diff options
Diffstat (limited to 'arch/blackfin/kernel/trace.c')
-rw-r--r-- | arch/blackfin/kernel/trace.c | 986 |
1 files changed, 986 insertions, 0 deletions
diff --git a/arch/blackfin/kernel/trace.c b/arch/blackfin/kernel/trace.c new file mode 100644 index 000000000..c36efa0c7 --- /dev/null +++ b/arch/blackfin/kernel/trace.c @@ -0,0 +1,986 @@ +/* provide some functions which dump the trace buffer, in a nice way for people + * to read it, and understand what is going on + * + * Copyright 2004-2010 Analog Devices Inc. + * + * Licensed under the GPL-2 or later + */ + +#include <linux/kernel.h> +#include <linux/hardirq.h> +#include <linux/thread_info.h> +#include <linux/mm.h> +#include <linux/oom.h> +#include <linux/sched.h> +#include <linux/uaccess.h> +#include <linux/module.h> +#include <linux/kallsyms.h> +#include <linux/err.h> +#include <linux/fs.h> +#include <linux/irq.h> +#include <asm/dma.h> +#include <asm/trace.h> +#include <asm/fixed_code.h> +#include <asm/traps.h> +#include <asm/irq_handler.h> +#include <asm/pda.h> + +void decode_address(char *buf, unsigned long address) +{ + struct task_struct *p; + struct mm_struct *mm; + unsigned long offset; + struct rb_node *n; + +#ifdef CONFIG_KALLSYMS + unsigned long symsize; + const char *symname; + char *modname; + char *delim = ":"; + char namebuf[128]; +#endif + + buf += sprintf(buf, "<0x%08lx> ", address); + +#ifdef CONFIG_KALLSYMS + /* look up the address and see if we are in kernel space */ + symname = kallsyms_lookup(address, &symsize, &offset, &modname, namebuf); + + if (symname) { + /* yeah! kernel space! */ + if (!modname) + modname = delim = ""; + sprintf(buf, "{ %s%s%s%s + 0x%lx }", + delim, modname, delim, symname, + (unsigned long)offset); + return; + } +#endif + + if (address >= FIXED_CODE_START && address < FIXED_CODE_END) { + /* Problem in fixed code section? */ + strcat(buf, "/* Maybe fixed code section */"); + return; + + } else if (address < CONFIG_BOOT_LOAD) { + /* Problem somewhere before the kernel start address */ + strcat(buf, "/* Maybe null pointer? */"); + return; + + } else if (address >= COREMMR_BASE) { + strcat(buf, "/* core mmrs */"); + return; + + } else if (address >= SYSMMR_BASE) { + strcat(buf, "/* system mmrs */"); + return; + + } else if (address >= L1_ROM_START && address < L1_ROM_START + L1_ROM_LENGTH) { + strcat(buf, "/* on-chip L1 ROM */"); + return; + + } else if (address >= L1_SCRATCH_START && address < L1_SCRATCH_START + L1_SCRATCH_LENGTH) { + strcat(buf, "/* on-chip scratchpad */"); + return; + + } else if (address >= physical_mem_end && address < ASYNC_BANK0_BASE) { + strcat(buf, "/* unconnected memory */"); + return; + + } else if (address >= ASYNC_BANK3_BASE + ASYNC_BANK3_SIZE && address < BOOT_ROM_START) { + strcat(buf, "/* reserved memory */"); + return; + + } else if (address >= L1_DATA_A_START && address < L1_DATA_A_START + L1_DATA_A_LENGTH) { + strcat(buf, "/* on-chip Data Bank A */"); + return; + + } else if (address >= L1_DATA_B_START && address < L1_DATA_B_START + L1_DATA_B_LENGTH) { + strcat(buf, "/* on-chip Data Bank B */"); + return; + } + + /* + * Don't walk any of the vmas if we are oopsing, it has been known + * to cause problems - corrupt vmas (kernel crashes) cause double faults + */ + if (oops_in_progress) { + strcat(buf, "/* kernel dynamic memory (maybe user-space) */"); + return; + } + + /* looks like we're off in user-land, so let's walk all the + * mappings of all our processes and see if we can't be a whee + * bit more specific + */ + read_lock(&tasklist_lock); + for_each_process(p) { + struct task_struct *t; + + t = find_lock_task_mm(p); + if (!t) + continue; + + mm = t->mm; + if (!down_read_trylock(&mm->mmap_sem)) + goto __continue; + + for (n = rb_first(&mm->mm_rb); n; n = rb_next(n)) { + struct vm_area_struct *vma; + + vma = rb_entry(n, struct vm_area_struct, vm_rb); + + if (address >= vma->vm_start && address < vma->vm_end) { + char _tmpbuf[256]; + char *name = t->comm; + struct file *file = vma->vm_file; + + if (file) { + char *d_name = d_path(&file->f_path, _tmpbuf, + sizeof(_tmpbuf)); + if (!IS_ERR(d_name)) + name = d_name; + } + + /* FLAT does not have its text aligned to the start of + * the map while FDPIC ELF does ... + */ + + /* before we can check flat/fdpic, we need to + * make sure current is valid + */ + if ((unsigned long)current >= FIXED_CODE_START && + !((unsigned long)current & 0x3)) { + if (current->mm && + (address > current->mm->start_code) && + (address < current->mm->end_code)) + offset = address - current->mm->start_code; + else + offset = (address - vma->vm_start) + + (vma->vm_pgoff << PAGE_SHIFT); + + sprintf(buf, "[ %s + 0x%lx ]", name, offset); + } else + sprintf(buf, "[ %s vma:0x%lx-0x%lx]", + name, vma->vm_start, vma->vm_end); + + up_read(&mm->mmap_sem); + task_unlock(t); + + if (buf[0] == '\0') + sprintf(buf, "[ %s ] dynamic memory", name); + + goto done; + } + } + + up_read(&mm->mmap_sem); +__continue: + task_unlock(t); + } + + /* + * we were unable to find this address anywhere, + * or some MMs were skipped because they were in use. + */ + sprintf(buf, "/* kernel dynamic memory */"); + +done: + read_unlock(&tasklist_lock); +} + +#define EXPAND_LEN ((1 << CONFIG_DEBUG_BFIN_HWTRACE_EXPAND_LEN) * 256 - 1) + +/* + * Similar to get_user, do some address checking, then dereference + * Return true on success, false on bad address + */ +bool get_mem16(unsigned short *val, unsigned short *address) +{ + unsigned long addr = (unsigned long)address; + + /* Check for odd addresses */ + if (addr & 0x1) + return false; + + switch (bfin_mem_access_type(addr, 2)) { + case BFIN_MEM_ACCESS_CORE: + case BFIN_MEM_ACCESS_CORE_ONLY: + *val = *address; + return true; + case BFIN_MEM_ACCESS_DMA: + dma_memcpy(val, address, 2); + return true; + case BFIN_MEM_ACCESS_ITEST: + isram_memcpy(val, address, 2); + return true; + default: /* invalid access */ + return false; + } +} + +bool get_instruction(unsigned int *val, unsigned short *address) +{ + unsigned long addr = (unsigned long)address; + unsigned short opcode0, opcode1; + + /* Check for odd addresses */ + if (addr & 0x1) + return false; + + /* MMR region will never have instructions */ + if (addr >= SYSMMR_BASE) + return false; + + /* Scratchpad will never have instructions */ + if (addr >= L1_SCRATCH_START && addr < L1_SCRATCH_START + L1_SCRATCH_LENGTH) + return false; + + /* Data banks will never have instructions */ + if (addr >= BOOT_ROM_START + BOOT_ROM_LENGTH && addr < L1_CODE_START) + return false; + + if (!get_mem16(&opcode0, address)) + return false; + + /* was this a 32-bit instruction? If so, get the next 16 bits */ + if ((opcode0 & 0xc000) == 0xc000) { + if (!get_mem16(&opcode1, address + 1)) + return false; + *val = (opcode0 << 16) + opcode1; + } else + *val = opcode0; + + return true; +} + +#if defined(CONFIG_DEBUG_BFIN_HWTRACE_ON) +/* + * decode