diff options
Diffstat (limited to 'arch/avr32/mach-at32ap/include/mach')
| -rw-r--r-- | arch/avr32/mach-at32ap/include/mach/at32ap700x.h | 245 | ||||
| -rw-r--r-- | arch/avr32/mach-at32ap/include/mach/board.h | 115 | ||||
| -rw-r--r-- | arch/avr32/mach-at32ap/include/mach/chip.h | 19 | ||||
| -rw-r--r-- | arch/avr32/mach-at32ap/include/mach/cpu.h | 23 | ||||
| -rw-r--r-- | arch/avr32/mach-at32ap/include/mach/gpio.h | 45 | ||||
| -rw-r--r-- | arch/avr32/mach-at32ap/include/mach/hmatrix.h | 55 | ||||
| -rw-r--r-- | arch/avr32/mach-at32ap/include/mach/init.h | 18 | ||||
| -rw-r--r-- | arch/avr32/mach-at32ap/include/mach/io.h | 38 | ||||
| -rw-r--r-- | arch/avr32/mach-at32ap/include/mach/irq.h | 14 | ||||
| -rw-r--r-- | arch/avr32/mach-at32ap/include/mach/pm.h | 27 | ||||
| -rw-r--r-- | arch/avr32/mach-at32ap/include/mach/portmux.h | 30 | ||||
| -rw-r--r-- | arch/avr32/mach-at32ap/include/mach/smc.h | 113 | ||||
| -rw-r--r-- | arch/avr32/mach-at32ap/include/mach/sram.h | 30 |
13 files changed, 772 insertions, 0 deletions
diff --git a/arch/avr32/mach-at32ap/include/mach/at32ap700x.h b/arch/avr32/mach-at32ap/include/mach/at32ap700x.h new file mode 100644 index 000000000..b9222bf89 --- /dev/null +++ b/arch/avr32/mach-at32ap/include/mach/at32ap700x.h @@ -0,0 +1,245 @@ +/* + * Pin definitions for AT32AP7000. + * + * Copyright (C) 2006 Atmel Corporation + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#ifndef __ASM_ARCH_AT32AP700X_H__ +#define __ASM_ARCH_AT32AP700X_H__ + +#define GPIO_PERIPH_A 0 +#define GPIO_PERIPH_B 1 + +/* + * Pin numbers identifying specific GPIO pins on the chip. They can + * also be converted to IRQ numbers by passing them through + * gpio_to_irq(). + */ +#define GPIO_PIOA_BASE (0) +#define GPIO_PIOB_BASE (GPIO_PIOA_BASE + 32) +#define GPIO_PIOC_BASE (GPIO_PIOB_BASE + 32) +#define GPIO_PIOD_BASE (GPIO_PIOC_BASE + 32) +#define GPIO_PIOE_BASE (GPIO_PIOD_BASE + 32) + +#define GPIO_PIN_PA(N) (GPIO_PIOA_BASE + (N)) +#define GPIO_PIN_PB(N) (GPIO_PIOB_BASE + (N)) +#define GPIO_PIN_PC(N) (GPIO_PIOC_BASE + (N)) +#define GPIO_PIN_PD(N) (GPIO_PIOD_BASE + (N)) +#define GPIO_PIN_PE(N) (GPIO_PIOE_BASE + (N)) + + +/* + * DMAC peripheral hardware handshaking interfaces, used with dw_dmac + */ +#define DMAC_MCI_RX 0 +#define DMAC_MCI_TX 1 +#define DMAC_DAC_TX 2 +#define DMAC_AC97_A_RX 3 +#define DMAC_AC97_A_TX 4 +#define DMAC_AC97_B_RX 5 +#define DMAC_AC97_B_TX 6 +#define DMAC_DMAREQ_0 7 +#define DMAC_DMAREQ_1 8 +#define DMAC_DMAREQ_2 9 +#define DMAC_DMAREQ_3 10 + +/* HSB master IDs */ +#define HMATRIX_MASTER_CPU_DCACHE 0 +#define HMATRIX_MASTER_CPU_ICACHE 1 +#define HMATRIX_MASTER_PDC 2 +#define HMATRIX_MASTER_ISI 3 +#define HMATRIX_MASTER_USBA 4 +#define HMATRIX_MASTER_LCDC 5 +#define HMATRIX_MASTER_MACB0 6 +#define HMATRIX_MASTER_MACB1 7 +#define HMATRIX_MASTER_DMACA_M0 8 +#define HMATRIX_MASTER_DMACA_M1 9 + +/* HSB slave IDs */ +#define HMATRIX_SLAVE_SRAM0 0 +#define HMATRIX_SLAVE_SRAM1 1 +#define HMATRIX_SLAVE_PBA 2 +#define HMATRIX_SLAVE_PBB 3 +#define HMATRIX_SLAVE_EBI 4 +#define HMATRIX_SLAVE_USBA 5 +#define HMATRIX_SLAVE_LCDC 6 +#define HMATRIX_SLAVE_DMACA 7 + +/* Bits in HMATRIX SFR4 (EBI) */ +#define HMATRIX_EBI_SDRAM_ENABLE (1 << 1) +#define HMATRIX_EBI_NAND_ENABLE (1 << 3) +#define HMATRIX_EBI_CF0_ENABLE (1 << 4) +#define HMATRIX_EBI_CF1_ENABLE (1 << 5) +#define