diff options
Diffstat (limited to 'arch/mips/bcm47xx/setup.c')
| -rw-r--r-- | arch/mips/bcm47xx/setup.c | 272 |
1 files changed, 272 insertions, 0 deletions
diff --git a/arch/mips/bcm47xx/setup.c b/arch/mips/bcm47xx/setup.c new file mode 100644 index 000000000..82ff9fd2a --- /dev/null +++ b/arch/mips/bcm47xx/setup.c @@ -0,0 +1,272 @@ +/* + * Copyright (C) 2004 Florian Schirmer <jolt@tuxbox.org> + * Copyright (C) 2006 Felix Fietkau <nbd@openwrt.org> + * Copyright (C) 2006 Michael Buesch <m@bues.ch> + * Copyright (C) 2010 Waldemar Brodkorb <wbx@openadk.org> + * Copyright (C) 2010-2012 Hauke Mehrtens <hauke@hauke-m.de> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN + * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT + * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF + * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON + * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF + * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include "bcm47xx_private.h" + +#include <linux/export.h> +#include <linux/types.h> +#include <linux/ethtool.h> +#include <linux/phy.h> +#include <linux/phy_fixed.h> +#include <linux/ssb/ssb.h> +#include <linux/ssb/ssb_embedded.h> +#include <linux/bcma/bcma_soc.h> +#include <asm/bootinfo.h> +#include <asm/idle.h> +#include <asm/prom.h> +#include <asm/reboot.h> +#include <asm/time.h> +#include <bcm47xx.h> +#include <bcm47xx_board.h> + +union bcm47xx_bus bcm47xx_bus; +EXPORT_SYMBOL(bcm47xx_bus); + +enum bcm47xx_bus_type bcm47xx_bus_type; +EXPORT_SYMBOL(bcm47xx_bus_type); + +static void bcm47xx_machine_restart(char *command) +{ + pr_alert("Please stand by while rebooting the system...\n"); + local_irq_disable(); + /* Set the watchdog timer to reset immediately */ + switch (bcm47xx_bus_type) { +#ifdef CONFIG_BCM47XX_SSB + case BCM47XX_BUS_TYPE_SSB: + if (bcm47xx_bus.ssb.chip_id == 0x4785) + write_c0_diag4(1 << 22); + ssb_watchdog_timer_set(&bcm47xx_bus.ssb, 1); + if (bcm47xx_bus.ssb.chip_id == 0x4785) { + __asm__ __volatile__( + ".set\tmips3\n\t" + "sync\n\t" + "wait\n\t" + ".set\tmips0"); + } + break; +#endif +#ifdef CONFIG_BCM47XX_BCMA + case BCM47XX_BUS_TYPE_BCMA: + bcma_chipco_watchdog_timer_set(&bcm47xx_bus.bcma.bus.drv_cc, 1); + break; +#endif + } + while (1) + cpu_relax(); +} + +static void bcm47xx_machine_halt(void) +{ + /* Disable interrupts and watchdog and spin forever */ + local_irq_disable(); + switch (bcm47xx_bus_type) { +#ifdef CONFIG_BCM47XX_SSB + case BCM47XX_BUS_TYPE_SSB: + ssb_watchdog_timer_set(&bcm47xx_bus.ssb, 0); + break; +#endif +#ifdef CONFIG_BCM47XX_BCMA + case BCM47XX_BUS_TYPE_BCMA: + bcma_chipco_watchdog_timer_set(&bcm47xx_bus.bcma.bus.drv_cc, 0); + break; +#endif + } + while (1) + cpu_relax(); +} + +#ifdef CONFIG_BCM47XX_SSB +static int bcm47xx_get_invariants(struct ssb_bus *bus, + struct ssb_init_invariants *iv) +{ + char buf[20]; + + /* Fill boardinfo structure */ + memset(&iv->boardinfo, 0 , sizeof(struct ssb_boardinfo)); + + bcm47xx_fill_ssb_boardinfo(&iv->boardinfo, NULL); + + memset(&iv->sprom, 0, sizeof(struct ssb_sprom)); + bcm47xx_fill_sprom(&iv->sprom, NULL, false); + + if (bcm47xx_nvram_getenv("cardbus", buf, sizeof(buf)) >= 0) + iv->has_cardbus_slot = !!simple_strtoul(buf, NULL, 10); + + return 0; +} + +static void __init bcm47xx_register_ssb(void) +{ + int err; + char buf[100]; + struct ssb_mipscore *mcore; + + err = ssb_bus_ssbbus_register(&bcm47xx_bus.ssb, SSB_ENUM_BASE, + bcm47xx_get_invariants); + if (err) + panic("Failed to initialize SSB bus (err %d)", err); + + mcore = &bcm47xx_bus.ssb.mipscore; + if (bcm47xx_nvram_getenv("kernel_args", buf, sizeof(buf)) >= 0) { + if (strstr(buf, "console=ttyS1")) { + struct ssb_serial_port port; + + pr_debug("Swapping serial ports!