diff options
Diffstat (limited to 'arch/cris/arch-v32/kernel/setup.c')
| -rw-r--r-- | arch/cris/arch-v32/kernel/setup.c | 170 |
1 files changed, 170 insertions, 0 deletions
diff --git a/arch/cris/arch-v32/kernel/setup.c b/arch/cris/arch-v32/kernel/setup.c new file mode 100644 index 000000000..cd1865d68 --- /dev/null +++ b/arch/cris/arch-v32/kernel/setup.c @@ -0,0 +1,170 @@ +/* + * Display CPU info in /proc/cpuinfo. + * + * Copyright (C) 2003, Axis Communications AB. + */ + +#include <linux/seq_file.h> +#include <linux/proc_fs.h> +#include <linux/delay.h> +#include <linux/param.h> + +#include <linux/i2c.h> +#include <linux/platform_device.h> + +#ifdef CONFIG_PROC_FS + +#define HAS_FPU 0x0001 +#define HAS_MMU 0x0002 +#define HAS_ETHERNET100 0x0004 +#define HAS_TOKENRING 0x0008 +#define HAS_SCSI 0x0010 +#define HAS_ATA 0x0020 +#define HAS_USB 0x0040 +#define HAS_IRQ_BUG 0x0080 +#define HAS_MMU_BUG 0x0100 + +struct cpu_info { + char *cpu_model; + unsigned short rev; + unsigned short cache_size; + unsigned short flags; +}; + +/* Some of these model are here for historical reasons only. */ +static struct cpu_info cpinfo[] = { + {"ETRAX 1", 0, 0, 0}, + {"ETRAX 2", 1, 0, 0}, + {"ETRAX 3", 2, 0, 0}, + {"ETRAX 4", 3, 0, 0}, + {"Simulator", 7, 8, HAS_ETHERNET100 | HAS_SCSI | HAS_ATA}, + {"ETRAX 100", 8, 8, HAS_ETHERNET100 | HAS_SCSI | HAS_ATA | HAS_IRQ_BUG}, + {"ETRAX 100", 9, 8, HAS_ETHERNET100 | HAS_SCSI | HAS_ATA}, + + {"ETRAX 100LX", 10, 8, HAS_ETHERNET100 | HAS_SCSI | HAS_ATA | HAS_USB + | HAS_MMU | HAS_MMU_BUG}, + + {"ETRAX 100LX v2", 11, 8, HAS_ETHERNET100 | HAS_SCSI | HAS_ATA | HAS_USB + | HAS_MMU}, +#ifdef CONFIG_ETRAXFS + {"ETRAX FS", 32, 32, HAS_ETHERNET100 | HAS_ATA | HAS_MMU}, +#else + {"ARTPEC-3", 32, 32, HAS_ETHERNET100 | HAS_MMU}, +#endif + {"Unknown", 0, 0, 0} +}; + +int show_cpuinfo(struct seq_file *m, void *v) +{ + int i; + int cpu = (int)v - 1; + unsigned long revision; + struct cpu_info *info; + + info = &cpinfo[ARRAY_SIZE(cpinfo) - 1]; + + revision = rdvr(); + + for (i = 0; i < ARRAY_SIZE(cpinfo); i++) { + if (cpinfo[i].rev == revision) { + info = &cpinfo[i]; + break; + } + } + + seq_printf(m, + "processor\t: %d\n" + "cpu\t\t: CRIS\n" + "cpu revision\t: %lu\n" + "cpu model\t: %s\n" + "cache size\t: %d KB\n" + "fpu\t\t: %s\n" + "mmu\t\t: %s\n" + "mmu DMA bug\t: %s\n" + "ethernet\t: %s Mbps\n" + "token ring\t: %s\n" + "scsi\t\t: %s\n" + "ata\t\t: %s\n" + "usb\t\t: %s\n" + "bogomips\t: %lu.%02lu\n\n", + + cpu, + revision, + info->cpu_model, + info->cache_size, + info->flags & HAS_FPU ? "yes" : "no", + info->flags & HAS_MMU ? "yes" : "no", + info->flags & HAS_MMU_BUG ? "yes" : "no", + info->flags & HAS_ETHERNET100 ? "10/100" : "10", + info->flags & HAS_TOKENRING ? "4/16 Mbps" : "no", + info->flags & HAS_SCSI ? "yes" : "no", + info->flags & HAS_ATA ? "yes" : "no", + info->flags & HAS_USB ? "yes" : "no", + (loops_per_jiffy * HZ + 500) / 500000, + ((loops_per_jiffy * HZ + 500) / 5000) % 100); + + return 0; +} + +#endif /* CONFIG_PROC_FS */ + +void show_etrax_copyright(void) +{ +#ifdef CONFIG_ETRAXFS + printk(KERN_INFO "Linux/CRISv32 port on ETRAX FS " + "(C) 2003, 2004 Axis Communications AB\n"); +#else + printk(KERN_INFO "Linux/CRISv32 port on ARTPEC-3 " + "(C) 2003-2009 Axis Communications AB\n"); +#endif +} + +static struct i2c_board_info __initdata i2c_info[] = { + {I2C_BOARD_INFO("camblock", 0x43)}, + {I2C_BOARD_INFO("tmp100", 0x48)}, + {I2C_BOARD_INFO("tmp100", 0x4A)}, + {I2C_BOARD_INFO("tmp100", 0x4C)}, + {I2C_BOARD_INFO("tmp100", 0x4D)}, + {I2C_BOARD_INFO("tmp100", 0x4E)}, +#ifdef CONFIG_RTC_DRV_PCF8563 + {I2C_BOARD_INFO("pcf8563", 0x51)}, +#endif +#ifdef CONFIG_ETRAX_VIRTUAL_GPIO + {I2C_BOARD_INFO("vgpio", 0x20)}, + {I2C_BOARD_INFO("vgpio", 0x21)}, +#endif + {I2C_BOARD_INFO("pca9536", 0x41)}, + {I2C_BOARD_INFO("fnp300", 0x40)}, + {I2C_BOARD_INFO("fnp300", 0x42)}, + {I2C_BOARD_INFO("adc101", 0x54)}, +}; + +static struct i2c_board_info __initdata i2c_info2[] = { + {I2C_BOARD_INFO("camblock", 0x43)}, + {I2C_BOARD_INFO("tmp100", 0x48)}, + {I2C_BOARD_INFO("tmp100", 0x4A)}, + {I2C_BOARD_INFO("tmp100", 0x4C)}, + {I2C_BOARD_INFO("tmp100", 0x4D)}, + {I2C_BOARD_INFO("tmp100", 0x4E)}, +#ifdef CONFIG_ETRAX_VIRTUAL_GPIO + {I2C_BOARD_INFO("vgpio", 0x20)}, + {I2C_BOARD_INFO("vgpio", 0x21)}, +#endif + {I2C_BOARD_INFO("pca9536", 0x41)}, + {I2C_BOARD_INFO("fnp300", 0x40)}, + {I2C_BOARD_INFO("fnp300", 0x42)}, + {I2C_BOARD_INFO("adc101", 0x54)}, +}; + +static struct i2c_board_info __initdata i2c_info3[] = { + {I2C_BOARD_INFO("adc101", 0x54)}, +}; + +static int __init etrax_init(void) +{ + i2c_register_board_info(0, i2c_info, ARRAY_SIZE(i2c_info)); + i2c_register_board_info(1, i2c_info2, ARRAY_SIZE(i2c_info2)); + i2c_register_board_info(2, i2c_info3, ARRAY_SIZE(i2c_info3)); + return 0; +} +arch_initcall(etrax_init); |