summaryrefslogtreecommitdiff
path: root/arch/cris/arch-v10/kernel/entry.S
diff options
context:
space:
mode:
Diffstat (limited to 'arch/cris/arch-v10/kernel/entry.S')
-rw-r--r--arch/cris/arch-v10/kernel/entry.S969
1 files changed, 969 insertions, 0 deletions
diff --git a/arch/cris/arch-v10/kernel/entry.S b/arch/cris/arch-v10/kernel/entry.S
new file mode 100644
index 000000000..81570fcd0
--- /dev/null
+++ b/arch/cris/arch-v10/kernel/entry.S
@@ -0,0 +1,969 @@
+/*
+ * linux/arch/cris/entry.S
+ *
+ * Copyright (C) 2000, 2001, 2002 Axis Communications AB
+ *
+ * Authors: Bjorn Wesen (bjornw@axis.com)
+ */
+
+/*
+ * entry.S contains the system-call and fault low-level handling routines.
+ *
+ * NOTE: This code handles signal-recognition, which happens every time
+ * after a timer-interrupt and after each system call.
+ *
+ * Stack layout in 'ret_from_system_call':
+ * ptrace needs to have all regs on the stack.
+ * if the order here is changed, it needs to be
+ * updated in fork.c:copy_process, signal.c:do_signal,
+ * ptrace.c and ptrace.h
+ *
+ */
+
+#include <linux/linkage.h>
+#include <linux/sys.h>
+#include <asm/unistd.h>
+#include <arch/sv_addr_ag.h>
+#include <asm/errno.h>
+#include <asm/thread_info.h>
+#include <asm/asm-offsets.h>
+#include <asm/page.h>
+#include <asm/pgtable.h>
+
+ ;; functions exported from this file
+
+ .globl system_call
+ .globl ret_from_intr
+ .globl ret_from_fork
+ .globl ret_from_kernel_thread
+ .globl resume
+ .globl multiple_interrupt
+ .globl hwbreakpoint
+ .globl IRQ1_interrupt
+ .globl spurious_interrupt
+ .globl hw_bp_trigs
+ .globl mmu_bus_fault
+ .globl do_sigtrap
+ .globl gdb_handle_breakpoint
+ .globl sys_call_table
+
+ ;; below are various parts of system_call which are not in the fast-path
+
+#ifdef CONFIG_PREEMPT
+ ; Check if preemptive kernel scheduling should be done
+_resume_kernel:
+ di
+ ; Load current task struct
+ movs.w -8192, $r0 ; THREAD_SIZE = 8192
+ and.d $sp, $r0
+ move.d [$r0+TI_preempt_count], $r10 ; Preemption disabled?
+ bne _Rexit
+ nop
+_need_resched:
+ move.d [$r0+TI_flags], $r10
+ btstq TIF_NEED_RESCHED, $r10 ; Check if need_resched is set
+ bpl _Rexit
+ nop
+ ; Ok, lets's do some preemptive kernel scheduling
+ jsr preempt_schedule_irq
+ ; Load new task struct
+ movs.w -8192, $r0 ; THREAD_SIZE = 8192
+ and.d $sp, $r0
+ ; One more time (with new task)
+ ba _need_resched
+ nop
+#else
+#define _resume_kernel _Rexit
+#endif
+
+ ; Called at exit from fork. schedule_tail must be called to drop
+ ; spinlock if CONFIG_PREEMPT
+ret_from_fork:
+ jsr schedule_tail
+ ba ret_from_sys_call
+ nop
+
+ret_from_kernel_thread:
+ jsr schedule_tail
+ move.d $r2, $r10 ; argument is here
+ jsr $r1 ; call the payload
+ moveq 0, $r9 ; no syscall restarts, TYVM...
+ ba ret_from_sys_call
+
+ret_from_intr:
+ ;; check for resched if preemptive kernel or if we're going back to user-mode
+ ;; this test matches the user_regs(regs) macro
+ ;; we cannot simply test $dccr, because that does not necessarily
+ ;; reflect what mode we'll return into.
+
+ move.d [$sp + PT_dccr], $r0; regs->dccr
+ btstq 8, $r0 ; U-flag
+ bpl _resume_kernel
+ ; Note that di below is in delay slot
+
+_resume_userspace:
+ di ; so need_resched and sigpending don't change
+
+ movs.w -8192, $r0 ; THREAD_SIZE == 8192
+ and.d $sp, $r0
+
+ move.d [$r0+TI_flags], $r10 ; current->work
+ and.d _TIF_WORK_MASK, $r10 ; is there any work to be done on return
+ bne _work_pending
+ nop
+ ba _Rexit
+ nop
+
+ ;; The system_call is called by a BREAK instruction, which works like
+ ;; an interrupt call but it stores the return PC in BRP instead of IRP.
