summaryrefslogtreecommitdiff
path: root/arch/cris/Kconfig
diff options
context:
space:
mode:
Diffstat (limited to 'arch/cris/Kconfig')
-rw-r--r--arch/cris/Kconfig577
1 files changed, 577 insertions, 0 deletions
diff --git a/arch/cris/Kconfig b/arch/cris/Kconfig
new file mode 100644
index 000000000..0314e325a
--- /dev/null
+++ b/arch/cris/Kconfig
@@ -0,0 +1,577 @@
+config MMU
+ bool
+ default y
+
+config ZONE_DMA
+ bool
+ default y
+
+config RWSEM_GENERIC_SPINLOCK
+ bool
+ default y
+
+config RWSEM_XCHGADD_ALGORITHM
+ bool
+
+config ARCH_HAS_ILOG2_U32
+ bool
+ default n
+
+config ARCH_HAS_ILOG2_U64
+ bool
+ default n
+
+config GENERIC_HWEIGHT
+ bool
+ default y
+
+config GENERIC_CALIBRATE_DELAY
+ bool
+ default y
+
+config NO_IOPORT_MAP
+ def_bool y
+
+config FORCE_MAX_ZONEORDER
+ int
+ default 6
+
+config CRIS
+ bool
+ default y
+ select HAVE_IDE
+ select GENERIC_ATOMIC64
+ select HAVE_UID16
+ select VIRT_TO_BUS
+ select ARCH_WANT_IPC_PARSE_VERSION
+ select GENERIC_IRQ_SHOW
+ select GENERIC_IOMAP
+ select GENERIC_CMOS_UPDATE
+ select MODULES_USE_ELF_RELA
+ select CLONE_BACKWARDS2
+ select OLD_SIGSUSPEND
+ select OLD_SIGACTION
+ select ARCH_REQUIRE_GPIOLIB
+ select IRQ_DOMAIN if ETRAX_ARCH_V32
+ select OF if ETRAX_ARCH_V32
+ select OF_EARLY_FLATTREE if ETRAX_ARCH_V32
+ select CLKSRC_MMIO if ETRAX_ARCH_V32
+ select GENERIC_CLOCKEVENTS if ETRAX_ARCH_V32
+ select GENERIC_SCHED_CLOCK if ETRAX_ARCH_V32
+
+config HZ
+ int
+ default 100
+
+config NR_CPUS
+ int
+ default "1"
+
+config BUILTIN_DTB
+ string "DTB to build into the kernel image"
+ depends on OF
+
+source "init/Kconfig"
+
+source "kernel/Kconfig.freezer"
+
+menu "General setup"
+
+source "fs/Kconfig.binfmt"
+
+config ETRAX_CMDLINE
+ string "Kernel command line"
+ default "root=/dev/mtdblock3"
+ help
+ Pass additional commands to the kernel.
+
+config ETRAX_WATCHDOG
+ bool "Enable ETRAX watchdog"
+ help
+ Enable the built-in watchdog timer support on ETRAX based embedded
+ network computers.
+
+config ETRAX_WATCHDOG_NICE_DOGGY
+ bool "Disable watchdog during Oops printouts"
+ depends on ETRAX_WATCHDOG
+ help
+ By enabling this you make sure that the watchdog does not bite while
+ printing oopses. Recommended for development systems but not for
+ production releases.
+
+config ETRAX_FAST_TIMER
+ bool "Enable ETRAX fast timer API"
+ help
+ This options enables the API to a fast timer implementation using
+ timer1 to get sub jiffie resolution timers (primarily one-shot
+ timers).
+ This is needed if CONFIG_ETRAX_SERIAL_FAST_TIMER is enabled.
+
+config ETRAX_KMALLOCED_MODULES
+ bool "Enable module allocation with kmalloc"
+ help
+ Enable module allocation with kmalloc instead of vmalloc.
+
+source "kernel/Kconfig.preempt"
+
+source mm/Kconfig
+
+endmenu
+
+menu "Hardware setup"
+
+choice
+ prompt "Processor type"
+ default ETRAX100LX
+
+config ETRAX100LX
+ bool "ETRAX-100LX-v1"
+ select ARCH_USES_GETTIMEOFFSET
+ help
+ Support version 1 of the ETRAX 100LX.
