summaryrefslogtreecommitdiff
path: root/arch/mips/sni
diff options
context:
space:
mode:
Diffstat (limited to 'arch/mips/sni')
-rw-r--r--arch/mips/sni/Makefile6
-rw-r--r--arch/mips/sni/Platform11
-rw-r--r--arch/mips/sni/a20r.c249
-rw-r--r--arch/mips/sni/eisa.c50
-rw-r--r--arch/mips/sni/irq.c82
-rw-r--r--arch/mips/sni/pcimt.c332
-rw-r--r--arch/mips/sni/pcit.c291
-rw-r--r--arch/mips/sni/reset.c45
-rw-r--r--arch/mips/sni/rm200.c490
-rw-r--r--arch/mips/sni/setup.c263
-rw-r--r--arch/mips/sni/time.c190
11 files changed, 2009 insertions, 0 deletions
diff --git a/arch/mips/sni/Makefile b/arch/mips/sni/Makefile
new file mode 100644
index 000000000..9d3bad320
--- /dev/null
+++ b/arch/mips/sni/Makefile
@@ -0,0 +1,6 @@
+#
+# Makefile for the SNI specific part of the kernel
+#
+
+obj-y += irq.o reset.o setup.o a20r.o rm200.o pcimt.o pcit.o time.o
+obj-$(CONFIG_EISA) += eisa.o
diff --git a/arch/mips/sni/Platform b/arch/mips/sni/Platform
new file mode 100644
index 000000000..2644a9d63
--- /dev/null
+++ b/arch/mips/sni/Platform
@@ -0,0 +1,11 @@
+#
+# SNI RM
+#
+platform-$(CONFIG_SNI_RM) += sni/
+cflags-$(CONFIG_SNI_RM) += -I$(srctree)/arch/mips/include/asm/mach-rm
+ifdef CONFIG_CPU_LITTLE_ENDIAN
+load-$(CONFIG_SNI_RM) += 0xffffffff80600000
+else
+load-$(CONFIG_SNI_RM) += 0xffffffff80030000
+endif
+all-$(CONFIG_SNI_RM) := $(COMPRESSION_FNAME).ecoff
diff --git a/arch/mips/sni/a20r.c b/arch/mips/sni/a20r.c
new file mode 100644
index 000000000..f9407e170
--- /dev/null
+++ b/arch/mips/sni/a20r.c
@@ -0,0 +1,249 @@
+/*
+ * A20R specific code
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2006 Thomas Bogendoerfer (tsbogend@alpha.franken.de)
+ */
+
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/platform_device.h>
+#include <linux/serial_8250.h>
+
+#include <asm/sni.h>
+#include <asm/time.h>
+
+#define PORT(_base,_irq) \
+ { \
+ .iobase = _base, \
+ .irq = _irq, \
+ .uartclk = 1843200, \
+ .iotype = UPIO_PORT, \
+ .flags = UPF_BOOT_AUTOCONF, \
+ }
+
+static struct plat_serial8250_port a20r_data[] = {
+ PORT(0x3f8, 4),
+ PORT(0x2f8, 3),
+ { },
+};
+
+static struct platform_device a20r_serial8250_device = {
+ .name = "serial8250",
+ .id = PLAT8250_DEV_PLATFORM,
+ .dev = {
+ .platform_data = a20r_data,
+ },
+};
+
+static struct resource a20r_ds1216_rsrc[] = {
+ {
+ .start = 0x1c081ffc,
+ .end = 0x1c081fff,
+ .flags = IORESOURCE_MEM
+ }
+};
+
+static struct platform_device a20r_ds1216_device = {
+ .name = "rtc-ds1216",
+ .num_resources = ARRAY_SIZE(a20r_ds1216_rsrc),
+ .resource = a20r_ds1216_rsrc
+};
+
+static struct resource snirm_82596_rsrc[] = {
+ {
+ .start = 0x18000000,
+ .end = 0x18000004,
+ .flags = IORESOURCE_MEM
+ },
+ {
+ .start = 0x18010000,
+ .end = 0x18010004,
+ .flags = IORESOURCE_MEM
+ },
+ {
+ .start = 0x1ff00000,
+ .end = 0x1ff00020,
+ .flags = IORESOURCE_MEM
+ },
+ {
+ .start = 22,
+ .end = 22,
+ .flags = IORESOURCE_IRQ
+ },
+ {
+ .flags = 0x01 /* 16bit mpu port access */
+ }
+};
+
+static struct platform_device snirm_82596_pdev = {
+ .name = "snirm_82596",
+ .num_resources = ARRAY_SIZE(snirm_82596_rsrc),
+ .resource = snirm_82596_rsrc
+};
+
+static struct resource snirm_53c710_rsrc[] = {
+ {
+ .start = 0x19000000,
+ .end = 0x190fffff,
+ .flags = IORESOURCE_MEM
+ },
+ {
+ .start = 19,
+ .end = 19,
+ .flags = IORESOURCE_IRQ
+ }
+};
+
+static struct platform_device snirm_53c710_pdev = {
+ .name = "snirm_53c710",
+ .num_resources = ARRAY_SIZE(snirm_53c710_rsrc),
+ .resource = snirm_53c710_rsrc
+};
+
+static struct resource sc26xx_rsrc[] = {
+ {
+ .start = 0x1c070000,
+ .end = 0x1c0700ff,
+ .flags = IORESOURCE_MEM
+ },
+ {
+ .start = 20,
+ .end = 20,
+ .flags = IORESOURCE_IRQ
+ }
+};
+
+#include <linux/platform_data/serial-sccnxp.h>
+
+static struct sccnxp_pdata sccnxp_data = {
+ .reg_shift = 2,
+ .mctrl_cfg[0] = MCTRL_SIG(DTR_OP, LINE_OP7) |
+ MCTRL_SIG(RTS_OP, LINE_OP3) |
+ MCTRL_SIG(DSR_IP, LINE_IP5) |
+ MCTRL_SIG(DCD_IP, LINE_IP6),
+ .mctrl_cfg[1] = MCTRL_SIG(DTR_OP, LINE_OP2) |
+ MCTRL_SIG(RTS_OP, LINE_OP1) |
+ MCTRL_SIG(DSR_IP, LINE_IP0) |
+ MCTRL_SIG(CTS_IP, LINE_IP1) |
+ MCTRL_SIG(DCD_IP, LINE_IP2) |
+ MCTRL_SIG(RNG_IP, LINE_IP3),
+};
+
+static struct platform_device sc26xx_pdev = {
+ .name = "sc2681",
+ .resource = sc26xx_rsrc,
+ .num_resources = ARRAY_SIZE(sc26xx_rsrc),
+ .dev = {
+ .platform_data = &sccnxp_data,
+ },
+};
+
+static u32 a20r_ack_hwint(void)
+{
+ u32 status = read_c0_status();
+
+ write_c0_status(status | 0x00010000);
+ asm volatile(
+ " .set push \n"
+ " .set noat \n"
+ " .set noreorder \n"
+ " lw $1, 0(%0) \n"
+ " sb $0, 0(%1) \n"
+ " sync \n"
+ " lb %1, 0(%1) \n"
+ " b 1f \n"
+ " ori %1, $1, 2 \n"
+ " .align 8 \n"
+ "1: \n"
+ " nop \n"
+ " sw %1, 0(%0) \n"
+ " sync \n"
+ " li %1, 0x20 \n"
+ "2: \n"
+ " nop \n"
+ " bnez %1,2b \n"
+ " addiu %1, -1 \n"
+ " sw $1, 0(%0) \n"
+ " sync \n"
+ ".set pop \n"
+ :
+ : "Jr" (PCIMT_UCONF), "Jr" (0xbc000000));
+ write_c0_status(status);
+
+ return status;
+}
+
+static inline void unmask_a20r_irq(struct irq_data *d)
+{
+ set_c0_status(0x100 << (d->irq - SNI_A20R_IRQ_BASE));
+ irq_enable_hazard();
+}
+
+static inline void mask_a20r_irq(struct irq_data *d)
+{
+ clear_c0_status(0x100 << (d->irq - SNI_A20R_IRQ_BASE));
+ irq_disable_hazard();
+}
+
+static struct irq_chip a20r_irq_type = {
+ .name = "A20R",
+ .irq_mask = mask_a20r_irq,
+ .irq_unmask = unmask_a20r_irq,
+};
+
+/*
+ * hwint 0 receive all interrupts
+ */
+static void a20r_hwint(void)
+{
+ u32 cause, status;
+ int irq;
+
+ clear_c0_status(IE_IRQ0);
+ status = a20r_ack_hwint();
+ cause = read_c0_cause();
+
+ irq = ffs(((cause & status) >> 8) & 0xf8);
+ if (likely(irq > 0))
+ do_IRQ(SNI_A20R_IRQ_BASE + irq - 1);
+ set_c0_status(IE_IRQ0);
+}
+
+void __init sni_a20r_irq_init(void)
+{
+ int i;
+
+ for (i = SNI_A20R_IRQ_BASE + 2 ; i < SNI_A20R_IRQ_BASE + 8; i++)
+ irq_set_chip_and_handler(i, &a20r_irq_type, handle_level_irq);
+ sni_hwint = a20r_hwint;
+ change_c0_status(ST0_IM, IE_IRQ0);
+ setup_irq(SNI_A20R_IRQ_BASE + 3, &sni_isa_irq);
+}
+
+void sni_a20r_init(void)
+{
+ /* FIXME, remove if not needed */
+}
+
+static int __init snirm_a20r_setup_devinit(void)
+{
+ switch (sni_brd_type) {
+ case SNI_BRD_TOWER_OASIC:
+ case SNI_BRD_MINITOWER:
+ platform_device_register(&snirm_82596_pdev);
+ platform_device_register(&snirm_53c710_pdev);
+ platform_device_register(&sc26xx_pdev);
+ platform_device_register(&a20r_serial8250_device);
+ platform_device_register(&a20r_ds1216_device);
+ sni_eisa_root_init();
+ break;
+ }
+ return 0;
+}
+
+device_initcall(snirm_a20r_setup_devinit);
diff --git a/arch/mips/sni/eisa.c b/arch/mips/sni/eisa.c
new file mode 100644
index 000000000..179b5d556
--- /dev/null
+++ b/arch/mips/sni/eisa.c
@@ -0,0 +1,50 @@
+/*
+ * Virtual EISA root driver.
