summaryrefslogtreecommitdiff
path: root/arch/blackfin/mach-bf533/boards/H8606.c
diff options
context:
space:
mode:
Diffstat (limited to 'arch/blackfin/mach-bf533/boards/H8606.c')
-rw-r--r--arch/blackfin/mach-bf533/boards/H8606.c452
1 files changed, 452 insertions, 0 deletions
diff --git a/arch/blackfin/mach-bf533/boards/H8606.c b/arch/blackfin/mach-bf533/boards/H8606.c
new file mode 100644
index 000000000..01300f40d
--- /dev/null
+++ b/arch/blackfin/mach-bf533/boards/H8606.c
@@ -0,0 +1,452 @@
+/*
+ * Copyright 2004-2009 Analog Devices Inc.
+ * 2007-2008 HV Sistemas S.L.
+ * Javier Herrero <jherrero@hvsistemas.es>
+ * 2005 National ICT Australia (NICTA)
+ * Aidan Williams <aidan@nicta.com.au>
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
+#include <linux/device.h>
+#include <linux/platform_device.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/flash.h>
+#if IS_ENABLED(CONFIG_USB_ISP1362_HCD)
+#include <linux/usb/isp1362.h>
+#endif
+#include <linux/irq.h>
+
+#include <asm/dma.h>
+#include <asm/bfin5xx_spi.h>
+#include <asm/reboot.h>
+#include <asm/portmux.h>
+
+/*
+ * Name the Board for the /proc/cpuinfo
+ */
+const char bfin_board_name[] = "HV Sistemas H8606";
+
+#if IS_ENABLED(CONFIG_RTC_DRV_BFIN)
+static struct platform_device rtc_device = {
+ .name = "rtc-bfin",
+ .id = -1,
+};
+#endif
+
+/*
+* Driver needs to know address, irq and flag pin.
+ */
+#if IS_ENABLED(CONFIG_DM9000)
+static struct resource dm9000_resources[] = {
+ [0] = {
+ .start = 0x20300000,
+ .end = 0x20300002,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = 0x20300004,
+ .end = 0x20300006,
+ .flags = IORESOURCE_MEM,
+ },
+ [2] = {
+ .start = IRQ_PF10,
+ .end = IRQ_PF10,
+ .flags = (IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE |
+ IORESOURCE_IRQ_SHAREABLE),
+ },
+};
+
+static struct platform_device dm9000_device = {
+ .id = 0,
+ .name = "dm9000",
+ .resource = dm9000_resources,
+ .num_resources = ARRAY_SIZE(dm9000_resources),
+};
+#endif
+
+#if IS_ENABLED(CONFIG_SMC91X)
+#include <linux/smc91x.h>
+
+static struct smc91x_platdata smc91x_info = {
+ .flags = SMC91X_USE_16BIT | SMC91X_NOWAIT,
+ .leda = RPC_LED_100_10,
+ .ledb = RPC_LED_TX_RX,
+};
+
+static struct resource smc91x_resources[] = {
+ {
+ .name = "smc91x-regs",
+ .start = 0x20300300,
+ .end = 0x20300300 + 16,
+ .flags = IORESOURCE_MEM,
+ }, {
+ .start = IRQ_PROG_INTB,
+ .end = IRQ_PROG_INTB,
+ .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
+ }, {
+ .start = IRQ_PF7,
+ .end = IRQ_PF7,
+ .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
+ },
+};
+
+static struct platform_device smc91x_device = {
+ .name = "smc91x",
+ .id = 0,
+ .num_resources = ARRAY_SIZE(smc91x_resources),
+ .resource = smc91x_resources,
+ .dev = {
+ .platform_data = &smc91x_info,
+ },
+};
+#endif
+
+#if IS_ENABLED(CONFIG_USB_NET2272)
+static struct resource net2272_bfin_resources[] = {
+ {
+ .start = 0x20300000,
+ .end = 0x20300000 + 0x100,
+ .flags = IORESOURCE_MEM,
+ }, {
+ .start = IRQ_PF10,
+ .end = IRQ_PF10,
+ .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
+ },
+};
+
+static struct platform_device net2272_bfin_device = {
+ .name = "net2272",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(net2272_bfin_resources),
+ .resource = net2272_bfin_resources,
+};
+#endif
+
+#if IS_ENABLED(CONFIG_SPI_BFIN5XX)
+/* all SPI peripherals info goes here */
+
+#if IS_ENABLED(CONFIG_MTD_M25P80)
+static struct mtd_partition bfin_spi_flash_partitions[] = {
+ {
+ .name = "bootloader (spi)",
+ .size = 0x40000,
+ .offset = 0,
+ .mask_flags = MTD_CAP_ROM
+ }, {
+ .name = "fpga (spi)",
+ .size = 0x30000,
+ .offset = 0x40000
+ }, {
+ .name = "linux kernel (spi)",
+ .size = 0x150000,
+ .offset = 0x70000
+ }, {
+ .name = "jffs2 root file system (spi)",
+ .size = 0x640000,
+ .offset = 0x1c0000,
+ }
+};
+