the instruction if we are printing out the trace, as it + * makes things easier to follow, without running it through objdump + * Decode the change of flow, and the common load/store instructions + * which are the main cause for faults, and discontinuities in the trace + * buffer. + */ + +#define ProgCtrl_opcode 0x0000 +#define ProgCtrl_poprnd_bits 0 +#define ProgCtrl_poprnd_mask 0xf +#define ProgCtrl_prgfunc_bits 4 +#define ProgCtrl_prgfunc_mask 0xf +#define ProgCtrl_code_bits 8 +#define ProgCtrl_code_mask 0xff + +static void decode_ProgCtrl_0(unsigned int opcode) +{ + int poprnd = ((opcode >> ProgCtrl_poprnd_bits) & ProgCtrl_poprnd_mask); + int prgfunc = ((opcode >> ProgCtrl_prgfunc_bits) & ProgCtrl_prgfunc_mask); + + if (prgfunc == 0 && poprnd == 0) + pr_cont("NOP"); + else if (prgfunc == 1 && poprnd == 0) + pr_cont("RTS"); + else if (prgfunc == 1 && poprnd == 1) + pr_cont("RTI"); + else if (prgfunc == 1 && poprnd == 2) + pr_cont("RTX"); + else if (prgfunc == 1 && poprnd == 3) + pr_cont("RTN"); + else if (prgfunc == 1 && poprnd == 4) + pr_cont("RTE"); + else if (prgfunc == 2 && poprnd == 0) + pr_cont("IDLE"); + else if (prgfunc == 2 && poprnd == 3) + pr_cont("CSYNC"); + else if (prgfunc == 2 && poprnd == 4) + pr_cont("SSYNC"); + else if (prgfunc == 2 && poprnd == 5) + pr_cont("EMUEXCPT"); + else if (prgfunc == 3) + pr_cont("CLI R%i", poprnd); + else if (prgfunc == 4) + pr_cont("STI R%i", poprnd); + else if (prgfunc == 5) + pr_cont("JUMP (P%i)", poprnd); + else if (prgfunc == 6) + pr_cont("CALL (P%i)", poprnd); + else if (prgfunc == 7) + pr_cont("CALL (PC + P%i)", poprnd); + else if (prgfunc == 8) + pr_cont("JUMP (PC + P%i", poprnd); + else if (prgfunc == 9) + pr_cont("RAISE %i", poprnd); + else if (prgfunc == 10) + pr_cont("EXCPT %i", poprnd); + else + pr_cont("0x%04x", opcode); + +} + +#define BRCC_opcode 0x1000 +#define BRCC_offset_bits 0 +#define BRCC_offset_mask 0x3ff +#define BRCC_B_bits 10 +#define BRCC_B_mask 0x1 +#define BRCC_T_bits 11 +#define BRCC_T_mask 0x1 +#define BRCC_code_bits 12 +#define BRCC_code_mask 0xf + +static void decode_BRCC_0(unsigned int opcode) +{ + int B = ((opcode >> BRCC_B_bits) & BRCC_B_mask); + int T = ((opcode >> BRCC_T_bits) & BRCC_T_mask); + + pr_cont("IF %sCC JUMP pcrel %s", T ? "" : "!", B ? "(BP)" : ""); +} + +#define CALLa_opcode 0xe2000000 +#define CALLa_addr_bits 0 +#define CALLa_addr_mask 0xffffff +#define CALLa_S_bits 24 +#define CALLa_S_mask 0x1 +#define CALLa_code_bits 25 +#define CALLa_code_mask 0x7f + +static void decode_CALLa_0(unsigned int opcode) +{ + int S = ((opcode >> (CALLa_S_bits - 16)) & CALLa_S_mask); + + if (S) + pr_cont("CALL pcrel"); + else + pr_cont("JUMP.L"); +} + +#define LoopSetup_opcode 0xe0800000 +#define LoopSetup_eoffset_bits 0 +#define LoopSetup_eoffset_mask 0x3ff +#define LoopSetup_dontcare_bits 10 +#define LoopSetup_dontcare_mask 0x3 +#define LoopSetup_reg_bits 12 +#define LoopSetup_reg_mask 0xf +#define LoopSetup_soffset_bits 16 +#define LoopSetup_soffset_mask 0xf +#define LoopSetup_c_bits 20 +#define LoopSetup_c_mask 0x1 +#define LoopSetup_rop_bits 21 +#define LoopSetup_rop_mask 0x3 +#define LoopSetup_code_bits 23 +#define LoopSetup_code_mask 0x1ff + +static void decode_LoopSetup_0(unsigned int opcode) +{ + int c = ((opcode >> LoopSetup_c_bits) & LoopSetup_c_mask); + int reg = ((opcode >> LoopSetup_reg_bits) & LoopSetup_reg_mask); + int rop = ((opcode >> LoopSetup_rop_bits) & LoopSetup_rop_mask); + + pr_cont("LSETUP <> LC%i", c); + if ((rop & 1) == 1) + pr_cont("= P%i", reg); + if ((rop & 2) == 2) + pr_cont(" >> 0x1"); +} + +#define DspLDST_opcode 0x9c00 +#define DspLDST_reg_bits 0 +#define DspLDST_reg_mask 0x7 +#define DspLDST_i_bits 3 +#define DspLDST_i_mask 0x3 +#define DspLDST_m_bits 5 +#define DspLDST_m_mask 0x3 +#define DspLDST_aop_bits 7 +#define DspLDST_aop_mask 0x3 +#define DspLDST_W_bits 9 +#define DspLDST_W_mask 0x1 +#define DspLDST_code_bits 10 +#define DspLDST_code_mask 0x3f + +static void decode_dspLDST_0(unsigned int opcode) +{ + int i = ((opcode >> DspLDST_i_bits) & DspLDST_i_mask); + int m = ((opcode >> DspLDST_m_bits) & DspLDST_m_mask); + int W = ((opcode >> DspLDST_W_bits) & DspLDST_W_mask); + int aop = ((opcode >> DspLDST_aop_bits) & DspLDST_aop_mask); + int reg = ((opcode >> DspLDST_reg_bits) & DspLDST_reg_mask); + + if (W == 0) { + pr_cont("R%i", reg); + switch (m) { + case 0: + pr_cont(" = "); + break; + case 1: + pr_cont(".L = "); + break; + case 2: + pr_cont(".W = "); + break; + } + } + + pr_cont("[ I%i", i); + + switch (aop) { + case 0: + pr_cont("++ ]"); + break; + case 1: + pr_cont("-- ]"); + break; + } + + if (W == 1) { + pr_cont(" = R%i", reg); + switch (m) { + case 1: + pr_cont(".L = "); + break; + case 2: + pr_cont(".W = "); + break; + } + } +} + +#define LDST_opcode 0x9000 +#define LDST_reg_bits 0 +#define LDST_reg_mask 0x7 +#define LDST_ptr_bits 3 +#define LDST_ptr_mask 0x7 +#define LDST_Z_bits 6 +#define LDST_Z_mask 0x1 +#define LDST_aop_bits 7 +#define LDST_aop_mask 0x3 +#define LDST_W_bits 9 +#define LDST_W_mask 0x1 +#define LDST_sz_bits 10 +#define LDST_sz_mask 0x3 +#define LDST_code_bits 12 +#define LDST_code_mask 0xf + +static void decode_LDST_0(unsigned int opcode) +{ + int Z = ((opcode >> LDST_Z_bits) & LDST_Z_mask); + int W = ((opcode >> LDST_W_bits) & LDST_W_mask); + int sz = ((opcode >> LDST_sz_bits) & LDST_sz_mask); + int aop = ((opcode >> LDST_aop_bits) & LDST_aop_mask); + int reg = ((opcode >> LDST_reg_bits) & LDST_reg_mask); + int ptr = ((opcode >> LDST_ptr_bits) & LDST_ptr_mask); + + if (W == 0) + pr_cont("%s%i = ", (sz == 0 && Z == 1) ? "P" : "R", reg); + + switch (sz) { + case 1: + pr_cont("W"); + break; + case 2: + pr_cont("B"); + break; + } + + pr_cont("[P%i", ptr); + + switch (aop) { + case 0: + pr_cont("++"); + break; + case 1: + pr_cont("--"); + break; + } + pr_cont("]"); + + if (W == 1) + pr_cont(" = %s%i ", (sz == 0 && Z == 1) ? "P" : "R", reg); + + if (sz) { + if (Z) + pr_cont(" (X)"); + else + pr_cont(" (Z)"); + } +} + +#define LDSTii_opcode 0xa000 +#define LDSTii_reg_bit 0 +#define LDSTii_reg_mask 0x7 +#define LDSTii_ptr_bit 3 +#define LDSTii_ptr_mask 0x7 +#define LDSTii_offset_bit 6 +#define LDSTii_offset_mask 0xf +#define LDSTii_op_bit 10 +#define LDSTii_op_mask 0x3 +#define LDSTii_W_bit 12 +#define LDSTii_W_mask 0x1 +#define LDSTii_code_bit 13 +#define LDSTii_code_mask 0x7 + +static void decode_LDSTii_0(unsigned int opcode) +{ + int reg = ((opcode >> LDSTii_reg_bit) & LDSTii_reg_mask); + int ptr = ((opcode >> LDSTii_ptr_bit) & LDSTii_ptr_mask); + int offset = ((opcode >> LDSTii_offset_bit) & LDSTii_offset_mask); + int op = ((opcode >> LDSTii_op_bit) & LDSTii_op_mask); + int W = ((opcode >> LDSTii_W_bit) & LDSTii_W_mask); + + if (W == 0) { + pr_cont("%s%i = %s[P%i + %i]", op == 3 ? "R" : "P", reg, + op == 1 || op == 2 ? "" : "W", ptr, offset); + if (op == 