+ * Acts as a placeholder if we don't have a proper EISA bridge.
+ *
+ * (C) 2003 Marc Zyngier <maz@wild-wind.fr.eu.org>
+ * modified for SNI usage by Thomas Bogendoerfer
+ *
+ * This code is released under the GPL version 2.
+ */
+
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+#include <linux/eisa.h>
+#include <linux/init.h>
+
+/* The default EISA device parent (virtual root device).
+ * Now use a platform device, since that's the obvious choice. */
+
+static struct platform_device eisa_root_dev = {
+ .name = "eisa",
+ .id = 0,
+};
+
+static struct eisa_root_device eisa_bus_root = {
+ .dev = &eisa_root_dev.dev,
+ .bus_base_addr = 0,
+ .res = &ioport_resource,
+ .slots = EISA_MAX_SLOTS,
+ .dma_mask = 0xffffffff,
+ .force_probe = 1,
+};
+
+int __init sni_eisa_root_init(void)
+{
+ int r;
+
+ r = platform_device_register(&eisa_root_dev);
+ if (!r)
+ return r;
+
+ dev_set_drvdata(&eisa_root_dev.dev, &eisa_bus_root);
+
+ if (eisa_root_register(&eisa_bus_root)) {
+ /* A real bridge may have been registered before
+ * us. So quietly unregister. */
+ platform_device_unregister(&eisa_root_dev);
+ return -1;
+ }
+ return 0;
+}
diff --git a/arch/mips/sni/irq.c b/arch/mips/sni/irq.c
new file mode 100644
index 000000000..ac61b90bc
--- /dev/null
+++ b/arch/mips/sni/irq.c
@@ -0,0 +1,82 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1992 Linus Torvalds
+ * Copyright (C) 1994 - 2000 Ralf Baechle
+ * Copyright (C) 2006 Thomas Bogendoerfer
+ */
+#include <linux/delay.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/kernel.h>
+
+#include <asm/i8259.h>
+#include <asm/io.h>
+#include <asm/sni.h>
+#include <asm/irq.h>
+#include <asm/irq_cpu.h>
+
+void (*sni_hwint)(void);
+
+asmlinkage void plat_irq_dispatch(void)
+{
+ sni_hwint();
+}
+
+/* ISA irq handler */
+static irqreturn_t sni_isa_irq_handler(int dummy, void *p)
+{
+ int irq;
+
+ irq = i8259_irq();
+ if (unlikely(irq < 0))
+ return IRQ_NONE;
+
+ generic_handle_irq(irq);
+ return IRQ_HANDLED;
+}
+
+struct irqaction sni_isa_irq = {
+ .handler = sni_isa_irq_handler,
+ .name = "ISA",
+ .flags = IRQF_SHARED
+};
+
+/*
+ * On systems with i8259-style interrupt controllers we assume for
+ * driver compatibility reasons interrupts 0 - 15 to be the i8295
+ * interrupts even if the hardware uses a different interrupt numbering.
+ */
+void __init arch_init_irq(void)
+{
+ init_i8259_irqs(); /* Integrated i8259 */
+ switch (sni_brd_type) {
+ case SNI_BRD_10:
+ case SNI_BRD_10NEW:
+ case SNI_BRD_TOWER_OASIC:
+ case SNI_BRD_MINITOWER:
+ sni_a20r_irq_init();
+ break;
+
+ case SNI_BRD_PCI_TOWER:
+ sni_pcit_irq_init();
+ break;
+
+ case SNI_BRD_PCI_TOWER_CPLUS:
+ sni_pcit_cplus_irq_init();
+ break;
+
+ case SNI_BRD_RM200:
+ sni_rm200_irq_init();
+ break;
+
+ case SNI_BRD_PCI_MTOWER:
+ case SNI_BRD_PCI_DESKTOP:
+ case SNI_BRD_PCI_MTOWER_CPLUS:
+ sni_pcimt_irq_init();
+ break;
+ }
+}
diff --git a/arch/mips/sni/pcimt.c b/arch/mips/sni/pcimt.c
new file mode 100644
index 000000000..12336c2a6
--- /dev/null
+++ b/arch/mips/sni/pcimt.c
@@ -0,0 +1,332 @@
+/*
+ * PCIMT specific code
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1996, 97, 98, 2000, 03, 04, 06 Ralf Baechle (ralf@linux-mips.org)
+ * Copyright (C) 2006,2007 Thomas Bogendoerfer (tsbogend@alpha.franken.de)
+ */
+
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/pci.h>
+#include <linux/serial_8250.h>
+
+#include <asm/sni.h>
+#include <asm/time.h>
+#include <asm/i8259.h>
+#include <asm/irq_cpu.h>
+
+#define cacheconf (*(volatile unsigned int *)PCIMT_CACHECONF)
+#define invspace (*(volatile unsigned int *)PCIMT_INVSPACE)
+
+static void __init sni_pcimt_sc_init(void)
+{
+ unsigned int scsiz, sc_size;
+
+ scsiz = cacheconf & 7;
+ if (scsiz == 0) {
+ printk("Second level cache is deactivated.\n");
+ return;
+ }
+ if (scsiz >= 6) {
+ printk("Invalid second level cache size configured, "
+ "deactivating second level cache.\n");
+ cacheconf = 0;
+ return;
+ }
+
+ sc_size = 128 << scsiz;
+ printk("%dkb second level cache detected, deactivating.\n", sc_size);
+ cacheconf = 0;
+}
+
+
+/*
+ * A bit more gossip about the iron we're running on ...
