1 files changed, 376 insertions, 0 deletions
diff --git a/arch/cris/boot/compressed/misc.c b/arch/cris/boot/compressed/misc.c
new file mode 100644
index 000000000..548d886b0
--- /dev/null
+++ b/arch/cris/boot/compressed/misc.c
@@ -0,0 +1,376 @@
+/*
+ * misc.c
+ *
+ * This is a collection of several routines from gzip-1.0.3
+ * adapted for Linux.
+ *
+ * malloc by Hannu Savolainen 1993 and Matthias Urlichs 1994
+ * puts by Nick Holloway 1993, better puts by Martin Mares 1995
+ * adaptation for Linux/CRIS Axis Communications AB, 1999
+ *
+ */
+
+/* where the piggybacked kernel image expects itself to live.
+ * it is the same address we use when we network load an uncompressed
+ * image into DRAM, and it is the address the kernel is linked to live
+ * at by vmlinux.lds.S
+ */
+
+#define KERNEL_LOAD_ADR 0x40004000
+
+#include <linux/types.h>
+
+#ifdef CONFIG_ETRAX_ARCH_V32
+#include <hwregs/reg_rdwr.h>
+#include <hwregs/reg_map.h>
+#include <hwregs/ser_defs.h>
+#include <hwregs/pinmux_defs.h>
+#ifdef CONFIG_CRIS_MACH_ARTPEC3
+#include <hwregs/clkgen_defs.h>
+#endif
+#else
+#include <arch/svinto.h>
+#endif
+
+/*
+ * gzip declarations
+ */
+
+#define OF(args)  args
+#define STATIC static
+
+void *memset(void *s, int c, size_t n);
+void *memcpy(void *__dest, __const void *__src, size_t __n);
+
+#define memzero(s, n)     memset((s), 0, (n))
+
+typedef unsigned char  uch;
+typedef unsigned short ush;
+typedef unsigned long  ulg;
+
+#define WSIZE 0x8000		/* Window size must be at least 32k, */
+				/* and a power of two */
+
+static uch *inbuf;	     /* input buffer */
+static uch window[WSIZE];    /* Sliding window buffer */
+
+unsigned inptr = 0;	/* index of next byte to be processed in inbuf
+			 * After decompression it will contain the
+			 * compressed size, and head.S will read it.
+			 */
+
+static unsigned outcnt = 0;  /* bytes in output buffer */
+
+/* gzip flag byte */
+#define ASCII_FLAG   0x01 /* bit 0 set: file probably ascii text */
+#define CONTINUATION 0x02 /* bit 1 set: continuation of multi-part gzip file */
+#define EXTRA_FIELD  0x04 /* bit 2 set: extra field present */
+#define ORIG_NAME    0x08 /* bit 3 set: original file name present */
+#define COMMENT      0x10 /* bit 4 set: file comment present */
+#define ENCRYPTED    0x20 /* bit 5 set: file is encrypted */
+#define RESERVED     0xC0 /* bit 6,7:   reserved */
+
+#define get_byte() (inbuf[inptr++])
+
+/* Diagnostic functions */
+#ifdef DEBUG
+#  define Assert(cond, msg) do { \
+		if (!(cond)) \
+			error(msg); \
+	} while (0)
+#  define Trace(x) fprintf x
+#  define Tracev(x) do { \
+		if (verbose) \
+			fprintf x; \
+	} while (0)
+#  define Tracevv(x) do { \
+		if (verbose > 1) \
+			fprintf x; \
+	} while (0)
+#  define Tracec(c, x) do { \
+		if (verbose && (c)) \
+			fprintf x; \
+	} while (0)
+#  define Tracecv(c, x) do { \
+		if (verbose > 1 && (c)) \
+			fprintf x; \
+	} while (0)
+#else
+#  define Assert(cond, msg)
+#  define Trace(x)
+#  define Tracev(x)
+#  define Tracevv(x)
+#  define Tracec(c, x)
+#  define Tracecv(c, x)
+#endif
+
+static void flush_window(void);
+static void error(char *m);
+static void aputs(const char *s);
+
+extern char *input_data;  /* lives in head.S */
+
+static long bytes_out;
+static uch *output_data;
+static unsigned long output_ptr;
