diff options
Diffstat (limited to 'arch/frv/mb93090-mb00')
| -rw-r--r-- | arch/frv/mb93090-mb00/Makefile | 15 | ||||
| -rw-r--r-- | arch/frv/mb93090-mb00/flash.c | 90 | ||||
| -rw-r--r-- | arch/frv/mb93090-mb00/pci-dma-nommu.c | 146 | ||||
| -rw-r--r-- | arch/frv/mb93090-mb00/pci-dma.c | 91 | ||||
| -rw-r--r-- | arch/frv/mb93090-mb00/pci-frv.c | 196 | ||||
| -rw-r--r-- | arch/frv/mb93090-mb00/pci-frv.h | 40 | ||||
| -rw-r--r-- | arch/frv/mb93090-mb00/pci-irq.c | 61 | ||||
| -rw-r--r-- | arch/frv/mb93090-mb00/pci-vdk.c | 419 |
8 files changed, 1058 insertions, 0 deletions
diff --git a/arch/frv/mb93090-mb00/Makefile b/arch/frv/mb93090-mb00/Makefile new file mode 100644 index 000000000..21f1df1b3 --- /dev/null +++ b/arch/frv/mb93090-mb00/Makefile @@ -0,0 +1,15 @@ +# +# Makefile for the MB93090-MB00 motherboard stuff +# + +ifeq "$(CONFIG_PCI)" "y" +obj-y := pci-frv.o pci-irq.o pci-vdk.o + +ifeq "$(CONFIG_MMU)" "y" +obj-y += pci-dma.o +else +obj-y += pci-dma-nommu.o +endif +endif + +obj-$(CONFIG_MTD) += flash.o diff --git a/arch/frv/mb93090-mb00/flash.c b/arch/frv/mb93090-mb00/flash.c new file mode 100644 index 000000000..c0e3707c2 --- /dev/null +++ b/arch/frv/mb93090-mb00/flash.c @@ -0,0 +1,90 @@ +/* Flash mappings for the MB93090-MB00 motherboard + * + * Copyright (C) 2009 Red Hat, Inc. All Rights Reserved. + * Written by David Howells (dhowells@redhat.com) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public Licence + * as published by the Free Software Foundation; either version + * 2 of the Licence, or (at your option) any later version. + */ + +#include <linux/init.h> +#include <linux/platform_device.h> +#include <linux/mtd/partitions.h> +#include <linux/mtd/physmap.h> + +#define MB93090_BOOTROM_ADDR 0xFF000000 /* Boot ROM */ +#define MB93090_BOOTROM_SIZE (2 * 1024 * 1024) +#define MB93090_USERROM_ADDR 0xFF200000 /* User ROM */ +#define MB93090_USERROM_SIZE (2 * 1024 * 1024) + +/* + * default MTD partition table for both main flash devices, expected to be + * overridden by RedBoot + */ +static struct mtd_partition mb93090_partitions[] = { + { + .name = "Filesystem", + .size = MTDPART_SIZ_FULL, + .offset = 0, + } +}; + +/* + * Definition of the MB93090 Boot ROM (on the CPU card) + */ +static struct physmap_flash_data mb93090_bootrom_data = { + .width = 2, + .nr_parts = 2, + .parts = mb93090_partitions, +}; + +static struct resource mb93090_bootrom_resource = { + .start = MB93090_BOOTROM_ADDR, + .end = MB93090_BOOTROM_ADDR + MB93090_BOOTROM_SIZE - 1, + .flags = IORESOURCE_MEM, +}; + +static struct platform_device mb93090_bootrom = { + .name = "physmap-flash", + .id = 0, + .dev.platform_data = &mb93090_bootrom_data, + .num_resources = 1, + .resource = &mb93090_bootrom_resource, +}; + +/* + * Definition of the MB93090 User ROM definition (on the motherboard) + */ +static struct physmap_flash_data mb93090_userrom_data = { + .width = 2, + .nr_parts = 2, + .parts = mb93090_partitions, +}; + +static struct resource mb93090_userrom_resource = { + .start = MB93090_USERROM_ADDR, + .end = MB93090_USERROM_ADDR + MB93090_USERROM_SIZE - 1, + .flags = IORESOURCE_MEM, +}; + +static struct platform_device mb93090_userrom = { + .name = "physmap-flash", + .id = 1, + .dev.platform_data = &mb93090_userrom_data, + .num_resources = 1, + .resource = &mb93090_userrom_resource, +}; + +/* + * register the MB93090 flashes + */ +static int __init mb93090_mtd_init(void) +{ + platform_device_register(&mb93090_bootrom); + platform_device_register(&mb93090_userrom); + return 0; +} + +module_init(mb93090_mtd_init); diff --git a/arch/frv/mb93090-mb00/pci-dma-nommu.c b/arch/frv/mb93090-mb00/pci-dma-nommu.c new file mode 100644 index 000000000..b99c2a7cc --- /dev/null +++ b/arch/frv/mb93090-mb00/pci-dma-nommu.c @@ -0,0 +1,146 @@ +/* pci-dma-nommu.c: Dynamic DMA mapping support for the FRV + * + * Copyright (C) 2004 Red Hat, Inc. All Rights Reserved. + * Written by David Woodhouse (dwmw2@infradead.org) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +#include <linux/types.h> +#include <linux/slab.h> +#include <linux/export.h> +#include <linux/dma-mapping.h> +#include <linux/list.h> +#include <linux/pci.h> +#include <asm/io.h> + +#if 1 +#define DMA_SRAM_START dma_coherent_mem_start +#define DMA_SRAM_END dma_coherent_mem_end +#else // Use video RAM on Matrox +#define DMA_SRAM_START 0xe8900000 +#define DMA_SRAM_END 0xe8a00000 +#endif + +struct dma_alloc_record { + struct list_head list; + unsigned long ofs; + unsigned long len; +}; + +static DEFINE_SPINLOCK(dma_alloc_lock); +static LIST_HEAD(dma_alloc_list); + +void *dma_alloc_coherent(struct device *hwdev, size_t size, dma_addr_t *dma_handle, gfp_t gfp) +{ + struct dma_alloc_record *new; + struct list_head *this = &dma_alloc_list; + unsigned long flags; + unsigned long start = DMA_SRAM_START; + unsigned long end; + + if (!DMA_SRAM_START) { + printk("%s called without any DMA area reserved!\n", __func__); + return NULL; + } + + new = kmalloc(sizeof (*new), GFP_ATOMIC); + if (!new) + return NULL; + + /* Round up to a reasonable alignment */ + new->len = (size + 31) & ~31; + + spin_lock_irqsave(&dma_alloc_lock, flags); + + list_for_each (this, &dma_alloc_list) { + struct dma_alloc_record *this_r = list_entry(this, struct dma_alloc_record, list); + end = this_r->ofs; + + if (end - start >= size) + goto gotone; + + start = this_r->ofs + this_r->len; + } + /* Reached end of list. */ + end = DMA_SRAM_END; + this = &dma_alloc_list; + + if (end - start >= size) { + gotone: + new->ofs = start; + list_add_tail(&new->list, this); + spin_unlock_irqrestore(&dma_alloc_lock, flags); + + *dma_handle = start; + return (void *)start; + } + + kfree(new); + spin_unlock_irqrestore(&dma_alloc_lock, flags); + return NULL; +} + +EXPORT_SYMBOL(dma_alloc_coherent); + +void dma_free_coherent(struct device *hwdev, size_t size, void *vaddr, dma_addr_t dma_handle) +{ + struct dma_alloc_record *rec; + unsigned long flags; + + spin_lock_irqsave(&dma_alloc_lock, flags); + + list_for_each_entry(rec, &dma_alloc_list, list) { + if (rec->ofs == dma_handle) { + list_del(&rec->list); + kfree(rec); + spin_unlock_irqrestore(&dma_alloc_lock, flags); + return; + } + } + spin_unlock_irqrestore(&dma_alloc_lock, flags); + BUG(); +} + +EXPORT_SYMBOL(dma_free_coherent); + +dma_addr_t dma_map_single(struct device *dev, void *ptr, size_t size, + enum dma_data_direction direction) +{ + BUG_ON(direction == DMA_NONE); + + frv_cache_wback_inv((unsigned long) ptr, (unsigned long) ptr + size); + + return virt_to_bus(ptr); +} + +EXPORT_SYMBOL(dma_map_single); + +int dma_map_sg(struct device *dev, struct scatterlist *sg, int nents, + enum dma_data_direction direction) +{ + int i; + + for (i=0; i<nents; i++) + frv_cache_wback_inv(sg_dma_address(&sg[i]), + sg_dma_address(&sg[i]) + sg_dma_len(&sg[i])); + + BUG_ON(direction == DMA_NONE); + + return nents; +} + +EXPORT_SYMBOL(dma_map_sg); + +dma_addr_t dma_map_page(struct device *dev, struct page *page, unsigned long offset, + size_t size, enum dma_data_direction direction) +{ + BUG_ON(direction == DMA_NONE); + flush_dcache_page(page); + return (dma_addr_t) page_to_phys(page) + offset; +} + +EXPORT_SYMBOL(dma_map_page); diff --git a/arch/frv/mb93090-mb00/pci-dma.c b/arch/frv/mb93090-mb00/pci-dma.c new file mode 100644 index 000000000..82478979a --- /dev/null +++ b/arch/frv/mb93090-mb00/pci-dma.c @@ -0,0 +1,91 @@ +/* pci-dma.c: Dynamic DMA mapping support for the FRV CPUs that have MMUs + * + * Copyright (C) 2004 Red Hat, Inc. All Rights Reserved. + * Written by David Howells (dhowells@redhat.com) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +#include <linux/types.h> +#include <linux/dma-mapping.h> +#include <linux/list.h> +#include <linux/pci.h> +#include <linux/export.h> +#include <linux/highmem.h> +#include <linux/scatterlist.h> +#include <asm/io.h> + +void *dma_alloc_coherent(struct device *hwdev, size_t size, dma_addr_t *dma_handle, gfp_t gfp) +{ + void *ret; + + ret = consistent_alloc(gfp, size, dma_handle); + if (ret) + memset(ret, 0, size); + + return ret; +} + +EXPORT_SYMBOL(dma_alloc_coherent); + +void dma_free_coherent(struct device *hwdev, size_t size, void *vaddr, dma_addr_t dma_handle) +{ + consistent_free(vaddr); +} + +EXPORT_SYMBOL(dma_free_coherent); + +dma_addr_t dma_map_single(struct device *dev, void *ptr, size_t size, + enum dma_data_direction direction) +{ + BUG_ON(direction == DMA_NONE); + + frv_cache_wback_inv((unsigned long) ptr, (unsigned long) ptr + size); + + return virt_to_bus(ptr); +} + +EXPORT_SYMBOL(dma_map_single); + +int dma_map_sg(struct device *dev, struct scatterlist *sg, int nents, + enum dma_data_direction direction) +{ + unsigned long dampr2; + void *vaddr; + int i; + + BUG_ON(direction == DMA_NONE); + + dampr2 = __get_DAMPR(2); + + for (i = 0; i < nents; i++) { + vaddr = kmap_atomic_primary(sg_page(&sg[i])); + + frv_dcache_writeback((unsigned long) vaddr, + (unsigned long) vaddr + PAGE_SIZE); + + } + + kunmap_atomic_primary(vaddr); + if (dampr2) { + __set_DAMPR(2, dampr2); + __set_IAMPR(2, dampr2); + } + + return nents; +} + +EXPORT_SYMBOL(dma_map_sg); + +dma_addr_t dma_map_page(struct device *dev, struct page *page, unsigned long offset, + size_t size, enum dma_data_direction direction) +{ + BUG_ON(direction == DMA_NONE); + flush_dcache_page(page); + return (dma_addr_t) page_to_phys(page) + offset; +} + +EXPORT_SYMBOL(dma_map_page); diff --git a/arch/frv/mb93090-mb00/pci-frv.c b/arch/frv/mb93090-mb00/pci-frv.c new file mode 100644 index 000000000..0635bd6c2 --- /dev/null +++ b/arch/frv/mb93090-mb00/pci-frv.c @@ -0,0 +1,196 @@ +/* pci-frv.c: low-level PCI access routines + * + * Copyright (C) 2003-5 Red Hat, Inc. All Rights Reserved. + * Written by David Howells (dhowells@redhat.com) + * - Derived from the i386 equivalent stuff + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +#include <linux/types.h> +#include <linux/kernel.h> +#include <linux/pci.h> +#include <linux/init.h> +#include <linux/ioport.h> +#include <linux/errno.h> + +#include "pci-frv.h" + +/* + * We need to avoid collisions with `mirrored' VGA ports + * and other strange ISA hardware, so we always want the + * addresses to be allocated in the 0x000-0x0ff region + * modulo 0x400. + * + * Why? Because some silly external IO cards only decode + * the low 10 bits of the IO address. The 0x00-0xff region + * is reserved for motherboard devices that decode all 16 + * bits, so it's ok to allocate at, say, 0x2800-0x28ff, + * but we want to try to avoid allocating at 0x2900-0x2bff + * which might have be mirrored at 0x0100-0x03ff.. + */ +resource_size_t +pcibios_align_resource(void *data, const struct resource *res, + resource_size_t size, resource_size_t align) +{ + resource_size_t start = res->start; + + if ((res->flags & IORESOURCE_IO) && (start & 0x300)) + start = (start + 0x3ff) & ~0x3ff; + + return start; +} + + +/* + * Handle resources of PCI devices. If the world were perfect, we could + * just allocate all the resource regions and do nothing more. It isn't. + * On the other hand, we cannot just re-allocate all devices, as it would + * require us to know lots of host bridge internals. So we attempt to + * keep as much of the original configuration as possible, but tweak it + * when it's found to be wrong. + * + * Known BIOS problems we have to work around: + * - I/O or memory regions not configured + * - regions configured, but