diff options
Diffstat (limited to 'arch/ia64/kernel/sal.c')
-rw-r--r-- | arch/ia64/kernel/sal.c | 405 |
1 files changed, 405 insertions, 0 deletions
diff --git a/arch/ia64/kernel/sal.c b/arch/ia64/kernel/sal.c new file mode 100644 index 000000000..0464173ea --- /dev/null +++ b/arch/ia64/kernel/sal.c @@ -0,0 +1,405 @@ +/* + * System Abstraction Layer (SAL) interface routines. + * + * Copyright (C) 1998, 1999, 2001, 2003 Hewlett-Packard Co + * David Mosberger-Tang <davidm@hpl.hp.com> + * Copyright (C) 1999 VA Linux Systems + * Copyright (C) 1999 Walt Drummond <drummond@valinux.com> + */ + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/module.h> +#include <linux/spinlock.h> +#include <linux/string.h> + +#include <asm/delay.h> +#include <asm/page.h> +#include <asm/sal.h> +#include <asm/pal.h> + + __cacheline_aligned DEFINE_SPINLOCK(sal_lock); +unsigned long sal_platform_features; + +unsigned short sal_revision; +unsigned short sal_version; + +#define SAL_MAJOR(x) ((x) >> 8) +#define SAL_MINOR(x) ((x) & 0xff) + +static struct { + void *addr; /* function entry point */ + void *gpval; /* gp value to use */ +} pdesc; + +static long +default_handler (void) +{ + return -1; +} + +ia64_sal_handler ia64_sal = (ia64_sal_handler) default_handler; +ia64_sal_desc_ptc_t *ia64_ptc_domain_info; + +const char * +ia64_sal_strerror (long status) +{ + const char *str; + switch (status) { + case 0: str = "Call completed without error"; break; + case 1: str = "Effect a warm boot of the system to complete " + "the update"; break; + case -1: str = "Not implemented"; break; + case -2: str = "Invalid argument"; break; + case -3: str = "Call completed with error"; break; + case -4: str = "Virtual address not registered"; break; + case -5: str = "No information available"; break; + case -6: str = "Insufficient space to add the entry"; break; + case -7: str = "Invalid entry_addr value"; break; + case -8: str = "Invalid interrupt vector"; break; + case -9: str = "Requested memory not available"; break; + case -10: str = "Unable to write to the NVM device"; break; + case -11: str = "Invalid partition type specified"; break; + case -12: str = "Invalid NVM_Object id specified"; break; + case -13: str = "NVM_Object already has the maximum number " + "of partitions"; break; + case -14: str = "Insufficient space in partition for the " + "requested write sub-function"; break; + case -15: str = "Insufficient data buffer space for the " + "requested read record sub-function"; break; + case -16: str = "Scratch buffer required for the write/delete " + "sub-function"; break; + case -17: str = "Insufficient space in the NVM_Object for the " + "requested create sub-function"; break; + case -18: str = "Invalid value specified in the partition_rec " + "argument"; break; + case -19: str = "Record oriented I/O not supported for this " + "partition"; break; + case -20: str = "Bad format of record to be written or " + "required keyword variable not " + "specified"; break; + default: str = "Unknown SAL status code"; break; + } + return str; +} + +void __init +ia64_sal_handler_init (void *entry_point, void *gpval) +{ + /* fill in the SAL procedure descriptor and point ia64_sal to it: */ + pdesc.addr = entry_point; + pdesc.gpval = gpval; + ia64_sal = (ia64_sal_handler) &pdesc; +} + +static void __init +check_versions (struct ia64_sal_systab *systab) +{ + sal_revision = (systab->sal_rev_major << 8) | systab->sal_rev_minor; + sal_version = (systab->sal_b_rev_major << 8) | systab->sal_b_rev_minor; + + /* Check for broken firmware */ + if ((sal_revision == SAL_VERSION_CODE(49, 29)) + && (sal_version == SAL_VERSION_CODE(49, 29))) + { + /* + * Old firmware for zx2000 prototypes have this weird