+
+/* the "heap" is put directly after the BSS ends, at end */
+
+extern int _end;
+static long free_mem_ptr = (long)&_end;
+static long free_mem_end_ptr;
+
+#include "../../../../../lib/inflate.c"
+
+/* decompressor info and error messages to serial console */
+
+#ifdef CONFIG_ETRAX_ARCH_V32
+static inline void serout(const char *s, reg_scope_instances regi_ser)
+{
+	reg_ser_rs_stat_din rs;
+	reg_ser_rw_dout dout = {.data = *s};
+
+	do {
+		rs = REG_RD(ser, regi_ser, rs_stat_din);
+	}
+	while (!rs.tr_rdy);/* Wait for transceiver. */
+
+	REG_WR(ser, regi_ser, rw_dout, dout);
+}
+#define SEROUT(S, N) \
+	do { \
+		serout(S, regi_ser ## N); \
+		s++; \
+	} while (0)
+#else
+#define SEROUT(S, N) do { \
+		while (!(*R_SERIAL ## N ## _STATUS & (1 << 5))) \
+			; \
+		*R_SERIAL ## N ## _TR_DATA = *s++; \
+	} while (0)
+#endif
+
+static void aputs(const char *s)
+{
+#ifndef CONFIG_ETRAX_DEBUG_PORT_NULL
+	while (*s) {
+#ifdef CONFIG_ETRAX_DEBUG_PORT0
+		SEROUT(s, 0);
+#endif
+#ifdef CONFIG_ETRAX_DEBUG_PORT1
+		SEROUT(s, 1);
+#endif
+#ifdef CONFIG_ETRAX_DEBUG_PORT2
+		SEROUT(s, 2);
+#endif
+#ifdef CONFIG_ETRAX_DEBUG_PORT3
+		SEROUT(s, 3);
+#endif
+	}
+#endif /* CONFIG_ETRAX_DEBUG_PORT_NULL */
+}
+
+void *memset(void *s, int c, size_t n)
+{
+	int i;
+	char *ss = (char*)s;
+
+	for (i=0;i<n;i++) ss[i] = c;
+
+	return s;
+}
+
+void *memcpy(void *__dest, __const void *__src, size_t __n)
+{
+	int i;
+	char *d = (char *)__dest, *s = (char *)__src;
+
+	for (i = 0; i < __n; i++)
+		d[i] = s[i];
+
+	return __dest;
+}
+
+/* ===========================================================================
+ * Write the output window window[0..outcnt-1] and update crc and bytes_out.
+ * (Used for the decompressed data only.)
+ */
+
+static void flush_window(void)
+{
+	ulg c = crc;         /* temporary variable */
+	unsigned n;
+	uch *in, *out, ch;
+
+	in = window;
+	out = &output_data[output_ptr];
+	for (n = 0; n < outcnt; n++) {
+		ch = *out = *in;
+		out++;
+		in++;
+		c = crc_32_tab[((int)c ^ ch) & 0xff] ^ (c >> 8);
+	}
+	crc = c;
+	bytes_out += (ulg)outcnt;
+	output_ptr += (ulg)outcnt;
+	outcnt = 0;
+}
+
+static void error(char *x)
+{
+	aputs("\n\n");
+	aputs(x);
+	aputs("\n\n -- System halted\n");
+
+	while(1);	/* Halt */
+}
+
+void setup_normal_output_buffer(void)
+{
+	output_data = (char *)KERNEL_LOAD_ADR;
+}
+
+#ifdef CONFIG_ETRAX_ARCH_V32
+static inline void serial_setup(reg_scope_instances regi_ser)
+{
+	reg_ser_rw_xoff xoff;
+	reg_ser_rw_tr_ctrl tr_ctrl;
+	reg_ser_rw_rec_ctrl rec_ctrl;
+	reg_ser_rw_tr_baud_div tr_baud;
+	reg_ser_rw_rec_baud_div rec_baud;
+
+	/* Turn off XOFF. */
+	xoff = REG_RD(ser, regi_ser, rw_xoff);
+
+	xoff.chr = 0;
+	xoff.automatic = regk_ser_no;
+
+	REG_WR(ser, regi_ser, rw_xoff, xoff);
+
+	/* Set baudrate and stopbits. */
+	tr_ctrl = REG_RD(ser, regi_ser, rw_tr_ctrl);
+	rec_ctrl = REG_RD(ser, regi_ser, rw_rec_ctrl);
+	tr_baud = REG_RD(ser, regi_ser, rw_tr_baud_div);
+	rec_baud = REG_RD(ser, regi_ser, rw_rec_baud_div);
+
+	tr_ctrl.stop_bits = 1;	/* 2 stop bits. */
+	tr_ctrl.en = 1; /* enable transmitter */
+	rec_ctrl.en = 1; /* enabler receiver */
+
+	/*
+	 * The baudrate setup used to be a bit fishy, but now transmitter and
+	 * receiver are both set to the intended baud rate, 115200.
+	 * The magic value is 29.493 MHz.