+
+config ETRAX100LX_V2
+ bool "ETRAX-100LX-v2"
+ select ARCH_USES_GETTIMEOFFSET
+ help
+ Support version 2 of the ETRAX 100LX.
+
+config ETRAXFS
+ bool "ETRAX-FS-V32"
+ help
+ Support CRIS V32.
+
+config CRIS_MACH_ARTPEC3
+ bool "ARTPEC-3"
+ help
+ Support Axis ARTPEC-3.
+
+endchoice
+
+config ETRAX_ARCH_V10
+ bool
+ default y if ETRAX100LX || ETRAX100LX_V2
+ default n if !(ETRAX100LX || ETRAX100LX_V2)
+ select TTY
+
+config ETRAX_ARCH_V32
+ bool
+ default y if (ETRAXFS || CRIS_MACH_ARTPEC3)
+ default n if !(ETRAXFS || CRIS_MACH_ARTPEC3)
+
+config ETRAX_DRAM_SIZE
+ int "DRAM size (dec, in MB)"
+ default "8"
+ help
+ Size of DRAM (decimal in MB) typically 2, 8 or 16.
+
+config ETRAX_VMEM_SIZE
+ int "Video memory size (dec, in MB)"
+ depends on ETRAX_ARCH_V32 && !ETRAXFS
+ default 8 if !ETRAXFS
+ help
+ Size of Video accessible memory (decimal, in MB).
+
+config ETRAX_FLASH_BUSWIDTH
+ int "Buswidth of NOR flash in bytes"
+ default "2"
+ help
+ Width in bytes of the NOR Flash bus (1, 2 or 4). Is usually 2.
+
+config ETRAX_FLASH1_SIZE
+ int "FLASH1 size (dec, in MB. 0 = Unknown)"
+ default "0"
+
+choice
+ prompt "Product debug-port"
+ default ETRAX_DEBUG_PORT0
+
+config ETRAX_DEBUG_PORT0
+ bool "Serial-0"
+ help
+ Choose a serial port for the ETRAX debug console. Default to
+ port 0.
+
+config ETRAX_DEBUG_PORT1
+ bool "Serial-1"
+ help
+ Use serial port 1 for the console.
+
+config ETRAX_DEBUG_PORT2
+ bool "Serial-2"
+ help
+ Use serial port 2 for the console.
+
+config ETRAX_DEBUG_PORT3
+ bool "Serial-3"
+ help
+ Use serial port 3 for the console.
+
+config ETRAX_DEBUG_PORT_NULL
+ bool "disabled"
+ help
+ Disable serial-port debugging.
+
+endchoice
+
+choice
+ prompt "Kernel GDB port"
+ depends on ETRAX_KGDB
+ default ETRAX_KGDB_PORT0
+ help
+ Choose a serial port for kernel debugging. NOTE: This port should
+ not be enabled under Drivers for built-in interfaces (as it has its
+ own initialization code) and should not be the same as the debug port.
+
+config ETRAX_KGDB_PORT0
+ bool "Serial-0"
+ help
+ Use serial port 0 for kernel debugging.
+
+config ETRAX_KGDB_PORT1
+ bool "Serial-1"
+ help
+ Use serial port 1 for kernel debugging.
+
+config ETRAX_KGDB_PORT2
+ bool "Serial-2"
+ help
+ Use serial port 2 for kernel debugging.
+
+config ETRAX_KGDB_PORT3
+ bool "Serial-3"
+ help
+ Use serial port 3 for kernel debugging.
+
+endchoice
+
+source arch/cris/arch-v10/Kconfig
+source arch/cris/arch-v32/Kconfig
+
+endmenu
+
+source "net/Kconfig"
+
+# bring in ETRAX built-in drivers
+menu "Drivers for built-in interfaces"
+source arch/cris/arch-v10/drivers/Kconfig
+source arch/cris/arch-v32/drivers/Kconfig
+
+config ETRAX_AXISFLASHMAP
+ bool "Axis flash-map support"
+ select MTD
+ select MTD_CFI
+ select MTD_CFI_AMDSTD
+ select MTD_JEDECPROBE if ETRAX_ARCH_V32
+ select MTD_BLOCK
+ select MTD_COMPLEX_MAPPINGS
+ help
+ This option enables MTD mapping of flash devices. Needed to use
+ flash memories. If unsure, say Y.
