diff options
Diffstat (limited to 'arch/mips/Makefile')
| -rw-r--r-- | arch/mips/Makefile | 423 |
1 files changed, 423 insertions, 0 deletions
diff --git a/arch/mips/Makefile b/arch/mips/Makefile new file mode 100644 index 000000000..ae2dd5905 --- /dev/null +++ b/arch/mips/Makefile @@ -0,0 +1,423 @@ +# +# This file is subject to the terms and conditions of the GNU General Public +# License. See the file "COPYING" in the main directory of this archive +# for more details. +# +# Copyright (C) 1994, 95, 96, 2003 by Ralf Baechle +# DECStation modifications by Paul M. Antoine, 1996 +# Copyright (C) 2002, 2003, 2004 Maciej W. Rozycki +# +# This file is included by the global makefile so that you can add your own +# architecture-specific flags and dependencies. Remember to do have actions +# for "archclean" cleaning up for this architecture. +# + +KBUILD_DEFCONFIG := ip22_defconfig + +# +# Select the object file format to substitute into the linker script. +# +ifdef CONFIG_CPU_LITTLE_ENDIAN +32bit-tool-archpref = mipsel +64bit-tool-archpref = mips64el +32bit-bfd = elf32-tradlittlemips +64bit-bfd = elf64-tradlittlemips +32bit-emul = elf32ltsmip +64bit-emul = elf64ltsmip +else +32bit-tool-archpref = mips +64bit-tool-archpref = mips64 +32bit-bfd = elf32-tradbigmips +64bit-bfd = elf64-tradbigmips +32bit-emul = elf32btsmip +64bit-emul = elf64btsmip +endif + +ifdef CONFIG_32BIT +tool-archpref = $(32bit-tool-archpref) +UTS_MACHINE := mips +endif +ifdef CONFIG_64BIT +tool-archpref = $(64bit-tool-archpref) +UTS_MACHINE := mips64 +endif + +ifneq ($(SUBARCH),$(ARCH)) + ifeq ($(CROSS_COMPILE),) + CROSS_COMPILE := $(call cc-cross-prefix, $(tool-archpref)-linux- $(tool-archpref)-linux-gnu- $(tool-archpref)-unknown-linux-gnu-) + endif +endif + +ifdef CONFIG_FUNCTION_GRAPH_TRACER + ifndef KBUILD_MCOUNT_RA_ADDRESS + ifeq ($(call cc-option-yn,-mmcount-ra-address), y) + cflags-y += -mmcount-ra-address -DKBUILD_MCOUNT_RA_ADDRESS + endif + endif +endif +cflags-y += $(call cc-option, -mno-check-zero-division) + +ifdef CONFIG_32BIT +ld-emul = $(32bit-emul) +vmlinux-32 = vmlinux +vmlinux-64 = vmlinux.64 + +cflags-y += -mabi=32 +endif + +ifdef CONFIG_64BIT +ld-emul = $(64bit-emul) +vmlinux-32 = vmlinux.32 +vmlinux-64 = vmlinux + +cflags-y += -mabi=64 +endif + +all-$(CONFIG_BOOT_ELF32) := $(vmlinux-32) +all-$(CONFIG_BOOT_ELF64) := $(vmlinux-64) +all-$(CONFIG_SYS_SUPPORTS_ZBOOT)+= vmlinuz + +# +# GCC uses -G 0 -mabicalls -fpic as default. We don't want PIC in the kernel +# code since it only slows down the whole thing. At some point we might make +# use of global pointer optimizations but their use of $28 conflicts with +# the current pointer optimization. +# +# The DECStation requires an ECOFF kernel for remote booting, other MIPS +# machines may also. Since BFD is incredibly buggy with respect to +# crossformat linking we rely on the elf2ecoff tool for format conversion. +# +cflags-y += -G 0 -mno-abicalls -fno-pic -pipe +cflags-y += -msoft-float +LDFLAGS_vmlinux += -G 0 -static -n -nostdlib +KBUILD_AFLAGS_MODULE += -mlong-calls +KBUILD_CFLAGS_MODULE += -mlong-calls + +# +# pass -msoft-float to GAS if it supports it. However on newer binutils +# (specifically newer than 2.24.51.20140728) we then also need to explicitly +# set ".set hardfloat" in all files which manipulate floating point registers. +# +ifneq ($(call as-option,-Wa$(comma)-msoft-float,),) + cflags-y += -DGAS_HAS_SET_HARDFLOAT -Wa,-msoft-float +endif + +cflags-y += -ffreestanding + +# +# We explicitly add the endianness specifier if needed, this allows +# to compile kernels with a toolchain for the other endianness. We +# carefully avoid to add it redundantly because gcc 3.3/3.4 complains +# when fed the toolchain default! +# +# Certain gcc versions up to gcc 4.1.1 (probably 4.2-subversion as of +# 2006-10-10 don't properly change the predefined symbols if -EB / -EL +# are used, so we kludge that here. A bug has been filed at +# http://gcc.gnu.org/bugzilla/show_bug.cgi?id=29413. +# +undef-all += -UMIPSEB -U_MIPSEB -U__MIPSEB -U__MIPSEB__ +undef-all += -UMIPSEL -U_MIPSEL -U__MIPSEL -U__MIPSEL__ +predef-be += -DMIPSEB -D_MIPSEB -D__MIPSEB -D__MIPSEB__ +predef-le += -DMIPSEL -D_MIPSEL -D__MIPSEL -D__MIPSEL__ +cflags-$(CONFIG_CPU_BIG_ENDIAN) += $(shell $(CC) -dumpmachine |grep -q 'mips.*el-.*' && echo -EB $(undef-all) $(predef-be)) +cflags-$(CONFIG_CPU_LITTLE_ENDIAN) += $(shell $(CC) -dumpmachine |grep -q 'mips.*el-.*' || echo -EL $(undef-all) $(predef-le)) + +cflags-$(CONFIG_SB1XXX_CORELIS) += $(call cc-option,-mno-sched-prolog) \ + -fno-omit-frame-pointer +# +# CPU-dependent compiler/assembler options for optimization. +# +cflags-$(CONFIG_CPU_R3000) += -march=r3000 +cflags-$(CONFIG_CPU_TX39XX) += -march=r3900 +cflags-$(CONFIG_CPU_R6000) += -march=r6000 -Wa,--trap +cflags-$(CONFIG_CPU_R4300) += -march=r4300 -Wa,--trap +cflags-$(CONFIG_CPU_VR41XX) += -march=r4100 -Wa,--trap +cflags-$(CONFIG_CPU_R4X00) += -march=r4600 -Wa,--trap +cflags-$(CONFIG_CPU_TX49XX) += -march=r4600 -Wa,--trap +cflags-$(CONFIG_CPU_MIPS32_R1) += $(call cc-option,-march=mips32,-mips32 -U_MIPS_ISA -D_MIPS_ISA=_MIPS_ISA_MIPS32) \ + -Wa,-mips32 -Wa,--trap +cflags-$(CONFIG_CPU_MIPS32_R2) += $(call cc-option,-march=mips32r2,-mips32r2 -U_MIPS_ISA -D_MIPS_ISA=_MIPS_ISA_MIPS32) \ + -Wa,-mips32r2 -Wa,--trap +cflags-$(CONFIG_CPU_MIPS32_R6) += -march=mips32r6 -Wa,--trap +cflags-$(CONFIG_CPU_MIPS64_R1) += $(call cc-option,-march=mips64,-mips64 -U_MIPS_ISA -D_MIPS_ISA=_MIPS_ISA_MIPS64) \ + -Wa,-mips64 -Wa,--trap +cflags-$(CONFIG_CPU_MIPS64_R2) += $(call cc-option,-march=mips64r2,-mips64r2 -U_MIPS_ISA -D_MIPS_ISA=_MIPS_ISA_MIPS64) \ + -Wa,-mips64r2 -Wa,--trap +cflags-$(CONFIG_CPU_MIPS64_R6) += -march=mips64r6 -Wa,--trap +cflags-$(CONFIG_CPU_R5000) += -march=r5000 -Wa,--trap +cflags-$(CONFIG_CPU_R5432) += $(call cc-option,-march=r5400,-march=r5000) \ + -Wa,--trap +cflags-$(CONFIG_CPU_R5500) += $(call cc-option,-march=r5500,-march=r5000) \ + -Wa,--trap +cflags-$(CONFIG_CPU_NEVADA) += $(call cc-option,-march=rm5200,-march=r5000) \ + -Wa,--trap +cflags-$(CONFIG_CPU_RM7000) += $(call cc-option,-march=rm7000,-march=r5000) \ + -Wa,--trap +cflags-$(CONFIG_CPU_SB1) += $(call cc-option,-march=sb1,-march=r5000) \ + -Wa,--trap +cflags-$(CONFIG_CPU_SB1) += $(call cc-option,-mno-mdmx) +cflags-$(CONFIG_CPU_SB1) += $(call cc-option,-mno-mips3d) +cflags-$(CONFIG_CPU_R8000) += -march=r8000 -Wa,--trap +cflags-$(CONFIG_CPU_R10000) += $(call cc-option,-march=r10000,-march=r8000) \ + -Wa,--trap +cflags-$(CONFIG_CPU_CAVIUM_OCTEON) += $(call cc-option,-march=octeon) -Wa,--trap +ifeq (,$(findstring march=octeon, $(cflags-$(CONFIG_CPU_CAVIUM_OCTEON)))) +cflags-$(CONFIG_CPU_CAVIUM_OCTEON) += -Wa,-march=octeon +endif +cflags-$(CONFIG_CAVIUM_CN63XXP1) += -Wa,-mfix-cn63xxp1 +cflags-$(CONFIG_CPU_BMIPS) += -march=mips32 -Wa,-mips32 -Wa,--trap +# +# binutils from v2.25 on and gcc starting from v4.9.0 treat -march=loongson3a +# as MIPS64 R1; older versions as just R1. This leaves the possibility open +# that GCC might generate R2 code for -march=loongson3a which then is rejected +# by GAS. The cc-option can't probe for this behaviour so -march=loongson3a +# can't easily be used safely within the kbuild framework. +# +cflags-$(CONFIG_CPU_LOONGSON3) += \ + $(call cc-option,-march=mips64r2,-mips64r2 -U_MIPS_ISA -D_MIPS_ISA=_MIPS_ISA_MIPS64) \ + -Wa,-mips64r2 -Wa,--trap + +cflags-$(CONFIG_CPU_R4000_WORKAROUNDS) += $(call cc-option,-mfix-r4000,) +cflags-$(CONFIG_CPU_R4400_WORKAROUNDS) += $(call cc-option,-mfix-r4400,) +cflags-$(CONFIG_CPU_DADDI_WORKAROUNDS) += $(call cc-option,-mno-daddi,) + +ifdef CONFIG_CPU_SB1 +ifdef CONFIG_SB1_PASS_1_WORKAROUNDS +KBUILD_AFLAGS_MODULE += -msb1-pass1-workarounds +KBUILD_CFLAGS_MODULE += -msb1-pass1-workarounds +endif +endif + +# For smartmips configurations, there are hundreds of warnings due to ISA overrides +# in assembly and header files. smartmips is only supported for MIPS32r1 onwards +# and there is no support for 64-bit. Various '.set mips2' or '.set mips3' or +# similar directives in the kernel will spam the build logs with the following warnings: +# Warning: the `smartmips' extension requires MIPS32 revision 1 or greater +# or +# Warning: the 64-bit MIPS architecture does not support the `smartmips' extension +# Pass -Wa,--no-warn to disable all assembler warnings until the kernel code has +# been fixed properly. +mips-cflags := $(cflags-y) +ifeq ($(CONFIG_CPU_HAS_SMARTMIPS),y) +smartmips-ase := $(call cc-option-yn,$(mips-cflags) -msmartmips) +cflags-$(smartmips-ase) += -msmartmips -Wa,--no-warn +endif +ifeq ($(CONFIG_CPU_MICROMIPS),y) +micromips-ase := $(call cc-option-yn,$(mips-cflags) -mmicromips) +cflags-$(micromips-ase) += -mmicromips +endif +ifeq ($(CONFIG_CPU_HAS_MSA),y) +toolchain-msa := $(call cc-option-yn,$(mips-cflags) -mhard-float -mfp64 -Wa$(comma)-mmsa) +cflags-$(toolchain-msa) += -DTOOLCHAIN_SUPPORTS_MSA +endif + +# +# Firmware support +# +libs-$(CONFIG_FW_ARC) += arch/mips/fw/arc/ +libs-$(CONFIG_FW_CFE) += arch/mips/fw/cfe/ +libs-$(CONFIG_FW_SNIPROM) += arch/mips/fw/sni/ +libs-y += arch/mips/fw/lib/ + +# +# Kernel compression +# +ifdef SYS_SUPPORTS_ZBOOT +COMPRESSION_FNAME = vmlinuz +else +COMPRESSION_FNAME = vmlinux +endif + +# +# Board-dependent options and extra files +# +include arch/mips/Kbuild.platforms + +ifdef CONFIG_PHYSICAL_START +load-y = $(CONFIG_PHYSICAL_START) +endif +entry-y = 0x$(shell $(NM) vmlinux 2>/dev/null \ + | grep "\bkernel_entry\b" | cut -f1 -d \ ) + +cflags-y += -I$(srctree)/arch/mips/include/asm/mach-generic +drivers-$(CONFIG_PCI) += arch/mips/pci/ + +# +# Automatically detect the build format. By default we choose +# the elf format according to the load address. +# We can always force a build with a 64-bits symbol format by +# passing 'KBUILD_SYM32=no' option to the make's command line. +# +ifdef CONFIG_64BIT + ifndef KBUILD_SYM32 + ifeq ($(shell expr $(load-y) \< 0xffffffff80000000), 0) + KBUILD_SYM32 = y + endif + endif + + ifeq ($(KBUILD_SYM32)$(call cc-option-yn,-msym32), yy) + cflags-y += -msym32 -DKBUILD_64BIT_SYM32 + else + ifeq ($(CONFIG_CPU_DADDI_WORKAROUNDS), y) + $(error CONFIG_CPU_DADDI_WORKAROUNDS unsupported without -msym32) + endif + endif +endif + +KBUILD_AFLAGS += $(cflags-y) +KBUILD_CFLAGS += $(cflags-y) +KBUILD_CPPFLAGS += -DVMLINUX_LOAD_ADDRESS=$(load-y) +KBUILD_CPPFLAGS += -DDATAOFFSET=$(if $(dataoffset-y),$(dataoffset-y),0) + +bootvars-y = VMLINUX_LOAD_ADDRESS=$(load-y) \ + VMLINUX_ENTRY_ADDRESS=$(entry-y) + +LDFLAGS += -m $(ld-emul) + +ifdef CONFIG_MIPS +CHECKFLAGS += $(shell $(CC) $(KBUILD_CFLAGS) -dM -E -x c /dev/null | \ + egrep -vw '__GNUC_(|MINOR_|PATCHLEVEL_)_' | \ + sed -e "s/^\#define /-D'/" -e "s/ /'='/" -e "s/$$/'/" -e 's/\$$/&&/g') +ifdef CONFIG_64BIT +CHECKFLAGS += -m64 +endif +endif + +OBJCOPYFLAGS += --remove-section=.reginfo + +head-y := arch/mips/kernel/head.o + +libs-y += arch/mips/lib/ +libs-y += arch/mips/math-emu/ + +# See arch/mips/Kbuild for content of core part of the kernel +core-y += arch/mips/ + +drivers-$(CONFIG_OPROFILE) += arch/mips/oprofile/ + +# suspend and hibernation support +drivers-$(CONFIG_PM) += arch/mips/power/ + +# boot image targets (arch/mips/boot/) +boot-y := vmlinux.bin +boot-y += vmlinux.ecoff +boot-y += vmlinux.srec +ifeq ($(shell expr $(load-y) \< 0xffffffff80000000 2> /dev/null), 0) +boot-y += uImage +boot-y += uImage.bin +boot-y += uImage.bz2 +boot-y += uImage.gz +boot-y += uImage.lzma +boot-y += uImage.lzo +endif + +# compressed boot image targets (arch/mips/boot/compressed/) +bootz-y := vmlinuz +bootz-y += vmlinuz.bin +bootz-y += vmlinuz.ecoff +bootz-y += vmlinuz.srec + +ifdef CONFIG_LASAT +rom.bin rom.sw: vmlinux + $(Q)$(MAKE) $(build)=arch/mips/lasat/image \ + $(bootvars-y) $@ +endif + +# +# Some machines like the Indy need 32-bit ELF binaries for booting purposes. +# Other need ECOFF, so we build a 32-bit ELF binary for