diff options
Diffstat (limited to 'arch/m32r/platforms')
35 files changed, 7002 insertions, 0 deletions
diff --git a/arch/m32r/platforms/Makefile b/arch/m32r/platforms/Makefile new file mode 100644 index 000000000..da03e1a8f --- /dev/null +++ b/arch/m32r/platforms/Makefile @@ -0,0 +1,9 @@ +# arch/m32r/platforms/Makefile +obj-$(CONFIG_PLAT_M32104UT) += m32104ut/ +obj-$(CONFIG_PLAT_M32700UT) += m32700ut/ +obj-$(CONFIG_PLAT_MAPPI) += mappi/ +obj-$(CONFIG_PLAT_MAPPI2) += mappi2/ +obj-$(CONFIG_PLAT_MAPPI3) += mappi3/ +obj-$(CONFIG_PLAT_OAKS32R) += oaks32r/ +obj-$(CONFIG_PLAT_OPSPUT) += opsput/ +obj-$(CONFIG_PLAT_USRV) += usrv/ diff --git a/arch/m32r/platforms/m32104ut/Makefile b/arch/m32r/platforms/m32104ut/Makefile new file mode 100644 index 000000000..0de59084f --- /dev/null +++ b/arch/m32r/platforms/m32104ut/Makefile @@ -0,0 +1 @@ +obj-y := setup.o io.o diff --git a/arch/m32r/platforms/m32104ut/io.c b/arch/m32r/platforms/m32104ut/io.c new file mode 100644 index 000000000..e5d8be6fb --- /dev/null +++ b/arch/m32r/platforms/m32104ut/io.c @@ -0,0 +1,297 @@ +/* + * linux/arch/m32r/platforms/m32104ut/io.c + * + * Typical I/O routines for M32104UT board. + * + * Copyright (c) 2001-2005 Hiroyuki Kondo, Hirokazu Takata, + * Hitoshi Yamamoto, Mamoru Sakugawa, + * Naoto Sugai, Hayato Fujiwara + */ + +#include <asm/m32r.h> +#include <asm/page.h> +#include <asm/io.h> +#include <asm/byteorder.h> + +#if defined(CONFIG_PCMCIA) && defined(CONFIG_M32R_CFC) +#include <linux/types.h> + +#define M32R_PCC_IOMAP_SIZE 0x1000 + +#define M32R_PCC_IOSTART0 0x1000 +#define M32R_PCC_IOEND0 (M32R_PCC_IOSTART0 + M32R_PCC_IOMAP_SIZE - 1) + +extern void pcc_ioread_byte(int, unsigned long, void *, size_t, size_t, int); +extern void pcc_ioread_word(int, unsigned long, void *, size_t, size_t, int); +extern void pcc_iowrite_byte(int, unsigned long, void *, size_t, size_t, int); +extern void pcc_iowrite_word(int, unsigned long, void *, size_t, size_t, int); +#endif /* CONFIG_PCMCIA && CONFIG_M32R_CFC */ + +#define PORT2ADDR(port) _port2addr(port) + +static inline void *_port2addr(unsigned long port) +{ + return (void *)(port | NONCACHE_OFFSET); +} + +#if defined(CONFIG_IDE) && !defined(CONFIG_M32R_CFC) +static inline void *__port2addr_ata(unsigned long port) +{ + static int dummy_reg; + + switch (port) { + case 0x1f0: return (void *)(0x0c002000 | NONCACHE_OFFSET); + case 0x1f1: return (void *)(0x0c012800 | NONCACHE_OFFSET); + case 0x1f2: return (void *)(0x0c012002 | NONCACHE_OFFSET); + case 0x1f3: return (void *)(0x0c012802 | NONCACHE_OFFSET); + case 0x1f4: return (void *)(0x0c012004 | NONCACHE_OFFSET); + case 0x1f5: return (void *)(0x0c012804 | NONCACHE_OFFSET); + case 0x1f6: return (void *)(0x0c012006 | NONCACHE_OFFSET); + case 0x1f7: return (void *)(0x0c012806 | NONCACHE_OFFSET); + case 0x3f6: return (void *)(0x0c01200e | NONCACHE_OFFSET); + default: return (void *)&dummy_reg; + } +} +#endif + +/* + * M32104T-LAN is located in the extended bus space + * from 0x01000000 to 0x01ffffff on physical address. + * The base address of LAN controller(LAN91C111) is 0x300. + */ +#define LAN_IOSTART (0x300 | NONCACHE_OFFSET) +#define LAN_IOEND (0x320 | NONCACHE_OFFSET) +static inline void *_port2addr_ne(unsigned long port) +{ + return (void *)(port + NONCACHE_OFFSET + 0x01000000); +} + +static inline void delay(void) +{ + __asm__ __volatile__ ("push r0; \n\t pop r0;" : : :"memory"); +} + +/* + * NIC I/O function + */ + +#define PORT2ADDR_NE(port) _port2addr_ne(port) + +static inline unsigned char _ne_inb(void *portp) +{ + return *(volatile unsigned char *)portp; +} + +static inline unsigned short _ne_inw(void *portp) +{ + return (unsigned short)le16_to_cpu(*(volatile unsigned short *)portp); +} + +static inline void _ne_insb(void *portp, void *addr, unsigned long count) +{ + unsigned char *buf = (unsigned char *)addr; + + while (count--) + *buf++ = _ne_inb(portp); +} + +static inline void _ne_outb(unsigned char b, void *portp) +{ + *(volatile unsigned char *)portp = b; +} + +static inline void _ne_outw(unsigned short w, void *portp) +{ + *(volatile unsigned short *)portp = cpu_to_le16(w); +} + +unsigned char _inb(unsigned long port) +{ + if (port >= LAN_IOSTART && port < LAN_IOEND) + return _ne_inb(PORT2ADDR_NE(port)); + + return *(volatile unsigned char *)PORT2ADDR(port); +} + +unsigned short _inw(unsigned long port) +{ + if (port >= LAN_IOSTART && port < LAN_IOEND) + return _ne_inw(PORT2ADDR_NE(port)); + + return *(volatile unsigned short *)PORT2ADDR(port); +} + +unsigned long _inl(unsigned long port) +{ + return *(volatile unsigned long *)PORT2ADDR(port); +} + +unsigned char _inb_p(unsigned long port) +{ + unsigned char v = _inb(port); + delay(); + return (v); +} + +unsigned short _inw_p(unsigned long port) +{ + unsigned short v = _inw(port); + delay(); + return (v); +} + +unsigned long _inl_p(unsigned long port) +{ + unsigned long v = _inl(port); + delay(); + return (v); +} + +void _outb(unsigned char b, unsigned long port) +{ + if (port >= LAN_IOSTART && port < LAN_IOEND) + _ne_outb(b, PORT2ADDR_NE(port)); + else + *(volatile unsigned char *)PORT2ADDR(port) = b; +} + +void _outw(unsigned short w, unsigned long port) +{ + if (port >= LAN_IOSTART && port < LAN_IOEND) + _ne_outw(w, PORT2ADDR_NE(port)); + else + *(volatile unsigned short *)PORT2ADDR(port) = w; +} + +void _outl(unsigned long l, unsigned long port) +{ + *(volatile unsigned long *)PORT2ADDR(port) = l; +} + +void _outb_p(unsigned char b, unsigned long port) +{ + _outb(b, port); + delay(); +} + +void _outw_p(unsigned short w, unsigned long port) +{ + _outw(w, port); + delay(); +} + +void _outl_p(unsigned long l, unsigned long port) +{ + _outl(l, port); + delay(); +} + +void _insb(unsigned int port, void *addr, unsigned long count) +{ + if (port >= LAN_IOSTART && port < LAN_IOEND) + _ne_insb(PORT2ADDR_NE(port), addr, count); + else { + unsigned char *buf = addr; + unsigned char *portp = PORT2ADDR(port); + while (count--) + *buf++ = *(volatile unsigned char *)portp; + } +} + +void _insw(unsigned int port, void *addr, unsigned long count) +{ + unsigned short *buf = addr; + unsigned short *portp; + + if (port >= LAN_IOSTART && port < LAN_IOEND) { + /* + * This portion is only used by smc91111.c to read data + * from the DATA_REG. Do not swap the data. + */ + portp = PORT2ADDR_NE(port); + while (count--) + *buf++ = *(volatile unsigned short *)portp; +#if defined(CONFIG_PCMCIA) && defined(CONFIG_M32R_CFC) + } else if (port >= M32R_PCC_IOSTART0 && port <= M32R_PCC_IOEND0) { + pcc_ioread_word(9, port, (void *)addr, sizeof(unsigned short), + count, 1); +#endif +#if defined(CONFIG_IDE) && !defined(CONFIG_M32R_CFC) + } else if ((port >= 0x1f0 && port <=0x1f7) || port == 0x3f6) { + portp = __port2addr_ata(port); + while (count--) + *buf++ = *(volatile unsigned short *)portp; +#endif + } else { + portp = PORT2ADDR(port); + while (count--) + *buf++ = *(volatile unsigned short *)portp; + } +} + +void _insl(unsigned int port, void *addr, unsigned long count) +{ + unsigned long *buf = addr; + unsigned long *portp; + + portp = PORT2ADDR(port); + while (count--) + *buf++ = *(volatile unsigned long *)portp; +} + +void _outsb(unsigned int port, const void *addr, unsigned long count) +{ + const unsigned char *buf = addr; + unsigned char *portp; + + if (port >= LAN_IOSTART && port < LAN_IOEND) { + portp = PORT2ADDR_NE(port); + while (count--) + _ne_outb(*buf++, portp); + } else { + portp = PORT2ADDR(port); + while (count--) + *(volatile unsigned char *)portp = *buf++; + } +} + +void _outsw(unsigned int port, const void *addr, unsigned long count) +{ + const unsigned short *buf = addr; + unsigned short *portp; + + if (port >= LAN_IOSTART && port < LAN_IOEND) { + /* + * This portion is only used by smc91111.c to write data + * into the DATA_REG. Do not swap the data. + */ + portp = PORT2ADDR_NE(port); + while (count--) + *(volatile unsigned short *)portp = *buf++; +#if defined(CONFIG_IDE) && !defined(CONFIG_M32R_CFC) + } else if ((port >= 0x1f0 && port <=0x1f7) || port == 0x3f6) { + portp = __port2addr_ata(port); + while (count--) + *(volatile unsigned short *)portp = *buf++; +#endif +#if defined(CONFIG_PCMCIA) && defined(CONFIG_M32R_CFC) + } else if (port >= M32R_PCC_IOSTART0 && port <= M32R_PCC_IOEND0) { + pcc_iowrite_word(9, port, (void *)addr, sizeof(unsigned short), + count, 1); +#endif + } else { + portp = PORT2ADDR(port); + while (count--) + *(volatile unsigned short *)portp = *buf++; + } +} + +void _outsl(unsigned int port, const void *addr, unsigned long count) +{ + const unsigned long *buf = addr; + unsigned char *portp; + + portp = PORT2ADDR(port); + while (count--) + *(volatile unsigned long *)portp = *buf++; +} diff --git a/arch/m32r/platforms/m32104ut/setup.c b/arch/m32r/platforms/m32104ut/setup.c new file mode 100644 index 000000000..e2dd778ae --- /dev/null +++ b/arch/m32r/platforms/m32104ut/setup.c @@ -0,0 +1,138 @@ +/* + * linux/arch/m32r/platforms/m32104ut/setup.c + * + * Setup routines for M32104UT Board + * + * Copyright (c) 2002-2005 Hiroyuki Kondo, Hirokazu Takata, + * Hitoshi Yamamoto, Mamoru Sakugawa, + * Naoto Sugai, Hayato Fujiwara + */ + +#include <linux/irq.h> +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/device.h> + +#include <asm/m32r.h> +#include <asm/io.h> + +#define irq2port(x) (M32R_ICU_CR1_PORTL + ((x - 1) * sizeof(unsigned long))) + +icu_data_t icu_data[NR_IRQS]; + +static void disable_m32104ut_irq(unsigned int irq) +{ + unsigned long port, data; + + port = irq2port(irq); + data = icu_data[irq].icucr|M32R_ICUCR_ILEVEL7; + outl(data, port); +} + +static void enable_m32104ut_irq(unsigned int irq) +{ + unsigned long port, data; + + port = irq2port(irq); + data = icu_data[irq].icucr|M32R_ICUCR_IEN|M32R_ICUCR_ILEVEL6; + outl(data, port); +} + +static void mask_m32104ut_irq(struct irq_data *data) +{ + disable_m32104ut_irq(data->irq); +} + +static void unmask_m32104ut_irq(struct irq_data *data) +{ + enable_m32104ut_irq(data->irq); +} + +static void shutdown_m32104ut_irq(struct irq_data *data) +{ + unsigned int irq = data->irq; + unsigned long port = irq2port(irq); + + outl(M32R_ICUCR_ILEVEL7, port); +} + +static struct irq_chip m32104ut_irq_type = +{ + .name = "M32104UT-IRQ", + .irq_shutdown = shutdown_m32104ut_irq, + .irq_unmask = unmask_m32104ut_irq, + .irq_mask = mask_m32104ut_irq, +}; + +void __init init_IRQ(void) +{ + static int once = 0; + + if (once) + return; + else + once++; + +#if defined(CONFIG_SMC91X) + /* INT#0: LAN controller on M32104UT-LAN (SMC91C111)*/ + irq_set_chip_and_handler(M32R_IRQ_INT0, &m32104ut_irq_type, + handle_level_irq); + /* "H" level sense */ + cu_data[M32R_IRQ_INT0].icucr = M32R_ICUCR_IEN | M32R_ICUCR_ISMOD11; + disable_m32104ut_irq(M32R_IRQ_INT0); +#endif /* CONFIG_SMC91X */ + + /* MFT2 : system timer */ + irq_set_chip_and_handler(M32R_IRQ_MFT2, &m32104ut_irq_type, + handle_level_irq); + icu_data[M32R_IRQ_MFT2].icucr = M32R_ICUCR_IEN; + disable_m32104ut_irq(M32R_IRQ_MFT2); + +#ifdef CONFIG_SERIAL_M32R_SIO + /* SIO0_R : uart receive data */ + irq_set_chip_and_handler(M32R_IRQ_SIO0_R, &m32104ut_irq_type, + handle_level_irq); + icu_data[M32R_IRQ_SIO0_R].icucr = M32R_ICUCR_IEN; + disable_m32104ut_irq(M32R_IRQ_SIO0_R); + + /* SIO0_S : uart send data */ + irq_set_chip_and_handler(M32R_IRQ_SIO0_S, &m32104ut_irq_type, + handle_level_irq); + icu_data[M32R_IRQ_SIO0_S].icucr = M32R_ICUCR_IEN; + disable_m32104ut_irq(M32R_IRQ_SIO0_S); +#endif /* CONFIG_SERIAL_M32R_SIO */ +} + +#if defined(CONFIG_SMC91X) + +#define LAN_IOSTART 0x300 +#define LAN_IOEND 0x320 +static struct resource smc91x_resources[] = { + [0] = { + .start = (LAN_IOSTART), + .end = (LAN_IOEND), + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = M32R_IRQ_INT0, + .end = M32R_IRQ_INT0, + .flags = IORESOURCE_IRQ, + } +}; + +static struct platform_device smc91x_device = { + .name = "smc91x", + .id = 0, + .num_resources = ARRAY_SIZE(smc91x_resources), + .resource = smc91x_resources, +}; +#endif + +static int __init platform_init(void) +{ +#if defined(CONFIG_SMC91X) + platform_device_register(&smc91x_device); +#endif + return 0; +} +arch_initcall(platform_init); diff --git a/arch/m32r/platforms/m32700ut/Makefile b/arch/m32r/platforms/m32700ut/Makefile new file mode 100644 index 000000000..0de59084f --- /dev/null +++ b/arch/m32r/platforms/m32700ut/Makefile @@ -0,0 +1 @@ +obj-y := setup.o io.o diff --git a/arch/m32r/platforms/m32700ut/dot.gdbinit_200MHz_16MB b/arch/m32r/platforms/m32700ut/dot.gdbinit_200MHz_16MB new file mode 100644 index 000000000..525dab469 --- /dev/null +++ b/arch/m32r/platforms/m32700ut/dot.gdbinit_200MHz_16MB @@ -0,0 +1,249 @@ +# .gdbinit file +# $Id: dot.gdbinit_200MHz_16MB,v 1.2 2004/10/20 03:02:27 fujiwara Exp $ +#----- +# NOTE: this file is generated by a script, "gen_gdbinit.pl". +# (Please type "gen_gdbinit.pl --help" and check the help message). +# $ Id: gen_gdbinit.pl,v 1.12 2004/07/26 09:56:10 takata Exp $ +#----- +# target platform: m32700ut + +# setting +set width 0d70 +set radix 0d16 + +debug_chaos + +# clk xin:cpu:bif:bus=25:200:50:50 +define clock_init + set *(unsigned long *)0x00ef4008 = 0x00000000 + set *(unsigned long *)0x00ef4004 = 0 + shell sleep 0.1 + # NOTE: Please change the master clock source from PLL-clock to Xin-clock + # and switch off PLL, before resetting the clock gear ratio. + + set *(unsigned long *)0x00ef4024 = 2 + set *(unsigned long *)0x00ef4020 = 2 + set *(unsigned long *)0x00ef4010 = 0 + set *(unsigned long *)0x00ef4014 = 0 + set *(unsigned long *)0x00ef4004 = 3 + shell sleep 0.1 + set *(unsigned long *)0x00ef4008 = 0x00000200 +end + +# Initialize SDRAM controller +define sdram_init + # SDIR0 + set *(unsigned long *)0x00ef6008 = 0x00000182 + # SDIR1 + set *(unsigned long *)0x00ef600c = 0x00000001 + # Initialize wait + shell sleep 0.1 + # Ch0-MOD + set *(unsigned long *)0x00ef602c = 0x00000020 + # Ch0-TR + set *(unsigned long *)0x00ef6028 = 0x00041302 + # Ch0-ADR (size:16MB) + set *(unsigned long *)0x00ef6020 = 0x08000002 + # AutoRef On + set *(unsigned long *)0x00ef6004 = 0x00010517 + # Access enable + set *(unsigned long *)0x00ef6024 = 0x00000001 +end +document sdram_init + SDRAM controller initialization + 0x08000000 - 0x08ffffff (16MB) +end + +# Initialize BSEL3 for UT-CFC +define cfc_init + set $sfrbase = 0xa0ef0000 +# too fast +# set *(unsigned long *)($sfrbase + 0x5300) = 0x0b0b8000 +# set *(unsigned long *)($sfrbase + 0x5304) = 0x00102204 +# set *(unsigned long *)($sfrbase + 0x5300) = 0x1f1f8000 +# set *(unsigned long *)($sfrbase + 0x5300) = 0x1f1f1fdf +# set *(unsigned long *)($sfrbase + 0x5304) = 0x0013220f +# set *(unsigned long *)($sfrbase + 0x5304) = 0x0013330f +end +document cfc_init + CF controller initialization +end + +# MMU enable +define mmu_enable + set $evb=0x88000000 + set *(unsigned long *)0xffff0024=1 +end + +# MMU disable +define mmu_disable + set $evb=0 + set *(unsigned long *)0xffff0024=0 +end + +# Show TLB entries +define show_tlb_entries + set $i = 0 + set $addr = $arg0 + set $nr_entries = $arg1 + use_mon_code + while ($i < $nr_entries) + set $tlb_tag = *(unsigned long*)$addr + set $tlb_data = *(unsigned long*)($addr + 4) + printf " [%2d] 0x%08lx : 0x%08lx - 0x%08lx\n", $i, $addr, $tlb_tag, $tlb_data + set $i = $i + 1 + set $addr = $addr + 8 + end + use_debug_dma +end +define itlb + set $itlb=0xfe000000 + show_tlb_entries $itlb 0d32 +end +define dtlb + set $dtlb=0xfe000800 + show_tlb_entries $dtlb 0d32 +end + +# Initialize TLB entries +define init_tlb_entries + set $i = 0 + set $addr = $arg0 + set $nr_entries = $arg1 + use_mon_code + while ($i < $nr_entries) + set *(unsigned long *)($addr + 0x4) = 0 + set $i = $i + 1 + set $addr = $addr + 8 + end + use_debug_dma +end +define tlb_init + set $itlb=0xfe000000 + init_tlb_entries $itlb 0d32 + set $dtlb=0xfe000800 + init_tlb_entries $dtlb 0d32 +end + +# Show current task structure +define show_current + set $current = $spi & 0xffffe000 + printf "$current=0x%08lX\n",$current + print *(struct task_struct *)$current +end + +# Show user assigned task structure +define show_task + set = $arg0 & 0xffffe000 + printf "$task=0x%08lX\n",$task + print *(struct task_struct *)$task +end +document show_task + Show user assigned task structure + arg0 : task structure address +end + +# Show M32R registers +define show_regs + printf " R0[0x%08lX] R1[0x%08lX] R2[0x%08lX] R3[0x%08lX]\n",$r0,$r1,$r2,$r3 + printf " R4[0x%08lX] R5[0x%08lX] R6[0x%08lX] R7[0x%08lX]\n",$r4,$r5,$r6,$r7 + printf " R8[0x%08lX] R9[0x%08lX] R10[0x%08lX] R11[0x%08lX]\n",$r8,$r9,$r10,$r11 + printf "R12[0x%08lX] FP[0x%08lX] LR[0x%08lX] SP[0x%08lX]\n",$r12,$fp,$lr,$sp + printf "PSW[0x%08lX] CBR[0x%08lX] SPI[0x%08lX] SPU[0x%08lX]\n",$psw,$cbr,$spi,$spu + printf "BPC[0x%08lX] PC[0x%08lX] ACCL[0x%08lX] ACCH[0x%08lX]\n",$bpc,$pc,$accl,$acch + printf "EVB[0x%08lX]\n",$evb +end + +# Setup all +define setup + use_mon_code + set *(unsigned int)0xfffffffc=0x60 + shell sleep 0.1 + clock_init + shell sleep 0.1 + # SDRAM: 16MB + set *(unsigned long *)0x00ef6020 = 0x08000002 + cfc_init + # USB + set *(unsigned short *)0xb0301000 = 0x100 + + set $evb=0x08000000 +end + +# Load modules +define load_modules + use_debug_dma + load +end + +# Set kernel parameters +define set_kernel_parameters + set $param = (void*)0x08001000 + # INITRD_START +# set *(unsigned long *)($param + 0x0010) = 0x08300000 + # INITRD_SIZE +# set *(unsigned long *)($param + 0x0014) = 0x00000000 + # M32R_CPUCLK + set *(unsigned long *)($param + 0x0018) = 0d200000000 + # M32R_BUSCLK + set *(unsigned long *)($param + 0x001c) = 0d50000000 + + # M32R_TIMER_DIVIDE + set *(unsigned long *)($param + 0x0020) = 0d128 + + set {char[0x200]}($param + 0x100) = "console=ttyS0,115200n8x console=tty1 root=/dev/nfsroot nfsroot=192.168.0.1:/project/m32r-linux/export/rootfs,rsize=1024,wsize=1024 nfsaddrs=192.168.0.101:192.168.0.1:192.168.0.1:255.255.255.0:mappi001 mem=16M \0" +end + +# Boot +define boot + set_kernel_parameters + set $fp = 0 + set $pc = 0x08002000 +# set *(unsigned char *)0xffffffff = 0x03 + si + c +end + +# Set breakpoints +define set_breakpoints + b *0x08000030 +end + +# Restart +define restart + sdireset + sdireset + set $pc = 0 + b *0x04001000 + b *0x08001000 + b *0x08002000 + si + c + tlb_init + del + setup + load_modules + boot +end + +define si + stepi + x/i $pc + show_reg +end + +sdireset +sdireset +file vmlinux +target m32rsdi +set $pc = 0 +b *0x04001000 +b *0x08001000 +b *0x08002000 +c +tlb_init +del +setup +load_modules +boot + diff --git a/arch/m32r/platforms/m32700ut/dot.gdbinit_300MHz_32MB b/arch/m32r/platforms/m32700ut/dot.gdbinit_300MHz_32MB new file mode 100644 index 000000000..aa503657a --- /dev/null +++ b/arch/m32r/platforms/m32700ut/dot.gdbinit_300MHz_32MB @@ -0,0 +1,249 @@ +# .gdbinit file +# $Id: dot.gdbinit_300MHz_32MB,v 1.2 2004/10/20 03:02:27 fujiwara Exp $ +#----- +# NOTE: this file is generated by a script, "gen_gdbinit.pl". +# (Please type "gen_gdbinit.pl --help" and check the help message). +# $ Id: gen_gdbinit.pl,v 1.12 2004/07/26 09:56:10 takata Exp $ +#----- +# target platform: m32700ut + +# setting +set width 0d70 +set radix 0d16 + +debug_chaos + +# clk xin:cpu:bif:bus=25:300:75:75 +define clock_init + set *(unsigned long *)0x00ef4008 = 0x00000000 + set *(unsigned long *)0x00ef4004 = 0 + shell sleep 0.1 + # NOTE: Please change the master clock source from PLL-clock to Xin-clock + # and switch off PLL, before resetting the clock gear ratio. + + set *(unsigned long *)0x00ef4024 = 2 + set *(unsigned long *)0x00ef4020 = 2 + set *(unsigned long *)0x00ef4010 = 0 + set *(unsigned long *)0x00ef4014 = 0 + set *(unsigned long *)0x00ef4004 = 5 + shell sleep 0.1 + set *(unsigned long *)0x00ef4008 = 0x00000200 +end + +# Initialize SDRAM controller +define sdram_init + # SDIR0 + set *(unsigned long *)0x00ef6008 = 0x00000182 + # SDIR1 + set *(unsigned long *)0x00ef600c = 0x00000001 + # Initialize wait + shell sleep 0.1 + # Ch0-MOD + set *(unsigned long *)0x00ef602c = 0x00000020 + # Ch0-TR + set *(unsigned long *)0x00ef6028 = 0x00051502 + # Ch0-ADR (size:32MB) + set *(unsigned long *)0x00ef6020 = 0x08000003 + # AutoRef On + set *(unsigned long *)0x00ef6004 = 0x00010e24 + # Access enable + set *(unsigned long *)0x00ef6024 = 0x00000001 +end +document sdram_init + SDRAM controller initialization + 0x08000000 - 0x09ffffff (32MB) +end + +# Initialize BSEL3 for UT-CFC +define cfc_init + set $sfrbase = 0xa0ef0000 +# too fast +# set *(unsigned long *)($sfrbase + 0x5300) = 0x0b0b8000 +# set *(unsigned long *)($sfrbase + 0x5304) = 0x00102204 +# set *(unsigned long *)($sfrbase + 0x5300) = 0x1f1f8000 +# set *(unsigned long *)($sfrbase + 0x5300) = 0x1f1f1fdf +# set *(unsigned long *)($sfrbase + 0x5304) = 0x0013220f +# set *(unsigned long *)($sfrbase + 0x5304) = 0x0013330f +end +document cfc_init + CF controller initialization +end + +# MMU enable +define mmu_enable + set $evb=0x88000000 + set *(unsigned long *)0xffff0024=1 +end + +# MMU disable +define mmu_disable + set $evb=0 + set *(unsigned long *)0xffff0024=0 +end + +# Show TLB entries +define show_tlb_entries + set $i = 0 + set $addr = $arg0 + set $nr_entries = $arg1 + use_mon_code + while ($i < $nr_entries) + set $tlb_tag = *(unsigned long*)$addr + set $tlb_data = *(unsigned long*)($addr + 4) + printf " [%2d] 0x%08lx : 0x%08lx - 0x%08lx\n", $i, $addr, $tlb_tag, $tlb_data + set $i = $i + 1 + set $addr = $addr + 8 + end + use_debug_dma +end +define itlb + set $itlb=0xfe000000 + show_tlb_entries $itlb 0d32 +end +define dtlb + set $dtlb=0xfe000800 + show_tlb_entries $dtlb 0d32 +end + +# Initialize TLB entries +define init_tlb_entries + set $i = 0 + set $addr = $arg0 + set $nr_entries = $arg1 + use_mon_code + while ($i < $nr_entries) + set *(unsigned long *)($addr + 0x4) = 0 + set $i = $i + 1 + set $addr = $addr + 8 + end + use_debug_dma +end +define tlb_init + set $itlb=0xfe000000 + init_tlb_entries $itlb 0d32 + set $dtlb=0xfe000800 + init_tlb_entries $dtlb 0d32 +end + +# Show current task structure +define show_current + set $current = $spi & 0xffffe000 + printf "$current=0x%08lX\n",$current + print *(struct task_struct *)$current +end + +# Show user assigned task structure +define show_task + set = $arg0 & 0xffffe000 + printf "$task=0x%08lX\n",$task + print *(struct task_struct *)$task +end +document show_task + Show user assigned task structure + arg0 : task structure address +end + +# Show M32R registers +define show_regs + printf " R0[0x%08lX] R1[0x%08lX] R2[0x%08lX] R3[0x%08lX]\n",$r0,$r1,$r2,$r3 + printf " R4[0x%08lX] R5[0x%08lX] R6[0x%08lX] R7[0x%08lX]\n",$r4,$r5,$r6,$r7 + printf " R8[0x%08lX] R9[0x%08lX] R10[0x%08lX] R11[0x%08lX]\n",$r8,$r9,$r10,$r11 + printf "R12[0x%08lX] FP[0x%08lX] LR[0x%08lX] SP[0x%08lX]\n",$r12,$fp,$lr,$sp + printf "PSW[0x%08lX] CBR[0x%08lX] SPI[0x%08lX] SPU[0x%08lX]\n",$psw,$cbr,$spi,$spu + printf "BPC[0x%08lX] PC[0x%08lX] ACCL[0x%08lX] ACCH[0x%08lX]\n",$bpc,$pc,$accl,$acch + printf "EVB[0x%08lX]\n",$evb +end + +# Setup all +define setup + use_mon_code + set *(unsigned int)0xfffffffc=0x60 + shell sleep 0.1 + clock_init + shell sleep 0.1 + # SDRAM: 32MB + set *(unsigned long *)0x00ef6020 = 0x08000003 + cfc_init + # USB + set *(unsigned short *)0xb0301000 = 0x100 + + set $evb=0x08000000 +end + +# Load modules +define load_modules + use_debug_dma + load +end + +# Set kernel parameters +define set_kernel_parameters + set $param = (void*)0x08001000 + # INITRD_START +# set *(unsigned long *)($param + 0x0010) = 0x08300000 + # INITRD_SIZE +# set *(unsigned long *)($param + 0x0014) = 0x00000000 + # M32R_CPUCLK + set *(unsigned long *)($param + 0x0018) = 0d300000000 + # M32R_BUSCLK + set *(unsigned long *)($param + 0x001c) = 0d75000000 + + # M32R_TIMER_DIVIDE + set *(unsigned long *)($param + 0x0020) = 0d128 + + set {char[0x200]}($param + 0x100) = "console=ttyS0,115200n8x console=tty1 root=/dev/nfsroot nfsroot=192.168.0.1:/project/m32r-linux/export/rootfs,rsize=1024,wsize=1024 nfsaddrs=192.168.0.101:192.168.0.1:192.168.0.1:255.255.255.0:mappi001 mem=32M \0" +end + +# Boot +define boot + set_kernel_parameters + set $fp = 0 + set $pc = 0x08002000 +# set *(unsigned char *)0xffffffff = 0x03 + si + c +end + +# Set breakpoints +define set_breakpoints + b *0x08000030 +end + +# Restart +define restart + sdireset + sdireset + set $pc = 0 + b *0x04001000 + b *0x08001000 + b *0x08002000 + si + c + tlb_init + del + setup + load_modules + boot +end + +define si + stepi + x/i $pc + show_reg +end + +sdireset +sdireset +file vmlinux +target m32rsdi +set $pc = 0 +b *0x04001000 +b *0x08001000 +b *0x08002000 +c +tlb_init +del +setup +load_modules +boot + diff --git a/arch/m32r/platforms/m32700ut/dot.gdbinit_400MHz_32MB b/arch/m32r/platforms/m32700ut/dot.gdbinit_400MHz_32MB new file mode 100644 index 000000000..adc608aab --- /dev/null +++ b/arch/m32r/platforms/m32700ut/dot.gdbinit_400MHz_32MB @@ -0,0 +1,249 @@ +# .gdbinit file +# $Id: dot.gdbinit_400MHz_32MB,v 1.1 2004/10/21 01:41:27 fujiwara Exp $ +#----- +# NOTE: this file is generated by a script, "gen_gdbinit.pl". +# (Please type "gen_gdbinit.pl --help" and check the help message). +# $ Id: gen_gdbinit.pl,v 1.12 2004/07/26 09:56:10 takata Exp $ +#----- +# target platform: m32700ut + +# setting +set width 0d70 +set radix 0d16 + +debug_chaos + +# clk xin:cpu:bif:bus=25:400:100:50 +define clock_init + set *(unsigned long *)0x00ef4008 = 0x00000000 + set *(unsigned long *)0x00ef4004 = 0 + shell sleep 0.1 + # NOTE: Please change the master clock source from PLL-clock to Xin-clock + # and switch off PLL, before resetting the clock gear ratio. + + set *(unsigned long *)0x00ef4024 = 3 + set *(unsigned long *)0x00ef4020 = 2 + set *(unsigned long *)0x00ef4010 = 0 + set *(unsigned long *)0x00ef4014 = 0 + set *(unsigned long *)0x00ef4004 = 7 + shell sleep 0.1 + set *(unsigned long *)0x00ef4008 = 0x00000200 +end + +# Initialize SDRAM controller +define sdram_init + # SDIR0 + set *(unsigned long *)0x00ef6008 = 0x00000182 + # SDIR1 + set *(unsigned long *)0x00ef600c = 0x00000001 + # Initialize wait + shell sleep 0.1 + # Ch0-MOD + set *(unsigned long *)0x00ef602c = 0x00000020 + # Ch0-TR + set *(unsigned long *)0x00ef6028 = 0x00041302 + # Ch0-ADR (size:32MB) + set *(unsigned long *)0x00ef6020 = 0x08000003 + # AutoRef On + set *(unsigned long *)0x00ef6004 = 0x00010517 + # Access enable + set *(unsigned long *)0x00ef6024 = 0x00000001 +end +document sdram_init + SDRAM controller initialization + 0x08000000 - 0x09ffffff (32MB) +end + +# Initialize BSEL3 for UT-CFC +define cfc_init + set $sfrbase = 0xa0ef0000 +# too fast +# set *(unsigned long *)($sfrbase + 0x5300) = 0x0b0b8000 +# set *(unsigned long *)($sfrbase + 0x5304) = 0x00102204 +# set *(unsigned long *)($sfrbase + 0x5300) = 0x1f1f8000 +# set *(unsigned long *)($sfrbase + 0x5300) = 0x1f1f1fdf +# set *(unsigned long *)($sfrbase + 0x5304) = 0x0013220f +# set *(unsigned long *)($sfrbase + 0x5304) = 0x0013330f +end +document cfc_init + CF controller initialization +end + +# MMU enable +define mmu_enable + set $evb=0x88000000 + set *(unsigned long *)0xffff0024=1 +end + +# MMU disable +define mmu_disable + set $evb=0 + set *(unsigned long *)0xffff0024=0 +end + +# Show TLB entries +define show_tlb_entries + set $i = 0 + set $addr = $arg0 + set $nr_entries = $arg1 + use_mon_code + while ($i < $nr_entries) + set $tlb_tag = *(unsigned long*)$addr + set $tlb_data = *(unsigned long*)($addr + 4) + printf " [%2d] 0x%08lx : 0x%08lx - 0x%08lx\n", $i, $addr, $tlb_tag, $tlb_data + set $i = $i + 1 + set $addr = $addr + 8 + end + use_debug_dma +end +define itlb + set $itlb=0xfe000000 + show_tlb_entries $itlb 0d32 +end +define dtlb + set $dtlb=0xfe000800 + show_tlb_entries $dtlb 0d32 +end + +# Initialize TLB entries +define init_tlb_entries + set $i = 0 + set $addr = $arg0 + set $nr_entries = $arg1 + use_mon_code + while ($i < $nr_entries) + set *(unsigned long *)($addr + 0x4) = 0 + set $i = $i + 1 + set $addr = $addr + 8 + end + use_debug_dma +end +define tlb_init + set $itlb=0xfe000000 + init_tlb_entries $itlb 0d32 + set $dtlb=0xfe000800 + init_tlb_entries $dtlb 0d32 +end + +# Show current task structure +define show_current + set $current = $spi & 0xffffe000 + printf "$current=0x%08lX\n",$current + print *(struct task_struct *)$current +end + +# Show user assigned task structure +define show_task + set = $arg0 & 0xffffe000 + printf "$task=0x%08lX\n",$task + print *(struct task_struct *)$task +end +document show_task + Show user assigned task structure + arg0 : task structure address +end + +# Show M32R registers +define show_regs + printf " R0[0x%08lX] R1[0x%08lX] R2[0x%08lX] R3[0x%08lX]\n",$r0,$r1,$r2,$r3 + printf " R4[0x%08lX] R5[0x%08lX] R6[0x%08lX] R7[0x%08lX]\n",$r4,$r5,$r6,$r7 + printf " R8[0x%08lX] R9[0x%08lX] R10[0x%08lX] R11[0x%08lX]\n",$r8,$r9,$r10,$r11 + printf "R12[0x%08lX] FP[0x%08lX] LR[0x%08lX] SP[0x%08lX]\n",$r12,$fp,$lr,$sp + printf "PSW[0x%08lX] CBR[0x%08lX] SPI[0x%08lX] SPU[0x%08lX]\n",$psw,$cbr,$spi,$spu + printf "BPC[0x%08lX] PC[0x%08lX] ACCL[0x%08lX] ACCH[0x%08lX]\n",$bpc,$pc,$accl,$acch + printf "EVB[0x%08lX]\n",$evb +end + +# Setup all +define setup + use_mon_code + set *(unsigned int)0xfffffffc=0x60 + shell sleep 0.1 + clock_init + shell sleep 0.1 + # SDRAM: 32MB + set *(unsigned long *)0x00ef6020 = 0x08000003 + cfc_init + # USB + set *(unsigned short *)0xb0301000 = 0x100 + + set $evb=0x08000000 +end + +# Load modules +define load_modules + use_debug_dma + load +end + +# Set kernel parameters +define set_kernel_parameters + set $param = (void*)0x08001000 + # INITRD_START +# set *(unsigned long *)($param + 0x0010) = 0x08300000 + # INITRD_SIZE +# set *(unsigned long *)($param + 0x0014) = 0x00000000 + # M32R_CPUCLK + set *(unsigned long *)($param + 0x0018) = 0d400000000 + # M32R_BUSCLK + set *(unsigned long *)($param + 0x001c) = 0d50000000 + + # M32R_TIMER_DIVIDE + set *(unsigned long *)($param + 0x0020) = 0d128 + + set {char[0x200]}($param + 0x100) = "console=ttyS0,115200n8x console=tty1 root=/dev/nfsroot nfsroot=192.168.0.1:/project/m32r-linux/export/rootfs,rsize=1024,wsize=1024 nfsaddrs=192.168.0.101:192.168.0.1:192.168.0.1:255.255.255.0:mappi001 mem=32M \0" +end + +# Boot +define boot + set_kernel_parameters + set $fp = 0 + set $pc = 0x08002000 +# set *(unsigned char *)0xffffffff = 0x03 + si + c +end + +# Set breakpoints +define set_breakpoints + b *0x08000030 +end + +# Restart +define restart + sdireset + sdireset + set $pc = 0 + b *0x04001000 + b *0x08001000 + b *0x08002000 + si + c + tlb_init + del + setup + load_modules + boot +end + +define si + stepi + x/i $pc + show_reg +end + +sdireset +sdireset +file vmlinux +target m32rsdi +set $pc = 0 +b *0x04001000 +b *0x08001000 +b *0x08002000 +c +tlb_init +del +setup +load_modules +boot + diff --git a/arch/m32r/platforms/m32700ut/io.c b/arch/m32r/platforms/m32700ut/io.c new file mode 100644 index 000000000..6862586e5 --- /dev/null +++ b/arch/m32r/platforms/m32700ut/io.c @@ -0,0 +1,395 @@ +/* + * linux/arch/m32r/platforms/m32700ut/io.c + * + * Typical I/O routines for M32700UT board. + * + * Copyright (c) 2001-2005 Hiroyuki Kondo, Hirokazu Takata, + * Hitoshi Yamamoto, Takeo Takahashi + * + * This file is subject to the terms and conditions of the GNU General + * Public License. See the file "COPYING" in the main directory of this + * archive for more details. + */ + +#include <asm/m32r.h> +#include <asm/page.h> +#include <asm/io.h> +#include <asm/byteorder.h> + +#if defined(CONFIG_PCMCIA) && defined(CONFIG_M32R_CFC) +#include <linux/types.h> + +#define M32R_PCC_IOMAP_SIZE 0x1000 + +#define M32R_PCC_IOSTART0 0x1000 +#define M32R_PCC_IOEND0 (M32R_PCC_IOSTART0 + M32R_PCC_IOMAP_SIZE - 1) + +extern void pcc_ioread_byte(int, unsigned long, void *, size_t, size_t, int); +extern void pcc_ioread_word(int, unsigned long, void *, size_t, size_t, int); +extern void pcc_iowrite_byte(int, unsigned long, void *, size_t, size_t, int); +extern void pcc_iowrite_word(int, unsigned long, void *, size_t, size_t, int); +#endif /* CONFIG_PCMCIA && CONFIG_M32R_CFC */ + +#define PORT2ADDR(port) _port2addr(port) +#define PORT2ADDR_USB(port) _port2addr_usb(port) + +static inline void *_port2addr(unsigned long port) +{ + return (void *)(port | NONCACHE_OFFSET); +} + +#if defined(CONFIG_IDE) && !defined(CONFIG_M32R_CFC) +static inline void *__port2addr_ata(unsigned long port) +{ + static int dummy_reg; + + switch (port) { + case 0x1f0: return (void *)(0x0c002000 | NONCACHE_OFFSET); + case 0x1f1: return (void *)(0x0c012800 | NONCACHE_OFFSET); + case 0x1f2: return (void *)(0x0c012002 | NONCACHE_OFFSET); + case 0x1f3: return (void *)(0x0c012802 | NONCACHE_OFFSET); + case 0x1f4: return (void *)(0x0c012004 | NONCACHE_OFFSET); + case 0x1f5: return (void *)(0x0c012804 | NONCACHE_OFFSET); + case 0x1f6: return (void *)(0x0c012006 | NONCACHE_OFFSET); + case 0x1f7: return (void *)(0x0c012806 | NONCACHE_OFFSET); + case 0x3f6: return (void *)(0x0c01200e | NONCACHE_OFFSET); + default: return (void *)&dummy_reg; + } +} +#endif + +/* + * M32700UT-LAN is located in the extended bus space + * from 0x10000000 to 0x13ffffff on physical address. + * The base address of LAN controller(LAN91C111) is 0x300. + */ +#define LAN_IOSTART (0x300 | NONCACHE_OFFSET) +#define LAN_IOEND (0x320 | NONCACHE_OFFSET) +static inline void *_port2addr_ne(unsigned long port) +{ + return (void *)(port + 0x10000000); +} +static inline void *_port2addr_usb(unsigned long port) +{ + return (void *)((port & 0x0f) + NONCACHE_OFFSET + 0x10303000); +} + +static inline void delay(void) +{ + __asm__ __volatile__ ("push r0; \n\t pop r0;" : : :"memory"); +} + +/* + * NIC I/O function + */ + +#define PORT2ADDR_NE(port) _port2addr_ne(port) + +static inline unsigned char _ne_inb(void *portp) +{ + return *(volatile unsigned char *)portp; +} + +static inline unsigned short _ne_inw(void *portp) +{ + return (unsigned short)le16_to_cpu(*(volatile unsigned short *)portp); +} + +static inline void _ne_insb(void *portp, void *addr, unsigned long count) +{ + unsigned char *buf = (unsigned char *)addr; + + while (count--) + *buf++ = _ne_inb(portp); +} + +static inline void _ne_outb(unsigned char b, void *portp) +{ + *(volatile unsigned char *)portp = b; +} + +static inline void _ne_outw(unsigned short w, void *portp) +{ + *(volatile unsigned short *)portp = cpu_to_le16(w); +} + +unsigned char _inb(unsigned long port) +{ + if (port >= LAN_IOSTART && port < LAN_IOEND) + return _ne_inb(PORT2ADDR_NE(port)); + +#if defined(CONFIG_IDE) && !defined(CONFIG_M32R_CFC) + else if ((port >= 0x1f0 && port <=0x1f7) || port == 0x3f6) { + return *(volatile unsigned char *)__port2addr_ata(port); + } +#endif +#if defined(CONFIG_PCMCIA) && defined(CONFIG_M32R_CFC) + else if (port >= M32R_PCC_IOSTART0 && port <= M32R_PCC_IOEND0) { + unsigned char b; + pcc_ioread_byte(0, port, &b, sizeof(b), 1, 0); + return b; + } else +#endif + + return *(volatile unsigned char *)PORT2ADDR(port); +} + +unsigned short _inw(unsigned long port) +{ + if (port >= LAN_IOSTART && port < LAN_IOEND) + return _ne_inw(PORT2ADDR_NE(port)); +#if defined(CONFIG_IDE) && !defined(CONFIG_M32R_CFC) + else if ((port >= 0x1f0 && port <=0x1f7) || port == 0x3f6) { + return *(volatile unsigned short *)__port2addr_ata(port); + } +#endif +#if defined(CONFIG_USB) + else if(port >= 0x340 && port < 0x3a0) + return *(volatile unsigned short *)PORT2ADDR_USB(port); +#endif +#if defined(CONFIG_PCMCIA) && defined(CONFIG_M32R_CFC) + else if (port >= M32R_PCC_IOSTART0 && port <= M32R_PCC_IOEND0) { + unsigned short w; + pcc_ioread_word(0, port, &w, sizeof(w), 1, 0); + return w; + } else +#endif + return *(volatile unsigned short *)PORT2ADDR(port); +} + +unsigned long _inl(unsigned long port) +{ +#if defined(CONFIG_PCMCIA) && defined(CONFIG_M32R_CFC) + if (port >= M32R_PCC_IOSTART0 && port <= M32R_PCC_IOEND0) { + unsigned long l; + pcc_ioread_word(0, port, &l, sizeof(l), 1, 0); + return l; + } else +#endif + return *(volatile unsigned long *)PORT2ADDR(port); +} + +unsigned char _inb_p(unsigned long port) +{ + unsigned char v = _inb(port); + delay(); + return (v); +} + +unsigned short _inw_p(unsigned long port) +{ + unsigned short v = _inw(port); + delay(); + return (v); +} + +unsigned long _inl_p(unsigned long port) +{ + unsigned long v = _inl(port); + delay(); + return (v); +} + +void _outb(unsigned char b, unsigned long port) +{ + if (port >= LAN_IOSTART && port < LAN_IOEND) + _ne_outb(b, PORT2ADDR_NE(port)); + else +#if defined(CONFIG_IDE) && !defined(CONFIG_M32R_CFC) + if ((port >= 0x1f0 && port <=0x1f7) || port == 0x3f6) { + *(volatile unsigned char *)__port2addr_ata(port) = b; + } else +#endif +#if defined(CONFIG_PCMCIA) && defined(CONFIG_M32R_CFC) + if (port >= M32R_PCC_IOSTART0 && port <= M32R_PCC_IOEND0) { + pcc_iowrite_byte(0, port, &b, sizeof(b), 1, 0); + } else +#endif + *(volatile unsigned char *)PORT2ADDR(port) = b; +} + +void _outw(unsigned short w, unsigned long port) +{ + if (port >= LAN_IOSTART && port < LAN_IOEND) + _ne_outw(w, PORT2ADDR_NE(port)); + else +#if defined(CONFIG_IDE) && !defined(CONFIG_M32R_CFC) + if ((port >= 0x1f0 && port <=0x1f7) || port == 0x3f6) { + *(volatile unsigned short *)__port2addr_ata(port) = w; + } else +#endif +#if defined(CONFIG_USB) + if(port >= 0x340 && port < 0x3a0) + *(volatile unsigned short *)PORT2ADDR_USB(port) = w; + else +#endif +#if defined(CONFIG_PCMCIA) && defined(CONFIG_M32R_CFC) + if (port >= M32R_PCC_IOSTART0 && port <= M32R_PCC_IOEND0) { + pcc_iowrite_word(0, port, &w, sizeof(w), 1, 0); + } else +#endif + *(volatile unsigned short *)PORT2ADDR(port) = w; +} + +void _outl(unsigned long l, unsigned long port) +{ +#if defined(CONFIG_PCMCIA) && defined(CONFIG_M32R_CFC) + if (port >= M32R_PCC_IOSTART0 && port <= M32R_PCC_IOEND0) { + pcc_iowrite_word(0, port, &l, sizeof(l), 1, 0); + } else +#endif + *(volatile unsigned long *)PORT2ADDR(port) = l; +} + +void _outb_p(unsigned char b, unsigned long port) +{ + _outb(b, port); + delay(); +} + +void _outw_p(unsigned short w, unsigned long port) +{ + _outw(w, port); + delay(); +} + +void _outl_p(unsigned long l, unsigned long port) +{ + _outl(l, port); + delay(); +} + +void _insb(unsigned int port, void *addr, unsigned long count) +{ + if (port >= LAN_IOSTART && port < LAN_IOEND) + _ne_insb(PORT2ADDR_NE(port), addr, count); +#if defined(CONFIG_IDE) && !defined(CONFIG_M32R_CFC) + else if ((port >= 0x1f0 && port <=0x1f7) || port == 0x3f6) { + unsigned char *buf = addr; + unsigned char *portp = __port2addr_ata(port); + while (count--) + *buf++ = *(volatile unsigned char *)portp; + } +#endif +#if defined(CONFIG_PCMCIA) && defined(CONFIG_M32R_CFC) + else if (port >= M32R_PCC_IOSTART0 && port <= M32R_PCC_IOEND0) { + pcc_ioread_byte(0, port, (void *)addr, sizeof(unsigned char), + count, 1); + } +#endif + else { + unsigned char *buf = addr; + unsigned char *portp = PORT2ADDR(port); + while (count--) + *buf++ = *(volatile unsigned char *)portp; + } +} + +void _insw(unsigned int port, void *addr, unsigned long count) +{ + unsigned short *buf = addr; + unsigned short *portp; + + if (port >= LAN_IOSTART && port < LAN_IOEND) { + /* + * This portion is only used by smc91111.c to read data + * from the DATA_REG. Do not swap the data. + */ + portp = PORT2ADDR_NE(port); + while (count--) + *buf++ = *(volatile unsigned short *)portp; +#if defined(CONFIG_PCMCIA) && defined(CONFIG_M32R_CFC) + } else if (port >= M32R_PCC_IOSTART0 && port <= M32R_PCC_IOEND0) { + pcc_ioread_word(9, port, (void *)addr, sizeof(unsigned short), + count, 1); +#endif +#if defined(CONFIG_IDE) && !defined(CONFIG_M32R_CFC) + } else if ((port >= 0x1f0 && port <=0x1f7) || port == 0x3f6) { + portp = __port2addr_ata(port); + while (count--) + *buf++ = *(volatile unsigned short *)portp; +#endif + } else { + portp = PORT2ADDR(port); + while (count--) + *buf++ = *(volatile unsigned short *)portp; + } +} + +void _insl(unsigned int port, void *addr, unsigned long count) +{ + unsigned long *buf = addr; + unsigned long *portp; + + portp = PORT2ADDR(port); + while (count--) + *buf++ = *(volatile unsigned long *)portp; +} + +void _outsb(unsigned int port, const void *addr, unsigned long count) +{ + const unsigned char *buf = addr; + unsigned char *portp; + + if (port >= LAN_IOSTART && port < LAN_IOEND) { + portp = PORT2ADDR_NE(port); + while (count--) + _ne_outb(*buf++, portp); +#if defined(CONFIG_IDE) && !defined(CONFIG_M32R_CFC) + } else if ((port >= 0x1f0 && port <=0x1f7) || port == 0x3f6) { + portp = __port2addr_ata(port); + while (count--) + *(volatile unsigned char *)portp = *buf++; +#endif +#if defined(CONFIG_PCMCIA) && defined(CONFIG_M32R_CFC) + } else if (port >= M32R_PCC_IOSTART0 && port <= M32R_PCC_IOEND0) { + pcc_iowrite_byte(0, port, (void *)addr, sizeof(unsigned char), + count, 1); +#endif + } else { + portp = PORT2ADDR(port); + while (count--) + *(volatile unsigned char *)portp = *buf++; + } +} + +void _outsw(unsigned int port, const void *addr, unsigned long count) +{ + const unsigned short *buf = addr; + unsigned short *portp; + + if (port >= LAN_IOSTART && port < LAN_IOEND) { + /* + * This portion is only used by smc91111.c to write data + * into the DATA_REG. Do not swap the data. + */ + portp = PORT2ADDR_NE(port); + while (count--) + *(volatile unsigned short *)portp = *buf++; +#if defined(CONFIG_IDE) && !defined(CONFIG_M32R_CFC) + } else if ((port >= 0x1f0 && port <=0x1f7) || port == 0x3f6) { + portp = __port2addr_ata(port); + while (count--) + *(volatile unsigned short *)portp = *buf++; +#endif +#if defined(CONFIG_PCMCIA) && defined(CONFIG_M32R_CFC) + } else if (port >= M32R_PCC_IOSTART0 && port <= M32R_PCC_IOEND0) { + pcc_iowrite_word(9, port, (void *)addr, sizeof(unsigned short), + count, 1); +#endif + } else { + portp = PORT2ADDR(port); + while (count--) + *(volatile unsigned short *)portp = *buf++; + } +} + +void _outsl(unsigned int port, const void *addr, unsigned long count) +{ + const unsigned long *buf = addr; + unsigned char *portp; + + portp = PORT2ADDR(port); + while (count--) + *(volatile unsigned long *)portp = *buf++; +} diff --git a/arch/m32r/platforms/m32700ut/setup.c b/arch/m32r/platforms/m32700ut/setup.c new file mode 100644 index 000000000..9a4ba8a85 --- /dev/null +++ b/arch/m32r/platforms/m32700ut/setup.c @@ -0,0 +1,449 @@ +/* + * linux/arch/m32r/platforms/m32700ut/setup.c + * + * Setup routines for Renesas M32700UT Board + * + * Copyright (c) 2002-2005 Hiroyuki Kondo, Hirokazu Takata, + * Hitoshi Yamamoto, Takeo Takahashi + * + * This file is subject to the terms and conditions of the GNU General + * Public License. See the file "COPYING" in the main directory of this + * archive for more details. + */ + +#include <linux/irq.h> +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/platform_device.h> + +#include <asm/m32r.h> +#include <asm/io.h> + +/* + * M32700 Interrupt Control Unit (Level 1) + */ +#define irq2port(x) (M32R_ICU_CR1_PORTL + ((x - 1) * sizeof(unsigned long))) + +icu_data_t icu_data[M32700UT_NUM_CPU_IRQ]; + +static void disable_m32700ut_irq(unsigned int irq) +{ + unsigned long port, data; + + port = irq2port(irq); + data = icu_data[irq].icucr|M32R_ICUCR_ILEVEL7; + outl(data, port); +} + +static void enable_m32700ut_irq(unsigned int irq) +{ + unsigned long port, data; + + port = irq2port(irq); + data = icu_data[irq].icucr|M32R_ICUCR_IEN|M32R_ICUCR_ILEVEL6; + outl(data, port); +} + +static void mask_m32700ut(struct irq_data *data) +{ + disable_m32700ut_irq(data->irq); +} + +static void unmask_m32700ut(struct irq_data *data) +{ + enable_m32700ut_irq(data->irq); +} + +static void shutdown_m32700ut(struct irq_data *data) +{ + unsigned long port; + + port = irq2port(data->irq); + outl(M32R_ICUCR_ILEVEL7, port); +} + +static struct irq_chip m32700ut_irq_type = +{ + .name = "M32700UT-IRQ", + .irq_shutdown = shutdown_m32700ut, + .irq_mask = mask_m32700ut, + .irq_unmask = unmask_m32700ut +}; + +/* + * Interrupt Control Unit of PLD on M32700UT (Level 2) + */ +#define irq2pldirq(x) ((x) - M32700UT_PLD_IRQ_BASE) +#define pldirq2port(x) (unsigned long)((int)PLD_ICUCR1 + \ + (((x) - 1) * sizeof(unsigned short))) + +typedef struct { + unsigned short icucr; /* ICU Control Register */ +} pld_icu_data_t; + +static pld_icu_data_t pld_icu_data[M32700UT_NUM_PLD_IRQ]; + +static void disable_m32700ut_pld_irq(unsigned int irq) +{ + unsigned long port, data; + unsigned int pldirq; + + pldirq = irq2pldirq(irq); + port = pldirq2port(pldirq); + data = pld_icu_data[pldirq].icucr|PLD_ICUCR_ILEVEL7; + outw(data, port); +} + +static void enable_m32700ut_pld_irq(unsigned int irq) +{ + unsigned long port, data; + unsigned int pldirq; + + pldirq = irq2pldirq(irq); + port = pldirq2port(pldirq); + data = pld_icu_data[pldirq].icucr|PLD_ICUCR_IEN|PLD_ICUCR_ILEVEL6; + outw(data, port); +} + +static void mask_m32700ut_pld(struct irq_data *data) +{ + disable_m32700ut_pld_irq(data->irq); +} + +static void unmask_m32700ut_pld(struct irq_data *data) +{ + enable_m32700ut_pld_irq(data->irq); + enable_m32700ut_irq(M32R_IRQ_INT1); +} + +static void shutdown_m32700ut_pld_irq(struct irq_data *data) +{ + unsigned long port; + unsigned int pldirq; + + pldirq = irq2pldirq(data->irq); + port = pldirq2port(pldirq); + outw(PLD_ICUCR_ILEVEL7, port); +} + +static struct irq_chip m32700ut_pld_irq_type = +{ + .name = "M32700UT-PLD-IRQ", + .irq_shutdown = shutdown_m32700ut_pld_irq, + .irq_mask = mask_m32700ut_pld, + .irq_unmask = unmask_m32700ut_pld, +}; + +/* + * Interrupt Control Unit of PLD on M32700UT-LAN (Level 2) + */ +#define irq2lanpldirq(x) ((x) - M32700UT_LAN_PLD_IRQ_BASE) +#define lanpldirq2port(x) (unsigned long)((int)M32700UT_LAN_ICUCR1 + \ + (((x) - 1) * sizeof(unsigned short))) + +static pld_icu_data_t lanpld_icu_data[M32700UT_NUM_LAN_PLD_IRQ]; + +static void disable_m32700ut_lanpld_irq(unsigned int irq) +{ + unsigned long port, data; + unsigned int pldirq; + + pldirq = irq2lanpldirq(irq); + port = lanpldirq2port(pldirq); + data = lanpld_icu_data[pldirq].icucr|PLD_ICUCR_ILEVEL7; + outw(data, port); +} + +static void enable_m32700ut_lanpld_irq(unsigned int irq) +{ + unsigned long port, data; + unsigned int pldirq; + + pldirq = irq2lanpldirq(irq); + port = lanpldirq2port(pldirq); + data = lanpld_icu_data[pldirq].icucr|PLD_ICUCR_IEN|PLD_ICUCR_ILEVEL6; + outw(data, port); +} + +static void mask_m32700ut_lanpld(struct irq_data *data) +{ + disable_m32700ut_lanpld_irq(data->irq); +} + +static void unmask_m32700ut_lanpld(struct irq_data *data) +{ + enable_m32700ut_lanpld_irq(data->irq); + enable_m32700ut_irq(M32R_IRQ_INT0); +} + +static void shutdown_m32700ut_lanpld(struct irq_data *data) +{ + unsigned long port; + unsigned int pldirq; + + pldirq = irq2lanpldirq(data->irq); + port = lanpldirq2port(pldirq); + outw(PLD_ICUCR_ILEVEL7, port); +} + +static struct irq_chip m32700ut_lanpld_irq_type = +{ + .name = "M32700UT-PLD-LAN-IRQ", + .irq_shutdown = shutdown_m32700ut_lanpld, + .irq_mask = mask_m32700ut_lanpld, + .irq_unmask = unmask_m32700ut_lanpld, +}; + +/* + * Interrupt Control Unit of PLD on M32700UT-LCD (Level 2) + */ +#define irq2lcdpldirq(x) ((x) - M32700UT_LCD_PLD_IRQ_BASE) +#define lcdpldirq2port(x) (unsigned long)((int)M32700UT_LCD_ICUCR1 + \ + (((x) - 1) * sizeof(unsigned short))) + +static pld_icu_data_t lcdpld_icu_data[M32700UT_NUM_LCD_PLD_IRQ]; + +static void disable_m32700ut_lcdpld_irq(unsigned int irq) +{ + unsigned long port, data; + unsigned int pldirq; + + pldirq = irq2lcdpldirq(irq); + port = lcdpldirq2port(pldirq); + data = lcdpld_icu_data[pldirq].icucr|PLD_ICUCR_ILEVEL7; + outw(data, port); +} + +static