diff options
Diffstat (limited to 'arch/powerpc/boot/dts')
354 files changed, 70918 insertions, 0 deletions
diff --git a/arch/powerpc/boot/dts/a3m071.dts b/arch/powerpc/boot/dts/a3m071.dts new file mode 100644 index 000000000..bf81b8f97 --- /dev/null +++ b/arch/powerpc/boot/dts/a3m071.dts @@ -0,0 +1,142 @@ +/* + * a3m071 board Device Tree Source + * + * Copyright 2012 Stefan Roese <sr@denx.de> + * + * Copyright (C) 2011 DENX Software Engineering GmbH + * Heiko Schocher <hs@denx.de> + * + * Copyright (C) 2007 Semihalf + * Marian Balakowicz <m8@semihalf.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +/include/ "mpc5200b.dtsi" + +&gpt0 { fsl,has-wdt; }; + +/ { + model = "anonymous,a3m071"; + compatible = "anonymous,a3m071"; + + soc5200@f0000000 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,mpc5200b-immr"; + ranges = <0 0xf0000000 0x0000c000>; + reg = <0xf0000000 0x00000100>; + bus-frequency = <0>; /* From boot loader */ + system-frequency = <0>; /* From boot loader */ + + spi@f00 { + status = "disabled"; + }; + + usb: usb@1000 { + status = "disabled"; + }; + + psc@2000 { + compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart"; + reg = <0x2000 0x100>; + interrupts = <2 1 0>; + }; + + psc@2200 { + status = "disabled"; + }; + + psc@2400 { + status = "disabled"; + }; + + psc@2600 { + status = "disabled"; + }; + + psc@2800 { + status = "disabled"; + }; + + psc@2c00 { // PSC6 + compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart"; + reg = <0x2c00 0x100>; + interrupts = <2 4 0>; + }; + + ethernet@3000 { + phy-handle = <&phy0>; + }; + + mdio@3000 { + phy0: ethernet-phy@3 { + reg = <0x03>; + }; + }; + + ata@3a00 { + status = "disabled"; + }; + + i2c@3d00 { + status = "disabled"; + }; + + i2c@3d40 { + status = "disabled"; + }; + }; + + localbus { + compatible = "fsl,mpc5200b-lpb","simple-bus"; + #address-cells = <2>; + #size-cells = <1>; + ranges = <0 0 0xfc000000 0x02000000 + 3 0 0xe9000000 0x00080000 + 5 0 0xe8000000 0x00010000>; + + flash@0,0 { + #address-cells = <1>; + #size-cells = <1>; + reg = <0 0x0 0x02000000>; + compatible = "cfi-flash"; + bank-width = <2>; + partition@0x0 { + label = "u-boot"; + reg = <0x00000000 0x00040000>; + read-only; + }; + partition@0x00040000 { + label = "env"; + reg = <0x00040000 0x00020000>; + }; + partition@0x00060000 { + label = "dtb"; + reg = <0x00060000 0x00020000>; + }; + partition@0x00080000 { + label = "kernel"; + reg = <0x00080000 0x00500000>; + }; + partition@0x00580000 { + label = "root"; + reg = <0x00580000 0x00A80000>; + }; + }; + + fpga@3,0 { + compatible = "anonymous,a3m071-fpga"; + reg = <3 0x0 0x00080000 + 5 0x0 0x00010000>; + interrupts = <0 0 3>; /* level low */ + }; + }; + + pci@f0000d00 { + status = "disabled"; + }; +}; diff --git a/arch/powerpc/boot/dts/a4m072.dts b/arch/powerpc/boot/dts/a4m072.dts new file mode 100644 index 000000000..1f02034c7 --- /dev/null +++ b/arch/powerpc/boot/dts/a4m072.dts @@ -0,0 +1,151 @@ +/* + * a4m072 board Device Tree Source + * + * Copyright (C) 2011 DENX Software Engineering GmbH + * Heiko Schocher <hs@denx.de> + * + * Copyright (C) 2007 Semihalf + * Marian Balakowicz <m8@semihalf.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +/include/ "mpc5200b.dtsi" + +&gpt0 { fsl,has-wdt; }; +&gpt3 { gpio-controller; }; +&gpt4 { gpio-controller; }; +&gpt5 { gpio-controller; }; + +/ { + model = "anonymous,a4m072"; + compatible = "anonymous,a4m072"; + + soc5200@f0000000 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,mpc5200b-immr"; + ranges = <0 0xf0000000 0x0000c000>; + reg = <0xf0000000 0x00000100>; + bus-frequency = <0>; /* From boot loader */ + system-frequency = <0>; /* From boot loader */ + + cdm@200 { + fsl,init-ext-48mhz-en = <0x0>; + fsl,init-fd-enable = <0x01>; + fsl,init-fd-counters = <0x3333>; + }; + + spi@f00 { + status = "disabled"; + }; + + psc@2000 { + compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart"; + reg = <0x2000 0x100>; + interrupts = <2 1 0>; + }; + + psc@2200 { + compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart"; + reg = <0x2200 0x100>; + interrupts = <2 2 0>; + }; + + psc@2400 { + compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart"; + reg = <0x2400 0x100>; + interrupts = <2 3 0>; + }; + + psc@2600 { + status = "disabled"; + }; + + psc@2800 { + status = "disabled"; + }; + + psc@2c00 { + compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart"; + reg = <0x2c00 0x100>; + interrupts = <2 4 0>; + }; + + ethernet@3000 { + phy-handle = <&phy0>; + }; + + mdio@3000 { + phy0: ethernet-phy@1f { + reg = <0x1f>; + interrupts = <1 2 0>; /* IRQ 2 active low */ + }; + }; + + i2c@3d00 { + status = "disabled"; + }; + + i2c@3d40 { + hwmon@2e { + compatible = "nsc,lm87"; + reg = <0x2e>; + }; + rtc@51 { + compatible = "nxp,rtc8564"; + reg = <0x51>; + }; + }; + }; + + localbus { + compatible = "fsl,mpc5200b-lpb","simple-bus"; + #address-cells = <2>; + #size-cells = <1>; + ranges = <0 0 0xfe000000 0x02000000 + 1 0 0x62000000 0x00400000 + 2 0 0x64000000 0x00200000 + 3 0 0x66000000 0x01000000 + 6 0 0x68000000 0x01000000 + 7 0 0x6a000000 0x00000004>; + + flash@0,0 { + compatible = "cfi-flash"; + reg = <0 0 0x02000000>; + bank-width = <2>; + #size-cells = <1>; + #address-cells = <1>; + }; + sram0@1,0 { + compatible = "mtd-ram"; + reg = <1 0x00000 0x00400000>; + bank-width = <2>; + }; + }; + + pci@f0000d00 { + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + device_type = "pci"; + compatible = "fsl,mpc5200-pci"; + reg = <0xf0000d00 0x100>; + interrupt-map-mask = <0xf800 0 0 7>; + interrupt-map = < + /* IDSEL 0x16 */ + 0xc000 0 0 1 &mpc5200_pic 1 3 3 + 0xc000 0 0 2 &mpc5200_pic 1 3 3 + 0xc000 0 0 3 &mpc5200_pic 1 3 3 + 0xc000 0 0 4 &mpc5200_pic 1 3 3>; + clock-frequency = <0>; /* From boot loader */ + interrupts = <2 8 0 2 9 0 2 10 0>; + bus-range = <0 0>; + ranges = <0x42000000 0 0x80000000 0x80000000 0 0x10000000 + 0x02000000 0 0x90000000 0x90000000 0 0x10000000 + 0x01000000 0 0x00000000 0xa0000000 0 0x01000000>; + }; +}; diff --git a/arch/powerpc/boot/dts/ac14xx.dts b/arch/powerpc/boot/dts/ac14xx.dts new file mode 100644 index 000000000..a1b883730 --- /dev/null +++ b/arch/powerpc/boot/dts/ac14xx.dts @@ -0,0 +1,399 @@ +/* + * Device Tree Source for the MPC5121e based ac14xx board + * + * Copyright 2012 Anatolij Gustschin <agust@denx.de> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + + +#include <mpc5121.dtsi> + +/ { + model = "ac14xx"; + compatible = "ifm,ac14xx", "fsl,mpc5121"; + #address-cells = <1>; + #size-cells = <1>; + + aliases { + serial0 = &serial0; + serial1 = &serial7; + spi4 = &spi4; + spi5 = &spi5; + }; + + cpus { + PowerPC,5121@0 { + timebase-frequency = <40000000>; /* 40 MHz (csb/4) */ + bus-frequency = <160000000>; /* 160 MHz csb bus */ + clock-frequency = <400000000>; /* 400 MHz ppc core */ + }; + }; + + memory { + reg = <0x00000000 0x10000000>; /* 256MB at 0 */ + }; + + nfc@40000000 { + status = "disabled"; + }; + + localbus@80000020 { + ranges = <0x0 0x0 0xfc000000 0x04000000 /* CS0: NOR flash */ + 0x1 0x0 0xe0000000 0x00010000 /* CS1: FRAM */ + 0x2 0x0 0xe0100000 0x00080000 /* CS2: asi1 */ + 0x3 0x0 0xe0300000 0x00020000 /* CS3: comm */ + 0x5 0x0 0xe0400000 0x00010000 /* CS5: safety */ + 0x6 0x0 0xe0200000 0x00080000>; /* CS6: asi2 */ + + flash@0,0 { + compatible = "cfi-flash"; + reg = <0 0x00000000 0x04000000>; + #address-cells = <1>; + #size-cells = <1>; + bank-width = <2>; + device-width = <2>; + + partition@0 { + label = "dtb-kernel-production"; + reg = <0x00000000 0x00400000>; + }; + partition@1 { + label = "filesystem-production"; + reg = <0x00400000 0x03400000>; + }; + + partition@2 { + label = "recovery"; + reg = <0x03800000 0x00700000>; + }; + + partition@3 { + label = "uboot-code"; + reg = <0x03f00000 0x00040000>; + }; + partition@4 { + label = "uboot-env1"; + reg = <0x03f40000 0x00020000>; + }; + partition@5 { + label = "uboot-env2"; + reg = <0x03f60000 0x00020000>; + }; + }; + + fram@1,0 { + compatible = "ifm,ac14xx-fram", "linux,uio-pdrv-genirq"; + reg = <1 0x00000000 0x00010000>; + }; + + asi@2,0 { + /* masters mapping: CS, CS offset, size */ + reg = <2 0x00000000 0x00080000 + 6 0x00000000 0x00080000>; + #address-cells = <1>; + #size-cells = <1>; + compatible = "ifm,ac14xx-asi-fpga"; + gpios = < + &gpio_pic 26 0 /* prog */ + &gpio_pic 27 0 /* done */ + &gpio_pic 10 0 /* reset */ + >; + + master@1 { + interrupts = <20 0x2>; + interrupt-parent = <&gpio_pic>; + chipselect = <2 0x00009000 0x00009100>; + label = "AS-i master 1"; + }; + + master@2 { + interrupts = <21 0x2>; + interrupt-parent = <&gpio_pic>; + chipselect = <6 0x00009000 0x00009100>; + label = "AS-i master 2"; + }; + }; + + netx@3,0 { + compatible = "ifm,netx"; + reg = <0x3 0x00000000 0x00020000>; + chipselect = <3 0x00101140 0x00203100>; + interrupts = <17 0x8>; + gpios = <&gpio_pic 15 0>; + }; + + safety@5,0 { + compatible = "ifm,safety"; + reg = <0x5 0x00000000 0x00010000>; + chipselect = <5 0x00009000 0x00009100>; + interrupts = <22 0x2>; + interrupt-parent = <&gpio_pic>; + gpios = < + &gpio_pic 12 0 /* prog */ + &gpio_pic 11 0 /* done */ + >; + }; + }; + + clocks { + osc { + clock-frequency = <25000000>; + }; + }; + + soc@80000000 { + bus-frequency = <80000000>; /* 80 MHz ips bus */ + + clock@f00 { + compatible = "fsl,mpc5121rev2-clock", "fsl,mpc5121-clock"; + }; + + /* + * GPIO PIC: + * interrupts cell = <pin nr, sense> + * sense == 8: Level, low assertion + * sense == 2: Edge, high-to-low change + */ + gpio_pic: gpio@1100 { + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + sdhc@1500 { + cd-gpios = <&gpio_pic 23 0>; /* card detect */ + wp-gpios = <&gpio_pic 24 0>; /* write protect */ + wp-inverted; /* WP active high */ + }; + + i2c@1700 { + /* use Fast-mode */ + clock-frequency = <400000>; + + at24@30 { + compatible = "at24,24c01"; + reg = <0x30>; + }; + + at24@31 { + compatible = "at24,24c01"; + reg = <0x31>; + }; + + temp@48 { + compatible = "ad,ad7414"; + reg = <0x48>; + }; + + at24@50 { + compatible = "at24,24c01"; + reg = <0x50>; + }; + + at24@51 { + compatible = "at24,24c01"; + reg = <0x51>; + }; + + at24@52 { + compatible = "at24,24c01"; + reg = <0x52>; + }; + + at24@53 { + compatible = "at24,24c01"; + reg = <0x53>; + }; + + at24@54 { + compatible = "at24,24c01"; + reg = <0x54>; + }; + + at24@55 { + compatible = "at24,24c01"; + reg = <0x55>; + }; + + at24@56 { + compatible = "at24,24c01"; + reg = <0x56>; + }; + + at24@57 { + compatible = "at24,24c01"; + reg = <0x57>; + }; + + rtc@68 { + compatible = "stm,m41t00"; + reg = <0x68>; + }; + }; + + axe_pic: axe-base@2000 { + compatible = "fsl,mpc5121-axe-base"; + reg = <0x2000 0x100>; + interrupts = <42 0x8>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + axe-app { + compatible = "fsl,mpc5121-axe-app"; + interrupt-parent = <&axe_pic>; + interrupts = < + /* soft interrupts */ + 0 0x0 1 0x0 2 0x0 3 0x0 + 4 0x0 5 0x0 6 0x0 7 0x0 + /* fifo interrupts */ + 8 0x0 9 0x0 10 0x0 11 0x0 + >; + }; + + display@2100 { + edid = [00 FF FF FF FF FF FF 00 14 94 00 00 00 00 00 00 + 0A 12 01 03 80 1C 23 78 CA 88 FF 94 52 54 8E 27 + 1E 4C 50 00 00 00 01 01 01 01 01 01 01 01 01 01 + 01 01 01 01 01 01 FB 00 B0 14 00 DC 05 00 08 04 + 21 00 1C 23 00 00 00 18 00 00 00 FD 00 38 3C 1F + 3C 01 0A 20 20 20 20 20 20 20 00 00 00 FC 00 45 + 54 30 31 38 30 30 33 44 4D 55 0A 0A 00 00 00 10 + 00 41 30 30 30 30 30 30 30 30 30 30 30 31 00 D5]; + }; + + can@2300 { + status = "disabled"; + }; + + can@2380 { + status = "disabled"; + }; + + viu@2400 { + status = "disabled"; + }; + + mdio@2800 { + phy0: ethernet-phy@1f { + compatible = "smsc,lan8700"; + reg = <0x1f>; + }; + }; + + enet: ethernet@2800 { + phy-handle = <&phy0>; + }; + + usb@3000 { + status = "disabled"; + }; + + usb@4000 { + status = "disabled"; + }; + + /* PSC3 serial port A, aka ttyPSC0 */ + serial0: psc@11300 { + compatible = "fsl,mpc5121-psc-uart", "fsl,mpc5121-psc"; + fsl,rx-fifo-size = <512>; + fsl,tx-fifo-size = <512>; + }; + + /* PSC4 in SPI mode */ + spi4: psc@11400 { + compatible = "fsl,mpc5121-psc-spi", "fsl,mpc5121-psc"; + fsl,rx-fifo-size = <768>; + fsl,tx-fifo-size = <768>; + #address-cells = <1>; + #size-cells = <0>; + num-cs = <1>; + cs-gpios = <&gpio_pic 25 0>; + + flash: m25p128@0 { + compatible = "st,m25p128"; + spi-max-frequency = <20000000>; + reg = <0>; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "spi-flash0"; + reg = <0x00000000 0x01000000>; + }; + }; + }; + + /* PSC5 in SPI mode */ + spi5: psc@11500 { + compatible = "fsl,mpc5121-psc-spi", "fsl,mpc5121-psc"; + fsl,mode = "spi-master"; + fsl,rx-fifo-size = <128>; + fsl,tx-fifo-size = <128>; + #address-cells = <1>; + #size-cells = <0>; + + lcd@0 { + compatible = "ilitek,ili922x"; + reg = <0>; + spi-max-frequency = <100000>; + spi-cpol; + spi-cpha; + }; + }; + + /* PSC7 serial port C, aka ttyPSC2 */ + serial7: psc@11700 { + compatible = "fsl,mpc5121-psc-uart", "fsl,mpc5121-psc"; + fsl,rx-fifo-size = <512>; + fsl,tx-fifo-size = <512>; + }; + + matrix_keypad@0 { + compatible = "gpio-matrix-keypad"; + debounce-delay-ms = <5>; + col-scan-delay-us = <1>; + gpio-activelow; + col-gpios-binary; + col-switch-delay-ms = <200>; + + col-gpios = <&gpio_pic 1 0>; /* pin1 */ + + row-gpios = <&gpio_pic 2 0 /* pin2 */ + &gpio_pic 3 0 /* pin3 */ + &gpio_pic 4 0>; /* pin4 */ + + linux,keymap = <0x0000006e /* FN LEFT */ + 0x01000067 /* UP */ + 0x02000066 /* FN RIGHT */ + 0x00010069 /* LEFT */ + 0x0101006a /* DOWN */ + 0x0201006c>; /* RIGHT */ + }; + }; + + leds { + compatible = "gpio-leds"; + + backlight { + label = "backlight"; + gpios = <&gpio_pic 0 0>; + default-state = "keep"; + }; + green { + label = "green"; + gpios = <&gpio_pic 18 0>; + default-state = "keep"; + }; + red { + label = "red"; + gpios = <&gpio_pic 19 0>; + default-state = "keep"; + }; + }; +}; diff --git a/arch/powerpc/boot/dts/acadia.dts b/arch/powerpc/boot/dts/acadia.dts new file mode 100644 index 000000000..57291f61f --- /dev/null +++ b/arch/powerpc/boot/dts/acadia.dts @@ -0,0 +1,224 @@ +/* + * Device Tree Source for AMCC Acadia (405EZ) + * + * Copyright IBM Corp. 2008 + * + * This file is licensed under the terms of the GNU General Public License + * version 2. This program is licensed "as is" without any warranty of any + * kind, whether express or implied. + */ + +/dts-v1/; + +/ { + #address-cells = <1>; + #size-cells = <1>; + model = "amcc,acadia"; + compatible = "amcc,acadia"; + dcr-parent = <&{/cpus/cpu@0}>; + + aliases { + ethernet0 = &EMAC0; + serial0 = &UART0; + serial1 = &UART1; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu@0 { + device_type = "cpu"; + model = "PowerPC,405EZ"; + reg = <0x0>; + clock-frequency = <0>; /* Filled in by wrapper */ + timebase-frequency = <0>; /* Filled in by wrapper */ + i-cache-line-size = <32>; + d-cache-line-size = <32>; + i-cache-size = <16384>; + d-cache-size = <16384>; + dcr-controller; + dcr-access-method = "native"; + }; + }; + + memory { + device_type = "memory"; + reg = <0x0 0x0>; /* Filled in by wrapper */ + }; + + UIC0: interrupt-controller { + compatible = "ibm,uic-405ez", "ibm,uic"; + interrupt-controller; + dcr-reg = <0x0c0 0x009>; + cell-index = <0>; + #address-cells = <0>; + #size-cells = <0>; + #interrupt-cells = <2>; + }; + + plb { + compatible = "ibm,plb-405ez", "ibm,plb3"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + clock-frequency = <0>; /* Filled in by wrapper */ + + MAL0: mcmal { + compatible = "ibm,mcmal-405ez", "ibm,mcmal"; + dcr-reg = <0x380 0x62>; + num-tx-chans = <1>; + num-rx-chans = <1>; + interrupt-parent = <&UIC0>; + /* 405EZ has only 3 interrupts to the UIC, as + * SERR, TXDE, and RXDE are or'd together into + * one UIC bit + */ + interrupts = < + 0x13 0x4 /* TXEOB */ + 0x15 0x4 /* RXEOB */ + 0x12 0x4 /* SERR, TXDE, RXDE */>; + }; + + POB0: opb { + compatible = "ibm,opb-405ez", "ibm,opb"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + dcr-reg = <0x0a 0x05>; + clock-frequency = <0>; /* Filled in by wrapper */ + + UART0: serial@ef600300 { + device_type = "serial"; + compatible = "ns16550"; + reg = <0xef600300 0x8>; + virtual-reg = <0xef600300>; + clock-frequency = <0>; /* Filled in by wrapper */ + current-speed = <115200>; + interrupt-parent = <&UIC0>; + interrupts = <0x5 0x4>; + }; + + UART1: serial@ef600400 { + device_type = "serial"; + compatible = "ns16550"; + reg = <0xef600400 0x8>; + clock-frequency = <0>; /* Filled in by wrapper */ + current-speed = <115200>; + interrupt-parent = <&UIC0>; + interrupts = <0x6 0x4>; + }; + + IIC: i2c@ef600500 { + compatible = "ibm,iic-405ez", "ibm,iic"; + reg = <0xef600500 0x11>; + interrupt-parent = <&UIC0>; + interrupts = <0xa 0x4>; + }; + + GPIO0: gpio@ef600700 { + compatible = "ibm,gpio-405ez"; + reg = <0xef600700 0x20>; + }; + + GPIO1: gpio@ef600800 { + compatible = "ibm,gpio-405ez"; + reg = <0xef600800 0x20>; + }; + + EMAC0: ethernet@ef600900 { + device_type = "network"; + compatible = "ibm,emac-405ez", "ibm,emac"; + interrupt-parent = <&UIC0>; + interrupts = < + 0x10 0x4 /* Ethernet */ + 0x11 0x4 /* Ethernet Wake up */>; + local-mac-address = [000000000000]; /* Filled in by wrapper */ + reg = <0xef600900 0x70>; + mal-device = <&MAL0>; + mal-tx-channel = <0>; + mal-rx-channel = <0>; + cell-index = <0>; + max-frame-size = <1500>; + rx-fifo-size = <4096>; + tx-fifo-size = <2048>; + phy-mode = "mii"; + phy-map = <0x0>; + }; + + CAN0: can@ef601000 { + compatible = "amcc,can-405ez"; + reg = <0xef601000 0x620>; + interrupt-parent = <&UIC0>; + interrupts = <0x7 0x4>; + }; + + CAN1: can@ef601800 { + compatible = "amcc,can-405ez"; + reg = <0xef601800 0x620>; + interrupt-parent = <&UIC0>; + interrupts = <0x8 0x4>; + }; + + cameleon@ef602000 { + compatible = "amcc,cameleon-405ez"; + reg = <0xef602000 0x800>; + interrupt-parent = <&UIC0>; + interrupts = <0xb 0x4 0xc 0x4>; + }; + + ieee1588@ef602800 { + compatible = "amcc,ieee1588-405ez"; + reg = <0xef602800 0x60>; + interrupt-parent = <&UIC0>; + interrupts = <0x4 0x4>; + /* This thing is a bit weird. It has it's own UIC + * that it uses to generate snapshot triggers. We + * don't really support this device yet, and it needs + * work to figure this out. + */ + dcr-reg = <0xe0 0x9>; + }; + + usb@ef603000 { + compatible = "ohci-be"; + reg = <0xef603000 0x80>; + interrupts-parent = <&UIC0>; + interrupts = <0xd 0x4 0xe 0x4>; + }; + + dac@ef603300 { + compatible = "amcc,dac-405ez"; + reg = <0xef603300 0x40>; + interrupt-parent = <&UIC0>; + interrupts = <0x18 0x4>; + }; + + adc@ef603400 { + compatible = "amcc,adc-405ez"; + reg = <0xef603400 0x40>; + interrupt-parent = <&UIC0>; + interrupts = <0x17 0x4>; + }; + + spi@ef603500 { + compatible = "amcc,spi-405ez"; + reg = <0xef603500 0x100>; + interrupt-parent = <&UIC0>; + interrupts = <0x9 0x4>; + }; + }; + + EBC0: ebc { + compatible = "ibm,ebc-405ez", "ibm,ebc"; + dcr-reg = <0x12 0x2>; + #address-cells = <2>; + #size-cells = <1>; + clock-frequency = <0>; /* Filled in by wrapper */ + }; + }; + + chosen { + linux,stdout-path = "/plb/opb/serial@ef600300"; + }; +}; diff --git a/arch/powerpc/boot/dts/adder875-redboot.dts b/arch/powerpc/boot/dts/adder875-redboot.dts new file mode 100644 index 000000000..083984720 --- /dev/null +++ b/arch/powerpc/boot/dts/adder875-redboot.dts @@ -0,0 +1,183 @@ +/* + * Device Tree Source for MPC885 ADS running RedBoot + * + * Copyright 2006 MontaVista Software, Inc. + * Copyright 2007 Freescale Semiconductor, Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +/dts-v1/; +/ { + model = "Analogue & Micro Adder MPC875"; + compatible = "analogue-and-micro,adder875"; + #address-cells = <1>; + #size-cells = <1>; + + aliases { + console = &console; + ethernet0 = ð0; + ethernet1 = ð1; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + PowerPC,875@0 { + device_type = "cpu"; + reg = <0>; + d-cache-line-size = <16>; + i-cache-line-size = <16>; + d-cache-size = <8192>; + i-cache-size = <8192>; + timebase-frequency = <0>; + bus-frequency = <0>; + clock-frequency = <0>; + interrupts = <15 2>; // decrementer interrupt + interrupt-parent = <&PIC>; + }; + }; + + memory { + device_type = "memory"; + reg = <0 0x01000000>; + }; + + localbus@fa200100 { + compatible = "fsl,mpc885-localbus", "fsl,pq1-localbus", + "simple-bus"; + #address-cells = <2>; + #size-cells = <1>; + reg = <0xfa200100 0x40>; + + ranges = < + 0 0 0xfe000000 0x00800000 + 2 0 0xfa100000 0x00008000 + >; + + flash@0,0 { + compatible = "cfi-flash"; + reg = <0 0 0x800000>; + bank-width = <2>; + device-width = <2>; + }; + }; + + soc@fa200000 { + compatible = "fsl,mpc875-immr", "fsl,pq1-soc", "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0xfa200000 0x00004000>; + + // Temporary until code stops depending on it. + device_type = "soc"; + + // Temporary until get_immrbase() is fixed. + reg = <0xfa200000 0x4000>; + + mdio@e00 { + compatible = "fsl,mpc875-fec-mdio", "fsl,pq1-fec-mdio"; + reg = <0xe00 0x188>; + #address-cells = <1>; + #size-cells = <0>; + + PHY0: ethernet-phy@0 { + reg = <0>; + }; + + PHY1: ethernet-phy@1 { + reg = <1>; + }; + }; + + eth0: ethernet@e00 { + device_type = "network"; + compatible = "fsl,mpc875-fec-enet", + "fsl,pq1-fec-enet"; + reg = <0xe00 0x188>; + local-mac-address = [ 00 00 00 00 00 00 ]; + interrupts = <3 1>; + interrupt-parent = <&PIC>; + phy-handle = <&PHY0>; + linux,network-index = <0>; + }; + + eth1: ethernet@1e00 { + device_type = "network"; + compatible = "fsl,mpc875-fec-enet", + "fsl,pq1-fec-enet"; + reg = <0x1e00 0x188>; + local-mac-address = [ 00 00 00 00 00 00 ]; + interrupts = <7 1>; + interrupt-parent = <&PIC>; + phy-handle = <&PHY1>; + linux,network-index = <1>; + }; + + PIC: interrupt-controller@0 { + interrupt-controller; + #interrupt-cells = <2>; + reg = <0 0x24>; + compatible = "fsl,mpc875-pic", "fsl,pq1-pic"; + }; + + cpm@9c0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,mpc875-cpm", "fsl,cpm1", "simple-bus"; + interrupts = <0>; // cpm error interrupt + interrupt-parent = <&CPM_PIC>; + reg = <0x9c0 0x40>; + ranges; + + muram { + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x2000 0x2000>; + + data@0 { + compatible = "fsl,cpm-muram-data"; + reg = <0 0x1c00>; + }; + }; + + brg@9f0 { + compatible = "fsl,mpc875-brg", + "fsl,cpm1-brg", + "fsl,cpm-brg"; + clock-frequency = <50000000>; + reg = <0x9f0 0x10>; + }; + + CPM_PIC: interrupt-controller@930 { + interrupt-controller; + #interrupt-cells = <1>; + interrupts = <5 2 0 2>; + interrupt-parent = <&PIC>; + reg = <0x930 0x20>; + compatible = "fsl,mpc875-cpm-pic", + "fsl,cpm1-pic"; + }; + + console: serial@a80 { + device_type = "serial"; + compatible = "fsl,mpc875-smc-uart", + "fsl,cpm1-smc-uart"; + reg = <0xa80 0x10 0x3e80 0x40>; + interrupts = <4>; + interrupt-parent = <&CPM_PIC>; + fsl,cpm-brg = <1>; + fsl,cpm-command = <0x0090>; + current-speed = <115200>; + }; + }; + }; + + chosen { + linux,stdout-path = &console; + }; +}; diff --git a/arch/powerpc/boot/dts/adder875-uboot.dts b/arch/powerpc/boot/dts/adder875-uboot.dts new file mode 100644 index 000000000..e4554caf8 --- /dev/null +++ b/arch/powerpc/boot/dts/adder875-uboot.dts @@ -0,0 +1,182 @@ +/* + * Device Tree Source for MPC885 ADS running U-Boot + * + * Copyright 2006 MontaVista Software, Inc. + * Copyright 2007 Freescale Semiconductor, Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +/dts-v1/; +/ { + model = "Analogue & Micro Adder MPC875"; + compatible = "analogue-and-micro,adder875"; + #address-cells = <1>; + #size-cells = <1>; + + aliases { + console = &console; + ethernet0 = ð0; + ethernet1 = ð1; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + PowerPC,875@0 { + device_type = "cpu"; + reg = <0>; + d-cache-line-size = <16>; + i-cache-line-size = <16>; + d-cache-size = <8192>; + i-cache-size = <8192>; + timebase-frequency = <0>; + bus-frequency = <0>; + clock-frequency = <0>; + interrupts = <15 2>; // decrementer interrupt + interrupt-parent = <&PIC>; + }; + }; + + memory { + device_type = "memory"; + reg = <0 0x01000000>; + }; + + localbus@ff000100 { + compatible = "fsl,mpc885-localbus", "fsl,pq1-localbus", + "simple-bus"; + #address-cells = <2>; + #size-cells = <1>; + reg = <0xff000100 0x40>; + + ranges = < + 0 0 0xfe000000 0x01000000 + >; + + flash@0,0 { + compatible = "cfi-flash"; + reg = <0 0 0x800000>; + bank-width = <2>; + device-width = <2>; + }; + }; + + soc@ff000000 { + compatible = "fsl,mpc875-immr", "fsl,pq1-soc", "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0xff000000 0x00004000>; + + // Temporary until code stops depending on it. + device_type = "soc"; + + // Temporary until get_immrbase() is fixed. + reg = <0xff000000 0x4000>; + + mdio@e00 { + compatible = "fsl,mpc875-fec-mdio", "fsl,pq1-fec-mdio"; + reg = <0xe00 0x188>; + #address-cells = <1>; + #size-cells = <0>; + + PHY0: ethernet-phy@0 { + reg = <0>; + }; + + PHY1: ethernet-phy@1 { + reg = <1>; + }; + }; + + eth0: ethernet@e00 { + device_type = "network"; + compatible = "fsl,mpc875-fec-enet", + "fsl,pq1-fec-enet"; + reg = <0xe00 0x188>; + local-mac-address = [ 00 00 00 00 00 00 ]; + interrupts = <3 1>; + interrupt-parent = <&PIC>; + phy-handle = <&PHY0>; + linux,network-index = <0>; + }; + + eth1: ethernet@1e00 { + device_type = "network"; + compatible = "fsl,mpc875-fec-enet", + "fsl,pq1-fec-enet"; + reg = <0x1e00 0x188>; + local-mac-address = [ 00 00 00 00 00 00 ]; + interrupts = <7 1>; + interrupt-parent = <&PIC>; + phy-handle = <&PHY1>; + linux,network-index = <1>; + }; + + PIC: interrupt-controller@0 { + interrupt-controller; + #interrupt-cells = <2>; + reg = <0 0x24>; + compatible = "fsl,mpc875-pic", "fsl,pq1-pic"; + }; + + cpm@9c0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,mpc875-cpm", "fsl,cpm1", "simple-bus"; + interrupts = <0>; // cpm error interrupt + interrupt-parent = <&CPM_PIC>; + reg = <0x9c0 0x40>; + ranges; + + muram { + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x2000 0x2000>; + + data@0 { + compatible = "fsl,cpm-muram-data"; + reg = <0 0x1c00>; + }; + }; + + brg@9f0 { + compatible = "fsl,mpc875-brg", + "fsl,cpm1-brg", + "fsl,cpm-brg"; + clock-frequency = <50000000>; + reg = <0x9f0 0x10>; + }; + + CPM_PIC: interrupt-controller@930 { + interrupt-controller; + #interrupt-cells = <1>; + interrupts = <5 2 0 2>; + interrupt-parent = <&PIC>; + reg = <0x930 0x20>; + compatible = "fsl,mpc875-cpm-pic", + "fsl,cpm1-pic"; + }; + + console: serial@a80 { + device_type = "serial"; + compatible = "fsl,mpc875-smc-uart", + "fsl,cpm1-smc-uart"; + reg = <0xa80 0x10 0x3e80 0x40>; + interrupts = <4>; + interrupt-parent = <&CPM_PIC>; + fsl,cpm-brg = <1>; + fsl,cpm-command = <0x0090>; + current-speed = <115200>; + }; + }; + }; + + chosen { + linux,stdout-path = &console; + }; +}; diff --git a/arch/powerpc/boot/dts/akebono.dts b/arch/powerpc/boot/dts/akebono.dts new file mode 100644 index 000000000..f92ecfed3 --- /dev/null +++ b/arch/powerpc/boot/dts/akebono.dts @@ -0,0 +1,415 @@ +/* + * Device Tree Source for IBM Embedded PPC 476 Platform + * + * Copyright © 2013 Tony Breeds IBM Corporation + * Copyright © 2013 Alistair Popple IBM Corporation + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without + * any warranty of any kind, whether express or implied. + */ + +/dts-v1/; + +/memreserve/ 0x01f00000 0x00100000; // spin table + +/ { + #address-cells = <2>; + #size-cells = <2>; + model = "ibm,akebono"; + compatible = "ibm,akebono", "ibm,476gtr"; + dcr-parent = <&{/cpus/cpu@0}>; + + aliases { + serial0 = &UART0; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu@0 { + device_type = "cpu"; + model = "PowerPC,476"; + reg = <0>; + clock-frequency = <1600000000>; // 1.6 GHz + timebase-frequency = <100000000>; // 100Mhz + i-cache-line-size = <32>; + d-cache-line-size = <32>; + i-cache-size = <32768>; + d-cache-size = <32768>; + dcr-controller; + dcr-access-method = "native"; + status = "ok"; + }; + cpu@1 { + device_type = "cpu"; + model = "PowerPC,476"; + reg = <1>; + clock-frequency = <1600000000>; // 1.6 GHz + timebase-frequency = <100000000>; // 100Mhz + i-cache-line-size = <32>; + d-cache-line-size = <32>; + i-cache-size = <32768>; + d-cache-size = <32768>; + dcr-controller; + dcr-access-method = "native"; + status = "disabled"; + enable-method = "spin-table"; + cpu-release-addr = <0x0 0x01f00000>; + }; + }; + + memory { + device_type = "memory"; + reg = <0x0 0x0 0x0 0x0>; // filled in by zImage + }; + + MPIC: interrupt-controller { + compatible = "chrp,open-pic"; + interrupt-controller; + dcr-reg = <0xffc00000 0x00040000>; + #address-cells = <0>; + #size-cells = <0>; + #interrupt-cells = <2>; + single-cpu-affinity; + }; + + plb { + compatible = "ibm,plb6"; + #address-cells = <2>; + #size-cells = <2>; + ranges; + clock-frequency = <200000000>; // 200Mhz + + HSTA0: hsta@310000e0000 { + compatible = "ibm,476gtr-hsta-msi", "ibm,hsta-msi"; + reg = <0x310 0x000e0000 0x0 0xf0>; + interrupt-parent = <&MPIC>; + interrupts = <108 0 + 109 0 + 110 0 + 111 0 + 112 0 + 113 0 + 114 0 + 115 0 + 116 0 + 117 0 + 118 0 + 119 0 + 120 0 + 121 0 + 122 0 + 123 0>; + }; + + MAL0: mcmal { + compatible = "ibm,mcmal-476gtr", "ibm,mcmal2"; + dcr-reg = <0xc0000000 0x062>; + num-tx-chans = <1>; + num-rx-chans = <1>; + #address-cells = <0>; + #size-cells = <0>; + interrupt-parent = <&MPIC>; + interrupts = < /*TXEOB*/ 77 0x4 + /*RXEOB*/ 78 0x4 + /*SERR*/ 76 0x4 + /*TXDE*/ 79 0x4 + /*RXDE*/ 80 0x4>; + }; + + SATA0: sata@30000010000 { + compatible = "ibm,476gtr-ahci"; + reg = <0x300 0x00010000 0x0 0x10000>; + interrupt-parent = <&MPIC>; + interrupts = <93 2>; + }; + + EHCI0: ehci@30010000000 { + compatible = "ibm,476gtr-ehci", "generic-ehci"; + reg = <0x300 0x10000000 0x0 0x10000>; + interrupt-parent = <&MPIC>; + interrupts = <85 2>; + }; + + SD0: sd@30000000000 { + compatible = "ibm,476gtr-sdhci", "generic-sdhci"; + reg = <0x300 0x00000000 0x0 0x10000>; + interrupts = <91 2>; + interrupt-parent = <&MPIC>; + }; + + OHCI0: ohci@30010010000 { + compatible = "ibm,476gtr-ohci", "generic-ohci"; + reg = <0x300 0x10010000 0x0 0x10000>; + interrupt-parent = <&MPIC>; + interrupts = <89 1>; + }; + + OHCI1: ohci@30010020000 { + compatible = "ibm,476gtr-ohci", "generic-ohci"; + reg = <0x300 0x10020000 0x0 0x10000>; + interrupt-parent = <&MPIC>; + interrupts = <88 1>; + }; + + POB0: opb { + compatible = "ibm,opb-4xx", "ibm,opb"; + #address-cells = <1>; + #size-cells = <1>; + /* Wish there was a nicer way of specifying a full + * 32-bit range + */ + ranges = <0x00000000 0x0000033f 0x00000000 0x80000000 + 0x80000000 0x0000033f 0x80000000 0x80000000>; + clock-frequency = <100000000>; + + RGMII0: emac-rgmii-wol@50004 { + compatible = "ibm,rgmii-wol-476gtr", "ibm,rgmii-wol"; + reg = <0x50004 0x00000008>; + has-mdio; + }; + + EMAC0: ethernet@30000 { + device_type = "network"; + compatible = "ibm,emac-476gtr", "ibm,emac4sync"; + interrupt-parent = <&EMAC0>; + interrupts = <0x0 0x1>; + #interrupt-cells = <1>; + #address-cells = <0>; + #size-cells = <0>; + interrupt-map = </*Status*/ 0x0 &MPIC 81 0x4 + /*Wake*/ 0x1 &MPIC 82 0x4>; + reg = <0x30000 0x78>; + + /* local-mac-address will normally be added by + * the wrapper. If your device doesn't support + * passing data to the wrapper (in the form + * local-mac-addr=<hwaddr>) then you will need + * to set it manually here. */ + //local-mac-address = [000000000000]; + + mal-device = <&MAL0>; + mal-tx-channel = <0>; + mal-rx-channel = <0>; + cell-index = <0>; + max-frame-size = <9000>; + rx-fifo-size = <4096>; + tx-fifo-size = <2048>; + rx-fifo-size-gige = <16384>; + phy-mode = "rgmii"; + phy-map = <0x00000000>; + rgmii-wol-device = <&RGMII0>; + has-inverted-stacr-oc; + has-new-stacr-staopc; + }; + + UART0: serial@10000 { + device_type = "serial"; + compatible = "ns16750", "ns16550"; + reg = <0x10000 0x00000008>; + virtual-reg = <0xe8010000>; + clock-frequency = <1851851>; + current-speed = <38400>; + interrupt-parent = <&MPIC>; + interrupts = <39 2>; + }; + + IIC0: i2c@00000000 { + compatible = "ibm,iic-476gtr", "ibm,iic"; + reg = <0x0 0x00000020>; + interrupt-parent = <&MPIC>; + interrupts = <37 2>; + #address-cells = <1>; + #size-cells = <0>; + rtc@68 { + compatible = "stm,m41t80", "m41st85"; + reg = <0x68>; + }; + }; + + IIC1: i2c@00000100 { + compatible = "ibm,iic-476gtr", "ibm,iic"; + reg = <0x100 0x00000020>; + interrupt-parent = <&MPIC>; + interrupts = <38 2>; + #address-cells = <1>; + #size-cells = <0>; + avr@58 { + compatible = "ibm,akebono-avr"; + reg = <0x58>; + }; + }; + + FPGA0: fpga@ebc00000 { + compatible = "ibm,akebono-fpga"; + reg = <0xebc00000 0x8>; + }; + }; + + PCIE0: pciex@10100000000 { + device_type = "pci"; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + compatible = "ibm,plb-pciex-476fpe", "ibm,plb-pciex"; + primary; + port = <0x0>; /* port number */ + reg = <0x00000101 0x00000000 0x0 0x10000000 /* Config space access */ + 0x00000100 0x00000000 0x0 0x00001000>; /* UTL Registers space access */ + dcr-reg = <0xc0 0x20>; + +// pci_space < pci_addr > < cpu_addr > < size > + ranges = <0x02000000 0x00000000 0x80000000 0x00000110 0x80000000 0x0 0x80000000 + 0x01000000 0x0 0x0 0x00000140 0x0 0x0 0x00010000>; + + /* Inbound starting at 0x0 to 0x40000000000. In order to use MSI + * PCI devices must be able to write to the HSTA module. + */ + dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x400 0x0>; + + /* This drives busses 0 to 0xf */ + bus-range = <0x0 0xf>; + + /* Legacy interrupts (note the weird polarity, the bridge seems + * to invert PCIe legacy interrupts). + * We are de-swizzling here because the numbers are actually for + * port of the root complex virtual P2P bridge. But I want + * to avoid putting a node for it in the tree, so the numbers + * below are basically de-swizzled numbers. + * The real slot is on idsel 0, so the swizzling is 1:1 + */ + interrupt-map-mask = <0x0 0x0 0x0 0x7>; + interrupt-map = < + 0x0 0x0 0x0 0x1 &MPIC 45 0x2 /* int A */ + 0x0 0x0 0x0 0x2 &MPIC 46 0x2 /* int B */ + 0x0 0x0 0x0 0x3 &MPIC 47 0x2 /* int C */ + 0x0 0x0 0x0 0x4 &MPIC 48 0x2 /* int D */>; + }; + + PCIE1: pciex@20100000000 { + device_type = "pci"; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + compatible = "ibm,plb-pciex-476fpe", "ibm,plb-pciex"; + primary; + port = <0x1>; /* port number */ + reg = <0x00000201 0x00000000 0x0 0x10000000 /* Config space access */ + 0x00000200 0x00000000 0x0 0x00001000>; /* UTL Registers space access */ + dcr-reg = <0x100 0x20>; + +// pci_space < pci_addr > < cpu_addr > < size > + ranges = <0x02000000 0x00000000 0x80000000 0x00000210 0x80000000 0x0 0x80000000 + 0x01000000 0x0 0x0 0x00000240 0x0 0x0 0x00010000>; + + /* Inbound starting at 0x0 to 0x40000000000. In order to use MSI + * PCI devices must be able to write to the HSTA module. + */ + dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x400 0x0>; + + /* This drives busses 0 to 0xf */ + bus-range = <0x0 0xf>; + + /* Legacy interrupts (note the weird polarity, the bridge seems + * to invert PCIe legacy interrupts). + * We are de-swizzling here because the numbers are actually for + * port of the root complex virtual P2P bridge. But I want + * to avoid putting a node for it in the tree, so the numbers + * below are basically de-swizzled numbers. + * The real slot is on idsel 0, so the swizzling is 1:1 + */ + interrupt-map-mask = <0x0 0x0 0x0 0x7>; + interrupt-map = < + 0x0 0x0 0x0 0x1 &MPIC 53 0x2 /* int A */ + 0x0 0x0 0x0 0x2 &MPIC 54 0x2 /* int B */ + 0x0 0x0 0x0 0x3 &MPIC 55 0x2 /* int C */ + 0x0 0x0 0x0 0x4 &MPIC 56 0x2 /* int D */>; + }; + + PCIE2: pciex@18100000000 { + device_type = "pci"; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + compatible = "ibm,plb-pciex-476fpe", "ibm,plb-pciex"; + primary; + port = <0x2>; /* port number */ + reg = <0x00000181 0x00000000 0x0 0x10000000 /* Config space access */ + 0x00000180 0x00000000 0x0 0x00001000>; /* UTL Registers space access */ + dcr-reg = <0xe0 0x20>; + +// pci_space < pci_addr > < cpu_addr > < size > + ranges = <0x02000000 0x00000000 0x80000000 0x00000190 0x80000000 0x0 0x80000000 + 0x01000000 0x0 0x0 0x000001c0 0x0 0x0 0x00010000>; + + /* Inbound starting at 0x0 to 0x40000000000. In order to use MSI + * PCI devices must be able to write to the HSTA module. + */ + dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x400 0x0>; + + /* This drives busses 0 to 0xf */ + bus-range = <0x0 0xf>; + + /* Legacy interrupts (note the weird polarity, the bridge seems + * to invert PCIe legacy interrupts). + * We are de-swizzling here because the numbers are actually for + * port of the root complex virtual P2P bridge. But I want + * to avoid putting a node for it in the tree, so the numbers + * below are basically de-swizzled numbers. + * The real slot is on idsel 0, so the swizzling is 1:1 + */ + interrupt-map-mask = <0x0 0x0 0x0 0x7>; + interrupt-map = < + 0x0 0x0 0x0 0x1 &MPIC 61 0x2 /* int A */ + 0x0 0x0 0x0 0x2 &MPIC 62 0x2 /* int B */ + 0x0 0x0 0x0 0x3 &MPIC 63 0x2 /* int C */ + 0x0 0x0 0x0 0x4 &MPIC 64 0x2 /* int D */>; + }; + + PCIE3: pciex@28100000000 { + device_type = "pci"; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + compatible = "ibm,plb-pciex-476fpe", "ibm,plb-pciex"; + primary; + port = <0x3>; /* port number */ + reg = <0x00000281 0x00000000 0x0 0x10000000 /* Config space access */ + 0x00000280 0x00000000 0x0 0x00001000>; /* UTL Registers space access */ + dcr-reg = <0x120 0x20>; + +// pci_space < pci_addr > < cpu_addr > < size > + ranges = <0x02000000 0x00000000 0x80000000 0x00000290 0x80000000 0x0 0x80000000 + 0x01000000 0x0 0x0 0x000002c0 0x0 0x0 0x00010000>; + + /* Inbound starting at 0x0 to 0x40000000000. In order to use MSI + * PCI devices must be able to write to the HSTA module. + */ + dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x400 0x0>; + + /* This drives busses 0 to 0xf */ + bus-range = <0x0 0xf>; + + /* Legacy interrupts (note the weird polarity, the bridge seems + * to invert PCIe legacy interrupts). + * We are de-swizzling here because the numbers are actually for + * port of the root complex virtual P2P bridge. But I want + * to avoid putting a node for it in the tree, so the numbers + * below are basically de-swizzled numbers. + * The real slot is on idsel 0, so the swizzling is 1:1 + */ + interrupt-map-mask = <0x0 0x0 0x0 0x7>; + interrupt-map = < + 0x0 0x0 0x0 0x1 &MPIC 69 0x2 /* int A */ + 0x0 0x0 0x0 0x2 &MPIC 70 0x2 /* int B */ + 0x0 0x0 0x0 0x3 &MPIC 71 0x2 /* int C */ + 0x0 0x0 0x0 0x4 &MPIC 72 0x2 /* int D */>; + }; + }; + + chosen { + linux,stdout-path = &UART0; + }; +}; diff --git a/arch/powerpc/boot/dts/amigaone.dts b/arch/powerpc/boot/dts/amigaone.dts new file mode 100644 index 000000000..49ac36b16 --- /dev/null +++ b/arch/powerpc/boot/dts/amigaone.dts @@ -0,0 +1,173 @@ +/* + * AmigaOne Device Tree Source + * + * Copyright 2008 Gerhard Pircher (gerhard_pircher@gmx.net) + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +/dts-v1/; + +/ { + model = "AmigaOne"; + compatible = "eyetech,amigaone"; + coherency-off; + #address-cells = <1>; + #size-cells = <1>; + + cpus { + #cpus = <1>; + #address-cells = <1>; + #size-cells = <0>; + + cpu@0 { + device_type = "cpu"; + reg = <0>; + d-cache-line-size = <32>; // 32 bytes + i-cache-line-size = <32>; // 32 bytes + d-cache-size = <32768>; // L1, 32K + i-cache-size = <32768>; // L1, 32K + timebase-frequency = <0>; // 33.3 MHz, from U-boot + clock-frequency = <0>; // From U-boot + bus-frequency = <0>; // From U-boot + }; + }; + + memory { + device_type = "memory"; + reg = <0 0>; // From U-boot + }; + + pci@80000000 { + device_type = "pci"; + compatible = "mai-logic,articia-s"; + bus-frequency = <33333333>; + bus-range = <0 0xff>; + ranges = <0x01000000 0 0x00000000 0xfe000000 0 0x00c00000 // PCI I/O + 0x02000000 0 0x80000000 0x80000000 0 0x7d000000 // PCI memory + 0x02000000 0 0x00000000 0xfd000000 0 0x01000000>; // PCI alias memory (ISA) + // Configuration address and data register. + reg = <0xfec00cf8 4 + 0xfee00cfc 4>; + 8259-interrupt-acknowledge = <0xfef00000>; + // Do not define a interrupt-parent here, if there is no + // interrupt-map property. + #address-cells = <3>; + #size-cells = <2>; + + isa@7 { + device_type = "isa"; + compatible = "pciclass,0601"; + vendor-id = <0x00001106>; + device-id = <0x00000686>; + revision-id = <0x00000010>; + class-code = <0x00060100>; + subsystem-id = <0>; + subsystem-vendor-id = <0>; + devsel-speed = <0x00000001>; + min-grant = <0>; + max-latency = <0>; + /* First 4k for I/O at 0x0 on PCI mapped to 0x0 on ISA. */ + ranges = <0x00000001 0 0x01000000 0 0x00000000 0x00001000>; + interrupt-parent = <&i8259>; + #interrupt-cells = <2>; + #address-cells = <2>; + #size-cells = <1>; + + dma-controller@0 { + compatible = "pnpPNP,200"; + reg = <1 0x00000000 0x00000020 + 1 0x00000080 0x00000010 + 1 0x000000c0 0x00000020>; + }; + + i8259: interrupt-controller@20 { + device_type = "interrupt-controller"; + compatible = "pnpPNP,000"; + interrupt-controller; + reg = <1 0x00000020 0x00000002 + 1 0x000000a0 0x00000002 + 1 0x000004d0 0x00000002>; + reserved-interrupts = <2>; + #interrupt-cells = <2>; + }; + + timer@40 { + // Also adds pcspkr to platform devices. + compatible = "pnpPNP,100"; + reg = <1 0x00000040 0x00000020>; + }; + + 8042@60 { + device_type = "8042"; + reg = <1 0x00000060 0x00000001 + 1 0x00000064 0x00000001>; + interrupts = <1 3 12 3>; + #address-cells = <1>; + #size-cells = <0>; + + keyboard@0 { + compatible = "pnpPNP,303"; + reg = <0>; + }; + + mouse@1 { + compatible = "pnpPNP,f03"; + reg = <1>; + }; + }; + + rtc@70 { + compatible = "pnpPNP,b00"; + reg = <1 0x00000070 0x00000002>; + interrupts = <8 3>; + }; + + serial@3f8 { + device_type = "serial"; + compatible = "pnpPNP,501","pnpPNP,500"; + reg = <1 0x000003f8 0x00000008>; + interrupts = <4 3>; + clock-frequency = <1843200>; + current-speed = <115200>; + }; + + serial@2f8 { + device_type = "serial"; + compatible = "pnpPNP,501","pnpPNP,500"; + reg = <1 0x000002f8 0x00000008>; + interrupts = <3 3>; + clock-frequency = <1843200>; + current-speed = <115200>; + }; + + parallel@378 { + device_type = "parallel"; + // No ECP support for now, otherwise add "pnpPNP,401". + compatible = "pnpPNP,400"; + reg = <1 0x00000378 0x00000003 + 1 0x00000778 0x00000003>; + }; + + fdc@3f0 { + device_type = "fdc"; + compatible = "pnpPNP,700"; + reg = <1 0x000003f0 0x00000008>; + interrupts = <6 3>; + #address-cells = <1>; + #size-cells = <0>; + + disk@0 { + reg = <0>; + }; + }; + }; + }; + + chosen { + linux,stdout-path = "/pci@80000000/isa@7/serial@3f8"; + }; +}; diff --git a/arch/powerpc/boot/dts/arches.dts b/arch/powerpc/boot/dts/arches.dts new file mode 100644 index 000000000..30f41204a --- /dev/null +++ b/arch/powerpc/boot/dts/arches.dts @@ -0,0 +1,355 @@ +/* + * Device Tree Source for AMCC Arches (dual 460GT board) + * + * (C) Copyright 2008 Applied Micro Circuits Corporation + * Victor Gallardo <vgallardo@amcc.com> + * Adam Graham <agraham@amcc.com> + * + * Based on the glacier.dts file + * Stefan Roese <sr@denx.de> + * Copyright 2008 DENX Software Engineering + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +/dts-v1/; + +/ { + #address-cells = <2>; + #size-cells = <1>; + model = "amcc,arches"; + compatible = "amcc,arches"; + dcr-parent = <&{/cpus/cpu@0}>; + + aliases { + ethernet0 = &EMAC0; + ethernet1 = &EMAC1; + ethernet2 = &EMAC2; + serial0 = &UART0; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu@0 { + device_type = "cpu"; + model = "PowerPC,460GT"; + reg = <0x00000000>; + clock-frequency = <0>; /* Filled in by U-Boot */ + timebase-frequency = <0>; /* Filled in by U-Boot */ + i-cache-line-size = <32>; + d-cache-line-size = <32>; + i-cache-size = <32768>; + d-cache-size = <32768>; + dcr-controller; + dcr-access-method = "native"; + next-level-cache = <&L2C0>; + }; + }; + + memory { + device_type = "memory"; + reg = <0x00000000 0x00000000 0x00000000>; /* Filled in by U-Boot */ + }; + + UIC0: interrupt-controller0 { + compatible = "ibm,uic-460gt","ibm,uic"; + interrupt-controller; + cell-index = <0>; + dcr-reg = <0x0c0 0x009>; + #address-cells = <0>; + #size-cells = <0>; + #interrupt-cells = <2>; + }; + + UIC1: interrupt-controller1 { + compatible = "ibm,uic-460gt","ibm,uic"; + interrupt-controller; + cell-index = <1>; + dcr-reg = <0x0d0 0x009>; + #address-cells = <0>; + #size-cells = <0>; + #interrupt-cells = <2>; + interrupts = <0x1e 0x4 0x1f 0x4>; /* cascade */ + interrupt-parent = <&UIC0>; + }; + + UIC2: interrupt-controller2 { + compatible = "ibm,uic-460gt","ibm,uic"; + interrupt-controller; + cell-index = <2>; + dcr-reg = <0x0e0 0x009>; + #address-cells = <0>; + #size-cells = <0>; + #interrupt-cells = <2>; + interrupts = <0xa 0x4 0xb 0x4>; /* cascade */ + interrupt-parent = <&UIC0>; + }; + + UIC3: interrupt-controller3 { + compatible = "ibm,uic-460gt","ibm,uic"; + interrupt-controller; + cell-index = <3>; + dcr-reg = <0x0f0 0x009>; + #address-cells = <0>; + #size-cells = <0>; + #interrupt-cells = <2>; + interrupts = <0x10 0x4 0x11 0x4>; /* cascade */ + interrupt-parent = <&UIC0>; + }; + + SDR0: sdr { + compatible = "ibm,sdr-460gt"; + dcr-reg = <0x00e 0x002>; + }; + + CPR0: cpr { + compatible = "ibm,cpr-460gt"; + dcr-reg = <0x00c 0x002>; + }; + + L2C0: l2c { + compatible = "ibm,l2-cache-460gt", "ibm,l2-cache"; + dcr-reg = <0x020 0x008 /* Internal SRAM DCR's */ + 0x030 0x008>; /* L2 cache DCR's */ + cache-line-size = <32>; /* 32 bytes */ + cache-size = <262144>; /* L2, 256K */ + interrupt-parent = <&UIC1>; + interrupts = <11 1>; + }; + + plb { + compatible = "ibm,plb-460gt", "ibm,plb4"; + #address-cells = <2>; + #size-cells = <1>; + ranges; + clock-frequency = <0>; /* Filled in by U-Boot */ + + SDRAM0: sdram { + compatible = "ibm,sdram-460gt", "ibm,sdram-405gp"; + dcr-reg = <0x010 0x002>; + }; + + CRYPTO: crypto@180000 { + compatible = "amcc,ppc460gt-crypto", "amcc,ppc4xx-crypto"; + reg = <4 0x00180000 0x80400>; + interrupt-parent = <&UIC0>; + interrupts = <0x1d 0x4>; + }; + + MAL0: mcmal { + compatible = "ibm,mcmal-460gt", "ibm,mcmal2"; + dcr-reg = <0x180 0x062>; + num-tx-chans = <3>; + num-rx-chans = <24>; + #address-cells = <0>; + #size-cells = <0>; + interrupt-parent = <&UIC2>; + interrupts = < /*TXEOB*/ 0x6 0x4 + /*RXEOB*/ 0x7 0x4 + /*SERR*/ 0x3 0x4 + /*TXDE*/ 0x4 0x4 + /*RXDE*/ 0x5 0x4>; + desc-base-addr-high = <0x8>; + }; + + POB0: opb { + compatible = "ibm,opb-460gt", "ibm,opb"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0xb0000000 0x00000004 0xb0000000 0x50000000>; + clock-frequency = <0>; /* Filled in by U-Boot */ + + EBC0: ebc { + compatible = "ibm,ebc-460gt", "ibm,ebc"; + dcr-reg = <0x012 0x002>; + #address-cells = <2>; + #size-cells = <1>; + clock-frequency = <0>; /* Filled in by U-Boot */ + /* ranges property is supplied by U-Boot */ + interrupts = <0x6 0x4>; + interrupt-parent = <&UIC1>; + + nor_flash@0,0 { + compatible = "amd,s29gl256n", "cfi-flash"; + bank-width = <2>; + reg = <0x00000000 0x00000000 0x02000000>; + #address-cells = <1>; + #size-cells = <1>; + partition@0 { + label = "kernel"; + reg = <0x00000000 0x001e0000>; + }; + partition@1e0000 { + label = "dtb"; + reg = <0x001e0000 0x00020000>; + }; + partition@200000 { + label = "root"; + reg = <0x00200000 0x00200000>; + }; + partition@400000 { + label = "user"; + reg = <0x00400000 0x01b60000>; + }; + partition@1f60000 { + label = "env"; + reg = <0x01f60000 0x00040000>; + }; + partition@1fa0000 { + label = "u-boot"; + reg = <0x01fa0000 0x00060000>; + }; + }; + }; + + UART0: serial@ef600300 { + device_type = "serial"; + compatible = "ns16550"; + reg = <0xef600300 0x00000008>; + virtual-reg = <0xef600300>; + clock-frequency = <0>; /* Filled in by U-Boot */ + current-speed = <0>; /* Filled in by U-Boot */ + interrupt-parent = <&UIC1>; + interrupts = <0x1 0x4>; + }; + + IIC0: i2c@ef600700 { + compatible = "ibm,iic-460gt", "ibm,iic"; + reg = <0xef600700 0x00000014>; + interrupt-parent = <&UIC0>; + interrupts = <0x2 0x4>; + #address-cells = <1>; + #size-cells = <0>; + sttm@4a { + compatible = "ad,ad7414"; + reg = <0x4a>; + interrupt-parent = <&UIC1>; + interrupts = <0x0 0x8>; + }; + }; + + IIC1: i2c@ef600800 { + compatible = "ibm,iic-460gt", "ibm,iic"; + reg = <0xef600800 0x00000014>; + interrupt-parent = <&UIC0>; + interrupts = <0x3 0x4>; + }; + + TAH0: emac-tah@ef601350 { + compatible = "ibm,tah-460gt", "ibm,tah"; + reg = <0xef601350 0x00000030>; + }; + + TAH1: emac-tah@ef601450 { + compatible = "ibm,tah-460gt", "ibm,tah"; + reg = <0xef601450 0x00000030>; + }; + + EMAC0: ethernet@ef600e00 { + device_type = "network"; + compatible = "ibm,emac-460gt", "ibm,emac4sync"; + interrupt-parent = <&EMAC0>; + interrupts = <0x0 0x1>; + #interrupt-cells = <1>; + #address-cells = <0>; + #size-cells = <0>; + interrupt-map = </*Status*/ 0x0 &UIC2 0x10 0x4 + /*Wake*/ 0x1 &UIC2 0x14 0x4>; + reg = <0xef600e00 0x000000c4>; + local-mac-address = [000000000000]; /* Filled in by U-Boot */ + mal-device = <&MAL0>; + mal-tx-channel = <0>; + mal-rx-channel = <0>; + cell-index = <0>; + max-frame-size = <9000>; + rx-fifo-size = <4096>; + tx-fifo-size = <2048>; + rx-fifo-size-gige = <16384>; + phy-mode = "sgmii"; + phy-map = <0xffffffff>; + gpcs-address = <0x0000000a>; + tah-device = <&TAH0>; + tah-channel = <0>; + has-inverted-stacr-oc; + has-new-stacr-staopc; + }; + + EMAC1: ethernet@ef600f00 { + device_type = "network"; + compatible = "ibm,emac-460gt", "ibm,emac4sync"; + interrupt-parent = <&EMAC1>; + interrupts = <0x0 0x1>; + #interrupt-cells = <1>; + #address-cells = <0>; + #size-cells = <0>; + interrupt-map = </*Status*/ 0x0 &UIC2 0x11 0x4 + /*Wake*/ 0x1 &UIC2 0x15 0x4>; + reg = <0xef600f00 0x000000c4>; + local-mac-address = [000000000000]; /* Filled in by U-Boot */ + mal-device = <&MAL0>; + mal-tx-channel = <1>; + mal-rx-channel = <8>; + cell-index = <1>; + max-frame-size = <9000>; + rx-fifo-size = <4096>; + tx-fifo-size = <2048>; + rx-fifo-size-gige = <16384>; + phy-mode = "sgmii"; + phy-map = <0x00000000>; + gpcs-address = <0x0000000b>; + tah-device = <&TAH1>; + tah-channel = <1>; + has-inverted-stacr-oc; + has-new-stacr-staopc; + mdio-device = <&EMAC0>; + }; + + EMAC2: ethernet@ef601100 { + device_type = "network"; + compatible = "ibm,emac-460gt", "ibm,emac4sync"; + interrupt-parent = <&EMAC2>; + interrupts = <0x0 0x1>; + #interrupt-cells = <1>; + #address-cells = <0>; + #size-cells = <0>; + interrupt-map = </*Status*/ 0x0 &UIC2 0x12 0x4 + /*Wake*/ 0x1 &UIC2 0x16 0x4>; + reg = <0xef601100 0x000000c4>; + local-mac-address = [000000000000]; /* Filled in by U-Boot */ + mal-device = <&MAL0>; + mal-tx-channel = <2>; + mal-rx-channel = <16>; + cell-index = <2>; + max-frame-size = <9000>; + rx-fifo-size = <4096>; + tx-fifo-size = <2048>; + rx-fifo-size-gige = <16384>; + tx-fifo-size-gige = <16384>; /* emac2&3 only */ + phy-mode = "sgmii"; + phy-map = <0x00000001>; + gpcs-address = <0x0000000C>; + has-inverted-stacr-oc; + has-new-stacr-staopc; + mdio-device = <&EMAC0>; + }; + }; + }; +}; diff --git a/arch/powerpc/boot/dts/asp834x-redboot.dts b/arch/powerpc/boot/dts/asp834x-redboot.dts new file mode 100644 index 000000000..9198745f4 --- /dev/null +++ b/arch/powerpc/boot/dts/asp834x-redboot.dts @@ -0,0 +1,310 @@ +/* + * Analogue & Micro ASP8347 Device Tree Source + * + * Copyright 2008 Codehermit + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +/dts-v1/; + +/ { + model = "Analogue & Micro ASP8347E"; + compatible = "analogue-and-micro,asp8347e"; + #address-cells = <1>; + #size-cells = <1>; + + aliases { + ethernet0 = &enet0; + ethernet1 = &enet1; + serial0 = &serial0; + serial1 = &serial1; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + PowerPC,8347@0 { + device_type = "cpu"; + reg = <0x0>; + d-cache-line-size = <32>; + i-cache-line-size = <32>; + d-cache-size = <32768>; + i-cache-size = <32768>; + timebase-frequency = <0>; // from bootloader + bus-frequency = <0>; // from bootloader + clock-frequency = <0>; // from bootloader + }; + }; + + memory { + device_type = "memory"; + reg = <0x00000000 0x8000000>; // 128MB at 0 + }; + + localbus@ff005000 { + #address-cells = <2>; + #size-cells = <1>; + compatible = "fsl,mpc8347e-localbus", + "fsl,pq2pro-localbus", + "simple-bus"; + reg = <0xff005000 0x1000>; + interrupts = <77 0x8>; + interrupt-parent = <&ipic>; + + ranges = < + 0 0 0xf0000000 0x02000000 + >; + + flash@0,0 { + compatible = "cfi-flash"; + reg = <0 0 0x02000000>; + bank-width = <2>; + device-width = <2>; + }; + }; + + soc8349@ff000000 { + #address-cells = <1>; + #size-cells = <1>; + device_type = "soc"; + ranges = <0x0 0xff000000 0x00100000>; + reg = <0xff000000 0x00000200>; + bus-frequency = <0>; + + wdt@200 { + device_type = "watchdog"; + compatible = "mpc83xx_wdt"; + reg = <0x200 0x100>; + }; + + i2c@3000 { + #address-cells = <1>; + #size-cells = <0>; + cell-index = <0>; + compatible = "fsl-i2c"; + reg = <0x3000 0x100>; + interrupts = <14 0x8>; + interrupt-parent = <&ipic>; + dfsrr; + + rtc@68 { + compatible = "dallas,ds1374"; + reg = <0x68>; + }; + }; + + i2c@3100 { + #address-cells = <1>; + #size-cells = <0>; + cell-index = <1>; + compatible = "fsl-i2c"; + reg = <0x3100 0x100>; + interrupts = <15 0x8>; + interrupt-parent = <&ipic>; + dfsrr; + }; + + spi@7000 { + cell-index = <0>; + compatible = "fsl,spi"; + reg = <0x7000 0x1000>; + interrupts = <16 0x8>; + interrupt-parent = <&ipic>; + mode = "cpu"; + }; + + dma@82a8 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,mpc8347-dma", "fsl,elo-dma"; + reg = <0x82a8 4>; + ranges = <0 0x8100 0x1a8>; + interrupt-parent = <&ipic>; + interrupts = <71 8>; + cell-index = <0>; + dma-channel@0 { + compatible = "fsl,mpc8347-dma-channel", "fsl,elo-dma-channel"; + reg = <0 0x80>; + cell-index = <0>; + interrupt-parent = <&ipic>; + interrupts = <71 8>; + }; + dma-channel@80 { + compatible = "fsl,mpc8347-dma-channel", "fsl,elo-dma-channel"; + reg = <0x80 0x80>; + cell-index = <1>; + interrupt-parent = <&ipic>; + interrupts = <71 8>; + }; + dma-channel@100 { + compatible = "fsl,mpc8347-dma-channel", "fsl,elo-dma-channel"; + reg = <0x100 0x80>; + cell-index = <2>; + interrupt-parent = <&ipic>; + interrupts = <71 8>; + }; + dma-channel@180 { + compatible = "fsl,mpc8347-dma-channel", "fsl,elo-dma-channel"; + reg = <0x180 0x28>; + cell-index = <3>; + interrupt-parent = <&ipic>; + interrupts = <71 8>; + }; + }; + + /* phy type (ULPI or SERIAL) are only types supported for MPH */ + /* port = 0 or 1 */ + usb@22000 { + compatible = "fsl-usb2-mph"; + reg = <0x22000 0x1000>; + #address-cells = <1>; + #size-cells = <0>; + interrupt-parent = <&ipic>; + interrupts = <39 0x8>; + phy_type = "ulpi"; + port0; + }; + /* phy type (ULPI, UTMI, UTMI_WIDE, SERIAL) */ + usb@23000 { + compatible = "fsl-usb2-dr"; + reg = <0x23000 0x1000>; + #address-cells = <1>; + #size-cells = <0>; + interrupt-parent = <&ipic>; + interrupts = <38 0x8>; + dr_mode = "otg"; + phy_type = "ulpi"; + }; + + enet0: ethernet@24000 { + #address-cells = <1>; + #size-cells = <1>; + cell-index = <0>; + device_type = "network"; + model = "TSEC"; + compatible = "gianfar"; + reg = <0x24000 0x1000>; + ranges = <0x0 0x24000 0x1000>; + local-mac-address = [ 00 08 e5 11 32 33 ]; + interrupts = <32 0x8 33 0x8 34 0x8>; + interrupt-parent = <&ipic>; + tbi-handle = <&tbi0>; + phy-handle = <&phy0>; + linux,network-index = <0>; + + mdio@520 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,gianfar-mdio"; + reg = <0x520 0x20>; + + phy0: ethernet-phy@0 { + interrupt-parent = <&ipic>; + interrupts = <17 0x8>; + reg = <0x1>; + }; + + phy1: ethernet-phy@1 { + interrupt-parent = <&ipic>; + interrupts = <18 0x8>; + reg = <0x2>; + }; + + tbi0: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + }; + + enet1: ethernet@25000 { + #address-cells = <1>; + #size-cells = <1>; + cell-index = <1>; + device_type = "network"; + model = "TSEC"; + compatible = "gianfar"; + reg = <0x25000 0x1000>; + ranges = <0x0 0x25000 0x1000>; + local-mac-address = [ 00 08 e5 11 32 34 ]; + interrupts = <35 0x8 36 0x8 37 0x8>; + interrupt-parent = <&ipic>; + tbi-handle = <&tbi1>; + phy-handle = <&phy1>; + linux,network-index = <1>; + + mdio@520 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,gianfar-tbi"; + reg = <0x520 0x20>; + + tbi1: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + }; + + serial0: serial@4500 { + cell-index = <0>; + device_type = "serial"; + compatible = "fsl,ns16550", "ns16550"; + reg = <0x4500 0x100>; + clock-frequency = <400000000>; + interrupts = <9 0x8>; + interrupt-parent = <&ipic>; + }; + + serial1: serial@4600 { + cell-index = <1>; + device_type = "serial"; + compatible = "fsl,ns16550", "ns16550"; + reg = <0x4600 0x100>; + clock-frequency = <400000000>; + interrupts = <10 0x8>; + interrupt-parent = <&ipic>; + }; + + /* May need to remove if on a part without crypto engine */ + crypto@30000 { + device_type = "crypto"; + model = "SEC2"; + compatible = "talitos"; + reg = <0x30000 0x10000>; + interrupts = <11 0x8>; + interrupt-parent = <&ipic>; + num-channels = <4>; + channel-fifo-len = <24>; + exec-units-mask = <0x0000007e>; + /* desc mask is for rev2.0, + * we need runtime fixup for >2.0 */ + descriptor-types-mask = <0x01010ebf>; + }; + + /* IPIC + * interrupts cell = <intr #, sense> + * sense values match linux IORESOURCE_IRQ_* defines: + * sense == 8: Level, low assertion + * sense == 2: Edge, high-to-low change + */ + ipic: pic@700 { + interrupt-controller; + #address-cells = <0>; + #interrupt-cells = <2>; + reg = <0x700 0x100>; + device_type = "ipic"; + }; + }; + + chosen { + bootargs = "console=ttyS0,38400 root=/dev/mtdblock3 rootfstype=jffs2"; + linux,stdout-path = &serial0; + }; + +}; diff --git a/arch/powerpc/boot/dts/b4420qds.dts b/arch/powerpc/boot/dts/b4420qds.dts new file mode 100644 index 000000000..508dbdf33 --- /dev/null +++ b/arch/powerpc/boot/dts/b4420qds.dts @@ -0,0 +1,50 @@ +/* + * B4420DS Device Tree Source + * + * Copyright 2012 Freescale Semiconductor, Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * This software is provided by Freescale Semiconductor "as is" and any + * express or implied warranties, including, but not limited to, the implied + * warranties of merchantability and fitness for a particular purpose are + * disclaimed. In no event shall Freescale Semiconductor be liable for any + * direct, indirect, incidental, special, exemplary, or consequential damages + * (including, but not limited to, procurement of substitute goods or services; + * loss of use, data, or profits; or business interruption) however caused and + * on any theory of liability, whether in contract, strict liability, or tort + * (including negligence or otherwise) arising in any way out of the use of + * this software, even if advised of the possibility of such damage. + */ + +/include/ "fsl/b4420si-pre.dtsi" +/include/ "b4qds.dtsi" + +/ { + model = "fsl,B4420QDS"; + compatible = "fsl,B4420QDS"; + + ifc: localbus@ffe124000 { + board-control@3,0 { + compatible = "fsl,b4420qds-fpga", "fsl,fpga-qixis"; + }; + }; + +}; + +/include/ "fsl/b4420si-post.dtsi" diff --git a/arch/powerpc/boot/dts/b4860qds.dts b/arch/powerpc/boot/dts/b4860qds.dts new file mode 100644 index 000000000..6bb3707ff --- /dev/null +++ b/arch/powerpc/boot/dts/b4860qds.dts @@ -0,0 +1,61 @@ +/* + * B4860DS Device Tree Source + * + * Copyright 2012 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +/include/ "fsl/b4860si-pre.dtsi" +/include/ "b4qds.dtsi" + +/ { + model = "fsl,B4860QDS"; + compatible = "fsl,B4860QDS"; + + ifc: localbus@ffe124000 { + board-control@3,0 { + compatible = "fsl,b4860qds-fpga", "fsl,fpga-qixis"; + }; + }; + + rio: rapidio@ffe0c0000 { + reg = <0xf 0xfe0c0000 0 0x11000>; + + port1 { + ranges = <0 0 0xc 0x20000000 0 0x10000000>; + }; + port2 { + ranges = <0 0 0xc 0x30000000 0 0x10000000>; + }; + }; + +}; + +/include/ "fsl/b4860si-post.dtsi" diff --git a/arch/powerpc/boot/dts/b4qds.dtsi b/arch/powerpc/boot/dts/b4qds.dtsi new file mode 100644 index 000000000..24ed80dc2 --- /dev/null +++ b/arch/powerpc/boot/dts/b4qds.dtsi @@ -0,0 +1,220 @@ +/* + * B4420DS Device Tree Source + * + * Copyright 2012 - 2014 Freescale Semiconductor, Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * This software is provided by Freescale Semiconductor "as is" and any + * express or implied warranties, including, but not limited to, the implied + * warranties of merchantability and fitness for a particular purpose are + * disclaimed. In no event shall Freescale Semiconductor be liable for any + * direct, indirect, incidental, special, exemplary, or consequential damages + * (including, but not limited to, procurement of substitute goods or services; + * loss of use, data, or profits; or business interruption) however caused and + * on any theory of liability, whether in contract, strict liability, or tort + * (including negligence or otherwise) arising in any way out of the use of + * this software, even if advised of the possibility of such damage. + */ + +/ { + model = "fsl,B4QDS"; + compatible = "fsl,B4QDS"; + #address-cells = <2>; + #size-cells = <2>; + interrupt-parent = <&mpic>; + + ifc: localbus@ffe124000 { + reg = <0xf 0xfe124000 0 0x2000>; + ranges = <0 0 0xf 0xe8000000 0x08000000 + 2 0 0xf 0xff800000 0x00010000 + 3 0 0xf 0xffdf0000 0x00008000>; + + nor@0,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "cfi-flash"; + reg = <0x0 0x0 0x8000000>; + bank-width = <2>; + device-width = <1>; + }; + + nand@2,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,ifc-nand"; + reg = <0x2 0x0 0x10000>; + + partition@0 { + /* This location must not be altered */ + /* 1MB for u-boot Bootloader Image */ + reg = <0x0 0x00100000>; + label = "NAND U-Boot Image"; + read-only; + }; + + partition@100000 { + /* 1MB for DTB Image */ + reg = <0x00100000 0x00100000>; + label = "NAND DTB Image"; + }; + + partition@200000 { + /* 10MB for Linux Kernel Image */ + reg = <0x00200000 0x00A00000>; + label = "NAND Linux Kernel Image"; + }; + + partition@c00000 { + /* 500MB for Root file System Image */ + reg = <0x00c00000 0x1F400000>; + label = "NAND RFS Image"; + }; + }; + + board-control@3,0 { + compatible = "fsl,b4qds-fpga", "fsl,fpga-qixis"; + reg = <3 0 0x300>; + }; + }; + + memory { + device_type = "memory"; + }; + + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + bman_fbpr: bman-fbpr { + size = <0 0x1000000>; + alignment = <0 0x1000000>; + }; + }; + + dcsr: dcsr@f00000000 { + ranges = <0x00000000 0xf 0x00000000 0x01052000>; + }; + + bportals: bman-portals@ff4000000 { + ranges = <0x0 0xf 0xf4000000 0x2000000>; + }; + + soc: soc@ffe000000 { + ranges = <0x00000000 0xf 0xfe000000 0x1000000>; + reg = <0xf 0xfe000000 0 0x00001000>; + spi@110000 { + flash@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "sst,sst25wf040"; + reg = <0>; + spi-max-frequency = <40000000>; /* input clock */ + }; + }; + + sdhc@114000 { + /*Disabled as there is no sdhc connector on B4420QDS board*/ + status = "disabled"; + }; + + i2c@118000 { + mux@77 { + compatible = "nxp,pca9547"; + reg = <0x77>; + #address-cells = <1>; + #size-cells = <0>; + + i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + + eeprom@50 { + compatible = "at24,24c64"; + reg = <0x50>; + }; + eeprom@51 { + compatible = "at24,24c256"; + reg = <0x51>; + }; + eeprom@53 { + compatible = "at24,24c256"; + reg = <0x53>; + }; + eeprom@57 { + compatible = "at24,24c256"; + reg = <0x57>; + }; + rtc@68 { + compatible = "dallas,ds3232"; + reg = <0x68>; + }; + }; + + i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x2>; + + ina220@40 { + compatible = "ti,ina220"; + reg = <0x40>; + shunt-resistor = <1000>; + }; + }; + + i2c@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x3>; + + adt7461@4c { + compatible = "adi,adt7461"; + reg = <0x4c>; + }; + }; + }; + }; + + usb@210000 { + dr_mode = "host"; + phy_type = "ulpi"; + }; + + }; + + pci0: pcie@ffe200000 { + reg = <0xf 0xfe200000 0 0x10000>; + ranges = <0x02000000 0 0xe0000000 0xc 0x00000000 0x0 0x20000000 + 0x01000000 0 0x00000000 0xf 0xf8000000 0x0 0x00010000>; + pcie@0 { + ranges = <0x02000000 0 0xe0000000 + 0x02000000 0 0xe0000000 + 0 0x20000000 + + 0x01000000 0 0x00000000 + 0x01000000 0 0x00000000 + 0 0x00010000>; + }; + }; + +}; + +/include/ "fsl/b4si-post.dtsi" diff --git a/arch/powerpc/boot/dts/bamboo.dts b/arch/powerpc/boot/dts/bamboo.dts new file mode 100644 index 000000000..aa68911f6 --- /dev/null +++ b/arch/powerpc/boot/dts/bamboo.dts @@ -0,0 +1,300 @@ +/* + * Device Tree Source for AMCC Bamboo + * + * Copyright (c) 2006, 2007 IBM Corp. + * Josh Boyer <jwboyer@linux.vnet.ibm.com> + * + * FIXME: Draft only! + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without + * any warranty of any kind, whether express or implied. + */ + +/dts-v1/; + +/ { + #address-cells = <2>; + #size-cells = <1>; + model = "amcc,bamboo"; + compatible = "amcc,bamboo"; + dcr-parent = <&{/cpus/cpu@0}>; + + aliases { + ethernet0 = &EMAC0; + ethernet1 = &EMAC1; + serial0 = &UART0; + serial1 = &UART1; + serial2 = &UART2; + serial3 = &UART3; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu@0 { + device_type = "cpu"; + model = "PowerPC,440EP"; + reg = <0x00000000>; + clock-frequency = <0>; /* Filled in by zImage */ + timebase-frequency = <0>; /* Filled in by zImage */ + i-cache-line-size = <32>; + d-cache-line-size = <32>; + i-cache-size = <32768>; + d-cache-size = <32768>; + dcr-controller; + dcr-access-method = "native"; + }; + }; + + memory { + device_type = "memory"; + reg = <0x00000000 0x00000000 0x00000000>; /* Filled in by zImage */ + }; + + UIC0: interrupt-controller0 { + compatible = "ibm,uic-440ep","ibm,uic"; + interrupt-controller; + cell-index = <0>; + dcr-reg = <0x0c0 0x009>; + #address-cells = <0>; + #size-cells = <0>; + #interrupt-cells = <2>; + }; + + UIC1: interrupt-controller1 { + compatible = "ibm,uic-440ep","ibm,uic"; + interrupt-controller; + cell-index = <1>; + dcr-reg = <0x0d0 0x009>; + #address-cells = <0>; + #size-cells = <0>; + #interrupt-cells = <2>; + interrupts = <0x1e 0x4 0x1f 0x4>; /* cascade */ + interrupt-parent = <&UIC0>; + }; + + SDR0: sdr { + compatible = "ibm,sdr-440ep"; + dcr-reg = <0x00e 0x002>; + }; + + CPR0: cpr { + compatible = "ibm,cpr-440ep"; + dcr-reg = <0x00c 0x002>; + }; + + plb { + compatible = "ibm,plb-440ep", "ibm,plb-440gp", "ibm,plb4"; + #address-cells = <2>; + #size-cells = <1>; + ranges; + clock-frequency = <0>; /* Filled in by zImage */ + + SDRAM0: sdram { + compatible = "ibm,sdram-440ep", "ibm,sdram-405gp"; + dcr-reg = <0x010 0x002>; + }; + + DMA0: dma { + compatible = "ibm,dma-440ep", "ibm,dma-440gp"; + dcr-reg = <0x100 0x027>; + }; + + MAL0: mcmal { + compatible = "ibm,mcmal-440ep", "ibm,mcmal-440gp", "ibm,mcmal"; + dcr-reg = <0x180 0x062>; + num-tx-chans = <4>; + num-rx-chans = <2>; + interrupt-parent = <&MAL0>; + interrupts = <0x0 0x1 0x2 0x3 0x4>; + #interrupt-cells = <1>; + #address-cells = <0>; + #size-cells = <0>; + interrupt-map = </*TXEOB*/ 0x0 &UIC0 0xa 0x4 + /*RXEOB*/ 0x1 &UIC0 0xb 0x4 + /*SERR*/ 0x2 &UIC1 0x0 0x4 + /*TXDE*/ 0x3 &UIC1 0x1 0x4 + /*RXDE*/ 0x4 &UIC1 0x2 0x4>; + }; + + POB0: opb { + compatible = "ibm,opb-440ep", "ibm,opb-440gp", "ibm,opb"; + #address-cells = <1>; + #size-cells = <1>; + /* Bamboo is oddball in the 44x world and doesn't use the ERPN + * bits. + */ + ranges = <0x00000000 0x00000000 0x00000000 0x80000000 + 0x80000000 0x00000000 0x80000000 0x80000000>; + interrupt-parent = <&UIC1>; + interrupts = <0x7 0x4>; + clock-frequency = <0>; /* Filled in by zImage */ + + EBC0: ebc { + compatible = "ibm,ebc-440ep", "ibm,ebc-440gp", "ibm,ebc"; + dcr-reg = <0x012 0x002>; + #address-cells = <2>; + #size-cells = <1>; + clock-frequency = <0>; /* Filled in by zImage */ + interrupts = <0x5 0x1>; + interrupt-parent = <&UIC1>; + }; + + UART0: serial@ef600300 { + device_type = "serial"; + compatible = "ns16550"; + reg = <0xef600300 0x00000008>; + virtual-reg = <0xef600300>; + clock-frequency = <0>; /* Filled in by zImage */ + current-speed = <115200>; + interrupt-parent = <&UIC0>; + interrupts = <0x0 0x4>; + }; + + UART1: serial@ef600400 { + device_type = "serial"; + compatible = "ns16550"; + reg = <0xef600400 0x00000008>; + virtual-reg = <0xef600400>; + clock-frequency = <0>; + current-speed = <0>; + interrupt-parent = <&UIC0>; + interrupts = <0x1 0x4>; + }; + + UART2: serial@ef600500 { + device_type = "serial"; + compatible = "ns16550"; + reg = <0xef600500 0x00000008>; + virtual-reg = <0xef600500>; + clock-frequency = <0>; + current-speed = <0>; + interrupt-parent = <&UIC0>; + interrupts = <0x3 0x4>; + }; + + UART3: serial@ef600600 { + device_type = "serial"; + compatible = "ns16550"; + reg = <0xef600600 0x00000008>; + virtual-reg = <0xef600600>; + clock-frequency = <0>; + current-speed = <0>; + interrupt-parent = <&UIC0>; + interrupts = <0x4 0x4>; + }; + + IIC0: i2c@ef600700 { + compatible = "ibm,iic-440ep", "ibm,iic-440gp", "ibm,iic"; + reg = <0xef600700 0x00000014>; + interrupt-parent = <&UIC0>; + interrupts = <0x2 0x4>; + }; + + IIC1: i2c@ef600800 { + compatible = "ibm,iic-440ep", "ibm,iic-440gp", "ibm,iic"; + reg = <0xef600800 0x00000014>; + interrupt-parent = <&UIC0>; + interrupts = <0x7 0x4>; + }; + + ZMII0: emac-zmii@ef600d00 { + compatible = "ibm,zmii-440ep", "ibm,zmii-440gp", "ibm,zmii"; + reg = <0xef600d00 0x0000000c>; + }; + + EMAC0: ethernet@ef600e00 { + device_type = "network"; + compatible = "ibm,emac-440ep", "ibm,emac-440gp", "ibm,emac"; + interrupt-parent = <&UIC1>; + interrupts = <0x1c 0x4 0x1d 0x4>; + reg = <0xef600e00 0x00000070>; + local-mac-address = [000000000000]; + mal-device = <&MAL0>; + mal-tx-channel = <0 1>; + mal-rx-channel = <0>; + cell-index = <0>; + max-frame-size = <1500>; + rx-fifo-size = <4096>; + tx-fifo-size = <2048>; + phy-mode = "rmii"; + phy-map = <0x00000000>; + zmii-device = <&ZMII0>; + zmii-channel = <0>; + }; + + EMAC1: ethernet@ef600f00 { + device_type = "network"; + compatible = "ibm,emac-440ep", "ibm,emac-440gp", "ibm,emac"; + interrupt-parent = <&UIC1>; + interrupts = <0x1e 0x4 0x1f 0x4>; + reg = <0xef600f00 0x00000070>; + local-mac-address = [000000000000]; + mal-device = <&MAL0>; + mal-tx-channel = <2 3>; + mal-rx-channel = <1>; + cell-index = <1>; + max-frame-size = <1500>; + rx-fifo-size = <4096>; + tx-fifo-size = <2048>; + phy-mode = "rmii"; + phy-map = <0x00000000>; + zmii-device = <&ZMII0>; + zmii-channel = <1>; + }; + + usb@ef601000 { + compatible = "ohci-be"; + reg = <0xef601000 0x00000080>; + interrupts = <0x8 0x1 0x9 0x1>; + interrupt-parent = < &UIC1 >; + }; + }; + + PCI0: pci@ec000000 { + device_type = "pci"; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + compatible = "ibm,plb440ep-pci", "ibm,plb-pci"; + primary; + reg = <0x00000000 0xeec00000 0x00000008 /* Config space access */ + 0x00000000 0xeed00000 0x00000004 /* IACK */ + 0x00000000 0xeed00000 0x00000004 /* Special cycle */ + 0x00000000 0xef400000 0x00000040>; /* Internal registers */ + + /* Outbound ranges, one memory and one IO, + * later cannot be changed. Chip supports a second + * IO range but we don't use it for now + */ + ranges = <0x02000000 0x00000000 0xa0000000 0x00000000 0xa0000000 0x00000000 0x40000000 + 0x02000000 0x00000000 0x00000000 0x00000000 0xe0000000 0x00000000 0x00100000 + 0x01000000 0x00000000 0x00000000 0x00000000 0xe8000000 0x00000000 0x00010000>; + + /* Inbound 2GB range starting at 0 */ + dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x0 0x80000000>; + + /* Bamboo has all 4 IRQ pins tied together per slot */ + interrupt-map-mask = <0xf800 0x0 0x0 0x0>; + interrupt-map = < + /* IDSEL 1 */ + 0x800 0x0 0x0 0x0 &UIC0 0x1c 0x8 + + /* IDSEL 2 */ + 0x1000 0x0 0x0 0x0 &UIC0 0x1b 0x8 + + /* IDSEL 3 */ + 0x1800 0x0 0x0 0x0 &UIC0 0x1a 0x8 + + /* IDSEL 4 */ + 0x2000 0x0 0x0 0x0 &UIC0 0x19 0x8 + >; + }; + }; + + chosen { + linux,stdout-path = "/plb/opb/serial@ef600300"; + }; +}; diff --git a/arch/powerpc/boot/dts/bluestone.dts b/arch/powerpc/boot/dts/bluestone.dts new file mode 100644 index 000000000..7daaca324 --- /dev/null +++ b/arch/powerpc/boot/dts/bluestone.dts @@ -0,0 +1,410 @@ +/* + * Device Tree for Bluestone (APM821xx) board. + * + * Copyright (c) 2010, Applied Micro Circuits Corporation + * Author: Tirumala R Marri <tmarri@apm.