diff options
Diffstat (limited to 'arch/avr32/mach-at32ap')
31 files changed, 6106 insertions, 0 deletions
diff --git a/arch/avr32/mach-at32ap/Kconfig b/arch/avr32/mach-at32ap/Kconfig new file mode 100644 index 000000000..a7bbcc820 --- /dev/null +++ b/arch/avr32/mach-at32ap/Kconfig @@ -0,0 +1,31 @@ +if PLATFORM_AT32AP + +menu "Atmel AVR32 AP options" + +choice + prompt "AT32AP700x static memory bus width" + depends on CPU_AT32AP700X + default AP700X_16_BIT_SMC + help + Define the width of the AP7000 external static memory interface. + This is used to determine how to mangle the address and/or data + when doing little-endian port access. + + The current code can only support a single external memory bus + width for all chip selects, excluding the flash (which is using + raw access and is thus not affected by any of this.) + +config AP700X_32_BIT_SMC + bool "32 bit" + +config AP700X_16_BIT_SMC + bool "16 bit" + +config AP700X_8_BIT_SMC + bool "8 bit" + +endchoice + +endmenu + +endif # PLATFORM_AT32AP diff --git a/arch/avr32/mach-at32ap/Makefile b/arch/avr32/mach-at32ap/Makefile new file mode 100644 index 000000000..fc09ec4bc --- /dev/null +++ b/arch/avr32/mach-at32ap/Makefile @@ -0,0 +1,8 @@ +obj-y += pdc.o clock.o intc.o extint.o pio.o hsmc.o +obj-y += hmatrix.o +obj-$(CONFIG_CPU_AT32AP700X) += at32ap700x.o pm-at32ap700x.o +obj-$(CONFIG_PM) += pm.o + +ifeq ($(CONFIG_PM_DEBUG),y) +CFLAGS_pm.o += -DDEBUG +endif diff --git a/arch/avr32/mach-at32ap/at32ap700x.c b/arch/avr32/mach-at32ap/at32ap700x.c new file mode 100644 index 000000000..1d8b14728 --- /dev/null +++ b/arch/avr32/mach-at32ap/at32ap700x.c @@ -0,0 +1,2360 @@ +/* + * Copyright (C) 2005-2006 Atmel Corporation + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#include <linux/clk.h> +#include <linux/delay.h> +#include <linux/platform_data/dma-dw.h> +#include <linux/fb.h> +#include <linux/init.h> +#include <linux/platform_device.h> +#include <linux/dma-mapping.h> +#include <linux/slab.h> +#include <linux/gpio.h> +#include <linux/spi/spi.h> +#include <linux/usb/atmel_usba_udc.h> + +#include <linux/platform_data/mmc-atmel-mci.h> +#include <linux/atmel-mci.h> + +#include <asm/io.h> +#include <asm/irq.h> + +#include <mach/at32ap700x.h> +#include <mach/board.h> +#include <mach/hmatrix.h> +#include <mach/portmux.h> +#include <mach/sram.h> + +#include <sound/atmel-abdac.h> +#include <sound/atmel-ac97c.h> + +#include <video/atmel_lcdc.h> + +#include "clock.h" +#include "pio.h" +#include "pm.h" + + +#define PBMEM(base) \ + { \ + .start = base, \ + .end = base + 0x3ff, \ + .flags = IORESOURCE_MEM, \ + } +#define IRQ(num) \ + { \ + .start = num, \ + .end = num, \ + .flags = IORESOURCE_IRQ, \ + } +#define NAMED_IRQ(num, _name) \ + { \ + .start = num, \ + .end = num, \ + .name = _name, \ + .flags = IORESOURCE_IRQ, \ + } + +/* REVISIT these assume *every* device supports DMA, but several + * don't ... tc, smc, pio, rtc, watchdog, pwm, ps2, and more. + */ +#define DEFINE_DEV(_name, _id) \ +static u64 _name##_id##_dma_mask = DMA_BIT_MASK(32); \ +static struct platform_device _name##_id##_device = { \ + .name = #_name, \ + .id = _id, \ + .dev = { \ + .dma_mask = &_name##_id##_dma_mask, \ + .coherent_dma_mask = DMA_BIT_MASK(32), \ + }, \ + .resource = _name##_id##_resource, \ + .num_resources = ARRAY_SIZE(_name##_id##_resource), \ +} +#define DEFINE_DEV_DATA(_name, _id) \ +static u64 _name##_id##_dma_mask = DMA_BIT_MASK(32); \ +static struct platform_device _name##_id##_device = { \ + .name = #_name, \ + .id = _id, \ + .dev = { \ + .dma_mask = &_name##_id##_dma_mask, \ + .platform_data = &_name##_id##_data, \ + .coherent_dma_mask = DMA_BIT_MASK(32), \ + }, \ + .resource = _name##_id##_resource, \ + .num_resources = ARRAY_SIZE(_name##_id##_resource), \ +} + +#define select_peripheral(port, pin_mask, periph, flags) \ + at32_select_periph(GPIO_##port##_BASE, pin_mask, \ + GPIO_##periph, flags) + +#define DEV_CLK(_name, devname, bus, _index) \ +static struct clk devname##_##_name = { \ + .name = #_name, \ + .dev = &devname##_device.dev, \ + .parent = &bus##_clk, \ + .mode = bus##_clk_mode, \ + .get_rate = bus##_clk_get_rate, \ + .index = _index, \ +} + +static DEFINE_SPINLOCK(pm_lock); + +static struct clk osc0; +static struct clk osc1; + +static unsigned long osc_get_rate(struct clk *clk) +{ + return at32_board_osc_rates[clk->index]; +} + +static unsigned long pll_get_rate(struct clk *clk, unsigned long control) +{ + unsigned long div, mul, rate; + + div = PM_BFEXT(PLLDIV, control) + 1; + mul = PM_BFEXT(PLLMUL, control) + 1; + + rate = clk->parent->get_rate(clk->parent); + rate = (rate + div / 2) / div; + rate *= mul; + + return rate; +} + +static long pll_set_rate(struct clk *clk, unsigned long rate, + u32 *pll_ctrl) +{ + unsigned long mul; + unsigned long mul_best_fit = 0; + unsigned long div; + unsigned long div_min; + unsigned long div_max; + unsigned long div_best_fit = 0; + unsigned long base; + unsigned long pll_in; + unsigned long actual = 0; + unsigned long rate_error; + unsigned long rate_error_prev = ~0UL; + u32 ctrl; + + /* Rate must be between 80 MHz and 200 Mhz. */ + if (rate < 80000000UL || rate > 200000000UL) + return -EINVAL; + + ctrl = PM_BF(PLLOPT, 4); + base = clk->parent->get_rate(clk->parent); + + /* PLL input frequency must be between 6 MHz and 32 MHz. */ + div_min = DIV_ROUND_UP(base, 32000000UL); + div_max = base / 6000000UL; + + if (div_max < div_min) + return -EINVAL; + + for (div = div_min; div <= div_max; div++) { + pll_in = (base + div / 2) / div; + mul = (rate + pll_in / 2) / pll_in; + + if (mul == 0) + continue; + + actual = pll_in * mul; + rate_error = abs(actual - rate); + + if (rate_error < rate_error_prev) { + mul_best_fit = mul; + div_best_fit = div; + rate_error_prev = rate_error; + } + + if (rate_error == 0) + break; + } + + if (div_best_fit == 0) + return -EINVAL; + + ctrl |= PM_BF(PLLMUL, mul_best_fit - 1); + ctrl |= PM_BF(PLLDIV, div_best_fit - 1); + ctrl |= PM_BF(PLLCOUNT, 16); + + if (clk->parent == &osc1) + ctrl |= PM_BIT(PLLOSC); + + *pll_ctrl = ctrl; + + return actual; +} + +static unsigned long pll0_get_rate(struct clk *clk) +{ + u32 control; + + control = pm_readl(PLL0); + + return pll_get_rate(clk, control); +} + +static void pll1_mode(struct clk *clk, int enabled) +{ + unsigned long timeout; + u32 status; + u32 ctrl; + + ctrl = pm_readl(PLL1); + + if (enabled) { + if (!PM_BFEXT(PLLMUL, ctrl) && !PM_BFEXT(PLLDIV, ctrl)) { + pr_debug("clk %s: failed to enable, rate not set\n", + clk->name); + return; + } + + ctrl |= PM_BIT(PLLEN); + pm_writel(PLL1, ctrl); + + /* Wait for PLL lock. */ + for (timeout = 10000; timeout; timeout--) { + status = pm_readl(ISR); + if (status & PM_BIT(LOCK1)) + break; + udelay(10); + } + + if (!(status & PM_BIT(LOCK1))) + printk(KERN_ERR "clk %s: timeout waiting for lock\n", + clk->name); + } else { + ctrl &= ~PM_BIT(PLLEN); + pm_writel(PLL1, ctrl); + } +} + +static unsigned long pll1_get_rate(struct clk *clk) +{ + u32 control; + + control = pm_readl(PLL1); + + return pll_get_rate(clk, control); +} + +static long pll1_set_rate(struct clk *clk, unsigned long rate, int apply) +{ + u32 ctrl = 0; + unsigned long actual_rate; + + actual_rate = pll_set_rate(clk, rate, &ctrl); + + if (apply) { + if (actual_rate != rate) + return -EINVAL; + if (clk->users > 0) + return -EBUSY; + pr_debug(KERN_INFO "clk %s: new rate %lu (actual rate %lu)\n", + clk->name, rate, actual_rate); + pm_writel(PLL1, ctrl); + } + + return actual_rate; +} + +static int pll1_set_parent(struct clk *clk, struct clk *parent) +{ + u32 ctrl; + + if (clk->users > 0) + return -EBUSY; + + ctrl = pm_readl(PLL1); + WARN_ON(ctrl & PM_BIT(PLLEN)); + + if (parent == &osc0) + ctrl &= ~PM_BIT(PLLOSC); + else if (parent == &osc1) + ctrl |= PM_BIT(PLLOSC); + else + return -EINVAL; + + pm_writel(PLL1, ctrl); + clk->parent = parent; + + return 0; +} + +/* + * The AT32AP7000 has five primary clock sources: One 32kHz + * oscillator, two crystal oscillators and two PLLs. + */ +static struct clk osc32k = { + .name = "osc32k", + .get_rate = osc_get_rate, + .users = 1, + .index = 0, +}; +static struct clk osc0 = { + .name = "osc0", + .get_rate = osc_get_rate, + .users = 1, + .index = 1, +}; +static struct clk osc1 = { + .name = "osc1", + .get_rate = osc_get_rate, + .index = 2, +}; +static struct clk pll0 = { + .name = "pll0", + .get_rate = pll0_get_rate, + .parent = &osc0, +}; +static struct clk pll1 = { + .name = "pll1", + .mode = pll1_mode, + .get_rate = pll1_get_rate, + .set_rate = pll1_set_rate, + .set_parent = pll1_set_parent, + .parent = &osc0, +}; + +/* + * The main clock can be either osc0 or pll0. The boot loader may + * have chosen one for us, so we don't really know which one until we + * have a look at the SM. + */ +static struct clk *main_clock; + +/* + * Synchronous clocks are generated from the main clock. The clocks + * must satisfy the constraint + * fCPU >= fHSB >= fPB + * i.e. each clock must not be faster than its parent. + */ +static unsigned long bus_clk_get_rate(struct clk *clk, unsigned int shift) +{ + return main_clock->get_rate(main_clock) >> shift; +}; + +static void cpu_clk_mode(struct clk *clk, int enabled) +{ + unsigned long flags; + u32 mask; + + spin_lock_irqsave(&pm_lock, flags); + mask = pm_readl(CPU_MASK); + if (enabled) + mask |= 1 << clk->index; + else + mask &= ~(1 << clk->index); + pm_writel(CPU_MASK, mask); + spin_unlock_irqrestore(&pm_lock, flags); +} + +static unsigned long cpu_clk_get_rate(struct clk *clk) +{ + unsigned long cksel, shift = 0; + + cksel = pm_readl(CKSEL); + if (cksel & PM_BIT(CPUDIV)) + shift = PM_BFEXT(CPUSEL, cksel) + 1; + + return bus_clk_get_rate(clk, shift); +} + +static long cpu_clk_set_rate(struct clk *clk, unsigned long rate, int apply) +{ + u32 control; + unsigned long parent_rate, child_div, actual_rate, div; + + parent_rate = clk->parent->get_rate(clk->parent); + control = pm_readl(CKSEL); + + if (control & PM_BIT(HSBDIV)) + child_div = 1 << (PM_BFEXT(HSBSEL, control) + 1); + else + child_div = 1; + + if (rate > 3 * (parent_rate / 4) || child_div == 1) { + actual_rate = parent_rate; + control &= ~PM_BIT(CPUDIV); + } else { + unsigned int cpusel; + div = (parent_rate + rate / 2) / rate; + if (div > child_div) + div = child_div; + cpusel = (div > 1) ? (fls(div) - 2) : 0; + control = PM_BIT(CPUDIV) | PM_BFINS(CPUSEL, cpusel, control); + actual_rate = parent_rate / (1 << (cpusel + 1)); + } + + pr_debug("clk %s: new rate %lu (actual rate %lu)\n", + clk->name, rate, actual_rate); + + if (apply) + pm_writel(CKSEL, control); + + return actual_rate; +} + +static void hsb_clk_mode(struct clk *clk, int enabled) +{ + unsigned long flags; + u32 mask; + + spin_lock_irqsave(&pm_lock, flags); + mask = pm_readl(HSB_MASK); + if (enabled) + mask |= 1 << clk->index; + else + mask &= ~(1 << clk->index); + pm_writel(HSB_MASK, mask); + spin_unlock_irqrestore(&pm_lock, flags); +} + +static unsigned long hsb_clk_get_rate(struct clk *clk) +{ + unsigned long cksel, shift = 0; + + cksel = pm_readl(CKSEL); + if (cksel & PM_BIT(HSBDIV)) + shift = PM_BFEXT(HSBSEL, cksel) + 1; + + return bus_clk_get_rate(clk, shift); +} + +void pba_clk_mode(struct clk *clk, int enabled) +{ + unsigned long flags; + u32 mask; + + spin_lock_irqsave(&pm_lock, flags); + mask = pm_readl(PBA_MASK); + if (enabled) + mask |= 1 << clk->index; + else + mask &= ~(1 << clk->index); + pm_writel(PBA_MASK, mask); + spin_unlock_irqrestore(&pm_lock, flags); +} + +unsigned long pba_clk_get_rate(struct clk *clk) +{ + unsigned long cksel, shift = 0; + + cksel = pm_readl(CKSEL); + if (cksel & PM_BIT(PBADIV)) + shift = PM_BFEXT(PBASEL, cksel) + 1; + + return bus_clk_get_rate(clk, shift); +} + +static void pbb_clk_mode(struct clk *clk, int enabled) +{ + unsigned long flags; + u32 mask; + + spin_lock_irqsave(&pm_lock, flags); + mask = pm_readl(PBB_MASK); + if (enabled) + mask |= 1 << clk->index; + else + mask &= ~(1 << clk->index); + pm_writel(PBB_MASK, mask); + spin_unlock_irqrestore(&pm_lock, flags); +} + +static unsigned long pbb_clk_get_rate(struct clk *clk) +{ + unsigned long cksel, shift = 0; + + cksel = pm_readl(CKSEL); + if (cksel & PM_BIT(PBBDIV)) + shift = PM_BFEXT(PBBSEL, cksel) + 1; + + return bus_clk_get_rate(clk, shift); +} + +static struct clk cpu_clk = { + .name = "cpu", + .get_rate = cpu_clk_get_rate, + .set_rate = cpu_clk_set_rate, + .users = 1, +}; +static struct clk hsb_clk = { + .name = "hsb", + .parent = &cpu_clk, + .get_rate = hsb_clk_get_rate, +}; +static struct clk pba_clk = { + .name = "pba", + .parent = &hsb_clk, + .mode = hsb_clk_mode, + .get_rate = pba_clk_get_rate, + .index = 1, +}; +static struct clk pbb_clk = { + .name = "pbb", + .parent = &hsb_clk, + .mode = hsb_clk_mode, + .get_rate = pbb_clk_get_rate, + .users = 1, + .index = 2, +}; + +/* -------------------------------------------------------------------- + * Generic Clock operations + * -------------------------------------------------------------------- */ + +static void genclk_mode(struct clk *clk, int enabled) +{ + u32 control; + + control = pm_readl(GCCTRL(clk->index)); + if (enabled) + control |= PM_BIT(CEN); + else + control &= ~PM_BIT(CEN); + pm_writel(GCCTRL(clk->index), control); +} + +static unsigned long genclk_get_rate(struct clk *clk) +{ + u32 control; + unsigned long div = 1; + + control = pm_readl(GCCTRL(clk->index)); + if (control & PM_BIT(DIVEN)) + div = 2 * (PM_BFEXT(DIV, control) + 1); + + return clk->parent->get_rate(clk->parent) / div; +} + +static long genclk_set_rate(struct clk *clk, unsigned long rate, int apply) +{ + u32 control; + unsigned long parent_rate, actual_rate, div; + + parent_rate = clk->parent->get_rate(clk->parent); + control = pm_readl(GCCTRL(clk->index)); + + if (rate > 3 * parent_rate / 4) { + actual_rate = parent_rate; + control &= ~PM_BIT(DIVEN); + } else { + div = (parent_rate + rate) / (2 * rate) - 1; + control = PM_BFINS(DIV, div, control) | PM_BIT(DIVEN); + actual_rate = parent_rate / (2 * (div + 1)); + } + + dev_dbg(clk->dev, "clk %s: new rate %lu (actual rate %lu)\n", + clk->name, rate, actual_rate); + + if (apply) + pm_writel(GCCTRL(clk->index), control); + + return actual_rate; +} + +int genclk_set_parent(struct clk *clk, struct clk *parent) +{ + u32 control; + + dev_dbg(clk->dev, "clk %s: new parent %s (was %s)\n", + clk->name, parent->name, clk->parent->name); + + control = pm_readl(GCCTRL(clk->index)); + + if (parent == &osc1 || parent == &pll1) + control |= PM_BIT(OSCSEL); + else if (parent == &osc0 || parent == &pll0) + control &= ~PM_BIT(OSCSEL); + else + return -EINVAL; + + if (parent == &pll0 || parent == &pll1) + control |= PM_BIT(PLLSEL); + else + control &= ~PM_BIT(PLLSEL); + + pm_writel(GCCTRL(clk->index), control); + clk->parent = parent; + + return 0; +} + +static void __init genclk_init_parent(struct clk *clk) +{ + u32 control; + struct clk *parent; + + BUG_ON(clk->index > 7); + + control = pm_readl(GCCTRL(clk->index)); + if (control & PM_BIT(OSCSEL)) + parent = (control & PM_BIT(PLLSEL)) ? &pll1 : &osc1; + else + parent = (control & PM_BIT(PLLSEL)) ? &pll0 : &osc0; + + clk->parent = parent; +} + +static struct dw_dma_platform_data dw_dmac0_data = { + .nr_channels = 3, + .block_size = 4095U, + .nr_masters = 2, + .data_width = { 2, 2 }, +}; + +static struct resource dw_dmac0_resource[] = { + PBMEM(0xff200000), + IRQ(2), +}; +DEFINE_DEV_DATA(dw_dmac, 0); +DEV_CLK(hclk, dw_dmac0, hsb, 10); + +/* -------------------------------------------------------------------- + * System peripherals + * -------------------------------------------------------------------- */ +static struct resource at32_pm0_resource[] = { + { + .start = 0xfff00000, + .end = 0xfff0007f, + .flags = IORESOURCE_MEM, + }, + IRQ(20), +}; + +static struct resource at32ap700x_rtc0_resource[] = { + { + .start = 0xfff00080, + .end = 0xfff000af, + .flags = IORESOURCE_MEM, + }, + IRQ(21), +}; + +static struct resource at32_wdt0_resource[] = { + { + .start = 0xfff000b0, + .end = 0xfff000cf, + .flags = IORESOURCE_MEM, + }, +}; + +static struct resource at32_eic0_resource[] = { + { + .start = 0xfff00100, + .end = 0xfff0013f, + .flags = IORESOURCE_MEM, + }, + IRQ(19), +}; + +DEFINE_DEV(at32_pm, 0); +DEFINE_DEV(at32ap700x_rtc, 0); +DEFINE_DEV(at32_wdt, 0); +DEFINE_DEV(at32_eic, 0); + +/* + * Peripheral clock for PM, RTC, WDT and EIC. PM will ensure that this + * is always running. + */ +static struct clk at32_pm_pclk = { + .name = "pclk", + .dev = &at32_pm0_device.dev, + .parent = &pbb_clk, + .mode = pbb_clk_mode, + .get_rate = pbb_clk_get_rate, + .users = 1, + .index = 0, +}; + +static struct resource intc0_resource[] = { + PBMEM(0xfff00400), +}; +struct platform_device at32_intc0_device = { + .name = "intc", + .id = 0, + .resource = intc0_resource, + .num_resources = ARRAY_SIZE(intc0_resource), +}; +DEV_CLK(pclk, at32_intc0, pbb, 1); + +static struct clk ebi_clk = { + .name = "ebi", + .parent = &hsb_clk, + .mode = hsb_clk_mode, + .get_rate = hsb_clk_get_rate, + .users = 1, +}; +static struct clk hramc_clk = { + .name = "hramc", + .parent = &hsb_clk, + .mode = hsb_clk_mode, + .get_rate = hsb_clk_get_rate, + .users = 1, + .index = 3, +}; +static struct clk sdramc_clk = { + .name = "sdramc_clk", + .parent = &pbb_clk, + .mode = pbb_clk_mode, + .get_rate = pbb_clk_get_rate, + .users = 1, + .index = 14, +}; + +static struct resource smc0_resource[] = { + PBMEM(0xfff03400), +}; +DEFINE_DEV(smc, 0); +DEV_CLK(pclk, smc0, pbb, 13); +DEV_CLK(mck, smc0, hsb, 0); + +static struct platform_device pdc_device = { + .name = "pdc", + .id = 0, +}; +DEV_CLK(hclk, pdc, hsb, 4); +DEV_CLK(pclk, pdc, pba, 16); + +static struct clk pico_clk = { + .name = "pico", + .parent = &cpu_clk, + .mode = cpu_clk_mode, + .get_rate = cpu_clk_get_rate, + .users = 1, +}; + +/* -------------------------------------------------------------------- + * HMATRIX + * -------------------------------------------------------------------- */ + +struct clk at32_hmatrix_clk = { + .name = "hmatrix_clk", + .parent = &pbb_clk, + .mode = pbb_clk_mode, + .get_rate = pbb_clk_get_rate, + .index = 2, + .users = 1, +}; + +/* + * Set bits in the HMATRIX Special Function Register (SFR) used by the + * External Bus Interface (EBI). This can be used to enable special + * features like CompactFlash support, NAND Flash support, etc. on + * certain chipselects. + */ +static inline void set_ebi_sfr_bits(u32 mask) +{ + hmatrix_sfr_set_bits(HMATRIX_SLAVE_EBI, mask); +} + +/* -------------------------------------------------------------------- + * Timer/Counter (TC) + * -------------------------------------------------------------------- */ + +static struct resource at32_tcb0_resource[] = { + PBMEM(0xfff00c00), + IRQ(22), +}; +static struct platform_device at32_tcb0_device = { + .name = "atmel_tcb", + .id = 0, + .resource = at32_tcb0_resource, + .num_resources = ARRAY_SIZE(at32_tcb0_resource), +}; +DEV_CLK(t0_clk, at32_tcb0, pbb, 3); + +static struct resource at32_tcb1_resource[] = { + PBMEM(0xfff01000), + IRQ(23), +}; +static struct platform_device at32_tcb1_device = { + .name = "atmel_tcb", + .id = 1, + .resource = at32_tcb1_resource, + .num_resources = ARRAY_SIZE(at32_tcb1_resource), +}; +DEV_CLK(t0_clk, at32_tcb1, pbb, 4); + +/* -------------------------------------------------------------------- + * PIO + * -------------------------------------------------------------------- */ + +static struct resource pio0_resource[] = { + PBMEM(0xffe02800), + IRQ(13), +}; +DEFINE_DEV(pio, 0); +DEV_CLK(mck, pio0, pba, 10); + +static struct resource pio1_resource[] = { + PBMEM(0xffe02c00), + IRQ(14), +}; +DEFINE_DEV(pio, 1); +DEV_CLK(mck, pio1, pba, 11); + +static struct resource pio2_resource[] = { + PBMEM(0xffe03000), + IRQ(15), +}; +DEFINE_DEV(pio, 2); +DEV_CLK(mck, pio2, pba, 12); + +static struct resource pio3_resource[] = { + PBMEM(0xffe03400), + IRQ(16), +}; +DEFINE_DEV(pio, 3); +DEV_CLK(mck, pio3, pba, 13); + +static struct resource pio4_resource[] = { + PBMEM(0xffe03800), + IRQ(17), +}; +DEFINE_DEV(pio, 4); +DEV_CLK(mck, pio4, pba, 14); + +static int __init system_device_init(void) +{ + platform_device_register(&at32_pm0_device); + platform_device_register(&at32_intc0_device); + platform_device_register(&at32ap700x_rtc0_device); + platform_device_register(&at32_wdt0_device); + platform_device_register(&at32_eic0_device); + platform_device_register(&smc0_device); + platform_device_register(&pdc_device); + platform_device_register(&dw_dmac0_device); + + platform_device_register(&at32_tcb0_device); + platform_device_register(&at32_tcb1_device); + + platform_device_register(&pio0_device); + platform_device_register(&pio1_device); + platform_device_register(&pio2_device); + platform_device_register(&pio3_device); + platform_device_register(&pio4_device); + + return 0; +} +core_initcall(system_device_init); + +/* -------------------------------------------------------------------- + * PSIF + * -------------------------------------------------------------------- */ +static struct resource atmel_psif0_resource[] __initdata = { + { + .start = 0xffe03c00, + .end = 0xffe03cff, + .flags = IORESOURCE_MEM, + }, + IRQ(18), +}; +static struct clk atmel_psif0_pclk = { + .name = "pclk", + .parent = &pba_clk, + .mode = pba_clk_mode, + .get_rate = pba_clk_get_rate, + .index = 15, +}; + +static struct resource atmel_psif1_resource[] __initdata = { + { + .start = 0xffe03d00, + .end = 0xffe03dff, + .flags = IORESOURCE_MEM, + }, + IRQ(18), +}; +static struct clk atmel_psif1_pclk = { + .name = "pclk", + .parent = &pba_clk, + .mode = pba_clk_mode, + .get_rate = pba_clk_get_rate, + .index = 15, +}; + +struct platform_device *__init at32_add_device_psif(unsigned int id) +{ + struct platform_device *pdev; + u32 pin_mask; + + if (!