summaryrefslogtreecommitdiff
path: root/arch/blackfin/mach-bf561/secondary.S
diff options
context:
space:
mode:
Diffstat (limited to 'arch/blackfin/mach-bf561/secondary.S')
-rw-r--r--arch/blackfin/mach-bf561/secondary.S192
1 files changed, 192 insertions, 0 deletions
diff --git a/arch/blackfin/mach-bf561/secondary.S b/arch/blackfin/mach-bf561/secondary.S
new file mode 100644
index 000000000..01e540862
--- /dev/null
+++ b/arch/blackfin/mach-bf561/secondary.S
@@ -0,0 +1,192 @@
+/*
+ * BF561 coreB bootstrap file
+ *
+ * Copyright 2007-2009 Analog Devices Inc.
+ * Philippe Gerum <rpm@xenomai.org>
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
+#include <linux/linkage.h>
+#include <linux/init.h>
+#include <asm/blackfin.h>
+#include <asm/asm-offsets.h>
+#include <asm/trace.h>
+
+/*
+ * This code must come first as CoreB is hardcoded (in hardware)
+ * to start at the beginning of its L1 instruction memory.
+ */
+.section .l1.text.head
+
+/* Lay the initial stack into the L1 scratch area of Core B */
+#define INITIAL_STACK (COREB_L1_SCRATCH_START + L1_SCRATCH_LENGTH - 12)
+
+ENTRY(_coreb_trampoline_start)
+ /* Enable Cycle Counter and Nesting Of Interrupts */
+#ifdef CONFIG_BFIN_SCRATCH_REG_CYCLES
+ R0 = SYSCFG_SNEN;
+#else
+ R0 = SYSCFG_SNEN | SYSCFG_CCEN;
+#endif
+ SYSCFG = R0;
+
+ /* Optimization register tricks: keep a base value in the
+ * reserved P registers so we use the load/store with an
+ * offset syntax. R0 = [P5 + <constant>];
+ * P5 - core MMR base
+ * R6 - 0
+ */
+ r6 = 0;
+ p5.l = 0;
+ p5.h = hi(COREMMR_BASE);
+
+ /* Zero out registers required by Blackfin ABI */
+
+ /* Disable circular buffers */
+ L0 = r6;
+ L1 = r6;
+ L2 = r6;
+ L3 = r6;
+
+ /* Disable hardware loops in case we were started by 'go' */
+ LC0 = r6;
+ LC1 = r6;
+
+ /*
+ * Clear ITEST_COMMAND and DTEST_COMMAND registers,
+ * Leaving these as non-zero can confuse the emulator
+ */
+ [p5 + (DTEST_COMMAND - COREMMR_BASE)] = r6;
+ [p5 + (ITEST_COMMAND - COREMMR_BASE)] = r6;
+ CSYNC;
+
+ trace_buffer_init(p0,r0);
+
+ /* Turn off the icache */
+ r1 = [p5 + (IMEM_CONTROL - COREMMR_BASE)];
+ BITCLR (r1, ENICPLB_P);
+ [p5 + (IMEM_CONTROL - COREMMR_BASE)] = r1;
+ SSYNC;
+
+ /* Turn off the dcache */
+ r1 = [p5 + (DMEM_CONTROL - COREMMR_BASE)];
+ BITCLR (r1, ENDCPLB_P);
+ [p5 + (DMEM_CONTROL - COREMMR_BASE)] = r1;
+ SSYNC;
+
+ /* in case of double faults, save a few things */
+ p1.l = _initial_pda_coreb;
+ p1.h = _initial_pda_coreb;
+ r4 = RETX;
+#ifdef CONFIG_DEBUG_DOUBLEFAULT
+ /* Only save these if we are storing them,
+ * This happens here, since L1 gets clobbered
+ * below
+ */
+ GET_PDA(p0, r0);
+ r0 = [p0 + PDA_DF_RETX];
+ r1 = [p0 + PDA_DF_DCPLB];
+ r2 = [p0 + PDA_DF_ICPLB];
+ r3 = [p0 + PDA_DF_SEQSTAT];
+ [p1 + PDA_INIT_DF_RETX] = r0;
+ [p1 + PDA_INIT_DF_DCPLB] = r1;
+ [p1 + PDA_INIT_DF_ICPLB] = r2;
+ [p1 + PDA_INIT_DF_SEQSTAT] = r3;
+#endif
+ [p1 + PDA_INIT_RETX] = r4;
+
+ /* Initialize stack pointer */
+ sp.l = lo(INITIAL_STACK);
+ sp.h = hi(INITIAL_STACK);
+ fp = sp;
+ usp = sp;
+
+ /* This section keeps the processor in supervisor mode
+ * during core B startup. Branches to the idle task.
+ */
+
+ /* EVT15 = _real_start */
+
+ p1.l = _coreb_start;
+ p1.h = _coreb_start;
+ [p5 + (EVT15 - COREMMR_BASE)] = p1;
+ csync;
+
+ r0 = EVT_IVG15 (z);
+ sti r0;
+
+ raise 15;
+ p0.l = .LWAIT_HERE;
+ p0.h = .LWAIT_HERE;
+ reti = p0;
+#if defined(ANOMALY_05000281)
+ nop; nop; nop;
+#endif
+ rti;
+
+.LWAIT_HERE:
+ jump .LWAIT_HERE;
+ENDPROC(_coreb_trampoline_start)
+
+#ifdef CONFIG_HOTPLUG_CPU
+.section ".text"
+ENTRY(_coreb_die)
+ sp.l = lo(INITIAL_STACK);
+ sp.h = hi(INITIAL_STACK);
+ fp = sp;
+ usp = sp;
+
+ CLI R2;
+ SSYNC;
+ IDLE;
+ STI R2;
+
+ R0 = IWR_DISABLE_ALL;
+ P0.H = hi(SYSMMR_BASE);
+ P0.L = lo(SYSMMR_BASE);
+ [P0 + (SICB_IWR0 - SYSMMR_BASE)] = R0;
+ [P0 + (SICB_IWR1 - SYSMMR_BASE)] = R0;
+ SSYNC;
+
+ p0.h = hi(COREB_L1_CODE_START);
+ p0.l = lo(COREB_L1_CODE_START);
+ jump (p0);
+ENDPROC(_coreb_die)
+#endif
+
+__INIT
+ENTRY(_coreb_start)
+ [--sp] = reti;
+
+ p0.l = lo(WDOGB_CTL);
+ p0.h = hi(WDOGB_CTL);
+ r0 = 0xAD6(z);
+ w[p0] = r0; /* Clear the watchdog. */
+ ssync;
+
+ /*
+ * switch to IDLE stack.
+ */
+ p0.l = _secondary_stack;
+ p0.h = _secondary_stack;
+ sp = [p0];
+ usp = sp;
+ fp = sp;
+#ifdef CONFIG_HOTPLUG_CPU
+ p0.l = _hotplug_coreb;
+ p0.h = _hotplug_coreb;
+ r0 = [p0];
+ cc = BITTST(r0, 0);
+ if cc jump 3f;
+#endif
+ sp += -12;
+ call _init_pda
+ sp += 12;
+#ifdef CONFIG_HOTPLUG_CPU
+3:
+#endif
+ call _secondary_start_kernel;
+.L_exit:
+ jump.s .L_exit;
+ENDPROC(_coreb_start)