void enable_m32700ut_lcdpld_irq(unsigned int irq) +{ + unsigned long port, data; + unsigned int pldirq; + + pldirq = irq2lcdpldirq(irq); + port = lcdpldirq2port(pldirq); + data = lcdpld_icu_data[pldirq].icucr|PLD_ICUCR_IEN|PLD_ICUCR_ILEVEL6; + outw(data, port); +} + +static void mask_m32700ut_lcdpld(struct irq_data *data) +{ + disable_m32700ut_lcdpld_irq(data->irq); +} + +static void unmask_m32700ut_lcdpld(struct irq_data *data) +{ + enable_m32700ut_lcdpld_irq(data->irq); + enable_m32700ut_irq(M32R_IRQ_INT2); +} + +static void shutdown_m32700ut_lcdpld(struct irq_data *data) +{ + unsigned long port; + unsigned int pldirq; + + pldirq = irq2lcdpldirq(data->irq); + port = lcdpldirq2port(pldirq); + outw(PLD_ICUCR_ILEVEL7, port); +} + +static struct irq_chip m32700ut_lcdpld_irq_type = +{ + .name = "M32700UT-PLD-LCD-IRQ", + .irq_shutdown = shutdown_m32700ut_lcdpld, + .irq_mask = mask_m32700ut_lcdpld, + .irq_unmask = unmask_m32700ut_lcdpld, +}; + +void __init init_IRQ(void) +{ +#if defined(CONFIG_SMC91X) + /* INT#0: LAN controller on M32700UT-LAN (SMC91C111)*/ + irq_set_chip_and_handler(M32700UT_LAN_IRQ_LAN, + &m32700ut_lanpld_irq_type, handle_level_irq); + lanpld_icu_data[irq2lanpldirq(M32700UT_LAN_IRQ_LAN)].icucr = PLD_ICUCR_IEN|PLD_ICUCR_ISMOD02; /* "H" edge sense */ + disable_m32700ut_lanpld_irq(M32700UT_LAN_IRQ_LAN); +#endif /* CONFIG_SMC91X */ + + /* MFT2 : system timer */ + irq_set_chip_and_handler(M32R_IRQ_MFT2, &m32700ut_irq_type, + handle_level_irq); + icu_data[M32R_IRQ_MFT2].icucr = M32R_ICUCR_IEN; + disable_m32700ut_irq(M32R_IRQ_MFT2); + + /* SIO0 : receive */ + irq_set_chip_and_handler(M32R_IRQ_SIO0_R, &m32700ut_irq_type, + handle_level_irq); + icu_data[M32R_IRQ_SIO0_R].icucr = 0; + disable_m32700ut_irq(M32R_IRQ_SIO0_R); + + /* SIO0 : send */ + irq_set_chip_and_handler(M32R_IRQ_SIO0_S, &m32700ut_irq_type, + handle_level_irq); + icu_data[M32R_IRQ_SIO0_S].icucr = 0; + disable_m32700ut_irq(M32R_IRQ_SIO0_S); + + /* SIO1 : receive */ + irq_set_chip_and_handler(M32R_IRQ_SIO1_R, &m32700ut_irq_type, + handle_level_irq); + icu_data[M32R_IRQ_SIO1_R].icucr = 0; + disable_m32700ut_irq(M32R_IRQ_SIO1_R); + + /* SIO1 : send */ + irq_set_chip_and_handler(M32R_IRQ_SIO1_S, &m32700ut_irq_type, + handle_level_irq); + icu_data[M32R_IRQ_SIO1_S].icucr = 0; + disable_m32700ut_irq(M32R_IRQ_SIO1_S); + + /* DMA1 : */ + irq_set_chip_and_handler(M32R_IRQ_DMA1, &m32700ut_irq_type, + handle_level_irq); + icu_data[M32R_IRQ_DMA1].icucr = 0; + disable_m32700ut_irq(M32R_IRQ_DMA1); + +#ifdef CONFIG_SERIAL_M32R_PLDSIO + /* INT#1: SIO0 Receive on PLD */ + irq_set_chip_and_handler(PLD_IRQ_SIO0_RCV, &m32700ut_pld_irq_type, + handle_level_irq); + pld_icu_data[irq2pldirq(PLD_IRQ_SIO0_RCV)].icucr = PLD_ICUCR_IEN|PLD_ICUCR_ISMOD03; + disable_m32700ut_pld_irq(PLD_IRQ_SIO0_RCV); + + /* INT#1: SIO0 Send on PLD */ + irq_set_chip_and_handler(PLD_IRQ_SIO0_SND, &m32700ut_pld_irq_type, + handle_level_irq); + pld_icu_data[irq2pldirq(PLD_IRQ_SIO0_SND)].icucr = PLD_ICUCR_IEN|PLD_ICUCR_ISMOD03; + disable_m32700ut_pld_irq(PLD_IRQ_SIO0_SND); +#endif /* CONFIG_SERIAL_M32R_PLDSIO */ + + /* INT#1: CFC IREQ on PLD */ + irq_set_chip_and_handler(PLD_IRQ_CFIREQ, &m32700ut_pld_irq_type, + handle_level_irq); + pld_icu_data[irq2pldirq(PLD_IRQ_CFIREQ)].icucr = PLD_ICUCR_IEN|PLD_ICUCR_ISMOD01; /* 'L' level sense */ + disable_m32700ut_pld_irq(PLD_IRQ_CFIREQ); + + /* INT#1: CFC Insert on PLD */ + irq_set_chip_and_handler(PLD_IRQ_CFC_INSERT, &m32700ut_pld_irq_type, + handle_level_irq); + pld_icu_data[irq2pldirq(PLD_IRQ_CFC_INSERT)].icucr = PLD_ICUCR_IEN|PLD_ICUCR_ISMOD00; /* 'L' edge sense */ + disable_m32700ut_pld_irq(PLD_IRQ_CFC_INSERT); + + /* INT#1: CFC Eject on PLD */ + irq_set_chip_and_handler(PLD_IRQ_CFC_EJECT, &m32700ut_pld_irq_type, + handle_level_irq); + pld_icu_data[irq2pldirq(PLD_IRQ_CFC_EJECT)].icucr = PLD_ICUCR_IEN|PLD_ICUCR_ISMOD02; /* 'H' edge sense */ + disable_m32700ut_pld_irq(PLD_IRQ_CFC_EJECT); + + /* + * INT0# is used for LAN, DIO + * We enable it here. + */ + icu_data[M32R_IRQ_INT0].icucr = M32R_ICUCR_IEN|M32R_ICUCR_ISMOD11; + enable_m32700ut_irq(M32R_IRQ_INT0); + + /* + * INT1# is used for UART, MMC, CF Controller in FPGA. + * We enable it here. + */ + icu_data[M32R_IRQ_INT1].icucr = M32R_ICUCR_IEN|M32R_ICUCR_ISMOD11; + enable_m32700ut_irq(M32R_IRQ_INT1); + +#if defined(CONFIG_USB) + outw(USBCR_OTGS, USBCR); /* USBCR: non-OTG */ + irq_set_chip_and_handler(M32700UT_LCD_IRQ_USB_INT1, + &m32700ut_lcdpld_irq_type, handle_level_irq); + + lcdpld_icu_data[irq2lcdpldirq(M32700UT_LCD_IRQ_USB_INT1)].icucr = PLD_ICUCR_IEN|PLD_ICUCR_ISMOD01; /* "L" level sense */ + disable_m32700ut_lcdpld_irq(M32700UT_LCD_IRQ_USB_INT1); +#endif + /* + * INT2# is used for BAT, USB, AUDIO + * We enable it here. + */ + icu_data[M32R_IRQ_INT2].icucr = M32R_ICUCR_IEN|M32R_ICUCR_ISMOD01; + enable_m32700ut_irq(M32R_IRQ_INT2); + +#if defined(CONFIG_VIDEO_M32R_AR) + /* + * INT3# is used for AR + */ + irq_set_chip_and_handler(M32R_IRQ_INT3, &m32700ut_irq_type, + handle_level_irq); + icu_data[M32R_IRQ_INT3].icucr = M32R_ICUCR_IEN|M32R_ICUCR_ISMOD10; + disable_m32700ut_irq(M32R_IRQ_INT3); +#endif /* CONFIG_VIDEO_M32R_AR */ +} + +#if defined(CONFIG_SMC91X) + +#define LAN_IOSTART 0x300 +#define LAN_IOEND 0x320 +static struct resource smc91x_resources[] = { + [0] = { + .start = (LAN_IOSTART), + .end = (LAN_IOEND), + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = M32700UT_LAN_IRQ_LAN, + .end = M32700UT_LAN_IRQ_LAN, + .flags = IORESOURCE_IRQ, + } +}; + +static struct platform_device smc91x_device = { + .name = "smc91x", + .id = 0, + .num_resources = ARRAY_SIZE(smc91x_resources), + .resource = smc91x_resources, +}; +#endif + +#if defined(CONFIG_FB_S1D13XXX) + +#include <video/s1d13xxxfb.h> +#include <asm/s1d13806.h> + +static struct s1d13xxxfb_pdata s1d13xxxfb_data = { + .initregs = s1d13xxxfb_initregs, + .initregssize = ARRAY_SIZE(s1d13xxxfb_initregs), + .platform_init_video = NULL, +#ifdef CONFIG_PM + .platform_suspend_video = NULL, + .platform_resume_video = NULL, +#endif +}; + +static struct resource s1d13xxxfb_resources[] = { + [0] = { + .start = 0x10600000UL, + .end = 0x1073FFFFUL, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = 0x10400000UL, + .end = 0x104001FFUL, + .flags = IORESOURCE_MEM, + } +}; + +static struct platform_device s1d13xxxfb_device = { + .name = S1D_DEVICENAME, + .id = 0, + .dev = { + .platform_data = &s1d13xxxfb_data, + }, + .num_resources = ARRAY_SIZE(s1d13xxxfb_resources), + .resource = s1d13xxxfb_resources, +}; +#endif + +static int __init platform_init(void) +{ +#if defined(CONFIG_SMC91X) + platform_device_register(&smc91x_device); +#endif +#if defined(CONFIG_FB_S1D13XXX) + platform_device_register(&s1d13xxxfb_device); +#endif + return 0; +} +arch_initcall(platform_init); diff --git a/arch/m32r/platforms/mappi/Makefile b/arch/m32r/platforms/mappi/Makefile new file mode 100644 index 000000000..0de59084f --- /dev/null +++ b/arch/m32r/platforms/mappi/Makefile @@ -0,0 +1 @@ +obj-y := setup.o io.o diff --git a/arch/m32r/platforms/mappi/dot.gdbinit b/arch/m32r/platforms/mappi/dot.gdbinit new file mode 100644 index 000000000..7a1d29386 --- /dev/null +++ b/arch/m32r/platforms/mappi/dot.gdbinit @@ -0,0 +1,242 @@ +# .gdbinit file +# $Id: dot.gdbinit.mappi,v 1.4 2004/10/20 02:24:37 takata Exp $ +#----- +# NOTE: this file is generated by a script, "gen_gdbinit.pl". +# (Please type "gen_gdbinit.pl --help" and check the help message). +# $ Id: gen_gdbinit.pl,v 1.12 2004/07/26 09:56:10 takata Exp $ +#----- +# target platform: mappi + +# setting +set width 0d70 +set radix 0d16 +debug_chaos + +# clk xin:cpu:bif:bus=30:360:180:90 +define clock_init + set *(unsigned long *)0x00ef4024 = 2 + set *(unsigned long *)0x00ef4020 = 1 + set *(unsigned long *)0x00ef4010 = 0 + set *(unsigned long *)0x00ef4014 = 0 + set *(unsigned long *)0x00ef4004 = 5 + shell sleep 0.1 + set *(unsigned long *)0x00ef4008 = 0x00000200 +end + +# Initialize programmable ports +define port_init + set $sfrbase = 0x00ef0000 + set *(unsigned short *)0x00ef1060 = 0x5555 + set *(unsigned short *)0x00ef1062 = 0x5555 + set *(unsigned short *)0x00ef1064 = 0x5555 + set *(unsigned short *)0x00ef1066 = 0x5555 + set *(unsigned short *)0x00ef1068 = 0x5555 + set *(unsigned short *)0x00ef106a = 0x0000 + set *(unsigned short *)0x00ef106e = 0x5555 + set *(unsigned short *)0x00ef1070 = 0x5555 + # LED ON + set *(unsigned char *)($sfrbase + 0x1015) = 0xff + set *(unsigned char *)($sfrbase + 0x1085) = 0xff + shell sleep 0.1 + # LED OFF + set *(unsigned char *)($sfrbase + 0x1085) = 0x00 +end +document port_init + P5=LED(output), P6.b4=LAN_RESET(output) +end + +# Initialize SDRAM controller +define sdram_init + # SDIR0 + set *(unsigned long *)0x00ef6008 = 0x00000182 + # SDIR1 + set *(unsigned long *)0x00ef600c = 0x00000001 + # Initialize wait + shell sleep 0.1 + # Ch0-MOD + set *(unsigned long *)0x00ef602c = 0x00000020 + # Ch0-TR + set *(unsigned long *)0x00ef6028 = 0x00051502 + # Ch0-ADR (size:64MB) + set *(unsigned long *)0x00ef6020 = 0x08000004 + # AutoRef On + set *(unsigned long *)0x00ef6004 = 0x00010e2b + # Access enable + set *(unsigned long *)0x00ef6024 = 0x00000001 +end +document sdram_init + SDRAM controller initialization + 0x08000000 - 0x0bffffff (64MB) +end + +# Initialize LAN controller +define lanc_init + set $sfrbase = 0x00ef0000 + # Set BSEL3 (BSEL3 for the Chaos's bselc) + set *(unsigned long *)($sfrbase + 0x5300) = 0x0a0a8040 + set *(unsigned long *)($sfrbase + 0x5304) = 0x01120203 + set *(unsigned long *)($sfrbase + 0x5308) = 0x00000001 + # Reset (P5=LED,P6.b4=LAN_RESET) + set *(unsigned short *)($sfrbase + 0x106c) = 0x0000 + set *(unsigned char *)($sfrbase + 0x1016) = 0xff + set *(unsigned char *)($sfrbase + 0x1086) = 0xff + shell sleep 0.1 + # swivel: 0=normal, 4=reverse +# set *(unsigned char *)($sfrbase + 0x1086) = 0x00 + set *(unsigned char *)($sfrbase + 0x1086) = 0x04 + set *(unsigned long *)(0x0c000330) = 0xffffffff + # Set mac address + set $lanc = (void*)0x0c000300 + set *(unsigned long *)($lanc + 0x0000) = 0x00610010 + set *(unsigned long *)($lanc + 0x0004) = 0x00200030 + set *(unsigned long *)($lanc + 0x0008) = 0x00400050 + set *(unsigned long *)($lanc + 0x000c) = 0x00600007 +end +document lanc_init + LAN controller initialization + ex.) MAC address: 10 20 30 40 50 60 +end + +# LCD & CRT dual-head setting (8bpp) +define dispc_init + set $sfrbase = 0x00ef0000 + # BSEL4 Dispc + set *(unsigned long *)($sfrbase + 0x5400) = 0x0e0e8000 + set *(unsigned long *)($sfrbase + 0x5404) = 0x0012220a +end + +# MMU enable +define mmu_enable + set $evb=0x88000000 + set *(unsigned long *)0xffff0024=1 +end + +# MMU disable +define mmu_disable + set $evb=0 + set *(unsigned long *)0xffff0024=0 +end + +# Show TLB entries +define show_tlb_entries + set $i = 0 + set $addr = $arg0 + set $nr_entries = $arg1 + use_mon_code + while ($i < $nr_entries) + set $tlb_tag = *(unsigned long*)$addr + set $tlb_data = *(unsigned long*)($addr + 4) + printf " [%2d] 0x%08lx : 0x%08lx - 0x%08lx\n", $i, $addr, $tlb_tag, $tlb_data + set $i = $i + 1 + set $addr = $addr + 8 + end + use_debug_dma +end +define itlb + set $itlb=0xfe000000 + show_tlb_entries $itlb 0d32 +end +define dtlb + set $dtlb=0xfe000800 + show_tlb_entries $dtlb 0d32 +end + +# Show current task structure +define show_current + set $current = $spi & 0xffffe000 + printf "$current=0x%08lX\n",$current + print *(struct task_struct *)$current +end + +# Show user assigned task structure +define show_task + set = $arg0 & 0xffffe000 + printf "$task=0x%08lX\n",$task + print *(struct task_struct *)$task +end +document show_task + Show user assigned task structure + arg0 : task structure address +end + +# Show M32R registers +define show_regs + printf " R0[0x%08lX] R1[0x%08lX] R2[0x%08lX] R3[0x%08lX]\n",$r0,$r1,$r2,$r3 + printf " R4[0x%08lX] R5[0x%08lX] R6[0x%08lX] R7[0x%08lX]\n",$r4,$r5,$r6,$r7 + printf " R8[0x%08lX] R9[0x%08lX] R10[0x%08lX] R11[0x%08lX]\n",$r8,$r9,$r10,$r11 + printf "R12[0x%08lX] FP[0x%08lX] LR[0x%08lX] SP[0x%08lX]\n",$r12,$fp,$lr,$sp + printf "PSW[0x%08lX] CBR[0x%08lX] SPI[0x%08lX] SPU[0x%08lX]\n",$psw,$cbr,$spi,$spu + printf "BPC[0x%08lX] PC[0x%08lX] ACCL[0x%08lX] ACCH[0x%08lX]\n",$bpc,$pc,$accl,$acch + printf "EVB[0x%08lX]\n",$evb +end + +# Setup all +define setup + use_mon_code + set *(unsigned int)0xfffffffc=0x60 + shell sleep 0.1 + clock_init + shell sleep 0.1 + port_init + sdram_init + lanc_init + dispc_init + set $evb=0x08000000 +end + +# Load modules +define load_modules + use_debug_dma + load +end + +# Set kernel parameters +define set_kernel_parameters + set $param = (void*)0x08001000 + # INITRD_START +# set *(unsigned long *)($param + 0x0010) = 0x08300000 + # INITRD_SIZE +# set *(unsigned long *)($param + 0x0014) = 0x00000000 + # M32R_CPUCLK + set *(unsigned long *)($param + 0x0018) = 0d360000000 + # M32R_BUSCLK + set *(unsigned long *)($param + 0x001c) = 0d90000000 + + # M32R_TIMER_DIVIDE + set *(unsigned long *)($param + 0x0020) = 0d128 + + set {char[0x200]}($param + 0x100) = "console=ttyS0,115200n8x console=tty1 root=/dev/nfsroot nfsroot=192.168.0.1:/project/m32r-linux/export/rootfs nfsaddrs=192.168.0.101:192.168.0.1:192.168.0.1:255.255.255.0:mappi001 \0" +end + +# Boot +define boot + set_kernel_parameters + set $fp = 0 + set $pc = 0x08002000 + si + c +end + +# Set breakpoints +define set_breakpoints + b *0x08000030 +end + +# Restart +define restart + sdireset + sdireset + setup + load_modules + boot +end + +sdireset +sdireset +file vmlinux +target m32rsdi +setup +#load_modules +#set_breakpoints +#boot + diff --git a/arch/m32r/platforms/mappi/dot.gdbinit.nommu b/arch/m32r/platforms/mappi/dot.gdbinit.nommu new file mode 100644 index 000000000..297536cf6 --- /dev/null +++ b/arch/m32r/platforms/mappi/dot.gdbinit.nommu @@ -0,0 +1,245 @@ +# .gdbinit file +# $Id$ +#----- +# NOTE: this file is generated by a script, "gen_gdbinit.pl". +# (Please type "gen_gdbinit.pl --help" and check the help message). +# $ Id: gen_gdbinit.pl,v 1.5 2004/01/23 08:23:25 takata Exp $ +#----- +# target platform: mappi + +# setting +set width 0d70 +set radix 0d16 +debug_chaos + +# clk xin:cpu:bif:bus=25:200:50:50 +define clock_init + set *(unsigned long *)0x00ef4024 = 2 + set *(unsigned long *)0x00ef4020 = 2 + set *(unsigned long *)0x00ef4010 = 0 + set *(unsigned long *)0x00ef4014 = 0 + set *(unsigned long *)0x00ef4004 = 3 + shell sleep 0.1 + set *(unsigned long *)0x00ef4008 = 0x00000200 +end + +# Initialize programmable ports +define port_init + set $sfrbase = 0x00ef0000 + set *(unsigned short *)0x00ef1060 = 0x5555 + set *(unsigned short *)0x00ef1062 = 0x5555 + set *(unsigned short *)0x00ef1064 = 0x5555 + set *(unsigned short *)0x00ef1066 = 0x5555 + set *(unsigned short *)0x00ef1068 = 0x5555 + set *(unsigned short *)0x00ef106a = 0x0000 + set *(unsigned short *)0x00ef106e = 0x5555 + set *(unsigned short *)0x00ef1070 = 0x5555 + # LED ON + set *(unsigned char *)($sfrbase + 0x1015) = 0xff + set *(unsigned char *)($sfrbase + 0x1085) = 0xff + shell sleep 0.1 + # LED OFF + set *(unsigned char *)($sfrbase + 0x1085) = 0x00 +end +document port_init + P5=LED(output), P6.b4=LAN_RESET(output) +end + +# Initialize SDRAM controller +define sdram_init + # SDIR0 + set *(unsigned long *)0x00ef6008 = 0x00000182 + # SDIR1 + set *(unsigned long *)0x00ef600c = 0x00000001 + # Initialize wait + shell sleep 0.1 + # Ch0-MOD + set *(unsigned long *)0x00ef602c = 0x00000020 + # Ch0-TR + set *(unsigned long *)0x00ef6028 = 0x00051502 + # Ch0-ADR (size:64MB) + set *(unsigned long *)0x00ef6020 = 0x00000004 + # AutoRef On + set *(unsigned long *)0x00ef6004 = 0x00010f05 + # Access enable + set *(unsigned long *)0x00ef6024 = 0x00000001 +end +document sdram_init + SDRAM controller initialization + 0x08000000 - 0x0bffffff (64MB) +end + +# Initialize LAN controller +define lanc_init + set $sfrbase = 0x00ef0000 + # Set BSEL3 (BSEL3 for the Chaos's bselc) + set *(unsigned long *)($sfrbase + 0x5300) = 0x07078040 + set *(unsigned long *)($sfrbase + 0x5304) = 0x01110102 + set *(unsigned long *)($sfrbase + 0x5308) = 0x00000001 + # Reset (P5=LED,P6.b4=LAN_RESET) + set *(unsigned short *)($sfrbase + 0x106c) = 0x0000 + set *(unsigned char *)($sfrbase + 0x1016) = 0xff + set *(unsigned char *)($sfrbase + 0x1086) = 0xff + shell sleep 0.1 + # swivel: 0=normal, 4=reverse +# set *(unsigned char *)($sfrbase + 0x1086) = 0x00 + set *(unsigned char *)($sfrbase + 0x1086) = 0x04 + set *(unsigned long *)(0x0c000330) = 0xffffffff + # Set mac address + set $lanc = (void*)0x0c000300 + set *(unsigned long *)($lanc + 0x0000) = 0x00610010 + set *(unsigned long *)($lanc + 0x0004) = 0x00200030 + set *(unsigned long *)($lanc + 0x0008) = 0x00400050 + set *(unsigned long *)($lanc + 0x000c) = 0x00600007 +end +document lanc_init + LAN controller initialization + ex.) MAC address: 10 20 30 40 50 60 +end + +# LCD & CRT dual-head setting (8bpp) +define dispc_init + set $sfrbase = 0x00ef0000 + # BSEL4 Dispc + set *(unsigned long *)($sfrbase + 0x5400) = 0x06078000 + set *(unsigned long *)($sfrbase + 0x5404) = 0x00101101 +end + +# MMU enable +define mmu_enable + set $evb=0x88000000 + set *(unsigned long *)0xffff0024=1 +end + +# MMU disable +define mmu_disable + set $evb=0 + set *(unsigned long *)0xffff0024=0 +end + +# Show TLB entries +define show_tlb_entries + set $i = 0 + set $addr = $arg0 + set $nr_entries = $arg1 + use_mon_code + while ($i < $nr_entries) + set $tlb_tag = *(unsigned long*)$addr + set $tlb_data = *(unsigned long*)($addr + 4) + printf " [%2d] 0x%08lx : 0x%08lx - 0x%08lx\n", $i, $addr, $tlb_tag, $tlb_data + set $i = $i + 1 + set $addr = $addr + 8 + end + use_debug_dma +end +define itlb + set $itlb=0xfe000000 + show_tlb_entries $itlb 0d32 +end +define dtlb + set $dtlb=0xfe000800 + show_tlb_entries $dtlb 0d32 +end + +# Show current task structure +define show_current + set $current = $spi & 0xffffe000 + printf "$current=0x%08lX\n",$current + print *(struct task_struct *)$current +end + +# Show user assigned task structure +define show_task + set = $arg0 & 0xffffe000 + printf "$task=0x%08lX\n",$task + print *(struct task_struct *)$task +end +document show_task + Show user assigned task structure + arg0 : task structure address +end + +# Show M32R registers +define show_regs + printf " R0[0x%08lX] R1[0x%08lX] R2[0x%08lX] R3[0x%08lX]\n",$r0,$r1,$r2,$r3 + printf " R4[0x%08lX] R5[0x%08lX] R6[0x%08lX] R7[0x%08lX]\n",$r4,$r5,$r6,$r7 + printf " R8[0x%08lX] R9[0x%08lX] R10[0x%08lX] R11[0x%08lX]\n",$r8,$r9,$r10,$r11 + printf "R12[0x%08lX] FP[0x%08lX] LR[0x%08lX] SP[0x%08lX]\n",$r12,$fp,$lr,$sp + printf "PSW[0x%08lX] CBR[0x%08lX] SPI[0x%08lX] SPU[0x%08lX]\n",$psw,$cbr,$spi,$spu + printf "BPC[0x%08lX] PC[0x%08lX] ACCL[0x%08lX] ACCH[0x%08lX]\n",$bpc,$pc,$accl,$acch + printf "EVB[0x%08lX]\n",$evb +end + +# Setup all +define setup + use_mon_code + set *(unsigned int)0xfffffffc=0x60 + shell sleep 0.1 + clock_init + shell sleep 0.1 + port_init + sdram_init + lanc_init + dispc_init + set $evb=0x00000000 +end + +# Load modules +define load_modules + use_debug_dma + load +end + +# Set kernel parameters +define set_kernel_parameters + set $param = (void*)0x00001000 + # INITRD_START + #set *(unsigned long *)($param + 0x0010) = 0x082a0000 + # INITRD_SIZE + #set *(unsigned long *)($param + 0x0014) = 0x00000000 + # M32R_CPUCLK + set *(unsigned long *)($param + 0x0018) = 0d200000000 + # M32R_BUSCLK + set *(unsigned long *)($param + 0x001c) = 0d50000000 + + # M32R_TIMER_DIVIDE + set *(unsigned long *)($param + 0x0020) = 0d128 + + set {char[0x200]}($param + 0x100) = "console=ttyS0,115200n8x root=/dev/nfsroot nfsroot=192.168.0.1:/project/m32r-linux/export/root.bbox-httpd nfsaddrs=192.168.0.101:192.168.0.1:192.168.0.1:255.255.255.0:mappi001 \0" +end + +# Boot +define boot + set_kernel_parameters + set $fp = 0 + set $pc=0x00002000 + set *(long *)0xfffffff4=0x8080 +# b load_flat_binary +# set *(unsigned char *)0x08001003=0x63 +# set *(unsigned char *)0x08001003=0x02 + si +# c +end + +# Set breakpoints +define set_breakpoints + b *0x08000030 +end + +# Restart +define restart + sdireset + sdireset + setup + load_modules + boot +end + +sdireset +sdireset +file vmlinux +target m32rsdi +setup +load_modules +boot + diff --git a/arch/m32r/platforms/mappi/dot.gdbinit.smp b/arch/m32r/platforms/mappi/dot.gdbinit.smp new file mode 100644 index 000000000..171489a44 --- /dev/null +++ b/arch/m32r/platforms/mappi/dot.gdbinit.smp @@ -0,0 +1,344 @@ +# .gdbinit file +# $Id$ + +# setting +set width 0d70 +set radix 0d16 +debug_chaos + +# clk xin:cpu:bif:bus=1:4:2:1 +define clock_init_on + set *(unsigned long *)0x00ef4024 = 2 + set *(unsigned long *)0x00ef4020 = 1 + set *(unsigned long *)0x00ef4010 = 0 + set *(unsigned long *)0x00ef4014 = 0 + set *(unsigned long *)0x00ef4004 = 0x1 + shell sleep 0.1 + set *(unsigned long *)0x00ef4008 = 0x0200 +# set *(unsigned long *)0x00ef4008 = 0x0201 +end + +# clk xin:cpu:bif:bus=1:4:1:1 +define clock_init_on_1411 + set *(unsigned long *)0x00ef4024 = 2 + set *(unsigned long *)0x00ef4020 = 2 + set *(unsigned long *)0x00ef4010 = 0 + set *(unsigned long *)0x00ef4014 = 0 + set *(unsigned long *)0x00ef4004 = 0x1 + shell sleep 0.1 + set *(unsigned long *)0x00ef4008 = 0x0200 +end + +# clk xin:cpu:bif:bus=1:4:2:1 +define clock_init_on_1421 + set *(unsigned long *)0x00ef4024 = 2 + set *(unsigned long *)0x00ef4020 = 1 + set *(unsigned long *)0x00ef4010 = 0 + set *(unsigned long *)0x00ef4014 = 0 + set *(unsigned long *)0x00ef4004 = 0x1 + shell sleep 0.1 + set *(unsigned long *)0x00ef4008 = 0x0200 +end + +# clk xin:cpu:bif:bus=1:8:2:1 +define clock_init_on_1821 + set *(unsigned long *)0x00ef4024 = 3 + set *(unsigned long *)0x00ef4020 = 2 + set *(unsigned long *)0x00ef4010 = 0 + set *(unsigned long *)0x00ef4014 = 0 + set *(unsigned long *)0x00ef4004 = 0x3 + shell sleep 0.1 + set *(unsigned long *)0x00ef4008 = 0x0200 +end + +# clk xin:cpu:bif:bus=1:8:4:1 +define clock_init_on_1841 + set *(unsigned long *)0x00ef4024 = 3 + set *(unsigned long *)0x00ef4020 = 1 + set *(unsigned long *)0x00ef4010 = 0 + set *(unsigned long *)0x00ef4014 = 0 + set *(unsigned long *)0x00ef4004 = 0x3 + shell sleep 0.1 + set *(unsigned long *)0x00ef4008 = 0x0200 +end + +# clk xin:cpu:bif:bus=1:16:8:1 +define clock_init_on_11681 + set *(unsigned long *)0x00ef4024 = 4 + set *(unsigned long *)0x00ef4020 = 2 + set *(unsigned long *)0x00ef4010 = 0 + set *(unsigned long *)0x00ef4014 = 0 + set *(unsigned long *)0x00ef4004 = 0x7 + shell sleep 0.1 + set *(unsigned long *)0x00ef4008 = 0x0200 +end + +# clk xin:cpu:bif:bus=1:1:1:1 +define clock_init_off + # CPU + set *(unsigned long *)0x00ef4010 = 0 + set *(unsigned long *)0x00ef4014 = 0 + # BIF + set *(unsigned long *)0x00ef4020 = 0 + # BUS + set *(unsigned long *)0x00ef4024 = 0 + # PLL + set *(unsigned long *)0x00ef4008 = 0x0000 +end + +# Initialize programmable ports +define port_init + set $sfrbase = 0x00ef0000 + set *(unsigned short *)0x00ef1060 = 0x5555 + set *(unsigned short *)0x00ef1062 = 0x5555 + set *(unsigned short *)0x00ef1064 = 0x5555 + set *(unsigned short *)0x00ef1066 = 0x5555 + set *(unsigned short *)0x00ef1068 = 0x5555 + set *(unsigned short *)0x00ef106a = 0x0000 + set *(unsigned short *)0x00ef106e = 0x5555 + set *(unsigned short *)0x00ef1070 = 0x5555 + # LED ON + set *(unsigned char *)($sfrbase + 0x1015) = 0xff + set *(unsigned char *)($sfrbase + 0x1085) = 0xff + shell sleep 0.1 + # LED OFF + set *(unsigned char *)($sfrbase + 0x1085) = 0x00 +end +document port_init + P5=LED(output), P6.b4=LAN_RESET(output) +end + +# Initialize SDRAM controller for Mappi +define sdram_init + # SDIR0 + set *(unsigned long *)0x00ef6008 = 0x00000182 + # SDIR1 + set *(unsigned long *)0x00ef600c = 0x00000001 + # Initialize wait + shell sleep 0.1 + # Ch0-MOD + set *(unsigned long *)0x00ef602c = 0x00000020 + # Ch0-TR + set *(unsigned long *)0x00ef6028 = 0x00010002 + # Ch0-ADR + set *(unsigned long *)0x00ef6020 = 0x08000004 + # AutoRef On + set *(unsigned long *)0x00ef6004 = 0x00010107 + # Access enable + set *(unsigned long *)0x00ef6024 = 0x00000001 +end +document sdram_init + Mappi SDRAM controller initialization + 0x08000000 - 0x0bffffff (64MB) +end + +# Initialize LAN controller for Mappi +define lanc_init + set $sfrbase = 0x00ef0000 + # Set BSEL3 (BSEL3 for the Chaos's bselc) +# set *(unsigned long *)($sfrbase + 0x5300) = 0x01018040 +# set *(unsigned long *)($sfrbase + 0x5304) = 0x01011101 + set *(unsigned long *)($sfrbase + 0x5300) = 0x04048000 + set *(unsigned long *)($sfrbase + 0x5304) = 0x01011103 + set *(unsigned long *)($sfrbase + 0x5308) = 0x00000001 + # Reset (P5=LED,P6.b4=LAN_RESET) + set *(unsigned short *)($sfrbase + 0x106c) = 0x0000 + set *(unsigned char *)($sfrbase + 0x1016) = 0xff + set *(unsigned char *)($sfrbase + 0x1086) = 0xff + shell sleep 0.1 +# set *(unsigned char *)($sfrbase + 0x1086) = 0x00 + set *(unsigned char *)($sfrbase + 0x1086) = 0x04 + set *(unsigned long *)(0x0c000330) = 0xffffffff + # Set mac address + set $lanc = (void*)0x0c000300 + set *(unsigned long *)($lanc + 0x0000) = 0x00610010 + set *(unsigned long *)($lanc + 0x0004) = 0x00200030 + set *(unsigned long *)($lanc + 0x0008) = 0x00400050 + set *(unsigned long *)($lanc + 0x000c) = 0x00600007 +end +document lanc_init + Mappi LAN controller initialization + ex.) MAC address: 10 20 30 40 50 60 +end + +# LCD & CRT dual-head setting (8bpp) +define dispc_init + set $sfrbase = 0x00ef0000 + # BSEL4 Dispc + # 20MHz +# set *(unsigned long *)($sfrbase + 0x5400) = 0x02028282 +# set *(unsigned long *)($sfrbase + 0x5404) = 0x00122202 + # 40MHz + set *(unsigned long *)($sfrbase + 0x5400) = 0x04048000 + set *(unsigned long *)($sfrbase + 0x5404) = 0x00101103 +end + +# MMU enable +define mmu_enable + set $evb=0x88000000 + set *(unsigned long *)0xffff0024=1 +end + +# MMU disable +define mmu_disable + set $evb=0 + set *(unsigned long *)0xffff0024=0 +end + +# Show TLB entries +define show_tlb_entries + set $i = 0 + set $addr = $arg0 + use_mon_code + while ($i < 0d32 ) + set $tlb_tag = *(unsigned long*)$addr + set $tlb_data = *(unsigned long*)($addr + 4) + printf " [%2d] 0x%08lx : 0x%08lx - 0x%08lx\n", $i, $addr, $tlb_tag, $tlb_data + set $i = $i + 1 + set $addr = $addr + 8 + end + use_debug_dma +end +define itlb + set $itlb=0xfe000000 + show_tlb_entries $itlb +end +define dtlb + set $dtlb=0xfe000800 + show_tlb_entries $dtlb +end + + +# Show current task structure +define show_current + set $current = $spi & 0xffffe000 + printf "$current=0x%08lX\n",$current + print *(struct task_struct *)$current +end + +# Show user assigned task structure +define show_task + set $task = $arg0 & 0xffffe000 + printf "$task=0x%08lX\n",$task + print *(struct task_struct *)$task +end +document show_task + Show user assigned task structure + arg0 : task structure address +end + +# Show M32R registers +define show_regs + printf " R0[0x%08lX] R1[0x%08lX] R2[0x%08lX] R3[0x%08lX]\n",$r0,$r1,$r2,$r3 + printf " R4[0x%08lX] R5[0x%08lX] R6[0x%08lX] R7[0x%08lX]\n",$r4,$r5,$r6,$r7 + printf " R8[0x%08lX] R9[0x%08lX] R10[0x%08lX] R11[0x%08lX]\n",$r8,$r9,$r10,$r11 + printf "R12[0x%08lX] FP[0x%08lX] LR[0x%08lX] SP[0x%08lX]\n",$r12,$fp,$lr,$fp + printf "PSW[0x%08lX] CBR[0x%08lX] SPI[0x%08lX] SPU[0x%08lX]\n",$psw,$cbr,$spi,$spu + printf "BPC[0x%08lX] PC[0x%08lX] ACCL[0x%08lX] ACCH[0x%08lX]\n",$bpc,$pc,$accl,$acch + printf "EVB[0x%08lX]\n",$evb +end + + +# Setup all +define setup + use_mon_code + set *(unsigned int)0xfffffffc=0x60 + shell sleep 0.1 +# clock_init_on_1411 + clock_init_on_1421 +# clock_init_on_1821 +# clock_init_on_1841 +# clock_init_on_11681 +# clock_init_off + shell sleep 0.1 + port_init + sdram_init + lanc_init + dispc_init + set $evb=0x08000000 +end + +# Load modules +define load_modules + use_debug_dma + load +# load ramdisk_082a0000.mot +# load romfs_082a0000.mot +# use_mon_code +end + +# Set kernel parameters +define set_kernel_parameters + set $param = (void*)0x08001000 + # INITRD_START +# set *(unsigned long *)($param + 0x0010) = 0x082a0000 + # INITRD_SIZE +# set *(unsigned long *)($param + 0x0014) = 0x00000000 + # M32R_CPUCLK + set *(unsigned long *)($param + 0x0018) = 0d160000000 +# set *(unsigned long *)($param + 0x0018) = 0d80000000 +# set *(unsigned long *)($param + 0x0018) = 0d40000000 + # M32R_BUSCLK + set *(unsigned long *)($param + 0x001c) = 0d40000000 + + # M32R_TIMER_DIVIDE + set *(unsigned long *)($param + 0x0020) = 0d128 + + set {char[0x200]}($param + 0x100) = "console=tty1 console=ttyS0,115200n8x root=/dev/nfsroot nfsroot=192.168.0.1:/project/m32r-linux/export/root.x nfsaddrs=192.168.0.101:192.168.0.1:192.168.0.1:255.255.255.0:mappi001 \0" +# set {char[0x200]}($param + 0x100) = "console=tty1 root=/dev/nfsroot nfsroot=192.168.0.1:/project/m32r-linux/export/root.x nfsaddrs=192.168.0.101:192.168.0.1:192.168.0.1:255.255.255.0:mappi001 \0" +end + +# Boot +define boot + set_kernel_parameters + set $pc=0x08002000 + set *(unsigned char *)0x08001003=0x03 + si + c +end + +# Set breakpoints +define set_breakpoints + b *0x08000030 +end + +## Boot MP +define boot_mp + set_kernel_parameters + set *(unsigned long *)0x00f00000 = boot - 0x80000000 + set *(unsigned long *)0x00eff2f8 = 0x2 + x 0x00eff2f8 + + set $pc=0x08002000 + si + c +end +document boot_mp + Boot BSP +end + +## Boot UP +define boot_up + set_kernel_parameters + set $pc=0x08002000 + si + c +end +document boot_up + Boot BSP +end + +# Restart +define restart + sdireset + sdireset + setup + load_modules + boot_mp +end + +sdireset +sdireset +file vmlinux +target m32rsdi +setup diff --git a/arch/m32r/platforms/mappi/io.c b/arch/m32r/platforms/mappi/io.c new file mode 100644 index 000000000..ac1c396d4 --- /dev/null +++ b/arch/m32r/platforms/mappi/io.c @@ -0,0 +1,325 @@ +/* + * linux/arch/m32r/platforms/mappi/io.c + * + * Typical I/O routines for Mappi board. + * + * Copyright (c) 2001-2005 Hiroyuki Kondo, Hirokazu Takata, + * Hitoshi Yamamoto + */ + +#include <asm/m32r.h> +#include <asm/page.h> +#include <asm/io.h> +#include <asm/byteorder.h> + +#if defined(CONFIG_PCMCIA) && defined(CONFIG_M32R_PCC) +#include <linux/types.h> + +#define M32R_PCC_IOMAP_SIZE 0x1000 + +#define M32R_PCC_IOSTART0 0x1000 +#define M32R_PCC_IOEND0 (M32R_PCC_IOSTART0 + M32R_PCC_IOMAP_SIZE - 1) +#define M32R_PCC_IOSTART1 0x2000 +#define M32R_PCC_IOEND1 (M32R_PCC_IOSTART1 + M32R_PCC_IOMAP_SIZE - 1) + +extern void pcc_ioread(int, unsigned long, void *, size_t, size_t, int); +extern void pcc_iowrite(int, unsigned long, void *, size_t, size_t, int); +#endif /* CONFIG_PCMCIA && CONFIG_M32R_PCC */ + +#define PORT2ADDR(port) _port2addr(port) + +static inline void *_port2addr(unsigned long port) +{ + return (void *)(port | NONCACHE_OFFSET); +} + +static inline void *_port2addr_ne(unsigned long port) +{ + return (void *)((port<<1) + NONCACHE_OFFSET + 0x0C000000); +} + +static inline void delay(void) +{ + __asm__ __volatile__ ("push r0; \n\t pop r0;" : : :"memory"); +} + +/* + * NIC I/O function + */ + +#define PORT2ADDR_NE(port) _port2addr_ne(port) + +static inline unsigned char _ne_inb(void *portp) +{ + return (unsigned char) *(volatile unsigned short *)portp; +} + +static inline unsigned short _ne_inw(void *portp) +{ + unsigned short tmp; + + tmp = *(volatile unsigned short *)portp; + return le16_to_cpu(tmp); +} + +static inline void _ne_outb(unsigned char b, void *portp) +{ + *(volatile unsigned short *)portp = (unsigned short)b; +} + +static inline void _ne_outw(unsigned short w, void *portp) +{ + *(volatile unsigned short *)portp = cpu_to_le16(w); +} + +unsigned char _inb(unsigned long port) +{ + if (port >= 0x300 && port < 0x320) + return _ne_inb(PORT2ADDR_NE(port)); + else +#if defined(CONFIG_PCMCIA) && defined(CONFIG_M32R_PCC) + if (port >= M32R_PCC_IOSTART0 && port <= M32R_PCC_IOEND0) { + unsigned char b; + pcc_ioread(0, port, &b, sizeof(b), 1, 0); + return b; + } else if (port >= M32R_PCC_IOSTART1 && port <= M32R_PCC_IOEND1) { + unsigned char b; + pcc_ioread(1, port, &b, sizeof(b), 1, 0); + return b; + } else +#endif + + return *(volatile unsigned char *)PORT2ADDR(port); +} + +unsigned short _inw(unsigned long port) +{ + if (port >= 0x300 && port < 0x320) + return _ne_inw(PORT2ADDR_NE(port)); + else +#if defined(CONFIG_PCMCIA) && defined(CONFIG_M32R_PCC) + if (port >= M32R_PCC_IOSTART0 && port <= M32R_PCC_IOEND0) { + unsigned short w; + pcc_ioread(0, port, &w, sizeof(w), 1, 0); + return w; + } else if (port >= M32R_PCC_IOSTART1 && port <= M32R_PCC_IOEND1) { + unsigned short w; + pcc_ioread(1, port, &w, sizeof(w), 1, 0); + return w; + } else +#endif + return *(volatile unsigned short *)PORT2ADDR(port); +} + +unsigned long _inl(unsigned long port) +{ +#if defined(CONFIG_PCMCIA) && defined(CONFIG_M32R_PCC) + if (port >= M32R_PCC_IOSTART0 && port <= M32R_PCC_IOEND0) { + unsigned long l; + pcc_ioread(0, port, &l, sizeof(l), 1, 0); + return l; + } else if (port >= M32R_PCC_IOSTART1 && port <= M32R_PCC_IOEND1) { + unsigned short l; + pcc_ioread(1, port, &l, sizeof(l), 1, 0); + return l; + } else +#endif + return *(volatile unsigned long *)PORT2ADDR(port); +} + +unsigned char _inb_p(unsigned long port) +{ + unsigned char v = _inb(port); + delay(); + return (v); +} + +unsigned short _inw_p(unsigned long port) +{ + unsigned short v = _inw(port); + delay(); + return (v); +} + +unsigned long _inl_p(unsigned long port) +{ + unsigned long v = _inl(port); + delay(); + return (v); +} + +void _outb(unsigned char b, unsigned long port) +{ + if (port >= 0x300 && port < 0x320) + _ne_outb(b, PORT2ADDR_NE(port)); + else +#if defined(CONFIG_PCMCIA) && defined(CONFIG_M32R_PCC) + if (port >= M32R_PCC_IOSTART0 && port <= M32R_PCC_IOEND0) { + pcc_iowrite(0, port, &b, sizeof(b), 1, 0); + } else if (port >= M32R_PCC_IOSTART1 && port <= M32R_PCC_IOEND1) { + pcc_iowrite(1, port, &b, sizeof(b), 1, 0); + } else +#endif + *(volatile unsigned char *)PORT2ADDR(port) = b; +} + +void _outw(unsigned short w, unsigned long port) +{ + if (port >= 0x300 && port < 0x320) + _ne_outw(w, PORT2ADDR_NE(port)); + else +#if defined(CONFIG_PCMCIA) && defined(CONFIG_M32R_PCC) + if (port >= M32R_PCC_IOSTART0 && port <= M32R_PCC_IOEND0) { + pcc_iowrite(0, port, &w, sizeof(w), 1, 0); + } else if (port >= M32R_PCC_IOSTART1 && port <= M32R_PCC_IOEND1) { + pcc_iowrite(1, port, &w, sizeof(w), 1, 0); + } else +#endif + *(volatile unsigned short *)PORT2ADDR(port) = w; +} + +void _outl(unsigned long l, unsigned long port) +{ +#if defined(CONFIG_PCMCIA) && defined(CONFIG_M32R_PCC) + if (port >= M32R_PCC_IOSTART0 && port <= M32R_PCC_IOEND0) { + pcc_iowrite(0, port, &l, sizeof(l), 1, 0); + } else if (port >= M32R_PCC_IOSTART1 && port <= M32R_PCC_IOEND1) { + pcc_iowrite(1, port, &l, sizeof(l), 1, 0); + } else +#endif + *(volatile unsigned long *)PORT2ADDR(port) = l; +} + +void _outb_p(unsigned char b, unsigned long port) +{ + _outb(b, port); + delay(); +} + +void _outw_p(unsigned short w, unsigned long port) +{ + _outw(w, port); + delay(); +} + +void _outl_p(unsigned long l, unsigned long port) +{ + _outl(l, port); + delay(); +} + +void _insb(unsigned int port, void *addr, unsigned long count) +{ + unsigned short *buf = addr; + unsigned short *portp; + + if (port >= 0x300 && port < 0x320){ + portp = PORT2ADDR_NE(port); + while (count--) + *buf++ = *(volatile unsigned char *)portp; +#if defined(CONFIG_PCMCIA) && defined(CONFIG_M32R_PCC) + } else if (port >= M32R_PCC_IOSTART0 && port <= M32R_PCC_IOEND0) { + pcc_ioread(0, port, (void *)addr, sizeof(unsigned char), + count, 1); + } else if (port >= M32R_PCC_IOSTART1 && port <= M32R_PCC_IOEND1) { + pcc_ioread(1, port, (void *)addr, sizeof(unsigned char), + count, 1); +#endif + } else { + portp = PORT2ADDR(port); + while (count--) + *buf++ = *(volatile unsigned char *)portp; + } +} + +void _insw(unsigned int port, void *addr, unsigned long count) +{ + unsigned short *buf = addr; + unsigned short *portp; + + if (port >= 0x300 && port < 0x320) { + portp = PORT2ADDR_NE(port); + while (count--) + *buf++ = _ne_inw(portp); +#if defined(CONFIG_PCMCIA) && defined(CONFIG_M32R_PCC) + } else if (port >= M32R_PCC_IOSTART0 && port <= M32R_PCC_IOEND0) { + pcc_ioread(0, port, (void *)addr, sizeof(unsigned short), + count, 1); + } else if (port >= M32R_PCC_IOSTART1 && port <= M32R_PCC_IOEND1) { + pcc_ioread(1, port, (void *)addr, sizeof(unsigned short), + count, 1); +#endif + } else { + portp = PORT2ADDR(port); + while (count--) + *buf++ = *(volatile unsigned short *)portp; + } +} + +void _insl(unsigned int port, void *addr, unsigned long count) +{ + unsigned long *buf = addr; + unsigned long *portp; + + portp = PORT2ADDR(port); + while (count--) + *buf++ = *(volatile unsigned long *)portp; +} + +void _outsb(unsigned int port, const void *addr, unsigned long count) +{ + const unsigned char *buf = addr; + unsigned char *portp; + + if (port >= 0x300 && port < 0x320) { + portp = PORT2ADDR_NE(port); + while (count--) + _ne_outb(*buf++, portp); +#if defined(CONFIG_PCMCIA) && defined(CONFIG_M32R_PCC) + } else if (port >= M32R_PCC_IOSTART0 && port <= M32R_PCC_IOEND0) { + pcc_iowrite(0, port, (void *)addr, sizeof(unsigned char), + count, 1); + } else if (port >= M32R_PCC_IOSTART1 && port <= M32R_PCC_IOEND1) { + pcc_iowrite(1, port, (void *)addr, sizeof(unsigned char), + count, 1); +#endif + } else { + portp = PORT2ADDR(port); + while (count--) + *(volatile unsigned char *)portp = *buf++; + } +} + +void _outsw(unsigned int port, const void *addr, unsigned long count) +{ + const unsigned short *buf = addr; + unsigned short *portp; + + if (port >= 0x300 && port < 0x320) { + portp = PORT2ADDR_NE(port); + while (count--) + _ne_outw(*buf++, portp); +#if defined(CONFIG_PCMCIA) && defined(CONFIG_M32R_PCC) + } else if (port >= M32R_PCC_IOSTART0 && port <= M32R_PCC_IOEND0) { + pcc_iowrite(0, port, (void *)addr, sizeof(unsigned short), + count, 1); + } else if (port >= M32R_PCC_IOSTART1 && port <= M32R_PCC_IOEND1) { + pcc_iowrite(1, port, (void *)addr, sizeof(unsigned short), + count, 1); +#endif + } else { + portp = PORT2ADDR(port); + while (count--) + *(volatile unsigned short *)portp = *buf++; + } +} + +void _outsl(unsigned int port, const void *addr, unsigned long count) +{ + const unsigned long *buf = addr; + unsigned char *portp; + + portp = PORT2ADDR(port); + while (count--) + *(volatile unsigned long *)portp = *buf++; +} diff --git a/arch/m32r/platforms/mappi/setup.c b/arch/m32r/platforms/mappi/setup.c new file mode 100644 index 000000000..767d2f4d6 --- /dev/null +++ b/arch/m32r/platforms/mappi/setup.c @@ -0,0 +1,174 @@ +/* + * linux/arch/m32r/platforms/mappi/setup.c + * + * Setup routines for Renesas MAPPI Board + * + * Copyright (c) 2001-2005 Hiroyuki Kondo, Hirokazu Takata, + * Hitoshi Yamamoto + */ + +#include <linux/irq.h> +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/platform_device.h> + +#include <asm/m32r.h> +#include <asm/io.h> + +#define irq2port(x) (M32R_ICU_CR1_PORTL + ((x - 1) * sizeof(unsigned long))) + +icu_data_t icu_data[NR_IRQS]; + +static void disable_mappi_irq(unsigned int irq) +{ + unsigned long port, data; + + port = irq2port(irq); + data = icu_data[irq].icucr|M32R_ICUCR_ILEVEL7; + outl(data, port); +} + +static void enable_mappi_irq(unsigned int irq) +{ + unsigned long port, data; + + port = irq2port(irq); + data = icu_data[irq].icucr|M32R_ICUCR_IEN|M32R_ICUCR_ILEVEL6; + outl(data, port); +} + +static void mask_mappi(struct irq_data *data) +{ + disable_mappi_irq(data->irq); +} + +static void unmask_mappi(struct irq_data *data) +{ + enable_mappi_irq(data->irq); +} + +static void shutdown_mappi(struct irq_data *data) +{ + unsigned long port; + + port = irq2port(data->irq); + outl(M32R_ICUCR_ILEVEL7, port); +} + +static struct irq_chip mappi_irq_type = +{ + .name = "MAPPI-IRQ", + .irq_shutdown = shutdown_mappi, + .irq_mask = mask_mappi, + .irq_unmask = unmask_mappi, +}; + +void __init init_IRQ(void) +{ + static int once = 0; + + if (once) + return; + else + once++; + +#ifdef CONFIG_NE2000 + /* INT0 : LAN controller (RTL8019AS) */ + irq_set_chip_and_handler(M32R_IRQ_INT0, &mappi_irq_type, + handle_level_irq); + icu_data[M32R_IRQ_INT0].icucr = M32R_ICUCR_IEN|M32R_ICUCR_ISMOD11; + disable_mappi_irq(M32R_IRQ_INT0); +#endif /* CONFIG_M32R_NE2000 */ + + /* MFT2 : system timer */ + irq_set_chip_and_handler(M32R_IRQ_MFT2, &mappi_irq_type, + handle_level_irq); + icu_data[M32R_IRQ_MFT2].icucr = M32R_ICUCR_IEN; + disable_mappi_irq(M32R_IRQ_MFT2); + +#ifdef CONFIG_SERIAL_M32R_SIO + /* SIO0_R : uart receive data */ + irq_set_chip_and_handler(M32R_IRQ_SIO0_R, &mappi_irq_type, + handle_level_irq); + icu_data[M32R_IRQ_SIO0_R].icucr = 0; + disable_mappi_irq(M32R_IRQ_SIO0_R); + + /* SIO0_S : uart send data */ + irq_set_chip_and_handler(M32R_IRQ_SIO0_S, &mappi_irq_type, + handle_level_irq); + icu_data[M32R_IRQ_SIO0_S].icucr = 0; + disable_mappi_irq(M32R_IRQ_SIO0_S); + + /* SIO1_R : uart receive data */ + irq_set_chip_and_handler(M32R_IRQ_SIO1_R, &mappi_irq_type, + handle_level_irq); + icu_data[M32R_IRQ_SIO1_R].icucr = 0; + disable_mappi_irq(M32R_IRQ_SIO1_R); + + /* SIO1_S : uart send data */ + irq_set_chip_and_handler(M32R_IRQ_SIO1_S, &mappi_irq_type, + handle_level_irq); + icu_data[M32R_IRQ_SIO1_S].icucr = 0; + disable_mappi_irq(M32R_IRQ_SIO1_S); +#endif /* CONFIG_SERIAL_M32R_SIO */ + +#if defined(CONFIG_M32R_PCC) + /* INT1 : pccard0 interrupt */ + irq_set_chip_and_handler(M32R_IRQ_INT1, &mappi_irq_type, + handle_level_irq); + icu_data[M32R_IRQ_INT1].icucr = M32R_ICUCR_IEN | M32R_ICUCR_ISMOD00; + disable_mappi_irq(M32R_IRQ_INT1); + + /* INT2 : pccard1 interrupt */ + irq_set_chip_and_handler(M32R_IRQ_INT2, &mappi_irq_type, + handle_level_irq); + icu_data[M32R_IRQ_INT2].icucr = M32R_ICUCR_IEN | M32R_ICUCR_ISMOD00; + disable_mappi_irq(M32R_IRQ_INT2); +#endif /* CONFIG_M32RPCC */ +} + +#if defined(CONFIG_FB_S1D13XXX) + +#include <video/s1d13xxxfb.h> +#include <asm/s1d13806.h> + +static struct s1d13xxxfb_pdata s1d13xxxfb_data = { + .initregs = s1d13xxxfb_initregs, + .initregssize = ARRAY_SIZE(s1d13xxxfb_initregs), + .platform_init_video = NULL, +#ifdef CONFIG_PM + .platform_suspend_video = NULL, + .platform_resume_video = NULL, +#endif +}; + +static struct resource s1d13xxxfb_resources[] = { + [0] = { + .start = 0x10200000UL, + .end = 0x1033FFFFUL, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = 0x10000000UL, + .end = 0x100001FFUL, + .flags = IORESOURCE_MEM, + } +}; + +static struct platform_device s1d13xxxfb_device = { + .name = S1D_DEVICENAME, + .id = 0, + .dev = { + .platform_data = &s1d13xxxfb_data, + }, + .num_resources = ARRAY_SIZE(s1d13xxxfb_resources), + .resource = s1d13xxxfb_resources, +}; + +static int __init platform_init(void) +{ + platform_device_register(&s1d13xxxfb_device); + return 0; +} +arch_initcall(platform_init); +#endif diff --git a/arch/m32r/platforms/mappi2/Makefile b/arch/m32r/platforms/mappi2/Makefile new file mode 100644 index 000000000..0de59084f --- /dev/null +++ b/arch/m32r/platforms/mappi2/Makefile @@ -0,0 +1 @@ +obj-y := setup.o io.o diff --git a/arch/m32r/platforms/mappi2/dot.gdbinit.vdec2 b/arch/m32r/platforms/mappi2/dot.gdbinit.vdec2 new file mode 100644 index 000000000..797a830bd --- /dev/null +++ b/arch/m32r/platforms/mappi2/dot.gdbinit.vdec2 @@ -0,0 +1,233 @@ +# .gdbinit file +# $Id: dot.gdbinit.vdec2,v 1.2 2004/11/11 02:03:15 takata Exp $ + +# setting +set width 0d70 +set radix 0d16 +use_debug_dma + +# Initialize SDRAM controller for Mappi +define sdram_init + # SDIR0 + set *(unsigned long *)0x00ef6008=0x00000182 + # SDIR1 + set *(unsigned long *)0x00ef600c=0x00000001 + # Initialize wait + shell sleep 1 + # Ch0-MOD + set *(unsigned long *)0x00ef602c=0x00000020 + # Ch0-TR + set *(unsigned long *)0x00ef6028=0x00041302 + # Ch0-ADR + set *(unsigned long *)0x00ef6020=0x08000004 + # AutoRef On + set *(unsigned long *)0x00ef6004=0x00010705 + # Access enable + set *(unsigned long *)0x00ef6024=0x00000001 +end +document sdram_init + Mappi SDRAM controller initialization + 0x08000000 - 0x0bffffff (64MB) +end + +# Initialize SDRAM controller for Mappi +define sdram_init2 + # SDIR0 + set *(unsigned long *)0x00ef6008=0x00000182 + # Ch0-MOD + set *(unsigned long *)0x00ef602c=0x00000020 + # Ch0-TR + set *(unsigned long *)0x00ef6028=0x00010002 + # Ch0-ADR + set *(unsigned long *)0x00ef6020=0x08000004 + # AutoRef On + set *(unsigned long *)0x00ef6004=0x00010107 + # SDIR1 + set *(unsigned long *)0x00ef600c=0x00000001 + # Initialize wait + shell sleep 1 + # Access enable + set *(unsigned long *)0x00ef6024=0x00000001 + shell sleep 1 +end +document sdram_init + Mappi SDRAM controller initialization + 0x08000000 - 0x0bffffff (64MB) +end + +# Initialize LAN controller for Mappi +define lanc_init + # Set BSEL1 (BSEL3 for the Chaos's bselc) + #set *(unsigned long *)0x00ef5004 = 0x0fff330f + #set *(unsigned long *)0x00ef5004 = 0x01113301 + +# set *(unsigned long *)0x00ef5004 = 0x02011101 +# set *(unsigned long *)0x00ef5004 = 0x04441104 + + # BSEL5 +# set *(unsigned long *)0x00ef5014 = 0x0ccc310c +# set *(unsigned long *)0x00ef5014 = 0x0303310f +# set *(unsigned long *)0x00ef5014 = 0x01011102 -> NG +# set *(unsigned long *)0x00ef5014 = 0x03033103 + + set *(unsigned long *)0x00ef500c = 0x0b0b1304 + set *(unsigned long *)0x00ef5010 = 0x03033302 +# set *(unsigned long *)0x00ef5018 = 0x02223302 +end + +# MMU enable +define mmu_enable + set $evb=0x88000000 + set *(unsigned long *)0xffff0024=1 +end + +# MMU disable +define mmu_disable + set $evb=0 + set *(unsigned long *)0xffff0024=0 +end + +# Show TLB entries +define show_tlb_entries + set $i = 0 + set $addr = $arg0 + while ($i < 0d16 ) + set $tlb_tag = *(unsigned long*)$addr + set $tlb_data = *(unsigned long*)($addr + 4) + printf " [%2d] 0x%08lx : 0x%08lx - 0x%08lx\n", $i, $addr, $tlb_tag, $tlb_data + set $i = $i + 1 + set $addr = $addr + 8 + end +end +define itlb + set $itlb=0xfe000000 + show_tlb_entries $itlb +end +define dtlb + set $dtlb=0xfe000800 + show_tlb_entries $dtlb +end + +# Cache ON +define set_cache_type + set $mctype = (void*)0xfffffff8 +# chaos +# set *(unsigned long *)($mctype) = 0x0000c000 +# m32102 i-cache only + set *(unsigned long *)($mctype) = 0x00008000 +# m32102 d-cache only +# set *(unsigned long *)($mctype) = 0x00004000 +end +define cache_on + set $param = (void*)0x08001000 + set *(unsigned long *)($param) = 0x60ff6102 +end + + +# Show current task structure +define show_current + set $current = $spi & 0xffffe000 + printf "$current=0x%08lX\n",$current + print *(struct task_struct *)$current +end + +# Show user assigned task structure +define show_task + set $task = $arg0 & 0xffffe000 + printf "$task=0x%08lX\n",$task + print *(struct task_struct *)$task +end +document show_task + Show user assigned task structure + arg0 : task structure address +end + +# Show M32R registers +define show_regs + printf " R0[0x%08lX] R1[0x%08lX] R2[0x%08lX] R3[0x%08lX]\n",$r0,$r1,$r2,$r3 + printf " R4[0x%08lX] R5[0x%08lX] R6[0x%08lX] R7[0x%08lX]\n",$r4,$r5,$r6,$r7 + printf " R8[0x%08lX] R9[0x%08lX] R10[0x%08lX] R11[0x%08lX]\n",$r8,$r9,$r10,$r11 + printf "R12[0x%08lX] FP[0x%08lX] LR[0x%08lX] SP[0x%08lX]\n",$r12,$fp,$lr,$sp + printf "PSW[0x%08lX] CBR[0x%08lX] SPI[0x%08lX] SPU[0x%08lX]\n",$psw,$cbr,$spi,$spu + printf "BPC[0x%08lX] PC[0x%08lX] ACCL[0x%08lX] ACCH[0x%08lX]\n",$bpc,$pc,$accl,$acch + printf "EVB[0x%08lX]\n",$evb + + set $mests = *(unsigned long *)0xffff000c + set $mdeva = *(unsigned long *)0xffff0010 + printf "MESTS[0x%08lX] MDEVA[0x%08lX]\n",$mests,$mdeva +end + + +# Setup all +define setup + sdram_init +# lanc_init +# dispc_init +# set $evb=0x08000000 +end + +# Load modules +define load_modules + use_debug_dma + load +# load busybox.mot +end + +# Set kernel parameters +define set_kernel_parameters + set $param = (void*)0x08001000 + + ## MOUNT_ROOT_RDONLY + set {long}($param+0x00)=0 + ## RAMDISK_FLAGS + #set {long}($param+0x04)=0 + ## ORIG_ROOT_DEV + #set {long}($param+0x08)=0x00000100 + ## LOADER_TYPE + #set {long}($param+0x0C)=0 + ## INITRD_START + set {long}($param+0x10)=0x082a0000 + ## INITRD_SIZE + set {long}($param+0x14)=0d6200000 + + # M32R_CPUCLK + set *(unsigned long *)($param + 0x0018) = 0d25000000 + # M32R_BUSCLK + set *(unsigned long *)($param + 0x001c) = 0d25000000 + # M32R_TIMER_DIVIDE + set *(unsigned long *)($param + 0x0020) = 0d128 + + + set {char[0x200]}($param + 0x100) = "console=ttyS0,115200n8x root=/dev/nfsroot nfsroot=192.168.0.1:/project/m32r-linux/export/root.2.6 nfsaddrs=192.168.0.102:192.168.0.1:192.168.0.1:255.255.255.0:mappi: \0" + + +end + +# Boot +define boot + set_kernel_parameters + debug_chaos + set $pc=0x08002000 + set $fp=0 + del b + si +end + +# Restart +define restart + sdireset + sdireset + setup + load_modules + boot +end + +sdireset +sdireset +file vmlinux +target m32rsdi + +restart +boot + + diff --git a/arch/m32r/platforms/mappi2/io.c b/arch/m32r/platforms/mappi2/io.c new file mode 100644 index 000000000..da58960b3 --- /dev/null +++ b/arch/m32r/platforms/mappi2/io.c @@ -0,0 +1,383 @@ +/* + * linux/arch/m32r/platforms/mappi2/io.c + * + * Typical I/O routines for Mappi2 board. + * + * Copyright (c) 2001-2005 Hiroyuki Kondo, Hirokazu Takata, + * Hitoshi Yamamoto, Mamoru Sakugawa + */ + +#include <asm/m32r.h> +#include <asm/page.h> +#include <asm/io.h> +#include <asm/byteorder.h> + +#if defined(CONFIG_PCMCIA) && defined(CONFIG_M32R_CFC) +#include <linux/types.h> + +#define M32R_PCC_IOMAP_SIZE 0x1000 + +#define M32R_PCC_IOSTART0 0x1000 +#define M32R_PCC_IOEND0 (M32R_PCC_IOSTART0 + M32R_PCC_IOMAP_SIZE - 1) + +extern void pcc_ioread_byte(int, unsigned long, void *, size_t, size_t, int); +extern void pcc_ioread_word(int, unsigned long, void *, size_t, size_t, int); +extern void pcc_iowrite_byte(int, unsigned long, void *, size_t, size_t, int); +extern void pcc_iowrite_word(int, unsigned long, void *, size_t, size_t, int); +#endif /* CONFIG_PCMCIA && CONFIG_M32R_CFC */ + +#define PORT2ADDR(port) _port2addr(port) +#define PORT2ADDR_NE(port) _port2addr_ne(port) +#define PORT2ADDR_USB(port) _port2addr_usb(port) + +static inline void *_port2addr(unsigned long port) +{ + return (void *)(port | NONCACHE_OFFSET); +} + +#if defined(CONFIG_IDE) && !defined(CONFIG_M32R_CFC) +static inline void *__port2addr_ata(unsigned long port) +{ + static int dummy_reg; + + switch (port) { + case 0x1f0: return (void *)(0x0c002000 | NONCACHE_OFFSET); + case 0x1f1: return (void *)(0x0c012800 | NONCACHE_OFFSET); + case 0x1f2: return (void *)(0x0c012002 | NONCACHE_OFFSET); + case 0x1f3: return (void *)(0x0c012802 | NONCACHE_OFFSET); + case 0x1f4: return (void *)(0x0c012004 | NONCACHE_OFFSET); + case 0x1f5: return (void *)(0x0c012804 | NONCACHE_OFFSET); + case 0x1f6: return (void *)(0x0c012006 | NONCACHE_OFFSET); + case 0x1f7: return (void *)(0x0c012806 | NONCACHE_OFFSET); + case 0x3f6: return (void *)(0x0c01200e | NONCACHE_OFFSET); + default: return (void *)&dummy_reg; + } +} +#endif + +#define LAN_IOSTART (0x300 | NONCACHE_OFFSET) +#define LAN_IOEND (0x320 | NONCACHE_OFFSET) +#ifdef CONFIG_CHIP_OPSP +static inline void *_port2addr_ne(unsigned long port) +{ + return (void *)(port + 0x10000000); +} +#else +static inline void *_port2addr_ne(unsigned long port) +{ + return (void *)(port + 0x04000000); +} +#endif +static inline void *_port2addr_usb(unsigned long port) +{ + return (void *)(port + NONCACHE_OFFSET + 0x14000000); +} +static inline void delay(void) +{ + __asm__ __volatile__ ("push r0; \n\t pop r0;" : : :"memory"); +} + +/* + * NIC I/O function + */ + +static inline unsigned char _ne_inb(void *portp) +{ + return (unsigned char) *(volatile unsigned char *)portp; +} + +static inline unsigned short _ne_inw(void *portp) +{ + return (unsigned short)le16_to_cpu(*(volatile unsigned short *)portp); +} + +static inline void _ne_insb(void *portp, void * addr, unsigned long count) +{ + unsigned char *buf = addr; + + while (count--) + *buf++ = *(volatile unsigned char *)portp; +} + +static inline void _ne_outb(unsigned char b, void *portp) +{ + *(volatile unsigned char *)portp = (unsigned char)b; +} + +static inline void _ne_outw(unsigned short w, void *portp) +{ + *(volatile unsigned short *)portp = cpu_to_le16(w); +} + +unsigned char _inb(unsigned long port) +{ + if (port >= LAN_IOSTART && port < LAN_IOEND) + return _ne_inb(PORT2ADDR_NE(port)); +#if defined(CONFIG_IDE) && !defined(CONFIG_M32R_CFC) + else if ((port >= 0x1f0 && port <=0x1f7) || port == 0x3f6) { + return *(volatile unsigned char *)__port2addr_ata(port); + } +#endif +#if defined(CONFIG_PCMCIA) && defined(CONFIG_M32R_CFC) + else if (port >= M32R_PCC_IOSTART0 && port <= M32R_PCC_IOEND0) { + unsigned char b; + pcc_ioread_byte(0, port, &b, sizeof(b), 1, 0); + return b; + } else +#endif + + return *(volatile unsigned char *)PORT2ADDR(port); +} + +unsigned short _inw(unsigned long port) +{ + if (port >= LAN_IOSTART && port < LAN_IOEND) + return _ne_inw(PORT2ADDR_NE(port)); +#if defined(CONFIG_IDE) && !defined(CONFIG_M32R_CFC) + else if ((port >= 0x1f0 && port <=0x1f7) || port == 0x3f6) { + return *(volatile unsigned short *)__port2addr_ata(port); + } +#endif +#if defined(CONFIG_USB) + else if (port >= 0x340 && port < 0x3a0) + return *(volatile unsigned short *)PORT2ADDR_USB(port); +#endif + +#if defined(CONFIG_PCMCIA) && defined(CONFIG_M32R_CFC) + else if (port >= M32R_PCC_IOSTART0 && port <= M32R_PCC_IOEND0) { + unsigned short w; + pcc_ioread_word(0, port, &w, sizeof(w), 1, 0); + return w; + } else +#endif + return *(volatile unsigned short *)PORT2ADDR(port); +} + +unsigned long _inl(unsigned long port) +{ +#if defined(CONFIG_PCMCIA) && defined(CONFIG_M32R_CFC) + if (port >= M32R_PCC_IOSTART0 && port <= M32R_PCC_IOEND0) { + unsigned long l; + pcc_ioread_word(0, port, &l, sizeof(l), 1, 0); + return l; + } else +#endif + return *(volatile unsigned long *)PORT2ADDR(port); +} + +unsigned char _inb_p(unsigned long port) +{ + unsigned char v = _inb(port); + delay(); + return (v); +} + +unsigned short _inw_p(unsigned long port) +{ + unsigned short v = _inw(port); + delay(); + return (v); +} + +unsigned long _inl_p(unsigned long port) +{ + unsigned long v = _inl(port); + delay(); + return (v); +} + +void _outb(unsigned char b, unsigned long port) +{ + if (port >= LAN_IOSTART && port < LAN_IOEND) + _ne_outb(b, PORT2ADDR_NE(port)); + else +#if defined(CONFIG_IDE) && !defined(CONFIG_M32R_CFC) + if ((port >= 0x1f0 && port <=0x1f7) || port == 0x3f6) { + *(volatile unsigned char *)__port2addr_ata(port) = b; + } else +#endif +#if defined(CONFIG_PCMCIA) && defined(CONFIG_M32R_CFC) + if (port >= M32R_PCC_IOSTART0 && port <= M32R_PCC_IOEND0) { + pcc_iowrite_byte(0, port, &b, sizeof(b), 1, 0); + } else +#endif + *(volatile unsigned char *)PORT2ADDR(port) = b; +} + +void _outw(unsigned short w, unsigned long port) +{ + if (port >= LAN_IOSTART && port < LAN_IOEND) + _ne_outw(w, PORT2ADDR_NE(port)); + else +#if defined(CONFIG_IDE) && !defined(CONFIG_M32R_CFC) + if ((port >= 0x1f0 && port <=0x1f7) || port == 0x3f6) { + *(volatile unsigned short *)__port2addr_ata(port) = w; + } else +#endif +#if defined(CONFIG_USB) + if (port >= 0x340 && port < 0x3a0) + *(volatile unsigned short *)PORT2ADDR_USB(port) = w; + else +#endif +#if defined(CONFIG_PCMCIA) && defined(CONFIG_M32R_CFC) + if (port >= M32R_PCC_IOSTART0 && port <= M32R_PCC_IOEND0) { + pcc_iowrite_word(0, port, &w, sizeof(w), 1, 0); + } else +#endif + *(volatile unsigned short *)PORT2ADDR(port) = w; +} + +void _outl(unsigned long l, unsigned long port) +{ +#if defined(CONFIG_PCMCIA) && defined(CONFIG_M32R_CFC) + if (port >= M32R_PCC_IOSTART0 && port <= M32R_PCC_IOEND0) { + pcc_iowrite_word(0, port, &l, sizeof(l), 1, 0); + } else +#endif + *(volatile unsigned long *)PORT2ADDR(port) = l; +} + +void _outb_p(unsigned char b, unsigned long port) +{ + _outb(b, port); + delay(); +} + +void _outw_p(unsigned short w, unsigned long port) +{ + _outw(w, port); + delay(); +} + +void _outl_p(unsigned long l, unsigned long port) +{ + _outl(l, port); + delay(); +} + +void _insb(unsigned int port, void * addr, unsigned long count) +{ + if (port >= LAN_IOSTART && port < LAN_IOEND) + _ne_insb(PORT2ADDR_NE(port), addr, count); +#if defined(CONFIG_IDE) && !defined(CONFIG_M32R_CFC) + else if ((port >= 0x1f0 && port <=0x1f7) || port == 0x3f6) { + unsigned char *buf = addr; + unsigned char *portp = __port2addr_ata(port); + while (count--) + *buf++ = *(volatile unsigned char *)portp; + } +#endif +#if defined(CONFIG_PCMCIA) && defined(CONFIG_M32R_CFC) + else if (port >= M32R_PCC_IOSTART0 && port <= M32R_PCC_IOEND0) { + pcc_ioread_byte(0, port, (void *)addr, sizeof(unsigned char), + count, 1); + } +#endif + else { + unsigned char *buf = addr; + unsigned char *portp = PORT2ADDR(port); + while (count--) + *buf++ = *(volatile unsigned char *)portp; + } +} + +void _insw(unsigned int port, void * addr, unsigned long count) +{ + unsigned short *buf = addr; + unsigned short *portp; + + if (port >= LAN_IOSTART && port < LAN_IOEND) { + portp = PORT2ADDR_NE(port); + while (count--) + *buf++ = *(volatile unsigned short *)portp; +#if defined(CONFIG_PCMCIA) && defined(CONFIG_M32R_CFC) + } else if (port >= M32R_PCC_IOSTART0 && port <= M32R_PCC_IOEND0) { + pcc_ioread_word(9, port, (void *)addr, sizeof(unsigned short), + count, 1); +#endif +#if defined(CONFIG_IDE) && !defined(CONFIG_M32R_CFC) + } else if ((port >= 0x1f0 && port <=0x1f7) || port == 0x3f6) { + portp = __port2addr_ata(port); + while (count--) + *buf++ = *(volatile unsigned short *)portp; +#endif + } else { + portp = PORT2ADDR(port); + while (count--) + *buf++ = *(volatile unsigned short *)portp; + } +} + +void _insl(unsigned int port, void * addr, unsigned long count) +{ + unsigned long *buf = addr; + unsigned long *portp; + + portp = PORT2ADDR(port); + while (count--) + *buf++ = *(volatile unsigned long *)portp; +} + +void _outsb(unsigned int port, const void * addr, unsigned long count) +{ + const unsigned char *buf = addr; + unsigned char *portp; + + if (port >= LAN_IOSTART && port < LAN_IOEND) { + portp = PORT2ADDR_NE(port); + while (count--) + _ne_outb(*buf++, portp); +#if defined(CONFIG_IDE) && !defined(CONFIG_M32R_CFC) + } else if ((port >= 0x1f0 && port <=0x1f7) || port == 0x3f6) { + portp = __port2addr_ata(port); + while (count--) + *(volatile unsigned char *)portp = *buf++; +#endif +#if defined(CONFIG_PCMCIA) && defined(CONFIG_M32R_CFC) + } else if (port >= M32R_PCC_IOSTART0 && port <= M32R_PCC_IOEND0) { + pcc_iowrite_byte(0, port, (void *)addr, sizeof(unsigned char), + count, 1); +#endif + } else { + portp = PORT2ADDR(port); + while (count--) + *(volatile unsigned char *)portp = *buf++; + } +} + +void _outsw(unsigned int port, const void * addr, unsigned long count) +{ + const unsigned short *buf = addr; + unsigned short *portp; + + if (port >= LAN_IOSTART && port < LAN_IOEND) { + portp = PORT2ADDR_NE(port); + while (count--) + *(volatile unsigned short *)portp = *buf++; +#if defined(CONFIG_IDE) && !defined(CONFIG_M32R_CFC) + } else if ((port >= 0x1f0 && port <=0x1f7) || port == 0x3f6) { + portp = __port2addr_ata(port); + while (count--) + *(volatile unsigned short *)portp = *buf++; +#endif +#if defined(CONFIG_PCMCIA) && defined(CONFIG_M32R_CFC) + } else if (port >= M32R_PCC_IOSTART0 && port <= M32R_PCC_IOEND0) { + pcc_iowrite_word(9, port, (void *)addr, sizeof(unsigned short), + count, 1); +#endif + } else { + portp = PORT2ADDR(port); + while (count--) + *(volatile unsigned short *)portp = *buf++; + } +} + +void _outsl(unsigned int port, const void * addr, unsigned long count) +{ + const unsigned long *buf = addr; + unsigned char *portp; + + portp = PORT2ADDR(port); + while (count--) + *(volatile unsigned long *)portp = *buf++; +} diff --git a/arch/m32r/platforms/mappi2/setup.c b/arch/m32r/platforms/mappi2/setup.c new file mode 100644 index 000000000..76d665abf --- /dev/null +++ b/arch/m32r/platforms/mappi2/setup.c @@ -0,0 +1,171 @@ +/* + * linux/arch/m32r/platforms/mappi2/setup.c + * + * Setup routines for Renesas MAPPI-II(M3A-ZA36) Board + * + * Copyright (c) 2001-2005 Hiroyuki Kondo, Hirokazu Takata, + * Hitoshi Yamamoto, Mamoru Sakugawa + */ + +#include <linux/irq.h> +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/platform_device.h> + +#include <asm/m32r.h> +#include <asm/io.h> + +#define irq2port(x) (M32R_ICU_CR1_PORTL + ((x - 1) * sizeof(unsigned long))) + +icu_data_t icu_data[NR_IRQS]; + +static void disable_mappi2_irq(unsigned int irq) +{ + unsigned long port, data; + + if ((irq == 0) ||(irq >= NR_IRQS)) { + printk("bad irq 0x%08x\n", irq); + return; + } + port = irq2port(irq); + data = icu_data[irq].icucr|M32R_ICUCR_ILEVEL7; + outl(data, port); +} + +static void enable_mappi2_irq(unsigned int irq) +{ + unsigned long port, data; + + if ((irq == 0) ||(irq >= NR_IRQS)) { + printk("bad irq 0x%08x\n", irq); + return; + } + port = irq2port(irq); + data = icu_data[irq].icucr|M32R_ICUCR_IEN|M32R_ICUCR_ILEVEL6; + outl(data, port); +} + +static void mask_mappi2(struct irq_data *data) +{ + disable_mappi2_irq(data->irq); +} + +static void unmask_mappi2(struct irq_data *data) +{ + enable_mappi2_irq(data->irq); +} + +static void shutdown_mappi2(struct irq_data *data) +{ + unsigned long port; + + port = irq2port(data->irq); + outl(M32R_ICUCR_ILEVEL7, port); +} + +static struct irq_chip mappi2_irq_type = +{ + .name = "MAPPI2-IRQ", + .irq_shutdown = shutdown_mappi2, + .irq_mask = mask_mappi2, + .irq_unmask = unmask_mappi2, +}; + +void __init init_IRQ(void) +{ +#if defined(CONFIG_SMC91X) + /* INT0 : LAN controller (SMC91111) */ + irq_set_chip_and_handler(M32R_IRQ_INT0, &mappi2_irq_type, + handle_level_irq); + icu_data[M32R_IRQ_INT0].icucr = M32R_ICUCR_IEN|M32R_ICUCR_ISMOD10; + disable_mappi2_irq(M32R_IRQ_INT0); +#endif /* CONFIG_SMC91X */ + + /* MFT2 : system timer */ + irq_set_chip_and_handler(M32R_IRQ_MFT2, &mappi2_irq_type, + handle_level_irq); + icu_data[M32R_IRQ_MFT2].icucr = M32R_ICUCR_IEN; + disable_mappi2_irq(M32R_IRQ_MFT2); + +#ifdef CONFIG_SERIAL_M32R_SIO + /* SIO0_R : uart receive data */ + irq_set_chip_and_handler(M32R_IRQ_SIO0_R, &mappi2_irq_type, + handle_level_irq); + icu_data[M32R_IRQ_SIO0_R].icucr = 0; + disable_mappi2_irq(M32R_IRQ_SIO0_R); + + /* SIO0_S : uart send data */ + irq_set_chip_and_handler(M32R_IRQ_SIO0_S, &mappi2_irq_type, + handle_level_irq); + icu_data[M32R_IRQ_SIO0_S].icucr = 0; + disable_mappi2_irq(M32R_IRQ_SIO0_S); + /* SIO1_R : uart receive data */ + irq_set_chip_and_handler(M32R_IRQ_SIO1_R, &mappi2_irq_type, + handle_level_irq); + icu_data[M32R_IRQ_SIO1_R].icucr = 0; + disable_mappi2_irq(M32R_IRQ_SIO1_R); + + /* SIO1_S : uart send data */ + irq_set_chip_and_handler(M32R_IRQ_SIO1_S, &mappi2_irq_type, + handle_level_irq); + icu_data[M32R_IRQ_SIO1_S].icucr = 0; + disable_mappi2_irq(M32R_IRQ_SIO1_S); +#endif /* CONFIG_M32R_USE_DBG_CONSOLE */ + +#if defined(CONFIG_USB) + /* INT1 : USB Host controller interrupt */ + irq_set_chip_and_handler(M32R_IRQ_INT1, &mappi2_irq_type, + handle_level_irq); + icu_data[M32R_IRQ_INT1].icucr = M32R_ICUCR_ISMOD01; + disable_mappi2_irq(M32R_IRQ_INT1); +#endif /* CONFIG_USB */ + + /* ICUCR40: CFC IREQ */ + irq_set_chip_and_handler(PLD_IRQ_CFIREQ, &mappi2_irq_type, + handle_level_irq); + icu_data[PLD_IRQ_CFIREQ].icucr = M32R_ICUCR_IEN|M32R_ICUCR_ISMOD01; + disable_mappi2_irq(PLD_IRQ_CFIREQ); + +#if defined(CONFIG_M32R_CFC) + /* ICUCR41: CFC Insert */ + irq_set_chip_and_handler(PLD_IRQ_CFC_INSERT, &mappi2_irq_type, + handle_level_irq); + icu_data[PLD_IRQ_CFC_INSERT].icucr = M32R_ICUCR_IEN|M32R_ICUCR_ISMOD00; + disable_mappi2_irq(PLD_IRQ_CFC_INSERT); + + /* ICUCR42: CFC Eject */ + irq_set_chip_and_handler(PLD_IRQ_CFC_EJECT, &mappi2_irq_type, + handle_level_irq); + icu_data[PLD_IRQ_CFC_EJECT].icucr = M32R_ICUCR_IEN|M32R_ICUCR_ISMOD10; + disable_mappi2_irq(PLD_IRQ_CFC_EJECT); +#endif /* CONFIG_MAPPI2_CFC */ +} + +#define LAN_IOSTART 0x300 +#define LAN_IOEND 0x320 +static struct resource smc91x_resources[] = { + [0] = { + .start = (LAN_IOSTART), + .end = (LAN_IOEND), + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = M32R_IRQ_INT0, + .end = M32R_IRQ_INT0, + .flags = IORESOURCE_IRQ, + } +}; + +static struct platform_device smc91x_device = { + .name = "smc91x", + .id = 0, + .num_resources = ARRAY_SIZE(smc91x_resources), + .resource = smc91x_resources, +}; + +static int __init platform_init(void) +{ + platform_device_register(&smc91x_device); + return 0; +} +arch_initcall(platform_init); diff --git a/arch/m32r/platforms/mappi3/Makefile b/arch/m32r/platforms/mappi3/Makefile new file mode 100644 index 000000000..0de59084f --- /dev/null +++ b/arch/m32r/platforms/mappi3/Makefile @@ -0,0 +1 @@ +obj-y := setup.o io.o diff --git a/arch/m32r/platforms/mappi3/dot.gdbinit b/arch/m32r/platforms/mappi3/dot.gdbinit new file mode 100644 index 000000000..89c22184e --- /dev/null +++ b/arch/m32r/platforms/mappi3/dot.gdbinit @@ -0,0 +1,224 @@ +# .gdbinit file +# $Id: dot.gdbinit,v 1.1 2005/04/11 02:21:08 sakugawa Exp $ + +# setting +set width 0d70 +set radix 0d16 +use_debug_dma + +# Initialize SDRAM controller for Mappi +define sdram_init + # SDIR0 + set *(unsigned long *)0x00ef6008 = 0x00000182 + # SDIR1 + set *(unsigned long *)0x00ef600c = 0x00000001 + # Initialize wait + shell sleep 0.1 + # MOD + set *(unsigned long *)0x00ef602c = 0x00000020 + set *(unsigned long *)0x00ef604c = 0x00000020 + # TR + set *(unsigned long *)0x00ef6028 = 0x00051502 + set *(unsigned long *)0x00ef6048 = 0x00051502 + # ADR + set *(unsigned long *)0x00ef6020 = 0x08000004 + set *(unsigned long *)0x00ef6040 = 0x0c000004 + # AutoRef On + set *(unsigned long *)0x00ef6004 = 0x00010517 + # Access enable + set *(unsigned long *)0x00ef6024 = 0x00000001 + set *(unsigned long *)0x00ef6044 = 0x00000001 +end + +# Initialize LAN controller for Mappi +define lanc_init + # Set BSEL4 + #set *(unsigned long *)0x00ef5004 = 0x0fff330f + #set *(unsigned long *)0x00ef5004 = 0x01113301 + +# set *(unsigned long *)0x00ef5004 = 0x02011101 +# set *(unsigned long *)0x00ef5004 = 0x04441104 +end + +define clock_init + set *(unsigned long *)0x00ef4010 = 2 + set *(unsigned long *)0x00ef4014 = 2 + set *(unsigned long *)0x00ef4020 = 3 + set *(unsigned long *)0x00ef4024 = 3 + set *(unsigned long *)0x00ef4004 = 0x7 +# shell sleep 0.1 +# set *(unsigned long *)0x00ef4004 = 0x5 + shell sleep 0.1 + set *(unsigned long *)0x00ef4008 = 0x0200 +end + +define port_init + set $sfrbase = 0x00ef0000 + set *(unsigned short *)0x00ef1060 = 0x5555 + set *(unsigned short *)0x00ef1062 = 0x5555 + set *(unsigned short *)0x00ef1064 = 0x5555 + set *(unsigned short *)0x00ef1066 = 0x5555 + set *(unsigned short *)0x00ef1068 = 0x5555 + set *(unsigned short *)0x00ef106a = 0x0000 + set *(unsigned short *)0x00ef106e = 0x5555 + set *(unsigned short *)0x00ef1070 = 0x5555 +end + +# MMU enable +define mmu_enable + set $evb=0x88000000 + set *(unsigned long *)0xffff0024=1 +end + +# MMU disable +define mmu_disable + set $evb=0 + set *(unsigned long *)0xffff0024=0 +end + +# Show TLB entries +define show_tlb_entries + set $i = 0 + set $addr = $arg0 + while ($i < 0d16 ) + set $tlb_tag = *(unsigned long*)$addr + set $tlb_data = *(unsigned long*)($addr + 4) + printf " [%2d] 0x%08lx : 0x%08lx - 0x%08lx\n", $i, $addr, $tlb_tag, $tlb_data + set $i = $i + 1 + set $addr = $addr + 8 + end +end +define itlb + set $itlb=0xfe000000 + show_tlb_entries $itlb +end +define dtlb + set $dtlb=0xfe000800 + show_tlb_entries $dtlb +end + +# Cache ON +define set_cache_type + set $mctype = (void*)0xfffffff8 +# chaos +# set *(unsigned long *)($mctype) = 0x0000c000 +# m32102 i-cache only + set *(unsigned long *)($mctype) = 0x00008000 +# m32102 d-cache only +# set *(unsigned long *)($mctype) = 0x00004000 +end +define cache_on + set $param = (void*)0x08001000 + set *(unsigned long *)($param) = 0x60ff6102 +end + + +# Show current task structure +define show_current + set $current = $spi & 0xffffe000 + printf "$current=0x%08lX\n",$current + print *(struct task_struct *)$current +end + +# Show user assigned task structure +define show_task + set $task = $arg0 & 0xffffe000 + printf "$task=0x%08lX\n",$task + print *(struct task_struct *)$task +end +document show_task + Show user assigned task structure + arg0 : task structure address +end + +# Show M32R registers +define show_regs + printf " R0[0x%08lX] R1[0x%08lX] R2[0x%08lX] R3[0x%08lX]\n",$r0,$r1,$r2,$r3 + printf " R4[0x%08lX] R5[0x%08lX] R6[0x%08lX] R7[0x%08lX]\n",$r4,$r5,$r6,$r7 + printf " R8[0x%08lX] R9[0x%08lX] R10[0x%08lX] R11[0x%08lX]\n",$r8,$r9,$r10,$r11 + printf "R12[0x%08lX] FP[0x%08lX] LR[0x%08lX] SP[0x%08lX]\n",$r12,$fp,$lr,$sp + printf "PSW[0x%08lX] CBR[0x%08lX] SPI[0x%08lX] SPU[0x%08lX]\n",$psw,$cbr,$spi,$spu + printf "BPC[0x%08lX] PC[0x%08lX] ACCL[0x%08lX] ACCH[0x%08lX]\n",$bpc,$pc,$accl,$acch + printf "EVB[0x%08lX]\n",$evb + + set $mests = *(unsigned long *)0xffff000c + set $mdeva = *(unsigned long *)0xffff0010 + printf "MESTS[0x%08lX] MDEVA[0x%08lX]\n",$mests,$mdeva +end + + +# Setup all +define setup + clock_init + shell sleep 0.1 + port_init + sdram_init +# lanc_init +# dispc_init +# set $evb=0x08000000 +end + +# Load modules +define load_modules + use_debug_dma + load +# load busybox.mot +end + +# Set kernel parameters +define set_kernel_parameters + set $param = (void*)0x08001000 + + ## MOUNT_ROOT_RDONLY + set {long}($param+0x00)=0 + ## RAMDISK_FLAGS + #set {long}($param+0x04)=0 + ## ORIG_ROOT_DEV + #set {long}($param+0x08)=0x00000100 + ## LOADER_TYPE + #set {long}($param+0x0C)=0 + ## INITRD_START + set {long}($param+0x10)=0x082a0000 + ## INITRD_SIZE + set {long}($param+0x14)=0d6200000 + + # M32R_CPUCLK + set *(unsigned long *)($param + 0x0018) = 0d100000000 + # M32R_BUSCLK + set *(unsigned long *)($param + 0x001c) = 0d50000000 + # M32R_TIMER_DIVIDE + set *(unsigned long *)($param + 0x0020) = 0d128 + + + set {char[0x200]}($param + 0x100) = "console=ttyS0,115200n8x root=/dev/nfsroot nfsroot=192.168.0.1:/project/m32r-linux/export/root.2.6_04 nfsaddrs=192.168.0.102:192.168.0.1:192.168.0.1:255.255.255.0:mappi: \0" + + +end + +# Boot +define boot + set_kernel_parameters + debug_chaos + set *(unsigned long *)0x00f00000=0x08002000 + set $pc=0x08002000 + set $fp=0 + del b + si +end + +# Restart +define restart + sdireset + sdireset + setup + load_modules + boot +end + +sdireset +sdireset +file vmlinux +target m32rsdi + +restart +boot diff --git a/arch/m32r/platforms/mappi3/io.c b/arch/m32r/platforms/mappi3/io.c new file mode 100644 index 000000000..1bc3f90fd --- /dev/null +++ b/arch/m32r/platforms/mappi3/io.c @@ -0,0 +1,405 @@ +/* + * linux/arch/m32r/platforms/mappi3/io.c + * + * Typical I/O routines for Mappi3 board. + * + * Copyright (c) 2001-2005 Hiroyuki Kondo, Hirokazu Takata, + * Hitoshi Yamamoto, Mamoru Sakugawa + */ + +#include <asm/m32r.h> +#include <asm/page.h> +#include <asm/io.h> +#include <asm/byteorder.h> + +#if defined(CONFIG_PCMCIA) && defined(CONFIG_M32R_CFC) +#include <linux/types.h> + +#define M32R_PCC_IOMAP_SIZE 0x1000 + +#define M32R_PCC_IOSTART0 0x1000 +#define M32R_PCC_IOEND0 (M32R_PCC_IOSTART0 + M32R_PCC_IOMAP_SIZE - 1) + +extern void pcc_ioread_byte(int, unsigned long, void *, size_t, size_t, int); +extern void pcc_ioread_word(int, unsigned long, void *, size_t, size_t, int); +extern void pcc_iowrite_byte(int, unsigned long, void *, size_t, size_t, int); +extern void pcc_iowrite_word(int, unsigned