(id == 0 || id == 1)) + return NULL; + + pdev = platform_device_alloc("atmel_psif", id); + if (!pdev) + return NULL; + + switch (id) { + case 0: + pin_mask = (1 << 8) | (1 << 9); /* CLOCK & DATA */ + + if (platform_device_add_resources(pdev, atmel_psif0_resource, + ARRAY_SIZE(atmel_psif0_resource))) + goto err_add_resources; + atmel_psif0_pclk.dev = &pdev->dev; + select_peripheral(PIOA, pin_mask, PERIPH_A, 0); + break; + case 1: + pin_mask = (1 << 11) | (1 << 12); /* CLOCK & DATA */ + + if (platform_device_add_resources(pdev, atmel_psif1_resource, + ARRAY_SIZE(atmel_psif1_resource))) + goto err_add_resources; + atmel_psif1_pclk.dev = &pdev->dev; + select_peripheral(PIOB, pin_mask, PERIPH_A, 0); + break; + default: + return NULL; + } + + platform_device_add(pdev); + return pdev; + +err_add_resources: + platform_device_put(pdev); + return NULL; +} + +/* -------------------------------------------------------------------- + * USART + * -------------------------------------------------------------------- */ + +static struct atmel_uart_data atmel_usart0_data = { + .use_dma_tx = 1, + .use_dma_rx = 1, +}; +static struct resource atmel_usart0_resource[] = { + PBMEM(0xffe00c00), + IRQ(6), +}; +DEFINE_DEV_DATA(atmel_usart, 0); +DEV_CLK(usart, atmel_usart0, pba, 3); + +static struct atmel_uart_data atmel_usart1_data = { + .use_dma_tx = 1, + .use_dma_rx = 1, +}; +static struct resource atmel_usart1_resource[] = { + PBMEM(0xffe01000), + IRQ(7), +}; +DEFINE_DEV_DATA(atmel_usart, 1); +DEV_CLK(usart, atmel_usart1, pba, 4); + +static struct atmel_uart_data atmel_usart2_data = { + .use_dma_tx = 1, + .use_dma_rx = 1, +}; +static struct resource atmel_usart2_resource[] = { + PBMEM(0xffe01400), + IRQ(8), +}; +DEFINE_DEV_DATA(atmel_usart, 2); +DEV_CLK(usart, atmel_usart2, pba, 5); + +static struct atmel_uart_data atmel_usart3_data = { + .use_dma_tx = 1, + .use_dma_rx = 1, +}; +static struct resource atmel_usart3_resource[] = { + PBMEM(0xffe01800), + IRQ(9), +}; +DEFINE_DEV_DATA(atmel_usart, 3); +DEV_CLK(usart, atmel_usart3, pba, 6); + +static inline void configure_usart0_pins(int flags) +{ + u32 pin_mask = (1 << 8) | (1 << 9); /* RXD & TXD */ + if (flags & ATMEL_USART_RTS) pin_mask |= (1 << 6); + if (flags & ATMEL_USART_CTS) pin_mask |= (1 << 7); + if (flags & ATMEL_USART_CLK) pin_mask |= (1 << 10); + + select_peripheral(PIOA, pin_mask, PERIPH_B, AT32_GPIOF_PULLUP); +} + +static inline void configure_usart1_pins(int flags) +{ + u32 pin_mask = (1 << 17) | (1 << 18); /* RXD & TXD */ + if (flags & ATMEL_USART_RTS) pin_mask |= (1 << 19); + if (flags & ATMEL_USART_CTS) pin_mask |= (1 << 20); + if (flags & ATMEL_USART_CLK) pin_mask |= (1 << 16); + + select_peripheral(PIOA, pin_mask, PERIPH_A, AT32_GPIOF_PULLUP); +} + +static inline void configure_usart2_pins(int flags) +{ + u32 pin_mask = (1 << 26) | (1 << 27); /* RXD & TXD */ + if (flags & ATMEL_USART_RTS) pin_mask |= (1 << 30); + if (flags & ATMEL_USART_CTS) pin_mask |= (1 << 29); + if (flags & ATMEL_USART_CLK) pin_mask |= (1 << 28); + + select_peripheral(PIOB, pin_mask, PERIPH_B, AT32_GPIOF_PULLUP); +} + +static inline void configure_usart3_pins(int flags) +{ + u32 pin_mask = (1 << 18) | (1 << 17); /* RXD & TXD */ + if (flags & ATMEL_USART_RTS) pin_mask |= (1 << 16); + if (flags & ATMEL_USART_CTS) pin_mask |= (1 << 15); + if (flags & ATMEL_USART_CLK) pin_mask |= (1 << 19); + + select_peripheral(PIOB, pin_mask, PERIPH_B, AT32_GPIOF_PULLUP); +} + +static struct platform_device *__initdata at32_usarts[4]; + +void __init at32_map_usart(unsigned int hw_id, unsigned int line, int flags) +{ + struct platform_device *pdev; + struct atmel_uart_data *pdata; + + switch (hw_id) { + case 0: + pdev = &atmel_usart0_device; + configure_usart0_pins(flags); + break; + case 1: + pdev = &atmel_usart1_device; + configure_usart1_pins(flags); + break; + case 2: + pdev = &atmel_usart2_device; + configure_usart2_pins(flags); + break; + case 3: + pdev = &atmel_usart3_device; + configure_usart3_pins(flags); + break; + default: + return; + } + + if (PXSEG(pdev->resource[0].start) == P4SEG) { + /* Addresses in the P4 segment are permanently mapped 1:1 */ + struct atmel_uart_data *data = pdev->dev.platform_data; + data->regs = (void __iomem *)pdev->resource[0].start; + } + + pdev->id = line; + pdata = pdev->dev.platform_data; + pdata->num = line; + at32_usarts[line] = pdev; +} + +struct platform_device *__init at32_add_device_usart(unsigned int id) +{ + platform_device_register(at32_usarts[id]); + return at32_usarts[id]; +} + +void __init at32_setup_serial_console(unsigned int usart_id) +{ +#ifdef CONFIG_SERIAL_ATMEL + atmel_default_console_device = at32_usarts[usart_id]; +#endif +} + +/* -------------------------------------------------------------------- + * Ethernet + * -------------------------------------------------------------------- */ + +#ifdef CONFIG_CPU_AT32AP7000 +static struct macb_platform_data macb0_data; +static struct resource macb0_resource[] = { + PBMEM(0xfff01800), + IRQ(25), +}; +DEFINE_DEV_DATA(macb, 0); +DEV_CLK(hclk, macb0, hsb, 8); +DEV_CLK(pclk, macb0, pbb, 6); + +static struct macb_platform_data macb1_data; +static struct resource macb1_resource[] = { + PBMEM(0xfff01c00), + IRQ(26), +}; +DEFINE_DEV_DATA(macb, 1); +DEV_CLK(hclk, macb1, hsb, 9); +DEV_CLK(pclk, macb1, pbb, 7); + +struct platform_device *__init +at32_add_device_eth(unsigned int id, struct macb_platform_data *data) +{ + struct platform_device *pdev; + u32 pin_mask; + + switch (id) { + case 0: + pdev = &macb0_device; + + pin_mask = (1 << 3); /* TXD0 */ + pin_mask |= (1 << 4); /* TXD1 */ + pin_mask |= (1 << 7); /* TXEN */ + pin_mask |= (1 << 8); /* TXCK */ + pin_mask |= (1 << 9); /* RXD0 */ + pin_mask |= (1 << 10); /* RXD1 */ + pin_mask |= (1 << 13); /* RXER */ + pin_mask |= (1 << 15); /* RXDV */ + pin_mask |= (1 << 16); /* MDC */ + pin_mask |= (1 << 17); /* MDIO */ + + if (!data->is_rmii) { + pin_mask |= (1 << 0); /* COL */ + pin_mask |= (1 << 1); /* CRS */ + pin_mask |= (1 << 2); /* TXER */ + pin_mask |= (1 << 5); /* TXD2 */ + pin_mask |= (1 << 6); /* TXD3 */ + pin_mask |= (1 << 11); /* RXD2 */ + pin_mask |= (1 << 12); /* RXD3 */ + pin_mask |= (1 << 14); /* RXCK */ +#ifndef CONFIG_BOARD_MIMC200 + pin_mask |= (1 << 18); /* SPD */ +#endif + } + + select_peripheral(PIOC, pin_mask, PERIPH_A, 0); + + break; + + case 1: + pdev = &macb1_device; + + pin_mask = (1 << 13); /* TXD0 */ + pin_mask |= (1 << 14); /* TXD1 */ + pin_mask |= (1 << 11); /* TXEN */ + pin_mask |= (1 << 12); /* TXCK */ + pin_mask |= (1 << 10); /* RXD0 */ + pin_mask |= (1 << 6); /* RXD1 */ + pin_mask |= (1 << 5); /* RXER */ + pin_mask |= (1 << 4); /* RXDV */ + pin_mask |= (1 << 3); /* MDC */ + pin_mask |= (1 << 2); /* MDIO */ + +#ifndef CONFIG_BOARD_MIMC200 + if (!data->is_rmii) + pin_mask |= (1 << 15); /* SPD */ +#endif + + select_peripheral(PIOD, pin_mask, PERIPH_B, 0); + + if (!data->is_rmii) { + pin_mask = (1 << 19); /* COL */ + pin_mask |= (1 << 23); /* CRS */ + pin_mask |= (1 << 26); /* TXER */ + pin_mask |= (1 << 27); /* TXD2 */ + pin_mask |= (1 << 28); /* TXD3 */ + pin_mask |= (1 << 29); /* RXD2 */ + pin_mask |= (1 << 30); /* RXD3 */ + pin_mask |= (1 << 24); /* RXCK */ + + select_peripheral(PIOC, pin_mask, PERIPH_B, 0); + } + break; + + default: + return NULL; + } + + memcpy(pdev->dev.platform_data, data, sizeof(struct macb_platform_data)); + platform_device_register(pdev); + + return pdev; +} +#endif + +/* -------------------------------------------------------------------- + * SPI + * -------------------------------------------------------------------- */ +static struct resource atmel_spi0_resource[] = { + PBMEM(0xffe00000), + IRQ(3), +}; +DEFINE_DEV(atmel_spi, 0); +DEV_CLK(spi_clk, atmel_spi0, pba, 0); + +static struct resource atmel_spi1_resource[] = { + PBMEM(0xffe00400), + IRQ(4), +}; +DEFINE_DEV(atmel_spi, 1); +DEV_CLK(spi_clk, atmel_spi1, pba, 1); + +void __init +at32_spi_setup_slaves(unsigned int bus_num, struct spi_board_info *b, unsigned int n) +{ + /* + * Manage the chipselects as GPIOs, normally using the same pins + * the SPI controller expects; but boards can use other pins. + */ + static u8 __initdata spi_pins[][4] = { + { GPIO_PIN_PA(3), GPIO_PIN_PA(4), + GPIO_PIN_PA(5), GPIO_PIN_PA(20) }, + { GPIO_PIN_PB(2), GPIO_PIN_PB(3), + GPIO_PIN_PB(4), GPIO_PIN_PA(27) }, + }; + unsigned int pin, mode; + + /* There are only 2 SPI controllers */ + if (bus_num > 1) + return; + + for (; n; n--, b++) { + b->bus_num = bus_num; + if (b->chip_select >= 4) + continue; + pin = (unsigned)b->controller_data; + if (!pin) { + pin = spi_pins[bus_num][b->chip_select]; + b->controller_data = (void *)pin; + } + mode = AT32_GPIOF_OUTPUT; + if (!(b->mode & SPI_CS_HIGH)) + mode |= AT32_GPIOF_HIGH; + at32_select_gpio(pin, mode); + } +} + +struct platform_device *__init +at32_add_device_spi(unsigned int id, struct spi_board_info *b, unsigned int n) +{ + struct platform_device *pdev; + u32 pin_mask; + + switch (id) { + case 0: + pdev = &atmel_spi0_device; + pin_mask = (1 << 1) | (1 << 2); /* MOSI & SCK */ + + /* pullup MISO so a level is always defined */ + select_peripheral(PIOA, (1 << 0), PERIPH_A, AT32_GPIOF_PULLUP); + select_peripheral(PIOA, pin_mask, PERIPH_A, 0); + + at32_spi_setup_slaves(0, b, n); + break; + + case 1: + pdev = &atmel_spi1_device; + pin_mask = (1 << 1) | (1 << 5); /* MOSI */ + + /* pullup MISO so a level is always defined */ + select_peripheral(PIOB, (1 << 0), PERIPH_B, AT32_GPIOF_PULLUP); + select_peripheral(PIOB, pin_mask, PERIPH_B, 0); + + at32_spi_setup_slaves(1, b, n); + break; + + default: + return NULL; + } + + spi_register_board_info(b, n); + platform_device_register(pdev); + return pdev; +} + +/* -------------------------------------------------------------------- + * TWI + * -------------------------------------------------------------------- */ +static struct resource atmel_twi0_resource[] __initdata = { + PBMEM(0xffe00800), + IRQ(5), +}; +static struct clk atmel_twi0_pclk = { + .name = "twi_pclk", + .parent = &pba_clk, + .mode = pba_clk_mode, + .get_rate = pba_clk_get_rate, + .index = 2, +}; + +struct platform_device *__init at32_add_device_twi(unsigned int id, + struct i2c_board_info *b, + unsigned int n) +{ + struct platform_device *pdev; + u32 pin_mask; + + if (id != 0) + return NULL; + + pdev = platform_device_alloc("atmel_twi", id); + if (!pdev) + return NULL; + + if (platform_device_add_resources(pdev, atmel_twi0_resource, + ARRAY_SIZE(atmel_twi0_resource))) + goto err_add_resources; + + pin_mask = (1 << 6) | (1 << 7); /* SDA & SDL */ + + select_peripheral(PIOA, pin_mask, PERIPH_A, 0); + + atmel_twi0_pclk.dev = &pdev->dev; + + if (b) + i2c_register_board_info(id, b, n); + + platform_device_add(pdev); + return pdev; + +err_add_resources: + platform_device_put(pdev); + return NULL; +} + +/* -------------------------------------------------------------------- + * MMC + * -------------------------------------------------------------------- */ +static struct resource atmel_mci0_resource[] __initdata = { + PBMEM(0xfff02400), + IRQ(28), +}; +static struct clk atmel_mci0_pclk = { + .name = "mci_clk", + .parent = &pbb_clk, + .mode = pbb_clk_mode, + .get_rate = pbb_clk_get_rate, + .index = 9, +}; + +struct platform_device *__init +at32_add_device_mci(unsigned int id, struct mci_platform_data *data) +{ + struct platform_device *pdev; + struct mci_dma_data *slave; + u32 pioa_mask; + u32 piob_mask; + + if (id != 0 || !data) + return NULL; + + /* Must have at least one usable slot */ + if (!data->slot[0].bus_width && !data->slot[1].bus_width) + return NULL; + + pdev = platform_device_alloc("atmel_mci", id); + if (!pdev) + goto fail; + + if (platform_device_add_resources(pdev, atmel_mci0_resource, + ARRAY_SIZE(atmel_mci0_resource))) + goto fail; + + slave = kzalloc(sizeof(struct mci_dma_data), GFP_KERNEL); + if (!slave) + goto fail; + + slave->sdata.dma_dev = &dw_dmac0_device.dev; + slave->sdata.src_id = 0; + slave->sdata.dst_id = 1; + slave->sdata.src_master = 1; + slave->sdata.dst_master = 0; + + data->dma_slave = slave; + + if (platform_device_add_data(pdev, data, + sizeof(struct mci_platform_data))) + goto fail_free; + + /* CLK line is common to both slots */ + pioa_mask = 1 << 10; + + switch (data->slot[0].bus_width) { + case 4: + pioa_mask |= 1 << 13; /* DATA1 */ + pioa_mask |= 1 << 14; /* DATA2 */ + pioa_mask |= 1 << 15; /* DATA3 */ + /* fall through */ + case 1: + pioa_mask |= 1 << 11; /* CMD */ + pioa_mask |= 1 << 12; /* DATA0 */ + + if (gpio_is_valid(data->slot[0].detect_pin)) + at32_select_gpio(data->slot[0].detect_pin, 0); + if (gpio_is_valid(data->slot[0].wp_pin)) + at32_select_gpio(data->slot[0].wp_pin, 0); + break; + case 0: + /* Slot is unused */ + break; + default: + goto fail_free; + } + + select_peripheral(PIOA, pioa_mask, PERIPH_A, 0); + piob_mask = 0; + + switch (data->slot[1].bus_width) { + case 4: + piob_mask |= 1 << 8; /* DATA1 */ + piob_mask |= 1 << 9; /* DATA2 */ + piob_mask |= 1 << 10; /* DATA3 */ + /* fall through */ + case 1: + piob_mask |= 1 << 6; /* CMD */ + piob_mask |= 1 << 7; /* DATA0 */ + select_peripheral(PIOB, piob_mask, PERIPH_B, 0); + + if (gpio_is_valid(data->slot[1].detect_pin)) + at32_select_gpio(data->slot[1].detect_pin, 0); + if (gpio_is_valid(data->slot[1].wp_pin)) + at32_select_gpio(data->slot[1].wp_pin, 0); + break; + case 0: + /* Slot is unused */ + break; + default: + if (!data->slot[0].bus_width) + goto fail_free; + + data->slot[1].bus_width = 0; + break; + } + + atmel_mci0_pclk.dev = &pdev->dev; + + platform_device_add(pdev); + return pdev; + +fail_free: + kfree(slave); +fail: + data->dma_slave = NULL; + platform_device_put(pdev); + return NULL; +} + +/* -------------------------------------------------------------------- + * LCDC + * -------------------------------------------------------------------- */ +#if defined(CONFIG_CPU_AT32AP7000) || defined(CONFIG_CPU_AT32AP7002) +static struct atmel_lcdfb_pdata atmel_lcdfb0_data; +static struct resource atmel_lcdfb0_resource[] = { + { + .start = 0xff000000, + .end = 0xff000fff, + .flags = IORESOURCE_MEM, + }, + IRQ(1), + { + /* Placeholder for pre-allocated fb memory */ + .start = 0x00000000, + .end = 0x00000000, + .flags = 0, + }, +}; +DEFINE_DEV_DATA(atmel_lcdfb, 0); +DEV_CLK(hclk, atmel_lcdfb0, hsb, 7); +static struct clk atmel_lcdfb0_pixclk = { + .name = "lcdc_clk", + .dev = &atmel_lcdfb0_device.dev, + .mode = genclk_mode, + .get_rate = genclk_get_rate, + .set_rate = genclk_set_rate, + .set_parent = genclk_set_parent, + .index = 7, +}; + +struct platform_device *__init +at32_add_device_lcdc(unsigned int id, struct atmel_lcdfb_pdata *data, + unsigned long fbmem_start, unsigned long fbmem_len, + u64 pin_mask) +{ + struct platform_device *pdev; + struct atmel_lcdfb_pdata *info; + struct fb_monspecs *monspecs; + struct fb_videomode *modedb; + unsigned int modedb_size; + u32 portc_mask, portd_mask, porte_mask; + + /* + * Do a deep copy of the fb data, monspecs and modedb. Make + * sure all allocations are done before setting up the + * portmux. + */ + monspecs = kmemdup(data->default_monspecs, + sizeof(struct fb_monspecs), GFP_KERNEL); + if (!monspecs) + return NULL; + + modedb_size = sizeof(struct fb_videomode) * monspecs->modedb_len; + modedb = kmemdup(monspecs->modedb, modedb_size, GFP_KERNEL); + if (!modedb) + goto err_dup_modedb; + monspecs->modedb = modedb; + + switch (id) { + case 0: + pdev = &atmel_lcdfb0_device; + + if (pin_mask == 0ULL) + /* Default to "full" lcdc control signals and 24bit */ + pin_mask = ATMEL_LCDC_PRI_24BIT | ATMEL_LCDC_PRI_CONTROL; + + /* LCDC on port C */ + portc_mask = pin_mask & 0xfff80000; + select_peripheral(PIOC, portc_mask, PERIPH_A, 0); + + /* LCDC on port D */ + portd_mask = pin_mask & 0x0003ffff; + select_peripheral(PIOD, portd_mask, PERIPH_A, 0); + + /* LCDC on port E */ + porte_mask = (pin_mask >> 32) & 0x0007ffff; + select_peripheral(PIOE, porte_mask, PERIPH_B, 0); + + clk_set_parent(&atmel_lcdfb0_pixclk, &pll0); + clk_set_rate(&atmel_lcdfb0_pixclk, clk_get_rate(&pll0)); + break; + + default: + goto err_invalid_id; + } + + if (fbmem_len) { + pdev->resource[2].start = fbmem_start; + pdev->resource[2].end = fbmem_start + fbmem_len - 1; + pdev->resource[2].flags = IORESOURCE_MEM; + } + + info = pdev->dev.platform_data; + memcpy(info, data, sizeof(struct atmel_lcdfb_pdata)); + info->default_monspecs = monspecs; + + pdev->name = "at32ap-lcdfb"; + + platform_device_register(pdev); + return pdev; + +err_invalid_id: + kfree(modedb); +err_dup_modedb: + kfree(monspecs); + return NULL; +} +#endif + +/* -------------------------------------------------------------------- + * PWM + * -------------------------------------------------------------------- */ +static struct resource atmel_pwm0_resource[] __initdata = { + PBMEM(0xfff01400), + IRQ(24), +}; +static struct clk atmel_pwm0_mck = { + .name = "at91sam9rl-pwm", + .parent = &pbb_clk, + .mode = pbb_clk_mode, + .get_rate = pbb_clk_get_rate, + .index = 5, +}; + +struct platform_device *__init at32_add_device_pwm(u32 mask) +{ + struct platform_device *pdev; + u32 pin_mask; + + if (!mask) + return NULL; + + pdev = platform_device_alloc("at91sam9rl-pwm", 0); + if (!pdev) + return NULL; + + if (platform_device_add_resources(pdev, atmel_pwm0_resource, + ARRAY_SIZE(atmel_pwm0_resource))) + goto out_free_pdev; + + pin_mask = 0; + if (mask & (1 << 0)) + pin_mask |= (1 << 28); + if (mask & (1 << 1)) + pin_mask |= (1 << 29); + if (pin_mask > 0) + select_peripheral(PIOA, pin_mask, PERIPH_A, 0); + + pin_mask = 0; + if (mask & (1 << 2)) + pin_mask |= (1 << 21); + if (mask & (1 << 3)) + pin_mask |= (1 << 22); + if (pin_mask > 0) + select_peripheral(PIOA, pin_mask, PERIPH_B, 0); + + atmel_pwm0_mck.dev = &pdev->dev; + + platform_device_add(pdev); + + return pdev; + +out_free_pdev: + platform_device_put(pdev); + return NULL; +} + +/* -------------------------------------------------------------------- + * SSC + * -------------------------------------------------------------------- */ +static struct resource ssc0_resource[] = { + PBMEM(0xffe01c00), + IRQ(10), +}; +DEFINE_DEV(ssc, 0); +DEV_CLK(pclk, ssc0, pba, 7); + +static struct resource ssc1_resource[] = { + PBMEM(0xffe02000), + IRQ(11), +}; +DEFINE_DEV(ssc, 1); +DEV_CLK(pclk, ssc1, pba, 