+ */
+static inline void sni_pcimt_detect(void)
+{
+ char boardtype[80];
+ unsigned char csmsr;
+ char *p = boardtype;
+ unsigned int asic;
+
+ csmsr = *(volatile unsigned char *)PCIMT_CSMSR;
+
+ p += sprintf(p, "%s PCI", (csmsr & 0x80) ? "RM200" : "RM300");
+ if ((csmsr & 0x80) == 0)
+ p += sprintf(p, ", board revision %s",
+ (csmsr & 0x20) ? "D" : "C");
+ asic = csmsr & 0x80;
+ asic = (csmsr & 0x08) ? asic : !asic;
+ p += sprintf(p, ", ASIC PCI Rev %s", asic ? "1.0" : "1.1");
+ printk("%s.\n", boardtype);
+}
+
+#define PORT(_base,_irq) \
+ { \
+ .iobase = _base, \
+ .irq = _irq, \
+ .uartclk = 1843200, \
+ .iotype = UPIO_PORT, \
+ .flags = UPF_BOOT_AUTOCONF, \
+ }
+
+static struct plat_serial8250_port pcimt_data[] = {
+ PORT(0x3f8, 4),
+ PORT(0x2f8, 3),
+ { },
+};
+
+static struct platform_device pcimt_serial8250_device = {
+ .name = "serial8250",
+ .id = PLAT8250_DEV_PLATFORM,
+ .dev = {
+ .platform_data = pcimt_data,
+ },
+};
+
+static struct resource pcimt_cmos_rsrc[] = {
+ {
+ .start = 0x70,
+ .end = 0x71,
+ .flags = IORESOURCE_IO
+ },
+ {
+ .start = 8,
+ .end = 8,
+ .flags = IORESOURCE_IRQ
+ }
+};
+
+static struct platform_device pcimt_cmos_device = {
+ .name = "rtc_cmos",
+ .num_resources = ARRAY_SIZE(pcimt_cmos_rsrc),
+ .resource = pcimt_cmos_rsrc
+};
+
+
+static struct resource sni_io_resource = {
+ .start = 0x00000000UL,
+ .end = 0x03bfffffUL,
+ .name = "PCIMT IO MEM",
+ .flags = IORESOURCE_IO,
+};
+
+static struct resource pcimt_io_resources[] = {
+ {
+ .start = 0x00,
+ .end = 0x1f,
+ .name = "dma1",
+ .flags = IORESOURCE_BUSY
+ }, {
+ .start = 0x40,
+ .end = 0x5f,
+ .name = "timer",
+ .flags = IORESOURCE_BUSY
+ }, {
+ .start = 0x60,
+ .end = 0x6f,
+ .name = "keyboard",
+ .flags = IORESOURCE_BUSY
+ }, {
+ .start = 0x80,
+ .end = 0x8f,
+ .name = "dma page reg",
+ .flags = IORESOURCE_BUSY
+ }, {
+ .start = 0xc0,
+ .end = 0xdf,
+ .name = "dma2",
+ .flags = IORESOURCE_BUSY
+ }, {
+ .start = 0xcfc,
+ .end = 0xcff,
+ .name = "PCI config data",
+ .flags = IORESOURCE_BUSY
+ }
+};
+
+static struct resource pcimt_mem_resources[] = {
+ {
+ /*
+ * this region should only be 4 bytes long,
+ * but it's 16MB on all RM300C I've checked
+ */
+ .start = 0x1a000000,
+ .end = 0x1affffff,
+ .name = "PCI INT ACK",
+ .flags = IORESOURCE_BUSY
+ }
+};
+
+static struct resource sni_mem_resource = {
+ .start = 0x18000000UL,
+ .end = 0x1fbfffffUL,
+ .name = "PCIMT PCI MEM",
+ .flags = IORESOURCE_MEM
+};
+
+static void __init sni_pcimt_resource_init(void)
+{
+ int i;
+
+ /* request I/O space for devices used on all i[345]86 PCs */
+ for (i = 0; i < ARRAY_SIZE(pcimt_io_resources); i++)
+ request_resource(&sni_io_resource, pcimt_io_resources + i);
+ /* request MEM space for devices used on all i[345]86 PCs */
+ for (i = 0; i < ARRAY_SIZE(pcimt_mem_resources); i++)
+ request_resource(&sni_mem_resource, pcimt_mem_resources + i);
+}
+
+extern struct pci_ops sni_pcimt_ops;
+
+#ifdef CONFIG_PCI
+static struct pci_controller sni_controller = {
+ .pci_ops = &sni_pcimt_ops,
+ .mem_resource = &sni_mem_resource,
+ .mem_offset = 0x00000000UL,
+ .io_resource = &sni_io_resource,
+ .io_offset = 0x00000000UL,
+ .io_map_base = SNI_PORT_BASE
+};
+#endif
+
+static void enable_pcimt_irq(struct irq_data *d)
+{
+ unsigned int mask = 1 << (d->irq - PCIMT_IRQ_INT2);
+
+ *(volatile u8 *) PCIMT_IRQSEL |= mask;
+}
+
+void disable_pcimt_irq(struct irq_data *d)
+{
+ unsigned int mask = ~(1 << (d->irq - PCIMT_IRQ_INT2));
+
+ *(volatile u8 *) PCIMT_IRQSEL &= mask;
+}
+
+static struct irq_chip pcimt_irq_type = {
+ .name = "PCIMT",
+ .irq_mask = disable_pcimt_irq,
+ .irq_unmask = enable_pcimt_irq,
+};
+
+/*
+ * hwint0 should deal with MP agent, ASIC PCI, EISA NMI and debug
+ * button interrupts. Later ...
+ */
+static void pcimt_hwint0(void)
+{
+ panic("Received int0 but no handler yet ...");
+}
+
+/*
+ * hwint 1 deals with EISA and SCSI interrupts,
+ *
+ * The EISA_INT bit in CSITPEND is high active, all others are low active.
+ */
+static void pcimt_hwint1(void)
+{
+ u8 pend = *(volatile char *)PCIMT_CSITPEND;
+ unsigned long flags;
+
+ if (pend & IT_EISA) {
+ int irq;
+ /*
+ * Note: ASIC PCI's builtin interrupt acknowledge feature is
+ * broken. Using it may result in loss of some or all i8259
+ * interrupts, so don't use PCIMT_INT_ACKNOWLEDGE ...
+ */
+ irq = i8259_irq();
+ if (unlikely(irq < 0))
+ return;
+
+ do_IRQ(irq);
+ }
+
+ if (!(pend & IT_SCSI)) {
+ flags = read_c0_status();
+ clear_c0_status(ST0_IM);
+ do_IRQ(PCIMT_IRQ_SCSI);
+ write_c0_status(flags);
+ }
+}
+
+/*
+ * hwint 3 should deal with the PCI A - D interrupts,
+ */
+static void pcimt_hwint3(void)
+{
+ u8 pend = *(volatile char *)PCIMT_CSITPEND;
+ int irq;
+
+ pend &= (IT_INTA | IT_INTB | IT_INTC | IT_INTD);
+ pend ^= (IT_INTA | IT_INTB | IT_INTC | IT_INTD);
+ clear_c0_status(IE_IRQ3);
+ irq = PCIMT_IRQ_INT2 + ffs(pend) - 1;
+ do_IRQ(irq);
+ set_c0_status(IE_IRQ3);
+}
+
+static void sni_pcimt_hwint(void)
+{
+ u32 pending = read_c0_cause() & read_c0_status();
+
+ if (pending & C_IRQ5)
+ do_IRQ(MIPS_CPU_IRQ_BASE + 7);
+ else if (pending & C_IRQ4)
+ do_IRQ(MIPS_CPU_IRQ_BASE + 6);
+ else if (pending & C_IRQ3)
+ pcimt_hwint3();
+ else if (pending & C_IRQ1)
+ pcimt_hwint1();
+ else if (pending & C_IRQ0) {
+ pcimt_hwint0();
+ }
+}
+
+void __init sni_pcimt_irq_init(void)
+{
+ int i;
+
+ *(volatile u8 *) PCIMT_IRQSEL = IT_ETH | IT_EISA;
+ mips_cpu_irq_init();
+ /* Actually we've got more interrupts to handle ... */
+ for (i = PCIMT_IRQ_INT2; i <= PCIMT_IRQ_SCSI; i++)
+ irq_set_chip_and_handler(i, &pcimt_irq_type, handle_level_irq);
+ sni_hwint = sni_pcimt_hwint;
+ change_c0_status(ST0_IM, IE_IRQ1|IE_IRQ3);
+}
+
+void __init sni_pcimt_init(void)
+{
+ sni_pcimt_detect();
+ sni_pcimt_sc_init();
+ ioport_resource.end = sni_io_resource.end;
+#ifdef CONFIG_PCI
+ PCIBIOS_MIN_IO = 0x9000;
+ register_pci_controller(&sni_controller);
+#endif
+ sni_pcimt_resource_init();
+}
+
+static int __init snirm_pcimt_setup_devinit(void)
+{
+ switch (sni_brd_type) {
+ case SNI_BRD_PCI_MTOWER:
+ case SNI_BRD_PCI_DESKTOP:
+ case SNI_BRD_PCI_MTOWER_CPLUS:
+ platform_device_register(&pcimt_serial8250_device);
+ platform_device_register(&pcimt_cmos_device);
+ break;
+ }
+
+ return 0;
+}
+
+device_initcall(snirm_pcimt_setup_devinit);
diff --git a/arch/mips/sni/pcit.c b/arch/mips/sni/pcit.c
new file mode 100644
index 000000000..05bb51676
--- /dev/null
+++ b/arch/mips/sni/pcit.c
@@ -0,0 +1,291 @@
+/*
+ * PCI Tower specific code