+ ;; Since we dont really want to have two epilogues (one for system calls
+ ;; and one for interrupts) we push the contents of BRP instead of IRP in the
+ ;; system call prologue, to make it look like an ordinary interrupt on the
+ ;; stackframe.
+ ;;
+ ;; Since we can't have system calls inside interrupts, it should not matter
+ ;; that we don't stack IRP.
+ ;;
+ ;; In r9 we have the wanted syscall number. Arguments come in r10,r11,r12,r13,mof,srp
+ ;;
+ ;; This function looks on the _surface_ like spaghetti programming, but it's
+ ;; really designed so that the fast-path does not force cache-loading of non-used
+ ;; instructions. Only the non-common cases cause the outlined code to run..
+
+system_call:
+ ;; stack-frame similar to the irq heads, which is reversed in ret_from_sys_call
+ move $brp,[$sp=$sp-16]; instruction pointer and room for a fake SBFS frame
+ push $srp
+ push $dccr
+ push $mof
+ subq 14*4, $sp ; make room for r0-r13
+ movem $r13, [$sp] ; push r0-r13
+ push $r10 ; push orig_r10
+ clear.d [$sp=$sp-4] ; frametype == 0, normal stackframe
+
+ movs.w -ENOSYS, $r0
+ move.d $r0, [$sp+PT_r10] ; put the default return value in r10 in the frame
+
+ ;; check if this process is syscall-traced
+
+ movs.w -8192, $r0 ; THREAD_SIZE == 8192
+ and.d $sp, $r0
+
+ move.d [$r0+TI_flags], $r0
+ btstq TIF_SYSCALL_TRACE, $r0
+ bmi _syscall_trace_entry
+ nop
+
+_syscall_traced:
+
+ ;; check for sanity in the requested syscall number
+
+ cmpu.w NR_syscalls, $r9
+ bcc ret_from_sys_call
+ lslq 2, $r9 ; multiply by 4, in the delay slot
+
+ ;; as a bonus 7th parameter, we give the location on the stack
+ ;; of the register structure itself. some syscalls need this.
+
+ push $sp
+
+ ;; the parameter carrying registers r10, r11, r12 and 13 are intact.
+ ;; the fifth and sixth parameters (if any) was in mof and srp
+ ;; respectively, and we need to put them on the stack.
+
+ push $srp
+ push $mof
+
+ jsr [$r9+sys_call_table] ; actually do the system call
+ addq 3*4, $sp ; pop the mof, srp and regs parameters
+ move.d $r10, [$sp+PT_r10] ; save the return value
+
+ moveq 1, $r9 ; "parameter" to ret_from_sys_call to show it was a sys call
+
+ ;; fall through into ret_from_sys_call to return
+
+ret_from_sys_call:
+ ;; r9 is a parameter - if >=1 we came from a syscall, if 0, from an irq
+
+ ;; get the current task-struct pointer (see top for defs)
+
+ movs.w -8192, $r0 ; THREAD_SIZE == 8192
+ and.d $sp, $r0
+
+ di ; make sure need_resched and sigpending don't change
+ move.d [$r0+TI_flags],$r1
+ and.d _TIF_ALLWORK_MASK, $r1
+ bne _syscall_exit_work
+ nop
+
+_Rexit:
+ ;; this epilogue MUST match the prologues in multiple_interrupt, irq.h and ptregs.h
+ pop $r10 ; frametype
+ bne _RBFexit ; was not CRIS_FRAME_NORMAL, handle otherwise
+ addq 4, $sp ; skip orig_r10, in delayslot
+ movem [$sp+], $r13 ; registers r0-r13
+ pop $mof ; multiply overflow register
+ pop $dccr ; condition codes
+ pop $srp ; subroutine return pointer
+ ;; now we have a 4-word SBFS frame which we do not want to restore
+ ;; using RBF since it was not stacked with SBFS. instead we would like to
+ ;; just get the PC value to restart it with, and skip the rest of
+ ;; the frame.