\n"); + /* swap serial ports */ + memcpy(&port, &mcore->serial_ports[0], sizeof(port)); + memcpy(&mcore->serial_ports[0], &mcore->serial_ports[1], + sizeof(port)); + memcpy(&mcore->serial_ports[1], &port, sizeof(port)); + } + } +} +#endif + +#ifdef CONFIG_BCM47XX_BCMA +static void __init bcm47xx_register_bcma(void) +{ + int err; + + err = bcma_host_soc_register(&bcm47xx_bus.bcma); + if (err) + panic("Failed to register BCMA bus (err %d)", err); +} +#endif + +/* + * Memory setup is done in the early part of MIPS's arch_mem_init. It's supposed + * to detect memory and record it with add_memory_region. + * Any extra initializaion performed here must not use kmalloc or bootmem. + */ +void __init plat_mem_setup(void) +{ + struct cpuinfo_mips *c = ¤t_cpu_data; + + if ((c->cputype == CPU_74K) || (c->cputype == CPU_1074K)) { + pr_info("Using bcma bus\n"); +#ifdef CONFIG_BCM47XX_BCMA + bcm47xx_bus_type = BCM47XX_BUS_TYPE_BCMA; + bcm47xx_sprom_register_fallbacks(); + bcm47xx_register_bcma(); + bcm47xx_set_system_type(bcm47xx_bus.bcma.bus.chipinfo.id); +#ifdef CONFIG_HIGHMEM + bcm47xx_prom_highmem_init(); +#endif +#endif + } else { + pr_info("Using ssb bus\n"); +#ifdef CONFIG_BCM47XX_SSB + bcm47xx_bus_type = BCM47XX_BUS_TYPE_SSB; + bcm47xx_sprom_register_fallbacks(); + bcm47xx_register_ssb(); + bcm47xx_set_system_type(bcm47xx_bus.ssb.chip_id); +#endif + } + + _machine_restart = bcm47xx_machine_restart; + _machine_halt = bcm47xx_machine_halt; + pm_power_off = bcm47xx_machine_halt; +} + +/* + * This finishes bus initialization doing things that were not possible without + * kmalloc. Make sure to call it late enough (after mm_init). + */ +void __init bcm47xx_bus_setup(void) +{ +#ifdef CONFIG_BCM47XX_BCMA + if (bcm47xx_bus_type == BCM47XX_BUS_TYPE_BCMA) { + int err; + + err = bcma_host_soc_init(&bcm47xx_bus.bcma); + if (err) + panic("Failed to initialize BCMA bus (err %d)", err); + + bcm47xx_fill_bcma_boardinfo(&bcm47xx_bus.bcma.bus.boardinfo, + NULL); + } +#endif + + /* With bus initialized we can access NVRAM and detect the board */ + bcm47xx_board_detect(); + mips_set_machine_name(bcm47xx_board_get_name()); +} + +static int __init bcm47xx_cpu_fixes(void) +{ + switch (bcm47xx_bus_type) { +#ifdef CONFIG_BCM47XX_SSB + case BCM47XX_BUS_TYPE_SSB: + /* Nothing to do */ + break; +#endif +#ifdef CONFIG_BCM47XX_BCMA + case BCM47XX_BUS_TYPE_BCMA: + /* The BCM4706 has a problem with the CPU wait instruction. + * When r4k_wait or r4k_wait_irqoff is used will just hang and + * not return from a msleep(). Removing the cpu_wait + * functionality is a workaround for this problem. The BCM4716 + * does not have this problem. + */ + if (bcm47xx_bus.bcma.bus.chipinfo.id == BCMA_CHIP_ID_BCM4706) + cpu_wait = NULL; + break; +#endif + } + return 0; +} +arch_initcall(bcm47xx_cpu_fixes); + +static struct fixed_phy_status bcm47xx_fixed_phy_status __initdata = { + .link = 1, + .speed = SPEED_100, + .duplex = DUPLEX_FULL, +}; + +static int __init bcm47xx_register_bus_complete(void) +{ + switch (bcm47xx_bus_type) { +#ifdef CONFIG_BCM47XX_SSB + case BCM47XX_BUS_TYPE_SSB: + /* Nothing to do */ + break; +#endif +#ifdef CONFIG_BCM47XX_BCMA + case BCM47XX_BUS_TYPE_BCMA: + bcma_bus_register(&bcm47xx_bus.bcma.bus); + break; +#endif + } + bcm47xx_buttons_register(); + bcm47xx_leds_register(); + bcm47xx_workarounds(); + + fixed_phy_add(PHY_POLL, 0, &bcm47xx_fixed_phy_status); + return 0; +} +device_initcall(bcm47xx_register_bus_complete); |