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2006 Thomas Bogendoerfer (tsbogend@alpha.franken.de)
+ */
+
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/pci.h>
+#include <linux/serial_8250.h>
+
+#include <asm/sni.h>
+#include <asm/time.h>
+#include <asm/irq_cpu.h>
+
+
+#define PORT(_base,_irq) \
+ { \
+ .iobase = _base, \
+ .irq = _irq, \
+ .uartclk = 1843200, \
+ .iotype = UPIO_PORT, \
+ .flags = UPF_BOOT_AUTOCONF, \
+ }
+
+static struct plat_serial8250_port pcit_data[] = {
+ PORT(0x3f8, 0),
+ PORT(0x2f8, 3),
+ { },
+};
+
+static struct platform_device pcit_serial8250_device = {
+ .name = "serial8250",
+ .id = PLAT8250_DEV_PLATFORM,
+ .dev = {
+ .platform_data = pcit_data,
+ },
+};
+
+static struct plat_serial8250_port pcit_cplus_data[] = {
+ PORT(0x3f8, 0),
+ PORT(0x2f8, 3),
+ PORT(0x3e8, 4),
+ PORT(0x2e8, 3),
+ { },
+};
+
+static struct platform_device pcit_cplus_serial8250_device = {
+ .name = "serial8250",
+ .id = PLAT8250_DEV_PLATFORM,
+ .dev = {
+ .platform_data = pcit_cplus_data,
+ },
+};
+
+static struct resource pcit_cmos_rsrc[] = {
+ {
+ .start = 0x70,
+ .end = 0x71,
+ .flags = IORESOURCE_IO
+ },
+ {
+ .start = 8,
+ .end = 8,
+ .flags = IORESOURCE_IRQ
+ }
+};
+
+static struct platform_device pcit_cmos_device = {
+ .name = "rtc_cmos",
+ .num_resources = ARRAY_SIZE(pcit_cmos_rsrc),
+ .resource = pcit_cmos_rsrc
+};
+
+static struct platform_device pcit_pcspeaker_pdev = {
+ .name = "pcspkr",
+ .id = -1,
+};
+
+static struct resource sni_io_resource = {
+ .start = 0x00000000UL,
+ .end = 0x03bfffffUL,
+ .name = "PCIT IO",
+ .flags = IORESOURCE_IO,
+};
+
+static struct resource pcit_io_resources[] = {
+ {
+ .start = 0x00,
+ .end = 0x1f,
+ .name = "dma1",
+ .flags = IORESOURCE_BUSY
+ }, {
+ .start = 0x40,
+ .end = 0x5f,
+ .name = "timer",
+ .flags = IORESOURCE_BUSY
+ }, {
+ .start = 0x60,
+ .end = 0x6f,
+ .name = "keyboard",
+ .flags = IORESOURCE_BUSY
+ }, {
+ .start = 0x80,
+ .end = 0x8f,
+ .name = "dma page reg",
+ .flags = IORESOURCE_BUSY
+ }, {
+ .start = 0xc0,
+ .end = 0xdf,
+ .name = "dma2",
+ .flags = IORESOURCE_BUSY
+ }, {
+ .start = 0xcf8,
+ .end = 0xcfb,
+ .name = "PCI config addr",
+ .flags = IORESOURCE_BUSY
+ }, {
+ .start = 0xcfc,
+ .end = 0xcff,
+ .name = "PCI config data",
+ .flags = IORESOURCE_BUSY
+ }
+};
+
+static void __init sni_pcit_resource_init(void)
+{
+ int i;
+
+ /* request I/O space for devices used on all i[345]86 PCs */
+ for (i = 0; i < ARRAY_SIZE(pcit_io_resources); i++)
+ request_resource(&sni_io_resource, pcit_io_resources + i);
+}
+
+
+extern struct pci_ops sni_pcit_ops;
+
+#ifdef CONFIG_PCI
+static struct resource sni_mem_resource = {
+ .start = 0x18000000UL,
+ .end = 0x1fbfffffUL,
+ .name = "PCIT PCI MEM",
+ .flags = IORESOURCE_MEM
+};
+
+static struct pci_controller sni_pcit_controller = {
+ .pci_ops = &sni_pcit_ops,
+ .mem_resource = &sni_mem_resource,
+ .mem_offset = 0x00000000UL,
+ .io_resource = &sni_io_resource,
+ .io_offset = 0x00000000UL,
+ .io_map_base = SNI_PORT_BASE
+};
+#endif /* CONFIG_PCI */
+
+static void enable_pcit_irq(struct irq_data *d)
+{
+ u32 mask = 1 << (d->irq - SNI_PCIT_INT_START + 24);
+
+ *(volatile u32 *)SNI_PCIT_INT_REG |= mask;
+}
+
+void disable_pcit_irq(struct irq_data *d)
+{
+ u32 mask = 1 << (d->irq - SNI_PCIT_INT_START + 24);
+
+ *(volatile u32 *)SNI_PCIT_INT_REG &= ~mask;
+}
+
+static struct irq_chip pcit_irq_type = {
+ .name = "PCIT",
+ .irq_mask = disable_pcit_irq,
+ .irq_unmask = enable_pcit_irq,
+};
+
+static void pcit_hwint1(void)
+{
+ u32 pending = *(volatile u32 *)SNI_PCIT_INT_REG;
+ int irq;
+
+ clear_c0_status(IE_IRQ1);
+ irq = ffs((pending >> 16) & 0x7f);
+
+ if (likely(irq > 0))
+ do_IRQ(irq + SNI_PCIT_INT_START - 1);
+ set_c0_status(IE_IRQ1);
+}
+
+static void pcit_hwint0(void)
+{
+ u32 pending = *(volatile u32 *)SNI_PCIT_INT_REG;
+ int irq;
+
+ clear_c0_status(IE_IRQ0);
+ irq = ffs((pending >> 16) & 0x3f);
+
+ if (likely(irq > 0))
+ do_IRQ(irq + SNI_PCIT_INT_START - 1);
+ set_c0_status(IE_IRQ0);
+}
+
+static void sni_pcit_hwint(void)
+{
+ u32 pending = read_c0_cause() & read_c0_status();
+
+ if (pending & C_IRQ1)
+ pcit_hwint1();
+ else if (pending & C_IRQ2)
+ do_IRQ(MIPS_CPU_IRQ_BASE + 4);
+ else if (pending & C_IRQ3)
+ do_IRQ(MIPS_CPU_IRQ_BASE + 5);
+ else if (pending & C_IRQ5)
+ do_IRQ(MIPS_CPU_IRQ_BASE + 7);
+}
+
+static void sni_pcit_hwint_cplus(void)
+{
+ u32 pending = read_c0_cause() & read_c0_status();
+
+ if (pending & C_IRQ0)
+ pcit_hwint0();
+ else if (pending & C_IRQ1)
+ do_IRQ(MIPS_CPU_IRQ_BASE + 3);
+ else if (pending & C_IRQ2)
+ do_IRQ(MIPS_CPU_IRQ_BASE + 4);
+ else if (pending & C_IRQ3)
+ do_IRQ(MIPS_CPU_IRQ_BASE + 5);
+ else if (pending & C_IRQ5)
+ do_IRQ(MIPS_CPU_IRQ_BASE + 7);
+}
+
+void __init sni_pcit_irq_init(void)
+{
+ int i;
+
+ mips_cpu_irq_init();
+ for (i = SNI_PCIT_INT_START; i <= SNI_PCIT_INT_END; i++)
+ irq_set_chip_and_handler(i, &pcit_irq_type, handle_level_irq);
+ *(volatile u32 *)SNI_PCIT_INT_REG = 0;
+ sni_hwint = sni_pcit_hwint;
+ change_c0_status(ST0_IM, IE_IRQ1);
+ setup_irq(SNI_PCIT_INT_START + 6, &sni_isa_irq);
+}
+
+void __init sni_pcit_cplus_irq_init(void)
+{
+ int i;
+
+ mips_cpu_irq_init();
+ for (i = SNI_PCIT_INT_START; i <= SNI_PCIT_INT_END; i++)
+ irq_set_chip_and_handler(i, &pcit_irq_type, handle_level_irq);
+ *(volatile u32 *)SNI_PCIT_INT_REG = 0x40000000;
+ sni_hwint = sni_pcit_hwint_cplus;
+ change_c0_status(ST0_IM, IE_IRQ0);
+ setup_irq(MIPS_CPU_IRQ_BASE + 3, &sni_isa_irq);
+}
+
+void __init sni_pcit_init(void)
+{
+ ioport_resource.end = sni_io_resource.end;
+#ifdef CONFIG_PCI
+ PCIBIOS_MIN_IO = 0x9000;
+ register_pci_controller(&sni_pcit_controller);
+#endif
+ sni_pcit_resource_init();
+}
+
+static int __init snirm_pcit_setup_devinit(void)
+{
+ switch (sni_brd_type) {
+ case SNI_BRD_PCI_TOWER:
+ platform_device_register(&pcit_serial8250_device);
+ platform_device_register(&pcit_cmos_device);
+ platform_device_register(&pcit_pcspeaker_pdev);
+ break;
+
+ case SNI_BRD_PCI_TOWER_CPLUS:
+ platform_device_register(&pcit_cplus_serial8250_device);
+ platform_device_register(&pcit_cmos_device);
+ platform_device_register(&pcit_pcspeaker_pdev);
+ break;
+ }
+ return 0;
+}
+
+device_initcall(snirm_pcit_setup_devinit);
diff --git a/arch/mips/sni/reset.c b/arch/mips/sni/reset.c
new file mode 100644
index 000000000..244f94276
--- /dev/null
+++ b/arch/mips/sni/reset.c
@@ -0,0 +1,45 @@
+/*
+ * linux/arch/mips/sni/process.c
+ *
+ * Reset a SNI machine.