long, void *, size_t, size_t, int); +#endif /* CONFIG_PCMCIA && CONFIG_M32R_CFC */ + +#define PORT2ADDR(port) _port2addr(port) +#define PORT2ADDR_NE(port) _port2addr_ne(port) +#define PORT2ADDR_USB(port) _port2addr_usb(port) + +static inline void *_port2addr(unsigned long port) +{ + return (void *)(port | NONCACHE_OFFSET); +} + +#if defined(CONFIG_IDE) +static inline void *__port2addr_ata(unsigned long port) +{ + static int dummy_reg; + + switch (port) { + /* IDE0 CF */ + case 0x1f0: return (void *)(0x14002000 | NONCACHE_OFFSET); + case 0x1f1: return (void *)(0x14012800 | NONCACHE_OFFSET); + case 0x1f2: return (void *)(0x14012002 | NONCACHE_OFFSET); + case 0x1f3: return (void *)(0x14012802 | NONCACHE_OFFSET); + case 0x1f4: return (void *)(0x14012004 | NONCACHE_OFFSET); + case 0x1f5: return (void *)(0x14012804 | NONCACHE_OFFSET); + case 0x1f6: return (void *)(0x14012006 | NONCACHE_OFFSET); + case 0x1f7: return (void *)(0x14012806 | NONCACHE_OFFSET); + case 0x3f6: return (void *)(0x1401200e | NONCACHE_OFFSET); + /* IDE1 IDE */ + case 0x170: /* Data 16bit */ + return (void *)(0x14810000 | NONCACHE_OFFSET); + case 0x171: /* Features / Error */ + return (void *)(0x14810002 | NONCACHE_OFFSET); + case 0x172: /* Sector count */ + return (void *)(0x14810004 | NONCACHE_OFFSET); + case 0x173: /* Sector number */ + return (void *)(0x14810006 | NONCACHE_OFFSET); + case 0x174: /* Cylinder low */ + return (void *)(0x14810008 | NONCACHE_OFFSET); + case 0x175: /* Cylinder high */ + return (void *)(0x1481000a | NONCACHE_OFFSET); + case 0x176: /* Device head */ + return (void *)(0x1481000c | NONCACHE_OFFSET); + case 0x177: /* Command */ + return (void *)(0x1481000e | NONCACHE_OFFSET); + case 0x376: /* Device control / Alt status */ + return (void *)(0x1480800c | NONCACHE_OFFSET); + + default: return (void *)&dummy_reg; + } +} +#endif + +#define LAN_IOSTART (0x300 | NONCACHE_OFFSET) +#define LAN_IOEND (0x320 | NONCACHE_OFFSET) +static inline void *_port2addr_ne(unsigned long port) +{ + return (void *)(port + 0x10000000); +} + +static inline void *_port2addr_usb(unsigned long port) +{ + return (void *)(port + NONCACHE_OFFSET + 0x12000000); +} +static inline void delay(void) +{ + __asm__ __volatile__ ("push r0; \n\t pop r0;" : : :"memory"); +} + +/* + * NIC I/O function + */ + +static inline unsigned char _ne_inb(void *portp) +{ + return (unsigned char) *(volatile unsigned char *)portp; +} + +static inline unsigned short _ne_inw(void *portp) +{ + return (unsigned short)le16_to_cpu(*(volatile unsigned short *)portp); +} + +static inline void _ne_insb(void *portp, void * addr, unsigned long count) +{ + unsigned char *buf = addr; + + while (count--) + *buf++ = *(volatile unsigned char *)portp; +} + +static inline void _ne_outb(unsigned char b, void *portp) +{ + *(volatile unsigned char *)portp = (unsigned char)b; +} + +static inline void _ne_outw(unsigned short w, void *portp) +{ + *(volatile unsigned short *)portp = cpu_to_le16(w); +} + +unsigned char _inb(unsigned long port) +{ + if (port >= LAN_IOSTART && port < LAN_IOEND) + return _ne_inb(PORT2ADDR_NE(port)); +#if defined(CONFIG_IDE) + else if ( ((port >= 0x170 && port <=0x177) || port == 0x376) || + ((port >= 0x1f0 && port <=0x1f7) || port == 0x3f6) ){ + return *(volatile unsigned char *)__port2addr_ata(port); + } +#endif +#if defined(CONFIG_PCMCIA) && defined(CONFIG_M32R_CFC) + else if (port >= M32R_PCC_IOSTART0 && port <= M32R_PCC_IOEND0) { + unsigned char b; + pcc_ioread_byte(0, port, &b, sizeof(b), 1, 0); + return b; + } else +#endif + return *(volatile unsigned char *)PORT2ADDR(port); +} + +unsigned short _inw(unsigned long port) +{ + if (port >= LAN_IOSTART && port < LAN_IOEND) + return _ne_inw(PORT2ADDR_NE(port)); +#if defined(CONFIG_IDE) + else if ( ((port >= 0x170 && port <=0x177) || port == 0x376) || + ((port >= 0x1f0 && port <=0x1f7) || port == 0x3f6) ){ + return *(volatile unsigned short *)__port2addr_ata(port); + } +#endif +#if defined(CONFIG_USB) + else if (port >= 0x340 && port < 0x3a0) + return *(volatile unsigned short *)PORT2ADDR_USB(port); +#endif + +#if defined(CONFIG_PCMCIA) && defined(CONFIG_M32R_CFC) + else if (port >= M32R_PCC_IOSTART0 && port <= M32R_PCC_IOEND0) { + unsigned short w; + pcc_ioread_word(0, port, &w, sizeof(w), 1, 0); + return w; + } else +#endif + return *(volatile unsigned short *)PORT2ADDR(port); +} + +unsigned long _inl(unsigned long port) +{ +#if defined(CONFIG_PCMCIA) && defined(CONFIG_M32R_CFC) + if (port >= M32R_PCC_IOSTART0 && port <= M32R_PCC_IOEND0) { + unsigned long l; + pcc_ioread_word(0, port, &l, sizeof(l), 1, 0); + return l; + } else +#endif + return *(volatile unsigned long *)PORT2ADDR(port); +} + +unsigned char _inb_p(unsigned long port) +{ + unsigned char v = _inb(port); + delay(); + return (v); +} + +unsigned short _inw_p(unsigned long port) +{ + unsigned short v = _inw(port); + delay(); + return (v); +} + +unsigned long _inl_p(unsigned long port) +{ + unsigned long v = _inl(port); + delay(); + return (v); +} + +void _outb(unsigned char b, unsigned long port) +{ + if (port >= LAN_IOSTART && port < LAN_IOEND) + _ne_outb(b, PORT2ADDR_NE(port)); + else +#if defined(CONFIG_IDE) + if ( ((port >= 0x170 && port <=0x177) || port == 0x376) || + ((port >= 0x1f0 && port <=0x1f7) || port == 0x3f6) ){ + *(volatile unsigned char *)__port2addr_ata(port) = b; + } else +#endif +#if defined(CONFIG_PCMCIA) && defined(CONFIG_M32R_CFC) + if (port >= M32R_PCC_IOSTART0 && port <= M32R_PCC_IOEND0) { + pcc_iowrite_byte(0, port, &b, sizeof(b), 1, 0); + } else +#endif + *(volatile unsigned char *)PORT2ADDR(port) = b; +} + +void _outw(unsigned short w, unsigned long port) +{ + if (port >= LAN_IOSTART && port < LAN_IOEND) + _ne_outw(w, PORT2ADDR_NE(port)); + else +#if defined(CONFIG_IDE) + if ( ((port >= 0x170 && port <=0x177) || port == 0x376) || + ((port >= 0x1f0 && port <=0x1f7) || port == 0x3f6) ){ + *(volatile unsigned short *)__port2addr_ata(port) = w; + } else +#endif +#if defined(CONFIG_USB) + if (port >= 0x340 && port < 0x3a0) + *(volatile unsigned short *)PORT2ADDR_USB(port) = w; + else +#endif +#if defined(CONFIG_PCMCIA) && defined(CONFIG_M32R_CFC) + if (port >= M32R_PCC_IOSTART0 && port <= M32R_PCC_IOEND0) { + pcc_iowrite_word(0, port, &w, sizeof(w), 1, 0); + } else +#endif + *(volatile unsigned short *)PORT2ADDR(port) = w; +} + +void _outl(unsigned long l, unsigned long port) +{ +#if defined(CONFIG_PCMCIA) && defined(CONFIG_M32R_CFC) + if (port >= M32R_PCC_IOSTART0 && port <= M32R_PCC_IOEND0) { + pcc_iowrite_word(0, port, &l, sizeof(l), 1, 0); + } else +#endif + *(volatile unsigned long *)PORT2ADDR(port) = l; +} + +void _outb_p(unsigned char b, unsigned long port) +{ + _outb(b, port); + delay(); +} + +void _outw_p(unsigned short w, unsigned long port) +{ + _outw(w, port); + delay(); +} + +void _outl_p(unsigned long l, unsigned long port) +{ + _outl(l, port); + delay(); +} + +void _insb(unsigned int port, void * addr, unsigned long count) +{ + if (port >= LAN_IOSTART && port < LAN_IOEND) + _ne_insb(PORT2ADDR_NE(port), addr, count); +#if defined(CONFIG_IDE) + else if ( ((port >= 0x170 && port <=0x177) || port == 0x376) || + ((port >= 0x1f0 && port <=0x1f7) || port == 0x3f6) ){ + unsigned char *buf = addr; + unsigned char *portp = __port2addr_ata(port); + while (count--) + *buf++ = *(volatile unsigned char *)portp; + } +#endif +#if defined(CONFIG_PCMCIA) && defined(CONFIG_M32R_CFC) + else if (port >= M32R_PCC_IOSTART0 && port <= M32R_PCC_IOEND0) { + pcc_ioread_byte(0, port, (void *)addr, sizeof(unsigned char), + count, 1); + } +#endif + else { + unsigned char *buf = addr; + unsigned char *portp = PORT2ADDR(port); + while (count--) + *buf++ = *(volatile unsigned char *)portp; + } +} + +void _insw(unsigned int port, void * addr, unsigned long count) +{ + unsigned short *buf = addr; + unsigned short *portp; + + if (port >= LAN_IOSTART && port < LAN_IOEND) { + portp = PORT2ADDR_NE(port); + while (count--) + *buf++ = *(volatile unsigned short *)portp; +#if defined(CONFIG_PCMCIA) && defined(CONFIG_M32R_CFC) + } else if (port >= M32R_PCC_IOSTART0 && port <= M32R_PCC_IOEND0) { + pcc_ioread_word(9, port, (void *)addr, sizeof(unsigned short), + count, 1); +#endif +#if defined(CONFIG_IDE) + } else if ( ((port >= 0x170 && port <=0x177) || port == 0x376) || + ((port >= 0x1f0 && port <=0x1f7) || port == 0x3f6) ){ + portp = __port2addr_ata(port); + while (count--) + *buf++ = *(volatile unsigned short *)portp; +#endif + } else { + portp = PORT2ADDR(port); + while (count--) + *buf++ = *(volatile unsigned short *)portp; + } +} + +void _insl(unsigned int port, void * addr, unsigned long count) +{ + unsigned long *buf = addr; + unsigned long *portp; + + portp = PORT2ADDR(port); + while (count--) + *buf++ = *(volatile unsigned long *)portp; +} + +void _outsb(unsigned int port, const void * addr, unsigned long count) +{ + const unsigned char *buf = addr; + unsigned char *portp; + + if (port >= LAN_IOSTART && port < LAN_IOEND) { + portp = PORT2ADDR_NE(port); + while (count--) + _ne_outb(*buf++, portp); +#if defined(CONFIG_IDE) + } else if ( ((port >= 0x170 && port <=0x177) || port == 0x376) || + ((port >= 0x1f0 && port <=0x1f7) || port == 0x3f6) ){ + portp = __port2addr_ata(port); + while (count--) + *(volatile unsigned char *)portp = *buf++; +#endif +#if defined(CONFIG_PCMCIA) && defined(CONFIG_M32R_CFC) + } else if (port >= M32R_PCC_IOSTART0 && port <= M32R_PCC_IOEND0) { + pcc_iowrite_byte(0, port, (void *)addr, sizeof(unsigned char), + count, 1); +#endif + } else { + portp = PORT2ADDR(port); + while (count--) + *(volatile unsigned char *)portp = *buf++; + } +} + +void _outsw(unsigned int port, const void * addr, unsigned long count) +{ + const unsigned short *buf = addr; + unsigned short *portp; + + if (port >= LAN_IOSTART && port < LAN_IOEND) { + portp = PORT2ADDR_NE(port); + while (count--) + *(volatile unsigned short *)portp = *buf++; +#if defined(CONFIG_IDE) + } else if ( ((port >= 0x170 && port <=0x177) || port == 0x376) || + ((port >= 0x1f0 && port <=0x1f7) || port == 0x3f6) ){ + portp = __port2addr_ata(port); + while (count--) + *(volatile unsigned short *)portp = *buf++; +#endif +#if defined(CONFIG_PCMCIA) && defined(CONFIG_M32R_CFC) + } else if (port >= M32R_PCC_IOSTART0 && port <= M32R_PCC_IOEND0) { + pcc_iowrite_word(9, port, (void *)addr, sizeof(unsigned short), + count, 1); +#endif + } else { + portp = PORT2ADDR(port); + while (count--) + *(volatile unsigned short *)portp = *buf++; + } +} + +void _outsl(unsigned int port, const void * addr, unsigned long count) +{ + const unsigned long *buf = addr; + unsigned char *portp; + + portp = PORT2ADDR(port); + while (count--) + *(volatile unsigned long *)portp = *buf++; +} diff --git a/arch/m32r/platforms/mappi3/setup.c b/arch/m32r/platforms/mappi3/setup.c new file mode 100644 index 000000000..a3646d4b0 --- /dev/null +++ b/arch/m32r/platforms/mappi3/setup.c @@ -0,0 +1,220 @@ +/* + * linux/arch/m32r/platforms/mappi3/setup.c + * + * Setup routines for Renesas MAPPI-III(M3A-2170) Board + * + * Copyright (c) 2001-2005 Hiroyuki Kondo, Hirokazu Takata, + * Hitoshi Yamamoto, Mamoru Sakugawa + */ + +#include <linux/irq.h> +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/platform_device.h> + +#include <asm/m32r.h> +#include <asm/io.h> + +#define irq2port(x) (M32R_ICU_CR1_PORTL + ((x - 1) * sizeof(unsigned long))) + +icu_data_t icu_data[NR_IRQS]; + +static void disable_mappi3_irq(unsigned int irq) +{ + unsigned long port, data; + + if ((irq == 0) ||(irq >= NR_IRQS)) { + printk("bad irq 0x%08x\n", irq); + return; + } + port = irq2port(irq); + data = icu_data[irq].icucr|M32R_ICUCR_ILEVEL7; + outl(data, port); +} + +static void enable_mappi3_irq(unsigned int irq) +{ + unsigned long port, data; + + if ((irq == 0) ||(irq >= NR_IRQS)) { + printk("bad irq 0x%08x\n", irq); + return; + } + port = irq2port(irq); + data = icu_data[irq].icucr|M32R_ICUCR_IEN|M32R_ICUCR_ILEVEL6; + outl(data, port); +} + +static void mask_mappi3(struct irq_data *data) +{ + disable_mappi3_irq(data->irq); +} + +static void unmask_mappi3(struct irq_data *data) +{ + enable_mappi3_irq(data->irq); +} + +static void shutdown_mappi3(struct irq_data *data) +{ + unsigned long port; + + port = irq2port(data->irq); + outl(M32R_ICUCR_ILEVEL7, port); +} + +static struct irq_chip mappi3_irq_type = { + .name = "MAPPI3-IRQ", + .irq_shutdown = shutdown_mappi3, + .irq_mask = mask_mappi3, + .irq_unmask = unmask_mappi3, +}; + +void __init init_IRQ(void) +{ +#if defined(CONFIG_SMC91X) + /* INT0 : LAN controller (SMC91111) */ + irq_set_chip_and_handler(M32R_IRQ_INT0, &mappi3_irq_type, + handle_level_irq); + icu_data[M32R_IRQ_INT0].icucr = M32R_ICUCR_IEN|M32R_ICUCR_ISMOD10; + disable_mappi3_irq(M32R_IRQ_INT0); +#endif /* CONFIG_SMC91X */ + + /* MFT2 : system timer */ + irq_set_chip_and_handler(M32R_IRQ_MFT2, &mappi3_irq_type, + handle_level_irq); + icu_data[M32R_IRQ_MFT2].icucr = M32R_ICUCR_IEN; + disable_mappi3_irq(M32R_IRQ_MFT2); + +#ifdef CONFIG_SERIAL_M32R_SIO + /* SIO0_R : uart receive data */ + irq_set_chip_and_handler(M32R_IRQ_SIO0_R, &mappi3_irq_type, + handle_level_irq); + icu_data[M32R_IRQ_SIO0_R].icucr = 0; + disable_mappi3_irq(M32R_IRQ_SIO0_R); + + /* SIO0_S : uart send data */ + irq_set_chip_and_handler(M32R_IRQ_SIO0_S, &mappi3_irq_type, + handle_level_irq); + icu_data[M32R_IRQ_SIO0_S].icucr = 0; + disable_mappi3_irq(M32R_IRQ_SIO0_S); + /* SIO1_R : uart receive data */ + irq_set_chip_and_handler(M32R_IRQ_SIO1_R, &mappi3_irq_type, + handle_level_irq); + icu_data[M32R_IRQ_SIO1_R].icucr = 0; + disable_mappi3_irq(M32R_IRQ_SIO1_R); + + /* SIO1_S : uart send data */ + irq_set_chip_and_handler(M32R_IRQ_SIO1_S, &mappi3_irq_type, + handle_level_irq); + icu_data[M32R_IRQ_SIO1_S].icucr = 0; + disable_mappi3_irq(M32R_IRQ_SIO1_S); +#endif /* CONFIG_M32R_USE_DBG_CONSOLE */ + +#if defined(CONFIG_USB) + /* INT1 : USB Host controller interrupt */ + irq_set_chip_and_handler(M32R_IRQ_INT1, &mappi3_irq_type, + handle_level_irq); + icu_data[M32R_IRQ_INT1].icucr = M32R_ICUCR_ISMOD01; + disable_mappi3_irq(M32R_IRQ_INT1); +#endif /* CONFIG_USB */ + + /* CFC IREQ */ + irq_set_chip_and_handler(PLD_IRQ_CFIREQ, &mappi3_irq_type, + handle_level_irq); + icu_data[PLD_IRQ_CFIREQ].icucr = M32R_ICUCR_IEN|M32R_ICUCR_ISMOD01; + disable_mappi3_irq(PLD_IRQ_CFIREQ); + +#if defined(CONFIG_M32R_CFC) + /* ICUCR41: CFC Insert & eject */ + irq_set_chip_and_handler(PLD_IRQ_CFC_INSERT, &mappi3_irq_type, + handle_level_irq); + icu_data[PLD_IRQ_CFC_INSERT].icucr = M32R_ICUCR_IEN|M32R_ICUCR_ISMOD00; + disable_mappi3_irq(PLD_IRQ_CFC_INSERT); + +#endif /* CONFIG_M32R_CFC */ + + /* IDE IREQ */ + irq_set_chip_and_handler(PLD_IRQ_IDEIREQ, &mappi3_irq_type, + handle_level_irq); + icu_data[PLD_IRQ_IDEIREQ].icucr = M32R_ICUCR_IEN|M32R_ICUCR_ISMOD10; + disable_mappi3_irq(PLD_IRQ_IDEIREQ); + +} + +#if defined(CONFIG_SMC91X) + +#define LAN_IOSTART 0x300 +#define LAN_IOEND 0x320 +static struct resource smc91x_resources[] = { + [0] = { + .start = (LAN_IOSTART), + .end = (LAN_IOEND), + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = M32R_IRQ_INT0, + .end = M32R_IRQ_INT0, + .flags = IORESOURCE_IRQ, + } +}; + +static struct platform_device smc91x_device = { + .name = "smc91x", + .id = 0, + .num_resources = ARRAY_SIZE(smc91x_resources), + .resource = smc91x_resources, +}; + +#endif + +#if defined(CONFIG_FB_S1D13XXX) + +#include <video/s1d13xxxfb.h> +#include <asm/s1d13806.h> + +static struct s1d13xxxfb_pdata s1d13xxxfb_data = { + .initregs = s1d13xxxfb_initregs, + .initregssize = ARRAY_SIZE(s1d13xxxfb_initregs), + .platform_init_video = NULL, +#ifdef CONFIG_PM + .platform_suspend_video = NULL, + .platform_resume_video = NULL, +#endif +}; + +static struct resource s1d13xxxfb_resources[] = { + [0] = { + .start = 0x1d600000UL, + .end = 0x1d73FFFFUL, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = 0x1d400000UL, + .end = 0x1d4001FFUL, + .flags = IORESOURCE_MEM, + } +}; + +static struct platform_device s1d13xxxfb_device = { + .name = S1D_DEVICENAME, + .id = 0, + .dev = { + .platform_data = &s1d13xxxfb_data, + }, + .num_resources = ARRAY_SIZE(s1d13xxxfb_resources), + .resource = s1d13xxxfb_resources, +}; +#endif + +static int __init platform_init(void) +{ +#if defined(CONFIG_SMC91X) + platform_device_register(&smc91x_device); +#endif +#if defined(CONFIG_FB_S1D13XXX) + platform_device_register(&s1d13xxxfb_device); +#endif + return 0; +} +arch_initcall(platform_init); diff --git a/arch/m32r/platforms/oaks32r/Makefile b/arch/m32r/platforms/oaks32r/Makefile new file mode 100644 index 000000000..0de59084f --- /dev/null +++ b/arch/m32r/platforms/oaks32r/Makefile @@ -0,0 +1 @@ +obj-y := setup.o io.o diff --git a/arch/m32r/platforms/oaks32r/dot.gdbinit.nommu b/arch/m32r/platforms/oaks32r/dot.gdbinit.nommu new file mode 100644 index 000000000..d481d972b --- /dev/null +++ b/arch/m32r/platforms/oaks32r/dot.gdbinit.nommu @@ -0,0 +1,154 @@ +# .gdbinit file +# $Id: dot.gdbinit.oaks32r,v 1.4 2004/10/20 02:24:37 takata Exp $ +#----- +# NOTE: this file is generated by a script, "gen_gdbinit.pl". +# (Please type "gen_gdbinit.pl --help" and check the help message). +# $ Id: gen_gdbinit.pl,v 1.12 2004/07/26 09:56:10 takata Exp $ +#----- +# target platform: oaks32r + +# setting +set width 0d70 +set radix 0d16 + +# clk xin:cpu:bus=16:66:33 +define clock_init + set *(unsigned long *)0x00ef4008 = 1 + shell sleep 0.1 + set *(unsigned long *)0x00ef4000 = 0x00020100 +end + +# Initialize programmable ports +define port_init + set *(unsigned long *)0x00ef1000 = 0x1 + set *(unsigned long *)0x00ef1060 = 0x01400001 + set *(unsigned long *)0x00ef1064 = 0x00015555 + set *(unsigned long *)0x00ef1068 = 0x55555050 + set *(unsigned long *)0x00ef106c = 0x05150040 +end + +# Initialize SDRAM controller +define sdram_init + set *(unsigned long *)0x00ef6008 = 0x00000182 + set *(unsigned long *)0x00ef600c = 0x00000001 + shell sleep 0.1 + set *(unsigned long *)0x00ef602c = 0x00000010 + set *(unsigned long *)0x00ef6028 = 0x00000300 + set *(unsigned long *)0x00ef6048 = 0x00000001 + set *(unsigned long *)0x00ef6020 = 0x01000041 + set *(unsigned long *)0x00ef6004 = 0x00010117 + set *(unsigned long *)0x00ef6010 = 0x00000001 + set *(unsigned long *)0x00ef6024 = 0x00000001 +end +document sdram_init + SDRAM controller initialization + 0x01000000 - 0x017fffff (8MB) +end + +# Initialize LAN controller +define lanc_init + set *(unsigned long *)0x00ef5008 = 0x03031303 + #RST DRV (P64) + set *(unsigned char *)0x00ef1046 = 0x08 + set *(unsigned char *)0x00ef1026 = 0xff + set *(unsigned char *)0x00ef1026 = 0x00 + set *(unsigned short *)0x02000630 = 0xffff +end + +# Show current task structure +define show_current + set $current = $spi & 0xffffe000 + printf "$current=0x%08lX\n",$current + print *(struct task_struct *)$current +end + +# Show user assigned task structure +define show_task + set = $arg0 & 0xffffe000 + printf "$task=0x%08lX\n",$task + print *(struct task_struct *)$task +end +document show_task + Show user assigned task structure + arg0 : task structure address +end + +# Show M32R registers +define show_regs + printf " R0[0x%08lX] R1[0x%08lX] R2[0x%08lX] R3[0x%08lX]\n",$r0,$r1,$r2,$r3 + printf " R4[0x%08lX] R5[0x%08lX] R6[0x%08lX] R7[0x%08lX]\n",$r4,$r5,$r6,$r7 + printf " R8[0x%08lX] R9[0x%08lX] R10[0x%08lX] R11[0x%08lX]\n",$r8,$r9,$r10,$r11 + printf "R12[0x%08lX] FP[0x%08lX] LR[0x%08lX] SP[0x%08lX]\n",$r12,$fp,$lr,$sp + printf "PSW[0x%08lX] CBR[0x%08lX] SPI[0x%08lX] SPU[0x%08lX]\n",$psw,$cbr,$spi,$spu + printf "BPC[0x%08lX] PC[0x%08lX] ACCL[0x%08lX] ACCH[0x%08lX]\n",$bpc,$pc,$accl,$acch +end + +# Setup all +define setup + use_mon_code + set *(unsigned int)0xfffffffc=0x60 + shell sleep 0.1 + clock_init + shell sleep 0.1 + port_init + sdram_init + lanc_init +end + +# Load modules +define load_modules + use_debug_dma + load +end + +# Set kernel parameters +define set_kernel_parameters + set $param = (void*)0x01001000 + # INITRD_START +# set *(unsigned long *)($param + 0x0010) = 0x00000000 + # INITRD_SIZE +# set *(unsigned long *)($param + 0x0014) = 0x00000000 + # M32R_CPUCLK + set *(unsigned long *)($param + 0x0018) = 0d66666667 + # M32R_BUSCLK + set *(unsigned long *)($param + 0x001c) = 0d33333333 + + # M32R_TIMER_DIVIDE + set *(unsigned long *)($param + 0x0020) = 0d128 + + set {char[0x200]}($param + 0x100) = "console=ttyS0,115200n8x root=/dev/nfsroot nfsroot=192.168.0.1:/project/m32r-linux/export/rootfs nfsaddrs=192.168.0.101:192.168.0.1:192.168.0.1:255.255.255.0:mappi001 \0" +end + +# Boot +define boot + set_kernel_parameters + set $fp = 0 + set $pc = 0x01002000 + si + c +end + +# Set breakpoints +define set_breakpoints + b *0x00000020 + b *0x00000030 +end + +# Restart +define restart + sdireset + sdireset + setup + load_modules + boot +end + +sdireset +sdireset +file vmlinux +target m32rsdi +setup +#load_modules +#set_breakpoints +#boot + diff --git a/arch/m32r/platforms/oaks32r/io.c b/arch/m32r/platforms/oaks32r/io.c new file mode 100644 index 000000000..364a3b2e8 --- /dev/null +++ b/arch/m32r/platforms/oaks32r/io.c @@ -0,0 +1,228 @@ +/* + * linux/arch/m32r/platforms/oaks32r/io.c + * + * Typical I/O routines for OAKS32R board. + * + * Copyright (c) 2001-2005 Hiroyuki Kondo, Hirokazu Takata, + * Hitoshi Yamamoto, Mamoru Sakugawa + */ + +#include <asm/m32r.h> +#include <asm/page.h> +#include <asm/io.h> + +#define PORT2ADDR(port) _port2addr(port) + +static inline void *_port2addr(unsigned long port) +{ + return (void *)(port | NONCACHE_OFFSET); +} + +static inline void *_port2addr_ne(unsigned long port) +{ + return (void *)((port<<1) + NONCACHE_OFFSET + 0x02000000); +} + +static inline void delay(void) +{ + __asm__ __volatile__ ("push r0; \n\t pop r0;" : : :"memory"); +} + +/* + * NIC I/O function + */ + +#define PORT2ADDR_NE(port) _port2addr_ne(port) + +static inline unsigned char _ne_inb(void *portp) +{ + return *(volatile unsigned char *)(portp+1); +} + +static inline unsigned short _ne_inw(void *portp) +{ + unsigned short tmp; + + tmp = *(unsigned short *)(portp) & 0xff; + tmp |= *(unsigned short *)(portp+2) << 8; + return tmp; +} + +static inline void _ne_insb(void *portp, void *addr, unsigned long count) +{ + unsigned char *buf = addr; + while (count--) + *buf++ = *(volatile unsigned char *)(portp+1); +} + +static inline void _ne_outb(unsigned char b, void *portp) +{ + *(volatile unsigned char *)(portp+1) = b; +} + +static inline void _ne_outw(unsigned short w, void *portp) +{ + *(volatile unsigned short *)portp = (w >> 8); + *(volatile unsigned short *)(portp+2) = (w & 0xff); +} + +unsigned char _inb(unsigned long port) +{ + if (port >= 0x300 && port < 0x320) + return _ne_inb(PORT2ADDR_NE(port)); + + return *(volatile unsigned char *)PORT2ADDR(port); +} + +unsigned short _inw(unsigned long port) +{ + if (port >= 0x300 && port < 0x320) + return _ne_inw(PORT2ADDR_NE(port)); + + return *(volatile unsigned short *)PORT2ADDR(port); +} + +unsigned long _inl(unsigned long port) +{ + return *(volatile unsigned long *)PORT2ADDR(port); +} + +unsigned char _inb_p(unsigned long port) +{ + unsigned char v = _inb(port); + delay(); + return (v); +} + +unsigned short _inw_p(unsigned long port) +{ + unsigned short v = _inw(port); + delay(); + return (v); +} + +unsigned long _inl_p(unsigned long port) +{ + unsigned long v = _inl(port); + delay(); + return (v); +} + +void _outb(unsigned char b, unsigned long port) +{ + if (port >= 0x300 && port < 0x320) + _ne_outb(b, PORT2ADDR_NE(port)); + else + *(volatile unsigned char *)PORT2ADDR(port) = b; +} + +void _outw(unsigned short w, unsigned long port) +{ + if (port >= 0x300 && port < 0x320) + _ne_outw(w, PORT2ADDR_NE(port)); + else + *(volatile unsigned short *)PORT2ADDR(port) = w; +} + +void _outl(unsigned