diff options
Diffstat (limited to 'arch/m68k/ifpsp060/fskeleton.S')
| -rw-r--r-- | arch/m68k/ifpsp060/fskeleton.S | 342 |
1 files changed, 342 insertions, 0 deletions
diff --git a/arch/m68k/ifpsp060/fskeleton.S b/arch/m68k/ifpsp060/fskeleton.S new file mode 100644 index 000000000..0a1ae4f44 --- /dev/null +++ b/arch/m68k/ifpsp060/fskeleton.S @@ -0,0 +1,342 @@ +|~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ +|MOTOROLA MICROPROCESSOR & MEMORY TECHNOLOGY GROUP +|M68000 Hi-Performance Microprocessor Division +|M68060 Software Package +|Production Release P1.00 -- October 10, 1994 +| +|M68060 Software Package Copyright © 1993, 1994 Motorola Inc. All rights reserved. +| +|THE SOFTWARE is provided on an "AS IS" basis and without warranty. +|To the maximum extent permitted by applicable law, +|MOTOROLA DISCLAIMS ALL WARRANTIES WHETHER EXPRESS OR IMPLIED, +|INCLUDING IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE +|and any warranty against infringement with regard to the SOFTWARE +|(INCLUDING ANY MODIFIED VERSIONS THEREOF) and any accompanying written materials. +| +|To the maximum extent permitted by applicable law, +|IN NO EVENT SHALL MOTOROLA BE LIABLE FOR ANY DAMAGES WHATSOEVER +|(INCLUDING WITHOUT LIMITATION, DAMAGES FOR LOSS OF BUSINESS PROFITS, +|BUSINESS INTERRUPTION, LOSS OF BUSINESS INFORMATION, OR OTHER PECUNIARY LOSS) +|ARISING OF THE USE OR INABILITY TO USE THE SOFTWARE. +|Motorola assumes no responsibility for the maintenance and support of the SOFTWARE. +| +|You are hereby granted a copyright license to use, modify, and distribute the SOFTWARE +|so long as this entire notice is retained without alteration in any modified and/or +|redistributed versions, and that such modified versions are clearly identified as such. +|No licenses are granted by implication, estoppel or otherwise under any patents +|or trademarks of Motorola, Inc. +|~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ +| fskeleton.s +| +| This file contains: +| (1) example "Call-out"s +| (2) example package entry code +| (3) example "Call-out" table +| + +#include <linux/linkage.h> + +|################################ +| (1) EXAMPLE CALL-OUTS # +| # +| _060_fpsp_done() # +| _060_real_ovfl() # +| _060_real_unfl() # +| _060_real_operr() # +| _060_real_snan() # +| _060_real_dz() # +| _060_real_inex() # +| _060_real_bsun() # +| _060_real_fline() # +| _060_real_fpu_disabled() # +| _060_real_trap() # +|################################ + +| +| _060_fpsp_done(): +| +| This is the main exit point for the 68060 Floating-Point +| Software Package. For a normal exit, all 060FPSP routines call this +| routine. The operating system can do system dependent clean-up or +| simply execute an "rte" as with the sample code below. +| + .global _060_fpsp_done +_060_fpsp_done: + bral _060_isp_done | do the same as isp_done + +| +| _060_real_ovfl(): +| +| This is the exit point for the 060FPSP when an enabled overflow exception +| is present. The routine below should point to the operating system handler +| for enabled overflow conditions. The exception stack frame is an overflow +| stack frame. The FP state frame holds the EXCEPTIONAL OPERAND. +| +| The sample routine below simply clears the exception status bit and +| does an "rte". +| + .global _060_real_ovfl +_060_real_ovfl: + fsave -(%sp) + move.w #0x6000,0x2(%sp) + frestore (%sp)+ + bral trap | jump to trap handler + + +| +| _060_real_unfl(): +| +| This is the exit point for the 060FPSP when an enabled underflow exception +| is present. The routine below should point to the operating system handler +| for enabled underflow conditions. The exception stack frame is an underflow +| stack frame. The FP state frame holds the EXCEPTIONAL OPERAND. +| +| The sample routine