2) + pr_cont("(Z)"); + if (op == 3) + pr_cont("(X)"); + } else { + pr_cont("%s[P%i + %i] = %s%i", op == 0 ? "" : "W", ptr, + offset, op == 3 ? "P" : "R", reg); + } +} + +#define LDSTidxI_opcode 0xe4000000 +#define LDSTidxI_offset_bits 0 +#define LDSTidxI_offset_mask 0xffff +#define LDSTidxI_reg_bits 16 +#define LDSTidxI_reg_mask 0x7 +#define LDSTidxI_ptr_bits 19 +#define LDSTidxI_ptr_mask 0x7 +#define LDSTidxI_sz_bits 22 +#define LDSTidxI_sz_mask 0x3 +#define LDSTidxI_Z_bits 24 +#define LDSTidxI_Z_mask 0x1 +#define LDSTidxI_W_bits 25 +#define LDSTidxI_W_mask 0x1 +#define LDSTidxI_code_bits 26 +#define LDSTidxI_code_mask 0x3f + +static void decode_LDSTidxI_0(unsigned int opcode) +{ + int Z = ((opcode >> LDSTidxI_Z_bits) & LDSTidxI_Z_mask); + int W = ((opcode >> LDSTidxI_W_bits) & LDSTidxI_W_mask); + int sz = ((opcode >> LDSTidxI_sz_bits) & LDSTidxI_sz_mask); + int reg = ((opcode >> LDSTidxI_reg_bits) & LDSTidxI_reg_mask); + int ptr = ((opcode >> LDSTidxI_ptr_bits) & LDSTidxI_ptr_mask); + int offset = ((opcode >> LDSTidxI_offset_bits) & LDSTidxI_offset_mask); + + if (W == 0) + pr_cont("%s%i = ", sz == 0 && Z == 1 ? "P" : "R", reg); + + if (sz == 1) + pr_cont("W"); + if (sz == 2) + pr_cont("B"); + + pr_cont("[P%i + %s0x%x]", ptr, offset & 0x20 ? "-" : "", + (offset & 0x1f) << 2); + + if (W == 0 && sz != 0) { + if (Z) + pr_cont("(X)"); + else + pr_cont("(Z)"); + } + + if (W == 1) + pr_cont("= %s%i", (sz == 0 && Z == 1) ? "P" : "R", reg); + +} + +static void decode_opcode(unsigned int opcode) +{ +#ifdef CONFIG_BUG + if (opcode == BFIN_BUG_OPCODE) + pr_cont("BUG"); + else +#endif + if ((opcode & 0xffffff00) == ProgCtrl_opcode) + decode_ProgCtrl_0(opcode); + else if ((opcode & 0xfffff000) == BRCC_opcode) + decode_BRCC_0(opcode); + else if ((opcode & 0xfffff000) == 0x2000) + pr_cont("JUMP.S"); + else if ((opcode & 0xfe000000) == CALLa_opcode) + decode_CALLa_0(opcode); + else if ((opcode & 0xff8000C0) == LoopSetup_opcode) + decode_LoopSetup_0(opcode); + else if ((opcode & 0xfffffc00) == DspLDST_opcode) + decode_dspLDST_0(opcode); + else if ((opcode & 0xfffff000) == LDST_opcode) + decode_LDST_0(opcode); + else if ((opcode & 0xffffe000) == LDSTii_opcode) + decode_LDSTii_0(opcode); + else if ((opcode & 0xfc000000) == LDSTidxI_opcode) + decode_LDSTidxI_0(opcode); + else if (opcode & 0xffff0000) + pr_cont("0x%08x", opcode); + else + pr_cont("0x%04x", opcode); +} + +#define BIT_MULTI_INS 0x08000000 +static void decode_instruction(unsigned short *address) +{ + unsigned int opcode; + + if (!get_instruction(&opcode, address)) + return; + + decode_opcode(opcode); + + /* If things are a 32-bit instruction, it has the possibility of being + * a multi-issue instruction (a 32-bit, and 2 16 bit instrucitions) + * This test collidates with the unlink instruction, so disallow that + */ + if ((opcode & 0xc0000000) == 0xc0000000 && + (opcode & BIT_MULTI_INS) && + (opcode & 0xe8000000) != 0xe8000000) { + pr_cont(" || "); + if (!get_instruction(&opcode, address + 2)) + return; + decode_opcode(opcode); + pr_cont(" || "); + if (!get_instruction(&opcode, address + 3)) + return; + decode_opcode(opcode); + } +} +#endif + +void dump_bfin_trace_buffer(void) +{ +#ifdef CONFIG_DEBUG_BFIN_HWTRACE_ON + int tflags, i = 0, fault = 0; + char buf[150]; + unsigned short *addr; + unsigned int cpu = raw_smp_processor_id(); +#ifdef CONFIG_DEBUG_BFIN_HWTRACE_EXPAND + int j, index; +#endif + + trace_buffer_save(tflags); + + pr_notice("Hardware