+ */
+#include <asm/io.h>
+#include <asm/reboot.h>
+#include <asm/sni.h>
+
+/*
+ * This routine reboots the machine by asking the keyboard
+ * controller to pulse the reset-line low. We try that for a while,
+ * and if it doesn't work, we do some other stupid things.
+ */
+static inline void kb_wait(void)
+{
+ int i;
+
+ for (i = 0; i < 0x10000; i++)
+ if ((inb_p(0x64) & 0x02) == 0)
+ break;
+}
+
+/* XXX This ends up at the ARC firmware prompt ... */
+void sni_machine_restart(char *command)
+{
+ int i, j;
+
+ /* This does a normal via the keyboard controller like a PC.
+ We can do that easier ... */
+ local_irq_disable();
+ for (;;) {
+ for (i = 0; i < 100; i++) {
+ kb_wait();
+ for (j = 0; j < 100000 ; j++)
+ /* nothing */;
+ outb_p(0xfe, 0x64); /* pulse reset low */
+ }
+ }
+}
+
+void sni_machine_power_off(void)
+{
+ *(volatile unsigned char *)PCIMT_CSWCSM = 0xfd;
+}
diff --git a/arch/mips/sni/rm200.c b/arch/mips/sni/rm200.c
new file mode 100644
index 000000000..a046b3026
--- /dev/null
+++ b/arch/mips/sni/rm200.c
@@ -0,0 +1,490 @@
+/*
+ * RM200 specific code
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2006,2007 Thomas Bogendoerfer (tsbogend@alpha.franken.de)
+ *
+ * i8259 parts ripped out of arch/mips/kernel/i8259.c
+ */
+
+#include <linux/delay.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/platform_device.h>
+#include <linux/serial_8250.h>
+#include <linux/io.h>
+
+#include <asm/sni.h>
+#include <asm/time.h>
+#include <asm/irq_cpu.h>
+
+#define RM200_I8259A_IRQ_BASE 32
+
+#define MEMPORT(_base,_irq) \
+ { \
+ .mapbase = _base, \
+ .irq = _irq, \
+ .uartclk = 1843200, \
+ .iotype = UPIO_MEM, \
+ .flags = UPF_BOOT_AUTOCONF|UPF_IOREMAP, \
+ }
+
+static struct plat_serial8250_port rm200_data[] = {
+ MEMPORT(0x160003f8, RM200_I8259A_IRQ_BASE + 4),
+ MEMPORT(0x160002f8, RM200_I8259A_IRQ_BASE + 3),
+ { },
+};
+
+static struct platform_device rm200_serial8250_device = {
+ .name = "serial8250",
+ .id = PLAT8250_DEV_PLATFORM,
+ .dev = {
+ .platform_data = rm200_data,
+ },
+};
+
+static struct resource rm200_ds1216_rsrc[] = {
+ {
+ .start = 0x1cd41ffc,
+ .end = 0x1cd41fff,
+ .flags = IORESOURCE_MEM
+ }
+};
+
+static struct platform_device rm200_ds1216_device = {
+ .name = "rtc-ds1216",
+ .num_resources = ARRAY_SIZE(rm200_ds1216_rsrc),
+ .resource = rm200_ds1216_rsrc
+};
+
+static struct resource snirm_82596_rm200_rsrc[] = {
+ {
+ .start = 0x18000000,
+ .end = 0x180fffff,
+ .flags = IORESOURCE_MEM
+ },
+ {
+ .start = 0x1b000000,
+ .end = 0x1b000004,
+ .flags = IORESOURCE_MEM
+ },
+ {
+ .start = 0x1ff00000,
+ .end = 0x1ff00020,
+ .flags = IORESOURCE_MEM
+ },
+ {
+ .start = 27,
+ .end = 27,
+ .flags = IORESOURCE_IRQ
+ },
+ {
+ .flags = 0x00
+ }
+};
+
+static struct platform_device snirm_82596_rm200_pdev = {
+ .name = "snirm_82596",
+ .num_resources = ARRAY_SIZE(snirm_82596_rm200_rsrc),
+ .resource = snirm_82596_rm200_rsrc
+};
+
+static struct resource snirm_53c710_rm200_rsrc[] = {
+ {
+ .start = 0x19000000,
+ .end = 0x190fffff,
+ .flags = IORESOURCE_MEM
+ },
+ {
+ .start = 26,
+ .end = 26,
+ .flags = IORESOURCE_IRQ
+ }
+};
+
+static struct platform_device snirm_53c710_rm200_pdev = {
+ .name = "snirm_53c710",
+ .num_resources = ARRAY_SIZE(snirm_53c710_rm200_rsrc),
+ .resource = snirm_53c710_rm200_rsrc
+};
+
+static int __init snirm_setup_devinit(void)
+{
+ if (sni_brd_type == SNI_BRD_RM200) {
+ platform_device_register(&rm200_serial8250_device);
+ platform_device_register(&rm200_ds1216_device);
+ platform_device_register(&snirm_82596_rm200_pdev);
+ platform_device_register(&snirm_53c710_rm200_pdev);
+ sni_eisa_root_init();
+ }
+ return 0;
+}
+
+device_initcall(snirm_setup_devinit);
+
+/*
+ * RM200 has an ISA and an EISA bus. The iSA bus is only used
+ * for onboard devices and also has twi i8259 PICs. Since these
+ * PICs are no accessible via inb/outb the following code uses
+ * readb/writeb to access them
+ */
+
+static DEFINE_RAW_SPINLOCK(sni_rm200_i8259A_lock);
+#define PIC_CMD 0x00
+#define PIC_IMR 0x01
+#define PIC_ISR PIC_CMD
+#define PIC_POLL PIC_ISR
+#define PIC_OCW3 PIC_ISR
+
+/* i8259A PIC related value */
+#define PIC_CASCADE_IR 2
+#define MASTER_ICW4_DEFAULT 0x01
+#define SLAVE_ICW4_DEFAULT 0x01
+
+/*
+ * This contains the irq mask for both 8259A irq controllers,
+ */
+static unsigned int rm200_cached_irq_mask = 0xffff;
+static __iomem u8 *rm200_pic_master;
+static __iomem u8 *rm200_pic_slave;
+
+#define cached_master_mask (rm200_cached_irq_mask)
+#define cached_slave_mask (rm200_cached_irq_mask >> 8)
+
+static void sni_rm200_disable_8259A_irq(struct irq_data *d)
+{
+ unsigned int mask, irq = d->irq - RM200_I8259A_IRQ_BASE;
+ unsigned long flags;
+
+ mask = 1 << irq;
+ raw_spin_lock_irqsave(&sni_rm200_i8259A_lock, flags);
+ rm200_cached_irq_mask |= mask;
+ if (irq & 8)
+ writeb(cached_slave_mask, rm200_pic_slave + PIC_IMR);
+ else
+ writeb(cached_master_mask, rm200_pic_master + PIC_IMR);
+ raw_spin_unlock_irqrestore(&sni_rm200_i8259A_lock, flags);
+}
+
+static void sni_rm200_enable_8259A_irq(struct irq_data *d)
+{
+ unsigned int mask, irq = d->irq - RM200_I8259A_IRQ_BASE;
+ unsigned long flags;
+
+ mask = ~(1 << irq);
+ raw_spin_lock_irqsave(&sni_rm200_i8259A_lock, flags);
+ rm200_cached_irq_mask &= mask;
+ if (irq & 8)
+ writeb(cached_slave_mask, rm200_pic_slave + PIC_IMR);
+ else
+ writeb(cached_master_mask, rm200_pic_master + PIC_IMR);
+ raw_spin_unlock_irqrestore(&sni_rm200_i8259A_lock, flags);
+}
+
+static inline int sni_rm200_i8259A_irq_real(unsigned int irq)
+{
+ int value;
+ int irqmask = 1 << irq;
+
+ if (irq < 8) {
+ writeb(0x0B, rm200_pic_master + PIC_CMD);
+ value = readb(rm200_pic_master + PIC_CMD) & irqmask;
+ writeb(0x0A, rm200_pic_master + PIC_CMD);
+ return value;
+ }
+ writeb(0x0B, rm200_pic_slave + PIC_CMD); /* ISR register */
+ value = readb(rm200_pic_slave + PIC_CMD) & (irqmask >> 8);
+ writeb(0x0A, rm200_pic_slave + PIC_CMD);
+ return value;
+}
+
+/*
+ * Careful! The 8259A is a fragile beast, it pretty
+ * much _has_ to be done exactly like this (mask it
+ * first, _then_ send the EOI, and the order of EOI
+ * to the two 8259s is important!
+ */
+void sni_rm200_mask_and_ack_8259A(struct irq_data *d)
+{
+ unsigned int irqmask, irq = d->irq - RM200_I8259A_IRQ_BASE;
+ unsigned long flags;
+
+ irqmask = 1 << irq;
+ raw_spin_lock_irqsave(&sni_rm200_i8259A_lock, flags);
+ /*
+ * Lightweight spurious IRQ detection. We do not want
+ * to overdo spurious IRQ handling - it's usually a sign
+ * of hardware problems, so we only do the checks we can
+ * do without slowing down good hardware unnecessarily.
