diff options
Diffstat (limited to 'arch/mips/alchemy/devboards/db1300.c')
-rw-r--r-- | arch/mips/alchemy/devboards/db1300.c | 866 |
1 files changed, 866 insertions, 0 deletions
diff --git a/arch/mips/alchemy/devboards/db1300.c b/arch/mips/alchemy/devboards/db1300.c new file mode 100644 index 000000000..1c64fdbe4 --- /dev/null +++ b/arch/mips/alchemy/devboards/db1300.c @@ -0,0 +1,866 @@ +/* + * DBAu1300 init and platform device setup. + * + * (c) 2009 Manuel Lauss <manuel.lauss@googlemail.com> + */ + +#include <linux/clk.h> +#include <linux/dma-mapping.h> +#include <linux/gpio.h> +#include <linux/gpio_keys.h> +#include <linux/init.h> +#include <linux/input.h> /* KEY_* codes */ +#include <linux/i2c.h> +#include <linux/io.h> +#include <linux/leds.h> +#include <linux/ata_platform.h> +#include <linux/mmc/host.h> +#include <linux/module.h> +#include <linux/mtd/mtd.h> +#include <linux/mtd/nand.h> +#include <linux/mtd/partitions.h> +#include <linux/platform_device.h> +#include <linux/smsc911x.h> +#include <linux/wm97xx.h> + +#include <asm/mach-au1x00/au1000.h> +#include <asm/mach-au1x00/au1100_mmc.h> +#include <asm/mach-au1x00/au1200fb.h> +#include <asm/mach-au1x00/au1xxx_dbdma.h> +#include <asm/mach-au1x00/au1xxx_psc.h> +#include <asm/mach-db1x00/bcsr.h> +#include <asm/mach-au1x00/prom.h> + +#include "platform.h" + +/* FPGA (external mux) interrupt sources */ +#define DB1300_FIRST_INT (ALCHEMY_GPIC_INT_LAST + 1) +#define DB1300_IDE_INT (DB1300_FIRST_INT + 0) +#define DB1300_ETH_INT (DB1300_FIRST_INT + 1) +#define DB1300_CF_INT (DB1300_FIRST_INT + 2) +#define DB1300_VIDEO_INT (DB1300_FIRST_INT + 4) +#define DB1300_HDMI_INT (DB1300_FIRST_INT + 5) +#define DB1300_DC_INT (DB1300_FIRST_INT + 6) +#define DB1300_FLASH_INT (DB1300_FIRST_INT + 7) +#define DB1300_CF_INSERT_INT (DB1300_FIRST_INT + 8) +#define DB1300_CF_EJECT_INT (DB1300_FIRST_INT + 9) +#define DB1300_AC97_INT (DB1300_FIRST_INT + 10) +#define DB1300_AC97_PEN_INT (DB1300_FIRST_INT + 11) +#define DB1300_SD1_INSERT_INT (DB1300_FIRST_INT + 12) +#define DB1300_SD1_EJECT_INT (DB1300_FIRST_INT + 13) +#define DB1300_OTG_VBUS_OC_INT (DB1300_FIRST_INT + 14) +#define DB1300_HOST_VBUS_OC_INT (DB1300_FIRST_INT + 15) +#define DB1300_LAST_INT (DB1300_FIRST_INT + 15) + +/* SMSC9210 CS */ +#define DB1300_ETH_PHYS_ADDR 0x19000000 +#define DB1300_ETH_PHYS_END 0x197fffff + +/* ATA CS */ +#define DB1300_IDE_PHYS_ADDR 0x18800000 +#define DB1300_IDE_REG_SHIFT 5 +#define DB1300_IDE_PHYS_LEN (16 << DB1300_IDE_REG_SHIFT) + +/* NAND CS */ +#define DB1300_NAND_PHYS_ADDR 0x20000000 +#define DB1300_NAND_PHYS_END 0x20000fff + + +static struct i2c_board_info db1300_i2c_devs[] __initdata = { + { I2C_BOARD_INFO("wm8731", 0x1b), }, /* I2S audio codec */ + { I2C_BOARD_INFO("ne1619", 0x2d), }, /* adm1025-compat hwmon */ +}; + +/* multifunction pins to assign to GPIO controller */ +static int db1300_gpio_pins[] __initdata = { + AU1300_PIN_LCDPWM0, AU1300_PIN_PSC2SYNC1, AU1300_PIN_WAKE1, + AU1300_PIN_WAKE2, AU1300_PIN_WAKE3, AU1300_PIN_FG3AUX, + AU1300_PIN_EXTCLK1, + -1, /* terminator */ +}; + +/* multifunction pins to assign to device functions */ +static int db1300_dev_pins[] __initdata = { + /* wake-from-str pins 0-3 */ + AU1300_PIN_WAKE0, + /* external clock sources for PSC0 */ + AU1300_PIN_EXTCLK0, + /* 8bit MMC interface on SD0: 6-9 */ + AU1300_PIN_SD0DAT4, AU1300_PIN_SD0DAT5, AU1300_PIN_SD0DAT6, + AU1300_PIN_SD0DAT7, + /* UART1 pins: 11-18 */ + AU1300_PIN_U1RI, AU1300_PIN_U1DCD, AU1300_PIN_U1DSR, + AU1300_PIN_U1CTS, AU1300_PIN_U1RTS, AU1300_PIN_U1DTR, + AU1300_PIN_U1RX, AU1300_PIN_U1TX, + /* UART0 pins: 19-24 */ + AU1300_PIN_U0RI, AU1300_PIN_U0DCD, AU1300_PIN_U0DSR, + AU1300_PIN_U0CTS, AU1300_PIN_U0RTS, AU1300_PIN_U0DTR, + /* UART2: 25-26 */ + AU1300_PIN_U2RX, AU1300_PIN_U2TX, + /* UART3: 27-28 */ + AU1300_PIN_U3RX, AU1300_PIN_U3TX, + /* LCD controller PWMs, ext pixclock: 30-31 */ + AU1300_PIN_LCDPWM1, AU1300_PIN_LCDCLKIN, + /* SD1 interface: 32-37 */ + AU1300_PIN_SD1DAT0, AU1300_PIN_SD1DAT1, AU1300_PIN_SD1DAT2, + AU1300_PIN_SD1DAT3, AU1300_PIN_SD1CMD, AU1300_PIN_SD1CLK, + /* SD2 interface: 38-43 */ + AU1300_PIN_SD2DAT0, AU1300_PIN_SD2DAT1, AU1300_PIN_SD2DAT2, + AU1300_PIN_SD2DAT3, AU1300_PIN_SD2CMD, AU1300_PIN_SD2CLK, + /* PSC0/1 clocks: 44-45 */ + AU1300_PIN_PSC0CLK, AU1300_PIN_PSC1CLK, + /* PSCs: 46-49/50-53/54-57/58-61 */ + AU1300_PIN_PSC0SYNC0, AU1300_PIN_PSC0SYNC1, AU1300_PIN_PSC0D0, + AU1300_PIN_PSC0D1, + AU1300_PIN_PSC1SYNC0, AU1300_PIN_PSC1SYNC1, AU1300_PIN_PSC1D0, + AU1300_PIN_PSC1D1, + AU1300_PIN_PSC2SYNC0, AU1300_PIN_PSC2D0, + AU1300_PIN_PSC2D1, + AU1300_PIN_PSC3SYNC0, AU1300_PIN_PSC3SYNC1, AU1300_PIN_PSC3D0, + AU1300_PIN_PSC3D1, + /* PCMCIA interface: 62-70 */ + AU1300_PIN_PCE2, AU1300_PIN_PCE1, AU1300_PIN_PIOS16, + AU1300_PIN_PIOR, AU1300_PIN_PWE, AU1300_PIN_PWAIT, + AU1300_PIN_PREG, AU1300_PIN_POE, AU1300_PIN_PIOW, + /* camera interface H/V sync inputs: 71-72 */ + AU1300_PIN_CIMLS, AU1300_PIN_CIMFS, + /* PSC2/3 clocks: 73-74 */ + AU1300_PIN_PSC2CLK, AU1300_PIN_PSC3CLK, + -1, /* terminator */ +}; + +static void __init db1300_gpio_config(void) +{ + int *i; + + i = &db1300_dev_pins[0]; + while (*i != -1) + au1300_pinfunc_to_dev(*i++); + + i = &db1300_gpio_pins[0]; + while (*i != -1) + au1300_gpio_direction_input(*i++);/* implies pin_to_gpio */ + + au1300_set_dbdma_gpio(1, AU1300_PIN_FG3AUX); +} + +/**********************************************************************/ + +static void au1300_nand_cmd_ctrl(struct mtd_info *mtd, int cmd, + unsigned int ctrl) +{ + struct nand_chip *this = mtd->priv; + unsigned long ioaddr = (unsigned long)this->IO_ADDR_W; + + ioaddr &= 0xffffff00; + + if (ctrl & NAND_CLE) { + ioaddr += MEM_STNAND_CMD; + } else if (ctrl & NAND_ALE) { + ioaddr += MEM_STNAND_ADDR; + } else { + /* assume we want to r/w real data by default */ + ioaddr += MEM_STNAND_DATA; + } + this->IO_ADDR_R = this->IO_ADDR_W = (void __iomem *)ioaddr; + if (cmd != NAND_CMD_NONE) { + __raw_writeb(cmd, this->IO_ADDR_W); + wmb(); + } +} + +static int au1300_nand_device_ready(struct mtd_info *mtd) +{ + return alchemy_rdsmem(AU1000_MEM_STSTAT) & 1; +} + +static struct mtd_partition db1300_nand_parts[] = { + { + .name = "NAND FS 0", + .offset = 0, + .size = 8 * 1024 * 1024, + }, + { + .name = "NAND FS 1", + .offset = MTDPART_OFS_APPEND, + .size = MTDPART_SIZ_FULL + }, +}; + +struct platform_nand_data db1300_nand_platdata = { + .chip = { + .nr_chips = 1, + .chip_offset = 0, + .nr_partitions = ARRAY_SIZE(db1300_nand_parts), + .partitions = db1300_nand_parts, + .chip_delay = 20, + }, + .ctrl = { + .dev_ready = au1300_nand_device_ready, + .cmd_ctrl = au1300_nand_cmd_ctrl, + }, +}; + +static struct resource db1300_nand_res[] = { + [0] = { + .start = DB1300_NAND_PHYS_ADDR, + .end = DB1300_NAND_PHYS_ADDR + 0xff, + .flags = IORESOURCE_MEM, + }, +}; + +static struct platform_device db1300_nand_dev = { + .name = "gen_nand", + .num_resources = ARRAY_SIZE(db1300_nand_res), + .resource = db1300_nand_res, + .id = -1, + .dev = { + .platform_data = &db1300_nand_platdata, + } +}; + +/**********************************************************************/ + +static struct resource db1300_eth_res[] = { + [0] = { + .start = DB1300_ETH_PHYS_ADDR, + .end = DB1300_ETH_PHYS_END, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = DB1300_ETH_INT, + .end = DB1300_ETH_INT, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct smsc911x_platform_config db1300_eth_config = { + .phy_interface = PHY_INTERFACE_MODE_MII, + .irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_LOW, + .irq_type = SMSC911X_IRQ_TYPE_PUSH_PULL, + .flags = SMSC911X_USE_32BIT, +}; + +static struct platform_device db1300_eth_dev = { + .name = "smsc911x", + .id = -1, + .num_resources = ARRAY_SIZE(db1300_eth_res), + .resource = db1300_eth_res, + .dev = { + .platform_data = &db1300_eth_config, + }, +}; + +/**********************************************************************/ + +static struct resource au1300_psc1_res[] = { + [0] = { + .start = AU1300_PSC1_PHYS_ADDR, + .end = AU1300_PSC1_PHYS_ADDR + 0x0fff, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = AU1300_PSC1_INT, + .end = AU1300_PSC1_INT, + .flags = IORESOURCE_IRQ, + }, + [2] = { + .start = AU1300_DSCR_CMD0_PSC1_TX, + .end = AU1300_DSCR_CMD0_PSC1_TX, + .flags = IORESOURCE_DMA, + }, + [3] = { + .start = AU1300_DSCR_CMD0_PSC1_RX, + .end = AU1300_DSCR_CMD0_PSC1_RX, + .flags = IORESOURCE_DMA, + }, +}; + +static struct platform_device db1300_ac97_dev = { + .name = "au1xpsc_ac97", + .id = 1, /* PSC ID. match with AC97 codec ID! */ + .num_resources = ARRAY_SIZE(au1300_psc1_res), + .resource = au1300_psc1_res, +}; + +/**********************************************************************/ + +static struct resource au1300_psc2_res[] = { + [0] = { + .start = AU1300_PSC2_PHYS_ADDR, + .end = AU1300_PSC2_PHYS_ADDR + 0x0fff, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = AU1300_PSC2_INT, + .end = AU1300_PSC2_INT, + .flags = IORESOURCE_IRQ, + }, + [2] = { + .start = AU1300_DSCR_CMD0_PSC2_TX, + .end = AU1300_DSCR_CMD0_PSC2_TX, + .flags = IORESOURCE_DMA, + }, + [3] = { + .start = AU1300_DSCR_CMD0_PSC2_RX, + .end = AU1300_DSCR_CMD0_PSC2_RX, + .flags = IORESOURCE_DMA, + }, +}; + +static struct platform_device db1300_i2s_dev = { + .name = "au1xpsc_i2s", + .id = 2, /* PSC ID */ + .num_resources = ARRAY_SIZE(au1300_psc2_res), + .resource = au1300_psc2_res, +}; + +/**********************************************************************/ + +static struct resource au1300_psc3_res[] = { + [0] = { + .start = AU1300_PSC3_PHYS_ADDR, + .end = AU1300_PSC3_PHYS_ADDR + 0x0fff, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = AU1300_PSC3_INT, + .end = AU1300_PSC3_INT, + .flags = IORESOURCE_IRQ, + }, + [2] = { + .start = AU1300_DSCR_CMD0_PSC3_TX, + .end = AU1300_DSCR_CMD0_PSC3_TX, + .flags = IORESOURCE_DMA, + }, + [3] = { + .start = AU1300_DSCR_CMD0_PSC3_RX, + .end = AU1300_DSCR_CMD0_PSC3_RX, + .flags = IORESOURCE_DMA, + }, +}; + +static struct platform_device db1300_i2c_dev = { + .name = "au1xpsc_smbus", + .id = 0, /* bus number */ + .num_resources = ARRAY_SIZE(au1300_psc3_res), + .resource = au1300_psc3_res, +}; + +/**********************************************************************/ + +/* proper key assignments when facing the LCD panel. For key assignments + * according to the schematics swap up with down and left with right. + * I chose to use it to emulate the arrow keys of a keyboard. + */ +static struct gpio_keys_button db1300_5waysw_arrowkeys[] = { + { + .code = KEY_DOWN, + .gpio = AU1300_PIN_LCDPWM0, + .type = EV_KEY, + .debounce_interval = 1, + .active_low = 1, + .desc = "5waysw-down", + }, + { + .code = KEY_UP, + .gpio = AU1300_PIN_PSC2SYNC1, + .type = EV_KEY, + .debounce_interval = 1, + .active_low = 1, + .desc = "5waysw-up", + }, + { + .code = KEY_RIGHT, + .gpio = AU1300_PIN_WAKE3, + .type = EV_KEY, + .debounce_interval = 1, + .active_low = 1, + .desc = "5waysw-right", + }, + { + .code = KEY_LEFT, + .gpio = AU1300_PIN_WAKE2, + .type = EV_KEY, + .debounce_interval = 1, + .active_low = 1, + .desc = "5waysw-left", + }, + { + .code = KEY_ENTER, + .gpio = AU1300_PIN_WAKE1, + .type = EV_KEY, + .debounce_interval = 1, + .active_low = 1, + .desc = "5waysw-push", + }, +}; + +static struct gpio_keys_platform_data db1300_5waysw_data = { + .buttons = db1300_5waysw_arrowkeys, + .nbuttons = ARRAY_SIZE(db1300_5waysw_arrowkeys), + .rep = 1, + .name = "db1300-5wayswitch", +}; + +static struct platform_device db1300_5waysw_dev = { + .name = "gpio-keys", + .dev = { + .platform_data = &db1300_5waysw_data, + }, +}; + +/**********************************************************************/ + +static struct pata_platform_info