diff options
Diffstat (limited to 'arch/cris/arch-v10/kernel/entry.S')
| -rw-r--r-- | arch/cris/arch-v10/kernel/entry.S | 969 |
1 files changed, 969 insertions, 0 deletions
diff --git a/arch/cris/arch-v10/kernel/entry.S b/arch/cris/arch-v10/kernel/entry.S new file mode 100644 index 000000000..81570fcd0 --- /dev/null +++ b/arch/cris/arch-v10/kernel/entry.S @@ -0,0 +1,969 @@ +/* + * linux/arch/cris/entry.S + * + * Copyright (C) 2000, 2001, 2002 Axis Communications AB + * + * Authors: Bjorn Wesen (bjornw@axis.com) + */ + +/* + * entry.S contains the system-call and fault low-level handling routines. + * + * NOTE: This code handles signal-recognition, which happens every time + * after a timer-interrupt and after each system call. + * + * Stack layout in 'ret_from_system_call': + * ptrace needs to have all regs on the stack. + * if the order here is changed, it needs to be + * updated in fork.c:copy_process, signal.c:do_signal, + * ptrace.c and ptrace.h + * + */ + +#include <linux/linkage.h> +#include <linux/sys.h> +#include <asm/unistd.h> +#include <arch/sv_addr_ag.h> +#include <asm/errno.h> +#include <asm/thread_info.h> +#include <asm/asm-offsets.h> +#include <asm/page.h> +#include <asm/pgtable.h> + + ;; functions exported from this file + + .globl system_call + .globl ret_from_intr + .globl ret_from_fork + .globl ret_from_kernel_thread + .globl resume + .globl multiple_interrupt + .globl hwbreakpoint + .globl IRQ1_interrupt + .globl spurious_interrupt + .globl hw_bp_trigs + .globl mmu_bus_fault + .globl do_sigtrap + .globl gdb_handle_breakpoint + .globl sys_call_table + + ;; below are various parts of system_call which are not in the fast-path + +#ifdef CONFIG_PREEMPT + ; Check if preemptive kernel scheduling should be done +_resume_kernel: + di + ; Load current task struct + movs.w -8192, $r0 ; THREAD_SIZE = 8192 + and.d $sp, $r0 + move.d [$r0+TI_preempt_count], $r10 ; Preemption disabled? + bne _Rexit + nop +_need_resched: + move.d [$r0+TI_flags], $r10 + btstq TIF_NEED_RESCHED, $r10 ; Check if need_resched is set + bpl _Rexit + nop + ; Ok, lets's do some preemptive kernel scheduling + jsr preempt_schedule_irq + ; Load new task struct + movs.w -8192, $r0 ; THREAD_SIZE = 8192 + and.d $sp, $r0 + ; One more time (with new task) + ba _need_resched + nop +#else +#define _resume_kernel _Rexit +#endif + + ; Called at exit from fork. schedule_tail must be called to drop + ; spinlock if CONFIG_PREEMPT +ret_from_fork: + jsr schedule_tail + ba ret_from_sys_call + nop + +ret_from_kernel_thread: + jsr schedule_tail + move.d $r2, $r10 ; argument is here + jsr $r1 ; call the payload + moveq 0, $r9 ; no syscall restarts, TYVM... + ba ret_from_sys_call + +ret_from_intr: + ;; check for resched if preemptive kernel or if we're going back to user-mode + ;; this test matches the user_regs(regs) macro + ;; we cannot simply test $dccr, because that does not necessarily + ;; reflect what mode we'll return into. + + move.d [$sp + PT_dccr], $r0; regs->dccr + btstq 8, $r0 ; U-flag + bpl _resume_kernel + ; Note that di below is in delay slot + +_resume_userspace: + di ; so need_resched and sigpending don't change + + movs.w -8192, $r0 ; THREAD_SIZE == 8192 + and.d $sp, $r0 + + move.d [$r0+TI_flags], $r10 ; current->work + and.d _TIF_WORK_MASK, $r10 ; is there any work to be done on return + bne _work_pending + nop + ba _Rexit + nop + + ;; The system_call is called by a BREAK instruction, which works like + ;; an interrupt call but it stores the return PC in BRP instead of IRP. + ;; Since