+ *
+ * Note that IRQ7 and IRQ15 (the two spurious IRQs
+ * usually resulting from the 8259A-1|2 PICs) occur
+ * even if the IRQ is masked in the 8259A. Thus we
+ * can check spurious 8259A IRQs without doing the
+ * quite slow i8259A_irq_real() call for every IRQ.
+ * This does not cover 100% of spurious interrupts,
+ * but should be enough to warn the user that there
+ * is something bad going on ...
+ */
+ if (rm200_cached_irq_mask & irqmask)
+ goto spurious_8259A_irq;
+ rm200_cached_irq_mask |= irqmask;
+
+handle_real_irq:
+ if (irq & 8) {
+ readb(rm200_pic_slave + PIC_IMR);
+ writeb(cached_slave_mask, rm200_pic_slave + PIC_IMR);
+ writeb(0x60+(irq & 7), rm200_pic_slave + PIC_CMD);
+ writeb(0x60+PIC_CASCADE_IR, rm200_pic_master + PIC_CMD);
+ } else {
+ readb(rm200_pic_master + PIC_IMR);
+ writeb(cached_master_mask, rm200_pic_master + PIC_IMR);
+ writeb(0x60+irq, rm200_pic_master + PIC_CMD);
+ }
+ raw_spin_unlock_irqrestore(&sni_rm200_i8259A_lock, flags);
+ return;
+
+spurious_8259A_irq:
+ /*
+ * this is the slow path - should happen rarely.
+ */
+ if (sni_rm200_i8259A_irq_real(irq))
+ /*
+ * oops, the IRQ _is_ in service according to the
+ * 8259A - not spurious, go handle it.
+ */
+ goto handle_real_irq;
+
+ {
+ static int spurious_irq_mask;
+ /*
+ * At this point we can be sure the IRQ is spurious,
+ * lets ACK and report it. [once per IRQ]
+ */
+ if (!(spurious_irq_mask & irqmask)) {
+ printk(KERN_DEBUG
+ "spurious RM200 8259A interrupt: IRQ%d.\n", irq);
+ spurious_irq_mask |= irqmask;
+ }
+ atomic_inc(&irq_err_count);
+ /*
+ * Theoretically we do not have to handle this IRQ,
+ * but in Linux this does not cause problems and is
+ * simpler for us.
+ */
+ goto handle_real_irq;
+ }
+}
+
+static struct irq_chip sni_rm200_i8259A_chip = {
+ .name = "RM200-XT-PIC",
+ .irq_mask = sni_rm200_disable_8259A_irq,
+ .irq_unmask = sni_rm200_enable_8259A_irq,
+ .irq_mask_ack = sni_rm200_mask_and_ack_8259A,
+};
+
+/*
+ * Do the traditional i8259 interrupt polling thing. This is for the few
+ * cases where no better interrupt acknowledge method is available and we
+ * absolutely must touch the i8259.
+ */
+static inline int sni_rm200_i8259_irq(void)
+{
+ int irq;
+
+ raw_spin_lock(&sni_rm200_i8259A_lock);
+
+ /* Perform an interrupt acknowledge cycle on controller 1. */
+ writeb(0x0C, rm200_pic_master + PIC_CMD); /* prepare for poll */
+ irq = readb(rm200_pic_master + PIC_CMD) & 7;
+ if (irq == PIC_CASCADE_IR) {
+ /*
+ * Interrupt is cascaded so perform interrupt
+ * acknowledge on controller 2.
+ */
+ writeb(0x0C, rm200_pic_slave + PIC_CMD); /* prepare for poll */
+ irq = (readb(rm200_pic_slave + PIC_CMD) & 7) + 8;
+ }
+
+ if (unlikely(irq == 7)) {
+ /*
+ * This may be a spurious interrupt.
+ *
+ * Read the interrupt status register (ISR). If the most
+ * significant bit is not set then there is no valid
+ * interrupt.
+ */
+ writeb(0x0B, rm200_pic_master + PIC_ISR); /* ISR register */
+ if (~readb(rm200_pic_master + PIC_ISR) & 0x80)
+ irq = -1;
+ }
+
+ raw_spin_unlock(&sni_rm200_i8259A_lock);
+
+ return likely(irq >= 0) ? irq + RM200_I8259A_IRQ_BASE : irq;
+}
+
+void sni_rm200_init_8259A(void)
+{
+ unsigned long flags;
+
+ raw_spin_lock_irqsave(&sni_rm200_i8259A_lock, flags);
+
+ writeb(0xff, rm200_pic_master + PIC_IMR);
+ writeb(0xff, rm200_pic_slave + PIC_IMR);
+
+ writeb(0x11, rm200_pic_master + PIC_CMD);
+ writeb(0, rm200_pic_master + PIC_IMR);
+ writeb(1U << PIC_CASCADE_IR, rm200_pic_master + PIC_IMR);
+ writeb(MASTER_ICW4_DEFAULT, rm200_pic_master + PIC_IMR);
+ writeb(0x11, rm200_pic_slave + PIC_CMD);
+ writeb(8, rm200_pic_slave + PIC_IMR);
+ writeb(PIC_CASCADE_IR, rm200_pic_slave + PIC_IMR);
+ writeb(SLAVE_ICW4_DEFAULT, rm200_pic_slave + PIC_IMR);
+ udelay(100); /* wait for 8259A to initialize */
+
+ writeb(cached_master_mask, rm200_pic_master + PIC_IMR);
+ writeb(cached_slave_mask, rm200_pic_slave + PIC_IMR);
+
+ raw_spin_unlock_irqrestore(&sni_rm200_i8259A_lock, flags);
+}
+
+/*
+ * IRQ2 is cascade interrupt to second interrupt controller
+ */
+static struct irqaction sni_rm200_irq2 = {
+ .handler = no_action,
+ .name = "cascade",
+ .flags = IRQF_NO_THREAD,
+};
+
+static struct resource sni_rm200_pic1_resource = {
+ .name = "onboard ISA pic1",
+ .start = 0x16000020,
+ .end = 0x16000023,
+ .flags = IORESOURCE_BUSY
+};
+
+static struct resource sni_rm200_pic2_resource = {
+ .name = "onboard ISA pic2",
+ .start = 0x160000a0,
+ .end = 0x160000a3,
+ .flags = IORESOURCE_BUSY
+};
+
+/* ISA irq handler */
+static irqreturn_t sni_rm200_i8259A_irq_handler(int dummy, void *p)
+{
+ int irq;
+
+ irq = sni_rm200_i8259_irq();
+ if (unlikely(irq < 0))
+ return IRQ_NONE;
+
+ do_IRQ(irq);
+ return IRQ_HANDLED;
+}
+
+struct irqaction sni_rm200_i8259A_irq = {
+ .handler = sni_rm200_i8259A_irq_handler,
+ .name = "onboard ISA",
+ .flags = IRQF_SHARED
+};
+
+void __init sni_rm200_i8259_irqs(void)
+{
+ int i;
+
+ rm200_pic_master = ioremap_nocache(0x16000020, 4);
+ if (!rm200_pic_master)
+ return;
+ rm200_pic_slave = ioremap_nocache(0x160000a0, 4);
+ if (!rm200_pic_slave) {
+ iounmap(rm200_pic_master);
+ return;
+ }
+
+ insert_resource(&iomem_resource, &sni_rm200_pic1_resource);
+ insert_resource(&iomem_resource, &sni_rm200_pic2_resource);
+
+ sni_rm200_init_8259A();
+
+ for (i = RM200_I8259A_IRQ_BASE; i < RM200_I8259A_IRQ_BASE + 16; i++)
+ irq_set_chip_and_handler(i, &sni_rm200_i8259A_chip,
+ handle_level_irq);
+
+ setup_irq(RM200_I8259A_IRQ_BASE + PIC_CASCADE_IR, &sni_rm200_irq2);
+}
+
+
+#define SNI_RM200_INT_STAT_REG CKSEG1ADDR(0xbc000000)
+#define SNI_RM200_INT_ENA_REG CKSEG1ADDR(0xbc080000)
+
+#define SNI_RM200_INT_START 24
+#define SNI_RM200_INT_END 28
+
+static void enable_rm200_irq(struct irq_data *d)
+{
+ unsigned int mask = 1 << (d->irq - SNI_RM200_INT_START);
+
+ *(volatile u8 *)SNI_RM200_INT_ENA_REG &= ~mask;
+}
+
+void disable_rm200_irq(struct irq_data *d)
+{
+ unsigned int mask = 1 << (d->irq - SNI_RM200_INT_START);
+
+ *(volatile u8 *)SNI_RM200_INT_ENA_REG |= mask;
+}
+
+static struct irq_chip rm200_irq_type = {
+ .name = "RM200",