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + * + */ + +/dts-v1/; + +/ { + #address-cells = <2>; + #size-cells = <1>; + model = "apm,bluestone"; + compatible = "apm,bluestone"; + dcr-parent = <&{/cpus/cpu@0}>; + + aliases { + ethernet0 = &EMAC0; + serial0 = &UART0; + serial1 = &UART1; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu@0 { + device_type = "cpu"; + model = "PowerPC,apm821xx"; + reg = <0x00000000>; + clock-frequency = <0>; /* Filled in by U-Boot */ + timebase-frequency = <0>; /* Filled in by U-Boot */ + i-cache-line-size = <32>; + d-cache-line-size = <32>; + i-cache-size = <32768>; + d-cache-size = <32768>; + dcr-controller; + dcr-access-method = "native"; + next-level-cache = <&L2C0>; + }; + }; + + memory { + device_type = "memory"; + reg = <0x00000000 0x00000000 0x00000000>; /* Filled in by U-Boot */ + }; + + UIC0: interrupt-controller0 { + compatible = "ibm,uic"; + interrupt-controller; + cell-index = <0>; + dcr-reg = <0x0c0 0x009>; + #address-cells = <0>; + #size-cells = <0>; + #interrupt-cells = <2>; + }; + + UIC1: interrupt-controller1 { + compatible = "ibm,uic"; + interrupt-controller; + cell-index = <1>; + dcr-reg = <0x0d0 0x009>; + #address-cells = <0>; + #size-cells = <0>; + #interrupt-cells = <2>; + interrupts = <0x1e 0x4 0x1f 0x4>; /* cascade */ + interrupt-parent = <&UIC0>; + }; + + UIC2: interrupt-controller2 { + compatible = "ibm,uic"; + interrupt-controller; + cell-index = <2>; + dcr-reg = <0x0e0 0x009>; + #address-cells = <0>; + #size-cells = <0>; + #interrupt-cells = <2>; + interrupts = <0xa 0x4 0xb 0x4>; /* cascade */ + interrupt-parent = <&UIC0>; + }; + + UIC3: interrupt-controller3 { + compatible = "ibm,uic"; + interrupt-controller; + cell-index = <3>; + dcr-reg = <0x0f0 0x009>; + #address-cells = <0>; + #size-cells = <0>; + #interrupt-cells = <2>; + interrupts = <0x10 0x4 0x11 0x4>; /* cascade */ + interrupt-parent = <&UIC0>; + }; + + OCM: ocm@400040000 { + compatible = "ibm,ocm"; + status = "ok"; + cell-index = <1>; + /* configured in U-Boot */ + reg = <4 0x00040000 0x8000>; /* 32K */ + }; + + SDR0: sdr { + compatible = "ibm,sdr-apm821xx"; + dcr-reg = <0x00e 0x002>; + }; + + CPR0: cpr { + compatible = "ibm,cpr-apm821xx"; + dcr-reg = <0x00c 0x002>; + }; + + L2C0: l2c { + compatible = "ibm,l2-cache-apm82181", "ibm,l2-cache"; + dcr-reg = <0x020 0x008 + 0x030 0x008>; + cache-line-size = <32>; + cache-size = <262144>; + interrupt-parent = <&UIC1>; + interrupts = <11 1>; + }; + + plb { + compatible = "ibm,plb4"; + #address-cells = <2>; + #size-cells = <1>; + ranges; + clock-frequency = <0>; /* Filled in by U-Boot */ + + SDRAM0: sdram { + compatible = "ibm,sdram-apm821xx"; + dcr-reg = <0x010 0x002>; + }; + + MAL0: mcmal { + compatible = "ibm,mcmal2"; + descriptor-memory = "ocm"; + dcr-reg = <0x180 0x062>; + num-tx-chans = <1>; + num-rx-chans = <1>; + #address-cells = <0>; + #size-cells = <0>; + interrupt-parent = <&UIC2>; + interrupts = < /*TXEOB*/ 0x6 0x4 + /*RXEOB*/ 0x7 0x4 + /*SERR*/ 0x3 0x4 + /*TXDE*/ 0x4 0x4 + /*RXDE*/ 0x5 0x4>; + }; + + POB0: opb { + compatible = "ibm,opb"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0xb0000000 0x00000004 0xb0000000 0x50000000>; + clock-frequency = <0>; /* Filled in by U-Boot */ + + EBC0: ebc { + compatible = "ibm,ebc"; + dcr-reg = <0x012 0x002>; + #address-cells = <2>; + #size-cells = <1>; + clock-frequency = <0>; /* Filled in by U-Boot */ + /* ranges property is supplied by U-Boot */ + ranges = < 0x00000003 0x00000000 0xe0000000 0x8000000>; + interrupts = <0x6 0x4>; + interrupt-parent = <&UIC1>; + + nor_flash@0,0 { + compatible = "amd,s29gl512n", "cfi-flash"; + bank-width = <2>; + reg = <0x00000000 0x00000000 0x00400000>; + #address-cells = <1>; + #size-cells = <1>; + partition@0 { + label = "kernel"; + reg = <0x00000000 0x00180000>; + }; + partition@180000 { + label = "env"; + reg = <0x00180000 0x00020000>; + }; + partition@1a0000 { + label = "u-boot"; + reg = <0x001a0000 0x00060000>; + }; + }; + + ndfc@1,0 { + compatible = "ibm,ndfc"; + reg = <0x00000003 0x00000000 0x00002000>; + ccr = <0x00001000>; + bank-settings = <0x80002222>; + #address-cells = <1>; + #size-cells = <1>; + /* 2Gb Nand Flash */ + nand { + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "firmware"; + reg = <0x00000000 0x00C00000>; + }; + partition@c00000 { + label = "environment"; + reg = <0x00C00000 0x00B00000>; + }; + partition@1700000 { + label = "kernel"; + reg = <0x01700000 0x00E00000>; + }; + partition@2500000 { + label = "root"; + reg = <0x02500000 0x08200000>; + }; + partition@a700000 { + label = "device-tree"; + reg = <0x0A700000 0x00B00000>; + }; + partition@b200000 { + label = "config"; + reg = <0x0B200000 0x00D00000>; + }; + partition@bf00000 { + label = "diag"; + reg = <0x0BF00000 0x00C00000>; + }; + partition@cb00000 { + label = "vendor"; + reg = <0x0CB00000 0x3500000>; + }; + }; + }; + }; + + UART0: serial@ef600300 { + device_type = "serial"; + compatible = "ns16550"; + reg = <0xef600300 0x00000008>; + virtual-reg = <0xef600300>; + clock-frequency = <0>; /* Filled in by U-Boot */ + current-speed = <0>; /* Filled in by U-Boot */ + interrupt-parent = <&UIC1>; + interrupts = <0x1 0x4>; + }; + + UART1: serial@ef600400 { + device_type = "serial"; + compatible = "ns16550"; + reg = <0xef600400 0x00000008>; + virtual-reg = <0xef600400>; + clock-frequency = <0>; /* Filled in by U-Boot */ + current-speed = <0>; /* Filled in by U-Boot */ + interrupt-parent = <&UIC0>; + interrupts = <0x1 0x4>; + }; + + IIC0: i2c@ef600700 { + compatible = "ibm,iic"; + reg = <0xef600700 0x00000014>; + interrupt-parent = <&UIC0>; + interrupts = <0x2 0x4>; + #address-cells = <1>; + #size-cells = <0>; + rtc@68 { + compatible = "stm,m41t80"; + reg = <0x68>; + interrupt-parent = <&UIC0>; + interrupts = <0x9 0x8>; + }; + sttm@4C { + compatible = "adm,adm1032"; + reg = <0x4C>; + interrupt-parent = <&UIC1>; + interrupts = <0x1E 0x8>; /* CPU_THERNAL_L */ + }; + }; + + IIC1: i2c@ef600800 { + compatible = "ibm,iic"; + reg = <0xef600800 0x00000014>; + interrupt-parent = <&UIC0>; + interrupts = <0x3 0x4>; + }; + + RGMII0: emac-rgmii@ef601500 { + compatible = "ibm,rgmii"; + reg = <0xef601500 0x00000008>; + has-mdio; + }; + + TAH0: emac-tah@ef601350 { + compatible = "ibm,tah"; + reg = <0xef601350 0x00000030>; + }; + + EMAC0: ethernet@ef600c00 { + device_type = "network"; + compatible = "ibm,emac-apm821xx", "ibm,emac4sync"; + interrupt-parent = <&EMAC0>; + interrupts = <0x0 0x1>; + #interrupt-cells = <1>; + #address-cells = <0>; + #size-cells = <0>; + interrupt-map = </*Status*/ 0x0 &UIC2 0x10 0x4 + /*Wake*/ 0x1 &UIC2 0x14 0x4>; + reg = <0xef600c00 0x000000c4>; + local-mac-address = [000000000000]; /* Filled in by U-Boot */ + mal-device = <&MAL0>; + mal-tx-channel = <0>; + mal-rx-channel = <0>; + cell-index = <0>; + max-frame-size = <9000>; + rx-fifo-size = <16384>; + tx-fifo-size = <2048>; + phy-mode = "rgmii"; + phy-map = <0x00000000>; + rgmii-device = <&RGMII0>; + rgmii-channel = <0>; + tah-device = <&TAH0>; + tah-channel = <0>; + has-inverted-stacr-oc; + has-new-stacr-staopc; + }; + }; + + PCIE0: pciex@d00000000 { + device_type = "pci"; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + compatible = "ibm,plb-pciex-apm821xx", "ibm,plb-pciex"; + primary; + port = <0x0>; /* port number */ + reg = <0x0000000d 0x00000000 0x20000000 /* Config space access */ + 0x0000000c 0x08010000 0x00001000>; /* Registers */ + dcr-reg = <0x100 0x020>; + sdr-base = <0x300>; + + /* Outbound ranges, one memory and one IO, + * later cannot be changed + */ + ranges = <0x02000000 0x00000000 0x80000000 0x0000000e 0x00000000 0x00000000 0x80000000 + 0x02000000 0x00000000 0x00000000 0x0000000f 0x00000000 0x00000000 0x00100000 + 0x01000000 0x00000000 0x00000000 0x0000000f 0x80000000 0x00000000 0x00010000>; + + /* Inbound 2GB range starting at 0 */ + dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x0 0x80000000>; + + /* This drives busses 40 to 0x7f */ + bus-range = <0x40 0x7f>; + + /* Legacy interrupts (note the weird polarity, the bridge seems + * to invert PCIe legacy interrupts). + * We are de-swizzling here because the numbers are actually for + * port of the root complex virtual P2P bridge. But I want + * to avoid putting a node for it in the tree, so the numbers + * below are basically de-swizzled numbers. + * The real slot is on idsel 0, so the swizzling is 1:1 + */ + interrupt-map-mask = <0x0 0x0 0x0 0x7>; + interrupt-map = < + 0x0 0x0 0x0 0x1 &UIC3 0xc 0x4 /* swizzled int A */ + 0x0 0x0 0x0 0x2 &UIC3 0xd 0x4 /* swizzled int B */ + 0x0 0x0 0x0 0x3 &UIC3 0xe 0x4 /* swizzled int C */ + 0x0 0x0 0x0 0x4 &UIC3 0xf 0x4 /* swizzled int D */>; + }; + + MSI: ppc4xx-msi@C10000000 { + compatible = "amcc,ppc4xx-msi", "ppc4xx-msi"; + reg = < 0xC 0x10000000 0x100 + 0xC 0x10000000 0x100>; + sdr-base = <0x36C>; + msi-data = <0x00004440>; + msi-mask = <0x0000ffe0>; + interrupts =<0 1 2 3 4 5 6 7>; + interrupt-parent = <&MSI>; + #interrupt-cells = <1>; + #address-cells = <0>; + #size-cells = <0>; + msi-available-ranges = <0x0 0x100>; + interrupt-map = < + 0 &UIC3 0x18 1 + 1 &UIC3 0x19 1 + 2 &UIC3 0x1A 1 + 3 &UIC3 0x1B 1 + 4 &UIC3 0x1C 1 + 5 &UIC3 0x1D 1 + 6 &UIC3 0x1E 1 + 7 &UIC3 0x1F 1 + >; + }; + }; +}; diff --git a/arch/powerpc/boot/dts/bsc9131rdb.dts b/arch/powerpc/boot/dts/bsc9131rdb.dts new file mode 100644 index 000000000..e13d2d487 --- /dev/null +++ b/arch/powerpc/boot/dts/bsc9131rdb.dts @@ -0,0 +1,34 @@ +/* + * BSC9131 RDB Device Tree Source + * + * Copyright 2011-2012 Freescale Semiconductor Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +/include/ "fsl/bsc9131si-pre.dtsi" + +/ { + model = "fsl,bsc9131rdb"; + compatible = "fsl,bsc9131rdb"; + + memory { + device_type = "memory"; + }; + + board_ifc: ifc: ifc@ff71e000 { + /* NAND Flash on board */ + ranges = <0x0 0x0 0x0 0xff800000 0x00004000>; + reg = <0x0 0xff71e000 0x0 0x2000>; + }; + + board_soc: soc: soc@ff700000 { + ranges = <0x0 0x0 0xff700000 0x100000>; + }; +}; + +/include/ "bsc9131rdb.dtsi" +/include/ "fsl/bsc9131si-post.dtsi" diff --git a/arch/powerpc/boot/dts/bsc9131rdb.dtsi b/arch/powerpc/boot/dts/bsc9131rdb.dtsi new file mode 100644 index 000000000..45efcbadb --- /dev/null +++ b/arch/powerpc/boot/dts/bsc9131rdb.dtsi @@ -0,0 +1,92 @@ +/* + * BSC9131 RDB Device Tree Source stub (no addresses or top-level ranges) + * + * Copyright 2011-2012 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +&board_ifc { + + nand@0,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,ifc-nand"; + reg = <0x0 0x0 0x4000>; + + }; +}; + +&board_soc { + /* BSC9131RDB does not have any device on i2c@3100 */ + i2c@3100 { + status = "disabled"; + }; + + spi@7000 { + flash@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "spansion,s25sl12801"; + reg = <0>; + spi-max-frequency = <50000000>; + + }; + }; + + usb@22000 { + phy_type = "ulpi"; + }; + + mdio@24000 { + phy0: ethernet-phy@0 { + interrupts = <3 1 0 0>; + reg = <0x0>; + }; + + phy1: ethernet-phy@1 { + interrupts = <2 1 0 0>; + reg = <0x3>; + }; + }; + + sdhc@2e000 { + status = "disabled"; + }; + + enet0: ethernet@b0000 { + phy-handle = <&phy0>; + phy-connection-type = "rgmii-id"; + }; + + enet1: ethernet@b1000 { + phy-handle = <&phy1>; + phy-connection-type = "rgmii-id"; + }; +}; diff --git a/arch/powerpc/boot/dts/bsc9132qds.dts b/arch/powerpc/boot/dts/bsc9132qds.dts new file mode 100644 index 000000000..6cab1062b --- /dev/null +++ b/arch/powerpc/boot/dts/bsc9132qds.dts @@ -0,0 +1,35 @@ +/* + * BSC9132 QDS Device Tree Source + * + * Copyright 2014 Freescale Semiconductor Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +/include/ "fsl/bsc9132si-pre.dtsi" + +/ { + model = "fsl,bsc9132qds"; + compatible = "fsl,bsc9132qds"; + + memory { + device_type = "memory"; + }; + + ifc: ifc@ff71e000 { + /* NOR, NAND Flash on board */ + ranges = <0x0 0x0 0x0 0x88000000 0x08000000 + 0x1 0x0 0x0 0xff800000 0x00010000>; + reg = <0x0 0xff71e000 0x0 0x2000>; + }; + + soc: soc@ff700000 { + ranges = <0x0 0x0 0xff700000 0x100000>; + }; +}; + +/include/ "bsc9132qds.dtsi" +/include/ "fsl/bsc9132si-post.dtsi" diff --git a/arch/powerpc/boot/dts/bsc9132qds.dtsi b/arch/powerpc/boot/dts/bsc9132qds.dtsi new file mode 100644 index 000000000..af8e88830 --- /dev/null +++ b/arch/powerpc/boot/dts/bsc9132qds.dtsi @@ -0,0 +1,101 @@ +/* + * BSC9132 QDS Device Tree Source stub (no addresses or top-level ranges) + * + * Copyright 2014 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +&ifc { + nor@0,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "cfi-flash"; + reg = <0x0 0x0 0x8000000>; + bank-width = <2>; + device-width = <1>; + }; + + nand@1,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,ifc-nand"; + reg = <0x1 0x0 0x4000>; + }; +}; + +&soc { + spi@7000 { + flash@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "spansion,s25sl12801"; + reg = <0>; + spi-max-frequency = <30000000>; + }; + }; + + i2c@3000 { + fpga: fpga@66 { + compatible = "fsl,bsc9132qds-fpga", "fsl,fpga-qixis-i2c"; + reg = <0x66>; + }; + }; + + usb@22000 { + phy_type = "ulpi"; + }; + + mdio@24000 { + phy0: ethernet-phy@0 { + reg = <0x0>; + }; + + phy1: ethernet-phy@1 { + reg = <0x1>; + }; + + tbi0: tbi-phy@11 { + reg = <0x1f>; + device_type = "tbi-phy"; + }; + }; + + enet0: ethernet@b0000 { + phy-handle = <&phy0>; + tbi-handle = <&tbi0>; + phy-connection-type = "sgmii"; + }; + + enet1: ethernet@b1000 { + phy-handle = <&phy1>; + tbi-handle = <&tbi0>; + phy-connection-type = "sgmii"; + }; +}; diff --git a/arch/powerpc/boot/dts/c293pcie.dts b/arch/powerpc/boot/dts/c293pcie.dts new file mode 100644 index 000000000..6681cc210 --- /dev/null +++ b/arch/powerpc/boot/dts/c293pcie.dts @@ -0,0 +1,224 @@ +/* + * C293 PCIE Device Tree Source + * + * Copyright 2013 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor "AS IS" AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +/include/ "fsl/c293si-pre.dtsi" + +/ { + model = "fsl,C293PCIE"; + compatible = "fsl,C293PCIE"; + + memory { + device_type = "memory"; + }; + + ifc: ifc@fffe1e000 { + reg = <0xf 0xffe1e000 0 0x2000>; + ranges = <0x0 0x0 0xf 0xec000000 0x04000000 + 0x1 0x0 0xf 0xff800000 0x00010000 + 0x2 0x0 0xf 0xffdf0000 0x00010000>; + + }; + + soc: soc@fffe00000 { + ranges = <0x0 0xf 0xffe00000 0x100000>; + }; + + pci0: pcie@fffe0a000 { + reg = <0xf 0xffe0a000 0 0x1000>; + ranges = <0x2000000 0x0 0x80000000 0xc 0x00000000 0x0 0x20000000 + 0x1000000 0x0 0x00000000 0xf 0xffc00000 0x0 0x10000>; + pcie@0 { + ranges = <0x2000000 0x0 0x80000000 + 0x2000000 0x0 0x80000000 + 0x0 0x20000000 + + 0x1000000 0x0 0x0 + 0x1000000 0x0 0x0 + 0x0 0x100000>; + }; + }; +}; + +&ifc { + nor@0,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "cfi-flash"; + reg = <0x0 0x0 0x4000000>; + bank-width = <2>; + device-width = <1>; + + partition@0 { + /* 1MB for DTB Image */ + reg = <0x0 0x00100000>; + label = "NOR DTB Image"; + }; + + partition@100000 { + /* 8 MB for Linux Kernel Image */ + reg = <0x00100000 0x00800000>; + label = "NOR Linux Kernel Image"; + }; + + partition@900000 { + /* 53MB for rootfs */ + reg = <0x00900000 0x03500000>; + label = "NOR Rootfs Image"; + }; + + partition@3e00000 { + /* 1MB for blob encrypted key */ + reg = <0x03e00000 0x00100000>; + label = "NOR blob encrypted key"; + }; + + partition@3f00000 { + /* 512KB for u-boot Bootloader Image and evn */ + reg = <0x03f00000 0x00100000>; + label = "NOR U-Boot Image"; + read-only; + }; + }; + + nand@1,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,ifc-nand"; + reg = <0x1 0x0 0x10000>; + + partition@0 { + /* This location must not be altered */ + /* 1MB for u-boot Bootloader Image */ + reg = <0x0 0x00100000>; + label = "NAND U-Boot Image"; + read-only; + }; + + partition@100000 { + /* 1MB for DTB Image */ + reg = <0x00100000 0x00100000>; + label = "NAND DTB Image"; + }; + + partition@200000 { + /* 16MB for Linux Kernel Image */ + reg = <0x00200000 0x01000000>; + label = "NAND Linux Kernel Image"; + }; + + partition@1200000 { + /* 4078MB for Root file System Image */ + reg = <0x00600000 0xfee00000>; + label = "NAND RFS Image"; + }; + }; + + cpld@2,0 { + compatible = "fsl,c293pcie-cpld"; + reg = <0x2 0x0 0x20>; + }; +}; + +&soc { + i2c@3000 { + eeprom@50 { + compatible = "st,24c1024"; + reg = <0x50>; + }; + + adt7461@4c { + compatible = "adi,adt7461"; + reg = <0x4c>; + }; + }; + + spi@7000 { + flash@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "spansion,s25sl12801"; + reg = <0>; + spi-max-frequency = <50000000>; + + partition@0 { + /* 1MB for u-boot Bootloader Image */ + /* 1MB for Environment */ + reg = <0x0 0x00100000>; + label = "SPI Flash U-Boot Image"; + read-only; + }; + + partition@100000 { + /* 512KB for DTB Image */ + reg = <0x00100000 0x00080000>; + label = "SPI Flash DTB Image"; + }; + + partition@180000 { + /* 4MB for Linux Kernel Image */ + reg = <0x00180000 0x00400000>; + label = "SPI Flash Linux Kernel Image"; + }; + + partition@580000 { + /* 10.5MB for RFS Image */ + reg = <0x00580000 0x00a80000>; + label = "SPI Flash RFS Image"; + }; + }; + }; + + mdio@24000 { + phy0: ethernet-phy@0 { + interrupts = <2 1 0 0>; + reg = <0x0>; + }; + + phy1: ethernet-phy@1 { + interrupts = <2 1 0 0>; + reg = <0x2>; + }; + }; + + enet0: ethernet@b0000 { + phy-handle = <&phy0>; + phy-connection-type = "rgmii-id"; + }; + + enet1: ethernet@b1000 { + phy-handle = <&phy1>; + phy-connection-type = "rgmii-id"; + }; +}; +/include/ "fsl/c293si-post.dtsi" diff --git a/arch/powerpc/boot/dts/c2k.dts b/arch/powerpc/boot/dts/c2k.dts new file mode 100644 index 000000000..1e32903cb --- /dev/null +++ b/arch/powerpc/boot/dts/c2k.dts @@ -0,0 +1,366 @@ +/* Device Tree Source for GEFanuc C2K + * + * Author: Remi Machet <rmachet@slac.stanford.edu> + * + * Originated from prpmc2800.dts + * + * 2008 (c) Stanford University + * 2007 (c) MontaVista, Software, Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +/dts-v1/; + +/ { + #address-cells = <1>; + #size-cells = <1>; + model = "C2K"; + compatible = "GEFanuc,C2K"; + coherency-off; + + aliases { + pci0 = &PCI0; + pci1 = &PCI1; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu@0 { + device_type = "cpu"; + compatible = "PowerPC,7447"; + reg = <0>; + clock-frequency = <996000000>; /* 996 MHz */ + bus-frequency = <166666667>; /* 166.6666 MHz */ + timebase-frequency = <41666667>; /* 166.6666/4 MHz */ + i-cache-line-size = <32>; + d-cache-line-size = <32>; + i-cache-size = <32768>; + d-cache-size = <32768>; + }; + }; + + memory { + device_type = "memory"; + reg = <0x00000000 0x40000000>; /* 1GB */ + }; + + system-controller@d8000000 { /* Marvell Discovery */ + #address-cells = <1>; + #size-cells = <1>; + model = "mv64460"; + compatible = "marvell,mv64360"; + clock-frequency = <166666667>; /* 166.66... MHz */ + reg = <0xd8000000 0x00010000>; + virtual-reg = <0xd8000000>; + ranges = <0xd4000000 0xd4000000 0x01000000 /* PCI 0 I/O Space */ + 0x80000000 0x80000000 0x08000000 /* PCI 0 MEM Space */ + 0xd0000000 0xd0000000 0x01000000 /* PCI 1 I/O Space */ + 0xa0000000 0xa0000000 0x08000000 /* PCI 1 MEM Space */ + 0xd8100000 0xd8100000 0x00010000 /* FPGA */ + 0xd8110000 0xd8110000 0x00010000 /* FPGA USARTs */ + 0xf8000000 0xf8000000 0x08000000 /* User FLASH */ + 0x00000000 0xd8000000 0x00010000 /* Bridge's regs */ + 0xd8140000 0xd8140000 0x00040000>; /* Integrated SRAM */ + + mdio@2000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "marvell,mv64360-mdio"; + reg = <0x2000 4>; + PHY0: ethernet-phy@0 { + interrupts = <76>; /* GPP 12 */ + interrupt-parent = <&PIC>; + reg = <0>; + }; + PHY1: ethernet-phy@1 { + interrupts = <76>; /* GPP 12 */ + interrupt-parent = <&PIC>; + reg = <1>; + }; + PHY2: ethernet-phy@2 { + interrupts = <76>; /* GPP 12 */ + interrupt-parent = <&PIC>; + reg = <2>; + }; + }; + + ethernet-group@2000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "marvell,mv64360-eth-group"; + reg = <0x2000 0x2000>; + ethernet@0 { + device_type = "network"; + compatible = "marvell,mv64360-eth"; + reg = <0>; + interrupts = <32>; + interrupt-parent = <&PIC>; + phy = <&PHY0>; + local-mac-address = [ 00 00 00 00 00 00 ]; + }; + ethernet@1 { + device_type = "network"; + compatible = "marvell,mv64360-eth"; + reg = <1>; + interrupts = <33>; + interrupt-parent = <&PIC>; + phy = <&PHY1>; + local-mac-address = [ 00 00 00 00 00 00 ]; + }; + ethernet@2 { + device_type = "network"; + compatible = "marvell,mv64360-eth"; + reg = <2>; + interrupts = <34>; + interrupt-parent = <&PIC>; + phy = <&PHY2>; + local-mac-address = [ 00 00 00 00 00 00 ]; + }; + }; + + SDMA0: sdma@4000 { + compatible = "marvell,mv64360-sdma"; + reg = <0x4000 0xc18>; + virtual-reg = <0xd8004000>; + interrupt-base = <0>; + interrupts = <36>; + interrupt-parent = <&PIC>; + }; + + SDMA1: sdma@6000 { + compatible = "marvell,mv64360-sdma"; + reg = <0x6000 0xc18>; + virtual-reg = <0xd8006000>; + interrupt-base = <0>; + interrupts = <38>; + interrupt-parent = <&PIC>; + }; + + BRG0: brg@b200 { + compatible = "marvell,mv64360-brg"; + reg = <0xb200 0x8>; + clock-src = <8>; + clock-frequency = <133333333>; + current-speed = <115200>; + }; + + BRG1: brg@b208 { + compatible = "marvell,mv64360-brg"; + reg = <0xb208 0x8>; + clock-src = <8>; + clock-frequency = <133333333>; + current-speed = <115200>; + }; + + CUNIT: cunit@f200 { + reg = <0xf200 0x200>; + }; + + MPSCROUTING: mpscrouting@b400 { + reg = <0xb400 0xc>; + }; + + MPSCINTR: mpscintr@b800 { + reg = <0xb800 0x100>; + virtual-reg = <0xd800b800>; + }; + + MPSC0: mpsc@8000 { + compatible = "marvell,mv64360-mpsc"; + reg = <0x8000 0x38>; + virtual-reg = <0xd8008000>; + sdma = <&SDMA0>; + brg = <&BRG0>; + cunit = <&CUNIT>; + mpscrouting = <&MPSCROUTING>; + mpscintr = <&MPSCINTR>; + cell-index = <0>; + interrupts = <40>; + interrupt-parent = <&PIC>; + }; + + MPSC1: mpsc@9000 { + compatible = "marvell,mv64360-mpsc"; + reg = <0x9000 0x38>; + virtual-reg = <0xd8009000>; + sdma = <&SDMA1>; + brg = <&BRG1>; + cunit = <&CUNIT>; + mpscrouting = <&MPSCROUTING>; + mpscintr = <&MPSCINTR>; + cell-index = <1>; + interrupts = <42>; + interrupt-parent = <&PIC>; + }; + + wdt@b410 { /* watchdog timer */ + compatible = "marvell,mv64360-wdt"; + reg = <0xb410 0x8>; + }; + + i2c@c000 { + compatible = "marvell,mv64360-i2c"; + reg = <0xc000 0x20>; + virtual-reg = <0xd800c000>; + interrupts = <37>; + interrupt-parent = <&PIC>; + }; + + PIC: pic { + #interrupt-cells = <1>; + #address-cells = <0>; + compatible = "marvell,mv64360-pic"; + reg = <0x0000 0x88>; + interrupt-controller; + }; + + mpp@f000 { + compatible = "marvell,mv64360-mpp"; + reg = <0xf000 0x10>; + }; + + gpp@f100 { + compatible = "marvell,mv64360-gpp"; + reg = <0xf100 0x20>; + }; + + PCI0: pci@80000000 { + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + device_type = "pci"; + compatible = "marvell,mv64360-pci"; + reg = <0x0cf8 0x8>; + ranges = <0x01000000 0x0 0x00000000 0xd4000000 0x0 0x01000000 + 0x02000000 0x0 0x80000000 0x80000000 0x0 0x08000000>; + bus-range = <0 255>; + clock-frequency = <66000000>; + interrupt-pci-iack = <0x0c34>; + interrupt-parent = <&PIC>; + interrupt-map-mask = <0x0000 0x0 0x0 0x7>; + interrupt-map = < + /* Only one interrupt line for PMC0 slot (INTA) */ + 0x0000 0 0 1 &PIC 88 + >; + }; + + + PCI1: pci@a0000000 { + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + device_type = "pci"; + compatible = "marvell,mv64360-pci"; + reg = <0x0c78 0x8>; + ranges = <0x01000000 0x0 0x00000000 0xd0000000 0x0 0x01000000 + 0x02000000 0x0 0x80000000 0xa0000000 0x0 0x08000000>; + bus-range = <0 255>; + clock-frequency = <66000000>; + interrupt-pci-iack = <0x0cb4>; + interrupt-parent = <&PIC>; + interrupt-map-mask = <0xf800 0x00 0x00 0x7>; + interrupt-map = < + /* IDSEL 0x01: PMC1 ? */ + 0x0800 0 0 1 &PIC 88 + /* IDSEL 0x02: cPCI bridge */ + 0x1000 0 0 1 &PIC 88 + /* IDSEL 0x03: USB controller */ + 0x1800 0 0 1 &PIC 91 + /* IDSEL 0x04: SATA controller */ + 0x2000 0 0 1 &PIC 95 + >; + }; + + cpu-error@0070 { + compatible = "marvell,mv64360-cpu-error"; + reg = <0x0070 0x10 0x0128 0x28>; + interrupts = <3>; + interrupt-parent = <&PIC>; + }; + + sram-ctrl@0380 { + compatible = "marvell,mv64360-sram-ctrl"; + reg = <0x0380 0x80>; + interrupts = <13>; + interrupt-parent = <&PIC>; + }; + + pci-error@1d40 { + compatible = "marvell,mv64360-pci-error"; + reg = <0x1d40 0x40 0x0c28 0x4>; + interrupts = <12>; + interrupt-parent = <&PIC>; + }; + + pci-error@1dc0 { + compatible = "marvell,mv64360-pci-error"; + reg = <0x1dc0 0x40 0x0ca8 0x4>; + interrupts = <16>; + interrupt-parent = <&PIC>; + }; + + mem-ctrl@1400 { + compatible = "marvell,mv64360-mem-ctrl"; + reg = <0x1400 0x60>; + interrupts = <17>; + interrupt-parent = <&PIC>; + }; + /* Devices attached to the device controller */ + devicebus@045c { + #address-cells = <2>; + #size-cells = <1>; + compatible = "marvell,mv64306-devctrl"; + reg = <0x45C 0x88>; + interrupts = <1>; + interrupt-parent = <&PIC>; + ranges = <0 0 0xd8100000 0x10000 + 2 0 0xd8110000 0x10000 + 4 0 0xf8000000 0x8000000>; + fpga@0,0 { + compatible = "sbs,fpga-c2k"; + reg = <0 0 0x10000>; + }; + fpga_usart@2,0 { + compatible = "sbs,fpga_usart-c2k"; + reg = <2 0 0x10000>; + }; + nor_flash@4,0 { + compatible = "cfi-flash"; + reg = <4 0 0x8000000>; /* 128MB */ + bank-width = <4>; + device-width = <1>; + #address-cells = <1>; + #size-cells = <1>; + partition@0 { + label = "boot"; + reg = <0x00000000 0x00080000>; + }; + partition@40000 { + label = "kernel"; + reg = <0x00080000 0x00400000>; + }; + partition@440000 { + label = "initrd"; + reg = <0x00480000 0x00B80000>; + }; + partition@1000000 { + label = "rootfs"; + reg = <0x01000000 0x06800000>; + }; + partition@7800000 { + label = "recovery"; + reg = <0x07800000 0x00800000>; + read-only; + }; + }; + }; + }; + chosen { + linux,stdout-path = &MPSC0; + }; +}; diff --git a/arch/powerpc/boot/dts/canyonlands.dts b/arch/powerpc/boot/dts/canyonlands.dts new file mode 100644 index 000000000..3dc75deaf --- /dev/null +++ b/arch/powerpc/boot/dts/canyonlands.dts @@ -0,0 +1,557 @@ +/* + * Device Tree Source for AMCC Canyonlands (460EX) + * + * Copyright 2008-2009 DENX Software Engineering, Stefan Roese <sr@denx.de> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without + * any warranty of any kind, whether express or implied. + */ + +/dts-v1/; + +/ { + #address-cells = <2>; + #size-cells = <1>; + model = "amcc,canyonlands"; + compatible = "amcc,canyonlands"; + dcr-parent = <&{/cpus/cpu@0}>; + + aliases { + ethernet0 = &EMAC0; + ethernet1 = &EMAC1; + serial0 = &UART0; + serial1 = &UART1; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu@0 { + device_type = "cpu"; + model = "PowerPC,460EX"; + reg = <0x00000000>; + clock-frequency = <0>; /* Filled in by U-Boot */ + timebase-frequency = <0>; /* Filled in by U-Boot */ + i-cache-line-size = <32>; + d-cache-line-size = <32>; + i-cache-size = <32768>; + d-cache-size = <32768>; + dcr-controller; + dcr-access-method = "native"; + next-level-cache = <&L2C0>; + }; + }; + + memory { + device_type = "memory"; + reg = <0x00000000 0x00000000 0x00000000>; /* Filled in by U-Boot */ + }; + + UIC0: interrupt-controller0 { + compatible = "ibm,uic-460ex","ibm,uic"; + interrupt-controller; + cell-index = <0>; + dcr-reg = <0x0c0 0x009>; + #address-cells = <0>; + #size-cells = <0>; + #interrupt-cells = <2>; + }; + + UIC1: interrupt-controller1 { + compatible = "ibm,uic-460ex","ibm,uic"; + interrupt-controller; + cell-index = <1>; + dcr-reg = <0x0d0 0x009>; + #address-cells = <0>; + #size-cells = <0>; + #interrupt-cells = <2>; + interrupts = <0x1e 0x4 0x1f 0x4>; /* cascade */ + interrupt-parent = <&UIC0>; + }; + + UIC2: interrupt-controller2 { + compatible = "ibm,uic-460ex","ibm,uic"; + interrupt-controller; + cell-index = <2>; + dcr-reg = <0x0e0 0x009>; + #address-cells = <0>; + #size-cells = <0>; + #interrupt-cells = <2>; + interrupts = <0xa 0x4 0xb 0x4>; /* cascade */ + interrupt-parent = <&UIC0>; + }; + + UIC3: interrupt-controller3 { + compatible = "ibm,uic-460ex","ibm,uic"; + interrupt-controller; + cell-index = <3>; + dcr-reg = <0x0f0 0x009>; + #address-cells = <0>; + #size-cells = <0>; + #interrupt-cells = <2>; + interrupts = <0x10 0x4 0x11 0x4>; /* cascade */ + interrupt-parent = <&UIC0>; + }; + + SDR0: sdr { + compatible = "ibm,sdr-460ex"; + dcr-reg = <0x00e 0x002>; + }; + + CPR0: cpr { + compatible = "ibm,cpr-460ex"; + dcr-reg = <0x00c 0x002>; + }; + + CPM0: cpm { + compatible = "ibm,cpm"; + dcr-access-method = "native"; + dcr-reg = <0x160 0x003>; + unused-units = <0x00000100>; + idle-doze = <0x02000000>; + standby = <0xfeff791d>; + }; + + L2C0: l2c { + compatible = "ibm,l2-cache-460ex", "ibm,l2-cache"; + dcr-reg = <0x020 0x008 /* Internal SRAM DCR's */ + 0x030 0x008>; /* L2 cache DCR's */ + cache-line-size = <32>; /* 32 bytes */ + cache-size = <262144>; /* L2, 256K */ + interrupt-parent = <&UIC1>; + interrupts = <11 1>; + }; + + plb { + compatible = "ibm,plb-460ex", "ibm,plb4"; + #address-cells = <2>; + #size-cells = <1>; + ranges; + clock-frequency = <0>; /* Filled in by U-Boot */ + + SDRAM0: sdram { + compatible = "ibm,sdram-460ex", "ibm,sdram-405gp"; + dcr-reg = <0x010 0x002>; + }; + + CRYPTO: crypto@180000 { + compatible = "amcc,ppc460ex-crypto", "amcc,ppc4xx-crypto"; + reg = <4 0x00180000 0x80400>; + interrupt-parent = <&UIC0>; + interrupts = <0x1d 0x4>; + }; + + HWRNG: hwrng@110000 { + compatible = "amcc,ppc460ex-rng", "ppc4xx-rng"; + reg = <4 0x00110000 0x50>; + }; + + MAL0: mcmal { + compatible = "ibm,mcmal-460ex", "ibm,mcmal2"; + dcr-reg = <0x180 0x062>; + num-tx-chans = <2>; + num-rx-chans = <16>; + #address-cells = <0>; + #size-cells = <0>; + interrupt-parent = <&UIC2>; + interrupts = < /*TXEOB*/ 0x6 0x4 + /*RXEOB*/ 0x7 0x4 + /*SERR*/ 0x3 0x4 + /*TXDE*/ 0x4 0x4 + /*RXDE*/ 0x5 0x4>; + }; + + USB0: ehci@bffd0400 { + compatible = "ibm,usb-ehci-460ex", "usb-ehci"; + interrupt-parent = <&UIC2>; + interrupts = <0x1d 4>; + reg = <4 0xbffd0400 0x90 4 0xbffd0490 0x70>; + }; + + USB1: usb@bffd0000 { + compatible = "ohci-le"; + reg = <4 0xbffd0000 0x60>; + interrupt-parent = <&UIC2>; + interrupts = <0x1e 4>; + }; + + USBOTG0: usbotg@bff80000 { + compatible = "amcc,dwc-otg"; + reg = <0x4 0xbff80000 0x10000>; + interrupt-parent = <&USBOTG0>; + #interrupt-cells = <1>; + #address-cells = <0>; + #size-cells = <0>; + interrupts = <0x0 0x1 0x2>; + interrupt-map = </* USB-OTG */ 0x0 &UIC2 0x1c 0x4 + /* HIGH-POWER */ 0x1 &UIC1 0x1a 0x8 + /* DMA */ 0x2 &UIC0 0xc 0x4>; + }; + + SATA0: sata@bffd1000 { + compatible = "amcc,sata-460ex"; + reg = <4 0xbffd1000 0x800 4 0xbffd0800 0x400>; + interrupt-parent = <&UIC3>; + interrupts = <0x0 0x4 /* SATA */ + 0x5 0x4>; /* AHBDMA */ + }; + + POB0: opb { + compatible = "ibm,opb-460ex", "ibm,opb"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0xb0000000 0x00000004 0xb0000000 0x50000000>; + clock-frequency = <0>; /* Filled in by U-Boot */ + + EBC0: ebc { + compatible = "ibm,ebc-460ex", "ibm,ebc"; + dcr-reg = <0x012 0x002>; + #address-cells = <2>; + #size-cells = <1>; + clock-frequency = <0>; /* Filled in by U-Boot */ + /* ranges property is supplied by U-Boot */ + interrupts = <0x6 0x4>; + interrupt-parent = <&UIC1>; + + nor_flash@0,0 { + compatible = "amd,s29gl512n", "cfi-flash"; + bank-width = <2>; + reg = <0x00000000 0x00000000 0x04000000>; + #address-cells = <1>; + #size-cells = <1>; + partition@0 { + label = "kernel"; + reg = <0x00000000 0x001e0000>; + }; + partition@1e0000 { + label = "dtb"; + reg = <0x001e0000 0x00020000>; + }; + partition@200000 { + label = "ramdisk"; + reg = <0x00200000 0x01400000>; + }; + partition@1600000 { + label = "jffs2"; + reg = <0x01600000 0x00400000>; + }; + partition@1a00000 { + label = "user"; + reg = <0x01a00000 0x02560000>; + }; + partition@3f60000 { + label = "env"; + reg = <0x03f60000 0x00040000>; + }; + partition@3fa0000 { + label = "u-boot"; + reg = <0x03fa0000 0x00060000>; + }; + }; + + cpld@2,0 { + compatible = "amcc,ppc460ex-bcsr"; + reg = <2 0x0 0x9>; + }; + + ndfc@3,0 { + compatible = "ibm,ndfc"; + reg = <0x00000003 0x00000000 0x00002000>; + ccr = <0x00001000>; + bank-settings = <0x80002222>; + #address-cells = <1>; + #size-cells = <1>; + + nand { + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "u-boot"; + reg = <0x00000000 0x00100000>; + }; + partition@100000 { + label = "user"; + reg = <0x00000000 0x03f00000>; + }; + }; + }; + }; + + UART0: serial@ef600300 { + device_type = "serial"; + compatible = "ns16550"; + reg = <0xef600300 0x00000008>; + virtual-reg = <0xef600300>; + clock-frequency = <0>; /* Filled in by U-Boot */ + current-speed = <0>; /* Filled in by U-Boot */ + interrupt-parent = <&UIC1>; + interrupts = <0x1 0x4>; + }; + + UART1: serial@ef600400 { + device_type = "serial"; + compatible = "ns16550"; + reg = <0xef600400 0x00000008>; + virtual-reg = <0xef600400>; + clock-frequency = <0>; /* Filled in by U-Boot */ + current-speed = <0>; /* Filled in by U-Boot */ + interrupt-parent = <&UIC0>; + interrupts = <0x1 0x4>; + }; + + IIC0: i2c@ef600700 { + compatible = "ibm,iic-460ex", "ibm,iic"; + reg = <0xef600700 0x00000014>; + interrupt-parent = <&UIC0>; + interrupts = <0x2 0x4>; + #address-cells = <1>; + #size-cells = <0>; + rtc@68 { + compatible = "stm,m41t80"; + reg = <0x68>; + interrupt-parent = <&UIC2>; + interrupts = <0x19 0x8>; + }; + sttm@48 { + compatible = "ad,ad7414"; + reg = <0x48>; + interrupt-parent = <&UIC1>; + interrupts = <0x14 0x8>; + }; + }; + + IIC1: i2c@ef600800 { + compatible = "ibm,iic-460ex", "ibm,iic"; + reg = <0xef600800 0x00000014>; + interrupt-parent = <&UIC0>; + interrupts = <0x3 0x4>; + }; + + GPIO0: gpio@ef600b00 { + compatible = "ibm,ppc4xx-gpio"; + reg = <0xef600b00 0x00000048>; + gpio-controller; + }; + + ZMII0: emac-zmii@ef600d00 { + compatible = "ibm,zmii-460ex", "ibm,zmii"; + reg = <0xef600d00 0x0000000c>; + }; + + RGMII0: emac-rgmii@ef601500 { + compatible = "ibm,rgmii-460ex", "ibm,rgmii"; + reg = <0xef601500 0x00000008>; + has-mdio; + }; + + TAH0: emac-tah@ef601350 { + compatible = "ibm,tah-460ex", "ibm,tah"; + reg = <0xef601350 0x00000030>; + }; + + TAH1: emac-tah@ef601450 { + compatible = "ibm,tah-460ex", "ibm,tah"; + reg = <0xef601450 0x00000030>; + }; + + EMAC0: ethernet@ef600e00 { + device_type = "network"; + compatible = "ibm,emac-460ex", "ibm,emac4sync"; + interrupt-parent = <&EMAC0>; + interrupts = <0x0 0x1>; + #interrupt-cells = <1>; + #address-cells = <0>; + #size-cells = <0>; + interrupt-map = </*Status*/ 0x0 &UIC2 0x10 0x4 + /*Wake*/ 0x1 &UIC2 0x14 0x4>; + reg = <0xef600e00 0x000000c4>; + local-mac-address = [000000000000]; /* Filled in by U-Boot */ + mal-device = <&MAL0>; + mal-tx-channel = <0>; + mal-rx-channel = <0>; + cell-index = <0>; + max-frame-size = <9000>; + rx-fifo-size = <4096>; + tx-fifo-size = <2048>; + rx-fifo-size-gige = <16384>; + phy-mode = "rgmii"; + phy-map = <0x00000000>; + rgmii-device = <&RGMII0>; + rgmii-channel = <0>; + tah-device = <&TAH0>; + tah-channel = <0>; + has-inverted-stacr-oc; + has-new-stacr-staopc; + }; + + EMAC1: ethernet@ef600f00 { + device_type = "network"; + compatible = "ibm,emac-460ex", "ibm,emac4sync"; + interrupt-parent = <&EMAC1>; + interrupts = <0x0 0x1>; + #interrupt-cells = <1>; + #address-cells = <0>; + #size-cells = <0>; + interrupt-map = </*Status*/ 0x0 &UIC2 0x11 0x4 + /*Wake*/ 0x1 &UIC2 0x15 0x4>; + reg = <0xef600f00 0x000000c4>; + local-mac-address = [000000000000]; /* Filled in by U-Boot */ + mal-device = <&MAL0>; + mal-tx-channel = <1>; + mal-rx-channel = <8>; + cell-index = <1>; + max-frame-size = <9000>; + rx-fifo-size = <4096>; + tx-fifo-size = <2048>; + rx-fifo-size-gige = <16384>; + phy-mode = "rgmii"; + phy-map = <0x00000000>; + rgmii-device = <&RGMII0>; + rgmii-channel = <1>; + tah-device = <&TAH1>; + tah-channel = <1>; + has-inverted-stacr-oc; + has-new-stacr-staopc; + mdio-device = <&EMAC0>; + }; + }; + + PCIX0: pci@c0ec00000 { + device_type = "pci"; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + compatible = "ibm,plb-pcix-460ex", "ibm,plb-pcix"; + primary; + large-inbound-windows; + enable-msi-hole; + reg = <0x0000000c 0x0ec00000 0x00000008 /* Config space access */ + 0x00000000 0x00000000 0x00000000 /* no IACK cycles */ + 0x0000000c 0x0ed00000 0x00000004 /* Special cycles */ + 0x0000000c 0x0ec80000 0x00000100 /* Internal registers */ + 0x0000000c 0x0ec80100 0x000000fc>; /* Internal messaging registers */ + + /* Outbound ranges, one memory and one IO, + * later cannot be changed + */ + ranges = <0x02000000 0x00000000 0x80000000 0x0000000d 0x80000000 0x00000000 0x80000000 + 0x02000000 0x00000000 0x00000000 0x0000000c 0x0ee00000 0x00000000 0x00100000 + 0x01000000 0x00000000 0x00000000 0x0000000c 0x08000000 0x00000000 0x00010000>; + + /* Inbound 2GB range starting at 0 */ + dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x0 0x80000000>; + + /* This drives busses 0 to 0x3f */ + bus-range = <0x0 0x3f>; + + /* All PCI interrupts are routed to ext IRQ 2 -> UIC1-0 */ + interrupt-map-mask = <0x0 0x0 0x0 0x0>; + interrupt-map = < 0x0 0x0 0x0 0x0 &UIC1 0x0 0x8 >; + }; + + PCIE0: pciex@d00000000 { + device_type = "pci"; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + compatible = "ibm,plb-pciex-460ex", "ibm,plb-pciex"; + primary; + port = <0x0>; /* port number */ + reg = <0x0000000d 0x00000000 0x20000000 /* Config space access */ + 0x0000000c 0x08010000 0x00001000>; /* Registers */ + dcr-reg = <0x100 0x020>; + sdr-base = <0x300>; + + /* Outbound ranges, one memory and one IO, + * later cannot be changed + */ + ranges = <0x02000000 0x00000000 0x80000000 0x0000000e 0x00000000 0x00000000 0x80000000 + 0x02000000 0x00000000 0x00000000 0x0000000f 0x00000000 0x00000000 0x00100000 + 0x01000000 0x00000000 0x00000000 0x0000000f 0x80000000 0x00000000 0x00010000>; + + /* Inbound 2GB range starting at 0 */ + dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x0 0x80000000>; + + /* This drives busses 40 to 0x7f */ + bus-range = <0x40 0x7f>; + + /* Legacy interrupts (note the weird polarity, the bridge seems + * to invert PCIe legacy interrupts). + * We are de-swizzling here because the numbers are actually for + * port of the root complex virtual P2P bridge. But I want + * to avoid putting a node for it in the tree, so the numbers + * below are basically de-swizzled numbers. + * The real slot is on idsel 0, so the swizzling is 1:1 + */ + interrupt-map-mask = <0x0 0x0 0x0 0x7>; + interrupt-map = < + 0x0 0x0 0x0 0x1 &UIC3 0xc 0x4 /* swizzled int A */ + 0x0 0x0 0x0 0x2 &UIC3 0xd 0x4 /* swizzled int B */ + 0x0 0x0 0x0 0x3 &UIC3 0xe 0x4 /* swizzled int C */ + 0x0 0x0 0x0 0x4 &UIC3 0xf 0x4 /* swizzled int D */>; + }; + + PCIE1: pciex@d20000000 { + device_type = "pci"; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + compatible = "ibm,plb-pciex-460ex", "ibm,plb-pciex"; + primary; + port = <0x1>; /* port number */ + reg = <0x0000000d 0x20000000 0x20000000 /* Config space access */ + 0x0000000c 0x08011000 0x00001000>; /* Registers */ + dcr-reg = <0x120 0x020>; + sdr-base = <0x340>; + + /* Outbound ranges, one memory and one IO, + * later cannot be changed + */ + ranges = <0x02000000 0x00000000 0x80000000 0x0000000e 0x80000000 0x00000000 0x80000000 + 0x02000000 0x00000000 0x00000000 0x0000000f 0x00100000 0x00000000 0x00100000 + 0x01000000 0x00000000 0x00000000 0x0000000f 0x80010000 0x00000000 0x00010000>; + + /* Inbound 2GB range starting at 0 */ + dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x0 0x80000000>; + + /* This drives busses 80 to 0xbf */ + bus-range = <0x80 0xbf>; + + /* Legacy interrupts (note the weird polarity, the bridge seems + * to invert PCIe legacy interrupts). + * We are de-swizzling here because the numbers are actually for + * port of the root complex virtual P2P bridge. But I want + * to avoid putting a node for it in the tree, so the numbers + * below are basically de-swizzled numbers. + * The real slot is on idsel 0, so the swizzling is 1:1 + */ + interrupt-map-mask = <0x0 0x0 0x0 0x7>; + interrupt-map = < + 0x0 0x0 0x0 0x1 &UIC3 0x10 0x4 /* swizzled int A */ + 0x0 0x0 0x0 0x2 &UIC3 0x11 0x4 /* swizzled int B */ + 0x0 0x0 0x0 0x3 &UIC3 0x12 0x4 /* swizzled int C */ + 0x0 0x0 0x0 0x4 &UIC3 0x13 0x4 /* swizzled int D */>; + }; + + MSI: ppc4xx-msi@C10000000 { + compatible = "amcc,ppc4xx-msi", "ppc4xx-msi"; + reg = < 0xC 0x10000000 0x100>; + sdr-base = <0x36C>; + msi-data = <0x00000000>; + msi-mask = <0x44440000>; + interrupt-count = <3>; + interrupts = <0 1 2 3>; + interrupt-parent = <&UIC3>; + #interrupt-cells = <1>; + #address-cells = <0>; + #size-cells = <0>; + interrupt-map = <0 &UIC3 0x18 1 + 1 &UIC3 0x19 1 + 2 &UIC3 0x1A 1 + 3 &UIC3 0x1B 1>; + }; + }; +}; diff --git a/arch/powerpc/boot/dts/charon.dts b/arch/powerpc/boot/dts/charon.dts new file mode 100644 index 000000000..0e00e508e --- /dev/null +++ b/arch/powerpc/boot/dts/charon.dts @@ -0,0 +1,236 @@ +/* + * charon board Device Tree Source + * + * Copyright (C) 2007 Semihalf + * Marian Balakowicz <m8@semihalf.com> + * + * Copyright (C) 2010 DENX Software Engineering GmbH + * Heiko Schocher <hs@denx.de> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +/dts-v1/; + +/ { + model = "anon,charon"; + compatible = "anon,charon"; + #address-cells = <1>; + #size-cells = <1>; + interrupt-parent = <&mpc5200_pic>; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + PowerPC,5200@0 { + device_type = "cpu"; + reg = <0>; + d-cache-line-size = <32>; + i-cache-line-size = <32>; + d-cache-size = <0x4000>; // L1, 16K + i-cache-size = <0x4000>; // L1, 16K + timebase-frequency = <0>; // from bootloader + bus-frequency = <0>; // from bootloader + clock-frequency = <0>; // from bootloader + }; + }; + + memory { + device_type = "memory"; + reg = <0x00000000 0x08000000>; // 128MB + }; + + soc5200@f0000000 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,mpc5200-immr"; + ranges = <0 0xf0000000 0x0000c000>; + reg = <0xf0000000 0x00000100>; + bus-frequency = <0>; // from bootloader + system-frequency = <0>; // from bootloader + + cdm@200 { + compatible = "fsl,mpc5200-cdm"; + reg = <0x200 0x38>; + }; + + mpc5200_pic: interrupt-controller@500 { + // 5200 interrupts are encoded into two levels; + interrupt-controller; + #interrupt-cells = <3>; + compatible = "fsl,mpc5200-pic"; + reg = <0x500 0x80>; + }; + + timer@600 { // General Purpose Timer + compatible = "fsl,mpc5200-gpt"; + reg = <0x600 0x10>; + interrupts = <1 9 0>; + fsl,has-wdt; + }; + + can@900 { + compatible = "fsl,mpc5200-mscan"; + interrupts = <2 17 0>; + reg = <0x900 0x80>; + }; + + can@980 { + compatible = "fsl,mpc5200-mscan"; + interrupts = <2 18 0>; + reg = <0x980 0x80>; + }; + + gpio_simple: gpio@b00 { + compatible = "fsl,mpc5200-gpio"; + reg = <0xb00 0x40>; + interrupts = <1 7 0>; + gpio-controller; + #gpio-cells = <2>; + }; + + usb@1000 { + compatible = "fsl,mpc5200-ohci","ohci-be"; + reg = <0x1000 0xff>; + interrupts = <2 6 0>; + }; + + dma-controller@1200 { + device_type = "dma-controller"; + compatible = "fsl,mpc5200-bestcomm"; + reg = <0x1200 0x80>; + interrupts = <3 0 0 3 1 0 3 2 0 3 3 0 + 3 4 0 3 5 0 3 6 0 3 7 0 + 3 8 0 3 9 0 3 10 0 3 11 0 + 3 12 0 3 13 0 3 14 0 3 15 0>; + }; + + xlb@1f00 { + compatible = "fsl,mpc5200-xlb"; + reg = <0x1f00 0x100>; + }; + + serial@2000 { // PSC1 + compatible = "fsl,mpc5200-psc-uart"; + reg = <0x2000 0x100>; + interrupts = <2 1 0>; + }; + + serial@2400 { // PSC3 + compatible = "fsl,mpc5200-psc-uart"; + reg = <0x2400 0x100>; + interrupts = <2 3 0>; + }; + + ethernet@3000 { + compatible = "fsl,mpc5200-fec"; + reg = <0x3000 0x400>; + local-mac-address = [ 00 00 00 00 00 00 ]; + interrupts = <2 5 0>; + fixed-link = <1 1 100 0 0>; + }; + + mdio@3000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,mpc5200-mdio"; + reg = <0x3000 0x400>; // fec range, since we need to setup fec interrupts + interrupts = <2 5 0>; // these are for "mii command finished", not link changes & co. + }; + + ata@3a00 { + compatible = "fsl,mpc5200-ata"; + reg = <0x3a00 0x100>; + interrupts = <2 7 0>; + }; + + i2c@3d00 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,mpc5200-i2c","fsl-i2c"; + reg = <0x3d00 0x40>; + interrupts = <2 15 0>; + }; + + + i2c@3d40 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,mpc5200-i2c","fsl-i2c"; + reg = <0x3d40 0x40>; + interrupts = <2 16 0>; + + dtt@28 { + compatible = "national,lm80"; + reg = <0x28>; + }; + + rtc@68 { + compatible = "dallas,ds1374"; + reg = <0x68>; + }; + }; + + sram@8000 { + compatible = "fsl,mpc5200-sram"; + reg = <0x8000 0x4000>; + }; + }; + + localbus { + compatible = "fsl,mpc5200-lpb","simple-bus"; + #address-cells = <2>; + #size-cells = <1>; + ranges = < 0 0 0xfc000000 0x02000000 + 1 0 0xe0000000 0x04000000 // CS1 range, SM501 + 3 0 0xe8000000 0x00080000>; + + flash@0,0 { + compatible = "cfi-flash"; + reg = <0 0 0x02000000>; + bank-width = <4>; + device-width = <2>; + #size-cells = <1>; + #address-cells = <1>; + }; + + display@1,0 { + compatible = "smi,sm501"; + reg = <1 0x00000000 0x00800000 + 1 0x03e00000 0x00200000>; + mode = "640x480-32@60"; + interrupts = <1 1 3>; + little-endian; + }; + + mram0@3,0 { + compatible = "mtd-ram"; + reg = <3 0x00000 0x80000>; + bank-width = <1>; + }; + }; + + pci@f0000d00 { + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + device_type = "pci"; + compatible = "fsl,mpc5200-pci"; + reg = <0xf0000d00 0x100>; + interrupt-map-mask = <0xf800 0 0 7>; + interrupt-map = <0xc000 0 0 1 &mpc5200_pic 0 0 3 + 0xc000 0 0 2 &mpc5200_pic 0 0 3 + 0xc000 0 0 3 &mpc5200_pic 0 0 3 + 0xc000 0 0 4 &mpc5200_pic 0 0 3>; + clock-frequency = <0>; // From boot loader + interrupts = <2 8 0 2 9 0 2 10 0>; + bus-range = <0 0>; + ranges = <0x42000000 0 0x80000000 0x80000000 0 0x10000000 + 0x02000000 0 0x90000000 0x90000000 0 0x10000000 + 0x01000000 0 0x00000000 0xa0000000 0 0x01000000>; + }; +}; diff --git a/arch/powerpc/boot/dts/cm5200.dts b/arch/powerpc/boot/dts/cm5200.dts new file mode 100644 index 000000000..fb580dd84 --- /dev/null +++ b/arch/powerpc/boot/dts/cm5200.dts @@ -0,0 +1,89 @@ +/* + * CM5200 board Device Tree Source + * + * Copyright (C) 2007 Semihalf + * Marian Balakowicz <m8@semihalf.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +/include/ "mpc5200b.dtsi" + +&gpt0 { fsl,has-wdt; }; + +/ { + model = "schindler,cm5200"; + compatible = "schindler,cm5200"; + + soc5200@f0000000 { + can@900 { + status = "disabled"; + }; + + can@980 { + status = "disabled"; + }; + + psc@2000 { // PSC1 + compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart"; + }; + + psc@2200 { // PSC2 + compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart"; + }; + + psc@2400 { // PSC3 + compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart"; + }; + + psc@2600 { // PSC4 + status = "disabled"; + }; + + psc@2800 { // PSC5 + status = "disabled"; + }; + + psc@2c00 { // PSC6 + compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart"; + }; + + ethernet@3000 { + phy-handle = <&phy0>; + }; + + mdio@3000 { + phy0: ethernet-phy@0 { + reg = <0>; + }; + }; + + ata@3a00 { + status = "disabled"; + }; + + i2c@3d00 { + status = "disabled"; + }; + + }; + + pci@f0000d00 { + status = "disabled"; + }; + + localbus { + // 16-bit flash device at LocalPlus Bus CS0 + flash@0,0 { + compatible = "cfi-flash"; + reg = <0 0 0x2000000>; + bank-width = <2>; + device-width = <2>; + #size-cells = <1>; + #address-cells = <1>; + }; + }; +}; diff --git a/arch/powerpc/boot/dts/currituck.dts b/arch/powerpc/boot/dts/currituck.dts new file mode 100644 index 000000000..d2c8a8723 --- /dev/null +++ b/arch/powerpc/boot/dts/currituck.dts @@ -0,0 +1,242 @@ +/* + * Device Tree Source for IBM Embedded PPC 476 Platform + * + * Copyright © 2011 Tony Breeds IBM Corporation + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without + * any warranty of any kind, whether express or implied. + */ + +/dts-v1/; + +/memreserve/ 0x01f00000 0x00100000; // spin table + +/ { + #address-cells = <2>; + #size-cells = <2>; + model = "ibm,currituck"; + compatible = "ibm,currituck"; + dcr-parent = <&{/cpus/cpu@0}>; + + aliases { + serial0 = &UART0; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu@0 { + device_type = "cpu"; + model = "PowerPC,476"; + reg = <0>; + clock-frequency = <1600000000>; // 1.6 GHz + timebase-frequency = <100000000>; // 100Mhz + i-cache-line-size = <32>; + d-cache-line-size = <32>; + i-cache-size = <32768>; + d-cache-size = <32768>; + dcr-controller; + dcr-access-method = "native"; + status = "ok"; + }; + cpu@1 { + device_type = "cpu"; + model = "PowerPC,476"; + reg = <1>; + clock-frequency = <1600000000>; // 1.6 GHz + timebase-frequency = <100000000>; // 100Mhz + i-cache-line-size = <32>; + d-cache-line-size = <32>; + i-cache-size = <32768>; + d-cache-size = <32768>; + dcr-controller; + dcr-access-method = "native"; + status = "disabled"; + enable-method = "spin-table"; + cpu-release-addr = <0x0 0x01f00000>; + }; + }; + + memory { + device_type = "memory"; + reg = <0x0 0x0 0x0 0x0>; // filled in by zImage + }; + + MPIC: interrupt-controller { + compatible = "chrp,open-pic"; + interrupt-controller; + dcr-reg = <0xffc00000 0x00040000>; + #address-cells = <0>; + #size-cells = <0>; + #interrupt-cells = <2>; + + }; + + plb { + compatible = "ibm,plb6"; + #address-cells = <2>; + #size-cells = <2>; + ranges; + clock-frequency = <200000000>; // 200Mhz + + POB0: opb { + compatible = "ibm,opb-4xx", "ibm,opb"; + #address-cells = <1>; + #size-cells = <1>; + /* Wish there was a nicer way of specifying a full + * 32-bit range + */ + ranges = <0x00000000 0x00000200 0x00000000 0x80000000 + 0x80000000 0x00000200 0x80000000 0x80000000>; + clock-frequency = <100000000>; + + UART0: serial@10000000 { + device_type = "serial"; + compatible = "ns16750", "ns16550"; + reg = <0x10000000 0x00000008>; + virtual-reg = <0xe1000000>; + clock-frequency = <1851851>; // PCIe refclk/MCGC0_CTL[UART] + current-speed = <115200>; + interrupt-parent = <&MPIC>; + interrupts = <34 2>; + }; + + FPGA0: fpga@50000000 { + compatible = "ibm,currituck-fpga"; + reg = <0x50000000 0x4>; + }; + + IIC0: i2c@00000000 { + compatible = "ibm,iic-currituck", "ibm,iic"; + reg = <0x0 0x00000014>; + interrupt-parent = <&MPIC>; + interrupts = <79 2>; + #address-cells = <1>; + #size-cells = <0>; + rtc@68 { + compatible = "stm,m41t80", "m41st85"; + reg = <0x68>; + }; + }; + }; + + PCIE0: pciex@10100000000 { // 4xGBIF1 + device_type = "pci"; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + compatible = "ibm,plb-pciex-476fpe", "ibm,plb-pciex"; + primary; + port = <0x0>; /* port number */ + reg = <0x00000101 0x00000000 0x0 0x10000000 /* Config space access */ + 0x00000100 0x00000000 0x0 0x00001000>; /* UTL Registers space access */ + dcr-reg = <0x80 0x20>; + +// pci_space < pci_addr > < cpu_addr > < size > + ranges = <0x02000000 0x00000000 0x80000000 0x00000110 0x80000000 0x0 0x80000000 + 0x01000000 0x0 0x0 0x00000140 0x0 0x0 0x00010000>; + + /* Inbound starting at 0 to memsize filled in by zImage */ + dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x0 0x0>; + + /* This drives busses 0 to 0xf */ + bus-range = <0x0 0xf>; + + /* Legacy interrupts (note the weird polarity, the bridge seems + * to invert PCIe legacy interrupts). + * We are de-swizzling here because the numbers are actually for + * port of the root complex virtual P2P bridge. But I want + * to avoid putting a node for it in the tree, so the numbers + * below are basically de-swizzled numbers. + * The real slot is on idsel 0, so the swizzling is 1:1 + */ + interrupt-map-mask = <0x0 0x0 0x0 0x7>; + interrupt-map = < + 0x0 0x0 0x0 0x1 &MPIC 46 0x2 /* int A */ + 0x0 0x0 0x0 0x2 &MPIC 47 0x2 /* int B */ + 0x0 0x0 0x0 0x3 &MPIC 48 0x2 /* int C */ + 0x0 0x0 0x0 0x4 &MPIC 49 0x2 /* int D */>; + }; + + PCIE1: pciex@30100000000 { // 4xGBIF0 + device_type = "pci"; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + compatible = "ibm,plb-pciex-476fpe", "ibm,plb-pciex"; + primary; + port = <0x1>; /* port number */ + reg = <0x00000301 0x00000000 0x0 0x10000000 /* Config space access */ + 0x00000300 0x00000000 0x0 0x00001000>; /* UTL Registers space access */ + dcr-reg = <0x60 0x20>; + + ranges = <0x02000000 0x00000000 0x80000000 0x00000310 0x80000000 0x0 0x80000000 + 0x01000000 0x0 0x0 0x00000340 0x0 0x0 0x00010000>; + + /* Inbound starting at 0 to memsize filled in by zImage */ + dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x0 0x0>; + + /* This drives busses 0 to 0xf */ + bus-range = <0x0 0xf>; + + /* Legacy interrupts (note the weird polarity, the bridge seems + * to invert PCIe legacy interrupts). + * We are de-swizzling here because the numbers are actually for + * port of the root complex virtual P2P bridge. But I want + * to avoid putting a node for it in the tree, so the numbers + * below are basically de-swizzled numbers. + * The real slot is on idsel 0, so the swizzling is 1:1 + */ + interrupt-map-mask = <0x0 0x0 0x0 0x7>; + interrupt-map = < + 0x0 0x0 0x0 0x1 &MPIC 38 0x2 /* int A */ + 0x0 0x0 0x0 0x2 &MPIC 39 0x2 /* int B */ + 0x0 0x0 0x0 0x3 &MPIC 40 0x2 /* int C */ + 0x0 0x0 0x0 0x4 &MPIC 41 0x2 /* int D */>; + }; + + PCIE2: pciex@38100000000 { // 2xGBIF0 + device_type = "pci"; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + compatible = "ibm,plb-pciex-476fpe", "ibm,plb-pciex"; + primary; + port = <0x2>; /* port number */ + reg = <0x00000381 0x00000000 0x0 0x10000000 /* Config space access */ + 0x00000380 0x00000000 0x0 0x00001000>; /* UTL Registers space access */ + dcr-reg = <0xA0 0x20>; + + ranges = <0x02000000 0x00000000 0x80000000 0x00000390 0x80000000 0x0 0x80000000 + 0x01000000 0x0 0x0 0x000003C0 0x0 0x0 0x00010000>; + + /* Inbound starting at 0 to memsize filled in by zImage */ + dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x0 0x0>; + + /* This drives busses 0 to 0xf */ + bus-range = <0x0 0xf>; + + /* Legacy interrupts (note the weird polarity, the bridge seems + * to invert PCIe legacy interrupts). + * We are de-swizzling here because the numbers are actually for + * port of the root complex virtual P2P bridge. But I want + * to avoid putting a node for it in the tree, so the numbers + * below are basically de-swizzled numbers. + * The real slot is on idsel 0, so the swizzling is 1:1 + */ + interrupt-map-mask = <0x0 0x0 0x0 0x7>; + interrupt-map = < + 0x0 0x0 0x0 0x1 &MPIC 54 0x2 /* int A */ + 0x0 0x0 0x0 0x2 &MPIC 55 0x2 /* int B */ + 0x0 0x0 0x0 0x3 &MPIC 56 0x2 /* int C */ + 0x0 0x0 0x0 0x4 &MPIC 57 0x2 /* int D */>; + }; + + }; + + chosen { + linux,stdout-path = &UART0; + }; +}; diff --git a/arch/powerpc/boot/dts/digsy_mtc.dts b/arch/powerpc/boot/dts/digsy_mtc.dts new file mode 100644 index 000000000..955bff629 --- /dev/null +++ b/arch/powerpc/boot/dts/digsy_mtc.dts @@ -0,0 +1,161 @@ +/* + * Digsy MTC board Device Tree Source + * + * Copyright (C) 2009 Semihalf + * + * Based on the CM5200 by M. Balakowicz + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +/include/ "mpc5200b.dtsi" + +&gpt0 { gpio-controller; fsl,has-wdt; }; +&gpt1 { gpio-controller; }; + +/ { + model = "intercontrol,digsy-mtc"; + compatible = "intercontrol,digsy-mtc"; + + memory { + reg = <0x00000000 0x02000000>; // 32MB + }; + + soc5200@f0000000 { + rtc@800 { + status = "disabled"; + }; + + spi@f00 { + msp430@0 { + compatible = "spidev"; + spi-max-frequency = <32000>; + reg = <0>; + }; + }; + + psc@2000 { // PSC1 + status = "disabled"; + }; + + psc@2200 { // PSC2 + status = "disabled"; + }; + + psc@2400 { // PSC3 + status = "disabled"; + }; + + psc@2600 { // PSC4 + compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart"; + }; + + psc@2800 { // PSC5 + compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart"; + }; + + psc@2c00 { // PSC6 + status = "disabled"; + }; + + ethernet@3000 { + phy-handle = <&phy0>; + }; + + mdio@3000 { + phy0: ethernet-phy@0 { + reg = <0>; + }; + }; + + i2c@3d00 { + eeprom@50 { + compatible = "at,24c08"; + reg = <0x50>; + }; + + rtc@56 { + compatible = "mc,rv3029c2"; + reg = <0x56>; + }; + + rtc@68 { + compatible = "dallas,ds1339"; + reg = <0x68>; + }; + }; + + i2c@3d40 { + status = "disabled"; + }; + }; + + pci@f0000d00 { + interrupt-map-mask = <0xf800 0 0 7>; + interrupt-map = <0xc000 0 0 1 &mpc5200_pic 0 0 3 + 0xc000 0 0 2 &mpc5200_pic 0 0 3 + 0xc000 0 0 3 &mpc5200_pic 0 0 3 + 0xc000 0 0 4 &mpc5200_pic 0 0 3>; + clock-frequency = <0>; // From boot loader + interrupts = <2 8 0 2 9 0 2 10 0>; + bus-range = <0 0>; + ranges = <0x42000000 0 0x80000000 0x80000000 0 0x10000000 + 0x02000000 0 0x90000000 0x90000000 0 0x10000000 + 0x01000000 0 0x00000000 0xa0000000 0 0x01000000>; + }; + + localbus { + ranges = <0 0 0xff000000 0x1000000 + 4 0 0x60000000 0x0001000>; + + // 16-bit flash device at LocalPlus Bus CS0 + flash@0,0 { + compatible = "cfi-flash"; + reg = <0 0 0x1000000>; + bank-width = <2>; + device-width = <2>; + #size-cells = <1>; + #address-cells = <1>; + + partition@0 { + label = "kernel"; + reg = <0x0 0x00200000>; + }; + partition@200000 { + label = "root"; + reg = <0x00200000 0x00300000>; + }; + partition@500000 { + label = "user"; + reg = <0x00500000 0x00a00000>; + }; + partition@f00000 { + label = "u-boot"; + reg = <0x00f00000 0x100000>; + }; + }; + + can@4,0 { + compatible = "nxp,sja1000"; + reg = <4 0x000 0x80>; + nxp,external-clock-frequency = <24000000>; + interrupts = <1 2 3>; // Level-low + }; + + can@4,100 { + compatible = "nxp,sja1000"; + reg = <4 0x100 0x80>; + nxp,external-clock-frequency = <24000000>; + interrupts = <1 2 3>; // Level-low + }; + + serial@4,200 { + compatible = "nxp,sc28l92"; + reg = <4 0x200 0x10>; + interrupts = <1 3 3>; + }; + }; +}; diff --git a/arch/powerpc/boot/dts/ebony.dts b/arch/powerpc/boot/dts/ebony.dts new file mode 100644 index 000000000..ec2d14229 --- /dev/null +++ b/arch/powerpc/boot/dts/ebony.dts @@ -0,0 +1,337 @@ +/* + * Device Tree Source for IBM Ebony + * + * Copyright (c) 2006, 2007 IBM Corp. + * Josh Boyer <jwboyer@linux.vnet.ibm.com>, David Gibson <dwg@au1.ibm.com> + * + * FIXME: Draft only! + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without + * any warranty of any kind, whether express or implied. + */ + +/dts-v1/; + +/ { + #address-cells = <2>; + #size-cells = <1>; + model = "ibm,ebony"; + compatible = "ibm,ebony"; + dcr-parent = <&{/cpus/cpu@0}>; + + aliases { + ethernet0 = &EMAC0; + ethernet1 = &EMAC1; + serial0 = &UART0; + serial1 = &UART1; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu@0 { + device_type = "cpu"; + model = "PowerPC,440GP"; + reg = <0x00000000>; + clock-frequency = <0>; // Filled in by zImage + timebase-frequency = <0>; // Filled in by zImage + i-cache-line-size = <32>; + d-cache-line-size = <32>; + i-cache-size = <32768>; /* 32 kB */ + d-cache-size = <32768>; /* 32 kB */ + dcr-controller; + dcr-access-method = "native"; + }; + }; + + memory { + device_type = "memory"; + reg = <0x00000000 0x00000000 0x00000000>; // Filled in by zImage + }; + + UIC0: interrupt-controller0 { + compatible = "ibm,uic-440gp", "ibm,uic"; + interrupt-controller; + cell-index = <0>; + dcr-reg = <0x0c0 0x009>; + #address-cells = <0>; + #size-cells = <0>; + #interrupt-cells = <2>; + + }; + + UIC1: interrupt-controller1 { + compatible = "ibm,uic-440gp", "ibm,uic"; + interrupt-controller; + cell-index = <1>; + dcr-reg = <0x0d0 0x009>; + #address-cells = <0>; + #size-cells = <0>; + #interrupt-cells = <2>; + interrupts = <0x1e 0x4 0x1f 0x4>; /* cascade */ + interrupt-parent = <&UIC0>; + }; + + CPC0: cpc { + compatible = "ibm,cpc-440gp"; + dcr-reg = <0x0b0 0x003 0x0e0 0x010>; + // FIXME: anything else? + }; + + plb { + compatible = "ibm,plb-440gp", "ibm,plb4"; + #address-cells = <2>; + #size-cells = <1>; + ranges; + clock-frequency = <0>; // Filled in by zImage + + SDRAM0: memory-controller { + compatible = "ibm,sdram-440gp"; + dcr-reg = <0x010 0x002>; + // FIXME: anything else? + }; + + SRAM0: sram { + compatible = "ibm,sram-440gp"; + dcr-reg = <0x020 0x008 0x00a 0x001>; + }; + + DMA0: dma { + // FIXME: ??? + compatible = "ibm,dma-440gp"; + dcr-reg = <0x100 0x027>; + }; + + MAL0: mcmal { + compatible = "ibm,mcmal-440gp", "ibm,mcmal"; + dcr-reg = <0x180 0x062>; + num-tx-chans = <4>; + num-rx-chans = <4>; + interrupt-parent = <&MAL0>; + interrupts = <0x0 0x1 0x2 0x3 0x4>; + #interrupt-cells = <1>; + #address-cells = <0>; + #size-cells = <0>; + interrupt-map = </*TXEOB*/ 0x0 &UIC0 0xa 0x4 + /*RXEOB*/ 0x1 &UIC0 0xb 0x4 + /*SERR*/ 0x2 &UIC1 0x0 0x4 + /*TXDE*/ 0x3 &UIC1 0x1 0x4 + /*RXDE*/ 0x4 &UIC1 0x2 0x4>; + interrupt-map-mask = <0xffffffff>; + }; + + POB0: opb { + compatible = "ibm,opb-440gp", "ibm,opb"; + #address-cells = <1>; + #size-cells = <1>; + /* Wish there was a nicer way of specifying a full 32-bit + range */ + ranges = <0x00000000 0x00000001 0x00000000 0x80000000 + 0x80000000 0x00000001 0x80000000 0x80000000>; + dcr-reg = <0x090 0x00b>; + interrupt-parent = <&UIC1>; + interrupts = <0x7 0x4>; + clock-frequency = <0>; // Filled in by zImage + + EBC0: ebc { + compatible = "ibm,ebc-440gp", "ibm,ebc"; + dcr-reg = <0x012 0x002>; + #address-cells = <2>; + #size-cells = <1>; + clock-frequency = <0>; // Filled in by zImage + // ranges property is supplied by zImage + // based on firmware's configuration of the + // EBC bridge + interrupts = <0x5 0x4>; + interrupt-parent = <&UIC1>; + + small-flash@0,80000 { + compatible = "jedec-flash"; + bank-width = <1>; + reg = <0x00000000 0x00080000 0x00080000>; + #address-cells = <1>; + #size-cells = <1>; + partition@0 { + label = "OpenBIOS"; + reg = <0x00000000 0x00080000>; + read-only; + }; + }; + + nvram@1,0 { + /* NVRAM & RTC */ + compatible = "ds1743-nvram"; + #bytes = <0x2000>; + reg = <0x00000001 0x00000000 0x00002000>; + }; + + large-flash@2,0 { + compatible = "jedec-flash"; + bank-width = <1>; + reg = <0x00000002 0x00000000 0x00400000>; + #address-cells = <1>; + #size-cells = <1>; + partition@0 { + label = "fs"; + reg = <0x00000000 0x00380000>; + }; + partition@380000 { + label = "firmware"; + reg = <0x00380000 0x00080000>; + }; + }; + + ir@3,0 { + reg = <0x00000003 0x00000000 0x00000010>; + }; + + fpga@7,0 { + compatible = "Ebony-FPGA"; + reg = <0x00000007 0x00000000 0x00000010>; + virtual-reg = <0xe8300000>; + }; + }; + + UART0: serial@40000200 { + device_type = "serial"; + compatible = "ns16550"; + reg = <0x40000200 0x00000008>; + virtual-reg = <0xe0000200>; + clock-frequency = <11059200>; + current-speed = <9600>; + interrupt-parent = <&UIC0>; + interrupts = <0x0 0x4>; + }; + + UART1: serial@40000300 { + device_type = "serial"; + compatible = "ns16550"; + reg = <0x40000300 0x00000008>; + virtual-reg = <0xe0000300>; + clock-frequency = <11059200>; + current-speed = <9600>; + interrupt-parent = <&UIC0>; + interrupts = <0x1 0x4>; + }; + + IIC0: i2c@40000400 { + /* FIXME */ + compatible = "ibm,iic-440gp", "ibm,iic"; + reg = <0x40000400 0x00000014>; + interrupt-parent = <&UIC0>; + interrupts = <0x2 0x4>; + }; + IIC1: i2c@40000500 { + /* FIXME */ + compatible = "ibm,iic-440gp", "ibm,iic"; + reg = <0x40000500 0x00000014>; + interrupt-parent = <&UIC0>; + interrupts = <0x3 0x4>; + }; + + GPIO0: gpio@40000700 { + /* FIXME */ + compatible = "ibm,gpio-440gp"; + reg = <0x40000700 0x00000020>; + }; + + ZMII0: emac-zmii@40000780 { + compatible = "ibm,zmii-440gp", "ibm,zmii"; + reg = <0x40000780 0x0000000c>; + }; + + EMAC0: ethernet@40000800 { + device_type = "network"; + compatible = "ibm,emac-440gp", "ibm,emac"; + interrupt-parent = <&UIC1>; + interrupts = <0x1c 0x4 0x1d 0x4>; + reg = <0x40000800 0x00000070>; + local-mac-address = [000000000000]; // Filled in by zImage + mal-device = <&MAL0>; + mal-tx-channel = <0 1>; + mal-rx-channel = <0>; + cell-index = <0>; + max-frame-size = <1500>; + rx-fifo-size = <4096>; + tx-fifo-size = <2048>; + phy-mode = "rmii"; + phy-map = <0x00000001>; + zmii-device = <&ZMII0>; + zmii-channel = <0>; + }; + EMAC1: ethernet@40000900 { + device_type = "network"; + compatible = "ibm,emac-440gp", "ibm,emac"; + interrupt-parent = <&UIC1>; + interrupts = <0x1e 0x4 0x1f 0x4>; + reg = <0x40000900 0x00000070>; + local-mac-address = [000000000000]; // Filled in by zImage + mal-device = <&MAL0>; + mal-tx-channel = <2 3>; + mal-rx-channel = <1>; + cell-index = <1>; + max-frame-size = <1500>; + rx-fifo-size = <4096>; + tx-fifo-size = <2048>; + phy-mode = "rmii"; + phy-map = <0x00000001>; + zmii-device = <&ZMII0>; + zmii-channel = <1>; + }; + + + GPT0: gpt@40000a00 { + /* FIXME */ + reg = <0x40000a00 0x000000d4>; + interrupt-parent = <&UIC0>; + interrupts = <0x12 0x4 0x13 0x4 0x14 0x4 0x15 0x4 0x16 0x4>; + }; + + }; + + PCIX0: pci@20ec00000 { + device_type = "pci"; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + compatible = "ibm,plb440gp-pcix", "ibm,plb-pcix"; + primary; + reg = <0x00000002 0x0ec00000 0x00000008 /* Config space access */ + 0x00000000 0x00000000 0x00000000 /* no IACK cycles */ + 0x00000002 0x0ed00000 0x00000004 /* Special cycles */ + 0x00000002 0x0ec80000 0x000000f0 /* Internal registers */ + 0x00000002 0x0ec80100 0x000000fc>; /* Internal messaging registers */ + + /* Outbound ranges, one memory and one IO, + * later cannot be changed + */ + ranges = <0x02000000 0x00000000 0x80000000 0x00000003 0x80000000 0x00000000 0x80000000 + 0x01000000 0x00000000 0x00000000 0x00000002 0x08000000 0x00000000 0x00010000>; + + /* Inbound 2GB range starting at 0 */ + dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x0 0x80000000>; + + /* Ebony has all 4 IRQ pins tied together per slot */ + interrupt-map-mask = <0xf800 0x0 0x0 0x0>; + interrupt-map = < + /* IDSEL 1 */ + 0x800 0x0 0x0 0x0 &UIC0 0x17 0x8 + + /* IDSEL 2 */ + 0x1000 0x0 0x0 0x0 &UIC0 0x18 0x8 + + /* IDSEL 3 */ + 0x1800 0x0 0x0 0x0 &UIC0 0x19 0x8 + + /* IDSEL 4 */ + 0x2000 0x0 0x0 0x0 &UIC0 0x1a 0x8 + >; + }; + }; + + chosen { + linux,stdout-path = "/plb/opb/serial@40000200"; + }; +}; diff --git a/arch/powerpc/boot/dts/eiger.dts b/arch/powerpc/boot/dts/eiger.dts new file mode 100644 index 000000000..48bcf7187 --- /dev/null +++ b/arch/powerpc/boot/dts/eiger.dts @@ -0,0 +1,427 @@ +/* + * Device Tree Source for AMCC (AppliedMicro) Eiger(460SX) + * + * Copyright 2009 AMCC (AppliedMicro) <ttnguyen@amcc.com> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without + * any warranty of any kind, whether express or implied. + */ + +/dts-v1/; + +/ { + #address-cells = <2>; + #size-cells = <1>; + model = "amcc,eiger"; + compatible = "amcc,eiger"; + dcr-parent = <&{/cpus/cpu@0}>; + + aliases { + ethernet0 = &EMAC0; + ethernet1 = &EMAC1; + ethernet2 = &EMAC2; + ethernet3 = &EMAC3; + serial0 = &UART0; + serial1 = &UART1; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu@0 { + device_type = "cpu"; + model = "PowerPC,460SX"; + reg = <0x00000000>; + clock-frequency = <0>; /* Filled in by U-Boot */ + timebase-frequency = <0>; /* Filled in by U-Boot */ + i-cache-line-size = <32>; + d-cache-line-size = <32>; + i-cache-size = <32768>; + d-cache-size = <32768>; + dcr-controller; + dcr-access-method = "native"; + }; + }; + + memory { + device_type = "memory"; + reg = <0x00000000 0x00000000 0x00000000>; /* Filled in by U-Boot */ + }; + + UIC0: interrupt-controller0 { + compatible = "ibm,uic-460sx","ibm,uic"; + interrupt-controller; + cell-index = <0>; + dcr-reg = <0x0c0 0x009>; + #address-cells = <0>; + #size-cells = <0>; + #interrupt-cells = <2>; + }; + + UIC1: interrupt-controller1 { + compatible = "ibm,uic-460sx","ibm,uic"; + interrupt-controller; + cell-index = <1>; + dcr-reg = <0x0d0 0x009>; + #address-cells = <0>; + #size-cells = <0>; + #interrupt-cells = <2>; + interrupts = <0x1e 0x4 0x1f 0x4>; /* cascade */ + interrupt-parent = <&UIC0>; + }; + + UIC2: interrupt-controller2 { + compatible = "ibm,uic-460sx","ibm,uic"; + interrupt-controller; + cell-index = <2>; + dcr-reg = <0x0e0 0x009>; + #address-cells = <0>; + #size-cells = <0>; + #interrupt-cells = <2>; + interrupts = <0xa 0x4 0xb 0x4>; /* cascade */ + interrupt-parent = <&UIC0>; + }; + + UIC3: interrupt-controller3 { + compatible = "ibm,uic-460sx","ibm,uic"; + interrupt-controller; + cell-index = <3>; + dcr-reg = <0x0f0 0x009>; + #address-cells = <0>; + #size-cells = <0>; + #interrupt-cells = <2>; + interrupts = <0x10 0x4 0x11 0x4>; /* cascade */ + interrupt-parent = <&UIC0>; + }; + + SDR0: sdr { + compatible = "ibm,sdr-460sx"; + dcr-reg = <0x00e 0x002>; + }; + + CPR0: cpr { + compatible = "ibm,cpr-460sx"; + dcr-reg = <0x00c 0x002>; + }; + + plb { + compatible = "ibm,plb-460sx", "ibm,plb4"; + #address-cells = <2>; + #size-cells = <1>; + ranges; + clock-frequency = <0>; /* Filled in by U-Boot */ + + SDRAM0: sdram { + compatible = "ibm,sdram-460sx", "ibm,sdram-405gp"; + dcr-reg = <0x010 0x002>; + }; + + MAL0: mcmal { + compatible = "ibm,mcmal-460sx", "ibm,mcmal2"; + dcr-reg = <0x180 0x62>; + num-tx-chans = <4>; + num-rx-chans = <32>; + #address-cells = <1>; + #size-cells = <1>; + interrupt-parent = <&UIC1>; + interrupts = < /*TXEOB*/ 0x6 0x4 + /*RXEOB*/ 0x7 0x4 + /*SERR*/ 0x1 0x4 + /*TXDE*/ 0x2 0x4 + /*RXDE*/ 0x3 0x4 + /*COAL TX0*/ 0x18 0x2 + /*COAL TX1*/ 0x19 0x2 + /*COAL TX2*/ 0x1a 0x2 + /*COAL TX3*/ 0x1b 0x2 + /*COAL RX0*/ 0x1c 0x2 + /*COAL RX1*/ 0x1d 0x2 + /*COAL RX2*/ 0x1e 0x2 + /*COAL RX3*/ 0x1f 0x2>; + }; + + POB0: opb { + compatible = "ibm,opb-460sx", "ibm,opb"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0xb0000000 0x00000004 0xb0000000 0x50000000>; + clock-frequency = <0>; /* Filled in by U-Boot */ + + EBC0: ebc { + compatible = "ibm,ebc-460sx", "ibm,ebc"; + dcr-reg = <0x012 0x002>; + #address-cells = <2>; + #size-cells = <1>; + clock-frequency = <0>; /* Filled in by U-Boot */ + /* ranges property is supplied by U-Boot */ + interrupts = <0x6 0x4>; + interrupt-parent = <&UIC1>; + + nor_flash@0,0 { + compatible = "amd,s29gl512n", "cfi-flash"; + bank-width = <2>; + /* reg property is supplied in by U-Boot */ + #address-cells = <1>; + #size-cells = <1>; + partition@0 { + label = "kernel"; + reg = <0x00000000 0x001e0000>; + }; + partition@1e0000 { + label = "dtb"; + reg = <0x001e0000 0x00020000>; + }; + partition@200000 { + label = "ramdisk"; + reg = <0x00200000 0x01400000>; + }; + partition@1600000 { + label = "jffs2"; + reg = <0x01600000 0x00400000>; + }; + partition@1a00000 { + label = "user"; + reg = <0x01a00000 0x02560000>; + }; + partition@3f60000 { + label = "env"; + reg = <0x03f60000 0x00040000>; + }; + partition@3fa0000 { + label = "u-boot"; + reg = <0x03fa0000 0x00060000>; + }; + }; + + ndfc@1,0 { + compatible = "ibm,ndfc"; + /* reg property is supplied by U-boot */ + ccr = <0x00003000>; + bank-settings = <0x80002222>; + #address-cells = <1>; + #size-cells = <1>; + + nand { + #address-cells = <1>; + #size-cells = <1>; + partition@0 { + label = "uboot"; + reg = <0x00000000 0x00200000>; + }; + partition@200000 { + label = "uboot-environment"; + reg = <0x00200000 0x00100000>; + }; + partition@300000 { + label = "linux"; + reg = <0x00300000 0x00300000>; + }; + partition@600000 { + label = "root-file-system"; + reg = <0x00600000 0x01900000>; + }; + partition@1f00000 { + label = "device-tree"; + reg = <0x01f00000 0x00020000>; + }; + partition@1f20000 { + label = "data"; + reg = <0x01f20000 0x060E0000>; + }; + }; + }; + }; + + UART0: serial@ef600200 { + device_type = "serial"; + compatible = "ns16550"; + reg = <0xef600200 0x00000008>; + virtual-reg = <0xef600200>; + clock-frequency = <0>; /* Filled in by U-Boot */ + current-speed = <0>; /* Filled in by U-Boot */ + interrupt-parent = <&UIC0>; + interrupts = <0x0 0x4>; + }; + + UART1: serial@ef600300 { + device_type = "serial"; + compatible = "ns16550"; + reg = <0xef600300 0x00000008>; + virtual-reg = <0xef600300>; + clock-frequency = <0>; /* Filled in by U-Boot */ + current-speed = <0>; /* Filled in by U-Boot */ + interrupt-parent = <&UIC0>; + interrupts = <0x1 0x4>; + }; + + IIC0: i2c@ef600400 { + compatible = "ibm,iic-460sx", "ibm,iic"; + reg = <0xef600400 0x00000014>; + interrupt-parent = <&UIC0>; + interrupts = <0x2 0x4>; + #address-cells = <1>; + #size-cells = <0>; + index = <0>; + }; + + IIC1: i2c@ef600500 { + compatible = "ibm,iic-460sx", "ibm,iic"; + reg = <0xef600500 0x00000014>; + interrupt-parent = <&UIC0>; + interrupts = <0x3 0x4>; + #address-cells = <1>; + #size-cells = <0>; + index = <1>; + }; + + RGMII0: emac-rgmii@ef600900 { + compatible = "ibm,rgmii-460sx", "ibm,rgmii"; + reg = <0xef600900 0x00000008>; + has-mdio; + }; + + RGMII1: emac-rgmii@ef600920 { + compatible = "ibm,rgmii-460sx", "ibm,rgmii"; + reg = <0xef600920 0x00000008>; + has-mdio; + }; + + TAH0: emac-tah@ef600e50 { + compatible = "ibm,tah-460sx", "ibm,tah"; + reg = <0xef600e50 0x00000030>; + }; + + TAH1: emac-tah@ef600f50 { + compatible = "ibm,tah-460sx", "ibm,tah"; + reg = <0xef600f50 0x00000030>; + }; + + EMAC0: ethernet@ef600a00 { + device_type = "network"; + compatible = "ibm,emac-460sx", "ibm,emac4"; + interrupt-parent = <&EMAC0>; + interrupts = <0x0 0x1>; + #interrupt-cells = <1>; + #address-cells = <0>; + #size-cells = <0>; + interrupt-map = </*Status*/ 0x0 &UIC0 0x13 0x4 + /*Wake*/ 0x1 &UIC2 0x1d 0x4>; + reg = <0xef600a00 0x00000070>; + local-mac-address = [000000000000]; /* Filled in by U-Boot */ + mal-device = <&MAL0>; + mal-tx-channel = <0>; + mal-rx-channel = <0>; + cell-index = <0>; + max-frame-size = <9000>; + rx-fifo-size = <4096>; + tx-fifo-size = <2048>; + rx-fifo-size-gige = <16384>; + phy-mode = "rgmii"; + phy-map = <0x00000000>; + rgmii-device = <&RGMII0>; + rgmii-channel = <0>; + tah-device = <&TAH0>; + tah-channel = <0>; + has-inverted-stacr-oc; + has-new-stacr-staopc; + }; + + EMAC1: ethernet@ef600b00 { + device_type = "network"; + compatible = "ibm,emac-460sx", "ibm,emac4"; + interrupt-parent = <&EMAC1>; + interrupts = <0x0 0x1>; + #interrupt-cells = <1>; + #address-cells = <0>; + #size-cells = <0>; + interrupt-map = </*Status*/ 0x0 &UIC0 0x14 0x4 + /*Wake*/ 0x1 &UIC2 0x1d 0x4>; + reg = <0xef600b00 0x00000070>; + local-mac-address = [000000000000]; /* Filled in by U-Boot */ + mal-device = <&MAL0>; + mal-tx-channel = <1>; + mal-rx-channel = <8>; + cell-index = <1>; + max-frame-size = <9000>; + rx-fifo-size = <4096>; + tx-fifo-size = <2048>; + rx-fifo-size-gige = <16384>; + phy-mode = "rgmii"; + phy-map = <0x00000000>; + rgmii-device = <&RGMII0>; + rgmii-channel = <1>; + tah-device = <&TAH1>; + tah-channel = <1>; + has-inverted-stacr-oc; + has-new-stacr-staopc; + mdio-device = <&EMAC0>; + }; + + EMAC2: ethernet@ef600c00 { + device_type = "network"; + compatible = "ibm,emac-460sx", "ibm,emac4"; + interrupt-parent = <&EMAC2>; + interrupts = <0x0 0x1>; + #interrupt-cells = <1>; + #address-cells = <0>; + #size-cells = <0>; + interrupt-map = </*Status*/ 0x0 &UIC0 0x15 0x4 + /*Wake*/ 0x1 &UIC2 0x1d 0x4>; + reg = <0xef600c00 0x00000070>; + local-mac-address = [000000000000]; /* Filled in by U-Boot */ + mal-device = <&MAL0>; + mal-tx-channel = <2>; + mal-rx-channel = <16>; + cell-index = <2>; + max-frame-size = <9000>; + rx-fifo-size = <4096>; + tx-fifo-size = <2048>; + rx-fifo-size-gige = <16384>; + tx-fifo-size-gige = <16384>; /* emac2&3 only */ + phy-mode = "rgmii"; + phy-map = <0x00000000>; + rgmii-device = <&RGMII1>; + rgmii-channel = <0>; + has-inverted-stacr-oc; + has-new-stacr-staopc; + mdio-device = <&EMAC0>; + }; + + EMAC3: ethernet@ef600d00 { + device_type = "network"; + compatible = "ibm,emac-460sx", "ibm,emac4"; + interrupt-parent = <&EMAC3>; + interrupts = <0x0 0x1>; + #interrupt-cells = <1>; + #address-cells = <0>; + #size-cells = <0>; + interrupt-map = </*Status*/ 0x0 &UIC0 0x16 0x4 + /*Wake*/ 0x1 &UIC2 0x1d 0x4>; + reg = <0xef600d00 0x00000070>; + local-mac-address = [000000000000]; /* Filled in by U-Boot */ + mal-device = <&MAL0>; + mal-tx-channel = <3>; + mal-rx-channel = <24>; + cell-index = <3>; + max-frame-size = <9000>; + rx-fifo-size = <4096>; + tx-fifo-size = <2048>; + rx-fifo-size-gige = <16384>; + tx-fifo-size-gige = <16384>; /* emac2&3 only */ + phy-mode = "rgmii"; + phy-map = <0x00000000>; + rgmii-device = <&RGMII1>; + rgmii-channel = <1>; + has-inverted-stacr-oc; + has-new-stacr-staopc; + mdio-device = <&EMAC0>; + }; + }; + + }; + chosen { + linux,stdout-path = "/plb/opb/serial@ef600200"; + }; + +}; diff --git a/arch/powerpc/boot/dts/ep405.dts b/arch/powerpc/boot/dts/ep405.dts new file mode 100644 index 000000000..53ef06cc2 --- /dev/null +++ b/arch/powerpc/boot/dts/ep405.dts @@ -0,0 +1,230 @@ +/* + * Device Tree Source for EP405 + * + * Copyright 2007 IBM Corp. + * Benjamin Herrenschmidt <benh@kernel.crashing.org> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without + * any warranty of any kind, whether express or implied. + */ + +/dts-v1/; + +/ { + #address-cells = <1>; + #size-cells = <1>; + model = "ep405"; + compatible = "ep405"; + dcr-parent = <&{/cpus/cpu@0}>; + + aliases { + ethernet0 = &EMAC; + serial0 = &UART0; + serial1 = &UART1; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu@0 { + device_type = "cpu"; + model = "PowerPC,405GP"; + reg = <0x00000000>; + clock-frequency = <200000000>; /* Filled in by zImage */ + timebase-frequency = <0>; /* Filled in by zImage */ + i-cache-line-size = <32>; + d-cache-line-size = <32>; + i-cache-size = <16384>; + d-cache-size = <16384>; + dcr-controller; + dcr-access-method = "native"; + }; + }; + + memory { + device_type = "memory"; + reg = <0x00000000 0x00000000>; /* Filled in by zImage */ + }; + + UIC0: interrupt-controller { + compatible = "ibm,uic"; + interrupt-controller; + cell-index = <0>; + dcr-reg = <0x0c0 0x009>; + #address-cells = <0>; + #size-cells = <0>; + #interrupt-cells = <2>; + }; + + plb { + compatible = "ibm,plb3"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + clock-frequency = <0>; /* Filled in by zImage */ + + SDRAM0: memory-controller { + compatible = "ibm,sdram-405gp"; + dcr-reg = <0x010 0x002>; + }; + + MAL: mcmal { + compatible = "ibm,mcmal-405gp", "ibm,mcmal"; + dcr-reg = <0x180 0x062>; + num-tx-chans = <1>; + num-rx-chans = <1>; + interrupt-parent = <&UIC0>; + interrupts = < + 0xb 0x4 /* TXEOB */ + 0xc 0x4 /* RXEOB */ + 0xa 0x4 /* SERR */ + 0xd 0x4 /* TXDE */ + 0xe 0x4 /* RXDE */>; + }; + + POB0: opb { + compatible = "ibm,opb-405gp", "ibm,opb"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0xef600000 0xef600000 0x00a00000>; + dcr-reg = <0x0a0 0x005>; + clock-frequency = <0>; /* Filled in by zImage */ + + UART0: serial@ef600300 { + device_type = "serial"; + compatible = "ns16550"; + reg = <0xef600300 0x00000008>; + virtual-reg = <0xef600300>; + clock-frequency = <0>; /* Filled in by zImage */ + current-speed = <9600>; + interrupt-parent = <&UIC0>; + interrupts = <0x0 0x4>; + }; + + UART1: serial@ef600400 { + device_type = "serial"; + compatible = "ns16550"; + reg = <0xef600400 0x00000008>; + virtual-reg = <0xef600400>; + clock-frequency = <0>; /* Filled in by zImage */ + current-speed = <9600>; + interrupt-parent = <&UIC0>; + interrupts = <0x1 0x4>; + }; + + IIC: i2c@ef600500 { + compatible = "ibm,iic-405gp", "ibm,iic"; + reg = <0xef600500 0x00000011>; + interrupt-parent = <&UIC0>; + interrupts = <0x2 0x4>; + }; + + GPIO: gpio@ef600700 { + compatible = "ibm,gpio-405gp"; + reg = <0xef600700 0x00000020>; + }; + + EMAC: ethernet@ef600800 { + linux,network-index = <0x0>; + device_type = "network"; + compatible = "ibm,emac-405gp", "ibm,emac"; + interrupt-parent = <&UIC0>; + interrupts = < + 0xf 0x4 /* Ethernet */ + 0x9 0x4 /* Ethernet Wake Up */>; + local-mac-address = [000000000000]; /* Filled in by zImage */ + reg = <0xef600800 0x00000070>; + mal-device = <&MAL>; + mal-tx-channel = <0>; + mal-rx-channel = <0>; + cell-index = <0>; + max-frame-size = <1500>; + rx-fifo-size = <4096>; + tx-fifo-size = <2048>; + phy-mode = "rmii"; + phy-map = <0x00000000>; + }; + + }; + + EBC0: ebc { + compatible = "ibm,ebc-405gp", "ibm,ebc"; + dcr-reg = <0x012 0x002>; + #address-cells = <2>; + #size-cells = <1>; + + + /* The ranges property is supplied by the bootwrapper + * and is based on the firmware's configuration of the + * EBC bridge + */ + clock-frequency = <0>; /* Filled in by zImage */ + + /* NVRAM and RTC */ + nvrtc@4,200000 { + compatible = "ds1742"; + reg = <0x00000004 0x00200000 0x00000000>; /* size fixed up by zImage */ + }; + + /* "BCSR" CPLD contains a PCI irq controller */ + bcsr@4,0 { + compatible = "ep405-bcsr"; + reg = <0x00000004 0x00000000 0x00000010>; + interrupt-controller; + /* Routing table */ + irq-routing = [ 00 /* SYSERR */ + 01 /* STTM */ + 01 /* RTC */ + 01 /* FENET */ + 02 /* NB PCIIRQ mux ? */ + 03 /* SB Winbond 8259 ? */ + 04 /* Serial Ring */ + 05 /* USB (ep405pc) */ + 06 /* XIRQ 0 */ + 06 /* XIRQ 1 */ + 06 /* XIRQ 2 */ + 06 /* XIRQ 3 */ + 06 /* XIRQ 4 */ + 06 /* XIRQ 5 */ + 06 /* XIRQ 6 */ + 07]; /* Reserved */ + }; + }; + + PCI0: pci@ec000000 { + device_type = "pci"; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + compatible = "ibm,plb405gp-pci", "ibm,plb-pci"; + primary; + reg = <0xeec00000 0x00000008 /* Config space access */ + 0xeed80000 0x00000004 /* IACK */ + 0xeed80000 0x00000004 /* Special cycle */ + 0xef480000 0x00000040>; /* Internal registers */ + + /* Outbound ranges, one memory and one IO, + * later cannot be changed. Chip supports a second + * IO range but we don't use it for now + */ + ranges = <0x02000000 0x00000000 0x80000000 0x80000000 0x00000000 0x20000000 + 0x01000000 0x00000000 0x00000000 0xe8000000 0x00000000 0x00010000>; + + /* Inbound 2GB range starting at 0 */ + dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x80000000>; + + /* That's all I know about IRQs on that thing ... */ + interrupt-map-mask = <0xf800 0x0 0x0 0x0>; + interrupt-map = < + /* USB */ + 0x7000 0x0 0x0 0x0 &UIC0 0x1e 0x8 /* IRQ5 */ + >; + }; + }; + + chosen { + linux,stdout-path = "/plb/opb/serial@ef600300"; + }; +}; diff --git a/arch/powerpc/boot/dts/ep8248e.dts b/arch/powerpc/boot/dts/ep8248e.dts new file mode 100644 index 000000000..8b3a49f34 --- /dev/null +++ b/arch/powerpc/boot/dts/ep8248e.dts @@ -0,0 +1,203 @@ +/* + * Device Tree for the Embedded Planet EP8248E board running PlanetCore. + * + * Copyright 2007 Freescale Semiconductor Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +/dts-v1/; +/ { + model = "EP8248E"; + compatible = "fsl,ep8248e"; + #address-cells = <1>; + #size-cells = <1>; + + aliases { + planetcore-SMC1 = &smc1; + planetcore-SCC1 = &scc1; + ethernet0 = ð0; + ethernet1 = ð1; + serial0 = &smc1; + serial1 = &scc1; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + PowerPC,8248@0 { + device_type = "cpu"; + reg = <0>; + d-cache-line-size = <32>; + i-cache-line-size = <32>; + d-cache-size = <16384>; + i-cache-size = <16384>; + timebase-frequency = <0>; + clock-frequency = <0>; + }; + }; + + localbus@f0010100 { + compatible = "fsl,mpc8248-localbus", + "fsl,pq2-localbus", + "simple-bus"; + #address-cells = <2>; + #size-cells = <1>; + reg = <0xf0010100 0x40>; + + ranges = <0 0 0xfc000000 0x04000000 + 1 0 0xfa000000 0x00008000>; + + flash@0,3800000 { + compatible = "cfi-flash"; + reg = <0 0x3800000 0x800000>; + bank-width = <4>; + device-width = <2>; + }; + + bcsr@1,0 { + #address-cells = <2>; + #size-cells = <1>; + reg = <1 0 0x10>; + compatible = "fsl,ep8248e-bcsr"; + ranges; + + mdio { + compatible = "fsl,ep8248e-mdio-bitbang"; + #address-cells = <1>; + #size-cells = <0>; + reg = <1 8 1>; + + PHY0: ethernet-phy@0 { + interrupt-parent = <&PIC>; + reg = <0>; + }; + + PHY1: ethernet-phy@1 { + interrupt-parent = <&PIC>; + reg = <1>; + }; + }; + }; + }; + + memory { + device_type = "memory"; + reg = <0 0>; + }; + + soc@f0000000 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,mpc8248-immr", "fsl,pq2-soc", "simple-bus"; + ranges = <0x00000000 0xf0000000 0x00053000>; + + // Temporary until code stops depending on it. + device_type = "soc"; + + // Temporary -- will go away once kernel uses ranges for get_immrbase(). + reg = <0xf0000000 0x00053000>; + + cpm@119c0 { + #address-cells = <1>; + #size-cells = <1>; + #interrupt-cells = <2>; + compatible = "fsl,mpc8248-cpm", "fsl,cpm2", + "simple-bus"; + reg = <0x119c0 0x30>; + ranges; + + muram { + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0 0x10000>; + + data@0 { + compatible = "fsl,cpm-muram-data"; + reg = <0 0x2000 0x9800 0x800>; + }; + }; + + brg@119f0 { + compatible = "fsl,mpc8248-brg", + "fsl,cpm2-brg", + "fsl,cpm-brg"; + reg = <0x119f0 0x10 0x115f0 0x10>; + }; + + /* Monitor port/SMC1 */ + smc1: serial@11a80 { + device_type = "serial"; + compatible = "fsl,mpc8248-smc-uart", + "fsl,cpm2-smc-uart"; + reg = <0x11a80 0x20 0x87fc 2>; + interrupts = <4 8>; + interrupt-parent = <&PIC>; + fsl,cpm-brg = <7>; + fsl,cpm-command = <0x1d000000>; + linux,planetcore-label = "SMC1"; + }; + + /* "Serial" port/SCC1 */ + scc1: serial@11a00 { + device_type = "serial"; + compatible = "fsl,mpc8248-scc-uart", + "fsl,cpm2-scc-uart"; + reg = <0x11a00 0x20 0x8000 0x100>; + interrupts = <40 8>; + interrupt-parent = <&PIC>; + fsl,cpm-brg = <1>; + fsl,cpm-command = <0x00800000>; + linux,planetcore-label = "SCC1"; + }; + + eth0: ethernet@11300 { + device_type = "network"; + compatible = "fsl,mpc8248-fcc-enet", + "fsl,cpm2-fcc-enet"; + reg = <0x11300 0x20 0x8400 0x100 0x11390 1>; + local-mac-address = [ 00 00 00 00 00 00 ]; + interrupts = <32 8>; + interrupt-parent = <&PIC>; + phy-handle = <&PHY0>; + linux,network-index = <0>; + fsl,cpm-command = <0x12000300>; + }; + + eth1: ethernet@11320 { + device_type = "network"; + compatible = "fsl,mpc8248-fcc-enet", + "fsl,cpm2-fcc-enet"; + reg = <0x11320 0x20 0x8500 0x100 0x113b0 1>; + local-mac-address = [ 00 00 00 00 00 00 ]; + interrupts = <33 8>; + interrupt-parent = <&PIC>; + phy-handle = <&PHY1>; + linux,network-index = <1>; + fsl,cpm-command = <0x16200300>; + }; + + usb@11b60 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,mpc8248-usb", + "fsl,cpm2-usb"; + reg = <0x11b60 0x18 0x8b00 0x100>; + interrupt-parent = <&PIC>; + interrupts = <11 8>; + fsl,cpm-command = <0x2e600000>; + }; + }; + + PIC: interrupt-controller@10c00 { + #interrupt-cells = <2>; + interrupt-controller; + reg = <0x10c00 0x80>; + compatible = "fsl,mpc8248-pic", "fsl,pq2-pic"; + }; + }; +}; diff --git a/arch/powerpc/boot/dts/ep88xc.dts b/arch/powerpc/boot/dts/ep88xc.dts new file mode 100644 index 000000000..2aa5bf559 --- /dev/null +++ b/arch/powerpc/boot/dts/ep88xc.dts @@ -0,0 +1,213 @@ +/* + * EP88xC Device Tree Source + * + * Copyright 2006 MontaVista Software, Inc. + * Copyright 2007,2008 Freescale Semiconductor, Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +/dts-v1/; + +/ { + model = "EP88xC"; + compatible = "fsl,ep88xc"; + #address-cells = <1>; + #size-cells = <1>; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + PowerPC,885@0 { + device_type = "cpu"; + reg = <0x0>; + d-cache-line-size = <16>; + i-cache-line-size = <16>; + d-cache-size = <8192>; + i-cache-size = <8192>; + timebase-frequency = <0>; + bus-frequency = <0>; + clock-frequency = <0>; + interrupts = <15 2>; // decrementer interrupt + interrupt-parent = <&PIC>; + }; + }; + + memory { + device_type = "memory"; + reg = <0x0 0x0>; + }; + + localbus@fa200100 { + compatible = "fsl,mpc885-localbus", "fsl,pq1-localbus"; + #address-cells = <2>; + #size-cells = <1>; + reg = <0xfa200100 0x40>; + + ranges = < + 0x0 0x0 0xfc000000 0x4000000 + 0x3 0x0 0xfa000000 0x1000000 + >; + + flash@0,2000000 { + compatible = "cfi-flash"; + reg = <0x0 0x2000000 0x2000000>; + bank-width = <4>; + device-width = <2>; + }; + + board-control@3,400000 { + reg = <0x3 0x400000 0x10>; + compatible = "fsl,ep88xc-bcsr"; + }; + }; + + soc@fa200000 { + compatible = "fsl,mpc885", "fsl,pq1-soc"; + #address-cells = <1>; + #size-cells = <1>; + device_type = "soc"; + ranges = <0x0 0xfa200000 0x4000>; + bus-frequency = <0>; + + // Temporary -- will go away once kernel uses ranges for get_immrbase(). + reg = <0xfa200000 0x4000>; + + mdio@e00 { + compatible = "fsl,mpc885-fec-mdio", "fsl,pq1-fec-mdio"; + reg = <0xe00 0x188>; + #address-cells = <1>; + #size-cells = <0>; + + PHY0: ethernet-phy@0 { + reg = <0x0>; + }; + + PHY1: ethernet-phy@1 { + reg = <0x1>; + }; + }; + + ethernet@e00 { + device_type = "network"; + compatible = "fsl,mpc885-fec-enet", + "fsl,pq1-fec-enet"; + reg = <0xe00 0x188>; + local-mac-address = [ 00 00 00 00 00 00 ]; + interrupts = <3 1>; + interrupt-parent = <&PIC>; + phy-handle = <&PHY0>; + linux,network-index = <0>; + }; + + ethernet@1e00 { + device_type = "network"; + compatible = "fsl,mpc885-fec-enet", + "fsl,pq1-fec-enet"; + reg = <0x1e00 0x188>; + local-mac-address = [ 00 00 00 00 00 00 ]; + interrupts = <7 1>; + interrupt-parent = <&PIC>; + phy-handle = <&PHY1>; + linux,network-index = <1>; + }; + + PIC: interrupt-controller@0 { + interrupt-controller; + #interrupt-cells = <2>; + reg = <0x0 0x24>; + compatible = "fsl,mpc885-pic", "fsl,pq1-pic"; + }; + + pcmcia@80 { + #address-cells = <3>; + #interrupt-cells = <1>; + #size-cells = <2>; + compatible = "fsl,pq-pcmcia"; + device_type = "pcmcia"; + reg = <0x80 0x80>; + interrupt-parent = <&PIC>; + interrupts = <13 1>; + }; + + cpm@9c0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,mpc885-cpm", "fsl,cpm1"; + command-proc = <0x9c0>; + interrupts = <0>; // cpm error interrupt + interrupt-parent = <&CPM_PIC>; + reg = <0x9c0 0x40>; + ranges; + + muram@2000 { + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x2000 0x2000>; + + data@0 { + compatible = "fsl,cpm-muram-data"; + reg = <0x0 0x1c00>; + }; + }; + + brg@9f0 { + compatible = "fsl,mpc885-brg", + "fsl,cpm1-brg", + "fsl,cpm-brg"; + reg = <0x9f0 0x10>; + }; + + CPM_PIC: interrupt-controller@930 { + interrupt-controller; + #interrupt-cells = <1>; + interrupts = <5 2 0 2>; + interrupt-parent = <&PIC>; + reg = <0x930 0x20>; + compatible = "fsl,mpc885-cpm-pic", + "fsl,cpm1-pic"; + }; + + // MON-1 + serial@a80 { + device_type = "serial"; + compatible = "fsl,mpc885-smc-uart", + "fsl,cpm1-smc-uart"; + reg = <0xa80 0x10 0x3e80 0x40>; + interrupts = <4>; + interrupt-parent = <&CPM_PIC>; + fsl,cpm-brg = <1>; + fsl,cpm-command = <0x90>; + linux,planetcore-label = "SMC1"; + }; + + // SER-1 + serial@a20 { + device_type = "serial"; + compatible = "fsl,mpc885-scc-uart", + "fsl,cpm1-scc-uart"; + reg = <0xa20 0x20 0x3d00 0x80>; + interrupts = <29>; + interrupt-parent = <&CPM_PIC>; + fsl,cpm-brg = <2>; + fsl,cpm-command = <0x40>; + linux,planetcore-label = "SCC2"; + }; + + usb@a00 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,mpc885-usb", + "fsl,cpm1-usb"; + reg = <0xa00 0x18 0x1c00 0x80>; + interrupt-parent = <&CPM_PIC>; + interrupts = <30>; + fsl,cpm-command = <0000>; + }; + }; + }; +}; diff --git a/arch/powerpc/boot/dts/fsl/b4420si-post.dtsi b/arch/powerpc/boot/dts/fsl/b4420si-post.dtsi new file mode 100644 index 000000000..86161ae6c --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/b4420si-post.dtsi @@ -0,0 +1,106 @@ +/* + * B4420 Silicon/SoC Device Tree Source (post include) + * + * Copyright 2012 Freescale Semiconductor, Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * This software is provided by Freescale Semiconductor "as is" and any + * express or implied warranties, including, but not limited to, the implied + * warranties of merchantability and fitness for a particular purpose are + * disclaimed. In no event shall Freescale Semiconductor be liable for any + * direct, indirect, incidental, special, exemplary, or consequential damages + * (including, but not limited to, procurement of substitute goods or services; + * loss of use, data, or profits; or business interruption) however caused and + * on any theory of liability, whether in contract, strict liability, or tort + * (including negligence or otherwise) arising in any way out of the use of + * this software, even if advised of the possibility of such damage. + */ + +/include/ "b4si-post.dtsi" + +/* controller at 0x200000 */ +&pci0 { + compatible = "fsl,b4420-pcie", "fsl,qoriq-pcie-v2.4"; +}; + +&dcsr { + dcsr-epu@0 { + compatible = "fsl,b4420-dcsr-epu", "fsl,dcsr-epu"; + }; + dcsr-npc { + compatible = "fsl,b4420-dcsr-cnpc", "fsl,dcsr-cnpc"; + }; + dcsr-dpaa@9000 { + compatible = "fsl,b4420-dcsr-dpaa", "fsl,dcsr-dpaa"; + }; + dcsr-ocn@11000 { + compatible = "fsl,b4420-dcsr-ocn", "fsl,dcsr-ocn"; + }; + dcsr-nal@18000 { + compatible = "fsl,b4420-dcsr-nal", "fsl,dcsr-nal"; + }; + dcsr-rcpm@22000 { + compatible = "fsl,b4420-dcsr-rcpm", "fsl,dcsr-rcpm"; + }; + dcsr-snpc@30000 { + compatible = "fsl,b4420-dcsr-snpc", "fsl,dcsr-snpc"; + }; + dcsr-snpc@31000 { + compatible = "fsl,b4420-dcsr-snpc", "fsl,dcsr-snpc"; + }; + dcsr-cpu-sb-proxy@108000 { + compatible = "fsl,dcsr-e6500-sb-proxy", "fsl,dcsr-cpu-sb-proxy"; + cpu-handle = <&cpu1>; + reg = <0x108000 0x1000 0x109000 0x1000>; + }; +}; + +&soc { + cpc: l3-cache-controller@10000 { + compatible = "fsl,b4420-l3-cache-controller", "cache"; + }; + + guts: global-utilities@e0000 { + compatible = "fsl,b4420-device-config", "fsl,qoriq-device-config-2.0"; + }; + +/include/ "qoriq-clockgen2.dtsi" + global-utilities@e1000 { + compatible = "fsl,b4420-clockgen", "fsl,qoriq-clockgen-2.0"; + + mux0: mux0@0 { + #clock-cells = <0>; + reg = <0x0 0x4>; + compatible = "fsl,qoriq-core-mux-2.0"; + clocks = <&pll0 0>, <&pll0 1>, <&pll0 2>, + <&pll1 0>, <&pll1 1>, <&pll1 2>; + clock-names = "pll0", "pll0-div2", "pll0-div4", + "pll1", "pll1-div2", "pll1-div4"; + clock-output-names = "cmux0"; + }; + }; + + rcpm: global-utilities@e2000 { + compatible = "fsl,b4420-rcpm", "fsl,qoriq-rcpm-2.0"; + }; + + L2: l2-cache-controller@c20000 { + compatible = "fsl,b4420-l2-cache-controller"; + }; +}; diff --git a/arch/powerpc/boot/dts/fsl/b4420si-pre.dtsi b/arch/powerpc/boot/dts/fsl/b4420si-pre.dtsi new file mode 100644 index 000000000..338af7e39 --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/b4420si-pre.dtsi @@ -0,0 +1,79 @@ +/* + * B4420 Silicon/SoC Device Tree Source (pre include) + * + * Copyright 2012 Freescale Semiconductor, Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * This software is provided by Freescale Semiconductor "as is" and any + * express or implied warranties, including, but not limited to, the implied + * warranties of merchantability and fitness for a particular purpose are + * disclaimed. In no event shall Freescale Semiconductor be liable for any + * direct, indirect, incidental, special, exemplary, or consequential damages + * (including, but not limited to, procurement of substitute goods or services; + * loss of use, data, or profits; or business interruption) however caused and + * on any theory of liability, whether in contract, strict liability, or tort + * (including negligence or otherwise) arising in any way out of the use of + * this software, even if advised of the possibility of such damage. + */ + +/dts-v1/; + +/include/ "e6500_power_isa.dtsi" + +/ { + compatible = "fsl,B4420"; + #address-cells = <2>; + #size-cells = <2>; + interrupt-parent = <&mpic>; + + aliases { + ccsr = &soc; + dcsr = &dcsr; + + serial0 = &serial0; + serial1 = &serial1; + serial2 = &serial2; + serial3 = &serial3; + pci0 = &pci0; + dma0 = &dma0; + dma1 = &dma1; + sdhc = &sdhc; + }; + + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu0: PowerPC,e6500@0 { + device_type = "cpu"; + reg = <0 1>; + clocks = <&mux0>; + next-level-cache = <&L2>; + fsl,portid-mapping = <0x80000000>; + }; + cpu1: PowerPC,e6500@2 { + device_type = "cpu"; + reg = <2 3>; + clocks = <&mux0>; + next-level-cache = <&L2>; + fsl,portid-mapping = <0x80000000>; + }; + }; +}; diff --git a/arch/powerpc/boot/dts/fsl/b4860si-post.dtsi b/arch/powerpc/boot/dts/fsl/b4860si-post.dtsi new file mode 100644 index 000000000..f35e9e0a5 --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/b4860si-post.dtsi @@ -0,0 +1,208 @@ +/* + * B4860 Silicon/SoC Device Tree Source (post include) + * + * Copyright 2012 - 2014 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +/include/ "b4si-post.dtsi" + +/* controller at 0x200000 */ +&pci0 { + compatible = "fsl,b4860-pcie", "fsl,qoriq-pcie-v2.4"; +}; + +&rio { + compatible = "fsl,srio"; + interrupts = <16 2 1 20>; + #address-cells = <2>; + #size-cells = <2>; + fsl,iommu-parent = <&pamu0>; + ranges; + + port1 { + #address-cells = <2>; + #size-cells = <2>; + cell-index = <1>; + fsl,liodn-reg = <&guts 0x510>; /* RIO1LIODNR */ + }; + + port2 { + #address-cells = <2>; + #size-cells = <2>; + cell-index = <2>; + fsl,liodn-reg = <&guts 0x514>; /* RIO2LIODNR */ + }; +}; + +&dcsr { + dcsr-epu@0 { + compatible = "fsl,b4860-dcsr-epu", "fsl,dcsr-epu"; + }; + dcsr-npc { + compatible = "fsl,b4860-dcsr-cnpc", "fsl,dcsr-cnpc"; + }; + dcsr-dpaa@9000 { + compatible = "fsl,b4860-dcsr-dpaa", "fsl,dcsr-dpaa"; + }; + dcsr-ocn@11000 { + compatible = "fsl,b4860-dcsr-ocn", "fsl,dcsr-ocn"; + }; + dcsr-ddr@13000 { + compatible = "fsl,dcsr-ddr"; + dev-handle = <&ddr2>; + reg = <0x13000 0x1000>; + }; + dcsr-nal@18000 { + compatible = "fsl,b4860-dcsr-nal", "fsl,dcsr-nal"; + }; + dcsr-rcpm@22000 { + compatible = "fsl,b4860-dcsr-rcpm", "fsl,dcsr-rcpm"; + }; + dcsr-snpc@30000 { + compatible = "fsl,b4860-dcsr-snpc", "fsl,dcsr-snpc"; + }; + dcsr-snpc@31000 { + compatible = "fsl,b4860-dcsr-snpc", "fsl,dcsr-snpc"; + }; + dcsr-cpu-sb-proxy@108000 { + compatible = "fsl,dcsr-e6500-sb-proxy", "fsl,dcsr-cpu-sb-proxy"; + cpu-handle = <&cpu1>; + reg = <0x108000 0x1000 0x109000 0x1000>; + }; + dcsr-cpu-sb-proxy@110000 { + compatible = "fsl,dcsr-e6500-sb-proxy", "fsl,dcsr-cpu-sb-proxy"; + cpu-handle = <&cpu2>; + reg = <0x110000 0x1000 0x111000 0x1000>; + }; + dcsr-cpu-sb-proxy@118000 { + compatible = "fsl,dcsr-e6500-sb-proxy", "fsl,dcsr-cpu-sb-proxy"; + cpu-handle = <&cpu3>; + reg = <0x118000 0x1000 0x119000 0x1000>; + }; +}; + +&bportals { + bman-portal@38000 { + compatible = "fsl,bman-portal"; + reg = <0x38000 0x4000>, <0x100e000 0x1000>; + interrupts = <133 2 0 0>; + }; + bman-portal@3c000 { + compatible = "fsl,bman-portal"; + reg = <0x3c000 0x4000>, <0x100f000 0x1000>; + interrupts = <135 2 0 0>; + }; + bman-portal@40000 { + compatible = "fsl,bman-portal"; + reg = <0x40000 0x4000>, <0x1010000 0x1000>; + interrupts = <137 2 0 0>; + }; + bman-portal@44000 { + compatible = "fsl,bman-portal"; + reg = <0x44000 0x4000>, <0x1011000 0x1000>; + interrupts = <139 2 0 0>; + }; + bman-portal@48000 { + compatible = "fsl,bman-portal"; + reg = <0x48000 0x4000>, <0x1012000 0x1000>; + interrupts = <141 2 0 0>; + }; + bman-portal@4c000 { + compatible = "fsl,bman-portal"; + reg = <0x4c000 0x4000>, <0x1013000 0x1000>; + interrupts = <143 2 0 0>; + }; + bman-portal@50000 { + compatible = "fsl,bman-portal"; + reg = <0x50000 0x4000>, <0x1014000 0x1000>; + interrupts = <145 2 0 0>; + }; + bman-portal@54000 { + compatible = "fsl,bman-portal"; + reg = <0x54000 0x4000>, <0x1015000 0x1000>; + interrupts = <147 2 0 0>; + }; + bman-portal@58000 { + compatible = "fsl,bman-portal"; + reg = <0x58000 0x4000>, <0x1016000 0x1000>; + interrupts = <149 2 0 0>; + }; + bman-portal@5c000 { + compatible = "fsl,bman-portal"; + reg = <0x5c000 0x4000>, <0x1017000 0x1000>; + interrupts = <151 2 0 0>; + }; + bman-portal@60000 { + compatible = "fsl,bman-portal"; + reg = <0x60000 0x4000>, <0x1018000 0x1000>; + interrupts = <153 2 0 0>; + }; +}; + +&soc { + ddr2: memory-controller@9000 { + compatible = "fsl,qoriq-memory-controller-v4.5", "fsl,qoriq-memory-controller"; + reg = <0x9000 0x1000>; + interrupts = <16 2 1 9>; + }; + + cpc: l3-cache-controller@10000 { + compatible = "fsl,b4860-l3-cache-controller", "cache"; + }; + + guts: global-utilities@e0000 { + compatible = "fsl,b4860-device-config", "fsl,qoriq-device-config-2.0"; + }; + +/include/ "qoriq-clockgen2.dtsi" + global-utilities@e1000 { + compatible = "fsl,b4860-clockgen", "fsl,qoriq-clockgen-2.0"; + + mux0: mux0@0 { + #clock-cells = <0>; + reg = <0x0 0x4>; + compatible = "fsl,qoriq-core-mux-2.0"; + clocks = <&pll0 0>, <&pll0 1>, <&pll0 2>, + <&pll1 0>, <&pll1 1>, <&pll1 2>; + clock-names = "pll0", "pll0-div2", "pll0-div4", + "pll1", "pll1-div2", "pll1-div4"; + clock-output-names = "cmux0"; + }; + }; + + rcpm: global-utilities@e2000 { + compatible = "fsl,b4860-rcpm", "fsl,qoriq-rcpm-2.0"; + }; + + L2: l2-cache-controller@c20000 { + compatible = "fsl,b4860-l2-cache-controller"; + }; +}; diff --git a/arch/powerpc/boot/dts/fsl/b4860si-pre.dtsi b/arch/powerpc/boot/dts/fsl/b4860si-pre.dtsi new file mode 100644 index 000000000..1948f73fd --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/b4860si-pre.dtsi @@ -0,0 +1,93 @@ +/* + * B4860 Silicon/SoC Device Tree Source (pre include) + * + * Copyright 2012 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +/dts-v1/; + +/include/ "e6500_power_isa.dtsi" + +/ { + compatible = "fsl,B4860"; + #address-cells = <2>; + #size-cells = <2>; + interrupt-parent = <&mpic>; + + aliases { + ccsr = &soc; + dcsr = &dcsr; + + serial0 = &serial0; + serial1 = &serial1; + serial2 = &serial2; + serial3 = &serial3; + pci0 = &pci0; + dma0 = &dma0; + dma1 = &dma1; + sdhc = &sdhc; + }; + + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu0: PowerPC,e6500@0 { + device_type = "cpu"; + reg = <0 1>; + clocks = <&mux0>; + next-level-cache = <&L2>; + fsl,portid-mapping = <0x80000000>; + }; + cpu1: PowerPC,e6500@2 { + device_type = "cpu"; + reg = <2 3>; + clocks = <&mux0>; + next-level-cache = <&L2>; + fsl,portid-mapping = <0x80000000>; + }; + cpu2: PowerPC,e6500@4 { + device_type = "cpu"; + reg = <4 5>; + clocks = <&mux0>; + next-level-cache = <&L2>; + fsl,portid-mapping = <0x80000000>; + }; + cpu3: PowerPC,e6500@6 { + device_type = "cpu"; + reg = <6 7>; + clocks = <&mux0>; + next-level-cache = <&L2>; + fsl,portid-mapping = <0x80000000>; + }; + }; +}; diff --git a/arch/powerpc/boot/dts/fsl/b4si-post.dtsi b/arch/powerpc/boot/dts/fsl/b4si-post.dtsi new file mode 100644 index 000000000..73136c002 --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/b4si-post.dtsi @@ -0,0 +1,356 @@ +/* + * B4420 Silicon/SoC Device Tree Source (post include) + * + * Copyright 2012 - 2014 Freescale Semiconductor, Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * This software is provided by Freescale Semiconductor "as is" and any + * express or implied warranties, including, but not limited to, the implied + * warranties of merchantability and fitness for a particular purpose are + * disclaimed. In no event shall Freescale Semiconductor be liable for any + * direct, indirect, incidental, special, exemplary, or consequential damages + * (including, but not limited to, procurement of substitute goods or services; + * loss of use, data, or profits; or business interruption) however caused and + * on any theory of liability, whether in contract, strict liability, or tort + * (including negligence or otherwise) arising in any way out of the use of + * this software, even if advised of the possibility of such damage. + */ + +&bman_fbpr { + compatible = "fsl,bman-fbpr"; + alloc-ranges = <0 0 0x10000 0>; +}; + +&ifc { + #address-cells = <2>; + #size-cells = <1>; + compatible = "fsl,ifc", "simple-bus"; + interrupts = <25 2 0 0>; +}; + +/* controller at 0x200000 */ +&pci0 { + compatible = "fsl,b4-pcie", "fsl,qoriq-pcie-v2.4"; + device_type = "pci"; + #size-cells = <2>; + #address-cells = <3>; + bus-range = <0x0 0xff>; + interrupts = <20 2 0 0>; + fsl,iommu-parent = <&pamu0>; + pcie@0 { + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + device_type = "pci"; + reg = <0 0 0 0 0>; + interrupts = <20 2 0 0>; + interrupt-map-mask = <0xf800 0 0 7>; + interrupt-map = < + /* IDSEL 0x0 */ + 0000 0 0 1 &mpic 40 1 0 0 + 0000 0 0 2 &mpic 1 1 0 0 + 0000 0 0 3 &mpic 2 1 0 0 + 0000 0 0 4 &mpic 3 1 0 0 + >; + }; +}; + +&dcsr { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,dcsr", "simple-bus"; + + dcsr-epu@0 { + compatible = "fsl,b4-dcsr-epu", "fsl,dcsr-epu"; + interrupts = <52 2 0 0 + 84 2 0 0 + 85 2 0 0 + 94 2 0 0 + 95 2 0 0>; + reg = <0x0 0x1000>; + }; + dcsr-npc { + compatible = "fsl,b4-dcsr-cnpc", "fsl,dcsr-cnpc"; + reg = <0x1000 0x1000 0x1002000 0x10000>; + }; + dcsr-nxc@2000 { + compatible = "fsl,dcsr-nxc"; + reg = <0x2000 0x1000>; + }; + dcsr-corenet { + compatible = "fsl,dcsr-corenet"; + reg = <0x8000 0x1000 0x1A000 0x1000>; + }; + dcsr-dpaa@9000 { + compatible = "fsl,b4-dcsr-dpaa", "fsl,dcsr-dpaa"; + reg = <0x9000 0x1000>; + }; + dcsr-ocn@11000 { + compatible = "fsl,b4-dcsr-ocn", "fsl,dcsr-ocn"; + reg = <0x11000 0x1000>; + }; + dcsr-ddr@12000 { + compatible = "fsl,dcsr-ddr"; + dev-handle = <&ddr1>; + reg = <0x12000 0x1000>; + }; + dcsr-nal@18000 { + compatible = "fsl,b4-dcsr-nal", "fsl,dcsr-nal"; + reg = <0x18000 0x1000>; + }; + dcsr-rcpm@22000 { + compatible = "fsl,b4-dcsr-rcpm", "fsl,dcsr-rcpm"; + reg = <0x22000 0x1000>; + }; + dcsr-snpc@30000 { + compatible = "fsl,b4-dcsr-snpc", "fsl,dcsr-snpc"; + reg = <0x30000 0x1000 0x1022000 0x10000>; + }; + dcsr-snpc@31000 { + compatible = "fsl,b4-dcsr-snpc", "fsl,dcsr-snpc"; + reg = <0x31000 0x1000 0x1042000 0x10000>; + }; + dcsr-cpu-sb-proxy@100000 { + compatible = "fsl,dcsr-e6500-sb-proxy", "fsl,dcsr-cpu-sb-proxy"; + cpu-handle = <&cpu0>; + reg = <0x100000 0x1000 0x101000 0x1000>; + }; +}; + +&bportals { + #address-cells = <0x1>; + #size-cells = <0x1>; + compatible = "simple-bus"; + + bman-portal@0 { + compatible = "fsl,bman-portal"; + reg = <0x0 0x4000>, <0x1000000 0x1000>; + interrupts = <105 2 0 0>; + }; + bman-portal@4000 { + compatible = "fsl,bman-portal"; + reg = <0x4000 0x4000>, <0x1001000 0x1000>; + interrupts = <107 2 0 0>; + }; + bman-portal@8000 { + compatible = "fsl,bman-portal"; + reg = <0x8000 0x4000>, <0x1002000 0x1000>; + interrupts = <109 2 0 0>; + }; + bman-portal@c000 { + compatible = "fsl,bman-portal"; + reg = <0xc000 0x4000>, <0x1003000 0x1000>; + interrupts = <111 2 0 0>; + }; + bman-portal@10000 { + compatible = "fsl,bman-portal"; + reg = <0x10000 0x4000>, <0x1004000 0x1000>; + interrupts = <113 2 0 0>; + }; + bman-portal@14000 { + compatible = "fsl,bman-portal"; + reg = <0x14000 0x4000>, <0x1005000 0x1000>; + interrupts = <115 2 0 0>; + }; + bman-portal@18000 { + compatible = "fsl,bman-portal"; + reg = <0x18000 0x4000>, <0x1006000 0x1000>; + interrupts = <117 2 0 0>; + }; + bman-portal@1c000 { + compatible = "fsl,bman-portal"; + reg = <0x1c000 0x4000>, <0x1007000 0x1000>; + interrupts = <119 2 0 0>; + }; + bman-portal@20000 { + compatible = "fsl,bman-portal"; + reg = <0x20000 0x4000>, <0x1008000 0x1000>; + interrupts = <121 2 0 0>; + }; + bman-portal@24000 { + compatible = "fsl,bman-portal"; + reg = <0x24000 0x4000>, <0x1009000 0x1000>; + interrupts = <123 2 0 0>; + }; + bman-portal@28000 { + compatible = "fsl,bman-portal"; + reg = <0x28000 0x4000>, <0x100a000 0x1000>; + interrupts = <125 2 0 0>; + }; + bman-portal@2c000 { + compatible = "fsl,bman-portal"; + reg = <0x2c000 0x4000>, <0x100b000 0x1000>; + interrupts = <127 2 0 0>; + }; + bman-portal@30000 { + compatible = "fsl,bman-portal"; + reg = <0x30000 0x4000>, <0x100c000 0x1000>; + interrupts = <129 2 0 0>; + }; + bman-portal@34000 { + compatible = "fsl,bman-portal"; + reg = <0x34000 0x4000>, <0x100d000 0x1000>; + interrupts = <131 2 0 0>; + }; +}; + +&soc { + #address-cells = <1>; + #size-cells = <1>; + device_type = "soc"; + compatible = "simple-bus"; + + soc-sram-error { + compatible = "fsl,soc-sram-error"; + interrupts = <16 2 1 2>; + }; + + corenet-law@0 { + compatible = "fsl,corenet-law"; + reg = <0x0 0x1000>; + fsl,num-laws = <32>; + }; + + ddr1: memory-controller@8000 { + compatible = "fsl,qoriq-memory-controller-v4.5", "fsl,qoriq-memory-controller"; + reg = <0x8000 0x1000>; + interrupts = <16 2 1 8>; + }; + + cpc: l3-cache-controller@10000 { + compatible = "fsl,b4-l3-cache-controller", "cache"; + reg = <0x10000 0x1000>; + interrupts = <16 2 1 4>; + }; + + corenet-cf@18000 { + compatible = "fsl,corenet2-cf", "fsl,corenet-cf"; + reg = <0x18000 0x1000>; + interrupts = <16 2 1 0>; + fsl,ccf-num-csdids = <32>; + fsl,ccf-num-snoopids = <32>; + }; + + iommu@20000 { + compatible = "fsl,pamu-v1.0", "fsl,pamu"; + reg = <0x20000 0x4000>; + fsl,portid-mapping = <0x8000>; + #address-cells = <1>; + #size-cells = <1>; + interrupts = < + 24 2 0 0 + 16 2 1 1>; + + + /* PCIe, DMA, SRIO */ + pamu0: pamu@0 { + reg = <0 0x1000>; + fsl,primary-cache-geometry = <8 1>; + fsl,secondary-cache-geometry = <32 2>; + }; + + /* AXI2, Maple */ + pamu1: pamu@1000 { + reg = <0x1000 0x1000>; + fsl,primary-cache-geometry = <32 1>; + fsl,secondary-cache-geometry = <32 2>; + }; + + /* Q/BMan */ + pamu2: pamu@2000 { + reg = <0x2000 0x1000>; + fsl,primary-cache-geometry = <32 1>; + fsl,secondary-cache-geometry = <32 2>; + }; + + /* AXI1, FMAN */ + pamu3: pamu@3000 { + reg = <0x3000 0x1000>; + fsl,primary-cache-geometry = <32 1>; + fsl,secondary-cache-geometry = <32 2>; + }; + }; + +/include/ "qoriq-mpic4.3.dtsi" + + guts: global-utilities@e0000 { + compatible = "fsl,b4-device-config"; + reg = <0xe0000 0xe00>; + fsl,has-rstcr; + fsl,liodn-bits = <12>; + }; + + clockgen: global-utilities@e1000 { + compatible = "fsl,b4-clockgen", "fsl,qoriq-clockgen-2.0"; + reg = <0xe1000 0x1000>; + }; + + rcpm: global-utilities@e2000 { + compatible = "fsl,b4-rcpm", "fsl,qoriq-rcpm-2.0"; + reg = <0xe2000 0x1000>; + }; + +/include/ "elo3-dma-0.dtsi" + dma@100300 { + fsl,iommu-parent = <&pamu0>; + fsl,liodn-reg = <&guts 0x580>; /* DMA1LIODNR */ + }; + +/include/ "elo3-dma-1.dtsi" + dma@101300 { + fsl,iommu-parent = <&pamu0>; + fsl,liodn-reg = <&guts 0x584>; /* DMA2LIODNR */ + }; + +/include/ "qonverge-usb2-dr-0.dtsi" + usb0: usb@210000 { + compatible = "fsl-usb2-dr-v2.4", "fsl-usb2-dr"; + fsl,iommu-parent = <&pamu1>; + fsl,liodn-reg = <&guts 0x520>; /* USB1LIODNR */ + }; + +/include/ "qoriq-espi-0.dtsi" + spi@110000 { + fsl,espi-num-chipselects = <4>; + }; + +/include/ "qoriq-esdhc-0.dtsi" + sdhc@114000 { + sdhci,auto-cmd12; + fsl,iommu-parent = <&pamu1>; + fsl,liodn-reg = <&guts 0x530>; /* eSDHCLIODNR */ + }; + +/include/ "qoriq-i2c-0.dtsi" +/include/ "qoriq-i2c-1.dtsi" +/include/ "qoriq-duart-0.dtsi" +/include/ "qoriq-duart-1.dtsi" +/include/ "qoriq-sec5.3-0.dtsi" + +/include/ "qoriq-bman1.dtsi" + bman: bman@31a000 { + interrupts = <16 2 1 29>; + }; + + L2: l2-cache-controller@c20000 { + compatible = "fsl,b4-l2-cache-controller"; + reg = <0xc20000 0x1000>; + next-level-cache = <&cpc>; + }; +}; diff --git a/arch/powerpc/boot/dts/fsl/bsc9131si-post.dtsi b/arch/powerpc/boot/dts/fsl/bsc9131si-post.dtsi new file mode 100644 index 000000000..0c0efa94c --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/bsc9131si-post.dtsi @@ -0,0 +1,193 @@ +/* + * BSC9131 Silicon/SoC Device Tree Source (post include) + * + * Copyright 2011-2012 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +&ifc { + #address-cells = <2>; + #size-cells = <1>; + compatible = "fsl,ifc", "simple-bus"; + interrupts = <16 2 0 0 20 2 0 0>; +}; + +&soc { + #address-cells = <1>; + #size-cells = <1>; + device_type = "soc"; + compatible = "fsl,bsc9131-immr", "simple-bus"; + bus-frequency = <0>; // Filled out by uboot. + + ecm-law@0 { + compatible = "fsl,ecm-law"; + reg = <0x0 0x1000>; + fsl,num-laws = <12>; + }; + + ecm@1000 { + compatible = "fsl,bsc9131-ecm", "fsl,ecm"; + reg = <0x1000 0x1000>; + interrupts = <16 2 0 0>; + }; + + memory-controller@2000 { + compatible = "fsl,bsc9131-memory-controller"; + reg = <0x2000 0x1000>; + interrupts = <16 2 0 0>; + }; + +/include/ "pq3-i2c-0.dtsi" + i2c@3000 { + interrupts = <17 2 0 0>; + }; + +/include/ "pq3-i2c-1.dtsi" + i2c@3100 { + interrupts = <17 2 0 0>; + }; + +/include/ "pq3-duart-0.dtsi" + serial0: serial@4500 { + interrupts = <18 2 0 0>; + }; + + serial1: serial@4600 { + interrupts = <18 2 0 0 >; + }; +/include/ "pq3-espi-0.dtsi" + spi0: spi@7000 { + fsl,espi-num-chipselects = <1>; + interrupts = <22 0x2 0 0>; + }; + +/include/ "pq3-gpio-0.dtsi" + gpio-controller@f000 { + interrupts = <19 0x2 0 0>; + }; + + L2: l2-cache-controller@20000 { + compatible = "fsl,bsc9131-l2-cache-controller"; + reg = <0x20000 0x1000>; + cache-line-size = <32>; // 32 bytes + cache-size = <0x40000>; // L2,256K + interrupts = <16 2 0 0>; + }; + +/include/ "pq3-dma-0.dtsi" + +dma@21300 { + + dma-channel@0 { + interrupts = <62 2 0 0>; + }; + + dma-channel@80 { + interrupts = <63 2 0 0>; + }; + + dma-channel@100 { + interrupts = <64 2 0 0>; + }; + + dma-channel@180 { + interrupts = <65 2 0 0>; + }; +}; + +/include/ "pq3-usb2-dr-0.dtsi" +usb@22000 { + compatible = "fsl-usb2-dr","fsl-usb2-dr-v2.2"; + interrupts = <40 0x2 0 0>; +}; + +/include/ "pq3-esdhc-0.dtsi" + sdhc@2e000 { + sdhci,auto-cmd12; + interrupts = <41 0x2 0 0>; + }; + +/include/ "pq3-sec4.4-0.dtsi" +crypto@30000 { + interrupts = <57 2 0 0>; + + sec_jr0: jr@1000 { + interrupts = <58 2 0 0>; + }; + + sec_jr1: jr@2000 { + interrupts = <59 2 0 0>; + }; + + sec_jr2: jr@3000 { + interrupts = <60 2 0 0>; + }; + + sec_jr3: jr@4000 { + interrupts = <61 2 0 0>; + }; +}; + +/include/ "pq3-mpic.dtsi" + +timer@41100 { + compatible = "fsl,mpic-v1.2-msgr", "fsl,mpic-msg"; + reg = <0x41400 0x200>; + interrupts = < + 0xb0 2 + 0xb1 2 + 0xb2 2 + 0xb3 2>; +}; + +/include/ "pq3-etsec2-0.dtsi" +enet0: ethernet@b0000 { + queue-group@b0000 { + fsl,rx-bit-map = <0xff>; + fsl,tx-bit-map = <0xff>; + interrupts = <26 2 0 0 27 2 0 0 28 2 0 0>; + }; +}; + +/include/ "pq3-etsec2-1.dtsi" +enet1: ethernet@b1000 { + queue-group@b1000 { + fsl,rx-bit-map = <0xff>; + fsl,tx-bit-map = <0xff>; + interrupts = <33 2 0 0 34 2 0 0 35 2 0 0>; + }; +}; + +global-utilities@e0000 { + compatible = "fsl,bsc9131-guts"; + reg = <0xe0000 0x1000>; + fsl,has-rstcr; + }; +}; diff --git a/arch/powerpc/boot/dts/fsl/bsc9131si-pre.dtsi b/arch/powerpc/boot/dts/fsl/bsc9131si-pre.dtsi new file mode 100644 index 000000000..f6ec4a675 --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/bsc9131si-pre.dtsi @@ -0,0 +1,62 @@ +/* + * BSC9131 Silicon/SoC Device Tree Source (pre include) + * + * Copyright 2011-2012 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +/dts-v1/; + +/include/ "e500v2_power_isa.dtsi" + +/ { + compatible = "fsl,BSC9131"; + #address-cells = <2>; + #size-cells = <2>; + interrupt-parent = <&mpic>; + + aliases { + serial0 = &serial0; + ethernet0 = &enet0; + ethernet1 = &enet1; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + PowerPC,BSC9131@0 { + device_type = "cpu"; + compatible = "fsl,e500v2"; + reg = <0x0>; + next-level-cache = <&L2>; + }; + }; +}; diff --git a/arch/powerpc/boot/dts/fsl/bsc9132si-post.dtsi b/arch/powerpc/boot/dts/fsl/bsc9132si-post.dtsi new file mode 100644 index 000000000..c72307198 --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/bsc9132si-post.dtsi @@ -0,0 +1,185 @@ +/* + * BSC9132 Silicon/SoC Device Tree Source (post include) + * + * Copyright 2014 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +&ifc { + #address-cells = <2>; + #size-cells = <1>; + compatible = "fsl,ifc", "simple-bus"; + /* FIXME: Test whether interrupts are split */ + interrupts = <16 2 0 0 20 2 0 0>; +}; + +&soc { + #address-cells = <1>; + #size-cells = <1>; + device_type = "soc"; + compatible = "fsl,bsc9132-immr", "simple-bus"; + bus-frequency = <0>; // Filled out by uboot. + + ecm-law@0 { + compatible = "fsl,ecm-law"; + reg = <0x0 0x1000>; + fsl,num-laws = <12>; + }; + + ecm@1000 { + compatible = "fsl,bsc9132-ecm", "fsl,ecm"; + reg = <0x1000 0x1000>; + interrupts = <16 2 0 0>; + }; + + memory-controller@2000 { + compatible = "fsl,bsc9132-memory-controller"; + reg = <0x2000 0x1000>; + interrupts = <16 2 1 8>; + }; + +/include/ "pq3-i2c-0.dtsi" + i2c@3000 { + interrupts = <17 2 0 0>; + }; + +/include/ "pq3-i2c-1.dtsi" + i2c@3100 { + interrupts = <17 2 0 0>; + }; + +/include/ "pq3-duart-0.dtsi" + serial0: serial@4500 { + interrupts = <18 2 0 0>; + }; + + serial1: serial@4600 { + interrupts = <18 2 0 0 >; + }; +/include/ "pq3-espi-0.dtsi" + spi0: spi@7000 { + fsl,espi-num-chipselects = <1>; + interrupts = <22 0x2 0 0>; + }; + +/include/ "pq3-gpio-0.dtsi" + gpio-controller@f000 { + interrupts = <19 0x2 0 0>; + }; + + L2: l2-cache-controller@20000 { + compatible = "fsl,bsc9132-l2-cache-controller"; + reg = <0x20000 0x1000>; + cache-line-size = <32>; // 32 bytes + cache-size = <0x40000>; // L2,256K + interrupts = <16 2 1 0>; + }; + +/include/ "pq3-dma-0.dtsi" + +dma@21300 { + + dma-channel@0 { + interrupts = <62 2 0 0>; + }; + + dma-channel@80 { + interrupts = <63 2 0 0>; + }; + + dma-channel@100 { + interrupts = <64 2 0 0>; + }; + + dma-channel@180 { + interrupts = <65 2 0 0>; + }; +}; + +/include/ "pq3-usb2-dr-0.dtsi" +usb@22000 { + compatible = "fsl-usb2-dr","fsl-usb2-dr-v2.2"; + interrupts = <40 0x2 0 0>; +}; + +/include/ "pq3-esdhc-0.dtsi" + sdhc@2e000 { + fsl,sdhci-auto-cmd12; + interrupts = <41 0x2 0 0>; + }; + +/include/ "pq3-sec4.4-0.dtsi" +crypto@30000 { + interrupts = <57 2 0 0>; + + sec_jr0: jr@1000 { + interrupts = <58 2 0 0>; + }; + + sec_jr1: jr@2000 { + interrupts = <59 2 0 0>; + }; + + sec_jr2: jr@3000 { + interrupts = <60 2 0 0>; + }; + + sec_jr3: jr@4000 { + interrupts = <61 2 0 0>; + }; +}; + +/include/ "pq3-mpic.dtsi" +/include/ "pq3-mpic-timer-B.dtsi" + +/include/ "pq3-etsec2-0.dtsi" +enet0: ethernet@b0000 { + queue-group@b0000 { + fsl,rx-bit-map = <0xff>; + fsl,tx-bit-map = <0xff>; + interrupts = <26 2 0 0 27 2 0 0 28 2 0 0>; + }; +}; + +/include/ "pq3-etsec2-1.dtsi" +enet1: ethernet@b1000 { + queue-group@b1000 { + fsl,rx-bit-map = <0xff>; + fsl,tx-bit-map = <0xff>; + interrupts = <33 2 0 0 34 2 0 0 35 2 0 0>; + }; +}; + +global-utilities@e0000 { + compatible = "fsl,bsc9132-guts"; + reg = <0xe0000 0x1000>; + fsl,has-rstcr; + }; +}; diff --git a/arch/powerpc/boot/dts/fsl/bsc9132si-pre.dtsi b/arch/powerpc/boot/dts/fsl/bsc9132si-pre.dtsi new file mode 100644 index 000000000..301a9dba5 --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/bsc9132si-pre.dtsi @@ -0,0 +1,66 @@ +/* + * BSC9132 Silicon/SoC Device Tree Source (pre include) + * + * Copyright 2014 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +/dts-v1/; + +/include/ "e500v2_power_isa.dtsi" + +/ { + #address-cells = <2>; + #size-cells = <2>; + interrupt-parent = <&mpic>; + + aliases { + serial0 = &serial0; + ethernet0 = &enet0; + ethernet1 = &enet1; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu0: PowerPC,e500v2@0 { + device_type = "cpu"; + reg = <0x0>; + next-level-cache = <&L2>; + }; + + cpu1: PowerPC,e500v2@1 { + device_type = "cpu"; + reg = <0x1>; + next-level-cache = <&L2>; + }; + }; +}; diff --git a/arch/powerpc/boot/dts/fsl/c293si-post.dtsi b/arch/powerpc/boot/dts/fsl/c293si-post.dtsi new file mode 100644 index 000000000..bd208320b --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/c293si-post.dtsi @@ -0,0 +1,193 @@ +/* + * C293 Silicon/SoC Device Tree Source (post include) + * + * Copyright 2012 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +&ifc { + #address-cells = <2>; + #size-cells = <1>; + compatible = "fsl,ifc", "simple-bus"; + interrupts = <19 2 0 0>; +}; + +/* controller at 0xa000 */ +&pci0 { + compatible = "fsl,qoriq-pcie-v2.2", "fsl,qoriq-pcie"; + device_type = "pci"; + #size-cells = <2>; + #address-cells = <3>; + bus-range = <0 255>; + clock-frequency = <33333333>; + interrupts = <16 2 0 0>; + + pcie@0 { + reg = <0 0 0 0 0>; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + device_type = "pci"; + interrupts = <16 2 0 0>; + interrupt-map-mask = <0xf800 0 0 7>; + interrupt-map = < + /* IDSEL 0x0 */ + 0000 0x0 0x0 0x1 &mpic 0x0 0x1 0x0 0x0 + 0000 0x0 0x0 0x2 &mpic 0x1 0x1 0x0 0x0 + 0000 0x0 0x0 0x3 &mpic 0x2 0x1 0x0 0x0 + 0000 0x0 0x0 0x4 &mpic 0x3 0x1 0x0 0x0 + >; + }; +}; + +&soc { + #address-cells = <1>; + #size-cells = <1>; + device_type = "soc"; + compatible = "simple-bus"; + bus-frequency = <0>; // Filled out by uboot. + + ecm-law@0 { + compatible = "fsl,ecm-law"; + reg = <0x0 0x1000>; + fsl,num-laws = <12>; + }; + + ecm@1000 { + compatible = "fsl,c293-ecm", "fsl,ecm"; + reg = <0x1000 0x1000>; + interrupts = <16 2 0 0>; + }; + + memory-controller@2000 { + compatible = "fsl,c293-memory-controller"; + reg = <0x2000 0x1000>; + interrupts = <16 2 0 0>; + }; + +/include/ "pq3-i2c-0.dtsi" +/include/ "pq3-i2c-1.dtsi" +/include/ "pq3-duart-0.dtsi" +/include/ "pq3-espi-0.dtsi" + spi0: spi@7000 { + fsl,espi-num-chipselects = <1>; + }; + +/include/ "pq3-gpio-0.dtsi" + L2: l2-cache-controller@20000 { + compatible = "fsl,c293-l2-cache-controller"; + reg = <0x20000 0x1000>; + cache-line-size = <32>; // 32 bytes + cache-size = <0x80000>; // L2,512K + interrupts = <16 2 0 0>; + }; + +/include/ "pq3-dma-0.dtsi" +/include/ "pq3-esdhc-0.dtsi" + sdhc@2e000 { + compatible = "fsl,c293-esdhc", "fsl,esdhc"; + sdhci,auto-cmd12; + }; + + crypto@80000 { +/include/ "qoriq-sec6.0-0.dtsi" + }; + + crypto@80000 { + reg = <0x80000 0x20000>; + ranges = <0x0 0x80000 0x20000>; + + jr@1000{ + interrupts = <45 2 0 0>; + }; + jr@2000{ + interrupts = <57 2 0 0>; + }; + }; + + crypto@a0000 { +/include/ "qoriq-sec6.0-0.dtsi" + }; + + crypto@a0000 { + reg = <0xa0000 0x20000>; + ranges = <0x0 0xa0000 0x20000>; + + jr@1000{ + interrupts = <49 2 0 0>; + }; + jr@2000{ + interrupts = <50 2 0 0>; + }; + }; + + crypto@c0000 { +/include/ "qoriq-sec6.0-0.dtsi" + }; + + crypto@c0000 { + reg = <0xc0000 0x20000>; + ranges = <0x0 0xc0000 0x20000>; + + jr@1000{ + interrupts = <55 2 0 0>; + }; + jr@2000{ + interrupts = <56 2 0 0>; + }; + }; + +/include/ "pq3-mpic.dtsi" +/include/ "pq3-mpic-timer-B.dtsi" + +/include/ "pq3-etsec2-0.dtsi" + enet0: ethernet@b0000 { + queue-group@b0000 { + reg = <0x10000 0x1000>; + fsl,rx-bit-map = <0xff>; + fsl,tx-bit-map = <0xff>; + }; + }; + +/include/ "pq3-etsec2-1.dtsi" + enet1: ethernet@b1000 { + queue-group@b1000 { + reg = <0x11000 0x1000>; + fsl,rx-bit-map = <0xff>; + fsl,tx-bit-map = <0xff>; + }; + }; + + global-utilities@e0000 { + compatible = "fsl,c293-guts"; + reg = <0xe0000 0x1000>; + fsl,has-rstcr; + }; +}; diff --git a/arch/powerpc/boot/dts/fsl/c293si-pre.dtsi b/arch/powerpc/boot/dts/fsl/c293si-pre.dtsi new file mode 100644 index 000000000..065049d76 --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/c293si-pre.dtsi @@ -0,0 +1,63 @@ +/* + * C293 Silicon/SoC Device Tree Source (pre include) + * + * Copyright 2012 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +/dts-v1/; + +/include/ "e500v2_power_isa.dtsi" + +/ { + compatible = "fsl,C293"; + #address-cells = <2>; + #size-cells = <2>; + interrupt-parent = <&mpic>; + + aliases { + serial0 = &serial0; + serial1 = &serial1; + ethernet0 = &enet0; + ethernet1 = &enet1; + pci0 = &pci0; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + PowerPC,e500v2@0 { + device_type = "cpu"; + reg = <0x0>; + next-level-cache = <&L2>; + }; + }; +}; diff --git a/arch/powerpc/boot/dts/fsl/e500mc_power_isa.dtsi b/arch/powerpc/boot/dts/fsl/e500mc_power_isa.dtsi new file mode 100644 index 000000000..ea145c91c --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/e500mc_power_isa.dtsi @@ -0,0 +1,59 @@ +/* + * e500mc Power ISA Device Tree Source (include) + * + * Copyright 2012 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor "AS IS" AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +/ { + cpus { + power-isa-version = "2.06"; + power-isa-b; // Base + power-isa-e; // Embedded + power-isa-atb; // Alternate Time Base + power-isa-cs; // Cache Specification + power-isa-ds; // Decorated Storage + power-isa-e.ed; // Embedded.Enhanced Debug + power-isa-e.pd; // Embedded.External PID + power-isa-e.hv; // Embedded.Hypervisor + power-isa-e.le; // Embedded.Little-Endian + power-isa-e.pm; // Embedded.Performance Monitor + power-isa-e.pc; // Embedded.Processor Control + power-isa-ecl; // Embedded Cache Locking + power-isa-exp; // External Proxy + power-isa-fp; // Floating Point + power-isa-fp.r; // Floating Point.Record + power-isa-mmc; // Memory Coherence + power-isa-scpm; // Store Conditional Page Mobility + power-isa-wt; // Wait + fsl,eref-deo; // Data Cache Extended Operations + mmu-type = "power-embedded"; + }; +}; diff --git a/arch/powerpc/boot/dts/fsl/e500v2_power_isa.dtsi b/arch/powerpc/boot/dts/fsl/e500v2_power_isa.dtsi new file mode 100644 index 000000000..f4928144d --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/e500v2_power_isa.dtsi @@ -0,0 +1,52 @@ +/* + * e500v2 Power ISA Device Tree Source (include) + * + * Copyright 2012 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor "AS IS" AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +/ { + cpus { + power-isa-version = "2.03"; + power-isa-b; // Base + power-isa-e; // Embedded + power-isa-atb; // Alternate Time Base + power-isa-cs; // Cache Specification + power-isa-e.le; // Embedded.Little-Endian + power-isa-e.pm; // Embedded.Performance Monitor + power-isa-ecl; // Embedded Cache Locking + power-isa-mmc; // Memory Coherence + power-isa-sp; // Signal Processing Engine + power-isa-sp.fd; // SPE.Embedded Float Scalar Double + power-isa-sp.fs; // SPE.Embedded Float Scalar Single + power-isa-sp.fv; // SPE.Embedded Float Vector + mmu-type = "power-embedded"; + }; +}; diff --git a/arch/powerpc/boot/dts/fsl/e5500_power_isa.dtsi b/arch/powerpc/boot/dts/fsl/e5500_power_isa.dtsi new file mode 100644 index 000000000..c254c981a --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/e5500_power_isa.dtsi @@ -0,0 +1,60 @@ +/* + * e5500 Power ISA Device Tree Source (include) + * + * Copyright 2012 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor "AS IS" AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +/ { + cpus { + power-isa-version = "2.06"; + power-isa-b; // Base + power-isa-e; // Embedded + power-isa-atb; // Alternate Time Base + power-isa-cs; // Cache Specification + power-isa-ds; // Decorated Storage + power-isa-e.ed; // Embedded.Enhanced Debug + power-isa-e.pd; // Embedded.External PID + power-isa-e.hv; // Embedded.Hypervisor + power-isa-e.le; // Embedded.Little-Endian + power-isa-e.pm; // Embedded.Performance Monitor + power-isa-e.pc; // Embedded.Processor Control + power-isa-ecl; // Embedded Cache Locking + power-isa-exp; // External Proxy + power-isa-fp; // Floating Point + power-isa-fp.r; // Floating Point.Record + power-isa-mmc; // Memory Coherence + power-isa-scpm; // Store Conditional Page Mobility + power-isa-wt; // Wait + power-isa-64; // 64-bit + fsl,eref-deo; // Data Cache Extended Operations + mmu-type = "power-embedded"; + }; +}; diff --git a/arch/powerpc/boot/dts/fsl/e6500_power_isa.dtsi b/arch/powerpc/boot/dts/fsl/e6500_power_isa.dtsi new file mode 100644 index 000000000..a912dbeff --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/e6500_power_isa.dtsi @@ -0,0 +1,65 @@ +/* + * e6500 Power ISA Device Tree Source (include) + * + * Copyright 2013 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor "AS IS" AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +/ { + cpus { + power-isa-version = "2.06"; + power-isa-b; // Base + power-isa-e; // Embedded + power-isa-atb; // Alternate Time Base + power-isa-cs; // Cache Specification + power-isa-ds; // Decorated Storage + power-isa-e.ed; // Embedded.Enhanced Debug + power-isa-e.pd; // Embedded.External PID + power-isa-e.hv; // Embedded.Hypervisor + power-isa-e.le; // Embedded.Little-Endian + power-isa-e.pm; // Embedded.Performance Monitor + power-isa-e.pc; // Embedded.Processor Control + power-isa-ecl; // Embedded Cache Locking + power-isa-exp; // External Proxy + power-isa-fp; // Floating Point + power-isa-fp.r; // Floating Point.Record + power-isa-mmc; // Memory Coherence + power-isa-scpm; // Store Conditional Page Mobility + power-isa-wt; // Wait + power-isa-64; // 64-bit + power-isa-e.pt; // Embedded.Page Table + power-isa-e.hv.lrat; // Embedded.Hypervisor.LRAT + power-isa-e.em; // Embedded Multi-Threading + power-isa-v; // Vector (AltiVec) + fsl,eref-er; // Enhanced Reservations (Load and Reserve and Store Cond.) + fsl,eref-deo; // Data Cache Extended Operations + mmu-type = "power-embedded"; + }; +}; diff --git a/arch/powerpc/boot/dts/fsl/elo3-dma-0.dtsi b/arch/powerpc/boot/dts/fsl/elo3-dma-0.dtsi new file mode 100644 index 000000000..3c210e0d5 --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/elo3-dma-0.dtsi @@ -0,0 +1,82 @@ +/* + * QorIQ Elo3 DMA device tree stub [ controller @ offset 0x100000 ] + * + * Copyright 2013 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +dma0: dma@100300 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,elo3-dma"; + reg = <0x100300 0x4>, + <0x100600 0x4>; + ranges = <0x0 0x100100 0x500>; + dma-channel@0 { + compatible = "fsl,eloplus-dma-channel"; + reg = <0x0 0x80>; + interrupts = <28 2 0 0>; + }; + dma-channel@80 { + compatible = "fsl,eloplus-dma-channel"; + reg = <0x80 0x80>; + interrupts = <29 2 0 0>; + }; + dma-channel@100 { + compatible = "fsl,eloplus-dma-channel"; + reg = <0x100 0x80>; + interrupts = <30 2 0 0>; + }; + dma-channel@180 { + compatible = "fsl,eloplus-dma-channel"; + reg = <0x180 0x80>; + interrupts = <31 2 0 0>; + }; + dma-channel@300 { + compatible = "fsl,eloplus-dma-channel"; + reg = <0x300 0x80>; + interrupts = <76 2 0 0>; + }; + dma-channel@380 { + compatible = "fsl,eloplus-dma-channel"; + reg = <0x380 0x80>; + interrupts = <77 2 0 0>; + }; + dma-channel@400 { + compatible = "fsl,eloplus-dma-channel"; + reg = <0x400 0x80>; + interrupts = <78 2 0 0>; + }; + dma-channel@480 { + compatible = "fsl,eloplus-dma-channel"; + reg = <0x480 0x80>; + interrupts = <79 2 0 0>; + }; +}; diff --git a/arch/powerpc/boot/dts/fsl/elo3-dma-1.dtsi b/arch/powerpc/boot/dts/fsl/elo3-dma-1.dtsi new file mode 100644 index 000000000..cccf3bb38 --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/elo3-dma-1.dtsi @@ -0,0 +1,82 @@ +/* + * QorIQ Elo3 DMA device tree stub [ controller @ offset 0x101000 ] + * + * Copyright 2013 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +dma1: dma@101300 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,elo3-dma"; + reg = <0x101300 0x4>, + <0x101600 0x4>; + ranges = <0x0 0x101100 0x500>; + dma-channel@0 { + compatible = "fsl,eloplus-dma-channel"; + reg = <0x0 0x80>; + interrupts = <32 2 0 0>; + }; + dma-channel@80 { + compatible = "fsl,eloplus-dma-channel"; + reg = <0x80 0x80>; + interrupts = <33 2 0 0>; + }; + dma-channel@100 { + compatible = "fsl,eloplus-dma-channel"; + reg = <0x100 0x80>; + interrupts = <34 2 0 0>; + }; + dma-channel@180 { + compatible = "fsl,eloplus-dma-channel"; + reg = <0x180 0x80>; + interrupts = <35 2 0 0>; + }; + dma-channel@300 { + compatible = "fsl,eloplus-dma-channel"; + reg = <0x300 0x80>; + interrupts = <80 2 0 0>; + }; + dma-channel@380 { + compatible = "fsl,eloplus-dma-channel"; + reg = <0x380 0x80>; + interrupts = <81 2 0 0>; + }; + dma-channel@400 { + compatible = "fsl,eloplus-dma-channel"; + reg = <0x400 0x80>; + interrupts = <82 2 0 0>; + }; + dma-channel@480 { + compatible = "fsl,eloplus-dma-channel"; + reg = <0x480 0x80>; + interrupts = <83 2 0 0>; + }; +}; diff --git a/arch/powerpc/boot/dts/fsl/elo3-dma-2.dtsi b/arch/powerpc/boot/dts/fsl/elo3-dma-2.dtsi new file mode 100644 index 000000000..d3cc8d0f7 --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/elo3-dma-2.dtsi @@ -0,0 +1,82 @@ +/* + * QorIQ Elo3 DMA device tree stub [ controller @ offset 0x102300 ] + * + * Copyright 2013 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +dma2: dma@102300 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,elo3-dma"; + reg = <0x102300 0x4>, + <0x102600 0x4>; + ranges = <0x0 0x102100 0x500>; + dma-channel@0 { + compatible = "fsl,eloplus-dma-channel"; + reg = <0x0 0x80>; + interrupts = <464 2 0 0>; + }; + dma-channel@80 { + compatible = "fsl,eloplus-dma-channel"; + reg = <0x80 0x80>; + interrupts = <465 2 0 0>; + }; + dma-channel@100 { + compatible = "fsl,eloplus-dma-channel"; + reg = <0x100 0x80>; + interrupts = <466 2 0 0>; + }; + dma-channel@180 { + compatible = "fsl,eloplus-dma-channel"; + reg = <0x180 0x80>; + interrupts = <467 2 0 0>; + }; + dma-channel@300 { + compatible = "fsl,eloplus-dma-channel"; + reg = <0x300 0x80>; + interrupts = <468 2 0 0>; + }; + dma-channel@380 { + compatible = "fsl,eloplus-dma-channel"; + reg = <0x380 0x80>; + interrupts = <469 2 0 0>; + }; + dma-channel@400 { + compatible = "fsl,eloplus-dma-channel"; + reg = <0x400 0x80>; + interrupts = <470 2 0 0>; + }; + dma-channel@480 { + compatible = "fsl,eloplus-dma-channel"; + reg = <0x480 0x80>; + interrupts = <471 2 0 0>; + }; +}; diff --git a/arch/powerpc/boot/dts/fsl/interlaken-lac-portals.dtsi b/arch/powerpc/boot/dts/fsl/interlaken-lac-portals.dtsi new file mode 100644 index 000000000..9cffccf4e --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/interlaken-lac-portals.dtsi @@ -0,0 +1,156 @@ +/* T4240 Interlaken LAC Portal device tree stub with 24 portals. + * + * Copyright 2012 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor "AS IS" AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +#address-cells = <0x1>; +#size-cells = <0x1>; +compatible = "fsl,interlaken-lac-portals"; + +lportal0: lac-portal@0 { + compatible = "fsl,interlaken-lac-portal-v1.0"; + reg = <0x0 0x1000>; +}; + +lportal1: lac-portal@1000 { + compatible = "fsl,interlaken-lac-portal-v1.0"; + reg = <0x1000 0x1000>; +}; + +lportal2: lac-portal@2000 { + compatible = "fsl,interlaken-lac-portal-v1.0"; + reg = <0x2000 0x1000>; +}; + +lportal3: lac-portal@3000 { + compatible = "fsl,interlaken-lac-portal-v1.0"; + reg = <0x3000 0x1000>; +}; + +lportal4: lac-portal@4000 { + compatible = "fsl,interlaken-lac-portal-v1.0"; + reg = <0x4000 0x1000>; +}; + +lportal5: lac-portal@5000 { + compatible = "fsl,interlaken-lac-portal-v1.0"; + reg = <0x5000 0x1000>; +}; + +lportal6: lac-portal@6000 { + compatible = "fsl,interlaken-lac-portal-v1.0"; + reg = <0x6000 0x1000>; +}; + +lportal7: lac-portal@7000 { + compatible = "fsl,interlaken-lac-portal-v1.0"; + reg = <0x7000 0x1000>; +}; + +lportal8: lac-portal@8000 { + compatible = "fsl,interlaken-lac-portal-v1.0"; + reg = <0x8000 0x1000>; +}; + +lportal9: lac-portal@9000 { + compatible = "fsl,interlaken-lac-portal-v1.0"; + reg = <0x9000 0x1000>; +}; + +lportal10: lac-portal@A000 { + compatible = "fsl,interlaken-lac-portal-v1.0"; + reg = <0xA000 0x1000>; +}; + +lportal11: lac-portal@B000 { + compatible = "fsl,interlaken-lac-portal-v1.0"; + reg = <0xB000 0x1000>; +}; + +lportal12: lac-portal@C000 { + compatible = "fsl,interlaken-lac-portal-v1.0"; + reg = <0xC000 0x1000>; +}; + +lportal13: lac-portal@D000 { + compatible = "fsl,interlaken-lac-portal-v1.0"; + reg = <0xD000 0x1000>; +}; + +lportal14: lac-portal@E000 { + compatible = "fsl,interlaken-lac-portal-v1.0"; + reg = <0xE000 0x1000>; +}; + +lportal15: lac-portal@F000 { + compatible = "fsl,interlaken-lac-portal-v1.0"; + reg = <0xF000 0x1000>; +}; + +lportal16: lac-portal@10000 { + compatible = "fsl,interlaken-lac-portal-v1.0"; + reg = <0x10000 0x1000>; +}; + +lportal17: lac-portal@11000 { + compatible = "fsl,interlaken-lac-portal-v1.0"; + reg = <0x11000 0x1000>; +}; + +lportal18: lac-portal@1200 { + compatible = "fsl,interlaken-lac-portal-v1.0"; + reg = <0x12000 0x1000>; +}; + +lportal19: lac-portal@13000 { + compatible = "fsl,interlaken-lac-portal-v1.0"; + reg = <0x13000 0x1000>; +}; + +lportal20: lac-portal@14000 { + compatible = "fsl,interlaken-lac-portal-v1.0"; + reg = <0x14000 0x1000>; +}; + +lportal21: lac-portal@15000 { + compatible = "fsl,interlaken-lac-portal-v1.0"; + reg = <0x15000 0x1000>; +}; + +lportal22: lac-portal@16000 { + compatible = "fsl,interlaken-lac-portal-v1.0"; + reg = <0x16000 0x1000>; +}; + +lportal23: lac-portal@17000 { + compatible = "fsl,interlaken-lac-portal-v1.0"; + reg = <0x17000 0x1000>; +}; diff --git a/arch/powerpc/boot/dts/fsl/interlaken-lac.dtsi b/arch/powerpc/boot/dts/fsl/interlaken-lac.dtsi new file mode 100644 index 000000000..e8208720a --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/interlaken-lac.dtsi @@ -0,0 +1,45 @@ +/* + * T4 Interlaken Look-aside Controller (LAC) device tree stub + * + * Copyright 2012 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor "AS IS" AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +lac: lac@229000 { + compatible = "fsl,interlaken-lac"; + reg = <0x229000 0x1000>; + interrupts = <16 2 1 18>; +}; + +lac-hv@228000 { + compatible = "fsl,interlaken-lac-hv"; + reg = <0x228000 0x1000>; + fsl,non-hv-node = <&lac>; +}; diff --git a/arch/powerpc/boot/dts/fsl/mpc8536si-post.dtsi b/arch/powerpc/boot/dts/fsl/mpc8536si-post.dtsi new file mode 100644 index 000000000..c8b2daa40 --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/mpc8536si-post.dtsi @@ -0,0 +1,252 @@ +/* + * MPC8536 Silicon/SoC Device Tree Source (post include) + * + * Copyright 2011 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +&lbc { + #address-cells = <2>; + #size-cells = <1>; + compatible = "fsl,mpc8536-elbc", "fsl,elbc", "simple-bus"; + interrupts = <19 2 0 0>; +}; + +/* controller at 0x8000 */ +&pci0 { + compatible = "fsl,mpc8540-pci"; + device_type = "pci"; + interrupts = <24 0x2 0 0>; + bus-range = <0 0xff>; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; +}; + +/* controller at 0x9000 */ +&pci1 { + compatible = "fsl,mpc8548-pcie"; + device_type = "pci"; + #size-cells = <2>; + #address-cells = <3>; + bus-range = <0 255>; + clock-frequency = <33333333>; + interrupts = <25 2 0 0>; + + pcie@0 { + reg = <0 0 0 0 0>; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + device_type = "pci"; + interrupts = <25 2 0 0>; + interrupt-map-mask = <0xf800 0 0 7>; + + interrupt-map = < + /* IDSEL 0x0 */ + 0000 0x0 0x0 0x1 &mpic 0x4 0x1 0x0 0x0 + 0000 0x0 0x0 0x2 &mpic 0x5 0x1 0x0 0x0 + 0000 0x0 0x0 0x3 &mpic 0x6 0x1 0x0 0x0 + 0000 0x0 0x0 0x4 &mpic 0x7 0x1 0x0 0x0 + >; + }; +}; + +/* controller at 0xa000 */ +&pci2 { + compatible = "fsl,mpc8548-pcie"; + device_type = "pci"; + #size-cells = <2>; + #address-cells = <3>; + bus-range = <0 255>; + clock-frequency = <33333333>; + interrupts = <26 2 0 0>; + + pcie@0 { + reg = <0 0 0 0 0>; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + device_type = "pci"; + interrupts = <26 2 0 0>; + interrupt-map-mask = <0xf800 0 0 7>; + interrupt-map = < + /* IDSEL 0x0 */ + 0000 0x0 0x0 0x1 &mpic 0x0 0x1 0x0 0x0 + 0000 0x0 0x0 0x2 &mpic 0x1 0x1 0x0 0x0 + 0000 0x0 0x0 0x3 &mpic 0x2 0x1 0x0 0x0 + 0000 0x0 0x0 0x4 &mpic 0x3 0x1 0x0 0x0 + >; + }; +}; + +/* controller at 0xb000 */ +&pci3 { + compatible = "fsl,mpc8548-pcie"; + device_type = "pci"; + #size-cells = <2>; + #address-cells = <3>; + bus-range = <0 255>; + clock-frequency = <33333333>; + interrupts = <27 2 0 0>; + + pcie@0 { + reg = <0 0 0 0 0>; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + device_type = "pci"; + interrupts = <27 2 0 0>; + interrupt-map-mask = <0xf800 0 0 7>; + interrupt-map = < + /* IDSEL 0x0 */ + 0000 0x0 0x0 0x1 &mpic 0x8 0x1 0x0 0x0 + 0000 0x0 0x0 0x2 &mpic 0x9 0x1 0x0 0x0 + 0000 0x0 0x0 0x3 &mpic 0xa 0x1 0x0 0x0 + 0000 0x0 0x0 0x4 &mpic 0xb 0x1 0x0 0x0 + >; + }; +}; +&soc { + #address-cells = <1>; + #size-cells = <1>; + device_type = "soc"; + compatible = "fsl,mpc8536-immr", "simple-bus"; + bus-frequency = <0>; // Filled out by uboot. + + ecm-law@0 { + compatible = "fsl,ecm-law"; + reg = <0x0 0x1000>; + fsl,num-laws = <12>; + }; + + ecm@1000 { + compatible = "fsl,mpc8536-ecm", "fsl,ecm"; + reg = <0x1000 0x1000>; + interrupts = <17 2 0 0>; + }; + + memory-controller@2000 { + compatible = "fsl,mpc8536-memory-controller"; + reg = <0x2000 0x1000>; + interrupts = <18 2 0 0>; + }; + +/include/ "pq3-i2c-0.dtsi" +/include/ "pq3-i2c-1.dtsi" +/include/ "pq3-duart-0.dtsi" + +/include/ "pq3-espi-0.dtsi" + spi@7000 { + fsl,espi-num-chipselects = <4>; + }; + +/include/ "pq3-gpio-0.dtsi" + + /* mark compat w/8572 to get some erratum treatment */ + gpio-controller@f000 { + compatible = "fsl,mpc8572-gpio", "fsl,pq3-gpio"; + }; + + sata@18000 { + compatible = "fsl,mpc8536-sata", "fsl,pq-sata"; + reg = <0x18000 0x1000>; + cell-index = <1>; + interrupts = <74 0x2 0 0>; + }; + + sata@19000 { + compatible = "fsl,mpc8536-sata", "fsl,pq-sata"; + reg = <0x19000 0x1000>; + cell-index = <2>; + interrupts = <41 0x2 0 0>; + }; + + L2: l2-cache-controller@20000 { + compatible = "fsl,mpc8536-l2-cache-controller"; + reg = <0x20000 0x1000>; + cache-line-size = <32>; // 32 bytes + cache-size = <0x80000>; // L2, 512K + interrupts = <16 2 0 0>; + }; + +/include/ "pq3-dma-0.dtsi" +/include/ "pq3-etsec1-0.dtsi" +/include/ "pq3-etsec1-timer-0.dtsi" + + usb@22000 { + compatible = "fsl-usb2-mph-v1.2", "fsl,mpc8536-usb2-mph", "fsl-usb2-mph"; + reg = <0x22000 0x1000>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <28 0x2 0 0>; + }; + + usb@23000 { + compatible = "fsl-usb2-mph-v1.2", "fsl,mpc8536-usb2-mph", "fsl-usb2-mph"; + reg = <0x23000 0x1000>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <46 0x2 0 0>; + }; + + ptp_clock@24e00 { + interrupts = <68 2 0 0 69 2 0 0 70 2 0 0 71 2 0 0>; + }; + +/include/ "pq3-etsec1-2.dtsi" + + ethernet@26000 { + cell-index = <1>; + }; + + usb@2b000 { + compatible = "fsl,mpc8536-usb2-dr", "fsl-usb2-dr"; + reg = <0x2b000 0x1000>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <60 0x2 0 0>; + }; + +/include/ "pq3-esdhc-0.dtsi" + sdhc@2e000 { + compatible = "fsl,mpc8536-esdhc", "fsl,esdhc"; + }; + +/include/ "pq3-sec3.0-0.dtsi" +/include/ "pq3-mpic.dtsi" +/include/ "pq3-mpic-timer-B.dtsi" + + global-utilities@e0000 { + compatible = "fsl,mpc8536-guts"; + reg = <0xe0000 0x1000>; + fsl,has-rstcr; + }; +}; diff --git a/arch/powerpc/boot/dts/fsl/mpc8536si-pre.dtsi b/arch/powerpc/boot/dts/fsl/mpc8536si-pre.dtsi new file mode 100644 index 000000000..152906f98 --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/mpc8536si-pre.dtsi @@ -0,0 +1,66 @@ +/* + * MPC8536 Silicon/SoC Device Tree Source (pre include) + * + * Copyright 2011 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +/dts-v1/; + +/include/ "e500v2_power_isa.dtsi" + +/ { + compatible = "fsl,MPC8536"; + #address-cells = <2>; + #size-cells = <2>; + interrupt-parent = <&mpic>; + + aliases { + serial0 = &serial0; + serial1 = &serial1; + ethernet0 = &enet0; + ethernet1 = &enet2; + pci0 = &pci0; + pci1 = &pci1; + pci2 = &pci2; + pci3 = &pci3; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + PowerPC,8536@0 { + device_type = "cpu"; + reg = <0x0>; + next-level-cache = <&L2>; + }; + }; +}; diff --git a/arch/powerpc/boot/dts/fsl/mpc8544si-post.dtsi b/arch/powerpc/boot/dts/fsl/mpc8544si-post.dtsi new file mode 100644 index 000000000..b68eb119f --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/mpc8544si-post.dtsi @@ -0,0 +1,191 @@ +/* + * MPC8544 Silicon/SoC Device Tree Source (post include) + * + * Copyright 2011 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +&lbc { + #address-cells = <2>; + #size-cells = <1>; + compatible = "fsl,mpc8544-lbc", "fsl,pq3-localbus", "simple-bus"; + interrupts = <19 2 0 0>; +}; + +/* controller at 0x8000 */ +&pci0 { + compatible = "fsl,mpc8540-pci"; + device_type = "pci"; + interrupts = <24 0x2 0 0>; + bus-range = <0 0xff>; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; +}; + +/* controller at 0x9000 */ +&pci1 { + compatible = "fsl,mpc8548-pcie"; + device_type = "pci"; + #size-cells = <2>; + #address-cells = <3>; + bus-range = <0 255>; + clock-frequency = <33333333>; + interrupts = <25 2 0 0>; + + pcie@0 { + reg = <0 0 0 0 0>; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + device_type = "pci"; + interrupts = <25 2 0 0>; + interrupt-map-mask = <0xf800 0 0 7>; + + interrupt-map = < + /* IDSEL 0x0 */ + 0000 0x0 0x0 0x1 &mpic 0x4 0x1 0x0 0x0 + 0000 0x0 0x0 0x2 &mpic 0x5 0x1 0x0 0x0 + 0000 0x0 0x0 0x3 &mpic 0x6 0x1 0x0 0x0 + 0000 0x0 0x0 0x4 &mpic 0x7 0x1 0x0 0x0 + >; + }; +}; + +/* controller at 0xa000 */ +&pci2 { + compatible = "fsl,mpc8548-pcie"; + device_type = "pci"; + #size-cells = <2>; + #address-cells = <3>; + bus-range = <0 255>; + clock-frequency = <33333333>; + interrupts = <26 2 0 0>; + + pcie@0 { + reg = <0 0 0 0 0>; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + device_type = "pci"; + interrupts = <26 2 0 0>; + interrupt-map-mask = <0xf800 0 0 7>; + interrupt-map = < + /* IDSEL 0x0 */ + 0000 0x0 0x0 0x1 &mpic 0x0 0x1 0x0 0x0 + 0000 0x0 0x0 0x2 &mpic 0x1 0x1 0x0 0x0 + 0000 0x0 0x0 0x3 &mpic 0x2 0x1 0x0 0x0 + 0000 0x0 0x0 0x4 &mpic 0x3 0x1 0x0 0x0 + >; + }; +}; + +/* controller at 0xb000 */ +&pci3 { + compatible = "fsl,mpc8548-pcie"; + device_type = "pci"; + #size-cells = <2>; + #address-cells = <3>; + bus-range = <0 255>; + clock-frequency = <33333333>; + interrupts = <27 2 0 0>; + + pcie@0 { + reg = <0 0 0 0 0>; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + device_type = "pci"; + interrupts = <27 2 0 0>; + interrupt-map-mask = <0xf800 0 0 7>; + interrupt-map = < + /* IDSEL 0x0 */ + 0000 0x0 0x0 0x1 &mpic 0x8 0x1 0x0 0x0 + 0000 0x0 0x0 0x2 &mpic 0x9 0x1 0x0 0x0 + 0000 0x0 0x0 0x3 &mpic 0xa 0x1 0x0 0x0 + 0000 0x0 0x0 0x4 &mpic 0xb 0x1 0x0 0x0 + >; + }; +}; + +&soc { + #address-cells = <1>; + #size-cells = <1>; + device_type = "soc"; + compatible = "fsl,mpc8544-immr", "simple-bus"; + bus-frequency = <0>; // Filled out by uboot. + + ecm-law@0 { + compatible = "fsl,ecm-law"; + reg = <0x0 0x1000>; + fsl,num-laws = <10>; + }; + + ecm@1000 { + compatible = "fsl,mpc8544-ecm", "fsl,ecm"; + reg = <0x1000 0x1000>; + interrupts = <17 2 0 0>; + }; + + memory-controller@2000 { + compatible = "fsl,mpc8544-memory-controller"; + reg = <0x2000 0x1000>; + interrupts = <18 2 0 0>; + }; + +/include/ "pq3-i2c-0.dtsi" +/include/ "pq3-i2c-1.dtsi" +/include/ "pq3-duart-0.dtsi" + + L2: l2-cache-controller@20000 { + compatible = "fsl,mpc8544-l2-cache-controller"; + reg = <0x20000 0x1000>; + cache-line-size = <32>; // 32 bytes + cache-size = <0x40000>; // L2, 256K + interrupts = <16 2 0 0>; + }; + +/include/ "pq3-dma-0.dtsi" +/include/ "pq3-etsec1-0.dtsi" +/include/ "pq3-etsec1-2.dtsi" + + ethernet@26000 { + cell-index = <1>; + }; + +/include/ "pq3-sec2.1-0.dtsi" +/include/ "pq3-mpic.dtsi" + + global-utilities@e0000 { + compatible = "fsl,mpc8544-guts"; + reg = <0xe0000 0x1000>; + fsl,has-rstcr; + }; +}; diff --git a/arch/powerpc/boot/dts/fsl/mpc8544si-pre.dtsi b/arch/powerpc/boot/dts/fsl/mpc8544si-pre.dtsi new file mode 100644 index 000000000..5a69bafb6 --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/mpc8544si-pre.dtsi @@ -0,0 +1,66 @@ +/* + * MPC8544 Silicon/SoC Device Tree Source (pre include) + * + * Copyright 2011 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +/dts-v1/; + +/include/ "e500v2_power_isa.dtsi" + +/ { + compatible = "fsl,MPC8544"; + #address-cells = <2>; + #size-cells = <2>; + interrupt-parent = <&mpic>; + + aliases { + serial0 = &serial0; + serial1 = &serial1; + ethernet0 = &enet0; + ethernet1 = &enet2; + pci0 = &pci0; + pci1 = &pci1; + pci2 = &pci2; + pci3 = &pci3; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + PowerPC,8544@0 { + device_type = "cpu"; + reg = <0x0>; + next-level-cache = <&L2>; + }; + }; +}; diff --git a/arch/powerpc/boot/dts/fsl/mpc8548si-post.dtsi b/arch/powerpc/boot/dts/fsl/mpc8548si-post.dtsi new file mode 100644 index 000000000..579d76cb8 --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/mpc8548si-post.dtsi @@ -0,0 +1,159 @@ +/* + * MPC8548 Silicon/SoC Device Tree Source (post include) + * + * Copyright 2011 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +&lbc { + #address-cells = <2>; + #size-cells = <1>; + compatible = "fsl,mpc8548-lbc", "fsl,pq3-localbus", "simple-bus"; + interrupts = <19 2 0 0>; +}; + +/* controller at 0x8000 */ +&pci0 { + compatible = "fsl,mpc8540-pcix", "fsl,mpc8540-pci"; + device_type = "pci"; + interrupts = <24 0x2 0 0>; + bus-range = <0 0xff>; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; +}; + +/* controller at 0x9000 */ +&pci1 { + compatible = "fsl,mpc8540-pci"; + device_type = "pci"; + interrupts = <25 0x2 0 0>; + bus-range = <0 0xff>; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; +}; + +/* controller at 0xa000 */ +&pci2 { + compatible = "fsl,mpc8548-pcie"; + device_type = "pci"; + #size-cells = <2>; + #address-cells = <3>; + bus-range = <0 255>; + clock-frequency = <33333333>; + interrupts = <26 2 0 0>; + + pcie@0 { + reg = <0 0 0 0 0>; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + device_type = "pci"; + interrupts = <26 2 0 0>; + interrupt-map-mask = <0xf800 0 0 7>; + interrupt-map = < + /* IDSEL 0x0 */ + 0000 0x0 0x0 0x1 &mpic 0x0 0x1 0x0 0x0 + 0000 0x0 0x0 0x2 &mpic 0x1 0x1 0x0 0x0 + 0000 0x0 0x0 0x3 &mpic 0x2 0x1 0x0 0x0 + 0000 0x0 0x0 0x4 &mpic 0x3 0x1 0x0 0x0 + >; + }; +}; + +&rio { + compatible = "fsl,srio"; + interrupts = <48 2 0 0>; + #address-cells = <2>; + #size-cells = <2>; + fsl,srio-rmu-handle = <&rmu>; + ranges; + + port1 { + #address-cells = <2>; + #size-cells = <2>; + cell-index = <1>; + }; +}; + +&soc { + #address-cells = <1>; + #size-cells = <1>; + device_type = "soc"; + compatible = "fsl,mpc8548-immr", "simple-bus"; + bus-frequency = <0>; // Filled out by uboot. + + ecm-law@0 { + compatible = "fsl,ecm-law"; + reg = <0x0 0x1000>; + fsl,num-laws = <10>; + }; + + ecm@1000 { + compatible = "fsl,mpc8548-ecm", "fsl,ecm"; + reg = <0x1000 0x1000>; + interrupts = <17 2 0 0>; + }; + + memory-controller@2000 { + compatible = "fsl,mpc8548-memory-controller"; + reg = <0x2000 0x1000>; + interrupts = <18 2 0 0>; + }; + +/include/ "pq3-i2c-0.dtsi" +/include/ "pq3-i2c-1.dtsi" +/include/ "pq3-duart-0.dtsi" + + L2: l2-cache-controller@20000 { + compatible = "fsl,mpc8548-l2-cache-controller"; + reg = <0x20000 0x1000>; + cache-line-size = <32>; // 32 bytes + cache-size = <0x80000>; // L2, 512K + interrupts = <16 2 0 0>; + }; + +/include/ "pq3-dma-0.dtsi" +/include/ "pq3-etsec1-0.dtsi" +/include/ "pq3-etsec1-1.dtsi" +/include/ "pq3-etsec1-2.dtsi" +/include/ "pq3-etsec1-3.dtsi" + +/include/ "pq3-sec2.1-0.dtsi" +/include/ "pq3-mpic.dtsi" +/include/ "pq3-rmu-0.dtsi" + + global-utilities@e0000 { + compatible = "fsl,mpc8548-guts"; + reg = <0xe0000 0x1000>; + fsl,has-rstcr; + }; +}; diff --git a/arch/powerpc/boot/dts/fsl/mpc8548si-pre.dtsi b/arch/powerpc/boot/dts/fsl/mpc8548si-pre.dtsi new file mode 100644 index 000000000..fc1ce9774 --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/mpc8548si-pre.dtsi @@ -0,0 +1,67 @@ +/* + * MPC8548 Silicon/SoC Device Tree Source (pre include) + * + * Copyright 2011 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +/dts-v1/; + +/include/ "e500v2_power_isa.dtsi" + +/ { + compatible = "fsl,MPC8548"; + #address-cells = <2>; + #size-cells = <2>; + interrupt-parent = <&mpic>; + + aliases { + serial0 = &serial0; + serial1 = &serial1; + ethernet0 = &enet0; + ethernet1 = &enet1; + ethernet2 = &enet2; + ethernet3 = &enet3; + pci0 = &pci0; + pci1 = &pci1; + pci2 = &pci2; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + PowerPC,8548@0 { + device_type = "cpu"; + reg = <0x0>; + next-level-cache = <&L2>; + }; + }; +}; diff --git a/arch/powerpc/boot/dts/fsl/mpc8568si-post.dtsi b/arch/powerpc/boot/dts/fsl/mpc8568si-post.dtsi new file mode 100644 index 000000000..64e7075a9 --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/mpc8568si-post.dtsi @@ -0,0 +1,270 @@ +/* + * MPC8568 Silicon/SoC Device Tree Source (post include) + * + * Copyright 2011 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +&lbc { + #address-cells = <2>; + #size-cells = <1>; + compatible = "fsl,mpc8568-localbus", "fsl,pq3-localbus", "simple-bus"; + interrupts = <19 2 0 0>; + sleep = <&pmc 0x08000000>; +}; + +/* controller at 0x8000 */ +&pci0 { + compatible = "fsl,mpc8540-pci"; + device_type = "pci"; + interrupts = <24 0x2 0 0>; + bus-range = <0 0xff>; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + sleep = <&pmc 0x80000000>; +}; + +/* controller at 0xa000 */ +&pci1 { + compatible = "fsl,mpc8548-pcie"; + device_type = "pci"; + #size-cells = <2>; + #address-cells = <3>; + bus-range = <0 255>; + clock-frequency = <33333333>; + interrupts = <26 2 0 0>; + sleep = <&pmc 0x20000000>; + + pcie@0 { + reg = <0 0 0 0 0>; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + device_type = "pci"; + interrupts = <26 2 0 0>; + interrupt-map-mask = <0xf800 0 0 7>; + interrupt-map = < + /* IDSEL 0x0 */ + 0000 0x0 0x0 0x1 &mpic 0x0 0x1 0x0 0x0 + 0000 0x0 0x0 0x2 &mpic 0x1 0x1 0x0 0x0 + 0000 0x0 0x0 0x3 &mpic 0x2 0x1 0x0 0x0 + 0000 0x0 0x0 0x4 &mpic 0x3 0x1 0x0 0x0 + >; + }; +}; + +&rio { + compatible = "fsl,srio"; + interrupts = <48 2 0 0>; + #address-cells = <2>; + #size-cells = <2>; + fsl,srio-rmu-handle = <&rmu>; + sleep = <&pmc 0x00080000>; + ranges; + + port1 { + #address-cells = <2>; + #size-cells = <2>; + cell-index = <1>; + }; +}; + +&soc { + #address-cells = <1>; + #size-cells = <1>; + device_type = "soc"; + compatible = "fsl,mpc8568-immr", "simple-bus"; + bus-frequency = <0>; // Filled out by uboot. + + ecm-law@0 { + compatible = "fsl,ecm-law"; + reg = <0x0 0x1000>; + fsl,num-laws = <10>; + }; + + ecm@1000 { + compatible = "fsl,mpc8568-ecm", "fsl,ecm"; + reg = <0x1000 0x1000>; + interrupts = <17 2 0 0>; + }; + + memory-controller@2000 { + compatible = "fsl,mpc8568-memory-controller"; + reg = <0x2000 0x1000>; + interrupts = <18 2 0 0>; + }; + + i2c-sleep-nexus { + #address-cells = <1>; + #size-cells = <1>; + compatible = "simple-bus"; + sleep = <&pmc 0x00000004>; + ranges; + +/include/ "pq3-i2c-0.dtsi" +/include/ "pq3-i2c-1.dtsi" + + }; + + duart-sleep-nexus { + #address-cells = <1>; + #size-cells = <1>; + compatible = "simple-bus"; + sleep = <&pmc 0x00000002>; + ranges; + +/include/ "pq3-duart-0.dtsi" + + }; + + L2: l2-cache-controller@20000 { + compatible = "fsl,mpc8568-l2-cache-controller"; + reg = <0x20000 0x1000>; + cache-line-size = <32>; // 32 bytes + cache-size = <0x80000>; // L2, 512K + interrupts = <16 2 0 0>; + }; + +/include/ "pq3-dma-0.dtsi" + dma@21300 { + sleep = <&pmc 0x00000400>; + }; + +/include/ "pq3-etsec1-0.dtsi" + ethernet@24000 { + sleep = <&pmc 0x00000080>; + }; + +/include/ "pq3-etsec1-1.dtsi" + ethernet@25000 { + sleep = <&pmc 0x00000040>; + }; + + par_io@e0100 { + reg = <0xe0100 0x100>; + device_type = "par_io"; + }; + +/include/ "pq3-sec2.1-0.dtsi" + crypto@30000 { + sleep = <&pmc 0x01000000>; + }; + +/include/ "pq3-mpic.dtsi" +/include/ "pq3-rmu-0.dtsi" + rmu@d3000 { + sleep = <&pmc 0x00040000>; + }; + + global-utilities@e0000 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,mpc8568-guts", "fsl,mpc8548-guts"; + reg = <0xe0000 0x1000>; + ranges = <0 0xe0000 0x1000>; + fsl,has-rstcr; + + pmc: power@70 { + compatible = "fsl,mpc8568-pmc", + "fsl,mpc8548-pmc"; + reg = <0x70 0x20>; + }; + }; +}; + +&qe { + #address-cells = <1>; + #size-cells = <1>; + device_type = "qe"; + compatible = "fsl,qe"; + sleep = <&pmc 0x00000800>; + brg-frequency = <0>; + bus-frequency = <396000000>; + fsl,qe-num-riscs = <2>; + fsl,qe-num-snums = <28>; + + qeic: interrupt-controller@80 { + interrupt-controller; + compatible = "fsl,qe-ic"; + #address-cells = <0>; + #interrupt-cells = <1>; + reg = <0x80 0x80>; + interrupts = <46 2 0 0 46 2 0 0>; //high:30 low:30 + interrupt-parent = <&mpic>; + }; + + spi@4c0 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,spi"; + reg = <0x4c0 0x40>; + cell-index = <0>; + interrupts = <2>; + interrupt-parent = <&qeic>; + }; + + spi@500 { + #address-cells = <1>; + #size-cells = <0>; + cell-index = <1>; + compatible = "fsl,spi"; + reg = <0x500 0x40>; + interrupts = <1>; + interrupt-parent = <&qeic>; + }; + + ucc@2000 { + cell-index = <1>; + reg = <0x2000 0x200>; + interrupts = <32>; + interrupt-parent = <&qeic>; + }; + + ucc@3000 { + cell-index = <2>; + reg = <0x3000 0x200>; + interrupts = <33>; + interrupt-parent = <&qeic>; + }; + + muram@10000 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,qe-muram", "fsl,cpm-muram"; + ranges = <0x0 0x10000 0x10000>; + + data-only@0 { + compatible = "fsl,qe-muram-data", + "fsl,cpm-muram-data"; + reg = <0x0 0x10000>; + }; + }; +}; diff --git a/arch/powerpc/boot/dts/fsl/mpc8568si-pre.dtsi b/arch/powerpc/boot/dts/fsl/mpc8568si-pre.dtsi new file mode 100644 index 000000000..122ca3bd0 --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/mpc8568si-pre.dtsi @@ -0,0 +1,68 @@ +/* + * MPC8568 Silicon/SoC Device Tree Source (pre include) + * + * Copyright 2011 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +/dts-v1/; + +/include/ "e500v2_power_isa.dtsi" + +/ { + compatible = "fsl,MPC8568"; + #address-cells = <2>; + #size-cells = <2>; + interrupt-parent = <&mpic>; + + aliases { + serial0 = &serial0; + serial1 = &serial1; + ethernet0 = &enet0; + ethernet1 = &enet1; + ethernet2 = &enet2; + ethernet3 = &enet3; + pci0 = &pci0; + pci1 = &pci1; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + PowerPC,8568@0 { + device_type = "cpu"; + reg = <0x0>; + next-level-cache = <&L2>; + sleep = <&pmc 0x00008000 // core + &pmc 0x00004000>; // timebase + }; + }; +}; diff --git a/arch/powerpc/boot/dts/fsl/mpc8569si-post.dtsi b/arch/powerpc/boot/dts/fsl/mpc8569si-post.dtsi new file mode 100644 index 000000000..3e6346a4a --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/mpc8569si-post.dtsi @@ -0,0 +1,304 @@ +/* + * MPC8569 Silicon/SoC Device Tree Source (post include) + * + * Copyright 2011 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +&lbc { + #address-cells = <2>; + #size-cells = <1>; + compatible = "fsl,mpc8569-elbc", "fsl,elbc", "simple-bus"; + interrupts = <19 2 0 0>; + sleep = <&pmc 0x08000000>; +}; + +/* controller at 0xa000 */ +&pci1 { + compatible = "fsl,mpc8548-pcie"; + device_type = "pci"; + #size-cells = <2>; + #address-cells = <3>; + bus-range = <0 255>; + clock-frequency = <33333333>; + interrupts = <26 2 0 0>; + sleep = <&pmc 0x20000000>; + + pcie@0 { + reg = <0 0 0 0 0>; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + device_type = "pci"; + interrupts = <26 2 0 0>; + interrupt-map-mask = <0xf800 0 0 7>; + interrupt-map = < + /* IDSEL 0x0 */ + 0000 0x0 0x0 0x1 &mpic 0x0 0x1 0x0 0x0 + 0000 0x0 0x0 0x2 &mpic 0x1 0x1 0x0 0x0 + 0000 0x0 0x0 0x3 &mpic 0x2 0x1 0x0 0x0 + 0000 0x0 0x0 0x4 &mpic 0x3 0x1 0x0 0x0 + >; + }; +}; + +&rio { + compatible = "fsl,srio"; + interrupts = <48 2 0 0>; + #address-cells = <2>; + #size-cells = <2>; + fsl,srio-rmu-handle = <&rmu>; + sleep = <&pmc 0x00080000>; + ranges; + + port1 { + #address-cells = <2>; + #size-cells = <2>; + cell-index = <1>; + }; + + port2 { + #address-cells = <2>; + #size-cells = <2>; + cell-index = <2>; + }; +}; + +&soc { + #address-cells = <1>; + #size-cells = <1>; + device_type = "soc"; + compatible = "fsl,mpc8569-immr", "simple-bus"; + bus-frequency = <0>; // Filled out by uboot. + + ecm-law@0 { + compatible = "fsl,ecm-law"; + reg = <0x0 0x1000>; + fsl,num-laws = <10>; + }; + + ecm@1000 { + compatible = "fsl,mpc8569-ecm", "fsl,ecm"; + reg = <0x1000 0x1000>; + interrupts = <17 2 0 0>; + }; + + memory-controller@2000 { + compatible = "fsl,mpc8569-memory-controller"; + reg = <0x2000 0x1000>; + interrupts = <18 2 0 0>; + }; + + i2c-sleep-nexus { + #address-cells = <1>; + #size-cells = <1>; + compatible = "simple-bus"; + sleep = <&pmc 0x00000004>; + ranges; + +/include/ "pq3-i2c-0.dtsi" +/include/ "pq3-i2c-1.dtsi" + + }; + + duart-sleep-nexus { + #address-cells = <1>; + #size-cells = <1>; + compatible = "simple-bus"; + sleep = <&pmc 0x00000002>; + ranges; + +/include/ "pq3-duart-0.dtsi" + + }; + + L2: l2-cache-controller@20000 { + compatible = "fsl,mpc8569-l2-cache-controller"; + reg = <0x20000 0x1000>; + cache-line-size = <32>; // 32 bytes + cache-size = <0x80000>; // L2, 512K + interrupts = <16 2 0 0>; + }; + +/include/ "pq3-dma-0.dtsi" +/include/ "pq3-esdhc-0.dtsi" + sdhc@2e000 { + sleep = <&pmc 0x00200000>; + }; + + par_io@e0100 { + #address-cells = <1>; + #size-cells = <1>; + reg = <0xe0100 0x100>; + ranges = <0x0 0xe0100 0x100>; + device_type = "par_io"; + }; + +/include/ "pq3-sec3.1-0.dtsi" + crypto@30000 { + sleep = <&pmc 0x01000000>; + }; + +/include/ "pq3-mpic.dtsi" +/include/ "pq3-rmu-0.dtsi" + rmu@d3000 { + sleep = <&pmc 0x00040000>; + }; + + global-utilities@e0000 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,mpc8569-guts", "fsl,mpc8548-guts"; + reg = <0xe0000 0x1000>; + ranges = <0 0xe0000 0x1000>; + fsl,has-rstcr; + + pmc: power@70 { + compatible = "fsl,mpc8569-pmc", + "fsl,mpc8548-pmc"; + reg = <0x70 0x20>; + }; + }; +}; + +&qe { + #address-cells = <1>; + #size-cells = <1>; + device_type = "qe"; + compatible = "fsl,qe"; + sleep = <&pmc 0x00000800>; + brg-frequency = <0>; + bus-frequency = <0>; + fsl,qe-num-riscs = <4>; + fsl,qe-num-snums = <46>; + + qeic: interrupt-controller@80 { + interrupt-controller; + compatible = "fsl,qe-ic"; + #address-cells = <0>; + #interrupt-cells = <1>; + reg = <0x80 0x80>; + interrupts = <46 2 0 0 46 2 0 0>; //high:30 low:30 + interrupt-parent = <&mpic>; + }; + + timer@440 { + compatible = "fsl,mpc8569-qe-gtm", + "fsl,qe-gtm", "fsl,gtm"; + reg = <0x440 0x40>; + interrupts = <12 13 14 15>; + interrupt-parent = <&qeic>; + /* Filled in by U-Boot */ + clock-frequency = <0>; + }; + + spi@4c0 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,mpc8569-qe-spi", "fsl,spi"; + reg = <0x4c0 0x40>; + cell-index = <0>; + interrupts = <2>; + interrupt-parent = <&qeic>; + }; + + spi@500 { + #address-cells = <1>; + #size-cells = <0>; + cell-index = <1>; + compatible = "fsl,spi"; + reg = <0x500 0x40>; + interrupts = <1>; + interrupt-parent = <&qeic>; + }; + + usb@6c0 { + compatible = "fsl,mpc8569-qe-usb", + "fsl,mpc8323-qe-usb"; + reg = <0x6c0 0x40 0x8b00 0x100>; + interrupts = <11>; + interrupt-parent = <&qeic>; + }; + + ucc@2000 { + cell-index = <1>; + reg = <0x2000 0x200>; + interrupts = <32>; + interrupt-parent = <&qeic>; + }; + + ucc@2200 { + cell-index = <3>; + reg = <0x2200 0x200>; + interrupts = <34>; + interrupt-parent = <&qeic>; + }; + + ucc@3000 { + cell-index = <2>; + reg = <0x3000 0x200>; + interrupts = <33>; + interrupt-parent = <&qeic>; + }; + + ucc@3200 { + cell-index = <4>; + reg = <0x3200 0x200>; + interrupts = <35>; + interrupt-parent = <&qeic>; + }; + + ucc@3400 { + cell-index = <6>; + reg = <0x3400 0x200>; + interrupts = <41>; + interrupt-parent = <&qeic>; + }; + + ucc@3600 { + cell-index = <8>; + reg = <0x3600 0x200>; + interrupts = <43>; + interrupt-parent = <&qeic>; + }; + + muram@10000 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,qe-muram", "fsl,cpm-muram"; + ranges = <0x0 0x10000 0x20000>; + + data-only@0 { + compatible = "fsl,qe-muram-data", + "fsl,cpm-muram-data"; + reg = <0x0 0x20000>; + }; + }; +}; diff --git a/arch/powerpc/boot/dts/fsl/mpc8569si-pre.dtsi b/arch/powerpc/boot/dts/fsl/mpc8569si-pre.dtsi new file mode 100644 index 000000000..2cd15a2a0 --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/mpc8569si-pre.dtsi @@ -0,0 +1,67 @@ +/* + * MPC8569 Silicon/SoC Device Tree Source (pre include) + * + * Copyright 2011 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +/dts-v1/; + +/include/ "e500v2_power_isa.dtsi" + +/ { + compatible = "fsl,MPC8569"; + #address-cells = <2>; + #size-cells = <2>; + interrupt-parent = <&mpic>; + + aliases { + serial0 = &serial0; + serial1 = &serial1; + ethernet0 = &enet0; + ethernet1 = &enet1; + ethernet2 = &enet2; + ethernet3 = &enet3; + pci1 = &pci1; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + PowerPC,8569@0 { + device_type = "cpu"; + reg = <0x0>; + next-level-cache = <&L2>; + sleep = <&pmc 0x00008000 // core + &pmc 0x00004000>; // timebase + }; + }; +}; diff --git a/arch/powerpc/boot/dts/fsl/mpc8572si-post.dtsi b/arch/powerpc/boot/dts/fsl/mpc8572si-post.dtsi new file mode 100644 index 000000000..d44e25a48 --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/mpc8572si-post.dtsi @@ -0,0 +1,196 @@ +/* + * MPC8572 Silicon/SoC Device Tree Source (post include) + * + * Copyright 2011 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +&lbc { + #address-cells = <2>; + #size-cells = <1>; + compatible = "fsl,mpc8572-elbc", "fsl,elbc", "simple-bus"; + interrupts = <19 2 0 0>; +}; + +/* controller at 0x8000 */ +&pci0 { + compatible = "fsl,mpc8548-pcie"; + device_type = "pci"; + #size-cells = <2>; + #address-cells = <3>; + bus-range = <0 255>; + clock-frequency = <33333333>; + interrupts = <24 2 0 0>; + + pcie@0 { + reg = <0 0 0 0 0>; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + device_type = "pci"; + interrupts = <24 2 0 0>; + interrupt-map-mask = <0xf800 0 0 7>; + + interrupt-map = < + /* IDSEL 0x0 */ + 0000 0x0 0x0 0x1 &mpic 0x8 0x1 0x0 0x0 + 0000 0x0 0x0 0x2 &mpic 0x9 0x1 0x0 0x0 + 0000 0x0 0x0 0x3 &mpic 0xa 0x1 0x0 0x0 + 0000 0x0 0x0 0x4 &mpic 0xb 0x1 0x0 0x0 + >; + }; +}; + +/* controller at 0x9000 */ +&pci1 { + compatible = "fsl,mpc8548-pcie"; + device_type = "pci"; + #size-cells = <2>; + #address-cells = <3>; + bus-range = <0 255>; + clock-frequency = <33333333>; + interrupts = <25 2 0 0>; + + pcie@0 { + reg = <0 0 0 0 0>; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + device_type = "pci"; + interrupts = <25 2 0 0>; + interrupt-map-mask = <0xf800 0 0 7>; + + interrupt-map = < + /* IDSEL 0x0 */ + 0000 0x0 0x0 0x1 &mpic 0x4 0x1 0x0 0x0 + 0000 0x0 0x0 0x2 &mpic 0x5 0x1 0x0 0x0 + 0000 0x0 0x0 0x3 &mpic 0x6 0x1 0x0 0x0 + 0000 0x0 0x0 0x4 &mpic 0x7 0x1 0x0 0x0 + >; + }; +}; + +/* controller at 0xa000 */ +&pci2 { + compatible = "fsl,mpc8548-pcie"; + device_type = "pci"; + #size-cells = <2>; + #address-cells = <3>; + bus-range = <0 255>; + clock-frequency = <33333333>; + interrupts = <26 2 0 0>; + + pcie@0 { + reg = <0 0 0 0 0>; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + device_type = "pci"; + interrupts = <26 2 0 0>; + interrupt-map-mask = <0xf800 0 0 7>; + interrupt-map = < + /* IDSEL 0x0 */ + 0000 0x0 0x0 0x1 &mpic 0x0 0x1 0x0 0x0 + 0000 0x0 0x0 0x2 &mpic 0x1 0x1 0x0 0x0 + 0000 0x0 0x0 0x3 &mpic 0x2 0x1 0x0 0x0 + 0000 0x0 0x0 0x4 &mpic 0x3 0x1 0x0 0x0 + >; + }; +}; + +&soc { + #address-cells = <1>; + #size-cells = <1>; + device_type = "soc"; + compatible = "fsl,mpc8572-immr", "simple-bus"; + bus-frequency = <0>; // Filled out by uboot. + + ecm-law@0 { + compatible = "fsl,ecm-law"; + reg = <0x0 0x1000>; + fsl,num-laws = <12>; + }; + + ecm@1000 { + compatible = "fsl,mpc8572-ecm", "fsl,ecm"; + reg = <0x1000 0x1000>; + interrupts = <17 2 0 0>; + }; + + memory-controller@2000 { + compatible = "fsl,mpc8572-memory-controller"; + reg = <0x2000 0x1000>; + interrupts = <18 2 0 0>; + }; + + memory-controller@6000 { + compatible = "fsl,mpc8572-memory-controller"; + reg = <0x6000 0x1000>; + interrupts = <18 2 0 0>; + }; + +/include/ "pq3-i2c-0.dtsi" +/include/ "pq3-i2c-1.dtsi" +/include/ "pq3-duart-0.dtsi" +/include/ "pq3-dma-1.dtsi" +/include/ "pq3-gpio-0.dtsi" + gpio-controller@f000 { + compatible = "fsl,mpc8572-gpio", "fsl,pq3-gpio"; + }; + + L2: l2-cache-controller@20000 { + compatible = "fsl,mpc8572-l2-cache-controller"; + reg = <0x20000 0x1000>; + cache-line-size = <32>; // 32 bytes + cache-size = <0x100000>; // L2,1M + interrupts = <16 2 0 0>; + }; + +/include/ "pq3-dma-0.dtsi" +/include/ "pq3-etsec1-0.dtsi" +/include/ "pq3-etsec1-timer-0.dtsi" + + ptp_clock@24e00 { + interrupts = <68 2 0 0 69 2 0 0 70 2 0 0 71 2 0 0>; + }; + +/include/ "pq3-etsec1-1.dtsi" +/include/ "pq3-etsec1-2.dtsi" +/include/ "pq3-etsec1-3.dtsi" +/include/ "pq3-sec3.0-0.dtsi" +/include/ "pq3-mpic.dtsi" +/include/ "pq3-mpic-timer-B.dtsi" + + global-utilities@e0000 { + compatible = "fsl,mpc8572-guts"; + reg = <0xe0000 0x1000>; + fsl,has-rstcr; + }; +}; diff --git a/arch/powerpc/boot/dts/fsl/mpc8572si-pre.dtsi b/arch/powerpc/boot/dts/fsl/mpc8572si-pre.dtsi new file mode 100644 index 000000000..28c2a862b --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/mpc8572si-pre.dtsi @@ -0,0 +1,73 @@ +/* + * MPC8572 Silicon/SoC Device Tree Source (pre include) + * + * Copyright 2011 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +/dts-v1/; + +/include/ "e500v2_power_isa.dtsi" + +/ { + compatible = "fsl,MPC8572"; + #address-cells = <2>; + #size-cells = <2>; + interrupt-parent = <&mpic>; + + aliases { + serial0 = &serial0; + serial1 = &serial1; + ethernet0 = &enet0; + ethernet1 = &enet1; + ethernet2 = &enet2; + ethernet3 = &enet3; + pci0 = &pci0; + pci1 = &pci1; + pci2 = &pci2; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + PowerPC,8572@0 { + device_type = "cpu"; + reg = <0x0>; + next-level-cache = <&L2>; + }; + + PowerPC,8572@1 { + device_type = "cpu"; + reg = <0x1>; + next-level-cache = <&L2>; + }; + }; +}; diff --git a/arch/powerpc/boot/dts/fsl/p1010si-post.dtsi b/arch/powerpc/boot/dts/fsl/p1010si-post.dtsi new file mode 100644 index 000000000..af12ead88 --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/p1010si-post.dtsi @@ -0,0 +1,202 @@ +/* + * P1010/P1014 Silicon/SoC Device Tree Source (post include) + * + * Copyright 2011 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +&ifc { + #address-cells = <2>; + #size-cells = <1>; + compatible = "fsl,ifc", "simple-bus"; + interrupts = <16 2 0 0 19 2 0 0>; +}; + +/* controller at 0x9000 */ +&pci0 { + compatible = "fsl,p1010-pcie", "fsl,qoriq-pcie-v2.3"; + device_type = "pci"; + #size-cells = <2>; + #address-cells = <3>; + bus-range = <0 255>; + clock-frequency = <33333333>; + interrupts = <16 2 0 0>; + + pcie@0 { + reg = <0 0 0 0 0>; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + device_type = "pci"; + interrupts = <16 2 0 0>; + interrupt-map-mask = <0xf800 0 0 7>; + interrupt-map = < + /* IDSEL 0x0 */ + 0000 0x0 0x0 0x1 &mpic 0x4 0x1 0x0 0x0 + 0000 0x0 0x0 0x2 &mpic 0x5 0x1 0x0 0x0 + 0000 0x0 0x0 0x3 &mpic 0x6 0x1 0x0 0x0 + 0000 0x0 0x0 0x4 &mpic 0x7 0x1 0x0 0x0 + >; + }; +}; + +/* controller at 0xa000 */ +&pci1 { + compatible = "fsl,p1010-pcie", "fsl,qoriq-pcie-v2.3"; + device_type = "pci"; + #size-cells = <2>; + #address-cells = <3>; + bus-range = <0 255>; + clock-frequency = <33333333>; + interrupts = <16 2 0 0>; + + pcie@0 { + reg = <0 0 0 0 0>; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + device_type = "pci"; + interrupts = <16 2 0 0>; + interrupt-map-mask = <0xf800 0 0 7>; + + interrupt-map = < + /* IDSEL 0x0 */ + 0000 0x0 0x0 0x1 &mpic 0x0 0x1 0x0 0x0 + 0000 0x0 0x0 0x2 &mpic 0x1 0x1 0x0 0x0 + 0000 0x0 0x0 0x3 &mpic 0x2 0x1 0x0 0x0 + 0000 0x0 0x0 0x4 &mpic 0x3 0x1 0x0 0x0 + >; + }; +}; + +&soc { + #address-cells = <1>; + #size-cells = <1>; + device_type = "soc"; + compatible = "fsl,p1010-immr", "simple-bus"; + bus-frequency = <0>; // Filled out by uboot. + + ecm-law@0 { + compatible = "fsl,ecm-law"; + reg = <0x0 0x1000>; + fsl,num-laws = <12>; + }; + + ecm@1000 { + compatible = "fsl,p1010-ecm", "fsl,ecm"; + reg = <0x1000 0x1000>; + interrupts = <16 2 0 0>; + }; + + memory-controller@2000 { + compatible = "fsl,p1010-memory-controller"; + reg = <0x2000 0x1000>; + interrupts = <16 2 0 0>; + }; + +/include/ "pq3-i2c-0.dtsi" +/include/ "pq3-i2c-1.dtsi" +/include/ "pq3-duart-0.dtsi" +/include/ "pq3-espi-0.dtsi" + spi0: spi@7000 { + fsl,espi-num-chipselects = <1>; + }; + +/include/ "pq3-gpio-0.dtsi" +/include/ "pq3-sata2-0.dtsi" +/include/ "pq3-sata2-1.dtsi" + + can0: can@1c000 { + compatible = "fsl,p1010-flexcan"; + reg = <0x1c000 0x1000>; + interrupts = <48 0x2 0 0>; + }; + + can1: can@1d000 { + compatible = "fsl,p1010-flexcan"; + reg = <0x1d000 0x1000>; + interrupts = <61 0x2 0 0>; + }; + + L2: l2-cache-controller@20000 { + compatible = "fsl,p1010-l2-cache-controller", + "fsl,p1014-l2-cache-controller"; + reg = <0x20000 0x1000>; + cache-line-size = <32>; // 32 bytes + cache-size = <0x40000>; // L2,256K + interrupts = <16 2 0 0>; + }; + +/include/ "pq3-dma-0.dtsi" +/include/ "pq3-usb2-dr-0.dtsi" + usb@22000 { + compatible = "fsl-usb2-dr-v1.6", "fsl-usb2-dr"; + }; +/include/ "pq3-esdhc-0.dtsi" + sdhc@2e000 { + compatible = "fsl,p1010-esdhc", "fsl,esdhc"; + sdhci,auto-cmd12; + }; + +/include/ "pq3-sec4.4-0.dtsi" +/include/ "pq3-mpic.dtsi" +/include/ "pq3-mpic-timer-B.dtsi" + +/include/ "pq3-etsec2-0.dtsi" + enet0: ethernet@b0000 { + queue-group@b0000 { + fsl,rx-bit-map = <0xff>; + fsl,tx-bit-map = <0xff>; + }; + }; + +/include/ "pq3-etsec2-1.dtsi" + enet1: ethernet@b1000 { + queue-group@b1000 { + fsl,rx-bit-map = <0xff>; + fsl,tx-bit-map = <0xff>; + }; + }; + +/include/ "pq3-etsec2-2.dtsi" + enet2: ethernet@b2000 { + queue-group@b2000 { + fsl,rx-bit-map = <0xff>; + fsl,tx-bit-map = <0xff>; + }; + + }; + + global-utilities@e0000 { + compatible = "fsl,p1010-guts"; + reg = <0xe0000 0x1000>; + fsl,has-rstcr; + }; +}; diff --git a/arch/powerpc/boot/dts/fsl/p1010si-pre.dtsi b/arch/powerpc/boot/dts/fsl/p1010si-pre.dtsi new file mode 100644 index 000000000..6e76f9b28 --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/p1010si-pre.dtsi @@ -0,0 +1,67 @@ +/* + * P1010/P1014 Silicon/SoC Device Tree Source (pre include) + * + * Copyright 2011 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +/dts-v1/; + +/include/ "e500v2_power_isa.dtsi" + +/ { + compatible = "fsl,P1010"; + #address-cells = <2>; + #size-cells = <2>; + interrupt-parent = <&mpic>; + + aliases { + serial0 = &serial0; + serial1 = &serial1; + ethernet0 = &enet0; + ethernet1 = &enet1; + ethernet2 = &enet2; + pci0 = &pci0; + pci1 = &pci1; + can0 = &can0; + can1 = &can1; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + PowerPC,P1010@0 { + device_type = "cpu"; + reg = <0x0>; + next-level-cache = <&L2>; + }; + }; +}; diff --git a/arch/powerpc/boot/dts/fsl/p1020si-post.dtsi b/arch/powerpc/boot/dts/fsl/p1020si-post.dtsi new file mode 100644 index 000000000..642dc3a83 --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/p1020si-post.dtsi @@ -0,0 +1,185 @@ +/* + * P1020/P1011 Silicon/SoC Device Tree Source (post include) + * + * Copyright 2011 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +&lbc { + #address-cells = <2>; + #size-cells = <1>; + compatible = "fsl,p1020-elbc", "fsl,elbc", "simple-bus"; + interrupts = <19 2 0 0>, + <16 2 0 0>; +}; + +/* controller at 0x9000 */ +&pci0 { + compatible = "fsl,mpc8548-pcie"; + device_type = "pci"; + #size-cells = <2>; + #address-cells = <3>; + bus-range = <0 255>; + clock-frequency = <33333333>; + interrupts = <16 2 0 0>; + + pcie@0 { + reg = <0 0 0 0 0>; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + device_type = "pci"; + interrupts = <16 2 0 0>; + interrupt-map-mask = <0xf800 0 0 7>; + interrupt-map = < + /* IDSEL 0x0 */ + 0000 0x0 0x0 0x1 &mpic 0x4 0x1 0x0 0x0 + 0000 0x0 0x0 0x2 &mpic 0x5 0x1 0x0 0x0 + 0000 0x0 0x0 0x3 &mpic 0x6 0x1 0x0 0x0 + 0000 0x0 0x0 0x4 &mpic 0x7 0x1 0x0 0x0 + >; + }; +}; + +/* controller at 0xa000 */ +&pci1 { + compatible = "fsl,mpc8548-pcie"; + device_type = "pci"; + #size-cells = <2>; + #address-cells = <3>; + bus-range = <0 255>; + clock-frequency = <33333333>; + interrupts = <16 2 0 0>; + + pcie@0 { + reg = <0 0 0 0 0>; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + device_type = "pci"; + interrupts = <16 2 0 0>; + interrupt-map-mask = <0xf800 0 0 7>; + + interrupt-map = < + /* IDSEL 0x0 */ + 0000 0x0 0x0 0x1 &mpic 0x0 0x1 0x0 0x0 + 0000 0x0 0x0 0x2 &mpic 0x1 0x1 0x0 0x0 + 0000 0x0 0x0 0x3 &mpic 0x2 0x1 0x0 0x0 + 0000 0x0 0x0 0x4 &mpic 0x3 0x1 0x0 0x0 + >; + }; +}; + +&soc { + #address-cells = <1>; + #size-cells = <1>; + device_type = "soc"; + compatible = "fsl,p1020-immr", "simple-bus"; + bus-frequency = <0>; // Filled out by uboot. + + ecm-law@0 { + compatible = "fsl,ecm-law"; + reg = <0x0 0x1000>; + fsl,num-laws = <12>; + }; + + ecm@1000 { + compatible = "fsl,p1020-ecm", "fsl,ecm"; + reg = <0x1000 0x1000>; + interrupts = <16 2 0 0>; + }; + + memory-controller@2000 { + compatible = "fsl,p1020-memory-controller"; + reg = <0x2000 0x1000>; + interrupts = <16 2 0 0>; + }; + +/include/ "pq3-i2c-0.dtsi" +/include/ "pq3-i2c-1.dtsi" +/include/ "pq3-duart-0.dtsi" + +/include/ "pq3-espi-0.dtsi" + spi@7000 { + fsl,espi-num-chipselects = <4>; + }; + +/include/ "pq3-gpio-0.dtsi" + + L2: l2-cache-controller@20000 { + compatible = "fsl,p1020-l2-cache-controller"; + reg = <0x20000 0x1000>; + cache-line-size = <32>; // 32 bytes + cache-size = <0x40000>; // L2,256K + interrupts = <16 2 0 0>; + }; + +/include/ "pq3-dma-0.dtsi" +/include/ "pq3-usb2-dr-0.dtsi" + usb@22000 { + compatible = "fsl-usb2-dr-v1.6", "fsl-usb2-dr"; + }; +/include/ "pq3-usb2-dr-1.dtsi" + usb@23000 { + compatible = "fsl-usb2-dr-v1.6", "fsl-usb2-dr"; + }; + +/include/ "pq3-esdhc-0.dtsi" + sdhc@2e000 { + compatible = "fsl,p1020-esdhc", "fsl,esdhc"; + sdhci,auto-cmd12; + }; +/include/ "pq3-sec3.3-0.dtsi" + +/include/ "pq3-mpic.dtsi" +/include/ "pq3-mpic-timer-B.dtsi" + +/include/ "pq3-etsec2-0.dtsi" + enet0: enet0_grp2: ethernet@b0000 { + }; + +/include/ "pq3-etsec2-1.dtsi" + enet1: enet1_grp2: ethernet@b1000 { + }; + +/include/ "pq3-etsec2-2.dtsi" + enet2: enet2_grp2: ethernet@b2000 { + }; + + global-utilities@e0000 { + compatible = "fsl,p1020-guts"; + reg = <0xe0000 0x1000>; + fsl,has-rstcr; + }; +}; + +/include/ "pq3-etsec2-grp2-0.dtsi" +/include/ "pq3-etsec2-grp2-1.dtsi" +/include/ "pq3-etsec2-grp2-2.dtsi" diff --git a/arch/powerpc/boot/dts/fsl/p1020si-pre.dtsi b/arch/powerpc/boot/dts/fsl/p1020si-pre.dtsi new file mode 100644 index 000000000..fed9c4c8d --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/p1020si-pre.dtsi @@ -0,0 +1,71 @@ +/* + * P1020/P1011 Silicon/SoC Device Tree Source (pre include) + * + * Copyright 2011 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +/dts-v1/; + +/include/ "e500v2_power_isa.dtsi" + +/ { + compatible = "fsl,P1020"; + #address-cells = <2>; + #size-cells = <2>; + interrupt-parent = <&mpic>; + + aliases { + serial0 = &serial0; + serial1 = &serial1; + ethernet0 = &enet0; + ethernet1 = &enet1; + ethernet2 = &enet2; + pci0 = &pci0; + pci1 = &pci1; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + PowerPC,P1020@0 { + device_type = "cpu"; + reg = <0x0>; + next-level-cache = <&L2>; + }; + + PowerPC,P1020@1 { + device_type = "cpu"; + reg = <0x1>; + next-level-cache = <&L2>; + }; + }; +}; diff --git a/arch/powerpc/boot/dts/fsl/p1021si-post.dtsi b/arch/powerpc/boot/dts/fsl/p1021si-post.dtsi new file mode 100644 index 000000000..407cb5fd0 --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/p1021si-post.dtsi @@ -0,0 +1,247 @@ +/* + * P1021/P1012 Silicon/SoC Device Tree Source (post include) + * + * Copyright 2011-2012 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +&lbc { + #address-cells = <2>; + #size-cells = <1>; + compatible = "fsl,p1021-elbc", "fsl,elbc", "simple-bus"; + interrupts = <19 2 0 0>, + <16 2 0 0>; +}; + +/* controller at 0x9000 */ +&pci0 { + compatible = "fsl,mpc8548-pcie"; + device_type = "pci"; + #size-cells = <2>; + #address-cells = <3>; + bus-range = <0 255>; + clock-frequency = <33333333>; + interrupts = <16 2 0 0>; + + pcie@0 { + reg = <0 0 0 0 0>; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + device_type = "pci"; + interrupts = <16 2 0 0>; + interrupt-map-mask = <0xf800 0 0 7>; + interrupt-map = < + /* IDSEL 0x0 */ + 0000 0x0 0x0 0x1 &mpic 0x4 0x1 0x0 0x0 + 0000 0x0 0x0 0x2 &mpic 0x5 0x1 0x0 0x0 + 0000 0x0 0x0 0x3 &mpic 0x6 0x1 0x0 0x0 + 0000 0x0 0x0 0x4 &mpic 0x7 0x1 0x0 0x0 + >; + }; +}; + +/* controller at 0xa000 */ +&pci1 { + compatible = "fsl,mpc8548-pcie"; + device_type = "pci"; + #size-cells = <2>; + #address-cells = <3>; + bus-range = <0 255>; + clock-frequency = <33333333>; + interrupts = <16 2 0 0>; + + pcie@0 { + reg = <0 0 0 0 0>; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + device_type = "pci"; + interrupts = <16 2 0 0>; + interrupt-map-mask = <0xf800 0 0 7>; + + interrupt-map = < + /* IDSEL 0x0 */ + 0000 0x0 0x0 0x1 &mpic 0x0 0x1 0x0 0x0 + 0000 0x0 0x0 0x2 &mpic 0x1 0x1 0x0 0x0 + 0000 0x0 0x0 0x3 &mpic 0x2 0x1 0x0 0x0 + 0000 0x0 0x0 0x4 &mpic 0x3 0x1 0x0 0x0 + >; + }; +}; + +&soc { + #address-cells = <1>; + #size-cells = <1>; + device_type = "soc"; + compatible = "fsl,p1021-immr", "simple-bus"; + bus-frequency = <0>; // Filled out by uboot. + + ecm-law@0 { + compatible = "fsl,ecm-law"; + reg = <0x0 0x1000>; + fsl,num-laws = <12>; + }; + + ecm@1000 { + compatible = "fsl,p1021-ecm", "fsl,ecm"; + reg = <0x1000 0x1000>; + interrupts = <16 2 0 0>; + }; + + memory-controller@2000 { + compatible = "fsl,p1021-memory-controller"; + reg = <0x2000 0x1000>; + interrupts = <16 2 0 0>; + }; + +/include/ "pq3-i2c-0.dtsi" +/include/ "pq3-i2c-1.dtsi" +/include/ "pq3-duart-0.dtsi" + +/include/ "pq3-espi-0.dtsi" + spi@7000 { + fsl,espi-num-chipselects = <4>; + }; + +/include/ "pq3-gpio-0.dtsi" + + L2: l2-cache-controller@20000 { + compatible = "fsl,p1021-l2-cache-controller"; + reg = <0x20000 0x1000>; + cache-line-size = <32>; // 32 bytes + cache-size = <0x40000>; // L2,256K + interrupts = <16 2 0 0>; + }; + +/include/ "pq3-dma-0.dtsi" +/include/ "pq3-usb2-dr-0.dtsi" + usb@22000 { + compatible = "fsl-usb2-dr-v1.6", "fsl-usb2-dr"; + }; + +/include/ "pq3-esdhc-0.dtsi" + sdhc@2e000 { + sdhci,auto-cmd12; + }; + +/include/ "pq3-sec3.3-0.dtsi" + +/include/ "pq3-mpic.dtsi" +/include/ "pq3-mpic-timer-B.dtsi" + +/include/ "pq3-etsec2-0.dtsi" + enet0: enet0_grp2: ethernet@b0000 { + }; + +/include/ "pq3-etsec2-1.dtsi" + enet1: enet1_grp2: ethernet@b1000 { + }; + +/include/ "pq3-etsec2-2.dtsi" + enet2: enet2_grp2: ethernet@b2000 { + }; + + global-utilities@e0000 { + compatible = "fsl,p1021-guts"; + reg = <0xe0000 0x1000>; + fsl,has-rstcr; + }; +}; + +&qe { + #address-cells = <1>; + #size-cells = <1>; + device_type = "qe"; + compatible = "fsl,qe"; + fsl,qe-num-riscs = <1>; + fsl,qe-num-snums = <28>; + + qeic: interrupt-controller@80 { + interrupt-controller; + compatible = "fsl,qe-ic"; + #address-cells = <0>; + #interrupt-cells = <1>; + reg = <0x80 0x80>; + interrupts = <63 2 0 0 60 2 0 0>; //high:47 low:44 + }; + + ucc@2000 { + cell-index = <1>; + reg = <0x2000 0x200>; + interrupts = <32>; + interrupt-parent = <&qeic>; + }; + + mdio@2120 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x2120 0x18>; + compatible = "fsl,ucc-mdio"; + }; + + ucc@2400 { + cell-index = <5>; + reg = <0x2400 0x200>; + interrupts = <40>; + interrupt-parent = <&qeic>; + }; + + ucc@2600 { + cell-index = <7>; + reg = <0x2600 0x200>; + interrupts = <42>; + interrupt-parent = <&qeic>; + }; + + ucc@2200 { + cell-index = <3>; + reg = <0x2200 0x200>; + interrupts = <34>; + interrupt-parent = <&qeic>; + }; + + muram@10000 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,qe-muram", "fsl,cpm-muram"; + ranges = <0x0 0x10000 0x6000>; + + data-only@0 { + compatible = "fsl,qe-muram-data", + "fsl,cpm-muram-data"; + reg = <0x0 0x6000>; + }; + }; +}; + +/include/ "pq3-etsec2-grp2-0.dtsi" +/include/ "pq3-etsec2-grp2-1.dtsi" +/include/ "pq3-etsec2-grp2-2.dtsi" diff --git a/arch/powerpc/boot/dts/fsl/p1021si-pre.dtsi b/arch/powerpc/boot/dts/fsl/p1021si-pre.dtsi new file mode 100644 index 000000000..36161b500 --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/p1021si-pre.dtsi @@ -0,0 +1,71 @@ +/* + * P1021/P1012 Silicon/SoC Device Tree Source (pre include) + * + * Copyright 2011 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +/dts-v1/; + +/include/ "e500v2_power_isa.dtsi" + +/ { + compatible = "fsl,P1021"; + #address-cells = <2>; + #size-cells = <2>; + interrupt-parent = <&mpic>; + + aliases { + serial0 = &serial0; + serial1 = &serial1; + ethernet0 = &enet0; + ethernet1 = &enet1; + ethernet2 = &enet2; + pci0 = &pci0; + pci1 = &pci1; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + PowerPC,P1021@0 { + device_type = "cpu"; + reg = <0x0>; + next-level-cache = <&L2>; + }; + + PowerPC,P1021@1 { + device_type = "cpu"; + reg = <0x1>; + next-level-cache = <&L2>; + }; + }; +}; diff --git a/arch/powerpc/boot/dts/fsl/p1022si-post.dtsi b/arch/powerpc/boot/dts/fsl/p1022si-post.dtsi new file mode 100644 index 000000000..ebf202234 --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/p1022si-post.dtsi @@ -0,0 +1,247 @@ +/* + * P1022/P1013 Silicon/SoC Device Tree Source (post include) + * + * Copyright 2011 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +&lbc { + #address-cells = <2>; + #size-cells = <1>; + /* + * The localbus on the P1022 is not a simple-bus because of the eLBC + * pin muxing when the DIU is enabled. + */ + compatible = "fsl,p1022-elbc", "fsl,elbc"; + interrupts = <19 2 0 0>, + <16 2 0 0>; +}; + +/* controller at 0x9000 */ +&pci0 { + compatible = "fsl,mpc8548-pcie"; + device_type = "pci"; + #size-cells = <2>; + #address-cells = <3>; + bus-range = <0 255>; + clock-frequency = <33333333>; + interrupts = <16 2 0 0>; + + pcie@0 { + reg = <0 0 0 0 0>; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + device_type = "pci"; + interrupts = <16 2 0 0>; + interrupt-map-mask = <0xf800 0 0 7>; + interrupt-map = < + /* IDSEL 0x0 */ + 0000 0x0 0x0 0x1 &mpic 0x4 0x1 0x0 0x0 + 0000 0x0 0x0 0x2 &mpic 0x5 0x1 0x0 0x0 + 0000 0x0 0x0 0x3 &mpic 0x6 0x1 0x0 0x0 + 0000 0x0 0x0 0x4 &mpic 0x7 0x1 0x0 0x0 + >; + }; +}; + +/* controller at 0xa000 */ +&pci1 { + compatible = "fsl,mpc8548-pcie"; + device_type = "pci"; + #size-cells = <2>; + #address-cells = <3>; + bus-range = <0 255>; + clock-frequency = <33333333>; + interrupts = <16 2 0 0>; + + pcie@0 { + reg = <0 0 0 0 0>; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + device_type = "pci"; + interrupts = <16 2 0 0>; + interrupt-map-mask = <0xf800 0 0 7>; + + interrupt-map = < + /* IDSEL 0x0 */ + 0000 0x0 0x0 0x1 &mpic 0x0 0x1 0x0 0x0 + 0000 0x0 0x0 0x2 &mpic 0x1 0x1 0x0 0x0 + 0000 0x0 0x0 0x3 &mpic 0x2 0x1 0x0 0x0 + 0000 0x0 0x0 0x4 &mpic 0x3 0x1 0x0 0x0 + >; + }; +}; + +/* controller at 0xb000 */ +&pci2 { + compatible = "fsl,mpc8548-pcie"; + device_type = "pci"; + #size-cells = <2>; + #address-cells = <3>; + bus-range = <0 255>; + clock-frequency = <33333333>; + interrupts = <16 2 0 0>; + + pcie@0 { + reg = <0 0 0 0 0>; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + device_type = "pci"; + interrupts = <16 2 0 0>; + interrupt-map-mask = <0xf800 0 0 7>; + + interrupt-map = < + /* IDSEL 0x0 */ + 0000 0x0 0x0 0x1 &mpic 0x8 0x1 0x0 0x0 + 0000 0x0 0x0 0x2 &mpic 0x9 0x1 0x0 0x0 + 0000 0x0 0x0 0x3 &mpic 0xa 0x1 0x0 0x0 + 0000 0x0 0x0 0x4 &mpic 0xb 0x1 0x0 0x0 + >; + }; +}; + +&soc { + #address-cells = <1>; + #size-cells = <1>; + device_type = "soc"; + compatible = "fsl,p1022-immr", "simple-bus"; + bus-frequency = <0>; // Filled out by uboot. + + ecm-law@0 { + compatible = "fsl,ecm-law"; + reg = <0x0 0x1000>; + fsl,num-laws = <12>; + }; + + ecm@1000 { + compatible = "fsl,p1022-ecm", "fsl,ecm"; + reg = <0x1000 0x1000>; + interrupts = <16 2 0 0>; + }; + + memory-controller@2000 { + compatible = "fsl,p1022-memory-controller"; + reg = <0x2000 0x1000>; + interrupts = <16 2 0 0>; + }; + +/include/ "pq3-i2c-0.dtsi" +/include/ "pq3-i2c-1.dtsi" +/include/ "pq3-duart-0.dtsi" +/include/ "pq3-espi-0.dtsi" + spi@7000 { + fsl,espi-num-chipselects = <4>; + }; + +/include/ "pq3-dma-1.dtsi" + dma@c300 { + dma00: dma-channel@0 { + compatible = "fsl,ssi-dma-channel"; + }; + dma01: dma-channel@80 { + compatible = "fsl,ssi-dma-channel"; + }; + }; + +/include/ "pq3-gpio-0.dtsi" + + display@10000 { + compatible = "fsl,diu", "fsl,p1022-diu"; + reg = <0x10000 1000>; + interrupts = <64 2 0 0>; + }; + + ssi@15000 { + compatible = "fsl,mpc8610-ssi"; + cell-index = <0>; + reg = <0x15000 0x100>; + interrupts = <75 2 0 0>; + fsl,playback-dma = <&dma00>; + fsl,capture-dma = <&dma01>; + fsl,fifo-depth = <15>; + }; + +/include/ "pq3-sata2-0.dtsi" +/include/ "pq3-sata2-1.dtsi" + + L2: l2-cache-controller@20000 { + compatible = "fsl,p1022-l2-cache-controller"; + reg = <0x20000 0x1000>; + cache-line-size = <32>; // 32 bytes + cache-size = <0x40000>; // L2,256K + interrupts = <16 2 0 0>; + }; + +/include/ "pq3-dma-0.dtsi" +/include/ "pq3-usb2-dr-0.dtsi" + usb@22000 { + compatible = "fsl-usb2-dr-v1.6", "fsl-usb2-dr"; + }; +/include/ "pq3-usb2-dr-1.dtsi" + usb@23000 { + compatible = "fsl-usb2-dr-v1.6", "fsl-usb2-dr"; + }; + +/include/ "pq3-esdhc-0.dtsi" + sdhc@2e000 { + compatible = "fsl,p1022-esdhc", "fsl,esdhc"; + sdhci,auto-cmd12; + }; + +/include/ "pq3-sec3.3-0.dtsi" +/include/ "pq3-mpic.dtsi" +/include/ "pq3-mpic-timer-B.dtsi" + +/include/ "pq3-etsec2-0.dtsi" + enet0: enet0_grp2: ethernet@b0000 { + }; + +/include/ "pq3-etsec2-1.dtsi" + enet1: enet1_grp2: ethernet@b1000 { + }; + + global-utilities@e0000 { + compatible = "fsl,p1022-guts"; + reg = <0xe0000 0x1000>; + fsl,has-rstcr; + }; + + power@e0070{ + compatible = "fsl,mpc8536-pmc", "fsl,mpc8548-pmc"; + reg = <0xe0070 0x20>; + }; + +}; + +/include/ "pq3-etsec2-grp2-0.dtsi" +/include/ "pq3-etsec2-grp2-1.dtsi" diff --git a/arch/powerpc/boot/dts/fsl/p1022si-pre.dtsi b/arch/powerpc/boot/dts/fsl/p1022si-pre.dtsi new file mode 100644 index 000000000..1956dea04 --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/p1022si-pre.dtsi @@ -0,0 +1,71 @@ +/* + * P1022/P1013 Silicon/SoC Device Tree Source (pre include) + * + * Copyright 2011 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +/dts-v1/; + +/include/ "e500v2_power_isa.dtsi" + +/ { + compatible = "fsl,P1022"; + #address-cells = <2>; + #size-cells = <2>; + interrupt-parent = <&mpic>; + + aliases { + serial0 = &serial0; + serial1 = &serial1; + ethernet0 = &enet0; + ethernet1 = &enet1; + pci0 = &pci0; + pci1 = &pci1; + pci2 = &pci2; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + PowerPC,P1022@0 { + device_type = "cpu"; + reg = <0x0>; + next-level-cache = <&L2>; + }; + + PowerPC,P1022@1 { + device_type = "cpu"; + reg = <0x1>; + next-level-cache = <&L2>; + }; + }; +}; diff --git a/arch/powerpc/boot/dts/fsl/p1023si-post.dtsi b/arch/powerpc/boot/dts/fsl/p1023si-post.dtsi new file mode 100644 index 000000000..7780f2143 --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/p1023si-post.dtsi @@ -0,0 +1,264 @@ +/* + * P1023/P1017 Silicon/SoC Device Tree Source (post include) + * + * Copyright 2011 - 2014 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +&bman_fbpr { + compatible = "fsl,bman-fbpr"; + alloc-ranges = <0 0 0x10 0>; +}; + +&lbc { + #address-cells = <2>; + #size-cells = <1>; + compatible = "fsl,p1023-elbc", "fsl,elbc", "simple-bus"; + interrupts = <19 2 0 0>, + <16 2 0 0>; +}; + +/* controller at 0xa000 */ +&pci0 { + compatible = "fsl,p1023-pcie", "fsl,qoriq-pcie-v2.2"; + device_type = "pci"; + #size-cells = <2>; + #address-cells = <3>; + bus-range = <0x0 0xff>; + clock-frequency = <33333333>; + interrupts = <16 2 0 0>; + pcie@0 { + reg = <0 0 0 0 0>; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + device_type = "pci"; + interrupts = <16 2 0 0>; + }; +}; + +/* controller at 0x9000 */ +&pci1 { + compatible = "fsl,p1023-pcie", "fsl,qoriq-pcie-v2.2"; + device_type = "pci"; + #size-cells = <2>; + #address-cells = <3>; + bus-range = <0 0xff>; + clock-frequency = <33333333>; + interrupts = <16 2 0 0>; + pcie@0 { + reg = <0 0 0 0 0>; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + device_type = "pci"; + interrupts = <16 2 0 0>; + }; +}; + +/* controller at 0xb000 */ +&pci2 { + compatible = "fsl,p1023-pcie", "fsl,qoriq-pcie-v2.2"; + device_type = "pci"; + #size-cells = <2>; + #address-cells = <3>; + bus-range = <0x0 0xff>; + clock-frequency = <33333333>; + interrupts = <16 2 0 0>; + pcie@0 { + reg = <0 0 0 0 0>; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + device_type = "pci"; + interrupts = <16 2 0 0>; + }; +}; + +&bportals { + #address-cells = <1>; + #size-cells = <1>; + compatible = "simple-bus"; + + bman-portal@0 { + compatible = "fsl,bman-portal"; + reg = <0x0 0x4000>, <0x100000 0x1000>; + interrupts = <30 2 0 0>; + }; + bman-portal@4000 { + compatible = "fsl,bman-portal"; + reg = <0x4000 0x4000>, <0x101000 0x1000>; + interrupts = <32 2 0 0>; + }; + bman-portal@8000 { + compatible = "fsl,bman-portal"; + reg = <0x8000 0x4000>, <0x102000 0x1000>; + interrupts = <34 2 0 0>; + }; +}; + +&soc { + #address-cells = <1>; + #size-cells = <1>; + device_type = "soc"; + compatible = "fsl,p1023-immr", "simple-bus"; + bus-frequency = <0>; // Filled out by uboot. + + ecm-law@0 { + compatible = "fsl,ecm-law"; + reg = <0x0 0x1000>; + fsl,num-laws = <12>; + }; + + ecm@1000 { + compatible = "fsl,p1023-ecm", "fsl,ecm"; + reg = <0x1000 0x1000>; + interrupts = <16 2 0 0>; + }; + + memory-controller@2000 { + compatible = "fsl,p1023-memory-controller"; + reg = <0x2000 0x1000>; + interrupts = <16 2 0 0>; + }; + +/include/ "pq3-i2c-0.dtsi" +/include/ "pq3-i2c-1.dtsi" +/include/ "pq3-duart-0.dtsi" + +/include/ "pq3-espi-0.dtsi" + spi@7000 { + fsl,espi-num-chipselects = <4>; + }; + +/include/ "pq3-gpio-0.dtsi" + + L2: l2-cache-controller@20000 { + compatible = "fsl,p1023-l2-cache-controller"; + reg = <0x20000 0x1000>; + cache-line-size = <32>; // 32 bytes + cache-size = <0x40000>; // L2,256K + interrupts = <16 2 0 0>; + }; + +/include/ "pq3-dma-0.dtsi" +/include/ "pq3-usb2-dr-0.dtsi" + usb@22000 { + compatible = "fsl-usb2-dr-v1.6", "fsl-usb2-dr"; + }; + + crypto: crypto@300000 { + compatible = "fsl,sec-v4.2", "fsl,sec-v4.0"; + fsl,sec-era = <3>; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x30000 0x10000>; + ranges = <0 0x30000 0x10000>; + interrupts = <58 2 0 0>; + + sec_jr0: jr@1000 { + compatible = "fsl,sec-v4.2-job-ring", + "fsl,sec-v4.0-job-ring"; + reg = <0x1000 0x1000>; + interrupts = <45 2 0 0>; + }; + + sec_jr1: jr@2000 { + compatible = "fsl,sec-v4.2-job-ring", + "fsl,sec-v4.0-job-ring"; + reg = <0x2000 0x1000>; + interrupts = <45 2 0 0>; + }; + + sec_jr2: jr@3000 { + compatible = "fsl,sec-v4.2-job-ring", + "fsl,sec-v4.0-job-ring"; + reg = <0x3000 0x1000>; + interrupts = <57 2 0 0>; + }; + + sec_jr3: jr@4000 { + compatible = "fsl,sec-v4.2-job-ring", + "fsl,sec-v4.0-job-ring"; + reg = <0x4000 0x1000>; + interrupts = <57 2 0 0>; + }; + + rtic@6000 { + compatible = "fsl,sec-v4.2-rtic", + "fsl,sec-v4.0-rtic"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x6000 0x100>; + ranges = <0x0 0x6100 0xe00>; + + rtic_a: rtic-a@0 { + compatible = "fsl,sec-v4.2-rtic-memory", + "fsl,sec-v4.0-rtic-memory"; + reg = <0x00 0x20 0x100 0x80>; + }; + + rtic_b: rtic-b@20 { + compatible = "fsl,sec-v4.2-rtic-memory", + "fsl,sec-v4.0-rtic-memory"; + reg = <0x20 0x20 0x200 0x80>; + }; + + rtic_c: rtic-c@40 { + compatible = "fsl,sec-v4.2-rtic-memory", + "fsl,sec-v4.0-rtic-memory"; + reg = <0x40 0x20 0x300 0x80>; + }; + + rtic_d: rtic-d@60 { + compatible = "fsl,sec-v4.2-rtic-memory", + "fsl,sec-v4.0-rtic-memory"; + reg = <0x60 0x20 0x500 0x80>; + }; + }; + }; + +/include/ "pq3-mpic.dtsi" +/include/ "pq3-mpic-timer-B.dtsi" + + bman: bman@8a000 { + compatible = "fsl,bman"; + reg = <0x8a000 0x1000>; + interrupts = <16 2 0 0>; + fsl,bman-portals = <&bportals>; + memory-region = <&bman_fbpr>; + }; + + global-utilities@e0000 { + compatible = "fsl,p1023-guts"; + reg = <0xe0000 0x1000>; + fsl,has-rstcr; + }; +}; diff --git a/arch/powerpc/boot/dts/fsl/p1023si-pre.dtsi b/arch/powerpc/boot/dts/fsl/p1023si-pre.dtsi new file mode 100644 index 000000000..132a15219 --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/p1023si-pre.dtsi @@ -0,0 +1,79 @@ +/* + * P1023/P1017 Silicon/SoC Device Tree Source (pre include) + * + * Copyright 2011 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +/dts-v1/; + +/include/ "e500v2_power_isa.dtsi" + +/ { + compatible = "fsl,P1023"; + #address-cells = <2>; + #size-cells = <2>; + interrupt-parent = <&mpic>; + + aliases { + serial0 = &serial0; + serial1 = &serial1; + pci0 = &pci0; + pci1 = &pci1; + pci2 = &pci2; + + crypto = &crypto; + sec_jr0 = &sec_jr0; + sec_jr1 = &sec_jr1; + sec_jr2 = &sec_jr2; + sec_jr3 = &sec_jr3; + rtic_a = &rtic_a; + rtic_b = &rtic_b; + rtic_c = &rtic_c; + rtic_d = &rtic_d; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + PowerPC,P1023@0 { + device_type = "cpu"; + reg = <0x0>; + next-level-cache = <&L2>; + }; + + PowerPC,P1023@1 { + device_type = "cpu"; + reg = <0x1>; + next-level-cache = <&L2>; + }; + }; +}; diff --git a/arch/powerpc/boot/dts/fsl/p2020si-post.dtsi b/arch/powerpc/boot/dts/fsl/p2020si-post.dtsi new file mode 100644 index 000000000..884e01bcb --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/p2020si-post.dtsi @@ -0,0 +1,201 @@ +/* + * P2020/P2010 Silicon/SoC Device Tree Source (post include) + * + * Copyright 2011 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +&lbc { + #address-cells = <2>; + #size-cells = <1>; + compatible = "fsl,p2020-elbc", "fsl,elbc", "simple-bus"; + interrupts = <19 2 0 0>; +}; + +/* controller at 0xa000 */ +&pci0 { + compatible = "fsl,mpc8548-pcie"; + device_type = "pci"; + #size-cells = <2>; + #address-cells = <3>; + bus-range = <0 255>; + clock-frequency = <33333333>; + interrupts = <26 2 0 0>; + + pcie@0 { + reg = <0 0 0 0 0>; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + device_type = "pci"; + interrupts = <26 2 0 0>; + interrupt-map-mask = <0xf800 0 0 7>; + interrupt-map = < + /* IDSEL 0x0 */ + 0000 0x0 0x0 0x1 &mpic 0x0 0x1 0x0 0x0 + 0000 0x0 0x0 0x2 &mpic 0x1 0x1 0x0 0x0 + 0000 0x0 0x0 0x3 &mpic 0x2 0x1 0x0 0x0 + 0000 0x0 0x0 0x4 &mpic 0x3 0x1 0x0 0x0 + >; + }; +}; + +/* controller at 0x9000 */ +&pci1 { + compatible = "fsl,mpc8548-pcie"; + device_type = "pci"; + #size-cells = <2>; + #address-cells = <3>; + bus-range = <0 255>; + clock-frequency = <33333333>; + interrupts = <25 2 0 0>; + + pcie@0 { + reg = <0 0 0 0 0>; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + device_type = "pci"; + interrupts = <25 2 0 0>; + interrupt-map-mask = <0xf800 0 0 7>; + + interrupt-map = < + /* IDSEL 0x0 */ + 0000 0x0 0x0 0x1 &mpic 0x4 0x1 0x0 0x0 + 0000 0x0 0x0 0x2 &mpic 0x5 0x1 0x0 0x0 + 0000 0x0 0x0 0x3 &mpic 0x6 0x1 0x0 0x0 + 0000 0x0 0x0 0x4 &mpic 0x7 0x1 0x0 0x0 + >; + }; +}; + +/* controller at 0x8000 */ +&pci2 { + compatible = "fsl,mpc8548-pcie"; + device_type = "pci"; + #size-cells = <2>; + #address-cells = <3>; + bus-range = <0 255>; + clock-frequency = <33333333>; + interrupts = <24 2 0 0>; + + pcie@0 { + reg = <0 0 0 0 0>; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + device_type = "pci"; + interrupts = <24 2 0 0>; + interrupt-map-mask = <0xf800 0 0 7>; + + interrupt-map = < + /* IDSEL 0x0 */ + 0000 0x0 0x0 0x1 &mpic 0x8 0x1 0x0 0x0 + 0000 0x0 0x0 0x2 &mpic 0x9 0x1 0x0 0x0 + 0000 0x0 0x0 0x3 &mpic 0xa 0x1 0x0 0x0 + 0000 0x0 0x0 0x4 &mpic 0xb 0x1 0x0 0x0 + >; + }; +}; + +&soc { + #address-cells = <1>; + #size-cells = <1>; + device_type = "soc"; + compatible = "fsl,p2020-immr", "simple-bus"; + bus-frequency = <0>; // Filled out by uboot. + + ecm-law@0 { + compatible = "fsl,ecm-law"; + reg = <0x0 0x1000>; + fsl,num-laws = <12>; + }; + + ecm@1000 { + compatible = "fsl,p2020-ecm", "fsl,ecm"; + reg = <0x1000 0x1000>; + interrupts = <17 2 0 0>; + }; + + memory-controller@2000 { + compatible = "fsl,p2020-memory-controller"; + reg = <0x2000 0x1000>; + interrupts = <18 2 0 0>; + }; + +/include/ "pq3-i2c-0.dtsi" +/include/ "pq3-i2c-1.dtsi" +/include/ "pq3-duart-0.dtsi" +/include/ "pq3-espi-0.dtsi" + spi0: spi@7000 { + fsl,espi-num-chipselects = <4>; + }; + +/include/ "pq3-dma-1.dtsi" +/include/ "pq3-gpio-0.dtsi" + + L2: l2-cache-controller@20000 { + compatible = "fsl,p2020-l2-cache-controller"; + reg = <0x20000 0x1000>; + cache-line-size = <32>; // 32 bytes + cache-size = <0x80000>; // L2,512K + interrupts = <16 2 0 0>; + }; + +/include/ "pq3-dma-0.dtsi" +/include/ "pq3-usb2-dr-0.dtsi" + usb@22000 { + compatible = "fsl-usb2-dr-v1.6", "fsl-usb2-dr"; + }; +/include/ "pq3-etsec1-0.dtsi" +/include/ "pq3-etsec1-timer-0.dtsi" + + ptp_clock@24e00 { + interrupts = <68 2 0 0 69 2 0 0 70 2 0 0>; + }; + + +/include/ "pq3-etsec1-1.dtsi" +/include/ "pq3-etsec1-2.dtsi" +/include/ "pq3-esdhc-0.dtsi" + sdhc@2e000 { + compatible = "fsl,p2020-esdhc", "fsl,esdhc"; + }; + +/include/ "pq3-sec3.1-0.dtsi" +/include/ "pq3-mpic.dtsi" +/include/ "pq3-mpic-timer-B.dtsi" + + global-utilities@e0000 { + compatible = "fsl,p2020-guts"; + reg = <0xe0000 0x1000>; + fsl,has-rstcr; + }; +}; diff --git a/arch/powerpc/boot/dts/fsl/p2020si-pre.dtsi b/arch/powerpc/boot/dts/fsl/p2020si-pre.dtsi new file mode 100644 index 000000000..42bf3c6d2 --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/p2020si-pre.dtsi @@ -0,0 +1,72 @@ +/* + * P2020/P2010 Silicon/SoC Device Tree Source (pre include) + * + * Copyright 2011 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +/dts-v1/; + +/include/ "e500v2_power_isa.dtsi" + +/ { + compatible = "fsl,P2020"; + #address-cells = <2>; + #size-cells = <2>; + interrupt-parent = <&mpic>; + + aliases { + serial0 = &serial0; + serial1 = &serial1; + ethernet0 = &enet0; + ethernet1 = &enet1; + ethernet2 = &enet2; + pci0 = &pci0; + pci1 = &pci1; + pci2 = &pci2; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + PowerPC,P2020@0 { + device_type = "cpu"; + reg = <0x0>; + next-level-cache = <&L2>; + }; + + PowerPC,P2020@1 { + device_type = "cpu"; + reg = <0x1>; + next-level-cache = <&L2>; + }; + }; +}; diff --git a/arch/powerpc/boot/dts/fsl/p2041si-post.dtsi b/arch/powerpc/boot/dts/fsl/p2041si-post.dtsi new file mode 100644 index 000000000..f2feacfd9 --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/p2041si-post.dtsi @@ -0,0 +1,419 @@ +/* + * P2041/P2040 Silicon/SoC Device Tree Source (post include) + * + * Copyright 2011 - 2014 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +&bman_fbpr { + compatible = "fsl,bman-fbpr"; + alloc-ranges = <0 0 0x10 0>; +}; + +&lbc { + compatible = "fsl,p2041-elbc", "fsl,elbc", "simple-bus"; + interrupts = <25 2 0 0>; + #address-cells = <2>; + #size-cells = <1>; +}; + +/* controller at 0x200000 */ +&pci0 { + compatible = "fsl,p2041-pcie", "fsl,qoriq-pcie-v2.2"; + device_type = "pci"; + #size-cells = <2>; + #address-cells = <3>; + bus-range = <0x0 0xff>; + clock-frequency = <33333333>; + interrupts = <16 2 1 15>; + fsl,iommu-parent = <&pamu0>; + fsl,liodn-reg = <&guts 0x500>; /* PEX1LIODNR */ + pcie@0 { + reg = <0 0 0 0 0>; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + device_type = "pci"; + interrupts = <16 2 1 15>; + interrupt-map-mask = <0xf800 0 0 7>; + interrupt-map = < + /* IDSEL 0x0 */ + 0000 0 0 1 &mpic 40 1 0 0 + 0000 0 0 2 &mpic 1 1 0 0 + 0000 0 0 3 &mpic 2 1 0 0 + 0000 0 0 4 &mpic 3 1 0 0 + >; + }; +}; + +/* controller at 0x201000 */ +&pci1 { + compatible = "fsl,p2041-pcie", "fsl,qoriq-pcie-v2.2"; + device_type = "pci"; + #size-cells = <2>; + #address-cells = <3>; + bus-range = <0 0xff>; + clock-frequency = <33333333>; + interrupts = <16 2 1 14>; + fsl,iommu-parent = <&pamu0>; + fsl,liodn-reg = <&guts 0x504>; /* PEX2LIODNR */ + pcie@0 { + reg = <0 0 0 0 0>; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + device_type = "pci"; + interrupts = <16 2 1 14>; + interrupt-map-mask = <0xf800 0 0 7>; + interrupt-map = < + /* IDSEL 0x0 */ + 0000 0 0 1 &mpic 41 1 0 0 + 0000 0 0 2 &mpic 5 1 0 0 + 0000 0 0 3 &mpic 6 1 0 0 + 0000 0 0 4 &mpic 7 1 0 0 + >; + }; +}; + +/* controller at 0x202000 */ +&pci2 { + compatible = "fsl,p2041-pcie", "fsl,qoriq-pcie-v2.2"; + device_type = "pci"; + #size-cells = <2>; + #address-cells = <3>; + bus-range = <0x0 0xff>; + clock-frequency = <33333333>; + interrupts = <16 2 1 13>; + fsl,iommu-parent = <&pamu0>; + fsl,liodn-reg = <&guts 0x508>; /* PEX3LIODNR */ + pcie@0 { + reg = <0 0 0 0 0>; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + device_type = "pci"; + interrupts = <16 2 1 13>; + interrupt-map-mask = <0xf800 0 0 7>; + interrupt-map = < + /* IDSEL 0x0 */ + 0000 0 0 1 &mpic 42 1 0 0 + 0000 0 0 2 &mpic 9 1 0 0 + 0000 0 0 3 &mpic 10 1 0 0 + 0000 0 0 4 &mpic 11 1 0 0 + >; + }; +}; + +&rio { + compatible = "fsl,srio"; + interrupts = <16 2 1 11>; + #address-cells = <2>; + #size-cells = <2>; + fsl,iommu-parent = <&pamu0>; + ranges; + + port1 { + #address-cells = <2>; + #size-cells = <2>; + cell-index = <1>; + fsl,liodn-reg = <&guts 0x510>; /* RIO1LIODNR */ + }; + + port2 { + #address-cells = <2>; + #size-cells = <2>; + cell-index = <2>; + fsl,liodn-reg = <&guts 0x514>; /* RIO2LIODNR */ + }; +}; + +&dcsr { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,dcsr", "simple-bus"; + + dcsr-epu@0 { + compatible = "fsl,p2041-dcsr-epu", "fsl,dcsr-epu"; + interrupts = <52 2 0 0 + 84 2 0 0 + 85 2 0 0>; + reg = <0x0 0x1000>; + }; + dcsr-npc { + compatible = "fsl,dcsr-npc"; + reg = <0x1000 0x1000 0x1000000 0x8000>; + }; + dcsr-nxc@2000 { + compatible = "fsl,dcsr-nxc"; + reg = <0x2000 0x1000>; + }; + dcsr-corenet { + compatible = "fsl,dcsr-corenet"; + reg = <0x8000 0x1000 0xB0000 0x1000>; + }; + dcsr-dpaa@9000 { + compatible = "fsl,p2041-dcsr-dpaa", "fsl,dcsr-dpaa"; + reg = <0x9000 0x1000>; + }; + dcsr-ocn@11000 { + compatible = "fsl,p2041-dcsr-ocn", "fsl,dcsr-ocn"; + reg = <0x11000 0x1000>; + }; + dcsr-ddr@12000 { + compatible = "fsl,dcsr-ddr"; + dev-handle = <&ddr1>; + reg = <0x12000 0x1000>; + }; + dcsr-nal@18000 { + compatible = "fsl,p2041-dcsr-nal", "fsl,dcsr-nal"; + reg = <0x18000 0x1000>; + }; + dcsr-rcpm@22000 { + compatible = "fsl,p2041-dcsr-rcpm", "fsl,dcsr-rcpm"; + reg = <0x22000 0x1000>; + }; + dcsr-cpu-sb-proxy@40000 { + compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy"; + cpu-handle = <&cpu0>; + reg = <0x40000 0x1000>; + }; + dcsr-cpu-sb-proxy@41000 { + compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy"; + cpu-handle = <&cpu1>; + reg = <0x41000 0x1000>; + }; + dcsr-cpu-sb-proxy@42000 { + compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy"; + cpu-handle = <&cpu2>; + reg = <0x42000 0x1000>; + }; + dcsr-cpu-sb-proxy@43000 { + compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy"; + cpu-handle = <&cpu3>; + reg = <0x43000 0x1000>; + }; +}; + +/include/ "qoriq-bman1-portals.dtsi" + +&soc { + #address-cells = <1>; + #size-cells = <1>; + device_type = "soc"; + compatible = "simple-bus"; + + soc-sram-error { + compatible = "fsl,soc-sram-error"; + interrupts = <16 