAL, MX_CLKSEL2_PLL_2x_VAL, RB_CM_CLKSEL_MDM_VAL, diff --git a/arch/arm/mach-omap2/pdata-quirks.c b/arch/arm/mach-omap2/pdata-quirks.c index af11511dd..821171cf6 100644 --- a/arch/arm/mach-omap2/pdata-quirks.c +++ b/arch/arm/mach-omap2/pdata-quirks.c @@ -44,6 +44,27 @@ static void __init omap2420_n8x0_legacy_init(void) #endif #ifdef CONFIG_ARCH_OMAP3 +/* + * Configures GPIOs 126, 127 and 129 to 1.8V mode instead of 3.0V + * mode for MMC1 in case bootloader did not configure things. + * Note that if the pins are used for MMC1, pbias-regulator + * manages the IO voltage. + */ +static void __init omap3_gpio126_127_129(void) +{ + u32 reg; + + reg = omap_ctrl_readl(OMAP343X_CONTROL_PBIAS_LITE); + reg &= ~OMAP343X_PBIASLITEVMODE1; + reg |= OMAP343X_PBIASLITEPWRDNZ1; + omap_ctrl_writel(reg, OMAP343X_CONTROL_PBIAS_LITE); + if (cpu_is_omap3630()) { + reg = omap_ctrl_readl(OMAP34XX_CONTROL_WKUP_CTRL); + reg |= OMAP36XX_GPIO_IO_PWRDNZ; + omap_ctrl_writel(reg, OMAP34XX_CONTROL_WKUP_CTRL); + } +} + static void __init hsmmc2_internal_input_clk(void) { u32 reg; @@ -356,6 +377,7 @@ static struct pdata_init pdata_quirks[] __initdata = { { "nokia,omap3-n950", hsmmc2_internal_input_clk, }, { "isee,omap3-igep0020-rev-f", omap3_igep0020_rev_f_legacy_init, }, { "isee,omap3-igep0030-rev-g", omap3_igep0030_rev_g_legacy_init, }, + { "logicpd,dm3730-torpedo-devkit", omap3_gpio126_127_129, }, { "ti,omap3-evm-37xx", omap3_evm_legacy_init, }, { "ti,am3517-evm", am3517_evm_legacy_init, }, { "technexion,omap3-tao3530", omap3_tao3530_legacy_init, }, diff --git a/arch/arm/mach-omap2/pmu.c b/arch/arm/mach-omap2/pmu.c index a69e9a33c..d2adfebd3 100644 --- a/arch/arm/mach-omap2/pmu.c +++ b/arch/arm/mach-omap2/pmu.c @@ -55,7 +55,7 @@ static int __init omap2_init_pmu(unsigned oh_num, char *oh_names[]) WARN(IS_ERR(omap_pmu_dev), "Can't build omap_device for %s.\n", dev_name); - return PTR_RET(omap_pmu_dev); + return PTR_ERR_OR_ZERO(omap_pmu_dev); } static int __init omap_init_pmu(void) diff --git a/arch/arm/mach-omap2/prcm43xx.h b/arch/arm/mach-omap2/prcm43xx.h index d0261996d..7eebc27fa 100644 --- a/arch/arm/mach-omap2/prcm43xx.h +++ b/arch/arm/mach-omap2/prcm43xx.h @@ -146,4 +146,6 @@ #define AM43XX_CM_PER_HDQ1W_CLKCTRL_OFFSET 0x04a0 #define AM43XX_CM_PER_VPFE0_CLKCTRL_OFFSET 0x0068 #define AM43XX_CM_PER_VPFE1_CLKCTRL_OFFSET 0x0070 +#define AM43XX_CM_PER_EMIF_CLKCTRL_OFFSET 0x0720 + #endif diff --git a/arch/arm/mach-omap2/sdrc2xxx.c b/arch/arm/mach-omap2/sdrc2xxx.c index ae3f15531..339b0ecb7 100644 --- a/arch/arm/mach-omap2/sdrc2xxx.c +++ b/arch/arm/mach-omap2/sdrc2xxx.c @@ -164,6 +164,6 @@ void omap2xxx_sdrc_init_params(u32 force_lock_to_unlock_mode) mem_timings.slow_dll_ctrl |= ((mem_timings.fast_dll_ctrl & 0xF) | (1 << 2)); - /* 90 degree phase for anything below 133Mhz + disable DLL filter */ + /* 90 degree phase for anything below 133MHz + disable DLL filter */ mem_timings.slow_dll_ctrl |= ((1 << 1) | (3 << 8)); } diff --git a/arch/arm/mach-omap2/serial.c b/arch/arm/mach-omap2/serial.c index 57dee0c7c..5fb50fe54 100644 --- a/arch/arm/mach-omap2/serial.c +++ b/arch/arm/mach-omap2/serial.c @@ -203,7 +203,7 @@ static int __init omap_serial_early_init(void) if (cmdline_find_option(uart_name)) { console_uart_id = uart->num; - if (console_loglevel >= 10) { + if (console_loglevel >= CONSOLE_LOGLEVEL_DEBUG) { uart_debug = true; pr_info("%s used as console in debug mode: uart%d clocks will not be gated", uart_name, uart->num); diff --git a/arch/arm/mach-omap2/sram242x.S b/arch/arm/mach-omap2/sram242x.S index 2c88ff2d0..53a2537cd 100644 --- a/arch/arm/mach-omap2/sram242x.S +++ b/arch/arm/mach-omap2/sram242x.S @@ -64,7 +64,7 @@ ENTRY(omap242x_sram_ddr_init) mvn r9, #0x4 @ mask to get clear bit2 and r10, r10, r9 @ clear bit2 for lock mode. orr r10, r10, #0x8 @ make sure DLL on (es2 bit pos) - orr r10, r10, #0x2 @ 90 degree phase for all below 133Mhz + orr r10, r10, #0x2 @ 90 degree phase for all below 133MHz str r10, [r11] @ commit to DLLA_CTRL bl i_dll_wait @ wait for dll to lock diff --git a/arch/arm/mach-omap2/sram243x.S b/arch/arm/mach-omap2/sram243x.S index d5deb9761..b3edd6f7f 100644 --- a/arch/arm/mach-omap2/sram243x.S +++ b/arch/arm/mach-omap2/sram243x.S @@ -64,7 +64,7 @@ ENTRY(omap243x_sram_ddr_init) mvn r9, #0x4 @ mask to get clear bit2 and r10, r10, r9 @ clear bit2 for lock mode. orr r10, r10, #0x8 @ make sure DLL on (es2 bit pos) - orr r10, r10, #0x2 @ 90 degree phase for all below 133Mhz + orr r10, r10, #0x2 @ 90 degree phase for all below 133MHz str r10, [r11] @ commit to DLLA_CTRL bl i_dll_wait @ wait for dll to lock diff --git a/arch/arm/mach-prima2/Kconfig b/arch/arm/mach-prima2/Kconfig index e03d8b5c9..9ab893240 100644 --- a/arch/arm/mach-prima2/Kconfig +++ b/arch/arm/mach-prima2/Kconfig @@ -4,6 +4,7 @@ menuconfig ARCH_SIRF select ARCH_REQUIRE_GPIOLIB select GENERIC_IRQ_CHIP select NO_IOPORT_MAP + select REGMAP select PINCTRL select PINCTRL_SIRF help diff --git a/arch/arm/mach-prima2/headsmp.S b/arch/arm/mach-prima2/headsmp.S index d86fe33c5..209d9fc5c 100644 --- a/arch/arm/mach-prima2/headsmp.S +++ b/arch/arm/mach-prima2/headsmp.S @@ -15,7 +15,6 @@ * ready for them to initialise. */ ENTRY(sirfsoc_secondary_startup) - bl v7_invalidate_l1 mrc p15, 0, r0, c0, c0, 5 and r0, r0, #15 adr r4, 1f diff --git a/arch/arm/mach-prima2/rtciobrg.c b/arch/arm/mach-prima2/rtciobrg.c index 8f66d8f7c..d4852d24d 100644 --- a/arch/arm/mach-prima2/rtciobrg.c +++ b/arch/arm/mach-prima2/rtciobrg.c @@ -1,5 +1,5 @@ /* - * RTC I/O Bridge interfaces for CSR SiRFprimaII + * RTC I/O Bridge interfaces for CSR SiRFprimaII/atlas7 * ARM access the registers of SYSRTC, GPSRTC and PWRC through this module * * Copyright (c) 2011 Cambridge Silicon Radio Limited, a CSR plc group company. @@ -10,6 +10,7 @@ #include <linux/kernel.h> #include <linux/module.h> #include <linux/io.h> +#include <linux/regmap.h> #include <linux/of.h> #include <linux/of_address.h> #include <linux/of_device.h> @@ -66,6 +67,7 @@ u32 sirfsoc_rtc_iobrg_readl(u32 addr) { unsigned long flags, val; + /* TODO: add hwspinlock to sync with M3 */ spin_lock_irqsave(&rtciobrg_lock, flags); val = __sirfsoc_rtc_iobrg_readl(addr); @@ -90,6 +92,7 @@ void sirfsoc_rtc_iobrg_writel(u32 val, u32 addr) { unsigned long flags; + /* TODO: add hwspinlock to sync with M3 */ spin_lock_irqsave(&rtciobrg_lock, flags); sirfsoc_rtc_iobrg_pre_writel(val, addr); @@ -102,6 +105,45 @@ void sirfsoc_rtc_iobrg_writel(u32 val, u32 addr) } EXPORT_SYMBOL_GPL(sirfsoc_rtc_iobrg_writel); + +static int regmap_iobg_regwrite(void *context, unsigned int reg, + unsigned int val) +{ + sirfsoc_rtc_iobrg_writel(val, reg); + return 0; +} + +static int regmap_iobg_regread(void *context, unsigned int reg, + unsigned int *val) +{ + *val = (u32)sirfsoc_rtc_iobrg_readl(reg); + return 0; +} + +static struct regmap_bus regmap_iobg = { + .reg_write = regmap_iobg_regwrite, + .reg_read = regmap_iobg_regread, +}; + +/** + * devm_regmap_init_iobg(): Initialise managed register map + * + * @iobg: Device that will be interacted with + * @config: Configuration for register map + * + * The return value will be an ERR_PTR() on error or a valid pointer + * to a struct regmap. The regmap will be automatically freed by the + * device management code. + */ +struct regmap *devm_regmap_init_iobg(struct device *dev, + const struct regmap_config *config) +{ + const struct regmap_bus *bus = ®map_iobg; + + return devm_regmap_init(dev, bus, dev, config); +} +EXPORT_SYMBOL_GPL(devm_regmap_init_iobg); + static const struct of_device_id rtciobrg_ids[] = { { .compatible = "sirf,prima2-rtciobg" }, {} @@ -132,7 +174,7 @@ static int __init sirfsoc_rtciobrg_init(void) } postcore_initcall(sirfsoc_rtciobrg_init); -MODULE_AUTHOR("Zhiwu Song <zhiwu.song@csr.com>, " - "Barry Song <baohua.song@csr.com>"); +MODULE_AUTHOR("Zhiwu Song <zhiwu.song@csr.com>"); +MODULE_AUTHOR("Barry Song <baohua.song@csr.com>"); MODULE_DESCRIPTION("CSR SiRFprimaII rtc io bridge"); MODULE_LICENSE("GPL v2"); diff --git a/arch/arm/mach-pxa/Makefile b/arch/arm/mach-pxa/Makefile index 4087d334e..2ceed407e 100644 --- a/arch/arm/mach-pxa/Makefile +++ b/arch/arm/mach-pxa/Makefile @@ -3,16 +3,15 @@ # # Common support (must be linked before board specific support) -obj-y += clock.o devices.o generic.o irq.o \ - reset.o +obj-y += devices.o generic.o irq.o reset.o obj-$(CONFIG_PM) += pm.o sleep.o standby.o # Generic drivers that other drivers may depend upon # SoC-specific code -obj-$(CONFIG_PXA25x) += mfp-pxa2xx.o clock-pxa2xx.o pxa2xx.o pxa25x.o -obj-$(CONFIG_PXA27x) += mfp-pxa2xx.o clock-pxa2xx.o pxa2xx.o pxa27x.o -obj-$(CONFIG_PXA3xx) += mfp-pxa3xx.o clock-pxa3xx.o pxa3xx.o smemc.o pxa3xx-ulpi.o +obj-$(CONFIG_PXA25x) += mfp-pxa2xx.o pxa2xx.o pxa25x.o +obj-$(CONFIG_PXA27x) += mfp-pxa2xx.o pxa2xx.o pxa27x.o +obj-$(CONFIG_PXA3xx) += mfp-pxa3xx.o pxa3xx.o smemc.o pxa3xx-ulpi.o obj-$(CONFIG_CPU_PXA300) += pxa300.o obj-$(CONFIG_CPU_PXA320) += pxa320.o obj-$(CONFIG_CPU_PXA930) += pxa930.o diff --git a/arch/arm/mach-pxa/clock-pxa2xx.c b/arch/arm/mach-pxa/clock-pxa2xx.c deleted file mode 100644 index 9ee2ad6a0..000000000 --- a/arch/arm/mach-pxa/clock-pxa2xx.c +++ /dev/null @@ -1,55 +0,0 @@ -/* - * linux/arch/arm/mach-pxa/clock-pxa2xx.c - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#include <linux/module.h> -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/io.h> -#include <linux/syscore_ops.h> - -#include <mach/pxa2xx-regs.h> - -#include "clock.h" - -void clk_pxa2xx_cken_enable(struct clk *clk) -{ - CKEN |= 1 << clk->cken; -} - -void clk_pxa2xx_cken_disable(struct clk *clk) -{ - CKEN &= ~(1 << clk->cken); -} - -const struct clkops clk_pxa2xx_cken_ops = { - .enable = clk_pxa2xx_cken_enable, - .disable = clk_pxa2xx_cken_disable, -}; - -#ifdef CONFIG_PM -static uint32_t saved_cken; - -static int pxa2xx_clock_suspend(void) -{ - saved_cken = CKEN; - return 0; -} - -static void pxa2xx_clock_resume(void) -{ - CKEN = saved_cken; -} -#else -#define pxa2xx_clock_suspend NULL -#define pxa2xx_clock_resume NULL -#endif - -struct syscore_ops pxa2xx_clock_syscore_ops = { - .suspend = pxa2xx_clock_suspend, - .resume = pxa2xx_clock_resume, -}; diff --git a/arch/arm/mach-pxa/clock-pxa3xx.c b/arch/arm/mach-pxa/clock-pxa3xx.c deleted file mode 100644 index d4e949983..000000000 --- a/arch/arm/mach-pxa/clock-pxa3xx.c +++ /dev/null @@ -1,212 +0,0 @@ -/* - * linux/arch/arm/mach-pxa/clock-pxa3xx.c - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#include <linux/module.h> -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/io.h> -#include <linux/syscore_ops.h> - -#include <mach/smemc.h> -#include <mach/pxa3xx-regs.h> - -#include "clock.h" - -/* Crystal clock: 13MHz */ -#define BASE_CLK 13000000 - -/* Ring Oscillator Clock: 60MHz */ -#define RO_CLK 60000000 - -#define ACCR_D0CS (1 << 26) -#define ACCR_PCCE (1 << 11) - -/* crystal frequency to HSIO bus frequency multiplier (HSS) */ -static unsigned char hss_mult[4] = { 8, 12, 16, 24 }; - -/* - * Get the clock frequency as reflected by CCSR and the turbo flag. - * We assume these values have been applied via a fcs. - * If info is not 0 we also display the current settings. - */ -unsigned int pxa3xx_get_clk_frequency_khz(int info) -{ - unsigned long acsr, xclkcfg; - unsigned int t, xl, xn, hss, ro, XL, XN, CLK, HSS; - - /* Read XCLKCFG register turbo bit */ - __asm__ __volatile__("mrc\tp14, 0, %0, c6, c0, 0" : "=r"(xclkcfg)); - t = xclkcfg & 0x1; - - acsr = ACSR; - - xl = acsr & 0x1f; - xn = (acsr >> 8) & 0x7; - hss = (acsr >> 14) & 0x3; - - XL = xl * BASE_CLK; - XN = xn * XL; - - ro = acsr & ACCR_D0CS; - - CLK = (ro) ? RO_CLK : ((t) ? XN : XL); - HSS = (ro) ? RO_CLK : hss_mult[hss] * BASE_CLK; - - if (info) { - pr_info("RO Mode clock: %d.%02dMHz (%sactive)\n", - RO_CLK / 1000000, (RO_CLK % 1000000) / 10000, - (ro) ? "" : "in"); - pr_info("Run Mode clock: %d.%02dMHz (*%d)\n", - XL / 1000000, (XL % 1000000) / 10000, xl); - pr_info("Turbo Mode clock: %d.%02dMHz (*%d, %sactive)\n", - XN / 1000000, (XN % 1000000) / 10000, xn, - (t) ? "" : "in"); - pr_info("HSIO bus clock: %d.%02dMHz\n", - HSS / 1000000, (HSS % 1000000) / 10000); - } - - return CLK / 1000; -} - -/* - * Return the current AC97 clock frequency. - */ -static unsigned long clk_pxa3xx_ac97_getrate(struct clk *clk) -{ - unsigned long rate = 312000000; - unsigned long ac97_div; - - ac97_div = AC97_DIV; - - /* This may loose precision for some rates but won't for the - * standard 24.576MHz. - */ - rate /= (ac97_div >> 12) & 0x7fff; - rate *= (ac97_div & 0xfff); - - return rate; -} - -/* - * Return the current HSIO bus clock frequency - */ -static unsigned long clk_pxa3xx_hsio_getrate(struct clk *clk) -{ - unsigned long acsr; - unsigned int hss, hsio_clk; - - acsr = ACSR; - - hss = (acsr >> 14) & 0x3; - hsio_clk = (acsr & ACCR_D0CS) ? RO_CLK : hss_mult[hss] * BASE_CLK; - - return hsio_clk; -} - -/* crystal frequency to static memory controller multiplier (SMCFS) */ -static unsigned int smcfs_mult[8] = { 6, 0, 8, 0, 0, 16, }; -static unsigned int df_clkdiv[4] = { 1, 2, 4, 1 }; - -static unsigned long clk_pxa3xx_smemc_getrate(struct clk *clk) -{ - unsigned long acsr = ACSR; - unsigned long memclkcfg = __raw_readl(MEMCLKCFG); - - return BASE_CLK * smcfs_mult[(acsr >> 23) & 0x7] / - df_clkdiv[(memclkcfg >> 16) & 0x3]; -} - -void clk_pxa3xx_cken_enable(struct clk *clk) -{ - unsigned long mask = 1ul << (clk->cken & 0x1f); - - if (clk->cken < 32) - CKENA |= mask; - else if (clk->cken < 64) - CKENB |= mask; - else - CKENC |= mask; -} - -void clk_pxa3xx_cken_disable(struct clk *clk) -{ - unsigned long mask = 1ul << (clk->cken & 0x1f); - - if (clk->cken < 32) - CKENA &= ~mask; - else if (clk->cken < 64) - CKENB &= ~mask; - else - CKENC &= ~mask; -} - -const struct clkops clk_pxa3xx_cken_ops = { - .enable = clk_pxa3xx_cken_enable, - .disable = clk_pxa3xx_cken_disable, -}; - -const struct clkops clk_pxa3xx_hsio_ops = { - .enable = clk_pxa3xx_cken_enable, - .disable = clk_pxa3xx_cken_disable, - .getrate = clk_pxa3xx_hsio_getrate, -}; - -const struct clkops clk_pxa3xx_ac97_ops = { - .enable = clk_pxa3xx_cken_enable, - .disable = clk_pxa3xx_cken_disable, - .getrate = clk_pxa3xx_ac97_getrate, -}; - -const struct clkops clk_pxa3xx_smemc_ops = { - .enable = clk_pxa3xx_cken_enable, - .disable = clk_pxa3xx_cken_disable, - .getrate = clk_pxa3xx_smemc_getrate, -}; - -static void clk_pout_enable(struct clk *clk) -{ - OSCC |= OSCC_PEN; -} - -static void clk_pout_disable(struct clk *clk) -{ - OSCC &= ~OSCC_PEN; -} - -const struct clkops clk_pxa3xx_pout_ops = { - .enable = clk_pout_enable, - .disable = clk_pout_disable, -}; - -#ifdef CONFIG_PM -static uint32_t cken[2]; -static uint32_t accr; - -static int pxa3xx_clock_suspend(void) -{ - cken[0] = CKENA; - cken[1] = CKENB; - accr = ACCR; - return 0; -} - -static void pxa3xx_clock_resume(void) -{ - ACCR = accr; - CKENA = cken[0]; - CKENB = cken[1]; -} -#else -#define pxa3xx_clock_suspend NULL -#define pxa3xx_clock_resume NULL -#endif - -struct syscore_ops pxa3xx_clock_syscore_ops = { - .suspend = pxa3xx_clock_suspend, - .resume = pxa3xx_clock_resume, -}; diff --git a/arch/arm/mach-pxa/clock.c b/arch/arm/mach-pxa/clock.c deleted file mode 100644 index 4d466102a..000000000 --- a/arch/arm/mach-pxa/clock.c +++ /dev/null @@ -1,86 +0,0 @@ -/* - * linux/arch/arm/mach-sa1100/clock.c - */ -#include <linux/module.h> -#include <linux/kernel.h> -#include <linux/clk.h> -#include <linux/spinlock.h> -#include <linux/delay.h> -#include <linux/clkdev.h> - -#include "clock.h" - -static DEFINE_SPINLOCK(clocks_lock); - -int clk_enable(struct clk *clk) -{ - unsigned long flags; - - spin_lock_irqsave(&clocks_lock, flags); - if (clk->enabled++ == 0) - clk->ops->enable(clk); - spin_unlock_irqrestore(&clocks_lock, flags); - - if (clk->delay) - udelay(clk->delay); - - return 0; -} -EXPORT_SYMBOL(clk_enable); - -void clk_disable(struct clk *clk) -{ - unsigned long flags; - - WARN_ON(clk->enabled == 0); - - spin_lock_irqsave(&clocks_lock, flags); - if (--clk->enabled == 0) - clk->ops->disable(clk); - spin_unlock_irqrestore(&clocks_lock, flags); -} -EXPORT_SYMBOL(clk_disable); - -unsigned long clk_get_rate(struct clk *clk) -{ - unsigned long rate; - - rate = clk->rate; - if (clk->ops->getrate) - rate = clk->ops->getrate(clk); - - return rate; -} -EXPORT_SYMBOL(clk_get_rate); - -int clk_set_rate(struct clk *clk, unsigned long rate) -{ - unsigned long flags; - int ret = -EINVAL; - - if (clk->ops->setrate) { - spin_lock_irqsave(&clocks_lock, flags); - ret = clk->ops->setrate(clk, rate); - spin_unlock_irqrestore(&clocks_lock, flags); - } - - return ret; -} -EXPORT_SYMBOL(clk_set_rate); - -void clk_dummy_enable(struct clk *clk) -{ -} - -void clk_dummy_disable(struct clk *clk) -{ -} - -const struct clkops clk_dummy_ops = { - .enable = clk_dummy_enable, - .disable = clk_dummy_disable, -}; - -struct clk clk_dummy = { - .ops = &clk_dummy_ops, -}; diff --git a/arch/arm/mach-pxa/clock.h b/arch/arm/mach-pxa/clock.h deleted file mode 100644 index 1f65d32c8..000000000 --- a/arch/arm/mach-pxa/clock.h +++ /dev/null @@ -1,80 +0,0 @@ -#include <linux/clkdev.h> -#include <linux/syscore_ops.h> - -struct clkops { - void (*enable)(struct clk *); - void (*disable)(struct clk *); - unsigned long (*getrate)(struct clk *); - int (*setrate)(struct clk *, unsigned long); -}; - -struct clk { - const struct clkops *ops; - unsigned long rate; - unsigned int cken; - unsigned int delay; - unsigned int enabled; -}; - -void clk_dummy_enable(struct clk *); -void clk_dummy_disable(struct clk *); - -extern const struct clkops clk_dummy_ops; -extern struct clk clk_dummy; - -#define INIT_CLKREG(_clk,_devname,_conname) \ - { \ - .clk = _clk, \ - .dev_id = _devname, \ - .con_id = _conname, \ - } - -#define DEFINE_CK(_name, _cken, _ops) \ -struct clk clk_##_name = { \ - .ops = _ops, \ - .cken = CKEN_##_cken, \ - } - -#define DEFINE_CLK(_name, _ops, _rate, _delay) \ -struct clk clk_##_name = { \ - .ops = _ops, \ - .rate = _rate, \ - .delay = _delay, \ - } - -#define DEFINE_PXA2_CKEN(_name, _cken, _rate, _delay) \ -struct clk clk_##_name = { \ - .ops = &clk_pxa2xx_cken_ops, \ - .rate = _rate, \ - .cken = CKEN_##_cken, \ - .delay = _delay, \ - } - -extern const struct clkops clk_pxa2xx_cken_ops; - -void clk_pxa2xx_cken_enable(struct clk *clk); -void clk_pxa2xx_cken_disable(struct clk *clk); - -extern struct syscore_ops pxa2xx_clock_syscore_ops; - -#if defined(CONFIG_PXA3xx) -#define DEFINE_PXA3_CKEN(_name, _cken, _rate, _delay) \ -struct clk clk_##_name = { \ - .ops = &clk_pxa3xx_cken_ops, \ - .rate = _rate, \ - .cken = CKEN_##_cken, \ - .delay = _delay, \ - } - -extern const struct clkops clk_pxa3xx_cken_ops; -extern const struct clkops clk_pxa3xx_hsio_ops; -extern const struct clkops clk_pxa3xx_ac97_ops; -extern const struct clkops clk_pxa3xx_pout_ops; -extern const struct clkops clk_pxa3xx_smemc_ops; - -extern void clk_pxa3xx_cken_enable(struct clk *); -extern void clk_pxa3xx_cken_disable(struct clk *); - -extern struct syscore_ops pxa3xx_clock_syscore_ops; - -#endif diff --git a/arch/arm/mach-pxa/eseries.c b/arch/arm/mach-pxa/eseries.c index cfb864173..16dc95f68 100644 --- a/arch/arm/mach-pxa/eseries.c +++ b/arch/arm/mach-pxa/eseries.c @@ -10,8 +10,10 @@ * */ +#include <linux/clkdev.h> #include <linux/kernel.h> #include <linux/init.h> +#include <linux/clk-provider.h> #include <linux/gpio.h> #include <linux/delay.h> #include <linux/platform_device.h> @@ -39,7 +41,6 @@ #include "devices.h" #include "generic.h" -#include "clock.h" /* Only e800 has 128MB RAM */ void __init eseries_fixup(struct tag *tags, char **cmdline) @@ -125,27 +126,9 @@ struct resource eseries_tmio_resources[] = { }; /* Some e-series hardware cannot control the 32K clock */ -static void clk_32k_dummy(struct clk *clk) -{ -} - -static const struct clkops clk_32k_dummy_ops = { - .enable = clk_32k_dummy, - .disable = clk_32k_dummy, -}; - -static struct clk tmio_dummy_clk = { - .ops = &clk_32k_dummy_ops, - .rate = 32768, -}; - -static struct clk_lookup eseries_clkregs[] = { - INIT_CLKREG(&tmio_dummy_clk, NULL, "CLK_CK32K"), -}; - static void __init eseries_register_clks(void) { - clkdev_add_table(eseries_clkregs, ARRAY_SIZE(eseries_clkregs)); + clk_register_fixed_rate(NULL, "CLK_CK32K", NULL, CLK_IS_ROOT, 32768); } #ifdef CONFIG_MACH_E330 @@ -683,7 +666,7 @@ static unsigned long e750_pin_config[] __initdata = { /* PC Card */ GPIO8_GPIO, /* CD0 */ GPIO44_GPIO, /* CD1 */ - GPIO11_GPIO, /* IRQ0 */ + /* GPIO11_GPIO, IRQ0 */ GPIO6_GPIO, /* IRQ1 */ GPIO27_GPIO, /* RST0 */ GPIO24_GPIO, /* RST1 */ @@ -778,6 +761,9 @@ static unsigned long e800_pin_config[] __initdata = { GPIO29_AC97_SDATA_IN_0, GPIO30_AC97_SDATA_OUT, GPIO31_AC97_SYNC, + + /* tc6393xb */ + GPIO11_3_6MHz, }; static struct w100_gen_regs e800_lcd_regs = { diff --git a/arch/arm/mach-pxa/generic.c b/arch/arm/mach-pxa/generic.c index 04b013fbc..ec510ecf8 100644 --- a/arch/arm/mach-pxa/generic.c +++ b/arch/arm/mach-pxa/generic.c @@ -63,6 +63,12 @@ EXPORT_SYMBOL(get_clock_tick_rate); */ void __init pxa_timer_init(void) { + if (cpu_is_pxa25x()) + pxa25x_clocks_init(); + if (cpu_is_pxa27x()) + pxa27x_clocks_init(); + if (cpu_is_pxa3xx()) + pxa3xx_clocks_init(); pxa_timer_nodt_init(IRQ_OST0, io_p2v(0x40a00000), get_clock_tick_rate()); } diff --git a/arch/arm/mach-pxa/generic.h b/arch/arm/mach-pxa/generic.h index 7a9fa1aa4..0b1dbb548 100644 --- a/arch/arm/mach-pxa/generic.h +++ b/arch/arm/mach-pxa/generic.h @@ -26,17 +26,20 @@ extern void pxa_timer_init(void); #define ARRAY_AND_SIZE(x) (x), ARRAY_SIZE(x) #define pxa25x_handle_irq icip_handle_irq +extern int __init pxa25x_clocks_init(void); extern void __init pxa25x_init_irq(void); extern void __init pxa25x_map_io(void); extern void __init pxa26x_init_irq(void); #define pxa27x_handle_irq ichp_handle_irq +extern int __init pxa27x_clocks_init(void); extern void __init pxa27x_dt_init_irq(void); extern unsigned pxa27x_get_clk_frequency_khz(int); extern void __init pxa27x_init_irq(void); extern void __init pxa27x_map_io(void); #define pxa3xx_handle_irq ichp_handle_irq +extern int __init pxa3xx_clocks_init(void); extern void __init pxa3xx_dt_init_irq(void); extern void __init pxa3xx_init_irq(void); extern void __init pxa3xx_map_io(void); diff --git a/arch/arm/mach-pxa/irq.c b/arch/arm/mach-pxa/irq.c index 89a7c0657..98608c557 100644 --- a/arch/arm/mach-pxa/irq.c +++ b/arch/arm/mach-pxa/irq.c @@ -138,7 +138,7 @@ static int pxa_irq_map(struct irq_domain *h, unsigned int virq, return 0; } -static struct irq_domain_ops pxa_irq_ops = { +static const struct irq_domain_ops pxa_irq_ops = { .map = pxa_irq_map, .xlate = irq_domain_xlate_onecell, }; diff --git a/arch/arm/mach-pxa/lubbock.c b/arch/arm/mach-pxa/lubbock.c index 4ac9ab80d..6de32fa0e 100644 --- a/arch/arm/mach-pxa/lubbock.c +++ b/arch/arm/mach-pxa/lubbock.c @@ -11,6 +11,7 @@ * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. */ +#include <linux/clkdev.h> #include <linux/gpio.h> #include <linux/gpio/machine.h> #include <linux/module.h> @@ -57,7 +58,6 @@ #include <mach/smemc.h> #include "generic.h" -#include "clock.h" #include "devices.h" static unsigned long lubbock_pin_config[] __initdata = { @@ -102,6 +102,9 @@ static unsigned long lubbock_pin_config[] __initdata = { GPIO6_MMC_CLK, GPIO8_MMC_CS0, + /* SA1111 chip */ + GPIO11_3_6MHz, + /* wakeup */ GPIO1_GPIO | WAKEUP_ON_EDGE_RISE, }; diff --git a/arch/arm/mach-pxa/mp900.c b/arch/arm/mach-pxa/mp900.c index 854f1f562..14f6aaf8f 100644 --- a/arch/arm/mach-pxa/mp900.c +++ b/arch/arm/mach-pxa/mp900.c @@ -28,7 +28,7 @@ static void isp116x_pfm_delay(struct device *dev, int delay) { - /* 400Mhz PXA2 = 2.5ns / instruction */ + /* 400MHz PXA2 = 2.5ns / instruction */ int cyc = delay / 10; diff --git a/arch/arm/mach-pxa/pxa25x.c b/arch/arm/mach-pxa/pxa25x.c index 66e4a2b63..23a90c62e 100644 --- a/arch/arm/mach-pxa/pxa25x.c +++ b/arch/arm/mach-pxa/pxa25x.c @@ -38,187 +38,11 @@ #include "generic.h" #include "devices.h" -#include "clock.h" /* * Various clock factors driven by the CCCR register. */ -/* Crystal Frequency to Memory Frequency Multiplier (L) */ -static unsigned char L_clk_mult[32] = { 0, 27, 32, 36, 40, 45, 0, }; - -/* Memory Frequency to Run Mode Frequency Multiplier (M) */ -static unsigned char M_clk_mult[4] = { 0, 1, 2, 4 }; - -/* Run Mode Frequency to Turbo Mode Frequency Multiplier (N) */ -/* Note: we store the value N * 2 here. */ -static unsigned char N2_clk_mult[8] = { 0, 0, 2, 3, 4, 0, 6, 0 }; - -/* Crystal clock */ -#define BASE_CLK 3686400 - -/* - * Get the clock frequency as reflected by CCCR and the turbo flag. - * We assume these values have been applied via a fcs. - * If info is not 0 we also display the current settings. - */ -unsigned int pxa25x_get_clk_frequency_khz(int info) -{ - unsigned long cccr, turbo; - unsigned int l, L, m, M, n2, N; - - cccr = CCCR; - asm( "mrc\tp14, 0, %0, c6, c0, 0" : "=r" (turbo) ); - - l = L_clk_mult[(cccr >> 0) & 0x1f]; - m = M_clk_mult[(cccr >> 5) & 0x03]; - n2 = N2_clk_mult[(cccr >> 7) & 0x07]; - - L = l * BASE_CLK; - M = m * L; - N = n2 * M / 2; - - if(info) - { - L += 5000; - printk( KERN_INFO "Memory clock: %d.%02dMHz (*%d)\n", - L / 1000000, (L % 1000000) / 10000, l ); - M += 5000; - printk( KERN_INFO "Run Mode clock: %d.%02dMHz (*%d)\n", - M / 1000000, (M % 1000000) / 10000, m ); - N += 5000; - printk( KERN_INFO "Turbo Mode clock: %d.%02dMHz (*%d.%d, %sactive)\n", - N / 1000000, (N % 1000000) / 10000, n2 / 2, (n2 % 2) * 5, - (turbo & 1) ? "" : "in" ); - } - - return (turbo & 1) ? (N/1000) : (M/1000); -} - -static unsigned long clk_pxa25x_mem_getrate(struct clk *clk) -{ - return L_clk_mult[(CCCR >> 0) & 0x1f] * BASE_CLK; -} - -static const struct clkops clk_pxa25x_mem_ops = { - .enable = clk_dummy_enable, - .disable = clk_dummy_disable, - .getrate = clk_pxa25x_mem_getrate, -}; - -static const struct clkops clk_pxa25x_lcd_ops = { - .enable = clk_pxa2xx_cken_enable, - .disable = clk_pxa2xx_cken_disable, - .getrate = clk_pxa25x_mem_getrate, -}; - -static unsigned long gpio12_config_32k[] = { - GPIO12_32KHz, -}; - -static unsigned long gpio12_config_gpio[] = { - GPIO12_GPIO, -}; - -static void clk_gpio12_enable(struct clk *clk) -{ - pxa2xx_mfp_config(gpio12_config_32k, 1); -} - -static void clk_gpio12_disable(struct clk *clk) -{ - pxa2xx_mfp_config(gpio12_config_gpio, 1); -} - -static const struct clkops clk_pxa25x_gpio12_ops = { - .enable = clk_gpio12_enable, - .disable = clk_gpio12_disable, -}; - -static unsigned long gpio11_config_3m6[] = { - GPIO11_3_6MHz, -}; - -static unsigned long gpio11_config_gpio[] = { - GPIO11_GPIO, -}; - -static void clk_gpio11_enable(struct clk *clk) -{ - pxa2xx_mfp_config(gpio11_config_3m6, 1); -} - -static void clk_gpio11_disable(struct clk *clk) -{ - pxa2xx_mfp_config(gpio11_config_gpio, 1); -} - -static const struct clkops clk_pxa25x_gpio11_ops = { - .enable = clk_gpio11_enable, - .disable = clk_gpio11_disable, -}; - -/* - * 3.6864MHz -> OST, GPIO, SSP, PWM, PLLs (95.842MHz, 147.456MHz) - * 95.842MHz -> MMC 19.169MHz, I2C 31.949MHz, FICP 47.923MHz, USB 47.923MHz - * 147.456MHz -> UART 14.7456MHz, AC97 12.288MHz, I2S 5.672MHz (allegedly) - */ - -/* - * PXA 2xx clock declarations. - */ -static DEFINE_PXA2_CKEN(pxa25x_hwuart, HWUART, 14745600, 1); -static DEFINE_PXA2_CKEN(pxa25x_ffuart, FFUART, 14745600, 1); -static DEFINE_PXA2_CKEN(pxa25x_btuart, BTUART, 14745600, 1); -static DEFINE_PXA2_CKEN(pxa25x_stuart, STUART, 14745600, 1); -static DEFINE_PXA2_CKEN(pxa25x_usb, USB, 47923000, 5); -static DEFINE_PXA2_CKEN(pxa25x_mmc, MMC, 19169000, 0); -static DEFINE_PXA2_CKEN(pxa25x_i2c, I2C, 31949000, 0); -static DEFINE_PXA2_CKEN(pxa25x_ssp, SSP, 3686400, 0); -static DEFINE_PXA2_CKEN(pxa25x_nssp, NSSP, 3686400, 0); -static DEFINE_PXA2_CKEN(pxa25x_assp, ASSP, 3686400, 0); -static DEFINE_PXA2_CKEN(pxa25x_pwm0, PWM0, 3686400, 0); -static DEFINE_PXA2_CKEN(pxa25x_pwm1, PWM1, 3686400, 0); -static DEFINE_PXA2_CKEN(pxa25x_ac97, AC97, 24576000, 0); -static DEFINE_PXA2_CKEN(pxa25x_i2s, I2S, 14745600, 0); -static DEFINE_PXA2_CKEN(pxa25x_ficp, FICP, 47923000, 0); - -static DEFINE_CK(pxa25x_lcd, LCD, &clk_pxa25x_lcd_ops); -static DEFINE_CLK(pxa25x_gpio11, &clk_pxa25x_gpio11_ops, 3686400, 0); -static DEFINE_CLK(pxa25x_gpio12, &clk_pxa25x_gpio12_ops, 32768, 0); -static DEFINE_CLK(pxa25x_mem, &clk_pxa25x_mem_ops, 0, 0); - -static struct clk_lookup pxa25x_clkregs[] = { - INIT_CLKREG(&clk_pxa25x_lcd, "pxa2xx-fb", NULL), - INIT_CLKREG(&clk_pxa25x_ffuart, "pxa2xx-uart.0", NULL), - INIT_CLKREG(&clk_pxa25x_btuart, "pxa2xx-uart.1", NULL), - INIT_CLKREG(&clk_pxa25x_stuart, "pxa2xx-uart.2", NULL), - INIT_CLKREG(&clk_pxa25x_usb, "pxa25x-udc", NULL), - INIT_CLKREG(&clk_pxa25x_mmc, "pxa2xx-mci.0", NULL), - INIT_CLKREG(&clk_pxa25x_i2c, "pxa2xx-i2c.0", NULL), - INIT_CLKREG(&clk_pxa25x_ssp, "pxa25x-ssp.0", NULL), - INIT_CLKREG(&clk_pxa25x_nssp, "pxa25x-nssp.1", NULL), - INIT_CLKREG(&clk_pxa25x_assp, "pxa25x-nssp.2", NULL), - INIT_CLKREG(&clk_pxa25x_pwm0, "pxa25x-pwm.0", NULL), - INIT_CLKREG(&clk_pxa25x_pwm1, "pxa25x-pwm.1", NULL), - INIT_CLKREG(&clk_pxa25x_i2s, "pxa2xx-i2s", NULL), - INIT_CLKREG(&clk_pxa25x_stuart, "pxa2xx-ir", "UARTCLK"), - INIT_CLKREG(&clk_pxa25x_ficp, "pxa2xx-ir", "FICPCLK"), - INIT_CLKREG(&clk_pxa25x_ac97, NULL, "AC97CLK"), - INIT_CLKREG(&clk_pxa25x_gpio11, NULL, "GPIO11_CLK"), - INIT_CLKREG(&clk_pxa25x_gpio12, NULL, "GPIO12_CLK"), - INIT_CLKREG(&clk_pxa25x_mem, "pxa2xx-pcmcia", NULL), -#ifdef CONFIG_CPU_PXA26x - INIT_CLKREG(&clk_dummy, "pxa26x-gpio", NULL), -#else - INIT_CLKREG(&clk_dummy, "pxa25x-gpio", NULL), -#endif - INIT_CLKREG(&clk_dummy, "sa1100-rtc", NULL), -}; - -static struct clk_lookup pxa25x_hwuart_clkreg = - INIT_CLKREG(&clk_pxa25x_hwuart, "pxa2xx-uart.3", NULL); - #ifdef CONFIG_PM #define SAVE(x) sleep_save[SLEEP_SAVE_##x] = x @@ -374,8 +198,6 @@ static int __init pxa25x_init(void) reset_status = RCSR; - clkdev_add_table(pxa25x_clkregs, ARRAY_SIZE(pxa25x_clkregs)); - if ((ret = pxa_init_dma(IRQ_DMA, 16))) return ret; @@ -383,7 +205,6 @@ static int __init pxa25x_init(void) register_syscore_ops(&pxa_irq_syscore_ops); register_syscore_ops(&pxa2xx_mfp_syscore_ops); - register_syscore_ops(&pxa2xx_clock_syscore_ops); pxa_register_device(&pxa25x_device_gpio, &pxa25x_gpio_info); ret = platform_add_devices(pxa25x_devices, @@ -392,10 +213,6 @@ static int __init pxa25x_init(void) return ret; } - /* Only add HWUART for PXA255/26x; PXA210/250 do not have it. */ - if (cpu_is_pxa255()) - clkdev_add(&pxa25x_hwuart_clkreg); - return ret; } diff --git a/arch/arm/mach-pxa/pxa27x.c b/arch/arm/mach-pxa/pxa27x.c index af423a48c..b5abdeb5b 100644 --- a/arch/arm/mach-pxa/pxa27x.c +++ b/arch/arm/mach-pxa/pxa27x.c @@ -37,7 +37,8 @@ #include "generic.h" #include "devices.h" -#include "clock.h" +#include <linux/clk-provider.h> +#include <linux/clkdev.h> void pxa27x_clear_otgph(void) { @@ -73,174 +74,6 @@ void pxa27x_configure_ac97reset(int reset_gpio, bool to_gpio) } EXPORT_SYMBOL_GPL(pxa27x_configure_ac97reset); -/* Crystal clock: 13MHz */ -#define BASE_CLK 13000000 - -/* - * Get the clock frequency as reflected by CCSR and the turbo flag. - * We assume these values have been applied via a fcs. - * If info is not 0 we also display the current settings. - */ -unsigned int pxa27x_get_clk_frequency_khz(int info) -{ - unsigned long ccsr, clkcfg; - unsigned int l, L, m, M, n2, N, S; - int cccr_a, t, ht, b; - - ccsr = CCSR; - cccr_a = CCCR & (1 << 25); - - /* Read clkcfg register: it has turbo, b, half-turbo (and f) */ - asm( "mrc\tp14, 0, %0, c6, c0, 0" : "=r" (clkcfg) ); - t = clkcfg & (1 << 0); - ht = clkcfg & (1 << 2); - b = clkcfg & (1 << 3); - - l = ccsr & 0x1f; - n2 = (ccsr>>7) & 0xf; - m = (l <= 10) ? 1 : (l <= 20) ? 2 : 4; - - L = l * BASE_CLK; - N = (L * n2) / 2; - M = (!cccr_a) ? (L/m) : ((b) ? L : (L/2)); - S = (b) ? L : (L/2); - - if (info) { - printk( KERN_INFO "Run Mode clock: %d.%02dMHz (*%d)\n", - L / 1000000, (L % 1000000) / 10000, l ); - printk( KERN_INFO "Turbo Mode clock: %d.%02dMHz (*%d.%d, %sactive)\n", - N / 1000000, (N % 1000000)/10000, n2 / 2, (n2 % 2)*5, - (t) ? "" : "in" ); - printk( KERN_INFO "Memory clock: %d.%02dMHz (/%d)\n", - M / 1000000, (M % 1000000) / 10000, m ); - printk( KERN_INFO "System bus clock: %d.%02dMHz \n", - S / 1000000, (S % 1000000) / 10000 ); - } - - return (t) ? (N/1000) : (L/1000); -} - -/* - * Return the current mem clock frequency as reflected by CCCR[A], B, and L - */ -static unsigned long clk_pxa27x_mem_getrate(struct clk *clk) -{ - unsigned long ccsr, clkcfg; - unsigned int l, L, m, M; - int cccr_a, b; - - ccsr = CCSR; - cccr_a = CCCR & (1 << 25); - - /* Read clkcfg register: it has turbo, b, half-turbo (and f) */ - asm( "mrc\tp14, 0, %0, c6, c0, 0" : "=r" (clkcfg) ); - b = clkcfg & (1 << 3); - - l = ccsr & 0x1f; - m = (l <= 10) ? 1 : (l <= 20) ? 2 : 4; - - L = l * BASE_CLK; - M = (!cccr_a) ? (L/m) : ((b) ? L : (L/2)); - - return M; -} - -static const struct clkops clk_pxa27x_mem_ops = { - .enable = clk_dummy_enable, - .disable = clk_dummy_disable, - .getrate = clk_pxa27x_mem_getrate, -}; - -/* - * Return the current LCD clock frequency in units of 10kHz as - */ -static unsigned int pxa27x_get_lcdclk_frequency_10khz(void) -{ - unsigned long ccsr; - unsigned int l, L, k, K; - - ccsr = CCSR; - - l = ccsr & 0x1f; - k = (l <= 7) ? 1 : (l <= 16) ? 2 : 4; - - L = l * BASE_CLK; - K = L / k; - - return (K / 10000); -} - -static unsigned long clk_pxa27x_lcd_getrate(struct clk *clk) -{ - return pxa27x_get_lcdclk_frequency_10khz() * 10000; -} - -static const struct clkops clk_pxa27x_lcd_ops = { - .enable = clk_pxa2xx_cken_enable, - .disable = clk_pxa2xx_cken_disable, - .getrate = clk_pxa27x_lcd_getrate, -}; - -static DEFINE_PXA2_CKEN(pxa27x_ffuart, FFUART, 14857000, 1); -static DEFINE_PXA2_CKEN(pxa27x_btuart, BTUART, 14857000, 1); -static DEFINE_PXA2_CKEN(pxa27x_stuart, STUART, 14857000, 1); -static DEFINE_PXA2_CKEN(pxa27x_i2s, I2S, 14682000, 0); -static DEFINE_PXA2_CKEN(pxa27x_i2c, I2C, 32842000, 0); -static DEFINE_PXA2_CKEN(pxa27x_usb, USB, 48000000, 5); -static DEFINE_PXA2_CKEN(pxa27x_mmc, MMC, 19500000, 0); -static DEFINE_PXA2_CKEN(pxa27x_ficp, FICP, 48000000, 0); -static DEFINE_PXA2_CKEN(pxa27x_usbhost, USBHOST, 48000000, 0); -static DEFINE_PXA2_CKEN(pxa27x_pwri2c, PWRI2C, 13000000, 0); -static DEFINE_PXA2_CKEN(pxa27x_keypad, KEYPAD, 32768, 0); -static DEFINE_PXA2_CKEN(pxa27x_ssp1, SSP1, 13000000, 0); -static DEFINE_PXA2_CKEN(pxa27x_ssp2, SSP2, 13000000, 0); -static DEFINE_PXA2_CKEN(pxa27x_ssp3, SSP3, 13000000, 0); -static DEFINE_PXA2_CKEN(pxa27x_pwm0, PWM0, 13000000, 0); -static DEFINE_PXA2_CKEN(pxa27x_pwm1, PWM1, 13000000, 0); -static DEFINE_PXA2_CKEN(pxa27x_ac97, AC97, 24576000, 0); -static DEFINE_PXA2_CKEN(pxa27x_ac97conf, AC97CONF, 24576000, 0); -static DEFINE_PXA2_CKEN(pxa27x_msl, MSL, 48000000, 0); -static DEFINE_PXA2_CKEN(pxa27x_usim, USIM, 48000000, 0); -static DEFINE_PXA2_CKEN(pxa27x_memstk, MEMSTK, 19500000, 0); -static DEFINE_PXA2_CKEN(pxa27x_im, IM, 0, 0); -static DEFINE_PXA2_CKEN(pxa27x_memc, MEMC, 0, 0); - -static DEFINE_CK(pxa27x_lcd, LCD, &clk_pxa27x_lcd_ops); -static DEFINE_CK(pxa27x_camera, CAMERA, &clk_pxa27x_lcd_ops); -static DEFINE_CLK(pxa27x_mem, &clk_pxa27x_mem_ops, 0, 0); - -static struct clk_lookup pxa27x_clkregs[] = { - INIT_CLKREG(&clk_pxa27x_lcd, "pxa2xx-fb", NULL), - INIT_CLKREG(&clk_pxa27x_camera, "pxa27x-camera.0", NULL), - INIT_CLKREG(&clk_pxa27x_ffuart, "pxa2xx-uart.0", NULL), - INIT_CLKREG(&clk_pxa27x_btuart, "pxa2xx-uart.1", NULL), - INIT_CLKREG(&clk_pxa27x_stuart, "pxa2xx-uart.2", NULL), - INIT_CLKREG(&clk_pxa27x_i2s, "pxa2xx-i2s", NULL), - INIT_CLKREG(&clk_pxa27x_i2c, "pxa2xx-i2c.0", NULL), - INIT_CLKREG(&clk_pxa27x_usb, "pxa27x-udc", NULL), - INIT_CLKREG(&clk_pxa27x_mmc, "pxa2xx-mci.0", NULL), - INIT_CLKREG(&clk_pxa27x_stuart, "pxa2xx-ir", "UARTCLK"), - INIT_CLKREG(&clk_pxa27x_ficp, "pxa2xx-ir", "FICPCLK"), - INIT_CLKREG(&clk_pxa27x_usbhost, "pxa27x-ohci", NULL), - INIT_CLKREG(&clk_pxa27x_pwri2c, "pxa2xx-i2c.1", NULL), - INIT_CLKREG(&clk_pxa27x_keypad, "pxa27x-keypad", NULL), - INIT_CLKREG(&clk_pxa27x_ssp1, "pxa27x-ssp.0", NULL), - INIT_CLKREG(&clk_pxa27x_ssp2, "pxa27x-ssp.1", NULL), - INIT_CLKREG(&clk_pxa27x_ssp3, "pxa27x-ssp.2", NULL), - INIT_CLKREG(&clk_pxa27x_pwm0, "pxa27x-pwm.0", NULL), - INIT_CLKREG(&clk_pxa27x_pwm1, "pxa27x-pwm.1", NULL), - INIT_CLKREG(&clk_pxa27x_ac97, NULL, "AC97CLK"), - INIT_CLKREG(&clk_pxa27x_ac97conf, NULL, "AC97CONFCLK"), - INIT_CLKREG(&clk_pxa27x_msl, NULL, "MSLCLK"), - INIT_CLKREG(&clk_pxa27x_usim, NULL, "USIMCLK"), - INIT_CLKREG(&clk_pxa27x_memstk, NULL, "MSTKCLK"), - INIT_CLKREG(&clk_pxa27x_im, NULL, "IMCLK"), - INIT_CLKREG(&clk_pxa27x_memc, NULL, "MEMCLK"), - INIT_CLKREG(&clk_pxa27x_mem, "pxa2xx-pcmcia", NULL), - INIT_CLKREG(&clk_dummy, "pxa27x-gpio", NULL), - INIT_CLKREG(&clk_dummy, "sa1100-rtc", NULL), -}; - #ifdef CONFIG_PM #define SAVE(x) sleep_save[SLEEP_SAVE_##x] = x @@ -466,8 +299,6 @@ static int __init pxa27x_init(void) reset_status = RCSR; - clkdev_add_table(pxa27x_clkregs, ARRAY_SIZE(pxa27x_clkregs)); - if ((ret = pxa_init_dma(IRQ_DMA, 32))) return ret; @@ -475,10 +306,13 @@ static int __init pxa27x_init(void) register_syscore_ops(&pxa_irq_syscore_ops); register_syscore_ops(&pxa2xx_mfp_syscore_ops); - register_syscore_ops(&pxa2xx_clock_syscore_ops); - pxa_register_device(&pxa27x_device_gpio, &pxa27x_gpio_info); - ret = platform_add_devices(devices, ARRAY_SIZE(devices)); + if (!of_have_populated_dt()) { + pxa_register_device(&pxa27x_device_gpio, + &pxa27x_gpio_info); + ret = platform_add_devices(devices, + ARRAY_SIZE(devices)); + } } return ret; diff --git a/arch/arm/mach-pxa/pxa300.c b/arch/arm/mach-pxa/pxa300.c index 17cbc0c7b..28c5b5686 100644 --- a/arch/arm/mach-pxa/pxa300.c +++ b/arch/arm/mach-pxa/pxa300.c @@ -22,7 +22,6 @@ #include "generic.h" #include "devices.h" -#include "clock.h" static struct mfp_addr_map pxa300_mfp_addr_map[] __initdata = { @@ -84,32 +83,15 @@ static struct mfp_addr_map pxa310_mfp_addr_map[] __initdata = { MFP_ADDR_END, }; -static DEFINE_PXA3_CKEN(common_nand, NAND, 156000000, 0); -static DEFINE_PXA3_CKEN(gcu, PXA300_GCU, 0, 0); - -static struct clk_lookup common_clkregs[] = { - INIT_CLKREG(&clk_common_nand, "pxa3xx-nand", NULL), - INIT_CLKREG(&clk_gcu, "pxa3xx-gcu", NULL), -}; - -static DEFINE_PXA3_CKEN(pxa310_mmc3, MMC3, 19500000, 0); - -static struct clk_lookup pxa310_clkregs[] = { - INIT_CLKREG(&clk_pxa310_mmc3, "pxa2xx-mci.2", NULL), -}; - static int __init pxa300_init(void) { if (cpu_is_pxa300() || cpu_is_pxa310()) { mfp_init_base(io_p2v(MFPR_BASE)); mfp_init_addr(pxa300_mfp_addr_map); - clkdev_add_table(ARRAY_AND_SIZE(common_clkregs)); } - if (cpu_is_pxa310()) { + if (cpu_is_pxa310()) mfp_init_addr(pxa310_mfp_addr_map); - clkdev_add_table(ARRAY_AND_SIZE(pxa310_clkregs)); - } return 0; } diff --git a/arch/arm/mach-pxa/pxa320.c b/arch/arm/mach-pxa/pxa320.c index 6dc99d4f2..2f55bb4b9 100644 --- a/arch/arm/mach-pxa/pxa320.c +++ b/arch/arm/mach-pxa/pxa320.c @@ -22,7 +22,6 @@ #include "generic.h" #include "devices.h" -#include "clock.h" static struct mfp_addr_map pxa320_mfp_addr_map[] __initdata = { @@ -78,20 +77,11 @@ static struct mfp_addr_map pxa320_mfp_addr_map[] __initdata = { MFP_ADDR_END, }; -static DEFINE_PXA3_CKEN(pxa320_nand, NAND, 104000000, 0); -static DEFINE_PXA3_CKEN(gcu, PXA320_GCU, 0, 0); - -static struct clk_lookup pxa320_clkregs[] = { - INIT_CLKREG(&clk_pxa320_nand, "pxa3xx-nand", NULL), - INIT_CLKREG(&clk_gcu, "pxa3xx-gcu", NULL), -}; - static int __init pxa320_init(void) { if (cpu_is_pxa320()) { mfp_init_base(io_p2v(MFPR_BASE)); mfp_init_addr(pxa320_mfp_addr_map); - clkdev_add_table(ARRAY_AND_SIZE(pxa320_clkregs)); } return 0; diff --git a/arch/arm/mach-pxa/pxa3xx.c b/arch/arm/mach-pxa/pxa3xx.c index edcbd9c0b..bd4cbef15 100644 --- a/arch/arm/mach-pxa/pxa3xx.c +++ b/arch/arm/mach-pxa/pxa3xx.c @@ -37,67 +37,11 @@ #include "generic.h" #include "devices.h" -#include "clock.h" #define PECR_IE(n) ((1 << ((n) * 2)) << 28) #define PECR_IS(n) ((1 << ((n) * 2)) << 29) extern void __init pxa_dt_irq_init(int (*fn)(struct irq_data *, unsigned int)); - -static DEFINE_PXA3_CKEN(pxa3xx_ffuart, FFUART, 14857000, 1); -static DEFINE_PXA3_CKEN(pxa3xx_btuart, BTUART, 14857000, 1); -static DEFINE_PXA3_CKEN(pxa3xx_stuart, STUART, 14857000, 1); -static DEFINE_PXA3_CKEN(pxa3xx_i2c, I2C, 32842000, 0); -static DEFINE_PXA3_CKEN(pxa3xx_udc, UDC, 48000000, 5); -static DEFINE_PXA3_CKEN(pxa3xx_usbh, USBH, 48000000, 0); -static DEFINE_PXA3_CKEN(pxa3xx_u2d, USB2, 48000000, 0); -static DEFINE_PXA3_CKEN(pxa3xx_keypad, KEYPAD, 32768, 0); -static DEFINE_PXA3_CKEN(pxa3xx_ssp1, SSP1, 13000000, 0); -static DEFINE_PXA3_CKEN(pxa3xx_ssp2, SSP2, 13000000, 0); -static DEFINE_PXA3_CKEN(pxa3xx_ssp3, SSP3, 13000000, 0); -static DEFINE_PXA3_CKEN(pxa3xx_ssp4, SSP4, 13000000, 0); -static DEFINE_PXA3_CKEN(pxa3xx_pwm0, PWM0, 13000000, 0); -static DEFINE_PXA3_CKEN(pxa3xx_pwm1, PWM1, 13000000, 0); -static DEFINE_PXA3_CKEN(pxa3xx_mmc1, MMC1, 19500000, 0); -static DEFINE_PXA3_CKEN(pxa3xx_mmc2, MMC2, 19500000, 0); -static DEFINE_PXA3_CKEN(pxa3xx_gpio, GPIO, 13000000, 0); - -static DEFINE_CK(pxa3xx_lcd, LCD, &clk_pxa3xx_hsio_ops); -static DEFINE_CK(pxa3xx_smemc, SMC, &clk_pxa3xx_smemc_ops); -static DEFINE_CK(pxa3xx_camera, CAMERA, &clk_pxa3xx_hsio_ops); -static DEFINE_CK(pxa3xx_ac97, AC97, &clk_pxa3xx_ac97_ops); -static DEFINE_CLK(pxa3xx_pout, &clk_pxa3xx_pout_ops, 13000000, 70); - -static struct clk_lookup pxa3xx_clkregs[] = { - INIT_CLKREG(&clk_pxa3xx_pout, NULL, "CLK_POUT"), - /* Power I2C clock is always on */ - INIT_CLKREG(&clk_dummy, "pxa3xx-pwri2c.1", NULL), - INIT_CLKREG(&clk_pxa3xx_lcd, "pxa2xx-fb", NULL), - INIT_CLKREG(&clk_pxa3xx_camera, NULL, "CAMCLK"), - INIT_CLKREG(&clk_pxa3xx_ac97, NULL, "AC97CLK"), - INIT_CLKREG(&clk_pxa3xx_ffuart, "pxa2xx-uart.0", NULL), - INIT_CLKREG(&clk_pxa3xx_btuart, "pxa2xx-uart.1", NULL), - INIT_CLKREG(&clk_pxa3xx_stuart, "pxa2xx-uart.2", NULL), - INIT_CLKREG(&clk_pxa3xx_stuart, "pxa2xx-ir", "UARTCLK"), - INIT_CLKREG(&clk_pxa3xx_i2c, "pxa2xx-i2c.0", NULL), - INIT_CLKREG(&clk_pxa3xx_udc, "pxa27x-udc", NULL), - INIT_CLKREG(&clk_pxa3xx_usbh, "pxa27x-ohci", NULL), - INIT_CLKREG(&clk_pxa3xx_u2d, "pxa3xx-u2d", NULL), - INIT_CLKREG(&clk_pxa3xx_keypad, "pxa27x-keypad", NULL), - INIT_CLKREG(&clk_pxa3xx_ssp1, "pxa3xx-ssp.0", NULL), - INIT_CLKREG(&clk_pxa3xx_ssp2, "pxa3xx-ssp.1", NULL), - INIT_CLKREG(&clk_pxa3xx_ssp3, "pxa3xx-ssp.2", NULL), - INIT_CLKREG(&clk_pxa3xx_ssp4, "pxa3xx-ssp.3", NULL), - INIT_CLKREG(&clk_pxa3xx_pwm0, "pxa27x-pwm.0", NULL), - INIT_CLKREG(&clk_pxa3xx_pwm1, "pxa27x-pwm.1", NULL), - INIT_CLKREG(&clk_pxa3xx_mmc1, "pxa2xx-mci.0", NULL), - INIT_CLKREG(&clk_pxa3xx_mmc2, "pxa2xx-mci.1", NULL), - INIT_CLKREG(&clk_pxa3xx_smemc, "pxa2xx-pcmcia", NULL), - INIT_CLKREG(&clk_pxa3xx_gpio, "pxa3xx-gpio", NULL), - INIT_CLKREG(&clk_pxa3xx_gpio, "pxa93x-gpio", NULL), - INIT_CLKREG(&clk_dummy, "sa1100-rtc", NULL), -}; - #ifdef