version number, + * reset it to something sane. + */ + sal_revision = SAL_VERSION_CODE(2, 8); + sal_version = SAL_VERSION_CODE(0, 0); + } + + if (ia64_platform_is("sn2") && (sal_revision == SAL_VERSION_CODE(2, 9))) + /* + * SGI Altix has hard-coded version 2.9 in their prom + * but they actually implement 3.2, so let's fix it here. + */ + sal_revision = SAL_VERSION_CODE(3, 2); +} + +static void __init +sal_desc_entry_point (void *p) +{ + struct ia64_sal_desc_entry_point *ep = p; + ia64_pal_handler_init(__va(ep->pal_proc)); + ia64_sal_handler_init(__va(ep->sal_proc), __va(ep->gp)); +} + +#ifdef CONFIG_SMP +static void __init +set_smp_redirect (int flag) +{ +#ifndef CONFIG_HOTPLUG_CPU + if (no_int_routing) + smp_int_redirect &= ~flag; + else + smp_int_redirect |= flag; +#else + /* + * For CPU Hotplug we dont want to do any chipset supported + * interrupt redirection. The reason is this would require that + * All interrupts be stopped and hard bind the irq to a cpu. + * Later when the interrupt is fired we need to set the redir hint + * on again in the vector. This is cumbersome for something that the + * user mode irq balancer will solve anyways. + */ + no_int_routing=1; + smp_int_redirect &= ~flag; +#endif +} +#else +#define set_smp_redirect(flag) do { } while (0) +#endif + +static void __init +sal_desc_platform_feature (void *p) +{ + struct ia64_sal_desc_platform_feature *pf = p; + sal_platform_features = pf->feature_mask; + + printk(KERN_INFO "SAL Platform features:"); + if (!sal_platform_features) { + printk(" None\n"); + return; + } + + if (sal_platform_features & IA64_SAL_PLATFORM_FEATURE_BUS_LOCK) + printk(" BusLock"); + if (sal_platform_features & IA64_SAL_PLATFORM_FEATURE_IRQ_REDIR_HINT) { + printk(" IRQ_Redirection"); + set_smp_redirect(SMP_IRQ_REDIRECTION); + } + if (sal_platform_features & IA64_SAL_PLATFORM_FEATURE_IPI_REDIR_HINT) { + printk(" IPI_Redirection"); + set_smp_redirect(SMP_IPI_REDIRECTION); + } + if (sal_platform_features & IA64_SAL_PLATFORM_FEATURE_ITC_DRIFT) + printk(" ITC_Drift"); + printk("\n"); +} + +#ifdef CONFIG_SMP +static void __init +sal_desc_ap_wakeup (void *p) +{ + struct ia64_sal_desc_ap_wakeup *ap = p; + + switch (ap->mechanism) { + case IA64_SAL_AP_EXTERNAL_INT: + ap_wakeup_vector = ap->vector; + printk(KERN_INFO "SAL: AP wakeup using external interrupt " + "vector 0x%lx\n", ap_wakeup_vector); + break; + default: + printk(KERN_ERR "SAL: AP wakeup mechanism unsupported!\n"); + break; + } +} + +static void __init +chk_nointroute_opt(void) +{ + char *cp; + + for (cp = boot_command_line; *cp; ) { + if (memcmp(cp, "nointroute", 10) == 0) { + no_int_routing = 1; + printk ("no_int_routing on\n"); + break; + } else { + while (*cp != ' ' && *cp) + ++cp; + while (*cp == ' ') + ++cp; + } + } +} + +#else +static void __init sal_desc_ap_wakeup(void *p) { } +#endif + +/* + * HP rx5670 firmware polls for interrupts during SAL_CACHE_FLUSH by reading + * cr.ivr, but it never writes cr.eoi. This leaves any interrupt marked as + * "in-service" and masks other interrupts of equal or lower priority. + * + * HP internal defect reports: F1859, F2775, F3031. + */ +static int sal_cache_flush_drops_interrupts; + +static int __init +force_pal_cache_flush(char *str) +{ + sal_cache_flush_drops_interrupts = 1; + return 0; +} +early_param("force_pal_cache_flush", force_pal_cache_flush); + +void __init +check_sal_cache_flush (void) +{ + unsigned long flags; + int cpu; + u64 vector, cache_type = 3; + struct ia64_sal_retval isrv; + + if (sal_cache_flush_drops_interrupts) + return; + + cpu = get_cpu(); + local_irq_save(flags); + + /* + * Send ourselves a timer interrupt, wait until it's reported, and see + * if SAL_CACHE_FLUSH drops