diff options
Diffstat (limited to 'arch/arm')
749 files changed, 24966 insertions, 9213 deletions
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 90542db12..a9c4e48bb 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -35,6 +35,7 @@ config ARM select HARDIRQS_SW_RESEND select HAVE_ARCH_AUDITSYSCALL if (AEABI && !OABI_COMPAT) select HAVE_ARCH_BITREVERSE if (CPU_32v7M || CPU_32v7) && !CPU_32v6 + select HAVE_ARCH_HARDENED_USERCOPY select HAVE_ARCH_JUMP_LABEL if !XIP_KERNEL && !CPU_ENDIAN_BE32 && MMU select HAVE_ARCH_KGDB if !CPU_ENDIAN_BE32 && MMU select HAVE_ARCH_MMAP_RND_BITS if MMU @@ -54,6 +55,7 @@ config ARM select HAVE_FTRACE_MCOUNT_RECORD if (!XIP_KERNEL) select HAVE_FUNCTION_GRAPH_TRACER if (!THUMB2_KERNEL) select HAVE_FUNCTION_TRACER if (!XIP_KERNEL) + select HAVE_GCC_PLUGINS select HAVE_GENERIC_DMA_COHERENT select HAVE_HW_BREAKPOINT if (PERF_EVENTS && (CPU_V6 || CPU_V6K || CPU_V7)) select HAVE_IDE if PCI || ISA || PCMCIA @@ -327,7 +329,6 @@ choice config ARCH_MULTIPLATFORM bool "Allow multiple platforms to be selected" depends on MMU - select ARCH_WANT_OPTIONAL_GPIOLIB select ARM_HAS_SG_CHAIN select ARM_PATCH_PHYS_VIRT select AUTO_ZRELADDR @@ -342,7 +343,6 @@ config ARCH_MULTIPLATFORM config ARM_SINGLE_ARMV7M bool "ARMv7-M based platforms (Cortex-M0/M3/M4)" depends on !MMU - select ARCH_WANT_OPTIONAL_GPIOLIB select ARM_NVIC select AUTO_ZRELADDR select CLKSRC_OF @@ -353,26 +353,12 @@ config ARM_SINGLE_ARMV7M select SPARSE_IRQ select USE_OF - -config ARCH_CLPS711X - bool "Cirrus Logic CLPS711x/EP721x/EP731x-based" - select ARCH_REQUIRE_GPIOLIB - select AUTO_ZRELADDR - select CLKSRC_MMIO - select COMMON_CLK - select CPU_ARM720T - select GENERIC_CLOCKEVENTS - select MFD_SYSCON - select SOC_BUS - help - Support for Cirrus Logic 711x/721x/731x based boards. - config ARCH_GEMINI bool "Cortina Systems Gemini" - select ARCH_REQUIRE_GPIOLIB select CLKSRC_MMIO select CPU_FA526 select GENERIC_CLOCKEVENTS + select GPIOLIB help Support for the Cortina Systems Gemini family SoCs @@ -393,7 +379,6 @@ config ARCH_EBSA110 config ARCH_EP93XX bool "EP93xx-based" select ARCH_HAS_HOLES_MEMORYMODEL - select ARCH_REQUIRE_GPIOLIB select ARM_AMBA select ARM_PATCH_PHYS_VIRT select ARM_VIC @@ -402,6 +387,7 @@ config ARCH_EP93XX select CLKSRC_MMIO select CPU_ARM920T select GENERIC_CLOCKEVENTS + select GPIOLIB help This enables support for the Cirrus EP93xx series of CPUs. @@ -442,9 +428,9 @@ config ARCH_IOP13XX config ARCH_IOP32X bool "IOP32x-based" depends on MMU - select ARCH_REQUIRE_GPIOLIB select CPU_XSCALE select GPIO_IOP + select GPIOLIB select NEED_RET_TO_USER select PCI select PLAT_IOP @@ -455,9 +441,9 @@ config ARCH_IOP32X config ARCH_IOP33X bool "IOP33x-based" depends on MMU - select ARCH_REQUIRE_GPIOLIB select CPU_XSCALE select GPIO_IOP + select GPIOLIB select NEED_RET_TO_USER select PCI select PLAT_IOP @@ -468,12 +454,12 @@ config ARCH_IXP4XX bool "IXP4xx-based" depends on MMU select ARCH_HAS_DMA_SET_COHERENT_MASK - select ARCH_REQUIRE_GPIOLIB select ARCH_SUPPORTS_BIG_ENDIAN select CLKSRC_MMIO select CPU_XSCALE select DMABOUNCE if PCI select GENERIC_CLOCKEVENTS + select GPIOLIB select MIGHT_HAVE_PCI select NEED_MACH_IO_H select USB_EHCI_BIG_ENDIAN_DESC @@ -483,9 +469,9 @@ config ARCH_IXP4XX config ARCH_DOVE bool "Marvell Dove" - select ARCH_REQUIRE_GPIOLIB select CPU_PJ4 select GENERIC_CLOCKEVENTS + select GPIOLIB select MIGHT_HAVE_PCI select MULTI_IRQ_HANDLER select MVEBU_MBUS @@ -499,10 +485,10 @@ config ARCH_DOVE config ARCH_KS8695 bool "Micrel/Kendin KS8695" - select ARCH_REQUIRE_GPIOLIB select CLKSRC_MMIO select CPU_ARM922T select GENERIC_CLOCKEVENTS + select GPIOLIB select NEED_MACH_MEMORY_H help Support for Micrel/Kendin KS8695 "Centaur" (ARM922T) based @@ -510,11 +496,11 @@ config ARCH_KS8695 config ARCH_W90X900 bool "Nuvoton W90X900 CPU" - select ARCH_REQUIRE_GPIOLIB select CLKDEV_LOOKUP select CLKSRC_MMIO select CPU_ARM926T select GENERIC_CLOCKEVENTS + select GPIOLIB help Support for Nuvoton (Winbond logic dept.) ARM9 processor, At present, the w90x900 has been renamed nuc900, regarding @@ -526,13 +512,13 @@ config ARCH_W90X900 config ARCH_LPC32XX bool "NXP LPC32XX" - select ARCH_REQUIRE_GPIOLIB select ARM_AMBA select CLKDEV_LOOKUP select CLKSRC_LPC32XX select COMMON_CLK select CPU_ARM926T select GENERIC_CLOCKEVENTS + select GPIOLIB select MULTI_IRQ_HANDLER select SPARSE_IRQ select USE_OF @@ -543,7 +529,6 @@ config ARCH_PXA bool "PXA2xx/PXA3xx-based" depends on MMU select ARCH_MTD_XIP - select ARCH_REQUIRE_GPIOLIB select ARM_CPU_SUSPEND if PM select AUTO_ZRELADDR select COMMON_CLK @@ -554,6 +539,7 @@ config ARCH_PXA select CPU_XSCALE if !CPU_XSC3 select GENERIC_CLOCKEVENTS select GPIO_PXA + select GPIOLIB select HAVE_IDE select IRQ_DOMAIN select MULTI_IRQ_HANDLER @@ -584,7 +570,6 @@ config ARCH_RPC config ARCH_SA1100 bool "SA1100-based" select ARCH_MTD_XIP - select ARCH_REQUIRE_GPIOLIB select ARCH_SPARSEMEM_ENABLE select CLKDEV_LOOKUP select CLKSRC_MMIO @@ -593,6 +578,7 @@ config ARCH_SA1100 select CPU_FREQ select CPU_SA1100 select GENERIC_CLOCKEVENTS + select GPIOLIB select HAVE_IDE select IRQ_DOMAIN select ISA @@ -604,12 +590,12 @@ config ARCH_SA1100 config ARCH_S3C24XX bool "Samsung S3C24XX SoCs" - select ARCH_REQUIRE_GPIOLIB select ATAGS select CLKDEV_LOOKUP select CLKSRC_SAMSUNG_PWM select GENERIC_CLOCKEVENTS select GPIO_SAMSUNG + select GPIOLIB select HAVE_S3C2410_I2C if I2C select HAVE_S3C2410_WATCHDOG if WATCHDOG select HAVE_S3C_RTC if RTC_CLASS @@ -625,12 +611,12 @@ config ARCH_S3C24XX config ARCH_DAVINCI bool "TI DaVinci" select ARCH_HAS_HOLES_MEMORYMODEL - select ARCH_REQUIRE_GPIOLIB select CLKDEV_LOOKUP select CPU_ARM926T select GENERIC_ALLOCATOR select GENERIC_CLOCKEVENTS select GENERIC_IRQ_CHIP + select GPIOLIB select HAVE_IDE select USE_OF select ZONE_DMA @@ -642,11 +628,11 @@ config ARCH_OMAP1 depends on MMU select ARCH_HAS_HOLES_MEMORYMODEL select ARCH_OMAP - select ARCH_REQUIRE_GPIOLIB select CLKDEV_LOOKUP select CLKSRC_MMIO select GENERIC_CLOCKEVENTS select GENERIC_IRQ_CHIP + select GPIOLIB select HAVE_IDE select IRQ_DOMAIN select MULTI_IRQ_HANDLER @@ -715,7 +701,7 @@ config ARCH_VIRT depends on ARCH_MULTI_V7 select ARM_AMBA select ARM_GIC - select ARM_GIC_V2M if PCI_MSI + select ARM_GIC_V2M if PCI select ARM_GIC_V3 select ARM_PSCI select HAVE_ARM_ARCH_TIMER @@ -868,7 +854,7 @@ source "arch/arm/mach-zynq/Kconfig" config ARCH_EFM32 bool "Energy Micro efm32" depends on ARM_SINGLE_ARMV7M - select ARCH_REQUIRE_GPIOLIB + select GPIOLIB help Support for Energy Micro's (now Silicon Labs) efm32 Giant Gecko processors. @@ -901,7 +887,7 @@ config MACH_STM32F429 default y config ARCH_MPS2 - bool "ARM MPS2 paltform" + bool "ARM MPS2 platform" depends on ARM_SINGLE_ARMV7M select ARM_AMBA select CLKSRC_MPS2 @@ -1186,6 +1172,60 @@ config ARM_ERRATA_773022 loop buffer may deliver incorrect instructions. This workaround disables the loop buffer to avoid the erratum. +config ARM_ERRATA_818325_852422 + bool "ARM errata: A12: some seqs of opposed cond code instrs => deadlock or corruption" + depends on CPU_V7 + help + This option enables the workaround for: + - Cortex-A12 818325: Execution of an UNPREDICTABLE STR or STM + instruction might deadlock. Fixed in r0p1. + - Cortex-A12 852422: Execution of a sequence of instructions might + lead to either a data corruption or a CPU deadlock. Not fixed in + any Cortex-A12 cores yet. + This workaround for all both errata involves setting bit[12] of the + Feature Register. This bit disables an optimisation applied to a + sequence of 2 instructions that use opposing condition codes. + +config ARM_ERRATA_821420 + bool "ARM errata: A12: sequence of VMOV to core registers might lead to a dead lock" + depends on CPU_V7 + help + This option enables the workaround for the 821420 Cortex-A12 + (all revs) erratum. In very rare timing conditions, a sequence + of VMOV to Core registers instructions, for which the second + one is in the shadow of a branch or abort, can lead to a + deadlock when the VMOV instructions are issued out-of-order. + +config ARM_ERRATA_825619 + bool "ARM errata: A12: DMB NSHST/ISHST mixed ... might cause deadlock" + depends on CPU_V7 + help + This option enables the workaround for the 825619 Cortex-A12 + (all revs) erratum. Within rare timing constraints, executing a + DMB NSHST or DMB ISHST instruction followed by a mix of Cacheable + and Device/Strongly-Ordered loads and stores might cause deadlock + +config ARM_ERRATA_852421 + bool "ARM errata: A17: DMB ST might fail to create order between stores" + depends on CPU_V7 + help + This option enables the workaround for the 852421 Cortex-A17 + (r1p0, r1p1, r1p2) erratum. Under very rare timing conditions, + execution of a DMB ST instruction might fail to properly order + stores from GroupA and stores from GroupB. + +config ARM_ERRATA_852423 + bool "ARM errata: A17: some seqs of opposed cond code instrs => deadlock or corruption" + depends on CPU_V7 + help + This option enables the workaround for: + - Cortex-A17 852423: Execution of a sequence of instructions might + lead to either a data corruption or a CPU deadlock. Not fixed in + any Cortex-A17 cores yet. + This is identical to Cortex-A12 erratum 852422. It is a separate + config option from the A12 erratum due to the way errata are checked + for and handled. + endmenu source "arch/arm/common/Kconfig" diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug index 19a3dcf5e..a9693b698 100644 --- a/arch/arm/Kconfig.debug +++ b/arch/arm/Kconfig.debug @@ -109,23 +109,41 @@ choice 0x80020000 | 0xf0020000 | UART8 0x80024000 | 0xf0024000 | UART9 - config DEBUG_AT91_UART - bool "Kernel low-level debugging on Atmel SoCs" - depends on ARCH_AT91 + config DEBUG_AT91_RM9200_DBGU + bool "Kernel low-level debugging on AT91RM9200, AT91SAM9 DBGU" + select DEBUG_AT91_UART + depends on SOC_AT91RM9200 || SOC_AT91SAM9 help - Say Y here if you want the debug print routines to direct - their output to the serial port on atmel devices. + Say Y here if you want kernel low-level debugging support + on the DBGU port of: + at91rm9200, at91sam9260, at91sam9g20, at91sam9261, + at91sam9g10, at91sam9n12, at91sam9rl64, at91sam9x5 - SOC DEBUG_UART_PHYS DEBUG_UART_VIRT PORT - rm9200, 9260/9g20, 0xfffff200 0xfefff200 DBGU - 9261/9g10, 9rl - 9263, 9g45, sama5d3 0xffffee00 0xfeffee00 DBGU - sama5d4 0xfc00c000 0xfb00c000 USART3 - sama5d4 0xfc069000 0xfb069000 DBGU - sama5d2 0xf8020000 0xf7020000 UART1 + config DEBUG_AT91_SAM9263_DBGU + bool "Kernel low-level debugging on AT91SAM{9263,9G45,A5D3} DBGU" + select DEBUG_AT91_UART + depends on SOC_AT91SAM9 || SOC_SAMA5D3 + help + Say Y here if you want kernel low-level debugging support + on the DBGU port of: + at91sam9263, at91sam9g45, at91sam9m10, + sama5d3 - Please adjust DEBUG_UART_PHYS configuration options based on - your needs. + config DEBUG_AT91_SAMA5D2_UART1 + bool "Kernel low-level debugging on SAMA5D2 UART1" + select DEBUG_AT91_UART + depends on SOC_SAMA5D2 + help + Say Y here if you want kernel low-level debugging support + on the UART1 port of sama5d2. + + config DEBUG_AT91_SAMA5D4_USART3 + bool "Kernel low-level debugging on SAMA5D4 USART3" + select DEBUG_AT91_UART + depends on SOC_SAMA5D4 + help + Say Y here if you want kernel low-level debugging support + on the USART3 port of sama5d4. config DEBUG_BCM2835 bool "Kernel low-level debugging on BCM2835 PL011 UART" @@ -138,8 +156,8 @@ choice select DEBUG_UART_PL01X config DEBUG_BCM_5301X - bool "Kernel low-level debugging on BCM5301X UART1" - depends on ARCH_BCM_5301X + bool "Kernel low-level debugging on BCM5301X/NSP UART1" + depends on ARCH_BCM_5301X || ARCH_BCM_NSP select DEBUG_UART_8250 config DEBUG_BCM_KONA_UART @@ -1296,6 +1314,10 @@ choice endchoice +config DEBUG_AT91_UART + bool + depends on ARCH_AT91 + config DEBUG_EXYNOS_UART bool @@ -1502,8 +1524,10 @@ config DEBUG_UART_PHYS default 0xf1012000 if DEBUG_MVEBU_UART0_ALTERNATE default 0xf1012100 if DEBUG_MVEBU_UART1_ALTERNATE default 0xf7fc9000 if DEBUG_BERLIN_UART + default 0xf8020000 if DEBUG_AT91_SAMA5D2_UART1 default 0xf8b00000 if DEBUG_HIX5HD2_UART default 0xf991e000 if DEBUG_QCOM_UARTDM + default 0xfc00c000 if DEBUG_AT91_SAMA5D4_USART3 default 0xfcb00000 if DEBUG_HI3620_UART default 0xfd883000 if DEBUG_ALPINE_UART0 default 0xfe800000 if ARCH_IOP32X @@ -1518,6 +1542,8 @@ config DEBUG_UART_PHYS default 0xfffb0800 if DEBUG_OMAP1UART2 || DEBUG_OMAP7XXUART2 default 0xfffb9800 if DEBUG_OMAP1UART3 || DEBUG_OMAP7XXUART3 default 0xfffe8600 if DEBUG_BCM63XX_UART + default 0xffffee00 if DEBUG_AT91_SAM9263_DBGU + default 0xfffff200 if DEBUG_AT91_RM9200_DBGU default 0xfffff700 if ARCH_IOP33X depends on ARCH_EP93XX || \ DEBUG_LL_UART_8250 || DEBUG_LL_UART_PL01X || \ @@ -1566,13 +1592,17 @@ config DEBUG_UART_VIRT DEBUG_S3C2410_UART1) default 0xf7008000 if DEBUG_S3C24XX_UART && (DEBUG_S3C_UART2 || \ DEBUG_S3C2410_UART2) + default 0xf7020000 if DEBUG_AT91_SAMA5D2_UART1 default 0xf7fc9000 if DEBUG_BERLIN_UART default 0xf8007000 if DEBUG_HIP04_UART default 0xf8009000 if DEBUG_VEXPRESS_UART0_CA9 default 0xf8090000 if DEBUG_VEXPRESS_UART0_RS1 + default 0xf8ffee00 if DEBUG_AT91_SAM9263_DBGU + default 0xf8fff200 if DEBUG_AT91_RM9200_DBGU default 0xfa71e000 if DEBUG_QCOM_UARTDM default 0xfb002000 if DEBUG_CNS3XXX default 0xfb009000 if DEBUG_REALVIEW_STD_PORT + default 0xfb00c000 if DEBUG_AT91_SAMA5D4_USART3 default 0xfb10c000 if DEBUG_REALVIEW_PB1176_PORT default 0xfc40ab00 if DEBUG_BRCMSTB_UART default 0xfc705000 if DEBUG_ZTE_ZX @@ -1627,7 +1657,8 @@ config DEBUG_UART_VIRT DEBUG_QCOM_UARTDM || DEBUG_S3C24XX_UART || \ DEBUG_S3C64XX_UART || \ DEBUG_BCM63XX_UART || DEBUG_ASM9260_UART || \ - DEBUG_SIRFSOC_UART || DEBUG_DIGICOLOR_UA0 + DEBUG_SIRFSOC_UART || DEBUG_DIGICOLOR_UA0 || \ + DEBUG_AT91_UART config DEBUG_UART_8250_SHIFT int "Register offset shift for the 8250 debug UART" diff --git a/arch/arm/Makefile b/arch/arm/Makefile index 274e8a658..61f6ccc19 100644 --- a/arch/arm/Makefile +++ b/arch/arm/Makefile @@ -140,7 +140,6 @@ head-y := arch/arm/kernel/head$(MMUEXT).o # Text offset. This list is sorted numerically by address in order to # provide a means to avoid/resolve conflicts in multi-arch kernels. textofs-y := 0x00008000 -textofs-$(CONFIG_ARCH_CLPS711X) := 0x00028000 # We don't want the htc bootloader to corrupt kernel during resume textofs-$(CONFIG_PM_H1940) := 0x00108000 # SA1111 DMA bug: we don't want the kernel to live in precious DMA-able memory @@ -261,12 +260,14 @@ machdirs := $(patsubst %,arch/arm/mach-%/,$(machine-y)) platdirs := $(patsubst %,arch/arm/plat-%/,$(sort $(plat-y))) ifneq ($(CONFIG_ARCH_MULTIPLATFORM),y) +ifneq ($(CONFIG_ARM_SINGLE_ARMV7M),y) ifeq ($(KBUILD_SRC),) KBUILD_CPPFLAGS += $(patsubst %,-I%include,$(machdirs) $(platdirs)) else KBUILD_CPPFLAGS += $(patsubst %,-I$(srctree)/%include,$(machdirs) $(platdirs)) endif endif +endif export TEXT_OFFSET GZFLAGS MMUEXT @@ -327,6 +328,7 @@ zImage: Image $(BOOT_TARGETS): vmlinux $(Q)$(MAKE) $(build)=$(boot) MACHINE=$(MACHINE) $(boot)/$@ + @$(kecho) ' Kernel: $(boot)/$@ is ready' $(INSTALL_TARGETS): $(Q)$(MAKE) $(build)=$(boot) MACHINE=$(MACHINE) $@ diff --git a/arch/arm/boot/Makefile b/arch/arm/boot/Makefile index 5be33a2d5..bdc1d5af0 100644 --- a/arch/arm/boot/Makefile +++ b/arch/arm/boot/Makefile @@ -31,7 +31,7 @@ ifeq ($(CONFIG_XIP_KERNEL),y) $(obj)/xipImage: vmlinux FORCE $(call if_changed,objcopy) - @$(kecho) ' Kernel: $@ is ready (physical address: $(CONFIG_XIP_PHYS_ADDR))' + @$(kecho) ' Physical Address of xipImage: $(CONFIG_XIP_PHYS_ADDR)' $(obj)/Image $(obj)/zImage: FORCE @echo 'Kernel configured for XIP (CONFIG_XIP_KERNEL=y)' @@ -46,14 +46,12 @@ $(obj)/xipImage: FORCE $(obj)/Image: vmlinux FORCE $(call if_changed,objcopy) - @$(kecho) ' Kernel: $@ is ready' $(obj)/compressed/vmlinux: $(obj)/Image FORCE $(Q)$(MAKE) $(build)=$(obj)/compressed $@ $(obj)/zImage: $(obj)/compressed/vmlinux FORCE $(call if_changed,objcopy) - @$(kecho) ' Kernel: $@ is ready' endif @@ -78,14 +76,12 @@ fi $(obj)/uImage: $(obj)/zImage FORCE @$(check_for_multiple_loadaddr) $(call if_changed,uimage) - @$(kecho) ' Image $@ is ready' $(obj)/bootp/bootp: $(obj)/zImage initrd FORCE $(Q)$(MAKE) $(build)=$(obj)/bootp $@ $(obj)/bootpImage: $(obj)/bootp/bootp FORCE $(call if_changed,objcopy) - @$(kecho) ' Kernel: $@ is ready' PHONY += initrd install zinstall uinstall initrd: diff --git a/arch/arm/boot/compressed/head.S b/arch/arm/boot/compressed/head.S index af11c2f8f..fc6d54154 100644 --- a/arch/arm/boot/compressed/head.S +++ b/arch/arm/boot/compressed/head.S @@ -779,7 +779,7 @@ __armv7_mmu_cache_on: orrne r0, r0, #1 @ MMU enabled movne r1, #0xfffffffd @ domain 0 = client bic r6, r6, #1 << 31 @ 32-bit translation system - bic r6, r6, #3 << 0 @ use only ttbr0 + bic r6, r6, #(7 << 0) | (1 << 4) @ use only ttbr0 mcrne p15, 0, r3, c2, c0, 0 @ load page table pointer mcrne p15, 0, r1, c3, c0, 0 @ load domain access control mcrne p15, 0, r6, c2, c0, 2 @ load ttb control diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index 414b42710..faacd5237 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -7,9 +7,10 @@ dtb-$(CONFIG_MACH_ARTPEC6) += \ dtb-$(CONFIG_MACH_ASM9260) += \ alphascale-asm9260-devkit.dtb # Keep at91 dtb files sorted alphabetically for each SoC -dtb-$(CONFIG_SOC_SAM_V4_V5) += \ +dtb-$(CONFIG_SOC_AT91RM9200) += \ at91rm9200ek.dtb \ - mpa1600.dtb \ + mpa1600.dtb +dtb-$(CONFIG_SOC_AT91SAM9) += \ animeo_ip.dtb \ at91-qil_a9260.dtb \ aks-cdu.dtb \ @@ -17,8 +18,10 @@ dtb-$(CONFIG_SOC_SAM_V4_V5) += \ evk-pro3.dtb \ tny_a9260.dtb \ usb_a9260.dtb \ + at91sam9260ek.dtb \ at91sam9261ek.dtb \ at91sam9263ek.dtb \ + at91-sam9_l9260.dtb \ tny_a9263.dtb \ usb_a9263.dtb \ at91-foxg20.dtb \ @@ -85,6 +88,7 @@ dtb-$(CONFIG_ARCH_BCM_5301X) += \ bcm47094-dlink-dir-885l.dtb \ bcm94708.dtb \ bcm94709.dtb \ + bcm953012er.dtb \ bcm953012k.dtb dtb-$(CONFIG_ARCH_BCM_63XX) += \ bcm963138dvt.dtb @@ -95,8 +99,11 @@ dtb-$(CONFIG_ARCH_BCM_CYGNUS) += \ bcm958305k.dtb dtb-$(CONFIG_ARCH_BCM_MOBILE) += \ bcm28155-ap.dtb \ - bcm21664-garnet.dtb + bcm21664-garnet.dtb \ + bcm23550-sparrow.dtb dtb-$(CONFIG_ARCH_BCM_NSP) += \ + bcm958525xmc.dtb \ + bcm958625hr.dtb \ bcm958625k.dtb dtb-$(CONFIG_ARCH_BERLIN) += \ berlin2-sony-nsz-gs7.dtb \ @@ -104,6 +111,8 @@ dtb-$(CONFIG_ARCH_BERLIN) += \ berlin2q-marvell-dmp.dtb dtb-$(CONFIG_ARCH_BRCMSTB) += \ bcm7445-bcm97445svmb.dtb +dtb-$(CONFIG_ARCH_CLPS711X) += \ + ep7211-edb7211.dtb dtb-$(CONFIG_ARCH_DAVINCI) += \ da850-enbw-cmc.dtb \ da850-evm.dtb @@ -134,6 +143,7 @@ dtb-$(CONFIG_ARCH_EXYNOS5) += \ exynos5250-snow-rev5.dtb \ exynos5250-spring.dtb \ exynos5260-xyref5260.dtb \ + exynos5410-odroidxu.dtb \ exynos5410-smdk5410.dtb \ exynos5420-arndale-octa.dtb \ exynos5420-peach-pit.dtb \ @@ -146,8 +156,6 @@ dtb-$(CONFIG_ARCH_EXYNOS5) += \ exynos5800-peach-pi.dtb dtb-$(CONFIG_ARCH_HI3xxx) += \ hi3620-hi4511.dtb -dtb-$(CONFIG_ARCH_HIX5HD2) += \ - hisi-x5hd2-dkb.dtb dtb-$(CONFIG_ARCH_HIGHBANK) += \ highbank.dtb \ ecx-2000.dtb @@ -155,6 +163,10 @@ dtb-$(CONFIG_ARCH_HIP01) += \ hip01-ca9x2.dtb dtb-$(CONFIG_ARCH_HIP04) += \ hip04-d01.dtb +dtb-$(CONFIG_ARCH_HISI) += \ + hi3519-demb.dtb +dtb-$(CONFIG_ARCH_HIX5HD2) += \ + hisi-x5hd2-dkb.dtb dtb-$(CONFIG_ARCH_INTEGRATOR) += \ integratorap.dtb \ integratorcp.dtb @@ -356,6 +368,7 @@ dtb-$(CONFIG_SOC_IMX6Q) += \ imx6q-gw54xx.dtb \ imx6q-gw551x.dtb \ imx6q-gw552x.dtb \ + imx6q-h100.dtb \ imx6q-hummingboard.dtb \ imx6q-icore-rqs.dtb \ imx6q-marsboard.dtb \ @@ -377,6 +390,7 @@ dtb-$(CONFIG_SOC_IMX6Q) += \ imx6q-tx6q-1110.dtb \ imx6q-tx6q-11x0-mb7.dtb \ imx6q-udoo.dtb \ + imx6q-utilite-pro.dtb \ imx6q-wandboard.dtb \ imx6q-wandboard-revb1.dtb \ imx6qp-nitrogen6_max.dtb \ @@ -399,9 +413,11 @@ dtb-$(CONFIG_SOC_IMX6UL) += \ imx6ul-tx6ul-mainboard.dtb dtb-$(CONFIG_SOC_IMX7D) += \ imx7d-cl-som-imx7.dtb \ + imx7d-colibri-eval-v3.dtb \ imx7d-nitrogen7.dtb \ imx7d-sbc-imx7.dtb \ - imx7d-sdb.dtb + imx7d-sdb.dtb \ + imx7s-colibri-eval-v3.dtb dtb-$(CONFIG_SOC_LS1021A) += \ ls1021a-qds.dtb \ ls1021a-twr.dtb @@ -416,7 +432,9 @@ dtb-$(CONFIG_SOC_VF610) += \ dtb-$(CONFIG_ARCH_MXS) += \ imx23-evk.dtb \ imx23-olinuxino.dtb \ + imx23-sansa.dtb \ imx23-stmp378x_devb.dtb \ + imx23-xfi3.dtb \ imx28-apf28.dtb \ imx28-apf28dev.dtb \ imx28-apx4devkit.dtb \ @@ -572,7 +590,8 @@ dtb-$(CONFIG_ARCH_PRIMA2) += \ dtb-$(CONFIG_ARCH_OXNAS) += \ wd-mbwe.dtb dtb-$(CONFIG_ARCH_QCOM) += \ - qcom-apq8064-arrow-db600c.dtb \ + qcom-apq8060-dragonboard.dtb \ + qcom-apq8064-arrow-sd-600eval.dtb \ qcom-apq8064-cm-qs600.dtb \ qcom-apq8064-ifc6410.dtb \ qcom-apq8064-sony-xperia-yuga.dtb \ @@ -602,6 +621,7 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += \ rk3066a-rayeager.dtb \ rk3188-radxarock.dtb \ rk3228-evb.dtb \ + rk3229-evb.dtb \ rk3288-evb-act8846.dtb \ rk3288-evb-rk808.dtb \ rk3288-firefly-beta.dtb \ @@ -638,6 +658,7 @@ dtb-$(CONFIG_ARCH_SHMOBILE_MULTI) += \ r8a7790-lager.dtb \ r8a7791-koelsch.dtb \ r8a7791-porter.dtb \ + r8a7792-blanche.dtb \ r8a7793-gose.dtb \ r8a7794-alt.dtb \ r8a7794-silk.dtb \ @@ -728,6 +749,7 @@ dtb-$(CONFIG_MACH_SUN6I) += \ sun6i-a31s-yones-toptech-bs1078-v2.dtb dtb-$(CONFIG_MACH_SUN7I) += \ sun7i-a20-bananapi.dtb \ + sun7i-a20-bananapi-m1-plus.dtb \ sun7i-a20-bananapro.dtb \ sun7i-a20-cubieboard2.dtb \ sun7i-a20-cubietruck.dtb \ @@ -752,8 +774,10 @@ dtb-$(CONFIG_MACH_SUN7I) += \ dtb-$(CONFIG_MACH_SUN8I) += \ sun8i-a23-evb.dtb \ sun8i-a23-gt90h-v4.dtb \ + sun8i-a23-inet86dz.dtb \ sun8i-a23-ippo-q8h-v5.dtb \ sun8i-a23-ippo-q8h-v1.2.dtb \ + sun8i-a23-polaroid-mid2407pxe03.dtb \ sun8i-a23-polaroid-mid2809pxe04.dtb \ sun8i-a23-q8-tablet.dtb \ sun8i-a33-et-q8-v1.6.dtb \ @@ -763,10 +787,12 @@ dtb-$(CONFIG_MACH_SUN8I) += \ sun8i-a33-sinlinx-sina33.dtb \ sun8i-a83t-allwinner-h8homlet-v2.dtb \ sun8i-a83t-cubietruck-plus.dtb \ + sun8i-h3-bananapi-m2-plus.dtb \ sun8i-h3-orangepi-2.dtb \ sun8i-h3-orangepi-one.dtb \ sun8i-h3-orangepi-pc.dtb \ - sun8i-h3-orangepi-plus.dtb + sun8i-h3-orangepi-plus.dtb \ + sun8i-r16-parrot.dtb dtb-$(CONFIG_MACH_SUN9I) += \ sun9i-a80-optimus.dtb \ sun9i-a80-cubieboard4.dtb @@ -794,6 +820,7 @@ dtb-$(CONFIG_ARCH_TEGRA_114_SOC) += \ tegra114-roth.dtb \ tegra114-tn7.dtb dtb-$(CONFIG_ARCH_TEGRA_124_SOC) += \ + tegra124-apalis-eval.dtb \ tegra124-jetson-tk1.dtb \ tegra124-nyan-big.dtb \ tegra124-nyan-blaze.dtb \ diff --git a/arch/arm/boot/dts/aks-cdu.dts b/arch/arm/boot/dts/aks-cdu.dts index d9c50fbb4..5b1bf92d9 100644 --- a/arch/arm/boot/dts/aks-cdu.dts +++ b/arch/arm/boot/dts/aks-cdu.dts @@ -57,7 +57,7 @@ }; }; - usb0: ohci@00500000 { + usb0: ohci@500000 { num-ports = <2>; status = "okay"; }; diff --git a/arch/arm/boot/dts/am335x-baltos.dtsi b/arch/arm/boot/dts/am335x-baltos.dtsi index c8609d8d2..b68917263 100644 --- a/arch/arm/boot/dts/am335x-baltos.dtsi +++ b/arch/arm/boot/dts/am335x-baltos.dtsi @@ -226,7 +226,7 @@ #address-cells = <1>; #size-cells = <1>; - elm_id = <&elm>; + ti,elm-id = <&elm>; }; }; diff --git a/arch/arm/boot/dts/am335x-bone-common.dtsi b/arch/arm/boot/dts/am335x-bone-common.dtsi index 0cc150b87..e247c15e5 100644 --- a/arch/arm/boot/dts/am335x-bone-common.dtsi +++ b/arch/arm/boot/dts/am335x-bone-common.dtsi @@ -18,6 +18,10 @@ reg = <0x80000000 0x10000000>; /* 256 MB */ }; + chosen { + stdout-path = &uart0; + }; + leds { pinctrl-names = "default"; pinctrl-0 = <&user_leds_s0>; @@ -318,7 +322,7 @@ /* VDD_MPU voltage limits 0.95V - 1.26V with +/-4% tolerance */ regulator-name = "vdd_mpu"; regulator-min-microvolt = <925000>; - regulator-max-microvolt = <1325000>; + regulator-max-microvolt = <1351500>; regulator-boot-on; regulator-always-on; }; @@ -359,12 +363,8 @@ phy-mode = "mii"; }; -&cpsw_emac1 { - phy_id = <&davinci_mdio>, <1>; - phy-mode = "mii"; -}; - &mac { + slaves = <1>; pinctrl-names = "default", "sleep"; pinctrl-0 = <&cpsw_default>; pinctrl-1 = <&cpsw_sleep>; diff --git a/arch/arm/boot/dts/am335x-boneblack.dts b/arch/arm/boot/dts/am335x-boneblack.dts index 55c0e954b..ca721670b 100644 --- a/arch/arm/boot/dts/am335x-boneblack.dts +++ b/arch/arm/boot/dts/am335x-boneblack.dts @@ -33,6 +33,17 @@ status = "okay"; }; +&cpu0_opp_table { + /* + * All PG 2.0 silicon may not support 1GHz but some of the early + * BeagleBone Blacks have PG 2.0 silicon which is guaranteed + * to support 1GHz OPP so enable it for PG 2.0 on this board. + */ + oppnitro@1000000000 { + opp-supported-hw = <0x06 0x0100>; + }; +}; + &am33xx_pinmux { nxp_hdmi_bonelt_pins: nxp_hdmi_bonelt_pins { pinctrl-single,pins = < diff --git a/arch/arm/boot/dts/am335x-evm.dts b/arch/arm/boot/dts/am335x-evm.dts index 516673bb0..5d28712ad 100644 --- a/arch/arm/boot/dts/am335x-evm.dts +++ b/arch/arm/boot/dts/am335x-evm.dts @@ -640,7 +640,7 @@ /* VDD_MPU voltage limits 0.95V - 1.26V with +/-4% tolerance */ regulator-name = "vdd_mpu"; regulator-min-microvolt = <912500>; - regulator-max-microvolt = <1312500>; + regulator-max-microvolt = <1351500>; regulator-boot-on; regulator-always-on; }; diff --git a/arch/arm/boot/dts/am335x-evmsk.dts b/arch/arm/boot/dts/am335x-evmsk.dts index 282fe1b37..09308d666 100644 --- a/arch/arm/boot/dts/am335x-evmsk.dts +++ b/arch/arm/boot/dts/am335x-evmsk.dts @@ -560,7 +560,7 @@ /* VDD_MPU voltage limits 0.95V - 1.26V with +/-4% tolerance */ regulator-name = "vdd_mpu"; regulator-min-microvolt = <912500>; - regulator-max-microvolt = <1312500>; + regulator-max-microvolt = <1351500>; regulator-boot-on; regulator-always-on; }; diff --git a/arch/arm/boot/dts/am335x-icev2.dts b/arch/arm/boot/dts/am335x-icev2.dts index e271013e7..7d8b8fefd 100644 --- a/arch/arm/boot/dts/am335x-icev2.dts +++ b/arch/arm/boot/dts/am335x-icev2.dts @@ -206,6 +206,13 @@ gpio-controller; #gpio-cells = <2>; }; + + pca9536: gpio@41 { + compatible = "ti,pca9536"; + reg = <0x41>; + gpio-controller; + #gpio-cells = <2>; + }; }; #include "tps65910.dtsi" diff --git a/arch/arm/boot/dts/am335x-igep0033.dtsi b/arch/arm/boot/dts/am335x-igep0033.dtsi index df63484ef..e7d9ca130 100644 --- a/arch/arm/boot/dts/am335x-igep0033.dtsi +++ b/arch/arm/boot/dts/am335x-igep0033.dtsi @@ -161,7 +161,7 @@ #address-cells = <1>; #size-cells = <1>; - elm_id = <&elm>; + ti,elm-id = <&elm>; /* MTD partition table */ partition@0 { diff --git a/arch/arm/boot/dts/am335x-phycore-som.dtsi b/arch/arm/boot/dts/am335x-phycore-som.dtsi index 86f773165..1263c9d4c 100644 --- a/arch/arm/boot/dts/am335x-phycore-som.dtsi +++ b/arch/arm/boot/dts/am335x-phycore-som.dtsi @@ -197,7 +197,7 @@ gpmc,wr-access-ns = <30>; gpmc,wr-data-mux-bus-ns = <0>; - elm_id = <&elm>; + ti,elm-id = <&elm>; #address-cells = <1>; #size-cells = <1>; diff --git a/arch/arm/boot/dts/am33xx.dtsi b/arch/arm/boot/dts/am33xx.dtsi index 201bccbee..559977228 100644 --- a/arch/arm/boot/dts/am33xx.dtsi +++ b/arch/arm/boot/dts/am33xx.dtsi @@ -45,19 +45,9 @@ device_type = "cpu"; reg = <0>; - /* - * To consider voltage drop between PMIC and SoC, - * tolerance value is reduced to 2% from 4% and - * voltage value is increased as a precaution. - */ - operating-points = < - /* kHz uV */ - 720000 1285000 - 600000 1225000 - 500000 1125000 - 275000 1125000 - >; - voltage-tolerance = <2>; /* 2 percentage */ + operating-points-v2 = <&cpu0_opp_table>; + ti,syscon-efuse = <&scm_conf 0x7fc 0x1fff 0>; + ti,syscon-rev = <&scm_conf 0x600>; clocks = <&dpll_mpu_ck>; clock-names = "cpu"; @@ -66,6 +56,78 @@ }; }; + cpu0_opp_table: opp_table0 { + compatible = "operating-points-v2"; + + /* + * The three following nodes are marked with opp-suspend + * because the can not be enabled simultaneously on a + * single SoC. + */ + opp50@300000000 { + opp-hz = /bits/ 64 <300000000>; + opp-microvolt = <950000 931000 969000>; + opp-supported-hw = <0x06 0x0010>; + opp-suspend; + }; + + opp100@275000000 { + opp-hz = /bits/ 64 <275000000>; + opp-microvolt = <1100000 1078000 1122000>; + opp-supported-hw = <0x01 0x00FF>; + opp-suspend; + }; + + opp100@300000000 { + opp-hz = /bits/ 64 <300000000>; + opp-microvolt = <1100000 1078000 1122000>; + opp-supported-hw = <0x06 0x0020>; + opp-suspend; + }; + + opp100@500000000 { + opp-hz = /bits/ 64 <500000000>; + opp-microvolt = <1100000 1078000 1122000>; + opp-supported-hw = <0x01 0xFFFF>; + }; + + opp100@600000000 { + opp-hz = /bits/ 64 <600000000>; + opp-microvolt = <1100000 1078000 1122000>; + opp-supported-hw = <0x06 0x0040>; + }; + + opp120@600000000 { + opp-hz = /bits/ 64 <600000000>; + opp-microvolt = <1200000 1176000 1224000>; + opp-supported-hw = <0x01 0xFFFF>; + }; + + opp120@720000000 { + opp-hz = /bits/ 64 <720000000>; + opp-microvolt = <1200000 1176000 1224000>; + opp-supported-hw = <0x06 0x0080>; + }; + + oppturbo@720000000 { + opp-hz = /bits/ 64 <720000000>; + opp-microvolt = <1260000 1234800 1285200>; + opp-supported-hw = <0x01 0xFFFF>; + }; + + oppturbo@800000000 { + opp-hz = /bits/ 64 <800000000>; + opp-microvolt = <1260000 1234800 1285200>; + opp-supported-hw = <0x06 0x0100>; + }; + + oppnitro@1000000000 { + opp-hz = /bits/ 64 <1000000000>; + opp-microvolt = <1325000 1298500 1351500>; + opp-supported-hw = <0x04 0x0200>; + }; + }; + pmu { compatible = "arm,cortex-a8-pmu"; interrupts = <3>; @@ -187,7 +249,7 @@ reg = <0x49000000 0x10000>; reg-names = "edma3_cc"; interrupts = <12 13 14>; - interrupt-names = "edma3_ccint", "emda3_mperr", + interrupt-names = "edma3_ccint", "edma3_mperr", "edma3_ccerrint"; dma-requests = <64>; #dma-cells = <2>; @@ -679,20 +741,24 @@ 0x48300200 0x48300200 0x80>; /* EHRPWM */ ecap0: ecap@48300100 { - compatible = "ti,am33xx-ecap"; + compatible = "ti,am3352-ecap", + "ti,am33xx-ecap"; #pwm-cells = <3>; reg = <0x48300100 0x80>; + clocks = <&l4ls_gclk>; + clock-names = "fck"; interrupts = <31>; interrupt-names = "ecap0"; - ti,hwmods = "ecap0"; status = "disabled"; }; ehrpwm0: pwm@48300200 { - compatible = "ti,am33xx-ehrpwm"; + compatible = "ti,am3352-ehrpwm", + "ti,am33xx-ehrpwm"; #pwm-cells = <3>; reg = <0x48300200 0x80>; - ti,hwmods = "ehrpwm0"; + clocks = <&ehrpwm0_tbclk>, <&l4ls_gclk>; + clock-names = "tbclk", "fck"; status = "disabled"; }; }; @@ -709,20 +775,24 @@ 0x48302200 0x48302200 0x80>; /* EHRPWM */ ecap1: ecap@48302100 { - compatible = "ti,am33xx-ecap"; + compatible = "ti,am3352-ecap", + "ti,am33xx-ecap"; #pwm-cells = <3>; reg = <0x48302100 0x80>; + clocks = <&l4ls_gclk>; + clock-names = "fck"; interrupts = <47>; interrupt-names = "ecap1"; - ti,hwmods = "ecap1"; status = "disabled"; }; ehrpwm1: pwm@48302200 { - compatible = "ti,am33xx-ehrpwm"; + compatible = "ti,am3352-ehrpwm", + "ti,am33xx-ehrpwm"; #pwm-cells = <3>; reg = <0x48302200 0x80>; - ti,hwmods = "ehrpwm1"; + clocks = <&ehrpwm1_tbclk>, <&l4ls_gclk>; + clock-names = "tbclk", "fck"; status = "disabled"; }; }; @@ -739,20 +809,24 @@ 0x48304200 0x48304200 0x80>; /* EHRPWM */ ecap2: ecap@48304100 { - compatible = "ti,am33xx-ecap"; + compatible = "ti,am3352-ecap", + "ti,am33xx-ecap"; #pwm-cells = <3>; reg = <0x48304100 0x80>; + clocks = <&l4ls_gclk>; + clock-names = "fck"; interrupts = <61>; interrupt-names = "ecap2"; - ti,hwmods = "ecap2"; status = "disabled"; }; ehrpwm2: pwm@48304200 { - compatible = "ti,am33xx-ehrpwm"; + compatible = "ti,am3352-ehrpwm", + "ti,am33xx-ehrpwm"; #pwm-cells = <3>; reg = <0x48304200 0x80>; - ti,hwmods = "ehrpwm2"; + clocks = <&ehrpwm2_tbclk>, <&l4ls_gclk>; + clock-names = "tbclk", "fck"; status = "disabled"; }; }; @@ -766,7 +840,6 @@ ale_entries = <1024>; bd_ram_size = <0x2000>; no_bd_ram = <0>; - rx_descs = <64>; mac_control = <0x20>; slaves = <2>; active_slave = <0>; @@ -789,7 +862,7 @@ status = "disabled"; davinci_mdio: mdio@4a101000 { - compatible = "ti,davinci_mdio"; + compatible = "ti,cpsw-mdio","ti,davinci_mdio"; #address-cells = <1>; #size-cells = <0>; ti,hwmods = "davinci_mdio"; diff --git a/arch/arm/boot/dts/am3517-craneboard.dts b/arch/arm/boot/dts/am3517-craneboard.dts index cb7de1d4e..f9d8f3948 100644 --- a/arch/arm/boot/dts/am3517-craneboard.dts +++ b/arch/arm/boot/dts/am3517-craneboard.dts @@ -20,7 +20,7 @@ reg = <0x80000000 0x10000000>; /* 256 MB */ }; - vbat: fixedregulator@0 { + vbat: fixedregulator { compatible = "regulator-fixed"; regulator-name = "vbat"; regulator-min-microvolt = <5000000>; diff --git a/arch/arm/boot/dts/am4372.dtsi b/arch/arm/boot/dts/am4372.dtsi index e0962f4b4..a51969d17 100644 --- a/arch/arm/boot/dts/am4372.dtsi +++ b/arch/arm/boot/dts/am4372.dtsi @@ -44,10 +44,49 @@ clocks = <&dpll_mpu_ck>; clock-names = "cpu"; + operating-points-v2 = <&cpu0_opp_table>; + ti,syscon-efuse = <&scm_conf 0x610 0x3f 0>; + ti,syscon-rev = <&scm_conf 0x600>; + clock-latency = <300000>; /* From omap-cpufreq driver */ }; }; + cpu0_opp_table: opp_table0 { + compatible = "operating-points-v2"; + + opp50@300000000 { + opp-hz = /bits/ 64 <300000000>; + opp-microvolt = <950000 931000 969000>; + opp-supported-hw = <0xFF 0x01>; + opp-suspend; + }; + + opp100@600000000 { + opp-hz = /bits/ 64 <600000000>; + opp-microvolt = <1100000 1078000 1122000>; + opp-supported-hw = <0xFF 0x04>; + }; + + opp120@720000000 { + opp-hz = /bits/ 64 <720000000>; + opp-microvolt = <1200000 1176000 1224000>; + opp-supported-hw = <0xFF 0x08>; + }; + + oppturbo@800000000 { + opp-hz = /bits/ 64 <800000000>; + opp-microvolt = <1260000 1234800 1285200>; + opp-supported-hw = <0xFF 0x10>; + }; + + oppnitro@1000000000 { + opp-hz = /bits/ 64 <1000000000>; + opp-microvolt = <1325000 1298500 1351500>; + opp-supported-hw = <0xFF 0x20>; + }; + }; + gic: interrupt-controller@48241000 { compatible = "arm,cortex-a9-gic"; interrupt-controller; @@ -199,7 +238,7 @@ interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "edma3_ccint", "emda3_mperr", + interrupt-names = "edma3_ccint", "edma3_mperr", "edma3_ccerrint"; dma-requests = <64>; #dma-cells = <2>; @@ -626,7 +665,6 @@ ale_entries = <1024>; bd_ram_size = <0x2000>; no_bd_ram = <0>; - rx_descs = <64>; mac_control = <0x20>; slaves = <2>; active_slave = <0>; @@ -636,7 +674,7 @@ syscon = <&scm_conf>; davinci_mdio: mdio@4a101000 { - compatible = "ti,am4372-mdio","ti,davinci_mdio"; + compatible = "ti,am4372-mdio","ti,cpsw-mdio","ti,davinci_mdio"; reg = <0x4a101000 0x100>; #address-cells = <1>; #size-cells = <0>; @@ -672,18 +710,24 @@ status = "disabled"; ecap0: ecap@48300100 { - compatible = "ti,am4372-ecap","ti,am33xx-ecap"; + compatible = "ti,am4372-ecap", + "ti,am3352-ecap", + "ti,am33xx-ecap"; #pwm-cells = <3>; reg = <0x48300100 0x80>; - ti,hwmods = "ecap0"; + clocks = <&l4ls_gclk>; + clock-names = "fck"; status = "disabled"; }; ehrpwm0: pwm@48300200 { - compatible = "ti,am4372-ehrpwm","ti,am33xx-ehrpwm"; + compatible = "ti,am4372-ehrpwm", + "ti,am3352-ehrpwm", + "ti,am33xx-ehrpwm"; #pwm-cells = <3>; reg = <0x48300200 0x80>; - ti,hwmods = "ehrpwm0"; + clocks = <&ehrpwm0_tbclk>, <&l4ls_gclk>; + clock-names = "tbclk", "fck"; status = "disabled"; }; }; @@ -698,18 +742,24 @@ status = "disabled"; ecap1: ecap@48302100 { - compatible = "ti,am4372-ecap","ti,am33xx-ecap"; + compatible = "ti,am4372-ecap", + "ti,am3352-ecap", + "ti,am33xx-ecap"; #pwm-cells = <3>; reg = <0x48302100 0x80>; - ti,hwmods = "ecap1"; + clocks = <&l4ls_gclk>; + clock-names = "fck"; status = "disabled"; }; ehrpwm1: pwm@48302200 { - compatible = "ti,am4372-ehrpwm","ti,am33xx-ehrpwm"; + compatible = "ti,am4372-ehrpwm", + "ti,am3352-ehrpwm", + "ti,am33xx-ehrpwm"; #pwm-cells = <3>; reg = <0x48302200 0x80>; - ti,hwmods = "ehrpwm1"; + clocks = <&ehrpwm1_tbclk>, <&l4ls_gclk>; + clock-names = "tbclk", "fck"; status = "disabled"; }; }; @@ -724,18 +774,24 @@ status = "disabled"; ecap2: ecap@48304100 { - compatible = "ti,am4372-ecap","ti,am33xx-ecap"; + compatible = "ti,am4372-ecap", + "ti,am3352-ecap", + "ti,am33xx-ecap"; #pwm-cells = <3>; reg = <0x48304100 0x80>; - ti,hwmods = "ecap2"; + clocks = <&l4ls_gclk>; + clock-names = "fck"; status = "disabled"; }; ehrpwm2: pwm@48304200 { - compatible = "ti,am4372-ehrpwm","ti,am33xx-ehrpwm"; + compatible = "ti,am4372-ehrpwm", + "ti,am3352-ehrpwm", + "ti,am33xx-ehrpwm"; #pwm-cells = <3>; reg = <0x48304200 0x80>; - ti,hwmods = "ehrpwm2"; + clocks = <&ehrpwm2_tbclk>, <&l4ls_gclk>; + clock-names = "tbclk", "fck"; status = "disabled"; }; }; @@ -750,10 +806,13 @@ status = "disabled"; ehrpwm3: pwm@48306200 { - compatible = "ti,am4372-ehrpwm","ti,am33xx-ehrpwm"; + compatible = "ti,am4372-ehrpwm", + "ti,am3352-ehrpwm", + "ti,am33xx-ehrpwm"; #pwm-cells = <3>; reg = <0x48306200 0x80>; - ti,hwmods = "ehrpwm3"; + clocks = <&ehrpwm3_tbclk>, <&l4ls_gclk>; + clock-names = "tbclk", "fck"; status = "disabled"; }; }; @@ -768,10 +827,13 @@ status = "disabled"; ehrpwm4: pwm@48308200 { - compatible = "ti,am4372-ehrpwm","ti,am33xx-ehrpwm"; + compatible = "ti,am4372-ehrpwm", + "ti,am3352-ehrpwm", + "ti,am33xx-ehrpwm"; #pwm-cells = <3>; reg = <0x48308200 0x80>; - ti,hwmods = "ehrpwm4"; + clocks = <&ehrpwm4_tbclk>, <&l4ls_gclk>; + clock-names = "tbclk", "fck"; status = "disabled"; }; }; @@ -786,10 +848,13 @@ status = "disabled"; ehrpwm5: pwm@4830a200 { - compatible = "ti,am4372-ehrpwm","ti,am33xx-ehrpwm"; + compatible = "ti,am4372-ehrpwm", + "ti,am3352-ehrpwm", + "ti,am33xx-ehrpwm"; #pwm-cells = <3>; reg = <0x4830a200 0x80>; - ti,hwmods = "ehrpwm5"; + clocks = <&ehrpwm5_tbclk>, <&l4ls_gclk>; + clock-names = "tbclk", "fck"; status = "disabled"; }; }; @@ -843,6 +908,13 @@ dma-names = "tx", "rx"; }; + rng: rng@48310000 { + compatible = "ti,omap4-rng"; + ti,hwmods = "rng"; + reg = <0x48310000 0x2000>; + interrupts = <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>; + }; + mcasp0: mcasp@48038000 { compatible = "ti,am33xx-mcasp-audio"; ti,hwmods = "mcasp0"; diff --git a/arch/arm/boot/dts/am437x-gp-evm.dts b/arch/arm/boot/dts/am437x-gp-evm.dts index 5bcd3aa02..14677d599 100644 --- a/arch/arm/boot/dts/am437x-gp-evm.dts +++ b/arch/arm/boot/dts/am437x-gp-evm.dts @@ -897,7 +897,7 @@ pinctrl-0 = <&dss_pins>; port { - dpi_out: endpoint@0 { + dpi_out: endpoint { remote-endpoint = <&lcd_in>; data-lines = <24>; }; @@ -975,3 +975,7 @@ clock-names = "ext-clk", "int-clk"; status = "okay"; }; + +&cpu { + cpu0-supply = <&dcdc2>; +}; diff --git a/arch/arm/boot/dts/am437x-idk-evm.dts b/arch/arm/boot/dts/am437x-idk-evm.dts index 76dcfc6d5..12a695183 100644 --- a/arch/arm/boot/dts/am437x-idk-evm.dts +++ b/arch/arm/boot/dts/am437x-idk-evm.dts @@ -382,6 +382,7 @@ }; &mac { + slaves = <1>; pinctrl-names = "default", "sleep"; pinctrl-0 = <&cpsw_default>; pinctrl-1 = <&cpsw_sleep>; diff --git a/arch/arm/boot/dts/am437x-sbc-t43.dts b/arch/arm/boot/dts/am437x-sbc-t43.dts index 5f750c0ed..d23260d3a 100644 --- a/arch/arm/boot/dts/am437x-sbc-t43.dts +++ b/arch/arm/boot/dts/am437x-sbc-t43.dts @@ -145,7 +145,7 @@ pinctrl-0 = <&dss_pinctrl_default>; port { - dpi_lcd_out: endpoint@0 { + dpi_lcd_out: endpoint { remote-endpoint = <&lcd_in>; data-lines = <24>; }; diff --git a/arch/arm/boot/dts/am43x-epos-evm.dts b/arch/arm/boot/dts/am43x-epos-evm.dts index 3549b8c9a..ad32e5553 100644 --- a/arch/arm/boot/dts/am43x-epos-evm.dts +++ b/arch/arm/boot/dts/am43x-epos-evm.dts @@ -754,7 +754,7 @@ pinctrl-0 = <&dss_pins>; port { - dpi_out: endpoint@0 { + dpi_out: endpoint { remote-endpoint = <&lcd_in>; data-lines = <24>; }; diff --git a/arch/arm/boot/dts/am43xx-clocks.dtsi b/arch/arm/boot/dts/am43xx-clocks.dtsi index 7630ba1d8..d1d73b725 100644 --- a/arch/arm/boot/dts/am43xx-clocks.dtsi +++ b/arch/arm/boot/dts/am43xx-clocks.dtsi @@ -104,6 +104,14 @@ clock-div = <1>; }; + rng_fck: rng_fck { + #clock-cells = <0>; + compatible = "fixed-factor-clock"; + clocks = <&sys_clkin_ck>; + clock-mult = <1>; + clock-div = <1>; + }; + ehrpwm0_tbclk: ehrpwm0_tbclk@664 { #clock-cells = <0>; compatible = "ti,gate-clock"; diff --git a/arch/arm/boot/dts/am57xx-beagle-x15.dts b/arch/arm/boot/dts/am57xx-beagle-x15.dts index 81d6c3033..c4d04c529 100644 --- a/arch/arm/boot/dts/am57xx-beagle-x15.dts +++ b/arch/arm/boot/dts/am57xx-beagle-x15.dts @@ -86,7 +86,7 @@ led@3 { label = "beagle-x15:usr3"; gpios = <&gpio7 15 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "ide-disk"; + linux,default-trigger = "disk-activity"; default-state = "off"; }; }; diff --git a/arch/arm/boot/dts/am57xx-sbc-am57x.dts b/arch/arm/boot/dts/am57xx-sbc-am57x.dts index 988e99632..31f9be632 100644 --- a/arch/arm/boot/dts/am57xx-sbc-am57x.dts +++ b/arch/arm/boot/dts/am57xx-sbc-am57x.dts @@ -128,7 +128,7 @@ vdda_video-supply = <&ldoln_reg>; port { - dpi_lcd_out: endpoint@0 { + dpi_lcd_out: endpoint { remote-endpoint = <&lcd_in>; data-lines = <24>; }; diff --git a/arch/arm/boot/dts/animeo_ip.dts b/arch/arm/boot/dts/animeo_ip.dts index 0962f2fa3..9cc372b9f 100644 --- a/arch/arm/boot/dts/animeo_ip.dts +++ b/arch/arm/boot/dts/animeo_ip.dts @@ -32,15 +32,6 @@ }; clocks { - #address-cells = <1>; - #size-cells = <1>; - ranges; - - main_clock: clock@0 { - compatible = "atmel,osc", "fixed-clock"; - clock-frequency = <18432000>; - }; - slow_xtal { clock-frequency = <32768>; }; @@ -114,7 +105,7 @@ }; }; - usb0: ohci@00500000 { + usb0: ohci@500000 { num-ports = <2>; atmel,vbus-gpio = <&pioB 15 GPIO_ACTIVE_LOW>; status = "okay"; diff --git a/arch/arm/boot/dts/armada-388-clearfog.dts b/arch/arm/boot/dts/armada-388-clearfog.dts index 7b7c15ada..d3e6bd805 100644 --- a/arch/arm/boot/dts/armada-388-clearfog.dts +++ b/arch/arm/boot/dts/armada-388-clearfog.dts @@ -239,22 +239,6 @@ status = "okay"; }; - mdio@72004 { - pinctrl-0 = <&mdio_pins>; - pinctrl-names = "default"; - - phy_dedicated: ethernet-phy@0 { - /* - * Annoyingly, the marvell phy driver - * configures the LED register, rather - * than preserving reset-loaded setting. - * We undo that rubbish here. - */ - marvell,reg-init = <3 16 0 0x101e>; - reg = <0>; - }; - }; - pinctrl@18000 { clearfog_dsa0_clk_pins: clearfog-dsa0-clk-pins { marvell,pins = "mpp46"; diff --git a/arch/arm/boot/dts/armada-390.dtsi b/arch/arm/boot/dts/armada-390.dtsi index 094e39c66..6cd18d8aa 100644 --- a/arch/arm/boot/dts/armada-390.dtsi +++ b/arch/arm/boot/dts/armada-390.dtsi @@ -47,6 +47,8 @@ #include "armada-39x.dtsi" / { + compatible = "marvell,armada390"; + soc { internal-regs { pinctrl@18000 { @@ -54,4 +56,5 @@ reg = <0x18000 0x20>; }; }; + }; }; diff --git a/arch/arm/boot/dts/at91-ariag25.dts b/arch/arm/boot/dts/at91-ariag25.dts index e9ced3015..4da011a7a 100644 --- a/arch/arm/boot/dts/at91-ariag25.dts +++ b/arch/arm/boot/dts/at91-ariag25.dts @@ -34,15 +34,6 @@ }; clocks { - #address-cells = <1>; - #size-cells = <1>; - ranges; - - main_clock: clock@0 { - compatible = "atmel,osc", "fixed-clock"; - clock-frequency = <12000000>; - }; - slow_xtal { clock-frequency = <32768>; }; @@ -178,7 +169,7 @@ }; - onewire@0 { + onewire { compatible = "w1-gpio"; gpios = <&pioA 21 GPIO_ACTIVE_LOW>; pinctrl-names = "default"; diff --git a/arch/arm/boot/dts/at91-cosino.dtsi b/arch/arm/boot/dts/at91-cosino.dtsi index b6ea3f4a7..02d8ef43d 100644 --- a/arch/arm/boot/dts/at91-cosino.dtsi +++ b/arch/arm/boot/dts/at91-cosino.dtsi @@ -26,15 +26,6 @@ }; clocks { - #address-cells = <1>; - #size-cells = <1>; - ranges; - - main_clock: clock@0 { - compatible = "atmel,osc", "fixed-clock"; - clock-frequency = <12000000>; - }; - slow_xtal { clock-frequency = <32768>; }; diff --git a/arch/arm/boot/dts/at91-foxg20.dts b/arch/arm/boot/dts/at91-foxg20.dts index 6bf873e7d..50d5e719b 100644 --- a/arch/arm/boot/dts/at91-foxg20.dts +++ b/arch/arm/boot/dts/at91-foxg20.dts @@ -23,15 +23,6 @@ }; clocks { - #address-cells = <1>; - #size-cells = <1>; - ranges; - - main_clock: clock@0 { - compatible = "atmel,osc", "fixed-clock"; - clock-frequency = <18432000>; - }; - slow_xtal { clock-frequency = <32768>; }; @@ -128,13 +119,13 @@ }; }; - usb0: ohci@00500000 { + usb0: ohci@500000 { num-ports = <2>; status = "okay"; }; }; - i2c@0 { + i2c-gpio-0 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_i2c0>; i2c-gpio,delay-us = <5>; /* ~85 kHz */ diff --git a/arch/arm/boot/dts/at91-kizbox.dts b/arch/arm/boot/dts/at91-kizbox.dts index 229e989eb..b4f147c19 100644 --- a/arch/arm/boot/dts/at91-kizbox.dts +++ b/arch/arm/boot/dts/at91-kizbox.dts @@ -54,7 +54,7 @@ }; }; - usb0: ohci@00500000 { + usb0: ohci@500000 { num-ports = <1>; status = "okay"; }; @@ -96,7 +96,7 @@ }; }; - i2c@0 { + i2c-gpio-0 { status = "okay"; rtc: pcf8563@51 { diff --git a/arch/arm/boot/dts/at91-qil_a9260.dts b/arch/arm/boot/dts/at91-qil_a9260.dts index 4f2eebf4a..8f019184f 100644 --- a/arch/arm/boot/dts/at91-qil_a9260.dts +++ b/arch/arm/boot/dts/at91-qil_a9260.dts @@ -20,15 +20,6 @@ }; clocks { - #address-cells = <1>; - #size-cells = <1>; - ranges; - - main_clock: clock@0 { - compatible = "atmel,osc", "fixed-clock"; - clock-frequency = <12000000>; - }; - slow_xtal { clock-frequency = <32768>; }; @@ -111,7 +102,7 @@ }; }; - usb0: ohci@00500000 { + usb0: ohci@500000 { num-ports = <2>; status = "okay"; }; @@ -187,7 +178,7 @@ }; }; - i2c@0 { + i2c-gpio-0 { status = "okay"; }; }; diff --git a/arch/arm/boot/dts/at91-sam9_l9260.dts b/arch/arm/boot/dts/at91-sam9_l9260.dts new file mode 100644 index 000000000..171243ca4 --- /dev/null +++ b/arch/arm/boot/dts/at91-sam9_l9260.dts @@ -0,0 +1,121 @@ +/* + * at91-sam9_l9260.dts - Device Tree file for Olimex SAM9-L9260 board + * + * Copyright (C) 2016 Raashid Muhammed <raashidmuhammed@zilogic.com> + * + * Licensed under GPLv2 or later. + */ +/dts-v1/; +#include "at91sam9260.dtsi" + +/ { + model = "Olimex sam9-l9260"; + compatible = "olimex,sam9-l9260", "atmel,at91sam9260", "atmel,at91sam9"; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + memory { + reg = <0x20000000 0x4000000>; + }; + + clocks { + slow_xtal { + clock-frequency = <32768>; + }; + + main_xtal { + clock-frequency = <18432000>; + }; + }; + + ahb { + apb { + mmc0: mmc@fffa8000 { + pinctrl-0 = < + &pinctrl_board_mmc0 + &pinctrl_mmc0_clk + &pinctrl_mmc0_slot1_cmd_dat0 + &pinctrl_mmc0_slot1_dat1_3>; + status = "okay"; + + slot@1 { + reg = <1>; + bus-width = <4>; + cd-gpios = <&pioC 8 GPIO_ACTIVE_HIGH>; + wp-gpios = <&pioC 4 GPIO_ACTIVE_HIGH>; + }; + }; + + macb0: ethernet@fffc4000 { + pinctrl-0 = <&pinctrl_macb_rmii &pinctrl_macb_rmii_mii_alt>; + phy-mode = "mii"; + #address-cells = <1>; + #size-cells = <0>; + status = "okay"; + + ethernet-phy@1 { + reg = <0x1>; + }; + }; + + spi0: spi@fffc8000 { + cs-gpios = <&pioC 11 0>, <0>, <0>, <0>; + status = "okay"; + + flash@0 { + compatible = "atmel,at45", "atmel,dataflash"; + spi-max-frequency = <15000000>; + reg = <0>; + }; + }; + + dbgu: serial@fffff200 { + status = "okay"; + }; + + pinctrl@fffff400 { + mmc0 { + pinctrl_board_mmc0: mmc0-board { + atmel,pins = + <AT91_PIOC 8 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH /* CD pin */ + AT91_PIOC 4 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP>; /* WP pin */ + }; + }; + }; + }; + + nand0: nand@40000000 { + nand-bus-width = <8>; + nand-ecc-mode = "soft"; + nand-on-flash-bbt = <1>; + status = "okay"; + }; + + usb0: ohci@500000 { + status = "okay"; + }; + + }; + + i2c-gpio-0 { + status = "okay"; + }; + + leds { + compatible = "gpio-leds"; + + pwr_led { + label = "sam9-l9260:yellow:pwr"; + gpios = <&pioA 9 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "cpu0"; + }; + + status_led { + label = "sam9-l9260:green:status"; + gpios = <&pioA 6 GPIO_ACTIVE_LOW>; + linux,default-trigger = "timer"; + }; + }; +}; diff --git a/arch/arm/boot/dts/at91-sama5d2_xplained.dts b/arch/arm/boot/dts/at91-sama5d2_xplained.dts index eb4f1ac96..0b9a59d5f 100644 --- a/arch/arm/boot/dts/at91-sama5d2_xplained.dts +++ b/arch/arm/boot/dts/at91-sama5d2_xplained.dts @@ -158,56 +158,64 @@ i2c-sda-hold-time-ns = <350>; status = "okay"; - pmic: act8865@5b { - compatible = "active-semi,act8865"; + pmic@5b { + compatible = "active-semi,act8945a"; reg = <0x5b>; active-semi,vsel-high; + active-semi,chglev-gpios = <&pioA 12 GPIO_ACTIVE_HIGH>; + active-semi,lbo-gpios = <&pioA 72 GPIO_ACTIVE_LOW>; + active-semi,irq_gpios = <&pioA 45 GPIO_ACTIVE_LOW>; + active-semi,input-voltage-threshold-microvolt = <6600>; + active-semi,precondition-timeout = <40>; + active-semi,total-timeout = <3>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_charger_chglev &pinctrl_charger_lbo &pinctrl_charger_irq>; status = "okay"; regulators { - vdd_1v35_reg: DCDC_REG1 { + vdd_1v35_reg: REG_DCDC1 { regulator-name = "VDD_1V35"; regulator-min-microvolt = <1350000>; regulator-max-microvolt = <1350000>; regulator-always-on; }; - vdd_1v2_reg: DCDC_REG2 { + vdd_1v2_reg: REG_DCDC2 { regulator-name = "VDD_1V2"; regulator-min-microvolt = <1100000>; regulator-max-microvolt = <1300000>; regulator-always-on; }; - vdd_3v3_reg: DCDC_REG3 { + vdd_3v3_reg: REG_DCDC3 { regulator-name = "VDD_3V3"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; regulator-always-on; }; - vdd_fuse_reg: LDO_REG1 { + vdd_fuse_reg: REG_LDO1 { regulator-name = "VDD_FUSE"; regulator-min-microvolt = <2500000>; regulator-max-microvolt = <2500000>; regulator-always-on; }; - vdd_3v3_lp_reg: LDO_REG2 { + vdd_3v3_lp_reg: REG_LDO2 { regulator-name = "VDD_3V3_LP"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; regulator-always-on; }; - vdd_led_reg: LDO_REG3 { + vdd_led_reg: REG_LDO3 { regulator-name = "VDD_LED"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; regulator-always-on; }; - vdd_sdhc_1v8_reg: LDO_REG4 { + vdd_sdhc_1v8_reg: REG_LDO4 { regulator-name = "VDD_SDHC_1V8"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; @@ -309,6 +317,21 @@ bias-disable; }; + pinctrl_charger_chglev: charger_chglev { + pinmux = <PIN_PA12__GPIO>; + bias-disable; + }; + + pinctrl_charger_irq: charger_irq { + pinmux = <PIN_PB13__GPIO>; + bias-disable; + }; + + pinctrl_charger_lbo: charger_lbo { + pinmux = <PIN_PC8__GPIO>; + bias-pull-up; + }; + pinctrl_flx0_default: flx0_default { pinmux = <PIN_PB28__FLEXCOM0_IO0>, <PIN_PB29__FLEXCOM0_IO1>; diff --git a/arch/arm/boot/dts/at91-sama5d3_xplained.dts b/arch/arm/boot/dts/at91-sama5d3_xplained.dts index f3e2b96c0..c51fc652f 100644 --- a/arch/arm/boot/dts/at91-sama5d3_xplained.dts +++ b/arch/arm/boot/dts/at91-sama5d3_xplained.dts @@ -297,7 +297,7 @@ }; }; - vcc_mmc0_reg: fixedregulator@0 { + vcc_mmc0_reg: fixedregulator_mmc0 { compatible = "regulator-fixed"; gpio = <&pioE 2 GPIO_ACTIVE_LOW>; regulator-name = "mmc0-card-supply"; diff --git a/arch/arm/boot/dts/at91-sama5d4_ma5d4.dtsi b/arch/arm/boot/dts/at91-sama5d4_ma5d4.dtsi index e7b2109fc..a92c6e0ca 100644 --- a/arch/arm/boot/dts/at91-sama5d4_ma5d4.dtsi +++ b/arch/arm/boot/dts/at91-sama5d4_ma5d4.dtsi @@ -20,8 +20,11 @@ }; clocks { - main_clock: main_clock { - compatible = "atmel,osc", "fixed-clock"; + slow_xtal { + clock-frequency = <32768>; + }; + + main_xtal { clock-frequency = <12000000>; }; @@ -106,7 +109,7 @@ }; }; - vcc_3v3_reg: fixedregulator@0 { + vcc_3v3_reg: fixedregulator_3v3 { compatible = "regulator-fixed"; regulator-name = "VCC 3V3"; regulator-min-microvolt = <3300000>; @@ -115,7 +118,7 @@ regulator-always-on; }; - vcc_mmc0_reg: fixedregulator@1 { + vcc_mmc0_reg: fixedregulator_mmc0 { compatible = "regulator-fixed"; gpio = <&pioE 15 GPIO_ACTIVE_HIGH>; regulator-name = "RST_n MCI0"; diff --git a/arch/arm/boot/dts/at91-sama5d4_ma5d4evk.dts b/arch/arm/boot/dts/at91-sama5d4_ma5d4evk.dts index abaaba58f..eac4ea274 100644 --- a/arch/arm/boot/dts/at91-sama5d4_ma5d4evk.dts +++ b/arch/arm/boot/dts/at91-sama5d4_ma5d4evk.dts @@ -159,7 +159,7 @@ }; }; - vcc_mmc1_reg: fixedregulator@2 { + vcc_mmc1_reg: fixedregulator_mmc1 { compatible = "regulator-fixed"; gpio = <&pioE 17 GPIO_ACTIVE_LOW>; regulator-name = "VDD MCI1"; diff --git a/arch/arm/boot/dts/at91-sama5d4_xplained.dts b/arch/arm/boot/dts/at91-sama5d4_xplained.dts index da84e65b5..ed7fce297 100644 --- a/arch/arm/boot/dts/at91-sama5d4_xplained.dts +++ b/arch/arm/boot/dts/at91-sama5d4_xplained.dts @@ -252,7 +252,7 @@ }; }; - vcc_3v3_reg: fixedregulator@0 { + vcc_3v3_reg: fixedregulator_3v3 { compatible = "regulator-fixed"; regulator-name = "VCC 3V3"; regulator-min-microvolt = <3300000>; @@ -261,7 +261,7 @@ regulator-always-on; }; - vcc_mmc1_reg: fixedregulator@1 { + vcc_mmc1_reg: fixedregulator_mmc1 { compatible = "regulator-fixed"; gpio = <&pioE 4 GPIO_ACTIVE_LOW>; regulator-name = "VDD MCI1"; diff --git a/arch/arm/boot/dts/at91-sama5d4ek.dts b/arch/arm/boot/dts/at91-sama5d4ek.dts index 4e98cda97..f8b96cef5 100644 --- a/arch/arm/boot/dts/at91-sama5d4ek.dts +++ b/arch/arm/boot/dts/at91-sama5d4ek.dts @@ -69,26 +69,6 @@ ahb { apb { - lcd_bus@f0000000 { - status = "okay"; - - lcd@f0000000 { - status = "okay"; - }; - - lcdovl1@f0000140 { - status = "okay"; - }; - - lcdovl2@f0000240 { - status = "okay"; - }; - - lcdheo1@f0000340 { - status = "okay"; - }; - }; - adc0: adc@fc034000 { pinctrl-names = "default"; pinctrl-0 = < diff --git a/arch/arm/boot/dts/at91-vinco.dts b/arch/arm/boot/dts/at91-vinco.dts index 6a366ee95..e0c0b2897 100644 --- a/arch/arm/boot/dts/at91-vinco.dts +++ b/arch/arm/boot/dts/at91-vinco.dts @@ -245,7 +245,7 @@ }; - vcc_3v3_reg: fixedregulator@0 { + vcc_3v3_reg: fixedregulator_3v3 { compatible = "regulator-fixed"; regulator-name = "VCC 3V3"; regulator-min-microvolt = <3300000>; diff --git a/arch/arm/boot/dts/at91rm9200.dtsi b/arch/arm/boot/dts/at91rm9200.dtsi index f6cb7a80a..4e913c2cc 100644 --- a/arch/arm/boot/dts/at91rm9200.dtsi +++ b/arch/arm/boot/dts/at91rm9200.dtsi @@ -948,7 +948,7 @@ }; }; - i2c@0 { + i2c-gpio-0 { compatible = "i2c-gpio"; gpios = <&pioA 25 GPIO_ACTIVE_HIGH /* sda */ &pioA 26 GPIO_ACTIVE_HIGH /* scl */ diff --git a/arch/arm/boot/dts/at91sam9260.dtsi b/arch/arm/boot/dts/at91sam9260.dtsi index d4884dd1c..a3e363d79 100644 --- a/arch/arm/boot/dts/at91sam9260.dtsi +++ b/arch/arm/boot/dts/at91sam9260.dtsi @@ -938,25 +938,21 @@ atmel,adc-res-names = "lowres", "highres"; atmel,adc-use-res = "highres"; - trigger@0 { - reg = <0>; + trigger0 { trigger-name = "timer-counter-0"; trigger-value = <0x1>; }; - trigger@1 { - reg = <1>; + trigger1 { trigger-name = "timer-counter-1"; trigger-value = <0x3>; }; - trigger@2 { - reg = <2>; + trigger2 { trigger-name = "timer-counter-2"; trigger-value = <0x5>; }; - trigger@3 { - reg = <3>; + trigger3 { trigger-name = "external"; trigger-value = <0xd>; trigger-external; @@ -1007,7 +1003,7 @@ status = "disabled"; }; - usb0: ohci@00500000 { + usb0: ohci@500000 { compatible = "atmel,at91rm9200-ohci", "usb-ohci"; reg = <0x00500000 0x100000>; interrupts = <20 IRQ_TYPE_LEVEL_HIGH 2>; @@ -1017,7 +1013,7 @@ }; }; - i2c@0 { + i2c-gpio-0 { compatible = "i2c-gpio"; gpios = <&pioA 23 GPIO_ACTIVE_HIGH /* sda */ &pioA 24 GPIO_ACTIVE_HIGH /* scl */ diff --git a/arch/arm/boot/dts/at91sam9260ek.dts b/arch/arm/boot/dts/at91sam9260ek.dts new file mode 100644 index 000000000..2c87f5844 --- /dev/null +++ b/arch/arm/boot/dts/at91sam9260ek.dts @@ -0,0 +1,211 @@ +/* + * Device Tree file for Atmel at91sam9260 Evaluation Kit + * + * Copyright (C) 2016 Atmel, + * 2016 Nicolas Ferre <nicolas.ferre@atmel.com> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ +/dts-v1/; +#include "at91sam9260.dtsi" + +/ { + model = "Atmel at91sam9260ek"; + compatible = "atmel,at91sam9260ek", "atmel,at91sam9260", "atmel,at91sam9"; + + chosen { + stdout-path = &dbgu; + }; + + memory { + reg = <0x20000000 0x4000000>; + }; + + clocks { + slow_xtal { + clock-frequency = <32768>; + }; + + main_xtal { + clock-frequency = <18432000>; + }; + }; + + ahb { + apb { + usb1: gadget@fffa4000 { + atmel,vbus-gpio = <&pioC 5 GPIO_ACTIVE_HIGH>; + status = "okay"; + }; + + mmc0: mmc@fffa8000 { + pinctrl-0 = < + &pinctrl_board_mmc0_slot1 + &pinctrl_mmc0_clk + &pinctrl_mmc0_slot1_cmd_dat0 + &pinctrl_mmc0_slot1_dat1_3>; + status = "okay"; + slot@1 { + reg = <1>; + bus-width = <4>; + cd-gpios = <&pioC 9 GPIO_ACTIVE_HIGH>; + }; + }; + + usart0: serial@fffb0000 { + pinctrl-0 = + <&pinctrl_usart0 + &pinctrl_usart0_rts + &pinctrl_usart0_cts + &pinctrl_usart0_dtr_dsr + &pinctrl_usart0_dcd + &pinctrl_usart0_ri>; + status = "okay"; + }; + + usart1: serial@fffb4000 { + status = "okay"; + }; + + ssc0: ssc@fffbc000 { + status = "okay"; + pinctrl-0 = <&pinctrl_ssc0_tx>; + }; + + macb0: ethernet@fffc4000 { + phy-mode = "rmii"; + status = "okay"; + }; + + spi0: spi@fffc8000 { + cs-gpios = <0>, <&pioC 11 0>, <0>, <0>; + mtd_dataflash@0 { + compatible = "atmel,at45", "atmel,dataflash"; + spi-max-frequency = <50000000>; + reg = <1>; + }; + }; + + dbgu: serial@fffff200 { + status = "okay"; + }; + + pinctrl@fffff400 { + board { + pinctrl_board_mmc0_slot1: mmc0_slot1-board { + atmel,pins = + <AT91_PIOC 9 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>; + }; + }; + }; + + shdwc@fffffd10 { + atmel,wakeup-counter = <10>; + atmel,wakeup-rtt-timer; + }; + + rtc@fffffd20 { + atmel,rtt-rtc-time-reg = <&gpbr 0x0>; + status = "okay"; + }; + + watchdog@fffffd40 { + status = "okay"; + }; + + gpbr: syscon@fffffd50 { + status = "okay"; + }; + }; + + usb0: ohci@500000 { + num-ports = <2>; + status = "okay"; + }; + + nand0: nand@40000000 { + nand-bus-width = <8>; + nand-ecc-mode = "soft"; + nand-on-flash-bbt; + status = "okay"; + }; + }; + + gpio_keys { + compatible = "gpio-keys"; + + btn3 { + label = "Button 3"; + gpios = <&pioA 30 GPIO_ACTIVE_LOW>; + linux,code = <0x103>; + gpio-key,wakeup; + }; + + btn4 { + label = "Button 4"; + gpios = <&pioA 31 GPIO_ACTIVE_LOW>; + linux,code = <0x104>; + gpio-key,wakeup; + }; + }; + + i2c-gpio-0 { + status = "okay"; + + 24c512@50 { + compatible = "24c512"; + reg = <0x50>; + }; + }; + + leds { + compatible = "gpio-leds"; + + ds1 { + label = "ds1"; + gpios = <&pioA 9 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "heartbeat"; + }; + + ds5 { + label = "ds5"; + gpios = <&pioA 6 GPIO_ACTIVE_LOW>; + }; + }; +}; diff --git a/arch/arm/boot/dts/at91sam9261.dtsi b/arch/arm/boot/dts/at91sam9261.dtsi index 5e09de4eb..32752d788 100644 --- a/arch/arm/boot/dts/at91sam9261.dtsi +++ b/arch/arm/boot/dts/at91sam9261.dtsi @@ -860,7 +860,7 @@ }; }; - i2c@0 { + i2c-gpio-0 { compatible = "i2c-gpio"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_i2c_bitbang>; diff --git a/arch/arm/boot/dts/at91sam9263.dtsi b/arch/arm/boot/dts/at91sam9263.dtsi index 93446420a..aeb1a3637 100644 --- a/arch/arm/boot/dts/at91sam9263.dtsi +++ b/arch/arm/boot/dts/at91sam9263.dtsi @@ -1019,7 +1019,7 @@ }; }; - i2c@0 { + i2c-gpio-0 { compatible = "i2c-gpio"; gpios = <&pioB 4 GPIO_ACTIVE_HIGH /* sda */ &pioB 5 GPIO_ACTIVE_HIGH /* scl */ diff --git a/arch/arm/boot/dts/at91sam9263ek.dts b/arch/arm/boot/dts/at91sam9263ek.dts index 59df9d73d..127cc42e9 100644 --- a/arch/arm/boot/dts/at91sam9263ek.dts +++ b/arch/arm/boot/dts/at91sam9263ek.dts @@ -215,7 +215,7 @@ }; }; - i2c@0 { + i2c-gpio-0 { status = "okay"; 24c512@50 { diff --git a/arch/arm/boot/dts/at91sam9g20ek_common.dtsi b/arch/arm/boot/dts/at91sam9g20ek_common.dtsi index e9cc99b63..27847a47c 100644 --- a/arch/arm/boot/dts/at91sam9g20ek_common.dtsi +++ b/arch/arm/boot/dts/at91sam9g20ek_common.dtsi @@ -170,13 +170,13 @@ }; }; - usb0: ohci@00500000 { + usb0: ohci@500000 { num-ports = <2>; status = "okay"; }; }; - i2c@0 { + i2c-gpio-0 { status = "okay"; 24c512@50 { diff --git a/arch/arm/boot/dts/at91sam9g25ek.dts b/arch/arm/boot/dts/at91sam9g25ek.dts index 707fd4ea5..91a717744 100644 --- a/arch/arm/boot/dts/at91sam9g25ek.dts +++ b/arch/arm/boot/dts/at91sam9g25ek.dts @@ -26,7 +26,24 @@ i2c0: i2c@f8010000 { ov2640: camera@0x30 { + compatible = "ovti,ov2640"; + reg = <0x30>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pck0_as_isi_mck &pinctrl_sensor_power &pinctrl_sensor_reset>; + resetb-gpios = <&pioA 7 GPIO_ACTIVE_LOW>; + pwdn-gpios = <&pioA 13 GPIO_ACTIVE_HIGH>; + clocks = <&pck0>; + clock-names = "xvclk"; + assigned-clocks = <&pck0>; + assigned-clock-rates = <25000000>; status = "okay"; + + port { + ov2640_0: endpoint { + remote-endpoint = <&isi_0>; + bus-width = <8>; + }; + }; }; }; @@ -37,6 +54,15 @@ isi: isi@f8048000 { status = "okay"; + port { + isi_0: endpoint@0 { + reg = <0>; + remote-endpoint = <&ov2640_0>; + bus-width = <8>; + vsync-active = <1>; + hsync-active = <1>; + }; + }; }; }; }; diff --git a/arch/arm/boot/dts/at91sam9g45.dtsi b/arch/arm/boot/dts/at91sam9g45.dtsi index 8837b7e42..b3501ae2a 100644 --- a/arch/arm/boot/dts/at91sam9g45.dtsi +++ b/arch/arm/boot/dts/at91sam9g45.dtsi @@ -1044,28 +1044,24 @@ atmel,adc-res-names = "lowres", "highres"; atmel,adc-use-res = "highres"; - trigger@0 { - reg = <0>; + trigger0 { trigger-name = "external-rising"; trigger-value = <0x1>; trigger-external; }; - trigger@1 { - reg = <1>; + trigger1 { trigger-name = "external-falling"; trigger-value = <0x2>; trigger-external; }; - trigger@2 { - reg = <2>; + trigger2 { trigger-name = "external-any"; trigger-value = <0x3>; trigger-external; }; - trigger@3 { - reg = <3>; + trigger3 { trigger-name = "continuous"; trigger-value = <0x6>; }; @@ -1169,13 +1165,13 @@ clock-names = "pclk", "hclk"; status = "disabled"; - ep0 { + ep@0 { reg = <0>; atmel,fifo-size = <64>; atmel,nb-banks = <1>; }; - ep1 { + ep@1 { reg = <1>; atmel,fifo-size = <1024>; atmel,nb-banks = <2>; @@ -1183,7 +1179,7 @@ atmel,can-isoc; }; - ep2 { + ep@2 { reg = <2>; atmel,fifo-size = <1024>; atmel,nb-banks = <2>; @@ -1191,21 +1187,21 @@ atmel,can-isoc; }; - ep3 { + ep@3 { reg = <3>; atmel,fifo-size = <1024>; atmel,nb-banks = <3>; atmel,can-dma; }; - ep4 { + ep@4 { reg = <4>; atmel,fifo-size = <1024>; atmel,nb-banks = <3>; atmel,can-dma; }; - ep5 { + ep@5 { reg = <5>; atmel,fifo-size = <1024>; atmel,nb-banks = <3>; @@ -1213,7 +1209,7 @@ atmel,can-isoc; }; - ep6 { + ep@6 { reg = <6>; atmel,fifo-size = <1024>; atmel,nb-banks = <3>; @@ -1320,7 +1316,7 @@ }; }; - i2c@0 { + i2c-gpio-0 { compatible = "i2c-gpio"; gpios = <&pioA 20 GPIO_ACTIVE_HIGH /* sda */ &pioA 21 GPIO_ACTIVE_HIGH /* scl */ diff --git a/arch/arm/boot/dts/at91sam9n12.dtsi b/arch/arm/boot/dts/at91sam9n12.dtsi index 95569a87b..3b3eb3edc 100644 --- a/arch/arm/boot/dts/at91sam9n12.dtsi +++ b/arch/arm/boot/dts/at91sam9n12.dtsi @@ -1030,7 +1030,7 @@ }; }; - i2c@0 { + i2c-gpio-0 { compatible = "i2c-gpio"; gpios = <&pioA 30 GPIO_ACTIVE_HIGH /* sda */ &pioA 31 GPIO_ACTIVE_HIGH /* scl */ diff --git a/arch/arm/boot/dts/at91sam9rl.dtsi b/arch/arm/boot/dts/at91sam9rl.dtsi index 6d829db4e..70adf940d 100644 --- a/arch/arm/boot/dts/at91sam9rl.dtsi +++ b/arch/arm/boot/dts/at91sam9rl.dtsi @@ -265,25 +265,21 @@ atmel,adc-res-names = "lowres", "highres"; atmel,adc-use-res = "highres"; - trigger@0 { - reg = <0>; + trigger0 { trigger-name = "timer-counter-0"; trigger-value = <0x1>; }; - trigger@1 { - reg = <1>; + trigger1 { trigger-name = "timer-counter-1"; trigger-value = <0x3>; }; - trigger@2 { - reg = <2>; + trigger2 { trigger-name = "timer-counter-2"; trigger-value = <0x5>; }; - trigger@3 { - reg = <3>; + trigger3 { trigger-name = "external"; trigger-value = <0x13>; trigger-external; @@ -301,13 +297,13 @@ clock-names = "pclk", "hclk"; status = "disabled"; - ep0 { + ep@0 { reg = <0>; atmel,fifo-size = <64>; atmel,nb-banks = <1>; }; - ep1 { + ep@1 { reg = <1>; atmel,fifo-size = <1024>; atmel,nb-banks = <2>; @@ -315,7 +311,7 @@ atmel,can-isoc; }; - ep2 { + ep@2 { reg = <2>; atmel,fifo-size = <1024>; atmel,nb-banks = <2>; @@ -323,21 +319,21 @@ atmel,can-isoc; }; - ep3 { + ep@3 { reg = <3>; atmel,fifo-size = <1024>; atmel,nb-banks = <3>; atmel,can-dma; }; - ep4 { + ep@4 { reg = <4>; atmel,fifo-size = <1024>; atmel,nb-banks = <3>; atmel,can-dma; }; - ep5 { + ep@5 { reg = <5>; atmel,fifo-size = <1024>; atmel,nb-banks = <3>; @@ -345,7 +341,7 @@ atmel,can-isoc; }; - ep6 { + ep@6 { reg = <6>; atmel,fifo-size = <1024>; atmel,nb-banks = <3>; @@ -1093,7 +1089,7 @@ }; }; - i2c@0 { + i2c-gpio-0 { compatible = "i2c-gpio"; gpios = <&pioA 23 GPIO_ACTIVE_HIGH>, /* sda */ <&pioA 24 GPIO_ACTIVE_HIGH>; /* scl */ @@ -1107,7 +1103,7 @@ status = "disabled"; }; - i2c@1 { + i2c-gpio-1 { compatible = "i2c-gpio"; gpios = <&pioD 10 GPIO_ACTIVE_HIGH>, /* sda */ <&pioD 11 GPIO_ACTIVE_HIGH>; /* scl */ diff --git a/arch/arm/boot/dts/at91sam9rlek.dts b/arch/arm/boot/dts/at91sam9rlek.dts index f10566f75..2e567d90f 100644 --- a/arch/arm/boot/dts/at91sam9rlek.dts +++ b/arch/arm/boot/dts/at91sam9rlek.dts @@ -227,11 +227,11 @@ }; }; - i2c@0 { + i2c-gpio-0 { status = "okay"; }; - i2c@1 { + i2c-gpio-1 { status = "okay"; }; }; diff --git a/arch/arm/boot/dts/at91sam9x5.dtsi b/arch/arm/boot/dts/at91sam9x5.dtsi index cd0cd5fd0..ed4e4bd8a 100644 --- a/arch/arm/boot/dts/at91sam9x5.dtsi +++ b/arch/arm/boot/dts/at91sam9x5.dtsi @@ -1048,29 +1048,25 @@ atmel,adc-res-names = "lowres", "highres"; atmel,adc-use-res = "highres"; - trigger@0 { - reg = <0>; + trigger0 { trigger-name = "external-rising"; trigger-value = <0x1>; trigger-external; }; - trigger@1 { - reg = <1>; + trigger1 { trigger-name = "external-falling"; trigger-value = <0x2>; trigger-external; }; - trigger@2 { - reg = <2>; + trigger2 { trigger-name = "external-any"; trigger-value = <0x3>; trigger-external; }; - trigger@3 { - reg = <3>; + trigger3 { trigger-name = "continuous"; trigger-value = <0x6>; }; @@ -1119,13 +1115,13 @@ clock-names = "hclk", "pclk"; status = "disabled"; - ep0 { + ep@0 { reg = <0>; atmel,fifo-size = <64>; atmel,nb-banks = <1>; }; - ep1 { + ep@1 { reg = <1>; atmel,fifo-size = <1024>; atmel,nb-banks = <2>; @@ -1133,7 +1129,7 @@ atmel,can-isoc; }; - ep2 { + ep@2 { reg = <2>; atmel,fifo-size = <1024>; atmel,nb-banks = <2>; @@ -1141,21 +1137,21 @@ atmel,can-isoc; }; - ep3 { + ep@3 { reg = <3>; atmel,fifo-size = <1024>; atmel,nb-banks = <3>; atmel,can-dma; }; - ep4 { + ep@4 { reg = <4>; atmel,fifo-size = <1024>; atmel,nb-banks = <3>; atmel,can-dma; }; - ep5 { + ep@5 { reg = <5>; atmel,fifo-size = <1024>; atmel,nb-banks = <3>; @@ -1163,7 +1159,7 @@ atmel,can-isoc; }; - ep6 { + ep@6 { reg = <6>; atmel,fifo-size = <1024>; atmel,nb-banks = <3>; @@ -1242,7 +1238,7 @@ }; }; - i2c@0 { + i2c-gpio-0 { compatible = "i2c-gpio"; gpios = <&pioA 30 GPIO_ACTIVE_HIGH /* sda */ &pioA 31 GPIO_ACTIVE_HIGH /* scl */ @@ -1257,7 +1253,7 @@ status = "disabled"; }; - i2c@1 { + i2c-gpio-1 { compatible = "i2c-gpio"; gpios = <&pioC 0 GPIO_ACTIVE_HIGH /* sda */ &pioC 1 GPIO_ACTIVE_HIGH /* scl */ @@ -1272,7 +1268,7 @@ status = "disabled"; }; - i2c@2 { + i2c-gpio-2 { compatible = "i2c-gpio"; gpios = <&pioB 4 GPIO_ACTIVE_HIGH /* sda */ &pioB 5 GPIO_ACTIVE_HIGH /* scl */ diff --git a/arch/arm/boot/dts/at91sam9x5ek.dtsi b/arch/arm/boot/dts/at91sam9x5ek.dtsi index 52425a4ca..696b8ba06 100644 --- a/arch/arm/boot/dts/at91sam9x5ek.dtsi +++ b/arch/arm/boot/dts/at91sam9x5ek.dtsi @@ -60,18 +60,6 @@ status = "okay"; }; - isi: isi@f8048000 { - status = "disabled"; - port { - isi_0: endpoint@0 { - remote-endpoint = <&ov2640_0>; - bus-width = <8>; - vsync-active = <1>; - hsync-active = <1>; - }; - }; - }; - i2c0: i2c@f8010000 { status = "okay"; @@ -79,27 +67,6 @@ compatible = "wm8731"; reg = <0x1a>; }; - - ov2640: camera@0x30 { - compatible = "ovti,ov2640"; - reg = <0x30>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_pck0_as_isi_mck &pinctrl_sensor_power &pinctrl_sensor_reset>; - resetb-gpios = <&pioA 7 GPIO_ACTIVE_LOW>; - pwdn-gpios = <&pioA 13 GPIO_ACTIVE_HIGH>; - clocks = <&pck0>; - clock-names = "xvclk"; - assigned-clocks = <&pck0>; - assigned-clock-rates = <25000000>; - status = "disabled"; - - port { - ov2640_0: endpoint { - remote-endpoint = <&isi_0>; - bus-width = <8>; - }; - }; - }; }; adc0: adc@f804c000 { diff --git a/arch/arm/boot/dts/axp209.dtsi b/arch/arm/boot/dts/axp209.dtsi index 051ab3ba9..afbe89c01 100644 --- a/arch/arm/boot/dts/axp209.dtsi +++ b/arch/arm/boot/dts/axp209.dtsi @@ -87,6 +87,7 @@ reg_ldo5: ldo5 { regulator-name = "ldo5"; + status = "disabled"; }; }; diff --git a/arch/arm/boot/dts/axp22x.dtsi b/arch/arm/boot/dts/axp22x.dtsi index 76302f58c..458b6681e 100644 --- a/arch/arm/boot/dts/axp22x.dtsi +++ b/arch/arm/boot/dts/axp22x.dtsi @@ -126,10 +126,12 @@ reg_ldo_io0: ldo_io0 { regulator-name = "ldo_io0"; + status = "disabled"; }; reg_ldo_io1: ldo_io1 { regulator-name = "ldo_io1"; + status = "disabled"; }; reg_rtc_ldo: rtc_ldo { @@ -139,5 +141,15 @@ regulator-max-microvolt = <3000000>; regulator-name = "rtc_ldo"; }; + + reg_drivevbus: drivevbus { + regulator-name = "drivevbus"; + status = "disabled"; + }; + }; + + usb_power_supply: usb_power_supply { + compatible = "x-powers,axp221-usb-power-supply"; + status = "disabled"; }; }; diff --git a/arch/arm/boot/dts/axp809.dtsi b/arch/arm/boot/dts/axp809.dtsi new file mode 100644 index 000000000..ab8e5f2d9 --- /dev/null +++ b/arch/arm/boot/dts/axp809.dtsi @@ -0,0 +1,53 @@ +/* + * Copyright 2015 Chen-Yu Tsai + * + * Chen-Yu Tsai <wens@csie.org> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/* + * AXP809 Integrated Power Management Chip + */ + +&axp809 { + compatible = "x-powers,axp809"; + interrupt-controller; + #interrupt-cells = <1>; +}; diff --git a/arch/arm/boot/dts/bcm-cygnus.dtsi b/arch/arm/boot/dts/bcm-cygnus.dtsi index b42fe5596..fabc9f36c 100644 --- a/arch/arm/boot/dts/bcm-cygnus.dtsi +++ b/arch/arm/boot/dts/bcm-cygnus.dtsi @@ -366,5 +366,16 @@ interrupts = <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>; status = "disabled"; }; + + adc: adc@180a6000 { + compatible = "brcm,iproc-static-adc"; + #io-channel-cells = <1>; + io-channel-ranges; + adc-syscon = <&ts_adc_syscon>; + clocks = <&asiu_clks BCM_CYGNUS_ASIU_ADC_CLK>; + clock-names = "tsc_clk"; + interrupts = <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; }; }; diff --git a/arch/arm/boot/dts/bcm-nsp.dtsi b/arch/arm/boot/dts/bcm-nsp.dtsi index def9e783b..c3bf7d23f 100644 --- a/arch/arm/boot/dts/bcm-nsp.dtsi +++ b/arch/arm/boot/dts/bcm-nsp.dtsi @@ -57,7 +57,7 @@ compatible = "arm,cortex-a9"; next-level-cache = <&L2>; enable-method = "brcm,bcm-nsp-smp"; - secondary-boot-reg = <0xffff042c>; + secondary-boot-reg = <0xffff0fec>; reg = <0x1>; }; }; @@ -192,6 +192,23 @@ status = "disabled"; }; + dma@20000 { + compatible = "arm,pl330", "arm,primecell"; + reg = <0x20000 0x1000>; + interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&iprocslow>; + clock-names = "apb_pclk"; + #dma-cells = <1>; + }; + nand: nand@26000 { compatible = "brcm,nand-iproc", "brcm,brcmnand-v6.1"; reg = <0x026000 0x600>, @@ -206,6 +223,11 @@ brcm,nand-has-wp; }; + rng: rng@33000 { + compatible = "brcm,bcm-nsp-rng"; + reg = <0x33000 0x14>; + }; + ccbtimer0: timer@34000 { compatible = "arm,sp804"; reg = <0x34000 0x1000>; @@ -266,6 +288,48 @@ <0x30028 0x04>, <0x3f408 0x04>; }; + + sata_phy: sata_phy@40100 { + compatible = "brcm,iproc-nsp-sata-phy"; + reg = <0x40100 0x340>; + reg-names = "phy"; + #address-cells = <1>; + #size-cells = <0>; + + sata_phy0: sata-phy@0 { + reg = <0>; + #phy-cells = <0>; + status = "disabled"; + }; + + sata_phy1: sata-phy@1 { + reg = <1>; + #phy-cells = <0>; + status = "disabled"; + }; + }; + + sata: ahci@41000 { + compatible = "brcm,bcm-nsp-ahci"; + reg-names = "ahci", "top-ctrl"; + reg = <0x41000 0x1000>, <0x40020 0x1c>; + interrupts = <GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + + sata0: sata-port@0 { + reg = <0>; + phys = <&sata_phy0>; + phy-names = "sata-phy"; + }; + + sata1: sata-port@1 { + reg = <1>; + phys = <&sata_phy1>; + phy-names = "sata-phy"; + }; + }; }; pcie0: pcie@18012000 { @@ -290,6 +354,18 @@ ranges = <0x82000000 0 0x08000000 0x08000000 0 0x8000000>; status = "disabled"; + + msi-parent = <&msi0>; + msi0: msi@18012000 { + compatible = "brcm,iproc-msi"; + msi-controller; + interrupt-parent = <&gic>; + interrupts = <GIC_SPI 127 IRQ_TYPE_NONE>, + <GIC_SPI 128 IRQ_TYPE_NONE>, + <GIC_SPI 129 IRQ_TYPE_NONE>, + <GIC_SPI 130 IRQ_TYPE_NONE>; + brcm,pcie-msi-inten; + }; }; pcie1: pcie@18013000 { @@ -314,6 +390,18 @@ ranges = <0x82000000 0 0x40000000 0x40000000 0 0x8000000>; status = "disabled"; + + msi-parent = <&msi1>; + msi1: msi@18013000 { + compatible = "brcm,iproc-msi"; + msi-controller; + interrupt-parent = <&gic>; + interrupts = <GIC_SPI 133 IRQ_TYPE_NONE>, + <GIC_SPI 134 IRQ_TYPE_NONE>, + <GIC_SPI 135 IRQ_TYPE_NONE>, + <GIC_SPI 136 IRQ_TYPE_NONE>; + brcm,pcie-msi-inten; + }; }; pcie2: pcie@18014000 { @@ -338,5 +426,17 @@ ranges = <0x82000000 0 0x48000000 0x48000000 0 0x8000000>; status = "disabled"; + + msi-parent = <&msi2>; + msi2: msi@18014000 { + compatible = "brcm,iproc-msi"; + msi-controller; + interrupt-parent = <&gic>; + interrupts = <GIC_SPI 139 IRQ_TYPE_NONE>, + <GIC_SPI 140 IRQ_TYPE_NONE>, + <GIC_SPI 141 IRQ_TYPE_NONE>, + <GIC_SPI 142 IRQ_TYPE_NONE>; + brcm,pcie-msi-inten; + }; }; }; diff --git a/arch/arm/boot/dts/bcm11351.dtsi b/arch/arm/boot/dts/bcm11351.dtsi index 3dc7a8cc5..18045c38b 100644 --- a/arch/arm/boot/dts/bcm11351.dtsi +++ b/arch/arm/boot/dts/bcm11351.dtsi @@ -30,7 +30,6 @@ cpus { #address-cells = <1>; #size-cells = <0>; - enable-method = "brcm,bcm11351-cpu-method"; cpu0: cpu@0 { device_type = "cpu"; @@ -41,6 +40,7 @@ cpu1: cpu@1 { device_type = "cpu"; compatible = "arm,cortex-a9"; + enable-method = "brcm,bcm11351-cpu-method"; secondary-boot-reg = <0x3500417c>; reg = <1>; }; diff --git a/arch/arm/boot/dts/bcm21664.dtsi b/arch/arm/boot/dts/bcm21664.dtsi index 3f525be28..6dde95f21 100644 --- a/arch/arm/boot/dts/bcm21664.dtsi +++ b/arch/arm/boot/dts/bcm21664.dtsi @@ -30,7 +30,6 @@ cpus { #address-cells = <1>; #size-cells = <0>; - enable-method = "brcm,bcm11351-cpu-method"; cpu0: cpu@0 { device_type = "cpu"; @@ -41,6 +40,7 @@ cpu1: cpu@1 { device_type = "cpu"; compatible = "arm,cortex-a9"; + enable-method = "brcm,bcm11351-cpu-method"; secondary-boot-reg = <0x35004178>; reg = <1>; }; diff --git a/arch/arm/boot/dts/bcm23550-sparrow.dts b/arch/arm/boot/dts/bcm23550-sparrow.dts new file mode 100644 index 000000000..4d525ccb4 --- /dev/null +++ b/arch/arm/boot/dts/bcm23550-sparrow.dts @@ -0,0 +1,80 @@ +/* + * BSD LICENSE + * + * Copyright(c) 2016 Broadcom. All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * * Neither the name of Broadcom Corporation nor the names of its + * contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +/dts-v1/; + +#include <dt-bindings/gpio/gpio.h> + +#include "bcm23550.dtsi" + +/ { + model = "BCM23550 Sparrow board"; + compatible = "brcm,bcm23550-sparrow", "brcm,bcm23550"; + + chosen { + stdout-path = "/slaves@3e000000/serial@0:115200n8"; + bootargs = "console=ttyS0,115200n8"; + }; + + memory { + reg = <0x80000000 0x20000000>; /* 512 MB */ + }; +}; + +&uartb { + status = "okay"; +}; + +&usbotg { + status = "okay"; +}; + +&usbphy { + status = "okay"; +}; + +&sdio1 { + max-frequency = <48000000>; + status = "okay"; +}; + +&sdio2 { + non-removable; + max-frequency = <48000000>; + status = "okay"; +}; + +&sdio4 { + max-frequency = <48000000>; + cd-gpios = <&gpio 91 GPIO_ACTIVE_LOW>; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/bcm23550.dtsi b/arch/arm/boot/dts/bcm23550.dtsi new file mode 100644 index 000000000..a7a643f38 --- /dev/null +++ b/arch/arm/boot/dts/bcm23550.dtsi @@ -0,0 +1,415 @@ +/* + * BSD LICENSE + * + * Copyright(c) 2016 Broadcom. All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * * Neither the name of Broadcom Corporation nor the names of its + * contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +#include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/interrupt-controller/irq.h> + +/* BCM23550 and BCM21664 have almost identical clocks */ +#include "dt-bindings/clock/bcm21664.h" + +#include "skeleton.dtsi" + +/ { + model = "BCM23550 SoC"; + compatible = "brcm,bcm23550"; + interrupt-parent = <&gic>; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu0: cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a7"; + reg = <0>; + clock-frequency = <1000000000>; + }; + + cpu1: cpu@1 { + device_type = "cpu"; + compatible = "arm,cortex-a7"; + enable-method = "brcm,bcm23550"; + secondary-boot-reg = <0x35004178>; + reg = <1>; + clock-frequency = <1000000000>; + }; + + cpu2: cpu@2 { + device_type = "cpu"; + compatible = "arm,cortex-a7"; + enable-method = "brcm,bcm23550"; + secondary-boot-reg = <0x35004178>; + reg = <2>; + clock-frequency = <1000000000>; + }; + + cpu3: cpu@3 { + device_type = "cpu"; + compatible = "arm,cortex-a7"; + enable-method = "brcm,bcm23550"; + secondary-boot-reg = <0x35004178>; + reg = <3>; + clock-frequency = <1000000000>; + }; + }; + + /* Hub bus */ + hub@34000000 { + compatible = "simple-bus"; + ranges = <0 0x34000000 0x102f83ac>; + #address-cells = <1>; + #size-cells = <1>; + + smc@4e000 { + compatible = "brcm,bcm23550-smc", "brcm,kona-smc"; + reg = <0x0004e000 0x400>; /* 1 KiB in SRAM */ + }; + + resetmgr: reset-controller@1001f00 { + compatible = "brcm,bcm21664-resetmgr"; + reg = <0x01001f00 0x24>; + }; + + gpio: gpio@1003000 { + compatible = "brcm,bcm23550-gpio", "brcm,kona-gpio"; + reg = <0x01003000 0x524>; + interrupts = + <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>; + #gpio-cells = <2>; + #interrupt-cells = <2>; + gpio-controller; + interrupt-controller; + }; + + timer@1006000 { + compatible = "brcm,kona-timer"; + reg = <0x01006000 0x1c>; + interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&aon_ccu BCM21664_AON_CCU_HUB_TIMER>; + }; + }; + + /* Slaves bus */ + slaves@3e000000 { + compatible = "simple-bus"; + ranges = <0 0x3e000000 0x0001c070>; + #address-cells = <1>; + #size-cells = <1>; + + uartb: serial@0 { + compatible = "snps,dw-apb-uart"; + status = "disabled"; + reg = <0x00000000 0x118>; + clocks = <&slave_ccu BCM21664_SLAVE_CCU_UARTB>; + interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>; + reg-shift = <2>; + reg-io-width = <4>; + }; + + uartb2: serial@1000 { + compatible = "snps,dw-apb-uart"; + status = "disabled"; + reg = <0x00001000 0x118>; + clocks = <&slave_ccu BCM21664_SLAVE_CCU_UARTB2>; + interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>; + reg-shift = <2>; + reg-io-width = <4>; + }; + + uartb3: serial@2000 { + compatible = "snps,dw-apb-uart"; + status = "disabled"; + reg = <0x00002000 0x118>; + clocks = <&slave_ccu BCM21664_SLAVE_CCU_UARTB3>; + interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>; + reg-shift = <2>; + reg-io-width = <4>; + }; + + bsc1: i2c@16000 { + compatible = "brcm,kona-i2c"; + reg = <0x00016000 0x70>; + interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&slave_ccu BCM21664_SLAVE_CCU_BSC1>; + status = "disabled"; + }; + + bsc2: i2c@17000 { + compatible = "brcm,kona-i2c"; + reg = <0x00017000 0x70>; + interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&slave_ccu BCM21664_SLAVE_CCU_BSC2>; + status = "disabled"; + }; + + bsc3: i2c@18000 { + compatible = "brcm,kona-i2c"; + reg = <0x00018000 0x70>; + interrupts = <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&slave_ccu BCM21664_SLAVE_CCU_BSC3>; + status = "disabled"; + }; + + bsc4: i2c@1c000 { + compatible = "brcm,kona-i2c"; + reg = <0x0001c000 0x70>; + interrupts = <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&slave_ccu BCM21664_SLAVE_CCU_BSC4>; + status = "disabled"; + }; + }; + + /* Apps bus */ + apps@3e300000 { + compatible = "simple-bus"; + ranges = <0 0x3e300000 0x01b77000>; + #address-cells = <1>; + #size-cells = <1>; + + usbotg: usb@e20000 { + compatible = "snps,dwc2"; + reg = <0x00e20000 0x10000>; + interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&usb_otg_ahb_clk>; + clock-names = "otg"; + phys = <&usbphy>; + phy-names = "usb2-phy"; + status = "disabled"; + }; + + usbphy: usb-phy@e30000 { + compatible = "brcm,kona-usb2-phy"; + reg = <0x00e30000 0x28>; + #phy-cells = <0>; + status = "disabled"; + }; + + sdio1: sdio@e80000 { + compatible = "brcm,kona-sdhci"; + reg = <0x00e80000 0x801c>; + interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&master_ccu BCM21664_MASTER_CCU_SDIO1>; + status = "disabled"; + }; + + sdio2: sdio@e90000 { + compatible = "brcm,kona-sdhci"; + reg = <0x00e90000 0x801c>; + interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&master_ccu BCM21664_MASTER_CCU_SDIO2>; + status = "disabled"; + }; + + sdio3: sdio@ea0000 { + compatible = "brcm,kona-sdhci"; + reg = <0x00ea0000 0x801c>; + interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&master_ccu BCM21664_MASTER_CCU_SDIO3>; + status = "disabled"; + }; + + sdio4: sdio@eb0000 { + compatible = "brcm,kona-sdhci"; + reg = <0x00eb0000 0x801c>; + interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&master_ccu BCM21664_MASTER_CCU_SDIO4>; + status = "disabled"; + }; + + cdc: cdc@1b0e000 { + compatible = "brcm,bcm23550-cdc"; + reg = <0x01b0e000 0x78>; + }; + + gic: interrupt-controller@1b21000 { + compatible = "arm,cortex-a9-gic"; + #interrupt-cells = <3>; + #address-cells = <0>; + interrupt-controller; + reg = <0x01b21000 0x1000>, + <0x01b22000 0x1000>; + }; + }; + + clocks { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + /* + * Fixed clocks are defined before CCUs whose + * clocks may depend on them. + */ + + ref_32k_clk: ref_32k { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <32768>; + }; + + bbl_32k_clk: bbl_32k { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <32768>; + }; + + ref_13m_clk: ref_13m { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <13000000>; + }; + + var_13m_clk: var_13m { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <13000000>; + }; + + dft_19_5m_clk: dft_19_5m { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <19500000>; + }; + + ref_crystal_clk: ref_crystal { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <26000000>; + }; + + ref_52m_clk: ref_52m { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <52000000>; + }; + + var_52m_clk: var_52m { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <52000000>; + }; + + usb_otg_ahb_clk: usb_otg_ahb { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <52000000>; + }; + + ref_96m_clk: ref_96m { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <96000000>; + }; + + var_96m_clk: var_96m { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <96000000>; + }; + + ref_104m_clk: ref_104m { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <104000000>; + }; + + var_104m_clk: var_104m { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <104000000>; + }; + + ref_156m_clk: ref_156m { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <156000000>; + }; + + var_156m_clk: var_156m { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <156000000>; + }; + + root_ccu: root_ccu { + compatible = BCM21664_DT_ROOT_CCU_COMPAT; + reg = <0x35001000 0x0f00>; + #clock-cells = <1>; + clock-output-names = "frac_1m"; + }; + + aon_ccu: aon_ccu { + compatible = BCM21664_DT_AON_CCU_COMPAT; + reg = <0x35002000 0x0f00>; + #clock-cells = <1>; + clock-output-names = "hub_timer"; + }; + + slave_ccu: slave_ccu { + compatible = BCM21664_DT_SLAVE_CCU_COMPAT; + reg = <0x3e011000 0x0f00>; + #clock-cells = <1>; + clock-output-names = "uartb", + "uartb2", + "uartb3", + "bsc1", + "bsc2", + "bsc3", + "bsc4"; + }; + + master_ccu: master_ccu { + compatible = BCM21664_DT_MASTER_CCU_COMPAT; + reg = <0x3f001000 0x0f00>; + #clock-cells = <1>; + clock-output-names = "sdio1", + "sdio2", + "sdio3", + "sdio4", + "sdio1_sleep", + "sdio2_sleep", + "sdio3_sleep", + "sdio4_sleep"; + }; + }; +}; diff --git a/arch/arm/boot/dts/bcm2835-rpi-b-plus.dts b/arch/arm/boot/dts/bcm2835-rpi-b-plus.dts index 57d313b6a..d5fdb8e76 100644 --- a/arch/arm/boot/dts/bcm2835-rpi-b-plus.dts +++ b/arch/arm/boot/dts/bcm2835-rpi-b-plus.dts @@ -1,6 +1,7 @@ /dts-v1/; #include "bcm2835.dtsi" #include "bcm2835-rpi.dtsi" +#include "bcm283x-rpi-smsc9514.dtsi" / { compatible = "raspberrypi,model-b-plus", "brcm,bcm2835"; diff --git a/arch/arm/boot/dts/bcm2835-rpi-b-rev2.dts b/arch/arm/boot/dts/bcm2835-rpi-b-rev2.dts index cf2774ec0..bfc4bd9b7 100644 --- a/arch/arm/boot/dts/bcm2835-rpi-b-rev2.dts +++ b/arch/arm/boot/dts/bcm2835-rpi-b-rev2.dts @@ -1,6 +1,7 @@ /dts-v1/; #include "bcm2835.dtsi" #include "bcm2835-rpi.dtsi" +#include "bcm283x-rpi-smsc9512.dtsi" / { compatible = "raspberrypi,model-b-rev2", "brcm,bcm2835"; diff --git a/arch/arm/boot/dts/bcm2835-rpi-b.dts b/arch/arm/boot/dts/bcm2835-rpi-b.dts index 8b15f9c35..0371bb737 100644 --- a/arch/arm/boot/dts/bcm2835-rpi-b.dts +++ b/arch/arm/boot/dts/bcm2835-rpi-b.dts @@ -1,6 +1,7 @@ /dts-v1/; #include "bcm2835.dtsi" #include "bcm2835-rpi.dtsi" +#include "bcm283x-rpi-smsc9512.dtsi" / { compatible = "raspberrypi,model-b", "brcm,bcm2835"; diff --git a/arch/arm/boot/dts/bcm2835-rpi.dtsi b/arch/arm/boot/dts/bcm2835-rpi.dtsi index caf270768..e9b47b2bb 100644 --- a/arch/arm/boot/dts/bcm2835-rpi.dtsi +++ b/arch/arm/boot/dts/bcm2835-rpi.dtsi @@ -2,6 +2,7 @@ / { memory { + device_type = "memory"; reg = <0 0x10000000>; }; diff --git a/arch/arm/boot/dts/bcm2836-rpi-2-b.dts b/arch/arm/boot/dts/bcm2836-rpi-2-b.dts index c4743f422..29e1cfe8e 100644 --- a/arch/arm/boot/dts/bcm2836-rpi-2-b.dts +++ b/arch/arm/boot/dts/bcm2836-rpi-2-b.dts @@ -1,6 +1,7 @@ /dts-v1/; #include "bcm2836.dtsi" #include "bcm2835-rpi.dtsi" +#include "bcm283x-rpi-smsc9514.dtsi" / { compatible = "raspberrypi,2-model-b", "brcm,bcm2836"; diff --git a/arch/arm/boot/dts/bcm283x-rpi-smsc9512.dtsi b/arch/arm/boot/dts/bcm283x-rpi-smsc9512.dtsi new file mode 100644 index 000000000..12c981e51 --- /dev/null +++ b/arch/arm/boot/dts/bcm283x-rpi-smsc9512.dtsi @@ -0,0 +1,19 @@ +/ { + aliases { + ethernet = ðernet; + }; +}; + +&usb { + usb1@1 { + compatible = "usb424,9512"; + reg = <1>; + #address-cells = <1>; + #size-cells = <0>; + + ethernet: usbether@1 { + compatible = "usb424,ec00"; + reg = <1>; + }; + }; +}; diff --git a/arch/arm/boot/dts/bcm283x-rpi-smsc9514.dtsi b/arch/arm/boot/dts/bcm283x-rpi-smsc9514.dtsi new file mode 100644 index 000000000..3f0a56ebc --- /dev/null +++ b/arch/arm/boot/dts/bcm283x-rpi-smsc9514.dtsi @@ -0,0 +1,19 @@ +/ { + aliases { + ethernet = ðernet; + }; +}; + +&usb { + usb1@1 { + compatible = "usb424,9514"; + reg = <1>; + #address-cells = <1>; + #size-cells = <0>; + + ethernet: usbether@1 { + compatible = "usb424,ec00"; + reg = <1>; + }; + }; +}; diff --git a/arch/arm/boot/dts/bcm283x.dtsi b/arch/arm/boot/dts/bcm283x.dtsi index 10b27b912..445624a1a 100644 --- a/arch/arm/boot/dts/bcm283x.dtsi +++ b/arch/arm/boot/dts/bcm283x.dtsi @@ -2,7 +2,6 @@ #include <dt-bindings/clock/bcm2835.h> #include <dt-bindings/clock/bcm2835-aux.h> #include <dt-bindings/gpio/gpio.h> -#include "skeleton.dtsi" /* This include file covers the common peripherals and configuration between * bcm2835 and bcm2836 implementations, leaving the CPU configuration to @@ -13,6 +12,8 @@ compatible = "brcm,bcm2835"; model = "BCM2835"; interrupt-parent = <&intc>; + #address-cells = <1>; + #size-cells = <1>; chosen { bootargs = "earlyprintk console=ttyAMA0"; @@ -287,6 +288,8 @@ compatible = "brcm,bcm2835-usb"; reg = <0x7e980000 0x10000>; interrupts = <1 9>; + #address-cells = <1>; + #size-cells = <0>; }; v3d: v3d@7ec00000 { diff --git a/arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts b/arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts index 5087aa81e..9cb186ea2 100644 --- a/arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts +++ b/arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts @@ -147,3 +147,7 @@ &usb3 { vcc-gpio = <&chipcommon 10 GPIO_ACTIVE_LOW>; }; + +&spi_nor { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/bcm4708-netgear-r6250.dts b/arch/arm/boot/dts/bcm4708-netgear-r6250.dts index 1049ab108..8ce39d58e 100644 --- a/arch/arm/boot/dts/bcm4708-netgear-r6250.dts +++ b/arch/arm/boot/dts/bcm4708-netgear-r6250.dts @@ -90,3 +90,7 @@ &usb3 { vcc-gpio = <&chipcommon 0 GPIO_ACTIVE_HIGH>; }; + +&spi_nor { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/bcm4708-netgear-r6300-v2.dts b/arch/arm/boot/dts/bcm4708-netgear-r6300-v2.dts index 3a94606d0..6229ef283 100644 --- a/arch/arm/boot/dts/bcm4708-netgear-r6300-v2.dts +++ b/arch/arm/boot/dts/bcm4708-netgear-r6300-v2.dts @@ -82,3 +82,7 @@ }; }; }; + +&spi_nor { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/bcm4708-smartrg-sr400ac.dts b/arch/arm/boot/dts/bcm4708-smartrg-sr400ac.dts index 8b0c440b2..70f4bb9d8 100644 --- a/arch/arm/boot/dts/bcm4708-smartrg-sr400ac.dts +++ b/arch/arm/boot/dts/bcm4708-smartrg-sr400ac.dts @@ -126,3 +126,43 @@ &spi_nor { status = "okay"; }; + +&srab { + status = "okay"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + label = "lan4"; + }; + + port@1 { + reg = <1>; + label = "lan3"; + }; + + port@2 { + reg = <2>; + label = "lan2"; + }; + + port@3 { + reg = <3>; + label = "lan1"; + }; + + port@4 { + reg = <4>; + label = "wan"; + }; + + port@5 { + reg = <5>; + label = "cpu"; + ethernet = <&gmac0>; + }; + }; +}; diff --git a/arch/arm/boot/dts/bcm4709-buffalo-wxr-1900dhp.dts b/arch/arm/boot/dts/bcm4709-buffalo-wxr-1900dhp.dts index 791d7225c..0653e7ef2 100644 --- a/arch/arm/boot/dts/bcm4709-buffalo-wxr-1900dhp.dts +++ b/arch/arm/boot/dts/bcm4709-buffalo-wxr-1900dhp.dts @@ -131,3 +131,7 @@ &usb2 { vcc-gpio = <&chipcommon 13 GPIO_ACTIVE_HIGH>; }; + +&spi_nor { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts b/arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts index ace38efd2..c8c0b3616 100644 --- a/arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts +++ b/arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts @@ -10,7 +10,7 @@ /dts-v1/; #include "bcm4708.dtsi" -#include "bcm5301x-nand-cs0-bch8.dtsi" +#include "bcm5301x-nand-cs0-bch1.dtsi" / { compatible = "dlink,dir-885l", "brcm,bcm47094", "brcm,bcm4708"; @@ -113,3 +113,7 @@ &usb3 { vcc-gpio = <&chipcommon 18 GPIO_ACTIVE_HIGH>; }; + +&spi_nor { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/bcm5301x-nand-cs0-bch1.dtsi b/arch/arm/boot/dts/bcm5301x-nand-cs0-bch1.dtsi new file mode 100644 index 000000000..24b099c00 --- /dev/null +++ b/arch/arm/boot/dts/bcm5301x-nand-cs0-bch1.dtsi @@ -0,0 +1,15 @@ +/* + * Broadcom Northstar NAND. + * + * Copyright (C) 2016 RafaÅ‚ MiÅ‚ecki <rafal.milecki@gmail.com> + * + * Licensed under the ISC license. + */ + +#include "bcm5301x-nand-cs0.dtsi" + +&nandcs { + nand-ecc-algo = "bch"; + nand-ecc-strength = <1>; + nand-ecc-step-size = <512>; +}; diff --git a/arch/arm/boot/dts/bcm5301x-nand-cs0-bch8.dtsi b/arch/arm/boot/dts/bcm5301x-nand-cs0-bch8.dtsi index d10781e36..9a9630ded 100644 --- a/arch/arm/boot/dts/bcm5301x-nand-cs0-bch8.dtsi +++ b/arch/arm/boot/dts/bcm5301x-nand-cs0-bch8.dtsi @@ -9,16 +9,10 @@ * Licensed under the GNU/GPL. See COPYING for details. */ -/ { - nand@18028000 { - nandcs@0 { - compatible = "brcm,nandcs"; - reg = <0>; - #address-cells = <1>; - #size-cells = <1>; +#include "bcm5301x-nand-cs0.dtsi" - nand-ecc-strength = <8>; - nand-ecc-step-size = <512>; - }; - }; +&nandcs { + nand-ecc-algo = "bch"; + nand-ecc-strength = <8>; + nand-ecc-step-size = <512>; }; diff --git a/arch/arm/boot/dts/bcm5301x-nand-cs0.dtsi b/arch/arm/boot/dts/bcm5301x-nand-cs0.dtsi new file mode 100644 index 000000000..168495106 --- /dev/null +++ b/arch/arm/boot/dts/bcm5301x-nand-cs0.dtsi @@ -0,0 +1,18 @@ +/* + * Broadcom Northstar NAND. + * + * Copyright (C) 2015 Hauke Mehrtens <hauke@hauke-m.de> + * + * Licensed under the GNU/GPL. See COPYING for details. + */ + +/ { + nand@18028000 { + nandcs: nandcs@0 { + compatible = "brcm,nandcs"; + reg = <0>; + #address-cells = <1>; + #size-cells = <1>; + }; + }; +}; diff --git a/arch/arm/boot/dts/bcm5301x.dtsi b/arch/arm/boot/dts/bcm5301x.dtsi index 7d4d29bf0..8af47913b 100644 --- a/arch/arm/boot/dts/bcm5301x.dtsi +++ b/arch/arm/boot/dts/bcm5301x.dtsi @@ -153,6 +153,21 @@ /* ChipCommon */ <0x00000000 0 &gic GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>, + /* Switch Register Access Block */ + <0x00007000 0 &gic GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>, + <0x00007000 1 &gic GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>, + <0x00007000 2 &gic GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>, + <0x00007000 3 &gic GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>, + <0x00007000 4 &gic GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>, + <0x00007000 5 &gic GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>, + <0x00007000 6 &gic GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>, + <0x00007000 7 &gic GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>, + <0x00007000 8 &gic GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>, + <0x00007000 9 &gic GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>, + <0x00007000 10 &gic GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>, + <0x00007000 11 &gic GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>, + <0x00007000 12 &gic GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>, + /* PCIe Controller 0 */ <0x00012000 0 &gic GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>, <0x00012000 1 &gic GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>, @@ -239,6 +254,22 @@ status = "disabled"; }; }; + + gmac0: ethernet@24000 { + reg = <0x24000 0x800>; + }; + + gmac1: ethernet@25000 { + reg = <0x25000 0x800>; + }; + + gmac2: ethernet@26000 { + reg = <0x26000 0x800>; + }; + + gmac3: ethernet@27000 { + reg = <0x27000 0x800>; + }; }; lcpll0: lcpll0@1800c100 { @@ -260,6 +291,22 @@ "sata2"; }; + srab: srab@18007000 { + compatible = "brcm,bcm5301x-srab"; + reg = <0x18007000 0x1000>; + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + + /* ports are defined in board DTS */ + }; + + rng: rng@18004000 { + compatible = "brcm,bcm5301x-rng"; + reg = <0x18004000 0x14>; + }; + nand: nand@18028000 { compatible = "brcm,nand-iproc", "brcm,brcmnand-v6.1", "brcm,brcmnand"; reg = <0x18028000 0x600>, <0x1811a408 0x600>, <0x18028f00 0x20>; diff --git a/arch/arm/boot/dts/bcm953012er.dts b/arch/arm/boot/dts/bcm953012er.dts new file mode 100644 index 000000000..0a9abecf9 --- /dev/null +++ b/arch/arm/boot/dts/bcm953012er.dts @@ -0,0 +1,104 @@ +/* + * BSD LICENSE + * + * Copyright(c) 2016 Broadcom. All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * * Neither the name of Broadcom Corporation nor the names of its + * contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +/dts-v1/; + +#include "bcm4708.dtsi" +#include "bcm5301x-nand-cs0-bch8.dtsi" + +/ { + model = "NorthStar Enterprise Router (BCM953012ER)"; + compatible = "brcm,bcm953012er", "brcm,brcm53012", "brcm,bcm4708"; + + aliases { + serial0 = &uart0; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + memory { + reg = <0x00000000 0x8000000>; + }; + + gpio-keys { + compatible = "gpio-keys"; + #address-cells = <1>; + #size-cells = <0>; + + wps { + label = "WPS"; + linux,code = <KEY_WPS_BUTTON>; + gpios = <&chipcommon 6 GPIO_ACTIVE_LOW>; + }; + + restart { + label = "Reset"; + linux,code = <KEY_RESTART>; + gpios = <&chipcommon 15 GPIO_ACTIVE_LOW>; + }; + }; +}; + +&uart0 { + status = "okay"; +}; + +&spi_nor { + status = "okay"; +}; + +&srab { + status = "okay"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + label = "port0"; + }; + + port@1 { + reg = <1>; + label = "port1"; + }; + + port@5 { + reg = <5>; + label = "cpu"; + ethernet = <&gmac0>; + }; + }; +}; diff --git a/arch/arm/boot/dts/bcm958525xmc.dts b/arch/arm/boot/dts/bcm958525xmc.dts new file mode 100644 index 000000000..d257e83de --- /dev/null +++ b/arch/arm/boot/dts/bcm958525xmc.dts @@ -0,0 +1,109 @@ +/* + * BSD LICENSE + * + * Copyright(c) 2016 Broadcom. All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * * Neither the name of Broadcom Corporation nor the names of its + * contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +/dts-v1/; + +#include "bcm-nsp.dtsi" + +/ { + model = "NorthStar Plus XMC (BCM958525xmc)"; + compatible = "brcm,bcm58525", "brcm,nsp"; + + aliases { + serial0 = &uart0; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; +}; + +&nand { + nandcs@0 { + compatible = "brcm,nandcs"; + reg = <0>; + nand-on-flash-bbt; + + #address-cells = <1>; + #size-cells = <1>; + + nand-ecc-strength = <24>; + nand-ecc-step-size = <1024>; + + brcm,nand-oob-sector-size = <27>; + + partition@0 { + label = "nboot"; + reg = <0x00000000 0x00200000>; + read-only; + }; + partition@200000 { + label = "nenv"; + reg = <0x00200000 0x00400000>; + }; + partition@600000 { + label = "nsystem"; + reg = <0x00600000 0x00a00000>; + }; + partition@1000000 { + label = "nrootfs"; + reg = <0x01000000 0x03000000>; + }; + partition@4000000 { + label = "ncustfs"; + reg = <0x04000000 0x3c000000>; + }; + }; +}; + +/* XHCI, SATA, MMC, and Ethernet support needed to be complete */ + +&uart0 { + status = "okay"; +}; + +&pcie0 { + status = "okay"; +}; + +&pcie1 { + status = "okay"; +}; + +&pinctrl { + pinctrl-names = "default"; + pinctrl-0 = <&nand_sel>; + nand_sel: nand_sel { + function = "nand"; + groups = "nand_grp"; + }; +}; diff --git a/arch/arm/boot/dts/bcm958625hr.dts b/arch/arm/boot/dts/bcm958625hr.dts new file mode 100644 index 000000000..03b8bbeb6 --- /dev/null +++ b/arch/arm/boot/dts/bcm958625hr.dts @@ -0,0 +1,111 @@ +/* + * BSD LICENSE + * + * Copyright (c) 2016 Broadcom. All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * * Neither the name of Broadcom Corporation nor the names of its + * contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +/dts-v1/; + +#include "bcm-nsp.dtsi" + +/ { + model = "NorthStar Plus SVK (BCM958625HR)"; + compatible = "brcm,bcm58625", "brcm,nsp"; + + aliases { + serial0 = &uart0; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + memory { + reg = <0x60000000 0x20000000>; + }; +}; + +&nand { + nandcs@0 { + compatible = "brcm,nandcs"; + reg = <0>; + nand-on-flash-bbt; + + #address-cells = <1>; + #size-cells = <1>; + + nand-ecc-strength = <24>; + nand-ecc-step-size = <1024>; + + brcm,nand-oob-sector-size = <27>; + + partition@0 { + label = "nboot"; + reg = <0x00000000 0x00200000>; + read-only; + }; + partition@200000 { + label = "nenv"; + reg = <0x00200000 0x00400000>; + }; + partition@600000 { + label = "nsystem"; + reg = <0x00600000 0x00a00000>; + }; + partition@1000000 { + label = "nrootfs"; + reg = <0x01000000 0x03000000>; + }; + partition@4000000 { + label = "ncustfs"; + reg = <0x04000000 0x3c000000>; + }; + }; +}; + +&uart0 { + status = "okay"; +}; + +&pcie0 { + status = "okay"; +}; + +&pcie1 { + status = "okay"; +}; + +&pinctrl { + pinctrl-names = "default"; + pinctrl-0 = <&nand_sel>; + nand_sel: nand_sel { + function = "nand"; + groups = "nand_grp"; + }; +}; diff --git a/arch/arm/boot/dts/bcm958625k.dts b/arch/arm/boot/dts/bcm958625k.dts index e298450b4..2d8422632 100644 --- a/arch/arm/boot/dts/bcm958625k.dts +++ b/arch/arm/boot/dts/bcm958625k.dts @@ -68,6 +68,18 @@ status = "okay"; }; +&sata_phy0 { + status = "okay"; +}; + +&sata_phy1 { + status = "okay"; +}; + +&sata { + status = "okay"; +}; + &nand { nandcs@0 { compatible = "brcm,nandcs"; diff --git a/arch/arm/boot/dts/compulab-sb-som.dtsi b/arch/arm/boot/dts/compulab-sb-som.dtsi index 93d7e235b..4af1adfee 100644 --- a/arch/arm/boot/dts/compulab-sb-som.dtsi +++ b/arch/arm/boot/dts/compulab-sb-som.dtsi @@ -40,7 +40,7 @@ }; }; - hdmi_conn: connector@0 { + hdmi_conn: connector { compatible = "hdmi-connector"; label = "hdmi"; diff --git a/arch/arm/boot/dts/dm814x.dtsi b/arch/arm/boot/dts/dm814x.dtsi index d4537dc61..68e412c98 100644 --- a/arch/arm/boot/dts/dm814x.dtsi +++ b/arch/arm/boot/dts/dm814x.dtsi @@ -448,7 +448,7 @@ reg = <0x49000000 0x10000>; reg-names = "edma3_cc"; interrupts = <12 13 14>; - interrupt-names = "edma3_ccint", "emda3_mperr", + interrupt-names = "edma3_ccint", "edma3_mperr", "edma3_ccerrint"; dma-requests = <64>; #dma-cells = <2>; @@ -509,7 +509,6 @@ ale_entries = <1024>; bd_ram_size = <0x2000>; no_bd_ram = <0>; - rx_descs = <64>; mac_control = <0x20>; slaves = <2>; active_slave = <0>; diff --git a/arch/arm/boot/dts/dra7.dtsi b/arch/arm/boot/dts/dra7.dtsi index 3a8f3976f..d9bfb94a2 100644 --- a/arch/arm/boot/dts/dra7.dtsi +++ b/arch/arm/boot/dts/dra7.dtsi @@ -73,6 +73,49 @@ interrupt-parent = <&gic>; }; + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu0: cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a15"; + reg = <0>; + + operating-points-v2 = <&cpu0_opp_table>; + ti,syscon-efuse = <&scm_wkup 0x20c 0xf80000 19>; + ti,syscon-rev = <&scm_wkup 0x204>; + + clocks = <&dpll_mpu_ck>; + clock-names = "cpu"; + + clock-latency = <300000>; /* From omap-cpufreq driver */ + + /* cooling options */ + cooling-min-level = <0>; + cooling-max-level = <2>; + #cooling-cells = <2>; /* min followed by max */ + }; + }; + + cpu0_opp_table: opp_table0 { + compatible = "operating-points-v2"; + opp-shared; + + opp_nom@1000000000 { + opp-hz = /bits/ 64 <1000000000>; + opp-microvolt = <1060000 850000 1150000>; + opp-supported-hw = <0xFF 0x01>; + opp-suspend; + }; + + opp_od@1176000000 { + opp-hz = /bits/ 64 <1176000000>; + opp-microvolt = <1160000 885000 1160000>; + opp-supported-hw = <0xFF 0x02>; + }; + }; + /* * The soc node represents the soc top level view. It is used for IPs * that are not memory mapped in the MPU view or for the MPU itself. @@ -233,6 +276,11 @@ prm_clockdomains: clockdomains { }; }; + + scm_wkup: scm_conf@c000 { + compatible = "syscon"; + reg = <0xc000 0x1000>; + }; }; axi@0 { @@ -276,7 +324,7 @@ ranges = <0x51800000 0x51800000 0x3000 0x0 0x30000000 0x10000000>; status = "disabled"; - pcie@51000000 { + pcie@51800000 { compatible = "ti,dra7-pcie"; reg = <0x51800000 0x2000>, <0x51802000 0x14c>, <0x1000 0x2000>; reg-names = "rc_dbics", "ti_conf", "config"; @@ -304,6 +352,53 @@ }; }; + ocmcram1: ocmcram@40300000 { + compatible = "mmio-sram"; + reg = <0x40300000 0x80000>; + ranges = <0x0 0x40300000 0x80000>; + #address-cells = <1>; + #size-cells = <1>; + /* + * This is a placeholder for an optional reserved + * region for use by secure software. The size + * of this region is not known until runtime so it + * is set as zero to either be updated to reserve + * space or left unchanged to leave all SRAM for use. + * On HS parts that that require the reserved region + * either the bootloader can update the size to + * the required amount or the node can be overridden + * from the board dts file for the secure platform. + */ + sram-hs@0 { + compatible = "ti,secure-ram"; + reg = <0x0 0x0>; + }; + }; + + /* + * NOTE: ocmcram2 and ocmcram3 are not available on all + * DRA7xx and AM57xx variants. Confirm availability in + * the data manual for the exact part number in use + * before enabling these nodes in the board dts file. + */ + ocmcram2: ocmcram@40400000 { + status = "disabled"; + compatible = "mmio-sram"; + reg = <0x40400000 0x100000>; + ranges = <0x0 0x40400000 0x100000>; + #address-cells = <1>; + #size-cells = <1>; + }; + + ocmcram3: ocmcram@40500000 { + status = "disabled"; + compatible = "mmio-sram"; + reg = <0x40500000 0x100000>; + ranges = <0x0 0x40500000 0x100000>; + #address-cells = <1>; + #size-cells = <1>; + }; + bandgap: bandgap@4a0021e0 { reg = <0x4a0021e0 0xc 0x4a00232c 0xc @@ -341,7 +436,7 @@ interrupts = <GIC_SPI 361 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 360 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 359 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "edma3_ccint", "emda3_mperr", + interrupt-names = "edma3_ccint", "edma3_mperr", "edma3_ccerrint"; dma-requests = <64>; #dma-cells = <2>; @@ -1628,7 +1723,6 @@ ale_entries = <1024>; bd_ram_size = <0x2000>; no_bd_ram = <0>; - rx_descs = <64>; mac_control = <0x20>; slaves = <2>; active_slave = <0>; @@ -1663,7 +1757,7 @@ status = "disabled"; davinci_mdio: mdio@48485000 { - compatible = "ti,davinci_mdio"; + compatible = "ti,cpsw-mdio","ti,davinci_mdio"; #address-cells = <1>; #size-cells = <0>; ti,hwmods = "davinci_mdio"; @@ -1745,6 +1839,149 @@ clock-names = "fck", "sys_clk"; }; }; + + epwmss0: epwmss@4843e000 { + compatible = "ti,dra746-pwmss", "ti,am33xx-pwmss"; + reg = <0x4843e000 0x30>; + ti,hwmods = "epwmss0"; + #address-cells = <1>; + #size-cells = <1>; + status = "disabled"; + ranges; + + ehrpwm0: pwm@4843e200 { + compatible = "ti,dra746-ehrpwm", + "ti,am3352-ehrpwm"; + #pwm-cells = <3>; + reg = <0x4843e200 0x80>; + clocks = <&ehrpwm0_tbclk>, <&l4_root_clk_div>; + clock-names = "tbclk", "fck"; + status = "disabled"; + }; + + ecap0: ecap@4843e100 { + compatible = "ti,dra746-ecap", + "ti,am3352-ecap"; + #pwm-cells = <3>; + reg = <0x4843e100 0x80>; + clocks = <&l4_root_clk_div>; + clock-names = "fck"; + status = "disabled"; + }; + }; + + epwmss1: epwmss@48440000 { + compatible = "ti,dra746-pwmss", "ti,am33xx-pwmss"; + reg = <0x48440000 0x30>; + ti,hwmods = "epwmss1"; + #address-cells = <1>; + #size-cells = <1>; + status = "disabled"; + ranges; + + ehrpwm1: pwm@48440200 { + compatible = "ti,dra746-ehrpwm", + "ti,am3352-ehrpwm"; + #pwm-cells = <3>; + reg = <0x48440200 0x80>; + clocks = <&ehrpwm1_tbclk>, <&l4_root_clk_div>; + clock-names = "tbclk", "fck"; + status = "disabled"; + }; + + ecap1: ecap@48440100 { + compatible = "ti,dra746-ecap", + "ti,am3352-ecap"; + #pwm-cells = <3>; + reg = <0x48440100 0x80>; + clocks = <&l4_root_clk_div>; + clock-names = "fck"; + status = "disabled"; + }; + }; + + epwmss2: epwmss@48442000 { + compatible = "ti,dra746-pwmss", "ti,am33xx-pwmss"; + reg = <0x48442000 0x30>; + ti,hwmods = "epwmss2"; + #address-cells = <1>; + #size-cells = <1>; + status = "disabled"; + ranges; + + ehrpwm2: pwm@48442200 { + compatible = "ti,dra746-ehrpwm", + "ti,am3352-ehrpwm"; + #pwm-cells = <3>; + reg = <0x48442200 0x80>; + clocks = <&ehrpwm2_tbclk>, <&l4_root_clk_div>; + clock-names = "tbclk", "fck"; + status = "disabled"; + }; + + ecap2: ecap@48442100 { + compatible = "ti,dra746-ecap", + "ti,am3352-ecap"; + #pwm-cells = <3>; + reg = <0x48442100 0x80>; + clocks = <&l4_root_clk_div>; + clock-names = "fck"; + status = "disabled"; + }; + }; + + aes1: aes@4b500000 { + compatible = "ti,omap4-aes"; + ti,hwmods = "aes1"; + reg = <0x4b500000 0xa0>; + interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&edma_xbar 111 0>, <&edma_xbar 110 0>; + dma-names = "tx", "rx"; + clocks = <&l3_iclk_div>; + clock-names = "fck"; + }; + + aes2: aes@4b700000 { + compatible = "ti,omap4-aes"; + ti,hwmods = "aes2"; + reg = <0x4b700000 0xa0>; + interrupts = <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&edma_xbar 114 0>, <&edma_xbar 113 0>; + dma-names = "tx", "rx"; + clocks = <&l3_iclk_div>; + clock-names = "fck"; + }; + + des: des@480a5000 { + compatible = "ti,omap4-des"; + ti,hwmods = "des"; + reg = <0x480a5000 0xa0>; + interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&sdma_xbar 117>, <&sdma_xbar 116>; + dma-names = "tx", "rx"; + clocks = <&l3_iclk_div>; + clock-names = "fck"; + }; + + sham: sham@53100000 { + compatible = "ti,omap5-sham"; + ti,hwmods = "sham"; + reg = <0x4b101000 0x300>; + interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&edma_xbar 119 0>; + dma-names = "rx"; + clocks = <&l3_iclk_div>; + clock-names = "fck"; + }; + + rng: rng@48090000 { + compatible = "ti,omap4-rng"; + ti,hwmods = "rng"; + reg = <0x48090000 0x2000>; + interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&l3_iclk_div>; + clock-names = "fck"; + }; }; thermal_zones: thermal-zones { diff --git a/arch/arm/boot/dts/dra72-evm-common.dtsi b/arch/arm/boot/dts/dra72-evm-common.dtsi index 093538ea5..9d3cf50ca 100644 --- a/arch/arm/boot/dts/dra72-evm-common.dtsi +++ b/arch/arm/boot/dts/dra72-evm-common.dtsi @@ -18,7 +18,7 @@ display0 = &hdmi0; }; - evm_3v3: fixedregulator-evm_3v3 { + evm_3v3_sw: fixedregulator-evm_3v3 { compatible = "regulator-fixed"; regulator-name = "evm_3v3"; regulator-min-microvolt = <3300000>; @@ -29,7 +29,7 @@ /* TPS77018DBVT */ compatible = "regulator-fixed"; regulator-name = "aic_dvdd"; - vin-supply = <&evm_3v3>; + vin-supply = <&evm_3v3_sw>; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; }; @@ -414,9 +414,9 @@ status = "okay"; /* Regulators */ - AVDD-supply = <&evm_3v3>; - IOVDD-supply = <&evm_3v3>; - DRVDD-supply = <&evm_3v3>; + AVDD-supply = <&evm_3v3_sw>; + IOVDD-supply = <&evm_3v3_sw>; + DRVDD-supply = <&evm_3v3_sw>; DVDD-supply = <&aic_dvdd>; }; }; @@ -597,7 +597,7 @@ pinctrl-names = "default"; pinctrl-0 = <&mmc2_pins_default>; - vmmc-supply = <&evm_3v3>; + vmmc-supply = <&evm_3v3_sw>; bus-width = <8>; ti,non-removable; max-frequency = <192000000>; diff --git a/arch/arm/boot/dts/dra72x.dtsi b/arch/arm/boot/dts/dra72x.dtsi index 70a217050..67107605f 100644 --- a/arch/arm/boot/dts/dra72x.dtsi +++ b/arch/arm/boot/dts/dra72x.dtsi @@ -12,22 +12,6 @@ / { compatible = "ti,dra722", "ti,dra72", "ti,dra7"; - cpus { - #address-cells = <1>; - #size-cells = <0>; - - cpu0: cpu@0 { - device_type = "cpu"; - compatible = "arm,cortex-a15"; - reg = <0>; - - /* cooling options */ - cooling-min-level = <0>; - cooling-max-level = <2>; - #cooling-cells = <2>; /* min followed by max */ - }; - }; - pmu { compatible = "arm,cortex-a15-pmu"; interrupt-parent = <&wakeupgen>; diff --git a/arch/arm/boot/dts/dra74x.dtsi b/arch/arm/boot/dts/dra74x.dtsi index 5e06020f4..8987b3e18 100644 --- a/arch/arm/boot/dts/dra74x.dtsi +++ b/arch/arm/boot/dts/dra74x.dtsi @@ -13,34 +13,11 @@ compatible = "ti,dra742", "ti,dra74", "ti,dra7"; cpus { - #address-cells = <1>; - #size-cells = <0>; - - cpu0: cpu@0 { - device_type = "cpu"; - compatible = "arm,cortex-a15"; - reg = <0>; - - operating-points = < - /* kHz uV */ - 1000000 1060000 - 1176000 1160000 - >; - - clocks = <&dpll_mpu_ck>; - clock-names = "cpu"; - - clock-latency = <300000>; /* From omap-cpufreq driver */ - - /* cooling options */ - cooling-min-level = <0>; - cooling-max-level = <2>; - #cooling-cells = <2>; /* min followed by max */ - }; cpu@1 { device_type = "cpu"; compatible = "arm,cortex-a15"; reg = <1>; + operating-points-v2 = <&cpu0_opp_table>; }; }; diff --git a/arch/arm/boot/dts/emev2-kzm9d.dts b/arch/arm/boot/dts/emev2-kzm9d.dts index a35b851e1..60d0a7328 100644 --- a/arch/arm/boot/dts/emev2-kzm9d.dts +++ b/arch/arm/boot/dts/emev2-kzm9d.dts @@ -18,14 +18,18 @@ model = "EMEV2 KZM9D Board"; compatible = "renesas,kzm9d", "renesas,emev2"; - memory { + memory@40000000 { device_type = "memory"; reg = <0x40000000 0x8000000>; }; + aliases { + serial1 = &uart1; + }; + chosen { - bootargs = "console=ttyS1,115200n81 ignore_loglevel root=/dev/nfs ip=dhcp"; - stdout-path = &uart1; + bootargs = "ignore_loglevel root=/dev/nfs ip=dhcp"; + stdout-path = "serial1:115200n8"; }; gpio_keys { @@ -33,28 +37,28 @@ #address-cells = <1>; #size-cells = <0>; - button@1 { + one { debounce_interval = <50>; wakeup-source; label = "DSW2-1"; linux,code = <KEY_1>; gpios = <&gpio0 14 GPIO_ACTIVE_HIGH>; }; - button@2 { + two { debounce_interval = <50>; wakeup-source; label = "DSW2-2"; linux,code = <KEY_2>; gpios = <&gpio0 15 GPIO_ACTIVE_HIGH>; }; - button@3 { + three { debounce_interval = <50>; wakeup-source; label = "DSW2-3"; linux,code = <KEY_3>; gpios = <&gpio0 16 GPIO_ACTIVE_HIGH>; }; - button@4 { + four { debounce_interval = <50>; wakeup-source; label = "DSW2-4"; @@ -63,7 +67,7 @@ }; }; - reg_1p8v: regulator@0 { + reg_1p8v: regulator-1p8v { compatible = "regulator-fixed"; regulator-name = "fixed-1.8V"; regulator-min-microvolt = <1800000>; @@ -72,7 +76,7 @@ regulator-boot-on; }; - reg_3p3v: regulator@1 { + reg_3p3v: regulator-3p3v { compatible = "regulator-fixed"; regulator-name = "fixed-3.3V"; regulator-min-microvolt = <3300000>; @@ -104,7 +108,7 @@ }; &pfc { - uart1_pins: serial@e1030000 { + uart1_pins: uart1 { groups = "uart1_ctrl", "uart1_data"; function = "uart1"; }; diff --git a/arch/arm/boot/dts/emev2.dtsi b/arch/arm/boot/dts/emev2.dtsi index bcce6f50c..cd119400f 100644 --- a/arch/arm/boot/dts/emev2.dtsi +++ b/arch/arm/boot/dts/emev2.dtsi @@ -69,25 +69,25 @@ clock-frequency = <32768>; #clock-cells = <0>; }; - iic0_sclkdiv: iic0_sclkdiv { + iic0_sclkdiv: iic0_sclkdiv@624,0 { compatible = "renesas,emev2-smu-clkdiv"; reg = <0x624 0>; clocks = <&pll3_fo>; #clock-cells = <0>; }; - iic0_sclk: iic0_sclk { + iic0_sclk: iic0_sclk@48c,1 { compatible = "renesas,emev2-smu-gclk"; reg = <0x48c 1>; clocks = <&iic0_sclkdiv>; #clock-cells = <0>; }; - iic1_sclkdiv: iic1_sclkdiv { + iic1_sclkdiv: iic1_sclkdiv@624,16 { compatible = "renesas,emev2-smu-clkdiv"; reg = <0x624 16>; clocks = <&pll3_fo>; #clock-cells = <0>; }; - iic1_sclk: iic1_sclk { + iic1_sclk: iic1_sclk@490,1 { compatible = "renesas,emev2-smu-gclk"; reg = <0x490 1>; clocks = <&iic1_sclkdiv>; @@ -100,55 +100,55 @@ clock-mult = <7000>; #clock-cells = <0>; }; - usia_u0_sclkdiv: usia_u0_sclkdiv { + usia_u0_sclkdiv: usia_u0_sclkdiv@610,0 { compatible = "renesas,emev2-smu-clkdiv"; reg = <0x610 0>; clocks = <&pll3_fo>; #clock-cells = <0>; }; - usib_u1_sclkdiv: usib_u1_sclkdiv { + usib_u1_sclkdiv: usib_u1_sclkdiv@65c,0 { compatible = "renesas,emev2-smu-clkdiv"; reg = <0x65c 0>; clocks = <&pll3_fo>; #clock-cells = <0>; }; - usib_u2_sclkdiv: usib_u2_sclkdiv { + usib_u2_sclkdiv: usib_u2_sclkdiv@65c,16 { compatible = "renesas,emev2-smu-clkdiv"; reg = <0x65c 16>; clocks = <&pll3_fo>; #clock-cells = <0>; }; - usib_u3_sclkdiv: usib_u3_sclkdiv { + usib_u3_sclkdiv: usib_u3_sclkdiv@660,0 { compatible = "renesas,emev2-smu-clkdiv"; reg = <0x660 0>; clocks = <&pll3_fo>; #clock-cells = <0>; }; - usia_u0_sclk: usia_u0_sclk { + usia_u0_sclk: usia_u0_sclk@4a0,1 { compatible = "renesas,emev2-smu-gclk"; reg = <0x4a0 1>; clocks = <&usia_u0_sclkdiv>; #clock-cells = <0>; }; - usib_u1_sclk: usib_u1_sclk { + usib_u1_sclk: usib_u1_sclk@4b8,1 { compatible = "renesas,emev2-smu-gclk"; reg = <0x4b8 1>; clocks = <&usib_u1_sclkdiv>; #clock-cells = <0>; }; - usib_u2_sclk: usib_u2_sclk { + usib_u2_sclk: usib_u2_sclk@4bc,1 { compatible = "renesas,emev2-smu-gclk"; reg = <0x4bc 1>; clocks = <&usib_u2_sclkdiv>; #clock-cells = <0>; }; - usib_u3_sclk: usib_u3_sclk { + usib_u3_sclk: usib_u3_sclk@4c0,1 { compatible = "renesas,emev2-smu-gclk"; reg = <0x4c0 1>; clocks = <&usib_u3_sclkdiv>; #clock-cells = <0>; }; - sti_sclk: sti_sclk { + sti_sclk: sti_sclk@528,1 { compatible = "renesas,emev2-smu-gclk"; reg = <0x528 1>; clocks = <&c32ki>; diff --git a/arch/arm/boot/dts/ep7209.dtsi b/arch/arm/boot/dts/ep7209.dtsi new file mode 100644 index 000000000..aaf1261d2 --- /dev/null +++ b/arch/arm/boot/dts/ep7209.dtsi @@ -0,0 +1,191 @@ +/* + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + */ + +/dts-v1/; + +#include "skeleton.dtsi" + +#include <dt-bindings/clock/clps711x-clock.h> + +/ { + model = "Cirrus Logic EP7209"; + compatible = "cirrus,ep7209"; + + aliases { + gpio0 = &porta; + gpio1 = &portb; + gpio3 = &portd; + gpio4 = &porte; + serial0 = &uart1; + serial1 = &uart2; + spi0 = &spi; + timer0 = &timer1; + timer1 = &timer2; + }; + + cpus { + #address-cells = <0>; + #size-cells = <0>; + + cpu { + device_type = "cpu"; + compatible = "arm,arm720t"; + }; + }; + + soc { + #address-cells = <1>; + #size-cells = <1>; + compatible = "simple-bus"; + interrupt-parent = <&intc>; + ranges; + + clks: clks@80000000 { + #clock-cells = <1>; + compatible = "cirrus,ep7209-clk"; + reg = <0x80000000 0xc000>; + startup-frequency = <73728000>; + }; + + intc: intc@80000000 { + compatible = "cirrus,ep7209-intc"; + reg = <0x80000000 0x4000>; + interrupt-controller; + #interrupt-cells = <1>; + }; + + porta: gpio@80000000 { + compatible = "cirrus,ep7209-gpio"; + reg = <0x80000000 0x1 0x80000040 0x1>; + gpio-controller; + #gpio-cells = <2>; + }; + + portb: gpio@80000001 { + compatible = "cirrus,ep7209-gpio"; + reg = <0x80000001 0x1 0x80000041 0x1>; + gpio-controller; + #gpio-cells = <2>; + }; + + portd: gpio@80000003 { + compatible = "cirrus,ep7209-gpio"; + reg = <0x80000003 0x1 0x80000043 0x1>; + gpio-controller; + #gpio-cells = <2>; + }; + + porte: gpio@80000083 { + compatible = "cirrus,ep7209-gpio"; + reg = <0x80000083 0x1 0x800000c3 0x1>; + gpio-controller; + #gpio-cells = <2>; + }; + + syscon1: syscon@80000100 { + compatible = "cirrus,ep7209-syscon1", "syscon"; + reg = <0x80000100 0x80>; + }; + + bus: bus@80000180 { + #address-cells = <2>; + #size-cells = <1>; + compatible = "cirrus,ep7209-bus", "simple-bus"; + clocks = <&clks CLPS711X_CLK_BUS>; + reg = <0x80000180 0x80>; + ranges = < + 0 0 0x00000000 0x10000000 + 1 0 0x10000000 0x10000000 + 2 0 0x20000000 0x10000000 + 3 0 0x30000000 0x10000000 + 4 0 0x40000000 0x10000000 + 5 0 0x50000000 0x10000000 + 6 0 0x60000000 0x0000c000 + 7 0 0x70000000 0x00000080 + >; + }; + + fb: fb@800002c0 { + compatible = "cirrus,ep7209-fb"; + reg = <0x800002c0 0xd44>, <0x60000000 0xc000>; + clocks = <&clks CLPS711X_CLK_BUS>; + status = "disabled"; + }; + + timer1: timer@80000300 { + compatible = "cirrus,ep7209-timer"; + reg = <0x80000300 0x4>; + clocks = <&clks CLPS711X_CLK_TIMER1>; + interrupts = <8>; + }; + + timer2: timer@80000340 { + compatible = "cirrus,ep7209-timer"; + reg = <0x80000340 0x4>; + clocks = <&clks CLPS711X_CLK_TIMER2>; + interrupts = <9>; + }; + + pwm: pwm@80000400 { + compatible = "cirrus,ep7209-pwm"; + reg = <0x80000400 0x4>; + clocks = <&clks CLPS711X_CLK_PWM>; + #pwm-cells = <1>; + }; + + uart1: uart@80000480 { + compatible = "cirrus,ep7209-uart"; + reg = <0x80000480 0x80>; + interrupts = <12 13>; + clocks = <&clks CLPS711X_CLK_UART>; + syscon = <&syscon1>; + }; + + spi: spi@80000500 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "cirrus,ep7209-spi"; + reg = <0x80000500 0x4>; + interrupts = <15>; + clocks = <&clks CLPS711X_CLK_SPI>; + status = "disabled"; + }; + + syscon2: syscon@80001100 { + compatible = "cirrus,ep7209-syscon2", "syscon"; + reg = <0x80001100 0x80>; + }; + + uart2: uart@80001480 { + compatible = "cirrus,ep7209-uart"; + reg = <0x80001480 0x80>; + interrupts = <28 29>; + clocks = <&clks CLPS711X_CLK_UART>; + syscon = <&syscon2>; + }; + + dai: dai@80002000 { + #sound-dai-cells = <0>; + compatible = "cirrus,ep7209-dai"; + reg = <0x80002000 0x604>; + clocks = <&clks CLPS711X_CLK_PLL>; + clock-names = "pll"; + interrupts = <32>; + status = "disabled"; + }; + + syscon3: syscon@80002200 { + compatible = "cirrus,ep7209-syscon3", "syscon"; + reg = <0x80002200 0x40>; + }; + }; + + mctrl: mctrl { + compatible = "cirrus,ep7209-mctrl-gpio"; + gpio-controller; + #gpio-cells = <2>; + }; +}; diff --git a/arch/arm/boot/dts/ep7211-edb7211.dts b/arch/arm/boot/dts/ep7211-edb7211.dts new file mode 100644 index 000000000..9a134ed27 --- /dev/null +++ b/arch/arm/boot/dts/ep7211-edb7211.dts @@ -0,0 +1,100 @@ +/* + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + */ + +#include "ep7211.dtsi" +#include <dt-bindings/gpio/gpio.h> + +/ { + model = "Cirrus Logic EP7211 Development Board"; + compatible = "cirrus,edb7211", "cirrus,ep7211", "cirrus,ep7209"; + + memory { + reg = <0xc0000000 0x02000000>; + }; + + backlight: backlight { + compatible = "pwm-backlight"; + pwms = <&pwm 0>; + brightness-levels = < + 0x0 0x1 0x2 0x3 0x4 0x5 0x6 0x7 + 0x8 0x9 0xa 0xb 0xc 0xd 0xe 0xf + >; + default-brightness-level = <0x0>; + power-supply = <&blen>; + }; + + display: display { + model = "320x240x4"; + native-mode = <&timing0>; + bits-per-pixel = <4>; + ac-prescale = <17>; + + display-timings { + timing0: 320x240 { + hactive = <320>; + hback-porch = <0>; + hfront-porch = <0>; + hsync-len = <0>; + vactive = <240>; + vback-porch = <0>; + vfront-porch = <0>; + vsync-len = <0>; + clock-frequency = <6500000>; + }; + }; + }; + + i2c: i2c { + compatible = "i2c-gpio"; + gpios = <&portd 4 GPIO_ACTIVE_HIGH>, + <&portd 5 GPIO_ACTIVE_HIGH>; + i2c-gpio,delay-us = <2>; + i2c-gpio,scl-output-only; + #address-cells = <1>; + #size-cells = <0>; + }; + + lcddc: lcddc { + compatible = "regulator-fixed"; + regulator-name = "BACKLIGHT ENABLE"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&portd 1 GPIO_ACTIVE_HIGH>; + }; + + blen: blen { + compatible = "regulator-fixed"; + regulator-name = "BACKLIGHT ENABLE"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&portd 3 GPIO_ACTIVE_HIGH>; + }; +}; + +&bus { + flash: nor@00000000 { + compatible = "cfi-flash"; + reg = <0 0x00000000 0x02000000>; + bank-width = <2>; + #address-cells = <1>; + #size-cells = <1>; + }; +}; + +&fb { + display = <&display>; + lcd-supply = <&lcddc>; + status = "okay"; +}; + +&portd { + lcden { + gpio-hog; + gpios = <2 GPIO_ACTIVE_HIGH>; + output-high; + line-name = "LCD ENABLE"; + }; +}; diff --git a/arch/arm/boot/dts/ep7211.dtsi b/arch/arm/boot/dts/ep7211.dtsi new file mode 100644 index 000000000..e438f6db0 --- /dev/null +++ b/arch/arm/boot/dts/ep7211.dtsi @@ -0,0 +1,12 @@ +/* + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + */ + +#include "ep7209.dtsi" + +/ { + model = "Cirrus Logic EP7211"; + compatible = "cirrus,ep7211", "cirrus,ep7209"; +}; diff --git a/arch/arm/boot/dts/ethernut5.dts b/arch/arm/boot/dts/ethernut5.dts index 243044343..4687229a3 100644 --- a/arch/arm/boot/dts/ethernut5.dts +++ b/arch/arm/boot/dts/ethernut5.dts @@ -77,13 +77,13 @@ }; }; - usb0: ohci@00500000 { + usb0: ohci@500000 { num-ports = <2>; status = "okay"; }; }; - i2c@0 { + i2c-gpio-0 { status = "okay"; pcf8563@50 { diff --git a/arch/arm/boot/dts/evk-pro3.dts b/arch/arm/boot/dts/evk-pro3.dts index f72969efe..20a4481b6 100644 --- a/arch/arm/boot/dts/evk-pro3.dts +++ b/arch/arm/boot/dts/evk-pro3.dts @@ -46,13 +46,13 @@ }; }; - usb0: ohci@00500000 { + usb0: ohci@500000 { num-ports = <2>; status = "okay"; }; }; - i2c@0 { + i2c-gpio-0 { status = "okay"; }; diff --git a/arch/arm/boot/dts/exynos-mfc-reserved-memory.dtsi b/arch/arm/boot/dts/exynos-mfc-reserved-memory.dtsi new file mode 100644 index 000000000..f78c14c82 --- /dev/null +++ b/arch/arm/boot/dts/exynos-mfc-reserved-memory.dtsi @@ -0,0 +1,35 @@ +/* + * Samsung's Exynos SoC MFC (Video Codec) reserved memory common definition. + * + * Copyright (c) 2016 Samsung Electronics Co., Ltd + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +/ { + reserved-memory { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + mfc_left: region_mfc_left { + compatible = "shared-dma-pool"; + no-map; + size = <0x1000000>; + alignment = <0x100000>; + }; + + mfc_right: region_mfc_right { + compatible = "shared-dma-pool"; + no-map; + size = <0x800000>; + alignment = <0x100000>; + }; + }; +}; + +&mfc { + memory-region = <&mfc_left>, <&mfc_right>; +}; diff --git a/arch/arm/boot/dts/exynos3250-rinato.dts b/arch/arm/boot/dts/exynos3250-rinato.dts index e42281959..a92181368 100644 --- a/arch/arm/boot/dts/exynos3250-rinato.dts +++ b/arch/arm/boot/dts/exynos3250-rinato.dts @@ -632,10 +632,6 @@ status = "okay"; }; -&mfc { - status = "okay"; -}; - &jpeg { status = "okay"; }; diff --git a/arch/arm/boot/dts/exynos3250.dtsi b/arch/arm/boot/dts/exynos3250.dtsi index 62f3dcd9e..70e3aceab 100644 --- a/arch/arm/boot/dts/exynos3250.dtsi +++ b/arch/arm/boot/dts/exynos3250.dtsi @@ -431,7 +431,6 @@ clocks = <&cmu CLK_MFC>, <&cmu CLK_SCLK_MFC>; power-domains = <&pd_mfc>; iommus = <&sysmmu_mfc>; - status = "disabled"; }; sysmmu_mfc: sysmmu@13620000 { diff --git a/arch/arm/boot/dts/exynos4.dtsi b/arch/arm/boot/dts/exynos4.dtsi index ca8f3e3cf..32f22e12c 100644 --- a/arch/arm/boot/dts/exynos4.dtsi +++ b/arch/arm/boot/dts/exynos4.dtsi @@ -428,7 +428,6 @@ clock-names = "mfc", "sclk_mfc"; iommus = <&sysmmu_mfc_l>, <&sysmmu_mfc_r>; iommu-names = "left", "right"; - status = "disabled"; }; serial_0: serial@13800000 { diff --git a/arch/arm/boot/dts/exynos4210-origen.dts b/arch/arm/boot/dts/exynos4210-origen.dts index ad7394c1d..be2751eeb 100644 --- a/arch/arm/boot/dts/exynos4210-origen.dts +++ b/arch/arm/boot/dts/exynos4210-origen.dts @@ -18,6 +18,7 @@ #include "exynos4210.dtsi" #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/input/input.h> +#include "exynos-mfc-reserved-memory.dtsi" / { model = "Insignal Origen evaluation board based on Exynos4210"; @@ -287,12 +288,6 @@ }; }; -&mfc { - samsung,mfc-r = <0x43000000 0x800000>; - samsung,mfc-l = <0x51000000 0x800000>; - status = "okay"; -}; - &sdhci_0 { bus-width = <4>; pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus4 &sd0_cd>; diff --git a/arch/arm/boot/dts/exynos4210-smdkv310.dts b/arch/arm/boot/dts/exynos4210-smdkv310.dts index 94ca7d36a..847fae3dd 100644 --- a/arch/arm/boot/dts/exynos4210-smdkv310.dts +++ b/arch/arm/boot/dts/exynos4210-smdkv310.dts @@ -17,6 +17,7 @@ /dts-v1/; #include "exynos4210.dtsi" #include <dt-bindings/gpio/gpio.h> +#include "exynos-mfc-reserved-memory.dtsi" / { model = "Samsung smdkv310 evaluation board based on Exynos4210"; @@ -132,12 +133,6 @@ }; }; -&mfc { - samsung,mfc-r = <0x43000000 0x800000>; - samsung,mfc-l = <0x51000000 0x800000>; - status = "okay"; -}; - &pinctrl_1 { keypad_rows: keypad-rows { samsung,pins = "gpx2-0", "gpx2-1"; diff --git a/arch/arm/boot/dts/exynos4412-odroid-common.dtsi b/arch/arm/boot/dts/exynos4412-odroid-common.dtsi index ec7619a38..58ad48e7b 100644 --- a/arch/arm/boot/dts/exynos4412-odroid-common.dtsi +++ b/arch/arm/boot/dts/exynos4412-odroid-common.dtsi @@ -13,6 +13,7 @@ #include "exynos4412.dtsi" #include "exynos4412-ppmu-common.dtsi" #include <dt-bindings/gpio/gpio.h> +#include "exynos-mfc-reserved-memory.dtsi" / { chosen { @@ -297,7 +298,6 @@ regulator-name = "VDDQ_MMC2_2.8V"; regulator-min-microvolt = <2800000>; regulator-max-microvolt = <2800000>; - regulator-always-on; regulator-boot-on; }; @@ -390,10 +390,18 @@ }; ldo21_reg: LDO21 { - regulator-name = "LDO21_3.3V"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; + regulator-name = "TFLASH_2.8V"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-boot-on; + }; + + ldo22_reg: LDO22 { + /* + * Only U3 uses it, so let it define the + * constraints + */ + regulator-name = "LDO22"; regulator-boot-on; }; @@ -460,9 +468,11 @@ }; buck8_reg: BUCK8 { + /* + * Constraints set by specific board: X, + * X2 and U3. + */ regulator-name = "BUCK8_2.8V"; - regulator-min-microvolt = <2800000>; - regulator-max-microvolt = <2800000>; }; }; }; @@ -506,7 +516,7 @@ &mshc_0 { pinctrl-0 = <&sd4_clk &sd4_cmd &sd4_bus4 &sd4_bus8>; pinctrl-names = "default"; - vmmc-supply = <&ldo20_reg &buck8_reg>; + vmmc-supply = <&ldo20_reg>; mmc-pwrseq = <&emmc_pwrseq>; status = "okay"; @@ -530,7 +540,8 @@ bus-width = <4>; pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus4>; pinctrl-names = "default"; - vmmc-supply = <&ldo4_reg &ldo21_reg>; + vmmc-supply = <&ldo21_reg>; + vqmmc-supply = <&ldo4_reg>; cd-gpios = <&gpk2 2 GPIO_ACTIVE_HIGH>; cd-inverted; status = "okay"; diff --git a/arch/arm/boot/dts/exynos4412-odroidu3.dts b/arch/arm/boot/dts/exynos4412-odroidu3.dts index dd89f7b37..d73aa6c58 100644 --- a/arch/arm/boot/dts/exynos4412-odroidu3.dts +++ b/arch/arm/boot/dts/exynos4412-odroidu3.dts @@ -69,6 +69,24 @@ }; }; +/* Supply for LAN9730/SMSC95xx */ +&buck8_reg { + regulator-name = "BUCK8_P3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; +}; + +/* VDDQ for MSHC (eMMC card) */ +&ldo22_reg { + regulator-name = "LDO22_VDDQ_MMC4_2.8V"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; +}; + +&mshc_0 { + vqmmc-supply = <&ldo22_reg>; +}; + &pwm { pinctrl-0 = <&pwm0_out>; pinctrl-names = "default"; diff --git a/arch/arm/boot/dts/exynos4412-odroidx.dts b/arch/arm/boot/dts/exynos4412-odroidx.dts index bf7b21b81..2af235151 100644 --- a/arch/arm/boot/dts/exynos4412-odroidx.dts +++ b/arch/arm/boot/dts/exynos4412-odroidx.dts @@ -63,12 +63,23 @@ }; }; +/* VDDQ for MSHC (eMMC card) */ +&buck8_reg { + regulator-name = "BUCK8_VDDQ_MMC4_2.8V"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; +}; + &ehci { port@1 { status = "okay"; }; }; +&mshc_0 { + vqmmc-supply = <&buck8_reg>; +}; + &pinctrl_1 { gpio_home_key: home_key { samsung,pins = "gpx2-2"; diff --git a/arch/arm/boot/dts/exynos4412-odroidx2.dts b/arch/arm/boot/dts/exynos4412-odroidx2.dts index 6e3367856..3e3584270 100644 --- a/arch/arm/boot/dts/exynos4412-odroidx2.dts +++ b/arch/arm/boot/dts/exynos4412-odroidx2.dts @@ -22,6 +22,17 @@ }; }; +/* VDDQ for MSHC (eMMC card) */ +&buck8_reg { + regulator-name = "BUCK8_VDDQ_MMC4_2.8V"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; +}; + +&mshc_0 { + vqmmc-supply = <&buck8_reg>; +}; + &sound { simple-audio-card,name = "Odroid-X2"; simple-audio-card,widgets = diff --git a/arch/arm/boot/dts/exynos4412-origen.dts b/arch/arm/boot/dts/exynos4412-origen.dts index 8bca699b7..26a36fed9 100644 --- a/arch/arm/boot/dts/exynos4412-origen.dts +++ b/arch/arm/boot/dts/exynos4412-origen.dts @@ -16,6 +16,7 @@ #include "exynos4412.dtsi" #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/input/input.h> +#include "exynos-mfc-reserved-memory.dtsi" / { model = "Insignal Origen evaluation board based on Exynos4412"; @@ -83,6 +84,22 @@ cpu0-supply = <&buck2_reg>; }; +&exynos_usbphy { + status = "okay"; +}; + +&ehci { + samsung,vbus-gpio = <&gpx3 5 1>; + status = "okay"; + + port@1{ + status = "okay"; + }; + port@2 { + status = "okay"; + }; +}; + &fimd { pinctrl-0 = <&lcd_clk &lcd_data24 &pwm1_out>; pinctrl-names = "default"; @@ -465,12 +482,6 @@ }; }; -&mfc { - samsung,mfc-r = <0x43000000 0x800000>; - samsung,mfc-l = <0x51000000 0x800000>; - status = "okay"; -}; - &mshc_0 { pinctrl-0 = <&sd4_clk &sd4_cmd &sd4_bus4 &sd4_bus8>; pinctrl-names = "default"; diff --git a/arch/arm/boot/dts/exynos4412-smdk4412.dts b/arch/arm/boot/dts/exynos4412-smdk4412.dts index a51069f3c..231ffbdbf 100644 --- a/arch/arm/boot/dts/exynos4412-smdk4412.dts +++ b/arch/arm/boot/dts/exynos4412-smdk4412.dts @@ -14,6 +14,7 @@ /dts-v1/; #include "exynos4412.dtsi" +#include "exynos-mfc-reserved-memory.dtsi" / { model = "Samsung SMDK evaluation board based on Exynos4412"; @@ -111,12 +112,6 @@ }; }; -&mfc { - samsung,mfc-r = <0x43000000 0x800000>; - samsung,mfc-l = <0x51000000 0x800000>; - status = "okay"; -}; - &pinctrl_1 { keypad_rows: keypad-rows { samsung,pins = "gpx2-0", "gpx2-1", "gpx2-2"; diff --git a/arch/arm/boot/dts/exynos4412-trats2.dts b/arch/arm/boot/dts/exynos4412-trats2.dts index 9336fd482..129e973a0 100644 --- a/arch/arm/boot/dts/exynos4412-trats2.dts +++ b/arch/arm/boot/dts/exynos4412-trats2.dts @@ -253,7 +253,7 @@ }; thermistor-ap { - compatible = "ntc,ncp15wb473"; + compatible = "murata,ncp15wb473"; pullup-uv = <1800000>; /* VCC_1.8V_AP */ pullup-ohm = <100000>; /* 100K */ pulldown-ohm = <100000>; /* 100K */ @@ -261,7 +261,7 @@ }; thermistor-battery { - compatible = "ntc,ncp15wb473"; + compatible = "murata,ncp15wb473"; pullup-uv = <1800000>; /* VCC_1.8V_AP */ pullup-ohm = <100000>; /* 100K */ pulldown-ohm = <100000>; /* 100K */ diff --git a/arch/arm/boot/dts/exynos5.dtsi b/arch/arm/boot/dts/exynos5.dtsi index d5c0f18a4..cab91782e 100644 --- a/arch/arm/boot/dts/exynos5.dtsi +++ b/arch/arm/boot/dts/exynos5.dtsi @@ -20,97 +20,160 @@ interrupt-parent = <&gic>; aliases { + i2c0 = &i2c_0; + i2c1 = &i2c_1; + i2c2 = &i2c_2; + i2c3 = &i2c_3; serial0 = &serial_0; serial1 = &serial_1; serial2 = &serial_2; serial3 = &serial_3; }; - chipid@10000000 { - compatible = "samsung,exynos4210-chipid"; - reg = <0x10000000 0x100>; - }; + soc: soc { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges; - memory-controller@12250000 { - compatible = "samsung,exynos4210-srom"; - reg = <0x12250000 0x14>; - }; + chipid@10000000 { + compatible = "samsung,exynos4210-chipid"; + reg = <0x10000000 0x100>; + }; - combiner: interrupt-controller@10440000 { - compatible = "samsung,exynos4210-combiner"; - #interrupt-cells = <2>; - interrupt-controller; - samsung,combiner-nr = <32>; - reg = <0x10440000 0x1000>; - interrupts = <0 0 0>, <0 1 0>, <0 2 0>, <0 3 0>, - <0 4 0>, <0 5 0>, <0 6 0>, <0 7 0>, - <0 8 0>, <0 9 0>, <0 10 0>, <0 11 0>, - <0 12 0>, <0 13 0>, <0 14 0>, <0 15 0>, - <0 16 0>, <0 17 0>, <0 18 0>, <0 19 0>, - <0 20 0>, <0 21 0>, <0 22 0>, <0 23 0>, - <0 24 0>, <0 25 0>, <0 26 0>, <0 27 0>, - <0 28 0>, <0 29 0>, <0 30 0>, <0 31 0>; - }; + sromc: memory-controller@12250000 { + compatible = "samsung,exynos4210-srom"; + reg = <0x12250000 0x14>; + }; - gic: interrupt-controller@10481000 { - compatible = "arm,cortex-a15-gic", "arm,cortex-a9-gic"; - #interrupt-cells = <3>; - interrupt-controller; - reg = <0x10481000 0x1000>, - <0x10482000 0x1000>, - <0x10484000 0x2000>, - <0x10486000 0x2000>; - interrupts = <1 9 0xf04>; - }; + combiner: interrupt-controller@10440000 { + compatible = "samsung,exynos4210-combiner"; + #interrupt-cells = <2>; + interrupt-controller; + samsung,combiner-nr = <32>; + reg = <0x10440000 0x1000>; + interrupts = <0 0 0>, <0 1 0>, <0 2 0>, <0 3 0>, + <0 4 0>, <0 5 0>, <0 6 0>, <0 7 0>, + <0 8 0>, <0 9 0>, <0 10 0>, <0 11 0>, + <0 12 0>, <0 13 0>, <0 14 0>, <0 15 0>, + <0 16 0>, <0 17 0>, <0 18 0>, <0 19 0>, + <0 20 0>, <0 21 0>, <0 22 0>, <0 23 0>, + <0 24 0>, <0 25 0>, <0 26 0>, <0 27 0>, + <0 28 0>, <0 29 0>, <0 30 0>, <0 31 0>; + }; - serial_0: serial@12C00000 { - compatible = "samsung,exynos4210-uart"; - reg = <0x12C00000 0x100>; - interrupts = <0 51 0>; - }; + gic: interrupt-controller@10481000 { + compatible = "arm,cortex-a15-gic", "arm,cortex-a9-gic"; + #interrupt-cells = <3>; + interrupt-controller; + reg = <0x10481000 0x1000>, + <0x10482000 0x1000>, + <0x10484000 0x2000>, + <0x10486000 0x2000>; + interrupts = <1 9 0xf04>; + }; - serial_1: serial@12C10000 { - compatible = "samsung,exynos4210-uart"; - reg = <0x12C10000 0x100>; - interrupts = <0 52 0>; - }; + sysreg_system_controller: syscon@10050000 { + compatible = "samsung,exynos5-sysreg", "syscon"; + reg = <0x10050000 0x5000>; + }; - serial_2: serial@12C20000 { - compatible = "samsung,exynos4210-uart"; - reg = <0x12C20000 0x100>; - interrupts = <0 53 0>; - }; + serial_0: serial@12C00000 { + compatible = "samsung,exynos4210-uart"; + reg = <0x12C00000 0x100>; + interrupts = <0 51 0>; + }; - serial_3: serial@12C30000 { - compatible = "samsung,exynos4210-uart"; - reg = <0x12C30000 0x100>; - interrupts = <0 54 0>; - }; + serial_1: serial@12C10000 { + compatible = "samsung,exynos4210-uart"; + reg = <0x12C10000 0x100>; + interrupts = <0 52 0>; + }; - rtc: rtc@101E0000 { - compatible = "samsung,s3c6410-rtc"; - reg = <0x101E0000 0x100>; - interrupts = <0 43 0>, <0 44 0>; - status = "disabled"; - }; + serial_2: serial@12C20000 { + compatible = "samsung,exynos4210-uart"; + reg = <0x12C20000 0x100>; + interrupts = <0 53 0>; + }; - fimd: fimd@14400000 { - compatible = "samsung,exynos5250-fimd"; - interrupt-parent = <&combiner>; - reg = <0x14400000 0x40000>; - interrupt-names = "fifo", "vsync", "lcd_sys"; - interrupts = <18 4>, <18 5>, <18 6>; - samsung,sysreg = <&sysreg_system_controller>; - status = "disabled"; - }; + serial_3: serial@12C30000 { + compatible = "samsung,exynos4210-uart"; + reg = <0x12C30000 0x100>; + interrupts = <0 54 0>; + }; - dp: dp-controller@145B0000 { - compatible = "samsung,exynos5-dp"; - reg = <0x145B0000 0x1000>; - interrupts = <10 3>; - interrupt-parent = <&combiner>; - #address-cells = <1>; - #size-cells = <0>; - status = "disabled"; + i2c_0: i2c@12C60000 { + compatible = "samsung,s3c2440-i2c"; + reg = <0x12C60000 0x100>; + interrupts = <0 56 0>; + #address-cells = <1>; + #size-cells = <0>; + samsung,sysreg-phandle = <&sysreg_system_controller>; + status = "disabled"; + }; + + i2c_1: i2c@12C70000 { + compatible = "samsung,s3c2440-i2c"; + reg = <0x12C70000 0x100>; + interrupts = <0 57 0>; + #address-cells = <1>; + #size-cells = <0>; + samsung,sysreg-phandle = <&sysreg_system_controller>; + status = "disabled"; + }; + + i2c_2: i2c@12C80000 { + compatible = "samsung,s3c2440-i2c"; + reg = <0x12C80000 0x100>; + interrupts = <0 58 0>; + #address-cells = <1>; + #size-cells = <0>; + samsung,sysreg-phandle = <&sysreg_system_controller>; + status = "disabled"; + }; + + i2c_3: i2c@12C90000 { + compatible = "samsung,s3c2440-i2c"; + reg = <0x12C90000 0x100>; + interrupts = <0 59 0>; + #address-cells = <1>; + #size-cells = <0>; + samsung,sysreg-phandle = <&sysreg_system_controller>; + status = "disabled"; + }; + + pwm: pwm@12DD0000 { + compatible = "samsung,exynos4210-pwm"; + reg = <0x12DD0000 0x100>; + samsung,pwm-outputs = <0>, <1>, <2>, <3>; + #pwm-cells = <3>; + }; + + rtc: rtc@101E0000 { + compatible = "samsung,s3c6410-rtc"; + reg = <0x101E0000 0x100>; + interrupts = <0 43 0>, <0 44 0>; + status = "disabled"; + }; + + fimd: fimd@14400000 { + compatible = "samsung,exynos5250-fimd"; + interrupt-parent = <&combiner>; + reg = <0x14400000 0x40000>; + interrupt-names = "fifo", "vsync", "lcd_sys"; + interrupts = <18 4>, <18 5>, <18 6>; + samsung,sysreg = <&sysreg_system_controller>; + status = "disabled"; + }; + + dp: dp-controller@145B0000 { + compatible = "samsung,exynos5-dp"; + reg = <0x145B0000 0x1000>; + interrupts = <10 3>; + interrupt-parent = <&combiner>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; }; }; diff --git a/arch/arm/boot/dts/exynos5250-arndale.dts b/arch/arm/boot/dts/exynos5250-arndale.dts index 85dad29c0..ea70603f6 100644 --- a/arch/arm/boot/dts/exynos5250-arndale.dts +++ b/arch/arm/boot/dts/exynos5250-arndale.dts @@ -14,6 +14,7 @@ #include <dt-bindings/interrupt-controller/irq.h> #include <dt-bindings/input/input.h> #include "exynos5250.dtsi" +#include "exynos-mfc-reserved-memory.dtsi" / { model = "Insignal Arndale evaluation board based on EXYNOS5250"; @@ -515,11 +516,6 @@ status = "okay"; }; -&mfc { - samsung,mfc-r = <0x43000000 0x800000>; - samsung,mfc-l = <0x51000000 0x800000>; -}; - &mmc_0 { status = "okay"; num-slots = <1>; diff --git a/arch/arm/boot/dts/exynos5250-smdk5250.dts b/arch/arm/boot/dts/exynos5250-smdk5250.dts index b7992b13c..381af134c 100644 --- a/arch/arm/boot/dts/exynos5250-smdk5250.dts +++ b/arch/arm/boot/dts/exynos5250-smdk5250.dts @@ -13,6 +13,7 @@ #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/interrupt-controller/irq.h> #include "exynos5250.dtsi" +#include "exynos-mfc-reserved-memory.dtsi" / { model = "SAMSUNG SMDK5250 board based on EXYNOS5250"; @@ -343,11 +344,6 @@ status = "okay"; }; -&mfc { - samsung,mfc-r = <0x43000000 0x800000>; - samsung,mfc-l = <0x51000000 0x800000>; -}; - &mmc_0 { status = "okay"; num-slots = <1>; diff --git a/arch/arm/boot/dts/exynos5250-snow-common.dtsi b/arch/arm/boot/dts/exynos5250-snow-common.dtsi index fa14f77df..fadbea744 100644 --- a/arch/arm/boot/dts/exynos5250-snow-common.dtsi +++ b/arch/arm/boot/dts/exynos5250-snow-common.dtsi @@ -61,7 +61,7 @@ #address-cells = <1>; #size-cells = <0>; - i2c-parent = <&{/i2c@12CA0000}>; + i2c-parent = <&i2c_4>; our-claim-gpio = <&gpf0 3 GPIO_ACTIVE_LOW>; their-claim-gpios = <&gpe0 4 GPIO_ACTIVE_LOW>; diff --git a/arch/arm/boot/dts/exynos5250-spring.dts b/arch/arm/boot/dts/exynos5250-spring.dts index ac291f540..44f4292bf 100644 --- a/arch/arm/boot/dts/exynos5250-spring.dts +++ b/arch/arm/boot/dts/exynos5250-spring.dts @@ -14,6 +14,7 @@ #include <dt-bindings/interrupt-controller/irq.h> #include <dt-bindings/input/input.h> #include "exynos5250.dtsi" +#include "exynos-mfc-reserved-memory.dtsi" / { model = "Google Spring"; @@ -424,11 +425,6 @@ status = "okay"; }; -&mfc { - samsung,mfc-r = <0x43000000 0x800000>; - samsung,mfc-l = <0x51000000 0x800000>; -}; - &mmc_0 { status = "okay"; num-slots = <1>; diff --git a/arch/arm/boot/dts/exynos5250.dtsi b/arch/arm/boot/dts/exynos5250.dtsi index c7158b2fb..f7357d99b 100644 --- a/arch/arm/boot/dts/exynos5250.dtsi +++ b/arch/arm/boot/dts/exynos5250.dtsi @@ -37,10 +37,6 @@ mshc1 = &mmc_1; mshc2 = &mmc_2; mshc3 = &mmc_3; - i2c0 = &i2c_0; - i2c1 = &i2c_1; - i2c2 = &i2c_2; - i2c3 = &i2c_3; i2c4 = &i2c_4; i2c5 = &i2c_5; i2c6 = &i2c_6; @@ -96,962 +92,896 @@ }; }; - sysram@02020000 { - compatible = "mmio-sram"; - reg = <0x02020000 0x30000>; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0 0x02020000 0x30000>; + soc: soc { + sysram@02020000 { + compatible = "mmio-sram"; + reg = <0x02020000 0x30000>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x02020000 0x30000>; - smp-sysram@0 { - compatible = "samsung,exynos4210-sysram"; - reg = <0x0 0x1000>; - }; + smp-sysram@0 { + compatible = "samsung,exynos4210-sysram"; + reg = <0x0 0x1000>; + }; - smp-sysram@2f000 { - compatible = "samsung,exynos4210-sysram-ns"; - reg = <0x2f000 0x1000>; + smp-sysram@2f000 { + compatible = "samsung,exynos4210-sysram-ns"; + reg = <0x2f000 0x1000>; + }; }; - }; - pd_gsc: gsc-power-domain@10044000 { - compatible = "samsung,exynos4210-pd"; - reg = <0x10044000 0x20>; - #power-domain-cells = <0>; - }; + pd_gsc: gsc-power-domain@10044000 { + compatible = "samsung,exynos4210-pd"; + reg = <0x10044000 0x20>; + #power-domain-cells = <0>; + }; - pd_mfc: mfc-power-domain@10044040 { - compatible = "samsung,exynos4210-pd"; - reg = <0x10044040 0x20>; - #power-domain-cells = <0>; - }; + pd_mfc: mfc-power-domain@10044040 { + compatible = "samsung,exynos4210-pd"; + reg = <0x10044040 0x20>; + #power-domain-cells = <0>; + }; - pd_disp1: disp1-power-domain@100440A0 { - compatible = "samsung,exynos4210-pd"; - reg = <0x100440A0 0x20>; - #power-domain-cells = <0>; - clocks = <&clock CLK_FIN_PLL>, - <&clock CLK_MOUT_ACLK200_DISP1_SUB>, - <&clock CLK_MOUT_ACLK300_DISP1_SUB>; - clock-names = "oscclk", "clk0", "clk1"; - }; + pd_disp1: disp1-power-domain@100440A0 { + compatible = "samsung,exynos4210-pd"; + reg = <0x100440A0 0x20>; + #power-domain-cells = <0>; + clocks = <&clock CLK_FIN_PLL>, + <&clock CLK_MOUT_ACLK200_DISP1_SUB>, + <&clock CLK_MOUT_ACLK300_DISP1_SUB>; + clock-names = "oscclk", "clk0", "clk1"; + }; - clock: clock-controller@10010000 { - compatible = "samsung,exynos5250-clock"; - reg = <0x10010000 0x30000>; - #clock-cells = <1>; - }; + clock: clock-controller@10010000 { + compatible = "samsung,exynos5250-clock"; + reg = <0x10010000 0x30000>; + #clock-cells = <1>; + }; - clock_audss: audss-clock-controller@3810000 { - compatible = "samsung,exynos5250-audss-clock"; - reg = <0x03810000 0x0C>; - #clock-cells = <1>; - clocks = <&clock CLK_FIN_PLL>, <&clock CLK_FOUT_EPLL>, - <&clock CLK_SCLK_AUDIO0>, <&clock CLK_DIV_PCM0>; - clock-names = "pll_ref", "pll_in", "sclk_audio", "sclk_pcm_in"; - }; + clock_audss: audss-clock-controller@3810000 { + compatible = "samsung,exynos5250-audss-clock"; + reg = <0x03810000 0x0C>; + #clock-cells = <1>; + clocks = <&clock CLK_FIN_PLL>, <&clock CLK_FOUT_EPLL>, + <&clock CLK_SCLK_AUDIO0>, <&clock CLK_DIV_PCM0>; + clock-names = "pll_ref", "pll_in", "sclk_audio", "sclk_pcm_in"; + }; - timer { - compatible = "arm,armv7-timer"; - interrupts = <1 13 0xf08>, - <1 14 0xf08>, - <1 11 0xf08>, - <1 10 0xf08>; - /* Unfortunately we need this since some versions of U-Boot - * on Exynos don't set the CNTFRQ register, so we need the - * value from DT. - */ - clock-frequency = <24000000>; - }; + timer { + compatible = "arm,armv7-timer"; + interrupts = <1 13 0xf08>, + <1 14 0xf08>, + <1 11 0xf08>, + <1 10 0xf08>; + /* + * Unfortunately we need this since some versions + * of U-Boot on Exynos don't set the CNTFRQ register, + * so we need the value from DT. + */ + clock-frequency = <24000000>; + }; - mct@101C0000 { - compatible = "samsung,exynos4210-mct"; - reg = <0x101C0000 0x800>; - interrupt-controller; - #interrupt-cells = <2>; - interrupt-parent = <&mct_map>; - interrupts = <0 0>, <1 0>, <2 0>, <3 0>, - <4 0>, <5 0>; - clocks = <&clock CLK_FIN_PLL>, <&clock CLK_MCT>; - clock-names = "fin_pll", "mct"; - - mct_map: mct-map { + mct@101C0000 { + compatible = "samsung,exynos4210-mct"; + reg = <0x101C0000 0x800>; + interrupt-controller; #interrupt-cells = <2>; - #address-cells = <0>; - #size-cells = <0>; - interrupt-map = <0x0 0 &combiner 23 3>, - <0x1 0 &combiner 23 4>, - <0x2 0 &combiner 25 2>, - <0x3 0 &combiner 25 3>, - <0x4 0 &gic 0 120 0>, - <0x5 0 &gic 0 121 0>; + interrupt-parent = <&mct_map>; + interrupts = <0 0>, <1 0>, <2 0>, <3 0>, + <4 0>, <5 0>; + clocks = <&clock CLK_FIN_PLL>, <&clock CLK_MCT>; + clock-names = "fin_pll", "mct"; + + mct_map: mct-map { + #interrupt-cells = <2>; + #address-cells = <0>; + #size-cells = <0>; + interrupt-map = <0x0 0 &combiner 23 3>, + <0x1 0 &combiner 23 4>, + <0x2 0 &combiner 25 2>, + <0x3 0 &combiner 25 3>, + <0x4 0 &gic 0 120 0>, + <0x5 0 &gic 0 121 0>; + }; }; - }; - - pmu { - compatible = "arm,cortex-a15-pmu"; - interrupt-parent = <&combiner>; - interrupts = <1 2>, <22 4>; - }; - - pinctrl_0: pinctrl@11400000 { - compatible = "samsung,exynos5250-pinctrl"; - reg = <0x11400000 0x1000>; - interrupts = <0 46 0>; - wakup_eint: wakeup-interrupt-controller { - compatible = "samsung,exynos4210-wakeup-eint"; - interrupt-parent = <&gic>; - interrupts = <0 32 0>; + pmu { + compatible = "arm,cortex-a15-pmu"; + interrupt-parent = <&combiner>; + interrupts = <1 2>, <22 4>; }; - }; - - pinctrl_1: pinctrl@13400000 { - compatible = "samsung,exynos5250-pinctrl"; - reg = <0x13400000 0x1000>; - interrupts = <0 45 0>; - }; - pinctrl_2: pinctrl@10d10000 { - compatible = "samsung,exynos5250-pinctrl"; - reg = <0x10d10000 0x1000>; - interrupts = <0 50 0>; - }; - - pinctrl_3: pinctrl@03860000 { - compatible = "samsung,exynos5250-pinctrl"; - reg = <0x03860000 0x1000>; - interrupts = <0 47 0>; - }; - - pmu_system_controller: system-controller@10040000 { - compatible = "samsung,exynos5250-pmu", "syscon"; - reg = <0x10040000 0x5000>; - clock-names = "clkout16"; - clocks = <&clock CLK_FIN_PLL>; - #clock-cells = <1>; - interrupt-controller; - #interrupt-cells = <3>; - interrupt-parent = <&gic>; - }; + pinctrl_0: pinctrl@11400000 { + compatible = "samsung,exynos5250-pinctrl"; + reg = <0x11400000 0x1000>; + interrupts = <0 46 0>; - sysreg_system_controller: syscon@10050000 { - compatible = "samsung,exynos5-sysreg", "syscon"; - reg = <0x10050000 0x5000>; - }; + wakup_eint: wakeup-interrupt-controller { + compatible = "samsung,exynos4210-wakeup-eint"; + interrupt-parent = <&gic>; + interrupts = <0 32 0>; + }; + }; - watchdog@101D0000 { - compatible = "samsung,exynos5250-wdt"; - reg = <0x101D0000 0x100>; - interrupts = <0 42 0>; - clocks = <&clock CLK_WDT>; - clock-names = "watchdog"; - samsung,syscon-phandle = <&pmu_system_controller>; - }; + pinctrl_1: pinctrl@13400000 { + compatible = "samsung,exynos5250-pinctrl"; + reg = <0x13400000 0x1000>; + interrupts = <0 45 0>; + }; - g2d@10850000 { - compatible = "samsung,exynos5250-g2d"; - reg = <0x10850000 0x1000>; - interrupts = <0 91 0>; - clocks = <&clock CLK_G2D>; - clock-names = "fimg2d"; - iommus = <&sysmmu_g2d>; - }; + pinctrl_2: pinctrl@10d10000 { + compatible = "samsung,exynos5250-pinctrl"; + reg = <0x10d10000 0x1000>; + interrupts = <0 50 0>; + }; - mfc: codec@11000000 { - compatible = "samsung,mfc-v6"; - reg = <0x11000000 0x10000>; - interrupts = <0 96 0>; - power-domains = <&pd_mfc>; - clocks = <&clock CLK_MFC>; - clock-names = "mfc"; - iommus = <&sysmmu_mfc_l>, <&sysmmu_mfc_r>; - iommu-names = "left", "right"; - }; + pinctrl_3: pinctrl@03860000 { + compatible = "samsung,exynos5250-pinctrl"; + reg = <0x03860000 0x1000>; + interrupts = <0 47 0>; + }; - rotator: rotator@11C00000 { - compatible = "samsung,exynos5250-rotator"; - reg = <0x11C00000 0x64>; - interrupts = <0 84 0>; - clocks = <&clock CLK_ROTATOR>; - clock-names = "rotator"; - iommus = <&sysmmu_rotator>; - }; + pmu_system_controller: system-controller@10040000 { + compatible = "samsung,exynos5250-pmu", "syscon"; + reg = <0x10040000 0x5000>; + clock-names = "clkout16"; + clocks = <&clock CLK_FIN_PLL>; + #clock-cells = <1>; + interrupt-controller; + #interrupt-cells = <3>; + interrupt-parent = <&gic>; + }; - tmu: tmu@10060000 { - compatible = "samsung,exynos5250-tmu"; - reg = <0x10060000 0x100>; - interrupts = <0 65 0>; - clocks = <&clock CLK_TMU>; - clock-names = "tmu_apbif"; - #include "exynos4412-tmu-sensor-conf.dtsi" - }; + watchdog@101D0000 { + compatible = "samsung,exynos5250-wdt"; + reg = <0x101D0000 0x100>; + interrupts = <0 42 0>; + clocks = <&clock CLK_WDT>; + clock-names = "watchdog"; + samsung,syscon-phandle = <&pmu_system_controller>; + }; - thermal-zones { - cpu_thermal: cpu-thermal { - polling-delay-passive = <0>; - polling-delay = <0>; - thermal-sensors = <&tmu 0>; + g2d@10850000 { + compatible = "samsung,exynos5250-g2d"; + reg = <0x10850000 0x1000>; + interrupts = <0 91 0>; + clocks = <&clock CLK_G2D>; + clock-names = "fimg2d"; + iommus = <&sysmmu_g2d>; + }; - cooling-maps { - map0 { - /* Corresponds to 800MHz at freq_table */ - cooling-device = <&cpu0 9 9>; - }; - map1 { - /* Corresponds to 200MHz at freq_table */ - cooling-device = <&cpu0 15 15>; - }; - }; + mfc: codec@11000000 { + compatible = "samsung,mfc-v6"; + reg = <0x11000000 0x10000>; + interrupts = <0 96 0>; + power-domains = <&pd_mfc>; + clocks = <&clock CLK_MFC>; + clock-names = "mfc"; + iommus = <&sysmmu_mfc_l>, <&sysmmu_mfc_r>; + iommu-names = "left", "right"; }; - }; - sata: sata@122F0000 { - compatible = "snps,dwc-ahci"; - samsung,sata-freq = <66>; - reg = <0x122F0000 0x1ff>; - interrupts = <0 115 0>; - clocks = <&clock CLK_SATA>, <&clock CLK_SCLK_SATA>; - clock-names = "sata", "sclk_sata"; - phys = <&sata_phy>; - phy-names = "sata-phy"; - status = "disabled"; - }; + rotator: rotator@11C00000 { + compatible = "samsung,exynos5250-rotator"; + reg = <0x11C00000 0x64>; + interrupts = <0 84 0>; + clocks = <&clock CLK_ROTATOR>; + clock-names = "rotator"; + iommus = <&sysmmu_rotator>; + }; - sata_phy: sata-phy@12170000 { - compatible = "samsung,exynos5250-sata-phy"; - reg = <0x12170000 0x1ff>; - clocks = <&clock CLK_SATA_PHYCTRL>; - clock-names = "sata_phyctrl"; - #phy-cells = <0>; - samsung,syscon-phandle = <&pmu_system_controller>; - status = "disabled"; - }; + tmu: tmu@10060000 { + compatible = "samsung,exynos5250-tmu"; + reg = <0x10060000 0x100>; + interrupts = <0 65 0>; + clocks = <&clock CLK_TMU>; + clock-names = "tmu_apbif"; + #include "exynos4412-tmu-sensor-conf.dtsi" + }; - i2c_0: i2c@12C60000 { - compatible = "samsung,s3c2440-i2c"; - reg = <0x12C60000 0x100>; - interrupts = <0 56 0>; - #address-cells = <1>; - #size-cells = <0>; - clocks = <&clock CLK_I2C0>; - clock-names = "i2c"; - pinctrl-names = "default"; - pinctrl-0 = <&i2c0_bus>; - samsung,sysreg-phandle = <&sysreg_system_controller>; - status = "disabled"; - }; + sata: sata@122F0000 { + compatible = "snps,dwc-ahci"; + samsung,sata-freq = <66>; + reg = <0x122F0000 0x1ff>; + interrupts = <0 115 0>; + clocks = <&clock CLK_SATA>, <&clock CLK_SCLK_SATA>; + clock-names = "sata", "sclk_sata"; + phys = <&sata_phy>; + phy-names = "sata-phy"; + status = "disabled"; + }; - i2c_1: i2c@12C70000 { - compatible = "samsung,s3c2440-i2c"; - reg = <0x12C70000 0x100>; - interrupts = <0 57 0>; - #address-cells = <1>; - #size-cells = <0>; - clocks = <&clock CLK_I2C1>; - clock-names = "i2c"; - pinctrl-names = "default"; - pinctrl-0 = <&i2c1_bus>; - samsung,sysreg-phandle = <&sysreg_system_controller>; - status = "disabled"; - }; + sata_phy: sata-phy@12170000 { + compatible = "samsung,exynos5250-sata-phy"; + reg = <0x12170000 0x1ff>; + clocks = <&clock CLK_SATA_PHYCTRL>; + clock-names = "sata_phyctrl"; + #phy-cells = <0>; + samsung,syscon-phandle = <&pmu_system_controller>; + status = "disabled"; + }; - i2c_2: i2c@12C80000 { - compatible = "samsung,s3c2440-i2c"; - reg = <0x12C80000 0x100>; - interrupts = <0 58 0>; - #address-cells = <1>; - #size-cells = <0>; - clocks = <&clock CLK_I2C2>; - clock-names = "i2c"; - pinctrl-names = "default"; - pinctrl-0 = <&i2c2_bus>; - samsung,sysreg-phandle = <&sysreg_system_controller>; - status = "disabled"; - }; + /* i2c_0-3 are defined in exynos5.dtsi */ + i2c_4: i2c@12CA0000 { + compatible = "samsung,s3c2440-i2c"; + reg = <0x12CA0000 0x100>; + interrupts = <0 60 0>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&clock CLK_I2C4>; + clock-names = "i2c"; + pinctrl-names = "default"; + pinctrl-0 = <&i2c4_bus>; + status = "disabled"; + }; - i2c_3: i2c@12C90000 { - compatible = "samsung,s3c2440-i2c"; - reg = <0x12C90000 0x100>; - interrupts = <0 59 0>; - #address-cells = <1>; - #size-cells = <0>; - clocks = <&clock CLK_I2C3>; - clock-names = "i2c"; - pinctrl-names = "default"; - pinctrl-0 = <&i2c3_bus>; - samsung,sysreg-phandle = <&sysreg_system_controller>; - status = "disabled"; - }; + i2c_5: i2c@12CB0000 { + compatible = "samsung,s3c2440-i2c"; + reg = <0x12CB0000 0x100>; + interrupts = <0 61 0>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&clock CLK_I2C5>; + clock-names = "i2c"; + pinctrl-names = "default"; + pinctrl-0 = <&i2c5_bus>; + status = "disabled"; + }; - i2c_4: i2c@12CA0000 { - compatible = "samsung,s3c2440-i2c"; - reg = <0x12CA0000 0x100>; - interrupts = <0 60 0>; - #address-cells = <1>; - #size-cells = <0>; - clocks = <&clock CLK_I2C4>; - clock-names = "i2c"; - pinctrl-names = "default"; - pinctrl-0 = <&i2c4_bus>; - status = "disabled"; - }; + i2c_6: i2c@12CC0000 { + compatible = "samsung,s3c2440-i2c"; + reg = <0x12CC0000 0x100>; + interrupts = <0 62 0>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&clock CLK_I2C6>; + clock-names = "i2c"; + pinctrl-names = "default"; + pinctrl-0 = <&i2c6_bus>; + status = "disabled"; + }; - i2c_5: i2c@12CB0000 { - compatible = "samsung,s3c2440-i2c"; - reg = <0x12CB0000 0x100>; - interrupts = <0 61 0>; - #address-cells = <1>; - #size-cells = <0>; - clocks = <&clock CLK_I2C5>; - clock-names = "i2c"; - pinctrl-names = "default"; - pinctrl-0 = <&i2c5_bus>; - status = "disabled"; - }; + i2c_7: i2c@12CD0000 { + compatible = "samsung,s3c2440-i2c"; + reg = <0x12CD0000 0x100>; + interrupts = <0 63 0>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&clock CLK_I2C7>; + clock-names = "i2c"; + pinctrl-names = "default"; + pinctrl-0 = <&i2c7_bus>; + status = "disabled"; + }; - i2c_6: i2c@12CC0000 { - compatible = "samsung,s3c2440-i2c"; - reg = <0x12CC0000 0x100>; - interrupts = <0 62 0>; - #address-cells = <1>; - #size-cells = <0>; - clocks = <&clock CLK_I2C6>; - clock-names = "i2c"; - pinctrl-names = "default"; - pinctrl-0 = <&i2c6_bus>; - status = "disabled"; - }; + i2c_8: i2c@12CE0000 { + compatible = "samsung,s3c2440-hdmiphy-i2c"; + reg = <0x12CE0000 0x1000>; + interrupts = <0 64 0>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&clock CLK_I2C_HDMI>; + clock-names = "i2c"; + status = "disabled"; + }; - i2c_7: i2c@12CD0000 { - compatible = "samsung,s3c2440-i2c"; - reg = <0x12CD0000 0x100>; - interrupts = <0 63 0>; - #address-cells = <1>; - #size-cells = <0>; - clocks = <&clock CLK_I2C7>; - clock-names = "i2c"; - pinctrl-names = "default"; - pinctrl-0 = <&i2c7_bus>; - status = "disabled"; - }; + i2c_9: i2c@121D0000 { + compatible = "samsung,exynos5-sata-phy-i2c"; + reg = <0x121D0000 0x100>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&clock CLK_SATA_PHYI2C>; + clock-names = "i2c"; + status = "disabled"; + }; - i2c_8: i2c@12CE0000 { - compatible = "samsung,s3c2440-hdmiphy-i2c"; - reg = <0x12CE0000 0x1000>; - interrupts = <0 64 0>; - #address-cells = <1>; - #size-cells = <0>; - clocks = <&clock CLK_I2C_HDMI>; - clock-names = "i2c"; - status = "disabled"; - }; + spi_0: spi@12d20000 { + compatible = "samsung,exynos4210-spi"; + status = "disabled"; + reg = <0x12d20000 0x100>; + interrupts = <0 66 0>; + dmas = <&pdma0 5 + &pdma0 4>; + dma-names = "tx", "rx"; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&clock CLK_SPI0>, <&clock CLK_SCLK_SPI0>; + clock-names = "spi", "spi_busclk0"; + pinctrl-names = "default"; + pinctrl-0 = <&spi0_bus>; + }; - i2c_9: i2c@121D0000 { - compatible = "samsung,exynos5-sata-phy-i2c"; - reg = <0x121D0000 0x100>; - #address-cells = <1>; - #size-cells = <0>; - clocks = <&clock CLK_SATA_PHYI2C>; - clock-names = "i2c"; - status = "disabled"; - }; + spi_1: spi@12d30000 { + compatible = "samsung,exynos4210-spi"; + status = "disabled"; + reg = <0x12d30000 0x100>; + interrupts = <0 67 0>; + dmas = <&pdma1 5 + &pdma1 4>; + dma-names = "tx", "rx"; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&clock CLK_SPI1>, <&clock CLK_SCLK_SPI1>; + clock-names = "spi", "spi_busclk0"; + pinctrl-names = "default"; + pinctrl-0 = <&spi1_bus>; + }; - spi_0: spi@12d20000 { - compatible = "samsung,exynos4210-spi"; - status = "disabled"; - reg = <0x12d20000 0x100>; - interrupts = <0 66 0>; - dmas = <&pdma0 5 - &pdma0 4>; - dma-names = "tx", "rx"; - #address-cells = <1>; - #size-cells = <0>; - clocks = <&clock CLK_SPI0>, <&clock CLK_SCLK_SPI0>; - clock-names = "spi", "spi_busclk0"; - pinctrl-names = "default"; - pinctrl-0 = <&spi0_bus>; - }; + spi_2: spi@12d40000 { + compatible = "samsung,exynos4210-spi"; + status = "disabled"; + reg = <0x12d40000 0x100>; + interrupts = <0 68 0>; + dmas = <&pdma0 7 + &pdma0 6>; + dma-names = "tx", "rx"; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&clock CLK_SPI2>, <&clock CLK_SCLK_SPI2>; + clock-names = "spi", "spi_busclk0"; + pinctrl-names = "default"; + pinctrl-0 = <&spi2_bus>; + }; - spi_1: spi@12d30000 { - compatible = "samsung,exynos4210-spi"; - status = "disabled"; - reg = <0x12d30000 0x100>; - interrupts = <0 67 0>; - dmas = <&pdma1 5 - &pdma1 4>; - dma-names = "tx", "rx"; - #address-cells = <1>; - #size-cells = <0>; - clocks = <&clock CLK_SPI1>, <&clock CLK_SCLK_SPI1>; - clock-names = "spi", "spi_busclk0"; - pinctrl-names = "default"; - pinctrl-0 = <&spi1_bus>; - }; + mmc_0: mmc@12200000 { + compatible = "samsung,exynos5250-dw-mshc"; + interrupts = <0 75 0>; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x12200000 0x1000>; + clocks = <&clock CLK_SDMMC0>, <&clock CLK_SCLK_MMC0>; + clock-names = "biu", "ciu"; + fifo-depth = <0x80>; + status = "disabled"; + }; - spi_2: spi@12d40000 { - compatible = "samsung,exynos4210-spi"; - status = "disabled"; - reg = <0x12d40000 0x100>; - interrupts = <0 68 0>; - dmas = <&pdma0 7 - &pdma0 6>; - dma-names = "tx", "rx"; - #address-cells = <1>; - #size-cells = <0>; - clocks = <&clock CLK_SPI2>, <&clock CLK_SCLK_SPI2>; - clock-names = "spi", "spi_busclk0"; - pinctrl-names = "default"; - pinctrl-0 = <&spi2_bus>; - }; + mmc_1: mmc@12210000 { + compatible = "samsung,exynos5250-dw-mshc"; + interrupts = <0 76 0>; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x12210000 0x1000>; + clocks = <&clock CLK_SDMMC1>, <&clock CLK_SCLK_MMC1>; + clock-names = "biu", "ciu"; + fifo-depth = <0x80>; + status = "disabled"; + }; - mmc_0: mmc@12200000 { - compatible = "samsung,exynos5250-dw-mshc"; - interrupts = <0 75 0>; - #address-cells = <1>; - #size-cells = <0>; - reg = <0x12200000 0x1000>; - clocks = <&clock CLK_SDMMC0>, <&clock CLK_SCLK_MMC0>; - clock-names = "biu", "ciu"; - fifo-depth = <0x80>; - status = "disabled"; - }; + mmc_2: mmc@12220000 { + compatible = "samsung,exynos5250-dw-mshc"; + interrupts = <0 77 0>; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x12220000 0x1000>; + clocks = <&clock CLK_SDMMC2>, <&clock CLK_SCLK_MMC2>; + clock-names = "biu", "ciu"; + fifo-depth = <0x80>; + status = "disabled"; + }; - mmc_1: mmc@12210000 { - compatible = "samsung,exynos5250-dw-mshc"; - interrupts = <0 76 0>; - #address-cells = <1>; - #size-cells = <0>; - reg = <0x12210000 0x1000>; - clocks = <&clock CLK_SDMMC1>, <&clock CLK_SCLK_MMC1>; - clock-names = "biu", "ciu"; - fifo-depth = <0x80>; - status = "disabled"; - }; + mmc_3: mmc@12230000 { + compatible = "samsung,exynos5250-dw-mshc"; + reg = <0x12230000 0x1000>; + interrupts = <0 78 0>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&clock CLK_SDMMC3>, <&clock CLK_SCLK_MMC3>; + clock-names = "biu", "ciu"; + fifo-depth = <0x80>; + status = "disabled"; + }; - mmc_2: mmc@12220000 { - compatible = "samsung,exynos5250-dw-mshc"; - interrupts = <0 77 0>; - #address-cells = <1>; - #size-cells = <0>; - reg = <0x12220000 0x1000>; - clocks = <&clock CLK_SDMMC2>, <&clock CLK_SCLK_MMC2>; - clock-names = "biu", "ciu"; - fifo-depth = <0x80>; - status = "disabled"; - }; + i2s0: i2s@03830000 { + compatible = "samsung,s5pv210-i2s"; + status = "disabled"; + reg = <0x03830000 0x100>; + dmas = <&pdma0 10 + &pdma0 9 + &pdma0 8>; + dma-names = "tx", "rx", "tx-sec"; + clocks = <&clock_audss EXYNOS_I2S_BUS>, + <&clock_audss EXYNOS_I2S_BUS>, + <&clock_audss EXYNOS_SCLK_I2S>; + clock-names = "iis", "i2s_opclk0", "i2s_opclk1"; + samsung,idma-addr = <0x03000000>; + pinctrl-names = "default"; + pinctrl-0 = <&i2s0_bus>; + }; - mmc_3: mmc@12230000 { - compatible = "samsung,exynos5250-dw-mshc"; - reg = <0x12230000 0x1000>; - interrupts = <0 78 0>; - #address-cells = <1>; - #size-cells = <0>; - clocks = <&clock CLK_SDMMC3>, <&clock CLK_SCLK_MMC3>; - clock-names = "biu", "ciu"; - fifo-depth = <0x80>; - status = "disabled"; - }; + i2s1: i2s@12D60000 { + compatible = "samsung,s3c6410-i2s"; + status = "disabled"; + reg = <0x12D60000 0x100>; + dmas = <&pdma1 12 + &pdma1 11>; + dma-names = "tx", "rx"; + clocks = <&clock CLK_I2S1>, <&clock CLK_DIV_I2S1>; + clock-names = "iis", "i2s_opclk0"; + pinctrl-names = "default"; + pinctrl-0 = <&i2s1_bus>; + }; - i2s0: i2s@03830000 { - compatible = "samsung,s5pv210-i2s"; - status = "disabled"; - reg = <0x03830000 0x100>; - dmas = <&pdma0 10 - &pdma0 9 - &pdma0 8>; - dma-names = "tx", "rx", "tx-sec"; - clocks = <&clock_audss EXYNOS_I2S_BUS>, - <&clock_audss EXYNOS_I2S_BUS>, - <&clock_audss EXYNOS_SCLK_I2S>; - clock-names = "iis", "i2s_opclk0", "i2s_opclk1"; - samsung,idma-addr = <0x03000000>; - pinctrl-names = "default"; - pinctrl-0 = <&i2s0_bus>; - }; + i2s2: i2s@12D70000 { + compatible = "samsung,s3c6410-i2s"; + status = "disabled"; + reg = <0x12D70000 0x100>; + dmas = <&pdma0 12 + &pdma0 11>; + dma-names = "tx", "rx"; + clocks = <&clock CLK_I2S2>, <&clock CLK_DIV_I2S2>; + clock-names = "iis", "i2s_opclk0"; + pinctrl-names = "default"; + pinctrl-0 = <&i2s2_bus>; + }; - i2s1: i2s@12D60000 { - compatible = "samsung,s3c6410-i2s"; - status = "disabled"; - reg = <0x12D60000 0x100>; - dmas = <&pdma1 12 - &pdma1 11>; - dma-names = "tx", "rx"; - clocks = <&clock CLK_I2S1>, <&clock CLK_DIV_I2S1>; - clock-names = "iis", "i2s_opclk0"; - pinctrl-names = "default"; - pinctrl-0 = <&i2s1_bus>; - }; + usb_dwc3 { + compatible = "samsung,exynos5250-dwusb3"; + clocks = <&clock CLK_USB3>; + clock-names = "usbdrd30"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + usbdrd_dwc3: dwc3@12000000 { + compatible = "synopsys,dwc3"; + reg = <0x12000000 0x10000>; + interrupts = <0 72 0>; + phys = <&usbdrd_phy 0>, <&usbdrd_phy 1>; + phy-names = "usb2-phy", "usb3-phy"; + }; + }; - i2s2: i2s@12D70000 { - compatible = "samsung,s3c6410-i2s"; - status = "disabled"; - reg = <0x12D70000 0x100>; - dmas = <&pdma0 12 - &pdma0 11>; - dma-names = "tx", "rx"; - clocks = <&clock CLK_I2S2>, <&clock CLK_DIV_I2S2>; - clock-names = "iis", "i2s_opclk0"; - pinctrl-names = "default"; - pinctrl-0 = <&i2s2_bus>; - }; + usbdrd_phy: phy@12100000 { + compatible = "samsung,exynos5250-usbdrd-phy"; + reg = <0x12100000 0x100>; + clocks = <&clock CLK_USB3>, <&clock CLK_FIN_PLL>; + clock-names = "phy", "ref"; + samsung,pmu-syscon = <&pmu_system_controller>; + #phy-cells = <1>; + }; - usb_dwc3 { - compatible = "samsung,exynos5250-dwusb3"; - clocks = <&clock CLK_USB3>; - clock-names = "usbdrd30"; - #address-cells = <1>; - #size-cells = <1>; - ranges; + ehci: usb@12110000 { + compatible = "samsung,exynos4210-ehci"; + reg = <0x12110000 0x100>; + interrupts = <0 71 0>; - usbdrd_dwc3: dwc3@12000000 { - compatible = "synopsys,dwc3"; - reg = <0x12000000 0x10000>; - interrupts = <0 72 0>; - phys = <&usbdrd_phy 0>, <&usbdrd_phy 1>; - phy-names = "usb2-phy", "usb3-phy"; + clocks = <&clock CLK_USB2>; + clock-names = "usbhost"; + #address-cells = <1>; + #size-cells = <0>; + port@0 { + reg = <0>; + phys = <&usb2_phy_gen 1>; + }; }; - }; - - usbdrd_phy: phy@12100000 { - compatible = "samsung,exynos5250-usbdrd-phy"; - reg = <0x12100000 0x100>; - clocks = <&clock CLK_USB3>, <&clock CLK_FIN_PLL>; - clock-names = "phy", "ref"; - samsung,pmu-syscon = <&pmu_system_controller>; - #phy-cells = <1>; - }; - ehci: usb@12110000 { - compatible = "samsung,exynos4210-ehci"; - reg = <0x12110000 0x100>; - interrupts = <0 71 0>; + ohci: usb@12120000 { + compatible = "samsung,exynos4210-ohci"; + reg = <0x12120000 0x100>; + interrupts = <0 71 0>; - clocks = <&clock CLK_USB2>; - clock-names = "usbhost"; - #address-cells = <1>; - #size-cells = <0>; - port@0 { - reg = <0>; - phys = <&usb2_phy_gen 1>; + clocks = <&clock CLK_USB2>; + clock-names = "usbhost"; + #address-cells = <1>; + #size-cells = <0>; + port@0 { + reg = <0>; + phys = <&usb2_phy_gen 1>; + }; }; - }; - ohci: usb@12120000 { - compatible = "samsung,exynos4210-ohci"; - reg = <0x12120000 0x100>; - interrupts = <0 71 0>; - - clocks = <&clock CLK_USB2>; - clock-names = "usbhost"; - #address-cells = <1>; - #size-cells = <0>; - port@0 { - reg = <0>; - phys = <&usb2_phy_gen 1>; + usb2_phy_gen: phy@12130000 { + compatible = "samsung,exynos5250-usb2-phy"; + reg = <0x12130000 0x100>; + clocks = <&clock CLK_USB2>, <&clock CLK_FIN_PLL>; + clock-names = "phy", "ref"; + #phy-cells = <1>; + samsung,sysreg-phandle = <&sysreg_system_controller>; + samsung,pmureg-phandle = <&pmu_system_controller>; }; - }; - usb2_phy_gen: phy@12130000 { - compatible = "samsung,exynos5250-usb2-phy"; - reg = <0x12130000 0x100>; - clocks = <&clock CLK_USB2>, <&clock CLK_FIN_PLL>; - clock-names = "phy", "ref"; - #phy-cells = <1>; - samsung,sysreg-phandle = <&sysreg_system_controller>; - samsung,pmureg-phandle = <&pmu_system_controller>; - }; + amba { + #address-cells = <1>; + #size-cells = <1>; + compatible = "simple-bus"; + interrupt-parent = <&gic>; + ranges; + + pdma0: pdma@121A0000 { + compatible = "arm,pl330", "arm,primecell"; + reg = <0x121A0000 0x1000>; + interrupts = <0 34 0>; + clocks = <&clock CLK_PDMA0>; + clock-names = "apb_pclk"; + #dma-cells = <1>; + #dma-channels = <8>; + #dma-requests = <32>; + }; + + pdma1: pdma@121B0000 { + compatible = "arm,pl330", "arm,primecell"; + reg = <0x121B0000 0x1000>; + interrupts = <0 35 0>; + clocks = <&clock CLK_PDMA1>; + clock-names = "apb_pclk"; + #dma-cells = <1>; + #dma-channels = <8>; + #dma-requests = <32>; + }; + + mdma0: mdma@10800000 { + compatible = "arm,pl330", "arm,primecell"; + reg = <0x10800000 0x1000>; + interrupts = <0 33 0>; + clocks = <&clock CLK_MDMA0>; + clock-names = "apb_pclk"; + #dma-cells = <1>; + #dma-channels = <8>; + #dma-requests = <1>; + }; + + mdma1: mdma@11C10000 { + compatible = "arm,pl330", "arm,primecell"; + reg = <0x11C10000 0x1000>; + interrupts = <0 124 0>; + clocks = <&clock CLK_MDMA1>; + clock-names = "apb_pclk"; + #dma-cells = <1>; + #dma-channels = <8>; + #dma-requests = <1>; + }; + }; - pwm: pwm@12dd0000 { - compatible = "samsung,exynos4210-pwm"; - reg = <0x12dd0000 0x100>; - samsung,pwm-outputs = <0>, <1>, <2>, <3>; - #pwm-cells = <3>; - clocks = <&clock CLK_PWM>; - clock-names = "timers"; - }; + gsc_0: gsc@13e00000 { + compatible = "samsung,exynos5-gsc"; + reg = <0x13e00000 0x1000>; + interrupts = <0 85 0>; + power-domains = <&pd_gsc>; + clocks = <&clock CLK_GSCL0>; + clock-names = "gscl"; + iommu = <&sysmmu_gsc0>; + }; - amba { - #address-cells = <1>; - #size-cells = <1>; - compatible = "simple-bus"; - interrupt-parent = <&gic>; - ranges; - - pdma0: pdma@121A0000 { - compatible = "arm,pl330", "arm,primecell"; - reg = <0x121A0000 0x1000>; - interrupts = <0 34 0>; - clocks = <&clock CLK_PDMA0>; - clock-names = "apb_pclk"; - #dma-cells = <1>; - #dma-channels = <8>; - #dma-requests = <32>; - }; - - pdma1: pdma@121B0000 { - compatible = "arm,pl330", "arm,primecell"; - reg = <0x121B0000 0x1000>; - interrupts = <0 35 0>; - clocks = <&clock CLK_PDMA1>; - clock-names = "apb_pclk"; - #dma-cells = <1>; - #dma-channels = <8>; - #dma-requests = <32>; - }; - - mdma0: mdma@10800000 { - compatible = "arm,pl330", "arm,primecell"; - reg = <0x10800000 0x1000>; - interrupts = <0 33 0>; - clocks = <&clock CLK_MDMA0>; - clock-names = "apb_pclk"; - #dma-cells = <1>; - #dma-channels = <8>; - #dma-requests = <1>; - }; - - mdma1: mdma@11C10000 { - compatible = "arm,pl330", "arm,primecell"; - reg = <0x11C10000 0x1000>; - interrupts = <0 124 0>; - clocks = <&clock CLK_MDMA1>; - clock-names = "apb_pclk"; - #dma-cells = <1>; - #dma-channels = <8>; - #dma-requests = <1>; + gsc_1: gsc@13e10000 { + compatible = "samsung,exynos5-gsc"; + reg = <0x13e10000 0x1000>; + interrupts = <0 86 0>; + power-domains = <&pd_gsc>; + clocks = <&clock CLK_GSCL1>; + clock-names = "gscl"; + iommu = <&sysmmu_gsc1>; }; - }; - gsc_0: gsc@13e00000 { - compatible = "samsung,exynos5-gsc"; - reg = <0x13e00000 0x1000>; - interrupts = <0 85 0>; - power-domains = <&pd_gsc>; - clocks = <&clock CLK_GSCL0>; - clock-names = "gscl"; - iommu = <&sysmmu_gsc0>; - }; + gsc_2: gsc@13e20000 { + compatible = "samsung,exynos5-gsc"; + reg = <0x13e20000 0x1000>; + interrupts = <0 87 0>; + power-domains = <&pd_gsc>; + clocks = <&clock CLK_GSCL2>; + clock-names = "gscl"; + iommu = <&sysmmu_gsc2>; + }; - gsc_1: gsc@13e10000 { - compatible = "samsung,exynos5-gsc"; - reg = <0x13e10000 0x1000>; - interrupts = <0 86 0>; - power-domains = <&pd_gsc>; - clocks = <&clock CLK_GSCL1>; - clock-names = "gscl"; - iommu = <&sysmmu_gsc1>; - }; + gsc_3: gsc@13e30000 { + compatible = "samsung,exynos5-gsc"; + reg = <0x13e30000 0x1000>; + interrupts = <0 88 0>; + power-domains = <&pd_gsc>; + clocks = <&clock CLK_GSCL3>; + clock-names = "gscl"; + iommu = <&sysmmu_gsc3>; + }; - gsc_2: gsc@13e20000 { - compatible = "samsung,exynos5-gsc"; - reg = <0x13e20000 0x1000>; - interrupts = <0 87 0>; - power-domains = <&pd_gsc>; - clocks = <&clock CLK_GSCL2>; - clock-names = "gscl"; - iommu = <&sysmmu_gsc2>; - }; + hdmi: hdmi@14530000 { + compatible = "samsung,exynos4212-hdmi"; + reg = <0x14530000 0x70000>; + power-domains = <&pd_disp1>; + interrupts = <0 95 0>; + clocks = <&clock CLK_HDMI>, <&clock CLK_SCLK_HDMI>, + <&clock CLK_SCLK_PIXEL>, <&clock CLK_SCLK_HDMIPHY>, + <&clock CLK_MOUT_HDMI>; + clock-names = "hdmi", "sclk_hdmi", "sclk_pixel", + "sclk_hdmiphy", "mout_hdmi"; + samsung,syscon-phandle = <&pmu_system_controller>; + }; - gsc_3: gsc@13e30000 { - compatible = "samsung,exynos5-gsc"; - reg = <0x13e30000 0x1000>; - interrupts = <0 88 0>; - power-domains = <&pd_gsc>; - clocks = <&clock CLK_GSCL3>; - clock-names = "gscl"; - iommu = <&sysmmu_gsc3>; - }; + mixer@14450000 { + compatible = "samsung,exynos5250-mixer"; + reg = <0x14450000 0x10000>; + power-domains = <&pd_disp1>; + interrupts = <0 94 0>; + clocks = <&clock CLK_MIXER>, <&clock CLK_HDMI>, + <&clock CLK_SCLK_HDMI>; + clock-names = "mixer", "hdmi", "sclk_hdmi"; + iommus = <&sysmmu_tv>; + }; - hdmi: hdmi@14530000 { - compatible = "samsung,exynos4212-hdmi"; - reg = <0x14530000 0x70000>; - power-domains = <&pd_disp1>; - interrupts = <0 95 0>; - clocks = <&clock CLK_HDMI>, <&clock CLK_SCLK_HDMI>, - <&clock CLK_SCLK_PIXEL>, <&clock CLK_SCLK_HDMIPHY>, - <&clock CLK_MOUT_HDMI>; - clock-names = "hdmi", "sclk_hdmi", "sclk_pixel", - "sclk_hdmiphy", "mout_hdmi"; - samsung,syscon-phandle = <&pmu_system_controller>; - }; + dp_phy: video-phy { + compatible = "samsung,exynos5250-dp-video-phy"; + samsung,pmu-syscon = <&pmu_system_controller>; + #phy-cells = <0>; + }; - mixer@14450000 { - compatible = "samsung,exynos5250-mixer"; - reg = <0x14450000 0x10000>; - power-domains = <&pd_disp1>; - interrupts = <0 94 0>; - clocks = <&clock CLK_MIXER>, <&clock CLK_HDMI>, - <&clock CLK_SCLK_HDMI>; - clock-names = "mixer", "hdmi", "sclk_hdmi"; - iommus = <&sysmmu_tv>; - }; + adc: adc@12D10000 { + compatible = "samsung,exynos-adc-v1"; + reg = <0x12D10000 0x100>; + interrupts = <0 106 0>; + clocks = <&clock CLK_ADC>; + clock-names = "adc"; + #io-channel-cells = <1>; + io-channel-ranges; + samsung,syscon-phandle = <&pmu_system_controller>; + status = "disabled"; + }; - dp_phy: video-phy { - compatible = "samsung,exynos5250-dp-video-phy"; - samsung,pmu-syscon = <&pmu_system_controller>; - #phy-cells = <0>; - }; + sss@10830000 { + compatible = "samsung,exynos4210-secss"; + reg = <0x10830000 0x300>; + interrupts = <0 112 0>; + clocks = <&clock CLK_SSS>; + clock-names = "secss"; + }; - adc: adc@12D10000 { - compatible = "samsung,exynos-adc-v1"; - reg = <0x12D10000 0x100>; - interrupts = <0 106 0>; - clocks = <&clock CLK_ADC>; - clock-names = "adc"; - #io-channel-cells = <1>; - io-channel-ranges; - samsung,syscon-phandle = <&pmu_system_controller>; - status = "disabled"; - }; + sysmmu_g2d: sysmmu@10A60000 { + compatible = "samsung,exynos-sysmmu"; + reg = <0x10A60000 0x1000>; + interrupt-parent = <&combiner>; + interrupts = <24 5>; + clock-names = "sysmmu", "master"; + clocks = <&clock CLK_SMMU_2D>, <&clock CLK_G2D>; + #iommu-cells = <0>; + }; - sss@10830000 { - compatible = "samsung,exynos4210-secss"; - reg = <0x10830000 0x300>; - interrupts = <0 112 0>; - clocks = <&clock CLK_SSS>; - clock-names = "secss"; - }; + sysmmu_mfc_r: sysmmu@11200000 { + compatible = "samsung,exynos-sysmmu"; + reg = <0x11200000 0x1000>; + interrupt-parent = <&combiner>; + interrupts = <6 2>; + power-domains = <&pd_mfc>; + clock-names = "sysmmu", "master"; + clocks = <&clock CLK_SMMU_MFCR>, <&clock CLK_MFC>; + #iommu-cells = <0>; + }; - sysmmu_g2d: sysmmu@10A60000 { - compatible = "samsung,exynos-sysmmu"; - reg = <0x10A60000 0x1000>; - interrupt-parent = <&combiner>; - interrupts = <24 5>; - clock-names = "sysmmu", "master"; - clocks = <&clock CLK_SMMU_2D>, <&clock CLK_G2D>; - #iommu-cells = <0>; - }; + sysmmu_mfc_l: sysmmu@11210000 { + compatible = "samsung,exynos-sysmmu"; + reg = <0x11210000 0x1000>; + interrupt-parent = <&combiner>; + interrupts = <8 5>; + power-domains = <&pd_mfc>; + clock-names = "sysmmu", "master"; + clocks = <&clock CLK_SMMU_MFCL>, <&clock CLK_MFC>; + #iommu-cells = <0>; + }; - sysmmu_mfc_r: sysmmu@11200000 { - compatible = "samsung,exynos-sysmmu"; - reg = <0x11200000 0x1000>; - interrupt-parent = <&combiner>; - interrupts = <6 2>; - power-domains = <&pd_mfc>; - clock-names = "sysmmu", "master"; - clocks = <&clock CLK_SMMU_MFCR>, <&clock CLK_MFC>; - #iommu-cells = <0>; - }; + sysmmu_rotator: sysmmu@11D40000 { + compatible = "samsung,exynos-sysmmu"; + reg = <0x11D40000 0x1000>; + interrupt-parent = <&combiner>; + interrupts = <4 0>; + clock-names = "sysmmu", "master"; + clocks = <&clock CLK_SMMU_ROTATOR>, <&clock CLK_ROTATOR>; + #iommu-cells = <0>; + }; - sysmmu_mfc_l: sysmmu@11210000 { - compatible = "samsung,exynos-sysmmu"; - reg = <0x11210000 0x1000>; - interrupt-parent = <&combiner>; - interrupts = <8 5>; - power-domains = <&pd_mfc>; - clock-names = "sysmmu", "master"; - clocks = <&clock CLK_SMMU_MFCL>, <&clock CLK_MFC>; - #iommu-cells = <0>; - }; + sysmmu_jpeg: sysmmu@11F20000 { + compatible = "samsung,exynos-sysmmu"; + reg = <0x11F20000 0x1000>; + interrupt-parent = <&combiner>; + interrupts = <4 2>; + power-domains = <&pd_gsc>; + clock-names = "sysmmu", "master"; + clocks = <&clock CLK_SMMU_JPEG>, <&clock CLK_JPEG>; + #iommu-cells = <0>; + }; - sysmmu_rotator: sysmmu@11D40000 { - compatible = "samsung,exynos-sysmmu"; - reg = <0x11D40000 0x1000>; - interrupt-parent = <&combiner>; - interrupts = <4 0>; - clock-names = "sysmmu", "master"; - clocks = <&clock CLK_SMMU_ROTATOR>, <&clock CLK_ROTATOR>; - #iommu-cells = <0>; - }; + sysmmu_fimc_isp: sysmmu@13260000 { + compatible = "samsung,exynos-sysmmu"; + reg = <0x13260000 0x1000>; + interrupt-parent = <&combiner>; + interrupts = <10 6>; + clock-names = "sysmmu"; + clocks = <&clock CLK_SMMU_FIMC_ISP>; + #iommu-cells = <0>; + }; - sysmmu_jpeg: sysmmu@11F20000 { - compatible = "samsung,exynos-sysmmu"; - reg = <0x11F20000 0x1000>; - interrupt-parent = <&combiner>; - interrupts = <4 2>; - power-domains = <&pd_gsc>; - clock-names = "sysmmu", "master"; - clocks = <&clock CLK_SMMU_JPEG>, <&clock CLK_JPEG>; - #iommu-cells = <0>; - }; + sysmmu_fimc_drc: sysmmu@13270000 { + compatible = "samsung,exynos-sysmmu"; + reg = <0x13270000 0x1000>; + interrupt-parent = <&combiner>; + interrupts = <11 6>; + clock-names = "sysmmu"; + clocks = <&clock CLK_SMMU_FIMC_DRC>; + #iommu-cells = <0>; + }; - sysmmu_fimc_isp: sysmmu@13260000 { - compatible = "samsung,exynos-sysmmu"; - reg = <0x13260000 0x1000>; - interrupt-parent = <&combiner>; - interrupts = <10 6>; - clock-names = "sysmmu"; - clocks = <&clock CLK_SMMU_FIMC_ISP>; - #iommu-cells = <0>; - }; + sysmmu_fimc_fd: sysmmu@132A0000 { + compatible = "samsung,exynos-sysmmu"; + reg = <0x132A0000 0x1000>; + interrupt-parent = <&combiner>; + interrupts = <5 0>; + clock-names = "sysmmu"; + clocks = <&clock CLK_SMMU_FIMC_FD>; + #iommu-cells = <0>; + }; - sysmmu_fimc_drc: sysmmu@13270000 { - compatible = "samsung,exynos-sysmmu"; - reg = <0x13270000 0x1000>; - interrupt-parent = <&combiner>; - interrupts = <11 6>; - clock-names = "sysmmu"; - clocks = <&clock CLK_SMMU_FIMC_DRC>; - #iommu-cells = <0>; - }; + sysmmu_fimc_scc: sysmmu@13280000 { + compatible = "samsung,exynos-sysmmu"; + reg = <0x13280000 0x1000>; + interrupt-parent = <&combiner>; + interrupts = <5 2>; + clock-names = "sysmmu"; + clocks = <&clock CLK_SMMU_FIMC_SCC>; + #iommu-cells = <0>; + }; - sysmmu_fimc_fd: sysmmu@132A0000 { - compatible = "samsung,exynos-sysmmu"; - reg = <0x132A0000 0x1000>; - interrupt-parent = <&combiner>; - interrupts = <5 0>; - clock-names = "sysmmu"; - clocks = <&clock CLK_SMMU_FIMC_FD>; - #iommu-cells = <0>; - }; + sysmmu_fimc_scp: sysmmu@13290000 { + compatible = "samsung,exynos-sysmmu"; + reg = <0x13290000 0x1000>; + interrupt-parent = <&combiner>; + interrupts = <3 6>; + clock-names = "sysmmu"; + clocks = <&clock CLK_SMMU_FIMC_SCP>; + #iommu-cells = <0>; + }; - sysmmu_fimc_scc: sysmmu@13280000 { - compatible = "samsung,exynos-sysmmu"; - reg = <0x13280000 0x1000>; - interrupt-parent = <&combiner>; - interrupts = <5 2>; - clock-names = "sysmmu"; - clocks = <&clock CLK_SMMU_FIMC_SCC>; - #iommu-cells = <0>; - }; + sysmmu_fimc_mcuctl: sysmmu@132B0000 { + compatible = "samsung,exynos-sysmmu"; + reg = <0x132B0000 0x1000>; + interrupt-parent = <&combiner>; + interrupts = <5 4>; + clock-names = "sysmmu"; + clocks = <&clock CLK_SMMU_FIMC_MCU>; + #iommu-cells = <0>; + }; - sysmmu_fimc_scp: sysmmu@13290000 { - compatible = "samsung,exynos-sysmmu"; - reg = <0x13290000 0x1000>; - interrupt-parent = <&combiner>; - interrupts = <3 6>; - clock-names = "sysmmu"; - clocks = <&clock CLK_SMMU_FIMC_SCP>; - #iommu-cells = <0>; - }; + sysmmu_fimc_odc: sysmmu@132C0000 { + compatible = "samsung,exynos-sysmmu"; + reg = <0x132C0000 0x1000>; + interrupt-parent = <&combiner>; + interrupts = <11 0>; + clock-names = "sysmmu"; + clocks = <&clock CLK_SMMU_FIMC_ODC>; + #iommu-cells = <0>; + }; - sysmmu_fimc_mcuctl: sysmmu@132B0000 { - compatible = "samsung,exynos-sysmmu"; - reg = <0x132B0000 0x1000>; - interrupt-parent = <&combiner>; - interrupts = <5 4>; - clock-names = "sysmmu"; - clocks = <&clock CLK_SMMU_FIMC_MCU>; - #iommu-cells = <0>; - }; + sysmmu_fimc_dis0: sysmmu@132D0000 { + compatible = "samsung,exynos-sysmmu"; + reg = <0x132D0000 0x1000>; + interrupt-parent = <&combiner>; + interrupts = <10 4>; + clock-names = "sysmmu"; + clocks = <&clock CLK_SMMU_FIMC_DIS0>; + #iommu-cells = <0>; + }; - sysmmu_fimc_odc: sysmmu@132C0000 { - compatible = "samsung,exynos-sysmmu"; - reg = <0x132C0000 0x1000>; - interrupt-parent = <&combiner>; - interrupts = <11 0>; - clock-names = "sysmmu"; - clocks = <&clock CLK_SMMU_FIMC_ODC>; - #iommu-cells = <0>; - }; + sysmmu_fimc_dis1: sysmmu@132E0000{ + compatible = "samsung,exynos-sysmmu"; + reg = <0x132E0000 0x1000>; + interrupt-parent = <&combiner>; + interrupts = <9 4>; + clock-names = "sysmmu"; + clocks = <&clock CLK_SMMU_FIMC_DIS1>; + #iommu-cells = <0>; + }; - sysmmu_fimc_dis0: sysmmu@132D0000 { - compatible = "samsung,exynos-sysmmu"; - reg = <0x132D0000 0x1000>; - interrupt-parent = <&combiner>; - interrupts = <10 4>; - clock-names = "sysmmu"; - clocks = <&clock CLK_SMMU_FIMC_DIS0>; - #iommu-cells = <0>; - }; + sysmmu_fimc_3dnr: sysmmu@132F0000 { + compatible = "samsung,exynos-sysmmu"; + reg = <0x132F0000 0x1000>; + interrupt-parent = <&combiner>; + interrupts = <5 6>; + clock-names = "sysmmu"; + clocks = <&clock CLK_SMMU_FIMC_3DNR>; + #iommu-cells = <0>; + }; - sysmmu_fimc_dis1: sysmmu@132E0000{ - compatible = "samsung,exynos-sysmmu"; - reg = <0x132E0000 0x1000>; - interrupt-parent = <&combiner>; - interrupts = <9 4>; - clock-names = "sysmmu"; - clocks = <&clock CLK_SMMU_FIMC_DIS1>; - #iommu-cells = <0>; - }; + sysmmu_fimc_lite0: sysmmu@13C40000 { + compatible = "samsung,exynos-sysmmu"; + reg = <0x13C40000 0x1000>; + interrupt-parent = <&combiner>; + interrupts = <3 4>; + power-domains = <&pd_gsc>; + clock-names = "sysmmu", "master"; + clocks = <&clock CLK_SMMU_FIMC_LITE0>, <&clock CLK_CAMIF_TOP>; + #iommu-cells = <0>; + }; - sysmmu_fimc_3dnr: sysmmu@132F0000 { - compatible = "samsung,exynos-sysmmu"; - reg = <0x132F0000 0x1000>; - interrupt-parent = <&combiner>; - interrupts = <5 6>; - clock-names = "sysmmu"; - clocks = <&clock CLK_SMMU_FIMC_3DNR>; - #iommu-cells = <0>; - }; + sysmmu_fimc_lite1: sysmmu@13C50000 { + compatible = "samsung,exynos-sysmmu"; + reg = <0x13C50000 0x1000>; + interrupt-parent = <&combiner>; + interrupts = <24 1>; + power-domains = <&pd_gsc>; + clock-names = "sysmmu", "master"; + clocks = <&clock CLK_SMMU_FIMC_LITE1>, <&clock CLK_CAMIF_TOP>; + #iommu-cells = <0>; + }; - sysmmu_fimc_lite0: sysmmu@13C40000 { - compatible = "samsung,exynos-sysmmu"; - reg = <0x13C40000 0x1000>; - interrupt-parent = <&combiner>; - interrupts = <3 4>; - power-domains = <&pd_gsc>; - clock-names = "sysmmu", "master"; - clocks = <&clock CLK_SMMU_FIMC_LITE0>, <&clock CLK_CAMIF_TOP>; - #iommu-cells = <0>; - }; + sysmmu_gsc0: sysmmu@13E80000 { + compatible = "samsung,exynos-sysmmu"; + reg = <0x13E80000 0x1000>; + interrupt-parent = <&combiner>; + interrupts = <2 0>; + power-domains = <&pd_gsc>; + clock-names = "sysmmu", "master"; + clocks = <&clock CLK_SMMU_GSCL0>, <&clock CLK_GSCL0>; + #iommu-cells = <0>; + }; - sysmmu_fimc_lite1: sysmmu@13C50000 { - compatible = "samsung,exynos-sysmmu"; - reg = <0x13C50000 0x1000>; - interrupt-parent = <&combiner>; - interrupts = <24 1>; - power-domains = <&pd_gsc>; - clock-names = "sysmmu", "master"; - clocks = <&clock CLK_SMMU_FIMC_LITE1>, <&clock CLK_CAMIF_TOP>; - #iommu-cells = <0>; - }; + sysmmu_gsc1: sysmmu@13E90000 { + compatible = "samsung,exynos-sysmmu"; + reg = <0x13E90000 0x1000>; + interrupt-parent = <&combiner>; + interrupts = <2 2>; + power-domains = <&pd_gsc>; + clock-names = "sysmmu", "master"; + clocks = <&clock CLK_SMMU_GSCL1>, <&clock CLK_GSCL1>; + #iommu-cells = <0>; + }; - sysmmu_gsc0: sysmmu@13E80000 { - compatible = "samsung,exynos-sysmmu"; - reg = <0x13E80000 0x1000>; - interrupt-parent = <&combiner>; - interrupts = <2 0>; - power-domains = <&pd_gsc>; - clock-names = "sysmmu", "master"; - clocks = <&clock CLK_SMMU_GSCL0>, <&clock CLK_GSCL0>; - #iommu-cells = <0>; - }; + sysmmu_gsc2: sysmmu@13EA0000 { + compatible = "samsung,exynos-sysmmu"; + reg = <0x13EA0000 0x1000>; + interrupt-parent = <&combiner>; + interrupts = <2 4>; + power-domains = <&pd_gsc>; + clock-names = "sysmmu", "master"; + clocks = <&clock CLK_SMMU_GSCL2>, <&clock CLK_GSCL2>; + #iommu-cells = <0>; + }; - sysmmu_gsc1: sysmmu@13E90000 { - compatible = "samsung,exynos-sysmmu"; - reg = <0x13E90000 0x1000>; - interrupt-parent = <&combiner>; - interrupts = <2 2>; - power-domains = <&pd_gsc>; - clock-names = "sysmmu", "master"; - clocks = <&clock CLK_SMMU_GSCL1>, <&clock CLK_GSCL1>; - #iommu-cells = <0>; - }; + sysmmu_gsc3: sysmmu@13EB0000 { + compatible = "samsung,exynos-sysmmu"; + reg = <0x13EB0000 0x1000>; + interrupt-parent = <&combiner>; + interrupts = <2 6>; + power-domains = <&pd_gsc>; + clock-names = "sysmmu", "master"; + clocks = <&clock CLK_SMMU_GSCL3>, <&clock CLK_GSCL3>; + #iommu-cells = <0>; + }; - sysmmu_gsc2: sysmmu@13EA0000 { - compatible = "samsung,exynos-sysmmu"; - reg = <0x13EA0000 0x1000>; - interrupt-parent = <&combiner>; - interrupts = <2 4>; - power-domains = <&pd_gsc>; - clock-names = "sysmmu", "master"; - clocks = <&clock CLK_SMMU_GSCL2>, <&clock CLK_GSCL2>; - #iommu-cells = <0>; - }; + sysmmu_fimd1: sysmmu@14640000 { + compatible = "samsung,exynos-sysmmu"; + reg = <0x14640000 0x1000>; + interrupt-parent = <&combiner>; + interrupts = <3 2>; + power-domains = <&pd_disp1>; + clock-names = "sysmmu", "master"; + clocks = <&clock CLK_SMMU_FIMD1>, <&clock CLK_FIMD1>; + #iommu-cells = <0>; + }; - sysmmu_gsc3: sysmmu@13EB0000 { - compatible = "samsung,exynos-sysmmu"; - reg = <0x13EB0000 0x1000>; - interrupt-parent = <&combiner>; - interrupts = <2 6>; - power-domains = <&pd_gsc>; - clock-names = "sysmmu", "master"; - clocks = <&clock CLK_SMMU_GSCL3>, <&clock CLK_GSCL3>; - #iommu-cells = <0>; + sysmmu_tv: sysmmu@14650000 { + compatible = "samsung,exynos-sysmmu"; + reg = <0x14650000 0x1000>; + interrupt-parent = <&combiner>; + interrupts = <7 4>; + power-domains = <&pd_disp1>; + clock-names = "sysmmu", "master"; + clocks = <&clock CLK_SMMU_TV>, <&clock CLK_MIXER>; + #iommu-cells = <0>; + }; }; - sysmmu_fimd1: sysmmu@14640000 { - compatible = "samsung,exynos-sysmmu"; - reg = <0x14640000 0x1000>; - interrupt-parent = <&combiner>; - interrupts = <3 2>; - power-domains = <&pd_disp1>; - clock-names = "sysmmu", "master"; - clocks = <&clock CLK_SMMU_FIMD1>, <&clock CLK_FIMD1>; - #iommu-cells = <0>; - }; + thermal-zones { + cpu_thermal: cpu-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&tmu 0>; - sysmmu_tv: sysmmu@14650000 { - compatible = "samsung,exynos-sysmmu"; - reg = <0x14650000 0x1000>; - interrupt-parent = <&combiner>; - interrupts = <7 4>; - power-domains = <&pd_disp1>; - clock-names = "sysmmu", "master"; - clocks = <&clock CLK_SMMU_TV>, <&clock CLK_MIXER>; - #iommu-cells = <0>; + cooling-maps { + map0 { + /* Corresponds to 800MHz at freq_table */ + cooling-device = <&cpu0 9 9>; + }; + map1 { + /* Corresponds to 200MHz at freq_table */ + cooling-device = <&cpu0 15 15>; + }; + }; + }; }; }; @@ -1070,6 +1000,39 @@ iommus = <&sysmmu_fimd1>; }; +&i2c_0 { + clocks = <&clock CLK_I2C0>; + clock-names = "i2c"; + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_bus>; +}; + +&i2c_1 { + clocks = <&clock CLK_I2C1>; + clock-names = "i2c"; + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_bus>; +}; + +&i2c_2 { + clocks = <&clock CLK_I2C2>; + clock-names = "i2c"; + pinctrl-names = "default"; + pinctrl-0 = <&i2c2_bus>; +}; + +&i2c_3 { + clocks = <&clock CLK_I2C3>; + clock-names = "i2c"; + pinctrl-names = "default"; + pinctrl-0 = <&i2c3_bus>; +}; + +&pwm { + clocks = <&clock CLK_PWM>; + clock-names = "timers"; +}; + &rtc { clocks = <&clock CLK_RTC>; clock-names = "rtc"; diff --git a/arch/arm/boot/dts/exynos5410-odroidxu.dts b/arch/arm/boot/dts/exynos5410-odroidxu.dts new file mode 100644 index 000000000..f6d135245 --- /dev/null +++ b/arch/arm/boot/dts/exynos5410-odroidxu.dts @@ -0,0 +1,577 @@ +/* + * Hardkernel Odroid XU board device tree source + * + * Copyright (c) 2013 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * Copyright (c) 2016 Krzysztof Kozlowski + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +/dts-v1/; +#include "exynos5410.dtsi" +#include <dt-bindings/clock/maxim,max77802.h> +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/interrupt-controller/irq.h> +#include "exynos54xx-odroidxu-leds.dtsi" + +/ { + model = "Hardkernel Odroid XU"; + compatible = "hardkernel,odroid-xu", "samsung,exynos5410", "samsung,exynos5"; + + memory { + reg = <0x40000000 0x7ea00000>; + }; + + chosen { + linux,stdout-path = &serial_2; + }; + + emmc_pwrseq: pwrseq { + pinctrl-0 = <&emmc_nrst_pin>; + pinctrl-names = "default"; + compatible = "mmc-pwrseq-emmc"; + reset-gpios = <&gpd1 0 GPIO_ACTIVE_LOW>; + }; + + fan0: pwm-fan { + compatible = "pwm-fan"; + pwms = <&pwm 0 20972 0>; + cooling-min-state = <0>; + cooling-max-state = <3>; + #cooling-cells = <2>; + cooling-levels = <0 130 170 230>; + }; + + fin_pll: xxti { + compatible = "fixed-clock"; + clock-frequency = <24000000>; + clock-output-names = "fin_pll"; + #clock-cells = <0>; + }; + + firmware@02073000 { + compatible = "samsung,secure-firmware"; + reg = <0x02073000 0x1000>; + }; +}; + +&cpu0_thermal { + thermal-sensors = <&tmu_cpu0 0>; + polling-delay-passive = <0>; + polling-delay = <0>; + + trips { + cpu_alert0: cpu-alert-0 { + temperature = <50000>; /* millicelsius */ + hysteresis = <5000>; /* millicelsius */ + type = "active"; + }; + cpu_alert1: cpu-alert-1 { + temperature = <60000>; /* millicelsius */ + hysteresis = <5000>; /* millicelsius */ + type = "active"; + }; + cpu_alert2: cpu-alert-2 { + temperature = <70000>; /* millicelsius */ + hysteresis = <5000>; /* millicelsius */ + type = "active"; + }; + cpu_crit0: cpu-crit-0 { + temperature = <120000>; /* millicelsius */ + hysteresis = <0>; /* millicelsius */ + type = "critical"; + }; + }; + + cooling-maps { + map0 { + trip = <&cpu_alert0>; + cooling-device = <&fan0 0 1>; + }; + map1 { + trip = <&cpu_alert1>; + cooling-device = <&fan0 1 2>; + }; + map2 { + trip = <&cpu_alert2>; + cooling-device = <&fan0 2 3>; + }; + }; +}; + +&hsi2c_4 { + samsung,i2c-sda-delay = <100>; + samsung,i2c-max-bus-freq = <400000>; + status = "okay"; + + usb3503: usb-hub@08 { + compatible = "smsc,usb3503"; + reg = <0x08>; + + intn-gpios = <&gpx0 7 GPIO_ACTIVE_HIGH>; + connect-gpios = <&gpx0 6 GPIO_ACTIVE_HIGH>; + reset-gpios = <&gpx1 4 GPIO_ACTIVE_HIGH>; + initial-mode = <1>; + + clock-names = "refclk"; + clocks = <&pmu_system_controller 0>; + refclk-frequency = <24000000>; + }; + + max77802: pmic@09 { + compatible = "maxim,max77802"; + reg = <0x9>; + interrupt-parent = <&gpx0>; + interrupts = <4 IRQ_TYPE_NONE>; + pinctrl-names = "default"; + pinctrl-0 = <&max77802_irq>, <&pmic_dvs_1>, <&pmic_dvs_2>, + <&pmic_dvs_3>; + #clock-cells = <1>; + + inl1-supply = <&buck5_reg>; + inl2-supply = <&buck7_reg>; + inl3-supply = <&buck9_reg>; + inl4-supply = <&buck9_reg>; + inl5-supply = <&buck9_reg>; + inl6-supply = <&buck10_reg>; + inl7-supply = <&buck9_reg>; + /* inl9 supply is BOOST, not configured here */ + inl10-supply = <&buck7_reg>; + + regulators { + buck1_reg: BUCK1 { + regulator-name = "vdd_mif"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1300000>; + regulator-always-on; + regulator-boot-on; + }; + + buck2_reg: BUCK2 { + regulator-name = "vdd_arm"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1500000>; + regulator-always-on; + regulator-boot-on; + }; + + buck3_reg: BUCK3 { + regulator-name = "vdd_int"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1400000>; + regulator-always-on; + regulator-boot-on; + }; + + buck4_reg: BUCK4 { + regulator-name = "vdd_g3d"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1400000>; + regulator-always-on; + regulator-boot-on; + }; + + buck5_reg: BUCK5 { + regulator-name = "vdd_mem"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1500000>; + regulator-always-on; + regulator-boot-on; + }; + + buck6_reg: BUCK6 { + regulator-name = "vdd_kfc"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1500000>; + regulator-always-on; + regulator-boot-on; + }; + + buck7_reg: BUCK7 { + regulator-name = "buck7"; + regulator-min-microvolt = <1300000>; + regulator-max-microvolt = <1300000>; + regulator-always-on; + regulator-boot-on; + }; + + buck8_reg: BUCK8 { + /* vdd_mmc0 */ + regulator-name = "vddf_2v85"; + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2850000>; + regulator-always-on; + regulator-boot-on; + }; + + buck9_reg: BUCK9 { + regulator-name = "buck9"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-always-on; + regulator-boot-on; + }; + + buck10_reg: BUCK10 { + regulator-name = "buck10"; + regulator-min-microvolt = <2950000>; + regulator-max-microvolt = <2950000>; + regulator-always-on; + regulator-boot-on; + }; + + ldo1_reg: LDO1 { + regulator-name = "vdd_alive"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-always-on; + }; + + ldo2_reg: LDO2 { + regulator-name = "vddq_m1_m2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + }; + + ldo3_reg: LDO3 { + regulator-name = "vddq_gpio"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + ldo4_reg: LDO4 { + regulator-name = "vddq_mmc2"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3000000>; + /* Having it off prevents reboot */ + regulator-always-on; + }; + + ldo5_reg: LDO5 { + regulator-name = "vdd18_hsic"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + ldo6_reg: LDO6 { + regulator-name = "vdd18_bpll"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + ldo7_reg: LDO7 { + regulator-name = "vddq_lcd"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + ldo8_reg: LDO8 { + regulator-name = "vdd10_hdmi"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-always-on; + }; + + ldo9_reg: LDO9 { + regulator-name = "ldo9"; + }; + + ldo10_reg: LDO10 { + regulator-name = "vdd18_mipi"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + ldo11_reg: LDO11 { + regulator-name = "vddq_mmc01"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + /* + * Having it off prevents accessing MMC after + * reboot with error: + * MMC Device 1: Clock OFF has been failed. + */ + regulator-always-on; + }; + + ldo12_reg: LDO12 { + regulator-name = "vdd33_usb3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + ldo13_reg: LDO13 { + regulator-name = "vddq_abbg0"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + ldo14_reg: LDO14 { + regulator-name = "vddq_abbg1"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + ldo15_reg: LDO15 { + regulator-name = "vdd10_usb3"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-always-on; + }; + + ldo16_reg: LDO16 { + regulator-name = "ldo16"; + }; + + ldo17_reg: LDO17 { + regulator-name = "cam_sensor_core"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + ldo18_reg: LDO18 { + regulator-name = "ldo18"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + ldo19_reg: LDO19 { + regulator-name = "ldo19"; + }; + + ldo20_reg: LDO20 { + regulator-name = "vdd_mmc0"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + ldo21_reg: LDO21 { + /* vdd_mmc2 */ + regulator-name = "vddf_2v8"; + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2850000>; + }; + + ldo22_reg: LDO22 { + regulator-name = "ldo22"; + }; + + ldo23_reg: LDO23 { + regulator-name = "dp_p3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + ldo24_reg: LDO24 { + regulator-name = "cam_af"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + }; + + ldo25_reg: LDO25 { + regulator-name = "eth_p3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + ldo26_reg: LDO26 { + regulator-name = "usb30_extclk"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + ldo27_reg: LDO27 { + regulator-name = "ldo27"; + }; + + ldo28_reg: LDO28 { + regulator-name = "ldo28"; + }; + + ldo29_reg: LDO29 { + regulator-name = "ldo29"; + }; + + ldo30_reg: LDO30 { + regulator-name = "vddq_e1_e2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + }; + + ldo31_reg: LDO31 { + regulator-name = "ldo31"; + }; + + /* On revisions with ti,ina231 this is sensor VS */ + ldo32_reg: LDO32 { + regulator-name = "vs_power_meter"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + ldo33_reg: LDO33 { + regulator-name = "ldo33"; + }; + + ldo34_reg: LDO34 { + regulator-name = "ldo34"; + }; + + ldo35_reg: LDO35 { + regulator-name = "ldo35"; + }; + }; + }; +}; + +&mmc_0 { + status = "okay"; + mmc-pwrseq = <&emmc_pwrseq>; + cd-gpios = <&gpc0 2 GPIO_ACTIVE_LOW>; + card-detect-delay = <200>; + samsung,dw-mshc-ciu-div = <3>; + samsung,dw-mshc-sdr-timing = <0 4>; + samsung,dw-mshc-ddr-timing = <0 2>; + pinctrl-names = "default"; + pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus1 &sd0_bus4 &sd0_bus8 &sd0_cd>; + bus-width = <8>; + cap-mmc-highspeed; + mmc-hs200-1_8v; + vmmc-supply = <&ldo20_reg>; + vqmmc-supply = <&ldo11_reg>; +}; + +&mmc_2 { + status = "okay"; + card-detect-delay = <200>; + samsung,dw-mshc-ciu-div = <3>; + samsung,dw-mshc-sdr-timing = <0 4>; + samsung,dw-mshc-ddr-timing = <0 2>; + pinctrl-names = "default"; + pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus1 &sd2_bus4>; + bus-width = <4>; + cap-sd-highspeed; + vmmc-supply = <&ldo21_reg>; + vqmmc-supply = <&ldo4_reg>; +}; + +&pinctrl_0 { + emmc_nrst_pin: emmc-nrst { + samsung,pins = "gpd1-0"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + pmic_dvs_3: pmic-dvs-3 { + samsung,pins = "gpx0-0"; + samsung,pin-function = <1>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + pmic_dvs_2: pmic-dvs-2 { + samsung,pins = "gpx0-1"; + samsung,pin-function = <1>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + pmic_dvs_1: pmic-dvs-1 { + samsung,pins = "gpx0-2"; + samsung,pin-function = <1>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + samsung,pin-val = <1>; + }; + + max77802_irq: max77802-irq { + samsung,pins = "gpx0-4"; + samsung,pin-function = <0xf>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; +}; + +&pwm { + /* + * PWM 0 -- fan + * PWM 1 -- Green LED + * PWM 2 -- Blue LED + * PWM 3 -- on MIPI connector for backlight + */ + pinctrl-0 = <&pwm0_out &pwm1_out &pwm2_out &pwm3_out>; + pinctrl-names = "default"; + status = "okay"; +}; + +&rtc { + status = "okay"; + clocks = <&clock CLK_RTC>, <&max77802 MAX77802_CLK_32K_AP>; + clock-names = "rtc", "rtc_src"; +}; + +&serial_0 { + status = "okay"; +}; + +&serial_1 { + status = "okay"; +}; + +&serial_2 { + status = "okay"; +}; + +&serial_3 { + status = "okay"; +}; + +&tmu_cpu0 { + vtmu-supply = <&ldo10_reg>; +}; + +&tmu_cpu1 { + vtmu-supply = <&ldo10_reg>; +}; + +&tmu_cpu2 { + vtmu-supply = <&ldo10_reg>; +}; + +&tmu_cpu3 { + vtmu-supply = <&ldo10_reg>; +}; + +&usbdrd_dwc3_0 { + dr_mode = "host"; +}; + +&usbdrd_dwc3_1 { + dr_mode = "peripheral"; +}; + +&usbdrd3_0 { + vdd33-supply = <&ldo12_reg>; + vdd10-supply = <&ldo15_reg>; +}; + +&usbdrd3_1 { + vdd33-supply = <&ldo12_reg>; + vdd10-supply = <&ldo15_reg>; +}; diff --git a/arch/arm/boot/dts/exynos5410-pinctrl.dtsi b/arch/arm/boot/dts/exynos5410-pinctrl.dtsi index f9aa6bb55..b58a0f29f 100644 --- a/arch/arm/boot/dts/exynos5410-pinctrl.dtsi +++ b/arch/arm/boot/dts/exynos5410-pinctrl.dtsi @@ -277,6 +277,216 @@ interrupt-controller; #interrupt-cells = <2>; }; + + uart0_data: uart0-data { + samsung,pins = "gpa0-0", "gpa0-1"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + uart0_fctl: uart0-fctl { + samsung,pins = "gpa0-2", "gpa0-3"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + uart1_data: uart1-data { + samsung,pins = "gpa0-4", "gpa0-5"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + uart1_fctl: uart1-fctl { + samsung,pins = "gpa0-6", "gpa0-7"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + i2c2_bus: i2c2-bus { + samsung,pins = "gpa0-6", "gpa0-7"; + samsung,pin-function = <3>; + samsung,pin-pud = <3>; + samsung,pin-drv = <0>; + }; + + uart2_data: uart2-data { + samsung,pins = "gpa1-0", "gpa1-1"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + uart2_fctl: uart2-fctl { + samsung,pins = "gpa1-2", "gpa1-3"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + i2c3_bus: i2c3-bus { + samsung,pins = "gpa1-2", "gpa1-3"; + samsung,pin-function = <3>; + samsung,pin-pud = <3>; + samsung,pin-drv = <0>; + }; + + uart3_data: uart3-data { + samsung,pins = "gpa1-4", "gpa1-5"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + i2c4_hs_bus: i2c4-hs-bus { + samsung,pins = "gpa2-0", "gpa2-1"; + samsung,pin-function = <3>; + samsung,pin-pud = <3>; + samsung,pin-drv = <0>; + }; + + i2c5_hs_bus: i2c5-hs-bus { + samsung,pins = "gpa2-2", "gpa2-3"; + samsung,pin-function = <3>; + samsung,pin-pud = <3>; + samsung,pin-drv = <0>; + }; + + i2c6_hs_bus: i2c6-hs-bus { + samsung,pins = "gpb1-3", "gpb1-4"; + samsung,pin-function = <4>; + samsung,pin-pud = <3>; + samsung,pin-drv = <0>; + }; + + pwm0_out: pwm0-out { + samsung,pins = "gpb2-0"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + pwm1_out: pwm1-out { + samsung,pins = "gpb2-1"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + pwm2_out: pwm2-out { + samsung,pins = "gpb2-2"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + pwm3_out: pwm3-out { + samsung,pins = "gpb2-3"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + i2c7_hs_bus: i2c7-hs-bus { + samsung,pins = "gpb2-2", "gpb2-3"; + samsung,pin-function = <3>; + samsung,pin-pud = <3>; + samsung,pin-drv = <0>; + }; + + i2c0_bus: i2c0-bus { + samsung,pins = "gpb3-0", "gpb3-1"; + samsung,pin-function = <2>; + samsung,pin-pud = <3>; + samsung,pin-drv = <0>; + }; + + i2c1_bus: i2c1-bus { + samsung,pins = "gpb3-2", "gpb3-3"; + samsung,pin-function = <2>; + samsung,pin-pud = <3>; + samsung,pin-drv = <0>; + }; + + sd0_clk: sd0-clk { + samsung,pins = "gpc0-0"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <3>; + }; + + sd0_cmd: sd0-cmd { + samsung,pins = "gpc0-1"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <3>; + }; + + sd0_cd: sd0-cd { + samsung,pins = "gpc0-2"; + samsung,pin-function = <2>; + samsung,pin-pud = <3>; + samsung,pin-drv = <3>; + }; + + sd0_bus1: sd0-bus-width1 { + samsung,pins = "gpc0-3"; + samsung,pin-function = <2>; + samsung,pin-pud = <3>; + samsung,pin-drv = <3>; + }; + + sd0_bus4: sd0-bus-width4 { + samsung,pins = "gpc0-4", "gpc0-5", "gpc0-6"; + samsung,pin-function = <2>; + samsung,pin-pud = <3>; + samsung,pin-drv = <3>; + }; + + sd2_clk: sd2-clk { + samsung,pins = "gpc2-0"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <3>; + }; + + sd2_cmd: sd2-cmd { + samsung,pins = "gpc2-1"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <3>; + }; + + sd2_cd: sd2-cd { + samsung,pins = "gpc2-2"; + samsung,pin-function = <2>; + samsung,pin-pud = <3>; + samsung,pin-drv = <3>; + }; + + sd2_bus1: sd2-bus-width1 { + samsung,pins = "gpc2-3"; + samsung,pin-function = <2>; + samsung,pin-pud = <3>; + samsung,pin-drv = <3>; + }; + + sd2_bus4: sd2-bus-width4 { + samsung,pins = "gpc2-4", "gpc2-5", "gpc2-6"; + samsung,pin-function = <2>; + samsung,pin-pud = <3>; + samsung,pin-drv = <3>; + }; + + sd0_bus8: sd0-bus-width8 { + samsung,pins = "gpc3-0", "gpc3-1", "gpc3-2", "gpc3-3"; + samsung,pin-function = <2>; + samsung,pin-pud = <3>; + samsung,pin-drv = <3>; + }; }; &pinctrl_1 { diff --git a/arch/arm/boot/dts/exynos5410-smdk5410.dts b/arch/arm/boot/dts/exynos5410-smdk5410.dts index 0f6429e1b..777fcf2ed 100644 --- a/arch/arm/boot/dts/exynos5410-smdk5410.dts +++ b/arch/arm/boot/dts/exynos5410-smdk5410.dts @@ -102,14 +102,14 @@ }; }; -&uart0 { +&serial_0 { status = "okay"; }; -&uart1 { +&serial_1 { status = "okay"; }; -&uart2 { +&serial_2 { status = "okay"; }; diff --git a/arch/arm/boot/dts/exynos5410.dtsi b/arch/arm/boot/dts/exynos5410.dtsi index 7a56aec2c..137f48464 100644 --- a/arch/arm/boot/dts/exynos5410.dtsi +++ b/arch/arm/boot/dts/exynos5410.dtsi @@ -13,9 +13,10 @@ * published by the Free Software Foundation. */ -#include "skeleton.dtsi" +#include "exynos54xx.dtsi" #include "exynos-syscon-restart.dtsi" #include <dt-bindings/clock/exynos5410.h> +#include <dt-bindings/interrupt-controller/arm-gic.h> / { compatible = "samsung,exynos5410", "samsung,exynos5"; @@ -26,37 +27,34 @@ pinctrl1 = &pinctrl_1; pinctrl2 = &pinctrl_2; pinctrl3 = &pinctrl_3; - serial0 = &uart0; - serial1 = &uart1; - serial2 = &uart2; }; cpus { #address-cells = <1>; #size-cells = <0>; - CPU0: cpu@0 { + cpu0: cpu@0 { device_type = "cpu"; compatible = "arm,cortex-a15"; reg = <0x0>; clock-frequency = <1600000000>; }; - CPU1: cpu@1 { + cpu1: cpu@1 { device_type = "cpu"; compatible = "arm,cortex-a15"; reg = <0x1>; clock-frequency = <1600000000>; }; - CPU2: cpu@2 { + cpu2: cpu@2 { device_type = "cpu"; compatible = "arm,cortex-a15"; reg = <0x2>; clock-frequency = <1600000000>; }; - CPU3: cpu@3 { + cpu3: cpu@3 { device_type = "cpu"; compatible = "arm,cortex-a15"; reg = <0x3>; @@ -70,105 +68,54 @@ #size-cells = <1>; ranges; - combiner: interrupt-controller@10440000 { - compatible = "samsung,exynos4210-combiner"; - #interrupt-cells = <2>; - interrupt-controller; - samsung,combiner-nr = <32>; - reg = <0x10440000 0x1000>; - interrupts = <0 0 0>, <0 1 0>, <0 2 0>, <0 3 0>, - <0 4 0>, <0 5 0>, <0 6 0>, <0 7 0>, - <0 8 0>, <0 9 0>, <0 10 0>, <0 11 0>, - <0 12 0>, <0 13 0>, <0 14 0>, <0 15 0>, - <0 16 0>, <0 17 0>, <0 18 0>, <0 19 0>, - <0 20 0>, <0 21 0>, <0 22 0>, <0 23 0>, - <0 24 0>, <0 25 0>, <0 26 0>, <0 27 0>, - <0 28 0>, <0 29 0>, <0 30 0>, <0 31 0>; - }; - - gic: interrupt-controller@10481000 { - compatible = "arm,cortex-a15-gic", "arm,cortex-a9-gic"; - #interrupt-cells = <3>; - interrupt-controller; - reg = <0x10481000 0x1000>, - <0x10482000 0x1000>, - <0x10484000 0x2000>, - <0x10486000 0x2000>; - interrupts = <1 9 0xf04>; - }; - - chipid@10000000 { - compatible = "samsung,exynos4210-chipid"; - reg = <0x10000000 0x100>; - }; - - sromc: memory-controller@12250000 { - compatible = "samsung,exynos4210-srom"; - reg = <0x12250000 0x14>; - #address-cells = <2>; - #size-cells = <1>; - ranges = <0 0 0x04000000 0x20000 - 1 0 0x05000000 0x20000 - 2 0 0x06000000 0x20000 - 3 0 0x07000000 0x20000>; - }; - pmu_system_controller: system-controller@10040000 { compatible = "samsung,exynos5410-pmu", "syscon"; reg = <0x10040000 0x5000>; + clock-names = "clkout16"; + clocks = <&fin_pll>; + #clock-cells = <1>; }; - mct: mct@101C0000 { - compatible = "samsung,exynos4210-mct"; - reg = <0x101C0000 0xB00>; - interrupt-parent = <&interrupt_map>; - interrupts = <0>, <1>, <2>, <3>, - <4>, <5>, <6>, <7>, - <8>, <9>, <10>, <11>; - clocks = <&fin_pll>, <&clock CLK_MCT>; - clock-names = "fin_pll", "mct"; - - interrupt_map: interrupt-map { - #interrupt-cells = <1>; - #address-cells = <0>; - #size-cells = <0>; - interrupt-map = <0 &combiner 23 3>, - <1 &combiner 23 4>, - <2 &combiner 25 2>, - <3 &combiner 25 3>, - <4 &gic 0 120 0>, - <5 &gic 0 121 0>, - <6 &gic 0 122 0>, - <7 &gic 0 123 0>, - <8 &gic 0 128 0>, - <9 &gic 0 129 0>, - <10 &gic 0 130 0>, - <11 &gic 0 131 0>; - }; + clock: clock-controller@10010000 { + compatible = "samsung,exynos5410-clock"; + reg = <0x10010000 0x30000>; + #clock-cells = <1>; }; - sysram@02020000 { - compatible = "mmio-sram"; - reg = <0x02020000 0x54000>; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0 0x02020000 0x54000>; + tmu_cpu0: tmu@10060000 { + compatible = "samsung,exynos5420-tmu"; + reg = <0x10060000 0x100>; + interrupts = <GIC_SPI 65 0>; + clocks = <&clock CLK_TMU>; + clock-names = "tmu_apbif"; + #include "exynos4412-tmu-sensor-conf.dtsi" + }; - smp-sysram@0 { - compatible = "samsung,exynos4210-sysram"; - reg = <0x0 0x1000>; - }; + tmu_cpu1: tmu@10064000 { + compatible = "samsung,exynos5420-tmu"; + reg = <0x10064000 0x100>; + interrupts = <GIC_SPI 183 0>; + clocks = <&clock CLK_TMU>; + clock-names = "tmu_apbif"; + #include "exynos4412-tmu-sensor-conf.dtsi" + }; - smp-sysram@53000 { - compatible = "samsung,exynos4210-sysram-ns"; - reg = <0x53000 0x1000>; - }; + tmu_cpu2: tmu@10068000 { + compatible = "samsung,exynos5420-tmu"; + reg = <0x10068000 0x100>; + interrupts = <GIC_SPI 184 0>; + clocks = <&clock CLK_TMU>; + clock-names = "tmu_apbif"; + #include "exynos4412-tmu-sensor-conf.dtsi" }; - clock: clock-controller@10010000 { - compatible = "samsung,exynos5410-clock"; - reg = <0x10010000 0x30000>; - #clock-cells = <1>; + tmu_cpu3: tmu@1006c000 { + compatible = "samsung,exynos5420-tmu"; + reg = <0x1006c000 0x100>; + interrupts = <GIC_SPI 185 0>; + clocks = <&clock CLK_TMU>; + clock-names = "tmu_apbif"; + #include "exynos4412-tmu-sensor-conf.dtsi" }; mmc_0: mmc@12200000 { @@ -236,34 +183,182 @@ reg = <0x03860000 0x1000>; interrupts = <0 47 0>; }; + }; - uart0: serial@12C00000 { - compatible = "samsung,exynos4210-uart"; - reg = <0x12C00000 0x100>; - interrupts = <0 51 0>; - clocks = <&clock CLK_UART0>, <&clock CLK_SCLK_UART0>; - clock-names = "uart", "clk_uart_baud0"; - status = "disabled"; + thermal-zones { + cpu0_thermal: cpu0-thermal { + thermal-sensors = <&tmu_cpu0>; + #include "exynos5420-trip-points.dtsi" }; - - uart1: serial@12C10000 { - compatible = "samsung,exynos4210-uart"; - reg = <0x12C10000 0x100>; - interrupts = <0 52 0>; - clocks = <&clock CLK_UART1>, <&clock CLK_SCLK_UART1>; - clock-names = "uart", "clk_uart_baud0"; - status = "disabled"; + cpu1_thermal: cpu1-thermal { + thermal-sensors = <&tmu_cpu1>; + #include "exynos5420-trip-points.dtsi" }; - - uart2: serial@12C20000 { - compatible = "samsung,exynos4210-uart"; - reg = <0x12C20000 0x100>; - interrupts = <0 53 0>; - clocks = <&clock CLK_UART2>, <&clock CLK_SCLK_UART2>; - clock-names = "uart", "clk_uart_baud0"; - status = "disabled"; + cpu2_thermal: cpu2-thermal { + thermal-sensors = <&tmu_cpu2>; + #include "exynos5420-trip-points.dtsi" + }; + cpu3_thermal: cpu3-thermal { + thermal-sensors = <&tmu_cpu3>; + #include "exynos5420-trip-points.dtsi" }; }; }; +&i2c_0 { + clocks = <&clock CLK_I2C0>; + clock-names = "i2c"; + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_bus>; +}; + +&i2c_1 { + clocks = <&clock CLK_I2C1>; + clock-names = "i2c"; + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_bus>; +}; + +&i2c_2 { + clocks = <&clock CLK_I2C2>; + clock-names = "i2c"; + pinctrl-names = "default"; + pinctrl-0 = <&i2c2_bus>; +}; + +&i2c_3 { + clocks = <&clock CLK_I2C3>; + clock-names = "i2c"; + pinctrl-names = "default"; + pinctrl-0 = <&i2c3_bus>; +}; + +&hsi2c_4 { + clocks = <&clock CLK_USI0>; + clock-names = "hsi2c"; + pinctrl-names = "default"; + pinctrl-0 = <&i2c4_hs_bus>; +}; + +&hsi2c_5 { + clocks = <&clock CLK_USI1>; + clock-names = "hsi2c"; + pinctrl-names = "default"; + pinctrl-0 = <&i2c5_hs_bus>; +}; + +&hsi2c_6 { + clocks = <&clock CLK_USI2>; + clock-names = "hsi2c"; + pinctrl-names = "default"; + pinctrl-0 = <&i2c6_hs_bus>; +}; + +&hsi2c_7 { + clocks = <&clock CLK_USI3>; + clock-names = "hsi2c"; + pinctrl-names = "default"; + pinctrl-0 = <&i2c7_hs_bus>; +}; + +&mct { + clocks = <&fin_pll>, <&clock CLK_MCT>; + clock-names = "fin_pll", "mct"; +}; + +&pwm { + clocks = <&clock CLK_PWM>; + clock-names = "timers"; +}; + +&rtc { + clocks = <&clock CLK_RTC>; + clock-names = "rtc"; + interrupt-parent = <&pmu_system_controller>; + status = "disabled"; +}; + +&serial_0 { + clocks = <&clock CLK_UART0>, <&clock CLK_SCLK_UART0>; + clock-names = "uart", "clk_uart_baud0"; +}; + +&serial_1 { + clocks = <&clock CLK_UART1>, <&clock CLK_SCLK_UART1>; + clock-names = "uart", "clk_uart_baud0"; +}; + +&serial_2 { + clocks = <&clock CLK_UART2>, <&clock CLK_SCLK_UART2>; + clock-names = "uart", "clk_uart_baud0"; +}; + +&serial_3 { + clocks = <&clock CLK_UART3>, <&clock CLK_SCLK_UART3>; + clock-names = "uart", "clk_uart_baud0"; +}; + +&sss { + clocks = <&clock CLK_SSS>; + clock-names = "secss"; +}; + +&sromc { + #address-cells = <2>; + #size-cells = <1>; + ranges = <0 0 0x04000000 0x20000 + 1 0 0x05000000 0x20000 + 2 0 0x06000000 0x20000 + 3 0 0x07000000 0x20000>; +}; + +&usbdrd3_0 { + clocks = <&clock CLK_USBD300>; + clock-names = "usbdrd30"; +}; + +&usbdrd_phy0 { + clocks = <&clock CLK_USBD300>, <&clock CLK_SCLK_USBPHY300>; + clock-names = "phy", "ref"; + samsung,pmu-syscon = <&pmu_system_controller>; +}; + +&usbdrd3_1 { + clocks = <&clock CLK_USBD301>; + clock-names = "usbdrd30"; +}; + +&usbdrd_dwc3_1 { + interrupts = <GIC_SPI 200 0>; +}; + +&usbdrd_phy1 { + clocks = <&clock CLK_USBD301>, <&clock CLK_SCLK_USBPHY301>; + clock-names = "phy", "ref"; + samsung,pmu-syscon = <&pmu_system_controller>; +}; + +&usbhost1 { + clocks = <&clock CLK_USBH20>; + clock-names = "usbhost"; +}; + +&usbhost2 { + clocks = <&clock CLK_USBH20>; + clock-names = "usbhost"; +}; + +&usb2_phy { + clocks = <&clock CLK_USBH20>, <&clock CLK_SCLK_USBPHY300>; + clock-names = "phy", "ref"; + samsung,sysreg-phandle = <&sysreg_system_controller>; + samsung,pmureg-phandle = <&pmu_system_controller>; +}; + +&watchdog { + clocks = <&clock CLK_WDT>; + clock-names = "watchdog"; + samsung,syscon-phandle = <&pmu_system_controller>; +}; + #include "exynos5410-pinctrl.dtsi" diff --git a/arch/arm/boot/dts/exynos5420-arndale-octa.dts b/arch/arm/boot/dts/exynos5420-arndale-octa.dts index 60bc861d0..39a3b8147 100644 --- a/arch/arm/boot/dts/exynos5420-arndale-octa.dts +++ b/arch/arm/boot/dts/exynos5420-arndale-octa.dts @@ -16,6 +16,7 @@ #include <dt-bindings/interrupt-controller/irq.h> #include <dt-bindings/input/input.h> #include <dt-bindings/clock/samsung,s2mps11.h> +#include "exynos-mfc-reserved-memory.dtsi" / { model = "Insignal Arndale Octa evaluation board based on EXYNOS5420"; @@ -346,11 +347,6 @@ }; }; -&mfc { - samsung,mfc-r = <0x43000000 0x800000>; - samsung,mfc-l = <0x51000000 0x800000>; -}; - &mmc_0 { status = "okay"; broken-cd; diff --git a/arch/arm/boot/dts/exynos5420-peach-pit.dts b/arch/arm/boot/dts/exynos5420-peach-pit.dts index 1de972d46..fe4e0915c 100644 --- a/arch/arm/boot/dts/exynos5420-peach-pit.dts +++ b/arch/arm/boot/dts/exynos5420-peach-pit.dts @@ -16,6 +16,7 @@ #include <dt-bindings/regulator/maxim,max77802.h> #include "exynos5420.dtsi" #include "exynos5420-cpus.dtsi" +#include "exynos-mfc-reserved-memory.dtsi" / { model = "Google Peach Pit Rev 6+"; @@ -278,7 +279,6 @@ regulator-name = "vdd_1v2"; regulator-min-microvolt = <1200000>; regulator-max-microvolt = <1200000>; - regulator-always-on; regulator-boot-on; regulator-state-mem { regulator-off-in-suspend; @@ -301,7 +301,6 @@ regulator-name = "vdd_1v35"; regulator-min-microvolt = <1350000>; regulator-max-microvolt = <1350000>; - regulator-always-on; regulator-boot-on; regulator-state-mem { regulator-on-in-suspend; @@ -323,7 +322,6 @@ regulator-name = "vdd_2v"; regulator-min-microvolt = <2000000>; regulator-max-microvolt = <2000000>; - regulator-always-on; regulator-boot-on; regulator-state-mem { regulator-on-in-suspend; @@ -334,7 +332,6 @@ regulator-name = "vdd_1v8"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; - regulator-always-on; regulator-boot-on; regulator-state-mem { regulator-on-in-suspend; @@ -419,7 +416,6 @@ regulator-name = "vdd_ldo9"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; - regulator-always-on; regulator-state-mem { regulator-on-in-suspend; regulator-mode = <MAX77802_OPMODE_LP>; @@ -430,7 +426,6 @@ regulator-name = "vdd_ldo10"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; - regulator-always-on; regulator-state-mem { regulator-off-in-suspend; }; @@ -701,11 +696,6 @@ status = "okay"; }; -&mfc { - samsung,mfc-r = <0x43000000 0x800000>; - samsung,mfc-l = <0x51000000 0x800000>; -}; - &mmc_0 { status = "okay"; num-slots = <1>; @@ -1053,6 +1043,26 @@ status = "okay"; }; +&tmu_cpu0 { + vtmu-supply = <&ldo10_reg>; +}; + +&tmu_cpu1 { + vtmu-supply = <&ldo10_reg>; +}; + +&tmu_cpu2 { + vtmu-supply = <&ldo10_reg>; +}; + +&tmu_cpu3 { + vtmu-supply = <&ldo10_reg>; +}; + +&tmu_gpu { + vtmu-supply = <&ldo10_reg>; +}; + &usbdrd_dwc3_0 { dr_mode = "host"; }; diff --git a/arch/arm/boot/dts/exynos5420-pinctrl.dtsi b/arch/arm/boot/dts/exynos5420-pinctrl.dtsi index 130563b2c..14beb7e07 100644 --- a/arch/arm/boot/dts/exynos5420-pinctrl.dtsi +++ b/arch/arm/boot/dts/exynos5420-pinctrl.dtsi @@ -193,17 +193,17 @@ samsung,pin-drv = <3>; }; - sd1_clk: sd1-clk { - samsung,pins = "gpc1-0"; + sd0_rclk: sd0-rclk { + samsung,pins = "gpc0-7"; samsung,pin-function = <2>; - samsung,pin-pud = <0>; + samsung,pin-pud = <1>; samsung,pin-drv = <3>; }; - sd0_rclk: sd0-rclk { - samsung,pins = "gpc0-7"; + sd1_clk: sd1-clk { + samsung,pins = "gpc1-0"; samsung,pin-function = <2>; - samsung,pin-pud = <1>; + samsung,pin-pud = <0>; samsung,pin-drv = <3>; }; diff --git a/arch/arm/boot/dts/exynos5420-smdk5420.dts b/arch/arm/boot/dts/exynos5420-smdk5420.dts index 2e748d193..ed8f34269 100644 --- a/arch/arm/boot/dts/exynos5420-smdk5420.dts +++ b/arch/arm/boot/dts/exynos5420-smdk5420.dts @@ -13,6 +13,7 @@ #include "exynos5420.dtsi" #include "exynos5420-cpus.dtsi" #include <dt-bindings/gpio/gpio.h> +#include "exynos-mfc-reserved-memory.dtsi" / { model = "Samsung SMDK5420 board based on EXYNOS5420"; @@ -354,11 +355,6 @@ }; }; -&mfc { - samsung,mfc-r = <0x43000000 0x800000>; - samsung,mfc-l = <0x51000000 0x800000>; -}; - &mmc_0 { status = "okay"; broken-cd; diff --git a/arch/arm/boot/dts/exynos5420.dtsi b/arch/arm/boot/dts/exynos5420.dtsi index c6e05eb88..00c4cfa54 100644 --- a/arch/arm/boot/dts/exynos5420.dtsi +++ b/arch/arm/boot/dts/exynos5420.dtsi @@ -13,10 +13,10 @@ * published by the Free Software Foundation. */ +#include "exynos54xx.dtsi" #include <dt-bindings/clock/exynos5420.h> -#include "exynos5.dtsi" - #include <dt-bindings/clock/exynos-audss-clk.h> +#include <dt-bindings/interrupt-controller/arm-gic.h> / { compatible = "samsung,exynos5420", "samsung,exynos5"; @@ -30,14 +30,6 @@ pinctrl2 = &pinctrl_2; pinctrl3 = &pinctrl_3; pinctrl4 = &pinctrl_4; - i2c0 = &i2c_0; - i2c1 = &i2c_1; - i2c2 = &i2c_2; - i2c3 = &i2c_3; - i2c4 = &hsi2c_4; - i2c5 = &hsi2c_5; - i2c6 = &hsi2c_6; - i2c7 = &hsi2c_7; i2c8 = &hsi2c_8; i2c9 = &hsi2c_9; i2c10 = &hsi2c_10; @@ -46,118 +38,6 @@ spi0 = &spi_0; spi1 = &spi_1; spi2 = &spi_2; - usbdrdphy0 = &usbdrd_phy0; - usbdrdphy1 = &usbdrd_phy1; - }; - - cluster_a15_opp_table: opp_table0 { - compatible = "operating-points-v2"; - opp-shared; - opp@1800000000 { - opp-hz = /bits/ 64 <1800000000>; - opp-microvolt = <1250000>; - clock-latency-ns = <140000>; - }; - opp@1700000000 { - opp-hz = /bits/ 64 <1700000000>; - opp-microvolt = <1212500>; - clock-latency-ns = <140000>; - }; - opp@1600000000 { - opp-hz = /bits/ 64 <1600000000>; - opp-microvolt = <1175000>; - clock-latency-ns = <140000>; - }; - opp@1500000000 { - opp-hz = /bits/ 64 <1500000000>; - opp-microvolt = <1137500>; - clock-latency-ns = <140000>; - }; - opp@1400000000 { - opp-hz = /bits/ 64 <1400000000>; - opp-microvolt = <1112500>; - clock-latency-ns = <140000>; - }; - opp@1300000000 { - opp-hz = /bits/ 64 <1300000000>; - opp-microvolt = <1062500>; - clock-latency-ns = <140000>; - }; - opp@1200000000 { - opp-hz = /bits/ 64 <1200000000>; - opp-microvolt = <1037500>; - clock-latency-ns = <140000>; - }; - opp@1100000000 { - opp-hz = /bits/ 64 <1100000000>; - opp-microvolt = <1012500>; - clock-latency-ns = <140000>; - }; - opp@1000000000 { - opp-hz = /bits/ 64 <1000000000>; - opp-microvolt = < 987500>; - clock-latency-ns = <140000>; - }; - opp@900000000 { - opp-hz = /bits/ 64 <900000000>; - opp-microvolt = < 962500>; - clock-latency-ns = <140000>; - }; - opp@800000000 { - opp-hz = /bits/ 64 <800000000>; - opp-microvolt = < 937500>; - clock-latency-ns = <140000>; - }; - opp@700000000 { - opp-hz = /bits/ 64 <700000000>; - opp-microvolt = < 912500>; - clock-latency-ns = <140000>; - }; - }; - - cluster_a7_opp_table: opp_table1 { - compatible = "operating-points-v2"; - opp-shared; - opp@1300000000 { - opp-hz = /bits/ 64 <1300000000>; - opp-microvolt = <1275000>; - clock-latency-ns = <140000>; - }; - opp@1200000000 { - opp-hz = /bits/ 64 <1200000000>; - opp-microvolt = <1212500>; - clock-latency-ns = <140000>; - }; - opp@1100000000 { - opp-hz = /bits/ 64 <1100000000>; - opp-microvolt = <1162500>; - clock-latency-ns = <140000>; - }; - opp@1000000000 { - opp-hz = /bits/ 64 <1000000000>; - opp-microvolt = <1112500>; - clock-latency-ns = <140000>; - }; - opp@900000000 { - opp-hz = /bits/ 64 <900000000>; - opp-microvolt = <1062500>; - clock-latency-ns = <140000>; - }; - opp@800000000 { - opp-hz = /bits/ 64 <800000000>; - opp-microvolt = <1025000>; - clock-latency-ns = <140000>; - }; - opp@700000000 { - opp-hz = /bits/ 64 <700000000>; - opp-microvolt = <975000>; - clock-latency-ns = <140000>; - }; - opp@600000000 { - opp-hz = /bits/ 64 <600000000>; - opp-microvolt = <937500>; - clock-latency-ns = <140000>; - }; }; /* @@ -165,1434 +45,1270 @@ * by exynos5420-cpus.dtsi or exynos5422-cpus.dtsi. */ - cci: cci@10d20000 { - compatible = "arm,cci-400"; - #address-cells = <1>; - #size-cells = <1>; - reg = <0x10d20000 0x1000>; - ranges = <0x0 0x10d20000 0x6000>; - - cci_control0: slave-if@4000 { - compatible = "arm,cci-400-ctrl-if"; - interface-type = "ace"; - reg = <0x4000 0x1000>; - }; - cci_control1: slave-if@5000 { - compatible = "arm,cci-400-ctrl-if"; - interface-type = "ace"; - reg = <0x5000 0x1000>; + soc: soc { + cluster_a15_opp_table: opp_table0 { + compatible = "operating-points-v2"; + opp-shared; + opp@1800000000 { + opp-hz = /bits/ 64 <1800000000>; + opp-microvolt = <1250000>; + clock-latency-ns = <140000>; + }; + opp@1700000000 { + opp-hz = /bits/ 64 <1700000000>; + opp-microvolt = <1212500>; + clock-latency-ns = <140000>; + }; + opp@1600000000 { + opp-hz = /bits/ 64 <1600000000>; + opp-microvolt = <1175000>; + clock-latency-ns = <140000>; + }; + opp@1500000000 { + opp-hz = /bits/ 64 <1500000000>; + opp-microvolt = <1137500>; + clock-latency-ns = <140000>; + }; + opp@1400000000 { + opp-hz = /bits/ 64 <1400000000>; + opp-microvolt = <1112500>; + clock-latency-ns = <140000>; + }; + opp@1300000000 { + opp-hz = /bits/ 64 <1300000000>; + opp-microvolt = <1062500>; + clock-latency-ns = <140000>; + }; + opp@1200000000 { + opp-hz = /bits/ 64 <1200000000>; + opp-microvolt = <1037500>; + clock-latency-ns = <140000>; + }; + opp@1100000000 { + opp-hz = /bits/ 64 <1100000000>; + opp-microvolt = <1012500>; + clock-latency-ns = <140000>; + }; + opp@1000000000 { + opp-hz = /bits/ 64 <1000000000>; + opp-microvolt = < 987500>; + clock-latency-ns = <140000>; + }; + opp@900000000 { + opp-hz = /bits/ 64 <900000000>; + opp-microvolt = < 962500>; + clock-latency-ns = <140000>; + }; + opp@800000000 { + opp-hz = /bits/ 64 <800000000>; + opp-microvolt = < 937500>; + clock-latency-ns = <140000>; + }; + opp@700000000 { + opp-hz = /bits/ 64 <700000000>; + opp-microvolt = < 912500>; + clock-latency-ns = <140000>; + }; + }; + + cluster_a7_opp_table: opp_table1 { + compatible = "operating-points-v2"; + opp-shared; + opp@1300000000 { + opp-hz = /bits/ 64 <1300000000>; + opp-microvolt = <1275000>; + clock-latency-ns = <140000>; + }; + opp@1200000000 { + opp-hz = /bits/ 64 <1200000000>; + opp-microvolt = <1212500>; + clock-latency-ns = <140000>; + }; + opp@1100000000 { + opp-hz = /bits/ 64 <1100000000>; + opp-microvolt = <1162500>; + clock-latency-ns = <140000>; + }; + opp@1000000000 { + opp-hz = /bits/ 64 <1000000000>; + opp-microvolt = <1112500>; + clock-latency-ns = <140000>; + }; + opp@900000000 { + opp-hz = /bits/ 64 <900000000>; + opp-microvolt = <1062500>; + clock-latency-ns = <140000>; + }; + opp@800000000 { + opp-hz = /bits/ 64 <800000000>; + opp-microvolt = <1025000>; + clock-latency-ns = <140000>; + }; + opp@700000000 { + opp-hz = /bits/ 64 <700000000>; + opp-microvolt = <975000>; + clock-latency-ns = <140000>; + }; + opp@600000000 { + opp-hz = /bits/ 64 <600000000>; + opp-microvolt = <937500>; + clock-latency-ns = <140000>; + }; + }; + + cci: cci@10d20000 { + compatible = "arm,cci-400"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x10d20000 0x1000>; + ranges = <0x0 0x10d20000 0x6000>; + + cci_control0: slave-if@4000 { + compatible = "arm,cci-400-ctrl-if"; + interface-type = "ace"; + reg = <0x4000 0x1000>; + }; + cci_control1: slave-if@5000 { + compatible = "arm,cci-400-ctrl-if"; + interface-type = "ace"; + reg = <0x5000 0x1000>; + }; + }; + + clock: clock-controller@10010000 { + compatible = "samsung,exynos5420-clock"; + reg = <0x10010000 0x30000>; + #clock-cells = <1>; + }; + + clock_audss: audss-clock-controller@3810000 { + compatible = "samsung,exynos5420-audss-clock"; + reg = <0x03810000 0x0C>; + #clock-cells = <1>; + clocks = <&clock CLK_FIN_PLL>, <&clock CLK_MAU_EPLL>, + <&clock CLK_SCLK_MAUDIO0>, <&clock CLK_SCLK_MAUPCM0>; + clock-names = "pll_ref", "pll_in", "sclk_audio", "sclk_pcm_in"; + }; + + mfc: codec@11000000 { + compatible = "samsung,mfc-v7"; + reg = <0x11000000 0x10000>; + interrupts = <0 96 0>; + clocks = <&clock CLK_MFC>; + clock-names = "mfc"; + power-domains = <&mfc_pd>; + iommus = <&sysmmu_mfc_l>, <&sysmmu_mfc_r>; + iommu-names = "left", "right"; + }; + + mmc_0: mmc@12200000 { + compatible = "samsung,exynos5420-dw-mshc-smu"; + interrupts = <0 75 0>; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x12200000 0x2000>; + clocks = <&clock CLK_MMC0>, <&clock CLK_SCLK_MMC0>; + clock-names = "biu", "ciu"; + fifo-depth = <0x40>; + status = "disabled"; }; - }; - - sysram@02020000 { - compatible = "mmio-sram"; - reg = <0x02020000 0x54000>; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0 0x02020000 0x54000>; - smp-sysram@0 { - compatible = "samsung,exynos4210-sysram"; - reg = <0x0 0x1000>; + mmc_1: mmc@12210000 { + compatible = "samsung,exynos5420-dw-mshc-smu"; + interrupts = <0 76 0>; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x12210000 0x2000>; + clocks = <&clock CLK_MMC1>, <&clock CLK_SCLK_MMC1>; + clock-names = "biu", "ciu"; + fifo-depth = <0x40>; + status = "disabled"; }; - smp-sysram@53000 { - compatible = "samsung,exynos4210-sysram-ns"; - reg = <0x53000 0x1000>; + mmc_2: mmc@12220000 { + compatible = "samsung,exynos5420-dw-mshc"; + interrupts = <0 77 0>; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x12220000 0x1000>; + clocks = <&clock CLK_MMC2>, <&clock CLK_SCLK_MMC2>; + clock-names = "biu", "ciu"; + fifo-depth = <0x40>; + status = "disabled"; }; - }; - - clock: clock-controller@10010000 { - compatible = "samsung,exynos5420-clock"; - reg = <0x10010000 0x30000>; - #clock-cells = <1>; - }; - clock_audss: audss-clock-controller@3810000 { - compatible = "samsung,exynos5420-audss-clock"; - reg = <0x03810000 0x0C>; - #clock-cells = <1>; - clocks = <&clock CLK_FIN_PLL>, <&clock CLK_MAU_EPLL>, - <&clock CLK_SCLK_MAUDIO0>, <&clock CLK_SCLK_MAUPCM0>; - clock-names = "pll_ref", "pll_in", "sclk_audio", "sclk_pcm_in"; - }; - - mfc: codec@11000000 { - compatible = "samsung,mfc-v7"; - reg = <0x11000000 0x10000>; - interrupts = <0 96 0>; - clocks = <&clock CLK_MFC>; - clock-names = "mfc"; - power-domains = <&mfc_pd>; - iommus = <&sysmmu_mfc_l>, <&sysmmu_mfc_r>; - iommu-names = "left", "right"; - }; + nocp_mem0_0: nocp@10CA1000 { + compatible = "samsung,exynos5420-nocp"; + reg = <0x10CA1000 0x200>; + status = "disabled"; + }; - mmc_0: mmc@12200000 { - compatible = "samsung,exynos5420-dw-mshc-smu"; - interrupts = <0 75 0>; - #address-cells = <1>; - #size-cells = <0>; - reg = <0x12200000 0x2000>; - clocks = <&clock CLK_MMC0>, <&clock CLK_SCLK_MMC0>; - clock-names = "biu", "ciu"; - fifo-depth = <0x40>; - status = "disabled"; - }; + nocp_mem0_1: nocp@10CA1400 { + compatible = "samsung,exynos5420-nocp"; + reg = <0x10CA1400 0x200>; + status = "disabled"; + }; - mmc_1: mmc@12210000 { - compatible = "samsung,exynos5420-dw-mshc-smu"; - interrupts = <0 76 0>; - #address-cells = <1>; - #size-cells = <0>; - reg = <0x12210000 0x2000>; - clocks = <&clock CLK_MMC1>, <&clock CLK_SCLK_MMC1>; - clock-names = "biu", "ciu"; - fifo-depth = <0x40>; - status = "disabled"; - }; + nocp_mem1_0: nocp@10CA1800 { + compatible = "samsung,exynos5420-nocp"; + reg = <0x10CA1800 0x200>; + status = "disabled"; + }; - mmc_2: mmc@12220000 { - compatible = "samsung,exynos5420-dw-mshc"; - interrupts = <0 77 0>; - #address-cells = <1>; - #size-cells = <0>; - reg = <0x12220000 0x1000>; - clocks = <&clock CLK_MMC2>, <&clock CLK_SCLK_MMC2>; - clock-names = "biu", "ciu"; - fifo-depth = <0x40>; - status = "disabled"; - }; + nocp_mem1_1: nocp@10CA1C00 { + compatible = "samsung,exynos5420-nocp"; + reg = <0x10CA1C00 0x200>; + status = "disabled"; + }; - mct: mct@101C0000 { - compatible = "samsung,exynos4210-mct"; - reg = <0x101C0000 0x800>; - interrupt-controller; - #interrupt-cells = <1>; - interrupt-parent = <&mct_map>; - interrupts = <0>, <1>, <2>, <3>, <4>, <5>, <6>, <7>, - <8>, <9>, <10>, <11>; - clocks = <&clock CLK_FIN_PLL>, <&clock CLK_MCT>; - clock-names = "fin_pll", "mct"; - - mct_map: mct-map { - #interrupt-cells = <1>; - #address-cells = <0>; - #size-cells = <0>; - interrupt-map = <0 &combiner 23 3>, - <1 &combiner 23 4>, - <2 &combiner 25 2>, - <3 &combiner 25 3>, - <4 &gic 0 120 0>, - <5 &gic 0 121 0>, - <6 &gic 0 122 0>, - <7 &gic 0 123 0>, - <8 &gic 0 128 0>, - <9 &gic 0 129 0>, - <10 &gic 0 130 0>, - <11 &gic 0 131 0>; + nocp_g3d_0: nocp@11A51000 { + compatible = "samsung,exynos5420-nocp"; + reg = <0x11A51000 0x200>; + status = "disabled"; }; - }; - nocp_mem0_0: nocp@10CA1000 { - compatible = "samsung,exynos5420-nocp"; - reg = <0x10CA1000 0x200>; - status = "disabled"; - }; + nocp_g3d_1: nocp@11A51400 { + compatible = "samsung,exynos5420-nocp"; + reg = <0x11A51400 0x200>; + status = "disabled"; + }; - nocp_mem0_1: nocp@10CA1400 { - compatible = "samsung,exynos5420-nocp"; - reg = <0x10CA1400 0x200>; - status = "disabled"; - }; + gsc_pd: power-domain@10044000 { + compatible = "samsung,exynos4210-pd"; + reg = <0x10044000 0x20>; + #power-domain-cells = <0>; + clocks = <&clock CLK_FIN_PLL>, + <&clock CLK_MOUT_USER_ACLK300_GSCL>, + <&clock CLK_GSCL0>, <&clock CLK_GSCL1>; + clock-names = "oscclk", "clk0", "asb0", "asb1"; + }; - nocp_mem1_0: nocp@10CA1800 { - compatible = "samsung,exynos5420-nocp"; - reg = <0x10CA1800 0x200>; - status = "disabled"; - }; + isp_pd: power-domain@10044020 { + compatible = "samsung,exynos4210-pd"; + reg = <0x10044020 0x20>; + #power-domain-cells = <0>; + }; - nocp_mem1_1: nocp@10CA1C00 { - compatible = "samsung,exynos5420-nocp"; - reg = <0x10CA1C00 0x200>; - status = "disabled"; - }; + mfc_pd: power-domain@10044060 { + compatible = "samsung,exynos4210-pd"; + reg = <0x10044060 0x20>; + clocks = <&clock CLK_FIN_PLL>, + <&clock CLK_MOUT_USER_ACLK333>, + <&clock CLK_ACLK333>; + clock-names = "oscclk", "clk0","asb0"; + #power-domain-cells = <0>; + }; - nocp_g3d_0: nocp@11A51000 { - compatible = "samsung,exynos5420-nocp"; - reg = <0x11A51000 0x200>; - status = "disabled"; - }; + msc_pd: power-domain@10044120 { + compatible = "samsung,exynos4210-pd"; + reg = <0x10044120 0x20>; + #power-domain-cells = <0>; + }; - nocp_g3d_1: nocp@11A51400 { - compatible = "samsung,exynos5420-nocp"; - reg = <0x11A51400 0x200>; - status = "disabled"; - }; + disp_pd: power-domain@100440C0 { + compatible = "samsung,exynos4210-pd"; + reg = <0x100440C0 0x20>; + #power-domain-cells = <0>; + clocks = <&clock CLK_FIN_PLL>, + <&clock CLK_MOUT_USER_ACLK200_DISP1>, + <&clock CLK_MOUT_USER_ACLK300_DISP1>, + <&clock CLK_MOUT_USER_ACLK400_DISP1>, + <&clock CLK_FIMD1>, <&clock CLK_MIXER>; + clock-names = "oscclk", "clk0", "clk1", "clk2", "asb0", "asb1"; + }; - gsc_pd: power-domain@10044000 { - compatible = "samsung,exynos4210-pd"; - reg = <0x10044000 0x20>; - #power-domain-cells = <0>; - clocks = <&clock CLK_FIN_PLL>, - <&clock CLK_MOUT_USER_ACLK300_GSCL>, - <&clock CLK_GSCL0>, <&clock CLK_GSCL1>; - clock-names = "oscclk", "clk0", "asb0", "asb1"; - }; + pinctrl_0: pinctrl@13400000 { + compatible = "samsung,exynos5420-pinctrl"; + reg = <0x13400000 0x1000>; + interrupts = <0 45 0>; - isp_pd: power-domain@10044020 { - compatible = "samsung,exynos4210-pd"; - reg = <0x10044020 0x20>; - #power-domain-cells = <0>; - }; + wakeup-interrupt-controller { + compatible = "samsung,exynos4210-wakeup-eint"; + interrupt-parent = <&gic>; + interrupts = <0 32 0>; + }; + }; - mfc_pd: power-domain@10044060 { - compatible = "samsung,exynos4210-pd"; - reg = <0x10044060 0x20>; - clocks = <&clock CLK_FIN_PLL>, <&clock CLK_MOUT_USER_ACLK333>; - clock-names = "oscclk", "clk0"; - #power-domain-cells = <0>; - }; + pinctrl_1: pinctrl@13410000 { + compatible = "samsung,exynos5420-pinctrl"; + reg = <0x13410000 0x1000>; + interrupts = <0 78 0>; + }; - msc_pd: power-domain@10044120 { - compatible = "samsung,exynos4210-pd"; - reg = <0x10044120 0x20>; - #power-domain-cells = <0>; - }; + pinctrl_2: pinctrl@14000000 { + compatible = "samsung,exynos5420-pinctrl"; + reg = <0x14000000 0x1000>; + interrupts = <0 46 0>; + }; - disp_pd: power-domain@100440C0 { - compatible = "samsung,exynos4210-pd"; - reg = <0x100440C0 0x20>; - #power-domain-cells = <0>; - clocks = <&clock CLK_FIN_PLL>, - <&clock CLK_MOUT_USER_ACLK200_DISP1>, - <&clock CLK_MOUT_USER_ACLK300_DISP1>, - <&clock CLK_MOUT_USER_ACLK400_DISP1>, - <&clock CLK_FIMD1>, <&clock CLK_MIXER>; - clock-names = "oscclk", "clk0", "clk1", "clk2", "asb0", "asb1"; - }; + pinctrl_3: pinctrl@14010000 { + compatible = "samsung,exynos5420-pinctrl"; + reg = <0x14010000 0x1000>; + interrupts = <0 50 0>; + }; - pinctrl_0: pinctrl@13400000 { - compatible = "samsung,exynos5420-pinctrl"; - reg = <0x13400000 0x1000>; - interrupts = <0 45 0>; + pinctrl_4: pinctrl@03860000 { + compatible = "samsung,exynos5420-pinctrl"; + reg = <0x03860000 0x1000>; + interrupts = <0 47 0>; + }; - wakeup-interrupt-controller { - compatible = "samsung,exynos4210-wakeup-eint"; + amba { + #address-cells = <1>; + #size-cells = <1>; + compatible = "simple-bus"; interrupt-parent = <&gic>; - interrupts = <0 32 0>; + ranges; + + adma: adma@03880000 { + compatible = "arm,pl330", "arm,primecell"; + reg = <0x03880000 0x1000>; + interrupts = <0 110 0>; + clocks = <&clock_audss EXYNOS_ADMA>; + clock-names = "apb_pclk"; + #dma-cells = <1>; + #dma-channels = <6>; + #dma-requests = <16>; + }; + + pdma0: pdma@121A0000 { + compatible = "arm,pl330", "arm,primecell"; + reg = <0x121A0000 0x1000>; + interrupts = <0 34 0>; + clocks = <&clock CLK_PDMA0>; + clock-names = "apb_pclk"; + #dma-cells = <1>; + #dma-channels = <8>; + #dma-requests = <32>; + }; + + pdma1: pdma@121B0000 { + compatible = "arm,pl330", "arm,primecell"; + reg = <0x121B0000 0x1000>; + interrupts = <0 35 0>; + clocks = <&clock CLK_PDMA1>; + clock-names = "apb_pclk"; + #dma-cells = <1>; + #dma-channels = <8>; + #dma-requests = <32>; + }; + + mdma0: mdma@10800000 { + compatible = "arm,pl330", "arm,primecell"; + reg = <0x10800000 0x1000>; + interrupts = <0 33 0>; + clocks = <&clock CLK_MDMA0>; + clock-names = "apb_pclk"; + #dma-cells = <1>; + #dma-channels = <8>; + #dma-requests = <1>; + }; + + mdma1: mdma@11C10000 { + compatible = "arm,pl330", "arm,primecell"; + reg = <0x11C10000 0x1000>; + interrupts = <0 124 0>; + clocks = <&clock CLK_MDMA1>; + clock-names = "apb_pclk"; + #dma-cells = <1>; + #dma-channels = <8>; + #dma-requests = <1>; + /* + * MDMA1 can support both secure and non-secure + * AXI transactions. When this is enabled in + * the kernel for boards that run in secure + * mode, we are getting imprecise external + * aborts causing the kernel to oops. + */ + status = "disabled"; + }; + }; + + i2s0: i2s@03830000 { + compatible = "samsung,exynos5420-i2s"; + reg = <0x03830000 0x100>; + dmas = <&adma 0 + &adma 2 + &adma 1>; + dma-names = "tx", "rx", "tx-sec"; + clocks = <&clock_audss EXYNOS_I2S_BUS>, + <&clock_audss EXYNOS_I2S_BUS>, + <&clock_audss EXYNOS_SCLK_I2S>; + clock-names = "iis", "i2s_opclk0", "i2s_opclk1"; + #clock-cells = <1>; + clock-output-names = "i2s_cdclk0"; + #sound-dai-cells = <1>; + samsung,idma-addr = <0x03000000>; + pinctrl-names = "default"; + pinctrl-0 = <&i2s0_bus>; + status = "disabled"; }; - }; - - pinctrl_1: pinctrl@13410000 { - compatible = "samsung,exynos5420-pinctrl"; - reg = <0x13410000 0x1000>; - interrupts = <0 78 0>; - }; - pinctrl_2: pinctrl@14000000 { - compatible = "samsung,exynos5420-pinctrl"; - reg = <0x14000000 0x1000>; - interrupts = <0 46 0>; - }; - - pinctrl_3: pinctrl@14010000 { - compatible = "samsung,exynos5420-pinctrl"; - reg = <0x14010000 0x1000>; - interrupts = <0 50 0>; - }; - - pinctrl_4: pinctrl@03860000 { - compatible = "samsung,exynos5420-pinctrl"; - reg = <0x03860000 0x1000>; - interrupts = <0 47 0>; - }; - - amba { - #address-cells = <1>; - #size-cells = <1>; - compatible = "simple-bus"; - interrupt-parent = <&gic>; - ranges; - - adma: adma@03880000 { - compatible = "arm,pl330", "arm,primecell"; - reg = <0x03880000 0x1000>; - interrupts = <0 110 0>; - clocks = <&clock_audss EXYNOS_ADMA>; - clock-names = "apb_pclk"; - #dma-cells = <1>; - #dma-channels = <6>; - #dma-requests = <16>; - }; - - pdma0: pdma@121A0000 { - compatible = "arm,pl330", "arm,primecell"; - reg = <0x121A0000 0x1000>; - interrupts = <0 34 0>; - clocks = <&clock CLK_PDMA0>; - clock-names = "apb_pclk"; - #dma-cells = <1>; - #dma-channels = <8>; - #dma-requests = <32>; - }; - - pdma1: pdma@121B0000 { - compatible = "arm,pl330", "arm,primecell"; - reg = <0x121B0000 0x1000>; - interrupts = <0 35 0>; - clocks = <&clock CLK_PDMA1>; - clock-names = "apb_pclk"; - #dma-cells = <1>; - #dma-channels = <8>; - #dma-requests = <32>; - }; - - mdma0: mdma@10800000 { - compatible = "arm,pl330", "arm,primecell"; - reg = <0x10800000 0x1000>; - interrupts = <0 33 0>; - clocks = <&clock CLK_MDMA0>; - clock-names = "apb_pclk"; - #dma-cells = <1>; - #dma-channels = <8>; - #dma-requests = <1>; - }; - - mdma1: mdma@11C10000 { - compatible = "arm,pl330", "arm,primecell"; - reg = <0x11C10000 0x1000>; - interrupts = <0 124 0>; - clocks = <&clock CLK_MDMA1>; - clock-names = "apb_pclk"; - #dma-cells = <1>; - #dma-channels = <8>; - #dma-requests = <1>; - /* - * MDMA1 can support both secure and non-secure - * AXI transactions. When this is enabled in the kernel - * for boards that run in secure mode, we are getting - * imprecise external aborts causing the kernel to oops. - */ + i2s1: i2s@12D60000 { + compatible = "samsung,exynos5420-i2s"; + reg = <0x12D60000 0x100>; + dmas = <&pdma1 12 + &pdma1 11>; + dma-names = "tx", "rx"; + clocks = <&clock CLK_I2S1>, <&clock CLK_SCLK_I2S1>; + clock-names = "iis", "i2s_opclk0"; + #clock-cells = <1>; + clock-output-names = "i2s_cdclk1"; + #sound-dai-cells = <1>; + pinctrl-names = "default"; + pinctrl-0 = <&i2s1_bus>; status = "disabled"; }; - }; - - i2s0: i2s@03830000 { - compatible = "samsung,exynos5420-i2s"; - reg = <0x03830000 0x100>; - dmas = <&adma 0 - &adma 2 - &adma 1>; - dma-names = "tx", "rx", "tx-sec"; - clocks = <&clock_audss EXYNOS_I2S_BUS>, - <&clock_audss EXYNOS_I2S_BUS>, - <&clock_audss EXYNOS_SCLK_I2S>; - clock-names = "iis", "i2s_opclk0", "i2s_opclk1"; - #clock-cells = <1>; - clock-output-names = "i2s_cdclk0"; - #sound-dai-cells = <1>; - samsung,idma-addr = <0x03000000>; - pinctrl-names = "default"; - pinctrl-0 = <&i2s0_bus>; - status = "disabled"; - }; - - i2s1: i2s@12D60000 { - compatible = "samsung,exynos5420-i2s"; - reg = <0x12D60000 0x100>; - dmas = <&pdma1 12 - &pdma1 11>; - dma-names = "tx", "rx"; - clocks = <&clock CLK_I2S1>, <&clock CLK_SCLK_I2S1>; - clock-names = "iis", "i2s_opclk0"; - #clock-cells = <1>; - clock-output-names = "i2s_cdclk1"; - #sound-dai-cells = <1>; - pinctrl-names = "default"; - pinctrl-0 = <&i2s1_bus>; - status = "disabled"; - }; - - i2s2: i2s@12D70000 { - compatible = "samsung,exynos5420-i2s"; - reg = <0x12D70000 0x100>; - dmas = <&pdma0 12 - &pdma0 11>; - dma-names = "tx", "rx"; - clocks = <&clock CLK_I2S2>, <&clock CLK_SCLK_I2S2>; - clock-names = "iis", "i2s_opclk0"; - #clock-cells = <1>; - clock-output-names = "i2s_cdclk2"; - #sound-dai-cells = <1>; - pinctrl-names = "default"; - pinctrl-0 = <&i2s2_bus>; - status = "disabled"; - }; - - spi_0: spi@12d20000 { - compatible = "samsung,exynos4210-spi"; - reg = <0x12d20000 0x100>; - interrupts = <0 68 0>; - dmas = <&pdma0 5 - &pdma0 4>; - dma-names = "tx", "rx"; - #address-cells = <1>; - #size-cells = <0>; - pinctrl-names = "default"; - pinctrl-0 = <&spi0_bus>; - clocks = <&clock CLK_SPI0>, <&clock CLK_SCLK_SPI0>; - clock-names = "spi", "spi_busclk0"; - status = "disabled"; - }; - - spi_1: spi@12d30000 { - compatible = "samsung,exynos4210-spi"; - reg = <0x12d30000 0x100>; - interrupts = <0 69 0>; - dmas = <&pdma1 5 - &pdma1 4>; - dma-names = "tx", "rx"; - #address-cells = <1>; - #size-cells = <0>; - pinctrl-names = "default"; - pinctrl-0 = <&spi1_bus>; - clocks = <&clock CLK_SPI1>, <&clock CLK_SCLK_SPI1>; - clock-names = "spi", "spi_busclk0"; - status = "disabled"; - }; - - spi_2: spi@12d40000 { - compatible = "samsung,exynos4210-spi"; - reg = <0x12d40000 0x100>; - interrupts = <0 70 0>; - dmas = <&pdma0 7 - &pdma0 6>; - dma-names = "tx", "rx"; - #address-cells = <1>; - #size-cells = <0>; - pinctrl-names = "default"; - pinctrl-0 = <&spi2_bus>; - clocks = <&clock CLK_SPI2>, <&clock CLK_SCLK_SPI2>; - clock-names = "spi", "spi_busclk0"; - status = "disabled"; - }; - - pwm: pwm@12dd0000 { - compatible = "samsung,exynos4210-pwm"; - reg = <0x12dd0000 0x100>; - samsung,pwm-outputs = <0>, <1>, <2>, <3>; - #pwm-cells = <3>; - clocks = <&clock CLK_PWM>; - clock-names = "timers"; - }; - - dp_phy: dp-video-phy { - compatible = "samsung,exynos5420-dp-video-phy"; - samsung,pmu-syscon = <&pmu_system_controller>; - #phy-cells = <0>; - }; - - mipi_phy: mipi-video-phy { - compatible = "samsung,s5pv210-mipi-video-phy"; - syscon = <&pmu_system_controller>; - #phy-cells = <1>; - }; - - dsi@14500000 { - compatible = "samsung,exynos5410-mipi-dsi"; - reg = <0x14500000 0x10000>; - interrupts = <0 82 0>; - phys = <&mipi_phy 1>; - phy-names = "dsim"; - clocks = <&clock CLK_DSIM1>, <&clock CLK_SCLK_MIPI1>; - clock-names = "bus_clk", "pll_clk"; - #address-cells = <1>; - #size-cells = <0>; - status = "disabled"; - }; - - adc: adc@12D10000 { - compatible = "samsung,exynos-adc-v2"; - reg = <0x12D10000 0x100>; - interrupts = <0 106 0>; - clocks = <&clock CLK_TSADC>; - clock-names = "adc"; - #io-channel-cells = <1>; - io-channel-ranges; - samsung,syscon-phandle = <&pmu_system_controller>; - status = "disabled"; - }; - - i2c_0: i2c@12C60000 { - compatible = "samsung,s3c2440-i2c"; - reg = <0x12C60000 0x100>; - interrupts = <0 56 0>; - #address-cells = <1>; - #size-cells = <0>; - clocks = <&clock CLK_I2C0>; - clock-names = "i2c"; - pinctrl-names = "default"; - pinctrl-0 = <&i2c0_bus>; - samsung,sysreg-phandle = <&sysreg_system_controller>; - status = "disabled"; - }; - - i2c_1: i2c@12C70000 { - compatible = "samsung,s3c2440-i2c"; - reg = <0x12C70000 0x100>; - interrupts = <0 57 0>; - #address-cells = <1>; - #size-cells = <0>; - clocks = <&clock CLK_I2C1>; - clock-names = "i2c"; - pinctrl-names = "default"; - pinctrl-0 = <&i2c1_bus>; - samsung,sysreg-phandle = <&sysreg_system_controller>; - status = "disabled"; - }; - - i2c_2: i2c@12C80000 { - compatible = "samsung,s3c2440-i2c"; - reg = <0x12C80000 0x100>; - interrupts = <0 58 0>; - #address-cells = <1>; - #size-cells = <0>; - clocks = <&clock CLK_I2C2>; - clock-names = "i2c"; - pinctrl-names = "default"; - pinctrl-0 = <&i2c2_bus>; - samsung,sysreg-phandle = <&sysreg_system_controller>; - status = "disabled"; - }; - - i2c_3: i2c@12C90000 { - compatible = "samsung,s3c2440-i2c"; - reg = <0x12C90000 0x100>; - interrupts = <0 59 0>; - #address-cells = <1>; - #size-cells = <0>; - clocks = <&clock CLK_I2C3>; - clock-names = "i2c"; - pinctrl-names = "default"; - pinctrl-0 = <&i2c3_bus>; - samsung,sysreg-phandle = <&sysreg_system_controller>; - status = "disabled"; - }; - hsi2c_4: i2c@12CA0000 { - compatible = "samsung,exynos5-hsi2c"; - reg = <0x12CA0000 0x1000>; - interrupts = <0 60 0>; - #address-cells = <1>; - #size-cells = <0>; - pinctrl-names = "default"; - pinctrl-0 = <&i2c4_hs_bus>; - clocks = <&clock CLK_USI0>; - clock-names = "hsi2c"; - status = "disabled"; - }; - - hsi2c_5: i2c@12CB0000 { - compatible = "samsung,exynos5-hsi2c"; - reg = <0x12CB0000 0x1000>; - interrupts = <0 61 0>; - #address-cells = <1>; - #size-cells = <0>; - pinctrl-names = "default"; - pinctrl-0 = <&i2c5_hs_bus>; - clocks = <&clock CLK_USI1>; - clock-names = "hsi2c"; - status = "disabled"; - }; - - hsi2c_6: i2c@12CC0000 { - compatible = "samsung,exynos5-hsi2c"; - reg = <0x12CC0000 0x1000>; - interrupts = <0 62 0>; - #address-cells = <1>; - #size-cells = <0>; - pinctrl-names = "default"; - pinctrl-0 = <&i2c6_hs_bus>; - clocks = <&clock CLK_USI2>; - clock-names = "hsi2c"; - status = "disabled"; - }; - - hsi2c_7: i2c@12CD0000 { - compatible = "samsung,exynos5-hsi2c"; - reg = <0x12CD0000 0x1000>; - interrupts = <0 63 0>; - #address-cells = <1>; - #size-cells = <0>; - pinctrl-names = "default"; - pinctrl-0 = <&i2c7_hs_bus>; - clocks = <&clock CLK_USI3>; - clock-names = "hsi2c"; - status = "disabled"; - }; - - hsi2c_8: i2c@12E00000 { - compatible = "samsung,exynos5-hsi2c"; - reg = <0x12E00000 0x1000>; - interrupts = <0 87 0>; - #address-cells = <1>; - #size-cells = <0>; - pinctrl-names = "default"; - pinctrl-0 = <&i2c8_hs_bus>; - clocks = <&clock CLK_USI4>; - clock-names = "hsi2c"; - status = "disabled"; - }; - - hsi2c_9: i2c@12E10000 { - compatible = "samsung,exynos5-hsi2c"; - reg = <0x12E10000 0x1000>; - interrupts = <0 88 0>; - #address-cells = <1>; - #size-cells = <0>; - pinctrl-names = "default"; - pinctrl-0 = <&i2c9_hs_bus>; - clocks = <&clock CLK_USI5>; - clock-names = "hsi2c"; - status = "disabled"; - }; - - hsi2c_10: i2c@12E20000 { - compatible = "samsung,exynos5-hsi2c"; - reg = <0x12E20000 0x1000>; - interrupts = <0 203 0>; - #address-cells = <1>; - #size-cells = <0>; - pinctrl-names = "default"; - pinctrl-0 = <&i2c10_hs_bus>; - clocks = <&clock CLK_USI6>; - clock-names = "hsi2c"; - status = "disabled"; - }; - - hdmi: hdmi@14530000 { - compatible = "samsung,exynos5420-hdmi"; - reg = <0x14530000 0x70000>; - interrupts = <0 95 0>; - clocks = <&clock CLK_HDMI>, <&clock CLK_SCLK_HDMI>, - <&clock CLK_DOUT_PIXEL>, <&clock CLK_SCLK_HDMIPHY>, - <&clock CLK_MOUT_HDMI>; - clock-names = "hdmi", "sclk_hdmi", "sclk_pixel", - "sclk_hdmiphy", "mout_hdmi"; - phy = <&hdmiphy>; - samsung,syscon-phandle = <&pmu_system_controller>; - status = "disabled"; - power-domains = <&disp_pd>; - }; - - hdmiphy: hdmiphy@145D0000 { - reg = <0x145D0000 0x20>; - }; - - mixer: mixer@14450000 { - compatible = "samsung,exynos5420-mixer"; - reg = <0x14450000 0x10000>; - interrupts = <0 94 0>; - clocks = <&clock CLK_MIXER>, <&clock CLK_HDMI>, - <&clock CLK_SCLK_HDMI>; - clock-names = "mixer", "hdmi", "sclk_hdmi"; - power-domains = <&disp_pd>; - iommus = <&sysmmu_tv>; - }; - - rotator: rotator@11C00000 { - compatible = "samsung,exynos5250-rotator"; - reg = <0x11C00000 0x64>; - interrupts = <0 84 0>; - clocks = <&clock CLK_ROTATOR>; - clock-names = "rotator"; - iommus = <&sysmmu_rotator>; - }; - - gsc_0: video-scaler@13e00000 { - compatible = "samsung,exynos5-gsc"; - reg = <0x13e00000 0x1000>; - interrupts = <0 85 0>; - clocks = <&clock CLK_GSCL0>; - clock-names = "gscl"; - power-domains = <&gsc_pd>; - iommus = <&sysmmu_gscl0>; - }; - - gsc_1: video-scaler@13e10000 { - compatible = "samsung,exynos5-gsc"; - reg = <0x13e10000 0x1000>; - interrupts = <0 86 0>; - clocks = <&clock CLK_GSCL1>; - clock-names = "gscl"; - power-domains = <&gsc_pd>; - iommus = <&sysmmu_gscl1>; - }; - - jpeg_0: jpeg@11F50000 { - compatible = "samsung,exynos5420-jpeg"; - reg = <0x11F50000 0x1000>; - interrupts = <0 89 0>; - clock-names = "jpeg"; - clocks = <&clock CLK_JPEG>; - iommus = <&sysmmu_jpeg0>; - }; - - jpeg_1: jpeg@11F60000 { - compatible = "samsung,exynos5420-jpeg"; - reg = <0x11F60000 0x1000>; - interrupts = <0 168 0>; - clock-names = "jpeg"; - clocks = <&clock CLK_JPEG2>; - iommus = <&sysmmu_jpeg1>; - }; - - pmu_system_controller: system-controller@10040000 { - compatible = "samsung,exynos5420-pmu", "syscon"; - reg = <0x10040000 0x5000>; - clock-names = "clkout16"; - clocks = <&clock CLK_FIN_PLL>; - #clock-cells = <1>; - interrupt-controller; - #interrupt-cells = <3>; - interrupt-parent = <&gic>; - }; - - sysreg_system_controller: syscon@10050000 { - compatible = "samsung,exynos5-sysreg", "syscon"; - reg = <0x10050000 0x5000>; - }; - - tmu_cpu0: tmu@10060000 { - compatible = "samsung,exynos5420-tmu"; - reg = <0x10060000 0x100>; - interrupts = <0 65 0>; - clocks = <&clock CLK_TMU>; - clock-names = "tmu_apbif"; - #include "exynos4412-tmu-sensor-conf.dtsi" - }; - - tmu_cpu1: tmu@10064000 { - compatible = "samsung,exynos5420-tmu"; - reg = <0x10064000 0x100>; - interrupts = <0 183 0>; - clocks = <&clock CLK_TMU>; - clock-names = "tmu_apbif"; - #include "exynos4412-tmu-sensor-conf.dtsi" - }; - - tmu_cpu2: tmu@10068000 { - compatible = "samsung,exynos5420-tmu-ext-triminfo"; - reg = <0x10068000 0x100>, <0x1006c000 0x4>; - interrupts = <0 184 0>; - clocks = <&clock CLK_TMU>, <&clock CLK_TMU>; - clock-names = "tmu_apbif", "tmu_triminfo_apbif"; - #include "exynos4412-tmu-sensor-conf.dtsi" - }; - - tmu_cpu3: tmu@1006c000 { - compatible = "samsung,exynos5420-tmu-ext-triminfo"; - reg = <0x1006c000 0x100>, <0x100a0000 0x4>; - interrupts = <0 185 0>; - clocks = <&clock CLK_TMU>, <&clock CLK_TMU_GPU>; - clock-names = "tmu_apbif", "tmu_triminfo_apbif"; - #include "exynos4412-tmu-sensor-conf.dtsi" - }; - - tmu_gpu: tmu@100a0000 { - compatible = "samsung,exynos5420-tmu-ext-triminfo"; - reg = <0x100a0000 0x100>, <0x10068000 0x4>; - interrupts = <0 215 0>; - clocks = <&clock CLK_TMU_GPU>, <&clock CLK_TMU>; - clock-names = "tmu_apbif", "tmu_triminfo_apbif"; - #include "exynos4412-tmu-sensor-conf.dtsi" - }; - - thermal-zones { - cpu0_thermal: cpu0-thermal { - thermal-sensors = <&tmu_cpu0>; - #include "exynos5420-trip-points.dtsi" - }; - cpu1_thermal: cpu1-thermal { - thermal-sensors = <&tmu_cpu1>; - #include "exynos5420-trip-points.dtsi" - }; - cpu2_thermal: cpu2-thermal { - thermal-sensors = <&tmu_cpu2>; - #include "exynos5420-trip-points.dtsi" - }; - cpu3_thermal: cpu3-thermal { - thermal-sensors = <&tmu_cpu3>; - #include "exynos5420-trip-points.dtsi" - }; - gpu_thermal: gpu-thermal { - thermal-sensors = <&tmu_gpu>; - #include "exynos5420-trip-points.dtsi" + i2s2: i2s@12D70000 { + compatible = "samsung,exynos5420-i2s"; + reg = <0x12D70000 0x100>; + dmas = <&pdma0 12 + &pdma0 11>; + dma-names = "tx", "rx"; + clocks = <&clock CLK_I2S2>, <&clock CLK_SCLK_I2S2>; + clock-names = "iis", "i2s_opclk0"; + #clock-cells = <1>; + clock-output-names = "i2s_cdclk2"; + #sound-dai-cells = <1>; + pinctrl-names = "default"; + pinctrl-0 = <&i2s2_bus>; + status = "disabled"; }; - }; - watchdog: watchdog@101D0000 { - compatible = "samsung,exynos5420-wdt"; - reg = <0x101D0000 0x100>; - interrupts = <0 42 0>; - clocks = <&clock CLK_WDT>; - clock-names = "watchdog"; - samsung,syscon-phandle = <&pmu_system_controller>; - }; - - sss: sss@10830000 { - compatible = "samsung,exynos4210-secss"; - reg = <0x10830000 0x300>; - interrupts = <0 112 0>; - clocks = <&clock CLK_SSS>; - clock-names = "secss"; - }; - - usbdrd3_0: usb3-0 { - compatible = "samsung,exynos5250-dwusb3"; - clocks = <&clock CLK_USBD300>; - clock-names = "usbdrd30"; - #address-cells = <1>; - #size-cells = <1>; - ranges; - - usbdrd_dwc3_0: dwc3@12000000 { - compatible = "snps,dwc3"; - reg = <0x12000000 0x10000>; - interrupts = <0 72 0>; - phys = <&usbdrd_phy0 0>, <&usbdrd_phy0 1>; - phy-names = "usb2-phy", "usb3-phy"; + spi_0: spi@12d20000 { + compatible = "samsung,exynos4210-spi"; + reg = <0x12d20000 0x100>; + interrupts = <0 68 0>; + dmas = <&pdma0 5 + &pdma0 4>; + dma-names = "tx", "rx"; + #address-cells = <1>; + #size-cells = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&spi0_bus>; + clocks = <&clock CLK_SPI0>, <&clock CLK_SCLK_SPI0>; + clock-names = "spi", "spi_busclk0"; + status = "disabled"; }; - }; - - usbdrd_phy0: phy@12100000 { - compatible = "samsung,exynos5420-usbdrd-phy"; - reg = <0x12100000 0x100>; - clocks = <&clock CLK_USBD300>, <&clock CLK_SCLK_USBPHY300>; - clock-names = "phy", "ref"; - samsung,pmu-syscon = <&pmu_system_controller>; - #phy-cells = <1>; - }; - usbdrd3_1: usb3-1 { - compatible = "samsung,exynos5250-dwusb3"; - clocks = <&clock CLK_USBD301>; - clock-names = "usbdrd30"; - #address-cells = <1>; - #size-cells = <1>; - ranges; - - usbdrd_dwc3_1: dwc3@12400000 { - compatible = "snps,dwc3"; - reg = <0x12400000 0x10000>; - interrupts = <0 73 0>; - phys = <&usbdrd_phy1 0>, <&usbdrd_phy1 1>; - phy-names = "usb2-phy", "usb3-phy"; + spi_1: spi@12d30000 { + compatible = "samsung,exynos4210-spi"; + reg = <0x12d30000 0x100>; + interrupts = <0 69 0>; + dmas = <&pdma1 5 + &pdma1 4>; + dma-names = "tx", "rx"; + #address-cells = <1>; + #size-cells = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&spi1_bus>; + clocks = <&clock CLK_SPI1>, <&clock CLK_SCLK_SPI1>; + clock-names = "spi", "spi_busclk0"; + status = "disabled"; }; - }; - - usbdrd_phy1: phy@12500000 { - compatible = "samsung,exynos5420-usbdrd-phy"; - reg = <0x12500000 0x100>; - clocks = <&clock CLK_USBD301>, <&clock CLK_SCLK_USBPHY301>; - clock-names = "phy", "ref"; - samsung,pmu-syscon = <&pmu_system_controller>; - #phy-cells = <1>; - }; - - usbhost2: usb@12110000 { - compatible = "samsung,exynos4210-ehci"; - reg = <0x12110000 0x100>; - interrupts = <0 71 0>; - clocks = <&clock CLK_USBH20>; - clock-names = "usbhost"; - #address-cells = <1>; - #size-cells = <0>; - port@0 { - reg = <0>; - phys = <&usb2_phy 1>; + spi_2: spi@12d40000 { + compatible = "samsung,exynos4210-spi"; + reg = <0x12d40000 0x100>; + interrupts = <0 70 0>; + dmas = <&pdma0 7 + &pdma0 6>; + dma-names = "tx", "rx"; + #address-cells = <1>; + #size-cells = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&spi2_bus>; + clocks = <&clock CLK_SPI2>, <&clock CLK_SCLK_SPI2>; + clock-names = "spi", "spi_busclk0"; + status = "disabled"; }; - }; - usbhost1: usb@12120000 { - compatible = "samsung,exynos4210-ohci"; - reg = <0x12120000 0x100>; - interrupts = <0 71 0>; - - clocks = <&clock CLK_USBH20>; - clock-names = "usbhost"; - #address-cells = <1>; - #size-cells = <0>; - port@0 { - reg = <0>; - phys = <&usb2_phy 1>; + dp_phy: dp-video-phy { + compatible = "samsung,exynos5420-dp-video-phy"; + samsung,pmu-syscon = <&pmu_system_controller>; + #phy-cells = <0>; }; - }; - - usb2_phy: phy@12130000 { - compatible = "samsung,exynos5250-usb2-phy"; - reg = <0x12130000 0x100>; - clocks = <&clock CLK_USBH20>, <&clock CLK_SCLK_USBPHY300>; - clock-names = "phy", "ref"; - #phy-cells = <1>; - samsung,sysreg-phandle = <&sysreg_system_controller>; - samsung,pmureg-phandle = <&pmu_system_controller>; - }; - - sysmmu_g2dr: sysmmu@0x10A60000 { - compatible = "samsung,exynos-sysmmu"; - reg = <0x10A60000 0x1000>; - interrupt-parent = <&combiner>; - interrupts = <24 5>; - clock-names = "sysmmu", "master"; - clocks = <&clock CLK_SMMU_G2D>, <&clock CLK_G2D>; - #iommu-cells = <0>; - }; - - sysmmu_g2dw: sysmmu@0x10A70000 { - compatible = "samsung,exynos-sysmmu"; - reg = <0x10A70000 0x1000>; - interrupt-parent = <&combiner>; - interrupts = <22 2>; - clock-names = "sysmmu", "master"; - clocks = <&clock CLK_SMMU_G2D>, <&clock CLK_G2D>; - #iommu-cells = <0>; - }; - - sysmmu_tv: sysmmu@0x14650000 { - compatible = "samsung,exynos-sysmmu"; - reg = <0x14650000 0x1000>; - interrupt-parent = <&combiner>; - interrupts = <7 4>; - clock-names = "sysmmu", "master"; - clocks = <&clock CLK_SMMU_MIXER>, <&clock CLK_MIXER>; - power-domains = <&disp_pd>; - #iommu-cells = <0>; - }; - - sysmmu_gscl0: sysmmu@0x13E80000 { - compatible = "samsung,exynos-sysmmu"; - reg = <0x13E80000 0x1000>; - interrupt-parent = <&combiner>; - interrupts = <2 0>; - clock-names = "sysmmu", "master"; - clocks = <&clock CLK_SMMU_GSCL0>, <&clock CLK_GSCL0>; - power-domains = <&gsc_pd>; - #iommu-cells = <0>; - }; - - sysmmu_gscl1: sysmmu@0x13E90000 { - compatible = "samsung,exynos-sysmmu"; - reg = <0x13E90000 0x1000>; - interrupt-parent = <&combiner>; - interrupts = <2 2>; - clock-names = "sysmmu", "master"; - clocks = <&clock CLK_SMMU_GSCL1>, <&clock CLK_GSCL1>; - power-domains = <&gsc_pd>; - #iommu-cells = <0>; - }; - - sysmmu_scaler0r: sysmmu@0x12880000 { - compatible = "samsung,exynos-sysmmu"; - reg = <0x12880000 0x1000>; - interrupt-parent = <&combiner>; - interrupts = <22 4>; - clock-names = "sysmmu", "master"; - clocks = <&clock CLK_SMMU_MSCL0>, <&clock CLK_MSCL0>; - #iommu-cells = <0>; - }; - - sysmmu_scaler1r: sysmmu@0x12890000 { - compatible = "samsung,exynos-sysmmu"; - reg = <0x12890000 0x1000>; - interrupts = <0 186 0>; - clock-names = "sysmmu", "master"; - clocks = <&clock CLK_SMMU_MSCL1>, <&clock CLK_MSCL1>; - #iommu-cells = <0>; - }; - sysmmu_scaler2r: sysmmu@0x128A0000 { - compatible = "samsung,exynos-sysmmu"; - reg = <0x128A0000 0x1000>; - interrupts = <0 188 0>; - clock-names = "sysmmu", "master"; - clocks = <&clock CLK_SMMU_MSCL2>, <&clock CLK_MSCL2>; - #iommu-cells = <0>; - }; - - sysmmu_scaler0w: sysmmu@0x128C0000 { - compatible = "samsung,exynos-sysmmu"; - reg = <0x128C0000 0x1000>; - interrupt-parent = <&combiner>; - interrupts = <27 2>; - clock-names = "sysmmu", "master"; - clocks = <&clock CLK_SMMU_MSCL0>, <&clock CLK_MSCL0>; - #iommu-cells = <0>; - }; - - sysmmu_scaler1w: sysmmu@0x128D0000 { - compatible = "samsung,exynos-sysmmu"; - reg = <0x128D0000 0x1000>; - interrupt-parent = <&combiner>; - interrupts = <22 6>; - clock-names = "sysmmu", "master"; - clocks = <&clock CLK_SMMU_MSCL1>, <&clock CLK_MSCL1>; - #iommu-cells = <0>; - }; - - sysmmu_scaler2w: sysmmu@0x128E0000 { - compatible = "samsung,exynos-sysmmu"; - reg = <0x128E0000 0x1000>; - interrupt-parent = <&combiner>; - interrupts = <19 6>; - clock-names = "sysmmu", "master"; - clocks = <&clock CLK_SMMU_MSCL2>, <&clock CLK_MSCL2>; - #iommu-cells = <0>; - }; - - sysmmu_rotator: sysmmu@0x11D40000 { - compatible = "samsung,exynos-sysmmu"; - reg = <0x11D40000 0x1000>; - interrupt-parent = <&combiner>; - interrupts = <4 0>; - clock-names = "sysmmu", "master"; - clocks = <&clock CLK_SMMU_ROTATOR>, <&clock CLK_ROTATOR>; - #iommu-cells = <0>; - }; - - sysmmu_jpeg0: sysmmu@0x11F10000 { - compatible = "samsung,exynos-sysmmu"; - reg = <0x11F10000 0x1000>; - interrupt-parent = <&combiner>; - interrupts = <4 2>; - clock-names = "sysmmu", "master"; - clocks = <&clock CLK_SMMU_JPEG>, <&clock CLK_JPEG>; - #iommu-cells = <0>; - }; - - sysmmu_jpeg1: sysmmu@0x11F20000 { - compatible = "samsung,exynos-sysmmu"; - reg = <0x11F20000 0x1000>; - interrupts = <0 169 0>; - clock-names = "sysmmu", "master"; - clocks = <&clock CLK_SMMU_JPEG2>, <&clock CLK_JPEG2>; - #iommu-cells = <0>; - }; - - sysmmu_mfc_l: sysmmu@0x11200000 { - compatible = "samsung,exynos-sysmmu"; - reg = <0x11200000 0x1000>; - interrupt-parent = <&combiner>; - interrupts = <6 2>; - clock-names = "sysmmu", "master"; - clocks = <&clock CLK_SMMU_MFCL>, <&clock CLK_MFC>; - power-domains = <&mfc_pd>; - #iommu-cells = <0>; - }; - - sysmmu_mfc_r: sysmmu@0x11210000 { - compatible = "samsung,exynos-sysmmu"; - reg = <0x11210000 0x1000>; - interrupt-parent = <&combiner>; - interrupts = <8 5>; - clock-names = "sysmmu", "master"; - clocks = <&clock CLK_SMMU_MFCR>, <&clock CLK_MFC>; - power-domains = <&mfc_pd>; - #iommu-cells = <0>; - }; - - sysmmu_fimd1_0: sysmmu@0x14640000 { - compatible = "samsung,exynos-sysmmu"; - reg = <0x14640000 0x1000>; - interrupt-parent = <&combiner>; - interrupts = <3 2>; - clock-names = "sysmmu", "master"; - clocks = <&clock CLK_SMMU_FIMD1M0>, <&clock CLK_FIMD1>; - power-domains = <&disp_pd>; - #iommu-cells = <0>; - }; - - sysmmu_fimd1_1: sysmmu@0x14680000 { - compatible = "samsung,exynos-sysmmu"; - reg = <0x14680000 0x1000>; - interrupt-parent = <&combiner>; - interrupts = <3 0>; - clock-names = "sysmmu", "master"; - clocks = <&clock CLK_SMMU_FIMD1M1>, <&clock CLK_FIMD1>; - power-domains = <&disp_pd>; - #iommu-cells = <0>; - }; - - bus_wcore: bus_wcore { - compatible = "samsung,exynos-bus"; - clocks = <&clock CLK_DOUT_ACLK400_WCORE>; - clock-names = "bus"; - operating-points-v2 = <&bus_wcore_opp_table>; - status = "disabled"; - }; - - bus_noc: bus_noc { - compatible = "samsung,exynos-bus"; - clocks = <&clock CLK_DOUT_ACLK100_NOC>; - clock-names = "bus"; - operating-points-v2 = <&bus_noc_opp_table>; - status = "disabled"; - }; - - bus_fsys_apb: bus_fsys_apb { - compatible = "samsung,exynos-bus"; - clocks = <&clock CLK_DOUT_PCLK200_FSYS>; - clock-names = "bus"; - operating-points-v2 = <&bus_fsys_apb_opp_table>; - status = "disabled"; - }; - - bus_fsys: bus_fsys { - compatible = "samsung,exynos-bus"; - clocks = <&clock CLK_DOUT_ACLK200_FSYS>; - clock-names = "bus"; - operating-points-v2 = <&bus_fsys_apb_opp_table>; - status = "disabled"; - }; - - bus_fsys2: bus_fsys2 { - compatible = "samsung,exynos-bus"; - clocks = <&clock CLK_DOUT_ACLK200_FSYS2>; - clock-names = "bus"; - operating-points-v2 = <&bus_fsys2_opp_table>; - status = "disabled"; - }; - - bus_mfc: bus_mfc { - compatible = "samsung,exynos-bus"; - clocks = <&clock CLK_DOUT_ACLK333>; - clock-names = "bus"; - operating-points-v2 = <&bus_mfc_opp_table>; - status = "disabled"; - }; - - bus_gen: bus_gen { - compatible = "samsung,exynos-bus"; - clocks = <&clock CLK_DOUT_ACLK266>; - clock-names = "bus"; - operating-points-v2 = <&bus_gen_opp_table>; - status = "disabled"; - }; - - bus_peri: bus_peri { - compatible = "samsung,exynos-bus"; - clocks = <&clock CLK_DOUT_ACLK66>; - clock-names = "bus"; - operating-points-v2 = <&bus_peri_opp_table>; - status = "disabled"; - }; - - bus_g2d: bus_g2d { - compatible = "samsung,exynos-bus"; - clocks = <&clock CLK_DOUT_ACLK333_G2D>; - clock-names = "bus"; - operating-points-v2 = <&bus_g2d_opp_table>; - status = "disabled"; - }; - - bus_g2d_acp: bus_g2d_acp { - compatible = "samsung,exynos-bus"; - clocks = <&clock CLK_DOUT_ACLK266_G2D>; - clock-names = "bus"; - operating-points-v2 = <&bus_g2d_acp_opp_table>; - status = "disabled"; - }; - - bus_jpeg: bus_jpeg { - compatible = "samsung,exynos-bus"; - clocks = <&clock CLK_DOUT_ACLK300_JPEG>; - clock-names = "bus"; - operating-points-v2 = <&bus_jpeg_opp_table>; - status = "disabled"; - }; - - bus_jpeg_apb: bus_jpeg_apb { - compatible = "samsung,exynos-bus"; - clocks = <&clock CLK_DOUT_ACLK166>; - clock-names = "bus"; - operating-points-v2 = <&bus_jpeg_apb_opp_table>; - status = "disabled"; - }; - - bus_disp1_fimd: bus_disp1_fimd { - compatible = "samsung,exynos-bus"; - clocks = <&clock CLK_DOUT_ACLK300_DISP1>; - clock-names = "bus"; - operating-points-v2 = <&bus_disp1_fimd_opp_table>; - status = "disabled"; - }; - - bus_disp1: bus_disp1 { - compatible = "samsung,exynos-bus"; - clocks = <&clock CLK_DOUT_ACLK400_DISP1>; - clock-names = "bus"; - operating-points-v2 = <&bus_disp1_opp_table>; - status = "disabled"; - }; - - bus_gscl_scaler: bus_gscl_scaler { - compatible = "samsung,exynos-bus"; - clocks = <&clock CLK_DOUT_ACLK300_GSCL>; - clock-names = "bus"; - operating-points-v2 = <&bus_gscl_opp_table>; - status = "disabled"; - }; - - bus_mscl: bus_mscl { - compatible = "samsung,exynos-bus"; - clocks = <&clock CLK_DOUT_ACLK400_MSCL>; - clock-names = "bus"; - operating-points-v2 = <&bus_mscl_opp_table>; - status = "disabled"; - }; - - bus_wcore_opp_table: opp_table2 { - compatible = "operating-points-v2"; - - opp00 { - opp-hz = /bits/ 64 <84000000>; - opp-microvolt = <925000>; - }; - opp01 { - opp-hz = /bits/ 64 <111000000>; - opp-microvolt = <950000>; - }; - opp02 { - opp-hz = /bits/ 64 <222000000>; - opp-microvolt = <950000>; + mipi_phy: mipi-video-phy { + compatible = "samsung,s5pv210-mipi-video-phy"; + syscon = <&pmu_system_controller>; + #phy-cells = <1>; }; - opp03 { - opp-hz = /bits/ 64 <333000000>; - opp-microvolt = <950000>; - }; - opp04 { - opp-hz = /bits/ 64 <400000000>; - opp-microvolt = <987500>; - }; - }; - bus_noc_opp_table: opp_table3 { - compatible = "operating-points-v2"; - - opp00 { - opp-hz = /bits/ 64 <67000000>; - }; - opp01 { - opp-hz = /bits/ 64 <75000000>; - }; - opp02 { - opp-hz = /bits/ 64 <86000000>; - }; - opp03 { - opp-hz = /bits/ 64 <100000000>; + dsi@14500000 { + compatible = "samsung,exynos5410-mipi-dsi"; + reg = <0x14500000 0x10000>; + interrupts = <0 82 0>; + phys = <&mipi_phy 1>; + phy-names = "dsim"; + clocks = <&clock CLK_DSIM1>, <&clock CLK_SCLK_MIPI1>; + clock-names = "bus_clk", "pll_clk"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; }; - }; - - bus_fsys_apb_opp_table: opp_table4 { - compatible = "operating-points-v2"; - opp-shared; - opp00 { - opp-hz = /bits/ 64 <100000000>; - }; - opp01 { - opp-hz = /bits/ 64 <200000000>; + adc: adc@12D10000 { + compatible = "samsung,exynos-adc-v2"; + reg = <0x12D10000 0x100>; + interrupts = <0 106 0>; + clocks = <&clock CLK_TSADC>; + clock-names = "adc"; + #io-channel-cells = <1>; + io-channel-ranges; + samsung,syscon-phandle = <&pmu_system_controller>; + status = "disabled"; }; - }; - - bus_fsys2_opp_table: opp_table5 { - compatible = "operating-points-v2"; - opp00 { - opp-hz = /bits/ 64 <75000000>; - }; - opp01 { - opp-hz = /bits/ 64 <100000000>; - }; - opp02 { - opp-hz = /bits/ 64 <150000000>; + hsi2c_8: i2c@12E00000 { + compatible = "samsung,exynos5250-hsi2c"; + reg = <0x12E00000 0x1000>; + interrupts = <0 87 0>; + #address-cells = <1>; + #size-cells = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&i2c8_hs_bus>; + clocks = <&clock CLK_USI4>; + clock-names = "hsi2c"; + status = "disabled"; }; - }; - bus_mfc_opp_table: opp_table6 { - compatible = "operating-points-v2"; - - opp00 { - opp-hz = /bits/ 64 <96000000>; - }; - opp01 { - opp-hz = /bits/ 64 <111000000>; - }; - opp02 { - opp-hz = /bits/ 64 <167000000>; - }; - opp03 { - opp-hz = /bits/ 64 <222000000>; - }; - opp04 { - opp-hz = /bits/ 64 <333000000>; + hsi2c_9: i2c@12E10000 { + compatible = "samsung,exynos5250-hsi2c"; + reg = <0x12E10000 0x1000>; + interrupts = <0 88 0>; + #address-cells = <1>; + #size-cells = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&i2c9_hs_bus>; + clocks = <&clock CLK_USI5>; + clock-names = "hsi2c"; + status = "disabled"; }; - }; - bus_gen_opp_table: opp_table7 { - compatible = "operating-points-v2"; - - opp00 { - opp-hz = /bits/ 64 <89000000>; - }; - opp01 { - opp-hz = /bits/ 64 <133000000>; - }; - opp02 { - opp-hz = /bits/ 64 <178000000>; - }; - opp03 { - opp-hz = /bits/ 64 <267000000>; + hsi2c_10: i2c@12E20000 { + compatible = "samsung,exynos5250-hsi2c"; + reg = <0x12E20000 0x1000>; + interrupts = <0 203 0>; + #address-cells = <1>; + #size-cells = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&i2c10_hs_bus>; + clocks = <&clock CLK_USI6>; + clock-names = "hsi2c"; + status = "disabled"; }; - }; - - bus_peri_opp_table: opp_table8 { - compatible = "operating-points-v2"; - opp00 { - opp-hz = /bits/ 64 <67000000>; + hdmi: hdmi@14530000 { + compatible = "samsung,exynos5420-hdmi"; + reg = <0x14530000 0x70000>; + interrupts = <0 95 0>; + clocks = <&clock CLK_HDMI>, <&clock CLK_SCLK_HDMI>, + <&clock CLK_DOUT_PIXEL>, <&clock CLK_SCLK_HDMIPHY>, + <&clock CLK_MOUT_HDMI>; + clock-names = "hdmi", "sclk_hdmi", "sclk_pixel", + "sclk_hdmiphy", "mout_hdmi"; + phy = <&hdmiphy>; + samsung,syscon-phandle = <&pmu_system_controller>; + status = "disabled"; + power-domains = <&disp_pd>; + }; + + hdmiphy: hdmiphy@145D0000 { + reg = <0x145D0000 0x20>; + }; + + mixer: mixer@14450000 { + compatible = "samsung,exynos5420-mixer"; + reg = <0x14450000 0x10000>; + interrupts = <0 94 0>; + clocks = <&clock CLK_MIXER>, <&clock CLK_HDMI>, + <&clock CLK_SCLK_HDMI>; + clock-names = "mixer", "hdmi", "sclk_hdmi"; + power-domains = <&disp_pd>; + iommus = <&sysmmu_tv>; + }; + + rotator: rotator@11C00000 { + compatible = "samsung,exynos5250-rotator"; + reg = <0x11C00000 0x64>; + interrupts = <0 84 0>; + clocks = <&clock CLK_ROTATOR>; + clock-names = "rotator"; + iommus = <&sysmmu_rotator>; + }; + + gsc_0: video-scaler@13e00000 { + compatible = "samsung,exynos5-gsc"; + reg = <0x13e00000 0x1000>; + interrupts = <0 85 0>; + clocks = <&clock CLK_GSCL0>; + clock-names = "gscl"; + power-domains = <&gsc_pd>; + iommus = <&sysmmu_gscl0>; + }; + + gsc_1: video-scaler@13e10000 { + compatible = "samsung,exynos5-gsc"; + reg = <0x13e10000 0x1000>; + interrupts = <0 86 0>; + clocks = <&clock CLK_GSCL1>; + clock-names = "gscl"; + power-domains = <&gsc_pd>; + iommus = <&sysmmu_gscl1>; + }; + + jpeg_0: jpeg@11F50000 { + compatible = "samsung,exynos5420-jpeg"; + reg = <0x11F50000 0x1000>; + interrupts = <0 89 0>; + clock-names = "jpeg"; + clocks = <&clock CLK_JPEG>; + iommus = <&sysmmu_jpeg0>; + }; + + jpeg_1: jpeg@11F60000 { + compatible = "samsung,exynos5420-jpeg"; + reg = <0x11F60000 0x1000>; + interrupts = <0 168 0>; + clock-names = "jpeg"; + clocks = <&clock CLK_JPEG2>; + iommus = <&sysmmu_jpeg1>; + }; + + pmu_system_controller: system-controller@10040000 { + compatible = "samsung,exynos5420-pmu", "syscon"; + reg = <0x10040000 0x5000>; + clock-names = "clkout16"; + clocks = <&clock CLK_FIN_PLL>; + #clock-cells = <1>; + interrupt-controller; + #interrupt-cells = <3>; + interrupt-parent = <&gic>; }; - }; - - bus_g2d_opp_table: opp_table9 { - compatible = "operating-points-v2"; - opp00 { - opp-hz = /bits/ 64 <84000000>; - }; - opp01 { - opp-hz = /bits/ 64 <167000000>; - }; - opp02 { - opp-hz = /bits/ 64 <222000000>; - }; - opp03 { - opp-hz = /bits/ 64 <300000000>; - }; - opp04 { - opp-hz = /bits/ 64 <333000000>; + tmu_cpu0: tmu@10060000 { + compatible = "samsung,exynos5420-tmu"; + reg = <0x10060000 0x100>; + interrupts = <0 65 0>; + clocks = <&clock CLK_TMU>; + clock-names = "tmu_apbif"; + #include "exynos4412-tmu-sensor-conf.dtsi" + }; + + tmu_cpu1: tmu@10064000 { + compatible = "samsung,exynos5420-tmu"; + reg = <0x10064000 0x100>; + interrupts = <0 183 0>; + clocks = <&clock CLK_TMU>; + clock-names = "tmu_apbif"; + #include "exynos4412-tmu-sensor-conf.dtsi" + }; + + tmu_cpu2: tmu@10068000 { + compatible = "samsung,exynos5420-tmu-ext-triminfo"; + reg = <0x10068000 0x100>, <0x1006c000 0x4>; + interrupts = <0 184 0>; + clocks = <&clock CLK_TMU>, <&clock CLK_TMU>; + clock-names = "tmu_apbif", "tmu_triminfo_apbif"; + #include "exynos4412-tmu-sensor-conf.dtsi" + }; + + tmu_cpu3: tmu@1006c000 { + compatible = "samsung,exynos5420-tmu-ext-triminfo"; + reg = <0x1006c000 0x100>, <0x100a0000 0x4>; + interrupts = <0 185 0>; + clocks = <&clock CLK_TMU>, <&clock CLK_TMU_GPU>; + clock-names = "tmu_apbif", "tmu_triminfo_apbif"; + #include "exynos4412-tmu-sensor-conf.dtsi" + }; + + tmu_gpu: tmu@100a0000 { + compatible = "samsung,exynos5420-tmu-ext-triminfo"; + reg = <0x100a0000 0x100>, <0x10068000 0x4>; + interrupts = <0 215 0>; + clocks = <&clock CLK_TMU_GPU>, <&clock CLK_TMU>; + clock-names = "tmu_apbif", "tmu_triminfo_apbif"; + #include "exynos4412-tmu-sensor-conf.dtsi" + }; + + sysmmu_g2dr: sysmmu@0x10A60000 { + compatible = "samsung,exynos-sysmmu"; + reg = <0x10A60000 0x1000>; + interrupt-parent = <&combiner>; + interrupts = <24 5>; + clock-names = "sysmmu", "master"; + clocks = <&clock CLK_SMMU_G2D>, <&clock CLK_G2D>; + #iommu-cells = <0>; + }; + + sysmmu_g2dw: sysmmu@0x10A70000 { + compatible = "samsung,exynos-sysmmu"; + reg = <0x10A70000 0x1000>; + interrupt-parent = <&combiner>; + interrupts = <22 2>; + clock-names = "sysmmu", "master"; + clocks = <&clock CLK_SMMU_G2D>, <&clock CLK_G2D>; + #iommu-cells = <0>; + }; + + sysmmu_tv: sysmmu@0x14650000 { + compatible = "samsung,exynos-sysmmu"; + reg = <0x14650000 0x1000>; + interrupt-parent = <&combiner>; + interrupts = <7 4>; + clock-names = "sysmmu", "master"; + clocks = <&clock CLK_SMMU_MIXER>, <&clock CLK_MIXER>; + power-domains = <&disp_pd>; + #iommu-cells = <0>; + }; + + sysmmu_gscl0: sysmmu@0x13E80000 { + compatible = "samsung,exynos-sysmmu"; + reg = <0x13E80000 0x1000>; + interrupt-parent = <&combiner>; + interrupts = <2 0>; + clock-names = "sysmmu", "master"; + clocks = <&clock CLK_SMMU_GSCL0>, <&clock CLK_GSCL0>; + power-domains = <&gsc_pd>; + #iommu-cells = <0>; + }; + + sysmmu_gscl1: sysmmu@0x13E90000 { + compatible = "samsung,exynos-sysmmu"; + reg = <0x13E90000 0x1000>; + interrupt-parent = <&combiner>; + interrupts = <2 2>; + clock-names = "sysmmu", "master"; + clocks = <&clock CLK_SMMU_GSCL1>, <&clock CLK_GSCL1>; + power-domains = <&gsc_pd>; + #iommu-cells = <0>; + }; + + sysmmu_scaler0r: sysmmu@0x12880000 { + compatible = "samsung,exynos-sysmmu"; + reg = <0x12880000 0x1000>; + interrupt-parent = <&combiner>; + interrupts = <22 4>; + clock-names = "sysmmu", "master"; + clocks = <&clock CLK_SMMU_MSCL0>, <&clock CLK_MSCL0>; + #iommu-cells = <0>; + }; + + sysmmu_scaler1r: sysmmu@0x12890000 { + compatible = "samsung,exynos-sysmmu"; + reg = <0x12890000 0x1000>; + interrupts = <0 186 0>; + clock-names = "sysmmu", "master"; + clocks = <&clock CLK_SMMU_MSCL1>, <&clock CLK_MSCL1>; + #iommu-cells = <0>; + }; + + sysmmu_scaler2r: sysmmu@0x128A0000 { + compatible = "samsung,exynos-sysmmu"; + reg = <0x128A0000 0x1000>; + interrupts = <0 188 0>; + clock-names = "sysmmu", "master"; + clocks = <&clock CLK_SMMU_MSCL2>, <&clock CLK_MSCL2>; + #iommu-cells = <0>; + }; + + sysmmu_scaler0w: sysmmu@0x128C0000 { + compatible = "samsung,exynos-sysmmu"; + reg = <0x128C0000 0x1000>; + interrupt-parent = <&combiner>; + interrupts = <27 2>; + clock-names = "sysmmu", "master"; + clocks = <&clock CLK_SMMU_MSCL0>, <&clock CLK_MSCL0>; + #iommu-cells = <0>; + }; + + sysmmu_scaler1w: sysmmu@0x128D0000 { + compatible = "samsung,exynos-sysmmu"; + reg = <0x128D0000 0x1000>; + interrupt-parent = <&combiner>; + interrupts = <22 6>; + clock-names = "sysmmu", "master"; + clocks = <&clock CLK_SMMU_MSCL1>, <&clock CLK_MSCL1>; + #iommu-cells = <0>; + }; + + sysmmu_scaler2w: sysmmu@0x128E0000 { + compatible = "samsung,exynos-sysmmu"; + reg = <0x128E0000 0x1000>; + interrupt-parent = <&combiner>; + interrupts = <19 6>; + clock-names = "sysmmu", "master"; + clocks = <&clock CLK_SMMU_MSCL2>, <&clock CLK_MSCL2>; + #iommu-cells = <0>; + }; + + sysmmu_rotator: sysmmu@0x11D40000 { + compatible = "samsung,exynos-sysmmu"; + reg = <0x11D40000 0x1000>; + interrupt-parent = <&combiner>; + interrupts = <4 0>; + clock-names = "sysmmu", "master"; + clocks = <&clock CLK_SMMU_ROTATOR>, <&clock CLK_ROTATOR>; + #iommu-cells = <0>; + }; + + sysmmu_jpeg0: sysmmu@0x11F10000 { + compatible = "samsung,exynos-sysmmu"; + reg = <0x11F10000 0x1000>; + interrupt-parent = <&combiner>; + interrupts = <4 2>; + clock-names = "sysmmu", "master"; + clocks = <&clock CLK_SMMU_JPEG>, <&clock CLK_JPEG>; + #iommu-cells = <0>; + }; + + sysmmu_jpeg1: sysmmu@0x11F20000 { + compatible = "samsung,exynos-sysmmu"; + reg = <0x11F20000 0x1000>; + interrupts = <0 169 0>; + clock-names = "sysmmu", "master"; + clocks = <&clock CLK_SMMU_JPEG2>, <&clock CLK_JPEG2>; + #iommu-cells = <0>; + }; + + sysmmu_mfc_l: sysmmu@0x11200000 { + compatible = "samsung,exynos-sysmmu"; + reg = <0x11200000 0x1000>; + interrupt-parent = <&combiner>; + interrupts = <6 2>; + clock-names = "sysmmu", "master"; + clocks = <&clock CLK_SMMU_MFCL>, <&clock CLK_MFC>; + power-domains = <&mfc_pd>; + #iommu-cells = <0>; + }; + + sysmmu_mfc_r: sysmmu@0x11210000 { + compatible = "samsung,exynos-sysmmu"; + reg = <0x11210000 0x1000>; + interrupt-parent = <&combiner>; + interrupts = <8 5>; + clock-names = "sysmmu", "master"; + clocks = <&clock CLK_SMMU_MFCR>, <&clock CLK_MFC>; + power-domains = <&mfc_pd>; + #iommu-cells = <0>; + }; + + sysmmu_fimd1_0: sysmmu@0x14640000 { + compatible = "samsung,exynos-sysmmu"; + reg = <0x14640000 0x1000>; + interrupt-parent = <&combiner>; + interrupts = <3 2>; + clock-names = "sysmmu", "master"; + clocks = <&clock CLK_SMMU_FIMD1M0>, <&clock CLK_FIMD1>; + power-domains = <&disp_pd>; + #iommu-cells = <0>; + }; + + sysmmu_fimd1_1: sysmmu@0x14680000 { + compatible = "samsung,exynos-sysmmu"; + reg = <0x14680000 0x1000>; + interrupt-parent = <&combiner>; + interrupts = <3 0>; + clock-names = "sysmmu", "master"; + clocks = <&clock CLK_SMMU_FIMD1M1>, <&clock CLK_FIMD1>; + power-domains = <&disp_pd>; + #iommu-cells = <0>; + }; + + bus_wcore: bus_wcore { + compatible = "samsung,exynos-bus"; + clocks = <&clock CLK_DOUT_ACLK400_WCORE>; + clock-names = "bus"; + operating-points-v2 = <&bus_wcore_opp_table>; + status = "disabled"; }; - }; - - bus_g2d_acp_opp_table: opp_table10 { - compatible = "operating-points-v2"; - opp00 { - opp-hz = /bits/ 64 <67000000>; - }; - opp01 { - opp-hz = /bits/ 64 <133000000>; - }; - opp02 { - opp-hz = /bits/ 64 <178000000>; - }; - opp03 { - opp-hz = /bits/ 64 <267000000>; + bus_noc: bus_noc { + compatible = "samsung,exynos-bus"; + clocks = <&clock CLK_DOUT_ACLK100_NOC>; + clock-names = "bus"; + operating-points-v2 = <&bus_noc_opp_table>; + status = "disabled"; }; - }; - - bus_jpeg_opp_table: opp_table11 { - compatible = "operating-points-v2"; - opp00 { - opp-hz = /bits/ 64 <75000000>; - }; - opp01 { - opp-hz = /bits/ 64 <150000000>; - }; - opp02 { - opp-hz = /bits/ 64 <200000000>; - }; - opp03 { - opp-hz = /bits/ 64 <300000000>; + bus_fsys_apb: bus_fsys_apb { + compatible = "samsung,exynos-bus"; + clocks = <&clock CLK_DOUT_PCLK200_FSYS>; + clock-names = "bus"; + operating-points-v2 = <&bus_fsys_apb_opp_table>; + status = "disabled"; }; - }; - - bus_jpeg_apb_opp_table: opp_table12 { - compatible = "operating-points-v2"; - opp00 { - opp-hz = /bits/ 64 <84000000>; - }; - opp01 { - opp-hz = /bits/ 64 <111000000>; + bus_fsys: bus_fsys { + compatible = "samsung,exynos-bus"; + clocks = <&clock CLK_DOUT_ACLK200_FSYS>; + clock-names = "bus"; + operating-points-v2 = <&bus_fsys_apb_opp_table>; + status = "disabled"; }; - opp02 { - opp-hz = /bits/ 64 <134000000>; + + bus_fsys2: bus_fsys2 { + compatible = "samsung,exynos-bus"; + clocks = <&clock CLK_DOUT_ACLK200_FSYS2>; + clock-names = "bus"; + operating-points-v2 = <&bus_fsys2_opp_table>; + status = "disabled"; }; - opp03 { - opp-hz = /bits/ 64 <167000000>; + + bus_mfc: bus_mfc { + compatible = "samsung,exynos-bus"; + clocks = <&clock CLK_DOUT_ACLK333>; + clock-names = "bus"; + operating-points-v2 = <&bus_mfc_opp_table>; + status = "disabled"; }; - }; - bus_disp1_fimd_opp_table: opp_table13 { - compatible = "operating-points-v2"; + bus_gen: bus_gen { + compatible = "samsung,exynos-bus"; + clocks = <&clock CLK_DOUT_ACLK266>; + clock-names = "bus"; + operating-points-v2 = <&bus_gen_opp_table>; + status = "disabled"; + }; - opp00 { - opp-hz = /bits/ 64 <120000000>; + bus_peri: bus_peri { + compatible = "samsung,exynos-bus"; + clocks = <&clock CLK_DOUT_ACLK66>; + clock-names = "bus"; + operating-points-v2 = <&bus_peri_opp_table>; + status = "disabled"; }; - opp01 { - opp-hz = /bits/ 64 <200000000>; + + bus_g2d: bus_g2d { + compatible = "samsung,exynos-bus"; + clocks = <&clock CLK_DOUT_ACLK333_G2D>; + clock-names = "bus"; + operating-points-v2 = <&bus_g2d_opp_table>; + status = "disabled"; }; - }; - bus_disp1_opp_table: opp_table14 { - compatible = "operating-points-v2"; + bus_g2d_acp: bus_g2d_acp { + compatible = "samsung,exynos-bus"; + clocks = <&clock CLK_DOUT_ACLK266_G2D>; + clock-names = "bus"; + operating-points-v2 = <&bus_g2d_acp_opp_table>; + status = "disabled"; + }; - opp00 { - opp-hz = /bits/ 64 <120000000>; + bus_jpeg: bus_jpeg { + compatible = "samsung,exynos-bus"; + clocks = <&clock CLK_DOUT_ACLK300_JPEG>; + clock-names = "bus"; + operating-points-v2 = <&bus_jpeg_opp_table>; + status = "disabled"; }; - opp01 { - opp-hz = /bits/ 64 <200000000>; + + bus_jpeg_apb: bus_jpeg_apb { + compatible = "samsung,exynos-bus"; + clocks = <&clock CLK_DOUT_ACLK166>; + clock-names = "bus"; + operating-points-v2 = <&bus_jpeg_apb_opp_table>; + status = "disabled"; }; - opp02 { - opp-hz = /bits/ 64 <300000000>; + + bus_disp1_fimd: bus_disp1_fimd { + compatible = "samsung,exynos-bus"; + clocks = <&clock CLK_DOUT_ACLK300_DISP1>; + clock-names = "bus"; + operating-points-v2 = <&bus_disp1_fimd_opp_table>; + status = "disabled"; }; - }; - bus_gscl_opp_table: opp_table15 { - compatible = "operating-points-v2"; + bus_disp1: bus_disp1 { + compatible = "samsung,exynos-bus"; + clocks = <&clock CLK_DOUT_ACLK400_DISP1>; + clock-names = "bus"; + operating-points-v2 = <&bus_disp1_opp_table>; + status = "disabled"; + }; - opp00 { - opp-hz = /bits/ 64 <150000000>; + bus_gscl_scaler: bus_gscl_scaler { + compatible = "samsung,exynos-bus"; + clocks = <&clock CLK_DOUT_ACLK300_GSCL>; + clock-names = "bus"; + operating-points-v2 = <&bus_gscl_opp_table>; + status = "disabled"; }; - opp01 { - opp-hz = /bits/ 64 <200000000>; + + bus_mscl: bus_mscl { + compatible = "samsung,exynos-bus"; + clocks = <&clock CLK_DOUT_ACLK400_MSCL>; + clock-names = "bus"; + operating-points-v2 = <&bus_mscl_opp_table>; + status = "disabled"; }; - opp02 { - opp-hz = /bits/ 64 <300000000>; + + bus_wcore_opp_table: opp_table2 { + compatible = "operating-points-v2"; + + opp00 { + opp-hz = /bits/ 64 <84000000>; + opp-microvolt = <925000>; + }; + opp01 { + opp-hz = /bits/ 64 <111000000>; + opp-microvolt = <950000>; + }; + opp02 { + opp-hz = /bits/ 64 <222000000>; + opp-microvolt = <950000>; + }; + opp03 { + opp-hz = /bits/ 64 <333000000>; + opp-microvolt = <950000>; + }; + opp04 { + opp-hz = /bits/ 64 <400000000>; + opp-microvolt = <987500>; + }; + }; + + bus_noc_opp_table: opp_table3 { + compatible = "operating-points-v2"; + + opp00 { + opp-hz = /bits/ 64 <67000000>; + }; + opp01 { + opp-hz = /bits/ 64 <75000000>; + }; + opp02 { + opp-hz = /bits/ 64 <86000000>; + }; + opp03 { + opp-hz = /bits/ 64 <100000000>; + }; + }; + + bus_fsys_apb_opp_table: opp_table4 { + compatible = "operating-points-v2"; + opp-shared; + + opp00 { + opp-hz = /bits/ 64 <100000000>; + }; + opp01 { + opp-hz = /bits/ 64 <200000000>; + }; + }; + + bus_fsys2_opp_table: opp_table5 { + compatible = "operating-points-v2"; + + opp00 { + opp-hz = /bits/ 64 <75000000>; + }; + opp01 { + opp-hz = /bits/ 64 <100000000>; + }; + opp02 { + opp-hz = /bits/ 64 <150000000>; + }; + }; + + bus_mfc_opp_table: opp_table6 { + compatible = "operating-points-v2"; + + opp00 { + opp-hz = /bits/ 64 <96000000>; + }; + opp01 { + opp-hz = /bits/ 64 <111000000>; + }; + opp02 { + opp-hz = /bits/ 64 <167000000>; + }; + opp03 { + opp-hz = /bits/ 64 <222000000>; + }; + opp04 { + opp-hz = /bits/ 64 <333000000>; + }; + }; + + bus_gen_opp_table: opp_table7 { + compatible = "operating-points-v2"; + + opp00 { + opp-hz = /bits/ 64 <89000000>; + }; + opp01 { + opp-hz = /bits/ 64 <133000000>; + }; + opp02 { + opp-hz = /bits/ 64 <178000000>; + }; + opp03 { + opp-hz = /bits/ 64 <267000000>; + }; + }; + + bus_peri_opp_table: opp_table8 { + compatible = "operating-points-v2"; + + opp00 { + opp-hz = /bits/ 64 <67000000>; + }; + }; + + bus_g2d_opp_table: opp_table9 { + compatible = "operating-points-v2"; + + opp00 { + opp-hz = /bits/ 64 <84000000>; + }; + opp01 { + opp-hz = /bits/ 64 <167000000>; + }; + opp02 { + opp-hz = /bits/ 64 <222000000>; + }; + opp03 { + opp-hz = /bits/ 64 <300000000>; + }; + opp04 { + opp-hz = /bits/ 64 <333000000>; + }; + }; + + bus_g2d_acp_opp_table: opp_table10 { + compatible = "operating-points-v2"; + + opp00 { + opp-hz = /bits/ 64 <67000000>; + }; + opp01 { + opp-hz = /bits/ 64 <133000000>; + }; + opp02 { + opp-hz = /bits/ 64 <178000000>; + }; + opp03 { + opp-hz = /bits/ 64 <267000000>; + }; + }; + + bus_jpeg_opp_table: opp_table11 { + compatible = "operating-points-v2"; + + opp00 { + opp-hz = /bits/ 64 <75000000>; + }; + opp01 { + opp-hz = /bits/ 64 <150000000>; + }; + opp02 { + opp-hz = /bits/ 64 <200000000>; + }; + opp03 { + opp-hz = /bits/ 64 <300000000>; + }; + }; + + bus_jpeg_apb_opp_table: opp_table12 { + compatible = "operating-points-v2"; + + opp00 { + opp-hz = /bits/ 64 <84000000>; + }; + opp01 { + opp-hz = /bits/ 64 <111000000>; + }; + opp02 { + opp-hz = /bits/ 64 <134000000>; + }; + opp03 { + opp-hz = /bits/ 64 <167000000>; + }; + }; + + bus_disp1_fimd_opp_table: opp_table13 { + compatible = "operating-points-v2"; + + opp00 { + opp-hz = /bits/ 64 <120000000>; + }; + opp01 { + opp-hz = /bits/ 64 <200000000>; + }; + }; + + bus_disp1_opp_table: opp_table14 { + compatible = "operating-points-v2"; + + opp00 { + opp-hz = /bits/ 64 <120000000>; + }; + opp01 { + opp-hz = /bits/ 64 <200000000>; + }; + opp02 { + opp-hz = /bits/ 64 <300000000>; + }; + }; + + bus_gscl_opp_table: opp_table15 { + compatible = "operating-points-v2"; + + opp00 { + opp-hz = /bits/ 64 <150000000>; + }; + opp01 { + opp-hz = /bits/ 64 <200000000>; + }; + opp02 { + opp-hz = /bits/ 64 <300000000>; + }; + }; + + bus_mscl_opp_table: opp_table16 { + compatible = "operating-points-v2"; + + opp00 { + opp-hz = /bits/ 64 <84000000>; + }; + opp01 { + opp-hz = /bits/ 64 <167000000>; + }; + opp02 { + opp-hz = /bits/ 64 <222000000>; + }; + opp03 { + opp-hz = /bits/ 64 <333000000>; + }; + opp04 { + opp-hz = /bits/ 64 <400000000>; + }; }; }; - bus_mscl_opp_table: opp_table16 { - compatible = "operating-points-v2"; - - opp00 { - opp-hz = /bits/ 64 <84000000>; + thermal-zones { + cpu0_thermal: cpu0-thermal { + thermal-sensors = <&tmu_cpu0>; + #include "exynos5420-trip-points.dtsi" }; - opp01 { - opp-hz = /bits/ 64 <167000000>; + cpu1_thermal: cpu1-thermal { + thermal-sensors = <&tmu_cpu1>; + #include "exynos5420-trip-points.dtsi" }; - opp02 { - opp-hz = /bits/ 64 <222000000>; + cpu2_thermal: cpu2-thermal { + thermal-sensors = <&tmu_cpu2>; + #include "exynos5420-trip-points.dtsi" }; - opp03 { - opp-hz = /bits/ 64 <333000000>; + cpu3_thermal: cpu3-thermal { + thermal-sensors = <&tmu_cpu3>; + #include "exynos5420-trip-points.dtsi" }; - opp04 { - opp-hz = /bits/ 64 <400000000>; + gpu_thermal: gpu-thermal { + thermal-sensors = <&tmu_gpu>; + #include "exynos5420-trip-points.dtsi" }; }; }; @@ -1614,6 +1330,72 @@ iommu-names = "m0", "m1"; }; +&i2c_0 { + clocks = <&clock CLK_I2C0>; + clock-names = "i2c"; + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_bus>; +}; + +&i2c_1 { + clocks = <&clock CLK_I2C1>; + clock-names = "i2c"; + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_bus>; +}; + +&i2c_2 { + clocks = <&clock CLK_I2C2>; + clock-names = "i2c"; + pinctrl-names = "default"; + pinctrl-0 = <&i2c2_bus>; +}; + +&i2c_3 { + clocks = <&clock CLK_I2C3>; + clock-names = "i2c"; + pinctrl-names = "default"; + pinctrl-0 = <&i2c3_bus>; +}; + +&hsi2c_4 { + clocks = <&clock CLK_USI0>; + clock-names = "hsi2c"; + pinctrl-names = "default"; + pinctrl-0 = <&i2c4_hs_bus>; +}; + +&hsi2c_5 { + clocks = <&clock CLK_USI1>; + clock-names = "hsi2c"; + pinctrl-names = "default"; + pinctrl-0 = <&i2c5_hs_bus>; +}; + +&hsi2c_6 { + clocks = <&clock CLK_USI2>; + clock-names = "hsi2c"; + pinctrl-names = "default"; + pinctrl-0 = <&i2c6_hs_bus>; +}; + +&hsi2c_7 { + clocks = <&clock CLK_USI3>; + clock-names = "hsi2c"; + pinctrl-names = "default"; + pinctrl-0 = <&i2c7_hs_bus>; +}; + +&mct { + clocks = <&clock CLK_FIN_PLL>, <&clock CLK_MCT>; + clock-names = "fin_pll", "mct"; +}; + +&pwm { + clocks = <&clock CLK_PWM>; + clock-names = "timers"; +}; + &rtc { clocks = <&clock CLK_RTC>; clock-names = "rtc"; @@ -1641,4 +1423,58 @@ clock-names = "uart", "clk_uart_baud0"; }; +&sss { + clocks = <&clock CLK_SSS>; + clock-names = "secss"; +}; + +&usbdrd3_0 { + clocks = <&clock CLK_USBD300>; + clock-names = "usbdrd30"; +}; + +&usbdrd_phy0 { + clocks = <&clock CLK_USBD300>, <&clock CLK_SCLK_USBPHY300>; + clock-names = "phy", "ref"; + samsung,pmu-syscon = <&pmu_system_controller>; +}; + +&usbdrd3_1 { + clocks = <&clock CLK_USBD301>; + clock-names = "usbdrd30"; +}; + +&usbdrd_dwc3_1 { + interrupts = <GIC_SPI 73 0>; +}; + +&usbdrd_phy1 { + clocks = <&clock CLK_USBD301>, <&clock CLK_SCLK_USBPHY301>; + clock-names = "phy", "ref"; + samsung,pmu-syscon = <&pmu_system_controller>; +}; + +&usbhost1 { + clocks = <&clock CLK_USBH20>; + clock-names = "usbhost"; +}; + +&usbhost2 { + clocks = <&clock CLK_USBH20>; + clock-names = "usbhost"; +}; + +&usb2_phy { + clocks = <&clock CLK_USBH20>, <&clock CLK_SCLK_USBPHY300>; + clock-names = "phy", "ref"; + samsung,sysreg-phandle = <&sysreg_system_controller>; + samsung,pmureg-phandle = <&pmu_system_controller>; +}; + +&watchdog { + clocks = <&clock CLK_WDT>; + clock-names = "watchdog"; + samsung,syscon-phandle = <&pmu_system_controller>; +}; + #include "exynos5420-pinctrl.dtsi" diff --git a/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi b/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi index 2a4e10bc8..d56253049 100644 --- a/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi +++ b/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi @@ -1,9 +1,11 @@ /* * Hardkernel Odroid XU3 board device tree source * - * Copyright (c) 2014 Collabora Ltd. * Copyright (c) 2013 Samsung Electronics Co., Ltd. * http://www.samsung.com + * Copyright (c) 2014 Collabora Ltd. + * Copyright (c) 2015 Lukasz Majewski <l.majewski@samsung.com> + * Anand Moon <linux.amoon@gmail.com> * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as @@ -16,7 +18,7 @@ #include <dt-bindings/sound/samsung-i2s.h> #include "exynos5800.dtsi" #include "exynos5422-cpus.dtsi" -#include "exynos5422-cpu-thermal.dtsi" +#include "exynos-mfc-reserved-memory.dtsi" / { memory { @@ -54,6 +56,94 @@ #cooling-cells = <2>; cooling-levels = <0 130 170 230>; }; + + thermal-zones { + cpu0_thermal: cpu0-thermal { + thermal-sensors = <&tmu_cpu0 0>; + polling-delay-passive = <250>; + polling-delay = <0>; + trips { + cpu_alert0: cpu-alert-0 { + temperature = <50000>; /* millicelsius */ + hysteresis = <5000>; /* millicelsius */ + type = "active"; + }; + cpu_alert1: cpu-alert-1 { + temperature = <60000>; /* millicelsius */ + hysteresis = <5000>; /* millicelsius */ + type = "active"; + }; + cpu_alert2: cpu-alert-2 { + temperature = <70000>; /* millicelsius */ + hysteresis = <5000>; /* millicelsius */ + type = "active"; + }; + cpu_crit0: cpu-crit-0 { + temperature = <120000>; /* millicelsius */ + hysteresis = <0>; /* millicelsius */ + type = "critical"; + }; + /* + * Exynos542x supports only 4 trip-points + * so for these polling mode is required. + * Start polling at temperature level of last + * interrupt-driven trip: cpu_alert2 + */ + cpu_alert3: cpu-alert-3 { + temperature = <70000>; /* millicelsius */ + hysteresis = <10000>; /* millicelsius */ + type = "passive"; + }; + cpu_alert4: cpu-alert-4 { + temperature = <85000>; /* millicelsius */ + hysteresis = <10000>; /* millicelsius */ + type = "passive"; + }; + + }; + cooling-maps { + map0 { + trip = <&cpu_alert0>; + cooling-device = <&fan0 0 1>; + }; + map1 { + trip = <&cpu_alert1>; + cooling-device = <&fan0 1 2>; + }; + map2 { + trip = <&cpu_alert2>; + cooling-device = <&fan0 2 3>; + }; + /* + * When reaching cpu_alert3, reduce CPU + * by 2 steps. On Exynos5422/5800 that would + * be: 1600 MHz and 1100 MHz. + */ + map3 { + trip = <&cpu_alert3>; + cooling-device = <&cpu0 0 2>; + }; + map4 { + trip = <&cpu_alert3>; + cooling-device = <&cpu4 0 2>; + }; + + /* + * When reaching cpu_alert4, reduce CPU + * further, down to 600 MHz (11 steps for big, + * 7 steps for LITTLE). + */ + map5 { + trip = <&cpu_alert4>; + cooling-device = <&cpu0 3 7>; + }; + map6 { + trip = <&cpu_alert4>; + cooling-device = <&cpu4 3 11>; + }; + }; + }; + }; }; &bus_wcore { @@ -405,11 +495,6 @@ }; }; -&mfc { - samsung,mfc-r = <0x43000000 0x800000>; - samsung,mfc-l = <0x51000000 0x800000>; -}; - &mmc_0 { status = "okay"; mmc-pwrseq = <&emmc_pwrseq>; @@ -487,27 +572,22 @@ &tmu_cpu0 { vtmu-supply = <&ldo7_reg>; - status = "okay"; }; &tmu_cpu1 { vtmu-supply = <&ldo7_reg>; - status = "okay"; }; &tmu_cpu2 { vtmu-supply = <&ldo7_reg>; - status = "okay"; }; &tmu_cpu3 { vtmu-supply = <&ldo7_reg>; - status = "okay"; }; &tmu_gpu { vtmu-supply = <&ldo7_reg>; - status = "okay"; }; &rtc { diff --git a/arch/arm/boot/dts/exynos5422-odroidxu3-lite.dts b/arch/arm/boot/dts/exynos5422-odroidxu3-lite.dts index 2ae1cf41d..03fa88c45 100644 --- a/arch/arm/boot/dts/exynos5422-odroidxu3-lite.dts +++ b/arch/arm/boot/dts/exynos5422-odroidxu3-lite.dts @@ -14,44 +14,11 @@ /dts-v1/; #include "exynos5422-odroidxu3-common.dtsi" #include "exynos5422-odroidxu3-audio.dtsi" +#include "exynos54xx-odroidxu-leds.dtsi" / { model = "Hardkernel Odroid XU3 Lite"; compatible = "hardkernel,odroid-xu3-lite", "samsung,exynos5800", "samsung,exynos5"; - - pwmleds { - compatible = "pwm-leds"; - - greenled { - label = "green:mmc0"; - pwms = <&pwm 1 2000000 0>; - pwm-names = "pwm1"; - /* - * Green LED is much brighter than the others - * so limit its max brightness - */ - max_brightness = <127>; - linux,default-trigger = "mmc0"; - }; - - blueled { - label = "blue:heartbeat"; - pwms = <&pwm 2 2000000 0>; - pwm-names = "pwm2"; - max_brightness = <255>; - linux,default-trigger = "heartbeat"; - }; - }; - - gpioleds { - compatible = "gpio-leds"; - redled { - label = "red:microSD"; - gpios = <&gpx2 3 GPIO_ACTIVE_HIGH>; - default-state = "off"; - linux,default-trigger = "mmc1"; - }; - }; }; &pwm { diff --git a/arch/arm/boot/dts/exynos5422-odroidxu3.dts b/arch/arm/boot/dts/exynos5422-odroidxu3.dts index 432406db8..9ed6564ac 100644 --- a/arch/arm/boot/dts/exynos5422-odroidxu3.dts +++ b/arch/arm/boot/dts/exynos5422-odroidxu3.dts @@ -13,44 +13,11 @@ /dts-v1/; #include "exynos5422-odroidxu3-common.dtsi" #include "exynos5422-odroidxu3-audio.dtsi" +#include "exynos54xx-odroidxu-leds.dtsi" / { model = "Hardkernel Odroid XU3"; compatible = "hardkernel,odroid-xu3", "samsung,exynos5800", "samsung,exynos5"; - - pwmleds { - compatible = "pwm-leds"; - - greenled { - label = "green:mmc0"; - pwms = <&pwm 1 2000000 0>; - pwm-names = "pwm1"; - /* - * Green LED is much brighter than the others - * so limit its max brightness - */ - max_brightness = <127>; - linux,default-trigger = "mmc0"; - }; - - blueled { - label = "blue:heartbeat"; - pwms = <&pwm 2 2000000 0>; - pwm-names = "pwm2"; - max_brightness = <255>; - linux,default-trigger = "heartbeat"; - }; - }; - - gpioleds { - compatible = "gpio-leds"; - redled { - label = "red:microSD"; - gpios = <&gpx2 3 GPIO_ACTIVE_HIGH>; - default-state = "off"; - linux,default-trigger = "mmc1"; - }; - }; }; &i2c_0 { diff --git a/arch/arm/boot/dts/exynos54xx-odroidxu-leds.dtsi b/arch/arm/boot/dts/exynos54xx-odroidxu-leds.dtsi new file mode 100644 index 000000000..0ed302066 --- /dev/null +++ b/arch/arm/boot/dts/exynos54xx-odroidxu-leds.dtsi @@ -0,0 +1,50 @@ +/* + * Hardkernel Odroid XU/XU3 LED device tree source + * + * Copyright (c) 2015,2016 Krzysztof Kozlowski + * Copyright (c) 2014 Collabora Ltd. + * Copyright (c) 2013 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include <dt-bindings/gpio/gpio.h> + +/ { + pwmleds { + compatible = "pwm-leds"; + + greenled { + label = "green:mmc0"; + pwms = <&pwm 1 2000000 0>; + pwm-names = "pwm1"; + /* + * Green LED is much brighter than the others + * so limit its max brightness + */ + max_brightness = <127>; + linux,default-trigger = "mmc0"; + }; + + blueled { + label = "blue:heartbeat"; + pwms = <&pwm 2 2000000 0>; + pwm-names = "pwm2"; + max_brightness = <255>; + linux,default-trigger = "heartbeat"; + }; + }; + + gpioleds { + compatible = "gpio-leds"; + redled { + label = "red:microSD"; + gpios = <&gpx2 3 GPIO_ACTIVE_HIGH>; + default-state = "off"; + linux,default-trigger = "mmc1"; + }; + }; +}; diff --git a/arch/arm/boot/dts/exynos54xx.dtsi b/arch/arm/boot/dts/exynos54xx.dtsi new file mode 100644 index 000000000..06a604911 --- /dev/null +++ b/arch/arm/boot/dts/exynos54xx.dtsi @@ -0,0 +1,199 @@ +/* + * Samsung's Exynos54xx SoC series common device tree source + * + * Copyright (c) 2012-2013 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * Copyright (c) 2016 Krzysztof Kozlowski + * + * Device nodes common for Samsung Exynos5410/5420/5422/5800. Specific + * Exynos 54xx SoCs should include this file and customize it further + * (e.g. with clocks). + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include "skeleton.dtsi" +#include "exynos5.dtsi" + +/ { + compatible = "samsung,exynos5"; + + aliases { + i2c4 = &hsi2c_4; + i2c5 = &hsi2c_5; + i2c6 = &hsi2c_6; + i2c7 = &hsi2c_7; + usbdrdphy0 = &usbdrd_phy0; + usbdrdphy1 = &usbdrd_phy1; + }; + + soc: soc { + sysram@02020000 { + compatible = "mmio-sram"; + reg = <0x02020000 0x54000>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x02020000 0x54000>; + + smp-sysram@0 { + compatible = "samsung,exynos4210-sysram"; + reg = <0x0 0x1000>; + }; + + smp-sysram@53000 { + compatible = "samsung,exynos4210-sysram-ns"; + reg = <0x53000 0x1000>; + }; + }; + + mct: mct@101c0000 { + compatible = "samsung,exynos4210-mct"; + reg = <0x101c0000 0xb00>; + interrupt-parent = <&mct_map>; + interrupts = <0>, <1>, <2>, <3>, <4>, <5>, <6>, <7>, + <8>, <9>, <10>, <11>; + + mct_map: mct-map { + #interrupt-cells = <1>; + #address-cells = <0>; + #size-cells = <0>; + interrupt-map = <0 &combiner 23 3>, + <1 &combiner 23 4>, + <2 &combiner 25 2>, + <3 &combiner 25 3>, + <4 &gic 0 120 0>, + <5 &gic 0 121 0>, + <6 &gic 0 122 0>, + <7 &gic 0 123 0>, + <8 &gic 0 128 0>, + <9 &gic 0 129 0>, + <10 &gic 0 130 0>, + <11 &gic 0 131 0>; + }; + }; + + watchdog: watchdog@101d0000 { + compatible = "samsung,exynos5420-wdt"; + reg = <0x101d0000 0x100>; + interrupts = <0 42 0>; + }; + + sss: sss@10830000 { + compatible = "samsung,exynos4210-secss"; + reg = <0x10830000 0x300>; + interrupts = <0 112 0>; + }; + + /* i2c_0-3 are defined in exynos5.dtsi */ + hsi2c_4: i2c@12ca0000 { + compatible = "samsung,exynos5250-hsi2c"; + reg = <0x12ca0000 0x1000>; + interrupts = <0 60 0>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + hsi2c_5: i2c@12cb0000 { + compatible = "samsung,exynos5250-hsi2c"; + reg = <0x12cb0000 0x1000>; + interrupts = <0 61 0>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + hsi2c_6: i2c@12cc0000 { + compatible = "samsung,exynos5250-hsi2c"; + reg = <0x12cc0000 0x1000>; + interrupts = <0 62 0>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + hsi2c_7: i2c@12cd0000 { + compatible = "samsung,exynos5250-hsi2c"; + reg = <0x12cd0000 0x1000>; + interrupts = <0 63 0>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + usbdrd3_0: usb3-0 { + compatible = "samsung,exynos5250-dwusb3"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + usbdrd_dwc3_0: dwc3@12000000 { + compatible = "snps,dwc3"; + reg = <0x12000000 0x10000>; + interrupts = <0 72 0>; + phys = <&usbdrd_phy0 0>, <&usbdrd_phy0 1>; + phy-names = "usb2-phy", "usb3-phy"; + }; + }; + + usbdrd_phy0: phy@12100000 { + compatible = "samsung,exynos5420-usbdrd-phy"; + reg = <0x12100000 0x100>; + #phy-cells = <1>; + }; + + usbdrd3_1: usb3-1 { + compatible = "samsung,exynos5250-dwusb3"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + usbdrd_dwc3_1: dwc3@12400000 { + compatible = "snps,dwc3"; + reg = <0x12400000 0x10000>; + phys = <&usbdrd_phy1 0>, <&usbdrd_phy1 1>; + phy-names = "usb2-phy", "usb3-phy"; + }; + }; + + usbdrd_phy1: phy@12500000 { + compatible = "samsung,exynos5420-usbdrd-phy"; + reg = <0x12500000 0x100>; + #phy-cells = <1>; + }; + + usbhost2: usb@12110000 { + compatible = "samsung,exynos4210-ehci"; + reg = <0x12110000 0x100>; + interrupts = <0 71 0>; + + #address-cells = <1>; + #size-cells = <0>; + port@0 { + reg = <0>; + phys = <&usb2_phy 1>; + }; + }; + + usbhost1: usb@12120000 { + compatible = "samsung,exynos4210-ohci"; + reg = <0x12120000 0x100>; + interrupts = <0 71 0>; + + #address-cells = <1>; + #size-cells = <0>; + port@0 { + reg = <0>; + phys = <&usb2_phy 1>; + }; + }; + + usb2_phy: phy@12130000 { + compatible = "samsung,exynos5250-usb2-phy"; + reg = <0x12130000 0x100>; + #phy-cells = <1>; + }; + }; +}; diff --git a/arch/arm/boot/dts/exynos5800-peach-pi.dts b/arch/arm/boot/dts/exynos5800-peach-pi.dts index 62ceb89e0..5ec71e240 100644 --- a/arch/arm/boot/dts/exynos5800-peach-pi.dts +++ b/arch/arm/boot/dts/exynos5800-peach-pi.dts @@ -16,6 +16,7 @@ #include <dt-bindings/regulator/maxim,max77802.h> #include "exynos5800.dtsi" #include "exynos5420-cpus.dtsi" +#include "exynos-mfc-reserved-memory.dtsi" / { model = "Google Peach Pi Rev 10+"; @@ -278,7 +279,6 @@ regulator-name = "vdd_1v2"; regulator-min-microvolt = <1200000>; regulator-max-microvolt = <1200000>; - regulator-always-on; regulator-boot-on; regulator-state-mem { regulator-off-in-suspend; @@ -301,7 +301,6 @@ regulator-name = "vdd_1v35"; regulator-min-microvolt = <1350000>; regulator-max-microvolt = <1350000>; - regulator-always-on; regulator-boot-on; regulator-state-mem { regulator-on-in-suspend; @@ -323,7 +322,6 @@ regulator-name = "vdd_2v"; regulator-min-microvolt = <2000000>; regulator-max-microvolt = <2000000>; - regulator-always-on; regulator-boot-on; regulator-state-mem { regulator-on-in-suspend; @@ -334,7 +332,6 @@ regulator-name = "vdd_1v8"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; - regulator-always-on; regulator-boot-on; regulator-state-mem { regulator-on-in-suspend; @@ -419,7 +416,6 @@ regulator-name = "vdd_ldo9"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; - regulator-always-on; regulator-state-mem { regulator-on-in-suspend; regulator-mode = <MAX77802_OPMODE_LP>; @@ -430,7 +426,6 @@ regulator-name = "vdd_ldo10"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; - regulator-always-on; regulator-state-mem { regulator-off-in-suspend; }; @@ -669,11 +664,6 @@ status = "okay"; }; -&mfc { - samsung,mfc-r = <0x43000000 0x800000>; - samsung,mfc-l = <0x51000000 0x800000>; -}; - &mmc_0 { status = "okay"; num-slots = <1>; @@ -1022,6 +1012,26 @@ status = "okay"; }; +&tmu_cpu0 { + vtmu-supply = <&ldo10_reg>; +}; + +&tmu_cpu1 { + vtmu-supply = <&ldo10_reg>; +}; + +&tmu_cpu2 { + vtmu-supply = <&ldo10_reg>; +}; + +&tmu_cpu3 { + vtmu-supply = <&ldo10_reg>; +}; + +&tmu_gpu { + vtmu-supply = <&ldo10_reg>; +}; + &usbdrd_dwc3_0 { dr_mode = "host"; }; diff --git a/arch/arm/boot/dts/ge863-pro3.dtsi b/arch/arm/boot/dts/ge863-pro3.dtsi index 0d0e62489..4aee5cc75 100644 --- a/arch/arm/boot/dts/ge863-pro3.dtsi +++ b/arch/arm/boot/dts/ge863-pro3.dtsi @@ -11,15 +11,6 @@ / { clocks { - #address-cells = <1>; - #size-cells = <1>; - ranges; - - main_clock: clock@0 { - compatible = "atmel,osc", "fixed-clock"; - clock-frequency = <6000000>; - }; - main_xtal { clock-frequency = <6000000>; }; diff --git a/arch/arm/boot/dts/hi3519-demb.dts b/arch/arm/boot/dts/hi3519-demb.dts new file mode 100644 index 000000000..6991ab694 --- /dev/null +++ b/arch/arm/boot/dts/hi3519-demb.dts @@ -0,0 +1,42 @@ +/* + * Copyright (c) 2015 HiSilicon Technologies Co., Ltd. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + * + */ + +/dts-v1/; +#include "hi3519.dtsi" + +/ { + model = "HiSilicon HI3519 DEMO Board"; + compatible = "hisilicon,hi3519"; + + aliases { + serial0 = &uart0; + }; + + memory { + device_type = "memory"; + reg = <0x80000000 0x40000000>; + }; +}; + +&uart0 { + status = "okay"; +}; + +&dual_timer0 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/hi3519.dtsi b/arch/arm/boot/dts/hi3519.dtsi new file mode 100644 index 000000000..5729ecfcd --- /dev/null +++ b/arch/arm/boot/dts/hi3519.dtsi @@ -0,0 +1,187 @@ +/* + * Copyright (c) 2015 HiSilicon Technologies Co., Ltd. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + * + */ + +#include <dt-bindings/clock/hi3519-clock.h> +#include <dt-bindings/interrupt-controller/arm-gic.h> +/ { + #address-cells = <1>; + #size-cells = <1>; + chosen { }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a7"; + reg = <0>; + }; + }; + + gic: interrupt-controller@10300000 { + compatible = "arm,cortex-a7-gic"; + #interrupt-cells = <3>; + interrupt-controller; + reg = <0x10301000 0x1000>, <0x10302000 0x1000>; + }; + + clk_3m: clk_3m { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <3000000>; + }; + + crg: clock-reset-controller@12010000 { + compatible = "hisilicon,hi3519-crg"; + #clock-cells = <1>; + #reset-cells = <2>; + reg = <0x12010000 0x10000>; + }; + + soc { + #address-cells = <1>; + #size-cells = <1>; + compatible = "simple-bus"; + interrupt-parent = <&gic>; + ranges; + + uart0: serial@12100000 { + compatible = "arm,pl011", "arm,primecell"; + reg = <0x12100000 0x1000>; + interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&crg HI3519_UART0_CLK>; + clock-names = "apb_pclk"; + status = "disable"; + }; + + uart1: serial@12101000 { + compatible = "arm,pl011", "arm,primecell"; + reg = <0x12101000 0x1000>; + interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&crg HI3519_UART1_CLK>; + clock-names = "apb_pclk"; + status = "disable"; + }; + + uart2: serial@12102000 { + compatible = "arm,pl011", "arm,primecell"; + reg = <0x12102000 0x1000>; + interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&crg HI3519_UART2_CLK>; + clock-names = "apb_pclk"; + status = "disable"; + }; + + uart3: serial@12103000 { + compatible = "arm,pl011", "arm,primecell"; + reg = <0x12103000 0x1000>; + interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&crg HI3519_UART3_CLK>; + clock-names = "apb_pclk"; + status = "disable"; + }; + + uart4: serial@12104000 { + compatible = "arm,pl011", "arm,primecell"; + reg = <0x12104000 0x1000>; + interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&crg HI3519_UART4_CLK>; + clock-names = "apb_pclk"; + status = "disable"; + }; + + dual_timer0: timer@12000000 { + compatible = "arm,sp804", "arm,primecell"; + interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>; + reg = <0x12000000 0x1000>; + clocks = <&clk_3m>; + clock-names = "apb_pclk"; + status = "disable"; + }; + + dual_timer1: timer@12001000 { + compatible = "arm,sp804", "arm,primecell"; + interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>; + reg = <0x12001000 0x1000>; + clocks = <&clk_3m>; + clock-names = "apb_pclk"; + status = "disable"; + }; + + dual_timer2: timer@12002000 { + compatible = "arm,sp804", "arm,primecell"; + interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>; + reg = <0x12002000 0x1000>; + clocks = <&clk_3m>; + clock-names = "apb_pclk"; + status = "disable"; + }; + + spi_bus0: spi@12120000 { + compatible = "arm,pl022", "arm,primecell"; + reg = <0x12120000 0x1000>; + interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&crg HI3519_SPI0_CLK>; + clock-names = "apb_pclk"; + num-cs = <1>; + #address-cells = <1>; + #size-cells = <0>; + status = "disable"; + }; + + spi_bus1: spi@12121000 { + compatible = "arm,pl022", "arm,primecell"; + reg = <0x12121000 0x1000>; + interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&crg HI3519_SPI1_CLK>; + clock-names = "apb_pclk"; + num-cs = <1>; + #address-cells = <1>; + #size-cells = <0>; + status = "disable"; + }; + + spi_bus2: spi@12122000 { + compatible = "arm,pl022", "arm,primecell"; + reg = <0x12122000 0x1000>; + interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&crg HI3519_SPI2_CLK>; + clock-names = "apb_pclk"; + num-cs = <1>; + #address-cells = <1>; + #size-cells = <0>; + status = "disable"; + }; + + sysctrl: system-controller@12020000 { + compatible = "hisilicon,hi3519-sysctrl", "syscon"; + reg = <0x12020000 0x1000>; + }; + + reboot { + compatible = "syscon-reboot"; + regmap = <&sysctrl>; + offset = <0x4>; + mask = <0xdeadbeef>; + }; + }; +}; diff --git a/arch/arm/boot/dts/imx1-ads.dts b/arch/arm/boot/dts/imx1-ads.dts index af4eee579..f50498659 100644 --- a/arch/arm/boot/dts/imx1-ads.dts +++ b/arch/arm/boot/dts/imx1-ads.dts @@ -66,14 +66,14 @@ &uart1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart1>; - fsl,uart-has-rtscts; + uart-has-rtscts; status = "okay"; }; &uart2 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart2>; - fsl,uart-has-rtscts; + uart-has-rtscts; status = "okay"; }; diff --git a/arch/arm/boot/dts/imx1-apf9328.dts b/arch/arm/boot/dts/imx1-apf9328.dts index 07d92fb40..e8b4b52c2 100644 --- a/arch/arm/boot/dts/imx1-apf9328.dts +++ b/arch/arm/boot/dts/imx1-apf9328.dts @@ -34,14 +34,14 @@ &uart1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart1>; - fsl,uart-has-rtscts; + uart-has-rtscts; status = "okay"; }; &uart2 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart2>; - fsl,uart-has-rtscts; + uart-has-rtscts; status = "okay"; }; diff --git a/arch/arm/boot/dts/imx23-sansa.dts b/arch/arm/boot/dts/imx23-sansa.dts new file mode 100644 index 000000000..4ec32f4c7 --- /dev/null +++ b/arch/arm/boot/dts/imx23-sansa.dts @@ -0,0 +1,207 @@ +/* + * Copyright (C) 2013-2016 Marek Vasut <marek.vasut@gmail.com> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + * + */ + +/dts-v1/; +#include "imx23.dtsi" + +/ { + model = "SanDisk Sansa Fuze+"; + compatible = "sandisk,sansa_fuze_plus", "fsl,imx23"; + + memory { + reg = <0x40000000 0x04000000>; + }; + + apb@80000000 { + apbh@80000000 { + ssp0: ssp@80010000 { + compatible = "fsl,imx23-mmc"; + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_4bit_pins_a &mmc0_pins_fixup>; + bus-width = <4>; + vmmc-supply = <®_vddio_sd0>; + cd-inverted; + status = "okay"; + }; + + ssp1: ssp@80034000 { + compatible = "fsl,imx23-mmc"; + pinctrl-names = "default"; + pinctrl-0 = <&mmc1_8bit_pins_a>; + bus-width = <8>; + vmmc-supply = <®_vddio_sd1>; + non-removable; + status = "okay"; + }; + + pinctrl@80018000 { + pinctrl-names = "default"; + pinctrl-0 = <&hog_pins_a>; + + hog_pins_a: hog@0 { + reg = <0>; + fsl,pinmux-ids = < + MX23_PAD_GPMI_D08__GPIO_0_8 + MX23_PAD_PWM3__GPIO_1_29 + MX23_PAD_AUART1_RTS__GPIO_0_27 + MX23_PAD_AUART1_CTS__GPIO_0_26 + MX23_PAD_I2C_SCL__I2C_SCL + MX23_PAD_I2C_SDA__I2C_SDA + MX23_PAD_LCD_DOTCK__GPIO_1_22 + MX23_PAD_LCD_HSYNC__GPIO_1_24 + MX23_PAD_PWM3__GPIO_1_29 + >; + fsl,drive-strength = <0>; + fsl,voltage = <1>; + fsl,pull-up = <0>; + }; + }; + }; + + apbx@80040000 { + pwm: pwm@80064000 { + pinctrl-names = "default"; + pinctrl-0 = <&pwm2_pins_a>; + status = "okay"; + }; + + duart: serial@80070000 { + pinctrl-names = "default"; + pinctrl-0 = <&duart_pins_a>; + status = "okay"; + }; + + usbphy0: usbphy@8007c000 { + status = "okay"; + }; + + lradc@80050000 { + status = "okay"; + }; + }; + }; + + ahb@80080000 { + usb0: usb@80080000 { + dr_mode = "peripheral"; + status = "okay"; + }; + }; + + reg_vddio_sd0: regulator-vddio-sd0 { + compatible = "regulator-fixed"; + regulator-name = "vddio-sd0"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio0 8 0>; + }; + + reg_vddio_sd1: regulator-vddio-sd1 { + compatible = "regulator-fixed"; + regulator-name = "vddio-sd1"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio1 29 0>; + }; + + reg_vdd_touchpad: regulator-vdd-touchpad0 { + compatible = "regulator-fixed"; + regulator-name = "vdd-touchpad0"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio0 26 0>; + regulator-always-on; + enable-active-low; + }; + + reg_vdd_tuner: regulator-vdd-tuner0 { + compatible = "regulator-fixed"; + regulator-name = "vdd-tuner0"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio0 29 0>; + regulator-always-on; + enable-active-low; + }; + + backlight { + compatible = "pwm-backlight"; + pwms = <&pwm 2 5000000>; + brightness-levels = <0 4 8 16 32 64 128 255>; + default-brightness-level = <6>; + }; + + i2c-0 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "i2c-gpio"; + gpios = < + &gpio1 24 0 /* SDA */ + &gpio1 22 0 /* SCL */ + >; + i2c-gpio,delay-us = <2>; /* ~100 kHz */ + }; + + i2c-1 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "i2c-gpio"; + gpios = < + &gpio0 31 0 /* SDA */ + &gpio0 30 0 /* SCL */ + >; + i2c-gpio,delay-us = <2>; /* ~100 kHz */ + + touch: touch@20 { + compatible = "synaptics,synaptics_i2c"; + reg = <0x20>; + }; + + eeprom: eeprom@50 { + compatible = "atmel,24c64"; + reg = <0x50>; + pagesize = <32>; + }; + }; + +}; diff --git a/arch/arm/boot/dts/imx23-xfi3.dts b/arch/arm/boot/dts/imx23-xfi3.dts new file mode 100644 index 000000000..025cf9496 --- /dev/null +++ b/arch/arm/boot/dts/imx23-xfi3.dts @@ -0,0 +1,179 @@ +/* + * Copyright (C) 2013-2016 Marek Vasut <marek.vasut@gmail.com> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + * + */ + +/dts-v1/; +#include "imx23.dtsi" + +/ { + model = "Creative ZEN X-Fi3"; + compatible = "creative,x-fi3", "fsl,imx23"; + + memory { + reg = <0x40000000 0x04000000>; + }; + + apb@80000000 { + apbh@80000000 { + ssp0: ssp@80010000 { + compatible = "fsl,imx23-mmc"; + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_4bit_pins_a &mmc0_pins_fixup>; + bus-width = <4>; + vmmc-supply = <®_vddio_sd0>; + cd-inverted; + status = "okay"; + }; + + ssp1: ssp@80034000 { + compatible = "fsl,imx23-mmc"; + pinctrl-names = "default"; + pinctrl-0 = <&mmc1_4bit_pins_a>; + bus-width = <4>; + non-removable; + status = "okay"; + }; + + pinctrl@80018000 { + pinctrl-names = "default"; + pinctrl-0 = <&hog_pins_a>; + + hog_pins_a: hog@0 { + reg = <0>; + fsl,pinmux-ids = < + MX23_PAD_GPMI_D07__GPIO_0_7 + >; + fsl,drive-strength = <0>; + fsl,voltage = <1>; + fsl,pull-up = <0>; + }; + + key_pins_a: keys@0 { + reg = <0>; + fsl,pinmux-ids = < + MX23_PAD_ROTARYA__GPIO_2_7 + MX23_PAD_ROTARYB__GPIO_2_8 + >; + fsl,drive-strength = <0>; + fsl,voltage = <1>; + fsl,pull-up = <1>; + }; + }; + }; + + apbx@80040000 { + i2c: i2c@80058000 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c_pins_a>; + status = "okay"; + }; + + pwm: pwm@80064000 { + pinctrl-names = "default"; + pinctrl-0 = <&pwm2_pins_a>; + status = "okay"; + }; + + duart: serial@80070000 { + pinctrl-names = "default"; + pinctrl-0 = <&duart_pins_a>; + status = "okay"; + }; + + auart1: serial@8006e000 { + pinctrl-names = "default"; + pinctrl-0 = <&auart1_2pins_a>; + status = "okay"; + }; + + usbphy0: usbphy@8007c000 { + status = "okay"; + }; + + lradc@80050000 { + status = "okay"; + }; + }; + }; + + ahb@80080000 { + usb0: usb@80080000 { + dr_mode = "peripheral"; + status = "okay"; + }; + }; + + reg_vddio_sd0: regulator-vddio-sd0 { + compatible = "regulator-fixed"; + regulator-name = "vddio-sd0"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio0 7 0>; + }; + + backlight { + compatible = "pwm-backlight"; + pwms = <&pwm 2 5000000>; + brightness-levels = <0 4 8 16 32 64 128 255>; + default-brightness-level = <6>; + }; + + gpio_keys { + compatible = "gpio-keys"; + pinctrl-names = "default"; + pinctrl-0 = <&key_pins_a>; + + voldown { + label = "volume-down"; + linux,code = <114>; + gpios = <&gpio2 7 0>; + debounce-interval = <20>; + }; + + volup { + label = "volume-up"; + linux,code = <115>; + gpios = <&gpio2 8 0>; + debounce-interval = <20>; + }; + }; +}; diff --git a/arch/arm/boot/dts/imx23.dtsi b/arch/arm/boot/dts/imx23.dtsi index 302d1168f..440ee9a4a 100644 --- a/arch/arm/boot/dts/imx23.dtsi +++ b/arch/arm/boot/dts/imx23.dtsi @@ -111,6 +111,7 @@ gpio0: gpio@0 { compatible = "fsl,imx23-gpio", "fsl,mxs-gpio"; + reg = <0>; interrupts = <16>; gpio-controller; #gpio-cells = <2>; @@ -120,6 +121,7 @@ gpio1: gpio@1 { compatible = "fsl,imx23-gpio", "fsl,mxs-gpio"; + reg = <1>; interrupts = <17>; gpio-controller; #gpio-cells = <2>; @@ -129,6 +131,7 @@ gpio2: gpio@2 { compatible = "fsl,imx23-gpio", "fsl,mxs-gpio"; + reg = <2>; interrupts = <18>; gpio-controller; #gpio-cells = <2>; @@ -171,6 +174,17 @@ fsl,pull-up = <MXS_PULL_DISABLE>; }; + auart1_2pins_a: auart1-2pins@0 { + reg = <0>; + fsl,pinmux-ids = < + MX23_PAD_GPMI_D14__AUART2_RX + MX23_PAD_GPMI_D15__AUART2_TX + >; + fsl,drive-strength = <MXS_DRIVE_4mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_DISABLE>; + }; + gpmi_pins_a: gpmi-nand@0 { reg = <0>; fsl,pinmux-ids = < @@ -249,6 +263,40 @@ fsl,pull-up = <MXS_PULL_DISABLE>; }; + mmc1_4bit_pins_a: mmc1-4bit@0 { + reg = <0>; + fsl,pinmux-ids = < + MX23_PAD_GPMI_D00__SSP2_DATA0 + MX23_PAD_GPMI_D01__SSP2_DATA1 + MX23_PAD_GPMI_D02__SSP2_DATA2 + MX23_PAD_GPMI_D03__SSP2_DATA3 + MX23_PAD_GPMI_RDY1__SSP2_CMD + MX23_PAD_GPMI_WRN__SSP2_SCK + >; + fsl,drive-strength = <MXS_DRIVE_8mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_ENABLE>; + }; + + mmc1_8bit_pins_a: mmc1-8bit@0 { + reg = <0>; + fsl,pinmux-ids = < + MX23_PAD_GPMI_D00__SSP2_DATA0 + MX23_PAD_GPMI_D01__SSP2_DATA1 + MX23_PAD_GPMI_D02__SSP2_DATA2 + MX23_PAD_GPMI_D03__SSP2_DATA3 + MX23_PAD_GPMI_D04__SSP2_DATA4 + MX23_PAD_GPMI_D05__SSP2_DATA5 + MX23_PAD_GPMI_D06__SSP2_DATA6 + MX23_PAD_GPMI_D07__SSP2_DATA7 + MX23_PAD_GPMI_RDY1__SSP2_CMD + MX23_PAD_GPMI_WRN__SSP2_SCK + >; + fsl,drive-strength = <MXS_DRIVE_8mA>; + fsl,voltage = <MXS_VOLTAGE_HIGH>; + fsl,pull-up = <MXS_PULL_ENABLE>; + }; + pwm2_pins_a: pwm2@0 { reg = <0>; fsl,pinmux-ids = < diff --git a/arch/arm/boot/dts/imx25-eukrea-mbimxsd25-baseboard.dts b/arch/arm/boot/dts/imx25-eukrea-mbimxsd25-baseboard.dts index cda6907a2..9300711f1 100644 --- a/arch/arm/boot/dts/imx25-eukrea-mbimxsd25-baseboard.dts +++ b/arch/arm/boot/dts/imx25-eukrea-mbimxsd25-baseboard.dts @@ -161,14 +161,14 @@ &uart1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart1>; - fsl,uart-has-rtscts; + uart-has-rtscts; status = "okay"; }; &uart2 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart2>; - fsl,uart-has-rtscts; + uart-has-rtscts; status = "okay"; }; diff --git a/arch/arm/boot/dts/imx25-pdk.dts b/arch/arm/boot/dts/imx25-pdk.dts index 935129635..70292101b 100644 --- a/arch/arm/boot/dts/imx25-pdk.dts +++ b/arch/arm/boot/dts/imx25-pdk.dts @@ -298,7 +298,7 @@ &uart1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart1>; - fsl,uart-has-rtscts; + uart-has-rtscts; status = "okay"; }; diff --git a/arch/arm/boot/dts/imx25-pinfunc.h b/arch/arm/boot/dts/imx25-pinfunc.h index f96fa2df8..f840f03ad 100644 --- a/arch/arm/boot/dts/imx25-pinfunc.h +++ b/arch/arm/boot/dts/imx25-pinfunc.h @@ -26,77 +26,77 @@ #define MX25_PAD_A13__GPIO_4_1 0x00c 0x22C 0x000 0x05 0x000 #define MX25_PAD_A13__LCDC_CLS 0x00c 0x22C 0x000 0x07 0x000 -#define MX25_PAD_A14__A14 0x010 0x230 0x000 0x10 0x000 -#define MX25_PAD_A14__GPIO_2_0 0x010 0x230 0x000 0x15 0x000 -#define MX25_PAD_A14__SIM1_CLK1 0x010 0x230 0x000 0x16 0x000 -#define MX25_PAD_A14__LCDC_SPL 0x010 0x230 0x000 0x17 0x000 - -#define MX25_PAD_A15__A15 0x014 0x234 0x000 0x10 0x000 -#define MX25_PAD_A15__GPIO_2_1 0x014 0x234 0x000 0x15 0x000 -#define MX25_PAD_A15__SIM1_RST1 0x014 0x234 0x000 0x16 0x000 -#define MX25_PAD_A15__LCDC_PS 0x014 0x234 0x000 0x17 0x000 - -#define MX25_PAD_A16__A16 0x018 0x000 0x000 0x10 0x000 -#define MX25_PAD_A16__GPIO_2_2 0x018 0x000 0x000 0x15 0x000 -#define MX25_PAD_A16__SIM1_VEN1 0x018 0x000 0x000 0x16 0x000 -#define MX25_PAD_A16__LCDC_REV 0x018 0x000 0x000 0x17 0x000 - -#define MX25_PAD_A17__A17 0x01c 0x238 0x000 0x10 0x000 -#define MX25_PAD_A17__GPIO_2_3 0x01c 0x238 0x000 0x15 0x000 -#define MX25_PAD_A17__SIM1_TX 0x01c 0x238 0x554 0x16 0x000 -#define MX25_PAD_A17__FEC_TX_ERR 0x01c 0x238 0x000 0x17 0x000 - -#define MX25_PAD_A18__A18 0x020 0x23c 0x000 0x10 0x000 -#define MX25_PAD_A18__GPIO_2_4 0x020 0x23c 0x000 0x15 0x000 -#define MX25_PAD_A18__SIM1_PD1 0x020 0x23c 0x550 0x16 0x000 -#define MX25_PAD_A18__FEC_COL 0x020 0x23c 0x504 0x17 0x000 - -#define MX25_PAD_A19__A19 0x024 0x240 0x000 0x10 0x000 -#define MX25_PAD_A19__GPIO_2_5 0x024 0x240 0x000 0x15 0x000 -#define MX25_PAD_A19__SIM1_RX1 0x024 0x240 0x54c 0x16 0x000 -#define MX25_PAD_A19__FEC_RX_ERR 0x024 0x240 0x518 0x17 0x000 - -#define MX25_PAD_A20__A20 0x028 0x244 0x000 0x10 0x000 -#define MX25_PAD_A20__GPIO_2_6 0x028 0x244 0x000 0x15 0x000 -#define MX25_PAD_A20__SIM2_CLK1 0x028 0x244 0x000 0x16 0x000 -#define MX25_PAD_A20__FEC_RDATA2 0x028 0x244 0x50c 0x17 0x000 - -#define MX25_PAD_A21__A21 0x02c 0x248 0x000 0x10 0x000 -#define MX25_PAD_A21__GPIO_2_7 0x02c 0x248 0x000 0x15 0x000 -#define MX25_PAD_A21__SIM2_RST1 0x02c 0x248 0x000 0x16 0x000 -#define MX25_PAD_A21__FEC_RDATA3 0x02c 0x248 0x510 0x17 0x000 - -#define MX25_PAD_A22__A22 0x030 0x000 0x000 0x10 0x000 -#define MX25_PAD_A22__GPIO_2_8 0x030 0x000 0x000 0x15 0x000 -#define MX25_PAD_A22__FEC_TDATA2 0x030 0x000 0x000 0x17 0x000 -#define MX25_PAD_A22__SIM2_VEN1 0x030 0x000 0x000 0x16 0x000 -#define MX25_PAD_A22__FEC_TDATA2 0x030 0x000 0x000 0x17 0x000 - -#define MX25_PAD_A23__A23 0x034 0x24c 0x000 0x10 0x000 -#define MX25_PAD_A23__GPIO_2_9 0x034 0x24c 0x000 0x15 0x000 -#define MX25_PAD_A23__SIM2_TX1 0x034 0x24c 0x560 0x16 0x000 -#define MX25_PAD_A23__FEC_TDATA3 0x034 0x24c 0x000 0x17 0x000 - -#define MX25_PAD_A24__A24 0x038 0x250 0x000 0x10 0x000 -#define MX25_PAD_A24__GPIO_2_10 0x038 0x250 0x000 0x15 0x000 -#define MX25_PAD_A24__SIM2_PD1 0x038 0x250 0x55c 0x16 0x000 -#define MX25_PAD_A24__FEC_RX_CLK 0x038 0x250 0x514 0x17 0x000 - -#define MX25_PAD_A25__A25 0x03c 0x254 0x000 0x10 0x000 -#define MX25_PAD_A25__GPIO_2_11 0x03c 0x254 0x000 0x15 0x000 -#define MX25_PAD_A25__FEC_CRS 0x03c 0x254 0x508 0x17 0x000 - -#define MX25_PAD_EB0__EB0 0x040 0x258 0x000 0x10 0x000 -#define MX25_PAD_EB0__AUD4_TXD 0x040 0x258 0x464 0x14 0x000 -#define MX25_PAD_EB0__GPIO_2_12 0x040 0x258 0x000 0x15 0x000 - -#define MX25_PAD_EB1__EB1 0x044 0x25c 0x000 0x10 0x000 -#define MX25_PAD_EB1__AUD4_RXD 0x044 0x25c 0x460 0x14 0x000 -#define MX25_PAD_EB1__GPIO_2_13 0x044 0x25c 0x000 0x15 0x000 - -#define MX25_PAD_OE__OE 0x048 0x260 0x000 0x10 0x000 -#define MX25_PAD_OE__AUD4_TXC 0x048 0x260 0x000 0x14 0x000 -#define MX25_PAD_OE__GPIO_2_14 0x048 0x260 0x000 0x15 0x000 +#define MX25_PAD_A14__A14 0x010 0x230 0x000 0x00 0x000 +#define MX25_PAD_A14__GPIO_2_0 0x010 0x230 0x000 0x05 0x000 +#define MX25_PAD_A14__SIM1_CLK1 0x010 0x230 0x000 0x06 0x000 +#define MX25_PAD_A14__LCDC_SPL 0x010 0x230 0x000 0x07 0x000 + +#define MX25_PAD_A15__A15 0x014 0x234 0x000 0x00 0x000 +#define MX25_PAD_A15__GPIO_2_1 0x014 0x234 0x000 0x05 0x000 +#define MX25_PAD_A15__SIM1_RST1 0x014 0x234 0x000 0x06 0x000 +#define MX25_PAD_A15__LCDC_PS 0x014 0x234 0x000 0x07 0x000 + +#define MX25_PAD_A16__A16 0x018 0x000 0x000 0x00 0x000 +#define MX25_PAD_A16__GPIO_2_2 0x018 0x000 0x000 0x05 0x000 +#define MX25_PAD_A16__SIM1_VEN1 0x018 0x000 0x000 0x06 0x000 +#define MX25_PAD_A16__LCDC_REV 0x018 0x000 0x000 0x07 0x000 + +#define MX25_PAD_A17__A17 0x01c 0x238 0x000 0x00 0x000 +#define MX25_PAD_A17__GPIO_2_3 0x01c 0x238 0x000 0x05 0x000 +#define MX25_PAD_A17__SIM1_TX 0x01c 0x238 0x554 0x06 0x000 +#define MX25_PAD_A17__FEC_TX_ERR 0x01c 0x238 0x000 0x07 0x000 + +#define MX25_PAD_A18__A18 0x020 0x23c 0x000 0x00 0x000 +#define MX25_PAD_A18__GPIO_2_4 0x020 0x23c 0x000 0x05 0x000 +#define MX25_PAD_A18__SIM1_PD1 0x020 0x23c 0x550 0x06 0x000 +#define MX25_PAD_A18__FEC_COL 0x020 0x23c 0x504 0x07 0x000 + +#define MX25_PAD_A19__A19 0x024 0x240 0x000 0x00 0x000 +#define MX25_PAD_A19__GPIO_2_5 0x024 0x240 0x000 0x05 0x000 +#define MX25_PAD_A19__SIM1_RX1 0x024 0x240 0x54c 0x06 0x000 +#define MX25_PAD_A19__FEC_RX_ERR 0x024 0x240 0x518 0x07 0x000 + +#define MX25_PAD_A20__A20 0x028 0x244 0x000 0x00 0x000 +#define MX25_PAD_A20__GPIO_2_6 0x028 0x244 0x000 0x05 0x000 +#define MX25_PAD_A20__SIM2_CLK1 0x028 0x244 0x000 0x06 0x000 +#define MX25_PAD_A20__FEC_RDATA2 0x028 0x244 0x50c 0x07 0x000 + +#define MX25_PAD_A21__A21 0x02c 0x248 0x000 0x00 0x000 +#define MX25_PAD_A21__GPIO_2_7 0x02c 0x248 0x000 0x05 0x000 +#define MX25_PAD_A21__SIM2_RST1 0x02c 0x248 0x000 0x06 0x000 +#define MX25_PAD_A21__FEC_RDATA3 0x02c 0x248 0x510 0x07 0x000 + +#define MX25_PAD_A22__A22 0x030 0x000 0x000 0x00 0x000 +#define MX25_PAD_A22__GPIO_2_8 0x030 0x000 0x000 0x05 0x000 +#define MX25_PAD_A22__FEC_TDATA2 0x030 0x000 0x000 0x07 0x000 +#define MX25_PAD_A22__SIM2_VEN1 0x030 0x000 0x000 0x06 0x000 +#define MX25_PAD_A22__FEC_TDATA2 0x030 0x000 0x000 0x07 0x000 + +#define MX25_PAD_A23__A23 0x034 0x24c 0x000 0x00 0x000 +#define MX25_PAD_A23__GPIO_2_9 0x034 0x24c 0x000 0x05 0x000 +#define MX25_PAD_A23__SIM2_TX1 0x034 0x24c 0x560 0x06 0x000 +#define MX25_PAD_A23__FEC_TDATA3 0x034 0x24c 0x000 0x07 0x000 + +#define MX25_PAD_A24__A24 0x038 0x250 0x000 0x00 0x000 +#define MX25_PAD_A24__GPIO_2_10 0x038 0x250 0x000 0x05 0x000 +#define MX25_PAD_A24__SIM2_PD1 0x038 0x250 0x55c 0x06 0x000 +#define MX25_PAD_A24__FEC_RX_CLK 0x038 0x250 0x514 0x07 0x000 + +#define MX25_PAD_A25__A25 0x03c 0x254 0x000 0x00 0x000 +#define MX25_PAD_A25__GPIO_2_11 0x03c 0x254 0x000 0x05 0x000 +#define MX25_PAD_A25__FEC_CRS 0x03c 0x254 0x508 0x07 0x000 + +#define MX25_PAD_EB0__EB0 0x040 0x258 0x000 0x00 0x000 +#define MX25_PAD_EB0__AUD4_TXD 0x040 0x258 0x464 0x04 0x000 +#define MX25_PAD_EB0__GPIO_2_12 0x040 0x258 0x000 0x05 0x000 + +#define MX25_PAD_EB1__EB1 0x044 0x25c 0x000 0x00 0x000 +#define MX25_PAD_EB1__AUD4_RXD 0x044 0x25c 0x460 0x04 0x000 +#define MX25_PAD_EB1__GPIO_2_13 0x044 0x25c 0x000 0x05 0x000 + +#define MX25_PAD_OE__OE 0x048 0x260 0x000 0x00 0x000 +#define MX25_PAD_OE__AUD4_TXC 0x048 0x260 0x000 0x04 0x000 +#define MX25_PAD_OE__GPIO_2_14 0x048 0x260 0x000 0x05 0x000 #define MX25_PAD_CS0__CS0 0x04c 0x000 0x000 0x00 0x000 #define MX25_PAD_CS0__GPIO_4_2 0x04c 0x000 0x000 0x05 0x000 @@ -105,51 +105,51 @@ #define MX25_PAD_CS1__NF_CE3 0x050 0x000 0x000 0x01 0x000 #define MX25_PAD_CS1__GPIO_4_3 0x050 0x000 0x000 0x05 0x000 -#define MX25_PAD_CS4__CS4 0x054 0x264 0x000 0x10 0x000 +#define MX25_PAD_CS4__CS4 0x054 0x264 0x000 0x00 0x000 #define MX25_PAD_CS4__NF_CE1 0x054 0x264 0x000 0x01 0x000 -#define MX25_PAD_CS4__UART5_CTS 0x054 0x264 0x000 0x13 0x000 -#define MX25_PAD_CS4__GPIO_3_20 0x054 0x264 0x000 0x15 0x000 +#define MX25_PAD_CS4__UART5_CTS 0x054 0x264 0x000 0x03 0x000 +#define MX25_PAD_CS4__GPIO_3_20 0x054 0x264 0x000 0x05 0x000 #define MX25_PAD_CS5__CS5 0x058 0x268 0x000 0x00 0x000 #define MX25_PAD_CS5__NF_CE2 0x058 0x268 0x000 0x01 0x000 #define MX25_PAD_CS5__UART5_RTS 0x058 0x268 0x574 0x03 0x000 #define MX25_PAD_CS5__GPIO_3_21 0x058 0x268 0x000 0x05 0x000 -#define MX25_PAD_NF_CE0__NF_CE0 0x05c 0x26c 0x000 0x10 0x000 -#define MX25_PAD_NF_CE0__GPIO_3_22 0x05c 0x26c 0x000 0x15 0x000 +#define MX25_PAD_NF_CE0__NF_CE0 0x05c 0x26c 0x000 0x00 0x000 +#define MX25_PAD_NF_CE0__GPIO_3_22 0x05c 0x26c 0x000 0x05 0x000 -#define MX25_PAD_ECB__ECB 0x060 0x270 0x000 0x10 0x000 -#define MX25_PAD_ECB__UART5_TXD 0x060 0x270 0x000 0x13 0x000 -#define MX25_PAD_ECB__GPIO_3_23 0x060 0x270 0x000 0x15 0x000 +#define MX25_PAD_ECB__ECB 0x060 0x270 0x000 0x00 0x000 +#define MX25_PAD_ECB__UART5_TXD 0x060 0x270 0x000 0x03 0x000 +#define MX25_PAD_ECB__GPIO_3_23 0x060 0x270 0x000 0x05 0x000 -#define MX25_PAD_LBA__LBA 0x064 0x274 0x000 0x10 0x000 -#define MX25_PAD_LBA__UART5_RXD 0x064 0x274 0x578 0x13 0x000 -#define MX25_PAD_LBA__GPIO_3_24 0x064 0x274 0x000 0x15 0x000 +#define MX25_PAD_LBA__LBA 0x064 0x274 0x000 0x00 0x000 +#define MX25_PAD_LBA__UART5_RXD 0x064 0x274 0x578 0x03 0x000 +#define MX25_PAD_LBA__GPIO_3_24 0x064 0x274 0x000 0x05 0x000 #define MX25_PAD_BCLK__BCLK 0x068 0x000 0x000 0x00 0x000 #define MX25_PAD_BCLK__GPIO_4_4 0x068 0x000 0x000 0x05 0x000 -#define MX25_PAD_RW__RW 0x06c 0x278 0x000 0x10 0x000 -#define MX25_PAD_RW__AUD4_TXFS 0x06c 0x278 0x474 0x14 0x000 -#define MX25_PAD_RW__GPIO_3_25 0x06c 0x278 0x000 0x15 0x000 +#define MX25_PAD_RW__RW 0x06c 0x278 0x000 0x00 0x000 +#define MX25_PAD_RW__AUD4_TXFS 0x06c 0x278 0x474 0x04 0x000 +#define MX25_PAD_RW__GPIO_3_25 0x06c 0x278 0x000 0x05 0x000 -#define MX25_PAD_NFWE_B__NFWE_B 0x070 0x000 0x000 0x10 0x000 -#define MX25_PAD_NFWE_B__GPIO_3_26 0x070 0x000 0x000 0x15 0x000 +#define MX25_PAD_NFWE_B__NFWE_B 0x070 0x000 0x000 0x00 0x000 +#define MX25_PAD_NFWE_B__GPIO_3_26 0x070 0x000 0x000 0x05 0x000 -#define MX25_PAD_NFRE_B__NFRE_B 0x074 0x000 0x000 0x10 0x000 -#define MX25_PAD_NFRE_B__GPIO_3_27 0x074 0x000 0x000 0x15 0x000 +#define MX25_PAD_NFRE_B__NFRE_B 0x074 0x000 0x000 0x00 0x000 +#define MX25_PAD_NFRE_B__GPIO_3_27 0x074 0x000 0x000 0x05 0x000 -#define MX25_PAD_NFALE__NFALE 0x078 0x000 0x000 0x10 0x000 -#define MX25_PAD_NFALE__GPIO_3_28 0x078 0x000 0x000 0x15 0x000 +#define MX25_PAD_NFALE__NFALE 0x078 0x000 0x000 0x00 0x000 +#define MX25_PAD_NFALE__GPIO_3_28 0x078 0x000 0x000 0x05 0x000 -#define MX25_PAD_NFCLE__NFCLE 0x07c 0x000 0x000 0x10 0x000 -#define MX25_PAD_NFCLE__GPIO_3_29 0x07c 0x000 0x000 0x15 0x000 +#define MX25_PAD_NFCLE__NFCLE 0x07c 0x000 0x000 0x00 0x000 +#define MX25_PAD_NFCLE__GPIO_3_29 0x07c 0x000 0x000 0x05 0x000 -#define MX25_PAD_NFWP_B__NFWP_B 0x080 0x000 0x000 0x10 0x000 -#define MX25_PAD_NFWP_B__GPIO_3_30 0x080 0x000 0x000 0x15 0x000 +#define MX25_PAD_NFWP_B__NFWP_B 0x080 0x000 0x000 0x00 0x000 +#define MX25_PAD_NFWP_B__GPIO_3_30 0x080 0x000 0x000 0x05 0x000 -#define MX25_PAD_NFRB__NFRB 0x084 0x27c 0x000 0x10 0x000 -#define MX25_PAD_NFRB__GPIO_3_31 0x084 0x27c 0x000 0x15 0x000 +#define MX25_PAD_NFRB__NFRB 0x084 0x27c 0x000 0x00 0x000 +#define MX25_PAD_NFRB__GPIO_3_31 0x084 0x27c 0x000 0x05 0x000 #define MX25_PAD_D15__D15 0x088 0x280 0x000 0x00 0x000 #define MX25_PAD_D15__LD16 0x088 0x280 0x000 0x01 0x000 @@ -210,101 +210,101 @@ #define MX25_PAD_D0__D0 0x0c4 0x2bc 0x000 0x00 0x000 #define MX25_PAD_D0__GPIO_4_20 0x0c4 0x2bc 0x000 0x05 0x000 -#define MX25_PAD_LD0__LD0 0x0c8 0x2c0 0x000 0x10 0x000 -#define MX25_PAD_LD0__CSI_D0 0x0c8 0x2c0 0x488 0x12 0x000 -#define MX25_PAD_LD0__GPIO_2_15 0x0c8 0x2c0 0x000 0x15 0x000 +#define MX25_PAD_LD0__LD0 0x0c8 0x2c0 0x000 0x00 0x000 +#define MX25_PAD_LD0__CSI_D0 0x0c8 0x2c0 0x488 0x02 0x000 +#define MX25_PAD_LD0__GPIO_2_15 0x0c8 0x2c0 0x000 0x05 0x000 -#define MX25_PAD_LD1__LD1 0x0cc 0x2c4 0x000 0x10 0x000 -#define MX25_PAD_LD1__CSI_D1 0x0cc 0x2c4 0x48c 0x12 0x000 -#define MX25_PAD_LD1__GPIO_2_16 0x0cc 0x2c4 0x000 0x15 0x000 +#define MX25_PAD_LD1__LD1 0x0cc 0x2c4 0x000 0x00 0x000 +#define MX25_PAD_LD1__CSI_D1 0x0cc 0x2c4 0x48c 0x02 0x000 +#define MX25_PAD_LD1__GPIO_2_16 0x0cc 0x2c4 0x000 0x05 0x000 -#define MX25_PAD_LD2__LD2 0x0d0 0x2c8 0x000 0x10 0x000 -#define MX25_PAD_LD2__GPIO_2_17 0x0d0 0x2c8 0x000 0x15 0x000 +#define MX25_PAD_LD2__LD2 0x0d0 0x2c8 0x000 0x00 0x000 +#define MX25_PAD_LD2__GPIO_2_17 0x0d0 0x2c8 0x000 0x05 0x000 -#define MX25_PAD_LD3__LD3 0x0d4 0x2cc 0x000 0x10 0x000 -#define MX25_PAD_LD3__GPIO_2_18 0x0d4 0x2cc 0x000 0x15 0x000 +#define MX25_PAD_LD3__LD3 0x0d4 0x2cc 0x000 0x00 0x000 +#define MX25_PAD_LD3__GPIO_2_18 0x0d4 0x2cc 0x000 0x05 0x000 -#define MX25_PAD_LD4__LD4 0x0d8 0x2d0 0x000 0x10 0x000 -#define MX25_PAD_LD4__GPIO_2_19 0x0d8 0x2d0 0x000 0x15 0x000 +#define MX25_PAD_LD4__LD4 0x0d8 0x2d0 0x000 0x00 0x000 +#define MX25_PAD_LD4__GPIO_2_19 0x0d8 0x2d0 0x000 0x05 0x000 -#define MX25_PAD_LD5__LD5 0x0dc 0x2d4 0x000 0x10 0x000 -#define MX25_PAD_LD5__GPIO_1_19 0x0dc 0x2d4 0x000 0x15 0x000 +#define MX25_PAD_LD5__LD5 0x0dc 0x2d4 0x000 0x00 0x000 +#define MX25_PAD_LD5__GPIO_1_19 0x0dc 0x2d4 0x000 0x05 0x000 -#define MX25_PAD_LD6__LD6 0x0e0 0x2d8 0x000 0x10 0x000 -#define MX25_PAD_LD6__GPIO_1_20 0x0e0 0x2d8 0x000 0x15 0x000 +#define MX25_PAD_LD6__LD6 0x0e0 0x2d8 0x000 0x00 0x000 +#define MX25_PAD_LD6__GPIO_1_20 0x0e0 0x2d8 0x000 0x05 0x000 -#define MX25_PAD_LD7__LD7 0x0e4 0x2dc 0x000 0x10 0x000 -#define MX25_PAD_LD7__GPIO_1_21 0x0e4 0x2dc 0x000 0x15 0x000 +#define MX25_PAD_LD7__LD7 0x0e4 0x2dc 0x000 0x00 0x000 +#define MX25_PAD_LD7__GPIO_1_21 0x0e4 0x2dc 0x000 0x05 0x000 -#define MX25_PAD_LD8__LD8 0x0e8 0x2e0 0x000 0x10 0x000 -#define MX25_PAD_LD8__UART4_RXD 0x0e8 0x2e0 0x570 0x12 0x000 -#define MX25_PAD_LD8__FEC_TX_ERR 0x0e8 0x2e0 0x000 0x15 0x000 +#define MX25_PAD_LD8__LD8 0x0e8 0x2e0 0x000 0x00 0x000 +#define MX25_PAD_LD8__UART4_RXD 0x0e8 0x2e0 0x570 0x02 0x000 +#define MX25_PAD_LD8__FEC_TX_ERR 0x0e8 0x2e0 0x000 0x05 0x000 #define MX25_PAD_LD8__SDHC2_CMD 0x0e8 0x2e0 0x4e0 0x06 0x000 -#define MX25_PAD_LD9__LD9 0x0ec 0x2e4 0x000 0x10 0x000 -#define MX25_PAD_LD9__UART4_TXD 0x0ec 0x2e4 0x000 0x12 0x000 -#define MX25_PAD_LD9__FEC_COL 0x0ec 0x2e4 0x504 0x15 0x001 +#define MX25_PAD_LD9__LD9 0x0ec 0x2e4 0x000 0x00 0x000 +#define MX25_PAD_LD9__UART4_TXD 0x0ec 0x2e4 0x000 0x02 0x000 +#define MX25_PAD_LD9__FEC_COL 0x0ec 0x2e4 0x504 0x05 0x001 #define MX25_PAD_LD9__SDHC2_CLK 0x0ec 0x2e4 0x4dc 0x06 0x000 #define MX25_PAD_LD10__LD10 0x0f0 0x2e8 0x000 0x00 0x000 #define MX25_PAD_LD10__UART4_RTS 0x0f0 0x2e8 0x56c 0x02 0x000 #define MX25_PAD_LD10__FEC_RX_ERR 0x0f0 0x2e8 0x518 0x05 0x001 -#define MX25_PAD_LD11__LD11 0x0f4 0x2ec 0x000 0x10 0x000 -#define MX25_PAD_LD11__UART4_CTS 0x0f4 0x2ec 0x000 0x12 0x000 -#define MX25_PAD_LD11__FEC_RDATA2 0x0f4 0x2ec 0x50c 0x15 0x001 +#define MX25_PAD_LD11__LD11 0x0f4 0x2ec 0x000 0x00 0x000 +#define MX25_PAD_LD11__UART4_CTS 0x0f4 0x2ec 0x000 0x02 0x000 +#define MX25_PAD_LD11__FEC_RDATA2 0x0f4 0x2ec 0x50c 0x05 0x001 #define MX25_PAD_LD11__SDHC2_DAT1 0x0f4 0x2ec 0x4e8 0x06 0x000 -#define MX25_PAD_LD12__LD12 0x0f8 0x2f0 0x000 0x10 0x000 +#define MX25_PAD_LD12__LD12 0x0f8 0x2f0 0x000 0x00 0x000 #define MX25_PAD_LD12__CSPI2_MOSI 0x0f8 0x2f0 0x4a0 0x02 0x000 -#define MX25_PAD_LD12__FEC_RDATA3 0x0f8 0x2f0 0x510 0x15 0x001 +#define MX25_PAD_LD12__FEC_RDATA3 0x0f8 0x2f0 0x510 0x05 0x001 -#define MX25_PAD_LD13__LD13 0x0fc 0x2f4 0x000 0x10 0x000 +#define MX25_PAD_LD13__LD13 0x0fc 0x2f4 0x000 0x00 0x000 #define MX25_PAD_LD13__CSPI2_MISO 0x0fc 0x2f4 0x49c 0x02 0x000 -#define MX25_PAD_LD13__FEC_TDATA2 0x0fc 0x2f4 0x000 0x15 0x000 +#define MX25_PAD_LD13__FEC_TDATA2 0x0fc 0x2f4 0x000 0x05 0x000 -#define MX25_PAD_LD14__LD14 0x100 0x2f8 0x000 0x10 0x000 +#define MX25_PAD_LD14__LD14 0x100 0x2f8 0x000 0x00 0x000 #define MX25_PAD_LD14__CSPI2_SCLK 0x100 0x2f8 0x494 0x02 0x000 -#define MX25_PAD_LD14__FEC_TDATA3 0x100 0x2f8 0x000 0x15 0x000 +#define MX25_PAD_LD14__FEC_TDATA3 0x100 0x2f8 0x000 0x05 0x000 -#define MX25_PAD_LD15__LD15 0x104 0x2fc 0x000 0x10 0x000 +#define MX25_PAD_LD15__LD15 0x104 0x2fc 0x000 0x00 0x000 #define MX25_PAD_LD15__CSPI2_RDY 0x104 0x2fc 0x498 0x02 0x000 -#define MX25_PAD_LD15__FEC_RX_CLK 0x104 0x2fc 0x514 0x15 0x001 +#define MX25_PAD_LD15__FEC_RX_CLK 0x104 0x2fc 0x514 0x05 0x001 -#define MX25_PAD_HSYNC__HSYNC 0x108 0x300 0x000 0x10 0x000 -#define MX25_PAD_HSYNC__GPIO_1_22 0x108 0x300 0x000 0x15 0x000 +#define MX25_PAD_HSYNC__HSYNC 0x108 0x300 0x000 0x00 0x000 +#define MX25_PAD_HSYNC__GPIO_1_22 0x108 0x300 0x000 0x05 0x000 -#define MX25_PAD_VSYNC__VSYNC 0x10c 0x304 0x000 0x10 0x000 -#define MX25_PAD_VSYNC__GPIO_1_23 0x10c 0x304 0x000 0x15 0x000 +#define MX25_PAD_VSYNC__VSYNC 0x10c 0x304 0x000 0x00 0x000 +#define MX25_PAD_VSYNC__GPIO_1_23 0x10c 0x304 0x000 0x05 0x000 -#define MX25_PAD_LSCLK__LSCLK 0x110 0x308 0x000 0x10 0x000 -#define MX25_PAD_LSCLK__GPIO_1_24 0x110 0x308 0x000 0x15 0x000 +#define MX25_PAD_LSCLK__LSCLK 0x110 0x308 0x000 0x00 0x000 +#define MX25_PAD_LSCLK__GPIO_1_24 0x110 0x308 0x000 0x05 0x000 -#define MX25_PAD_OE_ACD__OE_ACD 0x114 0x30c 0x000 0x10 0x000 +#define MX25_PAD_OE_ACD__OE_ACD 0x114 0x30c 0x000 0x00 0x000 #define MX25_PAD_OE_ACD__CSPI2_SS0 0x114 0x30c 0x4a4 0x02 0x000 -#define MX25_PAD_OE_ACD__GPIO_1_25 0x114 0x30c 0x000 0x15 0x000 +#define MX25_PAD_OE_ACD__GPIO_1_25 0x114 0x30c 0x000 0x05 0x000 -#define MX25_PAD_CONTRAST__CONTRAST 0x118 0x310 0x000 0x10 0x000 -#define MX25_PAD_CONTRAST__CC4 0x118 0x310 0x000 0x11 0x000 -#define MX25_PAD_CONTRAST__PWM4_PWMO 0x118 0x310 0x000 0x14 0x000 -#define MX25_PAD_CONTRAST__FEC_CRS 0x118 0x310 0x508 0x15 0x001 -#define MX25_PAD_CONTRAST__USBH2_PWR 0x118 0x310 0x000 0x16 0x000 +#define MX25_PAD_CONTRAST__CONTRAST 0x118 0x310 0x000 0x00 0x000 +#define MX25_PAD_CONTRAST__CC4 0x118 0x310 0x000 0x01 0x000 +#define MX25_PAD_CONTRAST__PWM4_PWMO 0x118 0x310 0x000 0x04 0x000 +#define MX25_PAD_CONTRAST__FEC_CRS 0x118 0x310 0x508 0x05 0x001 +#define MX25_PAD_CONTRAST__USBH2_PWR 0x118 0x310 0x000 0x06 0x000 -#define MX25_PAD_PWM__PWM 0x11c 0x314 0x000 0x10 0x000 -#define MX25_PAD_PWM__GPIO_1_26 0x11c 0x314 0x000 0x15 0x000 -#define MX25_PAD_PWM__USBH2_OC 0x11c 0x314 0x580 0x16 0x001 +#define MX25_PAD_PWM__PWM 0x11c 0x314 0x000 0x00 0x000 +#define MX25_PAD_PWM__GPIO_1_26 0x11c 0x314 0x000 0x05 0x000 +#define MX25_PAD_PWM__USBH2_OC 0x11c 0x314 0x580 0x06 0x001 -#define MX25_PAD_CSI_D2__CSI_D2 0x120 0x318 0x000 0x10 0x000 -#define MX25_PAD_CSI_D2__UART5_RXD 0x120 0x318 0x578 0x11 0x001 +#define MX25_PAD_CSI_D2__CSI_D2 0x120 0x318 0x000 0x00 0x000 +#define MX25_PAD_CSI_D2__UART5_RXD 0x120 0x318 0x578 0x01 0x001 #define MX25_PAD_CSI_D2__SIM1_CLK0 0x120 0x318 0x000 0x04 0x000 -#define MX25_PAD_CSI_D2__GPIO_1_27 0x120 0x318 0x000 0x15 0x000 -#define MX25_PAD_CSI_D2__CSPI3_MOSI 0x120 0x318 0x000 0x17 0x000 +#define MX25_PAD_CSI_D2__GPIO_1_27 0x120 0x318 0x000 0x05 0x000 +#define MX25_PAD_CSI_D2__CSPI3_MOSI 0x120 0x318 0x000 0x07 0x000 -#define MX25_PAD_CSI_D3__CSI_D3 0x124 0x31c 0x000 0x10 0x000 -#define MX25_PAD_CSI_D3__UART5_TXD 0x124 0x31c 0x000 0x11 0x000 +#define MX25_PAD_CSI_D3__CSI_D3 0x124 0x31c 0x000 0x00 0x000 +#define MX25_PAD_CSI_D3__UART5_TXD 0x124 0x31c 0x000 0x01 0x000 #define MX25_PAD_CSI_D3__SIM1_RST0 0x124 0x31c 0x000 0x04 0x000 -#define MX25_PAD_CSI_D3__GPIO_1_28 0x124 0x31c 0x000 0x15 0x000 -#define MX25_PAD_CSI_D3__CSPI3_MISO 0x124 0x31c 0x4b4 0x17 0x001 +#define MX25_PAD_CSI_D3__GPIO_1_28 0x124 0x31c 0x000 0x05 0x000 +#define MX25_PAD_CSI_D3__CSPI3_MISO 0x124 0x31c 0x4b4 0x07 0x001 #define MX25_PAD_CSI_D4__CSI_D4 0x128 0x320 0x000 0x00 0x000 #define MX25_PAD_CSI_D4__UART5_RTS 0x128 0x320 0x574 0x01 0x001 @@ -312,80 +312,80 @@ #define MX25_PAD_CSI_D4__GPIO_1_29 0x128 0x320 0x000 0x05 0x000 #define MX25_PAD_CSI_D4__CSPI3_SCLK 0x128 0x320 0x000 0x07 0x000 -#define MX25_PAD_CSI_D5__CSI_D5 0x12c 0x324 0x000 0x10 0x000 -#define MX25_PAD_CSI_D5__UART5_CTS 0x12c 0x324 0x000 0x11 0x000 +#define MX25_PAD_CSI_D5__CSI_D5 0x12c 0x324 0x000 0x00 0x000 +#define MX25_PAD_CSI_D5__UART5_CTS 0x12c 0x324 0x000 0x01 0x000 #define MX25_PAD_CSI_D5__SIM1_TX0 0x12c 0x324 0x000 0x04 0x000 -#define MX25_PAD_CSI_D5__GPIO_1_30 0x12c 0x324 0x000 0x15 0x000 -#define MX25_PAD_CSI_D5__CSPI3_RDY 0x12c 0x324 0x000 0x17 0x000 +#define MX25_PAD_CSI_D5__GPIO_1_30 0x12c 0x324 0x000 0x05 0x000 +#define MX25_PAD_CSI_D5__CSPI3_RDY 0x12c 0x324 0x000 0x07 0x000 -#define MX25_PAD_CSI_D6__CSI_D6 0x130 0x328 0x000 0x10 0x000 -#define MX25_PAD_CSI_D6__SDHC2_CMD 0x130 0x328 0x4e0 0x12 0x001 +#define MX25_PAD_CSI_D6__CSI_D6 0x130 0x328 0x000 0x00 0x000 +#define MX25_PAD_CSI_D6__SDHC2_CMD 0x130 0x328 0x4e0 0x02 0x001 #define MX25_PAD_CSI_D6__SIM1_PD0 0x130 0x328 0x000 0x04 0x000 -#define MX25_PAD_CSI_D6__GPIO_1_31 0x130 0x328 0x000 0x15 0x000 +#define MX25_PAD_CSI_D6__GPIO_1_31 0x130 0x328 0x000 0x05 0x000 -#define MX25_PAD_CSI_D7__CSI_D7 0x134 0x32c 0x000 0x10 0x000 -#define MX25_PAD_CSI_D7__SDHC2_DAT_CLK 0x134 0x32C 0x4dc 0x12 0x001 -#define MX25_PAD_CSI_D7__GPIO_1_6 0x134 0x32c 0x000 0x15 0x000 +#define MX25_PAD_CSI_D7__CSI_D7 0x134 0x32c 0x000 0x00 0x000 +#define MX25_PAD_CSI_D7__SDHC2_DAT_CLK 0x134 0x32C 0x4dc 0x02 0x001 +#define MX25_PAD_CSI_D7__GPIO_1_6 0x134 0x32c 0x000 0x05 0x000 -#define MX25_PAD_CSI_D8__CSI_D8 0x138 0x330 0x000 0x10 0x000 -#define MX25_PAD_CSI_D8__AUD6_RXC 0x138 0x330 0x000 0x12 0x000 -#define MX25_PAD_CSI_D8__GPIO_1_7 0x138 0x330 0x000 0x15 0x000 -#define MX25_PAD_CSI_D8__CSPI3_SS2 0x138 0x330 0x4c4 0x17 0x000 +#define MX25_PAD_CSI_D8__CSI_D8 0x138 0x330 0x000 0x00 0x000 +#define MX25_PAD_CSI_D8__AUD6_RXC 0x138 0x330 0x000 0x02 0x000 +#define MX25_PAD_CSI_D8__GPIO_1_7 0x138 0x330 0x000 0x05 0x000 +#define MX25_PAD_CSI_D8__CSPI3_SS2 0x138 0x330 0x4c4 0x07 0x000 -#define MX25_PAD_CSI_D9__CSI_D9 0x13c 0x334 0x000 0x10 0x000 -#define MX25_PAD_CSI_D9__AUD6_RXFS 0x13c 0x334 0x000 0x12 0x000 -#define MX25_PAD_CSI_D9__GPIO_4_21 0x13c 0x334 0x000 0x15 0x000 -#define MX25_PAD_CSI_D9__CSPI3_SS3 0x13c 0x334 0x4c8 0x17 0x000 +#define MX25_PAD_CSI_D9__CSI_D9 0x13c 0x334 0x000 0x00 0x000 +#define MX25_PAD_CSI_D9__AUD6_RXFS 0x13c 0x334 0x000 0x02 0x000 +#define MX25_PAD_CSI_D9__GPIO_4_21 0x13c 0x334 0x000 0x05 0x000 +#define MX25_PAD_CSI_D9__CSPI3_SS3 0x13c 0x334 0x4c8 0x07 0x000 -#define MX25_PAD_CSI_MCLK__CSI_MCLK 0x140 0x338 0x000 0x10 0x000 -#define MX25_PAD_CSI_MCLK__AUD6_TXD 0x140 0x338 0x000 0x11 0x000 -#define MX25_PAD_CSI_MCLK__SDHC2_DAT0 0x140 0x338 0x4e4 0x12 0x001 -#define MX25_PAD_CSI_MCLK__GPIO_1_8 0x140 0x338 0x000 0x15 0x000 +#define MX25_PAD_CSI_MCLK__CSI_MCLK 0x140 0x338 0x000 0x00 0x000 +#define MX25_PAD_CSI_MCLK__AUD6_TXD 0x140 0x338 0x000 0x01 0x000 +#define MX25_PAD_CSI_MCLK__SDHC2_DAT0 0x140 0x338 0x4e4 0x02 0x001 +#define MX25_PAD_CSI_MCLK__GPIO_1_8 0x140 0x338 0x000 0x05 0x000 -#define MX25_PAD_CSI_VSYNC__CSI_VSYNC 0x144 0x33c 0x000 0x10 0x000 -#define MX25_PAD_CSI_VSYNC__AUD6_RXD 0x144 0x33c 0x000 0x11 0x000 -#define MX25_PAD_CSI_VSYNC__SDHC2_DAT1 0x144 0x33c 0x4e8 0x12 0x001 -#define MX25_PAD_CSI_VSYNC__GPIO_1_9 0x144 0x33c 0x000 0x15 0x000 +#define MX25_PAD_CSI_VSYNC__CSI_VSYNC 0x144 0x33c 0x000 0x00 0x000 +#define MX25_PAD_CSI_VSYNC__AUD6_RXD 0x144 0x33c 0x000 0x01 0x000 +#define MX25_PAD_CSI_VSYNC__SDHC2_DAT1 0x144 0x33c 0x4e8 0x02 0x001 +#define MX25_PAD_CSI_VSYNC__GPIO_1_9 0x144 0x33c 0x000 0x05 0x000 -#define MX25_PAD_CSI_HSYNC__CSI_HSYNC 0x148 0x340 0x000 0x10 0x000 -#define MX25_PAD_CSI_HSYNC__AUD6_TXC 0x148 0x340 0x000 0x11 0x000 -#define MX25_PAD_CSI_HSYNC__SDHC2_DAT2 0x148 0x340 0x4ec 0x12 0x001 -#define MX25_PAD_CSI_HSYNC__GPIO_1_10 0x148 0x340 0x000 0x15 0x000 +#define MX25_PAD_CSI_HSYNC__CSI_HSYNC 0x148 0x340 0x000 0x00 0x000 +#define MX25_PAD_CSI_HSYNC__AUD6_TXC 0x148 0x340 0x000 0x01 0x000 +#define MX25_PAD_CSI_HSYNC__SDHC2_DAT2 0x148 0x340 0x4ec 0x02 0x001 +#define MX25_PAD_CSI_HSYNC__GPIO_1_10 0x148 0x340 0x000 0x05 0x000 -#define MX25_PAD_CSI_PIXCLK__CSI_PIXCLK 0x14c 0x344 0x000 0x10 0x000 -#define MX25_PAD_CSI_PIXCLK__AUD6_TXFS 0x14c 0x344 0x000 0x11 0x000 -#define MX25_PAD_CSI_PIXCLK__SDHC2_DAT3 0x14c 0x344 0x4f0 0x12 0x001 -#define MX25_PAD_CSI_PIXCLK__GPIO_1_11 0x14c 0x344 0x000 0x15 0x000 +#define MX25_PAD_CSI_PIXCLK__CSI_PIXCLK 0x14c 0x344 0x000 0x00 0x000 +#define MX25_PAD_CSI_PIXCLK__AUD6_TXFS 0x14c 0x344 0x000 0x01 0x000 +#define MX25_PAD_CSI_PIXCLK__SDHC2_DAT3 0x14c 0x344 0x4f0 0x02 0x001 +#define MX25_PAD_CSI_PIXCLK__GPIO_1_11 0x14c 0x344 0x000 0x05 0x000 -#define MX25_PAD_I2C1_CLK__I2C1_CLK 0x150 0x348 0x000 0x10 0x000 -#define MX25_PAD_I2C1_CLK__GPIO_1_12 0x150 0x348 0x000 0x15 0x000 +#define MX25_PAD_I2C1_CLK__I2C1_CLK 0x150 0x348 0x000 0x00 0x000 +#define MX25_PAD_I2C1_CLK__GPIO_1_12 0x150 0x348 0x000 0x05 0x000 -#define MX25_PAD_I2C1_DAT__I2C1_DAT 0x154 0x34c 0x000 0x10 0x000 -#define MX25_PAD_I2C1_DAT__GPIO_1_13 0x154 0x34c 0x000 0x15 0x000 +#define MX25_PAD_I2C1_DAT__I2C1_DAT 0x154 0x34c 0x000 0x00 0x000 +#define MX25_PAD_I2C1_DAT__GPIO_1_13 0x154 0x34c 0x000 0x05 0x000 -#define MX25_PAD_CSPI1_MOSI__CSPI1_MOSI 0x158 0x350 0x000 0x10 0x000 -#define MX25_PAD_CSPI1_MOSI__UART3_RXD 0x158 0x350 0x568 0x12 0x000 -#define MX25_PAD_CSPI1_MOSI__GPIO_1_14 0x158 0x350 0x000 0x15 0x000 +#define MX25_PAD_CSPI1_MOSI__CSPI1_MOSI 0x158 0x350 0x000 0x00 0x000 +#define MX25_PAD_CSPI1_MOSI__UART3_RXD 0x158 0x350 0x568 0x02 0x000 +#define MX25_PAD_CSPI1_MOSI__GPIO_1_14 0x158 0x350 0x000 0x05 0x000 -#define MX25_PAD_CSPI1_MISO__CSPI1_MISO 0x15c 0x354 0x000 0x10 0x000 -#define MX25_PAD_CSPI1_MISO__UART3_TXD 0x15c 0x354 0x000 0x12 0x000 -#define MX25_PAD_CSPI1_MISO__GPIO_1_15 0x15c 0x354 0x000 0x15 0x000 +#define MX25_PAD_CSPI1_MISO__CSPI1_MISO 0x15c 0x354 0x000 0x00 0x000 +#define MX25_PAD_CSPI1_MISO__UART3_TXD 0x15c 0x354 0x000 0x02 0x000 +#define MX25_PAD_CSPI1_MISO__GPIO_1_15 0x15c 0x354 0x000 0x05 0x000 -#define MX25_PAD_CSPI1_SS0__CSPI1_SS0 0x160 0x358 0x000 0x10 0x000 -#define MX25_PAD_CSPI1_SS0__PWM2_PWMO 0x160 0x358 0x000 0x12 0x000 -#define MX25_PAD_CSPI1_SS0__GPIO_1_16 0x160 0x358 0x000 0x15 0x000 +#define MX25_PAD_CSPI1_SS0__CSPI1_SS0 0x160 0x358 0x000 0x00 0x000 +#define MX25_PAD_CSPI1_SS0__PWM2_PWMO 0x160 0x358 0x000 0x02 0x000 +#define MX25_PAD_CSPI1_SS0__GPIO_1_16 0x160 0x358 0x000 0x05 0x000 #define MX25_PAD_CSPI1_SS1__CSPI1_SS1 0x164 0x35c 0x000 0x00 0x000 #define MX25_PAD_CSPI1_SS1__I2C3_DAT 0x164 0x35C 0x528 0x01 0x001 #define MX25_PAD_CSPI1_SS1__UART3_RTS 0x164 0x35c 0x000 0x02 0x000 #define MX25_PAD_CSPI1_SS1__GPIO_1_17 0x164 0x35c 0x000 0x05 0x000 -#define MX25_PAD_CSPI1_SCLK__CSPI1_SCLK 0x168 0x360 0x000 0x10 0x000 -#define MX25_PAD_CSPI1_SCLK__UART3_CTS 0x168 0x360 0x000 0x12 0x000 -#define MX25_PAD_CSPI1_SCLK__GPIO_1_18 0x168 0x360 0x000 0x15 0x000 +#define MX25_PAD_CSPI1_SCLK__CSPI1_SCLK 0x168 0x360 0x000 0x00 0x000 +#define MX25_PAD_CSPI1_SCLK__UART3_CTS 0x168 0x360 0x000 0x02 0x000 +#define MX25_PAD_CSPI1_SCLK__GPIO_1_18 0x168 0x360 0x000 0x05 0x000 -#define MX25_PAD_CSPI1_RDY__CSPI1_RDY 0x16c 0x364 0x000 0x10 0x000 -#define MX25_PAD_CSPI1_RDY__GPIO_2_22 0x16c 0x364 0x000 0x15 0x000 +#define MX25_PAD_CSPI1_RDY__CSPI1_RDY 0x16c 0x364 0x000 0x00 0x000 +#define MX25_PAD_CSPI1_RDY__GPIO_2_22 0x16c 0x364 0x000 0x05 0x000 #define MX25_PAD_UART1_RXD__UART1_RXD 0x170 0x368 0x000 0x00 0x000 #define MX25_PAD_UART1_RXD__UART2_DTR 0x170 0x368 0x000 0x03 0x000 @@ -406,46 +406,55 @@ #define MX25_PAD_UART1_CTS__UART2_RI 0x17c 0x374 0x000 0x03 0x001 #define MX25_PAD_UART1_CTS__GPIO_4_25 0x17c 0x374 0x000 0x05 0x000 -#define MX25_PAD_UART2_RXD__UART2_RXD 0x180 0x378 0x000 0x10 0x000 -#define MX25_PAD_UART2_RXD__GPIO_4_26 0x180 0x378 0x000 0x15 0x000 +#define MX25_PAD_UART2_RXD__UART2_RXD 0x180 0x378 0x000 0x00 0x000 +#define MX25_PAD_UART2_RXD__GPIO_4_26 0x180 0x378 0x000 0x05 0x000 -#define MX25_PAD_UART2_TXD__UART2_TXD 0x184 0x37c 0x000 0x10 0x000 -#define MX25_PAD_UART2_TXD__GPIO_4_27 0x184 0x37c 0x000 0x15 0x000 +#define MX25_PAD_UART2_TXD__UART2_TXD 0x184 0x37c 0x000 0x00 0x000 +#define MX25_PAD_UART2_TXD__GPIO_4_27 0x184 0x37c 0x000 0x05 0x000 #define MX25_PAD_UART2_RTS__UART2_RTS 0x188 0x380 0x000 0x00 0x000 #define MX25_PAD_UART2_RTS__FEC_COL 0x188 0x380 0x504 0x02 0x002 #define MX25_PAD_UART2_RTS__CC1 0x188 0x380 0x000 0x03 0x000 #define MX25_PAD_UART2_RTS__GPIO_4_28 0x188 0x380 0x000 0x05 0x000 -#define MX25_PAD_UART2_CTS__UART2_CTS 0x18c 0x384 0x000 0x10 0x000 -#define MX25_PAD_UART2_CTS__FEC_RX_ERR 0x18c 0x384 0x518 0x12 0x002 -#define MX25_PAD_UART2_CTS__GPIO_4_29 0x18c 0x384 0x000 0x15 0x000 +#define MX25_PAD_UART2_CTS__UART2_CTS 0x18c 0x384 0x000 0x00 0x000 +#define MX25_PAD_UART2_CTS__FEC_RX_ERR 0x18c 0x384 0x518 0x02 0x002 +#define MX25_PAD_UART2_CTS__GPIO_4_29 0x18c 0x384 0x000 0x05 0x000 +/* + * Removing the SION bit from MX25_PAD_SD1_CMD__SD1_CMD breaks detecting an SD + * card. According to the i.MX25 reference manual (e.g. Figure 23-2 in IMX25RM + * Rev. 2 from 01/2011) this pin is bidirectional. So it seems to be a silicon + * bug that configuring the SD1_CMD function doesn't enable the input path for + * this pin. + * This might have side effects for other hardware units that are connected to + * that pin and use the respective function as input. + */ #define MX25_PAD_SD1_CMD__SD1_CMD 0x190 0x388 0x000 0x10 0x000 -#define MX25_PAD_SD1_CMD__CSPI2_MOSI 0x190 0x388 0x4a0 0x11 0x001 -#define MX25_PAD_SD1_CMD__FEC_RDATA2 0x190 0x388 0x50c 0x12 0x002 -#define MX25_PAD_SD1_CMD__GPIO_2_23 0x190 0x388 0x000 0x15 0x000 +#define MX25_PAD_SD1_CMD__CSPI2_MOSI 0x190 0x388 0x4a0 0x01 0x001 +#define MX25_PAD_SD1_CMD__FEC_RDATA2 0x190 0x388 0x50c 0x02 0x002 +#define MX25_PAD_SD1_CMD__GPIO_2_23 0x190 0x388 0x000 0x05 0x000 -#define MX25_PAD_SD1_CLK__SD1_CLK 0x194 0x38c 0x000 0x10 0x000 -#define MX25_PAD_SD1_CLK__CSPI2_MISO 0x194 0x38c 0x49c 0x11 0x001 -#define MX25_PAD_SD1_CLK__FEC_RDATA3 0x194 0x38c 0x510 0x12 0x002 -#define MX25_PAD_SD1_CLK__GPIO_2_24 0x194 0x38c 0x000 0x15 0x000 +#define MX25_PAD_SD1_CLK__SD1_CLK 0x194 0x38c 0x000 0x00 0x000 +#define MX25_PAD_SD1_CLK__CSPI2_MISO 0x194 0x38c 0x49c 0x01 0x001 +#define MX25_PAD_SD1_CLK__FEC_RDATA3 0x194 0x38c 0x510 0x02 0x002 +#define MX25_PAD_SD1_CLK__GPIO_2_24 0x194 0x38c 0x000 0x05 0x000 -#define MX25_PAD_SD1_DATA0__SD1_DATA0 0x198 0x390 0x000 0x10 0x000 -#define MX25_PAD_SD1_DATA0__CSPI2_SCLK 0x198 0x390 0x494 0x11 0x001 -#define MX25_PAD_SD1_DATA0__GPIO_2_25 0x198 0x390 0x000 0x15 0x000 +#define MX25_PAD_SD1_DATA0__SD1_DATA0 0x198 0x390 0x000 0x00 0x000 +#define MX25_PAD_SD1_DATA0__CSPI2_SCLK 0x198 0x390 0x494 0x01 0x001 +#define MX25_PAD_SD1_DATA0__GPIO_2_25 0x198 0x390 0x000 0x05 0x000 -#define MX25_PAD_SD1_DATA1__SD1_DATA1 0x19c 0x394 0x000 0x10 0x000 -#define MX25_PAD_SD1_DATA1__AUD7_RXD 0x19c 0x394 0x478 0x13 0x000 -#define MX25_PAD_SD1_DATA1__GPIO_2_26 0x19c 0x394 0x000 0x15 0x000 +#define MX25_PAD_SD1_DATA1__SD1_DATA1 0x19c 0x394 0x000 0x00 0x000 +#define MX25_PAD_SD1_DATA1__AUD7_RXD 0x19c 0x394 0x478 0x03 0x000 +#define MX25_PAD_SD1_DATA1__GPIO_2_26 0x19c 0x394 0x000 0x05 0x000 -#define MX25_PAD_SD1_DATA2__SD1_DATA2 0x1a0 0x398 0x000 0x10 0x000 -#define MX25_PAD_SD1_DATA2__FEC_RX_CLK 0x1a0 0x398 0x514 0x12 0x002 -#define MX25_PAD_SD1_DATA2__GPIO_2_27 0x1a0 0x398 0x000 0x15 0x000 +#define MX25_PAD_SD1_DATA2__SD1_DATA2 0x1a0 0x398 0x000 0x00 0x000 +#define MX25_PAD_SD1_DATA2__FEC_RX_CLK 0x1a0 0x398 0x514 0x02 0x002 +#define MX25_PAD_SD1_DATA2__GPIO_2_27 0x1a0 0x398 0x000 0x05 0x000 -#define MX25_PAD_SD1_DATA3__SD1_DATA3 0x1a4 0x39c 0x000 0x10 0x000 -#define MX25_PAD_SD1_DATA3__FEC_CRS 0x1a4 0x39c 0x508 0x12 0x002 -#define MX25_PAD_SD1_DATA3__GPIO_2_28 0x1a4 0x39c 0x000 0x15 0x000 +#define MX25_PAD_SD1_DATA3__SD1_DATA3 0x1a4 0x39c 0x000 0x00 0x000 +#define MX25_PAD_SD1_DATA3__FEC_CRS 0x1a4 0x39c 0x508 0x02 0x002 +#define MX25_PAD_SD1_DATA3__GPIO_2_28 0x1a4 0x39c 0x000 0x05 0x000 #define MX25_PAD_KPP_ROW0__KPP_ROW0 0x1a8 0x3a0 0x000 0x00 0x000 #define MX25_PAD_KPP_ROW0__UART3_RXD 0x1a8 0x3a0 0x568 0x01 0x001 @@ -469,123 +478,123 @@ #define MX25_PAD_KPP_ROW3__UART1_RI 0x1b4 0x3ac 0x000 0x04 0x000 #define MX25_PAD_KPP_ROW3__GPIO_3_0 0x1b4 0x3ac 0x000 0x05 0x000 -#define MX25_PAD_KPP_COL0__KPP_COL0 0x1b8 0x3b0 0x000 0x10 0x000 -#define MX25_PAD_KPP_COL0__UART4_RXD 0x1b8 0x3b0 0x570 0x11 0x001 -#define MX25_PAD_KPP_COL0__AUD5_TXD 0x1b8 0x3b0 0x000 0x12 0x000 -#define MX25_PAD_KPP_COL0__GPIO_3_1 0x1b8 0x3b0 0x000 0x15 0x000 +#define MX25_PAD_KPP_COL0__KPP_COL0 0x1b8 0x3b0 0x000 0x00 0x000 +#define MX25_PAD_KPP_COL0__UART4_RXD 0x1b8 0x3b0 0x570 0x01 0x001 +#define MX25_PAD_KPP_COL0__AUD5_TXD 0x1b8 0x3b0 0x000 0x02 0x000 +#define MX25_PAD_KPP_COL0__GPIO_3_1 0x1b8 0x3b0 0x000 0x05 0x000 -#define MX25_PAD_KPP_COL1__KPP_COL1 0x1bc 0x3b4 0x000 0x10 0x000 -#define MX25_PAD_KPP_COL1__UART4_TXD 0x1bc 0x3b4 0x000 0x11 0x000 -#define MX25_PAD_KPP_COL1__AUD5_RXD 0x1bc 0x3b4 0x000 0x12 0x000 -#define MX25_PAD_KPP_COL1__GPIO_3_2 0x1bc 0x3b4 0x000 0x15 0x000 +#define MX25_PAD_KPP_COL1__KPP_COL1 0x1bc 0x3b4 0x000 0x00 0x000 +#define MX25_PAD_KPP_COL1__UART4_TXD 0x1bc 0x3b4 0x000 0x01 0x000 +#define MX25_PAD_KPP_COL1__AUD5_RXD 0x1bc 0x3b4 0x000 0x02 0x000 +#define MX25_PAD_KPP_COL1__GPIO_3_2 0x1bc 0x3b4 0x000 0x05 0x000 #define MX25_PAD_KPP_COL2__KPP_COL2 0x1c0 0x3b8 0x000 0x00 0x000 #define MX25_PAD_KPP_COL2__UART4_RTS 0x1c0 0x3b8 0x56c 0x01 0x001 #define MX25_PAD_KPP_COL2__AUD5_TXC 0x1c0 0x3b8 0x000 0x02 0x000 #define MX25_PAD_KPP_COL2__GPIO_3_3 0x1c0 0x3b8 0x000 0x05 0x000 -#define MX25_PAD_KPP_COL3__KPP_COL3 0x1c4 0x3bc 0x000 0x10 0x000 -#define MX25_PAD_KPP_COL3__UART4_CTS 0x1c4 0x3bc 0x000 0x11 0x000 -#define MX25_PAD_KPP_COL3__AUD5_TXFS 0x1c4 0x3bc 0x000 0x12 0x000 -#define MX25_PAD_KPP_COL3__GPIO_3_4 0x1c4 0x3bc 0x000 0x15 0x000 +#define MX25_PAD_KPP_COL3__KPP_COL3 0x1c4 0x3bc 0x000 0x00 0x000 +#define MX25_PAD_KPP_COL3__UART4_CTS 0x1c4 0x3bc 0x000 0x01 0x000 +#define MX25_PAD_KPP_COL3__AUD5_TXFS 0x1c4 0x3bc 0x000 0x02 0x000 +#define MX25_PAD_KPP_COL3__GPIO_3_4 0x1c4 0x3bc 0x000 0x05 0x000 -#define MX25_PAD_FEC_MDC__FEC_MDC 0x1c8 0x3c0 0x000 0x10 0x000 -#define MX25_PAD_FEC_MDC__AUD4_TXD 0x1c8 0x3c0 0x464 0x12 0x001 -#define MX25_PAD_FEC_MDC__GPIO_3_5 0x1c8 0x3c0 0x000 0x15 0x000 +#define MX25_PAD_FEC_MDC__FEC_MDC 0x1c8 0x3c0 0x000 0x00 0x000 +#define MX25_PAD_FEC_MDC__AUD4_TXD 0x1c8 0x3c0 0x464 0x02 0x001 +#define MX25_PAD_FEC_MDC__GPIO_3_5 0x1c8 0x3c0 0x000 0x05 0x000 -#define MX25_PAD_FEC_MDIO__FEC_MDIO 0x1cc 0x3c4 0x000 0x10 0x000 -#define MX25_PAD_FEC_MDIO__AUD4_RXD 0x1cc 0x3c4 0x460 0x12 0x001 -#define MX25_PAD_FEC_MDIO__GPIO_3_6 0x1cc 0x3c4 0x000 0x15 0x000 +#define MX25_PAD_FEC_MDIO__FEC_MDIO 0x1cc 0x3c4 0x000 0x00 0x000 +#define MX25_PAD_FEC_MDIO__AUD4_RXD 0x1cc 0x3c4 0x460 0x02 0x001 +#define MX25_PAD_FEC_MDIO__GPIO_3_6 0x1cc 0x3c4 0x000 0x05 0x000 -#define MX25_PAD_FEC_TDATA0__FEC_TDATA0 0x1d0 0x3c8 0x000 0x10 0x000 -#define MX25_PAD_FEC_TDATA0__GPIO_3_7 0x1d0 0x3c8 0x000 0x15 0x000 +#define MX25_PAD_FEC_TDATA0__FEC_TDATA0 0x1d0 0x3c8 0x000 0x00 0x000 +#define MX25_PAD_FEC_TDATA0__GPIO_3_7 0x1d0 0x3c8 0x000 0x05 0x000 -#define MX25_PAD_FEC_TDATA1__FEC_TDATA1 0x1d4 0x3cc 0x000 0x10 0x000 -#define MX25_PAD_FEC_TDATA1__AUD4_TXFS 0x1d4 0x3cc 0x474 0x12 0x001 -#define MX25_PAD_FEC_TDATA1__GPIO_3_8 0x1d4 0x3cc 0x000 0x15 0x000 +#define MX25_PAD_FEC_TDATA1__FEC_TDATA1 0x1d4 0x3cc 0x000 0x00 0x000 +#define MX25_PAD_FEC_TDATA1__AUD4_TXFS 0x1d4 0x3cc 0x474 0x02 0x001 +#define MX25_PAD_FEC_TDATA1__GPIO_3_8 0x1d4 0x3cc 0x000 0x05 0x000 -#define MX25_PAD_FEC_TX_EN__FEC_TX_EN 0x1d8 0x3d0 0x000 0x10 0x000 -#define MX25_PAD_FEC_TX_EN__GPIO_3_9 0x1d8 0x3d0 0x000 0x15 0x000 +#define MX25_PAD_FEC_TX_EN__FEC_TX_EN 0x1d8 0x3d0 0x000 0x00 0x000 +#define MX25_PAD_FEC_TX_EN__GPIO_3_9 0x1d8 0x3d0 0x000 0x05 0x000 -#define MX25_PAD_FEC_RDATA0__FEC_RDATA0 0x1dc 0x3d4 0x000 0x10 0x000 -#define MX25_PAD_FEC_RDATA0__GPIO_3_10 0x1dc 0x3d4 0x000 0x15 0x000 +#define MX25_PAD_FEC_RDATA0__FEC_RDATA0 0x1dc 0x3d4 0x000 0x00 0x000 +#define MX25_PAD_FEC_RDATA0__GPIO_3_10 0x1dc 0x3d4 0x000 0x05 0x000 -#define MX25_PAD_FEC_RDATA1__FEC_RDATA1 0x1e0 0x3d8 0x000 0x10 0x000 +#define MX25_PAD_FEC_RDATA1__FEC_RDATA1 0x1e0 0x3d8 0x000 0x00 0x000 /* * According to the i.MX25 Reference manual (IMX25RM, Rev. 2, * 01/2011) this is CAN1_TX but that's wrong. */ -#define MX25_PAD_FEC_RDATA1__CAN2_TX 0x1e0 0x3d8 0x000 0x14 0x000 -#define MX25_PAD_FEC_RDATA1__GPIO_3_11 0x1e0 0x3d8 0x000 0x15 0x000 +#define MX25_PAD_FEC_RDATA1__CAN2_TX 0x1e0 0x3d8 0x000 0x04 0x000 +#define MX25_PAD_FEC_RDATA1__GPIO_3_11 0x1e0 0x3d8 0x000 0x05 0x000 -#define MX25_PAD_FEC_RX_DV__FEC_RX_DV 0x1e4 0x3dc 0x000 0x10 0x000 +#define MX25_PAD_FEC_RX_DV__FEC_RX_DV 0x1e4 0x3dc 0x000 0x00 0x000 /* * According to the i.MX25 Reference manual (IMX25RM, Rev. 2, * 01/2011) this is CAN1_RX but that's wrong. */ -#define MX25_PAD_FEC_RX_DV__CAN2_RX 0x1e4 0x3dc 0x484 0x14 0x000 -#define MX25_PAD_FEC_RX_DV__GPIO_3_12 0x1e4 0x3dc 0x000 0x15 0x000 +#define MX25_PAD_FEC_RX_DV__CAN2_RX 0x1e4 0x3dc 0x484 0x04 0x000 +#define MX25_PAD_FEC_RX_DV__GPIO_3_12 0x1e4 0x3dc 0x000 0x05 0x000 -#define MX25_PAD_FEC_TX_CLK__FEC_TX_CLK 0x1e8 0x3e0 0x000 0x10 0x000 -#define MX25_PAD_FEC_TX_CLK__GPIO_3_13 0x1e8 0x3e0 0x000 0x15 0x000 +#define MX25_PAD_FEC_TX_CLK__FEC_TX_CLK 0x1e8 0x3e0 0x000 0x00 0x000 +#define MX25_PAD_FEC_TX_CLK__GPIO_3_13 0x1e8 0x3e0 0x000 0x05 0x000 -#define MX25_PAD_RTCK__RTCK 0x1ec 0x3e4 0x000 0x10 0x000 -#define MX25_PAD_RTCK__OWIRE 0x1ec 0x3e4 0x000 0x11 0x000 -#define MX25_PAD_RTCK__GPIO_3_14 0x1ec 0x3e4 0x000 0x15 0x000 +#define MX25_PAD_RTCK__RTCK 0x1ec 0x3e4 0x000 0x00 0x000 +#define MX25_PAD_RTCK__OWIRE 0x1ec 0x3e4 0x000 0x01 0x000 +#define MX25_PAD_RTCK__GPIO_3_14 0x1ec 0x3e4 0x000 0x05 0x000 -#define MX25_PAD_DE_B__DE_B 0x1f0 0x3ec 0x000 0x10 0x000 -#define MX25_PAD_DE_B__GPIO_2_20 0x1f0 0x3ec 0x000 0x15 0x000 +#define MX25_PAD_DE_B__DE_B 0x1f0 0x3ec 0x000 0x00 0x000 +#define MX25_PAD_DE_B__GPIO_2_20 0x1f0 0x3ec 0x000 0x05 0x000 -#define MX25_PAD_GPIO_A__GPIO_A 0x1f4 0x3f0 0x000 0x10 0x000 -#define MX25_PAD_GPIO_A__CAN1_TX 0x1f4 0x3f0 0x000 0x16 0x000 -#define MX25_PAD_GPIO_A__USBOTG_PWR 0x1f4 0x3f0 0x000 0x12 0x000 +#define MX25_PAD_GPIO_A__GPIO_A 0x1f4 0x3f0 0x000 0x00 0x000 +#define MX25_PAD_GPIO_A__CAN1_TX 0x1f4 0x3f0 0x000 0x06 0x000 +#define MX25_PAD_GPIO_A__USBOTG_PWR 0x1f4 0x3f0 0x000 0x02 0x000 -#define MX25_PAD_GPIO_B__GPIO_B 0x1f8 0x3f4 0x000 0x10 0x000 -#define MX25_PAD_GPIO_B__USBOTG_OC 0x1f8 0x3f4 0x57c 0x12 0x001 -#define MX25_PAD_GPIO_B__CAN1_RX 0x1f8 0x3f4 0x480 0x16 0x001 +#define MX25_PAD_GPIO_B__GPIO_B 0x1f8 0x3f4 0x000 0x00 0x000 +#define MX25_PAD_GPIO_B__USBOTG_OC 0x1f8 0x3f4 0x57c 0x02 0x001 +#define MX25_PAD_GPIO_B__CAN1_RX 0x1f8 0x3f4 0x480 0x06 0x001 -#define MX25_PAD_GPIO_C__GPIO_C 0x1fc 0x3f8 0x000 0x10 0x000 -#define MX25_PAD_GPIO_C__PWM4_PWMO 0x1fc 0x3f8 0x000 0x11 0x000 -#define MX25_PAD_GPIO_C__I2C2_SCL 0x1fc 0x3f8 0x51c 0x12 0x001 -#define MX25_PAD_GPIO_C__KPP_COL4 0x1fc 0x3f8 0x52c 0x13 0x001 -#define MX25_PAD_GPIO_C__CAN2_TX 0x1fc 0x3f8 0x000 0x16 0x000 +#define MX25_PAD_GPIO_C__GPIO_C 0x1fc 0x3f8 0x000 0x00 0x000 +#define MX25_PAD_GPIO_C__PWM4_PWMO 0x1fc 0x3f8 0x000 0x01 0x000 +#define MX25_PAD_GPIO_C__I2C2_SCL 0x1fc 0x3f8 0x51c 0x02 0x001 +#define MX25_PAD_GPIO_C__KPP_COL4 0x1fc 0x3f8 0x52c 0x03 0x001 +#define MX25_PAD_GPIO_C__CAN2_TX 0x1fc 0x3f8 0x000 0x06 0x000 -#define MX25_PAD_GPIO_D__GPIO_D 0x200 0x3fc 0x000 0x10 0x000 -#define MX25_PAD_GPIO_D__I2C2_SDA 0x200 0x3fc 0x520 0x12 0x001 -#define MX25_PAD_GPIO_D__CAN2_RX 0x200 0x3fc 0x484 0x16 0x001 +#define MX25_PAD_GPIO_D__GPIO_D 0x200 0x3fc 0x000 0x00 0x000 +#define MX25_PAD_GPIO_D__I2C2_SDA 0x200 0x3fc 0x520 0x02 0x001 +#define MX25_PAD_GPIO_D__CAN2_RX 0x200 0x3fc 0x484 0x06 0x001 -#define MX25_PAD_GPIO_E__GPIO_E 0x204 0x400 0x000 0x10 0x000 -#define MX25_PAD_GPIO_E__I2C3_CLK 0x204 0x400 0x524 0x11 0x002 -#define MX25_PAD_GPIO_E__LD16 0x204 0x400 0x000 0x12 0x000 -#define MX25_PAD_GPIO_E__AUD7_TXD 0x204 0x400 0x000 0x14 0x000 -#define MX25_PAD_GPIO_E__UART4_RXD 0x204 0x400 0x570 0x16 0x002 +#define MX25_PAD_GPIO_E__GPIO_E 0x204 0x400 0x000 0x00 0x000 +#define MX25_PAD_GPIO_E__I2C3_CLK 0x204 0x400 0x524 0x01 0x002 +#define MX25_PAD_GPIO_E__LD16 0x204 0x400 0x000 0x02 0x000 +#define MX25_PAD_GPIO_E__AUD7_TXD 0x204 0x400 0x000 0x04 0x000 +#define MX25_PAD_GPIO_E__UART4_RXD 0x204 0x400 0x570 0x06 0x002 -#define MX25_PAD_GPIO_F__GPIO_F 0x208 0x404 0x000 0x10 0x000 -#define MX25_PAD_GPIO_F__LD17 0x208 0x404 0x000 0x12 0x000 -#define MX25_PAD_GPIO_F__AUD7_TXC 0x208 0x404 0x000 0x14 0x000 -#define MX25_PAD_GPIO_F__UART4_TXD 0x208 0x404 0x000 0x16 0x000 +#define MX25_PAD_GPIO_F__GPIO_F 0x208 0x404 0x000 0x00 0x000 +#define MX25_PAD_GPIO_F__LD17 0x208 0x404 0x000 0x02 0x000 +#define MX25_PAD_GPIO_F__AUD7_TXC 0x208 0x404 0x000 0x04 0x000 +#define MX25_PAD_GPIO_F__UART4_TXD 0x208 0x404 0x000 0x06 0x000 -#define MX25_PAD_EXT_ARMCLK__EXT_ARMCLK 0x20c 0x000 0x000 0x10 0x000 -#define MX25_PAD_EXT_ARMCLK__GPIO_3_15 0x20c 0x000 0x000 0x15 0x000 +#define MX25_PAD_EXT_ARMCLK__EXT_ARMCLK 0x20c 0x000 0x000 0x00 0x000 +#define MX25_PAD_EXT_ARMCLK__GPIO_3_15 0x20c 0x000 0x000 0x05 0x000 -#define MX25_PAD_UPLL_BYPCLK__UPLL_BYPCLK 0x210 0x000 0x000 0x10 0x000 -#define MX25_PAD_UPLL_BYPCLK__GPIO_3_16 0x210 0x000 0x000 0x15 0x000 +#define MX25_PAD_UPLL_BYPCLK__UPLL_BYPCLK 0x210 0x000 0x000 0x00 0x000 +#define MX25_PAD_UPLL_BYPCLK__GPIO_3_16 0x210 0x000 0x000 0x05 0x000 #define MX25_PAD_VSTBY_REQ__VSTBY_REQ 0x214 0x408 0x000 0x00 0x000 #define MX25_PAD_VSTBY_REQ__AUD7_TXFS 0x214 0x408 0x000 0x04 0x000 #define MX25_PAD_VSTBY_REQ__GPIO_3_17 0x214 0x408 0x000 0x05 0x000 #define MX25_PAD_VSTBY_REQ__UART4_RTS 0x214 0x408 0x56c 0x06 0x002 -#define MX25_PAD_VSTBY_ACK__VSTBY_ACK 0x218 0x40c 0x000 0x10 0x000 -#define MX25_PAD_VSTBY_ACK__GPIO_3_18 0x218 0x40c 0x000 0x15 0x000 +#define MX25_PAD_VSTBY_ACK__VSTBY_ACK 0x218 0x40c 0x000 0x00 0x000 +#define MX25_PAD_VSTBY_ACK__GPIO_3_18 0x218 0x40c 0x000 0x05 0x000 -#define MX25_PAD_POWER_FAIL__POWER_FAIL 0x21c 0x410 0x000 0x10 0x000 -#define MX25_PAD_POWER_FAIL__AUD7_RXD 0x21c 0x410 0x478 0x14 0x001 -#define MX25_PAD_POWER_FAIL__GPIO_3_19 0x21c 0x410 0x000 0x15 0x000 -#define MX25_PAD_POWER_FAIL__UART4_CTS 0x21c 0x410 0x000 0x16 0x000 +#define MX25_PAD_POWER_FAIL__POWER_FAIL 0x21c 0x410 0x000 0x00 0x000 +#define MX25_PAD_POWER_FAIL__AUD7_RXD 0x21c 0x410 0x478 0x04 0x001 +#define MX25_PAD_POWER_FAIL__GPIO_3_19 0x21c 0x410 0x000 0x05 0x000 +#define MX25_PAD_POWER_FAIL__UART4_CTS 0x21c 0x410 0x000 0x06 0x000 -#define MX25_PAD_CLKO__CLKO 0x220 0x414 0x000 0x10 0x000 -#define MX25_PAD_CLKO__GPIO_2_21 0x220 0x414 0x000 0x15 0x000 +#define MX25_PAD_CLKO__CLKO 0x220 0x414 0x000 0x00 0x000 +#define MX25_PAD_CLKO__GPIO_2_21 0x220 0x414 0x000 0x05 0x000 #define MX25_PAD_BOOT_MODE0__BOOT_MODE0 0x224 0x000 0x000 0x00 0x000 #define MX25_PAD_BOOT_MODE0__GPIO_4_30 0x224 0x000 0x000 0x05 0x000 diff --git a/arch/arm/boot/dts/imx27-eukrea-cpuimx27.dtsi b/arch/arm/boot/dts/imx27-eukrea-cpuimx27.dtsi index e2242638e..2cf896c50 100644 --- a/arch/arm/boot/dts/imx27-eukrea-cpuimx27.dtsi +++ b/arch/arm/boot/dts/imx27-eukrea-cpuimx27.dtsi @@ -77,7 +77,7 @@ &uart4 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart4>; - fsl,uart-has-rtscts; + uart-has-rtscts; status = "okay"; }; diff --git a/arch/arm/boot/dts/imx27-eukrea-mbimxsd27-baseboard.dts b/arch/arm/boot/dts/imx27-eukrea-mbimxsd27-baseboard.dts index 2ab65fc4c..27846ff9b 100644 --- a/arch/arm/boot/dts/imx27-eukrea-mbimxsd27-baseboard.dts +++ b/arch/arm/boot/dts/imx27-eukrea-mbimxsd27-baseboard.dts @@ -140,21 +140,21 @@ }; &uart1 { - fsl,uart-has-rtscts; + uart-has-rtscts; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart1>; status = "okay"; }; &uart2 { - fsl,uart-has-rtscts; + uart-has-rtscts; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart2>; status = "okay"; }; &uart3 { - fsl,uart-has-rtscts; + uart-has-rtscts; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart3>; status = "okay"; diff --git a/arch/arm/boot/dts/imx27-pdk.dts b/arch/arm/boot/dts/imx27-pdk.dts index 49450dbbc..d0ef496a1 100644 --- a/arch/arm/boot/dts/imx27-pdk.dts +++ b/arch/arm/boot/dts/imx27-pdk.dts @@ -106,7 +106,7 @@ }; &uart1 { - fsl,uart-has-rtscts; + uart-has-rtscts; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart1>; status = "okay"; diff --git a/arch/arm/boot/dts/imx27-phytec-phycard-s-rdk.dts b/arch/arm/boot/dts/imx27-phytec-phycard-s-rdk.dts index 7c869fe3c..bfd4946cf 100644 --- a/arch/arm/boot/dts/imx27-phytec-phycard-s-rdk.dts +++ b/arch/arm/boot/dts/imx27-phytec-phycard-s-rdk.dts @@ -147,21 +147,21 @@ }; &uart1 { - fsl,uart-has-rtscts; + uart-has-rtscts; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart1>; status = "okay"; }; &uart2 { - fsl,uart-has-rtscts; + uart-has-rtscts; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart2>; status = "okay"; }; &uart3 { - fsl,uart-has-rtscts; + uart-has-rtscts; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart3>; status = "okay"; diff --git a/arch/arm/boot/dts/imx27-phytec-phycore-rdk.dts b/arch/arm/boot/dts/imx27-phytec-phycore-rdk.dts index 538568b0d..cf09e72ae 100644 --- a/arch/arm/boot/dts/imx27-phytec-phycore-rdk.dts +++ b/arch/arm/boot/dts/imx27-phytec-phycore-rdk.dts @@ -283,14 +283,14 @@ }; &uart1 { - fsl,uart-has-rtscts; + uart-has-rtscts; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart1>; status = "okay"; }; &uart2 { - fsl,uart-has-rtscts; + uart-has-rtscts; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart2>; status = "okay"; diff --git a/arch/arm/boot/dts/imx28-apf28dev.dts b/arch/arm/boot/dts/imx28-apf28dev.dts index 1eaa131e2..c4fadbc1b 100644 --- a/arch/arm/boot/dts/imx28-apf28dev.dts +++ b/arch/arm/boot/dts/imx28-apf28dev.dts @@ -140,7 +140,7 @@ auart0: serial@8006a000 { pinctrl-names = "default"; pinctrl-0 = <&auart0_pins_a>; - fsl,uart-has-rtscts; + uart-has-rtscts; status = "okay"; }; diff --git a/arch/arm/boot/dts/imx28-cfa10049.dts b/arch/arm/boot/dts/imx28-cfa10049.dts index ef944b6d4..a9c347e48 100644 --- a/arch/arm/boot/dts/imx28-cfa10049.dts +++ b/arch/arm/boot/dts/imx28-cfa10049.dts @@ -426,7 +426,7 @@ }; - onewire@0 { + onewire { compatible = "w1-gpio"; pinctrl-names = "default"; pinctrl-0 = <&w1_gpio_pins>; diff --git a/arch/arm/boot/dts/imx28-eukrea-mbmx28lc.dtsi b/arch/arm/boot/dts/imx28-eukrea-mbmx28lc.dtsi index 88594747f..581e85f4f 100644 --- a/arch/arm/boot/dts/imx28-eukrea-mbmx28lc.dtsi +++ b/arch/arm/boot/dts/imx28-eukrea-mbmx28lc.dtsi @@ -84,6 +84,7 @@ reg_3p3v: regulator@0 { compatible = "regulator-fixed"; + reg = <0>; regulator-name = "3P3V"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; @@ -92,6 +93,7 @@ reg_lcd_3v3: regulator@1 { compatible = "regulator-fixed"; + reg = <1>; pinctrl-names = "default"; pinctrl-0 = <®_lcd_3v3_pins_mbmx28lc>; regulator-name = "lcd-3v3"; @@ -103,6 +105,7 @@ reg_usb0_vbus: regulator@2 { compatible = "regulator-fixed"; + reg = <2>; pinctrl-names = "default"; pinctrl-0 = <®_usb0_vbus_pins_mbmx28lc>; regulator-name = "usb0_vbus"; @@ -114,6 +117,7 @@ reg_usb1_vbus: regulator@3 { compatible = "regulator-fixed"; + reg = <3>; pinctrl-names = "default"; pinctrl-0 = <®_usb1_vbus_pins_mbmx28lc>; regulator-name = "usb1_vbus"; diff --git a/arch/arm/boot/dts/imx28-evk.dts b/arch/arm/boot/dts/imx28-evk.dts index e3ef94ac1..a5ba669b4 100644 --- a/arch/arm/boot/dts/imx28-evk.dts +++ b/arch/arm/boot/dts/imx28-evk.dts @@ -224,7 +224,7 @@ auart0: serial@8006a000 { pinctrl-names = "default"; pinctrl-0 = <&auart0_pins_a>; - fsl,uart-has-rtscts; + uart-has-rtscts; status = "okay"; }; diff --git a/arch/arm/boot/dts/imx28-m28.dtsi b/arch/arm/boot/dts/imx28-m28.dtsi index 6cebaa6b8..214bb1506 100644 --- a/arch/arm/boot/dts/imx28-m28.dtsi +++ b/arch/arm/boot/dts/imx28-m28.dtsi @@ -37,7 +37,7 @@ status = "okay"; rtc: rtc@68 { - compatible = "stm,m41t62"; + compatible = "st,m41t62"; reg = <0x68>; }; }; diff --git a/arch/arm/boot/dts/imx28-tx28.dts b/arch/arm/boot/dts/imx28-tx28.dts index fd20e99c7..0ebbc8385 100644 --- a/arch/arm/boot/dts/imx28-tx28.dts +++ b/arch/arm/boot/dts/imx28-tx28.dts @@ -173,7 +173,7 @@ default-brightness-level = <50>; }; - matrix_keypad: matrix-keypad@0 { + matrix_keypad: matrix-keypad { compatible = "gpio-matrix-keypad"; col-gpios = < &gpio5 0 GPIO_ACTIVE_HIGH diff --git a/arch/arm/boot/dts/imx28.dtsi b/arch/arm/boot/dts/imx28.dtsi index 74aa151cd..0ad893bf5 100644 --- a/arch/arm/boot/dts/imx28.dtsi +++ b/arch/arm/boot/dts/imx28.dtsi @@ -165,6 +165,7 @@ gpio0: gpio@0 { compatible = "fsl,imx28-gpio", "fsl,mxs-gpio"; + reg = <0>; interrupts = <127>; gpio-controller; #gpio-cells = <2>; @@ -174,6 +175,7 @@ gpio1: gpio@1 { compatible = "fsl,imx28-gpio", "fsl,mxs-gpio"; + reg = <1>; interrupts = <126>; gpio-controller; #gpio-cells = <2>; @@ -183,6 +185,7 @@ gpio2: gpio@2 { compatible = "fsl,imx28-gpio", "fsl,mxs-gpio"; + reg = <2>; interrupts = <125>; gpio-controller; #gpio-cells = <2>; @@ -192,6 +195,7 @@ gpio3: gpio@3 { compatible = "fsl,imx28-gpio", "fsl,mxs-gpio"; + reg = <3>; interrupts = <124>; gpio-controller; #gpio-cells = <2>; @@ -201,6 +205,7 @@ gpio4: gpio@4 { compatible = "fsl,imx28-gpio", "fsl,mxs-gpio"; + reg = <4>; interrupts = <123>; gpio-controller; #gpio-cells = <2>; diff --git a/arch/arm/boot/dts/imx31-bug.dts b/arch/arm/boot/dts/imx31-bug.dts index 2424abfc9..ae6cebbed 100644 --- a/arch/arm/boot/dts/imx31-bug.dts +++ b/arch/arm/boot/dts/imx31-bug.dts @@ -22,6 +22,6 @@ }; &uart5 { - fsl,uart-has-rtscts; + uart-has-rtscts; status = "okay"; }; diff --git a/arch/arm/boot/dts/imx35-eukrea-mbimxsd35-baseboard.dts b/arch/arm/boot/dts/imx35-eukrea-mbimxsd35-baseboard.dts index 4727bbb80..e9357131b 100644 --- a/arch/arm/boot/dts/imx35-eukrea-mbimxsd35-baseboard.dts +++ b/arch/arm/boot/dts/imx35-eukrea-mbimxsd35-baseboard.dts @@ -139,14 +139,14 @@ &uart1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart1>; - fsl,uart-has-rtscts; + uart-has-rtscts; status = "okay"; }; &uart2 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart2>; - fsl,uart-has-rtscts; + uart-has-rtscts; status = "okay"; }; diff --git a/arch/arm/boot/dts/imx35-pdk.dts b/arch/arm/boot/dts/imx35-pdk.dts index 8d7155237..9bb628f22 100644 --- a/arch/arm/boot/dts/imx35-pdk.dts +++ b/arch/arm/boot/dts/imx35-pdk.dts @@ -63,6 +63,6 @@ &uart1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart1>; - fsl,uart-has-rtscts; + uart-has-rtscts; status = "okay"; }; diff --git a/arch/arm/boot/dts/imx51-babbage.dts b/arch/arm/boot/dts/imx51-babbage.dts index 018d24eb9..f097b4f29 100644 --- a/arch/arm/boot/dts/imx51-babbage.dts +++ b/arch/arm/boot/dts/imx51-babbage.dts @@ -388,7 +388,7 @@ &uart1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart1>; - fsl,uart-has-rtscts; + uart-has-rtscts; status = "okay"; }; @@ -401,7 +401,7 @@ &uart3 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart3>; - fsl,uart-has-rtscts; + uart-has-rtscts; status = "okay"; }; diff --git a/arch/arm/boot/dts/imx51-eukrea-mbimxsd51-baseboard.dts b/arch/arm/boot/dts/imx51-eukrea-mbimxsd51-baseboard.dts index d270df3e5..728212861 100644 --- a/arch/arm/boot/dts/imx51-eukrea-mbimxsd51-baseboard.dts +++ b/arch/arm/boot/dts/imx51-eukrea-mbimxsd51-baseboard.dts @@ -261,14 +261,14 @@ &uart1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart1>; - fsl,uart-has-rtscts; + uart-has-rtscts; status = "okay"; }; &uart3 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart3 &pinctrl_uart3_rtscts>; - fsl,uart-has-rtscts; + uart-has-rtscts; status = "okay"; }; diff --git a/arch/arm/boot/dts/imx51-ts4800.dts b/arch/arm/boot/dts/imx51-ts4800.dts index 0ff76a1bc..ca1cc5eca 100644 --- a/arch/arm/boot/dts/imx51-ts4800.dts +++ b/arch/arm/boot/dts/imx51-ts4800.dts @@ -102,7 +102,7 @@ status = "okay"; rtc: m41t00@68 { - compatible = "stm,m41t00"; + compatible = "st,m41t00"; reg = <0x68>; }; }; @@ -165,6 +165,27 @@ reg = <0x12000 0x1000>; syscon = <&syscon 0x10 6>; }; + + fpga_irqc: fpga-irqc@15000 { + compatible = "technologic,ts4800-irqc"; + reg = <0x15000 0x1000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_interrupt_fpga>; + interrupt-parent = <&gpio2>; + interrupts= <9 IRQ_TYPE_LEVEL_HIGH>; + interrupt-controller; + #interrupt-cells = <1>; + }; + + can@1a000 { + compatible = "technologic,sja1000"; + reg = <0x1a000 0x100>; + interrupt-parent = <&fpga_irqc>; + interrupts = <1>; + reg-io-width = <2>; + nxp,tx-output-config = <0x06>; + nxp,external-clock-frequency = <24000000>; + }; }; }; @@ -228,6 +249,12 @@ >; }; + pinctrl_interrupt_fpga: fpgaicgrp { + fsl,pins = < + MX51_PAD_EIM_D27__GPIO2_9 0xe5 + >; + }; + pinctrl_lcd: lcdgrp { fsl,pins = < MX51_PAD_DISP1_DAT0__DISP1_DAT0 0x5 diff --git a/arch/arm/boot/dts/imx53-m53.dtsi b/arch/arm/boot/dts/imx53-m53.dtsi index 87a7fc709..d259f57bf 100644 --- a/arch/arm/boot/dts/imx53-m53.dtsi +++ b/arch/arm/boot/dts/imx53-m53.dtsi @@ -84,7 +84,7 @@ }; rtc: rtc@68 { - compatible = "stm,m41t62"; + compatible = "st,m41t62"; reg = <0x68>; }; }; diff --git a/arch/arm/boot/dts/imx53-smd.dts b/arch/arm/boot/dts/imx53-smd.dts index 542ab9e69..9f5190040 100644 --- a/arch/arm/boot/dts/imx53-smd.dts +++ b/arch/arm/boot/dts/imx53-smd.dts @@ -56,7 +56,7 @@ &uart3 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart3>; - fsl,uart-has-rtscts; + uart-has-rtscts; status = "okay"; }; diff --git a/arch/arm/boot/dts/imx53-tqma53.dtsi b/arch/arm/boot/dts/imx53-tqma53.dtsi index e03373a58..91a6a9ff5 100644 --- a/arch/arm/boot/dts/imx53-tqma53.dtsi +++ b/arch/arm/boot/dts/imx53-tqma53.dtsi @@ -218,7 +218,7 @@ &uart1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart1>; - fsl,uart-has-rtscts; + uart-has-rtscts; status = "disabled"; }; diff --git a/arch/arm/boot/dts/imx53-tx53.dtsi b/arch/arm/boot/dts/imx53-tx53.dtsi index 6685af74a..b4a310de5 100644 --- a/arch/arm/boot/dts/imx53-tx53.dtsi +++ b/arch/arm/boot/dts/imx53-tx53.dtsi @@ -513,21 +513,21 @@ &uart1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart1>; - fsl,uart-has-rtscts; + uart-has-rtscts; status = "okay"; }; &uart2 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart2>; - fsl,uart-has-rtscts; + uart-has-rtscts; status = "okay"; }; &uart3 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart3>; - fsl,uart-has-rtscts; + uart-has-rtscts; status = "okay"; }; diff --git a/arch/arm/boot/dts/imx6dl-riotboard.dts b/arch/arm/boot/dts/imx6dl-riotboard.dts index bfbed52ce..2becd7cd6 100644 --- a/arch/arm/boot/dts/imx6dl-riotboard.dts +++ b/arch/arm/boot/dts/imx6dl-riotboard.dts @@ -97,6 +97,7 @@ phy-reset-gpios = <&gpio3 31 0>; interrupts-extended = <&gpio1 6 IRQ_TYPE_LEVEL_HIGH>, <&intc 0 119 IRQ_TYPE_LEVEL_HIGH>; + fsl,err006687-workaround-present; status = "okay"; }; diff --git a/arch/arm/boot/dts/imx6q-apalis-ixora.dts b/arch/arm/boot/dts/imx6q-apalis-ixora.dts index 8e67ca27a..207b85b91 100644 --- a/arch/arm/boot/dts/imx6q-apalis-ixora.dts +++ b/arch/arm/boot/dts/imx6q-apalis-ixora.dts @@ -93,7 +93,7 @@ reg = <0>; lcd_display_in: endpoint { - remote-endpoint = <&ipu1_di0_disp1>; + remote-endpoint = <&ipu1_di1_disp1>; }; }; @@ -210,7 +210,7 @@ }; }; -&ipu1_di0_disp1 { +&ipu1_di1_disp1 { remote-endpoint = <&lcd_display_in>; }; diff --git a/arch/arm/boot/dts/imx6q-arm2.dts b/arch/arm/boot/dts/imx6q-arm2.dts index d6515f7a5..d8acf1561 100644 --- a/arch/arm/boot/dts/imx6q-arm2.dts +++ b/arch/arm/boot/dts/imx6q-arm2.dts @@ -185,6 +185,7 @@ phy-mode = "rgmii"; interrupts-extended = <&gpio1 6 IRQ_TYPE_LEVEL_HIGH>, <&intc 0 119 IRQ_TYPE_LEVEL_HIGH>; + fsl,err006687-workaround-present; status = "okay"; }; @@ -218,7 +219,7 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart2>; fsl,dte-mode; - fsl,uart-has-rtscts; + uart-has-rtscts; status = "okay"; }; diff --git a/arch/arm/boot/dts/imx6q-ba16.dtsi b/arch/arm/boot/dts/imx6q-ba16.dtsi index f7e17e200..f2adc6072 100644 --- a/arch/arm/boot/dts/imx6q-ba16.dtsi +++ b/arch/arm/boot/dts/imx6q-ba16.dtsi @@ -351,7 +351,7 @@ &uart3 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart3>; - fsl,uart-has-rtscts; + uart-has-rtscts; status = "okay"; }; diff --git a/arch/arm/boot/dts/imx6q-bx50v3.dtsi b/arch/arm/boot/dts/imx6q-bx50v3.dtsi index bb66dfd52..cf3fd31e3 100644 --- a/arch/arm/boot/dts/imx6q-bx50v3.dtsi +++ b/arch/arm/boot/dts/imx6q-bx50v3.dtsi @@ -52,6 +52,12 @@ }; }; + gpio-poweroff { + compatible = "gpio-poweroff"; + gpios = <&gpio4 11 GPIO_ACTIVE_LOW>; + status = "okay"; + }; + reg_wl18xx_vmmc: regulator-wl18xx { compatible = "regulator-fixed"; regulator-name = "vwl1807"; diff --git a/arch/arm/boot/dts/imx6q-cm-fx6.dts b/arch/arm/boot/dts/imx6q-cm-fx6.dts index 99b46f803..b5de7e620 100644 --- a/arch/arm/boot/dts/imx6q-cm-fx6.dts +++ b/arch/arm/boot/dts/imx6q-cm-fx6.dts @@ -3,15 +3,46 @@ * * Author: Valentin Raevsky <valentin@compulab.co.il> * - * The code contained herein is licensed under the GNU General Public - * License. You may obtain a copy of the GNU General Public License - * Version 2 or later at the following locations: + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. * - * http://www.opensource.org/licenses/gpl-license.html - * http://www.gnu.org/copyleft/gpl.html + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This file is distributed in the hope that it will be useful + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; +#include <dt-bindings/gpio/gpio.h> #include "imx6q.dtsi" / { @@ -31,6 +62,71 @@ linux,default-trigger = "heartbeat"; }; }; + + reg_pcie_power_on_gpio: regulator-pcie-power-on-gpio { + compatible = "regulator-fixed"; + regulator-name = "regulator-pcie-power-on-gpio"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio2 24 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + reg_usb_h1_vbus: usb_h1_vbus { + compatible = "regulator-fixed"; + regulator-name = "usb_h1_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio7 8 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + reg_usb_otg_vbus: usb_otg_vbus { + compatible = "regulator-fixed"; + regulator-name = "usb_otg_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; +}; + +&cpu0 { + /* + * Although the imx6q fuse indicates that 1.2GHz operation is possible, + * the module behaves unstable at this frequency. Hence, remove the + * 1.2GHz operation point here. + */ + operating-points = < + /* kHz uV */ + 996000 1250000 + 852000 1250000 + 792000 1175000 + 396000 975000 + >; + fsl,soc-operating-points = < + /* ARM kHz SOC-PU uV */ + 996000 1250000 + 852000 1250000 + 792000 1175000 + 396000 1175000 + >; +}; + +&ecspi1 { + fsl,spi-num-chipselects = <2>; + cs-gpios = <&gpio2 30 GPIO_ACTIVE_HIGH>, <&gpio3 19 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ecspi1>; + status = "okay"; + + m25p80@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "st,m25p", "jedec,spi-nor"; + spi-max-frequency = <20000000>; + reg = <0>; + }; }; &fec { @@ -46,58 +142,122 @@ status = "okay"; }; +&i2c3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c3>; + status = "okay"; + clock-frequency = <100000>; + + eeprom@50 { + compatible = "at24,24c02"; + reg = <0x50>; + pagesize = <16>; + }; +}; + &iomuxc { - imx6q-cm-fx6 { - pinctrl_enet: enetgrp { - fsl,pins = < - MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b0b0 - MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x1b0b0 - MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x1b0b0 - MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b0b0 - MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b0b0 - MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b0b0 - MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x1b0b0 - MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x1b0b0 - MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x1b0b0 - MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x1b0b0 - MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x1b0b0 - MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b0b0 - MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x1b0b0 - MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0 - MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0 - MX6QDL_PAD_GPIO_16__ENET_REF_CLK 0x4001b0a8 - >; - }; + pinctrl_ecspi1: ecspi1grp { + fsl,pins = < + MX6QDL_PAD_EIM_D16__ECSPI1_SCLK 0x100b1 + MX6QDL_PAD_EIM_D17__ECSPI1_MISO 0x100b1 + MX6QDL_PAD_EIM_D18__ECSPI1_MOSI 0x100b1 + MX6QDL_PAD_EIM_EB2__GPIO2_IO30 0x100b1 + MX6QDL_PAD_EIM_D19__GPIO3_IO19 0x100b1 + >; + }; - pinctrl_gpmi_nand: gpminandgrp { - fsl,pins = < - MX6QDL_PAD_NANDF_CLE__NAND_CLE 0xb0b1 - MX6QDL_PAD_NANDF_ALE__NAND_ALE 0xb0b1 - MX6QDL_PAD_NANDF_WP_B__NAND_WP_B 0xb0b1 - MX6QDL_PAD_NANDF_RB0__NAND_READY_B 0xb000 - MX6QDL_PAD_NANDF_CS0__NAND_CE0_B 0xb0b1 - MX6QDL_PAD_NANDF_CS1__NAND_CE1_B 0xb0b1 - MX6QDL_PAD_SD4_CMD__NAND_RE_B 0xb0b1 - MX6QDL_PAD_SD4_CLK__NAND_WE_B 0xb0b1 - MX6QDL_PAD_NANDF_D0__NAND_DATA00 0xb0b1 - MX6QDL_PAD_NANDF_D1__NAND_DATA01 0xb0b1 - MX6QDL_PAD_NANDF_D2__NAND_DATA02 0xb0b1 - MX6QDL_PAD_NANDF_D3__NAND_DATA03 0xb0b1 - MX6QDL_PAD_NANDF_D4__NAND_DATA04 0xb0b1 - MX6QDL_PAD_NANDF_D5__NAND_DATA05 0xb0b1 - MX6QDL_PAD_NANDF_D6__NAND_DATA06 0xb0b1 - MX6QDL_PAD_NANDF_D7__NAND_DATA07 0xb0b1 - MX6QDL_PAD_SD4_DAT0__NAND_DQS 0x00b1 - >; - }; + pinctrl_enet: enetgrp { + fsl,pins = < + MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b0b0 + MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x1b0b0 + MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x1b0b0 + MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b0b0 + MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b0b0 + MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b0b0 + MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x1b0b0 + MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x1b0b0 + MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x1b0b0 + MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x1b0b0 + MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x1b0b0 + MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b0b0 + MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x1b0b0 + MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0 + MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0 + MX6QDL_PAD_GPIO_16__ENET_REF_CLK 0x4001b0a8 + >; + }; - pinctrl_uart4: uart4grp { - fsl,pins = < - MX6QDL_PAD_KEY_COL0__UART4_TX_DATA 0x1b0b1 - MX6QDL_PAD_KEY_ROW0__UART4_RX_DATA 0x1b0b1 - >; - }; + pinctrl_gpmi_nand: gpminandgrp { + fsl,pins = < + MX6QDL_PAD_NANDF_CLE__NAND_CLE 0xb0b1 + MX6QDL_PAD_NANDF_ALE__NAND_ALE 0xb0b1 + MX6QDL_PAD_NANDF_WP_B__NAND_WP_B 0xb0b1 + MX6QDL_PAD_NANDF_RB0__NAND_READY_B 0xb000 + MX6QDL_PAD_NANDF_CS0__NAND_CE0_B 0xb0b1 + MX6QDL_PAD_NANDF_CS1__NAND_CE1_B 0xb0b1 + MX6QDL_PAD_SD4_CMD__NAND_RE_B 0xb0b1 + MX6QDL_PAD_SD4_CLK__NAND_WE_B 0xb0b1 + MX6QDL_PAD_NANDF_D0__NAND_DATA00 0xb0b1 + MX6QDL_PAD_NANDF_D1__NAND_DATA01 0xb0b1 + MX6QDL_PAD_NANDF_D2__NAND_DATA02 0xb0b1 + MX6QDL_PAD_NANDF_D3__NAND_DATA03 0xb0b1 + MX6QDL_PAD_NANDF_D4__NAND_DATA04 0xb0b1 + MX6QDL_PAD_NANDF_D5__NAND_DATA05 0xb0b1 + MX6QDL_PAD_NANDF_D6__NAND_DATA06 0xb0b1 + MX6QDL_PAD_NANDF_D7__NAND_DATA07 0xb0b1 + MX6QDL_PAD_SD4_DAT0__NAND_DQS 0x00b1 + >; + }; + + pinctrl_i2c3: i2c3grp { + fsl,pins = < + MX6QDL_PAD_GPIO_3__I2C3_SCL 0x4001b8b1 + MX6QDL_PAD_GPIO_6__I2C3_SDA 0x4001b8b1 + >; + }; + + pinctrl_pcie: pciegrp { + fsl,pins = < + MX6QDL_PAD_ENET_RXD1__GPIO1_IO26 0x1b0b1 + MX6QDL_PAD_EIM_CS1__GPIO2_IO24 0x1b0b1 + >; + }; + + pinctrl_uart4: uart4grp { + fsl,pins = < + MX6QDL_PAD_KEY_COL0__UART4_TX_DATA 0x1b0b1 + MX6QDL_PAD_KEY_ROW0__UART4_RX_DATA 0x1b0b1 + >; }; + + pinctrl_usbh1: usbh1grp { + fsl,pins = < + MX6QDL_PAD_SD3_RST__GPIO7_IO08 0x1b0b1 + >; + }; + + pinctrl_usbotg: usbotggrp { + fsl,pins = < + MX6QDL_PAD_ENET_RX_ER__USB_OTG_ID 0x17059 + MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x130b0 + >; + }; +}; + +&pcie { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pcie>; + reset-gpio = <&gpio1 26 GPIO_ACTIVE_LOW>; + vdd-supply = <®_pcie_power_on_gpio>; + status = "okay"; +}; + +&sata { + status = "okay"; +}; + +&snvs_poweroff { + status = "okay"; }; &uart4 { @@ -105,3 +265,18 @@ pinctrl-0 = <&pinctrl_uart4>; status = "okay"; }; + +&usbh1 { + vbus-supply = <®_usb_h1_vbus>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbh1>; + status = "okay"; +}; + +&usbotg { + vbus-supply = <®_usb_otg_vbus>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbotg>; + dr_mode = "otg"; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/imx6q-dmo-edmqmx6.dts b/arch/arm/boot/dts/imx6q-dmo-edmqmx6.dts index 364578d70..905907325 100644 --- a/arch/arm/boot/dts/imx6q-dmo-edmqmx6.dts +++ b/arch/arm/boot/dts/imx6q-dmo-edmqmx6.dts @@ -282,7 +282,7 @@ }; rtc: m41t62@68 { - compatible = "stm,m41t62"; + compatible = "st,m41t62"; reg = <0x68>; }; }; diff --git a/arch/arm/boot/dts/imx6q-h100.dts b/arch/arm/boot/dts/imx6q-h100.dts new file mode 100644 index 000000000..65e66f994 --- /dev/null +++ b/arch/arm/boot/dts/imx6q-h100.dts @@ -0,0 +1,395 @@ +/* + * Copyright (C) 2015 Lucas Stach <kernel@pengutronix.de> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This file is distributed in the hope that it will be useful + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; + +#include "imx6q.dtsi" +#include "imx6qdl-microsom.dtsi" +#include "imx6qdl-microsom-ar8035.dtsi" + +/ { + model = "Auvidea H100"; + compatible = "auvidea,h100", "fsl,imx6q"; + + aliases { + rtc0 = &rtc; + rtc1 = &snvs_rtc; + }; + + chosen { + stdout-path = &uart2; + }; + + hdmi_osc: hdmi-osc { + compatible = "fixed-clock"; + clock-output-names = "hdmi-osc"; + clock-frequency = <27000000>; + #clock-cells = <0>; + }; + + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_h100_leds>; + + led0: power { + label = "power"; + gpios = <&gpio3 0 GPIO_ACTIVE_LOW>; + default-state = "on"; + }; + + led1: stream { + label = "stream"; + gpios = <&gpio2 29 GPIO_ACTIVE_LOW>; + default-state = "off"; + }; + + led2: rec { + label = "rec"; + gpios = <&gpio2 28 GPIO_ACTIVE_LOW>; + default-state = "off"; + }; + }; + + reg_3p3v: regulator-3p3v { + compatible = "regulator-fixed"; + regulator-name = "3P3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + reg_hdmi: regulator-hdmi { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_h100_reg_hdmi>; + compatible = "regulator-fixed"; + enable-active-high; + gpio = <&gpio2 20 GPIO_ACTIVE_HIGH>; + regulator-name = "V_HDMI"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + }; + + reg_nvcc_sd2: regulator-nvcc-sd2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_h100_reg_nvcc_sd2>; + compatible = "regulator-gpio"; + regulator-name = "NVCC_SD2"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-type = "voltage"; + regulator-boot-on; + regulator-always-on; + gpios = <&gpio4 9 GPIO_ACTIVE_HIGH>; + states = <1800000 0x1 + 3300000 0x0>; + }; + + reg_usbh1_vbus: regulator-usb-h1-vbus { + compatible = "regulator-fixed"; + enable-active-high; + gpio = <&gpio1 0 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_h100_usbh1_vbus>; + regulator-name = "USB_H1_VBUS"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + }; + + reg_usbotg_vbus: regulator-usb-otg-vbus { + compatible = "regulator-fixed"; + enable-active-high; + gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_h100_usbotg_vbus>; + regulator-name = "USB_OTG_VBUS"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + }; + + sound-sgtl5000 { + compatible = "fsl,imx-audio-sgtl5000"; + model = "H100 on-board codec"; + audio-codec = <&sgtl5000>; + audio-routing = + "MIC_IN", "Mic Jack", + "Mic Jack", "Mic Bias", + "Headphone Jack", "HP_OUT"; + mux-ext-port = <5>; + mux-int-port = <1>; + ssi-controller = <&ssi1>; + }; +}; + +&audmux { + status = "okay"; +}; + +&hdmi { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_h100_hdmi>; + ddc-i2c-bus = <&i2c2>; + status = "okay"; +}; + +&i2c1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_h100_i2c1>; + status = "okay"; + + eeprom: 24c02@51 { + compatible = "microchip,24c02", "at24"; + reg = <0x51>; + }; + + rtc: pcf8523@68 { + compatible = "nxp,pcf8523"; + reg = <0x68>; + }; + + sgtl5000: sgtl5000@0a { + compatible = "fsl,sgtl5000"; + reg = <0x0a>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_h100_sgtl5000>; + clocks = <&clks IMX6QDL_CLK_CKO>; + VDDA-supply = <®_3p3v>; + VDDIO-supply = <®_3p3v>; + }; + + tc358743: tc358743@0f { + compatible = "toshiba,tc358743"; + reg = <0x0f>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_h100_tc358743>; + clocks = <&hdmi_osc>; + clock-names = "refclk"; + reset-gpios = <&gpio6 15 GPIO_ACTIVE_LOW>; + /* IRQ has a wrong pull resistor which renders it useless */ + + port@0 { + tc358743_out: endpoint { + remote-endpoint = <&mipi_csi2_in>; + data-lanes = <1 2 3 4>; + clock-lanes = <0>; + clock-noncontinuous; + link-frequencies = /bits/ 64 <297000000>; + }; + }; + }; +}; + +&i2c2 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_h100_i2c2>; + status = "okay"; +}; + +&iomuxc { + h100 { + pinctrl_h100_hdmi: h100-hdmi { + fsl,pins = < + MX6QDL_PAD_KEY_ROW2__HDMI_TX_CEC_LINE 0x1f8b0 + >; + }; + + pinctrl_h100_i2c1: h100-i2c1 { + fsl,pins = < + MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1 + MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1 + >; + }; + + pinctrl_h100_i2c2: h100-i2c2 { + fsl,pins = < + MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1 + MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1 + >; + }; + + pinctrl_h100_leds: pinctrl-h100-leds { + fsl,pins = < + MX6QDL_PAD_EIM_DA0__GPIO3_IO00 0x1b0b0 + MX6QDL_PAD_EIM_EB1__GPIO2_IO29 0x1b0b0 + MX6QDL_PAD_EIM_EB0__GPIO2_IO28 0x1b0b0 + >; + }; + + pinctrl_h100_reg_hdmi: h100-reg-hdmi { + fsl,pins = < + MX6QDL_PAD_EIM_A18__GPIO2_IO20 0x1b0b0 + >; + }; + + pinctrl_h100_reg_nvcc_sd2: h100-reg-nvcc-sd2 { + fsl,pins = < + MX6QDL_PAD_KEY_ROW1__GPIO4_IO09 0x1b0b0 + >; + }; + + pinctrl_h100_sgtl5000: h100-sgtl5000 { + fsl,pins = < + MX6QDL_PAD_DISP0_DAT19__AUD5_RXD 0x130b0 + MX6QDL_PAD_KEY_COL0__AUD5_TXC 0x130b0 + MX6QDL_PAD_KEY_ROW0__AUD5_TXD 0x110b0 + MX6QDL_PAD_KEY_COL1__AUD5_TXFS 0x130b0 + MX6QDL_PAD_GPIO_5__CCM_CLKO1 0x130b0 + >; + }; + + pinctrl_h100_tc358743: h100-tc358743 { + fsl,pins = < + MX6QDL_PAD_NANDF_CS2__GPIO6_IO15 0x1b0b0 + >; + }; + + pinctrl_h100_uart2: h100-uart2 { + fsl,pins = < + MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA 0x1b0b1 + MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA 0x1b0b1 + >; + }; + + pinctrl_h100_usbh1_vbus: hummingboard-usbh1-vbus { + fsl,pins = < + MX6QDL_PAD_GPIO_0__GPIO1_IO00 0x1b0b0 + >; + }; + + pinctrl_h100_usbotg_id: hummingboard-usbotg-id { + fsl,pins = < + MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x13059 + >; + }; + + pinctrl_h100_usbotg_vbus: hummingboard-usbotg-vbus { + fsl,pins = < + MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x1b0b0 + >; + }; + + pinctrl_h100_usdhc2: h100-usdhc2 { + fsl,pins = < + MX6QDL_PAD_GPIO_4__GPIO1_IO04 0x1f071 + MX6QDL_PAD_SD2_CMD__SD2_CMD 0x17059 + MX6QDL_PAD_SD2_CLK__SD2_CLK 0x10059 + MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x17059 + MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x17059 + MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x17059 + MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x13059 + >; + }; + + pinctrl_h100_usdhc2_100mhz: h100-usdhc2-100mhz { + fsl,pins = < + MX6QDL_PAD_GPIO_4__GPIO1_IO04 0x1f071 + MX6QDL_PAD_SD2_CMD__SD2_CMD 0x170b9 + MX6QDL_PAD_SD2_CLK__SD2_CLK 0x100b9 + MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x170b9 + MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x170b9 + MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x170b9 + MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x170b9 + >; + }; + + pinctrl_h100_usdhc2_200mhz: h100-usdhc2-200mhz { + fsl,pins = < + MX6QDL_PAD_GPIO_4__GPIO1_IO04 0x1f071 + MX6QDL_PAD_SD2_CMD__SD2_CMD 0x170f9 + MX6QDL_PAD_SD2_CLK__SD2_CLK 0x100f9 + MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x170f9 + MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x170f9 + MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x170f9 + MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x170f9 + >; + }; + }; +}; + +&mipi_csi { + status = "okay"; + + port@0 { + mipi_csi2_in: endpoint { + remote-endpoint = <&tc358743_out>; + data-lanes = <1 2 3 4>; + clock-lanes = <0>; + clock-noncontinuous; + link-frequencies = /bits/ 64 <297000000>; + }; + }; +}; + +&ssi1 { + status = "okay"; +}; + +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_h100_uart2>; + status = "okay"; +}; + +&usbh1 { + disable-over-current; + vbus-supply = <®_usbh1_vbus>; + status = "okay"; +}; + +&usbotg { + disable-over-current; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_h100_usbotg_id>; + vbus-supply = <®_usbotg_vbus>; + status = "okay"; +}; + +&usdhc2 { + pinctrl-names = "default", "state_100mhz", "state_200mhz"; + pinctrl-0 = <&pinctrl_h100_usdhc2>; + pinctrl-1 = <&pinctrl_h100_usdhc2_100mhz>; + pinctrl-2 = <&pinctrl_h100_usdhc2_200mhz>; + vmmc-supply = <®_3p3v>; + vqmmc-supply = <®_nvcc_sd2>; + cd-gpios = <&gpio1 4 GPIO_ACTIVE_LOW>; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/imx6q-tbs2910.dts b/arch/arm/boot/dts/imx6q-tbs2910.dts index 1926b1348..d7c8ccb2d 100644 --- a/arch/arm/boot/dts/imx6q-tbs2910.dts +++ b/arch/arm/boot/dts/imx6q-tbs2910.dts @@ -191,7 +191,7 @@ &pcie { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_pcie>; - reset-gpio = <&gpio7 12 GPIO_ACTIVE_HIGH>; + reset-gpio = <&gpio7 12 GPIO_ACTIVE_LOW>; status = "okay"; }; diff --git a/arch/arm/boot/dts/imx6q-utilite-pro.dts b/arch/arm/boot/dts/imx6q-utilite-pro.dts new file mode 100644 index 000000000..61990630a --- /dev/null +++ b/arch/arm/boot/dts/imx6q-utilite-pro.dts @@ -0,0 +1,197 @@ +/* + * Copyright 2013 CompuLab Ltd. + * Copyright 2016 Christopher Spinrath + * + * Based on the devicetree distributed with the vendor kernel for the + * Utilite Pro: + * Copyright 2013 CompuLab Ltd. + * Author: Valentin Raevsky <valentin@compulab.co.il> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +#include <dt-bindings/input/input.h> +#include "imx6q-cm-fx6.dts" + +/ { + model = "CompuLab Utilite Pro"; + compatible = "compulab,utilite-pro", "compulab,cm-fx6", "fsl,imx6q"; + + aliases { + ethernet1 = ð1; + rtc0 = &em3027; + rtc1 = &snvs_rtc; + }; + + gpio-keys { + compatible = "gpio-keys"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpio_keys>; + + power { + label = "Power Button"; + gpios = <&gpio1 29 GPIO_ACTIVE_LOW>; + linux,code = <KEY_POWER>; + gpio-key,wakeup; + }; + }; +}; + +&hdmi { + ddc-i2c-bus = <&i2c2>; + status = "okay"; +}; + +&i2c1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c1>; + status = "okay"; + + eeprom@50 { + compatible = "at24,24c02"; + reg = <0x50>; + pagesize = <16>; + }; + + em3027: rtc@56 { + compatible = "emmicro,em3027"; + reg = <0x56>; + }; +}; + +&i2c2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c2>; + status = "okay"; +}; + +&iomuxc { + pinctrl_gpio_keys: gpio_keysgrp { + fsl,pins = < + MX6QDL_PAD_ENET_TXD1__GPIO1_IO29 0x1b0b0 + >; + }; + + pinctrl_i2c1: i2c1grp { + fsl,pins = < + MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1 + MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1 + >; + }; + + pinctrl_i2c2: i2c2grp { + fsl,pins = < + MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1 + MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1 + >; + }; + + pinctrl_uart2: uart2grp { + fsl,pins = < + MX6QDL_PAD_GPIO_7__UART2_TX_DATA 0x1b0b1 + MX6QDL_PAD_GPIO_8__UART2_RX_DATA 0x1b0b1 + MX6QDL_PAD_SD4_DAT5__UART2_RTS_B 0x1b0b1 + MX6QDL_PAD_SD4_DAT6__UART2_CTS_B 0x1b0b1 + >; + }; + + pinctrl_usdhc3: usdhc3grp { + fsl,pins = < + MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17059 + MX6QDL_PAD_SD3_CLK__SD3_CLK 0x10059 + MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17059 + MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059 + MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059 + MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059 + >; + }; + + pinctrl_usdhc3_100mhz: usdhc3grp-100mhz { + fsl,pins = < + MX6QDL_PAD_SD3_CMD__SD3_CMD 0x170B9 + MX6QDL_PAD_SD3_CLK__SD3_CLK 0x100B9 + MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x170B9 + MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x170B9 + MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x170B9 + MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x170B9 + >; + }; + + pinctrl_usdhc3_200mhz: usdhc3grp-200mhz { + fsl,pins = < + MX6QDL_PAD_SD3_CMD__SD3_CMD 0x170F9 + MX6QDL_PAD_SD3_CLK__SD3_CLK 0x100F9 + MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x170F9 + MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x170F9 + MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x170F9 + MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x170F9 + >; + }; +}; + +&pcie { + pcie@0,0 { + reg = <0x000000 0 0 0 0>; + #address-cells = <3>; + #size-cells = <2>; + + /* non-removable i211 ethernet card */ + eth1: intel,i211@pcie0,0 { + reg = <0x010000 0 0 0 0>; + }; + }; +}; + +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart2>; + uart-has-rtscts; + status = "okay"; +}; + +&usdhc3 { + pinctrl-names = "default", "state_100mhz", "state_200mhz"; + pinctrl-0 = <&pinctrl_usdhc3>; + pinctrl-1 = <&pinctrl_usdhc3_100mhz>; + pinctrl-2 = <&pinctrl_usdhc3_200mhz>; + no-1-8-v; + broken-cd; + keep-power-in-suspend; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/imx6qdl-apalis.dtsi b/arch/arm/boot/dts/imx6qdl-apalis.dtsi index 922b1dd06..315e033ff 100644 --- a/arch/arm/boot/dts/imx6qdl-apalis.dtsi +++ b/arch/arm/boot/dts/imx6qdl-apalis.dtsi @@ -423,7 +423,7 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart1_dte &pinctrl_uart1_ctrl>; fsl,dte-mode; - fsl,uart-has-rtscts; + uart-has-rtscts; status = "disabled"; }; @@ -431,7 +431,7 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart2_dte>; fsl,dte-mode; - fsl,uart-has-rtscts; + uart-has-rtscts; status = "disabled"; }; diff --git a/arch/arm/boot/dts/imx6qdl-apf6dev.dtsi b/arch/arm/boot/dts/imx6qdl-apf6dev.dtsi index 865c9a264..edbce222c 100644 --- a/arch/arm/boot/dts/imx6qdl-apf6dev.dtsi +++ b/arch/arm/boot/dts/imx6qdl-apf6dev.dtsi @@ -254,7 +254,7 @@ &uart3 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart3 &pinctrl_gsm>; - fsl,uart-has-rtscts; + uart-has-rtscts; status = "okay"; }; diff --git a/arch/arm/boot/dts/imx6qdl-aristainetos.dtsi b/arch/arm/boot/dts/imx6qdl-aristainetos.dtsi index ecbc6eba6..54f4f0193 100644 --- a/arch/arm/boot/dts/imx6qdl-aristainetos.dtsi +++ b/arch/arm/boot/dts/imx6qdl-aristainetos.dtsi @@ -143,14 +143,14 @@ &uart4 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart4>; - fsl,uart-has-rtscts; + uart-has-rtscts; status = "okay"; }; &uart5 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart5>; - fsl,uart-has-rtscts; + uart-has-rtscts; status = "okay"; }; diff --git a/arch/arm/boot/dts/imx6qdl-aristainetos2.dtsi b/arch/arm/boot/dts/imx6qdl-aristainetos2.dtsi index 7d81100e7..7fff02c40 100644 --- a/arch/arm/boot/dts/imx6qdl-aristainetos2.dtsi +++ b/arch/arm/boot/dts/imx6qdl-aristainetos2.dtsi @@ -351,7 +351,7 @@ &uart1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart1>; - fsl,uart-has-rtscts; + uart-has-rtscts; status = "okay"; }; @@ -364,7 +364,7 @@ &uart3 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart3>; - fsl,uart-has-rtscts; + uart-has-rtscts; status = "okay"; }; diff --git a/arch/arm/boot/dts/imx6qdl-microsom.dtsi b/arch/arm/boot/dts/imx6qdl-microsom.dtsi index 86460e46d..3d62401db 100644 --- a/arch/arm/boot/dts/imx6qdl-microsom.dtsi +++ b/arch/arm/boot/dts/imx6qdl-microsom.dtsi @@ -143,7 +143,7 @@ &uart4 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_microsom_brcm_bt &pinctrl_microsom_uart4>; - fsl,uart-has-rtscts; + uart-has-rtscts; status = "okay"; }; diff --git a/arch/arm/boot/dts/imx6qdl-nit6xlite.dtsi b/arch/arm/boot/dts/imx6qdl-nit6xlite.dtsi index e456b5cc1..cfd50ea1e 100644 --- a/arch/arm/boot/dts/imx6qdl-nit6xlite.dtsi +++ b/arch/arm/boot/dts/imx6qdl-nit6xlite.dtsi @@ -250,6 +250,7 @@ txd3-skew-ps = <0>; interrupts-extended = <&gpio1 6 IRQ_TYPE_LEVEL_HIGH>, <&intc 0 119 IRQ_TYPE_LEVEL_HIGH>; + fsl,err006687-workaround-present; status = "okay"; }; @@ -591,7 +592,7 @@ &uart3 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart3>; - fsl,uart-has-rtscts; + uart-has-rtscts; status = "okay"; }; diff --git a/arch/arm/boot/dts/imx6qdl-nitrogen6_max.dtsi b/arch/arm/boot/dts/imx6qdl-nitrogen6_max.dtsi index 657da6b6c..9677bf323 100644 --- a/arch/arm/boot/dts/imx6qdl-nitrogen6_max.dtsi +++ b/arch/arm/boot/dts/imx6qdl-nitrogen6_max.dtsi @@ -385,6 +385,7 @@ txd3-skew-ps = <0>; interrupts-extended = <&gpio1 6 IRQ_TYPE_LEVEL_HIGH>, <&intc 0 119 IRQ_TYPE_LEVEL_HIGH>; + fsl,err006687-workaround-present; status = "okay"; }; diff --git a/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi b/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi index 73915db70..97d9c3339 100644 --- a/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi +++ b/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi @@ -287,6 +287,7 @@ txd3-skew-ps = <0>; interrupts-extended = <&gpio1 6 IRQ_TYPE_LEVEL_HIGH>, <&intc 0 119 IRQ_TYPE_LEVEL_HIGH>; + fsl,err006687-workaround-present; status = "okay"; }; diff --git a/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi b/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi index d354d4069..6aa193fb2 100644 --- a/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi +++ b/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi @@ -155,6 +155,7 @@ phy-mode = "rgmii"; interrupts-extended = <&gpio1 6 IRQ_TYPE_LEVEL_HIGH>, <&intc 0 119 IRQ_TYPE_LEVEL_HIGH>; + fsl,err006687-workaround-present; status = "okay"; }; diff --git a/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi b/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi index c47fe6c79..f65fdfc25 100644 --- a/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi +++ b/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi @@ -273,6 +273,7 @@ txd3-skew-ps = <0>; interrupts-extended = <&gpio1 6 IRQ_TYPE_LEVEL_HIGH>, <&intc 0 119 IRQ_TYPE_LEVEL_HIGH>; + fsl,err006687-workaround-present; status = "okay"; }; diff --git a/arch/arm/boot/dts/imx6qdl-sabresd.dtsi b/arch/arm/boot/dts/imx6qdl-sabresd.dtsi index 5248e7bd2..d77ea9423 100644 --- a/arch/arm/boot/dts/imx6qdl-sabresd.dtsi +++ b/arch/arm/boot/dts/imx6qdl-sabresd.dtsi @@ -501,6 +501,12 @@ MX6QDL_PAD_SD4_DAT7__SD4_DATA7 0x17059 >; }; + + pinctrl_wdog: wdoggrp { + fsl,pins = < + MX6QDL_PAD_GPIO_1__WDOG2_B 0x1b0b0 + >; + }; }; gpio_leds { @@ -533,7 +539,7 @@ &pcie { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_pcie>; - reset-gpio = <&gpio7 12 0>; + reset-gpio = <&gpio7 12 GPIO_ACTIVE_LOW>; status = "okay"; }; @@ -596,3 +602,14 @@ no-1-8-v; status = "okay"; }; + +&wdog1 { + status = "disabled"; +}; + +&wdog2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_wdog>; + fsl,ext-reset-output; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/imx6qdl-tx6.dtsi b/arch/arm/boot/dts/imx6qdl-tx6.dtsi index 39b85aef9..ac9529f85 100644 --- a/arch/arm/boot/dts/imx6qdl-tx6.dtsi +++ b/arch/arm/boot/dts/imx6qdl-tx6.dtsi @@ -689,21 +689,21 @@ &uart1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart1 &pinctrl_uart1_rtscts>; - fsl,uart-has-rtscts; + uart-has-rtscts; status = "okay"; }; &uart2 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart2 &pinctrl_uart2_rtscts>; - fsl,uart-has-rtscts; + uart-has-rtscts; status = "okay"; }; &uart3 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart3 &pinctrl_uart3_rtscts>; - fsl,uart-has-rtscts; + uart-has-rtscts; status = "okay"; }; diff --git a/arch/arm/boot/dts/imx6qdl-wandboard.dtsi b/arch/arm/boot/dts/imx6qdl-wandboard.dtsi index 8e7c40e11..3ffe00c55 100644 --- a/arch/arm/boot/dts/imx6qdl-wandboard.dtsi +++ b/arch/arm/boot/dts/imx6qdl-wandboard.dtsi @@ -211,6 +211,7 @@ phy-reset-gpios = <&gpio3 29 0>; interrupts-extended = <&gpio1 6 IRQ_TYPE_LEVEL_HIGH>, <&intc 0 119 IRQ_TYPE_LEVEL_HIGH>; + fsl,err006687-workaround-present; status = "okay"; }; @@ -233,7 +234,7 @@ &uart3 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart3>; - fsl,uart-has-rtscts; + uart-has-rtscts; status = "okay"; }; diff --git a/arch/arm/boot/dts/imx6qdl.dtsi b/arch/arm/boot/dts/imx6qdl.dtsi index 50b7e50a0..be2e7475e 100644 --- a/arch/arm/boot/dts/imx6qdl.dtsi +++ b/arch/arm/boot/dts/imx6qdl.dtsi @@ -185,6 +185,7 @@ cache-level = <2>; arm,tag-latency = <4 2 3>; arm,data-latency = <4 2 3>; + arm,shared-override; }; pcie: pcie@0x01000000 { @@ -1100,6 +1101,7 @@ ocotp: ocotp@021bc000 { compatible = "fsl,imx6q-ocotp", "syscon"; reg = <0x021bc000 0x4000>; + clocks = <&clks IMX6QDL_CLK_IIM>; }; tzasc@021d0000 { /* TZASC1 */ @@ -1255,7 +1257,7 @@ #size-cells = <0>; reg = <3>; - ipu1_di0_disp1: disp1-endpoint { + ipu1_di1_disp1: disp1-endpoint { }; ipu1_di1_hdmi: hdmi-endpoint { diff --git a/arch/arm/boot/dts/imx6sl-warp.dts b/arch/arm/boot/dts/imx6sl-warp.dts index 058bcdceb..72c7745f5 100644 --- a/arch/arm/boot/dts/imx6sl-warp.dts +++ b/arch/arm/boot/dts/imx6sl-warp.dts @@ -84,7 +84,7 @@ &uart5 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart5>; - fsl,uart-has-rtscts; + uart-has-rtscts; status = "okay"; }; diff --git a/arch/arm/boot/dts/imx6sl.dtsi b/arch/arm/boot/dts/imx6sl.dtsi index 56922dc7c..7fa0e4535 100644 --- a/arch/arm/boot/dts/imx6sl.dtsi +++ b/arch/arm/boot/dts/imx6sl.dtsi @@ -461,7 +461,7 @@ <0 54 IRQ_TYPE_LEVEL_HIGH>, <0 127 IRQ_TYPE_LEVEL_HIGH>; - regulator-1p1@110 { + regulator-1p1 { compatible = "fsl,anatop-regulator"; regulator-name = "vdd1p1"; regulator-min-microvolt = <800000>; @@ -475,7 +475,7 @@ anatop-max-voltage = <1375000>; }; - regulator-3p0@120 { + regulator-3p0 { compatible = "fsl,anatop-regulator"; regulator-name = "vdd3p0"; regulator-min-microvolt = <2800000>; @@ -489,7 +489,7 @@ anatop-max-voltage = <3400000>; }; - regulator-2p5@130 { + regulator-2p5 { compatible = "fsl,anatop-regulator"; regulator-name = "vdd2p5"; regulator-min-microvolt = <2100000>; @@ -503,7 +503,7 @@ anatop-max-voltage = <2850000>; }; - reg_arm: regulator-vddcore@140 { + reg_arm: regulator-vddcore { compatible = "fsl,anatop-regulator"; regulator-name = "vddarm"; regulator-min-microvolt = <725000>; @@ -520,7 +520,7 @@ anatop-max-voltage = <1450000>; }; - reg_pu: regulator-vddpu@140 { + reg_pu: regulator-vddpu { compatible = "fsl,anatop-regulator"; regulator-name = "vddpu"; regulator-min-microvolt = <725000>; @@ -537,7 +537,7 @@ anatop-max-voltage = <1450000>; }; - reg_soc: regulator-vddsoc@140 { + reg_soc: regulator-vddsoc { compatible = "fsl,anatop-regulator"; regulator-name = "vddsoc"; regulator-min-microvolt = <725000>; @@ -853,6 +853,7 @@ ocotp: ocotp@021bc000 { compatible = "fsl,imx6sl-ocotp", "syscon"; reg = <0x021bc000 0x4000>; + clocks = <&clks IMX6SL_CLK_OCOTP>; }; audmux: audmux@021d8000 { diff --git a/arch/arm/boot/dts/imx6sx-nitrogen6sx.dts b/arch/arm/boot/dts/imx6sx-nitrogen6sx.dts index ba62348d8..9b817f350 100644 --- a/arch/arm/boot/dts/imx6sx-nitrogen6sx.dts +++ b/arch/arm/boot/dts/imx6sx-nitrogen6sx.dts @@ -326,7 +326,7 @@ &uart3 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart3>; - fsl,uart-has-rtscts; + uart-has-rtscts; status = "okay"; }; diff --git a/arch/arm/boot/dts/imx6sx-sabreauto.dts b/arch/arm/boot/dts/imx6sx-sabreauto.dts index 96ea936ee..240a2864d 100644 --- a/arch/arm/boot/dts/imx6sx-sabreauto.dts +++ b/arch/arm/boot/dts/imx6sx-sabreauto.dts @@ -64,7 +64,7 @@ cd-gpios = <&gpio7 11 GPIO_ACTIVE_LOW>; no-1-8-v; keep-power-in-suspend; - enable-sdio-wakup; + wakeup-source; status = "okay"; }; diff --git a/arch/arm/boot/dts/imx6sx-sdb.dtsi b/arch/arm/boot/dts/imx6sx-sdb.dtsi index e5eafe4d9..9d70cfd40 100644 --- a/arch/arm/boot/dts/imx6sx-sdb.dtsi +++ b/arch/arm/boot/dts/imx6sx-sdb.dtsi @@ -273,7 +273,7 @@ &uart5 { /* for bluetooth */ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart5>; - fsl,uart-has-rtscts; + uart-has-rtscts; status = "okay"; }; @@ -322,6 +322,12 @@ status = "okay"; }; +&wdog1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_wdog>; + fsl,ext-reset-output; +}; + &iomuxc { imx6x-sdb { pinctrl_audmux: audmuxgrp { @@ -588,5 +594,11 @@ MX6SX_PAD_SD4_DATA6__GPIO6_IO_20 0x17059 /* WP */ >; }; + + pinctrl_wdog: wdoggrp { + fsl,pins = < + MX6SX_PAD_GPIO1_IO13__WDOG1_WDOG_ANY 0x30b0 + >; + }; }; }; diff --git a/arch/arm/boot/dts/imx6sx.dtsi b/arch/arm/boot/dts/imx6sx.dtsi index 095414990..fad14bdf9 100644 --- a/arch/arm/boot/dts/imx6sx.dtsi +++ b/arch/arm/boot/dts/imx6sx.dtsi @@ -547,7 +547,7 @@ <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>; - regulator-1p1@110 { + regulator-1p1 { compatible = "fsl,anatop-regulator"; regulator-name = "vdd1p1"; regulator-min-microvolt = <800000>; @@ -561,7 +561,7 @@ anatop-max-voltage = <1375000>; }; - regulator-3p0@120 { + regulator-3p0 { compatible = "fsl,anatop-regulator"; regulator-name = "vdd3p0"; regulator-min-microvolt = <2800000>; @@ -575,7 +575,7 @@ anatop-max-voltage = <3400000>; }; - regulator-2p5@130 { + regulator-2p5 { compatible = "fsl,anatop-regulator"; regulator-name = "vdd2p5"; regulator-min-microvolt = <2100000>; @@ -589,7 +589,7 @@ anatop-max-voltage = <2875000>; }; - reg_arm: regulator-vddcore@140 { + reg_arm: regulator-vddcore { compatible = "fsl,anatop-regulator"; regulator-name = "vddarm"; regulator-min-microvolt = <725000>; @@ -606,7 +606,7 @@ anatop-max-voltage = <1450000>; }; - reg_pcie: regulator-vddpcie@140 { + reg_pcie: regulator-vddpcie { compatible = "fsl,anatop-regulator"; regulator-name = "vddpcie"; regulator-min-microvolt = <725000>; @@ -622,7 +622,7 @@ anatop-max-voltage = <1450000>; }; - reg_soc: regulator-vddsoc@140 { + reg_soc: regulator-vddsoc { compatible = "fsl,anatop-regulator"; regulator-name = "vddsoc"; regulator-min-microvolt = <725000>; diff --git a/arch/arm/boot/dts/imx6ul-14x14-evk.dts b/arch/arm/boot/dts/imx6ul-14x14-evk.dts index 668a72997..e281d5087 100644 --- a/arch/arm/boot/dts/imx6ul-14x14-evk.dts +++ b/arch/arm/boot/dts/imx6ul-14x14-evk.dts @@ -22,6 +22,14 @@ reg = <0x80000000 0x20000000>; }; + backlight { + compatible = "pwm-backlight"; + pwms = <&pwm1 0 5000000>; + brightness-levels = <0 4 8 16 32 64 128 255>; + default-brightness-level = <6>; + status = "okay"; + }; + regulators { compatible = "simple-bus"; #address-cells = <1>; @@ -125,6 +133,46 @@ }; }; + +&lcdif { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_lcdif_dat + &pinctrl_lcdif_ctrl>; + display = <&display0>; + status = "okay"; + + display0: display { + bits-per-pixel = <16>; + bus-width = <24>; + + display-timings { + native-mode = <&timing0>; + + timing0: timing0 { + clock-frequency = <9200000>; + hactive = <480>; + vactive = <272>; + hfront-porch = <8>; + hback-porch = <4>; + hsync-len = <41>; + vback-porch = <2>; + vfront-porch = <4>; + vsync-len = <10>; + hsync-active = <0>; + vsync-active = <0>; + de-active = <1>; + pixelclk-active = <0>; + }; + }; + }; +}; + +&pwm1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm1>; + status = "okay"; +}; + &qspi { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_qspi>; @@ -146,6 +194,7 @@ <&clks IMX6UL_CLK_SAI2>; assigned-clock-parents = <&clks IMX6UL_CLK_PLL4_AUDIO_DIV>; assigned-clock-rates = <0>, <12288000>; + fsl,sai-mclk-direction-output; status = "okay"; }; @@ -171,7 +220,7 @@ &uart2 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart2>; - fsl,uart-has-rtscts; + uart-has-rtscts; status = "okay"; }; @@ -207,6 +256,12 @@ status = "okay"; }; +&wdog1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_wdog>; + fsl,ext-reset-output; +}; + &iomuxc { pinctrl-names = "default"; @@ -435,4 +490,10 @@ MX6UL_PAD_NAND_DATA03__USDHC2_DATA3 0x17059 >; }; + + pinctrl_wdog: wdoggrp { + fsl,pins = < + MX6UL_PAD_LCD_RESET__WDOG1_WDOG_ANY 0x30b0 + >; + }; }; diff --git a/arch/arm/boot/dts/imx6ul-pico-hobbit.dts b/arch/arm/boot/dts/imx6ul-pico-hobbit.dts index 8ce1fec36..86f68fade 100644 --- a/arch/arm/boot/dts/imx6ul-pico-hobbit.dts +++ b/arch/arm/boot/dts/imx6ul-pico-hobbit.dts @@ -151,8 +151,8 @@ phy-mode = "rmii"; phy-handle = <ðphy1>; status = "okay"; - phy-reset-gpios = <&gpio2 15 GPIO_ACTIVE_LOW>; - phy-reset-duration = <11>; + phy-reset-gpios = <&gpio1 28 GPIO_ACTIVE_LOW>; + phy-reset-duration = <1>; mdio { #address-cells = <1>; @@ -286,7 +286,7 @@ &uart3 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart3>; - fsl,uart-has-rtscts; + uart-has-rtscts; status = "okay"; }; diff --git a/arch/arm/boot/dts/imx6ul-tx6ul-mainboard.dts b/arch/arm/boot/dts/imx6ul-tx6ul-mainboard.dts index d25899b71..7c5dd1b31 100644 --- a/arch/arm/boot/dts/imx6ul-tx6ul-mainboard.dts +++ b/arch/arm/boot/dts/imx6ul-tx6ul-mainboard.dts @@ -146,12 +146,12 @@ &uart1 { pinctrl-0 = <&pinctrl_uart1>; - /delete-property/ fsl,uart-has-rtscts; + /delete-property/ uart-has-rtscts; }; &uart2 { pinctrl-0 = <&pinctrl_uart2>; - /delete-property/ fsl,uart-has-rtscts; + /delete-property/ uart-has-rtscts; status = "okay"; }; diff --git a/arch/arm/boot/dts/imx6ul-tx6ul.dtsi b/arch/arm/boot/dts/imx6ul-tx6ul.dtsi index 437e9aad5..530e9ca13 100644 --- a/arch/arm/boot/dts/imx6ul-tx6ul.dtsi +++ b/arch/arm/boot/dts/imx6ul-tx6ul.dtsi @@ -563,21 +563,21 @@ &uart1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart1 &pinctrl_uart1_rtscts>; - fsl,uart-has-rtscts; + uart-has-rtscts; status = "okay"; }; &uart2 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart2 &pinctrl_uart2_rtscts>; - fsl,uart-has-rtscts; + uart-has-rtscts; status = "okay"; }; &uart5 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart5 &pinctrl_uart5_rtscts>; - fsl,uart-has-rtscts; + uart-has-rtscts; status = "okay"; }; diff --git a/arch/arm/boot/dts/imx6ul.dtsi b/arch/arm/boot/dts/imx6ul.dtsi index 1d6ea1ac5..061e594e7 100644 --- a/arch/arm/boot/dts/imx6ul.dtsi +++ b/arch/arm/boot/dts/imx6ul.dtsi @@ -36,6 +36,9 @@ serial5 = &uart6; serial6 = &uart7; serial7 = &uart8; + sai1 = &sai1; + sai2 = &sai2; + sai3 = &sai3; spi0 = &ecspi1; spi1 = &ecspi2; spi2 = &ecspi3; @@ -512,7 +515,7 @@ <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>; - reg_3p0: regulator-3p0@120 { + reg_3p0: regulator-3p0 { compatible = "fsl,anatop-regulator"; regulator-name = "vdd3p0"; regulator-min-microvolt = <2625000>; @@ -526,7 +529,7 @@ anatop-enable-bit = <0>; }; - reg_arm: regulator-vddcore@140 { + reg_arm: regulator-vddcore { compatible = "fsl,anatop-regulator"; regulator-name = "cpu"; regulator-min-microvolt = <725000>; @@ -543,7 +546,7 @@ anatop-max-voltage = <1450000>; }; - reg_soc: regulator-vddsoc@140 { + reg_soc: regulator-vddsoc { compatible = "fsl,anatop-regulator"; regulator-name = "vddsoc"; regulator-min-microvolt = <725000>; diff --git a/arch/arm/boot/dts/imx7-colibri-eval-v3.dtsi b/arch/arm/boot/dts/imx7-colibri-eval-v3.dtsi new file mode 100644 index 000000000..1545661df --- /dev/null +++ b/arch/arm/boot/dts/imx7-colibri-eval-v3.dtsi @@ -0,0 +1,148 @@ +/* + * Copyright 2016 Toradex AG + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/ { + chosen { + stdout-path = "serial0:115200n8"; + }; +}; + +&bl { + brightness-levels = <0 4 8 16 32 64 128 255>; + default-brightness-level = <6>; + status = "okay"; +}; + +&adc1 { + status = "okay"; +}; + +&adc2 { + status = "okay"; +}; + +&fec1 { + status = "okay"; +}; + +&i2c4 { + status = "okay"; + + /* M41T0M6 real time clock on carrier board */ + rtc: m41t0m6@68 { + compatible = "st,m41t00"; + reg = <0x68>; + }; +}; + +&lcdif { + display = <&display0>; + status = "okay"; + + display0: lcd-display { + bits-per-pixel = <16>; + bus-width = <18>; + + display-timings { + native-mode = <&timing_vga>; + + /* Standard VGA timing */ + timing_vga: 640x480 { + clock-frequency = <25175000>; + hactive = <640>; + vactive = <480>; + hback-porch = <40>; + hfront-porch = <24>; + vback-porch = <32>; + vfront-porch = <11>; + hsync-len = <96>; + vsync-len = <2>; + de-active = <1>; + hsync-active = <0>; + vsync-active = <0>; + pixelclk-active = <0>; + }; + }; + }; +}; + +&pwm1 { + status = "okay"; +}; + +&pwm2 { + status = "okay"; +}; + +&pwm3 { + status = "okay"; +}; + +&pwm4 { + status = "okay"; +}; + +&uart1 { + status = "okay"; +}; + +&uart2 { + status = "okay"; +}; + +&uart3 { + status = "okay"; +}; + +&usbotg1 { + status = "okay"; +}; + +&usdhc1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc1 &pinctrl_cd_usdhc1>; + no-1-8-v; + cd-gpios = <&gpio1 0 GPIO_ACTIVE_LOW>; + keep-power-in-suspend; + wakeup-source; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/imx7-colibri.dtsi b/arch/arm/boot/dts/imx7-colibri.dtsi new file mode 100644 index 000000000..0a9d3a822 --- /dev/null +++ b/arch/arm/boot/dts/imx7-colibri.dtsi @@ -0,0 +1,571 @@ +/* + * Copyright 2016 Toradex AG + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/ { + bl: backlight { + compatible = "pwm-backlight"; + pwms = <&pwm1 0 5000000>; + }; + + reg_3p3v: regulator-3p3v { + compatible = "regulator-fixed"; + regulator-name = "3P3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + reg_vref_1v8: regulator-vref-1v8 { + compatible = "regulator-fixed"; + regulator-name = "vref-1v8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; +}; + +&adc1 { + vref-supply = <®_vref_1v8>; +}; + +&adc2 { + vref-supply = <®_vref_1v8>; +}; + +&cpu0 { + arm-supply = <®_DCDC2>; +}; + +&fec1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_enet1>; + clocks = <&clks IMX7D_ENET_AXI_ROOT_CLK>, + <&clks IMX7D_ENET_AXI_ROOT_CLK>, + <&clks IMX7D_ENET1_TIME_ROOT_CLK>, + <&clks IMX7D_PLL_ENET_MAIN_50M_CLK>; + clock-names = "ipg", "ahb", "ptp", "enet_clk_ref"; + assigned-clocks = <&clks IMX7D_ENET1_TIME_ROOT_SRC>, + <&clks IMX7D_ENET1_TIME_ROOT_CLK>; + assigned-clock-parents = <&clks IMX7D_PLL_ENET_MAIN_100M_CLK>; + assigned-clock-rates = <0>, <100000000>; + phy-mode = "rmii"; + phy-supply = <®_LDO1>; + fsl,magic-packet; +}; + +&i2c1 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c1 &pinctrl_i2c1_int>; + status = "okay"; + + ad7879@2c { + compatible = "adi,ad7879-1"; + reg = <0x2c>; + interrupt-parent = <&gpio1>; + interrupts = <13 IRQ_TYPE_EDGE_FALLING>; + touchscreen-max-pressure = <4096>; + adi,resistance-plate-x = <120>; + adi,first-conversion-delay = /bits/ 8 <3>; + adi,acquisition-time = /bits/ 8 <1>; + adi,median-filter-size = /bits/ 8 <2>; + adi,averaging = /bits/ 8 <1>; + adi,conversion-interval = /bits/ 8 <255>; + }; + + pmic@33 { + compatible = "ricoh,rn5t567"; + reg = <0x33>; + + regulators { + reg_DCDC1: DCDC1 { /* V1.0_SOC */ + regulator-min-microvolt = <975000>; + regulator-max-microvolt = <1125000>; + regulator-boot-on; + regulator-always-on; + }; + + reg_DCDC2: DCDC2 { /* V1.1_ARM */ + regulator-min-microvolt = <975000>; + regulator-max-microvolt = <1125000>; + regulator-boot-on; + regulator-always-on; + }; + + reg_DCDC3: DCDC3 { /* V1.8 */ + regulator-min-microvolt = <1775000>; + regulator-max-microvolt = <1825000>; + regulator-boot-on; + regulator-always-on; + }; + + reg_DCDC4: DCDC4 { /* V1.35_DRAM */ + regulator-min-microvolt = <1325000>; + regulator-max-microvolt = <1375000>; + regulator-boot-on; + regulator-always-on; + }; + + reg_LDO1: LDO1 { /* PWR_EN_+V3.3_ETH */ + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + reg_LDO2: LDO2 { /* +V1.8_SD */ + regulator-min-microvolt = <1775000>; + regulator-max-microvolt = <3325000>; + regulator-boot-on; + regulator-always-on; + }; + + reg_LDO3: LDO3 { /* PWR_EN_+V3.3_LPSR */ + regulator-min-microvolt = <3275000>; + regulator-max-microvolt = <3325000>; + regulator-boot-on; + regulator-always-on; + }; + + reg_LDO4: LDO4 { /* V1.8_LPSR */ + regulator-min-microvolt = <1775000>; + regulator-max-microvolt = <1825000>; + regulator-boot-on; + regulator-always-on; + }; + + reg_LDO5: LDO5 { /* PWR_EN_+V3.3 */ + regulator-min-microvolt = <1775000>; + regulator-max-microvolt = <1825000>; + regulator-boot-on; + regulator-always-on; + }; + }; + }; +}; + +&i2c4 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c4>; +}; + +&lcdif { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_lcdif_dat + &pinctrl_lcdif_ctrl>; +}; + +&pwm1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm1>; +}; + +&pwm2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm2>; +}; + +&pwm3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm3>; +}; + +&pwm4 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm4>; +}; + +®_1p0d { + vin-supply = <®_DCDC3>; +}; + +&snvs_pwrkey { + status = "disabled"; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1 &pinctrl_uart1_ctrl1 &pinctrl_uart1_ctrl2>; + assigned-clocks = <&clks IMX7D_UART1_ROOT_SRC>; + assigned-clock-parents = <&clks IMX7D_OSC_24M_CLK>; + uart-has-rtscts; + fsl,dte-mode; +}; + +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart2>; + assigned-clocks = <&clks IMX7D_UART2_ROOT_SRC>; + assigned-clock-parents = <&clks IMX7D_OSC_24M_CLK>; + uart-has-rtscts; + fsl,dte-mode; +}; + +&uart3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart3>; + assigned-clocks = <&clks IMX7D_UART3_ROOT_SRC>; + assigned-clock-parents = <&clks IMX7D_OSC_24M_CLK>; + fsl,dte-mode; +}; + +&usbotg1 { + dr_mode = "host"; +}; + +&iomuxc { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpio1 &pinctrl_gpio2 &pinctrl_gpio3 &pinctrl_gpio4>; + + pinctrl_gpio1: gpio1-grp { + fsl,pins = < + MX7D_PAD_ENET1_RGMII_RD3__GPIO7_IO3 0x14 /* SODIMM 55 */ + MX7D_PAD_ENET1_RGMII_RD2__GPIO7_IO2 0x14 /* SODIMM 63 */ + MX7D_PAD_SD1_RESET_B__GPIO5_IO2 0X14 /* SODIMM 73 */ + MX7D_PAD_SAI1_RX_SYNC__GPIO6_IO16 0X14 /* SODIMM 77 */ + MX7D_PAD_EPDC_DATA09__GPIO2_IO9 0x14 /* SODIMM 89 */ + MX7D_PAD_EPDC_DATA08__GPIO2_IO8 0x14 /* SODIMM 91 */ + MX7D_PAD_LCD_RESET__GPIO3_IO4 0x14 /* SODIMM 93 */ + MX7D_PAD_EPDC_DATA13__GPIO2_IO13 0x14 /* SODIMM 95 */ + MX7D_PAD_ENET1_RGMII_TXC__GPIO7_IO11 0x14 /* SODIMM 99 */ + MX7D_PAD_EPDC_DATA10__GPIO2_IO10 0x14 /* SODIMM 105 */ + MX7D_PAD_EPDC_DATA15__GPIO2_IO15 0x14 /* SODIMM 107 */ + MX7D_PAD_EPDC_DATA00__GPIO2_IO0 0x14 /* SODIMM 111 */ + MX7D_PAD_EPDC_DATA01__GPIO2_IO1 0x14 /* SODIMM 113 */ + MX7D_PAD_EPDC_DATA02__GPIO2_IO2 0x14 /* SODIMM 115 */ + MX7D_PAD_EPDC_DATA03__GPIO2_IO3 0x14 /* SODIMM 117 */ + MX7D_PAD_EPDC_DATA04__GPIO2_IO4 0x14 /* SODIMM 119 */ + MX7D_PAD_EPDC_DATA05__GPIO2_IO5 0x14 /* SODIMM 121 */ + MX7D_PAD_EPDC_DATA06__GPIO2_IO6 0x14 /* SODIMM 123 */ + MX7D_PAD_EPDC_DATA07__GPIO2_IO7 0x14 /* SODIMM 125 */ + MX7D_PAD_EPDC_SDCE2__GPIO2_IO22 0x14 /* SODIMM 127 */ + MX7D_PAD_UART3_RTS_B__GPIO4_IO6 0x14 /* SODIMM 131 */ + MX7D_PAD_EPDC_GDRL__GPIO2_IO26 0x14 /* SODIMM 133 */ + MX7D_PAD_SAI1_RX_BCLK__GPIO6_IO17 0x14 /* SODIMM 24 */ + MX7D_PAD_SD2_DATA2__GPIO5_IO16 0x14 /* SODIMM 100 */ + MX7D_PAD_SD2_DATA3__GPIO5_IO17 0x14 /* SODIMM 102 */ + MX7D_PAD_EPDC_GDSP__GPIO2_IO27 0x14 /* SODIMM 104 */ + MX7D_PAD_EPDC_BDR0__GPIO2_IO28 0x14 /* SODIMM 106 */ + MX7D_PAD_EPDC_BDR1__GPIO2_IO29 0x14 /* SODIMM 110 */ + MX7D_PAD_EPDC_PWR_COM__GPIO2_IO30 0x14 /* SODIMM 112 */ + MX7D_PAD_EPDC_SDCLK__GPIO2_IO16 0x14 /* SODIMM 114 */ + MX7D_PAD_EPDC_SDLE__GPIO2_IO17 0x14 /* SODIMM 116 */ + MX7D_PAD_EPDC_SDOE__GPIO2_IO18 0x14 /* SODIMM 118 */ + MX7D_PAD_EPDC_SDSHR__GPIO2_IO19 0x14 /* SODIMM 120 */ + MX7D_PAD_EPDC_SDCE0__GPIO2_IO20 0x14 /* SODIMM 122 */ + MX7D_PAD_EPDC_SDCE1__GPIO2_IO21 0x14 /* SODIMM 124 */ + MX7D_PAD_EPDC_DATA14__GPIO2_IO14 0x14 /* SODIMM 126 */ + MX7D_PAD_EPDC_PWR_STAT__GPIO2_IO31 0x14 /* SODIMM 128 */ + MX7D_PAD_EPDC_SDCE3__GPIO2_IO23 0x14 /* SODIMM 130 */ + MX7D_PAD_EPDC_GDCLK__GPIO2_IO24 0x14 /* SODIMM 132 */ + MX7D_PAD_EPDC_GDOE__GPIO2_IO25 0x14 /* SODIMM 134 */ + MX7D_PAD_EPDC_DATA12__GPIO2_IO12 0x14 /* SODIMM 150 */ + MX7D_PAD_EPDC_DATA11__GPIO2_IO11 0x14 /* SODIMM 152 */ + MX7D_PAD_SD2_CLK__GPIO5_IO12 0x14 /* SODIMM 184 */ + MX7D_PAD_SD2_CMD__GPIO5_IO13 0x14 /* SODIMM 186 */ + >; + }; + + pinctrl_gpio2: gpio2-grp { /* On X22 Camera interface */ + fsl,pins = < + MX7D_PAD_ECSPI2_SS0__GPIO4_IO23 0x14 /* SODIMM 65 */ + MX7D_PAD_SD1_CD_B__GPIO5_IO0 0x14 /* SODIMM 69 */ + MX7D_PAD_SD1_WP__GPIO5_IO1 0x14 /* SODIMM 71 */ + MX7D_PAD_I2C4_SDA__GPIO4_IO15 0x14 /* SODIMM 75 */ + MX7D_PAD_ECSPI1_MISO__GPIO4_IO18 0x14 /* SODIMM 79 */ + MX7D_PAD_I2C3_SCL__GPIO4_IO12 0x14 /* SODIMM 81 */ + MX7D_PAD_ECSPI2_MISO__GPIO4_IO22 0x14 /* SODIMM 85 */ + MX7D_PAD_ECSPI1_SS0__GPIO4_IO19 0x14 /* SODIMM 97 */ + MX7D_PAD_ECSPI1_SCLK__GPIO4_IO16 0x14 /* SODIMM 101 */ + MX7D_PAD_ECSPI1_MOSI__GPIO4_IO17 0x14 /* SODIMM 103 */ + MX7D_PAD_I2C3_SDA__GPIO4_IO13 0x14 /* SODIMM 94 */ + MX7D_PAD_I2C4_SCL__GPIO4_IO14 0x14 /* SODIMM 96 */ + MX7D_PAD_SD2_RESET_B__GPIO5_IO11 0x14 /* SODIMM 98 */ + >; + }; + + pinctrl_gpio3: gpio3-grp { /* LCD 18-23 */ + fsl,pins = < + MX7D_PAD_LCD_DATA18__GPIO3_IO23 0x14 /* SODIMM 136 */ + MX7D_PAD_LCD_DATA19__GPIO3_IO24 0x14 /* SODIMM 138 */ + MX7D_PAD_LCD_DATA20__GPIO3_IO25 0x14 /* SODIMM 140 */ + MX7D_PAD_LCD_DATA21__GPIO3_IO26 0x14 /* SODIMM 142 */ + MX7D_PAD_LCD_DATA22__GPIO3_IO27 0x14 /* SODIMM 146 */ + MX7D_PAD_LCD_DATA23__GPIO3_IO28 0x14 /* SODIMM 148 */ + >; + }; + + pinctrl_gpio4: gpio4-grp { /* Alternatively CAN2 */ + fsl,pins = < + MX7D_PAD_GPIO1_IO15__GPIO1_IO15 0x14 /* SODIMM 178 */ + MX7D_PAD_GPIO1_IO14__GPIO1_IO14 0x14 /* SODIMM 188 */ + >; + }; + + pinctrl_i2c1_int: i2c1-int-grp { /* PMIC / TOUCH */ + fsl,pins = < + MX7D_PAD_GPIO1_IO13__GPIO1_IO13 0x79 + >; + }; + + pinctrl_enet1: enet1grp { + fsl,pins = < + MX7D_PAD_ENET1_CRS__GPIO7_IO14 0x14 + MX7D_PAD_ENET1_RGMII_RX_CTL__ENET1_RGMII_RX_CTL 0x73 + MX7D_PAD_ENET1_RGMII_RD0__ENET1_RGMII_RD0 0x73 + MX7D_PAD_ENET1_RGMII_RD1__ENET1_RGMII_RD1 0x73 + MX7D_PAD_ENET1_RGMII_RXC__ENET1_RX_ER 0x73 + + MX7D_PAD_ENET1_RGMII_TX_CTL__ENET1_RGMII_TX_CTL 0x73 + MX7D_PAD_ENET1_RGMII_TD0__ENET1_RGMII_TD0 0x73 + MX7D_PAD_ENET1_RGMII_TD1__ENET1_RGMII_TD1 0x73 + MX7D_PAD_GPIO1_IO12__CCM_ENET_REF_CLK1 0x73 + MX7D_PAD_SD2_CD_B__ENET1_MDIO 0x3 + MX7D_PAD_SD2_WP__ENET1_MDC 0x3 + >; + }; + + pinctrl_ecspi3_cs: ecspi3-cs-grp { + fsl,pins = < + MX7D_PAD_I2C2_SDA__GPIO4_IO11 0x14 + >; + }; + + pinctrl_ecspi3: ecspi3-grp { + fsl,pins = < + MX7D_PAD_I2C1_SCL__ECSPI3_MISO 0x2 + MX7D_PAD_I2C1_SDA__ECSPI3_MOSI 0x2 + MX7D_PAD_I2C2_SCL__ECSPI3_SCLK 0x2 + >; + }; + + pinctrl_flexcan2: flexcan2-grp { + fsl,pins = < + MX7D_PAD_GPIO1_IO14__FLEXCAN2_RX 0x59 + MX7D_PAD_GPIO1_IO15__FLEXCAN2_TX 0x59 + >; + }; + + pinctrl_gpmi_nand: gpmi-nand-grp { + fsl,pins = < + MX7D_PAD_SD3_CLK__NAND_CLE 0x71 + MX7D_PAD_SD3_CMD__NAND_ALE 0x71 + MX7D_PAD_SAI1_TX_BCLK__NAND_CE0_B 0x71 + MX7D_PAD_SAI1_RX_DATA__NAND_CE1_B 0x71 + MX7D_PAD_SAI1_TX_DATA__NAND_READY_B 0x74 + MX7D_PAD_SD3_STROBE__NAND_RE_B 0x71 + MX7D_PAD_SD3_RESET_B__NAND_WE_B 0x71 + MX7D_PAD_SD3_DATA0__NAND_DATA00 0x71 + MX7D_PAD_SD3_DATA1__NAND_DATA01 0x71 + MX7D_PAD_SD3_DATA2__NAND_DATA02 0x71 + MX7D_PAD_SD3_DATA3__NAND_DATA03 0x71 + MX7D_PAD_SD3_DATA4__NAND_DATA04 0x71 + MX7D_PAD_SD3_DATA5__NAND_DATA05 0x71 + MX7D_PAD_SD3_DATA6__NAND_DATA06 0x71 + MX7D_PAD_SD3_DATA7__NAND_DATA07 0x71 + >; + }; + + pinctrl_i2c4: i2c4-grp { + fsl,pins = < + MX7D_PAD_ENET1_RGMII_TD3__I2C4_SDA 0x4000007f + MX7D_PAD_ENET1_RGMII_TD2__I2C4_SCL 0x4000007f + >; + }; + + pinctrl_lcdif_dat: lcdif-dat-grp { + fsl,pins = < + MX7D_PAD_LCD_DATA00__LCD_DATA0 0x79 + MX7D_PAD_LCD_DATA01__LCD_DATA1 0x79 + MX7D_PAD_LCD_DATA02__LCD_DATA2 0x79 + MX7D_PAD_LCD_DATA03__LCD_DATA3 0x79 + MX7D_PAD_LCD_DATA04__LCD_DATA4 0x79 + MX7D_PAD_LCD_DATA05__LCD_DATA5 0x79 + MX7D_PAD_LCD_DATA06__LCD_DATA6 0x79 + MX7D_PAD_LCD_DATA07__LCD_DATA7 0x79 + MX7D_PAD_LCD_DATA08__LCD_DATA8 0x79 + MX7D_PAD_LCD_DATA09__LCD_DATA9 0x79 + MX7D_PAD_LCD_DATA10__LCD_DATA10 0x79 + MX7D_PAD_LCD_DATA11__LCD_DATA11 0x79 + MX7D_PAD_LCD_DATA12__LCD_DATA12 0x79 + MX7D_PAD_LCD_DATA13__LCD_DATA13 0x79 + MX7D_PAD_LCD_DATA14__LCD_DATA14 0x79 + MX7D_PAD_LCD_DATA15__LCD_DATA15 0x79 + MX7D_PAD_LCD_DATA16__LCD_DATA16 0x79 + MX7D_PAD_LCD_DATA17__LCD_DATA17 0x79 + >; + }; + + pinctrl_lcdif_dat_24: lcdif-dat-24-grp { + fsl,pins = < + MX7D_PAD_LCD_DATA18__LCD_DATA18 0x79 + MX7D_PAD_LCD_DATA19__LCD_DATA19 0x79 + MX7D_PAD_LCD_DATA20__LCD_DATA20 0x79 + MX7D_PAD_LCD_DATA21__LCD_DATA21 0x79 + MX7D_PAD_LCD_DATA22__LCD_DATA22 0x79 + MX7D_PAD_LCD_DATA23__LCD_DATA23 0x79 + >; + }; + + pinctrl_lcdif_ctrl: lcdif-ctrl-grp { + fsl,pins = < + MX7D_PAD_LCD_CLK__LCD_CLK 0x79 + MX7D_PAD_LCD_ENABLE__LCD_ENABLE 0x79 + MX7D_PAD_LCD_VSYNC__LCD_VSYNC 0x79 + MX7D_PAD_LCD_HSYNC__LCD_HSYNC 0x79 + >; + }; + + pinctrl_pwm1: pwm1-grp { + fsl,pins = < + MX7D_PAD_GPIO1_IO08__PWM1_OUT 0x79 + >; + }; + + pinctrl_pwm2: pwm2-grp { + fsl,pins = < + MX7D_PAD_GPIO1_IO09__PWM2_OUT 0x79 + >; + }; + + pinctrl_pwm3: pwm3-grp { + fsl,pins = < + MX7D_PAD_GPIO1_IO10__PWM3_OUT 0x79 + >; + }; + + pinctrl_pwm4: pwm4-grp { + fsl,pins = < + MX7D_PAD_GPIO1_IO11__PWM4_OUT 0x79 + >; + }; + + pinctrl_uart1: uart1-grp { + fsl,pins = < + MX7D_PAD_UART1_TX_DATA__UART1_DTE_RX 0x79 + MX7D_PAD_UART1_RX_DATA__UART1_DTE_TX 0x79 + MX7D_PAD_SAI2_TX_BCLK__UART1_DTE_CTS 0x79 + MX7D_PAD_SAI2_TX_SYNC__UART1_DTE_RTS 0x79 + >; + }; + + pinctrl_uart1_ctrl1: uart1-ctrl1-grp { + fsl,pins = < + MX7D_PAD_SD2_DATA1__GPIO5_IO15 0x14 /* DCD */ + MX7D_PAD_SD2_DATA0__GPIO5_IO14 0x14 /* DTR */ + >; + }; + + pinctrl_uart2: uart2-grp { + fsl,pins = < + MX7D_PAD_UART2_TX_DATA__UART2_DTE_RX 0x79 + MX7D_PAD_UART2_RX_DATA__UART2_DTE_TX 0x79 + MX7D_PAD_SAI2_RX_DATA__UART2_DTE_RTS 0x79 + MX7D_PAD_SAI2_TX_DATA__UART2_DTE_CTS 0x79 + >; + }; + pinctrl_uart3: uart3-grp { + fsl,pins = < + MX7D_PAD_UART3_TX_DATA__UART3_DTE_RX 0x79 + MX7D_PAD_UART3_RX_DATA__UART3_DTE_TX 0x79 + >; + }; + + pinctrl_usbotg2_reg: gpio-usbotg2-vbus { + fsl,pins = < + MX7D_PAD_UART3_CTS_B__GPIO4_IO7 0x14 /* SODIMM 129 USBH PEN */ + >; + }; + + pinctrl_usdhc1: usdhc1-grp { + fsl,pins = < + MX7D_PAD_SD1_CMD__SD1_CMD 0x59 + MX7D_PAD_SD1_CLK__SD1_CLK 0x19 + MX7D_PAD_SD1_DATA0__SD1_DATA0 0x59 + MX7D_PAD_SD1_DATA1__SD1_DATA1 0x59 + MX7D_PAD_SD1_DATA2__SD1_DATA2 0x59 + MX7D_PAD_SD1_DATA3__SD1_DATA3 0x59 + >; + }; + + pinctrl_sai1: sai1-grp { + fsl,pins = < + MX7D_PAD_SAI1_MCLK__SAI1_MCLK 0x1f + MX7D_PAD_ENET1_RX_CLK__SAI1_TX_BCLK 0x1f + MX7D_PAD_SAI1_TX_SYNC__SAI1_TX_SYNC 0x1f + MX7D_PAD_ENET1_COL__SAI1_TX_DATA0 0x30 + MX7D_PAD_ENET1_TX_CLK__SAI1_RX_DATA0 0x1f + >; + }; +}; + +&iomuxc_lpsr { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpio_lpsr>; + + pinctrl_gpio_lpsr: gpio1-grp { + fsl,pins = < + MX7D_PAD_GPIO1_IO01__GPIO1_IO1 0x59 + MX7D_PAD_GPIO1_IO02__GPIO1_IO2 0x59 + MX7D_PAD_GPIO1_IO03__GPIO1_IO3 0x59 + >; + }; + + pinctrl_i2c1: i2c1-grp { + fsl,pins = < + MX7D_PAD_GPIO1_IO05__I2C1_SDA 0x4000007f + MX7D_PAD_GPIO1_IO04__I2C1_SCL 0x4000007f + >; + }; + + pinctrl_cd_usdhc1: usdhc1-cd-grp { + fsl,pins = < + MX7D_PAD_GPIO1_IO00__GPIO1_IO0 0x59 /* CD */ + >; + }; + + pinctrl_uart1_ctrl2: uart1-ctrl2-grp { + fsl,pins = < + MX7D_PAD_GPIO1_IO07__GPIO1_IO7 0x14 /* DSR */ + MX7D_PAD_GPIO1_IO06__GPIO1_IO6 0x14 /* RI */ + >; + }; +}; diff --git a/arch/arm/boot/dts/imx7d-cl-som-imx7.dts b/arch/arm/boot/dts/imx7d-cl-som-imx7.dts index 48634519d..58b09bf1b 100644 --- a/arch/arm/boot/dts/imx7d-cl-som-imx7.dts +++ b/arch/arm/boot/dts/imx7d-cl-som-imx7.dts @@ -12,7 +12,6 @@ /dts-v1/; -#include <dt-bindings/input/input.h> #include "imx7d.dtsi" / { diff --git a/arch/arm/boot/dts/imx7d-colibri-eval-v3.dts b/arch/arm/boot/dts/imx7d-colibri-eval-v3.dts new file mode 100644 index 000000000..bd01d2cc6 --- /dev/null +++ b/arch/arm/boot/dts/imx7d-colibri-eval-v3.dts @@ -0,0 +1,66 @@ +/* + * Copyright 2016 Toradex AG + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; +#include "imx7d-colibri.dtsi" +#include "imx7-colibri-eval-v3.dtsi" + +/ { + model = "Toradex Colibri iMX7D on Colibri Evaluation Board V3"; + compatible = "toradex,colibri-imx7d-eval-v3", "toradex,colibri-imx7d", + "fsl,imx7d"; + + reg_usb_otg2_vbus: regulator-usb-otg2-vbus { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbotg2_reg>; + regulator-name = "VCC_USB[1-4]"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio4 7 GPIO_ACTIVE_LOW>; + }; +}; + +&usbotg2 { + vbus-supply = <®_usb_otg2_vbus>; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/imx7d-colibri.dtsi b/arch/arm/boot/dts/imx7d-colibri.dtsi new file mode 100644 index 000000000..3c2cb502b --- /dev/null +++ b/arch/arm/boot/dts/imx7d-colibri.dtsi @@ -0,0 +1,54 @@ +/* + * Copyright 2016 Toradex AG + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +#include "imx7d.dtsi" +#include "imx7-colibri.dtsi" + +/ { + memory { + reg = <0x80000000 0x20000000>; + }; +}; + +&usbotg2 { + dr_mode = "host"; +}; diff --git a/arch/arm/boot/dts/imx7d-nitrogen7.dts b/arch/arm/boot/dts/imx7d-nitrogen7.dts index 1ce97800f..ce08f180f 100644 --- a/arch/arm/boot/dts/imx7d-nitrogen7.dts +++ b/arch/arm/boot/dts/imx7d-nitrogen7.dts @@ -42,7 +42,6 @@ /dts-v1/; -#include <dt-bindings/input/input.h> #include "imx7d.dtsi" / { @@ -392,7 +391,7 @@ pinctrl-0 = <&pinctrl_uart6>; assigned-clocks = <&clks IMX7D_UART6_ROOT_SRC>; assigned-clock-parents = <&clks IMX7D_PLL_SYS_MAIN_240M_CLK>; - fsl,uart-has-rtscts; + uart-has-rtscts; status = "okay"; }; diff --git a/arch/arm/boot/dts/imx7d-pinfunc.h b/arch/arm/boot/dts/imx7d-pinfunc.h index eeda78347..3f9f0d9c8 100644 --- a/arch/arm/boot/dts/imx7d-pinfunc.h +++ b/arch/arm/boot/dts/imx7d-pinfunc.h @@ -594,7 +594,7 @@ #define MX7D_PAD_UART2_RX_DATA__GPIO4_IO2 0x0130 0x03A0 0x0000 0x5 0x0 #define MX7D_PAD_UART2_RX_DATA__ENET2_MDIO 0x0130 0x03A0 0x0000 0x6 0x0 #define MX7D_PAD_UART2_TX_DATA__UART2_DCE_TX 0x0134 0x03A4 0x0000 0x0 0x0 -#define MX7D_PAD_UART2_TX_DATA__UART2_DTE_RX 0x0134 0x03A4 0x0000 0x0 0x0 +#define MX7D_PAD_UART2_TX_DATA__UART2_DTE_RX 0x0134 0x03A4 0x06FC 0x0 0x3 #define MX7D_PAD_UART2_TX_DATA__I2C2_SDA 0x0134 0x03A4 0x05E0 0x1 0x0 #define MX7D_PAD_UART2_TX_DATA__SAI3_RX_DATA0 0x0134 0x03A4 0x06C8 0x2 0x0 #define MX7D_PAD_UART2_TX_DATA__ECSPI1_RDY 0x0134 0x03A4 0x0000 0x3 0x0 diff --git a/arch/arm/boot/dts/imx7d-sdb.dts b/arch/arm/boot/dts/imx7d-sdb.dts index b267f79e3..2f33c463c 100644 --- a/arch/arm/boot/dts/imx7d-sdb.dts +++ b/arch/arm/boot/dts/imx7d-sdb.dts @@ -42,7 +42,6 @@ /dts-v1/; -#include <dt-bindings/input/input.h> #include "imx7d.dtsi" / { @@ -111,6 +110,32 @@ arm-supply = <&sw1a_reg>; }; +&ecspi3 { + fsl,spi-num-chipselects = <1>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ecspi3>; + cs-gpios = <&gpio5 9 GPIO_ACTIVE_HIGH>; + status = "okay"; + + tsc2046@0 { + compatible = "ti,tsc2046"; + reg = <0>; + spi-max-frequency = <1000000>; + pinctrl-names ="default"; + pinctrl-0 = <&pinctrl_tsc2046_pendown>; + interrupt-parent = <&gpio2>; + interrupts = <29 0>; + pendown-gpio = <&gpio2 29 GPIO_ACTIVE_HIGH>; + ti,x-min = /bits/ 16 <0>; + ti,x-max = /bits/ 16 <0>; + ti,y-min = /bits/ 16 <0>; + ti,y-max = /bits/ 16 <0>; + ti,pressure-max = /bits/ 16 <0>; + ti,x-plate-ohms = /bits/ 16 <400>; + wakeup-source; + }; +}; + &fec1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_enet1>; @@ -272,6 +297,44 @@ }; }; +&lcdif { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_lcdif>; + display = <&display0>; + status = "okay"; + + display0: display { + bits-per-pixel = <16>; + bus-width = <24>; + + display-timings { + native-mode = <&timing0>; + + timing0: timing0 { + clock-frequency = <9200000>; + hactive = <480>; + vactive = <272>; + hfront-porch = <8>; + hback-porch = <4>; + hsync-len = <41>; + vback-porch = <2>; + vfront-porch = <4>; + vsync-len = <10>; + hsync-active = <0>; + vsync-active = <0>; + de-active = <1>; + pixelclk-active = <0>; + }; + }; + }; +}; + +&pwm1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm1>; + status = "okay"; +}; + &uart1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart1>; @@ -314,11 +377,26 @@ status = "okay"; }; +&wdog1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_wdog>; + fsl,ext-reset-output; +}; + &iomuxc { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_hog>; imx7d-sdb { + pinctrl_ecspi3: ecspi3grp { + fsl,pins = < + MX7D_PAD_SAI2_TX_SYNC__ECSPI3_MISO 0x2 + MX7D_PAD_SAI2_TX_BCLK__ECSPI3_MOSI 0x2 + MX7D_PAD_SAI2_RX_DATA__ECSPI3_SCLK 0x2 + MX7D_PAD_SD2_CD_B__GPIO5_IO9 0x59 + >; + }; + pinctrl_enet1: enet1grp { fsl,pins = < MX7D_PAD_GPIO1_IO10__ENET1_MDIO 0x3 @@ -390,6 +468,52 @@ >; }; + pinctrl_lcdif: lcdifgrp { + fsl,pins = < + MX7D_PAD_LCD_DATA00__LCD_DATA0 0x79 + MX7D_PAD_LCD_DATA01__LCD_DATA1 0x79 + MX7D_PAD_LCD_DATA02__LCD_DATA2 0x79 + MX7D_PAD_LCD_DATA03__LCD_DATA3 0x79 + MX7D_PAD_LCD_DATA04__LCD_DATA4 0x79 + MX7D_PAD_LCD_DATA05__LCD_DATA5 0x79 + MX7D_PAD_LCD_DATA06__LCD_DATA6 0x79 + MX7D_PAD_LCD_DATA07__LCD_DATA7 0x79 + MX7D_PAD_LCD_DATA08__LCD_DATA8 0x79 + MX7D_PAD_LCD_DATA09__LCD_DATA9 0x79 + MX7D_PAD_LCD_DATA10__LCD_DATA10 0x79 + MX7D_PAD_LCD_DATA11__LCD_DATA11 0x79 + MX7D_PAD_LCD_DATA12__LCD_DATA12 0x79 + MX7D_PAD_LCD_DATA13__LCD_DATA13 0x79 + MX7D_PAD_LCD_DATA14__LCD_DATA14 0x79 + MX7D_PAD_LCD_DATA15__LCD_DATA15 0x79 + MX7D_PAD_LCD_DATA16__LCD_DATA16 0x79 + MX7D_PAD_LCD_DATA17__LCD_DATA17 0x79 + MX7D_PAD_LCD_DATA18__LCD_DATA18 0x79 + MX7D_PAD_LCD_DATA19__LCD_DATA19 0x79 + MX7D_PAD_LCD_DATA20__LCD_DATA20 0x79 + MX7D_PAD_LCD_DATA21__LCD_DATA21 0x79 + MX7D_PAD_LCD_DATA22__LCD_DATA22 0x79 + MX7D_PAD_LCD_DATA23__LCD_DATA23 0x79 + MX7D_PAD_LCD_CLK__LCD_CLK 0x79 + MX7D_PAD_LCD_ENABLE__LCD_ENABLE 0x79 + MX7D_PAD_LCD_VSYNC__LCD_VSYNC 0x79 + MX7D_PAD_LCD_HSYNC__LCD_HSYNC 0x79 + MX7D_PAD_LCD_RESET__LCD_RESET 0x79 + >; + }; + + pinctrl_pwm1: pwm1grp { + fsl,pins = < + MX7D_PAD_GPIO1_IO01__PWM1_OUT 0x110b0 + >; + }; + + pinctrl_tsc2046_pendown: tsc2046_pendown { + fsl,pins = < + MX7D_PAD_EPDC_BDR1__GPIO2_IO29 0x59 + >; + }; + pinctrl_uart1: uart1grp { fsl,pins = < MX7D_PAD_UART1_TX_DATA__UART1_DCE_TX 0x79 @@ -512,5 +636,10 @@ >; }; + pinctrl_wdog: wdoggrp { + fsl,pins = < + MX7D_PAD_GPIO1_IO00__WDOD1_WDOG_B 0x74 + >; + }; }; }; diff --git a/arch/arm/boot/dts/imx7d.dtsi b/arch/arm/boot/dts/imx7d.dtsi index 6b3faa298..51c13cbdf 100644 --- a/arch/arm/boot/dts/imx7d.dtsi +++ b/arch/arm/boot/dts/imx7d.dtsi @@ -1,5 +1,6 @@ /* * Copyright 2015 Freescale Semiconductor, Inc. + * Copyright 2016 Toradex AG * * This file is dual-licensed: you can use it either under the terms * of the GPL or the X11 license, at your option. Note that this dual @@ -40,54 +41,10 @@ * OTHER DEALINGS IN THE SOFTWARE. */ -#include <dt-bindings/clock/imx7d-clock.h> -#include <dt-bindings/gpio/gpio.h> -#include <dt-bindings/interrupt-controller/arm-gic.h> -#include "imx7d-pinfunc.h" -#include "skeleton.dtsi" +#include "imx7s.dtsi" / { - aliases { - gpio0 = &gpio1; - gpio1 = &gpio2; - gpio2 = &gpio3; - gpio3 = &gpio4; - gpio4 = &gpio5; - gpio5 = &gpio6; - gpio6 = &gpio7; - i2c0 = &i2c1; - i2c1 = &i2c2; - i2c2 = &i2c3; - i2c3 = &i2c4; - mmc0 = &usdhc1; - mmc1 = &usdhc2; - mmc2 = &usdhc3; - serial0 = &uart1; - serial1 = &uart2; - serial2 = &uart3; - serial3 = &uart4; - serial4 = &uart5; - serial5 = &uart6; - serial6 = &uart7; - }; - cpus { - #address-cells = <1>; - #size-cells = <0>; - - cpu0: cpu@0 { - compatible = "arm,cortex-a7"; - device_type = "cpu"; - reg = <0>; - operating-points = < - /* KHz uV */ - 996000 1075000 - 792000 975000 - >; - clock-latency = <61036>; /* two CLK32 periods */ - clocks = <&clks IMX7D_CLK_ARM>; - }; - cpu1: cpu@1 { compatible = "arm,cortex-a7"; device_type = "cpu"; @@ -95,221 +52,6 @@ }; }; - intc: interrupt-controller@31001000 { - compatible = "arm,cortex-a7-gic"; - #interrupt-cells = <3>; - interrupt-controller; - reg = <0x31001000 0x1000>, - <0x31002000 0x1000>, - <0x31004000 0x2000>, - <0x31006000 0x2000>; - }; - - ckil: clock-cki { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <32768>; - clock-output-names = "ckil"; - }; - - osc: clock-osc { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <24000000>; - clock-output-names = "osc"; - }; - - timer { - compatible = "arm,armv7-timer"; - interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, - <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, - <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, - <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>; - interrupt-parent = <&intc>; - }; - - etr@30086000 { - compatible = "arm,coresight-tmc", "arm,primecell"; - reg = <0x30086000 0x1000>; - clocks = <&clks IMX7D_MAIN_AXI_ROOT_CLK>; - clock-names = "apb_pclk"; - - port { - etr_in_port: endpoint { - slave-mode; - remote-endpoint = <&replicator_out_port1>; - }; - }; - }; - - tpiu@30087000 { - compatible = "arm,coresight-tpiu", "arm,primecell"; - reg = <0x30087000 0x1000>; - clocks = <&clks IMX7D_MAIN_AXI_ROOT_CLK>; - clock-names = "apb_pclk"; - - port { - tpiu_in_port: endpoint { - slave-mode; - remote-endpoint = <&replicator_out_port1>; - }; - }; - }; - - replicator { - /* - * non-configurable replicators don't show up on the - * AMBA bus. As such no need to add "arm,primecell" - */ - compatible = "arm,coresight-replicator"; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - /* replicator output ports */ - port@0 { - reg = <0>; - replicator_out_port0: endpoint { - remote-endpoint = <&tpiu_in_port>; - }; - }; - - port@1 { - reg = <1>; - replicator_out_port1: endpoint { - remote-endpoint = <&etr_in_port>; - }; - }; - - /* replicator input port */ - port@2 { - reg = <0>; - replicator_in_port0: endpoint { - slave-mode; - remote-endpoint = <&etf_out_port>; - }; - }; - }; - }; - - etf@30084000 { - compatible = "arm,coresight-tmc", "arm,primecell"; - reg = <0x30084000 0x1000>; - clocks = <&clks IMX7D_MAIN_AXI_ROOT_CLK>; - clock-names = "apb_pclk"; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - etf_in_port: endpoint { - slave-mode; - remote-endpoint = <&hugo_funnel_out_port0>; - }; - }; - - port@1 { - reg = <0>; - etf_out_port: endpoint { - remote-endpoint = <&replicator_in_port0>; - }; - }; - }; - }; - - funnel@30083000 { - compatible = "arm,coresight-funnel", "arm,primecell"; - reg = <0x30083000 0x1000>; - clocks = <&clks IMX7D_MAIN_AXI_ROOT_CLK>; - clock-names = "apb_pclk"; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - /* funnel input ports */ - port@0 { - reg = <0>; - hugo_funnel_in_port0: endpoint { - slave-mode; - remote-endpoint = <&ca_funnel_out_port0>; - }; - }; - - port@1 { - reg = <1>; - hugo_funnel_in_port1: endpoint { - slave-mode; /* M4 input */ - }; - }; - - port@2 { - reg = <0>; - hugo_funnel_out_port0: endpoint { - remote-endpoint = <&etf_in_port>; - }; - }; - - /* the other input ports are not connect to anything */ - }; - }; - - funnel@30041000 { - compatible = "arm,coresight-funnel", "arm,primecell"; - reg = <0x30041000 0x1000>; - clocks = <&clks IMX7D_MAIN_AXI_ROOT_CLK>; - clock-names = "apb_pclk"; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - /* funnel input ports */ - port@0 { - reg = <0>; - ca_funnel_in_port0: endpoint { - slave-mode; - remote-endpoint = <&etm0_out_port>; - }; - }; - - port@1 { - reg = <1>; - ca_funnel_in_port1: endpoint { - slave-mode; - remote-endpoint = <&etm1_out_port>; - }; - }; - - /* funnel output port */ - port@2 { - reg = <0>; - ca_funnel_out_port0: endpoint { - remote-endpoint = <&hugo_funnel_in_port0>; - }; - }; - - /* the other input ports are not connect to anything */ - }; - }; - - etm@3007c000 { - compatible = "arm,coresight-etm3x", "arm,primecell"; - reg = <0x3007c000 0x1000>; - cpu = <&cpu0>; - clocks = <&clks IMX7D_MAIN_AXI_ROOT_CLK>; - clock-names = "apb_pclk"; - - port { - etm0_out_port: endpoint { - remote-endpoint = <&ca_funnel_in_port0>; - }; - }; - }; - etm@3007d000 { compatible = "arm,coresight-etm3x", "arm,primecell"; reg = <0x3007d000 0x1000>; @@ -330,626 +72,57 @@ }; }; }; +}; - soc { - #address-cells = <1>; - #size-cells = <1>; - compatible = "simple-bus"; - interrupt-parent = <&intc>; - ranges; - - aips1: aips-bus@30000000 { - compatible = "fsl,aips-bus", "simple-bus"; - #address-cells = <1>; - #size-cells = <1>; - reg = <0x30000000 0x400000>; - ranges; - - gpio1: gpio@30200000 { - compatible = "fsl,imx7d-gpio", "fsl,imx35-gpio"; - reg = <0x30200000 0x10000>; - interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>, /* GPIO1_INT15_0 */ - <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>; /* GPIO1_INT31_16 */ - gpio-controller; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - }; - - gpio2: gpio@30210000 { - compatible = "fsl,imx7d-gpio", "fsl,imx35-gpio"; - reg = <0x30210000 0x10000>; - interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>; - gpio-controller; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - }; - - gpio3: gpio@30220000 { - compatible = "fsl,imx7d-gpio", "fsl,imx35-gpio"; - reg = <0x30220000 0x10000>; - interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>; - gpio-controller; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - }; - - gpio4: gpio@30230000 { - compatible = "fsl,imx7d-gpio", "fsl,imx35-gpio"; - reg = <0x30230000 0x10000>; - interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>; - gpio-controller; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - }; - - gpio5: gpio@30240000 { - compatible = "fsl,imx7d-gpio", "fsl,imx35-gpio"; - reg = <0x30240000 0x10000>; - interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>; - gpio-controller; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - }; - - gpio6: gpio@30250000 { - compatible = "fsl,imx7d-gpio", "fsl,imx35-gpio"; - reg = <0x30250000 0x10000>; - interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>; - gpio-controller; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - }; - - gpio7: gpio@30260000 { - compatible = "fsl,imx7d-gpio", "fsl,imx35-gpio"; - reg = <0x30260000 0x10000>; - interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>; - gpio-controller; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - }; - - wdog1: wdog@30280000 { - compatible = "fsl,imx7d-wdt", "fsl,imx21-wdt"; - reg = <0x30280000 0x10000>; - interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clks IMX7D_WDOG1_ROOT_CLK>; - }; - - wdog2: wdog@30290000 { - compatible = "fsl,imx7d-wdt", "fsl,imx21-wdt"; - reg = <0x30290000 0x10000>; - interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clks IMX7D_WDOG2_ROOT_CLK>; - status = "disabled"; - }; - - wdog3: wdog@302a0000 { - compatible = "fsl,imx7d-wdt", "fsl,imx21-wdt"; - reg = <0x302a0000 0x10000>; - interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clks IMX7D_WDOG3_ROOT_CLK>; - status = "disabled"; - }; - - wdog4: wdog@302b0000 { - compatible = "fsl,imx7d-wdt", "fsl,imx21-wdt"; - reg = <0x302b0000 0x10000>; - interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clks IMX7D_WDOG4_ROOT_CLK>; - status = "disabled"; - }; - - iomuxc_lpsr: iomuxc-lpsr@302c0000 { - compatible = "fsl,imx7d-iomuxc-lpsr"; - reg = <0x302c0000 0x10000>; - fsl,input-sel = <&iomuxc>; - }; - - gpt1: gpt@302d0000 { - compatible = "fsl,imx7d-gpt", "fsl,imx6sx-gpt"; - reg = <0x302d0000 0x10000>; - interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clks IMX7D_CLK_DUMMY>, - <&clks IMX7D_GPT1_ROOT_CLK>; - clock-names = "ipg", "per"; - }; - - gpt2: gpt@302e0000 { - compatible = "fsl,imx7d-gpt", "fsl,imx6sx-gpt"; - reg = <0x302e0000 0x10000>; - interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clks IMX7D_CLK_DUMMY>, - <&clks IMX7D_GPT2_ROOT_CLK>; - clock-names = "ipg", "per"; - status = "disabled"; - }; - - gpt3: gpt@302f0000 { - compatible = "fsl,imx7d-gpt", "fsl,imx6sx-gpt"; - reg = <0x302f0000 0x10000>; - interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clks IMX7D_CLK_DUMMY>, - <&clks IMX7D_GPT3_ROOT_CLK>; - clock-names = "ipg", "per"; - status = "disabled"; - }; - - gpt4: gpt@30300000 { - compatible = "fsl,imx7d-gpt", "fsl,imx6sx-gpt"; - reg = <0x30300000 0x10000>; - interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clks IMX7D_CLK_DUMMY>, - <&clks IMX7D_GPT4_ROOT_CLK>; - clock-names = "ipg", "per"; - status = "disabled"; - }; - - iomuxc: iomuxc@30330000 { - compatible = "fsl,imx7d-iomuxc"; - reg = <0x30330000 0x10000>; - }; - - gpr: iomuxc-gpr@30340000 { - compatible = "fsl,imx7d-iomuxc-gpr", "syscon"; - reg = <0x30340000 0x10000>; - }; - - ocotp: ocotp-ctrl@30350000 { - compatible = "syscon"; - reg = <0x30350000 0x10000>; - clocks = <&clks IMX7D_CLK_DUMMY>; - status = "disabled"; - }; - - anatop: anatop@30360000 { - compatible = "fsl,imx7d-anatop", "fsl,imx6q-anatop", - "syscon", "simple-bus"; - reg = <0x30360000 0x10000>; - interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>; - - reg_1p0d: regulator-vdd1p0d@210 { - compatible = "fsl,anatop-regulator"; - regulator-name = "vdd1p0d"; - regulator-min-microvolt = <800000>; - regulator-max-microvolt = <1200000>; - anatop-reg-offset = <0x210>; - anatop-vol-bit-shift = <8>; - anatop-vol-bit-width = <5>; - anatop-min-bit-val = <8>; - anatop-min-voltage = <800000>; - anatop-max-voltage = <1200000>; - anatop-enable-bit = <31>; - }; - }; - - snvs: snvs@30370000 { - compatible = "fsl,sec-v4.0-mon", "syscon", "simple-mfd"; - reg = <0x30370000 0x10000>; - - snvs_rtc: snvs-rtc-lp { - compatible = "fsl,sec-v4.0-mon-rtc-lp"; - regmap = <&snvs>; - offset = <0x34>; - interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>; - }; - - snvs_poweroff: snvs-poweroff { - compatible = "syscon-poweroff"; - regmap = <&snvs>; - offset = <0x38>; - mask = <0x60>; - }; - - snvs_pwrkey: snvs-powerkey { - compatible = "fsl,sec-v4.0-pwrkey"; - regmap = <&snvs>; - interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>; - linux,keycode = <KEY_POWER>; - wakeup-source; - }; - }; - - clks: ccm@30380000 { - compatible = "fsl,imx7d-ccm"; - reg = <0x30380000 0x10000>; - interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>; - #clock-cells = <1>; - clocks = <&ckil>, <&osc>; - clock-names = "ckil", "osc"; - }; - - src: src@30390000 { - compatible = "fsl,imx7d-src", "fsl,imx51-src", "syscon"; - reg = <0x30390000 0x10000>; - interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>; - #reset-cells = <1>; - }; - }; - - aips2: aips-bus@30400000 { - compatible = "fsl,aips-bus", "simple-bus"; - #address-cells = <1>; - #size-cells = <1>; - reg = <0x30400000 0x400000>; - ranges; - - adc1: adc@30610000 { - compatible = "fsl,imx7d-adc"; - reg = <0x30610000 0x10000>; - interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clks IMX7D_ADC_ROOT_CLK>; - clock-names = "adc"; - status = "disabled"; - }; - - adc2: adc@30620000 { - compatible = "fsl,imx7d-adc"; - reg = <0x30620000 0x10000>; - interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clks IMX7D_ADC_ROOT_CLK>; - clock-names = "adc"; - status = "disabled"; - }; - - pwm1: pwm@30660000 { - compatible = "fsl,imx7d-pwm", "fsl,imx27-pwm"; - reg = <0x30660000 0x10000>; - interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clks IMX7D_PWM1_ROOT_CLK>, - <&clks IMX7D_PWM1_ROOT_CLK>; - clock-names = "ipg", "per"; - #pwm-cells = <2>; - status = "disabled"; - }; - - pwm2: pwm@30670000 { - compatible = "fsl,imx7d-pwm", "fsl,imx27-pwm"; - reg = <0x30670000 0x10000>; - interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clks IMX7D_PWM2_ROOT_CLK>, - <&clks IMX7D_PWM2_ROOT_CLK>; - clock-names = "ipg", "per"; - #pwm-cells = <2>; - status = "disabled"; - }; - - pwm3: pwm@30680000 { - compatible = "fsl,imx7d-pwm", "fsl,imx27-pwm"; - reg = <0x30680000 0x10000>; - interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clks IMX7D_PWM3_ROOT_CLK>, - <&clks IMX7D_PWM3_ROOT_CLK>; - clock-names = "ipg", "per"; - #pwm-cells = <2>; - status = "disabled"; - }; - - pwm4: pwm@30690000 { - compatible = "fsl,imx7d-pwm", "fsl,imx27-pwm"; - reg = <0x30690000 0x10000>; - interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clks IMX7D_PWM4_ROOT_CLK>, - <&clks IMX7D_PWM4_ROOT_CLK>; - clock-names = "ipg", "per"; - #pwm-cells = <2>; - status = "disabled"; - }; - - lcdif: lcdif@30730000 { - compatible = "fsl,imx7d-lcdif", "fsl,imx28-lcdif"; - reg = <0x30730000 0x10000>; - interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clks IMX7D_LCDIF_PIXEL_ROOT_CLK>, - <&clks IMX7D_CLK_DUMMY>, - <&clks IMX7D_CLK_DUMMY>; - clock-names = "pix", "axi", "disp_axi"; - status = "disabled"; - }; - }; - - aips3: aips-bus@30800000 { - compatible = "fsl,aips-bus", "simple-bus"; - #address-cells = <1>; - #size-cells = <1>; - reg = <0x30800000 0x400000>; - ranges; - - uart1: serial@30860000 { - compatible = "fsl,imx7d-uart", - "fsl,imx6q-uart"; - reg = <0x30860000 0x10000>; - interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clks IMX7D_UART1_ROOT_CLK>, - <&clks IMX7D_UART1_ROOT_CLK>; - clock-names = "ipg", "per"; - status = "disabled"; - }; - - uart2: serial@30890000 { - compatible = "fsl,imx7d-uart", - "fsl,imx6q-uart"; - reg = <0x30890000 0x10000>; - interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clks IMX7D_UART2_ROOT_CLK>, - <&clks IMX7D_UART2_ROOT_CLK>; - clock-names = "ipg", "per"; - status = "disabled"; - }; - - uart3: serial@30880000 { - compatible = "fsl,imx7d-uart", - "fsl,imx6q-uart"; - reg = <0x30880000 0x10000>; - interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clks IMX7D_UART3_ROOT_CLK>, - <&clks IMX7D_UART3_ROOT_CLK>; - clock-names = "ipg", "per"; - status = "disabled"; - }; - - flexcan1: can@30a00000 { - compatible = "fsl,imx7d-flexcan", "fsl,imx6q-flexcan"; - reg = <0x30a00000 0x10000>; - interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clks IMX7D_CLK_DUMMY>, - <&clks IMX7D_CAN1_ROOT_CLK>; - clock-names = "ipg", "per"; - status = "disabled"; - }; - - flexcan2: can@30a10000 { - compatible = "fsl,imx7d-flexcan", "fsl,imx6q-flexcan"; - reg = <0x30a10000 0x10000>; - interrupts = <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clks IMX7D_CLK_DUMMY>, - <&clks IMX7D_CAN2_ROOT_CLK>; - clock-names = "ipg", "per"; - status = "disabled"; - }; - - i2c1: i2c@30a20000 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "fsl,imx7d-i2c", "fsl,imx21-i2c"; - reg = <0x30a20000 0x10000>; - interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clks IMX7D_I2C1_ROOT_CLK>; - status = "disabled"; - }; - - i2c2: i2c@30a30000 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "fsl,imx7d-i2c", "fsl,imx21-i2c"; - reg = <0x30a30000 0x10000>; - interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clks IMX7D_I2C2_ROOT_CLK>; - status = "disabled"; - }; - - i2c3: i2c@30a40000 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "fsl,imx7d-i2c", "fsl,imx21-i2c"; - reg = <0x30a40000 0x10000>; - interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clks IMX7D_I2C3_ROOT_CLK>; - status = "disabled"; - }; - - i2c4: i2c@30a50000 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "fsl,imx7d-i2c", "fsl,imx21-i2c"; - reg = <0x30a50000 0x10000>; - interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clks IMX7D_I2C4_ROOT_CLK>; - status = "disabled"; - }; - - uart4: serial@30a60000 { - compatible = "fsl,imx7d-uart", - "fsl,imx6q-uart"; - reg = <0x30a60000 0x10000>; - interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clks IMX7D_UART4_ROOT_CLK>, - <&clks IMX7D_UART4_ROOT_CLK>; - clock-names = "ipg", "per"; - status = "disabled"; - }; - - uart5: serial@30a70000 { - compatible = "fsl,imx7d-uart", - "fsl,imx6q-uart"; - reg = <0x30a70000 0x10000>; - interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clks IMX7D_UART5_ROOT_CLK>, - <&clks IMX7D_UART5_ROOT_CLK>; - clock-names = "ipg", "per"; - status = "disabled"; - }; - - uart6: serial@30a80000 { - compatible = "fsl,imx7d-uart", - "fsl,imx6q-uart"; - reg = <0x30a80000 0x10000>; - interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clks IMX7D_UART6_ROOT_CLK>, - <&clks IMX7D_UART6_ROOT_CLK>; - clock-names = "ipg", "per"; - status = "disabled"; - }; - - uart7: serial@30a90000 { - compatible = "fsl,imx7d-uart", - "fsl,imx6q-uart"; - reg = <0x30a90000 0x10000>; - interrupts = <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clks IMX7D_UART7_ROOT_CLK>, - <&clks IMX7D_UART7_ROOT_CLK>; - clock-names = "ipg", "per"; - status = "disabled"; - }; - - usbotg1: usb@30b10000 { - compatible = "fsl,imx7d-usb", "fsl,imx27-usb"; - reg = <0x30b10000 0x200>; - interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clks IMX7D_USB_CTRL_CLK>; - fsl,usbphy = <&usbphynop1>; - fsl,usbmisc = <&usbmisc1 0>; - phy-clkgate-delay-us = <400>; - status = "disabled"; - }; - - usbotg2: usb@30b20000 { - compatible = "fsl,imx7d-usb", "fsl,imx27-usb"; - reg = <0x30b20000 0x200>; - interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clks IMX7D_USB_CTRL_CLK>; - fsl,usbphy = <&usbphynop2>; - fsl,usbmisc = <&usbmisc2 0>; - phy-clkgate-delay-us = <400>; - status = "disabled"; - }; - - usbh: usb@30b30000 { - compatible = "fsl,imx7d-usb", "fsl,imx27-usb"; - reg = <0x30b30000 0x200>; - interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clks IMX7D_USB_CTRL_CLK>; - fsl,usbphy = <&usbphynop3>; - fsl,usbmisc = <&usbmisc3 0>; - phy_type = "hsic"; - dr_mode = "host"; - phy-clkgate-delay-us = <400>; - status = "disabled"; - }; - - usbmisc1: usbmisc@30b10200 { - #index-cells = <1>; - compatible = "fsl,imx7d-usbmisc", "fsl,imx6q-usbmisc"; - reg = <0x30b10200 0x200>; - }; - - usbmisc2: usbmisc@30b20200 { - #index-cells = <1>; - compatible = "fsl,imx7d-usbmisc", "fsl,imx6q-usbmisc"; - reg = <0x30b20200 0x200>; - }; - - usbmisc3: usbmisc@30b30200 { - #index-cells = <1>; - compatible = "fsl,imx7d-usbmisc", "fsl,imx6q-usbmisc"; - reg = <0x30b30200 0x200>; - }; - - usbphynop1: usbphynop1 { - compatible = "usb-nop-xceiv"; - clocks = <&clks IMX7D_USB_PHY1_CLK>; - clock-names = "main_clk"; - }; - - usbphynop2: usbphynop2 { - compatible = "usb-nop-xceiv"; - clocks = <&clks IMX7D_USB_PHY2_CLK>; - clock-names = "main_clk"; - }; - - usbphynop3: usbphynop3 { - compatible = "usb-nop-xceiv"; - clocks = <&clks IMX7D_USB_HSIC_ROOT_CLK>; - clock-names = "main_clk"; - }; - - usdhc1: usdhc@30b40000 { - compatible = "fsl,imx7d-usdhc", "fsl,imx6sl-usdhc"; - reg = <0x30b40000 0x10000>; - interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clks IMX7D_CLK_DUMMY>, - <&clks IMX7D_CLK_DUMMY>, - <&clks IMX7D_USDHC1_ROOT_CLK>; - clock-names = "ipg", "ahb", "per"; - bus-width = <4>; - status = "disabled"; - }; +&aips3 { + usbotg2: usb@30b20000 { + compatible = "fsl,imx7d-usb", "fsl,imx27-usb"; + reg = <0x30b20000 0x200>; + interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX7D_USB_CTRL_CLK>; + fsl,usbphy = <&usbphynop2>; + fsl,usbmisc = <&usbmisc2 0>; + phy-clkgate-delay-us = <400>; + status = "disabled"; + }; - usdhc2: usdhc@30b50000 { - compatible = "fsl,imx7d-usdhc", "fsl,imx6sl-usdhc"; - reg = <0x30b50000 0x10000>; - interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clks IMX7D_CLK_DUMMY>, - <&clks IMX7D_CLK_DUMMY>, - <&clks IMX7D_USDHC2_ROOT_CLK>; - clock-names = "ipg", "ahb", "per"; - bus-width = <4>; - status = "disabled"; - }; + usbmisc2: usbmisc@30b20200 { + #index-cells = <1>; + compatible = "fsl,imx7d-usbmisc", "fsl,imx6q-usbmisc"; + reg = <0x30b20200 0x200>; + }; - usdhc3: usdhc@30b60000 { - compatible = "fsl,imx7d-usdhc", "fsl,imx6sl-usdhc"; - reg = <0x30b60000 0x10000>; - interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clks IMX7D_CLK_DUMMY>, - <&clks IMX7D_CLK_DUMMY>, - <&clks IMX7D_USDHC3_ROOT_CLK>; - clock-names = "ipg", "ahb", "per"; - bus-width = <4>; - status = "disabled"; - }; + usbphynop2: usbphynop2 { + compatible = "usb-nop-xceiv"; + clocks = <&clks IMX7D_USB_PHY2_CLK>; + clock-names = "main_clk"; + }; - fec1: ethernet@30be0000 { - compatible = "fsl,imx7d-fec", "fsl,imx6sx-fec"; - reg = <0x30be0000 0x10000>; - interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clks IMX7D_ENET_AXI_ROOT_CLK>, - <&clks IMX7D_ENET_AXI_ROOT_CLK>, - <&clks IMX7D_ENET1_TIME_ROOT_CLK>, - <&clks IMX7D_PLL_ENET_MAIN_125M_CLK>, - <&clks IMX7D_ENET_PHY_REF_ROOT_CLK>; - clock-names = "ipg", "ahb", "ptp", - "enet_clk_ref", "enet_out"; - fsl,num-tx-queues=<3>; - fsl,num-rx-queues=<3>; - status = "disabled"; - }; + fec2: ethernet@30bf0000 { + compatible = "fsl,imx7d-fec", "fsl,imx6sx-fec"; + reg = <0x30bf0000 0x10000>; + interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX7D_ENET_AXI_ROOT_CLK>, + <&clks IMX7D_ENET_AXI_ROOT_CLK>, + <&clks IMX7D_ENET2_TIME_ROOT_CLK>, + <&clks IMX7D_PLL_ENET_MAIN_125M_CLK>, + <&clks IMX7D_ENET_PHY_REF_ROOT_CLK>; + clock-names = "ipg", "ahb", "ptp", + "enet_clk_ref", "enet_out"; + fsl,num-tx-queues=<3>; + fsl,num-rx-queues=<3>; + status = "disabled"; + }; +}; - fec2: ethernet@30bf0000 { - compatible = "fsl,imx7d-fec", "fsl,imx6sx-fec"; - reg = <0x30bf0000 0x10000>; - interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clks IMX7D_ENET_AXI_ROOT_CLK>, - <&clks IMX7D_ENET_AXI_ROOT_CLK>, - <&clks IMX7D_ENET2_TIME_ROOT_CLK>, - <&clks IMX7D_PLL_ENET_MAIN_125M_CLK>, - <&clks IMX7D_ENET_PHY_REF_ROOT_CLK>; - clock-names = "ipg", "ahb", "ptp", - "enet_clk_ref", "enet_out"; - fsl,num-tx-queues=<3>; - fsl,num-rx-queues=<3>; - status = "disabled"; - }; +&ca_funnel_ports { + port@1 { + reg = <1>; + ca_funnel_in_port1: endpoint { + slave-mode; + remote-endpoint = <&etm1_out_port>; }; }; }; diff --git a/arch/arm/boot/dts/imx7s-colibri-eval-v3.dts b/arch/arm/boot/dts/imx7s-colibri-eval-v3.dts new file mode 100644 index 000000000..bd2a49c1a --- /dev/null +++ b/arch/arm/boot/dts/imx7s-colibri-eval-v3.dts @@ -0,0 +1,51 @@ +/* + * Copyright 2016 Toradex AG + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; +#include "imx7s-colibri.dtsi" +#include "imx7-colibri-eval-v3.dtsi" + +/ { + model = "Toradex Colibri iMX7S on Colibri Evaluation Board V3"; + compatible = "toradex,colibri-imx7s-eval-v3", "toradex,colibri-imx7s", + "fsl,imx7s"; +}; diff --git a/arch/arm/boot/dts/imx7s-colibri.dtsi b/arch/arm/boot/dts/imx7s-colibri.dtsi new file mode 100644 index 000000000..b81013455 --- /dev/null +++ b/arch/arm/boot/dts/imx7s-colibri.dtsi @@ -0,0 +1,50 @@ +/* + * Copyright 2016 Toradex AG + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +#include "imx7s.dtsi" +#include "imx7-colibri.dtsi" + +/ { + memory { + reg = <0x80000000 0x10000000>; + }; +}; diff --git a/arch/arm/boot/dts/imx7s.dtsi b/arch/arm/boot/dts/imx7s.dtsi new file mode 100644 index 000000000..1e90bdbe3 --- /dev/null +++ b/arch/arm/boot/dts/imx7s.dtsi @@ -0,0 +1,933 @@ +/* + * Copyright 2015 Freescale Semiconductor, Inc. + * Copyright 2016 Toradex AG + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +#include <dt-bindings/clock/imx7d-clock.h> +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> +#include <dt-bindings/interrupt-controller/arm-gic.h> +#include "imx7d-pinfunc.h" +#include "skeleton.dtsi" + +/ { + aliases { + gpio0 = &gpio1; + gpio1 = &gpio2; + gpio2 = &gpio3; + gpio3 = &gpio4; + gpio4 = &gpio5; + gpio5 = &gpio6; + gpio6 = &gpio7; + i2c0 = &i2c1; + i2c1 = &i2c2; + i2c2 = &i2c3; + i2c3 = &i2c4; + mmc0 = &usdhc1; + mmc1 = &usdhc2; + mmc2 = &usdhc3; + serial0 = &uart1; + serial1 = &uart2; + serial2 = &uart3; + serial3 = &uart4; + serial4 = &uart5; + serial5 = &uart6; + serial6 = &uart7; + spi0 = &ecspi1; + spi1 = &ecspi2; + spi2 = &ecspi3; + spi3 = &ecspi4; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu0: cpu@0 { + compatible = "arm,cortex-a7"; + device_type = "cpu"; + reg = <0>; + operating-points = < + /* KHz uV */ + 996000 1075000 + 792000 975000 + >; + clock-latency = <61036>; /* two CLK32 periods */ + clocks = <&clks IMX7D_CLK_ARM>; + }; + }; + + intc: interrupt-controller@31001000 { + compatible = "arm,cortex-a7-gic"; + #interrupt-cells = <3>; + interrupt-controller; + reg = <0x31001000 0x1000>, + <0x31002000 0x1000>, + <0x31004000 0x2000>, + <0x31006000 0x2000>; + }; + + ckil: clock-cki { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <32768>; + clock-output-names = "ckil"; + }; + + osc: clock-osc { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <24000000>; + clock-output-names = "osc"; + }; + + timer { + compatible = "arm,armv7-timer"; + interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>; + interrupt-parent = <&intc>; + }; + + etr@30086000 { + compatible = "arm,coresight-tmc", "arm,primecell"; + reg = <0x30086000 0x1000>; + clocks = <&clks IMX7D_MAIN_AXI_ROOT_CLK>; + clock-names = "apb_pclk"; + + port { + etr_in_port: endpoint { + slave-mode; + remote-endpoint = <&replicator_out_port1>; + }; + }; + }; + + tpiu@30087000 { + compatible = "arm,coresight-tpiu", "arm,primecell"; + reg = <0x30087000 0x1000>; + clocks = <&clks IMX7D_MAIN_AXI_ROOT_CLK>; + clock-names = "apb_pclk"; + + port { + tpiu_in_port: endpoint { + slave-mode; + remote-endpoint = <&replicator_out_port1>; + }; + }; + }; + + replicator { + /* + * non-configurable replicators don't show up on the + * AMBA bus. As such no need to add "arm,primecell" + */ + compatible = "arm,coresight-replicator"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + /* replicator output ports */ + port@0 { + reg = <0>; + replicator_out_port0: endpoint { + remote-endpoint = <&tpiu_in_port>; + }; + }; + + port@1 { + reg = <1>; + replicator_out_port1: endpoint { + remote-endpoint = <&etr_in_port>; + }; + }; + + /* replicator input port */ + port@2 { + reg = <0>; + replicator_in_port0: endpoint { + slave-mode; + remote-endpoint = <&etf_out_port>; + }; + }; + }; + }; + + etf@30084000 { + compatible = "arm,coresight-tmc", "arm,primecell"; + reg = <0x30084000 0x1000>; + clocks = <&clks IMX7D_MAIN_AXI_ROOT_CLK>; + clock-names = "apb_pclk"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + etf_in_port: endpoint { + slave-mode; + remote-endpoint = <&hugo_funnel_out_port0>; + }; + }; + + port@1 { + reg = <0>; + etf_out_port: endpoint { + remote-endpoint = <&replicator_in_port0>; + }; + }; + }; + }; + + funnel@30083000 { + compatible = "arm,coresight-funnel", "arm,primecell"; + reg = <0x30083000 0x1000>; + clocks = <&clks IMX7D_MAIN_AXI_ROOT_CLK>; + clock-names = "apb_pclk"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + /* funnel input ports */ + port@0 { + reg = <0>; + hugo_funnel_in_port0: endpoint { + slave-mode; + remote-endpoint = <&ca_funnel_out_port0>; + }; + }; + + port@1 { + reg = <1>; + hugo_funnel_in_port1: endpoint { + slave-mode; /* M4 input */ + }; + }; + + port@2 { + reg = <0>; + hugo_funnel_out_port0: endpoint { + remote-endpoint = <&etf_in_port>; + }; + }; + + /* the other input ports are not connect to anything */ + }; + }; + + funnel@30041000 { + compatible = "arm,coresight-funnel", "arm,primecell"; + reg = <0x30041000 0x1000>; + clocks = <&clks IMX7D_MAIN_AXI_ROOT_CLK>; + clock-names = "apb_pclk"; + + ca_funnel_ports: ports { + #address-cells = <1>; + #size-cells = <0>; + + /* funnel input ports */ + port@0 { + reg = <0>; + ca_funnel_in_port0: endpoint { + slave-mode; + remote-endpoint = <&etm0_out_port>; + }; + }; + + /* funnel output port */ + port@2 { + reg = <0>; + ca_funnel_out_port0: endpoint { + remote-endpoint = <&hugo_funnel_in_port0>; + }; + }; + + /* the other input ports are not connect to anything */ + }; + }; + + etm@3007c000 { + compatible = "arm,coresight-etm3x", "arm,primecell"; + reg = <0x3007c000 0x1000>; + cpu = <&cpu0>; + clocks = <&clks IMX7D_MAIN_AXI_ROOT_CLK>; + clock-names = "apb_pclk"; + + port { + etm0_out_port: endpoint { + remote-endpoint = <&ca_funnel_in_port0>; + }; + }; + }; + + soc { + #address-cells = <1>; + #size-cells = <1>; + compatible = "simple-bus"; + interrupt-parent = <&intc>; + ranges; + + aips1: aips-bus@30000000 { + compatible = "fsl,aips-bus", "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x30000000 0x400000>; + ranges; + + gpio1: gpio@30200000 { + compatible = "fsl,imx7d-gpio", "fsl,imx35-gpio"; + reg = <0x30200000 0x10000>; + interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>, /* GPIO1_INT15_0 */ + <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>; /* GPIO1_INT31_16 */ + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpio2: gpio@30210000 { + compatible = "fsl,imx7d-gpio", "fsl,imx35-gpio"; + reg = <0x30210000 0x10000>; + interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpio3: gpio@30220000 { + compatible = "fsl,imx7d-gpio", "fsl,imx35-gpio"; + reg = <0x30220000 0x10000>; + interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpio4: gpio@30230000 { + compatible = "fsl,imx7d-gpio", "fsl,imx35-gpio"; + reg = <0x30230000 0x10000>; + interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpio5: gpio@30240000 { + compatible = "fsl,imx7d-gpio", "fsl,imx35-gpio"; + reg = <0x30240000 0x10000>; + interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpio6: gpio@30250000 { + compatible = "fsl,imx7d-gpio", "fsl,imx35-gpio"; + reg = <0x30250000 0x10000>; + interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpio7: gpio@30260000 { + compatible = "fsl,imx7d-gpio", "fsl,imx35-gpio"; + reg = <0x30260000 0x10000>; + interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + wdog1: wdog@30280000 { + compatible = "fsl,imx7d-wdt", "fsl,imx21-wdt"; + reg = <0x30280000 0x10000>; + interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX7D_WDOG1_ROOT_CLK>; + }; + + wdog2: wdog@30290000 { + compatible = "fsl,imx7d-wdt", "fsl,imx21-wdt"; + reg = <0x30290000 0x10000>; + interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX7D_WDOG2_ROOT_CLK>; + status = "disabled"; + }; + + wdog3: wdog@302a0000 { + compatible = "fsl,imx7d-wdt", "fsl,imx21-wdt"; + reg = <0x302a0000 0x10000>; + interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX7D_WDOG3_ROOT_CLK>; + status = "disabled"; + }; + + wdog4: wdog@302b0000 { + compatible = "fsl,imx7d-wdt", "fsl,imx21-wdt"; + reg = <0x302b0000 0x10000>; + interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX7D_WDOG4_ROOT_CLK>; + status = "disabled"; + }; + + iomuxc_lpsr: iomuxc-lpsr@302c0000 { + compatible = "fsl,imx7d-iomuxc-lpsr"; + reg = <0x302c0000 0x10000>; + fsl,input-sel = <&iomuxc>; + }; + + gpt1: gpt@302d0000 { + compatible = "fsl,imx7d-gpt", "fsl,imx6sx-gpt"; + reg = <0x302d0000 0x10000>; + interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX7D_CLK_DUMMY>, + <&clks IMX7D_GPT1_ROOT_CLK>; + clock-names = "ipg", "per"; + }; + + gpt2: gpt@302e0000 { + compatible = "fsl,imx7d-gpt", "fsl,imx6sx-gpt"; + reg = <0x302e0000 0x10000>; + interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX7D_CLK_DUMMY>, + <&clks IMX7D_GPT2_ROOT_CLK>; + clock-names = "ipg", "per"; + status = "disabled"; + }; + + gpt3: gpt@302f0000 { + compatible = "fsl,imx7d-gpt", "fsl,imx6sx-gpt"; + reg = <0x302f0000 0x10000>; + interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX7D_CLK_DUMMY>, + <&clks IMX7D_GPT3_ROOT_CLK>; + clock-names = "ipg", "per"; + status = "disabled"; + }; + + gpt4: gpt@30300000 { + compatible = "fsl,imx7d-gpt", "fsl,imx6sx-gpt"; + reg = <0x30300000 0x10000>; + interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX7D_CLK_DUMMY>, + <&clks IMX7D_GPT4_ROOT_CLK>; + clock-names = "ipg", "per"; + status = "disabled"; + }; + + iomuxc: iomuxc@30330000 { + compatible = "fsl,imx7d-iomuxc"; + reg = <0x30330000 0x10000>; + }; + + gpr: iomuxc-gpr@30340000 { + compatible = "fsl,imx7d-iomuxc-gpr", "syscon"; + reg = <0x30340000 0x10000>; + }; + + ocotp: ocotp-ctrl@30350000 { + compatible = "syscon"; + reg = <0x30350000 0x10000>; + clocks = <&clks IMX7D_CLK_DUMMY>; + status = "disabled"; + }; + + anatop: anatop@30360000 { + compatible = "fsl,imx7d-anatop", "fsl,imx6q-anatop", + "syscon", "simple-bus"; + reg = <0x30360000 0x10000>; + interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>; + + reg_1p0d: regulator-vdd1p0d { + compatible = "fsl,anatop-regulator"; + regulator-name = "vdd1p0d"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1200000>; + anatop-reg-offset = <0x210>; + anatop-vol-bit-shift = <8>; + anatop-vol-bit-width = <5>; + anatop-min-bit-val = <8>; + anatop-min-voltage = <800000>; + anatop-max-voltage = <1200000>; + anatop-enable-bit = <31>; + }; + }; + + snvs: snvs@30370000 { + compatible = "fsl,sec-v4.0-mon", "syscon", "simple-mfd"; + reg = <0x30370000 0x10000>; + + snvs_rtc: snvs-rtc-lp { + compatible = "fsl,sec-v4.0-mon-rtc-lp"; + regmap = <&snvs>; + offset = <0x34>; + interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>; + }; + + snvs_poweroff: snvs-poweroff { + compatible = "syscon-poweroff"; + regmap = <&snvs>; + offset = <0x38>; + mask = <0x60>; + }; + + snvs_pwrkey: snvs-powerkey { + compatible = "fsl,sec-v4.0-pwrkey"; + regmap = <&snvs>; + interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>; + linux,keycode = <KEY_POWER>; + wakeup-source; + }; + }; + + clks: ccm@30380000 { + compatible = "fsl,imx7d-ccm"; + reg = <0x30380000 0x10000>; + interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>; + #clock-cells = <1>; + clocks = <&ckil>, <&osc>; + clock-names = "ckil", "osc"; + }; + + src: src@30390000 { + compatible = "fsl,imx7d-src", "fsl,imx51-src", "syscon"; + reg = <0x30390000 0x10000>; + interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>; + #reset-cells = <1>; + }; + }; + + aips2: aips-bus@30400000 { + compatible = "fsl,aips-bus", "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x30400000 0x400000>; + ranges; + + adc1: adc@30610000 { + compatible = "fsl,imx7d-adc"; + reg = <0x30610000 0x10000>; + interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX7D_ADC_ROOT_CLK>; + clock-names = "adc"; + status = "disabled"; + }; + + adc2: adc@30620000 { + compatible = "fsl,imx7d-adc"; + reg = <0x30620000 0x10000>; + interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX7D_ADC_ROOT_CLK>; + clock-names = "adc"; + status = "disabled"; + }; + + ecspi4: ecspi@30630000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,imx7d-ecspi", "fsl,imx51-ecspi"; + reg = <0x30630000 0x10000>; + interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX7D_ECSPI4_ROOT_CLK>, + <&clks IMX7D_ECSPI4_ROOT_CLK>; + clock-names = "ipg", "per"; + status = "disabled"; + }; + + pwm1: pwm@30660000 { + compatible = "fsl,imx7d-pwm", "fsl,imx27-pwm"; + reg = <0x30660000 0x10000>; + interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX7D_PWM1_ROOT_CLK>, + <&clks IMX7D_PWM1_ROOT_CLK>; + clock-names = "ipg", "per"; + #pwm-cells = <2>; + status = "disabled"; + }; + + pwm2: pwm@30670000 { + compatible = "fsl,imx7d-pwm", "fsl,imx27-pwm"; + reg = <0x30670000 0x10000>; + interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX7D_PWM2_ROOT_CLK>, + <&clks IMX7D_PWM2_ROOT_CLK>; + clock-names = "ipg", "per"; + #pwm-cells = <2>; + status = "disabled"; + }; + + pwm3: pwm@30680000 { + compatible = "fsl,imx7d-pwm", "fsl,imx27-pwm"; + reg = <0x30680000 0x10000>; + interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX7D_PWM3_ROOT_CLK>, + <&clks IMX7D_PWM3_ROOT_CLK>; + clock-names = "ipg", "per"; + #pwm-cells = <2>; + status = "disabled"; + }; + + pwm4: pwm@30690000 { + compatible = "fsl,imx7d-pwm", "fsl,imx27-pwm"; + reg = <0x30690000 0x10000>; + interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX7D_PWM4_ROOT_CLK>, + <&clks IMX7D_PWM4_ROOT_CLK>; + clock-names = "ipg", "per"; + #pwm-cells = <2>; + status = "disabled"; + }; + + lcdif: lcdif@30730000 { + compatible = "fsl,imx7d-lcdif", "fsl,imx28-lcdif"; + reg = <0x30730000 0x10000>; + interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX7D_LCDIF_PIXEL_ROOT_CLK>, + <&clks IMX7D_CLK_DUMMY>, + <&clks IMX7D_CLK_DUMMY>; + clock-names = "pix", "axi", "disp_axi"; + status = "disabled"; + }; + }; + + aips3: aips-bus@30800000 { + compatible = "fsl,aips-bus", "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x30800000 0x400000>; + ranges; + + ecspi1: ecspi@30820000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,imx7d-ecspi", "fsl,imx51-ecspi"; + reg = <0x30820000 0x10000>; + interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX7D_ECSPI1_ROOT_CLK>, + <&clks IMX7D_ECSPI1_ROOT_CLK>; + clock-names = "ipg", "per"; + status = "disabled"; + }; + + ecspi2: ecspi@30830000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,imx7d-ecspi", "fsl,imx51-ecspi"; + reg = <0x30830000 0x10000>; + interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX7D_ECSPI2_ROOT_CLK>, + <&clks IMX7D_ECSPI2_ROOT_CLK>; + clock-names = "ipg", "per"; + status = "disabled"; + }; + + ecspi3: ecspi@30840000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,imx7d-ecspi", "fsl,imx51-ecspi"; + reg = <0x30840000 0x10000>; + interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX7D_ECSPI3_ROOT_CLK>, + <&clks IMX7D_ECSPI3_ROOT_CLK>; + clock-names = "ipg", "per"; + status = "disabled"; + }; + + uart1: serial@30860000 { + compatible = "fsl,imx7d-uart", + "fsl,imx6q-uart"; + reg = <0x30860000 0x10000>; + interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX7D_UART1_ROOT_CLK>, + <&clks IMX7D_UART1_ROOT_CLK>; + clock-names = "ipg", "per"; + status = "disabled"; + }; + + uart2: serial@30890000 { + compatible = "fsl,imx7d-uart", + "fsl,imx6q-uart"; + reg = <0x30890000 0x10000>; + interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX7D_UART2_ROOT_CLK>, + <&clks IMX7D_UART2_ROOT_CLK>; + clock-names = "ipg", "per"; + status = "disabled"; + }; + + uart3: serial@30880000 { + compatible = "fsl,imx7d-uart", + "fsl,imx6q-uart"; + reg = <0x30880000 0x10000>; + interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX7D_UART3_ROOT_CLK>, + <&clks IMX7D_UART3_ROOT_CLK>; + clock-names = "ipg", "per"; + status = "disabled"; + }; + + flexcan1: can@30a00000 { + compatible = "fsl,imx7d-flexcan", "fsl,imx6q-flexcan"; + reg = <0x30a00000 0x10000>; + interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX7D_CLK_DUMMY>, + <&clks IMX7D_CAN1_ROOT_CLK>; + clock-names = "ipg", "per"; + status = "disabled"; + }; + + flexcan2: can@30a10000 { + compatible = "fsl,imx7d-flexcan", "fsl,imx6q-flexcan"; + reg = <0x30a10000 0x10000>; + interrupts = <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX7D_CLK_DUMMY>, + <&clks IMX7D_CAN2_ROOT_CLK>; + clock-names = "ipg", "per"; + status = "disabled"; + }; + + i2c1: i2c@30a20000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,imx7d-i2c", "fsl,imx21-i2c"; + reg = <0x30a20000 0x10000>; + interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX7D_I2C1_ROOT_CLK>; + status = "disabled"; + }; + + i2c2: i2c@30a30000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,imx7d-i2c", "fsl,imx21-i2c"; + reg = <0x30a30000 0x10000>; + interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX7D_I2C2_ROOT_CLK>; + status = "disabled"; + }; + + i2c3: i2c@30a40000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,imx7d-i2c", "fsl,imx21-i2c"; + reg = <0x30a40000 0x10000>; + interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX7D_I2C3_ROOT_CLK>; + status = "disabled"; + }; + + i2c4: i2c@30a50000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,imx7d-i2c", "fsl,imx21-i2c"; + reg = <0x30a50000 0x10000>; + interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX7D_I2C4_ROOT_CLK>; + status = "disabled"; + }; + + uart4: serial@30a60000 { + compatible = "fsl,imx7d-uart", + "fsl,imx6q-uart"; + reg = <0x30a60000 0x10000>; + interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX7D_UART4_ROOT_CLK>, + <&clks IMX7D_UART4_ROOT_CLK>; + clock-names = "ipg", "per"; + status = "disabled"; + }; + + uart5: serial@30a70000 { + compatible = "fsl,imx7d-uart", + "fsl,imx6q-uart"; + reg = <0x30a70000 0x10000>; + interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX7D_UART5_ROOT_CLK>, + <&clks IMX7D_UART5_ROOT_CLK>; + clock-names = "ipg", "per"; + status = "disabled"; + }; + + uart6: serial@30a80000 { + compatible = "fsl,imx7d-uart", + "fsl,imx6q-uart"; + reg = <0x30a80000 0x10000>; + interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX7D_UART6_ROOT_CLK>, + <&clks IMX7D_UART6_ROOT_CLK>; + clock-names = "ipg", "per"; + status = "disabled"; + }; + + uart7: serial@30a90000 { + compatible = "fsl,imx7d-uart", + "fsl,imx6q-uart"; + reg = <0x30a90000 0x10000>; + interrupts = <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX7D_UART7_ROOT_CLK>, + <&clks IMX7D_UART7_ROOT_CLK>; + clock-names = "ipg", "per"; + status = "disabled"; + }; + + usbotg1: usb@30b10000 { + compatible = "fsl,imx7d-usb", "fsl,imx27-usb"; + reg = <0x30b10000 0x200>; + interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX7D_USB_CTRL_CLK>; + fsl,usbphy = <&usbphynop1>; + fsl,usbmisc = <&usbmisc1 0>; + phy-clkgate-delay-us = <400>; + status = "disabled"; + }; + + usbh: usb@30b30000 { + compatible = "fsl,imx7d-usb", "fsl,imx27-usb"; + reg = <0x30b30000 0x200>; + interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX7D_USB_CTRL_CLK>; + fsl,usbphy = <&usbphynop3>; + fsl,usbmisc = <&usbmisc3 0>; + phy_type = "hsic"; + dr_mode = "host"; + phy-clkgate-delay-us = <400>; + status = "disabled"; + }; + + usbmisc1: usbmisc@30b10200 { + #index-cells = <1>; + compatible = "fsl,imx7d-usbmisc", "fsl,imx6q-usbmisc"; + reg = <0x30b10200 0x200>; + }; + + usbmisc3: usbmisc@30b30200 { + #index-cells = <1>; + compatible = "fsl,imx7d-usbmisc", "fsl,imx6q-usbmisc"; + reg = <0x30b30200 0x200>; + }; + + usbphynop1: usbphynop1 { + compatible = "usb-nop-xceiv"; + clocks = <&clks IMX7D_USB_PHY1_CLK>; + clock-names = "main_clk"; + }; + + usbphynop3: usbphynop3 { + compatible = "usb-nop-xceiv"; + clocks = <&clks IMX7D_USB_HSIC_ROOT_CLK>; + clock-names = "main_clk"; + }; + + usdhc1: usdhc@30b40000 { + compatible = "fsl,imx7d-usdhc", "fsl,imx6sl-usdhc"; + reg = <0x30b40000 0x10000>; + interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX7D_CLK_DUMMY>, + <&clks IMX7D_CLK_DUMMY>, + <&clks IMX7D_USDHC1_ROOT_CLK>; + clock-names = "ipg", "ahb", "per"; + bus-width = <4>; + status = "disabled"; + }; + + usdhc2: usdhc@30b50000 { + compatible = "fsl,imx7d-usdhc", "fsl,imx6sl-usdhc"; + reg = <0x30b50000 0x10000>; + interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX7D_CLK_DUMMY>, + <&clks IMX7D_CLK_DUMMY>, + <&clks IMX7D_USDHC2_ROOT_CLK>; + clock-names = "ipg", "ahb", "per"; + bus-width = <4>; + status = "disabled"; + }; + + usdhc3: usdhc@30b60000 { + compatible = "fsl,imx7d-usdhc", "fsl,imx6sl-usdhc"; + reg = <0x30b60000 0x10000>; + interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX7D_CLK_DUMMY>, + <&clks IMX7D_CLK_DUMMY>, + <&clks IMX7D_USDHC3_ROOT_CLK>; + clock-names = "ipg", "ahb", "per"; + bus-width = <4>; + status = "disabled"; + }; + + fec1: ethernet@30be0000 { + compatible = "fsl,imx7d-fec", "fsl,imx6sx-fec"; + reg = <0x30be0000 0x10000>; + interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX7D_ENET_AXI_ROOT_CLK>, + <&clks IMX7D_ENET_AXI_ROOT_CLK>, + <&clks IMX7D_ENET1_TIME_ROOT_CLK>, + <&clks IMX7D_PLL_ENET_MAIN_125M_CLK>, + <&clks IMX7D_ENET_PHY_REF_ROOT_CLK>; + clock-names = "ipg", "ahb", "ptp", + "enet_clk_ref", "enet_out"; + fsl,num-tx-queues=<3>; + fsl,num-rx-queues=<3>; + status = "disabled"; + }; + }; + }; +}; diff --git a/arch/arm/boot/dts/integratorap.dts b/arch/arm/boot/dts/integratorap.dts index cf06e32ee..4b34b54e0 100644 --- a/arch/arm/boot/dts/integratorap.dts +++ b/arch/arm/boot/dts/integratorap.dts @@ -42,7 +42,7 @@ }; syscon { - compatible = "arm,integrator-ap-syscon"; + compatible = "arm,integrator-ap-syscon", "syscon"; reg = <0x11000000 0x100>; interrupt-parent = <&pic>; /* These are the logical module IRQs */ diff --git a/arch/arm/boot/dts/integratorcp.dts b/arch/arm/boot/dts/integratorcp.dts index d43f15b4f..79430fbfe 100644 --- a/arch/arm/boot/dts/integratorcp.dts +++ b/arch/arm/boot/dts/integratorcp.dts @@ -94,7 +94,7 @@ }; syscon { - compatible = "arm,integrator-cp-syscon"; + compatible = "arm,integrator-cp-syscon", "syscon"; reg = <0xcb000000 0x100>; }; diff --git a/arch/arm/boot/dts/keystone-k2e.dtsi b/arch/arm/boot/dts/keystone-k2e.dtsi index 96b349fb0..9a51b8c88 100644 --- a/arch/arm/boot/dts/keystone-k2e.dtsi +++ b/arch/arm/boot/dts/keystone-k2e.dtsi @@ -96,13 +96,16 @@ #address-cells = <3>; #size-cells = <2>; reg = <0x21021000 0x2000>, <0x21020000 0x1000>, <0x02620128 4>; - ranges = <0x81000000 0 0 0x23260000 0x4000 0x4000 - 0x82000000 0 0x60000000 0x60000000 0 0x10000000>; + ranges = <0x82000000 0 0x60000000 0x60000000 + 0 0x10000000>; status = "disabled"; device_type = "pci"; num-lanes = <2>; + bus-range = <0x00 0xff>; + /* error interrupt */ + interrupts = <GIC_SPI 385 IRQ_TYPE_EDGE_RISING>; #interrupt-cells = <1>; interrupt-map-mask = <0 0 0 7>; interrupt-map = <0 0 0 1 &pcie_intc1 0>, /* INT A */ diff --git a/arch/arm/boot/dts/keystone-k2g-evm.dts b/arch/arm/boot/dts/keystone-k2g-evm.dts index 5bfd9e784..692fcbb14 100644 --- a/arch/arm/boot/dts/keystone-k2g-evm.dts +++ b/arch/arm/boot/dts/keystone-k2g-evm.dts @@ -27,6 +27,17 @@ }; +&k2g_pinctrl { + uart0_pins: pinmux_uart0_pins { + pinctrl-single,pins = < + K2G_CORE_IOPAD(0x11cc) (BUFFER_CLASS_B | PULL_DISABLE | MUX_MODE0) /* uart0_rxd.uart0_rxd */ + K2G_CORE_IOPAD(0x11d0) (BUFFER_CLASS_B | PIN_PULLDOWN | MUX_MODE0) /* uart0_txd.uart0_txd */ + >; + }; +}; + &uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pins>; status = "okay"; }; diff --git a/arch/arm/boot/dts/keystone-k2g.dtsi b/arch/arm/boot/dts/keystone-k2g.dtsi index 7ff2796ae..3372615b8 100644 --- a/arch/arm/boot/dts/keystone-k2g.dtsi +++ b/arch/arm/boot/dts/keystone-k2g.dtsi @@ -14,6 +14,7 @@ */ #include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/pinctrl/keystone.h> #include "skeleton.dtsi" / { @@ -75,6 +76,13 @@ ranges = <0x0 0x0 0x0 0xc0000000>; dma-ranges = <0x80000000 0x8 0x00000000 0x80000000>; + k2g_pinctrl: pinmux@02621000 { + compatible = "pinctrl-single"; + reg = <0x02621000 0x410>; + pinctrl-single,register-width = <32>; + pinctrl-single,function-mask = <0x001b0007>; + }; + uart0: serial@02530c00 { compatible = "ns16550a"; current-speed = <115200>; diff --git a/arch/arm/boot/dts/keystone-k2l.dtsi b/arch/arm/boot/dts/keystone-k2l.dtsi index ff22ffc3d..2ee3d0ac2 100644 --- a/arch/arm/boot/dts/keystone-k2l.dtsi +++ b/arch/arm/boot/dts/keystone-k2l.dtsi @@ -54,6 +54,155 @@ interrupts = <GIC_SPI 435 IRQ_TYPE_EDGE_RISING>; }; + k2l_pmx: pinmux@02620690 { + compatible = "pinctrl-single"; + reg = <0x02620690 0xc>; + #address-cells = <1>; + #size-cells = <0>; + pinctrl-single,bit-per-mux; + pinctrl-single,register-width = <32>; + pinctrl-single,function-mask = <0x1>; + status = "disabled"; + + uart3_emifa_pins: pinmux_uart3_emifa_pins { + pinctrl-single,bits = < + /* UART3_EMIFA_SEL */ + 0x0 0x0 0xc0 + >; + }; + + uart2_emifa_pins: pinmux_uart2_emifa_pins { + pinctrl-single,bits = < + /* UART2_EMIFA_SEL */ + 0x0 0x0 0x30 + >; + }; + + uart01_spi2_pins: pinmux_uart01_spi2_pins { + pinctrl-single,bits = < + /* UART01_SPI2_SEL */ + 0x0 0x0 0x4 + >; + }; + + dfesync_rp1_pins: pinmux_dfesync_rp1_pins{ + pinctrl-single,bits = < + /* DFESYNC_RP1_SEL */ + 0x0 0x0 0x2 + >; + }; + + avsif_pins: pinmux_avsif_pins { + pinctrl-single,bits = < + /* AVSIF_SEL */ + 0x0 0x0 0x1 + >; + }; + + gpio_emu_pins: pinmux_gpio_emu_pins { + pinctrl-single,bits = < + /* + * GPIO_EMU_SEL[31]: 0-GPIO31, 1-EMU33 + * GPIO_EMU_SEL[30]: 0-GPIO30, 1-EMU32 + * GPIO_EMU_SEL[29]: 0-GPIO29, 1-EMU31 + * GPIO_EMU_SEL[28]: 0-GPIO28, 1-EMU30 + * GPIO_EMU_SEL[27]: 0-GPIO27, 1-EMU29 + * GPIO_EMU_SEL[26]: 0-GPIO26, 1-EMU28 + * GPIO_EMU_SEL[25]: 0-GPIO25, 1-EMU27 + * GPIO_EMU_SEL[24]: 0-GPIO24, 1-EMU26 + * GPIO_EMU_SEL[23]: 0-GPIO23, 1-EMU25 + * GPIO_EMU_SEL[22]: 0-GPIO22, 1-EMU24 + * GPIO_EMU_SEL[21]: 0-GPIO21, 1-EMU23 + * GPIO_EMU_SEL[20]: 0-GPIO20, 1-EMU22 + * GPIO_EMU_SEL[19]: 0-GPIO19, 1-EMU21 + * GPIO_EMU_SEL[18]: 0-GPIO18, 1-EMU20 + * GPIO_EMU_SEL[17]: 0-GPIO17, 1-EMU19 + */ + 0x4 0x0000 0xFFFE0000 + >; + }; + + gpio_timio_pins: pinmux_gpio_timio_pins { + pinctrl-single,bits = < + /* + * GPIO_TIMIO_SEL[15]: 0-GPIO15, 1-TIMO7 + * GPIO_TIMIO_SEL[14]: 0-GPIO14, 1-TIMO6 + * GPIO_TIMIO_SEL[13]: 0-GPIO13, 1-TIMO5 + * GPIO_TIMIO_SEL[12]: 0-GPIO12, 1-TIMO4 + * GPIO_TIMIO_SEL[11]: 0-GPIO11, 1-TIMO3 + * GPIO_TIMIO_SEL[10]: 0-GPIO10, 1-TIMO2 + * GPIO_TIMIO_SEL[9]: 0-GPIO9, 1-TIMI7 + * GPIO_TIMIO_SEL[8]: 0-GPIO8, 1-TIMI6 + * GPIO_TIMIO_SEL[7]: 0-GPIO7, 1-TIMI5 + * GPIO_TIMIO_SEL[6]: 0-GPIO6, 1-TIMI4 + * GPIO_TIMIO_SEL[5]: 0-GPIO5, 1-TIMI3 + * GPIO_TIMIO_SEL[4]: 0-GPIO4, 1-TIMI2 + */ + 0x4 0x0 0xFFF0 + >; + }; + + gpio_spi2cs_pins: pinmux_gpio_spi2cs_pins { + pinctrl-single,bits = < + /* + * GPIO_SPI2CS_SEL[3]: 0-GPIO3, 1-SPI2CS4 + * GPIO_SPI2CS_SEL[2]: 0-GPIO2, 1-SPI2CS3 + * GPIO_SPI2CS_SEL[1]: 0-GPIO1, 1-SPI2CS2 + * GPIO_SPI2CS_SEL[0]: 0-GPIO0, 1-SPI2CS1 + */ + 0x4 0x0 0xF + >; + }; + + gpio_dfeio_pins: pinmux_gpio_dfeio_pins { + pinctrl-single,bits = < + /* + * GPIO_DFEIO_SEL[31]: 0-DFEIO17, 1-GPIO63 + * GPIO_DFEIO_SEL[30]: 0-DFEIO16, 1-GPIO62 + * GPIO_DFEIO_SEL[29]: 0-DFEIO15, 1-GPIO61 + * GPIO_DFEIO_SEL[28]: 0-DFEIO14, 1-GPIO60 + * GPIO_DFEIO_SEL[27]: 0-DFEIO13, 1-GPIO59 + * GPIO_DFEIO_SEL[26]: 0-DFEIO12, 1-GPIO58 + * GPIO_DFEIO_SEL[25]: 0-DFEIO11, 1-GPIO57 + * GPIO_DFEIO_SEL[24]: 0-DFEIO10, 1-GPIO56 + * GPIO_DFEIO_SEL[23]: 0-DFEIO9, 1-GPIO55 + * GPIO_DFEIO_SEL[22]: 0-DFEIO8, 1-GPIO54 + * GPIO_DFEIO_SEL[21]: 0-DFEIO7, 1-GPIO53 + * GPIO_DFEIO_SEL[20]: 0-DFEIO6, 1-GPIO52 + * GPIO_DFEIO_SEL[19]: 0-DFEIO5, 1-GPIO51 + * GPIO_DFEIO_SEL[18]: 0-DFEIO4, 1-GPIO50 + * GPIO_DFEIO_SEL[17]: 0-DFEIO3, 1-GPIO49 + * GPIO_DFEIO_SEL[16]: 0-DFEIO2, 1-GPIO48 + */ + 0x8 0x0 0xFFFF0000 + >; + }; + + gpio_emifa_pins: pinmux_gpio_emifa_pins { + pinctrl-single,bits = < + /* + * GPIO_EMIFA_SEL[15]: 0-EMIFA17, 1-GPIO47 + * GPIO_EMIFA_SEL[14]: 0-EMIFA16, 1-GPIO46 + * GPIO_EMIFA_SEL[13]: 0-EMIFA15, 1-GPIO45 + * GPIO_EMIFA_SEL[12]: 0-EMIFA14, 1-GPIO44 + * GPIO_EMIFA_SEL[11]: 0-EMIFA13, 1-GPIO43 + * GPIO_EMIFA_SEL[10]: 0-EMIFA10, 1-GPIO42 + * GPIO_EMIFA_SEL[9]: 0-EMIFA9, 1-GPIO41 + * GPIO_EMIFA_SEL[8]: 0-EMIFA8, 1-GPIO40 + * GPIO_EMIFA_SEL[7]: 0-EMIFA7, 1-GPIO39 + * GPIO_EMIFA_SEL[6]: 0-EMIFA6, 1-GPIO38 + * GPIO_EMIFA_SEL[5]: 0-EMIFA5, 1-GPIO37 + * GPIO_EMIFA_SEL[4]: 0-EMIFA4, 1-GPIO36 + * GPIO_EMIFA_SEL[3]: 0-EMIFA3, 1-GPIO35 + * GPIO_EMIFA_SEL[2]: 0-EMIFA2, 1-GPIO34 + * GPIO_EMIFA_SEL[1]: 0-EMIFA1, 1-GPIO33 + * GPIO_EMIFA_SEL[0]: 0-EMIFA0, 1-GPIO32 + */ + 0x8 0x0 0xFFFF + >; + }; + }; + dspgpio0: keystone_dsp_gpio@02620240 { compatible = "ti,keystone-dsp-gpio"; gpio-controller; diff --git a/arch/arm/boot/dts/keystone.dtsi b/arch/arm/boot/dts/keystone.dtsi index e34b22654..e23f46d15 100644 --- a/arch/arm/boot/dts/keystone.dtsi +++ b/arch/arm/boot/dts/keystone.dtsi @@ -294,13 +294,16 @@ #address-cells = <3>; #size-cells = <2>; reg = <0x21801000 0x2000>, <0x21800000 0x1000>, <0x02620128 4>; - ranges = <0x81000000 0 0 0x23250000 0 0x4000 - 0x82000000 0 0x50000000 0x50000000 0 0x10000000>; + ranges = <0x82000000 0 0x50000000 0x50000000 + 0 0x10000000>; status = "disabled"; device_type = "pci"; num-lanes = <2>; + bus-range = <0x00 0xff>; + /* error interrupt */ + interrupts = <GIC_SPI 38 IRQ_TYPE_EDGE_RISING>; #interrupt-cells = <1>; interrupt-map-mask = <0 0 0 7>; interrupt-map = <0 0 0 1 &pcie_intc0 0>, /* INT A */ diff --git a/arch/arm/boot/dts/kirkwood-ns2lite.dts b/arch/arm/boot/dts/kirkwood-ns2lite.dts index 1f2ca60d8..2c661add0 100644 --- a/arch/arm/boot/dts/kirkwood-ns2lite.dts +++ b/arch/arm/boot/dts/kirkwood-ns2lite.dts @@ -26,7 +26,7 @@ blue-sata { label = "ns2:blue:sata"; gpios = <&gpio0 30 GPIO_ACTIVE_LOW>; - linux,default-trigger = "ide-disk"; + linux,default-trigger = "disk-activity"; }; }; }; diff --git a/arch/arm/boot/dts/kirkwood-topkick.dts b/arch/arm/boot/dts/kirkwood-topkick.dts index f5c8c0dd4..1e9a72100 100644 --- a/arch/arm/boot/dts/kirkwood-topkick.dts +++ b/arch/arm/boot/dts/kirkwood-topkick.dts @@ -129,7 +129,7 @@ disk { label = "topkick:yellow:disk"; gpios = <&gpio0 21 GPIO_ACTIVE_LOW>; - linux,default-trigger = "ide-disk"; + linux,default-trigger = "disk-activity"; }; system2 { label = "topkick:red:system"; diff --git a/arch/arm/boot/dts/logicpd-som-lv.dtsi b/arch/arm/boot/dts/logicpd-som-lv.dtsi index 365f39ff5..0ff1c2de9 100644 --- a/arch/arm/boot/dts/logicpd-som-lv.dtsi +++ b/arch/arm/boot/dts/logicpd-som-lv.dtsi @@ -35,10 +35,15 @@ ranges = <0 0 0x00000000 0x1000000>; /* CS0: 16MB for NAND */ nand@0,0 { - linux,mtd-name = "micron,mt29f4g16abbda3w"; + compatible = "ti,omap2-nand"; reg = <0 0 4>; /* CS0, offset 0, IO size 4 */ + interrupt-parent = <&gpmc>; + interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */ + <1 IRQ_TYPE_NONE>; /* termcount */ + linux,mtd-name = "micron,mt29f4g16abbda3w"; nand-bus-width = <16>; ti,nand-ecc-opt = "bch8"; + rb-gpios = <&gpmc 0 GPIO_ACTIVE_HIGH>; /* gpmc_wait0 */ gpmc,sync-clk-ps = <0>; gpmc,cs-on-ns = <0>; gpmc,cs-rd-off-ns = <44>; @@ -54,10 +59,6 @@ gpmc,wr-access-ns = <40>; gpmc,wr-data-mux-bus-ns = <0>; gpmc,device-width = <2>; - - gpmc,page-burst-access-ns = <5>; - gpmc,cycle2cycle-delay-ns = <50>; - #address-cells = <1>; #size-cells = <1>; diff --git a/arch/arm/boot/dts/logicpd-torpedo-37xx-devkit.dts b/arch/arm/boot/dts/logicpd-torpedo-37xx-devkit.dts index 015f795a8..08cce17a2 100644 --- a/arch/arm/boot/dts/logicpd-torpedo-37xx-devkit.dts +++ b/arch/arm/boot/dts/logicpd-torpedo-37xx-devkit.dts @@ -72,7 +72,7 @@ }; }; - pwm10: dmtimer-pwm@10 { + pwm10: dmtimer-pwm { compatible = "ti,omap-dmtimer-pwm"; pinctrl-names = "default"; pinctrl-0 = <&pwm_pins>; @@ -147,7 +147,7 @@ gpio = <&gpio5 27 GPIO_ACTIVE_HIGH>; /* gpio155, lcd INI */ }; - lcd0: display@0 { + lcd0: display { compatible = "panel-dpi"; label = "15"; status = "okay"; diff --git a/arch/arm/boot/dts/logicpd-torpedo-som.dtsi b/arch/arm/boot/dts/logicpd-torpedo-som.dtsi index 5e9a13c0e..1c2c74655 100644 --- a/arch/arm/boot/dts/logicpd-torpedo-som.dtsi +++ b/arch/arm/boot/dts/logicpd-torpedo-som.dtsi @@ -46,6 +46,7 @@ linux,mtd-name = "micron,mt29f4g16abbda3w"; nand-bus-width = <16>; ti,nand-ecc-opt = "bch8"; + rb-gpios = <&gpmc 0 GPIO_ACTIVE_HIGH>; /* gpmc_wait0 */ gpmc,sync-clk-ps = <0>; gpmc,cs-on-ns = <0>; gpmc,cs-rd-off-ns = <44>; diff --git a/arch/arm/boot/dts/ls1021a.dtsi b/arch/arm/boot/dts/ls1021a.dtsi index 5ae8e9297..368e21934 100644 --- a/arch/arm/boot/dts/ls1021a.dtsi +++ b/arch/arm/boot/dts/ls1021a.dtsi @@ -626,6 +626,7 @@ interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>; dr_mode = "host"; snps,quirk-frame-length-adjustment = <0x20>; + snps,dis_rxdet_inp3_quirk; }; pcie@3400000 { diff --git a/arch/arm/boot/dts/meson8-minix-neo-x8.dts b/arch/arm/boot/dts/meson8-minix-neo-x8.dts index 4f536bb1f..8bceb8d34 100644 --- a/arch/arm/boot/dts/meson8-minix-neo-x8.dts +++ b/arch/arm/boot/dts/meson8-minix-neo-x8.dts @@ -80,6 +80,7 @@ pmic@32 { compatible = "ricoh,rn5t618"; reg = <0x32>; + system-power-controller; regulators { }; diff --git a/arch/arm/boot/dts/meson8b.dtsi b/arch/arm/boot/dts/meson8b.dtsi index 2bfe401a4..fc4080de4 100644 --- a/arch/arm/boot/dts/meson8b.dtsi +++ b/arch/arm/boot/dts/meson8b.dtsi @@ -46,6 +46,7 @@ #include <dt-bindings/clock/meson8b-clkc.h> #include <dt-bindings/gpio/meson8b-gpio.h> +#include <dt-bindings/reset/amlogic,meson8b-reset.h> #include "skeleton.dtsi" / { @@ -105,6 +106,12 @@ #interrupt-cells = <3>; }; + reset: reset-controller@c1104404 { + compatible = "amlogic,meson8b-reset"; + reg = <0xc1104404 0x20>; + #reset-cells = <1>; + }; + wdt: watchdog@c1109900 { compatible = "amlogic,meson8b-wdt"; reg = <0xc1109900 0x8>; diff --git a/arch/arm/boot/dts/mpa1600.dts b/arch/arm/boot/dts/mpa1600.dts index f0f5e1098..116ce78be 100644 --- a/arch/arm/boot/dts/mpa1600.dts +++ b/arch/arm/boot/dts/mpa1600.dts @@ -17,15 +17,6 @@ }; clocks { - #address-cells = <1>; - #size-cells = <1>; - ranges; - - main_clock: clock@0 { - compatible = "atmel,osc", "fixed-clock"; - clock-frequency = <18432000>; - }; - slow_xtal { clock-frequency = <32768>; }; @@ -61,7 +52,7 @@ }; }; - i2c@0 { + i2c-gpio-0 { status = "okay"; }; diff --git a/arch/arm/boot/dts/omap24xx-clocks.dtsi b/arch/arm/boot/dts/omap24xx-clocks.dtsi index ca73722b5..769a346de 100644 --- a/arch/arm/boot/dts/omap24xx-clocks.dtsi +++ b/arch/arm/boot/dts/omap24xx-clocks.dtsi @@ -164,7 +164,7 @@ clock-div = <1>; }; - func_96m_ck: func_96m_ck { + func_96m_ck: func_96m_ck@540 { #clock-cells = <0>; }; diff --git a/arch/arm/boot/dts/omap3-beagle-xm.dts b/arch/arm/boot/dts/omap3-beagle-xm.dts index 01e1e2d5c..8ffde0628 100644 --- a/arch/arm/boot/dts/omap3-beagle-xm.dts +++ b/arch/arm/boot/dts/omap3-beagle-xm.dts @@ -91,7 +91,7 @@ vcc-supply = <&hsusb2_power>; }; - tfp410: encoder@0 { + tfp410: encoder0 { compatible = "ti,tfp410"; powerdown-gpios = <&twl_gpio 2 GPIO_ACTIVE_LOW>; @@ -104,7 +104,7 @@ port@0 { reg = <0>; - tfp410_in: endpoint@0 { + tfp410_in: endpoint { remote-endpoint = <&dpi_out>; }; }; @@ -112,14 +112,14 @@ port@1 { reg = <1>; - tfp410_out: endpoint@0 { + tfp410_out: endpoint { remote-endpoint = <&dvi_connector_in>; }; }; }; }; - dvi0: connector@0 { + dvi0: connector0 { compatible = "dvi-connector"; label = "dvi"; @@ -134,7 +134,7 @@ }; }; - tv0: connector@1 { + tv0: connector1 { compatible = "svideo-connector"; label = "tv"; diff --git a/arch/arm/boot/dts/omap3-beagle.dts b/arch/arm/boot/dts/omap3-beagle.dts index a4deff0e2..a19d907d4 100644 --- a/arch/arm/boot/dts/omap3-beagle.dts +++ b/arch/arm/boot/dts/omap3-beagle.dts @@ -85,7 +85,7 @@ }; - tfp410: encoder@0 { + tfp410: encoder0 { compatible = "ti,tfp410"; powerdown-gpios = <&gpio6 10 GPIO_ACTIVE_LOW>; /* gpio_170 */ @@ -99,7 +99,7 @@ port@0 { reg = <0>; - tfp410_in: endpoint@0 { + tfp410_in: endpoint { remote-endpoint = <&dpi_out>; }; }; @@ -107,14 +107,14 @@ port@1 { reg = <1>; - tfp410_out: endpoint@0 { + tfp410_out: endpoint { remote-endpoint = <&dvi_connector_in>; }; }; }; }; - dvi0: connector@0 { + dvi0: connector0 { compatible = "dvi-connector"; label = "dvi"; @@ -129,7 +129,7 @@ }; }; - tv0: connector@1 { + tv0: connector1 { compatible = "svideo-connector"; label = "tv"; diff --git a/arch/arm/boot/dts/omap3-cm-t3x.dtsi b/arch/arm/boot/dts/omap3-cm-t3x.dtsi index a8127bc31..6a0df13fa 100644 --- a/arch/arm/boot/dts/omap3-cm-t3x.dtsi +++ b/arch/arm/boot/dts/omap3-cm-t3x.dtsi @@ -57,7 +57,7 @@ regulator-max-microvolt = <3300000>; }; - tv0: connector@1 { + tv0: connector { compatible = "svideo-connector"; label = "tv"; diff --git a/arch/arm/boot/dts/omap3-devkit8000-common.dtsi b/arch/arm/boot/dts/omap3-devkit8000-common.dtsi index b1b8ebf90..586010179 100644 --- a/arch/arm/boot/dts/omap3-devkit8000-common.dtsi +++ b/arch/arm/boot/dts/omap3-devkit8000-common.dtsi @@ -68,7 +68,7 @@ }; }; - tfp410: encoder@0 { + tfp410: encoder0 { compatible = "ti,tfp410"; powerdown-gpios = <&twl_gpio 7 GPIO_ACTIVE_LOW>; @@ -79,7 +79,7 @@ port@0 { reg = <0>; - tfp410_in: endpoint@0 { + tfp410_in: endpoint { remote-endpoint = <&dpi_dvi_out>; }; }; @@ -87,14 +87,14 @@ port@1 { reg = <1>; - tfp410_out: endpoint@0 { + tfp410_out: endpoint { remote-endpoint = <&dvi_connector_in>; }; }; }; }; - dvi0: connector@0 { + dvi0: connector0 { compatible = "dvi-connector"; label = "dvi"; @@ -109,7 +109,7 @@ }; }; - tv0: connector@1 { + tv0: connector1 { compatible = "svideo-connector"; label = "tv"; @@ -352,7 +352,7 @@ vdda_dac-supply = <&vdac>; port { - dpi_dvi_out: endpoint@0 { + dpi_dvi_out: endpoint { remote-endpoint = <&tfp410_in>; data-lines = <24>; }; diff --git a/arch/arm/boot/dts/omap3-devkit8000-lcd-common.dtsi b/arch/arm/boot/dts/omap3-devkit8000-lcd-common.dtsi index 738910db5..2d64bcffa 100644 --- a/arch/arm/boot/dts/omap3-devkit8000-lcd-common.dtsi +++ b/arch/arm/boot/dts/omap3-devkit8000-lcd-common.dtsi @@ -14,7 +14,7 @@ display2 = &tv0; }; - lcd0: display@0 { + lcd0: display { compatible = "panel-dpi"; label = "lcd"; @@ -30,7 +30,7 @@ &dss { port { - dpi_lcd_out: endpoint@1 { + dpi_lcd_out: endpoint { remote-endpoint = <&lcd_in>; data-lines = <24>; }; diff --git a/arch/arm/boot/dts/omap3-devkit8000-lcd43.dts b/arch/arm/boot/dts/omap3-devkit8000-lcd43.dts index d5705356d..d8b16398b 100644 --- a/arch/arm/boot/dts/omap3-devkit8000-lcd43.dts +++ b/arch/arm/boot/dts/omap3-devkit8000-lcd43.dts @@ -16,7 +16,7 @@ model = "TimLL OMAP3 Devkit8000 with 4.3'' LCD panel"; compatible = "timll,omap3-devkit8000", "ti,omap3"; - lcd0: display@0 { + lcd0: display { panel-timing { clock-frequency = <10164705>; hactive = <480>; diff --git a/arch/arm/boot/dts/omap3-devkit8000-lcd70.dts b/arch/arm/boot/dts/omap3-devkit8000-lcd70.dts index 4afad4b23..edb37ba80 100644 --- a/arch/arm/boot/dts/omap3-devkit8000-lcd70.dts +++ b/arch/arm/boot/dts/omap3-devkit8000-lcd70.dts @@ -16,7 +16,7 @@ model = "TimLL OMAP3 Devkit8000 with 7.0'' LCD panel"; compatible = "timll,omap3-devkit8000", "ti,omap3"; - lcd0: display@0 { + lcd0: display { panel-timing { clock-frequency = <40000000>; hactive = <800>; diff --git a/arch/arm/boot/dts/omap3-gta04.dtsi b/arch/arm/boot/dts/omap3-gta04.dtsi index ab9fb8f49..c09a0574a 100644 --- a/arch/arm/boot/dts/omap3-gta04.dtsi +++ b/arch/arm/boot/dts/omap3-gta04.dtsi @@ -100,12 +100,28 @@ }; }; + backlight { + compatible = "pwm-backlight"; + pwms = <&pwm11 0 2000000 0>; + pwm-names = "backlight"; + brightness-levels = <0 11 20 30 40 50 60 70 80 90 100>; + default-brightness-level = <9>; /* => 90 */ + pinctrl-names = "default"; + pinctrl-0 = <&backlight_pins>; + }; + + pwm11: dmtimer-pwm { + compatible = "ti,omap-dmtimer-pwm"; + ti,timers = <&timer11>; + #pwm-cells = <3>; + }; + hsusb2_phy: hsusb2_phy { compatible = "usb-nop-xceiv"; reset-gpios = <&gpio6 14 GPIO_ACTIVE_LOW>; }; - tv0: connector@1 { + tv0: connector { compatible = "svideo-connector"; label = "tv"; @@ -126,19 +142,24 @@ port@0 { reg = <0>; - opa_in: endpoint@0 { + opa_in: endpoint { remote-endpoint = <&venc_out>; }; }; port@1 { reg = <1>; - opa_out: endpoint@0 { + opa_out: endpoint { remote-endpoint = <&tv_connector_in>; }; }; }; }; + + wifi_pwrseq: wifi_pwrseq { + compatible = "mmc-pwrseq-simple"; + reset-gpios = <&tca6507 0 GPIO_ACTIVE_LOW>; /* W2CBW003 reset through tca6507 */ + }; }; &omap3_pmx_core { @@ -190,6 +211,12 @@ >; }; + backlight_pins: backlight_pins_pimnux { + pinctrl-single,pins = < + OMAP3_CORE1_IOPAD(0x20ba, MUX_MODE3) /* gpt11/gpio57 */ + >; + }; + dss_dpi_pins: pinmux_dss_dpi_pins { pinctrl-single,pins = < OMAP3_CORE1_IOPAD(0x20d4, PIN_OUTPUT | MUX_MODE0) /* dss_pclk.dss_pclk */ @@ -228,6 +255,24 @@ OMAP3_CORE1_IOPAD(0x21c6, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c3_sda.hdq */ >; }; + + bma180_pins: pinmux_bma180_pins { + pinctrl-single,pins = < + OMAP3_CORE1_IOPAD(0x213a, PIN_INPUT_PULLUP | MUX_MODE4) /* gpio115 */ + >; + }; + + itg3200_pins: pinmux_itg3200_pins { + pinctrl-single,pins = < + OMAP3_CORE1_IOPAD(0x20b8, PIN_INPUT_PULLUP | MUX_MODE4) /* gpio56 */ + >; + }; + + hmc5843_pins: pinmux_hmc5843_pins { + pinctrl-single,pins = < + OMAP3_CORE1_IOPAD(0x2134, PIN_INPUT_PULLUP | MUX_MODE4) /* gpio112 */ + >; + }; }; &omap3_pmx_core2 { @@ -298,6 +343,8 @@ bma180@41 { compatible = "bosch,bma180"; reg = <0x41>; + pinctrl-names = "default"; + pintcrl-0 = <&bma180_pins>; interrupt-parent = <&gpio4>; interrupts = <19 IRQ_TYPE_LEVEL_HIGH>; /* GPIO_115 */ }; @@ -306,12 +353,14 @@ itg3200@68 { compatible = "invensense,itg3200"; reg = <0x68>; + pinctrl-names = "default"; + pinctrl-0 = <&itg3200_pins>; interrupt-parent = <&gpio2>; - interrupts = <24 0>; /* GPIO_56 */ + interrupts = <24 IRQ_TYPE_EDGE_FALLING>; /* GPIO_56 */ }; - /* leds */ - tca6507@45 { + /* leds + gpios */ + tca6507: tca6507@45 { compatible = "ti,tca6507"; #address-cells = <1>; #size-cells = <0>; @@ -351,6 +400,10 @@ hmc5843@1e { compatible = "honeywell,hmc5883l"; reg = <0x1e>; + pinctrl-names = "default"; + pinctrl-0 = <&hmc5843_pins>; + interrupt-parent = <&gpio4>; + interrupts = <16 IRQ_TYPE_EDGE_FALLING>; /* gpio112 */ }; /* touchscreen */ @@ -362,6 +415,12 @@ gpios = <&gpio6 0 GPIO_ACTIVE_LOW>; ti,x-plate-ohms = <600>; }; + + /* RFID EEPROM */ + m24lr64@50 { + compatible = "at,24c64"; + reg = <0x50>; + }; }; &i2c3 { @@ -398,6 +457,7 @@ bus-width = <4>; ti,non-removable; cap-power-off-card; + mmc-pwrseq = <&wifi_pwrseq>; }; &mmc3 { diff --git a/arch/arm/boot/dts/omap3-ha-lcd.dts b/arch/arm/boot/dts/omap3-ha-lcd.dts index 11aa28d73..60af7c235 100644 --- a/arch/arm/boot/dts/omap3-ha-lcd.dts +++ b/arch/arm/boot/dts/omap3-ha-lcd.dts @@ -121,7 +121,7 @@ display0 = &lcd0; }; - lcd0: display@0 { + lcd0: display { compatible = "panel-dpi"; label = "lcd"; diff --git a/arch/arm/boot/dts/omap3-igep0020-common.dtsi b/arch/arm/boot/dts/omap3-igep0020-common.dtsi index b69710606..667f96245 100644 --- a/arch/arm/boot/dts/omap3-igep0020-common.dtsi +++ b/arch/arm/boot/dts/omap3-igep0020-common.dtsi @@ -60,7 +60,7 @@ vcc-supply = <&hsusb1_power>; }; - tfp410: encoder@0 { + tfp410: encoder { compatible = "ti,tfp410"; powerdown-gpios = <&gpio6 10 GPIO_ACTIVE_LOW>; /* gpio_170 */ @@ -71,7 +71,7 @@ port@0 { reg = <0>; - tfp410_in: endpoint@0 { + tfp410_in: endpoint { remote-endpoint = <&dpi_out>; }; }; @@ -79,14 +79,14 @@ port@1 { reg = <1>; - tfp410_out: endpoint@0 { + tfp410_out: endpoint { remote-endpoint = <&dvi_connector_in>; }; }; }; }; - dvi0: connector@0 { + dvi0: connector { compatible = "dvi-connector"; label = "dvi"; diff --git a/arch/arm/boot/dts/omap3-n900.dts b/arch/arm/boot/dts/omap3-n900.dts index 2b74a81d1..2a6078a84 100644 --- a/arch/arm/boot/dts/omap3-n900.dts +++ b/arch/arm/boot/dts/omap3-n900.dts @@ -143,6 +143,18 @@ io-channels = <&twl_madc 0>, <&twl_madc 4>, <&twl_madc 12>; io-channel-names = "temp", "bsi", "vbat"; }; + + pwm9: dmtimer-pwm { + compatible = "ti,omap-dmtimer-pwm"; + #pwm-cells = <3>; + ti,timers = <&timer9>; + ti,clock-source = <0x00>; /* timer_sys_ck */ + }; + + ir: n900-ir { + compatible = "nokia,n900-ir"; + pwms = <&pwm9 0 26316 0>; /* 38000 Hz */ + }; }; &omap3_pmx_core { diff --git a/arch/arm/boot/dts/omap3-overo-common-dvi.dtsi b/arch/arm/boot/dts/omap3-overo-common-dvi.dtsi index 802f704f6..ae5564abb 100644 --- a/arch/arm/boot/dts/omap3-overo-common-dvi.dtsi +++ b/arch/arm/boot/dts/omap3-overo-common-dvi.dtsi @@ -69,7 +69,7 @@ display0 = &dvi0; }; - tfp410: encoder@0 { + tfp410: encoder { compatible = "ti,tfp410"; ports { @@ -79,7 +79,7 @@ port@0 { reg = <0>; - tfp410_in: endpoint@0 { + tfp410_in: endpoint { remote-endpoint = <&dpi_out>; }; }; @@ -87,14 +87,14 @@ port@1 { reg = <1>; - tfp410_out: endpoint@0 { + tfp410_out: endpoint { remote-endpoint = <&dvi_connector_in>; }; }; }; }; - dvi0: connector@0 { + dvi0: connector { compatible = "dvi-connector"; label = "dvi"; diff --git a/arch/arm/boot/dts/omap3-overo-common-lcd35.dtsi b/arch/arm/boot/dts/omap3-overo-common-lcd35.dtsi index 6314da258..ca86da682 100644 --- a/arch/arm/boot/dts/omap3-overo-common-lcd35.dtsi +++ b/arch/arm/boot/dts/omap3-overo-common-lcd35.dtsi @@ -119,7 +119,7 @@ pinctrl-names = "default"; pinctrl-0 = <&mcspi1_pins>; - lcd0: display@0 { + lcd0: display { compatible = "lgphilips,lb035q02"; label = "lcd35"; diff --git a/arch/arm/boot/dts/omap3-overo-common-lcd43.dtsi b/arch/arm/boot/dts/omap3-overo-common-lcd43.dtsi index 7e3fe85a8..b0753ef8a 100644 --- a/arch/arm/boot/dts/omap3-overo-common-lcd43.dtsi +++ b/arch/arm/boot/dts/omap3-overo-common-lcd43.dtsi @@ -96,7 +96,7 @@ display0 = &lcd0; }; - lcd0: display@0 { + lcd0: display { compatible = "samsung,lte430wq-f0c", "panel-dpi"; label = "lcd43"; diff --git a/arch/arm/boot/dts/omap3-pandora-common.dtsi b/arch/arm/boot/dts/omap3-pandora-common.dtsi index bcf39d606..dbc4dc721 100644 --- a/arch/arm/boot/dts/omap3-pandora-common.dtsi +++ b/arch/arm/boot/dts/omap3-pandora-common.dtsi @@ -27,7 +27,7 @@ display0 = &lcd; }; - tv: connector@1 { + tv: connector { compatible = "connector-analog-tv"; label = "tv"; diff --git a/arch/arm/boot/dts/omap3-sb-t35.dtsi b/arch/arm/boot/dts/omap3-sb-t35.dtsi index 827f61426..73643fabd 100644 --- a/arch/arm/boot/dts/omap3-sb-t35.dtsi +++ b/arch/arm/boot/dts/omap3-sb-t35.dtsi @@ -3,7 +3,7 @@ */ / { - tfp410: encoder@0 { + tfp410: encoder { compatible = "ti,tfp410"; powerdown-gpios = <&gpio2 22 GPIO_ACTIVE_LOW>; /* gpio_54 */ @@ -18,7 +18,7 @@ port@0 { reg = <0>; - tfp410_in: endpoint@0 { + tfp410_in: endpoint { remote-endpoint = <&dpi_out>; }; }; @@ -26,14 +26,14 @@ port@1 { reg = <1>; - tfp410_out: endpoint@0 { + tfp410_out: endpoint { remote-endpoint = <&dvi_connector_in>; }; }; }; }; - dvi0: connector@0 { + dvi0: connector { compatible = "dvi-connector"; label = "dvi"; diff --git a/arch/arm/boot/dts/omap3-thunder.dts b/arch/arm/boot/dts/omap3-thunder.dts index d659515ab..9736ba79b 100644 --- a/arch/arm/boot/dts/omap3-thunder.dts +++ b/arch/arm/boot/dts/omap3-thunder.dts @@ -85,7 +85,7 @@ display0 = &lcd0; }; - lcd0: display@0 { + lcd0: display { compatible = "samsung,lte430wq-f0c", "panel-dpi"; label = "lcd"; diff --git a/arch/arm/boot/dts/omap3.dtsi b/arch/arm/boot/dts/omap3.dtsi index 9fbda3852..4c3c471d2 100644 --- a/arch/arm/boot/dts/omap3.dtsi +++ b/arch/arm/boot/dts/omap3.dtsi @@ -493,6 +493,8 @@ dmas = <&sdma 31>, <&sdma 32>; dma-names = "tx", "rx"; + clocks = <&mcbsp1_fck>; + clock-names = "fck"; status = "disabled"; }; @@ -511,6 +513,8 @@ dmas = <&sdma 33>, <&sdma 34>; dma-names = "tx", "rx"; + clocks = <&mcbsp2_fck>, <&mcbsp2_ick>; + clock-names = "fck", "ick"; status = "disabled"; }; @@ -529,6 +533,8 @@ dmas = <&sdma 17>, <&sdma 18>; dma-names = "tx", "rx"; + clocks = <&mcbsp3_fck>, <&mcbsp3_ick>; + clock-names = "fck", "ick"; status = "disabled"; }; @@ -545,6 +551,8 @@ dmas = <&sdma 19>, <&sdma 20>; dma-names = "tx", "rx"; + clocks = <&mcbsp4_fck>; + clock-names = "fck"; status = "disabled"; }; @@ -561,6 +569,8 @@ dmas = <&sdma 21>, <&sdma 22>; dma-names = "tx", "rx"; + clocks = <&mcbsp5_fck>; + clock-names = "fck"; status = "disabled"; }; diff --git a/arch/arm/boot/dts/omap4-duovero-parlor.dts b/arch/arm/boot/dts/omap4-duovero-parlor.dts index 06c54822d..6b39808b8 100644 --- a/arch/arm/boot/dts/omap4-duovero-parlor.dts +++ b/arch/arm/boot/dts/omap4-duovero-parlor.dts @@ -40,7 +40,7 @@ }; }; - hdmi0: connector@0 { + hdmi0: connector { compatible = "hdmi-connector"; label = "hdmi"; diff --git a/arch/arm/boot/dts/omap4-duovero.dtsi b/arch/arm/boot/dts/omap4-duovero.dtsi index f2a94fa62..a90b582e4 100644 --- a/arch/arm/boot/dts/omap4-duovero.dtsi +++ b/arch/arm/boot/dts/omap4-duovero.dtsi @@ -177,6 +177,7 @@ twl6040: twl@4b { compatible = "ti,twl6040"; + #clock-cells = <0>; reg = <0x4b>; interrupts = <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>; /* IRQ_SYS_2N cascaded to gic */ ti,audpwron-gpio = <&gpio6 0 GPIO_ACTIVE_HIGH>; /* gpio_160 */ @@ -207,6 +208,10 @@ &mcpdm { pinctrl-names = "default"; pinctrl-0 = <&mcpdm_pins>; + + clocks = <&twl6040>; + clock-names = "pdmclk"; + status = "okay"; }; diff --git a/arch/arm/boot/dts/omap4-panda-common.dtsi b/arch/arm/boot/dts/omap4-panda-common.dtsi index df2e356ec..f8f13952c 100644 --- a/arch/arm/boot/dts/omap4-panda-common.dtsi +++ b/arch/arm/boot/dts/omap4-panda-common.dtsi @@ -103,7 +103,7 @@ enable-active-high; }; - tfp410: encoder@0 { + tfp410: encoder0 { compatible = "ti,tfp410"; powerdown-gpios = <&gpio1 0 GPIO_ACTIVE_LOW>; /* gpio_0 */ @@ -114,7 +114,7 @@ port@0 { reg = <0>; - tfp410_in: endpoint@0 { + tfp410_in: endpoint { remote-endpoint = <&dpi_out>; }; }; @@ -122,14 +122,14 @@ port@1 { reg = <1>; - tfp410_out: endpoint@0 { + tfp410_out: endpoint { remote-endpoint = <&dvi_connector_in>; }; }; }; }; - dvi0: connector@0 { + dvi0: connector0 { compatible = "dvi-connector"; label = "dvi"; @@ -144,7 +144,7 @@ }; }; - tpd12s015: encoder@1 { + tpd12s015: encoder1 { compatible = "ti,tpd12s015"; gpios = <&gpio2 28 GPIO_ACTIVE_HIGH>, /* 60, CT CP HPD */ @@ -158,7 +158,7 @@ port@0 { reg = <0>; - tpd12s015_in: endpoint@0 { + tpd12s015_in: endpoint { remote-endpoint = <&hdmi_out>; }; }; @@ -166,14 +166,14 @@ port@1 { reg = <1>; - tpd12s015_out: endpoint@0 { + tpd12s015_out: endpoint { remote-endpoint = <&hdmi_connector_in>; }; }; }; }; - hdmi0: connector@1 { + hdmi0: connector1 { compatible = "hdmi-connector"; label = "hdmi"; @@ -376,6 +376,7 @@ twl6040: twl@4b { compatible = "ti,twl6040"; + #clock-cells = <0>; reg = <0x4b>; pinctrl-names = "default"; @@ -479,6 +480,10 @@ &mcpdm { pinctrl-names = "default"; pinctrl-0 = <&mcpdm_pins>; + + clocks = <&twl6040>; + clock-names = "pdmclk"; + status = "okay"; }; diff --git a/arch/arm/boot/dts/omap4-sdp.dts b/arch/arm/boot/dts/omap4-sdp.dts index aae513265..10d73a784 100644 --- a/arch/arm/boot/dts/omap4-sdp.dts +++ b/arch/arm/boot/dts/omap4-sdp.dts @@ -160,7 +160,7 @@ enable-active-high; }; - tpd12s015: encoder@0 { + tpd12s015: encoder { compatible = "ti,tpd12s015"; gpios = <&gpio2 28 GPIO_ACTIVE_HIGH>, /* 60, CT CP HPD */ @@ -174,7 +174,7 @@ port@0 { reg = <0>; - tpd12s015_in: endpoint@0 { + tpd12s015_in: endpoint { remote-endpoint = <&hdmi_out>; }; }; @@ -182,14 +182,14 @@ port@1 { reg = <1>; - tpd12s015_out: endpoint@0 { + tpd12s015_out: endpoint { remote-endpoint = <&hdmi_connector_in>; }; }; }; }; - hdmi0: connector@0 { + hdmi0: connector { compatible = "hdmi-connector"; label = "hdmi"; @@ -367,6 +367,7 @@ twl6040: twl@4b { compatible = "ti,twl6040"; + #clock-cells = <0>; reg = <0x4b>; pinctrl-names = "default"; @@ -620,6 +621,10 @@ &mcpdm { pinctrl-names = "default"; pinctrl-0 = <&mcpdm_pins>; + + clocks = <&twl6040>; + clock-names = "pdmclk"; + status = "okay"; }; diff --git a/arch/arm/boot/dts/omap4-var-om44customboard.dtsi b/arch/arm/boot/dts/omap4-var-om44customboard.dtsi index 6e278d771..74940b6d7 100644 --- a/arch/arm/boot/dts/omap4-var-om44customboard.dtsi +++ b/arch/arm/boot/dts/omap4-var-om44customboard.dtsi @@ -45,7 +45,7 @@ }; }; - hdmi0: connector@0 { + hdmi0: connector { compatible = "hdmi-connector"; pinctrl-names = "default"; pinctrl-0 = <&hdmi_hpd_pins>; diff --git a/arch/arm/boot/dts/omap4-var-som-om44.dtsi b/arch/arm/boot/dts/omap4-var-som-om44.dtsi index a17997f4e..873cfc872 100644 --- a/arch/arm/boot/dts/omap4-var-som-om44.dtsi +++ b/arch/arm/boot/dts/omap4-var-som-om44.dtsi @@ -189,6 +189,7 @@ twl6040: twl@4b { compatible = "ti,twl6040"; + #clock-cells = <0>; reg = <0x4b>; pinctrl-names = "default"; @@ -252,6 +253,10 @@ &mcpdm { pinctrl-names = "default"; pinctrl-0 = <&mcpdm_pins>; + + clocks = <&twl6040>; + clock-names = "pdmclk"; + status = "okay"; }; diff --git a/arch/arm/boot/dts/omap5-board-common.dtsi b/arch/arm/boot/dts/omap5-board-common.dtsi index 5d5b620b7..519611320 100644 --- a/arch/arm/boot/dts/omap5-board-common.dtsi +++ b/arch/arm/boot/dts/omap5-board-common.dtsi @@ -87,7 +87,7 @@ }; }; - tpd12s015: encoder@0 { + tpd12s015: encoder { compatible = "ti,tpd12s015"; pinctrl-names = "default"; @@ -102,7 +102,7 @@ port@0 { reg = <0>; - tpd12s015_in: endpoint@0 { + tpd12s015_in: endpoint { remote-endpoint = <&hdmi_out>; }; }; @@ -110,14 +110,14 @@ port@1 { reg = <1>; - tpd12s015_out: endpoint@0 { + tpd12s015_out: endpoint { remote-endpoint = <&hdmi_connector_in>; }; }; }; }; - hdmi0: connector@0 { + hdmi0: connector { compatible = "hdmi-connector"; label = "hdmi"; @@ -637,6 +637,7 @@ twl6040: twl@4b { compatible = "ti,twl6040"; + #clock-cells = <0>; reg = <0x4b>; pinctrl-names = "default"; @@ -658,6 +659,10 @@ &mcpdm { pinctrl-names = "default"; pinctrl-0 = <&mcpdm_pins>; + + clocks = <&twl6040>; + clock-names = "pdmclk"; + status = "okay"; }; diff --git a/arch/arm/boot/dts/omap5-cm-t54.dts b/arch/arm/boot/dts/omap5-cm-t54.dts index 93fdfa967..a9765605d 100644 --- a/arch/arm/boot/dts/omap5-cm-t54.dts +++ b/arch/arm/boot/dts/omap5-cm-t54.dts @@ -112,7 +112,7 @@ }; }; - hdmi0: connector@0 { + hdmi0: connector0 { compatible = "hdmi-connector"; label = "hdmi"; @@ -130,7 +130,7 @@ }; }; - tfp410: encoder@0 { + tfp410: encoder0 { compatible = "ti,tfp410"; ports { @@ -140,7 +140,7 @@ port@0 { reg = <0>; - tfp410_in: endpoint@0 { + tfp410_in: endpoint { remote-endpoint = <&dpi_dvi_out>; }; }; @@ -148,14 +148,14 @@ port@1 { reg = <1>; - tfp410_out: endpoint@0 { + tfp410_out: endpoint { remote-endpoint = <&dvi_connector_in>; }; }; }; }; - dvi0: connector@1 { + dvi0: connector1 { compatible = "dvi-connector"; label = "dvi"; @@ -646,12 +646,17 @@ pinctrl-0 = <&dss_dpi_pins>; port { + #address-cells = <1>; + #size-cells = <0>; + dpi_dvi_out: endpoint@0 { + reg = <0>; remote-endpoint = <&tfp410_in>; data-lines = <24>; }; dpi_lcd_out: endpoint@1 { + reg = <1>; remote-endpoint = <&lcd_in>; data-lines = <24>; }; diff --git a/arch/arm/boot/dts/pm9g45.dts b/arch/arm/boot/dts/pm9g45.dts index 66afcff67..0abd7bf17 100644 --- a/arch/arm/boot/dts/pm9g45.dts +++ b/arch/arm/boot/dts/pm9g45.dts @@ -21,15 +21,6 @@ }; clocks { - #address-cells = <1>; - #size-cells = <1>; - ranges; - - main_clock: clock@0 { - compatible = "atmel,osc", "fixed-clock"; - clock-frequency = <12000000>; - }; - slow_xtal { clock-frequency = <32768>; }; diff --git a/arch/arm/boot/dts/pxa27x.dtsi b/arch/arm/boot/dts/pxa27x.dtsi index 210192c38..9e73dc6b3 100644 --- a/arch/arm/boot/dts/pxa27x.dtsi +++ b/arch/arm/boot/dts/pxa27x.dtsi @@ -22,8 +22,15 @@ marvell,intc-nr-irqs = <34>; }; + pinctrl: pinctrl@40e00000 { + reg = <0x40e00054 0x20 0x40e0000c 0xc 0x40e0010c 4 + 0x40f00020 0x10>; + compatible = "marvell,pxa27x-pinctrl"; + }; + gpio: gpio@40e00000 { compatible = "intel,pxa27x-gpio"; + gpio-ranges = <&pinctrl 0 0 128>; clocks = <&clks CLK_NONE>; }; diff --git a/arch/arm/boot/dts/pxa2xx.dtsi b/arch/arm/boot/dts/pxa2xx.dtsi index 5e5af078b..3ff077ca4 100644 --- a/arch/arm/boot/dts/pxa2xx.dtsi +++ b/arch/arm/boot/dts/pxa2xx.dtsi @@ -140,5 +140,13 @@ reg = <0x40900000 0x3c>; interrupts = <30 31>; }; + + lcd-controller@40500000 { + compatible = "marvell,pxa2xx-lcdc"; + reg = <0x44000000 0x10000>; + interrupts = <17>; + clocks = <&clks CLK_LCD>; + status = "disabled"; + }; }; }; diff --git a/arch/arm/boot/dts/pxa3xx.dtsi b/arch/arm/boot/dts/pxa3xx.dtsi index fec47bcd8..9d6f3aace 100644 --- a/arch/arm/boot/dts/pxa3xx.dtsi +++ b/arch/arm/boot/dts/pxa3xx.dtsi @@ -1,6 +1,96 @@ /* The pxa3xx skeleton simply augments the 2xx version */ #include "pxa2xx.dtsi" +#define MFP_PIN_PXA300(gpio) \ + ((gpio <= 2) ? (0x00b4 + 4 * gpio) : \ + (gpio <= 26) ? (0x027c + 4 * (gpio - 3)) : \ + (gpio <= 98) ? (0x0400 + 4 * (gpio - 27)) : \ + (gpio <= 127) ? (0x0600 + 4 * (gpio - 99)) : \ + 0) + +#define MFP_PIN_PXA310(gpio) \ + ((gpio <= 2) ? (0x00b4 + 4 * gpio) : \ + (gpio <= 26) ? (0x027c + 4 * (gpio - 3)) : \ + (gpio <= 29) ? (0x0400 + 4 * (gpio - 27)) : \ + (gpio <= 98) ? (0x0418 + 4 * (gpio - 30)) : \ + (gpio <= 127) ? (0x0600 + 4 * (gpio - 99)) : \ + (gpio <= 262) ? 