Trace:\n"); + +#ifdef CONFIG_DEBUG_BFIN_HWTRACE_EXPAND + pr_notice("WARNING: Expanded trace turned on - can not trace exceptions\n"); +#endif + + if (likely(bfin_read_TBUFSTAT() & TBUFCNT)) { + for (; bfin_read_TBUFSTAT() & TBUFCNT; i++) { + addr = (unsigned short *)bfin_read_TBUF(); + decode_address(buf, (unsigned long)addr); + pr_notice("%4i Target : %s\n", i, buf); + /* Normally, the faulting instruction doesn't go into + * the trace buffer, (since it doesn't commit), so + * we print out the fault address here + */ + if (!fault && addr == ((unsigned short *)evt_ivhw)) { + addr = (unsigned short *)bfin_read_TBUF(); + decode_address(buf, (unsigned long)addr); + pr_notice(" FAULT : %s ", buf); + decode_instruction(addr); + pr_cont("\n"); + fault = 1; + continue; + } + if (!fault && addr == (unsigned short *)trap && + (cpu_pda[cpu].seqstat & SEQSTAT_EXCAUSE) > VEC_EXCPT15) { + decode_address(buf, cpu_pda[cpu].icplb_fault_addr); + pr_notice(" FAULT : %s ", buf); + decode_instruction((unsigned short *)cpu_pda[cpu].icplb_fault_addr); + pr_cont("\n"); + fault = 1; + } + addr = (unsigned short *)bfin_read_TBUF(); + decode_address(buf, (unsigned long)addr); + pr_notice(" Source : %s ", buf); + decode_instruction(addr); + pr_cont("\n"); + } + } + +#ifdef CONFIG_DEBUG_BFIN_HWTRACE_EXPAND + if (trace_buff_offset) + index = trace_buff_offset / 4; + else + index = EXPAND_LEN; + + j = (1 << CONFIG_DEBUG_BFIN_HWTRACE_EXPAND_LEN) * 128; + while (j) { + decode_address(buf, software_trace_buff[index]); + pr_notice("%4i Target : %s\n", i, buf); + index -= 1; + if (index < 0) + index = EXPAND_LEN; + decode_address(buf, software_trace_buff[index]); + pr_notice(" Source : %s ", buf); + decode_instruction((unsigned short *)software_trace_buff[index]); + pr_cont("\n"); + index -= 1; + if (index < 0) + index = EXPAND_LEN; + j--; + i++; + } +#endif + + trace_buffer_restore(tflags); +#endif +} +EXPORT_SYMBOL(dump_bfin_trace_buffer); + +void dump_bfin_process(struct pt_regs *fp) +{ + /* We should be able to look at fp->ipend, but we don't push it on the + * stack all the time, so do this until we fix that */ + unsigned int context = bfin_read_IPEND(); + + if (oops_in_progress) + pr_emerg("Kernel OOPS in progress\n"); + + if (context & 0x0020 && (fp->seqstat & SEQSTAT_EXCAUSE) == VEC_HWERR) + pr_notice("HW Error context\n"); + else if (context & 0x0020) + pr_notice("Deferred Exception context\n"); + else if (context & 0x3FC0) + pr_notice("Interrupt context\n"); + else if (context & 0x4000) + pr_notice("Deferred Interrupt context\n"); + else if (context & 0x8000) + pr_notice("Kernel process context\n"); + + /* Because we are crashing, and pointers could be bad, we check things + * pretty closely before we use them + */ + if ((unsigned long)current >= FIXED_CODE_START && + !((unsigned long)current & 0x3) && current->pid) { + pr_notice("CURRENT PROCESS:\n"); + if (current->comm >= (char *)FIXED_CODE_START) + pr_notice("COMM=%s PID=%d", + current->comm, current->pid); + else + pr_notice("COMM= invalid"); + + pr_cont(" CPU=%d\n", current_thread_info()->cpu); + if (!