db1300_ide_info = { + .ioport_shift = DB1300_IDE_REG_SHIFT, +}; + +#define IDE_ALT_START (14 << DB1300_IDE_REG_SHIFT) +static struct resource db1300_ide_res[] = { + [0] = { + .start = DB1300_IDE_PHYS_ADDR, + .end = DB1300_IDE_PHYS_ADDR + IDE_ALT_START - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = DB1300_IDE_PHYS_ADDR + IDE_ALT_START, + .end = DB1300_IDE_PHYS_ADDR + DB1300_IDE_PHYS_LEN - 1, + .flags = IORESOURCE_MEM, + }, + [2] = { + .start = DB1300_IDE_INT, + .end = DB1300_IDE_INT, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device db1300_ide_dev = { + .dev = { + .platform_data = &db1300_ide_info, + }, + .name = "pata_platform", + .resource = db1300_ide_res, + .num_resources = ARRAY_SIZE(db1300_ide_res), +}; + +/**********************************************************************/ + +static irqreturn_t db1300_mmc_cd(int irq, void *ptr) +{ + void(*mmc_cd)(struct mmc_host *, unsigned long); + + /* disable the one currently screaming. No other way to shut it up */ + if (irq == DB1300_SD1_INSERT_INT) { + disable_irq_nosync(DB1300_SD1_INSERT_INT); + enable_irq(DB1300_SD1_EJECT_INT); + } else { + disable_irq_nosync(DB1300_SD1_EJECT_INT); + enable_irq(DB1300_SD1_INSERT_INT); + } + + /* link against CONFIG_MMC=m. We can only be called once MMC core has + * initialized the controller, so symbol_get() should always succeed. + */ + mmc_cd = symbol_get(mmc_detect_change); + mmc_cd(ptr, msecs_to_jiffies(500)); + symbol_put(mmc_detect_change); + + return IRQ_HANDLED; +} + +static int db1300_mmc_card_readonly(void *mmc_host) +{ + /* it uses SD1 interface, but the DB1200's SD0 bit in the CPLD */ + return bcsr_read(BCSR_STATUS) & BCSR_STATUS_SD0WP; +} + +static int db1300_mmc_card_inserted(void *mmc_host) +{ + return bcsr_read(BCSR_SIGSTAT) & (1 << 12); /* insertion irq signal */ +} + +static int db1300_mmc_cd_setup(void *mmc_host, int en) +{ + int ret; + + if (en) { + ret = request_irq(DB1300_SD1_INSERT_INT, db1300_mmc_cd, 0, + "sd_insert", mmc_host); + if (ret) + goto out; + + ret = request_irq(DB1300_SD1_EJECT_INT, db1300_mmc_cd, 0, + "sd_eject", mmc_host); + if (ret) { + free_irq(DB1300_SD1_INSERT_INT, mmc_host); + goto out; + } + + if (db1300_mmc_card_inserted(mmc_host)) + enable_irq(DB1300_SD1_EJECT_INT); + else + enable_irq(DB1300_SD1_INSERT_INT); + + } else { + free_irq(DB1300_SD1_INSERT_INT, mmc_host); + free_irq(DB1300_SD1_EJECT_INT, mmc_host); + } + ret = 0; +out: + return ret; +} + +static void db1300_mmcled_set(struct led_classdev *led, + enum led_brightness brightness) +{ + if (brightness != LED_OFF) + bcsr_mod(BCSR_LEDS, BCSR_LEDS_LED0, 0); + else + bcsr_mod(BCSR_LEDS, 0, BCSR_LEDS_LED0); +} + +static struct led_classdev db1300_mmc_led = { + .brightness_set = db1300_mmcled_set, +}; + +struct au1xmmc_platform_data db1300_sd1_platdata = { + .cd_setup = db1300_mmc_cd_setup, + .card_inserted = db1300_mmc_card_inserted, + .card_readonly = db1300_mmc_card_readonly, + .led = &db1300_mmc_led, +}; + +static struct resource au1300_sd1_res[] = { + [0] = { + .start = AU1300_SD1_PHYS_ADDR, + .end = AU1300_SD1_PHYS_ADDR, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = AU1300_SD1_INT, + .end = AU1300_SD1_INT, + .flags = IORESOURCE_IRQ, + }, + [2] = { + .start = AU1300_DSCR_CMD0_SDMS_TX1, + .end = AU1300_DSCR_CMD0_SDMS_TX1, + .flags = IORESOURCE_DMA, + }, + [3] = { + .start = AU1300_DSCR_CMD0_SDMS_RX1, + .end = AU1300_DSCR_CMD0_SDMS_RX1, + .flags = IORESOURCE_DMA, + }, +}; + +static struct platform_device db1300_sd1_dev = { + .dev = { + .platform_data = &db1300_sd1_platdata, + }, + .name = "au1xxx-mmc", + .id = 1, + .resource = au1300_sd1_res, + .num_resources = ARRAY_SIZE(au1300_sd1_res), +}; + +/**********************************************************************/ + +static int db1300_movinand_inserted(void *mmc_host) +{ + return 0; /* disable for now, it doesn't work yet */ +} + +static int db1300_movinand_readonly(void *mmc_host) +{ + return 0; +} + +static void db1300_movinand_led_set(struct led_classdev *led, + enum led_brightness brightness) +{ + if (brightness != LED_OFF) + bcsr_mod(BCSR_LEDS, BCSR_LEDS_LED1, 0); + else + bcsr_mod(BCSR_LEDS, 0, BCSR_LEDS_LED1); +} + +static struct led_classdev db1300_movinand_led = { + .brightness_set = db1300_movinand_led_set, +}; + +struct au1xmmc_platform_data db1300_sd0_platdata = { + .card_inserted = db1300_movinand_inserted, + .card_readonly = db1300_movinand_readonly, + .led = &db1300_movinand_led, + .mask_host_caps = MMC_CAP_NEEDS_POLL, +}; + +static struct resource au1300_sd0_res[] = { + [0] = { + .start = AU1100_SD0_PHYS_ADDR, + .end = AU1100_SD0_PHYS_ADDR, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = AU1300_SD0_INT, + .end = AU1300_SD0_INT, + .flags = IORESOURCE_IRQ, + }, + [2] = { + .start = AU1300_DSCR_CMD0_SDMS_TX0, + .end = AU1300_DSCR_CMD0_SDMS_TX0, + .flags = IORESOURCE_DMA, + }, + [3] = { + .start = AU1300_DSCR_CMD0_SDMS_RX0, + .end = AU1300_DSCR_CMD0_SDMS_RX0, + .flags = IORESOURCE_DMA, + }, +}; + +static struct platform_device db1300_sd0_dev = { + .dev = { + .platform_data = &db1300_sd0_platdata, + }, + .name = "au1xxx-mmc", + .id = 0, + .resource = au1300_sd0_res, + .num_resources = ARRAY_SIZE(au1300_sd0_res), +}; + +/**********************************************************************/ + +static struct platform_device db1300_wm9715_dev = { + .name = "wm9712-codec", + .id = 1, /* ID of PSC for AC97 audio, see asoc glue! */ +}; + +static struct platform_device db1300_ac97dma_dev = { + .name = "au1xpsc-pcm", + .id = 1, /* PSC ID */ +}; + +static struct platform_device db1300_i2sdma_dev = { + .name = "au1xpsc-pcm", + .id = 2, /* PSC ID */ +}; + +static struct platform_device db1300_sndac97_dev = { + .name = "db1300-ac97", +}; + +static struct platform_device db1300_sndi2s_dev = { + .name = "db1300-i2s", +}; + +/**********************************************************************/ + +static int db1300fb_panel_index(void) +{ + return 9; /* DB1300_800x480 */ +} + +static int db1300fb_panel_init(void) +{ + /* Apply power (Vee/Vdd logic is inverted on Panel DB1300_800x480) */ + bcsr_mod(BCSR_BOARD, BCSR_BOARD_LCDVEE | BCSR_BOARD_LCDVDD, + BCSR_BOARD_LCDBL); + return 0; +} + +static int db1300fb_panel_shutdown(void) +{ + /* Remove power (Vee/Vdd logic is inverted on Panel DB1300_800x480) */ + bcsr_mod(BCSR_BOARD, BCSR_BOARD_LCDBL, + BCSR_BOARD_LCDVEE | BCSR_BOARD_LCDVDD); + return 0; +} + +static struct au1200fb_platdata db1300fb_pd = { + .panel_index = db1300fb_panel_index, + .panel_init = db1300fb_panel_init, + .panel_shutdown = db1300fb_panel_shutdown, +}; + +static struct resource au1300_lcd_res[] = { + [0] = { + .start = AU1200_LCD_PHYS_ADDR, + .end = AU1200_LCD_PHYS_ADDR + 0x800 - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = AU1300_LCD_INT, + .end = AU1300_LCD_INT, + .flags = IORESOURCE_IRQ, + } +}; + +static u64 au1300_lcd_dmamask = DMA_BIT_MASK(32); + +static struct platform_device db1300_lcd_dev = { + .name = "au1200-lcd", + .id = 0, + .dev = { + .dma_mask = &au1300_lcd_dmamask, + .coherent_dma_mask = DMA_BIT_MASK(32), + .platform_data = &db1300fb_pd, + }, + .num_resources = ARRAY_SIZE(au1300_lcd_res), + .resource = au1300_lcd_res, +}; + +/**********************************************************************/ + +static void db1300_wm97xx_irqen(struct wm97xx *wm, int enable) +{ + if (enable) + enable_irq(DB1300_AC97_PEN_INT); + else + disable_irq_nosync(DB1300_AC97_PEN_INT); +} + +static struct wm97xx_mach_ops db1300_wm97xx_ops = { + .irq_enable = db1300_wm97xx_irqen, + .irq_gpio = WM97XX_GPIO_3, +}; + +static int db1300_wm97xx_probe(struct platform_device *pdev) +{ + struct wm97xx *wm = platform_get_drvdata(pdev); + + /* external pendown indicator */ + wm97xx_config_gpio(wm, WM97XX_GPIO_13, WM97XX_GPIO_IN, + WM97XX_GPIO_POL_LOW, WM97XX_GPIO_STICKY, + WM97XX_GPIO_WAKE); + + /* internal "virtual" pendown gpio */ + wm97xx_config_gpio(wm, WM97XX_GPIO_3, WM97XX_GPIO_OUT, + WM97XX_GPIO_POL_LOW, WM97XX_GPIO_NOTSTICKY, + WM97XX_GPIO_NOWAKE); + + wm->pen_irq = DB1300_AC97_PEN_INT; + + return wm97xx_register_mach_ops(wm, &db1300_wm97xx_ops); +} + +static struct platform_driver db1300_wm97xx_driver = { + .driver.name = "wm97xx-touch", + .driver.owner = THIS_MODULE, + .probe = db1300_wm97xx_probe, +}; + +/**********************************************************************/ + +static struct platform_device *db1300_dev[] __initdata = { + &db1300_eth_dev, + &db1300_i2c_dev, + &db1300_5waysw_dev, + &db1300_nand_dev, + &db1300_ide_dev, + &db1300_sd0_dev, + &db1300_sd1_dev, + &db1300_lcd_dev, + &db1300_ac97_dev, + &db1300_i2s_dev, + &db1300_wm9715_dev, + &db1300_ac97dma_dev, + &db1300_i2sdma_dev, + &db1300_sndac97_dev, + &db1300_sndi2s_dev, +}; + +int __init db1300_dev_setup(void) +{ + int swapped, cpldirq; + struct clk *c; + + /* setup CPLD IRQ muxer */ + cpldirq = au1300_gpio_to_irq(AU1300_PIN_EXTCLK1); + irq_set_irq_type(cpldirq, IRQ_TYPE_LEVEL_HIGH); + bcsr_init_irq(DB1300_FIRST_INT, DB1300_LAST_INT, cpldirq); + + /* insert/eject IRQs: one always triggers so don't enable them + * when doing request_irq() on them. DB1200 has this bug too. + */ + irq_set_status_flags(DB1300_SD1_INSERT_INT, IRQ_NOAUTOEN); + irq_set_status_flags(DB1300_SD1_EJECT_INT, IRQ_NOAUTOEN); + irq_set_status_flags(DB1300_CF_INSERT_INT, IRQ_NOAUTOEN); + irq_set_status_flags(DB1300_CF_EJECT_INT, IRQ_NOAUTOEN); + + /* + * setup board + */ + prom_get_ethernet_addr(&db1300_eth_config.mac[0]); + + i2c_register_board_info(0, db1300_i2c_devs, + ARRAY_SIZE(db1300_i2c_devs)); + + if (platform_driver_register(&db1300_wm97xx_driver)) + pr_warn("DB1300: failed to init touch pen irq support!\n"); + + /* Audio PSC clock is supplied by codecs (PSC1, 2) */ + __raw_writel(PSC_SEL_CLK_SERCLK, + (void __iomem *)KSEG1ADDR(AU1300_PSC1_PHYS_ADDR) + PSC_SEL_OFFSET); + wmb(); + __raw_writel(PSC_SEL_CLK_SERCLK, + (void __iomem *)KSEG1ADDR(AU1300_PSC2_PHYS_ADDR) + PSC_SEL_OFFSET); + wmb(); + /* I2C driver wants 50MHz, get as close as possible */ + c = clk_get(NULL, "psc3_intclk"); + if (!IS_ERR(c)) { + clk_set_rate(c, 50000000); + clk_prepare_enable(c); + clk_put(c); + } + __raw_writel(PSC_SEL_CLK_INTCLK, + (void __iomem *)KSEG1ADDR(AU1300_PSC3_PHYS_ADDR) + PSC_SEL_OFFSET); + wmb(); + + /* enable power to USB ports */ + bcsr_mod(BCSR_RESETS, 0, BCSR_RESETS_USBHPWR | BCSR_RESETS_OTGPWR); + + /* although it is socket #0, it uses the CPLD bits which previous boards + * have used for socket #1. + */ + db1x_register_pcmcia_socket( + AU1000_PCMCIA_ATTR_PHYS_ADDR, + AU1000_PCMCIA_ATTR_PHYS_ADDR + 0x00400000 - 1, + AU1000_PCMCIA_MEM_PHYS_ADDR, + AU1000_PCMCIA_MEM_PHYS_ADDR + 0x00400000 - 1, + AU1000_PCMCIA_IO_PHYS_ADDR, + AU1000_PCMCIA_IO_PHYS_ADDR + 0x00010000 - 1, + DB1300_CF_INT, DB1300_CF_INSERT_INT, 0, DB1300_CF_EJECT_INT, 1); + + swapped = bcsr_read(BCSR_STATUS) & BCSR_STATUS_DB1200_SWAPBOOT; + db1x_register_norflash(64 << 20, 2, swapped); + + return platform_add_devices(db1300_dev, ARRAY_SIZE(db1300_dev)); +} + + +int __init db1300_board_setup(void) +{ + unsigned short whoami; + + bcsr_init(DB1300_BCSR_PHYS_ADDR, + DB1300_BCSR_PHYS_ADDR + DB1300_BCSR_HEXLED_OFS); + + whoami = bcsr_read(BCSR_WHOAMI); + if (BCSR_WHOAMI_BOARD(whoami) != BCSR_WHOAMI_DB1300) + return -ENODEV; + + db1300_gpio_config(); + + printk(KERN_INFO "NetLogic DBAu1300 Development Platform.\n\t" + "BoardID %d CPLD Rev %d DaughtercardID %d\n", + BCSR_WHOAMI_BOARD(whoami), BCSR_WHOAMI_CPLD(whoami), + BCSR_WHOAMI_DCID(whoami)); + + /* enable UARTs, YAMON only enables #2 */ + alchemy_uart_enable(AU1300_UART0_PHYS_ADDR); + alchemy_uart_enable(AU1300_UART1_PHYS_ADDR); + alchemy_uart_enable(AU1300_UART3_PHYS_ADDR); + + return 0; +} |