we dont really want to have two epilogues (one for system calls + ;; and one for interrupts) we push the contents of BRP instead of IRP in the + ;; system call prologue, to make it look like an ordinary interrupt on the + ;; stackframe. + ;; + ;; Since we can't have system calls inside interrupts, it should not matter + ;; that we don't stack IRP. + ;; + ;; In r9 we have the wanted syscall number. Arguments come in r10,r11,r12,r13,mof,srp + ;; + ;; This function looks on the _surface_ like spaghetti programming, but it's + ;; really designed so that the fast-path does not force cache-loading of non-used + ;; instructions. Only the non-common cases cause the outlined code to run.. + +system_call: + ;; stack-frame similar to the irq heads, which is reversed in ret_from_sys_call + move $brp,[$sp=$sp-16]; instruction pointer and room for a fake SBFS frame + push $srp + push $dccr + push $mof + subq 14*4, $sp ; make room for r0-r13 + movem $r13, [$sp] ; push r0-r13 + push $r10 ; push orig_r10 + clear.d [$sp=$sp-4] ; frametype == 0, normal stackframe + + movs.w -ENOSYS, $r0 + move.d $r0, [$sp+PT_r10] ; put the default return value in r10 in the frame + + ;; check if this process is syscall-traced + + movs.w -8192, $r0 ; THREAD_SIZE == 8192 + and.d $sp, $r0 + + move.d [$r0+TI_flags], $r0 + btstq TIF_SYSCALL_TRACE, $r0 + bmi _syscall_trace_entry + nop + +_syscall_traced: + + ;; check for sanity in the requested syscall number + + cmpu.w NR_syscalls, $r9 + bcc ret_from_sys_call + lslq 2, $r9 ; multiply by 4, in the delay slot + + ;; as a bonus 7th parameter, we give the location on the stack + ;; of the register structure itself. some syscalls need this. + + push $sp + + ;; the parameter carrying registers r10, r11, r12 and 13 are intact. + ;; the fifth and sixth parameters (if any) was in mof and srp + ;; respectively, and we need to put them on the stack. + + push $srp + push $mof + + jsr [$r9+sys_call_table] ; actually do the system call + addq 3*4, $sp ; pop the mof, srp and regs parameters + move.d $r10, [$sp+PT_r10] ; save the return value + + moveq 1, $r9 ; "parameter" to ret_from_sys_call to show it was a sys call + + ;; fall through into ret_from_sys_call to return + +ret_from_sys_call: + ;; r9 is a parameter - if >=1 we came from a syscall, if 0, from an irq + + ;; get the current task-struct pointer (see top for defs) + + movs.w -8192, $r0 ; THREAD_SIZE == 8192 + and.d $sp, $r0 + + di ; make sure need_resched and sigpending don't change + move.d [$r0+TI_flags],$r1 + and.d _TIF_ALLWORK_MASK, $r1 + bne _syscall_exit_work + nop + +_Rexit: + ;; this epilogue MUST match the prologues in multiple_interrupt, irq.h and ptregs.h + pop $r10 ; frametype + bne _RBFexit ; was not CRIS_FRAME_NORMAL, handle otherwise + addq 4, $sp ; skip orig_r10, in delayslot + movem [$sp+], $r13 ; registers r0-r13 + pop $mof ; multiply overflow register + pop $dccr ; condition codes + pop $srp ; subroutine return pointer + ;; now we have a 4-word SBFS frame which we do not want to restore + ;; using RBF since it was not stacked with SBFS. instead we would like to + ;; just get the PC value to restart it with, and skip the rest of + ;; the frame. + ;; Also notice that it's important to use instructions here that + ;; keep the interrupts disabled (since we've already popped DCCR) + move [$sp=$sp+16], $p8; pop the SBFS frame from the sp + jmpu [$sp-16] ; return through the irp field in the sbfs frame + +_RBFexit: + movem [$sp+], $r13 ; registers r0-r13, in delay slot + pop $mof ; multiply