+ ;; Also notice that it's important to use instructions here that
+ ;; keep the interrupts disabled (since we've already popped DCCR)
+ move [$sp=$sp+16], $p8; pop the SBFS frame from the sp
+ jmpu [$sp-16] ; return through the irp field in the sbfs frame
+
+_RBFexit:
+ movem [$sp+], $r13 ; registers r0-r13, in delay slot
+ pop $mof ; multiply overflow register
+ pop $dccr ; condition codes
+ pop $srp ; subroutine return pointer
+ rbf [$sp+] ; return by popping the CPU status
+
+ ;; We get here after doing a syscall if extra work might need to be done
+ ;; perform syscall exit tracing if needed
+
+_syscall_exit_work:
+ ;; $r0 contains current at this point and irq's are disabled
+
+ move.d [$r0+TI_flags], $r1
+ btstq TIF_SYSCALL_TRACE, $r1
+ bpl _work_pending
+ nop
+
+ ei
+
+ move.d $r9, $r1 ; preserve r9
+ jsr do_syscall_trace
+ move.d $r1, $r9
+
+ ba _resume_userspace
+ nop
+
+_work_pending:
+ move.d [$r0+TI_flags], $r1
+ btstq TIF_NEED_RESCHED, $r1
+ bpl _work_notifysig ; was neither trace nor sched, must be signal/notify
+ nop
+
+_work_resched:
+ move.d $r9, $r1 ; preserve r9
+ jsr schedule
+ move.d $r1, $r9
+ di
+
+ move.d [$r0+TI_flags], $r1
+ and.d _TIF_WORK_MASK, $r1; ignore the syscall trace counter
+ beq _Rexit
+ nop
+ btstq TIF_NEED_RESCHED, $r1
+ bmi _work_resched ; current->work.need_resched
+ nop
+
+_work_notifysig:
+ ;; deal with pending signals and notify-resume requests
+
+ move.d $r9, $r10 ; do_notify_resume syscall/irq param
+ move.d $sp, $r11 ; the regs param
+ move.d $r1, $r12 ; the thread_info_flags parameter
+ jsr do_notify_resume
+
+ ba _Rexit
+ nop
+
+ ;; We get here as a sidetrack when we've entered a syscall with the
+ ;; trace-bit set. We need to call do_syscall_trace and then continue
+ ;; with the call.
+
+_syscall_trace_entry:
+ ;; PT_r10 in the frame contains -ENOSYS as required, at this point
+
+ jsr do_syscall_trace
+
+ ;; now re-enter the syscall code to do the syscall itself
+ ;; we need to restore $r9 here to contain the wanted syscall, and
+ ;; the other parameter-bearing registers
+
+ move.d [$sp+PT_r9], $r9
+ move.d [$sp+PT_orig_r10], $r10 ; PT_r10 is already filled with -ENOSYS.
+ move.d [$sp+PT_r11], $r11
+ move.d [$sp+PT_r12], $r12
+ move.d [$sp+PT_r13], $r13
+ move [$sp+PT_mof], $mof
+ move [$sp+PT_srp], $srp
+
+ ba _syscall_traced
+ nop
+
+ ;; resume performs the actual task-switching, by switching stack pointers
+ ;; input arguments: r10 = prev, r11 = next, r12 = thread offset in task struct
+ ;; returns old current in r10
+ ;;
+ ;; TODO: see the i386 version. The switch_to which calls resume in our version
+ ;; could really be an inline asm of this.
+
+resume:
+ push $srp ; we keep the old/new PC on the stack
+ add.d $r12, $r10 ; r10 = current tasks tss
+ move $dccr, [$r10+THREAD_dccr]; save irq enable state
+ di
+
+ move $usp, [$r10+ THREAD_usp] ; save user-mode stackpointer
+
+ ;; See copy_thread for the reason why register R9 is saved.
+ subq 10*4, $sp
+ movem $r9, [$sp] ; save non-scratch registers and R9.
+
+ move.d $sp, [$r10+THREAD_ksp] ; save the kernel stack pointer for the old task
+ move.d $sp, $r10 ; return last running task in r10
+ and.d -8192, $r10 ; get thread_info from stackpointer
+ move.d [$r10+TI_task], $r10 ; get task
+ add.d $r12, $r11 ; find the new tasks tss
+ move.d [$r11+THREAD_ksp], $sp ; switch into the new stackframe by restoring kernel sp
+
+ movem [$sp+], $r9 ; restore non-scratch registers and R9.
+
+ move [$r11+THREAD_usp], $usp ; restore user-mode stackpointer
+
+ move [$r11+THREAD_dccr], $dccr ; restore irq enable status
+ jump [$sp+] ; restore PC
+
+ ;; This is the MMU bus fault handler.
+ ;; It needs to stack the CPU status and overall is different
+ ;; from the other interrupt handlers.
+
+mmu_bus_fault:
+ ;; For refills we try to do a quick page table lookup. If it is
+ ;; a real fault we let the mm subsystem handle it.
+
+ ;; the first longword in the sbfs frame was the interrupted PC
+ ;; which fits nicely with the "IRP" slot in pt_regs normally used to
+ ;; contain the return address. used by Oops to print kernel errors.
+ sbfs [$sp=$sp-16] ; push the internal CPU status
+ push $dccr
+ di
+ subq 2*4, $sp
+ movem $r1, [$sp]
+ move.d [R_MMU_CAUSE], $r1
+ ;; ETRAX 100LX TR89 bugfix: if the second half of an unaligned
+ ;; write causes a MMU-fault, it will not be restarted correctly.