them which we then +# convert to ECOFF using elf2ecoff. +# +quiet_cmd_32 = OBJCOPY $@ + cmd_32 = $(OBJCOPY) -O $(32bit-bfd) $(OBJCOPYFLAGS) $< $@ +vmlinux.32: vmlinux + $(call cmd,32) + +# +# The 64-bit ELF tools are pretty broken so at this time we generate 64-bit +# ELF files from 32-bit files by conversion. +# +quiet_cmd_64 = OBJCOPY $@ + cmd_64 = $(OBJCOPY) -O $(64bit-bfd) $(OBJCOPYFLAGS) $< $@ +vmlinux.64: vmlinux + $(call cmd,64) + +all: $(all-y) + +# boot +$(boot-y): $(vmlinux-32) FORCE + $(Q)$(MAKE) $(build)=arch/mips/boot VMLINUX=$(vmlinux-32) \ + $(bootvars-y) arch/mips/boot/$@ + +ifdef CONFIG_SYS_SUPPORTS_ZBOOT +# boot/compressed +$(bootz-y): $(vmlinux-32) FORCE + $(Q)$(MAKE) $(build)=arch/mips/boot/compressed \ + $(bootvars-y) 32bit-bfd=$(32bit-bfd) $@ +else +vmlinuz: FORCE + @echo ' CONFIG_SYS_SUPPORTS_ZBOOT is not enabled' + /bin/false +endif + + +CLEAN_FILES += vmlinux.32 vmlinux.64 + +# device-trees +core-$(CONFIG_BUILTIN_DTB) += arch/mips/boot/dts/ + +%.dtb %.dtb.S %.dtb.o: | scripts + $(Q)$(MAKE) $(build)=arch/mips/boot/dts arch/mips/boot/dts/$@ + +PHONY += dtbs +dtbs: scripts + $(Q)$(MAKE) $(build)=arch/mips/boot/dts + +PHONY += dtbs_install +dtbs_install: + $(Q)$(MAKE) $(dtbinst)=arch/mips/boot/dts + +archprepare: +ifdef CONFIG_MIPS32_N32 + @echo ' Checking missing-syscalls for N32' + $(Q)$(MAKE) $(build)=. missing-syscalls missing_syscalls_flags="-mabi=n32" +endif +ifdef CONFIG_MIPS32_O32 + @echo ' Checking missing-syscalls for O32' + $(Q)$(MAKE) $(build)=. missing-syscalls missing_syscalls_flags="-mabi=32" +endif + +install: + $(Q)install -D -m 755 vmlinux $(INSTALL_PATH)/vmlinux-$(KERNELRELEASE) +ifdef CONFIG_SYS_SUPPORTS_ZBOOT + $(Q)install -D -m 755 vmlinuz $(INSTALL_PATH)/vmlinuz-$(KERNELRELEASE) +endif + $(Q)install -D -m 644 .config $(INSTALL_PATH)/config-$(KERNELRELEASE) + $(Q)install -D -m 644 System.map $(INSTALL_PATH)/System.map-$(KERNELRELEASE) + +archclean: + $(Q)$(MAKE) $(clean)=arch/mips/boot + $(Q)$(MAKE) $(clean)=arch/mips/boot/compressed + $(Q)$(MAKE) $(clean)=arch/mips/lasat + +define archhelp + echo ' install - install kernel into $(INSTALL_PATH)' + echo ' vmlinux.ecoff - ECOFF boot image' + echo ' vmlinux.bin - Raw binary boot image' + echo ' vmlinux.srec - SREC boot image' + echo ' vmlinux.32 - 64-bit boot image wrapped in 32bits (IP22/IP32)' + echo ' vmlinuz - Compressed boot(zboot) image' + echo ' vmlinuz.ecoff - ECOFF zboot image' + echo ' vmlinuz.bin - Raw binary zboot image' + echo ' vmlinuz.srec - SREC zboot image' + echo ' uImage - U-Boot image' + echo ' uImage.bin - U-Boot image (uncompressed)' + echo ' uImage.bz2 - U-Boot image (bz2)' + echo ' uImage.gz - U-Boot image (gzip)' + echo ' uImage.lzma - U-Boot image (lzma)' + echo ' uImage.lzo - U-Boot image (lzo)' + echo ' dtbs - Device-tree blobs for enabled boards' + echo ' dtbs_install - Install dtbs to $(INSTALL_DTBS_PATH)' + echo + echo ' These will be default as appropriate for a configured platform.' +endef |