+	 */
+	tr_ctrl.base_freq = regk_ser_f29_493;
+	rec_ctrl.base_freq = regk_ser_f29_493;
+	tr_baud.div = (29493000 / 8) / 115200;
+	rec_baud.div = (29493000 / 8) / 115200;
+
+	REG_WR(ser, regi_ser, rw_tr_ctrl, tr_ctrl);
+	REG_WR(ser, regi_ser, rw_tr_baud_div, tr_baud);
+	REG_WR(ser, regi_ser, rw_rec_ctrl, rec_ctrl);
+	REG_WR(ser, regi_ser, rw_rec_baud_div, rec_baud);
+}
+#endif
+
+void decompress_kernel(void)
+{
+	char revision;
+	char compile_rev;
+
+#ifdef CONFIG_ETRAX_ARCH_V32
+	/* Need at least a CRISv32 to run. */
+	compile_rev = 32;
+#if defined(CONFIG_ETRAX_DEBUG_PORT1) || \
+    defined(CONFIG_ETRAX_DEBUG_PORT2) || \
+    defined(CONFIG_ETRAX_DEBUG_PORT3)
+	reg_pinmux_rw_hwprot hwprot;
+
+#ifdef CONFIG_CRIS_MACH_ARTPEC3
+	reg_clkgen_rw_clk_ctrl clk_ctrl;
+
+	/* Enable corresponding clock region when serial 1..3 selected */
+
+	clk_ctrl = REG_RD(clkgen, regi_clkgen, rw_clk_ctrl);
+	clk_ctrl.sser_ser_dma6_7 = regk_clkgen_yes;
+	REG_WR(clkgen, regi_clkgen, rw_clk_ctrl, clk_ctrl);
+#endif
+
+	/* pinmux setup for ports 1..3 */
+	hwprot = REG_RD(pinmux, regi_pinmux, rw_hwprot);
+#endif
+
+
+#ifdef CONFIG_ETRAX_DEBUG_PORT0
+	serial_setup(regi_ser0);
+#endif
+#ifdef CONFIG_ETRAX_DEBUG_PORT1
+	hwprot.ser1 = regk_pinmux_yes;
+	serial_setup(regi_ser1);
+#endif
+#ifdef CONFIG_ETRAX_DEBUG_PORT2
+	hwprot.ser2 = regk_pinmux_yes;
+	serial_setup(regi_ser2);
+#endif
+#ifdef CONFIG_ETRAX_DEBUG_PORT3
+	hwprot.ser3 = regk_pinmux_yes;
+	serial_setup(regi_ser3);
+#endif
+#if defined(CONFIG_ETRAX_DEBUG_PORT1) || \
+    defined(CONFIG_ETRAX_DEBUG_PORT2) || \
+    defined(CONFIG_ETRAX_DEBUG_PORT3)
+	REG_WR(pinmux, regi_pinmux, rw_hwprot, hwprot);
+#endif
+
+	/* input_data is set in head.S */
+	inbuf = input_data;
+#else /* CRISv10 */
+	/* Need at least a crisv10 to run. */
+	compile_rev = 10;
+
+	/* input_data is set in head.S */
+	inbuf = input_data;
+
+#ifdef CONFIG_ETRAX_DEBUG_PORT0
+	*R_SERIAL0_XOFF = 0;
+	*R_SERIAL0_BAUD = 0x99;
+	*R_SERIAL0_TR_CTRL = 0x40;
+#endif
+#ifdef CONFIG_ETRAX_DEBUG_PORT1
+	*R_SERIAL1_XOFF = 0;
+	*R_SERIAL1_BAUD = 0x99;
+	*R_SERIAL1_TR_CTRL = 0x40;
+#endif
+#ifdef CONFIG_ETRAX_DEBUG_PORT2
+	*R_GEN_CONFIG = 0x08;
+	*R_SERIAL2_XOFF = 0;
+	*R_SERIAL2_BAUD = 0x99;
+	*R_SERIAL2_TR_CTRL = 0x40;
+#endif
+#ifdef CONFIG_ETRAX_DEBUG_PORT3
+	*R_GEN_CONFIG = 0x100;
+	*R_SERIAL3_XOFF = 0;
+	*R_SERIAL3_BAUD = 0x99;
+	*R_SERIAL3_TR_CTRL = 0x40;
+#endif
+#endif
+
+	setup_normal_output_buffer();
+
+	makecrc();
+
+	__asm__ volatile ("move $vr,%0" : "=rm" (revision));
+	if (revision < compile_rev) {
+#ifdef CONFIG_ETRAX_ARCH_V32
+		aputs("You need at least ETRAX FS to run Linux 2.6/crisv32\n");
+#else
+		aputs("You need an ETRAX 100LX to run linux 2.6/crisv10\n");
+#endif
+		while(1);
+	}
+
+	aputs("Uncompressing Linux...\n");
+	gunzip();
+	aputs("Done. Now booting the kernel\n");
+}