not enabled in the command register + * - bogus I/O addresses above 64K used + * - expansion ROMs left enabled (this may sound harmless, but given + * the fact the PCI specs explicitly allow address decoders to be + * shared between expansion ROMs and other resource regions, it's + * at least dangerous) + * + * Our solution: + * (1) Allocate resources for all buses behind PCI-to-PCI bridges. + * This gives us fixed barriers on where we can allocate. + * (2) Allocate resources for all enabled devices. If there is + * a collision, just mark the resource as unallocated. Also + * disable expansion ROMs during this step. + * (3) Try to allocate resources for disabled devices. If the + * resources were assigned correctly, everything goes well, + * if they weren't, they won't disturb allocation of other + * resources. + * (4) Assign new addresses to resources which were either + * not configured at all or misconfigured. If explicitly + * requested by the user, configure expansion ROM address + * as well. + */ + +static void __init pcibios_allocate_bus_resources(struct list_head *bus_list) +{ + struct list_head *ln; + struct pci_bus *bus; + struct pci_dev *dev; + int idx; + struct resource *r; + + /* Depth-First Search on bus tree */ + for (ln=bus_list->next; ln != bus_list; ln=ln->next) { + bus = list_entry(ln, struct pci_bus, node); + if ((dev = bus->self)) { + for (idx = PCI_BRIDGE_RESOURCES; idx < PCI_NUM_RESOURCES; idx++) { + r = &dev->resource[idx]; + if (!r->start) + continue; + pci_claim_bridge_resource(dev, idx); + } + } + pcibios_allocate_bus_resources(&bus->children); + } +} + +static void __init pcibios_allocate_resources(int pass) +{ + struct pci_dev *dev = NULL; + int idx, disabled; + u16 command; + struct resource *r; + + for_each_pci_dev(dev) { + pci_read_config_word(dev, PCI_COMMAND, &command); + for(idx = 0; idx < 6; idx++) { + r = &dev->resource[idx]; + if (r->parent) /* Already allocated */ + continue; + if (!r->start) /* Address not assigned at all */ + continue; + if (r->flags & IORESOURCE_IO) + disabled = !(command & PCI_COMMAND_IO); + else + disabled = !(command & PCI_COMMAND_MEMORY); + if (pass == disabled) { + DBG("PCI: Resource %08lx-%08lx (f=%lx, d=%d, p=%d)\n", + r->start, r->end, r->flags, disabled, pass); + if (pci_claim_resource(dev, idx) < 0) { + /* We'll assign a new address later */ + r->end -= r->start; + r->start = 0; + } + } + } + if (!pass) { + r = &dev->resource[PCI_ROM_RESOURCE]; + if (r->flags & IORESOURCE_ROM_ENABLE) { + /* Turn the ROM off, leave the resource region, but keep it unregistered. */ + u32 reg; + DBG("PCI: Switching off ROM of %s\n", pci_name(dev)); + r->flags &= ~IORESOURCE_ROM_ENABLE; + pci_read_config_dword(dev, dev->rom_base_reg, ®); + pci_write_config_dword(dev, dev->rom_base_reg, reg & ~PCI_ROM_ADDRESS_ENABLE); + } + } + } +} + +static void __init pcibios_assign_resources(void) +{ + struct pci_dev *dev = NULL; + int idx; + struct resource *r; + + for_each_pci_dev(dev) { + int class = dev->class >> 8; + + /* Don't touch classless devices and host bridges */ + if (!class || class == PCI_CLASS_BRIDGE_HOST) + continue; + + for(idx=0; idx<6; idx++) { + r = &dev->resource[idx]; + + /* + * Don't touch IDE controllers and I/O ports of video cards! + */ + if ((class == PCI_CLASS_STORAGE_IDE && idx < 4) || + (class == PCI_CLASS_DISPLAY_VGA && (r->flags & IORESOURCE_IO))) + continue; + + /* + * We shall assign a new address to this resource, either because + * the BIOS forgot to do so or because we have decided the old + * address was unusable for some reason. + */ + if (!r->start && r->end) + pci_assign_resource(dev, idx); + } + + if (pci_probe & PCI_ASSIGN_ROMS) { + r = &dev->resource[PCI_ROM_RESOURCE]; + r->end -= r->start; + r->start = 0; + if (r->end) + pci_assign_resource(dev, PCI_ROM_RESOURCE); + } + } +} + +void __init pcibios_resource_survey(void) +{ + DBG("PCI: Allocating resources\n"); + pcibios_allocate_bus_resources(&pci_root_buses); + pcibios_allocate_resources(0); + pcibios_allocate_resources(1); + pcibios_assign_resources(); +} diff --git a/arch/frv/mb93090-mb00/pci-frv.h b/arch/frv/mb93090-mb00/pci-frv.h new file mode 100644 index 000000000..a7e487fe7 --- /dev/null +++ b/arch/frv/mb93090-mb00/pci-frv.h @@ -0,0 +1,40 @@ +/* + * Low-Level PCI Access for FRV machines. + * + * (c) 1999 Martin Mares <mj@ucw.cz> + */ + +#include <asm/sections.h> + +#undef DEBUG + +#ifdef DEBUG +#define DBG(x...) printk(x) +#else +#define DBG(x...) +#endif + +#define PCI_PROBE_BIOS 0x0001 +#define PCI_PROBE_CONF1 0x0002 +#define PCI_PROBE_CONF2 0x0004 +#define PCI_NO_CHECKS 0x0400 +#define PCI_ASSIGN_ROMS 0x1000 +#define PCI_BIOS_IRQ_SCAN 0x2000 +#define PCI_ASSIGN_ALL_BUSSES 0x4000 + +extern unsigned int __nongpreldata pci_probe; + +/* pci-frv.c */ + +void pcibios_resource_survey(void); + +/* pci-vdk.c */ + +extern struct pci_ops *__nongpreldata pci_root_ops; + +/* pci-irq.c */ +extern unsigned int pcibios_irq_mask; + +void pcibios_irq_init(void); +void pcibios_fixup_irqs(void); +void pcibios_enable_irq(struct pci_dev *dev); diff --git a/arch/frv/mb93090-mb00/pci-irq.c b/arch/frv/mb93090-mb00/pci-irq.c new file mode 100644 index 000000000..1c35c93f9 --- /dev/null +++ b/arch/frv/mb93090-mb00/pci-irq.c @@ -0,0 +1,61 @@ +/* pci-irq.c: PCI IRQ routing on the FRV motherboard + * + * Copyright (C) 2003 Red Hat, Inc. All Rights Reserved. + * Written by David Howells (dhowells@redhat.com) + * derived from: arch/i386/kernel/pci-irq.c: (c) 1999--2000 Martin Mares <mj@suse.cz> + */ + +#include <linux/types.h> +#include <linux/kernel.h> +#include <linux/pci.h> +#include <linux/init.h> +#include <linux/interrupt.h> +#include <linux/irq.h> + +#include <asm/io.h> +#include <asm/smp.h> + +#include "pci-frv.h" + +/* + * DEVICE DEVNO INT#A INT#B INT#C INT#D + * ======= ======= ======= ======= ======= ======= + * MB86943 0 fpga.10 - - - + * RTL8029 16 fpga.12 - - - + * SLOT 1 19 fpga.6 fpga.5 fpga.4 fpga.3 + * SLOT 2 18 fpga.5 fpga.4 fpga.3 fpga.6 + * SLOT 3 17 fpga.4 fpga.3 fpga.6 fpga.5 + * + */ + +static const uint8_t __initconst pci_bus0_irq_routing[32][4] = { + [0 ] = { IRQ_FPGA_MB86943_PCI_INTA }, + [16] = { IRQ_FPGA_RTL8029_INTA }, + [17] = { IRQ_FPGA_PCI_INTC, IRQ_FPGA_PCI_INTD, IRQ_FPGA_PCI_INTA, IRQ_FPGA_PCI_INTB }, + [18] = { IRQ_FPGA_PCI_INTB, IRQ_FPGA_PCI_INTC, IRQ_FPGA_PCI_INTD, IRQ_FPGA_PCI_INTA }, + [19] = { IRQ_FPGA_PCI_INTA, IRQ_FPGA_PCI_INTB, IRQ_FPGA_PCI_INTC, IRQ_FPGA_PCI_INTD }, +}; + +void __init pcibios_irq_init(void) +{ +} + +void __init pcibios_fixup_irqs(void) +{ + struct pci_dev *dev = NULL; + uint8_t line, pin; + + for_each_pci_dev(dev) { + pci_read_config_byte(dev, PCI_INTERRUPT_PIN, &pin); + if (pin) { + dev->irq = pci_bus0_irq_routing[PCI_SLOT(dev->devfn)][pin - 1]; + pci_write_config_byte(dev, PCI_INTERRUPT_LINE, dev->irq); + } + pci_read_config_byte(dev, PCI_INTERRUPT_LINE, &line); + } +} + +void pcibios_enable_irq(struct pci_dev *dev) +{ + pci_write_config_byte(dev, PCI_INTERRUPT_LINE, dev->irq); +} diff --git a/arch/frv/mb93090-mb00/pci-vdk.c b/arch/frv/mb93090-mb00/pci-vdk.c new file mode 100644 index 000000000..f211839e2 --- /dev/null +++ b/arch/frv/mb93090-mb00/pci-vdk.c @@ -0,0 +1,419 @@ +/* pci-vdk.c: MB93090-MB00 (VDK) PCI support + * + * Copyright (C) 2003, 2004 Red Hat, Inc. All Rights Reserved. + * Written by David Howells (dhowells@redhat.com) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +#include <linux/types.h> +#include <linux/kernel.h> +#include <linux/sched.h> +#include <linux/pci.h> +#include <linux/init.h> +#include <linux/ioport.h> +#include <linux/delay.h> + +#include <asm/segment.h> +#include <asm/io.h> +#include <asm/mb-regs.h> +#include <asm/mb86943a.h> +#include "pci-frv.h" + +unsigned int __nongpreldata pci_probe = 1; + +struct pci_ops *__nongpreldata pci_root_ops; + +/* + * The accessible PCI window does not cover the entire CPU address space, but + * there are devices we want to access outside of that window, so we need to + * insert specific PCI bus resources instead of using the platform-level bus + * resources directly for the PCI root bus. + * + * These are configured and inserted by pcibios_init() and are attached to the + * root bus by pcibios_fixup_bus(). + */ +static struct resource pci_ioport_resource = { + .name = "PCI IO", + .start = 0, + .end = IO_SPACE_LIMIT, + .flags = IORESOURCE_IO, +}; + +static struct resource pci_iomem_resource = { + .name = "PCI mem", + .start = 0, + .end = -1, + .flags = IORESOURCE_MEM, +}; + +/* + * Functions for accessing PCI configuration space + */ + +#define CONFIG_CMD(bus, dev, where) \ + (0x80000000 | (bus->number << 16) | (devfn << 8) | (where & ~3)) + +#define __set_PciCfgAddr(A) writel((A), (volatile void __iomem *) __region_CS1 + 0x80) + +#define __get_PciCfgDataB(A) readb((volatile void __iomem *) __region_CS1 + 0x88 + ((A) & 3)) +#define __get_PciCfgDataW(A) readw((volatile void __iomem *) __region_CS1 + 0x88 + ((A) & 2)) +#define __get_PciCfgDataL(A) readl((volatile void __iomem *) __region_CS1 + 0x88) + +#define __set_PciCfgDataB(A,V) \ + writeb((V), (volatile void __iomem *) __region_CS1 + 0x88 + (3 - ((A) & 3))) + +#define __set_PciCfgDataW(A,V) \ + writew((V), (volatile void __iomem *) __region_CS1 + 0x88 + (2 - ((A) & 2))) + +#define __set_PciCfgDataL(A,V) \ + writel((V), (volatile void __iomem *) __region_CS1 + 0x88) + +#define __get_PciBridgeDataB(A) readb((volatile void __iomem *) __region_CS1 + 0x800 + (A)) +#define __get_PciBridgeDataW(A) readw((volatile void __iomem *) __region_CS1 + 0x800 + (A)) +#define __get_PciBridgeDataL(A) readl((volatile void __iomem *) __region_CS1 + 0x800 + (A)) + +#define __set_PciBridgeDataB(A,V) writeb((V), (volatile void __iomem *) __region_CS1 + 0x800 + (A)) +#define __set_PciBridgeDataW(A,V) writew((V), (volatile void __iomem *) __region_CS1 + 0x800 + (A)) +#define __set_PciBridgeDataL(A,V) writel((V), (volatile void __iomem *) __region_CS1 + 0x800 + (A)) + +static inline int __query(const struct pci_dev *dev) +{ +// return dev->bus->number==0 && (dev->devfn==PCI_DEVFN(0,0)); +// return dev->bus->number==1; +// return dev->bus->number==0 && +// (dev->devfn==PCI_DEVFN(2,0) || dev->devfn==PCI_DEVFN(3,0)); + return 0; +} + +/*****************************************************************************/ +/* + * + */ +static int pci_frv_read_config(struct pci_bus *bus, unsigned int devfn, int where, int size, + u32 *val) +{ + u32 _value; + + if (bus->number == 0 && devfn == PCI_DEVFN(0, 0)) { + _value = __get_PciBridgeDataL(where & ~3); + } + else { + __set_PciCfgAddr(CONFIG_CMD(bus, devfn, where)); + _value = __get_PciCfgDataL(where & ~3); + } + + switch (size) { + case 1: + _value = _value >> ((where & 3) * 8); + break; + + case 2: + _value = _value >> ((where & 2) * 8); + break; + + case 4: + break; + + default: + BUG(); + } + + *val = _value; + return PCIBIOS_SUCCESSFUL; +} + +static int pci_frv_write_config(struct pci_bus *bus, unsigned int devfn, int where, int size, + u32 value) +{ + switch (size) { + case 1: + if (bus->number == 0 && devfn == PCI_DEVFN(0, 0)) { + __set_PciBridgeDataB(where, value); + } + else { + __set_PciCfgAddr(CONFIG_CMD(bus, devfn, where)); + __set_PciCfgDataB(where, value); + } + break; + + case 2: + if (bus->number == 0 && devfn == PCI_DEVFN(0, 0)) { + __set_PciBridgeDataW(where, value); + } + else { + __set_PciCfgAddr(CONFIG_CMD(bus, devfn, where)); + __set_PciCfgDataW(where, value); + } + break; + + case 4: + if (bus->number == 0 && devfn == PCI_DEVFN(0, 0)) { + __set_PciBridgeDataL(where, value); + } + else { + __set_PciCfgAddr(CONFIG_CMD(bus, devfn, where)); + __set_PciCfgDataL(where, value); + } + break; + + default: + BUG(); + } + + return PCIBIOS_SUCCESSFUL; +} + +static struct pci_ops pci_direct_frv = { + .read = pci_frv_read_config, + .write = pci_frv_write_config, +}; + +/* + * Before we decide to use direct hardware access mechanisms, we try to do some + * trivial checks to ensure it at least _seems_ to be working -- we just test + * whether bus 00 contains a host bridge (this is similar to checking + * techniques used in XFree86, but ours should be more reliable since we + * attempt to make use of direct access hints provided by the PCI BIOS). + * + * This should be close to trivial, but it isn't, because there are buggy + * chipsets (yes, you guessed it, by Intel and Compaq) that have no class ID. + */ +static int __init pci_sanity_check(struct pci_ops *o) +{ + struct pci_bus bus; /* Fake bus and device */ + u32 id; + + bus.number = 0; + + if (o->read(&bus, 0, PCI_VENDOR_ID, 4, &id) == PCIBIOS_SUCCESSFUL) { + printk("PCI: VDK Bridge device:vendor: %08x\n", id); + if (id == 0x200e10cf) + return 1; + } + + printk("PCI: VDK Bridge: Sanity check failed\n"); + return 0; +} + +static struct pci_ops * __init pci_check_direct(void) +{ + unsigned long flags; + + local_irq_save(flags); + + /* check if access works */ + if (pci_sanity_check(&pci_direct_frv)) { + local_irq_restore(flags); + printk("PCI: Using configuration frv\n"); +// request_mem_region(0xBE040000, 256, "FRV bridge"); +// request_mem_region(0xBFFFFFF4, 12, "PCI frv"); + return &pci_direct_frv; + } + + local_irq_restore(flags); + return NULL; +} + +/* + * Exceptions for specific devices. Usually work-arounds for fatal design flaws. + */ + +static void __init pci_fixup_umc_ide(struct pci_dev *d) +{ + /* + * UM8886BF IDE controller sets region type bits incorrectly, + * therefore they look like memory despite of them being I/O. + */ + int i; + + printk("PCI: Fixing base address flags for device %s\n", pci_name(d)); + for(i=0; i<4; i++) + d->resource[i].flags |= PCI_BASE_ADDRESS_SPACE_IO; +} + +static void pci_fixup_ide_bases(struct pci_dev *d) +{ + int i; + + /* + * PCI IDE controllers use non-standard I/O port decoding, respect it. + */ + if ((d->class >> 8) != PCI_CLASS_STORAGE_IDE) + return; + printk("PCI: IDE base address fixup for %s\n", pci_name(d)); + for(i=0; i<4; i++) { + struct resource *r = &d->resource[i]; + if ((r->start & ~0x80) == 0x374) { + r->start |= 2; + r->end = r->start; + } + } +} + +static void pci_fixup_ide_trash(struct pci_dev *d) +{ + int i; + + /* + * There exist PCI IDE controllers which have utter garbage + * in first four base registers. Ignore that. + */ + printk("PCI: IDE base address trash cleared for %s\n", pci_name(d)); + for(i=0; i<4; i++) + d->resource[i].start = d->resource[i].end = d->resource[i].flags = 0; +} + +static void pci_fixup_latency(struct pci_dev *d) +{ + /* + * SiS 5597 and 5598 chipsets require latency timer set to + * at most 32 to avoid lockups. + */ + DBG("PCI: Setting max latency to 32\n"); + pcibios_max_latency = 32; +} + +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_UMC, PCI_DEVICE_ID_UMC_UM8886BF, pci_fixup_umc_ide); +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_5513, pci_fixup_ide_trash); +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_5597, pci_fixup_latency); +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_5598, pci_fixup_latency); +DECLARE_PCI_FIXUP_HEADER(PCI_ANY_ID, PCI_ANY_ID, pci_fixup_ide_bases); + +/* + * Called after each bus is probed, but before its children + * are examined. + */ + +void