0 : \ + (gpio <= 268) ? (0x052c + 4 * (gpio - 263)) : \ + 0) + +#define MFP_PIN_PXA320(gpio) \ + ((gpio <= 4) ? (0x0124 + 4 * gpio) : \ + (gpio <= 9) ? (0x028c + 4 * (gpio - 5)) : \ + (gpio <= 10) ? (0x0458 + 4 * (gpio - 10)) : \ + (gpio <= 26) ? (0x02a0 + 4 * (gpio - 11)) : \ + (gpio <= 48) ? (0x0400 + 4 * (gpio - 27)) : \ + (gpio <= 62) ? (0x045c + 4 * (gpio - 49)) : \ + (gpio <= 73) ? (0x04b4 + 4 * (gpio - 63)) : \ + (gpio <= 98) ? (0x04f0 + 4 * (gpio - 74)) : \ + (gpio <= 127) ? (0x0600 + 4 * (gpio - 99)) : \ + 0) + +/* + * MFP Alternate functions for pins having a gpio. + * Example of use: pinctrl-single,pins = < MFP_PIN_PXA310(21) MFP_AF1 > + */ +#define MFP_AF0 (0 << 0) +#define MFP_AF1 (1 << 0) +#define MFP_AF2 (2 << 0) +#define MFP_AF3 (3 << 0) +#define MFP_AF4 (4 << 0) +#define MFP_AF5 (5 << 0) +#define MFP_AF6 (6 << 0) + +/* + * MFP drive strength functions for pins. + * Example of use: pinctrl-single,drive-strength = MFP_DS03X; + */ +#define MFP_DSMSK (0x7 << 10) +#define MFP_DS01X < (0x0 << 10) MFP_DSMSK > +#define MFP_DS02X < (0x1 << 10) MFP_DSMSK > +#define MFP_DS03X < (0x2 << 10) MFP_DSMSK > +#define MFP_DS04X < (0x3 << 10) MFP_DSMSK > +#define MFP_DS06X < (0x4 << 10) MFP_DSMSK > +#define MFP_DS08X < (0x5 << 10) MFP_DSMSK > +#define MFP_DS10X < (0x6 << 10) MFP_DSMSK > +#define MFP_DS13X < (0x7 << 10) MFP_DSMSK > + +/* + * MFP low power mode for pins. + * Example of use: + * pinctrl-single,low-power-mode = MFP_LPM(MFP_LPM_PULL_LOW|MFP_LPM_EDGE_FALL); + * + * Table that determines the low power modes outputs, with actual settings + * used in parentheses for don't-care values. Except for the float output, + * the configured driven and pulled levels match, so if there is a need for + * non-LPM pulled output, the same configuration could probably be used. + * + * Output value sleep_oe_n sleep_data pullup_en pulldown_en pull_sel + * (bit 7) (bit 8) (bit 14) (bit 13) (bit 15) + * + * Input 0 X(0) X(0) X(0) 0 + * Drive 0 0 0 0 X(1) 0 + * Drive 1 0 1 X(1) 0 0 + * Pull hi (1) 1 X(1) 1 0 0 + * Pull lo (0) 1 X(0) 0 1 0 + * Z (float) 1 X(0) 0 0 0 + */ +#define MFP_LPM(x) < (x) MFP_LPM_MSK > + +#define MFP_LPM_MSK 0xe1f0 +#define MFP_LPM_INPUT 0x0000 +#define MFP_LPM_DRIVE_LOW 0x2000 +#define MFP_LPM_DRIVE_HIGH 0x4100 +#define MFP_LPM_PULL_LOW 0x2080 +#define MFP_LPM_PULL_HIGH 0x4180 +#define MFP_LPM_FLOAT 0x0080 + +#define MFP_LPM_EDGE_NONE 0x0000 +#define MFP_LPM_EDGE_RISE 0x0010 +#define MFP_LPM_EDGE_FALL 0x0020 +#define MFP_LPM_EDGE_BOTH 0x0030 + / { model = "Marvell PXA3xx familiy SoC"; compatible = "marvell,pxa3xx"; @@ -43,6 +133,15 @@ marvell,intc-nr-irqs = <56>; }; + pinctrl: pinctrl@40e10000 { + compatible = "pinconf-single"; + reg = <0x40e10000 0xffff>; + #address-cells = <1>; + #size-cells = <0>; + pinctrl-single,register-width = <32>; + pinctrl-single,function-mask = <0x7>; + }; + gpio: gpio@40e00000 { compatible = "intel,pxa3xx-gpio"; reg = <0x40e00000 0x10000>; @@ -92,7 +191,39 @@ compatible = "marvell,pxa-ohci"; reg = <0x4c000000 0x10000>; interrupts = <3>; - clocks = <&clks CLK_USBHOST>; + clocks = <&clks CLK_USBH>; + status = "disabled"; + }; + + pwm0: pwm@40b00000 { + compatible = "marvell,pxa270-pwm"; + reg = <0x40b00000 0x10>; + #pwm-cells = <1>; + clocks = <&clks CLK_PWM0>; + status = "disabled"; + }; + + pwm1: pwm@40b00010 { + compatible = "marvell,pxa270-pwm"; + reg = <0x40b00010 0x10>; + #pwm-cells = <1>; + clocks = <&clks CLK_PWM1>; + status = "disabled"; + }; + + pwm2: pwm@40c00000 { + compatible = "marvell,pxa270-pwm"; + reg = <0x40c00000 0x10>; + #pwm-cells = <1>; + clocks = <&clks CLK_PWM0>; + status = "disabled"; + }; + + pwm3: pwm@40c00010 { + compatible = "marvell,pxa270-pwm"; + reg = <0x40c00010 0x10>; + #pwm-cells = <1>; + clocks = <&clks CLK_PWM1>; status = "disabled"; }; }; diff --git a/arch/arm/boot/dts/qcom-apq8060-dragonboard.dts b/arch/arm/boot/dts/qcom-apq8060-dragonboard.dts new file mode 100644 index 000000000..0abc93e5b --- /dev/null +++ b/arch/arm/boot/dts/qcom-apq8060-dragonboard.dts @@ -0,0 +1,626 @@ +/* + * Copyright 2016 Linaro Ltd + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to deal + * in the Software without restriction, including without limitation the rights + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + * copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL + * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN + * THE SOFTWARE. + */ + +#include <dt-bindings/input/input.h> +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/pinctrl/qcom,pmic-gpio.h> +#include "qcom-msm8660.dtsi" + +/ { + model = "Qualcomm APQ8060 Dragonboard"; + compatible = "qcom,apq8060-dragonboard", "qcom,msm8660"; + + aliases { + serial0 = &gsbi12_serial; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + regulators { + compatible = "simple-bus"; + + /* Main power of the board: 3.7V */ + vph: regulator-fixed { + compatible = "regulator-fixed"; + regulator-min-microvolt = <3700000>; + regulator-max-microvolt = <3700000>; + regulator-name = "VPH"; + regulator-type = "voltage"; + regulator-always-on; + regulator-boot-on; + }; + + /* This is a levelshifter for SDCC5 */ + dragon_vio_txb: txb0104rgyr { + compatible = "regulator-fixed"; + regulator-name = "Dragon SDCC levelshifter"; + vin-supply = <&pm8058_l14>; + regulator-always-on; + }; + }; + + soc { + pinctrl@800000 { + /* eMMMC pins, all 8 data lines connected */ + dragon_sdcc1_pins: sdcc1 { + mux { + pins = "gpio159", "gpio160", "gpio161", + "gpio162", "gpio163", "gpio164", + "gpio165", "gpio166", "gpio167", + "gpio168"; + function = "sdc1"; + }; + clk { + pins = "gpio167"; /* SDC5 CLK */ + drive-strength = <16>; + bias-disable; + }; + cmd { + pins = "gpio168"; /* SDC5 CMD */ + drive-strength = <10>; + bias-pull-up; + }; + data { + /* SDC5 D0 to D7 */ + pins = "gpio159", "gpio160", "gpio161", "gpio162", + "gpio163", "gpio164", "gpio165", "gpio166"; + drive-strength = <10>; + bias-pull-up; + }; + }; + + /* + * The SDCC3 pins are hardcoded (non-muxable) but need some pin + * configuration. + */ + dragon_sdcc3_pins: sdcc3 { + clk { + pins = "sdc3_clk"; + drive-strength = <8>; + bias-disable; + }; + cmd { + pins = "sdc3_cmd"; + drive-strength = <8>; + bias-pull-up; + }; + data { + pins = "sdc3_data"; + drive-strength = <8>; + bias-pull-up; + }; + }; + + /* Second SD card slot pins */ + dragon_sdcc5_pins: sdcc5 { + mux { + pins = "gpio95", "gpio96", "gpio97", + "gpio98", "gpio99", "gpio100"; + function = "sdc5"; + }; + clk { + pins = "gpio97"; /* SDC5 CLK */ + drive-strength = <16>; + bias-disable; + }; + cmd { + pins = "gpio95"; /* SDC5 CMD */ + drive-strength = <10>; + bias-pull-up; + }; + data { + /* SDC5 D0 to D3 */ + pins = "gpio96", "gpio98", "gpio99", "gpio100"; + drive-strength = <10>; + bias-pull-up; + }; + }; + + dragon_gsbi12_i2c_pins: gsbi12_i2c { + mux { + pins = "gpio115", "gpio116"; + function = "gsbi12"; + }; + pinconf { + pins = "gpio115", "gpio116"; + drive-strength = <16>; + /* These have external pull-up 4.7kOhm to 1.8V */ + bias-disable; + }; + }; + + /* Primary serial port uart 0 pins */ + dragon_gsbi12_serial_pins: gsbi12_serial { + mux { + pins = "gpio117", "gpio118"; + function = "gsbi12"; + }; + tx { + pins = "gpio117"; + drive-strength = <8>; + bias-disable; + }; + rx { + pins = "gpio118"; + drive-strength = <2>; + bias-pull-up; + }; + }; + }; + + qcom,ssbi@500000 { + pmic@0 { + keypad@148 { + linux,keymap = < + MATRIX_KEY(0, 0, KEY_MENU) + MATRIX_KEY(0, 2, KEY_1) + MATRIX_KEY(0, 3, KEY_4) + MATRIX_KEY(0, 4, KEY_7) + MATRIX_KEY(1, 0, KEY_UP) + MATRIX_KEY(1, 1, KEY_LEFT) + MATRIX_KEY(1, 2, KEY_DOWN) + MATRIX_KEY(1, 3, KEY_5) + MATRIX_KEY(1, 3, KEY_8) + MATRIX_KEY(2, 0, KEY_HOME) + MATRIX_KEY(2, 1, KEY_REPLY) + MATRIX_KEY(2, 2, KEY_2) + MATRIX_KEY(2, 3, KEY_6) + MATRIX_KEY(3, 0, KEY_VOLUMEUP) + MATRIX_KEY(3, 1, KEY_RIGHT) + MATRIX_KEY(3, 2, KEY_3) + MATRIX_KEY(3, 3, KEY_9) + MATRIX_KEY(3, 4, KEY_SWITCHVIDEOMODE) + MATRIX_KEY(4, 0, KEY_VOLUMEDOWN) + MATRIX_KEY(4, 1, KEY_BACK) + MATRIX_KEY(4, 2, KEY_CAMERA) + MATRIX_KEY(4, 3, KEY_KBDILLUMTOGGLE) + >; + keypad,num-rows = <6>; + keypad,num-columns = <5>; + }; + + gpio@150 { + dragon_bmp085_gpios: bmp085-gpios { + pinconf { + pins = "gpio16"; + function = "normal"; + input-enable; + bias-disable; + power-source = <PM8058_GPIO_S3>; + }; + }; + dragon_sdcc3_gpios: sdcc3-gpios { + pinconf { + pins = "gpio22"; + function = "normal"; + input-enable; + bias-disable; + power-source = <PM8058_GPIO_S3>; + }; + }; + dragon_sdcc5_gpios: sdcc5-gpios { + pinconf { + pins = "gpio26"; + function = "normal"; + input-enable; + bias-pull-up; + qcom,pull-up-strength = <PMIC_GPIO_PULL_UP_30>; + power-source = <PM8058_GPIO_S3>; + }; + }; + dragon_ak8975_gpios: ak8975-gpios { + pinconf { + pins = "gpio33"; + function = "normal"; + input-enable; + bias-disable; + power-source = <PM8058_GPIO_S3>; + }; + }; + }; + }; + }; + + gsbi@19c00000 { + status = "ok"; + qcom,mode = <GSBI_PROT_I2C_UART>; + + serial@19c40000 { + status = "ok"; + pinctrl-names = "default"; + pinctrl-0 = <&dragon_gsbi12_serial_pins>; + }; + + i2c@19c80000 { + status = "ok"; + pinctrl-names = "default"; + pinctrl-0 = <&dragon_gsbi12_i2c_pins>; + + ak8975@0c { + compatible = "asahi-kasei,ak8975"; + reg = <0x0c>; + /* GPIO33 has interrupt 224 on the PM8058 */ + interrupt-parent = <&pm8058_gpio>; + interrupts = <224 IRQ_TYPE_EDGE_RISING>; + pinctrl-names = "default"; + pinctrl-0 = <&dragon_ak8975_gpios>; + vid-supply = <&pm8058_lvs0>; // 1.8V + vdd-supply = <&pm8058_l14>; // 2.85V + }; + bmp085@77 { + compatible = "bosch,bmp085"; + reg = <0x77>; + /* GPIO16 has interrupt 207 on the PM8058 */ + interrupt-parent = <&pm8058_gpio>; + interrupts = <207 IRQ_TYPE_EDGE_RISING>; + reset-gpios = <&tlmm 86 GPIO_ACTIVE_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&dragon_bmp085_gpios>; + vddd-supply = <&pm8058_lvs0>; // 1.8V + vdda-supply = <&pm8058_l14>; // 2.85V + }; + }; + }; + + rpm@104000 { + /* + * Set up of the PMIC RPM regulators for this board + * PM8901 supplies "preliminary regulators" whatever + * that means + */ + pm8901-regulators { + vdd_l0-supply = <&pm8901_s4>; + vdd_l1-supply = <&vph>; + vdd_l2-supply = <&vph>; + vdd_l3-supply = <&vph>; + vdd_l4-supply = <&vph>; + vdd_l5-supply = <&vph>; + vdd_l6-supply = <&vph>; + /* vdd_s0-supply, vdd_s1-supply: SAW regulators */ + vdd_s2-supply = <&vph>; + vdd_s3-supply = <&vph>; + vdd_s4-supply = <&vph>; + lvs0_in-supply = <&pm8058_s3>; + lvs1_in-supply = <&pm8901_s4>; + lvs2_in-supply = <&pm8058_l0>; + lvs3_in-supply = <&pm8058_s2>; + mvs_in-supply = <&pm8058_s3>; + + l0 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + bias-pull-down; + }; + l1 { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + bias-pull-down; + }; + l2 { + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <3300000>; + bias-pull-down; + }; + l3 { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + bias-pull-down; + }; + l4 { + regulator-min-microvolt = <2600000>; + regulator-max-microvolt = <2600000>; + bias-pull-down; + }; + l5 { + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2850000>; + bias-pull-down; + }; + l6 { + regulator-min-microvolt = <2200000>; + regulator-max-microvolt = <2200000>; + bias-pull-down; + }; + + /* s0 and s1 are SAW regulators controlled over SPM */ + s2 { + regulator-min-microvolt = <1300000>; + regulator-max-microvolt = <1300000>; + qcom,switch-mode-frequency = <1600000>; + bias-pull-down; + }; + s3 { + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + qcom,switch-mode-frequency = <1600000>; + bias-pull-down; + }; + s4 { + regulator-min-microvolt = <1225000>; + regulator-max-microvolt = <1225000>; + qcom,switch-mode-frequency = <1600000>; + bias-pull-down; + }; + + /* LVS0 thru 3 and mvs0 are just switches */ + lvs0 { + regulator-always-on; + }; + lvs1 { }; + lvs2 { }; + lvs3 { }; + mvs0 {}; + + }; + + pm8058-regulators { + vdd_l0_l1_lvs-supply = <&pm8058_s3>; + vdd_l2_l11_l12-supply = <&vph>; + vdd_l3_l4_l5-supply = <&vph>; + vdd_l6_l7-supply = <&vph>; + vdd_l8-supply = <&vph>; + vdd_l9-supply = <&vph>; + vdd_l10-supply = <&vph>; + vdd_l13_l16-supply = <&pm8058_s4>; + vdd_l14_l15-supply = <&vph>; + vdd_l17_l18-supply = <&vph>; + vdd_l19_l20-supply = <&vph>; + vdd_l21-supply = <&pm8058_s3>; + vdd_l22-supply = <&pm8058_s3>; + vdd_l23_l24_l25-supply = <&pm8058_s3>; + vdd_s0-supply = <&vph>; + vdd_s1-supply = <&vph>; + vdd_s2-supply = <&vph>; + vdd_s3-supply = <&vph>; + vdd_s4-supply = <&vph>; + vdd_ncp-supply = <&vph>; + + l0 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + bias-pull-down; + }; + l1 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + bias-pull-down; + }; + l2 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2600000>; + bias-pull-down; + }; + l3 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + bias-pull-down; + }; + l4 { + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2850000>; + bias-pull-down; + }; + l5 { + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2850000>; + bias-pull-down; + }; + l6 { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3600000>; + bias-pull-down; + }; + l7 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + bias-pull-down; + }; + l8 { + regulator-min-microvolt = <2900000>; + regulator-max-microvolt = <3050000>; + bias-pull-down; + }; + l9 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + bias-pull-down; + }; + l10 { + regulator-min-microvolt = <2600000>; + regulator-max-microvolt = <2600000>; + bias-pull-down; + }; + l11 { + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <1500000>; + bias-pull-down; + }; + l12 { + regulator-min-microvolt = <2900000>; + regulator-max-microvolt = <2900000>; + bias-pull-down; + }; + l13 { + regulator-min-microvolt = <2050000>; + regulator-max-microvolt = <2050000>; + bias-pull-down; + }; + l14 { + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2850000>; + }; + l15 { + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2850000>; + bias-pull-down; + }; + l16 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + bias-pull-down; + regulator-always-on; + }; + l17 { + // 1.5V according to schematic + regulator-min-microvolt = <2600000>; + regulator-max-microvolt = <2600000>; + bias-pull-down; + }; + l18 { + regulator-min-microvolt = <2200000>; + regulator-max-microvolt = <2200000>; + bias-pull-down; + }; + l19 { + regulator-min-microvolt = <2500000>; + regulator-max-microvolt = <2500000>; + bias-pull-down; + }; + l20 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + bias-pull-down; + }; + l21 { + // 1.1 V according to schematic + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + bias-pull-down; + regulator-always-on; + }; + l22 { + // 1.2 V according to schematic + regulator-min-microvolt = <1150000>; + regulator-max-microvolt = <1150000>; + bias-pull-down; + }; + l23 { + // Unused + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + bias-pull-down; + }; + l24 { + // Unused + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + bias-pull-down; + }; + l25 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + bias-pull-down; + }; + + s0 { + // regulator-min-microvolt = <500000>; + // regulator-max-microvolt = <1325000>; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + qcom,switch-mode-frequency = <1600000>; + bias-pull-down; + }; + s1 { + // regulator-min-microvolt = <500000>; + // regulator-max-microvolt = <1250000>; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + qcom,switch-mode-frequency = <1600000>; + bias-pull-down; + }; + s2 { + // 1.3 V according to schematic + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1400000>; + qcom,switch-mode-frequency = <1600000>; + bias-pull-down; + }; + s3 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + qcom,switch-mode-frequency = <1600000>; + regulator-always-on; + bias-pull-down; + }; + s4 { + regulator-min-microvolt = <2200000>; + regulator-max-microvolt = <2200000>; + qcom,switch-mode-frequency = <1600000>; + regulator-always-on; + bias-pull-down; + }; + + /* LVS0 and LVS1 are just switches */ + lvs0 { + bias-pull-down; + }; + lvs1 { + bias-pull-down; + }; + + ncp { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + qcom,switch-mode-frequency = <1600000>; + }; + }; + }; + amba { + /* Internal 3.69 GiB eMMC */ + sdcc@12400000 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&dragon_sdcc1_pins>; + vmmc-supply = <&pm8901_l5>; + vqmmc-supply = <&pm8901_lvs0>; + }; + + /* External micro SD card, directly connected, pulled up to 2.85 V */ + sdcc@12180000 { + status = "okay"; + /* Enable SSBI GPIO 22 as input, use for card detect */ + pinctrl-names = "default"; + pinctrl-0 = <&dragon_sdcc3_pins>, <&dragon_sdcc3_gpios>; + cd-gpios = <&pm8058_gpio 22 GPIO_ACTIVE_LOW>; + wp-gpios = <&tlmm 110 GPIO_ACTIVE_HIGH>; + vmmc-supply = <&pm8058_l14>; + }; + + /* + * Second external micro SD card, using two TXB104RGYR levelshifters + * to lift from 1.8 V to 2.85 V + */ + sdcc@12200000 { + status = "okay"; + /* Enable SSBI GPIO 26 as input, use for card detect */ + pinctrl-names = "default"; + pinctrl-0 = <&dragon_sdcc5_pins>, <&dragon_sdcc5_gpios>; + cd-gpios = <&pm8058_gpio 26 GPIO_ACTIVE_LOW>; + wp-gpios = <&tlmm 106 GPIO_ACTIVE_HIGH>; + vmmc-supply = <&pm8058_l14>; + vqmmc-supply = <&dragon_vio_txb>; + }; + }; + }; +}; diff --git a/arch/arm/boot/dts/qcom-apq8064-arrow-sd-600eval-pins.dtsi b/arch/arm/boot/dts/qcom-apq8064-arrow-sd-600eval-pins.dtsi new file mode 100644 index 000000000..a3efb9704 --- /dev/null +++ b/arch/arm/boot/dts/qcom-apq8064-arrow-sd-600eval-pins.dtsi @@ -0,0 +1,52 @@ +&tlmm_pinmux { + card_detect: card-detect { + mux { + pins = "gpio26"; + function = "gpio"; + bias-disable; + }; + }; + + pcie_pins: pcie-pinmux { + mux { + pins = "gpio27"; + function = "gpio"; + }; + conf { + pins = "gpio27"; + drive-strength = <12>; + bias-disable; + }; + }; + + user_leds: user-leds { + mux { + pins = "gpio3", "gpio7", "gpio10", "gpio11"; + function = "gpio"; + }; + + conf { + pins = "gpio3", "gpio7", "gpio10", "gpio11"; + function = "gpio"; + output-low; + }; + }; + + magneto_pins: magneto-pins { + mux { + pins = "gpio31", "gpio48"; + function = "gpio"; + bias-disable; + }; + }; +}; + +&pm8921_mpps { + mpp_leds: mpp-leds { + pinconf { + pins = "mpp7", "mpp8"; + function = "digital"; + output-low; + }; + }; +}; diff --git a/arch/arm/boot/dts/qcom-apq8064-arrow-sd-600eval.dts b/arch/arm/boot/dts/qcom-apq8064-arrow-sd-600eval.dts new file mode 100644 index 000000000..39ae2bc8c --- /dev/null +++ b/arch/arm/boot/dts/qcom-apq8064-arrow-sd-600eval.dts @@ -0,0 +1,351 @@ +#include "qcom-apq8064-v2.0.dtsi" +#include "qcom-apq8064-arrow-sd-600eval-pins.dtsi" +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/mfd/qcom-rpm.h> + +/ { + model = "Arrow Electronics, APQ8064 SD_600eval"; + compatible = "arrow,sd_600eval", "qcom,apq8064"; + + aliases { + serial0 = &gsbi7_serial; + serial1 = &gsbi1_serial; + i2c0 = &gsbi2_i2c; + i2c1 = &gsbi3_i2c; + i2c2 = &gsbi4_i2c; + i2c3 = &gsbi7_i2c; + spi0 = &gsbi5_spi; + }; + + regulators { + compatible = "simple-bus"; + vph: regulator-fixed@1 { + compatible = "regulator-fixed"; + regulator-min-microvolt = <4500000>; + regulator-max-microvolt = <4500000>; + regulator-name = "VPH"; + regulator-type = "voltage"; + regulator-boot-on; + }; + + /* on board fixed 3.3v supply */ + vcc3v3: vcc3v3 { + compatible = "regulator-fixed"; + regulator-name = "VCC3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + }; + + soc { + rpm@108000 { + regulators { + vdd_s1-supply = <&vph>; + vdd_s2-supply = <&vph>; + vdd_s3-supply = <&vph>; + vdd_s4-supply = <&vph>; + vdd_s5-supply = <&vph>; + vdd_s6-supply = <&vph>; + vdd_s7-supply = <&vph>; + vdd_l1_l2_l12_l18-supply = <&pm8921_s4>; + vdd_l3_l15_l17-supply = <&vph>; + vdd_l4_l14-supply = <&vph>; + vdd_l5_l8_l16-supply = <&vph>; + vdd_l6_l7-supply = <&vph>; + vdd_l9_l11-supply = <&vph>; + vdd_l10_l22-supply = <&vph>; + vdd_l21_l23_l29-supply = <&vph>; + vdd_l24-supply = <&pm8921_s1>; + vdd_l25-supply = <&pm8921_s1>; + vdd_l26-supply = <&pm8921_s7>; + vdd_l27-supply = <&pm8921_s7>; + vdd_l28-supply = <&pm8921_s7>; + vin_lvs1_3_6-supply = <&pm8921_s4>; + vin_lvs2-supply = <&pm8921_s1>; + vin_lvs4_5_7-supply = <&pm8921_s4>; + + s1 { + regulator-always-on; + regulator-min-microvolt = <1225000>; + regulator-max-microvolt = <1225000>; + qcom,switch-mode-frequency = <3200000>; + bias-pull-down; + }; + + s3 { + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1400000>; + qcom,switch-mode-frequency = <4800000>; + }; + + s4 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + qcom,switch-mode-frequency = <1600000>; + qcom,force-mode = <QCOM_RPM_FORCE_MODE_AUTO>; + bias-pull-down; + regulator-always-on; + }; + + s7 { + regulator-min-microvolt = <1300000>; + regulator-max-microvolt = <1300000>; + qcom,switch-mode-frequency = <3200000>; + }; + + l3 { + regulator-min-microvolt = <3050000>; + regulator-max-microvolt = <3300000>; + bias-pull-down; + }; + + l4 { + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1800000>; + bias-pull-down; + }; + + l5 { + regulator-min-microvolt = <2750000>; + regulator-max-microvolt = <3000000>; + bias-pull-down; + regulator-boot-on; + regulator-always-on; + }; + + l6 { + regulator-min-microvolt = <2950000>; + regulator-max-microvolt = <2950000>; + bias-pull-down; + }; + + l23 { + regulator-min-microvolt = <1700000>; + regulator-max-microvolt = <1900000>; + bias-pull-down; + }; + + lvs6 { + bias-pull-down; + }; + + lvs7 { + bias-pull-down; + }; + }; + }; + + gsbi@12440000 { + status = "okay"; + qcom,mode = <GSBI_PROT_UART_W_FC>; + serial@12450000 { + label = "LS-UART1"; + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&gsbi1_uart_4pins>; + }; + }; + + gsbi@12480000 { + status = "okay"; + qcom,mode = <GSBI_PROT_I2C>; + i2c@124a0000 { + /* On Low speed expansion and Sensors */ + label = "LS-I2C0"; + status = "okay"; + lis3mdl_mag@1e { + compatible = "st,lis3mdl-magn"; + reg = <0x1e>; + vdd-supply = <&vcc3v3>; + vddio-supply = <&pm8921_s4>; + pinctrl-names = "default"; + pinctrl-0 = <&magneto_pins>; + interrupt-parent = <&tlmm_pinmux>; + + st,drdy-int-pin = <2>; + interrupts = <48 IRQ_TYPE_EDGE_RISING>, /* DRDY line */ + <31 IRQ_TYPE_EDGE_RISING>; /* INT */ + }; + }; + }; + + gsbi@16200000 { + status = "okay"; + qcom,mode = <GSBI_PROT_I2C>; + i2c@16280000 { + /* On Low speed expansion */ + status = "okay"; + label = "LS-I2C1"; + clock-frequency = <200000>; + eeprom@52 { + compatible = "atmel,24c128"; + reg = <0x52>; + pagesize = <64>; + }; + }; + }; + + gsbi@16300000 { + status = "okay"; + qcom,mode = <GSBI_PROT_I2C>; + i2c@16380000 { + /* On High speed expansion */ + label = "HS-CAM-I2C3"; + status = "okay"; + }; + }; + + gsbi@1a200000 { + status = "okay"; + spi@1a280000 { + /* On Low speed expansion */ + label = "LS-SPI0"; + status = "okay"; + }; + }; + + /* DEBUG UART */ + gsbi@16600000 { + status = "okay"; + qcom,mode = <GSBI_PROT_I2C_UART>; + serial@16640000 { + label = "LS-UART0"; + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&gsbi7_uart_2pins>; + }; + + i2c@16680000 { + /* On High speed expansion */ + status = "okay"; + label = "HS-CAM-I2C2"; + }; + }; + + leds { + pinctrl-names = "default"; + pinctrl-0 = <&user_leds>, <&mpp_leds>; + + compatible = "gpio-leds"; + + user-led0 { + label = "user0-led"; + gpios = <&tlmm_pinmux 3 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "heartbeat"; + default-state = "off"; + }; + + user-led1 { + label = "user1-led"; + gpios = <&tlmm_pinmux 7 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "mmc0"; + default-state = "off"; + }; + + user-led2 { + label = "user2-led"; + gpios = <&tlmm_pinmux 10 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "mmc1"; + default-state = "off"; + }; + + user-led3 { + label = "user3-led"; + gpios = <&tlmm_pinmux 11 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "none"; + default-state = "off"; + }; + + wifi-led { + label = "WiFi-led"; + gpios = <&pm8921_mpps 7 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + + bt-led { + label = "BT-led"; + gpios = <&pm8921_mpps 8 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + }; + + pci@1b500000 { + status = "okay"; + vdda-supply = <&pm8921_s3>; + vdda_phy-supply = <&pm8921_lvs6>; + vdda_refclk-supply = <&vcc3v3>; + pinctrl-0 = <&pcie_pins>; + pinctrl-names = "default"; + perst-gpio = <&tlmm_pinmux 27 GPIO_ACTIVE_LOW>; + }; + + phy@1b400000 { + status = "okay"; + }; + + sata@29000000 { + status = "okay"; + target-supply = <&pm8921_lvs7>; + }; + + /* OTG */ + phy@12500000 { + status = "okay"; + dr_mode = "peripheral"; + vddcx-supply = <&pm8921_s3>; + v3p3-supply = <&pm8921_l3>; + v1p8-supply = <&pm8921_l4>; + }; + + phy@12520000 { + status = "okay"; + vddcx-supply = <&pm8921_s3>; + v3p3-supply = <&pm8921_l3>; + v1p8-supply = <&pm8921_l23>; + }; + + phy@12530000 { + status = "okay"; + vddcx-supply = <&pm8921_s3>; + v3p3-supply = <&pm8921_l3>; + v1p8-supply = <&pm8921_l23>; + }; + + gadget@12500000 { + status = "okay"; + }; + + /* OTG */ + usb@12500000 { + status = "okay"; + }; + + usb@12520000 { + status = "okay"; + }; + + usb@12530000 { + status = "okay"; + }; + + amba { + /* eMMC */ + sdcc@12400000 { + status = "okay"; + vmmc-supply = <&pm8921_l5>; + vqmmc-supply = <&pm8921_s4>; + }; + + /* External micro SD card */ + sdcc@12180000 { + status = "okay"; + vmmc-supply = <&pm8921_l6>; + pinctrl-names = "default"; + pinctrl-0 = <&card_detect>; + cd-gpios = <&tlmm_pinmux 26 GPIO_ACTIVE_HIGH>; + }; + }; + }; +}; diff --git a/arch/arm/boot/dts/qcom-apq8064-asus-nexus7-flo.dts b/arch/arm/boot/dts/qcom-apq8064-asus-nexus7-flo.dts index 32fedfa14..7b05f072b 100644 --- a/arch/arm/boot/dts/qcom-apq8064-asus-nexus7-flo.dts +++ b/arch/arm/boot/dts/qcom-apq8064-asus-nexus7-flo.dts @@ -29,12 +29,6 @@ gpio-keys { compatible = "gpio-keys"; - power { - label = "Power"; - gpios = <&tlmm_pinmux 26 GPIO_ACTIVE_LOW>; - linux,code = <KEY_POWER>; - gpio-key,wakeup; - }; volume_up { label = "Volume Up"; gpios = <&pm8921_gpio 4 GPIO_ACTIVE_HIGH>; diff --git a/arch/arm/boot/dts/qcom-apq8064-pins.dtsi b/arch/arm/boot/dts/qcom-apq8064-pins.dtsi index 4102a98f4..6b801e7e5 100644 --- a/arch/arm/boot/dts/qcom-apq8064-pins.dtsi +++ b/arch/arm/boot/dts/qcom-apq8064-pins.dtsi @@ -7,6 +7,46 @@ }; }; + sdcc1_pins: sdcc1-pin-active { + clk { + pins = "sdc1_clk"; + drive-strengh = <16>; + bias-disable; + }; + + cmd { + pins = "sdc1_cmd"; + drive-strengh = <10>; + bias-pull-up; + }; + + data { + pins = "sdc1_data"; + drive-strengh = <10>; + bias-pull-up; + }; + }; + + sdcc3_pins: sdcc3-pin-active { + clk { + pins = "sdc3_clk"; + drive-strengh = <8>; + bias-disable; + }; + + cmd { + pins = "sdc3_cmd"; + drive-strengh = <8>; + bias-pull-up; + }; + + data { + pins = "sdc3_data"; + drive-strengh = <8>; + bias-pull-up; + }; + }; + ps_hold: ps_hold { mux { pins = "gpio78"; diff --git a/arch/arm/boot/dts/qcom-apq8064-sony-xperia-yuga.dts b/arch/arm/boot/dts/qcom-apq8064-sony-xperia-yuga.dts index 06b3c76c3..ebd675ca9 100644 --- a/arch/arm/boot/dts/qcom-apq8064-sony-xperia-yuga.dts +++ b/arch/arm/boot/dts/qcom-apq8064-sony-xperia-yuga.dts @@ -70,45 +70,6 @@ }; }; - sdcc1_pin_a: sdcc1-pin-active { - clk { - pins = "sdc1_clk"; - drive-strengh = <16>; - bias-disable; - }; - - cmd { - pins = "sdc1_cmd"; - drive-strengh = <10>; - bias-pull-up; - }; - - data { - pins = "sdc1_data"; - drive-strengh = <10>; - bias-pull-up; - }; - }; - - sdcc3_pin_a: sdcc3-pin-active { - clk { - pins = "sdc3_clk"; - drive-strengh = <8>; - bias-disable; - }; - - cmd { - pins = "sdc3_cmd"; - drive-strengh = <8>; - bias-pull-up; - }; - - data { - pins = "sdc3_data"; - drive-strengh = <8>; - bias-pull-up; - }; - }; sdcc3_cd_pin_a: sdcc3-cd-pin-active { pins = "gpio26"; @@ -417,9 +378,6 @@ vmmc-supply = <&pm8921_l5>; vqmmc-supply = <&pm8921_s4>; - - pinctrl-names = "default"; - pinctrl-0 = <&sdcc1_pin_a>; }; sdcc3: sdcc@12180000 { @@ -429,7 +387,7 @@ cd-gpios = <&tlmm_pinmux 26 GPIO_ACTIVE_LOW>; pinctrl-names = "default"; - pinctrl-0 = <&sdcc3_pin_a>, <&sdcc3_cd_pin_a>; + pinctrl-0 = <&sdcc3_pins>, <&sdcc3_cd_pin_a>; }; }; }; diff --git a/arch/arm/boot/dts/qcom-apq8064.dtsi b/arch/arm/boot/dts/qcom-apq8064.dtsi index df96ccdc9..9dc83b09d 100644 --- a/arch/arm/boot/dts/qcom-apq8064.dtsi +++ b/arch/arm/boot/dts/qcom-apq8064.dtsi @@ -5,6 +5,7 @@ #include <dt-bindings/reset/qcom,gcc-msm8960.h> #include <dt-bindings/clock/qcom,mmcc-msm8960.h> #include <dt-bindings/soc/qcom,gsbi.h> +#include <dt-bindings/interrupt-controller/irq.h> #include <dt-bindings/interrupt-controller/arm-gic.h> / { model = "Qualcomm APQ8064"; @@ -177,7 +178,7 @@ apps_smsm: apps@0 { reg = <0>; - #qcom,state-cells = <1>; + #qcom,smem-state-cells = <1>; }; modem_smsm: modem@1 { @@ -213,6 +214,12 @@ }; }; + firmware { + scm { + compatible = "qcom,scm-apq8064"; + }; + }; + soc: soc { #address-cells = <1>; #size-cells = <1>; @@ -247,7 +254,8 @@ }; timer@200a000 { - compatible = "qcom,kpss-timer", "qcom,msm-timer"; + compatible = "qcom,kpss-timer", + "qcom,kpss-wdt-apq8064", "qcom,msm-timer"; interrupts = <1 1 0x301>, <1 2 0x301>, <1 3 0x301>; @@ -552,22 +560,50 @@ compatible = "qcom,pm8921-gpio", "qcom,ssbi-gpio"; reg = <0x150>; - interrupts = <192 1>, <193 1>, <194 1>, - <195 1>, <196 1>, <197 1>, - <198 1>, <199 1>, <200 1>, - <201 1>, <202 1>, <203 1>, - <204 1>, <205 1>, <206 1>, - <207 1>, <208 1>, <209 1>, - <210 1>, <211 1>, <212 1>, - <213 1>, <214 1>, <215 1>, - <216 1>, <217 1>, <218 1>, - <219 1>, <220 1>, <221 1>, - <222 1>, <223 1>, <224 1>, - <225 1>, <226 1>, <227 1>, - <228 1>, <229 1>, <230 1>, - <231 1>, <232 1>, <233 1>, - <234 1>, <235 1>; - + interrupts = <192 IRQ_TYPE_NONE>, + <193 IRQ_TYPE_NONE>, + <194 IRQ_TYPE_NONE>, + <195 IRQ_TYPE_NONE>, + <196 IRQ_TYPE_NONE>, + <197 IRQ_TYPE_NONE>, + <198 IRQ_TYPE_NONE>, + <199 IRQ_TYPE_NONE>, + <200 IRQ_TYPE_NONE>, + <201 IRQ_TYPE_NONE>, + <202 IRQ_TYPE_NONE>, + <203 IRQ_TYPE_NONE>, + <204 IRQ_TYPE_NONE>, + <205 IRQ_TYPE_NONE>, + <206 IRQ_TYPE_NONE>, + <207 IRQ_TYPE_NONE>, + <208 IRQ_TYPE_NONE>, + <209 IRQ_TYPE_NONE>, + <210 IRQ_TYPE_NONE>, + <211 IRQ_TYPE_NONE>, + <212 IRQ_TYPE_NONE>, + <213 IRQ_TYPE_NONE>, + <214 IRQ_TYPE_NONE>, + <215 IRQ_TYPE_NONE>, + <216 IRQ_TYPE_NONE>, + <217 IRQ_TYPE_NONE>, + <218 IRQ_TYPE_NONE>, + <219 IRQ_TYPE_NONE>, + <220 IRQ_TYPE_NONE>, + <221 IRQ_TYPE_NONE>, + <222 IRQ_TYPE_NONE>, + <223 IRQ_TYPE_NONE>, + <224 IRQ_TYPE_NONE>, + <225 IRQ_TYPE_NONE>, + <226 IRQ_TYPE_NONE>, + <227 IRQ_TYPE_NONE>, + <228 IRQ_TYPE_NONE>, + <229 IRQ_TYPE_NONE>, + <230 IRQ_TYPE_NONE>, + <231 IRQ_TYPE_NONE>, + <232 IRQ_TYPE_NONE>, + <233 IRQ_TYPE_NONE>, + <234 IRQ_TYPE_NONE>, + <235 IRQ_TYPE_NONE>; gpio-controller; #gpio-cells = <2>; @@ -580,9 +616,18 @@ gpio-controller; #gpio-cells = <2>; interrupts = - <128 1>, <129 1>, <130 1>, <131 1>, - <132 1>, <133 1>, <134 1>, <135 1>, - <136 1>, <137 1>, <138 1>, <139 1>; + <128 IRQ_TYPE_NONE>, + <129 IRQ_TYPE_NONE>, + <130 IRQ_TYPE_NONE>, + <131 IRQ_TYPE_NONE>, + <132 IRQ_TYPE_NONE>, + <133 IRQ_TYPE_NONE>, + <134 IRQ_TYPE_NONE>, + <135 IRQ_TYPE_NONE>, + <136 IRQ_TYPE_NONE>, + <137 IRQ_TYPE_NONE>, + <138 IRQ_TYPE_NONE>, + <139 IRQ_TYPE_NONE>; }; rtc@11d { @@ -853,6 +898,8 @@ sdcc1: sdcc@12400000 { status = "disabled"; compatible = "arm,pl18x", "arm,primecell"; + pinctrl-names = "default"; + pinctrl-0 = <&sdcc1_pins>; arm,primecell-periphid = <0x00051180>; reg = <0x12400000 0x2000>; interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>; diff --git a/arch/arm/boot/dts/qcom-apq8074-dragonboard.dts b/arch/arm/boot/dts/qcom-apq8074-dragonboard.dts index c0e205315..ad51df27d 100644 --- a/arch/arm/boot/dts/qcom-apq8074-dragonboard.dts +++ b/arch/arm/boot/dts/qcom-apq8074-dragonboard.dts @@ -25,11 +25,23 @@ bus-width = <8>; non-removable; status = "ok"; + + vmmc-supply = <&pm8941_l20>; + vqmmc-supply = <&pm8941_s3>; + + pinctrl-names = "default"; + pinctrl-0 = <&sdhc1_pin_a>; }; sdhci@f98a4900 { cd-gpios = <&msmgpio 62 0x1>; + pinctrl-names = "default"; + pinctrl-0 = <&sdhc2_pin_a>, <&sdhc2_cd_pin_a>; bus-width = <4>; + status = "ok"; + + vmmc-supply = <&pm8941_l21>; + vqmmc-supply = <&pm8941_l13>; }; @@ -59,6 +71,42 @@ function = "blsp_spi8"; }; }; + + sdhc1_pin_a: sdhc1-pin-active { + clk { + pins = "sdc1_clk"; + drive-strength = <16>; + bias-disable; + }; + + cmd-data { + pins = "sdc1_cmd", "sdc1_data"; + drive-strength = <10>; + bias-pull-up; + }; + }; + + sdhc2_cd_pin_a: sdhc2-cd-pin-active { + pins = "gpio62"; + function = "gpio"; + + drive-strength = <2>; + bias-disable; + }; + + sdhc2_pin_a: sdhc2-pin-active { + clk { + pins = "sdc2_clk"; + drive-strength = <10>; + bias-disable; + }; + + cmd-data { + pins = "sdc2_cmd", "sdc2_data"; + drive-strength = <6>; + bias-pull-up; + }; + }; }; i2c@f9967000 { @@ -75,4 +123,203 @@ }; }; }; + + smd { + rpm { + rpm_requests { + pm8841-regulators { + s1 { + regulator-min-microvolt = <675000>; + regulator-max-microvolt = <1050000>; + }; + + s2 { + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <1050000>; + }; + + s3 { + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <1050000>; + }; + + s4 { + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <1050000>; + }; + }; + + pm8941-regulators { + vdd_l1_l3-supply = <&pm8941_s1>; + vdd_l2_lvs1_2_3-supply = <&pm8941_s3>; + vdd_l4_l11-supply = <&pm8941_s1>; + vdd_l5_l7-supply = <&pm8941_s2>; + vdd_l6_l12_l14_l15-supply = <&pm8941_s2>; + vin_5vs-supply = <&pm8941_5v>; + + s1 { + regulator-min-microvolt = <1300000>; + regulator-max-microvolt = <1300000>; + regulator-always-on; + regulator-boot-on; + }; + + s2 { + regulator-min-microvolt = <2150000>; + regulator-max-microvolt = <2150000>; + regulator-boot-on; + }; + + s3 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + }; + + l1 { + regulator-min-microvolt = <1225000>; + regulator-max-microvolt = <1225000>; + + regulator-always-on; + regulator-boot-on; + }; + + l2 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + l3 { + regulator-min-microvolt = <1225000>; + regulator-max-microvolt = <1225000>; + }; + + l4 { + regulator-min-microvolt = <1225000>; + regulator-max-microvolt = <1225000>; + }; + + l5 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + l6 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + regulator-boot-on; + }; + + l7 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + regulator-boot-on; + }; + + l8 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + l9 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2950000>; + }; + + l10 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + l11 { + regulator-min-microvolt = <1300000>; + regulator-max-microvolt = <1300000>; + }; + + l12 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + regulator-always-on; + regulator-boot-on; + }; + + l13 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2950000>; + + regulator-boot-on; + }; + + l14 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + l15 { + regulator-min-microvolt = <2050000>; + regulator-max-microvolt = <2050000>; + }; + + l16 { + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <2700000>; + }; + + l17 { + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <2700000>; + }; + + l18 { + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2850000>; + }; + + l19 { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + l20 { + regulator-min-microvolt = <2950000>; + regulator-max-microvolt = <2950000>; + + regulator-allow-set-load; + regulator-boot-on; + regulator-system-load = <200000>; + }; + + l21 { + regulator-min-microvolt = <2950000>; + regulator-max-microvolt = <2950000>; + + regulator-boot-on; + }; + + l22 { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + }; + + l23 { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + }; + + l24 { + regulator-min-microvolt = <3075000>; + regulator-max-microvolt = <3075000>; + + regulator-boot-on; + }; + }; + }; + }; + }; }; diff --git a/arch/arm/boot/dts/qcom-apq8084.dtsi b/arch/arm/boot/dts/qcom-apq8084.dtsi index a33a09f68..7c2df062a 100644 --- a/arch/arm/boot/dts/qcom-apq8084.dtsi +++ b/arch/arm/boot/dts/qcom-apq8084.dtsi @@ -86,6 +86,14 @@ }; }; + firmware { + scm { + compatible = "qcom,scm"; + clocks = <&gcc GCC_CE1_CLK> , <&gcc GCC_CE1_AXI_CLK>, <&gcc GCC_CE1_AHB_CLK>; + clock-names = "core", "bus", "iface"; + }; + }; + cpu-pmu { compatible = "qcom,krait-pmu"; interrupts = <1 7 0xf04>; diff --git a/arch/arm/boot/dts/qcom-ipq4019.dtsi b/arch/arm/boot/dts/qcom-ipq4019.dtsi index 5c08d1906..b7a24af8f 100644 --- a/arch/arm/boot/dts/qcom-ipq4019.dtsi +++ b/arch/arm/boot/dts/qcom-ipq4019.dtsi @@ -84,6 +84,12 @@ }; }; + pmu { + compatible = "arm,cortex-a7-pmu"; + interrupts = <GIC_PPI 7 (GIC_CPU_MASK_SIMPLE(4) | + IRQ_TYPE_LEVEL_HIGH)>; + }; + clocks { sleep_clk: sleep_clk { compatible = "fixed-clock"; @@ -252,7 +258,7 @@ }; watchdog@b017000 { - compatible = "qcom,kpss-standalone"; + compatible = "qcom,kpss-wdt", "qcom,kpss-wdt-ipq4019"; reg = <0xb017000 0x40>; clocks = <&sleep_clk>; timeout-sec = <10>; diff --git a/arch/arm/boot/dts/qcom-ipq8064.dtsi b/arch/arm/boot/dts/qcom-ipq8064.dtsi index 2601a9079..2e375576f 100644 --- a/arch/arm/boot/dts/qcom-ipq8064.dtsi +++ b/arch/arm/boot/dts/qcom-ipq8064.dtsi @@ -122,7 +122,8 @@ }; timer@200a000 { - compatible = "qcom,kpss-timer", "qcom,msm-timer"; + compatible = "qcom,kpss-timer", + "qcom,kpss-wdt-ipq8064", "qcom,msm-timer"; interrupts = <1 1 0x301>, <1 2 0x301>, <1 3 0x301>, diff --git a/arch/arm/boot/dts/qcom-msm8660-surf.dts b/arch/arm/boot/dts/qcom-msm8660-surf.dts index b17f379e8..23de76455 100644 --- a/arch/arm/boot/dts/qcom-msm8660-surf.dts +++ b/arch/arm/boot/dts/qcom-msm8660-surf.dts @@ -23,15 +23,26 @@ }; }; + /* Temporary fixed regulator */ + vsdcc_fixed: vsdcc-regulator { + compatible = "regulator-fixed"; + regulator-name = "SDCC Power"; + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <2700000>; + regulator-always-on; + }; + amba { /* eMMC */ sdcc1: sdcc@12400000 { status = "okay"; + vmmc-supply = <&vsdcc_fixed>; }; /* External micro SD card */ sdcc3: sdcc@12180000 { status = "okay"; + vmmc-supply = <&vsdcc_fixed>; }; }; }; diff --git a/arch/arm/boot/dts/qcom-msm8660.dtsi b/arch/arm/boot/dts/qcom-msm8660.dtsi index cd214030b..8c65e0d82 100644 --- a/arch/arm/boot/dts/qcom-msm8660.dtsi +++ b/arch/arm/boot/dts/qcom-msm8660.dtsi @@ -2,6 +2,7 @@ /include/ "skeleton.dtsi" +#include <dt-bindings/interrupt-controller/irq.h> #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/clock/qcom,gcc-msm8660.h> #include <dt-bindings/soc/qcom,gsbi.h> @@ -122,11 +123,22 @@ compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm"; reg = <0x19c40000 0x1000>, <0x19c00000 0x1000>; - interrupts = <0 195 0x0>; + interrupts = <0 195 IRQ_TYPE_NONE>; clocks = <&gcc GSBI12_UART_CLK>, <&gcc GSBI12_H_CLK>; clock-names = "core", "iface"; status = "disabled"; }; + + gsbi12_i2c: i2c@19c80000 { + compatible = "qcom,i2c-qup-v1.1.1"; + reg = <0x19c80000 0x1000>; + interrupts = <0 196 IRQ_TYPE_NONE>; + clocks = <&gcc GSBI12_QUP_CLK>, <&gcc GSBI12_H_CLK>; + clock-names = "core", "iface"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; }; qcom,ssbi@500000 { @@ -143,6 +155,82 @@ #address-cells = <1>; #size-cells = <0>; + pm8058_gpio: gpio@150 { + compatible = "qcom,pm8058-gpio", + "qcom,ssbi-gpio"; + reg = <0x150>; + interrupt-parent = <&pmicintc>; + interrupts = <192 IRQ_TYPE_NONE>, + <193 IRQ_TYPE_NONE>, + <194 IRQ_TYPE_NONE>, + <195 IRQ_TYPE_NONE>, + <196 IRQ_TYPE_NONE>, + <197 IRQ_TYPE_NONE>, + <198 IRQ_TYPE_NONE>, + <199 IRQ_TYPE_NONE>, + <200 IRQ_TYPE_NONE>, + <201 IRQ_TYPE_NONE>, + <202 IRQ_TYPE_NONE>, + <203 IRQ_TYPE_NONE>, + <204 IRQ_TYPE_NONE>, + <205 IRQ_TYPE_NONE>, + <206 IRQ_TYPE_NONE>, + <207 IRQ_TYPE_NONE>, + <208 IRQ_TYPE_NONE>, + <209 IRQ_TYPE_NONE>, + <210 IRQ_TYPE_NONE>, + <211 IRQ_TYPE_NONE>, + <212 IRQ_TYPE_NONE>, + <213 IRQ_TYPE_NONE>, + <214 IRQ_TYPE_NONE>, + <215 IRQ_TYPE_NONE>, + <216 IRQ_TYPE_NONE>, + <217 IRQ_TYPE_NONE>, + <218 IRQ_TYPE_NONE>, + <219 IRQ_TYPE_NONE>, + <220 IRQ_TYPE_NONE>, + <221 IRQ_TYPE_NONE>, + <222 IRQ_TYPE_NONE>, + <223 IRQ_TYPE_NONE>, + <224 IRQ_TYPE_NONE>, + <225 IRQ_TYPE_NONE>, + <226 IRQ_TYPE_NONE>, + <227 IRQ_TYPE_NONE>, + <228 IRQ_TYPE_NONE>, + <229 IRQ_TYPE_NONE>, + <230 IRQ_TYPE_NONE>, + <231 IRQ_TYPE_NONE>, + <232 IRQ_TYPE_NONE>, + <233 IRQ_TYPE_NONE>, + <234 IRQ_TYPE_NONE>, + <235 IRQ_TYPE_NONE>; + gpio-controller; + #gpio-cells = <2>; + + }; + + pm8058_mpps: mpps@50 { + compatible = "qcom,pm8058-mpp", + "qcom,ssbi-mpp"; + reg = <0x50>; + gpio-controller; + #gpio-cells = <2>; + interrupt-parent = <&pmicintc>; + interrupts = + <128 IRQ_TYPE_NONE>, + <129 IRQ_TYPE_NONE>, + <130 IRQ_TYPE_NONE>, + <131 IRQ_TYPE_NONE>, + <132 IRQ_TYPE_NONE>, + <133 IRQ_TYPE_NONE>, + <134 IRQ_TYPE_NONE>, + <135 IRQ_TYPE_NONE>, + <136 IRQ_TYPE_NONE>, + <137 IRQ_TYPE_NONE>, + <138 IRQ_TYPE_NONE>, + <139 IRQ_TYPE_NONE>; + }; + pwrkey@1c { compatible = "qcom,pm8058-pwrkey"; reg = <0x1c>; @@ -162,11 +250,11 @@ row-hold = <91500>; }; - rtc@11d { + rtc@1e8 { compatible = "qcom,pm8058-rtc"; + reg = <0x1e8>; interrupt-parent = <&pmicintc>; interrupts = <39 1>; - reg = <0x11d>; allow-set-time; }; @@ -177,13 +265,93 @@ }; }; - /* Temporary fixed regulator */ - vsdcc_fixed: vsdcc-regulator { - compatible = "regulator-fixed"; - regulator-name = "SDCC Power"; - regulator-min-microvolt = <2700000>; - regulator-max-microvolt = <2700000>; - regulator-always-on; + l2cc: clock-controller@2082000 { + compatible = "syscon"; + reg = <0x02082000 0x1000>; + }; + + rpm: rpm@104000 { + compatible = "qcom,rpm-msm8660"; + reg = <0x00104000 0x1000>; + qcom,ipc = <&l2cc 0x8 2>; + + interrupts = <GIC_SPI 19 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 21 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 22 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "ack", "err", "wakeup"; + clocks = <&gcc RPM_MSG_RAM_H_CLK>; + clock-names = "ram"; + + rpmcc: clock-controller { + compatible = "qcom,rpmcc-apq8660", "qcom,rpmcc"; + #clock-cells = <1>; + }; + + pm8901-regulators { + compatible = "qcom,rpm-pm8901-regulators"; + + pm8901_l0: l0 {}; + pm8901_l1: l1 {}; + pm8901_l2: l2 {}; + pm8901_l3: l3 {}; + pm8901_l4: l4 {}; + pm8901_l5: l5 {}; + pm8901_l6: l6 {}; + + /* S0 and S1 Handled as SAW regulators by SPM */ + pm8901_s2: s2 {}; + pm8901_s3: s3 {}; + pm8901_s4: s4 {}; + + pm8901_lvs0: lvs0 {}; + pm8901_lvs1: lvs1 {}; + pm8901_lvs2: lvs2 {}; + pm8901_lvs3: lvs3 {}; + + pm8901_mvs: mvs {}; + }; + + pm8058-regulators { + compatible = "qcom,rpm-pm8058-regulators"; + + pm8058_l0: l0 {}; + pm8058_l1: l1 {}; + pm8058_l2: l2 {}; + pm8058_l3: l3 {}; + pm8058_l4: l4 {}; + pm8058_l5: l5 {}; + pm8058_l6: l6 {}; + pm8058_l7: l7 {}; + pm8058_l8: l8 {}; + pm8058_l9: l9 {}; + pm8058_l10: l10 {}; + pm8058_l11: l11 {}; + pm8058_l12: l12 {}; + pm8058_l13: l13 {}; + pm8058_l14: l14 {}; + pm8058_l15: l15 {}; + pm8058_l16: l16 {}; + pm8058_l17: l17 {}; + pm8058_l18: l18 {}; + pm8058_l19: l19 {}; + pm8058_l20: l20 {}; + pm8058_l21: l21 {}; + pm8058_l22: l22 {}; + pm8058_l23: l23 {}; + pm8058_l24: l24 {}; + pm8058_l25: l25 {}; + + pm8058_s0: s0 {}; + pm8058_s1: s1 {}; + pm8058_s2: s2 {}; + pm8058_s3: s3 {}; + pm8058_s4: s4 {}; + + pm8058_lvs0: lvs0 {}; + pm8058_lvs1: lvs1 {}; + + pm8058_ncp: ncp {}; + }; }; amba { @@ -205,7 +373,6 @@ non-removable; cap-sd-highspeed; cap-mmc-highspeed; - vmmc-supply = <&vsdcc_fixed>; }; sdcc3: sdcc@12180000 { @@ -222,7 +389,21 @@ cap-mmc-highspeed; max-frequency = <48000000>; no-1-8-v; - vmmc-supply = <&vsdcc_fixed>; + }; + + sdcc5: sdcc@12200000 { + compatible = "arm,pl18x", "arm,primecell"; + arm,primecell-periphid = <0x00051180>; + status = "disabled"; + reg = <0x12200000 0x8000>; + interrupts = <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "cmd_irq"; + clocks = <&gcc SDC5_CLK>, <&gcc SDC5_H_CLK>; + clock-names = "mclk", "apb_pclk"; + bus-width = <4>; + cap-sd-highspeed; + cap-mmc-highspeed; + max-frequency = <48000000>; }; }; diff --git a/arch/arm/boot/dts/qcom-msm8960.dtsi b/arch/arm/boot/dts/qcom-msm8960.dtsi index da05e28a8..288f56e0c 100644 --- a/arch/arm/boot/dts/qcom-msm8960.dtsi +++ b/arch/arm/boot/dts/qcom-msm8960.dtsi @@ -87,7 +87,8 @@ }; timer@200a000 { - compatible = "qcom,kpss-timer", "qcom,msm-timer"; + compatible = "qcom,kpss-timer", + "qcom,kpss-wdt-msm8960", "qcom,msm-timer"; interrupts = <1 1 0x301>, <1 2 0x301>, <1 3 0x301>; diff --git a/arch/arm/boot/dts/qcom-msm8974-sony-xperia-honami.dts b/arch/arm/boot/dts/qcom-msm8974-sony-xperia-honami.dts index a0398b69f..3fb4dada6 100644 --- a/arch/arm/boot/dts/qcom-msm8974-sony-xperia-honami.dts +++ b/arch/arm/boot/dts/qcom-msm8974-sony-xperia-honami.dts @@ -367,6 +367,10 @@ }; }; + + dma-controller@f9944000 { + qcom,controlled-remotely; + }; }; &spmi_bus { diff --git a/arch/arm/boot/dts/qcom-msm8974.dtsi b/arch/arm/boot/dts/qcom-msm8974.dtsi index 6f164266a..561d4d136 100644 --- a/arch/arm/boot/dts/qcom-msm8974.dtsi +++ b/arch/arm/boot/dts/qcom-msm8974.dtsi @@ -1,6 +1,6 @@ /dts-v1/; -#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/clock/qcom,gcc-msm8974.h> #include "skeleton.dtsi" @@ -182,7 +182,7 @@ modem_smp2p_out: master-kernel { qcom,entry-name = "master-kernel"; - #qcom,state-cells = <1>; + #qcom,smem-state-cells = <1>; }; modem_smp2p_in: slave-kernel { @@ -208,7 +208,7 @@ wcnss_smp2p_out: master-kernel { qcom,entry-name = "master-kernel"; - #qcom,state-cells = <1>; + #qcom,smem-state-cells = <1>; }; wcnss_smp2p_in: slave-kernel { @@ -232,7 +232,7 @@ apps_smsm: apps@0 { reg = <0>; - #qcom,state-cells = <1>; + #qcom,smem-state-cells = <1>; }; modem_smsm: modem@1 { @@ -260,6 +260,14 @@ }; }; + firmware { + scm { + compatible = "qcom,scm"; + clocks = <&gcc GCC_CE1_CLK>, <&gcc GCC_CE1_AXI_CLK>, <&gcc GCC_CE1_AHB_CLK>; + clock-names = "core", "bus", "iface"; + }; + }; + soc: soc { #address-cells = <1>; #size-cells = <1>; @@ -501,6 +509,8 @@ clock-names = "core", "iface"; #address-cells = <1>; #size-cells = <0>; + dmas = <&blsp2_dma 20>, <&blsp2_dma 21>; + dma-names = "tx", "rx"; }; spmi_bus: spmi@fc4cf000 { @@ -518,6 +528,16 @@ interrupt-controller; #interrupt-cells = <4>; }; + + blsp2_dma: dma-controller@f9944000 { + compatible = "qcom,bam-v1.4.0"; + reg = <0xf9944000 0x19000>; + interrupts = <GIC_SPI 239 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_BLSP2_AHB_CLK>; + clock-names = "bam_clk"; + #dma-cells = <1>; + qcom,ee = <0>; + }; }; smd { diff --git a/arch/arm/boot/dts/qcom-pma8084.dtsi b/arch/arm/boot/dts/qcom-pma8084.dtsi index 4e9bd3f88..82d258094 100644 --- a/arch/arm/boot/dts/qcom-pma8084.dtsi +++ b/arch/arm/boot/dts/qcom-pma8084.dtsi @@ -12,15 +12,23 @@ rtc@6000 { compatible = "qcom,pm8941-rtc"; - reg = <0x6000 0x100>, - <0x6100 0x100>; + reg = <0x6000>, + <0x6100>; reg-names = "rtc", "alarm"; interrupts = <0x0 0x61 0x1 IRQ_TYPE_EDGE_RISING>; }; + pwrkey@800 { + compatible = "qcom,pm8941-pwrkey"; + reg = <0x800>; + interrupts = <0x0 0x8 0 IRQ_TYPE_EDGE_BOTH>; + debounce = <15625>; + bias-pull-up; + }; + pma8084_gpios: gpios@c000 { compatible = "qcom,pma8084-gpio", "qcom,spmi-gpio"; - reg = <0xc000 0x1600>; + reg = <0xc000>; gpio-controller; #gpio-cells = <2>; interrupts = <0 0xc0 0 IRQ_TYPE_NONE>, @@ -49,7 +57,7 @@ pma8084_mpps: mpps@a000 { compatible = "qcom,pma8084-mpp", "qcom,spmi-mpp"; - reg = <0xa000 0x800>; + reg = <0xa000>; gpio-controller; #gpio-cells = <2>; interrupts = <0 0xa0 0 IRQ_TYPE_NONE>, @@ -64,7 +72,7 @@ pma8084_temp: temp-alarm@2400 { compatible = "qcom,spmi-temp-alarm"; - reg = <0x2400 0x100>; + reg = <0x2400>; interrupts = <0 0x24 0 IRQ_TYPE_EDGE_RISING>; #thermal-sensor-cells = <0>; io-channels = <&pma8084_vadc VADC_DIE_TEMP>; @@ -73,7 +81,7 @@ pma8084_vadc: vadc@3100 { compatible = "qcom,spmi-vadc"; - reg = <0x3100 0x100>; + reg = <0x3100>; interrupts = <0x0 0x31 0x0 IRQ_TYPE_EDGE_RISING>; #address-cells = <1>; #size-cells = <0>; diff --git a/arch/arm/boot/dts/r7s72100-genmai.dts b/arch/arm/boot/dts/r7s72100-genmai.dts index a9da7a89f..118a8e2b8 100644 --- a/arch/arm/boot/dts/r7s72100-genmai.dts +++ b/arch/arm/boot/dts/r7s72100-genmai.dts @@ -17,15 +17,15 @@ compatible = "renesas,genmai", "renesas,r7s72100"; aliases { - serial2 = &scif2; + serial0 = &scif2; }; chosen { bootargs = "ignore_loglevel rw root=/dev/nfs ip=dhcp"; - stdout-path = &scif2; + stdout-path = "serial0:115200n8"; }; - memory { + memory@8000000 { device_type = "memory"; reg = <0x08000000 0x08000000>; }; diff --git a/arch/arm/boot/dts/r8a73a4-ape6evm.dts b/arch/arm/boot/dts/r8a73a4-ape6evm.dts index 93ace33e3..ec7c86e06 100644 --- a/arch/arm/boot/dts/r8a73a4-ape6evm.dts +++ b/arch/arm/boot/dts/r8a73a4-ape6evm.dts @@ -36,7 +36,7 @@ reg = <2 0x00000000 0 0x40000000>; }; - vcc_mmc0: regulator@0 { + vcc_mmc0: regulator-mmc0 { compatible = "regulator-fixed"; regulator-name = "MMC0 Vcc"; regulator-min-microvolt = <2800000>; @@ -44,7 +44,7 @@ regulator-always-on; }; - vcc_sdhi0: regulator@1 { + vcc_sdhi0: regulator-sdhi0 { compatible = "regulator-fixed"; regulator-name = "SDHI0 Vcc"; @@ -56,7 +56,7 @@ }; /* Common 1.8V and 3.3V rails, used by several devices on APE6EVM */ - ape6evm_fixed_1v8: regulator@2 { + ape6evm_fixed_1v8: regulator-1v8 { compatible = "regulator-fixed"; regulator-name = "1V8"; regulator-min-microvolt = <1800000>; @@ -64,7 +64,7 @@ regulator-always-on; }; - ape6evm_fixed_3v3: regulator@3 { + ape6evm_fixed_3v3: regulator-3v3 { compatible = "regulator-fixed"; regulator-name = "3V3"; regulator-min-microvolt = <3300000>; @@ -188,12 +188,12 @@ }; &pfc { - scifa0_pins: serial0 { + scifa0_pins: scifa0 { groups = "scifa0_data"; function = "scifa0"; }; - mmc0_pins: mmc { + mmc0_pins: mmc0 { groups = "mmc0_data8", "mmc0_ctrl"; function = "mmc0"; }; diff --git a/arch/arm/boot/dts/r8a73a4.dtsi b/arch/arm/boot/dts/r8a73a4.dtsi index 6954912a3..ca8672778 100644 --- a/arch/arm/boot/dts/r8a73a4.dtsi +++ b/arch/arm/boot/dts/r8a73a4.dtsi @@ -31,6 +31,24 @@ power-domains = <&pd_a2sl>; next-level-cache = <&L2_CA15>; }; + + L2_CA15: cache-controller@0 { + compatible = "cache"; + reg = <0>; + clocks = <&cpg_clocks R8A73A4_CLK_Z>; + power-domains = <&pd_a3sm>; + cache-unified; + cache-level = <2>; + }; + + L2_CA7: cache-controller@100 { + compatible = "cache"; + reg = <0x100>; + clocks = <&cpg_clocks R8A73A4_CLK_Z2>; + power-domains = <&pd_a3km>; + cache-unified; + cache-level = <2>; + }; }; ptm { @@ -46,22 +64,6 @@ <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>; }; - L2_CA15: cache-controller@0 { - compatible = "cache"; - clocks = <&cpg_clocks R8A73A4_CLK_Z>; - power-domains = <&pd_a3sm>; - cache-unified; - cache-level = <2>; - }; - - L2_CA7: cache-controller@1 { - compatible = "cache"; - clocks = <&cpg_clocks R8A73A4_CLK_Z2>; - power-domains = <&pd_a3km>; - cache-unified; - cache-level = <2>; - }; - dbsc1: memory-controller@e6790000 { compatible = "renesas,dbsc-r8a73a4"; reg = <0 0xe6790000 0 0x10000>; diff --git a/arch/arm/boot/dts/r8a7740-armadillo800eva.dts b/arch/arm/boot/dts/r8a7740-armadillo800eva.dts index 2c82dab2b..788507542 100644 --- a/arch/arm/boot/dts/r8a7740-armadillo800eva.dts +++ b/arch/arm/boot/dts/r8a7740-armadillo800eva.dts @@ -20,20 +20,20 @@ compatible = "renesas,armadillo800eva", "renesas,r8a7740"; aliases { - serial1 = &scifa1; + serial0 = &scifa1; }; chosen { - bootargs = "console=tty0 console=ttySC1,115200 earlyprintk=sh-sci.1,115200 ignore_loglevel root=/dev/nfs ip=dhcp rw"; - stdout-path = &scifa1; + bootargs = "earlyprintk ignore_loglevel root=/dev/nfs ip=dhcp rw"; + stdout-path = "serial0:115200n8"; }; - memory { + memory@40000000 { device_type = "memory"; reg = <0x40000000 0x20000000>; }; - reg_3p3v: regulator@0 { + reg_3p3v: regulator-3p3v { compatible = "regulator-fixed"; regulator-name = "fixed-3.3V"; regulator-min-microvolt = <3300000>; @@ -42,7 +42,7 @@ regulator-boot-on; }; - vcc_sdhi0: regulator@1 { + vcc_sdhi0: regulator-vcc-sdhi0 { compatible = "regulator-fixed"; regulator-name = "SDHI0 Vcc"; @@ -53,7 +53,7 @@ enable-active-high; }; - vccq_sdhi0: regulator@2 { + vccq_sdhi0: regulator-vccq-sdhi0 { compatible = "regulator-gpio"; regulator-name = "SDHI0 VccQ"; @@ -69,7 +69,7 @@ enable-active-high; }; - reg_5p0v: regulator@3 { + reg_5p0v: regulator-5p0v { compatible = "regulator-fixed"; regulator-name = "fixed-5.0V"; regulator-min-microvolt = <5000000>; @@ -127,7 +127,7 @@ }; }; - i2c2: i2c@2 { + i2c2: i2c-2 { #address-cells = <1>; #size-cells = <0>; compatible = "i2c-gpio"; @@ -232,7 +232,7 @@ function = "gether"; }; - scifa1_pins: serial1 { + scifa1_pins: scifa1 { groups = "scifa1_data"; function = "scifa1"; }; diff --git a/arch/arm/boot/dts/r8a7740.dtsi b/arch/arm/boot/dts/r8a7740.dtsi index 39b2f88ad..159e04eb1 100644 --- a/arch/arm/boot/dts/r8a7740.dtsi +++ b/arch/arm/boot/dts/r8a7740.dtsi @@ -39,7 +39,7 @@ <0xc2000000 0x1000>; }; - L2: cache-controller { + L2: cache-controller@f0100000 { compatible = "arm,pl310-cache"; reg = <0xf0100000 0x1000>; interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>; diff --git a/arch/arm/boot/dts/r8a7778-bockw.dts b/arch/arm/boot/dts/r8a7778-bockw.dts index e0dab1464..211d239d9 100644 --- a/arch/arm/boot/dts/r8a7778-bockw.dts +++ b/arch/arm/boot/dts/r8a7778-bockw.dts @@ -32,12 +32,12 @@ stdout-path = "serial0:115200n8"; }; - memory { + memory@60000000 { device_type = "memory"; reg = <0x60000000 0x10000000>; }; - fixedregulator3v3: fixedregulator@0 { + fixedregulator3v3: regulator-3v3 { compatible = "regulator-fixed"; regulator-name = "fixed-3.3V"; regulator-min-microvolt = <3300000>; @@ -129,7 +129,7 @@ pinctrl-0 = <&scif_clk_pins>; pinctrl-names = "default"; - scif0_pins: serial0 { + scif0_pins: scif0 { groups = "scif0_data_a", "scif0_ctrl"; function = "scif0"; }; @@ -223,6 +223,7 @@ pinctrl-0 = <&scif0_pins>; pinctrl-names = "default"; + uart-has-rtscts; status = "okay"; }; diff --git a/arch/arm/boot/dts/r8a7778.dtsi b/arch/arm/boot/dts/r8a7778.dtsi index fe787b475..e571d66ea 100644 --- a/arch/arm/boot/dts/r8a7778.dtsi +++ b/arch/arm/boot/dts/r8a7778.dtsi @@ -276,23 +276,23 @@ status = "disabled"; rcar_sound,src { - src3: src@3 { }; - src4: src@4 { }; - src5: src@5 { }; - src6: src@6 { }; - src7: src@7 { }; - src8: src@8 { }; - src9: src@9 { }; + src3: src-3 { }; + src4: src-4 { }; + src5: src-5 { }; + src6: src-6 { }; + src7: src-7 { }; + src8: src-8 { }; + src9: src-9 { }; }; rcar_sound,ssi { - ssi3: ssi@3 { interrupts = <GIC_SPI 0x85 IRQ_TYPE_LEVEL_HIGH>; }; - ssi4: ssi@4 { interrupts = <GIC_SPI 0x85 IRQ_TYPE_LEVEL_HIGH>; }; - ssi5: ssi@5 { interrupts = <GIC_SPI 0x86 IRQ_TYPE_LEVEL_HIGH>; }; - ssi6: ssi@6 { interrupts = <GIC_SPI 0x86 IRQ_TYPE_LEVEL_HIGH>; }; - ssi7: ssi@7 { interrupts = <GIC_SPI 0x86 IRQ_TYPE_LEVEL_HIGH>; }; - ssi8: ssi@8 { interrupts = <GIC_SPI 0x86 IRQ_TYPE_LEVEL_HIGH>; }; - ssi9: ssi@9 { interrupts = <GIC_SPI 0x86 IRQ_TYPE_LEVEL_HIGH>; }; + ssi3: ssi-3 { interrupts = <GIC_SPI 0x85 IRQ_TYPE_LEVEL_HIGH>; }; + ssi4: ssi-4 { interrupts = <GIC_SPI 0x85 IRQ_TYPE_LEVEL_HIGH>; }; + ssi5: ssi-5 { interrupts = <GIC_SPI 0x86 IRQ_TYPE_LEVEL_HIGH>; }; + ssi6: ssi-6 { interrupts = <GIC_SPI 0x86 IRQ_TYPE_LEVEL_HIGH>; }; + ssi7: ssi-7 { interrupts = <GIC_SPI 0x86 IRQ_TYPE_LEVEL_HIGH>; }; + ssi8: ssi-8 { interrupts = <GIC_SPI 0x86 IRQ_TYPE_LEVEL_HIGH>; }; + ssi9: ssi-9 { interrupts = <GIC_SPI 0x86 IRQ_TYPE_LEVEL_HIGH>; }; }; }; diff --git a/arch/arm/boot/dts/r8a7779-marzen.dts b/arch/arm/boot/dts/r8a7779-marzen.dts index b795da6f5..541678df9 100644 --- a/arch/arm/boot/dts/r8a7779-marzen.dts +++ b/arch/arm/boot/dts/r8a7779-marzen.dts @@ -25,15 +25,15 @@ chosen { bootargs = "ignore_loglevel root=/dev/nfs ip=on"; - stdout-path = &scif2; + stdout-path = "serial0:115200n8"; }; - memory { + memory@60000000 { device_type = "memory"; reg = <0x60000000 0x40000000>; }; - fixedregulator3v3: fixedregulator@0 { + fixedregulator3v3: regulator-3v3 { compatible = "regulator-fixed"; regulator-name = "fixed-3.3V"; regulator-min-microvolt = <3300000>; @@ -195,12 +195,12 @@ }; }; - scif2_pins: serial2 { + scif2_pins: scif2 { groups = "scif2_data_c"; function = "scif2"; }; - scif4_pins: serial4 { + scif4_pins: scif4 { groups = "scif4_data"; function = "scif4"; }; diff --git a/arch/arm/boot/dts/r8a7790-lager.dts b/arch/arm/boot/dts/r8a7790-lager.dts index 749ba02b6..52b56fcad 100644 --- a/arch/arm/boot/dts/r8a7790-lager.dts +++ b/arch/arm/boot/dts/r8a7790-lager.dts @@ -76,28 +76,28 @@ keyboard { compatible = "gpio-keys"; - button@1 { + one { linux,code = <KEY_1>; label = "SW2-1"; wakeup-source; debounce-interval = <20>; gpios = <&gpio1 14 GPIO_ACTIVE_LOW>; }; - button@2 { + two { linux,code = <KEY_2>; label = "SW2-2"; wakeup-source; debounce-interval = <20>; gpios = <&gpio1 24 GPIO_ACTIVE_LOW>; }; - button@3 { + three { linux,code = <KEY_3>; label = "SW2-3"; wakeup-source; debounce-interval = <20>; gpios = <&gpio1 26 GPIO_ACTIVE_LOW>; }; - button@4 { + four { linux,code = <KEY_4>; label = "SW2-4"; wakeup-source; @@ -119,7 +119,7 @@ }; }; - fixedregulator3v3: fixedregulator@0 { + fixedregulator3v3: regulator-3v3 { compatible = "regulator-fixed"; regulator-name = "fixed-3.3V"; regulator-min-microvolt = <3300000>; @@ -128,7 +128,7 @@ regulator-always-on; }; - vcc_sdhi0: regulator@1 { + vcc_sdhi0: regulator-vcc-sdhi0 { compatible = "regulator-fixed"; regulator-name = "SDHI0 Vcc"; @@ -139,7 +139,7 @@ enable-active-high; }; - vccq_sdhi0: regulator@2 { + vccq_sdhi0: regulator-vccq-sdhi0 { compatible = "regulator-gpio"; regulator-name = "SDHI0 VccQ"; @@ -152,7 +152,7 @@ 1800000 0>; }; - vcc_sdhi2: regulator@3 { + vcc_sdhi2: regulator-vcc-sdhi2 { compatible = "regulator-fixed"; regulator-name = "SDHI2 Vcc"; @@ -163,7 +163,7 @@ enable-active-high; }; - vccq_sdhi2: regulator@4 { + vccq_sdhi2: regulator-vccq-sdhi2 { compatible = "regulator-gpio"; regulator-name = "SDHI2 VccQ"; @@ -263,7 +263,7 @@ * instantiate the slave device at runtime according to the documentation. * You can then communicate with the slave via IIC3. */ - i2cexio: i2c@8 { + i2cexio: i2c-8 { compatible = "i2c-demux-pinctrl"; i2c-parent = <&iic0>, <&i2c0>; i2c-bus-name = "i2c-exio"; @@ -317,7 +317,7 @@ function = "du"; }; - scif0_pins: serial0 { + scif0_pins: scif0 { groups = "scif0_data"; function = "scif0"; }; @@ -337,7 +337,7 @@ function = "intc"; }; - scifa1_pins: serial1 { + scifa1_pins: scifa1 { groups = "scifa1_data"; function = "scifa1"; }; @@ -371,12 +371,12 @@ function = "mmc1"; }; - qspi_pins: spi0 { + qspi_pins: qspi { groups = "qspi_ctrl", "qspi_data4"; function = "qspi"; }; - msiof1_pins: spi2 { + msiof1_pins: msiof1 { groups = "msiof1_clk", "msiof1_sync", "msiof1_rx", "msiof1_tx"; function = "msiof1"; @@ -427,7 +427,7 @@ function = "usb2"; }; - vin1_pins: vin { + vin1_pins: vin1 { groups = "vin1_data8", "vin1_clk"; function = "vin1"; }; diff --git a/arch/arm/boot/dts/r8a7790.dtsi b/arch/arm/boot/dts/r8a7790.dtsi index 83cf23cd2..d18558f21 100644 --- a/arch/arm/boot/dts/r8a7790.dtsi +++ b/arch/arm/boot/dts/r8a7790.dtsi @@ -44,6 +44,7 @@ cpus { #address-cells = <1>; #size-cells = <0>; + enable-method = "renesas,apmu"; cpu0: cpu@0 { device_type = "cpu"; @@ -92,7 +93,7 @@ next-level-cache = <&L2_CA15>; }; - cpu4: cpu@4 { + cpu4: cpu@100 { device_type = "cpu"; compatible = "arm,cortex-a7"; reg = <0x100>; @@ -101,7 +102,7 @@ next-level-cache = <&L2_CA7>; }; - cpu5: cpu@5 { + cpu5: cpu@101 { device_type = "cpu"; compatible = "arm,cortex-a7"; reg = <0x101>; @@ -110,7 +111,7 @@ next-level-cache = <&L2_CA7>; }; - cpu6: cpu@6 { + cpu6: cpu@102 { device_type = "cpu"; compatible = "arm,cortex-a7"; reg = <0x102>; @@ -119,7 +120,7 @@ next-level-cache = <&L2_CA7>; }; - cpu7: cpu@7 { + cpu7: cpu@103 { device_type = "cpu"; compatible = "arm,cortex-a7"; reg = <0x103>; @@ -127,6 +128,22 @@ power-domains = <&sysc R8A7790_PD_CA7_CPU3>; next-level-cache = <&L2_CA7>; }; + + L2_CA15: cache-controller@0 { + compatible = "cache"; + reg = <0>; + power-domains = <&sysc R8A7790_PD_CA15_SCU>; + cache-unified; + cache-level = <2>; + }; + + L2_CA7: cache-controller@100 { + compatible = "cache"; + reg = <0x100>; + power-domains = <&sysc R8A7790_PD_CA7_SCU>; + cache-unified; + cache-level = <2>; + }; }; thermal-zones { @@ -148,18 +165,16 @@ }; }; - L2_CA15: cache-controller@0 { - compatible = "cache"; - power-domains = <&sysc R8A7790_PD_CA15_SCU>; - cache-unified; - cache-level = <2>; + apmu@e6151000 { + compatible = "renesas,r8a7790-apmu", "renesas,apmu"; + reg = <0 0xe6151000 0 0x188>; + cpus = <&cpu4 &cpu5 &cpu6 &cpu7>; }; - L2_CA7: cache-controller@1 { - compatible = "cache"; - power-domains = <&sysc R8A7790_PD_CA7_SCU>; - cache-unified; - cache-level = <2>; + apmu@e6152000 { + compatible = "renesas,r8a7790-apmu", "renesas,apmu"; + reg = <0 0xe6152000 0 0x188>; + cpus = <&cpu0 &cpu1 &cpu2 &cpu3>; }; gic: interrupt-controller@f1001000 { @@ -517,8 +532,9 @@ reg = <0 0xe6500000 0 0x425>; interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp3_clks R8A7790_CLK_IIC0>; - dmas = <&dmac0 0x61>, <&dmac0 0x62>; - dma-names = "tx", "rx"; + dmas = <&dmac0 0x61>, <&dmac0 0x62>, + <&dmac1 0x61>, <&dmac1 0x62>; + dma-names = "tx", "rx", "tx", "rx"; power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; status = "disabled"; }; @@ -530,8 +546,9 @@ reg = <0 0xe6510000 0 0x425>; interrupts = <GIC_SPI 175 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp3_clks R8A7790_CLK_IIC1>; - dmas = <&dmac0 0x65>, <&dmac0 0x66>; - dma-names = "tx", "rx"; + dmas = <&dmac0 0x65>, <&dmac0 0x66>, + <&dmac1 0x65>, <&dmac1 0x66>; + dma-names = "tx", "rx", "tx", "rx"; power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; status = "disabled"; }; @@ -543,8 +560,9 @@ reg = <0 0xe6520000 0 0x425>; interrupts = <GIC_SPI 176 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp3_clks R8A7790_CLK_IIC2>; - dmas = <&dmac0 0x69>, <&dmac0 0x6a>; - dma-names = "tx", "rx"; + dmas = <&dmac0 0x69>, <&dmac0 0x6a>, + <&dmac1 0x69>, <&dmac1 0x6a>; + dma-names = "tx", "rx", "tx", "rx"; power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; status = "disabled"; }; @@ -556,8 +574,9 @@ reg = <0 0xe60b0000 0 0x425>; interrupts = <GIC_SPI 173 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp9_clks R8A7790_CLK_IICDVFS>; - dmas = <&dmac0 0x77>, <&dmac0 0x78>; - dma-names = "tx", "rx"; + dmas = <&dmac0 0x77>, <&dmac0 0x78>, + <&dmac1 0x77>, <&dmac1 0x78>; + dma-names = "tx", "rx", "tx", "rx"; power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; status = "disabled"; }; @@ -567,8 +586,9 @@ reg = <0 0xee200000 0 0x80>; interrupts = <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp3_clks R8A7790_CLK_MMCIF0>; - dmas = <&dmac0 0xd1>, <&dmac0 0xd2>; - dma-names = "tx", "rx"; + dmas = <&dmac0 0xd1>, <&dmac0 0xd2>, + <&dmac1 0xd1>, <&dmac1 0xd2>; + dma-names = "tx", "rx", "tx", "rx"; power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; reg-io-width = <4>; status = "disabled"; @@ -580,8 +600,9 @@ reg = <0 0xee220000 0 0x80>; interrupts = <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp3_clks R8A7790_CLK_MMCIF1>; - dmas = <&dmac0 0xe1>, <&dmac0 0xe2>; - dma-names = "tx", "rx"; + dmas = <&dmac0 0xe1>, <&dmac0 0xe2>, + <&dmac1 0xe1>, <&dmac1 0xe2>; + dma-names = "tx", "rx", "tx", "rx"; power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; reg-io-width = <4>; status = "disabled"; @@ -598,8 +619,9 @@ reg = <0 0xee100000 0 0x328>; interrupts = <GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp3_clks R8A7790_CLK_SDHI0>; - dmas = <&dmac1 0xcd>, <&dmac1 0xce>; - dma-names = "tx", "rx"; + dmas = <&dmac0 0xcd>, <&dmac0 0xce>, + <&dmac1 0xcd>, <&dmac1 0xce>; + dma-names = "tx", "rx", "tx", "rx"; max-frequency = <195000000>; power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; status = "disabled"; @@ -610,8 +632,9 @@ reg = <0 0xee120000 0 0x328>; interrupts = <GIC_SPI 166 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp3_clks R8A7790_CLK_SDHI1>; - dmas = <&dmac1 0xc9>, <&dmac1 0xca>; - dma-names = "tx", "rx"; + dmas = <&dmac0 0xc9>, <&dmac0 0xca>, + <&dmac1 0xc9>, <&dmac1 0xca>; + dma-names = "tx", "rx", "tx", "rx"; max-frequency = <195000000>; power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; status = "disabled"; @@ -622,8 +645,9 @@ reg = <0 0xee140000 0 0x100>; interrupts = <GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp3_clks R8A7790_CLK_SDHI2>; - dmas = <&dmac1 0xc1>, <&dmac1 0xc2>; - dma-names = "tx", "rx"; + dmas = <&dmac0 0xc1>, <&dmac0 0xc2>, + <&dmac1 0xc1>, <&dmac1 0xc2>; + dma-names = "tx", "rx", "tx", "rx"; max-frequency = <97500000>; power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; status = "disabled"; @@ -634,8 +658,9 @@ reg = <0 0xee160000 0 0x100>; interrupts = <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp3_clks R8A7790_CLK_SDHI3>; - dmas = <&dmac1 0xd3>, <&dmac1 0xd4>; - dma-names = "tx", "rx"; + dmas = <&dmac0 0xd3>, <&dmac0 0xd4>, + <&dmac1 0xd3>, <&dmac1 0xd4>; + dma-names = "tx", "rx", "tx", "rx"; max-frequency = <97500000>; power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; status = "disabled"; @@ -648,8 +673,9 @@ interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp2_clks R8A7790_CLK_SCIFA0>; clock-names = "fck"; - dmas = <&dmac0 0x21>, <&dmac0 0x22>; - dma-names = "tx", "rx"; + dmas = <&dmac0 0x21>, <&dmac0 0x22>, + <&dmac1 0x21>, <&dmac1 0x22>; + dma-names = "tx", "rx", "tx", "rx"; power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; status = "disabled"; }; @@ -661,8 +687,9 @@ interrupts = <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp2_clks R8A7790_CLK_SCIFA1>; clock-names = "fck"; - dmas = <&dmac0 0x25>, <&dmac0 0x26>; - dma-names = "tx", "rx"; + dmas = <&dmac0 0x25>, <&dmac0 0x26>, + <&dmac1 0x25>, <&dmac1 0x26>; + dma-names = "tx", "rx", "tx", "rx"; power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; status = "disabled"; }; @@ -674,8 +701,9 @@ interrupts = <GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp2_clks R8A7790_CLK_SCIFA2>; clock-names = "fck"; - dmas = <&dmac0 0x27>, <&dmac0 0x28>; - dma-names = "tx", "rx"; + dmas = <&dmac0 0x27>, <&dmac0 0x28>, + <&dmac1 0x27>, <&dmac1 0x28>; + dma-names = "tx", "rx", "tx", "rx"; power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; status = "disabled"; }; @@ -687,8 +715,9 @@ interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp2_clks R8A7790_CLK_SCIFB0>; clock-names = "fck"; - dmas = <&dmac0 0x3d>, <&dmac0 0x3e>; - dma-names = "tx", "rx"; + dmas = <&dmac0 0x3d>, <&dmac0 0x3e>, + <&dmac1 0x3d>, <&dmac1 0x3e>; + dma-names = "tx", "rx", "tx", "rx"; power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; status = "disabled"; }; @@ -700,8 +729,9 @@ interrupts = <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp2_clks R8A7790_CLK_SCIFB1>; clock-names = "fck"; - dmas = <&dmac0 0x19>, <&dmac0 0x1a>; - dma-names = "tx", "rx"; + dmas = <&dmac0 0x19>, <&dmac0 0x1a>, + <&dmac1 0x19>, <&dmac1 0x1a>; + dma-names = "tx", "rx", "tx", "rx"; power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; status = "disabled"; }; @@ -713,8 +743,9 @@ interrupts = <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp2_clks R8A7790_CLK_SCIFB2>; clock-names = "fck"; - dmas = <&dmac0 0x1d>, <&dmac0 0x1e>; - dma-names = "tx", "rx"; + dmas = <&dmac0 0x1d>, <&dmac0 0x1e>, + <&dmac1 0x1d>, <&dmac1 0x1e>; + dma-names = "tx", "rx", "tx", "rx"; power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; status = "disabled"; }; @@ -727,8 +758,9 @@ clocks = <&mstp7_clks R8A7790_CLK_SCIF0>, <&zs_clk>, <&scif_clk>; clock-names = "fck", "brg_int", "scif_clk"; - dmas = <&dmac0 0x29>, <&dmac0 0x2a>; - dma-names = "tx", "rx"; + dmas = <&dmac0 0x29>, <&dmac0 0x2a>, + <&dmac1 0x29>, <&dmac1 0x2a>; + dma-names = "tx", "rx", "tx", "rx"; power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; status = "disabled"; }; @@ -741,8 +773,9 @@ clocks = <&mstp7_clks R8A7790_CLK_SCIF1>, <&zs_clk>, <&scif_clk>; clock-names = "fck", "brg_int", "scif_clk"; - dmas = <&dmac0 0x2d>, <&dmac0 0x2e>; - dma-names = "tx", "rx"; + dmas = <&dmac0 0x2d>, <&dmac0 0x2e>, + <&dmac1 0x2d>, <&dmac1 0x2e>; + dma-names = "tx", "rx", "tx", "rx"; power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; status = "disabled"; }; @@ -755,8 +788,9 @@ clocks = <&mstp3_clks R8A7790_CLK_SCIF2>, <&zs_clk>, <&scif_clk>; clock-names = "fck", "brg_int", "scif_clk"; - dmas = <&dmac0 0x2b>, <&dmac0 0x2c>; - dma-names = "tx", "rx"; + dmas = <&dmac0 0x2b>, <&dmac0 0x2c>, + <&dmac1 0x2b>, <&dmac1 0x2c>; + dma-names = "tx", "rx", "tx", "rx"; power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; status = "disabled"; }; @@ -769,8 +803,9 @@ clocks = <&mstp7_clks R8A7790_CLK_HSCIF0>, <&zs_clk>, <&scif_clk>; clock-names = "fck", "brg_int", "scif_clk"; - dmas = <&dmac0 0x39>, <&dmac0 0x3a>; - dma-names = "tx", "rx"; + dmas = <&dmac0 0x39>, <&dmac0 0x3a>, + <&dmac1 0x39>, <&dmac1 0x3a>; + dma-names = "tx", "rx", "tx", "rx"; power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; status = "disabled"; }; @@ -783,8 +818,9 @@ clocks = <&mstp7_clks R8A7790_CLK_HSCIF1>, <&zs_clk>, <&scif_clk>; clock-names = "fck", "brg_int", "scif_clk"; - dmas = <&dmac0 0x4d>, <&dmac0 0x4e>; - dma-names = "tx", "rx"; + dmas = <&dmac0 0x4d>, <&dmac0 0x4e>, + <&dmac1 0x4d>, <&dmac1 0x4e>; + dma-names = "tx", "rx", "tx", "rx"; power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; status = "disabled"; }; @@ -1469,8 +1505,9 @@ reg = <0 0xe6b10000 0 0x2c>; interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp9_clks R8A7790_CLK_QSPI_MOD>; - dmas = <&dmac0 0x17>, <&dmac0 0x18>; - dma-names = "tx", "rx"; + dmas = <&dmac0 0x17>, <&dmac0 0x18>, + <&dmac1 0x17>, <&dmac1 0x18>; + dma-names = "tx", "rx", "tx", "rx"; power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; num-cs = <1>; #address-cells = <1>; @@ -1483,8 +1520,9 @@ reg = <0 0xe6e20000 0 0x0064>; interrupts = <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp0_clks R8A7790_CLK_MSIOF0>; - dmas = <&dmac0 0x51>, <&dmac0 0x52>; - dma-names = "tx", "rx"; + dmas = <&dmac0 0x51>, <&dmac0 0x52>, + <&dmac1 0x51>, <&dmac1 0x52>; + dma-names = "tx", "rx", "tx", "rx"; power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; #address-cells = <1>; #size-cells = <0>; @@ -1496,8 +1534,9 @@ reg = <0 0xe6e10000 0 0x0064>; interrupts = <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp2_clks R8A7790_CLK_MSIOF1>; - dmas = <&dmac0 0x55>, <&dmac0 0x56>; - dma-names = "tx", "rx"; + dmas = <&dmac0 0x55>, <&dmac0 0x56>, + <&dmac1 0x55>, <&dmac1 0x56>; + dma-names = "tx", "rx", "tx", "rx"; power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; #address-cells = <1>; #size-cells = <0>; @@ -1509,8 +1548,9 @@ reg = <0 0xe6e00000 0 0x0064>; interrupts = <GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp2_clks R8A7790_CLK_MSIOF2>; - dmas = <&dmac0 0x41>, <&dmac0 0x42>; - dma-names = "tx", "rx"; + dmas = <&dmac0 0x41>, <&dmac0 0x42>, + <&dmac1 0x41>, <&dmac1 0x42>; + dma-names = "tx", "rx", "tx", "rx"; power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; #address-cells = <1>; #size-cells = <0>; @@ -1522,8 +1562,9 @@ reg = <0 0xe6c90000 0 0x0064>; interrupts = <GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp2_clks R8A7790_CLK_MSIOF3>; - dmas = <&dmac0 0x45>, <&dmac0 0x46>; - dma-names = "tx", "rx"; + dmas = <&dmac0 0x45>, <&dmac0 0x46>, + <&dmac1 0x45>, <&dmac1 0x46>; + dma-names = "tx", "rx", "tx", "rx"; power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; #address-cells = <1>; #size-cells = <0>; @@ -1702,79 +1743,79 @@ status = "disabled"; rcar_sound,dvc { - dvc0: dvc@0 { + dvc0: dvc-0 { dmas = <&audma0 0xbc>; dma-names = "tx"; }; - dvc1: dvc@1 { + dvc1: dvc-1 { dmas = <&audma0 0xbe>; dma-names = "tx"; }; }; rcar_sound,mix { - mix0: mix@0 { }; - mix1: mix@1 { }; + mix0: mix-0 { }; + mix1: mix-1 { }; }; rcar_sound,ctu { - ctu00: ctu@0 { }; - ctu01: ctu@1 { }; - ctu02: ctu@2 { }; - ctu03: ctu@3 { }; - ctu10: ctu@4 { }; - ctu11: ctu@5 { }; - ctu12: ctu@6 { }; - ctu13: ctu@7 { }; + ctu00: ctu-0 { }; + ctu01: ctu-1 { }; + ctu02: ctu-2 { }; + ctu03: ctu-3 { }; + ctu10: ctu-4 { }; + ctu11: ctu-5 { }; + ctu12: ctu-6 { }; + ctu13: ctu-7 { }; }; rcar_sound,src { - src0: src@0 { + src0: src-0 { interrupts = <GIC_SPI 352 IRQ_TYPE_LEVEL_HIGH>; dmas = <&audma0 0x85>, <&audma1 0x9a>; dma-names = "rx", "tx"; }; - src1: src@1 { + src1: src-1 { interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>; dmas = <&audma0 0x87>, <&audma1 0x9c>; dma-names = "rx", "tx"; }; - src2: src@2 { + src2: src-2 { interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>; dmas = <&audma0 0x89>, <&audma1 0x9e>; dma-names = "rx", "tx"; }; - src3: src@3 { + src3: src-3 { interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>; dmas = <&audma0 0x8b>, <&audma1 0xa0>; dma-names = "rx", "tx"; }; - src4: src@4 { + src4: src-4 { interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>; dmas = <&audma0 0x8d>, <&audma1 0xb0>; dma-names = "rx", "tx"; }; - src5: src@5 { + src5: src-5 { interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>; dmas = <&audma0 0x8f>, <&audma1 0xb2>; dma-names = "rx", "tx"; }; - src6: src@6 { + src6: src-6 { interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>; dmas = <&audma0 0x91>, <&audma1 0xb4>; dma-names = "rx", "tx"; }; - src7: src@7 { + src7: src-7 { interrupts = <GIC_SPI 359 IRQ_TYPE_LEVEL_HIGH>; dmas = <&audma0 0x93>, <&audma1 0xb6>; dma-names = "rx", "tx"; }; - src8: src@8 { + src8: src-8 { interrupts = <GIC_SPI 360 IRQ_TYPE_LEVEL_HIGH>; dmas = <&audma0 0x95>, <&audma1 0xb8>; dma-names = "rx", "tx"; }; - src9: src@9 { + src9: src-9 { interrupts = <GIC_SPI 361 IRQ_TYPE_LEVEL_HIGH>; dmas = <&audma0 0x97>, <&audma1 0xba>; dma-names = "rx", "tx"; @@ -1782,52 +1823,52 @@ }; rcar_sound,ssi { - ssi0: ssi@0 { + ssi0: ssi-0 { interrupts = <GIC_SPI 370 IRQ_TYPE_LEVEL_HIGH>; dmas = <&audma0 0x01>, <&audma1 0x02>, <&audma0 0x15>, <&audma1 0x16>; dma-names = "rx", "tx", "rxu", "txu"; }; - ssi1: ssi@1 { + ssi1: ssi-1 { interrupts = <GIC_SPI 371 IRQ_TYPE_LEVEL_HIGH>; dmas = <&audma0 0x03>, <&audma1 0x04>, <&audma0 0x49>, <&audma1 0x4a>; dma-names = "rx", "tx", "rxu", "txu"; }; - ssi2: ssi@2 { + ssi2: ssi-2 { interrupts = <GIC_SPI 372 IRQ_TYPE_LEVEL_HIGH>; dmas = <&audma0 0x05>, <&audma1 0x06>, <&audma0 0x63>, <&audma1 0x64>; dma-names = "rx", "tx", "rxu", "txu"; }; - ssi3: ssi@3 { + ssi3: ssi-3 { interrupts = <GIC_SPI 373 IRQ_TYPE_LEVEL_HIGH>; dmas = <&audma0 0x07>, <&audma1 0x08>, <&audma0 0x6f>, <&audma1 0x70>; dma-names = "rx", "tx", "rxu", "txu"; }; - ssi4: ssi@4 { + ssi4: ssi-4 { interrupts = <GIC_SPI 374 IRQ_TYPE_LEVEL_HIGH>; dmas = <&audma0 0x09>, <&audma1 0x0a>, <&audma0 0x71>, <&audma1 0x72>; dma-names = "rx", "tx", "rxu", "txu"; }; - ssi5: ssi@5 { + ssi5: ssi-5 { interrupts = <GIC_SPI 375 IRQ_TYPE_LEVEL_HIGH>; dmas = <&audma0 0x0b>, <&audma1 0x0c>, <&audma0 0x73>, <&audma1 0x74>; dma-names = "rx", "tx", "rxu", "txu"; }; - ssi6: ssi@6 { + ssi6: ssi-6 { interrupts = <GIC_SPI 376 IRQ_TYPE_LEVEL_HIGH>; dmas = <&audma0 0x0d>, <&audma1 0x0e>, <&audma0 0x75>, <&audma1 0x76>; dma-names = "rx", "tx", "rxu", "txu"; }; - ssi7: ssi@7 { + ssi7: ssi-7 { interrupts = <GIC_SPI 377 IRQ_TYPE_LEVEL_HIGH>; dmas = <&audma0 0x0f>, <&audma1 0x10>, <&audma0 0x79>, <&audma1 0x7a>; dma-names = "rx", "tx", "rxu", "txu"; }; - ssi8: ssi@8 { + ssi8: ssi-8 { interrupts = <GIC_SPI 378 IRQ_TYPE_LEVEL_HIGH>; dmas = <&audma0 0x11>, <&audma1 0x12>, <&audma0 0x7b>, <&audma1 0x7c>; dma-names = "rx", "tx", "rxu", "txu"; }; - ssi9: ssi@9 { + ssi9: ssi-9 { interrupts = <GIC_SPI 379 IRQ_TYPE_LEVEL_HIGH>; dmas = <&audma0 0x13>, <&audma1 0x14>, <&audma0 0x7d>, <&audma1 0x7e>; dma-names = "rx", "tx", "rxu", "txu"; diff --git a/arch/arm/boot/dts/r8a7791-koelsch.dts b/arch/arm/boot/dts/r8a7791-koelsch.dts index da59c2844..f8a7d090f 100644 --- a/arch/arm/boot/dts/r8a7791-koelsch.dts +++ b/arch/arm/boot/dts/r8a7791-koelsch.dts @@ -170,7 +170,7 @@ }; }; - vcc_sdhi0: regulator@0 { + vcc_sdhi0: regulator-vcc-sdhi0 { compatible = "regulator-fixed"; regulator-name = "SDHI0 Vcc"; @@ -181,7 +181,7 @@ enable-active-high; }; - vccq_sdhi0: regulator@1 { + vccq_sdhi0: regulator-vccq-sdhi0 { compatible = "regulator-gpio"; regulator-name = "SDHI0 VccQ"; @@ -194,7 +194,7 @@ 1800000 0>; }; - vcc_sdhi1: regulator@2 { + vcc_sdhi1: regulator-vcc-sdhi1 { compatible = "regulator-fixed"; regulator-name = "SDHI1 Vcc"; @@ -205,7 +205,7 @@ enable-active-high; }; - vccq_sdhi1: regulator@3 { + vccq_sdhi1: regulator-vccq-sdhi1 { compatible = "regulator-gpio"; regulator-name = "SDHI1 VccQ"; @@ -218,7 +218,7 @@ 1800000 0>; }; - vcc_sdhi2: regulator@4 { + vcc_sdhi2: regulator-vcc-sdhi2 { compatible = "regulator-fixed"; regulator-name = "SDHI2 Vcc"; @@ -229,7 +229,7 @@ enable-active-high; }; - vccq_sdhi2: regulator@5 { + vccq_sdhi2: regulator-vccq-sdhi2 { compatible = "regulator-gpio"; regulator-name = "SDHI2 VccQ"; @@ -332,12 +332,12 @@ function = "du"; }; - scif0_pins: serial0 { + scif0_pins: scif0 { groups = "scif0_data_d"; function = "scif0"; }; - scif1_pins: serial1 { + scif1_pins: scif1 { groups = "scif1_data_d"; function = "scif1"; }; @@ -372,12 +372,12 @@ function = "sdhi2"; }; - qspi_pins: spi0 { + qspi_pins: qspi { groups = "qspi_ctrl", "qspi_data4"; function = "qspi"; }; - msiof0_pins: spi1 { + msiof0_pins: msiof0 { groups = "msiof0_clk", "msiof0_sync", "msiof0_rx", "msiof0_tx"; function = "msiof0"; diff --git a/arch/arm/boot/dts/r8a7791-porter.dts b/arch/arm/boot/dts/r8a7791-porter.dts index 6a1bb1a82..6761d11d3 100644 --- a/arch/arm/boot/dts/r8a7791-porter.dts +++ b/arch/arm/boot/dts/r8a7791-porter.dts @@ -46,7 +46,7 @@ reg = <2 0x00000000 0 0x40000000>; }; - vcc_sdhi0: regulator@0 { + vcc_sdhi0: regulator-vcc-sdhi0 { compatible = "regulator-fixed"; regulator-name = "SDHI0 Vcc"; @@ -55,7 +55,7 @@ regulator-always-on; }; - vccq_sdhi0: regulator@1 { + vccq_sdhi0: regulator-vccq-sdhi0 { compatible = "regulator-gpio"; regulator-name = "SDHI0 VccQ"; @@ -68,7 +68,7 @@ 1800000 0>; }; - vcc_sdhi2: regulator@2 { + vcc_sdhi2: regulator-vcc-sdhi2 { compatible = "regulator-fixed"; regulator-name = "SDHI2 Vcc"; @@ -77,7 +77,7 @@ regulator-always-on; }; - vccq_sdhi2: regulator@3 { + vccq_sdhi2: regulator-vccq-sdhi2 { compatible = "regulator-gpio"; regulator-name = "SDHI2 VccQ"; @@ -142,7 +142,7 @@ }; &pfc { - scif0_pins: serial0 { + scif0_pins: scif0 { groups = "scif0_data_d"; function = "scif0"; }; @@ -167,7 +167,7 @@ function = "sdhi2"; }; - qspi_pins: spi0 { + qspi_pins: qspi { groups = "qspi_ctrl", "qspi_data4"; function = "qspi"; }; diff --git a/arch/arm/boot/dts/r8a7791.dtsi b/arch/arm/boot/dts/r8a7791.dtsi index db67e342c..8f0086bbd 100644 --- a/arch/arm/boot/dts/r8a7791.dtsi +++ b/arch/arm/boot/dts/r8a7791.dtsi @@ -43,6 +43,7 @@ cpus { #address-cells = <1>; #size-cells = <0>; + enable-method = "renesas,apmu"; cpu0: cpu@0 { device_type = "cpu"; @@ -72,6 +73,14 @@ power-domains = <&sysc R8A7791_PD_CA15_CPU1>; next-level-cache = <&L2_CA15>; }; + + L2_CA15: cache-controller@0 { + compatible = "cache"; + reg = <0>; + power-domains = <&sysc R8A7791_PD_CA15_SCU>; + cache-unified; + cache-level = <2>; + }; }; thermal-zones { @@ -93,11 +102,10 @@ }; }; - L2_CA15: cache-controller@0 { - compatible = "cache"; - power-domains = <&sysc R8A7791_PD_CA15_SCU>; - cache-unified; - cache-level = <2>; + apmu@e6152000 { + compatible = "renesas,r8a7791-apmu", "renesas,apmu"; + reg = <0 0xe6152000 0 0x188>; + cpus = <&cpu0 &cpu1>; }; gic: interrupt-controller@f1001000 { @@ -514,8 +522,9 @@ reg = <0 0xe60b0000 0 0x425>; interrupts = <GIC_SPI 173 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp9_clks R8A7791_CLK_IICDVFS>; - dmas = <&dmac0 0x77>, <&dmac0 0x78>; - dma-names = "tx", "rx"; + dmas = <&dmac0 0x77>, <&dmac0 0x78>, + <&dmac1 0x77>, <&dmac1 0x78>; + dma-names = "tx", "rx", "tx", "rx"; power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; status = "disabled"; }; @@ -527,8 +536,9 @@ reg = <0 0xe6500000 0 0x425>; interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp3_clks R8A7791_CLK_IIC0>; - dmas = <&dmac0 0x61>, <&dmac0 0x62>; - dma-names = "tx", "rx"; + dmas = <&dmac0 0x61>, <&dmac0 0x62>, + <&dmac1 0x61>, <&dmac1 0x62>; + dma-names = "tx", "rx", "tx", "rx"; power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; status = "disabled"; }; @@ -540,8 +550,9 @@ reg = <0 0xe6510000 0 0x425>; interrupts = <GIC_SPI 175 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp3_clks R8A7791_CLK_IIC1>; - dmas = <&dmac0 0x65>, <&dmac0 0x66>; - dma-names = "tx", "rx"; + dmas = <&dmac0 0x65>, <&dmac0 0x66>, + <&dmac1 0x65>, <&dmac1 0x66>; + dma-names = "tx", "rx", "tx", "rx"; power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; status = "disabled"; }; @@ -556,8 +567,9 @@ reg = <0 0xee200000 0 0x80>; interrupts = <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp3_clks R8A7791_CLK_MMCIF0>; - dmas = <&dmac0 0xd1>, <&dmac0 0xd2>; - dma-names = "tx", "rx"; + dmas = <&dmac0 0xd1>, <&dmac0 0xd2>, + <&dmac1 0xd1>, <&dmac1 0xd2>; + dma-names = "tx", "rx", "tx", "rx"; power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; reg-io-width = <4>; status = "disabled"; @@ -569,8 +581,9 @@ reg = <0 0xee100000 0 0x328>; interrupts = <GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp3_clks R8A7791_CLK_SDHI0>; - dmas = <&dmac1 0xcd>, <&dmac1 0xce>; - dma-names = "tx", "rx"; + dmas = <&dmac0 0xcd>, <&dmac0 0xce>, + <&dmac1 0xcd>, <&dmac1 0xce>; + dma-names = "tx", "rx", "tx", "rx"; power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; status = "disabled"; }; @@ -580,8 +593,9 @@ reg = <0 0xee140000 0 0x100>; interrupts = <GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp3_clks R8A7791_CLK_SDHI1>; - dmas = <&dmac1 0xc1>, <&dmac1 0xc2>; - dma-names = "tx", "rx"; + dmas = <&dmac0 0xc1>, <&dmac0 0xc2>, + <&dmac1 0xc1>, <&dmac1 0xc2>; + dma-names = "tx", "rx", "tx", "rx"; power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; status = "disabled"; }; @@ -591,8 +605,9 @@ reg = <0 0xee160000 0 0x100>; interrupts = <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp3_clks R8A7791_CLK_SDHI2>; - dmas = <&dmac1 0xd3>, <&dmac1 0xd4>; - dma-names = "tx", "rx"; + dmas = <&dmac0 0xd3>, <&dmac0 0xd4>, + <&dmac1 0xd3>, <&dmac1 0xd4>; + dma-names = "tx", "rx", "tx", "rx"; power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; status = "disabled"; }; @@ -604,8 +619,9 @@ interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp2_clks R8A7791_CLK_SCIFA0>; clock-names = "fck"; - dmas = <&dmac0 0x21>, <&dmac0 0x22>; - dma-names = "tx", "rx"; + dmas = <&dmac0 0x21>, <&dmac0 0x22>, + <&dmac1 0x21>, <&dmac1 0x22>; + dma-names = "tx", "rx", "tx", "rx"; power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; status = "disabled"; }; @@ -617,8 +633,9 @@ interrupts = <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp2_clks R8A7791_CLK_SCIFA1>; clock-names = "fck"; - dmas = <&dmac0 0x25>, <&dmac0 0x26>; - dma-names = "tx", "rx"; + dmas = <&dmac0 0x25>, <&dmac0 0x26>, + <&dmac1 0x25>, <&dmac1 0x26>; + dma-names = "tx", "rx", "tx", "rx"; power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; status = "disabled"; }; @@ -630,8 +647,9 @@ interrupts = <GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp2_clks R8A7791_CLK_SCIFA2>; clock-names = "fck"; - dmas = <&dmac0 0x27>, <&dmac0 0x28>; - dma-names = "tx", "rx"; + dmas = <&dmac0 0x27>, <&dmac0 0x28>, + <&dmac1 0x27>, <&dmac1 0x28>; + dma-names = "tx", "rx", "tx", "rx"; power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; status = "disabled"; }; @@ -643,8 +661,9 @@ interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp11_clks R8A7791_CLK_SCIFA3>; clock-names = "fck"; - dmas = <&dmac0 0x1b>, <&dmac0 0x1c>; - dma-names = "tx", "rx"; + dmas = <&dmac0 0x1b>, <&dmac0 0x1c>, + <&dmac1 0x1b>, <&dmac1 0x1c>; + dma-names = "tx", "rx", "tx", "rx"; power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; status = "disabled"; }; @@ -656,8 +675,9 @@ interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp11_clks R8A7791_CLK_SCIFA4>; clock-names = "fck"; - dmas = <&dmac0 0x1f>, <&dmac0 0x20>; - dma-names = "tx", "rx"; + dmas = <&dmac0 0x1f>, <&dmac0 0x20>, + <&dmac1 0x1f>, <&dmac1 0x20>; + dma-names = "tx", "rx", "tx", "rx"; power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; status = "disabled"; }; @@ -669,8 +689,9 @@ interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp11_clks R8A7791_CLK_SCIFA5>; clock-names = "fck"; - dmas = <&dmac0 0x23>, <&dmac0 0x24>; - dma-names = "tx", "rx"; + dmas = <&dmac0 0x23>, <&dmac0 0x24>, + <&dmac1 0x23>, <&dmac1 0x24>; + dma-names = "tx", "rx", "tx", "rx"; power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; status = "disabled"; }; @@ -682,8 +703,9 @@ interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp2_clks R8A7791_CLK_SCIFB0>; clock-names = "fck"; - dmas = <&dmac0 0x3d>, <&dmac0 0x3e>; - dma-names = "tx", "rx"; + dmas = <&dmac0 0x3d>, <&dmac0 0x3e>, + <&dmac1 0x3d>, <&dmac1 0x3e>; + dma-names = "tx", "rx", "tx", "rx"; power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; status = "disabled"; }; @@ -695,8 +717,9 @@ interrupts = <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp2_clks R8A7791_CLK_SCIFB1>; clock-names = "fck"; - dmas = <&dmac0 0x19>, <&dmac0 0x1a>; - dma-names = "tx", "rx"; + dmas = <&dmac0 0x19>, <&dmac0 0x1a>, + <&dmac1 0x19>, <&dmac1 0x1a>; + dma-names = "tx", "rx", "tx", "rx"; power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; status = "disabled"; }; @@ -708,8 +731,9 @@ interrupts = <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp2_clks R8A7791_CLK_SCIFB2>; clock-names = "fck"; - dmas = <&dmac0 0x1d>, <&dmac0 0x1e>; - dma-names = "tx", "rx"; + dmas = <&dmac0 0x1d>, <&dmac0 0x1e>, + <&dmac1 0x1d>, <&dmac1 0x1e>; + dma-names = "tx", "rx", "tx", "rx"; power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; status = "disabled"; }; @@ -722,8 +746,9 @@ clocks = <&mstp7_clks R8A7791_CLK_SCIF0>, <&zs_clk>, <&scif_clk>; clock-names = "fck", "brg_int", "scif_clk"; - dmas = <&dmac0 0x29>, <&dmac0 0x2a>; - dma-names = "tx", "rx"; + dmas = <&dmac0 0x29>, <&dmac0 0x2a>, + <&dmac1 0x29>, <&dmac1 0x2a>; + dma-names = "tx", "rx", "tx", "rx"; power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; status = "disabled"; }; @@ -736,8 +761,9 @@ clocks = <&mstp7_clks R8A7791_CLK_SCIF1>, <&zs_clk>, <&scif_clk>; clock-names = "fck", "brg_int", "scif_clk"; - dmas = <&dmac0 0x2d>, <&dmac0 0x2e>; - dma-names = "tx", "rx"; + dmas = <&dmac0 0x2d>, <&dmac0 0x2e>, + <&dmac1 0x2d>, <&dmac1 0x2e>; + dma-names = "tx", "rx", "tx", "rx"; power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; status = "disabled"; }; @@ -750,8 +776,9 @@ clocks = <&mstp7_clks R8A7791_CLK_SCIF2>, <&zs_clk>, <&scif_clk>; clock-names = "fck", "brg_int", "scif_clk"; - dmas = <&dmac0 0x2b>, <&dmac0 0x2c>; - dma-names = "tx", "rx"; + dmas = <&dmac0 0x2b>, <&dmac0 0x2c>, + <&dmac1 0x2b>, <&dmac1 0x2c>; + dma-names = "tx", "rx", "tx", "rx"; power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; status = "disabled"; }; @@ -764,8 +791,9 @@ clocks = <&mstp7_clks R8A7791_CLK_SCIF3>, <&zs_clk>, <&scif_clk>; clock-names = "fck", "brg_int", "scif_clk"; - dmas = <&dmac0 0x2f>, <&dmac0 0x30>; - dma-names = "tx", "rx"; + dmas = <&dmac0 0x2f>, <&dmac0 0x30>, + <&dmac1 0x2f>, <&dmac1 0x30>; + dma-names = "tx", "rx", "tx", "rx"; power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; status = "disabled"; }; @@ -778,8 +806,9 @@ clocks = <&mstp7_clks R8A7791_CLK_SCIF4>, <&zs_clk>, <&scif_clk>; clock-names = "fck", "brg_int", "scif_clk"; - dmas = <&dmac0 0xfb>, <&dmac0 0xfc>; - dma-names = "tx", "rx"; + dmas = <&dmac0 0xfb>, <&dmac0 0xfc>, + <&dmac1 0xfb>, <&dmac1 0xfc>; + dma-names = "tx", "rx", "tx", "rx"; power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; status = "disabled"; }; @@ -792,8 +821,9 @@ clocks = <&mstp7_clks R8A7791_CLK_SCIF5>, <&zs_clk>, <&scif_clk>; clock-names = "fck", "brg_int", "scif_clk"; - dmas = <&dmac0 0xfd>, <&dmac0 0xfe>; - dma-names = "tx", "rx"; + dmas = <&dmac0 0xfd>, <&dmac0 0xfe>, + <&dmac1 0xfd>, <&dmac1 0xfe>; + dma-names = "tx", "rx", "tx", "rx"; power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; status = "disabled"; }; @@ -806,8 +836,9 @@ clocks = <&mstp7_clks R8A7791_CLK_HSCIF0>, <&zs_clk>, <&scif_clk>; clock-names = "fck", "brg_int", "scif_clk"; - dmas = <&dmac0 0x39>, <&dmac0 0x3a>; - dma-names = "tx", "rx"; + dmas = <&dmac0 0x39>, <&dmac0 0x3a>, + <&dmac1 0x39>, <&dmac1 0x3a>; + dma-names = "tx", "rx", "tx", "rx"; power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; status = "disabled"; }; @@ -820,8 +851,9 @@ clocks = <&mstp7_clks R8A7791_CLK_HSCIF1>, <&zs_clk>, <&scif_clk>; clock-names = "fck", "brg_int", "scif_clk"; - dmas = <&dmac0 0x4d>, <&dmac0 0x4e>; - dma-names = "tx", "rx"; + dmas = <&dmac0 0x4d>, <&dmac0 0x4e>, + <&dmac1 0x4d>, <&dmac1 0x4e>; + dma-names = "tx", "rx", "tx", "rx"; power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; status = "disabled"; }; @@ -834,8 +866,9 @@ clocks = <&mstp7_clks R8A7791_CLK_HSCIF2>, <&zs_clk>, <&scif_clk>; clock-names = "fck", "brg_int", "scif_clk"; - dmas = <&dmac0 0x3b>, <&dmac0 0x3c>; - dma-names = "tx", "rx"; + dmas = <&dmac0 0x3b>, <&dmac0 0x3c>, + <&dmac1 0x3b>, <&dmac1 0x3c>; + dma-names = "tx", "rx", "tx", "rx"; power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; status = "disabled"; }; @@ -1478,8 +1511,9 @@ reg = <0 0xe6b10000 0 0x2c>; interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp9_clks R8A7791_CLK_QSPI_MOD>; - dmas = <&dmac0 0x17>, <&dmac0 0x18>; - dma-names = "tx", "rx"; + dmas = <&dmac0 0x17>, <&dmac0 0x18>, + <&dmac1 0x17>, <&dmac1 0x18>; + dma-names = "tx", "rx", "tx", "rx"; power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; num-cs = <1>; #address-cells = <1>; @@ -1492,8 +1526,9 @@ reg = <0 0xe6e20000 0 0x0064>; interrupts = <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp0_clks R8A7791_CLK_MSIOF0>; - dmas = <&dmac0 0x51>, <&dmac0 0x52>; - dma-names = "tx", "rx"; + dmas = <&dmac0 0x51>, <&dmac0 0x52>, + <&dmac1 0x51>, <&dmac1 0x52>; + dma-names = "tx", "rx", "tx", "rx"; power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; #address-cells = <1>; #size-cells = <0>; @@ -1505,8 +1540,9 @@ reg = <0 0xe6e10000 0 0x0064>; interrupts = <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp2_clks R8A7791_CLK_MSIOF1>; - dmas = <&dmac0 0x55>, <&dmac0 0x56>; - dma-names = "tx", "rx"; + dmas = <&dmac0 0x55>, <&dmac0 0x56>, + <&dmac1 0x55>, <&dmac1 0x56>; + dma-names = "tx", "rx", "tx", "rx"; power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; #address-cells = <1>; #size-cells = <0>; @@ -1518,8 +1554,9 @@ reg = <0 0xe6e00000 0 0x0064>; interrupts = <GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp2_clks R8A7791_CLK_MSIOF2>; - dmas = <&dmac0 0x41>, <&dmac0 0x42>; - dma-names = "tx", "rx"; + dmas = <&dmac0 0x41>, <&dmac0 0x42>, + <&dmac1 0x41>, <&dmac1 0x42>; + dma-names = "tx", "rx", "tx", "rx"; power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; #address-cells = <1>; #size-cells = <0>; @@ -1737,79 +1774,79 @@ status = "disabled"; rcar_sound,dvc { - dvc0: dvc@0 { + dvc0: dvc-0 { dmas = <&audma0 0xbc>; dma-names = "tx"; }; - dvc1: dvc@1 { + dvc1: dvc-1 { dmas = <&audma0 0xbe>; dma-names = "tx"; }; }; rcar_sound,mix { - mix0: mix@0 { }; - mix1: mix@1 { }; + mix0: mix-0 { }; + mix1: mix-1 { }; }; rcar_sound,ctu { - ctu00: ctu@0 { }; - ctu01: ctu@1 { }; - ctu02: ctu@2 { }; - ctu03: ctu@3 { }; - ctu10: ctu@4 { }; - ctu11: ctu@5 { }; - ctu12: ctu@6 { }; - ctu13: ctu@7 { }; + ctu00: ctu-0 { }; + ctu01: ctu-1 { }; + ctu02: ctu-2 { }; + ctu03: ctu-3 { }; + ctu10: ctu-4 { }; + ctu11: ctu-5 { }; + ctu12: ctu-6 { }; + ctu13: ctu-7 { }; }; rcar_sound,src { - src0: src@0 { + src0: src-0 { interrupts = <GIC_SPI 352 IRQ_TYPE_LEVEL_HIGH>; dmas = <&audma0 0x85>, <&audma1 0x9a>; dma-names = "rx", "tx"; }; - src1: src@1 { + src1: src-1 { interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>; dmas = <&audma0 0x87>, <&audma1 0x9c>; dma-names = "rx", "tx"; }; - src2: src@2 { + src2: src-2 { interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>; dmas = <&audma0 0x89>, <&audma1 0x9e>; dma-names = "rx", "tx"; }; - src3: src@3 { + src3: src-3 { interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>; dmas = <&audma0 0x8b>, <&audma1 0xa0>; dma-names = "rx", "tx"; }; - src4: src@4 { + src4: src-4 { interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>; dmas = <&audma0 0x8d>, <&audma1 0xb0>; dma-names = "rx", "tx"; }; - src5: src@5 { + src5: src-5 { interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>; dmas = <&audma0 0x8f>, <&audma1 0xb2>; dma-names = "rx", "tx"; }; - src6: src@6 { + src6: src-6 { interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>; dmas = <&audma0 0x91>, <&audma1 0xb4>; dma-names = "rx", "tx"; }; - src7: src@7 { + src7: src-7 { interrupts = <GIC_SPI 359 IRQ_TYPE_LEVEL_HIGH>; dmas = <&audma0 0x93>, <&audma1 0xb6>; dma-names = "rx", "tx"; }; - src8: src@8 { + src8: src-8 { interrupts = <GIC_SPI 360 IRQ_TYPE_LEVEL_HIGH>; dmas = <&audma0 0x95>, <&audma1 0xb8>; dma-names = "rx", "tx"; }; - src9: src@9 { + src9: src-9 { interrupts = <GIC_SPI 361 IRQ_TYPE_LEVEL_HIGH>; dmas = <&audma0 0x97>, <&audma1 0xba>; dma-names = "rx", "tx"; @@ -1817,52 +1854,52 @@ }; rcar_sound,ssi { - ssi0: ssi@0 { + ssi0: ssi-0 { interrupts = <GIC_SPI 370 IRQ_TYPE_LEVEL_HIGH>; dmas = <&audma0 0x01>, <&audma1 0x02>, <&audma0 0x15>, <&audma1 0x16>; dma-names = "rx", "tx", "rxu", "txu"; }; - ssi1: ssi@1 { + ssi1: ssi-1 { interrupts = <GIC_SPI 371 IRQ_TYPE_LEVEL_HIGH>; dmas = <&audma0 0x03>, <&audma1 0x04>, <&audma0 0x49>, <&audma1 0x4a>; dma-names = "rx", "tx", "rxu", "txu"; }; - ssi2: ssi@2 { + ssi2: ssi-2 { interrupts = <GIC_SPI 372 IRQ_TYPE_LEVEL_HIGH>; dmas = <&audma0 0x05>, <&audma1 0x06>, <&audma0 0x63>, <&audma1 0x64>; dma-names = "rx", "tx", "rxu", "txu"; }; - ssi3: ssi@3 { + ssi3: ssi-3 { interrupts = <GIC_SPI 373 IRQ_TYPE_LEVEL_HIGH>; dmas = <&audma0 0x07>, <&audma1 0x08>, <&audma0 0x6f>, <&audma1 0x70>; dma-names = "rx", "tx", "rxu", "txu"; }; - ssi4: ssi@4 { + ssi4: ssi-4 { interrupts = <GIC_SPI 374 IRQ_TYPE_LEVEL_HIGH>; dmas = <&audma0 0x09>, <&audma1 0x0a>, <&audma0 0x71>, <&audma1 0x72>; dma-names = "rx", "tx", "rxu", "txu"; }; - ssi5: ssi@5 { + ssi5: ssi-5 { interrupts = <GIC_SPI 375 IRQ_TYPE_LEVEL_HIGH>; dmas = <&audma0 0x0b>, <&audma1 0x0c>, <&audma0 0x73>, <&audma1 0x74>; dma-names = "rx", "tx", "rxu", "txu"; }; - ssi6: ssi@6 { + ssi6: ssi-6 { interrupts = <GIC_SPI 376 IRQ_TYPE_LEVEL_HIGH>; dmas = <&audma0 0x0d>, <&audma1 0x0e>, <&audma0 0x75>, <&audma1 0x76>; dma-names = "rx", "tx", "rxu", "txu"; }; - ssi7: ssi@7 { + ssi7: ssi-7 { interrupts = <GIC_SPI 377 IRQ_TYPE_LEVEL_HIGH>; dmas = <&audma0 0x0f>, <&audma1 0x10>, <&audma0 0x79>, <&audma1 0x7a>; dma-names = "rx", "tx", "rxu", "txu"; }; - ssi8: ssi@8 { + ssi8: ssi-8 { interrupts = <GIC_SPI 378 IRQ_TYPE_LEVEL_HIGH>; dmas = <&audma0 0x11>, <&audma1 0x12>, <&audma0 0x7b>, <&audma1 0x7c>; dma-names = "rx", "tx", "rxu", "txu"; }; - ssi9: ssi@9 { + ssi9: ssi-9 { interrupts = <GIC_SPI 379 IRQ_TYPE_LEVEL_HIGH>; dmas = <&audma0 0x13>, <&audma1 0x14>, <&audma0 0x7d>, <&audma1 0x7e>; dma-names = "rx", "tx", "rxu", "txu"; diff --git a/arch/arm/boot/dts/r8a7792-blanche.dts b/arch/arm/boot/dts/r8a7792-blanche.dts new file mode 100644 index 000000000..e7b40f0e7 --- /dev/null +++ b/arch/arm/boot/dts/r8a7792-blanche.dts @@ -0,0 +1,66 @@ +/* + * Device Tree Source for the Blanche board + * + * Copyright (C) 2014 Renesas Electronics Corporation + * Copyright (C) 2016 Cogent Embedded, Inc. + * + * This file is licensed under the terms of the GNU General Public License + * version 2. This program is licensed "as is" without any warranty of any + * kind, whether express or implied. + */ + +/dts-v1/; +#include "r8a7792.dtsi" + +/ { + model = "Blanche"; + compatible = "renesas,blanche", "renesas,r8a7792"; + + aliases { + serial0 = &scif0; + serial1 = &scif3; + }; + + chosen { + bootargs = "ignore_loglevel rw root=/dev/nfs ip=dhcp"; + stdout-path = "serial0:115200n8"; + }; + + memory@40000000 { + device_type = "memory"; + reg = <0 0x40000000 0 0x40000000>; + }; + + d3_3v: regulator-3v3 { + compatible = "regulator-fixed"; + regulator-name = "D3.3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + + ethernet@18000000 { + compatible = "smsc,lan89218", "smsc,lan9115"; + reg = <0 0x18000000 0 0x100>; + phy-mode = "mii"; + interrupt-parent = <&irqc>; + interrupts = <0 IRQ_TYPE_EDGE_FALLING>; + smsc,irq-push-pull; + reg-io-width = <4>; + vddvario-supply = <&d3_3v>; + vdd33a-supply = <&d3_3v>; + }; +}; + +&extal_clk { + clock-frequency = <20000000>; +}; + +&scif0 { + status = "okay"; +}; + +&scif3 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/r8a7792.dtsi b/arch/arm/boot/dts/r8a7792.dtsi new file mode 100644 index 000000000..3fd61d7ab --- /dev/null +++ b/arch/arm/boot/dts/r8a7792.dtsi @@ -0,0 +1,385 @@ +/* + * Device Tree Source for the r8a7792 SoC + * + * Copyright (C) 2016 Cogent Embedded Inc. + * + * This file is licensed under the terms of the GNU General Public License + * version 2. This program is licensed "as is" without any warranty of any + * kind, whether express or implied. + */ + +#include <dt-bindings/clock/r8a7792-clock.h> +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/power/r8a7792-sysc.h> + +/ { + compatible = "renesas,r8a7792"; + #address-cells = <2>; + #size-cells = <2>; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + enable-method = "renesas,apmu"; + + cpu0: cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a15"; + reg = <0>; + clock-frequency = <1000000000>; + clocks = <&cpg_clocks R8A7792_CLK_Z>; + power-domains = <&sysc R8A7792_PD_CA15_CPU0>; + next-level-cache = <&L2_CA15>; + }; + + cpu1: cpu@1 { + device_type = "cpu"; + compatible = "arm,cortex-a15"; + reg = <1>; + clock-frequency = <1000000000>; + power-domains = <&sysc R8A7792_PD_CA15_CPU1>; + next-level-cache = <&L2_CA15>; + }; + + L2_CA15: cache-controller@0 { + compatible = "cache"; + reg = <0>; + cache-unified; + cache-level = <2>; + power-domains = <&sysc R8A7792_PD_CA15_SCU>; + }; + }; + + soc { + compatible = "simple-bus"; + interrupt-parent = <&gic>; + + #address-cells = <2>; + #size-cells = <2>; + ranges; + + apmu@e6152000 { + compatible = "renesas,r8a7792-apmu", "renesas,apmu"; + reg = <0 0xe6152000 0 0x188>; + cpus = <&cpu0 &cpu1>; + }; + + gic: interrupt-controller@f1001000 { + compatible = "arm,gic-400"; + #interrupt-cells = <3>; + interrupt-controller; + reg = <0 0xf1001000 0 0x1000>, + <0 0xf1002000 0 0x1000>, + <0 0xf1004000 0 0x2000>, + <0 0xf1006000 0 0x2000>; + interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(2) | + IRQ_TYPE_LEVEL_HIGH)>; + }; + + irqc: interrupt-controller@e61c0000 { + compatible = "renesas,irqc-r8a7792", "renesas,irqc"; + #interrupt-cells = <2>; + interrupt-controller; + reg = <0 0xe61c0000 0 0x200>; + interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp4_clks R8A7792_CLK_IRQC>; + power-domains = <&sysc R8A7792_PD_ALWAYS_ON>; + }; + + timer { + compatible = "arm,armv7-timer"; + interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | + IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | + IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | + IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | + IRQ_TYPE_LEVEL_LOW)>; + }; + + sysc: system-controller@e6180000 { + compatible = "renesas,r8a7792-sysc"; + reg = <0 0xe6180000 0 0x0200>; + #power-domain-cells = <1>; + }; + + dmac0: dma-controller@e6700000 { + compatible = "renesas,dmac-r8a7792", + "renesas,rcar-dmac"; + reg = <0 0xe6700000 0 0x20000>; + interrupts = <GIC_SPI 197 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 213 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 214 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "error", + "ch0", "ch1", "ch2", "ch3", + "ch4", "ch5", "ch6", "ch7", + "ch8", "ch9", "ch10", "ch11", + "ch12", "ch13", "ch14"; + clocks = <&mstp2_clks R8A7792_CLK_SYS_DMAC0>; + clock-names = "fck"; + power-domains = <&sysc R8A7792_PD_ALWAYS_ON>; + #dma-cells = <1>; + dma-channels = <15>; + }; + + dmac1: dma-controller@e6720000 { + compatible = "renesas,dmac-r8a7792", + "renesas,rcar-dmac"; + reg = <0 0xe6720000 0 0x20000>; + interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 310 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 311 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 313 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "error", + "ch0", "ch1", "ch2", "ch3", + "ch4", "ch5", "ch6", "ch7", + "ch8", "ch9", "ch10", "ch11", + "ch12", "ch13", "ch14"; + clocks = <&mstp2_clks R8A7792_CLK_SYS_DMAC1>; + clock-names = "fck"; + power-domains = <&sysc R8A7792_PD_ALWAYS_ON>; + #dma-cells = <1>; + dma-channels = <15>; + }; + + scif0: serial@e6e60000 { + compatible = "renesas,scif-r8a7792", + "renesas,rcar-gen2-scif", "renesas,scif"; + reg = <0 0xe6e60000 0 64>; + interrupts = <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp7_clks R8A7792_CLK_SCIF0>, <&zs_clk>, + <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; + dmas = <&dmac0 0x29>, <&dmac0 0x2a>, + <&dmac1 0x29>, <&dmac1 0x2a>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A7792_PD_ALWAYS_ON>; + status = "disabled"; + }; + + scif1: serial@e6e68000 { + compatible = "renesas,scif-r8a7792", + "renesas,rcar-gen2-scif", "renesas,scif"; + reg = <0 0xe6e68000 0 64>; + interrupts = <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp7_clks R8A7792_CLK_SCIF1>, <&zs_clk>, + <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; + dmas = <&dmac0 0x2d>, <&dmac0 0x2e>, + <&dmac1 0x2d>, <&dmac1 0x2e>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A7792_PD_ALWAYS_ON>; + status = "disabled"; + }; + + scif2: serial@e6e58000 { + compatible = "renesas,scif-r8a7792", + "renesas,rcar-gen2-scif", "renesas,scif"; + reg = <0 0xe6e58000 0 64>; + interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp7_clks R8A7792_CLK_SCIF2>, <&zs_clk>, + <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; + dmas = <&dmac0 0x2b>, <&dmac0 0x2c>, + <&dmac1 0x2b>, <&dmac1 0x2c>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A7792_PD_ALWAYS_ON>; + status = "disabled"; + }; + + scif3: serial@e6ea8000 { + compatible = "renesas,scif-r8a7792", + "renesas,rcar-gen2-scif", "renesas,scif"; + reg = <0 0xe6ea8000 0 64>; + interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp7_clks R8A7792_CLK_SCIF3>, <&zs_clk>, + <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; + dmas = <&dmac0 0x2f>, <&dmac0 0x30>, + <&dmac1 0x2f>, <&dmac1 0x30>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A7792_PD_ALWAYS_ON>; + status = "disabled"; + }; + + hscif0: serial@e62c0000 { + compatible = "renesas,hscif-r8a7792", + "renesas,rcar-gen2-hscif", "renesas,hscif"; + reg = <0 0xe62c0000 0 96>; + interrupts = <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp7_clks R8A7792_CLK_HSCIF0>, <&zs_clk>, + <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; + dmas = <&dmac0 0x39>, <&dmac0 0x3a>, + <&dmac1 0x39>, <&dmac1 0x3a>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A7792_PD_ALWAYS_ON>; + status = "disabled"; + }; + + hscif1: serial@e62c8000 { + compatible = "renesas,hscif-r8a7792", + "renesas,rcar-gen2-hscif", "renesas,hscif"; + reg = <0 0xe62c8000 0 96>; + interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp7_clks R8A7792_CLK_HSCIF1>, <&zs_clk>, + <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; + dmas = <&dmac0 0x4d>, <&dmac0 0x4e>, + <&dmac1 0x4d>, <&dmac1 0x4e>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A7792_PD_ALWAYS_ON>; + status = "disabled"; + }; + + jpu: jpeg-codec@fe980000 { + compatible = "renesas,jpu-r8a7792", + "renesas,rcar-gen2-jpu"; + reg = <0 0xfe980000 0 0x10300>; + interrupts = <GIC_SPI 272 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp1_clks R8A7792_CLK_JPU>; + power-domains = <&sysc R8A7792_PD_ALWAYS_ON>; + }; + + /* Special CPG clocks */ + cpg_clocks: cpg_clocks@e6150000 { + compatible = "renesas,r8a7792-cpg-clocks", + "renesas,rcar-gen2-cpg-clocks"; + reg = <0 0xe6150000 0 0x1000>; + clocks = <&extal_clk>; + #clock-cells = <1>; + clock-output-names = "main", "pll0", "pll1", "pll3", + "lb", "qspi", "z"; + #power-domain-cells = <0>; + }; + + /* Fixed factor clocks */ + pll1_div2_clk: pll1_div2 { + compatible = "fixed-factor-clock"; + clocks = <&cpg_clocks R8A7792_CLK_PLL1>; + #clock-cells = <0>; + clock-div = <2>; + clock-mult = <1>; + }; + zs_clk: zs { + compatible = "fixed-factor-clock"; + clocks = <&cpg_clocks R8A7792_CLK_PLL1>; + #clock-cells = <0>; + clock-div = <6>; + clock-mult = <1>; + }; + p_clk: p { + compatible = "fixed-factor-clock"; + clocks = <&cpg_clocks R8A7792_CLK_PLL1>; + #clock-cells = <0>; + clock-div = <24>; + clock-mult = <1>; + }; + cp_clk: cp { + compatible = "fixed-factor-clock"; + clocks = <&cpg_clocks R8A7792_CLK_PLL1>; + #clock-cells = <0>; + clock-div = <48>; + clock-mult = <1>; + }; + m2_clk: m2 { + compatible = "fixed-factor-clock"; + clocks = <&cpg_clocks R8A7792_CLK_PLL1>; + #clock-cells = <0>; + clock-div = <8>; + clock-mult = <1>; + }; + + /* Gate clocks */ + mstp1_clks: mstp1_clks@e6150134 { + compatible = "renesas,r8a7792-mstp-clocks", + "renesas,cpg-mstp-clocks"; + reg = <0 0xe6150134 0 4>, <0 0xe6150038 0 4>; + clocks = <&m2_clk>; + #clock-cells = <1>; + clock-indices = <R8A7792_CLK_JPU>; + clock-output-names = "jpu"; + }; + mstp2_clks: mstp2_clks@e6150138 { + compatible = "renesas,r8a7792-mstp-clocks", + "renesas,cpg-mstp-clocks"; + reg = <0 0xe6150138 0 4>, <0 0xe6150040 0 4>; + clocks = <&zs_clk>, <&zs_clk>; + #clock-cells = <1>; + clock-indices = < + R8A7792_CLK_SYS_DMAC1 R8A7792_CLK_SYS_DMAC0 + >; + clock-output-names = "sys-dmac1", "sys-dmac0"; + }; + mstp4_clks: mstp4_clks@e6150140 { + compatible = "renesas,r8a7792-mstp-clocks", + "renesas,cpg-mstp-clocks"; + reg = <0 0xe6150140 0 4>, <0 0xe615004c 0 4>; + clocks = <&cp_clk>; + #clock-cells = <1>; + clock-indices = <R8A7792_CLK_IRQC>; + clock-output-names = "irqc"; + }; + mstp7_clks: mstp7_clks@e615014c { + compatible = "renesas,r8a7792-mstp-clocks", + "renesas,cpg-mstp-clocks"; + reg = <0 0xe615014c 0 4>, <0 0xe61501c4 0 4>; + clocks = <&zs_clk>, <&zs_clk>, <&p_clk>, <&p_clk>, + <&p_clk>, <&p_clk>; + #clock-cells = <1>; + clock-indices = < + R8A7792_CLK_HSCIF1 R8A7792_CLK_HSCIF0 + R8A7792_CLK_SCIF3 R8A7792_CLK_SCIF2 + R8A7792_CLK_SCIF1 R8A7792_CLK_SCIF0 + >; + clock-output-names = "hscif1", "hscif0", "scif3", + "scif2", "scif1", "scif0"; + }; + }; + + /* External root clock */ + extal_clk: extal { + compatible = "fixed-clock"; + #clock-cells = <0>; + /* This value must be overridden by the board. */ + clock-frequency = <0>; + }; + + /* External SCIF clock */ + scif_clk: scif { + compatible = "fixed-clock"; + #clock-cells = <0>; + /* This value must be overridden by the board. */ + clock-frequency = <0>; + }; +}; diff --git a/arch/arm/boot/dts/r8a7793-gose.dts b/arch/arm/boot/dts/r8a7793-gose.dts index 0ebc3ee34..90af18600 100644 --- a/arch/arm/boot/dts/r8a7793-gose.dts +++ b/arch/arm/boot/dts/r8a7793-gose.dts @@ -158,7 +158,7 @@ }; }; - vcc_sdhi0: regulator@0 { + vcc_sdhi0: regulator-vcc-sdhi0 { compatible = "regulator-fixed"; regulator-name = "SDHI0 Vcc"; @@ -169,7 +169,7 @@ enable-active-high; }; - vccq_sdhi0: regulator@1 { + vccq_sdhi0: regulator-vccq-sdhi0 { compatible = "regulator-gpio"; regulator-name = "SDHI0 VccQ"; @@ -182,7 +182,7 @@ 1800000 0>; }; - vcc_sdhi1: regulator@2 { + vcc_sdhi1: regulator-vcc-sdhi1 { compatible = "regulator-fixed"; regulator-name = "SDHI1 Vcc"; @@ -193,7 +193,7 @@ enable-active-high; }; - vccq_sdhi1: regulator@3 { + vccq_sdhi1: regulator-vccq-sdhi1 { compatible = "regulator-gpio"; regulator-name = "SDHI1 VccQ"; @@ -206,7 +206,7 @@ 1800000 0>; }; - vcc_sdhi2: regulator@4 { + vcc_sdhi2: regulator-vcc-sdhi2 { compatible = "regulator-fixed"; regulator-name = "SDHI2 Vcc"; @@ -217,7 +217,7 @@ enable-active-high; }; - vccq_sdhi2: regulator@5 { + vccq_sdhi2: regulator-vccq-sdhi2 { compatible = "regulator-gpio"; regulator-name = "SDHI2 VccQ"; @@ -320,12 +320,12 @@ function = "du"; }; - scif0_pins: serial0 { + scif0_pins: scif0 { groups = "scif0_data_d"; function = "scif0"; }; - scif1_pins: serial1 { + scif1_pins: scif1 { groups = "scif1_data_d"; function = "scif1"; }; @@ -360,7 +360,7 @@ renesas,function = "sdhi2"; }; - qspi_pins: spi0 { + qspi_pins: qspi { groups = "qspi_ctrl", "qspi_data4"; function = "qspi"; }; diff --git a/arch/arm/boot/dts/r8a7793.dtsi b/arch/arm/boot/dts/r8a7793.dtsi index 1dd6d202c..8d02aacf2 100644 --- a/arch/arm/boot/dts/r8a7793.dtsi +++ b/arch/arm/boot/dts/r8a7793.dtsi @@ -35,6 +35,7 @@ cpus { #address-cells = <1>; #size-cells = <0>; + enable-method = "renesas,apmu"; cpu0: cpu@0 { device_type = "cpu"; @@ -55,6 +56,28 @@ < 375000 1000000>; next-level-cache = <&L2_CA15>; }; + + cpu1: cpu@1 { + device_type = "cpu"; + compatible = "arm,cortex-a15"; + reg = <1>; + clock-frequency = <1500000000>; + power-domains = <&sysc R8A7793_PD_CA15_CPU1>; + }; + + L2_CA15: cache-controller@0 { + compatible = "cache"; + reg = <0>; + power-domains = <&sysc R8A7793_PD_CA15_SCU>; + cache-unified; + cache-level = <2>; + }; + }; + + apmu@e6152000 { + compatible = "renesas,r8a7793-apmu", "renesas,apmu"; + reg = <0 0xe6152000 0 0x188>; + cpus = <&cpu0 &cpu1>; }; thermal-zones { @@ -76,13 +99,6 @@ }; }; - L2_CA15: cache-controller@0 { - compatible = "cache"; - power-domains = <&sysc R8A7793_PD_CA15_SCU>; - cache-unified; - cache-level = <2>; - }; - gic: interrupt-controller@f1001000 { compatible = "arm,gic-400"; #interrupt-cells = <3>; @@ -473,8 +489,9 @@ reg = <0 0xe60b0000 0 0x425>; interrupts = <GIC_SPI 173 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp9_clks R8A7793_CLK_IICDVFS>; - dmas = <&dmac0 0x77>, <&dmac0 0x78>; - dma-names = "tx", "rx"; + dmas = <&dmac0 0x77>, <&dmac0 0x78>, + <&dmac1 0x77>, <&dmac1 0x78>; + dma-names = "tx", "rx", "tx", "rx"; power-domains = <&sysc R8A7793_PD_ALWAYS_ON>; status = "disabled"; }; @@ -486,8 +503,9 @@ reg = <0 0xe6500000 0 0x425>; interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp3_clks R8A7793_CLK_IIC0>; - dmas = <&dmac0 0x61>, <&dmac0 0x62>; - dma-names = "tx", "rx"; + dmas = <&dmac0 0x61>, <&dmac0 0x62>, + <&dmac1 0x61>, <&dmac1 0x62>; + dma-names = "tx", "rx", "tx", "rx"; power-domains = <&sysc R8A7793_PD_ALWAYS_ON>; status = "disabled"; }; @@ -499,8 +517,9 @@ reg = <0 0xe6510000 0 0x425>; interrupts = <GIC_SPI 175 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp3_clks R8A7793_CLK_IIC1>; - dmas = <&dmac0 0x65>, <&dmac0 0x66>; - dma-names = "tx", "rx"; + dmas = <&dmac0 0x65>, <&dmac0 0x66>, + <&dmac1 0x65>, <&dmac1 0x66>; + dma-names = "tx", "rx", "tx", "rx"; power-domains = <&sysc R8A7793_PD_ALWAYS_ON>; status = "disabled"; }; @@ -515,8 +534,9 @@ reg = <0 0xee100000 0 0x328>; interrupts = <GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp3_clks R8A7793_CLK_SDHI0>; - dmas = <&dmac0 0xcd>, <&dmac0 0xce>; - dma-names = "tx", "rx"; + dmas = <&dmac0 0xcd>, <&dmac0 0xce>, + <&dmac1 0xcd>, <&dmac1 0xce>; + dma-names = "tx", "rx", "tx", "rx"; power-domains = <&sysc R8A7793_PD_ALWAYS_ON>; status = "disabled"; }; @@ -526,8 +546,9 @@ reg = <0 0xee140000 0 0x100>; interrupts = <GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp3_clks R8A7793_CLK_SDHI1>; - dmas = <&dmac0 0xc1>, <&dmac0 0xc2>; - dma-names = "tx", "rx"; + dmas = <&dmac0 0xc1>, <&dmac0 0xc2>, + <&dmac1 0xc1>, <&dmac1 0xc2>; + dma-names = "tx", "rx", "tx", "rx"; power-domains = <&sysc R8A7793_PD_ALWAYS_ON>; status = "disabled"; }; @@ -537,10 +558,25 @@ reg = <0 0xee160000 0 0x100>; interrupts = <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp3_clks R8A7793_CLK_SDHI2>; - dmas = <&dmac0 0xd3>, <&dmac0 0xd4>; - dma-names = "tx", "rx"; + dmas = <&dmac0 0xd3>, <&dmac0 0xd4>, + <&dmac1 0xd3>, <&dmac1 0xd4>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A7793_PD_ALWAYS_ON>; + status = "disabled"; + }; + + mmcif0: mmc@ee200000 { + compatible = "renesas,mmcif-r8a7793", "renesas,sh-mmcif"; + reg = <0 0xee200000 0 0x80>; + interrupts = <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp3_clks R8A7793_CLK_MMCIF0>; + dmas = <&dmac0 0xd1>, <&dmac0 0xd2>, + <&dmac1 0xd1>, <&dmac1 0xd2>; + dma-names = "tx", "rx", "tx", "rx"; power-domains = <&sysc R8A7793_PD_ALWAYS_ON>; + reg-io-width = <4>; status = "disabled"; + max-frequency = <97500000>; }; scifa0: serial@e6c40000 { @@ -550,8 +586,9 @@ interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp2_clks R8A7793_CLK_SCIFA0>; clock-names = "fck"; - dmas = <&dmac0 0x21>, <&dmac0 0x22>; - dma-names = "tx", "rx"; + dmas = <&dmac0 0x21>, <&dmac0 0x22>, + <&dmac1 0x21>, <&dmac1 0x22>; + dma-names = "tx", "rx", "tx", "rx"; power-domains = <&sysc R8A7793_PD_ALWAYS_ON>; status = "disabled"; }; @@ -563,8 +600,9 @@ interrupts = <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp2_clks R8A7793_CLK_SCIFA1>; clock-names = "fck"; - dmas = <&dmac0 0x25>, <&dmac0 0x26>; - dma-names = "tx", "rx"; + dmas = <&dmac0 0x25>, <&dmac0 0x26>, + <&dmac1 0x25>, <&dmac1 0x26>; + dma-names = "tx", "rx", "tx", "rx"; power-domains = <&sysc R8A7793_PD_ALWAYS_ON>; status = "disabled"; }; @@ -576,8 +614,9 @@ interrupts = <GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp2_clks R8A7793_CLK_SCIFA2>; clock-names = "fck"; - dmas = <&dmac0 0x27>, <&dmac0 0x28>; - dma-names = "tx", "rx"; + dmas = <&dmac0 0x27>, <&dmac0 0x28>, + <&dmac1 0x27>, <&dmac1 0x28>; + dma-names = "tx", "rx", "tx", "rx"; power-domains = <&sysc R8A7793_PD_ALWAYS_ON>; status = "disabled"; }; @@ -589,8 +628,9 @@ interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp11_clks R8A7793_CLK_SCIFA3>; clock-names = "fck"; - dmas = <&dmac0 0x1b>, <&dmac0 0x1c>; - dma-names = "tx", "rx"; + dmas = <&dmac0 0x1b>, <&dmac0 0x1c>, + <&dmac1 0x1b>, <&dmac1 0x1c>; + dma-names = "tx", "rx", "tx", "rx"; power-domains = <&sysc R8A7793_PD_ALWAYS_ON>; status = "disabled"; }; @@ -602,8 +642,9 @@ interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp11_clks R8A7793_CLK_SCIFA4>; clock-names = "fck"; - dmas = <&dmac0 0x1f>, <&dmac0 0x20>; - dma-names = "tx", "rx"; + dmas = <&dmac0 0x1f>, <&dmac0 0x20>, + <&dmac1 0x1f>, <&dmac1 0x20>; + dma-names = "tx", "rx", "tx", "rx"; power-domains = <&sysc R8A7793_PD_ALWAYS_ON>; status = "disabled"; }; @@ -615,8 +656,9 @@ interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp11_clks R8A7793_CLK_SCIFA5>; clock-names = "fck"; - dmas = <&dmac0 0x23>, <&dmac0 0x24>; - dma-names = "tx", "rx"; + dmas = <&dmac0 0x23>, <&dmac0 0x24>, + <&dmac1 0x23>, <&dmac1 0x24>; + dma-names = "tx", "rx", "tx", "rx"; power-domains = <&sysc R8A7793_PD_ALWAYS_ON>; status = "disabled"; }; @@ -628,8 +670,9 @@ interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp2_clks R8A7793_CLK_SCIFB0>; clock-names = "fck"; - dmas = <&dmac0 0x3d>, <&dmac0 0x3e>; - dma-names = "tx", "rx"; + dmas = <&dmac0 0x3d>, <&dmac0 0x3e>, + <&dmac1 0x3d>, <&dmac1 0x3e>; + dma-names = "tx", "rx", "tx", "rx"; power-domains = <&sysc R8A7793_PD_ALWAYS_ON>; status = "disabled"; }; @@ -641,8 +684,9 @@ interrupts = <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp2_clks R8A7793_CLK_SCIFB1>; clock-names = "fck"; - dmas = <&dmac0 0x19>, <&dmac0 0x1a>; - dma-names = "tx", "rx"; + dmas = <&dmac0 0x19>, <&dmac0 0x1a>, + <&dmac1 0x19>, <&dmac1 0x1a>; + dma-names = "tx", "rx", "tx", "rx"; power-domains = <&sysc R8A7793_PD_ALWAYS_ON>; status = "disabled"; }; @@ -654,8 +698,9 @@ interrupts = <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp2_clks R8A7793_CLK_SCIFB2>; clock-names = "fck"; - dmas = <&dmac0 0x1d>, <&dmac0 0x1e>; - dma-names = "tx", "rx"; + dmas = <&dmac0 0x1d>, <&dmac0 0x1e>, + <&dmac1 0x1d>, <&dmac1 0x1e>; + dma-names = "tx", "rx", "tx", "rx"; power-domains = <&sysc R8A7793_PD_ALWAYS_ON>; status = "disabled"; }; @@ -668,8 +713,9 @@ clocks = <&mstp7_clks R8A7793_CLK_SCIF0>, <&zs_clk>, <&scif_clk>; clock-names = "fck", "brg_int", "scif_clk"; - dmas = <&dmac0 0x29>, <&dmac0 0x2a>; - dma-names = "tx", "rx"; + dmas = <&dmac0 0x29>, <&dmac0 0x2a>, + <&dmac1 0x29>, <&dmac1 0x2a>; + dma-names = "tx", "rx", "tx", "rx"; power-domains = <&sysc R8A7793_PD_ALWAYS_ON>; status = "disabled"; }; @@ -682,8 +728,9 @@ clocks = <&mstp7_clks R8A7793_CLK_SCIF1>, <&zs_clk>, <&scif_clk>; clock-names = "fck", "brg_int", "scif_clk"; - dmas = <&dmac0 0x2d>, <&dmac0 0x2e>; - dma-names = "tx", "rx"; + dmas = <&dmac0 0x2d>, <&dmac0 0x2e>, + <&dmac1 0x2d>, <&dmac1 0x2e>; + dma-names = "tx", "rx", "tx", "rx"; power-domains = <&sysc R8A7793_PD_ALWAYS_ON>; status = "disabled"; }; @@ -696,8 +743,9 @@ clocks = <&mstp7_clks R8A7793_CLK_SCIF2>, <&zs_clk>, <&scif_clk>; clock-names = "fck", "brg_int", "scif_clk"; - dmas = <&dmac0 0x2b>, <&dmac0 0x2c>; - dma-names = "tx", "rx"; + dmas = <&dmac0 0x2b>, <&dmac0 0x2c>, + <&dmac1 0x2b>, <&dmac1 0x2c>; + dma-names = "tx", "rx", "tx", "rx"; power-domains = <&sysc R8A7793_PD_ALWAYS_ON>; status = "disabled"; }; @@ -710,8 +758,9 @@ clocks = <&mstp7_clks R8A7793_CLK_SCIF3>, <&zs_clk>, <&scif_clk>; clock-names = "fck", "brg_int", "scif_clk"; - dmas = <&dmac0 0x2f>, <&dmac0 0x30>; - dma-names = "tx", "rx"; + dmas = <&dmac0 0x2f>, <&dmac0 0x30>, + <&dmac1 0x2f>, <&dmac1 0x30>; + dma-names = "tx", "rx", "tx", "rx"; power-domains = <&sysc R8A7793_PD_ALWAYS_ON>; status = "disabled"; }; @@ -724,8 +773,9 @@ clocks = <&mstp7_clks R8A7793_CLK_SCIF4>, <&zs_clk>, <&scif_clk>; clock-names = "fck", "brg_int", "scif_clk"; - dmas = <&dmac0 0xfb>, <&dmac0 0xfc>; - dma-names = "tx", "rx"; + dmas = <&dmac0 0xfb>, <&dmac0 0xfc>, + <&dmac1 0xfb>, <&dmac1 0xfc>; + dma-names = "tx", "rx", "tx", "rx"; power-domains = <&sysc R8A7793_PD_ALWAYS_ON>; status = "disabled"; }; @@ -738,8 +788,9 @@ clocks = <&mstp7_clks R8A7793_CLK_SCIF5>, <&zs_clk>, <&scif_clk>; clock-names = "fck", "brg_int", "scif_clk"; - dmas = <&dmac0 0xfd>, <&dmac0 0xfe>; - dma-names = "tx", "rx"; + dmas = <&dmac0 0xfd>, <&dmac0 0xfe>, + <&dmac1 0xfd>, <&dmac1 0xfe>; + dma-names = "tx", "rx", "tx", "rx"; power-domains = <&sysc R8A7793_PD_ALWAYS_ON>; status = "disabled"; }; @@ -752,8 +803,9 @@ clocks = <&mstp7_clks R8A7793_CLK_HSCIF0>, <&zs_clk>, <&scif_clk>; clock-names = "fck", "brg_int", "scif_clk"; - dmas = <&dmac0 0x39>, <&dmac0 0x3a>; - dma-names = "tx", "rx"; + dmas = <&dmac0 0x39>, <&dmac0 0x3a>, + <&dmac1 0x39>, <&dmac1 0x3a>; + dma-names = "tx", "rx", "tx", "rx"; power-domains = <&sysc R8A7793_PD_ALWAYS_ON>; status = "disabled"; }; @@ -766,8 +818,9 @@ clocks = <&mstp7_clks R8A7793_CLK_HSCIF1>, <&zs_clk>, <&scif_clk>; clock-names = "fck", "brg_int", "scif_clk"; - dmas = <&dmac0 0x4d>, <&dmac0 0x4e>; - dma-names = "tx", "rx"; + dmas = <&dmac0 0x4d>, <&dmac0 0x4e>, + <&dmac1 0x4d>, <&dmac1 0x4e>; + dma-names = "tx", "rx", "tx", "rx"; power-domains = <&sysc R8A7793_PD_ALWAYS_ON>; status = "disabled"; }; @@ -780,8 +833,9 @@ clocks = <&mstp7_clks R8A7793_CLK_HSCIF2>, <&zs_clk>, <&scif_clk>; clock-names = "fck", "brg_int", "scif_clk"; - dmas = <&dmac0 0x3b>, <&dmac0 0x3c>; - dma-names = "tx", "rx"; + dmas = <&dmac0 0x3b>, <&dmac0 0x3c>, + <&dmac1 0x3b>, <&dmac1 0x3c>; + dma-names = "tx", "rx", "tx", "rx"; power-domains = <&sysc R8A7793_PD_ALWAYS_ON>; status = "disabled"; }; @@ -803,8 +857,9 @@ reg = <0 0xe6b10000 0 0x2c>; interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp9_clks R8A7793_CLK_QSPI_MOD>; - dmas = <&dmac0 0x17>, <&dmac0 0x18>; - dma-names = "tx", "rx"; + dmas = <&dmac0 0x17>, <&dmac0 0x18>, + <&dmac1 0x17>, <&dmac1 0x18>; + dma-names = "tx", "rx", "tx", "rx"; power-domains = <&sysc R8A7793_PD_ALWAYS_ON>; num-cs = <1>; #address-cells = <1>; @@ -1330,63 +1385,63 @@ status = "disabled"; rcar_sound,dvc { - dvc0: dvc@0 { + dvc0: dvc-0 { dmas = <&audma0 0xbc>; dma-names = "tx"; }; - dvc1: dvc@1 { + dvc1: dvc-1 { dmas = <&audma0 0xbe>; dma-names = "tx"; }; }; rcar_sound,src { - src0: src@0 { + src0: src-0 { interrupts = <GIC_SPI 352 IRQ_TYPE_LEVEL_HIGH>; dmas = <&audma0 0x85>, <&audma1 0x9a>; dma-names = "rx", "tx"; }; - src1: src@1 { + src1: src-1 { interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>; dmas = <&audma0 0x87>, <&audma1 0x9c>; dma-names = "rx", "tx"; }; - src2: src@2 { + src2: src-2 { interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>; dmas = <&audma0 0x89>, <&audma1 0x9e>; dma-names = "rx", "tx"; }; - src3: src@3 { + src3: src-3 { interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>; dmas = <&audma0 0x8b>, <&audma1 0xa0>; dma-names = "rx", "tx"; }; - src4: src@4 { + src4: src-4 { interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>; dmas = <&audma0 0x8d>, <&audma1 0xb0>; dma-names = "rx", "tx"; }; - src5: src@5 { + src5: src-5 { interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>; dmas = <&audma0 0x8f>, <&audma1 0xb2>; dma-names = "rx", "tx"; }; - src6: src@6 { + src6: src-6 { interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>; dmas = <&audma0 0x91>, <&audma1 0xb4>; dma-names = "rx", "tx"; }; - src7: src@7 { + src7: src-7 { interrupts = <GIC_SPI 359 IRQ_TYPE_LEVEL_HIGH>; dmas = <&audma0 0x93>, <&audma1 0xb6>; dma-names = "rx", "tx"; }; - src8: src@8 { + src8: src-8 { interrupts = <GIC_SPI 360 IRQ_TYPE_LEVEL_HIGH>; dmas = <&audma0 0x95>, <&audma1 0xb8>; dma-names = "rx", "tx"; }; - src9: src@9 { + src9: src-9 { interrupts = <GIC_SPI 361 IRQ_TYPE_LEVEL_HIGH>; dmas = <&audma0 0x97>, <&audma1 0xba>; dma-names = "rx", "tx"; @@ -1394,52 +1449,52 @@ }; rcar_sound,ssi { - ssi0: ssi@0 { + ssi0: ssi-0 { interrupts = <GIC_SPI 370 IRQ_TYPE_LEVEL_HIGH>; dmas = <&audma0 0x01>, <&audma1 0x02>, <&audma0 0x15>, <&audma1 0x16>; dma-names = "rx", "tx", "rxu", "txu"; }; - ssi1: ssi@1 { + ssi1: ssi-1 { interrupts = <GIC_SPI 371 IRQ_TYPE_LEVEL_HIGH>; dmas = <&audma0 0x03>, <&audma1 0x04>, <&audma0 0x49>, <&audma1 0x4a>; dma-names = "rx", "tx", "rxu", "txu"; }; - ssi2: ssi@2 { + ssi2: ssi-2 { interrupts = <GIC_SPI 372 IRQ_TYPE_LEVEL_HIGH>; dmas = <&audma0 0x05>, <&audma1 0x06>, <&audma0 0x63>, <&audma1 0x64>; dma-names = "rx", "tx", "rxu", "txu"; }; - ssi3: ssi@3 { + ssi3: ssi-3 { interrupts = <GIC_SPI 373 IRQ_TYPE_LEVEL_HIGH>; dmas = <&audma0 0x07>, <&audma1 0x08>, <&audma0 0x6f>, <&audma1 0x70>; dma-names = "rx", "tx", "rxu", "txu"; }; - ssi4: ssi@4 { + ssi4: ssi-4 { interrupts = <GIC_SPI 374 IRQ_TYPE_LEVEL_HIGH>; dmas = <&audma0 0x09>, <&audma1 0x0a>, <&audma0 0x71>, <&audma1 0x72>; dma-names = "rx", "tx", "rxu", "txu"; }; - ssi5: ssi@5 { + ssi5: ssi-5 { interrupts = <GIC_SPI 375 IRQ_TYPE_LEVEL_HIGH>; dmas = <&audma0 0x0b>, <&audma1 0x0c>, <&audma0 0x73>, <&audma1 0x74>; dma-names = "rx", "tx", "rxu", "txu"; }; - ssi6: ssi@6 { + ssi6: ssi-6 { interrupts = <GIC_SPI 376 IRQ_TYPE_LEVEL_HIGH>; dmas = <&audma0 0x0d>, <&audma1 0x0e>, <&audma0 0x75>, <&audma1 0x76>; dma-names = "rx", "tx", "rxu", "txu"; }; - ssi7: ssi@7 { + ssi7: ssi-7 { interrupts = <GIC_SPI 377 IRQ_TYPE_LEVEL_HIGH>; dmas = <&audma0 0x0f>, <&audma1 0x10>, <&audma0 0x79>, <&audma1 0x7a>; dma-names = "rx", "tx", "rxu", "txu"; }; - ssi8: ssi@8 { + ssi8: ssi-8 { interrupts = <GIC_SPI 378 IRQ_TYPE_LEVEL_HIGH>; dmas = <&audma0 0x11>, <&audma1 0x12>, <&audma0 0x7b>, <&audma1 0x7c>; dma-names = "rx", "tx", "rxu", "txu"; }; - ssi9: ssi@9 { + ssi9: ssi-9 { interrupts = <GIC_SPI 379 IRQ_TYPE_LEVEL_HIGH>; dmas = <&audma0 0x13>, <&audma1 0x14>, <&audma0 0x7d>, <&audma1 0x7e>; dma-names = "rx", "tx", "rxu", "txu"; diff --git a/arch/arm/boot/dts/r8a7794-alt.dts b/arch/arm/boot/dts/r8a7794-alt.dts index 383ad791f..1ad37d431 100644 --- a/arch/arm/boot/dts/r8a7794-alt.dts +++ b/arch/arm/boot/dts/r8a7794-alt.dts @@ -111,7 +111,7 @@ function = "du"; }; - scif2_pins: serial2 { + scif2_pins: scif2 { groups = "scif2_data"; function = "scif2"; }; @@ -147,7 +147,7 @@ }; &pfc { - qspi_pins: spi0 { + qspi_pins: qspi { groups = "qspi_ctrl", "qspi_data4"; function = "qspi"; }; diff --git a/arch/arm/boot/dts/r8a7794-silk.dts b/arch/arm/boot/dts/r8a7794-silk.dts index 56d98d5b2..cf24f45ff 100644 --- a/arch/arm/boot/dts/r8a7794-silk.dts +++ b/arch/arm/boot/dts/r8a7794-silk.dts @@ -32,7 +32,7 @@ reg = <0 0x40000000 0 0x40000000>; }; - d3_3v: regulator@0 { + d3_3v: regulator-d3-3v { compatible = "regulator-fixed"; regulator-name = "D3.3V"; regulator-min-microvolt = <3300000>; @@ -41,7 +41,7 @@ regulator-always-on; }; - vcc_sdhi1: regulator@3 { + vcc_sdhi1: regulator-vcc-sdhi1 { compatible = "regulator-fixed"; regulator-name = "SDHI1 Vcc"; @@ -52,7 +52,7 @@ enable-active-high; }; - vccq_sdhi1: regulator@4 { + vccq_sdhi1: regulator-vccq-sdhi1 { compatible = "regulator-gpio"; regulator-name = "SDHI1 VccQ"; @@ -129,7 +129,7 @@ pinctrl-0 = <&scif_clk_pins>; pinctrl-names = "default"; - scif2_pins: serial2 { + scif2_pins: scif2 { groups = "scif2_data"; function = "scif2"; }; @@ -164,7 +164,7 @@ function = "sdhi1"; }; - qspi_pins: spi0 { + qspi_pins: qspi { groups = "qspi_ctrl", "qspi_data4"; function = "qspi"; }; @@ -183,6 +183,16 @@ groups = "usb1"; function = "usb1"; }; + + du0_pins: du0 { + groups = "du0_rgb888", "du0_sync", "du0_disp", "du0_clk0_out"; + function = "du0"; + }; + + du1_pins: du1 { + groups = "du1_rgb666", "du1_sync", "du1_disp", "du1_clk0_out"; + function = "du1"; + }; }; &scif2 { @@ -360,6 +370,8 @@ }; &du { + pinctrl-0 = <&du0_pins &du1_pins>; + pinctrl-names = "default"; status = "okay"; clocks = <&mstp7_clks R8A7794_CLK_DU0>, diff --git a/arch/arm/boot/dts/r8a7794.dtsi b/arch/arm/boot/dts/r8a7794.dtsi index f334a3a71..685f986cf 100644 --- a/arch/arm/boot/dts/r8a7794.dtsi +++ b/arch/arm/boot/dts/r8a7794.dtsi @@ -55,13 +55,14 @@ power-domains = <&sysc R8A7794_PD_CA7_CPU1>; next-level-cache = <&L2_CA7>; }; - }; - L2_CA7: cache-controller@1 { - compatible = "cache"; - power-domains = <&sysc R8A7794_PD_CA7_SCU>; - cache-unified; - cache-level = <2>; + L2_CA7: cache-controller@0 { + compatible = "cache"; + reg = <0>; + power-domains = <&sysc R8A7794_PD_CA7_SCU>; + cache-unified; + cache-level = <2>; + }; }; gic: interrupt-controller@f1001000 { @@ -302,8 +303,9 @@ interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp2_clks R8A7794_CLK_SCIFA0>; clock-names = "fck"; - dmas = <&dmac0 0x21>, <&dmac0 0x22>; - dma-names = "tx", "rx"; + dmas = <&dmac0 0x21>, <&dmac0 0x22>, + <&dmac1 0x21>, <&dmac1 0x22>; + dma-names = "tx", "rx", "tx", "rx"; power-domains = <&sysc R8A7794_PD_ALWAYS_ON>; status = "disabled"; }; @@ -315,8 +317,9 @@ interrupts = <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp2_clks R8A7794_CLK_SCIFA1>; clock-names = "fck"; - dmas = <&dmac0 0x25>, <&dmac0 0x26>; - dma-names = "tx", "rx"; + dmas = <&dmac0 0x25>, <&dmac0 0x26>, + <&dmac1 0x25>, <&dmac1 0x26>; + dma-names = "tx", "rx", "tx", "rx"; power-domains = <&sysc R8A7794_PD_ALWAYS_ON>; status = "disabled"; }; @@ -328,8 +331,9 @@ interrupts = <GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp2_clks R8A7794_CLK_SCIFA2>; clock-names = "fck"; - dmas = <&dmac0 0x27>, <&dmac0 0x28>; - dma-names = "tx", "rx"; + dmas = <&dmac0 0x27>, <&dmac0 0x28>, + <&dmac1 0x27>, <&dmac1 0x28>; + dma-names = "tx", "rx", "tx", "rx"; power-domains = <&sysc R8A7794_PD_ALWAYS_ON>; status = "disabled"; }; @@ -341,8 +345,9 @@ interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp11_clks R8A7794_CLK_SCIFA3>; clock-names = "fck"; - dmas = <&dmac0 0x1b>, <&dmac0 0x1c>; - dma-names = "tx", "rx"; + dmas = <&dmac0 0x1b>, <&dmac0 0x1c>, + <&dmac1 0x1b>, <&dmac1 0x1c>; + dma-names = "tx", "rx", "tx", "rx"; power-domains = <&sysc R8A7794_PD_ALWAYS_ON>; status = "disabled"; }; @@ -354,8 +359,9 @@ interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp11_clks R8A7794_CLK_SCIFA4>; clock-names = "fck"; - dmas = <&dmac0 0x1f>, <&dmac0 0x20>; - dma-names = "tx", "rx"; + dmas = <&dmac0 0x1f>, <&dmac0 0x20>, + <&dmac1 0x1f>, <&dmac1 0x20>; + dma-names = "tx", "rx", "tx", "rx"; power-domains = <&sysc R8A7794_PD_ALWAYS_ON>; status = "disabled"; }; @@ -367,8 +373,9 @@ interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp11_clks R8A7794_CLK_SCIFA5>; clock-names = "fck"; - dmas = <&dmac0 0x23>, <&dmac0 0x24>; - dma-names = "tx", "rx"; + dmas = <&dmac0 0x23>, <&dmac0 0x24>, + <&dmac1 0x23>, <&dmac1 0x24>; + dma-names = "tx", "rx", "tx", "rx"; power-domains = <&sysc R8A7794_PD_ALWAYS_ON>; status = "disabled"; }; @@ -380,8 +387,9 @@ interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp2_clks R8A7794_CLK_SCIFB0>; clock-names = "fck"; - dmas = <&dmac0 0x3d>, <&dmac0 0x3e>; - dma-names = "tx", "rx"; + dmas = <&dmac0 0x3d>, <&dmac0 0x3e>, + <&dmac1 0x3d>, <&dmac1 0x3e>; + dma-names = "tx", "rx", "tx", "rx"; power-domains = <&sysc R8A7794_PD_ALWAYS_ON>; status = "disabled"; }; @@ -393,8 +401,9 @@ interrupts = <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp2_clks R8A7794_CLK_SCIFB1>; clock-names = "fck"; - dmas = <&dmac0 0x19>, <&dmac0 0x1a>; - dma-names = "tx", "rx"; + dmas = <&dmac0 0x19>, <&dmac0 0x1a>, + <&dmac1 0x19>, <&dmac1 0x1a>; + dma-names = "tx", "rx", "tx", "rx"; power-domains = <&sysc R8A7794_PD_ALWAYS_ON>; status = "disabled"; }; @@ -406,8 +415,9 @@ interrupts = <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp2_clks R8A7794_CLK_SCIFB2>; clock-names = "fck"; - dmas = <&dmac0 0x1d>, <&dmac0 0x1e>; - dma-names = "tx", "rx"; + dmas = <&dmac0 0x1d>, <&dmac0 0x1e>, + <&dmac1 0x1d>, <&dmac1 0x1e>; + dma-names = "tx", "rx", "tx", "rx"; power-domains = <&sysc R8A7794_PD_ALWAYS_ON>; status = "disabled"; }; @@ -420,8 +430,9 @@ clocks = <&mstp7_clks R8A7794_CLK_SCIF0>, <&zs_clk>, <&scif_clk>; clock-names = "fck", "brg_int", "scif_clk"; - dmas = <&dmac0 0x29>, <&dmac0 0x2a>; - dma-names = "tx", "rx"; + dmas = <&dmac0 0x29>, <&dmac0 0x2a>, + <&dmac1 0x29>, <&dmac1 0x2a>; + dma-names = "tx", "rx", "tx", "rx"; power-domains = <&sysc R8A7794_PD_ALWAYS_ON>; status = "disabled"; }; @@ -434,8 +445,9 @@ clocks = <&mstp7_clks R8A7794_CLK_SCIF1>, <&zs_clk>, <&scif_clk>; clock-names = "fck", "brg_int", "scif_clk"; - dmas = <&dmac0 0x2d>, <&dmac0 0x2e>; - dma-names = "tx", "rx"; + dmas = <&dmac0 0x2d>, <&dmac0 0x2e>, + <&dmac1 0x2d>, <&dmac1 0x2e>; + dma-names = "tx", "rx", "tx", "rx"; power-domains = <&sysc R8A7794_PD_ALWAYS_ON>; status = "disabled"; }; @@ -448,8 +460,9 @@ clocks = <&mstp7_clks R8A7794_CLK_SCIF2>, <&zs_clk>, <&scif_clk>; clock-names = "fck", "brg_int", "scif_clk"; - dmas = <&dmac0 0x2b>, <&dmac0 0x2c>; - dma-names = "tx", "rx"; + dmas = <&dmac0 0x2b>, <&dmac0 0x2c>, + <&dmac1 0x2b>, <&dmac1 0x2c>; + dma-names = "tx", "rx", "tx", "rx"; power-domains = <&sysc R8A7794_PD_ALWAYS_ON>; status = "disabled"; }; @@ -462,8 +475,9 @@ clocks = <&mstp7_clks R8A7794_CLK_SCIF3>, <&zs_clk>, <&scif_clk>; clock-names = "fck", "brg_int", "scif_clk"; - dmas = <&dmac0 0x2f>, <&dmac0 0x30>; - dma-names = "tx", "rx"; + dmas = <&dmac0 0x2f>, <&dmac0 0x30>, + <&dmac1 0x2f>, <&dmac1 0x30>; + dma-names = "tx", "rx", "tx", "rx"; power-domains = <&sysc R8A7794_PD_ALWAYS_ON>; status = "disabled"; }; @@ -476,8 +490,9 @@ clocks = <&mstp7_clks R8A7794_CLK_SCIF4>, <&zs_clk>, <&scif_clk>; clock-names = "fck", "brg_int", "scif_clk"; - dmas = <&dmac0 0xfb>, <&dmac0 0xfc>; - dma-names = "tx", "rx"; + dmas = <&dmac0 0xfb>, <&dmac0 0xfc>, + <&dmac1 0xfb>, <&dmac1 0xfc>; + dma-names = "tx", "rx", "tx", "rx"; power-domains = <&sysc R8A7794_PD_ALWAYS_ON>; status = "disabled"; }; @@ -490,8 +505,9 @@ clocks = <&mstp7_clks R8A7794_CLK_SCIF5>, <&zs_clk>, <&scif_clk>; clock-names = "fck", "brg_int", "scif_clk"; - dmas = <&dmac0 0xfd>, <&dmac0 0xfe>; - dma-names = "tx", "rx"; + dmas = <&dmac0 0xfd>, <&dmac0 0xfe>, + <&dmac1 0xfd>, <&dmac1 0xfe>; + dma-names = "tx", "rx", "tx", "rx"; power-domains = <&sysc R8A7794_PD_ALWAYS_ON>; status = "disabled"; }; @@ -504,8 +520,9 @@ clocks = <&mstp7_clks R8A7794_CLK_HSCIF0>, <&zs_clk>, <&scif_clk>; clock-names = "fck", "brg_int", "scif_clk"; - dmas = <&dmac0 0x39>, <&dmac0 0x3a>; - dma-names = "tx", "rx"; + dmas = <&dmac0 0x39>, <&dmac0 0x3a>, + <&dmac1 0x39>, <&dmac1 0x3a>; + dma-names = "tx", "rx", "tx", "rx"; power-domains = <&sysc R8A7794_PD_ALWAYS_ON>; status = "disabled"; }; @@ -518,8 +535,9 @@ clocks = <&mstp7_clks R8A7794_CLK_HSCIF1>, <&zs_clk>, <&scif_clk>; clock-names = "fck", "brg_int", "scif_clk"; - dmas = <&dmac0 0x4d>, <&dmac0 0x4e>; - dma-names = "tx", "rx"; + dmas = <&dmac0 0x4d>, <&dmac0 0x4e>, + <&dmac1 0x4d>, <&dmac1 0x4e>; + dma-names = "tx", "rx", "tx", "rx"; power-domains = <&sysc R8A7794_PD_ALWAYS_ON>; status = "disabled"; }; @@ -532,8 +550,9 @@ clocks = <&mstp7_clks R8A7794_CLK_HSCIF2>, <&zs_clk>, <&scif_clk>; clock-names = "fck", "brg_int", "scif_clk"; - dmas = <&dmac0 0x3b>, <&dmac0 0x3c>; - dma-names = "tx", "rx"; + dmas = <&dmac0 0x3b>, <&dmac0 0x3c>, + <&dmac1 0x3b>, <&dmac1 0x3c>; + dma-names = "tx", "rx", "tx", "rx"; power-domains = <&sysc R8A7794_PD_ALWAYS_ON>; status = "disabled"; }; @@ -640,8 +659,9 @@ reg = <0 0xe6500000 0 0x425>; interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp3_clks R8A7794_CLK_IIC0>; - dmas = <&dmac0 0x61>, <&dmac0 0x62>; - dma-names = "tx", "rx"; + dmas = <&dmac0 0x61>, <&dmac0 0x62>, + <&dmac1 0x61>, <&dmac1 0x62>; + dma-names = "tx", "rx", "tx", "rx"; power-domains = <&sysc R8A7794_PD_ALWAYS_ON>; #address-cells = <1>; #size-cells = <0>; @@ -653,8 +673,9 @@ reg = <0 0xe6510000 0 0x425>; interrupts = <GIC_SPI 175 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp3_clks R8A7794_CLK_IIC1>; - dmas = <&dmac0 0x65>, <&dmac0 0x66>; - dma-names = "tx", "rx"; + dmas = <&dmac0 0x65>, <&dmac0 0x66>, + <&dmac1 0x65>, <&dmac1 0x66>; + dma-names = "tx", "rx", "tx", "rx"; power-domains = <&sysc R8A7794_PD_ALWAYS_ON>; #address-cells = <1>; #size-cells = <0>; @@ -666,8 +687,9 @@ reg = <0 0xee200000 0 0x80>; interrupts = <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp3_clks R8A7794_CLK_MMCIF0>; - dmas = <&dmac0 0xd1>, <&dmac0 0xd2>; - dma-names = "tx", "rx"; + dmas = <&dmac0 0xd1>, <&dmac0 0xd2>, + <&dmac1 0xd1>, <&dmac1 0xd2>; + dma-names = "tx", "rx", "tx", "rx"; power-domains = <&sysc R8A7794_PD_ALWAYS_ON>; reg-io-width = <4>; status = "disabled"; @@ -678,6 +700,9 @@ reg = <0 0xee100000 0 0x200>; interrupts = <GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp3_clks R8A7794_CLK_SDHI0>; + dmas = <&dmac0 0xcd>, <&dmac0 0xce>, + <&dmac1 0xcd>, <&dmac1 0xce>; + dma-names = "tx", "rx", "tx", "rx"; power-domains = <&sysc R8A7794_PD_ALWAYS_ON>; status = "disabled"; }; @@ -687,6 +712,9 @@ reg = <0 0xee140000 0 0x100>; interrupts = <GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp3_clks R8A7794_CLK_SDHI1>; + dmas = <&dmac0 0xc1>, <&dmac0 0xc2>, + <&dmac1 0xc1>, <&dmac1 0xc2>; + dma-names = "tx", "rx", "tx", "rx"; power-domains = <&sysc R8A7794_PD_ALWAYS_ON>; status = "disabled"; }; @@ -696,6 +724,9 @@ reg = <0 0xee160000 0 0x100>; interrupts = <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp3_clks R8A7794_CLK_SDHI2>; + dmas = <&dmac0 0xd3>, <&dmac0 0xd4>, + <&dmac1 0xd3>, <&dmac1 0xd4>; + dma-names = "tx", "rx", "tx", "rx"; power-domains = <&sysc R8A7794_PD_ALWAYS_ON>; status = "disabled"; }; @@ -705,8 +736,9 @@ reg = <0 0xe6b10000 0 0x2c>; interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp9_clks R8A7794_CLK_QSPI_MOD>; - dmas = <&dmac0 0x17>, <&dmac0 0x18>; - dma-names = "tx", "rx"; + dmas = <&dmac0 0x17>, <&dmac0 0x18>, + <&dmac1 0x17>, <&dmac1 0x18>; + dma-names = "tx", "rx", "tx", "rx"; power-domains = <&sysc R8A7794_PD_ALWAYS_ON>; num-cs = <1>; #address-cells = <1>; diff --git a/arch/arm/boot/dts/rk3228-evb.dts b/arch/arm/boot/dts/rk3228-evb.dts index 5956e8246..904668e2e 100644 --- a/arch/arm/boot/dts/rk3228-evb.dts +++ b/arch/arm/boot/dts/rk3228-evb.dts @@ -40,7 +40,7 @@ /dts-v1/; -#include "rk3228.dtsi" +#include "rk322x.dtsi" / { model = "Rockchip RK3228 Evaluation board"; diff --git a/arch/arm/boot/dts/rk3229-evb.dts b/arch/arm/boot/dts/rk3229-evb.dts new file mode 100644 index 000000000..b6a12035a --- /dev/null +++ b/arch/arm/boot/dts/rk3229-evb.dts @@ -0,0 +1,90 @@ +/* + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; + +#include "rk322x.dtsi" + +/ { + model = "Rockchip RK3229 Evaluation board"; + compatible = "rockchip,rk3229-evb", "rockchip,rk3229"; + + memory { + device_type = "memory"; + reg = <0x60000000 0x40000000>; + }; + + ext_gmac: ext_gmac { + compatible = "fixed-clock"; + clock-frequency = <125000000>; + clock-output-names = "ext_gmac"; + #clock-cells = <0>; + }; + + vcc_phy: vcc-phy-regulator { + compatible = "regulator-fixed"; + enable-active-high; + regulator-name = "vcc_phy"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + }; +}; + +&gmac { + assigned-clocks = <&cru SCLK_MAC_EXTCLK>, <&cru SCLK_MAC>; + assigned-clock-parents = <&ext_gmac>, <&cru SCLK_MAC_EXTCLK>; + clock_in_out = "input"; + phy-supply = <&vcc_phy>; + phy-mode = "rgmii"; + pinctrl-names = "default"; + pinctrl-0 = <&rgmii_pins>; + snps,reset-gpio = <&gpio2 24 GPIO_ACTIVE_LOW>; + snps,reset-active-low; + snps,reset-delays-us = <0 10000 1000000>; + tx_delay = <0x30>; + rx_delay = <0x10>; + status = "okay"; +}; + +&uart2 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/rk322x.dtsi b/arch/arm/boot/dts/rk322x.dtsi new file mode 100644 index 000000000..9e6bf0e31 --- /dev/null +++ b/arch/arm/boot/dts/rk322x.dtsi @@ -0,0 +1,705 @@ +/* + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/pinctrl/rockchip.h> +#include <dt-bindings/clock/rk3228-cru.h> +#include <dt-bindings/thermal/thermal.h> +#include "skeleton.dtsi" + +/ { + interrupt-parent = <&gic>; + + aliases { + serial0 = &uart0; + serial1 = &uart1; + serial2 = &uart2; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu0: cpu@f00 { + device_type = "cpu"; + compatible = "arm,cortex-a7"; + reg = <0xf00>; + resets = <&cru SRST_CORE0>; + operating-points = < + /* KHz uV */ + 816000 1000000 + >; + #cooling-cells = <2>; /* min followed by max */ + clock-latency = <40000>; + clocks = <&cru ARMCLK>; + }; + + cpu1: cpu@f01 { + device_type = "cpu"; + compatible = "arm,cortex-a7"; + reg = <0xf01>; + resets = <&cru SRST_CORE1>; + }; + + cpu2: cpu@f02 { + device_type = "cpu"; + compatible = "arm,cortex-a7"; + reg = <0xf02>; + resets = <&cru SRST_CORE2>; + }; + + cpu3: cpu@f03 { + device_type = "cpu"; + compatible = "arm,cortex-a7"; + reg = <0xf03>; + resets = <&cru SRST_CORE3>; + }; + }; + + amba { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + pdma: pdma@110f0000 { + compatible = "arm,pl330", "arm,primecell"; + reg = <0x110f0000 0x4000>; + interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>; + #dma-cells = <1>; + clocks = <&cru ACLK_DMAC>; + clock-names = "apb_pclk"; + }; + }; + + arm-pmu { + compatible = "arm,cortex-a7-pmu"; + interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>; + interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>; + }; + + timer { + compatible = "arm,armv7-timer"; + arm,cpu-registers-not-fw-configured; + interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>, + <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>, + <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>, + <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>; + clock-frequency = <24000000>; + }; + + xin24m: oscillator { + compatible = "fixed-clock"; + clock-frequency = <24000000>; + clock-output-names = "xin24m"; + #clock-cells = <0>; + }; + + i2s1: i2s1@100b0000 { + compatible = "rockchip,rk3228-i2s", "rockchip,rk3066-i2s"; + reg = <0x100b0000 0x4000>; + interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + clock-names = "i2s_clk", "i2s_hclk"; + clocks = <&cru SCLK_I2S1>, <&cru HCLK_I2S1_8CH>; + dmas = <&pdma 14>, <&pdma 15>; + dma-names = "tx", "rx"; + pinctrl-names = "default"; + pinctrl-0 = <&i2s1_bus>; + status = "disabled"; + }; + + i2s0: i2s0@100c0000 { + compatible = "rockchip,rk3228-i2s", "rockchip,rk3066-i2s"; + reg = <0x100c0000 0x4000>; + interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + clock-names = "i2s_clk", "i2s_hclk"; + clocks = <&cru SCLK_I2S0>, <&cru HCLK_I2S0_8CH>; + dmas = <&pdma 11>, <&pdma 12>; + dma-names = "tx", "rx"; + status = "disabled"; + }; + + i2s2: i2s2@100e0000 { + compatible = "rockchip,rk3228-i2s", "rockchip,rk3066-i2s"; + reg = <0x100e0000 0x4000>; + interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + clock-names = "i2s_clk", "i2s_hclk"; + clocks = <&cru SCLK_I2S2>, <&cru HCLK_I2S2_2CH>; + dmas = <&pdma 0>, <&pdma 1>; + dma-names = "tx", "rx"; + status = "disabled"; + }; + + grf: syscon@11000000 { + compatible = "syscon"; + reg = <0x11000000 0x1000>; + }; + + uart0: serial@11010000 { + compatible = "snps,dw-apb-uart"; + reg = <0x11010000 0x100>; + interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>; + clock-frequency = <24000000>; + clocks = <&cru SCLK_UART0>, <&cru PCLK_UART0>; + clock-names = "baudclk", "apb_pclk"; + pinctrl-names = "default"; + pinctrl-0 = <&uart0_xfer &uart0_cts &uart0_rts>; + reg-shift = <2>; + reg-io-width = <4>; + status = "disabled"; + }; + + uart1: serial@11020000 { + compatible = "snps,dw-apb-uart"; + reg = <0x11020000 0x100>; + interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>; + clock-frequency = <24000000>; + clocks = <&cru SCLK_UART1>, <&cru PCLK_UART1>; + clock-names = "baudclk", "apb_pclk"; + pinctrl-names = "default"; + pinctrl-0 = <&uart1_xfer>; + reg-shift = <2>; + reg-io-width = <4>; + status = "disabled"; + }; + + uart2: serial@11030000 { + compatible = "snps,dw-apb-uart"; + reg = <0x11030000 0x100>; + interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>; + clock-frequency = <24000000>; + clocks = <&cru SCLK_UART2>, <&cru PCLK_UART2>; + clock-names = "baudclk", "apb_pclk"; + pinctrl-names = "default"; + pinctrl-0 = <&uart2_xfer>; + reg-shift = <2>; + reg-io-width = <4>; + status = "disabled"; + }; + + i2c0: i2c@11050000 { + compatible = "rockchip,rk3228-i2c"; + reg = <0x11050000 0x1000>; + interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + clock-names = "i2c"; + clocks = <&cru PCLK_I2C0>; + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_xfer>; + status = "disabled"; + }; + + i2c1: i2c@11060000 { + compatible = "rockchip,rk3228-i2c"; + reg = <0x11060000 0x1000>; + interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + clock-names = "i2c"; + clocks = <&cru PCLK_I2C1>; + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_xfer>; + status = "disabled"; + }; + + i2c2: i2c@11070000 { + compatible = "rockchip,rk3228-i2c"; + reg = <0x11070000 0x1000>; + interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + clock-names = "i2c"; + clocks = <&cru PCLK_I2C2>; + pinctrl-names = "default"; + pinctrl-0 = <&i2c2_xfer>; + status = "disabled"; + }; + + i2c3: i2c@11080000 { + compatible = "rockchip,rk3228-i2c"; + reg = <0x11080000 0x1000>; + interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + clock-names = "i2c"; + clocks = <&cru PCLK_I2C3>; + pinctrl-names = "default"; + pinctrl-0 = <&i2c3_xfer>; + status = "disabled"; + }; + + pwm0: pwm@110b0000 { + compatible = "rockchip,rk3288-pwm"; + reg = <0x110b0000 0x10>; + #pwm-cells = <3>; + clocks = <&cru PCLK_PWM>; + clock-names = "pwm"; + pinctrl-names = "default"; + pinctrl-0 = <&pwm0_pin>; + status = "disabled"; + }; + + pwm1: pwm@110b0010 { + compatible = "rockchip,rk3288-pwm"; + reg = <0x110b0010 0x10>; + #pwm-cells = <3>; + clocks = <&cru PCLK_PWM>; + clock-names = "pwm"; + pinctrl-names = "default"; + pinctrl-0 = <&pwm1_pin>; + status = "disabled"; + }; + + pwm2: pwm@110b0020 { + compatible = "rockchip,rk3288-pwm"; + reg = <0x110b0020 0x10>; + #pwm-cells = <3>; + clocks = <&cru PCLK_PWM>; + clock-names = "pwm"; + pinctrl-names = "default"; + pinctrl-0 = <&pwm2_pin>; + status = "disabled"; + }; + + pwm3: pwm@110b0030 { + compatible = "rockchip,rk3288-pwm"; + reg = <0x110b0030 0x10>; + #pwm-cells = <2>; + clocks = <&cru PCLK_PWM>; + clock-names = "pwm"; + pinctrl-names = "default"; + pinctrl-0 = <&pwm3_pin>; + status = "disabled"; + }; + + timer: timer@110c0000 { + compatible = "rockchip,rk3288-timer"; + reg = <0x110c0000 0x20>; + interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&xin24m>, <&cru PCLK_TIMER>; + clock-names = "timer", "pclk"; + }; + + cru: clock-controller@110e0000 { + compatible = "rockchip,rk3228-cru"; + reg = <0x110e0000 0x1000>; + rockchip,grf = <&grf>; + #clock-cells = <1>; + #reset-cells = <1>; + assigned-clocks = <&cru PLL_GPLL>; + assigned-clock-rates = <594000000>; + }; + + thermal-zones { + cpu_thermal: cpu-thermal { + polling-delay-passive = <100>; /* milliseconds */ + polling-delay = <5000>; /* milliseconds */ + + thermal-sensors = <&tsadc 0>; + + trips { + cpu_alert0: cpu_alert0 { + temperature = <70000>; /* millicelsius */ + hysteresis = <2000>; /* millicelsius */ + type = "passive"; + }; + cpu_alert1: cpu_alert1 { + temperature = <75000>; /* millicelsius */ + hysteresis = <2000>; /* millicelsius */ + type = "passive"; + }; + cpu_crit: cpu_crit { + temperature = <90000>; /* millicelsius */ + hysteresis = <2000>; /* millicelsius */ + type = "critical"; + }; + }; + + cooling-maps { + map0 { + trip = <&cpu_alert0>; + cooling-device = + <&cpu0 THERMAL_NO_LIMIT 6>; + }; + map1 { + trip = <&cpu_alert1>; + cooling-device = + <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; + }; + + tsadc: tsadc@11150000 { + compatible = "rockchip,rk3228-tsadc"; + reg = <0x11150000 0x100>; + interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru SCLK_TSADC>, <&cru PCLK_TSADC>; + clock-names = "tsadc", "apb_pclk"; + resets = <&cru SRST_TSADC>; + reset-names = "tsadc-apb"; + pinctrl-names = "init", "default", "sleep"; + pinctrl-0 = <&otp_gpio>; + pinctrl-1 = <&otp_out>; + pinctrl-2 = <&otp_gpio>; + #thermal-sensor-cells = <0>; + rockchip,hw-tshut-temp = <95000>; + status = "disabled"; + }; + + emmc: dwmmc@30020000 { + compatible = "rockchip,rk3288-dw-mshc"; + reg = <0x30020000 0x4000>; + interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>; + clock-frequency = <37500000>; + clock-freq-min-max = <400000 37500000>; + clocks = <&cru HCLK_EMMC>, <&cru SCLK_EMMC>, + <&cru SCLK_EMMC_DRV>, <&cru SCLK_EMMC_SAMPLE>; + clock-names = "biu", "ciu", "ciu_drv", "ciu_sample"; + bus-width = <8>; + default-sample-phase = <158>; + num-slots = <1>; + fifo-depth = <0x100>; + pinctrl-names = "default"; + pinctrl-0 = <&emmc_clk &emmc_cmd &emmc_bus8>; + status = "disabled"; + }; + + gmac: ethernet@30200000 { + compatible = "rockchip,rk3228-gmac"; + reg = <0x30200000 0x10000>; + interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "macirq"; + clocks = <&cru SCLK_MAC>, <&cru SCLK_MAC_RX>, + <&cru SCLK_MAC_TX>, <&cru SCLK_MAC_REF>, + <&cru SCLK_MAC_REFOUT>, <&cru ACLK_GMAC>, + <&cru PCLK_GMAC>; + clock-names = "stmmaceth", "mac_clk_rx", + "mac_clk_tx", "clk_mac_ref", + "clk_mac_refout", "aclk_mac", + "pclk_mac"; + resets = <&cru SRST_GMAC>; + reset-names = "stmmaceth"; + rockchip,grf = <&grf>; + status = "disabled"; + }; + + gic: interrupt-controller@32010000 { + compatible = "arm,gic-400"; + interrupt-controller; + #interrupt-cells = <3>; + #address-cells = <0>; + + reg = <0x32011000 0x1000>, + <0x32012000 0x1000>, + <0x32014000 0x2000>, + <0x32016000 0x2000>; + interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>; + }; + + pinctrl: pinctrl { + compatible = "rockchip,rk3228-pinctrl"; + rockchip,grf = <&grf>; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + gpio0: gpio0@11110000 { + compatible = "rockchip,gpio-bank"; + reg = <0x11110000 0x100>; + interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru PCLK_GPIO0>; + + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpio1: gpio1@11120000 { + compatible = "rockchip,gpio-bank"; + reg = <0x11120000 0x100>; + interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru PCLK_GPIO1>; + + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpio2: gpio2@11130000 { + compatible = "rockchip,gpio-bank"; + reg = <0x11130000 0x100>; + interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru PCLK_GPIO2>; + + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpio3: gpio3@11140000 { + compatible = "rockchip,gpio-bank"; + reg = <0x11140000 0x100>; + interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru PCLK_GPIO3>; + + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + pcfg_pull_up: pcfg-pull-up { + bias-pull-up; + }; + + pcfg_pull_down: pcfg-pull-down { + bias-pull-down; + }; + + pcfg_pull_none: pcfg-pull-none { + bias-disable; + }; + + pcfg_pull_none_drv_12ma: pcfg-pull-none-drv-12ma { + drive-strength = <12>; + }; + + emmc { + emmc_clk: emmc-clk { + rockchip,pins = <2 7 RK_FUNC_2 &pcfg_pull_none>; + }; + + emmc_cmd: emmc-cmd { + rockchip,pins = <1 22 RK_FUNC_2 &pcfg_pull_none>; + }; + + emmc_bus8: emmc-bus8 { + rockchip,pins = <1 24 RK_FUNC_2 &pcfg_pull_none>, + <1 25 RK_FUNC_2 &pcfg_pull_none>, + <1 26 RK_FUNC_2 &pcfg_pull_none>, + <1 27 RK_FUNC_2 &pcfg_pull_none>, + <1 28 RK_FUNC_2 &pcfg_pull_none>, + <1 29 RK_FUNC_2 &pcfg_pull_none>, + <1 30 RK_FUNC_2 &pcfg_pull_none>, + <1 31 RK_FUNC_2 &pcfg_pull_none>; + }; + }; + + gmac { + rgmii_pins: rgmii-pins { + rockchip,pins = <2 14 RK_FUNC_1 &pcfg_pull_none>, + <2 12 RK_FUNC_1 &pcfg_pull_none>, + <2 25 RK_FUNC_1 &pcfg_pull_none>, + <2 19 RK_FUNC_1 &pcfg_pull_none_drv_12ma>, + <2 18 RK_FUNC_1 &pcfg_pull_none_drv_12ma>, + <2 22 RK_FUNC_1 &pcfg_pull_none_drv_12ma>, + <2 23 RK_FUNC_1 &pcfg_pull_none_drv_12ma>, + <2 9 RK_FUNC_1 &pcfg_pull_none_drv_12ma>, + <2 13 RK_FUNC_1 &pcfg_pull_none_drv_12ma>, + <2 17 RK_FUNC_1 &pcfg_pull_none>, + <2 16 RK_FUNC_1 &pcfg_pull_none>, + <2 21 RK_FUNC_2 &pcfg_pull_none>, + <2 20 RK_FUNC_2 &pcfg_pull_none>, + <2 11 RK_FUNC_1 &pcfg_pull_none>, + <2 8 RK_FUNC_1 &pcfg_pull_none>; + }; + + rmii_pins: rmii-pins { + rockchip,pins = <2 14 RK_FUNC_1 &pcfg_pull_none>, + <2 12 RK_FUNC_1 &pcfg_pull_none>, + <2 25 RK_FUNC_1 &pcfg_pull_none>, + <2 19 RK_FUNC_1 &pcfg_pull_none_drv_12ma>, + <2 18 RK_FUNC_1 &pcfg_pull_none_drv_12ma>, + <2 13 RK_FUNC_1 &pcfg_pull_none_drv_12ma>, + <2 17 RK_FUNC_1 &pcfg_pull_none>, + <2 16 RK_FUNC_1 &pcfg_pull_none>, + <2 8 RK_FUNC_1 &pcfg_pull_none>, + <2 15 RK_FUNC_1 &pcfg_pull_none>; + }; + + phy_pins: phy-pins { + rockchip,pins = <2 14 RK_FUNC_2 &pcfg_pull_none>, + <2 8 RK_FUNC_2 &pcfg_pull_none>; + }; + }; + + i2c0 { + i2c0_xfer: i2c0-xfer { + rockchip,pins = <0 0 RK_FUNC_1 &pcfg_pull_none>, + <0 1 RK_FUNC_1 &pcfg_pull_none>; + }; + }; + + i2c1 { + i2c1_xfer: i2c1-xfer { + rockchip,pins = <0 2 RK_FUNC_1 &pcfg_pull_none>, + <0 3 RK_FUNC_1 &pcfg_pull_none>; + }; + }; + + i2c2 { + i2c2_xfer: i2c2-xfer { + rockchip,pins = <2 20 RK_FUNC_1 &pcfg_pull_none>, + <2 21 RK_FUNC_1 &pcfg_pull_none>; + }; + }; + + i2c3 { + i2c3_xfer: i2c3-xfer { + rockchip,pins = <0 6 RK_FUNC_1 &pcfg_pull_none>, + <0 7 RK_FUNC_1 &pcfg_pull_none>; + }; + }; + + i2s1 { + i2s1_bus: i2s1-bus { + rockchip,pins = <0 8 RK_FUNC_1 &pcfg_pull_none>, + <0 9 RK_FUNC_1 &pcfg_pull_none>, + <0 11 RK_FUNC_1 &pcfg_pull_none>, + <0 12 RK_FUNC_1 &pcfg_pull_none>, + <0 13 RK_FUNC_1 &pcfg_pull_none>, + <0 14 RK_FUNC_1 &pcfg_pull_none>, + <1 2 RK_FUNC_1 &pcfg_pull_none>, + <1 4 RK_FUNC_1 &pcfg_pull_none>, + <1 5 RK_FUNC_1 &pcfg_pull_none>; + }; + }; + + pwm0 { + pwm0_pin: pwm0-pin { + rockchip,pins = <3 21 RK_FUNC_1 &pcfg_pull_none>; + }; + }; + + pwm1 { + pwm1_pin: pwm1-pin { + rockchip,pins = <0 30 RK_FUNC_2 &pcfg_pull_none>; + }; + }; + + pwm2 { + pwm2_pin: pwm2-pin { + rockchip,pins = <1 12 RK_FUNC_2 &pcfg_pull_none>; + }; + }; + + pwm3 { + pwm3_pin: pwm3-pin { + rockchip,pins = <1 11 RK_FUNC_2 &pcfg_pull_none>; + }; + }; + + tsadc { + otp_gpio: otp-gpio { + rockchip,pins = <0 24 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + otp_out: otp-out { + rockchip,pins = <0 24 RK_FUNC_2 &pcfg_pull_none>; + }; + }; + + uart0 { + uart0_xfer: uart0-xfer { + rockchip,pins = <2 26 RK_FUNC_1 &pcfg_pull_none>, + <2 27 RK_FUNC_1 &pcfg_pull_none>; + }; + + uart0_cts: uart0-cts { + rockchip,pins = <2 29 RK_FUNC_1 &pcfg_pull_none>; + }; + + uart0_rts: uart0-rts { + rockchip,pins = <0 17 RK_FUNC_1 &pcfg_pull_none>; + }; + }; + + uart1 { + uart1_xfer: uart1-xfer { + rockchip,pins = <1 9 RK_FUNC_1 &pcfg_pull_none>, + <1 10 RK_FUNC_1 &pcfg_pull_none>; + }; + + uart1_cts: uart1-cts { + rockchip,pins = <1 8 RK_FUNC_1 &pcfg_pull_none>; + }; + + uart1_rts: uart1-rts { + rockchip,pins = <1 11 RK_FUNC_1 &pcfg_pull_none>; + }; + }; + + uart2 { + uart2_xfer: uart2-xfer { + rockchip,pins = <1 18 RK_FUNC_2 &pcfg_pull_none>, + <1 19 RK_FUNC_2 &pcfg_pull_none>; + }; + + uart2_cts: uart2-cts { + rockchip,pins = <0 25 RK_FUNC_1 &pcfg_pull_none>; + }; + + uart2_rts: uart2-rts { + rockchip,pins = <0 24 RK_FUNC_1 &pcfg_pull_none>; + }; + }; + }; +}; diff --git a/arch/arm/boot/dts/rk3288-firefly.dtsi b/arch/arm/boot/dts/rk3288-firefly.dtsi index d6cf9ada1..114c90fb6 100644 --- a/arch/arm/boot/dts/rk3288-firefly.dtsi +++ b/arch/arm/boot/dts/rk3288-firefly.dtsi @@ -64,22 +64,6 @@ clock-output-names = "ext_gmac"; }; - io_domains: io-domains { - compatible = "rockchip,rk3288-io-voltage-domain"; - rockchip,grf = <&grf>; - - audio-supply = <&vcca_33>; - bb-supply = <&vcc_io>; - dvp-supply = <&dovdd_1v8>; - flash0-supply = <&vcc_flash>; - flash1-supply = <&vcc_lan>; - gpio30-supply = <&vcc_io>; - gpio1830-supply = <&vcc_io>; - lcdc-supply = <&vcc_io>; - sdcard-supply = <&vccio_sd>; - wifi-supply = <&vccio_wl>; - }; - ir: ir-receiver { compatible = "gpio-ir-receiver"; pinctrl-names = "default"; @@ -397,6 +381,21 @@ status = "okay"; }; +&io_domains { + status = "okay"; + + audio-supply = <&vcca_33>; + bb-supply = <&vcc_io>; + dvp-supply = <&dovdd_1v8>; + flash0-supply = <&vcc_flash>; + flash1-supply = <&vcc_lan>; + gpio30-supply = <&vcc_io>; + gpio1830-supply = <&vcc_io>; + lcdc-supply = <&vcc_io>; + sdcard-supply = <&vccio_sd>; + wifi-supply = <&vccio_wl>; +}; + &pinctrl { pcfg_output_high: pcfg-output-high { output-high; diff --git a/arch/arm/boot/dts/rk3288-miqi.dts b/arch/arm/boot/dts/rk3288-miqi.dts index 8643103d8..24488421f 100644 --- a/arch/arm/boot/dts/rk3288-miqi.dts +++ b/arch/arm/boot/dts/rk3288-miqi.dts @@ -64,19 +64,6 @@ clock-output-names = "ext_gmac"; }; - io_domains: io-domains { - compatible = "rockchip,rk3288-io-voltage-domain"; - - audio-supply = <&vcca_33>; - flash0-supply = <&vcc_flash>; - flash1-supply = <&vcc_lan>; - gpio30-supply = <&vcc_io>; - gpio1830-supply = <&vcc_io>; - lcdc-supply = <&vcc_io>; - sdcard-supply = <&vccio_sd>; - wifi-supply = <&vcc_18>; - }; - leds { compatible = "gpio-leds"; @@ -321,6 +308,19 @@ status = "okay"; }; +&io_domains { + status = "okay"; + + audio-supply = <&vcca_33>; + flash0-supply = <&vcc_flash>; + flash1-supply = <&vcc_lan>; + gpio30-supply = <&vcc_io>; + gpio1830-supply = <&vcc_io>; + lcdc-supply = <&vcc_io>; + sdcard-supply = <&vccio_sd>; + wifi-supply = <&vcc_18>; +}; + &pinctrl { pcfg_output_high: pcfg-output-high { output-high; diff --git a/arch/arm/boot/dts/rk3288-popmetal.dts b/arch/arm/boot/dts/rk3288-popmetal.dts index 720717bb3..dda8d259b 100644 --- a/arch/arm/boot/dts/rk3288-popmetal.dts +++ b/arch/arm/boot/dts/rk3288-popmetal.dts @@ -77,22 +77,6 @@ }; }; - io_domains: io-domains { - compatible = "rockchip,rk3288-io-voltage-domain"; - rockchip,grf = <&grf>; - - audio-supply = <&vcca_33>; - bb-supply = <&vcc_io>; - dvp-supply = <&vcc18_dvp>; - flash0-supply = <&vcc_flash>; - flash1-supply = <&vcc_lan>; - gpio30-supply = <&vcc_io>; - gpio1830-supply = <&vcc_io>; - lcdc-supply = <&vcc_io>; - sdcard-supply = <&vccio_sd>; - wifi-supply = <&vccio_wl>; - }; - ir: ir-receiver { compatible = "gpio-ir-receiver"; gpios = <&gpio0 6 GPIO_ACTIVE_LOW>; @@ -437,6 +421,21 @@ status = "okay"; }; +&io_domains { + status = "okay"; + + audio-supply = <&vcca_33>; + bb-supply = <&vcc_io>; + dvp-supply = <&vcc18_dvp>; + flash0-supply = <&vcc_flash>; + flash1-supply = <&vcc_lan>; + gpio30-supply = <&vcc_io>; + gpio1830-supply = <&vcc_io>; + lcdc-supply = <&vcc_io>; + sdcard-supply = <&vccio_sd>; + wifi-supply = <&vccio_wl>; +}; + &pinctrl { ak8963 { comp_int: comp-int { diff --git a/arch/arm/boot/dts/rk3288-rock2-som.dtsi b/arch/arm/boot/dts/rk3288-rock2-som.dtsi index e1ee9f949..bb1f01e03 100644 --- a/arch/arm/boot/dts/rk3288-rock2-som.dtsi +++ b/arch/arm/boot/dts/rk3288-rock2-som.dtsi @@ -61,22 +61,6 @@ clock-output-names = "ext_gmac"; }; - io_domains: io-domains { - compatible = "rockchip,rk3288-io-voltage-domain"; - rockchip,grf = <&grf>; - - audio-supply = <&vcc_io>; - bb-supply = <&vcc_io>; - dvp-supply = <&vcc_18>; - flash0-supply = <&vcc_flash>; - flash1-supply = <&vccio_pmu>; - gpio30-supply = <&vccio_pmu>; - gpio1830 = <&vcc_io>; - lcdc-supply = <&vcc_io>; - sdcard-supply = <&vccio_sd>; - wifi-supply = <&vcc_18>; - }; - vcc_flash: flash-regulator { compatible = "regulator-fixed"; regulator-name = "vcc_sys"; @@ -259,6 +243,21 @@ }; }; +&io_domains { + status = "okay"; + + audio-supply = <&vcc_io>; + bb-supply = <&vcc_io>; + dvp-supply = <&vcc_18>; + flash0-supply = <&vcc_flash>; + flash1-supply = <&vccio_pmu>; + gpio30-supply = <&vccio_pmu>; + gpio1830 = <&vcc_io>; + lcdc-supply = <&vcc_io>; + sdcard-supply = <&vccio_sd>; + wifi-supply = <&vcc_18>; +}; + &pinctrl { pcfg_output_high: pcfg-output-high { output-high; diff --git a/arch/arm/boot/dts/rk3288-veyron-analog-audio.dtsi b/arch/arm/boot/dts/rk3288-veyron-analog-audio.dtsi new file mode 100644 index 000000000..6d105914a --- /dev/null +++ b/arch/arm/boot/dts/rk3288-veyron-analog-audio.dtsi @@ -0,0 +1,101 @@ +/* + * Google Veyron (and derivatives) fragment for the max98090 audio + * codec and analog headphone jack. + * + * Copyright 2016 Google, Inc + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +/ { + sound { + compatible = "rockchip,rockchip-audio-max98090"; + pinctrl-names = "default"; + pinctrl-0 = <&mic_det>, <&hp_det>; + rockchip,model = "VEYRON-I2S"; + rockchip,i2s-controller = <&i2s>; + rockchip,audio-codec = <&max98090>; + rockchip,hp-det-gpios = <&gpio6 5 GPIO_ACTIVE_HIGH>; + rockchip,mic-det-gpios = <&gpio6 11 GPIO_ACTIVE_LOW>; + rockchip,headset-codec = <&headsetcodec>; + }; +}; + +&i2c2 { + max98090: max98090@10 { + compatible = "maxim,max98090"; + reg = <0x10>; + interrupt-parent = <&gpio6>; + interrupts = <7 IRQ_TYPE_EDGE_FALLING>; + clock-names = "mclk"; + clocks = <&cru SCLK_I2S0_OUT>; + pinctrl-names = "default"; + pinctrl-0 = <&int_codec>; + }; +}; + +&i2c4 { + headsetcodec: ts3a227e@3b { + compatible = "ti,ts3a227e"; + reg = <0x3b>; + interrupt-parent = <&gpio0>; + interrupts = <3 IRQ_TYPE_LEVEL_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&ts3a227e_int_l>; + ti,micbias = <7>; /* MICBIAS = 2.8V */ + }; +}; + +&i2s { + status = "okay"; +}; + +&io_domains { + audio-supply = <&vcc18_codec>; +}; + +&rk808 { + vcc10-supply = <&vcc33_sys>; + + regulators { + vcc18_codec: LDO_REG6 { + regulator-name = "vcc18_codec"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + }; +}; + +&pinctrl { + codec { + hp_det: hp-det { + rockchip,pins = <6 5 RK_FUNC_GPIO &pcfg_pull_up>; + }; + + /* + * HACK: We're going to _pull down_ this _active low_ interrupt + * so that it never fires. We don't need this interrupt because + * we've got a ts3a227e chip but the driver requires it. + */ + int_codec: int-codec { + rockchip,pins = <6 7 RK_FUNC_GPIO &pcfg_pull_down>; + }; + + mic_det: mic-det { + rockchip,pins = <6 11 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; + + headset { + ts3a227e_int_l: ts3a227e-int-l { + rockchip,pins = <0 3 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; +}; diff --git a/arch/arm/boot/dts/rk3288-veyron-chromebook.dtsi b/arch/arm/boot/dts/rk3288-veyron-chromebook.dtsi index 2958c36d1..ce1f87980 100644 --- a/arch/arm/boot/dts/rk3288-veyron-chromebook.dtsi +++ b/arch/arm/boot/dts/rk3288-veyron-chromebook.dtsi @@ -46,6 +46,7 @@ #include <dt-bindings/clock/rockchip,rk808.h> #include <dt-bindings/input/input.h> #include "rk3288-veyron.dtsi" +#include "rk3288-veyron-analog-audio.dtsi" #include "rk3288-veyron-sdmmc.dtsi" / { diff --git a/arch/arm/boot/dts/rk3288-veyron.dtsi b/arch/arm/boot/dts/rk3288-veyron.dtsi index b2557bf5a..3dd2cca48 100644 --- a/arch/arm/boot/dts/rk3288-veyron.dtsi +++ b/arch/arm/boot/dts/rk3288-veyron.dtsi @@ -83,19 +83,6 @@ reset-gpios = <&gpio2 9 GPIO_ACTIVE_HIGH>; }; - io_domains: io-domains { - compatible = "rockchip,rk3288-io-voltage-domain"; - rockchip,grf = <&grf>; - - bb-supply = <&vcc33_io>; - dvp-supply = <&vcc_18>; - flash0-supply = <&vcc18_flashio>; - gpio1830-supply = <&vcc33_io>; - gpio30-supply = <&vcc33_io>; - lcdc-supply = <&vcc33_lcd>; - wifi-supply = <&vcc18_wl>; - }; - sdio_pwrseq: sdio-pwrseq { compatible = "mmc-pwrseq-simple"; clocks = <&rk808 RK808_CLKOUT1>; @@ -355,6 +342,18 @@ i2c-scl-rising-time-ns = <1000>; }; +&io_domains { + status = "okay"; + + bb-supply = <&vcc33_io>; + dvp-supply = <&vcc_18>; + flash0-supply = <&vcc18_flashio>; + gpio1830-supply = <&vcc33_io>; + gpio30-supply = <&vcc33_io>; + lcdc-supply = <&vcc33_lcd>; + wifi-supply = <&vcc18_wl>; +}; + &pwm1 { status = "okay"; }; @@ -383,6 +382,12 @@ status = "okay"; rx-sample-delay-ns = <12>; + + flash@0 { + compatible = "jedec,spi-nor"; + spi-max-frequency = <50000000>; + reg = <0>; + }; }; &tsadc { diff --git a/arch/arm/boot/dts/rk3288.dtsi b/arch/arm/boot/dts/rk3288.dtsi index fd77e10b4..91c4b3c7a 100644 --- a/arch/arm/boot/dts/rk3288.dtsi +++ b/arch/arm/boot/dts/rk3288.dtsi @@ -541,8 +541,9 @@ gmac: ethernet@ff290000 { compatible = "rockchip,rk3288-gmac"; reg = <0xff290000 0x10000>; - interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "macirq"; + interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "macirq", "eth_wake_irq"; rockchip,grf = <&grf>; clocks = <&cru SCLK_MAC>, <&cru SCLK_MAC_RX>, <&cru SCLK_MAC_TX>, @@ -828,6 +829,11 @@ #phy-cells = <0>; status = "disabled"; }; + + io_domains: io-domains { + compatible = "rockchip,rk3288-io-voltage-domain"; + status = "disabled"; + }; }; wdt: watchdog@ff800000 { diff --git a/arch/arm/boot/dts/sama5d2.dtsi b/arch/arm/boot/dts/sama5d2.dtsi index 2827e7ab5..353d0e5ec 100644 --- a/arch/arm/boot/dts/sama5d2.dtsi +++ b/arch/arm/boot/dts/sama5d2.dtsi @@ -72,6 +72,11 @@ }; }; + pmu { + compatible = "arm,cortex-a5-pmu"; + interrupts = <2 IRQ_TYPE_LEVEL_HIGH 0>; + }; + memory { reg = <0x20000000 0x20000000>; }; @@ -112,13 +117,13 @@ clock-names = "pclk", "hclk"; status = "disabled"; - ep0 { + ep@0 { reg = <0>; atmel,fifo-size = <64>; atmel,nb-banks = <1>; }; - ep1 { + ep@1 { reg = <1>; atmel,fifo-size = <1024>; atmel,nb-banks = <3>; @@ -126,7 +131,7 @@ atmel,can-isoc; }; - ep2 { + ep@2 { reg = <2>; atmel,fifo-size = <1024>; atmel,nb-banks = <3>; @@ -134,7 +139,7 @@ atmel,can-isoc; }; - ep3 { + ep@3 { reg = <3>; atmel,fifo-size = <1024>; atmel,nb-banks = <2>; @@ -142,7 +147,7 @@ atmel,can-isoc; }; - ep4 { + ep@4 { reg = <4>; atmel,fifo-size = <1024>; atmel,nb-banks = <2>; @@ -150,7 +155,7 @@ atmel,can-isoc; }; - ep5 { + ep@5 { reg = <5>; atmel,fifo-size = <1024>; atmel,nb-banks = <2>; @@ -158,7 +163,7 @@ atmel,can-isoc; }; - ep6 { + ep@6 { reg = <6>; atmel,fifo-size = <1024>; atmel,nb-banks = <2>; @@ -166,7 +171,7 @@ atmel,can-isoc; }; - ep7 { + ep@7 { reg = <7>; atmel,fifo-size = <1024>; atmel,nb-banks = <2>; @@ -174,56 +179,56 @@ atmel,can-isoc; }; - ep8 { + ep@8 { reg = <8>; atmel,fifo-size = <1024>; atmel,nb-banks = <2>; atmel,can-isoc; }; - ep9 { + ep@9 { reg = <9>; atmel,fifo-size = <1024>; atmel,nb-banks = <2>; atmel,can-isoc; }; - ep10 { + ep@10 { reg = <10>; atmel,fifo-size = <1024>; atmel,nb-banks = <2>; atmel,can-isoc; }; - ep11 { + ep@11 { reg = <11>; atmel,fifo-size = <1024>; atmel,nb-banks = <2>; atmel,can-isoc; }; - ep12 { + ep@12 { reg = <12>; atmel,fifo-size = <1024>; atmel,nb-banks = <2>; atmel,can-isoc; }; - ep13 { + ep@13 { reg = <13>; atmel,fifo-size = <1024>; atmel,nb-banks = <2>; atmel,can-isoc; }; - ep14 { + ep@14 { reg = <14>; atmel,fifo-size = <1024>; atmel,nb-banks = <2>; atmel,can-isoc; }; - ep15 { + ep@15 { reg = <15>; atmel,fifo-size = <1024>; atmel,nb-banks = <2>; @@ -232,7 +237,7 @@ }; usb1: ohci@00400000 { - compatible = "atmel,at91rm9200-ohci", "usb-ohci"; + compatible = "atmel,sama5d2-ohci", "usb-ohci"; reg = <0x00400000 0x100000>; interrupts = <41 IRQ_TYPE_LEVEL_HIGH 2>; clocks = <&uhphs_clk>, <&uhphs_clk>, <&uhpck>; diff --git a/arch/arm/boot/dts/sama5d3.dtsi b/arch/arm/boot/dts/sama5d3.dtsi index 36301bd9a..4c84d333f 100644 --- a/arch/arm/boot/dts/sama5d3.dtsi +++ b/arch/arm/boot/dts/sama5d3.dtsi @@ -326,26 +326,22 @@ atmel,adc-res-names = "lowres", "highres"; status = "disabled"; - trigger@0 { - reg = <0>; + trigger0 { trigger-name = "external-rising"; trigger-value = <0x1>; trigger-external; }; - trigger@1 { - reg = <1>; + trigger1 { trigger-name = "external-falling"; trigger-value = <0x2>; trigger-external; }; - trigger@2 { - reg = <2>; + trigger2 { trigger-name = "external-any"; trigger-value = <0x3>; trigger-external; }; - trigger@3 { - reg = <3>; + trigger3 { trigger-name = "continuous"; trigger-value = <0x6>; }; @@ -1341,13 +1337,13 @@ clock-names = "pclk", "hclk"; status = "disabled"; - ep0 { + ep@0 { reg = <0>; atmel,fifo-size = <64>; atmel,nb-banks = <1>; }; - ep1 { + ep@1 { reg = <1>; atmel,fifo-size = <1024>; atmel,nb-banks = <3>; @@ -1355,7 +1351,7 @@ atmel,can-isoc; }; - ep2 { + ep@2 { reg = <2>; atmel,fifo-size = <1024>; atmel,nb-banks = <3>; @@ -1363,84 +1359,84 @@ atmel,can-isoc; }; - ep3 { + ep@3 { reg = <3>; atmel,fifo-size = <1024>; atmel,nb-banks = <2>; atmel,can-dma; }; - ep4 { + ep@4 { reg = <4>; atmel,fifo-size = <1024>; atmel,nb-banks = <2>; atmel,can-dma; }; - ep5 { + ep@5 { reg = <5>; atmel,fifo-size = <1024>; atmel,nb-banks = <2>; atmel,can-dma; }; - ep6 { + ep@6 { reg = <6>; atmel,fifo-size = <1024>; atmel,nb-banks = <2>; atmel,can-dma; }; - ep7 { + ep@7 { reg = <7>; atmel,fifo-size = <1024>; atmel,nb-banks = <2>; atmel,can-dma; }; - ep8 { + ep@8 { reg = <8>; atmel,fifo-size = <1024>; atmel,nb-banks = <2>; }; - ep9 { + ep@9 { reg = <9>; atmel,fifo-size = <1024>; atmel,nb-banks = <2>; }; - ep10 { + ep@10 { reg = <10>; atmel,fifo-size = <1024>; atmel,nb-banks = <2>; }; - ep11 { + ep@11 { reg = <11>; atmel,fifo-size = <1024>; atmel,nb-banks = <2>; }; - ep12 { + ep@12 { reg = <12>; atmel,fifo-size = <1024>; atmel,nb-banks = <2>; }; - ep13 { + ep@13 { reg = <13>; atmel,fifo-size = <1024>; atmel,nb-banks = <2>; }; - ep14 { + ep@14 { reg = <14>; atmel,fifo-size = <1024>; atmel,nb-banks = <2>; }; - ep15 { + ep@15 { reg = <15>; atmel,fifo-size = <1024>; atmel,nb-banks = <2>; diff --git a/arch/arm/boot/dts/sama5d31ek.dts b/arch/arm/boot/dts/sama5d31ek.dts index 04eec0dfc..25e4c0b2d 100644 --- a/arch/arm/boot/dts/sama5d31ek.dts +++ b/arch/arm/boot/dts/sama5d31ek.dts @@ -9,6 +9,7 @@ /dts-v1/; #include "sama5d31.dtsi" #include "sama5d3xmb.dtsi" +#include "sama5d3xmb_emac.dtsi" #include "sama5d3xdm.dtsi" / { diff --git a/arch/arm/boot/dts/sama5d33ek.dts b/arch/arm/boot/dts/sama5d33ek.dts index cbd6a3ff1..c517b87a1 100644 --- a/arch/arm/boot/dts/sama5d33ek.dts +++ b/arch/arm/boot/dts/sama5d33ek.dts @@ -9,6 +9,7 @@ /dts-v1/; #include "sama5d33.dtsi" #include "sama5d3xmb.dtsi" +#include "sama5d3xmb_gmac.dtsi" #include "sama5d3xdm.dtsi" / { diff --git a/arch/arm/boot/dts/sama5d34ek.dts b/arch/arm/boot/dts/sama5d34ek.dts index 878aa1642..c8b8449fd 100644 --- a/arch/arm/boot/dts/sama5d34ek.dts +++ b/arch/arm/boot/dts/sama5d34ek.dts @@ -9,6 +9,7 @@ /dts-v1/; #include "sama5d34.dtsi" #include "sama5d3xmb.dtsi" +#include "sama5d3xmb_gmac.dtsi" #include "sama5d3xdm.dtsi" / { diff --git a/arch/arm/boot/dts/sama5d35ek.dts b/arch/arm/boot/dts/sama5d35ek.dts index e812f5c1b..6e261fcf5 100644 --- a/arch/arm/boot/dts/sama5d35ek.dts +++ b/arch/arm/boot/dts/sama5d35ek.dts @@ -9,6 +9,8 @@ /dts-v1/; #include "sama5d35.dtsi" #include "sama5d3xmb.dtsi" +#include "sama5d3xmb_emac.dtsi" +#include "sama5d3xmb_gmac.dtsi" / { model = "Atmel SAMA5D35-EK"; diff --git a/arch/arm/boot/dts/sama5d36ek.dts b/arch/arm/boot/dts/sama5d36ek.dts index 59576c6f9..cd458b85a 100644 --- a/arch/arm/boot/dts/sama5d36ek.dts +++ b/arch/arm/boot/dts/sama5d36ek.dts @@ -10,6 +10,8 @@ #include "sama5d36.dtsi" #include "sama5d3xmb.dtsi" #include "sama5d3xdm.dtsi" +#include "sama5d3xmb_emac.dtsi" +#include "sama5d3xmb_gmac.dtsi" / { model = "Atmel SAMA5D36-EK"; diff --git a/arch/arm/boot/dts/sama5d3xcm.dtsi b/arch/arm/boot/dts/sama5d3xcm.dtsi index 2cf9c3611..b5e111b29 100644 --- a/arch/arm/boot/dts/sama5d3xcm.dtsi +++ b/arch/arm/boot/dts/sama5d3xcm.dtsi @@ -34,40 +34,6 @@ spi0: spi@f0004000 { cs-gpios = <&pioD 13 0>, <0>, <0>, <0>; }; - - macb0: ethernet@f0028000 { - phy-mode = "rgmii"; - #address-cells = <1>; - #size-cells = <0>; - - ethernet-phy@1 { - reg = <0x1>; - interrupt-parent = <&pioB>; - interrupts = <25 IRQ_TYPE_EDGE_FALLING>; - txen-skew-ps = <800>; - txc-skew-ps = <3000>; - rxdv-skew-ps = <400>; - rxc-skew-ps = <3000>; - rxd0-skew-ps = <400>; - rxd1-skew-ps = <400>; - rxd2-skew-ps = <400>; - rxd3-skew-ps = <400>; - }; - - ethernet-phy@7 { - reg = <0x7>; - interrupt-parent = <&pioB>; - interrupts = <25 IRQ_TYPE_EDGE_FALLING>; - txen-skew-ps = <800>; - txc-skew-ps = <3000>; - rxdv-skew-ps = <400>; - rxc-skew-ps = <3000>; - rxd0-skew-ps = <400>; - rxd1-skew-ps = <400>; - rxd2-skew-ps = <400>; - rxd3-skew-ps = <400>; - }; - }; }; nand0: nand@60000000 { diff --git a/arch/arm/boot/dts/sama5d3xmb.dtsi b/arch/arm/boot/dts/sama5d3xmb.dtsi index 890104228..6d252ad05 100644 --- a/arch/arm/boot/dts/sama5d3xmb.dtsi +++ b/arch/arm/boot/dts/sama5d3xmb.dtsi @@ -117,18 +117,6 @@ status = "okay"; }; - macb1: ethernet@f802c000 { - phy-mode = "rmii"; - - #address-cells = <1>; - #size-cells = <0>; - phy0: ethernet-phy@1 { - interrupt-parent = <&pioE>; - interrupts = <30 IRQ_TYPE_EDGE_FALLING>; - reg = <1>; - }; - }; - pinctrl@fffff200 { board { pinctrl_mmc0_cd: mmc0_cd { diff --git a/arch/arm/boot/dts/sama5d3xmb_emac.dtsi b/arch/arm/boot/dts/sama5d3xmb_emac.dtsi new file mode 100644 index 000000000..2fd14f371 --- /dev/null +++ b/arch/arm/boot/dts/sama5d3xmb_emac.dtsi @@ -0,0 +1,26 @@ +/* + * sama5d3xmb_emac.dts - Device Tree Include file for SAMA5D3x mother board + * Ethernet + * + * Copyright (C) 2016 Atmel, + * + * Licensed under GPLv2 or later. + */ + +/ { + ahb { + apb { + macb1: ethernet@f802c000 { + phy-mode = "rmii"; + + #address-cells = <1>; + #size-cells = <0>; + phy0: ethernet-phy@1 { + interrupt-parent = <&pioE>; + interrupts = <30 IRQ_TYPE_EDGE_FALLING>; + reg = <1>; + }; + }; + }; + }; +}; diff --git a/arch/arm/boot/dts/sama5d3xmb_gmac.dtsi b/arch/arm/boot/dts/sama5d3xmb_gmac.dtsi new file mode 100644 index 000000000..65aea7a75 --- /dev/null +++ b/arch/arm/boot/dts/sama5d3xmb_gmac.dtsi @@ -0,0 +1,48 @@ +/* + * sama5d3xmb_gmac.dtsi - Device Tree Include file for SAMA5D3x motherboard + * Gigabit Ethernet + * + * Copyright (C) 2016 Atmel, + * + * Licensed under GPLv2 or later. + */ + +/ { + ahb { + apb { + macb0: ethernet@f0028000 { + phy-mode = "rgmii"; + #address-cells = <1>; + #size-cells = <0>; + + ethernet-phy@1 { + reg = <0x1>; + interrupt-parent = <&pioB>; + interrupts = <25 IRQ_TYPE_EDGE_FALLING>; + txen-skew-ps = <800>; + txc-skew-ps = <3000>; + rxdv-skew-ps = <400>; + rxc-skew-ps = <3000>; + rxd0-skew-ps = <400>; + rxd1-skew-ps = <400>; + rxd2-skew-ps = <400>; + rxd3-skew-ps = <400>; + }; + + ethernet-phy@7 { + reg = <0x7>; + interrupt-parent = <&pioB>; + interrupts = <25 IRQ_TYPE_EDGE_FALLING>; + txen-skew-ps = <800>; + txc-skew-ps = <3000>; + rxdv-skew-ps = <400>; + rxc-skew-ps = <3000>; + rxd0-skew-ps = <400>; + rxd1-skew-ps = <400>; + rxd2-skew-ps = <400>; + rxd3-skew-ps = <400>; + }; + }; + }; + }; +}; diff --git a/arch/arm/boot/dts/sama5d4.dtsi b/arch/arm/boot/dts/sama5d4.dtsi index 4e2cc30d6..65e725fb5 100644 --- a/arch/arm/boot/dts/sama5d4.dtsi +++ b/arch/arm/boot/dts/sama5d4.dtsi @@ -135,13 +135,13 @@ clock-names = "pclk", "hclk"; status = "disabled"; - ep0 { + ep@0 { reg = <0>; atmel,fifo-size = <64>; atmel,nb-banks = <1>; }; - ep1 { + ep@1 { reg = <1>; atmel,fifo-size = <1024>; atmel,nb-banks = <3>; @@ -149,7 +149,7 @@ atmel,can-isoc; }; - ep2 { + ep@2 { reg = <2>; atmel,fifo-size = <1024>; atmel,nb-banks = <3>; @@ -157,7 +157,7 @@ atmel,can-isoc; }; - ep3 { + ep@3 { reg = <3>; atmel,fifo-size = <1024>; atmel,nb-banks = <2>; @@ -165,7 +165,7 @@ atmel,can-isoc; }; - ep4 { + ep@4 { reg = <4>; atmel,fifo-size = <1024>; atmel,nb-banks = <2>; @@ -173,7 +173,7 @@ atmel,can-isoc; }; - ep5 { + ep@5 { reg = <5>; atmel,fifo-size = <1024>; atmel,nb-banks = <2>; @@ -181,7 +181,7 @@ atmel,can-isoc; }; - ep6 { + ep@6 { reg = <6>; atmel,fifo-size = <1024>; atmel,nb-banks = <2>; @@ -189,7 +189,7 @@ atmel,can-isoc; }; - ep7 { + ep@7 { reg = <7>; atmel,fifo-size = <1024>; atmel,nb-banks = <2>; @@ -197,56 +197,56 @@ atmel,can-isoc; }; - ep8 { + ep@8 { reg = <8>; atmel,fifo-size = <1024>; atmel,nb-banks = <2>; atmel,can-isoc; }; - ep9 { + ep@9 { reg = <9>; atmel,fifo-size = <1024>; atmel,nb-banks = <2>; atmel,can-isoc; }; - ep10 { + ep@10 { reg = <10>; atmel,fifo-size = <1024>; atmel,nb-banks = <2>; atmel,can-isoc; }; - ep11 { + ep@11 { reg = <11>; atmel,fifo-size = <1024>; atmel,nb-banks = <2>; atmel,can-isoc; }; - ep12 { + ep@12 { reg = <12>; atmel,fifo-size = <1024>; atmel,nb-banks = <2>; atmel,can-isoc; }; - ep13 { + ep@13 { reg = <13>; atmel,fifo-size = <1024>; atmel,nb-banks = <2>; atmel,can-isoc; }; - ep14 { + ep@14 { reg = <14>; atmel,fifo-size = <1024>; atmel,nb-banks = <2>; atmel,can-isoc; }; - ep15 { + ep@15 { reg = <15>; atmel,fifo-size = <1024>; atmel,nb-banks = <2>; @@ -1226,22 +1226,22 @@ atmel,adc-ts-pressure-threshold = <10000>; status = "disabled"; - trigger@0 { + trigger0 { trigger-name = "external-rising"; trigger-value = <0x1>; trigger-external; }; - trigger@1 { + trigger1 { trigger-name = "external-falling"; trigger-value = <0x2>; trigger-external; }; - trigger@2 { + trigger2 { trigger-name = "external-any"; trigger-value = <0x3>; trigger-external; }; - trigger@3 { + trigger3 { trigger-name = "continuous"; trigger-value = <0x6>; }; diff --git a/arch/arm/boot/dts/sh73a0-kzm9g.dts b/arch/arm/boot/dts/sh73a0-kzm9g.dts index c2d8a080e..3d65f1f6d 100644 --- a/arch/arm/boot/dts/sh73a0-kzm9g.dts +++ b/arch/arm/boot/dts/sh73a0-kzm9g.dts @@ -22,7 +22,7 @@ compatible = "renesas,kzm9g", "renesas,sh73a0"; aliases { - serial4 = &scifa4; + serial0 = &scifa4; }; cpus { @@ -39,16 +39,16 @@ }; chosen { - bootargs = "console=tty0 console=ttySC4,115200 root=/dev/nfs ip=dhcp ignore_loglevel rw"; - stdout-path = &scifa4; + bootargs = "root=/dev/nfs ip=dhcp ignore_loglevel rw"; + stdout-path = "serial0:115200n8"; }; - memory { + memory@40000000 { device_type = "memory"; reg = <0x40000000 0x20000000>; }; - reg_1p8v: regulator@0 { + reg_1p8v: regulator-1p8v { compatible = "regulator-fixed"; regulator-name = "fixed-1.8V"; regulator-min-microvolt = <1800000>; @@ -57,7 +57,7 @@ regulator-boot-on; }; - reg_3p3v: regulator@1 { + reg_3p3v: regulator-3p3v { compatible = "regulator-fixed"; regulator-name = "fixed-3.3V"; regulator-min-microvolt = <3300000>; @@ -66,7 +66,7 @@ regulator-boot-on; }; - vmmc_sdhi0: regulator@2 { + vmmc_sdhi0: regulator-vmmc-sdhi0 { compatible = "regulator-fixed"; regulator-name = "SDHI0 Vcc"; regulator-min-microvolt = <3300000>; @@ -75,7 +75,7 @@ enable-active-high; }; - vmmc_sdhi2: regulator@3 { + vmmc_sdhi2: regulator-vmmc-sdhi2 { compatible = "regulator-fixed"; regulator-name = "SDHI2 Vcc"; regulator-min-microvolt = <3300000>; @@ -352,7 +352,7 @@ }; }; - scifa4_pins: serial4 { + scifa4_pins: scifa4 { groups = "scifa4_data", "scifa4_ctrl"; function = "scifa4"; }; @@ -378,6 +378,7 @@ pinctrl-0 = <&scifa4_pins>; pinctrl-names = "default"; + uart-has-rtscts; status = "okay"; }; diff --git a/arch/arm/boot/dts/sh73a0.dtsi b/arch/arm/boot/dts/sh73a0.dtsi index c4f434cde..032fe2f14 100644 --- a/arch/arm/boot/dts/sh73a0.dtsi +++ b/arch/arm/boot/dts/sh73a0.dtsi @@ -55,7 +55,7 @@ <0xf0000100 0x100>; }; - L2: cache-controller { + L2: cache-controller@f0100000 { compatible = "arm,pl310-cache"; reg = <0xf0100000 0x1000>; interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>; diff --git a/arch/arm/boot/dts/socfpga_arria10.dtsi b/arch/arm/boot/dts/socfpga_arria10.dtsi index 17e81dc92..94000cbe5 100644 --- a/arch/arm/boot/dts/socfpga_arria10.dtsi +++ b/arch/arm/boot/dts/socfpga_arria10.dtsi @@ -22,11 +22,6 @@ #address-cells = <1>; #size-cells = <1>; - aliases { - serial0 = &uart0; - serial1 = &uart1; - }; - cpus { #address-cells = <1>; #size-cells = <0>; @@ -572,12 +567,6 @@ reg = <0xffcfb100 0x80>; }; - sdramedac { - compatible = "altr,sdram-edac-a10"; - altr,sdr-syscon = <&sdr>; - interrupts = <0 2 4>, <0 0 4>; - }; - L2: l2-cache@fffff000 { compatible = "arm,pl310-cache"; reg = <0xfffff000 0x1000>; @@ -610,16 +599,45 @@ #size-cells = <1>; interrupts = <0 2 IRQ_TYPE_LEVEL_HIGH>, <0 0 IRQ_TYPE_LEVEL_HIGH>; + interrupt-controller; + #interrupt-cells = <2>; ranges; + sdramedac { + compatible = "altr,sdram-edac-a10"; + altr,sdr-syscon = <&sdr>; + interrupts = <17 IRQ_TYPE_LEVEL_HIGH>, + <49 IRQ_TYPE_LEVEL_HIGH>; + }; + l2-ecc@ffd06010 { compatible = "altr,socfpga-a10-l2-ecc"; reg = <0xffd06010 0x4>; + interrupts = <0 IRQ_TYPE_LEVEL_HIGH>, + <32 IRQ_TYPE_LEVEL_HIGH>; }; ocram-ecc@ff8c3000 { compatible = "altr,socfpga-a10-ocram-ecc"; reg = <0xff8c3000 0x400>; + interrupts = <1 IRQ_TYPE_LEVEL_HIGH>, + <33 IRQ_TYPE_LEVEL_HIGH>; + }; + + emac0-rx-ecc@ff8c0800 { + compatible = "altr,socfpga-eth-mac-ecc"; + reg = <0xff8c0800 0x400>; + altr,ecc-parent = <&gmac0>; + interrupts = <4 IRQ_TYPE_LEVEL_HIGH>, + <36 IRQ_TYPE_LEVEL_HIGH>; + }; + + emac0-tx-ecc@ff8c0c00 { + compatible = "altr,socfpga-eth-mac-ecc"; + reg = <0xff8c0c00 0x400>; + altr,ecc-parent = <&gmac0>; + interrupts = <5 IRQ_TYPE_LEVEL_HIGH>, + <37 IRQ_TYPE_LEVEL_HIGH>; }; }; diff --git a/arch/arm/boot/dts/socfpga_arria10_socdk.dtsi b/arch/arm/boot/dts/socfpga_arria10_socdk.dtsi index 567df98f1..8e3a4adc3 100644 --- a/arch/arm/boot/dts/socfpga_arria10_socdk.dtsi +++ b/arch/arm/boot/dts/socfpga_arria10_socdk.dtsi @@ -20,9 +20,14 @@ model = "Altera SOCFPGA Arria 10"; compatible = "altr,socfpga-arria10", "altr,socfpga"; + aliases { + ethernet0 = &gmac0; + serial0 = &uart1; + }; + chosen { bootargs = "earlyprintk"; - stdout-path = "serial1:115200n8"; + stdout-path = "serial0:115200n8"; }; memory { diff --git a/arch/arm/boot/dts/socfpga_cyclone5_socrates.dts b/arch/arm/boot/dts/socfpga_cyclone5_socrates.dts index e1a61f208..d79853775 100644 --- a/arch/arm/boot/dts/socfpga_cyclone5_socrates.dts +++ b/arch/arm/boot/dts/socfpga_cyclone5_socrates.dts @@ -52,7 +52,7 @@ status = "okay"; rtc: rtc@68 { - compatible = "stm,m41t82"; + compatible = "st,m41t82"; reg = <0x68>; }; }; diff --git a/arch/arm/boot/dts/ste-dbx5x0.dtsi b/arch/arm/boot/dts/ste-dbx5x0.dtsi index 6ae56838b..d309314f3 100644 --- a/arch/arm/boot/dts/ste-dbx5x0.dtsi +++ b/arch/arm/boot/dts/ste-dbx5x0.dtsi @@ -604,6 +604,7 @@ #interrupt-cells = <2>; ab8500_gpio: ab8500-gpio { + compatible = "stericsson,ab8500-gpio"; gpio-controller; #gpio-cells = <2>; }; diff --git a/arch/arm/boot/dts/ste-href-tvk1281618.dtsi b/arch/arm/boot/dts/ste-href-tvk1281618.dtsi index fc5e8ce70..3c9f2f068 100644 --- a/arch/arm/boot/dts/ste-href-tvk1281618.dtsi +++ b/arch/arm/boot/dts/ste-href-tvk1281618.dtsi @@ -99,46 +99,69 @@ vddio-supply = <&db8500_vsmps2_reg>; pinctrl-names = "default"; pinctrl-0 = <&accel_tvk_mode>; - interrupt-parent = <&gpio2>; - interrupts = <18 IRQ_TYPE_EDGE_FALLING>, - <19 IRQ_TYPE_EDGE_FALLING>; - }; - lsm303dlh@1e { /* - * This magnetometer is packaged with - * the accelerometer, and has a DRDY line, - * however it is not connected on this - * board so it can not generate interrupts. + * These interrupts cannot be used: the other component + * ST-Micro L3D4200D gyro that is connected to the same lines + * cannot set its DRDY line to open drain, so it cannot be + * shared with other peripherals. The should be defined for + * the falling edge if they could be wired together. + * + * interrupts-extended = + * <&gpio1 0 IRQ_TYPE_EDGE_FALLING>, + * <&gpio2 19 IRQ_TYPE_EDGE_FALLING>; */ + }; + lsm303dlh@1e { + /* Magnetometer */ compatible = "st,lsm303dlh-magn"; reg = <0x1e>; vdd-supply = <&ab8500_ldo_aux1_reg>; vddio-supply = <&db8500_vsmps2_reg>; + /* + * These interrupts cannot be used: the other component + * ST-Micro L3D4200D gyro that is connected to the same lines + * cannot set its DRDY line to open drain, so it cannot be + * shared with other peripherals. The should be defined for + * the falling edge if they could be wired together. + * + * interrupts-extended = + * <&gpio1 0 IRQ_TYPE_EDGE_FALLING>, + * <&gpio2 19 IRQ_TYPE_EDGE_FALLING>; + */ }; lis331dl@1c { /* Accelerometer */ compatible = "st,lis331dl-accel"; st,drdy-int-pin = <1>; - drive-open-drain; reg = <0x1c>; vdd-supply = <&ab8500_ldo_aux1_reg>; vddio-supply = <&db8500_vsmps2_reg>; pinctrl-names = "default"; pinctrl-0 = <&accel_tvk_mode>; interrupt-parent = <&gpio2>; - interrupts = <18 IRQ_TYPE_EDGE_FALLING>, - <19 IRQ_TYPE_EDGE_FALLING>; + /* INT2 would need to be open drain */ + interrupts = <18 IRQ_TYPE_EDGE_RISING>, + <19 IRQ_TYPE_EDGE_RISING>; }; ak8974@0f { /* Magnetometer */ compatible = "asahi-kasei,ak8974"; reg = <0x0f>; - vdd-supply = <&ab8500_ldo_aux1_reg>; - vddio-supply = <&db8500_vsmps2_reg>; + avdd-supply = <&ab8500_ldo_aux1_reg>; + dvdd-supply = <&db8500_vsmps2_reg>; pinctrl-names = "default"; pinctrl-0 = <&gyro_magn_tvk_mode>; - interrupt-parent = <&gpio1>; - interrupts = <0 IRQ_TYPE_EDGE_RISING>; + /* + * These interrupts cannot be used: the other component + * ST-Micro L3D4200D gyro that is connected to the same lines + * cannot set its DRDY line to open drain, so it cannot be + * shared with other peripherals. The should be defined for + * the falling edge if they could be wired together. + * + * interrupts-extended = + * <&gpio1 0 IRQ_TYPE_EDGE_FALLING>, + * <&gpio0 31 IRQ_TYPE_EDGE_FALLING>; + */ }; l3g4200d@68 { /* Gyroscope */ @@ -149,8 +172,9 @@ vddio-supply = <&db8500_vsmps2_reg>; pinctrl-names = "default"; pinctrl-0 = <&gyro_magn_tvk_mode>; - interrupt-parent = <&gpio1>; - interrupts = <0 IRQ_TYPE_EDGE_RISING>; + interrupts-extended = + <&gpio1 0 IRQ_TYPE_EDGE_RISING>, + <&gpio0 31 IRQ_TYPE_EDGE_RISING>; }; lsp001wm@5c { /* Barometer/pressure sensor */ @@ -218,7 +242,7 @@ /* Accelerometer interrupt lines 1 & 2 */ tvk_cfg { pins = "GPIO82_C1", "GPIO83_D3"; - ste,config = <&gpio_in_pu>; + ste,config = <&gpio_in_pd>; }; }; }; diff --git a/arch/arm/boot/dts/ste-href.dtsi b/arch/arm/boot/dts/ste-href.dtsi index 6d8ce1543..48dc38482 100644 --- a/arch/arm/boot/dts/ste-href.dtsi +++ b/arch/arm/boot/dts/ste-href.dtsi @@ -223,7 +223,6 @@ prcmu@80157000 { ab8500 { ab8500-gpio { - compatible = "stericsson,ab8500-gpio"; }; ab8500-regulators { diff --git a/arch/arm/boot/dts/ste-hrefv60plus.dtsi b/arch/arm/boot/dts/ste-hrefv60plus.dtsi index 45d7af326..718767683 100644 --- a/arch/arm/boot/dts/ste-hrefv60plus.dtsi +++ b/arch/arm/boot/dts/ste-hrefv60plus.dtsi @@ -18,6 +18,126 @@ compatible = "st-ericsson,hrefv60+", "st-ericsson,u8500"; soc { + /* Name the GPIO muxed rails on the HREF boards */ + gpio@8012e000 { + /* GPIOs 0 - 31 */ + gpio-line-names = + /* GPIO0,1 used for UART0 BT RX/TX */ + "", "", + "UART_WAKE", + "BT_WAKE", + "", + "SDMMC_1V8_3V_SEL", + "FLASH_LED_SYNC (FLASH_CTRL_0)", + "XENON_READY (FLASH_CTRL_1)", + "", "", "", "", "", "", "", "", + "", "", "", "", + "", + "FLASH_LED_EN (FLASH_CTRL_3)", + "", "", + "", "", "", "", "", + /* Used by UART2 (console) */ + "", "", + "MAGNETOMETER_INT"; + }; + + gpio@8012e080 { + /* GPIOs 32 - 63 */ + gpio-line-names = + "MAGNETOMETER_DRDY", + "", "", "", "", "", "", "", + "", "", "", "", "", "", "", "", + "", "", "", "", "", "", "", "", + "", "", "", "", "", "", "", ""; + }; + + gpio@8000e000 { + /* GPIOs 64 - 95 */ + gpio-line-names = "XENON_EN2 (FLASH_CTRL_4)", + "DISP1_RST", + "DISP2_RST", + "TOUCH_INT2", + "LCD_VSI0_A", + "LCD_VSI1_A", + /* GPIO 70-77 used for ETM */ + "", "", "", "", "", "", "", "", + /* GPIO 78-81 used for YCBCR */ + "", "", "", "", + "ACCELEROMETER_INT1_RDY", + "ACCELEROMETER_INT2", + "TOUCH_INT", + "WLAN_ENA", + "", "", "", "", "", + "FORCE_SENSING_INT", + "FORCE_SENSING_RESET", + "", "", + "SDMMC_CD"; + }; + + gpio@8000e080 { + /* GPIOs 96 - 127 */ + gpio-line-names = "", + "FORCE_SENSING_WU", + "", "", "", "", "", "", + "", "", "", "", "", "", "", "", + "", "", "", "", "", "", "", "", + "", "", "", "", "", "", "", ""; + }; + + gpio@8000e100 { + /* GPIOs 128 - 159 */ + gpio-line-names = "", "", "", "", "", "", "", "", + "", "", "", + "DIPRO_INT", /* GPIO139 */ + "XSHUTDOWN_SECONDARY_SENSOR", + "XSHUTDOWN_PRIMARY_SENSOR", + "NFC_RST (NFC_CTRL_", + "TOUCH_RST", + "NFC_IRQ (NFC_CTRL_1)", + "HAL_SW", + "TOUCH_RST2", + "", "", + "VAUDIO_HF_EN", /* GPIO149 */ + "", "", "", "", "", "", "", "", "", ""; + }; + + gpio@8000e180 { + /* GPIOs 160 - 191 */ + gpio-line-names = "", "", "", "", "", "", "", "", + "", + "SDMMC_EN", + "XENON_CHARGE (FLASH_CONTROL_5)", + "GBF_ENA_RESET", + "", "", "", "", + "", "", "", "", "", "", "", "", + "", "", "", "", "", "", "", ""; + }; + + gpio@8011e000 { + /* GPIOs 192 - 223 */ + gpio-line-names = "HDTV_INTN", + "", "", "", + "HDTV_RSTN", + "", "", "", + "", /* GPIO200 */ + "", "", "", "", "", "", "", + /* GPIO208-216 used for WGBF_MC1 */ + "", "", "", "", "", "", "", "", "", + "SW_FRONT_PROXIMITY", /* GPIO217 */ + "KPD_CTRL_INT", /* Keypad controller */ + "", "", "", "", ""; + }; + + gpio@8011e080 { + /* GPIOs 224 - 255 */ + gpio-line-names = "", "", + "HSIT_ACWAKE0", + "", "", "", "", "", + "", "", "", "", "", "", "", "", + "", "", "", "", "", "", "", "", + "", "", "", "", "", "", "", ""; + }; + // External Micro SD slot sdi0_per1@80126000 { cd-gpios = <&gpio2 31 GPIO_ACTIVE_HIGH>; // 95 diff --git a/arch/arm/boot/dts/ste-snowball.dts b/arch/arm/boot/dts/ste-snowball.dts index 36e84efc4..b3df1c60d 100644 --- a/arch/arm/boot/dts/ste-snowball.dts +++ b/arch/arm/boot/dts/ste-snowball.dts @@ -95,6 +95,70 @@ }; soc { + /* Name the GPIO muxed rails on the Snowball board */ + gpio@8012e000 { + /* GPIOs 0 - 31 */ + gpio-line-names = "", "", "", "", "", "", "", "", + "", "", "", "", "", "", "", "", + "", "", "", "", "", "", "", "", + "", "", "", "", "", "", "", + "AP_GPIO31"; + }; + + gpio@8012e080 { + /* GPIOs 32 - 63 */ + gpio-line-names = "USR PB", "", "", "", "", "", "", "", + "", "", "", "", "", "", "", "", + "", "", "", "", "", "", "", "", + "", "", "", "", "", "", "", ""; + }; + + gpio@8000e000 { + /* GPIOs 64 - 95 */ + gpio-line-names = "", "", "", "", "AP_GPIO68", "", "", "", + "", "", "", "", "", "", "", "", + "", "", "", "", "", "", "", "", + "", "", "", "", "", "", "", ""; + }; + + gpio@8000e100 { + /* GPIOs 128 - 159 */ + gpio-line-names = "", "", "", "", "", "", "", "", + "", "", "", "", "IRQ_LAN", "RSTn_LAN", + "USR_LED", "", "", "", "", "", "", + "", "", "AP_GPIO151", "AP_GPIO152", + "", "", "", "", "", "", ""; + }; + + gpio@8000e180 { + /* GPIOs 160 - 191 */ + gpio-line-names = "", "AP_GPIO161", "AP_GPIO162", + "ACCELEROMETER_INT1_RDY", + "ACCELEROMETER_INT2", "MAG_DRDY", + "GYRO_DRDY", "RSTn_MLC", "RSTn_SLC", + "GYRO_INT", "UART_WAKE", "GBF_RESET", + "", "", "", "", + "", "", "", "", "", "", "", "", + "", "", "", "", "", "", "", ""; + }; + + gpio@8011e000 { + /* GPIOs 192 - 223 */ + gpio-line-names = "HDTV_INTn", "", "", "", "HDTV_RST", + "", "", "", "", "", "", "", "", "", + "", "", "", "", "", "", "", "", "", + "WLAN_RESETN", "WLAN_IRQ", "MMC_EN", + "MMC_CD", "", "", "", "", ""; + }; + + gpio@8011e080 { + /* GPIOs 224 - 255 */ + gpio-line-names = "", "", "", "", "SD_SEL", "", "", "", + "", "", "", "", "", "", "", "", + "", "", "", "", "", "", "", "", + "", "", "", "", "", "", "", ""; + }; + usb_per5@a03e0000 { pinctrl-names = "default", "sleep"; pinctrl-0 = <&musb_default_mode>; @@ -352,7 +416,25 @@ ab8500 { ab8500-gpio { - compatible = "stericsson,ab8500-gpio"; + /* + * AB8500 GPIOs are numbered starting from 1, so the first + * index 0 is what in the datasheet is called "GPIO1", and + * the second is "GPIO2" and so forth. Confusingly, the + * Snowball schematic then names the "GPIO2" line "PM_GPIO1". + * while later naming "GPIO4" as "PM_GPIO4". + */ + gpio-line-names = "", /* AB8500 GPIO1 */ + "PM_GPIO1", /* AB8500 GPIO2 */ + "WLAN_CLK_REQ", /* AB8500 GPIO3 */ + "PM_GPIO4", /* AB8500 GPIO4 */ + "", "", "", "", "", "", "", "", "", "", "", + "EN_3V6", /* AB8500 GPIO16 */ + "", "", "", "" ,"", "", "", "", "", + "EN_3V3", /* AB8500 GPIO26 */ + "", "", "", "", "", "", "", "", "", "", "", "", "", + "PM_GPIO40", /* AB8500 GPIO40 */ + "PM_GPIO41", /* AB8500 GPIO41 */ + "PM_GPIO42"; /* AB8500 GPIO42 */ }; ext_regulators: ab8500-ext-regulators { diff --git a/arch/arm/boot/dts/stih410-clock.dtsi b/arch/arm/boot/dts/stih410-clock.dtsi index d1f2acafc..fd5049682 100644 --- a/arch/arm/boot/dts/stih410-clock.dtsi +++ b/arch/arm/boot/dts/stih410-clock.dtsi @@ -103,6 +103,7 @@ clocks = <&clk_sysin>; clock-output-names = "clk-s-a0-pll-ofd-0"; + clock-critical = <0>; /* clk-s-a0-pll-ofd-0 */ }; clk_s_a0_flexgen: clk-s-a0-flexgen { @@ -115,6 +116,7 @@ clock-output-names = "clk-ic-lmi0", "clk-ic-lmi1"; + clock-critical = <CLK_IC_LMI0>; }; }; @@ -129,6 +131,7 @@ "clk-s-c0-fs0-ch1", "clk-s-c0-fs0-ch2", "clk-s-c0-fs0-ch3"; + clock-critical = <0>; /* clk-s-c0-fs0-ch0 */ }; clk_s_c0: clockgen-c@09103000 { @@ -142,6 +145,7 @@ clocks = <&clk_sysin>; clock-output-names = "clk-s-c0-pll0-odf-0"; + clock-critical = <0>; /* clk-s-c0-pll0-odf-0 */ }; clk_s_c0_pll1: clk-s-c0-pll1 { @@ -204,6 +208,11 @@ "clk-clust-hades", "clk-hwpe-hades", "clk-fc-hades"; + clock-critical = <CLK_ICN_CPU>, + <CLK_TX_ICN_DMU>, + <CLK_EXT2F_A9>, + <CLK_ICN_LMI>, + <CLK_ICN_SBC>; }; }; diff --git a/arch/arm/boot/dts/sun4i-a10-a1000.dts b/arch/arm/boot/dts/sun4i-a10-a1000.dts index fa70b8fbf..39e368ec3 100644 --- a/arch/arm/boot/dts/sun4i-a10-a1000.dts +++ b/arch/arm/boot/dts/sun4i-a10-a1000.dts @@ -72,8 +72,9 @@ }; blue { - label = "a1000:blue:usr"; + label = "a1000:blue:pwr"; gpios = <&pio 7 20 GPIO_ACTIVE_HIGH>; + default-state = "on"; }; }; diff --git a/arch/arm/boot/dts/sun4i-a10.dtsi b/arch/arm/boot/dts/sun4i-a10.dtsi index ca58eb279..7e7dfc2b4 100644 --- a/arch/arm/boot/dts/sun4i-a10.dtsi +++ b/arch/arm/boot/dts/sun4i-a10.dtsi @@ -65,9 +65,9 @@ compatible = "allwinner,simple-framebuffer", "simple-framebuffer"; allwinner,pipeline = "de_be0-lcd0-hdmi"; - clocks = <&pll3>, <&pll5 1>, <&ahb_gates 36>, - <&ahb_gates 43>, <&ahb_gates 44>, - <&dram_gates 26>; + clocks = <&ahb_gates 36>, <&ahb_gates 43>, + <&ahb_gates 44>, <&de_be0_clk>, + <&tcon0_ch1_clk>, <&dram_gates 26>; status = "disabled"; }; @@ -75,9 +75,9 @@ compatible = "allwinner,simple-framebuffer", "simple-framebuffer"; allwinner,pipeline = "de_fe0-de_be0-lcd0-hdmi"; - clocks = <&pll3>, <&pll5 1>, <&ahb_gates 36>, - <&ahb_gates 43>, <&ahb_gates 44>, - <&ahb_gates 46>, + clocks = <&ahb_gates 36>, <&ahb_gates 43>, + <&ahb_gates 44>, <&ahb_gates 46>, + <&de_be0_clk>, <&de_fe0_clk>, <&tcon0_ch1_clk>, <&dram_gates 25>, <&dram_gates 26>; status = "disabled"; }; @@ -86,8 +86,8 @@ compatible = "allwinner,simple-framebuffer", "simple-framebuffer"; allwinner,pipeline = "de_fe0-de_be0-lcd0"; - clocks = <&pll3>, <&pll5 1>, <&ahb_gates 36>, - <&ahb_gates 44>, <&ahb_gates 46>, + clocks = <&ahb_gates 36>, <&ahb_gates 44>, <&ahb_gates 46>, + <&de_be0_clk>, <&de_fe0_clk>, <&tcon0_ch0_clk>, <&dram_gates 25>, <&dram_gates 26>; status = "disabled"; }; @@ -96,10 +96,11 @@ compatible = "allwinner,simple-framebuffer", "simple-framebuffer"; allwinner,pipeline = "de_fe0-de_be0-lcd0-tve0"; - clocks = <&pll3>, <&pll5 1>, <&ahb_gates 34>, - <&ahb_gates 36>, <&ahb_gates 44>, - <&ahb_gates 46>, - <&dram_gates 5>, <&dram_gates 25>, <&dram_gates 26>; + clocks = <&ahb_gates 34>, <&ahb_gates 36>, + <&ahb_gates 44>, <&ahb_gates 46>, + <&de_be0_clk>, <&de_fe0_clk>, + <&tcon0_ch1_clk>, <&dram_gates 5>, + <&dram_gates 25>, <&dram_gates 26>; status = "disabled"; }; }; @@ -577,6 +578,81 @@ "dram_de_mp", "dram_ace"; }; + de_be0_clk: clk@01c20104 { + #clock-cells = <0>; + #reset-cells = <0>; + compatible = "allwinner,sun4i-a10-display-clk"; + reg = <0x01c20104 0x4>; + clocks = <&pll3>, <&pll7>, <&pll5 1>; + clock-output-names = "de-be0"; + }; + + de_be1_clk: clk@01c20108 { + #clock-cells = <0>; + #reset-cells = <0>; + compatible = "allwinner,sun4i-a10-display-clk"; + reg = <0x01c20108 0x4>; + clocks = <&pll3>, <&pll7>, <&pll5 1>; + clock-output-names = "de-be1"; + }; + + de_fe0_clk: clk@01c2010c { + #clock-cells = <0>; + #reset-cells = <0>; + compatible = "allwinner,sun4i-a10-display-clk"; + reg = <0x01c2010c 0x4>; + clocks = <&pll3>, <&pll7>, <&pll5 1>; + clock-output-names = "de-fe0"; + }; + + de_fe1_clk: clk@01c20110 { + #clock-cells = <0>; + #reset-cells = <0>; + compatible = "allwinner,sun4i-a10-display-clk"; + reg = <0x01c20110 0x4>; + clocks = <&pll3>, <&pll7>, <&pll5 1>; + clock-output-names = "de-fe1"; + }; + + + tcon0_ch0_clk: clk@01c20118 { + #clock-cells = <0>; + #reset-cells = <1>; + compatible = "allwinner,sun4i-a10-tcon-ch0-clk"; + reg = <0x01c20118 0x4>; + clocks = <&pll3>, <&pll7>, <&pll3x2>, <&pll7x2>; + clock-output-names = "tcon0-ch0-sclk"; + + }; + + tcon1_ch0_clk: clk@01c2011c { + #clock-cells = <0>; + #reset-cells = <1>; + compatible = "allwinner,sun4i-a10-tcon-ch1-clk"; + reg = <0x01c2011c 0x4>; + clocks = <&pll3>, <&pll7>, <&pll3x2>, <&pll7x2>; + clock-output-names = "tcon1-ch0-sclk"; + + }; + + tcon0_ch1_clk: clk@01c2012c { + #clock-cells = <0>; + compatible = "allwinner,sun4i-a10-tcon-ch0-clk"; + reg = <0x01c2012c 0x4>; + clocks = <&pll3>, <&pll7>, <&pll3x2>, <&pll7x2>; + clock-output-names = "tcon0-ch1-sclk"; + + }; + + tcon1_ch1_clk: clk@01c20130 { + #clock-cells = <0>; + compatible = "allwinner,sun4i-a10-tcon-ch1-clk"; + reg = <0x01c20130 0x4>; + clocks = <&pll3>, <&pll7>, <&pll3x2>, <&pll7x2>; + clock-output-names = "tcon1-ch1-sclk"; + + }; + ve_clk: clk@01c2013c { #clock-cells = <0>; #reset-cells = <0>; @@ -645,6 +721,19 @@ #dma-cells = <2>; }; + nfc: nand@01c03000 { + compatible = "allwinner,sun4i-a10-nand"; + reg = <0x01c03000 0x1000>; + interrupts = <37>; + clocks = <&ahb_gates 13>, <&nand_clk>; + clock-names = "ahb", "mod"; + dmas = <&dma SUN4I_DMA_DEDICATED 3>; + dma-names = "rxtx"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; + }; + spi0: spi@01c05000 { compatible = "allwinner,sun4i-a10-spi"; reg = <0x01c05000 0x1000>; @@ -884,69 +973,62 @@ #interrupt-cells = <3>; #gpio-cells = <3>; - pwm0_pins_a: pwm0@0 { - allwinner,pins = "PB2"; - allwinner,function = "pwm"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; - }; - - pwm1_pins_a: pwm1@0 { - allwinner,pins = "PI3"; - allwinner,function = "pwm"; + emac_pins_a: emac0@0 { + allwinner,pins = "PA0", "PA1", "PA2", + "PA3", "PA4", "PA5", "PA6", + "PA7", "PA8", "PA9", "PA10", + "PA11", "PA12", "PA13", "PA14", + "PA15", "PA16"; + allwinner,function = "emac"; allwinner,drive = <SUN4I_PINCTRL_10_MA>; allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; - uart0_pins_a: uart0@0 { - allwinner,pins = "PB22", "PB23"; - allwinner,function = "uart0"; + i2c0_pins_a: i2c0@0 { + allwinner,pins = "PB0", "PB1"; + allwinner,function = "i2c0"; allwinner,drive = <SUN4I_PINCTRL_10_MA>; allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; - uart0_pins_b: uart0@1 { - allwinner,pins = "PF2", "PF4"; - allwinner,function = "uart0"; + i2c1_pins_a: i2c1@0 { + allwinner,pins = "PB18", "PB19"; + allwinner,function = "i2c1"; allwinner,drive = <SUN4I_PINCTRL_10_MA>; allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; - uart1_pins_a: uart1@0 { - allwinner,pins = "PA10", "PA11"; - allwinner,function = "uart1"; + i2c2_pins_a: i2c2@0 { + allwinner,pins = "PB20", "PB21"; + allwinner,function = "i2c2"; allwinner,drive = <SUN4I_PINCTRL_10_MA>; allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; - i2c0_pins_a: i2c0@0 { - allwinner,pins = "PB0", "PB1"; - allwinner,function = "i2c0"; + ir0_rx_pins_a: ir0@0 { + allwinner,pins = "PB4"; + allwinner,function = "ir0"; allwinner,drive = <SUN4I_PINCTRL_10_MA>; allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; - i2c1_pins_a: i2c1@0 { - allwinner,pins = "PB18", "PB19"; - allwinner,function = "i2c1"; + ir0_tx_pins_a: ir0@1 { + allwinner,pins = "PB3"; + allwinner,function = "ir0"; allwinner,drive = <SUN4I_PINCTRL_10_MA>; allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; - i2c2_pins_a: i2c2@0 { - allwinner,pins = "PB20", "PB21"; - allwinner,function = "i2c2"; + ir1_rx_pins_a: ir1@0 { + allwinner,pins = "PB23"; + allwinner,function = "ir1"; allwinner,drive = <SUN4I_PINCTRL_10_MA>; allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; - emac_pins_a: emac0@0 { - allwinner,pins = "PA0", "PA1", "PA2", - "PA3", "PA4", "PA5", "PA6", - "PA7", "PA8", "PA9", "PA10", - "PA11", "PA12", "PA13", "PA14", - "PA15", "PA16"; - allwinner,function = "emac"; + ir1_tx_pins_a: ir1@1 { + allwinner,pins = "PB22"; + allwinner,function = "ir1"; allwinner,drive = <SUN4I_PINCTRL_10_MA>; allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; @@ -966,34 +1048,41 @@ allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; }; - ir0_rx_pins_a: ir0@0 { - allwinner,pins = "PB4"; - allwinner,function = "ir0"; + ps20_pins_a: ps20@0 { + allwinner,pins = "PI20", "PI21"; + allwinner,function = "ps2"; allwinner,drive = <SUN4I_PINCTRL_10_MA>; allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; - ir0_tx_pins_a: ir0@1 { - allwinner,pins = "PB3"; - allwinner,function = "ir0"; + ps21_pins_a: ps21@0 { + allwinner,pins = "PH12", "PH13"; + allwinner,function = "ps2"; allwinner,drive = <SUN4I_PINCTRL_10_MA>; allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; - ir1_rx_pins_a: ir1@0 { - allwinner,pins = "PB23"; - allwinner,function = "ir1"; + pwm0_pins_a: pwm0@0 { + allwinner,pins = "PB2"; + allwinner,function = "pwm"; allwinner,drive = <SUN4I_PINCTRL_10_MA>; allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; - ir1_tx_pins_a: ir1@1 { - allwinner,pins = "PB22"; - allwinner,function = "ir1"; + pwm1_pins_a: pwm1@0 { + allwinner,pins = "PI3"; + allwinner,function = "pwm"; allwinner,drive = <SUN4I_PINCTRL_10_MA>; allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; + spdif_tx_pins_a: spdif@0 { + allwinner,pins = "PB13"; + allwinner,function = "spdif"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; + }; + spi0_pins_a: spi0@0 { allwinner,pins = "PI11", "PI12", "PI13"; allwinner,function = "spi0"; @@ -1050,25 +1139,25 @@ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; - ps20_pins_a: ps20@0 { - allwinner,pins = "PI20", "PI21"; - allwinner,function = "ps2"; + uart0_pins_a: uart0@0 { + allwinner,pins = "PB22", "PB23"; + allwinner,function = "uart0"; allwinner,drive = <SUN4I_PINCTRL_10_MA>; allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; - ps21_pins_a: ps21@0 { - allwinner,pins = "PH12", "PH13"; - allwinner,function = "ps2"; + uart0_pins_b: uart0@1 { + allwinner,pins = "PF2", "PF4"; + allwinner,function = "uart0"; allwinner,drive = <SUN4I_PINCTRL_10_MA>; allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; - spdif_tx_pins_a: spdif@0 { - allwinner,pins = "PB13"; - allwinner,function = "spdif"; + uart1_pins_a: uart1@0 { + allwinner,pins = "PA10", "PA11"; + allwinner,function = "uart1"; allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; }; diff --git a/arch/arm/boot/dts/sun5i-a10s-auxtek-t004.dts b/arch/arm/boot/dts/sun5i-a10s-auxtek-t004.dts index a790ec8ad..2150e15e1 100644 --- a/arch/arm/boot/dts/sun5i-a10s-auxtek-t004.dts +++ b/arch/arm/boot/dts/sun5i-a10s-auxtek-t004.dts @@ -124,7 +124,18 @@ status = "okay"; }; +&otg_sram { + status = "okay"; +}; + &pio { + usb0_id_detect_pin: usb0_id_detect_pin@0 { + allwinner,pins = "PG12"; + allwinner,function = "gpio_in"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; + }; + mmc0_cd_pin_t004: mmc0_cd_pin@0 { allwinner,pins = "PG1"; allwinner,function = "gpio_in"; @@ -158,11 +169,19 @@ status = "okay"; }; +&usb_otg { + dr_mode = "otg"; + status = "okay"; +}; + &usb1_vbus_pin_a { allwinner,pins = "PG13"; }; &usbphy { + pinctrl-names = "default"; + pinctrl-0 = <&usb0_id_detect_pin>; + usb0_id_det-gpio = <&pio 6 12 GPIO_ACTIVE_HIGH>; /* PG12 */ usb1_vbus-supply = <®_usb1_vbus>; status = "okay"; }; diff --git a/arch/arm/boot/dts/sun5i-a10s-mk802.dts b/arch/arm/boot/dts/sun5i-a10s-mk802.dts index 46ff94078..c84ac0053 100644 --- a/arch/arm/boot/dts/sun5i-a10s-mk802.dts +++ b/arch/arm/boot/dts/sun5i-a10s-mk802.dts @@ -73,6 +73,20 @@ status = "okay"; }; +&i2c0 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins_a>; + status = "okay"; + + axp152: pmic@30 { + compatible = "x-powers,axp152"; + reg = <0x30>; + interrupts = <0>; + interrupt-controller; + #interrupt-cells = <1>; + }; +}; + &mmc0 { pinctrl-names = "default"; pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_mk802>; @@ -83,10 +97,23 @@ status = "okay"; }; +&mmc1 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc1_pins_a>; + vmmc-supply = <®_vcc3v3>; + bus-width = <4>; + non-removable; + status = "okay"; +}; + &ohci0 { status = "okay"; }; +&otg_sram { + status = "okay"; +}; + &pio { led_pins_mk802: led_pins@0 { allwinner,pins = "PB2"; @@ -122,6 +149,11 @@ status = "okay"; }; +&usb_otg { + dr_mode = "peripheral"; + status = "okay"; +}; + &usbphy { usb1_vbus-supply = <®_usb1_vbus>; status = "okay"; diff --git a/arch/arm/boot/dts/sun5i-a10s-olinuxino-micro.dts b/arch/arm/boot/dts/sun5i-a10s-olinuxino-micro.dts index 86d046a50..aef91476f 100644 --- a/arch/arm/boot/dts/sun5i-a10s-olinuxino-micro.dts +++ b/arch/arm/boot/dts/sun5i-a10s-olinuxino-micro.dts @@ -248,6 +248,13 @@ status = "okay"; }; +&spi2 { + pinctrl-names = "default"; + pinctrl-0 = <&spi2_pins_a>, + <&spi2_cs0_pins_a>; + status = "okay"; +}; + &uart0 { pinctrl-names = "default"; pinctrl-0 = <&uart0_pins_a>; diff --git a/arch/arm/boot/dts/sun5i-a10s-wobo-i5.dts b/arch/arm/boot/dts/sun5i-a10s-wobo-i5.dts index 39731a78f..b5de75f4c 100644 --- a/arch/arm/boot/dts/sun5i-a10s-wobo-i5.dts +++ b/arch/arm/boot/dts/sun5i-a10s-wobo-i5.dts @@ -196,7 +196,14 @@ regulator-always-on; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; - regulator-name = "vcc-wifi"; + regulator-name = "vcc-wifi1"; +}; + +®_ldo4 { + regulator-always-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc-wifi2"; }; ®_usb1_vbus { diff --git a/arch/arm/boot/dts/sun5i-a10s.dtsi b/arch/arm/boot/dts/sun5i-a10s.dtsi index 367f33012..c41a2ba34 100644 --- a/arch/arm/boot/dts/sun5i-a10s.dtsi +++ b/arch/arm/boot/dts/sun5i-a10s.dtsi @@ -242,6 +242,20 @@ allwinner,drive = <SUN4I_PINCTRL_30_MA>; allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; + + spi2_pins_a: spi2@0 { + allwinner,pins = "PB12", "PB13", "PB14"; + allwinner,function = "spi2"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + }; + + spi2_cs0_pins_a: spi2_cs0@0 { + allwinner,pins = "PB11"; + allwinner,function = "spi2"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + }; }; &sram_a { diff --git a/arch/arm/boot/dts/sun5i-a13-difrnce-dit4350.dts b/arch/arm/boot/dts/sun5i-a13-difrnce-dit4350.dts index 6546fa029..894c4c4f9 100644 --- a/arch/arm/boot/dts/sun5i-a13-difrnce-dit4350.dts +++ b/arch/arm/boot/dts/sun5i-a13-difrnce-dit4350.dts @@ -42,185 +42,9 @@ /dts-v1/; #include "sun5i-a13.dtsi" -#include "sunxi-common-regulators.dtsi" -#include <dt-bindings/gpio/gpio.h> -#include <dt-bindings/input/input.h> -#include <dt-bindings/interrupt-controller/irq.h> -#include <dt-bindings/pinctrl/sun4i-a10.h> -#include <dt-bindings/pwm/pwm.h> +#include "sun5i-reference-design-tablet.dtsi" / { model = "Difrnce DIT4350"; compatible = "difrnce,dit4350", "allwinner,sun5i-a13"; - - aliases { - serial0 = &uart1; - }; - - backlight: backlight { - compatible = "pwm-backlight"; - pwms = <&pwm 0 50000 PWM_POLARITY_INVERTED>; - brightness-levels = <0 10 20 30 40 50 60 70 80 90 100>; - default-brightness-level = <8>; - /* TODO: backlight uses axp gpio1 as enable pin */ - }; - - chosen { - stdout-path = "serial0:115200n8"; - }; -}; - -&cpu0 { - cpu-supply = <®_dcdc2>; -}; - -&ehci0 { - status = "okay"; -}; - -&i2c0 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c0_pins_a>; - status = "okay"; - - axp209: pmic@34 { - reg = <0x34>; - interrupts = <0>; - }; -}; - -#include "axp209.dtsi" - -&i2c1 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c1_pins_a>; - status = "okay"; - - pcf8563: rtc@51 { - compatible = "nxp,pcf8563"; - reg = <0x51>; - }; -}; - -&lradc { - vref-supply = <®_ldo2>; - status = "okay"; - - button@200 { - label = "Volume Up"; - linux,code = <KEY_VOLUMEUP>; - channel = <0>; - voltage = <200000>; - }; - - button@400 { - label = "Volume Down"; - linux,code = <KEY_VOLUMEDOWN>; - channel = <0>; - voltage = <400000>; - }; -}; - -&mmc0 { - pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_d709>; - vmmc-supply = <®_vcc3v3>; - bus-width = <4>; - cd-gpios = <&pio 6 0 GPIO_ACTIVE_HIGH>; /* PG0 */ - cd-inverted; - status = "okay"; -}; - -&otg_sram { - status = "okay"; -}; - -&pio { - mmc0_cd_pin_d709: mmc0_cd_pin@0 { - allwinner,pins = "PG0"; - allwinner,function = "gpio_in"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; - }; - - usb0_vbus_detect_pin: usb0_vbus_detect_pin@0 { - allwinner,pins = "PG1"; - allwinner,function = "gpio_in"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_PULL_DOWN>; - }; - - usb0_id_detect_pin: usb0_id_detect_pin@0 { - allwinner,pins = "PG2"; - allwinner,function = "gpio_in"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; - }; -}; - -&pwm { - pinctrl-names = "default"; - pinctrl-0 = <&pwm0_pins>; - status = "okay"; -}; - -®_dcdc2 { - regulator-always-on; - regulator-min-microvolt = <1000000>; - regulator-max-microvolt = <1400000>; - regulator-name = "vdd-cpu"; -}; - -®_dcdc3 { - regulator-always-on; - regulator-min-microvolt = <1250000>; - regulator-max-microvolt = <1250000>; - regulator-name = "vdd-int-pll"; -}; - -®_ldo1 { - regulator-name = "vdd-rtc"; -}; - -®_ldo2 { - regulator-always-on; - regulator-min-microvolt = <3000000>; - regulator-max-microvolt = <3000000>; - regulator-name = "avcc"; -}; - -®_ldo3 { - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-name = "vcc-wifi"; -}; - -®_usb0_vbus { - gpio = <&pio 6 12 GPIO_ACTIVE_HIGH>; /* PG12 */ - status = "okay"; -}; - -&uart1 { - pinctrl-names = "default"; - pinctrl-0 = <&uart1_pins_b>; - status = "okay"; -}; - -&usb_otg { - dr_mode = "otg"; - status = "okay"; -}; - -&usb0_vbus_pin_a { - allwinner,pins = "PG12"; -}; - -&usbphy { - pinctrl-names = "default"; - pinctrl-0 = <&usb0_id_detect_pin>, <&usb0_vbus_detect_pin>; - usb0_id_det-gpio = <&pio 6 2 GPIO_ACTIVE_HIGH>; /* PG2 */ - usb0_vbus_det-gpio = <&pio 6 1 GPIO_ACTIVE_HIGH>; /* PG1 */ - usb0_vbus-supply = <®_usb0_vbus>; - usb1_vbus-supply = <®_ldo3>; - status = "okay"; }; diff --git a/arch/arm/boot/dts/sun5i-a13-q8-tablet.dts b/arch/arm/boot/dts/sun5i-a13-q8-tablet.dts index 72e93acb5..a89f29fa3 100644 --- a/arch/arm/boot/dts/sun5i-a13-q8-tablet.dts +++ b/arch/arm/boot/dts/sun5i-a13-q8-tablet.dts @@ -42,19 +42,45 @@ /dts-v1/; #include "sun5i-a13.dtsi" -#include "sun5i-q8-common.dtsi" +#include "sun5i-reference-design-tablet.dtsi" / { model = "Q8 A13 Tablet"; compatible = "allwinner,q8-a13", "allwinner,sun5i-a13"; + + panel: panel { + compatible = "urt,umsh-8596md-t", "simple-panel"; + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + /* TODO: lcd panel uses axp gpio0 as enable pin */ + backlight = <&backlight>; + #address-cells = <1>; + #size-cells = <0>; + + panel_input: endpoint@0 { + reg = <0>; + remote-endpoint = <&tcon0_out_lcd>; + }; + }; + }; +}; + +&be0 { + status = "okay"; }; -®_ldo3 { - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-name = "vcc-wifi"; +&tcon0 { + pinctrl-names = "default"; + pinctrl-0 = <&lcd_rgb666_pins>; + status = "okay"; }; -&usbphy { - usb1_vbus-supply = <®_ldo3>; +&tcon0_out { + tcon0_out_lcd: endpoint@0 { + reg = <0>; + remote-endpoint = <&panel_input>; + }; }; diff --git a/arch/arm/boot/dts/sun5i-a13-utoo-p66.dts b/arch/arm/boot/dts/sun5i-a13-utoo-p66.dts index fa9ddfdcf..a8b0bcc04 100644 --- a/arch/arm/boot/dts/sun5i-a13-utoo-p66.dts +++ b/arch/arm/boot/dts/sun5i-a13-utoo-p66.dts @@ -42,24 +42,20 @@ /dts-v1/; #include "sun5i-a13.dtsi" -#include "sunxi-common-regulators.dtsi" -#include <dt-bindings/gpio/gpio.h> -#include <dt-bindings/input/input.h> +#include "sun5i-reference-design-tablet.dtsi" #include <dt-bindings/interrupt-controller/irq.h> -#include <dt-bindings/pinctrl/sun4i-a10.h> -#include <dt-bindings/pwm/pwm.h> / { model = "Utoo P66"; compatible = "utoo,p66", "allwinner,sun5i-a13"; - backlight: backlight { - compatible = "pwm-backlight"; - pwms = <&pwm 0 50000 PWM_POLARITY_INVERTED>; - /* Note levels of 10 / 20% result in backlight off */ - brightness-levels = <0 30 40 50 60 70 80 90 100>; - default-brightness-level = <6>; - /* TODO: backlight uses axp gpio1 as enable pin */ + /* The P66 uses the uart pins as gpios */ + aliases { + /delete-property/serial0; + }; + + chosen { + /delete-property/stdout-path; }; i2c_lcd: i2c@0 { @@ -73,39 +69,21 @@ }; }; -&codec { - pinctrl-names = "default"; - pinctrl-0 = <&codec_pa_pin>; - allwinner,pa-gpios = <&pio 6 3 GPIO_ACTIVE_HIGH>; /* PG3 */ - status = "okay"; -}; - -&cpu0 { - cpu-supply = <®_dcdc2>; +&backlight { + /* Note levels of 10 / 20% result in backlight off */ + brightness-levels = <0 30 40 50 60 70 80 90 100>; + default-brightness-level = <6>; }; -&ehci0 { - status = "okay"; +&codec { + allwinner,pa-gpios = <&pio 6 3 GPIO_ACTIVE_HIGH>; /* PG3 */ }; -&i2c0 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c0_pins_a>; - status = "okay"; - - axp209: pmic@34 { - reg = <0x34>; - interrupts = <0>; - }; +&codec_pa_pin { + allwinner,pins = "PG3"; }; -#include "axp209.dtsi" - &i2c1 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c1_pins_a>; - status = "okay"; - icn8318: touchscreen@40 { compatible = "chipone,icn8318"; reg = <0x40>; @@ -119,40 +97,6 @@ touchscreen-inverted-x; touchscreen-swapped-x-y; }; - - pcf8563: rtc@51 { - compatible = "nxp,pcf8563"; - reg = <0x51>; - }; -}; - -&lradc { - vref-supply = <®_ldo2>; - status = "okay"; - - button@200 { - label = "Volume Up"; - linux,code = <KEY_VOLUMEUP>; - channel = <0>; - voltage = <200000>; - }; - - button@400 { - label = "Volume Down"; - linux,code = <KEY_VOLUMEDOWN>; - channel = <0>; - voltage = <400000>; - }; -}; - -&mmc0 { - pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_p66>; - vmmc-supply = <®_vcc3v3>; - bus-width = <4>; - cd-gpios = <&pio 6 0 GPIO_ACTIVE_HIGH>; /* PG0 */ - cd-inverted; - status = "okay"; }; &mmc2 { @@ -170,39 +114,7 @@ }; }; -&otg_sram { - status = "okay"; -}; - &pio { - codec_pa_pin: codec_pa_pin@0 { - allwinner,pins = "PG3"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; - }; - - mmc0_cd_pin_p66: mmc0_cd_pin@0 { - allwinner,pins = "PG0"; - allwinner,function = "gpio_in"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; - }; - - usb0_vbus_detect_pin: usb0_vbus_detect_pin@0 { - allwinner,pins = "PG1"; - allwinner,function = "gpio_in"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_PULL_DOWN>; - }; - - usb0_id_detect_pin: usb0_id_detect_pin@0 { - allwinner,pins = "PG2"; - allwinner,function = "gpio_in"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; - }; - i2c_lcd_pins: i2c_lcd_pin@0 { allwinner,pins = "PG10", "PG12"; allwinner,function = "gpio_out"; @@ -217,67 +129,17 @@ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; - usb0_vbus_pin_a: usb0_vbus_pin@0 { - allwinner,pins = "PB4"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; - }; -}; - -&pwm { - pinctrl-names = "default"; - pinctrl-0 = <&pwm0_pins>; - status = "okay"; -}; - -®_dcdc2 { - regulator-always-on; - regulator-min-microvolt = <1000000>; - regulator-max-microvolt = <1500000>; - regulator-name = "vdd-cpu"; -}; - -®_dcdc3 { - regulator-always-on; - regulator-min-microvolt = <1000000>; - regulator-max-microvolt = <1400000>; - regulator-name = "vdd-int-pll"; -}; - -®_ldo1 { - regulator-name = "vdd-rtc"; -}; - -®_ldo2 { - regulator-always-on; - regulator-min-microvolt = <3000000>; - regulator-max-microvolt = <3000000>; - regulator-name = "avcc"; -}; - -®_ldo3 { - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-name = "vcc-wifi"; }; ®_usb0_vbus { gpio = <&pio 1 4 GPIO_ACTIVE_HIGH>; /* PB4 */ - status = "okay"; }; -&usb_otg { - dr_mode = "otg"; - status = "okay"; +&uart1 { + /* The P66 uses the uart pins as gpios */ + status = "disabled"; }; -&usbphy { - pinctrl-names = "default"; - pinctrl-0 = <&usb0_id_detect_pin>, <&usb0_vbus_detect_pin>; - usb0_id_det-gpio = <&pio 6 2 GPIO_ACTIVE_HIGH>; /* PG2 */ - usb0_vbus_det-gpio = <&pio 6 1 GPIO_ACTIVE_HIGH>; /* PG1 */ - usb0_vbus-supply = <®_usb0_vbus>; - usb1_vbus-supply = <®_ldo3>; - status = "okay"; +&usb0_vbus_pin_a { + allwinner,pins = "PB4"; }; diff --git a/arch/arm/boot/dts/sun5i-a13.dtsi b/arch/arm/boot/dts/sun5i-a13.dtsi index 263d46dbc..a17ba0243 100644 --- a/arch/arm/boot/dts/sun5i-a13.dtsi +++ b/arch/arm/boot/dts/sun5i-a13.dtsi @@ -84,7 +84,7 @@ trips { cpu_alert0: cpu_alert0 { /* milliCelsius */ - temperature = <850000>; + temperature = <85000>; hysteresis = <2000>; type = "passive"; }; @@ -207,7 +207,50 @@ }; }; + display-engine { + compatible = "allwinner,sun5i-a13-display-engine"; + allwinner,pipelines = <&fe0>; + }; + soc@01c00000 { + tcon0: lcd-controller@01c0c000 { + compatible = "allwinner,sun5i-a13-tcon"; + reg = <0x01c0c000 0x1000>; + interrupts = <44>; + resets = <&tcon_ch0_clk 1>; + reset-names = "lcd"; + clocks = <&ahb_gates 36>, + <&tcon_ch0_clk>, + <&tcon_ch1_clk>; + clock-names = "ahb", + "tcon-ch0", + "tcon-ch1"; + clock-output-names = "tcon-pixel-clock"; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + tcon0_in: port@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + + tcon0_in_be0: endpoint@0 { + reg = <0>; + remote-endpoint = <&be0_out_tcon0>; + }; + }; + + tcon0_out: port@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + }; + }; + }; + pwm: pwm@01c20e00 { compatible = "allwinner,sun5i-a13-pwm"; reg = <0x01c20e00 0xc>; @@ -215,6 +258,75 @@ #pwm-cells = <3>; status = "disabled"; }; + + fe0: display-frontend@01e00000 { + compatible = "allwinner,sun5i-a13-display-frontend"; + reg = <0x01e00000 0x20000>; + interrupts = <47>; + clocks = <&ahb_gates 46>, <&de_fe_clk>, + <&dram_gates 25>; + clock-names = "ahb", "mod", + "ram"; + resets = <&de_fe_clk>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + fe0_out: port@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + + fe0_out_be0: endpoint@0 { + reg = <0>; + remote-endpoint = <&be0_in_fe0>; + }; + }; + }; + }; + + be0: display-backend@01e60000 { + compatible = "allwinner,sun5i-a13-display-backend"; + reg = <0x01e60000 0x10000>; + clocks = <&ahb_gates 44>, <&de_be_clk>, + <&dram_gates 26>; + clock-names = "ahb", "mod", + "ram"; + resets = <&de_be_clk>; + status = "disabled"; + + assigned-clocks = <&de_be_clk>; + assigned-clock-rates = <300000000>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + be0_in: port@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + + be0_in_fe0: endpoint@0 { + reg = <0>; + remote-endpoint = <&fe0_out_be0>; + }; + }; + + be0_out: port@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + + be0_out_tcon0: endpoint@0 { + reg = <0>; + remote-endpoint = <&tcon0_in_be0>; + }; + }; + }; + }; }; }; @@ -237,6 +349,16 @@ &pio { compatible = "allwinner,sun5i-a13-pinctrl"; + lcd_rgb666_pins: lcd_rgb666@0 { + allwinner,pins = "PD2", "PD3", "PD4", "PD5", "PD6", "PD7", + "PD10", "PD11", "PD12", "PD13", "PD14", "PD15", + "PD18", "PD19", "PD20", "PD21", "PD22", "PD23", + "PD24", "PD25", "PD26", "PD27"; + allwinner,function = "lcd0"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + }; + uart1_pins_a: uart1@0 { allwinner,pins = "PE10", "PE11"; allwinner,function = "uart1"; diff --git a/arch/arm/boot/dts/sun5i-r8.dtsi b/arch/arm/boot/dts/sun5i-r8.dtsi index c04cf690b..8b058f53b 100644 --- a/arch/arm/boot/dts/sun5i-r8.dtsi +++ b/arch/arm/boot/dts/sun5i-r8.dtsi @@ -76,122 +76,12 @@ }; }; }; - - tcon0: lcd-controller@01c0c000 { - compatible = "allwinner,sun5i-a13-tcon"; - reg = <0x01c0c000 0x1000>; - interrupts = <44>; - resets = <&tcon_ch0_clk 1>; - reset-names = "lcd"; - clocks = <&ahb_gates 36>, - <&tcon_ch0_clk>, - <&tcon_ch1_clk>; - clock-names = "ahb", - "tcon-ch0", - "tcon-ch1"; - clock-output-names = "tcon-pixel-clock"; - status = "disabled"; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - tcon0_in: port@0 { - #address-cells = <1>; - #size-cells = <0>; - reg = <0>; - - tcon0_in_be0: endpoint@0 { - reg = <0>; - remote-endpoint = <&be0_out_tcon0>; - }; - }; - - tcon0_out: port@1 { - #address-cells = <1>; - #size-cells = <0>; - reg = <1>; - - tcon0_out_tve0: endpoint@1 { - reg = <1>; - remote-endpoint = <&tve0_in_tcon0>; - }; - }; - }; - }; - - fe0: display-frontend@01e00000 { - compatible = "allwinner,sun5i-a13-display-frontend"; - reg = <0x01e00000 0x20000>; - interrupts = <47>; - clocks = <&ahb_gates 46>, <&de_fe_clk>, - <&dram_gates 25>; - clock-names = "ahb", "mod", - "ram"; - resets = <&de_fe_clk>; - status = "disabled"; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - fe0_out: port@1 { - #address-cells = <1>; - #size-cells = <0>; - reg = <1>; - - fe0_out_be0: endpoint@0 { - reg = <0>; - remote-endpoint = <&be0_in_fe0>; - }; - }; - }; - }; - - be0: display-backend@01e60000 { - compatible = "allwinner,sun5i-a13-display-backend"; - reg = <0x01e60000 0x10000>; - clocks = <&ahb_gates 44>, <&de_be_clk>, - <&dram_gates 26>; - clock-names = "ahb", "mod", - "ram"; - resets = <&de_be_clk>; - status = "disabled"; - - assigned-clocks = <&de_be_clk>; - assigned-clock-rates = <300000000>; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - be0_in: port@0 { - #address-cells = <1>; - #size-cells = <0>; - reg = <0>; - - be0_in_fe0: endpoint@0 { - reg = <0>; - remote-endpoint = <&fe0_out_be0>; - }; - }; - - be0_out: port@1 { - #address-cells = <1>; - #size-cells = <0>; - reg = <1>; - - be0_out_tcon0: endpoint@0 { - reg = <0>; - remote-endpoint = <&tcon0_in_be0>; - }; - }; - }; - }; }; +}; - display-engine { - compatible = "allwinner,sun5i-a13-display-engine"; - allwinner,pipelines = <&fe0>; +&tcon0_out { + tcon0_out_tve0: endpoint@1 { + reg = <1>; + remote-endpoint = <&tve0_in_tcon0>; }; }; diff --git a/arch/arm/boot/dts/sun5i-reference-design-tablet.dtsi b/arch/arm/boot/dts/sun5i-reference-design-tablet.dtsi new file mode 100644 index 000000000..20cc940f5 --- /dev/null +++ b/arch/arm/boot/dts/sun5i-reference-design-tablet.dtsi @@ -0,0 +1,210 @@ +/* + * Copyright 2015 Hans de Goede <hdegoede@redhat.com> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ +#include "sunxi-reference-design-tablet.dtsi" + +#include <dt-bindings/pwm/pwm.h> + +/ { + aliases { + serial0 = &uart1; + }; + + backlight: backlight { + compatible = "pwm-backlight"; + pwms = <&pwm 0 50000 PWM_POLARITY_INVERTED>; + brightness-levels = <0 10 20 30 40 50 60 70 80 90 100>; + default-brightness-level = <8>; + /* TODO: backlight uses axp gpio1 as enable pin */ + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; +}; + +&codec { + pinctrl-names = "default"; + pinctrl-0 = <&codec_pa_pin>; + allwinner,pa-gpios = <&pio 6 10 GPIO_ACTIVE_HIGH>; /* PG10 */ + status = "okay"; +}; + +&cpu0 { + cpu-supply = <®_dcdc2>; +}; + +&ehci0 { + status = "okay"; +}; + +&i2c0 { + axp209: pmic@34 { + reg = <0x34>; + interrupts = <0>; + }; +}; + +&i2c1 { + pcf8563: rtc@51 { + compatible = "nxp,pcf8563"; + reg = <0x51>; + }; +}; + +#include "axp209.dtsi" + +&lradc { + vref-supply = <®_ldo2>; +}; + +&mmc0 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin>; + vmmc-supply = <®_vcc3v0>; + bus-width = <4>; + cd-gpios = <&pio 6 0 GPIO_ACTIVE_HIGH>; /* PG0 */ + cd-inverted; + status = "okay"; +}; + +&otg_sram { + status = "okay"; +}; + +&pio { + codec_pa_pin: codec_pa_pin@0 { + allwinner,pins = "PG10"; + allwinner,function = "gpio_out"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + }; + + mmc0_cd_pin: mmc0_cd_pin@0 { + allwinner,pins = "PG0"; + allwinner,function = "gpio_in"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; + }; + + usb0_vbus_detect_pin: usb0_vbus_detect_pin@0 { + allwinner,pins = "PG1"; + allwinner,function = "gpio_in"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_PULL_DOWN>; + }; + + usb0_id_detect_pin: usb0_id_detect_pin@0 { + allwinner,pins = "PG2"; + allwinner,function = "gpio_in"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; + }; + + usb0_vbus_pin_a: usb0_vbus_pin@0 { + allwinner,pins = "PG12"; + allwinner,function = "gpio_out"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + }; +}; + +®_dcdc2 { + regulator-always-on; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1500000>; + regulator-name = "vdd-cpu"; +}; + +®_dcdc3 { + regulator-always-on; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1400000>; + regulator-name = "vdd-int-pll"; +}; + +®_ldo1 { + regulator-name = "vdd-rtc"; +}; + +®_ldo2 { + regulator-always-on; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-name = "avcc"; +}; + +®_ldo3 { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc-wifi"; +}; + +®_usb0_vbus { + gpio = <&pio 6 12 GPIO_ACTIVE_HIGH>; /* PG12 */ + status = "okay"; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&uart1_pins_b>; + status = "okay"; +}; + +&usb_otg { + dr_mode = "otg"; + status = "okay"; +}; + +&usb_power_supply { + status = "okay"; +}; + +&usbphy { + pinctrl-names = "default"; + pinctrl-0 = <&usb0_id_detect_pin>, <&usb0_vbus_detect_pin>; + usb0_id_det-gpio = <&pio 6 2 GPIO_ACTIVE_HIGH>; /* PG2 */ + usb0_vbus_det-gpio = <&pio 6 1 GPIO_ACTIVE_HIGH>; /* PG1 */ + usb0_vbus_power-supply = <&usb_power_supply>; + usb0_vbus-supply = <®_usb0_vbus>; + usb1_vbus-supply = <®_ldo3>; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/sun5i.dtsi b/arch/arm/boot/dts/sun5i.dtsi index 0840612b5..e374f4fc8 100644 --- a/arch/arm/boot/dts/sun5i.dtsi +++ b/arch/arm/boot/dts/sun5i.dtsi @@ -130,7 +130,7 @@ }; pll3x2: pll3x2_clk { - compatible = "fixed-factor-clock"; + compatible = "allwinner,sun4i-a10-pll3-2x-clk", "fixed-factor-clock"; #clock-cells = <0>; clock-div = <1>; clock-mult = <2>; diff --git a/arch/arm/boot/dts/sun6i-a31-m9.dts b/arch/arm/boot/dts/sun6i-a31-m9.dts index 6e0e5687a..29016a13a 100644 --- a/arch/arm/boot/dts/sun6i-a31-m9.dts +++ b/arch/arm/boot/dts/sun6i-a31-m9.dts @@ -65,12 +65,17 @@ pinctrl-0 = <&led_pins_m9>; blue { - label = "m9:blue:usr"; + label = "m9:blue:pwr"; gpios = <&pio 7 13 GPIO_ACTIVE_HIGH>; + default-state = "on"; }; }; }; +&cpu0 { + cpu-supply = <®_dcdc3>; +}; + &ehci0 { status = "okay"; }; @@ -84,6 +89,7 @@ pinctrl-0 = <&gmac_pins_mii_a>; phy = <&phy1>; phy-mode = "mii"; + phy-supply = <®_dldo1>; status = "okay"; phy1: ethernet-phy@1 { @@ -100,13 +106,26 @@ &mmc0 { pinctrl-names = "default"; pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_m9>; - vmmc-supply = <®_vcc3v3>; + vmmc-supply = <®_dcdc1>; bus-width = <4>; cd-gpios = <&pio 7 22 GPIO_ACTIVE_HIGH>; /* PH22 */ cd-inverted; status = "okay"; }; +&p2wi { + status = "okay"; + + axp22x: pmic@68 { + compatible = "x-powers,axp221"; + reg = <0x68>; + interrupt-parent = <&nmi_intc>; + interrupts = <0 IRQ_TYPE_LEVEL_LOW>; + }; +}; + +#include "axp22x.dtsi" + &pio { led_pins_m9: led_pins@0 { allwinner,pins = "PH13"; @@ -130,6 +149,78 @@ }; }; +®_aldo1 { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc-wifi"; +}; + +®_aldo3 { + regulator-always-on; + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <3300000>; + regulator-name = "avcc"; +}; + +®_dc5ldo { + regulator-always-on; + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <1320000>; + regulator-name = "vdd-cpus"; /* This is an educated guess */ +}; + +®_dcdc1 { + regulator-always-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc-3v3"; +}; + +®_dcdc2 { + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <1320000>; + regulator-name = "vdd-gpu"; +}; + +®_dcdc3 { + regulator-always-on; + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <1320000>; + regulator-name = "vdd-cpu"; +}; + +®_dcdc4 { + regulator-always-on; + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <1320000>; + regulator-name = "vdd-sys-dll"; +}; + +®_dcdc5 { + regulator-always-on; + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <1500000>; + regulator-name = "vcc-dram"; +}; + +®_dldo1 { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc-ethernet-phy"; +}; + +/* + * Both reg_usb1_vbus and reg_dldo4 need to be on for the hub attached + * to usb1 to work, and we can list only one usb1_vbus-supply, so dldo4 is + * marked as regulator-always-on. + */ +®_dldo4 { + regulator-always-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc-usb-hub"; +}; + ®_usb1_vbus { pinctrl-names = "default"; pinctrl-0 = <&usb1_vbus_pin_m9>; @@ -145,5 +236,6 @@ &usbphy { usb1_vbus-supply = <®_usb1_vbus>; + usb2_vbus-supply = <®_aldo1>; status = "okay"; }; diff --git a/arch/arm/boot/dts/sun6i-a31-mele-a1000g-quad.dts b/arch/arm/boot/dts/sun6i-a31-mele-a1000g-quad.dts index 4dd70cce2..5faeae429 100644 --- a/arch/arm/boot/dts/sun6i-a31-mele-a1000g-quad.dts +++ b/arch/arm/boot/dts/sun6i-a31-mele-a1000g-quad.dts @@ -65,12 +65,17 @@ pinctrl-0 = <&led_pins_m9>; blue { - label = "m9:blue:usr"; + label = "a1000g:blue:pwr"; gpios = <&pio 7 13 GPIO_ACTIVE_HIGH>; + default-state = "on"; }; }; }; +&cpu0 { + cpu-supply = <®_dcdc3>; +}; + &ehci0 { status = "okay"; }; @@ -84,6 +89,7 @@ pinctrl-0 = <&gmac_pins_mii_a>; phy = <&phy1>; phy-mode = "mii"; + phy-supply = <®_dldo1>; status = "okay"; phy1: ethernet-phy@1 { @@ -100,13 +106,26 @@ &mmc0 { pinctrl-names = "default"; pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_m9>; - vmmc-supply = <®_vcc3v3>; + vmmc-supply = <®_dcdc1>; bus-width = <4>; cd-gpios = <&pio 7 22 GPIO_ACTIVE_HIGH>; /* PH22 */ cd-inverted; status = "okay"; }; +&p2wi { + status = "okay"; + + axp22x: pmic@68 { + compatible = "x-powers,axp221"; + reg = <0x68>; + interrupt-parent = <&nmi_intc>; + interrupts = <0 IRQ_TYPE_LEVEL_LOW>; + }; +}; + +#include "axp22x.dtsi" + &pio { led_pins_m9: led_pins@0 { allwinner,pins = "PH13"; @@ -130,6 +149,78 @@ }; }; +®_aldo1 { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc-wifi"; +}; + +®_aldo3 { + regulator-always-on; + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <3300000>; + regulator-name = "avcc"; +}; + +®_dc5ldo { + regulator-always-on; + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <1320000>; + regulator-name = "vdd-cpus"; /* This is an educated guess */ +}; + +®_dcdc1 { + regulator-always-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc-3v3"; +}; + +®_dcdc2 { + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <1320000>; + regulator-name = "vdd-gpu"; +}; + +®_dcdc3 { + regulator-always-on; + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <1320000>; + regulator-name = "vdd-cpu"; +}; + +®_dcdc4 { + regulator-always-on; + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <1320000>; + regulator-name = "vdd-sys-dll"; +}; + +®_dcdc5 { + regulator-always-on; + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <1500000>; + regulator-name = "vcc-dram"; +}; + +®_dldo1 { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc-ethernet-phy"; +}; + +/* + * Both reg_usb1_vbus and reg_dldo4 need to be on for the hub attached + * to usb1 to work, and we can list only one usb1_vbus-supply, so dldo4 is + * marked as regulator-always-on. + */ +®_dldo4 { + regulator-always-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc-usb-hub"; +}; + ®_usb1_vbus { pinctrl-names = "default"; pinctrl-0 = <&usb1_vbus_pin_m9>; @@ -150,5 +241,6 @@ &usbphy { usb1_vbus-supply = <®_usb1_vbus>; + usb2_vbus-supply = <®_aldo1>; status = "okay"; }; diff --git a/arch/arm/boot/dts/sun7i-a20-bananapi-m1-plus.dts b/arch/arm/boot/dts/sun7i-a20-bananapi-m1-plus.dts new file mode 100644 index 000000000..ba5bca0fe --- /dev/null +++ b/arch/arm/boot/dts/sun7i-a20-bananapi-m1-plus.dts @@ -0,0 +1,229 @@ +/* + * Copyright 2016 Luo Yi <luoyi.ly@gmail.com> + * + * Thanks to the original work by Hans de Goede <hdegoede@redhat.com> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; +#include "sun7i-a20.dtsi" +#include "sunxi-common-regulators.dtsi" +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/interrupt-controller/arm-gic.h> + +/ { + model = "Banana Pi BPI-M1-Plus"; + compatible = "sinovoip,bpi-m1-plus", "allwinner,sun7i-a20"; + + aliases { + serial0 = &uart0; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&led_pins_bpi_m1p>; + + green { + label = "bananapi-m1-plus:green:usr"; + gpios = <&pio 7 24 GPIO_ACTIVE_HIGH>; + }; + + pwr { + label = "bananapi-m1-plus:pwr:usr"; + gpios = <&pio 7 25 GPIO_ACTIVE_HIGH>; + default-state = "on"; + }; + }; + + mmc3_pwrseq: mmc3_pwrseq { + compatible = "mmc-pwrseq-simple"; + pinctrl-names = "default"; + pinctrl-0 = <&mmc3_pwrseq_pin_bpi_m1p>; + reset-gpios = <&pio 7 22 GPIO_ACTIVE_LOW>; /* PH22 WL-PMU-EN */ + }; + + reg_gmac_3v3: gmac-3v3 { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&gmac_power_pin_bpi_m1p>; + regulator-name = "gmac-3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + startup-delay-us = <100000>; + enable-active-high; + gpio = <&pio 7 23 GPIO_ACTIVE_HIGH>; + }; +}; + +&ahci { + status = "okay"; +}; + +&codec { + status = "okay"; +}; + +&ehci0 { + status = "okay"; +}; + +&ehci1 { + status = "okay"; +}; + +&gmac { + pinctrl-names = "default"; + pinctrl-0 = <&gmac_pins_rgmii_a>; + phy = <&phy1>; + phy-mode = "rgmii"; + phy-supply = <®_gmac_3v3>; + status = "okay"; + + phy1: ethernet-phy@1 { + reg = <1>; + }; +}; + +&i2c0 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins_a>; + status = "okay"; + + axp209: pmic@34 { + compatible = "x-powers,axp209"; + reg = <0x34>; + interrupt-parent = <&nmi_intc>; + interrupts = <0 IRQ_TYPE_LEVEL_LOW>; + + interrupt-controller; + #interrupt-cells = <1>; + }; +}; + +&ir0 { + pinctrl-names = "default"; + pinctrl-0 = <&ir0_rx_pins_a>; + status = "okay"; +}; + +&mmc0 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_bpi_m1p>; + vmmc-supply = <®_vcc3v3>; + bus-width = <4>; + cd-gpios = <&pio 7 10 GPIO_ACTIVE_HIGH>; /* PH10 */ + cd-inverted; + status = "okay"; +}; + +&mmc3 { + #address-cells = <1>; + #size-cells = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&mmc3_pins_a>; + vmmc-supply = <®_vcc3v3>; + mmc-pwrseq = <&mmc3_pwrseq>; + bus-width = <4>; + non-removable; + enable-sdio-wakeup; + status = "okay"; + + brcmf: bcrmf@1 { + reg = <1>; + compatible = "brcm,bcm4329-fmac"; + interrupt-parent = <&pio>; + interrupts = <7 15 IRQ_TYPE_LEVEL_LOW>; + interrupt-names = "host-wake"; + }; +}; + +&mmc3_pins_a { + /* AP6210 requires pull-up */ + allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; +}; + +&ohci0 { + status = "okay"; +}; + +&ohci1 { + status = "okay"; +}; + +&pio { + gmac_power_pin_bpi_m1p: gmac_power_pin@0 { + allwinner,pins = "PH23"; + allwinner,function = "gpio_out"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + }; + + led_pins_bpi_m1p: led_pins@0 { + allwinner,pins = "PH24", "PH25"; + allwinner,function = "gpio_out"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + }; + + mmc0_cd_pin_bpi_m1p: mmc0_cd_pin@0 { + allwinner,pins = "PH10"; + allwinner,function = "gpio_in"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; + }; + + mmc3_pwrseq_pin_bpi_m1p: mmc3_pwrseq_pin@0 { + allwinner,pins = "PH22"; + allwinner,function = "gpio_out"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + }; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pins_a>; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/sun7i-a20-lamobo-r1.dts b/arch/arm/boot/dts/sun7i-a20-lamobo-r1.dts index 5ee43d8bf..73c05dab0 100644 --- a/arch/arm/boot/dts/sun7i-a20-lamobo-r1.dts +++ b/arch/arm/boot/dts/sun7i-a20-lamobo-r1.dts @@ -95,6 +95,10 @@ status = "okay"; }; +&codec { + status = "okay"; +}; + &cpu0 { cpu-supply = <®_dcdc2>; }; @@ -110,13 +114,67 @@ &gmac { pinctrl-names = "default"; pinctrl-0 = <&gmac_pins_rgmii_a>; - phy = <&phy1>; phy-mode = "rgmii"; phy-supply = <®_gmac_3v3>; status = "okay"; - phy1: ethernet-phy@1 { - reg = <1>; + fixed-link { + speed = <1000>; + full-duplex; + }; + + mdio { + compatible = "snps,dwmac-mdio"; + #address-cells = <1>; + #size-cells = <0>; + + switch: ethernet-switch@1e { + compatible = "brcm,bcm53125"; + reg = <30>; + #address-cells = <1>; + #size-cells = <0>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port0: port@0 { + reg = <0>; + label = "lan2"; + }; + + port1: port@1 { + reg = <1>; + label = "lan3"; + }; + + port2: port@2 { + reg = <2>; + label = "lan4"; + }; + + port3: port@3 { + reg = <3>; + label = "wan"; + }; + + port4: port@4 { + reg = <4>; + label = "lan1"; + }; + + port8: port@8 { + reg = <8>; + label = "cpu"; + ethernet = <&gmac>; + phy-mode = "rgmii"; + fixed-link { + speed = <1000>; + full-duplex; + }; + }; + }; + }; }; }; @@ -158,10 +216,6 @@ status = "okay"; }; -&ohci1 { - status = "okay"; -}; - &otg_sram { status = "okay"; }; @@ -199,7 +253,7 @@ #include "axp209.dtsi" ®_ahci_5v { - gpio = <&pio 1 3 0>; /* PB3 */ + gpio = <&pio 1 3 GPIO_ACTIVE_HIGH>; /* PB3 */ status = "okay"; }; @@ -232,11 +286,8 @@ status = "okay"; }; -®_usb1_vbus { - status = "okay"; -}; - ®_usb2_vbus { + gpio = <&pio 7 12 GPIO_ACTIVE_HIGH>; /* PH12 */ status = "okay"; }; @@ -275,13 +326,16 @@ status = "okay"; }; +&usb2_vbus_pin_a { + allwinner,pins = "PH12"; +}; + &usbphy { pinctrl-names = "default"; pinctrl-0 = <&usb0_id_detect_pin>; usb0_id_det-gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */ usb0_vbus_power-supply = <&usb_power_supply>; usb0_vbus-supply = <®_usb0_vbus>; - usb1_vbus-supply = <®_usb1_vbus>; usb2_vbus-supply = <®_usb2_vbus>; status = "okay"; }; diff --git a/arch/arm/boot/dts/sun7i-a20.dtsi b/arch/arm/boot/dts/sun7i-a20.dtsi index 2c34bbbb9..bd0c47660 100644 --- a/arch/arm/boot/dts/sun7i-a20.dtsi +++ b/arch/arm/boot/dts/sun7i-a20.dtsi @@ -67,9 +67,9 @@ compatible = "allwinner,simple-framebuffer", "simple-framebuffer"; allwinner,pipeline = "de_be0-lcd0-hdmi"; - clocks = <&pll3>, <&pll5 1>, <&ahb_gates 36>, - <&ahb_gates 43>, <&ahb_gates 44>, - <&dram_gates 26>; + clocks = <&ahb_gates 36>, <&ahb_gates 43>, + <&ahb_gates 44>, <&de_be0_clk>, + <&tcon0_ch1_clk>, <&dram_gates 26>; status = "disabled"; }; @@ -77,8 +77,9 @@ compatible = "allwinner,simple-framebuffer", "simple-framebuffer"; allwinner,pipeline = "de_be0-lcd0"; - clocks = <&pll3>, <&pll5 1>, <&ahb_gates 36>, - <&ahb_gates 44>, <&dram_gates 26>; + clocks = <&ahb_gates 36>, <&ahb_gates 44>, + <&de_be0_clk>, <&tcon0_ch0_clk>, + <&dram_gates 26>; status = "disabled"; }; @@ -86,8 +87,9 @@ compatible = "allwinner,simple-framebuffer", "simple-framebuffer"; allwinner,pipeline = "de_be0-lcd0-tve0"; - clocks = <&pll3>, <&pll5 1>, - <&ahb_gates 34>, <&ahb_gates 36>, <&ahb_gates 44>, + clocks = <&ahb_gates 34>, <&ahb_gates 36>, + <&ahb_gates 44>, + <&de_be0_clk>, <&tcon0_ch1_clk>, <&dram_gates 5>, <&dram_gates 26>; status = "disabled"; }; @@ -369,9 +371,9 @@ <5>, <6>, <7>, <8>, <10>; clock-output-names = "apb0_codec", "apb0_spdif", - "apb0_ac97", "apb0_iis0", "apb0_iis1", + "apb0_ac97", "apb0_i2s0", "apb0_i2s1", "apb0_pio", "apb0_ir0", "apb0_ir1", - "apb0_iis2", "apb0_keypad"; + "apb0_i2s2", "apb0_keypad"; }; apb1: clk@01c20058 { @@ -521,6 +523,28 @@ clock-output-names = "ir1"; }; + i2s0_clk: clk@01c200b8 { + #clock-cells = <0>; + compatible = "allwinner,sun4i-a10-mod1-clk"; + reg = <0x01c200b8 0x4>; + clocks = <&pll2 SUN4I_A10_PLL2_8X>, + <&pll2 SUN4I_A10_PLL2_4X>, + <&pll2 SUN4I_A10_PLL2_2X>, + <&pll2 SUN4I_A10_PLL2_1X>; + clock-output-names = "i2s0"; + }; + + ac97_clk: clk@01c200bc { + #clock-cells = <0>; + compatible = "allwinner,sun4i-a10-mod1-clk"; + reg = <0x01c200bc 0x4>; + clocks = <&pll2 SUN4I_A10_PLL2_8X>, + <&pll2 SUN4I_A10_PLL2_4X>, + <&pll2 SUN4I_A10_PLL2_2X>, + <&pll2 SUN4I_A10_PLL2_1X>; + clock-output-names = "ac97"; + }; + spdif_clk: clk@01c200c0 { #clock-cells = <0>; compatible = "allwinner,sun4i-a10-mod1-clk"; @@ -558,6 +582,28 @@ clock-output-names = "spi3"; }; + i2s1_clk: clk@01c200d8 { + #clock-cells = <0>; + compatible = "allwinner,sun4i-a10-mod1-clk"; + reg = <0x01c200d8 0x4>; + clocks = <&pll2 SUN4I_A10_PLL2_8X>, + <&pll2 SUN4I_A10_PLL2_4X>, + <&pll2 SUN4I_A10_PLL2_2X>, + <&pll2 SUN4I_A10_PLL2_1X>; + clock-output-names = "i2s1"; + }; + + i2s2_clk: clk@01c200dc { + #clock-cells = <0>; + compatible = "allwinner,sun4i-a10-mod1-clk"; + reg = <0x01c200dc 0x4>; + clocks = <&pll2 SUN4I_A10_PLL2_8X>, + <&pll2 SUN4I_A10_PLL2_4X>, + <&pll2 SUN4I_A10_PLL2_2X>, + <&pll2 SUN4I_A10_PLL2_1X>; + clock-output-names = "i2s2"; + }; + dram_gates: clk@01c20100 { #clock-cells = <1>; compatible = "allwinner,sun4i-a10-dram-gates-clk"; @@ -583,6 +629,80 @@ "dram_de_mp", "dram_ace"; }; + de_be0_clk: clk@01c20104 { + #clock-cells = <0>; + #reset-cells = <0>; + compatible = "allwinner,sun4i-a10-display-clk"; + reg = <0x01c20104 0x4>; + clocks = <&pll3>, <&pll7>, <&pll5 1>; + clock-output-names = "de-be0"; + }; + + de_be1_clk: clk@01c20108 { + #clock-cells = <0>; + #reset-cells = <0>; + compatible = "allwinner,sun4i-a10-display-clk"; + reg = <0x01c20108 0x4>; + clocks = <&pll3>, <&pll7>, <&pll5 1>; + clock-output-names = "de-be1"; + }; + + de_fe0_clk: clk@01c2010c { + #clock-cells = <0>; + #reset-cells = <0>; + compatible = "allwinner,sun4i-a10-display-clk"; + reg = <0x01c2010c 0x4>; + clocks = <&pll3>, <&pll7>, <&pll5 1>; + clock-output-names = "de-fe0"; + }; + + de_fe1_clk: clk@01c20110 { + #clock-cells = <0>; + #reset-cells = <0>; + compatible = "allwinner,sun4i-a10-display-clk"; + reg = <0x01c20110 0x4>; + clocks = <&pll3>, <&pll7>, <&pll5 1>; + clock-output-names = "de-fe1"; + }; + + tcon0_ch0_clk: clk@01c20118 { + #clock-cells = <0>; + #reset-cells = <1>; + compatible = "allwinner,sun4i-a10-tcon-ch0-clk"; + reg = <0x01c20118 0x4>; + clocks = <&pll3>, <&pll7>, <&pll3x2>, <&pll7x2>; + clock-output-names = "tcon0-ch0-sclk"; + + }; + + tcon1_ch0_clk: clk@01c2011c { + #clock-cells = <0>; + #reset-cells = <1>; + compatible = "allwinner,sun4i-a10-tcon-ch1-clk"; + reg = <0x01c2011c 0x4>; + clocks = <&pll3>, <&pll7>, <&pll3x2>, <&pll7x2>; + clock-output-names = "tcon1-ch0-sclk"; + + }; + + tcon0_ch1_clk: clk@01c2012c { + #clock-cells = <0>; + compatible = "allwinner,sun4i-a10-tcon-ch0-clk"; + reg = <0x01c2012c 0x4>; + clocks = <&pll3>, <&pll7>, <&pll3x2>, <&pll7x2>; + clock-output-names = "tcon0-ch1-sclk"; + + }; + + tcon1_ch1_clk: clk@01c20130 { + #clock-cells = <0>; + compatible = "allwinner,sun4i-a10-tcon-ch1-clk"; + reg = <0x01c20130 0x4>; + clocks = <&pll3>, <&pll7>, <&pll3x2>, <&pll7x2>; + clock-output-names = "tcon1-ch1-sclk"; + + }; + ve_clk: clk@01c2013c { #clock-cells = <0>; #reset-cells = <0>; @@ -726,6 +846,19 @@ #dma-cells = <2>; }; + nfc: nand@01c03000 { + compatible = "allwinner,sun4i-a10-nand"; + reg = <0x01c03000 0x1000>; + interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ahb_gates 13>, <&nand_clk>; + clock-names = "ahb", "mod"; + dmas = <&dma SUN4I_DMA_DEDICATED 3>; + dma-names = "rxtx"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; + }; + spi0: spi@01c05000 { compatible = "allwinner,sun4i-a10-spi"; reg = <0x01c05000 0x1000>; @@ -958,160 +1091,177 @@ #interrupt-cells = <3>; #gpio-cells = <3>; - pwm0_pins_a: pwm0@0 { - allwinner,pins = "PB2"; - allwinner,function = "pwm"; + clk_out_a_pins_a: clk_out_a@0 { + allwinner,pins = "PI12"; + allwinner,function = "clk_out_a"; allwinner,drive = <SUN4I_PINCTRL_10_MA>; allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; - pwm1_pins_a: pwm1@0 { - allwinner,pins = "PI3"; - allwinner,function = "pwm"; + clk_out_b_pins_a: clk_out_b@0 { + allwinner,pins = "PI13"; + allwinner,function = "clk_out_b"; allwinner,drive = <SUN4I_PINCTRL_10_MA>; allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; - uart0_pins_a: uart0@0 { - allwinner,pins = "PB22", "PB23"; - allwinner,function = "uart0"; + emac_pins_a: emac0@0 { + allwinner,pins = "PA0", "PA1", "PA2", + "PA3", "PA4", "PA5", "PA6", + "PA7", "PA8", "PA9", "PA10", + "PA11", "PA12", "PA13", "PA14", + "PA15", "PA16"; + allwinner,function = "emac"; allwinner,drive = <SUN4I_PINCTRL_10_MA>; allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; - uart2_pins_a: uart2@0 { - allwinner,pins = "PI16", "PI17", "PI18", "PI19"; - allwinner,function = "uart2"; + gmac_pins_mii_a: gmac_mii@0 { + allwinner,pins = "PA0", "PA1", "PA2", + "PA3", "PA4", "PA5", "PA6", + "PA7", "PA8", "PA9", "PA10", + "PA11", "PA12", "PA13", "PA14", + "PA15", "PA16"; + allwinner,function = "gmac"; allwinner,drive = <SUN4I_PINCTRL_10_MA>; allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; - uart3_pins_a: uart3@0 { - allwinner,pins = "PG6", "PG7", "PG8", "PG9"; - allwinner,function = "uart3"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; + gmac_pins_rgmii_a: gmac_rgmii@0 { + allwinner,pins = "PA0", "PA1", "PA2", + "PA3", "PA4", "PA5", "PA6", + "PA7", "PA8", "PA10", + "PA11", "PA12", "PA13", + "PA15", "PA16"; + allwinner,function = "gmac"; + /* + * data lines in RGMII mode use DDR mode + * and need a higher signal drive strength + */ + allwinner,drive = <SUN4I_PINCTRL_40_MA>; allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; - uart3_pins_b: uart3@1 { - allwinner,pins = "PH0", "PH1"; - allwinner,function = "uart3"; + i2c0_pins_a: i2c0@0 { + allwinner,pins = "PB0", "PB1"; + allwinner,function = "i2c0"; allwinner,drive = <SUN4I_PINCTRL_10_MA>; allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; - uart4_pins_a: uart4@0 { - allwinner,pins = "PG10", "PG11"; - allwinner,function = "uart4"; + i2c1_pins_a: i2c1@0 { + allwinner,pins = "PB18", "PB19"; + allwinner,function = "i2c1"; allwinner,drive = <SUN4I_PINCTRL_10_MA>; allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; - uart4_pins_b: uart4@1 { - allwinner,pins = "PH4", "PH5"; - allwinner,function = "uart4"; + i2c2_pins_a: i2c2@0 { + allwinner,pins = "PB20", "PB21"; + allwinner,function = "i2c2"; allwinner,drive = <SUN4I_PINCTRL_10_MA>; allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; - uart5_pins_a: uart5@0 { - allwinner,pins = "PI10", "PI11"; - allwinner,function = "uart5"; + i2c3_pins_a: i2c3@0 { + allwinner,pins = "PI0", "PI1"; + allwinner,function = "i2c3"; allwinner,drive = <SUN4I_PINCTRL_10_MA>; allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; - uart6_pins_a: uart6@0 { - allwinner,pins = "PI12", "PI13"; - allwinner,function = "uart6"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + ir0_rx_pins_a: ir0@0 { + allwinner,pins = "PB4"; + allwinner,function = "ir0"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; - uart7_pins_a: uart7@0 { - allwinner,pins = "PI20", "PI21"; - allwinner,function = "uart7"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + ir0_tx_pins_a: ir0@1 { + allwinner,pins = "PB3"; + allwinner,function = "ir0"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; - i2c0_pins_a: i2c0@0 { - allwinner,pins = "PB0", "PB1"; - allwinner,function = "i2c0"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + ir1_rx_pins_a: ir1@0 { + allwinner,pins = "PB23"; + allwinner,function = "ir1"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; - i2c1_pins_a: i2c1@0 { - allwinner,pins = "PB18", "PB19"; - allwinner,function = "i2c1"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + ir1_tx_pins_a: ir1@1 { + allwinner,pins = "PB22"; + allwinner,function = "ir1"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; - i2c2_pins_a: i2c2@0 { - allwinner,pins = "PB20", "PB21"; - allwinner,function = "i2c2"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; + mmc0_pins_a: mmc0@0 { + allwinner,pins = "PF0", "PF1", "PF2", + "PF3", "PF4", "PF5"; + allwinner,function = "mmc0"; + allwinner,drive = <SUN4I_PINCTRL_30_MA>; allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; - i2c3_pins_a: i2c3@0 { - allwinner,pins = "PI0", "PI1"; - allwinner,function = "i2c3"; + mmc0_cd_pin_reference_design: mmc0_cd_pin@0 { + allwinner,pins = "PH1"; + allwinner,function = "gpio_in"; allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; + }; + + mmc2_pins_a: mmc2@0 { + allwinner,pins = "PC6", "PC7", "PC8", + "PC9", "PC10", "PC11"; + allwinner,function = "mmc2"; + allwinner,drive = <SUN4I_PINCTRL_30_MA>; + allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; + }; + + mmc3_pins_a: mmc3@0 { + allwinner,pins = "PI4", "PI5", "PI6", + "PI7", "PI8", "PI9"; + allwinner,function = "mmc3"; + allwinner,drive = <SUN4I_PINCTRL_30_MA>; allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; - emac_pins_a: emac0@0 { - allwinner,pins = "PA0", "PA1", "PA2", - "PA3", "PA4", "PA5", "PA6", - "PA7", "PA8", "PA9", "PA10", - "PA11", "PA12", "PA13", "PA14", - "PA15", "PA16"; - allwinner,function = "emac"; + ps20_pins_a: ps20@0 { + allwinner,pins = "PI20", "PI21"; + allwinner,function = "ps2"; allwinner,drive = <SUN4I_PINCTRL_10_MA>; allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; - clk_out_a_pins_a: clk_out_a@0 { - allwinner,pins = "PI12"; - allwinner,function = "clk_out_a"; + ps21_pins_a: ps21@0 { + allwinner,pins = "PH12", "PH13"; + allwinner,function = "ps2"; allwinner,drive = <SUN4I_PINCTRL_10_MA>; allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; - clk_out_b_pins_a: clk_out_b@0 { - allwinner,pins = "PI13"; - allwinner,function = "clk_out_b"; + pwm0_pins_a: pwm0@0 { + allwinner,pins = "PB2"; + allwinner,function = "pwm"; allwinner,drive = <SUN4I_PINCTRL_10_MA>; allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; - gmac_pins_mii_a: gmac_mii@0 { - allwinner,pins = "PA0", "PA1", "PA2", - "PA3", "PA4", "PA5", "PA6", - "PA7", "PA8", "PA9", "PA10", - "PA11", "PA12", "PA13", "PA14", - "PA15", "PA16"; - allwinner,function = "gmac"; + pwm1_pins_a: pwm1@0 { + allwinner,pins = "PI3"; + allwinner,function = "pwm"; allwinner,drive = <SUN4I_PINCTRL_10_MA>; allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; - gmac_pins_rgmii_a: gmac_rgmii@0 { - allwinner,pins = "PA0", "PA1", "PA2", - "PA3", "PA4", "PA5", "PA6", - "PA7", "PA8", "PA10", - "PA11", "PA12", "PA13", - "PA15", "PA16"; - allwinner,function = "gmac"; - /* - * data lines in RGMII mode use DDR mode - * and need a higher signal drive strength - */ - allwinner,drive = <SUN4I_PINCTRL_40_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + spdif_tx_pins_a: spdif@0 { + allwinner,pins = "PB13"; + allwinner,function = "spdif"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; }; spi0_pins_a: spi0@0 { @@ -1177,84 +1327,67 @@ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; - mmc0_pins_a: mmc0@0 { - allwinner,pins = "PF0", "PF1", "PF2", - "PF3", "PF4", "PF5"; - allwinner,function = "mmc0"; - allwinner,drive = <SUN4I_PINCTRL_30_MA>; + uart0_pins_a: uart0@0 { + allwinner,pins = "PB22", "PB23"; + allwinner,function = "uart0"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; - mmc0_cd_pin_reference_design: mmc0_cd_pin@0 { - allwinner,pins = "PH1"; - allwinner,function = "gpio_in"; + uart2_pins_a: uart2@0 { + allwinner,pins = "PI16", "PI17", "PI18", "PI19"; + allwinner,function = "uart2"; allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; - }; - - mmc2_pins_a: mmc2@0 { - allwinner,pins = "PC6", "PC7", "PC8", - "PC9", "PC10", "PC11"; - allwinner,function = "mmc2"; - allwinner,drive = <SUN4I_PINCTRL_30_MA>; - allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; - }; - - mmc3_pins_a: mmc3@0 { - allwinner,pins = "PI4", "PI5", "PI6", - "PI7", "PI8", "PI9"; - allwinner,function = "mmc3"; - allwinner,drive = <SUN4I_PINCTRL_30_MA>; allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; - ir0_rx_pins_a: ir0@0 { - allwinner,pins = "PB4"; - allwinner,function = "ir0"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + uart3_pins_a: uart3@0 { + allwinner,pins = "PG6", "PG7", "PG8", "PG9"; + allwinner,function = "uart3"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; - ir0_tx_pins_a: ir0@1 { - allwinner,pins = "PB3"; - allwinner,function = "ir0"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + uart3_pins_b: uart3@1 { + allwinner,pins = "PH0", "PH1"; + allwinner,function = "uart3"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; - ir1_rx_pins_a: ir1@0 { - allwinner,pins = "PB23"; - allwinner,function = "ir1"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + uart4_pins_a: uart4@0 { + allwinner,pins = "PG10", "PG11"; + allwinner,function = "uart4"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; - ir1_tx_pins_a: ir1@1 { - allwinner,pins = "PB22"; - allwinner,function = "ir1"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + uart4_pins_b: uart4@1 { + allwinner,pins = "PH4", "PH5"; + allwinner,function = "uart4"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; - ps20_pins_a: ps20@0 { - allwinner,pins = "PI20", "PI21"; - allwinner,function = "ps2"; + uart5_pins_a: uart5@0 { + allwinner,pins = "PI10", "PI11"; + allwinner,function = "uart5"; allwinner,drive = <SUN4I_PINCTRL_10_MA>; allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; - ps21_pins_a: ps21@0 { - allwinner,pins = "PH12", "PH13"; - allwinner,function = "ps2"; + uart6_pins_a: uart6@0 { + allwinner,pins = "PI12", "PI13"; + allwinner,function = "uart6"; allwinner,drive = <SUN4I_PINCTRL_10_MA>; allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; - spdif_tx_pins_a: spdif@0 { - allwinner,pins = "PB13"; - allwinner,function = "spdif"; + uart7_pins_a: uart7@0 { + allwinner,pins = "PI20", "PI21"; + allwinner,function = "uart7"; allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; }; @@ -1320,6 +1453,32 @@ status = "disabled"; }; + i2s1: i2s@01c22000 { + #sound-dai-cells = <0>; + compatible = "allwinner,sun4i-a10-i2s"; + reg = <0x01c22000 0x400>; + interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&apb0_gates 4>, <&i2s1_clk>; + clock-names = "apb", "mod"; + dmas = <&dma SUN4I_DMA_NORMAL 4>, + <&dma SUN4I_DMA_NORMAL 4>; + dma-names = "rx", "tx"; + status = "disabled"; + }; + + i2s0: i2s@01c22400 { + #sound-dai-cells = <0>; + compatible = "allwinner,sun4i-a10-i2s"; + reg = <0x01c22400 0x400>; + interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&apb0_gates 3>, <&i2s0_clk>; + clock-names = "apb", "mod"; + dmas = <&dma SUN4I_DMA_NORMAL 3>, + <&dma SUN4I_DMA_NORMAL 3>; + dma-names = "rx", "tx"; + status = "disabled"; + }; + lradc: lradc@01c22800 { compatible = "allwinner,sun4i-a10-lradc-keys"; reg = <0x01c22800 0x100>; @@ -1345,6 +1504,19 @@ reg = <0x01c23800 0x200>; }; + i2s2: i2s@01c24400 { + #sound-dai-cells = <0>; + compatible = "allwinner,sun4i-a10-i2s"; + reg = <0x01c24400 0x400>; + interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&apb0_gates 8>, <&i2s2_clk>; + clock-names = "apb", "mod"; + dmas = <&dma SUN4I_DMA_NORMAL 6>, + <&dma SUN4I_DMA_NORMAL 6>; + dma-names = "rx", "tx"; + status = "disabled"; + }; + rtp: rtp@01c25000 { compatible = "allwinner,sun5i-a13-ts"; reg = <0x01c25000 0x100>; diff --git a/arch/arm/boot/dts/sun8i-a23-inet86dz.dts b/arch/arm/boot/dts/sun8i-a23-inet86dz.dts new file mode 100644 index 000000000..0f9f71b14 --- /dev/null +++ b/arch/arm/boot/dts/sun8i-a23-inet86dz.dts @@ -0,0 +1,58 @@ +/* + * Copyright 2016 Hans de Goede <hdegoede@redhat.com> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; +#include "sun8i-a23.dtsi" +#include "sun8i-reference-design-tablet.dtsi" + +/ { + model = "INet-86DZ Rev 01"; + compatible = "primux,inet86dz", "allwinner,sun8i-a23"; +}; + +&ehci0 { + status = "okay"; +}; + +&usbphy { + usb1_vbus-supply = <®_dldo1>; +}; diff --git a/arch/arm/boot/dts/sun8i-a23-polaroid-mid2407pxe03.dts b/arch/arm/boot/dts/sun8i-a23-polaroid-mid2407pxe03.dts new file mode 100644 index 000000000..e3004428e --- /dev/null +++ b/arch/arm/boot/dts/sun8i-a23-polaroid-mid2407pxe03.dts @@ -0,0 +1,50 @@ +/* + * Copyright 2016 Hans de Goede <hdegoede@redhat.com> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; +#include "sun8i-a23.dtsi" +#include "sun8i-reference-design-tablet.dtsi" + +/ { + model = "Polaroid MID2407PXE03 tablet"; + compatible = "polaroid,mid2407pxe03", "allwinner,sun8i-a23"; +}; diff --git a/arch/arm/boot/dts/sun8i-a23-polaroid-mid2809pxe04.dts b/arch/arm/boot/dts/sun8i-a23-polaroid-mid2809pxe04.dts index cb5daafcb..6d06e24d4 100644 --- a/arch/arm/boot/dts/sun8i-a23-polaroid-mid2809pxe04.dts +++ b/arch/arm/boot/dts/sun8i-a23-polaroid-mid2809pxe04.dts @@ -42,202 +42,9 @@ /dts-v1/; #include "sun8i-a23.dtsi" -#include "sunxi-common-regulators.dtsi" - -#include <dt-bindings/gpio/gpio.h> -#include <dt-bindings/input/input.h> -#include <dt-bindings/pinctrl/sun4i-a10.h> -#include <dt-bindings/pwm/pwm.h> +#include "sun8i-reference-design-tablet.dtsi" / { model = "Polaroid MID2809PXE04 tablet"; compatible = "polaroid,mid2809pxe04", "allwinner,sun8i-a23"; - - aliases { - serial0 = &r_uart; - }; - - backlight: backlight { - compatible = "pwm-backlight"; - pinctrl-names = "default"; - pinctrl-0 = <&bl_en_pin_mid2809>; - pwms = <&pwm 0 50000 PWM_POLARITY_INVERTED>; - brightness-levels = <0 10 20 30 40 50 60 70 80 90 100>; - default-brightness-level = <8>; - enable-gpios = <&pio 7 6 GPIO_ACTIVE_HIGH>; /* PH6 */ - }; - - chosen { - stdout-path = "serial0:115200n8"; - }; -}; - -&ehci0 { - status = "okay"; -}; - -&i2c0 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c0_pins_a>; - status = "okay"; -}; - -&i2c1 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c1_pins_a>; - status = "okay"; -}; - -&lradc { - vref-supply = <®_vcc3v0>; - status = "okay"; - - button@200 { - label = "Volume Up"; - linux,code = <KEY_VOLUMEUP>; - channel = <0>; - voltage = <200000>; - }; - - button@400 { - label = "Volume Down"; - linux,code = <KEY_VOLUMEDOWN>; - channel = <0>; - voltage = <400000>; - }; -}; - -&mmc0 { - pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_mid2809>; - vmmc-supply = <®_dcdc1>; - bus-width = <4>; - cd-gpios = <&pio 1 4 GPIO_ACTIVE_HIGH>; /* PB4 */ - cd-inverted; - status = "okay"; -}; - -&pio { - bl_en_pin_mid2809: bl_en_pin@0 { - allwinner,pins = "PH6"; - allwinner,function = "gpio_in"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; - }; - - mmc0_cd_pin_mid2809: mmc0_cd_pin@0 { - allwinner,pins = "PB4"; - allwinner,function = "gpio_in"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; - }; -}; - -&pwm { - pinctrl-names = "default"; - pinctrl-0 = <&pwm0_pins>; - status = "okay"; -}; - -&r_rsb { - status = "okay"; - - axp22x: pmic@3a3 { - compatible = "x-powers,axp223"; - reg = <0x3a3>; - interrupt-parent = <&nmi_intc>; - interrupts = <0 IRQ_TYPE_LEVEL_LOW>; - eldoin-supply = <®_dcdc1>; - }; -}; - -&r_uart { - pinctrl-names = "default"; - pinctrl-0 = <&r_uart_pins_a>; - status = "okay"; -}; - -#include "axp22x.dtsi" - -®_aldo1 { - regulator-always-on; - regulator-min-microvolt = <3000000>; - regulator-max-microvolt = <3000000>; - regulator-name = "vcc-io"; -}; - -®_aldo2 { - regulator-always-on; - regulator-min-microvolt = <2350000>; - regulator-max-microvolt = <2650000>; - regulator-name = "vdd-dll"; -}; - -®_aldo3 { - regulator-always-on; - regulator-min-microvolt = <2700000>; - regulator-max-microvolt = <3300000>; - regulator-name = "vcc-pll-avcc"; -}; - -®_dc1sw { - regulator-name = "vcc-lcd"; -}; - -®_dc5ldo { - regulator-always-on; - regulator-min-microvolt = <900000>; - regulator-max-microvolt = <1400000>; - regulator-name = "vdd-cpus"; -}; - -®_dcdc1 { - regulator-always-on; - regulator-min-microvolt = <3000000>; - regulator-max-microvolt = <3000000>; - regulator-name = "vcc-3v0"; -}; - -®_dcdc2 { - regulator-always-on; - regulator-min-microvolt = <900000>; - regulator-max-microvolt = <1400000>; - regulator-name = "vdd-sys"; -}; - -®_dcdc3 { - regulator-always-on; - regulator-min-microvolt = <900000>; - regulator-max-microvolt = <1400000>; - regulator-name = "vdd-cpu"; -}; - -®_dcdc5 { - regulator-always-on; - regulator-min-microvolt = <1500000>; - regulator-max-microvolt = <1500000>; - regulator-name = "vcc-dram"; -}; - -®_rtc_ldo { - regulator-name = "vcc-rtc"; -}; - -&simplefb_lcd { - vcc-lcd-supply = <®_dc1sw>; -}; - -/* - * FIXME for now we only support host mode and rely on u-boot to have - * turned on Vbus which is controlled by the axp223 pmic on the board. - * - * Once we have axp223 support we should switch to fully supporting otg. - */ -&usb_otg { - dr_mode = "host"; - status = "okay"; -}; - -&usbphy { - status = "okay"; }; diff --git a/arch/arm/boot/dts/sun8i-a23-q8-tablet.dts b/arch/arm/boot/dts/sun8i-a23-q8-tablet.dts index 6062ea7a9..956320a6c 100644 --- a/arch/arm/boot/dts/sun8i-a23-q8-tablet.dts +++ b/arch/arm/boot/dts/sun8i-a23-q8-tablet.dts @@ -48,18 +48,3 @@ model = "Q8 A23 Tablet"; compatible = "allwinner,q8-a23", "allwinner,sun8i-a23"; }; - -/* - * FIXME for now we only support host mode and rely on u-boot to have - * turned on Vbus which is controlled by the axp223 pmic on the board. - * - * Once we have axp223 support we should switch to fully supporting otg. - */ -&usb_otg { - dr_mode = "host"; - status = "okay"; -}; - -&usbphy { - status = "okay"; -}; diff --git a/arch/arm/boot/dts/sun8i-a33-ga10h-v1.1.dts b/arch/arm/boot/dts/sun8i-a33-ga10h-v1.1.dts index 1aefc6793..656603240 100644 --- a/arch/arm/boot/dts/sun8i-a33-ga10h-v1.1.dts +++ b/arch/arm/boot/dts/sun8i-a33-ga10h-v1.1.dts @@ -42,59 +42,18 @@ /dts-v1/; #include "sun8i-a33.dtsi" -#include "sunxi-common-regulators.dtsi" - -#include <dt-bindings/gpio/gpio.h> -#include <dt-bindings/input/input.h> -#include <dt-bindings/pinctrl/sun4i-a10.h> +#include "sun8i-reference-design-tablet.dtsi" / { model = "Allwinner GA10H Quad Core Tablet (v1.1)"; compatible = "allwinner,ga10h-v1.1", "allwinner,sun8i-a33"; - - aliases { - serial0 = &r_uart; - }; - - chosen { - stdout-path = "serial0:115200n8"; - }; }; &ehci0 { status = "okay"; }; -&i2c0 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c0_pins_a>; - status = "okay"; -}; - -&i2c1 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c1_pins_a>; - status = "okay"; -}; - &lradc { - vref-supply = <®_vcc3v0>; - status = "okay"; - - button@200 { - label = "Volume Up"; - linux,code = <KEY_VOLUMEUP>; - channel = <0>; - voltage = <200000>; - }; - - button@400 { - label = "Volume Down"; - linux,code = <KEY_VOLUMEDOWN>; - channel = <0>; - voltage = <400000>; - }; - button@600 { label = "Back"; linux,code = <KEY_BACK>; @@ -103,40 +62,6 @@ }; }; -&mmc0 { - pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_q8h>; - vmmc-supply = <®_vcc3v0>; - bus-width = <4>; - cd-gpios = <&pio 1 4 GPIO_ACTIVE_HIGH>; /* PB4 */ - cd-inverted; - status = "okay"; -}; - &ohci0 { status = "okay"; }; - -&pio { - mmc0_cd_pin_q8h: mmc0_cd_pin@0 { - allwinner,pins = "PB4"; - allwinner,function = "gpio_in"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; - }; -}; - -&r_uart { - pinctrl-names = "default"; - pinctrl-0 = <&r_uart_pins_a>; - status = "okay"; -}; - -&usb_otg { - dr_mode = "host"; - status = "okay"; -}; - -&usbphy { - status = "okay"; -}; diff --git a/arch/arm/boot/dts/sun8i-a33-q8-tablet.dts b/arch/arm/boot/dts/sun8i-a33-q8-tablet.dts index 44b32296a..b0bc2360f 100644 --- a/arch/arm/boot/dts/sun8i-a33-q8-tablet.dts +++ b/arch/arm/boot/dts/sun8i-a33-q8-tablet.dts @@ -48,18 +48,3 @@ model = "Q8 A33 Tablet"; compatible = "allwinner,q8-a33", "allwinner,sun8i-a33"; }; - -/* - * FIXME for now we only support host mode and rely on u-boot to have - * turned on Vbus which is controlled by the axp223 pmic on the board. - * - * Once we have axp223 support we should switch to fully supporting otg. - */ -&usb_otg { - dr_mode = "host"; - status = "okay"; -}; - -&usbphy { - status = "okay"; -}; diff --git a/arch/arm/boot/dts/sun8i-h3-bananapi-m2-plus.dts b/arch/arm/boot/dts/sun8i-h3-bananapi-m2-plus.dts new file mode 100644 index 000000000..f3b1d5f6d --- /dev/null +++ b/arch/arm/boot/dts/sun8i-h3-bananapi-m2-plus.dts @@ -0,0 +1,195 @@ +/* + * Copyright (C) 2016 Chen-Yu Tsai <wens@csie.org> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; +#include "sun8i-h3.dtsi" +#include "sunxi-common-regulators.dtsi" + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> +#include <dt-bindings/pinctrl/sun4i-a10.h> + +/ { + model = "Banana Pi BPI-M2-Plus"; + compatible = "sinovoip,bpi-m2-plus", "allwinner,sun8i-h3"; + + aliases { + serial0 = &uart0; + serial1 = &uart1; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&pwr_led_bpi_m2p>; + + pwr_led { + label = "bananapi-m2-plus:red:pwr"; + gpios = <&r_pio 0 10 GPIO_ACTIVE_HIGH>; /* PL10 */ + default-state = "on"; + }; + }; + + gpio_keys { + compatible = "gpio-keys"; + pinctrl-names = "default"; + pinctrl-0 = <&sw_r_bpi_m2p>; + + sw4 { + label = "power"; + linux,code = <BTN_0>; + gpios = <&r_pio 0 3 GPIO_ACTIVE_LOW>; + }; + }; + + wifi_pwrseq: wifi_pwrseq { + compatible = "mmc-pwrseq-simple"; + pinctrl-names = "default"; + pinctrl-0 = <&wifi_en_bpi_m2p>; + reset-gpios = <&r_pio 0 7 GPIO_ACTIVE_LOW>; /* PL7 */ + }; +}; + +&ehci1 { + status = "okay"; +}; + +&ehci2 { + status = "okay"; +}; + +&ir { + pinctrl-names = "default"; + pinctrl-0 = <&ir_pins_a>; + status = "okay"; +}; + +&mmc0 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin>; + vmmc-supply = <®_vcc3v3>; + bus-width = <4>; + cd-gpios = <&pio 5 6 GPIO_ACTIVE_HIGH>; /* PF6 */ + cd-inverted; + status = "okay"; +}; + +&mmc1 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc1_pins_a>; + vmmc-supply = <®_vcc3v3>; + vqmmc-supply = <®_vcc3v3>; + mmc-pwrseq = <&wifi_pwrseq>; + bus-width = <4>; + non-removable; + status = "okay"; + + brcmf: bcrmf@1 { + reg = <1>; + compatible = "brcm,bcm4329-fmac"; + interrupt-parent = <&pio>; + interrupts = <6 10 IRQ_TYPE_LEVEL_LOW>; /* PG10 / EINT10 */ + interrupt-names = "host-wake"; + }; +}; + +&mmc2 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc2_8bit_pins>; + vmmc-supply = <®_vcc3v3>; + vqmmc-supply = <®_vcc3v3>; + bus-width = <8>; + non-removable; + status = "okay"; +}; + +&ohci1 { + status = "okay"; +}; + +&ohci2 { + status = "okay"; +}; + +&r_pio { + pwr_led_bpi_m2p: led_pins@0 { + allwinner,pins = "PL10"; + allwinner,function = "gpio_out"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + }; + + sw_r_bpi_m2p: key_pins@0 { + allwinner,pins = "PL3"; + allwinner,function = "gpio_in"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + }; + + wifi_en_bpi_m2p: wifi_en_pin { + allwinner,pins = "PL7"; + allwinner,function = "gpio_out"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + }; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pins_a>; + status = "okay"; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&uart1_pins_a>; + status = "okay"; +}; + +&usbphy { + /* USB VBUS is on as long as VCC-IO is on */ + status = "okay"; +}; diff --git a/arch/arm/boot/dts/sun8i-h3.dtsi b/arch/arm/boot/dts/sun8i-h3.dtsi index 4a4926b0b..fdf9fdbda 100644 --- a/arch/arm/boot/dts/sun8i-h3.dtsi +++ b/arch/arm/boot/dts/sun8i-h3.dtsi @@ -42,8 +42,10 @@ #include "skeleton.dtsi" +#include <dt-bindings/clock/sun8i-h3-ccu.h> #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/pinctrl/sun4i-a10.h> +#include <dt-bindings/reset/sun8i-h3-ccu.h> / { interrupt-parent = <&gic>; @@ -104,191 +106,6 @@ clock-output-names = "osc32k"; }; - pll1: clk@01c20000 { - #clock-cells = <0>; - compatible = "allwinner,sun8i-a23-pll1-clk"; - reg = <0x01c20000 0x4>; - clocks = <&osc24M>; - clock-output-names = "pll1"; - }; - - /* dummy clock until actually implemented */ - pll5: pll5_clk { - #clock-cells = <0>; - compatible = "fixed-clock"; - clock-frequency = <0>; - clock-output-names = "pll5"; - }; - - pll6: clk@01c20028 { - #clock-cells = <1>; - compatible = "allwinner,sun6i-a31-pll6-clk"; - reg = <0x01c20028 0x4>; - clocks = <&osc24M>; - clock-output-names = "pll6", "pll6x2"; - }; - - pll6d2: pll6d2_clk { - #clock-cells = <0>; - compatible = "fixed-factor-clock"; - clock-div = <2>; - clock-mult = <1>; - clocks = <&pll6 0>; - clock-output-names = "pll6d2"; - }; - - /* dummy clock until pll6 can be reused */ - pll8: pll8_clk { - #clock-cells = <0>; - compatible = "fixed-clock"; - clock-frequency = <1>; - clock-output-names = "pll8"; - }; - - cpu: cpu_clk@01c20050 { - #clock-cells = <0>; - compatible = "allwinner,sun4i-a10-cpu-clk"; - reg = <0x01c20050 0x4>; - clocks = <&osc32k>, <&osc24M>, <&pll1>, <&pll1>; - clock-output-names = "cpu"; - }; - - axi: axi_clk@01c20050 { - #clock-cells = <0>; - compatible = "allwinner,sun4i-a10-axi-clk"; - reg = <0x01c20050 0x4>; - clocks = <&cpu>; - clock-output-names = "axi"; - }; - - ahb1: ahb1_clk@01c20054 { - #clock-cells = <0>; - compatible = "allwinner,sun6i-a31-ahb1-clk"; - reg = <0x01c20054 0x4>; - clocks = <&osc32k>, <&osc24M>, <&axi>, <&pll6 0>; - clock-output-names = "ahb1"; - }; - - ahb2: ahb2_clk@01c2005c { - #clock-cells = <0>; - compatible = "allwinner,sun8i-h3-ahb2-clk"; - reg = <0x01c2005c 0x4>; - clocks = <&ahb1>, <&pll6d2>; - clock-output-names = "ahb2"; - }; - - apb1: apb1_clk@01c20054 { - #clock-cells = <0>; - compatible = "allwinner,sun4i-a10-apb0-clk"; - reg = <0x01c20054 0x4>; - clocks = <&ahb1>; - clock-output-names = "apb1"; - }; - - apb2: apb2_clk@01c20058 { - #clock-cells = <0>; - compatible = "allwinner,sun4i-a10-apb1-clk"; - reg = <0x01c20058 0x4>; - clocks = <&osc32k>, <&osc24M>, <&pll6 0>, <&pll6 0>; - clock-output-names = "apb2"; - }; - - bus_gates: clk@01c20060 { - #clock-cells = <1>; - compatible = "allwinner,sun8i-h3-bus-gates-clk"; - reg = <0x01c20060 0x14>; - clocks = <&ahb1>, <&ahb2>, <&apb1>, <&apb2>; - clock-names = "ahb1", "ahb2", "apb1", "apb2"; - clock-indices = <5>, <6>, <8>, - <9>, <10>, <13>, - <14>, <17>, <18>, - <19>, <20>, - <21>, <23>, - <24>, <25>, - <26>, <27>, - <28>, <29>, - <30>, <31>, <32>, - <35>, <36>, <37>, - <40>, <41>, <43>, - <44>, <52>, <53>, - <54>, <64>, - <65>, <69>, <72>, - <76>, <77>, <78>, - <96>, <97>, <98>, - <112>, <113>, - <114>, <115>, - <116>, <128>, <135>; - clock-output-names = "bus_ce", "bus_dma", "bus_mmc0", - "bus_mmc1", "bus_mmc2", "bus_nand", - "bus_sdram", "bus_gmac", "bus_ts", - "bus_hstimer", "bus_spi0", - "bus_spi1", "bus_otg", - "bus_otg_ehci0", "bus_ehci1", - "bus_ehci2", "bus_ehci3", - "bus_otg_ohci0", "bus_ohci1", - "bus_ohci2", "bus_ohci3", "bus_ve", - "bus_lcd0", "bus_lcd1", "bus_deint", - "bus_csi", "bus_tve", "bus_hdmi", - "bus_de", "bus_gpu", "bus_msgbox", - "bus_spinlock", "bus_codec", - "bus_spdif", "bus_pio", "bus_ths", - "bus_i2s0", "bus_i2s1", "bus_i2s2", - "bus_i2c0", "bus_i2c1", "bus_i2c2", - "bus_uart0", "bus_uart1", - "bus_uart2", "bus_uart3", - "bus_scr", "bus_ephy", "bus_dbg"; - }; - - mmc0_clk: clk@01c20088 { - #clock-cells = <1>; - compatible = "allwinner,sun4i-a10-mmc-clk"; - reg = <0x01c20088 0x4>; - clocks = <&osc24M>, <&pll6 0>, <&pll8>; - clock-output-names = "mmc0", - "mmc0_output", - "mmc0_sample"; - }; - - mmc1_clk: clk@01c2008c { - #clock-cells = <1>; - compatible = "allwinner,sun4i-a10-mmc-clk"; - reg = <0x01c2008c 0x4>; - clocks = <&osc24M>, <&pll6 0>, <&pll8>; - clock-output-names = "mmc1", - "mmc1_output", - "mmc1_sample"; - }; - - mmc2_clk: clk@01c20090 { - #clock-cells = <1>; - compatible = "allwinner,sun4i-a10-mmc-clk"; - reg = <0x01c20090 0x4>; - clocks = <&osc24M>, <&pll6 0>, <&pll8>; - clock-output-names = "mmc2", - "mmc2_output", - "mmc2_sample"; - }; - - usb_clk: clk@01c200cc { - #clock-cells = <1>; - #reset-cells = <1>; - compatible = "allwinner,sun8i-h3-usb-clk"; - reg = <0x01c200cc 0x4>; - clocks = <&osc24M>; - clock-output-names = "usb_phy0", "usb_phy1", - "usb_phy2", "usb_phy3", - "usb_ohci0", "usb_ohci1", - "usb_ohci2", "usb_ohci3"; - }; - - mbus_clk: clk@01c2015c { - #clock-cells = <0>; - compatible = "allwinner,sun8i-a23-mbus-clk"; - reg = <0x01c2015c 0x4>; - clocks = <&osc24M>, <&pll6 1>, <&pll5>; - clock-output-names = "mbus"; - }; - apb0: apb0_clk { compatible = "fixed-factor-clock"; #clock-cells = <0>; @@ -327,23 +144,23 @@ compatible = "allwinner,sun8i-h3-dma"; reg = <0x01c02000 0x1000>; interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&bus_gates 6>; - resets = <&ahb_rst 6>; + clocks = <&ccu CLK_BUS_DMA>; + resets = <&ccu RST_BUS_DMA>; #dma-cells = <1>; }; mmc0: mmc@01c0f000 { compatible = "allwinner,sun5i-a13-mmc"; reg = <0x01c0f000 0x1000>; - clocks = <&bus_gates 8>, - <&mmc0_clk 0>, - <&mmc0_clk 1>, - <&mmc0_clk 2>; + clocks = <&ccu CLK_BUS_MMC0>, + <&ccu CLK_MMC0>, + <&ccu CLK_MMC0_OUTPUT>, + <&ccu CLK_MMC0_SAMPLE>; clock-names = "ahb", "mmc", "output", "sample"; - resets = <&ahb_rst 8>; + resets = <&ccu RST_BUS_MMC0>; reset-names = "ahb"; interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>; status = "disabled"; @@ -354,15 +171,15 @@ mmc1: mmc@01c10000 { compatible = "allwinner,sun5i-a13-mmc"; reg = <0x01c10000 0x1000>; - clocks = <&bus_gates 9>, - <&mmc1_clk 0>, - <&mmc1_clk 1>, - <&mmc1_clk 2>; + clocks = <&ccu CLK_BUS_MMC1>, + <&ccu CLK_MMC1>, + <&ccu CLK_MMC1_OUTPUT>, + <&ccu CLK_MMC1_SAMPLE>; clock-names = "ahb", "mmc", "output", "sample"; - resets = <&ahb_rst 9>; + resets = <&ccu RST_BUS_MMC1>; reset-names = "ahb"; interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>; status = "disabled"; @@ -373,15 +190,15 @@ mmc2: mmc@01c11000 { compatible = "allwinner,sun5i-a13-mmc"; reg = <0x01c11000 0x1000>; - clocks = <&bus_gates 10>, - <&mmc2_clk 0>, - <&mmc2_clk 1>, - <&mmc2_clk 2>; + clocks = <&ccu CLK_BUS_MMC2>, + <&ccu CLK_MMC2>, + <&ccu CLK_MMC2_OUTPUT>, + <&ccu CLK_MMC2_SAMPLE>; clock-names = "ahb", "mmc", "output", "sample"; - resets = <&ahb_rst 10>; + resets = <&ccu RST_BUS_MMC2>; reset-names = "ahb"; interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>; status = "disabled"; @@ -401,18 +218,18 @@ "pmu1", "pmu2", "pmu3"; - clocks = <&usb_clk 8>, - <&usb_clk 9>, - <&usb_clk 10>, - <&usb_clk 11>; + clocks = <&ccu CLK_USB_PHY0>, + <&ccu CLK_USB_PHY1>, + <&ccu CLK_USB_PHY2>, + <&ccu CLK_USB_PHY3>; clock-names = "usb0_phy", "usb1_phy", "usb2_phy", "usb3_phy"; - resets = <&usb_clk 0>, - <&usb_clk 1>, - <&usb_clk 2>, - <&usb_clk 3>; + resets = <&ccu RST_USB_PHY0>, + <&ccu RST_USB_PHY1>, + <&ccu RST_USB_PHY2>, + <&ccu RST_USB_PHY3>; reset-names = "usb0_reset", "usb1_reset", "usb2_reset", @@ -425,8 +242,8 @@ compatible = "allwinner,sun8i-h3-ehci", "generic-ehci"; reg = <0x01c1b000 0x100>; interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&bus_gates 25>, <&bus_gates 29>; - resets = <&ahb_rst 25>, <&ahb_rst 29>; + clocks = <&ccu CLK_BUS_EHCI1>, <&ccu CLK_BUS_OHCI1>; + resets = <&ccu RST_BUS_EHCI1>, <&ccu RST_BUS_OHCI1>; phys = <&usbphy 1>; phy-names = "usb"; status = "disabled"; @@ -436,9 +253,9 @@ compatible = "allwinner,sun8i-h3-ohci", "generic-ohci"; reg = <0x01c1b400 0x100>; interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&bus_gates 29>, <&bus_gates 25>, - <&usb_clk 17>; - resets = <&ahb_rst 29>, <&ahb_rst 25>; + clocks = <&ccu CLK_BUS_EHCI1>, <&ccu CLK_BUS_OHCI1>, + <&ccu CLK_USB_OHCI1>; + resets = <&ccu RST_BUS_EHCI1>, <&ccu RST_BUS_OHCI1>; phys = <&usbphy 1>; phy-names = "usb"; status = "disabled"; @@ -448,8 +265,8 @@ compatible = "allwinner,sun8i-h3-ehci", "generic-ehci"; reg = <0x01c1c000 0x100>; interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&bus_gates 26>, <&bus_gates 30>; - resets = <&ahb_rst 26>, <&ahb_rst 30>; + clocks = <&ccu CLK_BUS_EHCI2>, <&ccu CLK_BUS_OHCI2>; + resets = <&ccu RST_BUS_EHCI2>, <&ccu RST_BUS_OHCI2>; phys = <&usbphy 2>; phy-names = "usb"; status = "disabled"; @@ -459,9 +276,9 @@ compatible = "allwinner,sun8i-h3-ohci", "generic-ohci"; reg = <0x01c1c400 0x100>; interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&bus_gates 30>, <&bus_gates 26>, - <&usb_clk 18>; - resets = <&ahb_rst 30>, <&ahb_rst 26>; + clocks = <&ccu CLK_BUS_EHCI2>, <&ccu CLK_BUS_OHCI2>, + <&ccu CLK_USB_OHCI2>; + resets = <&ccu RST_BUS_EHCI2>, <&ccu RST_BUS_OHCI2>; phys = <&usbphy 2>; phy-names = "usb"; status = "disabled"; @@ -471,8 +288,8 @@ compatible = "allwinner,sun8i-h3-ehci", "generic-ehci"; reg = <0x01c1d000 0x100>; interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&bus_gates 27>, <&bus_gates 31>; - resets = <&ahb_rst 27>, <&ahb_rst 31>; + clocks = <&ccu CLK_BUS_EHCI3>, <&ccu CLK_BUS_OHCI3>; + resets = <&ccu RST_BUS_EHCI3>, <&ccu RST_BUS_OHCI3>; phys = <&usbphy 3>; phy-names = "usb"; status = "disabled"; @@ -482,32 +299,34 @@ compatible = "allwinner,sun8i-h3-ohci", "generic-ohci"; reg = <0x01c1d400 0x100>; interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&bus_gates 31>, <&bus_gates 27>, - <&usb_clk 19>; - resets = <&ahb_rst 31>, <&ahb_rst 27>; + clocks = <&ccu CLK_BUS_EHCI3>, <&ccu CLK_BUS_OHCI3>, + <&ccu CLK_USB_OHCI3>; + resets = <&ccu RST_BUS_EHCI3>, <&ccu RST_BUS_OHCI3>; phys = <&usbphy 3>; phy-names = "usb"; status = "disabled"; }; + ccu: clock@01c20000 { + compatible = "allwinner,sun8i-h3-ccu"; + reg = <0x01c20000 0x400>; + clocks = <&osc24M>, <&osc32k>; + clock-names = "hosc", "losc"; + #clock-cells = <1>; + #reset-cells = <1>; + }; + pio: pinctrl@01c20800 { compatible = "allwinner,sun8i-h3-pinctrl"; reg = <0x01c20800 0x400>; interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&bus_gates 69>; + clocks = <&ccu CLK_BUS_PIO>; gpio-controller; #gpio-cells = <3>; interrupt-controller; #interrupt-cells = <3>; - uart0_pins_a: uart0@0 { - allwinner,pins = "PA4", "PA5"; - allwinner,function = "uart0"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; - }; - mmc0_pins_a: mmc0@0 { allwinner,pins = "PF0", "PF1", "PF2", "PF3", "PF4", "PF5"; @@ -540,24 +359,20 @@ allwinner,drive = <SUN4I_PINCTRL_30_MA>; allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; - }; - ahb_rst: reset@01c202c0 { - #reset-cells = <1>; - compatible = "allwinner,sun6i-a31-ahb1-reset"; - reg = <0x01c202c0 0xc>; - }; - - apb1_rst: reset@01c202d0 { - #reset-cells = <1>; - compatible = "allwinner,sun6i-a31-clock-reset"; - reg = <0x01c202d0 0x4>; - }; + uart0_pins_a: uart0@0 { + allwinner,pins = "PA4", "PA5"; + allwinner,function = "uart0"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + }; - apb2_rst: reset@01c202d8 { - #reset-cells = <1>; - compatible = "allwinner,sun6i-a31-clock-reset"; - reg = <0x01c202d8 0x4>; + uart1_pins_a: uart1@0 { + allwinner,pins = "PG6", "PG7", "PG8", "PG9"; + allwinner,function = "uart1"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + }; }; timer@01c20c00 { @@ -580,8 +395,8 @@ interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>; reg-shift = <2>; reg-io-width = <4>; - clocks = <&bus_gates 112>; - resets = <&apb2_rst 16>; + clocks = <&ccu CLK_BUS_UART0>; + resets = <&ccu RST_BUS_UART0>; dmas = <&dma 6>, <&dma 6>; dma-names = "rx", "tx"; status = "disabled"; @@ -593,8 +408,8 @@ interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>; reg-shift = <2>; reg-io-width = <4>; - clocks = <&bus_gates 113>; - resets = <&apb2_rst 17>; + clocks = <&ccu CLK_BUS_UART1>; + resets = <&ccu RST_BUS_UART1>; dmas = <&dma 7>, <&dma 7>; dma-names = "rx", "tx"; status = "disabled"; @@ -606,8 +421,8 @@ interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>; reg-shift = <2>; reg-io-width = <4>; - clocks = <&bus_gates 114>; - resets = <&apb2_rst 18>; + clocks = <&ccu CLK_BUS_UART2>; + resets = <&ccu RST_BUS_UART2>; dmas = <&dma 8>, <&dma 8>; dma-names = "rx", "tx"; status = "disabled"; @@ -619,8 +434,8 @@ interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>; reg-shift = <2>; reg-io-width = <4>; - clocks = <&bus_gates 115>; - resets = <&apb2_rst 19>; + clocks = <&ccu CLK_BUS_UART3>; + resets = <&ccu RST_BUS_UART3>; dmas = <&dma 9>, <&dma 9>; dma-names = "rx", "tx"; status = "disabled"; diff --git a/arch/arm/boot/dts/sun8i-q8-common.dtsi b/arch/arm/boot/dts/sun8i-q8-common.dtsi index 346a49d80..60fa95850 100644 --- a/arch/arm/boot/dts/sun8i-q8-common.dtsi +++ b/arch/arm/boot/dts/sun8i-q8-common.dtsi @@ -39,140 +39,13 @@ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR * OTHER DEALINGS IN THE SOFTWARE. */ -#include "sunxi-q8-common.dtsi" +#include "sunxi-reference-design-tablet.dtsi" +#include "sun8i-reference-design-tablet.dtsi" -#include <dt-bindings/pwm/pwm.h> - -/ { - aliases { - serial0 = &r_uart; - }; - - backlight: backlight { - compatible = "pwm-backlight"; - pinctrl-names = "default"; - pinctrl-0 = <&bl_en_pin_q8>; - pwms = <&pwm 0 50000 PWM_POLARITY_INVERTED>; - brightness-levels = <0 10 20 30 40 50 60 70 80 90 100>; - default-brightness-level = <8>; - enable-gpios = <&pio 7 6 GPIO_ACTIVE_HIGH>; /* PH6 */ - }; - - chosen { - stdout-path = "serial0:115200n8"; - }; -}; - -&mmc0 { - pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_q8>; - vmmc-supply = <®_dcdc1>; - bus-width = <4>; - cd-gpios = <&pio 1 4 GPIO_ACTIVE_HIGH>; /* PB4 */ - cd-inverted; - status = "okay"; -}; - -&pio { - bl_en_pin_q8: bl_en_pin@0 { - allwinner,pins = "PH6"; - allwinner,function = "gpio_in"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; - }; - - mmc0_cd_pin_q8: mmc0_cd_pin@0 { - allwinner,pins = "PB4"; - allwinner,function = "gpio_in"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; - }; -}; - -&r_rsb { - status = "okay"; - - axp22x: pmic@3a3 { - compatible = "x-powers,axp223"; - reg = <0x3a3>; - interrupt-parent = <&nmi_intc>; - interrupts = <0 IRQ_TYPE_LEVEL_LOW>; - eldoin-supply = <®_dcdc1>; - }; -}; - -#include "axp22x.dtsi" - -®_aldo1 { - regulator-always-on; - regulator-min-microvolt = <3000000>; - regulator-max-microvolt = <3000000>; - regulator-name = "vcc-io"; -}; - -®_aldo2 { - regulator-always-on; - regulator-min-microvolt = <2350000>; - regulator-max-microvolt = <2650000>; - regulator-name = "vdd-dll"; -}; - -®_aldo3 { - regulator-always-on; - regulator-min-microvolt = <2700000>; - regulator-max-microvolt = <3300000>; - regulator-name = "vcc-pll-avcc"; -}; - -®_dc1sw { - regulator-name = "vcc-lcd"; -}; - -®_dc5ldo { - regulator-always-on; - regulator-min-microvolt = <900000>; - regulator-max-microvolt = <1400000>; - regulator-name = "vdd-cpus"; -}; - -®_dcdc1 { - regulator-always-on; - regulator-min-microvolt = <3000000>; - regulator-max-microvolt = <3000000>; - regulator-name = "vcc-3v0"; -}; - -®_dcdc2 { - regulator-always-on; - regulator-min-microvolt = <900000>; - regulator-max-microvolt = <1400000>; - regulator-name = "vdd-sys"; -}; - -®_dcdc3 { - regulator-always-on; - regulator-min-microvolt = <900000>; - regulator-max-microvolt = <1400000>; - regulator-name = "vdd-cpu"; -}; - -®_dcdc5 { - regulator-always-on; - regulator-min-microvolt = <1500000>; - regulator-max-microvolt = <1500000>; - regulator-name = "vcc-dram"; -}; - -®_rtc_ldo { - regulator-name = "vcc-rtc"; -}; - -&r_uart { - pinctrl-names = "default"; - pinctrl-0 = <&r_uart_pins_a>; - status = "okay"; +&ehci0 { + status = "okay"; }; -&simplefb_lcd { - vcc-lcd-supply = <®_dc1sw>; +&usbphy { + usb1_vbus-supply = <®_dldo1>; }; diff --git a/arch/arm/boot/dts/sun8i-r16-parrot.dts b/arch/arm/boot/dts/sun8i-r16-parrot.dts new file mode 100644 index 000000000..47553e522 --- /dev/null +++ b/arch/arm/boot/dts/sun8i-r16-parrot.dts @@ -0,0 +1,351 @@ +/* + * Copyright 2016 Quentin Schulz + * + * Quentin Schulz <quentin.schulz@free-electrons.com> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; +#include "sun8i-a33.dtsi" +#include "sunxi-common-regulators.dtsi" + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> + +/ { + model = "Allwinner R16 EVB (Parrot)"; + compatible = "allwinner,parrot", "allwinner,sun8i-a33"; + + aliases { + serial0 = &uart0; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&led_pins_parrot>; + + led1 { + label = "parrot:led1:usr"; + gpio = <&pio 4 17 GPIO_ACTIVE_HIGH>; /* PE17 */ + }; + + led2 { + label = "parrot:led2:usr"; + gpio = <&pio 4 16 GPIO_ACTIVE_HIGH>; /* PE16 */ + }; + }; + + wifi_pwrseq: wifi_pwrseq { + compatible = "mmc-pwrseq-simple"; + reset-gpios = <&r_pio 0 6 GPIO_ACTIVE_LOW>; /* PL06 */ + }; + +}; + +&ehci0 { + status = "okay"; +}; + +&i2c1 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_pins_a>; + status = "okay"; + + /* + * FIXME: An as-yet-unknown accelerometer is connected to this + * i2c bus. + */ +}; + +&lradc { + vref-supply = <®_aldo3>; + status = "okay"; + + button@0 { + label = "V+"; + linux,code = <KEY_VOLUMEUP>; + channel = <0>; + voltage = <190000>; + }; + + button@1 { + label = "V-"; + linux,code = <KEY_VOLUMEDOWN>; + channel = <0>; + voltage = <390000>; + }; + +}; + +&mmc0 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_parrot>; + vmmc-supply = <®_dcdc1>; + cd-gpios = <&pio 3 14 GPIO_ACTIVE_LOW>; /* PD14 */ + bus-width = <4>; + status = "okay"; +}; + +&mmc1 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc1_pins_a>, <&wifi_reset_pin_parrot>; + vmmc-supply = <®_aldo1>; + mmc-pwrseq = <&wifi_pwrseq>; + bus-width = <4>; + non-removable; + status = "okay"; +}; + +&mmc2 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc2_8bit_pins>; + vmmc-supply = <®_dcdc1>; + bus-width = <8>; + non-removable; + cap-mmc-hw-reset; + status = "okay"; +}; + +&mmc2_8bit_pins { + allwinner,drive = <SUN4I_PINCTRL_40_MA>; + allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; +}; + +&ohci0 { + status = "okay"; +}; + +&pio { + mmc0_cd_pin_parrot: mmc0_cd_pin@0 { + allwinner,pins = "PD14"; + allwinner,function = "gpio_in"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; + }; + + led_pins_parrot: led_pins@0 { + allwinner,pins = "PE16", "PE17"; + allwinner,function = "gpio_out"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + }; + + usb0_id_det: usb0_id_detect_pin@0 { + allwinner,pins = "PD10"; + allwinner,function = "gpio_in"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; + }; + + usb1_vbus_pin_parrot: usb1_vbus_pin@0 { + allwinner,pins = "PD12"; + allwinner,function = "gpio_out"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + }; +}; + +&r_pio { + wifi_reset_pin_parrot: wifi_reset_pin@0 { + allwinner,pins = "PL6"; + allwinner,function = "gpio_out"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + }; +}; + +&r_rsb { + status = "okay"; + + axp22x: pmic@3a3 { + compatible = "x-powers,axp223"; + reg = <0x3a3>; + interrupt-parent = <&nmi_intc>; + interrupts = <0 IRQ_TYPE_LEVEL_LOW>; + drivevbus-supply = <®_vcc5v0>; + x-powers,drive-vbus-en; + }; +}; + +#include "axp22x.dtsi" + +®_aldo1 { + regulator-always-on; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-name = "vcc-io"; +}; + +®_aldo2 { + regulator-always-on; + regulator-min-microvolt = <2350000>; + regulator-max-microvolt = <2650000>; + regulator-name = "vdd-dll"; +}; + +®_aldo3 { + regulator-always-on; + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc-pll-avcc"; +}; + +®_dc5ldo { + regulator-always-on; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <1400000>; + regulator-name = "vdd-cpus"; +}; + +®_dcdc1 { + regulator-always-on; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-name = "vcc-3v0"; +}; + +®_dcdc2 { + regulator-always-on; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <1400000>; + regulator-name = "vdd-sys"; +}; + +®_dcdc3 { + regulator-always-on; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <1400000>; + regulator-name = "vdd-cpu"; +}; + +®_dcdc5 { + regulator-always-on; + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <1500000>; + regulator-name = "vcc-dram"; +}; + +®_dldo1 { + /* + * TODO: WiFi chip needs dldo1 AND dldo2 to be on to be powered. + * Remove next line once it is possible to sync two regulators. + */ + regulator-always-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc-wifi0"; +}; + +®_dldo2 { + /* + * TODO: WiFi chip needs dldo1 AND dldo2 to be on to be powered. + * Remove next line once it is possible to sync two regulators. + */ + regulator-always-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc-wifi1"; +}; + +®_dldo3 { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-name = "vcc-3v0-csi"; +}; + +®_drivevbus { + regulator-name = "usb0-vbus"; + status = "okay"; +}; + +®_eldo1 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-name = "vcc-1v2-hsic"; +}; + +®_eldo2 { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-name = "vcc-dsp"; +}; + +®_eldo3 { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-name = "eldo3"; +}; + +®_usb1_vbus { + pinctrl-names = "default"; + pinctrl-0 = <&usb1_vbus_pin_parrot>; + gpio = <&pio 3 12 GPIO_ACTIVE_HIGH>; /* PD12 */ + status = "okay"; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pins_b>; + status = "okay"; +}; + +&usb_otg { + dr_mode = "otg"; + status = "okay"; +}; + +&usb_power_supply { + status = "okay"; +}; + +&usbphy { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&usb0_id_det>; + usb0_vbus-supply = <®_drivevbus>; + usb0_id_det-gpios = <&pio 3 10 GPIO_ACTIVE_HIGH>; /* PD10 */ + usb0_vbus_power-supply = <&usb_power_supply>; + usb1_vbus-supply = <®_usb1_vbus>; +}; diff --git a/arch/arm/boot/dts/sun8i-reference-design-tablet.dtsi b/arch/arm/boot/dts/sun8i-reference-design-tablet.dtsi new file mode 100644 index 000000000..9d9036140 --- /dev/null +++ b/arch/arm/boot/dts/sun8i-reference-design-tablet.dtsi @@ -0,0 +1,216 @@ +/* + * Copyright 2015 Hans de Goede <hdegoede@redhat.com> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ +#include "sunxi-reference-design-tablet.dtsi" + +#include <dt-bindings/pwm/pwm.h> + +/ { + aliases { + serial0 = &r_uart; + }; + + backlight: backlight { + compatible = "pwm-backlight"; + pinctrl-names = "default"; + pinctrl-0 = <&bl_en_pin>; + pwms = <&pwm 0 50000 PWM_POLARITY_INVERTED>; + brightness-levels = <0 10 20 30 40 50 60 70 80 90 100>; + default-brightness-level = <8>; + enable-gpios = <&pio 7 6 GPIO_ACTIVE_HIGH>; /* PH6 */ + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; +}; + +&mmc0 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin>; + vmmc-supply = <®_dcdc1>; + bus-width = <4>; + cd-gpios = <&pio 1 4 GPIO_ACTIVE_HIGH>; /* PB4 */ + cd-inverted; + status = "okay"; +}; + +&pio { + bl_en_pin: bl_en_pin@0 { + allwinner,pins = "PH6"; + allwinner,function = "gpio_in"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + }; + + mmc0_cd_pin: mmc0_cd_pin@0 { + allwinner,pins = "PB4"; + allwinner,function = "gpio_in"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; + }; + + usb0_id_detect_pin: usb0_id_detect_pin@0 { + allwinner,pins = "PH8"; + allwinner,function = "gpio_in"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; + }; +}; + +&r_rsb { + status = "okay"; + + axp22x: pmic@3a3 { + compatible = "x-powers,axp223"; + reg = <0x3a3>; + interrupt-parent = <&nmi_intc>; + interrupts = <0 IRQ_TYPE_LEVEL_LOW>; + eldoin-supply = <®_dcdc1>; + drivevbus-supply = <®_vcc5v0>; + x-powers,drive-vbus-en; + }; +}; + +#include "axp22x.dtsi" + +®_aldo1 { + regulator-always-on; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-name = "vcc-io"; +}; + +®_aldo2 { + regulator-always-on; + regulator-min-microvolt = <2350000>; + regulator-max-microvolt = <2650000>; + regulator-name = "vdd-dll"; +}; + +®_aldo3 { + regulator-always-on; + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc-pll-avcc"; +}; + +®_dc1sw { + regulator-name = "vcc-lcd"; +}; + +®_dc5ldo { + regulator-always-on; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <1400000>; + regulator-name = "vdd-cpus"; +}; + +®_dcdc1 { + regulator-always-on; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-name = "vcc-3v0"; +}; + +®_dcdc2 { + regulator-always-on; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <1400000>; + regulator-name = "vdd-sys"; +}; + +®_dcdc3 { + regulator-always-on; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <1400000>; + regulator-name = "vdd-cpu"; +}; + +®_dcdc5 { + regulator-always-on; + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <1500000>; + regulator-name = "vcc-dram"; +}; + +®_dldo1 { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc-wifi"; +}; + +®_drivevbus { + regulator-name = "usb0-vbus"; + status = "okay"; +}; + +®_rtc_ldo { + regulator-name = "vcc-rtc"; +}; + +&r_uart { + pinctrl-names = "default"; + pinctrl-0 = <&r_uart_pins_a>; + status = "okay"; +}; + +&simplefb_lcd { + vcc-lcd-supply = <®_dc1sw>; +}; + +&usb_otg { + dr_mode = "otg"; + status = "okay"; +}; + +&usb_power_supply { + status = "okay"; +}; + +&usbphy { + pinctrl-names = "default"; + pinctrl-0 = <&usb0_id_detect_pin>; + usb0_id_det-gpio = <&pio 7 8 GPIO_ACTIVE_HIGH>; /* PH8 */ + usb0_vbus_power-supply = <&usb_power_supply>; + usb0_vbus-supply = <®_drivevbus>; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/sun9i-a80-cubieboard4.dts b/arch/arm/boot/dts/sun9i-a80-cubieboard4.dts index eb2ccd0a3..1526b41c7 100644 --- a/arch/arm/boot/dts/sun9i-a80-cubieboard4.dts +++ b/arch/arm/boot/dts/sun9i-a80-cubieboard4.dts @@ -45,7 +45,6 @@ /dts-v1/; #include "sun9i-a80.dtsi" -#include "sunxi-common-regulators.dtsi" #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/pinctrl/sun4i-a10.h> @@ -79,26 +78,10 @@ }; }; -&pio { - led_pins_cubieboard4: led-pins@0 { - allwinner,pins = "PH6", "PH17"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; - }; - - mmc0_cd_pin_cubieboard4: mmc0_cd_pin@0 { - allwinner,pins = "PH18"; - allwinner,function = "gpio_in"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; - }; -}; - &mmc0 { pinctrl-names = "default"; pinctrl-0 = <&mmc0_pins>, <&mmc0_cd_pin_cubieboard4>; - vmmc-supply = <®_vcc3v0>; + vmmc-supply = <®_dcdc1>; bus-width = <4>; cd-gpios = <&pio 7 18 GPIO_ACTIVE_HIGH>; /* PH18 */ cd-inverted; @@ -108,7 +91,7 @@ &mmc2 { pinctrl-names = "default"; pinctrl-0 = <&mmc2_8bit_pins>; - vmmc-supply = <®_vcc3v0>; + vmmc-supply = <®_dcdc1>; bus-width = <8>; non-removable; cap-mmc-hw-reset; @@ -120,14 +103,157 @@ allwinner,drive = <SUN4I_PINCTRL_40_MA>; }; +&pio { + led_pins_cubieboard4: led-pins@0 { + allwinner,pins = "PH6", "PH17"; + allwinner,function = "gpio_out"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + }; + + mmc0_cd_pin_cubieboard4: mmc0_cd_pin@0 { + allwinner,pins = "PH18"; + allwinner,function = "gpio_in"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; + }; +}; + &r_ir { status = "okay"; }; &r_rsb { status = "okay"; + + axp809: pmic@3a3 { + reg = <0x3a3>; + interrupt-parent = <&nmi_intc>; + interrupts = <0 IRQ_TYPE_LEVEL_LOW>; + + regulators { + reg_aldo1: aldo1 { + /* + * TODO: This should be handled by the + * USB PHY driver. + */ + regulator-always-on; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-name = "vcc33-usbh"; + }; + + reg_aldo2: aldo2 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-name = "vcc-pb-io-cam"; + }; + + aldo3 { + /* unused */ + }; + + reg_dc5ldo: dc5ldo { + regulator-always-on; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1100000>; + regulator-name = "vdd-cpus-09-usbh"; + }; + + reg_dcdc1: dcdc1 { + regulator-always-on; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-name = "vcc-3v"; + }; + + reg_dcdc2: dcdc2 { + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1100000>; + regulator-name = "vdd-gpu"; + }; + + reg_dcdc3: dcdc3 { + regulator-always-on; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1100000>; + regulator-name = "vdd-cpua"; + }; + + reg_dcdc4: dcdc4 { + regulator-always-on; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1100000>; + regulator-name = "vdd-sys-usb0-hdmi"; + }; + + reg_dcdc5: dcdc5 { + regulator-always-on; + regulator-min-microvolt = <1425000>; + regulator-max-microvolt = <1575000>; + regulator-name = "vcc-dram"; + }; + + reg_dldo1: dldo1 { + /* + * The WiFi chip supports a wide range + * (3.0 ~ 4.8V) of voltages, and so does + * this regulator (3.0 ~ 4.2V), but + * Allwinner SDK always sets it to 3.3V. + */ + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc-wifi"; + }; + + reg_dldo2: dldo2 { + regulator-always-on; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-name = "vcc-pl"; + }; + + reg_eldo1: eldo1 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-name = "vcc-dvdd-cam"; + }; + + reg_eldo2: eldo2 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-name = "vcc-pe"; + }; + + reg_eldo3: eldo3 { + regulator-always-on; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-name = "vcc-pm-codec-io1"; + }; + + reg_ldo_io0: ldo_io0 { + regulator-always-on; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-name = "vcc-pg"; + }; + + reg_ldo_io1: ldo_io1 { + regulator-min-microvolt = <2500000>; + regulator-max-microvolt = <2500000>; + regulator-name = "vcc-pa-gmac-2v5"; + }; + + reg_rtc_ldo: rtc_ldo { + regulator-name = "vcc-rtc-vdd1v8-io"; + }; + }; + }; }; +#include "axp809.dtsi" + &uart0 { pinctrl-names = "default"; pinctrl-0 = <&uart0_pins_a>; diff --git a/arch/arm/boot/dts/sun9i-a80-optimus.dts b/arch/arm/boot/dts/sun9i-a80-optimus.dts index d7a20d92b..7fd22e888 100644 --- a/arch/arm/boot/dts/sun9i-a80-optimus.dts +++ b/arch/arm/boot/dts/sun9i-a80-optimus.dts @@ -44,7 +44,6 @@ /dts-v1/; #include "sun9i-a80.dtsi" -#include "sunxi-common-regulators.dtsi" #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/pinctrl/sun4i-a10.h> @@ -85,6 +84,17 @@ }; }; + reg_usb1_vbus: usb1-vbus { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&usb1_vbus_pin_optimus>; + regulator-name = "usb1-vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + enable-active-high; + gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */ + }; + reg_usb3_vbus: usb3-vbus { compatible = "regulator-fixed"; pinctrl-names = "default"; @@ -109,6 +119,31 @@ status = "okay"; }; +&mmc0 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_pins>, <&mmc0_cd_pin_optimus>; + vmmc-supply = <®_dcdc1>; + bus-width = <4>; + cd-gpios = <&pio 7 18 GPIO_ACTIVE_HIGH>; /* PH8 */ + cd-inverted; + status = "okay"; +}; + +&mmc2 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc2_8bit_pins>; + vmmc-supply = <®_dcdc1>; + bus-width = <8>; + non-removable; + cap-mmc-hw-reset; + status = "okay"; +}; + +&mmc2_8bit_pins { + /* Increase drive strength for DDR modes */ + allwinner,drive = <SUN4I_PINCTRL_40_MA>; +}; + &ohci0 { status = "okay"; }; @@ -147,37 +182,6 @@ }; }; -&mmc0 { - pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins>, <&mmc0_cd_pin_optimus>; - vmmc-supply = <®_vcc3v0>; - bus-width = <4>; - cd-gpios = <&pio 7 18 GPIO_ACTIVE_HIGH>; /* PH8 */ - cd-inverted; - status = "okay"; -}; - -&mmc2 { - pinctrl-names = "default"; - pinctrl-0 = <&mmc2_8bit_pins>; - vmmc-supply = <®_vcc3v0>; - bus-width = <8>; - non-removable; - cap-mmc-hw-reset; - status = "okay"; -}; - -&mmc2_8bit_pins { - /* Increase drive strength for DDR modes */ - allwinner,drive = <SUN4I_PINCTRL_40_MA>; -}; - -®_usb1_vbus { - pinctrl-0 = <&usb1_vbus_pin_optimus>; - gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */ - status = "okay"; -}; - &r_ir { status = "okay"; }; @@ -193,8 +197,135 @@ &r_rsb { status = "okay"; + + axp809: pmic@3a3 { + reg = <0x3a3>; + interrupt-parent = <&nmi_intc>; + interrupts = <0 IRQ_TYPE_LEVEL_LOW>; + + regulators { + reg_aldo1: aldo1 { + /* + * TODO: This should be handled by the + * USB PHY driver. + */ + regulator-always-on; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-name = "vcc33-usbh"; + }; + + reg_aldo2: aldo2 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-name = "vcc-pb-io-cam"; + }; + + aldo3 { + /* unused */ + }; + + reg_dc5ldo: dc5ldo { + regulator-always-on; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1100000>; + regulator-name = "vdd-cpus-09-usbh"; + }; + + reg_dcdc1: dcdc1 { + regulator-always-on; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-name = "vcc-3v"; + }; + + reg_dcdc2: dcdc2 { + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1100000>; + regulator-name = "vdd-gpu"; + }; + + reg_dcdc3: dcdc3 { + regulator-always-on; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1100000>; + regulator-name = "vdd-cpua"; + }; + + reg_dcdc4: dcdc4 { + regulator-always-on; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1100000>; + regulator-name = "vdd-sys-usb0-hdmi"; + }; + + reg_dcdc5: dcdc5 { + regulator-always-on; + regulator-min-microvolt = <1425000>; + regulator-max-microvolt = <1575000>; + regulator-name = "vcc-dram"; + }; + + reg_dldo1: dldo1 { + /* + * The WiFi chip supports a wide range + * (3.0 ~ 4.8V) of voltages, and so does + * this regulator (3.0 ~ 4.2V), but + * Allwinner SDK always sets it to 3.3V. + */ + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc-wifi"; + }; + + reg_dldo2: dldo2 { + regulator-always-on; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-name = "vcc-pl"; + }; + + reg_eldo1: eldo1 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-name = "vcc-dvdd-cam"; + }; + + reg_eldo2: eldo2 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-name = "vcc-pe"; + }; + + reg_eldo3: eldo3 { + regulator-always-on; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-name = "vcc-pm-codec-io1"; + }; + + reg_ldo_io0: ldo_io0 { + regulator-always-on; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-name = "vcc-pg"; + }; + + reg_ldo_io1: ldo_io1 { + regulator-min-microvolt = <2500000>; + regulator-max-microvolt = <2500000>; + regulator-name = "vcc-pa-gmac-2v5"; + }; + + reg_rtc_ldo: rtc_ldo { + regulator-name = "vcc-rtc-vdd1v8-io"; + }; + }; + }; }; +#include "axp809.dtsi" + &uart0 { pinctrl-names = "default"; pinctrl-0 = <&uart0_pins_a>; diff --git a/arch/arm/boot/dts/sunxi-reference-design-tablet.dtsi b/arch/arm/boot/dts/sunxi-reference-design-tablet.dtsi new file mode 100644 index 000000000..b8241462f --- /dev/null +++ b/arch/arm/boot/dts/sunxi-reference-design-tablet.dtsi @@ -0,0 +1,83 @@ +/* + * Copyright 2015 Hans de Goede <hdegoede@redhat.com> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> +#include <dt-bindings/pinctrl/sun4i-a10.h> +#include "sunxi-common-regulators.dtsi" + +&i2c0 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins_a>; + status = "okay"; +}; + +&i2c1 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_pins_a>; + status = "okay"; +}; + +&lradc { + vref-supply = <®_vcc3v0>; + status = "okay"; + + button@200 { + label = "Volume Up"; + linux,code = <KEY_VOLUMEUP>; + channel = <0>; + voltage = <200000>; + }; + + button@400 { + label = "Volume Down"; + linux,code = <KEY_VOLUMEDOWN>; + channel = <0>; + voltage = <400000>; + }; +}; + +&pwm { + pinctrl-names = "default"; + pinctrl-0 = <&pwm0_pins>; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/tegra114-dalmore.dts b/arch/arm/boot/dts/tegra114-dalmore.dts index c970bf65c..1444fbd54 100644 --- a/arch/arm/boot/dts/tegra114-dalmore.dts +++ b/arch/arm/boot/dts/tegra114-dalmore.dts @@ -897,7 +897,7 @@ palmas: tps65913@58 { compatible = "ti,palmas"; reg = <0x58>; - interrupts = <0 86 IRQ_TYPE_LEVEL_LOW>; + interrupts = <0 86 IRQ_TYPE_LEVEL_HIGH>; #interrupt-cells = <2>; interrupt-controller; @@ -1149,7 +1149,7 @@ clk32k_in: clock@0 { compatible = "fixed-clock"; - reg=<0>; + reg = <0>; #clock-cells = <0>; clock-frequency = <32768>; }; diff --git a/arch/arm/boot/dts/tegra114-roth.dts b/arch/arm/boot/dts/tegra114-roth.dts index 9d868af97..966a7fc04 100644 --- a/arch/arm/boot/dts/tegra114-roth.dts +++ b/arch/arm/boot/dts/tegra114-roth.dts @@ -802,7 +802,7 @@ palmas: pmic@58 { compatible = "ti,palmas"; reg = <0x58>; - interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_LOW>; + interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>; #interrupt-cells = <2>; interrupt-controller; @@ -1020,9 +1020,9 @@ #address-cells = <1>; #size-cells = <0>; - clk32k_in: clock { + clk32k_in: clock@0 { compatible = "fixed-clock"; - reg=<0>; + reg = <0>; #clock-cells = <0>; clock-frequency = <32768>; }; diff --git a/arch/arm/boot/dts/tegra114-tn7.dts b/arch/arm/boot/dts/tegra114-tn7.dts index 89047edb5..a161fa1df 100644 --- a/arch/arm/boot/dts/tegra114-tn7.dts +++ b/arch/arm/boot/dts/tegra114-tn7.dts @@ -63,7 +63,7 @@ palmas: pmic@58 { compatible = "ti,palmas"; reg = <0x58>; - interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_LOW>; + interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>; #interrupt-cells = <2>; interrupt-controller; @@ -277,7 +277,7 @@ #address-cells = <1>; #size-cells = <0>; - clk32k_in: clock { + clk32k_in: clock@0 { compatible = "fixed-clock"; reg = <0>; #clock-cells = <0>; diff --git a/arch/arm/boot/dts/tegra124-apalis-emc.dtsi b/arch/arm/boot/dts/tegra124-apalis-emc.dtsi new file mode 100644 index 000000000..ca2c3a557 --- /dev/null +++ b/arch/arm/boot/dts/tegra124-apalis-emc.dtsi @@ -0,0 +1,1502 @@ +/* + * Copyright 2016 Toradex AG + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This file is distributed in the hope that it will be useful + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/ { + clock@60006000 { + emc-timings-1 { + nvidia,ram-code = <1>; + + timing-12750000 { + clock-frequency = <12750000>; + nvidia,parent-clock-frequency = <408000000>; + clocks = <&tegra_car TEGRA124_CLK_PLL_P>; + clock-names = "emc-parent"; + }; + timing-20400000 { + clock-frequency = <20400000>; + nvidia,parent-clock-frequency = <408000000>; + clocks = <&tegra_car TEGRA124_CLK_PLL_P>; + clock-names = "emc-parent"; + }; + timing-40800000 { + clock-frequency = <40800000>; + nvidia,parent-clock-frequency = <408000000>; + clocks = <&tegra_car TEGRA124_CLK_PLL_P>; + clock-names = "emc-parent"; + }; + timing-68000000 { + clock-frequency = <68000000>; + nvidia,parent-clock-frequency = <408000000>; + clocks = <&tegra_car TEGRA124_CLK_PLL_P>; + clock-names = "emc-parent"; + }; + timing-102000000 { + clock-frequency = <102000000>; + nvidia,parent-clock-frequency = <408000000>; + clocks = <&tegra_car TEGRA124_CLK_PLL_P>; + clock-names = "emc-parent"; + }; + timing-204000000 { + clock-frequency = <204000000>; + nvidia,parent-clock-frequency = <408000000>; + clocks = <&tegra_car TEGRA124_CLK_PLL_P>; + clock-names = "emc-parent"; + }; + timing-300000000 { + clock-frequency = <300000000>; + nvidia,parent-clock-frequency = <600000000>; + clocks = <&tegra_car TEGRA124_CLK_PLL_C>; + clock-names = "emc-parent"; + }; + timing-396000000 { + clock-frequency = <396000000>; + nvidia,parent-clock-frequency = <792000000>; + clocks = <&tegra_car TEGRA124_CLK_PLL_M>; + clock-names = "emc-parent"; + }; + timing-528000000 { + clock-frequency = <528000000>; + nvidia,parent-clock-frequency = <528000000>; + clocks = <&tegra_car TEGRA124_CLK_PLL_M_UD>; + clock-names = "emc-parent"; + }; + timing-600000000 { + clock-frequency = <600000000>; + nvidia,parent-clock-frequency = <600000000>; + clocks = <&tegra_car TEGRA124_CLK_PLL_C_UD>; + clock-names = "emc-parent"; + }; + timing-792000000 { + clock-frequency = <792000000>; + nvidia,parent-clock-frequency = <792000000>; + clocks = <&tegra_car TEGRA124_CLK_PLL_M_UD>; + clock-names = "emc-parent"; + }; + timing-924000000 { + clock-frequency = <924000000>; + nvidia,parent-clock-frequency = <924000000>; + clocks = <&tegra_car TEGRA124_CLK_PLL_M_UD>; + clock-names = "emc-parent"; + }; + }; + }; + + emc@7001b000 { + emc-timings-1 { + nvidia,ram-code = <1>; + + timing-12750000 { + clock-frequency = <12750000>; + + nvidia,emc-auto-cal-config = <0xa1430000>; + nvidia,emc-auto-cal-config2 = <0x00000000>; + nvidia,emc-auto-cal-config3 = <0x00000000>; + nvidia,emc-auto-cal-interval = <0x001fffff>; + nvidia,emc-bgbias-ctl0 = <0x00000008>; + nvidia,emc-cfg = <0x73240000>; + nvidia,emc-cfg-2 = <0x000008c5>; + nvidia,emc-ctt-term-ctrl = <0x00000802>; + nvidia,emc-mode-1 = <0x80100003>; + nvidia,emc-mode-2 = <0x80200008>; + nvidia,emc-mode-4 = <0x00000000>; + nvidia,emc-mode-reset = <0x80001221>; + nvidia,emc-mrs-wait-cnt = <0x000e000e>; + nvidia,emc-sel-dpd-ctrl = <0x00040128>; + nvidia,emc-xm2dqspadctrl2 = <0x0130b118>; + nvidia,emc-zcal-cnt-long = <0x00000042>; + nvidia,emc-zcal-interval = <0x00000000>; + + nvidia,emc-configuration = < + 0x00000000 0x00000003 + 0x00000000 0x00000000 + 0x00000000 0x00000004 + 0x0000000a 0x00000005 + 0x0000000b 0x00000000 + 0x00000000 0x00000003 + 0x00000003 0x00000000 + 0x00000006 0x00000006 + 0x00000006 0x00000002 + 0x00000000 0x00000005 + 0x00000005 0x00010000 + 0x00000003 0x00000000 + 0x00000000 0x00000000 + 0x00000000 0x00000004 + 0x0000000c 0x0000000d + 0x0000000f 0x00000060 + 0x00000000 0x00000018 + 0x00000002 0x00000002 + 0x00000001 0x00000000 + 0x00000007 0x0000000f + 0x00000005 0x00000005 + 0x00000004 0x00000005 + 0x00000004 0x00000000 + 0x00000000 0x00000005 + 0x00000005 0x00000064 + 0x00000000 0x00000000 + 0x00000000 0x106aa298 + 0x002c00a0 0x00008000 + 0x00080000 0x00080000 + 0x00080000 0x00080000 + 0x00080000 0x00080000 + 0x00080000 0x00080000 + 0x00080000 0x00080000 + 0x00080000 0x00080000 + 0x00080000 0x00080000 + 0x00080000 0x00080000 + 0x00000000 0x00000000 + 0x00000000 0x00000000 + 0x00000000 0x00000000 + 0x00000000 0x00000000 + 0x00000000 0x00000000 + 0x00000000 0x00000000 + 0x00000000 0x00000000 + 0x00000000 0x00000000 + 0x00000000 0x00000000 + 0x00000000 0x00000000 + 0x00000000 0x00000000 + 0x00000000 0x00000000 + 0x00000000 0x00000000 + 0x00000000 0x00000000 + 0x00000000 0x00000000 + 0x00000000 0x00000000 + 0x00000000 0x00000000 + 0x00000000 0x00000000 + 0x00000000 0x00000000 + 0x000fc000 0x000fc000 + 0x000fc000 0x000fc000 + 0x0000fc00 0x0000fc00 + 0x0000fc00 0x0000fc00 + 0x10000280 0x00000000 + 0x00111111 0x00000000 + 0x00000000 0x77ffc081 + 0x00000e0e 0x81f1f108 + 0x07070004 0x0000003f + 0x016eeeee 0x51451400 + 0x00514514 0x00514514 + 0x51451400 0x0000003f + 0x00000007 0x00000000 + 0x00000042 0x000e000e + 0x00000000 0x00000003 + 0x0000f2f3 0x800001c5 + 0x0000000a + >; + }; + + timing-20400000 { + clock-frequency = <20400000>; + + nvidia,emc-auto-cal-config = <0xa1430000>; + nvidia,emc-auto-cal-config2 = <0x00000000>; + nvidia,emc-auto-cal-config3 = <0x00000000>; + nvidia,emc-auto-cal-interval = <0x001fffff>; + nvidia,emc-bgbias-ctl0 = <0x00000008>; + nvidia,emc-cfg = <0x73240000>; + nvidia,emc-cfg-2 = <0x000008c5>; + nvidia,emc-ctt-term-ctrl = <0x00000802>; + nvidia,emc-mode-1 = <0x80100003>; + nvidia,emc-mode-2 = <0x80200008>; + nvidia,emc-mode-4 = <0x00000000>; + nvidia,emc-mode-reset = <0x80001221>; + nvidia,emc-mrs-wait-cnt = <0x000e000e>; + nvidia,emc-sel-dpd-ctrl = <0x00040128>; + nvidia,emc-xm2dqspadctrl2 = <0x0130b118>; + nvidia,emc-zcal-cnt-long = <0x00000042>; + nvidia,emc-zcal-interval = <0x00000000>; + + nvidia,emc-configuration = < + 0x00000000 0x00000005 + 0x00000000 0x00000000 + 0x00000000 0x00000004 + 0x0000000a 0x00000005 + 0x0000000b 0x00000000 + 0x00000000 0x00000003 + 0x00000003 0x00000000 + 0x00000006 0x00000006 + 0x00000006 0x00000002 + 0x00000000 0x00000005 + 0x00000005 0x00010000 + 0x00000003 0x00000000 + 0x00000000 0x00000000 + 0x00000000 0x00000004 + 0x0000000c 0x0000000d + 0x0000000f 0x0000009a + 0x00000000 0x00000026 + 0x00000002 0x00000002 + 0x00000001 0x00000000 + 0x00000007 0x0000000f + 0x00000006 0x00000006 + 0x00000004 0x00000005 + 0x00000004 0x00000000 + 0x00000000 0x00000005 + 0x00000005 0x000000a0 + 0x00000000 0x00000000 + 0x00000000 0x106aa298 + 0x002c00a0 0x00008000 + 0x00080000 0x00080000 + 0x00080000 0x00080000 + 0x00080000 0x00080000 + 0x00080000 0x00080000 + 0x00080000 0x00080000 + 0x00080000 0x00080000 + 0x00080000 0x00080000 + 0x00080000 0x00080000 + 0x00000000 0x00000000 + 0x00000000 0x00000000 + 0x00000000 0x00000000 + 0x00000000 0x00000000 + 0x00000000 0x00000000 + 0x00000000 0x00000000 + 0x00000000 0x00000000 + 0x00000000 0x00000000 + 0x00000000 0x00000000 + 0x00000000 0x00000000 + 0x00000000 0x00000000 + 0x00000000 0x00000000 + 0x00000000 0x00000000 + 0x00000000 0x00000000 + 0x00000000 0x00000000 + 0x00000000 0x00000000 + 0x00000000 0x00000000 + 0x00000000 0x00000000 + 0x00000000 0x00000000 + 0x000fc000 0x000fc000 + 0x000fc000 0x000fc000 + 0x0000fc00 0x0000fc00 + 0x0000fc00 0x0000fc00 + 0x10000280 0x00000000 + 0x00111111 0x00000000 + 0x00000000 0x77ffc081 + 0x00000e0e 0x81f1f108 + 0x07070004 0x0000003f + 0x016eeeee 0x51451400 + 0x00514514 0x00514514 + 0x51451400 0x0000003f + 0x0000000b 0x00000000 + 0x00000042 0x000e000e + 0x00000000 0x00000003 + 0x0000f2f3 0x8000023a + 0x0000000a + >; + }; + + timing-40800000 { + clock-frequency = <40800000>; + + nvidia,emc-auto-cal-config = <0xa1430000>; + nvidia,emc-auto-cal-config2 = <0x00000000>; + nvidia,emc-auto-cal-config3 = <0x00000000>; + nvidia,emc-auto-cal-interval = <0x001fffff>; + nvidia,emc-bgbias-ctl0 = <0x00000008>; + nvidia,emc-cfg = <0x73240000>; + nvidia,emc-cfg-2 = <0x000008c5>; + nvidia,emc-ctt-term-ctrl = <0x00000802>; + nvidia,emc-mode-1 = <0x80100003>; + nvidia,emc-mode-2 = <0x80200008>; + nvidia,emc-mode-4 = <0x00000000>; + nvidia,emc-mode-reset = <0x80001221>; + nvidia,emc-mrs-wait-cnt = <0x000e000e>; + nvidia,emc-sel-dpd-ctrl = <0x00040128>; + nvidia,emc-xm2dqspadctrl2 = <0x0130b118>; + nvidia,emc-zcal-cnt-long = <0x00000042>; + nvidia,emc-zcal-interval = <0x00000000>; + + nvidia,emc-configuration = < + 0x00000001 0x0000000a + 0x00000000 0x00000001 + 0x00000000 0x00000004 + 0x0000000a 0x00000005 + 0x0000000b 0x00000000 + 0x00000000 0x00000003 + 0x00000003 0x00000000 + 0x00000006 0x00000006 + 0x00000006 0x00000002 + 0x00000000 0x00000005 + 0x00000005 0x00010000 + 0x00000003 0x00000000 + 0x00000000 0x00000000 + 0x00000000 0x00000004 + 0x0000000c 0x0000000d + 0x0000000f 0x00000134 + 0x00000000 0x0000004d + 0x00000002 0x00000002 + 0x00000001 0x00000000 + 0x00000008 0x0000000f + 0x0000000c 0x0000000c + 0x00000004 0x00000005 + 0x00000004 0x00000000 + 0x00000000 0x00000005 + 0x00000005 0x0000013f + 0x00000000 0x00000000 + 0x00000000 0x106aa298 + 0x002c00a0 0x00008000 + 0x00080000 0x00080000 + 0x00080000 0x00080000 + 0x00080000 0x00080000 + 0x00080000 0x00080000 + 0x00080000 0x00080000 + 0x00080000 0x00080000 + 0x00080000 0x00080000 + 0x00080000 0x00080000 + 0x00000000 0x00000000 + 0x00000000 0x00000000 + 0x00000000 0x00000000 + 0x00000000 0x00000000 + 0x00000000 0x00000000 + 0x00000000 0x00000000 + 0x00000000 0x00000000 + 0x00000000 0x00000000 + 0x00000000 0x00000000 + 0x00000000 0x00000000 + 0x00000000 0x00000000 + 0x00000000 0x00000000 + 0x00000000 0x00000000 + 0x00000000 0x00000000 + 0x00000000 0x00000000 + 0x00000000 0x00000000 + 0x00000000 0x00000000 + 0x00000000 0x00000000 + 0x00000000 0x00000000 + 0x000fc000 0x000fc000 + 0x000fc000 0x000fc000 + 0x0000fc00 0x0000fc00 + 0x0000fc00 0x0000fc00 + 0x10000280 0x00000000 + 0x00111111 0x00000000 + 0x00000000 0x77ffc081 + 0x00000e0e 0x81f1f108 + 0x07070004 0x0000003f + 0x016eeeee 0x51451400 + 0x00514514 0x00514514 + 0x51451400 0x0000003f + 0x00000015 0x00000000 + 0x00000042 0x000e000e + 0x00000000 0x00000003 + 0x0000f2f3 0x80000370 + 0x0000000a + >; + }; + + timing-68000000 { + clock-frequency = <68000000>; + + nvidia,emc-auto-cal-config = <0xa1430000>; + nvidia,emc-auto-cal-config2 = <0x00000000>; + nvidia,emc-auto-cal-config3 = <0x00000000>; + nvidia,emc-auto-cal-interval = <0x001fffff>; + nvidia,emc-bgbias-ctl0 = <0x00000008>; + nvidia,emc-cfg = <0x73240000>; + nvidia,emc-cfg-2 = <0x000008c5>; + nvidia,emc-ctt-term-ctrl = <0x00000802>; + nvidia,emc-mode-1 = <0x80100003>; + nvidia,emc-mode-2 = <0x80200008>; + nvidia,emc-mode-4 = <0x00000000>; + nvidia,emc-mode-reset = <0x80001221>; + nvidia,emc-mrs-wait-cnt = <0x000e000e>; + nvidia,emc-sel-dpd-ctrl = <0x00040128>; + nvidia,emc-xm2dqspadctrl2 = <0x0130b118>; + nvidia,emc-zcal-cnt-long = <0x00000042>; + nvidia,emc-zcal-interval = <0x00000000>; + + nvidia,emc-configuration = < + 0x00000003 0x00000011 + 0x00000000 0x00000002 + 0x00000000 0x00000004 + 0x0000000a 0x00000005 + 0x0000000b 0x00000000 + 0x00000000 0x00000003 + 0x00000003 0x00000000 + 0x00000006 0x00000006 + 0x00000006 0x00000002 + 0x00000000 0x00000005 + 0x00000005 0x00010000 + 0x00000003 0x00000000 + 0x00000000 0x00000000 + 0x00000000 0x00000004 + 0x0000000c 0x0000000d + 0x0000000f 0x00000202 + 0x00000000 0x00000080 + 0x00000002 0x00000002 + 0x00000001 0x00000000 + 0x0000000f 0x0000000f + 0x00000013 0x00000013 + 0x00000004 0x00000005 + 0x00000004 0x00000001 + 0x00000000 0x00000005 + 0x00000005 0x00000213 + 0x00000000 0x00000000 + 0x00000000 0x106aa298 + 0x002c00a0 0x00008000 + 0x00080000 0x00080000 + 0x00080000 0x00080000 + 0x00080000 0x00080000 + 0x00080000 0x00080000 + 0x00080000 0x00080000 + 0x00080000 0x00080000 + 0x00080000 0x00080000 + 0x00080000 0x00080000 + 0x00000000 0x00000000 + 0x00000000 0x00000000 + 0x00000000 0x00000000 + 0x00000000 0x00000000 + 0x00000000 0x00000000 + 0x00000000 0x00000000 + 0x00000000 0x00000000 + 0x00000000 0x00000000 + 0x00000000 0x00000000 + 0x00000000 0x00000000 + 0x00000000 0x00000000 + 0x00000000 0x00000000 + 0x00000000 0x00000000 + 0x00000000 0x00000000 + 0x00000000 0x00000000 + 0x00000000 0x00000000 + 0x00000000 0x00000000 + 0x00000000 0x00000000 + 0x00000000 0x00000000 + 0x000fc000 0x000fc000 + 0x000fc000 0x000fc000 + 0x0000fc00 0x0000fc00 + 0x0000fc00 0x0000fc00 + 0x10000280 0x00000000 + 0x00111111 0x00000000 + 0x00000000 0x77ffc081 + 0x00000e0e 0x81f1f108 + 0x07070004 0x0000003f + 0x016eeeee 0x51451400 + 0x00514514 0x00514514 + 0x51451400 0x0000003f + 0x00000022 0x00000000 + 0x00000042 0x000e000e + 0x00000000 0x00000003 + 0x0000f2f3 0x8000050e + 0x0000000a + >; + }; + + timing-102000000 { + clock-frequency = <102000000>; + + nvidia,emc-auto-cal-config = <0xa1430000>; + nvidia,emc-auto-cal-config2 = <0x00000000>; + nvidia,emc-auto-cal-config3 = <0x00000000>; + nvidia,emc-auto-cal-interval = <0x001fffff>; + nvidia,emc-bgbias-ctl0 = <0x00000008>; + nvidia,emc-cfg = <0x73240000>; + nvidia,emc-cfg-2 = <0x000008c5>; + nvidia,emc-ctt-term-ctrl = <0x00000802>; + nvidia,emc-mode-1 = <0x80100003>; + nvidia,emc-mode-2 = <0x80200008>; + nvidia,emc-mode-4 = <0x00000000>; + nvidia,emc-mode-reset = <0x80001221>; + nvidia,emc-mrs-wait-cnt = <0x000e000e>; + nvidia,emc-sel-dpd-ctrl = <0x00040128>; + nvidia,emc-xm2dqspadctrl2 = <0x0130b118>; + nvidia,emc-zcal-cnt-long = <0x00000042>; + nvidia,emc-zcal-interval = <0x00000000>; + + nvidia,emc-configuration = < + 0x00000004 0x0000001a + 0x00000000 0x00000003 + 0x00000001 0x00000004 + 0x0000000a 0x00000005 + 0x0000000b 0x00000001 + 0x00000001 0x00000003 + 0x00000003 0x00000000 + 0x00000006 0x00000006 + 0x00000006 0x00000002 + 0x00000000 0x00000005 + 0x00000005 0x00010000 + 0x00000003 0x00000000 + 0x00000000 0x00000000 + 0x00000000 0x00000004 + 0x0000000c 0x0000000d + 0x0000000f 0x00000304 + 0x00000000 0x000000c1 + 0x00000002 0x00000002 + 0x00000001 0x00000000 + 0x00000018 0x0000000f + 0x0000001c 0x0000001c + 0x00000004 0x00000005 + 0x00000004 0x00000002 + 0x00000000 0x00000005 + 0x00000005 0x0000031c + 0x00000000 0x00000000 + 0x00000000 0x106aa298 + 0x002c00a0 0x00008000 + 0x00080000 0x00080000 + 0x00080000 0x00080000 + 0x00080000 0x00080000 + 0x00080000 0x00080000 + 0x00080000 0x00080000 + 0x00080000 0x00080000 + 0x00080000 0x00080000 + 0x00080000 0x00080000 + 0x00000000 0x00000000 + 0x00000000 0x00000000 + 0x00000000 0x00000000 + 0x00000000 0x00000000 + 0x00000000 0x00000000 + 0x00000000 0x00000000 + 0x00000000 0x00000000 + 0x00000000 0x00000000 + 0x00000000 0x00000000 + 0x00000000 0x00000000 + 0x00000000 0x00000000 + 0x00000000 0x00000000 + 0x00000000 0x00000000 + 0x00000000 0x00000000 + 0x00000000 0x00000000 + 0x00000000 0x00000000 + 0x00000000 0x00000000 + 0x00000000 0x00000000 + 0x00000000 0x00000000 + 0x000fc000 0x000fc000 + 0x000fc000 0x000fc000 + 0x0000fc00 0x0000fc00 + 0x0000fc00 0x0000fc00 + 0x10000280 0x00000000 + 0x00111111 0x00000000 + 0x00000000 0x77ffc081 + 0x00000e0e 0x81f1f108 + 0x07070004 0x0000003f + 0x016eeeee 0x51451400 + 0x00514514 0x00514514 + 0x51451400 0x0000003f + 0x00000033 0x00000000 + 0x00000042 0x000e000e + 0x00000000 0x00000003 + 0x0000f2f3 0x80000713 + 0x0000000a + >; + }; + + timing-204000000 { + clock-frequency = <204000000>; + + nvidia,emc-auto-cal-config = <0xa1430000>; + nvidia,emc-auto-cal-config2 = <0x00000000>; + nvidia,emc-auto-cal-config3 = <0x00000000>; + nvidia,emc-auto-cal-interval = <0x001fffff>; + nvidia,emc-bgbias-ctl0 = <0x00000008>; + nvidia,emc-cfg = <0x73240000>; + nvidia,emc-cfg-2 = <0x000008cd>; + nvidia,emc-ctt-term-ctrl = <0x00000802>; + nvidia,emc-mode-1 = <0x80100003>; + nvidia,emc-mode-2 = <0x80200008>; + nvidia,emc-mode-4 = <0x00000000>; + nvidia,emc-mode-reset = <0x80001221>; + nvidia,emc-mrs-wait-cnt = <0x000e000e>; + nvidia,emc-sel-dpd-ctrl = <0x00040128>; + nvidia,emc-xm2dqspadctrl2 = <0x0130b118>; + nvidia,emc-zcal-cnt-long = <0x00000042>; + nvidia,emc-zcal-interval = <0x00020000>; + + nvidia,emc-configuration = < + 0x00000009 0x00000035 + 0x00000000 0x00000006 + 0x00000002 0x00000005 + 0x0000000a 0x00000005 + 0x0000000b 0x00000002 + 0x00000002 0x00000003 + 0x00000003 0x00000000 + 0x00000005 0x00000005 + 0x00000006 0x00000002 + 0x00000000 0x00000004 + 0x00000006 0x00010000 + 0x00000003 0x00000000 + 0x00000000 0x00000000 + 0x00000000 0x00000003 + 0x0000000d 0x0000000f + 0x00000011 0x00000607 + 0x00000000 0x00000181 + 0x00000002 0x00000002 + 0x00000001 0x00000000 + 0x00000032 0x0000000f + 0x00000038 0x00000038 + 0x00000004 0x00000005 + 0x00000004 0x00000006 + 0x00000000 0x00000005 + 0x00000005 0x00000638 + 0x00000000 0x00000000 + 0x00000000 0x106aa298 + 0x002c00a0 0x00008000 + 0x00080000 0x00080000 + 0x00080000 0x00080000 + 0x00080000 0x00080000 + 0x00080000 0x00080000 + 0x00080000 0x00080000 + 0x00080000 0x00080000 + 0x00080000 0x00080000 + 0x00080000 0x00080000 + 0x00000000 0x00000000 + 0x00000000 0x00000000 + 0x00000000 0x00000000 + 0x00000000 0x00000000 + 0x00000000 0x00000000 + 0x00008000 0x00000000 + 0x00000000 0x00008000 + 0x00000000 0x00000000 + 0x00000000 0x00000000 + 0x00000000 0x00000000 + 0x00000000 0x00000000 + 0x00000000 0x00000000 + 0x00000000 0x00000000 + 0x00000000 0x00000000 + 0x00000000 0x00000000 + 0x00000000 0x00000000 + 0x00000000 0x00000000 + 0x00000000 0x00000000 + 0x00000000 0x00000000 + 0x00090000 0x00090000 + 0x00090000 0x00090000 + 0x00009000 0x00009000 + 0x00009000 0x00009000 + 0x10000280 0x00000000 + 0x00111111 0x00000000 + 0x00000000 0x77ffc081 + 0x00000707 0x81f1f108 + 0x07070004 0x0000003f + 0x016eeeee 0x51451400 + 0x00514514 0x00514514 + 0x51451400 0x0000003f + 0x00000066 0x00000000 + 0x00000100 0x000e000e + 0x00000000 0x00000003 + 0x0000d2b3 0x80000d22 + 0x0000000a + >; + }; + + timing-300000000 { + clock-frequency = <300000000>; + + nvidia,emc-auto-cal-config = <0xa1430000>; + nvidia,emc-auto-cal-config2 = <0x00000000>; + nvidia,emc-auto-cal-config3 = <0x00000000>; + nvidia,emc-auto-cal-interval = <0x001fffff>; + nvidia,emc-bgbias-ctl0 = <0x00000000>; + nvidia,emc-cfg = <0x73340000>; + nvidia,emc-cfg-2 = <0x000008d5>; + nvidia,emc-ctt-term-ctrl = <0x00000802>; + nvidia,emc-mode-1 = <0x80100002>; + nvidia,emc-mode-2 = <0x80200000>; + nvidia,emc-mode-4 = <0x00000000>; + nvidia,emc-mode-reset = <0x80000321>; + nvidia,emc-mrs-wait-cnt = <0x0173000e>; + nvidia,emc-sel-dpd-ctrl = <0x00040128>; + nvidia,emc-xm2dqspadctrl2 = <0x01231339>; + nvidia,emc-zcal-cnt-long = <0x00000042>; + nvidia,emc-zcal-interval = <0x00020000>; + + nvidia,emc-configuration = < + 0x0000000d 0x0000004d + 0x00000000 0x00000009 + 0x00000003 0x00000004 + 0x00000008 0x00000002 + 0x00000009 0x00000003 + 0x00000003 0x00000002 + 0x00000002 0x00000000 + 0x00000003 0x00000003 + 0x00000005 0x00000002 + 0x00000000 0x00000002 + 0x00000007 0x00020000 + 0x00000003 0x00000000 + 0x00000000 0x00000000 + 0x00000000 0x00000001 + 0x0000000e 0x00000010 + 0x00000012 0x000008e4 + 0x00000000 0x00000239 + 0x00000001 0x00000008 + 0x00000001 0x00000000 + 0x0000004b 0x0000000e + 0x00000052 0x00000200 + 0x00000004 0x00000005 + 0x00000004 0x00000008 + 0x00000000 0x00000005 + 0x00000005 0x00000924 + 0x00000000 0x00000000 + 0x00000000 0x104ab098 + 0x002c00a0 0x00008000 + 0x00030000 0x00030000 + 0x00030000 0x00030000 + 0x00030000 0x00030000 + 0x00030000 0x00030000 + 0x00030000 0x00030000 + 0x00030000 0x00030000 + 0x00030000 0x00030000 + 0x00030000 0x00030000 + 0x00000000 0x00000000 + 0x00000000 0x00000000 + 0x00000000 0x00000000 + 0x00000000 0x00000000 + 0x00098000 0x00098000 + 0x00000000 0x00098000 + 0x00098000 0x00000000 + 0x00000000 0x00000000 + 0x00000000 0x00000000 + 0x00000000 0x00000000 + 0x00000000 0x00000000 + 0x00000000 0x00000000 + 0x00000000 0x00000000 + 0x00000000 0x00000000 + 0x00000000 0x00000000 + 0x00000000 0x00000000 + 0x00000000 0x00000000 + 0x00000000 0x00000000 + 0x00000000 0x00000000 + 0x00050000 0x00050000 + 0x00050000 0x00050000 + 0x00005000 0x00005000 + 0x00005000 0x00005000 + 0x10000280 0x00000000 + 0x00111111 0x00000000 + 0x00000000 0x77ffc081 + 0x00000505 0x81f1f108 + 0x07070004 0x00000000 + 0x016eeeee 0x51451420 + 0x00514514 0x00514514 + 0x51451400 0x0000003f + 0x00000096 0x00000000 + 0x00000100 0x0173000e + 0x00000000 0x00000003 + 0x000052a3 0x800012d7 + 0x00000009 + >; + }; + + timing-396000000 { + clock-frequency = <396000000>; + + nvidia,emc-auto-cal-config = <0xa1430000>; + nvidia,emc-auto-cal-config2 = <0x00000000>; + nvidia,emc-auto-cal-config3 = <0x00000000>; + nvidia,emc-auto-cal-interval = <0x001fffff>; + nvidia,emc-bgbias-ctl0 = <0x00000000>; + nvidia,emc-cfg = <0x73340000>; + nvidia,emc-cfg-2 = <0x00000895>; + nvidia,emc-ctt-term-ctrl = <0x00000802>; + nvidia,emc-mode-1 = <0x80100002>; + nvidia,emc-mode-2 = <0x80200000>; + nvidia,emc-mode-4 = <0x00000000>; + nvidia,emc-mode-reset = <0x80000521>; + nvidia,emc-mrs-wait-cnt = <0x015b000e>; + nvidia,emc-sel-dpd-ctrl = <0x00040008>; + nvidia,emc-xm2dqspadctrl2 = <0x01231339>; + nvidia,emc-zcal-cnt-long = <0x00000042>; + nvidia,emc-zcal-interval = <0x00020000>; + + nvidia,emc-configuration = < + 0x00000011 0x00000066 + 0x00000000 0x0000000c + 0x00000004 0x00000004 + 0x00000008 0x00000002 + 0x0000000a 0x00000004 + 0x00000004 0x00000002 + 0x00000002 0x00000000 + 0x00000003 0x00000003 + 0x00000005 0x00000002 + 0x00000000 0x00000001 + 0x00000008 0x00020000 + 0x00000003 0x00000000 + 0x00000000 0x00000000 + 0x00000000 0x00000000 + 0x0000000f 0x00000010 + 0x00000012 0x00000bd1 + 0x00000000 0x000002f4 + 0x00000001 0x00000008 + 0x00000001 0x00000000 + 0x00000063 0x0000000f + 0x0000006c 0x00000200 + 0x00000004 0x00000005 + 0x00000004 0x0000000b + 0x00000000 0x00000005 + 0x00000005 0x00000c11 + 0x00000000 0x00000000 + 0x00000000 0x104ab098 + 0x002c00a0 0x00008000 + 0x00030000 0x00030000 + 0x00030000 0x00030000 + 0x00030000 0x00030000 + 0x00030000 0x00030000 + 0x00030000 0x00030000 + 0x00030000 0x00030000 + 0x00030000 0x00030000 + 0x00030000 0x00030000 + 0x00000000 0x00000000 + 0x00000000 0x00000000 + 0x00000000 0x00000000 + 0x00000000 0x00000000 + 0x00070000 0x00070000 + 0x00000000 0x00070000 + 0x00070000 0x00000000 + 0x00000000 0x00000000 + 0x00000000 0x00000000 + 0x00000000 0x00000000 + 0x00000000 0x00000000 + 0x00000000 0x00000000 + 0x00000000 0x00000000 + 0x00000000 0x00000000 + 0x00000000 0x00000000 + 0x00000000 0x00000000 + 0x00000000 0x00000000 + 0x00000000 0x00000000 + 0x00000000 0x00000000 + 0x00038000 0x00038000 + 0x00038000 0x00038000 + 0x00003800 0x00003800 + 0x00003800 0x00003800 + 0x10000280 0x00000000 + 0x00111111 0x00000000 + 0x00000000 0x77ffc081 + 0x00000505 0x81f1f108 + 0x07070004 0x00000000 + 0x016eeeee 0x51451420 + 0x00514514 0x00514514 + 0x51451400 0x0000003f + 0x000000c6 0x00000000 + 0x00000100 0x015b000e + 0x00000000 0x00000003 + 0x000052a3 0x8000188b + 0x00000009 + >; + }; + + timing-528000000 { + clock-frequency = <528000000>; + + nvidia,emc-auto-cal-config = <0xa1430000>; + nvidia,emc-auto-cal-config2 = <0x00000000>; + nvidia,emc-auto-cal-config3 = <0x00000000>; + nvidia,emc-auto-cal-interval = <0x001fffff>; + nvidia,emc-bgbias-ctl0 = <0x00000000>; + nvidia,emc-cfg = <0x73300000>; + nvidia,emc-cfg-2 = <0x0000089d>; + nvidia,emc-ctt-term-ctrl = <0x00000802>; + nvidia,emc-mode-1 = <0x80100002>; + nvidia,emc-mode-2 = <0x80200008>; + nvidia,emc-mode-4 = <0x00000000>; + nvidia,emc-mode-reset = <0x80000941>; + nvidia,emc-mrs-wait-cnt = <0x0139000e>; + nvidia,emc-sel-dpd-ctrl = <0x00040008>; + nvidia,emc-xm2dqspadctrl2 = <0x0123133d>; + nvidia,emc-zcal-cnt-long = <0x00000042>; + nvidia,emc-zcal-interval = <0x00020000>; + + nvidia,emc-configuration = < + 0x00000018 0x00000088 + 0x00000000 0x00000010 + 0x00000006 0x00000006 + 0x00000009 0x00000002 + 0x0000000d 0x00000006 + 0x00000006 0x00000002 + 0x00000002 0x00000000 + 0x00000003 0x00000003 + 0x00000006 0x00000002 + 0x00000000 0x00000001 + 0x00000009 0x00030000 + 0x00000003 0x00000000 + 0x00000000 0x00000000 + 0x00000000 0x00000000 + 0x00000010 0x00000012 + 0x00000014 0x00000fd6 + 0x00000000 0x000003f5 + 0x00000002 0x0000000b + 0x00000001 0x00000000 + 0x00000085 0x00000012 + 0x00000090 0x00000200 + 0x00000004 0x00000005 + 0x00000004 0x00000010 + 0x00000000 0x00000006 + 0x00000006 0x00001017 + 0x00000000 0x00000000 + 0x00000000 0x104ab098 + 0xe01200b1 0x00008000 + 0x0000000a 0x0000000a + 0x0000000a 0x0000000a + 0x0000000a 0x0000000a + 0x0000000a 0x0000000a + 0x0000000a 0x0000000a + 0x0000000a 0x0000000a + 0x0000000a 0x0000000a + 0x0000000a 0x0000000a + 0x00000000 0x00000000 + 0x00000000 0x00000000 + 0x00000000 0x00000000 + 0x00000000 0x00000000 + 0x00054000 0x00054000 + 0x00000000 0x00054000 + 0x00054000 0x00000000 + 0x00000000 0x00000000 + 0x00000000 0x00000000 + 0x00000000 0x00000000 + 0x00000000 0x00000000 + 0x00000000 0x00000000 + 0x00000000 0x00000000 + 0x00000000 0x00000000 + 0x00000000 0x00000000 + 0x00000000 0x00000000 + 0x00000000 0x00000000 + 0x00000000 0x00000000 + 0x00000000 0x00000000 + 0x0000000c 0x0000000c + 0x0000000c 0x0000000c + 0x0000000c 0x0000000c + 0x0000000c 0x0000000c + 0x100002a0 0x00000000 + 0x00111111 0x00000000 + 0x00000000 0x77ffc085 + 0x00000505 0x81f1f108 + 0x07070004 0x00000000 + 0x016eeeee 0x51451420 + 0x00514514 0x00514514 + 0x51451400 0x0606003f + 0x00000000 0x00000000 + 0x00000100 0x0139000e + 0x00000000 0x00000003 + 0x000042a0 0x80002062 + 0x0000000a + >; + }; + + timing-600000000 { + clock-frequency = <600000000>; + + nvidia,emc-auto-cal-config = <0xa1430000>; + nvidia,emc-auto-cal-config2 = <0x00000000>; + nvidia,emc-auto-cal-config3 = <0x00000000>; + nvidia,emc-auto-cal-interval = <0x001fffff>; + nvidia,emc-bgbias-ctl0 = <0x00000000>; + nvidia,emc-cfg = <0x73300000>; + nvidia,emc-cfg-2 = <0x0000089d>; + nvidia,emc-ctt-term-ctrl = <0x00000802>; + nvidia,emc-mode-1 = <0x80100002>; + nvidia,emc-mode-2 = <0x80200010>; + nvidia,emc-mode-4 = <0x00000000>; + nvidia,emc-mode-reset = <0x80000b61>; + nvidia,emc-mrs-wait-cnt = <0x0127000e>; + nvidia,emc-sel-dpd-ctrl = <0x00040008>; + nvidia,emc-xm2dqspadctrl2 = <0x0121113d>; + nvidia,emc-zcal-cnt-long = <0x00000042>; + nvidia,emc-zcal-interval = <0x00020000>; + + nvidia,emc-configuration = < + 0x0000001b 0x0000009b + 0x00000000 0x00000013 + 0x00000007 0x00000007 + 0x0000000b 0x00000003 + 0x00000010 0x00000007 + 0x00000007 0x00000002 + 0x00000002 0x00000000 + 0x00000005 0x00000005 + 0x0000000a 0x00000002 + 0x00000000 0x00000003 + 0x0000000b 0x00070000 + 0x00000003 0x00000000 + 0x00000000 0x00000000 + 0x00000000 0x00000002 + 0x00000012 0x00000016 + 0x00000018 0x00001208 + 0x00000000 0x00000482 + 0x00000002 0x0000000d + 0x00000001 0x00000000 + 0x00000097 0x00000015 + 0x000000a3 0x00000200 + 0x00000004 0x00000005 + 0x00000004 0x00000013 + 0x00000000 0x00000006 + 0x00000006 0x00001248 + 0x00000000 0x00000000 + 0x00000000 0x104ab098 + 0xe00e00b1 0x00008000 + 0x0000000a 0x0000000a + 0x0000000a 0x0000000a + 0x0000000a 0x0000000a + 0x0000000a 0x0000000a + 0x0000000a 0x0000000a + 0x0000000a 0x0000000a + 0x0000000a 0x0000000a + 0x0000000a 0x0000000a + 0x00000000 0x00000000 + 0x00000000 0x00000000 + 0x00000000 0x00000000 + 0x00000000 0x00000000 + 0x00048000 0x00048000 + 0x00000000 0x00048000 + 0x00048000 0x00000000 + 0x00000000 0x00000000 + 0x00000000 0x00000000 + 0x00000000 0x00000000 + 0x00000000 0x00000000 + 0x00000000 0x00000000 + 0x00000000 0x00000000 + 0x00000000 0x00000000 + 0x00000000 0x00000000 + 0x00000000 0x00000000 + 0x00000000 0x00000000 + 0x00000000 0x00000000 + 0x00000000 0x00000000 + 0x0000000d 0x0000000d + 0x0000000d 0x0000000d + 0x0000000d 0x0000000d + 0x0000000d 0x0000000d + 0x100002a0 0x00000000 + 0x00111111 0x00000000 + 0x00000000 0x77ffc085 + 0x00000505 0x81f1f108 + 0x07070004 0x00000000 + 0x016eeeee 0x51451420 + 0x00514514 0x00514514 + 0x51451400 0x0606003f + 0x00000000 0x00000000 + 0x00000100 0x0127000e + 0x00000000 0x00000003 + 0x000040a0 0x800024aa + 0x0000000e + >; + }; + + timing-792000000 { + clock-frequency = <792000000>; + + nvidia,emc-auto-cal-config = <0xa1430000>; + nvidia,emc-auto-cal-config2 = <0x00000000>; + nvidia,emc-auto-cal-config3 = <0x00000000>; + nvidia,emc-auto-cal-interval = <0x001fffff>; + nvidia,emc-bgbias-ctl0 = <0x00000000>; + nvidia,emc-cfg = <0x73300000>; + nvidia,emc-cfg-2 = <0x0000089d>; + nvidia,emc-ctt-term-ctrl = <0x00000802>; + nvidia,emc-mode-1 = <0x80100002>; + nvidia,emc-mode-2 = <0x80200018>; + nvidia,emc-mode-4 = <0x00000000>; + nvidia,emc-mode-reset = <0x80000d71>; + nvidia,emc-mrs-wait-cnt = <0x00f7000e>; + nvidia,emc-sel-dpd-ctrl = <0x00040000>; + nvidia,emc-xm2dqspadctrl2 = <0x0120113d>; + nvidia,emc-zcal-cnt-long = <0x00000042>; + nvidia,emc-zcal-interval = <0x00020000>; + + nvidia,emc-configuration = < + 0x00000024 0x000000cd + 0x00000000 0x00000019 + 0x0000000a 0x00000008 + 0x0000000d 0x00000004 + 0x00000013 0x0000000a + 0x0000000a 0x00000004 + 0x00000002 0x00000000 + 0x00000006 0x00000006 + 0x0000000b 0x00000002 + 0x00000000 0x00000002 + 0x0000000d 0x00080000 + 0x00000004 0x00000000 + 0x00000000 0x00000000 + 0x00000000 0x00000001 + 0x00000014 0x00000018 + 0x0000001a 0x000017e2 + 0x00000000 0x000005f8 + 0x00000003 0x00000011 + 0x00000001 0x00000000 + 0x000000c7 0x00000018 + 0x000000d7 0x00000200 + 0x00000005 0x00000006 + 0x00000005 0x00000019 + 0x00000000 0x00000008 + 0x00000008 0x00001822 + 0x00000000 0x00000000 + 0x00000000 0x104ab098 + 0xe00700b1 0x00008000 + 0x007fc008 0x007fc008 + 0x007fc008 0x007fc008 + 0x007fc008 0x007fc008 + 0x007fc008 0x007fc008 + 0x007fc008 0x007fc008 + 0x007fc008 0x007fc008 + 0x007fc008 0x007fc008 + 0x007fc008 0x007fc008 + 0x00000000 0x00000000 + 0x00000000 0x00000000 + 0x00000000 0x00000000 + 0x00000000 0x00000000 + 0x00034000 0x00034000 + 0x00000000 0x00034000 + 0x00034000 0x00000000 + 0x00000000 0x00000000 + 0x00000000 0x00000000 + 0x00000000 0x00000000 + 0x00000000 0x00000000 + 0x00000005 0x00000005 + 0x00000005 0x00000005 + 0x00000005 0x00000005 + 0x00000005 0x00000005 + 0x00000005 0x00000005 + 0x00000005 0x00000005 + 0x00000005 0x00000005 + 0x00000005 0x00000005 + 0x0000000a 0x0000000a + 0x0000000a 0x0000000a + 0x0000000a 0x0000000a + 0x0000000a 0x0000000a + 0x100002a0 0x00000000 + 0x00111111 0x00000000 + 0x00000000 0x77ffc085 + 0x00000000 0x81f1f108 + 0x07070004 0x00000000 + 0x016eeeee 0x61861820 + 0x00514514 0x00514514 + 0x61861800 0x0606003f + 0x00000000 0x00000000 + 0x00000100 0x00f7000e + 0x00000000 0x00000004 + 0x00004080 0x80003012 + 0x0000000f + >; + }; + + timing-924000000 { + clock-frequency = <924000000>; + + nvidia,emc-auto-cal-config = <0xa1430303>; + nvidia,emc-auto-cal-config2 = <0x00000000>; + nvidia,emc-auto-cal-config3 = <0x00000000>; + nvidia,emc-auto-cal-interval = <0x001fffff>; + nvidia,emc-bgbias-ctl0 = <0x00000000>; + nvidia,emc-cfg = <0x73300000>; + nvidia,emc-cfg-2 = <0x0000089d>; + nvidia,emc-ctt-term-ctrl = <0x00000802>; + nvidia,emc-mode-1 = <0x80100002>; + nvidia,emc-mode-2 = <0x80200020>; + nvidia,emc-mode-4 = <0x00000000>; + nvidia,emc-mode-reset = <0x80000f15>; + nvidia,emc-mrs-wait-cnt = <0x00cd000e>; + nvidia,emc-sel-dpd-ctrl = <0x00040000>; + nvidia,emc-xm2dqspadctrl2 = <0x0120113d>; + nvidia,emc-zcal-cnt-long = <0x0000004c>; + nvidia,emc-zcal-interval = <0x00020000>; + + nvidia,emc-configuration = < + 0x0000002b 0x000000f0 + 0x00000000 0x0000001e + 0x0000000b 0x00000009 + 0x0000000f 0x00000005 + 0x00000016 0x0000000b + 0x0000000b 0x00000004 + 0x00000002 0x00000000 + 0x00000007 0x00000007 + 0x0000000d 0x00000002 + 0x00000000 0x00000002 + 0x0000000f 0x000a0000 + 0x00000004 0x00000000 + 0x00000000 0x00000000 + 0x00000000 0x00000001 + 0x00000016 0x0000001a + 0x0000001c 0x00001be7 + 0x00000000 0x000006f9 + 0x00000004 0x00000015 + 0x00000001 0x00000000 + 0x000000e7 0x0000001b + 0x000000fb 0x00000200 + 0x00000006 0x00000007 + 0x00000006 0x0000001e + 0x00000000 0x0000000a + 0x0000000a 0x00001c28 + 0x00000000 0x00000000 + 0x00000000 0x104ab898 + 0xe00400b1 0x00008000 + 0x007f800a 0x007f800a + 0x007f800a 0x007f800a + 0x007f800a 0x007f800a + 0x007f800a 0x007f800a + 0x007f800a 0x007f800a + 0x007f800a 0x007f800a + 0x007f800a 0x007f800a + 0x007f800a 0x007f800a + 0x00000000 0x00000000 + 0x00000000 0x00000000 + 0x00000000 0x00000000 + 0x00000000 0x00000000 + 0x0002c000 0x0002c000 + 0x00000000 0x0002c000 + 0x0002c000 0x00000000 + 0x00000000 0x00000000 + 0x00000000 0x00000000 + 0x00000000 0x00000000 + 0x00000000 0x00000000 + 0x00000004 0x00000004 + 0x00000004 0x00000004 + 0x00000004 0x00000004 + 0x00000004 0x00000004 + 0x00000004 0x00000004 + 0x00000004 0x00000004 + 0x00000004 0x00000004 + 0x00000004 0x00000004 + 0x00000008 0x00000008 + 0x00000008 0x00000008 + 0x00000008 0x00000008 + 0x00000008 0x00000008 + 0x100002a0 0x00000000 + 0x00111111 0x00000000 + 0x00000000 0x77ffc085 + 0x00000000 0x81f1f108 + 0x07070004 0x00000000 + 0x016eeeee 0x5d75d720 + 0x00514514 0x00514514 + 0x5d75d700 0x0606003f + 0x00000000 0x00000000 + 0x00000128 0x00cd000e + 0x00000000 0x00000004 + 0x00004080 0x800037ea + 0x00000011 + >; + }; + + }; + }; + + memory-controller@70019000 { + emc-timings-1 { + nvidia,ram-code = <1>; + + timing-12750000 { + clock-frequency = <12750000>; + + nvidia,emem-configuration = < + 0x40040001 0x8000000a + 0x00000001 0x00000001 + 0x00000002 0x00000000 + 0x00000002 0x00000001 + 0x00000003 0x00000008 + 0x00000003 0x00000002 + 0x00000003 0x00000006 + 0x06030203 0x000a0502 + 0x77e30303 0x70000f03 + 0x001f0000 + >; + }; + + timing-20400000 { + clock-frequency = <20400000>; + + nvidia,emem-configuration = < + 0x40020001 0x80000012 + 0x00000001 0x00000001 + 0x00000002 0x00000000 + 0x00000002 0x00000001 + 0x00000003 0x00000008 + 0x00000003 0x00000002 + 0x00000003 0x00000006 + 0x06030203 0x000a0502 + 0x76230303 0x70000f03 + 0x001f0000 + >; + }; + + timing-40800000 { + clock-frequency = <40800000>; + + nvidia,emem-configuration = < + 0xa0000001 0x80000017 + 0x00000001 0x00000001 + 0x00000002 0x00000000 + 0x00000002 0x00000001 + 0x00000003 0x00000008 + 0x00000003 0x00000002 + 0x00000003 0x00000006 + 0x06030203 0x000a0502 + 0x74a30303 0x70000f03 + 0x001f0000 + >; + }; + + timing-68000000 { + clock-frequency = <68000000>; + + nvidia,emem-configuration = < + 0x00000001 0x8000001e + 0x00000001 0x00000001 + 0x00000002 0x00000000 + 0x00000002 0x00000001 + 0x00000003 0x00000008 + 0x00000003 0x00000002 + 0x00000003 0x00000006 + 0x06030203 0x000a0502 + 0x74230403 0x70000f03 + 0x001f0000 + >; + }; + + timing-102000000 { + clock-frequency = <102000000>; + + nvidia,emem-configuration = < + 0x08000001 0x80000026 + 0x00000001 0x00000001 + 0x00000003 0x00000000 + 0x00000002 0x00000001 + 0x00000003 0x00000008 + 0x00000003 0x00000002 + 0x00000003 0x00000006 + 0x06030203 0x000a0503 + 0x73c30504 0x70000f03 + 0x001f0000 + >; + }; + + timing-204000000 { + clock-frequency = <204000000>; + + nvidia,emem-configuration = < + 0x01000003 0x80000040 + 0x00000001 0x00000001 + 0x00000004 0x00000002 + 0x00000003 0x00000001 + 0x00000003 0x00000008 + 0x00000003 0x00000002 + 0x00000004 0x00000006 + 0x06040203 0x000a0504 + 0x73840a05 0x70000f03 + 0x001f0000 + >; + }; + + timing-300000000 { + clock-frequency = <300000000>; + + nvidia,emem-configuration = < + 0x08000004 0x80000040 + 0x00000001 0x00000002 + 0x00000007 0x00000004 + 0x00000004 0x00000001 + 0x00000002 0x00000007 + 0x00000002 0x00000002 + 0x00000004 0x00000006 + 0x06040202 0x000b0607 + 0x77450e08 0x70000f03 + 0x001f0000 + >; + }; + + timing-396000000 { + clock-frequency = <396000000>; + + nvidia,emem-configuration = < + 0x0f000005 0x80000040 + 0x00000001 0x00000002 + 0x00000009 0x00000005 + 0x00000006 0x00000001 + 0x00000002 0x00000008 + 0x00000002 0x00000002 + 0x00000004 0x00000006 + 0x06040202 0x000d0709 + 0x7586120a 0x70000f03 + 0x001f0000 + >; + }; + + timing-528000000 { + clock-frequency = <528000000>; + + nvidia,emem-configuration = < + 0x0f000007 0x80000040 + 0x00000002 0x00000003 + 0x0000000c 0x00000007 + 0x00000008 0x00000001 + 0x00000002 0x00000009 + 0x00000002 0x00000002 + 0x00000005 0x00000006 + 0x06050202 0x0010090c + 0x7428180d 0x70000f03 + 0x001f0000 + >; + }; + + timing-600000000 { + clock-frequency = <600000000>; + + nvidia,emem-configuration = < + 0x00000009 0x80000040 + 0x00000003 0x00000004 + 0x0000000e 0x00000009 + 0x0000000a 0x00000001 + 0x00000003 0x0000000b + 0x00000002 0x00000002 + 0x00000005 0x00000007 + 0x07050202 0x00130b0e + 0x73a91b0f 0x70000f03 + 0x001f0000 + >; + }; + + timing-792000000 { + clock-frequency = <792000000>; + + nvidia,emem-configuration = < + 0x0e00000b 0x80000040 + 0x00000004 0x00000005 + 0x00000013 0x0000000c + 0x0000000d 0x00000002 + 0x00000003 0x0000000c + 0x00000002 0x00000002 + 0x00000006 0x00000008 + 0x08060202 0x00170e13 + 0x736c2414 0x70000f02 + 0x001f0000 + >; + }; + + timing-924000000 { + clock-frequency = <924000000>; + + nvidia,emem-configuration = < + 0x0e00000d 0x80000040 + 0x00000005 0x00000006 + 0x00000016 0x0000000e + 0x0000000f 0x00000002 + 0x00000004 0x0000000e + 0x00000002 0x00000002 + 0x00000006 0x00000009 + 0x09060202 0x001a1016 + 0x734e2a17 0x70000f02 + 0x001f0000 + >; + }; + }; + }; +}; diff --git a/arch/arm/boot/dts/tegra124-apalis-eval.dts b/arch/arm/boot/dts/tegra124-apalis-eval.dts new file mode 100644 index 000000000..653044a44 --- /dev/null +++ b/arch/arm/boot/dts/tegra124-apalis-eval.dts @@ -0,0 +1,284 @@ +/* + * Copyright 2016 Toradex AG + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This file is distributed in the hope that it will be useful + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; + +#include <dt-bindings/input/input.h> +#include "tegra124-apalis.dtsi" + +/ { + model = "Toradex Apalis TK1 on Apalis Evaluation Board"; + compatible = "toradex,apalis-tk1-eval", "toradex,apalis-tk1", + "nvidia,tegra124"; + + aliases { + rtc0 = "/i2c@7000c000/rtc@68"; + rtc1 = "/i2c@7000d000/pmic@40"; + rtc2 = "/rtc@7000e000"; + serial0 = &uarta; + serial1 = &uartb; + serial2 = &uartc; + serial3 = &uartd; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + pcie-controller@01003000 { + pci@1,0 { + status = "okay"; + }; + }; + + host1x@50000000 { + hdmi@54280000 { + status = "okay"; + }; + }; + + /* Apalis UART1 */ + serial@70006000 { + status = "okay"; + }; + + /* Apalis UART2 */ + serial@70006040 { + status = "okay"; + }; + + /* Apalis UART3 */ + serial@70006200 { + status = "okay"; + }; + + /* Apalis UART4 */ + serial@70006300 { + status = "okay"; + }; + + pwm@7000a000 { + status = "okay"; + }; + + /* + * GEN1_I2C: I2C1_SDA/SCL on MXM3 pin 209/211 (e.g. RTC on carrier + * board) + */ + i2c@7000c000 { + status = "okay"; + clock-frequency = <100000>; + + pcie-switch@58 { + compatible = "plx,pex8605"; + reg = <0x58>; + }; + + /* M41T0M6 real time clock on carrier board */ + rtc@68 { + compatible = "st,m41t00"; + reg = <0x68>; + }; + }; + + /* + * GEN2_I2C: I2C2_SDA/SCL (DDC) on MXM3 pin 205/207 (e.g. display EDID) + */ + hdmi_ddc: i2c@7000c400 { + status = "okay"; + clock-frequency = <100000>; + }; + + /* + * CAM_I2C: I2C3_SDA/SCL (CAM) on MXM3 pin 201/203 (e.g. camera sensor + * on carrier board) + */ + i2c@7000c500 { + status = "okay"; + clock-frequency = <100000>; + }; + + /* I2C4 (DDC): unused */ + + /* SPI1: Apalis SPI1 */ + spi@7000d400 { + status = "okay"; + spi-max-frequency = <50000000>; + + spidev0: spidev@0 { + compatible = "spidev"; + reg = <0>; + spi-max-frequency = <50000000>; + }; + }; + + /* SPI4: Apalis SPI2 */ + spi@7000da00 { + status = "okay"; + spi-max-frequency = <50000000>; + + spidev1: spidev@0 { + compatible = "spidev"; + reg = <0>; + spi-max-frequency = <50000000>; + }; + }; + + /* Apalis Serial ATA */ + sata@70020000 { + status = "okay"; + }; + + hda@70030000 { + status = "okay"; + }; + + usb@70090000 { + status = "okay"; + }; + + /* Apalis MMC1 */ + sdhci@700b0000 { + status = "okay"; + /* MMC1_CD# */ + cd-gpios = <&gpio TEGRA_GPIO(V, 3) GPIO_ACTIVE_LOW>; + bus-width = <4>; + vqmmc-supply = <&vddio_sdmmc1>; + }; + + /* Apalis SD1 */ + sdhci@700b0400 { + status = "okay"; + /* + * Don't use SD1_CD# aka SDMMC3_CLK_LB_OUT for now as it + * features some magic properties even though the external + * loopback is disabled and the internal loopback used as per + * SDMMC_VENDOR_MISC_CNTRL_0 register's SDMMC_SPARE1 bits being + * set to 0xfffd according to the TRM! + * cd-gpios = <&gpio TEGRA_GPIO(EE, 4) GPIO_ACTIVE_LOW>; + */ + bus-width = <4>; + vqmmc-supply = <&vddio_sdmmc3>; + }; + + /* EHCI instance 0: USB1_DP/N -> USBO1_DP/N */ + usb@7d000000 { + status = "okay"; + dr_mode = "otg"; + }; + + usb-phy@7d000000 { + status = "okay"; + vbus-supply = <®_usbo1_vbus>; + }; + + /* EHCI instance 1: USB2_DP/N -> USBH2_DP/N */ + usb@7d004000 { + status = "okay"; + }; + + usb-phy@7d004000 { + status = "okay"; + vbus-supply = <®_usbh_vbus>; + }; + + /* EHCI instance 2: USB3_DP/N -> USBH4_DP/N */ + usb@7d008000 { + status = "okay"; + }; + + usb-phy@7d008000 { + status = "okay"; + vbus-supply = <®_usbh_vbus>; + }; + + backlight: backlight { + compatible = "pwm-backlight"; + + /* BKL1_PWM */ + pwms = <&pwm 3 5000000>; + brightness-levels = <255 231 223 207 191 159 127 0>; + default-brightness-level = <6>; + /* BKL1_ON */ + enable-gpios = <&gpio TEGRA_GPIO(BB, 5) GPIO_ACTIVE_HIGH>; + }; + + gpio-keys { + compatible = "gpio-keys"; + + wakeup { + label = "WAKE1_MICO"; + gpios = <&gpio TEGRA_GPIO(DD, 3) GPIO_ACTIVE_LOW>; + linux,code = <KEY_WAKEUP>; + debounce-interval = <10>; + wakeup-source; + }; + }; + + reg_5v0: regulator-5v0 { + compatible = "regulator-fixed"; + regulator-name = "5V_SW"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + }; + + /* USBO1_EN */ + reg_usbo1_vbus: regulator-usbo1-vbus { + compatible = "regulator-fixed"; + regulator-name = "VCC_USBO1"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio TEGRA_GPIO(N, 4) GPIO_ACTIVE_HIGH>; + enable-active-high; + vin-supply = <®_5v0>; + }; + + /* USBH_EN */ + reg_usbh_vbus: regulator-usbh-vbus { + compatible = "regulator-fixed"; + regulator-name = "VCC_USBH(2A|2C|2D|3|4)"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio TEGRA_GPIO(N, 5) GPIO_ACTIVE_HIGH>; + enable-active-high; + vin-supply = <®_5v0>; + }; +}; diff --git a/arch/arm/boot/dts/tegra124-apalis.dtsi b/arch/arm/boot/dts/tegra124-apalis.dtsi new file mode 100644 index 000000000..e7a73db17 --- /dev/null +++ b/arch/arm/boot/dts/tegra124-apalis.dtsi @@ -0,0 +1,2100 @@ +/* + * Copyright 2016 Toradex AG + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This file is distributed in the hope that it will be useful + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +#include "tegra124.dtsi" +#include "tegra124-apalis-emc.dtsi" + +/* + * Toradex Apalis TK1 Module Device Tree + * Compatible for Revisions 2GB: V1.0A + */ +/ { + model = "Toradex Apalis TK1"; + compatible = "toradex,apalis-tk1", "nvidia,tegra124"; + + memory { + reg = <0x0 0x80000000 0x0 0x80000000>; + }; + + pcie-controller@01003000 { + status = "okay"; + + avddio-pex-supply = <&vdd_1v05>; + avdd-pex-pll-supply = <&vdd_1v05>; + avdd-pll-erefe-supply = <&avdd_1v05>; + dvddio-pex-supply = <&vdd_1v05>; + hvdd-pex-pll-e-supply = <®_3v3>; + hvdd-pex-supply = <®_3v3>; + vddio-pex-ctl-supply = <®_3v3>; + + /* Apalis PCIe (additional lane Apalis type specific) */ + pci@1,0 { + /* PCIE1_RX/TX and TS_DIFF1/2 */ + phys = <&{/padctl@7009f000/pads/pcie/lanes/pcie-4}>, + <&{/padctl@7009f000/pads/pcie/lanes/pcie-3}>; + phy-names = "pcie-0", "pcie-1"; + }; + + /* I210 Gigabit Ethernet Controller (On-module) */ + pci@2,0 { + phys = <&{/padctl@7009f000/pads/pcie/lanes/pcie-2}>; + phy-names = "pcie-0"; + status = "okay"; + }; + }; + + host1x@50000000 { + hdmi@54280000 { + pll-supply = <®_1v05_avdd_hdmi_pll>; + vdd-supply = <®_3v3_avdd_hdmi>; + + nvidia,ddc-i2c-bus = <&hdmi_ddc>; + nvidia,hpd-gpio = + <&gpio TEGRA_GPIO(N, 7) GPIO_ACTIVE_HIGH>; + }; + }; + + gpu@0,57000000 { + /* + * Node left disabled on purpose - the bootloader will enable + * it after having set the VPR up + */ + vdd-supply = <&vdd_gpu>; + }; + + pinmux: pinmux@70000868 { + pinctrl-names = "default"; + pinctrl-0 = <&state_default>; + + state_default: pinmux { + /* Analogue Audio (On-module) */ + dap3_fs_pp0 { + nvidia,pins = "dap3_fs_pp0"; + nvidia,function = "i2s2"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + dap3_din_pp1 { + nvidia,pins = "dap3_din_pp1"; + nvidia,function = "i2s2"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + dap3_dout_pp2 { + nvidia,pins = "dap3_dout_pp2"; + nvidia,function = "i2s2"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + dap3_sclk_pp3 { + nvidia,pins = "dap3_sclk_pp3"; + nvidia,function = "i2s2"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + dap_mclk1_pw4 { + nvidia,pins = "dap_mclk1_pw4"; + nvidia,function = "extperiph1"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + + /* Apalis BKL1_ON */ + pbb5 { + nvidia,pins = "pbb5"; + nvidia,function = "vgp5"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + + /* Apalis BKL1_PWM */ + pu6 { + nvidia,pins = "pu6"; + nvidia,function = "pwm3"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + + /* Apalis CAM1_MCLK */ + cam_mclk_pcc0 { + nvidia,pins = "cam_mclk_pcc0"; + nvidia,function = "vi_alt3"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + + /* Apalis Digital Audio */ + dap2_fs_pa2 { + nvidia,pins = "dap2_fs_pa2"; + nvidia,function = "hda"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + dap2_sclk_pa3 { + nvidia,pins = "dap2_sclk_pa3"; + nvidia,function = "hda"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + dap2_din_pa4 { + nvidia,pins = "dap2_din_pa4"; + nvidia,function = "hda"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + dap2_dout_pa5 { + nvidia,pins = "dap2_dout_pa5"; + nvidia,function = "hda"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + pbb3 { /* DAP1_RESET */ + nvidia,pins = "pbb3"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + clk3_out_pee0 { + nvidia,pins = "clk3_out_pee0"; + nvidia,function = "extperiph3"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + + /* Apalis GPIO */ + ddc_scl_pv4 { + nvidia,pins = "ddc_scl_pv4"; + nvidia,function = "rsvd2"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + ddc_sda_pv5 { + nvidia,pins = "ddc_sda_pv5"; + nvidia,function = "rsvd2"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + pex_l0_rst_n_pdd1 { + nvidia,pins = "pex_l0_rst_n_pdd1"; + nvidia,function = "rsvd2"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + pex_l0_clkreq_n_pdd2 { + nvidia,pins = "pex_l0_clkreq_n_pdd2"; + nvidia,function = "rsvd2"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + pex_l1_rst_n_pdd5 { + nvidia,pins = "pex_l1_rst_n_pdd5"; + nvidia,function = "rsvd2"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + pex_l1_clkreq_n_pdd6 { + nvidia,pins = "pex_l1_clkreq_n_pdd6"; + nvidia,function = "rsvd2"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + dp_hpd_pff0 { + nvidia,pins = "dp_hpd_pff0"; + nvidia,function = "rsvd2"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + pff2 { + nvidia,pins = "pff2"; + nvidia,function = "rsvd2"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + owr { /* PEX_L1_CLKREQ_N multiplexed GPIO6 */ + nvidia,pins = "owr"; + nvidia,function = "rsvd2"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,rcv-sel = <TEGRA_PIN_DISABLE>; + }; + + /* Apalis HDMI1_CEC */ + hdmi_cec_pee3 { + nvidia,pins = "hdmi_cec_pee3"; + nvidia,function = "cec"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + + /* Apalis HDMI1_HPD */ + hdmi_int_pn7 { + nvidia,pins = "hdmi_int_pn7"; + nvidia,function = "rsvd1"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,rcv-sel = <TEGRA_PIN_DISABLE>; + }; + + /* Apalis I2C1 */ + gen1_i2c_scl_pc4 { + nvidia,pins = "gen1_i2c_scl_pc4"; + nvidia,function = "i2c1"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,open-drain = <TEGRA_PIN_ENABLE>; + }; + gen1_i2c_sda_pc5 { + nvidia,pins = "gen1_i2c_sda_pc5"; + nvidia,function = "i2c1"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,open-drain = <TEGRA_PIN_ENABLE>; + }; + + /* Apalis I2C2 (DDC) */ + gen2_i2c_scl_pt5 { + nvidia,pins = "gen2_i2c_scl_pt5"; + nvidia,function = "i2c2"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,open-drain = <TEGRA_PIN_ENABLE>; + }; + gen2_i2c_sda_pt6 { + nvidia,pins = "gen2_i2c_sda_pt6"; + nvidia,function = "i2c2"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,open-drain = <TEGRA_PIN_ENABLE>; + }; + + /* Apalis I2C3 (CAM) */ + cam_i2c_scl_pbb1 { + nvidia,pins = "cam_i2c_scl_pbb1"; + nvidia,function = "i2c3"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,open-drain = <TEGRA_PIN_ENABLE>; + }; + cam_i2c_sda_pbb2 { + nvidia,pins = "cam_i2c_sda_pbb2"; + nvidia,function = "i2c3"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,open-drain = <TEGRA_PIN_ENABLE>; + }; + + /* Apalis MMC1 */ + sdmmc1_cd_n_pv3 { /* CD# GPIO */ + nvidia,pins = "sdmmc1_wp_n_pv3"; + nvidia,function = "sdmmc1"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + clk2_out_pw5 { /* D5 GPIO */ + nvidia,pins = "clk2_out_pw5"; + nvidia,function = "rsvd2"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + sdmmc1_dat3_py4 { + nvidia,pins = "sdmmc1_dat3_py4"; + nvidia,function = "sdmmc1"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + sdmmc1_dat2_py5 { + nvidia,pins = "sdmmc1_dat2_py5"; + nvidia,function = "sdmmc1"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + sdmmc1_dat1_py6 { + nvidia,pins = "sdmmc1_dat1_py6"; + nvidia,function = "sdmmc1"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + sdmmc1_dat0_py7 { + nvidia,pins = "sdmmc1_dat0_py7"; + nvidia,function = "sdmmc1"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + sdmmc1_clk_pz0 { + nvidia,pins = "sdmmc1_clk_pz0"; + nvidia,function = "sdmmc1"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + sdmmc1_cmd_pz1 { + nvidia,pins = "sdmmc1_cmd_pz1"; + nvidia,function = "sdmmc1"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + clk2_req_pcc5 { /* D4 GPIO */ + nvidia,pins = "clk2_req_pcc5"; + nvidia,function = "rsvd2"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + /* + * Don't use MMC1_D6 aka SDMMC3_CLK_LB_IN for now as it + * features some magic properties even though the + * external loopback is disabled and the internal + * loopback used as per SDMMC_VENDOR_MISC_CNTRL_0 + * register's SDMMC_SPARE1 bits being set to 0xfffd + * according to the TRM! + */ + sdmmc3_clk_lb_in_pee5 { /* D6 GPIO */ + nvidia,pins = "sdmmc3_clk_lb_in_pee5"; + nvidia,function = "sdmmc3"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + usb_vbus_en2_pff1 { /* D7 GPIO */ + nvidia,pins = "usb_vbus_en2_pff1"; + nvidia,function = "rsvd2"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + + /* Apalis PWM */ + ph0 { + nvidia,pins = "ph0"; + nvidia,function = "pwm0"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + ph1 { + nvidia,pins = "ph1"; + nvidia,function = "pwm1"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + ph2 { + nvidia,pins = "ph2"; + nvidia,function = "pwm2"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + /* PWM3 active on pu6 being Apalis BKL1_PWM */ + ph3 { + nvidia,pins = "ph3"; + nvidia,function = "gmi"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + + /* Apalis SATA1_ACT# */ + dap1_dout_pn2 { + nvidia,pins = "dap1_dout_pn2"; + nvidia,function = "gmi"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + + /* Apalis SD1 */ + sdmmc3_clk_pa6 { + nvidia,pins = "sdmmc3_clk_pa6"; + nvidia,function = "sdmmc3"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + sdmmc3_cmd_pa7 { + nvidia,pins = "sdmmc3_cmd_pa7"; + nvidia,function = "sdmmc3"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + sdmmc3_dat3_pb4 { + nvidia,pins = "sdmmc3_dat3_pb4"; + nvidia,function = "sdmmc3"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + sdmmc3_dat2_pb5 { + nvidia,pins = "sdmmc3_dat2_pb5"; + nvidia,function = "sdmmc3"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + sdmmc3_dat1_pb6 { + nvidia,pins = "sdmmc3_dat1_pb6"; + nvidia,function = "sdmmc3"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + sdmmc3_dat0_pb7 { + nvidia,pins = "sdmmc3_dat0_pb7"; + nvidia,function = "sdmmc3"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + /* + * Don't use SD1_CD# aka SDMMC3_CLK_LB_OUT for now as it + * features some magic properties even though the + * external loopback is disabled and the internal + * loopback used as per SDMMC_VENDOR_MISC_CNTRL_0 + * register's SDMMC_SPARE1 bits being set to 0xfffd + * according to the TRM! + */ + sdmmc3_clk_lb_out_pee4 { /* CD# GPIO */ + nvidia,pins = "sdmmc3_clk_lb_out_pee4"; + nvidia,function = "rsvd2"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + + /* Apalis SPDIF */ + spdif_out_pk5 { + nvidia,pins = "spdif_out_pk5"; + nvidia,function = "spdif"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + spdif_in_pk6 { + nvidia,pins = "spdif_in_pk6"; + nvidia,function = "spdif"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + + /* Apalis SPI1 */ + ulpi_clk_py0 { + nvidia,pins = "ulpi_clk_py0"; + nvidia,function = "spi1"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + ulpi_dir_py1 { + nvidia,pins = "ulpi_dir_py1"; + nvidia,function = "spi1"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + ulpi_nxt_py2 { + nvidia,pins = "ulpi_nxt_py2"; + nvidia,function = "spi1"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + ulpi_stp_py3 { + nvidia,pins = "ulpi_stp_py3"; + nvidia,function = "spi1"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + + /* Apalis SPI2 */ + pg5 { + nvidia,pins = "pg5"; + nvidia,function = "spi4"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + pg6 { + nvidia,pins = "pg6"; + nvidia,function = "spi4"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + pg7 { + nvidia,pins = "pg7"; + nvidia,function = "spi4"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + pi3 { + nvidia,pins = "pi3"; + nvidia,function = "spi4"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + + /* Apalis UART1 */ + pb1 { /* DCD GPIO */ + nvidia,pins = "pb1"; + nvidia,function = "rsvd2"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + pk7 { /* RI GPIO */ + nvidia,pins = "pk7"; + nvidia,function = "rsvd2"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + uart1_txd_pu0 { + nvidia,pins = "pu0"; + nvidia,function = "uarta"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + uart1_rxd_pu1 { + nvidia,pins = "pu1"; + nvidia,function = "uarta"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + uart1_cts_n_pu2 { + nvidia,pins = "pu2"; + nvidia,function = "uarta"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + uart1_rts_n_pu3 { + nvidia,pins = "pu3"; + nvidia,function = "uarta"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + uart3_cts_n_pa1 { /* DSR GPIO */ + nvidia,pins = "uart3_cts_n_pa1"; + nvidia,function = "gmi"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + uart3_rts_n_pc0 { /* DTR GPIO */ + nvidia,pins = "uart3_rts_n_pc0"; + nvidia,function = "gmi"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + + /* Apalis UART2 */ + uart2_txd_pc2 { + nvidia,pins = "uart2_txd_pc2"; + nvidia,function = "irda"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + uart2_rxd_pc3 { + nvidia,pins = "uart2_rxd_pc3"; + nvidia,function = "irda"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + uart2_cts_n_pj5 { + nvidia,pins = "uart2_cts_n_pj5"; + nvidia,function = "uartb"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + uart2_rts_n_pj6 { + nvidia,pins = "uart2_rts_n_pj6"; + nvidia,function = "uartb"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + + /* Apalis UART3 */ + uart3_txd_pw6 { + nvidia,pins = "uart3_txd_pw6"; + nvidia,function = "uartc"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + uart3_rxd_pw7 { + nvidia,pins = "uart3_rxd_pw7"; + nvidia,function = "uartc"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + + /* Apalis UART4 */ + uart4_rxd_pb0 { + nvidia,pins = "pb0"; + nvidia,function = "uartd"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + uart4_txd_pj7 { + nvidia,pins = "pj7"; + nvidia,function = "uartd"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + + /* Apalis USBH_EN */ + usb_vbus_en1_pn5 { + nvidia,pins = "usb_vbus_en1_pn5"; + nvidia,function = "rsvd2"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + + /* Apalis USBH_OC# */ + pbb0 { + nvidia,pins = "pbb0"; + nvidia,function = "vgp6"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + + /* Apalis USBO1_EN */ + usb_vbus_en0_pn4 { + nvidia,pins = "usb_vbus_en0_pn4"; + nvidia,function = "rsvd2"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + + /* Apalis USBO1_OC# */ + pbb4 { + nvidia,pins = "pbb4"; + nvidia,function = "vgp4"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + + /* Apalis WAKE1_MICO */ + pex_wake_n_pdd3 { + nvidia,pins = "pex_wake_n_pdd3"; + nvidia,function = "rsvd2"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + + /* CORE_PWR_REQ */ + core_pwr_req { + nvidia,pins = "core_pwr_req"; + nvidia,function = "pwron"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + + /* CPU_PWR_REQ */ + cpu_pwr_req { + nvidia,pins = "cpu_pwr_req"; + nvidia,function = "cpu"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + + /* DVFS */ + dvfs_pwm_px0 { + nvidia,pins = "dvfs_pwm_px0"; + nvidia,function = "cldvfs"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + dvfs_clk_px2 { + nvidia,pins = "dvfs_clk_px2"; + nvidia,function = "cldvfs"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + + /* eMMC */ + sdmmc4_dat0_paa0 { + nvidia,pins = "sdmmc4_dat0_paa0"; + nvidia,function = "sdmmc4"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + sdmmc4_dat1_paa1 { + nvidia,pins = "sdmmc4_dat1_paa1"; + nvidia,function = "sdmmc4"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + sdmmc4_dat2_paa2 { + nvidia,pins = "sdmmc4_dat2_paa2"; + nvidia,function = "sdmmc4"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + sdmmc4_dat3_paa3 { + nvidia,pins = "sdmmc4_dat3_paa3"; + nvidia,function = "sdmmc4"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + sdmmc4_dat4_paa4 { + nvidia,pins = "sdmmc4_dat4_paa4"; + nvidia,function = "sdmmc4"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + sdmmc4_dat5_paa5 { + nvidia,pins = "sdmmc4_dat5_paa5"; + nvidia,function = "sdmmc4"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + sdmmc4_dat6_paa6 { + nvidia,pins = "sdmmc4_dat6_paa6"; + nvidia,function = "sdmmc4"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + sdmmc4_dat7_paa7 { + nvidia,pins = "sdmmc4_dat7_paa7"; + nvidia,function = "sdmmc4"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + sdmmc4_clk_pcc4 { + nvidia,pins = "sdmmc4_clk_pcc4"; + nvidia,function = "sdmmc4"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + sdmmc4_cmd_pt7 { + nvidia,pins = "sdmmc4_cmd_pt7"; + nvidia,function = "sdmmc4"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + + /* JTAG_RTCK */ + jtag_rtck { + nvidia,pins = "jtag_rtck"; + nvidia,function = "rtck"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + + /* LAN_DEV_OFF# */ + ulpi_data5_po6 { + nvidia,pins = "ulpi_data5_po6"; + nvidia,function = "ulpi"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + + /* LAN_RESET# */ + kb_row10_ps2 { + nvidia,pins = "kb_row10_ps2"; + nvidia,function = "rsvd2"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + + /* LAN_WAKE# */ + ulpi_data4_po5 { + nvidia,pins = "ulpi_data4_po5"; + nvidia,function = "ulpi"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + + /* MCU_INT1# */ + pk2 { + nvidia,pins = "pk2"; + nvidia,function = "rsvd1"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + + /* MCU_INT2# */ + pj2 { + nvidia,pins = "pj2"; + nvidia,function = "rsvd1"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + + /* MCU_INT3# */ + pi5 { + nvidia,pins = "pi5"; + nvidia,function = "rsvd2"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + + /* MCU_INT4# */ + pj0 { + nvidia,pins = "pj0"; + nvidia,function = "rsvd1"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + + /* MCU_RESET */ + pbb6 { + nvidia,pins = "pbb6"; + nvidia,function = "rsvd2"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + + /* MCU SPI */ + gpio_x4_aud_px4 { + nvidia,pins = "gpio_x4_aud_px4"; + nvidia,function = "spi2"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + gpio_x5_aud_px5 { + nvidia,pins = "gpio_x5_aud_px5"; + nvidia,function = "spi2"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + gpio_x6_aud_px6 { /* MCU_CS */ + nvidia,pins = "gpio_x6_aud_px6"; + nvidia,function = "spi2"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + gpio_x7_aud_px7 { + nvidia,pins = "gpio_x7_aud_px7"; + nvidia,function = "spi2"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + gpio_w2_aud_pw2 { /* MCU_CSEZP */ + nvidia,pins = "gpio_w2_aud_pw2"; + nvidia,function = "spi2"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + + /* PMIC_CLK_32K */ + clk_32k_in { + nvidia,pins = "clk_32k_in"; + nvidia,function = "clk"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + + /* PMIC_CPU_OC_INT */ + clk_32k_out_pa0 { + nvidia,pins = "clk_32k_out_pa0"; + nvidia,function = "soc"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + + /* PWR_I2C */ + pwr_i2c_scl_pz6 { + nvidia,pins = "pwr_i2c_scl_pz6"; + nvidia,function = "i2cpwr"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,open-drain = <TEGRA_PIN_ENABLE>; + }; + pwr_i2c_sda_pz7 { + nvidia,pins = "pwr_i2c_sda_pz7"; + nvidia,function = "i2cpwr"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,open-drain = <TEGRA_PIN_ENABLE>; + }; + + /* PWR_INT_N */ + pwr_int_n { + nvidia,pins = "pwr_int_n"; + nvidia,function = "pmi"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + + /* RESET_MOCI_CTRL */ + pu4 { + nvidia,pins = "pu4"; + nvidia,function = "gmi"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + + /* RESET_OUT_N */ + reset_out_n { + nvidia,pins = "reset_out_n"; + nvidia,function = "reset_out_n"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + + /* SHIFT_CTRL_DIR_IN */ + kb_row0_pr0 { + nvidia,pins = "kb_row0_pr0"; + nvidia,function = "rsvd2"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + kb_row1_pr1 { + nvidia,pins = "kb_row1_pr1"; + nvidia,function = "rsvd2"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + + /* Configure level-shifter as output for HDA */ + kb_row11_ps3 { + nvidia,pins = "kb_row11_ps3"; + nvidia,function = "rsvd2"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + + /* SHIFT_CTRL_DIR_OUT */ + kb_col5_pq5 { + nvidia,pins = "kb_col5_pq5"; + nvidia,function = "rsvd2"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + kb_col6_pq6 { + nvidia,pins = "kb_col6_pq6"; + nvidia,function = "rsvd2"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + kb_col7_pq7 { + nvidia,pins = "kb_col7_pq7"; + nvidia,function = "rsvd2"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + + /* SHIFT_CTRL_OE */ + kb_col0_pq0 { + nvidia,pins = "kb_col0_pq0"; + nvidia,function = "rsvd2"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + kb_col1_pq1 { + nvidia,pins = "kb_col1_pq1"; + nvidia,function = "rsvd2"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + kb_col2_pq2 { + nvidia,pins = "kb_col2_pq2"; + nvidia,function = "rsvd2"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + kb_col4_pq4 { + nvidia,pins = "kb_col4_pq4"; + nvidia,function = "kbc"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + kb_row2_pr2 { + nvidia,pins = "kb_row2_pr2"; + nvidia,function = "rsvd2"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + + /* GPIO_PI6 aka TEMP_ALERT_L */ + pi6 { + nvidia,pins = "pi6"; + nvidia,function = "rsvd1"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + + /* TOUCH_INT */ + gpio_w3_aud_pw3 { + nvidia,pins = "gpio_w3_aud_pw3"; + nvidia,function = "spi6"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + + pc7 { /* NC */ + nvidia,pins = "pc7"; + nvidia,function = "rsvd1"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + pg0 { /* NC */ + nvidia,pins = "pg0"; + nvidia,function = "rsvd1"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + pg1 { /* NC */ + nvidia,pins = "pg1"; + nvidia,function = "rsvd1"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + pg2 { /* NC */ + nvidia,pins = "pg2"; + nvidia,function = "rsvd1"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + pg3 { /* NC */ + nvidia,pins = "pg3"; + nvidia,function = "rsvd1"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + pg4 { /* NC */ + nvidia,pins = "pg4"; + nvidia,function = "rsvd1"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + ph4 { /* NC */ + nvidia,pins = "ph4"; + nvidia,function = "rsvd2"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + ph5 { /* NC */ + nvidia,pins = "ph5"; + nvidia,function = "rsvd2"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + ph6 { /* NC */ + nvidia,pins = "ph6"; + nvidia,function = "gmi"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + ph7 { /* NC */ + nvidia,pins = "ph7"; + nvidia,function = "gmi"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + pi0 { /* NC */ + nvidia,pins = "pi0"; + nvidia,function = "rsvd1"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + pi1 { /* NC */ + nvidia,pins = "pi1"; + nvidia,function = "rsvd1"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + pi2 { /* NC */ + nvidia,pins = "pi2"; + nvidia,function = "rsvd4"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + pi4 { /* NC */ + nvidia,pins = "pi4"; + nvidia,function = "gmi"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + pi7 { /* NC */ + nvidia,pins = "pi7"; + nvidia,function = "rsvd1"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + pk0 { /* NC */ + nvidia,pins = "pk0"; + nvidia,function = "rsvd1"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + pk1 { /* NC */ + nvidia,pins = "pk1"; + nvidia,function = "rsvd4"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + pk3 { /* NC */ + nvidia,pins = "pk3"; + nvidia,function = "gmi"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + pk4 { /* NC */ + nvidia,pins = "pk4"; + nvidia,function = "rsvd2"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + dap1_fs_pn0 { /* NC */ + nvidia,pins = "dap1_fs_pn0"; + nvidia,function = "rsvd4"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + dap1_din_pn1 { /* NC */ + nvidia,pins = "dap1_din_pn1"; + nvidia,function = "rsvd4"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + dap1_sclk_pn3 { /* NC */ + nvidia,pins = "dap1_sclk_pn3"; + nvidia,function = "rsvd4"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + ulpi_data7_po0 { /* NC */ + nvidia,pins = "ulpi_data7_po0"; + nvidia,function = "ulpi"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + ulpi_data0_po1 { /* NC */ + nvidia,pins = "ulpi_data0_po1"; + nvidia,function = "ulpi"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + ulpi_data1_po2 { /* NC */ + nvidia,pins = "ulpi_data1_po2"; + nvidia,function = "ulpi"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + ulpi_data2_po3 { /* NC */ + nvidia,pins = "ulpi_data2_po3"; + nvidia,function = "ulpi"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + ulpi_data3_po4 { /* NC */ + nvidia,pins = "ulpi_data3_po4"; + nvidia,function = "ulpi"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + ulpi_data6_po7 { /* NC */ + nvidia,pins = "ulpi_data6_po7"; + nvidia,function = "ulpi"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + dap4_fs_pp4 { /* NC */ + nvidia,pins = "dap4_fs_pp4"; + nvidia,function = "rsvd4"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + dap4_din_pp5 { /* NC */ + nvidia,pins = "dap4_din_pp5"; + nvidia,function = "rsvd3"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + dap4_dout_pp6 { /* NC */ + nvidia,pins = "dap4_dout_pp6"; + nvidia,function = "rsvd4"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + dap4_sclk_pp7 { /* NC */ + nvidia,pins = "dap4_sclk_pp7"; + nvidia,function = "rsvd3"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + kb_col3_pq3 { /* NC */ + nvidia,pins = "kb_col3_pq3"; + nvidia,function = "kbc"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + kb_row3_pr3 { /* NC */ + nvidia,pins = "kb_row3_pr3"; + nvidia,function = "kbc"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + kb_row4_pr4 { /* NC */ + nvidia,pins = "kb_row4_pr4"; + nvidia,function = "rsvd3"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + kb_row5_pr5 { /* NC */ + nvidia,pins = "kb_row5_pr5"; + nvidia,function = "rsvd3"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + kb_row6_pr6 { /* NC */ + nvidia,pins = "kb_row6_pr6"; + nvidia,function = "kbc"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + kb_row7_pr7 { /* NC */ + nvidia,pins = "kb_row7_pr7"; + nvidia,function = "rsvd2"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + kb_row8_ps0 { /* NC */ + nvidia,pins = "kb_row8_ps0"; + nvidia,function = "rsvd2"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + kb_row9_ps1 { /* NC */ + nvidia,pins = "kb_row9_ps1"; + nvidia,function = "rsvd2"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + kb_row12_ps4 { /* NC */ + nvidia,pins = "kb_row12_ps4"; + nvidia,function = "rsvd2"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + kb_row13_ps5 { /* NC */ + nvidia,pins = "kb_row13_ps5"; + nvidia,function = "rsvd2"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + kb_row14_ps6 { /* NC */ + nvidia,pins = "kb_row14_ps6"; + nvidia,function = "rsvd2"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + kb_row15_ps7 { /* NC */ + nvidia,pins = "kb_row15_ps7"; + nvidia,function = "rsvd3"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + kb_row16_pt0 { /* NC */ + nvidia,pins = "kb_row16_pt0"; + nvidia,function = "rsvd2"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + kb_row17_pt1 { /* NC */ + nvidia,pins = "kb_row17_pt1"; + nvidia,function = "rsvd2"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + pu5 { /* NC */ + nvidia,pins = "pu5"; + nvidia,function = "gmi"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + pv0 { /* NC */ + nvidia,pins = "pv0"; + nvidia,function = "rsvd1"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + pv1 { /* NC */ + nvidia,pins = "pv1"; + nvidia,function = "rsvd1"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + sdmmc3_cd_n_pv2 { /* NC */ + nvidia,pins = "sdmmc3_cd_n_pv2"; + nvidia,function = "rsvd3"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + gpio_x1_aud_px1 { /* NC */ + nvidia,pins = "gpio_x1_aud_px1"; + nvidia,function = "rsvd2"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + gpio_x3_aud_px3 { /* NC */ + nvidia,pins = "gpio_x3_aud_px3"; + nvidia,function = "rsvd4"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + pbb7 { /* NC */ + nvidia,pins = "pbb7"; + nvidia,function = "rsvd2"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + pcc1 { /* NC */ + nvidia,pins = "pcc1"; + nvidia,function = "rsvd2"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + pcc2 { /* NC */ + nvidia,pins = "pcc2"; + nvidia,function = "rsvd2"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + clk3_req_pee1 { /* NC */ + nvidia,pins = "clk3_req_pee1"; + nvidia,function = "rsvd2"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + dap_mclk1_req_pee2 { /* NC */ + nvidia,pins = "dap_mclk1_req_pee2"; + nvidia,function = "rsvd4"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + }; + }; + + serial@70006040 { + compatible = "nvidia,tegra124-hsuart"; + }; + + serial@70006200 { + compatible = "nvidia,tegra124-hsuart"; + }; + + serial@70006300 { + compatible = "nvidia,tegra124-hsuart"; + }; + + hdmi_ddc: i2c@7000c400 { + clock-frequency = <100000>; + }; + + /* PWR_I2C: power I2C to audio codec, PMIC and temperature sensor */ + i2c@7000d000 { + status = "okay"; + clock-frequency = <400000>; + + /* SGTL5000 audio codec */ + sgtl5000: codec@0a { + compatible = "fsl,sgtl5000"; + reg = <0x0a>; + VDDA-supply = <®_3v3>; + VDDIO-supply = <&vddio_1v8>; + clocks = <&tegra_car TEGRA124_CLK_EXTERN1>; + }; + + pmic: pmic@40 { + compatible = "ams,as3722"; + reg = <0x40>; + interrupts = <0 86 IRQ_TYPE_LEVEL_HIGH>; + + ams,system-power-controller; + + #interrupt-cells = <2>; + interrupt-controller; + + gpio-controller; + #gpio-cells = <2>; + + pinctrl-names = "default"; + pinctrl-0 = <&as3722_default>; + + as3722_default: pinmux { + gpio2_7 { + pins = "gpio2", /* PWR_EN_+V3.3 */ + "gpio7"; /* +V1.6_LPO */ + function = "gpio"; + bias-pull-up; + }; + + gpio1_3_4_5_6 { + pins = "gpio1", "gpio3", "gpio4", + "gpio5", "gpio6"; + bias-high-impedance; + }; + }; + + regulators { + vsup-sd2-supply = <®_3v3>; + vsup-sd3-supply = <®_3v3>; + vsup-sd4-supply = <®_3v3>; + vsup-sd5-supply = <®_3v3>; + vin-ldo0-supply = <&vddio_ddr_1v35>; + vin-ldo1-6-supply = <®_3v3>; + vin-ldo2-5-7-supply = <&vddio_1v8>; + vin-ldo3-4-supply = <®_3v3>; + vin-ldo9-10-supply = <®_3v3>; + vin-ldo11-supply = <®_3v3>; + + vdd_cpu: sd0 { + regulator-name = "+VDD_CPU_AP"; + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <1400000>; + regulator-min-microamp = <3500000>; + regulator-max-microamp = <3500000>; + regulator-always-on; + regulator-boot-on; + ams,ext-control = <2>; + }; + + sd1 { + regulator-name = "+VDD_CORE"; + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <1350000>; + regulator-min-microamp = <2500000>; + regulator-max-microamp = <4000000>; + regulator-always-on; + regulator-boot-on; + ams,ext-control = <1>; + }; + + vddio_ddr_1v35: sd2 { + regulator-name = + "+V1.35_VDDIO_DDR(sd2)"; + regulator-min-microvolt = <1350000>; + regulator-max-microvolt = <1350000>; + regulator-always-on; + regulator-boot-on; + }; + + sd3 { + regulator-name = + "+V1.35_VDDIO_DDR(sd3)"; + regulator-min-microvolt = <1350000>; + regulator-max-microvolt = <1350000>; + regulator-always-on; + regulator-boot-on; + }; + + vdd_1v05: sd4 { + regulator-name = "+V1.05"; + regulator-min-microvolt = <1050000>; + regulator-max-microvolt = <1050000>; + }; + + vddio_1v8: sd5 { + regulator-name = "+V1.8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + }; + + vdd_gpu: sd6 { + regulator-name = "+VDD_GPU_AP"; + regulator-min-microvolt = <650000>; + regulator-max-microvolt = <1200000>; + regulator-min-microamp = <3500000>; + regulator-max-microamp = <3500000>; + regulator-boot-on; + regulator-always-on; + }; + + avdd_1v05: ldo0 { + regulator-name = "+V1.05_AVDD"; + regulator-min-microvolt = <1050000>; + regulator-max-microvolt = <1050000>; + regulator-boot-on; + regulator-always-on; + ams,ext-control = <1>; + }; + + vddio_sdmmc1: ldo1 { + regulator-name = "VDDIO_SDMMC1"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + }; + + ldo2 { + regulator-name = "+V1.2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-boot-on; + regulator-always-on; + }; + + ldo3 { + regulator-name = "+V1.05_RTC"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-boot-on; + regulator-always-on; + ams,enable-tracking; + }; + + /* 1.8V for LVDS, 3.3V for eDP */ + ldo4 { + regulator-name = "AVDD_LVDS0_PLL"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + /* LDO5 not used */ + + vddio_sdmmc3: ldo6 { + regulator-name = "VDDIO_SDMMC3"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + }; + + /* LDO7 not used */ + + ldo9 { + regulator-name = "+V3.3_ETH(ldo9)"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + ldo10 { + regulator-name = "+V3.3_ETH(ldo10)"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + ldo11 { + regulator-name = "+V1.8_VPP_FUSE"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + }; + }; + + /* + * TMP451 temperature sensor + * Note: THERM_N directly connected to AS3722 PMIC THERM + */ + temperature-sensor@4c { + compatible = "ti,tmp451"; + reg = <0x4c>; + interrupt-parent = <&gpio>; + interrupts = <TEGRA_GPIO(I, 6) IRQ_TYPE_LEVEL_LOW>; + + #thermal-sensor-cells = <1>; + }; + }; + + /* SPI2: MCU SPI */ + spi@7000d600 { + status = "okay"; + spi-max-frequency = <25000000>; + }; + + pmc@7000e400 { + nvidia,invert-interrupt; + nvidia,suspend-mode = <1>; + nvidia,cpu-pwr-good-time = <500>; + nvidia,cpu-pwr-off-time = <300>; + nvidia,core-pwr-good-time = <641 3845>; + nvidia,core-pwr-off-time = <61036>; + nvidia,core-power-req-active-high; + nvidia,sys-clock-req-active-high; + + /* Set power_off bit in ResetControl register of AS3722 PMIC */ + i2c-thermtrip { + nvidia,i2c-controller-id = <4>; + nvidia,bus-addr = <0x40>; + nvidia,reg-addr = <0x36>; + nvidia,reg-data = <0x2>; + }; + }; + + sata@70020000 { + phys = <&{/padctl@7009f000/pads/sata/lanes/sata-0}>; + phy-names = "sata-0"; + + avdd-supply = <&vdd_1v05>; + hvdd-supply = <®_3v3>; + vddio-supply = <&vdd_1v05>; + }; + + usb@70090000 { + /* USBO1, USBO1 (SS), USBH2, USBH4 and USBH4 (SS) */ + phys = <&{/padctl@7009f000/pads/usb2/lanes/usb2-0}>, + <&{/padctl@7009f000/pads/pcie/lanes/pcie-1}>, + <&{/padctl@7009f000/pads/usb2/lanes/usb2-1}>, + <&{/padctl@7009f000/pads/usb2/lanes/usb2-2}>, + <&{/padctl@7009f000/pads/pcie/lanes/pcie-0}>; + phy-names = "usb2-0", "usb3-1", "usb2-1", "usb2-2", "usb3-0"; + + avddio-pex-supply = <&vdd_1v05>; + avdd-pll-erefe-supply = <&avdd_1v05>; + avdd-pll-utmip-supply = <&vddio_1v8>; + avdd-usb-ss-pll-supply = <&vdd_1v05>; + avdd-usb-supply = <®_3v3>; + dvddio-pex-supply = <&vdd_1v05>; + hvdd-usb-ss-pll-e-supply = <®_3v3>; + hvdd-usb-ss-supply = <®_3v3>; + }; + + padctl@7009f000 { + pads { + usb2 { + status = "okay"; + + lanes { + usb2-0 { + nvidia,function = "xusb"; + status = "okay"; + }; + + usb2-1 { + nvidia,function = "xusb"; + status = "okay"; + }; + + usb2-2 { + nvidia,function = "xusb"; + status = "okay"; + }; + }; + }; + + pcie { + status = "okay"; + + lanes { + pcie-0 { + nvidia,function = "usb3-ss"; + status = "okay"; + }; + + pcie-1 { + nvidia,function = "usb3-ss"; + status = "okay"; + }; + + pcie-2 { + nvidia,function = "pcie"; + status = "okay"; + }; + + pcie-3 { + nvidia,function = "pcie"; + status = "okay"; + }; + + pcie-4 { + nvidia,function = "pcie"; + status = "okay"; + }; + }; + }; + + sata { + status = "okay"; + + lanes { + sata-0 { + nvidia,function = "sata"; + status = "okay"; + }; + }; + }; + }; + + ports { + /* USBO1 */ + usb2-0 { + status = "okay"; + mode = "otg"; + + vbus-supply = <®_usbo1_vbus>; + }; + + /* USBH2 */ + usb2-1 { + status = "okay"; + mode = "host"; + + vbus-supply = <®_usbh_vbus>; + }; + + /* USBH4 */ + usb2-2 { + status = "okay"; + mode = "host"; + + vbus-supply = <®_usbh_vbus>; + }; + + usb3-0 { + nvidia,usb2-companion = <2>; + status = "okay"; + }; + + usb3-1 { + nvidia,usb2-companion = <0>; + status = "okay"; + }; + }; + }; + + /* eMMC */ + sdhci@700b0600 { + status = "okay"; + bus-width = <8>; + non-removable; + }; + + /* CPU DFLL clock */ + clock@70110000 { + status = "okay"; + vdd-cpu-supply = <&vdd_cpu>; + nvidia,i2c-fs-rate = <400000>; + }; + + ahub@70300000 { + i2s@70301200 { + status = "okay"; + }; + }; + + clocks { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <0>; + + clk32k_in: clock@0 { + compatible = "fixed-clock"; + reg = <0>; + #clock-cells = <0>; + clock-frequency = <32768>; + }; + }; + + cpus { + cpu@0 { + vdd-cpu-supply = <&vdd_cpu>; + }; + }; + + reg_1v05_avdd_hdmi_pll: regulator-1v05-avdd-hdmi-pll { + compatible = "regulator-fixed"; + regulator-name = "+V1.05_AVDD_HDMI_PLL"; + regulator-min-microvolt = <1050000>; + regulator-max-microvolt = <1050000>; + gpio = <&gpio TEGRA_GPIO(H, 7) GPIO_ACTIVE_LOW>; + vin-supply = <&vdd_1v05>; + }; + + reg_3v3_mxm: regulator-3v3-mxm { + compatible = "regulator-fixed"; + regulator-name = "+V3.3_MXM"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-boot-on; + }; + + reg_3v3: regulator-3v3 { + compatible = "regulator-fixed"; + regulator-name = "+V3.3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-boot-on; + /* PWR_EN_+V3.3 */ + gpio = <&pmic 2 GPIO_ACTIVE_HIGH>; + enable-active-high; + vin-supply = <®_3v3_mxm>; + }; + + reg_3v3_avdd_hdmi: regulator-3v3-avdd-hdmi { + compatible = "regulator-fixed"; + regulator-name = "+V3.3_AVDD_HDMI"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&vdd_1v05>; + }; + + sound { + compatible = "toradex,tegra-audio-sgtl5000-apalis_tk1", + "nvidia,tegra-audio-sgtl5000"; + nvidia,model = "Toradex Apalis TK1"; + nvidia,audio-routing = + "Headphone Jack", "HP_OUT", + "LINE_IN", "Line In Jack", + "MIC_IN", "Mic Jack"; + nvidia,i2s-controller = <&tegra_i2s2>; + nvidia,audio-codec = <&sgtl5000>; + clocks = <&tegra_car TEGRA124_CLK_PLL_A>, + <&tegra_car TEGRA124_CLK_PLL_A_OUT0>, + <&tegra_car TEGRA124_CLK_EXTERN1>; + clock-names = "pll_a", "pll_a_out0", "mclk"; + }; + + thermal-zones { + cpu { + trips { + trip@0 { + temperature = <101000>; + hysteresis = <0>; + type = "critical"; + }; + }; + + cooling-maps { + /* + * There are currently no cooling maps because + * there are no cooling devices + */ + }; + }; + + mem { + trips { + trip@0 { + temperature = <101000>; + hysteresis = <0>; + type = "critical"; + }; + }; + + cooling-maps { + /* + * There are currently no cooling maps because + * there are no cooling devices + */ + }; + }; + + gpu { + trips { + trip@0 { + temperature = <101000>; + hysteresis = <0>; + type = "critical"; + }; + }; + + cooling-maps { + /* + * There are currently no cooling maps because + * there are no cooling devices + */ + }; + }; + }; +}; diff --git a/arch/arm/boot/dts/tegra124-jetson-tk1-emc.dtsi b/arch/arm/boot/dts/tegra124-jetson-tk1-emc.dtsi index 2c5cede68..accb70551 100644 --- a/arch/arm/boot/dts/tegra124-jetson-tk1-emc.dtsi +++ b/arch/arm/boot/dts/tegra124-jetson-tk1-emc.dtsi @@ -1,5 +1,5 @@ / { - clock@0,60006000 { + clock@60006000 { emc-timings-3 { nvidia,ram-code = <3>; @@ -78,7 +78,7 @@ }; }; - emc@0,7001b000 { + emc@7001b000 { emc-timings-3 { nvidia,ram-code = <3>; @@ -2101,7 +2101,7 @@ }; }; - memory-controller@0,70019000 { + memory-controller@70019000 { emc-timings-3 { nvidia,ram-code = <3>; diff --git a/arch/arm/boot/dts/tegra124-jetson-tk1.dts b/arch/arm/boot/dts/tegra124-jetson-tk1.dts index f4d8125c1..e52b82449 100644 --- a/arch/arm/boot/dts/tegra124-jetson-tk1.dts +++ b/arch/arm/boot/dts/tegra124-jetson-tk1.dts @@ -10,8 +10,8 @@ compatible = "nvidia,jetson-tk1", "nvidia,tegra124"; aliases { - rtc0 = "/i2c@0,7000d000/pmic@40"; - rtc1 = "/rtc@0,7000e000"; + rtc0 = "/i2c@7000d000/pmic@40"; + rtc1 = "/rtc@7000e000"; /* This order keeps the mapping DB9 connector <-> ttyS0 */ serial0 = &uartd; @@ -27,7 +27,7 @@ reg = <0x0 0x80000000 0x0 0x80000000>; }; - pcie-controller@0,01003000 { + pcie-controller@01003000 { status = "okay"; avddio-pex-supply = <&vdd_1v05_run>; @@ -40,21 +40,21 @@ /* Mini PCIe */ pci@1,0 { - phys = <&{/padctl@0,7009f000/pads/pcie/lanes/pcie-4}>; + phys = <&{/padctl@7009f000/pads/pcie/lanes/pcie-4}>; phy-names = "pcie-0"; status = "okay"; }; /* Gigabit Ethernet */ pci@2,0 { - phys = <&{/padctl@0,7009f000/pads/pcie/lanes/pcie-2}>; + phys = <&{/padctl@7009f000/pads/pcie/lanes/pcie-2}>; phy-names = "pcie-0"; status = "okay"; }; }; - host1x@0,50000000 { - hdmi@0,54280000 { + host1x@50000000 { + hdmi@54280000 { status = "okay"; hdmi-supply = <&vdd_5v0_hdmi>; @@ -75,7 +75,7 @@ vdd-supply = <&vdd_gpu>; }; - pinmux: pinmux@0,70000868 { + pinmux: pinmux@70000868 { pinctrl-names = "boot"; pinctrl-0 = <&state_boot>; @@ -1356,14 +1356,6 @@ nvidia,tristate = <TEGRA_PIN_DISABLE>; nvidia,enable-input = <TEGRA_PIN_ENABLE>; }; - owr { - nvidia,pins = "owr"; - nvidia,function = "rsvd2"; - nvidia,pull = <TEGRA_PIN_PULL_DOWN>; - nvidia,tristate = <TEGRA_PIN_ENABLE>; - nvidia,enable-input = <TEGRA_PIN_DISABLE>; - nvidia,rcv-sel = <TEGRA_PIN_DISABLE>; - }; clk_32k_in { nvidia,pins = "clk_32k_in"; nvidia,function = "clk"; @@ -1378,6 +1370,10 @@ nvidia,tristate = <TEGRA_PIN_DISABLE>; nvidia,enable-input = <TEGRA_PIN_DISABLE>; }; + dsi_b { + nvidia,pins = "mipi_pad_ctrl_dsi_b"; + nvidia,function = "dsi_b"; + }; }; }; @@ -1386,7 +1382,7 @@ * Pin 41: BR_UART1_TXD * Pin 44: BR_UART1_RXD */ - serial@0,70006000 { + serial@70006000 { compatible = "nvidia,tegra124-hsuart", "nvidia,tegra30-hsuart"; status = "okay"; }; @@ -1398,18 +1394,18 @@ * Pin 71: UART2_CTS_L * Pin 74: UART2_RTS_L */ - serial@0,70006040 { + serial@70006040 { compatible = "nvidia,tegra124-hsuart", "nvidia,tegra30-hsuart"; status = "okay"; }; /* DB9 serial port */ - serial@0,70006300 { + serial@70006300 { status = "okay"; }; /* Expansion GEN1_I2C_*, mini-PCIe I2C, on-board components */ - i2c@0,7000c000 { + i2c@7000c000 { status = "okay"; clock-frequency = <100000>; @@ -1437,25 +1433,25 @@ }; /* Expansion GEN2_I2C_* */ - i2c@0,7000c400 { + i2c@7000c400 { status = "okay"; clock-frequency = <100000>; }; /* Expansion CAM_I2C_* */ - i2c@0,7000c500 { + i2c@7000c500 { status = "okay"; clock-frequency = <100000>; }; /* HDMI DDC */ - hdmi_ddc: i2c@0,7000c700 { + hdmi_ddc: i2c@7000c700 { status = "okay"; clock-frequency = <100000>; }; /* Expansion PWR_I2C_*, on-board components */ - i2c@0,7000d000 { + i2c@7000d000 { status = "okay"; clock-frequency = <400000>; @@ -1646,12 +1642,12 @@ }; /* Expansion TS_SPI_* */ - spi@0,7000d400 { + spi@7000d400 { status = "okay"; }; /* Internal SPI */ - spi@0,7000da00 { + spi@7000da00 { status = "okay"; spi-max-frequency = <25000000>; spi-flash@0 { @@ -1661,7 +1657,7 @@ }; }; - pmc@0,7000e400 { + pmc@7000e400 { nvidia,invert-interrupt; nvidia,suspend-mode = <1>; nvidia,cpu-pwr-good-time = <500>; @@ -1680,10 +1676,10 @@ }; /* Serial ATA */ - sata@0,70020000 { + sata@70020000 { status = "okay"; - phys = <&{/padctl@0,7009f000/pads/sata/lanes/sata-0}>; + phys = <&{/padctl@7009f000/pads/sata/lanes/sata-0}>; phy-names = "sata-0"; hvdd-supply = <&vdd_3v3_lp0>; @@ -1694,15 +1690,15 @@ target-12v-supply = <&vdd_12v0_sata>; }; - hda@0,70030000 { + hda@70030000 { status = "okay"; }; - usb@0,70090000 { - phys = <&{/padctl@0,7009f000/pads/usb2/lanes/usb2-0}>, /* Micro A/B */ - <&{/padctl@0,7009f000/pads/usb2/lanes/usb2-1}>, /* Mini PCIe */ - <&{/padctl@0,7009f000/pads/usb2/lanes/usb2-2}>, /* USB3 */ - <&{/padctl@0,7009f000/pads/pcie/lanes/pcie-0}>; /* USB3 */ + usb@70090000 { + phys = <&{/padctl@7009f000/pads/usb2/lanes/usb2-0}>, /* Micro A/B */ + <&{/padctl@7009f000/pads/usb2/lanes/usb2-1}>, /* Mini PCIe */ + <&{/padctl@7009f000/pads/usb2/lanes/usb2-2}>, /* USB3 */ + <&{/padctl@7009f000/pads/pcie/lanes/pcie-0}>; /* USB3 */ phy-names = "usb2-0", "usb2-1", "usb2-2", "usb3-0"; avddio-pex-supply = <&vdd_1v05_run>; @@ -1717,7 +1713,7 @@ status = "okay"; }; - padctl@0,7009f000 { + padctl@7009f000 { status = "okay"; pads { @@ -1804,7 +1800,7 @@ }; /* SD card */ - sdhci@0,700b0400 { + sdhci@700b0400 { status = "okay"; cd-gpios = <&gpio TEGRA_GPIO(V, 2) GPIO_ACTIVE_LOW>; power-gpios = <&gpio TEGRA_GPIO(R, 0) GPIO_ACTIVE_HIGH>; @@ -1814,40 +1810,40 @@ }; /* eMMC */ - sdhci@0,700b0600 { + sdhci@700b0600 { status = "okay"; bus-width = <8>; non-removable; }; /* CPU DFLL clock */ - clock@0,70110000 { + clock@70110000 { status = "okay"; vdd-cpu-supply = <&vdd_cpu>; nvidia,i2c-fs-rate = <400000>; }; - ahub@0,70300000 { - i2s@0,70301100 { + ahub@70300000 { + i2s@70301100 { status = "okay"; }; }; /* mini-PCIe USB */ - usb@0,7d004000 { + usb@7d004000 { status = "okay"; }; - usb-phy@0,7d004000 { + usb-phy@7d004000 { status = "okay"; }; /* USB A connector */ - usb@0,7d008000 { + usb@7d008000 { status = "okay"; }; - usb-phy@0,7d008000 { + usb-phy@7d008000 { status = "okay"; vbus-supply = <&vdd_usb3_vbus>; }; @@ -2049,7 +2045,7 @@ thermal-zones { cpu { trips { - trip@0 { + trip { temperature = <101000>; hysteresis = <0>; type = "critical"; @@ -2063,7 +2059,7 @@ mem { trips { - trip@0 { + trip { temperature = <101000>; hysteresis = <0>; type = "critical"; @@ -2077,7 +2073,7 @@ gpu { trips { - trip@0 { + trip { temperature = <101000>; hysteresis = <0>; type = "critical"; diff --git a/arch/arm/boot/dts/tegra124-nyan-big-emc.dtsi b/arch/arm/boot/dts/tegra124-nyan-big-emc.dtsi index 1a5748d05..4458e86b2 100644 --- a/arch/arm/boot/dts/tegra124-nyan-big-emc.dtsi +++ b/arch/arm/boot/dts/tegra124-nyan-big-emc.dtsi @@ -1,5 +1,5 @@ / { - clock@0,60006000 { + clock@60006000 { emc-timings-1 { nvidia,ram-code = <1>; @@ -67,7 +67,7 @@ }; }; - emc@0,7001b000 { + emc@7001b000 { emc-timings-1 { nvidia,ram-code = <1>; @@ -1754,7 +1754,7 @@ }; }; - memory-controller@0,70019000 { + memory-controller@70019000 { emc-timings-1 { nvidia,ram-code = <1>; diff --git a/arch/arm/boot/dts/tegra124-nyan-big.dts b/arch/arm/boot/dts/tegra124-nyan-big.dts index 2d21253ea..67d7cfb32 100644 --- a/arch/arm/boot/dts/tegra124-nyan-big.dts +++ b/arch/arm/boot/dts/tegra124-nyan-big.dts @@ -15,7 +15,7 @@ ddc-i2c-bus = <&dpaux>; }; - sdhci@0,700b0400 { /* SD Card on this bus */ + sdhci@700b0400 { /* SD Card on this bus */ wp-gpios = <&gpio TEGRA_GPIO(Q, 4) GPIO_ACTIVE_LOW>; }; @@ -26,7 +26,7 @@ nvidia,model = "GoogleNyanBig"; }; - pinmux@0,70000868 { + pinmux@70000868 { pinctrl-names = "default"; pinctrl-0 = <&pinmux_default>; diff --git a/arch/arm/boot/dts/tegra124-nyan-blaze-emc.dtsi b/arch/arm/boot/dts/tegra124-nyan-blaze-emc.dtsi index 9ecd108f5..4e7b59e25 100644 --- a/arch/arm/boot/dts/tegra124-nyan-blaze-emc.dtsi +++ b/arch/arm/boot/dts/tegra124-nyan-blaze-emc.dtsi @@ -1,5 +1,5 @@ / { - clock@0,60006000 { + clock@60006000 { emc-timings-1 { nvidia,ram-code = <1>; @@ -67,7 +67,7 @@ }; }; - emc@0,7001b000 { + emc@7001b000 { emc-timings-1 { nvidia,ram-code = <1>; @@ -1754,7 +1754,7 @@ }; }; - memory-controller@0,70019000 { + memory-controller@70019000 { emc-timings-1 { nvidia,ram-code = <1>; diff --git a/arch/arm/boot/dts/tegra124-nyan-blaze.dts b/arch/arm/boot/dts/tegra124-nyan-blaze.dts index 0d30c514f..c9582361c 100644 --- a/arch/arm/boot/dts/tegra124-nyan-blaze.dts +++ b/arch/arm/boot/dts/tegra124-nyan-blaze.dts @@ -22,7 +22,7 @@ nvidia,model = "GoogleNyanBlaze"; }; - pinmux@0,70000868 { + pinmux@70000868 { pinctrl-names = "default"; pinctrl-0 = <&pinmux_default>; diff --git a/arch/arm/boot/dts/tegra124-nyan.dtsi b/arch/arm/boot/dts/tegra124-nyan.dtsi index 0710a600c..271505e07 100644 --- a/arch/arm/boot/dts/tegra124-nyan.dtsi +++ b/arch/arm/boot/dts/tegra124-nyan.dtsi @@ -3,8 +3,8 @@ / { aliases { - rtc0 = "/i2c@0,7000d000/pmic@40"; - rtc1 = "/rtc@0,7000e000"; + rtc0 = "/i2c@7000d000/pmic@40"; + rtc1 = "/rtc@7000e000"; serial0 = &uarta; }; @@ -16,8 +16,8 @@ reg = <0x0 0x80000000 0x0 0x80000000>; }; - host1x@0,50000000 { - hdmi@0,54280000 { + host1x@50000000 { + hdmi@54280000 { status = "okay"; vdd-supply = <&vdd_3v3_hdmi>; @@ -29,29 +29,29 @@ <&gpio TEGRA_GPIO(N, 7) GPIO_ACTIVE_HIGH>; }; - sor@0,54540000 { + sor@54540000 { status = "okay"; nvidia,dpaux = <&dpaux>; nvidia,panel = <&panel>; }; - dpaux@0,545c0000 { + dpaux@545c0000 { vdd-supply = <&vdd_3v3_panel>; status = "okay"; }; }; - serial@0,70006000 { + serial@70006000 { /* Debug connector on the bottom of the board near SD card. */ status = "okay"; }; - pwm@0,7000a000 { + pwm@7000a000 { status = "okay"; }; - i2c@0,7000c000 { + i2c@7000c000 { status = "okay"; clock-frequency = <100000>; @@ -72,7 +72,7 @@ }; }; - i2c@0,7000c400 { + i2c@7000c400 { status = "okay"; clock-frequency = <100000>; @@ -85,7 +85,7 @@ }; }; - i2c@0,7000c500 { + i2c@7000c500 { status = "okay"; clock-frequency = <400000>; @@ -95,12 +95,12 @@ }; }; - hdmi_ddc: i2c@0,7000c700 { + hdmi_ddc: i2c@7000c700 { status = "okay"; clock-frequency = <100000>; }; - i2c@0,7000d000 { + i2c@7000d000 { status = "okay"; clock-frequency = <400000>; @@ -301,7 +301,7 @@ }; }; - spi@0,7000d400 { + spi@7000d400 { status = "okay"; cros_ec: cros-ec@0 { @@ -342,7 +342,7 @@ }; }; - spi@0,7000da00 { + spi@7000da00 { status = "okay"; spi-max-frequency = <25000000>; @@ -353,7 +353,7 @@ }; }; - pmc@0,7000e400 { + pmc@7000e400 { nvidia,invert-interrupt; nvidia,suspend-mode = <0>; nvidia,cpu-pwr-good-time = <500>; @@ -364,16 +364,16 @@ nvidia,sys-clock-req-active-high; }; - hda@0,70030000 { + hda@70030000 { status = "okay"; }; - usb@0,70090000 { - phys = <&{/padctl@0,7009f000/pads/usb2/lanes/usb2-0}>, /* 1st USB A */ - <&{/padctl@0,7009f000/pads/usb2/lanes/usb2-1}>, /* Internal USB */ - <&{/padctl@0,7009f000/pads/usb2/lanes/usb2-2}>, /* 2nd USB A */ - <&{/padctl@0,7009f000/pads/pcie/lanes/pcie-0}>, /* 1st USB A */ - <&{/padctl@0,7009f000/pads/pcie/lanes/pcie-1}>; /* 2nd USB A */ + usb@70090000 { + phys = <&{/padctl@7009f000/pads/usb2/lanes/usb2-0}>, /* 1st USB A */ + <&{/padctl@7009f000/pads/usb2/lanes/usb2-1}>, /* Internal USB */ + <&{/padctl@7009f000/pads/usb2/lanes/usb2-2}>, /* 2nd USB A */ + <&{/padctl@7009f000/pads/pcie/lanes/pcie-0}>, /* 1st USB A */ + <&{/padctl@7009f000/pads/pcie/lanes/pcie-1}>; /* 2nd USB A */ phy-names = "usb2-0", "usb2-1", "usb2-2", "usb3-0", "usb3-1"; avddio-pex-supply = <&vdd_1v05_run>; @@ -388,7 +388,7 @@ status = "okay"; }; - padctl@0,7009f000 { + padctl@7009f000 { status = "okay"; pads { @@ -467,7 +467,7 @@ reset-gpios = <&gpio TEGRA_GPIO(X, 7) GPIO_ACTIVE_LOW>; }; - sdhci@0,700b0000 { /* WiFi/BT on this bus */ + sdhci@700b0000 { /* WiFi/BT on this bus */ status = "okay"; bus-width = <4>; no-1-8-v; @@ -478,7 +478,7 @@ keep-power-in-suspend; }; - sdhci@0,700b0400 { /* SD Card on this bus */ + sdhci@700b0400 { /* SD Card on this bus */ status = "okay"; cd-gpios = <&gpio TEGRA_GPIO(V, 2) GPIO_ACTIVE_LOW>; power-gpios = <&gpio TEGRA_GPIO(R, 0) GPIO_ACTIVE_HIGH>; @@ -487,7 +487,7 @@ vqmmc-supply = <&vddio_sdmmc3>; }; - sdhci@0,700b0600 { /* eMMC on this bus */ + sdhci@700b0600 { /* eMMC on this bus */ status = "okay"; bus-width = <8>; no-1-8-v; @@ -495,14 +495,14 @@ }; /* CPU DFLL clock */ - clock@0,70110000 { + clock@70110000 { status = "disabled"; vdd-cpu-supply = <&vdd_cpu>; nvidia,i2c-fs-rate = <400000>; }; - ahub@0,70300000 { - i2s@0,70301100 { + ahub@70300000 { + i2s@70301100 { status = "okay"; }; }; diff --git a/arch/arm/boot/dts/tegra124-venice2.dts b/arch/arm/boot/dts/tegra124-venice2.dts index 973446d07..6e59cec09 100644 --- a/arch/arm/boot/dts/tegra124-venice2.dts +++ b/arch/arm/boot/dts/tegra124-venice2.dts @@ -8,8 +8,8 @@ compatible = "nvidia,venice2", "nvidia,tegra124"; aliases { - rtc0 = "/i2c@0,7000d000/pmic@40"; - rtc1 = "/rtc@0,7000e000"; + rtc0 = "/i2c@7000d000/pmic@40"; + rtc1 = "/rtc@7000e000"; serial0 = &uarta; }; @@ -21,8 +21,8 @@ reg = <0x0 0x80000000 0x0 0x80000000>; }; - host1x@0,50000000 { - hdmi@0,54280000 { + host1x@50000000 { + hdmi@54280000 { status = "okay"; vdd-supply = <&vdd_3v3_hdmi>; @@ -34,14 +34,14 @@ <&gpio TEGRA_GPIO(N, 7) GPIO_ACTIVE_HIGH>; }; - sor@0,54540000 { + sor@54540000 { status = "okay"; nvidia,dpaux = <&dpaux>; nvidia,panel = <&panel>; }; - dpaux@0,545c0000 { + dpaux@545c0000 { vdd-supply = <&vdd_3v3_panel>; status = "okay"; }; @@ -55,7 +55,7 @@ vdd-supply = <&vdd_gpu>; }; - pinmux: pinmux@0,70000868 { + pinmux: pinmux@70000868 { pinctrl-names = "boot"; pinctrl-0 = <&pinmux_boot>; @@ -596,15 +596,15 @@ }; }; - serial@0,70006000 { + serial@70006000 { status = "okay"; }; - pwm@0,7000a000 { + pwm@7000a000 { status = "okay"; }; - i2c@0,7000c000 { + i2c@7000c000 { status = "okay"; clock-frequency = <100000>; @@ -616,7 +616,7 @@ }; }; - i2c@0,7000c400 { + i2c@7000c400 { status = "okay"; clock-frequency = <100000>; @@ -629,17 +629,17 @@ }; }; - i2c@0,7000c500 { + i2c@7000c500 { status = "okay"; clock-frequency = <100000>; }; - hdmi_ddc: i2c@0,7000c700 { + hdmi_ddc: i2c@7000c700 { status = "okay"; clock-frequency = <100000>; }; - i2c@0,7000d000 { + i2c@7000d000 { status = "okay"; clock-frequency = <400000>; @@ -834,7 +834,7 @@ }; }; - spi@0,7000d400 { + spi@7000d400 { status = "okay"; cros_ec: cros-ec@0 { @@ -874,7 +874,7 @@ }; }; - spi@0,7000da00 { + spi@7000da00 { status = "okay"; spi-max-frequency = <25000000>; spi-flash@0 { @@ -884,7 +884,7 @@ }; }; - pmc@0,7000e400 { + pmc@7000e400 { nvidia,invert-interrupt; nvidia,suspend-mode = <1>; nvidia,cpu-pwr-good-time = <500>; @@ -895,16 +895,16 @@ nvidia,sys-clock-req-active-high; }; - hda@0,70030000 { + hda@70030000 { status = "okay"; }; - usb@0,70090000 { - phys = <&{/padctl@0,7009f000/pads/usb2/lanes/usb2-0}>, /* 1st USB A */ - <&{/padctl@0,7009f000/pads/usb2/lanes/usb2-1}>, /* Internal USB */ - <&{/padctl@0,7009f000/pads/usb2/lanes/usb2-2}>, /* 2nd USB A */ - <&{/padctl@0,7009f000/pads/pcie/lanes/pcie-0}>, /* 1st USB A */ - <&{/padctl@0,7009f000/pads/pcie/lanes/pcie-1}>; /* 2nd USB A */ + usb@70090000 { + phys = <&{/padctl@7009f000/pads/usb2/lanes/usb2-0}>, /* 1st USB A */ + <&{/padctl@7009f000/pads/usb2/lanes/usb2-1}>, /* Internal USB */ + <&{/padctl@7009f000/pads/usb2/lanes/usb2-2}>, /* 2nd USB A */ + <&{/padctl@7009f000/pads/pcie/lanes/pcie-0}>, /* 1st USB A */ + <&{/padctl@7009f000/pads/pcie/lanes/pcie-1}>; /* 2nd USB A */ phy-names = "usb2-0", "usb2-1", "usb2-2", "usb3-0", "usb3-1"; avddio-pex-supply = <&vdd_1v05_run>; @@ -919,7 +919,7 @@ status = "okay"; }; - padctl@0,7009f000 { + padctl@7009f000 { pads { usb2 { status = "okay"; @@ -998,7 +998,7 @@ }; }; - sdhci@0,700b0400 { + sdhci@700b0400 { cd-gpios = <&gpio TEGRA_GPIO(V, 2) GPIO_ACTIVE_HIGH>; power-gpios = <&gpio TEGRA_GPIO(R, 0) GPIO_ACTIVE_HIGH>; wp-gpios = <&gpio TEGRA_GPIO(Q, 4) GPIO_ACTIVE_LOW>; @@ -1007,41 +1007,41 @@ vqmmc-supply = <&vddio_sdmmc3>; }; - sdhci@0,700b0600 { + sdhci@700b0600 { status = "okay"; bus-width = <8>; non-removable; }; - ahub@0,70300000 { - i2s@0,70301100 { + ahub@70300000 { + i2s@70301100 { status = "okay"; }; }; - usb@0,7d000000 { + usb@7d000000 { status = "okay"; }; - usb-phy@0,7d000000 { + usb-phy@7d000000 { status = "okay"; vbus-supply = <&vdd_usb1_vbus>; }; - usb@0,7d004000 { + usb@7d004000 { status = "okay"; }; - usb-phy@0,7d004000 { + usb-phy@7d004000 { status = "okay"; vbus-supply = <&vdd_run_cam>; }; - usb@0,7d008000 { + usb@7d008000 { status = "okay"; }; - usb-phy@0,7d008000 { + usb-phy@7d008000 { status = "okay"; vbus-supply = <&vdd_usb3_vbus>; }; diff --git a/arch/arm/boot/dts/tegra124.dtsi b/arch/arm/boot/dts/tegra124.dtsi index ea4811870..ea340f9de 100644 --- a/arch/arm/boot/dts/tegra124.dtsi +++ b/arch/arm/boot/dts/tegra124.dtsi @@ -14,7 +14,7 @@ #address-cells = <2>; #size-cells = <2>; - pcie-controller@0,01003000 { + pcie-controller@01003000 { compatible = "nvidia,tegra124-pcie"; device_type = "pci"; reg = <0x0 0x01003000 0x0 0x00000800 /* PADS registers */ @@ -77,7 +77,7 @@ }; }; - host1x@0,50000000 { + host1x@50000000 { compatible = "nvidia,tegra124-host1x", "simple-bus"; reg = <0x0 0x50000000 0x0 0x00034000>; interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>, /* syncpt */ @@ -91,7 +91,7 @@ ranges = <0 0x54000000 0 0x54000000 0 0x01000000>; - dc@0,54200000 { + dc@54200000 { compatible = "nvidia,tegra124-dc"; reg = <0x0 0x54200000 0x0 0x00040000>; interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>; @@ -106,7 +106,7 @@ nvidia,head = <0>; }; - dc@0,54240000 { + dc@54240000 { compatible = "nvidia,tegra124-dc"; reg = <0x0 0x54240000 0x0 0x00040000>; interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>; @@ -121,7 +121,7 @@ nvidia,head = <1>; }; - hdmi@0,54280000 { + hdmi@54280000 { compatible = "nvidia,tegra124-hdmi"; reg = <0x0 0x54280000 0x0 0x00040000>; interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>; @@ -133,7 +133,7 @@ status = "disabled"; }; - sor@0,54540000 { + sor@54540000 { compatible = "nvidia,tegra124-sor"; reg = <0x0 0x54540000 0x0 0x00040000>; interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>; @@ -147,7 +147,7 @@ status = "disabled"; }; - dpaux: dpaux@0,545c0000 { + dpaux: dpaux@545c0000 { compatible = "nvidia,tegra124-dpaux"; reg = <0x0 0x545c0000 0x0 0x00040000>; interrupts = <GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH>; @@ -160,7 +160,7 @@ }; }; - gic: interrupt-controller@0,50041000 { + gic: interrupt-controller@50041000 { compatible = "arm,cortex-a15-gic"; #interrupt-cells = <3>; interrupt-controller; @@ -173,6 +173,11 @@ interrupt-parent = <&gic>; }; + /* + * Please keep the following 0, notation in place as a former mainline + * U-Boot version was looking for that particular notation in order to + * perform required fix-ups on that GPU node. + */ gpu@0,57000000 { compatible = "nvidia,gk20a"; reg = <0x0 0x57000000 0x0 0x01000000>, @@ -203,7 +208,7 @@ interrupt-parent = <&gic>; }; - timer@0,60005000 { + timer@60005000 { compatible = "nvidia,tegra124-timer", "nvidia,tegra30-timer", "nvidia,tegra20-timer"; reg = <0x0 0x60005000 0x0 0x400>; interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>, @@ -215,7 +220,7 @@ clocks = <&tegra_car TEGRA124_CLK_TIMER>; }; - tegra_car: clock@0,60006000 { + tegra_car: clock@60006000 { compatible = "nvidia,tegra124-car"; reg = <0x0 0x60006000 0x0 0x1000>; #clock-cells = <1>; @@ -223,12 +228,12 @@ nvidia,external-memory-controller = <&emc>; }; - flow-controller@0,60007000 { + flow-controller@60007000 { compatible = "nvidia,tegra124-flowctrl"; reg = <0x0 0x60007000 0x0 0x1000>; }; - actmon@0,6000c800 { + actmon@6000c800 { compatible = "nvidia,tegra124-actmon"; reg = <0x0 0x6000c800 0x0 0x400>; interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>; @@ -239,7 +244,7 @@ reset-names = "actmon"; }; - gpio: gpio@0,6000d000 { + gpio: gpio@6000d000 { compatible = "nvidia,tegra124-gpio", "nvidia,tegra30-gpio"; reg = <0x0 0x6000d000 0x0 0x1000>; interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>, @@ -259,7 +264,7 @@ */ }; - apbdma: dma@0,60020000 { + apbdma: dma@60020000 { compatible = "nvidia,tegra124-apbdma", "nvidia,tegra148-apbdma"; reg = <0x0 0x60020000 0x0 0x1400>; interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>, @@ -300,13 +305,13 @@ #dma-cells = <1>; }; - apbmisc@0,70000800 { + apbmisc@70000800 { compatible = "nvidia,tegra124-apbmisc", "nvidia,tegra20-apbmisc"; reg = <0x0 0x70000800 0x0 0x64>, /* Chip revision */ <0x0 0x7000e864 0x0 0x04>; /* Strapping options */ }; - pinmux: pinmux@0,70000868 { + pinmux: pinmux@70000868 { compatible = "nvidia,tegra124-pinmux"; reg = <0x0 0x70000868 0x0 0x164>, /* Pad control registers */ <0x0 0x70003000 0x0 0x434>, /* Mux registers */ @@ -321,7 +326,7 @@ * the APB DMA based serial driver, the compatible is * "nvidia,tegra124-hsuart", "nvidia,tegra30-hsuart". */ - uarta: serial@0,70006000 { + uarta: serial@70006000 { compatible = "nvidia,tegra124-uart", "nvidia,tegra20-uart"; reg = <0x0 0x70006000 0x0 0x40>; reg-shift = <2>; @@ -334,7 +339,7 @@ status = "disabled"; }; - uartb: serial@0,70006040 { + uartb: serial@70006040 { compatible = "nvidia,tegra124-uart", "nvidia,tegra20-uart"; reg = <0x0 0x70006040 0x0 0x40>; reg-shift = <2>; @@ -347,7 +352,7 @@ status = "disabled"; }; - uartc: serial@0,70006200 { + uartc: serial@70006200 { compatible = "nvidia,tegra124-uart", "nvidia,tegra20-uart"; reg = <0x0 0x70006200 0x0 0x40>; reg-shift = <2>; @@ -360,7 +365,7 @@ status = "disabled"; }; - uartd: serial@0,70006300 { + uartd: serial@70006300 { compatible = "nvidia,tegra124-uart", "nvidia,tegra20-uart"; reg = <0x0 0x70006300 0x0 0x40>; reg-shift = <2>; @@ -373,7 +378,7 @@ status = "disabled"; }; - pwm: pwm@0,7000a000 { + pwm: pwm@7000a000 { compatible = "nvidia,tegra124-pwm", "nvidia,tegra20-pwm"; reg = <0x0 0x7000a000 0x0 0x100>; #pwm-cells = <2>; @@ -383,7 +388,7 @@ status = "disabled"; }; - i2c@0,7000c000 { + i2c@7000c000 { compatible = "nvidia,tegra124-i2c", "nvidia,tegra114-i2c"; reg = <0x0 0x7000c000 0x0 0x100>; interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>; @@ -398,7 +403,7 @@ status = "disabled"; }; - i2c@0,7000c400 { + i2c@7000c400 { compatible = "nvidia,tegra124-i2c", "nvidia,tegra114-i2c"; reg = <0x0 0x7000c400 0x0 0x100>; interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>; @@ -413,7 +418,7 @@ status = "disabled"; }; - i2c@0,7000c500 { + i2c@7000c500 { compatible = "nvidia,tegra124-i2c", "nvidia,tegra114-i2c"; reg = <0x0 0x7000c500 0x0 0x100>; interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>; @@ -428,7 +433,7 @@ status = "disabled"; }; - i2c@0,7000c700 { + i2c@7000c700 { compatible = "nvidia,tegra124-i2c", "nvidia,tegra114-i2c"; reg = <0x0 0x7000c700 0x0 0x100>; interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>; @@ -443,7 +448,7 @@ status = "disabled"; }; - i2c@0,7000d000 { + i2c@7000d000 { compatible = "nvidia,tegra124-i2c", "nvidia,tegra114-i2c"; reg = <0x0 0x7000d000 0x0 0x100>; interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>; @@ -458,7 +463,7 @@ status = "disabled"; }; - i2c@0,7000d100 { + i2c@7000d100 { compatible = "nvidia,tegra124-i2c", "nvidia,tegra114-i2c"; reg = <0x0 0x7000d100 0x0 0x100>; interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>; @@ -473,7 +478,7 @@ status = "disabled"; }; - spi@0,7000d400 { + spi@7000d400 { compatible = "nvidia,tegra124-spi", "nvidia,tegra114-spi"; reg = <0x0 0x7000d400 0x0 0x200>; interrupts = <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>; @@ -488,7 +493,7 @@ status = "disabled"; }; - spi@0,7000d600 { + spi@7000d600 { compatible = "nvidia,tegra124-spi", "nvidia,tegra114-spi"; reg = <0x0 0x7000d600 0x0 0x200>; interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>; @@ -503,7 +508,7 @@ status = "disabled"; }; - spi@0,7000d800 { + spi@7000d800 { compatible = "nvidia,tegra124-spi", "nvidia,tegra114-spi"; reg = <0x0 0x7000d800 0x0 0x200>; interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>; @@ -518,7 +523,7 @@ status = "disabled"; }; - spi@0,7000da00 { + spi@7000da00 { compatible = "nvidia,tegra124-spi", "nvidia,tegra114-spi"; reg = <0x0 0x7000da00 0x0 0x200>; interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>; @@ -533,7 +538,7 @@ status = "disabled"; }; - spi@0,7000dc00 { + spi@7000dc00 { compatible = "nvidia,tegra124-spi", "nvidia,tegra114-spi"; reg = <0x0 0x7000dc00 0x0 0x200>; interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>; @@ -548,7 +553,7 @@ status = "disabled"; }; - spi@0,7000de00 { + spi@7000de00 { compatible = "nvidia,tegra124-spi", "nvidia,tegra114-spi"; reg = <0x0 0x7000de00 0x0 0x200>; interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>; @@ -563,21 +568,21 @@ status = "disabled"; }; - rtc@0,7000e000 { + rtc@7000e000 { compatible = "nvidia,tegra124-rtc", "nvidia,tegra20-rtc"; reg = <0x0 0x7000e000 0x0 0x100>; interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>; clocks = <&tegra_car TEGRA124_CLK_RTC>; }; - pmc@0,7000e400 { + pmc@7000e400 { compatible = "nvidia,tegra124-pmc"; reg = <0x0 0x7000e400 0x0 0x400>; clocks = <&tegra_car TEGRA124_CLK_PCLK>, <&clk32k_in>; clock-names = "pclk", "clk32k_in"; }; - fuse@0,7000f800 { + fuse@7000f800 { compatible = "nvidia,tegra124-efuse"; reg = <0x0 0x7000f800 0x0 0x400>; clocks = <&tegra_car TEGRA124_CLK_FUSE>; @@ -586,7 +591,7 @@ reset-names = "fuse"; }; - mc: memory-controller@0,70019000 { + mc: memory-controller@70019000 { compatible = "nvidia,tegra124-mc"; reg = <0x0 0x70019000 0x0 0x1000>; clocks = <&tegra_car TEGRA124_CLK_MC>; @@ -597,14 +602,14 @@ #iommu-cells = <1>; }; - emc: emc@0,7001b000 { + emc: emc@7001b000 { compatible = "nvidia,tegra124-emc"; reg = <0x0 0x7001b000 0x0 0x1000>; nvidia,memory-controller = <&mc>; }; - sata@0,70020000 { + sata@70020000 { compatible = "nvidia,tegra124-ahci"; reg = <0x0 0x70027000 0x0 0x2000>, /* AHCI */ <0x0 0x70020000 0x0 0x7000>; /* SATA */ @@ -621,7 +626,7 @@ status = "disabled"; }; - hda@0,70030000 { + hda@70030000 { compatible = "nvidia,tegra124-hda", "nvidia,tegra30-hda"; reg = <0x0 0x70030000 0x0 0x10000>; interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>; @@ -636,7 +641,7 @@ status = "disabled"; }; - usb@0,70090000 { + usb@70090000 { compatible = "nvidia,tegra124-xusb"; reg = <0x0 0x70090000 0x0 0x8000>, <0x0 0x70098000 0x0 0x1000>, @@ -671,7 +676,7 @@ status = "disabled"; }; - padctl: padctl@0,7009f000 { + padctl: padctl@7009f000 { compatible = "nvidia,tegra124-xusb-padctl"; reg = <0x0 0x7009f000 0x0 0x1000>; resets = <&tegra_car 142>; @@ -804,7 +809,7 @@ }; }; - sdhci@0,700b0000 { + sdhci@700b0000 { compatible = "nvidia,tegra124-sdhci"; reg = <0x0 0x700b0000 0x0 0x200>; interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>; @@ -814,7 +819,7 @@ status = "disabled"; }; - sdhci@0,700b0200 { + sdhci@700b0200 { compatible = "nvidia,tegra124-sdhci"; reg = <0x0 0x700b0200 0x0 0x200>; interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>; @@ -824,7 +829,7 @@ status = "disabled"; }; - sdhci@0,700b0400 { + sdhci@700b0400 { compatible = "nvidia,tegra124-sdhci"; reg = <0x0 0x700b0400 0x0 0x200>; interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>; @@ -834,7 +839,7 @@ status = "disabled"; }; - sdhci@0,700b0600 { + sdhci@700b0600 { compatible = "nvidia,tegra124-sdhci"; reg = <0x0 0x700b0600 0x0 0x200>; interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>; @@ -844,7 +849,7 @@ status = "disabled"; }; - soctherm: thermal-sensor@0,700e2000 { + soctherm: thermal-sensor@700e2000 { compatible = "nvidia,tegra124-soctherm"; reg = <0x0 0x700e2000 0x0 0x1000>; interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>; @@ -856,7 +861,7 @@ #thermal-sensor-cells = <1>; }; - dfll: clock@0,70110000 { + dfll: clock@70110000 { compatible = "nvidia,tegra124-dfll"; reg = <0 0x70110000 0 0x100>, /* DFLL control */ <0 0x70110000 0 0x100>, /* I2C output control */ @@ -880,7 +885,7 @@ status = "disabled"; }; - ahub@0,70300000 { + ahub@70300000 { compatible = "nvidia,tegra124-ahub"; reg = <0x0 0x70300000 0x0 0x200>, <0x0 0x70300800 0x0 0x800>, @@ -932,7 +937,7 @@ #address-cells = <2>; #size-cells = <2>; - tegra_i2s0: i2s@0,70301000 { + tegra_i2s0: i2s@70301000 { compatible = "nvidia,tegra124-i2s"; reg = <0x0 0x70301000 0x0 0x100>; nvidia,ahub-cif-ids = <4 4>; @@ -942,7 +947,7 @@ status = "disabled"; }; - tegra_i2s1: i2s@0,70301100 { + tegra_i2s1: i2s@70301100 { compatible = "nvidia,tegra124-i2s"; reg = <0x0 0x70301100 0x0 0x100>; nvidia,ahub-cif-ids = <5 5>; @@ -952,7 +957,7 @@ status = "disabled"; }; - tegra_i2s2: i2s@0,70301200 { + tegra_i2s2: i2s@70301200 { compatible = "nvidia,tegra124-i2s"; reg = <0x0 0x70301200 0x0 0x100>; nvidia,ahub-cif-ids = <6 6>; @@ -962,7 +967,7 @@ status = "disabled"; }; - tegra_i2s3: i2s@0,70301300 { + tegra_i2s3: i2s@70301300 { compatible = "nvidia,tegra124-i2s"; reg = <0x0 0x70301300 0x0 0x100>; nvidia,ahub-cif-ids = <7 7>; @@ -972,7 +977,7 @@ status = "disabled"; }; - tegra_i2s4: i2s@0,70301400 { + tegra_i2s4: i2s@70301400 { compatible = "nvidia,tegra124-i2s"; reg = <0x0 0x70301400 0x0 0x100>; nvidia,ahub-cif-ids = <8 8>; @@ -983,7 +988,7 @@ }; }; - usb@0,7d000000 { + usb@7d000000 { compatible = "nvidia,tegra124-ehci", "nvidia,tegra30-ehci", "usb-ehci"; reg = <0x0 0x7d000000 0x0 0x4000>; interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>; @@ -995,7 +1000,7 @@ status = "disabled"; }; - phy1: usb-phy@0,7d000000 { + phy1: usb-phy@7d000000 { compatible = "nvidia,tegra124-usb-phy", "nvidia,tegra30-usb-phy"; reg = <0x0 0x7d000000 0x0 0x4000>, <0x0 0x7d000000 0x0 0x4000>; @@ -1020,7 +1025,7 @@ status = "disabled"; }; - usb@0,7d004000 { + usb@7d004000 { compatible = "nvidia,tegra124-ehci", "nvidia,tegra30-ehci", "usb-ehci"; reg = <0x0 0x7d004000 0x0 0x4000>; interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>; @@ -1032,7 +1037,7 @@ status = "disabled"; }; - phy2: usb-phy@0,7d004000 { + phy2: usb-phy@7d004000 { compatible = "nvidia,tegra124-usb-phy", "nvidia,tegra30-usb-phy"; reg = <0x0 0x7d004000 0x0 0x4000>, <0x0 0x7d000000 0x0 0x4000>; @@ -1056,7 +1061,7 @@ status = "disabled"; }; - usb@0,7d008000 { + usb@7d008000 { compatible = "nvidia,tegra124-ehci", "nvidia,tegra30-ehci", "usb-ehci"; reg = <0x0 0x7d008000 0x0 0x4000>; interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>; @@ -1068,7 +1073,7 @@ status = "disabled"; }; - phy3: usb-phy@0,7d008000 { + phy3: usb-phy@7d008000 { compatible = "nvidia,tegra124-usb-phy", "nvidia,tegra30-usb-phy"; reg = <0x0 0x7d008000 0x0 0x4000>, <0x0 0x7d000000 0x0 0x4000>; diff --git a/arch/arm/boot/dts/tegra20-colibri-512.dtsi b/arch/arm/boot/dts/tegra20-colibri-512.dtsi index 8e0066ad9..1242b841f 100644 --- a/arch/arm/boot/dts/tegra20-colibri-512.dtsi +++ b/arch/arm/boot/dts/tegra20-colibri-512.dtsi @@ -478,7 +478,7 @@ clk32k_in: clock@0 { compatible = "fixed-clock"; - reg=<0>; + reg = <0>; #clock-cells = <0>; clock-frequency = <32768>; }; diff --git a/arch/arm/boot/dts/tegra20-harmony.dts b/arch/arm/boot/dts/tegra20-harmony.dts index d2e960cbc..d4fb4d39e 100644 --- a/arch/arm/boot/dts/tegra20-harmony.dts +++ b/arch/arm/boot/dts/tegra20-harmony.dts @@ -646,7 +646,7 @@ clk32k_in: clock@0 { compatible = "fixed-clock"; - reg=<0>; + reg = <0>; #clock-cells = <0>; clock-frequency = <32768>; }; diff --git a/arch/arm/boot/dts/tegra20-paz00.dts b/arch/arm/boot/dts/tegra20-paz00.dts index 33ed2b230..4e361a8c1 100644 --- a/arch/arm/boot/dts/tegra20-paz00.dts +++ b/arch/arm/boot/dts/tegra20-paz00.dts @@ -512,7 +512,7 @@ clk32k_in: clock@0 { compatible = "fixed-clock"; - reg=<0>; + reg = <0>; #clock-cells = <0>; clock-frequency = <32768>; }; diff --git a/arch/arm/boot/dts/tegra20-seaboard.dts b/arch/arm/boot/dts/tegra20-seaboard.dts index 94b60a710..2017acacc 100644 --- a/arch/arm/boot/dts/tegra20-seaboard.dts +++ b/arch/arm/boot/dts/tegra20-seaboard.dts @@ -798,7 +798,7 @@ clk32k_in: clock@0 { compatible = "fixed-clock"; - reg=<0>; + reg = <0>; #clock-cells = <0>; clock-frequency = <32768>; }; diff --git a/arch/arm/boot/dts/tegra20-tamonten.dtsi b/arch/arm/boot/dts/tegra20-tamonten.dtsi index 025e9e803..27d2bbbf1 100644 --- a/arch/arm/boot/dts/tegra20-tamonten.dtsi +++ b/arch/arm/boot/dts/tegra20-tamonten.dtsi @@ -508,7 +508,7 @@ clk32k_in: clock@0 { compatible = "fixed-clock"; - reg=<0>; + reg = <0>; #clock-cells = <0>; clock-frequency = <32768>; }; diff --git a/arch/arm/boot/dts/tegra20-trimslice.dts b/arch/arm/boot/dts/tegra20-trimslice.dts index 4a035f740..381747f11 100644 --- a/arch/arm/boot/dts/tegra20-trimslice.dts +++ b/arch/arm/boot/dts/tegra20-trimslice.dts @@ -383,7 +383,7 @@ clk32k_in: clock@0 { compatible = "fixed-clock"; - reg=<0>; + reg = <0>; #clock-cells = <0>; clock-frequency = <32768>; }; diff --git a/arch/arm/boot/dts/tegra20-ventana.dts b/arch/arm/boot/dts/tegra20-ventana.dts index a28c060a8..8f0aaabf7 100644 --- a/arch/arm/boot/dts/tegra20-ventana.dts +++ b/arch/arm/boot/dts/tegra20-ventana.dts @@ -592,7 +592,7 @@ clk32k_in: clock@0 { compatible = "fixed-clock"; - reg=<0>; + reg = <0>; #clock-cells = <0>; clock-frequency = <32768>; }; diff --git a/arch/arm/boot/dts/tegra20-whistler.dts b/arch/arm/boot/dts/tegra20-whistler.dts index 073806d07..1e06f854c 100644 --- a/arch/arm/boot/dts/tegra20-whistler.dts +++ b/arch/arm/boot/dts/tegra20-whistler.dts @@ -569,7 +569,7 @@ clk32k_in: clock@0 { compatible = "fixed-clock"; - reg=<0>; + reg = <0>; #clock-cells = <0>; clock-frequency = <32768>; }; diff --git a/arch/arm/boot/dts/tegra30-apalis.dtsi b/arch/arm/boot/dts/tegra30-apalis.dtsi index bf361277f..192b95177 100644 --- a/arch/arm/boot/dts/tegra30-apalis.dtsi +++ b/arch/arm/boot/dts/tegra30-apalis.dtsi @@ -567,7 +567,7 @@ blocks = <0x5>; irq-trigger = <0x1>; - stmpe_touchscreen { + stmpe_touchscreen@0 { compatible = "st,stmpe-ts"; reg = <0>; /* 3.25 MHz ADC clock speed */ @@ -674,13 +674,14 @@ clk32k_in: clk@0 { compatible = "fixed-clock"; - reg=<0>; + reg = <0>; #clock-cells = <0>; clock-frequency = <32768>; }; + clk16m: clk@1 { compatible = "fixed-clock"; - reg=<1>; + reg = <1>; #clock-cells = <0>; clock-frequency = <16000000>; clock-output-names = "clk16m"; diff --git a/arch/arm/boot/dts/tegra30-beaver.dts b/arch/arm/boot/dts/tegra30-beaver.dts index b6da15d82..035000284 100644 --- a/arch/arm/boot/dts/tegra30-beaver.dts +++ b/arch/arm/boot/dts/tegra30-beaver.dts @@ -1952,7 +1952,7 @@ clk32k_in: clock@0 { compatible = "fixed-clock"; - reg=<0>; + reg = <0>; #clock-cells = <0>; clock-frequency = <32768>; }; diff --git a/arch/arm/boot/dts/tegra30-cardhu.dtsi b/arch/arm/boot/dts/tegra30-cardhu.dtsi index 4721c1c9c..f11012bb5 100644 --- a/arch/arm/boot/dts/tegra30-cardhu.dtsi +++ b/arch/arm/boot/dts/tegra30-cardhu.dtsi @@ -423,7 +423,7 @@ clk32k_in: clock@0 { compatible = "fixed-clock"; - reg=<0>; + reg = <0>; #clock-cells = <0>; clock-frequency = <32768>; }; diff --git a/arch/arm/boot/dts/tegra30-colibri-eval-v3.dts b/arch/arm/boot/dts/tegra30-colibri-eval-v3.dts index 76875c316..a8c031874 100644 --- a/arch/arm/boot/dts/tegra30-colibri-eval-v3.dts +++ b/arch/arm/boot/dts/tegra30-colibri-eval-v3.dts @@ -131,7 +131,7 @@ clocks { clk16m: clk@1 { compatible = "fixed-clock"; - reg=<1>; + reg = <1>; #clock-cells = <0>; clock-frequency = <16000000>; clock-output-names = "clk16m"; diff --git a/arch/arm/boot/dts/tegra30-colibri.dtsi b/arch/arm/boot/dts/tegra30-colibri.dtsi index 2d8c58fd9..a265534cd 100644 --- a/arch/arm/boot/dts/tegra30-colibri.dtsi +++ b/arch/arm/boot/dts/tegra30-colibri.dtsi @@ -420,7 +420,7 @@ clk32k_in: clk@0 { compatible = "fixed-clock"; - reg=<0>; + reg = <0>; #clock-cells = <0>; clock-frequency = <32768>; }; diff --git a/arch/arm/boot/dts/tny_a9260_common.dtsi b/arch/arm/boot/dts/tny_a9260_common.dtsi index ce7138c3a..f9dc463b9 100644 --- a/arch/arm/boot/dts/tny_a9260_common.dtsi +++ b/arch/arm/boot/dts/tny_a9260_common.dtsi @@ -16,15 +16,6 @@ }; clocks { - #address-cells = <1>; - #size-cells = <1>; - ranges; - - main_clock: clock@0 { - compatible = "atmel,osc", "fixed-clock"; - clock-frequency = <12000000>; - }; - slow_xtal { clock-frequency = <32768>; }; diff --git a/arch/arm/boot/dts/tny_a9263.dts b/arch/arm/boot/dts/tny_a9263.dts index 304329634..9161cd988 100644 --- a/arch/arm/boot/dts/tny_a9263.dts +++ b/arch/arm/boot/dts/tny_a9263.dts @@ -21,15 +21,6 @@ }; clocks { - #address-cells = <1>; - #size-cells = <1>; - ranges; - - main_clock: clock@0 { - compatible = "atmel,osc", "fixed-clock"; - clock-frequency = <12000000>; - }; - slow_xtal { clock-frequency = <32768>; }; @@ -99,7 +90,7 @@ }; }; - i2c@0 { + i2c-gpio-0 { status = "okay"; }; }; diff --git a/arch/arm/boot/dts/uniphier-common32.dtsi b/arch/arm/boot/dts/uniphier-common32.dtsi index 61a095598..03f60ec34 100644 --- a/arch/arm/boot/dts/uniphier-common32.dtsi +++ b/arch/arm/boot/dts/uniphier-common32.dtsi @@ -105,6 +105,8 @@ reg = <0x58c00000 0x400>; #address-cells = <2>; #size-cells = <1>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_system_bus>; }; smpctrl@59800000 { @@ -134,9 +136,13 @@ interrupt-controller; }; - pinctrl: pinctrl@5f801000 { - /* specify compatible in each SoC DTSI */ - reg = <0x5f801000 0xe00>; + soc-glue@5f800000 { + compatible = "simple-mfd", "syscon"; + reg = <0x5f800000 0x2000>; + + pinctrl: pinctrl { + /* specify compatible in each SoC DTSI */ + }; }; }; }; diff --git a/arch/arm/boot/dts/uniphier-ph1-ld4.dtsi b/arch/arm/boot/dts/uniphier-ph1-ld4.dtsi index dadd86070..debad7ffe 100644 --- a/arch/arm/boot/dts/uniphier-ph1-ld4.dtsi +++ b/arch/arm/boot/dts/uniphier-ph1-ld4.dtsi @@ -182,5 +182,5 @@ }; &pinctrl { - compatible = "socionext,ph1-ld4-pinctrl", "syscon"; + compatible = "socionext,uniphier-ld4-pinctrl"; }; diff --git a/arch/arm/boot/dts/uniphier-ph1-ld6b.dtsi b/arch/arm/boot/dts/uniphier-ph1-ld6b.dtsi index 532115234..19c107c66 100644 --- a/arch/arm/boot/dts/uniphier-ph1-ld6b.dtsi +++ b/arch/arm/boot/dts/uniphier-ph1-ld6b.dtsi @@ -63,5 +63,5 @@ * which makes the pinctrl driver unshareable. */ &pinctrl { - compatible = "socionext,ph1-ld6b-pinctrl", "syscon"; + compatible = "socionext,uniphier-ld6b-pinctrl"; }; diff --git a/arch/arm/boot/dts/uniphier-ph1-pro4.dtsi b/arch/arm/boot/dts/uniphier-ph1-pro4.dtsi index 20f3f2ae7..7b9da0852 100644 --- a/arch/arm/boot/dts/uniphier-ph1-pro4.dtsi +++ b/arch/arm/boot/dts/uniphier-ph1-pro4.dtsi @@ -200,5 +200,5 @@ }; &pinctrl { - compatible = "socionext,ph1-pro4-pinctrl", "syscon"; + compatible = "socionext,uniphier-pro4-pinctrl"; }; diff --git a/arch/arm/boot/dts/uniphier-ph1-pro5.dtsi b/arch/arm/boot/dts/uniphier-ph1-pro5.dtsi index 24f6f664b..7e4aa2fde 100644 --- a/arch/arm/boot/dts/uniphier-ph1-pro5.dtsi +++ b/arch/arm/boot/dts/uniphier-ph1-pro5.dtsi @@ -194,5 +194,5 @@ }; &pinctrl { - compatible = "socionext,ph1-pro5-pinctrl", "syscon"; + compatible = "socionext,uniphier-pro5-pinctrl"; }; diff --git a/arch/arm/boot/dts/uniphier-ph1-sld8.dtsi b/arch/arm/boot/dts/uniphier-ph1-sld8.dtsi index 6bfd29a05..467f9d8e9 100644 --- a/arch/arm/boot/dts/uniphier-ph1-sld8.dtsi +++ b/arch/arm/boot/dts/uniphier-ph1-sld8.dtsi @@ -181,5 +181,5 @@ }; &pinctrl { - compatible = "socionext,ph1-sld8-pinctrl", "syscon"; + compatible = "socionext,uniphier-sld8-pinctrl"; }; diff --git a/arch/arm/boot/dts/uniphier-pinctrl.dtsi b/arch/arm/boot/dts/uniphier-pinctrl.dtsi index f2f3fbe2d..10a711041 100644 --- a/arch/arm/boot/dts/uniphier-pinctrl.dtsi +++ b/arch/arm/boot/dts/uniphier-pinctrl.dtsi @@ -78,6 +78,11 @@ function = "nand"; }; + pinctrl_system_bus: system_bus_grp { + groups = "system_bus", "system_bus_cs1"; + function = "system_bus"; + }; + pinctrl_uart0: uart0_grp { groups = "uart0"; function = "uart0"; diff --git a/arch/arm/boot/dts/uniphier-proxstream2-gentil.dts b/arch/arm/boot/dts/uniphier-proxstream2-gentil.dts index bf2619e4d..98d895b7a 100644 --- a/arch/arm/boot/dts/uniphier-proxstream2-gentil.dts +++ b/arch/arm/boot/dts/uniphier-proxstream2-gentil.dts @@ -55,13 +55,13 @@ }; chosen { - stdout-path = "serial2:115200n8"; + stdout-path = "serial0:115200n8"; }; aliases { - serial0 = &serial0; - serial1 = &serial1; - serial2 = &serial2; + serial0 = &serial2; + serial1 = &serial0; + serial2 = &serial1; i2c0 = &i2c0; i2c2 = &i2c2; i2c4 = &i2c4; diff --git a/arch/arm/boot/dts/uniphier-proxstream2-vodka.dts b/arch/arm/boot/dts/uniphier-proxstream2-vodka.dts index 498acac3d..1fb8bd7bb 100644 --- a/arch/arm/boot/dts/uniphier-proxstream2-vodka.dts +++ b/arch/arm/boot/dts/uniphier-proxstream2-vodka.dts @@ -55,13 +55,13 @@ }; chosen { - stdout-path = "serial2:115200n8"; + stdout-path = "serial0:115200n8"; }; aliases { - serial0 = &serial0; - serial1 = &serial1; - serial2 = &serial2; + serial0 = &serial2; + serial1 = &serial0; + serial2 = &serial1; i2c0 = &i2c0; i2c4 = &i2c4; i2c5 = &i2c5; diff --git a/arch/arm/boot/dts/uniphier-proxstream2.dtsi b/arch/arm/boot/dts/uniphier-proxstream2.dtsi index 4ac484c6c..d00d6f5c2 100644 --- a/arch/arm/boot/dts/uniphier-proxstream2.dtsi +++ b/arch/arm/boot/dts/uniphier-proxstream2.dtsi @@ -205,5 +205,5 @@ }; &pinctrl { - compatible = "socionext,proxstream2-pinctrl", "syscon"; + compatible = "socionext,uniphier-pxs2-pinctrl"; }; diff --git a/arch/arm/boot/dts/usb_a9260_common.dtsi b/arch/arm/boot/dts/usb_a9260_common.dtsi index 9beea8976..7514b347c 100644 --- a/arch/arm/boot/dts/usb_a9260_common.dtsi +++ b/arch/arm/boot/dts/usb_a9260_common.dtsi @@ -8,15 +8,6 @@ / { clocks { - #address-cells = <1>; - #size-cells = <1>; - ranges; - - main_clock: clock@0 { - compatible = "atmel,osc", "fixed-clock"; - clock-frequency = <12000000>; - }; - slow_xtal { clock-frequency = <32768>; }; @@ -90,7 +81,7 @@ }; }; - usb0: ohci@00500000 { + usb0: ohci@500000 { num-ports = <2>; status = "okay"; }; @@ -119,7 +110,7 @@ }; }; - i2c@0 { + i2c-gpio-0 { status = "okay"; }; }; diff --git a/arch/arm/boot/dts/usb_a9263.dts b/arch/arm/boot/dts/usb_a9263.dts index 8cc6edb29..bfc48a272 100644 --- a/arch/arm/boot/dts/usb_a9263.dts +++ b/arch/arm/boot/dts/usb_a9263.dts @@ -21,15 +21,6 @@ }; clocks { - #address-cells = <1>; - #size-cells = <1>; - ranges; - - main_clock: clock@0 { - compatible = "atmel,osc", "fixed-clock"; - clock-frequency = <12000000>; - }; - slow_xtal { clock-frequency = <32768>; }; @@ -147,7 +138,7 @@ }; }; - i2c@0 { + i2c-gpio-0 { status = "okay"; }; }; diff --git a/arch/arm/boot/dts/usb_a9g20_common.dtsi b/arch/arm/boot/dts/usb_a9g20_common.dtsi index 0b3b36182..088c2c368 100644 --- a/arch/arm/boot/dts/usb_a9g20_common.dtsi +++ b/arch/arm/boot/dts/usb_a9g20_common.dtsi @@ -11,14 +11,15 @@ / { chosen { - bootargs = "mem=64M console=ttyS0,115200 root=/dev/mtdblock5 rw rootfstype=ubifs"; + bootargs = "mem=64M root=/dev/mtdblock5 rw rootfstype=ubifs"; + stdout-path = "serial0:115200n8"; }; memory { reg = <0x20000000 0x4000000>; }; - i2c@0 { + i2c-gpio-0 { rv3029c2@56 { compatible = "rv3029c2"; reg = <0x56>; diff --git a/arch/arm/boot/dts/vf610-zii-dev-rev-b.dts b/arch/arm/boot/dts/vf610-zii-dev-rev-b.dts index 6c60b7f91..5c1fcab4a 100644 --- a/arch/arm/boot/dts/vf610-zii-dev-rev-b.dts +++ b/arch/arm/boot/dts/vf610-zii-dev-rev-b.dts @@ -85,187 +85,199 @@ reg = <1>; #address-cells = <1>; #size-cells = <0>; + + switch0: switch0@0 { + compatible = "marvell,mv88e6085"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + dsa,member = <0 0>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + port@0 { + reg = <0>; + label = "lan0"; + }; + + port@1 { + reg = <1>; + label = "lan1"; + }; + + port@2 { + reg = <2>; + label = "lan2"; + }; + + switch0port5: port@5 { + reg = <5>; + label = "dsa"; + phy-mode = "rgmii-txid"; + link = <&switch1port6 + &switch2port9>; + fixed-link { + speed = <1000>; + full-duplex; + }; + }; + + port@6 { + reg = <6>; + label = "cpu"; + ethernet = <&fec1>; + fixed-link { + speed = <100>; + full-duplex; + }; + }; + }; + }; }; mdio_mux_2: mdio@2 { reg = <2>; #address-cells = <1>; #size-cells = <0>; - }; - - mdio_mux_4: mdio@4 { - reg = <4>; - #address-cells = <1>; - #size-cells = <0>; - }; - - mdio_mux_8: mdio@8 { - reg = <8>; - #address-cells = <1>; - #size-cells = <0>; - }; - }; - - dsa { - compatible = "marvell,dsa"; - #address-cells = <2>; - #size-cells = <0>; - dsa,ethernet = <&fec1>; - dsa,mii-bus = <&mdio_mux_1>; - - /* 6352 - Primary - 7 ports */ - switch0: switch@0-0 { - #address-cells = <1>; - #size-cells = <0>; - reg = <0x00 0>; - eeprom-length = <512>; - port@0 { + switch1: switch1@0 { + compatible = "marvell,mv88e6085"; + #address-cells = <1>; + #size-cells = <0>; reg = <0>; - label = "lan0"; - }; - - port@1 { - reg = <1>; - label = "lan1"; - }; - - port@2 { - reg = <2>; - label = "lan2"; - }; - - switch0port5: port@5 { - reg = <5>; - label = "dsa"; - phy-mode = "rgmii-txid"; - link = <&switch1port6 - &switch2port9>; - - fixed-link { - speed = <1000>; - full-duplex; + dsa,member = <0 1>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + port@0 { + reg = <0>; + label = "lan3"; + phy-handle = <&switch1phy0>; + }; + + port@1 { + reg = <1>; + label = "lan4"; + phy-handle = <&switch1phy1>; + }; + + port@2 { + reg = <2>; + label = "lan5"; + phy-handle = <&switch1phy2>; + }; + + switch1port5: port@5 { + reg = <5>; + label = "dsa"; + link = <&switch2port9>; + phy-mode = "rgmii-txid"; + fixed-link { + speed = <1000>; + full-duplex; + }; + }; + + switch1port6: port@6 { + reg = <6>; + label = "dsa"; + phy-mode = "rgmii-txid"; + link = <&switch0port5>; + fixed-link { + speed = <1000>; + full-duplex; + }; + }; }; - }; - - port@6 { - reg = <6>; - label = "cpu"; - - fixed-link { - speed = <100>; - full-duplex; + mdio { + #address-cells = <1>; + #size-cells = <0>; + switch1phy0: switch1phy0@0 { + reg = <0>; + }; + switch1phy1: switch1phy0@1 { + reg = <1>; + }; + switch1phy2: switch1phy0@2 { + reg = <2>; + }; }; }; - }; - /* 6352 - Secondary - 7 ports */ - switch1: switch@0-1 { + mdio_mux_4: mdio@4 { #address-cells = <1>; #size-cells = <0>; - reg = <0x00 1>; - eeprom-length = <512>; - mii-bus = <&mdio_mux_2>; + reg = <4>; - port@0 { + switch2: switch2@0 { + compatible = "marvell,mv88e6085"; + #address-cells = <1>; + #size-cells = <0>; reg = <0>; - label = "lan3"; - }; - - port@1 { - reg = <1>; - label = "lan4"; - }; - - port@2 { - reg = <2>; - label = "lan5"; - }; - - switch1port5: port@5 { - reg = <5>; - label = "dsa"; - link = <&switch2port9>; - phy-mode = "rgmii-txid"; - - fixed-link { - speed = <1000>; - full-duplex; - }; - }; - - switch1port6: port@6 { - reg = <6>; - label = "dsa"; - phy-mode = "rgmii-txid"; - link = <&switch0port5>; - - fixed-link { - speed = <1000>; - full-duplex; + dsa,member = <0 2>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + port@0 { + reg = <0>; + label = "lan6"; + }; + + port@1 { + reg = <1>; + label = "lan7"; + }; + + port@2 { + reg = <2>; + label = "lan8"; + }; + + port@3 { + reg = <3>; + label = "optical3"; + fixed-link { + speed = <1000>; + full-duplex; + link-gpios = <&gpio6 2 + GPIO_ACTIVE_HIGH>; + }; + }; + + port@4 { + reg = <4>; + label = "optical4"; + fixed-link { + speed = <1000>; + full-duplex; + link-gpios = <&gpio6 3 + GPIO_ACTIVE_HIGH>; + }; + }; + + switch2port9: port@9 { + reg = <9>; + label = "dsa"; + phy-mode = "rgmii-txid"; + link = <&switch1port5 + &switch0port5>; + fixed-link { + speed = <1000>; + full-duplex; + }; + }; }; }; }; - /* 6185 - 10 ports */ - switch2: switch@0-2 { + mdio_mux_8: mdio@8 { + reg = <8>; #address-cells = <1>; #size-cells = <0>; - reg = <0x00 2>; - mii-bus = <&mdio_mux_4>; - - port@0 { - reg = <0>; - label = "lan6"; - }; - - port@1 { - reg = <1>; - label = "lan7"; - }; - - port@2 { - reg = <2>; - label = "lan8"; - }; - - port@3 { - reg = <3>; - label = "optical3"; - - fixed-link { - speed = <1000>; - full-duplex; - link-gpios = <&gpio6 2 - GPIO_ACTIVE_HIGH>; - }; - }; - - port@4 { - reg = <4>; - label = "optical4"; - - fixed-link { - speed = <1000>; - full-duplex; - link-gpios = <&gpio6 3 - GPIO_ACTIVE_HIGH>; - }; - }; - - switch2port9: port@9 { - reg = <9>; - label = "dsa"; - phy-mode = "rgmii-txid"; - link = <&switch1port5 - &switch0port5>; - - fixed-link { - speed = <1000>; - full-duplex; - }; - }; }; }; diff --git a/arch/arm/common/dmabounce.c b/arch/arm/common/dmabounce.c index 1143c4d5c..301281645 100644 --- a/arch/arm/common/dmabounce.c +++ b/arch/arm/common/dmabounce.c @@ -310,7 +310,7 @@ static inline void unmap_single(struct device *dev, struct safe_buffer *buf, */ static dma_addr_t dmabounce_map_page(struct device *dev, struct page *page, unsigned long offset, size_t size, enum dma_data_direction dir, - struct dma_attrs *attrs) + unsigned long attrs) { dma_addr_t dma_addr; int ret; @@ -344,7 +344,7 @@ static dma_addr_t dmabounce_map_page(struct device *dev, struct page *page, * should be) */ static void dmabounce_unmap_page(struct device *dev, dma_addr_t dma_addr, size_t size, - enum dma_data_direction dir, struct dma_attrs *attrs) + enum dma_data_direction dir, unsigned long attrs) { struct safe_buffer *buf; diff --git a/arch/arm/common/locomo.c b/arch/arm/common/locomo.c index 0e97b4b87..6c7b06854 100644 --- a/arch/arm/common/locomo.c +++ b/arch/arm/common/locomo.c @@ -140,7 +140,7 @@ static struct locomo_dev_info locomo_devices[] = { static void locomo_handler(struct irq_desc *desc) { - struct locomo *lchip = irq_desc_get_chip_data(desc); + struct locomo *lchip = irq_desc_get_handler_data(desc); int req, i; /* Acknowledge the parent IRQ */ @@ -200,8 +200,7 @@ static void locomo_setup_irq(struct locomo *lchip) * Install handler for IRQ_LOCOMO_HW. */ irq_set_irq_type(lchip->irq, IRQ_TYPE_EDGE_FALLING); - irq_set_chip_data(lchip->irq, lchip); - irq_set_chained_handler(lchip->irq, locomo_handler); + irq_set_chained_handler_and_data(lchip->irq, locomo_handler, lchip); /* Install handlers for IRQ_LOCOMO_* */ for ( ; irq <= lchip->irq_base + 3; irq++) { diff --git a/arch/arm/common/sa1111.c b/arch/arm/common/sa1111.c index fb0a0a4df..2e076c492 100644 --- a/arch/arm/common/sa1111.c +++ b/arch/arm/common/sa1111.c @@ -472,8 +472,8 @@ static int sa1111_setup_irq(struct sa1111 *sachip, unsigned irq_base) * specifies that S0ReadyInt and S1ReadyInt should be '1'. */ sa1111_writel(0, irqbase + SA1111_INTPOL0); - sa1111_writel(SA1111_IRQMASK_HI(IRQ_S0_READY_NINT) | - SA1111_IRQMASK_HI(IRQ_S1_READY_NINT), + sa1111_writel(BIT(IRQ_S0_READY_NINT & 31) | + BIT(IRQ_S1_READY_NINT & 31), irqbase + SA1111_INTPOL1); /* clear all IRQs */ @@ -754,7 +754,7 @@ static int __sa1111_probe(struct device *me, struct resource *mem, int irq) if (sachip->irq != NO_IRQ) { ret = sa1111_setup_irq(sachip, pd->irq_base); if (ret) - goto err_unmap; + goto err_clk; } #ifdef CONFIG_ARCH_SA1100 @@ -799,6 +799,8 @@ static int __sa1111_probe(struct device *me, struct resource *mem, int irq) return 0; + err_clk: + clk_disable(sachip->clk); err_unmap: iounmap(sachip->base); err_clk_unprep: @@ -869,9 +871,9 @@ struct sa1111_save_data { #ifdef CONFIG_PM -static int sa1111_suspend(struct platform_device *dev, pm_message_t state) +static int sa1111_suspend_noirq(struct device *dev) { - struct sa1111 *sachip = platform_get_drvdata(dev); + struct sa1111 *sachip = dev_get_drvdata(dev); struct sa1111_save_data *save; unsigned long flags; unsigned int val; @@ -934,9 +936,9 @@ static int sa1111_suspend(struct platform_device *dev, pm_message_t state) * restored by their respective drivers, and must be called * via LDM after this function. */ -static int sa1111_resume(struct platform_device *dev) +static int sa1111_resume_noirq(struct device *dev) { - struct sa1111 *sachip = platform_get_drvdata(dev); + struct sa1111 *sachip = dev_get_drvdata(dev); struct sa1111_save_data *save; unsigned long flags, id; void __iomem *base; @@ -952,7 +954,7 @@ static int sa1111_resume(struct platform_device *dev) id = sa1111_readl(sachip->base + SA1111_SKID); if ((id & SKID_ID_MASK) != SKID_SA1111_ID) { __sa1111_remove(sachip); - platform_set_drvdata(dev, NULL); + dev_set_drvdata(dev, NULL); kfree(save); return 0; } @@ -1003,8 +1005,8 @@ static int sa1111_resume(struct platform_device *dev) } #else -#define sa1111_suspend NULL -#define sa1111_resume NULL +#define sa1111_suspend_noirq NULL +#define sa1111_resume_noirq NULL #endif static int sa1111_probe(struct platform_device *pdev) @@ -1017,7 +1019,7 @@ static int sa1111_probe(struct platform_device *pdev) return -EINVAL; irq = platform_get_irq(pdev, 0); if (irq < 0) - return -ENXIO; + return irq; return __sa1111_probe(&pdev->dev, mem, irq); } @@ -1038,6 +1040,11 @@ static int sa1111_remove(struct platform_device *pdev) return 0; } +static struct dev_pm_ops sa1111_pm_ops = { + .suspend_noirq = sa1111_suspend_noirq, + .resume_noirq = sa1111_resume_noirq, +}; + /* * Not sure if this should be on the system bus or not yet. * We really want some way to register a system device at @@ -1050,10 +1057,9 @@ static int sa1111_remove(struct platform_device *pdev) static struct platform_driver sa1111_device_driver = { .probe = sa1111_probe, .remove = sa1111_remove, - .suspend = sa1111_suspend, - .resume = sa1111_resume, .driver = { .name = "sa1111", + .pm = &sa1111_pm_ops, }, }; diff --git a/arch/arm/configs/collie_defconfig b/arch/arm/configs/collie_defconfig index 6c56ad086..52dbad561 100644 --- a/arch/arm/configs/collie_defconfig +++ b/arch/arm/configs/collie_defconfig @@ -76,7 +76,7 @@ CONFIG_LEDS_CLASS=y CONFIG_LEDS_LOCOMO=y CONFIG_LEDS_TRIGGERS=y CONFIG_LEDS_TRIGGER_TIMER=y -CONFIG_LEDS_TRIGGER_IDE_DISK=y +CONFIG_LEDS_TRIGGER_DISK=y # CONFIG_DNOTIFY is not set CONFIG_VFAT_FS=y CONFIG_TMPFS=y diff --git a/arch/arm/configs/exynos_defconfig b/arch/arm/configs/exynos_defconfig index 47195e869..01986deef 100644 --- a/arch/arm/configs/exynos_defconfig +++ b/arch/arm/configs/exynos_defconfig @@ -1,5 +1,4 @@ CONFIG_SYSVIPC=y -CONFIG_FHANDLE=y CONFIG_NO_HZ=y CONFIG_HIGH_RES_TIMERS=y CONFIG_CGROUPS=y @@ -13,8 +12,6 @@ CONFIG_ARCH_EXYNOS3=y CONFIG_EXYNOS5420_MCPM=y CONFIG_SMP=y CONFIG_BIG_LITTLE=y -CONFIG_BL_SWITCHER=y -CONFIG_BL_SWITCHER_DUMMY_IF=y CONFIG_NR_CPUS=8 CONFIG_PREEMPT=y CONFIG_AEABI=y @@ -84,9 +81,9 @@ CONFIG_INPUT_MAX77693_HAPTIC=y CONFIG_INPUT_MAX8997_HAPTIC=y CONFIG_KEYBOARD_SAMSUNG=y CONFIG_SERIAL_8250=y +CONFIG_SERIAL_OF_PLATFORM=y CONFIG_SERIAL_SAMSUNG=y CONFIG_SERIAL_SAMSUNG_CONSOLE=y -CONFIG_SERIAL_OF_PLATFORM=y CONFIG_HW_RANDOM=y CONFIG_TCG_TPM=y CONFIG_TCG_TIS_I2C_INFINEON=y @@ -112,10 +109,8 @@ CONFIG_SENSORS_LM90=y CONFIG_SENSORS_NTC_THERMISTOR=y CONFIG_SENSORS_PWM_FAN=y CONFIG_SENSORS_INA2XX=y -CONFIG_THERMAL=y CONFIG_CPU_THERMAL=y CONFIG_THERMAL_EMULATION=y -CONFIG_EXYNOS_THERMAL=y CONFIG_WATCHDOG=y CONFIG_S3C2410_WATCHDOG=y CONFIG_MFD_CROS_EC=y @@ -144,20 +139,32 @@ CONFIG_REGULATOR_TPS65090=y CONFIG_REGULATOR_WM8994=y CONFIG_MEDIA_SUPPORT=m CONFIG_MEDIA_CAMERA_SUPPORT=y +CONFIG_MEDIA_CONTROLLER=y +CONFIG_VIDEO_V4L2_SUBDEV_API=y CONFIG_MEDIA_USB_SUPPORT=y CONFIG_USB_VIDEO_CLASS=m +CONFIG_V4L_PLATFORM_DRIVERS=y +CONFIG_VIDEO_SAMSUNG_EXYNOS4_IS=m +CONFIG_VIDEO_S5P_FIMC=m +CONFIG_VIDEO_S5P_MIPI_CSIS=m +CONFIG_VIDEO_EXYNOS_FIMC_LITE=m +CONFIG_VIDEO_EXYNOS4_FIMC_IS=m +CONFIG_V4L_MEM2MEM_DRIVERS=y +CONFIG_VIDEO_SAMSUNG_S5P_JPEG=m +CONFIG_VIDEO_SAMSUNG_S5P_MFC=m +CONFIG_V4L_TEST_DRIVERS=y CONFIG_DRM=y -CONFIG_DRM_NXP_PTN3460=y -CONFIG_DRM_PARADE_PS8622=y CONFIG_DRM_EXYNOS=y CONFIG_DRM_EXYNOS_FIMD=y -CONFIG_DRM_EXYNOS_DSI=y CONFIG_DRM_EXYNOS_MIXER=y CONFIG_DRM_EXYNOS_DPI=y +CONFIG_DRM_EXYNOS_DSI=y CONFIG_DRM_EXYNOS_HDMI=y CONFIG_DRM_PANEL_SIMPLE=y CONFIG_DRM_PANEL_SAMSUNG_LD9040=y CONFIG_DRM_PANEL_SAMSUNG_S6E8AA0=y +CONFIG_DRM_NXP_PTN3460=y +CONFIG_DRM_PARADE_PS8622=y CONFIG_EXYNOS_VIDEO=y CONFIG_EXYNOS_MIPI_DSI=y CONFIG_LCD_CLASS_DEVICE=y @@ -171,7 +178,6 @@ CONFIG_SND_SOC_SAMSUNG=y CONFIG_SND_SOC_SAMSUNG_SMDK_WM8994=y CONFIG_SND_SOC_SMDK_WM8994_PCM=y CONFIG_SND_SOC_SNOW=y -CONFIG_SND_SOC_ODROIDX2=y CONFIG_SND_SIMPLE_CARD=y CONFIG_USB=y CONFIG_USB_ANNOUNCE_NEW_DEVICES=y @@ -209,7 +215,6 @@ CONFIG_RTC_DRV_S5M=y CONFIG_RTC_DRV_S3C=y CONFIG_DMADEVICES=y CONFIG_PL330_DMA=y -CONFIG_CHROME_PLATFORMS=y CONFIG_CROS_EC_CHARDEV=y CONFIG_COMMON_CLK_MAX77686=y CONFIG_COMMON_CLK_MAX77802=y @@ -227,7 +232,6 @@ CONFIG_PWM_SAMSUNG=y CONFIG_PHY_EXYNOS5250_SATA=y CONFIG_EXT2_FS=y CONFIG_EXT3_FS=y -CONFIG_EXT4_FS=y CONFIG_AUTOFS4_FS=y CONFIG_MSDOS_FS=y CONFIG_VFAT_FS=y @@ -260,3 +264,4 @@ CONFIG_CRYPTO_AES_ARM_BS=m CONFIG_CRC_CCITT=y CONFIG_FONTS=y CONFIG_FONT_7x14=y +CONFIG_VIDEO_VIVID=m diff --git a/arch/arm/configs/imx_v6_v7_defconfig b/arch/arm/configs/imx_v6_v7_defconfig index 21339ce29..3219480b9 100644 --- a/arch/arm/configs/imx_v6_v7_defconfig +++ b/arch/arm/configs/imx_v6_v7_defconfig @@ -146,7 +146,7 @@ CONFIG_MICREL_PHY=y CONFIG_USB_PEGASUS=m CONFIG_USB_RTL8150=m CONFIG_USB_RTL8152=m -CONFIG_USB_USBNET=m +CONFIG_USB_USBNET=y CONFIG_USB_NET_CDC_EEM=m CONFIG_BRCMFMAC=m CONFIG_WL12XX=m @@ -161,6 +161,7 @@ CONFIG_KEYBOARD_IMX=y CONFIG_MOUSE_PS2=m CONFIG_MOUSE_PS2_ELANTECH=y CONFIG_INPUT_TOUCHSCREEN=y +CONFIG_TOUCHSCREEN_ADS7846=y CONFIG_TOUCHSCREEN_EGALAX=y CONFIG_TOUCHSCREEN_IMX6UL_TSC=y CONFIG_TOUCHSCREEN_EDT_FT5X06=y @@ -296,6 +297,7 @@ CONFIG_USB_ZERO=m CONFIG_USB_ETH=m CONFIG_USB_G_NCM=m CONFIG_USB_GADGETFS=m +CONFIG_USB_FUNCTIONFS=m CONFIG_USB_MASS_STORAGE=m CONFIG_USB_G_SERIAL=m CONFIG_MMC=y diff --git a/arch/arm/configs/ixp4xx_defconfig b/arch/arm/configs/ixp4xx_defconfig index 24636cfdf..cf4918a2c 100644 --- a/arch/arm/configs/ixp4xx_defconfig +++ b/arch/arm/configs/ixp4xx_defconfig @@ -180,7 +180,7 @@ CONFIG_LEDS_FSG=y CONFIG_LEDS_GPIO=y CONFIG_LEDS_TRIGGERS=y CONFIG_LEDS_TRIGGER_TIMER=y -CONFIG_LEDS_TRIGGER_IDE_DISK=y +CONFIG_LEDS_TRIGGER_DISK=y CONFIG_LEDS_TRIGGER_HEARTBEAT=y CONFIG_RTC_CLASS=y CONFIG_RTC_DRV_ISL1208=y diff --git a/arch/arm/configs/keystone_defconfig b/arch/arm/configs/keystone_defconfig index faba04d93..78cd2f197 100644 --- a/arch/arm/configs/keystone_defconfig +++ b/arch/arm/configs/keystone_defconfig @@ -144,6 +144,7 @@ CONFIG_I2C_DAVINCI=y CONFIG_SPI=y CONFIG_SPI_DAVINCI=y CONFIG_SPI_SPIDEV=y +CONFIG_PINCTRL_SINGLE=y CONFIG_GPIOLIB=y CONFIG_GPIO_SYSFS=y CONFIG_GPIO_DAVINCI=y @@ -160,6 +161,7 @@ CONFIG_USB_MON=y CONFIG_USB_XHCI_HCD=y CONFIG_USB_STORAGE=y CONFIG_USB_DWC3=y +CONFIG_NOP_USB_XCEIV=y CONFIG_KEYSTONE_USB_PHY=y CONFIG_NEW_LEDS=y CONFIG_LEDS_CLASS=y diff --git a/arch/arm/configs/lpc18xx_defconfig b/arch/arm/configs/lpc18xx_defconfig index 2ae00b09c..2de1bf0e4 100644 --- a/arch/arm/configs/lpc18xx_defconfig +++ b/arch/arm/configs/lpc18xx_defconfig @@ -149,6 +149,8 @@ CONFIG_PWM=y CONFIG_PWM_LPC18XX_SCT=y CONFIG_IIO=y CONFIG_MMA7455_I2C=y +CONFIG_LPC18XX_ADC=y +CONFIG_LPC18XX_DAC=y CONFIG_IIO_SYSFS_TRIGGER=y CONFIG_PHY_LPC18XX_USB_OTG=y CONFIG_NVMEM=y diff --git a/arch/arm/configs/multi_v4t_defconfig b/arch/arm/configs/multi_v4t_defconfig new file mode 100644 index 000000000..433eebb41 --- /dev/null +++ b/arch/arm/configs/multi_v4t_defconfig @@ -0,0 +1,106 @@ +CONFIG_KERNEL_LZMA=y +CONFIG_SYSVIPC=y +CONFIG_LOG_BUF_SHIFT=14 +CONFIG_BLK_DEV_INITRD=y +CONFIG_EMBEDDED=y +CONFIG_SLOB=y +CONFIG_JUMP_LABEL=y +# CONFIG_LBDAF is not set +CONFIG_PARTITION_ADVANCED=y +# CONFIG_IOSCHED_CFQ is not set +CONFIG_ARCH_MULTI_V4T=y +# CONFIG_ARCH_MULTI_V7 is not set +CONFIG_ARCH_AT91=y +CONFIG_SOC_AT91RM9200=y +CONFIG_ARCH_CLPS711X=y +CONFIG_ARCH_INTEGRATOR=y +CONFIG_ARCH_INTEGRATOR_AP=y +CONFIG_INTEGRATOR_IMPD1=y +CONFIG_INTEGRATOR_CM720T=y +CONFIG_INTEGRATOR_CM920T=y +CONFIG_INTEGRATOR_CM922T_XA10=y +CONFIG_ARCH_MXC=y +CONFIG_MACH_SCB9328=y +CONFIG_MACH_APF9328=y +CONFIG_MACH_IMX1_DT=y +CONFIG_ARCH_NSPIRE=y +CONFIG_AEABI=y +# CONFIG_ATAGS is not set +CONFIG_ZBOOT_ROM_TEXT=0x0 +CONFIG_ZBOOT_ROM_BSS=0x0 +CONFIG_CPU_IDLE=y +CONFIG_ARM_CPUIDLE=y +CONFIG_ARM_CLPS711X_CPUIDLE=y +# CONFIG_COREDUMP is not set +CONFIG_MTD=y +CONFIG_MTD_CMDLINE_PARTS=y +CONFIG_MTD_BLOCK=y +CONFIG_MTD_CFI=y +CONFIG_MTD_JEDECPROBE=y +CONFIG_MTD_CFI_INTELEXT=y +CONFIG_MTD_CFI_AMDSTD=y +CONFIG_MTD_CFI_STAA=y +CONFIG_MTD_PLATRAM=y +CONFIG_MTD_NAND=y +CONFIG_MTD_NAND_GPIO=y +# CONFIG_INPUT is not set +# CONFIG_SERIO is not set +# CONFIG_VT is not set +CONFIG_SERIAL_CLPS711X=y +CONFIG_SERIAL_CLPS711X_CONSOLE=y +# CONFIG_HW_RANDOM is not set +CONFIG_I2C=y +CONFIG_I2C_AT91=y +CONFIG_I2C_GPIO=y +CONFIG_I2C_IMX=y +CONFIG_SPI=y +CONFIG_SPI_ATMEL=y +CONFIG_SPI_CLPS711X=y +CONFIG_SPI_GPIO=y +CONFIG_SPI_IMX=y +CONFIG_PINCTRL_AT91PIO4=y +CONFIG_GPIO_74XX_MMIO=y +CONFIG_GPIO_CLPS711X=y +CONFIG_GPIO_GENERIC_PLATFORM=y +CONFIG_GPIO_SYSCON=y +CONFIG_W1=y +CONFIG_W1_MASTER_MXC=y +CONFIG_W1_MASTER_GPIO=y +CONFIG_POWER_RESET_AT91_POWEROFF=y +CONFIG_POWER_RESET_AT91_RESET=y +CONFIG_POWER_RESET_AT91_SAMA5D2_SHDWC=y +CONFIG_POWER_RESET_GPIO=y +CONFIG_POWER_RESET_GPIO_RESTART=y +CONFIG_POWER_RESET_SYSCON=y +CONFIG_POWER_RESET_SYSCON_POWEROFF=y +# CONFIG_HWMON is not set +CONFIG_WATCHDOG=y +CONFIG_GPIO_WATCHDOG=y +CONFIG_AT91RM9200_WATCHDOG=y +CONFIG_REGULATOR=y +CONFIG_REGULATOR_FIXED_VOLTAGE=y +CONFIG_REGULATOR_GPIO=y +CONFIG_FB=y +CONFIG_FB_CLPS711X=y +CONFIG_FB_IMX=y +CONFIG_LCD_PLATFORM=y +CONFIG_BACKLIGHT_PWM=y +# CONFIG_USB_SUPPORT is not set +CONFIG_NEW_LEDS=y +CONFIG_LEDS_CLASS=y +CONFIG_LEDS_GPIO=y +CONFIG_LEDS_TRIGGERS=y +CONFIG_LEDS_TRIGGER_HEARTBEAT=y +# CONFIG_IOMMU_SUPPORT is not set +CONFIG_PWM=y +CONFIG_PWM_ATMEL=y +CONFIG_PWM_CLPS711X=y +CONFIG_PWM_IMX=y +CONFIG_EXT2_FS=y +CONFIG_MSDOS_FS=y +CONFIG_VFAT_FS=y +CONFIG_CRAMFS=y +CONFIG_MINIX_FS=y +# CONFIG_FTRACE is not set +CONFIG_DEBUG_USER=y +CONFIG_CRC_CCITT=y diff --git a/arch/arm/configs/multi_v5_defconfig b/arch/arm/configs/multi_v5_defconfig index 4f82656f7..2658b80fa 100644 --- a/arch/arm/configs/multi_v5_defconfig +++ b/arch/arm/configs/multi_v5_defconfig @@ -13,6 +13,8 @@ CONFIG_MODULE_UNLOAD=y # CONFIG_ARCH_MULTI_V7 is not set CONFIG_ARCH_MVEBU=y CONFIG_MACH_KIRKWOOD=y +CONFIG_ARCH_AT91=y +CONFIG_SOC_AT91SAM9=y CONFIG_ARCH_ASPEED=y CONFIG_MACH_ASPEED_G4=y CONFIG_ARCH_MXC=y @@ -89,8 +91,12 @@ CONFIG_MTD_CFI_INTELEXT=y CONFIG_MTD_CFI_STAA=y CONFIG_MTD_PHYSMAP=y CONFIG_MTD_NAND=y +CONFIG_MTD_NAND_ATMEL=y CONFIG_MTD_NAND_ORION=y +CONFIG_MTD_UBI=y CONFIG_BLK_DEV_LOOP=y +CONFIG_ATMEL_TCLIB=y +CONFIG_ATMEL_SSC=m CONFIG_EEPROM_AT24=y # CONFIG_SCSI_PROC_FS is not set CONFIG_BLK_DEV_SD=y @@ -102,15 +108,22 @@ CONFIG_SATA_MV=y CONFIG_NETDEVICES=y CONFIG_NET_DSA_MV88E6060=y CONFIG_NET_DSA_MV88E6XXX=y +CONFIG_MACB=y +CONFIG_DM9000=y CONFIG_MV643XX_ETH=y CONFIG_R8169=y CONFIG_MARVELL_PHY=y +CONFIG_DAVICOM_PHY=y +CONFIG_MICREL_PHY=y CONFIG_LIBERTAS=y CONFIG_LIBERTAS_SDIO=y CONFIG_MWL8K=m CONFIG_INPUT_EVDEV=y +CONFIG_KEYBOARD_QT1070=m CONFIG_KEYBOARD_GPIO=y # CONFIG_INPUT_MOUSE is not set +CONFIG_INPUT_TOUCHSCREEN=y +CONFIG_TOUCHSCREEN_ADS7846=m CONFIG_LEGACY_PTY_COUNT=16 # CONFIG_DEVKMEM is not set CONFIG_SERIAL_8250=y @@ -120,16 +133,21 @@ CONFIG_SERIAL_8250_RUNTIME_UARTS=6 CONFIG_SERIAL_8250_EXTENDED=y CONFIG_SERIAL_8250_MANY_PORTS=y CONFIG_SERIAL_OF_PLATFORM=y +CONFIG_SERIAL_ATMEL=y +CONFIG_SERIAL_ATMEL_CONSOLE=y +CONFIG_SERIAL_ATMEL_TTYAT=y CONFIG_SERIAL_IMX=y CONFIG_SERIAL_IMX_CONSOLE=y -# CONFIG_HW_RANDOM is not set +CONFIG_HW_RANDOM=y CONFIG_I2C=y # CONFIG_I2C_COMPAT is not set CONFIG_I2C_CHARDEV=y +CONFIG_I2C_AT91=y CONFIG_I2C_IMX=y CONFIG_I2C_MV64XXX=y CONFIG_I2C_NOMADIK=y CONFIG_SPI=y +CONFIG_SPI_ATMEL=y CONFIG_SPI_IMX=y CONFIG_SPI_ORION=y CONFIG_GPIO_SYSFS=y @@ -143,18 +161,36 @@ CONFIG_SENSORS_LM75=y CONFIG_SENSORS_LM85=y CONFIG_THERMAL=y CONFIG_KIRKWOOD_THERMAL=y +CONFIG_AT91SAM9X_WATCHDOG=y CONFIG_ORION_WATCHDOG=y CONFIG_IMX2_WDT=y +CONFIG_MFD_ATMEL_HLCDC=y # CONFIG_ABX500_CORE is not set CONFIG_REGULATOR=y CONFIG_REGULATOR_FIXED_VOLTAGE=y +CONFIG_MEDIA_SUPPORT=y +CONFIG_MEDIA_CAMERA_SUPPORT=y +CONFIG_V4L_PLATFORM_DRIVERS=y +CONFIG_SOC_CAMERA=y +CONFIG_VIDEO_ATMEL_ISI=m +CONFIG_SOC_CAMERA_OV2640=m +CONFIG_DRM=y +CONFIG_DRM_ATMEL_HLCDC=m +CONFIG_DRM_PANEL_SIMPLE=y CONFIG_FB=y CONFIG_FB_IMX=y +CONFIG_FB_ATMEL=y +CONFIG_BACKLIGHT_ATMEL_LCDC=y CONFIG_SOUND=y CONFIG_SND=y CONFIG_SND_SOC=y +CONFIG_SND_ATMEL_SOC=y +CONFIG_SND_AT91_SOC_SAM9G20_WM8731=m +CONFIG_SND_ATMEL_SOC_WM8904=m +CONFIG_SND_AT91_SOC_SAM9X5_WM8731=m CONFIG_SND_KIRKWOOD_SOC=y CONFIG_SND_SOC_ALC5623=y +CONFIG_SND_SOC_WM8731=y CONFIG_SND_SIMPLE_CARD=y CONFIG_HID_DRAGONRISE=y CONFIG_HID_GYRATION=y @@ -173,6 +209,7 @@ CONFIG_HID_ZEROPLUS=y CONFIG_USB=y CONFIG_USB_XHCI_HCD=y CONFIG_USB_EHCI_HCD=y +CONFIG_USB_OHCI_HCD=y CONFIG_USB_PRINTER=m CONFIG_USB_STORAGE=y CONFIG_USB_STORAGE_DATAFAB=y @@ -182,8 +219,12 @@ CONFIG_USB_STORAGE_SDDR55=y CONFIG_USB_STORAGE_JUMPSHOT=y CONFIG_USB_CHIPIDEA=y CONFIG_USB_CHIPIDEA_HOST=y +CONFIG_USB_GADGET=y +CONFIG_USB_AT91=m +CONFIG_USB_ATMEL_USBA=m CONFIG_MMC=y CONFIG_SDIO_UART=y +CONFIG_MMC_ATMELMCI=y CONFIG_MMC_MVSDIO=y CONFIG_NEW_LEDS=y CONFIG_LEDS_CLASS=y @@ -196,11 +237,21 @@ CONFIG_RTC_CLASS=y CONFIG_RTC_DRV_RS5C372=y CONFIG_RTC_DRV_PCF8563=y CONFIG_RTC_DRV_S35390A=y +CONFIG_RTC_DRV_RV3029C2=m +CONFIG_RTC_DRV_AT91RM9200=m +CONFIG_RTC_DRV_AT91SAM9=m CONFIG_RTC_DRV_MV=y CONFIG_DMADEVICES=y +CONFIG_AT_HDMAC=y CONFIG_MV_XOR=y CONFIG_STAGING=y CONFIG_FB_XGI=y +CONFIG_IIO=m +CONFIG_AT91_ADC=m +CONFIG_PWM=y +CONFIG_PWM_ATMEL=m +CONFIG_PWM_ATMEL_HLCDC_PWM=m +CONFIG_PWM_ATMEL_TCB=m CONFIG_EXT2_FS=y CONFIG_EXT3_FS=y CONFIG_ISO9660_FS=m @@ -210,6 +261,7 @@ CONFIG_MSDOS_FS=y CONFIG_VFAT_FS=y CONFIG_TMPFS=y CONFIG_JFFS2_FS=y +CONFIG_UBIFS_FS=y CONFIG_CRAMFS=y CONFIG_NFS_FS=y CONFIG_ROOT_NFS=y diff --git a/arch/arm/configs/multi_v7_defconfig b/arch/arm/configs/multi_v7_defconfig index 8a5fff1b7..ea3566fb9 100644 --- a/arch/arm/configs/multi_v7_defconfig +++ b/arch/arm/configs/multi_v7_defconfig @@ -36,6 +36,7 @@ CONFIG_ARCH_BCM_21664=y CONFIG_ARCH_BCM_281XX=y CONFIG_ARCH_BCM_5301X=y CONFIG_ARCH_BCM2835=y +CONFIG_ARCH_BCM_63XX=y CONFIG_ARCH_BRCMSTB=y CONFIG_ARCH_BERLIN=y CONFIG_MACH_BERLIN_BG2=y @@ -90,6 +91,7 @@ CONFIG_ARCH_R8A7778=y CONFIG_ARCH_R8A7779=y CONFIG_ARCH_R8A7790=y CONFIG_ARCH_R8A7791=y +CONFIG_ARCH_R8A7792=y CONFIG_ARCH_R8A7793=y CONFIG_ARCH_R8A7794=y CONFIG_ARCH_SH73A0=y @@ -157,6 +159,8 @@ CONFIG_INET6_IPCOMP=m CONFIG_IPV6_MIP6=m CONFIG_IPV6_TUNNEL=m CONFIG_IPV6_MULTIPLE_TABLES=y +CONFIG_NET_DSA=m +CONFIG_NET_SWITCHDEV=y CONFIG_CAN=y CONFIG_CAN_RAW=y CONFIG_CAN_BCM=y @@ -165,6 +169,7 @@ CONFIG_CAN_AT91=m CONFIG_CAN_RCAR=m CONFIG_CAN_XILINXCAN=y CONFIG_CAN_MCP251X=y +CONFIG_NET_DSA_BCM_SF2=m CONFIG_CAN_SUN4I=y CONFIG_BT=m CONFIG_BT_MRVL=m @@ -213,6 +218,7 @@ CONFIG_SCSI_MULTI_LUN=y CONFIG_ATA=y CONFIG_SATA_AHCI=y CONFIG_SATA_AHCI_PLATFORM=y +CONFIG_AHCI_BRCM=y CONFIG_AHCI_ST=y CONFIG_AHCI_SUNXI=y CONFIG_AHCI_TEGRA=y @@ -224,6 +230,8 @@ CONFIG_VIRTIO_NET=y CONFIG_HIX5HD2_GMAC=y CONFIG_SUN4I_EMAC=y CONFIG_MACB=y +CONFIG_BCMGENET=m +CONFIG_SYSTEMPORT=m CONFIG_NET_CALXEDA_XGMAC=y CONFIG_GIANFAR=y CONFIG_IGB=y @@ -270,6 +278,7 @@ CONFIG_MOUSE_CYAPA=m CONFIG_MOUSE_ELAN_I2C=y CONFIG_INPUT_TOUCHSCREEN=y CONFIG_TOUCHSCREEN_ATMEL_MXT=y +CONFIG_TOUCHSCREEN_MMS114=m CONFIG_TOUCHSCREEN_ST1232=m CONFIG_TOUCHSCREEN_STMPE=y CONFIG_TOUCHSCREEN_SUN4I=y @@ -292,6 +301,8 @@ CONFIG_SERIAL_AMBA_PL011_CONSOLE=y CONFIG_SERIAL_ATMEL=y CONFIG_SERIAL_ATMEL_CONSOLE=y CONFIG_SERIAL_ATMEL_TTYAT=y +CONFIG_SERIAL_BCM63XX=y +CONFIG_SERIAL_BCM63XX_CONSOLE=y CONFIG_SERIAL_MESON=y CONFIG_SERIAL_MESON_CONSOLE=y CONFIG_SERIAL_SAMSUNG=y @@ -358,6 +369,7 @@ CONFIG_SPI_BCM2835=y CONFIG_SPI_BCM2835AUX=y CONFIG_SPI_CADENCE=y CONFIG_SPI_DAVINCI=y +CONFIG_SPI_GPIO=m CONFIG_SPI_FSL_DSPI=m CONFIG_SPI_OMAP24XX=y CONFIG_SPI_ORION=y @@ -404,12 +416,14 @@ CONFIG_GPIO_PALMAS=y CONFIG_GPIO_SYSCON=y CONFIG_GPIO_TPS6586X=y CONFIG_GPIO_TPS65910=y +CONFIG_BATTERY_ACT8945A=y CONFIG_BATTERY_SBS=y CONFIG_BATTERY_MAX17040=m CONFIG_BATTERY_MAX17042=m CONFIG_CHARGER_MAX14577=m CONFIG_CHARGER_MAX77693=m CONFIG_CHARGER_MAX8997=m +CONFIG_CHARGER_MAX8998=m CONFIG_CHARGER_TPS65090=y CONFIG_AXP20X_POWER=m CONFIG_POWER_RESET_AS3722=y @@ -449,6 +463,9 @@ CONFIG_MESON_WATCHDOG=y CONFIG_DW_WATCHDOG=y CONFIG_DIGICOLOR_WATCHDOG=y CONFIG_BCM2835_WDT=y +CONFIG_BCM7038_WDT=m +CONFIG_BCM_KONA_WDT=y +CONFIG_MFD_ACT8945A=y CONFIG_MFD_AS3711=y CONFIG_MFD_AS3722=y CONFIG_MFD_ATMEL_FLEXCOM=y @@ -463,9 +480,10 @@ CONFIG_MFD_CROS_EC_SPI=m CONFIG_MFD_DA9063=m CONFIG_MFD_MAX14577=y CONFIG_MFD_MAX77686=y -CONFIG_MFD_MAX77693=y +CONFIG_MFD_MAX77693=m CONFIG_MFD_MAX8907=y CONFIG_MFD_MAX8997=y +CONFIG_MFD_MAX8998=y CONFIG_MFD_RK808=y CONFIG_MFD_PM8921_CORE=y CONFIG_MFD_QCOM_RPM=y @@ -478,6 +496,7 @@ CONFIG_MFD_TPS65217=y CONFIG_MFD_TPS65218=y CONFIG_MFD_TPS6586X=y CONFIG_MFD_TPS65910=y +CONFIG_REGULATOR_ACT8945A=y CONFIG_REGULATOR_AB8500=y CONFIG_REGULATOR_ACT8865=y CONFIG_REGULATOR_AS3711=y @@ -495,6 +514,7 @@ CONFIG_REGULATOR_MAX14577=m CONFIG_REGULATOR_MAX8907=y CONFIG_REGULATOR_MAX8973=y CONFIG_REGULATOR_MAX8997=m +CONFIG_REGULATOR_MAX8998=m CONFIG_REGULATOR_MAX77686=y CONFIG_REGULATOR_MAX77693=m CONFIG_REGULATOR_MAX77802=m @@ -515,6 +535,7 @@ CONFIG_REGULATOR_TPS6586X=y CONFIG_REGULATOR_TPS65910=y CONFIG_REGULATOR_TWL4030=y CONFIG_REGULATOR_VEXPRESS=y +CONFIG_REGULATOR_WM8994=m CONFIG_MEDIA_SUPPORT=m CONFIG_MEDIA_CAMERA_SUPPORT=y CONFIG_MEDIA_CONTROLLER=y @@ -527,9 +548,18 @@ CONFIG_SOC_CAMERA=m CONFIG_SOC_CAMERA_PLATFORM=m CONFIG_VIDEO_RCAR_VIN=m CONFIG_VIDEO_ATMEL_ISI=m +CONFIG_VIDEO_SAMSUNG_EXYNOS4_IS=m +CONFIG_VIDEO_S5P_FIMC=m +CONFIG_VIDEO_S5P_MIPI_CSIS=m +CONFIG_VIDEO_EXYNOS_FIMC_LITE=m +CONFIG_VIDEO_EXYNOS4_FIMC_IS=m CONFIG_V4L_MEM2MEM_DRIVERS=y +CONFIG_VIDEO_SAMSUNG_S5P_JPEG=m +CONFIG_VIDEO_SAMSUNG_S5P_MFC=m +CONFIG_VIDEO_STI_BDISP=m CONFIG_VIDEO_RENESAS_JPU=m CONFIG_VIDEO_RENESAS_VSP1=m +CONFIG_V4L_TEST_DRIVERS=y # CONFIG_MEDIA_SUBDRV_AUTOSELECT is not set CONFIG_VIDEO_ADV7180=m CONFIG_VIDEO_ML86V7667=m @@ -541,8 +571,10 @@ CONFIG_DRM_NXP_PTN3460=m CONFIG_DRM_PARADE_PS8622=m CONFIG_DRM_NOUVEAU=m CONFIG_DRM_EXYNOS=m -CONFIG_DRM_EXYNOS_DSI=y CONFIG_DRM_EXYNOS_FIMD=y +CONFIG_DRM_EXYNOS_MIXER=y +CONFIG_DRM_EXYNOS_DPI=y +CONFIG_DRM_EXYNOS_DSI=y CONFIG_DRM_EXYNOS_HDMI=y CONFIG_DRM_ROCKCHIP=m CONFIG_ROCKCHIP_ANALOGIX_DP=m @@ -553,9 +585,12 @@ CONFIG_DRM_ATMEL_HLCDC=m CONFIG_DRM_RCAR_DU=m CONFIG_DRM_RCAR_HDMI=y CONFIG_DRM_RCAR_LVDS=y +CONFIG_DRM_SUN4I=m CONFIG_DRM_TEGRA=y +CONFIG_DRM_PANEL_SAMSUNG_LD9040=m CONFIG_DRM_PANEL_SAMSUNG_S6E8AA0=m CONFIG_DRM_PANEL_SIMPLE=y +CONFIG_DRM_STI=m CONFIG_DRM_VC4=y CONFIG_FB_ARMCLCD=y CONFIG_FB_WM8505=y @@ -588,13 +623,14 @@ CONFIG_SND_SOC_ROCKCHIP=m CONFIG_SND_SOC_ROCKCHIP_SPDIF=m CONFIG_SND_SOC_ROCKCHIP_MAX98090=m CONFIG_SND_SOC_ROCKCHIP_RT5645=m +CONFIG_SND_SOC_SAMSUNG=m +CONFIG_SND_SOC_SAMSUNG_SMDK_WM8994=m +CONFIG_SND_SOC_SMDK_WM8994_PCM=m +CONFIG_SND_SOC_SNOW=m CONFIG_SND_SOC_SH4_FSI=m CONFIG_SND_SOC_RCAR=m CONFIG_SND_SOC_RSRC_CARD=m CONFIG_SND_SUN4I_CODEC=m -CONFIG_SND_SOC_SAMSUNG=m -CONFIG_SND_SOC_SNOW=m -CONFIG_SND_SOC_ODROIDX2=m CONFIG_SND_SOC_TEGRA=m CONFIG_SND_SOC_TEGRA_RT5640=m CONFIG_SND_SOC_TEGRA_WM8753=m @@ -700,6 +736,7 @@ CONFIG_RTC_DRV_AS3722=y CONFIG_RTC_DRV_DS1307=y CONFIG_RTC_DRV_HYM8563=m CONFIG_RTC_DRV_MAX8907=y +CONFIG_RTC_DRV_MAX8998=m CONFIG_RTC_DRV_MAX8997=m CONFIG_RTC_DRV_MAX77686=y CONFIG_RTC_DRV_RK808=m @@ -744,7 +781,7 @@ CONFIG_MXS_DMA=y CONFIG_DMA_BCM2835=y CONFIG_DMA_OMAP=y CONFIG_QCOM_BAM_DMA=y -CONFIG_XILINX_VDMA=y +CONFIG_XILINX_DMA=y CONFIG_DMA_SUN6I=y CONFIG_STAGING=y CONFIG_SENSORS_ISL29018=y @@ -791,6 +828,7 @@ CONFIG_BERLIN2_ADC=m CONFIG_EXYNOS_ADC=m CONFIG_VF610_ADC=m CONFIG_XILINX_XADC=y +CONFIG_CM36651=m CONFIG_AK8975=y CONFIG_RASPBERRYPI_POWER=y CONFIG_PWM=y @@ -807,6 +845,7 @@ CONFIG_PWM_VT8500=y CONFIG_PHY_HIX5HD2_SATA=y CONFIG_PWM_STI=y CONFIG_PWM_BCM2835=y +CONFIG_PWM_BRCMSTB=m CONFIG_OMAP_USB2=y CONFIG_TI_PIPE3=y CONFIG_PHY_BERLIN_USB=y @@ -823,6 +862,7 @@ CONFIG_PHY_SUN4I_USB=y CONFIG_PHY_SUN9I_USB=y CONFIG_PHY_SAMSUNG_USB2=m CONFIG_PHY_TEGRA_XUSB=y +CONFIG_PHY_BRCM_SATA=y CONFIG_NVMEM=y CONFIG_NVMEM_SUNXI_SID=y CONFIG_BCM2835_MBOX=y @@ -855,6 +895,7 @@ CONFIG_KEYSTONE_IRQ=y CONFIG_HW_RANDOM=y CONFIG_HW_RANDOM_ST=y CONFIG_CRYPTO_DEV_MARVELL_CESA=m +CONFIG_CRYPTO_DEV_S5P=m CONFIG_CRYPTO_DEV_SUN4I_SS=m CONFIG_CRYPTO_DEV_ROCKCHIP=m CONFIG_ARM_CRYPTO=y @@ -871,6 +912,7 @@ CONFIG_CRYPTO_GHASH_ARM_CE=m CONFIG_CRYPTO_DEV_ATMEL_AES=m CONFIG_CRYPTO_DEV_ATMEL_TDES=m CONFIG_CRYPTO_DEV_ATMEL_SHA=m +CONFIG_VIDEO_VIVID=m CONFIG_VIRTIO=y CONFIG_VIRTIO_PCI=y CONFIG_VIRTIO_PCI_LEGACY=y diff --git a/arch/arm/configs/omap2plus_defconfig b/arch/arm/configs/omap2plus_defconfig index ac717cccd..487c6c3b1 100644 --- a/arch/arm/configs/omap2plus_defconfig +++ b/arch/arm/configs/omap2plus_defconfig @@ -355,11 +355,13 @@ CONFIG_USB_OHCI_HCD=m CONFIG_USB_WDM=m CONFIG_USB_STORAGE=m CONFIG_USB_MUSB_HDRC=m +CONFIG_USB_MUSB_TUSB6010=m CONFIG_USB_MUSB_OMAP2PLUS=m CONFIG_USB_MUSB_AM35X=m CONFIG_USB_MUSB_DSPS=m CONFIG_USB_INVENTRA_DMA=y CONFIG_USB_TI_CPPI41_DMA=y +CONFIG_USB_TUSB_OMAP_DMA=y CONFIG_USB_DWC3=m CONFIG_USB_SERIAL=m CONFIG_USB_SERIAL_GENERIC=y @@ -367,7 +369,8 @@ CONFIG_USB_SERIAL_SIMPLE=m CONFIG_USB_SERIAL_FTDI_SIO=m CONFIG_USB_SERIAL_PL2303=m CONFIG_USB_TEST=m -CONFIG_AM335X_PHY_USB=y +CONFIG_NOP_USB_XCEIV=m +CONFIG_AM335X_PHY_USB=m CONFIG_TWL6030_USB=m CONFIG_USB_GADGET=m CONFIG_USB_GADGET_DEBUG=y diff --git a/arch/arm/configs/qcom_defconfig b/arch/arm/configs/qcom_defconfig index 7bff7bf24..c2dff4fd5 100644 --- a/arch/arm/configs/qcom_defconfig +++ b/arch/arm/configs/qcom_defconfig @@ -23,6 +23,7 @@ CONFIG_ARCH_QCOM=y CONFIG_ARCH_MSM8X60=y CONFIG_ARCH_MSM8960=y CONFIG_ARCH_MSM8974=y +CONFIG_ARCH_MDM9615=y CONFIG_SMP=y CONFIG_HAVE_ARM_ARCH_TIMER=y CONFIG_PREEMPT=y @@ -94,6 +95,7 @@ CONFIG_SERIO_LIBPS2=y CONFIG_SERIAL_MSM=y CONFIG_SERIAL_MSM_CONSOLE=y CONFIG_HW_RANDOM=y +CONFIG_HW_RANDOM_MSM=y CONFIG_I2C=y CONFIG_I2C_CHARDEV=y CONFIG_I2C_QUP=y @@ -103,7 +105,9 @@ CONFIG_SPMI=y CONFIG_PINCTRL_APQ8064=y CONFIG_PINCTRL_APQ8084=y CONFIG_PINCTRL_IPQ8064=y +CONFIG_PINCTRL_MSM8660=y CONFIG_PINCTRL_MSM8960=y +CONFIG_PINCTRL_MDM9615=y CONFIG_PINCTRL_MSM8X74=y CONFIG_PINCTRL_QCOM_SPMI_PMIC=y CONFIG_PINCTRL_QCOM_SSBI_PMIC=y @@ -114,6 +118,7 @@ CONFIG_CHARGER_QCOM_SMBB=y CONFIG_POWER_RESET=y CONFIG_POWER_RESET_MSM=y CONFIG_THERMAL=y +CONFIG_MFD_PM8XXX=y CONFIG_MFD_PM8921_CORE=y CONFIG_MFD_QCOM_RPM=y CONFIG_MFD_SPMI_PMIC=y @@ -143,6 +148,7 @@ CONFIG_USB_GADGET_VBUS_DRAW=500 CONFIG_MMC=y CONFIG_MMC_BLOCK_MINORS=32 CONFIG_MMC_ARMMMCI=y +CONFIG_MMC_QCOM_DML=y CONFIG_MMC_SDHCI=y CONFIG_MMC_SDHCI_PLTFM=y CONFIG_MMC_SDHCI_MSM=y @@ -156,6 +162,8 @@ CONFIG_APQ_MMCC_8084=y CONFIG_IPQ_LCC_806X=y CONFIG_MSM_GCC_8660=y CONFIG_MSM_LCC_8960=y +CONFIG_MSM_GCC_9615=y +CONFIG_MSM_LCC_9615=y CONFIG_MSM_MMCC_8960=y CONFIG_MSM_MMCC_8974=y CONFIG_HWSPINLOCK_QCOM=y diff --git a/arch/arm/configs/sama5_defconfig b/arch/arm/configs/sama5_defconfig index 9cb1a85bb..aca8625b6 100644 --- a/arch/arm/configs/sama5_defconfig +++ b/arch/arm/configs/sama5_defconfig @@ -129,16 +129,19 @@ CONFIG_SPI_ATMEL=y CONFIG_SPI_GPIO=y CONFIG_GPIO_SYSFS=y CONFIG_POWER_SUPPLY=y +CONFIG_BATTERY_ACT8945A=y CONFIG_POWER_RESET=y # CONFIG_HWMON is not set CONFIG_WATCHDOG=y CONFIG_AT91SAM9X_WATCHDOG=y CONFIG_SAMA5D4_WATCHDOG=y +CONFIG_MFD_ACT8945A=y CONFIG_MFD_ATMEL_FLEXCOM=y CONFIG_MFD_ATMEL_HLCDC=y CONFIG_REGULATOR=y CONFIG_REGULATOR_FIXED_VOLTAGE=y CONFIG_REGULATOR_ACT8865=y +CONFIG_REGULATOR_ACT8945A=y CONFIG_MEDIA_SUPPORT=y CONFIG_MEDIA_CAMERA_SUPPORT=y CONFIG_V4L_PLATFORM_DRIVERS=y diff --git a/arch/arm/configs/shmobile_defconfig b/arch/arm/configs/shmobile_defconfig index f2d635566..baa07a46a 100644 --- a/arch/arm/configs/shmobile_defconfig +++ b/arch/arm/configs/shmobile_defconfig @@ -17,6 +17,7 @@ CONFIG_ARCH_R8A7778=y CONFIG_ARCH_R8A7779=y CONFIG_ARCH_R8A7790=y CONFIG_ARCH_R8A7791=y +CONFIG_ARCH_R8A7792=y CONFIG_ARCH_R8A7793=y CONFIG_ARCH_R8A7794=y CONFIG_ARCH_SH73A0=y diff --git a/arch/arm/configs/socfpga_defconfig b/arch/arm/configs/socfpga_defconfig index 753f1a5de..9f84be5b3 100644 --- a/arch/arm/configs/socfpga_defconfig +++ b/arch/arm/configs/socfpga_defconfig @@ -1,5 +1,4 @@ CONFIG_SYSVIPC=y -CONFIG_FHANDLE=y CONFIG_HIGH_RES_TIMERS=y CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y @@ -19,6 +18,10 @@ CONFIG_MODULE_UNLOAD=y # CONFIG_IOSCHED_CFQ is not set CONFIG_ARCH_SOCFPGA=y CONFIG_ARM_THUMBEE=y +CONFIG_PCI=y +CONFIG_PCI_MSI=y +CONFIG_PCIE_ALTERA=y +CONFIG_PCIE_ALTERA_MSI=y CONFIG_SMP=y CONFIG_NR_CPUS=2 CONFIG_AEABI=y @@ -50,15 +53,21 @@ CONFIG_DEVTMPFS_MOUNT=y CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=2 CONFIG_BLK_DEV_RAM_SIZE=8192 +CONFIG_BLK_DEV_NVME=m CONFIG_SRAM=y CONFIG_SCSI=y # CONFIG_SCSI_PROC_FS is not set CONFIG_BLK_DEV_SD=y # CONFIG_SCSI_LOWLEVEL is not set CONFIG_NETDEVICES=y +CONFIG_E1000E=m +CONFIG_IGB=m +CONFIG_IXGBE=m CONFIG_STMMAC_ETH=y CONFIG_MICREL_PHY=y CONFIG_INPUT_EVDEV=y +CONFIG_INPUT_TOUCHSCREEN=y +CONFIG_TOUCHSCREEN_STMPE=y # CONFIG_SERIO_SERPORT is not set CONFIG_SERIO_AMBAKMI=y CONFIG_LEGACY_PTY_COUNT=16 @@ -78,14 +87,19 @@ CONFIG_SENSORS_LTC2978=y CONFIG_SENSORS_LTC2978_REGULATOR=y CONFIG_WATCHDOG=y CONFIG_DW_WATCHDOG=y +CONFIG_MFD_STMPE=y CONFIG_REGULATOR=y CONFIG_REGULATOR_FIXED_VOLTAGE=y CONFIG_USB=y +CONFIG_USB_STORAGE=y CONFIG_USB_DWC2=y CONFIG_NOP_USB_XCEIV=y CONFIG_USB_GADGET=y CONFIG_MMC=y CONFIG_MMC_DW=y +CONFIG_DMADEVICES=y +CONFIG_PL330_DMA=y +CONFIG_DMATEST=m CONFIG_FPGA=y CONFIG_FPGA_MGR_SOCFPGA=y CONFIG_EXT2_FS=y diff --git a/arch/arm/configs/sunxi_defconfig b/arch/arm/configs/sunxi_defconfig index 81a1b92fd..714da336e 100644 --- a/arch/arm/configs/sunxi_defconfig +++ b/arch/arm/configs/sunxi_defconfig @@ -97,6 +97,8 @@ CONFIG_MEDIA_SUPPORT=y CONFIG_MEDIA_RC_SUPPORT=y CONFIG_RC_DEVICES=y CONFIG_IR_SUNXI=y +CONFIG_DRM=y +CONFIG_DRM_SUN4I=y CONFIG_FB=y CONFIG_FB_SIMPLE=y CONFIG_FRAMEBUFFER_CONSOLE=y diff --git a/arch/arm/crypto/ghash-ce-glue.c b/arch/arm/crypto/ghash-ce-glue.c index 03a39fe29..1568cb5cd 100644 --- a/arch/arm/crypto/ghash-ce-glue.c +++ b/arch/arm/crypto/ghash-ce-glue.c @@ -154,30 +154,23 @@ static int ghash_async_init(struct ahash_request *req) struct ghash_async_ctx *ctx = crypto_ahash_ctx(tfm); struct ahash_request *cryptd_req = ahash_request_ctx(req); struct cryptd_ahash *cryptd_tfm = ctx->cryptd_tfm; + struct shash_desc *desc = cryptd_shash_desc(cryptd_req); + struct crypto_shash *child = cryptd_ahash_child(cryptd_tfm); - if (!may_use_simd()) { - memcpy(cryptd_req, req, sizeof(*req)); - ahash_request_set_tfm(cryptd_req, &cryptd_tfm->base); - return crypto_ahash_init(cryptd_req); - } else { - struct shash_desc *desc = cryptd_shash_desc(cryptd_req); - struct crypto_shash *child = cryptd_ahash_child(cryptd_tfm); - - desc->tfm = child; - desc->flags = req->base.flags; - return crypto_shash_init(desc); - } + desc->tfm = child; + desc->flags = req->base.flags; + return crypto_shash_init(desc); } static int ghash_async_update(struct ahash_request *req) { struct ahash_request *cryptd_req = ahash_request_ctx(req); + struct crypto_ahash *tfm = crypto_ahash_reqtfm(req); + struct ghash_async_ctx *ctx = crypto_ahash_ctx(tfm); + struct cryptd_ahash *cryptd_tfm = ctx->cryptd_tfm; - if (!may_use_simd()) { - struct crypto_ahash *tfm = crypto_ahash_reqtfm(req); - struct ghash_async_ctx *ctx = crypto_ahash_ctx(tfm); - struct cryptd_ahash *cryptd_tfm = ctx->cryptd_tfm; - + if (!may_use_simd() || + (in_atomic() && cryptd_ahash_queued(cryptd_tfm))) { memcpy(cryptd_req, req, sizeof(*req)); ahash_request_set_tfm(cryptd_req, &cryptd_tfm->base); return crypto_ahash_update(cryptd_req); @@ -190,12 +183,12 @@ static int ghash_async_update(struct ahash_request *req) static int ghash_async_final(struct ahash_request *req) { struct ahash_request *cryptd_req = ahash_request_ctx(req); + struct crypto_ahash *tfm = crypto_ahash_reqtfm(req); + struct ghash_async_ctx *ctx = crypto_ahash_ctx(tfm); + struct cryptd_ahash *cryptd_tfm = ctx->cryptd_tfm; - if (!may_use_simd()) { - struct crypto_ahash *tfm = crypto_ahash_reqtfm(req); - struct ghash_async_ctx *ctx = crypto_ahash_ctx(tfm); - struct cryptd_ahash *cryptd_tfm = ctx->cryptd_tfm; - + if (!may_use_simd() || + (in_atomic() && cryptd_ahash_queued(cryptd_tfm))) { memcpy(cryptd_req, req, sizeof(*req)); ahash_request_set_tfm(cryptd_req, &cryptd_tfm->base); return crypto_ahash_final(cryptd_req); @@ -212,7 +205,8 @@ static int ghash_async_digest(struct ahash_request *req) struct ahash_request *cryptd_req = ahash_request_ctx(req); struct cryptd_ahash *cryptd_tfm = ctx->cryptd_tfm; - if (!may_use_simd()) { + if (!may_use_simd() || + (in_atomic() && cryptd_ahash_queued(cryptd_tfm))) { memcpy(cryptd_req, req, sizeof(*req)); ahash_request_set_tfm(cryptd_req, &cryptd_tfm->base); return crypto_ahash_digest(cryptd_req); diff --git a/arch/arm/include/asm/assembler.h b/arch/arm/include/asm/assembler.h index b2bc8e114..4eaea2173 100644 --- a/arch/arm/include/asm/assembler.h +++ b/arch/arm/include/asm/assembler.h @@ -480,13 +480,13 @@ THUMB( orr \reg , \reg , #PSR_T_BIT ) .macro uaccess_save, tmp #ifdef CONFIG_CPU_SW_DOMAIN_PAN mrc p15, 0, \tmp, c3, c0, 0 - str \tmp, [sp, #S_FRAME_SIZE] + str \tmp, [sp, #SVC_DACR] #endif .endm .macro uaccess_restore #ifdef CONFIG_CPU_SW_DOMAIN_PAN - ldr r0, [sp, #S_FRAME_SIZE] + ldr r0, [sp, #SVC_DACR] mcr p15, 0, r0, c3, c0, 0 #endif .endm diff --git a/arch/arm/include/asm/atomic.h b/arch/arm/include/asm/atomic.h index 9e10c4567..66d0e215a 100644 --- a/arch/arm/include/asm/atomic.h +++ b/arch/arm/include/asm/atomic.h @@ -77,8 +77,36 @@ static inline int atomic_##op##_return_relaxed(int i, atomic_t *v) \ return result; \ } +#define ATOMIC_FETCH_OP(op, c_op, asm_op) \ +static inline int atomic_fetch_##op##_relaxed(int i, atomic_t *v) \ +{ \ + unsigned long tmp; \ + int result, val; \ + \ + prefetchw(&v->counter); \ + \ + __asm__ __volatile__("@ atomic_fetch_" #op "\n" \ +"1: ldrex %0, [%4]\n" \ +" " #asm_op " %1, %0, %5\n" \ +" strex %2, %1, [%4]\n" \ +" teq %2, #0\n" \ +" bne 1b" \ + : "=&r" (result), "=&r" (val), "=&r" (tmp), "+Qo" (v->counter) \ + : "r" (&v->counter), "Ir" (i) \ + : "cc"); \ + \ + return result; \ +} + #define atomic_add_return_relaxed atomic_add_return_relaxed #define atomic_sub_return_relaxed atomic_sub_return_relaxed +#define atomic_fetch_add_relaxed atomic_fetch_add_relaxed +#define atomic_fetch_sub_relaxed atomic_fetch_sub_relaxed + +#define atomic_fetch_and_relaxed atomic_fetch_and_relaxed +#define atomic_fetch_andnot_relaxed atomic_fetch_andnot_relaxed +#define atomic_fetch_or_relaxed atomic_fetch_or_relaxed +#define atomic_fetch_xor_relaxed atomic_fetch_xor_relaxed static inline int atomic_cmpxchg_relaxed(atomic_t *ptr, int old, int new) { @@ -159,6 +187,20 @@ static inline int atomic_##op##_return(int i, atomic_t *v) \ return val; \ } +#define ATOMIC_FETCH_OP(op, c_op, asm_op) \ +static inline int atomic_fetch_##op(int i, atomic_t *v) \ +{ \ + unsigned long flags; \ + int val; \ + \ + raw_local_irq_save(flags); \ + val = v->counter; \ + v->counter c_op i; \ + raw_local_irq_restore(flags); \ + \ + return val; \ +} + static inline int atomic_cmpxchg(atomic_t *v, int old, int new) { int ret; @@ -187,19 +229,26 @@ static inline int __atomic_add_unless(atomic_t *v, int a, int u) #define ATOMIC_OPS(op, c_op, asm_op) \ ATOMIC_OP(op, c_op, asm_op) \ - ATOMIC_OP_RETURN(op, c_op, asm_op) + ATOMIC_OP_RETURN(op, c_op, asm_op) \ + ATOMIC_FETCH_OP(op, c_op, asm_op) ATOMIC_OPS(add, +=, add) ATOMIC_OPS(sub, -=, sub) #define atomic_andnot atomic_andnot -ATOMIC_OP(and, &=, and) -ATOMIC_OP(andnot, &= ~, bic) -ATOMIC_OP(or, |=, orr) -ATOMIC_OP(xor, ^=, eor) +#undef ATOMIC_OPS +#define ATOMIC_OPS(op, c_op, asm_op) \ + ATOMIC_OP(op, c_op, asm_op) \ + ATOMIC_FETCH_OP(op, c_op, asm_op) + +ATOMIC_OPS(and, &=, and) +ATOMIC_OPS(andnot, &= ~, bic) +ATOMIC_OPS(or, |=, orr) +ATOMIC_OPS(xor, ^=, eor) #undef ATOMIC_OPS +#undef ATOMIC_FETCH_OP #undef ATOMIC_OP_RETURN #undef ATOMIC_OP @@ -317,24 +366,61 @@ atomic64_##op##_return_relaxed(long long i, atomic64_t *v) \ return result; \ } +#define ATOMIC64_FETCH_OP(op, op1, op2) \ +static inline long long \ +atomic64_fetch_##op##_relaxed(long long i, atomic64_t *v) \ +{ \ + long long result, val; \ + unsigned long tmp; \ + \ + prefetchw(&v->counter); \ + \ + __asm__ __volatile__("@ atomic64_fetch_" #op "\n" \ +"1: ldrexd %0, %H0, [%4]\n" \ +" " #op1 " %Q1, %Q0, %Q5\n" \ +" " #op2 " %R1, %R0, %R5\n" \ +" strexd %2, %1, %H1, [%4]\n" \ +" teq %2, #0\n" \ +" bne 1b" \ + : "=&r" (result), "=&r" (val), "=&r" (tmp), "+Qo" (v->counter) \ + : "r" (&v->counter), "r" (i) \ + : "cc"); \ + \ + return result; \ +} + #define ATOMIC64_OPS(op, op1, op2) \ ATOMIC64_OP(op, op1, op2) \ - ATOMIC64_OP_RETURN(op, op1, op2) + ATOMIC64_OP_RETURN(op, op1, op2) \ + ATOMIC64_FETCH_OP(op, op1, op2) ATOMIC64_OPS(add, adds, adc) ATOMIC64_OPS(sub, subs, sbc) #define atomic64_add_return_relaxed atomic64_add_return_relaxed #define atomic64_sub_return_relaxed atomic64_sub_return_relaxed +#define atomic64_fetch_add_relaxed atomic64_fetch_add_relaxed +#define atomic64_fetch_sub_relaxed atomic64_fetch_sub_relaxed + +#undef ATOMIC64_OPS +#define ATOMIC64_OPS(op, op1, op2) \ + ATOMIC64_OP(op, op1, op2) \ + ATOMIC64_FETCH_OP(op, op1, op2) #define atomic64_andnot atomic64_andnot -ATOMIC64_OP(and, and, and) -ATOMIC64_OP(andnot, bic, bic) -ATOMIC64_OP(or, orr, orr) -ATOMIC64_OP(xor, eor, eor) +ATOMIC64_OPS(and, and, and) +ATOMIC64_OPS(andnot, bic, bic) +ATOMIC64_OPS(or, orr, orr) +ATOMIC64_OPS(xor, eor, eor) + +#define atomic64_fetch_and_relaxed atomic64_fetch_and_relaxed +#define atomic64_fetch_andnot_relaxed atomic64_fetch_andnot_relaxed +#define atomic64_fetch_or_relaxed atomic64_fetch_or_relaxed +#define atomic64_fetch_xor_relaxed atomic64_fetch_xor_relaxed #undef ATOMIC64_OPS +#undef ATOMIC64_FETCH_OP #undef ATOMIC64_OP_RETURN #undef ATOMIC64_OP diff --git a/arch/arm/include/asm/barrier.h b/arch/arm/include/asm/barrier.h index 112cc1a5d..f5d698182 100644 --- a/arch/arm/include/asm/barrier.h +++ b/arch/arm/include/asm/barrier.h @@ -44,9 +44,7 @@ extern void arm_heavy_mb(void); #define __arm_heavy_mb(x...) dsb(x) #endif -#ifdef CONFIG_ARCH_HAS_BARRIERS -#include <mach/barriers.h> -#elif defined(CONFIG_ARM_DMA_MEM_BUFFERABLE) || defined(CONFIG_SMP) +#if defined(CONFIG_ARM_DMA_MEM_BUFFERABLE) || defined(CONFIG_SMP) #define mb() __arm_heavy_mb() #define rmb() dsb() #define wmb() __arm_heavy_mb(st) diff --git a/arch/arm/include/asm/delay.h b/arch/arm/include/asm/delay.h index dff714d88..b1ce037e4 100644 --- a/arch/arm/include/asm/delay.h +++ b/arch/arm/include/asm/delay.h @@ -10,8 +10,8 @@ #include <asm/param.h> /* HZ */ #define MAX_UDELAY_MS 2 -#define UDELAY_MULT ((UL(2199023) * HZ) >> 11) -#define UDELAY_SHIFT 30 +#define UDELAY_MULT UL(2147 * HZ + 483648 * HZ / 1000000) +#define UDELAY_SHIFT 31 #ifndef __ASSEMBLY__ @@ -34,7 +34,7 @@ extern struct arm_delay_ops { * it, it means that you're calling udelay() with an out of range value. * * With currently imposed limits, this means that we support a max delay - * of 2000us. Further limits: HZ<=1000 and bogomips<=3355 + * of 2000us. Further limits: HZ<=1000 */ extern void __bad_udelay(void); diff --git a/arch/arm/include/asm/dma-mapping.h b/arch/arm/include/asm/dma-mapping.h index a83570f10..bf02dbd9c 100644 --- a/arch/arm/include/asm/dma-mapping.h +++ b/arch/arm/include/asm/dma-mapping.h @@ -5,7 +5,6 @@ #include <linux/mm_types.h> #include <linux/scatterlist.h> -#include <linux/dma-attrs.h> #include <linux/dma-debug.h> #include <asm/memory.h> @@ -112,7 +111,7 @@ static inline dma_addr_t virt_to_dma(struct device *dev, void *addr) /* The ARM override for dma_max_pfn() */ static inline unsigned long dma_max_pfn(struct device *dev) { - return PHYS_PFN_OFFSET + dma_to_pfn(dev, *dev->dma_mask); + return dma_to_pfn(dev, *dev->dma_mask); } #define dma_max_pfn(dev) dma_max_pfn(dev) @@ -174,7 +173,7 @@ static inline void dma_mark_clean(void *addr, size_t size) { } * to be the device-viewed address. */ extern void *arm_dma_alloc(struct device *dev, size_t size, dma_addr_t *handle, - gfp_t gfp, struct dma_attrs *attrs); + gfp_t gfp, unsigned long attrs); /** * arm_dma_free - free memory allocated by arm_dma_alloc @@ -191,7 +190,7 @@ extern void *arm_dma_alloc(struct device *dev, size_t size, dma_addr_t *handle, * during and after this call executing are illegal. */ extern void arm_dma_free(struct device *dev, size_t size, void *cpu_addr, - dma_addr_t handle, struct dma_attrs *attrs); + dma_addr_t handle, unsigned long attrs); /** * arm_dma_mmap - map a coherent DMA allocation into user space @@ -208,7 +207,7 @@ extern void arm_dma_free(struct device *dev, size_t size, void *cpu_addr, */ extern int arm_dma_mmap(struct device *dev, struct vm_area_struct *vma, void *cpu_addr, dma_addr_t dma_addr, size_t size, - struct dma_attrs *attrs); + unsigned long attrs); /* * This can be called during early boot to increase the size of the atomic @@ -262,16 +261,16 @@ extern void dmabounce_unregister_dev(struct device *); * The scatter list versions of the above methods. */ extern int arm_dma_map_sg(struct device *, struct scatterlist *, int, - enum dma_data_direction, struct dma_attrs *attrs); + enum dma_data_direction, unsigned long attrs); extern void arm_dma_unmap_sg(struct device *, struct scatterlist *, int, - enum dma_data_direction, struct dma_attrs *attrs); + enum dma_data_direction, unsigned long attrs); extern void arm_dma_sync_sg_for_cpu(struct device *, struct scatterlist *, int, enum dma_data_direction); extern void arm_dma_sync_sg_for_device(struct device *, struct scatterlist *, int, enum dma_data_direction); extern int arm_dma_get_sgtable(struct device *dev, struct sg_table *sgt, void *cpu_addr, dma_addr_t dma_addr, size_t size, - struct dma_attrs *attrs); + unsigned long attrs); #endif /* __KERNEL__ */ #endif diff --git a/arch/arm/include/asm/efi.h b/arch/arm/include/asm/efi.h index a708fa1f0..766bf9b78 100644 --- a/arch/arm/include/asm/efi.h +++ b/arch/arm/include/asm/efi.h @@ -28,10 +28,10 @@ int efi_set_mapping_permissions(struct mm_struct *mm, efi_memory_desc_t *md); #define arch_efi_call_virt_setup() efi_virtmap_load() #define arch_efi_call_virt_teardown() efi_virtmap_unload() -#define arch_efi_call_virt(f, args...) \ +#define arch_efi_call_virt(p, f, args...) \ ({ \ efi_##f##_t *__f; \ - __f = efi.systab->runtime->f; \ + __f = p->f; \ __f(args); \ }) diff --git a/arch/arm/include/asm/floppy.h b/arch/arm/include/asm/floppy.h index f4882553f..85a34cc83 100644 --- a/arch/arm/include/asm/floppy.h +++ b/arch/arm/include/asm/floppy.h @@ -17,7 +17,7 @@ #define fd_outb(val,port) \ do { \ - if ((port) == FD_DOR) \ + if ((port) == (u32)FD_DOR) \ fd_setdor((val)); \ else \ outb((val),(port)); \ diff --git a/arch/arm/include/asm/io.h b/arch/arm/include/asm/io.h index 781ef5fe2..021692c64 100644 --- a/arch/arm/include/asm/io.h +++ b/arch/arm/include/asm/io.h @@ -282,7 +282,7 @@ extern void _memset_io(volatile void __iomem *, int, size_t); * These perform PCI memory accesses via an ioremap region. They don't * take an address as such, but a cookie. * - * Again, this are defined to perform little endian accesses. See the + * Again, these are defined to perform little endian accesses. See the * IO port primitives for more information. */ #ifndef readl diff --git a/arch/arm/include/asm/kexec.h b/arch/arm/include/asm/kexec.h index c2b9b4bde..1869af6ba 100644 --- a/arch/arm/include/asm/kexec.h +++ b/arch/arm/include/asm/kexec.h @@ -53,6 +53,30 @@ static inline void crash_setup_regs(struct pt_regs *newregs, /* Function pointer to optional machine-specific reinitialization */ extern void (*kexec_reinit)(void); +static inline unsigned long phys_to_boot_phys(phys_addr_t phys) +{ + return phys_to_idmap(phys); +} +#define phys_to_boot_phys phys_to_boot_phys + +static inline phys_addr_t boot_phys_to_phys(unsigned long entry) +{ + return idmap_to_phys(entry); +} +#define boot_phys_to_phys boot_phys_to_phys + +static inline unsigned long page_to_boot_pfn(struct page *page) +{ + return page_to_pfn(page) + (arch_phys_to_idmap_offset >> PAGE_SHIFT); +} +#define page_to_boot_pfn page_to_boot_pfn + +static inline struct page *boot_pfn_to_page(unsigned long boot_pfn) +{ + return pfn_to_page(boot_pfn - (arch_phys_to_idmap_offset >> PAGE_SHIFT)); +} +#define boot_pfn_to_page boot_pfn_to_page + #endif /* __ASSEMBLY__ */ #endif /* CONFIG_KEXEC */ diff --git a/arch/arm/include/asm/kvm_asm.h b/arch/arm/include/asm/kvm_asm.h index 3d5a5cd07..58faff5f1 100644 --- a/arch/arm/include/asm/kvm_asm.h +++ b/arch/arm/include/asm/kvm_asm.h @@ -66,6 +66,8 @@ extern void __kvm_tlb_flush_vmid(struct kvm *kvm); extern int __kvm_vcpu_run(struct kvm_vcpu *vcpu); extern void __init_stage2_translation(void); + +extern void __kvm_hyp_reset(unsigned long); #endif #endif /* __ARM_KVM_ASM_H__ */ diff --git a/arch/arm/include/asm/kvm_host.h b/arch/arm/include/asm/kvm_host.h index 96387d477..de338d93d 100644 --- a/arch/arm/include/asm/kvm_host.h +++ b/arch/arm/include/asm/kvm_host.h @@ -241,8 +241,7 @@ int kvm_arm_coproc_set_reg(struct kvm_vcpu *vcpu, const struct kvm_one_reg *); int handle_exit(struct kvm_vcpu *vcpu, struct kvm_run *run, int exception_index); -static inline void __cpu_init_hyp_mode(phys_addr_t boot_pgd_ptr, - phys_addr_t pgd_ptr, +static inline void __cpu_init_hyp_mode(phys_addr_t pgd_ptr, unsigned long hyp_stack_ptr, unsigned long vector_ptr) { @@ -251,18 +250,13 @@ static inline void __cpu_init_hyp_mode(phys_addr_t boot_pgd_ptr, * code. The init code doesn't need to preserve these * registers as r0-r3 are already callee saved according to * the AAPCS. - * Note that we slightly misuse the prototype by casing the + * Note that we slightly misuse the prototype by casting the * stack pointer to a void *. - * - * We don't have enough registers to perform the full init in - * one go. Install the boot PGD first, and then install the - * runtime PGD, stack pointer and vectors. The PGDs are always - * passed as the third argument, in order to be passed into - * r2-r3 to the init code (yes, this is compliant with the - * PCS!). - */ - kvm_call_hyp(NULL, 0, boot_pgd_ptr); + * The PGDs are always passed as the third argument, in order + * to be passed into r2-r3 to the init code (yes, this is + * compliant with the PCS!). + */ kvm_call_hyp((void*)hyp_stack_ptr, vector_ptr, pgd_ptr); } @@ -272,16 +266,13 @@ static inline void __cpu_init_stage2(void) kvm_call_hyp(__init_stage2_translation); } -static inline void __cpu_reset_hyp_mode(phys_addr_t boot_pgd_ptr, +static inline void __cpu_reset_hyp_mode(unsigned long vector_ptr, phys_addr_t phys_idmap_start) { - /* - * TODO - * kvm_call_reset(boot_pgd_ptr, phys_idmap_start); - */ + kvm_call_hyp((void *)virt_to_idmap(__kvm_hyp_reset), vector_ptr); } -static inline int kvm_arch_dev_ioctl_check_extension(long ext) +static inline int kvm_arch_dev_ioctl_check_extension(struct kvm *kvm, long ext) { return 0; } diff --git a/arch/arm/include/asm/kvm_hyp.h b/arch/arm/include/asm/kvm_hyp.h index f0e860761..6eaff28f2 100644 --- a/arch/arm/include/asm/kvm_hyp.h +++ b/arch/arm/include/asm/kvm_hyp.h @@ -25,9 +25,6 @@ #define __hyp_text __section(.hyp.text) notrace -#define kern_hyp_va(v) (v) -#define hyp_kern_va(v) (v) - #define __ACCESS_CP15(CRn, Op1, CRm, Op2) \ "mrc", "mcr", __stringify(p15, Op1, %0, CRn, CRm, Op2), u32 #define __ACCESS_CP15_64(Op1, CRm) \ diff --git a/arch/arm/include/asm/kvm_mmu.h b/arch/arm/include/asm/kvm_mmu.h index f9a650611..3bb803d68 100644 --- a/arch/arm/include/asm/kvm_mmu.h +++ b/arch/arm/include/asm/kvm_mmu.h @@ -26,16 +26,7 @@ * We directly use the kernel VA for the HYP, as we can directly share * the mapping (HTTBR "covers" TTBR1). */ -#define HYP_PAGE_OFFSET_MASK UL(~0) -#define HYP_PAGE_OFFSET PAGE_OFFSET -#define KERN_TO_HYP(kva) (kva) - -/* - * Our virtual mapping for the boot-time MMU-enable code. Must be - * shared across all the page-tables. Conveniently, we use the vectors - * page, where no kernel data will ever be shared with HYP. - */ -#define TRAMPOLINE_VA UL(CONFIG_VECTORS_BASE) +#define kern_hyp_va(kva) (kva) /* * KVM_MMU_CACHE_MIN_PAGES is the number of stage2 page table translation levels. @@ -49,9 +40,8 @@ #include <asm/pgalloc.h> #include <asm/stage2_pgtable.h> -int create_hyp_mappings(void *from, void *to); +int create_hyp_mappings(void *from, void *to, pgprot_t prot); int create_hyp_io_mappings(void *from, void *to, phys_addr_t); -void free_boot_hyp_pgd(void); void free_hyp_pgds(void); void stage2_unmap_vm(struct kvm *kvm); @@ -65,7 +55,6 @@ int kvm_handle_guest_abort(struct kvm_vcpu *vcpu, struct kvm_run *run); void kvm_mmu_free_memory_caches(struct kvm_vcpu *vcpu); phys_addr_t kvm_mmu_get_httbr(void); -phys_addr_t kvm_mmu_get_boot_httbr(void); phys_addr_t kvm_get_idmap_vector(void); phys_addr_t kvm_get_idmap_start(void); int kvm_mmu_init(void); diff --git a/arch/arm/include/asm/mach/pci.h b/arch/arm/include/asm/mach/pci.h index 0070e8520..2d88af5be 100644 --- a/arch/arm/include/asm/mach/pci.h +++ b/arch/arm/include/asm/mach/pci.h @@ -22,6 +22,7 @@ struct hw_pci { struct msi_controller *msi_ctrl; struct pci_ops *ops; int nr_controllers; + unsigned int io_optional:1; void **private_data; int (*setup)(int nr, struct pci_sys_data *); struct pci_bus *(*scan)(int nr, struct pci_sys_data *); diff --git a/arch/arm/include/asm/pgalloc.h b/arch/arm/include/asm/pgalloc.h index 20febb368..b2902a5cd 100644 --- a/arch/arm/include/asm/pgalloc.h +++ b/arch/arm/include/asm/pgalloc.h @@ -57,7 +57,7 @@ static inline void pud_populate(struct mm_struct *mm, pud_t *pud, pmd_t *pmd) extern pgd_t *pgd_alloc(struct mm_struct *mm); extern void pgd_free(struct mm_struct *mm, pgd_t *pgd); -#define PGALLOC_GFP (GFP_KERNEL | __GFP_NOTRACK | __GFP_REPEAT | __GFP_ZERO) +#define PGALLOC_GFP (GFP_KERNEL | __GFP_NOTRACK | __GFP_ZERO) static inline void clean_pte_table(pte_t *pte) { diff --git a/arch/arm/include/asm/pgtable-2level-hwdef.h b/arch/arm/include/asm/pgtable-2level-hwdef.h index d0131ee6f..3f82e9da7 100644 --- a/arch/arm/include/asm/pgtable-2level-hwdef.h +++ b/arch/arm/include/asm/pgtable-2level-hwdef.h @@ -47,6 +47,7 @@ #define PMD_SECT_WB (PMD_SECT_CACHEABLE | PMD_SECT_BUFFERABLE) #define PMD_SECT_MINICACHE (PMD_SECT_TEX(1) | PMD_SECT_CACHEABLE) #define PMD_SECT_WBWA (PMD_SECT_TEX(1) | PMD_SECT_CACHEABLE | PMD_SECT_BUFFERABLE) +#define PMD_SECT_CACHE_MASK (PMD_SECT_TEX(1) | PMD_SECT_CACHEABLE | PMD_SECT_BUFFERABLE) #define PMD_SECT_NONSHARED_DEV (PMD_SECT_TEX(2)) /* diff --git a/arch/arm/include/asm/pgtable-3level-hwdef.h b/arch/arm/include/asm/pgtable-3level-hwdef.h index f8f1cff62..4cd664abf 100644 --- a/arch/arm/include/asm/pgtable-3level-hwdef.h +++ b/arch/arm/include/asm/pgtable-3level-hwdef.h @@ -62,6 +62,7 @@ #define PMD_SECT_WT (_AT(pmdval_t, 2) << 2) /* normal inner write-through */ #define PMD_SECT_WB (_AT(pmdval_t, 3) << 2) /* normal inner write-back */ #define PMD_SECT_WBWA (_AT(pmdval_t, 7) << 2) /* normal inner write-alloc */ +#define PMD_SECT_CACHE_MASK (_AT(pmdval_t, 7) << 2) /* * + Level 3 descriptor (PTE) diff --git a/arch/arm/include/asm/pgtable.h b/arch/arm/include/asm/pgtable.h index d62204060..a8d656d9a 100644 --- a/arch/arm/include/asm/pgtable.h +++ b/arch/arm/include/asm/pgtable.h @@ -97,7 +97,9 @@ extern pgprot_t pgprot_s2_device; #define PAGE_READONLY_EXEC _MOD_PROT(pgprot_user, L_PTE_USER | L_PTE_RDONLY) #define PAGE_KERNEL _MOD_PROT(pgprot_kernel, L_PTE_XN) #define PAGE_KERNEL_EXEC pgprot_kernel -#define PAGE_HYP _MOD_PROT(pgprot_kernel, L_PTE_HYP) +#define PAGE_HYP _MOD_PROT(pgprot_kernel, L_PTE_HYP | L_PTE_XN) +#define PAGE_HYP_EXEC _MOD_PROT(pgprot_kernel, L_PTE_HYP | L_PTE_RDONLY) +#define PAGE_HYP_RO _MOD_PROT(pgprot_kernel, L_PTE_HYP | L_PTE_RDONLY | L_PTE_XN) #define PAGE_HYP_DEVICE _MOD_PROT(pgprot_hyp_device, L_PTE_HYP) #define PAGE_S2 _MOD_PROT(pgprot_s2, L_PTE_S2_RDONLY) #define PAGE_S2_DEVICE _MOD_PROT(pgprot_s2_device, L_PTE_S2_RDONLY) diff --git a/arch/arm/include/asm/ptrace.h b/arch/arm/include/asm/ptrace.h index 51622ba7c..e9c9a117b 100644 --- a/arch/arm/include/asm/ptrace.h +++ b/arch/arm/include/asm/ptrace.h @@ -13,10 +13,20 @@ #include <uapi/asm/ptrace.h> #ifndef __ASSEMBLY__ +#include <linux/types.h> + struct pt_regs { unsigned long uregs[18]; }; +struct svc_pt_regs { + struct pt_regs regs; + u32 dacr; + u32 addr_limit; +}; + +#define to_svc_pt_regs(r) container_of(r, struct svc_pt_regs, regs) + #define user_mode(regs) \ (((regs)->ARM_cpsr & 0xf) == 0) diff --git a/arch/arm/include/asm/spinlock.h b/arch/arm/include/asm/spinlock.h index 0fa418463..4bec45442 100644 --- a/arch/arm/include/asm/spinlock.h +++ b/arch/arm/include/asm/spinlock.h @@ -6,6 +6,8 @@ #endif #include <linux/prefetch.h> +#include <asm/barrier.h> +#include <asm/processor.h> /* * sev and wfe are ARMv6K extensions. Uniprocessor ARMv6 may not have the K @@ -50,8 +52,21 @@ static inline void dsb_sev(void) * memory. */ -#define arch_spin_unlock_wait(lock) \ - do { while (arch_spin_is_locked(lock)) cpu_relax(); } while (0) +static inline void arch_spin_unlock_wait(arch_spinlock_t *lock) +{ + u16 owner = READ_ONCE(lock->tickets.owner); + + for (;;) { + arch_spinlock_t tmp = READ_ONCE(*lock); + + if (tmp.tickets.owner == tmp.tickets.next || + tmp.tickets.owner != owner) + break; + + wfe(); + } + smp_acquire__after_ctrl_dep(); +} #define arch_spin_lock_flags(lock, flags) arch_spin_lock(lock) diff --git a/arch/arm/include/asm/tlb.h b/arch/arm/include/asm/tlb.h index 3cadb726e..1e25cd805 100644 --- a/arch/arm/include/asm/tlb.h +++ b/arch/arm/include/asm/tlb.h @@ -209,17 +209,38 @@ tlb_end_vma(struct mmu_gather *tlb, struct vm_area_struct *vma) tlb_flush(tlb); } -static inline int __tlb_remove_page(struct mmu_gather *tlb, struct page *page) +static inline bool __tlb_remove_page(struct mmu_gather *tlb, struct page *page) { + if (tlb->nr == tlb->max) + return true; tlb->pages[tlb->nr++] = page; - VM_BUG_ON(tlb->nr > tlb->max); - return tlb->max - tlb->nr; + return false; } static inline void tlb_remove_page(struct mmu_gather *tlb, struct page *page) { - if (!