+ ;; This could happen if a write crosses a page-boundary and the
+ ;; second page is not yet COW'ed or even loaded. The workaround
+ ;; is to clear the unaligned bit in the CPU status record, so
+ ;; that the CPU will rerun both the first and second halves of
+ ;; the instruction. This will not have any sideeffects unless
+ ;; the first half goes to any device or memory that can't be
+ ;; written twice, and which is mapped through the MMU.
+ ;;
+ ;; We only need to do this for writes.
+ btstq 8, $r1 ; Write access?
+ bpl 1f
+ nop
+ move.d [$sp+16], $r0 ; Clear unaligned bit in csrinstr
+ and.d ~(1<<5), $r0
+ move.d $r0, [$sp+16]
+1: btstq 12, $r1 ; Refill?
+ bpl 2f
+ lsrq 24, $r1 ; Get PGD index (bit 24-31)
+ move.d [current_pgd], $r0 ; PGD for the current process
+ move.d [$r0+$r1.d], $r0 ; Get PMD
+ beq 2f
+ nop
+ and.w PAGE_MASK, $r0 ; Remove PMD flags
+ move.d [R_MMU_CAUSE], $r1
+ lsrq PAGE_SHIFT, $r1
+ and.d 0x7ff, $r1 ; Get PTE index into PGD (bit 13-23)
+ move.d [$r0+$r1.d], $r1 ; Get PTE
+ beq 2f
+ nop
+ ;; Store in TLB
+ move.d $r1, [R_TLB_LO]
+ ;; Return
+ movem [$sp+], $r1
+ pop $dccr
+ rbf [$sp+] ; return by popping the CPU status
+
+2: ; PMD or PTE missing, let the mm subsystem fix it up.
+ movem [$sp+], $r1
+ pop $dccr
+
+ ; Ok, not that easy, pass it on to the mm subsystem
+ ; The MMU status record is now on the stack
+ push $srp ; make a stackframe similar to pt_regs
+ push $dccr
+ push $mof
+ di
+ subq 14*4, $sp
+ movem $r13, [$sp]
+ push $r10 ; dummy orig_r10
+ moveq 1, $r10
+ push $r10 ; frametype == 1, BUSFAULT frame type
+
+ move.d $sp, $r10 ; pt_regs argument to handle_mmu_bus_fault
+
+ jsr handle_mmu_bus_fault ; in arch/cris/arch-v10/mm/fault.c
+
+ ;; now we need to return through the normal path, we cannot just
+ ;; do the RBFexit since we might have killed off the running
+ ;; process due to a SEGV, scheduled due to a page blocking or
+ ;; whatever.
+
+ moveq 0, $r9 ; busfault is equivalent to an irq
+
+ ba ret_from_intr
+ nop
+
+ ;; special handlers for breakpoint and NMI
+hwbreakpoint:
+ push $dccr
+ di
+ push $r10
+ push $r11
+ move.d [hw_bp_trig_ptr],$r10
+ move $brp,$r11
+ move.d $r11,[$r10+]
+ move.d $r10,[hw_bp_trig_ptr]
+1: pop $r11
+ pop $r10
+ pop $dccr
+ retb
+ nop
+
+IRQ1_interrupt:
+ ;; this prologue MUST match the one in irq.h and the struct in ptregs.h!!!
+ move $brp,[$sp=$sp-16]; instruction pointer and room for a fake SBFS frame
+ push $srp
+ push $dccr
+ push $mof
+ di
+ subq 14*4, $sp
+ movem $r13, [$sp]
+ push $r10 ; push orig_r10
+ clear.d [$sp=$sp-4] ; frametype == 0, normal frame
+
+ ;; If there is a glitch on the NMI pin shorter than ~100ns
+ ;; (i.e. non-active by the time we get here) then the nmi_pin bit
+ ;; in R_IRQ_MASK0_RD will already be cleared. The watchdog_nmi bit
+ ;; is cleared by us however (when feeding the watchdog), which is why
+ ;; we use that bit to determine what brought us here.
+
+ move.d [R_IRQ_MASK0_RD], $r1 ; External NMI or watchdog?
+ and.d (1<<30), $r1
+ bne wdog
+ move.d $sp, $r10
+ jsr handle_nmi
+ setf m ; Enable NMI again
+ ba _Rexit ; Return the standard way
+ nop
+wdog:
+#if defined(CONFIG_ETRAX_WATCHDOG)
+;; Check if we're waiting for reset to happen, as signalled by
+;; hard_reset_now setting cause_of_death to a magic value. If so, just
+;; get stuck until reset happens.
+ .comm cause_of_death, 4 ;; Don't declare this anywhere.
+ move.d [cause_of_death], $r10
+ cmp.d 0xbedead, $r10
+_killed_by_death:
+ beq _killed_by_death
+ nop
+
+;; We'll see this in ksymoops dumps.