below simply clears the exception status bit and +| does an "rte". +| + .global _060_real_unfl +_060_real_unfl: + fsave -(%sp) + move.w #0x6000,0x2(%sp) + frestore (%sp)+ + bral trap | jump to trap handler + +| +| _060_real_operr(): +| +| This is the exit point for the 060FPSP when an enabled operand error exception +| is present. The routine below should point to the operating system handler +| for enabled operand error exceptions. The exception stack frame is an operand error +| stack frame. The FP state frame holds the source operand of the faulting +| instruction. +| +| The sample routine below simply clears the exception status bit and +| does an "rte". +| + .global _060_real_operr +_060_real_operr: + fsave -(%sp) + move.w #0x6000,0x2(%sp) + frestore (%sp)+ + bral trap | jump to trap handler + +| +| _060_real_snan(): +| +| This is the exit point for the 060FPSP when an enabled signalling NaN exception +| is present. The routine below should point to the operating system handler +| for enabled signalling NaN exceptions. The exception stack frame is a signalling NaN +| stack frame. The FP state frame holds the source operand of the faulting +| instruction. +| +| The sample routine below simply clears the exception status bit and +| does an "rte". +| + .global _060_real_snan +_060_real_snan: + fsave -(%sp) + move.w #0x6000,0x2(%sp) + frestore (%sp)+ + bral trap | jump to trap handler + +| +| _060_real_dz(): +| +| This is the exit point for the 060FPSP when an enabled divide-by-zero exception +| is present. The routine below should point to the operating system handler +| for enabled divide-by-zero exceptions. The exception stack frame is a divide-by-zero +| stack frame. The FP state frame holds the source operand of the faulting +| instruction. +| +| The sample routine below simply clears the exception status bit and +| does an "rte". +| + .global _060_real_dz +_060_real_dz: + fsave -(%sp) + move.w #0x6000,0x2(%sp) + frestore (%sp)+ + bral trap | jump to trap handler + +| +| _060_real_inex(): +| +| This is the exit point for the 060FPSP when an enabled inexact exception +| is present. The routine below should point to the operating system handler +| for enabled inexact exceptions. The exception stack frame is an inexact +| stack frame. The FP state frame holds the source operand of the faulting +| instruction. +| +| The sample routine below simply clears the exception status bit and +| does an "rte". +| + .global _060_real_inex +_060_real_inex: + fsave -(%sp) + move.w #0x6000,0x2(%sp) + frestore (%sp)+ + bral trap | jump to trap handler + +| +| _060_real_bsun(): +| +| This is the exit point for the 060FPSP when an enabled bsun exception +| is present. The routine below should point to the operating system handler +| for enabled bsun exceptions. The exception stack frame is a bsun +| stack frame. +| +| The sample routine below clears the exception status bit, clears the NaN +| bit in the FPSR, and does an "rte". The instruction that caused the +| bsun will now be re-executed but with the NaN FPSR bit cleared. +| + .global _060_real_bsun +_060_real_bsun: +| fsave -(%sp) + + fmove.l %fpsr,-(%sp) + andi.b #0xfe,(%sp) + fmove.l (%sp)+,%fpsr + + bral trap | jump to trap handler + +| +| _060_real_fline(): +| +| This is the exit point for the 060FPSP when an F-Line Illegal exception is +| encountered. Three different types of exceptions can enter the F-Line exception +| vector number 11: FP Unimplemented Instructions, FP implemented instructions when +| the FPU is disabled, and F-Line Illegal instructions. The 060FPSP module +| _fpsp_fline() distinguishes between the three and acts appropriately. F-Line +| Illegals branch here. +| + .global _060_real_fline +_060_real_fline: + bral trap | jump