diff options
Diffstat (limited to 'arch/mn10300/Kconfig')
| -rw-r--r-- | arch/mn10300/Kconfig | 495 |
1 files changed, 495 insertions, 0 deletions
diff --git a/arch/mn10300/Kconfig b/arch/mn10300/Kconfig new file mode 100644 index 000000000..4434b54e1 --- /dev/null +++ b/arch/mn10300/Kconfig @@ -0,0 +1,495 @@ +config MN10300 + def_bool y + select HAVE_OPROFILE + select GENERIC_IRQ_SHOW + select ARCH_WANT_IPC_PARSE_VERSION + select HAVE_ARCH_TRACEHOOK + select HAVE_ARCH_KGDB + select GENERIC_ATOMIC64 + select HAVE_NMI_WATCHDOG if MN10300_WD_TIMER + select VIRT_TO_BUS + select GENERIC_CLOCKEVENTS + select MODULES_USE_ELF_RELA + select OLD_SIGSUSPEND3 + select OLD_SIGACTION + select HAVE_DEBUG_STACKOVERFLOW + +config AM33_2 + def_bool n + +config AM33_3 + def_bool n + +config AM34_2 + def_bool n + select MN10300_HAS_ATOMIC_OPS_UNIT + select MN10300_HAS_CACHE_SNOOP + +config ERRATUM_NEED_TO_RELOAD_MMUCTR + def_bool y if AM33_3 || AM34_2 + +config MMU + def_bool y + +config HIGHMEM + def_bool n + +config NUMA + def_bool n + +config UID16 + def_bool y + +config RWSEM_GENERIC_SPINLOCK + def_bool y + +config RWSEM_XCHGADD_ALGORITHM + bool + +config GENERIC_CALIBRATE_DELAY + def_bool y + +config GENERIC_HWEIGHT + def_bool y + +config GENERIC_BUG + def_bool y + +config QUICKLIST + def_bool y + +config ARCH_HAS_ILOG2_U32 + def_bool y + +config HOTPLUG_CPU + def_bool n + +source "init/Kconfig" + +source "kernel/Kconfig.freezer" + + +menu "Panasonic MN10300 system setup" + +choice + prompt "Unit type" + default MN10300_UNIT_ASB2303 + help + This option specifies board for which the kernel will be + compiled. It affects the external peripherals catered for. + +config MN10300_UNIT_ASB2303 + bool "ASB2303" + +config MN10300_UNIT_ASB2305 + bool "ASB2305" + +config MN10300_UNIT_ASB2364 + bool "ASB2364" + select SMSC911X_ARCH_HOOKS if SMSC911X + +endchoice + +choice + prompt "Processor support" + default MN10300_PROC_MN103E010 + help + This option specifies the processor for which the kernel will be + compiled. It affects the on-chip peripherals catered for. + +config MN10300_PROC_MN103E010 + bool "MN103E010" + depends on MN10300_UNIT_ASB2303 || MN10300_UNIT_ASB2305 + select AM33_2 + select MN10300_PROC_HAS_TTYSM0 + select MN10300_PROC_HAS_TTYSM1 + select MN10300_PROC_HAS_TTYSM2 + +config MN10300_PROC_MN2WS0050 + bool "MN2WS0050" + depends on MN10300_UNIT_ASB2364 + select AM34_2 + select MN10300_PROC_HAS_TTYSM0 + select MN10300_PROC_HAS_TTYSM1 + select MN10300_PROC_HAS_TTYSM2 + +endchoice + +config MN10300_HAS_ATOMIC_OPS_UNIT + def_bool n + help + This should be enabled if the processor has an atomic ops unit + capable of doing LL/SC equivalent operations. + +config FPU + bool "FPU present" + default y + depends on MN10300_PROC_MN103E010 || MN10300_PROC_MN2WS0050 + +config LAZY_SAVE_FPU + bool "Save FPU state lazily" + default y + depends on FPU && !SMP + help + Enable this to be lazy in the saving of the FPU state to the owning + task's thread struct. This is useful if most tasks on the system + don't use the FPU as only those tasks that use it will pass it + between them, and the state needn't be saved for a task that isn't + using it. + + This can't be so easily used on SMP as the process that owns the FPU + state on a CPU may be currently running on another CPU, so for the + moment, it is disabled. + +source "arch/mn10300/mm/Kconfig.cache" + +config MN10300_TLB_USE_PIDR + def_bool y + +menu "Memory layout options" + +config KERNEL_RAM_BASE_ADDRESS + hex "Base address of kernel RAM" + default "0x90000000" + +config INTERRUPT_VECTOR_BASE + hex "Base address of vector table" + default "0x90000000" + help + The base address of the vector table will be programmed into + the TBR register. It must be on 16MiB address boundary. + +config KERNEL_TEXT_ADDRESS + hex "Base address of kernel" + default "0x90001000" + +config KERNEL_ZIMAGE_BASE_ADDRESS + hex "Base address of compressed vmlinux image" + default "0x50700000" + +config BOOT_STACK_OFFSET + hex + default "0xF00" if SMP + default "0xFF0" if !SMP + +config BOOT_STACK_SIZE + hex + depends on SMP + default "0x100" +endmenu + +config SMP + bool "Symmetric multi-processing support" + default y + depends on MN10300_PROC_MN2WS0050 + ---help--- + This enables support for systems with more than one CPU. If you have + a system with only one CPU, say N. If you have a system with more + than one CPU, say Y. + + If you say N here, the kernel will run on uni- and multiprocessor + machines, but will use only one CPU of a multiprocessor machine. If + you say Y here, the kernel will run on many, but not all, + uniprocessor machines. On a uniprocessor machine, the kernel + will run faster if you say N here. + + See also <file:Documentation/x86/i386/IO-APIC.txt>, + <file:Documentation/nmi_watchdog.txt> and the SMP-HOWTO available at + <http://www.tldp.org/docs.html#howto>. + + If you don't know what to do here, say N. + +config NR_CPUS + int + depends on SMP + default "2" + +source "kernel/Kconfig.preempt" + +config MN10300_CURRENT_IN_E2 + bool "Hold current task address in E2 register" + depends on !SMP + default y + help + This option removes the E2/R2 register from the set available to gcc + for normal use and instead uses it to store the address of the + current process's task_struct whilst in the kernel. + + This means the kernel doesn't need to calculate the address each time + "current" is used (take SP, AND with mask and dereference pointer + just to get the address), and instead can just use E2+offset + addressing each time. + + This has no effect on userspace. + +config MN10300_USING_JTAG + bool "Using JTAG to debug kernel" + default y + help + This options indicates that JTAG will be used to debug the kernel. It + suppresses the use of certain hardware debugging features, such as + single-stepping, which are taken over completely by the JTAG unit. + +source "kernel/Kconfig.hz" + +config MN10300_RTC + bool "Using MN10300 RTC" + depends on MN10300_PROC_MN103E010 || MN10300_PROC_MN2WS0050 + select GENERIC_CMOS_UPDATE + default n + help + This option enables support for the RTC, thus enabling time to be + tracked, even when system is powered down. This is available on-chip + on the MN103E010. + +config MN10300_WD_TIMER + bool "Using MN10300 watchdog timer" + default y + help + This options indicates that the watchdog timer will be used. + +config PCI + bool "Use PCI" + depends on MN10300_UNIT_ASB2305 + default y + select GENERIC_PCI_IOMAP + help + Some systems (such as the ASB2305) have PCI onboard. If you have one + of these boards and you wish to use the PCI facilities, say Y here. + + The PCI-HOWTO, available from + <http://www.tldp.org/docs.html#howto>, contains valuable + information about which PCI hardware does work under Linux and which + doesn't. + +source "drivers/pci/Kconfig" + +source "drivers/pcmcia/Kconfig" + +menu "MN10300 internal serial options" + +config MN10300_PROC_HAS_TTYSM0 + bool + default n + +config MN10300_PROC_HAS_TTYSM1 + bool + default n + +config MN10300_PROC_HAS_TTYSM2 + bool + default n + +config MN10300_TTYSM + bool "Support for ttySM serial ports" + depends on MN10300 + default y + select SERIAL_CORE + help + This option enables support for the on-chip serial ports that the + MN10300 has available. + +config MN10300_TTYSM_CONSOLE + bool "Support for console on ttySM serial ports" + depends on MN10300_TTYSM + select SERIAL_CORE_CONSOLE + help + This option enables support for a console on the on-chip serial ports + that the MN10300 has available. + +# +# /dev/ttySM0 +# +config MN10300_TTYSM0 + bool "Enable SIF0 (/dev/ttySM0)" + depends on MN10300_TTYSM && MN10300_PROC_HAS_TTYSM0 + help + Enable access to SIF0 through /dev/ttySM0 or gdb-stub + +choice + prompt "Select the timer to supply the clock for SIF0" + default MN10300_TTYSM0_TIMER8 + depends on MN10300_TTYSM0 + +config MN10300_TTYSM0_TIMER8 + bool "Use timer 8 (16-bit)" + +config MN10300_TTYSM0_TIMER2 + bool "Use timer 2 (8-bit)" + +endchoice + +# +# /dev/ttySM1 +# +config MN10300_TTYSM1 + bool "Enable SIF1 (/dev/ttySM1)" + depends on MN10300_TTYSM && MN10300_PROC_HAS_TTYSM1 + help + Enable access to SIF1 through /dev/ttySM1 or gdb-stub + +choice + prompt "Select the timer to supply the clock for SIF1" + default MN10300_TTYSM1_TIMER12 \ + if !