2 1 29>; + }; + + corenet-law@0 { + compatible = "fsl,corenet-law"; + reg = <0x0 0x1000>; + fsl,num-laws = <32>; + }; + + ddr1: memory-controller@8000 { + compatible = "fsl,qoriq-memory-controller-v4.5", "fsl,qoriq-memory-controller"; + reg = <0x8000 0x1000>; + interrupts = <16 2 1 23>; + }; + + cpc: l3-cache-controller@10000 { + compatible = "fsl,p2041-l3-cache-controller", "fsl,p4080-l3-cache-controller", "cache"; + reg = <0x10000 0x1000>; + interrupts = <16 2 1 27>; + }; + + corenet-cf@18000 { + compatible = "fsl,corenet1-cf", "fsl,corenet-cf"; + reg = <0x18000 0x1000>; + interrupts = <16 2 1 31>; + fsl,ccf-num-csdids = <32>; + fsl,ccf-num-snoopids = <32>; + }; + + iommu@20000 { + compatible = "fsl,pamu-v1.0", "fsl,pamu"; + reg = <0x20000 0x4000>; /* for compatibility with older PAMU drivers */ + ranges = <0 0x20000 0x4000>; + #address-cells = <1>; + #size-cells = <1>; + interrupts = < + 24 2 0 0 + 16 2 1 30>; + fsl,portid-mapping = <0x0f000000>; + + pamu0: pamu@0 { + reg = <0 0x1000>; + fsl,primary-cache-geometry = <32 1>; + fsl,secondary-cache-geometry = <128 2>; + }; + + pamu1: pamu@1000 { + reg = <0x1000 0x1000>; + fsl,primary-cache-geometry = <32 1>; + fsl,secondary-cache-geometry = <128 2>; + }; + + pamu2: pamu@2000 { + reg = <0x2000 0x1000>; + fsl,primary-cache-geometry = <32 1>; + fsl,secondary-cache-geometry = <128 2>; + }; + + pamu3: pamu@3000 { + reg = <0x3000 0x1000>; + fsl,primary-cache-geometry = <32 1>; + fsl,secondary-cache-geometry = <128 2>; + }; + }; + +/include/ "qoriq-mpic.dtsi" + + guts: global-utilities@e0000 { + compatible = "fsl,qoriq-device-config-1.0"; + reg = <0xe0000 0xe00>; + fsl,has-rstcr; + #sleep-cells = <1>; + fsl,liodn-bits = <12>; + }; + + pins: global-utilities@e0e00 { + compatible = "fsl,qoriq-pin-control-1.0"; + reg = <0xe0e00 0x200>; + #sleep-cells = <2>; + }; + +/include/ "qoriq-clockgen1.dtsi" + global-utilities@e1000 { + compatible = "fsl,p2041-clockgen", "fsl,qoriq-clockgen-1.0"; + + mux2: mux2@40 { + #clock-cells = <0>; + reg = <0x40 0x4>; + compatible = "fsl,qoriq-core-mux-1.0"; + clocks = <&pll0 0>, <&pll0 1>, <&pll1 0>, <&pll1 1>; + clock-names = "pll0", "pll0-div2", "pll1", "pll1-div2"; + clock-output-names = "cmux2"; + }; + + mux3: mux3@60 { + #clock-cells = <0>; + reg = <0x60 0x4>; + compatible = "fsl,qoriq-core-mux-1.0"; + clocks = <&pll0 0>, <&pll0 1>, <&pll1 0>, <&pll1 1>; + clock-names = "pll0", "pll0-div2", "pll1", "pll1-div2"; + clock-output-names = "cmux3"; + }; + }; + + rcpm: global-utilities@e2000 { + compatible = "fsl,qoriq-rcpm-1.0"; + reg = <0xe2000 0x1000>; + #sleep-cells = <1>; + }; + + sfp: sfp@e8000 { + compatible = "fsl,p2041-sfp", "fsl,qoriq-sfp-1.0"; + reg = <0xe8000 0x1000>; + }; + + serdes: serdes@ea000 { + compatible = "fsl,p2041-serdes"; + reg = <0xea000 0x1000>; + }; + +/include/ "qoriq-dma-0.dtsi" + dma@100300 { + fsl,iommu-parent = <&pamu0>; + fsl,liodn-reg = <&guts 0x580>; /* DMA1LIODNR */ + }; + +/include/ "qoriq-dma-1.dtsi" + dma@101300 { + fsl,iommu-parent = <&pamu0>; + fsl,liodn-reg = <&guts 0x584>; /* DMA2LIODNR */ + }; + +/include/ "qoriq-espi-0.dtsi" + spi@110000 { + fsl,espi-num-chipselects = <4>; + }; + +/include/ "qoriq-esdhc-0.dtsi" + sdhc@114000 { + fsl,iommu-parent = <&pamu1>; + fsl,liodn-reg = <&guts 0x530>; /* eSDHCLIODNR */ + sdhci,auto-cmd12; + }; + +/include/ "qoriq-i2c-0.dtsi" +/include/ "qoriq-i2c-1.dtsi" +/include/ "qoriq-duart-0.dtsi" +/include/ "qoriq-duart-1.dtsi" +/include/ "qoriq-gpio-0.dtsi" +/include/ "qoriq-usb2-mph-0.dtsi" + usb0: usb@210000 { + compatible = "fsl-usb2-mph-v1.6", "fsl,mpc85xx-usb2-mph", "fsl-usb2-mph"; + phy_type = "utmi"; + fsl,iommu-parent = <&pamu1>; + fsl,liodn-reg = <&guts 0x520>; /* USB1LIODNR */ + port0; + }; + +/include/ "qoriq-usb2-dr-0.dtsi" + usb1: usb@211000 { + compatible = "fsl-usb2-dr-v1.6", "fsl,mpc85xx-usb2-dr", "fsl-usb2-dr"; + fsl,iommu-parent = <&pamu1>; + fsl,liodn-reg = <&guts 0x524>; /* USB2LIODNR */ + dr_mode = "host"; + phy_type = "utmi"; + }; + +/include/ "qoriq-sata2-0.dtsi" + sata@220000 { + fsl,iommu-parent = <&pamu1>; + fsl,liodn-reg = <&guts 0x550>; /* SATA1LIODNR */ + }; + +/include/ "qoriq-sata2-1.dtsi" + sata@221000 { + fsl,iommu-parent = <&pamu1>; + fsl,liodn-reg = <&guts 0x554>; /* SATA2LIODNR */ + }; + +/include/ "qoriq-sec4.2-0.dtsi" +crypto: crypto@300000 { + fsl,iommu-parent = <&pamu1>; + }; + +/include/ "qoriq-bman1.dtsi" +}; diff --git a/arch/powerpc/boot/dts/fsl/p2041si-pre.dtsi b/arch/powerpc/boot/dts/fsl/p2041si-pre.dtsi new file mode 100644 index 000000000..b1ea147f2 --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/p2041si-pre.dtsi @@ -0,0 +1,122 @@ +/* + * P2041 Silicon/SoC Device Tree Source (pre include) + * + * Copyright 2011 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +/dts-v1/; + +/include/ "e500mc_power_isa.dtsi" + +/ { + compatible = "fsl,P2041"; + #address-cells = <2>; + #size-cells = <2>; + interrupt-parent = <&mpic>; + + aliases { + ccsr = &soc; + dcsr = &dcsr; + + serial0 = &serial0; + serial1 = &serial1; + serial2 = &serial2; + serial3 = &serial3; + pci0 = &pci0; + pci1 = &pci1; + pci2 = &pci2; + usb0 = &usb0; + usb1 = &usb1; + dma0 = &dma0; + dma1 = &dma1; + sdhc = &sdhc; + msi0 = &msi0; + msi1 = &msi1; + msi2 = &msi2; + + crypto = &crypto; + sec_jr0 = &sec_jr0; + sec_jr1 = &sec_jr1; + sec_jr2 = &sec_jr2; + sec_jr3 = &sec_jr3; + rtic_a = &rtic_a; + rtic_b = &rtic_b; + rtic_c = &rtic_c; + rtic_d = &rtic_d; + sec_mon = &sec_mon; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu0: PowerPC,e500mc@0 { + device_type = "cpu"; + reg = <0>; + clocks = <&mux0>; + next-level-cache = <&L2_0>; + fsl,portid-mapping = <0x80000000>; + L2_0: l2-cache { + next-level-cache = <&cpc>; + }; + }; + cpu1: PowerPC,e500mc@1 { + device_type = "cpu"; + reg = <1>; + clocks = <&mux1>; + next-level-cache = <&L2_1>; + fsl,portid-mapping = <0x40000000>; + L2_1: l2-cache { + next-level-cache = <&cpc>; + }; + }; + cpu2: PowerPC,e500mc@2 { + device_type = "cpu"; + reg = <2>; + clocks = <&mux2>; + next-level-cache = <&L2_2>; + fsl,portid-mapping = <0x20000000>; + L2_2: l2-cache { + next-level-cache = <&cpc>; + }; + }; + cpu3: PowerPC,e500mc@3 { + device_type = "cpu"; + reg = <3>; + clocks = <&mux3>; + next-level-cache = <&L2_3>; + fsl,portid-mapping = <0x10000000>; + L2_3: l2-cache { + next-level-cache = <&cpc>; + }; + }; + }; +}; diff --git a/arch/powerpc/boot/dts/fsl/p3041si-post.dtsi b/arch/powerpc/boot/dts/fsl/p3041si-post.dtsi new file mode 100644 index 000000000..d6fea3739 --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/p3041si-post.dtsi @@ -0,0 +1,446 @@ +/* + * P3041 Silicon/SoC Device Tree Source (post include) + * + * Copyright 2011 - 2014 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +&bman_fbpr { + compatible = "fsl,bman-fbpr"; + alloc-ranges = <0 0 0x10 0>; +}; + +&lbc { + compatible = "fsl,p3041-elbc", "fsl,elbc", "simple-bus"; + interrupts = <25 2 0 0>; + #address-cells = <2>; + #size-cells = <1>; +}; + +/* controller at 0x200000 */ +&pci0 { + compatible = "fsl,p3041-pcie", "fsl,qoriq-pcie-v2.2"; + device_type = "pci"; + #size-cells = <2>; + #address-cells = <3>; + bus-range = <0x0 0xff>; + clock-frequency = <33333333>; + interrupts = <16 2 1 15>; + fsl,iommu-parent = <&pamu0>; + fsl,liodn-reg = <&guts 0x500>; /* PEX1LIODNR */ + pcie@0 { + reg = <0 0 0 0 0>; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + device_type = "pci"; + interrupts = <16 2 1 15>; + interrupt-map-mask = <0xf800 0 0 7>; + interrupt-map = < + /* IDSEL 0x0 */ + 0000 0 0 1 &mpic 40 1 0 0 + 0000 0 0 2 &mpic 1 1 0 0 + 0000 0 0 3 &mpic 2 1 0 0 + 0000 0 0 4 &mpic 3 1 0 0 + >; + }; +}; + +/* controller at 0x201000 */ +&pci1 { + compatible = "fsl,p3041-pcie", "fsl,qoriq-pcie-v2.2"; + device_type = "pci"; + #size-cells = <2>; + #address-cells = <3>; + bus-range = <0 0xff>; + clock-frequency = <33333333>; + interrupts = <16 2 1 14>; + fsl,iommu-parent = <&pamu0>; + fsl,liodn-reg = <&guts 0x504>; /* PEX2LIODNR */ + pcie@0 { + reg = <0 0 0 0 0>; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + device_type = "pci"; + interrupts = <16 2 1 14>; + interrupt-map-mask = <0xf800 0 0 7>; + interrupt-map = < + /* IDSEL 0x0 */ + 0000 0 0 1 &mpic 41 1 0 0 + 0000 0 0 2 &mpic 5 1 0 0 + 0000 0 0 3 &mpic 6 1 0 0 + 0000 0 0 4 &mpic 7 1 0 0 + >; + }; +}; + +/* controller at 0x202000 */ +&pci2 { + compatible = "fsl,p3041-pcie", "fsl,qoriq-pcie-v2.2"; + device_type = "pci"; + #size-cells = <2>; + #address-cells = <3>; + bus-range = <0x0 0xff>; + clock-frequency = <33333333>; + interrupts = <16 2 1 13>; + fsl,iommu-parent = <&pamu0>; + fsl,liodn-reg = <&guts 0x508>; /* PEX3LIODNR */ + pcie@0 { + reg = <0 0 0 0 0>; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + device_type = "pci"; + interrupts = <16 2 1 13>; + interrupt-map-mask = <0xf800 0 0 7>; + interrupt-map = < + /* IDSEL 0x0 */ + 0000 0 0 1 &mpic 42 1 0 0 + 0000 0 0 2 &mpic 9 1 0 0 + 0000 0 0 3 &mpic 10 1 0 0 + 0000 0 0 4 &mpic 11 1 0 0 + >; + }; +}; + +/* controller at 0x203000 */ +&pci3 { + compatible = "fsl,p3041-pcie", "fsl,qoriq-pcie-v2.2"; + device_type = "pci"; + #size-cells = <2>; + #address-cells = <3>; + bus-range = <0x0 0xff>; + clock-frequency = <33333333>; + interrupts = <16 2 1 12>; + pcie@0 { + reg = <0 0 0 0 0>; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + device_type = "pci"; + interrupts = <16 2 1 12>; + interrupt-map-mask = <0xf800 0 0 7>; + interrupt-map = < + /* IDSEL 0x0 */ + 0000 0 0 1 &mpic 43 1 0 0 + 0000 0 0 2 &mpic 0 1 0 0 + 0000 0 0 3 &mpic 4 1 0 0 + 0000 0 0 4 &mpic 8 1 0 0 + >; + }; +}; + +&rio { + compatible = "fsl,srio"; + interrupts = <16 2 1 11>; + #address-cells = <2>; + #size-cells = <2>; + fsl,iommu-parent = <&pamu0>; + ranges; + + port1 { + #address-cells = <2>; + #size-cells = <2>; + cell-index = <1>; + fsl,liodn-reg = <&guts 0x510>; /* RIO1LIODNR */ + }; + + port2 { + #address-cells = <2>; + #size-cells = <2>; + cell-index = <2>; + fsl,liodn-reg = <&guts 0x514>; /* RIO2LIODNR */ + }; +}; + +&dcsr { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,dcsr", "simple-bus"; + + dcsr-epu@0 { + compatible = "fsl,p3041-dcsr-epu", "fsl,dcsr-epu"; + interrupts = <52 2 0 0 + 84 2 0 0 + 85 2 0 0>; + reg = <0x0 0x1000>; + }; + dcsr-npc { + compatible = "fsl,dcsr-npc"; + reg = <0x1000 0x1000 0x1000000 0x8000>; + }; + dcsr-nxc@2000 { + compatible = "fsl,dcsr-nxc"; + reg = <0x2000 0x1000>; + }; + dcsr-corenet { + compatible = "fsl,dcsr-corenet"; + reg = <0x8000 0x1000 0xB0000 0x1000>; + }; + dcsr-dpaa@9000 { + compatible = "fsl,p3041-dcsr-dpaa", "fsl,dcsr-dpaa"; + reg = <0x9000 0x1000>; + }; + dcsr-ocn@11000 { + compatible = "fsl,p3041-dcsr-ocn", "fsl,dcsr-ocn"; + reg = <0x11000 0x1000>; + }; + dcsr-ddr@12000 { + compatible = "fsl,dcsr-ddr"; + dev-handle = <&ddr1>; + reg = <0x12000 0x1000>; + }; + dcsr-nal@18000 { + compatible = "fsl,p3041-dcsr-nal", "fsl,dcsr-nal"; + reg = <0x18000 0x1000>; + }; + dcsr-rcpm@22000 { + compatible = "fsl,p3041-dcsr-rcpm", "fsl,dcsr-rcpm"; + reg = <0x22000 0x1000>; + }; + dcsr-cpu-sb-proxy@40000 { + compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy"; + cpu-handle = <&cpu0>; + reg = <0x40000 0x1000>; + }; + dcsr-cpu-sb-proxy@41000 { + compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy"; + cpu-handle = <&cpu1>; + reg = <0x41000 0x1000>; + }; + dcsr-cpu-sb-proxy@42000 { + compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy"; + cpu-handle = <&cpu2>; + reg = <0x42000 0x1000>; + }; + dcsr-cpu-sb-proxy@43000 { + compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy"; + cpu-handle = <&cpu3>; + reg = <0x43000 0x1000>; + }; +}; + +/include/ "qoriq-bman1-portals.dtsi" + +&soc { + #address-cells = <1>; + #size-cells = <1>; + device_type = "soc"; + compatible = "simple-bus"; + + soc-sram-error { + compatible = "fsl,soc-sram-error"; + interrupts = <16 2 1 29>; + }; + + corenet-law@0 { + compatible = "fsl,corenet-law"; + reg = <0x0 0x1000>; + fsl,num-laws = <32>; + }; + + ddr1: memory-controller@8000 { + compatible = "fsl,qoriq-memory-controller-v4.5", "fsl,qoriq-memory-controller"; + reg = <0x8000 0x1000>; + interrupts = <16 2 1 23>; + }; + + cpc: l3-cache-controller@10000 { + compatible = "fsl,p3041-l3-cache-controller", "fsl,p4080-l3-cache-controller", "cache"; + reg = <0x10000 0x1000>; + interrupts = <16 2 1 27>; + }; + + corenet-cf@18000 { + compatible = "fsl,corenet1-cf", "fsl,corenet-cf"; + reg = <0x18000 0x1000>; + interrupts = <16 2 1 31>; + fsl,ccf-num-csdids = <32>; + fsl,ccf-num-snoopids = <32>; + }; + + iommu@20000 { + compatible = "fsl,pamu-v1.0", "fsl,pamu"; + reg = <0x20000 0x4000>; /* for compatibility with older PAMU drivers */ + ranges = <0 0x20000 0x4000>; + #address-cells = <1>; + #size-cells = <1>; + interrupts = < + 24 2 0 0 + 16 2 1 30>; + fsl,portid-mapping = <0x0f000000>; + + pamu0: pamu@0 { + reg = <0 0x1000>; + fsl,primary-cache-geometry = <32 1>; + fsl,secondary-cache-geometry = <128 2>; + }; + + pamu1: pamu@1000 { + reg = <0x1000 0x1000>; + fsl,primary-cache-geometry = <32 1>; + fsl,secondary-cache-geometry = <128 2>; + }; + + pamu2: pamu@2000 { + reg = <0x2000 0x1000>; + fsl,primary-cache-geometry = <32 1>; + fsl,secondary-cache-geometry = <128 2>; + }; + + pamu3: pamu@3000 { + reg = <0x3000 0x1000>; + fsl,primary-cache-geometry = <32 1>; + fsl,secondary-cache-geometry = <128 2>; + }; + }; + +/include/ "qoriq-mpic.dtsi" + + guts: global-utilities@e0000 { + compatible = "fsl,qoriq-device-config-1.0"; + reg = <0xe0000 0xe00>; + fsl,has-rstcr; + #sleep-cells = <1>; + fsl,liodn-bits = <12>; + }; + + pins: global-utilities@e0e00 { + compatible = "fsl,qoriq-pin-control-1.0"; + reg = <0xe0e00 0x200>; + #sleep-cells = <2>; + }; + +/include/ "qoriq-clockgen1.dtsi" + global-utilities@e1000 { + compatible = "fsl,p3041-clockgen", "fsl,qoriq-clockgen-1.0"; + + mux2: mux2@40 { + #clock-cells = <0>; + reg = <0x40 0x4>; + compatible = "fsl,qoriq-core-mux-1.0"; + clocks = <&pll0 0>, <&pll0 1>, <&pll1 0>, <&pll1 1>; + clock-names = "pll0", "pll0-div2", "pll1", "pll1-div2"; + clock-output-names = "cmux2"; + }; + + mux3: mux3@60 { + #clock-cells = <0>; + reg = <0x60 0x4>; + compatible = "fsl,qoriq-core-mux-1.0"; + clocks = <&pll0 0>, <&pll0 1>, <&pll1 0>, <&pll1 1>; + clock-names = "pll0", "pll0-div2", "pll1", "pll1-div2"; + clock-output-names = "cmux3"; + }; + }; + + rcpm: global-utilities@e2000 { + compatible = "fsl,qoriq-rcpm-1.0"; + reg = <0xe2000 0x1000>; + #sleep-cells = <1>; + }; + + sfp: sfp@e8000 { + compatible = "fsl,p3041-sfp", "fsl,qoriq-sfp-1.0"; + reg = <0xe8000 0x1000>; + }; + + serdes: serdes@ea000 { + compatible = "fsl,p3041-serdes"; + reg = <0xea000 0x1000>; + }; + +/include/ "qoriq-dma-0.dtsi" + dma@100300 { + fsl,iommu-parent = <&pamu0>; + fsl,liodn-reg = <&guts 0x580>; /* DMA1LIODNR */ + }; + +/include/ "qoriq-dma-1.dtsi" + dma@101300 { + fsl,iommu-parent = <&pamu0>; + fsl,liodn-reg = <&guts 0x584>; /* DMA2LIODNR */ + }; + +/include/ "qoriq-espi-0.dtsi" + spi@110000 { + fsl,espi-num-chipselects = <4>; + }; + +/include/ "qoriq-esdhc-0.dtsi" + sdhc@114000 { + fsl,iommu-parent = <&pamu1>; + fsl,liodn-reg = <&guts 0x530>; /* eSDHCLIODNR */ + sdhci,auto-cmd12; + }; + +/include/ "qoriq-i2c-0.dtsi" +/include/ "qoriq-i2c-1.dtsi" +/include/ "qoriq-duart-0.dtsi" +/include/ "qoriq-duart-1.dtsi" +/include/ "qoriq-gpio-0.dtsi" +/include/ "qoriq-usb2-mph-0.dtsi" + usb0: usb@210000 { + compatible = "fsl-usb2-mph-v1.6", "fsl-usb2-mph"; + phy_type = "utmi"; + fsl,iommu-parent = <&pamu1>; + fsl,liodn-reg = <&guts 0x520>; /* USB1LIODNR */ + port0; + }; + +/include/ "qoriq-usb2-dr-0.dtsi" + usb1: usb@211000 { + compatible = "fsl-usb2-dr-v1.6", "fsl,mpc85xx-usb2-dr", "fsl-usb2-dr"; + fsl,iommu-parent = <&pamu1>; + fsl,liodn-reg = <&guts 0x524>; /* USB2LIODNR */ + dr_mode = "host"; + phy_type = "utmi"; + }; + +/include/ "qoriq-sata2-0.dtsi" + sata@220000 { + fsl,iommu-parent = <&pamu1>; + fsl,liodn-reg = <&guts 0x550>; /* SATA1LIODNR */ + }; + +/include/ "qoriq-sata2-1.dtsi" + sata@221000 { + fsl,iommu-parent = <&pamu1>; + fsl,liodn-reg = <&guts 0x554>; /* SATA2LIODNR */ + }; + +/include/ "qoriq-sec4.2-0.dtsi" +crypto: crypto@300000 { + fsl,iommu-parent = <&pamu1>; + }; + +/include/ "qoriq-bman1.dtsi" +}; diff --git a/arch/powerpc/boot/dts/fsl/p3041si-pre.dtsi b/arch/powerpc/boot/dts/fsl/p3041si-pre.dtsi new file mode 100644 index 000000000..dc5f4b362 --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/p3041si-pre.dtsi @@ -0,0 +1,123 @@ +/* + * P3041 Silicon/SoC Device Tree Source (pre include) + * + * Copyright 2011 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +/dts-v1/; + +/include/ "e500mc_power_isa.dtsi" + +/ { + compatible = "fsl,P3041"; + #address-cells = <2>; + #size-cells = <2>; + interrupt-parent = <&mpic>; + + aliases { + ccsr = &soc; + dcsr = &dcsr; + + serial0 = &serial0; + serial1 = &serial1; + serial2 = &serial2; + serial3 = &serial3; + pci0 = &pci0; + pci1 = &pci1; + pci2 = &pci2; + pci3 = &pci3; + usb0 = &usb0; + usb1 = &usb1; + dma0 = &dma0; + dma1 = &dma1; + sdhc = &sdhc; + msi0 = &msi0; + msi1 = &msi1; + msi2 = &msi2; + + crypto = &crypto; + sec_jr0 = &sec_jr0; + sec_jr1 = &sec_jr1; + sec_jr2 = &sec_jr2; + sec_jr3 = &sec_jr3; + rtic_a = &rtic_a; + rtic_b = &rtic_b; + rtic_c = &rtic_c; + rtic_d = &rtic_d; + sec_mon = &sec_mon; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu0: PowerPC,e500mc@0 { + device_type = "cpu"; + reg = <0>; + clocks = <&mux0>; + next-level-cache = <&L2_0>; + fsl,portid-mapping = <0x80000000>; + L2_0: l2-cache { + next-level-cache = <&cpc>; + }; + }; + cpu1: PowerPC,e500mc@1 { + device_type = "cpu"; + reg = <1>; + clocks = <&mux1>; + next-level-cache = <&L2_1>; + fsl,portid-mapping = <0x40000000>; + L2_1: l2-cache { + next-level-cache = <&cpc>; + }; + }; + cpu2: PowerPC,e500mc@2 { + device_type = "cpu"; + reg = <2>; + clocks = <&mux2>; + next-level-cache = <&L2_2>; + fsl,portid-mapping = <0x20000000>; + L2_2: l2-cache { + next-level-cache = <&cpc>; + }; + }; + cpu3: PowerPC,e500mc@3 { + device_type = "cpu"; + reg = <3>; + clocks = <&mux3>; + next-level-cache = <&L2_3>; + fsl,portid-mapping = <0x10000000>; + L2_3: l2-cache { + next-level-cache = <&cpc>; + }; + }; + }; +}; diff --git a/arch/powerpc/boot/dts/fsl/p4080si-post.dtsi b/arch/powerpc/boot/dts/fsl/p4080si-post.dtsi new file mode 100644 index 000000000..89482c9b2 --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/p4080si-post.dtsi @@ -0,0 +1,502 @@ +/* + * P4080/P4040 Silicon/SoC Device Tree Source (post include) + * + * Copyright 2011 - 2014 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +&bman_fbpr { + compatible = "fsl,bman-fbpr"; + alloc-ranges = <0 0 0x10 0>; +}; + +&lbc { + compatible = "fsl,p4080-elbc", "fsl,elbc", "simple-bus"; + interrupts = <25 2 0 0>; + #address-cells = <2>; + #size-cells = <1>; +}; + +/* controller at 0x200000 */ +&pci0 { + compatible = "fsl,p4080-pcie", "fsl,qoriq-pcie-v2.1"; + device_type = "pci"; + #size-cells = <2>; + #address-cells = <3>; + bus-range = <0x0 0xff>; + clock-frequency = <33333333>; + interrupts = <16 2 1 15>; + fsl,iommu-parent = <&pamu0>; + fsl,liodn-reg = <&guts 0x500>; /* PEX1LIODNR */ + pcie@0 { + reg = <0 0 0 0 0>; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + device_type = "pci"; + interrupts = <16 2 1 15>; + interrupt-map-mask = <0xf800 0 0 7>; + interrupt-map = < + /* IDSEL 0x0 */ + 0000 0 0 1 &mpic 40 1 0 0 + 0000 0 0 2 &mpic 1 1 0 0 + 0000 0 0 3 &mpic 2 1 0 0 + 0000 0 0 4 &mpic 3 1 0 0 + >; + }; +}; + +/* controller at 0x201000 */ +&pci1 { + compatible = "fsl,p4080-pcie", "fsl,qoriq-pcie-v2.1"; + device_type = "pci"; + #size-cells = <2>; + #address-cells = <3>; + bus-range = <0 0xff>; + clock-frequency = <33333333>; + interrupts = <16 2 1 14>; + fsl,iommu-parent = <&pamu0>; + fsl,liodn-reg = <&guts 0x504>; /* PEX2LIODNR */ + pcie@0 { + reg = <0 0 0 0 0>; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + device_type = "pci"; + interrupts = <16 2 1 14>; + interrupt-map-mask = <0xf800 0 0 7>; + interrupt-map = < + /* IDSEL 0x0 */ + 0000 0 0 1 &mpic 41 1 0 0 + 0000 0 0 2 &mpic 5 1 0 0 + 0000 0 0 3 &mpic 6 1 0 0 + 0000 0 0 4 &mpic 7 1 0 0 + >; + }; +}; + +/* controller at 0x202000 */ +&pci2 { + compatible = "fsl,p4080-pcie", "fsl,qoriq-pcie-v2.1"; + device_type = "pci"; + #size-cells = <2>; + #address-cells = <3>; + bus-range = <0x0 0xff>; + clock-frequency = <33333333>; + interrupts = <16 2 1 13>; + fsl,iommu-parent = <&pamu0>; + fsl,liodn-reg = <&guts 0x508>; /* PEX3LIODNR */ + pcie@0 { + reg = <0 0 0 0 0>; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + device_type = "pci"; + interrupts = <16 2 1 13>; + interrupt-map-mask = <0xf800 0 0 7>; + interrupt-map = < + /* IDSEL 0x0 */ + 0000 0 0 1 &mpic 42 1 0 0 + 0000 0 0 2 &mpic 9 1 0 0 + 0000 0 0 3 &mpic 10 1 0 0 + 0000 0 0 4 &mpic 11 1 0 0 + >; + }; +}; + +&rio { + compatible = "fsl,srio"; + interrupts = <16 2 1 11>; + #address-cells = <2>; + #size-cells = <2>; + fsl,srio-rmu-handle = <&rmu>; + fsl,iommu-parent = <&pamu0>; + ranges; + + port1 { + #address-cells = <2>; + #size-cells = <2>; + cell-index = <1>; + fsl,liodn-reg = <&guts 0x510>; /* RIO1LIODNR */ + }; + + port2 { + #address-cells = <2>; + #size-cells = <2>; + cell-index = <2>; + fsl,liodn-reg = <&guts 0x514>; /* RIO2LIODNR */ + }; +}; + +&dcsr { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,dcsr", "simple-bus"; + + dcsr-epu@0 { + compatible = "fsl,p4080-dcsr-epu", "fsl,dcsr-epu"; + interrupts = <52 2 0 0 + 84 2 0 0 + 85 2 0 0>; + reg = <0x0 0x1000>; + }; + dcsr-npc { + compatible = "fsl,dcsr-npc"; + reg = <0x1000 0x1000 0x1000000 0x8000>; + }; + dcsr-nxc@2000 { + compatible = "fsl,dcsr-nxc"; + reg = <0x2000 0x1000>; + }; + dcsr-corenet { + compatible = "fsl,dcsr-corenet"; + reg = <0x8000 0x1000 0xB0000 0x1000>; + }; + dcsr-dpaa@9000 { + compatible = "fsl,p4080-dcsr-dpaa", "fsl,dcsr-dpaa"; + reg = <0x9000 0x1000>; + }; + dcsr-ocn@11000 { + compatible = "fsl,p4080-dcsr-ocn", "fsl,dcsr-ocn"; + reg = <0x11000 0x1000>; + }; + dcsr-ddr@12000 { + compatible = "fsl,dcsr-ddr"; + dev-handle = <&ddr1>; + reg = <0x12000 0x1000>; + }; + dcsr-ddr@13000 { + compatible = "fsl,dcsr-ddr"; + dev-handle = <&ddr2>; + reg = <0x13000 0x1000>; + }; + dcsr-nal@18000 { + compatible = "fsl,p4080-dcsr-nal", "fsl,dcsr-nal"; + reg = <0x18000 0x1000>; + }; + dcsr-rcpm@22000 { + compatible = "fsl,p4080-dcsr-rcpm", "fsl,dcsr-rcpm"; + reg = <0x22000 0x1000>; + }; + dcsr-cpu-sb-proxy@40000 { + compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy"; + cpu-handle = <&cpu0>; + reg = <0x40000 0x1000>; + }; + dcsr-cpu-sb-proxy@41000 { + compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy"; + cpu-handle = <&cpu1>; + reg = <0x41000 0x1000>; + }; + dcsr-cpu-sb-proxy@42000 { + compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy"; + cpu-handle = <&cpu2>; + reg = <0x42000 0x1000>; + }; + dcsr-cpu-sb-proxy@43000 { + compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy"; + cpu-handle = <&cpu3>; + reg = <0x43000 0x1000>; + }; + dcsr-cpu-sb-proxy@44000 { + compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy"; + cpu-handle = <&cpu4>; + reg = <0x44000 0x1000>; + }; + dcsr-cpu-sb-proxy@45000 { + compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy"; + cpu-handle = <&cpu5>; + reg = <0x45000 0x1000>; + }; + dcsr-cpu-sb-proxy@46000 { + compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy"; + cpu-handle = <&cpu6>; + reg = <0x46000 0x1000>; + }; + dcsr-cpu-sb-proxy@47000 { + compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy"; + cpu-handle = <&cpu7>; + reg = <0x47000 0x1000>; + }; + +}; + +/include/ "qoriq-bman1-portals.dtsi" + +&soc { + #address-cells = <1>; + #size-cells = <1>; + device_type = "soc"; + compatible = "simple-bus"; + + soc-sram-error { + compatible = "fsl,soc-sram-error"; + interrupts = <16 2 1 29>; + }; + + corenet-law@0 { + compatible = "fsl,corenet-law"; + reg = <0x0 0x1000>; + fsl,num-laws = <32>; + }; + + ddr1: memory-controller@8000 { + compatible = "fsl,qoriq-memory-controller-v4.4", "fsl,qoriq-memory-controller"; + reg = <0x8000 0x1000>; + interrupts = <16 2 1 23>; + }; + + ddr2: memory-controller@9000 { + compatible = "fsl,qoriq-memory-controller-v4.4","fsl,qoriq-memory-controller"; + reg = <0x9000 0x1000>; + interrupts = <16 2 1 22>; + }; + + cpc: l3-cache-controller@10000 { + compatible = "fsl,p4080-l3-cache-controller", "cache"; + reg = <0x10000 0x1000 + 0x11000 0x1000>; + interrupts = <16 2 1 27 + 16 2 1 26>; + }; + + corenet-cf@18000 { + compatible = "fsl,corenet1-cf", "fsl,corenet-cf"; + reg = <0x18000 0x1000>; + interrupts = <16 2 1 31>; + fsl,ccf-num-csdids = <32>; + fsl,ccf-num-snoopids = <32>; + }; + + iommu@20000 { + compatible = "fsl,pamu-v1.0", "fsl,pamu"; + reg = <0x20000 0x5000>; /* for compatibility with older PAMU drivers */ + ranges = <0 0x20000 0x5000>; + #address-cells = <1>; + #size-cells = <1>; + interrupts = < + 24 2 0 0 + 16 2 1 30>; + fsl,portid-mapping = <0x00f80000>; + + pamu0: pamu@0 { + reg = <0 0x1000>; + fsl,primary-cache-geometry = <32 1>; + fsl,secondary-cache-geometry = <128 2>; + }; + + pamu1: pamu@1000 { + reg = <0x1000 0x1000>; + fsl,primary-cache-geometry = <32 1>; + fsl,secondary-cache-geometry = <128 2>; + }; + + pamu2: pamu@2000 { + reg = <0x2000 0x1000>; + fsl,primary-cache-geometry = <32 1>; + fsl,secondary-cache-geometry = <128 2>; + }; + + pamu3: pamu@3000 { + reg = <0x3000 0x1000>; + fsl,primary-cache-geometry = <32 1>; + fsl,secondary-cache-geometry = <128 2>; + }; + + pamu4: pamu@4000 { + reg = <0x4000 0x1000>; + fsl,primary-cache-geometry = <32 1>; + fsl,secondary-cache-geometry = <128 2>; + }; + }; + +/include/ "qoriq-rmu-0.dtsi" + rmu@d3000 { + fsl,iommu-parent = <&pamu0>; + fsl,liodn-reg = <&guts 0x540>; /* RMULIODNR */ + }; + +/include/ "qoriq-mpic.dtsi" + + guts: global-utilities@e0000 { + compatible = "fsl,qoriq-device-config-1.0"; + reg = <0xe0000 0xe00>; + fsl,has-rstcr; + #sleep-cells = <1>; + fsl,liodn-bits = <12>; + }; + + pins: global-utilities@e0e00 { + compatible = "fsl,qoriq-pin-control-1.0"; + reg = <0xe0e00 0x200>; + #sleep-cells = <2>; + }; + +/include/ "qoriq-clockgen1.dtsi" + global-utilities@e1000 { + compatible = "fsl,p4080-clockgen", "fsl,qoriq-clockgen-1.0"; + + pll2: pll2@840 { + #clock-cells = <1>; + reg = <0x840 0x4>; + compatible = "fsl,qoriq-core-pll-1.0"; + clocks = <&sysclk>; + clock-output-names = "pll2", "pll2-div2"; + }; + + pll3: pll3@860 { + #clock-cells = <1>; + reg = <0x860 0x4>; + compatible = "fsl,qoriq-core-pll-1.0"; + clocks = <&sysclk>; + clock-output-names = "pll3", "pll3-div2"; + }; + + mux2: mux2@40 { + #clock-cells = <0>; + reg = <0x40 0x4>; + compatible = "fsl,qoriq-core-mux-1.0"; + clocks = <&pll0 0>, <&pll0 1>, <&pll1 0>, <&pll1 1>; + clock-names = "pll0", "pll0-div2", "pll1", "pll1-div2"; + clock-output-names = "cmux2"; + }; + + mux3: mux3@60 { + #clock-cells = <0>; + reg = <0x60 0x4>; + compatible = "fsl,qoriq-core-mux-1.0"; + clocks = <&pll0 0>, <&pll0 1>, <&pll1 0>, <&pll1 1>; + clock-names = "pll0", "pll0-div2", "pll1", "pll1-div2"; + clock-output-names = "cmux3"; + }; + + mux4: mux4@80 { + #clock-cells = <0>; + reg = <0x80 0x4>; + compatible = "fsl,qoriq-core-mux-1.0"; + clocks = <&pll2 0>, <&pll2 1>, <&pll3 0>, <&pll3 1>; + clock-names = "pll2", "pll2-div2", "pll3", "pll3-div2"; + clock-output-names = "cmux4"; + }; + + mux5: mux5@a0 { + #clock-cells = <0>; + reg = <0xa0 0x4>; + compatible = "fsl,qoriq-core-mux-1.0"; + clocks = <&pll2 0>, <&pll2 1>, <&pll3 0>, <&pll3 1>; + clock-names = "pll2", "pll2-div2", "pll3", "pll3-div2"; + clock-output-names = "cmux5"; + }; + + mux6: mux6@c0 { + #clock-cells = <0>; + reg = <0xc0 0x4>; + compatible = "fsl,qoriq-core-mux-1.0"; + clocks = <&pll2 0>, <&pll2 1>, <&pll3 0>, <&pll3 1>; + clock-names = "pll2", "pll2-div2", "pll3", "pll3-div2"; + clock-output-names = "cmux6"; + }; + + mux7: mux7@e0 { + #clock-cells = <0>; + reg = <0xe0 0x4>; + compatible = "fsl,qoriq-core-mux-1.0"; + clocks = <&pll2 0>, <&pll2 1>, <&pll3 0>, <&pll3 1>; + clock-names = "pll2", "pll2-div2", "pll3", "pll3-div2"; + clock-output-names = "cmux7"; + }; + }; + + rcpm: global-utilities@e2000 { + compatible = "fsl,qoriq-rcpm-1.0"; + reg = <0xe2000 0x1000>; + #sleep-cells = <1>; + }; + + sfp: sfp@e8000 { + compatible = "fsl,p4080-sfp", "fsl,qoriq-sfp-1.0"; + reg = <0xe8000 0x1000>; + }; + + serdes: serdes@ea000 { + compatible = "fsl,p4080-serdes"; + reg = <0xea000 0x1000>; + }; + +/include/ "qoriq-dma-0.dtsi" + dma@100300 { + fsl,iommu-parent = <&pamu0>; + fsl,liodn-reg = <&guts 0x580>; /* DMA1LIODNR */ + }; + +/include/ "qoriq-dma-1.dtsi" + dma@101300 { + fsl,iommu-parent = <&pamu0>; + fsl,liodn-reg = <&guts 0x584>; /* DMA2LIODNR */ + }; + +/include/ "qoriq-espi-0.dtsi" + spi@110000 { + fsl,espi-num-chipselects = <4>; + }; + +/include/ "qoriq-esdhc-0.dtsi" + sdhc@114000 { + fsl,iommu-parent = <&pamu1>; + fsl,liodn-reg = <&guts 0x530>; /* eSDHCLIODNR */ + voltage-ranges = <3300 3300>; + sdhci,auto-cmd12; + }; + +/include/ "qoriq-i2c-0.dtsi" +/include/ "qoriq-i2c-1.dtsi" +/include/ "qoriq-duart-0.dtsi" +/include/ "qoriq-duart-1.dtsi" +/include/ "qoriq-gpio-0.dtsi" +/include/ "qoriq-usb2-mph-0.dtsi" + usb@210000 { + compatible = "fsl-usb2-mph-v1.6", "fsl,mpc85xx-usb2-mph", "fsl-usb2-mph"; + fsl,iommu-parent = <&pamu1>; + fsl,liodn-reg = <&guts 0x520>; /* USB1LIODNR */ + port0; + }; +/include/ "qoriq-usb2-dr-0.dtsi" + usb@211000 { + compatible = "fsl-usb2-dr-v1.6", "fsl,mpc85xx-usb2-dr", "fsl-usb2-dr"; + fsl,iommu-parent = <&pamu1>; + fsl,liodn-reg = <&guts 0x524>; /* USB2LIODNR */ + }; +/include/ "qoriq-sec4.0-0.dtsi" +crypto: crypto@300000 { + fsl,iommu-parent = <&pamu1>; + }; + +/include/ "qoriq-bman1.dtsi" +}; diff --git a/arch/powerpc/boot/dts/fsl/p4080si-pre.dtsi b/arch/powerpc/boot/dts/fsl/p4080si-pre.dtsi new file mode 100644 index 000000000..38bde0958 --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/p4080si-pre.dtsi @@ -0,0 +1,162 @@ +/* + * P4080/P4040 Silicon/SoC Device Tree Source (pre include) + * + * Copyright 2011 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +/dts-v1/; + +/include/ "e500mc_power_isa.dtsi" + +/ { + compatible = "fsl,P4080"; + #address-cells = <2>; + #size-cells = <2>; + interrupt-parent = <&mpic>; + + aliases { + ccsr = &soc; + dcsr = &dcsr; + + serial0 = &serial0; + serial1 = &serial1; + serial2 = &serial2; + serial3 = &serial3; + pci0 = &pci0; + pci1 = &pci1; + pci2 = &pci2; + usb0 = &usb0; + usb1 = &usb1; + dma0 = &dma0; + dma1 = &dma1; + sdhc = &sdhc; + msi0 = &msi0; + msi1 = &msi1; + msi2 = &msi2; + + crypto = &crypto; + sec_jr0 = &sec_jr0; + sec_jr1 = &sec_jr1; + sec_jr2 = &sec_jr2; + sec_jr3 = &sec_jr3; + rtic_a = &rtic_a; + rtic_b = &rtic_b; + rtic_c = &rtic_c; + rtic_d = &rtic_d; + sec_mon = &sec_mon; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu0: PowerPC,e500mc@0 { + device_type = "cpu"; + reg = <0>; + clocks = <&mux0>; + next-level-cache = <&L2_0>; + fsl,portid-mapping = <0x80000000>; + L2_0: l2-cache { + next-level-cache = <&cpc>; + }; + }; + cpu1: PowerPC,e500mc@1 { + device_type = "cpu"; + reg = <1>; + clocks = <&mux1>; + next-level-cache = <&L2_1>; + fsl,portid-mapping = <0x40000000>; + L2_1: l2-cache { + next-level-cache = <&cpc>; + }; + }; + cpu2: PowerPC,e500mc@2 { + device_type = "cpu"; + reg = <2>; + clocks = <&mux2>; + next-level-cache = <&L2_2>; + fsl,portid-mapping = <0x20000000>; + L2_2: l2-cache { + next-level-cache = <&cpc>; + }; + }; + cpu3: PowerPC,e500mc@3 { + device_type = "cpu"; + reg = <3>; + clocks = <&mux3>; + next-level-cache = <&L2_3>; + fsl,portid-mapping = <0x10000000>; + L2_3: l2-cache { + next-level-cache = <&cpc>; + }; + }; + cpu4: PowerPC,e500mc@4 { + device_type = "cpu"; + reg = <4>; + clocks = <&mux4>; + next-level-cache = <&L2_4>; + fsl,portid-mapping = <0x08000000>; + L2_4: l2-cache { + next-level-cache = <&cpc>; + }; + }; + cpu5: PowerPC,e500mc@5 { + device_type = "cpu"; + reg = <5>; + clocks = <&mux5>; + next-level-cache = <&L2_5>; + fsl,portid-mapping = <0x04000000>; + L2_5: l2-cache { + next-level-cache = <&cpc>; + }; + }; + cpu6: PowerPC,e500mc@6 { + device_type = "cpu"; + reg = <6>; + clocks = <&mux6>; + next-level-cache = <&L2_6>; + fsl,portid-mapping = <0x02000000>; + L2_6: l2-cache { + next-level-cache = <&cpc>; + }; + }; + cpu7: PowerPC,e500mc@7 { + device_type = "cpu"; + reg = <7>; + clocks = <&mux7>; + next-level-cache = <&L2_7>; + fsl,portid-mapping = <0x01000000>; + L2_7: l2-cache { + next-level-cache = <&cpc>; + }; + }; + }; +}; diff --git a/arch/powerpc/boot/dts/fsl/p5020si-post.dtsi b/arch/powerpc/boot/dts/fsl/p5020si-post.dtsi new file mode 100644 index 000000000..6e04851e2 --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/p5020si-post.dtsi @@ -0,0 +1,437 @@ +/* + * P5020/5010 Silicon/SoC Device Tree Source (post include) + * + * Copyright 2011 - 2014 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +&bman_fbpr { + compatible = "fsl,bman-fbpr"; + alloc-ranges = <0 0 0x10000 0>; +}; + +&lbc { + compatible = "fsl,p5020-elbc", "fsl,elbc", "simple-bus"; + interrupts = <25 2 0 0>; + #address-cells = <2>; + #size-cells = <1>; +}; + +/* controller at 0x200000 */ +&pci0 { + compatible = "fsl,p5020-pcie", "fsl,qoriq-pcie-v2.2"; + device_type = "pci"; + #size-cells = <2>; + #address-cells = <3>; + bus-range = <0x0 0xff>; + clock-frequency = <33333333>; + interrupts = <16 2 1 15>; + fsl,iommu-parent = <&pamu0>; + fsl,liodn-reg = <&guts 0x500>; /* PEX1LIODNR */ + pcie@0 { + reg = <0 0 0 0 0>; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + device_type = "pci"; + interrupts = <16 2 1 15>; + interrupt-map-mask = <0xf800 0 0 7>; + interrupt-map = < + /* IDSEL 0x0 */ + 0000 0 0 1 &mpic 40 1 0 0 + 0000 0 0 2 &mpic 1 1 0 0 + 0000 0 0 3 &mpic 2 1 0 0 + 0000 0 0 4 &mpic 3 1 0 0 + >; + }; +}; + +/* controller at 0x201000 */ +&pci1 { + compatible = "fsl,p5020-pcie", "fsl,qoriq-pcie-v2.2"; + device_type = "pci"; + #size-cells = <2>; + #address-cells = <3>; + bus-range = <0 0xff>; + clock-frequency = <33333333>; + interrupts = <16 2 1 14>; + fsl,iommu-parent = <&pamu0>; + fsl,liodn-reg = <&guts 0x504>; /* PEX2LIODNR */ + pcie@0 { + reg = <0 0 0 0 0>; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + device_type = "pci"; + interrupts = <16 2 1 14>; + interrupt-map-mask = <0xf800 0 0 7>; + interrupt-map = < + /* IDSEL 0x0 */ + 0000 0 0 1 &mpic 41 1 0 0 + 0000 0 0 2 &mpic 5 1 0 0 + 0000 0 0 3 &mpic 6 1 0 0 + 0000 0 0 4 &mpic 7 1 0 0 + >; + }; +}; + +/* controller at 0x202000 */ +&pci2 { + compatible = "fsl,p5020-pcie", "fsl,qoriq-pcie-v2.2"; + device_type = "pci"; + #size-cells = <2>; + #address-cells = <3>; + bus-range = <0x0 0xff>; + clock-frequency = <33333333>; + interrupts = <16 2 1 13>; + fsl,iommu-parent = <&pamu0>; + fsl,liodn-reg = <&guts 0x508>; /* PEX3LIODNR */ + pcie@0 { + reg = <0 0 0 0 0>; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + device_type = "pci"; + interrupts = <16 2 1 13>; + interrupt-map-mask = <0xf800 0 0 7>; + interrupt-map = < + /* IDSEL 0x0 */ + 0000 0 0 1 &mpic 42 1 0 0 + 0000 0 0 2 &mpic 9 1 0 0 + 0000 0 0 3 &mpic 10 1 0 0 + 0000 0 0 4 &mpic 11 1 0 0 + >; + }; +}; + +/* controller at 0x203000 */ +&pci3 { + compatible = "fsl,p5020-pcie", "fsl,qoriq-pcie-v2.2"; + device_type = "pci"; + #size-cells = <2>; + #address-cells = <3>; + bus-range = <0x0 0xff>; + clock-frequency = <33333333>; + interrupts = <16 2 1 12>; + fsl,iommu-parent = <&pamu0>; + fsl,liodn-reg = <&guts 0x50c>; /* PEX4LIODNR */ + pcie@0 { + reg = <0 0 0 0 0>; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + device_type = "pci"; + interrupts = <16 2 1 12>; + interrupt-map-mask = <0xf800 0 0 7>; + interrupt-map = < + /* IDSEL 0x0 */ + 0000 0 0 1 &mpic 43 1 0 0 + 0000 0 0 2 &mpic 0 1 0 0 + 0000 0 0 3 &mpic 4 1 0 0 + 0000 0 0 4 &mpic 8 1 0 0 + >; + }; +}; + +&rio { + compatible = "fsl,srio"; + interrupts = <16 2 1 11>; + #address-cells = <2>; + #size-cells = <2>; + fsl,iommu-parent = <&pamu0>; + ranges; + + port1 { + #address-cells = <2>; + #size-cells = <2>; + cell-index = <1>; + fsl,liodn-reg = <&guts 0x510>; /* RIO1LIODNR */ + }; + + port2 { + #address-cells = <2>; + #size-cells = <2>; + cell-index = <2>; + fsl,liodn-reg = <&guts 0x514>; /* RIO2LIODNR */ + }; +}; + +&dcsr { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,dcsr", "simple-bus"; + + dcsr-epu@0 { + compatible = "fsl,p5020-dcsr-epu", "fsl,dcsr-epu"; + interrupts = <52 2 0 0 + 84 2 0 0 + 85 2 0 0>; + reg = <0x0 0x1000>; + }; + dcsr-npc { + compatible = "fsl,dcsr-npc"; + reg = <0x1000 0x1000 0x1000000 0x8000>; + }; + dcsr-nxc@2000 { + compatible = "fsl,dcsr-nxc"; + reg = <0x2000 0x1000>; + }; + dcsr-corenet { + compatible = "fsl,dcsr-corenet"; + reg = <0x8000 0x1000 0xB0000 0x1000>; + }; + dcsr-dpaa@9000 { + compatible = "fsl,p5020-dcsr-dpaa", "fsl,dcsr-dpaa"; + reg = <0x9000 0x1000>; + }; + dcsr-ocn@11000 { + compatible = "fsl,p5020-dcsr-ocn", "fsl,dcsr-ocn"; + reg = <0x11000 0x1000>; + }; + dcsr-ddr@12000 { + compatible = "fsl,dcsr-ddr"; + dev-handle = <&ddr1>; + reg = <0x12000 0x1000>; + }; + dcsr-ddr@13000 { + compatible = "fsl,dcsr-ddr"; + dev-handle = <&ddr2>; + reg = <0x13000 0x1000>; + }; + dcsr-nal@18000 { + compatible = "fsl,p5020-dcsr-nal", "fsl,dcsr-nal"; + reg = <0x18000 0x1000>; + }; + dcsr-rcpm@22000 { + compatible = "fsl,p5020-dcsr-rcpm", "fsl,dcsr-rcpm"; + reg = <0x22000 0x1000>; + }; + dcsr-cpu-sb-proxy@40000 { + compatible = "fsl,dcsr-e5500-sb-proxy", "fsl,dcsr-cpu-sb-proxy"; + cpu-handle = <&cpu0>; + reg = <0x40000 0x1000>; + }; + dcsr-cpu-sb-proxy@41000 { + compatible = "fsl,dcsr-e5500-sb-proxy", "fsl,dcsr-cpu-sb-proxy"; + cpu-handle = <&cpu1>; + reg = <0x41000 0x1000>; + }; +}; + +/include/ "qoriq-bman1-portals.dtsi" + +&soc { + #address-cells = <1>; + #size-cells = <1>; + device_type = "soc"; + compatible = "simple-bus"; + + soc-sram-error { + compatible = "fsl,soc-sram-error"; + interrupts = <16 2 1 29>; + }; + + corenet-law@0 { + compatible = "fsl,corenet-law"; + reg = <0x0 0x1000>; + fsl,num-laws = <32>; + }; + + ddr1: memory-controller@8000 { + compatible = "fsl,qoriq-memory-controller-v4.5", "fsl,qoriq-memory-controller"; + reg = <0x8000 0x1000>; + interrupts = <16 2 1 23>; + }; + + ddr2: memory-controller@9000 { + compatible = "fsl,qoriq-memory-controller-v4.5","fsl,qoriq-memory-controller"; + reg = <0x9000 0x1000>; + interrupts = <16 2 1 22>; + }; + + cpc: l3-cache-controller@10000 { + compatible = "fsl,p5020-l3-cache-controller", "fsl,p4080-l3-cache-controller", "cache"; + reg = <0x10000 0x1000 + 0x11000 0x1000>; + interrupts = <16 2 1 27 + 16 2 1 26>; + }; + + corenet-cf@18000 { + compatible = "fsl,corenet1-cf", "fsl,corenet-cf"; + reg = <0x18000 0x1000>; + interrupts = <16 2 1 31>; + fsl,ccf-num-csdids = <32>; + fsl,ccf-num-snoopids = <32>; + }; + + iommu@20000 { + compatible = "fsl,pamu-v1.0", "fsl,pamu"; + reg = <0x20000 0x4000>; /* for compatibility with older PAMU drivers */ + ranges = <0 0x20000 0x4000>; + #address-cells = <1>; + #size-cells = <1>; + interrupts = < + 24 2 0 0 + 16 2 1 30>; + fsl,portid-mapping = <0x3c000000>; + + pamu0: pamu@0 { + reg = <0 0x1000>; + fsl,primary-cache-geometry = <32 1>; + fsl,secondary-cache-geometry = <128 2>; + }; + + pamu1: pamu@1000 { + reg = <0x1000 0x1000>; + fsl,primary-cache-geometry = <32 1>; + fsl,secondary-cache-geometry = <128 2>; + }; + + pamu2: pamu@2000 { + reg = <0x2000 0x1000>; + fsl,primary-cache-geometry = <32 1>; + fsl,secondary-cache-geometry = <128 2>; + }; + + pamu3: pamu@3000 { + reg = <0x3000 0x1000>; + fsl,primary-cache-geometry = <32 1>; + fsl,secondary-cache-geometry = <128 2>; + }; + }; + +/include/ "qoriq-mpic.dtsi" + + guts: global-utilities@e0000 { + compatible = "fsl,qoriq-device-config-1.0"; + reg = <0xe0000 0xe00>; + fsl,has-rstcr; + #sleep-cells = <1>; + fsl,liodn-bits = <12>; + }; + + pins: global-utilities@e0e00 { + compatible = "fsl,qoriq-pin-control-1.0"; + reg = <0xe0e00 0x200>; + #sleep-cells = <2>; + }; + +/include/ "qoriq-clockgen1.dtsi" + global-utilities@e1000 { + compatible = "fsl,p5020-clockgen", "fsl,qoriq-clockgen-1.0"; + }; + + rcpm: global-utilities@e2000 { + compatible = "fsl,qoriq-rcpm-1.0"; + reg = <0xe2000 0x1000>; + #sleep-cells = <1>; + }; + + sfp: sfp@e8000 { + compatible = "fsl,p5020-sfp", "fsl,qoriq-sfp-1.0"; + reg = <0xe8000 0x1000>; + }; + + serdes: serdes@ea000 { + compatible = "fsl,p5020-serdes"; + reg = <0xea000 0x1000>; + }; + +/include/ "qoriq-dma-0.dtsi" + dma@100300 { + fsl,iommu-parent = <&pamu0>; + fsl,liodn-reg = <&guts 0x580>; /* DMA1LIODNR */ + }; + +/include/ "qoriq-dma-1.dtsi" + dma@101300 { + fsl,iommu-parent = <&pamu0>; + fsl,liodn-reg = <&guts 0x584>; /* DMA2LIODNR */ + }; + +/include/ "qoriq-espi-0.dtsi" + spi@110000 { + fsl,espi-num-chipselects = <4>; + }; + +/include/ "qoriq-esdhc-0.dtsi" + sdhc@114000 { + fsl,iommu-parent = <&pamu1>; + fsl,liodn-reg = <&guts 0x530>; /* eSDHCLIODNR */ + sdhci,auto-cmd12; + }; + +/include/ "qoriq-i2c-0.dtsi" +/include/ "qoriq-i2c-1.dtsi" +/include/ "qoriq-duart-0.dtsi" +/include/ "qoriq-duart-1.dtsi" +/include/ "qoriq-gpio-0.dtsi" +/include/ "qoriq-usb2-mph-0.dtsi" + usb0: usb@210000 { + compatible = "fsl-usb2-mph-v1.6", "fsl,mpc85xx-usb2-mph", "fsl-usb2-mph"; + fsl,iommu-parent = <&pamu1>; + fsl,liodn-reg = <&guts 0x520>; /* USB1LIODNR */ + phy_type = "utmi"; + port0; + }; + +/include/ "qoriq-usb2-dr-0.dtsi" + usb1: usb@211000 { + compatible = "fsl-usb2-dr-v1.6", "fsl,mpc85xx-usb2-dr", "fsl-usb2-dr"; + fsl,iommu-parent = <&pamu1>; + fsl,liodn-reg = <&guts 0x524>; /* USB2LIODNR */ + dr_mode = "host"; + phy_type = "utmi"; + }; + +/include/ "qoriq-sata2-0.dtsi" + sata@220000 { + fsl,iommu-parent = <&pamu1>; + fsl,liodn-reg = <&guts 0x550>; /* SATA1LIODNR */ + }; + +/include/ "qoriq-sata2-1.dtsi" + sata@221000 { + fsl,iommu-parent = <&pamu1>; + fsl,liodn-reg = <&guts 0x554>; /* SATA2LIODNR */ + }; +/include/ "qoriq-sec4.2-0.dtsi" + crypto@300000 { + fsl,iommu-parent = <&pamu1>; + }; + +/include/ "qoriq-bman1.dtsi" + +/include/ "qoriq-raid1.0-0.dtsi" + raideng@320000 { + fsl,iommu-parent = <&pamu1>; + }; +}; diff --git a/arch/powerpc/boot/dts/fsl/p5020si-pre.dtsi b/arch/powerpc/boot/dts/fsl/p5020si-pre.dtsi new file mode 100644 index 000000000..1cc61e126 --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/p5020si-pre.dtsi @@ -0,0 +1,109 @@ +/* + * P5020/P5010 Silicon/SoC Device Tree Source (pre include) + * + * Copyright 2011 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +/dts-v1/; + +/include/ "e5500_power_isa.dtsi" + +/ { + compatible = "fsl,P5020"; + #address-cells = <2>; + #size-cells = <2>; + interrupt-parent = <&mpic>; + + aliases { + ccsr = &soc; + dcsr = &dcsr; + + serial0 = &serial0; + serial1 = &serial1; + serial2 = &serial2; + serial3 = &serial3; + pci0 = &pci0; + pci1 = &pci1; + pci2 = &pci2; + pci3 = &pci3; + usb0 = &usb0; + usb1 = &usb1; + dma0 = &dma0; + dma1 = &dma1; + sdhc = &sdhc; + msi0 = &msi0; + msi1 = &msi1; + msi2 = &msi2; + + crypto = &crypto; + sec_jr0 = &sec_jr0; + sec_jr1 = &sec_jr1; + sec_jr2 = &sec_jr2; + sec_jr3 = &sec_jr3; + rtic_a = &rtic_a; + rtic_b = &rtic_b; + rtic_c = &rtic_c; + rtic_d = &rtic_d; + sec_mon = &sec_mon; + + raideng = &raideng; + raideng_jr0 = &raideng_jr0; + raideng_jr1 = &raideng_jr1; + raideng_jr2 = &raideng_jr2; + raideng_jr3 = &raideng_jr3; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu0: PowerPC,e5500@0 { + device_type = "cpu"; + reg = <0>; + clocks = <&mux0>; + next-level-cache = <&L2_0>; + fsl,portid-mapping = <0x80000000>; + L2_0: l2-cache { + next-level-cache = <&cpc>; + }; + }; + cpu1: PowerPC,e5500@1 { + device_type = "cpu"; + reg = <1>; + clocks = <&mux1>; + next-level-cache = <&L2_1>; + fsl,portid-mapping = <0x40000000>; + L2_1: l2-cache { + next-level-cache = <&cpc>; + }; + }; + }; +}; diff --git a/arch/powerpc/boot/dts/fsl/p5040si-post.dtsi b/arch/powerpc/boot/dts/fsl/p5040si-post.dtsi new file mode 100644 index 000000000..5e44dfa1e --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/p5040si-post.dtsi @@ -0,0 +1,411 @@ +/* + * P5040 Silicon/SoC Device Tree Source (post include) + * + * Copyright 2012 - 2014 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * This software is provided by Freescale Semiconductor "as is" and any + * express or implied warranties, including, but not limited to, the implied + * warranties of merchantability and fitness for a particular purpose are + * disclaimed. In no event shall Freescale Semiconductor be liable for any + * direct, indirect, incidental, special, exemplary, or consequential damages + * (including, but not limited to, procurement of substitute goods or services; + * loss of use, data, or profits; or business interruption) however caused and + * on any theory of liability, whether in contract, strict liability, or tort + * (including negligence or otherwise) arising in any way out of the use of this + * software, even if advised of the possibility of such damage. + */ + +&bman_fbpr { + compatible = "fsl,bman-fbpr"; + alloc-ranges = <0 0 0x10000 0>; +}; + +&lbc { + compatible = "fsl,p5040-elbc", "fsl,elbc", "simple-bus"; + interrupts = <25 2 0 0>; + #address-cells = <2>; + #size-cells = <1>; +}; + +/* controller at 0x200000 */ +&pci0 { + compatible = "fsl,p5040-pcie", "fsl,qoriq-pcie-v2.4"; + device_type = "pci"; + #size-cells = <2>; + #address-cells = <3>; + bus-range = <0x0 0xff>; + clock-frequency = <33333333>; + interrupts = <16 2 1 15>; + fsl,iommu-parent = <&pamu0>; + pcie@0 { + reg = <0 0 0 0 0>; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + device_type = "pci"; + interrupts = <16 2 1 15>; + interrupt-map-mask = <0xf800 0 0 7>; + interrupt-map = < + /* IDSEL 0x0 */ + 0000 0 0 1 &mpic 40 1 0 0 + 0000 0 0 2 &mpic 1 1 0 0 + 0000 0 0 3 &mpic 2 1 0 0 + 0000 0 0 4 &mpic 3 1 0 0 + >; + }; +}; + +/* controller at 0x201000 */ +&pci1 { + compatible = "fsl,p5040-pcie", "fsl,qoriq-pcie-v2.4"; + device_type = "pci"; + #size-cells = <2>; + #address-cells = <3>; + bus-range = <0 0xff>; + clock-frequency = <33333333>; + interrupts = <16 2 1 14>; + fsl,iommu-parent = <&pamu0>; + pcie@0 { + reg = <0 0 0 0 0>; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + device_type = "pci"; + interrupts = <16 2 1 14>; + interrupt-map-mask = <0xf800 0 0 7>; + interrupt-map = < + /* IDSEL 0x0 */ + 0000 0 0 1 &mpic 41 1 0 0 + 0000 0 0 2 &mpic 5 1 0 0 + 0000 0 0 3 &mpic 6 1 0 0 + 0000 0 0 4 &mpic 7 1 0 0 + >; + }; +}; + +/* controller at 0x202000 */ +&pci2 { + compatible = "fsl,p5040-pcie", "fsl,qoriq-pcie-v2.4"; + device_type = "pci"; + #size-cells = <2>; + #address-cells = <3>; + bus-range = <0x0 0xff>; + clock-frequency = <33333333>; + interrupts = <16 2 1 13>; + fsl,iommu-parent = <&pamu0>; + pcie@0 { + reg = <0 0 0 0 0>; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + device_type = "pci"; + interrupts = <16 2 1 13>; + interrupt-map-mask = <0xf800 0 0 7>; + interrupt-map = < + /* IDSEL 0x0 */ + 0000 0 0 1 &mpic 42 1 0 0 + 0000 0 0 2 &mpic 9 1 0 0 + 0000 0 0 3 &mpic 10 1 0 0 + 0000 0 0 4 &mpic 11 1 0 0 + >; + }; +}; + +&dcsr { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,dcsr", "simple-bus"; + + dcsr-epu@0 { + compatible = "fsl,p5040-dcsr-epu", "fsl,dcsr-epu"; + interrupts = <52 2 0 0 + 84 2 0 0 + 85 2 0 0>; + reg = <0x0 0x1000>; + }; + dcsr-npc { + compatible = "fsl,dcsr-npc"; + reg = <0x1000 0x1000 0x1000000 0x8000>; + }; + dcsr-nxc@2000 { + compatible = "fsl,dcsr-nxc"; + reg = <0x2000 0x1000>; + }; + dcsr-corenet { + compatible = "fsl,dcsr-corenet"; + reg = <0x8000 0x1000 0xB0000 0x1000>; + }; + dcsr-dpaa@9000 { + compatible = "fsl,p5040-dcsr-dpaa", "fsl,dcsr-dpaa"; + reg = <0x9000 0x1000>; + }; + dcsr-ocn@11000 { + compatible = "fsl,p5040-dcsr-ocn", "fsl,dcsr-ocn"; + reg = <0x11000 0x1000>; + }; + dcsr-ddr@12000 { + compatible = "fsl,dcsr-ddr"; + dev-handle = <&ddr1>; + reg = <0x12000 0x1000>; + }; + dcsr-ddr@13000 { + compatible = "fsl,dcsr-ddr"; + dev-handle = <&ddr2>; + reg = <0x13000 0x1000>; + }; + dcsr-nal@18000 { + compatible = "fsl,p5040-dcsr-nal", "fsl,dcsr-nal"; + reg = <0x18000 0x1000>; + }; + dcsr-rcpm@22000 { + compatible = "fsl,p5040-dcsr-rcpm", "fsl,dcsr-rcpm"; + reg = <0x22000 0x1000>; + }; + dcsr-cpu-sb-proxy@40000 { + compatible = "fsl,dcsr-e5500-sb-proxy", "fsl,dcsr-cpu-sb-proxy"; + cpu-handle = <&cpu0>; + reg = <0x40000 0x1000>; + }; + dcsr-cpu-sb-proxy@41000 { + compatible = "fsl,dcsr-e5500-sb-proxy", "fsl,dcsr-cpu-sb-proxy"; + cpu-handle = <&cpu1>; + reg = <0x41000 0x1000>; + }; + dcsr-cpu-sb-proxy@42000 { + compatible = "fsl,dcsr-e5500-sb-proxy", "fsl,dcsr-cpu-sb-proxy"; + cpu-handle = <&cpu2>; + reg = <0x42000 0x1000>; + }; + dcsr-cpu-sb-proxy@43000 { + compatible = "fsl,dcsr-e5500-sb-proxy", "fsl,dcsr-cpu-sb-proxy"; + cpu-handle = <&cpu3>; + reg = <0x43000 0x1000>; + }; +}; + +/include/ "qoriq-bman1-portals.dtsi" + +&soc { + #address-cells = <1>; + #size-cells = <1>; + device_type = "soc"; + compatible = "simple-bus"; + + soc-sram-error { + compatible = "fsl,soc-sram-error"; + interrupts = <16 2 1 29>; + }; + + corenet-law@0 { + compatible = "fsl,corenet-law"; + reg = <0x0 0x1000>; + fsl,num-laws = <32>; + }; + + ddr1: memory-controller@8000 { + compatible = "fsl,qoriq-memory-controller-v4.5", "fsl,qoriq-memory-controller"; + reg = <0x8000 0x1000>; + interrupts = <16 2 1 23>; + }; + + ddr2: memory-controller@9000 { + compatible = "fsl,qoriq-memory-controller-v4.5","fsl,qoriq-memory-controller"; + reg = <0x9000 0x1000>; + interrupts = <16 2 1 22>; + }; + + cpc: l3-cache-controller@10000 { + compatible = "fsl,p5040-l3-cache-controller", "fsl,p4080-l3-cache-controller", "cache"; + reg = <0x10000 0x1000 + 0x11000 0x1000>; + interrupts = <16 2 1 27 + 16 2 1 26>; + }; + + corenet-cf@18000 { + compatible = "fsl,corenet1-cf", "fsl,corenet-cf"; + reg = <0x18000 0x1000>; + interrupts = <16 2 1 31>; + fsl,ccf-num-csdids = <32>; + fsl,ccf-num-snoopids = <32>; + }; + + iommu@20000 { + compatible = "fsl,pamu-v1.0", "fsl,pamu"; + reg = <0x20000 0x5000>; /* for compatibility with older PAMU drivers */ + ranges = <0 0x20000 0x5000>; + #address-cells = <1>; + #size-cells = <1>; + interrupts = <24 2 0 0 + 16 2 1 30>; + fsl,portid-mapping = <0x0f800000>; + + pamu0: pamu@0 { + reg = <0 0x1000>; + fsl,primary-cache-geometry = <32 1>; + fsl,secondary-cache-geometry = <128 2>; + }; + + pamu1: pamu@1000 { + reg = <0x1000 0x1000>; + fsl,primary-cache-geometry = <32 1>; + fsl,secondary-cache-geometry = <128 2>; + }; + + pamu2: pamu@2000 { + reg = <0x2000 0x1000>; + fsl,primary-cache-geometry = <32 1>; + fsl,secondary-cache-geometry = <128 2>; + }; + + pamu3: pamu@3000 { + reg = <0x3000 0x1000>; + fsl,primary-cache-geometry = <32 1>; + fsl,secondary-cache-geometry = <128 2>; + }; + + pamu4: pamu@4000 { + reg = <0x4000 0x1000>; + fsl,primary-cache-geometry = <32 1>; + fsl,secondary-cache-geometry = <128 2>; + }; + }; + +/include/ "qoriq-mpic.dtsi" + + guts: global-utilities@e0000 { + compatible = "fsl,p5040-device-config", "fsl,qoriq-device-config-1.0"; + reg = <0xe0000 0xe00>; + fsl,has-rstcr; + #sleep-cells = <1>; + fsl,liodn-bits = <12>; + }; + + pins: global-utilities@e0e00 { + compatible = "fsl,p5040-pin-control", "fsl,qoriq-pin-control-1.0"; + reg = <0xe0e00 0x200>; + #sleep-cells = <2>; + }; + +/include/ "qoriq-clockgen1.dtsi" + global-utilities@e1000 { + compatible = "fsl,p5040-clockgen", "fsl,qoriq-clockgen-1.0"; + + mux2: mux2@40 { + #clock-cells = <0>; + reg = <0x40 0x4>; + compatible = "fsl,qoriq-core-mux-1.0"; + clocks = <&pll0 0>, <&pll0 1>, <&pll1 0>, <&pll1 1>; + clock-names = "pll0", "pll0-div2", "pll1", "pll1-div2"; + clock-output-names = "cmux2"; + }; + + mux3: mux3@60 { + #clock-cells = <0>; + reg = <0x60 0x4>; + compatible = "fsl,qoriq-core-mux-1.0"; + clocks = <&pll0 0>, <&pll0 1>, <&pll1 0>, <&pll1 1>; + clock-names = "pll0", "pll0-div2", "pll1", "pll1-div2"; + clock-output-names = "cmux3"; + }; + }; + + rcpm: global-utilities@e2000 { + compatible = "fsl,p5040-rcpm", "fsl,qoriq-rcpm-1.0"; + reg = <0xe2000 0x1000>; + #sleep-cells = <1>; + }; + + sfp: sfp@e8000 { + compatible = "fsl,p5040-sfp", "fsl,qoriq-sfp-1.0"; + reg = <0xe8000 0x1000>; + }; + + serdes: serdes@ea000 { + compatible = "fsl,p5040-serdes"; + reg = <0xea000 0x1000>; + }; + +/include/ "qoriq-dma-0.dtsi" + dma@100300 { + fsl,iommu-parent = <&pamu0>; + fsl,liodn-reg = <&guts 0x580>; /* DMA1LIODNR */ + }; + +/include/ "qoriq-dma-1.dtsi" + dma@101300 { + fsl,iommu-parent = <&pamu0>; + fsl,liodn-reg = <&guts 0x584>; /* DMA2LIODNR */ + }; + +/include/ "qoriq-espi-0.dtsi" + spi@110000 { + fsl,espi-num-chipselects = <4>; + }; + +/include/ "qoriq-esdhc-0.dtsi" + sdhc@114000 { + fsl,iommu-parent = <&pamu2>; + fsl,liodn-reg = <&guts 0x530>; /* eSDHCLIODNR */ + sdhci,auto-cmd12; + }; + +/include/ "qoriq-i2c-0.dtsi" +/include/ "qoriq-i2c-1.dtsi" +/include/ "qoriq-duart-0.dtsi" +/include/ "qoriq-duart-1.dtsi" +/include/ "qoriq-gpio-0.dtsi" +/include/ "qoriq-usb2-mph-0.dtsi" + usb0: usb@210000 { + compatible = "fsl-usb2-mph-v1.6", "fsl,mpc85xx-usb2-mph", "fsl-usb2-mph"; + fsl,iommu-parent = <&pamu4>; + fsl,liodn-reg = <&guts 0x520>; /* USB1LIODNR */ + phy_type = "utmi"; + port0; + }; + +/include/ "qoriq-usb2-dr-0.dtsi" + usb1: usb@211000 { + compatible = "fsl-usb2-dr-v1.6", "fsl,mpc85xx-usb2-dr", "fsl-usb2-dr"; + fsl,iommu-parent = <&pamu4>; + fsl,liodn-reg = <&guts 0x524>; /* USB2LIODNR */ + dr_mode = "host"; + phy_type = "utmi"; + }; + +/include/ "qoriq-sata2-0.dtsi" + sata@220000 { + fsl,iommu-parent = <&pamu4>; + fsl,liodn-reg = <&guts 0x550>; /* SATA1LIODNR */ + }; + +/include/ "qoriq-sata2-1.dtsi" + sata@221000 { + fsl,iommu-parent = <&pamu4>; + fsl,liodn-reg = <&guts 0x554>; /* SATA2LIODNR */ + }; + +/include/ "qoriq-sec5.2-0.dtsi" + crypto@300000 { + fsl,iommu-parent = <&pamu4>; + }; + +/include/ "qoriq-bman1.dtsi" +}; diff --git a/arch/powerpc/boot/dts/fsl/p5040si-pre.dtsi b/arch/powerpc/boot/dts/fsl/p5040si-pre.dtsi new file mode 100644 index 000000000..b048a2be0 --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/p5040si-pre.dtsi @@ -0,0 +1,122 @@ +/* + * P5040 Silicon/SoC Device Tree Source (pre include) + * + * Copyright 2012 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * This software is provided by Freescale Semiconductor "as is" and any + * express or implied warranties, including, but not limited to, the implied + * warranties of merchantability and fitness for a particular purpose are + * disclaimed. In no event shall Freescale Semiconductor be liable for any + * direct, indirect, incidental, special, exemplary, or consequential damages + * (including, but not limited to, procurement of substitute goods or services; + * loss of use, data, or profits; or business interruption) however caused and + * on any theory of liability, whether in contract, strict liability, or tort + * (including negligence or otherwise) arising in any way out of the use of this + * software, even if advised of the possibility of such damage. + */ + +/dts-v1/; + +/include/ "e5500_power_isa.dtsi" + +/ { + compatible = "fsl,P5040"; + #address-cells = <2>; + #size-cells = <2>; + interrupt-parent = <&mpic>; + + aliases { + ccsr = &soc; + dcsr = &dcsr; + + serial0 = &serial0; + serial1 = &serial1; + serial2 = &serial2; + serial3 = &serial3; + pci0 = &pci0; + pci1 = &pci1; + pci2 = &pci2; + usb0 = &usb0; + usb1 = &usb1; + dma0 = &dma0; + dma1 = &dma1; + sdhc = &sdhc; + msi0 = &msi0; + msi1 = &msi1; + msi2 = &msi2; + + crypto = &crypto; + sec_jr0 = &sec_jr0; + sec_jr1 = &sec_jr1; + sec_jr2 = &sec_jr2; + sec_jr3 = &sec_jr3; + rtic_a = &rtic_a; + rtic_b = &rtic_b; + rtic_c = &rtic_c; + rtic_d = &rtic_d; + sec_mon = &sec_mon; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu0: PowerPC,e5500@0 { + device_type = "cpu"; + reg = <0>; + clocks = <&mux0>; + next-level-cache = <&L2_0>; + fsl,portid-mapping = <0x80000000>; + L2_0: l2-cache { + next-level-cache = <&cpc>; + }; + }; + cpu1: PowerPC,e5500@1 { + device_type = "cpu"; + reg = <1>; + clocks = <&mux1>; + next-level-cache = <&L2_1>; + fsl,portid-mapping = <0x40000000>; + L2_1: l2-cache { + next-level-cache = <&cpc>; + }; + }; + cpu2: PowerPC,e5500@2 { + device_type = "cpu"; + reg = <2>; + clocks = <&mux2>; + next-level-cache = <&L2_2>; + fsl,portid-mapping = <0x20000000>; + L2_2: l2-cache { + next-level-cache = <&cpc>; + }; + }; + cpu3: PowerPC,e5500@3 { + device_type = "cpu"; + reg = <3>; + clocks = <&mux3>; + next-level-cache = <&L2_3>; + fsl,portid-mapping = <0x10000000>; + L2_3: l2-cache { + next-level-cache = <&cpc>; + }; + }; + }; +}; diff --git a/arch/powerpc/boot/dts/fsl/pq3-dma-0.dtsi b/arch/powerpc/boot/dts/fsl/pq3-dma-0.dtsi new file mode 100644 index 000000000..b5b37ad30 --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/pq3-dma-0.dtsi @@ -0,0 +1,66 @@ +/* + * PQ3 DMA device tree stub [ controller @ offset 0x21000 ] + * + * Copyright 2011 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +dma@21300 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,eloplus-dma"; + reg = <0x21300 0x4>; + ranges = <0x0 0x21100 0x200>; + cell-index = <0>; + dma-channel@0 { + compatible = "fsl,eloplus-dma-channel"; + reg = <0x0 0x80>; + cell-index = <0>; + interrupts = <20 2 0 0>; + }; + dma-channel@80 { + compatible = "fsl,eloplus-dma-channel"; + reg = <0x80 0x80>; + cell-index = <1>; + interrupts = <21 2 0 0>; + }; + dma-channel@100 { + compatible = "fsl,eloplus-dma-channel"; + reg = <0x100 0x80>; + cell-index = <2>; + interrupts = <22 2 0 0>; + }; + dma-channel@180 { + compatible = "fsl,eloplus-dma-channel"; + reg = <0x180 0x80>; + cell-index = <3>; + interrupts = <23 2 0 0>; + }; +}; diff --git a/arch/powerpc/boot/dts/fsl/pq3-dma-1.dtsi b/arch/powerpc/boot/dts/fsl/pq3-dma-1.dtsi new file mode 100644 index 000000000..28cb8a55d --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/pq3-dma-1.dtsi @@ -0,0 +1,66 @@ +/* + * PQ3 DMA device tree stub [ controller @ offset 0xc300 ] + * + * Copyright 2011 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +dma@c300 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,eloplus-dma"; + reg = <0xc300 0x4>; + ranges = <0x0 0xc100 0x200>; + cell-index = <1>; + dma-channel@0 { + compatible = "fsl,eloplus-dma-channel"; + reg = <0x0 0x80>; + cell-index = <0>; + interrupts = <76 2 0 0>; + }; + dma-channel@80 { + compatible = "fsl,eloplus-dma-channel"; + reg = <0x80 0x80>; + cell-index = <1>; + interrupts = <77 2 0 0>; + }; + dma-channel@100 { + compatible = "fsl,eloplus-dma-channel"; + reg = <0x100 0x80>; + cell-index = <2>; + interrupts = <78 2 0 0>; + }; + dma-channel@180 { + compatible = "fsl,eloplus-dma-channel"; + reg = <0x180 0x80>; + cell-index = <3>; + interrupts = <79 2 0 0>; + }; +}; diff --git a/arch/powerpc/boot/dts/fsl/pq3-duart-0.dtsi b/arch/powerpc/boot/dts/fsl/pq3-duart-0.dtsi new file mode 100644 index 000000000..5e268fdb9 --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/pq3-duart-0.dtsi @@ -0,0 +1,51 @@ +/* + * PQ3 DUART device tree stub [ controller @ offset 0x4000 ] + * + * Copyright 2011 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +serial0: serial@4500 { + cell-index = <0>; + device_type = "serial"; + compatible = "fsl,ns16550", "ns16550"; + reg = <0x4500 0x100>; + clock-frequency = <0>; + interrupts = <42 2 0 0>; +}; + +serial1: serial@4600 { + cell-index = <1>; + device_type = "serial"; + compatible = "fsl,ns16550", "ns16550"; + reg = <0x4600 0x100>; + clock-frequency = <0>; + interrupts = <42 2 0 0>; +}; diff --git a/arch/powerpc/boot/dts/fsl/pq3-esdhc-0.dtsi b/arch/powerpc/boot/dts/fsl/pq3-esdhc-0.dtsi new file mode 100644 index 000000000..5743433e2 --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/pq3-esdhc-0.dtsi @@ -0,0 +1,41 @@ +/* + * PQ3 eSDHC device tree stub [ controller @ offset 0x2e000 ] + * + * Copyright 2011 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +sdhc@2e000 { + compatible = "fsl,esdhc"; + reg = <0x2e000 0x1000>; + interrupts = <72 0x2 0 0>; + /* Filled in by U-Boot */ + clock-frequency = <0>; +}; diff --git a/arch/powerpc/boot/dts/fsl/pq3-espi-0.dtsi b/arch/powerpc/boot/dts/fsl/pq3-espi-0.dtsi new file mode 100644 index 000000000..75854b2e0 --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/pq3-espi-0.dtsi @@ -0,0 +1,41 @@ +/* + * PQ3 eSPI device tree stub [ controller @ offset 0x7000 ] + * + * Copyright 2011 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +spi@7000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,mpc8536-espi"; + reg = <0x7000 0x1000>; + interrupts = <59 0x2 0 0>; +}; diff --git a/arch/powerpc/boot/dts/fsl/pq3-etsec1-0.dtsi b/arch/powerpc/boot/dts/fsl/pq3-etsec1-0.dtsi new file mode 100644 index 000000000..3b0650a98 --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/pq3-etsec1-0.dtsi @@ -0,0 +1,54 @@ +/* + * PQ3 eTSEC device tree stub [ @ offsets 0x24000 ] + * + * Copyright 2011-2012 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +ethernet@24000 { + #address-cells = <1>; + #size-cells = <1>; + cell-index = <0>; + device_type = "network"; + model = "eTSEC"; + compatible = "gianfar"; + reg = <0x24000 0x1000>; + ranges = <0x0 0x24000 0x1000>; + fsl,magic-packet; + local-mac-address = [ 00 00 00 00 00 00 ]; + interrupts = <29 2 0 0 30 2 0 0 34 2 0 0>; +}; + +mdio@24520 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,gianfar-mdio"; + reg = <0x24520 0x20>; +}; diff --git a/arch/powerpc/boot/dts/fsl/pq3-etsec1-1.dtsi b/arch/powerpc/boot/dts/fsl/pq3-etsec1-1.dtsi new file mode 100644 index 000000000..96693b41f --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/pq3-etsec1-1.dtsi @@ -0,0 +1,54 @@ +/* + * PQ3 eTSEC device tree stub [ @ offsets 0x25000 ] + * + * Copyright 2011-2012 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +ethernet@25000 { + #address-cells = <1>; + #size-cells = <1>; + cell-index = <1>; + device_type = "network"; + model = "eTSEC"; + compatible = "gianfar"; + reg = <0x25000 0x1000>; + ranges = <0x0 0x25000 0x1000>; + fsl,magic-packet; + local-mac-address = [ 00 00 00 00 00 00 ]; + interrupts = <35 2 0 0 36 2 0 0 40 2 0 0>; +}; + +mdio@25520 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,gianfar-tbi"; + reg = <0x25520 0x20>; +}; diff --git a/arch/powerpc/boot/dts/fsl/pq3-etsec1-2.dtsi b/arch/powerpc/boot/dts/fsl/pq3-etsec1-2.dtsi new file mode 100644 index 000000000..6b3fab19d --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/pq3-etsec1-2.dtsi @@ -0,0 +1,54 @@ +/* + * PQ3 eTSEC device tree stub [ @ offsets 0x26000 ] + * + * Copyright 2011-2012 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +ethernet@26000 { + #address-cells = <1>; + #size-cells = <1>; + cell-index = <2>; + device_type = "network"; + model = "eTSEC"; + compatible = "gianfar"; + reg = <0x26000 0x1000>; + ranges = <0x0 0x26000 0x1000>; + fsl,magic-packet; + local-mac-address = [ 00 00 00 00 00 00 ]; + interrupts = <31 2 0 0 32 2 0 0 33 2 0 0>; +}; + +mdio@26520 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,gianfar-tbi"; + reg = <0x26520 0x20>; +}; diff --git a/arch/powerpc/boot/dts/fsl/pq3-etsec1-3.dtsi b/arch/powerpc/boot/dts/fsl/pq3-etsec1-3.dtsi new file mode 100644 index 000000000..0da592d93 --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/pq3-etsec1-3.dtsi @@ -0,0 +1,54 @@ +/* + * PQ3 eTSEC device tree stub [ @ offsets 0x27000 ] + * + * Copyright 2011-2012 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +ethernet@27000 { + #address-cells = <1>; + #size-cells = <1>; + cell-index = <3>; + device_type = "network"; + model = "eTSEC"; + compatible = "gianfar"; + reg = <0x27000 0x1000>; + ranges = <0x0 0x27000 0x1000>; + fsl,magic-packet; + local-mac-address = [ 00 00 00 00 00 00 ]; + interrupts = <37 2 0 0 38 2 0 0 39 2 0 0>; +}; + +mdio@27520 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,gianfar-tbi"; + reg = <0x27520 0x20>; +}; diff --git a/arch/powerpc/boot/dts/fsl/pq3-etsec1-timer-0.dtsi b/arch/powerpc/boot/dts/fsl/pq3-etsec1-timer-0.dtsi new file mode 100644 index 000000000..efe2ca04b --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/pq3-etsec1-timer-0.dtsi @@ -0,0 +1,39 @@ +/* + * PQ3 eTSEC Timer (IEEE 1588) device tree stub [ @ offsets 0x24e00 ] + * + * Copyright 2011 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +ptp_clock@24e00 { + compatible = "fsl,etsec-ptp"; + reg = <0x24e00 0xb0>; + interrupts = <68 2 0 0 69 2 0 0>; +}; diff --git a/arch/powerpc/boot/dts/fsl/pq3-etsec2-0.dtsi b/arch/powerpc/boot/dts/fsl/pq3-etsec2-0.dtsi new file mode 100644 index 000000000..7fcb1ac0f --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/pq3-etsec2-0.dtsi @@ -0,0 +1,61 @@ +/* + * PQ3 eTSEC2 device tree stub [ @ offsets 0x24000/0xb0000 ] + * + * Copyright 2011 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + + +mdio@24000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,etsec2-mdio"; + reg = <0x24000 0x1000 0xb0030 0x4>; +}; + +ethernet@b0000 { + #address-cells = <1>; + #size-cells = <1>; + device_type = "network"; + model = "eTSEC"; + compatible = "fsl,etsec2"; + fsl,num_rx_queues = <0x8>; + fsl,num_tx_queues = <0x8>; + fsl,magic-packet; + local-mac-address = [ 00 00 00 00 00 00 ]; + ranges; + + queue-group@b0000 { + #address-cells = <1>; + #size-cells = <1>; + reg = <0xb0000 0x1000>; + interrupts = <29 2 0 0 30 2 0 0 34 2 0 0>; + }; +}; diff --git a/arch/powerpc/boot/dts/fsl/pq3-etsec2-1.dtsi b/arch/powerpc/boot/dts/fsl/pq3-etsec2-1.dtsi new file mode 100644 index 000000000..9f25427c1 --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/pq3-etsec2-1.dtsi @@ -0,0 +1,61 @@ +/* + * PQ3 eTSEC2 device tree stub [ @ offsets 0x25000/0xb1000 ] + * + * Copyright 2011 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + + +mdio@25000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,etsec2-tbi"; + reg = <0x25000 0x1000 0xb1030 0x4>; +}; + +ethernet@b1000 { + #address-cells = <1>; + #size-cells = <1>; + device_type = "network"; + model = "eTSEC"; + compatible = "fsl,etsec2"; + fsl,num_rx_queues = <0x8>; + fsl,num_tx_queues = <0x8>; + fsl,magic-packet; + local-mac-address = [ 00 00 00 00 00 00 ]; + ranges; + + queue-group@b1000 { + #address-cells = <1>; + #size-cells = <1>; + reg = <0xb1000 0x1000>; + interrupts = <35 2 0 0 36 2 0 0 40 2 0 0>; + }; +}; diff --git a/arch/powerpc/boot/dts/fsl/pq3-etsec2-2.dtsi b/arch/powerpc/boot/dts/fsl/pq3-etsec2-2.dtsi new file mode 100644 index 000000000..cd7c318ab --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/pq3-etsec2-2.dtsi @@ -0,0 +1,60 @@ +/* + * PQ3 eTSEC2 device tree stub [ @ offsets 0x26000/0xb2000 ] + * + * Copyright 2011 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +mdio@26000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,etsec2-tbi"; + reg = <0x26000 0x1000 0xb1030 0x4>; +}; + +ethernet@b2000 { + #address-cells = <1>; + #size-cells = <1>; + device_type = "network"; + model = "eTSEC"; + compatible = "fsl,etsec2"; + fsl,num_rx_queues = <0x8>; + fsl,num_tx_queues = <0x8>; + fsl,magic-packet; + local-mac-address = [ 00 00 00 00 00 00 ]; + ranges; + + queue-group@b2000 { + #address-cells = <1>; + #size-cells = <1>; + reg = <0xb2000 0x1000>; + interrupts = <31 2 0 0 32 2 0 0 33 2 0 0>; + }; +}; diff --git a/arch/powerpc/boot/dts/fsl/pq3-etsec2-grp2-0.dtsi b/arch/powerpc/boot/dts/fsl/pq3-etsec2-grp2-0.dtsi new file mode 100644 index 000000000..034ab8fac --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/pq3-etsec2-grp2-0.dtsi @@ -0,0 +1,42 @@ +/* + * PQ3 eTSEC2 Group 2 device tree stub [ @ offsets 0xb4000 ] + * + * Copyright 2011 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +&enet0_grp2 { + queue-group@b4000 { + #address-cells = <1>; + #size-cells = <1>; + reg = <0xb4000 0x1000>; + interrupts = <17 2 0 0 18 2 0 0 24 2 0 0>; + }; +}; diff --git a/arch/powerpc/boot/dts/fsl/pq3-etsec2-grp2-1.dtsi b/arch/powerpc/boot/dts/fsl/pq3-etsec2-grp2-1.dtsi new file mode 100644 index 000000000..3be9ba3b3 --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/pq3-etsec2-grp2-1.dtsi @@ -0,0 +1,42 @@ +/* + * PQ3 eTSEC2 Group 2 device tree stub [ @ offsets 0xb5000 ] + * + * Copyright 2011 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +&enet1_grp2 { + queue-group@b5000 { + #address-cells = <1>; + #size-cells = <1>; + reg = <0xb5000 0x1000>; + interrupts = <51 2 0 0 52 2 0 0 67 2 0 0>; + }; +}; diff --git a/arch/powerpc/boot/dts/fsl/pq3-etsec2-grp2-2.dtsi b/arch/powerpc/boot/dts/fsl/pq3-etsec2-grp2-2.dtsi new file mode 100644 index 000000000..02a334570 --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/pq3-etsec2-grp2-2.dtsi @@ -0,0 +1,42 @@ +/* + * PQ3 eTSEC2 Group 2 device tree stub [ @ offsets 0xb6000 ] + * + * Copyright 2011 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +&enet2_grp2 { + queue-group@b6000 { + #address-cells = <1>; + #size-cells = <1>; + reg = <0xb6000 0x1000>; + interrupts = <25 2 0 0 26 2 0 0 27 2 0 0>; + }; +}; diff --git a/arch/powerpc/boot/dts/fsl/pq3-gpio-0.dtsi b/arch/powerpc/boot/dts/fsl/pq3-gpio-0.dtsi new file mode 100644 index 000000000..a1b48546b --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/pq3-gpio-0.dtsi @@ -0,0 +1,41 @@ +/* + * PQ3 GPIO device tree stub [ controller @ offset 0xfc00 ] + * + * Copyright 2011 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +gpio-controller@fc00 { + #gpio-cells = <2>; + compatible = "fsl,pq3-gpio"; + reg = <0xfc00 0x100>; + interrupts = <47 0x2 0 