+
+config ETRAX_SYNCHRONOUS_SERIAL
+ bool "Synchronous serial-port support"
+ help
+ Select this to enable the synchronous serial port driver.
+
+config ETRAX_SYNCHRONOUS_SERIAL_PORT0
+ bool "Synchronous serial port 0 enabled"
+ depends on ETRAX_SYNCHRONOUS_SERIAL
+ help
+ Enabled synchronous serial port 0.
+
+config ETRAX_SYNCHRONOUS_SERIAL0_DMA
+ bool "Enable DMA on synchronous serial port 0."
+ depends on ETRAX_SYNCHRONOUS_SERIAL_PORT0
+ help
+ A synchronous serial port can run in manual or DMA mode.
+ Selecting this option will make it run in DMA mode.
+
+config ETRAX_SYNCHRONOUS_SERIAL_PORT1
+ bool "Synchronous serial port 1 enabled"
+ depends on ETRAX_SYNCHRONOUS_SERIAL && (ETRAXFS || ETRAX_ARCH_V10)
+ help
+ Enabled synchronous serial port 1.
+
+config ETRAX_SYNCHRONOUS_SERIAL1_DMA
+ bool "Enable DMA on synchronous serial port 1."
+ depends on ETRAX_SYNCHRONOUS_SERIAL_PORT1
+ help
+ A synchronous serial port can run in manual or DMA mode.
+ Selecting this option will make it run in DMA mode.
+
+choice
+ prompt "Network LED behavior"
+ depends on ETRAX_ETHERNET
+ default ETRAX_NETWORK_LED_ON_WHEN_ACTIVITY
+
+config ETRAX_NETWORK_LED_ON_WHEN_LINK
+ bool "LED_on_when_link"
+ help
+ Selecting LED_on_when_link will light the LED when there is a
+ connection and will flash off when there is activity.
+
+ Selecting LED_on_when_activity will light the LED only when
+ there is activity.
+
+ This setting will also affect the behaviour of other activity LEDs
+ e.g. Bluetooth.
+
+config ETRAX_NETWORK_LED_ON_WHEN_ACTIVITY
+ bool "LED_on_when_activity"
+ help
+ Selecting LED_on_when_link will light the LED when there is a
+ connection and will flash off when there is activity.
+
+ Selecting LED_on_when_activity will light the LED only when
+ there is activity.
+
+ This setting will also affect the behaviour of other activity LEDs
+ e.g. Bluetooth.
+
+endchoice
+
+choice
+ prompt "Ser0 DMA out channel"
+ depends on ETRAX_SERIAL_PORT0
+ default ETRAX_SERIAL_PORT0_DMA6_OUT if ETRAX_ARCH_V32
+ default ETRAX_SERIAL_PORT0_NO_DMA_OUT if ETRAX_ARCH_V10
+
+config ETRAX_SERIAL_PORT0_NO_DMA_OUT
+ bool "Ser0 uses no DMA for output"
+ help
+ Do not use DMA for ser0 output.
+
+config ETRAX_SERIAL_PORT0_DMA6_OUT
+ bool "Ser0 uses DMA6 for output"
+ depends on ETRAXFS
+ help
+ Enables the DMA6 output channel for ser0 (ttyS0).
+ If you do not enable DMA, an interrupt for each character will be
+ used when transmitting data.
+ Normally you want to use DMA, unless you use the DMA channel for
+ something else.
+
+config ETRAX_SERIAL_PORT0_DMA0_OUT
+ bool "Ser0 uses DMA0 for output"
+ depends on CRIS_MACH_ARTPEC3
+ help
+ Enables the DMA0 output channel for ser0 (ttyS0).
+ If you do not enable DMA, an interrupt for each character will be
+ used when transmitting data.
+ Normally you want to use DMA, unless you use the DMA channel for
+ something else.