+Watchdog_bite:
+
+#ifdef CONFIG_ETRAX_WATCHDOG_NICE_DOGGY
+ ;; We just restart the watchdog here to be sure we dont get
+ ;; hit while printing the watchdogmsg below
+ ;; This restart is compatible with the rest of the C-code, so
+ ;; the C-code can keep restarting the watchdog after this point.
+ ;; The non-NICE_DOGGY code below though, disables the possibility
+ ;; to restart since it changes the watchdog key, to avoid any
+ ;; buggy loops etc. keeping the watchdog alive after this.
+ jsr reset_watchdog
+#else
+
+;; We need to extend the 3.3ms after the NMI at watchdog bite, so we have
+;; time for an oops-dump over a 115k2 serial wire. Another 100ms should do.
+
+;; Change the watchdog key to an arbitrary 3-bit value and restart the
+;; watchdog.
+#define WD_INIT 2
+ moveq IO_FIELD (R_WATCHDOG, key, WD_INIT), $r10
+ move.d R_WATCHDOG, $r11
+
+ move.d $r10, [$r11]
+ moveq IO_FIELD (R_WATCHDOG, key, \
+ IO_EXTRACT (R_WATCHDOG, key, \
+ IO_MASK (R_WATCHDOG, key)) \
+ ^ WD_INIT) \
+ | IO_STATE (R_WATCHDOG, enable, start), $r10
+ move.d $r10, [$r11]
+
+#endif
+
+;; Note that we don't do "setf m" here (or after two necessary NOPs),
+;; since *not* doing that saves us from re-entrancy checks. We don't want
+;; to get here again due to possible subsequent NMIs; we want the watchdog
+;; to reset us.
+
+ move.d _watchdogmsg,$r10
+ jsr printk
+
+ move.d $sp, $r10
+ jsr watchdog_bite_hook
+
+;; This nop is here so we see the "Watchdog_bite" label in ksymoops dumps
+;; rather than "spurious_interrupt".
+ nop
+;; At this point we drop down into spurious_interrupt, which will do a
+;; hard reset.
+
+ .section .rodata,"a"
+_watchdogmsg:
+ .ascii "Oops: bitten by watchdog\n\0"
+ .previous
+
+#endif /* CONFIG_ETRAX_WATCHDOG */
+
+spurious_interrupt:
+ di
+ jump hard_reset_now
+
+ ;; this handles the case when multiple interrupts arrive at the same time
+ ;; we jump to the first set interrupt bit in a priority fashion
+ ;; the hardware will call the unserved interrupts after the handler finishes
+
+multiple_interrupt:
+ ;; this prologue MUST match the one in irq.h and the struct in ptregs.h!!!
+ move $irp,[$sp=$sp-16]; instruction pointer and room for a fake SBFS frame
+ push $srp
+ push $dccr
+ push $mof
+ di
+ subq 14*4, $sp
+ movem $r13, [$sp]
+ push $r10 ; push orig_r10
+ clear.d [$sp=$sp-4] ; frametype == 0, normal frame
+
+ move.d $sp, $r10
+ jsr do_multiple_IRQ
+
+ jump ret_from_intr
+
+do_sigtrap:
+ ;;
+ ;; SIGTRAP the process that executed the break instruction.
+ ;; Make a frame that Rexit in entry.S expects.
+ ;;
+ move $brp, [$sp=$sp-16] ; Push BRP while faking a cpu status record.
+ push $srp ; Push subroutine return pointer.
+ push $dccr ; Push condition codes.
+ push $mof ; Push multiply overflow reg.
+ di ; Need to disable irq's at this point.
+ subq 14*4, $sp ; Make room for r0-r13.
+ movem $r13, [$sp] ; Push the r0-r13 registers.
+ push $r10 ; Push orig_r10.
+ clear.d [$sp=$sp-4] ; Frametype - this is a normal stackframe.
+
+ movs.w -8192,$r9 ; THREAD_SIZE == 8192
+ and.d $sp, $r9
+ move.d [$r9+TI_task], $r10
+ move.d [$r10+TASK_pid], $r10 ; current->pid as arg1.
+ moveq 5, $r11 ; SIGTRAP as arg2.
+ jsr sys_kill
+ jump ret_from_intr ; Use the return routine for interrupts.
+
+gdb_handle_breakpoint:
+ push $dccr
+ push $r0
+#ifdef CONFIG_ETRAX_KGDB
+ move $dccr, $r0 ; U-flag not affected by previous insns.
+ btstq 8, $r0 ; Test the U-flag.
+ bmi _ugdb_handle_breakpoint ; Go to user mode debugging.
+ nop ; Empty delay slot (cannot pop r0 here).