HMATRIX_EBI_PULLUP_DISABLE (1 << 8) + +/* + * Base addresses of controllers that may be accessed early by + * platform code. + */ +#define PM_BASE 0xfff00000 +#define HMATRIX_BASE 0xfff00800 +#define SDRAMC_BASE 0xfff03800 + +/* LCDC on port C */ +#define ATMEL_LCDC_PC_CC (1ULL << 19) +#define ATMEL_LCDC_PC_HSYNC (1ULL << 20) +#define ATMEL_LCDC_PC_PCLK (1ULL << 21) +#define ATMEL_LCDC_PC_VSYNC (1ULL << 22) +#define ATMEL_LCDC_PC_DVAL (1ULL << 23) +#define ATMEL_LCDC_PC_MODE (1ULL << 24) +#define ATMEL_LCDC_PC_PWR (1ULL << 25) +#define ATMEL_LCDC_PC_DATA0 (1ULL << 26) +#define ATMEL_LCDC_PC_DATA1 (1ULL << 27) +#define ATMEL_LCDC_PC_DATA2 (1ULL << 28) +#define ATMEL_LCDC_PC_DATA3 (1ULL << 29) +#define ATMEL_LCDC_PC_DATA4 (1ULL << 30) +#define ATMEL_LCDC_PC_DATA5 (1ULL << 31) + +/* LCDC on port D */ +#define ATMEL_LCDC_PD_DATA6 (1ULL << 0) +#define ATMEL_LCDC_PD_DATA7 (1ULL << 1) +#define ATMEL_LCDC_PD_DATA8 (1ULL << 2) +#define ATMEL_LCDC_PD_DATA9 (1ULL << 3) +#define ATMEL_LCDC_PD_DATA10 (1ULL << 4) +#define ATMEL_LCDC_PD_DATA11 (1ULL << 5) +#define ATMEL_LCDC_PD_DATA12 (1ULL << 6) +#define ATMEL_LCDC_PD_DATA13 (1ULL << 7) +#define ATMEL_LCDC_PD_DATA14 (1ULL << 8) +#define ATMEL_LCDC_PD_DATA15 (1ULL << 9) +#define ATMEL_LCDC_PD_DATA16 (1ULL << 10) +#define ATMEL_LCDC_PD_DATA17 (1ULL << 11) +#define ATMEL_LCDC_PD_DATA18 (1ULL << 12) +#define ATMEL_LCDC_PD_DATA19 (1ULL << 13) +#define ATMEL_LCDC_PD_DATA20 (1ULL << 14) +#define ATMEL_LCDC_PD_DATA21 (1ULL << 15) +#define ATMEL_LCDC_PD_DATA22 (1ULL << 16) +#define ATMEL_LCDC_PD_DATA23 (1ULL << 17) + +/* LCDC on port E */ +#define ATMEL_LCDC_PE_CC (1ULL << (32 + 0)) +#define ATMEL_LCDC_PE_DVAL (1ULL << (32 + 1)) +#define ATMEL_LCDC_PE_MODE (1ULL << (32 + 2)) +#define ATMEL_LCDC_PE_DATA0 (1ULL << (32 + 3)) +#define ATMEL_LCDC_PE_DATA1 (1ULL << (32 + 4)) +#define ATMEL_LCDC_PE_DATA2 (1ULL << (32 + 5)) +#define ATMEL_LCDC_PE_DATA3 (1ULL << (32 + 6)) +#define ATMEL_LCDC_PE_DATA4 (1ULL << (32 + 7)) +#define ATMEL_LCDC_PE_DATA8 (1ULL << (32 + 8)) +#define ATMEL_LCDC_PE_DATA9 (1ULL << (32 + 9)) +#define ATMEL_LCDC_PE_DATA10 (1ULL << (32 + 10)) +#define ATMEL_LCDC_PE_DATA11 (1ULL << (32 + 11)) +#define ATMEL_LCDC_PE_DATA12 (1ULL << (32 + 12)) +#define ATMEL_LCDC_PE_DATA16 (1ULL << (32 + 13)) +#define ATMEL_LCDC_PE_DATA17 (1ULL << (32 + 14)) +#define ATMEL_LCDC_PE_DATA18 (1ULL << (32 + 15)) +#define ATMEL_LCDC_PE_DATA19 (1ULL << (32 + 16)) +#define ATMEL_LCDC_PE_DATA20 (1ULL << (32 + 17)) +#define ATMEL_LCDC_PE_DATA21 (1ULL << (32 + 18)) + + +#define ATMEL_LCDC(PORT, PIN) (ATMEL_LCDC_##PORT##_##PIN) + + +#define ATMEL_LCDC_PRI_24B_DATA ( \ + ATMEL_LCDC(PC, DATA0) | ATMEL_LCDC(PC, DATA1) | \ + ATMEL_LCDC(PC, DATA2) | ATMEL_LCDC(PC, DATA3) | \ + ATMEL_LCDC(PC, DATA4) | ATMEL_LCDC(PC, DATA5) | \ + ATMEL_LCDC(PD, DATA6) | ATMEL_LCDC(PD, DATA7) | \ + ATMEL_LCDC(PD, DATA8) | ATMEL_LCDC(PD, DATA9) | \ + ATMEL_LCDC(PD, DATA10) | ATMEL_LCDC(PD, DATA11) | \ + ATMEL_LCDC(PD, DATA12) | ATMEL_LCDC(PD, DATA13) | \ + ATMEL_LCDC(PD, DATA14) | ATMEL_LCDC(PD, DATA15) | \ + ATMEL_LCDC(PD, DATA16) | ATMEL_LCDC(PD, DATA17) | \ + ATMEL_LCDC(PD, DATA18) | ATMEL_LCDC(PD, DATA19) | \ + ATMEL_LCDC(PD, DATA20) | ATMEL_LCDC(PD, DATA21) | \ + ATMEL_LCDC(PD, DATA22) | ATMEL_LCDC(PD, DATA23)) + +#define ATMEL_LCDC_ALT_24B_DATA ( \ + ATMEL_LCDC(PE, DATA0) | ATMEL_LCDC(PE, DATA1) | \ + ATMEL_LCDC(PE, DATA2) | ATMEL_LCDC(PE, DATA3) | \ + ATMEL_LCDC(PE, DATA4) | ATMEL_LCDC(PC, DATA5) | \ + ATMEL_LCDC(PD, DATA6) | ATMEL_LCDC(PD, DATA7) | \ + ATMEL_LCDC(PE, DATA8) | ATMEL_LCDC(PE, DATA9) | \ + ATMEL_LCDC(PE, DATA10) | ATMEL_LCDC(PE, DATA11) | \ + ATMEL_LCDC(PE, DATA12) | ATMEL_LCDC(PD, DATA13) | \ + ATMEL_LCDC(PD, DATA14) | ATMEL_LCDC(PD, DATA15) | \ + ATMEL_LCDC(PE, DATA16) | ATMEL_LCDC(PE, DATA17) | \ + ATMEL_LCDC(PE, DATA18) | ATMEL_LCDC(PE, DATA19) | \ + ATMEL_LCDC(PE, DATA20) | ATMEL_LCDC(PE, DATA21) | \ + ATMEL_LCDC(PD, DATA22) | ATMEL_LCDC(PD, DATA23)) + +#define ATMEL_LCDC_PRI_18B_DATA ( \ + ATMEL_LCDC(PC, DATA2) | ATMEL_LCDC(PC, DATA3) | \ + ATMEL_LCDC(PC, DATA4) | ATMEL_LCDC(PC, DATA5) | \ + ATMEL_LCDC(PD, DATA6) | ATMEL_LCDC(PD, DATA7) | \ + ATMEL_LCDC(PD, DATA10) | ATMEL_LCDC(PD, DATA11) | \ + ATMEL_LCDC(PD, DATA12) | ATMEL_LCDC(PD, DATA13) | \ + ATMEL_LCDC(PD, DATA14) | ATMEL_LCDC(PD, DATA15) | \ + ATMEL_LCDC(PD, DATA18) | ATMEL_LCDC(PD, DATA19) | \ + ATMEL_LCDC(PD, DATA20) | ATMEL_LCDC(PD, DATA21) | \ + ATMEL_LCDC(PD, DATA22) | ATMEL_LCDC(PD, DATA23)) + +#define ATMEL_LCDC_ALT_18B_DATA ( \ + ATMEL_LCDC(PE, DATA2) | ATMEL_LCDC(PE, DATA3) | \ + ATMEL_LCDC(PE, DATA4) | ATMEL_LCDC(PC, DATA5) | \ + ATMEL_LCDC(PD, DATA6) | ATMEL_LCDC(PD, DATA7) | \ + ATMEL_LCDC(PE, DATA10) | ATMEL_LCDC(PE, DATA11) | \ + ATMEL_LCDC(PE, DATA12) | ATMEL_LCDC(PD, DATA13) | \ + ATMEL_LCDC(PD, DATA14) | ATMEL_LCDC(PD, DATA15) | \ + ATMEL_LCDC(PE, DATA18) | ATMEL_LCDC(PE, DATA19) | \ + ATMEL_LCDC(PE, DATA20) | ATMEL_LCDC(PE, DATA21) | \ + ATMEL_LCDC(PD, DATA22) | ATMEL_LCDC(PD, DATA23)) + +#define ATMEL_LCDC_PRI_15B_DATA ( \ + ATMEL_LCDC(PC, DATA3) | ATMEL_LCDC(PC, DATA4) | \ + ATMEL_LCDC(PC, DATA5) | ATMEL_LCDC(PD, DATA6) | \ + ATMEL_LCDC(PD, DATA7) | \ + ATMEL_LCDC(PD, DATA11) | ATMEL_LCDC(PD, DATA12) | \ + ATMEL_LCDC(PD, DATA13) | ATMEL_LCDC(PD, DATA14) | \ + ATMEL_LCDC(PD, DATA15) | \ + ATMEL_LCDC(PD, DATA19) | ATMEL_LCDC(PD, DATA20) | \ + ATMEL_LCDC(PD, DATA21) | ATMEL_LCDC(PD, DATA22) | \ + ATMEL_LCDC(PD, DATA23)) + +#define ATMEL_LCDC_ALT_15B_DATA ( \ + ATMEL_LCDC(PE, DATA3) | ATMEL_LCDC(PE, DATA4) | \ + ATMEL_LCDC(PC, DATA5) | ATMEL_LCDC(PD, DATA6) | \ + ATMEL_LCDC(PD, DATA7) | \ + ATMEL_LCDC(PE, DATA11) | ATMEL_LCDC(PE, DATA12) | \ + ATMEL_LCDC(PD, DATA13) | ATMEL_LCDC(PD, DATA14) | \ + ATMEL_LCDC(PD, DATA15) | \ + ATMEL_LCDC(PE, DATA19) | ATMEL_LCDC(PE, DATA20) | \ + ATMEL_LCDC(PE, DATA21) | ATMEL_LCDC(PD, DATA22) | \ + ATMEL_LCDC(PD, DATA23)) + +#define ATMEL_LCDC_PRI_CONTROL ( \ + ATMEL_LCDC(PC, CC) | ATMEL_LCDC(PC, DVAL) | \ + ATMEL_LCDC(PC, MODE) | ATMEL_LCDC(PC, PWR)) + +#define ATMEL_LCDC_ALT_CONTROL ( \ + ATMEL_LCDC(PE, CC) | ATMEL_LCDC(PE, DVAL) | \ + ATMEL_LCDC(PE, MODE) | ATMEL_LCDC(PC, PWR)) + +#define ATMEL_LCDC_CONTROL ( \ + ATMEL_LCDC(PC, HSYNC) | ATMEL_LCDC(PC, VSYNC) | \ + ATMEL_LCDC(PC, PCLK)) + +#define ATMEL_LCDC_PRI_24BIT (ATMEL_LCDC_CONTROL | ATMEL_LCDC_PRI_24B_DATA) + +#define ATMEL_LCDC_ALT_24BIT (ATMEL_LCDC_CONTROL | ATMEL_LCDC_ALT_24B_DATA) + +#define ATMEL_LCDC_PRI_18BIT (ATMEL_LCDC_CONTROL | ATMEL_LCDC_PRI_18B_DATA) + +#define ATMEL_LCDC_ALT_18BIT (ATMEL_LCDC_CONTROL | ATMEL_LCDC_ALT_18B_DATA) + +#define ATMEL_LCDC_PRI_15BIT (ATMEL_LCDC_CONTROL | ATMEL_LCDC_PRI_15B_DATA) + +#define ATMEL_LCDC_ALT_15BIT (ATMEL_LCDC_CONTROL | ATMEL_LCDC_ALT_15B_DATA) + +/* Bitmask for all EBI data (D16..D31) pins on port E */ +#define ATMEL_EBI_PE_DATA_ALL (0x0000FFFF) + +#endif /* __ASM_ARCH_AT32AP700X_H__ */ diff --git a/arch/avr32/mach-at32ap/include/mach/board.h b/arch/avr32/mach-at32ap/include/mach/board.h new file mode 100644 index 000000000..f1a316d52 --- /dev/null +++ b/arch/avr32/mach-at32ap/include/mach/board.h @@ -0,0 +1,115 @@ +/* + * Platform data definitions. + */ +#ifndef __ASM_ARCH_BOARD_H +#define __ASM_ARCH_BOARD_H + +#include <linux/types.h> +#include <linux/serial.h> +#include <linux/platform_data/macb.h> +#include <linux/platform_data/atmel.h> + +#define GPIO_PIN_NONE (-1) + +/* + * Clock rates for various on-board oscillators. The number of entries + * in this array is chip-dependent. + */ +extern unsigned long at32_board_osc_rates[]; + +/* + * This used to add essential system devices, but this is now done + * automatically. Please don't use it in new board code. + */ +static inline void __deprecated at32_add_system_devices(void) +{ + +} + +extern struct platform_device *atmel_default_console_device; + +/* Flags for selecting USART extra pins */ +#define ATMEL_USART_RTS 0x01 +#define ATMEL_USART_CTS 0x02 +#define ATMEL_USART_CLK 0x04 + +void at32_map_usart(unsigned int hw_id, unsigned int line, int flags); +struct platform_device *at32_add_device_usart(unsigned int id); + +struct platform_device * +at32_add_device_eth(unsigned int id, struct macb_platform_data *data); + +struct spi_board_info; +struct platform_device * +at32_add_device_spi(unsigned int id, struct spi_board_info *b, unsigned int n); +void at32_spi_setup_slaves(unsigned int bus_num, struct spi_board_info *b, unsigned int n); + +struct atmel_lcdfb_pdata; +struct platform_device * +at32_add_device_lcdc(unsigned int id, struct atmel_lcdfb_pdata *data, + unsigned long fbmem_start, unsigned long fbmem_len, + u64 pin_mask); + +struct usba_platform_data; +struct platform_device * +at32_add_device_usba(unsigned int id, struct usba_platform_data *data); + +struct ide_platform_data { + u8 cs; +}; +struct platform_device * +at32_add_device_ide(unsigned int id, unsigned int extint, + struct ide_platform_data *data); + +/* mask says which PWM channels to mux */ +struct platform_device *at32_add_device_pwm(u32 mask); + +/* depending on what's hooked up, not all SSC pins will be used */ +#define ATMEL_SSC_TK 0x01 +#define ATMEL_SSC_TF 0x02 +#define ATMEL_SSC_TD 0x04 +#define ATMEL_SSC_TX (ATMEL_SSC_TK | ATMEL_SSC_TF | ATMEL_SSC_TD) + +#define ATMEL_SSC_RK 0x10 +#define ATMEL_SSC_RF 0x20 +#define ATMEL_SSC_RD 0x40 +#define ATMEL_SSC_RX (ATMEL_SSC_RK | ATMEL_SSC_RF | ATMEL_SSC_RD) + +struct platform_device * +at32_add_device_ssc(unsigned int id, unsigned int flags); + +struct i2c_board_info; +struct platform_device *at32_add_device_twi(unsigned int id, + struct i2c_board_info *b, + unsigned int n); + +struct mci_platform_data; +struct platform_device * +at32_add_device_mci(unsigned int id, struct mci_platform_data *data); + +struct ac97c_platform_data; +struct platform_device * +at32_add_device_ac97c(unsigned int id, struct ac97c_platform_data *data, + unsigned int flags); + +struct atmel_abdac_pdata; +struct platform_device * +at32_add_device_abdac(unsigned int id, struct atmel_abdac_pdata *data); + +struct platform_device *at32_add_device_psif(unsigned int id); + +struct cf_platform_data { + int detect_pin; + int reset_pin; + int vcc_pin; + int ready_pin; + u8 cs; +}; +struct platform_device * +at32_add_device_cf(unsigned int id, unsigned int extint, + struct cf_platform_data *data); + +struct platform_device * +at32_add_device_nand(unsigned int id, struct atmel_nand_data *data); + +#endif /* __ASM_ARCH_BOARD_H */ diff --git a/arch/avr32/mach-at32ap/include/mach/chip.h b/arch/avr32/mach-at32ap/include/mach/chip.h new file mode 100644 index 000000000..5efca6da6 --- /dev/null +++ b/arch/avr32/mach-at32ap/include/mach/chip.h @@ -0,0 +1,19 @@ +/* + * AVR32 chip-specific definitions + * + * Copyright (C) 2008 Atmel Corporation + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#ifndef __ASM_AVR32_ARCH_CHIP_H__ +#define __ASM_AVR32_ARCH_CHIP_H__ + +#if defined(CONFIG_CPU_AT32AP700X) +# include <mach/at32ap700x.h> +#else +# error Unknown chip type selected +#endif + +#endif /* __ASM_AVR32_ARCH_CHIP_H__ */ diff --git a/arch/avr32/mach-at32ap/include/mach/cpu.h b/arch/avr32/mach-at32ap/include/mach/cpu.h new file mode 100644 index 000000000..4181086f4 --- /dev/null +++ b/arch/avr32/mach-at32ap/include/mach/cpu.h @@ -0,0 +1,23 @@ +/* + * AVR32 CPU identification + * + * Copyright (C) 2007 Atmel Corporation + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#ifndef __ASM_ARCH_CPU_H +#define __ASM_ARCH_CPU_H + +/* + * Only AT32AP7000 is defined for now. We can identify the specific + * chip at runtime, but I'm not sure if it's really worth it. + */ +#ifdef CONFIG_CPU_AT32AP700X +# define cpu_is_at32ap7000() (1) +#else +# define cpu_is_at32ap7000() (0) +#endif + +#endif /* __ASM_ARCH_CPU_H */ diff --git a/arch/avr32/mach-at32ap/include/mach/gpio.h b/arch/avr32/mach-at32ap/include/mach/gpio.h new file mode 100644 index 000000000..0180f584e --- /dev/null +++ b/arch/avr32/mach-at32ap/include/mach/gpio.h @@ -0,0 +1,45 @@ +#ifndef __ASM_AVR32_ARCH_GPIO_H +#define __ASM_AVR32_ARCH_GPIO_H + +#include <linux/compiler.h> +#include <asm/irq.h> + + +/* Some GPIO chips can manage IRQs; some can't. The exact numbers can + * be changed if needed, but for the moment they're not configurable. + */ +#define ARCH_NR_GPIOS (NR_GPIO_IRQS + 2 * 32) + + +/* Arch-neutral GPIO API, supporting both "native" and external GPIOs. */ +#include <asm-generic/gpio.h> + +static inline int gpio_get_value(unsigned int gpio) +{ + return __gpio_get_value(gpio); +} + +static inline void gpio_set_value(unsigned int gpio, int value) +{ + __gpio_set_value(gpio, value); +} + +static inline int gpio_cansleep(unsigned int gpio) +{ + return __gpio_cansleep(gpio); +} + + +static inline int gpio_to_irq(unsigned int gpio) +{ + if (gpio < NR_GPIO_IRQS) + return gpio + GPIO_IRQ_BASE; + return -EINVAL; +} + +static inline int irq_to_gpio(unsigned int irq) +{ + return irq - GPIO_IRQ_BASE; +} + +#endif /* __ASM_AVR32_ARCH_GPIO_H */ diff --git a/arch/avr32/mach-at32ap/include/mach/hmatrix.h b/arch/avr32/mach-at32ap/include/mach/hmatrix.h new file mode 100644 index 000000000..7a368f227 --- /dev/null +++ b/arch/avr32/mach-at32ap/include/mach/hmatrix.h @@ -0,0 +1,55 @@ +/* + * High-Speed Bus Matrix configuration registers + * + * Copyright (C) 2008 Atmel Corporation + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#ifndef __HMATRIX_H +#define __HMATRIX_H + +extern struct clk at32_hmatrix_clk; + +void hmatrix_write_reg(unsigned long offset, u32 value); +u32 hmatrix_read_reg(unsigned long offset); + +void hmatrix_sfr_set_bits(unsigned int slave_id, u32 mask); +void hmatrix_sfr_clear_bits(unsigned int slave_id, u32 mask); + +/* Master Configuration register */ +#define HMATRIX_MCFG(m) (0x0000 + 4 * (m)) +/* Undefined length burst limit */ +# define HMATRIX_MCFG_ULBT_INFINITE 0 /* Infinite length */ +# define HMATRIX_MCFG_ULBT_SINGLE 1 /* Single Access */ +# define HMATRIX_MCFG_ULBT_FOUR_BEAT 2 /* Four beat */ +# define HMATRIX_MCFG_ULBT_EIGHT_BEAT 3 /* Eight beat */ +# define HMATRIX_MCFG_ULBT_SIXTEEN_BEAT 4 /* Sixteen beat */ + +/* Slave Configuration register */ +#define HMATRIX_SCFG(s) (0x0040 + 4 * (s)) +# define HMATRIX_SCFG_SLOT_CYCLE(x) ((x) << 0) /* Max burst cycles */ +# define HMATRIX_SCFG_DEFMSTR_NONE ( 0 << 16) /* No default master */ +# define HMATRIX_SCFG_DEFMSTR_LAST ( 1 << 16) /* Last def master */ +# define HMATRIX_SCFG_DEFMSTR_FIXED ( 2 << 16) /* Fixed def master */ +# define HMATRIX_SCFG_FIXED_DEFMSTR(m) ((m) << 18) /* Fixed master ID */ +# define HMATRIX_SCFG_ARBT_ROUND_ROBIN ( 0 << 24) /* RR arbitration */ +# define HMATRIX_SCFG_ARBT_FIXED_PRIO ( 1 << 24) /* Fixed priority */ + +/* Slave Priority register A (master 0..7) */ +#define HMATRIX_PRAS(s) (0x0080 + 8 * (s)) +# define HMATRIX_PRAS_PRIO(m, p) ((p) << ((m) * 4)) + +/* Slave Priority register A (master 8..15) */ +#define HMATRIX_PRBS(s) (0x0084 + 8 * (s)) +# define HMATRIX_PRBS_PRIO(m, p) ((p) << (((m) - 8) * 4)) + +/* Master Remap Control Register */ +#define HMATRIX_MRCR 0x0100 +# define HMATRIX_MRCR_REMAP(m) ( 1 << (m)) /* Remap master m */ + +/* Special Function Register. Bit definitions are chip-specific */ +#define HMATRIX_SFR(s) (0x0110 + 4 * (s)) + +#endif /* __HMATRIX_H */ diff --git a/arch/avr32/mach-at32ap/include/mach/init.h b/arch/avr32/mach-at32ap/include/mach/init.h new file mode 100644 index 000000000..bc40e3d46 --- /dev/null +++ b/arch/avr32/mach-at32ap/include/mach/init.h @@ -0,0 +1,18 @@ +/* + * AT32AP platform initialization calls. + * + * Copyright (C) 2006 Atmel Corporation + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#ifndef __ASM_AVR32_AT32AP_INIT_H__ +#define __ASM_AVR32_AT32AP_INIT_H__ + +void setup_platform(void); +void setup_board(void); + +void at32_setup_serial_console(unsigned int usart_id); + +#endif /* __ASM_AVR32_AT32AP_INIT_H__ */ diff --git a/arch/avr32/mach-at32ap/include/mach/io.h b/arch/avr32/mach-at32ap/include/mach/io.h new file mode 100644 index 000000000..22ea79b74 --- /dev/null +++ b/arch/avr32/mach-at32ap/include/mach/io.h @@ -0,0 +1,38 @@ +#ifndef __ASM_AVR32_ARCH_AT32AP_IO_H +#define __ASM_AVR32_ARCH_AT32AP_IO_H + +#include <linux/swab.h> + +#if defined(CONFIG_AP700X_32_BIT_SMC) +# define __swizzle_addr_b(addr) (addr ^ 3UL) +# define __swizzle_addr_w(addr) (addr ^ 2UL) +# define __swizzle_addr_l(addr) (addr) +# define ioswabb(a, x) (x) +# define ioswabw(a, x) (x) +# define ioswabl(a, x) (x) +# define __mem_ioswabb(a, x) (x) +# define __mem_ioswabw(a, x) swab16(x) +# define __mem_ioswabl(a, x) swab32(x) +#elif defined(CONFIG_AP700X_16_BIT_SMC) +# define __swizzle_addr_b(addr) (addr ^ 1UL) +# define __swizzle_addr_w(addr) (addr) +# define __swizzle_addr_l(addr) (addr) +# define