pcibios_fixup_bus(struct pci_bus *bus) +{ +#if 0 + printk("### PCIBIOS_FIXUP_BUS(%d)\n",bus->number); +#endif + + pci_read_bridge_bases(bus); + + if (bus->number == 0) { + struct pci_dev *dev; + list_for_each_entry(dev, &bus->devices, bus_list) { + if (dev->devfn == 0) { + dev->resource[0].start = 0; + dev->resource[0].end = 0; + } + } + } +} + +/* + * Initialization. Try all known PCI access methods. Note that we support + * using both PCI BIOS and direct access: in such cases, we use I/O ports + * to access config space, but we still keep BIOS order of cards to be + * compatible with 2.0.X. This should go away some day. + */ + +int __init pcibios_init(void) +{ + struct pci_bus *bus; + struct pci_ops *dir = NULL; + LIST_HEAD(resources); + + if (!mb93090_mb00_detected) + return -ENXIO; + + __reg_MB86943_sl_ctl |= MB86943_SL_CTL_DRCT_MASTER_SWAP | MB86943_SL_CTL_DRCT_SLAVE_SWAP; + + __reg_MB86943_ecs_base(1) = ((__region_CS2 + 0x01000000) >> 9) | 0x08000000; + __reg_MB86943_ecs_base(2) = ((__region_CS2 + 0x00000000) >> 9) | 0x08000000; + + *(volatile uint32_t *) (__region_CS1 + 0x848) = 0xe0000000; + *(volatile uint32_t *) (__region_CS1 + 0x8b8) = 0x00000000; + + __reg_MB86943_sl_pci_io_base = (__region_CS2 + 0x04000000) >> 9; + __reg_MB86943_sl_pci_mem_base = (__region_CS2 + 0x08000000) >> 9; + __reg_MB86943_pci_sl_io_base = __region_CS2 + 0x04000000; + __reg_MB86943_pci_sl_mem_base = __region_CS2 + 0x08000000; + mb(); + + /* enable PCI arbitration */ + __reg_MB86943_pci_arbiter = MB86943_PCIARB_EN; + + pci_ioport_resource.start = (__reg_MB86943_sl_pci_io_base << 9) & 0xfffffc00; + pci_ioport_resource.end = (__reg_MB86943_sl_pci_io_range << 9) | 0x3ff; + pci_ioport_resource.end += pci_ioport_resource.start; + + printk("PCI IO window: %08llx-%08llx\n", + (unsigned long long) pci_ioport_resource.start, + (unsigned long long) pci_ioport_resource.end); + + pci_iomem_resource.start = (__reg_MB86943_sl_pci_mem_base << 9) & 0xfffffc00; + pci_iomem_resource.end = (__reg_MB86943_sl_pci_mem_range << 9) | 0x3ff; + pci_iomem_resource.end += pci_iomem_resource.start; + + /* Reserve somewhere to write to flush posted writes. This is used by + * __flush_PCI_writes() from asm/io.h to force the write FIFO in the + * CPU-PCI bridge to flush as this doesn't happen automatically when a + * read is performed on the MB93090 development kit motherboard. + */ + pci_iomem_resource.start += 0x400; + + printk("PCI MEM window: %08llx-%08llx\n", + (unsigned long long) pci_iomem_resource.start, + (unsigned long long) pci_iomem_resource.end); + printk("PCI DMA memory: %08lx-%08lx\n", + dma_coherent_mem_start, dma_coherent_mem_end); + + if (insert_resource(&iomem_resource, &pci_iomem_resource) < 0) + panic("Unable to insert PCI IOMEM resource\n"); + if (insert_resource(&ioport_resource, &pci_ioport_resource) < 0) + panic("Unable to insert PCI IOPORT resource\n"); + + if (!pci_probe) + return -ENXIO; + + dir = pci_check_direct(); + if (dir) + pci_root_ops = dir; + else { + printk("PCI: No PCI bus detected\n"); + return -ENXIO; + } + + printk("PCI: Probing PCI hardware\n"); + pci_add_resource(&resources, &pci_ioport_resource); + pci_add_resource(&resources, &pci_iomem_resource); + bus = pci_scan_root_bus(NULL, 0, pci_root_ops, NULL, &resources); + + pcibios_irq_init(); + pcibios_fixup_irqs(); + pcibios_resource_survey(); + if (!bus) + return 0; + + pci_bus_add_devices(bus); + return 0; +} + +arch_initcall(pcibios_init); + +char * __init pcibios_setup(char *str) +{ + if (!strcmp(str, "off")) { + pci_probe = 0; + return NULL; + } + return str; +} + +int pcibios_enable_device(struct pci_dev *dev, int mask) +{ + int err; + + if ((err = pci_enable_resources(dev, mask)) < 0) + return err; + if (!dev->msi_enabled) + pcibios_enable_irq(dev); + return 0; +} |