+ pop $r0 ; Restore r0.
+ ba kgdb_handle_breakpoint ; Go to kernel debugging.
+ pop $dccr ; Restore dccr in delay slot.
+#endif
+
+_ugdb_handle_breakpoint:
+ move $brp, $r0 ; Use r0 temporarily for calculation.
+ subq 2, $r0 ; Set to address of previous instruction.
+ move $r0, $brp
+ pop $r0 ; Restore r0.
+ ba do_sigtrap ; SIGTRAP the offending process.
+ pop $dccr ; Restore dccr in delay slot.
+
+ .data
+
+hw_bp_trigs:
+ .space 64*4
+hw_bp_trig_ptr:
+ .dword hw_bp_trigs
+
+ .section .rodata,"a"
+sys_call_table:
+ .long sys_restart_syscall /* 0 - old "setup()" system call, used for restarting */
+ .long sys_exit
+ .long sys_fork
+ .long sys_read
+ .long sys_write
+ .long sys_open /* 5 */
+ .long sys_close
+ .long sys_waitpid
+ .long sys_creat
+ .long sys_link
+ .long sys_unlink /* 10 */
+ .long sys_execve
+ .long sys_chdir
+ .long sys_time
+ .long sys_mknod
+ .long sys_chmod /* 15 */
+ .long sys_lchown16
+ .long sys_ni_syscall /* old break syscall holder */
+ .long sys_stat
+ .long sys_lseek
+ .long sys_getpid /* 20 */
+ .long sys_mount
+ .long sys_oldumount
+ .long sys_setuid16
+ .long sys_getuid16
+ .long sys_stime /* 25 */
+ .long sys_ptrace
+ .long sys_alarm
+ .long sys_fstat
+ .long sys_pause
+ .long sys_utime /* 30 */
+ .long sys_ni_syscall /* old stty syscall holder */
+ .long sys_ni_syscall /* old gtty syscall holder */
+ .long sys_access
+ .long sys_nice
+ .long sys_ni_syscall /* 35 old ftime syscall holder */
+ .long sys_sync
+ .long sys_kill
+ .long sys_rename
+ .long sys_mkdir
+ .long sys_rmdir /* 40 */
+ .long sys_dup
+ .long sys_pipe
+ .long sys_times
+ .long sys_ni_syscall /* old prof syscall holder */
+ .long sys_brk /* 45 */
+ .long sys_setgid16
+ .long sys_getgid16
+ .long sys_signal
+ .long sys_geteuid16
+ .long sys_getegid16 /* 50 */
+ .long sys_acct
+ .long sys_umount /* recycled never used phys( */
+ .long sys_ni_syscall /* old lock syscall holder */
+ .long sys_ioctl
+ .long sys_fcntl /* 55 */
+ .long sys_ni_syscall /* old mpx syscall holder */
+ .long sys_setpgid
+ .long sys_ni_syscall /* old ulimit syscall holder */
+ .long sys_ni_syscall /* old sys_olduname holder */
+ .long sys_umask /* 60 */
+ .long sys_chroot
+ .long sys_ustat
+ .long sys_dup2
+ .long sys_getppid
+ .long sys_getpgrp /* 65 */
+ .long sys_setsid
+ .long sys_sigaction
+ .long sys_sgetmask
+ .long sys_ssetmask
+ .long sys_setreuid16 /* 70 */
+ .long sys_setregid16
+ .long sys_sigsuspend
+ .long sys_sigpending
+ .long sys_sethostname
+ .long sys_setrlimit /* 75 */
+ .long sys_old_getrlimit
+ .long sys_getrusage
+ .long sys_gettimeofday
+ .long sys_settimeofday
+ .long sys_getgroups16 /* 80 */
+ .long sys_setgroups16
+ .long sys_select /* was old_select in Linux/E100 */
+ .long sys_symlink
+ .long sys_lstat
+ .long sys_readlink /* 85 */
+ .long sys_uselib
+ .long sys_swapon
+ .long sys_reboot
+ .long sys_old_readdir
+ .long sys_old_mmap /* 90 */
+ .long sys_munmap
+ .long sys_truncate
+ .long sys_ftruncate
+ .long sys_fchmod
+ .long sys_fchown16 /* 95 */
+ .long sys_getpriority
+ .long sys_setpriority
+ .long sys_ni_syscall /* old profil syscall holder */
+ .long sys_statfs
+ .long sys_fstatfs /* 100 */
+ .long sys_ni_syscall /* sys_ioperm in i386 */
+ .long sys_socketcall
+ .long sys_syslog
+ .long sys_setitimer
+ .long sys_getitimer /* 105 */
+ .long sys_newstat
+ .long sys_newlstat
+ .long sys_newfstat
