diff options
Diffstat (limited to 'arch/powerpc/boot/dts/mpc8641_hpcn.dts')
-rw-r--r-- | arch/powerpc/boot/dts/mpc8641_hpcn.dts | 663 |
1 files changed, 0 insertions, 663 deletions
diff --git a/arch/powerpc/boot/dts/mpc8641_hpcn.dts b/arch/powerpc/boot/dts/mpc8641_hpcn.dts deleted file mode 100644 index 1c03060dd..000000000 --- a/arch/powerpc/boot/dts/mpc8641_hpcn.dts +++ /dev/null @@ -1,663 +0,0 @@ -/* - * MPC8641 HPCN Device Tree Source - * - * Copyright 2006 Freescale Semiconductor Inc. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - */ - -/dts-v1/; - -/ { - model = "MPC8641HPCN"; - compatible = "fsl,mpc8641hpcn"; - #address-cells = <1>; - #size-cells = <1>; - - aliases { - ethernet0 = &enet0; - ethernet1 = &enet1; - ethernet2 = &enet2; - ethernet3 = &enet3; - serial0 = &serial0; - serial1 = &serial1; - pci0 = &pci0; - pci1 = &pci1; - }; - - cpus { - #address-cells = <1>; - #size-cells = <0>; - - PowerPC,8641@0 { - device_type = "cpu"; - reg = <0>; - d-cache-line-size = <32>; - i-cache-line-size = <32>; - d-cache-size = <32768>; // L1 - i-cache-size = <32768>; // L1 - timebase-frequency = <0>; // From uboot - bus-frequency = <0>; // From uboot - clock-frequency = <0>; // From uboot - }; - PowerPC,8641@1 { - device_type = "cpu"; - reg = <1>; - d-cache-line-size = <32>; - i-cache-line-size = <32>; - d-cache-size = <32768>; - i-cache-size = <32768>; - timebase-frequency = <0>; // From uboot - bus-frequency = <0>; // From uboot - clock-frequency = <0>; // From uboot - }; - }; - - memory { - device_type = "memory"; - reg = <0x00000000 0x40000000>; // 1G at 0x0 - }; - - localbus@ffe05000 { - #address-cells = <2>; - #size-cells = <1>; - compatible = "fsl,mpc8641-localbus", "simple-bus"; - reg = <0xffe05000 0x1000>; - interrupts = <19 2>; - interrupt-parent = <&mpic>; - - ranges = <0 0 0xef800000 0x00800000 - 2 0 0xffdf8000 0x00008000 - 3 0 0xffdf0000 0x00008000>; - - flash@0,0 { - compatible = "cfi-flash"; - reg = <0 0 0x00800000>; - bank-width = <2>; - device-width = <2>; - #address-cells = <1>; - #size-cells = <1>; - partition@0 { - label = "kernel"; - reg = <0x00000000 0x00300000>; - }; - partition@300000 { - label = "firmware b"; - reg = <0x00300000 0x00100000>; - read-only; - }; - partition@400000 { - label = "fs"; - reg = <0x00400000 0x00300000>; - }; - partition@700000 { - label = "firmware a"; - reg = <0x00700000 0x00100000>; - read-only; - }; - }; - }; - - soc8641@ffe00000 { - #address-cells = <1>; - #size-cells = <1>; - device_type = "soc"; - compatible = "simple-bus"; - ranges = <0x00000000 0xffe00000 0x00100000>; - bus-frequency = <0>; - - mcm-law@0 { - compatible = "fsl,mcm-law"; - reg = <0x0 0x1000>; - fsl,num-laws = <10>; - }; - - mcm@1000 { - compatible = "fsl,mpc8641-mcm", "fsl,mcm"; - reg = <0x1000 0x1000>; - interrupts = <17 2>; - interrupt-parent = <&mpic>; - }; - - i2c@3000 { - #address-cells = <1>; - #size-cells = <0>; - cell-index = <0>; - compatible = "fsl-i2c"; - reg = <0x3000 0x100>; - interrupts = <43 2>; - interrupt-parent = <&mpic>; - dfsrr; - }; - - i2c@3100 { - #address-cells = <1>; - #size-cells = <0>; - cell-index = <1>; - compatible = "fsl-i2c"; - reg = <0x3100 0x100>; - interrupts = <43 2>; - interrupt-parent = <&mpic>; - dfsrr; - }; - - dma@21300 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "fsl,mpc8641-dma", "fsl,eloplus-dma"; - reg = <0x21300 0x4>; - ranges = <0x0 0x21100 0x200>; - cell-index = <0>; - dma-channel@0 { - compatible = "fsl,mpc8641-dma-channel", - "fsl,eloplus-dma-channel"; - reg = <0x0 0x80>; - cell-index = <0>; - interrupt-parent = <&mpic>; - interrupts = <20 2>; - }; - dma-channel@80 { - compatible = "fsl,mpc8641-dma-channel", - "fsl,eloplus-dma-channel"; - reg = <0x80 0x80>; - cell-index = <1>; - interrupt-parent = <&mpic>; - interrupts = <21 2>; - }; - dma-channel@100 { - compatible = "fsl,mpc8641-dma-channel", - "fsl,eloplus-dma-channel"; - reg = <0x100 0x80>; - cell-index = <2>; - interrupt-parent = <&mpic>; - interrupts = <22 2>; - }; - dma-channel@180 { - compatible = "fsl,mpc8641-dma-channel", - "fsl,eloplus-dma-channel"; - reg = <0x180 0x80>; - cell-index = <3>; - interrupt-parent = <&mpic>; - interrupts = <23 2>; - }; - }; - - enet0: ethernet@24000 { - #address-cells = <1>; - #size-cells = <1>; - cell-index = <0>; - device_type = "network"; - model = "TSEC"; - compatible = "gianfar"; - reg = <0x24000 0x1000>; - ranges = <0x0 0x24000 0x1000>; - local-mac-address = [ 00 00 00 00 00 00 ]; - interrupts = <29 2 30 2 34 2>; - interrupt-parent = <&mpic>; - tbi-handle = <&tbi0>; - phy-handle = <&phy0>; - phy-connection-type = "rgmii-id"; - - mdio@520 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "fsl,gianfar-mdio"; - reg = <0x520 0x20>; - - phy0: ethernet-phy@0 { - interrupt-parent = <&mpic>; - interrupts = <10 1>; - reg = <0>; - }; - phy1: ethernet-phy@1 { - interrupt-parent = <&mpic>; - interrupts = <10 1>; - reg = <1>; - }; - phy2: ethernet-phy@2 { - interrupt-parent = <&mpic>; - interrupts = <10 1>; - reg = <2>; - }; - phy3: ethernet-phy@3 { - interrupt-parent = <&mpic>; - interrupts = <10 1>; - reg = <3>; - }; - tbi0: tbi-phy@11 { - reg = <0x11>; - device_type = "tbi-phy"; - }; - }; - }; - - enet1: ethernet@25000 { - #address-cells = <1>; - #size-cells = <1>; - cell-index = <1>; - device_type = "network"; - model = "TSEC"; - compatible = "gianfar"; - reg = <0x25000 0x1000>; - ranges = <0x0 0x25000 0x1000>; - local-mac-address = [ 00 00 00 00 00 00 ]; - interrupts = <35 2 36 2 40 2>; - interrupt-parent = <&mpic>; - tbi-handle = <&tbi1>; - phy-handle = <&phy1>; - phy-connection-type = "rgmii-id"; - - mdio@520 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "fsl,gianfar-tbi"; - reg = <0x520 0x20>; - - tbi1: tbi-phy@11 { - reg = <0x11>; - device_type = "tbi-phy"; - }; - }; - }; - - enet2: ethernet@26000 { - #address-cells = <1>; - #size-cells = <1>; - cell-index = <2>; - device_type = "network"; - model = "TSEC"; - compatible = "gianfar"; - reg = <0x26000 0x1000>; - ranges = <0x0 0x26000 0x1000>; - local-mac-address = [ 00 00 00 00 00 00 ]; - interrupts = <31 2 32 2 33 2>; - interrupt-parent = <&mpic>; - tbi-handle = <&tbi2>; - phy-handle = <&phy2>; - phy-connection-type = "rgmii-id"; - - mdio@520 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "fsl,gianfar-tbi"; - reg = <0x520 0x20>; - - tbi2: tbi-phy@11 { - reg = <0x11>; - device_type = "tbi-phy"; - }; - }; - }; - - enet3: ethernet@27000 { - #address-cells = <1>; - #size-cells = <1>; - cell-index = <3>; - device_type = "network"; - model = "TSEC"; - compatible = "gianfar"; - reg = <0x27000 0x1000>; - ranges = <0x0 0x27000 0x1000>; - local-mac-address = [ 00 00 00 00 00 00 ]; - interrupts = <37 2 38 2 39 2>; - interrupt-parent = <&mpic>; - tbi-handle = <&tbi3>; - phy-handle = <&phy3>; - phy-connection-type = "rgmii-id"; - - mdio@520 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "fsl,gianfar-tbi"; - reg = <0x520 0x20>; - - tbi3: tbi-phy@11 { - reg = <0x11>; - device_type = "tbi-phy"; - }; - }; - }; - - serial0: serial@4500 { - cell-index = <0>; - device_type = "serial"; - compatible = "fsl,ns16550", "ns16550"; - reg = <0x4500 0x100>; - clock-frequency = <0>; - interrupts = <42 2>; - interrupt-parent = <&mpic>; - }; - - serial1: serial@4600 { - cell-index = <1>; - device_type = "serial"; - compatible = "fsl,ns16550", "ns16550"; - reg = <0x4600 0x100>; - clock-frequency = <0>; - interrupts = <28 2>; - interrupt-parent = <&mpic>; - }; - - mpic: pic@40000 { - interrupt-controller; - #address-cells = <0>; - #interrupt-cells = <2>; - reg = <0x40000 0x40000>; - compatible = "chrp,open-pic"; - device_type = "open-pic"; - }; - - rmu: rmu@d3000 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "fsl,srio-rmu"; - reg = <0xd3000 0x500>; - ranges = <0x0 0xd3000 0x500>; - - message-unit@0 { - compatible = "fsl,srio-msg-unit"; - reg = <0x0 0x100>; - interrupts = < - 53 2 /* msg1_tx_irq */ - 54 2>;/* msg1_rx_irq */ - }; - message-unit@100 { - compatible = "fsl,srio-msg-unit"; - reg = <0x100 0x100>; - interrupts = < - 55 2 /* msg2_tx_irq */ - 56 2>;/* msg2_rx_irq */ - }; - doorbell-unit@400 { - compatible = "fsl,srio-dbell-unit"; - reg = <0x400 0x80>; - interrupts = < - 49 2 /* bell_outb_irq */ - 50 2>;/* bell_inb_irq */ - }; - port-write-unit@4e0 { - compatible = "fsl,srio-port-write-unit"; - reg = <0x4e0 0x20>; - interrupts = <48 2>; - }; - }; - - global-utilities@e0000 { - compatible = "fsl,mpc8641-guts"; - reg = <0xe0000 0x1000>; - fsl,has-rstcr; - }; - }; - - pci0: pcie@ffe08000 { - compatible = "fsl,mpc8641-pcie"; - device_type = "pci"; - #interrupt-cells = <1>; - #size-cells = <2>; - #address-cells = <3>; - reg = <0xffe08000 0x1000>; - bus-range = <0x0 0xff>; - ranges = <0x02000000 0x0 0x80000000 0x80000000 0x0 0x20000000 - 0x01000000 0x0 0x00000000 0xffc00000 0x0 0x00010000>; - clock-frequency = <33333333>; - interrupt-parent = <&mpic>; - interrupts = <24 2>; - interrupt-map-mask = <0xff00 0 0 7>; - interrupt-map = < - /* IDSEL 0x11 func 0 - PCI slot 1 */ - 0x8800 0 0 1 &mpic 2 1 - 0x8800 0 0 2 &mpic 3 1 - 0x8800 0 0 3 &mpic 4 1 - 0x8800 0 0 4 &mpic 1 1 - - /* IDSEL 0x11 func 1 - PCI slot 1 */ - 0x8900 0 0 1 &mpic 2 1 - 0x8900 0 0 2 &mpic 3 1 - 0x8900 0 0 3 &mpic 4 1 - 0x8900 0 0 4 &mpic 1 1 - - /* IDSEL 0x11 func 2 - PCI slot 1 */ - 0x8a00 0 0 1 &mpic 2 1 - 0x8a00 0 0 2 &mpic 3 1 - 0x8a00 0 0 3 &mpic 4 1 - 0x8a00 0 0 4 &mpic 1 1 - - /* IDSEL 0x11 func 3 - PCI slot 1 */ - 0x8b00 0 0 1 &mpic 2 1 - 0x8b00 0 0 2 &mpic 3 1 - 0x8b00 0 0 3 &mpic 4 1 - 0x8b00 0 0 4 &mpic 1 1 - - /* IDSEL 0x11 func 4 - PCI slot 1 */ - 0x8c00 0 0 1 &mpic 2 1 - 0x8c00 0 0 2 &mpic 3 1 - 0x8c00 0 0 3 &mpic 4 1 - 0x8c00 0 0 4 &mpic 1 1 - - /* IDSEL 0x11 func 5 - PCI slot 1 */ - 0x8d00 0 0 1 &mpic 2 1 - 0x8d00 0 0 2 &mpic 3 1 - 0x8d00 0 0 3 &mpic 4 1 - 0x8d00 0 0 4 &mpic 1 1 - - /* IDSEL 0x11 func 6 - PCI slot 1 */ - 0x8e00 0 0 1 &mpic 2 1 - 0x8e00 0 0 2 &mpic 3 1 - 0x8e00 0 0 3 &mpic 4 1 - 0x8e00 0 0 4 &mpic 1 1 - - /* IDSEL 0x11 func 7 - PCI slot 1 */ - 0x8f00 0 0 1 &mpic 2 1 - 0x8f00 0 0 2 &mpic 3 1 - 0x8f00 0 0 3 &mpic 4 1 - 0x8f00 0 0 4 &mpic 1 1 - - /* IDSEL 0x12 func 0 - PCI slot 2 */ - 0x9000 0 0 1 &mpic 3 1 - 0x9000 0 0 2 &mpic 4 1 - 0x9000 0 0 3 &mpic 1 1 - 0x9000 0 0 4 &mpic 2 1 - - /* IDSEL 0x12 func 1 - PCI slot 2 */ - 0x9100 0 0 1 &mpic 3 1 - 0x9100 0 0 2 &mpic 4 1 - 0x9100 0 0 3 &mpic 1 1 - 0x9100 0 0 4 &mpic 2 1 - - /* IDSEL 0x12 func 2 - PCI slot 2 */ - 0x9200 0 0 1 &mpic 3 1 - 0x9200 0 0 2 &mpic 4 1 - 0x9200 0 0 3 &mpic 1 1 - 0x9200 0 0 4 &mpic 2 1 - - /* IDSEL 0x12 func 3 - PCI slot 2 */ - 0x9300 0 0 1 &mpic 3 1 - 0x9300 0 0 2 &mpic 4 1 - 0x9300 0 0 3 &mpic 1 1 - 0x9300 0 0 4 &mpic 2 1 - - /* IDSEL 0x12 func 4 - PCI slot 2 */ - 0x9400 0 0 1 &mpic 3 1 - 0x9400 0 0 2 &mpic 4 1 - 0x9400 0 0 3 &mpic 1 1 - 0x9400 0 0 4 &mpic 2 1 - - /* IDSEL 0x12 func 5 - PCI slot 2 */ - 0x9500 0 0 1 &mpic 3 1 - 0x9500 0 0 2 &mpic 4 1 - 0x9500 0 0 3 &mpic 1 1 - 0x9500 0 0 4 &mpic 2 1 - - /* IDSEL 0x12 func 6 - PCI slot 2 */ - 0x9600 0 0 1 &mpic 3 1 - 0x9600 0 0 2 &mpic 4 1 - 0x9600 0 0 3 &mpic 1 1 - 0x9600 0 0 4 &mpic 2 1 - - /* IDSEL 0x12 func 7 - PCI slot 2 */ - 0x9700 0 0 1 &mpic 3 1 - 0x9700 0 0 2 &mpic 4 1 - 0x9700 0 0 3 &mpic 1 1 - 0x9700 0 0 4 &mpic 2 1 - - // IDSEL 0x1c USB - 0xe000 0 0 1 &i8259 12 2 - 0xe100 0 0 2 &i8259 9 2 - 0xe200 0 0 3 &i8259 10 2 - 0xe300 0 0 4 &i8259 11 2 - - // IDSEL 0x1d Audio - 0xe800 0 0 1 &i8259 6 2 - - // IDSEL 0x1e Legacy - 0xf000 0 0 1 &i8259 7 2 - 0xf100 0 0 1 &i8259 7 2 - - // IDSEL 0x1f IDE/SATA - 0xf800 0 0 1 &i8259 14 2 - 0xf900 0 0 1 &i8259 5 2 - >; - - pcie@0 { - reg = <0 0 0 0 0>; - #size-cells = <2>; - #address-cells = <3>; - device_type = "pci"; - ranges = <0x02000000 0x0 0x80000000 - 0x02000000 0x0 0x80000000 - 0x0 0x20000000 - - 0x01000000 0x0 0x00000000 - 0x01000000 0x0 0x00000000 - 0x0 0x00010000>; - uli1575@0 { - reg = <0 0 0 0 0>; - #size-cells = <2>; - #address-cells = <3>; - ranges = <0x02000000 0x0 0x80000000 - 0x02000000 0x0 0x80000000 - 0x0 0x20000000 - 0x01000000 0x0 0x00000000 - 0x01000000 0x0 0x00000000 - 0x0 0x00010000>; - isa@1e { - device_type = "isa"; - #interrupt-cells = <2>; - #size-cells = <1>; - #address-cells = <2>; - reg = <0xf000 0 0 0 0>; - ranges = <1 0 0x01000000 0 0 - 0x00001000>; - interrupt-parent = <&i8259>; - - i8259: interrupt-controller@20 { - reg = <1 0x20 2 - 1 0xa0 2 - 1 0x4d0 2>; - interrupt-controller; - device_type = "interrupt-controller"; - #address-cells = <0>; - #interrupt-cells = <2>; - compatible = "chrp,iic"; - interrupts = <9 2>; - interrupt-parent = <&mpic>; - }; - - i8042@60 { - #size-cells = <0>; - #address-cells = <1>; - reg = <1 0x60 1 1 0x64 1>; - interrupts = <1 3 12 3>; - interrupt-parent = - <&i8259>; - - keyboard@0 { - reg = <0>; - compatible = "pnpPNP,303"; - }; - - mouse@1 { - reg = <1>; - compatible = "pnpPNP,f03"; - }; - }; - - rtc@70 { - compatible = - "pnpPNP,b00"; - reg = <1 0x70 2>; - }; - - gpio@400 { - reg = <1 0x400 0x80>; - }; - }; - }; - }; - - }; - - pci1: pcie@ffe09000 { - compatible = "fsl,mpc8641-pcie"; - device_type = "pci"; - #interrupt-cells = <1>; - #size-cells = <2>; - #address-cells = <3>; - reg = <0xffe09000 0x1000>; - bus-range = <0 0xff>; - ranges = <0x02000000 0x0 0xa0000000 0xa0000000 0x0 0x20000000 - 0x01000000 0x0 0x00000000 0xffc10000 0x0 0x00010000>; - clock-frequency = <33333333>; - interrupt-parent = <&mpic>; - interrupts = <25 2>; - interrupt-map-mask = <0xf800 0 0 7>; - interrupt-map = < - /* IDSEL 0x0 */ - 0x0000 0 0 1 &mpic 4 1 - 0x0000 0 0 2 &mpic 5 1 - 0x0000 0 0 3 &mpic 6 1 - 0x0000 0 0 4 &mpic 7 1 - >; - pcie@0 { - reg = <0 0 0 0 0>; - #size-cells = <2>; - #address-cells = <3>; - device_type = "pci"; - ranges = <0x02000000 0x0 0xa0000000 - 0x02000000 0x0 0xa0000000 - 0x0 0x20000000 - - 0x01000000 0x0 0x00000000 - 0x01000000 0x0 0x00000000 - 0x0 0x00010000>; - }; - }; -/* - * Only one of Rapid IO or PCI can be present due to HW limitations and - * due to the fact that the 2 now share address space in the new memory - * map. The most likely case is that we have PCI, so comment out the - * rapidio node. Leave it here for reference. - - rapidio@ffec0000 { - reg = <0xffec0000 0x11000>; - compatible = "fsl,srio"; - interrupt-parent = <&mpic>; - interrupts = <48 2>; - #address-cells = <2>; - #size-cells = <2>; - fsl,srio-rmu-handle = <&rmu>; - ranges; - - port1 { - #address-cells = <2>; - #size-cells = <2>; - cell-index = <1>; - ranges = <0 0 0x80000000 0 0x20000000>; - }; - }; -*/ - -}; |