CONFIG_PM #define ISRAM_START 0x5c000000 @@ -476,8 +420,6 @@ static int __init pxa3xx_init(void) */ ASCR &= ~(ASCR_RDH | ASCR_D1S | ASCR_D2S | ASCR_D3S); - clkdev_add_table(pxa3xx_clkregs, ARRAY_SIZE(pxa3xx_clkregs)); - if ((ret = pxa_init_dma(IRQ_DMA, 32))) return ret; @@ -485,7 +427,6 @@ static int __init pxa3xx_init(void) register_syscore_ops(&pxa_irq_syscore_ops); register_syscore_ops(&pxa3xx_mfp_syscore_ops); - register_syscore_ops(&pxa3xx_clock_syscore_ops); if (of_have_populated_dt()) return 0; diff --git a/arch/arm/mach-pxa/raumfeld.c b/arch/arm/mach-pxa/raumfeld.c index 6dc4f025e..88f70c37a 100644 --- a/arch/arm/mach-pxa/raumfeld.c +++ b/arch/arm/mach-pxa/raumfeld.c @@ -56,7 +56,6 @@ #include "generic.h" #include "devices.h" -#include "clock.h" /* common GPIO definitions */ diff --git a/arch/arm/mach-pxa/tosa.c b/arch/arm/mach-pxa/tosa.c index 7780d1faa..e6e27c046 100644 --- a/arch/arm/mach-pxa/tosa.c +++ b/arch/arm/mach-pxa/tosa.c @@ -12,6 +12,7 @@ * */ +#include <linux/clkdev.h> #include <linux/kernel.h> #include <linux/init.h> #include <linux/platform_device.h> @@ -58,7 +59,6 @@ #include <asm/mach/sharpsl_param.h> #include "generic.h" -#include "clock.h" #include "devices.h" static unsigned long tosa_pin_config[] = { diff --git a/arch/arm/mach-realview/core.c b/arch/arm/mach-realview/core.c index c309593ab..44575edc4 100644 --- a/arch/arm/mach-realview/core.c +++ b/arch/arm/mach-realview/core.c @@ -35,20 +35,19 @@ #include <linux/mtd/physmap.h> #include <linux/memblock.h> +#include <clocksource/timer-sp804.h> + #include <mach/hardware.h> #include <asm/irq.h> #include <asm/mach-types.h> -#include <asm/hardware/arm_timer.h> #include <asm/hardware/icst.h> #include <asm/mach/arch.h> #include <asm/mach/irq.h> #include <asm/mach/map.h> - #include <mach/platform.h> #include <mach/irqs.h> -#include <asm/hardware/timer-sp.h> #include <plat/sched_clock.h> @@ -381,10 +380,10 @@ void __init realview_timer_init(unsigned int timer_irq) /* * Initialise to a known state (all timers off) */ - writel(0, timer0_va_base + TIMER_CTRL); - writel(0, timer1_va_base + TIMER_CTRL); - writel(0, timer2_va_base + TIMER_CTRL); - writel(0, timer3_va_base + TIMER_CTRL); + sp804_timer_disable(timer0_va_base); + sp804_timer_disable(timer1_va_base); + sp804_timer_disable(timer2_va_base); + sp804_timer_disable(timer3_va_base); sp804_clocksource_init(timer3_va_base, "timer3"); sp804_clockevents_init(timer0_va_base, timer_irq, "timer0"); diff --git a/arch/arm/mach-rockchip/core.h b/arch/arm/mach-rockchip/core.h index 39bca96b5..492c04881 100644 --- a/arch/arm/mach-rockchip/core.h +++ b/arch/arm/mach-rockchip/core.h @@ -17,4 +17,3 @@ extern char rockchip_secondary_trampoline; extern char rockchip_secondary_trampoline_end; extern unsigned long rockchip_boot_fn; -extern void rockchip_secondary_startup(void); diff --git a/arch/arm/mach-rockchip/headsmp.S b/arch/arm/mach-rockchip/headsmp.S index 46c22dedf..d69708b07 100644 --- a/arch/arm/mach-rockchip/headsmp.S +++ b/arch/arm/mach-rockchip/headsmp.S @@ -15,14 +15,6 @@ #include <linux/linkage.h> #include <linux/init.h> -ENTRY(rockchip_secondary_startup) - mrc p15, 0, r0, c0, c0, 0 @ read main ID register - ldr r1, =0x00000c09 @ Cortex-A9 primary part number - teq r0, r1 - beq v7_invalidate_l1 - b secondary_startup -ENDPROC(rockchip_secondary_startup) - ENTRY(rockchip_secondary_trampoline) ldr pc, 1f ENDPROC(rockchip_secondary_trampoline) diff --git a/arch/arm/mach-rockchip/platsmp.c b/arch/arm/mach-rockchip/platsmp.c index 5b4ca3c3c..8fcec1cc1 100644 --- a/arch/arm/mach-rockchip/platsmp.c +++ b/arch/arm/mach-rockchip/platsmp.c @@ -119,8 +119,7 @@ static int pmu_set_power_domain(int pd, bool on) * Handling of CPU cores */ -static int __cpuinit rockchip_boot_secondary(unsigned int cpu, - struct task_struct *idle) +static int rockchip_boot_secondary(unsigned int cpu, struct task_struct *idle) { int ret; @@ -149,8 +148,7 @@ static int __cpuinit rockchip_boot_secondary(unsigned int cpu, * sram_base_addr + 8: start address for pc * */ udelay(10); - writel(virt_to_phys(rockchip_secondary_startup), - sram_base_addr + 8); + writel(virt_to_phys(secondary_startup), sram_base_addr + 8); writel(0xDEADBEAF, sram_base_addr + 4); dsb_sev(); } @@ -189,7 +187,7 @@ static int __init rockchip_smp_prepare_sram(struct device_node *node) } /* set the boot function for the sram code */ - rockchip_boot_fn = virt_to_phys(rockchip_secondary_startup); + rockchip_boot_fn = virt_to_phys(secondary_startup); /* copy the trampoline to sram, that runs during startup of the core */ memcpy(sram_base_addr, &rockchip_secondary_trampoline, trampoline_sz); diff --git a/arch/arm/mach-sa1100/Makefile b/arch/arm/mach-sa1100/Makefile index 61ff91e76..ebc4d58e1 100644 --- a/arch/arm/mach-sa1100/Makefile +++ b/arch/arm/mach-sa1100/Makefile @@ -3,7 +3,7 @@ # # Common support -obj-y := clock.o generic.o irq.o #nmi-oopser.o +obj-y := clock.o generic.o #nmi-oopser.o # Specific board support obj-$(CONFIG_SA1100_ASSABET) += assabet.o diff --git a/arch/arm/mach-sa1100/generic.c b/arch/arm/mach-sa1100/generic.c index 40e0d8619..345e63f4e 100644 --- a/arch/arm/mach-sa1100/generic.c +++ b/arch/arm/mach-sa1100/generic.c @@ -20,9 +20,12 @@ #include <linux/ioport.h> #include <linux/platform_device.h> #include <linux/reboot.h> +#include <linux/irqchip/irq-sa11x0.h> #include <video/sa1100fb.h> +#include <soc/sa1100/pwer.h> + #include <asm/div64.h> #include <asm/mach/map.h> #include <asm/mach/flash.h> @@ -375,6 +378,18 @@ void __init sa1100_timer_init(void) pxa_timer_nodt_init(IRQ_OST0, io_p2v(0x90000000), 3686400); } +static struct resource irq_resource = + DEFINE_RES_MEM_NAMED(0x90050000, SZ_64K, "irqs"); + +void __init sa1100_init_irq(void) +{ + request_resource(&iomem_resource, &irq_resource); + + sa11x0_init_irq_nodt(IRQ_GPIO0_SC, irq_resource.start); + + sa1100_init_gpio(); +} + /* * Disable the memory bus request/grant signals on the SA1110 to * ensure that we don't receive spurious memory requests. We set @@ -416,3 +431,25 @@ void sa1110_mb_enable(void) local_irq_restore(flags); } +int sa11x0_gpio_set_wake(unsigned int gpio, unsigned int on) +{ + if (on) + PWER |= BIT(gpio); + else + PWER &= ~BIT(gpio); + + return 0; +} + +int sa11x0_sc_set_wake(unsigned int irq, unsigned int on) +{ + if (BIT(irq) != IC_RTCAlrm) + return -EINVAL; + + if (on) + PWER |= PWER_RTC; + else + PWER &= ~PWER_RTC; + + return 0; +} diff --git a/arch/arm/mach-sa1100/irq.c b/arch/arm/mach-sa1100/irq.c deleted file mode 100644 index 65aebfa66..000000000 --- a/arch/arm/mach-sa1100/irq.c +++ /dev/null @@ -1,178 +0,0 @@ -/* - * linux/arch/arm/mach-sa1100/irq.c - * - * Copyright (C) 1999-2001 Nicolas Pitre - * - * Generic IRQ handling for the SA11x0, GPIO 11-27 IRQ demultiplexing. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ -#include <linux/init.h> -#include <linux/module.h> -#include <linux/interrupt.h> -#include <linux/io.h> -#include <linux/irq.h> -#include <linux/irqdomain.h> -#include <linux/ioport.h> -#include <linux/syscore_ops.h> - -#include <mach/hardware.h> -#include <mach/irqs.h> -#include <asm/mach/irq.h> -#include <asm/exception.h> - -#include "generic.h" - - -/* - * We don't need to ACK IRQs on the SA1100 unless they're GPIOs - * this is for internal IRQs i.e. from IRQ LCD to RTCAlrm. - */ -static void sa1100_mask_irq(struct irq_data *d) -{ - ICMR &= ~BIT(d->hwirq); -} - -static void sa1100_unmask_irq(struct irq_data *d) -{ - ICMR |= BIT(d->hwirq); -} - -/* - * Apart form GPIOs, only the RTC alarm can be a wakeup event. - */ -static int sa1100_set_wake(struct irq_data *d, unsigned int on) -{ - if (BIT(d->hwirq) == IC_RTCAlrm) { - if (on) - PWER |= PWER_RTC; - else - PWER &= ~PWER_RTC; - return 0; - } - return -EINVAL; -} - -static struct irq_chip sa1100_normal_chip = { - .name = "SC", - .irq_ack = sa1100_mask_irq, - .irq_mask = sa1100_mask_irq, - .irq_unmask = sa1100_unmask_irq, - .irq_set_wake = sa1100_set_wake, -}; - -static int sa1100_normal_irqdomain_map(struct irq_domain *d, - unsigned int irq, irq_hw_number_t hwirq) -{ - irq_set_chip_and_handler(irq, &sa1100_normal_chip, - handle_level_irq); - set_irq_flags(irq, IRQF_VALID); - - return 0; -} - -static struct irq_domain_ops sa1100_normal_irqdomain_ops = { - .map = sa1100_normal_irqdomain_map, - .xlate = irq_domain_xlate_onetwocell, -}; - -static struct irq_domain *sa1100_normal_irqdomain; - -static struct resource irq_resource = - DEFINE_RES_MEM_NAMED(0x90050000, SZ_64K, "irqs"); - -static struct sa1100irq_state { - unsigned int saved; - unsigned int icmr; - unsigned int iclr; - unsigned int iccr; -} sa1100irq_state; - -static int sa1100irq_suspend(void) -{ - struct sa1100irq_state *st = &sa1100irq_state; - - st->saved = 1; - st->icmr = ICMR; - st->iclr = ICLR; - st->iccr = ICCR; - - /* - * Disable all GPIO-based interrupts. - */ - ICMR &= ~(IC_GPIO11_27|IC_GPIO10|IC_GPIO9|IC_GPIO8|IC_GPIO7| - IC_GPIO6|IC_GPIO5|IC_GPIO4|IC_GPIO3|IC_GPIO2| - IC_GPIO1|IC_GPIO0); - - return 0; -} - -static void sa1100irq_resume(void) -{ - struct sa1100irq_state *st = &sa1100irq_state; - - if (st->saved) { - ICCR = st->iccr; - ICLR = st->iclr; - - ICMR = st->icmr; - } -} - -static struct syscore_ops sa1100irq_syscore_ops = { - .suspend = sa1100irq_suspend, - .resume = sa1100irq_resume, -}; - -static int __init sa1100irq_init_devicefs(void) -{ - register_syscore_ops(&sa1100irq_syscore_ops); - return 0; -} - -device_initcall(sa1100irq_init_devicefs); - -static asmlinkage void __exception_irq_entry -sa1100_handle_irq(struct pt_regs *regs) -{ - uint32_t icip, icmr, mask; - - do { - icip = (ICIP); - icmr = (ICMR); - mask = icip & icmr; - - if (mask == 0) - break; - - handle_domain_irq(sa1100_normal_irqdomain, - ffs(mask) - 1, regs); - } while (1); -} - -void __init sa1100_init_irq(void) -{ - request_resource(&iomem_resource, &irq_resource); - - /* disable all IRQs */ - ICMR = 0; - - /* all IRQs are IRQ, not FIQ */ - ICLR = 0; - - /* - * Whatever the doc says, this has to be set for the wait-on-irq - * instruction to work... on a SA1100 rev 9 at least. - */ - ICCR = 1; - - sa1100_normal_irqdomain = irq_domain_add_simple(NULL, - 32, IRQ_GPIO0_SC, - &sa1100_normal_irqdomain_ops, NULL); - - set_handle_irq(sa1100_handle_irq); - - sa1100_init_gpio(); -} diff --git a/arch/arm/mach-sa1100/neponset.c b/arch/arm/mach-sa1100/neponset.c index af868d258..99d9a3b1b 100644 --- a/arch/arm/mach-sa1100/neponset.c +++ b/arch/arm/mach-sa1100/neponset.c @@ -327,8 +327,7 @@ static int neponset_probe(struct platform_device *dev) irq_set_chip(d->irq_base + NEP_IRQ_SA1111, &nochip); irq_set_irq_type(irq, IRQ_TYPE_EDGE_RISING); - irq_set_handler_data(irq, d); - irq_set_chained_handler(irq, neponset_irq_handler); + irq_set_chained_handler_and_data(irq, neponset_irq_handler, d); /* * We would set IRQ_GPIO25 to be a wake-up IRQ, but unfortunately diff --git a/arch/arm/mach-shmobile/Kconfig b/arch/arm/mach-shmobile/Kconfig index 0fb484221..45006479d 100644 --- a/arch/arm/mach-shmobile/Kconfig +++ b/arch/arm/mach-shmobile/Kconfig @@ -139,7 +139,7 @@ config MACH_ARMADILLO800EVA select ARCH_REQUIRE_GPIOLIB select REGULATOR_FIXED_VOLTAGE if REGULATOR select SMSC_PHY if SH_ETH - select SND_SOC_WM8978 if SND_SIMPLE_CARD + select SND_SOC_WM8978 if SND_SIMPLE_CARD && I2C select USE_OF config MACH_BOCKW @@ -148,7 +148,7 @@ config MACH_BOCKW select ARCH_REQUIRE_GPIOLIB select REGULATOR_FIXED_VOLTAGE if REGULATOR select SND_SOC_AK4554 if SND_SIMPLE_CARD - select SND_SOC_AK4642 if SND_SIMPLE_CARD + select SND_SOC_AK4642 if SND_SIMPLE_CARD && I2C select USE_OF config MACH_BOCKW_REFERENCE diff --git a/arch/arm/mach-shmobile/common.h b/arch/arm/mach-shmobile/common.h index afc60bad6..476092b86 100644 --- a/arch/arm/mach-shmobile/common.h +++ b/arch/arm/mach-shmobile/common.h @@ -14,7 +14,6 @@ extern void shmobile_smp_sleep(void); extern void shmobile_smp_hook(unsigned int cpu, unsigned long fn, unsigned long arg); extern int shmobile_smp_cpu_disable(unsigned int cpu); -extern void shmobile_invalidate_start(void); extern void shmobile_boot_scu(void); extern void shmobile_smp_scu_prepare_cpus(unsigned int max_cpus); extern void shmobile_smp_scu_cpu_die(unsigned int cpu); diff --git a/arch/arm/mach-shmobile/headsmp-scu.S b/arch/arm/mach-shmobile/headsmp-scu.S index 69df8bfac..fa5248c52 100644 --- a/arch/arm/mach-shmobile/headsmp-scu.S +++ b/arch/arm/mach-shmobile/headsmp-scu.S @@ -22,7 +22,7 @@ * Boot code for secondary CPUs. * * First we turn on L1 cache coherency for our CPU. Then we jump to - * shmobile_invalidate_start that invalidates the cache and hands over control + * secondary_startup that invalidates the cache and hands over control * to the common ARM startup code. */ ENTRY(shmobile_boot_scu) @@ -36,7 +36,7 @@ ENTRY(shmobile_boot_scu) bic r2, r2, r3 @ Clear bits of our CPU (Run Mode) str r2, [r0, #8] @ write back - b shmobile_invalidate_start + b secondary_startup ENDPROC(shmobile_boot_scu) .text diff --git a/arch/arm/mach-shmobile/headsmp.S b/arch/arm/mach-shmobile/headsmp.S index 50c491567..330c1fc63 100644 --- a/arch/arm/mach-shmobile/headsmp.S +++ b/arch/arm/mach-shmobile/headsmp.S @@ -16,13 +16,6 @@ #include <asm/assembler.h> #include <asm/memory.h> -#ifdef CONFIG_SMP -ENTRY(shmobile_invalidate_start) - bl v7_invalidate_l1 - b secondary_startup -ENDPROC(shmobile_invalidate_start) -#endif - /* * Reset vector for secondary CPUs. * This will be mapped at address 0 by SBAR register. diff --git a/arch/arm/mach-shmobile/platsmp-apmu.c b/arch/arm/mach-shmobile/platsmp-apmu.c index f483b560b..b0790fc32 100644 --- a/arch/arm/mach-shmobile/platsmp-apmu.c +++ b/arch/arm/mach-shmobile/platsmp-apmu.c @@ -133,7 +133,7 @@ void __init shmobile_smp_apmu_prepare_cpus(unsigned int max_cpus, int shmobile_smp_apmu_boot_secondary(unsigned int cpu, struct task_struct *idle) { /* For this particular CPU register boot vector */ - shmobile_smp_hook(cpu, virt_to_phys(shmobile_invalidate_start), 0); + shmobile_smp_hook(cpu, virt_to_phys(secondary_startup), 0); return apmu_wrap(cpu, apmu_power_on); } diff --git a/arch/arm/mach-shmobile/setup-r8a7740.c b/arch/arm/mach-shmobile/setup-r8a7740.c index 9832e4839..00291cc17 100644 --- a/arch/arm/mach-shmobile/setup-r8a7740.c +++ b/arch/arm/mach-shmobile/setup-r8a7740.c @@ -13,7 +13,6 @@ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. */ -#include <linux/delay.h> #include <linux/dma-mapping.h> #include <linux/kernel.h> #include <linux/init.h> @@ -690,56 +689,6 @@ void __init r8a7740_meram_workaround(void) } } -#define ICCR 0x0004 -#define ICSTART 0x0070 - -#define i2c_read(reg, offset) ioread8(reg + offset) -#define i2c_write(reg, offset, data) iowrite8(data, reg + offset) - -/* - * r8a7740 chip has lasting errata on I2C I/O pad reset. - * this is work-around for it. - */ -static void r8a7740_i2c_workaround(struct platform_device *pdev) -{ - struct resource *res; - void __iomem *reg; - - res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - if (unlikely(!res)) { - pr_err("r8a7740 i2c workaround fail (cannot find resource)\n"); - return; - } - - reg = ioremap(res->start, resource_size(res)); - if (unlikely(!reg)) { - pr_err("r8a7740 i2c workaround fail (cannot map IO)\n"); - return; - } - - i2c_write(reg, ICCR, i2c_read(reg, ICCR) | 0x80); - i2c_read(reg, ICCR); /* dummy read */ - - i2c_write(reg, ICSTART, i2c_read(reg, ICSTART) | 0x10); - i2c_read(reg, ICSTART); /* dummy read */ - - udelay(10); - - i2c_write(reg, ICCR, 0x01); - i2c_write(reg, ICSTART, 0x00); - - udelay(10); - - i2c_write(reg, ICCR, 0x10); - udelay(10); - i2c_write(reg, ICCR, 0x00); - udelay(10); - i2c_write(reg, ICCR, 0x10); - udelay(10); - - iounmap(reg); -} - void __init r8a7740_add_standard_devices(void) { static struct pm_domain_device domain_devices[] __initdata = { @@ -766,10 +715,6 @@ void __init r8a7740_add_standard_devices(void) { "A3SP", &usb_dma_device }, }; - /* I2C work-around */ - r8a7740_i2c_workaround(&i2c0_device); - r8a7740_i2c_workaround(&i2c1_device); - r8a7740_init_pm_domains(); /* add devices */ diff --git a/arch/arm/mach-socfpga/Kconfig b/arch/arm/mach-socfpga/Kconfig index b5f8d75d5..90efdeb56 100644 --- a/arch/arm/mach-socfpga/Kconfig +++ b/arch/arm/mach-socfpga/Kconfig @@ -1,5 +1,6 @@ -config ARCH_SOCFPGA +menuconfig ARCH_SOCFPGA bool "Altera SOCFPGA family" if ARCH_MULTI_V7 + select ARCH_SUPPORTS_BIG_ENDIAN select ARM_AMBA select ARM_GIC select CACHE_L2X0 @@ -8,3 +9,11 @@ config ARCH_SOCFPGA select HAVE_ARM_SCU select HAVE_ARM_TWD if SMP select MFD_SYSCON + +if ARCH_SOCFPGA +config SOCFPGA_SUSPEND + bool "Suspend to RAM on SOCFPGA" + help + Select this if you want to enable Suspend-to-RAM on SOCFPGA + platforms. +endif diff --git a/arch/arm/mach-socfpga/Makefile b/arch/arm/mach-socfpga/Makefile index 6dd7a93a9..b8f9e238e 100644 --- a/arch/arm/mach-socfpga/Makefile +++ b/arch/arm/mach-socfpga/Makefile @@ -4,3 +4,4 @@ obj-y := socfpga.o obj-$(CONFIG_SMP) += headsmp.o platsmp.o +obj-$(CONFIG_SOCFPGA_SUSPEND) += pm.o self-refresh.o diff --git a/arch/arm/mach-socfpga/core.h b/arch/arm/mach-socfpga/core.h index a0f3b1cd4..7259c3732 100644 --- a/arch/arm/mach-socfpga/core.h +++ b/arch/arm/mach-socfpga/core.h @@ -1,6 +1,6 @@ /* * Copyright 2012 Pavel Machek <pavel@denx.de> - * Copyright (C) 2012 Altera Corporation + * Copyright (C) 2012-2015 Altera Corporation * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -25,22 +25,24 @@ #define SOCFPGA_RSTMGR_MODPERRST 0x14 #define SOCFPGA_RSTMGR_BRGMODRST 0x1c +#define SOCFPGA_A10_RSTMGR_MODMPURST 0x20 + /* System Manager bits */ #define RSTMGR_CTRL_SWCOLDRSTREQ 0x1 /* Cold Reset */ #define RSTMGR_CTRL_SWWARMRSTREQ 0x2 /* Warm Reset */ #define RSTMGR_MPUMODRST_CPU1 0x2 /* CPU1 Reset */ -extern void socfpga_secondary_startup(void); -extern void __iomem *socfpga_scu_base_addr; - extern void socfpga_init_clocks(void); extern void socfpga_sysmgr_init(void); extern void __iomem *sys_manager_base_addr; extern void __iomem *rst_manager_base_addr; +extern void __iomem *sdr_ctl_base_addr; + +u32 socfpga_sdram_self_refresh(u32 sdr_base); +extern unsigned int socfpga_sdram_self_refresh_sz; -extern struct smp_operations socfpga_smp_ops; extern char secondary_trampoline, secondary_trampoline_end; extern unsigned long socfpga_cpu1start_addr; diff --git a/arch/arm/mach-socfpga/headsmp.S b/arch/arm/mach-socfpga/headsmp.S index f65ea0af4..5d94b7a2f 100644 --- a/arch/arm/mach-socfpga/headsmp.S +++ b/arch/arm/mach-socfpga/headsmp.S @@ -10,6 +10,7 @@ #include <linux/linkage.h> #include <linux/init.h> #include <asm/memory.h> +#include <asm/assembler.h> .arch armv7-a @@ -18,20 +19,17 @@ ENTRY(secondary_trampoline) * Thus, we can just subtract the PAGE_OFFSET to get the physical * address of &cpu1start_addr. This would not work for platforms * where the physical memory does not start at 0x0. - */ + */ +ARM_BE8(setend be) adr r0, 1f ldmia r0, {r1, r2} sub r2, r2, #PAGE_OFFSET ldr r3, [r2] ldr r4, [r3] +ARM_BE8(rev r4, r4) bx r4 .align 1: .long . .long socfpga_cpu1start_addr ENTRY(secondary_trampoline_end) - -ENTRY(socfpga_secondary_startup) - bl v7_invalidate_l1 - b secondary_startup -ENDPROC(socfpga_secondary_startup) diff --git a/arch/arm/mach-socfpga/platsmp.c b/arch/arm/mach-socfpga/platsmp.c index c64d89b7c..c6f1df89f 100644 --- a/arch/arm/mach-socfpga/platsmp.c +++ b/arch/arm/mach-socfpga/platsmp.c @@ -40,7 +40,7 @@ static int socfpga_boot_secondary(unsigned int cpu, struct task_struct *idle) memcpy(phys_to_virt(0), &secondary_trampoline, trampoline_size); - writel(virt_to_phys(socfpga_secondary_startup), + writel(virt_to_phys(secondary_startup), sys_manager_base_addr + (socfpga_cpu1start_addr & 0x000000ff)); flush_cache_all(); @@ -54,32 +54,43 @@ static int socfpga_boot_secondary(unsigned int cpu, struct task_struct *idle) return 0; } -/* - * Initialise the CPU possible map early - this describes the CPUs - * which may be present or become present in the system. - */ -static void __init socfpga_smp_init_cpus(void) +static int socfpga_a10_boot_secondary(unsigned int cpu, struct task_struct *idle) { - unsigned int i, ncores; + int trampoline_size = &secondary_trampoline_end - &secondary_trampoline; - ncores = scu_get_core_count(socfpga_scu_base_addr); + if (socfpga_cpu1start_addr) { + writel(RSTMGR_MPUMODRST_CPU1, rst_manager_base_addr + + SOCFPGA_A10_RSTMGR_MODMPURST); + memcpy(phys_to_virt(0), &secondary_trampoline, trampoline_size); - for (i = 0; i < ncores; i++) - set_cpu_possible(i, true); + writel(virt_to_phys(secondary_startup), + sys_manager_base_addr + (socfpga_cpu1start_addr & 0x00000fff)); - /* sanity check */ - if (ncores > num_possible_cpus()) { - pr_warn("socfpga: no. of cores (%d) greater than configured" - "maximum of %d - clipping\n", ncores, num_possible_cpus()); - ncores = num_possible_cpus(); + flush_cache_all(); + smp_wmb(); + outer_clean_range(0, trampoline_size); + + /* This will release CPU #1 out of reset. */ + writel(0, rst_manager_base_addr + SOCFPGA_A10_RSTMGR_MODMPURST); } - for (i = 0; i < ncores; i++) - set_cpu_possible(i, true); + return 0; } static void __init socfpga_smp_prepare_cpus(unsigned int max_cpus) { + struct device_node *np; + void __iomem *socfpga_scu_base_addr; + + np = of_find_compatible_node(NULL, NULL, "arm,cortex-a9-scu"); + if (!np) { + pr_err("%s: missing scu\n", __func__); + return; + } + + socfpga_scu_base_addr = of_iomap(np, 0); + if (!socfpga_scu_base_addr) + return; scu_enable(socfpga_scu_base_addr); } @@ -95,11 +106,21 @@ static void socfpga_cpu_die(unsigned int cpu) cpu_do_idle(); } -struct smp_operations socfpga_smp_ops __initdata = { - .smp_init_cpus = socfpga_smp_init_cpus, +static struct smp_operations socfpga_smp_ops __initdata = { .smp_prepare_cpus = socfpga_smp_prepare_cpus, .smp_boot_secondary = socfpga_boot_secondary, #ifdef CONFIG_HOTPLUG_CPU .cpu_die = socfpga_cpu_die, #endif }; + +static struct smp_operations socfpga_a10_smp_ops __initdata = { + .smp_prepare_cpus = socfpga_smp_prepare_cpus, + .smp_boot_secondary = socfpga_a10_boot_secondary, +#ifdef CONFIG_HOTPLUG_CPU + .cpu_die = socfpga_cpu_die, +#endif +}; + +CPU_METHOD_OF_DECLARE(socfpga_smp, "altr,socfpga-smp", &socfpga_smp_ops); +CPU_METHOD_OF_DECLARE(socfpga_a10_smp, "altr,socfpga-a10-smp", &socfpga_a10_smp_ops); diff --git a/arch/arm/mach-socfpga/pm.c b/arch/arm/mach-socfpga/pm.c new file mode 100644 index 000000000..6a4199f2b --- /dev/null +++ b/arch/arm/mach-socfpga/pm.c @@ -0,0 +1,149 @@ +/* + * arch/arm/mach-socfpga/pm.c + * + * Copyright (C) 2014-2015 Altera Corporation. All rights reserved. + * + * with code from pm-imx6.c + * Copyright 2011-2014 Freescale Semiconductor, Inc. + * Copyright 2011 Linaro Ltd. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#include <linux/bitops.h> +#include <linux/genalloc.h> +#include <linux/init.h> +#include <linux/io.h> +#include <linux/of_platform.h> +#include <linux/suspend.h> +#include <asm/suspend.h> +#include <asm/fncpy.h> +#include "core.h" + +/* Pointer to function copied to ocram */ +static u32 (*socfpga_sdram_self_refresh_in_ocram)(u32 sdr_base); + +static int socfpga_setup_ocram_self_refresh(void) +{ + struct platform_device *pdev; + phys_addr_t ocram_pbase; + struct device_node *np; + struct gen_pool *ocram_pool; + unsigned long ocram_base; + void __iomem *suspend_ocram_base; + int ret = 0; + + np = of_find_compatible_node(NULL, NULL, "mmio-sram"); + if (!np) { + pr_err("%s: Unable to find mmio-sram in dtb\n", __func__); + return -ENODEV; + } + + pdev = of_find_device_by_node(np); + if (!pdev) { + pr_warn("%s: failed to find ocram device!\n", __func__); + ret = -ENODEV; + goto put_node; + } + + ocram_pool = gen_pool_get(&pdev->dev); + if (!ocram_pool) { + pr_warn("%s: ocram pool unavailable!\n", __func__); + ret = -ENODEV; + goto put_node; + } + + ocram_base = gen_pool_alloc(ocram_pool, socfpga_sdram_self_refresh_sz); + if (!ocram_base) { + pr_warn("%s: unable to alloc ocram!\n", __func__); + ret = -ENOMEM; + goto put_node; + } + + ocram_pbase = gen_pool_virt_to_phys(ocram_pool, ocram_base); + + suspend_ocram_base = __arm_ioremap_exec(ocram_pbase, + socfpga_sdram_self_refresh_sz, + false); + if (!suspend_ocram_base) { + pr_warn("%s: __arm_ioremap_exec failed!\n", __func__); + ret = -ENOMEM; + goto put_node; + } + + /* Copy the code that puts DDR in self refresh to ocram */ + socfpga_sdram_self_refresh_in_ocram = + (void *)fncpy(suspend_ocram_base, + &socfpga_sdram_self_refresh, + socfpga_sdram_self_refresh_sz); + + WARN(!socfpga_sdram_self_refresh_in_ocram, + "could not copy function to ocram"); + if (!socfpga_sdram_self_refresh_in_ocram) + ret = -EFAULT; + +put_node: + of_node_put(np); + + return ret; +} + +static int socfpga_pm_suspend(unsigned long arg) +{ + u32 ret; + + if (!sdr_ctl_base_addr) + return -EFAULT; + + ret = socfpga_sdram_self_refresh_in_ocram((u32)sdr_ctl_base_addr); + + pr_debug("%s self-refresh loops request=%d exit=%d\n", __func__, + ret & 0xffff, (ret >> 16) & 0xffff); + + return 0; +} + +static int socfpga_pm_enter(suspend_state_t state) +{ + switch (state) { + case PM_SUSPEND_STANDBY: + case PM_SUSPEND_MEM: + outer_disable(); + cpu_suspend(0, socfpga_pm_suspend); + outer_resume(); + break; + default: + return -EINVAL; + } + return 0; +} + +static const struct platform_suspend_ops socfpga_pm_ops = { + .valid = suspend_valid_only_mem, + .enter = socfpga_pm_enter, +}; + +static int __init socfpga_pm_init(void) +{ + int ret; + + ret = socfpga_setup_ocram_self_refresh(); + if (ret) + return ret; + + suspend_set_ops(&socfpga_pm_ops); + pr_info("SoCFPGA initialized for DDR self-refresh during suspend.\n"); + + return 0; +} +arch_initcall(socfpga_pm_init); diff --git a/arch/arm/mach-socfpga/self-refresh.S b/arch/arm/mach-socfpga/self-refresh.S new file mode 100644 index 000000000..f2d7f883e --- /dev/null +++ b/arch/arm/mach-socfpga/self-refresh.S @@ -0,0 +1,136 @@ +/* + * Copyright (C) 2014-2015 Altera Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program. If not, see <http://www.gnu.org/licenses/>. + */ +#include <linux/linkage.h> +#include <asm/assembler.h> + +#define MAX_LOOP_COUNT 1000 + +/* Register offset */ +#define SDR_CTRLGRP_LOWPWREQ_ADDR 0x54 +#define SDR_CTRLGRP_LOWPWRACK_ADDR 0x58 + +/* Bitfield positions */ +#define SELFRSHREQ_POS 3 +#define SELFRSHREQ_MASK 0x8 + +#define SELFRFSHACK_POS 1 +#define SELFRFSHACK_MASK 0x2 + + /* + * This code assumes that when the bootloader configured + * the sdram controller for the DDR on the board it + * configured the following fields depending on the DDR + * vendor/configuration: + * + * sdr.ctrlcfg.lowpwreq.selfrfshmask + * sdr.ctrlcfg.lowpwrtiming.clkdisablecycles + * sdr.ctrlcfg.dramtiming4.selfrfshexit + */ + + .arch armv7-a + .text + .align 3 + + /* + * socfpga_sdram_self_refresh + * + * r0 : sdr_ctl_base_addr + * r1 : temp storage of return value + * r2 : temp storage of register values + * r3 : loop counter + * + * return value: lower 16 bits: loop count going into self refresh + * upper 16 bits: loop count exiting self refresh + */ +ENTRY(socfpga_sdram_self_refresh) + /* Enable dynamic clock gating in the Power Control Register. */ + mrc p15, 0, r2, c15, c0, 0 + orr r2, r2, #1 + mcr p15, 0, r2, c15, c0, 0 + + /* Enable self refresh: set sdr.ctrlgrp.lowpwreq.selfrshreq = 1 */ + ldr r2, [r0, #SDR_CTRLGRP_LOWPWREQ_ADDR] + orr r2, r2, #SELFRSHREQ_MASK + str r2, [r0, #SDR_CTRLGRP_LOWPWREQ_ADDR] + + /* Poll until sdr.ctrlgrp.lowpwrack.selfrfshack == 1 or hit max loops */ + mov r3, #0 +while_ack_0: + ldr r2, [r0, #SDR_CTRLGRP_LOWPWRACK_ADDR] + and r2, r2, #SELFRFSHACK_MASK + cmp r2, #SELFRFSHACK_MASK + beq ack_1 + + add r3, #1 + cmp r3, #MAX_LOOP_COUNT + bne while_ack_0 + +ack_1: + mov r1, r3 + + /* + * Execute an ISB instruction to ensure that all of the + * CP15 register changes have been committed. + */ + isb + + /* + * Execute a barrier instruction to ensure that all cache, + * TLB and branch predictor maintenance operations issued + * by any CPU in the cluster have completed. + */ + dsb + dmb + + wfi + + /* Disable self-refresh: set sdr.ctrlgrp.lowpwreq.selfrshreq = 0 */ + ldr r2, [r0, #SDR_CTRLGRP_LOWPWREQ_ADDR] + bic r2, r2, #SELFRSHREQ_MASK + str r2, [r0, #SDR_CTRLGRP_LOWPWREQ_ADDR] + + /* Poll until sdr.ctrlgrp.lowpwrack.selfrfshack == 0 or hit max loops */ + mov r3, #0 +while_ack_1: + ldr r2, [r0, #SDR_CTRLGRP_LOWPWRACK_ADDR] + and r2, r2, #SELFRFSHACK_MASK + cmp r2, #SELFRFSHACK_MASK + bne ack_0 + + add r3, #1 + cmp r3, #MAX_LOOP_COUNT + bne while_ack_1 + +ack_0: + /* + * Prepare return value: + * Shift loop count for exiting self refresh into upper 16 bits. + * Leave loop count for requesting self refresh in lower 16 bits. + */ + mov r3, r3, lsl #16 + add r1, r1, r3 + + /* Disable dynamic clock gating in the Power Control Register. */ + mrc p15, 0, r2, c15, c0, 0 + bic r2, r2, #1 + mcr p15, 0, r2, c15, c0, 0 + + mov r0, r1 @ return value + bx lr @ return + +ENDPROC(socfpga_sdram_self_refresh) +ENTRY(socfpga_sdram_self_refresh_sz) + .word . - socfpga_sdram_self_refresh diff --git a/arch/arm/mach-socfpga/socfpga.c b/arch/arm/mach-socfpga/socfpga.c index f5e597c20..19643a756 100644 --- a/arch/arm/mach-socfpga/socfpga.c +++ b/arch/arm/mach-socfpga/socfpga.c @@ -1,5 +1,5 @@ /* - * Copyright (C) 2012 Altera Corporation + * Copyright (C) 2012-2015 Altera Corporation * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -27,43 +27,11 @@ #include "core.h" -void __iomem *socfpga_scu_base_addr = ((void __iomem *)(SOCFPGA_SCU_VIRT_BASE)); void __iomem *sys_manager_base_addr; void __iomem *rst_manager_base_addr; +void __iomem *sdr_ctl_base_addr; unsigned long socfpga_cpu1start_addr; -static struct map_desc scu_io_desc __initdata = { - .virtual = SOCFPGA_SCU_VIRT_BASE, - .pfn = 0, /* run-time */ - .length = SZ_8K, - .type = MT_DEVICE, -}; - -static struct map_desc uart_io_desc __initdata = { - .virtual = 0xfec02000, - .pfn = __phys_to_pfn(0xffc02000), - .length = SZ_8K, - .type = MT_DEVICE, -}; - -static void __init socfpga_scu_map_io(void) -{ - unsigned long base; - - /* Get SCU base */ - asm("mrc p15, 4, %0, c15, c0, 0" : "=r" (base)); - - scu_io_desc.pfn = __phys_to_pfn(base); - iotable_init(&scu_io_desc, 1); -} - -static void __init socfpga_map_io(void) -{ - socfpga_scu_map_io(); - iotable_init(&uart_io_desc, 1); - early_printk("Early printk initialized\n"); -} - void __init socfpga_sysmgr_init(void) { struct device_node *np; @@ -82,6 +50,9 @@ void __init socfpga_sysmgr_init(void) np = of_find_compatible_node(NULL, NULL, "altr,rst-mgr"); rst_manager_base_addr = of_iomap(np, 0); + + np = of_find_compatible_node(NULL, NULL, "altr,sdr-ctl"); + sdr_ctl_base_addr = of_iomap(np, 0); } static void __init socfpga_init_irq(void) @@ -111,8 +82,6 @@ static const char *altera_dt_match[] = { DT_MACHINE_START(SOCFPGA, "Altera SOCFPGA") .l2c_aux_val = 0, .l2c_aux_mask = ~0, - .smp = smp_ops(socfpga_smp_ops), - .map_io = socfpga_map_io, .init_irq = socfpga_init_irq, .restart = socfpga_cyclone5_restart, .dt_compat = altera_dt_match, diff --git a/arch/arm/mach-spear/generic.h b/arch/arm/mach-spear/generic.h index a99d90a4d..06640914d 100644 --- a/arch/arm/mach-spear/generic.h +++ b/arch/arm/mach-spear/generic.h @@ -3,7 +3,7 @@ * * Copyright (C) 2009-2012 ST Microelectronics * Rajeev Kumar <rajeev-dlh.kumar@st.com> - * Viresh Kumar <viresh.linux@gmail.com> + * Viresh Kumar <vireshk@kernel.org> * * This file is licensed under the terms of the GNU General Public * License version 2. This program is licensed "as is" without any diff --git a/arch/arm/mach-spear/include/mach/irqs.h b/arch/arm/mach-spear/include/mach/irqs.h index 92da0a8c6..7058720c5 100644 --- a/arch/arm/mach-spear/include/mach/irqs.h +++ b/arch/arm/mach-spear/include/mach/irqs.h @@ -3,7 +3,7 @@ * * Copyright (C) 2009-2012 ST Microelectronics * Rajeev Kumar <rajeev-dlh.kumar@st.com> - * Viresh Kumar <viresh.linux@gmail.com> + * Viresh Kumar <vireshk@kernel.org> * * This file is licensed under the terms of the GNU General Public * License version 2. This program is licensed "as is" without any diff --git a/arch/arm/mach-spear/include/mach/misc_regs.h b/arch/arm/mach-spear/include/mach/misc_regs.h index 935639ce5..cfaf7c665 100644 --- a/arch/arm/mach-spear/include/mach/misc_regs.h +++ b/arch/arm/mach-spear/include/mach/misc_regs.h @@ -4,7 +4,7 @@ * Miscellaneous registers definitions for SPEAr3xx machine family * * Copyright (C) 2009 ST Microelectronics - * Viresh Kumar <viresh.linux@gmail.com> + * Viresh Kumar <vireshk@kernel.org> * * This file is licensed under the terms of the GNU General Public * License version 2. This program is licensed "as is" without any diff --git a/arch/arm/mach-spear/include/mach/spear.h b/arch/arm/mach-spear/include/mach/spear.h index f2d6a0176..5ed841ccf 100644 --- a/arch/arm/mach-spear/include/mach/spear.h +++ b/arch/arm/mach-spear/include/mach/spear.h @@ -3,7 +3,7 @@ * * Copyright (C) 2009,2012 ST Microelectronics * Rajeev Kumar<rajeev-dlh.kumar@st.com> - * Viresh Kumar <viresh.linux@gmail.com> + * Viresh Kumar <vireshk@kernel.org> * * This file is licensed under the terms of the GNU General Public * License version 2. This program is licensed "as is" without any diff --git a/arch/arm/mach-spear/include/mach/uncompress.h b/arch/arm/mach-spear/include/mach/uncompress.h index 51b2dc93e..8439b9c12 100644 --- a/arch/arm/mach-spear/include/mach/uncompress.h +++ b/arch/arm/mach-spear/include/mach/uncompress.h @@ -4,7 +4,7 @@ * Serial port stubs for kernel decompress status messages * * Copyright (C) 2009 ST Microelectronics - * Viresh Kumar <viresh.linux@gmail.com> + * Viresh Kumar <vireshk@kernel.org> * * This file is licensed under the terms of the GNU General Public * License version 2. This program is licensed "as is" without any diff --git a/arch/arm/mach-spear/pl080.c b/arch/arm/mach-spear/pl080.c index cfa1199d0..b4529f3e0 100644 --- a/arch/arm/mach-spear/pl080.c +++ b/arch/arm/mach-spear/pl080.c @@ -4,7 +4,7 @@ * DMAC pl080 definitions for SPEAr platform * * Copyright (C) 2012 ST Microelectronics - * Viresh Kumar <viresh.linux@gmail.com> + * Viresh Kumar <vireshk@kernel.org> * * This file is licensed under the terms of the GNU General Public * License version 2. This program is licensed "as is" without any diff --git a/arch/arm/mach-spear/pl080.h b/arch/arm/mach-spear/pl080.h index eb6590ded..608dec672 100644 --- a/arch/arm/mach-spear/pl080.h +++ b/arch/arm/mach-spear/pl080.h @@ -4,7 +4,7 @@ * DMAC pl080 definitions for SPEAr platform * * Copyright (C) 2012 ST Microelectronics - * Viresh Kumar <viresh.linux@gmail.com> + * Viresh Kumar <vireshk@kernel.org> * * This file is licensed under the terms of the GNU General Public * License version 2. This program is licensed "as is" without any diff --git a/arch/arm/mach-spear/restart.c b/arch/arm/mach-spear/restart.c index ce5e098c4..b4342155a 100644 --- a/arch/arm/mach-spear/restart.c +++ b/arch/arm/mach-spear/restart.c @@ -4,7 +4,7 @@ * SPEAr platform specific restart functions * * Copyright (C) 2009 ST Microelectronics - * Viresh Kumar <viresh.linux@gmail.com> + * Viresh Kumar <vireshk@kernel.org> * * This file is licensed under the terms of the GNU General Public * License version 2. This program is licensed "as is" without any diff --git a/arch/arm/mach-spear/spear1310.c b/arch/arm/mach-spear/spear1310.c index d9ce4d800..cd5d375d9 100644 --- a/arch/arm/mach-spear/spear1310.c +++ b/arch/arm/mach-spear/spear1310.c @@ -4,7 +4,7 @@ * SPEAr1310 machine source file * * Copyright (C) 2012 ST Microelectronics - * Viresh Kumar <viresh.linux@gmail.com> + * Viresh Kumar <vireshk@kernel.org> * * This file is licensed under the terms of the GNU General Public * License version 2. This program is licensed "as is" without any diff --git a/arch/arm/mach-spear/spear1340.c b/arch/arm/mach-spear/spear1340.c index 3f3c0f124..94594d5a4 100644 --- a/arch/arm/mach-spear/spear1340.c +++ b/arch/arm/mach-spear/spear1340.c @@ -4,7 +4,7 @@ * SPEAr1340 machine source file * * Copyright (C) 2012 ST Microelectronics - * Viresh Kumar <viresh.linux@gmail.com> + * Viresh Kumar <vireshk@kernel.org> * * This file is licensed under the terms of the GNU General Public * License version 2. This program is licensed "as is" without any diff --git a/arch/arm/mach-spear/spear13xx.c b/arch/arm/mach-spear/spear13xx.c index 2e463a934..b7afce679 100644 --- a/arch/arm/mach-spear/spear13xx.c +++ b/arch/arm/mach-spear/spear13xx.c @@ -4,7 +4,7 @@ * SPEAr13XX machines common source file * * Copyright (C) 2012 ST Microelectronics - * Viresh Kumar <viresh.linux@gmail.com> + * Viresh Kumar <vireshk@kernel.org> * * This file is licensed under the terms of the GNU General Public * License version 2. This program is licensed "as is" without any diff --git a/arch/arm/mach-spear/spear300.c b/arch/arm/mach-spear/spear300.c index b52e48f34..5b32edda2 100644 --- a/arch/arm/mach-spear/spear300.c +++ b/arch/arm/mach-spear/spear300.c @@ -4,7 +4,7 @@ * SPEAr300 machine source file * * Copyright (C) 2009-2012 ST Microelectronics - * Viresh Kumar <viresh.linux@gmail.com> + * Viresh Kumar <vireshk@kernel.org> * * This file is licensed under the terms of the GNU General Public * License version 2. This program is licensed "as is" without any diff --git a/arch/arm/mach-spear/spear310.c b/arch/arm/mach-spear/spear310.c index ed2029db3..86a44ac7f 100644 --- a/arch/arm/mach-spear/spear310.c +++ b/arch/arm/mach-spear/spear310.c @@ -4,7 +4,7 @@ * SPEAr310 machine source file * * Copyright (C) 2009-2012 ST Microelectronics - * Viresh Kumar <viresh.linux@gmail.com> + * Viresh Kumar <vireshk@kernel.org> * * This file is licensed under the terms of the GNU General Public * License version 2. This program is licensed "as is" without any diff --git a/arch/arm/mach-spear/spear320.c b/arch/arm/mach-spear/spear320.c index bf634b32a..d45d75192 100644 --- a/arch/arm/mach-spear/spear320.c +++ b/arch/arm/mach-spear/spear320.c @@ -4,7 +4,7 @@ * SPEAr320 machine source file * * Copyright (C) 2009-2012 ST Microelectronics - * Viresh Kumar <viresh.linux@gmail.com> + * Viresh Kumar <vireshk@kernel.org> * * This file is licensed under the terms of the GNU General Public * License version 2. This program is licensed "as is" without any diff --git a/arch/arm/mach-spear/spear3xx.c b/arch/arm/mach-spear/spear3xx.c index bf3b1fd8c..23394ac76 100644 --- a/arch/arm/mach-spear/spear3xx.c +++ b/arch/arm/mach-spear/spear3xx.c @@ -4,7 +4,7 @@ * SPEAr3XX machines common source file * * Copyright (C) 2009-2012 ST Microelectronics - * Viresh Kumar <viresh.linux@gmail.com> + * Viresh Kumar <vireshk@kernel.org> * * This file is licensed under the terms of the GNU General Public * License version 2. This program is licensed "as is" without any diff --git a/arch/arm/mach-sti/Kconfig b/arch/arm/mach-sti/Kconfig index 3b1ac463a..125865daa 100644 --- a/arch/arm/mach-sti/Kconfig +++ b/arch/arm/mach-sti/Kconfig @@ -1,6 +1,7 @@ menuconfig ARCH_STI bool "STMicroelectronics Consumer Electronics SOCs" if ARCH_MULTI_V7 select ARM_GIC + select ST_IRQCHIP select ARM_GLOBAL_TIMER select PINCTRL select PINCTRL_ST diff --git a/arch/arm/mach-stm32/Makefile b/arch/arm/mach-stm32/Makefile new file mode 100644 index 000000000..bd0b7b5d6 --- /dev/null +++ b/arch/arm/mach-stm32/Makefile @@ -0,0 +1 @@ +obj-y += board-dt.o diff --git a/arch/arm/mach-stm32/Makefile.boot b/arch/arm/mach-stm32/Makefile.boot new file mode 100644 index 000000000..eacfc3f5c --- /dev/null +++ b/arch/arm/mach-stm32/Makefile.boot @@ -0,0 +1,3 @@ +# Empty file waiting for deletion once Makefile.boot isn't needed any more. +# Patch waits for application at +# http://www.arm.linux.org.uk/developer/patches/viewpatch.php?id=7889/1 . diff --git a/arch/arm/mach-stm32/board-dt.c b/arch/arm/mach-stm32/board-dt.c new file mode 100644 index 000000000..f2ad7723d --- /dev/null +++ b/arch/arm/mach-stm32/board-dt.c @@ -0,0 +1,19 @@ +/* + * Copyright (C) Maxime Coquelin 2015 + * Author: Maxime Coquelin <mcoquelin.stm32@gmail.com> + * License terms: GNU General Public License (GPL), version 2 + */ + +#include <linux/kernel.h> +#include <asm/v7m.h> +#include <asm/mach/arch.h> + +static const char *const stm32_compat[] __initconst = { + "st,stm32f429", + NULL +}; + +DT_MACHINE_START(STM32DT, "STM32 (Device Tree Support)") + .dt_compat = stm32_compat, + .restart = armv7m_restart, +MACHINE_END diff --git a/arch/arm/mach-sunxi/Kconfig b/arch/arm/mach-sunxi/Kconfig index 81502b90d..4efe2d43a 100644 --- a/arch/arm/mach-sunxi/Kconfig +++ b/arch/arm/mach-sunxi/Kconfig @@ -35,7 +35,7 @@ config MACH_SUN7I select SUN5I_HSTIMER config MACH_SUN8I - bool "Allwinner A23 (sun8i) SoCs support" + bool "Allwinner sun8i Family SoCs support" default ARCH_SUNXI select ARM_GIC select MFD_SUN6I_PRCM diff --git a/arch/arm/mach-sunxi/platsmp.c b/arch/arm/mach-sunxi/platsmp.c index 587b0468e..e8483ec79 100644 --- a/arch/arm/mach-sunxi/platsmp.c +++ b/arch/arm/mach-sunxi/platsmp.c @@ -121,3 +121,72 @@ static struct smp_operations sun6i_smp_ops __initdata = { .smp_boot_secondary = sun6i_smp_boot_secondary, }; CPU_METHOD_OF_DECLARE(sun6i_a31_smp, "allwinner,sun6i-a31", &sun6i_smp_ops); + +static void __init sun8i_smp_prepare_cpus(unsigned int max_cpus) +{ + struct device_node *node; + + node = of_find_compatible_node(NULL, NULL, "allwinner,sun8i-a23-prcm"); + if (!node) { + pr_err("Missing A23 PRCM node in the device tree\n"); + return; + } + + prcm_membase = of_iomap(node, 0); + if (!prcm_membase) { + pr_err("Couldn't map A23 PRCM registers\n"); + return; + } + + node = of_find_compatible_node(NULL, NULL, + "allwinner,sun8i-a23-cpuconfig"); + if (!node) { + pr_err("Missing A23 CPU config node in the device tree\n"); + return; + } + + cpucfg_membase = of_iomap(node, 0); + if (!cpucfg_membase) + pr_err("Couldn't map A23 CPU config registers\n"); + +} + +static int sun8i_smp_boot_secondary(unsigned int cpu, + struct task_struct *idle) +{ + u32 reg; + + if (!