summaryrefslogtreecommitdiff
path: root/arch/m68k/68360/head-ram.S
diff options
context:
space:
mode:
Diffstat (limited to 'arch/m68k/68360/head-ram.S')
-rw-r--r--arch/m68k/68360/head-ram.S402
1 files changed, 402 insertions, 0 deletions
diff --git a/arch/m68k/68360/head-ram.S b/arch/m68k/68360/head-ram.S
new file mode 100644
index 000000000..62bc56f41
--- /dev/null
+++ b/arch/m68k/68360/head-ram.S
@@ -0,0 +1,402 @@
+/*
+ * head-ram.S - startup code for Motorola 68360
+ *
+ * Copyright 2001 (C) SED Systems, a Division of Calian Ltd.
+ * Based on: arch/m68knommu/platform/68328/pilot/crt0_rom.S
+ * Based on: arch/m68knommu/platform/68360/uCquicc/crt0_rom.S, 2.0.38.1.pre7
+ * uClinux Kernel
+ * Copyright (C) Michael Leslie <mleslie@lineo.com>
+ * Based on: arch/m68knommu/platform/68EZ328/ucsimm/crt0_rom.S
+ * Copyright (C) 1998 D. Jeff Dionne <jeff@uclinux.org>,
+ *
+ */
+#define ASSEMBLY
+
+.global _stext
+.global _start
+
+.global _rambase
+.global _ramvec
+.global _ramstart
+.global _ramend
+
+.global _quicc_base
+.global _periph_base
+
+#define RAMEND (CONFIG_RAMBASE + CONFIG_RAMSIZE)
+#define ROMEND (CONFIG_ROMBASE + CONFIG_ROMSIZE)
+
+#define REGB 0x1000
+#define PEPAR (_dprbase + REGB + 0x0016)
+#define GMR (_dprbase + REGB + 0x0040)
+#define OR0 (_dprbase + REGB + 0x0054)
+#define BR0 (_dprbase + REGB + 0x0050)
+#define OR1 (_dprbase + REGB + 0x0064)
+#define BR1 (_dprbase + REGB + 0x0060)
+#define OR4 (_dprbase + REGB + 0x0094)
+#define BR4 (_dprbase + REGB + 0x0090)
+#define OR6 (_dprbase + REGB + 0x00b4)
+#define BR6 (_dprbase + REGB + 0x00b0)
+#define OR7 (_dprbase + REGB + 0x00c4)
+#define BR7 (_dprbase + REGB + 0x00c0)
+
+#define MCR (_dprbase + REGB + 0x0000)
+#define AVR (_dprbase + REGB + 0x0008)
+
+#define SYPCR (_dprbase + REGB + 0x0022)
+
+#define PLLCR (_dprbase + REGB + 0x0010)
+#define CLKOCR (_dprbase + REGB + 0x000C)
+#define CDVCR (_dprbase + REGB + 0x0014)
+
+#define BKAR (_dprbase + REGB + 0x0030)
+#define BKCR (_dprbase + REGB + 0x0034)
+#define SWIV (_dprbase + REGB + 0x0023)
+#define PICR (_dprbase + REGB + 0x0026)
+#define PITR (_dprbase + REGB + 0x002A)
+
+/* Define for all memory configuration */
+#define MCU_SIM_GMR 0x00000000
+#define SIM_OR_MASK 0x0fffffff
+
+/* Defines for chip select zero - the flash */
+#define SIM_OR0_MASK 0x20000002
+#define SIM_BR0_MASK 0x00000001
+
+
+/* Defines for chip select one - the RAM */
+#define SIM_OR1_MASK 0x10000000
+#define SIM_BR1_MASK 0x00000001
+
+#define MCU_SIM_MBAR_ADRS 0x0003ff00
+#define MCU_SIM_MBAR_BA_MASK 0xfffff000
+#define MCU_SIM_MBAR_AS_MASK 0x00000001
+
+#define MCU_SIM_PEPAR 0x00B4
+
+#define MCU_DISABLE_INTRPTS 0x2700
+#define MCU_SIM_AVR 0x00
+
+#define MCU_SIM_MCR 0x00005cff
+
+#define MCU_SIM_CLKOCR 0x00
+#define MCU_SIM_PLLCR 0x8000
+#define MCU_SIM_CDVCR 0x0000
+
+#define MCU_SIM_SYPCR 0x0000
+#define MCU_SIM_SWIV 0x00
+#define MCU_SIM_PICR 0x0000
+#define MCU_SIM_PITR 0x0000
+
+
+#include <asm/m68360_regs.h>
+
+
+/*
+ * By the time this RAM specific code begins to execute, DPRAM
+ * and DRAM should already be mapped and accessible.