((unsigned long)current->mm & 0x3) && + (unsigned long)current->mm >= FIXED_CODE_START) { + pr_notice("TEXT = 0x%p-0x%p DATA = 0x%p-0x%p\n", + (void *)current->mm->start_code, + (void *)current->mm->end_code, + (void *)current->mm->start_data, + (void *)current->mm->end_data); + pr_notice(" BSS = 0x%p-0x%p USER-STACK = 0x%p\n\n", + (void *)current->mm->end_data, + (void *)current->mm->brk, + (void *)current->mm->start_stack); + } else + pr_notice("invalid mm\n"); + } else + pr_notice("No Valid process in current context\n"); +} + +void dump_bfin_mem(struct pt_regs *fp) +{ + unsigned short *addr, *erraddr, val = 0, err = 0; + char sti = 0, buf[6]; + + erraddr = (void *)fp->pc; + + pr_notice("return address: [0x%p]; contents of:", erraddr); + + for (addr = (unsigned short *)((unsigned long)erraddr & ~0xF) - 0x10; + addr < (unsigned short *)((unsigned long)erraddr & ~0xF) + 0x10; + addr++) { + if (!((unsigned long)addr & 0xF)) + pr_notice("0x%p: ", addr); + + if (!get_mem16(&val, addr)) { + val = 0; + sprintf(buf, "????"); + } else + sprintf(buf, "%04x", val); + + if (addr == erraddr) { + pr_cont("[%s]", buf); + err = val; + } else + pr_cont(" %s ", buf); + + /* Do any previous instructions turn on interrupts? */ + if (addr <= erraddr && /* in the past */ + ((val >= 0x0040 && val <= 0x0047) || /* STI instruction */ + val == 0x017b)) /* [SP++] = RETI */ + sti = 1; + } + + pr_cont("\n"); + + /* Hardware error interrupts can be deferred */ + if (unlikely(sti && (fp->seqstat & SEQSTAT_EXCAUSE) == VEC_HWERR && + oops_in_progress)){ + pr_notice("Looks like this was a deferred error - sorry\n"); +#ifndef CONFIG_DEBUG_HWERR + pr_notice("The remaining message may be meaningless\n"); + pr_notice("You should enable CONFIG_DEBUG_HWERR to get a better idea where it came from\n"); +#else + /* If we are handling only one peripheral interrupt + * and current mm and pid are valid, and the last error + * was in that user space process's text area + * print it out - because that is where the problem exists + */ + if ((!(((fp)->ipend & ~0x30) & (((fp)->ipend & ~0x30) - 1))) && + (current->pid && current->mm)) { + /* And the last RETI points to the current userspace context */ + if ((fp + 1)->pc >= current->mm->start_code && + (fp + 1)->pc <= current->mm->end_code) { + pr_notice("It might be better to look around here :\n"); + pr_notice("-------------------------------------------\n"); + show_regs(fp + 1); + pr_notice("-------------------------------------------\n"); + } + } +#endif + } +} + +void show_regs(struct pt_regs *fp) +{ + char buf[150]; + struct irqaction *action; + unsigned int i; + unsigned long flags = 0; + unsigned int cpu = raw_smp_processor_id(); + unsigned char in_atomic = (bfin_read_IPEND() & 0x10) || in_atomic(); + + pr_notice("\n"); + show_regs_print_info(KERN_NOTICE); + + if (CPUID != bfin_cpuid()) + pr_notice("Compiled for cpu family 0x%04x (Rev %d), " + "but running on:0x%04x (Rev %d)\n", + CPUID, bfin_compiled_revid(), bfin_cpuid(), bfin_revid()); + + pr_notice("ADSP-%s-0.%d", + CPU, bfin_compiled_revid()); + + if (bfin_compiled_revid() != bfin_revid()) + pr_cont("(Detected 0.%d)", bfin_revid()); + + pr_cont(" %lu(MHz CCLK) %lu(MHz SCLK) (%s)\n", + get_cclk()/1000000, get_sclk()/1000000, +#ifdef CONFIG_MPU + "mpu on" +#else + "mpu off" +#endif + ); + + pr_notice("%s", linux_banner); + + pr_notice("\nSEQUENCER STATUS:\t\t%s\n", print_tainted()); + pr_notice(" SEQSTAT: %08lx IPEND: %04lx IMASK: %04lx SYSCFG: %04lx\n", + (long)fp->seqstat, fp->ipend, cpu_pda[raw_smp_processor_id()].ex_imask, fp->syscfg); + if (fp->ipend & EVT_IRPTEN) + pr_notice(" Global Interrupts Disabled (IPEND[4])\n"); + if (!