it. + */ + platform_send_ipi(cpu, IA64_TIMER_VECTOR, IA64_IPI_DM_INT, 0); + + while (!ia64_get_irr(IA64_TIMER_VECTOR)) + cpu_relax(); + + SAL_CALL(isrv, SAL_CACHE_FLUSH, cache_type, 0, 0, 0, 0, 0, 0); + + if (isrv.status) + printk(KERN_ERR "SAL_CAL_FLUSH failed with %ld\n", isrv.status); + + if (ia64_get_irr(IA64_TIMER_VECTOR)) { + vector = ia64_get_ivr(); + ia64_eoi(); + WARN_ON(vector != IA64_TIMER_VECTOR); + } else { + sal_cache_flush_drops_interrupts = 1; + printk(KERN_ERR "SAL: SAL_CACHE_FLUSH drops interrupts; " + "PAL_CACHE_FLUSH will be used instead\n"); + ia64_eoi(); + } + + local_irq_restore(flags); + put_cpu(); +} + +s64 +ia64_sal_cache_flush (u64 cache_type) +{ + struct ia64_sal_retval isrv; + + if (sal_cache_flush_drops_interrupts) { + unsigned long flags; + u64 progress; + s64 rc; + + progress = 0; + local_irq_save(flags); + rc = ia64_pal_cache_flush(cache_type, + PAL_CACHE_FLUSH_INVALIDATE, &progress, NULL); + local_irq_restore(flags); + return rc; + } + + SAL_CALL(isrv, SAL_CACHE_FLUSH, cache_type, 0, 0, 0, 0, 0, 0); + return isrv.status; +} +EXPORT_SYMBOL_GPL(ia64_sal_cache_flush); + +void __init +ia64_sal_init (struct ia64_sal_systab *systab) +{ + char *p; + int i; + + if (!systab) { + printk(KERN_WARNING "Hmm, no SAL System Table.\n"); + return; + } + + if (strncmp(systab->signature, "SST_", 4) != 0) + printk(KERN_ERR "bad signature in system table!"); + + check_versions(systab); +#ifdef CONFIG_SMP + chk_nointroute_opt(); +#endif + + /* revisions are coded in BCD, so %x does the job for us */ + printk(KERN_INFO "SAL %x.%x: %.32s %.32s%sversion %x.%x\n", + SAL_MAJOR(sal_revision), SAL_MINOR(sal_revision), + systab->oem_id, systab->product_id, + systab->product_id[0] ? " " : "", + SAL_MAJOR(sal_version), SAL_MINOR(sal_version)); + + p = (char *) (systab + 1); + for (i = 0; i < systab->entry_count; i++) { + /* + * The first byte of each entry type contains the type + * descriptor. + */ + switch (*p) { + case SAL_DESC_ENTRY_POINT: + sal_desc_entry_point(p); + break; + case SAL_DESC_PLATFORM_FEATURE: + sal_desc_platform_feature(p); + break; + case SAL_DESC_PTC: + ia64_ptc_domain_info = (ia64_sal_desc_ptc_t *)p; + break; + case SAL_DESC_AP_WAKEUP: + sal_desc_ap_wakeup(p); + break; + } + p += SAL_DESC_SIZE(*p); + } + +} + +int +ia64_sal_oemcall(struct ia64_sal_retval *isrvp, u64 oemfunc, u64 arg1, + u64 arg2, u64 arg3, u64 arg4, u64 arg5, u64 arg6, u64 arg7) +{ + if (oemfunc < IA64_SAL_OEMFUNC_MIN || oemfunc > IA64_SAL_OEMFUNC_MAX) + return -1; + SAL_CALL(*isrvp, oemfunc, arg1, arg2, arg3, arg4, arg5, arg6, arg7); + return 0; +} +EXPORT_SYMBOL(ia64_sal_oemcall); + +int +ia64_sal_oemcall_nolock(struct ia64_sal_retval *isrvp, u64 oemfunc, u64 arg1, + u64 arg2, u64 arg3, u64 arg4, u64 arg5, u64 arg6, + u64 arg7) +{ + if (oemfunc < IA64_SAL_OEMFUNC_MIN || oemfunc > IA64_SAL_OEMFUNC_MAX) + return -1; + SAL_CALL_NOLOCK(*isrvp, oemfunc, arg1, arg2, arg3, arg4, arg5, arg6, + arg7); + return 0; +} +EXPORT_SYMBOL(ia64_sal_oemcall_nolock); + +int +ia64_sal_oemcall_reentrant(struct ia64_sal_retval *isrvp, u64 oemfunc, + u64 arg1, u64 arg2, u64 arg3, u64 arg4, u64 arg5, + u64 arg6, u64 arg7) +{ + if (oemfunc < IA64_SAL_OEMFUNC_MIN || oemfunc > IA64_SAL_OEMFUNC_MAX) + return -1; + SAL_CALL_REENTRANT(*isrvp, oemfunc, arg1, arg2, arg3, arg4, arg5, arg6, + arg7); + return 0; +} +EXPORT_SYMBOL(ia64_sal_oemcall_reentrant); + +long +ia64_sal_freq_base (unsigned long which, unsigned long *ticks_per_second, + unsigned long *drift_info) +{ + struct ia64_sal_retval isrv; + + SAL_CALL(isrv, SAL_FREQ_BASE, which, 0, 0, 0, 0, 0, 0); + *ticks_per_second = isrv.v0; + *drift_info = isrv.v1; + return isrv.status; +} +EXPORT_SYMBOL_GPL(ia64_sal_freq_base); |