+ .long sys_ni_syscall /* old sys_uname holder */
+ .long sys_ni_syscall /* 110 */ /* sys_iopl in i386 */
+ .long sys_vhangup
+ .long sys_ni_syscall /* old "idle" system call */
+ .long sys_ni_syscall /* vm86old in i386 */
+ .long sys_wait4
+ .long sys_swapoff /* 115 */
+ .long sys_sysinfo
+ .long sys_ipc
+ .long sys_fsync
+ .long sys_sigreturn
+ .long sys_clone /* 120 */
+ .long sys_setdomainname
+ .long sys_newuname
+ .long sys_ni_syscall /* sys_modify_ldt */
+ .long sys_adjtimex
+ .long sys_mprotect /* 125 */
+ .long sys_sigprocmask
+ .long sys_ni_syscall /* old "create_module" */
+ .long sys_init_module
+ .long sys_delete_module
+ .long sys_ni_syscall /* 130: old "get_kernel_syms" */
+ .long sys_quotactl
+ .long sys_getpgid
+ .long sys_fchdir
+ .long sys_bdflush
+ .long sys_sysfs /* 135 */
+ .long sys_personality
+ .long sys_ni_syscall /* for afs_syscall */
+ .long sys_setfsuid16
+ .long sys_setfsgid16
+ .long sys_llseek /* 140 */
+ .long sys_getdents
+ .long sys_select
+ .long sys_flock
+ .long sys_msync
+ .long sys_readv /* 145 */
+ .long sys_writev
+ .long sys_getsid
+ .long sys_fdatasync
+ .long sys_sysctl
+ .long sys_mlock /* 150 */
+ .long sys_munlock
+ .long sys_mlockall
+ .long sys_munlockall
+ .long sys_sched_setparam
+ .long sys_sched_getparam /* 155 */
+ .long sys_sched_setscheduler
+ .long sys_sched_getscheduler
+ .long sys_sched_yield
+ .long sys_sched_get_priority_max
+ .long sys_sched_get_priority_min /* 160 */
+ .long sys_sched_rr_get_interval
+ .long sys_nanosleep
+ .long sys_mremap
+ .long sys_setresuid16
+ .long sys_getresuid16 /* 165 */
+ .long sys_ni_syscall /* sys_vm86 */
+ .long sys_ni_syscall /* Old sys_query_module */
+ .long sys_poll
+ .long sys_ni_syscall /* old nfsservctl */
+ .long sys_setresgid16 /* 170 */
+ .long sys_getresgid16
+ .long sys_prctl
+ .long sys_rt_sigreturn
+ .long sys_rt_sigaction
+ .long sys_rt_sigprocmask /* 175 */
+ .long sys_rt_sigpending
+ .long sys_rt_sigtimedwait
+ .long sys_rt_sigqueueinfo
+ .long sys_rt_sigsuspend
+ .long sys_pread64 /* 180 */
+ .long sys_pwrite64
+ .long sys_chown16
+ .long sys_getcwd
+ .long sys_capget
+ .long sys_capset /* 185 */
+ .long sys_sigaltstack
+ .long sys_sendfile
+ .long sys_ni_syscall /* streams1 */
+ .long sys_ni_syscall /* streams2 */
+ .long sys_vfork /* 190 */
+ .long sys_getrlimit
+ .long sys_mmap2 /* mmap_pgoff */
+ .long sys_truncate64
+ .long sys_ftruncate64
+ .long sys_stat64 /* 195 */
+ .long sys_lstat64
+ .long sys_fstat64
+ .long sys_lchown
+ .long sys_getuid
+ .long sys_getgid /* 200 */
+ .long sys_geteuid
+ .long sys_getegid
+ .long sys_setreuid
+ .long sys_setregid
+ .long sys_getgroups /* 205 */
+ .long sys_setgroups
+ .long sys_fchown
+ .long sys_setresuid
+ .long sys_getresuid
+ .long sys_setresgid /* 210 */
+ .long sys_getresgid
+ .long sys_chown
+ .long sys_setuid
+ .long sys_setgid
+ .long sys_setfsuid /* 215 */
+ .long sys_setfsgid
+ .long sys_pivot_root
+ .long sys_mincore
+ .long sys_madvise
+ .long sys_getdents64 /* 220 */
+ .long sys_fcntl64
+ .long sys_ni_syscall /* reserved for TUX */
+ .long sys_ni_syscall
+ .long sys_gettid
+ .long sys_readahead /* 225 */
+ .long sys_setxattr
+ .long sys_lsetxattr
+ .long sys_fsetxattr
+ .long sys_getxattr
+ .long sys_lgetxattr /* 230 */
+ .long sys_fgetxattr
+ .long sys_listxattr
+ .long sys_llistxattr
+ .long sys_flistxattr
+ .long sys_removexattr /* 235 */
+ .long sys_lremovexattr