to trap handler + +| +| _060_real_fpu_disabled(): +| +| This is the exit point for the 060FPSP when an FPU disabled exception is +| encountered. Three different types of exceptions can enter the F-Line exception +| vector number 11: FP Unimplemented Instructions, FP implemented instructions when +| the FPU is disabled, and F-Line Illegal instructions. The 060FPSP module +| _fpsp_fline() distinguishes between the three and acts appropriately. FPU disabled +| exceptions branch here. +| +| The sample code below enables the FPU, sets the PC field in the exception stack +| frame to the PC of the instruction causing the exception, and does an "rte". +| The execution of the instruction then proceeds with an enabled floating-point +| unit. +| + .global _060_real_fpu_disabled +_060_real_fpu_disabled: + move.l %d0,-(%sp) | enabled the fpu + .long 0x4E7A0808 |movec pcr,%d0 + bclr #0x1,%d0 + .long 0x4E7B0808 |movec %d0,pcr + move.l (%sp)+,%d0 + + move.l 0xc(%sp),0x2(%sp) | set "Current PC" + rte + +| +| _060_real_trap(): +| +| This is the exit point for the 060FPSP when an emulated "ftrapcc" instruction +| discovers that the trap condition is true and it should branch to the operating +| system handler for the trap exception vector number 7. +| +| The sample code below simply executes an "rte". +| + .global _060_real_trap +_060_real_trap: + bral trap | jump to trap handler + +|############################################################################ + +|################################# +| (2) EXAMPLE PACKAGE ENTRY CODE # +|################################# + + .global _060_fpsp_snan +_060_fpsp_snan: + bra.l _FP_CALL_TOP+0x80+0x00 + + .global _060_fpsp_operr +_060_fpsp_operr: + bra.l _FP_CALL_TOP+0x80+0x08 + + .global _060_fpsp_ovfl +_060_fpsp_ovfl: + bra.l _FP_CALL_TOP+0x80+0x10 + + .global _060_fpsp_unfl +_060_fpsp_unfl: + bra.l _FP_CALL_TOP+0x80+0x18 + + .global _060_fpsp_dz +_060_fpsp_dz: + bra.l _FP_CALL_TOP+0x80+0x20 + + .global _060_fpsp_inex +_060_fpsp_inex: + bra.l _FP_CALL_TOP+0x80+0x28 + + .global _060_fpsp_fline +_060_fpsp_fline: + bra.l _FP_CALL_TOP+0x80+0x30 + + .global _060_fpsp_unsupp +_060_fpsp_unsupp: + bra.l _FP_CALL_TOP+0x80+0x38 + + .global _060_fpsp_effadd +_060_fpsp_effadd: + bra.l _FP_CALL_TOP+0x80+0x40 + +|############################################################################ + +|############################### +| (3) EXAMPLE CALL-OUT SECTION # +|############################### + +| The size of this section MUST be 128 bytes!!! + +_FP_CALL_TOP: + .long _060_real_bsun - _FP_CALL_TOP + .long _060_real_snan - _FP_CALL_TOP + .long _060_real_operr - _FP_CALL_TOP + .long _060_real_ovfl - _FP_CALL_TOP + .long _060_real_unfl - _FP_CALL_TOP + .long _060_real_dz - _FP_CALL_TOP + .long _060_real_inex - _FP_CALL_TOP + .long _060_real_fline - _FP_CALL_TOP + .long _060_real_fpu_disabled - _FP_CALL_TOP + .long _060_real_trap - _FP_CALL_TOP + .long _060_real_trace - _FP_CALL_TOP + .long _060_real_access - _FP_CALL_TOP + .long _060_fpsp_done - _FP_CALL_TOP + + .long 0x00000000, 0x00000000, 0x00000000 + + .long _060_imem_read - _FP_CALL_TOP + .long _060_dmem_read - _FP_CALL_TOP + .long _060_dmem_write - _FP_CALL_TOP + .long _060_imem_read_word - _FP_CALL_TOP + .long _060_imem_read_long - _FP_CALL_TOP + .long _060_dmem_read_byte - _FP_CALL_TOP + .long _060_dmem_read_word - _FP_CALL_TOP + .long _060_dmem_read_long - _FP_CALL_TOP + .long _060_dmem_write_byte - _FP_CALL_TOP + .long _060_dmem_write_word - _FP_CALL_TOP + .long _060_dmem_write_long - _FP_CALL_TOP + + .long 0x00000000 + + .long 0x00000000, 0x00000000, 0x00000000, 0x00000000 + +|############################################################################ + +| 060 FPSP KERNEL PACKAGE NEEDS TO GO HERE!!! + +#include "fpsp.sa" |