long l, unsigned long port) +{ + *(volatile unsigned long *)PORT2ADDR(port) = l; +} + +void _outb_p(unsigned char b, unsigned long port) +{ + _outb(b, port); + delay(); +} + +void _outw_p(unsigned short w, unsigned long port) +{ + _outw(w, port); + delay(); +} + +void _outl_p(unsigned long l, unsigned long port) +{ + _outl(l, port); + delay(); +} + +void _insb(unsigned int port, void *addr, unsigned long count) +{ + if (port >= 0x300 && port < 0x320) + _ne_insb(PORT2ADDR_NE(port), addr, count); + else { + unsigned char *buf = addr; + unsigned char *portp = PORT2ADDR(port); + while (count--) + *buf++ = *(volatile unsigned char *)portp; + } +} + +void _insw(unsigned int port, void *addr, unsigned long count) +{ + unsigned short *buf = addr; + unsigned short *portp; + + if (port >= 0x300 && port < 0x320) { + portp = PORT2ADDR_NE(port); + while (count--) + *buf++ = _ne_inw(portp); + } else { + portp = PORT2ADDR(port); + while (count--) + *buf++ = *(volatile unsigned short *)portp; + } +} + +void _insl(unsigned int port, void *addr, unsigned long count) +{ + unsigned long *buf = addr; + unsigned long *portp; + + portp = PORT2ADDR(port); + while (count--) + *buf++ = *(volatile unsigned long *)portp; +} + +void _outsb(unsigned int port, const void *addr, unsigned long count) +{ + const unsigned char *buf = addr; + unsigned char *portp; + + if (port >= 0x300 && port < 0x320) { + portp = PORT2ADDR_NE(port); + while (count--) + _ne_outb(*buf++, portp); + } else { + portp = PORT2ADDR(port); + while (count--) + *(volatile unsigned char *)portp = *buf++; + } +} + +void _outsw(unsigned int port, const void *addr, unsigned long count) +{ + const unsigned short *buf = addr; + unsigned short *portp; + + if (port >= 0x300 && port < 0x320) { + portp = PORT2ADDR_NE(port); + while (count--) + _ne_outw(*buf++, portp); + } else { + portp = PORT2ADDR(port); + while (count--) + *(volatile unsigned short *)portp = *buf++; + } +} + +void _outsl(unsigned int port, const void *addr, unsigned long count) +{ + const unsigned long *buf = addr; + unsigned char *portp; + + portp = PORT2ADDR(port); + while (count--) + *(volatile unsigned long *)portp = *buf++; +} diff --git a/arch/m32r/platforms/oaks32r/setup.c b/arch/m32r/platforms/oaks32r/setup.c new file mode 100644 index 000000000..f8373c069 --- /dev/null +++ b/arch/m32r/platforms/oaks32r/setup.c @@ -0,0 +1,113 @@ +/* + * linux/arch/m32r/platforms/oaks32r/setup.c + * + * Setup routines for OAKS32R Board + * + * Copyright (c) 2002-2005 Hiroyuki Kondo, Hirokazu Takata, + * Hitoshi Yamamoto, Mamoru Sakugawa + */ + +#include <linux/irq.h> +#include <linux/kernel.h> +#include <linux/init.h> + +#include <asm/m32r.h> +#include <asm/io.h> + +#define irq2port(x) (M32R_ICU_CR1_PORTL + ((x - 1) * sizeof(unsigned long))) + +icu_data_t icu_data[NR_IRQS]; + +static void disable_oaks32r_irq(unsigned int irq) +{ + unsigned long port, data; + + port = irq2port(irq); + data = icu_data[irq].icucr|M32R_ICUCR_ILEVEL7; + outl(data, port); +} + +static void enable_oaks32r_irq(unsigned int irq) +{ + unsigned long port, data; + + port = irq2port(irq); + data = icu_data[irq].icucr|M32R_ICUCR_IEN|M32R_ICUCR_ILEVEL6; + outl(data, port); +} + +static void mask_oaks32r(struct irq_data *data) +{ + disable_oaks32r_irq(data->irq); +} + +static void unmask_oaks32r(struct irq_data *data) +{ + enable_oaks32r_irq(data->irq); +} + +static void shutdown_oaks32r(struct irq_data *data) +{ + unsigned long port; + + port = irq2port(data->irq); + outl(M32R_ICUCR_ILEVEL7, port); +} + +static struct irq_chip oaks32r_irq_type = +{ + .name = "OAKS32R-IRQ", + .irq_shutdown = shutdown_oaks32r, + .irq_mask = mask_oaks32r, + .irq_unmask = unmask_oaks32r, +}; + +void __init init_IRQ(void) +{ + static int once = 0; + + if (once) + return; + else + once++; + +#ifdef CONFIG_NE2000 + /* INT3 : LAN controller (RTL8019AS) */ + irq_set_chip_and_handler(M32R_IRQ_INT3, &oaks32r_irq_type, + handle_level_irq); + icu_data[M32R_IRQ_INT3].icucr = M32R_ICUCR_IEN|M32R_ICUCR_ISMOD10; + disable_oaks32r_irq(M32R_IRQ_INT3); +#endif /* CONFIG_M32R_NE2000 */ + + /* MFT2 : system timer */ + irq_set_chip_and_handler(M32R_IRQ_MFT2, &oaks32r_irq_type, + handle_level_irq); + icu_data[M32R_IRQ_MFT2].icucr = M32R_ICUCR_IEN; + disable_oaks32r_irq(M32R_IRQ_MFT2); + +#ifdef CONFIG_SERIAL_M32R_SIO + /* SIO0_R : uart receive data */ + irq_set_chip_and_handler(M32R_IRQ_SIO0_R, &oaks32r_irq_type, + handle_level_irq); + icu_data[M32R_IRQ_SIO0_R].icucr = 0; + disable_oaks32r_irq(M32R_IRQ_SIO0_R); + + /* SIO0_S : uart send data */ + irq_set_chip_and_handler(M32R_IRQ_SIO0_S, &oaks32r_irq_type, + handle_level_irq); + icu_data[M32R_IRQ_SIO0_S].icucr = 0; + disable_oaks32r_irq(M32R_IRQ_SIO0_S); + + /* SIO1_R : uart receive data */ + irq_set_chip_and_handler(M32R_IRQ_SIO1_R, &oaks32r_irq_type, + handle_level_irq); + icu_data[M32R_IRQ_SIO1_R].icucr = 0; + disable_oaks32r_irq(M32R_IRQ_SIO1_R); + + /* SIO1_S : uart send data */ + irq_set_chip_and_handler(M32R_IRQ_SIO1_S, &oaks32r_irq_type, + handle_level_irq); + icu_data[M32R_IRQ_SIO1_S].icucr = 0; + disable_oaks32r_irq(M32R_IRQ_SIO1_S); +#endif /* CONFIG_SERIAL_M32R_SIO */ +} diff --git a/arch/m32r/platforms/opsput/Makefile b/arch/m32r/platforms/opsput/Makefile new file mode 100644 index 000000000..0de59084f --- /dev/null +++ b/arch/m32r/platforms/opsput/Makefile @@ -0,0 +1 @@ +obj-y := setup.o io.o diff --git a/arch/m32r/platforms/opsput/dot.gdbinit b/arch/m32r/platforms/opsput/dot.gdbinit new file mode 100644 index 000000000..b7e6c6640 --- /dev/null +++ b/arch/m32r/platforms/opsput/dot.gdbinit @@ -0,0 +1,218 @@ +# .gdbinit file +# $Id: dot.gdbinit,v 1.1 2004/07/27 06:54:20 sakugawa Exp $ + +# setting +set width 0d70 +set radix 0d16 +set height 0 +debug_chaos + +# clk xin:cpu:bus=1:8:1 +define clock_init_on_181 + set *(unsigned long *)0x00ef400c = 0x2 + set *(unsigned long *)0x00ef4004 = 0x1 + shell sleep 0.1 + set *(unsigned long *)0x00ef4000 = 0x101 +end +# clk xin:cpu:bus=1:8:2 +define clock_init_on_182 + set *(unsigned long *)0x00ef400c = 0x1 + set *(unsigned long *)0x00ef4004 = 0x1 + shell sleep 0.1 + set *(unsigned long *)0x00ef4000 = 0x101 +end + +# clk xin:cpu:bus=1:8:4 +define clock_init_on_184 + set *(unsigned long *)0x00ef400c = 0x0 + set *(unsigned long *)0x00ef4004 = 0x1 + shell sleep 0.1 + set *(unsigned long *)0x00ef4000 = 0x101 +end + +# clk xin:cpu:bus=1:1:1 +define clock_init_off + shell sleep 0.1 + set *(unsigned long *)0x00ef4000 = 0x0 + shell sleep 0.1 + set *(unsigned long *)0x00ef4004 = 0x0 + shell sleep 0.1 + set *(unsigned long *)0x00ef400c = 0x0 +end + +define tlb_init + set $tlbbase = 0xfe000000 + set *(unsigned long *)($tlbbase + 0x04) = 0x0 + set *(unsigned long *)($tlbbase + 0x0c) = 0x0 + set *(unsigned long *)($tlbbase + 0x14) = 0x0 + set *(unsigned long *)($tlbbase + 0x1c) = 0x0 + set *(unsigned long *)($tlbbase + 0x24) = 0x0 + set *(unsigned long *)($tlbbase + 0x2c) = 0x0 + set *(unsigned long *)($tlbbase + 0x34) = 0x0 + set *(unsigned long *)($tlbbase + 0x3c) = 0x0 + set *(unsigned long *)($tlbbase + 0x44) = 0x0 + set *(unsigned long *)($tlbbase + 0x4c) = 0x0 + set *(unsigned long *)($tlbbase + 0x54) = 0x0 + set *(unsigned long *)($tlbbase + 0x5c) = 0x0 + set *(unsigned long *)($tlbbase + 0x64) = 0x0 + set *(unsigned long *)($tlbbase + 0x6c) = 0x0 + set *(unsigned long *)($tlbbase + 0x74) = 0x0 + set *(unsigned long *)($tlbbase + 0x7c) = 0x0 + set *(unsigned long *)($tlbbase + 0x84) = 0x0 + set *(unsigned long *)($tlbbase + 0x8c) = 0x0 + set *(unsigned long *)($tlbbase + 0x94) = 0x0 + set *(unsigned long *)($tlbbase + 0x9c) = 0x0 + set *(unsigned long *)($tlbbase + 0xa4) = 0x0 + set *(unsigned long *)($tlbbase + 0xac) = 0x0 + set *(unsigned long *)($tlbbase + 0xb4) = 0x0 + set *(unsigned long *)($tlbbase + 0xbc) = 0x0 + set *(unsigned long *)($tlbbase + 0xc4) = 0x0 + set *(unsigned long *)($tlbbase + 0xcc) = 0x0 + set *(unsigned long *)($tlbbase + 0xd4) = 0x0 + set *(unsigned long *)($tlbbase + 0xdc) = 0x0 + set *(unsigned long *)($tlbbase + 0xe4) = 0x0 + set *(unsigned long *)($tlbbase + 0xec) = 0x0 + set *(unsigned long *)($tlbbase + 0xf4) = 0x0 + set *(unsigned long *)($tlbbase + 0xfc) = 0x0 + set $tlbbase = 0xfe000800 + set *(unsigned long *)($tlbbase + 0x04) = 0x0 + set *(unsigned long *)($tlbbase + 0x0c) = 0x0 + set *(unsigned long *)($tlbbase + 0x14) = 0x0 + set *(unsigned long *)($tlbbase + 0x1c) = 0x0 + set *(unsigned long *)($tlbbase + 0x24) = 0x0 + set *(unsigned long *)($tlbbase + 0x2c) = 0x0 + set *(unsigned long *)($tlbbase + 0x34) = 0x0 + set *(unsigned long *)($tlbbase + 0x3c) = 0x0 + set *(unsigned long *)($tlbbase + 0x44) = 0x0 + set *(unsigned long *)($tlbbase + 0x4c) = 0x0 + set *(unsigned long *)($tlbbase + 0x54) = 0x0 + set *(unsigned long *)($tlbbase + 0x5c) = 0x0 + set *(unsigned long *)($tlbbase + 0x64) = 0x0 + set *(unsigned long *)($tlbbase + 0x6c) = 0x0 + set *(unsigned long *)($tlbbase + 0x74) = 0x0 + set *(unsigned long *)($tlbbase + 0x7c) = 0x0 + set *(unsigned long *)($tlbbase + 0x84) = 0x0 + set *(unsigned long *)($tlbbase + 0x8c) = 0x0 + set *(unsigned long *)($tlbbase + 0x94) = 0x0 + set *(unsigned long *)($tlbbase + 0x9c) = 0x0 + set *(unsigned long *)($tlbbase + 0xa4) = 0x0 + set *(unsigned long *)($tlbbase + 0xac) = 0x0 + set *(unsigned long *)($tlbbase + 0xb4) = 0x0 + set *(unsigned long *)($tlbbase + 0xbc) = 0x0 + set *(unsigned long *)($tlbbase + 0xc4) = 0x0 + set *(unsigned long *)($tlbbase + 0xcc) = 0x0 + set *(unsigned long *)($tlbbase + 0xd4) = 0x0 + set *(unsigned long *)($tlbbase + 0xdc) = 0x0 + set *(unsigned long *)($tlbbase + 0xe4) = 0x0 + set *(unsigned long *)($tlbbase + 0xec) = 0x0 + set *(unsigned long *)($tlbbase + 0xf4) = 0x0 + set *(unsigned long *)($tlbbase + 0xfc) = 0x0 +end + +define load_modules + use_debug_dma + load +end + +# Set kernel parameters +define set_kernel_parameters + set $param = (void*)0x88001000 + # INITRD_START +# set *(unsigned long *)($param + 0x0010) = 0x08300000 + # INITRD_SIZE +# set *(unsigned long *)($param + 0x0014) = 0x00400000 + # M32R_CPUCLK + set *(unsigned long *)($param + 0x0018) = 0d200000000 + # M32R_BUSCLK + set *(unsigned long *)($param + 0x001c) = 0d50000000 +# set *(unsigned long *)($param + 0x001c) = 0d25000000 + + # M32R_TIMER_DIVIDE + set *(unsigned long *)($param + 0x0020) = 0d128 + + set {char[0x200]}($param + 0x100) = "console=ttyS0,115200n8x console=tty1 \ + root=/dev/nfsroot \ + nfsroot=192.168.0.1:/project/m32r-linux/export/root.2.6 \ + nfsaddrs=192.168.0.101:192.168.0.1:192.168.0.1:255.255.255.0:mappi001 \ + mem=16m \0" +end + +define boot + set_kernel_parameters + set $pc=0x88002000 + set $fp=0 + set $evb=0x88000000 + si + c +end + +# Show TLB entries +define show_tlb_entries + set $i = 0 + set $addr = $arg0 + use_mon_code + while ($i < 0d32 ) + set $tlb_tag = *(unsigned long*)$addr + set $tlb_data = *(unsigned long*)($addr + 4) + printf " [%2d] 0x%08lx : 0x%08lx - 0x%08lx\n", $i, $addr, $tlb_tag, $tlb_data + set $i = $i + 1 + set $addr = $addr + 8 + end +# use_debug_dma +end +define itlb + set $itlb=0xfe000000 + show_tlb_entries $itlb +end +define dtlb + set $dtlb=0xfe000800 + show_tlb_entries $dtlb +end + +define show_regs + printf " R0[%08lx] R1[%08lx] R2[%08lx] R3[%08lx]\n",$r0,$r1,$r2,$r3 + printf " R4[%08lx] R5[%08lx] R6[%08lx] R7[%08lx]\n",$r4,$r5,$r6,$r7 + printf " R8[%08lx] R9[%08lx] R10[%08lx] R11[%08lx]\n",$r8,$r9,$r10,$r11 + printf "R12[%08lx] FP[%08lx] LR[%08lx] SP[%08lx]\n",$r12,$fp,$lr,$sp + printf "PSW[%08lx] CBR[%08lx] SPI[%08lx] SPU[%08lx]\n",$psw,$cbr,$spi,$spu + printf "BPC[%08lx] PC[%08lx] ACCL[%08lx] ACCH[%08lx]\n",$bpc,$pc,$accl,$acch + printf "EVB[%08lx]\n",$evb +end + +define restart + sdireset + sdireset + en 1 + set $pc=0x0 + c + tlb_init + setup + load_modules + boot +end + +define setup + debug_chaos +# Clock +# shell sleep 0.1 +# clock_init_off +# shell sleep 1 +# clock_init_on_182 +# shell sleep 0.1 +# SDRAM + set *(unsigned long *)0xa0ef6004 = 0x0001053f + set *(unsigned long *)0xa0ef6028 = 0x00031102 +end + +sdireset +sdireset +file vmlinux +target m32rsdi +set $pc=0x0 +b *0x30000 +c +dis 1 +setup +tlb_init +load_modules +boot diff --git a/arch/m32r/platforms/opsput/io.c b/arch/m32r/platforms/opsput/io.c new file mode 100644 index 000000000..379efb771 --- /dev/null +++ b/arch/m32r/platforms/opsput/io.c @@ -0,0 +1,395 @@ +/* + * linux/arch/m32r/platforms/opsput/io.c + * + * Typical I/O routines for OPSPUT board. + * + * Copyright (c) 2001-2005 Hiroyuki Kondo, Hirokazu Takata, + * Hitoshi Yamamoto, Takeo Takahashi + * + * This file is subject to the terms and conditions of the GNU General + * Public License. See the file "COPYING" in the main directory of this + * archive for more details. + */ + +#include <asm/m32r.h> +#include <asm/page.h> +#include <asm/io.h> +#include <asm/byteorder.h> + +#if defined(CONFIG_PCMCIA) && defined(CONFIG_M32R_CFC) +#include <linux/types.h> + +#define M32R_PCC_IOMAP_SIZE 0x1000 + +#define M32R_PCC_IOSTART0 0x1000 +#define M32R_PCC_IOEND0 (M32R_PCC_IOSTART0 + M32R_PCC_IOMAP_SIZE - 1) + +extern void pcc_ioread_byte(int, unsigned long, void *, size_t, size_t, int); +extern void pcc_ioread_word(int, unsigned long, void *, size_t, size_t, int); +extern void pcc_iowrite_byte(int, unsigned long, void *, size_t, size_t, int); +extern void pcc_iowrite_word(int, unsigned long, void *, size_t, size_t, int); +#endif /* CONFIG_PCMCIA && CONFIG_M32R_CFC */ + +#define PORT2ADDR(port) _port2addr(port) +#define PORT2ADDR_USB(port) _port2addr_usb(port) + +static inline void *_port2addr(unsigned long port) +{ + return (void *)(port | NONCACHE_OFFSET); +} + +#if defined(CONFIG_IDE) && !defined(CONFIG_M32R_CFC) +static inline void *__port2addr_ata(unsigned long port) +{ + static int dummy_reg; + + switch (port) { + case 0x1f0: return (void *)(0x0c002000 | NONCACHE_OFFSET); + case 0x1f1: return (void *)(0x0c012800 | NONCACHE_OFFSET); + case 0x1f2: return (void *)(0x0c012002 | NONCACHE_OFFSET); + case 0x1f3: return (void *)(0x0c012802 | NONCACHE_OFFSET); + case 0x1f4: return (void *)(0x0c012004 | NONCACHE_OFFSET); + case 0x1f5: return (void *)(0x0c012804 | NONCACHE_OFFSET); + case 0x1f6: return (void *)(0x0c012006 | NONCACHE_OFFSET); + case 0x1f7: return (void *)(0x0c012806 | NONCACHE_OFFSET); + case 0x3f6: return (void *)(0x0c01200e | NONCACHE_OFFSET); + default: return (void *)&dummy_reg; + } +} +#endif + +/* + * OPSPUT-LAN is located in the extended bus space + * from 0x10000000 to 0x13ffffff on physical address. + * The base address of LAN controller(LAN91C111) is 0x300. + */ +#define LAN_IOSTART (0x300 | NONCACHE_OFFSET) +#define LAN_IOEND (0x320 | NONCACHE_OFFSET) +static inline void *_port2addr_ne(unsigned long port) +{ + return (void *)(port + 0x10000000); +} +static inline void *_port2addr_usb(unsigned long port) +{ + return (void *)((port & 0x0f) + NONCACHE_OFFSET + 0x10303000); +} + +static inline void delay(void) +{ + __asm__ __volatile__ ("push r0; \n\t pop r0;" : : :"memory"); +} + +/* + * NIC I/O function + */ + +#define PORT2ADDR_NE(port) _port2addr_ne(port) + +static inline unsigned char _ne_inb(void *portp) +{ + return *(volatile unsigned char *)portp; +} + +static inline unsigned short _ne_inw(void *portp) +{ + return (unsigned short)le16_to_cpu(*(volatile unsigned short *)portp); +} + +static inline void _ne_insb(void *portp, void *addr, unsigned long count) +{ + unsigned char *buf = (unsigned char *)addr; + + while (count--) + *buf++ = _ne_inb(portp); +} + +static inline void _ne_outb(unsigned char b, void *portp) +{ + *(volatile unsigned char *)portp = b; +} + +static inline void _ne_outw(unsigned short w, void *portp) +{ + *(volatile unsigned short *)portp = cpu_to_le16(w); +} + +unsigned char _inb(unsigned long port) +{ + if (port >= LAN_IOSTART && port < LAN_IOEND) + return _ne_inb(PORT2ADDR_NE(port)); + +#if defined(CONFIG_IDE) && !defined(CONFIG_M32R_CFC) + else if ((port >= 0x1f0 && port <=0x1f7) || port == 0x3f6) { + return *(volatile unsigned char *)__port2addr_ata(port); + } +#endif +#if defined(CONFIG_PCMCIA) && defined(CONFIG_M32R_CFC) + else if (port >= M32R_PCC_IOSTART0 && port <= M32R_PCC_IOEND0) { + unsigned char b; + pcc_ioread_byte(0, port, &b, sizeof(b), 1, 0); + return b; + } else +#endif + + return *(volatile unsigned char *)PORT2ADDR(port); +} + +unsigned short _inw(unsigned long port) +{ + if (port >= LAN_IOSTART && port < LAN_IOEND) + return _ne_inw(PORT2ADDR_NE(port)); +#if defined(CONFIG_IDE) && !defined(CONFIG_M32R_CFC) + else if ((port >= 0x1f0 && port <=0x1f7) || port == 0x3f6) { + return *(volatile unsigned short *)__port2addr_ata(port); + } +#endif +#if defined(CONFIG_USB) + else if(port >= 0x340 && port < 0x3a0) + return *(volatile unsigned short *)PORT2ADDR_USB(port); +#endif +#if defined(CONFIG_PCMCIA) && defined(CONFIG_M32R_CFC) + else if (port >= M32R_PCC_IOSTART0 && port <= M32R_PCC_IOEND0) { + unsigned short w; + pcc_ioread_word(0, port, &w, sizeof(w), 1, 0); + return w; + } else +#endif + return *(volatile unsigned short *)PORT2ADDR(port); +} + +unsigned long _inl(unsigned long port) +{ +#if defined(CONFIG_PCMCIA) && defined(CONFIG_M32R_CFC) + if (port >= M32R_PCC_IOSTART0 && port <= M32R_PCC_IOEND0) { + unsigned long l; + pcc_ioread_word(0, port, &l, sizeof(l), 1, 0); + return l; + } else +#endif + return *(volatile unsigned long *)PORT2ADDR(port); +} + +unsigned char _inb_p(unsigned long port) +{ + unsigned char v = _inb(port); + delay(); + return (v); +} + +unsigned short _inw_p(unsigned long port) +{ + unsigned short v = _inw(port); + delay(); + return (v); +} + +unsigned long _inl_p(unsigned long port) +{ + unsigned long v = _inl(port); + delay(); + return (v); +} + +void _outb(unsigned char b, unsigned long port) +{ + if (port >= LAN_IOSTART && port < LAN_IOEND) + _ne_outb(b, PORT2ADDR_NE(port)); + else +#if defined(CONFIG_IDE) && !defined(CONFIG_M32R_CFC) + if ((port >= 0x1f0 && port <=0x1f7) || port == 0x3f6) { + *(volatile unsigned char *)__port2addr_ata(port) = b; + } else +#endif +#if defined(CONFIG_PCMCIA) && defined(CONFIG_M32R_CFC) + if (port >= M32R_PCC_IOSTART0 && port <= M32R_PCC_IOEND0) { + pcc_iowrite_byte(0, port, &b, sizeof(b), 1, 0); + } else +#endif + *(volatile unsigned char *)PORT2ADDR(port) = b; +} + +void _outw(unsigned short w, unsigned long port) +{ + if (port >= LAN_IOSTART && port < LAN_IOEND) + _ne_outw(w, PORT2ADDR_NE(port)); + else +#if defined(CONFIG_IDE) && !defined(CONFIG_M32R_CFC) + if ((port >= 0x1f0 && port <=0x1f7) || port == 0x3f6) { + *(volatile unsigned short *)__port2addr_ata(port) = w; + } else +#endif +#if defined(CONFIG_USB) + if(port >= 0x340 && port < 0x3a0) + *(volatile unsigned short *)PORT2ADDR_USB(port) = w; + else +#endif +#if defined(CONFIG_PCMCIA) && defined(CONFIG_M32R_CFC) + if (port >= M32R_PCC_IOSTART0 && port <= M32R_PCC_IOEND0) { + pcc_iowrite_word(0, port, &w, sizeof(w), 1, 0); + } else +#endif + *(volatile unsigned short *)PORT2ADDR(port) = w; +} + +void _outl(unsigned long l, unsigned long port) +{ +#if defined(CONFIG_PCMCIA) && defined(CONFIG_M32R_CFC) + if (port >= M32R_PCC_IOSTART0 && port <= M32R_PCC_IOEND0) { + pcc_iowrite_word(0, port, &l, sizeof(l), 1, 0); + } else +#endif + *(volatile unsigned long *)PORT2ADDR(port) = l; +} + +void _outb_p(unsigned char b, unsigned long port) +{ + _outb(b, port); + delay(); +} + +void _outw_p(unsigned short w, unsigned long port) +{ + _outw(w, port); + delay(); +} + +void _outl_p(unsigned long l, unsigned long port) +{ + _outl(l, port); + delay(); +} + +void _insb(unsigned int port, void *addr, unsigned long count) +{ + if (port >= LAN_IOSTART && port < LAN_IOEND) + _ne_insb(PORT2ADDR_NE(port), addr, count); +#if defined(CONFIG_IDE) && !defined(CONFIG_M32R_CFC) + else if ((port >= 0x1f0 && port <=0x1f7) || port == 0x3f6) { + unsigned char *buf = addr; + unsigned char *portp = __port2addr_ata(port); + while (count--) + *buf++ = *(volatile unsigned char *)portp; + } +#endif +#if defined(CONFIG_PCMCIA) && defined(CONFIG_M32R_CFC) + else if (port >= M32R_PCC_IOSTART0 && port <= M32R_PCC_IOEND0) { + pcc_ioread_byte(0, port, (void *)addr, sizeof(unsigned char), + count, 1); + } +#endif + else { + unsigned char *buf = addr; + unsigned char *portp = PORT2ADDR(port); + while (count--) + *buf++ = *(volatile unsigned char *)portp; + } +} + +void _insw(unsigned int port, void *addr, unsigned long count) +{ + unsigned short *buf = addr; + unsigned short *portp; + + if (port >= LAN_IOSTART && port < LAN_IOEND) { + /* + * This portion is only used by smc91111.c to read data + * from the DATA_REG. Do not swap the data. + */ + portp = PORT2ADDR_NE(port); + while (count--) + *buf++ = *(volatile unsigned short *)portp; +#if defined(CONFIG_PCMCIA) && defined(CONFIG_M32R_CFC) + } else if (port >= M32R_PCC_IOSTART0 && port <= M32R_PCC_IOEND0) { + pcc_ioread_word(9, port, (void *)addr, sizeof(unsigned short), + count, 1); +#endif +#if defined(CONFIG_IDE) && !defined(CONFIG_M32R_CFC) + } else if ((port >= 0x1f0 && port <=0x1f7) || port == 0x3f6) { + portp = __port2addr_ata(port); + while (count--) + *buf++ = *(volatile unsigned short *)portp; +#endif + } else { + portp = PORT2ADDR(port); + while (count--) + *buf++ = *(volatile unsigned short *)portp; + } +} + +void _insl(unsigned int port, void *addr, unsigned long count) +{ + unsigned long *buf = addr; + unsigned long *portp; + + portp = PORT2ADDR(port); + while (count--) + *buf++ = *(volatile unsigned long *)portp; +} + +void _outsb(unsigned int port, const void *addr, unsigned long count) +{ + const unsigned char *buf = addr; + unsigned char *portp; + + if (port >= LAN_IOSTART && port < LAN_IOEND) { + portp = PORT2ADDR_NE(port); + while (count--) + _ne_outb(*buf++, portp); +#if defined(CONFIG_IDE) && !defined(CONFIG_M32R_CFC) + } else if ((port >= 0x1f0 && port <=0x1f7) || port == 0x3f6) { + portp = __port2addr_ata(port); + while (count--) + *(volatile unsigned char *)portp = *buf++; +#endif +#if defined(CONFIG_PCMCIA) && defined(CONFIG_M32R_CFC) + } else if (port >= M32R_PCC_IOSTART0 && port <= M32R_PCC_IOEND0) { + pcc_iowrite_byte(0, port, (void *)addr, sizeof(unsigned char), + count, 1); +#endif + } else { + portp = PORT2ADDR(port); + while (count--) + *(volatile unsigned char *)portp = *buf++; + } +} + +void _outsw(unsigned int port, const void *addr, unsigned long count) +{ + const unsigned short *buf = addr; + unsigned short *portp; + + if (port >= LAN_IOSTART && port < LAN_IOEND) { + /* + * This portion is only used by smc91111.c to write data + * into the DATA_REG. Do not swap the data. + */ + portp = PORT2ADDR_NE(port); + while (count--) + *(volatile unsigned short *)portp = *buf++; +#if defined(CONFIG_IDE) && !defined(CONFIG_M32R_CFC) + } else if ((port >= 0x1f0 && port <=0x1f7) || port == 0x3f6) { + portp = __port2addr_ata(port); + while (count--) + *(volatile unsigned short *)portp = *buf++; +#endif +#if defined(CONFIG_PCMCIA) && defined(CONFIG_M32R_CFC) + } else if (port >= M32R_PCC_IOSTART0 && port <= M32R_PCC_IOEND0) { + pcc_iowrite_word(9, port, (void *)addr, sizeof(unsigned short), + count, 1); +#endif + } else { + portp = PORT2ADDR(port); + while (count--) + *(volatile unsigned short *)portp = *buf++; + } +} + +void _outsl(unsigned int port, const void *addr, unsigned long count) +{ + const unsigned long *buf = addr; + unsigned char *portp; + + portp = PORT2ADDR(port); + while (count--) + *(volatile unsigned long *)portp = *buf++; +} diff --git a/arch/m32r/platforms/opsput/setup.c b/arch/m32r/platforms/opsput/setup.c new file mode 100644 index 000000000..cd0170483 --- /dev/null +++ b/arch/m32r/platforms/opsput/setup.c @@ -0,0 +1,448 @@ +/* + * linux/arch/m32r/platforms/opsput/setup.c + * + * Setup routines for Renesas OPSPUT Board + * + * Copyright (c) 2002-2005 + * Hiroyuki Kondo, Hirokazu Takata, + * Hitoshi Yamamoto, Takeo Takahashi, Mamoru Sakugawa + * + * This file is subject to the terms and conditions of the GNU General + * Public License. See the file "COPYING" in the main directory of this + * archive for more details. + */ + +#include <linux/irq.h> +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/platform_device.h> + +#include <asm/m32r.h> +#include <asm/io.h> + +/* + * OPSP Interrupt Control Unit (Level 1) + */ +#define irq2port(x) (M32R_ICU_CR1_PORTL + ((x - 1) * sizeof(unsigned long))) + +icu_data_t icu_data[OPSPUT_NUM_CPU_IRQ]; + +static void disable_opsput_irq(unsigned int irq) +{ + unsigned long port, data; + + port = irq2port(irq); + data = icu_data[irq].icucr|M32R_ICUCR_ILEVEL7; + outl(data, port); +} + +static void enable_opsput_irq(unsigned int irq) +{ + unsigned long port, data; + + port = irq2port(irq); + data = icu_data[irq].icucr|M32R_ICUCR_IEN|M32R_ICUCR_ILEVEL6; + outl(data, port); +} + +static void mask_opsput(struct irq_data *data) +{ + disable_opsput_irq(data->irq); +} + +static void unmask_opsput(struct irq_data *data) +{ + enable_opsput_irq(data->irq); +} + +static void shutdown_opsput(struct irq_data *data) +{ + unsigned long port; + + port = irq2port(data->irq); + outl(M32R_ICUCR_ILEVEL7, port); +} + +static struct irq_chip opsput_irq_type = +{ + .name = "OPSPUT-IRQ", + .irq_shutdown = shutdown_opsput, + .irq_mask = mask_opsput, + .irq_unmask = unmask_opsput, +}; + +/* + * Interrupt Control Unit of PLD on OPSPUT (Level 2) + */ +#define irq2pldirq(x) ((x) - OPSPUT_PLD_IRQ_BASE) +#define pldirq2port(x) (unsigned long)((int)PLD_ICUCR1 + \ + (((x) - 1) * sizeof(unsigned short))) + +typedef struct { + unsigned short icucr; /* ICU Control Register */ +} pld_icu_data_t; + +static pld_icu_data_t pld_icu_data[OPSPUT_NUM_PLD_IRQ]; + +static void disable_opsput_pld_irq(unsigned int irq) +{ + unsigned long port, data; + unsigned int pldirq; + + pldirq = irq2pldirq(irq); + port = pldirq2port(pldirq); + data = pld_icu_data[pldirq].icucr|PLD_ICUCR_ILEVEL7; + outw(data, port); +} + +static void enable_opsput_pld_irq(unsigned int irq) +{ + unsigned long port, data; + unsigned int pldirq; + + pldirq = irq2pldirq(irq); + port = pldirq2port(pldirq); + data = pld_icu_data[pldirq].icucr|PLD_ICUCR_IEN|PLD_ICUCR_ILEVEL6; + outw(data, port); +} + +static void mask_opsput_pld(struct irq_data *data) +{ + disable_opsput_pld_irq(data->irq); +} + +static void unmask_opsput_pld(struct irq_data *data) +{ + enable_opsput_pld_irq(data->irq); + enable_opsput_irq(M32R_IRQ_INT1); +} + +static void shutdown_opsput_pld(struct irq_data *data) +{ + unsigned long port; + unsigned int pldirq; + + pldirq = irq2pldirq(data->irq); + port = pldirq2port(pldirq); + outw(PLD_ICUCR_ILEVEL7, port); +} + +static struct irq_chip opsput_pld_irq_type = +{ + .name = "OPSPUT-PLD-IRQ", + .irq_shutdown = shutdown_opsput_pld, + .irq_mask = mask_opsput_pld, + .irq_unmask = unmask_opsput_pld, +}; + +/* + * Interrupt Control Unit of PLD on OPSPUT-LAN (Level 2) + */ +#define irq2lanpldirq(x) ((x) - OPSPUT_LAN_PLD_IRQ_BASE) +#define lanpldirq2port(x) (unsigned long)((int)OPSPUT_LAN_ICUCR1 + \ + (((x) - 1) * sizeof(unsigned short))) + +static pld_icu_data_t lanpld_icu_data[OPSPUT_NUM_LAN_PLD_IRQ]; + +static void disable_opsput_lanpld_irq(unsigned int irq) +{ + unsigned long port, data; + unsigned int pldirq; + + pldirq = irq2lanpldirq(irq); + port = lanpldirq2port(pldirq); + data = lanpld_icu_data[pldirq].icucr|PLD_ICUCR_ILEVEL7; + outw(data, port); +} + +static void enable_opsput_lanpld_irq(unsigned int irq) +{ + unsigned long port, data; + unsigned int pldirq; + + pldirq = irq2lanpldirq(irq); + port = lanpldirq2port(pldirq); + data = lanpld_icu_data[pldirq].icucr|PLD_ICUCR_IEN|PLD_ICUCR_ILEVEL6; + outw(data, port); +} + +static void mask_opsput_lanpld(struct irq_data *data) +{ + disable_opsput_lanpld_irq(data->irq); +} + +static void unmask_opsput_lanpld(struct irq_data *data) +{ + enable_opsput_lanpld_irq(data->irq); + enable_opsput_irq(M32R_IRQ_INT0); +} + +static void shutdown_opsput_lanpld(struct irq_data *data) +{ + unsigned long port; + unsigned int pldirq; + + pldirq = irq2lanpldirq(data->irq); + port = lanpldirq2port(pldirq); + outw(PLD_ICUCR_ILEVEL7, port); +} + +static struct irq_chip opsput_lanpld_irq_type = +{ + .name = "OPSPUT-PLD-LAN-IRQ", + .irq_shutdown = shutdown_opsput_lanpld, + .irq_mask = mask_opsput_lanpld, + .irq_unmask = unmask_opsput_lanpld, +}; + +/* + * Interrupt Control Unit of PLD on OPSPUT-LCD (Level 2) + */ +#define irq2lcdpldirq(x) ((x) - OPSPUT_LCD_PLD_IRQ_BASE) +#define lcdpldirq2port(x) (unsigned long)((int)OPSPUT_LCD_ICUCR1 + \ + (((x) - 1) * sizeof(unsigned short))) + +static pld_icu_data_t lcdpld_icu_data[OPSPUT_NUM_LCD_PLD_IRQ]; + +static void disable_opsput_lcdpld_irq(unsigned int irq) +{ + unsigned long port, data; + unsigned int pldirq; + + pldirq = irq2lcdpldirq(irq); + port = lcdpldirq2port(pldirq); + data = lcdpld_icu_data[pldirq].icucr|PLD_ICUCR_ILEVEL7; + outw(data, port); +} + +static void enable_opsput_lcdpld_irq(unsigned int irq) +{ + unsigned long port, data; + unsigned int pldirq; + + pldirq = irq2lcdpldirq(irq); + port = lcdpldirq2port(pldirq); + data = lcdpld_icu_data[pldirq].icucr|PLD_ICUCR_IEN|PLD_ICUCR_ILEVEL6; + outw(data, port); +} + +static void mask_opsput_lcdpld(struct irq_data *data) +{ + disable_opsput_lcdpld_irq(data->irq); +} + +static void unmask_opsput_lcdpld(struct irq_data *data) +{ + enable_opsput_lcdpld_irq(data->irq); + enable_opsput_irq(M32R_IRQ_INT2); +} + +static void shutdown_opsput_lcdpld(struct irq_data *data) +{ + unsigned long port; + unsigned int pldirq; + + pldirq = irq2lcdpldirq(data->irq); + port = lcdpldirq2port(pldirq); + outw(PLD_ICUCR_ILEVEL7, port); +} + +static struct irq_chip opsput_lcdpld_irq_type = { + .name = "OPSPUT-PLD-LCD-IRQ", + .irq_shutdown = shutdown_opsput_lcdpld, + .irq_mask = mask_opsput_lcdpld, + .irq_unmask = unmask_opsput_lcdpld, +}; + +void __init init_IRQ(void) +{ +#if defined(CONFIG_SMC91X) + /* INT#0: LAN controller on OPSPUT-LAN (SMC91C111)*/ + irq_set_chip_and_handler(OPSPUT_LAN_IRQ_LAN, &opsput_lanpld_irq_type, + handle_level_irq); + lanpld_icu_data[irq2lanpldirq(OPSPUT_LAN_IRQ_LAN)].icucr = PLD_ICUCR_IEN|PLD_ICUCR_ISMOD02; /* "H" edge sense */ + disable_opsput_lanpld_irq(OPSPUT_LAN_IRQ_LAN); +#endif /* CONFIG_SMC91X */ + + /* MFT2 : system timer */ + irq_set_chip_and_handler(M32R_IRQ_MFT2, &opsput_irq_type, + handle_level_irq); + icu_data[M32R_IRQ_MFT2].icucr = M32R_ICUCR_IEN; + disable_opsput_irq(M32R_IRQ_MFT2); + + /* SIO0 : receive */ + irq_set_chip_and_handler(M32R_IRQ_SIO0_R, &opsput_irq_type, + handle_level_irq); + icu_data[M32R_IRQ_SIO0_R].icucr = 0; + disable_opsput_irq(M32R_IRQ_SIO0_R); + + /* SIO0 : send */ + irq_set_chip_and_handler(M32R_IRQ_SIO0_S, &opsput_irq_type, + handle_level_irq); + icu_data[M32R_IRQ_SIO0_S].icucr = 0; + disable_opsput_irq(M32R_IRQ_SIO0_S); + + /* SIO1 : receive */ + irq_set_chip_and_handler(M32R_IRQ_SIO1_R, &opsput_irq_type, + handle_level_irq); + icu_data[M32R_IRQ_SIO1_R].icucr = 0; + disable_opsput_irq(M32R_IRQ_SIO1_R); + + /* SIO1 : send */ + irq_set_chip_and_handler(M32R_IRQ_SIO1_S, &opsput_irq_type, + handle_level_irq); + icu_data[M32R_IRQ_SIO1_S].icucr = 0; + disable_opsput_irq(M32R_IRQ_SIO1_S); + + /* DMA1 : */ + irq_set_chip_and_handler(M32R_IRQ_DMA1, &opsput_irq_type, + handle_level_irq); + icu_data[M32R_IRQ_DMA1].icucr = 0; + disable_opsput_irq(M32R_IRQ_DMA1); + +#ifdef CONFIG_SERIAL_M32R_PLDSIO + /* INT#1: SIO0 Receive on PLD */ + irq_set_chip_and_handler(PLD_IRQ_SIO0_RCV, &opsput_pld_irq_type, + handle_level_irq); + pld_icu_data[irq2pldirq(PLD_IRQ_SIO0_RCV)].icucr = PLD_ICUCR_IEN|PLD_ICUCR_ISMOD03; + disable_opsput_pld_irq(PLD_IRQ_SIO0_RCV); + + /* INT#1: SIO0 Send on PLD */ + irq_set_chip_and_handler(PLD_IRQ_SIO0_SND, &opsput_pld_irq_type, + handle_level_irq); + pld_icu_data[irq2pldirq(PLD_IRQ_SIO0_SND)].icucr = PLD_ICUCR_IEN|PLD_ICUCR_ISMOD03; + disable_opsput_pld_irq(PLD_IRQ_SIO0_SND); +#endif /* CONFIG_SERIAL_M32R_PLDSIO */ + + /* INT#1: CFC IREQ on PLD */ + irq_set_chip_and_handler(PLD_IRQ_CFIREQ, &opsput_pld_irq_type, + handle_level_irq); + pld_icu_data[irq2pldirq(PLD_IRQ_CFIREQ)].icucr = PLD_ICUCR_IEN|PLD_ICUCR_ISMOD01; /* 'L' level sense */ + disable_opsput_pld_irq(PLD_IRQ_CFIREQ); + + /* INT#1: CFC Insert on PLD */ + irq_set_chip_and_handler(PLD_IRQ_CFC_INSERT, &opsput_pld_irq_type, + handle_level_irq); + pld_icu_data[irq2pldirq(PLD_IRQ_CFC_INSERT)].icucr = PLD_ICUCR_IEN|PLD_ICUCR_ISMOD00; /* 'L' edge sense */ + disable_opsput_pld_irq(PLD_IRQ_CFC_INSERT); + + /* INT#1: CFC Eject on PLD */ + irq_set_chip_and_handler(PLD_IRQ_CFC_EJECT, &opsput_pld_irq_type, + handle_level_irq); + pld_icu_data[irq2pldirq(PLD_IRQ_CFC_EJECT)].icucr = PLD_ICUCR_IEN|PLD_ICUCR_ISMOD02; /* 'H' edge sense */ + disable_opsput_pld_irq(PLD_IRQ_CFC_EJECT); + + /* + * INT0# is used for LAN, DIO + * We enable it here. + */ + icu_data[M32R_IRQ_INT0].icucr = M32R_ICUCR_IEN|M32R_ICUCR_ISMOD11; + enable_opsput_irq(M32R_IRQ_INT0); + + /* + * INT1# is used for UART, MMC, CF Controller in FPGA. + * We enable it here. + */ + icu_data[M32R_IRQ_INT1].icucr = M32R_ICUCR_IEN|M32R_ICUCR_ISMOD11; + enable_opsput_irq(M32R_IRQ_INT1); + +#if defined(CONFIG_USB) + outw(USBCR_OTGS, USBCR); /* USBCR: non-OTG */ + irq_set_chip_and_handler(OPSPUT_LCD_IRQ_USB_INT1, + &opsput_lcdpld_irq_type, handle_level_irq); + lcdpld_icu_data[irq2lcdpldirq(OPSPUT_LCD_IRQ_USB_INT1)].icucr = PLD_ICUCR_IEN|PLD_ICUCR_ISMOD01; /* "L" level sense */ + disable_opsput_lcdpld_irq(OPSPUT_LCD_IRQ_USB_INT1); +#endif + /* + * INT2# is used for BAT, USB, AUDIO + * We enable it here. + */ + icu_data[M32R_IRQ_INT2].icucr = M32R_ICUCR_IEN|M32R_ICUCR_ISMOD01; + enable_opsput_irq(M32R_IRQ_INT2); + +#if defined(CONFIG_VIDEO_M32R_AR) + /* + * INT3# is used for AR + */ + irq_set_chip_and_handler(M32R_IRQ_INT3, &opsput_irq_type, + handle_level_irq); + icu_data[M32R_IRQ_INT3].icucr = M32R_ICUCR_IEN|M32R_ICUCR_ISMOD10; + disable_opsput_irq(M32R_IRQ_INT3); +#endif /* CONFIG_VIDEO_M32R_AR */ +} + +#if defined(CONFIG_SMC91X) + +#define LAN_IOSTART 0x300 +#define LAN_IOEND 0x320 +static struct resource smc91x_resources[] = { + [0] = { + .start = (LAN_IOSTART), + .end = (LAN_IOEND), + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = OPSPUT_LAN_IRQ_LAN, + .end = OPSPUT_LAN_IRQ_LAN, + .flags = IORESOURCE_IRQ, + } +}; + +static struct platform_device smc91x_device = { + .name = "smc91x", + .id = 0, + .num_resources = ARRAY_SIZE(smc91x_resources), + .resource = smc91x_resources, +}; +#endif + +#if defined(CONFIG_FB_S1D13XXX) + +#include <video/s1d13xxxfb.h> +#include <asm/s1d13806.h> + +static struct s1d13xxxfb_pdata s1d13xxxfb_data = { + .initregs = s1d13xxxfb_initregs, + .initregssize = ARRAY_SIZE(s1d13xxxfb_initregs), + .platform_init_video = NULL, +#ifdef CONFIG_PM + .platform_suspend_video = NULL, + .platform_resume_video = NULL, +#endif +}; + +static struct resource s1d13xxxfb_resources[] = { + [0] = { + .start = 0x10600000UL, + .end = 0x1073FFFFUL, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = 0x10400000UL, + .end = 0x104001FFUL, + .flags = IORESOURCE_MEM, + } +}; + +static struct platform_device s1d13xxxfb_device = { + .name = S1D_DEVICENAME, + .id = 0, + .dev = { + .platform_data = &s1d13xxxfb_data, + }, + .num_resources = ARRAY_SIZE(s1d13xxxfb_resources), + .resource = s1d13xxxfb_resources, +}; +#endif + +static int __init platform_init(void) +{ +#if defined(CONFIG_SMC91X) + platform_device_register(&smc91x_device); +#endif +#if defined(CONFIG_FB_S1D13XXX) + platform_device_register(&s1d13xxxfb_device); +#endif + return 0; +} +arch_initcall(platform_init); diff --git a/arch/m32r/platforms/usrv/Makefile b/arch/m32r/platforms/usrv/Makefile new file mode 100644 index 000000000..0de59084f --- /dev/null +++ b/arch/m32r/platforms/usrv/Makefile @@ -0,0 +1 @@ +obj-y := setup.o io.o diff --git a/arch/m32r/platforms/usrv/io.c b/arch/m32r/platforms/usrv/io.c new file mode 100644 index 000000000..f5e50d37b --- /dev/null +++ b/arch/m32r/platforms/usrv/io.c @@ -0,0 +1,225 @@ +/* + * linux/arch/m32r/platforms/usrv/io.c + * + * Typical I/O routines for uServer board. + * + * Copyright (c) 2001-2005 Hiroyuki Kondo, Hirokazu Takata, + * Hitoshi Yamamoto, Takeo Takahashi + * + * This file is subject to the terms and conditions of the GNU General + * Public License. See the file "COPYING" in the main directory of this + * archive for more details. + * + */ + +#include <asm/m32r.h> +#include <asm/page.h> +#include <asm/io.h> + +#include <linux/types.h> +#include "../../../../drivers/pcmcia/m32r_cfc.h" + +extern void pcc_ioread_byte(int, unsigned long, void *, size_t, size_t, int); +extern void pcc_ioread_word(int, unsigned long, void *, size_t, size_t, int); +extern void pcc_iowrite_byte(int, unsigned long, void *, size_t, size_t, int); +extern void pcc_iowrite_word(int, unsigned long, void *, size_t, size_t, int); +#define CFC_IOSTART CFC_IOPORT_BASE +#define CFC_IOEND (CFC_IOSTART + (M32R_PCC_MAPSIZE * M32R_MAX_PCC) - 1) + +#if defined(CONFIG_SERIAL_8250) || defined(CONFIG_SERIAL_8250_MODULE) +#define UART0_REGSTART 0x04c20000 +#define UART1_REGSTART 0x04c20100 +#define UART_IOMAP_SIZE 8 +#define UART0_IOSTART 0x3f8 +#define UART0_IOEND (UART0_IOSTART + UART_IOMAP_SIZE - 1) +#define UART1_IOSTART 0x2f8 +#define UART1_IOEND (UART1_IOSTART + UART_IOMAP_SIZE - 1) +#endif /* CONFIG_SERIAL_8250 || CONFIG_SERIAL_8250_MODULE */ + +#define PORT2ADDR(port) _port2addr(port) + +static inline void *_port2addr(unsigned long port) +{ +#if defined(CONFIG_SERIAL_8250) || defined(CONFIG_SERIAL_8250_MODULE) + if (port >= UART0_IOSTART && port <= UART0_IOEND) + port = ((port - UART0_IOSTART) << 1) + UART0_REGSTART; + else if (port >= UART1_IOSTART && port <= UART1_IOEND) + port = ((port - UART1_IOSTART) << 1) + UART1_REGSTART; +#endif /* CONFIG_SERIAL_8250 || CONFIG_SERIAL_8250_MODULE */ + return (void *)(port | (NONCACHE_OFFSET)); +} + +static inline void delay(void) +{ + __asm__ __volatile__ ("push r0; \n\t pop r0;" : : :"memory"); +} + +unsigned char _inb(unsigned long port) +{ + if (port >= CFC_IOSTART && port <= CFC_IOEND) { + unsigned char b; + pcc_ioread_byte(0, port, &b, sizeof(b), 1, 0); + return b; + } else + return *(volatile unsigned char *)PORT2ADDR(port); +} + +unsigned short _inw(unsigned long port) +{ + if (port >= CFC_IOSTART && port <= CFC_IOEND) { + unsigned short w; + pcc_ioread_word(0, port, &w, sizeof(w), 1, 0); + return w; + } else + return *(volatile unsigned short *)PORT2ADDR(port); +} + +unsigned long _inl(unsigned long port) +{ + if (port >= CFC_IOSTART && port <= CFC_IOEND) { + unsigned long l; + pcc_ioread_word(0, port, &l, sizeof(l), 1, 0); + return l; + } else + return *(volatile unsigned long *)PORT2ADDR(port); +} + +unsigned char _inb_p(unsigned long port) +{ + unsigned char v = _inb(port); + delay(); + return v; +} + +unsigned short _inw_p(unsigned long port) +{ + unsigned short v = _inw(port); + delay(); + return v; +} + +unsigned long _inl_p(unsigned long port) +{ + unsigned long v = _inl(port); + delay(); + return v; +} + +void _outb(unsigned char b, unsigned long port) +{ + if (port >= CFC_IOSTART && port <= CFC_IOEND) + pcc_iowrite_byte(0, port, &b, sizeof(b), 1, 0); + else + *(volatile unsigned char *)PORT2ADDR(port) = b; +} + +void _outw(unsigned short w, unsigned long port) +{ + if (port >= CFC_IOSTART && port <= CFC_IOEND) + pcc_iowrite_word(0, port, &w, sizeof(w), 1, 0); + else + *(volatile unsigned short *)PORT2ADDR(port) = w; +} + +void _outl(unsigned long l, unsigned long port) +{ + if (port >= CFC_IOSTART && port <= CFC_IOEND) + pcc_iowrite_word(0, port, &l, sizeof(l), 1, 0); + else + *(volatile unsigned long *)PORT2ADDR(port) = l; +} + +void _outb_p(unsigned char b, unsigned long port) +{ + _outb(b, port); + delay(); +} + +void _outw_p(unsigned short w, unsigned long port) +{ + _outw(w, port); + delay(); +} + +void _outl_p(unsigned long l, unsigned long port) +{ + _outl(l, port); + delay(); +} + +void _insb(unsigned int port, void * addr, unsigned long count) +{ + if (port >= CFC_IOSTART && port <= CFC_IOEND) + pcc_ioread_byte(0, port, addr, sizeof(unsigned char), count, 1); + else { + unsigned char *buf = addr; + unsigned char *portp = PORT2ADDR(port); + while (count--) + *buf++ = *(volatile unsigned char *)portp; + } +} + +void _insw(unsigned int port, void * addr, unsigned long count) +{ + unsigned short *buf = addr; + unsigned short *portp; + + if (port >= CFC_IOSTART && port <= CFC_IOEND) + pcc_ioread_word(0, port, addr, sizeof(unsigned short), count, + 1); + else { + portp = PORT2ADDR(port); + while (count--) + *buf++ = *(volatile unsigned short *)portp; + } +} + +void _insl(unsigned int port, void * addr, unsigned long count) +{ + unsigned long *buf = addr; + unsigned long *portp; + + portp = PORT2ADDR(port); + while (count--) + *buf++ = *(volatile unsigned long *)portp; +} + +void _outsb(unsigned int port, const void * addr, unsigned long count) +{ + const unsigned char *buf = addr; + unsigned char *portp; + + if (port >= CFC_IOSTART && port <= CFC_IOEND) + pcc_iowrite_byte(0, port, (void *)addr, sizeof(unsigned char), + count, 1); + else { + portp = PORT2ADDR(port); + while (count--) + *(volatile unsigned char *)portp = *buf++; + } +} + +void _outsw(unsigned int port, const void * addr, unsigned long count) +{ + const unsigned short *buf = addr; + unsigned short *portp; + + if (port >= CFC_IOSTART && port <= CFC_IOEND) + pcc_iowrite_word(0, port, (void *)addr, sizeof(unsigned short), + count, 1); + else { + portp = PORT2ADDR(port); + while (count--) + *(volatile unsigned short *)portp = *buf++; + } +} + +void _outsl(unsigned int port, const void * addr, unsigned long count) +{ + const unsigned long *buf = addr; + unsigned char *portp; + + portp = PORT2ADDR(port); + while (count--) + *(volatile unsigned long *)portp = *buf++; +} diff --git a/arch/m32r/platforms/usrv/setup.c b/arch/m32r/platforms/usrv/setup.c new file mode 100644 index 000000000..dcde0ec77 --- /dev/null +++ b/arch/m32r/platforms/usrv/setup.c @@ -0,0 +1,212 @@ +/* + * linux/arch/m32r/platforms/usrv/setup.c + * + * Setup routines for MITSUBISHI uServer + * + * Copyright (c) 2001, 2002, 2003 Hiroyuki Kondo, Hirokazu Takata, + * Hitoshi Yamamoto + */ + +#include <linux/irq.h> +#include <linux/kernel.h> +#include <linux/init.h> + +#include <asm/m32r.h> +#include <asm/io.h> + +#define irq2port(x) (M32R_ICU_CR1_PORTL + ((x - 1) * sizeof(unsigned long))) + +icu_data_t icu_data[M32700UT_NUM_CPU_IRQ]; + +static void disable_mappi_irq(unsigned int irq) +{ + unsigned long port, data; + + port = irq2port(irq); + data = icu_data[irq].icucr|M32R_ICUCR_ILEVEL7; + outl(data, port); +} + +static void enable_mappi_irq(unsigned int irq) +{ + unsigned long port, data; + + port = irq2port(irq); + data = icu_data[irq].icucr|M32R_ICUCR_IEN|M32R_ICUCR_ILEVEL6; + outl(data, port); +} + +static void mask_mappi(struct irq_data *data) +{ + disable_mappi_irq(data->irq); +} + +static void unmask_mappi(struct irq_data *data) +{ + enable_mappi_irq(data->irq); +} + +static void shutdown_mappi(struct irq_data *data) +{ + unsigned long port; + + port = irq2port(data->irq); + outl(M32R_ICUCR_ILEVEL7, port); +} + +static struct irq_chip mappi_irq_type = +{ + .name = "M32700-IRQ", + .irq_shutdown = shutdown_mappi, + .irq_mask = mask_mappi, + .irq_unmask = unmask_mappi, +}; + +/* + * Interrupt Control Unit of PLD on M32700UT (Level 2) + */ +#define irq2pldirq(x) ((x) - M32700UT_PLD_IRQ_BASE) +#define pldirq2port(x) (unsigned long)((int)PLD_ICUCR1 + \ + (((x) - 1) * sizeof(unsigned short))) + +typedef struct { + unsigned short icucr; /* ICU Control Register */ +} pld_icu_data_t; + +static pld_icu_data_t pld_icu_data[M32700UT_NUM_PLD_IRQ]; + +static void disable_m32700ut_pld_irq(unsigned int irq) +{ + unsigned long port, data; + unsigned int pldirq; + + pldirq = irq2pldirq(irq); + port = pldirq2port(pldirq); + data = pld_icu_data[pldirq].icucr|PLD_ICUCR_ILEVEL7; + outw(data, port); +} + +static void enable_m32700ut_pld_irq(unsigned int irq) +{ + unsigned long port, data; + unsigned int pldirq; + + pldirq = irq2pldirq(irq); + port = pldirq2port(pldirq); + data = pld_icu_data[pldirq].icucr|PLD_ICUCR_IEN|PLD_ICUCR_ILEVEL6; + outw(data, port); +} + +static void mask_m32700ut_pld(struct irq_data *data) +{ + disable_m32700ut_pld_irq(data->irq); +} + +static void unmask_m32700ut_pld(struct irq_data *data) +{ + enable_m32700ut_pld_irq(data->irq); + enable_mappi_irq(M32R_IRQ_INT1); +} + +static void shutdown_m32700ut_pld(struct irq_data *data) +{ + unsigned long port; + unsigned int pldirq; + + pldirq = irq2pldirq(data->irq); + port = pldirq2port(pldirq); + outw(PLD_ICUCR_ILEVEL7, port); +} + +static struct irq_chip m32700ut_pld_irq_type = +{ + .name = "USRV-PLD-IRQ", + .irq_shutdown = shutdown_m32700ut_pld, + .irq_mask = mask_m32700ut_pld, + .irq_unmask = unmask_m32700ut_pld, +}; + +void __init init_IRQ(void) +{ + static int once = 0; + int i; + + if (once) + return; + else + once++; + + /* MFT2 : system timer */ + irq_set_chip_and_handler(M32R_IRQ_MFT2, &mappi_irq_type, + handle_level_irq); + icu_data[M32R_IRQ_MFT2].icucr = M32R_ICUCR_IEN; + disable_mappi_irq(M32R_IRQ_MFT2); + +#if defined(CONFIG_SERIAL_M32R_SIO) + /* SIO0_R : uart receive data */ + irq_set_chip_and_handler(M32R_IRQ_SIO0_R, &mappi_irq_type, + handle_level_irq); + icu_data[M32R_IRQ_SIO0_R].icucr = 0; + disable_mappi_irq(M32R_IRQ_SIO0_R); + + /* SIO0_S : uart send data */ + irq_set_chip_and_handler(M32R_IRQ_SIO0_S, &mappi_irq_type, + handle_level_irq); + icu_data[M32R_IRQ_SIO0_S].icucr = 0; + disable_mappi_irq(M32R_IRQ_SIO0_S); + + /* SIO1_R : uart receive data */ + irq_set_chip_and_handler(M32R_IRQ_SIO1_R, &mappi_irq_type, + handle_level_irq); + icu_data[M32R_IRQ_SIO1_R].icucr = 0; + disable_mappi_irq(M32R_IRQ_SIO1_R); + + /* SIO1_S : uart send data */ + irq_set_chip_and_handler(M32R_IRQ_SIO1_S, &mappi_irq_type, + handle_level_irq); + icu_data[M32R_IRQ_SIO1_S].icucr = 0; + disable_mappi_irq(M32R_IRQ_SIO1_S); +#endif /* CONFIG_SERIAL_M32R_SIO */ + + /* INT#67-#71: CFC#0 IREQ on PLD */ + for (i = 0 ; i < CONFIG_M32R_CFC_NUM ; i++ ) { + irq_set_chip_and_handler(PLD_IRQ_CF0 + i, + &m32700ut_pld_irq_type, + handle_level_irq); + pld_icu_data[irq2pldirq(PLD_IRQ_CF0 + i)].icucr + = PLD_ICUCR_ISMOD01; /* 'L' level sense */ + disable_m32700ut_pld_irq(PLD_IRQ_CF0 + i); + } + +#if defined(CONFIG_SERIAL_8250) || defined(CONFIG_SERIAL_8250_MODULE) + /* INT#76: 16552D#0 IREQ on PLD */ + irq_set_chip_and_handler(PLD_IRQ_UART0, &m32700ut_pld_irq_type, + handle_level_irq); + pld_icu_data[irq2pldirq(PLD_IRQ_UART0)].icucr + = PLD_ICUCR_ISMOD03; /* 'H' level sense */ + disable_m32700ut_pld_irq(PLD_IRQ_UART0); + + /* INT#77: 16552D#1 IREQ on PLD */ + irq_set_chip_and_handler(PLD_IRQ_UART1, &m32700ut_pld_irq_type, + handle_level_irq); + pld_icu_data[irq2pldirq(PLD_IRQ_UART1)].icucr + = PLD_ICUCR_ISMOD03; /* 'H' level sense */ + disable_m32700ut_pld_irq(PLD_IRQ_UART1); +#endif /* CONFIG_SERIAL_8250 || CONFIG_SERIAL_8250_MODULE */ + +#if defined(CONFIG_IDC_AK4524) || defined(CONFIG_IDC_AK4524_MODULE) + /* INT#80: AK4524 IREQ on PLD */ + irq_set_chip_and_handler(PLD_IRQ_SNDINT, &m32700ut_pld_irq_type, + handle_level_irq); + pld_icu_data[irq2pldirq(PLD_IRQ_SNDINT)].icucr + = PLD_ICUCR_ISMOD01; /* 'L' level sense */ + disable_m32700ut_pld_irq(PLD_IRQ_SNDINT); +#endif /* CONFIG_IDC_AK4524 || CONFIG_IDC_AK4524_MODULE */ + + /* + * INT1# is used for UART, MMC, CF Controller in FPGA. + * We enable it here. + */ + icu_data[M32R_IRQ_INT1].icucr = M32R_ICUCR_ISMOD11; + enable_mappi_irq(M32R_IRQ_INT1); +} |