+ .long sys_fremovexattr
+ .long sys_tkill
+ .long sys_sendfile64
+ .long sys_futex /* 240 */
+ .long sys_sched_setaffinity
+ .long sys_sched_getaffinity
+ .long sys_ni_syscall /* sys_set_thread_area */
+ .long sys_ni_syscall /* sys_get_thread_area */
+ .long sys_io_setup /* 245 */
+ .long sys_io_destroy
+ .long sys_io_getevents
+ .long sys_io_submit
+ .long sys_io_cancel
+ .long sys_fadvise64 /* 250 */
+ .long sys_ni_syscall
+ .long sys_exit_group
+ .long sys_lookup_dcookie
+ .long sys_epoll_create
+ .long sys_epoll_ctl /* 255 */
+ .long sys_epoll_wait
+ .long sys_remap_file_pages
+ .long sys_set_tid_address
+ .long sys_timer_create
+ .long sys_timer_settime /* 260 */
+ .long sys_timer_gettime
+ .long sys_timer_getoverrun
+ .long sys_timer_delete
+ .long sys_clock_settime
+ .long sys_clock_gettime /* 265 */
+ .long sys_clock_getres
+ .long sys_clock_nanosleep
+ .long sys_statfs64
+ .long sys_fstatfs64
+ .long sys_tgkill /* 270 */
+ .long sys_utimes
+ .long sys_fadvise64_64
+ .long sys_ni_syscall /* sys_vserver */
+ .long sys_ni_syscall /* sys_mbind */
+ .long sys_ni_syscall /* 275 sys_get_mempolicy */
+ .long sys_ni_syscall /* sys_set_mempolicy */
+ .long sys_mq_open
+ .long sys_mq_unlink
+ .long sys_mq_timedsend
+ .long sys_mq_timedreceive /* 280 */
+ .long sys_mq_notify
+ .long sys_mq_getsetattr
+ .long sys_ni_syscall
+ .long sys_waitid
+ .long sys_ni_syscall /* 285 */ /* available */
+ .long sys_add_key
+ .long sys_request_key
+ .long sys_keyctl
+ .long sys_ioprio_set
+ .long sys_ioprio_get /* 290 */
+ .long sys_inotify_init
+ .long sys_inotify_add_watch
+ .long sys_inotify_rm_watch
+ .long sys_migrate_pages
+ .long sys_openat /* 295 */
+ .long sys_mkdirat
+ .long sys_mknodat
+ .long sys_fchownat
+ .long sys_futimesat
+ .long sys_fstatat64 /* 300 */
+ .long sys_unlinkat
+ .long sys_renameat
+ .long sys_linkat
+ .long sys_symlinkat
+ .long sys_readlinkat /* 305 */
+ .long sys_fchmodat
+ .long sys_faccessat
+ .long sys_pselect6
+ .long sys_ppoll
+ .long sys_unshare /* 310 */
+ .long sys_set_robust_list
+ .long sys_get_robust_list
+ .long sys_splice
+ .long sys_sync_file_range
+ .long sys_tee /* 315 */
+ .long sys_vmsplice
+ .long sys_move_pages
+ .long sys_getcpu
+ .long sys_epoll_pwait
+ .long sys_utimensat /* 320 */
+ .long sys_signalfd
+ .long sys_timerfd_create
+ .long sys_eventfd
+ .long sys_fallocate
+ .long sys_timerfd_settime /* 325 */
+ .long sys_timerfd_gettime
+ .long sys_signalfd4
+ .long sys_eventfd2
+ .long sys_epoll_create1
+ .long sys_dup3 /* 330 */
+ .long sys_pipe2
+ .long sys_inotify_init1
+ .long sys_preadv
+ .long sys_pwritev
+ .long sys_setns /* 335 */
+ .long sys_name_to_handle_at
+ .long sys_open_by_handle_at
+ .long sys_rt_tgsigqueueinfo
+ .long sys_perf_event_open
+ .long sys_recvmmsg /* 340 */
+ .long sys_accept4
+ .long sys_fanotify_init
+ .long sys_fanotify_mark
+ .long sys_prlimit64
+ .long sys_clock_adjtime /* 345 */
+ .long sys_syncfs
+ .long sys_sendmmsg
+ .long sys_process_vm_readv
+ .long sys_process_vm_writev
+ .long sys_kcmp /* 350 */
+ .long sys_finit_module
+
+ /*
+ * NOTE!! This doesn't have to be exact - we just have
+ * to make sure we have _enough_ of the "sys_ni_syscall"
+ * entries. Don't panic if you notice that this hasn't
+ * been shrunk every time we add a new system call.
+ */
+
+ .rept NR_syscalls-(.-sys_call_table)/4
+ .long sys_ni_syscall
+ .endr
+