__tlb_remove_page(tlb, page)) + if (__tlb_remove_page(tlb, page)) { tlb_flush_mmu(tlb); + __tlb_remove_page(tlb, page); + } +} + +static inline bool __tlb_remove_page_size(struct mmu_gather *tlb, + struct page *page, int page_size) +{ + return __tlb_remove_page(tlb, page); +} + +static inline bool __tlb_remove_pte_page(struct mmu_gather *tlb, + struct page *page) +{ + return __tlb_remove_page(tlb, page); +} + +static inline void tlb_remove_page_size(struct mmu_gather *tlb, + struct page *page, int page_size) +{ + return tlb_remove_page(tlb, page); } static inline void __pte_free_tlb(struct mmu_gather *tlb, pgtable_t pte, diff --git a/arch/arm/include/asm/uaccess.h b/arch/arm/include/asm/uaccess.h index 35c9db857..a93c0f99a 100644 --- a/arch/arm/include/asm/uaccess.h +++ b/arch/arm/include/asm/uaccess.h @@ -104,14 +104,6 @@ static inline void set_fs(mm_segment_t fs) #define segment_eq(a, b) ((a) == (b)) -#define __addr_ok(addr) ({ \ - unsigned long flag; \ - __asm__("cmp %2, %0; movlo %0, #0" \ - : "=&r" (flag) \ - : "0" (current_thread_info()->addr_limit), "r" (addr) \ - : "cc"); \ - (flag == 0); }) - /* We use 33-bit arithmetic here... */ #define __range_ok(addr, size) ({ \ unsigned long flag, roksum; \ @@ -238,49 +230,23 @@ extern int __put_user_2(void *, unsigned int); extern int __put_user_4(void *, unsigned int); extern int __put_user_8(void *, unsigned long long); -#define __put_user_x(__r2, __p, __e, __l, __s) \ - __asm__ __volatile__ ( \ - __asmeq("%0", "r0") __asmeq("%2", "r2") \ - __asmeq("%3", "r1") \ - "bl __put_user_" #__s \ - : "=&r" (__e) \ - : "0" (__p), "r" (__r2), "r" (__l) \ - : "ip", "lr", "cc") - -#define __put_user_check(x, p) \ +#define __put_user_check(__pu_val, __ptr, __err, __s) \ ({ \ unsigned long __limit = current_thread_info()->addr_limit - 1; \ - const typeof(*(p)) __user *__tmp_p = (p); \ - register const typeof(*(p)) __r2 asm("r2") = (x); \ - register const typeof(*(p)) __user *__p asm("r0") = __tmp_p; \ + register typeof(__pu_val) __r2 asm("r2") = __pu_val; \ + register const void __user *__p asm("r0") = __ptr; \ register unsigned long __l asm("r1") = __limit; \ register int __e asm("r0"); \ - unsigned int __ua_flags = uaccess_save_and_enable(); \ - switch (sizeof(*(__p))) { \ - case 1: \ - __put_user_x(__r2, __p, __e, __l, 1); \ - break; \ - case 2: \ - __put_user_x(__r2, __p, __e, __l, 2); \ - break; \ - case 4: \ - __put_user_x(__r2, __p, __e, __l, 4); \ - break; \ - case 8: \ - __put_user_x(__r2, __p, __e, __l, 8); \ - break; \ - default: __e = __put_user_bad(); break; \ - } \ - uaccess_restore(__ua_flags); \ - __e; \ + __asm__ __volatile__ ( \ + __asmeq("%0", "r0") __asmeq("%2", "r2") \ + __asmeq("%3", "r1") \ + "bl __put_user_" #__s \ + : "=&r" (__e) \ + : "0" (__p), "r" (__r2), "r" (__l) \ + : "ip", "lr", "cc"); \ + __err = __e; \ }) -#define put_user(x, p) \ - ({ \ - might_fault(); \ - __put_user_check(x, p); \ - }) - #else /* CONFIG_MMU */ /* @@ -298,7 +264,7 @@ static inline void set_fs(mm_segment_t fs) } #define get_user(x, p) __get_user(x, p) -#define put_user(x, p) __put_user(x, p) +#define __put_user_check __put_user_nocheck #endif /* CONFIG_MMU */ @@ -389,36 +355,54 @@ do { \ #define __get_user_asm_word(x, addr, err) \ __get_user_asm(x, addr, err, ldr) + +#define __put_user_switch(x, ptr, __err, __fn) \ + do { \ + const __typeof__(*(ptr)) __user *__pu_ptr = (ptr); \ + __typeof__(*(ptr)) __pu_val = (x); \ + unsigned int __ua_flags; \ + might_fault(); \ + __ua_flags = uaccess_save_and_enable(); \ + switch (sizeof(*(ptr))) { \ + case 1: __fn(__pu_val, __pu_ptr, __err, 1); break; \ + case 2: __fn(__pu_val, __pu_ptr, __err, 2); break; \ + case 4: __fn(__pu_val, __pu_ptr, __err, 4); break; \ + case 8: __fn(__pu_val, __pu_ptr, __err, 8); break; \ + default: __err = __put_user_bad(); break; \ + } \ + uaccess_restore(__ua_flags); \ + } while (0) + +#define put_user(x, ptr) \ +({ \ + int __pu_err = 0; \ + __put_user_switch((x), (ptr), __pu_err, __put_user_check); \ + __pu_err; \ +}) + #define __put_user(x, ptr) \ ({ \ long __pu_err = 0; \ - __put_user_err((x), (ptr), __pu_err); \ + __put_user_switch((x), (ptr), __pu_err, __put_user_nocheck); \ __pu_err; \ }) #define __put_user_error(x, ptr, err) \ ({ \ - __put_user_err((x), (ptr), err); \ + __put_user_switch((x), (ptr), (err), __put_user_nocheck); \ (void) 0; \ }) -#define __put_user_err(x, ptr, err) \ -do { \ - unsigned long __pu_addr = (unsigned long)(ptr); \ - unsigned int __ua_flags; \ - __typeof__(*(ptr)) __pu_val = (x); \ - __chk_user_ptr(ptr); \ - might_fault(); \ - __ua_flags = uaccess_save_and_enable(); \ - switch (sizeof(*(ptr))) { \ - case 1: __put_user_asm_byte(__pu_val, __pu_addr, err); break; \ - case 2: __put_user_asm_half(__pu_val, __pu_addr, err); break; \ - case 4: __put_user_asm_word(__pu_val, __pu_addr, err); break; \ - case 8: __put_user_asm_dword(__pu_val, __pu_addr, err); break; \ - default: __put_user_bad(); \ - } \ - uaccess_restore(__ua_flags); \ -} while (0) +#define __put_user_nocheck(x, __pu_ptr, __err, __size) \ + do { \ + unsigned long __pu_addr = (unsigned long)__pu_ptr; \ + __put_user_nocheck_##__size(x, __pu_addr, __err); \ + } while (0) + +#define __put_user_nocheck_1 __put_user_asm_byte +#define __put_user_nocheck_2 __put_user_asm_half +#define __put_user_nocheck_4 __put_user_asm_word +#define __put_user_nocheck_8 __put_user_asm_dword #define __put_user_asm(x, __pu_addr, err, instr) \ __asm__ __volatile__( \ @@ -496,7 +480,10 @@ arm_copy_from_user(void *to, const void __user *from, unsigned long n); static inline unsigned long __must_check __copy_from_user(void *to, const void __user *from, unsigned long n) { - unsigned int __ua_flags = uaccess_save_and_enable(); + unsigned int __ua_flags; + + check_object_size(to, n, false); + __ua_flags = uaccess_save_and_enable(); n = arm_copy_from_user(to, from, n); uaccess_restore(__ua_flags); return n; @@ -511,11 +498,15 @@ static inline unsigned long __must_check __copy_to_user(void __user *to, const void *from, unsigned long n) { #ifndef CONFIG_UACCESS_WITH_MEMCPY - unsigned int __ua_flags = uaccess_save_and_enable(); + unsigned int __ua_flags; + + check_object_size(from, n, true); + __ua_flags = uaccess_save_and_enable(); n = arm_copy_to_user(to, from, n); uaccess_restore(__ua_flags); return n; #else + check_object_size(from, n, true); return arm_copy_to_user(to, from, n); #endif } diff --git a/arch/arm/include/asm/virt.h b/arch/arm/include/asm/virt.h index d4ceaf5f2..a2e75b84e 100644 --- a/arch/arm/include/asm/virt.h +++ b/arch/arm/include/asm/virt.h @@ -80,6 +80,10 @@ static inline bool is_kernel_in_hyp_mode(void) return false; } +/* The section containing the hypervisor idmap text */ +extern char __hyp_idmap_text_start[]; +extern char __hyp_idmap_text_end[]; + /* The section containing the hypervisor text */ extern char __hyp_text_start[]; extern char __hyp_text_end[]; diff --git a/arch/arm/include/asm/xen/hypercall.h b/arch/arm/include/asm/xen/hypercall.h index b6b962d70..9d874db13 100644 --- a/arch/arm/include/asm/xen/hypercall.h +++ b/arch/arm/include/asm/xen/hypercall.h @@ -52,6 +52,7 @@ int HYPERVISOR_memory_op(unsigned int cmd, void *arg); int HYPERVISOR_physdev_op(int cmd, void *arg); int HYPERVISOR_vcpu_op(int cmd, int vcpuid, void *extra_args); int HYPERVISOR_tmem_op(void *arg); +int HYPERVISOR_vm_assist(unsigned int cmd, unsigned int type); int HYPERVISOR_platform_op_raw(void *arg); static inline int HYPERVISOR_platform_op(struct xen_platform_op *op) { diff --git a/arch/arm/include/asm/xen/page-coherent.h b/arch/arm/include/asm/xen/page-coherent.h index 9408a994c..95ce6ac3a 100644 --- a/arch/arm/include/asm/xen/page-coherent.h +++ b/arch/arm/include/asm/xen/page-coherent.h @@ -2,15 +2,14 @@ #define _ASM_ARM_XEN_PAGE_COHERENT_H #include <asm/page.h> -#include <linux/dma-attrs.h> #include <linux/dma-mapping.h> void __xen_dma_map_page(struct device *hwdev, struct page *page, dma_addr_t dev_addr, unsigned long offset, size_t size, - enum dma_data_direction dir, struct dma_attrs *attrs); + enum dma_data_direction dir, unsigned long attrs); void __xen_dma_unmap_page(struct device *hwdev, dma_addr_t handle, size_t size, enum dma_data_direction dir, - struct dma_attrs *attrs); + unsigned long attrs); void __xen_dma_sync_single_for_cpu(struct device *hwdev, dma_addr_t handle, size_t size, enum dma_data_direction dir); @@ -18,22 +17,20 @@ void __xen_dma_sync_single_for_device(struct device *hwdev, dma_addr_t handle, size_t size, enum dma_data_direction dir); static inline void *xen_alloc_coherent_pages(struct device *hwdev, size_t size, - dma_addr_t *dma_handle, gfp_t flags, - struct dma_attrs *attrs) + dma_addr_t *dma_handle, gfp_t flags, unsigned long attrs) { return __generic_dma_ops(hwdev)->alloc(hwdev, size, dma_handle, flags, attrs); } static inline void xen_free_coherent_pages(struct device *hwdev, size_t size, - void *cpu_addr, dma_addr_t dma_handle, - struct dma_attrs *attrs) + void *cpu_addr, dma_addr_t dma_handle, unsigned long attrs) { __generic_dma_ops(hwdev)->free(hwdev, size, cpu_addr, dma_handle, attrs); } static inline void xen_dma_map_page(struct device *hwdev, struct page *page, dma_addr_t dev_addr, unsigned long offset, size_t size, - enum dma_data_direction dir, struct dma_attrs *attrs) + enum dma_data_direction dir, unsigned long attrs) { unsigned long page_pfn = page_to_xen_pfn(page); unsigned long dev_pfn = XEN_PFN_DOWN(dev_addr); @@ -58,8 +55,7 @@ static inline void xen_dma_map_page(struct device *hwdev, struct page *page, } static inline void xen_dma_unmap_page(struct device *hwdev, dma_addr_t handle, - size_t size, enum dma_data_direction dir, - struct dma_attrs *attrs) + size_t size, enum dma_data_direction dir, unsigned long attrs) { unsigned long pfn = PFN_DOWN(handle); /* diff --git a/arch/arm/include/asm/xen/xen-ops.h b/arch/arm/include/asm/xen/xen-ops.h new file mode 100644 index 000000000..ec154e719 --- /dev/null +++ b/arch/arm/include/asm/xen/xen-ops.h @@ -0,0 +1,6 @@ +#ifndef _ASM_XEN_OPS_H +#define _ASM_XEN_OPS_H + +void xen_efi_runtime_setup(void); + +#endif /* _ASM_XEN_OPS_H */ diff --git a/arch/arm/include/debug/at91.S b/arch/arm/include/debug/at91.S index d4ae3b8e2..0098401e5 100644 --- a/arch/arm/include/debug/at91.S +++ b/arch/arm/include/debug/at91.S @@ -9,14 +9,6 @@ * */ -#ifdef CONFIG_MMU -#define AT91_IO_P2V(x) ((x) - 0x01000000) -#else -#define AT91_IO_P2V(x) (x) -#endif - -#define AT91_DEBUG_UART_VIRT AT91_IO_P2V(CONFIG_DEBUG_UART_PHYS) - #define AT91_DBGU_SR (0x14) /* Status Register */ #define AT91_DBGU_THR (0x1c) /* Transmitter Holding Register */ #define AT91_DBGU_TXRDY (1 << 1) /* Transmitter Ready */ @@ -24,7 +16,7 @@ .macro addruart, rp, rv, tmp ldr \rp, =CONFIG_DEBUG_UART_PHYS @ System peripherals (phys address) - ldr \rv, =AT91_DEBUG_UART_VIRT @ System peripherals (virt address) + ldr \rv, =CONFIG_DEBUG_UART_VIRT @ System peripherals (virt address) .endm .macro senduart,rd,rx diff --git a/arch/arm/include/debug/clps711x.S b/arch/arm/include/debug/clps711x.S index abe225436..c17ac5c9e 100644 --- a/arch/arm/include/debug/clps711x.S +++ b/arch/arm/include/debug/clps711x.S @@ -9,10 +9,10 @@ #ifndef CONFIG_DEBUG_CLPS711X_UART2 #define CLPS711X_UART_PADDR (0x80000000 + 0x0000) -#define CLPS711X_UART_VADDR (0xfeff0000 + 0x0000) +#define CLPS711X_UART_VADDR (0xfeff4000 + 0x0000) #else #define CLPS711X_UART_PADDR (0x80000000 + 0x1000) -#define CLPS711X_UART_VADDR (0xfeff0000 + 0x1000) +#define CLPS711X_UART_VADDR (0xfeff4000 + 0x1000) #endif #define SYSFLG (0x0140) diff --git a/arch/arm/include/debug/exynos.S b/arch/arm/include/debug/exynos.S index b17fdb7fb..60bf3c232 100644 --- a/arch/arm/include/debug/exynos.S +++ b/arch/arm/include/debug/exynos.S @@ -24,7 +24,11 @@ mrc p15, 0, \tmp, c0, c0, 0 and \tmp, \tmp, #0xf0 teq \tmp, #0xf0 @@ A15 - ldreq \rp, =EXYNOS5_PA_UART + beq 100f + mrc p15, 0, \tmp, c0, c0, 5 + and \tmp, \tmp, #0xf00 + teq \tmp, #0x100 @@ A15 + A7 but boot to A7 +100: ldreq \rp, =EXYNOS5_PA_UART movne \rp, #EXYNOS4_PA_UART @@ EXYNOS4 ldr \rv, =S3C_VA_UART #if CONFIG_DEBUG_S3C_UART != 0 diff --git a/arch/arm/include/debug/samsung.S b/arch/arm/include/debug/samsung.S index 8d8d922e5..f4eeed2a1 100644 --- a/arch/arm/include/debug/samsung.S +++ b/arch/arm/include/debug/samsung.S @@ -15,11 +15,13 @@ .macro fifo_level_s5pv210 rd, rx ldr \rd, [\rx, # S3C2410_UFSTAT] +ARM_BE8(rev \rd, \rd) and \rd, \rd, #S5PV210_UFSTAT_TXMASK .endm .macro fifo_full_s5pv210 rd, rx ldr \rd, [\rx, # S3C2410_UFSTAT] +ARM_BE8(rev \rd, \rd) tst \rd, #S5PV210_UFSTAT_TXFULL .endm @@ -28,6 +30,7 @@ .macro fifo_level_s3c2440 rd, rx ldr \rd, [\rx, # S3C2410_UFSTAT] +ARM_BE8(rev \rd, \rd) and \rd, \rd, #S3C2440_UFSTAT_TXMASK .endm @@ -37,6 +40,7 @@ .macro fifo_full_s3c2440 rd, rx ldr \rd, [\rx, # S3C2410_UFSTAT] +ARM_BE8(rev \rd, \rd) tst \rd, #S3C2440_UFSTAT_TXFULL .endm @@ -50,6 +54,7 @@ .macro busyuart, rd, rx ldr \rd, [\rx, # S3C2410_UFCON] +ARM_BE8(rev \rd, \rd) tst \rd, #S3C2410_UFCON_FIFOMODE @ fifo enabled? beq 1001f @ @ FIFO enabled... @@ -61,6 +66,7 @@ 1001: @ busy waiting for non fifo ldr \rd, [\rx, # S3C2410_UTRSTAT] +ARM_BE8(rev \rd, \rd) tst \rd, #S3C2410_UTRSTAT_TXFE beq 1001b @@ -69,6 +75,7 @@ .macro waituart,rd,rx ldr \rd, [\rx, # S3C2410_UFCON] +ARM_BE8(rev \rd, \rd) tst \rd, #S3C2410_UFCON_FIFOMODE @ fifo enabled? beq 1001f @ @ FIFO enabled... @@ -80,6 +87,7 @@ 1001: @ idle waiting for non fifo ldr \rd, [\rx, # S3C2410_UTRSTAT] +ARM_BE8(rev \rd, \rd) tst \rd, #S3C2410_UTRSTAT_TXFE beq 1001b diff --git a/arch/arm/include/uapi/asm/kvm.h b/arch/arm/include/uapi/asm/kvm.h index df3f60cb1..a2b3eb313 100644 --- a/arch/arm/include/uapi/asm/kvm.h +++ b/arch/arm/include/uapi/asm/kvm.h @@ -139,8 +139,8 @@ struct kvm_arch_memory_slot { #define ARM_CP15_REG64(...) __ARM_CP15_REG64(__VA_ARGS__) #define KVM_REG_ARM_TIMER_CTL ARM_CP15_REG32(0, 14, 3, 1) -#define KVM_REG_ARM_TIMER_CNT ARM_CP15_REG64(1, 14) -#define KVM_REG_ARM_TIMER_CVAL ARM_CP15_REG64(3, 14) +#define KVM_REG_ARM_TIMER_CNT ARM_CP15_REG64(1, 14) +#define KVM_REG_ARM_TIMER_CVAL ARM_CP15_REG64(3, 14) /* Normal registers are mapped as coprocessor 16. */ #define KVM_REG_ARM_CORE (0x0010 << KVM_REG_ARM_COPROC_SHIFT) diff --git a/arch/arm/kernel/asm-offsets.c b/arch/arm/kernel/asm-offsets.c index 27d05813f..608008229 100644 --- a/arch/arm/kernel/asm-offsets.c +++ b/arch/arm/kernel/asm-offsets.c @@ -107,7 +107,10 @@ int main(void) DEFINE(S_PC, offsetof(struct pt_regs, ARM_pc)); DEFINE(S_PSR, offsetof(struct pt_regs, ARM_cpsr)); DEFINE(S_OLD_R0, offsetof(struct pt_regs, ARM_ORIG_r0)); - DEFINE(S_FRAME_SIZE, sizeof(struct pt_regs)); + DEFINE(PT_REGS_SIZE, sizeof(struct pt_regs)); + DEFINE(SVC_DACR, offsetof(struct svc_pt_regs, dacr)); + DEFINE(SVC_ADDR_LIMIT, offsetof(struct svc_pt_regs, addr_limit)); + DEFINE(SVC_REGS_SIZE, sizeof(struct svc_pt_regs)); BLANK(); #ifdef CONFIG_CACHE_L2X0 DEFINE(L2X0_R_PHY_BASE, offsetof(struct l2x0_regs, phy_base)); diff --git a/arch/arm/kernel/bios32.c b/arch/arm/kernel/bios32.c index 05e61a2ee..2f0e07735 100644 --- a/arch/arm/kernel/bios32.c +++ b/arch/arm/kernel/bios32.c @@ -410,7 +410,8 @@ static int pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) return irq; } -static int pcibios_init_resources(int busnr, struct pci_sys_data *sys) +static int pcibios_init_resource(int busnr, struct pci_sys_data *sys, + int io_optional) { int ret; struct resource_entry *window; @@ -420,6 +421,14 @@ static int pcibios_init_resources(int busnr, struct pci_sys_data *sys) &iomem_resource, sys->mem_offset); } + /* + * If a platform says I/O port support is optional, we don't add + * the default I/O space. The platform is responsible for adding + * any I/O space it needs. + */ + if (io_optional) + return 0; + resource_list_for_each_entry(window, &sys->resources) if (resource_type(window->res) == IORESOURCE_IO) return 0; @@ -466,7 +475,7 @@ static void pcibios_init_hw(struct device *parent, struct hw_pci *hw, if (ret > 0) { struct pci_host_bridge *host_bridge; - ret = pcibios_init_resources(nr, sys); + ret = pcibios_init_resource(nr, sys, hw->io_optional); if (ret) { kfree(sys); break; @@ -515,25 +524,23 @@ void pci_common_init_dev(struct device *parent, struct hw_pci *hw) list_for_each_entry(sys, &head, node) { struct pci_bus *bus = sys->bus; - if (!pci_has_flag(PCI_PROBE_ONLY)) { + /* + * We insert PCI resources into the iomem_resource and + * ioport_resource trees in either pci_bus_claim_resources() + * or pci_bus_assign_resources(). + */ + if (pci_has_flag(PCI_PROBE_ONLY)) { + pci_bus_claim_resources(bus); + } else { struct pci_bus *child; - /* - * Size the bridge windows. - */ pci_bus_size_bridges(bus); - - /* - * Assign resources. - */ pci_bus_assign_resources(bus); list_for_each_entry(child, &bus->children, node) pcie_bus_configure_settings(child); } - /* - * Tell drivers about devices found. - */ + pci_bus_add_devices(bus); } } @@ -590,18 +597,6 @@ resource_size_t pcibios_align_resource(void *data, const struct resource *res, return start; } -/** - * pcibios_enable_device - Enable I/O and memory. - * @dev: PCI device to be enabled - */ -int pcibios_enable_device(struct pci_dev *dev, int mask) -{ - if (pci_has_flag(PCI_PROBE_ONLY)) - return 0; - - return pci_enable_resources(dev, mask); -} - int pci_mmap_page_range(struct pci_dev *dev, struct vm_area_struct *vma, enum pci_mmap_state mmap_state, int write_combine) { diff --git a/arch/arm/kernel/cpuidle.c b/arch/arm/kernel/cpuidle.c index a44b268e1..7dccc964d 100644 --- a/arch/arm/kernel/cpuidle.c +++ b/arch/arm/kernel/cpuidle.c @@ -47,18 +47,13 @@ int arm_cpuidle_simple_enter(struct cpuidle_device *dev, * This function calls the underlying arch specific low level PM code as * registered at the init time. * - * Returns -EOPNOTSUPP if no suspend callback is defined, the result of the - * callback otherwise. + * Returns the result of the suspend callback. */ int arm_cpuidle_suspend(int index) { - int ret = -EOPNOTSUPP; int cpu = smp_processor_id(); - if (cpuidle_ops[cpu].suspend) - ret = cpuidle_ops[cpu].suspend(index); - - return ret; + return cpuidle_ops[cpu].suspend(index); } /** @@ -92,7 +87,8 @@ static const struct cpuidle_ops *__init arm_cpuidle_get_ops(const char *method) * process. * * Return 0 on sucess, -ENOENT if no 'enable-method' is defined, -EOPNOTSUPP if - * no cpuidle_ops is registered for the 'enable-method'. + * no cpuidle_ops is registered for the 'enable-method', or if either init or + * suspend callback isn't defined. */ static int __init arm_cpuidle_read_ops(struct device_node *dn, int cpu) { @@ -110,6 +106,12 @@ static int __init arm_cpuidle_read_ops(struct device_node *dn, int cpu) return -EOPNOTSUPP; } + if (!ops->init || !ops->suspend) { + pr_warn("cpuidle_ops '%s': no init or suspend callback\n", + enable_method); + return -EOPNOTSUPP; + } + cpuidle_ops[cpu] = *ops; /* structure copy */ pr_notice("cpuidle: enable-method property '%s'" @@ -129,7 +131,8 @@ static int __init arm_cpuidle_read_ops(struct device_node *dn, int cpu) * Returns: * 0 on success, * -ENODEV if it fails to find the cpu node in the device tree, - * -EOPNOTSUPP if it does not find a registered cpuidle_ops for this cpu, + * -EOPNOTSUPP if it does not find a registered and valid cpuidle_ops for + * this cpu, * -ENOENT if it fails to find an 'enable-method' property, * -ENXIO if the HW reports a failure or a misconfiguration, * -ENOMEM if the HW report an memory allocation failure @@ -143,7 +146,7 @@ int __init arm_cpuidle_init(int cpu) return -ENODEV; ret = arm_cpuidle_read_ops(cpu_node, cpu); - if (!ret && cpuidle_ops[cpu].init) + if (!ret) ret = cpuidle_ops[cpu].init(cpu_node, cpu); of_node_put(cpu_node); diff --git a/arch/arm/kernel/devtree.c b/arch/arm/kernel/devtree.c index 2e26016a9..f676febbb 100644 --- a/arch/arm/kernel/devtree.c +++ b/arch/arm/kernel/devtree.c @@ -23,6 +23,7 @@ #include <asm/cputype.h> #include <asm/setup.h> #include <asm/page.h> +#include <asm/prom.h> #include <asm/smp_plat.h> #include <asm/mach/arch.h> #include <asm/mach-types.h> @@ -87,6 +88,8 @@ void __init arm_dt_init_cpu_maps(void) return; for_each_child_of_node(cpus, cpu) { + const __be32 *cell; + int prop_bytes; u32 hwid; if (of_node_cmp(cpu->type, "cpu")) @@ -98,7 +101,8 @@ void __init arm_dt_init_cpu_maps(void) * properties is considered invalid to build the * cpu_logical_map. */ - if (of_property_read_u32(cpu, "reg", &hwid)) { + cell = of_get_property(cpu, "reg", &prop_bytes); + if (!cell || prop_bytes < sizeof(*cell)) { pr_debug(" * %s missing reg property\n", cpu->full_name); of_node_put(cpu); @@ -106,10 +110,15 @@ void __init arm_dt_init_cpu_maps(void) } /* - * 8 MSBs must be set to 0 in the DT since the reg property + * Bits n:24 must be set to 0 in the DT since the reg property * defines the MPIDR[23:0]. */ - if (hwid & ~MPIDR_HWID_BITMASK) { + do { + hwid = be32_to_cpu(*cell++); + prop_bytes -= sizeof(*cell); + } while (!hwid && prop_bytes > 0); + + if (prop_bytes || (hwid & ~MPIDR_HWID_BITMASK)) { of_node_put(cpu); return; } @@ -213,6 +222,8 @@ const struct machine_desc * __init setup_machine_fdt(unsigned int dt_phys) #if defined(CONFIG_ARCH_MULTIPLATFORM) || defined(CONFIG_ARM_SINGLE_ARMV7M) DT_MACHINE_START(GENERIC_DT, "Generic DT based system") + .l2c_aux_val = 0x0, + .l2c_aux_mask = ~0x0, MACHINE_END mdesc_best = &__mach_desc_GENERIC_DT; diff --git a/arch/arm/kernel/entry-armv.S b/arch/arm/kernel/entry-armv.S index e25505004..9f157e7c5 100644 --- a/arch/arm/kernel/entry-armv.S +++ b/arch/arm/kernel/entry-armv.S @@ -92,7 +92,7 @@ * Invalid mode handlers */ .macro inv_entry, reason - sub sp, sp, #S_FRAME_SIZE + sub sp, sp, #PT_REGS_SIZE ARM( stmib sp, {r1 - lr} ) THUMB( stmia sp, {r0 - r12} ) THUMB( str sp, [sp, #S_SP] ) @@ -152,7 +152,7 @@ ENDPROC(__und_invalid) .macro svc_entry, stack_hole=0, trace=1, uaccess=1 UNWIND(.fnstart ) UNWIND(.save {r0 - pc} ) - sub sp, sp, #(S_FRAME_SIZE + 8 + \stack_hole - 4) + sub sp, sp, #(SVC_REGS_SIZE + \stack_hole - 4) #ifdef CONFIG_THUMB2_KERNEL SPFIX( str r0, [sp] ) @ temporarily saved SPFIX( mov r0, sp ) @@ -167,7 +167,7 @@ ENDPROC(__und_invalid) ldmia r0, {r3 - r5} add r7, sp, #S_SP - 4 @ here for interlock avoidance mov r6, #-1 @ "" "" "" "" - add r2, sp, #(S_FRAME_SIZE + 8 + \stack_hole - 4) + add r2, sp, #(SVC_REGS_SIZE + \stack_hole - 4) SPFIX( addeq r2, r2, #4 ) str r3, [sp, #-4]! @ save the "real" r0 copied @ from the exception stack @@ -185,6 +185,12 @@ ENDPROC(__und_invalid) @ stmia r7, {r2 - r6} + get_thread_info tsk + ldr r0, [tsk, #TI_ADDR_LIMIT] + mov r1, #TASK_SIZE + str r1, [tsk, #TI_ADDR_LIMIT] + str r0, [sp, #SVC_ADDR_LIMIT] + uaccess_save r0 .if \uaccess uaccess_disable r0 @@ -213,7 +219,6 @@ __irq_svc: irq_handler #ifdef CONFIG_PREEMPT - get_thread_info tsk ldr r8, [tsk, #TI_PREEMPT] @ get preempt count ldr r0, [tsk, #TI_FLAGS] @ get flags teq r8, #0 @ if preempt count != 0 @@ -290,6 +295,7 @@ __und_svc_fault: bl __und_fault __und_svc_finish: + get_thread_info tsk ldr r5, [sp, #S_PSR] @ Get SVC cpsr svc_exit r5 @ return from exception UNWIND(.fnend ) @@ -366,17 +372,17 @@ ENDPROC(__fiq_abt) /* * User mode handlers * - * EABI note: sp_svc is always 64-bit aligned here, so should S_FRAME_SIZE + * EABI note: sp_svc is always 64-bit aligned here, so should PT_REGS_SIZE */ -#if defined(CONFIG_AEABI) && (__LINUX_ARM_ARCH__ >= 5) && (S_FRAME_SIZE & 7) +#if defined(CONFIG_AEABI) && (__LINUX_ARM_ARCH__ >= 5) && (PT_REGS_SIZE & 7) #error "sizeof(struct pt_regs) must be a multiple of 8" #endif .macro usr_entry, trace=1, uaccess=1 UNWIND(.fnstart ) UNWIND(.cantunwind ) @ don't unwind the user space - sub sp, sp, #S_FRAME_SIZE + sub sp, sp, #PT_REGS_SIZE ARM( stmib sp, {r1 - r12} ) THUMB( stmia sp, {r0 - r12} ) diff --git a/arch/arm/kernel/entry-common.S b/arch/arm/kernel/entry-common.S index 30a7228ea..10c3283d6 100644 --- a/arch/arm/kernel/entry-common.S +++ b/arch/arm/kernel/entry-common.S @@ -145,7 +145,7 @@ ENTRY(vector_swi) #ifdef CONFIG_CPU_V7M v7m_exception_entry #else - sub sp, sp, #S_FRAME_SIZE + sub sp, sp, #PT_REGS_SIZE stmia sp, {r0 - r12} @ Calling r0 - r12 ARM( add r8, sp, #S_PC ) ARM( stmdb r8, {sp, lr}^ ) @ Calling sp, lr diff --git a/arch/arm/kernel/entry-header.S b/arch/arm/kernel/entry-header.S index 0d22ad206..6391728c8 100644 --- a/arch/arm/kernel/entry-header.S +++ b/arch/arm/kernel/entry-header.S @@ -90,7 +90,7 @@ @ Linux expects to have irqs off. Do it here before taking stack space cpsid i - sub sp, #S_FRAME_SIZE-S_IP + sub sp, #PT_REGS_SIZE-S_IP stmdb sp!, {r0-r11} @ load saved r12, lr, return address and xPSR. @@ -160,7 +160,7 @@ ldmia sp!, {r0-r11} @ restore main sp - add sp, sp, #S_FRAME_SIZE-S_IP + add sp, sp, #PT_REGS_SIZE-S_IP cpsie i bx lr @@ -215,7 +215,9 @@ blne trace_hardirqs_off #endif .endif + ldr r1, [sp, #SVC_ADDR_LIMIT] uaccess_restore + str r1, [tsk, #TI_ADDR_LIMIT] #ifndef CONFIG_THUMB2_KERNEL @ ARM mode SVC restore @@ -259,7 +261,9 @@ @ on the stack remains correct). @ .macro svc_exit_via_fiq + ldr r1, [sp, #SVC_ADDR_LIMIT] uaccess_restore + str r1, [tsk, #TI_ADDR_LIMIT] #ifndef CONFIG_THUMB2_KERNEL @ ARM mode restore mov r0, sp @@ -307,7 +311,7 @@ .endif mov r0, r0 @ ARMv5T and earlier require a nop @ after ldm {}^ - add sp, sp, #\offset + S_FRAME_SIZE + add sp, sp, #\offset + PT_REGS_SIZE movs pc, lr @ return & move spsr_svc into cpsr #elif defined(CONFIG_CPU_V7M) @ V7M restore. @@ -334,7 +338,7 @@ .else ldmdb sp, {r0 - r12} @ get calling r0 - r12 .endif - add sp, sp, #S_FRAME_SIZE - S_SP + add sp, sp, #PT_REGS_SIZE - S_SP movs pc, lr @ return & move spsr_svc into cpsr #endif /* !CONFIG_THUMB2_KERNEL */ .endm diff --git a/arch/arm/kernel/entry-v7m.S b/arch/arm/kernel/entry-v7m.S index 907534f97..abcf47848 100644 --- a/arch/arm/kernel/entry-v7m.S +++ b/arch/arm/kernel/entry-v7m.S @@ -73,7 +73,7 @@ __irq_entry: @ correctness they don't need to be restored. So only r8-r11 must be @ restored here. The easiest way to do so is to restore r0-r7, too. ldmia sp!, {r0-r11} - add sp, #S_FRAME_SIZE-S_IP + add sp, #PT_REGS_SIZE-S_IP cpsie i bx lr ENDPROC(__irq_entry) diff --git a/arch/arm/kernel/hyp-stub.S b/arch/arm/kernel/hyp-stub.S index 0b1e4a93d..15d073ae5 100644 --- a/arch/arm/kernel/hyp-stub.S +++ b/arch/arm/kernel/hyp-stub.S @@ -142,6 +142,19 @@ ARM_BE8(orr r7, r7, #(1 << 25)) @ HSCTLR.EE and r7, #0x1f @ Preserve HPMN mcr p15, 4, r7, c1, c1, 1 @ HDCR + @ Make sure NS-SVC is initialised appropriately + mrc p15, 0, r7, c1, c0, 0 @ SCTLR + orr r7, #(1 << 5) @ CP15 barriers enabled + bic r7, #(3 << 7) @ Clear SED/ITD for v8 (RES0 for v7) + bic r7, #(3 << 19) @ WXN and UWXN disabled + mcr p15, 0, r7, c1, c0, 0 @ SCTLR + + mrc p15, 0, r7, c0, c0, 0 @ MIDR + mcr p15, 4, r7, c0, c0, 0 @ VPIDR + + mrc p15, 0, r7, c0, c0, 5 @ MPIDR + mcr p15, 4, r7, c0, c0, 5 @ VMPIDR + #if !defined(ZIMAGE) && defined(CONFIG_ARM_ARCH_TIMER) @ make CNTP_* and CNTPCT accessible from PL1 mrc p15, 0, r7, c0, c1, 1 @ ID_PFR1 diff --git a/arch/arm/kernel/machine_kexec.c b/arch/arm/kernel/machine_kexec.c index 59fd0e24c..b18c1ea56 100644 --- a/arch/arm/kernel/machine_kexec.c +++ b/arch/arm/kernel/machine_kexec.c @@ -57,7 +57,7 @@ int machine_kexec_prepare(struct kimage *image) for (i = 0; i < image->nr_segments; i++) { current_segment = &image->segment[i]; - if (!memblock_is_region_memory(current_segment->mem, + if (!memblock_is_region_memory(idmap_to_phys(current_segment->mem), current_segment->memsz)) return -EINVAL; diff --git a/arch/arm/kernel/process.c b/arch/arm/kernel/process.c index 4a803c5a1..612eb530f 100644 --- a/arch/arm/kernel/process.c +++ b/arch/arm/kernel/process.c @@ -96,19 +96,23 @@ void __show_regs(struct pt_regs *regs) unsigned long flags; char buf[64]; #ifndef CONFIG_CPU_V7M - unsigned int domain; + unsigned int domain, fs; #ifdef CONFIG_CPU_SW_DOMAIN_PAN /* * Get the domain register for the parent context. In user * mode, we don't save the DACR, so lets use what it should * be. For other modes, we place it after the pt_regs struct. */ - if (user_mode(regs)) + if (user_mode(regs)) { domain = DACR_UACCESS_ENABLE; - else - domain = *(unsigned int *)(regs + 1); + fs = get_fs(); + } else { + domain = to_svc_pt_regs(regs)->dacr; + fs = to_svc_pt_regs(regs)->addr_limit; + } #else domain = get_domain(); + fs = get_fs(); #endif #endif @@ -144,7 +148,7 @@ void __show_regs(struct pt_regs *regs) if ((domain & domain_mask(DOMAIN_USER)) == domain_val(DOMAIN_USER, DOMAIN_NOACCESS)) segment = "none"; - else if (get_fs() == get_ds()) + else if (fs == get_ds()) segment = "kernel"; else segment = "user"; diff --git a/arch/arm/kernel/ptrace.c b/arch/arm/kernel/ptrace.c index 4d9375814..ce131ed59 100644 --- a/arch/arm/kernel/ptrace.c +++ b/arch/arm/kernel/ptrace.c @@ -932,18 +932,19 @@ asmlinkage int syscall_trace_enter(struct pt_regs *regs, int scno) { current_thread_info()->syscall = scno; - /* Do the secure computing check first; failures should be fast. */ + if (test_thread_flag(TIF_SYSCALL_TRACE)) + tracehook_report_syscall(regs, PTRACE_SYSCALL_ENTER); + + /* Do seccomp after ptrace; syscall may have changed. */ #ifdef CONFIG_HAVE_ARCH_SECCOMP_FILTER - if (secure_computing() == -1) + if (secure_computing(NULL) == -1) return -1; #else /* XXX: remove this once OABI gets fixed */ - secure_computing_strict(scno); + secure_computing_strict(current_thread_info()->syscall); #endif - if (test_thread_flag(TIF_SYSCALL_TRACE)) - tracehook_report_syscall(regs, PTRACE_SYSCALL_ENTER); - + /* Tracer or seccomp may have changed syscall. */ scno = current_thread_info()->syscall; if (test_thread_flag(TIF_SYSCALL_TRACEPOINT)) diff --git a/arch/arm/kernel/setup.c b/arch/arm/kernel/setup.c index 7b5350060..df7f2a75e 100644 --- a/arch/arm/kernel/setup.c +++ b/arch/arm/kernel/setup.c @@ -19,7 +19,6 @@ #include <linux/bootmem.h> #include <linux/seq_file.h> #include <linux/screen_info.h> -#include <linux/of_iommu.h> #include <linux/of_platform.h> #include <linux/init.h> #include <linux/kexec.h> @@ -844,15 +843,34 @@ static void __init request_standard_resources(const struct machine_desc *mdesc) struct resource *res; kernel_code.start = virt_to_phys(_text); - kernel_code.end = virt_to_phys(_etext - 1); + kernel_code.end = virt_to_phys(__init_begin - 1); kernel_data.start = virt_to_phys(_sdata); kernel_data.end = virt_to_phys(_end - 1); for_each_memblock(memory, region) { + phys_addr_t start = __pfn_to_phys(memblock_region_memory_base_pfn(region)); + phys_addr_t end = __pfn_to_phys(memblock_region_memory_end_pfn(region)) - 1; + unsigned long boot_alias_start; + + /* + * Some systems have a special memory alias which is only + * used for booting. We need to advertise this region to + * kexec-tools so they know where bootable RAM is located. + */ + boot_alias_start = phys_to_idmap(start); + if (arm_has_idmap_alias() && boot_alias_start != IDMAP_INVALID_ADDR) { + res = memblock_virt_alloc(sizeof(*res), 0); + res->name = "System RAM (boot alias)"; + res->start = boot_alias_start; + res->end = phys_to_idmap(end); + res->flags = IORESOURCE_MEM | IORESOURCE_BUSY; + request_resource(&iomem_resource, res); + } + res = memblock_virt_alloc(sizeof(*res), 0); res->name = "System RAM"; - res->start = __pfn_to_phys(memblock_region_memory_base_pfn(region)); - res->end = __pfn_to_phys(memblock_region_memory_end_pfn(region)) - 1; + res->start = start; + res->end = end; res->flags = IORESOURCE_SYSTEM_RAM | IORESOURCE_BUSY; request_resource(&iomem_resource, res); @@ -903,14 +921,9 @@ static int __init customize_machine(void) * machine from the device tree, if no callback is provided, * otherwise we would always need an init_machine callback. */ - of_iommu_init(); if (machine_desc->init_machine) machine_desc->init_machine(); -#ifdef CONFIG_OF - else - of_platform_populate(NULL, of_default_bus_match_table, - NULL, NULL); -#endif + return 0; } arch_initcall(customize_machine); @@ -1006,9 +1019,25 @@ static void __init reserve_crashkernel(void) (unsigned long)(crash_base >> 20), (unsigned long)(total_mem >> 20)); + /* The crashk resource must always be located in normal mem */ crashk_res.start = crash_base; crashk_res.end = crash_base + crash_size - 1; insert_resource(&iomem_resource, &crashk_res); + + if (arm_has_idmap_alias()) { + /* + * If we have a special RAM alias for use at boot, we + * need to advertise to kexec tools where the alias is. + */ + static struct resource crashk_boot_res = { + .name = "Crash kernel (boot alias)", + .flags = IORESOURCE_BUSY | IORESOURCE_MEM, + }; + + crashk_boot_res.start = phys_to_idmap(crash_base); + crashk_boot_res.end = crashk_boot_res.start + crash_size - 1; + insert_resource(&iomem_resource, &crashk_boot_res); + } } #else static inline void reserve_crashkernel(void) {} @@ -1064,6 +1093,7 @@ void __init setup_arch(char **cmdline_p) early_paging_init(mdesc); #endif setup_dma_zone(mdesc); + xen_early_init(); efi_init(); sanity_check_meminfo(); arm_memblock_init(mdesc); @@ -1080,7 +1110,6 @@ void __init setup_arch(char **cmdline_p) arm_dt_init_cpu_maps(); psci_dt_init(); - xen_early_init(); #ifdef CONFIG_SMP if (is_smp()) { if (!mdesc->smp_init || !mdesc->smp_init()) { diff --git a/arch/arm/kernel/smp_tlb.c b/arch/arm/kernel/smp_tlb.c index 2e72be4f6..22313cb53 100644 --- a/arch/arm/kernel/smp_tlb.c +++ b/arch/arm/kernel/smp_tlb.c @@ -93,17 +93,53 @@ void erratum_a15_798181_init(void) unsigned int revidr = read_cpuid(CPUID_REVIDR); /* Brahma-B15 r0p0..r0p2 affected - * Cortex-A15 r0p0..r3p2 w/o ECO fix affected */ - if ((midr & 0xff0ffff0) == 0x420f00f0 && midr <= 0x420f00f2) + * Cortex-A15 r0p0..r3p3 w/o ECO fix affected + * Fixes applied to A15 with respect to the revision and revidr are: + * + * r0p0-r2p1: No fixes applied + * r2p2,r2p3: + * REVIDR[4]: 798181 Moving a virtual page that is being accessed + * by an active process can lead to unexpected behavior + * REVIDR[9]: Not defined + * r2p4,r3p0,r3p1,r3p2: + * REVIDR[4]: 798181 Moving a virtual page that is being accessed + * by an active process can lead to unexpected behavior + * REVIDR[9]: 798181 Moving a virtual page that is being accessed + * by an active process can lead to unexpected behavior + * - This is an update to a previously released ECO. + * r3p3: + * REVIDR[4]: Reserved + * REVIDR[9]: 798181 Moving a virtual page that is being accessed + * by an active process can lead to unexpected behavior + * - This is an update to a previously released ECO. + * + * Handling: + * REVIDR[9] set -> No WA + * REVIDR[4] set, REVIDR[9] cleared -> Partial WA + * Both cleared -> Full WA + */ + if ((midr & 0xff0ffff0) == 0x420f00f0 && midr <= 0x420f00f2) { erratum_a15_798181_handler = erratum_a15_798181_broadcast; - else if ((midr & 0xff0ffff0) == 0x410fc0f0 && midr <= 0x413fc0f2 && - (revidr & 0x210) != 0x210) { + } else if ((midr & 0xff0ffff0) == 0x410fc0f0 && midr < 0x412fc0f2) { + erratum_a15_798181_handler = erratum_a15_798181_broadcast; + } else if ((midr & 0xff0ffff0) == 0x410fc0f0 && midr < 0x412fc0f4) { if (revidr & 0x10) erratum_a15_798181_handler = erratum_a15_798181_partial; else erratum_a15_798181_handler = erratum_a15_798181_broadcast; + } else if ((midr & 0xff0ffff0) == 0x410fc0f0 && midr < 0x413fc0f3) { + if ((revidr & 0x210) == 0) + erratum_a15_798181_handler = + erratum_a15_798181_broadcast; + else if (revidr & 0x10) + erratum_a15_798181_handler = + erratum_a15_798181_partial; + } else if ((midr & 0xff0ffff0) == 0x410fc0f0 && midr < 0x414fc0f0) { + if ((revidr & 0x200) == 0) + erratum_a15_798181_handler = + erratum_a15_798181_partial; } } #endif diff --git a/arch/arm/kernel/smp_twd.c b/arch/arm/kernel/smp_twd.c index 1bfa7a7f5..02d5e5e8d 100644 --- a/arch/arm/kernel/smp_twd.c +++ b/arch/arm/kernel/smp_twd.c @@ -310,24 +310,17 @@ static void twd_timer_setup(void) enable_percpu_irq(clk->irq, 0); } -static int twd_timer_cpu_notify(struct notifier_block *self, - unsigned long action, void *hcpu) +static int twd_timer_starting_cpu(unsigned int cpu) { - switch (action & ~CPU_TASKS_FROZEN) { - case CPU_STARTING: - twd_timer_setup(); - break; - case CPU_DYING: - twd_timer_stop(); - break; - } - - return NOTIFY_OK; + twd_timer_setup(); + return 0; } -static struct notifier_block twd_timer_cpu_nb = { - .notifier_call = twd_timer_cpu_notify, -}; +static int twd_timer_dying_cpu(unsigned int cpu) +{ + twd_timer_stop(); + return 0; +} static int __init twd_local_timer_common_register(struct device_node *np) { @@ -345,9 +338,9 @@ static int __init twd_local_timer_common_register(struct device_node *np) goto out_free; } - err = register_cpu_notifier(&twd_timer_cpu_nb); - if (err) - goto out_irq; + cpuhp_setup_state_nocalls(CPUHP_AP_ARM_TWD_STARTING, + "AP_ARM_TWD_STARTING", + twd_timer_starting_cpu, twd_timer_dying_cpu); twd_get_clock(np); if (!of_property_read_bool(np, "always-on")) @@ -365,8 +358,6 @@ static int __init twd_local_timer_common_register(struct device_node *np) return 0; -out_irq: - free_percpu_irq(twd_ppi, twd_evt); out_free: iounmap(twd_base); twd_base = NULL; @@ -390,7 +381,7 @@ int __init twd_local_timer_register(struct twd_local_timer *tlt) } #ifdef CONFIG_OF -static void __init twd_local_timer_of_register(struct device_node *np) +static int __init twd_local_timer_of_register(struct device_node *np) { int err; @@ -410,6 +401,7 @@ static void __init twd_local_timer_of_register(struct device_node *np) out: WARN(err, "twd_local_timer_of_register failed (%d)\n", err); + return err; } CLOCKSOURCE_OF_DECLARE(arm_twd_a9, "arm,cortex-a9-twd-timer", twd_local_timer_of_register); CLOCKSOURCE_OF_DECLARE(arm_twd_a5, "arm,cortex-a5-twd-timer", twd_local_timer_of_register); diff --git a/arch/arm/kernel/vmlinux.lds.S b/arch/arm/kernel/vmlinux.lds.S index e2c6da096..d24e5dd2a 100644 --- a/arch/arm/kernel/vmlinux.lds.S +++ b/arch/arm/kernel/vmlinux.lds.S @@ -44,7 +44,7 @@ #endif #if (defined(CONFIG_SMP_ON_UP) && !defined(CONFIG_DEBUG_SPINLOCK)) || \ - defined(CONFIG_GENERIC_BUG) + defined(CONFIG_GENERIC_BUG) || defined(CONFIG_JUMP_LABEL) #define ARM_EXIT_KEEP(x) x #define ARM_EXIT_DISCARD(x) #else @@ -125,6 +125,8 @@ SECTIONS #ifdef CONFIG_DEBUG_ALIGN_RODATA . = ALIGN(1<<SECTION_SHIFT); #endif + _etext = .; /* End of text section */ + RO_DATA(PAGE_SIZE) . = ALIGN(4); @@ -155,8 +157,6 @@ SECTIONS NOTES - _etext = .; /* End of text and rodata section */ - #ifdef CONFIG_DEBUG_RODATA . = ALIGN(1<<SECTION_SHIFT); #else diff --git a/arch/arm/kvm/Kconfig b/arch/arm/kvm/Kconfig index 02abfff68..3e1cd0452 100644 --- a/arch/arm/kvm/Kconfig +++ b/arch/arm/kvm/Kconfig @@ -32,6 +32,8 @@ config KVM select KVM_VFIO select HAVE_KVM_EVENTFD select HAVE_KVM_IRQFD + select HAVE_KVM_IRQCHIP + select HAVE_KVM_IRQ_ROUTING depends on ARM_VIRT_EXT && ARM_LPAE && ARM_ARCH_TIMER ---help--- Support hosting virtualized guest machines. @@ -46,13 +48,6 @@ config KVM_ARM_HOST ---help--- Provides host support for ARM processors. -config KVM_NEW_VGIC - bool "New VGIC implementation" - depends on KVM - default y - ---help--- - uses the new VGIC implementation - source drivers/vhost/Kconfig endif # VIRTUALIZATION diff --git a/arch/arm/kvm/Makefile b/arch/arm/kvm/Makefile index a596b58f6..10d77a66c 100644 --- a/arch/arm/kvm/Makefile +++ b/arch/arm/kvm/Makefile @@ -22,7 +22,6 @@ obj-y += kvm-arm.o init.o interrupts.o obj-y += arm.o handle_exit.o guest.o mmu.o emulate.o reset.o obj-y += coproc.o coproc_a15.o coproc_a7.o mmio.o psci.o perf.o -ifeq ($(CONFIG_KVM_NEW_VGIC),y) obj-y += $(KVM)/arm/vgic/vgic.o obj-y += $(KVM)/arm/vgic/vgic-init.o obj-y += $(KVM)/arm/vgic/vgic-irqfd.o @@ -30,9 +29,5 @@ obj-y += $(KVM)/arm/vgic/vgic-v2.o obj-y += $(KVM)/arm/vgic/vgic-mmio.o obj-y += $(KVM)/arm/vgic/vgic-mmio-v2.o obj-y += $(KVM)/arm/vgic/vgic-kvm-device.o -else -obj-y += $(KVM)/arm/vgic.o -obj-y += $(KVM)/arm/vgic-v2.o -obj-y += $(KVM)/arm/vgic-v2-emul.o -endif +obj-y += $(KVM)/irqchip.o obj-y += $(KVM)/arm/arch_timer.o diff --git a/arch/arm/kvm/arm.c b/arch/arm/kvm/arm.c index 4e1b22a80..c94b90d43 100644 --- a/arch/arm/kvm/arm.c +++ b/arch/arm/kvm/arm.c @@ -20,6 +20,7 @@ #include <linux/errno.h> #include <linux/err.h> #include <linux/kvm_host.h> +#include <linux/list.h> #include <linux/module.h> #include <linux/vmalloc.h> #include <linux/fs.h> @@ -122,7 +123,7 @@ int kvm_arch_init_vm(struct kvm *kvm, unsigned long type) if (ret) goto out_fail_alloc; - ret = create_hyp_mappings(kvm, kvm + 1); + ret = create_hyp_mappings(kvm, kvm + 1, PAGE_HYP); if (ret) goto out_free_stage2_pgd; @@ -199,7 +200,7 @@ int kvm_vm_ioctl_check_extension(struct kvm *kvm, long ext) r = KVM_MAX_VCPUS; break; default: - r = kvm_arch_dev_ioctl_check_extension(ext); + r = kvm_arch_dev_ioctl_check_extension(kvm, ext); break; } return r; @@ -237,7 +238,7 @@ struct kvm_vcpu *kvm_arch_vcpu_create(struct kvm *kvm, unsigned int id) if (err) goto free_vcpu; - err = create_hyp_mappings(vcpu, vcpu + 1); + err = create_hyp_mappings(vcpu, vcpu + 1, PAGE_HYP); if (err) goto vcpu_uninit; @@ -375,7 +376,7 @@ void force_vm_exit(const cpumask_t *mask) /** * need_new_vmid_gen - check that the VMID is still valid - * @kvm: The VM's VMID to checkt + * @kvm: The VM's VMID to check * * return true if there is a new generation of VMIDs being used * @@ -614,7 +615,7 @@ int kvm_arch_vcpu_ioctl_run(struct kvm_vcpu *vcpu, struct kvm_run *run) * Enter the guest */ trace_kvm_entry(*vcpu_pc(vcpu)); - __kvm_guest_enter(); + guest_enter_irqoff(); vcpu->mode = IN_GUEST_MODE; ret = kvm_call_hyp(__kvm_vcpu_run, vcpu); @@ -640,14 +641,14 @@ int kvm_arch_vcpu_ioctl_run(struct kvm_vcpu *vcpu, struct kvm_run *run) local_irq_enable(); /* - * We do local_irq_enable() before calling kvm_guest_exit() so + * We do local_irq_enable() before calling guest_exit() so * that if a timer interrupt hits while running the guest we * account that tick as being spent in the guest. We enable - * preemption after calling kvm_guest_exit() so that if we get + * preemption after calling guest_exit() so that if we get * preempted we make sure ticks after that is not counted as * guest time. */ - kvm_guest_exit(); + guest_exit(); trace_kvm_exit(ret, kvm_vcpu_trap_get_class(vcpu), *vcpu_pc(vcpu)); /* @@ -1006,9 +1007,13 @@ long kvm_arch_vm_ioctl(struct file *filp, switch (ioctl) { case KVM_CREATE_IRQCHIP: { + int ret; if (!vgic_present) return -ENXIO; - return kvm_vgic_create(kvm, KVM_DEV_TYPE_ARM_VGIC_V2); + mutex_lock(&kvm->lock); + ret = kvm_vgic_create(kvm, KVM_DEV_TYPE_ARM_VGIC_V2); + mutex_unlock(&kvm->lock); + return ret; } case KVM_ARM_SET_DEVICE_ADDR: { struct kvm_arm_device_addr dev_addr; @@ -1037,7 +1042,6 @@ long kvm_arch_vm_ioctl(struct file *filp, static void cpu_init_hyp_mode(void *dummy) { - phys_addr_t boot_pgd_ptr; phys_addr_t pgd_ptr; unsigned long hyp_stack_ptr; unsigned long stack_page; @@ -1046,13 +1050,12 @@ static void cpu_init_hyp_mode(void *dummy) /* Switch from the HYP stub to our own HYP init vector */ __hyp_set_vectors(kvm_get_idmap_vector()); - boot_pgd_ptr = kvm_mmu_get_boot_httbr(); pgd_ptr = kvm_mmu_get_httbr(); stack_page = __this_cpu_read(kvm_arm_hyp_stack_page); hyp_stack_ptr = stack_page + PAGE_SIZE; vector_ptr = (unsigned long)kvm_ksym_ref(__kvm_hyp_vector); - __cpu_init_hyp_mode(boot_pgd_ptr, pgd_ptr, hyp_stack_ptr, vector_ptr); + __cpu_init_hyp_mode(pgd_ptr, hyp_stack_ptr, vector_ptr); __cpu_init_stage2(); kvm_arm_init_debug(); @@ -1074,15 +1077,9 @@ static void cpu_hyp_reinit(void) static void cpu_hyp_reset(void) { - phys_addr_t boot_pgd_ptr; - phys_addr_t phys_idmap_start; - - if (!is_kernel_in_hyp_mode()) { - boot_pgd_ptr = kvm_mmu_get_boot_httbr(); - phys_idmap_start = kvm_get_idmap_start(); - - __cpu_reset_hyp_mode(boot_pgd_ptr, phys_idmap_start); - } + if (!is_kernel_in_hyp_mode()) + __cpu_reset_hyp_mode(hyp_default_vectors, + kvm_get_idmap_start()); } static void _kvm_arch_hardware_enable(void *discard) @@ -1292,14 +1289,14 @@ static int init_hyp_mode(void) * Map the Hyp-code called directly from the host */ err = create_hyp_mappings(kvm_ksym_ref(__hyp_text_start), - kvm_ksym_ref(__hyp_text_end)); + kvm_ksym_ref(__hyp_text_end), PAGE_HYP_EXEC); if (err) { kvm_err("Cannot map world-switch code\n"); goto out_err; } err = create_hyp_mappings(kvm_ksym_ref(__start_rodata), - kvm_ksym_ref(__end_rodata)); + kvm_ksym_ref(__end_rodata), PAGE_HYP_RO); if (err) { kvm_err("Cannot map rodata section\n"); goto out_err; @@ -1310,7 +1307,8 @@ static int init_hyp_mode(void) */ for_each_possible_cpu(cpu) { char *stack_page = (char *)per_cpu(kvm_arm_hyp_stack_page, cpu); - err = create_hyp_mappings(stack_page, stack_page + PAGE_SIZE); + err = create_hyp_mappings(stack_page, stack_page + PAGE_SIZE, + PAGE_HYP); if (err) { kvm_err("Cannot map hyp stack\n"); @@ -1322,7 +1320,7 @@ static int init_hyp_mode(void) kvm_cpu_context_t *cpu_ctxt; cpu_ctxt = per_cpu_ptr(kvm_host_cpu_state, cpu); - err = create_hyp_mappings(cpu_ctxt, cpu_ctxt + 1); + err = create_hyp_mappings(cpu_ctxt, cpu_ctxt + 1, PAGE_HYP); if (err) { kvm_err("Cannot map host CPU state: %d\n", err); @@ -1330,10 +1328,6 @@ static int init_hyp_mode(void) } } -#ifndef CONFIG_HOTPLUG_CPU - free_boot_hyp_pgd(); -#endif - /* set size of VMID supported by CPU */ kvm_vmid_bits = kvm_get_vmid_bits(); kvm_info("%d-bit VMID\n", kvm_vmid_bits); diff --git a/arch/arm/kvm/emulate.c b/arch/arm/kvm/emulate.c index a494def3f..af93e3ffc 100644 --- a/arch/arm/kvm/emulate.c +++ b/arch/arm/kvm/emulate.c @@ -210,7 +210,7 @@ bool kvm_condition_valid(struct kvm_vcpu *vcpu) * @vcpu: The VCPU pointer * * When exceptions occur while instructions are executed in Thumb IF-THEN - * blocks, the ITSTATE field of the CPSR is not advanved (updated), so we have + * blocks, the ITSTATE field of the CPSR is not advanced (updated), so we have * to do this little bit of work manually. The fields map like this: * * IT[7:0] -> CPSR[26:25],CPSR[15:10] diff --git a/arch/arm/kvm/guest.c b/arch/arm/kvm/guest.c index 9093ed0f8..9aca92074 100644 --- a/arch/arm/kvm/guest.c +++ b/arch/arm/kvm/guest.c @@ -182,7 +182,7 @@ unsigned long kvm_arm_num_regs(struct kvm_vcpu *vcpu) /** * kvm_arm_copy_reg_indices - get indices of all registers. * - * We do core registers right here, then we apppend coproc regs. + * We do core registers right here, then we append coproc regs. */ int kvm_arm_copy_reg_indices(struct kvm_vcpu *vcpu, u64 __user *uindices) { diff --git a/arch/arm/kvm/init.S b/arch/arm/kvm/init.S index 1f9ae1747..bf89c919e 100644 --- a/arch/arm/kvm/init.S +++ b/arch/arm/kvm/init.S @@ -32,23 +32,13 @@ * r2,r3 = Hypervisor pgd pointer * * The init scenario is: - * - We jump in HYP with four parameters: boot HYP pgd, runtime HYP pgd, - * runtime stack, runtime vectors - * - Enable the MMU with the boot pgd - * - Jump to a target into the trampoline page (remember, this is the same - * physical page!) - * - Now switch to the runtime pgd (same VA, and still the same physical - * page!) + * - We jump in HYP with 3 parameters: runtime HYP pgd, runtime stack, + * runtime vectors * - Invalidate TLBs * - Set stack and vectors + * - Setup the page tables + * - Enable the MMU * - Profit! (or eret, if you only care about the code). - * - * As we only have four registers available to pass parameters (and we - * need six), we split the init in two phases: - * - Phase 1: r0 = 0, r1 = 0, r2,r3 contain the boot PGD. - * Provides the basic HYP init, and enable the MMU. - * - Phase 2: r0 = ToS, r1 = vectors, r2,r3 contain the runtime PGD. - * Switches to the runtime PGD, set stack and vectors. */ .text @@ -68,8 +58,11 @@ __kvm_hyp_init: W(b) . __do_hyp_init: - cmp r0, #0 @ We have a SP? - bne phase2 @ Yes, second stage init + @ Set stack pointer + mov sp, r0 + + @ Set HVBAR to point to the HYP vectors + mcr p15, 4, r1, c12, c0, 0 @ HVBAR @ Set the HTTBR to point to the hypervisor PGD pointer passed mcrr p15, 4, rr_lo_hi(r2, r3), c2 @@ -114,34 +107,25 @@ __do_hyp_init: THUMB( ldr r2, =(HSCTLR_M | HSCTLR_A | HSCTLR_TE) ) orr r1, r1, r2 orr r0, r0, r1 - isb mcr p15, 4, r0, c1, c0, 0 @ HSCR + isb - @ End of init phase-1 eret -phase2: - @ Set stack pointer - mov sp, r0 - - @ Set HVBAR to point to the HYP vectors - mcr p15, 4, r1, c12, c0, 0 @ HVBAR - - @ Jump to the trampoline page - ldr r0, =TRAMPOLINE_VA - adr r1, target - bfi r0, r1, #0, #PAGE_SHIFT - ret r0 + @ r0 : stub vectors address +ENTRY(__kvm_hyp_reset) + /* We're now in idmap, disable MMU */ + mrc p15, 4, r1, c1, c0, 0 @ HSCTLR + ldr r2, =(HSCTLR_M | HSCTLR_A | HSCTLR_C | HSCTLR_I) + bic r1, r1, r2 + mcr p15, 4, r1, c1, c0, 0 @ HSCTLR -target: @ We're now in the trampoline code, switch page tables - mcrr p15, 4, rr_lo_hi(r2, r3), c2 + /* Install stub vectors */ + mcr p15, 4, r0, c12, c0, 0 @ HVBAR isb - @ Invalidate the old TLBs - mcr p15, 4, r0, c8, c7, 0 @ TLBIALLH - dsb ish - eret +ENDPROC(__kvm_hyp_reset) .ltorg diff --git a/arch/arm/kvm/irq.h b/arch/arm/kvm/irq.h new file mode 100644 index 000000000..b74099b90 --- /dev/null +++ b/arch/arm/kvm/irq.h @@ -0,0 +1,19 @@ +/* + * irq.h: in kernel interrupt controller related definitions + * Copyright (c) 2016 Red Hat, Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This header is included by irqchip.c. However, on ARM, interrupt + * controller declarations are located in include/kvm/arm_vgic.h since + * they are mostly shared between arm and arm64. + */ + +#ifndef __IRQ_H +#define __IRQ_H + +#include <kvm/arm_vgic.h> + +#endif diff --git a/arch/arm/kvm/mmu.c b/arch/arm/kvm/mmu.c index 15c8d839c..e9a5c0e0c 100644 --- a/arch/arm/kvm/mmu.c +++ b/arch/arm/kvm/mmu.c @@ -32,8 +32,6 @@ #include "trace.h" -extern char __hyp_idmap_text_start[], __hyp_idmap_text_end[]; - static pgd_t *boot_hyp_pgd; static pgd_t *hyp_pgd; static pgd_t *merged_hyp_pgd; @@ -484,28 +482,6 @@ static void unmap_hyp_range(pgd_t *pgdp, phys_addr_t start, u64 size) } /** - * free_boot_hyp_pgd - free HYP boot page tables - * - * Free the HYP boot page tables. The bounce page is also freed. - */ -void free_boot_hyp_pgd(void) -{ - mutex_lock(&kvm_hyp_pgd_mutex); - - if (boot_hyp_pgd) { - unmap_hyp_range(boot_hyp_pgd, hyp_idmap_start, PAGE_SIZE); - unmap_hyp_range(boot_hyp_pgd, TRAMPOLINE_VA, PAGE_SIZE); - free_pages((unsigned long)boot_hyp_pgd, hyp_pgd_order); - boot_hyp_pgd = NULL; - } - - if (hyp_pgd) - unmap_hyp_range(hyp_pgd, TRAMPOLINE_VA, PAGE_SIZE); - - mutex_unlock(&kvm_hyp_pgd_mutex); -} - -/** * free_hyp_pgds - free Hyp-mode page tables * * Assumes hyp_pgd is a page table used strictly in Hyp-mode and @@ -519,15 +495,20 @@ void free_hyp_pgds(void) { unsigned long addr; - free_boot_hyp_pgd(); - mutex_lock(&kvm_hyp_pgd_mutex); + if (boot_hyp_pgd) { + unmap_hyp_range(boot_hyp_pgd, hyp_idmap_start, PAGE_SIZE); + free_pages((unsigned long)boot_hyp_pgd, hyp_pgd_order); + boot_hyp_pgd = NULL; + } + if (hyp_pgd) { + unmap_hyp_range(hyp_pgd, hyp_idmap_start, PAGE_SIZE); for (addr = PAGE_OFFSET; virt_addr_valid(addr); addr += PGDIR_SIZE) - unmap_hyp_range(hyp_pgd, KERN_TO_HYP(addr), PGDIR_SIZE); + unmap_hyp_range(hyp_pgd, kern_hyp_va(addr), PGDIR_SIZE); for (addr = VMALLOC_START; is_vmalloc_addr((void*)addr); addr += PGDIR_SIZE) - unmap_hyp_range(hyp_pgd, KERN_TO_HYP(addr), PGDIR_SIZE); + unmap_hyp_range(hyp_pgd, kern_hyp_va(addr), PGDIR_SIZE); free_pages((unsigned long)hyp_pgd, hyp_pgd_order); hyp_pgd = NULL; @@ -679,17 +660,18 @@ static phys_addr_t kvm_kaddr_to_phys(void *kaddr) * create_hyp_mappings - duplicate a kernel virtual address range in Hyp mode * @from: The virtual kernel start address of the range * @to: The virtual kernel end address of the range (exclusive) + * @prot: The protection to be applied to this range * * The same virtual address as the kernel virtual address is also used * in Hyp-mode mapping (modulo HYP_PAGE_OFFSET) to the same underlying * physical pages. */ -int create_hyp_mappings(void *from, void *to) +int create_hyp_mappings(void *from, void *to, pgprot_t prot) { phys_addr_t phys_addr; unsigned long virt_addr; - unsigned long start = KERN_TO_HYP((unsigned long)from); - unsigned long end = KERN_TO_HYP((unsigned long)to); + unsigned long start = kern_hyp_va((unsigned long)from); + unsigned long end = kern_hyp_va((unsigned long)to); if (is_kernel_in_hyp_mode()) return 0; @@ -704,7 +686,7 @@ int create_hyp_mappings(void *from, void *to) err = __create_hyp_mappings(hyp_pgd, virt_addr, virt_addr + PAGE_SIZE, __phys_to_pfn(phys_addr), - PAGE_HYP); + prot); if (err) return err; } @@ -723,8 +705,8 @@ int create_hyp_mappings(void *from, void *to) */ int create_hyp_io_mappings(void *from, void *to, phys_addr_t phys_addr) { - unsigned long start = KERN_TO_HYP((unsigned long)from); - unsigned long end = KERN_TO_HYP((unsigned long)to); + unsigned long start = kern_hyp_va((unsigned long)from); + unsigned long end = kern_hyp_va((unsigned long)to); if (is_kernel_in_hyp_mode()) return 0; @@ -1327,7 +1309,7 @@ static int user_mem_abort(struct kvm_vcpu *vcpu, phys_addr_t fault_ipa, smp_rmb(); pfn = gfn_to_pfn_prot(kvm, gfn, write_fault, &writable); - if (is_error_pfn(pfn)) + if (is_error_noslot_pfn(pfn)) return -EFAULT; if (kvm_is_device_pfn(pfn)) { @@ -1687,14 +1669,6 @@ phys_addr_t kvm_mmu_get_httbr(void) return virt_to_phys(hyp_pgd); } -phys_addr_t kvm_mmu_get_boot_httbr(void) -{ - if (__kvm_cpu_uses_extended_idmap()) - return virt_to_phys(merged_hyp_pgd); - else - return virt_to_phys(boot_hyp_pgd); -} - phys_addr_t kvm_get_idmap_vector(void) { return hyp_idmap_vector; @@ -1705,6 +1679,22 @@ phys_addr_t kvm_get_idmap_start(void) return hyp_idmap_start; } +static int kvm_map_idmap_text(pgd_t *pgd) +{ + int err; + + /* Create the idmap in the boot page tables */ + err = __create_hyp_mappings(pgd, + hyp_idmap_start, hyp_idmap_end, + __phys_to_pfn(hyp_idmap_start), + PAGE_HYP_EXEC); + if (err) + kvm_err("Failed to idmap %lx-%lx\n", + hyp_idmap_start, hyp_idmap_end); + + return err; +} + int kvm_mmu_init(void) { int err; @@ -1719,28 +1709,42 @@ int kvm_mmu_init(void) */ BUG_ON((hyp_idmap_start ^ (hyp_idmap_end - 1)) & PAGE_MASK); - hyp_pgd = (pgd_t *)__get_free_pages(GFP_KERNEL | __GFP_ZERO, hyp_pgd_order); - boot_hyp_pgd = (pgd_t *)__get_free_pages(GFP_KERNEL | __GFP_ZERO, hyp_pgd_order); + kvm_info("IDMAP page: %lx\n", hyp_idmap_start); + kvm_info("HYP VA range: %lx:%lx\n", + kern_hyp_va(PAGE_OFFSET), kern_hyp_va(~0UL)); - if (!hyp_pgd || !boot_hyp_pgd) { - kvm_err("Hyp mode PGD not allocated\n"); - err = -ENOMEM; + if (hyp_idmap_start >= kern_hyp_va(PAGE_OFFSET) && + hyp_idmap_start < kern_hyp_va(~0UL) && + hyp_idmap_start != (unsigned long)__hyp_idmap_text_start) { + /* + * The idmap page is intersecting with the VA space, + * it is not safe to continue further. + */ + kvm_err("IDMAP intersecting with HYP VA, unable to continue\n"); + err = -EINVAL; goto out; } - /* Create the idmap in the boot page tables */ - err = __create_hyp_mappings(boot_hyp_pgd, - hyp_idmap_start, hyp_idmap_end, - __phys_to_pfn(hyp_idmap_start), - PAGE_HYP); - - if (err) { - kvm_err("Failed to idmap %lx-%lx\n", - hyp_idmap_start, hyp_idmap_end); + hyp_pgd = (pgd_t *)__get_free_pages(GFP_KERNEL | __GFP_ZERO, hyp_pgd_order); + if (!hyp_pgd) { + kvm_err("Hyp mode PGD not allocated\n"); + err = -ENOMEM; goto out; } if (__kvm_cpu_uses_extended_idmap()) { + boot_hyp_pgd = (pgd_t *)__get_free_pages(GFP_KERNEL | __GFP_ZERO, + hyp_pgd_order); + if (!boot_hyp_pgd) { + kvm_err("Hyp boot PGD not allocated\n"); + err = -ENOMEM; + goto out; + } + + err = kvm_map_idmap_text(boot_hyp_pgd); + if (err) + goto out; + merged_hyp_pgd = (pgd_t *)__get_free_page(GFP_KERNEL | __GFP_ZERO); if (!merged_hyp_pgd) { kvm_err("Failed to allocate extra HYP pgd\n"); @@ -1748,29 +1752,10 @@ int kvm_mmu_init(void) } __kvm_extend_hypmap(boot_hyp_pgd, hyp_pgd, merged_hyp_pgd, hyp_idmap_start); - return 0; - } - - /* Map the very same page at the trampoline VA */ - err = __create_hyp_mappings(boot_hyp_pgd, - TRAMPOLINE_VA, TRAMPOLINE_VA + PAGE_SIZE, - __phys_to_pfn(hyp_idmap_start), - PAGE_HYP); - if (err) { - kvm_err("Failed to map trampoline @%lx into boot HYP pgd\n", - TRAMPOLINE_VA); - goto out; - } - - /* Map the same page again into the runtime page tables */ - err = __create_hyp_mappings(hyp_pgd, - TRAMPOLINE_VA, TRAMPOLINE_VA + PAGE_SIZE, - __phys_to_pfn(hyp_idmap_start), - PAGE_HYP); - if (err) { - kvm_err("Failed to map trampoline @%lx into runtime HYP pgd\n", - TRAMPOLINE_VA); - goto out; + } else { + err = kvm_map_idmap_text(hyp_pgd); + if (err) + goto out; } return 0; diff --git a/arch/arm/kvm/reset.c b/arch/arm/kvm/reset.c index 0048b5a62..4b5e802e5 100644 --- a/arch/arm/kvm/reset.c +++ b/arch/arm/kvm/reset.c @@ -52,7 +52,7 @@ static const struct kvm_irq_level cortexa_vtimer_irq = { * @vcpu: The VCPU pointer * * This function finds the right table above and sets the registers on the - * virtual CPU struct to their architectually defined reset values. + * virtual CPU struct to their architecturally defined reset values. */ int kvm_reset_vcpu(struct kvm_vcpu *vcpu) { diff --git a/arch/arm/lib/Makefile b/arch/arm/lib/Makefile index d8a780799..27f4d9625 100644 --- a/arch/arm/lib/Makefile +++ b/arch/arm/lib/Makefile @@ -29,7 +29,10 @@ else lib-y += io-readsw-armv4.o io-writesw-armv4.o endif -lib-$(CONFIG_ARCH_RPC) += ecard.o io-acorn.o floppydma.o +ifeq ($(CONFIG_ARCH_RPC),y) + lib-y += ecard.o io-acorn.o floppydma.o + AFLAGS_delay-loop.o += -march=armv4 +endif $(obj)/csumpartialcopy.o: $(obj)/csumpartialcopygeneric.S $(obj)/csumpartialcopyuser.o: $(obj)/csumpartialcopygeneric.S diff --git a/arch/arm/lib/delay-loop.S b/arch/arm/lib/delay-loop.S index 518bf6e93..792c59d88 100644 --- a/arch/arm/lib/delay-loop.S +++ b/arch/arm/lib/delay-loop.S @@ -10,6 +10,7 @@ #include <linux/linkage.h> #include <asm/assembler.h> #include <asm/delay.h> + .text .LC0: .word loops_per_jiffy @@ -17,7 +18,6 @@ /* * r0 <= 2000 - * lpj <= 0x01ffffff (max. 3355 bogomips) * HZ <= 1000 */ @@ -25,16 +25,11 @@ ENTRY(__loop_udelay) ldr r2, .LC1 mul r0, r2, r0 ENTRY(__loop_const_udelay) @ 0 <= r0 <= 0x7fffff06 - mov r1, #-1 ldr r2, .LC0 - ldr r2, [r2] @ max = 0x01ffffff - add r0, r0, r1, lsr #32-14 - mov r0, r0, lsr #14 @ max = 0x0001ffff - add r2, r2, r1, lsr #32-10 - mov r2, r2, lsr #10 @ max = 0x00007fff - mul r0, r2, r0 @ max = 2^32-1 - add r0, r0, r1, lsr #32-6 - movs r0, r0, lsr #6 + ldr r2, [r2] + umull r1, r0, r2, r0 + adds r1, r1, #0xffffffff + adcs r0, r0, r0 reteq lr /* diff --git a/arch/arm/mach-artpec/board-artpec6.c b/arch/arm/mach-artpec/board-artpec6.c index 71513df33..a0b1979c2 100644 --- a/arch/arm/mach-artpec/board-artpec6.c +++ b/arch/arm/mach-artpec/board-artpec6.c @@ -13,7 +13,6 @@ #include <linux/irqchip.h> #include <linux/irqchip/arm-gic.h> #include <linux/mfd/syscon.h> -#include <linux/of_platform.h> #include <linux/of.h> #include <linux/of_address.h> #include <linux/clk-provider.h> @@ -44,8 +43,6 @@ static void __init artpec6_init_machine(void) regmap_write(regmap, ARTPEC6_DMACFG_REGNUM, ARTPEC6_DMACFG_UARTS_BURST); }; - - of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL); } static void artpec6_l2c310_write_sec(unsigned long val, unsigned reg) diff --git a/arch/arm/mach-at91/Kconfig b/arch/arm/mach-at91/Kconfig index 08047afdf..5204395ef 100644 --- a/arch/arm/mach-at91/Kconfig +++ b/arch/arm/mach-at91/Kconfig @@ -1,8 +1,8 @@ menuconfig ARCH_AT91 bool "Atmel SoCs" depends on ARCH_MULTI_V4T || ARCH_MULTI_V5 || ARCH_MULTI_V7 - select ARCH_REQUIRE_GPIOLIB select COMMON_CLK_AT91 + select GPIOLIB select PINCTRL select SOC_BUS diff --git a/arch/arm/mach-at91/at91rm9200.c b/arch/arm/mach-at91/at91rm9200.c index 63b4fa25b..d068ec3cd 100644 --- a/arch/arm/mach-at91/at91rm9200.c +++ b/arch/arm/mach-at91/at91rm9200.c @@ -30,7 +30,7 @@ static void __init at91rm9200_dt_device_init(void) if (soc != NULL) soc_dev = soc_device_to_device(soc); - of_platform_populate(NULL, of_default_bus_match_table, NULL, soc_dev); + of_platform_default_populate(NULL, NULL, soc_dev); at91rm9200_pm_init(); } diff --git a/arch/arm/mach-at91/at91sam9.c b/arch/arm/mach-at91/at91sam9.c index cada2a641..ba28e9cc5 100644 --- a/arch/arm/mach-at91/at91sam9.c +++ b/arch/arm/mach-at91/at91sam9.c @@ -61,7 +61,7 @@ static void __init at91sam9_common_init(void) if (soc != NULL) soc_dev = soc_device_to_device(soc); - of_platform_populate(NULL, of_default_bus_match_table, NULL, soc_dev); + of_platform_default_populate(NULL, NULL, soc_dev); } static void __init at91sam9_dt_device_init(void) diff --git a/arch/arm/mach-at91/pm.c b/arch/arm/mach-at91/pm.c index f06270198..b4332b727 100644 --- a/arch/arm/mach-at91/pm.c +++ b/arch/arm/mach-at91/pm.c @@ -22,6 +22,7 @@ #include <linux/of_platform.h> #include <linux/of_address.h> #include <linux/platform_device.h> +#include <linux/platform_data/atmel.h> #include <linux/io.h> #include <linux/clk/at91_pmc.h> @@ -355,7 +356,7 @@ static __init void at91_dt_ramc(void) at91_pm_set_standby(standby); } -void at91rm9200_idle(void) +static void at91rm9200_idle(void) { /* * Disable the processor clock. The processor will be automatically @@ -364,7 +365,7 @@ void at91rm9200_idle(void) writel(AT91_PMC_PCK, pmc + AT91_PMC_SCDR); } -void at91sam9_idle(void) +static void at91sam9_idle(void) { writel(AT91_PMC_PCK, pmc + AT91_PMC_SCDR); cpu_do_idle(); diff --git a/arch/arm/mach-at91/sama5.c b/arch/arm/mach-at91/sama5.c index 922b85f07..b272c45b4 100644 --- a/arch/arm/mach-at91/sama5.c +++ b/arch/arm/mach-at91/sama5.c @@ -68,7 +68,7 @@ static void __init sama5_dt_device_init(void) if (soc != NULL) soc_dev = soc_device_to_device(soc); - of_platform_populate(NULL, of_default_bus_match_table, NULL, soc_dev); + of_platform_default_populate(NULL, NULL, soc_dev); sama5_pm_init(); } diff --git a/arch/arm/mach-bcm/Kconfig b/arch/arm/mach-bcm/Kconfig index 68ab64123..34f0fca0b 100644 --- a/arch/arm/mach-bcm/Kconfig +++ b/arch/arm/mach-bcm/Kconfig @@ -17,7 +17,7 @@ config ARCH_BCM_IPROC select ARM_GLOBAL_TIMER select COMMON_CLK_IPROC select CLKSRC_MMIO - select ARCH_REQUIRE_GPIOLIB + select GPIOLIB select ARM_AMBA select PINCTRL help @@ -80,7 +80,7 @@ comment "KONA architected SoCs" config ARCH_BCM_MOBILE bool - select ARCH_REQUIRE_GPIOLIB + select GPIOLIB select ARM_ERRATA_754322 select ARM_ERRATA_775420 select ARM_GIC @@ -89,6 +89,7 @@ config ARCH_BCM_MOBILE select HAVE_ARM_ARCH_TIMER select PINCTRL select ARCH_BCM_MOBILE_SMP if SMP + select BCM_KONA_TIMER help This enables support for systems based on Broadcom mobile SoCs. @@ -111,9 +112,17 @@ config ARCH_BCM_21664 Enable support for the BCM21664 family, which includes BCM21663 and BCM21664 variants. +config ARCH_BCM_23550 + bool "Broadcom BCM23550 SoC" + depends on ARCH_MULTI_V7 + select ARCH_BCM_MOBILE + select HAVE_SMP + help + Enable support for the BCM23550. + config ARCH_BCM_MOBILE_L2_CACHE bool "Broadcom mobile SoC level 2 cache support" - depends on ARCH_BCM_MOBILE + depends on ARCH_BCM_281XX || ARCH_BCM_21664 default y select CACHE_L2X0 select ARCH_BCM_MOBILE_SMC @@ -128,7 +137,7 @@ config ARCH_BCM_MOBILE_SMP select HAVE_ARM_SCU select ARM_ERRATA_764369 help - SMP support for the BCM281XX and BCM21664 SoC families. + SMP support for the BCM281XX, BCM21664 and BCM23550 SoC families. Provided as an option so SMP support for SoCs of this type can be disabled for an SMP-enabled kernel. @@ -137,12 +146,13 @@ comment "Other Architectures" config ARCH_BCM2835 bool "Broadcom BCM2835 family" depends on ARCH_MULTI_V6 || ARCH_MULTI_V7 - select ARCH_REQUIRE_GPIOLIB + select GPIOLIB select ARM_AMBA select ARM_ERRATA_411920 if ARCH_MULTI_V6 select ARM_TIMER_SP804 select HAVE_ARM_ARCH_TIMER if ARCH_MULTI_V7 select CLKSRC_OF + select BCM2835_TIMER select PINCTRL select PINCTRL_BCM2835 help @@ -176,7 +186,6 @@ config ARCH_BRCMSTB select BRCMSTB_L2_IRQ select BCM7120_L2_IRQ select ARCH_DMA_ADDR_T_64BIT if ARM_LPAE - select ARCH_WANT_OPTIONAL_GPIOLIB select SOC_BRCMSTB select SOC_BUS help diff --git a/arch/arm/mach-bcm/Makefile b/arch/arm/mach-bcm/Makefile index 7d665151c..980f58500 100644 --- a/arch/arm/mach-bcm/Makefile +++ b/arch/arm/mach-bcm/Makefile @@ -26,7 +26,10 @@ obj-$(CONFIG_ARCH_BCM_281XX) += board_bcm281xx.o # BCM21664 obj-$(CONFIG_ARCH_BCM_21664) += board_bcm21664.o -# BCM281XX and BCM21664 SMP support +# BCM23550 +obj-$(CONFIG_ARCH_BCM_23550) += board_bcm23550.o + +# BCM281XX, BCM21664 and BCM23550 SMP support obj-$(CONFIG_ARCH_BCM_MOBILE_SMP) += platsmp.o # BCM281XX and BCM21664 L2 cache control diff --git a/arch/arm/mach-bcm/board_bcm21664.c b/arch/arm/mach-bcm/board_bcm21664.c index 82ad56877..c5bf01641 100644 --- a/arch/arm/mach-bcm/board_bcm21664.c +++ b/arch/arm/mach-bcm/board_bcm21664.c @@ -11,56 +11,12 @@ * GNU General Public License for more details. */ -#include <linux/of_address.h> -#include <linux/of_platform.h> -#include <linux/io.h> - #include <asm/mach/arch.h> #include "kona_l2_cache.h" -#define RSTMGR_DT_STRING "brcm,bcm21664-resetmgr" - -#define RSTMGR_REG_WR_ACCESS_OFFSET 0 -#define RSTMGR_REG_CHIP_SOFT_RST_OFFSET 4 - -#define RSTMGR_WR_PASSWORD 0xa5a5 -#define RSTMGR_WR_PASSWORD_SHIFT 8 -#define RSTMGR_WR_ACCESS_ENABLE 1 - -static void bcm21664_restart(enum reboot_mode mode, const char *cmd) -{ - void __iomem *base; - struct device_node *resetmgr; - - resetmgr = of_find_compatible_node(NULL, NULL, RSTMGR_DT_STRING); - if (!resetmgr) { - pr_emerg("Couldn't find " RSTMGR_DT_STRING "\n"); - return; - } - base = of_iomap(resetmgr, 0); - if (!base) { - pr_emerg("Couldn't map " RSTMGR_DT_STRING "\n"); - return; - } - - /* - * A soft reset is triggered by writing a 0 to bit 0 of the soft reset - * register. To write to that register we must first write the password - * and the enable bit in the write access enable register. - */ - writel((RSTMGR_WR_PASSWORD << RSTMGR_WR_PASSWORD_SHIFT) | - RSTMGR_WR_ACCESS_ENABLE, - base + RSTMGR_REG_WR_ACCESS_OFFSET); - writel(0, base + RSTMGR_REG_CHIP_SOFT_RST_OFFSET); - - /* Wait for reset */ - while (1); -} - static void __init bcm21664_init(void) { - of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL); kona_l2_cache_init(); } @@ -71,6 +27,5 @@ static const char * const bcm21664_dt_compat[] = { DT_MACHINE_START(BCM21664_DT, "BCM21664 Broadcom Application Processor") .init_machine = bcm21664_init, - .restart = bcm21664_restart, .dt_compat = bcm21664_dt_compat, MACHINE_END diff --git a/arch/arm/mach-bcm/board_bcm23550.c b/arch/arm/mach-bcm/board_bcm23550.c new file mode 100644 index 000000000..0ac01debd --- /dev/null +++ b/arch/arm/mach-bcm/board_bcm23550.c @@ -0,0 +1,25 @@ +/* + * Copyright (C) 2016 Broadcom + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation version 2. + * + * This program is distributed "as is" WITHOUT ANY WARRANTY of any + * kind, whether express or implied; without even the implied warranty + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <linux/of_platform.h> + +#include <asm/mach/arch.h> + +static const char * const bcm23550_dt_compat[] = { + "brcm,bcm23550", + NULL, +}; + +DT_MACHINE_START(BCM23550_DT, "BCM23550 Broadcom Application Processor") + .dt_compat = bcm23550_dt_compat, +MACHINE_END diff --git a/arch/arm/mach-bcm/board_bcm281xx.c b/arch/arm/mach-bcm/board_bcm281xx.c index 2e367bd7c..b81bb3869 100644 --- a/arch/arm/mach-bcm/board_bcm281xx.c +++ b/arch/arm/mach-bcm/board_bcm281xx.c @@ -13,7 +13,6 @@ #include <linux/clocksource.h> #include <linux/of_address.h> -#include <linux/of_platform.h> #include <asm/mach/arch.h> @@ -58,7 +57,6 @@ static void bcm281xx_restart(enum reboot_mode mode, const char *cmd) static void __init bcm281xx_init(void) { - of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL); kona_l2_cache_init(); } diff --git a/arch/arm/mach-bcm/board_bcm2835.c b/arch/arm/mach-bcm/board_bcm2835.c index 834d67684..0c1edfc98 100644 --- a/arch/arm/mach-bcm/board_bcm2835.c +++ b/arch/arm/mach-bcm/board_bcm2835.c @@ -15,7 +15,6 @@ #include <linux/init.h> #include <linux/irqchip.h> #include <linux/of_address.h> -#include <linux/of_platform.h> #include <linux/clk/bcm2835.h> #include <asm/mach/arch.h> @@ -23,16 +22,7 @@ static void __init bcm2835_init(void) { - int ret; - bcm2835_init_clocks(); - - ret = of_platform_populate(NULL, of_default_bus_match_table, NULL, - NULL); - if (ret) { - pr_err("of_platform_populate failed: %d\n", ret); - BUG(); - } } static const char * const bcm2835_compat[] = { diff --git a/arch/arm/mach-bcm/kona_l2_cache.c b/arch/arm/mach-bcm/kona_l2_cache.c index b31970377..59ad86304 100644 --- a/arch/arm/mach-bcm/kona_l2_cache.c +++ b/arch/arm/mach-bcm/kona_l2_cache.c @@ -17,6 +17,7 @@ #include <asm/hardware/cache-l2x0.h> #include "bcm_kona_smc.h" +#include "kona_l2_cache.h" void __init kona_l2_cache_init(void) { diff --git a/arch/arm/mach-bcm/platsmp.c b/arch/arm/mach-bcm/platsmp.c index cfae9c71f..3ac3a9bc6 100644 --- a/arch/arm/mach-bcm/platsmp.c +++ b/arch/arm/mach-bcm/platsmp.c @@ -19,6 +19,7 @@ #include <linux/io.h> #include <linux/jiffies.h> #include <linux/of.h> +#include <linux/of_address.h> #include <linux/sched.h> #include <linux/smp.h> @@ -37,9 +38,6 @@ #define OF_SECONDARY_BOOT "secondary-boot-reg" #define MPIDR_CPUID_BITMASK 0x3 -/* I/O address of register used to coordinate secondary core startup */ -static u32 secondary_boot_addr; - /* * Enable the Cortex A9 Snoop Control Unit * @@ -81,20 +79,40 @@ static int __init scu_a9_enable(void) return 0; } -static int nsp_write_lut(void) +static u32 secondary_boot_addr_for(unsigned int cpu) +{ + u32 secondary_boot_addr = 0; + struct device_node *cpu_node = of_get_cpu_node(cpu, NULL); + + if (!cpu_node) { + pr_err("Failed to find device tree node for CPU%u\n", cpu); + return 0; + } + + if (of_property_read_u32(cpu_node, + OF_SECONDARY_BOOT, + &secondary_boot_addr)) + pr_err("required secondary boot register not specified for CPU%u\n", + cpu); + + of_node_put(cpu_node); + + return secondary_boot_addr; +} + +static int nsp_write_lut(unsigned int cpu) { void __iomem *sku_rom_lut; phys_addr_t secondary_startup_phy; + const u32 secondary_boot_addr = secondary_boot_addr_for(cpu); - if (!secondary_boot_addr) { - pr_warn("required secondary boot register not specified\n"); + if (!secondary_boot_addr) return -EINVAL; - } sku_rom_lut = ioremap_nocache((phys_addr_t)secondary_boot_addr, - sizeof(secondary_boot_addr)); + sizeof(phys_addr_t)); if (!sku_rom_lut) { - pr_warn("unable to ioremap SKU-ROM LUT register\n"); + pr_warn("unable to ioremap SKU-ROM LUT register for cpu %u\n", cpu); return -ENOMEM; } @@ -113,70 +131,12 @@ static int nsp_write_lut(void) static void __init bcm_smp_prepare_cpus(unsigned int max_cpus) { - static cpumask_t only_cpu_0 = { CPU_BITS_CPU0 }; - struct device_node *cpus_node = NULL; - struct device_node *cpu_node = NULL; - int ret; - - /* - * This function is only called via smp_ops->smp_prepare_cpu(). - * That only happens if a "/cpus" device tree node exists - * and has an "enable-method" property that selects the SMP - * operations defined herein. - */ - cpus_node = of_find_node_by_path("/cpus"); - if (!cpus_node) - return; - - for_each_child_of_node(cpus_node, cpu_node) { - u32 cpuid; - - if (of_node_cmp(cpu_node->type, "cpu")) - continue; - - if (of_property_read_u32(cpu_node, "reg", &cpuid)) { - pr_debug("%s: missing reg property\n", - cpu_node->full_name); - ret = -ENOENT; - goto out; - } - - /* - * "secondary-boot-reg" property should be defined only - * for secondary cpu - */ - if ((cpuid & MPIDR_CPUID_BITMASK) == 1) { - /* - * Our secondary enable method requires a - * "secondary-boot-reg" property to specify a register - * address used to request the ROM code boot a secondary - * core. If we have any trouble getting this we fall - * back to uniprocessor mode. - */ - if (of_property_read_u32(cpu_node, - OF_SECONDARY_BOOT, - &secondary_boot_addr)) { - pr_warn("%s: no" OF_SECONDARY_BOOT "property\n", - cpu_node->name); - ret = -ENOENT; - goto out; - } - } - } - - /* - * Enable the SCU on Cortex A9 based SoCs. If -ENOENT is - * returned, the SoC reported a uniprocessor configuration. - * We bail on any other error. - */ - ret = scu_a9_enable(); -out: - of_node_put(cpu_node); - of_node_put(cpus_node); + const cpumask_t only_cpu_0 = { CPU_BITS_CPU0 }; - if (ret) { + /* Enable the SCU on Cortex A9 based SoCs */ + if (scu_a9_enable()) { /* Update the CPU present map to reflect uniprocessor mode */ - pr_warn("disabling SMP\n"); + pr_warn("failed to enable A9 SCU - disabling SMP\n"); init_cpu_present(&only_cpu_0); } } @@ -207,6 +167,7 @@ static int kona_boot_secondary(unsigned int cpu, struct task_struct *idle) u32 cpu_id; u32 boot_val; bool timeout = false; + const u32 secondary_boot_addr = secondary_boot_addr_for(cpu); cpu_id = cpu_logical_map(cpu); if (cpu_id & ~BOOT_ADDR_CPUID_MASK) { @@ -214,13 +175,11 @@ static int kona_boot_secondary(unsigned int cpu, struct task_struct *idle) return -EINVAL; } - if (!secondary_boot_addr) { - pr_err("required secondary boot register not specified\n"); + if (!secondary_boot_addr) return -EINVAL; - } - boot_reg = ioremap_nocache( - (phys_addr_t)secondary_boot_addr, sizeof(u32)); + boot_reg = ioremap_nocache((phys_addr_t)secondary_boot_addr, + sizeof(phys_addr_t)); if (!boot_reg) { pr_err("unable to map boot register for cpu %u\n", cpu_id); return -ENOMEM; @@ -255,6 +214,57 @@ static int kona_boot_secondary(unsigned int cpu, struct task_struct *idle) return -ENXIO; } +/* Cluster Dormant Control command to bring CPU into a running state */ +#define CDC_CMD 6 +#define CDC_CMD_OFFSET 0 +#define CDC_CMD_REG(cpu) (CDC_CMD_OFFSET + 4*(cpu)) + +/* + * BCM23550 has a Cluster Dormant Control block that keeps the core in + * idle state. A command needs to be sent to the block to bring the CPU + * into running state. + */ +static int bcm23550_boot_secondary(unsigned int cpu, struct task_struct *idle) +{ + void __iomem *cdc_base; + struct device_node *dn; + char *name; + int ret; + + /* Make sure a CDC node exists before booting the + * secondary core. + */ + name = "brcm,bcm23550-cdc"; + dn = of_find_compatible_node(NULL, NULL, name); + if (!dn) { + pr_err("unable to find cdc node\n"); + return -ENODEV; + } + + cdc_base = of_iomap(dn, 0); + of_node_put(dn); + + if (!cdc_base) { + pr_err("unable to remap cdc base register\n"); + return -ENOMEM; + } + + /* Boot the secondary core */ + ret = kona_boot_secondary(cpu, idle); + if (ret) + goto out; + + /* Bring this CPU to RUN state so that nIRQ nFIQ + * signals are unblocked. + */ + writel_relaxed(CDC_CMD, cdc_base + CDC_CMD_REG(cpu)); + +out: + iounmap(cdc_base); + + return ret; +} + static int nsp_boot_secondary(unsigned int cpu, struct task_struct *idle) { int ret; @@ -263,7 +273,7 @@ static int nsp_boot_secondary(unsigned int cpu, struct task_struct *idle) * After wake up, secondary core branches to the startup * address programmed at SKU ROM LUT location. */ - ret = nsp_write_lut(); + ret = nsp_write_lut(cpu); if (ret) { pr_err("unable to write startup addr to SKU ROM LUT\n"); goto out; @@ -276,12 +286,18 @@ out: return ret; } -static const struct smp_operations bcm_smp_ops __initconst = { +static const struct smp_operations kona_smp_ops __initconst = { .smp_prepare_cpus = bcm_smp_prepare_cpus, .smp_boot_secondary = kona_boot_secondary, }; CPU_METHOD_OF_DECLARE(bcm_smp_bcm281xx, "brcm,bcm11351-cpu-method", - &bcm_smp_ops); + &kona_smp_ops); + +static const struct smp_operations bcm23550_smp_ops __initconst = { + .smp_boot_secondary = bcm23550_boot_secondary, +}; +CPU_METHOD_OF_DECLARE(bcm_smp_bcm23550, "brcm,bcm23550", + &bcm23550_smp_ops); static const struct smp_operations nsp_smp_ops __initconst = { .smp_prepare_cpus = bcm_smp_prepare_cpus, diff --git a/arch/arm/mach-berlin/Kconfig b/arch/arm/mach-berlin/Kconfig index ffbfa0bd0..63ab1d368 100644 --- a/arch/arm/mach-berlin/Kconfig +++ b/arch/arm/mach-berlin/Kconfig @@ -2,11 +2,11 @@ menuconfig ARCH_BERLIN bool "Marvell Berlin SoCs" depends on ARCH_MULTI_V7 select ARCH_HAS_RESET_CONTROLLER - select ARCH_REQUIRE_GPIOLIB select ARM_GIC select DW_APB_ICTL select DW_APB_TIMER_OF select GENERIC_IRQ_CHIP + select GPIOLIB select MFD_SYSCON select PINCTRL diff --git a/arch/arm/mach-clps711x/Kconfig b/arch/arm/mach-clps711x/Kconfig index f711498c1..61284b938 100644 --- a/arch/arm/mach-clps711x/Kconfig +++ b/arch/arm/mach-clps711x/Kconfig @@ -1,38 +1,15 @@ -if ARCH_CLPS711X - -menu "CLPS711X/EP721X/EP731X Implementations" - -config ARCH_AUTCPU12 - bool "AUTCPU12" - help - Say Y if you intend to run the kernel on the autronix autcpu12 - board. This board is based on a Cirrus Logic CS89712. - -config ARCH_CDB89712 - bool "CDB89712" - help - This is an evaluation board from Cirrus for the CS89712 processor. - The board includes 2 serial ports, Ethernet, IRDA, and expansion - headers. It comes with 16 MB SDRAM and 8 MB flash ROM. - -config ARCH_CLEP7312 - bool "CLEP7312" - help - Boards based on the Cirrus Logic 7212/7312 chips. - -config ARCH_EDB7211 - bool "EDB7211" - select ARCH_HAS_HOLES_MEMORYMODEL - help - Say Y here if you intend to run this kernel on a Cirrus Logic EDB-7211 - evaluation board. - -config ARCH_P720T - bool "P720T" - help - Say Y here if you intend to run this kernel on the ARM Prospector - 720T. - -endmenu - -endif +menuconfig ARCH_CLPS711X + bool "Cirrus Logic EP721x/EP731x-based" + depends on ARCH_MULTI_V4T + select AUTO_ZRELADDR + select CLKSRC_OF + select CLPS711X_TIMER + select COMMON_CLK + select CPU_ARM720T + select GENERIC_CLOCKEVENTS + select GPIOLIB + select MFD_SYSCON + select OF_IRQ + select USE_OF + help + Select this if you use ARMv4T Cirrus Logic chips. diff --git a/arch/arm/mach-clps711x/Makefile b/arch/arm/mach-clps711x/Makefile index f04151efd..bd0b7b5d6 100644 --- a/arch/arm/mach-clps711x/Makefile +++ b/arch/arm/mach-clps711x/Makefile @@ -1,13 +1 @@ -# -# Makefile for the linux kernel. -# - -# Object file lists. - -obj-y := common.o devices.o - -obj-$(CONFIG_ARCH_AUTCPU12) += board-autcpu12.o -obj-$(CONFIG_ARCH_CDB89712) += board-cdb89712.o -obj-$(CONFIG_ARCH_CLEP7312) += board-clep7312.o -obj-$(CONFIG_ARCH_EDB7211) += board-edb7211.o -obj-$(CONFIG_ARCH_P720T) += board-p720t.o +obj-y += board-dt.o diff --git a/arch/arm/mach-clps711x/Makefile.boot b/arch/arm/mach-clps711x/Makefile.boot index eba77d35a..e69de29bb 100644 --- a/arch/arm/mach-clps711x/Makefile.boot +++ b/arch/arm/mach-clps711x/Makefile.boot @@ -1,5 +0,0 @@ -# The standard locations for stuff on CLPS711x type processors -params_phys-y := 0xc0000100 -# Should probably have some agreement on these... -initrd_phys-$(CONFIG_ARCH_P720T) := 0xc0400000 -initrd_phys-$(CONFIG_ARCH_CDB89712) := 0x00700000 diff --git a/arch/arm/mach-clps711x/board-dt.c b/arch/arm/mach-clps711x/board-dt.c new file mode 100644 index 000000000..ee1f83b1a --- /dev/null +++ b/arch/arm/mach-clps711x/board-dt.c @@ -0,0 +1,82 @@ +/* + * Author: Alexander Shiyan <shc_work@mail.ru>, 2016 + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#include <linux/io.h> +#include <linux/of_fdt.h> +#include <linux/platform_device.h> +#include <linux/random.h> +#include <linux/sizes.h> + +#include <linux/mfd/syscon/clps711x.h> + +#include <asm/system_info.h> +#include <asm/system_misc.h> +#include <asm/mach/arch.h> +#include <asm/mach/map.h> + +#define CLPS711X_VIRT_BASE IOMEM(0xfeff4000) +#define CLPS711X_PHYS_BASE (0x80000000) +# define SYSFLG1 (0x0140) +# define HALT (0x0800) +# define UNIQID (0x2440) +# define RANDID0 (0x2700) +# define RANDID1 (0x2704) +# define RANDID2 (0x2708) +# define RANDID3 (0x270c) + +static struct map_desc clps711x_io_desc __initdata = { + .virtual = (unsigned long)CLPS711X_VIRT_BASE, + .pfn = __phys_to_pfn(CLPS711X_PHYS_BASE), + .length = 48 * SZ_1K, + .type = MT_DEVICE, +}; + +static void __init clps711x_map_io(void) +{ + iotable_init(&clps711x_io_desc, 1); +} + +static const struct resource clps711x_cpuidle_res = + DEFINE_RES_MEM(CLPS711X_PHYS_BASE + HALT, SZ_128); + +static void __init clps711x_init(void) +{ + u32 id[5]; + + id[0] = readl(CLPS711X_VIRT_BASE + UNIQID); + id[1] = readl(CLPS711X_VIRT_BASE + RANDID0); + id[2] = readl(CLPS711X_VIRT_BASE + RANDID1); + id[3] = readl(CLPS711X_VIRT_BASE + RANDID2); + id[4] = readl(CLPS711X_VIRT_BASE + RANDID3); + system_rev = SYSFLG1_VERID(readl(CLPS711X_VIRT_BASE + SYSFLG1)); + + add_device_randomness(id, sizeof(id)); + + system_serial_low = id[0]; + + platform_device_register_simple("clps711x-cpuidle", PLATFORM_DEVID_NONE, + &clps711x_cpuidle_res, 1); +} + +static void clps711x_restart(enum reboot_mode mode, const char *cmd) +{ + soft_restart(0); +} + +static const char *clps711x_compat[] __initconst = { + "cirrus,ep7209", + NULL +}; + +DT_MACHINE_START(CLPS711X_DT, "Cirrus Logic CLPS711X (Device Tree Support)") + .dt_compat = clps711x_compat, + .map_io = clps711x_map_io, + .init_late = clps711x_init, + .restart = clps711x_restart, +MACHINE_END diff --git a/arch/arm/mach-clps711x/common.c b/arch/arm/mach-clps711x/common.c index 671acc5a3..6466da8f3 100644 --- a/arch/arm/mach-clps711x/common.c +++ b/arch/arm/mach-clps711x/common.c @@ -37,8 +37,8 @@ static struct map_desc clps711x_io_desc[] __initdata = { { .virtual = (unsigned long)CLPS711X_VIRT_BASE, .pfn = __phys_to_pfn(CLPS711X_PHYS_BASE), - .length = SZ_64K, - .type = MT_DEVICE + .length = 48 * SZ_1K, + .type = MT_DEVICE, } }; diff --git a/arch/arm/mach-cns3xxx/core.c b/arch/arm/mach-cns3xxx/core.c index 9b1dc223d..03da3813f 100644 --- a/arch/arm/mach-cns3xxx/core.c +++ b/arch/arm/mach-cns3xxx/core.c @@ -395,8 +395,7 @@ static void __init cns3xxx_init(void) pm_power_off = cns3xxx_power_off; - of_platform_populate(NULL, of_default_bus_match_table, - cns3xxx_auxdata, NULL); + of_platform_default_populate(NULL, cns3xxx_auxdata, NULL); } static const char *const cns3xxx_dt_compat[] __initconst = { diff --git a/arch/arm/mach-davinci/board-dm355-evm.c b/arch/arm/mach-davinci/board-dm355-evm.c index 1844076f6..18296a99c 100644 --- a/arch/arm/mach-davinci/board-dm355-evm.c +++ b/arch/arm/mach-davinci/board-dm355-evm.c @@ -115,8 +115,6 @@ static struct davinci_i2c_platform_data i2c_pdata = { .scl_pin = 14, }; -static struct snd_platform_data dm355_evm_snd_data; - static int dm355evm_mmc_gpios = -EINVAL; static void dm355evm_mmcsd_gpios(unsigned gpio) @@ -411,7 +409,7 @@ static __init void dm355_evm_init(void) ARRAY_SIZE(dm355_evm_spi_info)); /* DM335 EVM uses ASP1; line-out is a stereo mini-jack */ - dm355_init_asp1(ASP1_TX_EVT_EN | ASP1_RX_EVT_EN, &dm355_evm_snd_data); + dm355_init_asp1(ASP1_TX_EVT_EN | ASP1_RX_EVT_EN); } MACHINE_START(DAVINCI_DM355_EVM, "DaVinci DM355 EVM") diff --git a/arch/arm/mach-davinci/board-dm365-evm.c b/arch/arm/mach-davinci/board-dm365-evm.c index f073518f6..0464999b7 100644 --- a/arch/arm/mach-davinci/board-dm365-evm.c +++ b/arch/arm/mach-davinci/board-dm365-evm.c @@ -176,10 +176,6 @@ static struct at24_platform_data eeprom_info = { .context = (void *)0x7f00, }; -static struct snd_platform_data dm365_evm_snd_data __maybe_unused = { - .asp_chan_q = EVENTQ_3, -}; - static struct i2c_board_info i2c_info[] = { { I2C_BOARD_INFO("24c256", 0x50), @@ -763,9 +759,9 @@ static __init void dm365_evm_init(void) evm_init_cpld(); #ifdef CONFIG_SND_DM365_AIC3X_CODEC - dm365_init_asp(&dm365_evm_snd_data); + dm365_init_asp(); #elif defined(CONFIG_SND_DM365_VOICE_CODEC) - dm365_init_vc(&dm365_evm_snd_data); + dm365_init_vc(); #endif dm365_init_rtc(); dm365_init_ks(&dm365evm_ks_data); diff --git a/arch/arm/mach-davinci/board-dm644x-evm.c b/arch/arm/mach-davinci/board-dm644x-evm.c index 68cc09907..521e40977 100644 --- a/arch/arm/mach-davinci/board-dm644x-evm.c +++ b/arch/arm/mach-davinci/board-dm644x-evm.c @@ -264,8 +264,6 @@ static struct platform_device rtc_dev = { .id = -1, }; -static struct snd_platform_data dm644x_evm_snd_data; - /*----------------------------------------------------------------------*/ #ifdef CONFIG_I2C /* @@ -288,7 +286,7 @@ static struct gpio_led evm_leds[] = { { .name = "DS2", .active_low = 1, .default_trigger = "mmc0", }, { .name = "DS1", .active_low = 1, - .default_trigger = "ide-disk", }, + .default_trigger = "disk-activity", }, }; static const struct gpio_led_platform_data evm_led_data = { @@ -799,7 +797,7 @@ static __init void davinci_evm_init(void) dm644x_init_video(&dm644xevm_capture_cfg, &dm644xevm_display_cfg); davinci_serial_init(dm644x_serial_device); - dm644x_init_asp(&dm644x_evm_snd_data); + dm644x_init_asp(); /* irlml6401 switches over 1A, in under 8 msec */ davinci_setup_usb(1000, 8); diff --git a/arch/arm/mach-davinci/board-neuros-osd2.c b/arch/arm/mach-davinci/board-neuros-osd2.c index 8fcdcf87c..ad1001720 100644 --- a/arch/arm/mach-davinci/board-neuros-osd2.c +++ b/arch/arm/mach-davinci/board-neuros-osd2.c @@ -127,8 +127,6 @@ static struct platform_device davinci_fb_device = { .num_resources = 0, }; -static struct snd_platform_data dm644x_ntosd2_snd_data; - static struct gpio_led ntosd2_leds[] = { { .name = "led1_green", .gpio = GPIO(10), }, { .name = "led1_red", .gpio = GPIO(11), }, @@ -200,7 +198,7 @@ static __init void davinci_ntosd2_init(void) ARRAY_SIZE(davinci_ntosd2_devices)); davinci_serial_init(dm644x_serial_device); - dm644x_init_asp(&dm644x_ntosd2_snd_data); + dm644x_init_asp(); soc_info->emac_pdata->phy_id = NEUROS_OSD2_PHY_ID; diff --git a/arch/arm/mach-davinci/da850.c b/arch/arm/mach-davinci/da850.c index 239886299..0d046accb 100644 --- a/arch/arm/mach-davinci/da850.c +++ b/arch/arm/mach-davinci/da850.c @@ -326,6 +326,20 @@ static struct clk mcasp_clk = { .gpsc = 1, }; +static struct clk mcbsp0_clk = { + .name = "mcbsp0", + .parent = &async3_clk, + .lpsc = DA850_LPSC1_McBSP0, + .gpsc = 1, +}; + +static struct clk mcbsp1_clk = { + .name = "mcbsp1", + .parent = &async3_clk, + .lpsc = DA850_LPSC1_McBSP1, + .gpsc = 1, +}; + static struct clk lcdc_clk = { .name = "lcdc", .parent = &pll0_sysclk2, @@ -482,6 +496,8 @@ static struct clk_lookup da850_clks[] = { CLK("davinci_emac.1", NULL, &emac_clk), CLK("davinci_mdio.0", "fck", &emac_clk), CLK("davinci-mcasp.0", NULL, &mcasp_clk), + CLK("davinci-mcbsp.0", NULL, &mcbsp0_clk), + CLK("davinci-mcbsp.1", NULL, &mcbsp1_clk), CLK("da8xx_lcdc.0", "fck", &lcdc_clk), CLK("da830-mmc.0", NULL, &mmcsd0_clk), CLK("da830-mmc.1", NULL, &mmcsd1_clk), diff --git a/arch/arm/mach-davinci/davinci.h b/arch/arm/mach-davinci/davinci.h index 4ffc37acc..c62b90c61 100644 --- a/arch/arm/mach-davinci/davinci.h +++ b/arch/arm/mach-davinci/davinci.h @@ -85,14 +85,14 @@ int davinci_init_wdt(void); void dm355_init(void); void dm355_init_spi0(unsigned chipselect_mask, const struct spi_board_info *info, unsigned len); -void dm355_init_asp1(u32 evt_enable, struct snd_platform_data *pdata); +void dm355_init_asp1(u32 evt_enable); int dm355_init_video(struct vpfe_config *, struct vpbe_config *); int dm355_gpio_register(void); /* DM365 function declarations */ void dm365_init(void); -void dm365_init_asp(struct snd_platform_data *pdata); -void dm365_init_vc(struct snd_platform_data *pdata); +void dm365_init_asp(void); +void dm365_init_vc(void); void dm365_init_ks(struct davinci_ks_platform_data *pdata); void dm365_init_rtc(void); void dm365_init_spi0(unsigned chipselect_mask, @@ -102,7 +102,7 @@ int dm365_gpio_register(void); /* DM644x function declarations */ void dm644x_init(void); -void dm644x_init_asp(struct snd_platform_data *pdata); +void dm644x_init_asp(void); int dm644x_init_video(struct vpfe_config *, struct vpbe_config *); int dm644x_gpio_register(void); diff --git a/arch/arm/mach-davinci/dm355.c b/arch/arm/mach-davinci/dm355.c index 5a19cca7e..d33322dde 100644 --- a/arch/arm/mach-davinci/dm355.c +++ b/arch/arm/mach-davinci/dm355.c @@ -1035,7 +1035,7 @@ static struct davinci_soc_info davinci_soc_info_dm355 = { .sram_len = SZ_32K, }; -void __init dm355_init_asp1(u32 evt_enable, struct snd_platform_data *pdata) +void __init dm355_init_asp1(u32 evt_enable) { /* we don't use ASP1 IRQs, or we'd need to mux them ... */ if (evt_enable & ASP1_TX_EVT_EN) @@ -1044,7 +1044,6 @@ void __init dm355_init_asp1(u32 evt_enable, struct snd_platform_data *pdata) if (evt_enable & ASP1_RX_EVT_EN) davinci_cfg_reg(DM355_EVT9_ASP1_RX); - dm355_asp1_device.dev.platform_data = pdata; platform_device_register(&dm355_asp1_device); } diff --git a/arch/arm/mach-davinci/dm365.c b/arch/arm/mach-davinci/dm365.c index 8aa004b02..ef3add999 100644 --- a/arch/arm/mach-davinci/dm365.c +++ b/arch/arm/mach-davinci/dm365.c @@ -1138,7 +1138,7 @@ static struct davinci_soc_info davinci_soc_info_dm365 = { .sram_len = SZ_32K, }; -void __init dm365_init_asp(struct snd_platform_data *pdata) +void __init dm365_init_asp(void) { davinci_cfg_reg(DM365_MCBSP0_BDX); davinci_cfg_reg(DM365_MCBSP0_X); @@ -1148,15 +1148,13 @@ void __init dm365_init_asp(struct snd_platform_data *pdata) davinci_cfg_reg(DM365_MCBSP0_BFSR); davinci_cfg_reg(DM365_EVT2_ASP_TX); davinci_cfg_reg(DM365_EVT3_ASP_RX); - dm365_asp_device.dev.platform_data = pdata; platform_device_register(&dm365_asp_device); } -void __init dm365_init_vc(struct snd_platform_data *pdata) +void __init dm365_init_vc(void) { davinci_cfg_reg(DM365_EVT2_VC_TX); davinci_cfg_reg(DM365_EVT3_VC_RX); - dm365_vc_device.dev.platform_data = pdata; platform_device_register(&dm365_vc_device); } diff --git a/arch/arm/mach-davinci/dm644x.c b/arch/arm/mach-davinci/dm644x.c index 0afa279ec..b437c3730 100644 --- a/arch/arm/mach-davinci/dm644x.c +++ b/arch/arm/mach-davinci/dm644x.c @@ -921,10 +921,9 @@ static struct davinci_soc_info davinci_soc_info_dm644x = { .sram_len = SZ_16K, }; -void __init dm644x_init_asp(struct snd_platform_data *pdata) +void __init dm644x_init_asp(void) { davinci_cfg_reg(DM644X_MCBSP); - dm644x_asp_device.dev.platform_data = pdata; platform_device_register(&dm644x_asp_device); } diff --git a/arch/arm/mach-davinci/psc.h b/arch/arm/mach-davinci/psc.h index 99d47cfa3..8af9f09fc 100644 --- a/arch/arm/mach-davinci/psc.h +++ b/arch/arm/mach-davinci/psc.h @@ -171,6 +171,8 @@ #define DA8XX_LPSC1_I2C 11 #define DA8XX_LPSC1_UART1 12 #define DA8XX_LPSC1_UART2 13 +#define DA850_LPSC1_McBSP0 14 +#define DA850_LPSC1_McBSP1 15 #define DA8XX_LPSC1_LCDC 16 #define DA8XX_LPSC1_PWM 17 #define DA850_LPSC1_MMC_SD1 18 diff --git a/arch/arm/mach-digicolor/Kconfig b/arch/arm/mach-digicolor/Kconfig index fc65b0f1d..9d05c6c41 100644 --- a/arch/arm/mach-digicolor/Kconfig +++ b/arch/arm/mach-digicolor/Kconfig @@ -1,10 +1,10 @@ config ARCH_DIGICOLOR bool "Conexant Digicolor SoC Support" depends on ARCH_MULTI_V7 - select ARCH_REQUIRE_GPIOLIB select CLKSRC_MMIO select DIGICOLOR_TIMER select GENERIC_IRQ_CHIP + select GPIOLIB select MFD_SYSCON select PINCTRL select PINCTRL_DIGICOLOR diff --git a/arch/arm/mach-ep93xx/ts72xx.c b/arch/arm/mach-ep93xx/ts72xx.c index 45b81a2bc..3b39ea353 100644 --- a/arch/arm/mach-ep93xx/ts72xx.c +++ b/arch/arm/mach-ep93xx/ts72xx.c @@ -16,7 +16,7 @@ #include <linux/init.h> #include <linux/platform_device.h> #include <linux/io.h> -#include <linux/m48t86.h> +#include <linux/platform_data/rtc-m48t86.h> #include <linux/mtd/nand.h> #include <linux/mtd/partitions.h> diff --git a/arch/arm/mach-exynos/Kconfig b/arch/arm/mach-exynos/Kconfig index 20dcf6e90..8f820de89 100644 --- a/arch/arm/mach-exynos/Kconfig +++ b/arch/arm/mach-exynos/Kconfig @@ -12,13 +12,14 @@ menuconfig ARCH_EXYNOS depends on ARCH_MULTI_V7 select ARCH_HAS_BANDGAP select ARCH_HAS_HOLES_MEMORYMODEL - select ARCH_REQUIRE_GPIOLIB select ARM_AMBA select ARM_GIC select COMMON_CLK_SAMSUNG select EXYNOS_THERMAL select EXYNOS_PMU select EXYNOS_SROM + select EXYNOS_PM_DOMAINS if PM_GENERIC_DOMAINS + select GPIOLIB select HAVE_ARM_SCU if SMP select HAVE_S3C2410_I2C if I2C select HAVE_S3C2410_WATCHDOG if WATCHDOG diff --git a/arch/arm/mach-exynos/Makefile b/arch/arm/mach-exynos/Makefile index 34d29df3e..9ea6c5464 100644 --- a/arch/arm/mach-exynos/Makefile +++ b/arch/arm/mach-exynos/Makefile @@ -13,7 +13,6 @@ obj-$(CONFIG_ARCH_EXYNOS) += exynos.o exynos-smc.o firmware.o obj-$(CONFIG_EXYNOS_CPU_SUSPEND) += pm.o sleep.o obj-$(CONFIG_PM_SLEEP) += suspend.o -obj-$(CONFIG_PM_GENERIC_DOMAINS) += pm_domains.o obj-$(CONFIG_SMP) += platsmp.o headsmp.o @@ -23,5 +22,3 @@ AFLAGS_sleep.o :=-Wa,-march=armv7-a$(plus_sec) obj-$(CONFIG_EXYNOS5420_MCPM) += mcpm-exynos.o CFLAGS_mcpm-exynos.o += -march=armv7-a - -obj-$(CONFIG_S5P_DEV_MFC) += s5p-dev-mfc.o diff --git a/arch/arm/mach-exynos/common.h b/arch/arm/mach-exynos/common.h index 5365bf1f5..9424a8a9f 100644 --- a/arch/arm/mach-exynos/common.h +++ b/arch/arm/mach-exynos/common.h @@ -166,7 +166,6 @@ extern struct cpuidle_exynos_data cpuidle_coupled_exynos_data; extern void exynos_set_delayed_reset_assertion(bool enable); -extern void s5p_init_cpu(void __iomem *cpuid_addr); extern unsigned int samsung_rev(void); extern void exynos_core_restart(u32 core_id); extern int exynos_set_boot_addr(u32 core_id, unsigned long boot_addr); @@ -174,12 +173,12 @@ extern int exynos_get_boot_addr(u32 core_id, unsigned long *boot_addr); static inline void pmu_raw_writel(u32 val, u32 offset) { - __raw_writel(val, pmu_base_addr + offset); + writel_relaxed(val, pmu_base_addr + offset); } static inline u32 pmu_raw_readl(u32 offset) { - return __raw_readl(pmu_base_addr + offset); + return readl_relaxed(pmu_base_addr + offset); } #endif /* __ARCH_ARM_MACH_EXYNOS_COMMON_H */ diff --git a/arch/arm/mach-exynos/exynos.c b/arch/arm/mach-exynos/exynos.c index 52ccf247e..acabf0bff 100644 --- a/arch/arm/mach-exynos/exynos.c +++ b/arch/arm/mach-exynos/exynos.c @@ -14,7 +14,6 @@ #include <linux/of.h> #include <linux/of_address.h> #include <linux/of_fdt.h> -#include <linux/of_platform.h> #include <linux/platform_device.h> #include <linux/irqchip.h> #include <linux/soc/samsung/exynos-regs-pmu.h> @@ -25,9 +24,9 @@ #include <asm/mach/map.h> #include <mach/map.h> +#include <plat/cpu.h> #include "common.h" -#include "mfc.h" static struct map_desc exynos4_iodesc[] __initdata = { { @@ -217,8 +216,6 @@ static void __init exynos_dt_machine_init(void) of_machine_is_compatible("samsung,exynos3250") || of_machine_is_compatible("samsung,exynos5250")) platform_device_register(&exynos_cpuidle); - - of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL); } static char const *const exynos_dt_compat[] __initconst = { @@ -237,23 +234,6 @@ static char const *const exynos_dt_compat[] __initconst = { NULL }; -static void __init exynos_reserve(void) -{ -#ifdef CONFIG_S5P_DEV_MFC - int i; - char *mfc_mem[] = { - "samsung,mfc-v5", - "samsung,mfc-v6", - "samsung,mfc-v7", - "samsung,mfc-v8", - }; - - for (i = 0; i < ARRAY_SIZE(mfc_mem); i++) - if (of_scan_flat_dt(s5p_fdt_alloc_mfc_mem, mfc_mem[i])) - break; -#endif -} - static void __init exynos_dt_fixup(void) { /* @@ -275,6 +255,5 @@ DT_MACHINE_START(EXYNOS_DT, "SAMSUNG EXYNOS (Flattened Device Tree)") .init_machine = exynos_dt_machine_init, .init_late = exynos_init_late, .dt_compat = exynos_dt_compat, - .reserve = exynos_reserve, .dt_fixup = exynos_dt_fixup, MACHINE_END diff --git a/arch/arm/mach-exynos/firmware.c b/arch/arm/mach-exynos/firmware.c index 1bfd1b0bd..fd6da5419 100644 --- a/arch/arm/mach-exynos/firmware.c +++ b/arch/arm/mach-exynos/firmware.c @@ -41,9 +41,9 @@ static int exynos_do_idle(unsigned long mode) case FW_DO_IDLE_AFTR: if (read_cpuid_part() == ARM_CPU_PART_CORTEX_A9) exynos_save_cp15(); - __raw_writel(virt_to_phys(exynos_cpu_resume_ns), - sysram_ns_base_addr + 0x24); - __raw_writel(EXYNOS_AFTR_MAGIC, sysram_ns_base_addr + 0x20); + writel_relaxed(virt_to_phys(exynos_cpu_resume_ns), + sysram_ns_base_addr + 0x24); + writel_relaxed(EXYNOS_AFTR_MAGIC, sysram_ns_base_addr + 0x20); if (soc_is_exynos3250()) { flush_cache_all(); exynos_smc(SMC_CMD_SAVE, OP_TYPE_CORE, @@ -97,7 +97,7 @@ static int exynos_set_cpu_boot_addr(int cpu, unsigned long boot_addr) if (soc_is_exynos4412()) boot_reg += 4 * cpu; - __raw_writel(boot_addr, boot_reg); + writel_relaxed(boot_addr, boot_reg); return 0; } @@ -113,7 +113,7 @@ static int exynos_get_cpu_boot_addr(int cpu, unsigned long *boot_addr) if (soc_is_exynos4412()) boot_reg += 4 * cpu; - *boot_addr = __raw_readl(boot_reg); + *boot_addr = readl_relaxed(boot_reg); return 0; } @@ -234,20 +234,20 @@ void exynos_set_boot_flag(unsigned int cpu, unsigned int mode) { unsigned int tmp; - tmp = __raw_readl(REG_CPU_STATE_ADDR + cpu * 4); + tmp = readl_relaxed(REG_CPU_STATE_ADDR + cpu * 4); if (mode & BOOT_MODE_MASK) tmp &= ~BOOT_MODE_MASK; tmp |= mode; - __raw_writel(tmp, REG_CPU_STATE_ADDR + cpu * 4); + writel_relaxed(tmp, REG_CPU_STATE_ADDR + cpu * 4); } void exynos_clear_boot_flag(unsigned int cpu, unsigned int mode) { unsigned int tmp; - tmp = __raw_readl(REG_CPU_STATE_ADDR + cpu * 4); + tmp = readl_relaxed(REG_CPU_STATE_ADDR + cpu * 4); tmp &= ~mode; - __raw_writel(tmp, REG_CPU_STATE_ADDR + cpu * 4); + writel_relaxed(tmp, REG_CPU_STATE_ADDR + cpu * 4); } diff --git a/arch/arm/mach-exynos/headsmp.S b/arch/arm/mach-exynos/headsmp.S index b54f9701e..d3d24ab35 100644 --- a/arch/arm/mach-exynos/headsmp.S +++ b/arch/arm/mach-exynos/headsmp.S @@ -12,12 +12,15 @@ #include <linux/linkage.h> #include <linux/init.h> +#include <asm/assembler.h> + /* * exynos4 specific entry point for secondary CPUs. This provides * a "holding pen" into which all secondary cores are held until we're * ready for them to initialise. */ ENTRY(exynos4_secondary_startup) +ARM_BE8(setend be) mrc p15, 0, r0, c0, c0, 5 and r0, r0, #15 adr r4, 1f diff --git a/arch/arm/mach-exynos/platsmp.c b/arch/arm/mach-exynos/platsmp.c index 85c3be63d..98ffe1e62 100644 --- a/arch/arm/mach-exynos/platsmp.c +++ b/arch/arm/mach-exynos/platsmp.c @@ -264,7 +264,7 @@ int exynos_set_boot_addr(u32 core_id, unsigned long boot_addr) ret = PTR_ERR(boot_reg); goto fail; } - __raw_writel(boot_addr, boot_reg); + writel_relaxed(boot_addr, boot_reg); ret = 0; } fail: @@ -289,7 +289,7 @@ int exynos_get_boot_addr(u32 core_id, unsigned long *boot_addr) ret = PTR_ERR(boot_reg); goto fail; } - *boot_addr = __raw_readl(boot_reg); + *boot_addr = readl_relaxed(boot_reg); ret = 0; } fail: diff --git a/arch/arm/mach-exynos/pm.c b/arch/arm/mach-exynos/pm.c index c43b776a5..487295f4a 100644 --- a/arch/arm/mach-exynos/pm.c +++ b/arch/arm/mach-exynos/pm.c @@ -132,9 +132,9 @@ static void exynos_set_wakeupmask(long mask) static void exynos_cpu_set_boot_vector(long flags) { - __raw_writel(virt_to_phys(exynos_cpu_resume), - exynos_boot_vector_addr()); - __raw_writel(flags, exynos_boot_vector_flag()); + writel_relaxed(virt_to_phys(exynos_cpu_resume), + exynos_boot_vector_addr()); + writel_relaxed(flags, exynos_boot_vector_flag()); } static int exynos_aftr_finisher(unsigned long flags) diff --git a/arch/arm/mach-exynos/suspend.c b/arch/arm/mach-exynos/suspend.c index f21690937..06332f626 100644 --- a/arch/arm/mach-exynos/suspend.c +++ b/arch/arm/mach-exynos/suspend.c @@ -255,6 +255,12 @@ static int __init exynos_pmu_irq_init(struct device_node *node, return -ENOMEM; } + /* + * Clear the OF_POPULATED flag set in of_irq_init so that + * later the Exynos PMU platform device won't be skipped. + */ + of_node_clear_flag(node, OF_POPULATED); + return 0; } @@ -301,7 +307,7 @@ static int exynos5420_cpu_suspend(unsigned long arg) unsigned int cluster = MPIDR_AFFINITY_LEVEL(mpidr, 1); unsigned int cpu = MPIDR_AFFINITY_LEVEL(mpidr, 0); - __raw_writel(0x0, sysram_base_addr + EXYNOS5420_CPU_STATE); + writel_relaxed(0x0, sysram_base_addr + EXYNOS5420_CPU_STATE); if (IS_ENABLED(CONFIG_EXYNOS5420_MCPM)) { mcpm_set_entry_vector(cpu, cluster, exynos_cpu_resume); @@ -373,8 +379,8 @@ static void exynos5420_pm_prepare(void) * needs to restore it back in case, the primary cpu fails to * suspend for any reason. */ - exynos5420_cpu_state = __raw_readl(sysram_base_addr + - EXYNOS5420_CPU_STATE); + exynos5420_cpu_state = readl_relaxed(sysram_base_addr + + EXYNOS5420_CPU_STATE); exynos_pm_enter_sleep_mode(); @@ -504,11 +510,11 @@ static void exynos5420_pm_resume(void) /* Restore the CPU0 low power state register */ tmp = pmu_raw_readl(EXYNOS5_ARM_CORE0_SYS_PWR_REG); pmu_raw_writel(tmp | S5P_CORE_LOCAL_PWR_EN, - EXYNOS5_ARM_CORE0_SYS_PWR_REG); + EXYNOS5_ARM_CORE0_SYS_PWR_REG); /* Restore the sysram cpu state register */ - __raw_writel(exynos5420_cpu_state, - sysram_base_addr + EXYNOS5420_CPU_STATE); + writel_relaxed(exynos5420_cpu_state, + sysram_base_addr + EXYNOS5420_CPU_STATE); pmu_raw_writel(EXYNOS5420_USE_STANDBY_WFI_ALL, S5P_CENTRAL_SEQ_OPTION); diff --git a/arch/arm/mach-highbank/highbank.c b/arch/arm/mach-highbank/highbank.c index 6050a14fa..07f60986d 100644 --- a/arch/arm/mach-highbank/highbank.c +++ b/arch/arm/mach-highbank/highbank.c @@ -23,7 +23,6 @@ #include <linux/pl320-ipc.h> #include <linux/of.h> #include <linux/of_irq.h> -#include <linux/of_platform.h> #include <linux/of_address.h> #include <linux/reboot.h> #include <linux/amba/bus.h> @@ -163,8 +162,6 @@ static void __init highbank_init(void) pl320_ipc_register_notifier(&hb_keys_nb); - of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL); - if (psci_ops.cpu_suspend) platform_device_register(&highbank_cpuidle_device); } diff --git a/arch/arm/mach-hisi/hisilicon.c b/arch/arm/mach-hisi/hisilicon.c index 8cc621501..c08c44ec5 100644 --- a/arch/arm/mach-hisi/hisilicon.c +++ b/arch/arm/mach-hisi/hisilicon.c @@ -53,31 +53,3 @@ DT_MACHINE_START(HI3620, "Hisilicon Hi3620 (Flattened Device Tree)") .map_io = hi3620_map_io, .dt_compat = hi3xxx_compat, MACHINE_END - -static const char *const hix5hd2_compat[] __initconst = { - "hisilicon,hix5hd2", - NULL, -}; - -DT_MACHINE_START(HIX5HD2_DT, "Hisilicon HIX5HD2 (Flattened Device Tree)") - .dt_compat = hix5hd2_compat, -MACHINE_END - -static const char *const hip04_compat[] __initconst = { - "hisilicon,hip04-d01", - NULL, -}; - -DT_MACHINE_START(HIP04, "Hisilicon HiP04 (Flattened Device Tree)") - .dt_compat = hip04_compat, -MACHINE_END - -static const char *const hip01_compat[] __initconst = { - "hisilicon,hip01", - "hisilicon,hip01-ca9x2", - NULL, -}; - -DT_MACHINE_START(HIP01, "Hisilicon HIP01 (Flattened Device Tree)") - .dt_compat = hip01_compat, -MACHINE_END diff --git a/arch/arm/mach-hisi/platsmp.c b/arch/arm/mach-hisi/platsmp.c index 47ed32cf5..e1d67648d 100644 --- a/arch/arm/mach-hisi/platsmp.c +++ b/arch/arm/mach-hisi/platsmp.c @@ -103,7 +103,7 @@ static void __init hisi_common_smp_prepare_cpus(unsigned int max_cpus) hisi_enable_scu_a9(); } -void hix5hd2_set_scu_boot_addr(phys_addr_t start_addr, phys_addr_t jump_addr) +static void hix5hd2_set_scu_boot_addr(phys_addr_t start_addr, phys_addr_t jump_addr) { void __iomem *virt; @@ -139,7 +139,7 @@ static const struct smp_operations hix5hd2_smp_ops __initconst = { #define HIP01_BOOT_ADDRESS 0x80000000 #define REG_SC_CTRL 0x000 -void hip01_set_boot_addr(phys_addr_t start_addr, phys_addr_t jump_addr) +static void hip01_set_boot_addr(phys_addr_t start_addr, phys_addr_t jump_addr) { void __iomem *virt; diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig index dd905b960..ee9a318ca 100644 --- a/arch/arm/mach-imx/Kconfig +++ b/arch/arm/mach-imx/Kconfig @@ -1,10 +1,10 @@ menuconfig ARCH_MXC bool "Freescale i.MX family" depends on ARCH_MULTI_V4_V5 || ARCH_MULTI_V6_V7 || ARM_SINGLE_ARMV7M - select ARCH_REQUIRE_GPIOLIB select ARCH_SUPPORTS_BIG_ENDIAN select CLKSRC_IMX_GPT select GENERIC_IRQ_CHIP + select GPIOLIB select PINCTRL select PM_OPP if PM select SOC_BUS @@ -44,9 +44,6 @@ config MXC_USE_EPIT uses the same clocks as the GPT. Anyway, on some systems the GPT may be in use for other purposes. -config ARCH_HAS_RNGA - bool - config HAVE_IMX_ANATOP bool @@ -90,7 +87,6 @@ config SOC_IMX27 config SOC_IMX31 bool select CPU_V6 - select IMX_HAVE_PLATFORM_MXC_RNGA select MXC_AVIC select SMP_ON_UP if SMP diff --git a/arch/arm/mach-imx/Makefile b/arch/arm/mach-imx/Makefile index 9fbe624a5..9f5fffd62 100644 --- a/arch/arm/mach-imx/Makefile +++ b/arch/arm/mach-imx/Makefile @@ -8,8 +8,8 @@ obj-$(CONFIG_SOC_IMX25) += cpu-imx25.o mach-imx25.o pm-imx25.o obj-$(CONFIG_SOC_IMX27) += cpu-imx27.o pm-imx27.o obj-$(CONFIG_SOC_IMX27) += mm-imx27.o ehci-imx27.o -obj-$(CONFIG_SOC_IMX31) += mm-imx3.o cpu-imx31.o iomux-imx31.o ehci-imx31.o pm-imx3.o -obj-$(CONFIG_SOC_IMX35) += mm-imx3.o cpu-imx35.o ehci-imx35.o pm-imx3.o +obj-$(CONFIG_SOC_IMX31) += mm-imx3.o cpu-imx31.o iomux-imx31.o ehci-imx31.o +obj-$(CONFIG_SOC_IMX35) += mm-imx3.o cpu-imx35.o ehci-imx35.o imx5-pm-$(CONFIG_PM) += pm-imx5.o obj-$(CONFIG_SOC_IMX5) += cpu-imx5.o $(imx5-pm-y) diff --git a/arch/arm/mach-imx/avic.c b/arch/arm/mach-imx/avic.c index 7fa176e79..1afccae04 100644 --- a/arch/arm/mach-imx/avic.c +++ b/arch/arm/mach-imx/avic.c @@ -55,23 +55,20 @@ static void __iomem *avic_base; static struct irq_domain *domain; #ifdef CONFIG_FIQ -static int avic_set_irq_fiq(unsigned int irq, unsigned int type) +static int avic_set_irq_fiq(unsigned int hwirq, unsigned int type) { - struct irq_data *d = irq_get_irq_data(irq); unsigned int irqt; - irq = d->hwirq; - - if (irq >= AVIC_NUM_IRQS) + if (hwirq >= AVIC_NUM_IRQS) return -EINVAL; - if (irq < AVIC_NUM_IRQS / 2) { - irqt = imx_readl(avic_base + AVIC_INTTYPEL) & ~(1 << irq); - imx_writel(irqt | (!!type << irq), avic_base + AVIC_INTTYPEL); + if (hwirq < AVIC_NUM_IRQS / 2) { + irqt = imx_readl(avic_base + AVIC_INTTYPEL) & ~(1 << hwirq); + imx_writel(irqt | (!!type << hwirq), avic_base + AVIC_INTTYPEL); } else { - irq -= AVIC_NUM_IRQS / 2; - irqt = imx_readl(avic_base + AVIC_INTTYPEH) & ~(1 << irq); - imx_writel(irqt | (!!type << irq), avic_base + AVIC_INTTYPEH); + hwirq -= AVIC_NUM_IRQS / 2; + irqt = imx_readl(avic_base + AVIC_INTTYPEH) & ~(1 << hwirq); + imx_writel(irqt | (!!type << hwirq), avic_base + AVIC_INTTYPEH); } return 0; diff --git a/arch/arm/mach-imx/common.h b/arch/arm/mach-imx/common.h index 58a384644..a8f469333 100644 --- a/arch/arm/mach-imx/common.h +++ b/arch/arm/mach-imx/common.h @@ -32,7 +32,6 @@ void imx27_init_early(void); void imx31_init_early(void); void imx35_init_early(void); void mxc_init_irq(void __iomem *); -void tzic_init_irq(void); void mx1_init_irq(void); void mx21_init_irq(void); void mx27_init_irq(void); @@ -55,6 +54,7 @@ struct platform_device *mxc_register_gpio(char *name, int id, void mxc_set_cpu_type(unsigned int type); void mxc_restart(enum reboot_mode, const char *); void mxc_arch_reset_init(void __iomem *); +void imx1_reset_init(void __iomem *); void imx_set_aips(void __iomem *); void imx_aips_allow_unprivileged_access(const char *compat); int mxc_device_init(void); @@ -67,6 +67,7 @@ void imx_gpc_set_arm_power_in_lpm(bool power_off); void imx_gpc_set_arm_power_up_timing(u32 sw2iso, u32 sw); void imx_gpc_set_arm_power_down_timing(u32 sw2iso, u32 sw); void imx25_pm_init(void); +void imx27_pm_init(void); enum mxc_cpu_pwr_mode { WAIT_CLOCKED, /* wfi only */ diff --git a/arch/arm/mach-imx/cpu-imx5.c b/arch/arm/mach-imx/cpu-imx5.c index 3403bac94..4f2d1c772 100644 --- a/arch/arm/mach-imx/cpu-imx5.c +++ b/arch/arm/mach-imx/cpu-imx5.c @@ -60,13 +60,9 @@ static int get_mx51_srev(void) /* * Returns: * the silicon revision of the cpu - * -EINVAL - not a mx51 */ int mx51_revision(void) { - if (!cpu_is_mx51()) - return -EINVAL; - if (mx5_cpu_rev == -1) mx5_cpu_rev = get_mx51_srev(); @@ -112,13 +108,9 @@ static int get_mx53_srev(void) /* * Returns: * the silicon revision of the cpu - * -EINVAL - not a mx53 */ int mx53_revision(void) { - if (!cpu_is_mx53()) - return -EINVAL; - if (mx5_cpu_rev == -1) mx5_cpu_rev = get_mx53_srev(); diff --git a/arch/arm/mach-imx/cpu.c b/arch/arm/mach-imx/cpu.c index 6a96b7cf4..b3347d323 100644 --- a/arch/arm/mach-imx/cpu.c +++ b/arch/arm/mach-imx/cpu.c @@ -10,8 +10,6 @@ #include "common.h" unsigned int __mxc_cpu_type; -EXPORT_SYMBOL(__mxc_cpu_type); - static unsigned int imx_soc_revision; void mxc_set_cpu_type(unsigned int type) diff --git a/arch/arm/mach-imx/cpuidle-imx6q.c b/arch/arm/mach-imx/cpuidle-imx6q.c index 353bb8774..db0f48c4b 100644 --- a/arch/arm/mach-imx/cpuidle-imx6q.c +++ b/arch/arm/mach-imx/cpuidle-imx6q.c @@ -10,6 +10,8 @@ #include <linux/module.h> #include <asm/cpuidle.h> +#include <soc/imx/cpuidle.h> + #include "common.h" #include "cpuidle.h" #include "hardware.h" @@ -62,6 +64,24 @@ static struct cpuidle_driver imx6q_cpuidle_driver = { .safe_state_index = 0, }; +/* + * i.MX6 Q/DL has an erratum (ERR006687) that prevents the FEC from waking the + * CPUs when they are in wait(unclocked) state. As the hardware workaround isn't + * applicable to all boards, disable the deeper idle state when the workaround + * isn't present and the FEC is in use. + */ +void imx6q_cpuidle_fec_irqs_used(void) +{ + imx6q_cpuidle_driver.states[1].disabled = true; +} +EXPORT_SYMBOL_GPL(imx6q_cpuidle_fec_irqs_used); + +void imx6q_cpuidle_fec_irqs_unused(void) +{ + imx6q_cpuidle_driver.states[1].disabled = false; +} +EXPORT_SYMBOL_GPL(imx6q_cpuidle_fec_irqs_unused); + int __init imx6q_cpuidle_init(void) { /* Set INT_MEM_CLK_LPM bit to get a reliable WAIT mode support */ diff --git a/arch/arm/mach-imx/devices/Kconfig b/arch/arm/mach-imx/devices/Kconfig index 3a5529892..6ffe57267 100644 --- a/arch/arm/mach-imx/devices/Kconfig +++ b/arch/arm/mach-imx/devices/Kconfig @@ -57,10 +57,6 @@ config IMX_HAVE_PLATFORM_MXC_MMC config IMX_HAVE_PLATFORM_MXC_NAND bool -config IMX_HAVE_PLATFORM_MXC_RNGA - bool - select ARCH_HAS_RNGA - config IMX_HAVE_PLATFORM_MXC_RTC bool diff --git a/arch/arm/mach-imx/devices/devices.c b/arch/arm/mach-imx/devices/devices.c index 8eab5440d..300451727 100644 --- a/arch/arm/mach-imx/devices/devices.c +++ b/arch/arm/mach-imx/devices/devices.c @@ -22,6 +22,9 @@ #include <linux/err.h> #include <linux/platform_device.h> +#include "../common.h" +#include "devices-common.h" + struct device mxc_aips_bus = { .init_name = "mxc_aips", }; diff --git a/arch/arm/mach-imx/devices/platform-gpio-mxc.c b/arch/arm/mach-imx/devices/platform-gpio-mxc.c index 26483fa94..cd1fe69d8 100644 --- a/arch/arm/mach-imx/devices/platform-gpio-mxc.c +++ b/arch/arm/mach-imx/devices/platform-gpio-mxc.c @@ -7,6 +7,7 @@ * Free Software Foundation. */ #include "devices-common.h" +#include "../common.h" struct platform_device *__init mxc_register_gpio(char *name, int id, resource_size_t iobase, resource_size_t iosize, int irq, int irq_high) diff --git a/arch/arm/mach-imx/gpc.c b/arch/arm/mach-imx/gpc.c index fd8720532..0df062d8b 100644 --- a/arch/arm/mach-imx/gpc.c +++ b/arch/arm/mach-imx/gpc.c @@ -271,6 +271,12 @@ static int __init imx_gpc_init(struct device_node *node, for (i = 0; i < IMR_NUM; i++) writel_relaxed(~0, gpc_base + GPC_IMR1 + i * 4); + /* + * Clear the OF_POPULATED flag set in of_irq_init so that + * later the GPC power domain driver will not be skipped. + */ + of_node_clear_flag(node, OF_POPULATED); + return 0; } IRQCHIP_DECLARE(imx_gpc, "fsl,imx6q-gpc", imx_gpc_init); diff --git a/arch/arm/mach-imx/imx27-dt.c b/arch/arm/mach-imx/imx27-dt.c index 530a728c2..a754b8a48 100644 --- a/arch/arm/mach-imx/imx27-dt.c +++ b/arch/arm/mach-imx/imx27-dt.c @@ -27,5 +27,6 @@ DT_MACHINE_START(IMX27_DT, "Freescale i.MX27 (Device Tree Support)") .map_io = mx27_map_io, .init_early = imx27_init_early, .init_irq = mx27_init_irq, + .init_late = imx27_pm_init, .dt_compat = imx27_dt_board_compat, MACHINE_END diff --git a/arch/arm/mach-imx/imx31-dt.c b/arch/arm/mach-imx/imx31-dt.c index 32100222a..62e6b4fb5 100644 --- a/arch/arm/mach-imx/imx31-dt.c +++ b/arch/arm/mach-imx/imx31-dt.c @@ -28,10 +28,22 @@ static void __init imx31_dt_timer_init(void) mx31_clocks_init_dt(); } +/* FIXME: replace with DT binding */ +static const struct resource imx31_rnga_res[] __initconst = { + DEFINE_RES_MEM(MX31_RNGA_BASE_ADDR, SZ_16K), +}; + +static void __init imx31_dt_mach_init(void) +{ + platform_device_register_simple("mxc_rnga", -1, imx31_rnga_res, + ARRAY_SIZE(imx31_rnga_res)); +} + DT_MACHINE_START(IMX31_DT, "Freescale i.MX31 (Device Tree Support)") .map_io = mx31_map_io, .init_early = imx31_init_early, .init_irq = mx31_init_irq, .init_time = imx31_dt_timer_init, + .init_machine = imx31_dt_mach_init, .dt_compat = imx31_dt_board_compat, MACHINE_END diff --git a/arch/arm/mach-imx/imx35-dt.c b/arch/arm/mach-imx/imx35-dt.c index e93960372..99bb63ded 100644 --- a/arch/arm/mach-imx/imx35-dt.c +++ b/arch/arm/mach-imx/imx35-dt.c @@ -20,20 +20,16 @@ #include "common.h" #include "mx35.h" -static void __init imx35_irq_init(void) -{ - imx_init_l2cache(); - mx35_init_irq(); -} - static const char * const imx35_dt_board_compat[] __initconst = { "fsl,imx35", NULL }; DT_MACHINE_START(IMX35_DT, "Freescale i.MX35 (Device Tree Support)") + .l2c_aux_val = 0, + .l2c_aux_mask = ~0, .map_io = mx35_map_io, .init_early = imx35_init_early, - .init_irq = imx35_irq_init, + .init_irq = mx35_init_irq, .dt_compat = imx35_dt_board_compat, MACHINE_END diff --git a/arch/arm/mach-imx/irq-common.c b/arch/arm/mach-imx/irq-common.c index 0a920d184..210d36eba 100644 --- a/arch/arm/mach-imx/irq-common.c +++ b/arch/arm/mach-imx/irq-common.c @@ -33,8 +33,10 @@ int mxc_set_irq_fiq(unsigned int irq, unsigned int type) gc = irq_get_chip_data(irq); if (gc && gc->private) { exirq = gc->private; - if (exirq->set_irq_fiq) - ret = exirq->set_irq_fiq(irq, type); + if (exirq->set_irq_fiq) { + struct irq_data *d = irq_get_irq_data(irq); + ret = exirq->set_irq_fiq(irqd_to_hwirq(d), type); + } } return ret; diff --git a/arch/arm/mach-imx/mach-imx50.c b/arch/arm/mach-imx/mach-imx50.c index ecf58b9e9..4cab5f612 100644 --- a/arch/arm/mach-imx/mach-imx50.c +++ b/arch/arm/mach-imx/mach-imx50.c @@ -22,6 +22,5 @@ static const char * const imx50_dt_board_compat[] __initconst = { }; DT_MACHINE_START(IMX50_DT, "Freescale i.MX50 (Device Tree Support)") - .init_irq = tzic_init_irq, .dt_compat = imx50_dt_board_compat, MACHINE_END diff --git a/arch/arm/mach-imx/mach-imx51.c b/arch/arm/mach-imx/mach-imx51.c index 10a82a4f1..3835b6a34 100644 --- a/arch/arm/mach-imx/mach-imx51.c +++ b/arch/arm/mach-imx/mach-imx51.c @@ -53,7 +53,7 @@ static void __init imx51_dt_init(void) imx51_ipu_mipi_setup(); imx_src_init(); - of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL); + imx_aips_allow_unprivileged_access("fsl,imx51-aipstz"); } static void __init imx51_init_late(void) @@ -69,7 +69,6 @@ static const char * const imx51_dt_board_compat[] __initconst = { DT_MACHINE_START(IMX51_DT, "Freescale i.MX51 (Device Tree Support)") .init_early = imx51_init_early, - .init_irq = tzic_init_irq, .init_machine = imx51_dt_init, .init_late = imx51_init_late, .dt_compat = imx51_dt_board_compat, diff --git a/arch/arm/mach-imx/mach-imx53.c b/arch/arm/mach-imx/mach-imx53.c index 18b5c5c13..07c2e8dca 100644 --- a/arch/arm/mach-imx/mach-imx53.c +++ b/arch/arm/mach-imx/mach-imx53.c @@ -32,8 +32,6 @@ static void __init imx53_dt_init(void) { imx_src_init(); - of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL); - imx_aips_allow_unprivileged_access("fsl,imx53-aipstz"); } @@ -49,7 +47,6 @@ static const char * const imx53_dt_board_compat[] __initconst = { DT_MACHINE_START(IMX53_DT, "Freescale i.MX53 (Device Tree Support)") .init_early = imx53_init_early, - .init_irq = tzic_init_irq, .init_machine = imx53_dt_init, .init_late = imx53_init_late, .dt_compat = imx53_dt_board_compat, diff --git a/arch/arm/mach-imx/mach-imx6q.c b/arch/arm/mach-imx/mach-imx6q.c index cb27d566d..97fd25105 100644 --- a/arch/arm/mach-imx/mach-imx6q.c +++ b/arch/arm/mach-imx/mach-imx6q.c @@ -220,7 +220,7 @@ static void __init imx6q_1588_init(void) IMX6Q_GPR1_ENET_CLK_SEL_MASK, clksel); else - pr_err("failed to find fsl,imx6q-iomux-gpr regmap\n"); + pr_err("failed to find fsl,imx6q-iomuxc-gpr regmap\n"); clk_put(enet_ref); put_ptp_clk: @@ -278,7 +278,7 @@ static void __init imx6q_init_machine(void) imx6q_enet_phy_init(); - of_platform_populate(NULL, of_default_bus_match_table, NULL, parent); + of_platform_default_populate(NULL, NULL, parent); imx_anatop_init(); cpu_is_imx6q() ? imx6q_pm_init() : imx6dl_pm_init(); @@ -407,6 +407,8 @@ static const char * const imx6q_dt_compat[] __initconst = { }; DT_MACHINE_START(IMX6Q, "Freescale i.MX6 Quad/DualLite (Device Tree)") + .l2c_aux_val = 0, + .l2c_aux_mask = ~0, .smp = smp_ops(imx_smp_ops), .map_io = imx6q_map_io, .init_irq = imx6q_init_irq, diff --git a/arch/arm/mach-imx/mach-imx6sl.c b/arch/arm/mach-imx/mach-imx6sl.c index 300326373..04084900d 100644 --- a/arch/arm/mach-imx/mach-imx6sl.c +++ b/arch/arm/mach-imx/mach-imx6sl.c @@ -52,7 +52,7 @@ static void __init imx6sl_init_machine(void) if (parent == NULL) pr_warn("failed to initialize soc device\n"); - of_platform_populate(NULL, of_default_bus_match_table, NULL, parent); + of_platform_default_populate(NULL, NULL, parent); imx6sl_fec_init(); imx_anatop_init(); @@ -75,6 +75,8 @@ static const char * const imx6sl_dt_compat[] __initconst = { }; DT_MACHINE_START(IMX6SL, "Freescale i.MX6 SoloLite (Device Tree)") + .l2c_aux_val = 0, + .l2c_aux_mask = ~0, .init_irq = imx6sl_init_irq, .init_machine = imx6sl_init_machine, .init_late = imx6sl_init_late, diff --git a/arch/arm/mach-imx/mach-imx6sx.c b/arch/arm/mach-imx/mach-imx6sx.c index 6a0b0614d..7f52d9b1e 100644 --- a/arch/arm/mach-imx/mach-imx6sx.c +++ b/arch/arm/mach-imx/mach-imx6sx.c @@ -72,7 +72,7 @@ static void __init imx6sx_init_machine(void) if (parent == NULL) pr_warn("failed to initialize soc device\n"); - of_platform_populate(NULL, of_default_bus_match_table, NULL, parent); + of_platform_default_populate(NULL, NULL, parent); imx6sx_enet_init(); imx_anatop_init(); @@ -103,6 +103,8 @@ static const char * const imx6sx_dt_compat[] __initconst = { }; DT_MACHINE_START(IMX6SX, "Freescale i.MX6 SoloX (Device Tree)") + .l2c_aux_val = 0, + .l2c_aux_mask = ~0, .init_irq = imx6sx_init_irq, .init_machine = imx6sx_init_machine, .dt_compat = imx6sx_dt_compat, diff --git a/arch/arm/mach-imx/mach-imx6ul.c b/arch/arm/mach-imx/mach-imx6ul.c index b56de4b8c..6bb7d9cf1 100644 --- a/arch/arm/mach-imx/mach-imx6ul.c +++ b/arch/arm/mach-imx/mach-imx6ul.c @@ -64,7 +64,7 @@ static void __init imx6ul_init_machine(void) if (parent == NULL) pr_warn("failed to initialize soc device\n"); - of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL); + of_platform_default_populate(NULL, NULL, parent); imx6ul_enet_init(); imx_anatop_init(); imx6ul_pm_init(); diff --git a/arch/arm/mach-imx/mach-imx7d.c b/arch/arm/mach-imx/mach-imx7d.c index b450f525a..26ca744d3 100644 --- a/arch/arm/mach-imx/mach-imx7d.c +++ b/arch/arm/mach-imx/mach-imx7d.c @@ -93,7 +93,6 @@ static void __init imx7d_init_machine(void) if (parent == NULL) pr_warn("failed to initialize soc device\n"); - of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL); imx_anatop_init(); imx7d_enet_init(); } @@ -107,6 +106,7 @@ static void __init imx7d_init_irq(void) static const char *const imx7d_dt_compat[] __initconst = { "fsl,imx7d", + "fsl,imx7s", NULL, }; diff --git a/arch/arm/mach-imx/mm-imx1.c b/arch/arm/mach-imx/mm-imx1.c index e065fedb3..9a42f19be 100644 --- a/arch/arm/mach-imx/mm-imx1.c +++ b/arch/arm/mach-imx/mm-imx1.c @@ -50,7 +50,7 @@ void __init mx1_init_irq(void) void __init imx1_soc_init(void) { - mxc_arch_reset_init(MX1_IO_ADDRESS(MX1_WDT_BASE_ADDR)); + imx1_reset_init(MX1_IO_ADDRESS(MX1_WDT_BASE_ADDR)); mxc_device_init(); mxc_register_gpio("imx1-gpio", 0, MX1_GPIO1_BASE_ADDR, SZ_256, diff --git a/arch/arm/mach-imx/mm-imx27.c b/arch/arm/mach-imx/mm-imx27.c index 7d82a5a5b..862b9b776 100644 --- a/arch/arm/mach-imx/mm-imx27.c +++ b/arch/arm/mach-imx/mm-imx27.c @@ -98,4 +98,6 @@ void __init imx27_soc_init(void) /* imx27 has the imx21 type audmux */ platform_device_register_simple("imx21-audmux", 0, imx27_audmux_res, ARRAY_SIZE(imx27_audmux_res)); + + imx27_pm_init(); } diff --git a/arch/arm/mach-imx/mm-imx3.c b/arch/arm/mach-imx/mm-imx3.c index 0256e17d2..500d13df6 100644 --- a/arch/arm/mach-imx/mm-imx3.c +++ b/arch/arm/mach-imx/mm-imx3.c @@ -19,6 +19,7 @@ #include <linux/mm.h> #include <linux/init.h> #include <linux/err.h> +#include <linux/io.h> #include <linux/pinctrl/machine.h> #include <asm/pgtable.h> @@ -38,8 +39,6 @@ static void imx3_idle(void) { unsigned long reg = 0; - mx3_cpu_lp_set(MX3_WAIT); - __asm__ __volatile__( /* disable I and D cache */ "mrc p15, 0, %0, c1, c0, 0\n" @@ -135,11 +134,20 @@ void __init mx31_map_io(void) iotable_init(mx31_io_desc, ARRAY_SIZE(mx31_io_desc)); } +static void imx31_idle(void) +{ + int reg = imx_readl(mx3_ccm_base + MXC_CCM_CCMR); + reg &= ~MXC_CCM_CCMR_LPM_MASK; + imx_writel(reg, mx3_ccm_base + MXC_CCM_CCMR); + + imx3_idle(); +} + void __init imx31_init_early(void) { mxc_set_cpu_type(MXC_CPU_MX31); arch_ioremap_caller = imx3_ioremap_caller; - arm_pm_idle = imx3_idle; + arm_pm_idle = imx31_idle; mx3_ccm_base = MX31_IO_ADDRESS(MX31_CCM_BASE_ADDR); } @@ -167,6 +175,10 @@ static const struct resource imx31_audmux_res[] __initconst = { DEFINE_RES_MEM(MX31_AUDMUX_BASE_ADDR, SZ_16K), }; +static const struct resource imx31_rnga_res[] __initconst = { + DEFINE_RES_MEM(MX31_RNGA_BASE_ADDR, SZ_16K), +}; + void __init imx31_soc_init(void) { int to_version = mx31_revision() >> 4; @@ -195,6 +207,8 @@ void __init imx31_soc_init(void) platform_device_register_simple("imx31-audmux", 0, imx31_audmux_res, ARRAY_SIZE(imx31_audmux_res)); + platform_device_register_simple("mxc_rnga", -1, imx31_rnga_res, + ARRAY_SIZE(imx31_rnga_res)); } #endif /* ifdef CONFIG_SOC_IMX31 */ @@ -212,11 +226,21 @@ void __init mx35_map_io(void) iotable_init(mx35_io_desc, ARRAY_SIZE(mx35_io_desc)); } +static void imx35_idle(void) +{ + int reg = imx_readl(mx3_ccm_base + MXC_CCM_CCMR); + reg &= ~MXC_CCM_CCMR_LPM_MASK; + reg |= MXC_CCM_CCMR_LPM_WAIT_MX35; + imx_writel(reg, mx3_ccm_base + MXC_CCM_CCMR); + + imx3_idle(); +} + void __init imx35_init_early(void) { mxc_set_cpu_type(MXC_CPU_MX35); mxc_iomux_v3_init(MX35_IO_ADDRESS(MX35_IOMUXC_BASE_ADDR)); - arm_pm_idle = imx3_idle; + arm_pm_idle = imx35_idle; arch_ioremap_caller = imx3_ioremap_caller; mx3_ccm_base = MX35_IO_ADDRESS(MX35_CCM_BASE_ADDR); } diff --git a/arch/arm/mach-imx/mxc.h b/arch/arm/mach-imx/mxc.h index d32704256..34f2ff625 100644 --- a/arch/arm/mach-imx/mxc.h +++ b/arch/arm/mach-imx/mxc.h @@ -45,105 +45,7 @@ #ifndef __ASSEMBLY__ extern unsigned int __mxc_cpu_type; -#endif - -#ifdef CONFIG_SOC_IMX1 -# ifdef mxc_cpu_type -# undef mxc_cpu_type -# define mxc_cpu_type __mxc_cpu_type -# else -# define mxc_cpu_type MXC_CPU_MX1 -# endif -# define cpu_is_mx1() (mxc_cpu_type == MXC_CPU_MX1) -#else -# define cpu_is_mx1() (0) -#endif - -#ifdef CONFIG_SOC_IMX21 -# ifdef mxc_cpu_type -# undef mxc_cpu_type -# define mxc_cpu_type __mxc_cpu_type -# else -# define mxc_cpu_type MXC_CPU_MX21 -# endif -# define cpu_is_mx21() (mxc_cpu_type == MXC_CPU_MX21) -#else -# define cpu_is_mx21() (0) -#endif -#ifdef CONFIG_SOC_IMX25 -# ifdef mxc_cpu_type -# undef mxc_cpu_type -# define mxc_cpu_type __mxc_cpu_type -# else -# define mxc_cpu_type MXC_CPU_MX25 -# endif -# define cpu_is_mx25() (mxc_cpu_type == MXC_CPU_MX25) -#else -# define cpu_is_mx25() (0) -#endif - -#ifdef CONFIG_SOC_IMX27 -# ifdef mxc_cpu_type -# undef mxc_cpu_type -# define mxc_cpu_type __mxc_cpu_type -# else -# define mxc_cpu_type MXC_CPU_MX27 -# endif -# define cpu_is_mx27() (mxc_cpu_type == MXC_CPU_MX27) -#else -# define cpu_is_mx27() (0) -#endif - -#ifdef CONFIG_SOC_IMX31 -# ifdef mxc_cpu_type -# undef mxc_cpu_type -# define mxc_cpu_type __mxc_cpu_type -# else -# define mxc_cpu_type MXC_CPU_MX31 -# endif -# define cpu_is_mx31() (mxc_cpu_type == MXC_CPU_MX31) -#else -# define cpu_is_mx31() (0) -#endif - -#ifdef CONFIG_SOC_IMX35 -# ifdef mxc_cpu_type -# undef mxc_cpu_type -# define mxc_cpu_type __mxc_cpu_type -# else -# define mxc_cpu_type MXC_CPU_MX35 -# endif -# define cpu_is_mx35() (mxc_cpu_type == MXC_CPU_MX35) -#else -# define cpu_is_mx35() (0) -#endif - -#ifdef CONFIG_SOC_IMX51 -# ifdef mxc_cpu_type -# undef mxc_cpu_type -# define mxc_cpu_type __mxc_cpu_type -# else -# define mxc_cpu_type MXC_CPU_MX51 -# endif -# define cpu_is_mx51() (mxc_cpu_type == MXC_CPU_MX51) -#else -# define cpu_is_mx51() (0) -#endif - -#ifdef CONFIG_SOC_IMX53 -# ifdef mxc_cpu_type -# undef mxc_cpu_type -# define mxc_cpu_type __mxc_cpu_type -# else -# define mxc_cpu_type MXC_CPU_MX53 -# endif -# define cpu_is_mx53() (mxc_cpu_type == MXC_CPU_MX53) -#else -# define cpu_is_mx53() (0) -#endif - -#ifndef __ASSEMBLY__ #ifdef CONFIG_SOC_IMX6SL static inline bool cpu_is_imx6sl(void) { @@ -190,9 +92,6 @@ int tzic_enable_wake(void); extern struct cpu_op *(*get_cpu_op)(int *op); #endif -#define cpu_is_mx3() (cpu_is_mx31() || cpu_is_mx35()) -#define cpu_is_mx2() (cpu_is_mx21() || cpu_is_mx27()) - #define imx_readl readl_relaxed #define imx_readw readw_relaxed #define imx_writel writel_relaxed diff --git a/arch/arm/mach-imx/pm-imx27.c b/arch/arm/mach-imx/pm-imx27.c index 43096c899..d94353556 100644 --- a/arch/arm/mach-imx/pm-imx27.c +++ b/arch/arm/mach-imx/pm-imx27.c @@ -37,13 +37,7 @@ static const struct platform_suspend_ops mx27_suspend_ops = { .valid = suspend_valid_only_mem, }; -static int __init mx27_pm_init(void) +void __init imx27_pm_init(void) { - if (!cpu_is_mx27()) - return 0; - suspend_set_ops(&mx27_suspend_ops); - return 0; } - -device_initcall(mx27_pm_init); diff --git a/arch/arm/mach-imx/system.c b/arch/arm/mach-imx/system.c index 105d1ce4e..c06af650e 100644 --- a/arch/arm/mach-imx/system.c +++ b/arch/arm/mach-imx/system.c @@ -34,25 +34,19 @@ static void __iomem *wdog_base; static struct clk *wdog_clk; +static int wcr_enable = (1 << 2); /* * Reset the system. It is called by machine_restart(). */ void mxc_restart(enum reboot_mode mode, const char *cmd) { - unsigned int wcr_enable; - if (!wdog_base) goto reset_fallback; if (!IS_ERR(wdog_clk)) clk_enable(wdog_clk); - if (cpu_is_mx1()) - wcr_enable = (1 << 0); - else - wcr_enable = (1 << 2); - /* Assert SRS signal */ imx_writew(wcr_enable, wdog_base); /* @@ -89,6 +83,14 @@ void __init mxc_arch_reset_init(void __iomem *base) clk_prepare(wdog_clk); } +#ifdef CONFIG_SOC_IMX1 +void __init imx1_reset_init(void __iomem *base) +{ + wcr_enable = (1 << 0); + mxc_arch_reset_init(base); +} +#endif + #ifdef CONFIG_CACHE_L2X0 void __init imx_init_l2cache(void) { @@ -98,38 +100,28 @@ void __init imx_init_l2cache(void) np = of_find_compatible_node(NULL, NULL, "arm,pl310-cache"); if (!np) - goto out; + return; l2x0_base = of_iomap(np, 0); - if (!l2x0_base) { - of_node_put(np); - goto out; - } + if (!l2x0_base) + goto put_node; - if (readl_relaxed(l2x0_base + L2X0_CTRL) & L2X0_CTRL_EN) - goto skip_if_enabled; + if (!(readl_relaxed(l2x0_base + L2X0_CTRL) & L2X0_CTRL_EN)) { + /* Configure the L2 PREFETCH and POWER registers */ + val = readl_relaxed(l2x0_base + L310_PREFETCH_CTRL); + val |= L310_PREFETCH_CTRL_DBL_LINEFILL | + L310_PREFETCH_CTRL_INSTR_PREFETCH | + L310_PREFETCH_CTRL_DATA_PREFETCH; - /* Configure the L2 PREFETCH and POWER registers */ - val = readl_relaxed(l2x0_base + L310_PREFETCH_CTRL); - val |= 0x70800000; - /* - * The L2 cache controller(PL310) version on the i.MX6D/Q is r3p1-50rel0 - * The L2 cache controller(PL310) version on the i.MX6DL/SOLO/SL is r3p2 - * But according to ARM PL310 errata: 752271 - * ID: 752271: Double linefill feature can cause data corruption - * Fault Status: Present in: r3p0, r3p1, r3p1-50rel0. Fixed in r3p2 - * Workaround: The only workaround to this erratum is to disable the - * double linefill feature. This is the default behavior. - */ - if (cpu_is_imx6q()) - val &= ~(1 << 30 | 1 << 23); - writel_relaxed(val, l2x0_base + L310_PREFETCH_CTRL); + /* Set perfetch offset to improve performance */ + val &= ~L310_PREFETCH_CTRL_OFFSET_MASK; + val |= 15; + + writel_relaxed(val, l2x0_base + L310_PREFETCH_CTRL); + } -skip_if_enabled: iounmap(l2x0_base); +put_node: of_node_put(np); - -out: - l2x0_of_init(0, ~0); } #endif diff --git a/arch/arm/mach-imx/tzic.c b/arch/arm/mach-imx/tzic.c index ae23d50f7..4ca37c3f1 100644 --- a/arch/arm/mach-imx/tzic.c +++ b/arch/arm/mach-imx/tzic.c @@ -9,12 +9,11 @@ * http://www.gnu.org/copyleft/gpl.html */ -#include <linux/module.h> -#include <linux/moduleparam.h> #include <linux/init.h> #include <linux/device.h> #include <linux/errno.h> #include <linux/io.h> +#include <linux/irqchip.h> #include <linux/irqdomain.h> #include <linux/of.h> #include <linux/of_address.h> @@ -56,14 +55,14 @@ static struct irq_domain *domain; #define TZIC_NUM_IRQS 128 #ifdef CONFIG_FIQ -static int tzic_set_irq_fiq(unsigned int irq, unsigned int type) +static int tzic_set_irq_fiq(unsigned int hwirq, unsigned int type) { unsigned int index, mask, value; - index = irq >> 5; + index = hwirq >> 5; if (unlikely(index >= 4)) return -EINVAL; - mask = 1U << (irq & 0x1F); + mask = 1U << (hwirq & 0x1F); value = imx_readl(tzic_base + TZIC_INTSEC0(index)) | mask; if (type) @@ -153,13 +152,11 @@ static void __exception_irq_entry tzic_handle_irq(struct pt_regs *regs) * interrupts. It registers the interrupt enable and disable functions * to the kernel for each interrupt source. */ -void __init tzic_init_irq(void) +static int __init tzic_init_dt(struct device_node *np, struct device_node *p) { - struct device_node *np; int irq_base; int i; - np = of_find_compatible_node(NULL, NULL, "fsl,tzic"); tzic_base = of_iomap(np, 0); WARN_ON(!tzic_base); @@ -199,7 +196,10 @@ void __init tzic_init_irq(void) #endif pr_info("TrustZone Interrupt Controller (TZIC) initialized\n"); + + return 0; } +IRQCHIP_DECLARE(tzic, "fsl,tzic", tzic_init_dt); /** * tzic_enable_wake() - enable wakeup interrupt diff --git a/arch/arm/mach-integrator/Kconfig b/arch/arm/mach-integrator/Kconfig index b2a85ba13..599f973e1 100644 --- a/arch/arm/mach-integrator/Kconfig +++ b/arch/arm/mach-integrator/Kconfig @@ -20,7 +20,7 @@ if ARCH_INTEGRATOR config ARCH_INTEGRATOR_AP bool "Support Integrator/AP and Integrator/PP2 platforms" - select CLKSRC_MMIO + select INTEGRATOR_AP_TIMER select MIGHT_HAVE_PCI select SERIAL_AMBA_PL010 if TTY select SERIAL_AMBA_PL010_CONSOLE if TTY @@ -32,9 +32,9 @@ config ARCH_INTEGRATOR_AP config INTEGRATOR_IMPD1 bool "Include support for Integrator/IM-PD1" depends on ARCH_INTEGRATOR_AP - select ARCH_REQUIRE_GPIOLIB select ARM_VIC - select GPIO_PL061 if GPIOLIB + select GPIO_PL061 + select GPIOLIB help The IM-PD1 is an add-on logic module for the Integrator which allows ARM(R) Ltd PrimeCells to be developed and evaluated. diff --git a/arch/arm/mach-integrator/impd1.c b/arch/arm/mach-integrator/impd1.c index 38b0da300..ed9a01484 100644 --- a/arch/arm/mach-integrator/impd1.c +++ b/arch/arm/mach-integrator/impd1.c @@ -320,11 +320,11 @@ static struct impd1_device impd1_devs[] = { #define IMPD1_VALID_IRQS 0x00000bffU /* - * As this module is bool, it is OK to have this as __init_refok() - no + * As this module is bool, it is OK to have this as __ref() - no * probe calls will be done after the initial system bootup, as devices * are discovered as part of the machine startup. */ -static int __init_refok impd1_probe(struct lm_device *dev) +static int __ref impd1_probe(struct lm_device *dev) { struct impd1_module *impd1; int irq_base; diff --git a/arch/arm/mach-integrator/integrator_ap.c b/arch/arm/mach-integrator/integrator_ap.c index 2b118f20c..c7bb83205 100644 --- a/arch/arm/mach-integrator/integrator_ap.c +++ b/arch/arm/mach-integrator/integrator_ap.c @@ -240,8 +240,7 @@ static void __init ap_init_of(void) if (!ebi_base) return; - of_platform_populate(NULL, of_default_bus_match_table, - ap_auxdata_lookup, NULL); + of_platform_default_populate(NULL, ap_auxdata_lookup, NULL); sc_dec = readl(ap_syscon_base + INTEGRATOR_SC_DEC_OFFSET); for (i = 0; i < 4; i++) { diff --git a/arch/arm/mach-integrator/integrator_cp.c b/arch/arm/mach-integrator/integrator_cp.c index 6f6b051e8..825298349 100644 --- a/arch/arm/mach-integrator/integrator_cp.c +++ b/arch/arm/mach-integrator/integrator_cp.c @@ -231,8 +231,7 @@ static void __init intcp_init_of(void) if (!intcp_con_base) return; - of_platform_populate(NULL, of_default_bus_match_table, - intcp_auxdata_lookup, NULL); + of_platform_default_populate(NULL, intcp_auxdata_lookup, NULL); } static const char * intcp_dt_board_compat[] = { diff --git a/arch/arm/mach-keystone/Kconfig b/arch/arm/mach-keystone/Kconfig index ea955f6db..8ff61be1a 100644 --- a/arch/arm/mach-keystone/Kconfig +++ b/arch/arm/mach-keystone/Kconfig @@ -1,16 +1,16 @@ config ARCH_KEYSTONE bool "Texas Instruments Keystone Devices" depends on ARCH_MULTI_V7 - depends on ARM_PATCH_PHYS_VIRT select ARM_GIC select HAVE_ARM_ARCH_TIMER - select CLKSRC_MMIO + select KEYSTONE_TIMER select ARM_ERRATA_798181 if SMP select COMMON_CLK_KEYSTONE select ARCH_SUPPORTS_BIG_ENDIAN select ZONE_DMA if ARM_LPAE select MIGHT_HAVE_PCI select PCI_DOMAINS if PCI + select PINCTRL help Support for boards based on the Texas Instruments Keystone family of SoCs. diff --git a/arch/arm/mach-keystone/keystone.c b/arch/arm/mach-keystone/keystone.c index a33a296b0..84613abf3 100644 --- a/arch/arm/mach-keystone/keystone.c +++ b/arch/arm/mach-keystone/keystone.c @@ -60,7 +60,6 @@ static void __init keystone_init(void) bus_register_notifier(&platform_bus_type, &platform_nb); } keystone_pm_runtime_init(); - of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL); } static long long __init keystone_pv_fixup(void) diff --git a/arch/arm/mach-keystone/pm_domain.c b/arch/arm/mach-keystone/pm_domain.c index e283939a2..8cbb35765 100644 --- a/arch/arm/mach-keystone/pm_domain.c +++ b/arch/arm/mach-keystone/pm_domain.c @@ -18,6 +18,8 @@ #include <linux/platform_device.h> #include <linux/of.h> +#include "keystone.h" + static struct dev_pm_domain keystone_pm_domain = { .ops = { USE_PM_CLK_RUNTIME_OPS diff --git a/arch/arm/mach-lpc32xx/phy3250.c b/arch/arm/mach-lpc32xx/phy3250.c index 81265e803..0e4cbbe98 100644 --- a/arch/arm/mach-lpc32xx/phy3250.c +++ b/arch/arm/mach-lpc32xx/phy3250.c @@ -191,8 +191,7 @@ static void __init lpc3250_machine_init(void) LPC32XX_CLKPWR_TESTCLK_TESTCLK2_EN, LPC32XX_CLKPWR_TEST_CLK_SEL); - of_platform_populate(NULL, of_default_bus_match_table, - lpc32xx_auxdata_lookup, NULL); + of_platform_default_populate(NULL, lpc32xx_auxdata_lookup, NULL); } static const char *const lpc32xx_dt_compat[] __initconst = { diff --git a/arch/arm/mach-meson/Kconfig b/arch/arm/mach-meson/Kconfig index 31bdd9109..b6e3acc63 100644 --- a/arch/arm/mach-meson/Kconfig +++ b/arch/arm/mach-meson/Kconfig @@ -1,12 +1,14 @@ menuconfig ARCH_MESON bool "Amlogic Meson SoCs" depends on ARCH_MULTI_V7 - select ARCH_REQUIRE_GPIOLIB + select GPIOLIB select GENERIC_IRQ_CHIP select ARM_GIC select CACHE_L2X0 select PINCTRL select PINCTRL_MESON + select COMMON_CLK + select COMMON_CLK_AMLOGIC if ARCH_MESON @@ -24,5 +26,6 @@ config MACH_MESON8B bool "Amlogic Meson8b SoCs support" default ARCH_MESON select MESON6_TIMER + select COMMON_CLK_MESON8B endif diff --git a/arch/arm/mach-mmp/Kconfig b/arch/arm/mach-mmp/Kconfig index 01c57d369..94500bed5 100644 --- a/arch/arm/mach-mmp/Kconfig +++ b/arch/arm/mach-mmp/Kconfig @@ -1,8 +1,8 @@ menuconfig ARCH_MMP bool "Marvell PXA168/910/MMP2" depends on ARCH_MULTI_V5 || ARCH_MULTI_V7 - select ARCH_REQUIRE_GPIOLIB select GPIO_PXA + select GPIOLIB select PINCTRL select PLAT_PXA help diff --git a/arch/arm/mach-moxart/Kconfig b/arch/arm/mach-moxart/Kconfig index 180d9d216..f69e28b85 100644 --- a/arch/arm/mach-moxart/Kconfig +++ b/arch/arm/mach-moxart/Kconfig @@ -3,9 +3,9 @@ menuconfig ARCH_MOXART depends on ARCH_MULTI_V4 select CPU_FA526 select ARM_DMA_MEM_BUFFERABLE - select CLKSRC_MMIO + select MOXART_TIMER select GENERIC_IRQ_CHIP - select ARCH_REQUIRE_GPIOLIB + select GPIOLIB select PHYLIB if NETDEVICES help Say Y here if you want to run your kernel on hardware with a diff --git a/arch/arm/mach-mv78xx0/Kconfig b/arch/arm/mach-mv78xx0/Kconfig index c32f85559..81c0f08a2 100644 --- a/arch/arm/mach-mv78xx0/Kconfig +++ b/arch/arm/mach-mv78xx0/Kconfig @@ -1,8 +1,8 @@ menuconfig ARCH_MV78XX0 bool "Marvell MV78xx0" depends on ARCH_MULTI_V5 - select ARCH_REQUIRE_GPIOLIB select CPU_FEROCEON + select GPIOLIB select MVEBU_MBUS select PCI select PLAT_ORION_LEGACY diff --git a/arch/arm/mach-mv78xx0/common.c b/arch/arm/mach-mv78xx0/common.c index 45a05207b..6af5430d0 100644 --- a/arch/arm/mach-mv78xx0/common.c +++ b/arch/arm/mach-mv78xx0/common.c @@ -343,7 +343,7 @@ void __init mv78xx0_init_early(void) DDR_WINDOW_CPU1_BASE, DDR_WINDOW_CPU_SZ); } -void __init_refok mv78xx0_timer_init(void) +void __ref mv78xx0_timer_init(void) { orion_time_init(BRIDGE_VIRT_BASE, BRIDGE_INT_TIMER1_CLR, IRQ_MV78XX0_TIMER_1, get_tclk()); diff --git a/arch/arm/mach-mvebu/Kconfig b/arch/arm/mach-mvebu/Kconfig index 348044ea6..f9b6bd306 100644 --- a/arch/arm/mach-mvebu/Kconfig +++ b/arch/arm/mach-mvebu/Kconfig @@ -8,7 +8,7 @@ menuconfig ARCH_MVEBU select SOC_BUS select MVEBU_MBUS select ZONE_DMA if ARM_LPAE - select ARCH_REQUIRE_GPIOLIB + select GPIOLIB select PCI_QUIRKS if PCI select OF_ADDRESS_PCI @@ -119,8 +119,8 @@ config MACH_DOVE config MACH_KIRKWOOD bool "Marvell Kirkwood boards" depends on ARCH_MULTI_V5 - select ARCH_REQUIRE_GPIOLIB select CPU_FEROCEON + select GPIOLIB select KIRKWOOD_CLK select MACH_MVEBU_ANY select ORION_IRQCHIP diff --git a/arch/arm/mach-mvebu/Makefile b/arch/arm/mach-mvebu/Makefile index e53c6cfca..6c6497e80 100644 --- a/arch/arm/mach-mvebu/Makefile +++ b/arch/arm/mach-mvebu/Makefile @@ -1,5 +1,4 @@ -ccflags-$(CONFIG_ARCH_MULTIPLATFORM) := -I$(srctree)/$(src)/include \ - -I$(srctree)/arch/arm/plat-orion/include +ccflags-$(CONFIG_ARCH_MULTIPLATFORM) := -I$(srctree)/arch/arm/plat-orion/include AFLAGS_coherency_ll.o := -Wa,-march=armv7-a CFLAGS_pmsu.o := -march=armv7-a diff --git a/arch/arm/mach-mvebu/board-v7.c b/arch/arm/mach-mvebu/board-v7.c index 1648edd51..ccca95173 100644 --- a/arch/arm/mach-mvebu/board-v7.c +++ b/arch/arm/mach-mvebu/board-v7.c @@ -16,7 +16,6 @@ #include <linux/init.h> #include <linux/of_address.h> #include <linux/of_fdt.h> -#include <linux/of_platform.h> #include <linux/io.h> #include <linux/clocksource.h> #include <linux/dma-mapping.h> @@ -144,8 +143,6 @@ static void __init mvebu_dt_init(void) { if (of_machine_is_compatible("marvell,armadaxp")) i2c_quirk(); - - of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL); } static const char * const armada_370_xp_dt_compat[] __initconst = { diff --git a/arch/arm/mach-mvebu/coherency.c b/arch/arm/mach-mvebu/coherency.c index e80f0dde2..ae2a018b9 100644 --- a/arch/arm/mach-mvebu/coherency.c +++ b/arch/arm/mach-mvebu/coherency.c @@ -111,20 +111,12 @@ static struct notifier_block mvebu_hwcc_pci_nb __maybe_unused = { .notifier_call = mvebu_hwcc_notifier, }; -static int armada_xp_clear_shared_l2_notifier_func(struct notifier_block *nfb, - unsigned long action, void *hcpu) +static int armada_xp_clear_l2_starting(unsigned int cpu) { - if (action == CPU_STARTING || action == CPU_STARTING_FROZEN) - armada_xp_clear_shared_l2(); - - return NOTIFY_OK; + armada_xp_clear_shared_l2(); + return 0; } -static struct notifier_block armada_xp_clear_shared_l2_notifier = { - .notifier_call = armada_xp_clear_shared_l2_notifier_func, - .priority = 100, -}; - static void __init armada_370_coherency_init(struct device_node *np) { struct resource res; @@ -155,8 +147,9 @@ static void __init armada_370_coherency_init(struct device_node *np) of_node_put(cpu_config_np); - register_cpu_notifier(&armada_xp_clear_shared_l2_notifier); - + cpuhp_setup_state_nocalls(CPUHP_AP_ARM_MVEBU_COHERENCY, + "AP_ARM_MVEBU_COHERENCY", + armada_xp_clear_l2_starting, NULL); exit: set_cpu_coherent(); } diff --git a/arch/arm/mach-mvebu/coherency.h b/arch/arm/mach-mvebu/coherency.h index 54cb7607b..6067f1426 100644 --- a/arch/arm/mach-mvebu/coherency.h +++ b/arch/arm/mach-mvebu/coherency.h @@ -14,6 +14,7 @@ #ifndef __MACH_370_XP_COHERENCY_H #define __MACH_370_XP_COHERENCY_H +extern void __iomem *coherency_base; /* for coherency_ll.S */ extern unsigned long coherency_phys_base; int set_cpu_coherent(void); diff --git a/arch/arm/mach-mvebu/cpu-reset.c b/arch/arm/mach-mvebu/cpu-reset.c index 4a2cadd6b..f33a31c6a 100644 --- a/arch/arm/mach-mvebu/cpu-reset.c +++ b/arch/arm/mach-mvebu/cpu-reset.c @@ -16,6 +16,8 @@ #include <linux/io.h> #include <linux/resource.h> +#include "common.h" + static void __iomem *cpu_reset_base; static size_t cpu_reset_size; diff --git a/arch/arm/mach-mvebu/dove.c b/arch/arm/mach-mvebu/dove.c index 1aebb82e3..d076c5771 100644 --- a/arch/arm/mach-mvebu/dove.c +++ b/arch/arm/mach-mvebu/dove.c @@ -11,7 +11,6 @@ #include <linux/init.h> #include <linux/mbus.h> #include <linux/of.h> -#include <linux/of_platform.h> #include <linux/soc/dove/pmu.h> #include <asm/hardware/cache-tauros2.h> #include <asm/mach/arch.h> @@ -26,7 +25,6 @@ static void __init dove_init(void) #endif BUG_ON(mvebu_mbus_dt_init(false)); dove_init_pmu(); - of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL); } static const char * const dove_dt_compat[] __initconst = { diff --git a/arch/arm/mach-mvebu/kirkwood-pm.c b/arch/arm/mach-mvebu/kirkwood-pm.c index cbb816f21..1e1f879f1 100644 --- a/arch/arm/mach-mvebu/kirkwood-pm.c +++ b/arch/arm/mach-mvebu/kirkwood-pm.c @@ -18,6 +18,7 @@ #include <linux/suspend.h> #include <linux/io.h> #include "kirkwood.h" +#include "kirkwood-pm.h" static void __iomem *ddr_operation_base; static void __iomem *memory_pm_ctrl; @@ -66,11 +67,10 @@ static const struct platform_suspend_ops kirkwood_suspend_ops = { .valid = kirkwood_pm_valid_standby, }; -int __init kirkwood_pm_init(void) +void __init kirkwood_pm_init(void) { ddr_operation_base = ioremap(DDR_OPERATION_BASE, 4); memory_pm_ctrl = ioremap(MEMORY_PM_CTRL_PHYS, 4); suspend_set_ops(&kirkwood_suspend_ops); - return 0; } diff --git a/arch/arm/mach-mvebu/kirkwood.c b/arch/arm/mach-mvebu/kirkwood.c index f9d8e1ea7..7d9f2fd9e 100644 --- a/arch/arm/mach-mvebu/kirkwood.c +++ b/arch/arm/mach-mvebu/kirkwood.c @@ -150,7 +150,7 @@ eth_fixup_skip: * causes mbus errors (which can occur for example for PCI aborts) to * throw CPU aborts, which we're not set up to deal with. */ -void kirkwood_disable_mbus_error_propagation(void) +static void kirkwood_disable_mbus_error_propagation(void) { void __iomem *cpu_config; @@ -179,7 +179,7 @@ static void __init kirkwood_dt_init(void) kirkwood_pm_init(); kirkwood_dt_eth_fixup(); - of_platform_populate(NULL, of_default_bus_match_table, auxdata, NULL); + of_platform_default_populate(NULL, auxdata, NULL); } static const char * const kirkwood_dt_board_compat[] __initconst = { diff --git a/arch/arm/mach-mvebu/pm.c b/arch/arm/mach-mvebu/pm.c index 8d32bf762..2990c5269 100644 --- a/arch/arm/mach-mvebu/pm.c +++ b/arch/arm/mach-mvebu/pm.c @@ -23,6 +23,7 @@ #include <asm/suspend.h> #include "coherency.h" +#include "common.h" #include "pmsu.h" #define SDRAM_CONFIG_OFFS 0x0 diff --git a/arch/arm/mach-mvebu/pmsu.c b/arch/arm/mach-mvebu/pmsu.c index b44442338..f39bd51bc 100644 --- a/arch/arm/mach-mvebu/pmsu.c +++ b/arch/arm/mach-mvebu/pmsu.c @@ -25,6 +25,7 @@ #include <linux/io.h> #include <linux/kernel.h> #include <linux/mbus.h> +#include <linux/mvebu-pmsu.h> #include <linux/of_address.h> #include <linux/of_device.h> #include <linux/platform_device.h> @@ -38,7 +39,7 @@ #include <asm/suspend.h> #include <asm/tlbflush.h> #include "common.h" - +#include "pmsu.h" #define PMSU_BASE_OFFSET 0x100 #define PMSU_REG_SIZE 0x1000 diff --git a/arch/arm/mach-mvebu/system-controller.c b/arch/arm/mach-mvebu/system-controller.c index c6c132acd..76cbc82a7 100644 --- a/arch/arm/mach-mvebu/system-controller.c +++ b/arch/arm/mach-mvebu/system-controller.c @@ -127,7 +127,7 @@ int mvebu_system_controller_get_soc_id(u32 *dev, u32 *rev) } #if defined(CONFIG_SMP) && defined(CONFIG_MACH_MVEBU_V7) -void mvebu_armada375_smp_wa_init(void) +static void mvebu_armada375_smp_wa_init(void) { u32 dev, rev; phys_addr_t resume_addr_reg; diff --git a/arch/arm/mach-mxs/Kconfig b/arch/arm/mach-mxs/Kconfig index 84794137b..cb429bc6d 100644 --- a/arch/arm/mach-mxs/Kconfig +++ b/arch/arm/mach-mxs/Kconfig @@ -15,8 +15,8 @@ config SOC_IMX28 config ARCH_MXS bool "Freescale MXS (i.MX23, i.MX28) support" depends on ARCH_MULTI_V5 - select ARCH_REQUIRE_GPIOLIB - select CLKSRC_MMIO + select GPIOLIB + select MXS_TIMER select PINCTRL select SOC_BUS select SOC_IMX23 diff --git a/arch/arm/mach-mxs/mach-mxs.c b/arch/arm/mach-mxs/mach-mxs.c index f1ea4700e..0b7fe74ff 100644 --- a/arch/arm/mach-mxs/mach-mxs.c +++ b/arch/arm/mach-mxs/mach-mxs.c @@ -498,8 +498,7 @@ static void __init mxs_machine_init(void) else if (of_machine_is_compatible("msr,m28cu3")) m28cu3_init(); - of_platform_populate(NULL, of_default_bus_match_table, - NULL, parent); + of_platform_default_populate(NULL, NULL, parent); mxs_restart_init(); diff --git a/arch/arm/mach-nomadik/Kconfig b/arch/arm/mach-nomadik/Kconfig index 3c61096c8..b7e9801fd 100644 --- a/arch/arm/mach-nomadik/Kconfig +++ b/arch/arm/mach-nomadik/Kconfig @@ -1,12 +1,12 @@ menuconfig ARCH_NOMADIK bool "ST-Ericsson Nomadik" depends on ARCH_MULTI_V5 - select ARCH_REQUIRE_GPIOLIB select ARM_AMBA select ARM_VIC select CLKSRC_NOMADIK_MTU select CLKSRC_NOMADIK_MTU_SCHED_CLOCK select CPU_ARM926T + select GPIOLIB select MIGHT_HAVE_CACHE_L2X0 select PINCTRL select PINCTRL_NOMADIK diff --git a/arch/arm/mach-nspire/Kconfig b/arch/arm/mach-nspire/Kconfig index bc41f26c1..d4985305c 100644 --- a/arch/arm/mach-nspire/Kconfig +++ b/arch/arm/mach-nspire/Kconfig @@ -7,5 +7,6 @@ config ARCH_NSPIRE select ARM_AMBA select ARM_VIC select ARM_TIMER_SP804 + select NSPIRE_TIMER help This enables support for systems using the TI-NSPIRE CPU diff --git a/arch/arm/mach-nspire/nspire.c b/arch/arm/mach-nspire/nspire.c index 34c2a1b32..f0808fcc5 100644 --- a/arch/arm/mach-nspire/nspire.c +++ b/arch/arm/mach-nspire/nspire.c @@ -57,8 +57,7 @@ static struct of_dev_auxdata nspire_auxdata[] __initdata = { static void __init nspire_init(void) { - of_platform_populate(NULL, of_default_bus_match_table, - nspire_auxdata, NULL); + of_platform_default_populate(NULL, nspire_auxdata, NULL); } static void nspire_restart(enum reboot_mode mode, const char *cmd) diff --git a/arch/arm/mach-omap1/ams-delta-fiq.c b/arch/arm/mach-omap1/ams-delta-fiq.c index ec760ae2f..793a24a53 100644 --- a/arch/arm/mach-omap1/ams-delta-fiq.c +++ b/arch/arm/mach-omap1/ams-delta-fiq.c @@ -137,7 +137,7 @@ void __init ams_delta_init_fiq(void) fiq_buffer[i] = 0; /* - * FIQ mode r9 always points to the fiq_buffer, becauses the FIQ isr + * FIQ mode r9 always points to the fiq_buffer, because the FIQ isr * will run in an unpredictable context. The fiq_buffer is the FIQ isr's * only means of communication with the IRQ level and other kernel * context code. diff --git a/arch/arm/mach-omap1/board-osk.c b/arch/arm/mach-omap1/board-osk.c index 209aecb0d..4dfb99504 100644 --- a/arch/arm/mach-omap1/board-osk.c +++ b/arch/arm/mach-omap1/board-osk.c @@ -172,7 +172,7 @@ static struct gpio_led tps_leds[] = { * Also, D9 requires non-battery power. */ { .gpio = OSK_TPS_GPIO_LED_D9, .name = "d9", - .default_trigger = "ide-disk", }, + .default_trigger = "disk-activity", }, { .gpio = OSK_TPS_GPIO_LED_D2, .name = "d2", }, { .gpio = OSK_TPS_GPIO_LED_D3, .name = "d3", .active_low = 1, .default_trigger = "heartbeat", }, diff --git a/arch/arm/mach-omap1/include/mach/mtd-xip.h b/arch/arm/mach-omap1/include/mach/mtd-xip.h index f82a8dcaa..d09b2bc49 100644 --- a/arch/arm/mach-omap1/include/mach/mtd-xip.h +++ b/arch/arm/mach-omap1/include/mach/mtd-xip.h @@ -39,7 +39,7 @@ static inline unsigned long xip_omap_mpu_timer_read(int nr) #define xip_currtime() (~xip_omap_mpu_timer_read(0)) /* - * It's permitted to do approxmation for xip_elapsed_since macro + * It's permitted to do approximation for xip_elapsed_since macro * (see linux/mtd/xip.h) */ diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig index 1a648e9df..5a0b380a8 100644 --- a/arch/arm/mach-omap2/Kconfig +++ b/arch/arm/mach-omap2/Kconfig @@ -92,9 +92,9 @@ config ARCH_OMAP2PLUS select ARCH_HAS_BANDGAP select ARCH_HAS_HOLES_MEMORYMODEL select ARCH_OMAP - select ARCH_REQUIRE_GPIOLIB select CLKSRC_MMIO select GENERIC_IRQ_CHIP + select GPIOLIB select MACH_OMAP_GENERIC select MEMORY select MFD_SYSCON diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile index 04e276ce8..a7f2d051f 100644 --- a/arch/arm/mach-omap2/Makefile +++ b/arch/arm/mach-omap2/Makefile @@ -8,7 +8,7 @@ ccflags-y := -I$(srctree)/$(src)/include \ # Common support obj-y := id.o io.o control.o mux.o devices.o fb.o serial.o timer.o pm.o \ common.o gpio.o dma.o wd_timer.o display.o i2c.o hdq1w.o omap_hwmod.o \ - omap_device.o sram.o drm.o + omap_device.o omap-headsmp.o sram.o drm.o hwmod-common = omap_hwmod.o omap_hwmod_reset.o \ omap_hwmod_common_data.o @@ -32,7 +32,7 @@ obj-$(CONFIG_SOC_HAS_OMAP2_SDRC) += sdrc.o # SMP support ONLY available for OMAP4 -smp-$(CONFIG_SMP) += omap-smp.o omap-headsmp.o +smp-$(CONFIG_SMP) += omap-smp.o smp-$(CONFIG_HOTPLUG_CPU) += omap-hotplug.o omap-4-5-common = omap4-common.o omap-wakeupgen.o obj-$(CONFIG_ARCH_OMAP4) += $(omap-4-5-common) $(smp-y) sleep44xx.o @@ -78,13 +78,16 @@ obj-$(CONFIG_ARCH_OMAP4) += opp4xxx_data.o endif # Power Management +omap-4-5-pm-common = omap-mpuss-lowpower.o +obj-$(CONFIG_ARCH_OMAP4) += $(omap-4-5-pm-common) +obj-$(CONFIG_ARCH_OMAP5) += $(omap-4-5-pm-common) obj-$(CONFIG_OMAP_PM_NOOP) += omap-pm-noop.o ifeq ($(CONFIG_PM),y) obj-$(CONFIG_ARCH_OMAP2) += pm24xx.o obj-$(CONFIG_ARCH_OMAP2) += sleep24xx.o obj-$(CONFIG_ARCH_OMAP3) += pm34xx.o sleep34xx.o -omap-4-5-pm-common = pm44xx.o omap-mpuss-lowpower.o +omap-4-5-pm-common += pm44xx.o obj-$(CONFIG_ARCH_OMAP4) += $(omap-4-5-pm-common) obj-$(CONFIG_SOC_OMAP5) += $(omap-4-5-pm-common) obj-$(CONFIG_SOC_DRA7XX) += $(omap-4-5-pm-common) diff --git a/arch/arm/mach-omap2/board-ldp.c b/arch/arm/mach-omap2/board-ldp.c index d9c3ffc39..390795b33 100644 --- a/arch/arm/mach-omap2/board-ldp.c +++ b/arch/arm/mach-omap2/board-ldp.c @@ -39,7 +39,7 @@ #include "gpmc.h" #include "gpmc-smsc911x.h" -#include <video/omapdss.h> +#include <linux/platform_data/omapdss.h> #include <video/omap-panel-data.h> #include "board-flash.h" @@ -47,6 +47,7 @@ #include "hsmmc.h" #include "control.h" #include "common-board-devices.h" +#include "display.h" #define LDP_SMSC911X_CS 1 #define LDP_SMSC911X_GPIO 152 diff --git a/arch/arm/mach-omap2/board-rx51-peripherals.c b/arch/arm/mach-omap2/board-rx51-peripherals.c index 9a7073949..a5ab712c1 100644 --- a/arch/arm/mach-omap2/board-rx51-peripherals.c +++ b/arch/arm/mach-omap2/board-rx51-peripherals.c @@ -1242,11 +1242,6 @@ static struct pwm_omap_dmtimer_pdata __maybe_unused pwm_dmtimer_pdata = { #if defined(CONFIG_IR_RX51) || defined(CONFIG_IR_RX51_MODULE) static struct lirc_rx51_platform_data rx51_lirc_data = { .set_max_mpu_wakeup_lat = omap_pm_set_max_mpu_wakeup_lat, - .pwm_timer = 9, /* Use GPT 9 for CIR */ -#if IS_ENABLED(CONFIG_OMAP_DM_TIMER) - .dmtimer = &pwm_dmtimer_pdata, -#endif - }; static struct platform_device rx51_lirc_device = { diff --git a/arch/arm/mach-omap2/board-rx51-video.c b/arch/arm/mach-omap2/board-rx51-video.c index 9cfebc5c7..180c6aa63 100644 --- a/arch/arm/mach-omap2/board-rx51-video.c +++ b/arch/arm/mach-omap2/board-rx51-video.c @@ -15,13 +15,14 @@ #include <linux/spi/spi.h> #include <linux/mm.h> #include <asm/mach-types.h> -#include <video/omapdss.h> +#include <linux/platform_data/omapdss.h> #include <video/omap-panel-data.h> #include <linux/platform_data/spi-omap2-mcspi.h> #include "soc.h" #include "board-rx51.h" +#include "display.h" #include "mux.h" @@ -32,7 +33,6 @@ static struct connector_atv_platform_data rx51_tv_pdata = { .name = "tv", .source = "venc.0", - .connector_type = OMAP_DSS_VENC_TYPE_COMPOSITE, .invert_polarity = false, }; diff --git a/arch/arm/mach-omap2/clockdomain.c b/arch/arm/mach-omap2/clockdomain.c index 2da3b5ec0..b79b1ca9a 100644 --- a/arch/arm/mach-omap2/clockdomain.c +++ b/arch/arm/mach-omap2/clockdomain.c @@ -465,10 +465,7 @@ int clkdm_complete_init(void) return -EACCES; list_for_each_entry(clkdm, &clkdm_list, node) { - if (clkdm->flags & CLKDM_CAN_FORCE_WAKEUP) - clkdm_wakeup(clkdm); - else if (clkdm->flags & CLKDM_CAN_DISABLE_AUTO) - clkdm_deny_idle(clkdm); + clkdm_deny_idle(clkdm); _resolve_clkdm_deps(clkdm, clkdm->wkdep_srcs); clkdm_clear_all_wkdeps(clkdm); @@ -925,11 +922,20 @@ void clkdm_allow_idle_nolock(struct clockdomain *clkdm) if (!clkdm) return; - if (!(clkdm->flags & CLKDM_CAN_ENABLE_AUTO)) { - pr_debug("clock: %s: automatic idle transitions cannot be enabled\n", - clkdm->name); + if (!WARN_ON(!clkdm->forcewake_count)) + clkdm->forcewake_count--; + + if (clkdm->forcewake_count) + return; + + if (!clkdm->usecount && (clkdm->flags & CLKDM_CAN_FORCE_SLEEP)) + clkdm_sleep_nolock(clkdm); + + if (!(clkdm->flags & CLKDM_CAN_ENABLE_AUTO)) + return; + + if (clkdm->flags & CLKDM_MISSING_IDLE_REPORTING) return; - } if (!arch_clkdm || !arch_clkdm->clkdm_allow_idle) return; @@ -974,11 +980,17 @@ void clkdm_deny_idle_nolock(struct clockdomain *clkdm) if (!clkdm) return; - if (!(clkdm->flags & CLKDM_CAN_DISABLE_AUTO)) { - pr_debug("clockdomain: %s: automatic idle transitions cannot be disabled\n", - clkdm->name); + if (clkdm->forcewake_count++) + return; + + if (clkdm->flags & CLKDM_CAN_FORCE_WAKEUP) + clkdm_wakeup_nolock(clkdm); + + if (!