+ */
+
+ .text
+_start:
+_stext:
+ nop
+ ori.w #MCU_DISABLE_INTRPTS, %sr /* disable interrupts: */
+ /* We should not need to setup the boot stack the reset should do it. */
+ movea.l #RAMEND, %sp /*set up stack at the end of DRAM:*/
+
+set_mbar_register:
+ moveq.l #0x07, %d1 /* Setup MBAR */
+ movec %d1, %dfc
+
+ lea.l MCU_SIM_MBAR_ADRS, %a0
+ move.l #_dprbase, %d0
+ andi.l #MCU_SIM_MBAR_BA_MASK, %d0
+ ori.l #MCU_SIM_MBAR_AS_MASK, %d0
+ moves.l %d0, %a0@
+
+ moveq.l #0x05, %d1
+ movec.l %d1, %dfc
+
+ /* Now we can begin to access registers in DPRAM */
+
+set_sim_mcr:
+ /* Set Module Configuration Register */
+ move.l #MCU_SIM_MCR, MCR
+
+ /* to do: Determine cause of reset */
+
+ /*
+ * configure system clock MC68360 p. 6-40
+ * (value +1)*osc/128 = system clock
+ */
+set_sim_clock:
+ move.w #MCU_SIM_PLLCR, PLLCR
+ move.b #MCU_SIM_CLKOCR, CLKOCR
+ move.w #MCU_SIM_CDVCR, CDVCR
+
+ /* Wait for the PLL to settle */
+ move.w #16384, %d0
+pll_settle_wait:
+ subi.w #1, %d0
+ bne pll_settle_wait
+
+ /* Setup the system protection register, and watchdog timer register */
+ move.b #MCU_SIM_SWIV, SWIV
+ move.w #MCU_SIM_PICR, PICR
+ move.w #MCU_SIM_PITR, PITR
+ move.w #MCU_SIM_SYPCR, SYPCR
+
+ /* Clear DPRAM - system + parameter */
+ movea.l #_dprbase, %a0
+ movea.l #_dprbase+0x2000, %a1
+
+ /* Copy 0 to %a0 until %a0 == %a1 */
+clear_dpram:
+ movel #0, %a0@+
+ cmpal %a0, %a1
+ bhi clear_dpram
+
+configure_memory_controller:
+ /* Set up Global Memory Register (GMR) */
+ move.l #MCU_SIM_GMR, %d0
+ move.l %d0, GMR
+
+configure_chip_select_0:
+ move.l #RAMEND, %d0
+ subi.l #__ramstart, %d0
+ subq.l #0x01, %d0
+ eori.l #SIM_OR_MASK, %d0
+ ori.l #SIM_OR0_MASK, %d0
+ move.l %d0, OR0
+
+ move.l #__ramstart, %d0
+ ori.l #SIM_BR0_MASK, %d0
+ move.l %d0, BR0
+
+configure_chip_select_1:
+ move.l #ROMEND, %d0
+ subi.l #__rom_start, %d0
+ subq.l #0x01, %d0
+ eori.l #SIM_OR_MASK, %d0
+ ori.l #SIM_OR1_MASK, %d0
+ move.l %d0, OR1
+
+ move.l #__rom_start, %d0
+ ori.l #SIM_BR1_MASK, %d0
+ move.l %d0, BR1
+
+ move.w #MCU_SIM_PEPAR, PEPAR
+
+ /* point to vector table: */
+ move.l #_romvec, %a0
+ move.l #_ramvec, %a1
+copy_vectors:
+ move.l %a0@, %d0
+ move.l %d0, %a1@
+ move.l %a0@, %a1@
+ addq.l #0x04, %a0
+ addq.l #0x04, %a1
+ cmp.l #_start, %a0
+ blt copy_vectors
+
+ move.l #_ramvec, %a1
+ movec %a1, %vbr
+
+
+ /* Copy data segment from ROM to RAM */
+ moveal #_stext, %a0
+ moveal #_sdata, %a1
+ moveal #_edata, %a2
+
+ /* Copy %a0 to %a1 until %a1 == %a2 */
+LD1:
+ move.l %a0@, %d0
+ addq.l #0x04, %a0