(AM33_2 || AM33_3) + default MN10300_TTYSM1_TIMER9 \ + if AM33_2 || AM33_3 + depends on MN10300_TTYSM1 + +config MN10300_TTYSM1_TIMER12 + bool "Use timer 12 (16-bit)" + depends on !(AM33_2 || AM33_3) + +config MN10300_TTYSM1_TIMER9 + bool "Use timer 9 (16-bit)" + depends on AM33_2 || AM33_3 + +config MN10300_TTYSM1_TIMER3 + bool "Use timer 3 (8-bit)" + depends on AM33_2 || AM33_3 + +endchoice + +# +# /dev/ttySM2 +# +config MN10300_TTYSM2 + bool "Enable SIF2 (/dev/ttySM2)" + depends on MN10300_TTYSM && MN10300_PROC_HAS_TTYSM2 + help + Enable access to SIF2 through /dev/ttySM2 or gdb-stub + +choice + prompt "Select the timer to supply the clock for SIF2" + default MN10300_TTYSM2_TIMER3 \ + if !(AM33_2 || AM33_3) + default MN10300_TTYSM2_TIMER10 \ + if AM33_2 || AM33_3 + depends on MN10300_TTYSM2 + +config MN10300_TTYSM2_TIMER9 + bool "Use timer 9 (16-bit)" + depends on !(AM33_2 || AM33_3) + +config MN10300_TTYSM2_TIMER1 + bool "Use timer 1 (8-bit)" + depends on !(AM33_2 || AM33_3) + +config MN10300_TTYSM2_TIMER3 + bool "Use timer 3 (8-bit)" + depends on !(AM33_2 || AM33_3) + +config MN10300_TTYSM2_TIMER10 + bool "Use timer 10 (16-bit)" + depends on AM33_2 || AM33_3 + +endchoice + +config MN10300_TTYSM2_CTS + bool "Enable the use of the CTS line /dev/ttySM2" + depends on MN10300_TTYSM2 && AM33_2 + +endmenu + +menu "Interrupt request priority options" + +comment "[!] NOTE: A lower number/level indicates a higher priority (0 is highest, 6 is lowest)" + +comment "____Non-maskable interrupt levels____" +comment "The following must be set to a higher priority than local_irq_disable() and on-chip serial" + +config DEBUGGER_IRQ_LEVEL + int "DEBUGGER interrupt priority" + depends on KERNEL_DEBUGGER + range 0 1 if LINUX_CLI_LEVEL = 2 + range 0 2 if LINUX_CLI_LEVEL = 3 + range 0 3 if LINUX_CLI_LEVEL = 4 + range 0 4 if LINUX_CLI_LEVEL = 5 + range 0 5 if LINUX_CLI_LEVEL = 6 + default 0 + +comment "The following must be set to a higher priority than local_irq_disable()" + +config MN10300_SERIAL_IRQ_LEVEL + int "MN10300 on-chip serial interrupt priority" + depends on MN10300_TTYSM + range 1 1 if LINUX_CLI_LEVEL = 2 + range 1 2 if LINUX_CLI_LEVEL = 3 + range 1 3 if LINUX_CLI_LEVEL = 4 + range 1 4 if LINUX_CLI_LEVEL = 5 + range 1 5 if LINUX_CLI_LEVEL = 6 + default 1 + +comment "-" +comment "____Maskable interrupt levels____" + +config LINUX_CLI_LEVEL + int "The highest interrupt priority excluded by local_irq_disable() (2-6)" + range 2 6 + default 2 + help + local_irq_disable() doesn't actually disable maskable interrupts - + what it does is restrict the levels of interrupt which are permitted + (a lower level indicates a higher priority) by lowering the value in + EPSW.IM from 7. Any interrupt is permitted for which the level is + lower than EPSW.IM. + + Certain interrupts, such as DEBUGGER and virtual MN10300 on-chip + serial DMA interrupts are allowed to interrupt normal disabled + sections. + +comment "The following must be set to a equal to or lower priority than LINUX_CLI_LEVEL" + +config TIMER_IRQ_LEVEL + int "Kernel timer interrupt priority" + range LINUX_CLI_LEVEL 6 + default 4 + +config PCI_IRQ_LEVEL + int "PCI interrupt priority" + depends on PCI + range LINUX_CLI_LEVEL 6 + default 5 + +config ETHERNET_IRQ_LEVEL + int "Ethernet interrupt priority" + depends on SMC91X || SMC911X || SMSC911X + range LINUX_CLI_LEVEL 6 + default 6 + +config EXT_SERIAL_IRQ_LEVEL + int "External serial port interrupt priority" + depends on SERIAL_8250 + range LINUX_CLI_LEVEL 6 + default 6 + +endmenu + +source "mm/Kconfig" + +menu "Power management options" +source kernel/power/Kconfig +endmenu + +endmenu + + +menu "Executable formats" + +source "fs/Kconfig.binfmt" + +endmenu + +source "net/Kconfig" + +source "drivers/Kconfig" + +source "fs/Kconfig" + +source "arch/mn10300/Kconfig.debug" + +source "security/Kconfig" + +source "crypto/Kconfig" + +source "lib/Kconfig" |