overflow register + pop $dccr ; condition codes + pop $srp ; subroutine return pointer + rbf [$sp+] ; return by popping the CPU status + + ;; We get here after doing a syscall if extra work might need to be done + ;; perform syscall exit tracing if needed + +_syscall_exit_work: + ;; $r0 contains current at this point and irq's are disabled + + move.d [$r0+TI_flags], $r1 + btstq TIF_SYSCALL_TRACE, $r1 + bpl _work_pending + nop + + ei + + move.d $r9, $r1 ; preserve r9 + jsr do_syscall_trace + move.d $r1, $r9 + + ba _resume_userspace + nop + +_work_pending: + move.d [$r0+TI_flags], $r1 + btstq TIF_NEED_RESCHED, $r1 + bpl _work_notifysig ; was neither trace nor sched, must be signal/notify + nop + +_work_resched: + move.d $r9, $r1 ; preserve r9 + jsr schedule + move.d $r1, $r9 + di + + move.d [$r0+TI_flags], $r1 + and.d _TIF_WORK_MASK, $r1; ignore the syscall trace counter + beq _Rexit + nop + btstq TIF_NEED_RESCHED, $r1 + bmi _work_resched ; current->work.need_resched + nop + +_work_notifysig: + ;; deal with pending signals and notify-resume requests + + move.d $r9, $r10 ; do_notify_resume syscall/irq param + move.d $sp, $r11 ; the regs param + move.d $r1, $r12 ; the thread_info_flags parameter + jsr do_notify_resume + + ba _Rexit + nop + + ;; We get here as a sidetrack when we've entered a syscall with the + ;; trace-bit set. We need to call do_syscall_trace and then continue + ;; with the call. + +_syscall_trace_entry: + ;; PT_r10 in the frame contains -ENOSYS as required, at this point + + jsr do_syscall_trace + + ;; now re-enter the syscall code to do the syscall itself + ;; we need to restore $r9 here to contain the wanted syscall, and + ;; the other parameter-bearing registers + + move.d [$sp+PT_r9], $r9 + move.d [$sp+PT_orig_r10], $r10 ; PT_r10 is already filled with -ENOSYS. + move.d [$sp+PT_r11], $r11 + move.d [$sp+PT_r12], $r12 + move.d [$sp+PT_r13], $r13 + move [$sp+PT_mof], $mof + move [$sp+PT_srp], $srp + + ba _syscall_traced + nop + + ;; resume performs the actual task-switching, by switching stack pointers + ;; input arguments: r10 = prev, r11 = next, r12 = thread offset in task struct + ;; returns old current in r10 + ;; + ;; TODO: see the i386 version. The switch_to which calls resume in our version + ;; could really be an inline asm of this. + +resume: + push $srp ; we keep the old/new PC on the stack + add.d $r12, $r10 ; r10 = current tasks tss + move $dccr, [$r10+THREAD_dccr]; save irq enable state + di + + move $usp, [$r10+ THREAD_usp] ; save user-mode stackpointer + + ;; See copy_thread for the reason why register R9 is saved. + subq 10*4, $sp + movem $r9, [$sp] ; save non-scratch registers and R9. + + move.d $sp, [$r10+THREAD_ksp] ; save the kernel stack pointer for the old task + move.d $sp, $r10 ; return last running task in r10 + and.d -8192, $r10 ; get thread_info from stackpointer + move.d [$r10+TI_task], $r10 ; get task + add.d $r12, $r11 ; find the new tasks tss + move.d [$r11+THREAD_ksp], $sp ; switch into the new stackframe by restoring kernel sp + + movem [$sp+], $r9 ; restore non-scratch registers and R9. + + move [$r11+THREAD_usp], $usp ; restore user-mode stackpointer + + move [$r11+THREAD_dccr], $dccr ; restore irq enable status + jump [$sp+] ; restore PC + + ;; This is the MMU bus fault handler. + ;; It needs to stack the CPU status and overall is different + ;; from the other interrupt handlers. + +mmu_bus_fault: + ;; For refills we try to do a quick page table lookup. If it is + ;; a real fault we let the mm subsystem handle