8); + +static struct resource ssc2_resource[] = { + PBMEM(0xffe02400), + IRQ(12), +}; +DEFINE_DEV(ssc, 2); +DEV_CLK(pclk, ssc2, pba, 9); + +struct platform_device *__init +at32_add_device_ssc(unsigned int id, unsigned int flags) +{ + struct platform_device *pdev; + u32 pin_mask = 0; + + switch (id) { + case 0: + pdev = &ssc0_device; + if (flags & ATMEL_SSC_RF) + pin_mask |= (1 << 21); /* RF */ + if (flags & ATMEL_SSC_RK) + pin_mask |= (1 << 22); /* RK */ + if (flags & ATMEL_SSC_TK) + pin_mask |= (1 << 23); /* TK */ + if (flags & ATMEL_SSC_TF) + pin_mask |= (1 << 24); /* TF */ + if (flags & ATMEL_SSC_TD) + pin_mask |= (1 << 25); /* TD */ + if (flags & ATMEL_SSC_RD) + pin_mask |= (1 << 26); /* RD */ + + if (pin_mask > 0) + select_peripheral(PIOA, pin_mask, PERIPH_A, 0); + + break; + case 1: + pdev = &ssc1_device; + if (flags & ATMEL_SSC_RF) + pin_mask |= (1 << 0); /* RF */ + if (flags & ATMEL_SSC_RK) + pin_mask |= (1 << 1); /* RK */ + if (flags & ATMEL_SSC_TK) + pin_mask |= (1 << 2); /* TK */ + if (flags & ATMEL_SSC_TF) + pin_mask |= (1 << 3); /* TF */ + if (flags & ATMEL_SSC_TD) + pin_mask |= (1 << 4); /* TD */ + if (flags & ATMEL_SSC_RD) + pin_mask |= (1 << 5); /* RD */ + + if (pin_mask > 0) + select_peripheral(PIOA, pin_mask, PERIPH_B, 0); + + break; + case 2: + pdev = &ssc2_device; + if (flags & ATMEL_SSC_TD) + pin_mask |= (1 << 13); /* TD */ + if (flags & ATMEL_SSC_RD) + pin_mask |= (1 << 14); /* RD */ + if (flags & ATMEL_SSC_TK) + pin_mask |= (1 << 15); /* TK */ + if (flags & ATMEL_SSC_TF) + pin_mask |= (1 << 16); /* TF */ + if (flags & ATMEL_SSC_RF) + pin_mask |= (1 << 17); /* RF */ + if (flags & ATMEL_SSC_RK) + pin_mask |= (1 << 18); /* RK */ + + if (pin_mask > 0) + select_peripheral(PIOB, pin_mask, PERIPH_A, 0); + + break; + default: + return NULL; + } + + platform_device_register(pdev); + return pdev; +} + +/* -------------------------------------------------------------------- + * USB Device Controller + * -------------------------------------------------------------------- */ +static struct resource usba0_resource[] __initdata = { + { + .start = 0xff300000, + .end = 0xff3fffff, + .flags = IORESOURCE_MEM, + }, { + .start = 0xfff03000, + .end = 0xfff033ff, + .flags = IORESOURCE_MEM, + }, + IRQ(31), +}; +static struct clk usba0_pclk = { + .name = "pclk", + .parent = &pbb_clk, + .mode = pbb_clk_mode, + .get_rate = pbb_clk_get_rate, + .index = 12, +}; +static struct clk usba0_hclk = { + .name = "hclk", + .parent = &hsb_clk, + .mode = hsb_clk_mode, + .get_rate = hsb_clk_get_rate, + .index = 6, +}; + +#define EP(nam, idx, maxpkt, maxbk, dma, isoc) \ + [idx] = { \ + .name = nam, \ + .index = idx, \ + .fifo_size = maxpkt, \ + .nr_banks = maxbk, \ + .can_dma = dma, \ + .can_isoc = isoc, \ + } + +static struct usba_ep_data at32_usba_ep[] __initdata = { + EP("ep0", 0, 64, 1, 0, 0), + EP("ep1", 1, 512, 2, 1, 1), + EP("ep2", 2, 512, 2, 1, 1), + EP("ep3-int", 3, 64, 3, 1, 0), + EP("ep4-int", 4, 64, 3, 1, 0), + EP("ep5", 5, 1024, 3, 1, 1), + EP("ep6", 6, 1024, 3, 1, 1), +}; + +#undef EP + +struct platform_device *__init +at32_add_device_usba(unsigned int id, struct usba_platform_data *data) +{ + /* + * pdata doesn't have room for any endpoints, so we need to + * append room for the ones we need right after it. + */ + struct { + struct usba_platform_data pdata; + struct usba_ep_data ep[7]; + } usba_data; + struct platform_device *pdev; + + if (id != 0) + return NULL; + + pdev = platform_device_alloc("atmel_usba_udc", 0); + if (!pdev) + return NULL; + + if (platform_device_add_resources(pdev, usba0_resource, + ARRAY_SIZE(usba0_resource))) + goto out_free_pdev; + + if (data) { + usba_data.pdata.vbus_pin = data->vbus_pin; + usba_data.pdata.vbus_pin_inverted = data->vbus_pin_inverted; + } else { + usba_data.pdata.vbus_pin = -EINVAL; + usba_data.pdata.vbus_pin_inverted = -EINVAL; + } + + data = &usba_data.pdata; + data->num_ep = ARRAY_SIZE(at32_usba_ep); + memcpy(data->ep, at32_usba_ep, sizeof(at32_usba_ep)); + + if (platform_device_add_data(pdev, data, sizeof(usba_data))) + goto out_free_pdev; + + if (gpio_is_valid(data->vbus_pin)) + at32_select_gpio(data->vbus_pin, 0); + + usba0_pclk.dev = &pdev->dev; + usba0_hclk.dev = &pdev->dev; + + platform_device_add(pdev); + + return pdev; + +out_free_pdev: + platform_device_put(pdev); + return NULL; +} + +/* -------------------------------------------------------------------- + * IDE / CompactFlash + * -------------------------------------------------------------------- */ +#if defined(CONFIG_CPU_AT32AP7000) || defined(CONFIG_CPU_AT32AP7001) +static struct resource at32_smc_cs4_resource[] __initdata = { + { + .start = 0x04000000, + .end = 0x07ffffff, + .flags = IORESOURCE_MEM, + }, + IRQ(~0UL), /* Magic IRQ will be overridden */ +}; +static struct resource at32_smc_cs5_resource[] __initdata = { + { + .start = 0x20000000, + .end = 0x23ffffff, + .flags = IORESOURCE_MEM, + }, + IRQ(~0UL), /* Magic IRQ will be overridden */ +}; + +static int __init at32_init_ide_or_cf(struct platform_device *pdev, + unsigned int cs, unsigned int extint) +{ + static unsigned int extint_pin_map[4] __initdata = { + (1 << 25), + (1 << 26), + (1 << 27), + (1 << 28), + }; + static bool common_pins_initialized __initdata = false; + unsigned int extint_pin; + int ret; + u32 pin_mask; + + if (extint >= ARRAY_SIZE(extint_pin_map)) + return -EINVAL; + extint_pin = extint_pin_map[extint]; + + switch (cs) { + case 4: + ret = platform_device_add_resources(pdev, + at32_smc_cs4_resource, + ARRAY_SIZE(at32_smc_cs4_resource)); + if (ret) + return ret; + + /* NCS4 -> OE_N */ + select_peripheral(PIOE, (1 << 21), PERIPH_A, 0); + hmatrix_sfr_set_bits(HMATRIX_SLAVE_EBI, HMATRIX_EBI_CF0_ENABLE); + break; + case 5: + ret = platform_device_add_resources(pdev, + at32_smc_cs5_resource, + ARRAY_SIZE(at32_smc_cs5_resource)); + if (ret) + return ret; + + /* NCS5 -> OE_N */ + select_peripheral(PIOE, (1 << 22), PERIPH_A, 0); + hmatrix_sfr_set_bits(HMATRIX_SLAVE_EBI, HMATRIX_EBI_CF1_ENABLE); + break; + default: + return -EINVAL; + } + + if (!common_pins_initialized) { + pin_mask = (1 << 19); /* CFCE1 -> CS0_N */ + pin_mask |= (1 << 20); /* CFCE2 -> CS1_N */ + pin_mask |= (1 << 23); /* CFRNW -> DIR */ + pin_mask |= (1 << 24); /* NWAIT <- IORDY */ + + select_peripheral(PIOE, pin_mask, PERIPH_A, 0); + + common_pins_initialized = true; + } + + select_peripheral(PIOB, extint_pin, PERIPH_A, AT32_GPIOF_DEGLITCH); + + pdev->resource[1].start = EIM_IRQ_BASE + extint; + pdev->resource[1].end = pdev->resource[1].start; + + return 0; +} + +struct platform_device *__init +at32_add_device_ide(unsigned int id, unsigned int extint, + struct ide_platform_data *data) +{ + struct platform_device *pdev; + + pdev = platform_device_alloc("at32_ide", id); + if (!pdev) + goto fail; + + if (platform_device_add_data(pdev, data, + sizeof(struct ide_platform_data))) + goto fail; + + if (at32_init_ide_or_cf(pdev, data->cs, extint)) + goto fail; + + platform_device_add(pdev); + return pdev; + +fail: + platform_device_put(pdev); + return NULL; +} + +struct platform_device *__init +at32_add_device_cf(unsigned int id, unsigned int extint, + struct cf_platform_data *data) +{ + struct platform_device *pdev; + + pdev = platform_device_alloc("at32_cf", id); + if (!pdev) + goto fail; + + if (platform_device_add_data(pdev, data, + sizeof(struct cf_platform_data))) + goto fail; + + if (at32_init_ide_or_cf(pdev, data->cs, extint)) + goto fail; + + if (gpio_is_valid(data->detect_pin)) + at32_select_gpio(data->detect_pin, AT32_GPIOF_DEGLITCH); + if (gpio_is_valid(data->reset_pin)) + at32_select_gpio(data->reset_pin, 0); + if (gpio_is_valid(data->vcc_pin)) + at32_select_gpio(data->vcc_pin, 0); + /* READY is used as extint, so we can't select it as gpio */ + + platform_device_add(pdev); + return pdev; + +fail: + platform_device_put(pdev); + return NULL; +} +#endif + +/* -------------------------------------------------------------------- + * NAND Flash / SmartMedia + * -------------------------------------------------------------------- */ +static struct resource smc_cs3_resource[] __initdata = { + { + .start = 0x0c000000, + .end = 0x0fffffff, + .flags = IORESOURCE_MEM, + }, { + .start = 0xfff03c00, + .end = 0xfff03fff, + .flags = IORESOURCE_MEM, + }, +}; + +struct platform_device *__init +at32_add_device_nand(unsigned int id, struct atmel_nand_data *data) +{ + struct platform_device *pdev; + + if (id != 0 || !data) + return NULL; + + pdev = platform_device_alloc("atmel_nand", id); + if (!pdev) + goto fail; + + if (platform_device_add_resources(pdev, smc_cs3_resource, + ARRAY_SIZE(smc_cs3_resource))) + goto fail; + + /* For at32ap7000, we use the reset workaround for nand driver */ + data->need_reset_workaround = true; + + if (platform_device_add_data(pdev, data, + sizeof(struct atmel_nand_data))) + goto fail; + + hmatrix_sfr_set_bits(HMATRIX_SLAVE_EBI, HMATRIX_EBI_NAND_ENABLE); + if (data->enable_pin) + at32_select_gpio(data->enable_pin, + AT32_GPIOF_OUTPUT | AT32_GPIOF_HIGH); + if (data->rdy_pin) + at32_select_gpio(data->rdy_pin, 0); + if (data->det_pin) + at32_select_gpio(data->det_pin, 0); + + platform_device_add(pdev); + return pdev; + +fail: + platform_device_put(pdev); + return NULL; +} + +/* -------------------------------------------------------------------- + * AC97C + * -------------------------------------------------------------------- */ +static struct resource atmel_ac97c0_resource[] __initdata = { + PBMEM(0xfff02800), + IRQ(29), +}; +static struct clk atmel_ac97c0_pclk = { + .name = "pclk", + .parent = &pbb_clk, + .mode = pbb_clk_mode, + .get_rate = pbb_clk_get_rate, + .index = 10, +}; + +struct platform_device *__init +at32_add_device_ac97c(unsigned int id, struct ac97c_platform_data *data, + unsigned int flags) +{ + struct platform_device *pdev; + struct dw_dma_slave *rx_dws; + struct dw_dma_slave *tx_dws; + struct ac97c_platform_data _data; + u32 pin_mask; + + if (id != 0) + return NULL; + + pdev = platform_device_alloc("atmel_ac97c", id); + if (!pdev) + return NULL; + + if (platform_device_add_resources(pdev, atmel_ac97c0_resource, + ARRAY_SIZE(atmel_ac97c0_resource))) + goto out_free_resources; + + if (!data) { + data = &_data; + memset(data, 0, sizeof(struct ac97c_platform_data)); + data->reset_pin = -ENODEV; + } + + rx_dws = &data->rx_dws; + tx_dws = &data->tx_dws; + + /* Check if DMA slave interface for capture should be configured. */ + if (flags & AC97C_CAPTURE) { + rx_dws->dma_dev = &dw_dmac0_device.dev; + rx_dws->src_id = 3; + rx_dws->src_master = 0; + rx_dws->dst_master = 1; + } + + /* Check if DMA slave interface for playback should be configured. */ + if (flags & AC97C_PLAYBACK) { + tx_dws->dma_dev = &dw_dmac0_device.dev; + tx_dws->dst_id = 4; + tx_dws->src_master = 0; + tx_dws->dst_master = 1; + } + + if (platform_device_add_data(pdev, data, + sizeof(struct ac97c_platform_data))) + goto out_free_resources; + + /* SDO | SYNC | SCLK | SDI */ + pin_mask = (1 << 20) | (1 << 21) | (1 << 22) | (1 << 23); + + select_peripheral(PIOB, pin_mask, PERIPH_B, 0); + + if (gpio_is_valid(data->reset_pin)) + at32_select_gpio(data->reset_pin, AT32_GPIOF_OUTPUT + | AT32_GPIOF_HIGH); + + atmel_ac97c0_pclk.dev = &pdev->dev; + + platform_device_add(pdev); + return pdev; + +out_free_resources: + platform_device_put(pdev); + return NULL; +} + +/* -------------------------------------------------------------------- + * ABDAC + * -------------------------------------------------------------------- */ +static struct resource abdac0_resource[] __initdata = { + PBMEM(0xfff02000), + IRQ(27), +}; +static struct clk abdac0_pclk = { + .name = "pclk", + .parent = &pbb_clk, + .mode = pbb_clk_mode, + .get_rate = pbb_clk_get_rate, + .index = 8, +}; +static struct clk abdac0_sample_clk = { + .name = "sample_clk", + .mode = genclk_mode, + .get_rate = genclk_get_rate, + .set_rate = genclk_set_rate, + .set_parent = genclk_set_parent, + .index = 6, +}; + +struct platform_device *__init +at32_add_device_abdac(unsigned int id, struct atmel_abdac_pdata *data) +{ + struct platform_device *pdev; + struct dw_dma_slave *dws; + u32 pin_mask; + + if (id != 0 || !data) + return NULL; + + pdev = platform_device_alloc("atmel_abdac", id); + if (!pdev) + return NULL; + + if (platform_device_add_resources(pdev, abdac0_resource, + ARRAY_SIZE(abdac0_resource))) + goto out_free_resources; + + dws = &data->dws; + + dws->dma_dev = &dw_dmac0_device.dev; + dws->dst_id = 2; + dws->src_master = 0; + dws->dst_master = 1; + + if (platform_device_add_data(pdev, data, + sizeof(struct atmel_abdac_pdata))) + goto out_free_resources; + + pin_mask = (1 << 20) | (1 << 22); /* DATA1 & DATAN1 */ + pin_mask |= (1 << 21) | (1 << 23); /* DATA0 & DATAN0 */ + + select_peripheral(PIOB, pin_mask, PERIPH_A, 0); + + abdac0_pclk.dev = &pdev->dev; + abdac0_sample_clk.dev = &pdev->dev; + + platform_device_add(pdev); + return pdev; + +out_free_resources: + platform_device_put(pdev); + return NULL; +} + +/* -------------------------------------------------------------------- + * GCLK + * -------------------------------------------------------------------- */ +static struct clk gclk0 = { + .name = "gclk0", + .mode = genclk_mode, + .get_rate = genclk_get_rate, + .set_rate = genclk_set_rate, + .set_parent = genclk_set_parent, + .index = 0, +}; +static struct clk gclk1 = { + .name = "gclk1", + .mode = genclk_mode, + .get_rate = genclk_get_rate, + .set_rate = genclk_set_rate, + .set_parent = genclk_set_parent, + .index = 1, +}; +static struct clk gclk2 = { + .name = "gclk2", + .mode = genclk_mode, + .get_rate = genclk_get_rate, + .set_rate = genclk_set_rate, + .set_parent = genclk_set_parent, + .index = 2, +}; +static struct clk gclk3 = { + .name = "gclk3", + .mode = genclk_mode, + .get_rate = genclk_get_rate, + .set_rate = genclk_set_rate, + .set_parent = genclk_set_parent, + .index = 3, +}; +static struct clk gclk4 = { + .name = "gclk4", + .mode = genclk_mode, + .get_rate = genclk_get_rate, + .set_rate = genclk_set_rate, + .set_parent = genclk_set_parent, + .index = 4, +}; + +static __initdata struct clk *init_clocks[] = { + &osc32k, + &osc0, + &osc1, + &pll0, + &pll1, + &cpu_clk, + &hsb_clk, + &pba_clk, + &pbb_clk, + &at32_pm_pclk, + &at32_intc0_pclk, + &at32_hmatrix_clk, + &ebi_clk, + &hramc_clk, + &sdramc_clk, + &smc0_pclk, + &smc0_mck, + &pdc_hclk, + &pdc_pclk, + &dw_dmac0_hclk, + &pico_clk, + &pio0_mck, + &pio1_mck, + &pio2_mck, + &pio3_mck, + &pio4_mck, + &at32_tcb0_t0_clk, + &at32_tcb1_t0_clk, + &atmel_psif0_pclk, + &atmel_psif1_pclk, + &atmel_usart0_usart, + &atmel_usart1_usart, + &atmel_usart2_usart, + &atmel_usart3_usart, + &atmel_pwm0_mck, +#if defined(CONFIG_CPU_AT32AP7000) + &macb0_hclk, + &macb0_pclk, + &macb1_hclk, + &macb1_pclk, +#endif + &atmel_spi0_spi_clk, + &atmel_spi1_spi_clk, + &atmel_twi0_pclk, + &atmel_mci0_pclk, +#if defined(CONFIG_CPU_AT32AP7000) || defined(CONFIG_CPU_AT32AP7002) + &atmel_lcdfb0_hclk, + &atmel_lcdfb0_pixclk, +#endif + &ssc0_pclk, + &ssc1_pclk, + &ssc2_pclk, + &usba0_hclk, + &usba0_pclk, + &atmel_ac97c0_pclk, + &abdac0_pclk, + &abdac0_sample_clk, + &gclk0, + &gclk1, + &gclk2, + &gclk3, + &gclk4, +}; + +void __init setup_platform(void) +{ + u32 cpu_mask = 0, hsb_mask = 0, pba_mask = 0, pbb_mask = 0; + int i; + + if (pm_readl(MCCTRL) & PM_BIT(PLLSEL)) { + main_clock = &pll0; + cpu_clk.parent = &pll0; + } else { + main_clock = &osc0; + cpu_clk.parent = &osc0; + } + + if (pm_readl(PLL0) & PM_BIT(PLLOSC)) + pll0.parent = &osc1; + if (pm_readl(PLL1) & PM_BIT(PLLOSC)) + pll1.parent = &osc1; + + genclk_init_parent(&gclk0); + genclk_init_parent(&gclk1); + genclk_init_parent(&gclk2); + genclk_init_parent(&gclk3); + genclk_init_parent(&gclk4); +#if defined(CONFIG_CPU_AT32AP7000) || defined(CONFIG_CPU_AT32AP7002) + genclk_init_parent(&atmel_lcdfb0_pixclk); +#endif + genclk_init_parent(&abdac0_sample_clk); + + /* + * Build initial dynamic clock list by registering all clocks + * from the array. + * At the same time, turn on all clocks that have at least one + * user already, and turn off everything else. We only do this + * for module clocks, and even though it isn't particularly + * pretty to check the address of the mode function, it should + * do the trick... + */ + for (i = 0; i < ARRAY_SIZE(init_clocks); i++) { + struct clk *clk = init_clocks[i]; + + /* first, register clock */ + at32_clk_register(clk); + + if (clk->users == 0) + continue; + + if (clk->mode == &cpu_clk_mode) + cpu_mask |= 1 << clk->index; + else if (clk->mode == &hsb_clk_mode) + hsb_mask |= 1 << clk->index; + else if (clk->mode == &pba_clk_mode) + pba_mask |= 1 << clk->index; + else if (clk->mode == &pbb_clk_mode) + pbb_mask |= 1 << clk->index; + } + + pm_writel(CPU_MASK, cpu_mask); + pm_writel(HSB_MASK, hsb_mask); + pm_writel(PBA_MASK, pba_mask); + pm_writel(PBB_MASK, pbb_mask); + + /* Initialize the port muxes */ + at32_init_pio(&pio0_device); + at32_init_pio(&pio1_device); + at32_init_pio(&pio2_device); + at32_init_pio(&pio3_device); + at32_init_pio(&pio4_device); +} + +struct gen_pool *sram_pool; + +static int __init sram_init(void) +{ + struct gen_pool *pool; + + /* 1KiB granularity */ + pool = gen_pool_create(10, -1); + if (!pool) + goto fail; + + if (gen_pool_add(pool, 0x24000000, 0x8000, -1)) + goto err_pool_add; + + sram_pool = pool; + return 0; + +err_pool_add: + gen_pool_destroy(pool); +fail: + pr_err("Failed to create SRAM pool\n"); + return -ENOMEM; +} +core_initcall(sram_init); diff --git a/arch/avr32/mach-at32ap/clock.c b/arch/avr32/mach-at32ap/clock.c new file mode 100644 index 000000000..23b1a97fa --- /dev/null +++ b/arch/avr32/mach-at32ap/clock.c @@ -0,0 +1,307 @@ +/* + * Clock management for AT32AP CPUs + * + * Copyright (C) 2006 Atmel Corporation + * + * Based on arch/arm/mach-at91/clock.c + * Copyright (C) 2005 David Brownell + * Copyright (C) 2005 Ivan Kokshaysky + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#include <linux/clk.h> +#include <linux/err.h> +#include <linux/export.h> +#include <linux/device.h> +#include <linux/string.h> +#include <linux/list.h> + +#include <mach/chip.h> + +#include "clock.h" + +/* at32 clock list */ +static LIST_HEAD(at32_clock_list); + +static DEFINE_SPINLOCK(clk_lock); +static DEFINE_SPINLOCK(clk_list_lock); + +void at32_clk_register(struct clk *clk) +{ + spin_lock(&clk_list_lock); + /* add the new item to the end of the list */ + list_add_tail(&clk->list, &at32_clock_list); + spin_unlock(&clk_list_lock); +} + +static struct clk *__clk_get(struct device *dev, const char *id) +{ + struct clk *clk; + + list_for_each_entry(clk, &at32_clock_list, list) { + if (clk->dev == dev && strcmp(id, clk->name) == 0) { + return clk; + } + } + + return ERR_PTR(-ENOENT); +} + +struct clk *clk_get(struct device *dev, const char *id) +{ + struct clk *clk; + + spin_lock(&clk_list_lock); + clk = __clk_get(dev, id); + spin_unlock(&clk_list_lock); + + return clk; +} + +EXPORT_SYMBOL(clk_get); + +void clk_put(struct clk *clk) +{ + /* clocks are static for now, we can't free them */ +} +EXPORT_SYMBOL(clk_put); + +static void __clk_enable(struct clk *clk) +{ + if (clk->parent) + __clk_enable(clk->parent); + if (clk->users++ == 0 && clk->mode) + clk->mode(clk, 1); +} + +int clk_enable(struct clk *clk) +{ + unsigned long flags; + + spin_lock_irqsave(&clk_lock, flags); + __clk_enable(clk); + spin_unlock_irqrestore(&clk_lock, flags); + + return 0; +} +EXPORT_SYMBOL(clk_enable); + +static void __clk_disable(struct clk *clk) +{ + if (clk->users == 0) { + printk(KERN_ERR "%s: mismatched disable\n", clk->name); + WARN_ON(1); + return; + } + + if (--clk->users == 0 && clk->mode) + clk->mode(clk, 0); + if (clk->parent) + __clk_disable(clk->parent); +} + +void clk_disable(struct clk *clk) +{ + unsigned long flags; + + spin_lock_irqsave(&clk_lock, flags); + __clk_disable(clk); + spin_unlock_irqrestore(&clk_lock, flags); +} +EXPORT_SYMBOL(clk_disable); + +unsigned long clk_get_rate(struct clk *clk) +{ + unsigned long flags; + unsigned long rate; + + spin_lock_irqsave(&clk_lock, flags); + rate = clk->get_rate(clk); + spin_unlock_irqrestore(&clk_lock, flags); + + return rate; +} +EXPORT_SYMBOL(clk_get_rate); + +long clk_round_rate(struct clk *clk, unsigned long rate) +{ + unsigned long flags, actual_rate; + + if (!clk->set_rate) + return -ENOSYS; + + spin_lock_irqsave(&clk_lock, flags); + actual_rate = clk->set_rate(clk, rate, 0); + spin_unlock_irqrestore(&clk_lock, flags); + + return actual_rate; +} +EXPORT_SYMBOL(clk_round_rate); + +int clk_set_rate(struct clk *clk, unsigned long rate) +{ + unsigned long flags; + long ret; + + if (!clk->set_rate) + return -ENOSYS; + + spin_lock_irqsave(&clk_lock, flags); + ret = clk->set_rate(clk, rate, 1); + spin_unlock_irqrestore(&clk_lock, flags); + + return (ret < 0) ? ret : 0; +} +EXPORT_SYMBOL(clk_set_rate); + +int clk_set_parent(struct clk *clk, struct clk *parent) +{ + unsigned long flags; + int ret; + + if (!clk->set_parent) + return -ENOSYS; + + spin_lock_irqsave(&clk_lock, flags); + ret = clk->set_parent(clk, parent); + spin_unlock_irqrestore(&clk_lock, flags); + + return ret; +} +EXPORT_SYMBOL(clk_set_parent); + +struct clk *clk_get_parent(struct clk *clk) +{ + return clk->parent; +} +EXPORT_SYMBOL(clk_get_parent); + + + +#ifdef CONFIG_DEBUG_FS + +/* /sys/kernel/debug/at32ap_clk */ + +#include <linux/io.h> +#include <linux/debugfs.h> +#include <linux/seq_file.h> +#include "pm.h" + + +#define NEST_DELTA 2 +#define NEST_MAX 6 + +struct clkinf { + struct seq_file *s; + unsigned nest; +}; + +static void +dump_clock(struct clk *parent, struct clkinf *r) +{ + unsigned nest = r->nest; + char buf[16 + NEST_MAX]; + struct clk *clk; + unsigned i; + + /* skip clocks coupled to devices that aren't registered */ + if (parent->dev && !dev_name(parent->dev) && !parent->users) + return; + + /* <nest spaces> name <pad to end> */ + memset(buf, ' ', sizeof(buf) - 1); + buf[sizeof(buf) - 1] = 0; + i = strlen(parent->name); + memcpy(buf + nest, parent->name, + min(i, (unsigned)(sizeof(buf) - 1 - nest))); + + seq_printf(r->s, "%s%c users=%2d %-3s %9ld Hz", + buf, parent->set_parent ? '*' : ' ', + parent->users, + parent->users ? "on" : "off", /* NOTE: not-paranoid!! */ + clk_get_rate(parent)); + if (parent->dev) + seq_printf(r->s, ", for %s", dev_name(parent->dev)); + seq_printf(r->s, "\n"); + + /* cost of this scan is small, but not linear... */ + r->nest = nest + NEST_DELTA; + + list_for_each_entry(clk, &at32_clock_list, list) { + if (clk->parent == parent) + dump_clock(clk, r); + } + r->nest = nest; +} + +static int clk_show(struct seq_file *s, void *unused) +{ + struct clkinf r; + int i; + struct clk *clk; + + /* show all the power manager registers */ + seq_printf(s, "MCCTRL = %8x\n", pm_readl(MCCTRL)); + seq_printf(s, "CKSEL = %8x\n", pm_readl(CKSEL)); + seq_printf(s, "CPUMASK = %8x\n", pm_readl(CPU_MASK)); + seq_printf(s, "HSBMASK = %8x\n", pm_readl(HSB_MASK)); + seq_printf(s, "PBAMASK = %8x\n", pm_readl(PBA_MASK)); + seq_printf(s, "PBBMASK = %8x\n", pm_readl(PBB_MASK)); + seq_printf(s, "PLL0 = %8x\n", pm_readl(PLL0)); + seq_printf(s, "PLL1 = %8x\n", pm_readl(PLL1)); + seq_printf(s, "IMR = %8x\n", pm_readl(IMR)); + for (i = 0; i < 8; i++) { + if (i == 5) + continue; + seq_printf(s, "GCCTRL%d = %8x\n", i, pm_readl(GCCTRL(i))); + } + + seq_printf(s, "\n"); + + r.s = s; + r.nest = 0; + /* protected from changes on the list while dumping */ + spin_lock(&clk_list_lock); + + /* show clock tree as derived from the three oscillators */ + clk = __clk_get(NULL, "osc32k"); + dump_clock(clk, &r); + clk_put(clk); + + clk = __clk_get(NULL, "osc0"); + dump_clock(clk, &r); + clk_put(clk); + + clk = __clk_get(NULL, "osc1"); + dump_clock(clk, &r); + clk_put(clk); + + spin_unlock(&clk_list_lock); + + return 0; +} + +static int clk_open(struct inode *inode, struct file *file) +{ + return single_open(file, clk_show, NULL); +} + +static const struct file_operations clk_operations = { + .open = clk_open, + .read = seq_read, + .llseek = seq_lseek, + .release = single_release, +}; + +static int __init clk_debugfs_init(void) +{ + (void) debugfs_create_file("at32ap_clk", S_IFREG | S_IRUGO, + NULL, NULL, &clk_operations); + + return 0; +} +postcore_initcall(clk_debugfs_init); + +#endif diff --git a/arch/avr32/mach-at32ap/clock.h b/arch/avr32/mach-at32ap/clock.h new file mode 100644 index 000000000..4c7ebbdc6 --- /dev/null +++ b/arch/avr32/mach-at32ap/clock.h @@ -0,0 +1,35 @@ +/* + * Clock management for AT32AP CPUs + * + * Copyright (C) 2006 Atmel Corporation + * + * Based on arch/arm/mach-at91/clock.c + * Copyright (C) 2005 David Brownell + * Copyright (C) 2005 Ivan Kokshaysky + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#include <linux/clk.h> +#include <linux/list.h> + + +void at32_clk_register(struct clk *clk); + +struct clk { + struct list_head list; /* linking element */ + const char *name; /* Clock name/function */ + struct device *dev; /* Device the clock is used by */ + struct clk *parent; /* Parent clock, if any */ + void (*mode)(struct clk *clk, int enabled); + unsigned long (*get_rate)(struct clk *clk); + long (*set_rate)(struct clk *clk, unsigned long rate, + int apply); + int (*set_parent)(struct clk *clk, struct clk *parent); + u16 users; /* Enabled if non-zero */ + u16 index; /* Sibling index */ +}; + +unsigned long pba_clk_get_rate(struct clk *clk); +void pba_clk_mode(struct clk *clk, int enabled); diff --git a/arch/avr32/mach-at32ap/extint.c b/arch/avr32/mach-at32ap/extint.c new file mode 100644 index 000000000..cfb298d66 --- /dev/null +++ b/arch/avr32/mach-at32ap/extint.c @@ -0,0 +1,272 @@ +/* + * External interrupt handling for AT32AP CPUs + * + * Copyright (C) 2006 Atmel Corporation + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/errno.h> +#include <linux/init.h> +#include <linux/interrupt.h> +#include <linux/irq.h> +#include <linux/platform_device.h> +#include <linux/random.h> +#include <linux/slab.h> + +#include <asm/io.h> + +/* EIC register offsets */ +#define EIC_IER 0x0000 +#define EIC_IDR 0x0004 +#define EIC_IMR 0x0008 +#define EIC_ISR 0x000c +#define EIC_ICR 0x0010 +#define EIC_MODE 0x0014 +#define EIC_EDGE 0x0018 +#define EIC_LEVEL 0x001c +#define EIC_NMIC 0x0024 + +/* Bitfields in NMIC */ +#define EIC_NMIC_ENABLE (1 << 0) + +/* Bit manipulation macros */ +#define EIC_BIT(name) \ + (1 << EIC_##name##_OFFSET) +#define EIC_BF(name,value) \ + (((value) & ((1 << EIC_##name##_SIZE) - 1)) \ + << EIC_##name##_OFFSET) +#define EIC_BFEXT(name,value) \ + (((value) >> EIC_##name##_OFFSET) \ + & ((1 << EIC_##name##_SIZE) - 1)) +#define EIC_BFINS(name,value,old) \ + (((old) & ~(((1 << EIC_##name##_SIZE) - 1) \ + << EIC_##name##_OFFSET)) \ + | EIC_BF(name,value)) + +/* Register access macros */ +#define eic_readl(port,reg) \ + __raw_readl((port)->regs + EIC_##reg) +#define eic_writel(port,reg,value) \ + __raw_writel((value), (port)->regs + EIC_##reg) + +struct eic { + void __iomem *regs; + struct irq_chip *chip; + unsigned int first_irq; +}; + +static struct eic *nmi_eic; +static bool nmi_enabled; + +static void eic_ack_irq(struct irq_data *d) +{ + struct eic *eic = irq_data_get_irq_chip_data(d); + eic_writel(eic, ICR, 1 << (d->irq - eic->first_irq)); +} + +static void eic_mask_irq(struct irq_data *d) +{ + struct eic *eic = irq_data_get_irq_chip_data(d); + eic_writel(eic, IDR, 1 << (d->irq - eic->first_irq)); +} + +static void eic_mask_ack_irq(struct irq_data *d) +{ + struct eic *eic = irq_data_get_irq_chip_data(d); + eic_writel(eic, ICR, 1 << (d->irq - eic->first_irq)); + eic_writel(eic, IDR, 1 << (d->irq - eic->first_irq)); +} + +static void eic_unmask_irq(struct irq_data *d) +{ + struct eic *eic = irq_data_get_irq_chip_data(d); + eic_writel(eic, IER, 1 << (d->irq - eic->first_irq)); +} + +static int eic_set_irq_type(struct irq_data *d, unsigned int flow_type) +{ + struct eic *eic = irq_data_get_irq_chip_data(d); + unsigned int irq = d->irq; + unsigned int i = irq - eic->first_irq; + u32 mode, edge, level; + + flow_type &= IRQ_TYPE_SENSE_MASK; + if (flow_type == IRQ_TYPE_NONE) + flow_type = IRQ_TYPE_LEVEL_LOW; + + mode = eic_readl(eic, MODE); + edge = eic_readl(eic, EDGE); + level = eic_readl(eic, LEVEL); + + switch (flow_type) { + case IRQ_TYPE_LEVEL_LOW: + mode |= 1 << i; + level &= ~(1 << i); + break; + case IRQ_TYPE_LEVEL_HIGH: + mode |= 1 << i; + level |= 1 << i; + break; + case IRQ_TYPE_EDGE_RISING: + mode &= ~(1 << i); + edge |= 1 << i; + break; + case IRQ_TYPE_EDGE_FALLING: + mode &= ~(1 << i); + edge &= ~(1 << i); + break; + default: + return -EINVAL; + } + + eic_writel(eic, MODE, mode); + eic_writel(eic, EDGE, edge); + eic_writel(eic, LEVEL, level); + + irqd_set_trigger_type(d, flow_type); + if (flow_type & (IRQ_TYPE_LEVEL_LOW | IRQ_TYPE_LEVEL_HIGH)) + __irq_set_handler_locked(irq, handle_level_irq); + else + __irq_set_handler_locked(irq, handle_edge_irq); + + return IRQ_SET_MASK_OK_NOCOPY; +} + +static struct irq_chip eic_chip = { + .name = "eic", + .irq_ack = eic_ack_irq, + .irq_mask = eic_mask_irq, + .irq_mask_ack = eic_mask_ack_irq, + .irq_unmask = eic_unmask_irq, + .irq_set_type = eic_set_irq_type, +}; + +static void demux_eic_irq(unsigned int irq, struct irq_desc *desc) +{ + struct eic *eic = irq_desc_get_handler_data(desc); + unsigned long status, pending; + unsigned int i; + + status = eic_readl(eic, ISR); + pending = status & eic_readl(eic, IMR); + + while (pending) { + i = fls(pending) - 1; + pending &= ~(1 << i); + + generic_handle_irq(i + eic->first_irq); + } +} + +int nmi_enable(void) +{ + nmi_enabled = true; + + if (nmi_eic) + eic_writel(nmi_eic, NMIC, EIC_NMIC_ENABLE); + + return 0; +} + +void nmi_disable(void) +{ + if (nmi_eic) + eic_writel(nmi_eic, NMIC, 0); + + nmi_enabled = false; +} + +static int __init eic_probe(struct platform_device *pdev) +{ + struct eic *eic; + struct resource *regs; + unsigned int i; + unsigned int nr_of_irqs; + unsigned int int_irq; + int ret; + u32 pattern; + + regs = platform_get_resource(pdev, IORESOURCE_MEM, 0); + int_irq = platform_get_irq(pdev, 0); + if (!regs || (int)int_irq <= 0) { + dev_dbg(&pdev->dev, "missing regs and/or irq resource\n"); + return -ENXIO; + } + + ret = -ENOMEM; + eic = kzalloc(sizeof(struct eic), GFP_KERNEL); + if (!eic) { + dev_dbg(&pdev->dev, "no memory for eic structure\n"); + goto err_kzalloc; + } + + eic->first_irq = EIM_IRQ_BASE + 32 * pdev->id; + eic->regs = ioremap(regs->start, resource_size(regs)); + if (!eic->regs) { + dev_dbg(&pdev->dev, "failed to map regs\n"); + goto err_ioremap; + } + + /* + * Find out how many interrupt lines that are actually + * implemented in hardware. + */ + eic_writel(eic, IDR, ~0UL); + eic_writel(eic, MODE, ~0UL); + pattern = eic_readl(eic, MODE); + nr_of_irqs = fls(pattern); + + /* Trigger on low level unless overridden by driver */ + eic_writel(eic, EDGE, 0UL); + eic_writel(eic, LEVEL, 0UL); + + eic->chip = &eic_chip; + + for (i = 0; i < nr_of_irqs; i++) { + irq_set_chip_and_handler(eic->first_irq + i, &eic_chip, + handle_level_irq); + irq_set_chip_data(eic->first_irq + i, eic); + } + + irq_set_chained_handler(int_irq, demux_eic_irq); + irq_set_handler_data(int_irq, eic); + + if (pdev->id == 0) { + nmi_eic = eic; + if (nmi_enabled) + /* + * Someone tried to enable NMI before we were + * ready. Do it now. + */ + nmi_enable(); + } + + dev_info(&pdev->dev, + "External Interrupt Controller at 0x%p, IRQ %u\n", + eic->regs, int_irq); + dev_info(&pdev->dev, + "Handling %u external IRQs, starting with IRQ %u\n", + nr_of_irqs, eic->first_irq); + + return 0; + +err_ioremap: + kfree(eic); +err_kzalloc: + return ret; +} + +static struct platform_driver eic_driver = { + .driver = { + .name = "at32_eic", + }, +}; + +static int __init eic_init(void) +{ + return platform_driver_probe(&eic_driver, eic_probe); +} +arch_initcall(eic_init); diff --git a/arch/avr32/mach-at32ap/hmatrix.c b/arch/avr32/mach-at32ap/hmatrix.c new file mode 100644 index 000000000..48f5ede77 --- /dev/null +++ b/arch/avr32/mach-at32ap/hmatrix.c @@ -0,0 +1,88 @@ +/* + * High-Speed Bus Matrix helper functions + * + * Copyright (C) 2008 Atmel Corporation + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#include <linux/clk.h> +#include <linux/io.h> + +#include <mach/chip.h> +#include <mach/hmatrix.h> + +static inline void __hmatrix_write_reg(unsigned long offset, u32 value) +{ + __raw_writel(value, (void __iomem __force *)(HMATRIX_BASE + offset)); +} + +static inline u32 __hmatrix_read_reg(unsigned long offset) +{ + return __raw_readl((void __iomem __force *)(HMATRIX_BASE + offset)); +} + +/** + * hmatrix_write_reg - write HMATRIX configuration register + * @offset: register offset + * @value: value to be written to the register at @offset + */ +void hmatrix_write_reg(unsigned long offset, u32 value) +{ + clk_enable(&at32_hmatrix_clk); + __hmatrix_write_reg(offset, value); + __hmatrix_read_reg(offset); + clk_disable(&at32_hmatrix_clk); +} + +/** + * hmatrix_read_reg - read HMATRIX configuration register + * @offset: register offset + * + * Returns the value of the register at @offset. + */ +u32 hmatrix_read_reg(unsigned long offset) +{ + u32 value; + + clk_enable(&at32_hmatrix_clk); + value = __hmatrix_read_reg(offset); + clk_disable(&at32_hmatrix_clk); + + return value; +} + +/** + * hmatrix_sfr_set_bits - set bits in a slave's Special Function Register + * @slave_id: operate on the SFR belonging to this slave + * @mask: mask of bits to be set in the SFR + */ +void hmatrix_sfr_set_bits(unsigned int slave_id, u32 mask) +{ + u32 value; + + clk_enable(&at32_hmatrix_clk); + value = __hmatrix_read_reg(HMATRIX_SFR(slave_id)); + value |= mask; + __hmatrix_write_reg(HMATRIX_SFR(slave_id), value); + __hmatrix_read_reg(HMATRIX_SFR(slave_id)); + clk_disable(&at32_hmatrix_clk); +} + +/** + * hmatrix_sfr_set_bits - clear bits in a slave's Special Function Register + * @slave_id: operate on the SFR belonging to this slave + * @mask: mask of bits to be cleared in the SFR + */ +void hmatrix_sfr_clear_bits(unsigned int slave_id, u32 mask) +{ + u32 value; + + clk_enable(&at32_hmatrix_clk); + value = __hmatrix_read_reg(HMATRIX_SFR(slave_id)); + value &= ~mask; + __hmatrix_write_reg(HMATRIX_SFR(slave_id), value); + __hmatrix_read_reg(HMATRIX_SFR(slave_id)); + clk_disable(&at32_hmatrix_clk); +} diff --git a/arch/avr32/mach-at32ap/hsmc.c b/arch/avr32/mach-at32ap/hsmc.c new file mode 100644 index 000000000..f66245e6e --- /dev/null +++ b/arch/avr32/mach-at32ap/hsmc.c @@ -0,0 +1,282 @@ +/* + * Static Memory Controller for AT32 chips + * + * Copyright (C) 2006 Atmel Corporation + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#include <linux/clk.h> +#include <linux/err.h> +#include <linux/init.h> +#include <linux/module.h> +#include <linux/platform_device.h> +#include <linux/slab.h> + +#include <asm/io.h> +#include <mach/smc.h> + +#include "hsmc.h" + +#define NR_CHIP_SELECTS 6 + +struct hsmc { + void __iomem *regs; + struct clk *pclk; + struct clk *mck; +}; + +static struct hsmc *hsmc; + +void smc_set_timing(struct smc_config *config, + const struct smc_timing *timing) +{ + int recover; + int cycle; + + unsigned long mul; + + /* Reset all SMC timings */ + config->ncs_read_setup = 0; + config->nrd_setup = 0; + config->ncs_write_setup = 0; + config->nwe_setup = 0; + config->ncs_read_pulse = 0; + config->nrd_pulse = 0; + config->ncs_write_pulse = 0; + config->nwe_pulse = 0; + config->read_cycle = 0; + config->write_cycle = 0; + + /* + * cycles = x / T = x * f + * = ((x * 1000000000) * ((f * 65536) / 1000000000)) / 65536 + * = ((x * 1000000000) * (((f / 10000) * 65536) / 100000)) / 65536 + */ + mul = (clk_get_rate(hsmc->mck) / 10000) << 16; + mul /= 100000; + +#define ns2cyc(x) ((((x) * mul) + 65535) >> 16) + + if (timing->ncs_read_setup > 0) + config->ncs_read_setup = ns2cyc(timing->ncs_read_setup); + + if (timing->nrd_setup > 0) + config->nrd_setup = ns2cyc(timing->nrd_setup); + + if (timing->ncs_write_setup > 0) + config->ncs_write_setup = ns2cyc(timing->ncs_write_setup); + + if (timing->nwe_setup > 0) + config->nwe_setup = ns2cyc(timing->nwe_setup); + + if (timing->ncs_read_pulse > 0) + config->ncs_read_pulse = ns2cyc(timing->ncs_read_pulse); + + if (timing->nrd_pulse > 0) + config->nrd_pulse = ns2cyc(timing->nrd_pulse); + + if (timing->ncs_write_pulse > 0) + config->ncs_write_pulse = ns2cyc(timing->ncs_write_pulse); + + if (timing->nwe_pulse > 0) + config->nwe_pulse = ns2cyc(timing->nwe_pulse); + + if (timing->read_cycle > 0) + config->read_cycle = ns2cyc(timing->read_cycle); + + if (timing->write_cycle > 0) + config->write_cycle = ns2cyc(timing->write_cycle); + + /* Extend read cycle in needed */ + if (timing->ncs_read_recover > 0) + recover = ns2cyc(timing->ncs_read_recover); + else + recover = 1; + + cycle = config->ncs_read_setup + config->ncs_read_pulse + recover; + + if (config->read_cycle < cycle) + config->read_cycle = cycle; + + /* Extend read cycle in needed */ + if (timing->nrd_recover > 0) + recover = ns2cyc(timing->nrd_recover); + else + recover = 1; + + cycle = config->nrd_setup + config->nrd_pulse + recover; + + if (config->read_cycle < cycle) + config->read_cycle = cycle; + + /* Extend write cycle in needed */ + if (timing->ncs_write_recover > 0) + recover = ns2cyc(timing->ncs_write_recover); + else + recover = 1; + + cycle = config->ncs_write_setup + config->ncs_write_pulse + recover; + + if (config->write_cycle < cycle) + config->write_cycle = cycle; + + /* Extend write cycle in needed */ + if (timing->nwe_recover > 0) + recover = ns2cyc(timing->nwe_recover); + else + recover = 1; + + cycle = config->nwe_setup + config->nwe_pulse + recover; + + if (config->write_cycle < cycle) + config->write_cycle = cycle; +} +EXPORT_SYMBOL(smc_set_timing); + +int smc_set_configuration(int cs, const struct smc_config *config) +{ + unsigned long offset; + u32 setup, pulse, cycle, mode; + + if (!hsmc) + return -ENODEV; + if (cs >= NR_CHIP_SELECTS) + return -EINVAL; + + setup = (HSMC_BF(NWE_SETUP, config->nwe_setup) + | HSMC_BF(NCS_WR_SETUP, config->ncs_write_setup) + | HSMC_BF(NRD_SETUP, config->nrd_setup) + | HSMC_BF(NCS_RD_SETUP, config->ncs_read_setup)); + pulse = (HSMC_BF(NWE_PULSE, config->nwe_pulse) + | HSMC_BF(NCS_WR_PULSE, config->ncs_write_pulse) + | HSMC_BF(NRD_PULSE, config->nrd_pulse) + | HSMC_BF(NCS_RD_PULSE, config->ncs_read_pulse)); + cycle = (HSMC_BF(NWE_CYCLE, config->write_cycle) + | HSMC_BF(NRD_CYCLE, config->read_cycle)); + + switch (config->bus_width) { + case 1: + mode = HSMC_BF(DBW, HSMC_DBW_8_BITS); + break; + case 2: + mode = HSMC_BF(DBW, HSMC_DBW_16_BITS); + break; + case 4: + mode = HSMC_BF(DBW, HSMC_DBW_32_BITS); + break; + default: + return -EINVAL; + } + + switch (config->nwait_mode) { + case 0: + mode |= HSMC_BF(EXNW_MODE, HSMC_EXNW_MODE_DISABLED); + break; + case 1: + mode |= HSMC_BF(EXNW_MODE, HSMC_EXNW_MODE_RESERVED); + break; + case 2: + mode |= HSMC_BF(EXNW_MODE, HSMC_EXNW_MODE_FROZEN); + break; + case 3: + mode |= HSMC_BF(EXNW_MODE, HSMC_EXNW_MODE_READY); + break; + default: + return -EINVAL; + } + + if (config->tdf_cycles) { + mode |= HSMC_BF(TDF_CYCLES, config->tdf_cycles); + } + + if (config->nrd_controlled) + mode |= HSMC_BIT(READ_MODE); + if (config->nwe_controlled) + mode |= HSMC_BIT(WRITE_MODE); + if (config->byte_write) + mode |= HSMC_BIT(BAT); + if (config->tdf_mode) + mode |= HSMC_BIT(TDF_MODE); + + pr_debug("smc cs%d: setup/%08x pulse/%08x cycle/%08x mode/%08x\n", + cs, setup, pulse, cycle, mode); + + offset = cs * 0x10; + hsmc_writel(hsmc, SETUP0 + offset, setup); + hsmc_writel(hsmc, PULSE0 + offset, pulse); + hsmc_writel(hsmc, CYCLE0 + offset, cycle); + hsmc_writel(hsmc, MODE0 + offset, mode); + hsmc_readl(hsmc, MODE0); /* I/O barrier */ + + return 0; +} +EXPORT_SYMBOL(smc_set_configuration); + +static int hsmc_probe(struct platform_device *pdev) +{ + struct resource *regs; + struct clk *pclk, *mck; + int ret; + + if (hsmc) + return -EBUSY; + + regs = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!regs) + return -ENXIO; + pclk = clk_get(&pdev->dev, "pclk"); + if (IS_ERR(pclk)) + return