ioswabb(a, x) (x) +# define ioswabw(a, x) (x) +# define ioswabl(a, x) swahw32(x) +# define __mem_ioswabb(a, x) (x) +# define __mem_ioswabw(a, x) swab16(x) +# define __mem_ioswabl(a, x) swahb32(x) +#else +# define __swizzle_addr_b(addr) (addr) +# define __swizzle_addr_w(addr) (addr) +# define __swizzle_addr_l(addr) (addr) +# define ioswabb(a, x) (x) +# define ioswabw(a, x) swab16(x) +# define ioswabl(a, x) swab32(x) +# define __mem_ioswabb(a, x) (x) +# define __mem_ioswabw(a, x) (x) +# define __mem_ioswabl(a, x) (x) +#endif + +#endif /* __ASM_AVR32_ARCH_AT32AP_IO_H */ diff --git a/arch/avr32/mach-at32ap/include/mach/irq.h b/arch/avr32/mach-at32ap/include/mach/irq.h new file mode 100644 index 000000000..608e35036 --- /dev/null +++ b/arch/avr32/mach-at32ap/include/mach/irq.h @@ -0,0 +1,14 @@ +#ifndef __ASM_AVR32_ARCH_IRQ_H +#define __ASM_AVR32_ARCH_IRQ_H + +#define EIM_IRQ_BASE NR_INTERNAL_IRQS +#define NR_EIM_IRQS 32 +#define AT32_EXTINT(n) (EIM_IRQ_BASE + (n)) + +#define GPIO_IRQ_BASE (EIM_IRQ_BASE + NR_EIM_IRQS) +#define NR_GPIO_CTLR (5 /*internal*/ + 1 /*external*/) +#define NR_GPIO_IRQS (NR_GPIO_CTLR * 32) + +#define NR_IRQS (GPIO_IRQ_BASE + NR_GPIO_IRQS) + +#endif /* __ASM_AVR32_ARCH_IRQ_H */ diff --git a/arch/avr32/mach-at32ap/include/mach/pm.h b/arch/avr32/mach-at32ap/include/mach/pm.h new file mode 100644 index 000000000..f29ff2cd2 --- /dev/null +++ b/arch/avr32/mach-at32ap/include/mach/pm.h @@ -0,0 +1,27 @@ +/* + * AVR32 AP Power Management. + * + * Copyright (C) 2008 Atmel Corporation + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#ifndef __ASM_AVR32_ARCH_PM_H +#define __ASM_AVR32_ARCH_PM_H + +/* Possible arguments to the "sleep" instruction */ +#define CPU_SLEEP_IDLE 0 +#define CPU_SLEEP_FROZEN 1 +#define CPU_SLEEP_STANDBY 2 +#define CPU_SLEEP_STOP 3 +#define CPU_SLEEP_STATIC 5 + +#ifndef __ASSEMBLY__ +extern void cpu_enter_idle(void); +extern void cpu_enter_standby(unsigned long sdramc_base); + +void intc_set_suspend_handler(unsigned long offset); +#endif + +#endif /* __ASM_AVR32_ARCH_PM_H */ diff --git a/arch/avr32/mach-at32ap/include/mach/portmux.h b/arch/avr32/mach-at32ap/include/mach/portmux.h new file mode 100644 index 000000000..4873024e3 --- /dev/null +++ b/arch/avr32/mach-at32ap/include/mach/portmux.h @@ -0,0 +1,30 @@ +/* + * AT32 portmux interface. + * + * Copyright (C) 2006 Atmel Corporation + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#ifndef __ASM_ARCH_PORTMUX_H__ +#define __ASM_ARCH_PORTMUX_H__ + +/* + * Set up pin multiplexing, called from board init only. + * + * The following flags determine the initial state of the pin. + */ +#define AT32_GPIOF_PULLUP 0x00000001 /* (not-OUT) Enable pull-up */ +#define AT32_GPIOF_OUTPUT 0x00000002 /* (OUT) Enable output driver */ +#define AT32_GPIOF_HIGH 0x00000004 /* (OUT) Set output high */ +#define AT32_GPIOF_DEGLITCH 0x00000008 /* (IN) Filter glitches */ +#define AT32_GPIOF_MULTIDRV 0x00000010 /* Enable multidriver option */ + +void at32_select_periph(unsigned int port, unsigned int pin, + unsigned int periph, unsigned long flags); +void at32_select_gpio(unsigned int pin, unsigned long flags); +void at32_deselect_pin(unsigned int pin); +void at32_reserve_pin(unsigned int port, u32 pin_mask); + +#endif /* __ASM_ARCH_PORTMUX_H__ */ diff --git a/arch/avr32/mach-at32ap/include/mach/smc.h