diff options
Diffstat (limited to 'arch/m68k/coldfire/m520x.c')
| -rw-r--r-- | arch/m68k/coldfire/m520x.c | 180 |
1 files changed, 180 insertions, 0 deletions
diff --git a/arch/m68k/coldfire/m520x.c b/arch/m68k/coldfire/m520x.c new file mode 100644 index 000000000..173834f25 --- /dev/null +++ b/arch/m68k/coldfire/m520x.c @@ -0,0 +1,180 @@ +/***************************************************************************/ + +/* + * m520x.c -- platform support for ColdFire 520x based boards + * + * Copyright (C) 2005, Freescale (www.freescale.com) + * Copyright (C) 2005, Intec Automation (mike@steroidmicros.com) + * Copyright (C) 1999-2007, Greg Ungerer (gerg@snapgear.com) + * Copyright (C) 2001-2003, SnapGear Inc. (www.snapgear.com) + */ + +/***************************************************************************/ + +#include <linux/kernel.h> +#include <linux/param.h> +#include <linux/init.h> +#include <linux/io.h> +#include <asm/machdep.h> +#include <asm/coldfire.h> +#include <asm/mcfsim.h> +#include <asm/mcfuart.h> +#include <asm/mcfclk.h> + +/***************************************************************************/ + +DEFINE_CLK(0, "flexbus", 2, MCF_CLK); +DEFINE_CLK(0, "fec.0", 12, MCF_CLK); +DEFINE_CLK(0, "edma", 17, MCF_CLK); +DEFINE_CLK(0, "intc.0", 18, MCF_CLK); +DEFINE_CLK(0, "iack.0", 21, MCF_CLK); +DEFINE_CLK(0, "mcfi2c.0", 22, MCF_CLK); +DEFINE_CLK(0, "mcfqspi.0", 23, MCF_CLK); +DEFINE_CLK(0, "mcfuart.0", 24, MCF_BUSCLK); +DEFINE_CLK(0, "mcfuart.1", 25, MCF_BUSCLK); +DEFINE_CLK(0, "mcfuart.2", 26, MCF_BUSCLK); +DEFINE_CLK(0, "mcftmr.0", 28, MCF_CLK); +DEFINE_CLK(0, "mcftmr.1", 29, MCF_CLK); +DEFINE_CLK(0, "mcftmr.2", 30, MCF_CLK); +DEFINE_CLK(0, "mcftmr.3", 31, MCF_CLK); + +DEFINE_CLK(0, "mcfpit.0", 32, MCF_CLK); +DEFINE_CLK(0, "mcfpit.1", 33, MCF_CLK); +DEFINE_CLK(0, "mcfeport.0", 34, MCF_CLK); +DEFINE_CLK(0, "mcfwdt.0", 35, MCF_CLK); +DEFINE_CLK(0, "pll.0", 36, MCF_CLK); +DEFINE_CLK(0, "sys.0", 40, MCF_BUSCLK); +DEFINE_CLK(0, "gpio.0", 41, MCF_BUSCLK); +DEFINE_CLK(0, "sdram.0", 42, MCF_CLK); + +struct clk *mcf_clks[] = { + &__clk_0_2, /* flexbus */ + &__clk_0_12, /* fec.0 */ + &__clk_0_17, /* edma */ + &__clk_0_18, /* intc.0 */ + &__clk_0_21, /* iack.0 */ + &__clk_0_22, /* mcfi2c.0 */ + &__clk_0_23, /* mcfqspi.0 */ + &__clk_0_24, /* mcfuart.0 */ + &__clk_0_25, /* mcfuart.1 */ + &__clk_0_26, /* mcfuart.2 */ + &__clk_0_28, /* mcftmr.0 */ + &__clk_0_29, /* mcftmr.1 */ + &__clk_0_30, /* mcftmr.2 */ + &__clk_0_31, /* mcftmr.3 */ + + &__clk_0_32, /* mcfpit.0 */ + &__clk_0_33, /* mcfpit.1 */ + &__clk_0_34, /* mcfeport.0 */ + &__clk_0_35, /* mcfwdt.0 */ + &__clk_0_36, /* pll.0 */ + &__clk_0_40, /* sys.0 */ + &__clk_0_41, /* gpio.0 */ + &__clk_0_42, /* sdram.0 */ +NULL, +}; + +static struct clk * const enable_clks[] __initconst = { + &__clk_0_2, /* flexbus */ + &__clk_0_18, /* intc.0 */ + &__clk_0_21, /* iack.0 */ + &__clk_0_24, /* mcfuart.0 */ + &__clk_0_25, /* mcfuart.1 */ + &__clk_0_26, /* mcfuart.2 */ + + &__clk_0_32, /* mcfpit.0 */ + &__clk_0_33, /* mcfpit.1 */ + &__clk_0_34, /* mcfeport.0 */ + &__clk_0_36, /* pll.0 */ + &__clk_0_40, /* sys.0 */ + &__clk_0_41, /* gpio.0 */ + &__clk_0_42, /* sdram.0 */ +}; + +static struct clk * const disable_clks[] __initconst = { + &__clk_0_12, /* fec.0 */ + &__clk_0_17, /* edma */ + &__clk_0_22, /* mcfi2c.0 */ + &__clk_0_23, /* mcfqspi.0 */ + &__clk_0_28, /* mcftmr.0 */ + &__clk_0_29, /* mcftmr.1 */ + &__clk_0_30, /* mcftmr.2 */ + &__clk_0_31, /* mcftmr.3 */ + &__clk_0_35, /* mcfwdt.0 */ +}; + + +static void __init m520x_clk_init(void) +{ + unsigned i; + + /* make sure these clocks are enabled */ + for (i = 0; i < ARRAY_SIZE(enable_clks); ++i) + __clk_init_enabled(enable_clks[i]); + /* make sure these clocks are disabled */ + for (i = 0; i < ARRAY_SIZE(disable_clks); ++i) + __clk_init_disabled(disable_clks[i]); +} + +/***************************************************************************/ + +static void __init m520x_qspi_init(void) +{ +#if IS_ENABLED(CONFIG_SPI_COLDFIRE_QSPI) + u16 par; + /* setup Port QS for QSPI with gpio CS control */ + writeb(0x3f, MCF_GPIO_PAR_QSPI); + /* make U1CTS and U2RTS gpio for cs_control */ + par = readw(MCF_GPIO_PAR_UART); + par &= 0x00ff; + writew(par, MCF_GPIO_PAR_UART); +#endif /* IS_ENABLED(CONFIG_SPI_COLDFIRE_QSPI) */ +} + +/***************************************************************************/ + +static void __init m520x_uarts_init(void) +{ + u16 par; + u8 par2; + + /* UART0 and UART1 GPIO pin setup */ + par = readw(MCF_GPIO_PAR_UART); + par |= MCF_GPIO_PAR_UART_PAR_UTXD0 | MCF_GPIO_PAR_UART_PAR_URXD0; + par |= MCF_GPIO_PAR_UART_PAR_UTXD1 | MCF_GPIO_PAR_UART_PAR_URXD1; + writew(par, MCF_GPIO_PAR_UART); + + /* UART1 GPIO pin setup */ + par2 = readb(MCF_GPIO_PAR_FECI2C); + par2 &= ~0x0F; + par2 |= MCF_GPIO_PAR_FECI2C_PAR_SCL_UTXD2 | + MCF_GPIO_PAR_FECI2C_PAR_SDA_URXD2; + writeb(par2, MCF_GPIO_PAR_FECI2C); +} + +/***************************************************************************/ + +static void __init m520x_fec_init(void) +{ + u8 v; + + /* Set multi-function pins to ethernet mode */ + v = readb(MCF_GPIO_PAR_FEC); + writeb(v | 0xf0, MCF_GPIO_PAR_FEC); + + v = readb(MCF_GPIO_PAR_FECI2C); + writeb(v | 0x0f, MCF_GPIO_PAR_FECI2C); +} + +/***************************************************************************/ + +void __init config_BSP(char *commandp, int size) +{ + mach_sched_init = hw_timer_init; + m520x_clk_init(); + m520x_uarts_init(); + m520x_fec_init(); + m520x_qspi_init(); +} + +/***************************************************************************/ |