PTR_ERR(pclk); + mck = clk_get(&pdev->dev, "mck"); + if (IS_ERR(mck)) { + ret = PTR_ERR(mck); + goto out_put_pclk; + } + + ret = -ENOMEM; + hsmc = kzalloc(sizeof(struct hsmc), GFP_KERNEL); + if (!hsmc) + goto out_put_clocks; + + clk_enable(pclk); + clk_enable(mck); + + hsmc->pclk = pclk; + hsmc->mck = mck; + hsmc->regs = ioremap(regs->start, resource_size(regs)); + if (!hsmc->regs) + goto out_disable_clocks; + + dev_info(&pdev->dev, "Atmel Static Memory Controller at 0x%08lx\n", + (unsigned long)regs->start); + + platform_set_drvdata(pdev, hsmc); + + return 0; + +out_disable_clocks: + clk_disable(mck); + clk_disable(pclk); + kfree(hsmc); +out_put_clocks: + clk_put(mck); +out_put_pclk: + clk_put(pclk); + hsmc = NULL; + return ret; +} + +static struct platform_driver hsmc_driver = { + .probe = hsmc_probe, + .driver = { + .name = "smc", + }, +}; + +static int __init hsmc_init(void) +{ + return platform_driver_register(&hsmc_driver); +} +core_initcall(hsmc_init); diff --git a/arch/avr32/mach-at32ap/hsmc.h b/arch/avr32/mach-at32ap/hsmc.h new file mode 100644 index 000000000..d1d48e26e --- /dev/null +++ b/arch/avr32/mach-at32ap/hsmc.h @@ -0,0 +1,127 @@ +/* + * Register definitions for Atmel Static Memory Controller (SMC) + * + * Copyright (C) 2006 Atmel Corporation + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#ifndef __ASM_AVR32_HSMC_H__ +#define __ASM_AVR32_HSMC_H__ + +/* HSMC register offsets */ +#define HSMC_SETUP0 0x0000 +#define HSMC_PULSE0 0x0004 +#define HSMC_CYCLE0 0x0008 +#define HSMC_MODE0 0x000c +#define HSMC_SETUP1 0x0010 +#define HSMC_PULSE1 0x0014 +#define HSMC_CYCLE1 0x0018 +#define HSMC_MODE1 0x001c +#define HSMC_SETUP2 0x0020 +#define HSMC_PULSE2 0x0024 +#define HSMC_CYCLE2 0x0028 +#define HSMC_MODE2 0x002c +#define HSMC_SETUP3 0x0030 +#define HSMC_PULSE3 0x0034 +#define HSMC_CYCLE3 0x0038 +#define HSMC_MODE3 0x003c +#define HSMC_SETUP4 0x0040 +#define HSMC_PULSE4 0x0044 +#define HSMC_CYCLE4 0x0048 +#define HSMC_MODE4 0x004c +#define HSMC_SETUP5 0x0050 +#define HSMC_PULSE5 0x0054 +#define HSMC_CYCLE5 0x0058 +#define HSMC_MODE5 0x005c + +/* Bitfields in SETUP0 */ +#define HSMC_NWE_SETUP_OFFSET 0 +#define HSMC_NWE_SETUP_SIZE 6 +#define HSMC_NCS_WR_SETUP_OFFSET 8 +#define HSMC_NCS_WR_SETUP_SIZE 6 +#define HSMC_NRD_SETUP_OFFSET 16 +#define HSMC_NRD_SETUP_SIZE 6 +#define HSMC_NCS_RD_SETUP_OFFSET 24 +#define HSMC_NCS_RD_SETUP_SIZE 6 + +/* Bitfields in PULSE0 */ +#define HSMC_NWE_PULSE_OFFSET 0 +#define HSMC_NWE_PULSE_SIZE 7 +#define HSMC_NCS_WR_PULSE_OFFSET 8 +#define HSMC_NCS_WR_PULSE_SIZE 7 +#define HSMC_NRD_PULSE_OFFSET 16 +#define HSMC_NRD_PULSE_SIZE 7 +#define HSMC_NCS_RD_PULSE_OFFSET 24 +#define HSMC_NCS_RD_PULSE_SIZE 7 + +/* Bitfields in CYCLE0 */ +#define HSMC_NWE_CYCLE_OFFSET 0 +#define HSMC_NWE_CYCLE_SIZE 9 +#define HSMC_NRD_CYCLE_OFFSET 16 +#define HSMC_NRD_CYCLE_SIZE 9 + +/* Bitfields in MODE0 */ +#define HSMC_READ_MODE_OFFSET 0 +#define HSMC_READ_MODE_SIZE 1 +#define HSMC_WRITE_MODE_OFFSET 1 +#define HSMC_WRITE_MODE_SIZE 1 +#define HSMC_EXNW_MODE_OFFSET 4 +#define HSMC_EXNW_MODE_SIZE 2 +#define HSMC_BAT_OFFSET 8 +#define HSMC_BAT_SIZE 1 +#define HSMC_DBW_OFFSET 12 +#define HSMC_DBW_SIZE 2 +#define HSMC_TDF_CYCLES_OFFSET 16 +#define HSMC_TDF_CYCLES_SIZE 4 +#define HSMC_TDF_MODE_OFFSET 20 +#define HSMC_TDF_MODE_SIZE 1 +#define HSMC_PMEN_OFFSET 24 +#define HSMC_PMEN_SIZE 1 +#define HSMC_PS_OFFSET 28 +#define HSMC_PS_SIZE 2 + +/* Constants for READ_MODE */ +#define HSMC_READ_MODE_NCS_CONTROLLED 0 +#define HSMC_READ_MODE_NRD_CONTROLLED 1 + +/* Constants for WRITE_MODE */ +#define HSMC_WRITE_MODE_NCS_CONTROLLED 0 +#define HSMC_WRITE_MODE_NWE_CONTROLLED 1 + +/* Constants for EXNW_MODE */ +#define HSMC_EXNW_MODE_DISABLED 0 +#define HSMC_EXNW_MODE_RESERVED 1 +#define HSMC_EXNW_MODE_FROZEN 2 +#define HSMC_EXNW_MODE_READY 3 + +/* Constants for BAT */ +#define HSMC_BAT_BYTE_SELECT 0 +#define HSMC_BAT_BYTE_WRITE 1 + +/* Constants for DBW */ +#define HSMC_DBW_8_BITS 0 +#define HSMC_DBW_16_BITS 1 +#define HSMC_DBW_32_BITS 2 + +/* Bit manipulation macros */ +#define HSMC_BIT(name) \ + (1 << HSMC_##name##_OFFSET) +#define HSMC_BF(name,value) \ + (((value) & ((1 << HSMC_##name##_SIZE) - 1)) \ + << HSMC_##name##_OFFSET) +#define HSMC_BFEXT(name,value) \ + (((value) >> HSMC_##name##_OFFSET) \ + & ((1 << HSMC_##name##_SIZE) - 1)) +#define HSMC_BFINS(name,value,old) \ + (((old) & ~(((1 << HSMC_##name##_SIZE) - 1) \ + << HSMC_##name##_OFFSET)) | HSMC_BF(name,value)) + +/* Register access macros */ +#define hsmc_readl(port,reg) \ + __raw_readl((port)->regs + HSMC_##reg) +#define hsmc_writel(port,reg,value) \ + __raw_writel((value), (port)->regs + HSMC_##reg) + +#endif /* __ASM_AVR32_HSMC_H__ */ diff --git a/arch/avr32/mach-at32ap/include/mach/at32ap700x.h b/arch/avr32/mach-at32ap/include/mach/at32ap700x.h new file mode 100644 index 000000000..b9222bf89 --- /dev/null +++ b/arch/avr32/mach-at32ap/include/mach/at32ap700x.h @@ -0,0 +1,245 @@ +/* + * Pin definitions for AT32AP7000. + * + * Copyright (C) 2006 Atmel Corporation + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#ifndef __ASM_ARCH_AT32AP700X_H__ +#define __ASM_ARCH_AT32AP700X_H__ + +#define GPIO_PERIPH_A 0 +#define GPIO_PERIPH_B 1 + +/* + * Pin numbers identifying specific GPIO pins on the chip. They can + * also be converted to IRQ numbers by passing them through + * gpio_to_irq(). + */ +#define GPIO_PIOA_BASE (0) +#define GPIO_PIOB_BASE (GPIO_PIOA_BASE + 32) +#define GPIO_PIOC_BASE (GPIO_PIOB_BASE + 32) +#define GPIO_PIOD_BASE (GPIO_PIOC_BASE + 32) +#define GPIO_PIOE_BASE (GPIO_PIOD_BASE + 32) + +#define GPIO_PIN_PA(N) (GPIO_PIOA_BASE + (N)) +#define GPIO_PIN_PB(N) (GPIO_PIOB_BASE + (N)) +#define GPIO_PIN_PC(N) (GPIO_PIOC_BASE + (N)) +#define GPIO_PIN_PD(N) (GPIO_PIOD_BASE + (N)) +#define GPIO_PIN_PE(N) (GPIO_PIOE_BASE + (N)) + + +/* + * DMAC peripheral hardware handshaking interfaces, used with dw_dmac + */ +#define DMAC_MCI_RX 0 +#define DMAC_MCI_TX 1 +#define DMAC_DAC_TX 2 +#define DMAC_AC97_A_RX 3 +#define DMAC_AC97_A_TX 4 +#define DMAC_AC97_B_RX 5 +#define DMAC_AC97_B_TX 6 +#define DMAC_DMAREQ_0 7 +#define DMAC_DMAREQ_1 8 +#define DMAC_DMAREQ_2 9 +#define DMAC_DMAREQ_3 10 + +/* HSB master IDs */ +#define HMATRIX_MASTER_CPU_DCACHE 0 +#define HMATRIX_MASTER_CPU_ICACHE 1 +#define HMATRIX_MASTER_PDC 2 +#define HMATRIX_MASTER_ISI 3 +#define HMATRIX_MASTER_USBA 4 +#define HMATRIX_MASTER_LCDC 5 +#define HMATRIX_MASTER_MACB0 6 +#define HMATRIX_MASTER_MACB1 7 +#define HMATRIX_MASTER_DMACA_M0 8 +#define HMATRIX_MASTER_DMACA_M1 9 + +/* HSB slave IDs */ +#define HMATRIX_SLAVE_SRAM0 0 +#define HMATRIX_SLAVE_SRAM1 1 +#define HMATRIX_SLAVE_PBA 2 +#define HMATRIX_SLAVE_PBB 3 +#define HMATRIX_SLAVE_EBI 4 +#define HMATRIX_SLAVE_USBA 5 +#define HMATRIX_SLAVE_LCDC 6 +#define HMATRIX_SLAVE_DMACA 7 + +/* Bits in HMATRIX SFR4 (EBI) */ +#define HMATRIX_EBI_SDRAM_ENABLE (1 << 1) +#define HMATRIX_EBI_NAND_ENABLE (1 << 3) +#define HMATRIX_EBI_CF0_ENABLE (1 << 4) +#define HMATRIX_EBI_CF1_ENABLE (1 << 5) +#define HMATRIX_EBI_PULLUP_DISABLE (1 << 8) + +/* + * Base addresses of controllers that may be accessed early by + * platform code. + */ +#define PM_BASE 0xfff00000 +#define HMATRIX_BASE 0xfff00800 +#define SDRAMC_BASE 0xfff03800 + +/* LCDC on port C */ +#define ATMEL_LCDC_PC_CC (1ULL << 19) +#define ATMEL_LCDC_PC_HSYNC (1ULL << 20) +#define ATMEL_LCDC_PC_PCLK (1ULL << 21) +#define ATMEL_LCDC_PC_VSYNC (1ULL << 22) +#define ATMEL_LCDC_PC_DVAL (1ULL << 23) +#define ATMEL_LCDC_PC_MODE (1ULL << 24) +#define ATMEL_LCDC_PC_PWR (1ULL << 25) +#define ATMEL_LCDC_PC_DATA0 (1ULL << 26) +#define ATMEL_LCDC_PC_DATA1 (1ULL << 27) +#define ATMEL_LCDC_PC_DATA2 (1ULL << 28) +#define ATMEL_LCDC_PC_DATA3 (1ULL << 29) +#define ATMEL_LCDC_PC_DATA4 (1ULL << 30) +#define ATMEL_LCDC_PC_DATA5 (1ULL << 31) + +/* LCDC on port D */ +#define ATMEL_LCDC_PD_DATA6 (1ULL << 0) +#define ATMEL_LCDC_PD_DATA7 (1ULL << 1) +#define ATMEL_LCDC_PD_DATA8 (1ULL << 2) +#define ATMEL_LCDC_PD_DATA9 (1ULL << 3) +#define ATMEL_LCDC_PD_DATA10 (1ULL << 4) +#define ATMEL_LCDC_PD_DATA11 (1ULL << 5) +#define ATMEL_LCDC_PD_DATA12 (1ULL << 6) +#define ATMEL_LCDC_PD_DATA13 (1ULL << 7) +#define ATMEL_LCDC_PD_DATA14 (1ULL << 8) +#define ATMEL_LCDC_PD_DATA15 (1ULL << 9) +#define ATMEL_LCDC_PD_DATA16 (1ULL << 10) +#define ATMEL_LCDC_PD_DATA17 (1ULL << 11) +#define ATMEL_LCDC_PD_DATA18 (1ULL << 12) +#define ATMEL_LCDC_PD_DATA19 (1ULL << 13) +#define ATMEL_LCDC_PD_DATA20 (1ULL << 14) +#define ATMEL_LCDC_PD_DATA21 (1ULL << 15) +#define ATMEL_LCDC_PD_DATA22 (1ULL << 16) +#define ATMEL_LCDC_PD_DATA23 (1ULL << 17) + +/* LCDC on port E */ +#define ATMEL_LCDC_PE_CC (1ULL << (32 + 0)) +#define ATMEL_LCDC_PE_DVAL (1ULL << (32 + 1)) +#define ATMEL_LCDC_PE_MODE (1ULL << (32 + 2)) +#define ATMEL_LCDC_PE_DATA0 (1ULL << (32 + 3)) +#define ATMEL_LCDC_PE_DATA1 (1ULL << (32 + 4)) +#define ATMEL_LCDC_PE_DATA2 (1ULL << (32 + 5)) +#define ATMEL_LCDC_PE_DATA3 (1ULL << (32 + 6)) +#define ATMEL_LCDC_PE_DATA4 (1ULL << (32 + 7)) +#define ATMEL_LCDC_PE_DATA8 (1ULL << (32 + 8)) +#define ATMEL_LCDC_PE_DATA9 (1ULL << (32 + 9)) +#define ATMEL_LCDC_PE_DATA10 (1ULL << (32 + 10)) +#define ATMEL_LCDC_PE_DATA11 (1ULL << (32 + 11)) +#define ATMEL_LCDC_PE_DATA12 (1ULL << (32 + 12)) +#define ATMEL_LCDC_PE_DATA16 (1ULL << (32 + 13)) +#define ATMEL_LCDC_PE_DATA17 (1ULL << (32 + 14)) +#define ATMEL_LCDC_PE_DATA18 (1ULL << (32 + 15)) +#define ATMEL_LCDC_PE_DATA19 (1ULL << (32 + 16)) +#define ATMEL_LCDC_PE_DATA20 (1ULL << (32 + 17)) +#define ATMEL_LCDC_PE_DATA21 (1ULL << (32 + 18)) + + +#define ATMEL_LCDC(PORT, PIN) (ATMEL_LCDC_##PORT##_##PIN) + + +#define ATMEL_LCDC_PRI_24B_DATA ( \ + ATMEL_LCDC(PC, DATA0) | ATMEL_LCDC(PC, DATA1) | \ + ATMEL_LCDC(PC, DATA2) | ATMEL_LCDC(PC, DATA3) | \ + ATMEL_LCDC(PC, DATA4) | ATMEL_LCDC(PC, DATA5) | \ + ATMEL_LCDC(PD, DATA6) | ATMEL_LCDC(PD, DATA7) | \ + ATMEL_LCDC(PD, DATA8) | ATMEL_LCDC(PD, DATA9) | \ + ATMEL_LCDC(PD, DATA10) | ATMEL_LCDC(PD, DATA11) | \ + ATMEL_LCDC(PD, DATA12) | ATMEL_LCDC(PD, DATA13) | \ + ATMEL_LCDC(PD, DATA14) | ATMEL_LCDC(PD, DATA15) | \ + ATMEL_LCDC(PD, DATA16) | ATMEL_LCDC(PD, DATA17) | \ + ATMEL_LCDC(PD, DATA18) | ATMEL_LCDC(PD, DATA19) | \ + ATMEL_LCDC(PD, DATA20) | ATMEL_LCDC(PD, DATA21) | \ + ATMEL_LCDC(PD, DATA22) | ATMEL_LCDC(PD, DATA23)) + +#define ATMEL_LCDC_ALT_24B_DATA ( \ + ATMEL_LCDC(PE, DATA0) | ATMEL_LCDC(PE, DATA1) | \ + ATMEL_LCDC(PE, DATA2) | ATMEL_LCDC(PE, DATA3) | \ + ATMEL_LCDC(PE, DATA4) | ATMEL_LCDC(PC, DATA5) | \ + ATMEL_LCDC(PD, DATA6) | ATMEL_LCDC(PD, DATA7) | \ + ATMEL_LCDC(PE, DATA8) | ATMEL_LCDC(PE, DATA9) | \ + ATMEL_LCDC(PE, DATA10) | ATMEL_LCDC(PE, DATA11) | \ + ATMEL_LCDC(PE, DATA12) | ATMEL_LCDC(PD, DATA13) | \ + ATMEL_LCDC(PD, DATA14) | ATMEL_LCDC(PD, DATA15) | \ + ATMEL_LCDC(PE, DATA16) | ATMEL_LCDC(PE, DATA17) | \ + ATMEL_LCDC(PE, DATA18) | ATMEL_LCDC(PE, DATA19) | \ + ATMEL_LCDC(PE, DATA20) | ATMEL_LCDC(PE, DATA21) | \ + ATMEL_LCDC(PD, DATA22) | ATMEL_LCDC(PD, DATA23)) + +#define ATMEL_LCDC_PRI_18B_DATA ( \ + ATMEL_LCDC(PC, DATA2) | ATMEL_LCDC(PC, DATA3) | \ + ATMEL_LCDC(PC, DATA4) | ATMEL_LCDC(PC, DATA5) | \ + ATMEL_LCDC(PD, DATA6) | ATMEL_LCDC(PD, DATA7) | \ + ATMEL_LCDC(PD, DATA10) | ATMEL_LCDC(PD, DATA11) | \ + ATMEL_LCDC(PD, DATA12) | ATMEL_LCDC(PD, DATA13) | \ + ATMEL_LCDC(PD, DATA14) | ATMEL_LCDC(PD, DATA15) | \ + ATMEL_LCDC(PD, DATA18) | ATMEL_LCDC(PD, DATA19) | \ + ATMEL_LCDC(PD, DATA20) | ATMEL_LCDC(PD, DATA21) | \ + ATMEL_LCDC(PD, DATA22) | ATMEL_LCDC(PD, DATA23)) + +#define ATMEL_LCDC_ALT_18B_DATA ( \ + ATMEL_LCDC(PE, DATA2) | ATMEL_LCDC(PE, DATA3) | \ + ATMEL_LCDC(PE, DATA4) | ATMEL_LCDC(PC, DATA5) | \ + ATMEL_LCDC(PD, DATA6) | ATMEL_LCDC(PD, DATA7) | \ + ATMEL_LCDC(PE, DATA10) | ATMEL_LCDC(PE, DATA11) | \ + ATMEL_LCDC(PE, DATA12) | ATMEL_LCDC(PD, DATA13) | \ + ATMEL_LCDC(PD, DATA14) | ATMEL_LCDC(PD, DATA15) | \ + ATMEL_LCDC(PE, DATA18) | ATMEL_LCDC(PE, DATA19) | \ + ATMEL_LCDC(PE, DATA20) | ATMEL_LCDC(PE, DATA21) | \ + ATMEL_LCDC(PD, DATA22) | ATMEL_LCDC(PD, DATA23)) + +#define ATMEL_LCDC_PRI_15B_DATA ( \ + ATMEL_LCDC(PC, DATA3) | ATMEL_LCDC(PC, DATA4) | \ + ATMEL_LCDC(PC, DATA5) | ATMEL_LCDC(PD, DATA6) | \ + ATMEL_LCDC(PD, DATA7) | \ + ATMEL_LCDC(PD, DATA11) | ATMEL_LCDC(PD, DATA12) | \ + ATMEL_LCDC(PD, DATA13) | ATMEL_LCDC(PD, DATA14) | \ + ATMEL_LCDC(PD, DATA15) | \ + ATMEL_LCDC(PD, DATA19) | ATMEL_LCDC(PD, DATA20) | \ + ATMEL_LCDC(PD, DATA21) | ATMEL_LCDC(PD, DATA22) | \ + ATMEL_LCDC(PD, DATA23)) + +#define ATMEL_LCDC_ALT_15B_DATA ( \ + ATMEL_LCDC(PE, DATA3) | ATMEL_LCDC(PE, DATA4) | \ + ATMEL_LCDC(PC, DATA5) | ATMEL_LCDC(PD, DATA6) | \ + ATMEL_LCDC(PD, DATA7) | \ + ATMEL_LCDC(PE, DATA11) | ATMEL_LCDC(PE, DATA12) | \ + ATMEL_LCDC(PD, DATA13) | ATMEL_LCDC(PD, DATA14) | \ + ATMEL_LCDC(PD, DATA15) | \ + ATMEL_LCDC(PE, DATA19) | ATMEL_LCDC(PE, DATA20) | \ + ATMEL_LCDC(PE, DATA21) | ATMEL_LCDC(PD, DATA22) | \ + ATMEL_LCDC(PD, DATA23)) + +#define ATMEL_LCDC_PRI_CONTROL ( \ + ATMEL_LCDC(PC, CC) | ATMEL_LCDC(PC, DVAL) | \ + ATMEL_LCDC(PC, MODE) | ATMEL_LCDC(PC, PWR)) + +#define ATMEL_LCDC_ALT_CONTROL ( \ + ATMEL_LCDC(PE, CC) | ATMEL_LCDC(PE, DVAL) | \ + ATMEL_LCDC(PE, MODE) | ATMEL_LCDC(PC, PWR)) + +#define ATMEL_LCDC_CONTROL ( \ + ATMEL_LCDC(PC, HSYNC) | ATMEL_LCDC(PC, VSYNC) | \ + ATMEL_LCDC(PC, PCLK)) + +#define ATMEL_LCDC_PRI_24BIT (ATMEL_LCDC_CONTROL | ATMEL_LCDC_PRI_24B_DATA) + +#define ATMEL_LCDC_ALT_24BIT (ATMEL_LCDC_CONTROL | ATMEL_LCDC_ALT_24B_DATA) + +#define ATMEL_LCDC_PRI_18BIT (ATMEL_LCDC_CONTROL | ATMEL_LCDC_PRI_18B_DATA) + +#define ATMEL_LCDC_ALT_18BIT (ATMEL_LCDC_CONTROL | ATMEL_LCDC_ALT_18B_DATA) + +#define ATMEL_LCDC_PRI_15BIT (ATMEL_LCDC_CONTROL | ATMEL_LCDC_PRI_15B_DATA) + +#define ATMEL_LCDC_ALT_15BIT (ATMEL_LCDC_CONTROL | ATMEL_LCDC_ALT_15B_DATA) + +/* Bitmask for all EBI data (D16..D31) pins on port E */ +#define ATMEL_EBI_PE_DATA_ALL (0x0000FFFF) + +#endif /* __ASM_ARCH_AT32AP700X_H__ */ diff --git a/arch/avr32/mach-at32ap/include/mach/board.h b/arch/avr32/mach-at32ap/include/mach/board.h new file mode 100644 index 000000000..f1a316d52 --- /dev/null +++ b/arch/avr32/mach-at32ap/include/mach/board.h @@ -0,0 +1,115 @@ +/* + * Platform data definitions. + */ +#ifndef __ASM_ARCH_BOARD_H +#define __ASM_ARCH_BOARD_H + +#include <linux/types.h> +#include <linux/serial.h> +#include <linux/platform_data/macb.h> +#include <linux/platform_data/atmel.h> + +#define GPIO_PIN_NONE (-1) + +/* + * Clock rates for various on-board oscillators. The number of entries + * in this array is chip-dependent. + */ +extern unsigned long at32_board_osc_rates[]; + +/* + * This used to add essential system devices, but this is now done + * automatically. Please don't use it in new board code. + */ +static inline void __deprecated at32_add_system_devices(void) +{ + +} + +extern struct platform_device *atmel_default_console_device; + +/* Flags for selecting USART extra pins */ +#define ATMEL_USART_RTS 0x01 +#define ATMEL_USART_CTS 0x02 +#define ATMEL_USART_CLK 0x04 + +void at32_map_usart(unsigned int hw_id, unsigned int line, int flags); +struct platform_device *at32_add_device_usart(unsigned int id); + +struct platform_device * +at32_add_device_eth(unsigned int id, struct macb_platform_data *data); + +struct spi_board_info; +struct platform_device * +at32_add_device_spi(unsigned int id, struct spi_board_info *b, unsigned int n); +void at32_spi_setup_slaves(unsigned int bus_num, struct spi_board_info *b, unsigned int n); + +struct atmel_lcdfb_pdata; +struct platform_device * +at32_add_device_lcdc(unsigned int id, struct atmel_lcdfb_pdata *data, + unsigned long fbmem_start, unsigned long fbmem_len, + u64 pin_mask); + +struct usba_platform_data; +struct platform_device * +at32_add_device_usba(unsigned int id, struct usba_platform_data *data); + +struct ide_platform_data { + u8 cs; +}; +struct platform_device * +at32_add_device_ide(unsigned int id, unsigned int extint, + struct ide_platform_data *data); + +/* mask says which PWM channels to mux */ +struct platform_device *at32_add_device_pwm(u32 mask); + +/* depending on what's hooked up, not all SSC pins will be used */ +#define ATMEL_SSC_TK 0x01 +#define ATMEL_SSC_TF 0x02 +#define ATMEL_SSC_TD 0x04 +#define ATMEL_SSC_TX (ATMEL_SSC_TK | ATMEL_SSC_TF | ATMEL_SSC_TD) + +#define ATMEL_SSC_RK 0x10 +#define ATMEL_SSC_RF 0x20 +#define ATMEL_SSC_RD 0x40 +#define ATMEL_SSC_RX (ATMEL_SSC_RK | ATMEL_SSC_RF | ATMEL_SSC_RD) + +struct platform_device * +at32_add_device_ssc(unsigned int id, unsigned int flags); + +struct i2c_board_info; +struct platform_device *at32_add_device_twi(unsigned int id, + struct i2c_board_info *b, + unsigned int n); + +struct mci_platform_data; +struct platform_device * +at32_add_device_mci(unsigned int id, struct mci_platform_data *data); + +struct ac97c_platform_data; +struct platform_device * +at32_add_device_ac97c(unsigned int id, struct ac97c_platform_data *data, + unsigned int flags); + +struct atmel_abdac_pdata; +struct platform_device * +at32_add_device_abdac(unsigned int id, struct atmel_abdac_pdata *data); + +struct platform_device *at32_add_device_psif(unsigned int id); + +struct cf_platform_data { + int detect_pin; + int reset_pin; + int vcc_pin; + int ready_pin; + u8 cs; +}; +struct platform_device * +at32_add_device_cf(unsigned int id, unsigned int extint, + struct cf_platform_data *data); + +struct platform_device * +at32_add_device_nand(unsigned int id, struct atmel_nand_data *data); + +#endif /* __ASM_ARCH_BOARD_H */ diff --git a/arch/avr32/mach-at32ap/include/mach/chip.h b/arch/avr32/mach-at32ap/include/mach/chip.h new file mode 100644 index 000000000..5efca6da6 --- /dev/null +++ b/arch/avr32/mach-at32ap/include/mach/chip.h @@ -0,0 +1,19 @@ +/* + * AVR32 chip-specific definitions + * + * Copyright (C) 2008 Atmel Corporation + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#ifndef __ASM_AVR32_ARCH_CHIP_H__ +#define __ASM_AVR32_ARCH_CHIP_H__ + +#if defined(CONFIG_CPU_AT32AP700X) +# include <mach/at32ap700x.h> +#else +# error Unknown chip type selected +#endif + +#endif /* __ASM_AVR32_ARCH_CHIP_H__ */ diff --git a/arch/avr32/mach-at32ap/include/mach/cpu.h b/arch/avr32/mach-at32ap/include/mach/cpu.h new file mode 100644 index 000000000..4181086f4 --- /dev/null +++ b/arch/avr32/mach-at32ap/include/mach/cpu.h @@ -0,0 +1,23 @@ +/* + * AVR32 CPU identification + * + * Copyright (C) 2007 Atmel Corporation + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#ifndef __ASM_ARCH_CPU_H +#define __ASM_ARCH_CPU_H + +/* + * Only AT32AP7000 is defined for now. We can identify the specific + * chip at runtime, but I'm not sure if it's really worth it. + */ +#ifdef CONFIG_CPU_AT32AP700X +# define cpu_is_at32ap7000() (1) +#else +# define cpu_is_at32ap7000() (0) +#endif + +#endif /* __ASM_ARCH_CPU_H */ diff --git a/arch/avr32/mach-at32ap/include/mach/gpio.h b/arch/avr32/mach-at32ap/include/mach/gpio.h new file mode 100644 index 000000000..0180f584e --- /dev/null +++ b/arch/avr32/mach-at32ap/include/mach/gpio.h @@ -0,0 +1,45 @@ +#ifndef __ASM_AVR32_ARCH_GPIO_H +#define __ASM_AVR32_ARCH_GPIO_H + +#include <linux/compiler.h> +#include <asm/irq.h> + + +/* Some GPIO chips can manage IRQs; some can't. The exact numbers can + * be changed if needed, but for the moment they're not configurable. + */ +#define ARCH_NR_GPIOS (NR_GPIO_IRQS + 2 * 32) + + +/* Arch-neutral GPIO API, supporting both "native" and external GPIOs. */ +#include <asm-generic/gpio.h> + +static inline int gpio_get_value(unsigned int gpio) +{ + return __gpio_get_value(gpio); +} + +static inline void gpio_set_value(unsigned int gpio, int value) +{ + __gpio_set_value(gpio, value); +} + +static inline int gpio_cansleep(unsigned int gpio) +{ + return __gpio_cansleep(gpio); +} + + +static inline int gpio_to_irq(unsigned int gpio) +{ + if (gpio < NR_GPIO_IRQS) + return gpio + GPIO_IRQ_BASE; + return -EINVAL; +} + +static inline int irq_to_gpio(unsigned int irq) +{ + return irq - GPIO_IRQ_BASE; +} + +#endif /* __ASM_AVR32_ARCH_GPIO_H */ diff --git a/arch/avr32/mach-at32ap/include/mach/hmatrix.h