(clkdm->flags & CLKDM_CAN_DISABLE_AUTO)) + return; + + if (clkdm->flags & CLKDM_MISSING_IDLE_REPORTING) return; - } if (!arch_clkdm || !arch_clkdm->clkdm_deny_idle) return; diff --git a/arch/arm/mach-omap2/clockdomain.h b/arch/arm/mach-omap2/clockdomain.h index 2c398ce1a..24667a5a9 100644 --- a/arch/arm/mach-omap2/clockdomain.h +++ b/arch/arm/mach-omap2/clockdomain.h @@ -114,6 +114,7 @@ struct omap_hwmod; * @wkdep_srcs: Clockdomains that can be told to wake this powerdomain up * @sleepdep_srcs: Clockdomains that can be told to keep this clkdm from inact * @usecount: Usecount tracking + * @forcewake_count: Usecount for forcing the domain active * @node: list_head to link all clockdomains together * * @prcm_partition should be a macro from mach-omap2/prcm44xx.h (OMAP4 only) @@ -138,6 +139,7 @@ struct clockdomain { struct clkdm_dep *wkdep_srcs; struct clkdm_dep *sleepdep_srcs; int usecount; + int forcewake_count; struct list_head node; }; diff --git a/arch/arm/mach-omap2/cm33xx.c b/arch/arm/mach-omap2/cm33xx.c index 7b181f929..6f2d0aec0 100644 --- a/arch/arm/mach-omap2/cm33xx.c +++ b/arch/arm/mach-omap2/cm33xx.c @@ -243,9 +243,6 @@ static int am33xx_cm_wait_module_idle(u8 part, s16 inst, u16 clkctrl_offs, { int i = 0; - if (!clkctrl_offs) - return 0; - omap_test_timeout((_clkctrl_idlest(inst, clkctrl_offs) == CLKCTRL_IDLEST_DISABLED), MAX_MODULE_READY_TIME, i); diff --git a/arch/arm/mach-omap2/cm3xxx.c b/arch/arm/mach-omap2/cm3xxx.c index 187fa4386..d91ae8206 100644 --- a/arch/arm/mach-omap2/cm3xxx.c +++ b/arch/arm/mach-omap2/cm3xxx.c @@ -649,7 +649,7 @@ void omap3_cm_save_scratchpad_contents(u32 *ptr) /* * As per erratum i671, ROM code does not respect the PER DPLL * programming scheme if CM_AUTOIDLE_PLL..AUTO_PERIPH_DPLL == 1. - * Then, in anycase, clear these bits to avoid extra latencies. + * Then, in any case, clear these bits to avoid extra latencies. */ *ptr++ = omap2_cm_read_mod_reg(PLL_MOD, CM_AUTOIDLE) & ~OMAP3430_AUTO_PERIPH_DPLL_MASK; diff --git a/arch/arm/mach-omap2/cminst44xx.c b/arch/arm/mach-omap2/cminst44xx.c index 2c0e07ed6..2ab27ade1 100644 --- a/arch/arm/mach-omap2/cminst44xx.c +++ b/arch/arm/mach-omap2/cminst44xx.c @@ -278,9 +278,6 @@ static int omap4_cminst_wait_module_ready(u8 part, s16 inst, u16 clkctrl_offs, { int i = 0; - if (!clkctrl_offs) - return 0; - omap_test_timeout(_is_module_ready(part, inst, clkctrl_offs), MAX_MODULE_READY_TIME, i); @@ -304,9 +301,6 @@ static int omap4_cminst_wait_module_idle(u8 part, s16 inst, u16 clkctrl_offs, { int i = 0; - if (!clkctrl_offs) - return 0; - omap_test_timeout((_clkctrl_idlest(part, inst, clkctrl_offs) == CLKCTRL_IDLEST_DISABLED), MAX_MODULE_DISABLE_TIME, i); diff --git a/arch/arm/mach-omap2/common.h b/arch/arm/mach-omap2/common.h index f7666b9f3..deed42e1d 100644 --- a/arch/arm/mach-omap2/common.h +++ b/arch/arm/mach-omap2/common.h @@ -257,18 +257,22 @@ extern void gic_dist_enable(void); extern bool gic_dist_disabled(void); extern void gic_timer_retrigger(void); extern void omap_smc1(u32 fn, u32 arg); +extern void omap4_sar_ram_init(void); extern void __iomem *omap4_get_sar_ram_base(void); +extern void omap4_mpuss_early_init(void); extern void omap_do_wfi(void); -#ifdef CONFIG_SMP -/* Needed for secondary core boot */ extern void omap4_secondary_startup(void); extern void omap4460_secondary_startup(void); + +#ifdef CONFIG_SMP +/* Needed for secondary core boot */ extern u32 omap_modify_auxcoreboot0(u32 set_mask, u32 clear_mask); extern void omap_auxcoreboot_addr(u32 cpu_addr); extern u32 omap_read_auxcoreboot0(void); extern void omap4_cpu_die(unsigned int cpu); +extern int omap4_cpu_kill(unsigned int cpu); extern const struct smp_operations omap4_smp_ops; diff --git a/arch/arm/mach-omap2/cpuidle44xx.c b/arch/arm/mach-omap2/cpuidle44xx.c index 4b8e9f4d5..fa138d403 100644 --- a/arch/arm/mach-omap2/cpuidle44xx.c +++ b/arch/arm/mach-omap2/cpuidle44xx.c @@ -140,7 +140,7 @@ static int omap_enter_idle_coupled(struct cpuidle_device *dev, mpuss_can_lose_context) gic_dist_disable(); - clkdm_wakeup(cpu_clkdm[1]); + clkdm_deny_idle(cpu_clkdm[1]); omap_set_pwrdm_state(cpu_pd[1], PWRDM_POWER_ON); clkdm_allow_idle(cpu_clkdm[1]); diff --git a/arch/arm/mach-omap2/display.c b/arch/arm/mach-omap2/display.c index 6ab13d18c..70b3eaf08 100644 --- a/arch/arm/mach-omap2/display.c +++ b/arch/arm/mach-omap2/display.c @@ -29,7 +29,7 @@ #include <linux/mfd/syscon.h> #include <linux/regmap.h> -#include <video/omapdss.h> +#include <linux/platform_data/omapdss.h> #include "omap_hwmod.h" #include "omap_device.h" #include "omap-pm.h" diff --git a/arch/arm/mach-omap2/display.h b/arch/arm/mach-omap2/display.h index 7375854b1..78f253005 100644 --- a/arch/arm/mach-omap2/display.h +++ b/arch/arm/mach-omap2/display.h @@ -33,4 +33,9 @@ int omap_init_vout(void); struct device_node * __init omapdss_find_dss_of_node(void); +struct omap_dss_board_info; + +/* Init with the board info */ +int omap_display_init(struct omap_dss_board_info *board_data); + #endif diff --git a/arch/arm/mach-omap2/dss-common.c b/arch/arm/mach-omap2/dss-common.c index ea2be0f59..1d583bc0b 100644 --- a/arch/arm/mach-omap2/dss-common.c +++ b/arch/arm/mach-omap2/dss-common.c @@ -27,7 +27,7 @@ #include <linux/gpio.h> #include <linux/platform_device.h> -#include <video/omapdss.h> +#include <linux/platform_data/omapdss.h> #include <video/omap-panel-data.h> #include "soc.h" diff --git a/arch/arm/mach-omap2/io.c b/arch/arm/mach-omap2/io.c index 49de4dd22..0e9acdd95 100644 --- a/arch/arm/mach-omap2/io.c +++ b/arch/arm/mach-omap2/io.c @@ -690,6 +690,8 @@ void __init omap4430_init_early(void) omap4xxx_check_revision(); omap4xxx_check_features(); omap2_prcm_base_init(); + omap4_sar_ram_init(); + omap4_mpuss_early_init(); omap4_pm_init_early(); omap44xx_voltagedomains_init(); omap44xx_powerdomains_init(); @@ -718,6 +720,7 @@ void __init omap5_init_early(void) omap4_pm_init_early(); omap2_prcm_base_init(); omap5xxx_check_revision(); + omap4_sar_ram_init(); omap54xx_voltagedomains_init(); omap54xx_powerdomains_init(); omap54xx_clockdomains_init(); diff --git a/arch/arm/mach-omap2/mcbsp.c b/arch/arm/mach-omap2/mcbsp.c index b4ac3af11..fc04be74e 100644 --- a/arch/arm/mach-omap2/mcbsp.c +++ b/arch/arm/mach-omap2/mcbsp.c @@ -34,18 +34,24 @@ #include "cm3xxx.h" #include "cm-regbits-34xx.h" -static struct clk *mcbsp_iclks[5]; - -static int omap3_enable_st_clock(unsigned int id, bool enable) +static int omap3_mcbsp_force_ick_on(struct clk *clk, bool force_on) { - /* - * Sidetone uses McBSP ICLK - which must not idle when sidetones - * are enabled or sidetones start sounding ugly. - */ - if (enable) - return omap2_clk_deny_idle(mcbsp_iclks[id]); + if (!clk) + return 0; + + if (force_on) + return omap2_clk_deny_idle(clk); else - return omap2_clk_allow_idle(mcbsp_iclks[id]); + return omap2_clk_allow_idle(clk); +} + +void __init omap3_mcbsp_init_pdata_callback( + struct omap_mcbsp_platform_data *pdata) +{ + if (!pdata) + return; + + pdata->force_ick_on = omap3_mcbsp_force_ick_on; } static int __init omap_init_mcbsp(struct omap_hwmod *oh, void *unused) @@ -55,7 +61,6 @@ static int __init omap_init_mcbsp(struct omap_hwmod *oh, void *unused) struct omap_hwmod *oh_device[2]; struct omap_mcbsp_platform_data *pdata = NULL; struct platform_device *pdev; - char clk_name[11]; sscanf(oh->name, "mcbsp%d", &id); @@ -96,9 +101,7 @@ static int __init omap_init_mcbsp(struct omap_hwmod *oh, void *unused) if (oh->dev_attr) { oh_device[1] = omap_hwmod_lookup(( (struct omap_mcbsp_dev_attr *)(oh->dev_attr))->sidetone); - pdata->enable_st_clock = omap3_enable_st_clock; - sprintf(clk_name, "mcbsp%d_ick", id); - mcbsp_iclks[id] = clk_get(NULL, clk_name); + pdata->force_ick_on = omap3_mcbsp_force_ick_on; count++; } pdev = omap_device_build_ss(name, id, oh_device, count, pdata, diff --git a/arch/arm/mach-omap2/mux34xx.c b/arch/arm/mach-omap2/mux34xx.c index be271f1d5..393e687f9 100644 --- a/arch/arm/mach-omap2/mux34xx.c +++ b/arch/arm/mach-omap2/mux34xx.c @@ -1266,7 +1266,7 @@ static struct omap_ball __initdata omap3_cus_ball[] = { #endif /* - * Signals different on CBB package comapared to superset + * Signals different on CBB package compared to superset */ #if defined(CONFIG_OMAP_MUX) && defined(CONFIG_OMAP_PACKAGE_CBB) static struct omap_mux __initdata omap3_cbb_subset[] = { @@ -1597,7 +1597,7 @@ static struct omap_ball __initdata omap3_cbb_ball[] = { #endif /* - * Signals different on 36XX CBP package comapared to 34XX CBC package + * Signals different on 36XX CBP package compared to 34XX CBC package */ #if defined(CONFIG_OMAP_MUX) && defined(CONFIG_OMAP_PACKAGE_CBP) static struct omap_mux __initdata omap36xx_cbp_subset[] = { diff --git a/arch/arm/mach-omap2/omap-headsmp.S b/arch/arm/mach-omap2/omap-headsmp.S index 6d1dffca6..fe36ce273 100644 --- a/arch/arm/mach-omap2/omap-headsmp.S +++ b/arch/arm/mach-omap2/omap-headsmp.S @@ -24,6 +24,16 @@ #define AUX_CORE_BOOT0_PA 0x48281800 #define API_HYP_ENTRY 0x102 +ENTRY(omap_secondary_startup) +#ifdef CONFIG_SMP + b secondary_startup +#else +/* Should never get here */ +again: wfi + b again +#endif +#ENDPROC(omap_secondary_startup) + /* * OMAP5 specific entry point for secondary CPU to jump from ROM * code. This routine also provides a holding flag into which @@ -39,7 +49,7 @@ wait: ldr r2, =AUX_CORE_BOOT0_PA @ read from AuxCoreBoot0 and r4, r4, #0x0f cmp r0, r4 bne wait - b secondary_startup + b omap_secondary_startup ENDPROC(omap5_secondary_startup) /* * Same as omap5_secondary_startup except we call into the ROM to @@ -59,7 +69,7 @@ wait_2: ldr r2, =AUX_CORE_BOOT0_PA @ read from AuxCoreBoot0 adr r0, hyp_boot smc #0 hyp_boot: - b secondary_startup + b omap_secondary_startup ENDPROC(omap5_secondary_hyp_startup) /* * OMAP4 specific entry point for secondary CPU to jump from ROM @@ -82,7 +92,7 @@ hold: ldr r12,=0x103 * we've been released from the wait loop,secondary_stack * should now contain the SVC stack for this core */ - b secondary_startup + b omap_secondary_startup ENDPROC(omap4_secondary_startup) ENTRY(omap4460_secondary_startup) @@ -119,5 +129,5 @@ hold_2: ldr r12,=0x103 * we've been released from the wait loop,secondary_stack * should now contain the SVC stack for this core */ - b secondary_startup + b omap_secondary_startup ENDPROC(omap4460_secondary_startup) diff --git a/arch/arm/mach-omap2/omap-hotplug.c b/arch/arm/mach-omap2/omap-hotplug.c index 593fec753..d3fb5661b 100644 --- a/arch/arm/mach-omap2/omap-hotplug.c +++ b/arch/arm/mach-omap2/omap-hotplug.c @@ -64,3 +64,9 @@ void omap4_cpu_die(unsigned int cpu) pr_debug("CPU%u: spurious wakeup call\n", cpu); } } + +/* Needed by kexec and platform_can_cpu_hotplug() */ +int omap4_cpu_kill(unsigned int cpu) +{ + return 1; +} diff --git a/arch/arm/mach-omap2/omap-mpuss-lowpower.c b/arch/arm/mach-omap2/omap-mpuss-lowpower.c index 65024af16..ad982465e 100644 --- a/arch/arm/mach-omap2/omap-mpuss-lowpower.c +++ b/arch/arm/mach-omap2/omap-mpuss-lowpower.c @@ -62,7 +62,9 @@ #include "prm44xx.h" #include "prm-regbits-44xx.h" -#ifdef CONFIG_SMP +static void __iomem *sar_base; + +#if defined(CONFIG_PM) && defined(CONFIG_SMP) struct omap4_cpu_pm_info { struct powerdomain *pwrdm; @@ -90,7 +92,6 @@ struct cpu_pm_ops { static DEFINE_PER_CPU(struct omap4_cpu_pm_info, omap4_pm_info); static struct powerdomain *mpuss_pd; -static void __iomem *sar_base; static u32 cpu_context_offset; static int default_finish_suspend(unsigned long cpu_state) @@ -366,9 +367,6 @@ int __init omap4_mpuss_init(void) return -ENODEV; } - if (cpu_is_omap44xx()) - sar_base = omap4_get_sar_ram_base(); - /* Initilaise per CPU PM information */ pm_info = &per_cpu(omap4_pm_info, 0x0); if (sar_base) { @@ -444,3 +442,26 @@ int __init omap4_mpuss_init(void) } #endif + +/* + * For kexec, we must set CPU1_WAKEUP_NS_PA_ADDR to point to + * current kernel's secondary_startup() early before + * clockdomains_init(). Otherwise clockdomain_init() can + * wake CPU1 and cause a hang. + */ +void __init omap4_mpuss_early_init(void) +{ + unsigned long startup_pa; + + if (!cpu_is_omap44xx()) + return; + + sar_base = omap4_get_sar_ram_base(); + + if (cpu_is_omap443x()) + startup_pa = virt_to_phys(omap4_secondary_startup); + else + startup_pa = virt_to_phys(omap4460_secondary_startup); + + writel_relaxed(startup_pa, sar_base + CPU1_WAKEUP_NS_PA_ADDR_OFFSET); +} diff --git a/arch/arm/mach-omap2/omap-smp.c b/arch/arm/mach-omap2/omap-smp.c index 8cd1de914..b4de3da6d 100644 --- a/arch/arm/mach-omap2/omap-smp.c +++ b/arch/arm/mach-omap2/omap-smp.c @@ -40,14 +40,35 @@ #define OMAP5_CORE_COUNT 0x2 -/* SCU base address */ -static void __iomem *scu_base; +struct omap_smp_config { + unsigned long cpu1_rstctrl_pa; + void __iomem *cpu1_rstctrl_va; + void __iomem *scu_base; + void *startup_addr; +}; + +static struct omap_smp_config cfg; + +static const struct omap_smp_config omap443x_cfg __initconst = { + .cpu1_rstctrl_pa = 0x4824380c, + .startup_addr = omap4_secondary_startup, +}; + +static const struct omap_smp_config omap446x_cfg __initconst = { + .cpu1_rstctrl_pa = 0x4824380c, + .startup_addr = omap4460_secondary_startup, +}; + +static const struct omap_smp_config omap5_cfg __initconst = { + .cpu1_rstctrl_pa = 0x48243810, + .startup_addr = omap5_secondary_startup, +}; static DEFINE_SPINLOCK(boot_lock); void __iomem *omap4_get_scu_base(void) { - return scu_base; + return cfg.scu_base; } #ifdef CONFIG_OMAP5_ERRATA_801819 @@ -93,7 +114,7 @@ static void omap4_secondary_init(unsigned int cpu) * OMAP443X GP devices- SMP bit isn't accessible. * OMAP446X GP devices - SMP bit access is enabled on both CPUs. */ - if (cpu_is_omap443x() && (omap_type() != OMAP2_DEVICE_TYPE_GP)) + if (soc_is_omap443x() && (omap_type() != OMAP2_DEVICE_TYPE_GP)) omap_secure_dispatcher(OMAP4_PPA_CPU_ACTRL_SMP_INDEX, 4, 0, 0, 0, 0, 0); @@ -179,7 +200,7 @@ static int omap4_boot_secondary(unsigned int cpu, struct task_struct *idle) * Ensure that CPU power state is set to ON to avoid CPU * powerdomain transition on wfi */ - clkdm_wakeup_nolock(cpu1_clkdm); + clkdm_deny_idle_nolock(cpu1_clkdm); pwrdm_set_next_pwrst(cpu1_pwrdm, PWRDM_POWER_ON); clkdm_allow_idle_nolock(cpu1_clkdm); @@ -222,9 +243,9 @@ static void __init omap4_smp_init_cpus(void) * Currently we can't call ioremap here because * SoC detection won't work until after init_early. */ - scu_base = OMAP2_L4_IO_ADDRESS(scu_a9_get_base()); - BUG_ON(!scu_base); - ncores = scu_get_core_count(scu_base); + cfg.scu_base = OMAP2_L4_IO_ADDRESS(scu_a9_get_base()); + BUG_ON(!cfg.scu_base); + ncores = scu_get_core_count(cfg.scu_base); } else if (cpu_id == CPU_CORTEX_A15) { ncores = OMAP5_CORE_COUNT; } @@ -242,20 +263,51 @@ static void __init omap4_smp_init_cpus(void) static void __init omap4_smp_prepare_cpus(unsigned int max_cpus) { - void *startup_addr = omap4_secondary_startup; void __iomem *base = omap_get_wakeupgen_base(); + const struct omap_smp_config *c = NULL; + + if (soc_is_omap443x()) + c = &omap443x_cfg; + else if (soc_is_omap446x()) + c = &omap446x_cfg; + else if (soc_is_dra74x() || soc_is_omap54xx()) + c = &omap5_cfg; + + if (!c) { + pr_err("%s Unknown SMP SoC?\n", __func__); + return; + } + + /* Must preserve cfg.scu_base set earlier */ + cfg.cpu1_rstctrl_pa = c->cpu1_rstctrl_pa; + cfg.startup_addr = c->startup_addr; + + if (soc_is_dra74x() || soc_is_omap54xx()) { + if ((__boot_cpu_mode & MODE_MASK) == HYP_MODE) + cfg.startup_addr = omap5_secondary_hyp_startup; + omap5_erratum_workaround_801819(); + } + + cfg.cpu1_rstctrl_va = ioremap(cfg.cpu1_rstctrl_pa, 4); + if (!cfg.cpu1_rstctrl_va) + return; /* * Initialise the SCU and wake up the secondary core using * wakeup_secondary(). */ - if (scu_base) - scu_enable(scu_base); + if (cfg.scu_base) + scu_enable(cfg.scu_base); - if (cpu_is_omap446x()) - startup_addr = omap4460_secondary_startup; - if (soc_is_dra74x() || soc_is_omap54xx()) - omap5_erratum_workaround_801819(); + /* + * Reset CPU1 before configuring, otherwise kexec will + * end up trying to use old kernel startup address. + */ + if (cfg.cpu1_rstctrl_va) { + writel_relaxed(1, cfg.cpu1_rstctrl_va); + readl_relaxed(cfg.cpu1_rstctrl_va); + writel_relaxed(0, cfg.cpu1_rstctrl_va); + } /* * Write the address of secondary startup routine into the @@ -264,19 +316,10 @@ static void __init omap4_smp_prepare_cpus(unsigned int max_cpus) * A barrier is added to ensure that write buffer is drained */ if (omap_secure_apis_support()) - omap_auxcoreboot_addr(virt_to_phys(startup_addr)); + omap_auxcoreboot_addr(virt_to_phys(cfg.startup_addr)); else - /* - * If the boot CPU is in HYP mode then start secondary - * CPU in HYP mode as well. - */ - if ((__boot_cpu_mode & MODE_MASK) == HYP_MODE) - writel_relaxed(virt_to_phys(omap5_secondary_hyp_startup), - base + OMAP_AUX_CORE_BOOT_1); - else - writel_relaxed(virt_to_phys(omap5_secondary_startup), - base + OMAP_AUX_CORE_BOOT_1); - + writel_relaxed(virt_to_phys(cfg.startup_addr), + base + OMAP_AUX_CORE_BOOT_1); } const struct smp_operations omap4_smp_ops __initconst = { @@ -286,5 +329,6 @@ const struct smp_operations omap4_smp_ops __initconst = { .smp_boot_secondary = omap4_boot_secondary, #ifdef CONFIG_HOTPLUG_CPU .cpu_die = omap4_cpu_die, + .cpu_kill = omap4_cpu_kill, #endif }; diff --git a/arch/arm/mach-omap2/omap4-common.c b/arch/arm/mach-omap2/omap4-common.c index 949696b6f..cf65ab8bb 100644 --- a/arch/arm/mach-omap2/omap4-common.c +++ b/arch/arm/mach-omap2/omap4-common.c @@ -61,7 +61,7 @@ static phys_addr_t dram_sync_paddr; static u32 dram_sync_size; /* - * The OMAP4 bus structure contains asynchrnous bridges which can buffer + * The OMAP4 bus structure contains asynchronous bridges which can buffer * data writes from the MPU. These asynchronous bridges can be found on * paths between the MPU to EMIF, and the MPU to L3 interconnects. * @@ -266,10 +266,11 @@ void __iomem *omap4_get_sar_ram_base(void) } /* - * SAR RAM used to save and restore the HW - * context in low power modes + * SAR RAM used to save and restore the HW context in low power modes. + * Note that we need to initialize this very early for kexec. See + * omap4_mpuss_early_init(). */ -static int __init omap4_sar_ram_init(void) +void __init omap4_sar_ram_init(void) { unsigned long sar_base; @@ -282,16 +283,13 @@ static int __init omap4_sar_ram_init(void) else if (soc_is_omap54xx()) sar_base = OMAP54XX_SAR_RAM_BASE; else - return -ENOMEM; + return; /* Static mapping, never released */ sar_ram_base = ioremap(sar_base, SZ_16K); if (WARN_ON(!sar_ram_base)) - return -ENOMEM; - - return 0; + return; } -omap_early_initcall(omap4_sar_ram_init); static const struct of_device_id intc_match[] = { { .compatible = "ti,omap4-wugen-mpu", }, diff --git a/arch/arm/mach-omap2/omap_device.c b/arch/arm/mach-omap2/omap_device.c index f7ff3b9da..e920dd83e 100644 --- a/arch/arm/mach-omap2/omap_device.c +++ b/arch/arm/mach-omap2/omap_device.c @@ -63,7 +63,22 @@ static void _add_clkdev(struct omap_device *od, const char *clk_alias, return; } - rc = clk_add_alias(clk_alias, dev_name(&od->pdev->dev), clk_name, NULL); + r = clk_get_sys(NULL, clk_name); + + if (IS_ERR(r) && of_have_populated_dt()) { + struct of_phandle_args clkspec; + + clkspec.np = of_find_node_by_name(NULL, clk_name); + + r = of_clk_get_from_provider(&clkspec); + + rc = clk_register_clkdev(r, clk_alias, + dev_name(&od->pdev->dev)); + } else { + rc = clk_add_alias(clk_alias, dev_name(&od->pdev->dev), + clk_name, NULL); + } + if (rc) { if (rc == -ENODEV || rc == -ENOMEM) dev_err(&od->pdev->dev, @@ -194,7 +209,7 @@ static int _omap_device_notifier_call(struct notifier_block *nb, int err; switch (event) { - case BUS_NOTIFY_DEL_DEVICE: + case BUS_NOTIFY_REMOVED_DEVICE: if (pdev->archdata.od) omap_device_delete(pdev->archdata.od); break; @@ -268,7 +283,7 @@ static int _omap_device_idle_hwmods(struct omap_device *od) * function returns a value different than the value the caller got * the last time it called this function. * - * If any hwmods exist for the omap_device assoiated with @pdev, + * If any hwmods exist for the omap_device associated with @pdev, * return the context loss counter for that hwmod, otherwise return * zero. */ diff --git a/arch/arm/mach-omap2/omap_hwmod.c b/arch/arm/mach-omap2/omap_hwmod.c index 83cb52775..1052b2969 100644 --- a/arch/arm/mach-omap2/omap_hwmod.c +++ b/arch/arm/mach-omap2/omap_hwmod.c @@ -178,6 +178,11 @@ */ #define OMAP4_RST_CTRL_ST_OFFSET 4 +/* + * Maximum length for module clock handle names + */ +#define MOD_CLK_MAX_NAME_LEN 32 + /** * struct omap_hwmod_soc_ops - fn ptrs for some SoC-specific operations * @enable_module: function to enable a module (via MODULEMODE) @@ -200,6 +205,7 @@ struct omap_hwmod_soc_ops { int (*init_clkdm)(struct omap_hwmod *oh); void (*update_context_lost)(struct omap_hwmod *oh); int (*get_context_lost)(struct omap_hwmod *oh); + int (*disable_direct_prcm)(struct omap_hwmod *oh); }; /* soc_ops: adapts the omap_hwmod code to the currently-booted SoC */ @@ -776,17 +782,35 @@ static int _del_initiator_dep(struct omap_hwmod *oh, struct omap_hwmod *init_oh) * @oh: struct omap_hwmod * * * Called from _init_clocks(). Populates the @oh _clk (main - * functional clock pointer) if a main_clk is present. Returns 0 on - * success or -EINVAL on error. + * functional clock pointer) if a clock matching the hwmod name is found, + * or a main_clk is present. Returns 0 on success or -EINVAL on error. */ static int _init_main_clk(struct omap_hwmod *oh) { int ret = 0; + char name[MOD_CLK_MAX_NAME_LEN]; + struct clk *clk; - if (!oh->main_clk) - return 0; + /* +7 magic comes from '_mod_ck' suffix */ + if (strlen(oh->name) + 7 > MOD_CLK_MAX_NAME_LEN) + pr_warn("%s: warning: cropping name for %s\n", __func__, + oh->name); + + strncpy(name, oh->name, MOD_CLK_MAX_NAME_LEN - 7); + strcat(name, "_mod_ck"); + + clk = clk_get(NULL, name); + if (!IS_ERR(clk)) { + oh->_clk = clk; + soc_ops.disable_direct_prcm(oh); + oh->main_clk = kstrdup(name, GFP_KERNEL); + } else { + if (!oh->main_clk) + return 0; + + oh->_clk = clk_get(NULL, oh->main_clk); + } - oh->_clk = clk_get(NULL, oh->main_clk); if (IS_ERR(oh->_clk)) { pr_warn("omap_hwmod: %s: cannot clk_get main_clk %s\n", oh->name, oh->main_clk); @@ -1029,6 +1053,10 @@ static int _omap4_wait_target_disable(struct omap_hwmod *oh) if (oh->flags & HWMOD_NO_IDLEST) return 0; + if (!oh->prcm.omap4.clkctrl_offs && + !(oh->prcm.omap4.flags & HWMOD_OMAP4_ZERO_CLKCTRL_OFFSET)) + return 0; + return omap_cm_wait_module_idle(oh->clkdm->prcm_partition, oh->clkdm->cm_inst, oh->prcm.omap4.clkctrl_offs, 0); @@ -1678,7 +1706,6 @@ static int _deassert_hardreset(struct omap_hwmod *oh, const char *name) { struct omap_hwmod_rst_info ohri; int ret = -EINVAL; - int hwsup = 0; if (!oh) return -EINVAL; @@ -1696,7 +1723,7 @@ static int _deassert_hardreset(struct omap_hwmod *oh, const char *name) * might not be completed. The clockdomain can be set * in HW_AUTO only when the module become ready. */ - hwsup = clkdm_in_hwsup(oh->clkdm); + clkdm_deny_idle(oh->clkdm); ret = clkdm_hwmod_enable(oh->clkdm, oh); if (ret) { WARN(1, "omap_hwmod: %s: could not enable clockdomain %s: %d\n", @@ -1723,8 +1750,7 @@ static int _deassert_hardreset(struct omap_hwmod *oh, const char *name) * Set the clockdomain to HW_AUTO, assuming that the * previous state was HW_AUTO. */ - if (hwsup) - clkdm_allow_idle(oh->clkdm); + clkdm_allow_idle(oh->clkdm); clkdm_hwmod_disable(oh->clkdm, oh); } @@ -2078,7 +2104,6 @@ static int _enable_preprogram(struct omap_hwmod *oh) static int _enable(struct omap_hwmod *oh) { int r; - int hwsup = 0; pr_debug("omap_hwmod: %s: enabling\n", oh->name); @@ -2138,8 +2163,7 @@ static int _enable(struct omap_hwmod *oh) * completely the module. The clockdomain can be set * in HW_AUTO only when the module become ready. */ - hwsup = clkdm_in_hwsup(oh->clkdm) && - !clkdm_missing_idle_reporting(oh->clkdm); + clkdm_deny_idle(oh->clkdm); r = clkdm_hwmod_enable(oh->clkdm, oh); if (r) { WARN(1, "omap_hwmod: %s: could not enable clockdomain %s: %d\n", @@ -2159,14 +2183,10 @@ static int _enable(struct omap_hwmod *oh) r = (soc_ops.wait_target_ready) ? soc_ops.wait_target_ready(oh) : -EINVAL; - if (!r) { - /* - * Set the clockdomain to HW_AUTO only if the target is ready, - * assuming that the previous state was HW_AUTO - */ - if (oh->clkdm && hwsup) - clkdm_allow_idle(oh->clkdm); + if (oh->clkdm) + clkdm_allow_idle(oh->clkdm); + if (!r) { oh->_state = _HWMOD_STATE_ENABLED; /* Access the sysconfig only if the target is ready */ @@ -2220,6 +2240,9 @@ static int _idle(struct omap_hwmod *oh) _idle_sysc(oh); _del_initiator_dep(oh, mpu_oh); + if (oh->clkdm) + clkdm_deny_idle(oh->clkdm); + if (oh->flags & HWMOD_BLOCK_WFI) cpu_idle_poll_ctrl(false); if (soc_ops.disable_module) @@ -2232,8 +2255,10 @@ static int _idle(struct omap_hwmod *oh) * transition to complete properly. */ _disable_clocks(oh); - if (oh->clkdm) + if (oh->clkdm) { + clkdm_allow_idle(oh->clkdm); clkdm_hwmod_disable(oh->clkdm, oh); + } /* Mux pins for device idle if populated */ if (oh->mux && oh->mux->pads_dynamic) { @@ -2950,6 +2975,10 @@ static int _omap4_wait_target_ready(struct omap_hwmod *oh) if (!_find_mpu_rt_port(oh)) return 0; + if (!oh->prcm.omap4.clkctrl_offs && + !(oh->prcm.omap4.flags & HWMOD_OMAP4_ZERO_CLKCTRL_OFFSET)) + return 0; + /* XXX check module SIDLEMODE, hardreset status */ return omap_cm_wait_module_ready(oh->clkdm->prcm_partition, @@ -3091,6 +3120,25 @@ static int _omap4_is_hardreset_asserted(struct omap_hwmod *oh, } /** + * _omap4_disable_direct_prcm - disable direct PRCM control for hwmod + * @oh: struct omap_hwmod * to disable control for + * + * Disables direct PRCM clkctrl done by hwmod core. Instead, the hwmod + * will be using its main_clk to enable/disable the module. Returns + * 0 if successful. + */ +static int _omap4_disable_direct_prcm(struct omap_hwmod *oh) +{ + if (!oh) + return -EINVAL; + + oh->prcm.omap4.clkctrl_offs = 0; + oh->prcm.omap4.modulemode = 0; + + return 0; +} + +/** * _am33xx_deassert_hardreset - call AM33XX PRM hardreset fn with hwmod args * @oh: struct omap_hwmod * to deassert hardreset * @ohri: hardreset line data @@ -3913,6 +3961,7 @@ void __init omap_hwmod_init(void) soc_ops.init_clkdm = _init_clkdm; soc_ops.update_context_lost = _omap4_update_context_lost; soc_ops.get_context_lost = _omap4_get_context_lost; + soc_ops.disable_direct_prcm = _omap4_disable_direct_prcm; } else if (cpu_is_ti814x() || cpu_is_ti816x() || soc_is_am33xx() || soc_is_am43xx()) { soc_ops.enable_module = _omap4_enable_module; @@ -3922,6 +3971,7 @@ void __init omap_hwmod_init(void) soc_ops.deassert_hardreset = _am33xx_deassert_hardreset; soc_ops.is_hardreset_asserted = _omap4_is_hardreset_asserted; soc_ops.init_clkdm = _init_clkdm; + soc_ops.disable_direct_prcm = _omap4_disable_direct_prcm; } else { WARN(1, "omap_hwmod: unknown SoC type\n"); } diff --git a/arch/arm/mach-omap2/omap_hwmod.h b/arch/arm/mach-omap2/omap_hwmod.h index 4041bad79..78904017f 100644 --- a/arch/arm/mach-omap2/omap_hwmod.h +++ b/arch/arm/mach-omap2/omap_hwmod.h @@ -443,8 +443,12 @@ struct omap_hwmod_omap2_prcm { * HWMOD_OMAP4_NO_CONTEXT_LOSS_BIT: Some IP blocks don't have a PRCM * module-level context loss register associated with them; this * flag bit should be set in those cases + * HWMOD_OMAP4_ZERO_CLKCTRL_OFFSET: Some IP blocks have a valid CLKCTRL + * offset of zero; this flag bit should be set in those cases to + * distinguish from hwmods that have no clkctrl offset. */ #define HWMOD_OMAP4_NO_CONTEXT_LOSS_BIT (1 << 0) +#define HWMOD_OMAP4_ZERO_CLKCTRL_OFFSET (1 << 1) /** * struct omap_hwmod_omap4_prcm - OMAP4-specific PRCM data diff --git a/arch/arm/mach-omap2/omap_hwmod_33xx_43xx_common_data.h b/arch/arm/mach-omap2/omap_hwmod_33xx_43xx_common_data.h index 7f737965f..d3e61d1a0 100644 --- a/arch/arm/mach-omap2/omap_hwmod_33xx_43xx_common_data.h +++ b/arch/arm/mach-omap2/omap_hwmod_33xx_43xx_common_data.h @@ -36,17 +36,8 @@ extern struct omap_hwmod_ocp_if am33xx_l4_per__gpio3; extern struct omap_hwmod_ocp_if am33xx_cpgmac0__mdio; extern struct omap_hwmod_ocp_if am33xx_l4_ls__elm; extern struct omap_hwmod_ocp_if am33xx_l4_ls__epwmss0; -extern struct omap_hwmod_ocp_if am33xx_epwmss0__ecap0; -extern struct omap_hwmod_ocp_if am33xx_epwmss0__eqep0; -extern struct omap_hwmod_ocp_if am33xx_epwmss0__ehrpwm0; extern struct omap_hwmod_ocp_if am33xx_l4_ls__epwmss1; -extern struct omap_hwmod_ocp_if am33xx_epwmss1__ecap1; -extern struct omap_hwmod_ocp_if am33xx_epwmss1__eqep1; -extern struct omap_hwmod_ocp_if am33xx_epwmss1__ehrpwm1; extern struct omap_hwmod_ocp_if am33xx_l4_ls__epwmss2; -extern struct omap_hwmod_ocp_if am33xx_epwmss2__ecap2; -extern struct omap_hwmod_ocp_if am33xx_epwmss2__eqep2; -extern struct omap_hwmod_ocp_if am33xx_epwmss2__ehrpwm2; extern struct omap_hwmod_ocp_if am33xx_l3_s__gpmc; extern struct omap_hwmod_ocp_if am33xx_l4_per__i2c2; extern struct omap_hwmod_ocp_if am33xx_l4_per__i2c3; @@ -98,17 +89,8 @@ extern struct omap_hwmod am33xx_dcan0_hwmod; extern struct omap_hwmod am33xx_dcan1_hwmod; extern struct omap_hwmod am33xx_elm_hwmod; extern struct omap_hwmod am33xx_epwmss0_hwmod; -extern struct omap_hwmod am33xx_ecap0_hwmod; -extern struct omap_hwmod am33xx_eqep0_hwmod; -extern struct omap_hwmod am33xx_ehrpwm0_hwmod; extern struct omap_hwmod am33xx_epwmss1_hwmod; -extern struct omap_hwmod am33xx_ecap1_hwmod; -extern struct omap_hwmod am33xx_eqep1_hwmod; -extern struct omap_hwmod am33xx_ehrpwm1_hwmod; extern struct omap_hwmod am33xx_epwmss2_hwmod; -extern struct omap_hwmod am33xx_ecap2_hwmod; -extern struct omap_hwmod am33xx_eqep2_hwmod; -extern struct omap_hwmod am33xx_ehrpwm2_hwmod; extern struct omap_hwmod am33xx_gpio1_hwmod; extern struct omap_hwmod am33xx_gpio2_hwmod; extern struct omap_hwmod am33xx_gpio3_hwmod; diff --git a/arch/arm/mach-omap2/omap_hwmod_33xx_43xx_interconnect_data.c b/arch/arm/mach-omap2/omap_hwmod_33xx_43xx_interconnect_data.c index 1c210cb2b..10dff2f00 100644 --- a/arch/arm/mach-omap2/omap_hwmod_33xx_43xx_interconnect_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_33xx_43xx_interconnect_data.c @@ -176,28 +176,6 @@ struct omap_hwmod_ocp_if am33xx_l4_ls__epwmss0 = { .user = OCP_USER_MPU, }; -struct omap_hwmod_ocp_if am33xx_epwmss0__ecap0 = { - .master = &am33xx_epwmss0_hwmod, - .slave = &am33xx_ecap0_hwmod, - .clk = "l4ls_gclk", - .user = OCP_USER_MPU, -}; - -struct omap_hwmod_ocp_if am33xx_epwmss0__eqep0 = { - .master = &am33xx_epwmss0_hwmod, - .slave = &am33xx_eqep0_hwmod, - .clk = "l4ls_gclk", - .user = OCP_USER_MPU, -}; - -struct omap_hwmod_ocp_if am33xx_epwmss0__ehrpwm0 = { - .master = &am33xx_epwmss0_hwmod, - .slave = &am33xx_ehrpwm0_hwmod, - .clk = "l4ls_gclk", - .user = OCP_USER_MPU, -}; - - static struct omap_hwmod_addr_space am33xx_epwmss1_addr_space[] = { { .pa_start = 0x48302000, @@ -215,27 +193,6 @@ struct omap_hwmod_ocp_if am33xx_l4_ls__epwmss1 = { .user = OCP_USER_MPU, }; -struct omap_hwmod_ocp_if am33xx_epwmss1__ecap1 = { - .master = &am33xx_epwmss1_hwmod, - .slave = &am33xx_ecap1_hwmod, - .clk = "l4ls_gclk", - .user = OCP_USER_MPU, -}; - -struct omap_hwmod_ocp_if am33xx_epwmss1__eqep1 = { - .master = &am33xx_epwmss1_hwmod, - .slave = &am33xx_eqep1_hwmod, - .clk = "l4ls_gclk", - .user = OCP_USER_MPU, -}; - -struct omap_hwmod_ocp_if am33xx_epwmss1__ehrpwm1 = { - .master = &am33xx_epwmss1_hwmod, - .slave = &am33xx_ehrpwm1_hwmod, - .clk = "l4ls_gclk", - .user = OCP_USER_MPU, -}; - static struct omap_hwmod_addr_space am33xx_epwmss2_addr_space[] = { { .pa_start = 0x48304000, @@ -253,27 +210,6 @@ struct omap_hwmod_ocp_if am33xx_l4_ls__epwmss2 = { .user = OCP_USER_MPU, }; -struct omap_hwmod_ocp_if am33xx_epwmss2__ecap2 = { - .master = &am33xx_epwmss2_hwmod, - .slave = &am33xx_ecap2_hwmod, - .clk = "l4ls_gclk", - .user = OCP_USER_MPU, -}; - -struct omap_hwmod_ocp_if am33xx_epwmss2__eqep2 = { - .master = &am33xx_epwmss2_hwmod, - .slave = &am33xx_eqep2_hwmod, - .clk = "l4ls_gclk", - .user = OCP_USER_MPU, -}; - -struct omap_hwmod_ocp_if am33xx_epwmss2__ehrpwm2 = { - .master = &am33xx_epwmss2_hwmod, - .slave = &am33xx_ehrpwm2_hwmod, - .clk = "l4ls_gclk", - .user = OCP_USER_MPU, -}; - /* l3s cfg -> gpmc */ struct omap_hwmod_ocp_if am33xx_l3_s__gpmc = { .master = &am33xx_l3_s_hwmod, diff --git a/arch/arm/mach-omap2/omap_hwmod_33xx_43xx_ipblock_data.c b/arch/arm/mach-omap2/omap_hwmod_33xx_43xx_ipblock_data.c index 3a350f887..e2d84aa7f 100644 --- a/arch/arm/mach-omap2/omap_hwmod_33xx_43xx_ipblock_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_33xx_43xx_ipblock_data.c @@ -29,6 +29,7 @@ #define CLKCTRL(oh, clkctrl) ((oh).prcm.omap4.clkctrl_offs = (clkctrl)) #define RSTCTRL(oh, rstctrl) ((oh).prcm.omap4.rstctrl_offs = (rstctrl)) #define RSTST(oh, rstst) ((oh).prcm.omap4.rstst_offs = (rstst)) +#define PRCM_FLAGS(oh, flag) ((oh).prcm.omap4.flags = (flag)) /* * 'l3' class @@ -449,18 +450,6 @@ struct omap_hwmod_class am33xx_epwmss_hwmod_class = { .sysc = &am33xx_epwmss_sysc, }; -static struct omap_hwmod_class am33xx_ecap_hwmod_class = { - .name = "ecap", -}; - -static struct omap_hwmod_class am33xx_eqep_hwmod_class = { - .name = "eqep", -}; - -struct omap_hwmod_class am33xx_ehrpwm_hwmod_class = { - .name = "ehrpwm", -}; - /* epwmss0 */ struct omap_hwmod am33xx_epwmss0_hwmod = { .name = "epwmss0", @@ -474,30 +463,6 @@ struct omap_hwmod am33xx_epwmss0_hwmod = { }, }; -/* ecap0 */ -struct omap_hwmod am33xx_ecap0_hwmod = { - .name = "ecap0", - .class = &am33xx_ecap_hwmod_class, - .clkdm_name = "l4ls_clkdm", - .main_clk = "l4ls_gclk", -}; - -/* eqep0 */ -struct omap_hwmod am33xx_eqep0_hwmod = { - .name = "eqep0", - .class = &am33xx_eqep_hwmod_class, - .clkdm_name = "l4ls_clkdm", - .main_clk = "l4ls_gclk", -}; - -/* ehrpwm0 */ -struct omap_hwmod am33xx_ehrpwm0_hwmod = { - .name = "ehrpwm0", - .class = &am33xx_ehrpwm_hwmod_class, - .clkdm_name = "l4ls_clkdm", - .main_clk = "l4ls_gclk", -}; - /* epwmss1 */ struct omap_hwmod am33xx_epwmss1_hwmod = { .name = "epwmss1", @@ -511,30 +476,6 @@ struct omap_hwmod am33xx_epwmss1_hwmod = { }, }; -/* ecap1 */ -struct omap_hwmod am33xx_ecap1_hwmod = { - .name = "ecap1", - .class = &am33xx_ecap_hwmod_class, - .clkdm_name = "l4ls_clkdm", - .main_clk = "l4ls_gclk", -}; - -/* eqep1 */ -struct omap_hwmod am33xx_eqep1_hwmod = { - .name = "eqep1", - .class = &am33xx_eqep_hwmod_class, - .clkdm_name = "l4ls_clkdm", - .main_clk = "l4ls_gclk", -}; - -/* ehrpwm1 */ -struct omap_hwmod am33xx_ehrpwm1_hwmod = { - .name = "ehrpwm1", - .class = &am33xx_ehrpwm_hwmod_class, - .clkdm_name = "l4ls_clkdm", - .main_clk = "l4ls_gclk", -}; - /* epwmss2 */ struct omap_hwmod am33xx_epwmss2_hwmod = { .name = "epwmss2", @@ -548,30 +489,6 @@ struct omap_hwmod am33xx_epwmss2_hwmod = { }, }; -/* ecap2 */ -struct omap_hwmod am33xx_ecap2_hwmod = { - .name = "ecap2", - .class = &am33xx_ecap_hwmod_class, - .clkdm_name = "l4ls_clkdm", - .main_clk = "l4ls_gclk", -}; - -/* eqep2 */ -struct omap_hwmod am33xx_eqep2_hwmod = { - .name = "eqep2", - .class = &am33xx_eqep_hwmod_class, - .clkdm_name = "l4ls_clkdm", - .main_clk = "l4ls_gclk", -}; - -/* ehrpwm2 */ -struct omap_hwmod am33xx_ehrpwm2_hwmod = { - .name = "ehrpwm2", - .class = &am33xx_ehrpwm_hwmod_class, - .clkdm_name = "l4ls_clkdm", - .main_clk = "l4ls_gclk", -}; - /* * 'gpio' class: for gpio 0,1,2,3 */ @@ -1380,6 +1297,7 @@ static void omap_hwmod_am33xx_clkctrl(void) CLKCTRL(am33xx_i2c1_hwmod, AM33XX_CM_WKUP_I2C0_CLKCTRL_OFFSET); CLKCTRL(am33xx_wd_timer1_hwmod, AM33XX_CM_WKUP_WDT1_CLKCTRL_OFFSET); CLKCTRL(am33xx_rtc_hwmod, AM33XX_CM_RTC_RTC_CLKCTRL_OFFSET); + PRCM_FLAGS(am33xx_rtc_hwmod, HWMOD_OMAP4_ZERO_CLKCTRL_OFFSET); CLKCTRL(am33xx_mmc2_hwmod, AM33XX_CM_PER_MMC2_CLKCTRL_OFFSET); CLKCTRL(am33xx_gpmc_hwmod, AM33XX_CM_PER_GPMC_CLKCTRL_OFFSET); CLKCTRL(am33xx_l4_ls_hwmod, AM33XX_CM_PER_L4LS_CLKCTRL_OFFSET); diff --git a/arch/arm/mach-omap2/omap_hwmod_33xx_data.c b/arch/arm/mach-omap2/omap_hwmod_33xx_data.c index cc0791d91..e1c2025d6 100644 --- a/arch/arm/mach-omap2/omap_hwmod_33xx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_33xx_data.c @@ -593,17 +593,8 @@ static struct omap_hwmod_ocp_if *am33xx_hwmod_ocp_ifs[] __initdata = { &am33xx_l4_ls__spinlock, &am33xx_l4_ls__elm, &am33xx_l4_ls__epwmss0, - &am33xx_epwmss0__ecap0, - &am33xx_epwmss0__eqep0, - &am33xx_epwmss0__ehrpwm0, &am33xx_l4_ls__epwmss1, - &am33xx_epwmss1__ecap1, - &am33xx_epwmss1__eqep1, - &am33xx_epwmss1__ehrpwm1, &am33xx_l4_ls__epwmss2, - &am33xx_epwmss2__ecap2, - &am33xx_epwmss2__eqep2, - &am33xx_epwmss2__ehrpwm2, &am33xx_l3_s__gpmc, &am33xx_l3_main__lcdc, &am33xx_l4_ls__mcspi0, diff --git a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c index caf15c8e0..1cc4a6f39 100644 --- a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c @@ -1334,16 +1334,8 @@ static struct omap_hwmod omap3xxx_mcbsp2_sidetone_hwmod = { .name = "mcbsp2_sidetone", .class = &omap3xxx_mcbsp_sidetone_hwmod_class, .mpu_irqs = omap3xxx_mcbsp2_sidetone_irqs, - .main_clk = "mcbsp2_fck", - .prcm = { - .omap2 = { - .prcm_reg_id = 1, - .module_bit = OMAP3430_EN_MCBSP2_SHIFT, - .module_offs = OMAP3430_PER_MOD, - .idlest_reg_id = 1, - .idlest_idle_bit = OMAP3430_ST_MCBSP2_SHIFT, - }, - }, + .main_clk = "mcbsp2_ick", + .flags = HWMOD_NO_IDLEST, }; /* mcbsp3_sidetone */ @@ -1356,16 +1348,8 @@ static struct omap_hwmod omap3xxx_mcbsp3_sidetone_hwmod = { .name = "mcbsp3_sidetone", .class = &omap3xxx_mcbsp_sidetone_hwmod_class, .mpu_irqs = omap3xxx_mcbsp3_sidetone_irqs, - .main_clk = "mcbsp3_fck", - .prcm = { - .omap2 = { - .prcm_reg_id = 1, - .module_bit = OMAP3430_EN_MCBSP3_SHIFT, - .module_offs = OMAP3430_PER_MOD, - .idlest_reg_id = 1, - .idlest_idle_bit = OMAP3430_ST_MCBSP3_SHIFT, - }, - }, + .main_clk = "mcbsp3_ick", + .flags = HWMOD_NO_IDLEST, }; /* SR common */ diff --git a/arch/arm/mach-omap2/omap_hwmod_43xx_data.c b/arch/arm/mach-omap2/omap_hwmod_43xx_data.c index 97fd39920..61f2f301d 100644 --- a/arch/arm/mach-omap2/omap_hwmod_43xx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_43xx_data.c @@ -202,13 +202,6 @@ static struct omap_hwmod am43xx_epwmss3_hwmod = { }, }; -static struct omap_hwmod am43xx_ehrpwm3_hwmod = { - .name = "ehrpwm3", - .class = &am33xx_ehrpwm_hwmod_class, - .clkdm_name = "l4ls_clkdm", - .main_clk = "l4ls_gclk", -}; - static struct omap_hwmod am43xx_epwmss4_hwmod = { .name = "epwmss4", .class = &am33xx_epwmss_hwmod_class, @@ -222,13 +215,6 @@ static struct omap_hwmod am43xx_epwmss4_hwmod = { }, }; -static struct omap_hwmod am43xx_ehrpwm4_hwmod = { - .name = "ehrpwm4", - .class = &am33xx_ehrpwm_hwmod_class, - .clkdm_name = "l4ls_clkdm", - .main_clk = "l4ls_gclk", -}; - static struct omap_hwmod am43xx_epwmss5_hwmod = { .name = "epwmss5", .class = &am33xx_epwmss_hwmod_class, @@ -242,13 +228,6 @@ static struct omap_hwmod am43xx_epwmss5_hwmod = { }, }; -static struct omap_hwmod am43xx_ehrpwm5_hwmod = { - .name = "ehrpwm5", - .class = &am33xx_ehrpwm_hwmod_class, - .clkdm_name = "l4ls_clkdm", - .main_clk = "l4ls_gclk", -}; - static struct omap_hwmod am43xx_spi2_hwmod = { .name = "spi2", .class = &am33xx_spi_hwmod_class, @@ -744,13 +723,6 @@ static struct omap_hwmod_ocp_if am43xx_l4_ls__epwmss3 = { .user = OCP_USER_MPU, }; -static struct omap_hwmod_ocp_if am43xx_epwmss3__ehrpwm3 = { - .master = &am43xx_epwmss3_hwmod, - .slave = &am43xx_ehrpwm3_hwmod, - .clk = "l4ls_gclk", - .user = OCP_USER_MPU, -}; - static struct omap_hwmod_ocp_if am43xx_l4_ls__epwmss4 = { .master = &am33xx_l4_ls_hwmod, .slave = &am43xx_epwmss4_hwmod, @@ -758,13 +730,6 @@ static struct omap_hwmod_ocp_if am43xx_l4_ls__epwmss4 = { .user = OCP_USER_MPU, }; -static struct omap_hwmod_ocp_if am43xx_epwmss4__ehrpwm4 = { - .master = &am43xx_epwmss4_hwmod, - .slave = &am43xx_ehrpwm4_hwmod, - .clk = "l4ls_gclk", - .user = OCP_USER_MPU, -}; - static struct omap_hwmod_ocp_if am43xx_l4_ls__epwmss5 = { .master = &am33xx_l4_ls_hwmod, .slave = &am43xx_epwmss5_hwmod, @@ -772,13 +737,6 @@ static struct omap_hwmod_ocp_if am43xx_l4_ls__epwmss5 = { .user = OCP_USER_MPU, }; -static struct omap_hwmod_ocp_if am43xx_epwmss5__ehrpwm5 = { - .master = &am43xx_epwmss5_hwmod, - .slave = &am43xx_ehrpwm5_hwmod, - .clk = "l4ls_gclk", - .user = OCP_USER_MPU, -}; - static struct omap_hwmod_ocp_if am43xx_l4_ls__mcspi2 = { .master = &am33xx_l4_ls_hwmod, .slave = &am43xx_spi2_hwmod, @@ -919,11 +877,8 @@ static struct omap_hwmod_ocp_if *am43xx_hwmod_ocp_ifs[] __initdata = { &am43xx_l4_ls__timer10, &am43xx_l4_ls__timer11, &am43xx_l4_ls__epwmss3, - &am43xx_epwmss3__ehrpwm3, &am43xx_l4_ls__epwmss4, - &am43xx_epwmss4__ehrpwm4, &am43xx_l4_ls__epwmss5, - &am43xx_epwmss5__ehrpwm5, &am43xx_l4_ls__mcspi2, &am43xx_l4_ls__mcspi3, &am43xx_l4_ls__mcspi4, @@ -982,17 +937,8 @@ static struct omap_hwmod_ocp_if *am43xx_hwmod_ocp_ifs[] __initdata = { &am33xx_l4_ls__spinlock, &am33xx_l4_ls__elm, &am33xx_l4_ls__epwmss0, - &am33xx_epwmss0__ecap0, - &am33xx_epwmss0__eqep0, - &am33xx_epwmss0__ehrpwm0, &am33xx_l4_ls__epwmss1, - &am33xx_epwmss1__ecap1, - &am33xx_epwmss1__eqep1, - &am33xx_epwmss1__ehrpwm1, &am33xx_l4_ls__epwmss2, - &am33xx_epwmss2__ecap2, - &am33xx_epwmss2__eqep2, - &am33xx_epwmss2__ehrpwm2, &am33xx_l3_s__gpmc, &am33xx_l4_ls__mcspi0, &am33xx_l4_ls__mcspi1, diff --git a/arch/arm/mach-omap2/omap_hwmod_7xx_data.c b/arch/arm/mach-omap2/omap_hwmod_7xx_data.c index d0e7e5259..1ab7096af 100644 --- a/arch/arm/mach-omap2/omap_hwmod_7xx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_7xx_data.c @@ -2905,58 +2905,27 @@ static struct omap_hwmod_ocp_if dra7xx_l3_main_1__tptc1 = { .user = OCP_USER_MPU, }; -static struct omap_hwmod_addr_space dra7xx_dss_addrs[] = { - { - .name = "family", - .pa_start = 0x58000000, - .pa_end = 0x5800007f, - .flags = ADDR_TYPE_RT - }, -}; - /* l3_main_1 -> dss */ static struct omap_hwmod_ocp_if dra7xx_l3_main_1__dss = { .master = &dra7xx_l3_main_1_hwmod, .slave = &dra7xx_dss_hwmod, .clk = "l3_iclk_div", - .addr = dra7xx_dss_addrs, .user = OCP_USER_MPU | OCP_USER_SDMA, }; -static struct omap_hwmod_addr_space dra7xx_dss_dispc_addrs[] = { - { - .name = "dispc", - .pa_start = 0x58001000, - .pa_end = 0x58001fff, - .flags = ADDR_TYPE_RT - }, -}; - /* l3_main_1 -> dispc */ static struct omap_hwmod_ocp_if dra7xx_l3_main_1__dispc = { .master = &dra7xx_l3_main_1_hwmod, .slave = &dra7xx_dss_dispc_hwmod, .clk = "l3_iclk_div", - .addr = dra7xx_dss_dispc_addrs, .user = OCP_USER_MPU | OCP_USER_SDMA, }; -static struct omap_hwmod_addr_space dra7xx_dss_hdmi_addrs[] = { - { - .name = "hdmi_wp", - .pa_start = 0x58040000, - .pa_end = 0x580400ff, - .flags = ADDR_TYPE_RT - }, - { } -}; - /* l3_main_1 -> dispc */ static struct omap_hwmod_ocp_if dra7xx_l3_main_1__hdmi = { .master = &dra7xx_l3_main_1_hwmod, .slave = &dra7xx_dss_hdmi_hwmod, .clk = "l3_iclk_div", - .addr = dra7xx_dss_hdmi_addrs, .user = OCP_USER_MPU | OCP_USER_SDMA, }; @@ -3410,21 +3379,11 @@ static struct omap_hwmod_ocp_if dra7xx_l4_cfg__pciess2 = { .user = OCP_USER_MPU | OCP_USER_SDMA, }; -static struct omap_hwmod_addr_space dra7xx_qspi_addrs[] = { - { - .pa_start = 0x4b300000, - .pa_end = 0x4b30007f, - .flags = ADDR_TYPE_RT - }, - { } -}; - /* l3_main_1 -> qspi */ static struct omap_hwmod_ocp_if dra7xx_l3_main_1__qspi = { .master = &dra7xx_l3_main_1_hwmod, .slave = &dra7xx_qspi_hwmod, .clk = "l3_iclk_div", - .addr = dra7xx_qspi_addrs, .user = OCP_USER_MPU | OCP_USER_SDMA, }; diff --git a/arch/arm/mach-omap2/omap_hwmod_81xx_data.c b/arch/arm/mach-omap2/omap_hwmod_81xx_data.c index df8327713..b82b77cff 100644 --- a/arch/arm/mach-omap2/omap_hwmod_81xx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_81xx_data.c @@ -243,7 +243,7 @@ static struct omap_hwmod_class ti81xx_rtc_hwmod_class = { .sysc = &ti81xx_rtc_sysc, }; -struct omap_hwmod ti81xx_rtc_hwmod = { +static struct omap_hwmod ti81xx_rtc_hwmod = { .name = "rtc", .class = &ti81xx_rtc_hwmod_class, .clkdm_name = "alwon_l3s_clkdm", diff --git a/arch/arm/mach-omap2/pdata-quirks.c b/arch/arm/mach-omap2/pdata-quirks.c index 6571ad959..05e20aaf6 100644 --- a/arch/arm/mach-omap2/pdata-quirks.c +++ b/arch/arm/mach-omap2/pdata-quirks.c @@ -26,6 +26,7 @@ #include <linux/platform_data/wkup_m3.h> #include <linux/platform_data/pwm_omap_dmtimer.h> #include <linux/platform_data/media/ir-rx51.h> +#include <linux/platform_data/asoc-ti-mcbsp.h> #include <plat/dmtimer.h> #include "common.h" @@ -273,8 +274,6 @@ static struct platform_device omap3_rom_rng_device = { }, }; -static struct platform_device rx51_lirc_device; - static void __init nokia_n900_legacy_init(void) { hsmmc2_internal_input_clk(); @@ -293,10 +292,7 @@ static void __init nokia_n900_legacy_init(void) pr_info("RX-51: Registering OMAP3 HWRNG device\n"); platform_device_register(&omap3_rom_rng_device); - } - - platform_device_register(&rx51_lirc_device); } static void __init omap3_tao3530_legacy_init(void) @@ -491,10 +487,6 @@ static struct pwm_omap_dmtimer_pdata pwm_dmtimer_pdata = { static struct lirc_rx51_platform_data __maybe_unused rx51_lirc_data = { .set_max_mpu_wakeup_lat = omap_pm_set_max_mpu_wakeup_lat, - .pwm_timer = 9, /* Use GPT 9 for CIR */ -#if IS_ENABLED(CONFIG_OMAP_DM_TIMER) - .dmtimer = &pwm_dmtimer_pdata, -#endif }; static struct platform_device __maybe_unused rx51_lirc_device = { @@ -505,6 +497,16 @@ static struct platform_device __maybe_unused rx51_lirc_device = { }, }; +#if IS_ENABLED(CONFIG_SND_OMAP_SOC_MCBSP) +static struct omap_mcbsp_platform_data mcbsp_pdata; +static void __init omap3_mcbsp_init(void) +{ + omap3_mcbsp_init_pdata_callback(&mcbsp_pdata); +} +#else +static void __init omap3_mcbsp_init(void) {} +#endif + /* * Few boards still need auxdata populated before we populate * the dev entries in of_platform_populate(). @@ -532,10 +534,16 @@ static struct of_dev_auxdata omap_auxdata_lookup[] __initdata = { &omap3_iommu_pdata), OF_DEV_AUXDATA("ti,omap3-hsmmc", 0x4809c000, "4809c000.mmc", &mmc_pdata[0]), OF_DEV_AUXDATA("ti,omap3-hsmmc", 0x480b4000, "480b4000.mmc", &mmc_pdata[1]), + OF_DEV_AUXDATA("nokia,n900-ir", 0, "n900-ir", &rx51_lirc_data), /* Only on am3517 */ OF_DEV_AUXDATA("ti,davinci_mdio", 0x5c030000, "davinci_mdio.0", NULL), OF_DEV_AUXDATA("ti,am3517-emac", 0x5c000000, "davinci_emac.0", &am35xx_emac_pdata), + /* McBSP modules with sidetone core */ +#if IS_ENABLED(CONFIG_SND_OMAP_SOC_MCBSP) + OF_DEV_AUXDATA("ti,omap3-mcbsp", 0x49022000, "49022000.mcbsp", &mcbsp_pdata), + OF_DEV_AUXDATA("ti,omap3-mcbsp", 0x49024000, "49024000.mcbsp", &mcbsp_pdata), +#endif #endif #ifdef CONFIG_SOC_AM33XX OF_DEV_AUXDATA("ti,am3352-wkup-m3", 0x44d00000, "44d00000.wkup_m3", @@ -608,6 +616,8 @@ void __init pdata_quirks_init(const struct of_device_id *omap_dt_match_table) of_machine_is_compatible("ti,omap3")) omap_sdrc_init(NULL, NULL); + if (of_machine_is_compatible("ti,omap3")) + omap3_mcbsp_init(); pdata_quirks_check(auxdata_quirks); of_platform_populate(NULL, omap_dt_match_table, omap_auxdata_lookup, NULL); diff --git a/arch/arm/mach-omap2/pm.c b/arch/arm/mach-omap2/pm.c index 2f7b11da7..678d2a31d 100644 --- a/arch/arm/mach-omap2/pm.c +++ b/arch/arm/mach-omap2/pm.c @@ -110,13 +110,7 @@ static void __init omap2_init_processor_devices(void) int __init omap_pm_clkdms_setup(struct clockdomain *clkdm, void *unused) { - /* XXX The usecount test is racy */ - if ((clkdm->flags & CLKDM_CAN_ENABLE_AUTO) && - !(clkdm->flags & CLKDM_MISSING_IDLE_REPORTING)) - clkdm_allow_idle(clkdm); - else if (clkdm->flags & CLKDM_CAN_FORCE_SLEEP && - clkdm->usecount == 0) - clkdm_sleep(clkdm); + clkdm_allow_idle(clkdm); return 0; } diff --git a/arch/arm/mach-omap2/powerdomain.c b/arch/arm/mach-omap2/powerdomain.c index daf2753de..76eb6ec5f 100644 --- a/arch/arm/mach-omap2/powerdomain.c +++ b/arch/arm/mach-omap2/powerdomain.c @@ -223,7 +223,6 @@ static int _pwrdm_post_transition_cb(struct powerdomain *pwrdm, void *unused) * @pwrdm: struct powerdomain * to operate on * @curr_pwrst: current power state of @pwrdm * @pwrst: power state to switch to - * @hwsup: ptr to a bool to return whether the clkdm is hardware-supervised * * Determine whether the powerdomain needs to be turned on before * attempting to switch power states. Called by @@ -234,8 +233,7 @@ static int _pwrdm_post_transition_cb(struct powerdomain *pwrdm, void *unused) * "Types of sleep_switch" comment above). */ static u8 _pwrdm_save_clkdm_state_and_activate(struct powerdomain *pwrdm, - u8 curr_pwrst, u8 pwrst, - bool *hwsup) + u8 curr_pwrst, u8 pwrst) { u8 sleep_switch; @@ -245,8 +243,7 @@ static u8 _pwrdm_save_clkdm_state_and_activate(struct powerdomain *pwrdm, arch_pwrdm->pwrdm_set_lowpwrstchange) { sleep_switch = LOWPOWERSTATE_SWITCH; } else { - *hwsup = clkdm_in_hwsup(pwrdm->pwrdm_clkdms[0]); - clkdm_wakeup_nolock(pwrdm->pwrdm_clkdms[0]); + clkdm_deny_idle_nolock(pwrdm->pwrdm_clkdms[0]); sleep_switch = FORCEWAKEUP_SWITCH; } } else { @@ -260,7 +257,6 @@ static u8 _pwrdm_save_clkdm_state_and_activate(struct powerdomain *pwrdm, * _pwrdm_restore_clkdm_state - restore the clkdm hwsup state after pwrst change * @pwrdm: struct powerdomain * to operate on * @sleep_switch: return value from _pwrdm_save_clkdm_state_and_activate() - * @hwsup: should @pwrdm's first clockdomain be set to hardware-supervised mode? * * Restore the clockdomain state perturbed by * _pwrdm_save_clkdm_state_and_activate(), and call the power state @@ -271,14 +267,11 @@ static u8 _pwrdm_save_clkdm_state_and_activate(struct powerdomain *pwrdm, * software-supervised sleep. No return value. */ static void _pwrdm_restore_clkdm_state(struct powerdomain *pwrdm, - u8 sleep_switch, bool hwsup) + u8 sleep_switch) { switch (sleep_switch) { case FORCEWAKEUP_SWITCH: - if (hwsup) - clkdm_allow_idle_nolock(pwrdm->pwrdm_clkdms[0]); - else - clkdm_sleep_nolock(pwrdm->pwrdm_clkdms[0]); + clkdm_allow_idle_nolock(pwrdm->pwrdm_clkdms[0]); break; case LOWPOWERSTATE_SWITCH: if (pwrdm->flags & PWRDM_HAS_LOWPOWERSTATECHANGE && @@ -1093,7 +1086,6 @@ int omap_set_pwrdm_state(struct powerdomain *pwrdm, u8 pwrst) u8 next_pwrst, sleep_switch; int curr_pwrst; int ret = 0; - bool hwsup = false; if (!pwrdm || IS_ERR(pwrdm)) return -EINVAL; @@ -1117,14 +1109,14 @@ int omap_set_pwrdm_state(struct powerdomain *pwrdm, u8 pwrst) goto osps_out; sleep_switch = _pwrdm_save_clkdm_state_and_activate(pwrdm, curr_pwrst, - pwrst, &hwsup); + pwrst); ret = pwrdm_set_next_pwrst(pwrdm, pwrst); if (ret) pr_err("%s: unable to set power state of powerdomain: %s\n", __func__, pwrdm->name); - _pwrdm_restore_clkdm_state(pwrdm, sleep_switch, hwsup); + _pwrdm_restore_clkdm_state(pwrdm, sleep_switch); osps_out: pwrdm_unlock(pwrdm); diff --git a/arch/arm/mach-omap2/prm33xx.h b/arch/arm/mach-omap2/prm33xx.h index 2bc4ec52b..66302c6ab 100644 --- a/arch/arm/mach-omap2/prm33xx.h +++ b/arch/arm/mach-omap2/prm33xx.h @@ -52,8 +52,6 @@ /* PRM.PER_PRM register offsets */ #define AM33XX_RM_PER_RSTCTRL_OFFSET 0x0000 #define AM33XX_RM_PER_RSTCTRL AM33XX_PRM_REGADDR(AM33XX_PRM_PER_MOD, 0x0000) -#define AM33XX_RM_PER_RSTST_OFFSET 0x0004 -#define AM33XX_RM_PER_RSTST AM33XX_PRM_REGADDR(AM33XX_PRM_PER_MOD, 0x0004) #define AM33XX_PM_PER_PWRSTST_OFFSET 0x0008 #define AM33XX_PM_PER_PWRSTST AM33XX_PRM_REGADDR(AM33XX_PRM_PER_MOD, 0x0008) #define AM33XX_PM_PER_PWRSTCTRL_OFFSET 0x000c diff --git a/arch/arm/mach-omap2/sdrc.h b/arch/arm/mach-omap2/sdrc.h index 645a2a46b..f11500612 100644 --- a/arch/arm/mach-omap2/sdrc.h +++ b/arch/arm/mach-omap2/sdrc.h @@ -175,8 +175,8 @@ u32 omap2xxx_sdrc_reprogram(u32 level, u32 force); * don't adjust it down as your clock period increases the refresh interval * will not be met. Setting all parameters for complete worst case may work, * but may cut memory performance by 2x. Due to errata the DLLs need to be - * unlocked and their value needs run time calibration. A dynamic call is - * need for that as no single right value exists acorss production samples. + * unlocked and their value needs run time calibration. A dynamic call is + * need for that as no single right value exists across production samples. * * Only the FULL speed values are given. Current code is such that rate * changes must be made at DPLLoutx2. The actual value adjustment for low diff --git a/arch/arm/mach-omap2/timer.c b/arch/arm/mach-omap2/timer.c index cb9497a20..5e2e2218a 100644 --- a/arch/arm/mach-omap2/timer.c +++ b/arch/arm/mach-omap2/timer.c @@ -289,6 +289,8 @@ static int __init omap_dm_timer_init_one(struct omap_dm_timer *timer, if (!timer->io_base) return -ENXIO; + omap_hwmod_setup_one(oh_name); + /* After the dmtimer is using hwmod these clocks won't be needed */ timer->fclk = clk_get(NULL, omap_hwmod_get_main_clk(oh)); if (IS_ERR(timer->fclk)) @@ -303,7 +305,6 @@ static int __init omap_dm_timer_init_one(struct omap_dm_timer *timer, clk_put(src); - omap_hwmod_setup_one(oh_name); omap_hwmod_enable(oh); __omap_dm_timer_init_regs(timer); diff --git a/arch/arm/mach-orion5x/Kconfig b/arch/arm/mach-orion5x/Kconfig index a2af15822..89bb0fc79 100644 --- a/arch/arm/mach-orion5x/Kconfig +++ b/arch/arm/mach-orion5x/Kconfig @@ -1,9 +1,9 @@ menuconfig ARCH_ORION5X bool "Marvell Orion" depends on MMU && ARCH_MULTI_V5 - select ARCH_REQUIRE_GPIOLIB select CPU_FEROCEON select GENERIC_CLOCKEVENTS + select GPIOLIB select MVEBU_MBUS select PCI select PLAT_ORION_LEGACY diff --git a/arch/arm/mach-orion5x/board-dt.c b/arch/arm/mach-orion5x/board-dt.c index 6f4c2c4ae..3d36f1d95 100644 --- a/arch/arm/mach-orion5x/board-dt.c +++ b/arch/arm/mach-orion5x/board-dt.c @@ -63,8 +63,7 @@ static void __init orion5x_dt_init(void) if (of_machine_is_compatible("maxtor,shared-storage-2")) mss2_init(); - of_platform_populate(NULL, of_default_bus_match_table, - orion5x_auxdata_lookup, NULL); + of_platform_default_populate(NULL, orion5x_auxdata_lookup, NULL); } static const char *orion5x_dt_compat[] = { diff --git a/arch/arm/mach-orion5x/irq.c b/arch/arm/mach-orion5x/irq.c index de980ef9c..ac4af2283 100644 --- a/arch/arm/mach-orion5x/irq.c +++ b/arch/arm/mach-orion5x/irq.c @@ -26,7 +26,7 @@ static int __initdata gpio0_irqs[4] = { IRQ_ORION5X_GPIO_24_31, }; -asmlinkage void +static asmlinkage void __exception_irq_entry orion5x_legacy_handle_irq(struct pt_regs *regs) { u32 stat; diff --git a/arch/arm/mach-orion5x/ts78xx-setup.c b/arch/arm/mach-orion5x/ts78xx-setup.c index 3a58a5d4a..8d597267d 100644 --- a/arch/arm/mach-orion5x/ts78xx-setup.c +++ b/arch/arm/mach-orion5x/ts78xx-setup.c @@ -16,7 +16,7 @@ #include <linux/platform_device.h> #include <linux/mv643xx_eth.h> #include <linux/ata_platform.h> -#include <linux/m48t86.h> +#include <linux/platform_data/rtc-m48t86.h> #include <linux/mtd/nand.h> #include <linux/mtd/partitions.h> #include <linux/timeriomem-rng.h> diff --git a/arch/arm/mach-oxnas/Kconfig b/arch/arm/mach-oxnas/Kconfig index 4fff3c766..29100beb2 100644 --- a/arch/arm/mach-oxnas/Kconfig +++ b/arch/arm/mach-oxnas/Kconfig @@ -1,7 +1,7 @@ menuconfig ARCH_OXNAS bool "Oxford Semiconductor OXNAS Family SoCs" - select ARCH_REQUIRE_GPIOLIB select ARCH_HAS_RESET_CONTROLLER + select GPIOLIB select PINCTRL depends on ARCH_MULTI_V5 help @@ -11,11 +11,13 @@ if ARCH_OXNAS config MACH_OX810SE bool "Support OX810SE Based Products" - select ARM_TIMER_SP804 + select ARCH_HAS_RESET_CONTROLLER select COMMON_CLK_OXNAS select CPU_ARM926T select MFD_SYSCON + select OXNAS_RPS_TIMER select PINCTRL_OXNAS + select RESET_CONTROLLER select RESET_OXNAS select VERSATILE_FPGA_IRQ help diff --git a/arch/arm/mach-picoxcell/Kconfig b/arch/arm/mach-picoxcell/Kconfig index aef92ba0e..1c8f70152 100644 --- a/arch/arm/mach-picoxcell/Kconfig +++ b/arch/arm/mach-picoxcell/Kconfig @@ -1,8 +1,8 @@ config ARCH_PICOXCELL bool "Picochip PicoXcell" depends on ARCH_MULTI_V6 - select ARCH_REQUIRE_GPIOLIB select ARM_VIC select DW_APB_TIMER_OF + select GPIOLIB select HAVE_TCM select NO_IOPORT_MAP diff --git a/arch/arm/mach-picoxcell/common.c b/arch/arm/mach-picoxcell/common.c index ec79fea82..4e3d6d5c8 100644 --- a/arch/arm/mach-picoxcell/common.c +++ b/arch/arm/mach-picoxcell/common.c @@ -10,7 +10,6 @@ #include <linux/delay.h> #include <linux/of.h> #include <linux/of_address.h> -#include <linux/of_platform.h> #include <linux/reboot.h> #include <asm/mach/arch.h> @@ -54,7 +53,6 @@ static void __init picoxcell_map_io(void) static void __init picoxcell_init_machine(void) { - of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL); picoxcell_setup_restart(); } diff --git a/arch/arm/mach-prima2/Kconfig b/arch/arm/mach-prima2/Kconfig index 0cf442618..85e874a97 100644 --- a/arch/arm/mach-prima2/Kconfig +++ b/arch/arm/mach-prima2/Kconfig @@ -3,8 +3,8 @@ menuconfig ARCH_SIRF depends on ARCH_MULTI_V7 select ARCH_HAS_RESET_CONTROLLER select RESET_CONTROLLER - select ARCH_REQUIRE_GPIOLIB select GENERIC_IRQ_CHIP + select GPIOLIB select NO_IOPORT_MAP select REGMAP select PINCTRL @@ -28,6 +28,7 @@ config ARCH_ATLAS7 default y select ARM_GIC select CPU_V7 + select ATLAS7_TIMER select HAVE_ARM_SCU if SMP select HAVE_SMP help @@ -38,6 +39,7 @@ config ARCH_PRIMA2 default y select SIRF_IRQ select ZONE_DMA + select PRIMA2_TIMER help Support for CSR SiRFSoC ARM Cortex A9 Platform diff --git a/arch/arm/mach-pxa/cm-x270.c b/arch/arm/mach-pxa/cm-x270.c index fa5f51d63..be4a66166 100644 --- a/arch/arm/mach-pxa/cm-x270.c +++ b/arch/arm/mach-pxa/cm-x270.c @@ -14,7 +14,7 @@ #include <linux/gpio.h> #include <linux/delay.h> -#include <linux/rtc-v3020.h> +#include <linux/platform_data/rtc-v3020.h> #include <video/mbxfb.h> #include <linux/spi/spi.h> diff --git a/arch/arm/mach-pxa/cm-x300.c b/arch/arm/mach-pxa/cm-x300.c index 5f5ac7c8f..868448d2c 100644 --- a/arch/arm/mach-pxa/cm-x300.c +++ b/arch/arm/mach-pxa/cm-x300.c @@ -25,7 +25,7 @@ #include <linux/gpio.h> #include <linux/dm9000.h> #include <linux/leds.h> -#include <linux/rtc-v3020.h> +#include <linux/platform_data/rtc-v3020.h> #include <linux/pwm.h> #include <linux/pwm_backlight.h> diff --git a/arch/arm/mach-pxa/corgi.c b/arch/arm/mach-pxa/corgi.c index dc109dc3a..10bfdb169 100644 --- a/arch/arm/mach-pxa/corgi.c +++ b/arch/arm/mach-pxa/corgi.c @@ -13,6 +13,7 @@ */ #include <linux/kernel.h> +#include <linux/module.h> /* symbol_get ; symbol_put */ #include <linux/init.h> #include <linux/platform_device.h> #include <linux/major.h> diff --git a/arch/arm/mach-pxa/em-x270.c b/arch/arm/mach-pxa/em-x270.c index 6e0268dee..03354c21e 100644 --- a/arch/arm/mach-pxa/em-x270.c +++ b/arch/arm/mach-pxa/em-x270.c @@ -14,7 +14,7 @@ #include <linux/delay.h> #include <linux/dm9000.h> -#include <linux/rtc-v3020.h> +#include <linux/platform_data/rtc-v3020.h> #include <linux/mtd/nand.h> #include <linux/mtd/partitions.h> #include <linux/mtd/physmap.h> diff --git a/arch/arm/mach-pxa/lubbock.c b/arch/arm/mach-pxa/lubbock.c index 7245f3359..d6159f8ef 100644 --- a/arch/arm/mach-pxa/lubbock.c +++ b/arch/arm/mach-pxa/lubbock.c @@ -137,6 +137,18 @@ static struct pxa2xx_udc_mach_info udc_info __initdata = { // no D+ pullup; lubbock can't connect/disconnect in software }; +static void lubbock_init_pcmcia(void) +{ + struct clk *clk; + + /* Add an alias for the SA1111 PCMCIA clock */ + clk = clk_get_sys("pxa2xx-pcmcia", NULL); + if (!IS_ERR(clk)) { + clkdev_create(clk, NULL, "1800"); + clk_put(clk); + } +} + static struct resource sa1111_resources[] = { [0] = { .start = 0x10000000, @@ -467,6 +479,8 @@ static void __init lubbock_init(void) pxa_set_btuart_info(NULL); pxa_set_stuart_info(NULL); + lubbock_init_pcmcia(); + clk_add_alias("SA1111_CLK", NULL, "GPIO11_CLK", NULL); pxa_set_udc_info(&udc_info); pxa_set_fb_info(NULL, &sharp_lm8v31); diff --git a/arch/arm/mach-pxa/spitz.c b/arch/arm/mach-pxa/spitz.c index bd7cd8b6a..2c150bfc0 100644 --- a/arch/arm/mach-pxa/spitz.c +++ b/arch/arm/mach-pxa/spitz.c @@ -13,6 +13,7 @@ */ #include <linux/kernel.h> +#include <linux/module.h> /* symbol_get ; symbol_put */ #include <linux/platform_device.h> #include <linux/delay.h> #include <linux/gpio_keys.h> @@ -464,7 +465,7 @@ static struct gpio_led spitz_gpio_leds[] = { }, { .name = "spitz:green:hddactivity", - .default_trigger = "ide-disk", + .default_trigger = "disk-activity", .gpio = SPITZ_GPIO_LED_GREEN, }, }; diff --git a/arch/arm/mach-qcom/Kconfig b/arch/arm/mach-qcom/Kconfig index 73494500b..46ed10a80 100644 --- a/arch/arm/mach-qcom/Kconfig +++ b/arch/arm/mach-qcom/Kconfig @@ -23,4 +23,8 @@ config ARCH_MSM8974 bool "Enable support for MSM8974" select HAVE_ARM_ARCH_TIMER +config ARCH_MDM9615 + bool "Enable support for MDM9615" + select CLKSRC_QCOM + endif diff --git a/arch/arm/mach-qcom/board.c b/arch/arm/mach-qcom/board.c index 6d8bbf7d3..d8060dfd1 100644 --- a/arch/arm/mach-qcom/board.c +++ b/arch/arm/mach-qcom/board.c @@ -22,6 +22,7 @@ static const char * const qcom_dt_match[] __initconst = { "qcom,ipq8064", "qcom,msm8660-surf", "qcom,msm8960-cdp", + "qcom,mdm9615", NULL }; diff --git a/arch/arm/mach-realview/Makefile b/arch/arm/mach-realview/Makefile index dae8d86ef..404882130 100644 --- a/arch/arm/mach-realview/Makefile +++ b/arch/arm/mach-realview/Makefile @@ -1,8 +1,7 @@ # # Makefile for the linux kernel. # -ccflags-$(CONFIG_ARCH_MULTIPLATFORM) := -I$(srctree)/$(src)/include \ - -I$(srctree)/arch/arm/plat-versatile/include +ccflags-$(CONFIG_ARCH_MULTIPLATFORM) := -I$(srctree)/arch/arm/plat-versatile/include obj-y := core.o obj-$(CONFIG_REALVIEW_DT) += realview-dt.o diff --git a/arch/arm/mach-rockchip/Kconfig b/arch/arm/mach-rockchip/Kconfig index cef42fd88..9ad84cd01 100644 --- a/arch/arm/mach-rockchip/Kconfig +++ b/arch/arm/mach-rockchip/Kconfig @@ -4,10 +4,10 @@ config ARCH_ROCKCHIP select PINCTRL select PINCTRL_ROCKCHIP select ARCH_HAS_RESET_CONTROLLER - select ARCH_REQUIRE_GPIOLIB select ARM_AMBA select ARM_GIC select CACHE_L2X0 + select GPIOLIB select HAVE_ARM_ARCH_TIMER select HAVE_ARM_SCU if SMP select HAVE_ARM_TWD if SMP diff --git a/arch/arm/mach-rockchip/rockchip.c b/arch/arm/mach-rockchip/rockchip.c index beb71da5d..a7ab9ec14 100644 --- a/arch/arm/mach-rockchip/rockchip.c +++ b/arch/arm/mach-rockchip/rockchip.c @@ -73,7 +73,6 @@ static void __init rockchip_timer_init(void) static void __init rockchip_dt_init(void) { rockchip_suspend_init(); - of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL); } static const char * const rockchip_board_dt_compat[] = { diff --git a/arch/arm/mach-s3c24xx/Kconfig b/arch/arm/mach-s3c24xx/Kconfig index b91aee406..4b1690acb 100644 --- a/arch/arm/mach-s3c24xx/Kconfig +++ b/arch/arm/mach-s3c24xx/Kconfig @@ -11,7 +11,7 @@ if ARCH_S3C24XX config PLAT_S3C24XX def_bool y - select ARCH_REQUIRE_GPIOLIB + select GPIOLIB select NO_IOPORT_MAP select S3C_DEV_NAND select IRQ_DOMAIN diff --git a/arch/arm/mach-s3c24xx/include/mach/regs-gpio.h b/arch/arm/mach-s3c24xx/include/mach/regs-gpio.h index c6583cfa5..0d622f3b5 100644 --- a/arch/arm/mach-s3c24xx/include/mach/regs-gpio.h +++ b/arch/arm/mach-s3c24xx/include/mach/regs-gpio.h @@ -520,7 +520,7 @@ #define S3C24XX_EXTINT1 S3C24XX_GPIOREG2(0x8C) #define S3C24XX_EXTINT2 S3C24XX_GPIOREG2(0x90) -/* interrupt filtering conrrol for EINT16..EINT23 */ +/* interrupt filtering control for EINT16..EINT23 */ #define S3C2410_EINFLT0 S3C2410_GPIOREG(0x94) #define S3C2410_EINFLT1 S3C2410_GPIOREG(0x98) #define S3C2410_EINFLT2 S3C2410_GPIOREG(0x9C) diff --git a/arch/arm/mach-s3c24xx/iotiming-s3c2410.c b/arch/arm/mach-s3c24xx/iotiming-s3c2410.c index 4cd13ab64..65e5f9cb6 100644 --- a/arch/arm/mach-s3c24xx/iotiming-s3c2410.c +++ b/arch/arm/mach-s3c24xx/iotiming-s3c2410.c @@ -423,7 +423,7 @@ void s3c2410_iotiming_set(struct s3c_cpufreq_config *cfg, * @timings: The IO timing information to fill out. * * Calculate the @timings timing information from the current frequency - * information in @cfg, and the new frequency configur + * information in @cfg, and the new frequency configuration * through all the IO banks, reading the state and then updating @iot * as necessary. * diff --git a/arch/arm/mach-s3c24xx/mach-n30.c b/arch/arm/mach-s3c24xx/mach-n30.c index 171c1f11f..070a0d071 100644 --- a/arch/arm/mach-s3c24xx/mach-n30.c +++ b/arch/arm/mach-s3c24xx/mach-n30.c @@ -522,7 +522,7 @@ static void __init n30_hwinit(void) * * The pull ups for H6/H7 are enabled on N30 but not on the * N35/PiN. I suppose is useful for a budget model of the N30 - * with no bluetooh. It doesn't hurt to have the pull ups + * with no bluetooth. It doesn't hurt to have the pull ups * enabled on the N35, so leave them enabled for all models. */ __raw_writel(0x0028aaaa, S3C2410_GPHCON); diff --git a/arch/arm/mach-s3c24xx/mach-osiris-dvs.c b/arch/arm/mach-s3c24xx/mach-osiris-dvs.c index ce2db235d..262ab0744 100644 --- a/arch/arm/mach-s3c24xx/mach-osiris-dvs.c +++ b/arch/arm/mach-s3c24xx/mach-osiris-dvs.c @@ -143,7 +143,7 @@ static int osiris_dvs_remove(struct platform_device *pdev) return 0; } -/* the CONFIG_PM block is so small, it isn't worth actaully compiling it +/* the CONFIG_PM block is so small, it isn't worth actually compiling it * out if the configuration isn't set. */ static int osiris_dvs_suspend(struct device *dev) diff --git a/arch/arm/mach-s3c24xx/mach-s3c2416-dt.c b/arch/arm/mach-s3c24xx/mach-s3c2416-dt.c index 5f028ff84..c83c07657 100644 --- a/arch/arm/mach-s3c24xx/mach-s3c2416-dt.c +++ b/arch/arm/mach-s3c24xx/mach-s3c2416-dt.c @@ -17,7 +17,6 @@ #include <linux/clocksource.h> #include <linux/irqchip.h> -#include <linux/of_platform.h> #include <linux/serial_s3c.h> #include <asm/mach/arch.h> @@ -35,7 +34,6 @@ static void __init s3c2416_dt_map_io(void) static void __init s3c2416_dt_machine_init(void) { - of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL); s3c_pm_init(); } diff --git a/arch/arm/mach-s3c24xx/pll-s3c2410.c b/arch/arm/mach-s3c24xx/pll-s3c2410.c index 5e37d3685..7ee4924a5 100644 --- a/arch/arm/mach-s3c24xx/pll-s3c2410.c +++ b/arch/arm/mach-s3c24xx/pll-s3c2410.c @@ -32,11 +32,12 @@ #include <plat/cpu.h> #include <plat/cpu-freq-core.h> +/* This array should be sorted in ascending order of the frequencies */ static struct cpufreq_frequency_table pll_vals_12MHz[] = { { .frequency = 34000000, .driver_data = PLLVAL(82, 2, 3), }, { .frequency = 45000000, .driver_data = PLLVAL(82, 1, 3), }, - { .frequency = 51000000, .driver_data = PLLVAL(161, 3, 3), }, { .frequency = 48000000, .driver_data = PLLVAL(120, 2, 3), }, + { .frequency = 51000000, .driver_data = PLLVAL(161, 3, 3), }, { .frequency = 56000000, .driver_data = PLLVAL(142, 2, 3), }, { .frequency = 68000000, .driver_data = PLLVAL(82, 2, 2), }, { .frequency = 79000000, .driver_data = PLLVAL(71, 1, 2), }, diff --git a/arch/arm/mach-s3c24xx/pll-s3c2440-12000000.c b/arch/arm/mach-s3c24xx/pll-s3c2440-12000000.c index b355fca6c..a3fbfed75 100644 --- a/arch/arm/mach-s3c24xx/pll-s3c2440-12000000.c +++ b/arch/arm/mach-s3c24xx/pll-s3c2440-12000000.c @@ -20,6 +20,7 @@ #include <plat/cpu.h> #include <plat/cpu-freq-core.h> +/* This array should be sorted in ascending order of the frequencies */ static struct cpufreq_frequency_table s3c2440_plls_12[] = { { .frequency = 75000000, .driver_data = PLLVAL(0x75, 3, 3), }, /* FVco 600.000000 */ { .frequency = 80000000, .driver_data = PLLVAL(0x98, 4, 3), }, /* FVco 640.000000 */ diff --git a/arch/arm/mach-s3c24xx/pll-s3c2440-16934400.c b/arch/arm/mach-s3c24xx/pll-s3c2440-16934400.c index be9a248b5..bcff89fd9 100644 --- a/arch/arm/mach-s3c24xx/pll-s3c2440-16934400.c +++ b/arch/arm/mach-s3c24xx/pll-s3c2440-16934400.c @@ -20,6 +20,7 @@ #include <plat/cpu.h> #include <plat/cpu-freq-core.h> +/* This array should be sorted in ascending order of the frequencies */ static struct cpufreq_frequency_table s3c2440_plls_169344[] = { { .frequency = 78019200, .driver_data = PLLVAL(121, 5, 3), }, /* FVco 624.153600 */ { .frequency = 84067200, .driver_data = PLLVAL(131, 5, 3), }, /* FVco 672.537600 */ diff --git a/arch/arm/mach-s3c64xx/Kconfig b/arch/arm/mach-s3c64xx/Kconfig index e5c1888fc..459214fa2 100644 --- a/arch/arm/mach-s3c64xx/Kconfig +++ b/arch/arm/mach-s3c64xx/Kconfig @@ -5,12 +5,12 @@ menuconfig ARCH_S3C64XX bool "Samsung S3C64XX" depends on ARCH_MULTI_V6 - select ARCH_REQUIRE_GPIOLIB select ARM_AMBA select ARM_VIC select CLKSRC_SAMSUNG_PWM select COMMON_CLK_SAMSUNG select GPIO_SAMSUNG if ATAGS + select GPIOLIB select HAVE_S3C2410_I2C if I2C select HAVE_S3C2410_WATCHDOG if WATCHDOG select HAVE_TCM diff --git a/arch/arm/mach-s3c64xx/common.h b/arch/arm/mach-s3c64xx/common.h index 9eb864412..4f204668f 100644 --- a/arch/arm/mach-s3c64xx/common.h +++ b/arch/arm/mach-s3c64xx/common.h @@ -24,6 +24,7 @@ void s3c64xx_init_io(struct map_desc *mach_desc, int size); void s3c64xx_restart(enum reboot_mode mode, const char *cmd); +struct device_node; void s3c64xx_clk_init(struct device_node *np, unsigned long xtal_f, unsigned long xusbxti_f, bool is_s3c6400, void __iomem *reg_base); void s3c64xx_set_xtal_freq(unsigned long freq); diff --git a/arch/arm/mach-s3c64xx/include/mach/map.h b/arch/arm/mach-s3c64xx/include/mach/map.h index f55ccb1ce..d51873e8f 100644 --- a/arch/arm/mach-s3c64xx/include/mach/map.h +++ b/arch/arm/mach-s3c64xx/include/mach/map.h @@ -99,7 +99,7 @@ #define S3C64XX_PA_USB_HSPHY (0x7C100000) -/* compatibiltiy defines. */ +/* compatibility defines. */ #define S3C_PA_TIMER S3C64XX_PA_TIMER #define S3C_PA_HSMMC0 S3C64XX_PA_HSMMC0 #define S3C_PA_HSMMC1 S3C64XX_PA_HSMMC1 diff --git a/arch/arm/mach-s3c64xx/mach-s3c64xx-dt.c b/arch/arm/mach-s3c64xx/mach-s3c64xx-dt.c index bbf74edd3..5bf9afae7 100644 --- a/arch/arm/mach-s3c64xx/mach-s3c64xx-dt.c +++ b/arch/arm/mach-s3c64xx/mach-s3c64xx-dt.c @@ -8,8 +8,6 @@ * published by the Free Software Foundation. */ -#include <linux/of_platform.h> - #include <asm/mach/arch.h> #include <asm/mach/map.h> #include <asm/system_misc.h> @@ -48,7 +46,6 @@ static void __init s3c64xx_dt_map_io(void) static void __init s3c64xx_dt_init_machine(void) { samsung_wdt_reset_of_init(); - of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL); } static void s3c64xx_dt_restart(enum reboot_mode mode, const char *cmd) diff --git a/arch/arm/mach-s3c64xx/mach-smartq.c b/arch/arm/mach-s3c64xx/mach-smartq.c index 936a63fc6..e0e1a729e 100644 --- a/arch/arm/mach-s3c64xx/mach-smartq.c +++ b/arch/arm/mach-s3c64xx/mach-smartq.c @@ -43,6 +43,7 @@ #include <plat/samsung-time.h> #include "common.h" +#include "mach-smartq.h" #include "regs-modem.h" #define UCON S3C2410_UCON_DEFAULT diff --git a/arch/arm/mach-s5pv210/Kconfig b/arch/arm/mach-s5pv210/Kconfig index 13bc9820f..4cec11cf5 100644 --- a/arch/arm/mach-s5pv210/Kconfig +++ b/arch/arm/mach-s5pv210/Kconfig @@ -11,10 +11,10 @@ config ARCH_S5PV210 bool "Samsung S5PV210/S5PC110" depends on ARCH_MULTI_V7 select ARCH_HAS_HOLES_MEMORYMODEL - select ARCH_REQUIRE_GPIOLIB select ARM_VIC select CLKSRC_SAMSUNG_PWM select COMMON_CLK_SAMSUNG + select GPIOLIB select HAVE_S3C2410_I2C if I2C select HAVE_S3C2410_WATCHDOG if WATCHDOG select HAVE_S3C_RTC if RTC_CLASS diff --git a/arch/arm/mach-s5pv210/Makefile b/arch/arm/mach-s5pv210/Makefile index 72b9e9671..fa7fb716e 100644 --- a/arch/arm/mach-s5pv210/Makefile +++ b/arch/arm/mach-s5pv210/Makefile @@ -5,7 +5,7 @@ # # Licensed under GPLv2 -ccflags-$(CONFIG_ARCH_MULTIPLATFORM) += -I$(srctree)/$(src)/include -I$(srctree)/arch/arm/plat-samsung/include +ccflags-$(CONFIG_ARCH_MULTIPLATFORM) += -I$(srctree)/arch/arm/plat-samsung/include # Core diff --git a/arch/arm/mach-sa1100/clock.c b/arch/arm/mach-sa1100/clock.c index cbf53bb9c..0db46895c 100644 --- a/arch/arm/mach-sa1100/clock.c +++ b/arch/arm/mach-sa1100/clock.c @@ -125,6 +125,8 @@ static unsigned long clk_36864_get_rate(struct clk *clk) } static struct clkops clk_36864_ops = { + .enable = clk_cpu_enable, + .disable = clk_cpu_disable, .get_rate = clk_36864_get_rate, }; @@ -140,9 +142,8 @@ static struct clk_lookup sa11xx_clkregs[] = { CLKDEV_INIT(NULL, "OSTIMER0", &clk_36864), }; -static int __init sa11xx_clk_init(void) +int __init sa11xx_clk_init(void) { clkdev_add_table(sa11xx_clkregs, ARRAY_SIZE(sa11xx_clkregs)); return 0; } -core_initcall(sa11xx_clk_init); diff --git a/arch/arm/mach-sa1100/generic.c b/arch/arm/mach-sa1100/generic.c index 345e63f4e..3e09beddb 100644 --- a/arch/arm/mach-sa1100/generic.c +++ b/arch/arm/mach-sa1100/generic.c @@ -34,6 +34,7 @@ #include <mach/hardware.h> #include <mach/irqs.h> +#include <mach/reset.h> #include "generic.h" #include <clocksource/pxa.h> @@ -95,6 +96,8 @@ static void sa1100_power_off(void) void sa11x0_restart(enum reboot_mode mode, const char *cmd) { + clear_reset_status(RESET_STATUS_ALL); + if (mode == REBOOT_SOFT) { /* Jump into ROM at address 0 */ soft_restart(0); @@ -388,6 +391,7 @@ void __init sa1100_init_irq(void) sa11x0_init_irq_nodt(IRQ_GPIO0_SC, irq_resource.start); sa1100_init_gpio(); + sa11xx_clk_init(); } /* diff --git a/arch/arm/mach-sa1100/generic.h b/arch/arm/mach-sa1100/generic.h index 0d92e119b..68199b603 100644 --- a/arch/arm/mach-sa1100/generic.h +++ b/arch/arm/mach-sa1100/generic.h @@ -44,3 +44,5 @@ int sa11x0_pm_init(void); #else static inline int sa11x0_pm_init(void) { return 0; } #endif + +int sa11xx_clk_init(void); diff --git a/arch/arm/mach-shmobile/Kconfig b/arch/arm/mach-shmobile/Kconfig index fe4ccb52f..4a48c9f5f 100644 --- a/arch/arm/mach-shmobile/Kconfig +++ b/arch/arm/mach-shmobile/Kconfig @@ -41,7 +41,7 @@ menuconfig ARCH_RENESAS select ARCH_DMA_ADDR_T_64BIT if ARM_LPAE select NO_IOPORT_MAP select PINCTRL - select ARCH_REQUIRE_GPIOLIB + select GPIOLIB select ZONE_DMA if ARM_LPAE if ARCH_RENESAS @@ -86,6 +86,10 @@ config ARCH_R8A7791 select ARCH_RCAR_GEN2 select I2C +config ARCH_R8A7792 + bool "R-Car V2H (R8A77920)" + select ARCH_RCAR_GEN2 + config ARCH_R8A7793 bool "R-Car M2-N (R8A7793)" select ARCH_RCAR_GEN2 diff --git a/arch/arm/mach-shmobile/Makefile b/arch/arm/mach-shmobile/Makefile index fc95f7bd2..3fc48b02e 100644 --- a/arch/arm/mach-shmobile/Makefile +++ b/arch/arm/mach-shmobile/Makefile @@ -13,6 +13,7 @@ obj-$(CONFIG_ARCH_R8A7778) += setup-r8a7778.o obj-$(CONFIG_ARCH_R8A7779) += setup-r8a7779.o pm-r8a7779.o obj-$(CONFIG_ARCH_R8A7790) += setup-r8a7790.o obj-$(CONFIG_ARCH_R8A7791) += setup-r8a7791.o +obj-$(CONFIG_ARCH_R8A7792) += setup-r8a7792.o obj-$(CONFIG_ARCH_R8A7793) += setup-r8a7793.o obj-$(CONFIG_ARCH_R8A7794) += setup-r8a7794.o obj-$(CONFIG_ARCH_EMEV2) += setup-emev2.o diff --git a/arch/arm/mach-shmobile/common.h b/arch/arm/mach-shmobile/common.h index 3b562d878..1a8f7b3ab 100644 --- a/arch/arm/mach-shmobile/common.h +++ b/arch/arm/mach-shmobile/common.h @@ -10,6 +10,7 @@ extern void shmobile_smp_sleep(void); extern void shmobile_smp_hook(unsigned int cpu, unsigned long fn, unsigned long arg); extern bool shmobile_smp_cpu_can_disable(unsigned int cpu); +extern bool shmobile_smp_init_fallback_ops(void); extern void shmobile_boot_scu(void); extern void shmobile_smp_scu_prepare_cpus(phys_addr_t scu_base_phys, unsigned int max_cpus); diff --git a/arch/arm/mach-shmobile/platsmp-apmu.c b/arch/arm/mach-shmobile/platsmp-apmu.c index aba75c89f..0c6bb458b 100644 --- a/arch/arm/mach-shmobile/platsmp-apmu.c +++ b/arch/arm/mach-shmobile/platsmp-apmu.c @@ -24,6 +24,7 @@ #include <asm/suspend.h> #include "common.h" #include "platsmp-apmu.h" +#include "rcar-gen2.h" static struct { void __iomem *iomem; @@ -74,6 +75,7 @@ static int __maybe_unused apmu_wrap(int cpu, int (*fn)(void __iomem *p, int cpu) return p ? fn(p, apmu_cpus[cpu].bit) : -EINVAL; } +#ifdef CONFIG_SMP static void apmu_init_cpu(struct resource *res, int cpu, int bit) { if ((cpu >= ARRAY_SIZE(apmu_cpus)) || apmu_cpus[cpu].iomem) @@ -117,18 +119,69 @@ static void apmu_parse_cfg(void (*fn)(struct resource *res, int cpu, int bit), } } -void __init shmobile_smp_apmu_prepare_cpus(unsigned int max_cpus, - struct rcar_apmu_config *apmu_config, - int num) +static const struct of_device_id apmu_ids[] = { + { .compatible = "renesas,apmu" }, + { /*sentinel*/ } +}; + +static void apmu_parse_dt(void (*fn)(struct resource *res, int cpu, int bit)) +{ + struct device_node *np_apmu, *np_cpu; + struct resource res; + int bit, index; + u32 id; + + for_each_matching_node(np_apmu, apmu_ids) { + /* only enable the cluster that includes the boot CPU */ + bool is_allowed = false; + + for (bit = 0; bit < CONFIG_NR_CPUS; bit++) { + np_cpu = of_parse_phandle(np_apmu, "cpus", bit); + if (np_cpu) { + if (!of_property_read_u32(np_cpu, "reg", &id)) { + if (id == cpu_logical_map(0)) { + is_allowed = true; + of_node_put(np_cpu); + break; + } + + } + of_node_put(np_cpu); + } + } + if (!is_allowed) + continue; + + for (bit = 0; bit < CONFIG_NR_CPUS; bit++) { + np_cpu = of_parse_phandle(np_apmu, "cpus", bit); + if (np_cpu) { + if (!of_property_read_u32(np_cpu, "reg", &id)) { + index = get_logical_index(id); + if ((index >= 0) && + !of_address_to_resource(np_apmu, + 0, &res)) + fn(&res, index, bit); + } + of_node_put(np_cpu); + } + } + } +} + +static void __init shmobile_smp_apmu_setup_boot(void) { /* install boot code shared by all CPUs */ shmobile_boot_fn = virt_to_phys(shmobile_smp_boot); +} - /* perform per-cpu setup */ +void __init shmobile_smp_apmu_prepare_cpus(unsigned int max_cpus, + struct rcar_apmu_config *apmu_config, + int num) +{ + shmobile_smp_apmu_setup_boot(); apmu_parse_cfg(apmu_init_cpu, apmu_config, num); } -#ifdef CONFIG_SMP int shmobile_smp_apmu_boot_secondary(unsigned int cpu, struct task_struct *idle) { /* For this particular CPU register boot vector */ @@ -136,7 +189,38 @@ int shmobile_smp_apmu_boot_secondary(unsigned int cpu, struct task_struct *idle) return apmu_wrap(cpu, apmu_power_on); } + +static void __init shmobile_smp_apmu_prepare_cpus_dt(unsigned int max_cpus) +{ + shmobile_smp_apmu_setup_boot(); + apmu_parse_dt(apmu_init_cpu); + rcar_gen2_pm_init(); +} + +static int shmobile_smp_apmu_boot_secondary_md21(unsigned int cpu, + struct task_struct *idle) +{ + /* Error out when hardware debug mode is enabled */ + if (rcar_gen2_read_mode_pins() & BIT(21)) { + pr_warn("Unable to boot CPU%u when MD21 is set\n", cpu); + return -ENOTSUPP; + } + + return shmobile_smp_apmu_boot_secondary(cpu, idle); +} + +static struct smp_operations apmu_smp_ops __initdata = { + .smp_prepare_cpus = shmobile_smp_apmu_prepare_cpus_dt, + .smp_boot_secondary = shmobile_smp_apmu_boot_secondary_md21, +#ifdef CONFIG_HOTPLUG_CPU + .cpu_can_disable = shmobile_smp_cpu_can_disable, + .cpu_die = shmobile_smp_apmu_cpu_die, + .cpu_kill = shmobile_smp_apmu_cpu_kill, #endif +}; + +CPU_METHOD_OF_DECLARE(shmobile_smp_apmu, "renesas,apmu", &apmu_smp_ops); +#endif /* CONFIG_SMP */ #if defined(CONFIG_HOTPLUG_CPU) || defined(CONFIG_SUSPEND) /* nicked from arch/arm/mach-exynos/hotplug.c */ diff --git a/arch/arm/mach-shmobile/platsmp.c b/arch/arm/mach-shmobile/platsmp.c index b23378f3d..02e21bceb 100644 --- a/arch/arm/mach-shmobile/platsmp.c +++ b/arch/arm/mach-shmobile/platsmp.c @@ -36,3 +36,12 @@ bool shmobile_smp_cpu_can_disable(unsigned int cpu) return true; /* Hotplug of any CPU is supported */ } #endif + +bool __init shmobile_smp_init_fallback_ops(void) +{ + /* fallback on PSCI/smp_ops if no other DT based method is detected */ + if (!IS_ENABLED(CONFIG_SMP)) + return false; + + return platform_can_secondary_boot() ? true : false; +} diff --git a/arch/arm/mach-shmobile/pm-r8a7779.c b/arch/arm/mach-shmobile/pm-r8a7779.c index 4174cbcbc..5c9a93f5e 100644 --- a/arch/arm/mach-shmobile/pm-r8a7779.c +++ b/arch/arm/mach-shmobile/pm-r8a7779.c @@ -23,11 +23,7 @@ static void __init r8a7779_sysc_init(void) { - void __iomem *base = rcar_sysc_init(0xffd85000); - - /* enable all interrupt sources, but do not use interrupt handler */ - iowrite32(0x0131000e, base + SYSCIER); - iowrite32(0, base + SYSCIMR); + rcar_sysc_init(0xffd85000, 0x0131000e); } #else /* CONFIG_PM || CONFIG_SMP */ diff --git a/arch/arm/mach-shmobile/pm-rcar-gen2.c b/arch/arm/mach-shmobile/pm-rcar-gen2.c index 691ac166a..dd9ac3668 100644 --- a/arch/arm/mach-shmobile/pm-rcar-gen2.c +++ b/arch/arm/mach-shmobile/pm-rcar-gen2.c @@ -26,8 +26,7 @@ #define CA7RESCNT 0x0044 /* On-chip RAM */ -#define MERAM 0xe8080000 -#define RAM 0xe6300000 +#define ICRAM1 0xe63c0000 /* Inter Connect RAM1 (4 KiB) */ /* SYSC */ #define SYSCIER 0x0c @@ -37,11 +36,7 @@ static void __init rcar_gen2_sysc_init(u32 syscier) { - void __iomem *base = rcar_sysc_init(0xe6180000); - - /* enable all interrupt sources, but do not use interrupt handler */ - iowrite32(syscier, base + SYSCIER); - iowrite32(0, base + SYSCIMR); + rcar_sysc_init(0xe6180000, syscier); } #else /* CONFIG_SMP */ @@ -58,7 +53,7 @@ void __init rcar_gen2_pm_init(void) struct device_node *np, *cpus; bool has_a7 = false; bool has_a15 = false; - phys_addr_t boot_vector_addr = 0; + phys_addr_t boot_vector_addr = ICRAM1; u32 syscier = 0; if (once++) @@ -75,14 +70,10 @@ void __init rcar_gen2_pm_init(void) has_a7 = true; } - if (of_machine_is_compatible("renesas,r8a7790")) { - boot_vector_addr = MERAM; + if (of_machine_is_compatible("renesas,r8a7790")) syscier = 0x013111ef; - - } else if (of_machine_is_compatible("renesas,r8a7791")) { - boot_vector_addr = RAM; + else if (of_machine_is_compatible("renesas,r8a7791")) syscier = 0x00111003; - } /* RAM for jump stub, because BAR requires 256KB aligned address */ p = ioremap_nocache(boot_vector_addr, shmobile_boot_size); diff --git a/arch/arm/mach-shmobile/pm-rmobile.c b/arch/arm/mach-shmobile/pm-rmobile.c index c0b05e9e6..45a195501 100644 --- a/arch/arm/mach-shmobile/pm-rmobile.c +++ b/arch/arm/mach-shmobile/pm-rmobile.c @@ -131,13 +131,13 @@ static void rmobile_init_pm_domain(struct rmobile_pm_domain *rmobile_pd) struct dev_power_governor *gov = rmobile_pd->gov; genpd->flags = GENPD_FLAG_PM_CLK; - pm_genpd_init(genpd, gov ? : &simple_qos_governor, false); genpd->dev_ops.active_wakeup = rmobile_pd_active_wakeup; genpd->power_off = rmobile_pd_power_down; genpd->power_on = rmobile_pd_power_up; genpd->attach_dev = cpg_mstp_attach_dev; genpd->detach_dev = cpg_mstp_detach_dev; __rmobile_pd_power_up(rmobile_pd, false); + pm_genpd_init(genpd, gov ? : &simple_qos_governor, false); } static int rmobile_pd_suspend_busy(void) diff --git a/arch/arm/mach-shmobile/regulator-quirk-rcar-gen2.c b/arch/arm/mach-shmobile/regulator-quirk-rcar-gen2.c index 62437b578..73e3adbc1 100644 --- a/arch/arm/mach-shmobile/regulator-quirk-rcar-gen2.c +++ b/arch/arm/mach-shmobile/regulator-quirk-rcar-gen2.c @@ -41,39 +41,26 @@ #define REGULATOR_IRQ_MASK BIT(2) /* IRQ2, active low */ -static void __iomem *irqc; - -static const u8 da9063_mask_regs[] = { - DA9063_REG_IRQ_MASK_A, - DA9063_REG_IRQ_MASK_B, - DA9063_REG_IRQ_MASK_C, - DA9063_REG_IRQ_MASK_D, -}; - -/* DA9210 System Control and Event Registers */ +/* start of DA9210 System Control and Event Registers */ #define DA9210_REG_MASK_A 0x54 -#define DA9210_REG_MASK_B 0x55 - -static const u8 da9210_mask_regs[] = { - DA9210_REG_MASK_A, - DA9210_REG_MASK_B, -}; - -static void da9xxx_mask_irqs(struct i2c_client *client, const u8 regs[], - unsigned int nregs) -{ - unsigned int i; - dev_info(&client->dev, "Masking %s interrupt sources\n", client->name); +static void __iomem *irqc; - for (i = 0; i < nregs; i++) { - int error = i2c_smbus_write_byte_data(client, regs[i], ~0); - if (error) { - dev_err(&client->dev, "i2c error %d\n", error); - return; - } - } -} +/* first byte sets the memory pointer, following are consecutive reg values */ +static u8 da9063_irq_clr[] = { DA9063_REG_IRQ_MASK_A, 0xff, 0xff, 0xff, 0xff }; +static u8 da9210_irq_clr[] = { DA9210_REG_MASK_A, 0xff, 0xff }; + +static struct i2c_msg da9xxx_msgs[2] = { + { + .addr = 0x58, + .len = ARRAY_SIZE(da9063_irq_clr), + .buf = da9063_irq_clr, + }, { + .addr = 0x68, + .len = ARRAY_SIZE(da9210_irq_clr), + .buf = da9210_irq_clr, + }, +}; static int regulator_quirk_notify(struct notifier_block *nb, unsigned long action, void *data) @@ -93,12 +80,15 @@ static int regulator_quirk_notify(struct notifier_block *nb, client = to_i2c_client(dev); dev_dbg(dev, "Detected %s\n", client->name); - if ((client->addr == 0x58 && !strcmp(client->name, "da9063"))) - da9xxx_mask_irqs(client, da9063_mask_regs, - ARRAY_SIZE(da9063_mask_regs)); - else if (client->addr == 0x68 && !strcmp(client->name, "da9210")) - da9xxx_mask_irqs(client, da9210_mask_regs, - ARRAY_SIZE(da9210_mask_regs)); + if ((client->addr == 0x58 && !strcmp(client->name, "da9063")) || + (client->addr == 0x68 && !strcmp(client->name, "da9210"))) { + int ret; + + dev_info(&client->dev, "clearing da9063/da9210 interrupts\n"); + ret = i2c_transfer(client->adapter, da9xxx_msgs, ARRAY_SIZE(da9xxx_msgs)); + if (ret != ARRAY_SIZE(da9xxx_msgs)) + dev_err(&client->dev, "i2c error %d\n", ret); + } mon = ioread32(irqc + IRQC_MONITOR); if (mon & REGULATOR_IRQ_MASK) diff --git a/arch/arm/mach-shmobile/setup-r8a7740.c b/arch/arm/mach-shmobile/setup-r8a7740.c index db6dbfbaf..3849eef0d 100644 --- a/arch/arm/mach-shmobile/setup-r8a7740.c +++ b/arch/arm/mach-shmobile/setup-r8a7740.c @@ -18,7 +18,6 @@ #include <linux/io.h> #include <linux/irqchip.h> #include <linux/irqchip/arm-gic.h> -#include <linux/of_platform.h> #include <asm/mach/map.h> #include <asm/mach/arch.h> @@ -77,8 +76,6 @@ static void __init r8a7740_init_irq_of(void) static void __init r8a7740_generic_init(void) { r8a7740_meram_workaround(); - - of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL); } static const char *const r8a7740_boards_compat_dt[] __initconst = { diff --git a/arch/arm/mach-shmobile/setup-r8a7790.c b/arch/arm/mach-shmobile/setup-r8a7790.c index 3a18af492..3506327e0 100644 --- a/arch/arm/mach-shmobile/setup-r8a7790.c +++ b/arch/arm/mach-shmobile/setup-r8a7790.c @@ -28,6 +28,7 @@ static const char * const r8a7790_boards_compat_dt[] __initconst = { }; DT_MACHINE_START(R8A7790_DT, "Generic R8A7790 (Flattened Device Tree)") + .smp_init = shmobile_smp_init_fallback_ops, .smp = smp_ops(r8a7790_smp_ops), .init_early = shmobile_init_delay, .init_time = rcar_gen2_timer_init, diff --git a/arch/arm/mach-shmobile/setup-r8a7791.c b/arch/arm/mach-shmobile/setup-r8a7791.c index 3b8dbaf07..110e8b588 100644 --- a/arch/arm/mach-shmobile/setup-r8a7791.c +++ b/arch/arm/mach-shmobile/setup-r8a7791.c @@ -29,6 +29,7 @@ static const char *const r8a7791_boards_compat_dt[] __initconst = { }; DT_MACHINE_START(R8A7791_DT, "Generic R8A7791 (Flattened Device Tree)") + .smp_init = shmobile_smp_init_fallback_ops, .smp = smp_ops(r8a7791_smp_ops), .init_early = shmobile_init_delay, .init_time = rcar_gen2_timer_init, diff --git a/arch/arm/mach-shmobile/setup-r8a7792.c b/arch/arm/mach-shmobile/setup-r8a7792.c new file mode 100644 index 000000000..a0910395d --- /dev/null +++ b/arch/arm/mach-shmobile/setup-r8a7792.c @@ -0,0 +1,35 @@ +/* + * r8a7792 processor support + * + * Copyright (C) 2014 Renesas Electronics Corporation + * Copyright (C) 2016 Cogent Embedded, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <linux/of_platform.h> + +#include <asm/mach/arch.h> + +#include "common.h" +#include "rcar-gen2.h" + +static const char * const r8a7792_boards_compat_dt[] __initconst = { + "renesas,r8a7792", + NULL, +}; + +DT_MACHINE_START(R8A7792_DT, "Generic R8A7792 (Flattened Device Tree)") + .init_early = shmobile_init_delay, + .init_late = shmobile_init_late, + .init_time = rcar_gen2_timer_init, + .reserve = rcar_gen2_reserve, + .dt_compat = r8a7792_boards_compat_dt, +MACHINE_END diff --git a/arch/arm/mach-shmobile/setup-rcar-gen2.c b/arch/arm/mach-shmobile/setup-rcar-gen2.c index 1c6fd11c2..afb9fdcd3 100644 --- a/arch/arm/mach-shmobile/setup-rcar-gen2.c +++ b/arch/arm/mach-shmobile/setup-rcar-gen2.c @@ -46,6 +46,26 @@ u32 rcar_gen2_read_mode_pins(void) return mode; } +static unsigned int __init get_extal_freq(void) +{ + struct device_node *cpg, *extal; + u32 freq = 20000000; + + cpg = of_find_compatible_node(NULL, NULL, + "renesas,rcar-gen2-cpg-clocks"); + if (!cpg) + return freq; + + extal = of_parse_phandle(cpg, "clocks", 0); + of_node_put(cpg); + if (!extal) + return freq; + + of_property_read_u32(extal, "clock-frequency", &freq); + of_node_put(extal); + return freq; +} + #define CNTCR 0 #define CNTFID0 0x20 @@ -54,10 +74,10 @@ void __init rcar_gen2_timer_init(void) u32 mode = rcar_gen2_read_mode_pins(); #ifdef CONFIG_ARM_ARCH_TIMER void __iomem *base; - int extal_mhz = 0; u32 freq; - if (of_machine_is_compatible("renesas,r8a7794")) { + if (of_machine_is_compatible("renesas,r8a7792") || + of_machine_is_compatible("renesas,r8a7794")) { freq = 260000000 / 8; /* ZS / 8 */ /* CNTVOFF has to be initialized either from non-secure * Hypervisor mode or secure Monitor mode with SCR.NS==1. @@ -82,26 +102,9 @@ void __init rcar_gen2_timer_init(void) * with the counter disabled. Moreover, it may also report * a potentially incorrect fixed 13 MHz frequency. To be * correct these registers need to be updated to use the - * frequency EXTAL / 2 which can be determined by the MD pins. + * frequency EXTAL / 2. */ - - switch (mode & (MD(14) | MD(13))) { - case 0: - extal_mhz = 15; - break; - case MD(13): - extal_mhz = 20; - break; - case MD(14): - extal_mhz = 26; - break; - case MD(13) | MD(14): - extal_mhz = 30; - break; - } - - /* The arch timer frequency equals EXTAL / 2 */ - freq = extal_mhz * (1000000 / 2); + freq = get_extal_freq() / 2; } /* Remap "armgcnt address map" space */ diff --git a/arch/arm/mach-shmobile/setup-sh73a0.c b/arch/arm/mach-shmobile/setup-sh73a0.c index 99a2004ca..a25ff188e 100644 --- a/arch/arm/mach-shmobile/setup-sh73a0.c +++ b/arch/arm/mach-shmobile/setup-sh73a0.c @@ -18,7 +18,6 @@ #include <linux/init.h> #include <linux/interrupt.h> #include <linux/irq.h> -#include <linux/of_platform.h> #include <linux/delay.h> #include <linux/input.h> #include <linux/io.h> @@ -55,7 +54,6 @@ static void __init sh73a0_generic_init(void) /* Shared attribute override enable, 64K*8way */ l2x0_init(IOMEM(0xf0100000), 0x00400000, 0xc20f0fff); #endif - of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL); } static const char *const sh73a0_boards_compat_dt[] __initconst = { diff --git a/arch/arm/mach-spear/Kconfig b/arch/arm/mach-spear/Kconfig index ea9ea9563..b7260c2b5 100644 --- a/arch/arm/mach-spear/Kconfig +++ b/arch/arm/mach-spear/Kconfig @@ -5,9 +5,9 @@ menuconfig PLAT_SPEAR bool "ST SPEAr Family" depends on ARCH_MULTI_V7 || ARCH_MULTI_V5 - select ARCH_REQUIRE_GPIOLIB select ARM_AMBA select CLKSRC_MMIO + select GPIOLIB if PLAT_SPEAR diff --git a/arch/arm/mach-spear/spear1310.c b/arch/arm/mach-spear/spear1310.c index cd5d375d9..a7d4f1368 100644 --- a/arch/arm/mach-spear/spear1310.c +++ b/arch/arm/mach-spear/spear1310.c @@ -14,7 +14,6 @@ #define pr_fmt(fmt) "SPEAr1310: " fmt #include <linux/amba/pl022.h> -#include <linux/of_platform.h> #include <linux/pata_arasan_cf_data.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> @@ -27,7 +26,6 @@ static void __init spear1310_dt_init(void) { - of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL); platform_device_register_simple("spear-cpufreq", -1, NULL, 0); } diff --git a/arch/arm/mach-spear/spear1340.c b/arch/arm/mach-spear/spear1340.c index 94594d5a4..a212af90c 100644 --- a/arch/arm/mach-spear/spear1340.c +++ b/arch/arm/mach-spear/spear1340.c @@ -19,7 +19,6 @@ static void __init spear1340_dt_init(void) { - of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL); platform_device_register_simple("spear-cpufreq", -1, NULL, 0); } diff --git a/arch/arm/mach-spear/spear300.c b/arch/arm/mach-spear/spear300.c index 5b32edda2..325b89579 100644 --- a/arch/arm/mach-spear/spear300.c +++ b/arch/arm/mach-spear/spear300.c @@ -194,8 +194,7 @@ static void __init spear300_dt_init(void) pl080_plat_data.slave_channels = spear300_dma_info; pl080_plat_data.num_slave_channels = ARRAY_SIZE(spear300_dma_info); - of_platform_populate(NULL, of_default_bus_match_table, - spear300_auxdata_lookup, NULL); + of_platform_default_populate(NULL, spear300_auxdata_lookup, NULL); } static const char * const spear300_dt_board_compat[] = { diff --git a/arch/arm/mach-spear/spear310.c b/arch/arm/mach-spear/spear310.c index 86a44ac7f..59e173dc8 100644 --- a/arch/arm/mach-spear/spear310.c +++ b/arch/arm/mach-spear/spear310.c @@ -236,8 +236,7 @@ static void __init spear310_dt_init(void) pl080_plat_data.slave_channels = spear310_dma_info; pl080_plat_data.num_slave_channels = ARRAY_SIZE(spear310_dma_info); - of_platform_populate(NULL, of_default_bus_match_table, - spear310_auxdata_lookup, NULL); + of_platform_default_populate(NULL, spear310_auxdata_lookup, NULL); } static const char * const spear310_dt_board_compat[] = { diff --git a/arch/arm/mach-spear/spear320.c b/arch/arm/mach-spear/spear320.c index d45d75192..0958f68a2 100644 --- a/arch/arm/mach-spear/spear320.c +++ b/arch/arm/mach-spear/spear320.c @@ -240,8 +240,7 @@ static void __init spear320_dt_init(void) pl080_plat_data.slave_channels = spear320_dma_info; pl080_plat_data.num_slave_channels = ARRAY_SIZE(spear320_dma_info); - of_platform_populate(NULL, of_default_bus_match_table, - spear320_auxdata_lookup, NULL); + of_platform_default_populate(NULL, spear320_auxdata_lookup, NULL); } static const char * const spear320_dt_board_compat[] = { diff --git a/arch/arm/mach-spear/spear6xx.c b/arch/arm/mach-spear/spear6xx.c index da26fa5b6..ccf3573b8 100644 --- a/arch/arm/mach-spear/spear6xx.c +++ b/arch/arm/mach-spear/spear6xx.c @@ -411,8 +411,7 @@ struct of_dev_auxdata spear6xx_auxdata_lookup[] __initdata = { static void __init spear600_dt_init(void) { - of_platform_populate(NULL, of_default_bus_match_table, - spear6xx_auxdata_lookup, NULL); + of_platform_default_populate(NULL, spear6xx_auxdata_lookup, NULL); } static const char *spear600_dt_board_compat[] = { diff --git a/arch/arm/mach-sti/Kconfig b/arch/arm/mach-sti/Kconfig index 6f1af29f9..119e1108b 100644 --- a/arch/arm/mach-sti/Kconfig +++ b/arch/arm/mach-sti/Kconfig @@ -10,7 +10,7 @@ menuconfig ARCH_STI select MFD_SYSCON select ARCH_HAS_RESET_CONTROLLER select HAVE_ARM_SCU if SMP - select ARCH_REQUIRE_GPIOLIB + select GPIOLIB select ARM_ERRATA_754322 select ARM_ERRATA_764369 if SMP select ARM_ERRATA_775420 diff --git a/arch/arm/mach-sti/board-dt.c b/arch/arm/mach-sti/board-dt.c index ae10fb280..e04cd1b20 100644 --- a/arch/arm/mach-sti/board-dt.c +++ b/arch/arm/mach-sti/board-dt.c @@ -23,7 +23,15 @@ static const char *const stih41x_dt_match[] __initconst = { NULL }; -DT_MACHINE_START(STM, "STiH415/416 SoC with Flattened Device Tree") +static void sti_l2_write_sec(unsigned long val, unsigned reg) +{ + /* + * We can't write to secure registers as we are in non-secure + * mode, until we have some SMI service available. + */ +} + +DT_MACHINE_START(STM, "STi SoC with Flattened Device Tree") .dt_compat = stih41x_dt_match, .l2c_aux_val = L2C_AUX_CTRL_SHARED_OVERRIDE | L310_AUX_CTRL_DATA_PREFETCH | @@ -31,4 +39,5 @@ DT_MACHINE_START(STM, "STiH415/416 SoC with Flattened Device Tree") L2C_AUX_CTRL_WAY_SIZE(4), .l2c_aux_mask = 0xc0000fff, .smp = smp_ops(sti_smp_ops), + .l2c_write_sec = sti_l2_write_sec, MACHINE_END diff --git a/arch/arm/mach-sunxi/Kconfig b/arch/arm/mach-sunxi/Kconfig index c124d658b..096ed216c 100644 --- a/arch/arm/mach-sunxi/Kconfig +++ b/arch/arm/mach-sunxi/Kconfig @@ -1,10 +1,10 @@ menuconfig ARCH_SUNXI bool "Allwinner SoCs" depends on ARCH_MULTI_V7 - select ARCH_REQUIRE_GPIOLIB select ARCH_HAS_RESET_CONTROLLER select CLKSRC_MMIO select GENERIC_IRQ_CHIP + select GPIOLIB select PINCTRL select SUN4I_TIMER select RESET_CONTROLLER diff --git a/arch/arm/mach-tango/Makefile b/arch/arm/mach-tango/Makefile index f33935e42..204fcd9fe 100644 --- a/arch/arm/mach-tango/Makefile +++ b/arch/arm/mach-tango/Makefile @@ -3,3 +3,4 @@ AFLAGS_smc.o := -Wa,-march=armv7-a$(plus_sec) obj-y += setup.o smc.o obj-$(CONFIG_SMP) += platsmp.o +obj-$(CONFIG_SUSPEND) += pm.o diff --git a/arch/arm/mach-tango/platsmp.c b/arch/arm/mach-tango/platsmp.c index a21f55e00..98c62a4a8 100644 --- a/arch/arm/mach-tango/platsmp.c +++ b/arch/arm/mach-tango/platsmp.c @@ -1,3 +1,4 @@ +#include <linux/delay.h> #include <linux/init.h> #include <linux/smp.h> #include "smc.h" @@ -9,8 +10,42 @@ static int tango_boot_secondary(unsigned int cpu, struct task_struct *idle) return 0; } +#ifdef CONFIG_HOTPLUG_CPU +/* + * cpu_kill() and cpu_die() run concurrently on different cores. + * Firmware will only "kill" a core once it has properly "died". + * Try a few times to kill a core before giving up, and sleep + * between tries to give that core enough time to die. + */ +static int tango_cpu_kill(unsigned int cpu) +{ + int i, err; + + for (i = 0; i < 10; ++i) { + msleep(10); + err = tango_aux_core_kill(cpu); + if (!err) + return true; + } + + return false; +} + +static void tango_cpu_die(unsigned int cpu) +{ + while (tango_aux_core_die(cpu) < 0) + cpu_relax(); + + panic("cpu %d failed to die\n", cpu); +} +#endif + static const struct smp_operations tango_smp_ops __initconst = { .smp_boot_secondary = tango_boot_secondary, +#ifdef CONFIG_HOTPLUG_CPU + .cpu_kill = tango_cpu_kill, + .cpu_die = tango_cpu_die, +#endif }; CPU_METHOD_OF_DECLARE(tango4_smp, "sigma,tango4-smp", &tango_smp_ops); diff --git a/arch/arm/mach-tango/pm.c b/arch/arm/mach-tango/pm.c new file mode 100644 index 000000000..b05c6d6f9 --- /dev/null +++ b/arch/arm/mach-tango/pm.c @@ -0,0 +1,32 @@ +#include <linux/init.h> +#include <linux/suspend.h> +#include <asm/suspend.h> +#include "smc.h" + +static int tango_pm_powerdown(unsigned long arg) +{ + tango_suspend(virt_to_phys(cpu_resume)); + + return -EIO; /* tango_suspend has failed */ +} + +static int tango_pm_enter(suspend_state_t state) +{ + if (state == PM_SUSPEND_MEM) + return cpu_suspend(0, tango_pm_powerdown); + + return -EINVAL; +} + +static const struct platform_suspend_ops tango_pm_ops = { + .enter = tango_pm_enter, + .valid = suspend_valid_only_mem, +}; + +static int __init tango_pm_init(void) +{ + suspend_set_ops(&tango_pm_ops); + return 0; +} + +late_initcall(tango_pm_init); diff --git a/arch/arm/mach-tango/smc.h b/arch/arm/mach-tango/smc.h index 7a4af35cc..57919539d 100644 --- a/arch/arm/mach-tango/smc.h +++ b/arch/arm/mach-tango/smc.h @@ -2,4 +2,7 @@ extern int tango_smc(unsigned int val, unsigned int service); #define tango_set_l2_control(val) tango_smc(val, 0x102) #define tango_start_aux_core(val) tango_smc(val, 0x104) -#define tango_set_aux_boot_addr(val) tango_smc((unsigned int)val, 0x105) +#define tango_set_aux_boot_addr(val) tango_smc(val, 0x105) +#define tango_suspend(val) tango_smc(val, 0x120) +#define tango_aux_core_die(val) tango_smc(val, 0x121) +#define tango_aux_core_kill(val) tango_smc(val, 0x122) diff --git a/arch/arm/mach-tegra/Kconfig b/arch/arm/mach-tegra/Kconfig index 0fa8b84ed..329f01c5b 100644 --- a/arch/arm/mach-tegra/Kconfig +++ b/arch/arm/mach-tegra/Kconfig @@ -1,11 +1,11 @@ menuconfig ARCH_TEGRA bool "NVIDIA Tegra" depends on ARCH_MULTI_V7 - select ARCH_REQUIRE_GPIOLIB select ARCH_SUPPORTS_TRUSTED_FOUNDATIONS select ARM_AMBA select ARM_GIC select CLKSRC_MMIO + select GPIOLIB select HAVE_ARM_SCU if SMP select HAVE_ARM_TWD if SMP select PINCTRL diff --git a/arch/arm/mach-tegra/common.h b/arch/arm/mach-tegra/common.h index 1f6fb808e..4cc00e993 100644 --- a/arch/arm/mach-tegra/common.h +++ b/arch/arm/mach-tegra/common.h @@ -1,4 +1,26 @@ +/* + * Copyright (c) 2011, ARM Ltd. + * Copyright (c) 2013, NVIDIA Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#ifndef __MACH_TEGRA_COMMON_H +#define __MACH_TEGRA_COMMON_H + extern const struct smp_operations tegra_smp_ops; extern int tegra_cpu_kill(unsigned int cpu); extern void tegra_cpu_die(unsigned int cpu); + +#endif diff --git a/arch/arm/mach-tegra/cpuidle-tegra114.c b/arch/arm/mach-tegra/cpuidle-tegra114.c index 9157546fe..d3aa9be16 100644 --- a/arch/arm/mach-tegra/cpuidle-tegra114.c +++ b/arch/arm/mach-tegra/cpuidle-tegra114.c @@ -26,6 +26,7 @@ #include <asm/suspend.h> #include <asm/psci.h> +#include "cpuidle.h" #include "pm.h" #include "sleep.h" diff --git a/arch/arm/mach-tegra/cpuidle-tegra20.c b/arch/arm/mach-tegra/cpuidle-tegra20.c index 7469347b1..afcee04f2 100644 --- a/arch/arm/mach-tegra/cpuidle-tegra20.c +++ b/arch/arm/mach-tegra/cpuidle-tegra20.c @@ -30,6 +30,7 @@ #include <asm/smp_plat.h> #include <asm/suspend.h> +#include "cpuidle.h" #include "flowctrl.h" #include "iomap.h" #include "irq.h" diff --git a/arch/arm/mach-tegra/cpuidle-tegra30.c b/arch/arm/mach-tegra/cpuidle-tegra30.c index 4dbe1dae9..c1417361e 100644 --- a/arch/arm/mach-tegra/cpuidle-tegra30.c +++ b/arch/arm/mach-tegra/cpuidle-tegra30.c @@ -30,6 +30,7 @@ #include <asm/smp_plat.h> #include <asm/suspend.h> +#include "cpuidle.h" #include "pm.h" #include "sleep.h" diff --git a/arch/arm/mach-tegra/cpuidle.h b/arch/arm/mach-tegra/cpuidle.h index c017dab60..dd1624d4b 100644 --- a/arch/arm/mach-tegra/cpuidle.h +++ b/arch/arm/mach-tegra/cpuidle.h @@ -23,8 +23,10 @@ void tegra20_cpuidle_pcie_irqs_in_use(void); int tegra30_cpuidle_init(void); int tegra114_cpuidle_init(void); void tegra_cpuidle_init(void); +void tegra_cpuidle_pcie_irqs_in_use(void); #else static inline void tegra_cpuidle_init(void) {} +static inline void tegra_cpuidle_pcie_irqs_in_use(void) {} #endif #endif diff --git a/arch/arm/mach-tegra/hotplug.c b/arch/arm/mach-tegra/hotplug.c index 1b129899a..8ec707826 100644 --- a/arch/arm/mach-tegra/hotplug.c +++ b/arch/arm/mach-tegra/hotplug.c @@ -17,6 +17,7 @@ #include <asm/smp_plat.h> +#include "common.h" #include "sleep.h" static void (*tegra_hotplug_shutdown)(void); diff --git a/arch/arm/mach-tegra/irq.c b/arch/arm/mach-tegra/irq.c index 3b9098d27..a69b22d37 100644 --- a/arch/arm/mach-tegra/irq.c +++ b/arch/arm/mach-tegra/irq.c @@ -29,6 +29,7 @@ #include "board.h" #include "iomap.h" +#include "irq.h" #define SGI_MASK 0xFFFF diff --git a/arch/arm/mach-tegra/pm.h b/arch/arm/mach-tegra/pm.h index 83bc87583..717b48f22 100644 --- a/arch/arm/mach-tegra/pm.h +++ b/arch/arm/mach-tegra/pm.h @@ -36,7 +36,7 @@ void tegra30_sleep_core_init(void); void tegra_clear_cpu_in_lp2(void); bool tegra_set_cpu_in_lp2(void); - +int tegra_cpu_do_idle(void); void tegra_idle_lp2_last(void); extern void (*tegra_tear_down_cpu)(void); diff --git a/arch/arm/mach-tegra/tegra.c b/arch/arm/mach-tegra/tegra.c index 2378fa560..e01cbca19 100644 --- a/arch/arm/mach-tegra/tegra.c +++ b/arch/arm/mach-tegra/tegra.c @@ -115,35 +115,17 @@ static void __init tegra_dt_init(void) * devices */ out: - of_platform_populate(NULL, of_default_bus_match_table, NULL, parent); + of_platform_default_populate(NULL, NULL, parent); } -static void __init paz00_init(void) -{ - if (IS_ENABLED(CONFIG_ARCH_TEGRA_2x_SOC)) - tegra_paz00_wifikill_init(); -} - -static struct { - char *machine; - void (*init)(void); -} board_init_funcs[] = { - { "compal,paz00", paz00_init }, -}; - static void __init tegra_dt_init_late(void) { - int i; - tegra_init_suspend(); tegra_cpuidle_init(); - for (i = 0; i < ARRAY_SIZE(board_init_funcs); i++) { - if (of_machine_is_compatible(board_init_funcs[i].machine)) { - board_init_funcs[i].init(); - break; - } - } + if (IS_ENABLED(CONFIG_ARCH_TEGRA_2x_SOC) && + of_machine_is_compatible("compal,paz00")) + tegra_paz00_wifikill_init(); } static const char * const tegra_dt_board_compat[] = { diff --git a/arch/arm/mach-u300/Kconfig b/arch/arm/mach-u300/Kconfig index 301a98498..22dcbf5b7 100644 --- a/arch/arm/mach-u300/Kconfig +++ b/arch/arm/mach-u300/Kconfig @@ -1,11 +1,11 @@ menuconfig ARCH_U300 bool "ST-Ericsson U300 Series" depends on ARCH_MULTI_V5 && MMU - select ARCH_REQUIRE_GPIOLIB select ARM_AMBA select ARM_VIC - select CLKSRC_MMIO + select U300_TIMER select CPU_ARM926T + select GPIOLIB select HAVE_TCM select PINCTRL select PINCTRL_COH901 diff --git a/arch/arm/mach-u300/core.c b/arch/arm/mach-u300/core.c index 546338bba..a4910ea68 100644 --- a/arch/arm/mach-u300/core.c +++ b/arch/arm/mach-u300/core.c @@ -391,8 +391,7 @@ static void __init u300_init_machine_dt(void) pinctrl_register_mappings(u300_pinmux_map, ARRAY_SIZE(u300_pinmux_map)); - of_platform_populate(NULL, of_default_bus_match_table, - u300_auxdata_lookup, NULL); + of_platform_default_populate(NULL, u300_auxdata_lookup, NULL); /* Enable SEMI self refresh */ val = readw(syscon_base + U300_SYSCON_SMCR) | diff --git a/arch/arm/mach-uniphier/Makefile b/arch/arm/mach-uniphier/Makefile index 1233f9b61..396afe109 100644 --- a/arch/arm/mach-uniphier/Makefile +++ b/arch/arm/mach-uniphier/Makefile @@ -1,2 +1 @@ -obj-y := uniphier.o obj-$(CONFIG_SMP) += platsmp.o headsmp.o diff --git a/arch/arm/mach-uniphier/platsmp.c b/arch/arm/mach-uniphier/platsmp.c index e802ca836..9978c4112 100644 --- a/arch/arm/mach-uniphier/platsmp.c +++ b/arch/arm/mach-uniphier/platsmp.c @@ -101,21 +101,13 @@ static int __init uniphier_smp_prepare_trampoline(unsigned int max_cpus) np = of_find_compatible_node(NULL, NULL, "socionext,uniphier-smpctrl"); ret = of_address_to_resource(np, 0, &res); of_node_put(np); - if (!ret) { - rom_rsv2_phys = res.start + UNIPHIER_SMPCTRL_ROM_RSV2; - } else { - /* try old binding too */ - np = of_find_compatible_node(NULL, NULL, - "socionext,uniphier-system-bus-controller"); - ret = of_address_to_resource(np, 1, &res); - of_node_put(np); - if (ret) { - pr_err("failed to get resource of SMP control\n"); - return ret; - } - rom_rsv2_phys = res.start + 0x1000 + UNIPHIER_SMPCTRL_ROM_RSV2; + if (ret) { + pr_err("failed to get resource of SMP control\n"); + return ret; } + rom_rsv2_phys = res.start + UNIPHIER_SMPCTRL_ROM_RSV2; + ret = uniphier_smp_copy_trampoline(rom_rsv2_phys); if (ret) return ret; diff --git a/arch/arm/mach-ux500/Kconfig b/arch/arm/mach-ux500/Kconfig index 3185081bd..4740ac393 100644 --- a/arch/arm/mach-ux500/Kconfig +++ b/arch/arm/mach-ux500/Kconfig @@ -3,13 +3,13 @@ menuconfig ARCH_U8500 depends on ARCH_MULTI_V7 && MMU select AB8500_CORE select ABX500_CORE - select ARCH_REQUIRE_GPIOLIB select ARM_AMBA select ARM_ERRATA_754322 select ARM_ERRATA_764369 if SMP select ARM_GIC select CACHE_L2X0 select CLKSRC_NOMADIK_MTU + select GPIOLIB select HAVE_ARM_SCU if SMP select HAVE_ARM_TWD if SMP select PINCTRL diff --git a/arch/arm/mach-ux500/Makefile b/arch/arm/mach-ux500/Makefile index edfff1ae1..56d0eb6e2 100644 --- a/arch/arm/mach-ux500/Makefile +++ b/arch/arm/mach-ux500/Makefile @@ -2,11 +2,9 @@ # Makefile for the linux kernel, U8500 machine. # -obj-y := cpu.o id.o pm.o -obj-$(CONFIG_CACHE_L2X0) += cache-l2x0.o +obj-y := pm.o obj-$(CONFIG_UX500_SOC_DB8500) += cpu-db8500.o -obj-$(CONFIG_MACH_MOP500) += board-mop500-regulators.o \ - board-mop500-audio.o +obj-$(CONFIG_MACH_MOP500) += board-mop500-audio.o obj-$(CONFIG_SMP) += platsmp.o obj-$(CONFIG_HOTPLUG_CPU) += hotplug.o obj-$(CONFIG_PM_GENERIC_DOMAINS) += pm_domains.o diff --git a/arch/arm/mach-ux500/cpu-db8500.c b/arch/arm/mach-ux500/cpu-db8500.c index a55795547..46b1da1bf 100644 --- a/arch/arm/mach-ux500/cpu-db8500.c +++ b/arch/arm/mach-ux500/cpu-db8500.c @@ -12,41 +12,107 @@ #include <linux/init.h> #include <linux/device.h> #include <linux/amba/bus.h> +#include <linux/init.h> #include <linux/interrupt.h> #include <linux/irq.h> +#include <linux/irqchip.h> +#include <linux/irqchip/arm-gic.h> +#include <linux/mfd/dbx500-prcmu.h> +#include <linux/platform_data/arm-ux500-pm.h> #include <linux/platform_device.h> #include <linux/io.h> -#include <linux/mfd/abx500/ab8500.h> -#include <linux/mfd/dbx500-prcmu.h> #include <linux/of.h> +#include <linux/of_address.h> #include <linux/of_platform.h> #include <linux/perf/arm_pmu.h> #include <linux/regulator/machine.h> -#include <linux/random.h> +#include <asm/outercache.h> +#include <asm/hardware/cache-l2x0.h> #include <asm/mach/map.h> +#include <asm/mach/arch.h> #include "setup.h" -#include "board-mop500-regulators.h" #include "board-mop500.h" #include "db8500-regs.h" -#include "id.h" -static struct ab8500_platform_data ab8500_platdata = { - .regulator = &ab8500_regulator_plat_data, -}; +static int __init ux500_l2x0_unlock(void) +{ + int i; + struct device_node *np; + void __iomem *l2x0_base; -static struct prcmu_pdata db8500_prcmu_pdata = { - .ab_platdata = &ab8500_platdata, - .version_offset = DB8500_PRCMU_FW_VERSION_OFFSET, - .legacy_offset = DB8500_PRCMU_LEGACY_OFFSET, -}; + np = of_find_compatible_node(NULL, NULL, "arm,pl310-cache"); + l2x0_base = of_iomap(np, 0); + of_node_put(np); + if (!l2x0_base) + return -ENODEV; + + /* + * Unlock Data and Instruction Lock if locked. Ux500 U-Boot versions + * apparently locks both caches before jumping to the kernel. The + * l2x0 core will not touch the unlock registers if the l2x0 is + * already enabled, so we do it right here instead. The PL310 has + * 8 sets of registers, one per possible CPU. + */ + for (i = 0; i < 8; i++) { + writel_relaxed(0x0, l2x0_base + L2X0_LOCKDOWN_WAY_D_BASE + + i * L2X0_LOCKDOWN_STRIDE); + writel_relaxed(0x0, l2x0_base + L2X0_LOCKDOWN_WAY_I_BASE + + i * L2X0_LOCKDOWN_STRIDE); + } + iounmap(l2x0_base); + return 0; +} + +static void ux500_l2c310_write_sec(unsigned long val, unsigned reg) +{ + /* + * We can't write to secure registers as we are in non-secure + * mode, until we have some SMI service available. + */ +} -static void __init u8500_map_io(void) +/* + * FIXME: Should we set up the GPIO domain here? + * + * The problem is that we cannot put the interrupt resources into the platform + * device until the irqdomain has been added. Right now, we set the GIC interrupt + * domain from init_irq(), then load the gpio driver from + * core_initcall(nmk_gpio_init) and add the platform devices from + * arch_initcall(customize_machine). + * + * This feels fragile because it depends on the gpio device getting probed + * _before_ any device uses the gpio interrupts. +*/ +static void __init ux500_init_irq(void) +{ + struct device_node *np; + struct resource r; + + irqchip_init(); + np = of_find_compatible_node(NULL, NULL, "stericsson,db8500-prcmu"); + of_address_to_resource(np, 0, &r); + of_node_put(np); + if (!r.start) { + pr_err("could not find PRCMU base resource\n"); + return; + } + prcmu_early_init(r.start, r.end-r.start); + ux500_pm_init(r.start, r.end-r.start); + + /* Unlock before init */ + ux500_l2x0_unlock(); + outer_cache.write_sec = ux500_l2c310_write_sec; +} + +static void ux500_restart(enum reboot_mode mode, const char *cmd) { - debug_ll_io_init(); - ux500_setup_id(); + local_irq_disable(); + local_fiq_disable(); + + prcmu_system_reset(0); } /* @@ -73,31 +139,6 @@ static struct arm_pmu_platdata db8500_pmu_platdata = { .handle_irq = db8500_pmu_handler, }; -static const char *db8500_read_soc_id(void) -{ - void __iomem *uid; - const char *retstr; - - uid = ioremap(U8500_BB_UID_BASE, 0x20); - if (!uid) - return NULL; - /* Throw these device-specific numbers into the entropy pool */ - add_device_randomness(uid, 0x14); - retstr = kasprintf(GFP_KERNEL, "%08x%08x%08x%08x%08x", - readl((u32 *)uid+0), - readl((u32 *)uid+1), readl((u32 *)uid+2), - readl((u32 *)uid+3), readl((u32 *)uid+4)); - iounmap(uid); - return retstr; -} - -static struct device * __init db8500_soc_device_init(void) -{ - const char *soc_id = db8500_read_soc_id(); - - return ux500_soc_device_init(soc_id); -} - static struct of_dev_auxdata u8500_auxdata_lookup[] __initdata = { /* Requires call-back bindings. */ OF_DEV_AUXDATA("arm,cortex-a9-pmu", 0, "arm-pmu", &db8500_pmu_platdata), @@ -111,8 +152,7 @@ static struct of_dev_auxdata u8500_auxdata_lookup[] __initdata = { OF_DEV_AUXDATA("stericsson,ux500-msp-i2s", 0x80125000, "ux500-msp-i2s.3", &msp3_platform_data), /* Requires non-DT:able platform data. */ - OF_DEV_AUXDATA("stericsson,db8500-prcmu", 0x80157000, "db8500-prcmu", - &db8500_prcmu_pdata), + OF_DEV_AUXDATA("stericsson,db8500-prcmu", 0x80157000, "db8500-prcmu", NULL), OF_DEV_AUXDATA("stericsson,ux500-cryp", 0xa03cb000, "cryp1", NULL), OF_DEV_AUXDATA("stericsson,ux500-hash", 0xa03c2000, "hash1", NULL), OF_DEV_AUXDATA("stericsson,snd-soc-mop500", 0, "snd-soc-mop500.0", @@ -121,8 +161,7 @@ static struct of_dev_auxdata u8500_auxdata_lookup[] __initdata = { }; static struct of_dev_auxdata u8540_auxdata_lookup[] __initdata = { - OF_DEV_AUXDATA("stericsson,db8500-prcmu", 0x80157000, "db8500-prcmu", - &db8500_prcmu_pdata), + OF_DEV_AUXDATA("stericsson,db8500-prcmu", 0x80157000, "db8500-prcmu", NULL), {}, }; @@ -136,15 +175,13 @@ static const struct of_device_id u8500_local_bus_nodes[] = { static void __init u8500_init_machine(void) { - struct device *parent = db8500_soc_device_init(); - /* automatically probe child nodes of dbx5x0 devices */ if (of_machine_is_compatible("st-ericsson,u8540")) of_platform_populate(NULL, u8500_local_bus_nodes, - u8540_auxdata_lookup, parent); + u8540_auxdata_lookup, NULL); else of_platform_populate(NULL, u8500_local_bus_nodes, - u8500_auxdata_lookup, parent); + u8500_auxdata_lookup, NULL); } static const char * stericsson_dt_platform_compat[] = { @@ -156,10 +193,10 @@ static const char * stericsson_dt_platform_compat[] = { }; DT_MACHINE_START(U8500_DT, "ST-Ericsson Ux5x0 platform (Device Tree Support)") - .map_io = u8500_map_io, + .l2c_aux_val = 0, + .l2c_aux_mask = ~0, .init_irq = ux500_init_irq, .init_machine = u8500_init_machine, - .init_late = NULL, .dt_compat = stericsson_dt_platform_compat, .restart = ux500_restart, MACHINE_END diff --git a/arch/arm/mach-ux500/platsmp.c b/arch/arm/mach-ux500/platsmp.c index 88b8ab4f3..8f2f615ff 100644 --- a/arch/arm/mach-ux500/platsmp.c +++ b/arch/arm/mach-ux500/platsmp.c @@ -26,7 +26,6 @@ #include "setup.h" #include "db8500-regs.h" -#include "id.h" /* Magic triggers in backup RAM */ #define UX500_CPU1_JUMPADDR_OFFSET 0x1FF4 diff --git a/arch/arm/mach-ux500/setup.h b/arch/arm/mach-ux500/setup.h index c704254ab..988e7c770 100644 --- a/arch/arm/mach-ux500/setup.h +++ b/arch/arm/mach-ux500/setup.h @@ -11,18 +11,6 @@ #ifndef __ASM_ARCH_SETUP_H #define __ASM_ARCH_SETUP_H -#include <asm/mach/arch.h> -#include <linux/init.h> -#include <linux/mfd/abx500/ab8500.h> - -void ux500_restart(enum reboot_mode mode, const char *cmd); - -void __init ux500_setup_id(void); - -extern void __init ux500_init_irq(void); - -extern struct device *ux500_soc_device_init(const char *soc_id); - extern void ux500_cpu_die(unsigned int cpu); #endif /* __ASM_ARCH_SETUP_H */ diff --git a/arch/arm/mach-versatile/versatile_dt.c b/arch/arm/mach-versatile/versatile_dt.c index d643b9210..3c8d39c12 100644 --- a/arch/arm/mach-versatile/versatile_dt.c +++ b/arch/arm/mach-versatile/versatile_dt.c @@ -344,8 +344,7 @@ static void __init versatile_dt_init(void) versatile_dt_pci_init(); - of_platform_populate(NULL, of_default_bus_match_table, - versatile_auxdata_lookup, NULL); + of_platform_default_populate(NULL, versatile_auxdata_lookup, NULL); } static const char *const versatile_dt_match[] __initconst = { diff --git a/arch/arm/mach-vexpress/Kconfig b/arch/arm/mach-vexpress/Kconfig index 398a297b7..7c728ebc0 100644 --- a/arch/arm/mach-vexpress/Kconfig +++ b/arch/arm/mach-vexpress/Kconfig @@ -1,13 +1,13 @@ menuconfig ARCH_VEXPRESS bool "ARM Ltd. Versatile Express family" depends on ARCH_MULTI_V7 - select ARCH_REQUIRE_GPIOLIB select ARCH_SUPPORTS_BIG_ENDIAN select ARM_AMBA select ARM_GIC select ARM_GLOBAL_TIMER select ARM_TIMER_SP804 select COMMON_CLK_VERSATILE + select GPIOLIB select HAVE_ARM_SCU if SMP select HAVE_ARM_TWD if SMP select HAVE_PATA_PLATFORM diff --git a/arch/arm/mach-vexpress/hotplug.c b/arch/arm/mach-vexpress/hotplug.c index f2fafc10a..d8f1a05f5 100644 --- a/arch/arm/mach-vexpress/hotplug.c +++ b/arch/arm/mach-vexpress/hotplug.c @@ -15,6 +15,8 @@ #include <asm/smp_plat.h> #include <asm/cp15.h> +#include "core.h" + static inline void cpu_enter_lowpower(void) { unsigned int v; diff --git a/arch/arm/mach-vexpress/spc.c b/arch/arm/mach-vexpress/spc.c index 8409cab3f..fe4885236 100644 --- a/arch/arm/mach-vexpress/spc.c +++ b/arch/arm/mach-vexpress/spc.c @@ -31,6 +31,8 @@ #include <asm/cacheflush.h> +#include "spc.h" + #define SPCLOG "vexpress-spc: " #define PERF_LVL_A15 0x00 @@ -319,17 +321,15 @@ static int ve_spc_waitforcompletion(int req_type) static int ve_spc_set_performance(int cluster, u32 freq) { - u32 perf_cfg_reg, perf_stat_reg; + u32 perf_cfg_reg; int ret, perf, req_type; if (cluster_is_a15(cluster)) { req_type = CA15_DVFS; perf_cfg_reg = PERF_LVL_A15; - perf_stat_reg = PERF_REQ_A15; } else { req_type = CA7_DVFS; perf_cfg_reg = PERF_LVL_A7; - perf_stat_reg = PERF_REQ_A7; } perf = ve_spc_find_performance_index(cluster, freq); diff --git a/arch/arm/mach-vt8500/Kconfig b/arch/arm/mach-vt8500/Kconfig index aaaa24fe4..c4f1dba7b 100644 --- a/arch/arm/mach-vt8500/Kconfig +++ b/arch/arm/mach-vt8500/Kconfig @@ -1,6 +1,6 @@ config ARCH_VT8500 bool - select ARCH_REQUIRE_GPIOLIB + select GPIOLIB select CLKDEV_LOOKUP select VT8500_TIMER select PINCTRL diff --git a/arch/arm/mach-vt8500/vt8500.c b/arch/arm/mach-vt8500/vt8500.c index 3bc0dc9a4..773c04fdb 100644 --- a/arch/arm/mach-vt8500/vt8500.c +++ b/arch/arm/mach-vt8500/vt8500.c @@ -30,7 +30,6 @@ #include <linux/of.h> #include <linux/of_address.h> #include <linux/of_irq.h> -#include <linux/of_platform.h> #define LEGACY_GPIO_BASE 0xD8110000 #define LEGACY_PMC_BASE 0xD8130000 @@ -158,8 +157,6 @@ static void __init vt8500_init(void) pm_power_off = &vt8500_power_off; else pr_err("%s: PMC Hibernation register could not be remapped, not enabling power off!\n", __func__); - - of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL); } static const char * const vt8500_dt_compat[] = { diff --git a/arch/arm/mach-zynq/common.c b/arch/arm/mach-zynq/common.c index da876d28c..d12002cd6 100644 --- a/arch/arm/mach-zynq/common.c +++ b/arch/arm/mach-zynq/common.c @@ -141,7 +141,7 @@ out: * Finished with the static registrations now; fill in the missing * devices */ - of_platform_populate(NULL, of_default_bus_match_table, NULL, parent); + of_platform_default_populate(NULL, NULL, parent); platform_device_register(&zynq_cpuidle_device); } diff --git a/arch/arm/mm/Kconfig b/arch/arm/mm/Kconfig index cb569b65a..d15a7fe51 100644 --- a/arch/arm/mm/Kconfig +++ b/arch/arm/mm/Kconfig @@ -1025,12 +1025,6 @@ config ARM_DMA_MEM_BUFFERABLE You are recommended say 'Y' here and debug any affected drivers. -config ARCH_HAS_BARRIERS - bool - help - This option allows the use of custom mandatory barriers - included via the mach/barriers.h file. - config ARM_HEAVY_MB bool diff --git a/arch/arm/mm/cache-l2x0.c b/arch/arm/mm/cache-l2x0.c index c61996c25..cc12905ae 100644 --- a/arch/arm/mm/cache-l2x0.c +++ b/arch/arm/mm/cache-l2x0.c @@ -597,17 +597,16 @@ static void l2c310_configure(void __iomem *base) L310_POWER_CTRL); } -static int l2c310_cpu_enable_flz(struct notifier_block *nb, unsigned long act, void *data) +static int l2c310_starting_cpu(unsigned int cpu) { - switch (act & ~CPU_TASKS_FROZEN) { - case CPU_STARTING: - set_auxcr(get_auxcr() | BIT(3) | BIT(2) | BIT(1)); - break; - case CPU_DYING: - set_auxcr(get_auxcr() & ~(BIT(3) | BIT(2) | BIT(1))); - break; - } - return NOTIFY_OK; + set_auxcr(get_auxcr() | BIT(3) | BIT(2) | BIT(1)); + return 0; +} + +static int l2c310_dying_cpu(unsigned int cpu) +{ + set_auxcr(get_auxcr() & ~(BIT(3) | BIT(2) | BIT(1))); + return 0; } static void __init l2c310_enable(void __iomem *base, unsigned num_lock) @@ -678,10 +677,10 @@ static void __init l2c310_enable(void __iomem *base, unsigned num_lock) power_ctrl & L310_STNDBY_MODE_EN ? "en" : "dis"); } - if (aux & L310_AUX_CTRL_FULL_LINE_ZERO) { - set_auxcr(get_auxcr() | BIT(3) | BIT(2) | BIT(1)); - cpu_notifier(l2c310_cpu_enable_flz, 0); - } + if (aux & L310_AUX_CTRL_FULL_LINE_ZERO) + cpuhp_setup_state(CPUHP_AP_ARM_L2X0_STARTING, + "AP_ARM_L2X0_STARTING", l2c310_starting_cpu, + l2c310_dying_cpu); } static void __init l2c310_fixup(void __iomem *base, u32 cache_id, diff --git a/arch/arm/mm/dma-mapping.c b/arch/arm/mm/dma-mapping.c index d2485c749..c6834c0cf 100644 --- a/arch/arm/mm/dma-mapping.c +++ b/arch/arm/mm/dma-mapping.c @@ -128,16 +128,16 @@ static void __dma_page_dev_to_cpu(struct page *, unsigned long, */ static dma_addr_t arm_dma_map_page(struct device *dev, struct page *page, unsigned long offset, size_t size, enum dma_data_direction dir, - struct dma_attrs *attrs) + unsigned long attrs) { - if (!dma_get_attr(DMA_ATTR_SKIP_CPU_SYNC, attrs)) + if ((attrs & DMA_ATTR_SKIP_CPU_SYNC) == 0) __dma_page_cpu_to_dev(page, offset, size, dir); return pfn_to_dma(dev, page_to_pfn(page)) + offset; } static dma_addr_t arm_coherent_dma_map_page(struct device *dev, struct page *page, unsigned long offset, size_t size, enum dma_data_direction dir, - struct dma_attrs *attrs) + unsigned long attrs) { return pfn_to_dma(dev, page_to_pfn(page)) + offset; } @@ -157,10 +157,9 @@ static dma_addr_t arm_coherent_dma_map_page(struct device *dev, struct page *pag * whatever the device wrote there. */ static void arm_dma_unmap_page(struct device *dev, dma_addr_t handle, - size_t size, enum dma_data_direction dir, - struct dma_attrs *attrs) + size_t size, enum dma_data_direction dir, unsigned long attrs) { - if (!dma_get_attr(DMA_ATTR_SKIP_CPU_SYNC, attrs)) + if ((attrs & DMA_ATTR_SKIP_CPU_SYNC) == 0) __dma_page_dev_to_cpu(pfn_to_page(dma_to_pfn(dev, handle)), handle & ~PAGE_MASK, size, dir); } @@ -198,12 +197,12 @@ struct dma_map_ops arm_dma_ops = { EXPORT_SYMBOL(arm_dma_ops); static void *arm_coherent_dma_alloc(struct device *dev, size_t size, - dma_addr_t *handle, gfp_t gfp, struct dma_attrs *attrs); + dma_addr_t *handle, gfp_t gfp, unsigned long attrs); static void arm_coherent_dma_free(struct device *dev, size_t size, void *cpu_addr, - dma_addr_t handle, struct dma_attrs *attrs); + dma_addr_t handle, unsigned long attrs); static int arm_coherent_dma_mmap(struct device *dev, struct vm_area_struct *vma, void *cpu_addr, dma_addr_t dma_addr, size_t size, - struct dma_attrs *attrs); + unsigned long attrs); struct dma_map_ops arm_coherent_dma_ops = { .alloc = arm_coherent_dma_alloc, @@ -639,11 +638,11 @@ static void __free_from_contiguous(struct device *dev, struct page *page, dma_release_from_contiguous(dev, page, size >> PAGE_SHIFT); } -static inline pgprot_t __get_dma_pgprot(struct dma_attrs *attrs, pgprot_t prot) +static inline pgprot_t __get_dma_pgprot(unsigned long attrs, pgprot_t prot) { - prot = dma_get_attr(DMA_ATTR_WRITE_COMBINE, attrs) ? - pgprot_writecombine(prot) : - pgprot_dmacoherent(prot); + prot = (attrs & DMA_ATTR_WRITE_COMBINE) ? + pgprot_writecombine(prot) : + pgprot_dmacoherent(prot); return prot; } @@ -751,7 +750,7 @@ static struct arm_dma_allocator remap_allocator = { static void *__dma_alloc(struct device *dev, size_t size, dma_addr_t *handle, gfp_t gfp, pgprot_t prot, bool is_coherent, - struct dma_attrs *attrs, const void *caller) + unsigned long attrs, const void *caller) { u64 mask = get_coherent_dma_mask(dev); struct page *page = NULL; @@ -764,7 +763,7 @@ static void *__dma_alloc(struct device *dev, size_t size, dma_addr_t *handle, .gfp = gfp, .prot = prot, .caller = caller, - .want_vaddr = !dma_get_attr(DMA_ATTR_NO_KERNEL_MAPPING, attrs), + .want_vaddr = ((attrs & DMA_ATTR_NO_KERNEL_MAPPING) == 0), .coherent_flag = is_coherent ? COHERENT : NORMAL, }; @@ -834,7 +833,7 @@ static void *__dma_alloc(struct device *dev, size_t size, dma_addr_t *handle, * virtual and bus address for that space. */ void *arm_dma_alloc(struct device *dev, size_t size, dma_addr_t *handle, - gfp_t gfp, struct dma_attrs *attrs) + gfp_t gfp, unsigned long attrs) { pgprot_t prot = __get_dma_pgprot(attrs, PAGE_KERNEL); @@ -843,7 +842,7 @@ void *arm_dma_alloc(struct device *dev, size_t size, dma_addr_t *handle, } static void *arm_coherent_dma_alloc(struct device *dev, size_t size, - dma_addr_t *handle, gfp_t gfp, struct dma_attrs *attrs) + dma_addr_t *handle, gfp_t gfp, unsigned long attrs) { return __dma_alloc(dev, size, handle, gfp, PAGE_KERNEL, true, attrs, __builtin_return_address(0)); @@ -851,7 +850,7 @@ static void *arm_coherent_dma_alloc(struct device *dev, size_t size, static int __arm_dma_mmap(struct device *dev, struct vm_area_struct *vma, void *cpu_addr, dma_addr_t dma_addr, size_t size, - struct dma_attrs *attrs) + unsigned long attrs) { int ret = -ENXIO; #ifdef CONFIG_MMU @@ -879,14 +878,14 @@ static int __arm_dma_mmap(struct device *dev, struct vm_area_struct *vma, */ static int arm_coherent_dma_mmap(struct device *dev, struct vm_area_struct *vma, void *cpu_addr, dma_addr_t dma_addr, size_t size, - struct dma_attrs *attrs) + unsigned long attrs) { return __arm_dma_mmap(dev, vma, cpu_addr, dma_addr, size, attrs); } int arm_dma_mmap(struct device *dev, struct vm_area_struct *vma, void *cpu_addr, dma_addr_t dma_addr, size_t size, - struct dma_attrs *attrs) + unsigned long attrs) { #ifdef CONFIG_MMU vma->vm_page_prot = __get_dma_pgprot(attrs, vma->vm_page_prot); @@ -898,7 +897,7 @@ int arm_dma_mmap(struct device *dev, struct vm_area_struct *vma, * Free a buffer as defined by the above mapping. */ static void __arm_dma_free(struct device *dev, size_t size, void *cpu_addr, - dma_addr_t handle, struct dma_attrs *attrs, + dma_addr_t handle, unsigned long attrs, bool is_coherent) { struct page *page = pfn_to_page(dma_to_pfn(dev, handle)); @@ -908,7 +907,7 @@ static void __arm_dma_free(struct device *dev, size_t size, void *cpu_addr, .size = PAGE_ALIGN(size), .cpu_addr = cpu_addr, .page = page, - .want_vaddr = !dma_get_attr(DMA_ATTR_NO_KERNEL_MAPPING, attrs), + .want_vaddr = ((attrs & DMA_ATTR_NO_KERNEL_MAPPING) == 0), }; buf = arm_dma_buffer_find(cpu_addr); @@ -920,20 +919,20 @@ static void __arm_dma_free(struct device *dev, size_t size, void *cpu_addr, } void arm_dma_free(struct device *dev, size_t size, void *cpu_addr, - dma_addr_t handle, struct dma_attrs *attrs) + dma_addr_t handle, unsigned long attrs) { __arm_dma_free(dev, size, cpu_addr, handle, attrs, false); } static void arm_coherent_dma_free(struct device *dev, size_t size, void *cpu_addr, - dma_addr_t handle, struct dma_attrs *attrs) + dma_addr_t handle, unsigned long attrs) { __arm_dma_free(dev, size, cpu_addr, handle, attrs, true); } int arm_dma_get_sgtable(struct device *dev, struct sg_table *sgt, void *cpu_addr, dma_addr_t handle, size_t size, - struct dma_attrs *attrs) + unsigned long attrs) { struct page *page = pfn_to_page(dma_to_pfn(dev, handle)); int ret; @@ -1066,7 +1065,7 @@ static void __dma_page_dev_to_cpu(struct page *page, unsigned long off, * here. */ int arm_dma_map_sg(struct device *dev, struct scatterlist *sg, int nents, - enum dma_data_direction dir, struct dma_attrs *attrs) + enum dma_data_direction dir, unsigned long attrs) { struct dma_map_ops *ops = get_dma_ops(dev); struct scatterlist *s; @@ -1100,7 +1099,7 @@ int arm_dma_map_sg(struct device *dev, struct scatterlist *sg, int nents, * rules concerning calls here are the same as for dma_unmap_single(). */ void arm_dma_unmap_sg(struct device *dev, struct scatterlist *sg, int nents, - enum dma_data_direction dir, struct dma_attrs *attrs) + enum dma_data_direction dir, unsigned long attrs) { struct dma_map_ops *ops = get_dma_ops(dev); struct scatterlist *s; @@ -1273,7 +1272,7 @@ static inline void __free_iova(struct dma_iommu_mapping *mapping, static const int iommu_order_array[] = { 9, 8, 4, 0 }; static struct page **__iommu_alloc_buffer(struct device *dev, size_t size, - gfp_t gfp, struct dma_attrs *attrs, + gfp_t gfp, unsigned long attrs, int coherent_flag) { struct page **pages; @@ -1289,7 +1288,7 @@ static struct page **__iommu_alloc_buffer(struct device *dev, size_t size, if (!pages) return NULL; - if (dma_get_attr(DMA_ATTR_FORCE_CONTIGUOUS, attrs)) + if (attrs & DMA_ATTR_FORCE_CONTIGUOUS) { unsigned long order = get_order(size); struct page *page; @@ -1307,7 +1306,7 @@ static struct page **__iommu_alloc_buffer(struct device *dev, size_t size, } /* Go straight to 4K chunks if caller says it's OK. */ - if (dma_get_attr(DMA_ATTR_ALLOC_SINGLE_PAGES, attrs)) + if (attrs & DMA_ATTR_ALLOC_SINGLE_PAGES) order_idx = ARRAY_SIZE(iommu_order_array) - 1; /* @@ -1363,12 +1362,12 @@ error: } static int __iommu_free_buffer(struct device *dev, struct page **pages, - size_t size, struct dma_attrs *attrs) + size_t size, unsigned long attrs) { int count = size >> PAGE_SHIFT; int i; - if (dma_get_attr(DMA_ATTR_FORCE_CONTIGUOUS, attrs)) { + if (attrs & DMA_ATTR_FORCE_CONTIGUOUS) { dma_release_from_contiguous(dev, pages[0], count); } else { for (i = 0; i < count; i++) @@ -1460,14 +1459,14 @@ static struct page **__atomic_get_pages(void *addr) return (struct page **)page; } -static struct page **__iommu_get_pages(void *cpu_addr, struct dma_attrs *attrs) +static struct page **__iommu_get_pages(void *cpu_addr, unsigned long attrs) { struct vm_struct *area; if (__in_atomic_pool(cpu_addr, PAGE_SIZE)) return __atomic_get_pages(cpu_addr); - if (dma_get_attr(DMA_ATTR_NO_KERNEL_MAPPING, attrs)) + if (attrs & DMA_ATTR_NO_KERNEL_MAPPING) return cpu_addr; area = find_vm_area(cpu_addr); @@ -1476,13 +1475,16 @@ static struct page **__iommu_get_pages(void *cpu_addr, struct dma_attrs *attrs) return NULL; } -static void *__iommu_alloc_atomic(struct device *dev, size_t size, - dma_addr_t *handle) +static void *__iommu_alloc_simple(struct device *dev, size_t size, gfp_t gfp, + dma_addr_t *handle, int coherent_flag) { struct page *page; void *addr; - addr = __alloc_from_pool(size, &page); + if (coherent_flag == COHERENT) + addr = __alloc_simple_buffer(dev, size, gfp, &page); + else + addr = __alloc_from_pool(size, &page); if (!addr) return NULL; @@ -1498,14 +1500,18 @@ err_mapping: } static void __iommu_free_atomic(struct device *dev, void *cpu_addr, - dma_addr_t handle, size_t size) + dma_addr_t handle, size_t size, int coherent_flag) { __iommu_remove_mapping(dev, handle, size); - __free_from_pool(cpu_addr, size); + if (coherent_flag == COHERENT) + __dma_free_buffer(virt_to_page(cpu_addr), size); + else + __free_from_pool(cpu_addr, size); } -static void *arm_iommu_alloc_attrs(struct device *dev, size_t size, - dma_addr_t *handle, gfp_t gfp, struct dma_attrs *attrs) +static void *__arm_iommu_alloc_attrs(struct device *dev, size_t size, + dma_addr_t *handle, gfp_t gfp, unsigned long attrs, + int coherent_flag) { pgprot_t prot = __get_dma_pgprot(attrs, PAGE_KERNEL); struct page **pages; @@ -1514,8 +1520,9 @@ static void *arm_iommu_alloc_attrs(struct device *dev, size_t size, *handle = DMA_ERROR_CODE; size = PAGE_ALIGN(size); - if (!gfpflags_allow_blocking(gfp)) - return __iommu_alloc_atomic(dev, size, handle); + if (coherent_flag == COHERENT || !gfpflags_allow_blocking(gfp)) + return __iommu_alloc_simple(dev, size, gfp, handle, + coherent_flag); /* * Following is a work-around (a.k.a. hack) to prevent pages @@ -1526,8 +1533,7 @@ static void *arm_iommu_alloc_attrs(struct device *dev, size_t size, */ gfp &= ~(__GFP_COMP); - /* For now always consider we are in a non-coherent case */ - pages = __iommu_alloc_buffer(dev, size, gfp, attrs, NORMAL); + pages = __iommu_alloc_buffer(dev, size, gfp, attrs, coherent_flag); if (!pages) return NULL; @@ -1535,7 +1541,7 @@ static void *arm_iommu_alloc_attrs(struct device *dev, size_t size, if (*handle == DMA_ERROR_CODE) goto err_buffer; - if (dma_get_attr(DMA_ATTR_NO_KERNEL_MAPPING, attrs)) + if (attrs & DMA_ATTR_NO_KERNEL_MAPPING) return pages; addr = __iommu_alloc_remap(pages, size, gfp, prot, @@ -1552,9 +1558,21 @@ err_buffer: return NULL; } -static int arm_iommu_mmap_attrs(struct device *dev, struct vm_area_struct *vma, +static void *arm_iommu_alloc_attrs(struct device *dev, size_t size, + dma_addr_t *handle, gfp_t gfp, unsigned long attrs) +{ + return __arm_iommu_alloc_attrs(dev, size, handle, gfp, attrs, NORMAL); +} + +static void *arm_coherent_iommu_alloc_attrs(struct device *dev, size_t size, + dma_addr_t *handle, gfp_t gfp, unsigned long attrs) +{ + return __arm_iommu_alloc_attrs(dev, size, handle, gfp, attrs, COHERENT); +} + +static int __arm_iommu_mmap_attrs(struct device *dev, struct vm_area_struct *vma, void *cpu_addr, dma_addr_t dma_addr, size_t size, - struct dma_attrs *attrs) + unsigned long attrs) { unsigned long uaddr = vma->vm_start; unsigned long usize = vma->vm_end - vma->vm_start; @@ -1562,8 +1580,6 @@ static int arm_iommu_mmap_attrs(struct device *dev, struct vm_area_struct *vma, unsigned long nr_pages = PAGE_ALIGN(size) >> PAGE_SHIFT; unsigned long off = vma->vm_pgoff; - vma->vm_page_prot = __get_dma_pgprot(attrs, vma->vm_page_prot); - if (!pages) return -ENXIO; @@ -1584,19 +1600,34 @@ static int arm_iommu_mmap_attrs(struct device *dev, struct vm_area_struct *vma, return 0; } +static int arm_iommu_mmap_attrs(struct device *dev, + struct vm_area_struct *vma, void *cpu_addr, + dma_addr_t dma_addr, size_t size, unsigned long attrs) +{ + vma->vm_page_prot = __get_dma_pgprot(attrs, vma->vm_page_prot); + + return __arm_iommu_mmap_attrs(dev, vma, cpu_addr, dma_addr, size, attrs); +} + +static int arm_coherent_iommu_mmap_attrs(struct device *dev, + struct vm_area_struct *vma, void *cpu_addr, + dma_addr_t dma_addr, size_t size, unsigned long attrs) +{ + return __arm_iommu_mmap_attrs(dev, vma, cpu_addr, dma_addr, size, attrs); +} /* * free a page as defined by the above mapping. * Must not be called with IRQs disabled. */ -void arm_iommu_free_attrs(struct device *dev, size_t size, void *cpu_addr, - dma_addr_t handle, struct dma_attrs *attrs) +void __arm_iommu_free_attrs(struct device *dev, size_t size, void *cpu_addr, + dma_addr_t handle, unsigned long attrs, int coherent_flag) { struct page **pages; size = PAGE_ALIGN(size); - if (__in_atomic_pool(cpu_addr, size)) { - __iommu_free_atomic(dev, cpu_addr, handle, size); + if (coherent_flag == COHERENT || __in_atomic_pool(cpu_addr, size)) { + __iommu_free_atomic(dev, cpu_addr, handle, size, coherent_flag); return; } @@ -1606,7 +1637,7 @@ void arm_iommu_free_attrs(struct device *dev, size_t size, void *cpu_addr, return; } - if (!dma_get_attr(DMA_ATTR_NO_KERNEL_MAPPING, attrs)) { + if ((attrs & DMA_ATTR_NO_KERNEL_MAPPING) == 0) { dma_common_free_remap(cpu_addr, size, VM_ARM_DMA_CONSISTENT | VM_USERMAP); } @@ -1615,9 +1646,21 @@ void arm_iommu_free_attrs(struct device *dev, size_t size, void *cpu_addr, __iommu_free_buffer(dev, pages, size, attrs); } +void arm_iommu_free_attrs(struct device *dev, size_t size, + void *cpu_addr, dma_addr_t handle, unsigned long attrs) +{ + __arm_iommu_free_attrs(dev, size, cpu_addr, handle, attrs, NORMAL); +} + +void arm_coherent_iommu_free_attrs(struct device *dev, size_t size, + void *cpu_addr, dma_addr_t handle, unsigned long attrs) +{ + __arm_iommu_free_attrs(dev, size, cpu_addr, handle, attrs, COHERENT); +} + static int arm_iommu_get_sgtable(struct device *dev, struct sg_table *sgt, void *cpu_addr, dma_addr_t dma_addr, - size_t size, struct dma_attrs *attrs) + size_t size, unsigned long attrs) { unsigned int count = PAGE_ALIGN(size) >> PAGE_SHIFT; struct page **pages = __iommu_get_pages(cpu_addr, attrs); @@ -1655,7 +1698,7 @@ static int __dma_direction_to_prot(enum dma_data_direction dir) */ static int __map_sg_chunk(struct device *dev, struct scatterlist *sg, size_t size, dma_addr_t *handle, - enum dma_data_direction dir, struct dma_attrs *attrs, + enum dma_data_direction dir, unsigned long attrs, bool is_coherent) { struct dma_iommu_mapping *mapping = to_dma_iommu_mapping(dev); @@ -1676,8 +1719,7 @@ static int __map_sg_chunk(struct device *dev, struct scatterlist *sg, phys_addr_t phys = page_to_phys(sg_page(s)); unsigned int len = PAGE_ALIGN(s->offset + s->length); - if (!is_coherent && - !dma_get_attr(DMA_ATTR_SKIP_CPU_SYNC, attrs)) + if (!is_coherent && (attrs & DMA_ATTR_SKIP_CPU_SYNC) == 0) __dma_page_cpu_to_dev(sg_page(s), s->offset, s->length, dir); prot = __dma_direction_to_prot(dir); @@ -1698,7 +1740,7 @@ fail: } static int __iommu_map_sg(struct device *dev, struct scatterlist *sg, int nents, - enum dma_data_direction dir, struct dma_attrs *attrs, + enum dma_data_direction dir, unsigned long attrs, bool is_coherent) { struct scatterlist *s = sg, *dma = sg, *start = sg; @@ -1756,7 +1798,7 @@ bad_mapping: * obtained via sg_dma_{address,length}. */ int arm_coherent_iommu_map_sg(struct device *dev, struct scatterlist *sg, - int nents, enum dma_data_direction dir, struct dma_attrs *attrs) + int nents, enum dma_data_direction dir, unsigned long attrs) { return __iommu_map_sg(dev, sg, nents, dir, attrs, true); } @@ -1774,14 +1816,14 @@ int arm_coherent_iommu_map_sg(struct device *dev, struct scatterlist *sg, * sg_dma_{address,length}. */ int arm_iommu_map_sg(struct device *dev, struct scatterlist *sg, - int nents, enum dma_data_direction dir, struct dma_attrs *attrs) + int nents, enum dma_data_direction dir, unsigned long attrs) { return __iommu_map_sg(dev, sg, nents, dir, attrs, false); } static void __iommu_unmap_sg(struct device *dev, struct scatterlist *sg, - int nents, enum dma_data_direction dir, struct dma_attrs *attrs, - bool is_coherent) + int nents, enum dma_data_direction dir, + unsigned long attrs, bool is_coherent) { struct scatterlist *s; int i; @@ -1790,8 +1832,7 @@ static void __iommu_unmap_sg(struct device *dev, struct scatterlist *sg, if (sg_dma_len(s)) __iommu_remove_mapping(dev, sg_dma_address(s), sg_dma_len(s)); - if (!is_coherent && - !dma_get_attr(DMA_ATTR_SKIP_CPU_SYNC, attrs)) + if (!is_coherent && (attrs & DMA_ATTR_SKIP_CPU_SYNC) == 0) __dma_page_dev_to_cpu(sg_page(s), s->offset, s->length, dir); } @@ -1808,7 +1849,8 @@ static void __iommu_unmap_sg(struct device *dev, struct scatterlist *sg, * rules concerning calls here are the same as for dma_unmap_single(). */ void arm_coherent_iommu_unmap_sg(struct device *dev, struct scatterlist *sg, - int nents, enum dma_data_direction dir, struct dma_attrs *attrs) + int nents, enum dma_data_direction dir, + unsigned long attrs) { __iommu_unmap_sg(dev, sg, nents, dir, attrs, true); } @@ -1824,7 +1866,8 @@ void arm_coherent_iommu_unmap_sg(struct device *dev, struct scatterlist *sg, * rules concerning calls here are the same as for dma_unmap_single(). */ void arm_iommu_unmap_sg(struct device *dev, struct scatterlist *sg, int nents, - enum dma_data_direction dir, struct dma_attrs *attrs) + enum dma_data_direction dir, + unsigned long attrs) { __iommu_unmap_sg(dev, sg, nents, dir, attrs, false); } @@ -1877,7 +1920,7 @@ void arm_iommu_sync_sg_for_device(struct device *dev, struct scatterlist *sg, */ static dma_addr_t arm_coherent_iommu_map_page(struct device *dev, struct page *page, unsigned long offset, size_t size, enum dma_data_direction dir, - struct dma_attrs *attrs) + unsigned long attrs) { struct dma_iommu_mapping *mapping = to_dma_iommu_mapping(dev); dma_addr_t dma_addr; @@ -1911,9 +1954,9 @@ fail: */ static dma_addr_t arm_iommu_map_page(struct device *dev, struct page *page, unsigned long offset, size_t size, enum dma_data_direction dir, - struct dma_attrs *attrs) + unsigned long attrs) { - if (!dma_get_attr(DMA_ATTR_SKIP_CPU_SYNC, attrs)) + if ((attrs & DMA_ATTR_SKIP_CPU_SYNC) == 0) __dma_page_cpu_to_dev(page, offset, size, dir); return arm_coherent_iommu_map_page(dev, page, offset, size, dir, attrs); @@ -1929,8 +1972,7 @@ static dma_addr_t arm_iommu_map_page(struct device *dev, struct page *page, * Coherent IOMMU aware version of arm_dma_unmap_page() */ static void arm_coherent_iommu_unmap_page(struct device *dev, dma_addr_t handle, - size_t size, enum dma_data_direction dir, - struct dma_attrs *attrs) + size_t size, enum dma_data_direction dir, unsigned long attrs) { struct dma_iommu_mapping *mapping = to_dma_iommu_mapping(dev); dma_addr_t iova = handle & PAGE_MASK; @@ -1954,8 +1996,7 @@ static void arm_coherent_iommu_unmap_page(struct device *dev, dma_addr_t handle, * IOMMU aware version of arm_dma_unmap_page() */ static void arm_iommu_unmap_page(struct device *dev, dma_addr_t handle, - size_t size, enum dma_data_direction dir, - struct dma_attrs *attrs) + size_t size, enum dma_data_direction dir, unsigned long attrs) { struct dma_iommu_mapping *mapping = to_dma_iommu_mapping(dev); dma_addr_t iova = handle & PAGE_MASK; @@ -1966,7 +2007,7 @@ static void arm_iommu_unmap_page(struct device *dev, dma_addr_t handle, if (!iova) return; - if (!dma_get_attr(DMA_ATTR_SKIP_CPU_SYNC, attrs)) + if ((attrs & DMA_ATTR_SKIP_CPU_SYNC) == 0) __dma_page_dev_to_cpu(page, offset, size, dir); iommu_unmap(mapping->domain, iova, len); @@ -2019,9 +2060,9 @@ struct dma_map_ops iommu_ops = { }; struct dma_map_ops iommu_coherent_ops = { - .alloc = arm_iommu_alloc_attrs, - .free = arm_iommu_free_attrs, - .mmap = arm_iommu_mmap_attrs, + .alloc = arm_coherent_iommu_alloc_attrs, + .free = arm_coherent_iommu_free_attrs, + .mmap = arm_coherent_iommu_mmap_attrs, .get_sgtable = arm_iommu_get_sgtable, .map_page = arm_coherent_iommu_map_page, diff --git a/arch/arm/mm/fault.c b/arch/arm/mm/fault.c index ad5841856..3a2e678b8 100644 --- a/arch/arm/mm/fault.c +++ b/arch/arm/mm/fault.c @@ -243,7 +243,7 @@ good_area: goto out; } - return handle_mm_fault(mm, vma, addr & PAGE_MASK, flags); + return handle_mm_fault(vma, addr & PAGE_MASK, flags); check_stack: /* Don't allow expansion below FIRST_USER_ADDRESS */ diff --git a/arch/arm/mm/mmu.c b/arch/arm/mm/mmu.c index 62f4d0194..30fe03f95 100644 --- a/arch/arm/mm/mmu.c +++ b/arch/arm/mm/mmu.c @@ -137,7 +137,7 @@ void __init init_default_cache_policy(unsigned long pmd) initial_pmd_value = pmd; - pmd &= PMD_SECT_TEX(1) | PMD_SECT_BUFFERABLE | PMD_SECT_CACHEABLE; + pmd &= PMD_SECT_CACHE_MASK; for (i = 0; i < ARRAY_SIZE(cache_policies); i++) if (cache_policies[i].pmd == pmd) { @@ -728,7 +728,8 @@ static void *__init late_alloc(unsigned long sz) { void *ptr = (void *)__get_free_pages(PGALLOC_GFP, get_order(sz)); - BUG_ON(!ptr); + if (!ptr || !pgtable_page_ctor(virt_to_page(ptr))) + BUG(); return ptr; } @@ -1155,10 +1156,19 @@ void __init sanity_check_meminfo(void) { phys_addr_t memblock_limit = 0; int highmem = 0; - phys_addr_t vmalloc_limit = __pa(vmalloc_min - 1) + 1; + u64 vmalloc_limit; struct memblock_region *reg; bool should_use_highmem = false; + /* + * Let's use our own (unoptimized) equivalent of __pa() that is + * not affected by wrap-arounds when sizeof(phys_addr_t) == 4. + * The result is used as the upper bound on physical memory address + * and may itself be outside the valid range for which phys_addr_t + * and therefore __pa() is defined. + */ + vmalloc_limit = (u64)(uintptr_t)vmalloc_min - PAGE_OFFSET + PHYS_OFFSET; + for_each_memblock(memory, reg) { phys_addr_t block_start = reg->base; phys_addr_t block_end = reg->base + reg->size; @@ -1183,10 +1193,11 @@ void __init sanity_check_meminfo(void) if (reg->size > size_limit) { phys_addr_t overlap_size = reg->size - size_limit; - pr_notice("Truncating RAM at %pa-%pa to -%pa", - &block_start, &block_end, &vmalloc_limit); - memblock_remove(vmalloc_limit, overlap_size); + pr_notice("Truncating RAM at %pa-%pa", + &block_start, &block_end); block_end = vmalloc_limit; + pr_cont(" to -%pa", &block_end); + memblock_remove(vmalloc_limit, overlap_size); should_use_highmem = true; } } diff --git a/arch/arm/mm/pgd.c b/arch/arm/mm/pgd.c index b8d477321..c1c1a5c67 100644 --- a/arch/arm/mm/pgd.c +++ b/arch/arm/mm/pgd.c @@ -23,7 +23,7 @@ #define __pgd_alloc() kmalloc(PTRS_PER_PGD * sizeof(pgd_t), GFP_KERNEL) #define __pgd_free(pgd) kfree(pgd) #else -#define __pgd_alloc() (pgd_t *)__get_free_pages(GFP_KERNEL | __GFP_REPEAT, 2) +#define __pgd_alloc() (pgd_t *)__get_free_pages(GFP_KERNEL, 2) #define __pgd_free(pgd) free_pages((unsigned long)pgd, 2) #endif diff --git a/arch/arm/mm/proc-v7.S b/arch/arm/mm/proc-v7.S index 6fcaac8e2..d00d52c9d 100644 --- a/arch/arm/mm/proc-v7.S +++ b/arch/arm/mm/proc-v7.S @@ -16,6 +16,7 @@ #include <asm/hwcap.h> #include <asm/pgtable-hwdef.h> #include <asm/pgtable.h> +#include <asm/memory.h> #include "proc-macros.S" @@ -362,6 +363,39 @@ __ca15_errata: #endif b __errata_finish +__ca12_errata: +#ifdef CONFIG_ARM_ERRATA_818325_852422 + mrc p15, 0, r10, c15, c0, 1 @ read diagnostic register + orr r10, r10, #1 << 12 @ set bit #12 + mcr p15, 0, r10, c15, c0, 1 @ write diagnostic register +#endif +#ifdef CONFIG_ARM_ERRATA_821420 + mrc p15, 0, r10, c15, c0, 2 @ read internal feature reg + orr r10, r10, #1 << 1 @ set bit #1 + mcr p15, 0, r10, c15, c0, 2 @ write internal feature reg +#endif +#ifdef CONFIG_ARM_ERRATA_825619 + mrc p15, 0, r10, c15, c0, 1 @ read diagnostic register + orr r10, r10, #1 << 24 @ set bit #24 + mcr p15, 0, r10, c15, c0, 1 @ write diagnostic register +#endif + b __errata_finish + +__ca17_errata: +#ifdef CONFIG_ARM_ERRATA_852421 + cmp r6, #0x12 @ only present up to r1p2 + mrcle p15, 0, r10, c15, c0, 1 @ read diagnostic register + orrle r10, r10, #1 << 24 @ set bit #24 + mcrle p15, 0, r10, c15, c0, 1 @ write diagnostic register +#endif +#ifdef CONFIG_ARM_ERRATA_852423 + cmp r6, #0x12 @ only present up to r1p2 + mrcle p15, 0, r10, c15, c0, 1 @ read diagnostic register + orrle r10, r10, #1 << 12 @ set bit #12 + mcrle p15, 0, r10, c15, c0, 1 @ write diagnostic register +#endif + b __errata_finish + __v7_pj4b_setup: #ifdef CONFIG_CPU_PJ4B @@ -443,6 +477,16 @@ __v7_setup_cont: teq r0, r10 beq __ca9_errata + /* Cortex-A12 Errata */ + ldr r10, =0x00000c0d @ Cortex-A12 primary part number + teq r0, r10 + beq __ca12_errata + + /* Cortex-A17 Errata */ + ldr r10, =0x00000c0e @ Cortex-A17 primary part number + teq r0, r10 + beq __ca17_errata + /* Cortex-A15 Errata */ ldr r10, =0x00000c0f @ Cortex-A15 primary part number teq r0, r10 diff --git a/arch/arm/plat-iop/setup.c b/arch/arm/plat-iop/setup.c index 5b217f460..8151bde99 100644 --- a/arch/arm/plat-iop/setup.c +++ b/arch/arm/plat-iop/setup.c @@ -20,12 +20,12 @@ * the IOP3xx OCCDR must be mapped uncached and unbuffered. */ static struct map_desc iop3xx_std_desc[] __initdata = { - { /* mem mapped registers */ + { /* mem mapped registers */ .virtual = IOP3XX_PERIPHERAL_VIRT_BASE, .pfn = __phys_to_pfn(IOP3XX_PERIPHERAL_PHYS_BASE), .length = IOP3XX_PERIPHERAL_SIZE, .type = MT_UNCACHED, - }, + }, }; void __init iop3xx_map_io(void) diff --git a/arch/arm/plat-samsung/cpu.c b/arch/arm/plat-samsung/cpu.c index 71333bb61..a107b3a0b 100644 --- a/arch/arm/plat-samsung/cpu.c +++ b/arch/arm/plat-samsung/cpu.c @@ -29,14 +29,14 @@ EXPORT_SYMBOL(samsung_rev); void __init s3c64xx_init_cpu(void) { - samsung_cpu_id = __raw_readl(S3C_VA_SYS + 0x118); + samsung_cpu_id = readl_relaxed(S3C_VA_SYS + 0x118); if (!samsung_cpu_id) { /* * S3C6400 has the ID register in a different place, * and needs a write before it can be read. */ - __raw_writel(0x0, S3C_VA_SYS + 0xA1C); - samsung_cpu_id = __raw_readl(S3C_VA_SYS + 0xA1C); + writel_relaxed(0x0, S3C_VA_SYS + 0xA1C); + samsung_cpu_id = readl_relaxed(S3C_VA_SYS + 0xA1C); } samsung_cpu_rev = 0; @@ -44,9 +44,9 @@ void __init s3c64xx_init_cpu(void) pr_info("Samsung CPU ID: 0x%08lx\n", samsung_cpu_id); } -void __init s5p_init_cpu(void __iomem *cpuid_addr) +void __init s5p_init_cpu(const void __iomem *cpuid_addr) { - samsung_cpu_id = __raw_readl(cpuid_addr); + samsung_cpu_id = readl_relaxed(cpuid_addr); samsung_cpu_rev = samsung_cpu_id & 0xFF; pr_info("Samsung CPU ID: 0x%08lx\n", samsung_cpu_id); diff --git a/arch/arm/plat-samsung/include/plat/cpu-freq-core.h b/arch/arm/plat-samsung/include/plat/cpu-freq-core.h index 317c52303..37cf20e04 100644 --- a/arch/arm/plat-samsung/include/plat/cpu-freq-core.h +++ b/arch/arm/plat-samsung/include/plat/cpu-freq-core.h @@ -39,7 +39,7 @@ struct s3c2410_iobank_timing { unsigned int tacs; unsigned int tcos; unsigned int tacc; - unsigned int tcoh; /* nCS hold afrer nOE/nWE */ + unsigned int tcoh; /* nCS hold after nOE/nWE */ unsigned int tcah; /* Address hold after nCS */ unsigned char nwait_en; /* nWait enabled for bank. */ }; diff --git a/arch/arm/plat-samsung/include/plat/cpu.h b/arch/arm/plat-samsung/include/plat/cpu.h index 61d14f3a0..b7b702a72 100644 --- a/arch/arm/plat-samsung/include/plat/cpu.h +++ b/arch/arm/plat-samsung/include/plat/cpu.h @@ -113,6 +113,7 @@ extern void s3c_init_cpu(unsigned long idcode, extern void s3c24xx_init_io(struct map_desc *mach_desc, int size); extern void s3c64xx_init_cpu(void); +extern void s5p_init_cpu(const void __iomem *cpuid_addr); extern unsigned int samsung_rev(void); diff --git a/arch/arm/plat-samsung/include/plat/fb-s3c2410.h b/arch/arm/plat-samsung/include/plat/fb-s3c2410.h index 4e5d9588b..1f2972a74 100644 --- a/arch/arm/plat-samsung/include/plat/fb-s3c2410.h +++ b/arch/arm/plat-samsung/include/plat/fb-s3c2410.h @@ -48,7 +48,7 @@ struct s3c2410fb_display { struct s3c2410fb_mach_info { - struct s3c2410fb_display *displays; /* attached diplays info */ + struct s3c2410fb_display *displays; /* attached displays info */ unsigned num_displays; /* number of defined displays */ unsigned default_display; diff --git a/arch/arm/plat-samsung/include/plat/gpio-cfg.h b/arch/arm/plat-samsung/include/plat/gpio-cfg.h index b5294eff1..21391faab 100644 --- a/arch/arm/plat-samsung/include/plat/gpio-cfg.h +++ b/arch/arm/plat-samsung/include/plat/gpio-cfg.h @@ -35,7 +35,7 @@ struct samsung_gpio_chip; * struct samsung_gpio_cfg GPIO configuration * @cfg_eint: Configuration setting when used for external interrupt source * @get_pull: Read the current pull configuration for the GPIO - * @set_pull: Set the current pull configuraiton for the GPIO + * @set_pull: Set the current pull configuration for the GPIO * @set_config: Set the current configuration for the GPIO * @get_config: Read the current configuration for the GPIO * diff --git a/arch/arm/plat-samsung/pm-check.c b/arch/arm/plat-samsung/pm-check.c index 70f2f699b..d63516374 100644 --- a/arch/arm/plat-samsung/pm-check.c +++ b/arch/arm/plat-samsung/pm-check.c @@ -5,7 +5,7 @@ * http://armlinux.simtec.co.uk * Ben Dooks <ben@simtec.co.uk> * - * S3C Power Mangament - suspend/resume memory corruptiuon check. + * S3C Power Mangament - suspend/resume memory corruption check. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as diff --git a/arch/arm/plat-samsung/pm-common.c b/arch/arm/plat-samsung/pm-common.c index 515cd5337..6534c3ff9 100644 --- a/arch/arm/plat-samsung/pm-common.c +++ b/arch/arm/plat-samsung/pm-common.c @@ -31,7 +31,7 @@ void s3c_pm_do_save(struct sleep_save *ptr, int count) { for (; count > 0; count--, ptr++) { - ptr->val = __raw_readl(ptr->reg); + ptr->val = readl_relaxed(ptr->reg); S3C_PMDBG("saved %p value %08lx\n", ptr->reg, ptr->val); } } @@ -51,9 +51,9 @@ void s3c_pm_do_restore(const struct sleep_save *ptr, int count) { for (; count > 0; count--, ptr++) { pr_debug("restore %p (restore %08lx, was %08x)\n", - ptr->reg, ptr->val, __raw_readl(ptr->reg)); + ptr->reg, ptr->val, readl_relaxed(ptr->reg)); - __raw_writel(ptr->val, ptr->reg); + writel_relaxed(ptr->val, ptr->reg); } } @@ -71,5 +71,5 @@ void s3c_pm_do_restore(const struct sleep_save *ptr, int count) void s3c_pm_do_restore_core(const struct sleep_save *ptr, int count) { for (; count > 0; count--, ptr++) - __raw_writel(ptr->val, ptr->reg); + writel_relaxed(ptr->val, ptr->reg); } diff --git a/arch/arm/plat-samsung/watchdog-reset.c b/arch/arm/plat-samsung/watchdog-reset.c index 2ecb50bea..307d8ad96 100644 --- a/arch/arm/plat-samsung/watchdog-reset.c +++ b/arch/arm/plat-samsung/watchdog-reset.c @@ -3,7 +3,7 @@ * Copyright (c) 2008 Simtec Electronics * Ben Dooks <ben@simtec.co.uk> * - * Coyright (c) 2013 Tomasz Figa <tomasz.figa@gmail.com> + * Copyright (c) 2013 Tomasz Figa <tomasz.figa@gmail.com> * * Watchdog reset support for Samsung SoCs. * diff --git a/arch/arm/plat-versatile/platsmp.c b/arch/arm/plat-versatile/platsmp.c index 53feb90c8..c23665101 100644 --- a/arch/arm/plat-versatile/platsmp.c +++ b/arch/arm/plat-versatile/platsmp.c @@ -18,6 +18,8 @@ #include <asm/cacheflush.h> #include <asm/smp_plat.h> +#include <plat/platsmp.h> + /* * Write pen_release in a way that is guaranteed to be visible to all * observers, irrespective of whether they're taking part in coherency diff --git a/arch/arm/vfp/vfpmodule.c b/arch/arm/vfp/vfpmodule.c index 73085d348..da0b33deb 100644 --- a/arch/arm/vfp/vfpmodule.c +++ b/arch/arm/vfp/vfpmodule.c @@ -643,19 +643,19 @@ int vfp_restore_user_hwstate(struct user_vfp __user *ufp, * hardware state at every thread switch. We clear our held state when * a CPU has been killed, indicating that the VFP hardware doesn't contain * a threads VFP state. When a CPU starts up, we re-enable access to the - * VFP hardware. - * - * Both CPU_DYING and CPU_STARTING are called on the CPU which + * VFP hardware. The callbacks below are called on the CPU which * is being offlined/onlined. */ -static int vfp_hotplug(struct notifier_block *b, unsigned long action, - void *hcpu) +static int vfp_dying_cpu(unsigned int cpu) { - if (action == CPU_DYING || action == CPU_DYING_FROZEN) - vfp_current_hw_state[(long)hcpu] = NULL; - else if (action == CPU_STARTING || action == CPU_STARTING_FROZEN) - vfp_enable(NULL); - return NOTIFY_OK; + vfp_force_reload(cpu, current_thread_info()); + return 0; +} + +static int vfp_starting_cpu(unsigned int unused) +{ + vfp_enable(NULL); + return 0; } void vfp_kmode_exception(void) @@ -732,6 +732,10 @@ static int __init vfp_init(void) unsigned int vfpsid; unsigned int cpu_arch = cpu_architecture(); + /* + * Enable the access to the VFP on all online CPUs so the + * following test on FPSID will succeed. + */ if (cpu_arch >= CPU_ARCH_ARMv6) on_each_cpu(vfp_enable, NULL, 1); @@ -794,7 +798,9 @@ static int __init vfp_init(void) VFP_arch = (vfpsid & FPSID_ARCH_MASK) >> FPSID_ARCH_BIT; } - hotcpu_notifier(vfp_hotplug, 0); + cpuhp_setup_state_nocalls(CPUHP_AP_ARM_VFP_STARTING, + "AP_ARM_VFP_STARTING", vfp_starting_cpu, + vfp_dying_cpu); vfp_vector = vfp_support_entry; diff --git a/arch/arm/xen/Makefile b/arch/arm/xen/Makefile index 129695234..227952103 100644 --- a/arch/arm/xen/Makefile +++ b/arch/arm/xen/Makefile @@ -1 +1,2 @@ obj-y := enlighten.o hypercall.o grant-table.o p2m.o mm.o +obj-$(CONFIG_XEN_EFI) += efi.o diff --git a/arch/arm/xen/efi.c b/arch/arm/xen/efi.c new file mode 100644 index 000000000..16db419f9 --- /dev/null +++ b/arch/arm/xen/efi.c @@ -0,0 +1,40 @@ +/* + * Copyright (c) 2015, Linaro Limited, Shannon Zhao + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#include <linux/efi.h> +#include <xen/xen-ops.h> +#include <asm/xen/xen-ops.h> + +/* Set XEN EFI runtime services function pointers. Other fields of struct efi, + * e.g. efi.systab, will be set like normal EFI. + */ +void __init xen_efi_runtime_setup(void) +{ + efi.get_time = xen_efi_get_time; + efi.set_time = xen_efi_set_time; + efi.get_wakeup_time = xen_efi_get_wakeup_time; + efi.set_wakeup_time = xen_efi_set_wakeup_time; + efi.get_variable = xen_efi_get_variable; + efi.get_next_variable = xen_efi_get_next_variable; + efi.set_variable = xen_efi_set_variable; + efi.query_variable_info = xen_efi_query_variable_info; + efi.update_capsule = xen_efi_update_capsule; + efi.query_capsule_caps = xen_efi_query_capsule_caps; + efi.get_next_high_mono_count = xen_efi_get_next_high_mono_count; + efi.reset_system = NULL; /* Functionality provided by Xen. */ +} +EXPORT_SYMBOL_GPL(xen_efi_runtime_setup); diff --git a/arch/arm/xen/enlighten.c b/arch/arm/xen/enlighten.c index 75cd7345c..f193414d0 100644 --- a/arch/arm/xen/enlighten.c +++ b/arch/arm/xen/enlighten.c @@ -12,14 +12,16 @@ #include <xen/page.h> #include <xen/interface/sched.h> #include <xen/xen-ops.h> -#include <asm/paravirt.h> #include <asm/xen/hypervisor.h> #include <asm/xen/hypercall.h> +#include <asm/xen/xen-ops.h> #include <asm/system_misc.h> +#include <asm/efi.h> #include <linux/interrupt.h> #include <linux/irqreturn.h> #include <linux/module.h> #include <linux/of.h> +#include <linux/of_fdt.h> #include <linux/of_irq.h> #include <linux/of_address.h> #include <linux/cpuidle.h> @@ -30,6 +32,7 @@ #include <linux/time64.h> #include <linux/timekeeping.h> #include <linux/timekeeper_internal.h> +#include <linux/acpi.h> #include <linux/mm.h> @@ -46,14 +49,16 @@ struct shared_info *HYPERVISOR_shared_info = (void *)&xen_dummy_shared_info; DEFINE_PER_CPU(struct vcpu_info *, xen_vcpu); static struct vcpu_info __percpu *xen_vcpu_info; +/* Linux <-> Xen vCPU id mapping */ +DEFINE_PER_CPU(uint32_t, xen_vcpu_id); +EXPORT_PER_CPU_SYMBOL(xen_vcpu_id); + /* These are unused until we support booting "pre-ballooned" */ unsigned long xen_released_pages; struct xen_memory_region xen_extra_mem[XEN_EXTRA_MEM_MAX_REGIONS] __initdata; static __read_mostly unsigned int xen_events_irq; -static __initdata struct device_node *xen_node; - int xen_remap_domain_gfn_array(struct vm_area_struct *vma, unsigned long addr, xen_pfn_t *gfn, int nr, @@ -84,19 +89,6 @@ int xen_unmap_domain_gfn_range(struct vm_area_struct *vma, } EXPORT_SYMBOL_GPL(xen_unmap_domain_gfn_range); -static unsigned long long xen_stolen_accounting(int cpu) -{ - struct vcpu_runstate_info state; - - BUG_ON(cpu != smp_processor_id()); - - xen_get_runstate_snapshot(&state); - - WARN_ON(state.state != RUNSTATE_running); - - return state.time[RUNSTATE_runnable] + state.time[RUNSTATE_offline]; -} - static void xen_read_wallclock(struct timespec64 *ts) { u32 version; @@ -161,12 +153,11 @@ static struct notifier_block xen_pvclock_gtod_notifier = { .notifier_call = xen_pvclock_gtod_notify, }; -static void xen_percpu_init(void) +static int xen_starting_cpu(unsigned int cpu) { struct vcpu_register_vcpu_info info; struct vcpu_info *vcpup; int err; - int cpu = get_cpu(); /* * VCPUOP_register_vcpu_info cannot be called twice for the same @@ -182,7 +173,8 @@ static void xen_percpu_init(void) info.mfn = virt_to_gfn(vcpup); info.offset = xen_offset_in_page(vcpup); - err = HYPERVISOR_vcpu_op(VCPUOP_register_vcpu_info, cpu, &info); + err = HYPERVISOR_vcpu_op(VCPUOP_register_vcpu_info, xen_vcpu_nr(cpu), + &info); BUG_ON(err); per_cpu(xen_vcpu, cpu) = vcpup; @@ -190,7 +182,13 @@ static void xen_percpu_init(void) after_register_vcpu_info: enable_percpu_irq(xen_events_irq, 0); - put_cpu(); + return 0; +} + +static int xen_dying_cpu(unsigned int cpu) +{ + disable_percpu_irq(xen_events_irq); + return 0; } static void xen_restart(enum reboot_mode reboot_mode, const char *cmd) @@ -209,32 +207,50 @@ static void xen_power_off(void) BUG_ON(rc); } -static int xen_cpu_notification(struct notifier_block *self, - unsigned long action, - void *hcpu) +static irqreturn_t xen_arm_callback(int irq, void *arg) { - switch (action) { - case CPU_STARTING: - xen_percpu_init(); - break; - case CPU_DYING: - disable_percpu_irq(xen_events_irq); - break; - default: - break; - } - - return NOTIFY_OK; + xen_hvm_evtchn_do_upcall(); + return IRQ_HANDLED; } -static struct notifier_block xen_cpu_notifier = { - .notifier_call = xen_cpu_notification, -}; +static __initdata struct { + const char *compat; + const char *prefix; + const char *version; + bool found; +} hyper_node = {"xen,xen", "xen,xen-", NULL, false}; -static irqreturn_t xen_arm_callback(int irq, void *arg) +static int __init fdt_find_hyper_node(unsigned long node, const char *uname, + int depth, void *data) { - xen_hvm_evtchn_do_upcall(); - return IRQ_HANDLED; + const void *s = NULL; + int len; + + if (depth != 1 || strcmp(uname, "hypervisor") != 0) + return 0; + + if (of_flat_dt_is_compatible(node, hyper_node.compat)) + hyper_node.found = true; + + s = of_get_flat_dt_prop(node, "compatible", &len); + if (strlen(hyper_node.prefix) + 3 < len && + !strncmp(hyper_node.prefix, s, strlen(hyper_node.prefix))) + hyper_node.version = s + strlen(hyper_node.prefix); + + /* + * Check if Xen supports EFI by checking whether there is the + * "/hypervisor/uefi" node in DT. If so, runtime services are available + * through proxy functions (e.g. in case of Xen dom0 EFI implementation + * they call special hypercall which executes relevant EFI functions) + * and that is why they are always enabled. + */ + if (IS_ENABLED(CONFIG_XEN_EFI)) { + if ((of_get_flat_dt_subnode_by_name(node, "uefi") > 0) && + !efi_runtime_disabled()) + set_bit(EFI_RUNTIME_SERVICES, &efi.flags); + } + + return 0; } /* @@ -244,26 +260,18 @@ static irqreturn_t xen_arm_callback(int irq, void *arg) #define GRANT_TABLE_PHYSADDR 0 void __init xen_early_init(void) { - int len; - const char *s = NULL; - const char *version = NULL; - const char *xen_prefix = "xen,xen-"; - - xen_node = of_find_compatible_node(NULL, NULL, "xen,xen"); - if (!xen_node) { + of_scan_flat_dt(fdt_find_hyper_node, NULL); + if (!hyper_node.found) { pr_debug("No Xen support\n"); return; } - s = of_get_property(xen_node, "compatible", &len); - if (strlen(xen_prefix) + 3 < len && - !strncmp(xen_prefix, s, strlen(xen_prefix))) - version = s + strlen(xen_prefix); - if (version == NULL) { + + if (hyper_node.version == NULL) { pr_debug("Xen version not found\n"); return; } - pr_info("Xen %s support found\n", version); + pr_info("Xen %s support found\n", hyper_node.version); xen_domain_type = XEN_HVM_DOMAIN; @@ -278,28 +286,69 @@ void __init xen_early_init(void) add_preferred_console("hvc", 0, NULL); } +static void __init xen_acpi_guest_init(void) +{ +#ifdef CONFIG_ACPI + struct xen_hvm_param a; + int interrupt, trigger, polarity; + + a.domid = DOMID_SELF; + a.index = HVM_PARAM_CALLBACK_IRQ; + + if (HYPERVISOR_hvm_op(HVMOP_get_param, &a) + || (a.value >> 56) != HVM_PARAM_CALLBACK_TYPE_PPI) { + xen_events_irq = 0; + return; + } + + interrupt = a.value & 0xff; + trigger = ((a.value >> 8) & 0x1) ? ACPI_EDGE_SENSITIVE + : ACPI_LEVEL_SENSITIVE; + polarity = ((a.value >> 8) & 0x2) ? ACPI_ACTIVE_LOW + : ACPI_ACTIVE_HIGH; + xen_events_irq = acpi_register_gsi(NULL, interrupt, trigger, polarity); +#endif +} + +static void __init xen_dt_guest_init(void) +{ + struct device_node *xen_node; + + xen_node = of_find_compatible_node(NULL, NULL, "xen,xen"); + if (!xen_node) { + pr_err("Xen support was detected before, but it has disappeared\n"); + return; + } + + xen_events_irq = irq_of_parse_and_map(xen_node, 0); +} + static int __init xen_guest_init(void) { struct xen_add_to_physmap xatp; struct shared_info *shared_info_page = NULL; - struct resource res; - phys_addr_t grant_frames; + int cpu; if (!xen_domain()) return 0; - if (of_address_to_resource(xen_node, GRANT_TABLE_PHYSADDR, &res)) { - pr_err("Xen grant table base address not found\n"); - return -ENODEV; - } - grant_frames = res.start; + if (!acpi_disabled) + xen_acpi_guest_init(); + else + xen_dt_guest_init(); - xen_events_irq = irq_of_parse_and_map(xen_node, 0); if (!xen_events_irq) { pr_err("Xen event channel interrupt not found\n"); return -ENODEV; } + /* + * The fdt parsing codes have set EFI_RUNTIME_SERVICES if Xen EFI + * parameters are found. Force enable runtime services. + */ + if (efi_enabled(EFI_RUNTIME_SERVICES)) + xen_efi_runtime_setup(); + shared_info_page = (struct shared_info *)get_zeroed_page(GFP_KERNEL); if (!shared_info_page) { @@ -328,7 +377,14 @@ static int __init xen_guest_init(void) if (xen_vcpu_info == NULL) return -ENOMEM; - if (gnttab_setup_auto_xlat_frames(grant_frames)) { + /* Direct vCPU id mapping for ARM guests. */ + for_each_possible_cpu(cpu) + per_cpu(xen_vcpu_id, cpu) = cpu; + + xen_auto_xlat_grant_frames.count = gnttab_max_grant_frames(); + if (xen_xlate_map_ballooned_pages(&xen_auto_xlat_grant_frames.pfn, + &xen_auto_xlat_grant_frames.vaddr, + xen_auto_xlat_grant_frames.count)) { free_percpu(xen_vcpu_info); return -ENOMEM; } @@ -351,16 +407,14 @@ static int __init xen_guest_init(void) return -EINVAL; } - xen_percpu_init(); + xen_time_setup_guest(); - register_cpu_notifier(&xen_cpu_notifier); - - pv_time_ops.steal_clock = xen_stolen_accounting; - static_key_slow_inc(¶virt_steal_enabled); if (xen_initial_domain()) pvclock_gtod_register_notifier(&xen_pvclock_gtod_notifier); - return 0; + return cpuhp_setup_state(CPUHP_AP_ARM_XEN_STARTING, + "AP_ARM_XEN_STARTING", xen_starting_cpu, + xen_dying_cpu); } early_initcall(xen_guest_init); @@ -403,4 +457,5 @@ EXPORT_SYMBOL_GPL(HYPERVISOR_vcpu_op); EXPORT_SYMBOL_GPL(HYPERVISOR_tmem_op); EXPORT_SYMBOL_GPL(HYPERVISOR_platform_op); EXPORT_SYMBOL_GPL(HYPERVISOR_multicall); +EXPORT_SYMBOL_GPL(HYPERVISOR_vm_assist); EXPORT_SYMBOL_GPL(privcmd_call); diff --git a/arch/arm/xen/hypercall.S b/arch/arm/xen/hypercall.S index 9a36f4f49..a648dfc3b 100644 --- a/arch/arm/xen/hypercall.S +++ b/arch/arm/xen/hypercall.S @@ -91,6 +91,7 @@ HYPERCALL3(vcpu_op); HYPERCALL1(tmem_op); HYPERCALL1(platform_op_raw); HYPERCALL2(multicall); +HYPERCALL2(vm_assist); ENTRY(privcmd_call) stmdb sp!, {r4} diff --git a/arch/arm/xen/mm.c b/arch/arm/xen/mm.c index c5f9a9e3d..d062f08f5 100644 --- a/arch/arm/xen/mm.c +++ b/arch/arm/xen/mm.c @@ -98,11 +98,11 @@ static void __xen_dma_page_cpu_to_dev(struct device *hwdev, dma_addr_t handle, void __xen_dma_map_page(struct device *hwdev, struct page *page, dma_addr_t dev_addr, unsigned long offset, size_t size, - enum dma_data_direction dir, struct dma_attrs *attrs) + enum dma_data_direction dir, unsigned long attrs) { if (is_device_dma_coherent(hwdev)) return; - if (dma_get_attr(DMA_ATTR_SKIP_CPU_SYNC, attrs)) + if (attrs & DMA_ATTR_SKIP_CPU_SYNC) return; __xen_dma_page_cpu_to_dev(hwdev, dev_addr, size, dir); @@ -110,12 +110,12 @@ void __xen_dma_map_page(struct device *hwdev, struct page *page, void __xen_dma_unmap_page(struct device *hwdev, dma_addr_t handle, size_t size, enum dma_data_direction dir, - struct dma_attrs *attrs) + unsigned long attrs) { if (is_device_dma_coherent(hwdev)) return; - if (dma_get_attr(DMA_ATTR_SKIP_CPU_SYNC, attrs)) + if (attrs & DMA_ATTR_SKIP_CPU_SYNC) return; __xen_dma_page_dev_to_cpu(hwdev, handle, size, dir); |