+static struct flash_platform_data bfin_spi_flash_data = {
+ .name = "m25p80",
+ .parts = bfin_spi_flash_partitions,
+ .nr_parts = ARRAY_SIZE(bfin_spi_flash_partitions),
+ .type = "m25p64",
+};
+
+/* SPI flash chip (m25p64) */
+static struct bfin5xx_spi_chip spi_flash_chip_info = {
+ .enable_dma = 0, /* use dma transfer with this chip*/
+};
+#endif
+
+/* Notice: for blackfin, the speed_hz is the value of register
+ * SPI_BAUD, not the real baudrate */
+static struct spi_board_info bfin_spi_board_info[] __initdata = {
+#if IS_ENABLED(CONFIG_MTD_M25P80)
+ {
+ /* the modalias must be the same as spi device driver name */
+ .modalias = "m25p80", /* Name of spi_driver for this device */
+ /* this value is the baudrate divisor */
+ .max_speed_hz = 50000000, /* actual baudrate is SCLK/(2xspeed_hz) */
+ .bus_num = 0, /* Framework bus number */
+ .chip_select = 2, /* Framework chip select. On STAMP537 it is SPISSEL2*/
+ .platform_data = &bfin_spi_flash_data,
+ .controller_data = &spi_flash_chip_info,
+ .mode = SPI_MODE_3,
+ },
+#endif
+
+#if IS_ENABLED(CONFIG_SND_BF5XX_SOC_AD183X)
+ {
+ .modalias = "ad183x",
+ .max_speed_hz = 16,
+ .bus_num = 1,
+ .chip_select = 4,
+ },
+#endif
+
+};
+
+/* SPI (0) */
+static struct resource bfin_spi0_resource[] = {
+ [0] = {
+ .start = SPI0_REGBASE,
+ .end = SPI0_REGBASE + 0xFF,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = CH_SPI,
+ .end = CH_SPI,
+ .flags = IORESOURCE_DMA,
+ },
+ [2] = {
+ .start = IRQ_SPI,
+ .end = IRQ_SPI,
+ .flags = IORESOURCE_IRQ,
+ }
+};
+
+
+/* SPI controller data */
+static struct bfin5xx_spi_master bfin_spi0_info = {
+ .num_chipselect = 8,
+ .enable_dma = 1, /* master has the ability to do dma transfer */
+ .pin_req = {P_SPI0_SCK, P_SPI0_MISO, P_SPI0_MOSI, 0},
+};
+
+static struct platform_device bfin_spi0_device = {
+ .name = "bfin-spi",
+ .id = 0, /* Bus number */
+ .num_resources = ARRAY_SIZE(bfin_spi0_resource),
+ .resource = bfin_spi0_resource,
+ .dev = {
+ .platform_data = &bfin_spi0_info, /* Passed to driver */
+ },
+};
+#endif /* spi master and devices */
+
+#if IS_ENABLED(CONFIG_SERIAL_BFIN)
+#ifdef CONFIG_SERIAL_BFIN_UART0
+static struct resource bfin_uart0_resources[] = {
+ {
+ .start = BFIN_UART_THR,
+ .end = BFIN_UART_GCTL+2,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .start = IRQ_UART0_TX,
+ .end = IRQ_UART0_TX,
+ .flags = IORESOURCE_IRQ,
+ },
+ {
+ .start = IRQ_UART0_RX,
+ .end = IRQ_UART0_RX,
+ .flags = IORESOURCE_IRQ,
+ },
+ {
+ .start = IRQ_UART0_ERROR,
+ .end = IRQ_UART0_ERROR,
+ .flags = IORESOURCE_IRQ,
+ },
+ {
+ .start = CH_UART0_TX,
+ .end = CH_UART0_TX,
+ .flags = IORESOURCE_DMA,
+ },
+ {
+ .start = CH_UART0_RX,
+ .end = CH_UART0_RX,
+ .flags = IORESOURCE_DMA,
+ },
+};
+
+static unsigned short bfin_uart0_peripherals[] = {
+ P_UART0_TX, P_UART0_RX, 0
+};
+
+static struct platform_device bfin_uart0_device = {
+ .name = "bfin-uart",
+ .id = 0,
+ .num_resources = ARRAY_SIZE(bfin_uart0_resources),
+ .resource = bfin_uart0_resources,
+ .dev = {
+ .platform_data = &bfin_uart0_peripherals, /* Passed to driver */
+ },
+};
+#endif
+#endif
+
+#if IS_ENABLED(CONFIG_BFIN_SIR)
+#ifdef CONFIG_BFIN_SIR0
+static struct resource bfin_sir0_resources[] = {
+ {
+ .start = 0xFFC00400,
+ .end = 0xFFC004FF,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .start = IRQ_UART0_RX,
+ .end = IRQ_UART0_RX+1,
+ .flags = IORESOURCE_IRQ,
+ },
+ {
+ .start = CH_UART0_RX,
+ .end = CH_UART0_RX+1,
+ .flags = IORESOURCE_DMA,
+ },
+};
+
+static struct platform_device bfin_sir0_device = {
+ .name = "bfin_sir",
+ .id = 0,
+ .num_resources = ARRAY_SIZE(bfin_sir0_resources),
+ .resource = bfin_sir0_resources,
+};
+#endif
+#endif
+
+#if IS_ENABLED(CONFIG_SERIAL_8250)
+
+#include <linux/serial_8250.h>
+#include <linux/serial.h>
+
+/*
+ * Configuration for two 16550 UARTS in FPGA at addresses 0x20200000 and 0x202000010.