+ move.l %d0, %a1@
+ addq.l #0x04, %a1
+ cmp.l #_edata, %a1
+ blt LD1
+
+ moveal #__bss_start, %a0
+ moveal #__bss_stop, %a1
+
+ /* Copy 0 to %a0 until %a0 == %a1 */
+L1:
+ movel #0, %a0@+
+ cmpal %a0, %a1
+ bhi L1
+
+load_quicc:
+ move.l #_dprbase, _quicc_base
+
+store_ram_size:
+ /* Set ram size information */
+ move.l #_sdata, _rambase
+ move.l #__bss_stop, _ramstart
+ move.l #RAMEND, %d0
+ sub.l #0x1000, %d0 /* Reserve 4K for stack space.*/
+ move.l %d0, _ramend /* Different from RAMEND.*/
+
+ pea 0
+ pea env
+ pea %sp@(4)
+ pea 0
+
+ lea init_thread_union, %a2
+ lea 0x2000(%a2), %sp
+
+lp:
+ jsr start_kernel
+
+_exit:
+ jmp _exit
+
+
+ .data
+ .align 4
+env:
+ .long 0
+_quicc_base:
+ .long 0
+_periph_base:
+ .long 0
+_ramvec:
+ .long 0
+_rambase:
+ .long 0
+_ramstart:
+ .long 0
+_ramend:
+ .long 0
+_dprbase:
+ .long 0xffffe000
+
+ .text
+
+ /*
+ * These are the exception vectors at boot up, they are copied into RAM
+ * and then overwritten as needed.
+ */
+
+.section ".data..initvect","awx"
+ .long RAMEND /* Reset: Initial Stack Pointer - 0. */
+ .long _start /* Reset: Initial Program Counter - 1. */
+ .long buserr /* Bus Error - 2. */
+ .long trap /* Address Error - 3. */
+ .long trap /* Illegal Instruction - 4. */
+ .long trap /* Divide by zero - 5. */
+ .long trap /* CHK, CHK2 Instructions - 6. */
+ .long trap /* TRAPcc, TRAPV Instructions - 7. */
+ .long trap /* Privilege Violation - 8. */
+ .long trap /* Trace - 9. */
+ .long trap /* Line 1010 Emulator - 10. */
+ .long trap /* Line 1111 Emualtor - 11. */
+ .long trap /* Harware Breakpoint - 12. */
+ .long trap /* (Reserved for Coprocessor Protocol Violation)- 13. */
+ .long trap /* Format Error - 14. */
+ .long trap /* Uninitialized Interrupt - 15. */
+ .long trap /* (Unassigned, Reserver) - 16. */
+ .long trap /* (Unassigned, Reserver) - 17. */
+ .long trap /* (Unassigned, Reserver) - 18. */
+ .long trap /* (Unassigned, Reserver) - 19. */
+ .long trap /* (Unassigned, Reserver) - 20. */
+ .long trap /* (Unassigned, Reserver) - 21. */
+ .long trap /* (Unassigned, Reserver) - 22. */
+ .long trap /* (Unassigned, Reserver) - 23. */
+ .long trap /* Spurious Interrupt - 24. */
+ .long trap /* Level 1 Interrupt Autovector - 25. */
+ .long trap /* Level 2 Interrupt Autovector - 26. */
+ .long trap /* Level 3 Interrupt Autovector - 27. */
+ .long trap /* Level 4 Interrupt Autovector - 28. */
+ .long trap /* Level 5 Interrupt Autovector - 29. */
+ .long trap /* Level 6 Interrupt Autovector - 30. */