(prcm_membase && cpucfg_membase)) + return -EFAULT; + + spin_lock(&cpu_lock); + + /* Set CPU boot address */ + writel(virt_to_phys(secondary_startup), + cpucfg_membase + CPUCFG_PRIVATE0_REG); + + /* Assert the CPU core in reset */ + writel(0, cpucfg_membase + CPUCFG_CPU_RST_CTRL_REG(cpu)); + + /* Assert the L1 cache in reset */ + reg = readl(cpucfg_membase + CPUCFG_GEN_CTRL_REG); + writel(reg & ~BIT(cpu), cpucfg_membase + CPUCFG_GEN_CTRL_REG); + + /* Clear CPU power-off gating */ + reg = readl(prcm_membase + PRCM_CPU_PWROFF_REG); + writel(reg & ~BIT(cpu), prcm_membase + PRCM_CPU_PWROFF_REG); + mdelay(1); + + /* Deassert the CPU core reset */ + writel(3, cpucfg_membase + CPUCFG_CPU_RST_CTRL_REG(cpu)); + + spin_unlock(&cpu_lock); + + return 0; +} + +struct smp_operations sun8i_smp_ops __initdata = { + .smp_prepare_cpus = sun8i_smp_prepare_cpus, + .smp_boot_secondary = sun8i_smp_boot_secondary, +}; +CPU_METHOD_OF_DECLARE(sun8i_a23_smp, "allwinner,sun8i-a23", &sun8i_smp_ops); diff --git a/arch/arm/mach-sunxi/sunxi.c b/arch/arm/mach-sunxi/sunxi.c index 1bc811a74..65bab2876 100644 --- a/arch/arm/mach-sunxi/sunxi.c +++ b/arch/arm/mach-sunxi/sunxi.c @@ -67,10 +67,13 @@ MACHINE_END static const char * const sun8i_board_dt_compat[] = { "allwinner,sun8i-a23", + "allwinner,sun8i-a33", + "allwinner,sun8i-h3", NULL, }; -DT_MACHINE_START(SUN8I_DT, "Allwinner sun8i (A23) Family") +DT_MACHINE_START(SUN8I_DT, "Allwinner sun8i Family") + .init_time = sun6i_timer_init, .dt_compat = sun8i_board_dt_compat, .init_late = sunxi_dt_cpufreq_init, MACHINE_END diff --git a/arch/arm/mach-tegra/Makefile b/arch/arm/mach-tegra/Makefile index e48a74458..fffad2426 100644 --- a/arch/arm/mach-tegra/Makefile +++ b/arch/arm/mach-tegra/Makefile @@ -19,7 +19,7 @@ obj-$(CONFIG_ARCH_TEGRA_3x_SOC) += pm-tegra30.o ifeq ($(CONFIG_CPU_IDLE),y) obj-$(CONFIG_ARCH_TEGRA_3x_SOC) += cpuidle-tegra30.o endif -obj-$(CONFIG_SMP) += platsmp.o headsmp.o +obj-$(CONFIG_SMP) += platsmp.o obj-$(CONFIG_HOTPLUG_CPU) += hotplug.o obj-$(CONFIG_ARCH_TEGRA_114_SOC) += sleep-tegra30.o diff --git a/arch/arm/mach-tegra/headsmp.S b/arch/arm/mach-tegra/headsmp.S deleted file mode 100644 index 2072e7322..000000000 --- a/arch/arm/mach-tegra/headsmp.S +++ /dev/null @@ -1,12 +0,0 @@ -#include <linux/linkage.h> -#include <linux/init.h> - -#include "sleep.h" - - .section ".text.head", "ax" - -ENTRY(tegra_secondary_startup) - check_cpu_part_num 0xc09, r8, r9 - bleq v7_invalidate_l1 - b secondary_startup -ENDPROC(tegra_secondary_startup) diff --git a/arch/arm/mach-tegra/reset.c b/arch/arm/mach-tegra/reset.c index 894c5c472..6fd9db548 100644 --- a/arch/arm/mach-tegra/reset.c +++ b/arch/arm/mach-tegra/reset.c @@ -94,7 +94,7 @@ void __init tegra_cpu_reset_handler_init(void) __tegra_cpu_reset_handler_data[TEGRA_RESET_MASK_PRESENT] = *((u32 *)cpu_possible_mask); __tegra_cpu_reset_handler_data[TEGRA_RESET_STARTUP_SECONDARY] = - virt_to_phys((void *)tegra_secondary_startup); + virt_to_phys((void *)secondary_startup); #endif #ifdef CONFIG_PM_SLEEP diff --git a/arch/arm/mach-tegra/reset.h b/arch/arm/mach-tegra/reset.h index 29c3dec01..9c479c792 100644 --- a/arch/arm/mach-tegra/reset.h +++ b/arch/arm/mach-tegra/reset.h @@ -37,7 +37,6 @@ void __tegra_cpu_reset_handler_start(void); void __tegra_cpu_reset_handler(void); void __tegra20_cpu1_resettable_status_offset(void); void __tegra_cpu_reset_handler_end(void); -void tegra_secondary_startup(void); #ifdef CONFIG_PM_SLEEP #define tegra_cpu_lp1_mask \ diff --git a/arch/arm/mach-tegra/sleep-tegra30.S b/arch/arm/mach-tegra/sleep-tegra30.S index 5d8d13aea..9a2f0b051 100644 --- a/arch/arm/mach-tegra/sleep-tegra30.S +++ b/arch/arm/mach-tegra/sleep-tegra30.S @@ -223,7 +223,7 @@ wfe_war: b __cpu_reset_again /* - * 38 nop's, which fills reset of wfe cache line and + * 38 nop's, which fills rest of wfe cache line and * 4 more cachelines with nop */ .rept 38 diff --git a/arch/arm/mach-tegra/tegra.c b/arch/arm/mach-tegra/tegra.c index 861d88486..2378fa560 100644 --- a/arch/arm/mach-tegra/tegra.c +++ b/arch/arm/mach-tegra/tegra.c @@ -163,6 +163,5 @@ DT_MACHINE_START(TEGRA_DT, "NVIDIA Tegra SoC (Flattened Device Tree)") .init_irq = tegra_dt_init_irq, .init_machine = tegra_dt_init, .init_late = tegra_dt_init_late, - .restart = tegra_pmc_restart, .dt_compat = tegra_dt_board_compat, MACHINE_END diff --git a/arch/arm/mach-uniphier/Kconfig b/arch/arm/mach-uniphier/Kconfig new file mode 100644 index 000000000..b640458fd --- /dev/null +++ b/arch/arm/mach-uniphier/Kconfig @@ -0,0 +1,11 @@ +config ARCH_UNIPHIER + bool "Socionext UniPhier SoCs" + depends on ARCH_MULTI_V7 + select ARM_AMBA + select ARM_GLOBAL_TIMER + select ARM_GIC + select HAVE_ARM_SCU + select HAVE_ARM_TWD if SMP + help + Support for UniPhier SoC family developed by Socionext Inc. + (formerly, System LSI Business Division of Panasonic Corporation) diff --git a/arch/arm/mach-uniphier/Makefile b/arch/arm/mach-uniphier/Makefile new file mode 100644 index 000000000..60bd2265f --- /dev/null +++ b/arch/arm/mach-uniphier/Makefile @@ -0,0 +1,2 @@ +obj-y := uniphier.o +obj-$(CONFIG_SMP) += platsmp.o diff --git a/arch/arm/mach-uniphier/platsmp.c b/arch/arm/mach-uniphier/platsmp.c new file mode 100644 index 000000000..5943e1cb7 --- /dev/null +++ b/arch/arm/mach-uniphier/platsmp.c @@ -0,0 +1,90 @@ +/* + * Copyright (C) 2015 Masahiro Yamada <yamada.masahiro@socionext.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <linux/sizes.h> +#include <linux/compiler.h> +#include <linux/init.h> +#include <linux/io.h> +#include <linux/regmap.h> +#include <linux/mfd/syscon.h> +#include <asm/smp.h> +#include <asm/smp_scu.h> + +static struct regmap *sbcm_regmap; + +static void __init uniphier_smp_prepare_cpus(unsigned int max_cpus) +{ + static cpumask_t only_cpu_0 = { CPU_BITS_CPU0 }; + unsigned long scu_base_phys = 0; + void __iomem *scu_base; + + sbcm_regmap = syscon_regmap_lookup_by_compatible( + "socionext,uniphier-system-bus-controller-misc"); + if (IS_ERR(sbcm_regmap)) { + pr_err("failed to regmap system-bus-controller-misc\n"); + goto err; + } + + if (scu_a9_has_base()) + scu_base_phys = scu_a9_get_base(); + + if (!scu_base_phys) { + pr_err("failed to get scu base\n"); + goto err; + } + + scu_base = ioremap(scu_base_phys, SZ_128); + if (!scu_base) { + pr_err("failed to remap scu base (0x%08lx)\n", scu_base_phys); + goto err; + } + + scu_enable(scu_base); + iounmap(scu_base); + + return; +err: + pr_warn("disabling SMP\n"); + init_cpu_present(&only_cpu_0); + sbcm_regmap = NULL; +} + +static void __naked uniphier_secondary_startup(void) +{ + asm("bl v7_invalidate_l1\n" + "b secondary_startup\n"); +}; + +static int uniphier_boot_secondary(unsigned int cpu, + struct task_struct *idle) +{ + int ret; + + if (!sbcm_regmap) + return -ENODEV; + + ret = regmap_write(sbcm_regmap, 0x1208, + virt_to_phys(uniphier_secondary_startup)); + if (!ret) + asm("sev"); /* wake up secondary CPU */ + + return ret; +} + +struct smp_operations uniphier_smp_ops __initdata = { + .smp_prepare_cpus = uniphier_smp_prepare_cpus, + .smp_boot_secondary = uniphier_boot_secondary, +}; +CPU_METHOD_OF_DECLARE(uniphier_smp, "socionext,uniphier-smp", + &uniphier_smp_ops); diff --git a/arch/arm/mach-uniphier/uniphier.c b/arch/arm/mach-uniphier/uniphier.c new file mode 100644 index 000000000..9be10efac --- /dev/null +++ b/arch/arm/mach-uniphier/uniphier.c @@ -0,0 +1,30 @@ +/* + * Copyright (C) 2015 Masahiro Yamada <yamada.masahiro@socionext.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <asm/mach/arch.h> + +static const char * const uniphier_dt_compat[] __initconst = { + "socionext,ph1-sld3", + "socionext,ph1-ld4", + "socionext,ph1-pro4", + "socionext,ph1-sld8", + "socionext,ph1-pro5", + "socionext,proxstream2", + "socionext,ph1-ld6b", + NULL, +}; + +DT_MACHINE_START(UNIPHIER, "Socionext UniPhier") + .dt_compat = uniphier_dt_compat, +MACHINE_END diff --git a/arch/arm/mach-ux500/cache-l2x0.c b/arch/arm/mach-ux500/cache-l2x0.c index e97ee556f..7557bede7 100644 --- a/arch/arm/mach-ux500/cache-l2x0.c +++ b/arch/arm/mach-ux500/cache-l2x0.c @@ -6,6 +6,7 @@ #include <linux/io.h> #include <linux/of.h> +#include <linux/of_address.h> #include <asm/hardware/cache-l2x0.h> @@ -15,7 +16,14 @@ static int __init ux500_l2x0_unlock(void) { int i; - void __iomem *l2x0_base = __io_address(U8500_L2CC_BASE); + struct device_node *np; + void __iomem *l2x0_base; + + np = of_find_compatible_node(NULL, NULL, "arm,pl310-cache"); + l2x0_base = of_iomap(np, 0); + of_node_put(np); + if (!l2x0_base) + return -ENODEV; /* * Unlock Data and Instruction Lock if locked. Ux500 U-Boot versions @@ -30,6 +38,7 @@ static int __init ux500_l2x0_unlock(void) writel_relaxed(0x0, l2x0_base + L2X0_LOCKDOWN_WAY_I_BASE + i * L2X0_LOCKDOWN_STRIDE); } + iounmap(l2x0_base); return 0; } diff --git a/arch/arm/mach-ux500/cpu-db8500.c b/arch/arm/mach-ux500/cpu-db8500.c index 6f63954c8..16913800b 100644 --- a/arch/arm/mach-ux500/cpu-db8500.c +++ b/arch/arm/mach-ux500/cpu-db8500.c @@ -43,60 +43,10 @@ static struct prcmu_pdata db8500_prcmu_pdata = { .legacy_offset = DB8500_PRCMU_LEGACY_OFFSET, }; -/* minimum static i/o mapping required to boot U8500 platforms */ -static struct map_desc u8500_uart_io_desc[] __initdata = { - __IO_DEV_DESC(U8500_UART0_BASE, SZ_4K), - __IO_DEV_DESC(U8500_UART2_BASE, SZ_4K), -}; -/* U8500 and U9540 common io_desc */ -static struct map_desc u8500_common_io_desc[] __initdata = { - /* SCU base also covers GIC CPU BASE and TWD with its 4K page */ - __IO_DEV_DESC(U8500_SCU_BASE, SZ_4K), - __IO_DEV_DESC(U8500_GIC_DIST_BASE, SZ_4K), - __IO_DEV_DESC(U8500_L2CC_BASE, SZ_4K), - __IO_DEV_DESC(U8500_MTU0_BASE, SZ_4K), - __IO_DEV_DESC(U8500_BACKUPRAM0_BASE, SZ_8K), - - __IO_DEV_DESC(U8500_CLKRST1_BASE, SZ_4K), - __IO_DEV_DESC(U8500_CLKRST2_BASE, SZ_4K), - __IO_DEV_DESC(U8500_CLKRST3_BASE, SZ_4K), - __IO_DEV_DESC(U8500_CLKRST5_BASE, SZ_4K), - __IO_DEV_DESC(U8500_CLKRST6_BASE, SZ_4K), - - __IO_DEV_DESC(U8500_GPIO0_BASE, SZ_4K), - __IO_DEV_DESC(U8500_GPIO1_BASE, SZ_4K), - __IO_DEV_DESC(U8500_GPIO2_BASE, SZ_4K), - __IO_DEV_DESC(U8500_GPIO3_BASE, SZ_4K), -}; - -/* U8500 IO map specific description */ -static struct map_desc u8500_io_desc[] __initdata = { - __IO_DEV_DESC(U8500_PRCMU_BASE, SZ_4K), - __IO_DEV_DESC(U8500_PRCMU_TCDM_BASE, SZ_4K), - -}; - -/* U9540 IO map specific description */ -static struct map_desc u9540_io_desc[] __initdata = { - __IO_DEV_DESC(U8500_PRCMU_BASE, SZ_4K + SZ_8K), - __IO_DEV_DESC(U8500_PRCMU_TCDM_BASE, SZ_4K + SZ_8K), -}; - static void __init u8500_map_io(void) { - /* - * Map the UARTs early so that the DEBUG_LL stuff continues to work. - */ - iotable_init(u8500_uart_io_desc, ARRAY_SIZE(u8500_uart_io_desc)); - - ux500_map_io(); - - iotable_init(u8500_common_io_desc, ARRAY_SIZE(u8500_common_io_desc)); - - if (cpu_is_ux540_family()) - iotable_init(u9540_io_desc, ARRAY_SIZE(u9540_io_desc)); - else - iotable_init(u8500_io_desc, ARRAY_SIZE(u8500_io_desc)); + debug_ll_io_init(); + ux500_setup_id(); } /* @@ -125,14 +75,18 @@ static struct arm_pmu_platdata db8500_pmu_platdata = { static const char *db8500_read_soc_id(void) { - void __iomem *uid = __io_address(U8500_BB_UID_BASE); + void __iomem *uid; + uid = ioremap(U8500_BB_UID_BASE, 0x20); + if (!uid) + return NULL; /* Throw these device-specific numbers into the entropy pool */ add_device_randomness(uid, 0x14); return kasprintf(GFP_KERNEL, "%08x%08x%08x%08x%08x", readl((u32 *)uid+0), readl((u32 *)uid+1), readl((u32 *)uid+2), readl((u32 *)uid+3), readl((u32 *)uid+4)); + iounmap(uid); } static struct device * __init db8500_soc_device_init(void) diff --git a/arch/arm/mach-ux500/cpu.c b/arch/arm/mach-ux500/cpu.c index 6ced0f680..e31d3d61c 100644 --- a/arch/arm/mach-ux500/cpu.c +++ b/arch/arm/mach-ux500/cpu.c @@ -16,6 +16,7 @@ #include <linux/stat.h> #include <linux/of.h> #include <linux/of_irq.h> +#include <linux/of_address.h> #include <linux/irq.h> #include <linux/irqchip.h> #include <linux/irqchip/arm-gic.h> @@ -52,31 +53,36 @@ void ux500_restart(enum reboot_mode mode, const char *cmd) */ void __init ux500_init_irq(void) { + struct device_node *np; + struct resource r; + gic_set_irqchip_flags(IRQCHIP_SKIP_SET_WAKE | IRQCHIP_MASK_ON_SUSPEND); irqchip_init(); + np = of_find_compatible_node(NULL, NULL, "stericsson,db8500-prcmu"); + of_address_to_resource(np, 0, &r); + of_node_put(np); + if (!r.start) { + pr_err("could not find PRCMU base resource\n"); + return; + } + prcmu_early_init(r.start, r.end-r.start); + ux500_pm_init(r.start, r.end-r.start); /* * Init clocks here so that they are available for system timer * initialization. */ if (cpu_is_u8500_family()) { - prcmu_early_init(U8500_PRCMU_BASE, SZ_8K - 1); - ux500_pm_init(U8500_PRCMU_BASE, SZ_8K - 1); - u8500_of_clk_init(U8500_CLKRST1_BASE, U8500_CLKRST2_BASE, U8500_CLKRST3_BASE, U8500_CLKRST5_BASE, U8500_CLKRST6_BASE); } else if (cpu_is_u9540()) { - prcmu_early_init(U8500_PRCMU_BASE, SZ_8K - 1); - ux500_pm_init(U8500_PRCMU_BASE, SZ_8K - 1); u9540_clk_init(U8500_CLKRST1_BASE, U8500_CLKRST2_BASE, U8500_CLKRST3_BASE, U8500_CLKRST5_BASE, U8500_CLKRST6_BASE); } else if (cpu_is_u8540()) { - prcmu_early_init(U8500_PRCMU_BASE, SZ_8K + SZ_4K - 1); - ux500_pm_init(U8500_PRCMU_BASE, SZ_8K + SZ_4K - 1); u8540_clk_init(U8500_CLKRST1_BASE, U8500_CLKRST2_BASE, U8500_CLKRST3_BASE, U8500_CLKRST5_BASE, U8500_CLKRST6_BASE); diff --git a/arch/arm/mach-ux500/id.c b/arch/arm/mach-ux500/id.c index 392f2fdb3..1e81e9900 100644 --- a/arch/arm/mach-ux500/id.c +++ b/arch/arm/mach-ux500/id.c @@ -72,7 +72,7 @@ static unsigned int partnumber(unsigned int asicid) * DB9540 0x413fc090 0xFFFFDBF4 0x009540xx */ -void __init ux500_map_io(void) +void __init ux500_setup_id(void) { unsigned int cpuid = read_cpuid_id(); unsigned int asicid = 0; diff --git a/arch/arm/mach-ux500/platsmp.c b/arch/arm/mach-ux500/platsmp.c index a44967f31..62b1de922 100644 --- a/arch/arm/mach-ux500/platsmp.c +++ b/arch/arm/mach-ux500/platsmp.c @@ -16,6 +16,8 @@ #include <linux/device.h> #include <linux/smp.h> #include <linux/io.h> +#include <linux/of.h> +#include <linux/of_address.h> #include <asm/cacheflush.h> #include <asm/smp_plat.h> @@ -26,6 +28,9 @@ #include "db8500-regs.h" #include "id.h" +static void __iomem *scu_base; +static void __iomem *backupram; + /* This is called from headsmp.S to wakeup the secondary core */ extern void u8500_secondary_startup(void); @@ -41,16 +46,6 @@ static void write_pen_release(int val) sync_cache_w(&pen_release); } -static void __iomem *scu_base_addr(void) -{ - if (cpu_is_u8500_family() || cpu_is_ux540_family()) - return __io_address(U8500_SCU_BASE); - else - ux500_unknown_soc(); - - return NULL; -} - static DEFINE_SPINLOCK(boot_lock); static void ux500_secondary_init(unsigned int cpu) @@ -104,13 +99,6 @@ static int ux500_boot_secondary(unsigned int cpu, struct task_struct *idle) static void __init wakeup_secondary(void) { - void __iomem *backupram; - - if (cpu_is_u8500_family() || cpu_is_ux540_family()) - backupram = __io_address(U8500_BACKUPRAM0_BASE); - else - ux500_unknown_soc(); - /* * write the address of secondary startup into the backup ram register * at offset 0x1FF4, then write the magic number 0xA1FEED01 to the @@ -135,10 +123,16 @@ static void __init wakeup_secondary(void) */ static void __init ux500_smp_init_cpus(void) { - void __iomem *scu_base = scu_base_addr(); unsigned int i, ncores; + struct device_node *np; - ncores = scu_base ? scu_get_core_count(scu_base) : 1; + np = of_find_compatible_node(NULL, NULL, "arm,cortex-a9-scu"); + scu_base = of_iomap(np, 0); + of_node_put(np); + if (!scu_base) + return; + backupram = ioremap(U8500_BACKUPRAM0_BASE, SZ_8K); + ncores = scu_get_core_count(scu_base); /* sanity check */ if (ncores > nr_cpu_ids) { @@ -153,8 +147,7 @@ static void __init ux500_smp_init_cpus(void) static void __init ux500_smp_prepare_cpus(unsigned int max_cpus) { - - scu_enable(scu_base_addr()); + scu_enable(scu_base); wakeup_secondary(); } diff --git a/arch/arm/mach-ux500/pm.c b/arch/arm/mach-ux500/pm.c index 2cb587b50..8538910db 100644 --- a/arch/arm/mach-ux500/pm.c +++ b/arch/arm/mach-ux500/pm.c @@ -15,6 +15,8 @@ #include <linux/io.h> #include <linux/suspend.h> #include <linux/platform_data/arm-ux500-pm.h> +#include <linux/of.h> +#include <linux/of_address.h> #include "db8500-regs.h" #include "pm_domains.h" @@ -42,6 +44,7 @@ #define PRCM_ARMITVAL127TO96 (prcmu_base + 0x26C) static void __iomem *prcmu_base; +static void __iomem *dist_base; /* This function decouple the gic from the prcmu */ int prcmu_gic_decouple(void) @@ -88,7 +91,6 @@ bool prcmu_gic_pending_irq(void) { u32 pr; /* Pending register */ u32 er; /* Enable register */ - void __iomem *dist_base = __io_address(U8500_GIC_DIST_BASE); int i; /* 5 registers. STI & PPI not skipped */ @@ -143,7 +145,6 @@ bool prcmu_is_cpu_in_wfi(int cpu) int prcmu_copy_gic_settings(void) { u32 er; /* Enable register */ - void __iomem *dist_base = __io_address(U8500_GIC_DIST_BASE); int i; /* We skip the STI and PPI */ @@ -179,11 +180,21 @@ static const struct platform_suspend_ops ux500_suspend_ops = { void __init ux500_pm_init(u32 phy_base, u32 size) { + struct device_node *np; + prcmu_base = ioremap(phy_base, size); if (!prcmu_base) { pr_err("could not remap PRCMU for PM functions\n"); return; } + np = of_find_compatible_node(NULL, NULL, "arm,cortex-a9-gic"); + dist_base = of_iomap(np, 0); + of_node_put(np); + if (!dist_base) { + pr_err("could not remap GIC dist base for PM functions\n"); + return; + } + /* * On watchdog reboot the GIC is in some cases decoupled. * This will make sure that the GIC is correctly configured. diff --git a/arch/arm/mach-ux500/setup.h b/arch/arm/mach-ux500/setup.h index 2dea8b59d..1fb6ad278 100644 --- a/arch/arm/mach-ux500/setup.h +++ b/arch/arm/mach-ux500/setup.h @@ -18,7 +18,7 @@ void ux500_restart(enum reboot_mode mode, const char *cmd); -void __init ux500_map_io(void); +void __init ux500_setup_id(void); extern void __init ux500_init_irq(void); @@ -26,20 +26,6 @@ extern struct device *ux500_soc_device_init(const char *soc_id); extern void ux500_timer_init(void); -#define __IO_DEV_DESC(x, sz) { \ - .virtual = IO_ADDRESS(x), \ - .pfn = __phys_to_pfn(x), \ - .length = sz, \ - .type = MT_DEVICE, \ -} - -#define __MEM_DEV_DESC(x, sz) { \ - .virtual = IO_ADDRESS(x), \ - .pfn = __phys_to_pfn(x), \ - .length = sz, \ - .type = MT_MEMORY_RWX, \ -} - extern struct smp_operations ux500_smp_ops; extern void ux500_cpu_die(unsigned int cpu); diff --git a/arch/arm/mach-versatile/core.c b/arch/arm/mach-versatile/core.c index 6ea09fe53..23a04fe5d 100644 --- a/arch/arm/mach-versatile/core.c +++ b/arch/arm/mach-versatile/core.c @@ -41,8 +41,9 @@ #include <linux/bitops.h> #include <linux/reboot.h> +#include <clocksource/timer-sp804.h> + #include <asm/irq.h> -#include <asm/hardware/arm_timer.h> #include <asm/hardware/icst.h> #include <asm/mach-types.h> @@ -52,7 +53,6 @@ #include <asm/mach/map.h> #include <mach/hardware.h> #include <mach/platform.h> -#include <asm/hardware/timer-sp.h> #include <plat/sched_clock.h> @@ -798,10 +798,10 @@ void __init versatile_timer_init(void) /* * Initialise to a known state (all timers off) */ - writel(0, TIMER0_VA_BASE + TIMER_CTRL); - writel(0, TIMER1_VA_BASE + TIMER_CTRL); - writel(0, TIMER2_VA_BASE + TIMER_CTRL); - writel(0, TIMER3_VA_BASE + TIMER_CTRL); + sp804_timer_disable(TIMER0_VA_BASE); + sp804_timer_disable(TIMER1_VA_BASE); + sp804_timer_disable(TIMER2_VA_BASE); + sp804_timer_disable(TIMER3_VA_BASE); sp804_clocksource_init(TIMER3_VA_BASE, "timer3"); sp804_clockevents_init(TIMER0_VA_BASE, IRQ_TIMERINT0_1, "timer0"); diff --git a/arch/arm/mach-vexpress/spc.c b/arch/arm/mach-vexpress/spc.c index f61158c6c..5766ce2be 100644 --- a/arch/arm/mach-vexpress/spc.c +++ b/arch/arm/mach-vexpress/spc.c @@ -589,4 +589,4 @@ static int __init ve_spc_clk_init(void) platform_device_register_simple("vexpress-spc-cpufreq", -1, NULL, 0); return 0; } -module_init(ve_spc_clk_init); +device_initcall(ve_spc_clk_init); diff --git a/arch/arm/mach-zx/Kconfig b/arch/arm/mach-zx/Kconfig new file mode 100644 index 000000000..2a910dc0d --- /dev/null +++ b/arch/arm/mach-zx/Kconfig @@ -0,0 +1,18 @@ +menuconfig ARCH_ZX + bool "ZTE ZX family" if ARCH_MULTI_V7 + help + Support for ZTE ZX-based family of processors. TV + set-top-box processor is supported. More will be + added soon. + +if ARCH_ZX + +config SOC_ZX296702 + def_bool y + select ARM_GIC + select ARM_GLOBAL_TIMER + select HAVE_ARM_SCU if SMP + select HAVE_ARM_TWD if SMP + help + Support for ZTE ZX296702 SoC which is a dual core CortexA9MP +endif diff --git a/arch/arm/mach-zx/Makefile b/arch/arm/mach-zx/Makefile new file mode 100644 index 000000000..7c2edf6e5 --- /dev/null +++ b/arch/arm/mach-zx/Makefile @@ -0,0 +1,2 @@ +obj-$(CONFIG_SOC_ZX296702) += zx296702.o +obj-$(CONFIG_SMP) += headsmp.o platsmp.o diff --git a/arch/arm/mach-zx/core.h b/arch/arm/mach-zx/core.h new file mode 100644 index 000000000..3efe8e038 --- /dev/null +++ b/arch/arm/mach-zx/core.h @@ -0,0 +1,19 @@ +/* + * Copyright 2014 Linaro Ltd. + * Copyright (C) 2014 ZTE Corporation. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef __MACH_ZX_CORE_H +#define __MACH_ZX_CORE_H + +extern void zx_resume_jump(void); +extern size_t zx_suspend_iram_sz; +extern unsigned long zx_secondary_startup_pa; + +void zx_secondary_startup(void); + +#endif /* __MACH_ZX_CORE_H */ diff --git a/arch/arm/mach-zx/headsmp.S b/arch/arm/mach-zx/headsmp.S new file mode 100644 index 000000000..a1aa40283 --- /dev/null +++ b/arch/arm/mach-zx/headsmp.S @@ -0,0 +1,33 @@ +/* + * Copyright 2014 Linaro Ltd. + * Copyright (C) 2014 ZTE Corporation. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/linkage.h> + + .align 3 + .arm + +/* It runs from physical address */ +ENTRY(zx_resume_jump) + adr r1, zx_secondary_startup_pa + ldr r0, [r1] + bx r0 +ENDPROC(zx_resume_jump) + +ENTRY(zx_secondary_startup_pa) + .word zx_secondary_startup_pa + +ENTRY(zx_suspend_iram_sz) + .word . - zx_resume_jump +ENDPROC(zx_secondary_startup_pa) + + +ENTRY(zx_secondary_startup) + bl v7_invalidate_l1 + b secondary_startup +ENDPROC(zx_secondary_startup) diff --git a/arch/arm/mach-zx/platsmp.c b/arch/arm/mach-zx/platsmp.c new file mode 100644 index 000000000..a3693982d --- /dev/null +++ b/arch/arm/mach-zx/platsmp.c @@ -0,0 +1,189 @@ +/* + * Copyright 2014 Linaro Ltd. + * Copyright (C) 2014 ZTE Corporation. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/delay.h> +#include <linux/errno.h> +#include <linux/init.h> +#include <linux/io.h> +#include <linux/jiffies.h> +#include <linux/of.h> +#include <linux/of_address.h> +#include <linux/smp.h> + +#include <asm/cacheflush.h> +#include <asm/cp15.h> +#include <asm/fncpy.h> +#include <asm/proc-fns.h> +#include <asm/smp_scu.h> +#include <asm/smp_plat.h> + +#include "core.h" + +#define AON_SYS_CTRL_RESERVED1 0xa8 + +#define BUS_MATRIX_REMAP_CONFIG 0x00 + +#define PCU_CPU0_CTRL 0x00 +#define PCU_CPU1_CTRL 0x04 +#define PCU_CPU1_ST 0x0c +#define PCU_GLOBAL_CTRL 0x14 +#define PCU_EXPEND_CONTROL 0x34 + +#define ZX_IRAM_BASE 0x00200000 + +static void __iomem *pcu_base; +static void __iomem *matrix_base; +static void __iomem *scu_base; + +void __init zx_smp_prepare_cpus(unsigned int max_cpus) +{ + struct device_node *np; + unsigned long base = 0; + void __iomem *aonsysctrl_base; + void __iomem *sys_iram; + + base = scu_a9_get_base(); + scu_base = ioremap(base, SZ_256); + if (!scu_base) { + pr_err("%s: failed to map scu\n", __func__); + return; + } + + scu_enable(scu_base); + + np = of_find_compatible_node(NULL, NULL, "zte,sysctrl"); + if (!np) { + pr_err("%s: failed to find sysctrl node\n", __func__); + return; + } + + aonsysctrl_base = of_iomap(np, 0); + if (!aonsysctrl_base) { + pr_err("%s: failed to map aonsysctrl\n", __func__); + of_node_put(np); + return; + } + + /* + * Write the address of secondary startup into the + * system-wide flags register. The BootMonitor waits + * until it receives a soft interrupt, and then the + * secondary CPU branches to this address. + */ + __raw_writel(virt_to_phys(zx_secondary_startup), + aonsysctrl_base + AON_SYS_CTRL_RESERVED1); + + iounmap(aonsysctrl_base); + of_node_put(np); + + np = of_find_compatible_node(NULL, NULL, "zte,zx296702-pcu"); + pcu_base = of_iomap(np, 0); + of_node_put(np); + WARN_ON(!pcu_base); + + np = of_find_compatible_node(NULL, NULL, "zte,zx-bus-matrix"); + matrix_base = of_iomap(np, 0); + of_node_put(np); + WARN_ON(!matrix_base); + + /* Map the first 4 KB IRAM for suspend usage */ + sys_iram = __arm_ioremap_exec(ZX_IRAM_BASE, PAGE_SIZE, false); + zx_secondary_startup_pa = virt_to_phys(zx_secondary_startup); + fncpy(sys_iram, &zx_resume_jump, zx_suspend_iram_sz); +} + +static int zx_boot_secondary(unsigned int cpu, struct task_struct *idle) +{ + static bool first_boot = true; + + if (first_boot) { + arch_send_wakeup_ipi_mask(cpumask_of(cpu)); + first_boot = false; + return 0; + } + + /* Swap the base address mapping between IRAM and IROM */ + writel_relaxed(0x1, matrix_base + BUS_MATRIX_REMAP_CONFIG); + + /* Power on CPU1 */ + writel_relaxed(0x0, pcu_base + PCU_CPU1_CTRL); + + /* Wait for power on ack */ + while (readl_relaxed(pcu_base + PCU_CPU1_ST) & 0x4) + cpu_relax(); + + /* Swap back the mapping of IRAM and IROM */ + writel_relaxed(0x0, matrix_base + BUS_MATRIX_REMAP_CONFIG); + + return 0; +} + +#ifdef CONFIG_HOTPLUG_CPU +static inline void cpu_enter_lowpower(void) +{ + unsigned int v; + + asm volatile( + "mcr p15, 0, %1, c7, c5, 0\n" + " mcr p15, 0, %1, c7, c10, 4\n" + /* + * Turn off coherency + */ + " mrc p15, 0, %0, c1, c0, 1\n" + " bic %0, %0, %3\n" + " mcr p15, 0, %0, c1, c0, 1\n" + " mrc p15, 0, %0, c1, c0, 0\n" + " bic %0, %0, %2\n" + " mcr p15, 0, %0, c1, c0, 0\n" + : "=&r" (v) + : "r" (0), "Ir" (CR_C), "Ir" (0x40) + : "cc"); +} + +static int zx_cpu_kill(unsigned int cpu) +{ + unsigned long timeout = jiffies + msecs_to_jiffies(2000); + + writel_relaxed(0x2, pcu_base + PCU_CPU1_CTRL); + + while ((readl_relaxed(pcu_base + PCU_CPU1_ST) & 0x3) != 0x0) { + if (time_after(jiffies, timeout)) { + pr_err("*** cpu1 poweroff timeout\n"); + break; + } + } + return 1; +} + +static void zx_cpu_die(unsigned int cpu) +{ + scu_power_mode(scu_base, SCU_PM_POWEROFF); + cpu_enter_lowpower(); + + while (1) + cpu_do_idle(); +} +#endif + +static void zx_secondary_init(unsigned int cpu) +{ + scu_power_mode(scu_base, SCU_PM_NORMAL); +} + +struct smp_operations zx_smp_ops __initdata = { + .smp_prepare_cpus = zx_smp_prepare_cpus, + .smp_secondary_init = zx_secondary_init, + .smp_boot_secondary = zx_boot_secondary, +#ifdef CONFIG_HOTPLUG_CPU + .cpu_kill = zx_cpu_kill, + .cpu_die = zx_cpu_die, +#endif +}; + +CPU_METHOD_OF_DECLARE(zx_smp, "zte,zx296702-smp", &zx_smp_ops); diff --git a/arch/arm/mach-zx/zx296702.c b/arch/arm/mach-zx/zx296702.c new file mode 100644 index 000000000..60bb1a8e1 --- /dev/null +++ b/arch/arm/mach-zx/zx296702.c @@ -0,0 +1,25 @@ +/* + * Copyright 2014 Linaro Ltd. + * Copyright (C) 2014 ZTE Corporation. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <asm/mach/arch.h> +#include <asm/mach/map.h> + +#include <linux/of_address.h> +#include <linux/of_platform.h> + +static const char *zx296702_dt_compat[] __initconst = { + "zte,zx296702", + NULL, +}; + +DT_MACHINE_START(ZX, "ZTE ZX296702 (Device Tree)") + .dt_compat = zx296702_dt_compat, + .l2c_aux_val = 0, + .l2c_aux_mask = ~0, +MACHINE_END diff --git a/arch/arm/mach-zynq/common.c b/arch/arm/mach-zynq/common.c index 58ef2a700..616d5840f 100644 --- a/arch/arm/mach-zynq/common.c +++ b/arch/arm/mach-zynq/common.c @@ -190,11 +190,6 @@ static void __init zynq_irq_init(void) irqchip_init(); } -static void zynq_system_reset(enum reboot_mode mode, const char *cmd) -{ - zynq_slcr_system_reset(); -} - static const char * const zynq_dt_match[] = { "xlnx,zynq-7000", NULL @@ -212,5 +207,4 @@ DT_MACHINE_START(XILINX_EP107, "Xilinx Zynq Platform") .init_time = zynq_timer_init, .dt_compat = zynq_dt_match, .reserve = zynq_memory_init, - .restart = zynq_system_reset, MACHINE_END diff --git a/arch/arm/mach-zynq/common.h b/arch/arm/mach-zynq/common.h index 382c60e9a..79cda2e5f 100644 --- a/arch/arm/mach-zynq/common.h +++ b/arch/arm/mach-zynq/common.h @@ -17,11 +17,8 @@ #ifndef __MACH_ZYNQ_COMMON_H__ #define __MACH_ZYNQ_COMMON_H__ -void zynq_secondary_startup(void); - extern int zynq_slcr_init(void); extern int zynq_early_slcr_init(void); -extern void zynq_slcr_system_reset(void); extern void zynq_slcr_cpu_stop(int cpu); extern void zynq_slcr_cpu_start(int cpu); extern bool zynq_slcr_cpu_state_read(int cpu); diff --git a/arch/arm/mach-zynq/headsmp.S b/arch/arm/mach-zynq/headsmp.S index dd8c07194..045c72720 100644 --- a/arch/arm/mach-zynq/headsmp.S +++ b/arch/arm/mach-zynq/headsmp.S @@ -22,8 +22,3 @@ zynq_secondary_trampoline_jump: .globl zynq_secondary_trampoline_end zynq_secondary_trampoline_end: ENDPROC(zynq_secondary_trampoline) - -ENTRY(zynq_secondary_startup) - bl v7_invalidate_l1 - b secondary_startup -ENDPROC(zynq_secondary_startup) diff --git a/arch/arm/mach-zynq/platsmp.c b/arch/arm/mach-zynq/platsmp.c index 52d768ff7..f66816c49 100644 --- a/arch/arm/mach-zynq/platsmp.c +++ b/arch/arm/mach-zynq/platsmp.c @@ -87,10 +87,9 @@ int zynq_cpun_start(u32 address, int cpu) } EXPORT_SYMBOL(zynq_cpun_start); -static int zynq_boot_secondary(unsigned int cpu, - struct task_struct *idle) +static int zynq_boot_secondary(unsigned int cpu, struct task_struct *idle) { - return zynq_cpun_start(virt_to_phys(zynq_secondary_startup), cpu); + return zynq_cpun_start(virt_to_phys(secondary_startup), cpu); } /* diff --git a/arch/arm/mach-zynq/slcr.c b/arch/arm/mach-zynq/slcr.c index c3c24fd8b..26320ebf3 100644 --- a/arch/arm/mach-zynq/slcr.c +++ b/arch/arm/mach-zynq/slcr.c @@ -15,6 +15,7 @@ */ #include <linux/io.h> +#include <linux/reboot.h> #include <linux/mfd/syscon.h> #include <linux/of_address.h> #include <linux/regmap.h> @@ -92,20 +93,21 @@ u32 zynq_slcr_get_device_id(void) } /** - * zynq_slcr_system_reset - Reset the entire system. + * zynq_slcr_system_restart - Restart the entire system. + * + * @nb: Pointer to restart notifier block (unused) + * @action: Reboot mode (unused) + * @data: Restart handler private data (unused) + * + * Return: 0 always */ -void zynq_slcr_system_reset(void) +static +int zynq_slcr_system_restart(struct notifier_block *nb, + unsigned long action, void *data) { u32 reboot; /* - * Unlock the SLCR then reset the system. - * Note that this seems to require raw i/o - * functions or there's a lockup? - */ - zynq_slcr_unlock(); - - /* * Clear 0x0F000000 bits of reboot status register to workaround * the FSBL not loading the bitstream after soft-reboot * This is a temporary solution until we know more. @@ -113,8 +115,14 @@ void zynq_slcr_system_reset(void) zynq_slcr_read(&reboot, SLCR_REBOOT_STATUS_OFFSET); zynq_slcr_write(reboot & 0xF0FFFFFF, SLCR_REBOOT_STATUS_OFFSET); zynq_slcr_write(1, SLCR_PS_RST_CTRL_OFFSET); + return 0; } +static struct notifier_block zynq_slcr_restart_nb = { + .notifier_call = zynq_slcr_system_restart, + .priority = 192, +}; + /** * zynq_slcr_cpu_start - Start cpu * @cpu: cpu number @@ -219,6 +227,8 @@ int __init zynq_early_slcr_init(void) /* unlock the SLCR so that registers can be changed */ zynq_slcr_unlock(); + register_restart_handler(&zynq_slcr_restart_nb); + pr_info("%s mapped to %p\n", np->name, zynq_slcr_base); of_node_put(np); diff --git a/arch/arm/mm/Kconfig b/arch/arm/mm/Kconfig index b4f92b9a1..7c6b976ab 100644 --- a/arch/arm/mm/Kconfig +++ b/arch/arm/mm/Kconfig @@ -6,7 +6,7 @@ comment "Processor Type" # ARM7TDMI config CPU_ARM7TDMI - bool "Support ARM7TDMI processor" + bool depends on !MMU select CPU_32v4T select CPU_ABRT_LV4T @@ -56,7 +56,7 @@ config CPU_ARM740T # ARM9TDMI config CPU_ARM9TDMI - bool "Support ARM9TDMI processor" + bool depends on !MMU select CPU_32v4T select CPU_ABRT_NOMMU @@ -604,6 +604,22 @@ config CPU_USE_DOMAINS This option enables or disables the use of domain switching via the set_fs() function. +config CPU_V7M_NUM_IRQ + int "Number of external interrupts connected to the NVIC" + depends on CPU_V7M + default 90 if ARCH_STM32 + default 38 if ARCH_EFM32 + default 112 if SOC_VF610 + default 240 + help + This option indicates the number of interrupts connected to the NVIC. + The value can be larger than the real number of interrupts supported + by the system, but must not be lower. + The default value is 240, corresponding to the maximum number of + interrupts supported by the NVIC on Cortex-M family. + + If unsure, keep default value. + # # CPU supports 36-bit I/O # @@ -624,6 +640,10 @@ config ARM_LPAE If unsure, say N. +config ARM_PV_FIXUP + def_bool y + depends on ARM_LPAE && ARM_PATCH_PHYS_VIRT && ARCH_KEYSTONE + config ARCH_PHYS_ADDR_T_64BIT def_bool ARM_LPAE diff --git a/arch/arm/mm/Makefile b/arch/arm/mm/Makefile index d3afdf9eb..57c8df500 100644 --- a/arch/arm/mm/Makefile +++ b/arch/arm/mm/Makefile @@ -18,6 +18,7 @@ obj-$(CONFIG_MODULES) += proc-syms.o obj-$(CONFIG_ALIGNMENT_TRAP) += alignment.o obj-$(CONFIG_HIGHMEM) += highmem.o obj-$(CONFIG_HUGETLB_PAGE) += hugetlbpage.o +obj-$(CONFIG_ARM_PV_FIXUP) += pv-fixup-asm.o obj-$(CONFIG_CPU_ABRT_NOMMU) += abort-nommu.o obj-$(CONFIG_CPU_ABRT_EV4) += abort-ev4.o @@ -55,6 +56,8 @@ obj-$(CONFIG_CPU_XSCALE) += copypage-xscale.o obj-$(CONFIG_CPU_XSC3) += copypage-xsc3.o obj-$(CONFIG_CPU_COPY_FA) += copypage-fa.o +CFLAGS_copypage-feroceon.o := -march=armv5te + obj-$(CONFIG_CPU_TLB_V4WT) += tlb-v4.o obj-$(CONFIG_CPU_TLB_V4WB) += tlb-v4wb.o obj-$(CONFIG_CPU_TLB_V4WBI) += tlb-v4wbi.o diff --git a/arch/arm/mm/cache-l2x0.c b/arch/arm/mm/cache-l2x0.c index e309c8f35..71b3d3309 100644 --- a/arch/arm/mm/cache-l2x0.c +++ b/arch/arm/mm/cache-l2x0.c @@ -38,10 +38,11 @@ struct l2c_init_data { unsigned way_size_0; unsigned num_lock; void (*of_parse)(const struct device_node *, u32 *, u32 *); - void (*enable)(void __iomem *, u32, unsigned); + void (*enable)(void __iomem *, unsigned); void (*fixup)(void __iomem *, u32, struct outer_cache_fns *); void (*save)(void __iomem *); void (*configure)(void __iomem *); + void (*unlock)(void __iomem *, unsigned); struct outer_cache_fns outer_cache; }; @@ -110,14 +111,6 @@ static inline void l2c_unlock(void __iomem *base, unsigned num) static void l2c_configure(void __iomem *base) { - if (outer_cache.configure) { - outer_cache.configure(&l2x0_saved_regs); - return; - } - - if (l2x0_data->configure) - l2x0_data->configure(base); - l2c_write_sec(l2x0_saved_regs.aux_ctrl, base, L2X0_AUX_CTRL); } @@ -125,18 +118,16 @@ static void l2c_configure(void __iomem *base) * Enable the L2 cache controller. This function must only be * called when the cache controller is known to be disabled. */ -static void l2c_enable(void __iomem *base, u32 aux, unsigned num_lock) +static void l2c_enable(void __iomem *base, unsigned num_lock) { unsigned long flags; - /* Do not touch the controller if already enabled. */ - if (readl_relaxed(base + L2X0_CTRL) & L2X0_CTRL_EN) - return; - - l2x0_saved_regs.aux_ctrl = aux; - l2c_configure(base); + if (outer_cache.configure) + outer_cache.configure(&l2x0_saved_regs); + else + l2x0_data->configure(base); - l2c_unlock(base, num_lock); + l2x0_data->unlock(base, num_lock); local_irq_save(flags); __l2c_op_way(base + L2X0_INV_WAY); @@ -163,7 +154,11 @@ static void l2c_save(void __iomem *base) static void l2c_resume(void) { - l2c_enable(l2x0_base, l2x0_saved_regs.aux_ctrl, l2x0_data->num_lock); + void __iomem *base = l2x0_base; + + /* Do not touch the controller if already enabled. */ + if (!(readl_relaxed(base + L2X0_CTRL) & L2X0_CTRL_EN)) + l2c_enable(base, l2x0_data->num_lock); } /* @@ -252,6 +247,8 @@ static const struct l2c_init_data l2c210_data __initconst = { .num_lock = 1, .enable = l2c_enable, .save = l2c_save, + .configure = l2c_configure, + .unlock = l2c_unlock, .outer_cache = { .inv_range = l2c210_inv_range, .clean_range = l2c210_clean_range, @@ -391,16 +388,22 @@ static void l2c220_sync(void) raw_spin_unlock_irqrestore(&l2x0_lock, flags); } -static void l2c220_enable(void __iomem *base, u32 aux, unsigned num_lock) +static void l2c220_enable(void __iomem *base, unsigned num_lock) { /* * Always enable non-secure access to the lockdown registers - * we write to them as part of the L2C enable sequence so they * need to be accessible. */ - aux |= L220_AUX_CTRL_NS_LOCKDOWN; + l2x0_saved_regs.aux_ctrl |= L220_AUX_CTRL_NS_LOCKDOWN; - l2c_enable(base, aux, num_lock); + l2c_enable(base, num_lock); +} + +static void l2c220_unlock(void __iomem *base, unsigned num_lock) +{ + if (readl_relaxed(base + L2X0_AUX_CTRL) & L220_AUX_CTRL_NS_LOCKDOWN) + l2c_unlock(base, num_lock); } static const struct l2c_init_data l2c220_data = { @@ -409,6 +412,8 @@ static const struct l2c_init_data l2c220_data = { .num_lock = 1, .enable = l2c220_enable, .save = l2c_save, + .configure = l2c_configure, + .unlock = l2c220_unlock, .outer_cache = { .inv_range = l2c220_inv_range, .clean_range = l2c220_clean_range, @@ -569,6 +574,8 @@ static void l2c310_configure(void __iomem *base) { unsigned revision; + l2c_configure(base); + /* restore pl310 setup */ l2c_write_sec(l2x0_saved_regs.tag_latency, base, L310_TAG_LATENCY_CTRL); @@ -603,10 +610,11 @@ static int l2c310_cpu_enable_flz(struct notifier_block *nb, unsigned long act, v return NOTIFY_OK; } -static void __init l2c310_enable(void __iomem *base, u32 aux, unsigned num_lock) +static void __init l2c310_enable(void __iomem *base, unsigned num_lock) { unsigned rev = readl_relaxed(base + L2X0_CACHE_ID) & L2X0_CACHE_ID_RTL_MASK; bool cortex_a9 = read_cpuid_part() == ARM_CPU_PART_CORTEX_A9; + u32 aux = l2x0_saved_regs.aux_ctrl; if (rev >= L310_CACHE_ID_RTL_R2P0) { if (cortex_a9) { @@ -649,9 +657,9 @@ static void __init l2c310_enable(void __iomem *base, u32 aux, unsigned num_lock) * we write to them as part of the L2C enable sequence so they * need to be accessible. */ - aux |= L310_AUX_CTRL_NS_LOCKDOWN; + l2x0_saved_regs.aux_ctrl = aux | L310_AUX_CTRL_NS_LOCKDOWN; - l2c_enable(base, aux, num_lock); + l2c_enable(base, num_lock); /* Read back resulting AUX_CTRL value as it could have been altered. */ aux = readl_relaxed(base + L2X0_AUX_CTRL); @@ -755,6 +763,12 @@ static void l2c310_resume(void) set_auxcr(get_auxcr() | BIT(3) | BIT(2) | BIT(1)); } +static void l2c310_unlock(void __iomem *base, unsigned num_lock) +{ + if (readl_relaxed(base + L2X0_AUX_CTRL) & L310_AUX_CTRL_NS_LOCKDOWN) + l2c_unlock(base, num_lock); +} + static const struct l2c_init_data l2c310_init_fns __initconst = { .type = "L2C-310", .way_size_0 = SZ_8K, @@ -763,6 +777,7 @@ static const struct l2c_init_data l2c310_init_fns __initconst = { .fixup = l2c310_fixup, .save = l2c310_save, .configure = l2c310_configure, + .unlock = l2c310_unlock, .outer_cache = { .inv_range = l2c210_inv_range, .clean_range = l2c210_clean_range, @@ -856,8 +871,11 @@ static int __init __l2c_init(const struct l2c_init_data *data, * Check if l2x0 controller is already enabled. If we are booting * in non-secure mode accessing the below registers will fault. */ - if (!(readl_relaxed(l2x0_base + L2X0_CTRL) & L2X0_CTRL_EN)) - data->enable(l2x0_base, aux, data->num_lock); + if (!(readl_relaxed(l2x0_base + L2X0_CTRL) & L2X0_CTRL_EN)) { + l2x0_saved_regs.aux_ctrl = aux; + + data->enable(l2x0_base, data->num_lock); + } outer_cache = fns; @@ -1066,6 +1084,8 @@ static const struct l2c_init_data of_l2c210_data __initconst = { .of_parse = l2x0_of_parse, .enable = l2c_enable, .save = l2c_save, + .configure = l2c_configure, + .unlock = l2c_unlock, .outer_cache = { .inv_range = l2c210_inv_range, .clean_range = l2c210_clean_range, @@ -1084,6 +1104,8 @@ static const struct l2c_init_data of_l2c220_data __initconst = { .of_parse = l2x0_of_parse, .enable = l2c220_enable, .save = l2c_save, + .configure = l2c_configure, + .unlock = l2c220_unlock, .outer_cache = { .inv_range = l2c220_inv_range, .clean_range = l2c220_clean_range, @@ -1199,6 +1221,26 @@ static void __init l2c310_of_parse(const struct device_node *np, pr_err("L2C-310 OF arm,prefetch-offset property value is missing\n"); } + ret = of_property_read_u32(np, "prefetch-data", &val); + if (ret == 0) { + if (val) + prefetch |= L310_PREFETCH_CTRL_DATA_PREFETCH; + else + prefetch &= ~L310_PREFETCH_CTRL_DATA_PREFETCH; + } else if (ret != -EINVAL) { + pr_err("L2C-310 OF prefetch-data property value is missing\n"); + } + + ret = of_property_read_u32(np, "prefetch-instr", &val); + if (ret == 0) { + if (val) + prefetch |= L310_PREFETCH_CTRL_INSTR_PREFETCH; + else + prefetch &= ~L310_PREFETCH_CTRL_INSTR_PREFETCH; + } else if (ret != -EINVAL) { + pr_err("L2C-310 OF prefetch-instr property value is missing\n"); + } + l2x0_saved_regs.prefetch_ctrl = prefetch; } @@ -1211,6 +1253,7 @@ static const struct l2c_init_data of_l2c310_data __initconst = { .fixup = l2c310_fixup, .save = l2c310_save, .configure = l2c310_configure, + .unlock = l2c310_unlock, .outer_cache = { .inv_range = l2c210_inv_range, .clean_range = l2c210_clean_range, @@ -1240,6 +1283,7 @@ static const struct l2c_init_data of_l2c310_coherent_data __initconst = { .fixup = l2c310_fixup, .save = l2c310_save, .configure = l2c310_configure, + .unlock = l2c310_unlock, .outer_cache = { .inv_range = l2c210_inv_range, .clean_range = l2c210_clean_range, @@ -1366,7 +1410,7 @@ static void aurora_save(void __iomem *base) * For Aurora cache in no outer mode, enable via the CP15 coprocessor * broadcasting of cache commands to L2. */ -static void __init aurora_enable_no_outer(void __iomem *base, u32 aux, +static void __init aurora_enable_no_outer(void __iomem *base, unsigned num_lock) { u32 u; @@ -1377,7 +1421,7 @@ static void __init aurora_enable_no_outer(void __iomem *base, u32 aux, isb(); - l2c_enable(base, aux, num_lock); + l2c_enable(base, num_lock); } static void __init aurora_fixup(void __iomem *base, u32 cache_id, @@ -1416,6 +1460,8 @@ static const struct l2c_init_data of_aurora_with_outer_data __initconst = { .enable = l2c_enable, .fixup = aurora_fixup, .save = aurora_save, + .configure = l2c_configure, + .unlock = l2c_unlock, .outer_cache = { .inv_range = aurora_inv_range, .clean_range = aurora_clean_range, @@ -1435,6 +1481,8 @@ static const struct l2c_init_data of_aurora_no_outer_data __initconst = { .enable = aurora_enable_no_outer, .fixup = aurora_fixup, .save = aurora_save, + .configure = l2c_configure, + .unlock = l2c_unlock, .outer_cache = { .resume = l2c_resume, }, @@ -1585,6 +1633,7 @@ static const struct l2c_init_data of_bcm_l2x0_data __initconst = { .enable = l2c310_enable, .save = l2c310_save, .configure = l2c310_configure, + .unlock = l2c310_unlock, .outer_cache = { .inv_range = bcm_inv_range, .clean_range = bcm_clean_range, @@ -1608,6 +1657,7 @@ static void __init tauros3_save(void __iomem *base) static void tauros3_configure(void __iomem *base) { + l2c_configure(base); writel_relaxed(l2x0_saved_regs.aux2_ctrl, base + TAUROS3_AUX2_CTRL); writel_relaxed(l2x0_saved_regs.prefetch_ctrl, @@ -1621,6 +1671,7 @@ static const struct l2c_init_data of_tauros3_data __initconst = { .enable = l2c_enable, .save = tauros3_save, .configure = tauros3_configure, + .unlock = l2c_unlock, /* Tauros3 broadcasts L1 cache operations to L2 */ .outer_cache = { .resume = l2c_resume, diff --git a/arch/arm/mm/dma-mapping.c b/arch/arm/mm/dma-mapping.c index 6e4b9ff22..cba12f34f 100644 --- a/arch/arm/mm/dma-mapping.c +++ b/arch/arm/mm/dma-mapping.c @@ -148,11 +148,14 @@ static void *arm_coherent_dma_alloc(struct device *dev, size_t size, dma_addr_t *handle, gfp_t gfp, struct dma_attrs *attrs); static void arm_coherent_dma_free(struct device *dev, size_t size, void *cpu_addr, dma_addr_t handle, struct dma_attrs *attrs); +static int arm_coherent_dma_mmap(struct device *dev, struct vm_area_struct *vma, + void *cpu_addr, dma_addr_t dma_addr, size_t size, + struct dma_attrs *attrs); struct dma_map_ops arm_coherent_dma_ops = { .alloc = arm_coherent_dma_alloc, .free = arm_coherent_dma_free, - .mmap = arm_dma_mmap, + .mmap = arm_coherent_dma_mmap, .get_sgtable = arm_dma_get_sgtable, .map_page = arm_coherent_dma_map_page, .map_sg = arm_dma_map_sg, @@ -690,10 +693,7 @@ static void *arm_coherent_dma_alloc(struct device *dev, size_t size, attrs, __builtin_return_address(0)); } -/* - * Create userspace mapping for the DMA-coherent memory. - */ -int arm_dma_mmap(struct device *dev, struct vm_area_struct *vma, +static int __arm_dma_mmap(struct device *dev, struct vm_area_struct *vma, void *cpu_addr, dma_addr_t dma_addr, size_t size, struct dma_attrs *attrs) { @@ -704,8 +704,6 @@ int arm_dma_mmap(struct device *dev, struct vm_area_struct *vma, unsigned long pfn = dma_to_pfn(dev, dma_addr); unsigned long off = vma->vm_pgoff; - vma->vm_page_prot = __get_dma_pgprot(attrs, vma->vm_page_prot); - if (dma_mmap_from_coherent(dev, vma, cpu_addr, size, &ret)) return ret; @@ -721,6 +719,26 @@ int arm_dma_mmap(struct device *dev, struct vm_area_struct *vma, } /* + * Create userspace mapping for the DMA-coherent memory. + */ +static int arm_coherent_dma_mmap(struct device *dev, struct vm_area_struct *vma, + void *cpu_addr, dma_addr_t dma_addr, size_t size, + struct dma_attrs *attrs) +{ + return __arm_dma_mmap(dev, vma, cpu_addr, dma_addr, size, attrs); +} + +int arm_dma_mmap(struct device *dev, struct vm_area_struct *vma, + void *cpu_addr, dma_addr_t dma_addr, size_t size, + struct dma_attrs *attrs) +{ +#ifdef CONFIG_MMU + vma->vm_page_prot = __get_dma_pgprot(attrs, vma->vm_page_prot); +#endif /* CONFIG_MMU */ + return __arm_dma_mmap(dev, vma, cpu_addr, dma_addr, size, attrs); +} + +/* * Free a buffer as defined by the above mapping. */ static void __arm_dma_free(struct device *dev, size_t size, void *cpu_addr, diff --git a/arch/arm/mm/fault.c b/arch/arm/mm/fault.c index 6333d9c17..0d629b8f9 100644 --- a/arch/arm/mm/fault.c +++ b/arch/arm/mm/fault.c @@ -276,7 +276,7 @@ do_page_fault(unsigned long addr, unsigned int fsr, struct pt_regs *regs) * If we're in an interrupt or have no user * context, we must not take the fault.. */ - if (in_atomic() || !mm) + if (faulthandler_disabled() || !mm) goto no_context; if (user_mode(regs)) diff --git a/arch/arm/mm/highmem.c b/arch/arm/mm/highmem.c index b98895d9f..ee8dfa793 100644 --- a/arch/arm/mm/highmem.c +++ b/arch/arm/mm/highmem.c @@ -59,6 +59,7 @@ void *kmap_atomic(struct page *page) void *kmap; int type; + preempt_disable(); pagefault_disable(); if (!PageHighMem(page)) return page_address(page); @@ -121,6 +122,7 @@ void __kunmap_atomic(void *kvaddr) kunmap_high(pte_page(pkmap_page_table[PKMAP_NR(vaddr)])); } pagefault_enable(); + preempt_enable(); } EXPORT_SYMBOL(__kunmap_atomic); @@ -130,6 +132,7 @@ void *kmap_atomic_pfn(unsigned long pfn) int idx, type; struct page *page = pfn_to_page(pfn); + preempt_disable(); pagefault_disable(); if (!PageHighMem(page)) return page_address(page); diff --git a/arch/arm/mm/hugetlbpage.c b/arch/arm/mm/hugetlbpage.c index c72412415..fcafb521f 100644 --- a/arch/arm/mm/hugetlbpage.c +++ b/arch/arm/mm/hugetlbpage.c @@ -41,11 +41,6 @@ int pud_huge(pud_t pud) return 0; } -int huge_pmd_unshare(struct mm_struct *mm, unsigned long *addr, pte_t *ptep) -{ - return 0; -} - int pmd_huge(pmd_t pmd) { return pmd_val(pmd) && !(pmd_val(pmd) & PMD_TABLE_BIT); diff --git a/arch/arm/mm/init.c b/arch/arm/mm/init.c index be92fa0f2..8a63b4cdc 100644 --- a/arch/arm/mm/init.c +++ b/arch/arm/mm/init.c @@ -268,6 +268,7 @@ void __init arm_memblock_init(const struct machine_desc *mdesc) if (mdesc->reserve) mdesc->reserve(); + early_init_fdt_reserve_self(); early_init_fdt_scan_reserved_mem(); /* reserve memory for DMA contiguous allocations */ diff --git a/arch/arm/mm/ioremap.c b/arch/arm/mm/ioremap.c index d1e5ad7ab..0c81056c1 100644 --- a/arch/arm/mm/ioremap.c +++ b/arch/arm/mm/ioremap.c @@ -255,7 +255,7 @@ remap_area_supersections(unsigned long virt, unsigned long pfn, } #endif -void __iomem * __arm_ioremap_pfn_caller(unsigned long pfn, +static void __iomem * __arm_ioremap_pfn_caller(unsigned long pfn, unsigned long offset, size_t size, unsigned int mtype, void *caller) { const struct mem_type *type; @@ -363,7 +363,7 @@ __arm_ioremap_pfn(unsigned long pfn, unsigned long offset, size_t size, unsigned int mtype) { return __arm_ioremap_pfn_caller(pfn, offset, size, mtype, - __builtin_return_address(0)); + __builtin_return_address(0)); } EXPORT_SYMBOL(__arm_ioremap_pfn); @@ -371,13 +371,26 @@ void __iomem * (*arch_ioremap_caller)(phys_addr_t, size_t, unsigned int, void *) = __arm_ioremap_caller; -void __iomem * -__arm_ioremap(phys_addr_t phys_addr, size_t size, unsigned int mtype) +void __iomem *ioremap(resource_size_t res_cookie, size_t size) +{ + return arch_ioremap_caller(res_cookie, size, MT_DEVICE, + __builtin_return_address(0)); +} +EXPORT_SYMBOL(ioremap); + +void __iomem *ioremap_cache(resource_size_t res_cookie, size_t size) +{ + return arch_ioremap_caller(res_cookie, size, MT_DEVICE_CACHED, + __builtin_return_address(0)); +} +EXPORT_SYMBOL(ioremap_cache); + +void __iomem *ioremap_wc(resource_size_t res_cookie, size_t size) { - return arch_ioremap_caller(phys_addr, size, mtype, - __builtin_return_address(0)); + return arch_ioremap_caller(res_cookie, size, MT_DEVICE_WC, + __builtin_return_address(0)); } -EXPORT_SYMBOL(__arm_ioremap); +EXPORT_SYMBOL(ioremap_wc); /* * Remap an arbitrary physical address space into the kernel virtual @@ -431,11 +444,11 @@ void __iounmap(volatile void __iomem *io_addr) void (*arch_iounmap)(volatile void __iomem *) = __iounmap; -void __arm_iounmap(volatile void __iomem *io_addr) +void iounmap(volatile void __iomem *cookie) { - arch_iounmap(io_addr); + arch_iounmap(cookie); } -EXPORT_SYMBOL(__arm_iounmap); +EXPORT_SYMBOL(iounmap); #ifdef CONFIG_PCI static int pci_ioremap_mem_type = MT_DEVICE; diff --git a/arch/arm/mm/mmu.c b/arch/arm/mm/mmu.c index 718638267..870838a46 100644 --- a/arch/arm/mm/mmu.c +++ b/arch/arm/mm/mmu.c @@ -1072,6 +1072,7 @@ void __init sanity_check_meminfo(void) int highmem = 0; phys_addr_t vmalloc_limit = __pa(vmalloc_min - 1) + 1; struct memblock_region *reg; + bool should_use_highmem = false; for_each_memblock(memory, reg) { phys_addr_t block_start = reg->base; @@ -1090,6 +1091,7 @@ void __init sanity_check_meminfo(void) pr_notice("Ignoring RAM at %pa-%pa (!CONFIG_HIGHMEM)\n", &block_start, &block_end); memblock_remove(reg->base, reg->size); + should_use_highmem = true; continue; } @@ -1100,6 +1102,7 @@ void __init sanity_check_meminfo(void) &block_start, &block_end, &vmalloc_limit); memblock_remove(vmalloc_limit, overlap_size); block_end = vmalloc_limit; + should_use_highmem = true; } } @@ -1134,6 +1137,9 @@ void __init sanity_check_meminfo(void) } } + if (should_use_highmem) + pr_notice("Consider using a HIGHMEM enabled kernel.\n"); + high_memory = __va(arm_lowmem_limit - 1) + 1; /* @@ -1387,123 +1393,98 @@ static void __init map_lowmem(void) } } -#ifdef CONFIG_ARM_LPAE +#ifdef CONFIG_ARM_PV_FIXUP +extern unsigned long __atags_pointer; +typedef void pgtables_remap(long long offset, unsigned long pgd, void *bdata); +pgtables_remap lpae_pgtables_remap_asm; + /* * early_paging_init() recreates boot time page table setup, allowing machines * to switch over to a high (>4G) address space on LPAE systems */ -void __init early_paging_init(const struct machine_desc *mdesc, - struct proc_info_list *procinfo) +void __init early_paging_init(const struct machine_desc *mdesc) { - pmdval_t pmdprot = procinfo->__cpu_mm_mmu_flags; - unsigned long map_start, map_end; - pgd_t *pgd0, *pgdk; - pud_t *pud0, *pudk, *pud_start; - pmd_t *pmd0, *pmdk; - phys_addr_t phys; - int i; + pgtables_remap *lpae_pgtables_remap; + unsigned long pa_pgd; + unsigned int cr, ttbcr; + long long offset; + void *boot_data; - if (!(mdesc->init_meminfo)) + if (!mdesc->pv_fixup) return; - /* remap kernel code and data */ - map_start = init_mm.start_code & PMD_MASK; - map_end = ALIGN(init_mm.brk, PMD_SIZE); + offset = mdesc->pv_fixup(); + if (offset == 0) + return; - /* get a handle on things... */ - pgd0 = pgd_offset_k(0); - pud_start = pud0 = pud_offset(pgd0, 0); - pmd0 = pmd_offset(pud0, 0); + /* + * Get the address of the remap function in the 1:1 identity + * mapping setup by the early page table assembly code. We + * must get this prior to the pv update. The following barrier + * ensures that this is complete before we fixup any P:V offsets. + */ + lpae_pgtables_remap = (pgtables_remap *)(unsigned long)__pa(lpae_pgtables_remap_asm); + pa_pgd = __pa(swapper_pg_dir); + boot_data = __va(__atags_pointer); + barrier(); - pgdk = pgd_offset_k(map_start); - pudk = pud_offset(pgdk, map_start); - pmdk = pmd_offset(pudk, map_start); + pr_info("Switching physical address space to 0x%08llx\n", + (u64)PHYS_OFFSET + offset); - mdesc->init_meminfo(); + /* Re-set the phys pfn offset, and the pv offset */ + __pv_offset += offset; + __pv_phys_pfn_offset += PFN_DOWN(offset); /* Run the patch stub to update the constants */ fixup_pv_table(&__pv_table_begin, (&__pv_table_end - &__pv_table_begin) << 2); /* - * Cache cleaning operations for self-modifying code - * We should clean the entries by MVA but running a - * for loop over every pv_table entry pointer would - * just complicate the code. - */ - flush_cache_louis(); - dsb(ishst); - isb(); - - /* - * FIXME: This code is not architecturally compliant: we modify - * the mappings in-place, indeed while they are in use by this - * very same code. This may lead to unpredictable behaviour of - * the CPU. - * - * Even modifying the mappings in a separate page table does - * not resolve this. - * - * The architecture strongly recommends that when a mapping is - * changed, that it is changed by first going via an invalid - * mapping and back to the new mapping. This is to ensure that - * no TLB conflicts (caused by the TLB having more than one TLB - * entry match a translation) can occur. However, doing that - * here will result in unmapping the code we are running. - */ - pr_warn("WARNING: unsafe modification of in-place page tables - tainting kernel\n"); - add_taint(TAINT_CPU_OUT_OF_SPEC, LOCKDEP_STILL_OK); - - /* - * Remap level 1 table. This changes the physical addresses - * used to refer to the level 2 page tables to the high - * physical address alias, leaving everything else the same. - */ - for (i = 0; i < PTRS_PER_PGD; pud0++, i++) { - set_pud(pud0, - __pud(__pa(pmd0) | PMD_TYPE_TABLE | L_PGD_SWAPPER)); - pmd0 += PTRS_PER_PMD; - } - - /* - * Remap the level 2 table, pointing the mappings at the high - * physical address alias of these pages. - */ - phys = __pa(map_start); - do { - *pmdk++ = __pmd(phys | pmdprot); - phys += PMD_SIZE; - } while (phys < map_end); - - /* - * Ensure that the above updates are flushed out of the cache. - * This is not strictly correct; on a system where the caches - * are coherent with each other, but the MMU page table walks - * may not be coherent, flush_cache_all() may be a no-op, and - * this will fail. + * We changing not only the virtual to physical mapping, but also + * the physical addresses used to access memory. We need to flush + * all levels of cache in the system with caching disabled to + * ensure that all data is written back, and nothing is prefetched + * into the caches. We also need to prevent the TLB walkers + * allocating into the caches too. Note that this is ARMv7 LPAE + * specific. */ + cr = get_cr(); + set_cr(cr & ~(CR_I | CR_C)); + asm("mrc p15, 0, %0, c2, c0, 2" : "=r" (ttbcr)); + asm volatile("mcr p15, 0, %0, c2, c0, 2" + : : "r" (ttbcr & ~(3 << 8 | 3 << 10))); flush_cache_all(); /* - * Re-write the TTBR values to point them at the high physical - * alias of the page tables. We expect __va() will work on - * cpu_get_pgd(), which returns the value of TTBR0. + * Fixup the page tables - this must be in the idmap region as + * we need to disable the MMU to do this safely, and hence it + * needs to be assembly. It's fairly simple, as we're using the + * temporary tables setup by the initial assembly code. */ - cpu_switch_mm(pgd0, &init_mm); - cpu_set_ttbr(1, __pa(pgd0) + TTBR1_OFFSET); + lpae_pgtables_remap(offset, pa_pgd, boot_data); - /* Finally flush any stale TLB values. */ - local_flush_bp_all(); - local_flush_tlb_all(); + /* Re-enable the caches and cacheable TLB walks */ + asm volatile("mcr p15, 0, %0, c2, c0, 2" : : "r" (ttbcr)); + set_cr(cr); } #else -void __init early_paging_init(const struct machine_desc *mdesc, - struct proc_info_list *procinfo) +void __init early_paging_init(const struct machine_desc *mdesc) { - if (mdesc->init_meminfo) - mdesc->init_meminfo(); + long long offset; + + if (!mdesc->pv_fixup) + return; + + offset = mdesc->pv_fixup(); + if (offset == 0) + return; + + pr_crit("Physical address space modification is only to support Keystone2.\n"); + pr_crit("Please enable ARM_LPAE and ARM_PATCH_PHYS_VIRT support to use this\n"); + pr_crit("feature. Your kernel may crash now, have a good day.\n"); + add_taint(TAINT_CPU_OUT_OF_SPEC, LOCKDEP_STILL_OK); } #endif @@ -1519,6 +1500,7 @@ void __init paging_init(const struct machine_desc *mdesc) build_mem_type_table(); prepare_page_table(); map_lowmem(); + memblock_set_current_limit(arm_lowmem_limit); dma_contiguous_remap(); devicemaps_init(mdesc); kmap_init(); diff --git a/arch/arm/mm/nommu.c b/arch/arm/mm/nommu.c index a014dfacd..1dd10936d 100644 --- a/arch/arm/mm/nommu.c +++ b/arch/arm/mm/nommu.c @@ -304,15 +304,6 @@ void __init sanity_check_meminfo(void) } /* - * early_paging_init() recreates boot time page table setup, allowing machines - * to switch over to a high (>4G) address space on LPAE systems - */ -void __init early_paging_init(const struct machine_desc *mdesc, - struct proc_info_list *procinfo) -{ -} - -/* * paging_init() sets up the page tables, initialises the zone memory * maps, and sets up the zero page, bad page and bad page tables. */ @@ -360,30 +351,43 @@ void __iomem *__arm_ioremap_pfn(unsigned long pfn, unsigned long offset, } EXPORT_SYMBOL(__arm_ioremap_pfn); -void __iomem *__arm_ioremap_pfn_caller(unsigned long pfn, unsigned long offset, - size_t size, unsigned int mtype, void *caller) +void __iomem *__arm_ioremap_caller(phys_addr_t phys_addr, size_t size, + unsigned int mtype, void *caller) { - return __arm_ioremap_pfn(pfn, offset, size, mtype); + return (void __iomem *)phys_addr; } -void __iomem *__arm_ioremap(phys_addr_t phys_addr, size_t size, - unsigned int mtype) +void __iomem * (*arch_ioremap_caller)(phys_addr_t, size_t, unsigned int, void *); + +void __iomem *ioremap(resource_size_t res_cookie, size_t size) { - return (void __iomem *)phys_addr; + return __arm_ioremap_caller(res_cookie, size, MT_DEVICE, + __builtin_return_address(0)); } -EXPORT_SYMBOL(__arm_ioremap); +EXPORT_SYMBOL(ioremap); -void __iomem * (*arch_ioremap_caller)(phys_addr_t, size_t, unsigned int, void *); +void __iomem *ioremap_cache(resource_size_t res_cookie, size_t size) +{ + return __arm_ioremap_caller(res_cookie, size, MT_DEVICE_CACHED, + __builtin_return_address(0)); +} +EXPORT_SYMBOL(ioremap_cache); -void __iomem *__arm_ioremap_caller(phys_addr_t phys_addr, size_t size, - unsigned int mtype, void *caller) +void __iomem *ioremap_wc(resource_size_t res_cookie, size_t size) +{ + return __arm_ioremap_caller(res_cookie, size, MT_DEVICE_WC, + __builtin_return_address(0)); +} +EXPORT_SYMBOL(ioremap_wc); + +void __iounmap(volatile void __iomem *addr) { - return __arm_ioremap(phys_addr, size, mtype); } +EXPORT_SYMBOL(__iounmap); void (*arch_iounmap)(volatile void __iomem *); -void __arm_iounmap(volatile void __iomem *addr) +void iounmap(volatile void __iomem *addr) { } -EXPORT_SYMBOL(__arm_iounmap); +EXPORT_SYMBOL(iounmap); diff --git a/arch/arm/mm/proc-v7-2level.S b/arch/arm/mm/proc-v7-2level.S index 10405b8d3..c6141a543 100644 --- a/arch/arm/mm/proc-v7-2level.S +++ b/arch/arm/mm/proc-v7-2level.S @@ -36,14 +36,16 @@ * * It is assumed that: * - we are not using split page tables + * + * Note that we always need to flush BTAC/BTB if IBE is set + * even on Cortex-A8 revisions not affected by 430973. + * If IBE is not set, the flush BTAC/BTB won't do anything. */ ENTRY(cpu_ca8_switch_mm) #ifdef CONFIG_MMU mov r2, #0 -#ifdef CONFIG_ARM_ERRATA_430973 mcr p15, 0, r2, c7, c5, 6 @ flush BTAC/BTB #endif -#endif ENTRY(cpu_v7_switch_mm) #ifdef CONFIG_MMU mmid r1, r1 @ get mm->context.id @@ -148,10 +150,10 @@ ENDPROC(cpu_v7_set_pte_ext) * Macro for setting up the TTBRx and TTBCR registers. * - \ttb0 and \ttb1 updated with the corresponding flags. */ - .macro v7_ttb_setup, zero, ttbr0, ttbr1, tmp + .macro v7_ttb_setup, zero, ttbr0l, ttbr0h, ttbr1, tmp mcr p15, 0, \zero, c2, c0, 2 @ TTB control register - ALT_SMP(orr \ttbr0, \ttbr0, #TTB_FLAGS_SMP) - ALT_UP(orr \ttbr0, \ttbr0, #TTB_FLAGS_UP) + ALT_SMP(orr \ttbr0l, \ttbr0l, #TTB_FLAGS_SMP) + ALT_UP(orr \ttbr0l, \ttbr0l, #TTB_FLAGS_UP) ALT_SMP(orr \ttbr1, \ttbr1, #TTB_FLAGS_SMP) ALT_UP(orr \ttbr1, \ttbr1, #TTB_FLAGS_UP) mcr p15, 0, \ttbr1, c2, c0, 1 @ load TTB1 diff --git a/arch/arm/mm/proc-v7-3level.S b/arch/arm/mm/proc-v7-3level.S index d3daed0ae..5e5720e8b 100644 --- a/arch/arm/mm/proc-v7-3level.S +++ b/arch/arm/mm/proc-v7-3level.S @@ -126,11 +126,10 @@ ENDPROC(cpu_v7_set_pte_ext) * Macro for setting up the TTBRx and TTBCR registers. * - \ttbr1 updated. */ - .macro v7_ttb_setup, zero, ttbr0, ttbr1, tmp + .macro v7_ttb_setup, zero, ttbr0l, ttbr0h, ttbr1, tmp ldr \tmp, =swapper_pg_dir @ swapper_pg_dir virtual address - mov \tmp, \tmp, lsr #ARCH_PGD_SHIFT - cmp \ttbr1, \tmp @ PHYS_OFFSET > PAGE_OFFSET? - mrc p15, 0, \tmp, c2, c0, 2 @ TTB control register + cmp \ttbr1, \tmp, lsr #12 @ PHYS_OFFSET > PAGE_OFFSET? + mrc p15, 0, \tmp, c2, c0, 2 @ TTB control egister orr \tmp, \tmp, #TTB_EAE ALT_SMP(orr \tmp, \tmp, #TTB_FLAGS_SMP) ALT_UP(orr \tmp, \tmp, #TTB_FLAGS_UP) @@ -143,13 +142,10 @@ ENDPROC(cpu_v7_set_pte_ext) */ orrls \tmp, \tmp, #TTBR1_SIZE @ TTBCR.T1SZ mcr p15, 0, \tmp, c2, c0, 2 @ TTBCR - mov \tmp, \ttbr1, lsr #(32 - ARCH_PGD_SHIFT) @ upper bits - mov \ttbr1, \ttbr1, lsl #ARCH_PGD_SHIFT @ lower bits + mov \tmp, \ttbr1, lsr #20 + mov \ttbr1, \ttbr1, lsl #12 addls \ttbr1, \ttbr1, #TTBR1_OFFSET mcrr p15, 1, \ttbr1, \tmp, c2 @ load TTBR1 - mov \tmp, \ttbr0, lsr #(32 - ARCH_PGD_SHIFT) @ upper bits - mov \ttbr0, \ttbr0, lsl #ARCH_PGD_SHIFT @ lower bits - mcrr p15, 0, \ttbr0, \tmp, c2 @ load TTBR0 .endm /* diff --git a/arch/arm/mm/proc-v7.S b/arch/arm/mm/proc-v7.S index 3d1054f11..de2b246fe 100644 --- a/arch/arm/mm/proc-v7.S +++ b/arch/arm/mm/proc-v7.S @@ -252,6 +252,12 @@ ENDPROC(cpu_pj4b_do_resume) * Initialise TLB, Caches, and MMU state ready to switch the MMU * on. Return in r0 the new CP15 C1 control register setting. * + * r1, r2, r4, r5, r9, r13 must be preserved - r13 is not a stack + * r4: TTBR0 (low word) + * r5: TTBR0 (high word if LPAE) + * r8: TTBR1 + * r9: Main ID register + * * This should be able to cover all ARMv7 cores. * * It is assumed that: @@ -268,7 +274,10 @@ __v7_ca15mp_setup: __v7_b15mp_setup: __v7_ca17mp_setup: mov r10, #0 -1: +1: adr r12, __v7_setup_stack @ the local stack + stmia r12, {r0-r5, lr} @ v7_invalidate_l1 touches r0-r6 + bl v7_invalidate_l1 + ldmia r12, {r0-r5, lr} #ifdef CONFIG_SMP ALT_SMP(mrc p15, 0, r0, c1, c0, 1) ALT_UP(mov r0, #(1 << 6)) @ fake it for UP @@ -277,7 +286,79 @@ __v7_ca17mp_setup: orreq r0, r0, r10 @ Enable CPU-specific SMP bits mcreq p15, 0, r0, c1, c0, 1 #endif - b __v7_setup + b __v7_setup_cont + +/* + * Errata: + * r0, r10 available for use + * r1, r2, r4, r5, r9, r13: must be preserved + * r3: contains MIDR rX number in bits 23-20 + * r6: contains MIDR rXpY as 8-bit XY number + * r9: MIDR + */ +__ca8_errata: +#if defined(CONFIG_ARM_ERRATA_430973) && !defined(CONFIG_ARCH_MULTIPLATFORM) + teq r3, #0x00100000 @ only present in r1p* + mrceq p15, 0, r0, c1, c0, 1 @ read aux control register + orreq r0, r0, #(1 << 6) @ set IBE to 1 + mcreq p15, 0, r0, c1, c0, 1 @ write aux control register +#endif +#ifdef CONFIG_ARM_ERRATA_458693 + teq r6, #0x20 @ only present in r2p0 + mrceq p15, 0, r0, c1, c0, 1 @ read aux control register + orreq r0, r0, #(1 << 5) @ set L1NEON to 1 + orreq r0, r0, #(1 << 9) @ set PLDNOP to 1 + mcreq p15, 0, r0, c1, c0, 1 @ write aux control register +#endif +#ifdef CONFIG_ARM_ERRATA_460075 + teq r6, #0x20 @ only present in r2p0 + mrceq p15, 1, r0, c9, c0, 2 @ read L2 cache aux ctrl register + tsteq r0, #1 << 22 + orreq r0, r0, #(1 << 22) @ set the Write Allocate disable bit + mcreq p15, 1, r0, c9, c0, 2 @ write the L2 cache aux ctrl register +#endif + b __errata_finish + +__ca9_errata: +#ifdef CONFIG_ARM_ERRATA_742230 + cmp r6, #0x22 @ only present up to r2p2 + mrcle p15, 0, r0, c15, c0, 1 @ read diagnostic register + orrle r0, r0, #1 << 4 @ set bit #4 + mcrle p15, 0, r0, c15, c0, 1 @ write diagnostic register +#endif +#ifdef CONFIG_ARM_ERRATA_742231 + teq r6, #0x20 @ present in r2p0 + teqne r6, #0x21 @ present in r2p1 + teqne r6, #0x22 @ present in r2p2 + mrceq p15, 0, r0, c15, c0, 1 @ read diagnostic register + orreq r0, r0, #1 << 12 @ set bit #12 + orreq r0, r0, #1 << 22 @ set bit #22 + mcreq p15, 0, r0, c15, c0, 1 @ write diagnostic register +#endif +#ifdef CONFIG_ARM_ERRATA_743622 + teq r3, #0x00200000 @ only present in r2p* + mrceq p15, 0, r0, c15, c0, 1 @ read diagnostic register + orreq r0, r0, #1 << 6 @ set bit #6 + mcreq p15, 0, r0, c15, c0, 1 @ write diagnostic register +#endif +#if defined(CONFIG_ARM_ERRATA_751472) && defined(CONFIG_SMP) + ALT_SMP(cmp r6, #0x30) @ present prior to r3p0 + ALT_UP_B(1f) + mrclt p15, 0, r0, c15, c0, 1 @ read diagnostic register + orrlt r0, r0, #1 << 11 @ set bit #11 + mcrlt p15, 0, r0, c15, c0, 1 @ write diagnostic register +1: +#endif + b __errata_finish + +__ca15_errata: +#ifdef CONFIG_ARM_ERRATA_773022 + cmp r6, #0x4 @ only present up to r0p4 + mrcle p15, 0, r0, c1, c0, 1 @ read aux control register + orrle r0, r0, #1 << 1 @ disable loop buffer + mcrle p15, 0, r0, c1, c0, 1 @ write aux control register +#endif + b __errata_finish __v7_pj4b_setup: #ifdef CONFIG_CPU_PJ4B @@ -335,100 +416,43 @@ __v7_pj4b_setup: __v7_setup: adr r12, __v7_setup_stack @ the local stack - stmia r12, {r0-r5, r7, r9, r11, lr} - bl v7_flush_dcache_louis - ldmia r12, {r0-r5, r7, r9, r11, lr} - - mrc p15, 0, r0, c0, c0, 0 @ read main ID register - and r10, r0, #0xff000000 @ ARM? - teq r10, #0x41000000 - bne 3f - and r5, r0, #0x00f00000 @ variant - and r6, r0, #0x0000000f @ revision - orr r6, r6, r5, lsr #20-4 @ combine variant and revision - ubfx r0, r0, #4, #12 @ primary part number + stmia r12, {r0-r5, lr} @ v7_invalidate_l1 touches r0-r6 + bl v7_invalidate_l1 + ldmia r12, {r0-r5, lr} + +__v7_setup_cont: + and r0, r9, #0xff000000 @ ARM? + teq r0, #0x41000000 + bne __errata_finish + and r3, r9, #0x00f00000 @ variant + and r6, r9, #0x0000000f @ revision + orr r6, r6, r3, lsr #20-4 @ combine variant and revision + ubfx r0, r9, #4, #12 @ primary part number /* Cortex-A8 Errata */ ldr r10, =0x00000c08 @ Cortex-A8 primary part number teq r0, r10 - bne 2f -#if defined(CONFIG_ARM_ERRATA_430973) && !defined(CONFIG_ARCH_MULTIPLATFORM) - - teq r5, #0x00100000 @ only present in r1p* - mrceq p15, 0, r10, c1, c0, 1 @ read aux control register - orreq r10, r10, #(1 << 6) @ set IBE to 1 - mcreq p15, 0, r10, c1, c0, 1 @ write aux control register -#endif -#ifdef CONFIG_ARM_ERRATA_458693 - teq r6, #0x20 @ only present in r2p0 - mrceq p15, 0, r10, c1, c0, 1 @ read aux control register - orreq r10, r10, #(1 << 5) @ set L1NEON to 1 - orreq r10, r10, #(1 << 9) @ set PLDNOP to 1 - mcreq p15, 0, r10, c1, c0, 1 @ write aux control register -#endif -#ifdef CONFIG_ARM_ERRATA_460075 - teq r6, #0x20 @ only present in r2p0 - mrceq p15, 1, r10, c9, c0, 2 @ read L2 cache aux ctrl register - tsteq r10, #1 << 22 - orreq r10, r10, #(1 << 22) @ set the Write Allocate disable bit - mcreq p15, 1, r10, c9, c0, 2 @ write the L2 cache aux ctrl register -#endif - b 3f + beq __ca8_errata /* Cortex-A9 Errata */ -2: ldr r10, =0x00000c09 @ Cortex-A9 primary part number + ldr r10, =0x00000c09 @ Cortex-A9 primary part number teq r0, r10 - bne 3f -#ifdef CONFIG_ARM_ERRATA_742230 - cmp r6, #0x22 @ only present up to r2p2 - mrcle p15, 0, r10, c15, c0, 1 @ read diagnostic register - orrle r10, r10, #1 << 4 @ set bit #4 - mcrle p15, 0, r10, c15, c0, 1 @ write diagnostic register -#endif -#ifdef CONFIG_ARM_ERRATA_742231 - teq r6, #0x20 @ present in r2p0 - teqne r6, #0x21 @ present in r2p1 - teqne r6, #0x22 @ present in r2p2 - mrceq p15, 0, r10, c15, c0, 1 @ read diagnostic register - orreq r10, r10, #1 << 12 @ set bit #12 - orreq r10, r10, #1 << 22 @ set bit #22 - mcreq p15, 0, r10, c15, c0, 1 @ write diagnostic register -#endif -#ifdef CONFIG_ARM_ERRATA_743622 - teq r5, #0x00200000 @ only present in r2p* - mrceq p15, 0, r10, c15, c0, 1 @ read diagnostic register - orreq r10, r10, #1 << 6 @ set bit #6 - mcreq p15, 0, r10, c15, c0, 1 @ write diagnostic register -#endif -#if defined(CONFIG_ARM_ERRATA_751472) && defined(CONFIG_SMP) - ALT_SMP(cmp r6, #0x30) @ present prior to r3p0 - ALT_UP_B(1f) - mrclt p15, 0, r10, c15, c0, 1 @ read diagnostic register - orrlt r10, r10, #1 << 11 @ set bit #11 - mcrlt p15, 0, r10, c15, c0, 1 @ write diagnostic register -1: -#endif + beq __ca9_errata /* Cortex-A15 Errata */ -3: ldr r10, =0x00000c0f @ Cortex-A15 primary part number + ldr r10, =0x00000c0f @ Cortex-A15 primary part number teq r0, r10 - bne 4f + beq __ca15_errata -#ifdef CONFIG_ARM_ERRATA_773022 - cmp r6, #0x4 @ only present up to r0p4 - mrcle p15, 0, r10, c1, c0, 1 @ read aux control register - orrle r10, r10, #1 << 1 @ disable loop buffer - mcrle p15, 0, r10, c1, c0, 1 @ write aux control register -#endif - -4: mov r10, #0 +__errata_finish: + mov r10, #0 mcr p15, 0, r10, c7, c5, 0 @ I+BTB cache invalidate #ifdef CONFIG_MMU mcr p15, 0, r10, c8, c7, 0 @ invalidate I + D TLBs - v7_ttb_setup r10, r4, r8, r5 @ TTBCR, TTBRx setup - ldr r5, =PRRR @ PRRR + v7_ttb_setup r10, r4, r5, r8, r3 @ TTBCR, TTBRx setup + ldr r3, =PRRR @ PRRR ldr r6, =NMRR @ NMRR - mcr p15, 0, r5, c10, c2, 0 @ write PRRR + mcr p15, 0, r3, c10, c2, 0 @ write PRRR mcr p15, 0, r6, c10, c2, 1 @ write NMRR #endif dsb @ Complete invalidations @@ -437,22 +461,22 @@ __v7_setup: and r0, r0, #(0xf << 12) @ ThumbEE enabled field teq r0, #(1 << 12) @ check if ThumbEE is present bne 1f - mov r5, #0 - mcr p14, 6, r5, c1, c0, 0 @ Initialize TEEHBR to 0 + mov r3, #0 + mcr p14, 6, r3, c1, c0, 0 @ Initialize TEEHBR to 0 mrc p14, 6, r0, c0, c0, 0 @ load TEECR orr r0, r0, #1 @ set the 1st bit in order to mcr p14, 6, r0, c0, c0, 0 @ stop userspace TEEHBR access 1: #endif - adr r5, v7_crval - ldmia r5, {r5, r6} + adr r3, v7_crval + ldmia r3, {r3, r6} ARM_BE8(orr r6, r6, #1 << 25) @ big-endian page tables #ifdef CONFIG_SWP_EMULATE - orr r5, r5, #(1 << 10) @ set SW bit in "clear" + orr r3, r3, #(1 << 10) @ set SW bit in "clear" bic r6, r6, #(1 << 10) @ clear it in "mmuset" #endif mrc p15, 0, r0, c1, c0, 0 @ read control register - bic r0, r0, r5 @ clear bits them + bic r0, r0, r3 @ clear bits them orr r0, r0, r6 @ set them THUMB( orr r0, r0, #1 << 30 ) @ Thumb exceptions ret lr @ return to head.S:__ret @@ -460,7 +484,7 @@ ENDPROC(__v7_setup) .align 2 __v7_setup_stack: - .space 4 * 11 @ 11 registers + .space 4 * 7 @ 12 registers __INITDATA diff --git a/arch/arm/mm/proc-v7m.S b/arch/arm/mm/proc-v7m.S index e08e1f2ba..67d920907 100644 --- a/arch/arm/mm/proc-v7m.S +++ b/arch/arm/mm/proc-v7m.S @@ -98,7 +98,7 @@ __v7m_setup: str r5, [r0, V7M_SCB_SHPR3] @ set PendSV priority @ SVC to run the kernel in this mode - adr r1, BSYM(1f) + badr r1, 1f ldr r5, [r12, #11 * 4] @ read the SVC vector entry str r1, [r12, #11 * 4] @ write the temporary SVC vector entry mov r6, lr @ save LR diff --git a/arch/arm/mm/pv-fixup-asm.S b/arch/arm/mm/pv-fixup-asm.S new file mode 100644 index 000000000..1867f3e43 --- /dev/null +++ b/arch/arm/mm/pv-fixup-asm.S @@ -0,0 +1,88 @@ +/* + * Copyright (C) 2015 Russell King + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This assembly is required to safely remap the physical address space + * for Keystone 2 + */ +#include <linux/linkage.h> +#include <asm/asm-offsets.h> +#include <asm/cp15.h> +#include <asm/memory.h> +#include <asm/pgtable.h> + + .section ".idmap.text", "ax" + +#define L1_ORDER 3 +#define L2_ORDER 3 + +ENTRY(lpae_pgtables_remap_asm) + stmfd sp!, {r4-r8, lr} + + mrc p15, 0, r8, c1, c0, 0 @ read control reg + bic ip, r8, #CR_M @ disable caches and MMU + mcr p15, 0, ip, c1, c0, 0 + dsb + isb + + /* Update level 2 entries covering the kernel */ + ldr r6, =(_end - 1) + add r7, r2, #0x1000 + add r6, r7, r6, lsr #SECTION_SHIFT - L2_ORDER + add r7, r7, #PAGE_OFFSET >> (SECTION_SHIFT - L2_ORDER) +1: ldrd r4, [r7] + adds r4, r4, r0 + adc r5, r5, r1 + strd r4, [r7], #1 << L2_ORDER + cmp r7, r6 + bls 1b + + /* Update level 2 entries for the boot data */ + add r7, r2, #0x1000 + add r7, r7, r3, lsr #SECTION_SHIFT - L2_ORDER + bic r7, r7, #(1 << L2_ORDER) - 1 + ldrd r4, [r7] + adds r4, r4, r0 + adc r5, r5, r1 + strd r4, [r7], #1 << L2_ORDER + ldrd r4, [r7] + adds r4, r4, r0 + adc r5, r5, r1 + strd r4, [r7] + + /* Update level 1 entries */ + mov r6, #4 + mov r7, r2 +2: ldrd r4, [r7] + adds r4, r4, r0 + adc r5, r5, r1 + strd r4, [r7], #1 << L1_ORDER + subs r6, r6, #1 + bne 2b + + mrrc p15, 0, r4, r5, c2 @ read TTBR0 + adds r4, r4, r0 @ update physical address + adc r5, r5, r1 + mcrr p15, 0, r4, r5, c2 @ write back TTBR0 + mrrc p15, 1, r4, r5, c2 @ read TTBR1 + adds r4, r4, r0 @ update physical address + adc r5, r5, r1 + mcrr p15, 1, r4, r5, c2 @ write back TTBR1 + + dsb + + mov ip, #0 + mcr p15, 0, ip, c7, c5, 0 @ I+BTB cache invalidate + mcr p15, 0, ip, c8, c7, 0 @ local_flush_tlb_all() + dsb + isb + + mcr p15, 0, r8, c1, c0, 0 @ re-enable MMU + dsb + isb + + ldmfd sp!, {r4-r8, pc} +ENDPROC(lpae_pgtables_remap_asm) diff --git a/arch/arm/net/bpf_jit_32.c b/arch/arm/net/bpf_jit_32.c index e0e23582c..c011e2296 100644 --- a/arch/arm/net/bpf_jit_32.c +++ b/arch/arm/net/bpf_jit_32.c @@ -74,32 +74,52 @@ struct jit_ctx { int bpf_jit_enable __read_mostly; -static u64 jit_get_skb_b(struct sk_buff *skb, unsigned offset) +static inline int call_neg_helper(struct sk_buff *skb, int offset, void *ret, + unsigned int size) +{ + void *ptr = bpf_internal_load_pointer_neg_helper(skb, offset, size); + + if (!ptr) + return -EFAULT; + memcpy(ret, ptr, size); + return 0; +} + +static u64 jit_get_skb_b(struct sk_buff *skb, int offset) { u8 ret; int err; - err = skb_copy_bits(skb, offset, &ret, 1); + if (offset < 0) + err = call_neg_helper(skb, offset, &ret, 1); + else + err = skb_copy_bits(skb, offset, &ret, 1); return (u64)err << 32 | ret; } -static u64 jit_get_skb_h(struct sk_buff *skb, unsigned offset) +static u64 jit_get_skb_h(struct sk_buff *skb, int offset) { u16 ret; int err; - err = skb_copy_bits(skb, offset, &ret, 2); + if (offset < 0) + err = call_neg_helper(skb, offset, &ret, 2); + else + err = skb_copy_bits(skb, offset, &ret, 2); return (u64)err << 32 | ntohs(ret); } -static u64 jit_get_skb_w(struct sk_buff *skb, unsigned offset) +static u64 jit_get_skb_w(struct sk_buff *skb, int offset) { u32 ret; int err; - err = skb_copy_bits(skb, offset, &ret, 4); + if (offset < 0) + err = call_neg_helper(skb, offset, &ret, 4); + else + err = skb_copy_bits(skb, offset, &ret, 4); return (u64)err << 32 | ntohl(ret); } @@ -536,9 +556,6 @@ static int build_body(struct jit_ctx *ctx) case BPF_LD | BPF_B | BPF_ABS: load_order = 0; load: - /* the interpreter will deal with the negative K */ - if ((int)k < 0) - return -ENOTSUPP; emit_mov_i(r_off, k, ctx); load_common: ctx->seen |= SEEN_DATA | SEEN_CALL; @@ -547,12 +564,24 @@ load_common: emit(ARM_SUB_I(r_scratch, r_skb_hl, 1 << load_order), ctx); emit(ARM_CMP_R(r_scratch, r_off), ctx); - condt = ARM_COND_HS; + condt = ARM_COND_GE; } else { emit(ARM_CMP_R(r_skb_hl, r_off), ctx); condt = ARM_COND_HI; } + /* + * test for negative offset, only if we are + * currently scheduled to take the fast + * path. this will update the flags so that + * the slowpath instruction are ignored if the + * offset is negative. + * + * for loard_order == 0 the HI condition will + * make loads at offset 0 take the slow path too. + */ + _emit(condt, ARM_CMP_I(r_off, 0), ctx); + _emit(condt, ARM_ADD_R(r_scratch, r_off, r_skb_data), ctx); @@ -860,9 +889,11 @@ b_epilogue: off = offsetof(struct sk_buff, vlan_tci); emit(ARM_LDRH_I(r_A, r_skb, off), ctx); if (code == (BPF_ANC | SKF_AD_VLAN_TAG)) - OP_IMM3(ARM_AND, r_A, r_A, VLAN_VID_MASK, ctx); - else - OP_IMM3(ARM_AND, r_A, r_A, VLAN_TAG_PRESENT, ctx); + OP_IMM3(ARM_AND, r_A, r_A, ~VLAN_TAG_PRESENT, ctx); + else { + OP_IMM3(ARM_LSR, r_A, r_A, 12, ctx); + OP_IMM3(ARM_AND, r_A, r_A, 0x1, ctx); + } break; case BPF_ANC | SKF_AD_QUEUE: ctx->seen |= SEEN_SKB; @@ -873,6 +904,16 @@ b_epilogue: off = offsetof(struct sk_buff, queue_mapping); emit(ARM_LDRH_I(r_A, r_skb, off), ctx); break; + case BPF_LDX | BPF_W | BPF_ABS: + /* + * load a 32bit word from struct seccomp_data. + * seccomp_check_filter() will already have checked + * that k is 32bit aligned and lies within the + * struct seccomp_data. + */ + ctx->seen |= SEEN_SKB; + emit(ARM_LDR_I(r_A, r_skb, k), ctx); + break; default: return -1; } diff --git a/arch/arm/plat-omap/dma.c b/arch/arm/plat-omap/dma.c index 6416e03b4..1e460b4ee 100644 --- a/arch/arm/plat-omap/dma.c +++ b/arch/arm/plat-omap/dma.c @@ -38,6 +38,10 @@ #include <linux/omap-dma.h> +#ifdef CONFIG_ARCH_OMAP1 +#include <mach/soc.h> +#endif + /* * MAX_LOGICAL_DMA_CH_COUNT: the maximum number of logical DMA * channels that an instance of the SDMA IP block can support. Used diff --git a/arch/arm/plat-orion/common.c b/arch/arm/plat-orion/common.c index f5b00f41c..2235081a0 100644 --- a/arch/arm/plat-orion/common.c +++ b/arch/arm/plat-orion/common.c @@ -28,11 +28,7 @@ void __init orion_clkdev_add(const char *con_id, const char *dev_id, struct clk *clk) { - struct clk_lookup *cl; - - cl = clkdev_alloc(clk, con_id, dev_id); - if (cl) - clkdev_add(cl); + clkdev_create(clk, con_id, "%s", dev_id); } /* Create clkdev entries for all orion platforms except kirkwood. diff --git a/arch/arm/plat-samsung/adc.c b/arch/arm/plat-samsung/adc.c index e2be70df0..efa6e8561 100644 --- a/arch/arm/plat-samsung/adc.c +++ b/arch/arm/plat-samsung/adc.c @@ -389,7 +389,7 @@ static int s3c_adc_probe(struct platform_device *pdev) if (ret) return ret; - clk_enable(adc->clk); + clk_prepare_enable(adc->clk); tmp = adc->prescale | S3C2410_ADCCON_PRSCEN; @@ -413,7 +413,7 @@ static int s3c_adc_remove(struct platform_device *pdev) { struct adc_device *adc = platform_get_drvdata(pdev); - clk_disable(adc->clk); + clk_disable_unprepare(adc->clk); regulator_disable(adc->vdd); return 0; @@ -475,7 +475,7 @@ static int s3c_adc_resume(struct device *dev) #define s3c_adc_resume NULL #endif -static struct platform_device_id s3c_adc_driver_ids[] = { +static const struct platform_device_id s3c_adc_driver_ids[] = { { .name = "s3c24xx-adc", .driver_data = TYPE_ADCV1, diff --git a/arch/arm/vdso/Makefile b/arch/arm/vdso/Makefile index 8aa791051..1160434ee 100644 --- a/arch/arm/vdso/Makefile +++ b/arch/arm/vdso/Makefile @@ -6,9 +6,15 @@ obj-vdso := vgettimeofday.o datapage.o targets := $(obj-vdso) vdso.so vdso.so.dbg vdso.so.raw vdso.lds obj-vdso := $(addprefix $(obj)/, $(obj-vdso)) -ccflags-y := -shared -fPIC -fno-common -fno-builtin -fno-stack-protector -ccflags-y += -nostdlib -Wl,-soname=linux-vdso.so.1 -DDISABLE_BRANCH_PROFILING -ccflags-y += -Wl,--no-undefined $(call cc-ldoption, -Wl$(comma)--hash-style=sysv) +ccflags-y := -fPIC -fno-common -fno-builtin -fno-stack-protector +ccflags-y += -DDISABLE_BRANCH_PROFILING + +VDSO_LDFLAGS := -Wl,-Bsymbolic -Wl,--no-undefined -Wl,-soname=linux-vdso.so.1 +VDSO_LDFLAGS += -Wl,-z,max-page-size=4096 -Wl,-z,common-page-size=4096 +VDSO_LDFLAGS += -nostdlib -shared +VDSO_LDFLAGS += $(call cc-ldoption, -Wl$(comma)--hash-style=sysv) +VDSO_LDFLAGS += $(call cc-ldoption, -Wl$(comma)--build-id) +VDSO_LDFLAGS += $(call cc-ldoption, -fuse-ld=bfd) obj-$(CONFIG_VDSO) += vdso.o extra-$(CONFIG_VDSO) += vdso.lds @@ -40,10 +46,8 @@ $(obj)/%.so: $(obj)/%.so.dbg FORCE # Actual build commands quiet_cmd_vdsold = VDSO $@ - cmd_vdsold = $(CC) $(c_flags) -Wl,-T $(filter %.lds,$^) $(filter %.o,$^) \ - $(call cc-ldoption, -Wl$(comma)--build-id) \ - -Wl,-Bsymbolic -Wl,-z,max-page-size=4096 \ - -Wl,-z,common-page-size=4096 -o $@ + cmd_vdsold = $(CC) $(c_flags) $(VDSO_LDFLAGS) \ + -Wl,-T $(filter %.lds,$^) $(filter %.o,$^) -o $@ quiet_cmd_vdsomunge = MUNGE $@ cmd_vdsomunge = $(objtree)/$(obj)/vdsomunge $< $@ diff --git a/arch/arm/vfp/vfpmodule.c b/arch/arm/vfp/vfpmodule.c index f6e4d56ed..2a61e4b04 100644 --- a/arch/arm/vfp/vfpmodule.c +++ b/arch/arm/vfp/vfpmodule.c @@ -445,6 +445,19 @@ static void vfp_enable(void *unused) set_copro_access(access | CPACC_FULL(10) | CPACC_FULL(11)); } +/* Called by platforms on which we want to disable VFP because it may not be + * present on all CPUs within a SMP complex. Needs to be called prior to + * vfp_init(). + */ +void vfp_disable(void) +{ + if (VFP_arch) { + pr_debug("%s: should be called prior to vfp_init\n", __func__); + return; + } + VFP_arch = 1; +} + #ifdef CONFIG_CPU_PM static int vfp_pm_suspend(void) { diff --git a/arch/arm/xen/enlighten.c b/arch/arm/xen/enlighten.c index 7d0f07020..6c09cc440 100644 --- a/arch/arm/xen/enlighten.c +++ b/arch/arm/xen/enlighten.c @@ -24,6 +24,7 @@ #include <linux/cpuidle.h> #include <linux/cpufreq.h> #include <linux/cpu.h> +#include <linux/console.h> #include <linux/mm.h> @@ -51,7 +52,9 @@ EXPORT_SYMBOL_GPL(xen_have_vector_callback); int xen_platform_pci_unplug = XEN_UNPLUG_ALL; EXPORT_SYMBOL_GPL(xen_platform_pci_unplug); -static __read_mostly int xen_events_irq = -1; +static __read_mostly unsigned int xen_events_irq; + +static __initdata struct device_node *xen_node; int xen_remap_domain_mfn_array(struct vm_area_struct *vma, unsigned long addr, @@ -150,40 +153,28 @@ static irqreturn_t xen_arm_callback(int irq, void *arg) * documentation of the Xen Device Tree format. */ #define GRANT_TABLE_PHYSADDR 0 -static int __init xen_guest_init(void) +void __init xen_early_init(void) { - struct xen_add_to_physmap xatp; - static struct shared_info *shared_info_page = 0; - struct device_node *node; int len; const char *s = NULL; const char *version = NULL; const char *xen_prefix = "xen,xen-"; - struct resource res; - phys_addr_t grant_frames; - node = of_find_compatible_node(NULL, NULL, "xen,xen"); - if (!node) { + xen_node = of_find_compatible_node(NULL, NULL, "xen,xen"); + if (!xen_node) { pr_debug("No Xen support\n"); - return 0; + return; } - s = of_get_property(node, "compatible", &len); + s = of_get_property(xen_node, "compatible", &len); if (strlen(xen_prefix) + 3 < len && !strncmp(xen_prefix, s, strlen(xen_prefix))) version = s + strlen(xen_prefix); if (version == NULL) { pr_debug("Xen version not found\n"); - return 0; + return; } - if (of_address_to_resource(node, GRANT_TABLE_PHYSADDR, &res)) - return 0; - grant_frames = res.start; - xen_events_irq = irq_of_parse_and_map(node, 0); - pr_info("Xen %s support found, events_irq=%d gnttab_frame=%pa\n", - version, xen_events_irq, &grant_frames); - if (xen_events_irq < 0) - return -ENODEV; + pr_info("Xen %s support found\n", version); xen_domain_type = XEN_HVM_DOMAIN; @@ -194,9 +185,34 @@ static int __init xen_guest_init(void) else xen_start_info->flags &= ~(SIF_INITDOMAIN|SIF_PRIVILEGED); - if (!shared_info_page) - shared_info_page = (struct shared_info *) - get_zeroed_page(GFP_KERNEL); + if (!console_set_on_cmdline && !xen_initial_domain()) + add_preferred_console("hvc", 0, NULL); +} + +static int __init xen_guest_init(void) +{ + struct xen_add_to_physmap xatp; + struct shared_info *shared_info_page = NULL; + struct resource res; + phys_addr_t grant_frames; + + if (!xen_domain()) + return 0; + + if (of_address_to_resource(xen_node, GRANT_TABLE_PHYSADDR, &res)) { + pr_err("Xen grant table base address not found\n"); + return -ENODEV; + } + grant_frames = res.start; + + xen_events_irq = irq_of_parse_and_map(xen_node, 0); + if (!xen_events_irq) { + pr_err("Xen event channel interrupt not found\n"); + return -ENODEV; + } + + shared_info_page = (struct shared_info *)get_zeroed_page(GFP_KERNEL); + if (!shared_info_page) { pr_err("not enough memory\n"); return -ENOMEM; diff --git a/arch/arm/xen/mm.c b/arch/arm/xen/mm.c index 498325074..03e75fef1 100644 --- a/arch/arm/xen/mm.c +++ b/arch/arm/xen/mm.c @@ -15,10 +15,10 @@ #include <xen/xen.h> #include <xen/interface/grant_table.h> #include <xen/interface/memory.h> +#include <xen/page.h> #include <xen/swiotlb-xen.h> #include <asm/cacheflush.h> -#include <asm/xen/page.h> #include <asm/xen/hypercall.h> #include <asm/xen/interface.h> diff --git a/arch/arm/xen/p2m.c b/arch/arm/xen/p2m.c index cb7a14c5c..887596c67 100644 --- a/arch/arm/xen/p2m.c +++ b/arch/arm/xen/p2m.c @@ -10,10 +10,10 @@ #include <xen/xen.h> #include <xen/interface/memory.h> +#include <xen/page.h> #include <xen/swiotlb-xen.h> #include <asm/cacheflush.h> -#include <asm/xen/page.h> #include <asm/xen/hypercall.h> #include <asm/xen/interface.h> |