it. + + ;; the first longword in the sbfs frame was the interrupted PC + ;; which fits nicely with the "IRP" slot in pt_regs normally used to + ;; contain the return address. used by Oops to print kernel errors. + sbfs [$sp=$sp-16] ; push the internal CPU status + push $dccr + di + subq 2*4, $sp + movem $r1, [$sp] + move.d [R_MMU_CAUSE], $r1 + ;; ETRAX 100LX TR89 bugfix: if the second half of an unaligned + ;; write causes a MMU-fault, it will not be restarted correctly. + ;; This could happen if a write crosses a page-boundary and the + ;; second page is not yet COW'ed or even loaded. The workaround + ;; is to clear the unaligned bit in the CPU status record, so + ;; that the CPU will rerun both the first and second halves of + ;; the instruction. This will not have any sideeffects unless + ;; the first half goes to any device or memory that can't be + ;; written twice, and which is mapped through the MMU. + ;; + ;; We only need to do this for writes. + btstq 8, $r1 ; Write access? + bpl 1f + nop + move.d [$sp+16], $r0 ; Clear unaligned bit in csrinstr + and.d ~(1<<5), $r0 + move.d $r0, [$sp+16] +1: btstq 12, $r1 ; Refill? + bpl 2f + lsrq 24, $r1 ; Get PGD index (bit 24-31) + move.d [current_pgd], $r0 ; PGD for the current process + move.d [$r0+$r1.d], $r0 ; Get PMD + beq 2f + nop + and.w PAGE_MASK, $r0 ; Remove PMD flags + move.d [R_MMU_CAUSE], $r1 + lsrq PAGE_SHIFT, $r1 + and.d 0x7ff, $r1 ; Get PTE index into PGD (bit 13-23) + move.d [$r0+$r1.d], $r1 ; Get PTE + beq 2f + nop + ;; Store in TLB + move.d $r1, [R_TLB_LO] + ;; Return + movem [$sp+], $r1 + pop $dccr + rbf [$sp+] ; return by popping the CPU status + +2: ; PMD or PTE missing, let the mm subsystem fix it up. + movem [$sp+], $r1 + pop $dccr + + ; Ok, not that easy, pass it on to the mm subsystem + ; The MMU status record is now on the stack + push $srp ; make a stackframe similar to pt_regs + push $dccr + push $mof + di + subq 14*4, $sp + movem $r13, [$sp] + push $r10 ; dummy orig_r10 + moveq 1, $r10 + push $r10 ; frametype == 1, BUSFAULT frame type + + move.d $sp, $r10 ; pt_regs argument to handle_mmu_bus_fault + + jsr handle_mmu_bus_fault ; in arch/cris/arch-v10/mm/fault.c + + ;; now we need to return through the normal path, we cannot just + ;; do the RBFexit since we might have killed off the running + ;; process due to a SEGV, scheduled due to a page blocking or + ;; whatever. + + moveq 0, $r9 ; busfault is equivalent to an irq + + ba ret_from_intr + nop + + ;; special handlers for breakpoint and NMI +hwbreakpoint: + push $dccr + di + push $r10 + push $r11 + move.d [hw_bp_trig_ptr],$r10 + move $brp,$r11 + move.d $r11,[$r10+] + move.d $r10,[hw_bp_trig_ptr] +1: pop $r11 + pop $r10 + pop $dccr + retb + nop + +IRQ1_interrupt: + ;; this prologue MUST match the one in irq.h and the struct in ptregs.h!!! + move $brp,[$sp=$sp-16]; instruction pointer and room for a fake SBFS frame + push $srp + push $dccr + push $mof + di + subq 14*4, $sp + movem $r13, [$sp] + push $r10 ; push orig_r10 + clear.d [$sp=$sp-4] ; frametype == 0, normal frame + + ;; If there is a glitch on the NMI pin shorter than ~100ns + ;; (i.e. non-active by the time we get here) then the nmi_pin bit + ;; in R_IRQ_MASK0_RD will already be cleared. The watchdog_nmi bit + ;; is cleared by us however (when feeding the watchdog), which is why + ;; we use that bit to determine what brought us here. + + move.d [R_IRQ_MASK0_RD], $r1 ; External NMI or watchdog? + and.d (1<<30), $r1 + bne wdog + move.d $sp, $r10 + jsr handle_nmi + setf m ; Enable