+ .irq_mask = disable_rm200_irq,
+ .irq_unmask = enable_rm200_irq,
+};
+
+static void sni_rm200_hwint(void)
+{
+ u32 pending = read_c0_cause() & read_c0_status();
+ u8 mask;
+ u8 stat;
+ int irq;
+
+ if (pending & C_IRQ5)
+ do_IRQ(MIPS_CPU_IRQ_BASE + 7);
+ else if (pending & C_IRQ0) {
+ clear_c0_status(IE_IRQ0);
+ mask = *(volatile u8 *)SNI_RM200_INT_ENA_REG ^ 0x1f;
+ stat = *(volatile u8 *)SNI_RM200_INT_STAT_REG ^ 0x14;
+ irq = ffs(stat & mask & 0x1f);
+
+ if (likely(irq > 0))
+ do_IRQ(irq + SNI_RM200_INT_START - 1);
+ set_c0_status(IE_IRQ0);
+ }
+}
+
+void __init sni_rm200_irq_init(void)
+{
+ int i;
+
+ * (volatile u8 *)SNI_RM200_INT_ENA_REG = 0x1f;
+
+ sni_rm200_i8259_irqs();
+ mips_cpu_irq_init();
+ /* Actually we've got more interrupts to handle ... */
+ for (i = SNI_RM200_INT_START; i <= SNI_RM200_INT_END; i++)
+ irq_set_chip_and_handler(i, &rm200_irq_type, handle_level_irq);
+ sni_hwint = sni_rm200_hwint;
+ change_c0_status(ST0_IM, IE_IRQ0);
+ setup_irq(SNI_RM200_INT_START + 0, &sni_rm200_i8259A_irq);
+ setup_irq(SNI_RM200_INT_START + 1, &sni_isa_irq);
+}
+
+void __init sni_rm200_init(void)
+{
+}
diff --git a/arch/mips/sni/setup.c b/arch/mips/sni/setup.c
new file mode 100644
index 000000000..efad85c8c
--- /dev/null
+++ b/arch/mips/sni/setup.c
@@ -0,0 +1,263 @@
+/*
+ * Setup pointers to hardware-dependent routines.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1996, 97, 98, 2000, 03, 04, 06 Ralf Baechle (ralf@linux-mips.org)
+ * Copyright (C) 2006,2007 Thomas Bogendoerfer (tsbogend@alpha.franken.de)
+ */
+#include <linux/eisa.h>
+#include <linux/init.h>
+#include <linux/export.h>
+#include <linux/console.h>
+#include <linux/fb.h>
+#include <linux/screen_info.h>
+
+#ifdef CONFIG_FW_ARC
+#include <asm/fw/arc/types.h>
+#include <asm/sgialib.h>
+#endif
+
+#ifdef CONFIG_FW_SNIPROM
+#include <asm/mipsprom.h>
+#endif
+
+#include <asm/bootinfo.h>
+#include <asm/cpu.h>
+#include <asm/io.h>
+#include <asm/reboot.h>
+#include <asm/sni.h>
+
+unsigned int sni_brd_type;
+EXPORT_SYMBOL(sni_brd_type);
+
+extern void sni_machine_restart(char *command);
+extern void sni_machine_power_off(void);
+
+static void __init sni_display_setup(void)
+{
+#if defined(CONFIG_VT) && defined(CONFIG_VGA_CONSOLE) && defined(CONFIG_FW_ARC)
+ struct screen_info *si = &screen_info;
+ DISPLAY_STATUS *di;
+
+ di = ArcGetDisplayStatus(1);
+
+ if (di) {
+ si->orig_x = di->CursorXPosition;
+ si->orig_y = di->CursorYPosition;
+ si->orig_video_cols = di->CursorMaxXPosition;
+ si->orig_video_lines = di->CursorMaxYPosition;
+ si->orig_video_isVGA = VIDEO_TYPE_VGAC;
+ si->orig_video_points = 16;
+ }
+#endif
+}
+
+static void __init sni_console_setup(void)
+{
+#ifndef CONFIG_FW_ARC
+ char *ctype;
+ char *cdev;
+ char *baud;
+ int port;
+ static char options[8] __initdata;
+
+ cdev = prom_getenv("console_dev");
+ if (strncmp(cdev, "tty", 3) == 0) {
+ ctype = prom_getenv("console");
+ switch (*ctype) {
+ default:
+ case 'l':
+ port = 0;
+ baud = prom_getenv("lbaud");
+ break;
+ case 'r':
+ port = 1;
+ baud = prom_getenv("rbaud");
+ break;
+ }
+ if (baud)
+ strcpy(options, baud);
+ if (strncmp(cdev, "tty552", 6) == 0)
+ add_preferred_console("ttyS", port,
+ baud ? options : NULL);
+ else
+ add_preferred_console("ttySC", port,
+ baud ? options : NULL);
+ }
+#endif
+}
+
+#ifdef DEBUG
+static void __init sni_idprom_dump(void)
+{
+ int i;
+
+ pr_debug("SNI IDProm dump:\n");
+ for (i = 0; i < 256; i++) {
+ if (i%16 == 0)
+ pr_debug("%04x ", i);
+
+ printk("%02x ", *(unsigned char *) (SNI_IDPROM_BASE + i));
+
+ if (i % 16 == 15)
+ printk("\n");
+ }
+}
+#endif
+
+void __init plat_mem_setup(void)
+{
+ int cputype;
+
+ set_io_port_base(SNI_PORT_BASE);
+// ioport_resource.end = sni_io_resource.end;
+
+ /*
+ * Setup (E)ISA I/O memory access stuff
+ */
+#ifdef CONFIG_EISA
+ EISA_bus = 1;
+#endif
+
+ sni_brd_type = *(unsigned char *)SNI_IDPROM_BRDTYPE;
+ cputype = *(unsigned char *)SNI_IDPROM_CPUTYPE;
+ switch (sni_brd_type) {
+ case SNI_BRD_TOWER_OASIC:
+ switch (cputype) {
+ case SNI_CPU_M8030:
+ system_type = "RM400-330";
+ break;
+ case SNI_CPU_M8031:
+ system_type = "RM400-430";
+ break;
+ case SNI_CPU_M8037:
+ system_type = "RM400-530";
+ break;
+ case SNI_CPU_M8034:
+ system_type = "RM400-730";
+ break;
+ default:
+ system_type = "RM400-xxx";
+ break;
+ }
+ break;
+ case SNI_BRD_MINITOWER:
+ switch (cputype) {
+ case SNI_CPU_M8021:
+ case SNI_CPU_M8043:
+ system_type = "RM400-120";
+ break;
+ case SNI_CPU_M8040:
+ system_type = "RM400-220";
+ break;
+ case SNI_CPU_M8053:
+ system_type = "RM400-225";
+ break;
+ case SNI_CPU_M8050:
+ system_type = "RM400-420";
+ break;
+ default:
+ system_type = "RM400-xxx";
+ break;
+ }
+ break;
+ case SNI_BRD_PCI_TOWER:
+ system_type = "RM400-Cxx";
+ break;
+ case SNI_BRD_RM200:
+ system_type = "RM200-xxx";
+ break;
+ case SNI_BRD_PCI_MTOWER:
+ system_type = "RM300-Cxx";
+ break;
+ case SNI_BRD_PCI_DESKTOP:
+ switch (read_c0_prid() & PRID_IMP_MASK) {
+ case PRID_IMP_R4600:
+ case PRID_IMP_R4700:
+ system_type = "RM200-C20";
+ break;
+ case PRID_IMP_R5000:
+ system_type = "RM200-C40";
+ break;
+ default:
+ system_type = "RM200-Cxx";
+ break;
+ }
+ break;
+ case SNI_BRD_PCI_TOWER_CPLUS:
+ system_type = "RM400-Exx";
+ break;
+ case SNI_BRD_PCI_MTOWER_CPLUS:
+ system_type = "RM300-Exx";
+ break;
+ }
+ pr_debug("Found SNI brdtype %02x name %s\n", sni_brd_type, system_type);
+
+#ifdef DEBUG
+ sni_idprom_dump();
+#endif
+
+ switch (sni_brd_type) {
+ case SNI_BRD_10:
+ case SNI_BRD_10NEW:
+ case SNI_BRD_TOWER_OASIC:
+ case SNI_BRD_MINITOWER:
+ sni_a20r_init();
+ break;
+
+ case SNI_BRD_PCI_TOWER:
+ case SNI_BRD_PCI_TOWER_CPLUS:
+ sni_pcit_init();
+ break;
+
+ case SNI_BRD_RM200:
+ sni_rm200_init();
+ break;
+
+ case SNI_BRD_PCI_MTOWER:
+ case SNI_BRD_PCI_DESKTOP:
+ case SNI_BRD_PCI_MTOWER_CPLUS:
+ sni_pcimt_init();
+ break;
+ }
+
+ _machine_restart = sni_machine_restart;
+ pm_power_off = sni_machine_power_off;
+
+ sni_display_setup();
+ sni_console_setup();
+}
+
+#ifdef CONFIG_PCI
+
+#include <linux/pci.h>
+#include <video/vga.h>