b/arch/avr32/mach-at32ap/include/mach/hmatrix.h new file mode 100644 index 000000000..7a368f227 --- /dev/null +++ b/arch/avr32/mach-at32ap/include/mach/hmatrix.h @@ -0,0 +1,55 @@ +/* + * High-Speed Bus Matrix configuration registers + * + * Copyright (C) 2008 Atmel Corporation + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#ifndef __HMATRIX_H +#define __HMATRIX_H + +extern struct clk at32_hmatrix_clk; + +void hmatrix_write_reg(unsigned long offset, u32 value); +u32 hmatrix_read_reg(unsigned long offset); + +void hmatrix_sfr_set_bits(unsigned int slave_id, u32 mask); +void hmatrix_sfr_clear_bits(unsigned int slave_id, u32 mask); + +/* Master Configuration register */ +#define HMATRIX_MCFG(m) (0x0000 + 4 * (m)) +/* Undefined length burst limit */ +# define HMATRIX_MCFG_ULBT_INFINITE 0 /* Infinite length */ +# define HMATRIX_MCFG_ULBT_SINGLE 1 /* Single Access */ +# define HMATRIX_MCFG_ULBT_FOUR_BEAT 2 /* Four beat */ +# define HMATRIX_MCFG_ULBT_EIGHT_BEAT 3 /* Eight beat */ +# define HMATRIX_MCFG_ULBT_SIXTEEN_BEAT 4 /* Sixteen beat */ + +/* Slave Configuration register */ +#define HMATRIX_SCFG(s) (0x0040 + 4 * (s)) +# define HMATRIX_SCFG_SLOT_CYCLE(x) ((x) << 0) /* Max burst cycles */ +# define HMATRIX_SCFG_DEFMSTR_NONE ( 0 << 16) /* No default master */ +# define HMATRIX_SCFG_DEFMSTR_LAST ( 1 << 16) /* Last def master */ +# define HMATRIX_SCFG_DEFMSTR_FIXED ( 2 << 16) /* Fixed def master */ +# define HMATRIX_SCFG_FIXED_DEFMSTR(m) ((m) << 18) /* Fixed master ID */ +# define HMATRIX_SCFG_ARBT_ROUND_ROBIN ( 0 << 24) /* RR arbitration */ +# define HMATRIX_SCFG_ARBT_FIXED_PRIO ( 1 << 24) /* Fixed priority */ + +/* Slave Priority register A (master 0..7) */ +#define HMATRIX_PRAS(s) (0x0080 + 8 * (s)) +# define HMATRIX_PRAS_PRIO(m, p) ((p) << ((m) * 4)) + +/* Slave Priority register A (master 8..15) */ +#define HMATRIX_PRBS(s) (0x0084 + 8 * (s)) +# define HMATRIX_PRBS_PRIO(m, p) ((p) << (((m) - 8) * 4)) + +/* Master Remap Control Register */ +#define HMATRIX_MRCR 0x0100 +# define HMATRIX_MRCR_REMAP(m) ( 1 << (m)) /* Remap master m */ + +/* Special Function Register. Bit definitions are chip-specific */ +#define HMATRIX_SFR(s) (0x0110 + 4 * (s)) + +#endif /* __HMATRIX_H */ diff --git a/arch/avr32/mach-at32ap/include/mach/init.h b/arch/avr32/mach-at32ap/include/mach/init.h new file mode 100644 index 000000000..bc40e3d46 --- /dev/null +++ b/arch/avr32/mach-at32ap/include/mach/init.h @@ -0,0 +1,18 @@ +/* + * AT32AP platform initialization calls. + * + * Copyright (C) 2006 Atmel Corporation + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#ifndef __ASM_AVR32_AT32AP_INIT_H__ +#define __ASM_AVR32_AT32AP_INIT_H__ + +void setup_platform(void); +void setup_board(void); + +void at32_setup_serial_console(unsigned int usart_id); + +#endif /* __ASM_AVR32_AT32AP_INIT_H__ */ diff --git a/arch/avr32/mach-at32ap/include/mach/io.h b/arch/avr32/mach-at32ap/include/mach/io.h new file mode 100644 index 000000000..22ea79b74 --- /dev/null +++ b/arch/avr32/mach-at32ap/include/mach/io.h @@ -0,0 +1,38 @@ +#ifndef __ASM_AVR32_ARCH_AT32AP_IO_H +#define __ASM_AVR32_ARCH_AT32AP_IO_H + +#include <linux/swab.h> + +#if defined(CONFIG_AP700X_32_BIT_SMC) +# define __swizzle_addr_b(addr) (addr ^ 3UL) +# define __swizzle_addr_w(addr) (addr ^ 2UL) +# define __swizzle_addr_l(addr) (addr) +# define ioswabb(a, x) (x) +# define ioswabw(a, x) (x) +# define ioswabl(a, x) (x) +# define __mem_ioswabb(a, x) (x) +# define __mem_ioswabw(a, x) swab16(x) +# define __mem_ioswabl(a, x) swab32(x) +#elif defined(CONFIG_AP700X_16_BIT_SMC) +# define __swizzle_addr_b(addr) (addr ^ 1UL) +# define __swizzle_addr_w(addr) (addr) +# define __swizzle_addr_l(addr) (addr) +# define ioswabb(a, x) (x) +# define ioswabw(a, x) (x) +# define ioswabl(a, x) swahw32(x) +# define __mem_ioswabb(a, x) (x) +# define __mem_ioswabw(a, x) swab16(x) +# define __mem_ioswabl(a, x) swahb32(x) +#else +# define __swizzle_addr_b(addr) (addr) +# define __swizzle_addr_w(addr) (addr) +# define __swizzle_addr_l(addr) (addr) +# define ioswabb(a, x) (x) +# define ioswabw(a, x) swab16(x) +# define ioswabl(a, x) swab32(x) +# define __mem_ioswabb(a, x) (x) +# define __mem_ioswabw(a, x) (x) +# define __mem_ioswabl(a, x) (x) +#endif + +#endif /* __ASM_AVR32_ARCH_AT32AP_IO_H */ diff --git a/arch/avr32/mach-at32ap/include/mach/irq.h b/arch/avr32/mach-at32ap/include/mach/irq.h new file mode 100644 index 000000000..608e35036 --- /dev/null +++ b/arch/avr32/mach-at32ap/include/mach/irq.h @@ -0,0 +1,14 @@ +#ifndef __ASM_AVR32_ARCH_IRQ_H +#define __ASM_AVR32_ARCH_IRQ_H + +#define EIM_IRQ_BASE NR_INTERNAL_IRQS +#define NR_EIM_IRQS 32 +#define AT32_EXTINT(n) (EIM_IRQ_BASE + (n)) + +#define GPIO_IRQ_BASE (EIM_IRQ_BASE + NR_EIM_IRQS) +#define NR_GPIO_CTLR (5 /*internal*/ + 1 /*external*/) +#define NR_GPIO_IRQS (NR_GPIO_CTLR * 32) + +#define NR_IRQS (GPIO_IRQ_BASE + NR_GPIO_IRQS) + +#endif /* __ASM_AVR32_ARCH_IRQ_H */ diff --git a/arch/avr32/mach-at32ap/include/mach/pm.h b/arch/avr32/mach-at32ap/include/mach/pm.h new file mode 100644 index 000000000..f29ff2cd2 --- /dev/null +++ b/arch/avr32/mach-at32ap/include/mach/pm.h @@ -0,0 +1,27 @@ +/* + * AVR32 AP Power Management. + * + * Copyright (C) 2008 Atmel Corporation + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#ifndef __ASM_AVR32_ARCH_PM_H +#define __ASM_AVR32_ARCH_PM_H + +/* Possible arguments to the "sleep" instruction */ +#define CPU_SLEEP_IDLE 0 +#define CPU_SLEEP_FROZEN 1 +#define CPU_SLEEP_STANDBY 2 +#define CPU_SLEEP_STOP 3 +#define CPU_SLEEP_STATIC 5 + +#ifndef __ASSEMBLY__ +extern void cpu_enter_idle(void); +extern void cpu_enter_standby(unsigned long sdramc_base); + +void intc_set_suspend_handler(unsigned long offset); +#endif + +#endif /* __ASM_AVR32_ARCH_PM_H */ diff --git a/arch/avr32/mach-at32ap/include/mach/portmux.h b/arch/avr32/mach-at32ap/include/mach/portmux.h new file mode 100644 index 000000000..4873024e3 --- /dev/null +++ b/arch/avr32/mach-at32ap/include/mach/portmux.h @@ -0,0 +1,30 @@ +/* + * AT32 portmux interface. + * + * Copyright (C) 2006 Atmel Corporation + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#ifndef __ASM_ARCH_PORTMUX_H__ +#define __ASM_ARCH_PORTMUX_H__ + +/* + * Set up pin multiplexing, called from board init only. + * + * The following flags determine the initial state of the pin. + */ +#define AT32_GPIOF_PULLUP 0x00000001 /* (not-OUT) Enable pull-up */ +#define AT32_GPIOF_OUTPUT 0x00000002 /* (OUT) Enable output driver */ +#define AT32_GPIOF_HIGH 0x00000004 /* (OUT) Set output high */ +#define AT32_GPIOF_DEGLITCH 0x00000008 /* (IN) Filter glitches */ +#define AT32_GPIOF_MULTIDRV 0x00000010 /* Enable multidriver option */ + +void at32_select_periph(unsigned int port, unsigned int pin, + unsigned int periph, unsigned long flags); +void at32_select_gpio(unsigned int pin, unsigned long flags); +void at32_deselect_pin(unsigned int pin); +void at32_reserve_pin(unsigned int port, u32 pin_mask); + +#endif /* __ASM_ARCH_PORTMUX_H__ */ diff --git a/arch/avr32/mach-at32ap/include/mach/smc.h b/arch/avr32/mach-at32ap/include/mach/smc.h new file mode 100644 index 000000000..c98eea44a --- /dev/null +++ b/arch/avr32/mach-at32ap/include/mach/smc.h @@ -0,0 +1,113 @@ +/* + * Static Memory Controller for AT32 chips + * + * Copyright (C) 2006 Atmel Corporation + * + * Inspired by the OMAP2 General-Purpose Memory Controller interface + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#ifndef __ARCH_AT32AP_SMC_H +#define __ARCH_AT32AP_SMC_H + +/* + * All timing parameters are in nanoseconds. + */ +struct smc_timing { + /* Delay from address valid to assertion of given strobe */ + int ncs_read_setup; + int nrd_setup; + int ncs_write_setup; + int nwe_setup; + + /* Pulse length of given strobe */ + int ncs_read_pulse; + int nrd_pulse; + int ncs_write_pulse; + int nwe_pulse; + + /* Total cycle length of given operation */ + int read_cycle; + int write_cycle; + + /* Minimal recovery times, will extend cycle if needed */ + int ncs_read_recover; + int nrd_recover; + int ncs_write_recover; + int nwe_recover; +}; + +/* + * All timing parameters are in clock cycles. + */ +struct smc_config { + + /* Delay from address valid to assertion of given strobe */ + u8 ncs_read_setup; + u8 nrd_setup; + u8 ncs_write_setup; + u8 nwe_setup; + + /* Pulse length of given strobe */ + u8 ncs_read_pulse; + u8 nrd_pulse; + u8 ncs_write_pulse; + u8 nwe_pulse; + + /* Total cycle length of given operation */ + u8 read_cycle; + u8 write_cycle; + + /* Bus width in bytes */ + u8 bus_width; + + /* + * 0: Data is sampled on rising edge of NCS + * 1: Data is sampled on rising edge of NRD + */ + unsigned int nrd_controlled:1; + + /* + * 0: Data is driven on falling edge of NCS + * 1: Data is driven on falling edge of NWR + */ + unsigned int nwe_controlled:1; + + /* + * 0: NWAIT is disabled + * 1: Reserved + * 2: NWAIT is frozen mode + * 3: NWAIT in ready mode + */ + unsigned int nwait_mode:2; + + /* + * 0: Byte select access type + * 1: Byte write access type + */ + unsigned int byte_write:1; + + /* + * Number of clock cycles before data is released after + * the rising edge of the read controlling signal + * + * Total cycles from SMC is tdf_cycles + 1 + */ + unsigned int tdf_cycles:4; + + /* + * 0: TDF optimization disabled + * 1: TDF optimization enabled + */ + unsigned int tdf_mode:1; +}; + +extern void smc_set_timing(struct smc_config *config, + const struct smc_timing *timing); + +extern int smc_set_configuration(int cs, const struct smc_config *config); +extern struct smc_config *smc_get_configuration(int cs); + +#endif /* __ARCH_AT32AP_SMC_H */ diff --git a/arch/avr32/mach-at32ap/include/mach/sram.h b/arch/avr32/mach-at32ap/include/mach/sram.h new file mode 100644 index 000000000..4838dae76 --- /dev/null +++ b/arch/avr32/mach-at32ap/include/mach/sram.h @@ -0,0 +1,30 @@ +/* + * Simple SRAM allocator + * + * Copyright (C) 2008 Atmel Corporation + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#ifndef __ASM_AVR32_ARCH_SRAM_H +#define __ASM_AVR32_ARCH_SRAM_H + +#include <linux/genalloc.h> + +extern struct gen_pool *sram_pool; + +static inline unsigned long sram_alloc(size_t len) +{ + if (!sram_pool) + return 0UL; + + return gen_pool_alloc(sram_pool, len); +} + +static inline void sram_free(unsigned long addr, size_t len) +{ + return gen_pool_free(sram_pool, addr, len); +} + +#endif /* __ASM_AVR32_ARCH_SRAM_H */ diff --git a/arch/avr32/mach-at32ap/intc.c b/arch/avr32/mach-at32ap/intc.c new file mode 100644 index 000000000..aaff83cc5 --- /dev/null +++ b/arch/avr32/mach-at32ap/intc.c @@ -0,0 +1,200 @@ +/* + * Copyright (C) 2006, 2008 Atmel Corporation + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/clk.h> +#include <linux/err.h> +#include <linux/init.h> +#include <linux/interrupt.h> +#include <linux/irq.h> +#include <linux/platform_device.h> +#include <linux/syscore_ops.h> +#include <linux/export.h> + +#include <asm/io.h> + +#include "intc.h" + +struct intc { + void __iomem *regs; + struct irq_chip chip; +#ifdef CONFIG_PM + unsigned long suspend_ipr; + unsigned long saved_ipr[64]; +#endif +}; + +extern struct platform_device at32_intc0_device; + +/* + * TODO: We may be able to implement mask/unmask by setting IxM flags + * in the status register. + */ +static void intc_mask_irq(struct irq_data *d) +{ + +} + +static void intc_unmask_irq(struct irq_data *d) +{ + +} + +static struct intc intc0 = { + .chip = { + .name = "intc", + .irq_mask = intc_mask_irq, + .irq_unmask = intc_unmask_irq, + }, +}; + +/* + * All interrupts go via intc at some point. + */ +asmlinkage void do_IRQ(int level, struct pt_regs *regs) +{ + struct pt_regs *old_regs; + unsigned int irq; + unsigned long status_reg; + + local_irq_disable(); + + old_regs = set_irq_regs(regs); + + irq_enter(); + + irq = intc_readl(&intc0, INTCAUSE0 - 4 * level); + generic_handle_irq(irq); + + /* + * Clear all interrupt level masks so that we may handle + * interrupts during softirq processing. If this is a nested + * interrupt, interrupts must stay globally disabled until we + * return. + */ + status_reg = sysreg_read(SR); + status_reg &= ~(SYSREG_BIT(I0M) | SYSREG_BIT(I1M) + | SYSREG_BIT(I2M) | SYSREG_BIT(I3M)); + sysreg_write(SR, status_reg); + + irq_exit(); + + set_irq_regs(old_regs); +} + +void __init init_IRQ(void) +{ + extern void _evba(void); + extern void irq_level0(void); + struct resource *regs; + struct clk *pclk; + unsigned int i; + u32 offset, readback; + + regs = platform_get_resource(&at32_intc0_device, IORESOURCE_MEM, 0); + if (!regs) { + printk(KERN_EMERG "intc: no mmio resource defined\n"); + goto fail; + } + pclk = clk_get(&at32_intc0_device.dev, "pclk"); + if (IS_ERR(pclk)) { + printk(KERN_EMERG "intc: no clock defined\n"); + goto fail; + } + + clk_enable(pclk); + + intc0.regs = ioremap(regs->start, resource_size(regs)); + if (!intc0.regs) { + printk(KERN_EMERG "intc: failed to map registers (0x%08lx)\n", + (unsigned long)regs->start); + goto fail; + } + + /* + * Initialize all interrupts to level 0 (lowest priority). The + * priority level may be changed by calling + * irq_set_priority(). + * + */ + offset = (unsigned long)&irq_level0 - (unsigned long)&_evba; + for (i = 0; i < NR_INTERNAL_IRQS; i++) { + intc_writel(&intc0, INTPR0 + 4 * i, offset); + readback = intc_readl(&intc0, INTPR0 + 4 * i); + if (readback == offset) + irq_set_chip_and_handler(i, &intc0.chip, + handle_simple_irq); + } + + /* Unmask all interrupt levels */ + sysreg_write(SR, (sysreg_read(SR) + & ~(SR_I3M | SR_I2M | SR_I1M | SR_I0M))); + + return; + +fail: + panic("Interrupt controller initialization failed!\n"); +} + +#ifdef CONFIG_PM +void intc_set_suspend_handler(unsigned long offset) +{ + intc0.suspend_ipr = offset; +} + +static int intc_suspend(void) +{ + int i; + + if (unlikely(!irqs_disabled())) { + pr_err("intc_suspend: called with interrupts enabled\n"); + return -EINVAL; + } + + if (unlikely(!intc0.suspend_ipr)) { + pr_err("intc_suspend: suspend_ipr not initialized\n"); + return -EINVAL; + } + + for (i = 0; i < 64; i++) { + intc0.saved_ipr[i] = intc_readl(&intc0, INTPR0 + 4 * i); + intc_writel(&intc0, INTPR0 + 4 * i, intc0.suspend_ipr); + } + + return 0; +} + +static void intc_resume(void) +{ + int i; + + for (i = 0; i < 64; i++) + intc_writel(&intc0, INTPR0 + 4 * i, intc0.saved_ipr[i]); +} +#else +#define intc_suspend NULL +#define intc_resume NULL +#endif + +static struct syscore_ops intc_syscore_ops = { + .suspend = intc_suspend, + .resume = intc_resume, +}; + +static int __init intc_init_syscore(void) +{ + register_syscore_ops(&intc_syscore_ops); + + return 0; +} +device_initcall(intc_init_syscore); + +unsigned long intc_get_pending(unsigned int group) +{ + return intc_readl(&intc0, INTREQ0 + 4 * group); +} +EXPORT_SYMBOL_GPL(intc_get_pending); diff --git a/arch/avr32/mach-at32ap/intc.h b/arch/avr32/mach-at32ap/intc.h new file mode 100644 index 000000000..4d3664e43 --- /dev/null +++ b/arch/avr32/mach-at32ap/intc.h @@ -0,0 +1,329 @@ +/* + * Automatically generated by gen-header.xsl + */ +#ifndef __ASM_AVR32_PERIHP_INTC_H__ +#define __ASM_AVR32_PERIHP_INTC_H__ + +#define INTC_NUM_INT_GRPS 33 + +#define INTC_INTPR0 0x0 +# define INTC_INTPR0_INTLEV_OFFSET 30 +# define INTC_INTPR0_INTLEV_SIZE 2 +# define INTC_INTPR0_OFFSET_OFFSET 0 +# define INTC_INTPR0_OFFSET_SIZE 24 +#define INTC_INTREQ0 0x100 +# define INTC_INTREQ0_IREQUEST0_OFFSET 0 +# define INTC_INTREQ0_IREQUEST0_SIZE 1 +# define INTC_INTREQ0_IREQUEST1_OFFSET 1 +# define INTC_INTREQ0_IREQUEST1_SIZE 1 +#define INTC_INTPR1 0x4 +# define INTC_INTPR1_INTLEV_OFFSET 30 +# define INTC_INTPR1_INTLEV_SIZE 2 +# define INTC_INTPR1_OFFSET_OFFSET 0 +# define INTC_INTPR1_OFFSET_SIZE 24 +#define INTC_INTREQ1 0x104 +# define INTC_INTREQ1_IREQUEST32_OFFSET 0 +# define INTC_INTREQ1_IREQUEST32_SIZE 1 +# define INTC_INTREQ1_IREQUEST33_OFFSET 1 +# define INTC_INTREQ1_IREQUEST33_SIZE 1 +# define INTC_INTREQ1_IREQUEST34_OFFSET 2 +# define INTC_INTREQ1_IREQUEST34_SIZE 1 +# define INTC_INTREQ1_IREQUEST35_OFFSET 3 +# define INTC_INTREQ1_IREQUEST35_SIZE 1 +# define INTC_INTREQ1_IREQUEST36_OFFSET 4 +# define INTC_INTREQ1_IREQUEST36_SIZE 1 +# define INTC_INTREQ1_IREQUEST37_OFFSET 5 +# define INTC_INTREQ1_IREQUEST37_SIZE 1 +#define INTC_INTPR2 0x8 +# define INTC_INTPR2_INTLEV_OFFSET 30 +# define INTC_INTPR2_INTLEV_SIZE 2 +# define INTC_INTPR2_OFFSET_OFFSET 0 +# define INTC_INTPR2_OFFSET_SIZE 24 +#define INTC_INTREQ2 0x108 +# define INTC_INTREQ2_IREQUEST64_OFFSET 0 +# define INTC_INTREQ2_IREQUEST64_SIZE 1 +# define INTC_INTREQ2_IREQUEST65_OFFSET 1 +# define INTC_INTREQ2_IREQUEST65_SIZE 1 +# define INTC_INTREQ2_IREQUEST66_OFFSET 2 +# define INTC_INTREQ2_IREQUEST66_SIZE 1 +# define INTC_INTREQ2_IREQUEST67_OFFSET 3 +# define INTC_INTREQ2_IREQUEST67_SIZE 1 +# define INTC_INTREQ2_IREQUEST68_OFFSET 4 +# define INTC_INTREQ2_IREQUEST68_SIZE 1 +#define INTC_INTPR3 0xc +# define INTC_INTPR3_INTLEV_OFFSET 30 +# define INTC_INTPR3_INTLEV_SIZE 2 +# define INTC_INTPR3_OFFSET_OFFSET 0 +# define INTC_INTPR3_OFFSET_SIZE 24 +#define INTC_INTREQ3 0x10c +# define INTC_INTREQ3_IREQUEST96_OFFSET 0 +# define INTC_INTREQ3_IREQUEST96_SIZE 1 +#define INTC_INTPR4 0x10 +# define INTC_INTPR4_INTLEV_OFFSET 30 +# define INTC_INTPR4_INTLEV_SIZE 2 +# define INTC_INTPR4_OFFSET_OFFSET 0 +# define INTC_INTPR4_OFFSET_SIZE 24 +#define INTC_INTREQ4 0x110 +# define INTC_INTREQ4_IREQUEST128_OFFSET 0 +# define INTC_INTREQ4_IREQUEST128_SIZE 1 +#define INTC_INTPR5 0x14 +# define INTC_INTPR5_INTLEV_OFFSET 30 +# define INTC_INTPR5_INTLEV_SIZE 2 +# define INTC_INTPR5_OFFSET_OFFSET 0 +# define INTC_INTPR5_OFFSET_SIZE 24 +#define INTC_INTREQ5 0x114 +# define INTC_INTREQ5_IREQUEST160_OFFSET 0 +# define INTC_INTREQ5_IREQUEST160_SIZE 1 +#define INTC_INTPR6 0x18 +# define INTC_INTPR6_INTLEV_OFFSET 30 +# define INTC_INTPR6_INTLEV_SIZE 2 +# define INTC_INTPR6_OFFSET_OFFSET 0 +# define INTC_INTPR6_OFFSET_SIZE 24 +#define INTC_INTREQ6 0x118 +# define INTC_INTREQ6_IREQUEST192_OFFSET 0 +# define INTC_INTREQ6_IREQUEST192_SIZE 1 +#define INTC_INTPR7 0x1c +# define INTC_INTPR7_INTLEV_OFFSET 30 +# define INTC_INTPR7_INTLEV_SIZE 2 +# define INTC_INTPR7_OFFSET_OFFSET 0 +# define INTC_INTPR7_OFFSET_SIZE 24 +#define INTC_INTREQ7 0x11c +# define INTC_INTREQ7_IREQUEST224_OFFSET 0 +# define INTC_INTREQ7_IREQUEST224_SIZE 1 +#define INTC_INTPR8 0x20 +# define INTC_INTPR8_INTLEV_OFFSET 30 +# define INTC_INTPR8_INTLEV_SIZE 2 +# define INTC_INTPR8_OFFSET_OFFSET 0 +# define INTC_INTPR8_OFFSET_SIZE 24 +#define INTC_INTREQ8 0x120 +# define INTC_INTREQ8_IREQUEST256_OFFSET 0 +# define INTC_INTREQ8_IREQUEST256_SIZE 1 +#define INTC_INTPR9 0x24 +# define INTC_INTPR9_INTLEV_OFFSET 30 +# define INTC_INTPR9_INTLEV_SIZE 2 +# define INTC_INTPR9_OFFSET_OFFSET 0 +# define INTC_INTPR9_OFFSET_SIZE 24 +#define INTC_INTREQ9 0x124 +# define INTC_INTREQ9_IREQUEST288_OFFSET 0 +# define INTC_INTREQ9_IREQUEST288_SIZE 1 +#define INTC_INTPR10 0x28 +# define INTC_INTPR10_INTLEV_OFFSET 30 +# define INTC_INTPR10_INTLEV_SIZE 2 +# define INTC_INTPR10_OFFSET_OFFSET 0 +# define INTC_INTPR10_OFFSET_SIZE 24 +#define INTC_INTREQ10 0x128 +# define INTC_INTREQ10_IREQUEST320_OFFSET 0 +# define INTC_INTREQ10_IREQUEST320_SIZE 1 +#define INTC_INTPR11 0x2c +# define INTC_INTPR11_INTLEV_OFFSET 30 +# define INTC_INTPR11_INTLEV_SIZE 2 +# define INTC_INTPR11_OFFSET_OFFSET 0 +# define INTC_INTPR11_OFFSET_SIZE 24 +#define INTC_INTREQ11 0x12c +# define INTC_INTREQ11_IREQUEST352_OFFSET 0 +# define INTC_INTREQ11_IREQUEST352_SIZE 1 +#define INTC_INTPR12 0x30 +# define INTC_INTPR12_INTLEV_OFFSET 30 +# define INTC_INTPR12_INTLEV_SIZE 2 +# define INTC_INTPR12_OFFSET_OFFSET 0 +# define INTC_INTPR12_OFFSET_SIZE 24 +#define INTC_INTREQ12 0x130 +# define INTC_INTREQ12_IREQUEST384_OFFSET 0 +# define INTC_INTREQ12_IREQUEST384_SIZE 1 +#define INTC_INTPR13 0x34 +# define INTC_INTPR13_INTLEV_OFFSET 30 +# define INTC_INTPR13_INTLEV_SIZE 2 +# define INTC_INTPR13_OFFSET_OFFSET 0 +# define INTC_INTPR13_OFFSET_SIZE 24 +#define INTC_INTREQ13 0x134 +# define INTC_INTREQ13_IREQUEST416_OFFSET 