+
+endchoice
+
+choice
+ prompt "Ser0 DMA in channel "
+ depends on ETRAX_SERIAL_PORT0
+ default ETRAX_SERIAL_PORT0_NO_DMA_IN if ETRAX_ARCH_V32
+ default ETRAX_SERIAL_PORT0_DMA7_IN if ETRAX_ARCH_V10
+ help
+ What DMA channel to use for ser0.
+
+config ETRAX_SERIAL_PORT0_NO_DMA_IN
+ bool "Ser0 uses no DMA for input"
+ help
+ Do not use DMA for ser0 input.
+
+config ETRAX_SERIAL_PORT0_DMA7_IN
+ bool "Ser0 uses DMA7 for input"
+ depends on ETRAXFS
+ help
+ Enables the DMA7 input channel for ser0 (ttyS0).
+ If you do not enable DMA, an interrupt for each character will be
+ used when receiving data.
+ Normally you want to use DMA, unless you use the DMA channel for
+ something else.
+
+config ETRAX_SERIAL_PORT0_DMA1_IN
+ bool "Ser0 uses DMA1 for input"
+ depends on CRIS_MACH_ARTPEC3
+ help
+ Enables the DMA1 input channel for ser0 (ttyS0).
+ If you do not enable DMA, an interrupt for each character will be
+ used when receiving data.
+ Normally you want to use DMA, unless you use the DMA channel for
+ something else.
+
+endchoice
+
+choice
+ prompt "Ser1 DMA in channel "
+ depends on ETRAX_SERIAL_PORT1
+ default ETRAX_SERIAL_PORT1_NO_DMA_IN if ETRAX_ARCH_V32
+ default ETRAX_SERIAL_PORT1_DMA9_IN if ETRAX_ARCH_V10
+ help
+ What DMA channel to use for ser1.
+
+config ETRAX_SERIAL_PORT1_NO_DMA_IN
+ bool "Ser1 uses no DMA for input"
+ help
+ Do not use DMA for ser1 input.
+
+config ETRAX_SERIAL_PORT1_DMA5_IN
+ bool "Ser1 uses DMA5 for input"
+ depends on ETRAX_ARCH_V32
+ help
+ Enables the DMA5 input channel for ser1 (ttyS1).
+ If you do not enable DMA, an interrupt for each character will be
+ used when receiving data.
+ Normally you want this on, unless you use the DMA channel for
+ something else.
+
+config ETRAX_SERIAL_PORT1_DMA9_IN
+ depends on ETRAX_ARCH_V10
+ bool "Ser1 uses DMA9 for input"
+
+endchoice
+
+
+choice
+ prompt "Ser1 DMA out channel"
+ depends on ETRAX_SERIAL_PORT1
+ default ETRAX_SERIAL_PORT1_NO_DMA_OUT if ETRAX_ARCH_V32
+ default ETRAX_SERIAL_PORT1_DMA8_OUT if ETRAX_ARCH_V10
+ help
+ What DMA channel to use for ser1.
+
+config ETRAX_SERIAL_PORT1_NO_DMA_OUT
+ bool "Ser1 uses no DMA for output"
+ help
+ Do not use DMA for ser1 output.
+
+config ETRAX_SERIAL_PORT1_DMA8_OUT
+ depends on ETRAX_ARCH_V10
+ bool "Ser1 uses DMA8 for output"
+
+config ETRAX_SERIAL_PORT1_DMA4_OUT
+ depends on ETRAX_ARCH_V32
+ bool "Ser1 uses DMA4 for output"
+ help
+ Enables the DMA4 output channel for ser1 (ttyS1).
+ If you do not enable DMA, an interrupt for each character will be
+ used when transmitting data.
+ Normally you want this on, unless you use the DMA channel for
+ something else.
+
+endchoice
+
+choice
+ prompt "Ser2 DMA out channel"
+ depends on ETRAX_SERIAL_PORT2
+ default ETRAX_SERIAL_PORT2_NO_DMA_OUT if ETRAX_ARCH_V32
+ default ETRAX_SERIAL_PORT2_DMA2_OUT if ETRAX_ARCH_V10
+
+config ETRAX_SERIAL_PORT2_NO_DMA_OUT
+ bool "Ser2 uses no DMA for output"
+ help
+ Do not use DMA for ser2 output.