+#include <video/cirrus.h>
+
+static void quirk_cirrus_ram_size(struct pci_dev *dev)
+{
+ u16 cmd;
+
+ /*
+ * firmware doesn't set the ram size correct, so we
+ * need to do it here, otherwise we get screen corruption
+ * on older Cirrus chips
+ */
+ pci_read_config_word(dev, PCI_COMMAND, &cmd);
+ if ((cmd & (PCI_COMMAND_IO|PCI_COMMAND_MEMORY))
+ == (PCI_COMMAND_IO|PCI_COMMAND_MEMORY)) {
+ vga_wseq(NULL, CL_SEQR6, 0x12); /* unlock all extension registers */
+ vga_wseq(NULL, CL_SEQRF, 0x18);
+ }
+}
+
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_CIRRUS, PCI_DEVICE_ID_CIRRUS_5434_8,
+ quirk_cirrus_ram_size);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_CIRRUS, PCI_DEVICE_ID_CIRRUS_5436,
+ quirk_cirrus_ram_size);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_CIRRUS, PCI_DEVICE_ID_CIRRUS_5446,
+ quirk_cirrus_ram_size);
+#endif
diff --git a/arch/mips/sni/time.c b/arch/mips/sni/time.c
new file mode 100644
index 000000000..cf8ec568b
--- /dev/null
+++ b/arch/mips/sni/time.c
@@ -0,0 +1,190 @@
+#include <linux/types.h>
+#include <linux/i8253.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/smp.h>
+#include <linux/time.h>
+#include <linux/clockchips.h>
+
+#include <asm/sni.h>
+#include <asm/time.h>
+#include <asm-generic/rtc.h>
+
+#define SNI_CLOCK_TICK_RATE 3686400
+#define SNI_COUNTER2_DIV 64
+#define SNI_COUNTER0_DIV ((SNI_CLOCK_TICK_RATE / SNI_COUNTER2_DIV) / HZ)
+
+static void a20r_set_mode(enum clock_event_mode mode,
+ struct clock_event_device *evt)
+{
+ switch (mode) {
+ case CLOCK_EVT_MODE_PERIODIC:
+ *(volatile u8 *)(A20R_PT_CLOCK_BASE + 12) = 0x34;
+ wmb();
+ *(volatile u8 *)(A20R_PT_CLOCK_BASE + 0) = SNI_COUNTER0_DIV;
+ wmb();
+ *(volatile u8 *)(A20R_PT_CLOCK_BASE + 0) = SNI_COUNTER0_DIV >> 8;
+ wmb();
+
+ *(volatile u8 *)(A20R_PT_CLOCK_BASE + 12) = 0xb4;
+ wmb();
+ *(volatile u8 *)(A20R_PT_CLOCK_BASE + 8) = SNI_COUNTER2_DIV;
+ wmb();
+ *(volatile u8 *)(A20R_PT_CLOCK_BASE + 8) = SNI_COUNTER2_DIV >> 8;
+ wmb();
+
+ break;
+ case CLOCK_EVT_MODE_ONESHOT:
+ case CLOCK_EVT_MODE_UNUSED:
+ case CLOCK_EVT_MODE_SHUTDOWN:
+ break;
+ case CLOCK_EVT_MODE_RESUME:
+ break;
+ }
+}
+
+static struct clock_event_device a20r_clockevent_device = {
+ .name = "a20r-timer",
+ .features = CLOCK_EVT_FEAT_PERIODIC,
+
+ /* .mult, .shift, .max_delta_ns and .min_delta_ns left uninitialized */
+
+ .rating = 300,
+ .irq = SNI_A20R_IRQ_TIMER,
+ .set_mode = a20r_set_mode,
+};
+
+static irqreturn_t a20r_interrupt(int irq, void *dev_id)
+{
+ struct clock_event_device *cd = dev_id;
+
+ *(volatile u8 *)A20R_PT_TIM0_ACK = 0;
+ wmb();
+
+ cd->event_handler(cd);
+
+ return IRQ_HANDLED;
+}
+
+static struct irqaction a20r_irqaction = {
+ .handler = a20r_interrupt,
+ .flags = IRQF_PERCPU | IRQF_TIMER,
+ .name = "a20r-timer",
+};
+
+/*
+ * a20r platform uses 2 counters to divide the input frequency.
+ * Counter 2 output is connected to Counter 0 & 1 input.
+ */
+static void __init sni_a20r_timer_setup(void)
+{
+ struct clock_event_device *cd = &a20r_clockevent_device;
+ struct irqaction *action = &a20r_irqaction;
+ unsigned int cpu = smp_processor_id();
+
+ cd->cpumask = cpumask_of(cpu);
+ clockevents_register_device(cd);
+ action->dev_id = cd;
+ setup_irq(SNI_A20R_IRQ_TIMER, &a20r_irqaction);
+}
+
+#define SNI_8254_TICK_RATE 1193182UL
+
+#define SNI_8254_TCSAMP_COUNTER ((SNI_8254_TICK_RATE / HZ) + 255)
+
+static __init unsigned long dosample(void)
+{
+ u32 ct0, ct1;
+ volatile u8 msb;
+
+ /* Start the counter. */
+ outb_p(0x34, 0x43);
+ outb_p(SNI_8254_TCSAMP_COUNTER & 0xff, 0x40);
+ outb(SNI_8254_TCSAMP_COUNTER >> 8, 0x40);
+
+ /* Get initial counter invariant */
+ ct0 = read_c0_count();
+
+ /* Latch and spin until top byte of counter0 is zero */
+ do {
+ outb(0x00, 0x43);
+ (void) inb(0x40);
+ msb = inb(0x40);
+ ct1 = read_c0_count();
+ } while (msb);
+
+ /* Stop the counter. */
+ outb(0x38, 0x43);
+ /*
+ * Return the difference, this is how far the r4k counter increments
+ * for every 1/HZ seconds. We round off the nearest 1 MHz of master
+ * clock (= 1000000 / HZ / 2).
+ */
+ /*return (ct1 - ct0 + (500000/HZ/2)) / (500000/HZ) * (500000/HZ);*/
+ return (ct1 - ct0) / (500000/HZ) * (500000/HZ);
+}
+
+/*
+ * Here we need to calibrate the cycle counter to at least be close.
+ */
+void __init plat_time_init(void)
+{
+ unsigned long r4k_ticks[3];
+ unsigned long r4k_tick;
+
+ /*
+ * Figure out the r4k offset, the algorithm is very simple and works in
+ * _all_ cases as long as the 8254 counter register itself works ok (as
+ * an interrupt driving timer it does not because of bug, this is why
+ * we are using the onchip r4k counter/compare register to serve this
+ * purpose, but for r4k_offset calculation it will work ok for us).
+ * There are other very complicated ways of performing this calculation
+ * but this one works just fine so I am not going to futz around. ;-)
+ */
+ printk(KERN_INFO "Calibrating system timer... ");
+ dosample(); /* Prime cache. */
+ dosample(); /* Prime cache. */
+ /* Zero is NOT an option. */
+ do {
+ r4k_ticks[0] = dosample();
+ } while (!r4k_ticks[0]);
+ do {
+ r4k_ticks[1] = dosample();
+ } while (!r4k_ticks[1]);
+
+ if (r4k_ticks[0] != r4k_ticks[1]) {
+ printk("warning: timer counts differ, retrying... ");
+ r4k_ticks[2] = dosample();
+ if (r4k_ticks[2] == r4k_ticks[0]
+ || r4k_ticks[2] == r4k_ticks[1])
+ r4k_tick = r4k_ticks[2];
+ else {
+ printk("disagreement, using average... ");
+ r4k_tick = (r4k_ticks[0] + r4k_ticks[1]
+ + r4k_ticks[2]) / 3;
+ }
+ } else
+ r4k_tick = r4k_ticks[0];
+
+ printk("%d [%d.%04d MHz CPU]\n", (int) r4k_tick,
+ (int) (r4k_tick / (500000 / HZ)),
+ (int) (r4k_tick % (500000 / HZ)));
+
+ mips_hpt_frequency = r4k_tick * HZ;
+
+ switch (sni_brd_type) {
+ case SNI_BRD_10:
+ case SNI_BRD_10NEW:
+ case SNI_BRD_TOWER_OASIC:
+ case SNI_BRD_MINITOWER:
+ sni_a20r_timer_setup();
+ break;
+ }
+ setup_pit_timer();
+}
+
+void read_persistent_clock(struct timespec *ts)
+{
+ ts->tv_sec = -1;
+ ts->tv_nsec = 0;
+}
generated by cgit v1.2.3-54-g00ecf (git 2.45.2) at 2024-11-03 23:22:15 +0000