0 +# define INTC_INTREQ13_IREQUEST416_SIZE 1 +#define INTC_INTPR14 0x38 +# define INTC_INTPR14_INTLEV_OFFSET 30 +# define INTC_INTPR14_INTLEV_SIZE 2 +# define INTC_INTPR14_OFFSET_OFFSET 0 +# define INTC_INTPR14_OFFSET_SIZE 24 +#define INTC_INTREQ14 0x138 +# define INTC_INTREQ14_IREQUEST448_OFFSET 0 +# define INTC_INTREQ14_IREQUEST448_SIZE 1 +#define INTC_INTPR15 0x3c +# define INTC_INTPR15_INTLEV_OFFSET 30 +# define INTC_INTPR15_INTLEV_SIZE 2 +# define INTC_INTPR15_OFFSET_OFFSET 0 +# define INTC_INTPR15_OFFSET_SIZE 24 +#define INTC_INTREQ15 0x13c +# define INTC_INTREQ15_IREQUEST480_OFFSET 0 +# define INTC_INTREQ15_IREQUEST480_SIZE 1 +#define INTC_INTPR16 0x40 +# define INTC_INTPR16_INTLEV_OFFSET 30 +# define INTC_INTPR16_INTLEV_SIZE 2 +# define INTC_INTPR16_OFFSET_OFFSET 0 +# define INTC_INTPR16_OFFSET_SIZE 24 +#define INTC_INTREQ16 0x140 +# define INTC_INTREQ16_IREQUEST512_OFFSET 0 +# define INTC_INTREQ16_IREQUEST512_SIZE 1 +#define INTC_INTPR17 0x44 +# define INTC_INTPR17_INTLEV_OFFSET 30 +# define INTC_INTPR17_INTLEV_SIZE 2 +# define INTC_INTPR17_OFFSET_OFFSET 0 +# define INTC_INTPR17_OFFSET_SIZE 24 +#define INTC_INTREQ17 0x144 +# define INTC_INTREQ17_IREQUEST544_OFFSET 0 +# define INTC_INTREQ17_IREQUEST544_SIZE 1 +#define INTC_INTPR18 0x48 +# define INTC_INTPR18_INTLEV_OFFSET 30 +# define INTC_INTPR18_INTLEV_SIZE 2 +# define INTC_INTPR18_OFFSET_OFFSET 0 +# define INTC_INTPR18_OFFSET_SIZE 24 +#define INTC_INTREQ18 0x148 +# define INTC_INTREQ18_IREQUEST576_OFFSET 0 +# define INTC_INTREQ18_IREQUEST576_SIZE 1 +#define INTC_INTPR19 0x4c +# define INTC_INTPR19_INTLEV_OFFSET 30 +# define INTC_INTPR19_INTLEV_SIZE 2 +# define INTC_INTPR19_OFFSET_OFFSET 0 +# define INTC_INTPR19_OFFSET_SIZE 24 +#define INTC_INTREQ19 0x14c +# define INTC_INTREQ19_IREQUEST608_OFFSET 0 +# define INTC_INTREQ19_IREQUEST608_SIZE 1 +# define INTC_INTREQ19_IREQUEST609_OFFSET 1 +# define INTC_INTREQ19_IREQUEST609_SIZE 1 +# define INTC_INTREQ19_IREQUEST610_OFFSET 2 +# define INTC_INTREQ19_IREQUEST610_SIZE 1 +# define INTC_INTREQ19_IREQUEST611_OFFSET 3 +# define INTC_INTREQ19_IREQUEST611_SIZE 1 +#define INTC_INTPR20 0x50 +# define INTC_INTPR20_INTLEV_OFFSET 30 +# define INTC_INTPR20_INTLEV_SIZE 2 +# define INTC_INTPR20_OFFSET_OFFSET 0 +# define INTC_INTPR20_OFFSET_SIZE 24 +#define INTC_INTREQ20 0x150 +# define INTC_INTREQ20_IREQUEST640_OFFSET 0 +# define INTC_INTREQ20_IREQUEST640_SIZE 1 +#define INTC_INTPR21 0x54 +# define INTC_INTPR21_INTLEV_OFFSET 30 +# define INTC_INTPR21_INTLEV_SIZE 2 +# define INTC_INTPR21_OFFSET_OFFSET 0 +# define INTC_INTPR21_OFFSET_SIZE 24 +#define INTC_INTREQ21 0x154 +# define INTC_INTREQ21_IREQUEST672_OFFSET 0 +# define INTC_INTREQ21_IREQUEST672_SIZE 1 +#define INTC_INTPR22 0x58 +# define INTC_INTPR22_INTLEV_OFFSET 30 +# define INTC_INTPR22_INTLEV_SIZE 2 +# define INTC_INTPR22_OFFSET_OFFSET 0 +# define INTC_INTPR22_OFFSET_SIZE 24 +#define INTC_INTREQ22 0x158 +# define INTC_INTREQ22_IREQUEST704_OFFSET 0 +# define INTC_INTREQ22_IREQUEST704_SIZE 1 +# define INTC_INTREQ22_IREQUEST705_OFFSET 1 +# define INTC_INTREQ22_IREQUEST705_SIZE 1 +# define INTC_INTREQ22_IREQUEST706_OFFSET 2 +# define INTC_INTREQ22_IREQUEST706_SIZE 1 +#define INTC_INTPR23 0x5c +# define INTC_INTPR23_INTLEV_OFFSET 30 +# define INTC_INTPR23_INTLEV_SIZE 2 +# define INTC_INTPR23_OFFSET_OFFSET 0 +# define INTC_INTPR23_OFFSET_SIZE 24 +#define INTC_INTREQ23 0x15c +# define INTC_INTREQ23_IREQUEST736_OFFSET 0 +# define INTC_INTREQ23_IREQUEST736_SIZE 1 +# define INTC_INTREQ23_IREQUEST737_OFFSET 1 +# define INTC_INTREQ23_IREQUEST737_SIZE 1 +# define INTC_INTREQ23_IREQUEST738_OFFSET 2 +# define INTC_INTREQ23_IREQUEST738_SIZE 1 +#define INTC_INTPR24 0x60 +# define INTC_INTPR24_INTLEV_OFFSET 30 +# define INTC_INTPR24_INTLEV_SIZE 2 +# define INTC_INTPR24_OFFSET_OFFSET 0 +# define INTC_INTPR24_OFFSET_SIZE 24 +#define INTC_INTREQ24 0x160 +# define INTC_INTREQ24_IREQUEST768_OFFSET 0 +# define INTC_INTREQ24_IREQUEST768_SIZE 1 +#define INTC_INTPR25 0x64 +# define INTC_INTPR25_INTLEV_OFFSET 30 +# define INTC_INTPR25_INTLEV_SIZE 2 +# define INTC_INTPR25_OFFSET_OFFSET 0 +# define INTC_INTPR25_OFFSET_SIZE 24 +#define INTC_INTREQ25 0x164 +# define INTC_INTREQ25_IREQUEST800_OFFSET 0 +# define INTC_INTREQ25_IREQUEST800_SIZE 1 +#define INTC_INTPR26 0x68 +# define INTC_INTPR26_INTLEV_OFFSET 30 +# define INTC_INTPR26_INTLEV_SIZE 2 +# define INTC_INTPR26_OFFSET_OFFSET 0 +# define INTC_INTPR26_OFFSET_SIZE 24 +#define INTC_INTREQ26 0x168 +# define INTC_INTREQ26_IREQUEST832_OFFSET 0 +# define INTC_INTREQ26_IREQUEST832_SIZE 1 +#define INTC_INTPR27 0x6c +# define INTC_INTPR27_INTLEV_OFFSET 30 +# define INTC_INTPR27_INTLEV_SIZE 2 +# define INTC_INTPR27_OFFSET_OFFSET 0 +# define INTC_INTPR27_OFFSET_SIZE 24 +#define INTC_INTREQ27 0x16c +# define INTC_INTREQ27_IREQUEST864_OFFSET 0 +# define INTC_INTREQ27_IREQUEST864_SIZE 1 +#define INTC_INTPR28 0x70 +# define INTC_INTPR28_INTLEV_OFFSET 30 +# define INTC_INTPR28_INTLEV_SIZE 2 +# define INTC_INTPR28_OFFSET_OFFSET 0 +# define INTC_INTPR28_OFFSET_SIZE 24 +#define INTC_INTREQ28 0x170 +# define INTC_INTREQ28_IREQUEST896_OFFSET 0 +# define INTC_INTREQ28_IREQUEST896_SIZE 1 +#define INTC_INTPR29 0x74 +# define INTC_INTPR29_INTLEV_OFFSET 30 +# define INTC_INTPR29_INTLEV_SIZE 2 +# define INTC_INTPR29_OFFSET_OFFSET 0 +# define INTC_INTPR29_OFFSET_SIZE 24 +#define INTC_INTREQ29 0x174 +# define INTC_INTREQ29_IREQUEST928_OFFSET 0 +# define INTC_INTREQ29_IREQUEST928_SIZE 1 +#define INTC_INTPR30 0x78 +# define INTC_INTPR30_INTLEV_OFFSET 30 +# define INTC_INTPR30_INTLEV_SIZE 2 +# define INTC_INTPR30_OFFSET_OFFSET 0 +# define INTC_INTPR30_OFFSET_SIZE 24 +#define INTC_INTREQ30 0x178 +# define INTC_INTREQ30_IREQUEST960_OFFSET 0 +# define INTC_INTREQ30_IREQUEST960_SIZE 1 +#define INTC_INTPR31 0x7c +# define INTC_INTPR31_INTLEV_OFFSET 30 +# define INTC_INTPR31_INTLEV_SIZE 2 +# define INTC_INTPR31_OFFSET_OFFSET 0 +# define INTC_INTPR31_OFFSET_SIZE 24 +#define INTC_INTREQ31 0x17c +# define INTC_INTREQ31_IREQUEST992_OFFSET 0 +# define INTC_INTREQ31_IREQUEST992_SIZE 1 +#define INTC_INTPR32 0x80 +# define INTC_INTPR32_INTLEV_OFFSET 30 +# define INTC_INTPR32_INTLEV_SIZE 2 +# define INTC_INTPR32_OFFSET_OFFSET 0 +# define INTC_INTPR32_OFFSET_SIZE 24 +#define INTC_INTREQ32 0x180 +# define INTC_INTREQ32_IREQUEST1024_OFFSET 0 +# define INTC_INTREQ32_IREQUEST1024_SIZE 1 +#define INTC_INTCAUSE0 0x20c +# define INTC_INTCAUSE0_CAUSEGRP_OFFSET 0 +# define INTC_INTCAUSE0_CAUSEGRP_SIZE 6 +#define INTC_INTCAUSE1 0x208 +# define INTC_INTCAUSE1_CAUSEGRP_OFFSET 0 +# define INTC_INTCAUSE1_CAUSEGRP_SIZE 6 +#define INTC_INTCAUSE2 0x204 +# define INTC_INTCAUSE2_CAUSEGRP_OFFSET 0 +# define INTC_INTCAUSE2_CAUSEGRP_SIZE 6 +#define INTC_INTCAUSE3 0x200 +# define INTC_INTCAUSE3_CAUSEGRP_OFFSET 0 +# define INTC_INTCAUSE3_CAUSEGRP_SIZE 6 + +#define INTC_BIT(name) (1 << INTC_##name##_OFFSET) +#define INTC_MKBF(name, value) (((value) & ((1 << INTC_##name##_SIZE) - 1)) << INTC_##name##_OFFSET) +#define INTC_GETBF(name, value) (((value) >> INTC_##name##_OFFSET) & ((1 << INTC_##name##_SIZE) - 1)) + +#define intc_readl(port,reg) \ + __raw_readl((port)->regs + INTC_##reg) +#define intc_writel(port,reg,value) \ + __raw_writel((value), (port)->regs + INTC_##reg) + +#endif /* __ASM_AVR32_PERIHP_INTC_H__ */ diff --git a/arch/avr32/mach-at32ap/pdc.c b/arch/avr32/mach-at32ap/pdc.c new file mode 100644 index 000000000..61ab15aae --- /dev/null +++ b/arch/avr32/mach-at32ap/pdc.c @@ -0,0 +1,47 @@ +/* + * Copyright (C) 2006 Atmel Corporation + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/clk.h> +#include <linux/err.h> +#include <linux/init.h> +#include <linux/platform_device.h> + +static int __init pdc_probe(struct platform_device *pdev) +{ + struct clk *pclk, *hclk; + + pclk = clk_get(&pdev->dev, "pclk"); + if (IS_ERR(pclk)) { + dev_err(&pdev->dev, "no pclk defined\n"); + return PTR_ERR(pclk); + } + hclk = clk_get(&pdev->dev, "hclk"); + if (IS_ERR(hclk)) { + dev_err(&pdev->dev, "no hclk defined\n"); + clk_put(pclk); + return PTR_ERR(hclk); + } + + clk_enable(pclk); + clk_enable(hclk); + + dev_info(&pdev->dev, "Atmel Peripheral DMA Controller enabled\n"); + return 0; +} + +static struct platform_driver pdc_driver = { + .driver = { + .name = "pdc", + }, +}; + +static int __init pdc_init(void) +{ + return platform_driver_probe(&pdc_driver, pdc_probe); +} +arch_initcall(pdc_init); diff --git a/arch/avr32/mach-at32ap/pio.c b/arch/avr32/mach-at32ap/pio.c new file mode 100644 index 000000000..903c7d81d --- /dev/null +++ b/arch/avr32/mach-at32ap/pio.c @@ -0,0 +1,470 @@ +/* + * Atmel PIO2 Port Multiplexer support + * + * Copyright (C) 2004-2006 Atmel Corporation + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/clk.h> +#include <linux/debugfs.h> +#include <linux/export.h> +#include <linux/fs.h> +#include <linux/platform_device.h> +#include <linux/irq.h> + +#include <asm/gpio.h> +#include <asm/io.h> + +#include <mach/portmux.h> + +#include "pio.h" + +#define MAX_NR_PIO_DEVICES 8 + +struct pio_device { + struct gpio_chip chip; + void __iomem *regs; + const struct platform_device *pdev; + struct clk *clk; + u32 pinmux_mask; + char name[8]; +}; + +static struct pio_device pio_dev[MAX_NR_PIO_DEVICES]; + +static struct pio_device *gpio_to_pio(unsigned int gpio) +{ + struct pio_device *pio; + unsigned int index; + + index = gpio >> 5; + if (index >= MAX_NR_PIO_DEVICES) + return NULL; + pio = &pio_dev[index]; + if (!pio->regs) + return NULL; + + return pio; +} + +/* Pin multiplexing API */ +static DEFINE_SPINLOCK(pio_lock); + +void __init at32_select_periph(unsigned int port, u32 pin_mask, + unsigned int periph, unsigned long flags) +{ + struct pio_device *pio; + + /* assign and verify pio */ + pio = gpio_to_pio(port); + if (unlikely(!pio)) { + printk(KERN_WARNING "pio: invalid port %u\n", port); + goto fail; + } + + /* Test if any of the requested pins is already muxed */ + spin_lock(&pio_lock); + if (unlikely(pio->pinmux_mask & pin_mask)) { + printk(KERN_WARNING "%s: pin(s) busy (requested 0x%x, busy 0x%x)\n", + pio->name, pin_mask, pio->pinmux_mask & pin_mask); + spin_unlock(&pio_lock); + goto fail; + } + + pio->pinmux_mask |= pin_mask; + + /* enable pull ups */ + pio_writel(pio, PUER, pin_mask); + + /* select either peripheral A or B */ + if (periph) + pio_writel(pio, BSR, pin_mask); + else + pio_writel(pio, ASR, pin_mask); + + /* enable peripheral control */ + pio_writel(pio, PDR, pin_mask); + + /* Disable pull ups if not requested. */ + if (!(flags & AT32_GPIOF_PULLUP)) + pio_writel(pio, PUDR, pin_mask); + + spin_unlock(&pio_lock); + + return; + +fail: + dump_stack(); +} + +void __init at32_select_gpio(unsigned int pin, unsigned long flags) +{ + struct pio_device *pio; + unsigned int pin_index = pin & 0x1f; + u32 mask = 1 << pin_index; + + pio = gpio_to_pio(pin); + if (unlikely(!pio)) { + printk("pio: invalid pin %u\n", pin); + goto fail; + } + + if (unlikely(test_and_set_bit(pin_index, &pio->pinmux_mask))) { + printk("%s: pin %u is busy\n", pio->name, pin_index); + goto fail; + } + + if (flags & AT32_GPIOF_OUTPUT) { + if (flags & AT32_GPIOF_HIGH) + pio_writel(pio, SODR, mask); + else + pio_writel(pio, CODR, mask); + if (flags & AT32_GPIOF_MULTIDRV) + pio_writel(pio, MDER, mask); + else + pio_writel(pio, MDDR, mask); + pio_writel(pio, PUDR, mask); + pio_writel(pio, OER, mask); + } else { + if (flags & AT32_GPIOF_PULLUP) + pio_writel(pio, PUER, mask); + else + pio_writel(pio, PUDR, mask); + if (flags & AT32_GPIOF_DEGLITCH) + pio_writel(pio, IFER, mask); + else + pio_writel(pio, IFDR, mask); + pio_writel(pio, ODR, mask); + } + + pio_writel(pio, PER, mask); + + return; + +fail: + dump_stack(); +} + +/* + * Undo a previous pin reservation. Will not affect the hardware + * configuration. + */ +void at32_deselect_pin(unsigned int pin) +{ + struct pio_device *pio; + unsigned int pin_index = pin & 0x1f; + + pio = gpio_to_pio(pin); + if (unlikely(!pio)) { + printk("pio: invalid pin %u\n", pin); + dump_stack(); + return; + } + + clear_bit(pin_index, &pio->pinmux_mask); +} + +/* Reserve a pin, preventing anyone else from changing its configuration. */ +void __init at32_reserve_pin(unsigned int port, u32 pin_mask) +{ + struct pio_device *pio; + + /* assign and verify pio */ + pio = gpio_to_pio(port); + if (unlikely(!pio)) { + printk(KERN_WARNING "pio: invalid port %u\n", port); + goto fail; + } + + /* Test if any of the requested pins is already muxed */ + spin_lock(&pio_lock); + if (unlikely(pio->pinmux_mask & pin_mask)) { + printk(KERN_WARNING "%s: pin(s) busy (req. 0x%x, busy 0x%x)\n", + pio->name, pin_mask, pio->pinmux_mask & pin_mask); + spin_unlock(&pio_lock); + goto fail; + } + + /* Reserve pins */ + pio->pinmux_mask |= pin_mask; + spin_unlock(&pio_lock); + return; + +fail: + dump_stack(); +} + +/*--------------------------------------------------------------------------*/ + +/* GPIO API */ + +static int direction_input(struct gpio_chip *chip, unsigned offset) +{ + struct pio_device *pio = container_of(chip, struct pio_device, chip); + u32 mask = 1 << offset; + + if (!(pio_readl(pio, PSR) & mask)) + return -EINVAL; + + pio_writel(pio, ODR, mask); + return 0; +} + +static int gpio_get(struct gpio_chip *chip, unsigned offset) +{ + struct pio_device *pio = container_of(chip, struct pio_device, chip); + + return (pio_readl(pio, PDSR) >> offset) & 1; +} + +static void gpio_set(struct gpio_chip *chip, unsigned offset, int value); + +static int direction_output(struct gpio_chip *chip, unsigned offset, int value) +{ + struct pio_device *pio = container_of(chip, struct pio_device, chip); + u32 mask = 1 << offset; + + if (!(pio_readl(pio, PSR) & mask)) + return -EINVAL; + + gpio_set(chip, offset, value); + pio_writel(pio, OER, mask); + return 0; +} + +static void gpio_set(struct gpio_chip *chip, unsigned offset, int value) +{ + struct pio_device *pio = container_of(chip, struct pio_device, chip); + u32 mask = 1 << offset; + + if (value) + pio_writel(pio, SODR, mask); + else + pio_writel(pio, CODR, mask); +} + +/*--------------------------------------------------------------------------*/ + +/* GPIO IRQ support */ + +static void gpio_irq_mask(struct irq_data *d) +{ + unsigned gpio = irq_to_gpio(d->irq); + struct pio_device *pio = &pio_dev[gpio >> 5]; + + pio_writel(pio, IDR, 1 << (gpio & 0x1f)); +} + +static void gpio_irq_unmask(struct irq_data *d) +{ + unsigned gpio = irq_to_gpio(d->irq); + struct pio_device *pio = &pio_dev[gpio >> 5]; + + pio_writel(pio, IER, 1 << (gpio & 0x1f)); +} + +static int gpio_irq_type(struct irq_data *d, unsigned type) +{ + if (type != IRQ_TYPE_EDGE_BOTH && type != IRQ_TYPE_NONE) + return -EINVAL; + + return 0; +} + +static struct irq_chip gpio_irqchip = { + .name = "gpio", + .irq_mask = gpio_irq_mask, + .irq_unmask = gpio_irq_unmask, + .irq_set_type = gpio_irq_type, +}; + +static void gpio_irq_handler(unsigned irq, struct irq_desc *desc) +{ + struct pio_device *pio = irq_desc_get_chip_data(desc); + unsigned gpio_irq; + + gpio_irq = (unsigned) irq_get_handler_data(irq); + for (;;) { + u32 isr; + + /* ack pending GPIO interrupts */ + isr = pio_readl(pio, ISR) & pio_readl(pio, IMR); + if (!isr) + break; + do { + int i; + + i = ffs(isr) - 1; + isr &= ~(1 << i); + + i += gpio_irq; + generic_handle_irq(i); + } while (isr); + } +} + +static void __init +gpio_irq_setup(struct pio_device *pio, int irq, int gpio_irq) +{ + unsigned i; + + irq_set_chip_data(irq, pio); + irq_set_handler_data(irq, (void *)gpio_irq); + + for (i = 0; i < 32; i++, gpio_irq++) { + irq_set_chip_data(gpio_irq, pio); + irq_set_chip_and_handler(gpio_irq, &gpio_irqchip, + handle_simple_irq); + } + + irq_set_chained_handler(irq, gpio_irq_handler); +} + +/*--------------------------------------------------------------------------*/ + +#ifdef CONFIG_DEBUG_FS + +#include <linux/seq_file.h> + +/* + * This shows more info than the generic gpio dump code: + * pullups, deglitching, open drain drive. + */ +static void pio_bank_show(struct seq_file *s, struct gpio_chip *chip) +{ + struct pio_device *pio = container_of(chip, struct pio_device, chip); + u32 psr, osr, imr, pdsr, pusr, ifsr, mdsr; + unsigned i; + u32 mask; + char bank; + + psr = pio_readl(pio, PSR); + osr = pio_readl(pio, OSR); + imr = pio_readl(pio, IMR); + pdsr = pio_readl(pio, PDSR); + pusr = pio_readl(pio, PUSR); + ifsr = pio_readl(pio, IFSR); + mdsr = pio_readl(pio, MDSR); + + bank = 'A' + pio->pdev->id; + + for (i = 0, mask = 1; i < 32; i++, mask <<= 1) { + const char *label; + + label = gpiochip_is_requested(chip, i); + if (!label && (imr & mask)) + label = "[irq]"; + if (!label) + continue; + + seq_printf(s, " gpio-%-3d P%c%-2d (%-12s) %s %s %s", + chip->base + i, bank, i, + label, + (osr & mask) ? "out" : "in ", + (mask & pdsr) ? "hi" : "lo", + (mask & pusr) ? " " : "up"); + if (ifsr & mask) + seq_printf(s, " deglitch"); + if ((osr & mdsr) & mask) + seq_printf(s, " open-drain"); + if (imr & mask) + seq_printf(s, " irq-%d edge-both", + gpio_to_irq(chip->base + i)); + seq_printf(s, "\n"); + } +} + +#else +#define pio_bank_show NULL +#endif + + +/*--------------------------------------------------------------------------*/ + +static int __init pio_probe(struct platform_device *pdev) +{ + struct pio_device *pio = NULL; + int irq = platform_get_irq(pdev, 0); + int gpio_irq_base = GPIO_IRQ_BASE + pdev->id * 32; + + BUG_ON(pdev->id >= MAX_NR_PIO_DEVICES); + pio = &pio_dev[pdev->id]; + BUG_ON(!pio->regs); + + pio->chip.label = pio->name; + pio->chip.base = pdev->id * 32; + pio->chip.ngpio = 32; + pio->chip.dev = &pdev->dev; + pio->chip.owner = THIS_MODULE; + + pio->chip.direction_input = direction_input; + pio->chip.get = gpio_get; + pio->chip.direction_output = direction_output; + pio->chip.set = gpio_set; + pio->chip.dbg_show = pio_bank_show; + + gpiochip_add(&pio->chip); + + gpio_irq_setup(pio, irq, gpio_irq_base); + + platform_set_drvdata(pdev, pio); + + printk(KERN_DEBUG "%s: base 0x%p, irq %d chains %d..