(cpu_pda[raw_smp_processor_id()].ex_imask & (EVT_IVG13 | EVT_IVG12 | EVT_IVG11 | + EVT_IVG10 | EVT_IVG9 | EVT_IVG8 | EVT_IVG7 | EVT_IVTMR))) + pr_notice(" Peripheral interrupts masked off\n"); + if (!(cpu_pda[raw_smp_processor_id()].ex_imask & (EVT_IVG15 | EVT_IVG14))) + pr_notice(" Kernel interrupts masked off\n"); + if ((fp->seqstat & SEQSTAT_EXCAUSE) == VEC_HWERR) { + pr_notice(" HWERRCAUSE: 0x%lx\n", + (fp->seqstat & SEQSTAT_HWERRCAUSE) >> 14); +#ifdef EBIU_ERRMST + /* If the error was from the EBIU, print it out */ + if (bfin_read_EBIU_ERRMST() & CORE_ERROR) { + pr_notice(" EBIU Error Reason : 0x%04x\n", + bfin_read_EBIU_ERRMST()); + pr_notice(" EBIU Error Address : 0x%08x\n", + bfin_read_EBIU_ERRADD()); + } +#endif + } + pr_notice(" EXCAUSE : 0x%lx\n", + fp->seqstat & SEQSTAT_EXCAUSE); + for (i = 2; i <= 15 ; i++) { + if (fp->ipend & (1 << i)) { + if (i != 4) { + decode_address(buf, bfin_read32(EVT0 + 4*i)); + pr_notice(" physical IVG%i asserted : %s\n", i, buf); + } else + pr_notice(" interrupts disabled\n"); + } + } + + /* if no interrupts are going off, don't print this out */ + if (fp->ipend & ~0x3F) { + for (i = 0; i < (NR_IRQS - 1); i++) { + struct irq_desc *desc = irq_to_desc(i); + if (!in_atomic) + raw_spin_lock_irqsave(&desc->lock, flags); + + action = desc->action; + if (!action) + goto unlock; + + decode_address(buf, (unsigned int)action->handler); + pr_notice(" logical irq %3d mapped : %s", i, buf); + for (action = action->next; action; action = action->next) { + decode_address(buf, (unsigned int)action->handler); + pr_cont(", %s", buf); + } + pr_cont("\n"); +unlock: + if (!in_atomic) + raw_spin_unlock_irqrestore(&desc->lock, flags); + } + } + + decode_address(buf, fp->rete); + pr_notice(" RETE: %s\n", buf); + decode_address(buf, fp->retn); + pr_notice(" RETN: %s\n", buf); + decode_address(buf, fp->retx); + pr_notice(" RETX: %s\n", buf); + decode_address(buf, fp->rets); + pr_notice(" RETS: %s\n", buf); + decode_address(buf, fp->pc); + pr_notice(" PC : %s\n", buf); + + if (((long)fp->seqstat & SEQSTAT_EXCAUSE) && + (((long)fp->seqstat & SEQSTAT_EXCAUSE) != VEC_HWERR)) { + decode_address(buf, cpu_pda[cpu].dcplb_fault_addr); + pr_notice("DCPLB_FAULT_ADDR: %s\n", buf); + decode_address(buf, cpu_pda[cpu].icplb_fault_addr); + pr_notice("ICPLB_FAULT_ADDR: %s\n", buf); + } + + pr_notice("PROCESSOR STATE:\n"); + pr_notice(" R0 : %08lx R1 : %08lx R2 : %08lx R3 : %08lx\n", + fp->r0, fp->r1, fp->r2, fp->r3); + pr_notice(" R4 : %08lx R5 : %08lx R6 : %08lx R7 : %08lx\n", + fp->r4, fp->r5, fp->r6, fp->r7); + pr_notice(" P0 : %08lx P1 : %08lx P2 : %08lx P3 : %08lx\n", + fp->p0, fp->p1, fp->p2, fp->p3); + pr_notice(" P4 : %08lx P5 : %08lx FP : %08lx SP : %08lx\n", + fp->p4, fp->p5, fp->fp, (long)fp); + pr_notice(" LB0: %08lx LT0: %08lx LC0: %08lx\n", + fp->lb0, fp->lt0, fp->lc0); + pr_notice(" LB1: %08lx LT1: %08lx LC1: %08lx\n", + fp->lb1, fp->lt1, fp->lc1); + pr_notice(" B0 : %08lx L0 : %08lx M0 : %08lx I0 : %08lx\n", + fp->b0, fp->l0, fp->m0, fp->i0); + pr_notice(" B1 : %08lx L1 : %08lx M1 : %08lx I1 : %08lx\n", + fp->b1, fp->l1, fp->m1, fp->i1); + pr_notice(" B2 : %08lx L2 : %08lx M2 : %08lx I2 : %08lx\n", + fp->b2, fp->l2, fp->m2, fp->i2); + pr_notice(" B3 : %08lx L3 : %08lx M3 : %08lx I3 : %08lx\n", + fp->b3, fp->l3, fp->m3, fp->i3); + pr_notice("A0.w: %08lx A0.x: %08lx A1.w: %08lx A1.x: %08lx\n", + fp->a0w, fp->a0x, fp->a1w, fp->a1x); + + pr_notice("USP : %08lx ASTAT: %08lx\n", + rdusp(), fp->astat); + + pr_notice("\n"); +} |