+ .long trap /* Level 7 Interrupt Autovector - 31. */
+ .long system_call /* Trap Instruction Vectors 0 - 32. */
+ .long trap /* Trap Instruction Vectors 1 - 33. */
+ .long trap /* Trap Instruction Vectors 2 - 34. */
+ .long trap /* Trap Instruction Vectors 3 - 35. */
+ .long trap /* Trap Instruction Vectors 4 - 36. */
+ .long trap /* Trap Instruction Vectors 5 - 37. */
+ .long trap /* Trap Instruction Vectors 6 - 38. */
+ .long trap /* Trap Instruction Vectors 7 - 39. */
+ .long trap /* Trap Instruction Vectors 8 - 40. */
+ .long trap /* Trap Instruction Vectors 9 - 41. */
+ .long trap /* Trap Instruction Vectors 10 - 42. */
+ .long trap /* Trap Instruction Vectors 11 - 43. */
+ .long trap /* Trap Instruction Vectors 12 - 44. */
+ .long trap /* Trap Instruction Vectors 13 - 45. */
+ .long trap /* Trap Instruction Vectors 14 - 46. */
+ .long trap /* Trap Instruction Vectors 15 - 47. */
+ .long 0 /* (Reserved for Coprocessor) - 48. */
+ .long 0 /* (Reserved for Coprocessor) - 49. */
+ .long 0 /* (Reserved for Coprocessor) - 50. */
+ .long 0 /* (Reserved for Coprocessor) - 51. */
+ .long 0 /* (Reserved for Coprocessor) - 52. */
+ .long 0 /* (Reserved for Coprocessor) - 53. */
+ .long 0 /* (Reserved for Coprocessor) - 54. */
+ .long 0 /* (Reserved for Coprocessor) - 55. */
+ .long 0 /* (Reserved for Coprocessor) - 56. */
+ .long 0 /* (Reserved for Coprocessor) - 57. */
+ .long 0 /* (Reserved for Coprocessor) - 58. */
+ .long 0 /* (Unassigned, Reserved) - 59. */
+ .long 0 /* (Unassigned, Reserved) - 60. */
+ .long 0 /* (Unassigned, Reserved) - 61. */
+ .long 0 /* (Unassigned, Reserved) - 62. */
+ .long 0 /* (Unassigned, Reserved) - 63. */
+ /* The assignment of these vectors to the CPM is */
+ /* dependent on the configuration of the CPM vba */
+ /* fields. */
+ .long 0 /* (User-Defined Vectors 1) CPM Error - 64. */
+ .long 0 /* (User-Defined Vectors 2) CPM Parallel IO PC11- 65. */
+ .long 0 /* (User-Defined Vectors 3) CPM Parallel IO PC10- 66. */
+ .long 0 /* (User-Defined Vectors 4) CPM SMC2 / PIP - 67. */
+ .long 0 /* (User-Defined Vectors 5) CPM SMC1 - 68. */
+ .long 0 /* (User-Defined Vectors 6) CPM SPI - 69. */
+ .long 0 /* (User-Defined Vectors 7) CPM Parallel IO PC9 - 70. */
+ .long 0 /* (User-Defined Vectors 8) CPM Timer 4 - 71. */
+ .long 0 /* (User-Defined Vectors 9) CPM Reserved - 72. */
+ .long 0 /* (User-Defined Vectors 10) CPM Parallel IO PC8- 73. */
+ .long 0 /* (User-Defined Vectors 11) CPM Parallel IO PC7- 74. */
+ .long 0 /* (User-Defined Vectors 12) CPM Parallel IO PC6- 75. */