%d\n", + pio->name, pio->regs, irq, gpio_irq_base, gpio_irq_base + 31); + + return 0; +} + +static struct platform_driver pio_driver = { + .driver = { + .name = "pio", + }, +}; + +static int __init pio_init(void) +{ + return platform_driver_probe(&pio_driver, pio_probe); +} +postcore_initcall(pio_init); + +void __init at32_init_pio(struct platform_device *pdev) +{ + struct resource *regs; + struct pio_device *pio; + + if (pdev->id > MAX_NR_PIO_DEVICES) { + dev_err(&pdev->dev, "only %d PIO devices supported\n", + MAX_NR_PIO_DEVICES); + return; + } + + pio = &pio_dev[pdev->id]; + snprintf(pio->name, sizeof(pio->name), "pio%d", pdev->id); + + regs = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!regs) { + dev_err(&pdev->dev, "no mmio resource defined\n"); + return; + } + + pio->clk = clk_get(&pdev->dev, "mck"); + if (IS_ERR(pio->clk)) + /* + * This is a fatal error, but if we continue we might + * be so lucky that we manage to initialize the + * console and display this message... + */ + dev_err(&pdev->dev, "no mck clock defined\n"); + else + clk_enable(pio->clk); + + pio->pdev = pdev; + pio->regs = ioremap(regs->start, resource_size(regs)); + + /* start with irqs disabled and acked */ + pio_writel(pio, IDR, ~0UL); + (void) pio_readl(pio, ISR); +} diff --git a/arch/avr32/mach-at32ap/pio.h b/arch/avr32/mach-at32ap/pio.h new file mode 100644 index 000000000..9484dfcc0 --- /dev/null +++ b/arch/avr32/mach-at32ap/pio.h @@ -0,0 +1,180 @@ +/* + * Atmel PIO2 Port Multiplexer support + * + * Copyright (C) 2004-2006 Atmel Corporation + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#ifndef __ARCH_AVR32_AT32AP_PIO_H__ +#define __ARCH_AVR32_AT32AP_PIO_H__ + +/* PIO register offsets */ +#define PIO_PER 0x0000 +#define PIO_PDR 0x0004 +#define PIO_PSR 0x0008 +#define PIO_OER 0x0010 +#define PIO_ODR 0x0014 +#define PIO_OSR 0x0018 +#define PIO_IFER 0x0020 +#define PIO_IFDR 0x0024 +#define PIO_IFSR 0x0028 +#define PIO_SODR 0x0030 +#define PIO_CODR 0x0034 +#define PIO_ODSR 0x0038 +#define PIO_PDSR 0x003c +#define PIO_IER 0x0040 +#define PIO_IDR 0x0044 +#define PIO_IMR 0x0048 +#define PIO_ISR 0x004c +#define PIO_MDER 0x0050 +#define PIO_MDDR 0x0054 +#define PIO_MDSR 0x0058 +#define PIO_PUDR 0x0060 +#define PIO_PUER 0x0064 +#define PIO_PUSR 0x0068 +#define PIO_ASR 0x0070 +#define PIO_BSR 0x0074 +#define PIO_ABSR 0x0078 +#define PIO_OWER 0x00a0 +#define PIO_OWDR 0x00a4 +#define PIO_OWSR 0x00a8 + +/* Bitfields in PER */ + +/* Bitfields in PDR */ + +/* Bitfields in PSR */ + +/* Bitfields in OER */ + +/* Bitfields in ODR */ + +/* Bitfields in OSR */ + +/* Bitfields in IFER */ + +/* Bitfields in IFDR */ + +/* Bitfields in IFSR */ + +/* Bitfields in SODR */ + +/* Bitfields in CODR */ + +/* Bitfields in ODSR */ + +/* Bitfields in PDSR */ + +/* Bitfields in IER */ + +/* Bitfields in IDR */ + +/* Bitfields in IMR */ + +/* Bitfields in ISR */ + +/* Bitfields in MDER */ + +/* Bitfields in MDDR */ + +/* Bitfields in MDSR */ + +/* Bitfields in PUDR */ + +/* Bitfields in PUER */ + +/* Bitfields in PUSR */ + +/* Bitfields in ASR */ + +/* Bitfields in BSR */ + +/* Bitfields in ABSR */ +#define PIO_P0_OFFSET 0 +#define PIO_P0_SIZE 1 +#define PIO_P1_OFFSET 1 +#define PIO_P1_SIZE 1 +#define PIO_P2_OFFSET 2 +#define PIO_P2_SIZE 1 +#define PIO_P3_OFFSET 3 +#define PIO_P3_SIZE 1 +#define PIO_P4_OFFSET 4 +#define PIO_P4_SIZE 1 +#define PIO_P5_OFFSET 5 +#define PIO_P5_SIZE 1 +#define PIO_P6_OFFSET 6 +#define PIO_P6_SIZE 1 +#define PIO_P7_OFFSET 7 +#define PIO_P7_SIZE 1 +#define PIO_P8_OFFSET 8 +#define PIO_P8_SIZE 1 +#define PIO_P9_OFFSET 9 +#define PIO_P9_SIZE 1 +#define PIO_P10_OFFSET 10 +#define PIO_P10_SIZE 1 +#define PIO_P11_OFFSET 11 +#define PIO_P11_SIZE 1 +#define PIO_P12_OFFSET 12 +#define PIO_P12_SIZE 1 +#define PIO_P13_OFFSET 13 +#define PIO_P13_SIZE 1 +#define PIO_P14_OFFSET 14 +#define PIO_P14_SIZE 1 +#define PIO_P15_OFFSET 15 +#define PIO_P15_SIZE 1 +#define PIO_P16_OFFSET 16 +#define PIO_P16_SIZE 1 +#define PIO_P17_OFFSET 17 +#define PIO_P17_SIZE 1 +#define PIO_P18_OFFSET 18 +#define PIO_P18_SIZE 1 +#define PIO_P19_OFFSET 19 +#define PIO_P19_SIZE 1 +#define PIO_P20_OFFSET 20 +#define PIO_P20_SIZE 1 +#define PIO_P21_OFFSET 21 +#define PIO_P21_SIZE 1 +#define PIO_P22_OFFSET 22 +#define PIO_P22_SIZE 1 +#define PIO_P23_OFFSET 23 +#define PIO_P23_SIZE 1 +#define PIO_P24_OFFSET 24 +#define PIO_P24_SIZE 1 +#define PIO_P25_OFFSET 25 +#define PIO_P25_SIZE 1 +#define PIO_P26_OFFSET 26 +#define PIO_P26_SIZE 1 +#define PIO_P27_OFFSET 27 +#define PIO_P27_SIZE 1 +#define PIO_P28_OFFSET 28 +#define PIO_P28_SIZE 1 +#define PIO_P29_OFFSET 29 +#define PIO_P29_SIZE 1 +#define PIO_P30_OFFSET 30 +#define PIO_P30_SIZE 1 +#define PIO_P31_OFFSET 31 +#define PIO_P31_SIZE 1 + +/* Bitfields in OWER */ + +/* Bitfields in OWDR */ + +/* Bitfields in OWSR */ + +/* Bit manipulation macros */ +#define PIO_BIT(name) (1 << PIO_##name##_OFFSET) +#define PIO_BF(name,value) (((value) & ((1 << PIO_##name##_SIZE) - 1)) << PIO_##name##_OFFSET) +#define PIO_BFEXT(name,value) (((value) >> PIO_##name##_OFFSET) & ((1 << PIO_##name##_SIZE) - 1)) +#define PIO_BFINS(name,value,old) (((old) & ~(((1 << PIO_##name##_SIZE) - 1) << PIO_##name##_OFFSET)) | PIO_BF(name,value)) + +/* Register access macros */ +#define pio_readl(port,reg) \ + __raw_readl((port)->regs + PIO_##reg) +#define pio_writel(port,reg,value) \ + __raw_writel((value), (port)->regs + PIO_##reg) + +void at32_init_pio(struct platform_device *pdev); + +#endif /* __ARCH_AVR32_AT32AP_PIO_H__ */ diff --git a/arch/avr32/mach-at32ap/pm-at32ap700x.S b/arch/avr32/mach-at32ap/pm-at32ap700x.S new file mode 100644 index 000000000..1c8e4e6bf --- /dev/null +++ b/arch/avr32/mach-at32ap/pm-at32ap700x.S @@ -0,0 +1,167 @@ +/* + * Low-level Power Management code. + * + * Copyright (C) 2008 Atmel Corporation + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#include <asm/asm.h> +#include <asm/asm-offsets.h> +#include <asm/thread_info.h> +#include <mach/pm.h> + +#include "pm.h" +#include "sdramc.h" + +/* Same as 0xfff00000 but fits in a 21 bit signed immediate */ +#define PM_BASE -0x100000 + + /* Keep this close to the irq handlers */ + .section .irq.text, "ax", @progbits + + /* + * void cpu_enter_idle(void) + * + * Put the CPU into "idle" mode, in which it will consume + * significantly less power. + * + * If an interrupt comes along in the window between + * unmask_interrupts and the sleep instruction below, the + * interrupt code will adjust the return address so that we + * never execute the sleep instruction. This is required + * because the AP7000 doesn't unmask interrupts when entering + * sleep modes; later CPUs may not need this workaround. + */ + .global cpu_enter_idle + .type cpu_enter_idle, @function +cpu_enter_idle: + mask_interrupts + get_thread_info r8 + ld.w r9, r8[TI_flags] + bld r9, TIF_NEED_RESCHED + brcs .Lret_from_sleep + sbr r9, TIF_CPU_GOING_TO_SLEEP + st.w r8[TI_flags], r9 + unmask_interrupts + sleep CPU_SLEEP_IDLE + .size cpu_enter_idle, . - cpu_enter_idle + + /* + * Common return path for PM functions that don't run from + * SRAM. + */ + .global cpu_idle_skip_sleep + .type cpu_idle_skip_sleep, @function +cpu_idle_skip_sleep: + mask_interrupts + ld.w r9, r8[TI_flags] + cbr r9, TIF_CPU_GOING_TO_SLEEP + st.w r8[TI_flags], r9 +.Lret_from_sleep: + unmask_interrupts + retal r12 + .size cpu_idle_skip_sleep, . - cpu_idle_skip_sleep + +#ifdef CONFIG_PM + .section .init.text, "ax", @progbits + + .global pm_exception + .type pm_exception, @function +pm_exception: + /* + * Exceptions are masked when we switch to this handler, so + * we'll only get "unrecoverable" exceptions (offset 0.) + */ + sub r12, pc, . - .Lpanic_msg + lddpc pc, .Lpanic_addr + + .align 2 +.Lpanic_addr: + .long panic +.Lpanic_msg: + .asciz "Unrecoverable exception during suspend\n" + .size pm_exception, . - pm_exception + + .global pm_irq0 + .type pm_irq0, @function +pm_irq0: + /* Disable interrupts and return after the sleep instruction */ + mfsr r9, SYSREG_RSR_INT0 + mtsr SYSREG_RAR_INT0, r8 + sbr r9, SYSREG_GM_OFFSET + mtsr SYSREG_RSR_INT0, r9 + rete + + /* + * void cpu_enter_standby(unsigned long sdramc_base) + * + * Enter PM_SUSPEND_STANDBY mode. At this point, all drivers + * are suspended and interrupts are disabled. Interrupts + * marked as 'wakeup' event sources may still come along and + * get us out of here. + * + * The SDRAM will be put into self-refresh mode (which does + * not require a clock from the CPU), and the CPU will be put + * into "frozen" mode (HSB bus stopped). The SDRAM controller + * will automatically bring the SDRAM into normal mode on the + * first access, and the power manager will automatically + * start the HSB and CPU clocks upon a wakeup event. + * + * This code uses the same "skip sleep" technique as above. + * It is very important that we jump directly to + * cpu_after_sleep after the sleep instruction since that's + * where we'll end up if the interrupt handler decides that we + * need to skip the sleep instruction. + */ + .global pm_standby + .type pm_standby, @function +pm_standby: + /* + * interrupts are already masked at this point, and EVBA + * points to pm_exception above. + */ + ld.w r10, r12[SDRAMC_LPR] + sub r8, pc, . - 1f /* return address for irq handler */ + mov r11, SDRAMC_LPR_LPCB_SELF_RFR + bfins r10, r11, 0, 2 /* LPCB <- self Refresh */ + sync 0 /* flush write buffer */ + st.w r12[SDRAMC_LPR], r10 /* put SDRAM in self-refresh mode */ + ld.w r11, r12[SDRAMC_LPR] + unmask_interrupts + sleep CPU_SLEEP_FROZEN +1: mask_interrupts + retal r12 + .size pm_standby, . - pm_standby + + .global pm_suspend_to_ram + .type pm_suspend_to_ram, @function +pm_suspend_to_ram: + /* + * interrupts are already masked at this point, and EVBA + * points to pm_exception above. + */ + mov r11, 0 + cache r11[2], 8 /* clean all dcache lines */ + sync 0 /* flush write buffer */ + ld.w r10, r12[SDRAMC_LPR] + sub r8, pc, . - 1f /* return address for irq handler */ + mov r11, SDRAMC_LPR_LPCB_SELF_RFR + bfins r10, r11, 0, 2 /* LPCB <- self refresh */ + st.w r12[SDRAMC_LPR], r10 /* put SDRAM in self-refresh mode */ + ld.w r11, r12[SDRAMC_LPR] + + unmask_interrupts + sleep CPU_SLEEP_STOP +1: mask_interrupts + + retal r12 + .size pm_suspend_to_ram, . - pm_suspend_to_ram + + .global pm_sram_end + .type pm_sram_end, @function +pm_sram_end: + .size pm_sram_end, 0 + +#endif /* CONFIG_PM */ diff --git a/arch/avr32/mach-at32ap/pm.c b/arch/avr32/mach-at32ap/pm.c new file mode 100644 index 000000000..db190842b --- /dev/null +++ b/arch/avr32/mach-at32ap/pm.c @@ -0,0 +1,243 @@ +/* + * AVR32 AP Power Management + * + * Copyright (C) 2008 Atmel Corporation + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + */ +#include <linux/io.h> +#include <linux/suspend.h> +#include <linux/vmalloc.h> + +#include <asm/cacheflush.h> +#include <asm/sysreg.h> + +#include <mach/chip.h> +#include <mach/pm.h> +#include <mach/sram.h> + +#include "sdramc.h" + +#define SRAM_PAGE_FLAGS (SYSREG_BIT(TLBELO_D) | SYSREG_BF(SZ, 1) \ + | SYSREG_BF(AP, 3) | SYSREG_BIT(G)) + + +static unsigned long pm_sram_start; +static size_t pm_sram_size; +static struct vm_struct *pm_sram_area; + +static void (*avr32_pm_enter_standby)(unsigned long sdramc_base); +static void (*avr32_pm_enter_str)(unsigned long sdramc_base); + +/* + * Must be called with interrupts disabled. Exceptions will be masked + * on return (i.e. all exceptions will be "unrecoverable".) + */ +static void *avr32_pm_map_sram(void) +{ + unsigned long vaddr; + unsigned long page_addr; + u32 tlbehi; + u32 mmucr; + + vaddr = (unsigned long)pm_sram_area->addr; + page_addr = pm_sram_start & PAGE_MASK; + + /* + * Mask exceptions and grab the first TLB entry. We won't be + * needing it while sleeping. + */ + asm volatile("ssrf %0" : : "i"(SYSREG_EM_OFFSET) : "memory"); + + mmucr = sysreg_read(MMUCR); + tlbehi = sysreg_read(TLBEHI); + sysreg_write(MMUCR, SYSREG_BFINS(DRP, 0, mmucr)); + + tlbehi = SYSREG_BF(ASID, SYSREG_BFEXT(ASID, tlbehi)); + tlbehi |= vaddr & PAGE_MASK; + tlbehi |= SYSREG_BIT(TLBEHI_V); + + sysreg_write(TLBELO, page_addr | SRAM_PAGE_FLAGS); + sysreg_write(TLBEHI, tlbehi); + __builtin_tlbw(); + + return (void *)(vaddr + pm_sram_start - page_addr); +} + +/* + * Must be called with interrupts disabled. Exceptions will be + * unmasked on return. + */ +static void avr32_pm_unmap_sram(void) +{ + u32 mmucr; + u32 tlbehi; + u32 tlbarlo; + + /* Going to update TLB entry at index 0 */ + mmucr = sysreg_read(MMUCR); + tlbehi = sysreg_read(TLBEHI); + sysreg_write(MMUCR, SYSREG_BFINS(DRP, 0, mmucr)); + + /* Clear the "valid" bit */ + tlbehi = SYSREG_BF(ASID, SYSREG_BFEXT(ASID, tlbehi)); + sysreg_write(TLBEHI, tlbehi); + + /* Mark it as "not accessed" */ + tlbarlo = sysreg_read(TLBARLO); + sysreg_write(TLBARLO, tlbarlo | 0x80000000U); + + /* Update the TLB */ + __builtin_tlbw(); + + /* Unmask exceptions */ + asm volatile("csrf %0" : : "i"(SYSREG_EM_OFFSET) : "memory"); +} + +static int avr32_pm_valid_state(suspend_state_t state) +{ + switch (state) { + case PM_SUSPEND_ON: + case PM_SUSPEND_STANDBY: + case PM_SUSPEND_MEM: + return 1; + + default: + return 0; + } +} + +static int avr32_pm_enter(suspend_state_t state) +{ + u32 lpr_saved; + u32 evba_saved; + void *sram; + + switch (state) { + case PM_SUSPEND_STANDBY: + sram = avr32_pm_map_sram(); + + /* Switch to in-sram exception handlers */ + evba_saved = sysreg_read(EVBA); + sysreg_write(EVBA, (unsigned long)sram); + + /* + * Save the LPR register so that we can re-enable + * SDRAM Low Power mode on resume. + */ + lpr_saved = sdramc_readl(LPR); + pr_debug("%s: Entering standby...\n", __func__); + avr32_pm_enter_standby(SDRAMC_BASE); + sdramc_writel(LPR, lpr_saved); + + /* Switch back to regular exception handlers */ + sysreg_write(EVBA, evba_saved); + + avr32_pm_unmap_sram(); + break; + + case PM_SUSPEND_MEM: + sram = avr32_pm_map_sram(); + + /* Switch to in-sram exception handlers */ + evba_saved = sysreg_read(EVBA); + sysreg_write(EVBA, (unsigned long)sram); + + /* + * Save the LPR register so that we can re-enable + * SDRAM Low Power mode on resume. + */ + lpr_saved = sdramc_readl(LPR); + pr_debug("%s: Entering suspend-to-ram...\n", __func__); + avr32_pm_enter_str(SDRAMC_BASE); + sdramc_writel(LPR, lpr_saved); + + /* Switch back to regular exception handlers */ + sysreg_write(EVBA, evba_saved); + + avr32_pm_unmap_sram(); + break; + + case PM_SUSPEND_ON: + pr_debug("%s: Entering idle...\n", __func__); + cpu_enter_idle(); + break; + + default: + pr_debug("%s: Invalid suspend state %d\n", __func__, state); + goto out; + } + + pr_debug("%s: wakeup\n", __func__); + +out: + return 0; +} + +static const struct platform_suspend_ops avr32_pm_ops = { + .valid = avr32_pm_valid_state, + .enter = avr32_pm_enter, +}; + +static unsigned long __init avr32_pm_offset(void *symbol) +{ + extern u8 pm_exception[]; + + return (unsigned long)symbol - (unsigned long)pm_exception; +} + +static int __init avr32_pm_init(void) +{ + extern u8 pm_exception[]; + extern u8 pm_irq0[]; + extern u8 pm_standby[]; + extern u8 pm_suspend_to_ram[]; + extern u8 pm_sram_end[]; + void *dst; + + /* + * To keep things simple, we depend on not needing more than a + * single page. + */ + pm_sram_size = avr32_pm_offset(pm_sram_end); + if (pm_sram_size > PAGE_SIZE) + goto err; + + pm_sram_start = sram_alloc(pm_sram_size); + if (!pm_sram_start) + goto err_alloc_sram; + + /* Grab a virtual area we can use later on. */ + pm_sram_area = get_vm_area(pm_sram_size, VM_IOREMAP); + if (!pm_sram_area) + goto err_vm_area; + pm_sram_area->phys_addr = pm_sram_start; + + local_irq_disable(); + dst = avr32_pm_map_sram(); + memcpy(dst, pm_exception, pm_sram_size); + flush_dcache_region(dst, pm_sram_size); + invalidate_icache_region(dst, pm_sram_size); + avr32_pm_unmap_sram(); + local_irq_enable(); + + avr32_pm_enter_standby = dst + avr32_pm_offset(pm_standby); + avr32_pm_enter_str = dst + avr32_pm_offset(pm_suspend_to_ram); + intc_set_suspend_handler(avr32_pm_offset(pm_irq0)); + + suspend_set_ops(&avr32_pm_ops); + + printk("AVR32 AP Power Management enabled\n"); + + return 0; + +err_vm_area: + sram_free(pm_sram_start, pm_sram_size); +err_alloc_sram: +err: + pr_err("AVR32 Power Management initialization failed\n"); + return -ENOMEM; +} +arch_initcall(avr32_pm_init); diff --git a/arch/avr32/mach-at32ap/pm.h b/arch/avr32/mach-at32ap/pm.h new file mode 100644 index 000000000..532a3732c --- /dev/null +++ b/arch/avr32/mach-at32ap/pm.h @@ -0,0 +1,112 @@ +/* + * Register definitions for the Power Manager (PM) + */ +#ifndef __ARCH_AVR32_MACH_AT32AP_PM_H__ +#define __ARCH_AVR32_MACH_AT32AP_PM_H__ + +/* PM register offsets */ +#define PM_MCCTRL 0x0000 +#define PM_CKSEL 0x0004 +#define PM_CPU_MASK 0x0008 +#define PM_HSB_MASK 0x000c +#define PM_PBA_MASK 0x0010 +#define PM_PBB_MASK 0x0014 +#define PM_PLL0 0x0020 +#define PM_PLL1 0x0024 +#define PM_IER 0x0040 +#define PM_IDR 0x0044 +#define PM_IMR 0x0048 +#define PM_ISR 0x004c +#define PM_ICR 0x0050 +#define PM_GCCTRL(x) (0x0060 + 4 * (x)) +#define PM_RCAUSE 0x00c0 + +/* Bitfields in CKSEL */ +#define PM_CPUSEL_OFFSET 0 +#define PM_CPUSEL_SIZE 3 +#define PM_CPUDIV_OFFSET 7 +#define PM_CPUDIV_SIZE 1 +#define PM_HSBSEL_OFFSET 8 +#define PM_HSBSEL_SIZE 3 +#define PM_HSBDIV_OFFSET 15 +#define PM_HSBDIV_SIZE 1 +#define PM_PBASEL_OFFSET 16 +#define PM_PBASEL_SIZE 3 +#define PM_PBADIV_OFFSET 23 +#define PM_PBADIV_SIZE 1 +#define PM_PBBSEL_OFFSET 24 +#define PM_PBBSEL_SIZE 3 +#define PM_PBBDIV_OFFSET 31 +#define PM_PBBDIV_SIZE 1 + +/* Bitfields in PLL0 */ +#define PM_PLLEN_OFFSET 0 +#define PM_PLLEN_SIZE 1 +#define PM_PLLOSC_OFFSET 1 +#define PM_PLLOSC_SIZE 1 +#define PM_PLLOPT_OFFSET 2 +#define PM_PLLOPT_SIZE 3 +#define PM_PLLDIV_OFFSET 8 +#define PM_PLLDIV_SIZE 8 +#define PM_PLLMUL_OFFSET 16 +#define PM_PLLMUL_SIZE 8 +#define PM_PLLCOUNT_OFFSET 24 +#define PM_PLLCOUNT_SIZE 6 +#define PM_PLLTEST_OFFSET 31 +#define PM_PLLTEST_SIZE 1 + +/* Bitfields in ICR */ +#define PM_LOCK0_OFFSET 0 +#define PM_LOCK0_SIZE 1 +#define PM_LOCK1_OFFSET 1 +#define PM_LOCK1_SIZE 1 +#define PM_WAKE_OFFSET 2 +#define PM_WAKE_SIZE 1 +#define PM_CKRDY_OFFSET 5 +#define PM_CKRDY_SIZE 1 +#define PM_MSKRDY_OFFSET 6 +#define PM_MSKRDY_SIZE 1 + +/* Bitfields in GCCTRL0 */ +#define PM_OSCSEL_OFFSET 0 +#define PM_OSCSEL_SIZE 1 +#define PM_PLLSEL_OFFSET 1 +#define PM_PLLSEL_SIZE 1 +#define PM_CEN_OFFSET 2 +#define PM_CEN_SIZE 1 +#define PM_DIVEN_OFFSET 4 +#define PM_DIVEN_SIZE 1 +#define PM_DIV_OFFSET 8 +#define PM_DIV_SIZE 8 + +/* Bitfields in RCAUSE */ +#define PM_POR_OFFSET 0 +#define PM_POR_SIZE 1 +#define PM_EXT_OFFSET 2 +#define PM_EXT_SIZE 1 +#define PM_WDT_OFFSET 3 +#define PM_WDT_SIZE 1 +#define PM_NTAE_OFFSET 4 +#define PM_NTAE_SIZE 1 + +/* Bit manipulation macros */ +#define PM_BIT(name) \ + (1 << PM_##name##_OFFSET) +#define PM_BF(name,value) \ + (((value) & ((1 << PM_##name##_SIZE) - 1)) \ + << PM_##name##_OFFSET) +#define PM_BFEXT(name,value) \ + (((value) >> PM_##name##_OFFSET) \ + & ((1 << PM_##name##_SIZE) - 1)) +#define PM_BFINS(name,value,old)\ + (((old) & ~(((1 << PM_##name##_SIZE) - 1) \ + << PM_##name##_OFFSET)) \ + | PM_BF(name,value)) + +/* Register access macros */ +#define pm_readl(reg) \ + __raw_readl((void __iomem __force *)PM_BASE + PM_##reg) +#define pm_writel(reg,value) \ + __raw_writel((value), (void __iomem __force *)PM_BASE + PM_##reg) + +#endif /* __ARCH_AVR32_MACH_AT32AP_PM_H__ */ diff --git a/arch/avr32/mach-at32ap/sdramc.h b/arch/avr32/mach-at32ap/sdramc.h new file mode 100644 index 000000000..66eeaed49 --- /dev/null +++ b/arch/avr32/mach-at32ap/sdramc.h @@ -0,0 +1,76 @@ +/* + * Register definitions for the AT32AP SDRAM Controller + * + * Copyright (C) 2008 Atmel Corporation + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + */ + +/* Register offsets */ +#define SDRAMC_MR 0x0000 +#define SDRAMC_TR 0x0004 +#define SDRAMC_CR 0x0008 +#define SDRAMC_HSR 0x000c +#define SDRAMC_LPR 0x0010 +#define SDRAMC_IER 0x0014 +#define SDRAMC_IDR 0x0018 +#define SDRAMC_IMR 0x001c +#define SDRAMC_ISR 0x0020 +#define SDRAMC_MDR 0x0024 + +/* MR - Mode Register */ +#define SDRAMC_MR_MODE_NORMAL ( 0 << 0) +#define SDRAMC_MR_MODE_NOP ( 1 << 0) +#define SDRAMC_MR_MODE_BANKS_PRECHARGE ( 2 << 0) +#define SDRAMC_MR_MODE_LOAD_MODE ( 3 << 0) +#define SDRAMC_MR_MODE_AUTO_REFRESH ( 4 << 0) +#define SDRAMC_MR_MODE_EXT_LOAD_MODE ( 5 << 0) +#define SDRAMC_MR_MODE_POWER_DOWN ( 6 << 0) + +/* CR - Configuration Register */ +#define SDRAMC_CR_NC_8_BITS ( 0 << 0) +#define SDRAMC_CR_NC_9_BITS ( 1 << 0) +#define SDRAMC_CR_NC_10_BITS ( 2 << 0) +#define SDRAMC_CR_NC_11_BITS ( 3 << 0) +#define SDRAMC_CR_NR_11_BITS ( 0 << 2) +#define SDRAMC_CR_NR_12_BITS ( 1 << 2) +#define SDRAMC_CR_NR_13_BITS ( 2 << 2) +#define SDRAMC_CR_NB_2_BANKS ( 0 << 4) +#define SDRAMC_CR_NB_4_BANKS ( 1 << 4) +#define SDRAMC_CR_CAS(x) ((x) << 5) +#define SDRAMC_CR_DBW_32_BITS ( 0 << 7) +#define SDRAMC_CR_DBW_16_BITS ( 1 << 7) +#define SDRAMC_CR_TWR(x) ((x) << 8) +#define SDRAMC_CR_TRC(x) ((x) << 12) +#define SDRAMC_CR_TRP(x) ((x) << 16) +#define SDRAMC_CR_TRCD(x) ((x) << 20) +#define SDRAMC_CR_TRAS(x) ((x) << 24) +#define SDRAMC_CR_TXSR(x) ((x) << 28) + +/* HSR - High Speed Register */ +#define SDRAMC_HSR_DA ( 1 << 0) + +/* LPR - Low Power Register */ +#define SDRAMC_LPR_LPCB_INHIBIT ( 0 << 0) +#define SDRAMC_LPR_LPCB_SELF_RFR ( 1 << 0) +#define SDRAMC_LPR_LPCB_PDOWN ( 2 << 0) +#define SDRAMC_LPR_LPCB_DEEP_PDOWN ( 3 << 0) +#define SDRAMC_LPR_PASR(x) ((x) << 4) +#define SDRAMC_LPR_TCSR(x) ((x) << 8) +#define SDRAMC_LPR_DS(x) ((x) << 10) +#define SDRAMC_LPR_TIMEOUT(x) ((x) << 12) + +/* IER/IDR/IMR/ISR - Interrupt Enable/Disable/Mask/Status Register */ +#define SDRAMC_ISR_RES ( 1 << 0) + +/* MDR - Memory Device Register */ +#define SDRAMC_MDR_MD_SDRAM ( 0 << 0) +#define SDRAMC_MDR_MD_LOW_PWR_SDRAM ( 1 << 0) + +/* Register access macros */ +#define sdramc_readl(reg) \ + __raw_readl((void __iomem __force *)SDRAMC_BASE + SDRAMC_##reg) +#define sdramc_writel(reg, value) \ + __raw_writel(value, (void __iomem __force *)SDRAMC_BASE + SDRAMC_##reg) |