b/arch/avr32/mach-at32ap/include/mach/smc.h new file mode 100644 index 000000000..c98eea44a --- /dev/null +++ b/arch/avr32/mach-at32ap/include/mach/smc.h @@ -0,0 +1,113 @@ +/* + * Static Memory Controller for AT32 chips + * + * Copyright (C) 2006 Atmel Corporation + * + * Inspired by the OMAP2 General-Purpose Memory Controller interface + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#ifndef __ARCH_AT32AP_SMC_H +#define __ARCH_AT32AP_SMC_H + +/* + * All timing parameters are in nanoseconds. + */ +struct smc_timing { + /* Delay from address valid to assertion of given strobe */ + int ncs_read_setup; + int nrd_setup; + int ncs_write_setup; + int nwe_setup; + + /* Pulse length of given strobe */ + int ncs_read_pulse; + int nrd_pulse; + int ncs_write_pulse; + int nwe_pulse; + + /* Total cycle length of given operation */ + int read_cycle; + int write_cycle; + + /* Minimal recovery times, will extend cycle if needed */ + int ncs_read_recover; + int nrd_recover; + int ncs_write_recover; + int nwe_recover; +}; + +/* + * All timing parameters are in clock cycles. + */ +struct smc_config { + + /* Delay from address valid to assertion of given strobe */ + u8 ncs_read_setup; + u8 nrd_setup; + u8 ncs_write_setup; + u8 nwe_setup; + + /* Pulse length of given strobe */ + u8 ncs_read_pulse; + u8 nrd_pulse; + u8 ncs_write_pulse; + u8 nwe_pulse; + + /* Total cycle length of given operation */ + u8 read_cycle; + u8 write_cycle; + + /* Bus width in bytes */ + u8 bus_width; + + /* + * 0: Data is sampled on rising edge of NCS + * 1: Data is sampled on rising edge of NRD + */ + unsigned int nrd_controlled:1; + + /* + * 0: Data is driven on falling edge of NCS + * 1: Data is driven on falling edge of NWR + */ + unsigned int nwe_controlled:1; + + /* + * 0: NWAIT is disabled + * 1: Reserved + * 2: NWAIT is frozen mode + * 3: NWAIT in ready mode + */ + unsigned int nwait_mode:2; + + /* + * 0: Byte select access type + * 1: Byte write access type + */ + unsigned int byte_write:1; + + /* + * Number of clock cycles before data is released after + * the rising edge of the read controlling signal + * + * Total cycles from SMC is tdf_cycles + 1 + */ + unsigned int tdf_cycles:4; + + /* + * 0: TDF optimization disabled + * 1: TDF optimization enabled + */ + unsigned int tdf_mode:1; +}; + +extern void smc_set_timing(struct smc_config *config, + const struct smc_timing *timing); + +extern int smc_set_configuration(int cs, const struct smc_config *config); +extern struct smc_config *smc_get_configuration(int cs); + +#endif /* __ARCH_AT32AP_SMC_H */ diff --git a/arch/avr32/mach-at32ap/include/mach/sram.h b/arch/avr32/mach-at32ap/include/mach/sram.h new file mode 100644 index 000000000..4838dae76 --- /dev/null +++ b/arch/avr32/mach-at32ap/include/mach/sram.h @@ -0,0 +1,30 @@ +/* + * Simple SRAM allocator + * + * Copyright (C) 2008 Atmel Corporation + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#ifndef __ASM_AVR32_ARCH_SRAM_H +#define __ASM_AVR32_ARCH_SRAM_H + +#include <linux/genalloc.h> + +extern struct gen_pool *sram_pool; + +static inline unsigned long sram_alloc(size_t len) +{ + if (!sram_pool) + return 0UL; + + return gen_pool_alloc(sram_pool, len); +} + +static inline void sram_free(unsigned long addr, size_t len) +{ + return gen_pool_free(sram_pool, addr, len); +} + +#endif /* __ASM_AVR32_ARCH_SRAM_H */ |