+ .long 0 /* (User-Defined Vectors 13) CPM Timer 3 - 76. */
+ .long 0 /* (User-Defined Vectors 14) CPM Reserved - 77. */
+ .long 0 /* (User-Defined Vectors 15) CPM Parallel IO PC5- 78. */
+ .long 0 /* (User-Defined Vectors 16) CPM Parallel IO PC4- 79. */
+ .long 0 /* (User-Defined Vectors 17) CPM Reserved - 80. */
+ .long 0 /* (User-Defined Vectors 18) CPM RISC Timer Tbl - 81. */
+ .long 0 /* (User-Defined Vectors 19) CPM Timer 2 - 82. */
+ .long 0 /* (User-Defined Vectors 21) CPM Reserved - 83. */
+ .long 0 /* (User-Defined Vectors 22) CPM IDMA2 - 84. */
+ .long 0 /* (User-Defined Vectors 23) CPM IDMA1 - 85. */
+ .long 0 /* (User-Defined Vectors 24) CPM SDMA Bus Err - 86. */
+ .long 0 /* (User-Defined Vectors 25) CPM Parallel IO PC3- 87. */
+ .long 0 /* (User-Defined Vectors 26) CPM Parallel IO PC2- 88. */
+ .long 0 /* (User-Defined Vectors 27) CPM Timer 1 - 89. */
+ .long 0 /* (User-Defined Vectors 28) CPM Parallel IO PC1- 90. */
+ .long 0 /* (User-Defined Vectors 29) CPM SCC 4 - 91. */
+ .long 0 /* (User-Defined Vectors 30) CPM SCC 3 - 92. */
+ .long 0 /* (User-Defined Vectors 31) CPM SCC 2 - 93. */
+ .long 0 /* (User-Defined Vectors 32) CPM SCC 1 - 94. */
+ .long 0 /* (User-Defined Vectors 33) CPM Parallel IO PC0- 95. */
+ /* I don't think anything uses the vectors after here. */
+ .long 0 /* (User-Defined Vectors 34) - 96. */
+ .long 0,0,0,0,0 /* (User-Defined Vectors 35 - 39). */
+ .long 0,0,0,0,0,0,0,0,0,0 /* (User-Defined Vectors 40 - 49). */
+ .long 0,0,0,0,0,0,0,0,0,0 /* (User-Defined Vectors 50 - 59). */
+ .long 0,0,0,0,0,0,0,0,0,0 /* (User-Defined Vectors 60 - 69). */
+ .long 0,0,0,0,0,0,0,0,0,0 /* (User-Defined Vectors 70 - 79). */
+ .long 0,0,0,0,0,0,0,0,0,0 /* (User-Defined Vectors 80 - 89). */
+ .long 0,0,0,0,0,0,0,0,0,0 /* (User-Defined Vectors 90 - 99). */
+ .long 0,0,0,0,0,0,0,0,0,0 /* (User-Defined Vectors 100 - 109). */
+ .long 0,0,0,0,0,0,0,0,0,0 /* (User-Defined Vectors 110 - 119). */
+ .long 0,0,0,0,0,0,0,0,0,0 /* (User-Defined Vectors 120 - 129). */
+ .long 0,0,0,0,0,0,0,0,0,0 /* (User-Defined Vectors 130 - 139). */
+ .long 0,0,0,0,0,0,0,0,0,0 /* (User-Defined Vectors 140 - 149). */
+ .long 0,0,0,0,0,0,0,0,0,0 /* (User-Defined Vectors 150 - 159). */
+ .long 0,0,0,0,0,0,0,0,0,0 /* (User-Defined Vectors 160 - 169). */
+ .long 0,0,0,0,0,0,0,0,0,0 /* (User-Defined Vectors 170 - 179). */
+ .long 0,0,0,0,0,0,0,0,0,0 /* (User-Defined Vectors 180 - 189). */
+ .long 0,0,0 /* (User-Defined Vectors 190 - 192). */
+.text
+ignore: rte