NMI again + ba _Rexit ; Return the standard way + nop +wdog: +#if defined(CONFIG_ETRAX_WATCHDOG) +;; Check if we're waiting for reset to happen, as signalled by +;; hard_reset_now setting cause_of_death to a magic value. If so, just +;; get stuck until reset happens. + .comm cause_of_death, 4 ;; Don't declare this anywhere. + move.d [cause_of_death], $r10 + cmp.d 0xbedead, $r10 +_killed_by_death: + beq _killed_by_death + nop + +;; We'll see this in ksymoops dumps. +Watchdog_bite: + +#ifdef CONFIG_ETRAX_WATCHDOG_NICE_DOGGY + ;; We just restart the watchdog here to be sure we dont get + ;; hit while printing the watchdogmsg below + ;; This restart is compatible with the rest of the C-code, so + ;; the C-code can keep restarting the watchdog after this point. + ;; The non-NICE_DOGGY code below though, disables the possibility + ;; to restart since it changes the watchdog key, to avoid any + ;; buggy loops etc. keeping the watchdog alive after this. + jsr reset_watchdog +#else + +;; We need to extend the 3.3ms after the NMI at watchdog bite, so we have +;; time for an oops-dump over a 115k2 serial wire. Another 100ms should do. + +;; Change the watchdog key to an arbitrary 3-bit value and restart the +;; watchdog. +#define WD_INIT 2 + moveq IO_FIELD (R_WATCHDOG, key, WD_INIT), $r10 + move.d R_WATCHDOG, $r11 + + move.d $r10, [$r11] + moveq IO_FIELD (R_WATCHDOG, key, \ + IO_EXTRACT (R_WATCHDOG, key, \ + IO_MASK (R_WATCHDOG, key)) \ + ^ WD_INIT) \ + | IO_STATE (R_WATCHDOG, enable, start), $r10 + move.d $r10, [$r11] + +#endif + +;; Note that we don't do "setf m" here (or after two necessary NOPs), +;; since *not* doing that saves us from re-entrancy checks. We don't want +;; to get here again due to possible subsequent NMIs; we want the watchdog +;; to reset us. + + move.d _watchdogmsg,$r10 + jsr printk + + move.d $sp, $r10 + jsr watchdog_bite_hook + +;; This nop is here so we see the "Watchdog_bite" label in ksymoops dumps +;; rather than "spurious_interrupt". + nop +;; At this point we drop down into spurious_interrupt, which will do a +;; hard reset. + + .section .rodata,"a" +_watchdogmsg: + .ascii "Oops: bitten by watchdog\n\0" + .previous + +#endif /* CONFIG_ETRAX_WATCHDOG */ + +spurious_interrupt: + di + jump hard_reset_now + + ;; this handles the case when multiple interrupts arrive at the same time + ;; we jump to the first set interrupt bit in a priority fashion + ;; the hardware will call the unserved interrupts after the handler finishes + +multiple_interrupt: + ;; this prologue MUST match the one in irq.h and the struct in ptregs.h!!! + move $irp,[$sp=$sp-16]; instruction pointer and room for a fake SBFS frame + push $srp + push $dccr + push $mof + di + subq 14*4, $sp + movem $r13, [$sp] + push $r10 ; push orig_r10 + clear.d [$sp=$sp-4] ; frametype == 0, normal frame + + move.d $sp, $r10 + jsr do_multiple_IRQ + + jump ret_from_intr + +do_sigtrap: + ;; + ;; SIGTRAP the process that executed the break instruction. + ;; Make a frame that Rexit in entry.S expects. + ;; + move $brp, [$sp=$sp-16] ; Push BRP while faking a cpu status record. + push $srp ; Push subroutine return pointer. + push $dccr ; Push condition codes. + push $mof ; Push multiply overflow reg. + di ; Need to disable irq's at this point. + subq 14*4, $sp ; Make room for r0-r13. + movem $r13, [$sp] ; Push the r0-r13 registers. + push $r10 ; Push orig_r10. + clear.d [$sp=$sp-4] ; Frametype - this is a normal stackframe. + + movs.w -8192,$r9 ; THREAD_SIZE == 8192 + and.d $sp, $r9 + move.d [$r9+TI_task], $r10 + move.d [$r10+TASK_pid], $r10 ; current->pid as arg1. + moveq 5, $r11 ; SIGTRAP as arg2. + jsr sys_kill + jump ret_from_intr ; Use the return routine for interrupts. + +gdb_handle_breakpoint: + push $dccr + push $r0 +#ifdef CONFIG_ETRAX_KGDB + move $dccr, $r0 ; U-flag not affected by previous insns. + btstq 8, $r0 ; Test the U-flag. + bmi _ugdb_handle_breakpoint ; Go to user mode debugging. + nop ; Empty delay slot (cannot pop r0 here). + pop $r0 ; Restore r0. + ba kgdb_handle_breakpoint ; Go to kernel debugging. + pop $dccr ; Restore dccr in delay slot. +#endif + +_ugdb_handle_breakpoint: + move $brp, $r0 ; Use r0 temporarily for calculation. + subq 2, $r0 ; Set to address of previous instruction. + move $r0, $brp + pop $r0 ; Restore r0. + ba do_sigtrap ; SIGTRAP the offending process. + pop $dccr ; Restore dccr in delay slot. + + .data + +hw_bp_trigs: + .space 64*4 +hw_bp_trig_ptr: + .dword hw_bp_trigs + + .section .rodata,"a" +sys_call_table: + .long sys_restart_syscall /* 0 - old "setup()" system call, used for restarting */ + .long sys_exit + .long sys_fork + .long sys_read + .long sys_write + .long sys_open /* 5 */ + .long sys_close + .long sys_waitpid + .long sys_creat + .long sys_link + .long sys_unlink /* 10 */ + .long sys_execve + .long sys_chdir + .long sys_time + .long sys_mknod + .long sys_chmod /* 15 */ + .long sys_lchown16 + .long sys_ni_syscall /* old break syscall holder */ + .long sys_stat + .long sys_lseek + .long sys_getpid /* 20 */ + .long sys_mount + .long sys_oldumount + .long sys_setuid16 + .long sys_getuid16 + .long sys_stime /* 25 */ + .long sys_ptrace + .long sys_alarm + .long sys_fstat + .long sys_pause + .long sys_utime /* 30 */ + .long sys_ni_syscall /* old stty syscall holder */ + .long sys_ni_syscall /* old gtty syscall holder */ + .long sys_access + .long sys_nice + .long sys_ni_syscall /* 35 old ftime syscall holder */ + .long sys_sync + .long sys_kill + .long sys_rename + .long sys_mkdir + .long sys_rmdir /* 40 */ + .long sys_dup + .long sys_pipe + .long sys_times + .long sys_ni_syscall /* old prof syscall holder */ + .long sys_brk /* 45 */ + .long sys_setgid16 + .long sys_getgid16 + .long sys_signal + .long sys_geteuid16 + .long sys_getegid16 /* 50 */ + .long sys_acct + .long sys_umount /* recycled never used phys( */ + .long sys_ni_syscall /* old lock syscall holder */ + .long sys_ioctl + .long sys_fcntl /* 55 */ + .long sys_ni_syscall /* old mpx syscall holder */ + .long sys_setpgid + .long sys_ni_syscall /* old ulimit syscall holder */ + .long sys_ni_syscall /* old sys_olduname holder */ + .long sys_umask /* 60 */ + .long sys_chroot + .long sys_ustat + .long sys_dup2 + .long sys_getppid + .long sys_getpgrp /* 65 */ + .long sys_setsid + .long sys_sigaction + .long sys_sgetmask + .long sys_ssetmask + .long sys_setreuid16 /* 70 */ + .long sys_setregid16 + .long sys_sigsuspend + .long sys_sigpending + .long sys_sethostname + .long sys_setrlimit /* 75 */ + .long sys_old_getrlimit + .long sys_getrusage + .long sys_gettimeofday + .long sys_settimeofday + .long sys_getgroups16 /* 80 */ + .long sys_setgroups16 + .long sys_select /* was old_select in Linux/E100 */ + .long sys_symlink + .long sys_lstat + .long sys_readlink /* 85 */ + .long sys_uselib + .long sys_swapon + .long sys_reboot + .long sys_old_readdir + .long sys_old_mmap /* 90 */ + .long sys_munmap + .long sys_truncate + .long sys_ftruncate + .long sys_fchmod + .long sys_fchown16 /* 95 */ + .long sys_getpriority + .long sys_setpriority + .long sys_ni_syscall /* old profil syscall holder */ + .long sys_statfs + .long sys_fstatfs /* 100 */ + .long sys_ni_syscall /* sys_ioperm in i386 */ + .long sys_socketcall + .long sys_syslog + .long sys_setitimer + .long sys_getitimer /* 105 */ + .long sys_newstat + .long sys_newlstat + .long sys_newfstat + .long sys_ni_syscall /* old sys_uname holder */ + .long sys_ni_syscall /* 110 */ /* sys_iopl in i386 */ + .long sys_vhangup + .long sys_ni_syscall /* old "idle" system call */ + .long sys_ni_syscall /* vm86old in i386 */ + .long sys_wait4 + .long sys_swapoff /* 115 */ + .long sys_sysinfo + .long sys_ipc + .long sys_fsync + .long sys_sigreturn + .long sys_clone /* 120 */ + .long sys_setdomainname + .long sys_newuname + .long sys_ni_syscall /* sys_modify_ldt */ + .long sys_adjtimex + .long sys_mprotect /* 125 */ + .long sys_sigprocmask + .long sys_ni_syscall /* old "create_module" */ + .long sys_init_module + .long sys_delete_module + .long sys_ni_syscall /* 130: old "get_kernel_syms" */ + .long sys_quotactl + .long sys_getpgid + .long sys_fchdir + .long sys_bdflush + .long sys_sysfs /* 135 */ + .long sys_personality + .long sys_ni_syscall /* for afs_syscall */ + .long sys_setfsuid16 + .long sys_setfsgid16 + .long sys_llseek /* 140 */ + .long sys_getdents + .long sys_select + .long sys_flock + .long sys_msync + .long sys_readv /* 145 */ + .long sys_writev + .long sys_getsid + .long sys_fdatasync + .long sys_sysctl + .long sys_mlock /* 150 */ + .long sys_munlock + .long sys_mlockall + .long sys_munlockall + .long sys_sched_setparam + .long sys_sched_getparam /* 155 */ + .long sys_sched_setscheduler + .long sys_sched_getscheduler + .long sys_sched_yield + .long sys_sched_get_priority_max + .long sys_sched_get_priority_min /* 160 */ + .long sys_sched_rr_get_interval + .long sys_nanosleep + .long sys_mremap + .long sys_setresuid16 + .long sys_getresuid16 /* 165 */ + .long sys_ni_syscall /* sys_vm86 */ + .long sys_ni_syscall /* Old sys_query_module */ + .long sys_poll + .long sys_ni_syscall /* old nfsservctl */ + .long sys_setresgid16 /* 170 */ + .long sys_getresgid16 + .long sys_prctl + .long sys_rt_sigreturn + .long sys_rt_sigaction + .long sys_rt_sigprocmask /* 175 */ + .long sys_rt_sigpending + .long sys_rt_sigtimedwait + .long sys_rt_sigqueueinfo + .long sys_rt_sigsuspend + .long sys_pread64 /* 180 */ + .long sys_pwrite64 + .long sys_chown16 + .long sys_getcwd + .long sys_capget + .long sys_capset /* 185 */ + .long sys_sigaltstack + .long sys_sendfile + .long sys_ni_syscall /* streams1 */ + .long sys_ni_syscall /* streams2 */ + .long sys_vfork /* 190 */ + .long sys_getrlimit + .long sys_mmap2 /* mmap_pgoff */ + .long sys_truncate64 + .long sys_ftruncate64 + .long sys_stat64 /* 195 */ + .long sys_lstat64 + .long sys_fstat64 + .long sys_lchown + .long sys_getuid + .long sys_getgid /* 200 */ + .long sys_geteuid + .long sys_getegid + .long sys_setreuid + .long sys_setregid + .long sys_getgroups /* 205 */ + .long sys_setgroups + .long sys_fchown + .long sys_setresuid + .long sys_getresuid + .long sys_setresgid /* 210 */ + .long sys_getresgid + .long sys_chown + .long sys_setuid + .long sys_setgid + .long sys_setfsuid /* 215 */ + .long sys_setfsgid + .long sys_pivot_root + .long sys_mincore + .long sys_madvise + .long sys_getdents64 /* 220 */ + .long sys_fcntl64 + .long sys_ni_syscall /* reserved for TUX */ + .long sys_ni_syscall + .long sys_gettid + .long sys_readahead /* 225 */ + .long sys_setxattr + .long sys_lsetxattr + .long sys_fsetxattr + .long sys_getxattr + .long sys_lgetxattr /* 230 */ + .long sys_fgetxattr + .long sys_listxattr + .long sys_llistxattr + .long sys_flistxattr + .long sys_removexattr /* 235 */ + .long sys_lremovexattr + .long sys_fremovexattr + .long sys_tkill + .long sys_sendfile64 + .long sys_futex /* 240 */ + .long sys_sched_setaffinity + .long sys_sched_getaffinity + .long sys_ni_syscall /* sys_set_thread_area */ + .long sys_ni_syscall /* sys_get_thread_area */ + .long sys_io_setup /* 245 */ + .long sys_io_destroy + .long sys_io_getevents + .long sys_io_submit + .long sys_io_cancel + .long sys_fadvise64 /* 250 */ + .long sys_ni_syscall + .long sys_exit_group + .long sys_lookup_dcookie + .long sys_epoll_create + .long sys_epoll_ctl /* 255 */ + .long sys_epoll_wait + .long sys_remap_file_pages + .long sys_set_tid_address + .long sys_timer_create + .long sys_timer_settime /* 260 */ + .long sys_timer_gettime + .long sys_timer_getoverrun + .long sys_timer_delete + .long sys_clock_settime + .long sys_clock_gettime /* 265 */ + .long sys_clock_getres + .long sys_clock_nanosleep + .long sys_statfs64 + .long sys_fstatfs64 + .long sys_tgkill /* 270 */ + .long sys_utimes + .long sys_fadvise64_64 + .long sys_ni_syscall /* sys_vserver */ + .long sys_ni_syscall /* sys_mbind */ + .long sys_ni_syscall /* 275 sys_get_mempolicy */ + .long sys_ni_syscall /* sys_set_mempolicy */ + .long sys_mq_open + .long sys_mq_unlink + .long sys_mq_timedsend + .long sys_mq_timedreceive /* 280 */ + .long sys_mq_notify + .long sys_mq_getsetattr + .long sys_ni_syscall + .long sys_waitid + .long sys_ni_syscall /* 285 */ /* available */ + .long sys_add_key + .long sys_request_key + .long sys_keyctl + .long sys_ioprio_set + .long sys_ioprio_get /* 290 */ + .long sys_inotify_init + .long sys_inotify_add_watch + .long sys_inotify_rm_watch + .long sys_migrate_pages + .long sys_openat /* 295 */ + .long sys_mkdirat + .long sys_mknodat + .long sys_fchownat + .long sys_futimesat + .long sys_fstatat64 /* 300 */ + .long sys_unlinkat + .long sys_renameat + .long sys_linkat + .long sys_symlinkat + .long sys_readlinkat /* 305 */ + .long sys_fchmodat + .long sys_faccessat + .long sys_pselect6 + .long sys_ppoll + .long sys_unshare /* 310 */ + .long sys_set_robust_list + .long sys_get_robust_list + .long sys_splice + .long sys_sync_file_range + .long sys_tee /* 315 */ + .long sys_vmsplice + .long sys_move_pages + .long sys_getcpu + .long sys_epoll_pwait + .long sys_utimensat /* 320 */ + .long sys_signalfd + .long sys_timerfd_create + .long sys_eventfd + .long sys_fallocate + .long sys_timerfd_settime /* 325 */ + .long sys_timerfd_gettime + .long sys_signalfd4 + .long sys_eventfd2 + .long sys_epoll_create1 + .long sys_dup3 /* 330 */ + .long sys_pipe2 + .long sys_inotify_init1 + .long sys_preadv + .long sys_pwritev + .long sys_setns /* 335 */ + .long sys_name_to_handle_at + .long sys_open_by_handle_at + .long sys_rt_tgsigqueueinfo + .long sys_perf_event_open + .long sys_recvmmsg /* 340 */ + .long sys_accept4 + .long sys_fanotify_init + .long sys_fanotify_mark + .long sys_prlimit64 + .long sys_clock_adjtime /* 345 */ + .long sys_syncfs + .long sys_sendmmsg + .long sys_process_vm_readv + .long sys_process_vm_writev + .long sys_kcmp /* 350 */ + .long sys_finit_module + + /* + * NOTE!! This doesn't have to be exact - we just have + * to make sure we have _enough_ of the "sys_ni_syscall" + * entries. Don't panic if you notice that this hasn't + * been shrunk every time we add a new system call. + */ + + .rept NR_syscalls-(.-sys_call_table)/4 + .long sys_ni_syscall + .endr + |