diff options
Diffstat (limited to 'arch/blackfin/mach-common/clocks-init.c')
| -rw-r--r-- | arch/blackfin/mach-common/clocks-init.c | 121 |
1 files changed, 121 insertions, 0 deletions
diff --git a/arch/blackfin/mach-common/clocks-init.c b/arch/blackfin/mach-common/clocks-init.c new file mode 100644 index 000000000..d436bd907 --- /dev/null +++ b/arch/blackfin/mach-common/clocks-init.c @@ -0,0 +1,121 @@ +/* + * arch/blackfin/mach-common/clocks-init.c - reprogram clocks / memory + * + * Copyright 2004-2008 Analog Devices Inc. + * + * Licensed under the GPL-2 or later. + */ + +#include <linux/linkage.h> +#include <asm/blackfin.h> + +#include <asm/dma.h> +#include <asm/clocks.h> +#include <asm/mem_init.h> +#include <asm/dpmc.h> + +#ifdef CONFIG_BF60x + +#define CGU_CTL_VAL ((CONFIG_VCO_MULT << 8) | CLKIN_HALF) +#define CGU_DIV_VAL \ + ((CONFIG_CCLK_DIV << CSEL_OFFSET) | \ + (CONFIG_SCLK_DIV << SYSSEL_OFFSET) | \ + (CONFIG_SCLK0_DIV << S0SEL_OFFSET) | \ + (CONFIG_SCLK1_DIV << S1SEL_OFFSET) | \ + (CONFIG_DCLK_DIV << DSEL_OFFSET)) + +#define CONFIG_BFIN_DCLK (((CONFIG_CLKIN_HZ * CONFIG_VCO_MULT) / CONFIG_DCLK_DIV) / 1000000) +#if ((CONFIG_BFIN_DCLK != 125) && \ + (CONFIG_BFIN_DCLK != 133) && (CONFIG_BFIN_DCLK != 150) && \ + (CONFIG_BFIN_DCLK != 166) && (CONFIG_BFIN_DCLK != 200) && \ + (CONFIG_BFIN_DCLK != 225) && (CONFIG_BFIN_DCLK != 250)) +#error "DCLK must be in (125, 133, 150, 166, 200, 225, 250)MHz" +#endif + +#else +#define SDGCTL_WIDTH (1 << 31) /* SDRAM external data path width */ +#define PLL_CTL_VAL \ + (((CONFIG_VCO_MULT & 63) << 9) | CLKIN_HALF | \ + (PLL_BYPASS << 8) | (ANOMALY_05000305 ? 0 : 0x8000)) +#endif + +__attribute__((l1_text)) +static void do_sync(void) +{ + __builtin_bfin_ssync(); +} + +__attribute__((l1_text)) +void init_clocks(void) +{ + /* Kill any active DMAs as they may trigger external memory accesses + * in the middle of reprogramming things, and that'll screw us up. + * For example, any automatic DMAs left by U-Boot for splash screens. + */ +#ifdef CONFIG_BF60x + init_cgu(CGU_DIV_VAL, CGU_CTL_VAL); + init_dmc(CONFIG_BFIN_DCLK); +#else + size_t i; + for (i = 0; i < MAX_DMA_CHANNELS; ++i) { + struct dma_register *dma = dma_io_base_addr[i]; + dma->cfg = 0; + } + + do_sync(); + +#ifdef SIC_IWR0 + bfin_write_SIC_IWR0(IWR_ENABLE(0)); +# ifdef SIC_IWR1 + /* BF52x system reset does not properly reset SIC_IWR1 which + * will screw up the bootrom as it relies on MDMA0/1 waking it + * up from IDLE instructions. See this report for more info: + * http://blackfin.uclinux.org/gf/tracker/4323 + */ + if (ANOMALY_05000435) + bfin_write_SIC_IWR1(IWR_ENABLE(10) | IWR_ENABLE(11)); + else + bfin_write_SIC_IWR1(IWR_DISABLE_ALL); +# endif +# ifdef SIC_IWR2 + bfin_write_SIC_IWR2(IWR_DISABLE_ALL); +# endif +#else + bfin_write_SIC_IWR(IWR_ENABLE(0)); +#endif + do_sync(); +#ifdef EBIU_SDGCTL + bfin_write_EBIU_SDGCTL(bfin_read_EBIU_SDGCTL() | SRFS); + do_sync(); +#endif + +#ifdef CLKBUFOE + bfin_write16(VR_CTL, bfin_read_VR_CTL() | CLKBUFOE); + do_sync(); + __asm__ __volatile__("IDLE;"); +#endif + bfin_write_PLL_LOCKCNT(0x300); + do_sync(); + /* We always write PLL_CTL thus avoiding Anomaly 05000242 */ + bfin_write16(PLL_CTL, PLL_CTL_VAL); + __asm__ __volatile__("IDLE;"); + bfin_write_PLL_DIV(CONFIG_CCLK_ACT_DIV | CONFIG_SCLK_DIV); +#ifdef EBIU_SDGCTL + bfin_write_EBIU_SDRRC(mem_SDRRC); + bfin_write_EBIU_SDGCTL((bfin_read_EBIU_SDGCTL() & SDGCTL_WIDTH) | mem_SDGCTL); +#else + bfin_write_EBIU_RSTCTL(bfin_read_EBIU_RSTCTL() & ~(SRREQ)); + do_sync(); + bfin_write_EBIU_RSTCTL(bfin_read_EBIU_RSTCTL() | 0x1); + bfin_write_EBIU_DDRCTL0(mem_DDRCTL0); + bfin_write_EBIU_DDRCTL1(mem_DDRCTL1); + bfin_write_EBIU_DDRCTL2(mem_DDRCTL2); +#ifdef CONFIG_MEM_EBIU_DDRQUE + bfin_write_EBIU_DDRQUE(CONFIG_MEM_EBIU_DDRQUE); +#endif +#endif +#endif + do_sync(); + bfin_read16(0); + +} |