diff options
Diffstat (limited to 'arch/powerpc/boot/dts/p3041ds.dts')
-rw-r--r-- | arch/powerpc/boot/dts/p3041ds.dts | 284 |
1 files changed, 0 insertions, 284 deletions
diff --git a/arch/powerpc/boot/dts/p3041ds.dts b/arch/powerpc/boot/dts/p3041ds.dts deleted file mode 100644 index eca6c697c..000000000 --- a/arch/powerpc/boot/dts/p3041ds.dts +++ /dev/null @@ -1,284 +0,0 @@ -/* - * P3041DS Device Tree Source - * - * Copyright 2010 - 2014 Freescale Semiconductor Inc. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions are met: - * * Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * * Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * * Neither the name of Freescale Semiconductor nor the - * names of its contributors may be used to endorse or promote products - * derived from this software without specific prior written permission. - * - * - * ALTERNATIVELY, this software may be distributed under the terms of the - * GNU General Public License ("GPL") as published by the Free Software - * Foundation, either version 2 of that License or (at your option) any - * later version. - * - * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY - * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED - * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE - * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY - * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES - * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; - * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND - * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS - * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - */ - -/include/ "fsl/p3041si-pre.dtsi" - -/ { - model = "fsl,P3041DS"; - compatible = "fsl,P3041DS"; - #address-cells = <2>; - #size-cells = <2>; - interrupt-parent = <&mpic>; - - memory { - device_type = "memory"; - }; - - reserved-memory { - #address-cells = <2>; - #size-cells = <2>; - ranges; - - bman_fbpr: bman-fbpr { - size = <0 0x1000000>; - alignment = <0 0x1000000>; - }; - qman_fqd: qman-fqd { - size = <0 0x400000>; - alignment = <0 0x400000>; - }; - qman_pfdr: qman-pfdr { - size = <0 0x2000000>; - alignment = <0 0x2000000>; - }; - }; - - dcsr: dcsr@f00000000 { - ranges = <0x00000000 0xf 0x00000000 0x01008000>; - }; - - bportals: bman-portals@ff4000000 { - ranges = <0x0 0xf 0xf4000000 0x200000>; - }; - - qportals: qman-portals@ff4200000 { - ranges = <0x0 0xf 0xf4200000 0x200000>; - }; - - soc: soc@ffe000000 { - ranges = <0x00000000 0xf 0xfe000000 0x1000000>; - reg = <0xf 0xfe000000 0 0x00001000>; - spi@110000 { - flash@0 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "spansion,s25sl12801"; - reg = <0>; - spi-max-frequency = <35000000>; /* input clock */ - partition@u-boot { - label = "u-boot"; - reg = <0x00000000 0x00100000>; - read-only; - }; - partition@kernel { - label = "kernel"; - reg = <0x00100000 0x00500000>; - read-only; - }; - partition@dtb { - label = "dtb"; - reg = <0x00600000 0x00100000>; - read-only; - }; - partition@fs { - label = "file system"; - reg = <0x00700000 0x00900000>; - }; - }; - }; - - i2c@118100 { - eeprom@51 { - compatible = "at24,24c256"; - reg = <0x51>; - }; - eeprom@52 { - compatible = "at24,24c256"; - reg = <0x52>; - }; - }; - - i2c@119100 { - rtc@68 { - compatible = "dallas,ds3232"; - reg = <0x68>; - interrupts = <0x1 0x1 0 0>; - }; - ina220@40 { - compatible = "ti,ina220"; - reg = <0x40>; - shunt-resistor = <1000>; - }; - ina220@41 { - compatible = "ti,ina220"; - reg = <0x41>; - shunt-resistor = <1000>; - }; - ina220@44 { - compatible = "ti,ina220"; - reg = <0x44>; - shunt-resistor = <1000>; - }; - ina220@45 { - compatible = "ti,ina220"; - reg = <0x45>; - shunt-resistor = <1000>; - }; - adt7461@4c { - compatible = "adi,adt7461"; - reg = <0x4c>; - }; - }; - }; - - rio: rapidio@ffe0c0000 { - reg = <0xf 0xfe0c0000 0 0x11000>; - - port1 { - ranges = <0 0 0xc 0x20000000 0 0x10000000>; - }; - port2 { - ranges = <0 0 0xc 0x30000000 0 0x10000000>; - }; - }; - - lbc: localbus@ffe124000 { - reg = <0xf 0xfe124000 0 0x1000>; - ranges = <0 0 0xf 0xe8000000 0x08000000 - 2 0 0xf 0xffa00000 0x00040000 - 3 0 0xf 0xffdf0000 0x00008000>; - - flash@0,0 { - compatible = "cfi-flash"; - reg = <0 0 0x08000000>; - bank-width = <2>; - device-width = <2>; - }; - - nand@2,0 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "fsl,elbc-fcm-nand"; - reg = <0x2 0x0 0x40000>; - - partition@0 { - label = "NAND U-Boot Image"; - reg = <0x0 0x02000000>; - read-only; - }; - - partition@2000000 { - label = "NAND Root File System"; - reg = <0x02000000 0x10000000>; - }; - - partition@12000000 { - label = "NAND Compressed RFS Image"; - reg = <0x12000000 0x08000000>; - }; - - partition@1a000000 { - label = "NAND Linux Kernel Image"; - reg = <0x1a000000 0x04000000>; - }; - - partition@1e000000 { - label = "NAND DTB Image"; - reg = <0x1e000000 0x01000000>; - }; - - partition@1f000000 { - label = "NAND Writable User area"; - reg = <0x1f000000 0x21000000>; - }; - }; - - board-control@3,0 { - compatible = "fsl,p3041ds-fpga", "fsl,fpga-ngpixis"; - reg = <3 0 0x30>; - }; - }; - - pci0: pcie@ffe200000 { - reg = <0xf 0xfe200000 0 0x1000>; - ranges = <0x02000000 0 0xe0000000 0xc 0x00000000 0x0 0x20000000 - 0x01000000 0 0x00000000 0xf 0xf8000000 0x0 0x00010000>; - pcie@0 { - ranges = <0x02000000 0 0xe0000000 - 0x02000000 0 0xe0000000 - 0 0x20000000 - - 0x01000000 0 0x00000000 - 0x01000000 0 0x00000000 - 0 0x00010000>; - }; - }; - - pci1: pcie@ffe201000 { - reg = <0xf 0xfe201000 0 0x1000>; - ranges = <0x02000000 0x0 0xe0000000 0xc 0x20000000 0x0 0x20000000 - 0x01000000 0x0 0x00000000 0xf 0xf8010000 0x0 0x00010000>; - pcie@0 { - ranges = <0x02000000 0 0xe0000000 - 0x02000000 0 0xe0000000 - 0 0x20000000 - - 0x01000000 0 0x00000000 - 0x01000000 0 0x00000000 - 0 0x00010000>; - }; - }; - - pci2: pcie@ffe202000 { - reg = <0xf 0xfe202000 0 0x1000>; - ranges = <0x02000000 0 0xe0000000 0xc 0x40000000 0 0x20000000 - 0x01000000 0 0x00000000 0xf 0xf8020000 0 0x00010000>; - pcie@0 { - ranges = <0x02000000 0 0xe0000000 - 0x02000000 0 0xe0000000 - 0 0x20000000 - - 0x01000000 0 0x00000000 - 0x01000000 0 0x00000000 - 0 0x00010000>; - }; - }; - - pci3: pcie@ffe203000 { - reg = <0xf 0xfe203000 0 0x1000>; - ranges = <0x02000000 0 0xe0000000 0xc 0x60000000 0 0x20000000 - 0x01000000 0 0x00000000 0xf 0xf8030000 0 0x00010000>; - pcie@0 { - ranges = <0x02000000 0 0xe0000000 - 0x02000000 0 0xe0000000 - 0 0x20000000 - - 0x01000000 0 0x00000000 - 0x01000000 0 0x00000000 - 0 0x00010000>; - }; - }; -}; - -/include/ "fsl/p3041si-post.dtsi" |