+ * running at half system clock, both with interrupt output or-ed to PF8. Change to
+ * suit different FPGA configuration, or to suit real 16550 UARTS connected to the bus
+ */
+
+static struct plat_serial8250_port serial8250_platform_data [] = {
+ {
+ .membase = (void *)0x20200000,
+ .mapbase = 0x20200000,
+ .irq = IRQ_PF8,
+ .irqflags = IRQF_TRIGGER_HIGH,
+ .flags = UPF_BOOT_AUTOCONF | UART_CONFIG_TYPE,
+ .iotype = UPIO_MEM,
+ .regshift = 1,
+ .uartclk = 66666667,
+ }, {
+ .membase = (void *)0x20200010,
+ .mapbase = 0x20200010,
+ .irq = IRQ_PF8,
+ .irqflags = IRQF_TRIGGER_HIGH,
+ .flags = UPF_BOOT_AUTOCONF | UART_CONFIG_TYPE,
+ .iotype = UPIO_MEM,
+ .regshift = 1,
+ .uartclk = 66666667,
+ }, {
+ }
+};
+
+static struct platform_device serial8250_device = {
+ .id = PLAT8250_DEV_PLATFORM,
+ .name = "serial8250",
+ .dev = {
+ .platform_data = serial8250_platform_data,
+ },
+};
+
+#endif
+
+#if IS_ENABLED(CONFIG_KEYBOARD_OPENCORES)
+
+/*
+ * Configuration for one OpenCores keyboard controller in FPGA at address 0x20200030,
+ * interrupt output wired to PF9. Change to suit different FPGA configuration
+ */
+
+static struct resource opencores_kbd_resources[] = {
+ [0] = {
+ .start = 0x20200030,
+ .end = 0x20300030 + 2,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = IRQ_PF9,
+ .end = IRQ_PF9,
+ .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
+ },
+};
+
+static struct platform_device opencores_kbd_device = {
+ .id = -1,
+ .name = "opencores-kbd",
+ .resource = opencores_kbd_resources,
+ .num_resources = ARRAY_SIZE(opencores_kbd_resources),
+};
+#endif
+
+static struct platform_device *h8606_devices[] __initdata = {
+#if IS_ENABLED(CONFIG_RTC_DRV_BFIN)
+ &rtc_device,
+#endif
+
+#if IS_ENABLED(CONFIG_DM9000)
+ &dm9000_device,
+#endif
+
+#if IS_ENABLED(CONFIG_SMC91X)
+ &smc91x_device,
+#endif
+
+#if IS_ENABLED(CONFIG_USB_NET2272)
+ &net2272_bfin_device,
+#endif
+
+#if IS_ENABLED(CONFIG_SPI_BFIN5XX)
+ &bfin_spi0_device,
+#endif
+
+#if IS_ENABLED(CONFIG_SERIAL_BFIN)
+#ifdef CONFIG_SERIAL_BFIN_UART0
+ &bfin_uart0_device,
+#endif
+#endif
+
+#if IS_ENABLED(CONFIG_SERIAL_8250)
+ &serial8250_device,
+#endif
+
+#if IS_ENABLED(CONFIG_BFIN_SIR)
+#ifdef CONFIG_BFIN_SIR0
+ &bfin_sir0_device,
+#endif
+#endif
+
+#if IS_ENABLED(CONFIG_KEYBOARD_OPENCORES)
+ &opencores_kbd_device,
+#endif
+};
+
+static int __init H8606_init(void)
+{
+ printk(KERN_INFO "HV Sistemas H8606 board support by http://www.hvsistemas.com\n");
+ printk(KERN_INFO "%s(): registering device resources\n", __func__);
+ platform_add_devices(h8606_devices, ARRAY_SIZE(h8606_devices));
+#if IS_ENABLED(CONFIG_SPI_BFIN5XX)
+ spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info));
+#endif
+ return 0;
+}
+
+arch_initcall(H8606_init);
+
+static struct platform_device *H8606_early_devices[] __initdata = {
+#if defined(CONFIG_SERIAL_BFIN_CONSOLE) || defined(CONFIG_EARLY_PRINTK)
+#ifdef CONFIG_SERIAL_BFIN_UART0
+ &bfin_uart0_device,
+#endif
+#endif
+};
+
+void __init native_machine_early_platform_add_devices(void)
+{
+ printk(KERN_INFO "register early platform devices\n");
+ early_platform_add_devices(H8606_early_devices,
+ ARRAY_SIZE(H8606_early_devices));
+}