+
+config ETRAX_SERIAL_PORT2_DMA2_OUT
+ bool "Ser2 uses DMA2 for output"
+ depends on ETRAXFS || ETRAX_ARCH_V10
+ help
+ Enables the DMA2 output channel for ser2 (ttyS2).
+ If you do not enable DMA, an interrupt for each character will be
+ used when transmitting data.
+ Normally you want to use DMA, unless you use the DMA channel for
+ something else.
+
+config ETRAX_SERIAL_PORT2_DMA6_OUT
+ bool "Ser2 uses DMA6 for output"
+ depends on CRIS_MACH_ARTPEC3
+ help
+ Enables the DMA6 output channel for ser2 (ttyS2).
+ If you do not enable DMA, an interrupt for each character will be
+ used when transmitting data.
+ Normally you want to use DMA, unless you use the DMA channel for
+ something else.
+
+endchoice
+
+choice
+ prompt "Ser2 DMA in channel"
+ depends on ETRAX_SERIAL_PORT2
+ default ETRAX_SERIAL_PORT2_NO_DMA_IN if ETRAX_ARCH_V32
+ default ETRAX_SERIAL_PORT2_DMA3_IN if ETRAX_ARCH_V10
+ help
+ What DMA channel to use for ser2.
+
+config ETRAX_SERIAL_PORT2_NO_DMA_IN
+ bool "Ser2 uses no DMA for input"
+ help
+ Do not use DMA for ser2 input.
+
+config ETRAX_SERIAL_PORT2_DMA3_IN
+ bool "Ser2 uses DMA3 for input"
+ depends on ETRAXFS || ETRAX_ARCH_V10
+ help
+ Enables the DMA3 input channel for ser2 (ttyS2).
+ If you do not enable DMA, an interrupt for each character will be
+ used when receiving data.
+ Normally you want to use DMA, unless you use the DMA channel for
+ something else.
+
+config ETRAX_SERIAL_PORT2_DMA7_IN
+ bool "Ser2 uses DMA7 for input"
+ depends on CRIS_MACH_ARTPEC3
+ help
+ Enables the DMA7 input channel for ser2 (ttyS2).
+ If you do not enable DMA, an interrupt for each character will be
+ used when receiving data.
+ Normally you want to use DMA, unless you use the DMA channel for
+ something else.
+
+endchoice
+
+choice
+ prompt "Ser3 DMA in channel"
+ depends on ETRAX_SERIAL_PORT3
+ default ETRAX_SERIAL_PORT3_NO_DMA_IN if ETRAX_ARCH_V32
+ default ETRAX_SERIAL_PORT3_DMA5_IN if ETRAX_ARCH_V10
+ help
+ What DMA channel to use for ser3.
+
+config ETRAX_SERIAL_PORT3_NO_DMA_IN
+ bool "Ser3 uses no DMA for input"
+ help
+ Do not use DMA for ser3 input.
+
+config ETRAX_SERIAL_PORT3_DMA5_IN
+ depends on ETRAX_ARCH_V10
+ bool "DMA 5"
+
+endchoice
+
+choice
+ prompt "Ser3 DMA out channel"
+ depends on ETRAX_SERIAL_PORT3
+ default ETRAX_SERIAL_PORT3_NO_DMA_OUT if ETRAX_ARCH_V32
+ default ETRAX_SERIAL_PORT3_DMA4_OUT if ETRAX_ARCH_V10
+
+config ETRAX_SERIAL_PORT3_NO_DMA_OUT
+ bool "Ser3 uses no DMA for output"
+ help
+ Do not use DMA for ser3 output.
+
+config ETRAX_SERIAL_PORT3_DMA4_OUT
+ depends on ETRAX_ARCH_V10
+ bool "DMA 4"
+
+endchoice
+
+endmenu
+
+source "drivers/Kconfig"
+
+source "fs/Kconfig"
+
+source "arch/cris/Kconfig.debug"
+
+source "security/Kconfig"
+
+source "crypto/Kconfig"
+
+source "lib/Kconfig"