0>; + gpio-controller; +}; diff --git a/arch/powerpc/boot/dts/fsl/pq3-i2c-0.dtsi b/arch/powerpc/boot/dts/fsl/pq3-i2c-0.dtsi new file mode 100644 index 000000000..d1dd6fb82 --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/pq3-i2c-0.dtsi @@ -0,0 +1,43 @@ +/* + * PQ3 I2C device tree stub [ controller @ offset 0x3000 ] + * + * Copyright 2011 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +i2c@3000 { + #address-cells = <1>; + #size-cells = <0>; + cell-index = <0>; + compatible = "fsl-i2c"; + reg = <0x3000 0x100>; + interrupts = <43 2 0 0>; + dfsrr; +}; diff --git a/arch/powerpc/boot/dts/fsl/pq3-i2c-1.dtsi b/arch/powerpc/boot/dts/fsl/pq3-i2c-1.dtsi new file mode 100644 index 000000000..a9bd803e2 --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/pq3-i2c-1.dtsi @@ -0,0 +1,43 @@ +/* + * PQ3 I2C device tree stub [ controller @ offset 0x3100 ] + * + * Copyright 2011 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +i2c@3100 { + #address-cells = <1>; + #size-cells = <0>; + cell-index = <1>; + compatible = "fsl-i2c"; + reg = <0x3100 0x100>; + interrupts = <43 2 0 0>; + dfsrr; +}; diff --git a/arch/powerpc/boot/dts/fsl/pq3-mpic-message-B.dtsi b/arch/powerpc/boot/dts/fsl/pq3-mpic-message-B.dtsi new file mode 100644 index 000000000..1cf0b77b1 --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/pq3-mpic-message-B.dtsi @@ -0,0 +1,43 @@ +/* + * PQ3 MPIC Message (Group B) device tree stub [ controller @ offset 0x42400 ] + * + * Copyright 2012 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +message@42400 { + compatible = "fsl,mpic-v3.1-msgr"; + reg = <0x42400 0x200>; + interrupts = < + 0xb4 2 0 0 + 0xb5 2 0 0 + 0xb6 2 0 0 + 0xb7 2 0 0>; +}; diff --git a/arch/powerpc/boot/dts/fsl/pq3-mpic-timer-B.dtsi b/arch/powerpc/boot/dts/fsl/pq3-mpic-timer-B.dtsi new file mode 100644 index 000000000..8734cffae --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/pq3-mpic-timer-B.dtsi @@ -0,0 +1,42 @@ +/* + * PQ3 MPIC Timer (Group B) device tree stub [ controller @ offset 0x42100 ] + * + * Copyright 2011 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +timer@42100 { + compatible = "fsl,mpic-global-timer"; + reg = <0x42100 0x100 0x42300 4>; + interrupts = <4 0 3 0 + 5 0 3 0 + 6 0 3 0 + 7 0 3 0>; +}; diff --git a/arch/powerpc/boot/dts/fsl/pq3-mpic.dtsi b/arch/powerpc/boot/dts/fsl/pq3-mpic.dtsi new file mode 100644 index 000000000..71c30eb10 --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/pq3-mpic.dtsi @@ -0,0 +1,79 @@ +/* + * PQ3 MPIC device tree stub [ controller @ offset 0x40000 ] + * + * Copyright 2011 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +mpic: pic@40000 { + interrupt-controller; + #address-cells = <0>; + #interrupt-cells = <4>; + reg = <0x40000 0x40000>; + compatible = "fsl,mpic"; + device_type = "open-pic"; + big-endian; + single-cpu-affinity; + last-interrupt-source = <255>; +}; + +timer@41100 { + compatible = "fsl,mpic-global-timer"; + reg = <0x41100 0x100 0x41300 4>; + interrupts = <0 0 3 0 + 1 0 3 0 + 2 0 3 0 + 3 0 3 0>; +}; + +message@41400 { + compatible = "fsl,mpic-v3.1-msgr"; + reg = <0x41400 0x200>; + interrupts = < + 0xb0 2 0 0 + 0xb1 2 0 0 + 0xb2 2 0 0 + 0xb3 2 0 0>; +}; + +msi@41600 { + compatible = "fsl,mpic-msi"; + reg = <0x41600 0x80>; + msi-available-ranges = <0 0x100>; + interrupts = < + 0xe0 0 0 0 + 0xe1 0 0 0 + 0xe2 0 0 0 + 0xe3 0 0 0 + 0xe4 0 0 0 + 0xe5 0 0 0 + 0xe6 0 0 0 + 0xe7 0 0 0>; +}; diff --git a/arch/powerpc/boot/dts/fsl/pq3-rmu-0.dtsi b/arch/powerpc/boot/dts/fsl/pq3-rmu-0.dtsi new file mode 100644 index 000000000..587ca9ffa --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/pq3-rmu-0.dtsi @@ -0,0 +1,68 @@ +/* + * PQ3 RIO Message Unit device tree stub [ controller @ offset 0xd3000 ] + * + * Copyright 2011 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +rmu: rmu@d3000 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,srio-rmu"; + reg = <0xd3000 0x500>; + ranges = <0x0 0xd3000 0x500>; + + message-unit@0 { + compatible = "fsl,srio-msg-unit"; + reg = <0x0 0x100>; + interrupts = < + 53 2 0 0 /* msg1_tx_irq */ + 54 2 0 0>;/* msg1_rx_irq */ + }; + message-unit@100 { + compatible = "fsl,srio-msg-unit"; + reg = <0x100 0x100>; + interrupts = < + 55 2 0 0 /* msg2_tx_irq */ + 56 2 0 0>;/* msg2_rx_irq */ + }; + doorbell-unit@400 { + compatible = "fsl,srio-dbell-unit"; + reg = <0x400 0x80>; + interrupts = < + 49 2 0 0 /* bell_outb_irq */ + 50 2 0 0>;/* bell_inb_irq */ + }; + port-write-unit@4e0 { + compatible = "fsl,srio-port-write-unit"; + reg = <0x4e0 0x20>; + interrupts = <48 2 0 0>; + }; +}; diff --git a/arch/powerpc/boot/dts/fsl/pq3-sata2-0.dtsi b/arch/powerpc/boot/dts/fsl/pq3-sata2-0.dtsi new file mode 100644 index 000000000..3c28dd08d --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/pq3-sata2-0.dtsi @@ -0,0 +1,40 @@ +/* + * PQ3 SATAv2 device tree stub [ controller @ offset 0x18000 ] + * + * Copyright 2011 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +sata@18000 { + compatible = "fsl,pq-sata-v2"; + reg = <0x18000 0x1000>; + cell-index = <1>; + interrupts = <74 0x2 0 0>; +}; diff --git a/arch/powerpc/boot/dts/fsl/pq3-sata2-1.dtsi b/arch/powerpc/boot/dts/fsl/pq3-sata2-1.dtsi new file mode 100644 index 000000000..eefaf2855 --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/pq3-sata2-1.dtsi @@ -0,0 +1,40 @@ +/* + * PQ3 SATAv2 device tree stub [ controller @ offset 0x19000 ] + * + * Copyright 2011 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +sata@19000 { + compatible = "fsl,pq-sata-v2"; + reg = <0x19000 0x1000>; + cell-index = <2>; + interrupts = <41 0x2 0 0>; +}; diff --git a/arch/powerpc/boot/dts/fsl/pq3-sec2.1-0.dtsi b/arch/powerpc/boot/dts/fsl/pq3-sec2.1-0.dtsi new file mode 100644 index 000000000..02a5c7ae7 --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/pq3-sec2.1-0.dtsi @@ -0,0 +1,43 @@ +/* + * PQ3 Sec/Crypto 2.1 device tree stub [ controller @ offset 0x30000 ] + * + * Copyright 2011 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +crypto@30000 { + compatible = "fsl,sec2.1", "fsl,sec2.0"; + reg = <0x30000 0x10000>; + interrupts = <45 2 0 0>; + fsl,num-channels = <4>; + fsl,channel-fifo-len = <24>; + fsl,exec-units-mask = <0xfe>; + fsl,descriptor-types-mask = <0x12b0ebf>; +}; diff --git a/arch/powerpc/boot/dts/fsl/pq3-sec3.0-0.dtsi b/arch/powerpc/boot/dts/fsl/pq3-sec3.0-0.dtsi new file mode 100644 index 000000000..bba1ba44c --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/pq3-sec3.0-0.dtsi @@ -0,0 +1,45 @@ +/* + * PQ3 Sec/Crypto 3.0 device tree stub [ controller @ offset 0x30000 ] + * + * Copyright 2011 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +crypto@30000 { + compatible = "fsl,sec3.0", + "fsl,sec2.4", "fsl,sec2.2", "fsl,sec2.1", + "fsl,sec2.0"; + reg = <0x30000 0x10000>; + interrupts = <45 2 0 0 58 2 0 0>; + fsl,num-channels = <4>; + fsl,channel-fifo-len = <24>; + fsl,exec-units-mask = <0x9fe>; + fsl,descriptor-types-mask = <0x3ab0ebf>; +}; diff --git a/arch/powerpc/boot/dts/fsl/pq3-sec3.1-0.dtsi b/arch/powerpc/boot/dts/fsl/pq3-sec3.1-0.dtsi new file mode 100644 index 000000000..8f0a5669b --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/pq3-sec3.1-0.dtsi @@ -0,0 +1,45 @@ +/* + * PQ3 Sec/Crypto 3.1 device tree stub [ controller @ offset 0x30000 ] + * + * Copyright 2011 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +crypto@30000 { + compatible = "fsl,sec3.1", "fsl,sec3.0", + "fsl,sec2.4", "fsl,sec2.2", "fsl,sec2.1", + "fsl,sec2.0"; + reg = <0x30000 0x10000>; + interrupts = <45 2 0 0 58 2 0 0>; + fsl,num-channels = <4>; + fsl,channel-fifo-len = <24>; + fsl,exec-units-mask = <0xbfe>; + fsl,descriptor-types-mask = <0x3ab0ebf>; +}; diff --git a/arch/powerpc/boot/dts/fsl/pq3-sec3.3-0.dtsi b/arch/powerpc/boot/dts/fsl/pq3-sec3.3-0.dtsi new file mode 100644 index 000000000..c227f2748 --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/pq3-sec3.3-0.dtsi @@ -0,0 +1,45 @@ +/* + * PQ3 Sec/Crypto 3.3 device tree stub [ controller @ offset 0x30000 ] + * + * Copyright 2011 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +crypto@30000 { + compatible = "fsl,sec3.3", "fsl,sec3.1", "fsl,sec3.0", + "fsl,sec2.4", "fsl,sec2.2", "fsl,sec2.1", + "fsl,sec2.0"; + reg = <0x30000 0x10000>; + interrupts = <45 2 0 0 58 2 0 0>; + fsl,num-channels = <4>; + fsl,channel-fifo-len = <24>; + fsl,exec-units-mask = <0x97c>; + fsl,descriptor-types-mask = <0x3a30abf>; +}; diff --git a/arch/powerpc/boot/dts/fsl/pq3-sec4.4-0.dtsi b/arch/powerpc/boot/dts/fsl/pq3-sec4.4-0.dtsi new file mode 100644 index 000000000..bb3d8266b --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/pq3-sec4.4-0.dtsi @@ -0,0 +1,67 @@ +/* + * PQ3 Sec/Crypto 4.4 device tree stub [ controller @ offset 0x30000 ] + * + * Copyright 2011 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +crypto@30000 { + compatible = "fsl,sec-v4.4", "fsl,sec-v4.0"; + fsl,sec-era = <3>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x30000 0x10000>; + reg = <0x30000 0x10000>; + interrupts = <58 2 0 0>; + + sec_jr0: jr@1000 { + compatible = "fsl,sec-v4.4-job-ring", "fsl,sec-v4.0-job-ring"; + reg = <0x1000 0x1000>; + interrupts = <45 2 0 0>; + }; + + sec_jr1: jr@2000 { + compatible = "fsl,sec-v4.4-job-ring", "fsl,sec-v4.0-job-ring"; + reg = <0x2000 0x1000>; + interrupts = <45 2 0 0>; + }; + + sec_jr2: jr@3000 { + compatible = "fsl,sec-v4.4-job-ring", "fsl,sec-v4.0-job-ring"; + reg = <0x3000 0x1000>; + interrupts = <45 2 0 0>; + }; + + sec_jr3: jr@4000 { + compatible = "fsl,sec-v4.4-job-ring", "fsl,sec-v4.0-job-ring"; + reg = <0x4000 0x1000>; + interrupts = <45 2 0 0>; + }; +}; diff --git a/arch/powerpc/boot/dts/fsl/pq3-usb2-dr-0.dtsi b/arch/powerpc/boot/dts/fsl/pq3-usb2-dr-0.dtsi new file mode 100644 index 000000000..185ab9dc3 --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/pq3-usb2-dr-0.dtsi @@ -0,0 +1,41 @@ +/* + * PQ3 USB DR device tree stub [ controller @ offset 0x22000 ] + * + * Copyright 2011 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +usb@22000 { + compatible = "fsl-usb2-dr"; + reg = <0x22000 0x1000>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <28 0x2 0 0>; +}; diff --git a/arch/powerpc/boot/dts/fsl/pq3-usb2-dr-1.dtsi b/arch/powerpc/boot/dts/fsl/pq3-usb2-dr-1.dtsi new file mode 100644 index 000000000..fe24cd612 --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/pq3-usb2-dr-1.dtsi @@ -0,0 +1,41 @@ +/* + * PQ3 USB DR device tree stub [ controller @ offset 0x23000 ] + * + * Copyright 2011 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +usb@23000 { + compatible = "fsl-usb2-dr"; + reg = <0x23000 0x1000>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <46 0x2 0 0>; +}; diff --git a/arch/powerpc/boot/dts/fsl/qonverge-usb2-dr-0.dtsi b/arch/powerpc/boot/dts/fsl/qonverge-usb2-dr-0.dtsi new file mode 100644 index 000000000..29dad7230 --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/qonverge-usb2-dr-0.dtsi @@ -0,0 +1,41 @@ +/* + * QorIQ Qonverge USB Host device tree stub [ controller @ offset 0x210000 ] + * + * Copyright 2013 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +usb@210000 { + compatible = "fsl-usb2-dr"; + reg = <0x210000 0x1000>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <44 0x2 0 0>; +}; diff --git a/arch/powerpc/boot/dts/fsl/qoriq-bman1-portals.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-bman1-portals.dtsi new file mode 100644 index 000000000..5022432eb --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/qoriq-bman1-portals.dtsi @@ -0,0 +1,90 @@ +/* + * QorIQ BMan Portal device tree stub for 10 portals + * + * Copyright 2011 - 2014 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +&bportals { + #address-cells = <1>; + #size-cells = <1>; + compatible = "simple-bus"; + + bman-portal@0 { + compatible = "fsl,bman-portal"; + reg = <0x0 0x4000>, <0x100000 0x1000>; + interrupts = <105 2 0 0>; + }; + bman-portal@4000 { + compatible = "fsl,bman-portal"; + reg = <0x4000 0x4000>, <0x101000 0x1000>; + interrupts = <107 2 0 0>; + }; + bman-portal@8000 { + compatible = "fsl,bman-portal"; + reg = <0x8000 0x4000>, <0x102000 0x1000>; + interrupts = <109 2 0 0>; + }; + bman-portal@c000 { + compatible = "fsl,bman-portal"; + reg = <0xc000 0x4000>, <0x103000 0x1000>; + interrupts = <111 2 0 0>; + }; + bman-portal@10000 { + compatible = "fsl,bman-portal"; + reg = <0x10000 0x4000>, <0x104000 0x1000>; + interrupts = <113 2 0 0>; + }; + bman-portal@14000 { + compatible = "fsl,bman-portal"; + reg = <0x14000 0x4000>, <0x105000 0x1000>; + interrupts = <115 2 0 0>; + }; + bman-portal@18000 { + compatible = "fsl,bman-portal"; + reg = <0x18000 0x4000>, <0x106000 0x1000>; + interrupts = <117 2 0 0>; + }; + bman-portal@1c000 { + compatible = "fsl,bman-portal"; + reg = <0x1c000 0x4000>, <0x107000 0x1000>; + interrupts = <119 2 0 0>; + }; + bman-portal@20000 { + compatible = "fsl,bman-portal"; + reg = <0x20000 0x4000>, <0x108000 0x1000>; + interrupts = <121 2 0 0>; + }; + bman-portal@24000 { + compatible = "fsl,bman-portal"; + reg = <0x24000 0x4000>, <0x109000 0x1000>; + interrupts = <123 2 0 0>; + }; +}; diff --git a/arch/powerpc/boot/dts/fsl/qoriq-bman1.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-bman1.dtsi new file mode 100644 index 000000000..3b5e3504a --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/qoriq-bman1.dtsi @@ -0,0 +1,41 @@ +/* + * QorIQ BMan device tree stub [ controller @ offset 0x31a000 ] + * + * Copyright 2011 - 2014 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +bman: bman@31a000 { + compatible = "fsl,bman"; + reg = <0x31a000 0x1000>; + interrupts = <16 2 1 2>; + fsl,bman-portals = <&bportals>; + memory-region = <&bman_fbpr>; +}; diff --git a/arch/powerpc/boot/dts/fsl/qoriq-clockgen1.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-clockgen1.dtsi new file mode 100644 index 000000000..4ece1edbf --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/qoriq-clockgen1.dtsi @@ -0,0 +1,85 @@ +/* + * QorIQ clock control device tree stub [ controller @ offset 0xe1000 ] + * + * Copyright 2014 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +global-utilities@e1000 { + compatible = "fsl,qoriq-clockgen-1.0"; + ranges = <0x0 0xe1000 0x1000>; + reg = <0xe1000 0x1000>; + clock-frequency = <0>; + #address-cells = <1>; + #size-cells = <1>; + + sysclk: sysclk { + #clock-cells = <0>; + compatible = "fsl,qoriq-sysclk-1.0", "fixed-clock"; + clock-output-names = "sysclk"; + }; + pll0: pll0@800 { + #clock-cells = <1>; + reg = <0x800 0x4>; + compatible = "fsl,qoriq-core-pll-1.0"; + clocks = <&sysclk>; + clock-output-names = "pll0", "pll0-div2"; + }; + pll1: pll1@820 { + #clock-cells = <1>; + reg = <0x820 0x4>; + compatible = "fsl,qoriq-core-pll-1.0"; + clocks = <&sysclk>; + clock-output-names = "pll1", "pll1-div2"; + }; + mux0: mux0@0 { + #clock-cells = <0>; + reg = <0x0 0x4>; + compatible = "fsl,qoriq-core-mux-1.0"; + clocks = <&pll0 0>, <&pll0 1>, <&pll1 0>, <&pll1 1>; + clock-names = "pll0", "pll0-div2", "pll1", "pll1-div2"; + clock-output-names = "cmux0"; + }; + mux1: mux1@20 { + #clock-cells = <0>; + reg = <0x20 0x4>; + compatible = "fsl,qoriq-core-mux-1.0"; + clocks = <&pll0 0>, <&pll0 1>, <&pll1 0>, <&pll1 1>; + clock-names = "pll0", "pll0-div2", "pll1", "pll1-div2"; + clock-output-names = "cmux1"; + }; + platform_pll: platform-pll@c00 { + #clock-cells = <1>; + reg = <0xc00 0x4>; + compatible = "fsl,qoriq-platform-pll-1.0"; + clocks = <&sysclk>; + clock-output-names = "platform-pll", "platform-pll-div2"; + }; +}; diff --git a/arch/powerpc/boot/dts/fsl/qoriq-clockgen2.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-clockgen2.dtsi new file mode 100644 index 000000000..48e0b6e4c --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/qoriq-clockgen2.dtsi @@ -0,0 +1,68 @@ +/* + * QorIQ clock control device tree stub [ controller @ offset 0xe1000 ] + * + * Copyright 2014 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +global-utilities@e1000 { + compatible = "fsl,qoriq-clockgen-2.0"; + ranges = <0x0 0xe1000 0x1000>; + reg = <0xe1000 0x1000>; + #address-cells = <1>; + #size-cells = <1>; + + sysclk: sysclk { + #clock-cells = <0>; + compatible = "fsl,qoriq-sysclk-2.0", "fixed-clock"; + clock-output-names = "sysclk"; + }; + pll0: pll0@800 { + #clock-cells = <1>; + reg = <0x800 0x4>; + compatible = "fsl,qoriq-core-pll-2.0"; + clocks = <&sysclk>; + clock-output-names = "pll0", "pll0-div2", "pll0-div4"; + }; + pll1: pll1@820 { + #clock-cells = <1>; + reg = <0x820 0x4>; + compatible = "fsl,qoriq-core-pll-2.0"; + clocks = <&sysclk>; + clock-output-names = "pll1", "pll1-div2", "pll1-div4"; + }; + platform_pll: platform-pll@c00 { + #clock-cells = <1>; + reg = <0xc00 0x4>; + compatible = "fsl,qoriq-platform-pll-2.0"; + clocks = <&sysclk>; + clock-output-names = "platform-pll", "platform-pll-div2"; + }; +}; diff --git a/arch/powerpc/boot/dts/fsl/qoriq-dma-0.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-dma-0.dtsi new file mode 100644 index 000000000..1aebf3ea4 --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/qoriq-dma-0.dtsi @@ -0,0 +1,66 @@ +/* + * QorIQ DMA device tree stub [ controller @ offset 0x100000 ] + * + * Copyright 2011 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +dma0: dma@100300 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,eloplus-dma"; + reg = <0x100300 0x4>; + ranges = <0x0 0x100100 0x200>; + cell-index = <0>; + dma-channel@0 { + compatible = "fsl,eloplus-dma-channel"; + reg = <0x0 0x80>; + cell-index = <0>; + interrupts = <28 2 0 0>; + }; + dma-channel@80 { + compatible = "fsl,eloplus-dma-channel"; + reg = <0x80 0x80>; + cell-index = <1>; + interrupts = <29 2 0 0>; + }; + dma-channel@100 { + compatible = "fsl,eloplus-dma-channel"; + reg = <0x100 0x80>; + cell-index = <2>; + interrupts = <30 2 0 0>; + }; + dma-channel@180 { + compatible = "fsl,eloplus-dma-channel"; + reg = <0x180 0x80>; + cell-index = <3>; + interrupts = <31 2 0 0>; + }; +}; diff --git a/arch/powerpc/boot/dts/fsl/qoriq-dma-1.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-dma-1.dtsi new file mode 100644 index 000000000..ecf5e180f --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/qoriq-dma-1.dtsi @@ -0,0 +1,66 @@ +/* + * QorIQ DMA device tree stub [ controller @ offset 0x101000 ] + * + * Copyright 2011 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +dma1: dma@101300 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,eloplus-dma"; + reg = <0x101300 0x4>; + ranges = <0x0 0x101100 0x200>; + cell-index = <1>; + dma-channel@0 { + compatible = "fsl,eloplus-dma-channel"; + reg = <0x0 0x80>; + cell-index = <0>; + interrupts = <32 2 0 0>; + }; + dma-channel@80 { + compatible = "fsl,eloplus-dma-channel"; + reg = <0x80 0x80>; + cell-index = <1>; + interrupts = <33 2 0 0>; + }; + dma-channel@100 { + compatible = "fsl,eloplus-dma-channel"; + reg = <0x100 0x80>; + cell-index = <2>; + interrupts = <34 2 0 0>; + }; + dma-channel@180 { + compatible = "fsl,eloplus-dma-channel"; + reg = <0x180 0x80>; + cell-index = <3>; + interrupts = <35 2 0 0>; + }; +}; diff --git a/arch/powerpc/boot/dts/fsl/qoriq-duart-0.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-duart-0.dtsi new file mode 100644 index 000000000..225c07b4e --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/qoriq-duart-0.dtsi @@ -0,0 +1,51 @@ +/* + * QorIQ DUART device tree stub [ controller @ offset 0x11c000 ] + * + * Copyright 2011 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +serial0: serial@11c500 { + cell-index = <0>; + device_type = "serial"; + compatible = "fsl,ns16550", "ns16550"; + reg = <0x11c500 0x100>; + clock-frequency = <0>; + interrupts = <36 2 0 0>; +}; + +serial1: serial@11c600 { + cell-index = <1>; + device_type = "serial"; + compatible = "fsl,ns16550", "ns16550"; + reg = <0x11c600 0x100>; + clock-frequency = <0>; + interrupts = <36 2 0 0>; +}; diff --git a/arch/powerpc/boot/dts/fsl/qoriq-duart-1.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-duart-1.dtsi new file mode 100644 index 000000000..d23233a56 --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/qoriq-duart-1.dtsi @@ -0,0 +1,51 @@ +/* + * QorIQ DUART device tree stub [ controller @ offset 0x11d000 ] + * + * Copyright 2011 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +serial2: serial@11d500 { + cell-index = <2>; + device_type = "serial"; + compatible = "fsl,ns16550", "ns16550"; + reg = <0x11d500 0x100>; + clock-frequency = <0>; + interrupts = <37 2 0 0>; +}; + +serial3: serial@11d600 { + cell-index = <3>; + device_type = "serial"; + compatible = "fsl,ns16550", "ns16550"; + reg = <0x11d600 0x100>; + clock-frequency = <0>; + interrupts = <37 2 0 0>; +}; diff --git a/arch/powerpc/boot/dts/fsl/qoriq-esdhc-0.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-esdhc-0.dtsi new file mode 100644 index 000000000..20835ae21 --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/qoriq-esdhc-0.dtsi @@ -0,0 +1,40 @@ +/* + * QorIQ eSDHC device tree stub [ controller @ offset 0x114000 ] + * + * Copyright 2011 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +sdhc: sdhc@114000 { + compatible = "fsl,esdhc"; + reg = <0x114000 0x1000>; + interrupts = <48 2 0 0>; + clock-frequency = <0>; +}; diff --git a/arch/powerpc/boot/dts/fsl/qoriq-espi-0.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-espi-0.dtsi new file mode 100644 index 000000000..6db06975e --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/qoriq-espi-0.dtsi @@ -0,0 +1,41 @@ +/* + * QorIQ eSPI device tree stub [ controller @ offset 0x110000 ] + * + * Copyright 2011 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +spi@110000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,mpc8536-espi"; + reg = <0x110000 0x1000>; + interrupts = <53 0x2 0 0>; +}; diff --git a/arch/powerpc/boot/dts/fsl/qoriq-gpio-0.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-gpio-0.dtsi new file mode 100644 index 000000000..cf714f5f6 --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/qoriq-gpio-0.dtsi @@ -0,0 +1,41 @@ +/* + * QorIQ GPIO device tree stub [ controller @ offset 0x130000 ] + * + * Copyright 2011 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +gpio0: gpio@130000 { + compatible = "fsl,qoriq-gpio"; + reg = <0x130000 0x1000>; + interrupts = <55 2 0 0>; + #gpio-cells = <2>; + gpio-controller; +}; diff --git a/arch/powerpc/boot/dts/fsl/qoriq-gpio-1.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-gpio-1.dtsi new file mode 100644 index 000000000..c2f9cdadb --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/qoriq-gpio-1.dtsi @@ -0,0 +1,41 @@ +/* + * QorIQ GPIO device tree stub [ controller @ offset 0x131000 ] + * + * Copyright 2013 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +gpio1: gpio@131000 { + compatible = "fsl,qoriq-gpio"; + reg = <0x131000 0x1000>; + interrupts = <54 2 0 0>; + #gpio-cells = <2>; + gpio-controller; +}; diff --git a/arch/powerpc/boot/dts/fsl/qoriq-gpio-2.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-gpio-2.dtsi new file mode 100644 index 000000000..33f3ccbac --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/qoriq-gpio-2.dtsi @@ -0,0 +1,41 @@ +/* + * QorIQ GPIO device tree stub [ controller @ offset 0x132000 ] + * + * Copyright 2013 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +gpio2: gpio@132000 { + compatible = "fsl,qoriq-gpio"; + reg = <0x132000 0x1000>; + interrupts = <86 2 0 0>; + #gpio-cells = <2>; + gpio-controller; +}; diff --git a/arch/powerpc/boot/dts/fsl/qoriq-gpio-3.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-gpio-3.dtsi new file mode 100644 index 000000000..86954e95e --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/qoriq-gpio-3.dtsi @@ -0,0 +1,41 @@ +/* + * QorIQ GPIO device tree stub [ controller @ offset 0x133000 ] + * + * Copyright 2013 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +gpio3: gpio@133000 { + compatible = "fsl,qoriq-gpio"; + reg = <0x133000 0x1000>; + interrupts = <87 2 0 0>; + #gpio-cells = <2>; + gpio-controller; +}; diff --git a/arch/powerpc/boot/dts/fsl/qoriq-i2c-0.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-i2c-0.dtsi new file mode 100644 index 000000000..5f9bf7deb --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/qoriq-i2c-0.dtsi @@ -0,0 +1,53 @@ +/* + * QorIQ I2C device tree stub [ controller @ offset 0x118000 ] + * + * Copyright 2011 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +i2c@118000 { + #address-cells = <1>; + #size-cells = <0>; + cell-index = <0>; + compatible = "fsl-i2c"; + reg = <0x118000 0x100>; + interrupts = <38 2 0 0>; + dfsrr; +}; + +i2c@118100 { + #address-cells = <1>; + #size-cells = <0>; + cell-index = <1>; + compatible = "fsl-i2c"; + reg = <0x118100 0x100>; + interrupts = <38 2 0 0>; + dfsrr; +}; diff --git a/arch/powerpc/boot/dts/fsl/qoriq-i2c-1.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-i2c-1.dtsi new file mode 100644 index 000000000..7989bf5ee --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/qoriq-i2c-1.dtsi @@ -0,0 +1,53 @@ +/* + * QorIQ I2C device tree stub [ controller @ offset 0x119000 ] + * + * Copyright 2011 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +i2c@119000 { + #address-cells = <1>; + #size-cells = <0>; + cell-index = <2>; + compatible = "fsl-i2c"; + reg = <0x119000 0x100>; + interrupts = <39 2 0 0>; + dfsrr; +}; + +i2c@119100 { + #address-cells = <1>; + #size-cells = <0>; + cell-index = <3>; + compatible = "fsl-i2c"; + reg = <0x119100 0x100>; + interrupts = <39 2 0 0>; + dfsrr; +}; diff --git a/arch/powerpc/boot/dts/fsl/qoriq-mpic.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-mpic.dtsi new file mode 100644 index 000000000..08f42271f --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/qoriq-mpic.dtsi @@ -0,0 +1,106 @@ +/* + * QorIQ MPIC device tree stub [ controller @ offset 0x40000 ] + * + * Copyright 2011 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +mpic: pic@40000 { + interrupt-controller; + #address-cells = <0>; + #interrupt-cells = <4>; + reg = <0x40000 0x40000>; + compatible = "fsl,mpic", "chrp,open-pic"; + device_type = "open-pic"; + clock-frequency = <0x0>; +}; + +timer@41100 { + compatible = "fsl,mpic-global-timer"; + reg = <0x41100 0x100 0x41300 4>; + interrupts = <0 0 3 0 + 1 0 3 0 + 2 0 3 0 + 3 0 3 0>; +}; + +msi0: msi@41600 { + compatible = "fsl,mpic-msi"; + reg = <0x41600 0x200 0x44140 4>; + msi-available-ranges = <0 0x100>; + interrupts = < + 0xe0 0 0 0 + 0xe1 0 0 0 + 0xe2 0 0 0 + 0xe3 0 0 0 + 0xe4 0 0 0 + 0xe5 0 0 0 + 0xe6 0 0 0 + 0xe7 0 0 0>; +}; + +msi1: msi@41800 { + compatible = "fsl,mpic-msi"; + reg = <0x41800 0x200 0x45140 4>; + msi-available-ranges = <0 0x100>; + interrupts = < + 0xe8 0 0 0 + 0xe9 0 0 0 + 0xea 0 0 0 + 0xeb 0 0 0 + 0xec 0 0 0 + 0xed 0 0 0 + 0xee 0 0 0 + 0xef 0 0 0>; +}; + +msi2: msi@41a00 { + compatible = "fsl,mpic-msi"; + reg = <0x41a00 0x200 0x46140 4>; + msi-available-ranges = <0 0x100>; + interrupts = < + 0xf0 0 0 0 + 0xf1 0 0 0 + 0xf2 0 0 0 + 0xf3 0 0 0 + 0xf4 0 0 0 + 0xf5 0 0 0 + 0xf6 0 0 0 + 0xf7 0 0 0>; +}; + +timer@42100 { + compatible = "fsl,mpic-global-timer"; + reg = <0x42100 0x100 0x42300 4>; + interrupts = <4 0 3 0 + 5 0 3 0 + 6 0 3 0 + 7 0 3 0>; +}; diff --git a/arch/powerpc/boot/dts/fsl/qoriq-mpic4.3.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-mpic4.3.dtsi new file mode 100644 index 000000000..64f713c24 --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/qoriq-mpic4.3.dtsi @@ -0,0 +1,149 @@ +/* + * QorIQ MPIC device tree stub [ controller @ offset 0x40000 ] + * + * Copyright 2013 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +mpic: pic@40000 { + interrupt-controller; + #address-cells = <0>; + #interrupt-cells = <4>; + reg = <0x40000 0x40000>; + compatible = "fsl,mpic"; + device_type = "open-pic"; + clock-frequency = <0x0>; +}; + +timer@41100 { + compatible = "fsl,mpic-global-timer"; + reg = <0x41100 0x100 0x41300 4>; + interrupts = <0 0 3 0 + 1 0 3 0 + 2 0 3 0 + 3 0 3 0>; +}; + +msi0: msi@41600 { + compatible = "fsl,mpic-msi-v4.3"; + reg = <0x41600 0x200 0x44148 4>; + interrupts = < + 0xe0 0 0 0 + 0xe1 0 0 0 + 0xe2 0 0 0 + 0xe3 0 0 0 + 0xe4 0 0 0 + 0xe5 0 0 0 + 0xe6 0 0 0 + 0xe7 0 0 0 + 0x100 0 0 0 + 0x101 0 0 0 + 0x102 0 0 0 + 0x103 0 0 0 + 0x104 0 0 0 + 0x105 0 0 0 + 0x106 0 0 0 + 0x107 0 0 0>; +}; + +msi1: msi@41800 { + compatible = "fsl,mpic-msi-v4.3"; + reg = <0x41800 0x200 0x45148 4>; + interrupts = < + 0xe8 0 0 0 + 0xe9 0 0 0 + 0xea 0 0 0 + 0xeb 0 0 0 + 0xec 0 0 0 + 0xed 0 0 0 + 0xee 0 0 0 + 0xef 0 0 0 + 0x108 0 0 0 + 0x109 0 0 0 + 0x10a 0 0 0 + 0x10b 0 0 0 + 0x10c 0 0 0 + 0x10d 0 0 0 + 0x10e 0 0 0 + 0x10f 0 0 0>; +}; + +msi2: msi@41a00 { + compatible = "fsl,mpic-msi-v4.3"; + reg = <0x41a00 0x200 0x46148 4>; + interrupts = < + 0xf0 0 0 0 + 0xf1 0 0 0 + 0xf2 0 0 0 + 0xf3 0 0 0 + 0xf4 0 0 0 + 0xf5 0 0 0 + 0xf6 0 0 0 + 0xf7 0 0 0 + 0x110 0 0 0 + 0x111 0 0 0 + 0x112 0 0 0 + 0x113 0 0 0 + 0x114 0 0 0 + 0x115 0 0 0 + 0x116 0 0 0 + 0x117 0 0 0>; +}; + +msi3: msi@41c00 { + compatible = "fsl,mpic-msi-v4.3"; + reg = <0x41c00 0x200 0x47148 4>; + interrupts = < + 0xf8 0 0 0 + 0xf9 0 0 0 + 0xfa 0 0 0 + 0xfb 0 0 0 + 0xfc 0 0 0 + 0xfd 0 0 0 + 0xfe 0 0 0 + 0xff 0 0 0 + 0x118 0 0 0 + 0x119 0 0 0 + 0x11a 0 0 0 + 0x11b 0 0 0 + 0x11c 0 0 0 + 0x11d 0 0 0 + 0x11e 0 0 0 + 0x11f 0 0 0>; +}; + +timer@42100 { + compatible = "fsl,mpic-global-timer"; + reg = <0x42100 0x100 0x42300 4>; + interrupts = <4 0 3 0 + 5 0 3 0 + 6 0 3 0 + 7 0 3 0>; +}; diff --git a/arch/powerpc/boot/dts/fsl/qoriq-qman1-portals.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-qman1-portals.dtsi new file mode 100644 index 000000000..05d51acaf --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/qoriq-qman1-portals.dtsi @@ -0,0 +1,101 @@ +/* + * QorIQ QMan Portal device tree stub for 10 portals & 15 pool channels + * + * Copyright 2011 - 2014 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +&qportals { + #address-cells = <1>; + #size-cells = <1>; + compatible = "simple-bus"; + + qportal0: qman-portal@0 { + compatible = "fsl,qman-portal"; + reg = <0x0 0x4000>, <0x100000 0x1000>; + interrupts = <104 2 0 0>; + fsl,qman-channel-id = <0x0>; + }; + qportal1: qman-portal@4000 { + compatible = "fsl,qman-portal"; + reg = <0x4000 0x4000>, <0x101000 0x1000>; + interrupts = <106 2 0 0>; + fsl,qman-channel-id = <1>; + }; + qportal2: qman-portal@8000 { + compatible = "fsl,qman-portal"; + reg = <0x8000 0x4000>, <0x102000 0x1000>; + interrupts = <108 2 0 0>; + fsl,qman-channel-id = <2>; + }; + qportal3: qman-portal@c000 { + compatible = "fsl,qman-portal"; + reg = <0xc000 0x4000>, <0x103000 0x1000>; + interrupts = <110 2 0 0>; + fsl,qman-channel-id = <3>; + }; + qportal4: qman-portal@10000 { + compatible = "fsl,qman-portal"; + reg = <0x10000 0x4000>, <0x104000 0x1000>; + interrupts = <112 2 0 0>; + fsl,qman-channel-id = <4>; + }; + qportal5: qman-portal@14000 { + compatible = "fsl,qman-portal"; + reg = <0x14000 0x4000>, <0x105000 0x1000>; + interrupts = <114 2 0 0>; + fsl,qman-channel-id = <5>; + }; + qportal6: qman-portal@18000 { + compatible = "fsl,qman-portal"; + reg = <0x18000 0x4000>, <0x106000 0x1000>; + interrupts = <116 2 0 0>; + fsl,qman-channel-id = <6>; + }; + + qportal7: qman-portal@1c000 { + compatible = "fsl,qman-portal"; + reg = <0x1c000 0x4000>, <0x107000 0x1000>; + interrupts = <118 2 0 0>; + fsl,qman-channel-id = <7>; + }; + qportal8: qman-portal@20000 { + compatible = "fsl,qman-portal"; + reg = <0x20000 0x4000>, <0x108000 0x1000>; + interrupts = <120 2 0 0>; + fsl,qman-channel-id = <8>; + }; + qportal9: qman-portal@24000 { + compatible = "fsl,qman-portal"; + reg = <0x24000 0x4000>, <0x109000 0x1000>; + interrupts = <122 2 0 0>; + fsl,qman-channel-id = <9>; + }; +}; diff --git a/arch/powerpc/boot/dts/fsl/qoriq-qman1.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-qman1.dtsi new file mode 100644 index 000000000..0695778c4 --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/qoriq-qman1.dtsi @@ -0,0 +1,41 @@ +/* + * QorIQ QMan device tree stub [ controller @ offset 0x318000 ] + * + * Copyright 2011 - 2014 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +qman: qman@318000 { + compatible = "fsl,qman"; + reg = <0x318000 0x1000>; + interrupts = <16 2 1 3>; + fsl,qman-portals = <&qportals>; + memory-region = <&qman_fqd &qman_pfdr>; +}; diff --git a/arch/powerpc/boot/dts/fsl/qoriq-qman3.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-qman3.dtsi new file mode 100644 index 000000000..b379abd14 --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/qoriq-qman3.dtsi @@ -0,0 +1,41 @@ +/* + * QorIQ QMan rev3 device tree stub [ controller @ offset 0x318000 ] + * + * Copyright 2014 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +qman: qman@318000 { + compatible = "fsl,qman"; + reg = <0x318000 0x2000>; + interrupts = <16 2 1 3>; + fsl,qman-portals = <&qportals>; + memory-region = <&qman_fqd &qman_pfdr>; +}; diff --git a/arch/powerpc/boot/dts/fsl/qoriq-raid1.0-0.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-raid1.0-0.dtsi new file mode 100644 index 000000000..8d2e8aa6c --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/qoriq-raid1.0-0.dtsi @@ -0,0 +1,85 @@ +/* + * QorIQ RAID 1.0 device tree stub [ controller @ offset 0x320000 ] + * + * Copyright 2012 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +raideng: raideng@320000 { + compatible = "fsl,raideng-v1.0"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x320000 0x10000>; + ranges = <0 0x320000 0x10000>; + + raideng_jq0@1000 { + compatible = "fsl,raideng-v1.0-job-queue"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x1000 0x1000>; + ranges = <0x0 0x1000 0x1000>; + + raideng_jr0: jr@0 { + compatible = "fsl,raideng-v1.0-job-ring", "fsl,raideng-v1.0-hp-ring"; + reg = <0x0 0x400>; + interrupts = <139 2 0 0>; + interrupt-parent = <&mpic>; + }; + + raideng_jr1: jr@400 { + compatible = "fsl,raideng-v1.0-job-ring", "fsl,raideng-v1.0-lp-ring"; + reg = <0x400 0x400>; + interrupts = <140 2 0 0>; + interrupt-parent = <&mpic>; + }; + }; + + raideng_jq1@2000 { + compatible = "fsl,raideng-v1.0-job-queue"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x2000 0x1000>; + ranges = <0x0 0x2000 0x1000>; + + raideng_jr2: jr@0 { + compatible = "fsl,raideng-v1.0-job-ring", "fsl,raideng-v1.0-hp-ring"; + reg = <0x0 0x400>; + interrupts = <141 2 0 0>; + interrupt-parent = <&mpic>; + }; + + raideng_jr3: jr@400 { + compatible = "fsl,raideng-v1.0-job-ring", "fsl,raideng-v1.0-lp-ring"; + reg = <0x400 0x400>; + interrupts = <142 2 0 0>; + interrupt-parent = <&mpic>; + }; + }; +}; diff --git a/arch/powerpc/boot/dts/fsl/qoriq-rmu-0.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-rmu-0.dtsi new file mode 100644 index 000000000..ca7fec792 --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/qoriq-rmu-0.dtsi @@ -0,0 +1,68 @@ +/* + * QorIQ RIO Message Unit device tree stub [ controller @ offset 0xd3000 ] + * + * Copyright 2011 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +rmu: rmu@d3000 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,srio-rmu"; + reg = <0xd3000 0x500>; + ranges = <0x0 0xd3000 0x500>; + + message-unit@0 { + compatible = "fsl,srio-msg-unit"; + reg = <0x0 0x100>; + interrupts = < + 60 2 0 0 /* msg1_tx_irq */ + 61 2 0 0>;/* msg1_rx_irq */ + }; + message-unit@100 { + compatible = "fsl,srio-msg-unit"; + reg = <0x100 0x100>; + interrupts = < + 62 2 0 0 /* msg2_tx_irq */ + 63 2 0 0>;/* msg2_rx_irq */ + }; + doorbell-unit@400 { + compatible = "fsl,srio-dbell-unit"; + reg = <0x400 0x80>; + interrupts = < + 56 2 0 0 /* bell_outb_irq */ + 57 2 0 0>;/* bell_inb_irq */ + }; + port-write-unit@4e0 { + compatible = "fsl,srio-port-write-unit"; + reg = <0x4e0 0x20>; + interrupts = <16 2 1 11>; + }; +}; diff --git a/arch/powerpc/boot/dts/fsl/qoriq-sata2-0.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-sata2-0.dtsi new file mode 100644 index 000000000..b642047fd --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/qoriq-sata2-0.dtsi @@ -0,0 +1,39 @@ +/* + * QorIQ SATAv2 device tree stub [ controller @ offset 0x220000 ] + * + * Copyright 2011 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +sata@220000 { + compatible = "fsl,pq-sata-v2"; + reg = <0x220000 0x1000>; + interrupts = <68 0x2 0 0>; +}; diff --git a/arch/powerpc/boot/dts/fsl/qoriq-sata2-1.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-sata2-1.dtsi new file mode 100644 index 000000000..c57370259 --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/qoriq-sata2-1.dtsi @@ -0,0 +1,39 @@ +/* + * QorIQ SATAv2 device tree stub [ controller @ offset 0x221000 ] + * + * Copyright 2011 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +sata@221000 { + compatible = "fsl,pq-sata-v2"; + reg = <0x221000 0x1000>; + interrupts = <69 0x2 0 0>; +}; diff --git a/arch/powerpc/boot/dts/fsl/qoriq-sec4.0-0.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-sec4.0-0.dtsi new file mode 100644 index 000000000..02bee5fcb --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/qoriq-sec4.0-0.dtsi @@ -0,0 +1,101 @@ +/* + * QorIQ Sec/Crypto 4.0 device tree stub [ controller @ offset 0x300000 ] + * + * Copyright 2011 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +crypto: crypto@300000 { + compatible = "fsl,sec-v4.0"; + fsl,sec-era = <1>; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x300000 0x10000>; + ranges = <0 0x300000 0x10000>; + interrupts = <92 2 0 0>; + + sec_jr0: jr@1000 { + compatible = "fsl,sec-v4.0-job-ring"; + reg = <0x1000 0x1000>; + interrupts = <88 2 0 0>; + }; + + sec_jr1: jr@2000 { + compatible = "fsl,sec-v4.0-job-ring"; + reg = <0x2000 0x1000>; + interrupts = <89 2 0 0>; + }; + + sec_jr2: jr@3000 { + compatible = "fsl,sec-v4.0-job-ring"; + reg = <0x3000 0x1000>; + interrupts = <90 2 0 0>; + }; + + sec_jr3: jr@4000 { + compatible = "fsl,sec-v4.0-job-ring"; + reg = <0x4000 0x1000>; + interrupts = <91 2 0 0>; + }; + + rtic@6000 { + compatible = "fsl,sec-v4.0-rtic"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x6000 0x100>; + ranges = <0x0 0x6100 0xe00>; + + rtic_a: rtic-a@0 { + compatible = "fsl,sec-v4.0-rtic-memory"; + reg = <0x00 0x20 0x100 0x80>; + }; + + rtic_b: rtic-b@20 { + compatible = "fsl,sec-v4.0-rtic-memory"; + reg = <0x20 0x20 0x200 0x80>; + }; + + rtic_c: rtic-c@40 { + compatible = "fsl,sec-v4.0-rtic-memory"; + reg = <0x40 0x20 0x300 0x80>; + }; + + rtic_d: rtic-d@60 { + compatible = "fsl,sec-v4.0-rtic-memory"; + reg = <0x60 0x20 0x500 0x80>; + }; + }; +}; + +sec_mon: sec_mon@314000 { + compatible = "fsl,sec-v4.0-mon"; + reg = <0x314000 0x1000>; + interrupts = <93 2 0 0>; +}; diff --git a/arch/powerpc/boot/dts/fsl/qoriq-sec4.2-0.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-sec4.2-0.dtsi new file mode 100644 index 000000000..7f7574e53 --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/qoriq-sec4.2-0.dtsi @@ -0,0 +1,110 @@ +/* + * QorIQ Sec/Crypto 4.2 device tree stub [ controller @ offset 0x300000 ] + * + * Copyright 2011 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +crypto: crypto@300000 { + compatible = "fsl,sec-v4.2", "fsl,sec-v4.0"; + fsl,sec-era = <3>; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x300000 0x10000>; + ranges = <0 0x300000 0x10000>; + interrupts = <92 2 0 0>; + + sec_jr0: jr@1000 { + compatible = "fsl,sec-v4.2-job-ring", + "fsl,sec-v4.0-job-ring"; + reg = <0x1000 0x1000>; + interrupts = <88 2 0 0>; + }; + + sec_jr1: jr@2000 { + compatible = "fsl,sec-v4.2-job-ring", + "fsl,sec-v4.0-job-ring"; + reg = <0x2000 0x1000>; + interrupts = <89 2 0 0>; + }; + + sec_jr2: jr@3000 { + compatible = "fsl,sec-v4.2-job-ring", + "fsl,sec-v4.0-job-ring"; + reg = <0x3000 0x1000>; + interrupts = <90 2 0 0>; + }; + + sec_jr3: jr@4000 { + compatible = "fsl,sec-v4.2-job-ring", + "fsl,sec-v4.0-job-ring"; + reg = <0x4000 0x1000>; + interrupts = <91 2 0 0>; + }; + + rtic@6000 { + compatible = "fsl,sec-v4.2-rtic", + "fsl,sec-v4.0-rtic"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x6000 0x100>; + ranges = <0x0 0x6100 0xe00>; + + rtic_a: rtic-a@0 { + compatible = "fsl,sec-v4.2-rtic-memory", + "fsl,sec-v4.0-rtic-memory"; + reg = <0x00 0x20 0x100 0x80>; + }; + + rtic_b: rtic-b@20 { + compatible = "fsl,sec-v4.2-rtic-memory", + "fsl,sec-v4.0-rtic-memory"; + reg = <0x20 0x20 0x200 0x80>; + }; + + rtic_c: rtic-c@40 { + compatible = "fsl,sec-v4.2-rtic-memory", + "fsl,sec-v4.0-rtic-memory"; + reg = <0x40 0x20 0x300 0x80>; + }; + + rtic_d: rtic-d@60 { + compatible = "fsl,sec-v4.2-rtic-memory", + "fsl,sec-v4.0-rtic-memory"; + reg = <0x60 0x20 0x500 0x80>; + }; + }; +}; + +sec_mon: sec_mon@314000 { + compatible = "fsl,sec-v4.2-mon", "fsl,sec-v4.0-mon"; + reg = <0x314000 0x1000>; + interrupts = <93 2 0 0>; +}; diff --git a/arch/powerpc/boot/dts/fsl/qoriq-sec5.0-0.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-sec5.0-0.dtsi new file mode 100644 index 000000000..e298efbb0 --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/qoriq-sec5.0-0.dtsi @@ -0,0 +1,110 @@ +/* + * QorIQ Sec/Crypto 5.0 device tree stub [ controller @ offset 0x300000 ] + * + * Copyright 2012 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +crypto: crypto@300000 { + compatible = "fsl,sec-v5.0", "fsl,sec-v4.0"; + fsl,sec-era = <5>; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x300000 0x10000>; + ranges = <0 0x300000 0x10000>; + interrupts = <92 2 0 0>; + + sec_jr0: jr@1000 { + compatible = "fsl,sec-v5.0-job-ring", + "fsl,sec-v4.0-job-ring"; + reg = <0x1000 0x1000>; + interrupts = <88 2 0 0>; + }; + + sec_jr1: jr@2000 { + compatible = "fsl,sec-v5.0-job-ring", + "fsl,sec-v4.0-job-ring"; + reg = <0x2000 0x1000>; + interrupts = <89 2 0 0>; + }; + + sec_jr2: jr@3000 { + compatible = "fsl,sec-v5.0-job-ring", + "fsl,sec-v4.0-job-ring"; + reg = <0x3000 0x1000>; + interrupts = <90 2 0 0>; + }; + + sec_jr3: jr@4000 { + compatible = "fsl,sec-v5.0-job-ring", + "fsl,sec-v4.0-job-ring"; + reg = <0x4000 0x1000>; + interrupts = <91 2 0 0>; + }; + + rtic@6000 { + compatible = "fsl,sec-v5.0-rtic", + "fsl,sec-v4.0-rtic"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x6000 0x100>; + ranges = <0x0 0x6100 0xe00>; + + rtic_a: rtic-a@0 { + compatible = "fsl,sec-v5.0-rtic-memory", + "fsl,sec-v4.0-rtic-memory"; + reg = <0x00 0x20 0x100 0x80>; + }; + + rtic_b: rtic-b@20 { + compatible = "fsl,sec-v5.0-rtic-memory", + "fsl,sec-v4.0-rtic-memory"; + reg = <0x20 0x20 0x200 0x80>; + }; + + rtic_c: rtic-c@40 { + compatible = "fsl,sec-v5.0-rtic-memory", + "fsl,sec-v4.0-rtic-memory"; + reg = <0x40 0x20 0x300 0x80>; + }; + + rtic_d: rtic-d@60 { + compatible = "fsl,sec-v5.0-rtic-memory", + "fsl,sec-v4.0-rtic-memory"; + reg = <0x60 0x20 0x500 0x80>; + }; + }; +}; + +sec_mon: sec_mon@314000 { + compatible = "fsl,sec-v5.0-mon", "fsl,sec-v4.0-mon"; + reg = <0x314000 0x1000>; + interrupts = <93 2 0 0>; +}; diff --git a/arch/powerpc/boot/dts/fsl/qoriq-sec5.2-0.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-sec5.2-0.dtsi new file mode 100644 index 000000000..33ff09d52 --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/qoriq-sec5.2-0.dtsi @@ -0,0 +1,119 @@ +/* + * QorIQ Sec/Crypto 5.2 device tree stub [ controller @ offset 0x300000 ] + * + * Copyright 2011-2012 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +crypto: crypto@300000 { + compatible = "fsl,sec-v5.2", "fsl,sec-v5.0", "fsl,sec-v4.0"; + fsl,sec-era = <5>; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x300000 0x10000>; + ranges = <0 0x300000 0x10000>; + interrupts = <92 2 0 0>; + + sec_jr0: jr@1000 { + compatible = "fsl,sec-v5.2-job-ring", + "fsl,sec-v5.0-job-ring", + "fsl,sec-v4.0-job-ring"; + reg = <0x1000 0x1000>; + interrupts = <88 2 0 0>; + }; + + sec_jr1: jr@2000 { + compatible = "fsl,sec-v5.2-job-ring", + "fsl,sec-v5.0-job-ring", + "fsl,sec-v4.0-job-ring"; + reg = <0x2000 0x1000>; + interrupts = <89 2 0 0>; + }; + + sec_jr2: jr@3000 { + compatible = "fsl,sec-v5.2-job-ring", + "fsl,sec-v5.0-job-ring", + "fsl,sec-v4.0-job-ring"; + reg = <0x3000 0x1000>; + interrupts = <90 2 0 0>; + }; + + sec_jr3: jr@4000 { + compatible = "fsl,sec-v5.2-job-ring", + "fsl,sec-v5.0-job-ring", + "fsl,sec-v4.0-job-ring"; + reg = <0x4000 0x1000>; + interrupts = <91 2 0 0>; + }; + + rtic@6000 { + compatible = "fsl,sec-v5.2-rtic", + "fsl,sec-v5.0-rtic", + "fsl,sec-v4.0-rtic"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x6000 0x100>; + ranges = <0x0 0x6100 0xe00>; + + rtic_a: rtic-a@0 { + compatible = "fsl,sec-v5.2-rtic-memory", + "fsl,sec-v5.0-rtic-memory", + "fsl,sec-v4.0-rtic-memory"; + reg = <0x00 0x20 0x100 0x80>; + }; + + rtic_b: rtic-b@20 { + compatible = "fsl,sec-v5.2-rtic-memory", + "fsl,sec-v5.0-rtic-memory", + "fsl,sec-v4.0-rtic-memory"; + reg = <0x20 0x20 0x200 0x80>; + }; + + rtic_c: rtic-c@40 { + compatible = "fsl,sec-v5.2-rtic-memory", + "fsl,sec-v5.0-rtic-memory", + "fsl,sec-v4.0-rtic-memory"; + reg = <0x40 0x20 0x300 0x80>; + }; + + rtic_d: rtic-d@60 { + compatible = "fsl,sec-v5.2-rtic-memory", + "fsl,sec-v5.0-rtic-memory", + "fsl,sec-v4.0-rtic-memory"; + reg = <0x60 0x20 0x500 0x80>; + }; + }; +}; + +sec_mon: sec_mon@314000 { + compatible = "fsl,sec-v5.2-mon", "fsl,sec-v5.0-mon", "fsl,sec-v4.0-mon"; + reg = <0x314000 0x1000>; + interrupts = <93 2 0 0>; +}; diff --git a/arch/powerpc/boot/dts/fsl/qoriq-sec5.3-0.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-sec5.3-0.dtsi new file mode 100644 index 000000000..08778221c --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/qoriq-sec5.3-0.dtsi @@ -0,0 +1,119 @@ +/* + * QorIQ Sec/Crypto 5.3 device tree stub [ controller @ offset 0x300000 ] + * + * Copyright 2012 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +crypto: crypto@300000 { + compatible = "fsl,sec-v5.3", "fsl,sec-v5.0", "fsl,sec-v4.0"; + fsl,sec-era = <4>; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x300000 0x10000>; + ranges = <0 0x300000 0x10000>; + interrupts = <92 2 0 0>; + + sec_jr0: jr@1000 { + compatible = "fsl,sec-v5.3-job-ring", + "fsl,sec-v5.0-job-ring", + "fsl,sec-v4.0-job-ring"; + reg = <0x1000 0x1000>; + interrupts = <88 2 0 0>; + }; + + sec_jr1: jr@2000 { + compatible = "fsl,sec-v5.3-job-ring", + "fsl,sec-v5.0-job-ring", + "fsl,sec-v4.0-job-ring"; + reg = <0x2000 0x1000>; + interrupts = <89 2 0 0>; + }; + + sec_jr2: jr@3000 { + compatible = "fsl,sec-v5.3-job-ring", + "fsl,sec-v5.0-job-ring", + "fsl,sec-v4.0-job-ring"; + reg = <0x3000 0x1000>; + interrupts = <90 2 0 0>; + }; + + sec_jr3: jr@4000 { + compatible = "fsl,sec-v5.3-job-ring", + "fsl,sec-v5.0-job-ring", + "fsl,sec-v4.0-job-ring"; + reg = <0x4000 0x1000>; + interrupts = <91 2 0 0>; + }; + + rtic@6000 { + compatible = "fsl,sec-v5.3-rtic", + "fsl,sec-v5.0-rtic", + "fsl,sec-v4.0-rtic"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x6000 0x100>; + ranges = <0x0 0x6100 0xe00>; + + rtic_a: rtic-a@0 { + compatible = "fsl,sec-v5.3-rtic-memory", + "fsl,sec-v5.0-rtic-memory", + "fsl,sec-v4.0-rtic-memory"; + reg = <0x00 0x20 0x100 0x80>; + }; + + rtic_b: rtic-b@20 { + compatible = "fsl,sec-v5.3-rtic-memory", + "fsl,sec-v5.0-rtic-memory", + "fsl,sec-v4.0-rtic-memory"; + reg = <0x20 0x20 0x200 0x80>; + }; + + rtic_c: rtic-c@40 { + compatible = "fsl,sec-v5.3-rtic-memory", + "fsl,sec-v5.0-rtic-memory", + "fsl,sec-v4.0-rtic-memory"; + reg = <0x40 0x20 0x300 0x80>; + }; + + rtic_d: rtic-d@60 { + compatible = "fsl,sec-v5.3-rtic-memory", + "fsl,sec-v5.0-rtic-memory", + "fsl,sec-v4.0-rtic-memory"; + reg = <0x60 0x20 0x500 0x80>; + }; + }; +}; + +sec_mon: sec_mon@314000 { + compatible = "fsl,sec-v5.3-mon", "fsl,sec-v5.0-mon", "fsl,sec-v4.0-mon"; + reg = <0x314000 0x1000>; + interrupts = <93 2 0 0>; +}; diff --git a/arch/powerpc/boot/dts/fsl/qoriq-sec6.0-0.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-sec6.0-0.dtsi new file mode 100644 index 000000000..7d4a6a235 --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/qoriq-sec6.0-0.dtsi @@ -0,0 +1,57 @@ +/* + * QorIQ Sec/Crypto 6.0 device tree stub + * + * Copyright 2013 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + + compatible = "fsl,sec-v6.0", "fsl,sec-v5.0", + "fsl,sec-v4.0"; + fsl,sec-era = <6>; + #address-cells = <1>; + #size-cells = <1>; + + jr@1000 { + compatible = "fsl,sec-v6.0-job-ring", + "fsl,sec-v5.2-job-ring", + "fsl,sec-v5.0-job-ring", + "fsl,sec-v4.4-job-ring", + "fsl,sec-v4.0-job-ring"; + reg = <0x1000 0x1000>; + }; + + jr@2000 { + compatible = "fsl,sec-v6.0-job-ring", + "fsl,sec-v5.2-job-ring", + "fsl,sec-v5.0-job-ring", + "fsl,sec-v4.4-job-ring", + "fsl,sec-v4.0-job-ring"; + reg = <0x2000 0x1000>; + }; diff --git a/arch/powerpc/boot/dts/fsl/qoriq-usb2-dr-0.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-usb2-dr-0.dtsi new file mode 100644 index 000000000..4dd6f84c2 --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/qoriq-usb2-dr-0.dtsi @@ -0,0 +1,41 @@ +/* + * QorIQ USB DR device tree stub [ controller @ offset 0x211000 ] + * + * Copyright 2011 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +usb@211000 { + compatible = "fsl,mpc85xx-usb2-dr", "fsl-usb2-dr"; + reg = <0x211000 0x1000>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <45 0x2 0 0>; +}; diff --git a/arch/powerpc/boot/dts/fsl/qoriq-usb2-mph-0.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-usb2-mph-0.dtsi new file mode 100644 index 000000000..f053835aa --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/qoriq-usb2-mph-0.dtsi @@ -0,0 +1,41 @@ +/* + * QorIQ USB Host device tree stub [ controller @ offset 0x210000 ] + * + * Copyright 2011 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +usb@210000 { + compatible = "fsl,mpc85xx-usb2-mph", "fsl-usb2-mph"; + reg = <0x210000 0x1000>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <44 0x2 0 0>; +}; diff --git a/arch/powerpc/boot/dts/fsl/t1040si-post.dtsi b/arch/powerpc/boot/dts/fsl/t1040si-post.dtsi new file mode 100644 index 000000000..5cc01be5b --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/t1040si-post.dtsi @@ -0,0 +1,467 @@ +/* + * T1040 Silicon/SoC Device Tree Source (post include) + * + * Copyright 2013 - 2014 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +&bman_fbpr { + compatible = "fsl,bman-fbpr"; + alloc-ranges = <0 0 0x10000 0>; +}; + +&ifc { + #address-cells = <2>; + #size-cells = <1>; + compatible = "fsl,ifc", "simple-bus"; + interrupts = <25 2 0 0>; +}; + +&pci0 { + compatible = "fsl,t1040-pcie", "fsl,qoriq-pcie-v2.4", "fsl,qoriq-pcie"; + device_type = "pci"; + #size-cells = <2>; + #address-cells = <3>; + bus-range = <0x0 0xff>; + interrupts = <20 2 0 0>; + fsl,iommu-parent = <&pamu0>; + pcie@0 { + reg = <0 0 0 0 0>; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + device_type = "pci"; + interrupts = <20 2 0 0>; + interrupt-map-mask = <0xf800 0 0 7>; + interrupt-map = < + /* IDSEL 0x0 */ + 0000 0 0 1 &mpic 40 1 0 0 + 0000 0 0 2 &mpic 1 1 0 0 + 0000 0 0 3 &mpic 2 1 0 0 + 0000 0 0 4 &mpic 3 1 0 0 + >; + }; +}; + +&pci1 { + compatible = "fsl,t1040-pcie", "fsl,qoriq-pcie-v2.4", "fsl,qoriq-pcie"; + device_type = "pci"; + #size-cells = <2>; + #address-cells = <3>; + bus-range = <0 0xff>; + interrupts = <21 2 0 0>; + fsl,iommu-parent = <&pamu0>; + pcie@0 { + reg = <0 0 0 0 0>; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + device_type = "pci"; + interrupts = <21 2 0 0>; + interrupt-map-mask = <0xf800 0 0 7>; + interrupt-map = < + /* IDSEL 0x0 */ + 0000 0 0 1 &mpic 41 1 0 0 + 0000 0 0 2 &mpic 5 1 0 0 + 0000 0 0 3 &mpic 6 1 0 0 + 0000 0 0 4 &mpic 7 1 0 0 + >; + }; +}; + +&pci2 { + compatible = "fsl,t1040-pcie", "fsl,qoriq-pcie-v2.4", "fsl,qoriq-pcie"; + device_type = "pci"; + #size-cells = <2>; + #address-cells = <3>; + bus-range = <0x0 0xff>; + interrupts = <22 2 0 0>; + fsl,iommu-parent = <&pamu0>; + pcie@0 { + reg = <0 0 0 0 0>; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + device_type = "pci"; + interrupts = <22 2 0 0>; + interrupt-map-mask = <0xf800 0 0 7>; + interrupt-map = < + /* IDSEL 0x0 */ + 0000 0 0 1 &mpic 42 1 0 0 + 0000 0 0 2 &mpic 9 1 0 0 + 0000 0 0 3 &mpic 10 1 0 0 + 0000 0 0 4 &mpic 11 1 0 0 + >; + }; +}; + +&pci3 { + compatible = "fsl,t1040-pcie", "fsl,qoriq-pcie-v2.4", "fsl,qoriq-pcie"; + device_type = "pci"; + #size-cells = <2>; + #address-cells = <3>; + bus-range = <0x0 0xff>; + interrupts = <23 2 0 0>; + fsl,iommu-parent = <&pamu0>; + pcie@0 { + reg = <0 0 0 0 0>; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + device_type = "pci"; + interrupts = <23 2 0 0>; + interrupt-map-mask = <0xf800 0 0 7>; + interrupt-map = < + /* IDSEL 0x0 */ + 0000 0 0 1 &mpic 43 1 0 0 + 0000 0 0 2 &mpic 0 1 0 0 + 0000 0 0 3 &mpic 4 1 0 0 + 0000 0 0 4 &mpic 8 1 0 0 + >; + }; +}; + +&dcsr { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,dcsr", "simple-bus"; + + dcsr-epu@0 { + compatible = "fsl,t1040-dcsr-epu", "fsl,dcsr-epu"; + interrupts = <52 2 0 0 + 84 2 0 0 + 85 2 0 0>; + reg = <0x0 0x1000>; + }; + dcsr-npc { + compatible = "fsl,t1040-dcsr-cnpc", "fsl,dcsr-cnpc"; + reg = <0x1000 0x1000 0x1002000 0x10000>; + }; + dcsr-nxc@2000 { + compatible = "fsl,dcsr-nxc"; + reg = <0x2000 0x1000>; + }; + dcsr-corenet { + compatible = "fsl,dcsr-corenet"; + reg = <0x8000 0x1000 0x1A000 0x1000>; + }; + dcsr-dpaa@9000 { + compatible = "fsl,t1040-dcsr-dpaa", "fsl,dcsr-dpaa"; + reg = <0x9000 0x1000>; + }; + dcsr-ocn@11000 { + compatible = "fsl,t1040-dcsr-ocn", "fsl,dcsr-ocn"; + reg = <0x11000 0x1000>; + }; + dcsr-ddr@12000 { + compatible = "fsl,dcsr-ddr"; + dev-handle = <&ddr1>; + reg = <0x12000 0x1000>; + }; + dcsr-nal@18000 { + compatible = "fsl,t1040-dcsr-nal", "fsl,dcsr-nal"; + reg = <0x18000 0x1000>; + }; + dcsr-rcpm@22000 { + compatible = "fsl,t1040-dcsr-rcpm", "fsl,dcsr-rcpm"; + reg = <0x22000 0x1000>; + }; + dcsr-snpc@30000 { + compatible = "fsl,t1040-dcsr-snpc", "fsl,dcsr-snpc"; + reg = <0x30000 0x1000 0x1022000 0x10000>; + }; + dcsr-snpc@31000 { + compatible = "fsl,t1040-dcsr-snpc", "fsl,dcsr-snpc"; + reg = <0x31000 0x1000 0x1042000 0x10000>; + }; + dcsr-cpu-sb-proxy@100000 { + compatible = "fsl,dcsr-e5500-sb-proxy", "fsl,dcsr-cpu-sb-proxy"; + cpu-handle = <&cpu0>; + reg = <0x100000 0x1000 0x101000 0x1000>; + }; + dcsr-cpu-sb-proxy@108000 { + compatible = "fsl,dcsr-e5500-sb-proxy", "fsl,dcsr-cpu-sb-proxy"; + cpu-handle = <&cpu1>; + reg = <0x108000 0x1000 0x109000 0x1000>; + }; + dcsr-cpu-sb-proxy@110000 { + compatible = "fsl,dcsr-e5500-sb-proxy", "fsl,dcsr-cpu-sb-proxy"; + cpu-handle = <&cpu2>; + reg = <0x110000 0x1000 0x111000 0x1000>; + }; + dcsr-cpu-sb-proxy@118000 { + compatible = "fsl,dcsr-e5500-sb-proxy", "fsl,dcsr-cpu-sb-proxy"; + cpu-handle = <&cpu3>; + reg = <0x118000 0x1000 0x119000 0x1000>; + }; +}; + +&bportals { + #address-cells = <0x1>; + #size-cells = <0x1>; + compatible = "simple-bus"; + + bman-portal@0 { + compatible = "fsl,bman-portal"; + reg = <0x0 0x4000>, <0x1000000 0x1000>; + interrupts = <105 2 0 0>; + }; + bman-portal@4000 { + compatible = "fsl,bman-portal"; + reg = <0x4000 0x4000>, <0x1001000 0x1000>; + interrupts = <107 2 0 0>; + }; + bman-portal@8000 { + compatible = "fsl,bman-portal"; + reg = <0x8000 0x4000>, <0x1002000 0x1000>; + interrupts = <109 2 0 0>; + }; + bman-portal@c000 { + compatible = "fsl,bman-portal"; + reg = <0xc000 0x4000>, <0x1003000 0x1000>; + interrupts = <111 2 0 0>; + }; + bman-portal@10000 { + compatible = "fsl,bman-portal"; + reg = <0x10000 0x4000>, <0x1004000 0x1000>; + interrupts = <113 2 0 0>; + }; + bman-portal@14000 { + compatible = "fsl,bman-portal"; + reg = <0x14000 0x4000>, <0x1005000 0x1000>; + interrupts = <115 2 0 0>; + }; + bman-portal@18000 { + compatible = "fsl,bman-portal"; + reg = <0x18000 0x4000>, <0x1006000 0x1000>; + interrupts = <117 2 0 0>; + }; + bman-portal@1c000 { + compatible = "fsl,bman-portal"; + reg = <0x1c000 0x4000>, <0x1007000 0x1000>; + interrupts = <119 2 0 0>; + }; + bman-portal@20000 { + compatible = "fsl,bman-portal"; + reg = <0x20000 0x4000>, <0x1008000 0x1000>; + interrupts = <121 2 0 0>; + }; + bman-portal@24000 { + compatible = "fsl,bman-portal"; + reg = <0x24000 0x4000>, <0x1009000 0x1000>; + interrupts = <123 2 0 0>; + }; +}; + +&soc { + #address-cells = <1>; + #size-cells = <1>; + device_type = "soc"; + compatible = "simple-bus"; + + soc-sram-error { + compatible = "fsl,soc-sram-error"; + interrupts = <16 2 1 29>; + }; + + corenet-law@0 { + compatible = "fsl,corenet-law"; + reg = <0x0 0x1000>; + fsl,num-laws = <16>; + }; + + ddr1: memory-controller@8000 { + compatible = "fsl,qoriq-memory-controller-v5.0", + "fsl,qoriq-memory-controller"; + reg = <0x8000 0x1000>; + interrupts = <16 2 1 23>; + }; + + cpc: l3-cache-controller@10000 { + compatible = "fsl,t1040-l3-cache-controller", "cache"; + reg = <0x10000 0x1000>; + interrupts = <16 2 1 27>; + }; + + corenet-cf@18000 { + compatible = "fsl,corenet2-cf", "fsl,corenet-cf"; + reg = <0x18000 0x1000>; + interrupts = <16 2 1 31>; + fsl,ccf-num-csdids = <32>; + fsl,ccf-num-snoopids = <32>; + }; + + iommu@20000 { + compatible = "fsl,pamu-v1.0", "fsl,pamu"; + reg = <0x20000 0x1000>; + ranges = <0 0x20000 0x1000>; + #address-cells = <1>; + #size-cells = <1>; + interrupts = < + 24 2 0 0 + 16 2 1 30>; + pamu0: pamu@0 { + reg = <0 0x1000>; + fsl,primary-cache-geometry = <128 1>; + fsl,secondary-cache-geometry = <16 2>; + }; + }; + +/include/ "qoriq-mpic.dtsi" + + guts: global-utilities@e0000 { + compatible = "fsl,t1040-device-config", "fsl,qoriq-device-config-2.0"; + reg = <0xe0000 0xe00>; + fsl,has-rstcr; + fsl,liodn-bits = <12>; + }; + +/include/ "qoriq-clockgen2.dtsi" + global-utilities@e1000 { + compatible = "fsl,t1040-clockgen", "fsl,qoriq-clockgen-2.0"; + + mux0: mux0@0 { + #clock-cells = <0>; + reg = <0x0 4>; + compatible = "fsl,qoriq-core-mux-2.0"; + clocks = <&pll0 0>, <&pll0 1>, <&pll0 2>, + <&pll1 0>, <&pll1 1>, <&pll1 2>; + clock-names = "pll0", "pll0-div2", "pll1-div4", + "pll1", "pll1-div2", "pll1-div4"; + clock-output-names = "cmux0"; + }; + + mux1: mux1@20 { + #clock-cells = <0>; + reg = <0x20 4>; + compatible = "fsl,qoriq-core-mux-2.0"; + clocks = <&pll0 0>, <&pll0 1>, <&pll0 2>, + <&pll1 0>, <&pll1 1>, <&pll1 2>; + clock-names = "pll0", "pll0-div2", "pll1-div4", + "pll1", "pll1-div2", "pll1-div4"; + clock-output-names = "cmux1"; + }; + + mux2: mux2@40 { + #clock-cells = <0>; + reg = <0x40 4>; + compatible = "fsl,qoriq-core-mux-2.0"; + clocks = <&pll0 0>, <&pll0 1>, <&pll0 2>, + <&pll1 0>, <&pll1 1>, <&pll1 2>; + clock-names = "pll0", "pll0-div2", "pll1-div4", + "pll1", "pll1-div2", "pll1-div4"; + clock-output-names = "cmux2"; + }; + + mux3: mux3@60 { + #clock-cells = <0>; + reg = <0x60 4>; + compatible = "fsl,qoriq-core-mux-2.0"; + clocks = <&pll0 0>, <&pll0 1>, <&pll0 2>, + <&pll1 0>, <&pll1 1>, <&pll1 2>; + clock-names = "pll0_0", "pll0_1", "pll0_2", + "pll1_0", "pll1_1", "pll1_2"; + clock-output-names = "cmux3"; + }; + }; + + rcpm: global-utilities@e2000 { + compatible = "fsl,t1040-rcpm", "fsl,qoriq-rcpm-2.0"; + reg = <0xe2000 0x1000>; + }; + + sfp: sfp@e8000 { + compatible = "fsl,t1040-sfp"; + reg = <0xe8000 0x1000>; + }; + + serdes: serdes@ea000 { + compatible = "fsl,t1040-serdes"; + reg = <0xea000 0x4000>; + }; + +/include/ "elo3-dma-0.dtsi" +/include/ "elo3-dma-1.dtsi" +/include/ "qoriq-espi-0.dtsi" + spi@110000 { + fsl,espi-num-chipselects = <4>; + }; + +/include/ "qoriq-esdhc-0.dtsi" + sdhc@114000 { + compatible = "fsl,t1040-esdhc", "fsl,esdhc"; + fsl,iommu-parent = <&pamu0>; + fsl,liodn-reg = <&guts 0x530>; /* eSDHCLIODNR */ + sdhci,auto-cmd12; + }; +/include/ "qoriq-i2c-0.dtsi" +/include/ "qoriq-i2c-1.dtsi" +/include/ "qoriq-duart-0.dtsi" +/include/ "qoriq-duart-1.dtsi" +/include/ "qoriq-gpio-0.dtsi" +/include/ "qoriq-gpio-1.dtsi" +/include/ "qoriq-gpio-2.dtsi" +/include/ "qoriq-gpio-3.dtsi" +/include/ "qoriq-usb2-mph-0.dtsi" + usb0: usb@210000 { + compatible = "fsl-usb2-mph-v2.4", "fsl-usb2-mph"; + fsl,iommu-parent = <&pamu0>; + fsl,liodn-reg = <&guts 0x520>; /* USB1LIODNR */ + phy_type = "utmi"; + port0; + }; +/include/ "qoriq-usb2-dr-0.dtsi" + usb1: usb@211000 { + compatible = "fsl-usb2-dr-v2.4", "fsl-usb2-dr"; + fsl,iommu-parent = <&pamu0>; + fsl,liodn-reg = <&guts 0x524>; /* USB2LIODNR */ + dr_mode = "host"; + phy_type = "utmi"; + }; + + display@180000 { + compatible = "fsl,t1040-diu", "fsl,diu"; + reg = <0x180000 1000>; + interrupts = <74 2 0 0>; + }; + +/include/ "qoriq-sata2-0.dtsi" + sata@220000 { + fsl,iommu-parent = <&pamu0>; + fsl,liodn-reg = <&guts 0x550>; /* SATA1LIODNR */ + }; +/include/ "qoriq-sata2-1.dtsi" + sata@221000 { + fsl,iommu-parent = <&pamu0>; + fsl,liodn-reg = <&guts 0x554>; /* SATA2LIODNR */ + }; +/include/ "qoriq-sec5.0-0.dtsi" +/include/ "qoriq-bman1.dtsi" +}; diff --git a/arch/powerpc/boot/dts/fsl/t1042si-post.dtsi b/arch/powerpc/boot/dts/fsl/t1042si-post.dtsi new file mode 100644 index 000000000..319b74f29 --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/t1042si-post.dtsi @@ -0,0 +1,37 @@ +/* + * T1042 Silicon/SoC Device Tree Source (post include) + * + * Copyright 2013 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +/include/ "t1040si-post.dtsi" + +/* Place holder for ethernet related device tree nodes */ diff --git a/arch/powerpc/boot/dts/fsl/t104xsi-pre.dtsi b/arch/powerpc/boot/dts/fsl/t104xsi-pre.dtsi new file mode 100644 index 000000000..bbb7025ca --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/t104xsi-pre.dtsi @@ -0,0 +1,104 @@ +/* + * T1040/T1042 Silicon/SoC Device Tree Source (pre include) + * + * Copyright 2013 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +/dts-v1/; + +/include/ "e5500_power_isa.dtsi" + +/ { + #address-cells = <2>; + #size-cells = <2>; + interrupt-parent = <&mpic>; + + aliases { + ccsr = &soc; + dcsr = &dcsr; + + serial0 = &serial0; + serial1 = &serial1; + serial2 = &serial2; + serial3 = &serial3; + pci0 = &pci0; + pci1 = &pci1; + pci2 = &pci2; + pci3 = &pci3; + usb0 = &usb0; + usb1 = &usb1; + sdhc = &sdhc; + + crypto = &crypto; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu0: PowerPC,e5500@0 { + device_type = "cpu"; + reg = <0>; + clocks = <&mux0>; + next-level-cache = <&L2_1>; + L2_1: l2-cache { + next-level-cache = <&cpc>; + }; + }; + cpu1: PowerPC,e5500@1 { + device_type = "cpu"; + reg = <1>; + clocks = <&mux1>; + next-level-cache = <&L2_2>; + L2_2: l2-cache { + next-level-cache = <&cpc>; + }; + }; + cpu2: PowerPC,e5500@2 { + device_type = "cpu"; + reg = <2>; + clocks = <&mux2>; + next-level-cache = <&L2_3>; + L2_3: l2-cache { + next-level-cache = <&cpc>; + }; + }; + cpu3: PowerPC,e5500@3 { + device_type = "cpu"; + reg = <3>; + clocks = <&mux3>; + next-level-cache = <&L2_4>; + L2_4: l2-cache { + next-level-cache = <&cpc>; + }; + }; + }; +}; diff --git a/arch/powerpc/boot/dts/fsl/t2080si-post.dtsi b/arch/powerpc/boot/dts/fsl/t2080si-post.dtsi new file mode 100644 index 000000000..082ec2044 --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/t2080si-post.dtsi @@ -0,0 +1,69 @@ +/* + * T2080 Silicon/SoC Device Tree Source (post include) + * + * Copyright 2013 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor "AS IS" AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +/include/ "t2081si-post.dtsi" + +&soc { +/include/ "qoriq-sata2-0.dtsi" + sata@220000 { + fsl,iommu-parent = <&pamu1>; + fsl,liodn-reg = <&guts 0x550>; /* SATA1LIODNR */ + }; + +/include/ "qoriq-sata2-1.dtsi" + sata@221000 { + fsl,iommu-parent = <&pamu1>; + fsl,liodn-reg = <&guts 0x554>; /* SATA2LIODNR */ + }; +}; + +&rio { + compatible = "fsl,srio"; + interrupts = <16 2 1 11>; + #address-cells = <2>; + #size-cells = <2>; + ranges; + + port1 { + #address-cells = <2>; + #size-cells = <2>; + cell-index = <1>; + }; + + port2 { + #address-cells = <2>; + #size-cells = <2>; + cell-index = <2>; + }; +}; diff --git a/arch/powerpc/boot/dts/fsl/t2081si-post.dtsi b/arch/powerpc/boot/dts/fsl/t2081si-post.dtsi new file mode 100644 index 000000000..86bdaf6cb --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/t2081si-post.dtsi @@ -0,0 +1,513 @@ +/* + * T2081 Silicon/SoC Device Tree Source (post include) + * + * Copyright 2013 - 2014 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor "AS IS" AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +&bman_fbpr { + compatible = "fsl,bman-fbpr"; + alloc-ranges = <0 0 0x10000 0>; +}; + +&ifc { + #address-cells = <2>; + #size-cells = <1>; + compatible = "fsl,ifc", "simple-bus"; + interrupts = <25 2 0 0>; +}; + +/* controller at 0x240000 */ +&pci0 { + compatible = "fsl,t2080-pcie", "fsl,qoriq-pcie-v3.0", "fsl,qoriq-pcie"; + device_type = "pci"; + #size-cells = <2>; + #address-cells = <3>; + bus-range = <0x0 0xff>; + interrupts = <20 2 0 0>; + fsl,iommu-parent = <&pamu0>; + pcie@0 { + reg = <0 0 0 0 0>; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + device_type = "pci"; + interrupts = <20 2 0 0>; + interrupt-map-mask = <0xf800 0 0 7>; + interrupt-map = < + /* IDSEL 0x0 */ + 0000 0 0 1 &mpic 40 1 0 0 + 0000 0 0 2 &mpic 1 1 0 0 + 0000 0 0 3 &mpic 2 1 0 0 + 0000 0 0 4 &mpic 3 1 0 0 + >; + }; +}; + +/* controller at 0x250000 */ +&pci1 { + compatible = "fsl,t2080-pcie", "fsl,qoriq-pcie-v3.0", "fsl,qoriq-pcie"; + device_type = "pci"; + #size-cells = <2>; + #address-cells = <3>; + bus-range = <0 0xff>; + interrupts = <21 2 0 0>; + fsl,iommu-parent = <&pamu0>; + pcie@0 { + reg = <0 0 0 0 0>; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + device_type = "pci"; + interrupts = <21 2 0 0>; + interrupt-map-mask = <0xf800 0 0 7>; + interrupt-map = < + /* IDSEL 0x0 */ + 0000 0 0 1 &mpic 41 1 0 0 + 0000 0 0 2 &mpic 5 1 0 0 + 0000 0 0 3 &mpic 6 1 0 0 + 0000 0 0 4 &mpic 7 1 0 0 + >; + }; +}; + +/* controller at 0x260000 */ +&pci2 { + compatible = "fsl,t2080-pcie", "fsl,qoriq-pcie-v3.0", "fsl,qoriq-pcie"; + device_type = "pci"; + #size-cells = <2>; + #address-cells = <3>; + bus-range = <0x0 0xff>; + interrupts = <22 2 0 0>; + fsl,iommu-parent = <&pamu0>; + pcie@0 { + reg = <0 0 0 0 0>; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + device_type = "pci"; + interrupts = <22 2 0 0>; + interrupt-map-mask = <0xf800 0 0 7>; + interrupt-map = < + /* IDSEL 0x0 */ + 0000 0 0 1 &mpic 42 1 0 0 + 0000 0 0 2 &mpic 9 1 0 0 + 0000 0 0 3 &mpic 10 1 0 0 + 0000 0 0 4 &mpic 11 1 0 0 + >; + }; +}; + +/* controller at 0x270000 */ +&pci3 { + compatible = "fsl,t2080-pcie", "fsl,qoriq-pcie-v3.0", "fsl,qoriq-pcie"; + device_type = "pci"; + #size-cells = <2>; + #address-cells = <3>; + bus-range = <0x0 0xff>; + interrupts = <23 2 0 0>; + fsl,iommu-parent = <&pamu0>; + pcie@0 { + reg = <0 0 0 0 0>; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + device_type = "pci"; + interrupts = <23 2 0 0>; + interrupt-map-mask = <0xf800 0 0 7>; + interrupt-map = < + /* IDSEL 0x0 */ + 0000 0 0 1 &mpic 43 1 0 0 + 0000 0 0 2 &mpic 0 1 0 0 + 0000 0 0 3 &mpic 4 1 0 0 + 0000 0 0 4 &mpic 8 1 0 0 + >; + }; +}; + +&dcsr { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,dcsr", "simple-bus"; + + dcsr-epu@0 { + compatible = "fsl,t2080-dcsr-epu", "fsl,dcsr-epu"; + interrupts = <52 2 0 0 + 84 2 0 0 + 85 2 0 0 + 94 2 0 0 + 95 2 0 0>; + reg = <0x0 0x1000>; + }; + dcsr-npc { + compatible = "fsl,t2080-dcsr-cnpc", "fsl,dcsr-cnpc"; + reg = <0x1000 0x1000 0x1002000 0x10000>; + }; + dcsr-nxc@2000 { + compatible = "fsl,dcsr-nxc"; + reg = <0x2000 0x1000>; + }; + dcsr-corenet { + compatible = "fsl,dcsr-corenet"; + reg = <0x8000 0x1000 0x1A000 0x1000>; + }; + dcsr-ocn@11000 { + compatible = "fsl,t2080-dcsr-ocn", "fsl,dcsr-ocn"; + reg = <0x11000 0x1000>; + }; + dcsr-ddr@12000 { + compatible = "fsl,dcsr-ddr"; + dev-handle = <&ddr1>; + reg = <0x12000 0x1000>; + }; + dcsr-nal@18000 { + compatible = "fsl,t2080-dcsr-nal", "fsl,dcsr-nal"; + reg = <0x18000 0x1000>; + }; + dcsr-rcpm@22000 { + compatible = "fsl,t2080-dcsr-rcpm", "fsl,dcsr-rcpm"; + reg = <0x22000 0x1000>; + }; + dcsr-snpc@30000 { + compatible = "fsl,t2080-dcsr-snpc", "fsl,dcsr-snpc"; + reg = <0x30000 0x1000 0x1022000 0x10000>; + }; + dcsr-snpc@31000 { + compatible = "fsl,t2080-dcsr-snpc", "fsl,dcsr-snpc"; + reg = <0x31000 0x1000 0x1042000 0x10000>; + }; + dcsr-snpc@32000 { + compatible = "fsl,t2080-dcsr-snpc", "fsl,dcsr-snpc"; + reg = <0x32000 0x1000 0x1062000 0x10000>; + }; + dcsr-cpu-sb-proxy@100000 { + compatible = "fsl,dcsr-e6500-sb-proxy", "fsl,dcsr-cpu-sb-proxy"; + cpu-handle = <&cpu0>; + reg = <0x100000 0x1000 0x101000 0x1000>; + }; + dcsr-cpu-sb-proxy@108000 { + compatible = "fsl,dcsr-e6500-sb-proxy", "fsl,dcsr-cpu-sb-proxy"; + cpu-handle = <&cpu1>; + reg = <0x108000 0x1000 0x109000 0x1000>; + }; + dcsr-cpu-sb-proxy@110000 { + compatible = "fsl,dcsr-e6500-sb-proxy", "fsl,dcsr-cpu-sb-proxy"; + cpu-handle = <&cpu2>; + reg = <0x110000 0x1000 0x111000 0x1000>; + }; + dcsr-cpu-sb-proxy@118000 { + compatible = "fsl,dcsr-e6500-sb-proxy", "fsl,dcsr-cpu-sb-proxy"; + cpu-handle = <&cpu3>; + reg = <0x118000 0x1000 0x119000 0x1000>; + }; +}; + +&bportals { + #address-cells = <0x1>; + #size-cells = <0x1>; + compatible = "simple-bus"; + + bman-portal@0 { + compatible = "fsl,bman-portal"; + reg = <0x0 0x4000>, <0x1000000 0x1000>; + interrupts = <105 2 0 0>; + }; + bman-portal@4000 { + compatible = "fsl,bman-portal"; + reg = <0x4000 0x4000>, <0x1001000 0x1000>; + interrupts = <107 2 0 0>; + }; + bman-portal@8000 { + compatible = "fsl,bman-portal"; + reg = <0x8000 0x4000>, <0x1002000 0x1000>; + interrupts = <109 2 0 0>; + }; + bman-portal@c000 { + compatible = "fsl,bman-portal"; + reg = <0xc000 0x4000>, <0x1003000 0x1000>; + interrupts = <111 2 0 0>; + }; + bman-portal@10000 { + compatible = "fsl,bman-portal"; + reg = <0x10000 0x4000>, <0x1004000 0x1000>; + interrupts = <113 2 0 0>; + }; + bman-portal@14000 { + compatible = "fsl,bman-portal"; + reg = <0x14000 0x4000>, <0x1005000 0x1000>; + interrupts = <115 2 0 0>; + }; + bman-portal@18000 { + compatible = "fsl,bman-portal"; + reg = <0x18000 0x4000>, <0x1006000 0x1000>; + interrupts = <117 2 0 0>; + }; + bman-portal@1c000 { + compatible = "fsl,bman-portal"; + reg = <0x1c000 0x4000>, <0x1007000 0x1000>; + interrupts = <119 2 0 0>; + }; + bman-portal@20000 { + compatible = "fsl,bman-portal"; + reg = <0x20000 0x4000>, <0x1008000 0x1000>; + interrupts = <121 2 0 0>; + }; + bman-portal@24000 { + compatible = "fsl,bman-portal"; + reg = <0x24000 0x4000>, <0x1009000 0x1000>; + interrupts = <123 2 0 0>; + }; + bman-portal@28000 { + compatible = "fsl,bman-portal"; + reg = <0x28000 0x4000>, <0x100a000 0x1000>; + interrupts = <125 2 0 0>; + }; + bman-portal@2c000 { + compatible = "fsl,bman-portal"; + reg = <0x2c000 0x4000>, <0x100b000 0x1000>; + interrupts = <127 2 0 0>; + }; + bman-portal@30000 { + compatible = "fsl,bman-portal"; + reg = <0x30000 0x4000>, <0x100c000 0x1000>; + interrupts = <129 2 0 0>; + }; + bman-portal@34000 { + compatible = "fsl,bman-portal"; + reg = <0x34000 0x4000>, <0x100d000 0x1000>; + interrupts = <131 2 0 0>; + }; + bman-portal@38000 { + compatible = "fsl,bman-portal"; + reg = <0x38000 0x4000>, <0x100e000 0x1000>; + interrupts = <133 2 0 0>; + }; + bman-portal@3c000 { + compatible = "fsl,bman-portal"; + reg = <0x3c000 0x4000>, <0x100f000 0x1000>; + interrupts = <135 2 0 0>; + }; + bman-portal@40000 { + compatible = "fsl,bman-portal"; + reg = <0x40000 0x4000>, <0x1010000 0x1000>; + interrupts = <137 2 0 0>; + }; + bman-portal@44000 { + compatible = "fsl,bman-portal"; + reg = <0x44000 0x4000>, <0x1011000 0x1000>; + interrupts = <139 2 0 0>; + }; +}; + +&soc { + #address-cells = <1>; + #size-cells = <1>; + device_type = "soc"; + compatible = "simple-bus"; + + soc-sram-error { + compatible = "fsl,soc-sram-error"; + interrupts = <16 2 1 29>; + }; + + corenet-law@0 { + compatible = "fsl,corenet-law"; + reg = <0x0 0x1000>; + fsl,num-laws = <32>; + }; + + ddr1: memory-controller@8000 { + compatible = "fsl,qoriq-memory-controller-v4.7", + "fsl,qoriq-memory-controller"; + reg = <0x8000 0x1000>; + interrupts = <16 2 1 23>; + }; + + cpc: l3-cache-controller@10000 { + compatible = "fsl,t2080-l3-cache-controller", "cache"; + reg = <0x10000 0x1000 + 0x11000 0x1000 + 0x12000 0x1000>; + interrupts = <16 2 1 27 + 16 2 1 26 + 16 2 1 25>; + }; + + corenet-cf@18000 { + compatible = "fsl,corenet2-cf", "fsl,corenet-cf"; + reg = <0x18000 0x1000>; + interrupts = <16 2 1 31>; + fsl,ccf-num-csdids = <32>; + fsl,ccf-num-snoopids = <32>; + }; + + iommu@20000 { + compatible = "fsl,pamu-v1.0", "fsl,pamu"; + reg = <0x20000 0x3000>; + fsl,portid-mapping = <0x8000>; + ranges = <0 0x20000 0x3000>; + #address-cells = <1>; + #size-cells = <1>; + interrupts = < + 24 2 0 0 + 16 2 1 30>; + + pamu0: pamu@0 { + reg = <0 0x1000>; + fsl,primary-cache-geometry = <32 1>; + fsl,secondary-cache-geometry = <128 2>; + }; + + pamu1: pamu@1000 { + reg = <0x1000 0x1000>; + fsl,primary-cache-geometry = <32 1>; + fsl,secondary-cache-geometry = <128 2>; + }; + + pamu2: pamu@2000 { + reg = <0x2000 0x1000>; + fsl,primary-cache-geometry = <32 1>; + fsl,secondary-cache-geometry = <128 2>; + }; + }; + +/include/ "qoriq-mpic4.3.dtsi" + + guts: global-utilities@e0000 { + compatible = "fsl,t2080-device-config", "fsl,qoriq-device-config-2.0"; + reg = <0xe0000 0xe00>; + fsl,has-rstcr; + fsl,liodn-bits = <12>; + }; + +/include/ "qoriq-clockgen2.dtsi" + global-utilities@e1000 { + compatible = "fsl,t2080-clockgen", "fsl,qoriq-clockgen-2.0"; + + mux0: mux0@0 { + #clock-cells = <0>; + reg = <0x0 4>; + compatible = "fsl,qoriq-core-mux-2.0"; + clocks = <&pll0 0>, <&pll0 1>, <&pll0 2>, + <&pll1 0>, <&pll1 1>, <&pll1 2>; + clock-names = "pll0", "pll0-div2", "pll1-div4", + "pll1", "pll1-div2", "pll1-div4"; + clock-output-names = "cmux0"; + }; + + mux1: mux1@20 { + #clock-cells = <0>; + reg = <0x20 4>; + compatible = "fsl,qoriq-core-mux-2.0"; + clocks = <&pll0 0>, <&pll0 1>, <&pll0 2>, + <&pll1 0>, <&pll1 1>, <&pll1 2>; + clock-names = "pll0", "pll0-div2", "pll1-div4", + "pll1", "pll1-div2", "pll1-div4"; + clock-output-names = "cmux1"; + }; + }; + + rcpm: global-utilities@e2000 { + compatible = "fsl,t2080-rcpm", "fsl,qoriq-rcpm-2.0"; + reg = <0xe2000 0x1000>; + }; + + sfp: sfp@e8000 { + compatible = "fsl,t2080-sfp"; + reg = <0xe8000 0x1000>; + }; + + serdes: serdes@ea000 { + compatible = "fsl,t2080-serdes"; + reg = <0xea000 0x4000>; + }; + +/include/ "elo3-dma-0.dtsi" + dma@100300 { + fsl,iommu-parent = <&pamu0>; + fsl,liodn-reg = <&guts 0x580>; /* DMA1LIODNR */ + }; +/include/ "elo3-dma-1.dtsi" + dma@101300 { + fsl,iommu-parent = <&pamu0>; + fsl,liodn-reg = <&guts 0x584>; /* DMA2LIODNR */ + }; +/include/ "elo3-dma-2.dtsi" + dma@102300 { + fsl,iommu-parent = <&pamu0>; + fsl,liodn-reg = <&guts 0x588>; /* DMA3LIODNR */ + }; + +/include/ "qoriq-espi-0.dtsi" + spi@110000 { + fsl,espi-num-chipselects = <4>; + }; + +/include/ "qoriq-esdhc-0.dtsi" + sdhc@114000 { + compatible = "fsl,t2080-esdhc", "fsl,esdhc"; + fsl,iommu-parent = <&pamu1>; + fsl,liodn-reg = <&guts 0x530>; /* SDMMCLIODNR */ + sdhci,auto-cmd12; + }; +/include/ "qoriq-i2c-0.dtsi" +/include/ "qoriq-i2c-1.dtsi" +/include/ "qoriq-duart-0.dtsi" +/include/ "qoriq-duart-1.dtsi" +/include/ "qoriq-gpio-0.dtsi" +/include/ "qoriq-gpio-1.dtsi" +/include/ "qoriq-gpio-2.dtsi" +/include/ "qoriq-gpio-3.dtsi" +/include/ "qoriq-usb2-mph-0.dtsi" + usb0: usb@210000 { + compatible = "fsl-usb2-mph-v2.5", "fsl-usb2-mph"; + fsl,iommu-parent = <&pamu1>; + fsl,liodn-reg = <&guts 0x520>; /* USB1LIODNR */ + phy_type = "utmi"; + port0; + }; +/include/ "qoriq-usb2-dr-0.dtsi" + usb1: usb@211000 { + compatible = "fsl-usb2-dr-v2.5", "fsl-usb2-dr"; + fsl,iommu-parent = <&pamu1>; + fsl,liodn-reg = <&guts 0x524>; /* USB1LIODNR */ + dr_mode = "host"; + phy_type = "utmi"; + }; +/include/ "qoriq-sec5.2-0.dtsi" +/include/ "qoriq-bman1.dtsi" + + L2_1: l2-cache-controller@c20000 { + /* Cluster 0 L2 cache */ + compatible = "fsl,t2080-l2-cache-controller"; + reg = <0xc20000 0x40000>; + next-level-cache = <&cpc>; + }; +}; diff --git a/arch/powerpc/boot/dts/fsl/t208xsi-pre.dtsi b/arch/powerpc/boot/dts/fsl/t208xsi-pre.dtsi new file mode 100644 index 000000000..e71ceb0e1 --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/t208xsi-pre.dtsi @@ -0,0 +1,99 @@ +/* + * T2080/T2081 Silicon/SoC Device Tree Source (pre include) + * + * Copyright 2013 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor "AS IS" AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +/dts-v1/; + +/include/ "e6500_power_isa.dtsi" + +/ { + #address-cells = <2>; + #size-cells = <2>; + interrupt-parent = <&mpic>; + + aliases { + ccsr = &soc; + dcsr = &dcsr; + + serial0 = &serial0; + serial1 = &serial1; + serial2 = &serial2; + serial3 = &serial3; + + crypto = &crypto; + pci0 = &pci0; + pci1 = &pci1; + pci2 = &pci2; + pci3 = &pci3; + usb0 = &usb0; + usb1 = &usb1; + dma0 = &dma0; + dma1 = &dma1; + dma2 = &dma2; + sdhc = &sdhc; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu0: PowerPC,e6500@0 { + device_type = "cpu"; + reg = <0 1>; + clocks = <&mux0>; + next-level-cache = <&L2_1>; + fsl,portid-mapping = <0x80000000>; + }; + cpu1: PowerPC,e6500@2 { + device_type = "cpu"; + reg = <2 3>; + clocks = <&mux0>; + next-level-cache = <&L2_1>; + fsl,portid-mapping = <0x80000000>; + }; + cpu2: PowerPC,e6500@4 { + device_type = "cpu"; + reg = <4 5>; + clocks = <&mux0>; + next-level-cache = <&L2_1>; + fsl,portid-mapping = <0x80000000>; + }; + cpu3: PowerPC,e6500@6 { + device_type = "cpu"; + reg = <6 7>; + clocks = <&mux0>; + next-level-cache = <&L2_1>; + fsl,portid-mapping = <0x80000000>; + }; + }; +}; diff --git a/arch/powerpc/boot/dts/fsl/t4240si-post.dtsi b/arch/powerpc/boot/dts/fsl/t4240si-post.dtsi new file mode 100644 index 000000000..4d4f25895 --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/t4240si-post.dtsi @@ -0,0 +1,768 @@ +/* + * T4240 Silicon/SoC Device Tree Source (post include) + * + * Copyright 2012 - 2014 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +&bman_fbpr { + compatible = "fsl,bman-fbpr"; + alloc-ranges = <0 0 0x10000 0>; +}; + +&ifc { + #address-cells = <2>; + #size-cells = <1>; + compatible = "fsl,ifc", "simple-bus"; + interrupts = <25 2 0 0>; +}; + +/* controller at 0x240000 */ +&pci0 { + compatible = "fsl,t4240-pcie", "fsl,qoriq-pcie-v3.0"; + device_type = "pci"; + #size-cells = <2>; + #address-cells = <3>; + bus-range = <0x0 0xff>; + interrupts = <20 2 0 0>; + pcie@0 { + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + device_type = "pci"; + reg = <0 0 0 0 0>; + interrupts = <20 2 0 0>; + interrupt-map-mask = <0xf800 0 0 7>; + interrupt-map = < + /* IDSEL 0x0 */ + 0000 0 0 1 &mpic 40 1 0 0 + 0000 0 0 2 &mpic 1 1 0 0 + 0000 0 0 3 &mpic 2 1 0 0 + 0000 0 0 4 &mpic 3 1 0 0 + >; + }; +}; + +/* controller at 0x250000 */ +&pci1 { + compatible = "fsl,t4240-pcie", "fsl,qoriq-pcie-v3.0"; + device_type = "pci"; + #size-cells = <2>; + #address-cells = <3>; + bus-range = <0 0xff>; + interrupts = <21 2 0 0>; + pcie@0 { + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + device_type = "pci"; + reg = <0 0 0 0 0>; + interrupts = <21 2 0 0>; + interrupt-map-mask = <0xf800 0 0 7>; + interrupt-map = < + /* IDSEL 0x0 */ + 0000 0 0 1 &mpic 41 1 0 0 + 0000 0 0 2 &mpic 5 1 0 0 + 0000 0 0 3 &mpic 6 1 0 0 + 0000 0 0 4 &mpic 7 1 0 0 + >; + }; +}; + +/* controller at 0x260000 */ +&pci2 { + compatible = "fsl,t4240-pcie", "fsl,qoriq-pcie-v3.0"; + device_type = "pci"; + #size-cells = <2>; + #address-cells = <3>; + bus-range = <0x0 0xff>; + interrupts = <22 2 0 0>; + pcie@0 { + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + device_type = "pci"; + reg = <0 0 0 0 0>; + interrupts = <22 2 0 0>; + interrupt-map-mask = <0xf800 0 0 7>; + interrupt-map = < + /* IDSEL 0x0 */ + 0000 0 0 1 &mpic 42 1 0 0 + 0000 0 0 2 &mpic 9 1 0 0 + 0000 0 0 3 &mpic 10 1 0 0 + 0000 0 0 4 &mpic 11 1 0 0 + >; + }; +}; + +/* controller at 0x270000 */ +&pci3 { + compatible = "fsl,t4240-pcie", "fsl,qoriq-pcie-v3.0"; + device_type = "pci"; + #size-cells = <2>; + #address-cells = <3>; + bus-range = <0x0 0xff>; + interrupts = <23 2 0 0>; + pcie@0 { + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + device_type = "pci"; + reg = <0 0 0 0 0>; + interrupts = <23 2 0 0>; + interrupt-map-mask = <0xf800 0 0 7>; + interrupt-map = < + /* IDSEL 0x0 */ + 0000 0 0 1 &mpic 43 1 0 0 + 0000 0 0 2 &mpic 0 1 0 0 + 0000 0 0 3 &mpic 4 1 0 0 + 0000 0 0 4 &mpic 8 1 0 0 + >; + }; +}; + +&rio { + compatible = "fsl,srio"; + interrupts = <16 2 1 11>; + #address-cells = <2>; + #size-cells = <2>; + ranges; + + port1 { + #address-cells = <2>; + #size-cells = <2>; + cell-index = <1>; + }; + + port2 { + #address-cells = <2>; + #size-cells = <2>; + cell-index = <2>; + }; +}; + +&dcsr { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,dcsr", "simple-bus"; + + dcsr-epu@0 { + compatible = "fsl,t4240-dcsr-epu", "fsl,dcsr-epu"; + interrupts = <52 2 0 0 + 84 2 0 0 + 85 2 0 0 + 94 2 0 0 + 95 2 0 0>; + reg = <0x0 0x1000>; + }; + dcsr-npc { + compatible = "fsl,t4240-dcsr-cnpc", "fsl,dcsr-cnpc"; + reg = <0x1000 0x1000 0x1002000 0x10000>; + }; + dcsr-nxc@2000 { + compatible = "fsl,dcsr-nxc"; + reg = <0x2000 0x1000>; + }; + dcsr-corenet { + compatible = "fsl,dcsr-corenet"; + reg = <0x8000 0x1000 0x1A000 0x1000>; + }; + dcsr-dpaa@9000 { + compatible = "fsl,t4240-dcsr-dpaa", "fsl,dcsr-dpaa"; + reg = <0x9000 0x1000>; + }; + dcsr-ocn@11000 { + compatible = "fsl,t4240-dcsr-ocn", "fsl,dcsr-ocn"; + reg = <0x11000 0x1000>; + }; + dcsr-ddr@12000 { + compatible = "fsl,dcsr-ddr"; + dev-handle = <&ddr1>; + reg = <0x12000 0x1000>; + }; + dcsr-ddr@13000 { + compatible = "fsl,dcsr-ddr"; + dev-handle = <&ddr2>; + reg = <0x13000 0x1000>; + }; + dcsr-ddr@14000 { + compatible = "fsl,dcsr-ddr"; + dev-handle = <&ddr3>; + reg = <0x14000 0x1000>; + }; + dcsr-nal@18000 { + compatible = "fsl,t4240-dcsr-nal", "fsl,dcsr-nal"; + reg = <0x18000 0x1000>; + }; + dcsr-rcpm@22000 { + compatible = "fsl,t4240-dcsr-rcpm", "fsl,dcsr-rcpm"; + reg = <0x22000 0x1000>; + }; + dcsr-snpc@30000 { + compatible = "fsl,t4240-dcsr-snpc", "fsl,dcsr-snpc"; + reg = <0x30000 0x1000 0x1022000 0x10000>; + }; + dcsr-snpc@31000 { + compatible = "fsl,t4240-dcsr-snpc", "fsl,dcsr-snpc"; + reg = <0x31000 0x1000 0x1042000 0x10000>; + }; + dcsr-snpc@32000 { + compatible = "fsl,t4240-dcsr-snpc", "fsl,dcsr-snpc"; + reg = <0x32000 0x1000 0x1062000 0x10000>; + }; + dcsr-cpu-sb-proxy@100000 { + compatible = "fsl,dcsr-e6500-sb-proxy", "fsl,dcsr-cpu-sb-proxy"; + cpu-handle = <&cpu0>; + reg = <0x100000 0x1000 0x101000 0x1000>; + }; + dcsr-cpu-sb-proxy@108000 { + compatible = "fsl,dcsr-e6500-sb-proxy", "fsl,dcsr-cpu-sb-proxy"; + cpu-handle = <&cpu1>; + reg = <0x108000 0x1000 0x109000 0x1000>; + }; + dcsr-cpu-sb-proxy@110000 { + compatible = "fsl,dcsr-e6500-sb-proxy", "fsl,dcsr-cpu-sb-proxy"; + cpu-handle = <&cpu2>; + reg = <0x110000 0x1000 0x111000 0x1000>; + }; + dcsr-cpu-sb-proxy@118000 { + compatible = "fsl,dcsr-e6500-sb-proxy", "fsl,dcsr-cpu-sb-proxy"; + cpu-handle = <&cpu3>; + reg = <0x118000 0x1000 0x119000 0x1000>; + }; + dcsr-cpu-sb-proxy@120000 { + compatible = "fsl,dcsr-e6500-sb-proxy", "fsl,dcsr-cpu-sb-proxy"; + cpu-handle = <&cpu4>; + reg = <0x120000 0x1000 0x121000 0x1000>; + }; + dcsr-cpu-sb-proxy@128000 { + compatible = "fsl,dcsr-e6500-sb-proxy", "fsl,dcsr-cpu-sb-proxy"; + cpu-handle = <&cpu5>; + reg = <0x128000 0x1000 0x129000 0x1000>; + }; + dcsr-cpu-sb-proxy@130000 { + compatible = "fsl,dcsr-e6500-sb-proxy", "fsl,dcsr-cpu-sb-proxy"; + cpu-handle = <&cpu6>; + reg = <0x130000 0x1000 0x131000 0x1000>; + }; + dcsr-cpu-sb-proxy@138000 { + compatible = "fsl,dcsr-e6500-sb-proxy", "fsl,dcsr-cpu-sb-proxy"; + cpu-handle = <&cpu7>; + reg = <0x138000 0x1000 0x139000 0x1000>; + }; + dcsr-cpu-sb-proxy@140000 { + compatible = "fsl,dcsr-e6500-sb-proxy", "fsl,dcsr-cpu-sb-proxy"; + cpu-handle = <&cpu8>; + reg = <0x140000 0x1000 0x141000 0x1000>; + }; + dcsr-cpu-sb-proxy@148000 { + compatible = "fsl,dcsr-e6500-sb-proxy", "fsl,dcsr-cpu-sb-proxy"; + cpu-handle = <&cpu9>; + reg = <0x148000 0x1000 0x149000 0x1000>; + }; + dcsr-cpu-sb-proxy@150000 { + compatible = "fsl,dcsr-e6500-sb-proxy", "fsl,dcsr-cpu-sb-proxy"; + cpu-handle = <&cpu10>; + reg = <0x150000 0x1000 0x151000 0x1000>; + }; + dcsr-cpu-sb-proxy@158000 { + compatible = "fsl,dcsr-e6500-sb-proxy", "fsl,dcsr-cpu-sb-proxy"; + cpu-handle = <&cpu11>; + reg = <0x158000 0x1000 0x159000 0x1000>; + }; +}; + +&bportals { + #address-cells = <0x1>; + #size-cells = <0x1>; + compatible = "simple-bus"; + + bman-portal@0 { + compatible = "fsl,bman-portal"; + reg = <0x0 0x4000>, <0x1000000 0x1000>; + interrupts = <105 2 0 0>; + }; + bman-portal@4000 { + compatible = "fsl,bman-portal"; + reg = <0x4000 0x4000>, <0x1001000 0x1000>; + interrupts = <107 2 0 0>; + }; + bman-portal@8000 { + compatible = "fsl,bman-portal"; + reg = <0x8000 0x4000>, <0x1002000 0x1000>; + interrupts = <109 2 0 0>; + }; + bman-portal@c000 { + compatible = "fsl,bman-portal"; + reg = <0xc000 0x4000>, <0x1003000 0x1000>; + interrupts = <111 2 0 0>; + }; + bman-portal@10000 { + compatible = "fsl,bman-portal"; + reg = <0x10000 0x4000>, <0x1004000 0x1000>; + interrupts = <113 2 0 0>; + }; + bman-portal@14000 { + compatible = "fsl,bman-portal"; + reg = <0x14000 0x4000>, <0x1005000 0x1000>; + interrupts = <115 2 0 0>; + }; + bman-portal@18000 { + compatible = "fsl,bman-portal"; + reg = <0x18000 0x4000>, <0x1006000 0x1000>; + interrupts = <117 2 0 0>; + }; + bman-portal@1c000 { + compatible = "fsl,bman-portal"; + reg = <0x1c000 0x4000>, <0x1007000 0x1000>; + interrupts = <119 2 0 0>; + }; + bman-portal@20000 { + compatible = "fsl,bman-portal"; + reg = <0x20000 0x4000>, <0x1008000 0x1000>; + interrupts = <121 2 0 0>; + }; + bman-portal@24000 { + compatible = "fsl,bman-portal"; + reg = <0x24000 0x4000>, <0x1009000 0x1000>; + interrupts = <123 2 0 0>; + }; + bman-portal@28000 { + compatible = "fsl,bman-portal"; + reg = <0x28000 0x4000>, <0x100a000 0x1000>; + interrupts = <125 2 0 0>; + }; + bman-portal@2c000 { + compatible = "fsl,bman-portal"; + reg = <0x2c000 0x4000>, <0x100b000 0x1000>; + interrupts = <127 2 0 0>; + }; + bman-portal@30000 { + compatible = "fsl,bman-portal"; + reg = <0x30000 0x4000>, <0x100c000 0x1000>; + interrupts = <129 2 0 0>; + }; + bman-portal@34000 { + compatible = "fsl,bman-portal"; + reg = <0x34000 0x4000>, <0x100d000 0x1000>; + interrupts = <131 2 0 0>; + }; + bman-portal@38000 { + compatible = "fsl,bman-portal"; + reg = <0x38000 0x4000>, <0x100e000 0x1000>; + interrupts = <133 2 0 0>; + }; + bman-portal@3c000 { + compatible = "fsl,bman-portal"; + reg = <0x3c000 0x4000>, <0x100f000 0x1000>; + interrupts = <135 2 0 0>; + }; + bman-portal@40000 { + compatible = "fsl,bman-portal"; + reg = <0x40000 0x4000>, <0x1010000 0x1000>; + interrupts = <137 2 0 0>; + }; + bman-portal@44000 { + compatible = "fsl,bman-portal"; + reg = <0x44000 0x4000>, <0x1011000 0x1000>; + interrupts = <139 2 0 0>; + }; + bman-portal@48000 { + compatible = "fsl,bman-portal"; + reg = <0x48000 0x4000>, <0x1012000 0x1000>; + interrupts = <141 2 0 0>; + }; + bman-portal@4c000 { + compatible = "fsl,bman-portal"; + reg = <0x4c000 0x4000>, <0x1013000 0x1000>; + interrupts = <143 2 0 0>; + }; + bman-portal@50000 { + compatible = "fsl,bman-portal"; + reg = <0x50000 0x4000>, <0x1014000 0x1000>; + interrupts = <145 2 0 0>; + }; + bman-portal@54000 { + compatible = "fsl,bman-portal"; + reg = <0x54000 0x4000>, <0x1015000 0x1000>; + interrupts = <147 2 0 0>; + }; + bman-portal@58000 { + compatible = "fsl,bman-portal"; + reg = <0x58000 0x4000>, <0x1016000 0x1000>; + interrupts = <149 2 0 0>; + }; + bman-portal@5c000 { + compatible = "fsl,bman-portal"; + reg = <0x5c000 0x4000>, <0x1017000 0x1000>; + interrupts = <151 2 0 0>; + }; + bman-portal@60000 { + compatible = "fsl,bman-portal"; + reg = <0x60000 0x4000>, <0x1018000 0x1000>; + interrupts = <153 2 0 0>; + }; + bman-portal@64000 { + compatible = "fsl,bman-portal"; + reg = <0x64000 0x4000>, <0x1019000 0x1000>; + interrupts = <155 2 0 0>; + }; + bman-portal@68000 { + compatible = "fsl,bman-portal"; + reg = <0x68000 0x4000>, <0x101a000 0x1000>; + interrupts = <157 2 0 0>; + }; + bman-portal@6c000 { + compatible = "fsl,bman-portal"; + reg = <0x6c000 0x4000>, <0x101b000 0x1000>; + interrupts = <159 2 0 0>; + }; + bman-portal@70000 { + compatible = "fsl,bman-portal"; + reg = <0x70000 0x4000>, <0x101c000 0x1000>; + interrupts = <161 2 0 0>; + }; + bman-portal@74000 { + compatible = "fsl,bman-portal"; + reg = <0x74000 0x4000>, <0x101d000 0x1000>; + interrupts = <163 2 0 0>; + }; + bman-portal@78000 { + compatible = "fsl,bman-portal"; + reg = <0x78000 0x4000>, <0x101e000 0x1000>; + interrupts = <165 2 0 0>; + }; + bman-portal@7c000 { + compatible = "fsl,bman-portal"; + reg = <0x7c000 0x4000>, <0x101f000 0x1000>; + interrupts = <167 2 0 0>; + }; + bman-portal@80000 { + compatible = "fsl,bman-portal"; + reg = <0x80000 0x4000>, <0x1020000 0x1000>; + interrupts = <169 2 0 0>; + }; + bman-portal@84000 { + compatible = "fsl,bman-portal"; + reg = <0x84000 0x4000>, <0x1021000 0x1000>; + interrupts = <171 2 0 0>; + }; + bman-portal@88000 { + compatible = "fsl,bman-portal"; + reg = <0x88000 0x4000>, <0x1022000 0x1000>; + interrupts = <173 2 0 0>; + }; + bman-portal@8c000 { + compatible = "fsl,bman-portal"; + reg = <0x8c000 0x4000>, <0x1023000 0x1000>; + interrupts = <175 2 0 0>; + }; + bman-portal@90000 { + compatible = "fsl,bman-portal"; + reg = <0x90000 0x4000>, <0x1024000 0x1000>; + interrupts = <385 2 0 0>; + }; + bman-portal@94000 { + compatible = "fsl,bman-portal"; + reg = <0x94000 0x4000>, <0x1025000 0x1000>; + interrupts = <387 2 0 0>; + }; + bman-portal@98000 { + compatible = "fsl,bman-portal"; + reg = <0x98000 0x4000>, <0x1026000 0x1000>; + interrupts = <389 2 0 0>; + }; + bman-portal@9c000 { + compatible = "fsl,bman-portal"; + reg = <0x9c000 0x4000>, <0x1027000 0x1000>; + interrupts = <391 2 0 0>; + }; + bman-portal@a0000 { + compatible = "fsl,bman-portal"; + reg = <0xa0000 0x4000>, <0x1028000 0x1000>; + interrupts = <393 2 0 0>; + }; + bman-portal@a4000 { + compatible = "fsl,bman-portal"; + reg = <0xa4000 0x4000>, <0x1029000 0x1000>; + interrupts = <395 2 0 0>; + }; + bman-portal@a8000 { + compatible = "fsl,bman-portal"; + reg = <0xa8000 0x4000>, <0x102a000 0x1000>; + interrupts = <397 2 0 0>; + }; + bman-portal@ac000 { + compatible = "fsl,bman-portal"; + reg = <0xac000 0x4000>, <0x102b000 0x1000>; + interrupts = <399 2 0 0>; + }; + bman-portal@b0000 { + compatible = "fsl,bman-portal"; + reg = <0xb0000 0x4000>, <0x102c000 0x1000>; + interrupts = <401 2 0 0>; + }; + bman-portal@b4000 { + compatible = "fsl,bman-portal"; + reg = <0xb4000 0x4000>, <0x102d000 0x1000>; + interrupts = <403 2 0 0>; + }; + bman-portal@b8000 { + compatible = "fsl,bman-portal"; + reg = <0xb8000 0x4000>, <0x102e000 0x1000>; + interrupts = <405 2 0 0>; + }; + bman-portal@bc000 { + compatible = "fsl,bman-portal"; + reg = <0xbc000 0x4000>, <0x102f000 0x1000>; + interrupts = <407 2 0 0>; + }; + bman-portal@c0000 { + compatible = "fsl,bman-portal"; + reg = <0xc0000 0x4000>, <0x1030000 0x1000>; + interrupts = <409 2 0 0>; + }; + bman-portal@c4000 { + compatible = "fsl,bman-portal"; + reg = <0xc4000 0x4000>, <0x1031000 0x1000>; + interrupts = <411 2 0 0>; + }; +}; + +&soc { + #address-cells = <1>; + #size-cells = <1>; + device_type = "soc"; + compatible = "simple-bus"; + + soc-sram-error { + compatible = "fsl,soc-sram-error"; + interrupts = <16 2 1 29>; + }; + + corenet-law@0 { + compatible = "fsl,corenet-law"; + reg = <0x0 0x1000>; + fsl,num-laws = <32>; + }; + + ddr1: memory-controller@8000 { + compatible = "fsl,qoriq-memory-controller-v4.7", + "fsl,qoriq-memory-controller"; + reg = <0x8000 0x1000>; + interrupts = <16 2 1 23>; + }; + + ddr2: memory-controller@9000 { + compatible = "fsl,qoriq-memory-controller-v4.7", + "fsl,qoriq-memory-controller"; + reg = <0x9000 0x1000>; + interrupts = <16 2 1 22>; + }; + + ddr3: memory-controller@a000 { + compatible = "fsl,qoriq-memory-controller-v4.7", + "fsl,qoriq-memory-controller"; + reg = <0xa000 0x1000>; + interrupts = <16 2 1 21>; + }; + + cpc: l3-cache-controller@10000 { + compatible = "fsl,t4240-l3-cache-controller", "cache"; + reg = <0x10000 0x1000 + 0x11000 0x1000 + 0x12000 0x1000>; + interrupts = <16 2 1 27 + 16 2 1 26 + 16 2 1 25>; + }; + + corenet-cf@18000 { + compatible = "fsl,corenet2-cf", "fsl,corenet-cf"; + reg = <0x18000 0x1000>; + interrupts = <16 2 1 31>; + fsl,ccf-num-csdids = <32>; + fsl,ccf-num-snoopids = <32>; + }; + + iommu@20000 { + compatible = "fsl,pamu-v1.0", "fsl,pamu"; + reg = <0x20000 0x6000>; + fsl,portid-mapping = <0x8000>; + interrupts = < + 24 2 0 0 + 16 2 1 30>; + }; + +/include/ "qoriq-mpic4.3.dtsi" + + guts: global-utilities@e0000 { + compatible = "fsl,t4240-device-config", "fsl,qoriq-device-config-2.0"; + reg = <0xe0000 0xe00>; + fsl,has-rstcr; + fsl,liodn-bits = <12>; + }; + +/include/ "qoriq-clockgen2.dtsi" + global-utilities@e1000 { + compatible = "fsl,t4240-clockgen", "fsl,qoriq-clockgen-2.0"; + + pll2: pll2@840 { + #clock-cells = <1>; + reg = <0x840 0x4>; + compatible = "fsl,qoriq-core-pll-2.0"; + clocks = <&sysclk>; + clock-output-names = "pll2", "pll2-div2", "pll2-div4"; + }; + + pll3: pll3@860 { + #clock-cells = <1>; + reg = <0x860 0x4>; + compatible = "fsl,qoriq-core-pll-2.0"; + clocks = <&sysclk>; + clock-output-names = "pll3", "pll3-div2", "pll3-div4"; + }; + + pll4: pll4@880 { + #clock-cells = <1>; + reg = <0x880 0x4>; + compatible = "fsl,qoriq-core-pll-2.0"; + clocks = <&sysclk>; + clock-output-names = "pll4", "pll4-div2", "pll4-div4"; + }; + + mux0: mux0@0 { + #clock-cells = <0>; + reg = <0x0 0x4>; + compatible = "fsl,qoriq-core-mux-2.0"; + clocks = <&pll0 0>, <&pll0 1>, <&pll0 2>, + <&pll1 0>, <&pll1 1>, <&pll1 2>, + <&pll2 0>, <&pll2 1>, <&pll2 2>; + clock-names = "pll0", "pll0-div2", "pll0-div4", + "pll1", "pll1-div2", "pll1-div4", + "pll2", "pll2-div2", "pll2-div4"; + clock-output-names = "cmux0"; + }; + + mux1: mux1@20 { + #clock-cells = <0>; + reg = <0x20 0x4>; + compatible = "fsl,qoriq-core-mux-2.0"; + clocks = <&pll0 0>, <&pll0 1>, <&pll0 2>, + <&pll1 0>, <&pll1 1>, <&pll1 2>, + <&pll2 0>, <&pll2 1>, <&pll2 2>; + clock-names = "pll0", "pll0-div2", "pll0-div4", + "pll1", "pll1-div2", "pll1-div4", + "pll2", "pll2-div2", "pll2-div4"; + clock-output-names = "cmux1"; + }; + + mux2: mux2@40 { + #clock-cells = <0>; + reg = <0x40 0x4>; + compatible = "fsl,qoriq-core-mux-2.0"; + clocks = <&pll3 0>, <&pll3 1>, <&pll3 2>, + <&pll4 0>, <&pll4 1>, <&pll4 2>; + clock-names = "pll3", "pll3-div2", "pll3-div4", + "pll4", "pll4-div2", "pll4-div4"; + clock-output-names = "cmux2"; + }; + }; + + rcpm: global-utilities@e2000 { + compatible = "fsl,t4240-rcpm", "fsl,qoriq-rcpm-2.0"; + reg = <0xe2000 0x1000>; + }; + + sfp: sfp@e8000 { + compatible = "fsl,t4240-sfp"; + reg = <0xe8000 0x1000>; + }; + + serdes: serdes@ea000 { + compatible = "fsl,t4240-serdes"; + reg = <0xea000 0x4000>; + }; + +/include/ "elo3-dma-0.dtsi" +/include/ "elo3-dma-1.dtsi" +/include/ "elo3-dma-2.dtsi" + +/include/ "qoriq-espi-0.dtsi" + spi@110000 { + fsl,espi-num-chipselects = <4>; + }; + +/include/ "qoriq-esdhc-0.dtsi" + sdhc@114000 { + compatible = "fsl,t4240-esdhc", "fsl,esdhc"; + sdhci,auto-cmd12; + }; +/include/ "qoriq-i2c-0.dtsi" +/include/ "qoriq-i2c-1.dtsi" +/include/ "qoriq-duart-0.dtsi" +/include/ "qoriq-duart-1.dtsi" +/include/ "qoriq-gpio-0.dtsi" +/include/ "qoriq-gpio-1.dtsi" +/include/ "qoriq-gpio-2.dtsi" +/include/ "qoriq-gpio-3.dtsi" +/include/ "qoriq-usb2-mph-0.dtsi" + usb0: usb@210000 { + compatible = "fsl-usb2-mph-v2.5", "fsl-usb2-mph"; + phy_type = "utmi"; + port0; + }; +/include/ "qoriq-usb2-dr-0.dtsi" + usb1: usb@211000 { + compatible = "fsl-usb2-dr-v2.5", "fsl-usb2-dr"; + dr_mode = "host"; + phy_type = "utmi"; + }; +/include/ "qoriq-sata2-0.dtsi" +/include/ "qoriq-sata2-1.dtsi" +/include/ "qoriq-sec5.0-0.dtsi" +/include/ "qoriq-bman1.dtsi" + + L2_1: l2-cache-controller@c20000 { + compatible = "fsl,t4240-l2-cache-controller"; + reg = <0xc20000 0x40000>; + next-level-cache = <&cpc>; + }; + L2_2: l2-cache-controller@c60000 { + compatible = "fsl,t4240-l2-cache-controller"; + reg = <0xc60000 0x40000>; + next-level-cache = <&cpc>; + }; + L2_3: l2-cache-controller@ca0000 { + compatible = "fsl,t4240-l2-cache-controller"; + reg = <0xca0000 0x40000>; + next-level-cache = <&cpc>; + }; +}; diff --git a/arch/powerpc/boot/dts/fsl/t4240si-pre.dtsi b/arch/powerpc/boot/dts/fsl/t4240si-pre.dtsi new file mode 100644 index 000000000..261a3abb1 --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/t4240si-pre.dtsi @@ -0,0 +1,153 @@ +/* + * T4240 Silicon/SoC Device Tree Source (pre include) + * + * Copyright 2012 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +/dts-v1/; + +/include/ "e6500_power_isa.dtsi" + +/ { + compatible = "fsl,T4240"; + #address-cells = <2>; + #size-cells = <2>; + interrupt-parent = <&mpic>; + + aliases { + ccsr = &soc; + dcsr = &dcsr; + + serial0 = &serial0; + serial1 = &serial1; + serial2 = &serial2; + serial3 = &serial3; + crypto = &crypto; + pci0 = &pci0; + pci1 = &pci1; + pci2 = &pci2; + pci3 = &pci3; + dma0 = &dma0; + dma1 = &dma1; + dma2 = &dma2; + sdhc = &sdhc; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu0: PowerPC,e6500@0 { + device_type = "cpu"; + reg = <0 1>; + clocks = <&mux0>; + next-level-cache = <&L2_1>; + fsl,portid-mapping = <0x80000000>; + }; + cpu1: PowerPC,e6500@2 { + device_type = "cpu"; + reg = <2 3>; + clocks = <&mux0>; + next-level-cache = <&L2_1>; + fsl,portid-mapping = <0x80000000>; + }; + cpu2: PowerPC,e6500@4 { + device_type = "cpu"; + reg = <4 5>; + clocks = <&mux0>; + next-level-cache = <&L2_1>; + fsl,portid-mapping = <0x80000000>; + }; + cpu3: PowerPC,e6500@6 { + device_type = "cpu"; + reg = <6 7>; + clocks = <&mux0>; + next-level-cache = <&L2_1>; + fsl,portid-mapping = <0x80000000>; + }; + cpu4: PowerPC,e6500@8 { + device_type = "cpu"; + reg = <8 9>; + clocks = <&mux1>; + next-level-cache = <&L2_2>; + fsl,portid-mapping = <0x40000000>; + }; + cpu5: PowerPC,e6500@10 { + device_type = "cpu"; + reg = <10 11>; + clocks = <&mux1>; + next-level-cache = <&L2_2>; + fsl,portid-mapping = <0x40000000>; + }; + cpu6: PowerPC,e6500@12 { + device_type = "cpu"; + reg = <12 13>; + clocks = <&mux1>; + next-level-cache = <&L2_2>; + fsl,portid-mapping = <0x40000000>; + }; + cpu7: PowerPC,e6500@14 { + device_type = "cpu"; + reg = <14 15>; + clocks = <&mux1>; + next-level-cache = <&L2_2>; + fsl,portid-mapping = <0x40000000>; + }; + cpu8: PowerPC,e6500@16 { + device_type = "cpu"; + reg = <16 17>; + clocks = <&mux2>; + next-level-cache = <&L2_3>; + fsl,portid-mapping = <0x20000000>; + }; + cpu9: PowerPC,e6500@18 { + device_type = "cpu"; + reg = <18 19>; + clocks = <&mux2>; + next-level-cache = <&L2_3>; + fsl,portid-mapping = <0x20000000>; + }; + cpu10: PowerPC,e6500@20 { + device_type = "cpu"; + reg = <20 21>; + clocks = <&mux2>; + next-level-cache = <&L2_3>; + fsl,portid-mapping = <0x20000000>; + }; + cpu11: PowerPC,e6500@22 { + device_type = "cpu"; + reg = <22 23>; + clocks = <&mux2>; + next-level-cache = <&L2_3>; + fsl,portid-mapping = <0x20000000>; + }; + }; +}; diff --git a/arch/powerpc/boot/dts/gamecube.dts b/arch/powerpc/boot/dts/gamecube.dts new file mode 100644 index 000000000..ef3be0e58 --- /dev/null +++ b/arch/powerpc/boot/dts/gamecube.dts @@ -0,0 +1,114 @@ +/* + * arch/powerpc/boot/dts/gamecube.dts + * + * Nintendo GameCube platform device tree source + * Copyright (C) 2007-2009 The GameCube Linux Team + * Copyright (C) 2007,2008,2009 Albert Herranz + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * + */ + +/dts-v1/; + +/ { + model = "nintendo,gamecube"; + compatible = "nintendo,gamecube"; + #address-cells = <1>; + #size-cells = <1>; + + chosen { + bootargs = "root=/dev/gcnsda2 rootwait udbg-immortal"; + }; + + memory { + device_type = "memory"; + reg = <0x00000000 0x01800000>; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + PowerPC,gekko@0 { + device_type = "cpu"; + reg = <0>; + clock-frequency = <486000000>; /* 486MHz */ + bus-frequency = <162000000>; /* 162MHz core-to-bus 3x */ + timebase-frequency = <40500000>; /* 162MHz / 4 */ + i-cache-line-size = <32>; + d-cache-line-size = <32>; + i-cache-size = <32768>; + d-cache-size = <32768>; + }; + }; + + /* devices contained int the flipper chipset */ + flipper { + #address-cells = <1>; + #size-cells = <1>; + compatible = "nintendo,flipper"; + ranges = <0x0c000000 0x0c000000 0x00010000>; + interrupt-parent = <&PIC>; + + video@0c002000 { + compatible = "nintendo,flipper-vi"; + reg = <0x0c002000 0x100>; + interrupts = <8>; + }; + + processor-interface@0c003000 { + compatible = "nintendo,flipper-pi"; + reg = <0x0c003000 0x100>; + + PIC: pic { + #interrupt-cells = <1>; + compatible = "nintendo,flipper-pic"; + interrupt-controller; + }; + }; + + dsp@0c005000 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "nintendo,flipper-dsp"; + reg = <0x0c005000 0x200>; + interrupts = <6>; + + memory@0 { + compatible = "nintendo,flipper-aram"; + reg = <0 0x1000000>; /* 16MB */ + }; + }; + + disk@0c006000 { + compatible = "nintendo,flipper-di"; + reg = <0x0c006000 0x40>; + interrupts = <2>; + }; + + audio@0c006c00 { + compatible = "nintendo,flipper-ai"; + reg = <0x0c006c00 0x20>; + interrupts = <6>; + }; + + gamepad-controller@0c006400 { + compatible = "nintendo,flipper-si"; + reg = <0x0c006400 0x100>; + interrupts = <3>; + }; + + /* External Interface bus */ + exi@0c006800 { + compatible = "nintendo,flipper-exi"; + reg = <0x0c006800 0x40>; + virtual-reg = <0x0c006800>; + interrupts = <4>; + }; + }; +}; + diff --git a/arch/powerpc/boot/dts/ge_imp3a.dts b/arch/powerpc/boot/dts/ge_imp3a.dts new file mode 100644 index 000000000..fefae416a --- /dev/null +++ b/arch/powerpc/boot/dts/ge_imp3a.dts @@ -0,0 +1,255 @@ +/* + * GE IMP3A Device Tree Source + * + * Copyright 2010-2011 GE Intelligent Platforms Embedded Systems, Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * Based on: P2020 DS Device Tree Source + * Copyright 2009 Freescale Semiconductor Inc. + */ + +/include/ "fsl/p2020si-pre.dtsi" + +/ { + model = "GE_IMP3A"; + compatible = "ge,imp3a"; + + memory { + device_type = "memory"; + }; + + lbc: localbus@fef05000 { + reg = <0 0xfef05000 0 0x1000>; + + ranges = <0x0 0x0 0x0 0xff000000 0x01000000 + 0x1 0x0 0x0 0xe0000000 0x08000000 + 0x2 0x0 0x0 0xe8000000 0x08000000 + 0x3 0x0 0x0 0xfc100000 0x00020000 + 0x4 0x0 0x0 0xfc000000 0x00008000 + 0x5 0x0 0x0 0xfc008000 0x00008000 + 0x6 0x0 0x0 0xfee00000 0x00040000 + 0x7 0x0 0x0 0xfee80000 0x00040000>; + + /* nor@0,0 is a mirror of part of the memory in nor@1,0 + nor@0,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "ge,imp3a-firmware-mirror", "cfi-flash"; + reg = <0x0 0x0 0x1000000>; + bank-width = <2>; + device-width = <1>; + + partition@0 { + label = "firmware"; + reg = <0x0 0x1000000>; + read-only; + }; + }; + */ + + nor@1,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "ge,imp3a-paged-flash", "cfi-flash"; + reg = <0x1 0x0 0x8000000>; + bank-width = <2>; + device-width = <1>; + + partition@0 { + label = "user"; + reg = <0x0 0x7800000>; + }; + + partition@7800000 { + label = "firmware"; + reg = <0x7800000 0x800000>; + read-only; + }; + }; + + nvram@3,0 { + device_type = "nvram"; + compatible = "simtek,stk14ca8"; + reg = <0x3 0x0 0x20000>; + }; + + fpga@4,0 { + compatible = "ge,imp3a-fpga-regs"; + reg = <0x4 0x0 0x20>; + }; + + gef_pic: pic@4,20 { + #interrupt-cells = <1>; + interrupt-controller; + device_type = "interrupt-controller"; + compatible = "ge,imp3a-fpga-pic", "gef,fpga-pic-1.00"; + reg = <0x4 0x20 0x20>; + interrupts = <6 7 0 0>; + }; + + gef_gpio: gpio@4,400 { + #gpio-cells = <2>; + compatible = "ge,imp3a-gpio"; + reg = <0x4 0x400 0x24>; + gpio-controller; + }; + + wdt@4,800 { + compatible = "ge,imp3a-fpga-wdt", "gef,fpga-wdt-1.00", + "gef,fpga-wdt"; + reg = <0x4 0x800 0x8>; + interrupts = <10 4>; + interrupt-parent = <&gef_pic>; + }; + + /* Second watchdog available, driver currently supports one. + wdt@4,808 { + compatible = "gef,imp3a-fpga-wdt", "gef,fpga-wdt-1.00", + "gef,fpga-wdt"; + reg = <0x4 0x808 0x8>; + interrupts = <9 4>; + interrupt-parent = <&gef_pic>; + }; + */ + + nand@6,0 { + compatible = "fsl,elbc-fcm-nand"; + reg = <0x6 0x0 0x40000>; + }; + + nand@7,0 { + compatible = "fsl,elbc-fcm-nand"; + reg = <0x7 0x0 0x40000>; + }; + }; + + soc: soc@fef00000 { + ranges = <0x0 0 0xfef00000 0x100000>; + + i2c@3000 { + hwmon@48 { + compatible = "national,lm92"; + reg = <0x48>; + }; + + hwmon@4c { + compatible = "adi,adt7461"; + reg = <0x4c>; + }; + + rtc@51 { + compatible = "epson,rx8581"; + reg = <0x51>; + }; + + eti@6b { + compatible = "dallas,ds1682"; + reg = <0x6b>; + }; + }; + + usb@22000 { + phy_type = "ulpi"; + dr_mode = "host"; + }; + + mdio@24520 { + phy0: ethernet-phy@0 { + interrupt-parent = <&gef_pic>; + interrupts = <0xc 0x4>; + reg = <0x1>; + }; + phy1: ethernet-phy@1 { + interrupt-parent = <&gef_pic>; + interrupts = <0xb 0x4>; + reg = <0x2>; + }; + tbi0: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + + mdio@25520 { + tbi1: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + + mdio@26520 { + status = "disabled"; + }; + + enet0: ethernet@24000 { + tbi-handle = <&tbi0>; + phy-handle = <&phy0>; + phy-connection-type = "gmii"; + }; + + enet1: ethernet@25000 { + tbi-handle = <&tbi1>; + phy-handle = <&phy1>; + phy-connection-type = "gmii"; + }; + + enet2: ethernet@26000 { + status = "disabled"; + }; + }; + + pci0: pcie@fef08000 { + ranges = <0x2000000 0x0 0xc0000000 0 0xc0000000 0x0 0x20000000 + 0x1000000 0x0 0x00000000 0 0xfe020000 0x0 0x10000>; + reg = <0 0xfef08000 0 0x1000>; + + pcie@0 { + ranges = <0x2000000 0x0 0xc0000000 + 0x2000000 0x0 0xc0000000 + 0x0 0x20000000 + + 0x1000000 0x0 0x0 + 0x1000000 0x0 0x0 + 0x0 0x10000>; + }; + }; + + pci1: pcie@fef09000 { + reg = <0 0xfef09000 0 0x1000>; + ranges = <0x2000000 0x0 0xa0000000 0 0xa0000000 0x0 0x20000000 + 0x1000000 0x0 0x00000000 0 0xfe010000 0x0 0x10000>; + + pcie@0 { + ranges = <0x2000000 0x0 0xa0000000 + 0x2000000 0x0 0xa0000000 + 0x0 0x20000000 + + 0x1000000 0x0 0x0 + 0x1000000 0x0 0x0 + 0x0 0x10000>; + }; + + }; + + pci2: pcie@fef0a000 { + reg = <0 0xfef0a000 0 0x1000>; + ranges = <0x2000000 0x0 0x80000000 0 0x80000000 0x0 0x20000000 + 0x1000000 0x0 0x00000000 0 0xfe000000 0x0 0x10000>; + + pcie@0 { + ranges = <0x2000000 0x0 0x80000000 + 0x2000000 0x0 0x80000000 + 0x0 0x20000000 + + 0x1000000 0x0 0x0 + 0x1000000 0x0 0x0 + 0x0 0x10000>; + }; + }; +}; + +/include/ "fsl/p2020si-post.dtsi" diff --git a/arch/powerpc/boot/dts/gef_ppc9a.dts b/arch/powerpc/boot/dts/gef_ppc9a.dts new file mode 100644 index 000000000..83eb0fda2 --- /dev/null +++ b/arch/powerpc/boot/dts/gef_ppc9a.dts @@ -0,0 +1,425 @@ +/* + * GE PPC9A Device Tree Source + * + * Copyright 2008 GE Intelligent Platforms Embedded Systems, Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * Based on: SBS CM6 Device Tree Source + * Copyright 2007 SBS Technologies GmbH & Co. KG + * And: mpc8641_hpcn.dts (MPC8641 HPCN Device Tree Source) + * Copyright 2006 Freescale Semiconductor Inc. + */ + +/* + * Compiled with dtc -I dts -O dtb -o gef_ppc9a.dtb gef_ppc9a.dts + */ + +/dts-v1/; + +/ { + model = "GEF_PPC9A"; + compatible = "gef,ppc9a"; + #address-cells = <1>; + #size-cells = <1>; + + aliases { + ethernet0 = &enet0; + ethernet1 = &enet1; + serial0 = &serial0; + serial1 = &serial1; + pci0 = &pci0; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + PowerPC,8641@0 { + device_type = "cpu"; + reg = <0>; + d-cache-line-size = <32>; // 32 bytes + i-cache-line-size = <32>; // 32 bytes + d-cache-size = <32768>; // L1, 32K + i-cache-size = <32768>; // L1, 32K + timebase-frequency = <0>; // From uboot + bus-frequency = <0>; // From uboot + clock-frequency = <0>; // From uboot + }; + PowerPC,8641@1 { + device_type = "cpu"; + reg = <1>; + d-cache-line-size = <32>; // 32 bytes + i-cache-line-size = <32>; // 32 bytes + d-cache-size = <32768>; // L1, 32K + i-cache-size = <32768>; // L1, 32K + timebase-frequency = <0>; // From uboot + bus-frequency = <0>; // From uboot + clock-frequency = <0>; // From uboot + }; + }; + + memory { + device_type = "memory"; + reg = <0x0 0x40000000>; // set by uboot + }; + + localbus@fef05000 { + #address-cells = <2>; + #size-cells = <1>; + compatible = "fsl,mpc8641-localbus", "simple-bus"; + reg = <0xfef05000 0x1000>; + interrupts = <19 2>; + interrupt-parent = <&mpic>; + + ranges = <0 0 0xff000000 0x01000000 // 16MB Boot flash + 1 0 0xe8000000 0x08000000 // Paged Flash 0 + 2 0 0xe0000000 0x08000000 // Paged Flash 1 + 3 0 0xfc100000 0x00020000 // NVRAM + 4 0 0xfc000000 0x00008000 // FPGA + 5 0 0xfc008000 0x00008000 // AFIX FPGA + 6 0 0xfd000000 0x00800000 // IO FPGA (8-bit) + 7 0 0xfd800000 0x00800000>; // IO FPGA (32-bit) + + /* flash@0,0 is a mirror of part of the memory in flash@1,0 + flash@0,0 { + compatible = "gef,ppc9a-firmware-mirror", "cfi-flash"; + reg = <0x0 0x0 0x1000000>; + bank-width = <4>; + device-width = <2>; + #address-cells = <1>; + #size-cells = <1>; + partition@0 { + label = "firmware"; + reg = <0x0 0x1000000>; + read-only; + }; + }; + */ + + flash@1,0 { + compatible = "gef,ppc9a-paged-flash", "cfi-flash"; + reg = <0x1 0x0 0x8000000>; + bank-width = <4>; + device-width = <2>; + #address-cells = <1>; + #size-cells = <1>; + partition@0 { + label = "user"; + reg = <0x0 0x7800000>; + }; + partition@7800000 { + label = "firmware"; + reg = <0x7800000 0x800000>; + read-only; + }; + }; + + nvram@3,0 { + device_type = "nvram"; + compatible = "simtek,stk14ca8"; + reg = <0x3 0x0 0x20000>; + }; + + fpga@4,0 { + compatible = "gef,ppc9a-fpga-regs"; + reg = <0x4 0x0 0x40>; + }; + + wdt@4,2000 { + compatible = "gef,ppc9a-fpga-wdt", "gef,fpga-wdt-1.00", + "gef,fpga-wdt"; + reg = <0x4 0x2000 0x8>; + interrupts = <0x1a 0x4>; + interrupt-parent = <&gef_pic>; + }; + /* Second watchdog available, driver currently supports one. + wdt@4,2010 { + compatible = "gef,ppc9a-fpga-wdt", "gef,fpga-wdt-1.00", + "gef,fpga-wdt"; + reg = <0x4 0x2010 0x8>; + interrupts = <0x1b 0x4>; + interrupt-parent = <&gef_pic>; + }; + */ + gef_pic: pic@4,4000 { + #interrupt-cells = <1>; + interrupt-controller; + compatible = "gef,ppc9a-fpga-pic", "gef,fpga-pic-1.00"; + reg = <0x4 0x4000 0x20>; + interrupts = <0x8 + 0x9>; + interrupt-parent = <&mpic>; + + }; + gef_gpio: gpio@7,14000 { + #gpio-cells = <2>; + compatible = "gef,ppc9a-gpio", "gef,sbc610-gpio"; + reg = <0x7 0x14000 0x24>; + gpio-controller; + }; + }; + + soc@fef00000 { + #address-cells = <1>; + #size-cells = <1>; + #interrupt-cells = <2>; + device_type = "soc"; + compatible = "fsl,mpc8641-soc", "simple-bus"; + ranges = <0x0 0xfef00000 0x00100000>; + bus-frequency = <33333333>; + + mcm-law@0 { + compatible = "fsl,mcm-law"; + reg = <0x0 0x1000>; + fsl,num-laws = <10>; + }; + + mcm@1000 { + compatible = "fsl,mpc8641-mcm", "fsl,mcm"; + reg = <0x1000 0x1000>; + interrupts = <17 2>; + interrupt-parent = <&mpic>; + }; + + i2c1: i2c@3000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl-i2c"; + reg = <0x3000 0x100>; + interrupts = <0x2b 0x2>; + interrupt-parent = <&mpic>; + dfsrr; + + hwmon@48 { + compatible = "national,lm92"; + reg = <0x48>; + }; + + hwmon@4c { + compatible = "adi,adt7461"; + reg = <0x4c>; + }; + + rtc@51 { + compatible = "epson,rx8581"; + reg = <0x00000051>; + }; + + eti@6b { + compatible = "dallas,ds1682"; + reg = <0x6b>; + }; + }; + + i2c2: i2c@3100 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl-i2c"; + reg = <0x3100 0x100>; + interrupts = <0x2b 0x2>; + interrupt-parent = <&mpic>; + dfsrr; + }; + + dma@21300 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,mpc8641-dma", "fsl,eloplus-dma"; + reg = <0x21300 0x4>; + ranges = <0x0 0x21100 0x200>; + cell-index = <0>; + dma-channel@0 { + compatible = "fsl,mpc8641-dma-channel", + "fsl,eloplus-dma-channel"; + reg = <0x0 0x80>; + cell-index = <0>; + interrupt-parent = <&mpic>; + interrupts = <20 2>; + }; + dma-channel@80 { + compatible = "fsl,mpc8641-dma-channel", + "fsl,eloplus-dma-channel"; + reg = <0x80 0x80>; + cell-index = <1>; + interrupt-parent = <&mpic>; + interrupts = <21 2>; + }; + dma-channel@100 { + compatible = "fsl,mpc8641-dma-channel", + "fsl,eloplus-dma-channel"; + reg = <0x100 0x80>; + cell-index = <2>; + interrupt-parent = <&mpic>; + interrupts = <22 2>; + }; + dma-channel@180 { + compatible = "fsl,mpc8641-dma-channel", + "fsl,eloplus-dma-channel"; + reg = <0x180 0x80>; + cell-index = <3>; + interrupt-parent = <&mpic>; + interrupts = <23 2>; + }; + }; + + enet0: ethernet@24000 { + #address-cells = <1>; + #size-cells = <1>; + cell-index = <0>; + device_type = "network"; + model = "TSEC"; + compatible = "gianfar"; + reg = <0x24000 0x1000>; + ranges = <0x0 0x24000 0x1000>; + local-mac-address = [ 00 00 00 00 00 00 ]; + interrupts = <29 2 30 2 34 2>; + interrupt-parent = <&mpic>; + tbi-handle = <&tbi0>; + phy-handle = <&phy0>; + phy-connection-type = "gmii"; + + mdio@520 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,gianfar-mdio"; + reg = <0x520 0x20>; + + phy0: ethernet-phy@0 { + interrupt-parent = <&gef_pic>; + interrupts = <0x9 0x4>; + reg = <1>; + }; + phy2: ethernet-phy@2 { + interrupt-parent = <&gef_pic>; + interrupts = <0x8 0x4>; + reg = <3>; + }; + tbi0: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + }; + + enet1: ethernet@26000 { + #address-cells = <1>; + #size-cells = <1>; + cell-index = <2>; + device_type = "network"; + model = "TSEC"; + compatible = "gianfar"; + reg = <0x26000 0x1000>; + ranges = <0x0 0x26000 0x1000>; + local-mac-address = [ 00 00 00 00 00 00 ]; + interrupts = <31 2 32 2 33 2>; + interrupt-parent = <&mpic>; + tbi-handle = <&tbi2>; + phy-handle = <&phy2>; + phy-connection-type = "gmii"; + + mdio@520 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,gianfar-tbi"; + reg = <0x520 0x20>; + + tbi2: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + }; + + serial0: serial@4500 { + cell-index = <0>; + device_type = "serial"; + compatible = "fsl,ns16550", "ns16550"; + reg = <0x4500 0x100>; + clock-frequency = <0>; + interrupts = <0x2a 0x2>; + interrupt-parent = <&mpic>; + }; + + serial1: serial@4600 { + cell-index = <1>; + device_type = "serial"; + compatible = "fsl,ns16550", "ns16550"; + reg = <0x4600 0x100>; + clock-frequency = <0>; + interrupts = <0x1c 0x2>; + interrupt-parent = <&mpic>; + }; + + mpic: pic@40000 { + clock-frequency = <0>; + interrupt-controller; + #address-cells = <0>; + #interrupt-cells = <2>; + reg = <0x40000 0x40000>; + compatible = "chrp,open-pic"; + device_type = "open-pic"; + }; + + msi@41600 { + compatible = "fsl,mpc8641-msi", "fsl,mpic-msi"; + reg = <0x41600 0x80>; + msi-available-ranges = <0 0x100>; + interrupts = < + 0xe0 0 + 0xe1 0 + 0xe2 0 + 0xe3 0 + 0xe4 0 + 0xe5 0 + 0xe6 0 + 0xe7 0>; + interrupt-parent = <&mpic>; + }; + + global-utilities@e0000 { + compatible = "fsl,mpc8641-guts"; + reg = <0xe0000 0x1000>; + fsl,has-rstcr; + }; + }; + + pci0: pcie@fef08000 { + compatible = "fsl,mpc8641-pcie"; + device_type = "pci"; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + reg = <0xfef08000 0x1000>; + bus-range = <0x0 0xff>; + ranges = <0x02000000 0x0 0x80000000 0x80000000 0x0 0x40000000 + 0x01000000 0x0 0x00000000 0xfe000000 0x0 0x00400000>; + clock-frequency = <33333333>; + interrupt-parent = <&mpic>; + interrupts = <0x18 0x2>; + interrupt-map-mask = <0xf800 0x0 0x0 0x7>; + interrupt-map = < + 0x0000 0x0 0x0 0x1 &mpic 0x0 0x1 + 0x0000 0x0 0x0 0x2 &mpic 0x1 0x1 + 0x0000 0x0 0x0 0x3 &mpic 0x2 0x1 + 0x0000 0x0 0x0 0x4 &mpic 0x3 0x1 + >; + + pcie@0 { + reg = <0 0 0 0 0>; + #size-cells = <2>; + #address-cells = <3>; + device_type = "pci"; + ranges = <0x02000000 0x0 0x80000000 + 0x02000000 0x0 0x80000000 + 0x0 0x40000000 + + 0x01000000 0x0 0x00000000 + 0x01000000 0x0 0x00000000 + 0x0 0x00400000>; + }; + }; +}; diff --git a/arch/powerpc/boot/dts/gef_sbc310.dts b/arch/powerpc/boot/dts/gef_sbc310.dts new file mode 100644 index 000000000..d426dd3de --- /dev/null +++ b/arch/powerpc/boot/dts/gef_sbc310.dts @@ -0,0 +1,459 @@ +/* + * GE SBC310 Device Tree Source + * + * Copyright 2008 GE Intelligent Platforms Embedded Systems, Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * Based on: SBS CM6 Device Tree Source + * Copyright 2007 SBS Technologies GmbH & Co. KG + * And: mpc8641_hpcn.dts (MPC8641 HPCN Device Tree Source) + * Copyright 2006 Freescale Semiconductor Inc. + */ + +/* + * Compiled with dtc -I dts -O dtb -o gef_sbc310.dtb gef_sbc310.dts + */ + +/dts-v1/; + +/ { + model = "GEF_SBC310"; + compatible = "gef,sbc310"; + #address-cells = <1>; + #size-cells = <1>; + + aliases { + ethernet0 = &enet0; + ethernet1 = &enet1; + serial0 = &serial0; + serial1 = &serial1; + pci0 = &pci0; + pci1 = &pci1; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + PowerPC,8641@0 { + device_type = "cpu"; + reg = <0>; + d-cache-line-size = <32>; // 32 bytes + i-cache-line-size = <32>; // 32 bytes + d-cache-size = <32768>; // L1, 32K + i-cache-size = <32768>; // L1, 32K + timebase-frequency = <0>; // From uboot + bus-frequency = <0>; // From uboot + clock-frequency = <0>; // From uboot + }; + PowerPC,8641@1 { + device_type = "cpu"; + reg = <1>; + d-cache-line-size = <32>; // 32 bytes + i-cache-line-size = <32>; // 32 bytes + d-cache-size = <32768>; // L1, 32K + i-cache-size = <32768>; // L1, 32K + timebase-frequency = <0>; // From uboot + bus-frequency = <0>; // From uboot + clock-frequency = <0>; // From uboot + }; + }; + + memory { + device_type = "memory"; + reg = <0x0 0x40000000>; // set by uboot + }; + + localbus@fef05000 { + #address-cells = <2>; + #size-cells = <1>; + compatible = "fsl,mpc8641-localbus", "simple-bus"; + reg = <0xfef05000 0x1000>; + interrupts = <19 2>; + interrupt-parent = <&mpic>; + + ranges = <0 0 0xff000000 0x01000000 // 16MB Boot flash + 1 0 0xe0000000 0x08000000 // Paged Flash 0 + 2 0 0xe8000000 0x08000000 // Paged Flash 1 + 3 0 0xfc100000 0x00020000 // NVRAM + 4 0 0xfc000000 0x00010000>; // FPGA + + /* flash@0,0 is a mirror of part of the memory in flash@1,0 + flash@0,0 { + compatible = "gef,sbc310-firmware-mirror", "cfi-flash"; + reg = <0x0 0x0 0x01000000>; + bank-width = <2>; + device-width = <2>; + #address-cells = <1>; + #size-cells = <1>; + partition@0 { + label = "firmware"; + reg = <0x0 0x01000000>; + read-only; + }; + }; + */ + + flash@1,0 { + compatible = "gef,sbc310-paged-flash", "cfi-flash"; + reg = <0x1 0x0 0x8000000>; + bank-width = <2>; + device-width = <2>; + #address-cells = <1>; + #size-cells = <1>; + partition@0 { + label = "user"; + reg = <0x0 0x7800000>; + }; + partition@7800000 { + label = "firmware"; + reg = <0x7800000 0x800000>; + read-only; + }; + }; + + nvram@3,0 { + device_type = "nvram"; + compatible = "simtek,stk14ca8"; + reg = <0x3 0x0 0x20000>; + }; + + fpga@4,0 { + compatible = "gef,fpga-regs"; + reg = <0x4 0x0 0x40>; + }; + + wdt@4,2000 { + compatible = "gef,sbc310-fpga-wdt", "gef,fpga-wdt-1.00", + "gef,fpga-wdt"; + reg = <0x4 0x2000 0x8>; + interrupts = <0x1a 0x4>; + interrupt-parent = <&gef_pic>; + }; +/* + wdt@4,2010 { + compatible = "gef,sbc310-fpga-wdt", "gef,fpga-wdt-1.00", + "gef,fpga-wdt"; + reg = <0x4 0x2010 0x8>; + interrupts = <0x1b 0x4>; + interrupt-parent = <&gef_pic>; + }; +*/ + gef_pic: pic@4,4000 { + #interrupt-cells = <1>; + interrupt-controller; + compatible = "gef,sbc310-fpga-pic", "gef,fpga-pic"; + reg = <0x4 0x4000 0x20>; + interrupts = <0x8 + 0x9>; + interrupt-parent = <&mpic>; + + }; + gef_gpio: gpio@4,8000 { + #gpio-cells = <2>; + compatible = "gef,sbc310-gpio"; + reg = <0x4 0x8000 0x24>; + gpio-controller; + }; + }; + + soc@fef00000 { + #address-cells = <1>; + #size-cells = <1>; + #interrupt-cells = <2>; + device_type = "soc"; + compatible = "fsl,mpc8641-soc", "simple-bus"; + ranges = <0x0 0xfef00000 0x00100000>; + bus-frequency = <33333333>; + + mcm-law@0 { + compatible = "fsl,mcm-law"; + reg = <0x0 0x1000>; + fsl,num-laws = <10>; + }; + + mcm@1000 { + compatible = "fsl,mpc8641-mcm", "fsl,mcm"; + reg = <0x1000 0x1000>; + interrupts = <17 2>; + interrupt-parent = <&mpic>; + }; + + i2c1: i2c@3000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl-i2c"; + reg = <0x3000 0x100>; + interrupts = <0x2b 0x2>; + interrupt-parent = <&mpic>; + dfsrr; + + rtc@51 { + compatible = "epson,rx8581"; + reg = <0x00000051>; + }; + }; + + i2c2: i2c@3100 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl-i2c"; + reg = <0x3100 0x100>; + interrupts = <0x2b 0x2>; + interrupt-parent = <&mpic>; + dfsrr; + + hwmon@48 { + compatible = "national,lm92"; + reg = <0x48>; + }; + + hwmon@4c { + compatible = "adi,adt7461"; + reg = <0x4c>; + }; + + eti@6b { + compatible = "dallas,ds1682"; + reg = <0x6b>; + }; + }; + + dma@21300 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,mpc8641-dma", "fsl,eloplus-dma"; + reg = <0x21300 0x4>; + ranges = <0x0 0x21100 0x200>; + cell-index = <0>; + dma-channel@0 { + compatible = "fsl,mpc8641-dma-channel", + "fsl,eloplus-dma-channel"; + reg = <0x0 0x80>; + cell-index = <0>; + interrupt-parent = <&mpic>; + interrupts = <20 2>; + }; + dma-channel@80 { + compatible = "fsl,mpc8641-dma-channel", + "fsl,eloplus-dma-channel"; + reg = <0x80 0x80>; + cell-index = <1>; + interrupt-parent = <&mpic>; + interrupts = <21 2>; + }; + dma-channel@100 { + compatible = "fsl,mpc8641-dma-channel", + "fsl,eloplus-dma-channel"; + reg = <0x100 0x80>; + cell-index = <2>; + interrupt-parent = <&mpic>; + interrupts = <22 2>; + }; + dma-channel@180 { + compatible = "fsl,mpc8641-dma-channel", + "fsl,eloplus-dma-channel"; + reg = <0x180 0x80>; + cell-index = <3>; + interrupt-parent = <&mpic>; + interrupts = <23 2>; + }; + }; + + enet0: ethernet@24000 { + #address-cells = <1>; + #size-cells = <1>; + cell-index = <0>; + device_type = "network"; + model = "TSEC"; + compatible = "gianfar"; + reg = <0x24000 0x1000>; + ranges = <0x0 0x24000 0x1000>; + local-mac-address = [ 00 00 00 00 00 00 ]; + interrupts = <29 2 30 2 34 2>; + interrupt-parent = <&mpic>; + tbi-handle = <&tbi0>; + phy-handle = <&phy0>; + phy-connection-type = "gmii"; + + mdio@520 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,gianfar-mdio"; + reg = <0x520 0x20>; + + phy0: ethernet-phy@0 { + interrupt-parent = <&gef_pic>; + interrupts = <0x9 0x4>; + reg = <1>; + }; + phy2: ethernet-phy@2 { + interrupt-parent = <&gef_pic>; + interrupts = <0x8 0x4>; + reg = <3>; + }; + tbi0: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + }; + + enet1: ethernet@26000 { + #address-cells = <1>; + #size-cells = <1>; + cell-index = <2>; + device_type = "network"; + model = "TSEC"; + compatible = "gianfar"; + reg = <0x26000 0x1000>; + ranges = <0x0 0x26000 0x1000>; + local-mac-address = [ 00 00 00 00 00 00 ]; + interrupts = <31 2 32 2 33 2>; + interrupt-parent = <&mpic>; + tbi-handle = <&tbi2>; + phy-handle = <&phy2>; + phy-connection-type = "gmii"; + + mdio@520 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,gianfar-tbi"; + reg = <0x520 0x20>; + + tbi2: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + }; + + serial0: serial@4500 { + cell-index = <0>; + device_type = "serial"; + compatible = "fsl,ns16550", "ns16550"; + reg = <0x4500 0x100>; + clock-frequency = <0>; + interrupts = <0x2a 0x2>; + interrupt-parent = <&mpic>; + }; + + serial1: serial@4600 { + cell-index = <1>; + device_type = "serial"; + compatible = "fsl,ns16550", "ns16550"; + reg = <0x4600 0x100>; + clock-frequency = <0>; + interrupts = <0x1c 0x2>; + interrupt-parent = <&mpic>; + }; + + mpic: pic@40000 { + clock-frequency = <0>; + interrupt-controller; + #address-cells = <0>; + #interrupt-cells = <2>; + reg = <0x40000 0x40000>; + compatible = "chrp,open-pic"; + device_type = "open-pic"; + }; + + msi@41600 { + compatible = "fsl,mpc8641-msi", "fsl,mpic-msi"; + reg = <0x41600 0x80>; + msi-available-ranges = <0 0x100>; + interrupts = < + 0xe0 0 + 0xe1 0 + 0xe2 0 + 0xe3 0 + 0xe4 0 + 0xe5 0 + 0xe6 0 + 0xe7 0>; + interrupt-parent = <&mpic>; + }; + + global-utilities@e0000 { + compatible = "fsl,mpc8641-guts"; + reg = <0xe0000 0x1000>; + fsl,has-rstcr; + }; + }; + + pci0: pcie@fef08000 { + compatible = "fsl,mpc8641-pcie"; + device_type = "pci"; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + reg = <0xfef08000 0x1000>; + bus-range = <0x0 0xff>; + ranges = <0x02000000 0x0 0x80000000 0x80000000 0x0 0x40000000 + 0x01000000 0x0 0x00000000 0xfe000000 0x0 0x00400000>; + clock-frequency = <33333333>; + interrupt-parent = <&mpic>; + interrupts = <0x18 0x2>; + interrupt-map-mask = <0xff00 0x0 0x0 0x7>; + interrupt-map = < + 0x0000 0x0 0x0 0x1 &mpic 0x0 0x2 + 0x0000 0x0 0x0 0x2 &mpic 0x1 0x2 + 0x0000 0x0 0x0 0x3 &mpic 0x2 0x2 + 0x0000 0x0 0x0 0x4 &mpic 0x3 0x2 + >; + + pcie@0 { + reg = <0 0 0 0 0>; + #size-cells = <2>; + #address-cells = <3>; + device_type = "pci"; + ranges = <0x02000000 0x0 0x80000000 + 0x02000000 0x0 0x80000000 + 0x0 0x40000000 + + 0x01000000 0x0 0x00000000 + 0x01000000 0x0 0x00000000 + 0x0 0x00400000>; + }; + }; + + pci1: pcie@fef09000 { + compatible = "fsl,mpc8641-pcie"; + device_type = "pci"; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + reg = <0xfef09000 0x1000>; + bus-range = <0x0 0xff>; + ranges = <0x02000000 0x0 0xc0000000 0xc0000000 0x0 0x20000000 + 0x01000000 0x0 0x00000000 0xfe400000 0x0 0x00400000>; + clock-frequency = <33333333>; + interrupt-parent = <&mpic>; + interrupts = <0x19 0x2>; + interrupt-map-mask = <0xf800 0x0 0x0 0x7>; + interrupt-map = < + 0x0000 0x0 0x0 0x1 &mpic 0x4 0x2 + 0x0000 0x0 0x0 0x2 &mpic 0x5 0x2 + 0x0000 0x0 0x0 0x3 &mpic 0x6 0x2 + 0x0000 0x0 0x0 0x4 &mpic 0x7 0x2 + >; + + pcie@0 { + reg = <0 0 0 0 0>; + #size-cells = <2>; + #address-cells = <3>; + device_type = "pci"; + ranges = <0x02000000 0x0 0xc0000000 + 0x02000000 0x0 0xc0000000 + 0x0 0x20000000 + + 0x01000000 0x0 0x00000000 + 0x01000000 0x0 0x00000000 + 0x0 0x00400000>; + }; + }; +}; diff --git a/arch/powerpc/boot/dts/gef_sbc610.dts b/arch/powerpc/boot/dts/gef_sbc610.dts new file mode 100644 index 000000000..5db3399b7 --- /dev/null +++ b/arch/powerpc/boot/dts/gef_sbc610.dts @@ -0,0 +1,423 @@ +/* + * GE SBC610 Device Tree Source + * + * Copyright 2008 GE Intelligent Platforms Embedded Systems, Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * Based on: SBS CM6 Device Tree Source + * Copyright 2007 SBS Technologies GmbH & Co. KG + * And: mpc8641_hpcn.dts (MPC8641 HPCN Device Tree Source) + * Copyright 2006 Freescale Semiconductor Inc. + */ + +/* + * Compiled with dtc -I dts -O dtb -o gef_sbc610.dtb gef_sbc610.dts + */ + +/dts-v1/; + +/ { + model = "GEF_SBC610"; + compatible = "gef,sbc610"; + #address-cells = <1>; + #size-cells = <1>; + + aliases { + ethernet0 = &enet0; + ethernet1 = &enet1; + serial0 = &serial0; + serial1 = &serial1; + pci0 = &pci0; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + PowerPC,8641@0 { + device_type = "cpu"; + reg = <0>; + d-cache-line-size = <32>; // 32 bytes + i-cache-line-size = <32>; // 32 bytes + d-cache-size = <32768>; // L1, 32K + i-cache-size = <32768>; // L1, 32K + timebase-frequency = <0>; // From uboot + bus-frequency = <0>; // From uboot + clock-frequency = <0>; // From uboot + }; + PowerPC,8641@1 { + device_type = "cpu"; + reg = <1>; + d-cache-line-size = <32>; // 32 bytes + i-cache-line-size = <32>; // 32 bytes + d-cache-size = <32768>; // L1, 32K + i-cache-size = <32768>; // L1, 32K + timebase-frequency = <0>; // From uboot + bus-frequency = <0>; // From uboot + clock-frequency = <0>; // From uboot + }; + }; + + memory { + device_type = "memory"; + reg = <0x0 0x40000000>; // set by uboot + }; + + localbus@fef05000 { + #address-cells = <2>; + #size-cells = <1>; + compatible = "fsl,mpc8641-localbus", "simple-bus"; + reg = <0xfef05000 0x1000>; + interrupts = <19 2>; + interrupt-parent = <&mpic>; + + ranges = <0 0 0xff000000 0x01000000 // 16MB Boot flash + 1 0 0xe8000000 0x08000000 // Paged Flash 0 + 2 0 0xe0000000 0x08000000 // Paged Flash 1 + 3 0 0xfc100000 0x00020000 // NVRAM + 4 0 0xfc000000 0x00008000 // FPGA + 5 0 0xfc008000 0x00008000 // AFIX FPGA + 6 0 0xfd000000 0x00800000 // IO FPGA (8-bit) + 7 0 0xfd800000 0x00800000>; // IO FPGA (32-bit) + + /* flash@0,0 is a mirror of part of the memory in flash@1,0 + flash@0,0 { + compatible = "gef,sbc610-firmware-mirror", "cfi-flash"; + reg = <0x0 0x0 0x1000000>; + bank-width = <4>; + device-width = <2>; + #address-cells = <1>; + #size-cells = <1>; + partition@0 { + label = "firmware"; + reg = <0x0 0x1000000>; + read-only; + }; + }; + */ + + flash@1,0 { + compatible = "gef,sbc610-paged-flash", "cfi-flash"; + reg = <0x1 0x0 0x8000000>; + bank-width = <4>; + device-width = <2>; + #address-cells = <1>; + #size-cells = <1>; + partition@0 { + label = "user"; + reg = <0x0 0x7800000>; + }; + partition@7800000 { + label = "firmware"; + reg = <0x7800000 0x800000>; + read-only; + }; + }; + + nvram@3,0 { + device_type = "nvram"; + compatible = "simtek,stk14ca8"; + reg = <0x3 0x0 0x20000>; + }; + + fpga@4,0 { + compatible = "gef,fpga-regs"; + reg = <0x4 0x0 0x40>; + }; + + wdt@4,2000 { + compatible = "gef,fpga-wdt"; + reg = <0x4 0x2000 0x8>; + interrupts = <0x1a 0x4>; + interrupt-parent = <&gef_pic>; + }; + /* Second watchdog available, driver currently supports one. + wdt@4,2010 { + compatible = "gef,fpga-wdt"; + reg = <0x4 0x2010 0x8>; + interrupts = <0x1b 0x4>; + interrupt-parent = <&gef_pic>; + }; + */ + gef_pic: pic@4,4000 { + #interrupt-cells = <1>; + interrupt-controller; + compatible = "gef,fpga-pic"; + reg = <0x4 0x4000 0x20>; + interrupts = <0x8 + 0x9>; + interrupt-parent = <&mpic>; + + }; + gef_gpio: gpio@7,14000 { + #gpio-cells = <2>; + compatible = "gef,sbc610-gpio"; + reg = <0x7 0x14000 0x24>; + gpio-controller; + }; + }; + + soc@fef00000 { + #address-cells = <1>; + #size-cells = <1>; + #interrupt-cells = <2>; + device_type = "soc"; + compatible = "simple-bus"; + ranges = <0x0 0xfef00000 0x00100000>; + bus-frequency = <33333333>; + + mcm-law@0 { + compatible = "fsl,mcm-law"; + reg = <0x0 0x1000>; + fsl,num-laws = <10>; + }; + + mcm@1000 { + compatible = "fsl,mpc8641-mcm", "fsl,mcm"; + reg = <0x1000 0x1000>; + interrupts = <17 2>; + interrupt-parent = <&mpic>; + }; + + i2c1: i2c@3000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl-i2c"; + reg = <0x3000 0x100>; + interrupts = <0x2b 0x2>; + interrupt-parent = <&mpic>; + dfsrr; + + hwmon@48 { + compatible = "national,lm92"; + reg = <0x48>; + }; + + hwmon@4c { + compatible = "adi,adt7461"; + reg = <0x4c>; + }; + + rtc@51 { + compatible = "epson,rx8581"; + reg = <0x00000051>; + }; + + eti@6b { + compatible = "dallas,ds1682"; + reg = <0x6b>; + }; + }; + + i2c2: i2c@3100 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl-i2c"; + reg = <0x3100 0x100>; + interrupts = <0x2b 0x2>; + interrupt-parent = <&mpic>; + dfsrr; + }; + + dma@21300 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,mpc8641-dma", "fsl,eloplus-dma"; + reg = <0x21300 0x4>; + ranges = <0x0 0x21100 0x200>; + cell-index = <0>; + dma-channel@0 { + compatible = "fsl,mpc8641-dma-channel", + "fsl,eloplus-dma-channel"; + reg = <0x0 0x80>; + cell-index = <0>; + interrupt-parent = <&mpic>; + interrupts = <20 2>; + }; + dma-channel@80 { + compatible = "fsl,mpc8641-dma-channel", + "fsl,eloplus-dma-channel"; + reg = <0x80 0x80>; + cell-index = <1>; + interrupt-parent = <&mpic>; + interrupts = <21 2>; + }; + dma-channel@100 { + compatible = "fsl,mpc8641-dma-channel", + "fsl,eloplus-dma-channel"; + reg = <0x100 0x80>; + cell-index = <2>; + interrupt-parent = <&mpic>; + interrupts = <22 2>; + }; + dma-channel@180 { + compatible = "fsl,mpc8641-dma-channel", + "fsl,eloplus-dma-channel"; + reg = <0x180 0x80>; + cell-index = <3>; + interrupt-parent = <&mpic>; + interrupts = <23 2>; + }; + }; + + enet0: ethernet@24000 { + #address-cells = <1>; + #size-cells = <1>; + cell-index = <0>; + device_type = "network"; + model = "TSEC"; + compatible = "gianfar"; + reg = <0x24000 0x1000>; + ranges = <0x0 0x24000 0x1000>; + local-mac-address = [ 00 00 00 00 00 00 ]; + interrupts = <29 2 30 2 34 2>; + interrupt-parent = <&mpic>; + tbi-handle = <&tbi0>; + phy-handle = <&phy0>; + phy-connection-type = "gmii"; + + mdio@520 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,gianfar-mdio"; + reg = <0x520 0x20>; + + phy0: ethernet-phy@0 { + interrupt-parent = <&gef_pic>; + interrupts = <0x9 0x4>; + reg = <1>; + }; + phy2: ethernet-phy@2 { + interrupt-parent = <&gef_pic>; + interrupts = <0x8 0x4>; + reg = <3>; + }; + tbi0: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + }; + + enet1: ethernet@26000 { + #address-cells = <1>; + #size-cells = <1>; + cell-index = <2>; + device_type = "network"; + model = "TSEC"; + compatible = "gianfar"; + reg = <0x26000 0x1000>; + ranges = <0x0 0x26000 0x1000>; + local-mac-address = [ 00 00 00 00 00 00 ]; + interrupts = <31 2 32 2 33 2>; + interrupt-parent = <&mpic>; + tbi-handle = <&tbi2>; + phy-handle = <&phy2>; + phy-connection-type = "gmii"; + + mdio@520 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,gianfar-tbi"; + reg = <0x520 0x20>; + + tbi2: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + }; + + serial0: serial@4500 { + cell-index = <0>; + device_type = "serial"; + compatible = "fsl,ns16550", "ns16550"; + reg = <0x4500 0x100>; + clock-frequency = <0>; + interrupts = <0x2a 0x2>; + interrupt-parent = <&mpic>; + }; + + serial1: serial@4600 { + cell-index = <1>; + device_type = "serial"; + compatible = "fsl,ns16550", "ns16550"; + reg = <0x4600 0x100>; + clock-frequency = <0>; + interrupts = <0x1c 0x2>; + interrupt-parent = <&mpic>; + }; + + mpic: pic@40000 { + clock-frequency = <0>; + interrupt-controller; + #address-cells = <0>; + #interrupt-cells = <2>; + reg = <0x40000 0x40000>; + compatible = "chrp,open-pic"; + device_type = "open-pic"; + }; + + msi@41600 { + compatible = "fsl,mpc8641-msi", "fsl,mpic-msi"; + reg = <0x41600 0x80>; + msi-available-ranges = <0 0x100>; + interrupts = < + 0xe0 0 + 0xe1 0 + 0xe2 0 + 0xe3 0 + 0xe4 0 + 0xe5 0 + 0xe6 0 + 0xe7 0>; + interrupt-parent = <&mpic>; + }; + + global-utilities@e0000 { + compatible = "fsl,mpc8641-guts"; + reg = <0xe0000 0x1000>; + fsl,has-rstcr; + }; + }; + + pci0: pcie@fef08000 { + compatible = "fsl,mpc8641-pcie"; + device_type = "pci"; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + reg = <0xfef08000 0x1000>; + bus-range = <0x0 0xff>; + ranges = <0x02000000 0x0 0x80000000 0x80000000 0x0 0x40000000 + 0x01000000 0x0 0x00000000 0xfe000000 0x0 0x00400000>; + clock-frequency = <33333333>; + interrupt-parent = <&mpic>; + interrupts = <0x18 0x2>; + interrupt-map-mask = <0xf800 0x0 0x0 0x7>; + interrupt-map = < + 0x0000 0x0 0x0 0x1 &mpic 0x0 0x1 + 0x0000 0x0 0x0 0x2 &mpic 0x1 0x1 + 0x0000 0x0 0x0 0x3 &mpic 0x2 0x1 + 0x0000 0x0 0x0 0x4 &mpic 0x3 0x1 + >; + + pcie@0 { + reg = <0 0 0 0 0>; + #size-cells = <2>; + #address-cells = <3>; + device_type = "pci"; + ranges = <0x02000000 0x0 0x80000000 + 0x02000000 0x0 0x80000000 + 0x0 0x40000000 + + 0x01000000 0x0 0x00000000 + 0x01000000 0x0 0x00000000 + 0x0 0x00400000>; + }; + }; +}; diff --git a/arch/powerpc/boot/dts/glacier.dts b/arch/powerpc/boot/dts/glacier.dts new file mode 100644 index 000000000..200006038 --- /dev/null +++ b/arch/powerpc/boot/dts/glacier.dts @@ -0,0 +1,576 @@ +/* + * Device Tree Source for AMCC Glacier (460GT) + * + * Copyright 2008-2010 DENX Software Engineering, Stefan Roese <sr@denx.de> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without + * any warranty of any kind, whether express or implied. + */ + +/dts-v1/; + +/ { + #address-cells = <2>; + #size-cells = <1>; + model = "amcc,glacier"; + compatible = "amcc,glacier"; + dcr-parent = <&{/cpus/cpu@0}>; + + aliases { + ethernet0 = &EMAC0; + ethernet1 = &EMAC1; + ethernet2 = &EMAC2; + ethernet3 = &EMAC3; + serial0 = &UART0; + serial1 = &UART1; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu@0 { + device_type = "cpu"; + model = "PowerPC,460GT"; + reg = <0x00000000>; + clock-frequency = <0>; /* Filled in by U-Boot */ + timebase-frequency = <0>; /* Filled in by U-Boot */ + i-cache-line-size = <32>; + d-cache-line-size = <32>; + i-cache-size = <32768>; + d-cache-size = <32768>; + dcr-controller; + dcr-access-method = "native"; + next-level-cache = <&L2C0>; + }; + }; + + memory { + device_type = "memory"; + reg = <0x00000000 0x00000000 0x00000000>; /* Filled in by U-Boot */ + }; + + UIC0: interrupt-controller0 { + compatible = "ibm,uic-460gt","ibm,uic"; + interrupt-controller; + cell-index = <0>; + dcr-reg = <0x0c0 0x009>; + #address-cells = <0>; + #size-cells = <0>; + #interrupt-cells = <2>; + }; + + UIC1: interrupt-controller1 { + compatible = "ibm,uic-460gt","ibm,uic"; + interrupt-controller; + cell-index = <1>; + dcr-reg = <0x0d0 0x009>; + #address-cells = <0>; + #size-cells = <0>; + #interrupt-cells = <2>; + interrupts = <0x1e 0x4 0x1f 0x4>; /* cascade */ + interrupt-parent = <&UIC0>; + }; + + UIC2: interrupt-controller2 { + compatible = "ibm,uic-460gt","ibm,uic"; + interrupt-controller; + cell-index = <2>; + dcr-reg = <0x0e0 0x009>; + #address-cells = <0>; + #size-cells = <0>; + #interrupt-cells = <2>; + interrupts = <0xa 0x4 0xb 0x4>; /* cascade */ + interrupt-parent = <&UIC0>; + }; + + UIC3: interrupt-controller3 { + compatible = "ibm,uic-460gt","ibm,uic"; + interrupt-controller; + cell-index = <3>; + dcr-reg = <0x0f0 0x009>; + #address-cells = <0>; + #size-cells = <0>; + #interrupt-cells = <2>; + interrupts = <0x10 0x4 0x11 0x4>; /* cascade */ + interrupt-parent = <&UIC0>; + }; + + SDR0: sdr { + compatible = "ibm,sdr-460gt"; + dcr-reg = <0x00e 0x002>; + }; + + CPR0: cpr { + compatible = "ibm,cpr-460gt"; + dcr-reg = <0x00c 0x002>; + }; + + L2C0: l2c { + compatible = "ibm,l2-cache-460gt", "ibm,l2-cache"; + dcr-reg = <0x020 0x008 /* Internal SRAM DCR's */ + 0x030 0x008>; /* L2 cache DCR's */ + cache-line-size = <32>; /* 32 bytes */ + cache-size = <262144>; /* L2, 256K */ + interrupt-parent = <&UIC1>; + interrupts = <11 1>; + }; + + plb { + compatible = "ibm,plb-460gt", "ibm,plb4"; + #address-cells = <2>; + #size-cells = <1>; + ranges; + clock-frequency = <0>; /* Filled in by U-Boot */ + + SDRAM0: sdram { + compatible = "ibm,sdram-460gt", "ibm,sdram-405gp"; + dcr-reg = <0x010 0x002>; + }; + + CRYPTO: crypto@180000 { + compatible = "amcc,ppc460gt-crypto", "amcc,ppc460ex-crypto", + "amcc,ppc4xx-crypto"; + reg = <4 0x00180000 0x80400>; + interrupt-parent = <&UIC0>; + interrupts = <0x1d 0x4>; + }; + + HWRNG: hwrng@110000 { + compatible = "amcc,ppc460ex-rng", "ppc4xx-rng"; + reg = <4 0x00110000 0x50>; + }; + + MAL0: mcmal { + compatible = "ibm,mcmal-460gt", "ibm,mcmal2"; + dcr-reg = <0x180 0x062>; + num-tx-chans = <4>; + num-rx-chans = <32>; + #address-cells = <0>; + #size-cells = <0>; + interrupt-parent = <&UIC2>; + interrupts = < /*TXEOB*/ 0x6 0x4 + /*RXEOB*/ 0x7 0x4 + /*SERR*/ 0x3 0x4 + /*TXDE*/ 0x4 0x4 + /*RXDE*/ 0x5 0x4>; + desc-base-addr-high = <0x8>; + }; + + POB0: opb { + compatible = "ibm,opb-460gt", "ibm,opb"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0xb0000000 0x00000004 0xb0000000 0x50000000>; + clock-frequency = <0>; /* Filled in by U-Boot */ + + EBC0: ebc { + compatible = "ibm,ebc-460gt", "ibm,ebc"; + dcr-reg = <0x012 0x002>; + #address-cells = <2>; + #size-cells = <1>; + clock-frequency = <0>; /* Filled in by U-Boot */ + /* ranges property is supplied by U-Boot */ + interrupts = <0x6 0x4>; + interrupt-parent = <&UIC1>; + + nor_flash@0,0 { + compatible = "amd,s29gl512n", "cfi-flash"; + bank-width = <2>; + reg = <0x00000000 0x00000000 0x04000000>; + #address-cells = <1>; + #size-cells = <1>; + partition@0 { + label = "kernel"; + reg = <0x00000000 0x001e0000>; + }; + partition@1e0000 { + label = "dtb"; + reg = <0x001e0000 0x00020000>; + }; + partition@200000 { + label = "ramdisk"; + reg = <0x00200000 0x01400000>; + }; + partition@1600000 { + label = "jffs2"; + reg = <0x01600000 0x00400000>; + }; + partition@1a00000 { + label = "user"; + reg = <0x01a00000 0x02560000>; + }; + partition@3f60000 { + label = "env"; + reg = <0x03f60000 0x00040000>; + }; + partition@3fa0000 { + label = "u-boot"; + reg = <0x03fa0000 0x00060000>; + }; + }; + + ndfc@3,0 { + compatible = "ibm,ndfc"; + reg = <0x00000003 0x00000000 0x00002000>; + ccr = <0x00001000>; + bank-settings = <0x80002222>; + #address-cells = <1>; + #size-cells = <1>; + + nand { + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "u-boot"; + reg = <0x00000000 0x00100000>; + }; + partition@100000 { + label = "user"; + reg = <0x00000000 0x03f00000>; + }; + }; + }; + }; + + UART0: serial@ef600300 { + device_type = "serial"; + compatible = "ns16550"; + reg = <0xef600300 0x00000008>; + virtual-reg = <0xef600300>; + clock-frequency = <0>; /* Filled in by U-Boot */ + current-speed = <0>; /* Filled in by U-Boot */ + interrupt-parent = <&UIC1>; + interrupts = <0x1 0x4>; + }; + + UART1: serial@ef600400 { + device_type = "serial"; + compatible = "ns16550"; + reg = <0xef600400 0x00000008>; + virtual-reg = <0xef600400>; + clock-frequency = <0>; /* Filled in by U-Boot */ + current-speed = <0>; /* Filled in by U-Boot */ + interrupt-parent = <&UIC0>; + interrupts = <0x1 0x4>; + }; + + UART2: serial@ef600500 { + device_type = "serial"; + compatible = "ns16550"; + reg = <0xef600500 0x00000008>; + virtual-reg = <0xef600500>; + clock-frequency = <0>; /* Filled in by U-Boot */ + current-speed = <0>; /* Filled in by U-Boot */ + interrupt-parent = <&UIC1>; + interrupts = <28 0x4>; + }; + + UART3: serial@ef600600 { + device_type = "serial"; + compatible = "ns16550"; + reg = <0xef600600 0x00000008>; + virtual-reg = <0xef600600>; + clock-frequency = <0>; /* Filled in by U-Boot */ + current-speed = <0>; /* Filled in by U-Boot */ + interrupt-parent = <&UIC1>; + interrupts = <29 0x4>; + }; + + IIC0: i2c@ef600700 { + compatible = "ibm,iic-460gt", "ibm,iic"; + reg = <0xef600700 0x00000014>; + interrupt-parent = <&UIC0>; + interrupts = <0x2 0x4>; + #address-cells = <1>; + #size-cells = <0>; + rtc@68 { + compatible = "stm,m41t80"; + reg = <0x68>; + interrupt-parent = <&UIC2>; + interrupts = <0x19 0x8>; + }; + sttm@48 { + compatible = "ad,ad7414"; + reg = <0x48>; + interrupt-parent = <&UIC1>; + interrupts = <0x14 0x8>; + }; + }; + + IIC1: i2c@ef600800 { + compatible = "ibm,iic-460gt", "ibm,iic"; + reg = <0xef600800 0x00000014>; + interrupt-parent = <&UIC0>; + interrupts = <0x3 0x4>; + }; + + ZMII0: emac-zmii@ef600d00 { + compatible = "ibm,zmii-460gt", "ibm,zmii"; + reg = <0xef600d00 0x0000000c>; + }; + + RGMII0: emac-rgmii@ef601500 { + compatible = "ibm,rgmii-460gt", "ibm,rgmii"; + reg = <0xef601500 0x00000008>; + has-mdio; + }; + + RGMII1: emac-rgmii@ef601600 { + compatible = "ibm,rgmii-460gt", "ibm,rgmii"; + reg = <0xef601600 0x00000008>; + has-mdio; + }; + + TAH0: emac-tah@ef601350 { + compatible = "ibm,tah-460gt", "ibm,tah"; + reg = <0xef601350 0x00000030>; + }; + + TAH1: emac-tah@ef601450 { + compatible = "ibm,tah-460gt", "ibm,tah"; + reg = <0xef601450 0x00000030>; + }; + + EMAC0: ethernet@ef600e00 { + device_type = "network"; + compatible = "ibm,emac-460gt", "ibm,emac4sync"; + interrupt-parent = <&EMAC0>; + interrupts = <0x0 0x1>; + #interrupt-cells = <1>; + #address-cells = <0>; + #size-cells = <0>; + interrupt-map = </*Status*/ 0x0 &UIC2 0x10 0x4 + /*Wake*/ 0x1 &UIC2 0x14 0x4>; + reg = <0xef600e00 0x000000c4>; + local-mac-address = [000000000000]; /* Filled in by U-Boot */ + mal-device = <&MAL0>; + mal-tx-channel = <0>; + mal-rx-channel = <0>; + cell-index = <0>; + max-frame-size = <9000>; + rx-fifo-size = <4096>; + tx-fifo-size = <2048>; + rx-fifo-size-gige = <16384>; + phy-mode = "rgmii"; + phy-map = <0x00000000>; + rgmii-device = <&RGMII0>; + rgmii-channel = <0>; + tah-device = <&TAH0>; + tah-channel = <0>; + has-inverted-stacr-oc; + has-new-stacr-staopc; + }; + + EMAC1: ethernet@ef600f00 { + device_type = "network"; + compatible = "ibm,emac-460gt", "ibm,emac4sync"; + interrupt-parent = <&EMAC1>; + interrupts = <0x0 0x1>; + #interrupt-cells = <1>; + #address-cells = <0>; + #size-cells = <0>; + interrupt-map = </*Status*/ 0x0 &UIC2 0x11 0x4 + /*Wake*/ 0x1 &UIC2 0x15 0x4>; + reg = <0xef600f00 0x000000c4>; + local-mac-address = [000000000000]; /* Filled in by U-Boot */ + mal-device = <&MAL0>; + mal-tx-channel = <1>; + mal-rx-channel = <8>; + cell-index = <1>; + max-frame-size = <9000>; + rx-fifo-size = <4096>; + tx-fifo-size = <2048>; + rx-fifo-size-gige = <16384>; + phy-mode = "rgmii"; + phy-map = <0x00000000>; + rgmii-device = <&RGMII0>; + rgmii-channel = <1>; + tah-device = <&TAH1>; + tah-channel = <1>; + has-inverted-stacr-oc; + has-new-stacr-staopc; + mdio-device = <&EMAC0>; + }; + + EMAC2: ethernet@ef601100 { + device_type = "network"; + compatible = "ibm,emac-460gt", "ibm,emac4sync"; + interrupt-parent = <&EMAC2>; + interrupts = <0x0 0x1>; + #interrupt-cells = <1>; + #address-cells = <0>; + #size-cells = <0>; + interrupt-map = </*Status*/ 0x0 &UIC2 0x12 0x4 + /*Wake*/ 0x1 &UIC2 0x16 0x4>; + reg = <0xef601100 0x000000c4>; + local-mac-address = [000000000000]; /* Filled in by U-Boot */ + mal-device = <&MAL0>; + mal-tx-channel = <2>; + mal-rx-channel = <16>; + cell-index = <2>; + max-frame-size = <9000>; + rx-fifo-size = <4096>; + tx-fifo-size = <2048>; + rx-fifo-size-gige = <16384>; + tx-fifo-size-gige = <16384>; /* emac2&3 only */ + phy-mode = "rgmii"; + phy-map = <0x00000000>; + rgmii-device = <&RGMII1>; + rgmii-channel = <0>; + has-inverted-stacr-oc; + has-new-stacr-staopc; + mdio-device = <&EMAC0>; + }; + + EMAC3: ethernet@ef601200 { + device_type = "network"; + compatible = "ibm,emac-460gt", "ibm,emac4sync"; + interrupt-parent = <&EMAC3>; + interrupts = <0x0 0x1>; + #interrupt-cells = <1>; + #address-cells = <0>; + #size-cells = <0>; + interrupt-map = </*Status*/ 0x0 &UIC2 0x13 0x4 + /*Wake*/ 0x1 &UIC2 0x17 0x4>; + reg = <0xef601200 0x000000c4>; + local-mac-address = [000000000000]; /* Filled in by U-Boot */ + mal-device = <&MAL0>; + mal-tx-channel = <3>; + mal-rx-channel = <24>; + cell-index = <3>; + max-frame-size = <9000>; + rx-fifo-size = <4096>; + tx-fifo-size = <2048>; + rx-fifo-size-gige = <16384>; + tx-fifo-size-gige = <16384>; /* emac2&3 only */ + phy-mode = "rgmii"; + phy-map = <0x00000000>; + rgmii-device = <&RGMII1>; + rgmii-channel = <1>; + has-inverted-stacr-oc; + has-new-stacr-staopc; + mdio-device = <&EMAC0>; + }; + }; + + PCIX0: pci@c0ec00000 { + device_type = "pci"; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + compatible = "ibm,plb-pcix-460gt", "ibm,plb-pcix"; + primary; + large-inbound-windows; + enable-msi-hole; + reg = <0x0000000c 0x0ec00000 0x00000008 /* Config space access */ + 0x00000000 0x00000000 0x00000000 /* no IACK cycles */ + 0x0000000c 0x0ed00000 0x00000004 /* Special cycles */ + 0x0000000c 0x0ec80000 0x00000100 /* Internal registers */ + 0x0000000c 0x0ec80100 0x000000fc>; /* Internal messaging registers */ + + /* Outbound ranges, one memory and one IO, + * later cannot be changed + */ + ranges = <0x02000000 0x00000000 0x80000000 0x0000000d 0x80000000 0x00000000 0x80000000 + 0x02000000 0x00000000 0x00000000 0x0000000c 0x0ee00000 0x00000000 0x00100000 + 0x01000000 0x00000000 0x00000000 0x0000000c 0x08000000 0x00000000 0x00010000>; + + /* Inbound 2GB range starting at 0 */ + dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x0 0x80000000>; + + /* This drives busses 0 to 0x3f */ + bus-range = <0x0 0x3f>; + + /* All PCI interrupts are routed to ext IRQ 2 -> UIC1-0 */ + interrupt-map-mask = <0x0 0x0 0x0 0x0>; + interrupt-map = < 0x0 0x0 0x0 0x0 &UIC1 0x0 0x8 >; + }; + + PCIE0: pciex@d00000000 { + device_type = "pci"; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + compatible = "ibm,plb-pciex-460ex", "ibm,plb-pciex"; + primary; + port = <0x0>; /* port number */ + reg = <0x0000000d 0x00000000 0x20000000 /* Config space access */ + 0x0000000c 0x08010000 0x00001000>; /* Registers */ + dcr-reg = <0x100 0x020>; + sdr-base = <0x300>; + + /* Outbound ranges, one memory and one IO, + * later cannot be changed + */ + ranges = <0x02000000 0x00000000 0x80000000 0x0000000e 0x00000000 0x00000000 0x80000000 + 0x02000000 0x00000000 0x00000000 0x0000000f 0x00000000 0x00000000 0x00100000 + 0x01000000 0x00000000 0x00000000 0x0000000f 0x80000000 0x00000000 0x00010000>; + + /* Inbound 2GB range starting at 0 */ + dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x0 0x80000000>; + + /* This drives busses 40 to 0x7f */ + bus-range = <0x40 0x7f>; + + /* Legacy interrupts (note the weird polarity, the bridge seems + * to invert PCIe legacy interrupts). + * We are de-swizzling here because the numbers are actually for + * port of the root complex virtual P2P bridge. But I want + * to avoid putting a node for it in the tree, so the numbers + * below are basically de-swizzled numbers. + * The real slot is on idsel 0, so the swizzling is 1:1 + */ + interrupt-map-mask = <0x0 0x0 0x0 0x7>; + interrupt-map = < + 0x0 0x0 0x0 0x1 &UIC3 0xc 0x4 /* swizzled int A */ + 0x0 0x0 0x0 0x2 &UIC3 0xd 0x4 /* swizzled int B */ + 0x0 0x0 0x0 0x3 &UIC3 0xe 0x4 /* swizzled int C */ + 0x0 0x0 0x0 0x4 &UIC3 0xf 0x4 /* swizzled int D */>; + }; + + PCIE1: pciex@d20000000 { + device_type = "pci"; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + compatible = "ibm,plb-pciex-460ex", "ibm,plb-pciex"; + primary; + port = <0x1>; /* port number */ + reg = <0x0000000d 0x20000000 0x20000000 /* Config space access */ + 0x0000000c 0x08011000 0x00001000>; /* Registers */ + dcr-reg = <0x120 0x020>; + sdr-base = <0x340>; + + /* Outbound ranges, one memory and one IO, + * later cannot be changed + */ + ranges = <0x02000000 0x00000000 0x80000000 0x0000000e 0x80000000 0x00000000 0x80000000 + 0x02000000 0x00000000 0x00000000 0x0000000f 0x00100000 0x00000000 0x00100000 + 0x01000000 0x00000000 0x00000000 0x0000000f 0x80010000 0x00000000 0x00010000>; + + /* Inbound 2GB range starting at 0 */ + dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x0 0x80000000>; + + /* This drives busses 80 to 0xbf */ + bus-range = <0x80 0xbf>; + + /* Legacy interrupts (note the weird polarity, the bridge seems + * to invert PCIe legacy interrupts). + * We are de-swizzling here because the numbers are actually for + * port of the root complex virtual P2P bridge. But I want + * to avoid putting a node for it in the tree, so the numbers + * below are basically de-swizzled numbers. + * The real slot is on idsel 0, so the swizzling is 1:1 + */ + interrupt-map-mask = <0x0 0x0 0x0 0x7>; + interrupt-map = < + 0x0 0x0 0x0 0x1 &UIC3 0x10 0x4 /* swizzled int A */ + 0x0 0x0 0x0 0x2 &UIC3 0x11 0x4 /* swizzled int B */ + 0x0 0x0 0x0 0x3 &UIC3 0x12 0x4 /* swizzled int C */ + 0x0 0x0 0x0 0x4 &UIC3 0x13 0x4 /* swizzled int D */>; + }; + }; +}; diff --git a/arch/powerpc/boot/dts/haleakala.dts b/arch/powerpc/boot/dts/haleakala.dts new file mode 100644 index 000000000..2b256694e --- /dev/null +++ b/arch/powerpc/boot/dts/haleakala.dts @@ -0,0 +1,281 @@ +/* + * Device Tree Source for AMCC Haleakala (405EXr) + * + * Copyright 2008 DENX Software Engineering, Stefan Roese <sr@denx.de> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without + * any warranty of any kind, whether express or implied. + */ + +/dts-v1/; + +/ { + #address-cells = <1>; + #size-cells = <1>; + model = "amcc,haleakala"; + compatible = "amcc,haleakala", "amcc,kilauea"; + dcr-parent = <&{/cpus/cpu@0}>; + + aliases { + ethernet0 = &EMAC0; + serial0 = &UART0; + serial1 = &UART1; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu@0 { + device_type = "cpu"; + model = "PowerPC,405EXr"; + reg = <0x00000000>; + clock-frequency = <0>; /* Filled in by U-Boot */ + timebase-frequency = <0>; /* Filled in by U-Boot */ + i-cache-line-size = <32>; + d-cache-line-size = <32>; + i-cache-size = <16384>; /* 16 kB */ + d-cache-size = <16384>; /* 16 kB */ + dcr-controller; + dcr-access-method = "native"; + }; + }; + + memory { + device_type = "memory"; + reg = <0x00000000 0x00000000>; /* Filled in by U-Boot */ + }; + + UIC0: interrupt-controller { + compatible = "ibm,uic-405exr", "ibm,uic"; + interrupt-controller; + cell-index = <0>; + dcr-reg = <0x0c0 0x009>; + #address-cells = <0>; + #size-cells = <0>; + #interrupt-cells = <2>; + }; + + UIC1: interrupt-controller1 { + compatible = "ibm,uic-405exr","ibm,uic"; + interrupt-controller; + cell-index = <1>; + dcr-reg = <0x0d0 0x009>; + #address-cells = <0>; + #size-cells = <0>; + #interrupt-cells = <2>; + interrupts = <0x1e 0x4 0x1f 0x4>; /* cascade */ + interrupt-parent = <&UIC0>; + }; + + UIC2: interrupt-controller2 { + compatible = "ibm,uic-405exr","ibm,uic"; + interrupt-controller; + cell-index = <2>; + dcr-reg = <0x0e0 0x009>; + #address-cells = <0>; + #size-cells = <0>; + #interrupt-cells = <2>; + interrupts = <0x1c 0x4 0x1d 0x4>; /* cascade */ + interrupt-parent = <&UIC0>; + }; + + plb { + compatible = "ibm,plb-405exr", "ibm,plb4"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + clock-frequency = <0>; /* Filled in by U-Boot */ + + SDRAM0: memory-controller { + compatible = "ibm,sdram-405exr", "ibm,sdram-4xx-ddr2"; + dcr-reg = <0x010 0x002>; + interrupt-parent = <&UIC2>; + interrupts = <0x5 0x4 /* ECC DED Error */ + 0x6 0x4>; /* ECC SEC Error */ + }; + + MAL0: mcmal { + compatible = "ibm,mcmal-405exr", "ibm,mcmal2"; + dcr-reg = <0x180 0x062>; + num-tx-chans = <2>; + num-rx-chans = <2>; + interrupt-parent = <&MAL0>; + interrupts = <0x0 0x1 0x2 0x3 0x4>; + #interrupt-cells = <1>; + #address-cells = <0>; + #size-cells = <0>; + interrupt-map = </*TXEOB*/ 0x0 &UIC0 0xa 0x4 + /*RXEOB*/ 0x1 &UIC0 0xb 0x4 + /*SERR*/ 0x2 &UIC1 0x0 0x4 + /*TXDE*/ 0x3 &UIC1 0x1 0x4 + /*RXDE*/ 0x4 &UIC1 0x2 0x4>; + interrupt-map-mask = <0xffffffff>; + }; + + POB0: opb { + compatible = "ibm,opb-405exr", "ibm,opb"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x80000000 0x80000000 0x10000000 + 0xef600000 0xef600000 0x00a00000 + 0xf0000000 0xf0000000 0x10000000>; + dcr-reg = <0x0a0 0x005>; + clock-frequency = <0>; /* Filled in by U-Boot */ + + EBC0: ebc { + compatible = "ibm,ebc-405exr", "ibm,ebc"; + dcr-reg = <0x012 0x002>; + #address-cells = <2>; + #size-cells = <1>; + clock-frequency = <0>; /* Filled in by U-Boot */ + /* ranges property is supplied by U-Boot */ + interrupts = <0x5 0x1>; + interrupt-parent = <&UIC1>; + + nor_flash@0,0 { + compatible = "amd,s29gl512n", "cfi-flash"; + bank-width = <2>; + reg = <0x00000000 0x00000000 0x04000000>; + #address-cells = <1>; + #size-cells = <1>; + partition@0 { + label = "kernel"; + reg = <0x00000000 0x00200000>; + }; + partition@200000 { + label = "root"; + reg = <0x00200000 0x00200000>; + }; + partition@400000 { + label = "user"; + reg = <0x00400000 0x03b60000>; + }; + partition@3f60000 { + label = "env"; + reg = <0x03f60000 0x00040000>; + }; + partition@3fa0000 { + label = "u-boot"; + reg = <0x03fa0000 0x00060000>; + }; + }; + }; + + UART0: serial@ef600200 { + device_type = "serial"; + compatible = "ns16550"; + reg = <0xef600200 0x00000008>; + virtual-reg = <0xef600200>; + clock-frequency = <0>; /* Filled in by U-Boot */ + current-speed = <0>; + interrupt-parent = <&UIC0>; + interrupts = <0x1a 0x4>; + }; + + UART1: serial@ef600300 { + device_type = "serial"; + compatible = "ns16550"; + reg = <0xef600300 0x00000008>; + virtual-reg = <0xef600300>; + clock-frequency = <0>; /* Filled in by U-Boot */ + current-speed = <0>; + interrupt-parent = <&UIC0>; + interrupts = <0x1 0x4>; + }; + + IIC0: i2c@ef600400 { + compatible = "ibm,iic-405exr", "ibm,iic"; + reg = <0xef600400 0x00000014>; + interrupt-parent = <&UIC0>; + interrupts = <0x2 0x4>; + }; + + IIC1: i2c@ef600500 { + compatible = "ibm,iic-405exr", "ibm,iic"; + reg = <0xef600500 0x00000014>; + interrupt-parent = <&UIC0>; + interrupts = <0x7 0x4>; + }; + + + RGMII0: emac-rgmii@ef600b00 { + compatible = "ibm,rgmii-405exr", "ibm,rgmii"; + reg = <0xef600b00 0x00000104>; + has-mdio; + }; + + EMAC0: ethernet@ef600900 { + linux,network-index = <0x0>; + device_type = "network"; + compatible = "ibm,emac-405exr", "ibm,emac4sync"; + interrupt-parent = <&EMAC0>; + interrupts = <0x0 0x1>; + #interrupt-cells = <1>; + #address-cells = <0>; + #size-cells = <0>; + interrupt-map = </*Status*/ 0x0 &UIC0 0x18 0x4 + /*Wake*/ 0x1 &UIC1 0x1d 0x4>; + reg = <0xef600900 0x000000c4>; + local-mac-address = [000000000000]; /* Filled in by U-Boot */ + mal-device = <&MAL0>; + mal-tx-channel = <0>; + mal-rx-channel = <0>; + cell-index = <0>; + max-frame-size = <9000>; + rx-fifo-size = <4096>; + tx-fifo-size = <2048>; + rx-fifo-size-gige = <16384>; + tx-fifo-size-gige = <16384>; + phy-mode = "rgmii"; + phy-map = <0x00000000>; + rgmii-device = <&RGMII0>; + rgmii-channel = <0>; + has-inverted-stacr-oc; + has-new-stacr-staopc; + }; + }; + + PCIE0: pciex@0a0000000 { + device_type = "pci"; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + compatible = "ibm,plb-pciex-405ex", "ibm,plb-pciex"; + primary; + port = <0x0>; /* port number */ + reg = <0xa0000000 0x20000000 /* Config space access */ + 0xef000000 0x00001000>; /* Registers */ + dcr-reg = <0x040 0x020>; + sdr-base = <0x400>; + + /* Outbound ranges, one memory and one IO, + * later cannot be changed + */ + ranges = <0x02000000 0x00000000 0x80000000 0x90000000 0x00000000 0x08000000 + 0x01000000 0x00000000 0x00000000 0xe0000000 0x00000000 0x00010000>; + + /* Inbound 2GB range starting at 0 */ + dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x80000000>; + + /* This drives busses 0x00 to 0x3f */ + bus-range = <0x0 0x3f>; + + /* Legacy interrupts (note the weird polarity, the bridge seems + * to invert PCIe legacy interrupts). + * We are de-swizzling here because the numbers are actually for + * port of the root complex virtual P2P bridge. But I want + * to avoid putting a node for it in the tree, so the numbers + * below are basically de-swizzled numbers. + * The real slot is on idsel 0, so the swizzling is 1:1 + */ + interrupt-map-mask = <0x0 0x0 0x0 0x7>; + interrupt-map = < + 0x0 0x0 0x0 0x1 &UIC2 0x0 0x4 /* swizzled int A */ + 0x0 0x0 0x0 0x2 &UIC2 0x1 0x4 /* swizzled int B */ + 0x0 0x0 0x0 0x3 &UIC2 0x2 0x4 /* swizzled int C */ + 0x0 0x0 0x0 0x4 &UIC2 0x3 0x4 /* swizzled int D */>; + }; + }; +}; diff --git a/arch/powerpc/boot/dts/holly.dts b/arch/powerpc/boot/dts/holly.dts new file mode 100644 index 000000000..43e6f0c8e --- /dev/null +++ b/arch/powerpc/boot/dts/holly.dts @@ -0,0 +1,196 @@ +/* + * Device Tree Source for IBM Holly (PPC 750CL with TSI controller) + * Copyright 2007, IBM Corporation + * + * Stephen Winiecki <stevewin@us.ibm.com> + * Josh Boyer <jwboyer@linux.vnet.ibm.com> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without + * any warranty of any kind, whether express or implied. + */ + +/dts-v1/; + +/ { + model = "41K7339"; + compatible = "ibm,holly"; + #address-cells = <1>; + #size-cells = <1>; + + cpus { + #address-cells = <1>; + #size-cells =<0>; + PowerPC,750CL@0 { + device_type = "cpu"; + reg = <0x00000000>; + d-cache-line-size = <32>; + i-cache-line-size = <32>; + d-cache-size = <32768>; + i-cache-size = <32768>; + d-cache-sets = <128>; + i-cache-sets = <128>; + timebase-frequency = <50000000>; + clock-frequency = <600000000>; + bus-frequency = <200000000>; + }; + }; + + memory@0 { + device_type = "memory"; + reg = <0x00000000 0x20000000>; + }; + + tsi109@c0000000 { + device_type = "tsi-bridge"; + compatible = "tsi109-bridge", "tsi108-bridge"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x00000000 0xc0000000 0x00010000>; + reg = <0xc0000000 0x00010000>; + + i2c@7000 { + device_type = "i2c"; + compatible = "tsi109-i2c", "tsi108-i2c"; + interrupt-parent = <&MPIC>; + interrupts = <0xe 0x2>; + reg = <0x00007000 0x00000400>; + }; + + MDIO: mdio@6000 { + compatible = "tsi109-mdio", "tsi108-mdio"; + reg = <0x00006000 0x00000050>; + #address-cells = <1>; + #size-cells = <0>; + + PHY1: ethernet-phy@1 { + compatible = "bcm5461a"; + reg = <0x00000001>; + txc-rxc-delay-disable; + }; + + PHY2: ethernet-phy@2 { + compatible = "bcm5461a"; + reg = <0x00000002>; + txc-rxc-delay-disable; + }; + }; + + ethernet@6200 { + device_type = "network"; + compatible = "tsi109-ethernet", "tsi108-ethernet"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x00006000 0x00000200>; + local-mac-address = [ 00 00 00 00 00 00 ]; + interrupt-parent = <&MPIC>; + interrupts = <0x10 0x2>; + mdio-handle = <&MDIO>; + phy-handle = <&PHY1>; + }; + + ethernet@6600 { + device_type = "network"; + compatible = "tsi109-ethernet", "tsi108-ethernet"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x00006400 0x00000200>; + local-mac-address = [ 00 00 00 00 00 00 ]; + interrupt-parent = <&MPIC>; + interrupts = <0x11 0x2>; + mdio-handle = <&MDIO>; + phy-handle = <&PHY2>; + }; + + serial@7808 { + device_type = "serial"; + compatible = "ns16550"; + reg = <0x00007808 0x00000200>; + virtual-reg = <0xc0007808>; + clock-frequency = <1067212800>; + current-speed = <115200>; + interrupt-parent = <&MPIC>; + interrupts = <0xc 0x2>; + }; + + serial@7c08 { + device_type = "serial"; + compatible = "ns16550"; + reg = <0x00007c08 0x00000200>; + virtual-reg = <0xc0007c08>; + clock-frequency = <1067212800>; + current-speed = <115200>; + interrupt-parent = <&MPIC>; + interrupts = <0xd 0x2>; + }; + + MPIC: pic@7400 { + device_type = "open-pic"; + compatible = "chrp,open-pic"; + interrupt-controller; + #interrupt-cells = <2>; + reg = <0x00007400 0x00000400>; + big-endian; + }; + }; + + pci@c0001000 { + device_type = "pci"; + compatible = "tsi109-pci", "tsi108-pci"; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + reg = <0xc0001000 0x00001000>; + bus-range = <0x0 0x0>; + /*----------------------------------------------------+ + | PCI memory range. + | 01 denotes I/O space + | 02 denotes 32-bit memory space + +----------------------------------------------------*/ + ranges = <0x02000000 0x00000000 0x40000000 0x40000000 0x00000000 0x10000000 + 0x01000000 0x00000000 0x00000000 0x7e000000 0x00000000 0x00010000>; + clock-frequency = <133333332>; + interrupt-parent = <&MPIC>; + interrupts = <0x17 0x2>; + interrupt-map-mask = <0xf800 0x0 0x0 0x7>; + /*----------------------------------------------------+ + | The INTA, INTB, INTC, INTD are shared. + +----------------------------------------------------*/ + interrupt-map = < + 0x800 0x0 0x0 0x1 &RT0 0x24 0x0 + 0x800 0x0 0x0 0x2 &RT0 0x25 0x0 + 0x800 0x0 0x0 0x3 &RT0 0x26 0x0 + 0x800 0x0 0x0 0x4 &RT0 0x27 0x0 + + 0x1000 0x0 0x0 0x1 &RT0 0x25 0x0 + 0x1000 0x0 0x0 0x2 &RT0 0x26 0x0 + 0x1000 0x0 0x0 0x3 &RT0 0x27 0x0 + 0x1000 0x0 0x0 0x4 &RT0 0x24 0x0 + + 0x1800 0x0 0x0 0x1 &RT0 0x26 0x0 + 0x1800 0x0 0x0 0x2 &RT0 0x27 0x0 + 0x1800 0x0 0x0 0x3 &RT0 0x24 0x0 + 0x1800 0x0 0x0 0x4 &RT0 0x25 0x0 + + 0x2000 0x0 0x0 0x1 &RT0 0x27 0x0 + 0x2000 0x0 0x0 0x2 &RT0 0x24 0x0 + 0x2000 0x0 0x0 0x3 &RT0 0x25 0x0 + 0x2000 0x0 0x0 0x4 &RT0 0x26 0x0 + >; + + RT0: router@1180 { + device_type = "pic-router"; + interrupt-controller; + big-endian; + clock-frequency = <0>; + #address-cells = <0>; + #interrupt-cells = <2>; + interrupts = <0x17 0x2>; + interrupt-parent = <&MPIC>; + }; + }; + + chosen { + linux,stdout-path = "/tsi109@c0000000/serial@7808"; + }; +}; diff --git a/arch/powerpc/boot/dts/hotfoot.dts b/arch/powerpc/boot/dts/hotfoot.dts new file mode 100644 index 000000000..71d3bb493 --- /dev/null +++ b/arch/powerpc/boot/dts/hotfoot.dts @@ -0,0 +1,296 @@ +/* + * Device Tree Source for ESTeem 195E Hotfoot + * + * Copyright 2009 AbsoluteValue Systems <solomon@linux-wlan.com> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without + * any warranty of any kind, whether express or implied. + */ + +/dts-v1/; + +/ { + #address-cells = <1>; + #size-cells = <1>; + model = "est,hotfoot"; + compatible = "est,hotfoot"; + dcr-parent = <&{/cpus/cpu@0}>; + + aliases { + ethernet0 = &EMAC0; + ethernet1 = &EMAC1; + serial0 = &UART0; + serial1 = &UART1; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu@0 { + device_type = "cpu"; + model = "PowerPC,405EP"; + reg = <0x00000000>; + clock-frequency = <0>; /* Filled in by zImage */ + timebase-frequency = <0>; /* Filled in by zImage */ + i-cache-line-size = <0x20>; + d-cache-line-size = <0x20>; + i-cache-size = <0x4000>; + d-cache-size = <0x4000>; + dcr-controller; + dcr-access-method = "native"; + }; + }; + + memory { + device_type = "memory"; + reg = <0x00000000 0x00000000>; /* Filled in by zImage */ + }; + + UIC0: interrupt-controller { + compatible = "ibm,uic"; + interrupt-controller; + cell-index = <0>; + dcr-reg = <0x0c0 0x009>; + #address-cells = <0>; + #size-cells = <0>; + #interrupt-cells = <2>; + }; + + plb { + compatible = "ibm,plb3"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + clock-frequency = <0>; /* Filled in by zImage */ + + SDRAM0: memory-controller { + compatible = "ibm,sdram-405ep"; + dcr-reg = <0x010 0x002>; + }; + + MAL: mcmal { + compatible = "ibm,mcmal-405ep", "ibm,mcmal"; + dcr-reg = <0x180 0x062>; + num-tx-chans = <4>; + num-rx-chans = <2>; + interrupt-parent = <&UIC0>; + interrupts = < + 0xb 0x4 /* TXEOB */ + 0xc 0x4 /* RXEOB */ + 0xa 0x4 /* SERR */ + 0xd 0x4 /* TXDE */ + 0xe 0x4 /* RXDE */>; + }; + + POB0: opb { + compatible = "ibm,opb-405ep", "ibm,opb"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0xef600000 0xef600000 0x00a00000>; + dcr-reg = <0x0a0 0x005>; + clock-frequency = <0>; /* Filled in by zImage */ + + /* Hotfoot has UART0/UART1 swapped */ + + UART0: serial@ef600400 { + device_type = "serial"; + compatible = "ns16550"; + reg = <0xef600400 0x00000008>; + virtual-reg = <0xef600400>; + clock-frequency = <0>; /* Filled in by zImage */ + current-speed = <0x9600>; + interrupt-parent = <&UIC0>; + interrupts = <0x1 0x4>; + }; + + UART1: serial@ef600300 { + device_type = "serial"; + compatible = "ns16550"; + reg = <0xef600300 0x00000008>; + virtual-reg = <0xef600300>; + clock-frequency = <0>; /* Filled in by zImage */ + current-speed = <0x9600>; + interrupt-parent = <&UIC0>; + interrupts = <0x0 0x4>; + }; + + IIC: i2c@ef600500 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "ibm,iic-405ep", "ibm,iic"; + reg = <0xef600500 0x00000011>; + interrupt-parent = <&UIC0>; + interrupts = <0x2 0x4>; + + rtc@68 { + /* Actually a DS1339 */ + compatible = "dallas,ds1307"; + reg = <0x68>; + }; + + temp@4a { + /* Not present on all boards */ + compatible = "national,lm75"; + reg = <0x4a>; + }; + }; + + GPIO: gpio@ef600700 { + #gpio-cells = <2>; + compatible = "ibm,ppc4xx-gpio"; + reg = <0xef600700 0x00000020>; + gpio-controller; + }; + + gpio-leds { + compatible = "gpio-leds"; + status { + label = "Status"; + gpios = <&GPIO 1 0>; + }; + radiorx { + label = "Rx"; + gpios = <&GPIO 0xe 0>; + }; + }; + + EMAC0: ethernet@ef600800 { + linux,network-index = <0x0>; + device_type = "network"; + compatible = "ibm,emac-405ep", "ibm,emac"; + interrupt-parent = <&UIC0>; + interrupts = < + 0xf 0x4 /* Ethernet */ + 0x9 0x4 /* Ethernet Wake Up */>; + local-mac-address = [000000000000]; /* Filled in by zImage */ + reg = <0xef600800 0x00000070>; + mal-device = <&MAL>; + mal-tx-channel = <0>; + mal-rx-channel = <0>; + cell-index = <0>; + max-frame-size = <0x5dc>; + rx-fifo-size = <0x1000>; + tx-fifo-size = <0x800>; + phy-mode = "mii"; + phy-map = <0x00000000>; + }; + + EMAC1: ethernet@ef600900 { + linux,network-index = <0x1>; + device_type = "network"; + compatible = "ibm,emac-405ep", "ibm,emac"; + interrupt-parent = <&UIC0>; + interrupts = < + 0x11 0x4 /* Ethernet */ + 0x9 0x4 /* Ethernet Wake Up */>; + local-mac-address = [000000000000]; /* Filled in by zImage */ + reg = <0xef600900 0x00000070>; + mal-device = <&MAL>; + mal-tx-channel = <2>; + mal-rx-channel = <1>; + cell-index = <1>; + max-frame-size = <0x5dc>; + rx-fifo-size = <0x1000>; + tx-fifo-size = <0x800>; + mdio-device = <&EMAC0>; + phy-mode = "mii"; + phy-map = <0x0000001>; + }; + }; + + EBC0: ebc { + compatible = "ibm,ebc-405ep", "ibm,ebc"; + dcr-reg = <0x012 0x002>; + #address-cells = <2>; + #size-cells = <1>; + + /* The ranges property is supplied by the bootwrapper + * and is based on the firmware's configuration of the + * EBC bridge + */ + clock-frequency = <0>; /* Filled in by zImage */ + + nor_flash@0 { + compatible = "cfi-flash"; + bank-width = <2>; + reg = <0x0 0xff800000 0x00800000>; + #address-cells = <1>; + #size-cells = <1>; + + /* This mapping is for the 8M flash + 4M flash has all ofssets -= 4M, + and FeatFS partition is not present */ + partition@0 { + label = "Bootloader"; + reg = <0x7c0000 0x40000>; + /* read-only; */ + }; + partition@1 { + label = "Env_and_Config_Primary"; + reg = <0x400000 0x10000>; + }; + partition@2 { + label = "Kernel"; + reg = <0x420000 0x100000>; + }; + partition@3 { + label = "Filesystem"; + reg = <0x520000 0x2a0000>; + }; + partition@4 { + label = "Env_and_Config_Secondary"; + reg = <0x410000 0x10000>; + }; + partition@5 { + label = "FeatFS"; + reg = <0x000000 0x400000>; + }; + partition@6 { + label = "Bootloader_Env"; + reg = <0x7d0000 0x10000>; + }; + }; + }; + + PCI0: pci@ec000000 { + device_type = "pci"; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + compatible = "ibm,plb405ep-pci", "ibm,plb-pci"; + primary; + reg = <0xeec00000 0x00000008 /* Config space access */ + 0xeed80000 0x00000004 /* IACK */ + 0xeed80000 0x00000004 /* Special cycle */ + 0xef480000 0x00000040>; /* Internal registers */ + + /* Outbound ranges, one memory and one IO, + * later cannot be changed. Chip supports a second + * IO range but we don't use it for now + */ + ranges = <0x02000000 0x00000000 0x80000000 0x80000000 0x00000000 0x20000000 + 0x01000000 0x00000000 0x00000000 0xe8000000 0x00000000 0x00010000>; + + /* Inbound 2GB range starting at 0 */ + dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x80000000>; + + interrupt-parent = <&UIC0>; + interrupt-map-mask = <0xf800 0x0 0x0 0x7>; + interrupt-map = < + /* IDSEL 3 -- slot1 (optional) 27/29 A/B IRQ2/4 */ + 0x1800 0x0 0x0 0x1 &UIC0 0x1b 0x8 + 0x1800 0x0 0x0 0x2 &UIC0 0x1d 0x8 + + /* IDSEL 4 -- slot0, 26/28 A/B IRQ1/3 */ + 0x2000 0x0 0x0 0x1 &UIC0 0x1a 0x8 + 0x2000 0x0 0x0 0x2 &UIC0 0x1c 0x8 + >; + }; + }; + + chosen { + linux,stdout-path = &UART0; + }; +}; diff --git a/arch/powerpc/boot/dts/icon.dts b/arch/powerpc/boot/dts/icon.dts new file mode 100644 index 000000000..abcd0caec --- /dev/null +++ b/arch/powerpc/boot/dts/icon.dts @@ -0,0 +1,447 @@ +/* + * Device Tree Source for Mosaix Technologies, Inc. ICON board + * + * Copyright 2010 DENX Software Engineering, Stefan Roese <sr@denx.de> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without + * any warranty of any kind, whether express or implied. + */ + +/dts-v1/; + +/ { + #address-cells = <2>; + #size-cells = <2>; + model = "mosaixtech,icon"; + compatible = "mosaixtech,icon"; + dcr-parent = <&{/cpus/cpu@0}>; + + aliases { + ethernet0 = &EMAC0; + serial0 = &UART0; + serial1 = &UART1; + serial2 = &UART2; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu@0 { + device_type = "cpu"; + model = "PowerPC,440SPe"; + reg = <0x00000000>; + clock-frequency = <0>; /* Filled in by U-Boot */ + timebase-frequency = <0>; /* Filled in by U-Boot */ + i-cache-line-size = <32>; + d-cache-line-size = <32>; + i-cache-size = <32768>; + d-cache-size = <32768>; + dcr-controller; + dcr-access-method = "native"; + reset-type = <2>; /* Use chip-reset */ + }; + }; + + memory { + device_type = "memory"; + reg = <0x0 0x00000000 0x0 0x00000000>; /* Filled in by U-Boot */ + }; + + UIC0: interrupt-controller0 { + compatible = "ibm,uic-440spe","ibm,uic"; + interrupt-controller; + cell-index = <0>; + dcr-reg = <0x0c0 0x009>; + #address-cells = <0>; + #size-cells = <0>; + #interrupt-cells = <2>; + }; + + UIC1: interrupt-controller1 { + compatible = "ibm,uic-440spe","ibm,uic"; + interrupt-controller; + cell-index = <1>; + dcr-reg = <0x0d0 0x009>; + #address-cells = <0>; + #size-cells = <0>; + #interrupt-cells = <2>; + interrupts = <0x1e 0x4 0x1f 0x4>; /* cascade */ + interrupt-parent = <&UIC0>; + }; + + UIC2: interrupt-controller2 { + compatible = "ibm,uic-440spe","ibm,uic"; + interrupt-controller; + cell-index = <2>; + dcr-reg = <0x0e0 0x009>; + #address-cells = <0>; + #size-cells = <0>; + #interrupt-cells = <2>; + interrupts = <0xa 0x4 0xb 0x4>; /* cascade */ + interrupt-parent = <&UIC0>; + }; + + UIC3: interrupt-controller3 { + compatible = "ibm,uic-440spe","ibm,uic"; + interrupt-controller; + cell-index = <3>; + dcr-reg = <0x0f0 0x009>; + #address-cells = <0>; + #size-cells = <0>; + #interrupt-cells = <2>; + interrupts = <0x10 0x4 0x11 0x4>; /* cascade */ + interrupt-parent = <&UIC0>; + }; + + SDR0: sdr { + compatible = "ibm,sdr-440spe"; + dcr-reg = <0x00e 0x002>; + }; + + CPR0: cpr { + compatible = "ibm,cpr-440spe"; + dcr-reg = <0x00c 0x002>; + }; + + MQ0: mq { + compatible = "ibm,mq-440spe"; + dcr-reg = <0x040 0x020>; + }; + + plb { + compatible = "ibm,plb-440spe", "ibm,plb-440gp", "ibm,plb4"; + #address-cells = <2>; + #size-cells = <1>; + /* addr-child addr-parent size */ + ranges = <0x4 0x00100000 0x4 0x00100000 0x00001000 + 0x4 0x00200000 0x4 0x00200000 0x00000400 + 0x4 0xe0000000 0x4 0xe0000000 0x20000000 + 0xc 0x00000000 0xc 0x00000000 0x20000000 + 0xd 0x00000000 0xd 0x00000000 0x80000000 + 0xd 0x80000000 0xd 0x80000000 0x80000000 + 0xe 0x00000000 0xe 0x00000000 0x80000000 + 0xe 0x80000000 0xe 0x80000000 0x80000000 + 0xf 0x00000000 0xf 0x00000000 0x80000000 + 0xf 0x80000000 0xf 0x80000000 0x80000000>; + clock-frequency = <0>; /* Filled in by U-Boot */ + + SDRAM0: sdram { + compatible = "ibm,sdram-440spe", "ibm,sdram-405gp"; + dcr-reg = <0x010 0x002>; + }; + + MAL0: mcmal { + compatible = "ibm,mcmal-440spe", "ibm,mcmal2"; + dcr-reg = <0x180 0x062>; + num-tx-chans = <2>; + num-rx-chans = <1>; + interrupt-parent = <&MAL0>; + interrupts = <0x0 0x1 0x2 0x3 0x4>; + #interrupt-cells = <1>; + #address-cells = <0>; + #size-cells = <0>; + interrupt-map = </*TXEOB*/ 0x0 &UIC1 0x6 0x4 + /*RXEOB*/ 0x1 &UIC1 0x7 0x4 + /*SERR*/ 0x2 &UIC1 0x1 0x4 + /*TXDE*/ 0x3 &UIC1 0x2 0x4 + /*RXDE*/ 0x4 &UIC1 0x3 0x4>; + }; + + POB0: opb { + compatible = "ibm,opb-440spe", "ibm,opb-440gp", "ibm,opb"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0xe0000000 0x00000004 0xe0000000 0x20000000>; + clock-frequency = <0>; /* Filled in by U-Boot */ + + EBC0: ebc { + compatible = "ibm,ebc-440spe", "ibm,ebc-440gp", "ibm,ebc"; + dcr-reg = <0x012 0x002>; + #address-cells = <2>; + #size-cells = <1>; + clock-frequency = <0>; /* Filled in by U-Boot */ + /* ranges property is supplied by U-Boot */ + interrupts = <0x5 0x1>; + interrupt-parent = <&UIC1>; + + nor_flash@0,0 { + compatible = "cfi-flash"; + bank-width = <2>; + reg = <0x00000000 0x00000000 0x01000000>; + #address-cells = <1>; + #size-cells = <1>; + partition@0 { + label = "kernel"; + reg = <0x00000000 0x001e0000>; + }; + partition@1e0000 { + label = "dtb"; + reg = <0x001e0000 0x00020000>; + }; + partition@200000 { + label = "root"; + reg = <0x00200000 0x00200000>; + }; + partition@400000 { + label = "user"; + reg = <0x00400000 0x00b60000>; + }; + partition@f60000 { + label = "env"; + reg = <0x00f60000 0x00040000>; + }; + partition@fa0000 { + label = "u-boot"; + reg = <0x00fa0000 0x00060000>; + }; + }; + + SysACE_CompactFlash: sysace@1,0 { + compatible = "xlnx,sysace"; + interrupt-parent = <&UIC2>; + interrupts = <24 0x4>; + reg = <0x00000001 0x00000000 0x10000>; + }; + }; + + UART0: serial@f0000200 { + device_type = "serial"; + compatible = "ns16550"; + reg = <0xf0000200 0x00000008>; + virtual-reg = <0xa0000200>; + clock-frequency = <0>; /* Filled in by U-Boot */ + current-speed = <115200>; + interrupt-parent = <&UIC0>; + interrupts = <0x0 0x4>; + }; + + UART1: serial@f0000300 { + device_type = "serial"; + compatible = "ns16550"; + reg = <0xf0000300 0x00000008>; + virtual-reg = <0xa0000300>; + clock-frequency = <0>; + current-speed = <0>; + interrupt-parent = <&UIC0>; + interrupts = <0x1 0x4>; + }; + + + UART2: serial@f0000600 { + device_type = "serial"; + compatible = "ns16550"; + reg = <0xf0000600 0x00000008>; + virtual-reg = <0xa0000600>; + clock-frequency = <0>; + current-speed = <0>; + interrupt-parent = <&UIC1>; + interrupts = <0x5 0x4>; + }; + + IIC0: i2c@f0000400 { + compatible = "ibm,iic-440spe", "ibm,iic-440gp", "ibm,iic"; + reg = <0xf0000400 0x00000014>; + interrupt-parent = <&UIC0>; + interrupts = <0x2 0x4>; + }; + + IIC1: i2c@f0000500 { + compatible = "ibm,iic-440spe", "ibm,iic-440gp", "ibm,iic"; + reg = <0xf0000500 0x00000014>; + interrupt-parent = <&UIC0>; + interrupts = <0x3 0x4>; + #address-cells = <1>; + #size-cells = <0>; + + rtc@68 { + compatible = "stm,m41t00"; + reg = <0x68>; + }; + }; + + EMAC0: ethernet@f0000800 { + linux,network-index = <0x0>; + device_type = "network"; + compatible = "ibm,emac-440spe", "ibm,emac4"; + interrupt-parent = <&UIC1>; + interrupts = <0x1c 0x4 0x1d 0x4>; + reg = <0xf0000800 0x00000074>; + local-mac-address = [000000000000]; + mal-device = <&MAL0>; + mal-tx-channel = <0>; + mal-rx-channel = <0>; + cell-index = <0>; + max-frame-size = <9000>; + rx-fifo-size = <4096>; + tx-fifo-size = <2048>; + phy-mode = "gmii"; + phy-map = <0x00000000>; + has-inverted-stacr-oc; + has-new-stacr-staopc; + }; + }; + + PCIX0: pci@c0ec00000 { + device_type = "pci"; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + compatible = "ibm,plb-pcix-440spe", "ibm,plb-pcix"; + primary; + large-inbound-windows; + enable-msi-hole; + reg = <0x0000000c 0x0ec00000 0x00000008 /* Config space access */ + 0x00000000 0x00000000 0x00000000 /* no IACK cycles */ + 0x0000000c 0x0ed00000 0x00000004 /* Special cycles */ + 0x0000000c 0x0ec80000 0x00000100 /* Internal registers */ + 0x0000000c 0x0ec80100 0x000000fc>; /* Internal messaging registers */ + + /* Outbound ranges, one memory and one IO, + * later cannot be changed + */ + ranges = <0x02000000 0x00000000 0x80000000 0x0000000d 0x80000000 0x00000000 0x80000000 + 0x01000000 0x00000000 0x00000000 0x0000000c 0x08000000 0x00000000 0x00010000>; + + /* Inbound 4GB range starting at 0 */ + dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x1 0x00000000>; + + /* This drives busses 0 to 0xf */ + bus-range = <0x0 0xf>; + + /* PCI-X interrupt (SM502) is routed to extIRQ10 (UIC1, 19) */ + interrupt-map-mask = <0x0 0x0 0x0 0x0>; + interrupt-map = <0x0 0x0 0x0 0x0 &UIC1 19 0x8>; + }; + + PCIE0: pciex@d00000000 { + device_type = "pci"; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + compatible = "ibm,plb-pciex-440spe", "ibm,plb-pciex"; + primary; + port = <0x0>; /* port number */ + reg = <0x0000000d 0x00000000 0x20000000 /* Config space access */ + 0x0000000c 0x10000000 0x00001000>; /* Registers */ + dcr-reg = <0x100 0x020>; + sdr-base = <0x300>; + + /* Outbound ranges, one memory and one IO, + * later cannot be changed + */ + ranges = <0x02000000 0x00000000 0x80000000 0x0000000e 0x00000000 0x00000000 0x80000000 + 0x01000000 0x00000000 0x00000000 0x0000000f 0x80000000 0x00000000 0x00010000>; + + /* Inbound 4GB range starting at 0 */ + dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x1 0x00000000>; + + /* This drives busses 0x10 to 0x1f */ + bus-range = <0x10 0x1f>; + + /* Legacy interrupts (note the weird polarity, the bridge seems + * to invert PCIe legacy interrupts). + * We are de-swizzling here because the numbers are actually for + * port of the root complex virtual P2P bridge. But I want + * to avoid putting a node for it in the tree, so the numbers + * below are basically de-swizzled numbers. + * The real slot is on idsel 0, so the swizzling is 1:1 + */ + interrupt-map-mask = <0x0 0x0 0x0 0x7>; + interrupt-map = < + 0x0 0x0 0x0 0x1 &UIC3 0x0 0x4 /* swizzled int A */ + 0x0 0x0 0x0 0x2 &UIC3 0x1 0x4 /* swizzled int B */ + 0x0 0x0 0x0 0x3 &UIC3 0x2 0x4 /* swizzled int C */ + 0x0 0x0 0x0 0x4 &UIC3 0x3 0x4 /* swizzled int D */>; + }; + + PCIE1: pciex@d20000000 { + device_type = "pci"; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + compatible = "ibm,plb-pciex-440spe", "ibm,plb-pciex"; + primary; + port = <0x1>; /* port number */ + reg = <0x0000000d 0x20000000 0x20000000 /* Config space access */ + 0x0000000c 0x10001000 0x00001000>; /* Registers */ + dcr-reg = <0x120 0x020>; + sdr-base = <0x340>; + + /* Outbound ranges, one memory and one IO, + * later cannot be changed + */ + ranges = <0x02000000 0x00000000 0x80000000 0x0000000e 0x80000000 0x00000000 0x80000000 + 0x01000000 0x00000000 0x00000000 0x0000000f 0x80010000 0x00000000 0x00010000>; + + /* Inbound 4GB range starting at 0 */ + dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x1 0x00000000>; + + /* This drives busses 0x20 to 0x2f */ + bus-range = <0x20 0x2f>; + + /* Legacy interrupts (note the weird polarity, the bridge seems + * to invert PCIe legacy interrupts). + * We are de-swizzling here because the numbers are actually for + * port of the root complex virtual P2P bridge. But I want + * to avoid putting a node for it in the tree, so the numbers + * below are basically de-swizzled numbers. + * The real slot is on idsel 0, so the swizzling is 1:1 + */ + interrupt-map-mask = <0x0 0x0 0x0 0x7>; + interrupt-map = < + 0x0 0x0 0x0 0x1 &UIC3 0x4 0x4 /* swizzled int A */ + 0x0 0x0 0x0 0x2 &UIC3 0x5 0x4 /* swizzled int B */ + 0x0 0x0 0x0 0x3 &UIC3 0x6 0x4 /* swizzled int C */ + 0x0 0x0 0x0 0x4 &UIC3 0x7 0x4 /* swizzled int D */>; + }; + + I2O: i2o@400100000 { + compatible = "ibm,i2o-440spe"; + reg = <0x00000004 0x00100000 0x100>; + dcr-reg = <0x060 0x020>; + }; + + DMA0: dma0@400100100 { + compatible = "ibm,dma-440spe"; + cell-index = <0>; + reg = <0x00000004 0x00100100 0x100>; + dcr-reg = <0x060 0x020>; + interrupt-parent = <&DMA0>; + interrupts = <0 1>; + #interrupt-cells = <1>; + #address-cells = <0>; + #size-cells = <0>; + interrupt-map = < + 0 &UIC0 0x14 4 + 1 &UIC1 0x16 4>; + }; + + DMA1: dma1@400100200 { + compatible = "ibm,dma-440spe"; + cell-index = <1>; + reg = <0x00000004 0x00100200 0x100>; + dcr-reg = <0x060 0x020>; + interrupt-parent = <&DMA1>; + interrupts = <0 1>; + #interrupt-cells = <1>; + #address-cells = <0>; + #size-cells = <0>; + interrupt-map = < + 0 &UIC0 0x16 4 + 1 &UIC1 0x16 4>; + }; + + xor-accel@400200000 { + compatible = "amcc,xor-accelerator"; + reg = <0x00000004 0x00200000 0x400>; + interrupt-parent = <&UIC1>; + interrupts = <0x1f 4>; + }; + }; + + chosen { + linux,stdout-path = "/plb/opb/serial@f0000200"; + }; +}; diff --git a/arch/powerpc/boot/dts/include/dt-bindings b/arch/powerpc/boot/dts/include/dt-bindings new file mode 120000 index 000000000..08c00e497 --- /dev/null +++ b/arch/powerpc/boot/dts/include/dt-bindings @@ -0,0 +1 @@ +../../../../../include/dt-bindings
\ No newline at end of file diff --git a/arch/powerpc/boot/dts/iss4xx-mpic.dts b/arch/powerpc/boot/dts/iss4xx-mpic.dts new file mode 100644 index 000000000..23e9d9b7e --- /dev/null +++ b/arch/powerpc/boot/dts/iss4xx-mpic.dts @@ -0,0 +1,155 @@ +/* + * Device Tree Source for IBM Embedded PPC 476 Platform + * + * Copyright 2010 Torez Smith, IBM Corporation. + * + * Based on earlier code: + * Copyright (c) 2006, 2007 IBM Corp. + * Josh Boyer <jwboyer@linux.vnet.ibm.com>, David Gibson <dwg@au1.ibm.com> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without + * any warranty of any kind, whether express or implied. + */ + +/dts-v1/; + +/memreserve/ 0x01f00000 0x00100000; + +/ { + #address-cells = <2>; + #size-cells = <1>; + model = "ibm,iss-4xx"; + compatible = "ibm,iss-4xx"; + dcr-parent = <&{/cpus/cpu@0}>; + + aliases { + serial0 = &UART0; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu@0 { + device_type = "cpu"; + model = "PowerPC,4xx"; // real CPU changed in sim + reg = <0>; + clock-frequency = <100000000>; // 100Mhz :-) + timebase-frequency = <100000000>; + i-cache-line-size = <32>; + d-cache-line-size = <32>; + i-cache-size = <32768>; + d-cache-size = <32768>; + dcr-controller; + dcr-access-method = "native"; + status = "ok"; + }; + cpu@1 { + device_type = "cpu"; + model = "PowerPC,4xx"; // real CPU changed in sim + reg = <1>; + clock-frequency = <100000000>; // 100Mhz :-) + timebase-frequency = <100000000>; + i-cache-line-size = <32>; + d-cache-line-size = <32>; + i-cache-size = <32768>; + d-cache-size = <32768>; + dcr-controller; + dcr-access-method = "native"; + status = "disabled"; + enable-method = "spin-table"; + cpu-release-addr = <0 0x01f00100>; + }; + cpu@2 { + device_type = "cpu"; + model = "PowerPC,4xx"; // real CPU changed in sim + reg = <2>; + clock-frequency = <100000000>; // 100Mhz :-) + timebase-frequency = <100000000>; + i-cache-line-size = <32>; + d-cache-line-size = <32>; + i-cache-size = <32768>; + d-cache-size = <32768>; + dcr-controller; + dcr-access-method = "native"; + status = "disabled"; + enable-method = "spin-table"; + cpu-release-addr = <0 0x01f00200>; + }; + cpu@3 { + device_type = "cpu"; + model = "PowerPC,4xx"; // real CPU changed in sim + reg = <3>; + clock-frequency = <100000000>; // 100Mhz :-) + timebase-frequency = <100000000>; + i-cache-line-size = <32>; + d-cache-line-size = <32>; + i-cache-size = <32768>; + d-cache-size = <32768>; + dcr-controller; + dcr-access-method = "native"; + status = "disabled"; + enable-method = "spin-table"; + cpu-release-addr = <0 0x01f00300>; + }; + }; + + memory { + device_type = "memory"; + reg = <0x00000000 0x00000000 0x00000000>; // Filled in by zImage + + }; + + MPIC: interrupt-controller { + compatible = "chrp,open-pic"; + interrupt-controller; + dcr-reg = <0xffc00000 0x00030000>; + #address-cells = <0>; + #size-cells = <0>; + #interrupt-cells = <2>; + + }; + + plb { + compatible = "ibm,plb-4xx", "ibm,plb4"; /* Could be PLB6, doesn't matter */ + #address-cells = <2>; + #size-cells = <1>; + ranges; + clock-frequency = <0>; // Filled in by zImage + + POB0: opb { + compatible = "ibm,opb-4xx", "ibm,opb"; + #address-cells = <1>; + #size-cells = <1>; + /* Wish there was a nicer way of specifying a full 32-bit + range */ + ranges = <0x00000000 0x00000001 0x00000000 0x80000000 + 0x80000000 0x00000001 0x80000000 0x80000000>; + clock-frequency = <0>; // Filled in by zImage + UART0: serial@40000200 { + device_type = "serial"; + compatible = "ns16550a"; + reg = <0x40000200 0x00000008>; + virtual-reg = <0xe0000200>; + clock-frequency = <11059200>; + current-speed = <115200>; + interrupt-parent = <&MPIC>; + interrupts = <0x0 0x2>; + }; + }; + }; + + nvrtc { + compatible = "ds1743-nvram", "ds1743", "rtc-ds1743"; + reg = <0 0xEF703000 0x2000>; + }; + iss-block { + compatible = "ibm,iss-sim-block-device"; + reg = <0 0xEF701000 0x1000>; + }; + + chosen { + linux,stdout-path = "/plb/opb/serial@40000200"; + }; +}; diff --git a/arch/powerpc/boot/dts/iss4xx.dts b/arch/powerpc/boot/dts/iss4xx.dts new file mode 100644 index 000000000..4ff6555c8 --- /dev/null +++ b/arch/powerpc/boot/dts/iss4xx.dts @@ -0,0 +1,116 @@ +/* + * Device Tree Source for IBM Embedded PPC 476 Platform + * + * Copyright 2010 Torez Smith, IBM Corporation. + * + * Based on earlier code: + * Copyright (c) 2006, 2007 IBM Corp. + * Josh Boyer <jwboyer@linux.vnet.ibm.com>, David Gibson <dwg@au1.ibm.com> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without + * any warranty of any kind, whether express or implied. + */ + +/dts-v1/; + +/ { + #address-cells = <2>; + #size-cells = <1>; + model = "ibm,iss-4xx"; + compatible = "ibm,iss-4xx"; + dcr-parent = <&{/cpus/cpu@0}>; + + aliases { + serial0 = &UART0; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu@0 { + device_type = "cpu"; + model = "PowerPC,4xx"; // real CPU changed in sim + reg = <0x00000000>; + clock-frequency = <100000000>; // 100Mhz :-) + timebase-frequency = <100000000>; + i-cache-line-size = <32>; // may need fixup in sim + d-cache-line-size = <32>; // may need fixup in sim + i-cache-size = <32768>; /* may need fixup in sim */ + d-cache-size = <32768>; /* may need fixup in sim */ + dcr-controller; + dcr-access-method = "native"; + }; + }; + + memory { + device_type = "memory"; + reg = <0x00000000 0x00000000 0x00000000>; // Filled in by zImage + }; + + UIC0: interrupt-controller0 { + compatible = "ibm,uic-4xx", "ibm,uic"; + interrupt-controller; + cell-index = <0>; + dcr-reg = <0x0c0 0x009>; + #address-cells = <0>; + #size-cells = <0>; + #interrupt-cells = <2>; + + }; + + UIC1: interrupt-controller1 { + compatible = "ibm,uic-4xx", "ibm,uic"; + interrupt-controller; + cell-index = <1>; + dcr-reg = <0x0d0 0x009>; + #address-cells = <0>; + #size-cells = <0>; + #interrupt-cells = <2>; + interrupts = <0x1e 0x4 0x1f 0x4>; /* cascade */ + interrupt-parent = <&UIC0>; + }; + + plb { + compatible = "ibm,plb-4xx", "ibm,plb4"; /* Could be PLB6, doesn't matter */ + #address-cells = <2>; + #size-cells = <1>; + ranges; + clock-frequency = <0>; // Filled in by zImage + + POB0: opb { + compatible = "ibm,opb-4xx", "ibm,opb"; + #address-cells = <1>; + #size-cells = <1>; + /* Wish there was a nicer way of specifying a full 32-bit + range */ + ranges = <0x00000000 0x00000001 0x00000000 0x80000000 + 0x80000000 0x00000001 0x80000000 0x80000000>; + clock-frequency = <0>; // Filled in by zImage + UART0: serial@40000200 { + device_type = "serial"; + compatible = "ns16550a"; + reg = <0x40000200 0x00000008>; + virtual-reg = <0xe0000200>; + clock-frequency = <11059200>; + current-speed = <115200>; + interrupt-parent = <&UIC0>; + interrupts = <0x0 0x4>; + }; + }; + }; + + nvrtc { + compatible = "ds1743-nvram", "ds1743", "rtc-ds1743"; + reg = <0 0xEF703000 0x2000>; + }; + iss-block { + compatible = "ibm,iss-sim-block-device"; + reg = <0 0xEF701000 0x1000>; + }; + + chosen { + linux,stdout-path = "/plb/opb/serial@40000200"; + }; +}; diff --git a/arch/powerpc/boot/dts/katmai.dts b/arch/powerpc/boot/dts/katmai.dts new file mode 100644 index 000000000..f913dbe25 --- /dev/null +++ b/arch/powerpc/boot/dts/katmai.dts @@ -0,0 +1,510 @@ +/* + * Device Tree Source for AMCC Katmai eval board + * + * Copyright (c) 2006, 2007 IBM Corp. + * Benjamin Herrenschmidt <benh@kernel.crashing.org> + * + * Copyright (c) 2006, 2007 IBM Corp. + * Josh Boyer <jwboyer@linux.vnet.ibm.com> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without + * any warranty of any kind, whether express or implied. + */ + +/dts-v1/; + +/ { + #address-cells = <2>; + #size-cells = <2>; + model = "amcc,katmai"; + compatible = "amcc,katmai"; + dcr-parent = <&{/cpus/cpu@0}>; + + aliases { + ethernet0 = &EMAC0; + serial0 = &UART0; + serial1 = &UART1; + serial2 = &UART2; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu@0 { + device_type = "cpu"; + model = "PowerPC,440SPe"; + reg = <0x00000000>; + clock-frequency = <0>; /* Filled in by zImage */ + timebase-frequency = <0>; /* Filled in by zImage */ + i-cache-line-size = <32>; + d-cache-line-size = <32>; + i-cache-size = <32768>; + d-cache-size = <32768>; + dcr-controller; + dcr-access-method = "native"; + reset-type = <2>; /* Use chip-reset */ + }; + }; + + memory { + device_type = "memory"; + reg = <0x0 0x00000000 0x0 0x00000000>; /* Filled in by U-Boot */ + }; + + UIC0: interrupt-controller0 { + compatible = "ibm,uic-440spe","ibm,uic"; + interrupt-controller; + cell-index = <0>; + dcr-reg = <0x0c0 0x009>; + #address-cells = <0>; + #size-cells = <0>; + #interrupt-cells = <2>; + }; + + UIC1: interrupt-controller1 { + compatible = "ibm,uic-440spe","ibm,uic"; + interrupt-controller; + cell-index = <1>; + dcr-reg = <0x0d0 0x009>; + #address-cells = <0>; + #size-cells = <0>; + #interrupt-cells = <2>; + interrupts = <0x1e 0x4 0x1f 0x4>; /* cascade */ + interrupt-parent = <&UIC0>; + }; + + UIC2: interrupt-controller2 { + compatible = "ibm,uic-440spe","ibm,uic"; + interrupt-controller; + cell-index = <2>; + dcr-reg = <0x0e0 0x009>; + #address-cells = <0>; + #size-cells = <0>; + #interrupt-cells = <2>; + interrupts = <0xa 0x4 0xb 0x4>; /* cascade */ + interrupt-parent = <&UIC0>; + }; + + UIC3: interrupt-controller3 { + compatible = "ibm,uic-440spe","ibm,uic"; + interrupt-controller; + cell-index = <3>; + dcr-reg = <0x0f0 0x009>; + #address-cells = <0>; + #size-cells = <0>; + #interrupt-cells = <2>; + interrupts = <0x10 0x4 0x11 0x4>; /* cascade */ + interrupt-parent = <&UIC0>; + }; + + SDR0: sdr { + compatible = "ibm,sdr-440spe"; + dcr-reg = <0x00e 0x002>; + }; + + CPR0: cpr { + compatible = "ibm,cpr-440spe"; + dcr-reg = <0x00c 0x002>; + }; + + MQ0: mq { + compatible = "ibm,mq-440spe"; + dcr-reg = <0x040 0x020>; + }; + + plb { + compatible = "ibm,plb-440spe", "ibm,plb-440gp", "ibm,plb4"; + #address-cells = <2>; + #size-cells = <1>; + /* addr-child addr-parent size */ + ranges = <0x4 0x00100000 0x4 0x00100000 0x00001000 + 0x4 0x00200000 0x4 0x00200000 0x00000400 + 0x4 0xe0000000 0x4 0xe0000000 0x20000000 + 0xc 0x00000000 0xc 0x00000000 0x20000000 + 0xd 0x00000000 0xd 0x00000000 0x80000000 + 0xd 0x80000000 0xd 0x80000000 0x80000000 + 0xe 0x00000000 0xe 0x00000000 0x80000000 + 0xe 0x80000000 0xe 0x80000000 0x80000000 + 0xf 0x00000000 0xf 0x00000000 0x80000000 + 0xf 0x80000000 0xf 0x80000000 0x80000000>; + clock-frequency = <0>; /* Filled in by zImage */ + + SDRAM0: sdram { + compatible = "ibm,sdram-440spe", "ibm,sdram-405gp"; + dcr-reg = <0x010 0x002>; + }; + + MAL0: mcmal { + compatible = "ibm,mcmal-440spe", "ibm,mcmal2"; + dcr-reg = <0x180 0x062>; + num-tx-chans = <2>; + num-rx-chans = <1>; + interrupt-parent = <&MAL0>; + interrupts = <0x0 0x1 0x2 0x3 0x4>; + #interrupt-cells = <1>; + #address-cells = <0>; + #size-cells = <0>; + interrupt-map = </*TXEOB*/ 0x0 &UIC1 0x6 0x4 + /*RXEOB*/ 0x1 &UIC1 0x7 0x4 + /*SERR*/ 0x2 &UIC1 0x1 0x4 + /*TXDE*/ 0x3 &UIC1 0x2 0x4 + /*RXDE*/ 0x4 &UIC1 0x3 0x4>; + }; + + POB0: opb { + compatible = "ibm,opb-440spe", "ibm,opb-440gp", "ibm,opb"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0xe0000000 0x00000004 0xe0000000 0x20000000>; + clock-frequency = <0>; /* Filled in by zImage */ + + EBC0: ebc { + compatible = "ibm,ebc-440spe", "ibm,ebc-440gp", "ibm,ebc"; + dcr-reg = <0x012 0x002>; + #address-cells = <2>; + #size-cells = <1>; + clock-frequency = <0>; /* Filled in by zImage */ + /* ranges property is supplied by U-Boot */ + interrupts = <0x5 0x1>; + interrupt-parent = <&UIC1>; + + nor_flash@0,0 { + compatible = "cfi-flash"; + bank-width = <2>; + reg = <0x00000000 0x00000000 0x01000000>; + #address-cells = <1>; + #size-cells = <1>; + partition@0 { + label = "kernel"; + reg = <0x00000000 0x001e0000>; + }; + partition@1e0000 { + label = "dtb"; + reg = <0x001e0000 0x00020000>; + }; + partition@200000 { + label = "root"; + reg = <0x00200000 0x00200000>; + }; + partition@400000 { + label = "user"; + reg = <0x00400000 0x00b60000>; + }; + partition@f60000 { + label = "env"; + reg = <0x00f60000 0x00040000>; + }; + partition@fa0000 { + label = "u-boot"; + reg = <0x00fa0000 0x00060000>; + }; + }; + }; + + UART0: serial@f0000200 { + device_type = "serial"; + compatible = "ns16550"; + reg = <0xf0000200 0x00000008>; + virtual-reg = <0xa0000200>; + clock-frequency = <0>; /* Filled in by zImage */ + current-speed = <115200>; + interrupt-parent = <&UIC0>; + interrupts = <0x0 0x4>; + }; + + UART1: serial@f0000300 { + device_type = "serial"; + compatible = "ns16550"; + reg = <0xf0000300 0x00000008>; + virtual-reg = <0xa0000300>; + clock-frequency = <0>; + current-speed = <0>; + interrupt-parent = <&UIC0>; + interrupts = <0x1 0x4>; + }; + + + UART2: serial@f0000600 { + device_type = "serial"; + compatible = "ns16550"; + reg = <0xf0000600 0x00000008>; + virtual-reg = <0xa0000600>; + clock-frequency = <0>; + current-speed = <0>; + interrupt-parent = <&UIC1>; + interrupts = <0x5 0x4>; + }; + + IIC0: i2c@f0000400 { + compatible = "ibm,iic-440spe", "ibm,iic-440gp", "ibm,iic"; + reg = <0xf0000400 0x00000014>; + interrupt-parent = <&UIC0>; + interrupts = <0x2 0x4>; + }; + + IIC1: i2c@f0000500 { + compatible = "ibm,iic-440spe", "ibm,iic-440gp", "ibm,iic"; + reg = <0xf0000500 0x00000014>; + interrupt-parent = <&UIC0>; + interrupts = <0x3 0x4>; + }; + + EMAC0: ethernet@f0000800 { + linux,network-index = <0x0>; + device_type = "network"; + compatible = "ibm,emac-440spe", "ibm,emac4"; + interrupt-parent = <&UIC1>; + interrupts = <0x1c 0x4 0x1d 0x4>; + reg = <0xf0000800 0x00000074>; + local-mac-address = [000000000000]; + mal-device = <&MAL0>; + mal-tx-channel = <0>; + mal-rx-channel = <0>; + cell-index = <0>; + max-frame-size = <9000>; + rx-fifo-size = <4096>; + tx-fifo-size = <2048>; + phy-mode = "gmii"; + phy-map = <0x00000000>; + has-inverted-stacr-oc; + has-new-stacr-staopc; + }; + }; + + PCIX0: pci@c0ec00000 { + device_type = "pci"; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + compatible = "ibm,plb-pcix-440spe", "ibm,plb-pcix"; + primary; + large-inbound-windows; + enable-msi-hole; + reg = <0x0000000c 0x0ec00000 0x00000008 /* Config space access */ + 0x00000000 0x00000000 0x00000000 /* no IACK cycles */ + 0x0000000c 0x0ed00000 0x00000004 /* Special cycles */ + 0x0000000c 0x0ec80000 0x00000100 /* Internal registers */ + 0x0000000c 0x0ec80100 0x000000fc>; /* Internal messaging registers */ + + /* Outbound ranges, one memory and one IO, + * later cannot be changed + */ + ranges = <0x02000000 0x00000000 0x80000000 0x0000000d 0x80000000 0x00000000 0x80000000 + 0x01000000 0x00000000 0x00000000 0x0000000c 0x08000000 0x00000000 0x00010000>; + + /* Inbound 4GB range starting at 0 */ + dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x1 0x00000000>; + + /* This drives busses 0 to 0xf */ + bus-range = <0x0 0xf>; + + /* + * On Katmai, the following PCI-X interrupts signals + * have to be enabled via jumpers (only INTA is + * enabled per default): + * + * INTB: J3: 1-2 + * INTC: J2: 1-2 + * INTD: J1: 1-2 + */ + interrupt-map-mask = <0xf800 0x0 0x0 0x7>; + interrupt-map = < + /* IDSEL 1 */ + 0x800 0x0 0x0 0x1 &UIC1 0x14 0x8 + 0x800 0x0 0x0 0x2 &UIC1 0x13 0x8 + 0x800 0x0 0x0 0x3 &UIC1 0x12 0x8 + 0x800 0x0 0x0 0x4 &UIC1 0x11 0x8 + >; + }; + + PCIE0: pciex@d00000000 { + device_type = "pci"; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + compatible = "ibm,plb-pciex-440spe", "ibm,plb-pciex"; + primary; + port = <0x0>; /* port number */ + reg = <0x0000000d 0x00000000 0x20000000 /* Config space access */ + 0x0000000c 0x10000000 0x00001000>; /* Registers */ + dcr-reg = <0x100 0x020>; + sdr-base = <0x300>; + + /* Outbound ranges, one memory and one IO, + * later cannot be changed + */ + ranges = <0x02000000 0x00000000 0x80000000 0x0000000e 0x00000000 0x00000000 0x80000000 + 0x01000000 0x00000000 0x00000000 0x0000000f 0x80000000 0x00000000 0x00010000>; + + /* Inbound 4GB range starting at 0 */ + dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x1 0x00000000>; + + /* This drives busses 0x10 to 0x1f */ + bus-range = <0x10 0x1f>; + + /* Legacy interrupts (note the weird polarity, the bridge seems + * to invert PCIe legacy interrupts). + * We are de-swizzling here because the numbers are actually for + * port of the root complex virtual P2P bridge. But I want + * to avoid putting a node for it in the tree, so the numbers + * below are basically de-swizzled numbers. + * The real slot is on idsel 0, so the swizzling is 1:1 + */ + interrupt-map-mask = <0x0 0x0 0x0 0x7>; + interrupt-map = < + 0x0 0x0 0x0 0x1 &UIC3 0x0 0x4 /* swizzled int A */ + 0x0 0x0 0x0 0x2 &UIC3 0x1 0x4 /* swizzled int B */ + 0x0 0x0 0x0 0x3 &UIC3 0x2 0x4 /* swizzled int C */ + 0x0 0x0 0x0 0x4 &UIC3 0x3 0x4 /* swizzled int D */>; + }; + + PCIE1: pciex@d20000000 { + device_type = "pci"; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + compatible = "ibm,plb-pciex-440spe", "ibm,plb-pciex"; + primary; + port = <0x1>; /* port number */ + reg = <0x0000000d 0x20000000 0x20000000 /* Config space access */ + 0x0000000c 0x10001000 0x00001000>; /* Registers */ + dcr-reg = <0x120 0x020>; + sdr-base = <0x340>; + + /* Outbound ranges, one memory and one IO, + * later cannot be changed + */ + ranges = <0x02000000 0x00000000 0x80000000 0x0000000e 0x80000000 0x00000000 0x80000000 + 0x01000000 0x00000000 0x00000000 0x0000000f 0x80010000 0x00000000 0x00010000>; + + /* Inbound 4GB range starting at 0 */ + dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x1 0x00000000>; + + /* This drives busses 0x20 to 0x2f */ + bus-range = <0x20 0x2f>; + + /* Legacy interrupts (note the weird polarity, the bridge seems + * to invert PCIe legacy interrupts). + * We are de-swizzling here because the numbers are actually for + * port of the root complex virtual P2P bridge. But I want + * to avoid putting a node for it in the tree, so the numbers + * below are basically de-swizzled numbers. + * The real slot is on idsel 0, so the swizzling is 1:1 + */ + interrupt-map-mask = <0x0 0x0 0x0 0x7>; + interrupt-map = < + 0x0 0x0 0x0 0x1 &UIC3 0x4 0x4 /* swizzled int A */ + 0x0 0x0 0x0 0x2 &UIC3 0x5 0x4 /* swizzled int B */ + 0x0 0x0 0x0 0x3 &UIC3 0x6 0x4 /* swizzled int C */ + 0x0 0x0 0x0 0x4 &UIC3 0x7 0x4 /* swizzled int D */>; + }; + + PCIE2: pciex@d40000000 { + device_type = "pci"; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + compatible = "ibm,plb-pciex-440spe", "ibm,plb-pciex"; + primary; + port = <0x2>; /* port number */ + reg = <0x0000000d 0x40000000 0x20000000 /* Config space access */ + 0x0000000c 0x10002000 0x00001000>; /* Registers */ + dcr-reg = <0x140 0x020>; + sdr-base = <0x370>; + + /* Outbound ranges, one memory and one IO, + * later cannot be changed + */ + ranges = <0x02000000 0x00000000 0x80000000 0x0000000f 0x00000000 0x00000000 0x80000000 + 0x01000000 0x00000000 0x00000000 0x0000000f 0x80020000 0x00000000 0x00010000>; + + /* Inbound 4GB range starting at 0 */ + dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x1 0x00000000>; + + /* This drives busses 0x30 to 0x3f */ + bus-range = <0x30 0x3f>; + + /* Legacy interrupts (note the weird polarity, the bridge seems + * to invert PCIe legacy interrupts). + * We are de-swizzling here because the numbers are actually for + * port of the root complex virtual P2P bridge. But I want + * to avoid putting a node for it in the tree, so the numbers + * below are basically de-swizzled numbers. + * The real slot is on idsel 0, so the swizzling is 1:1 + */ + interrupt-map-mask = <0x0 0x0 0x0 0x7>; + interrupt-map = < + 0x0 0x0 0x0 0x1 &UIC3 0x8 0x4 /* swizzled int A */ + 0x0 0x0 0x0 0x2 &UIC3 0x9 0x4 /* swizzled int B */ + 0x0 0x0 0x0 0x3 &UIC3 0xa 0x4 /* swizzled int C */ + 0x0 0x0 0x0 0x4 &UIC3 0xb 0x4 /* swizzled int D */>; + }; + + MSI: ppc4xx-msi@400300000 { + compatible = "amcc,ppc4xx-msi", "ppc4xx-msi"; + reg = < 0x4 0x00300000 0x100>; + sdr-base = <0x3B0>; + msi-data = <0x00000000>; + msi-mask = <0x44440000>; + interrupt-count = <3>; + interrupts =<0 1 2 3>; + interrupt-parent = <&UIC0>; + #interrupt-cells = <1>; + #address-cells = <0>; + #size-cells = <0>; + interrupt-map = <0 &UIC0 0xC 1 + 1 &UIC0 0x0D 1 + 2 &UIC0 0x0E 1 + 3 &UIC0 0x0F 1>; + }; + + I2O: i2o@400100000 { + compatible = "ibm,i2o-440spe"; + reg = <0x00000004 0x00100000 0x100>; + dcr-reg = <0x060 0x020>; + }; + + DMA0: dma0@400100100 { + compatible = "ibm,dma-440spe"; + cell-index = <0>; + reg = <0x00000004 0x00100100 0x100>; + dcr-reg = <0x060 0x020>; + interrupt-parent = <&DMA0>; + interrupts = <0 1>; + #interrupt-cells = <1>; + #address-cells = <0>; + #size-cells = <0>; + interrupt-map = < + 0 &UIC0 0x14 4 + 1 &UIC1 0x16 4>; + }; + + DMA1: dma1@400100200 { + compatible = "ibm,dma-440spe"; + cell-index = <1>; + reg = <0x00000004 0x00100200 0x100>; + dcr-reg = <0x060 0x020>; + interrupt-parent = <&DMA1>; + interrupts = <0 1>; + #interrupt-cells = <1>; + #address-cells = <0>; + #size-cells = <0>; + interrupt-map = < + 0 &UIC0 0x16 4 + 1 &UIC1 0x16 4>; + }; + + xor-accel@400200000 { + compatible = "amcc,xor-accelerator"; + reg = <0x00000004 0x00200000 0x400>; + interrupt-parent = <&UIC1>; + interrupts = <0x1f 4>; + }; + }; + + chosen { + linux,stdout-path = "/plb/opb/serial@f0000200"; + }; +}; diff --git a/arch/powerpc/boot/dts/kilauea.dts b/arch/powerpc/boot/dts/kilauea.dts new file mode 100644 index 000000000..5ba7f01e2 --- /dev/null +++ b/arch/powerpc/boot/dts/kilauea.dts @@ -0,0 +1,435 @@ +/* + * Device Tree Source for AMCC Kilauea (405EX) + * + * Copyright 2007-2009 DENX Software Engineering, Stefan Roese <sr@denx.de> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without + * any warranty of any kind, whether express or implied. + */ + +/dts-v1/; + +/ { + #address-cells = <1>; + #size-cells = <1>; + model = "amcc,kilauea"; + compatible = "amcc,kilauea"; + dcr-parent = <&{/cpus/cpu@0}>; + + aliases { + ethernet0 = &EMAC0; + ethernet1 = &EMAC1; + serial0 = &UART0; + serial1 = &UART1; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu@0 { + device_type = "cpu"; + model = "PowerPC,405EX"; + reg = <0x00000000>; + clock-frequency = <0>; /* Filled in by U-Boot */ + timebase-frequency = <0>; /* Filled in by U-Boot */ + i-cache-line-size = <32>; + d-cache-line-size = <32>; + i-cache-size = <16384>; /* 16 kB */ + d-cache-size = <16384>; /* 16 kB */ + dcr-controller; + dcr-access-method = "native"; + }; + }; + + memory { + device_type = "memory"; + reg = <0x00000000 0x00000000>; /* Filled in by U-Boot */ + }; + + UIC0: interrupt-controller { + compatible = "ibm,uic-405ex", "ibm,uic"; + interrupt-controller; + cell-index = <0>; + dcr-reg = <0x0c0 0x009>; + #address-cells = <0>; + #size-cells = <0>; + #interrupt-cells = <2>; + }; + + UIC1: interrupt-controller1 { + compatible = "ibm,uic-405ex","ibm,uic"; + interrupt-controller; + cell-index = <1>; + dcr-reg = <0x0d0 0x009>; + #address-cells = <0>; + #size-cells = <0>; + #interrupt-cells = <2>; + interrupts = <0x1e 0x4 0x1f 0x4>; /* cascade */ + interrupt-parent = <&UIC0>; + }; + + UIC2: interrupt-controller2 { + compatible = "ibm,uic-405ex","ibm,uic"; + interrupt-controller; + cell-index = <2>; + dcr-reg = <0x0e0 0x009>; + #address-cells = <0>; + #size-cells = <0>; + #interrupt-cells = <2>; + interrupts = <0x1c 0x4 0x1d 0x4>; /* cascade */ + interrupt-parent = <&UIC0>; + }; + + CPM0: cpm { + compatible = "ibm,cpm"; + dcr-access-method = "native"; + dcr-reg = <0x0b0 0x003>; + unused-units = <0x00000000>; + idle-doze = <0x02000000>; + standby = <0xe3e74800>; + }; + + plb { + compatible = "ibm,plb-405ex", "ibm,plb4"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + clock-frequency = <0>; /* Filled in by U-Boot */ + + SDRAM0: memory-controller { + compatible = "ibm,sdram-405ex", "ibm,sdram-4xx-ddr2"; + dcr-reg = <0x010 0x002>; + interrupt-parent = <&UIC2>; + interrupts = <0x5 0x4 /* ECC DED Error */ + 0x6 0x4>; /* ECC SEC Error */ + }; + + CRYPTO: crypto@ef700000 { + compatible = "amcc,ppc405ex-crypto", "amcc,ppc4xx-crypto"; + reg = <0xef700000 0x80400>; + interrupt-parent = <&UIC0>; + interrupts = <0x17 0x2>; + }; + + MAL0: mcmal { + compatible = "ibm,mcmal-405ex", "ibm,mcmal2"; + dcr-reg = <0x180 0x062>; + num-tx-chans = <2>; + num-rx-chans = <2>; + interrupt-parent = <&MAL0>; + interrupts = <0x0 0x1 0x2 0x3 0x4>; + #interrupt-cells = <1>; + #address-cells = <0>; + #size-cells = <0>; + interrupt-map = </*TXEOB*/ 0x0 &UIC0 0xa 0x4 + /*RXEOB*/ 0x1 &UIC0 0xb 0x4 + /*SERR*/ 0x2 &UIC1 0x0 0x4 + /*TXDE*/ 0x3 &UIC1 0x1 0x4 + /*RXDE*/ 0x4 &UIC1 0x2 0x4>; + interrupt-map-mask = <0xffffffff>; + }; + + POB0: opb { + compatible = "ibm,opb-405ex", "ibm,opb"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x80000000 0x80000000 0x10000000 + 0xef600000 0xef600000 0x00a00000 + 0xf0000000 0xf0000000 0x10000000>; + dcr-reg = <0x0a0 0x005>; + clock-frequency = <0>; /* Filled in by U-Boot */ + + EBC0: ebc { + compatible = "ibm,ebc-405ex", "ibm,ebc"; + dcr-reg = <0x012 0x002>; + #address-cells = <2>; + #size-cells = <1>; + clock-frequency = <0>; /* Filled in by U-Boot */ + /* ranges property is supplied by U-Boot */ + interrupts = <0x5 0x1>; + interrupt-parent = <&UIC1>; + + nor_flash@0,0 { + compatible = "amd,s29gl512n", "cfi-flash"; + bank-width = <2>; + reg = <0x00000000 0x00000000 0x04000000>; + #address-cells = <1>; + #size-cells = <1>; + partition@0 { + label = "kernel"; + reg = <0x00000000 0x001e0000>; + }; + partition@1e0000 { + label = "dtb"; + reg = <0x001e0000 0x00020000>; + }; + partition@200000 { + label = "root"; + reg = <0x00200000 0x00200000>; + }; + partition@400000 { + label = "user"; + reg = <0x00400000 0x03b60000>; + }; + partition@3f60000 { + label = "env"; + reg = <0x03f60000 0x00040000>; + }; + partition@3fa0000 { + label = "u-boot"; + reg = <0x03fa0000 0x00060000>; + }; + }; + + ndfc@1,0 { + compatible = "ibm,ndfc"; + reg = <0x00000001 0x00000000 0x00002000>; + ccr = <0x00001000>; + bank-settings = <0x80002222>; + #address-cells = <1>; + #size-cells = <1>; + + nand { + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "u-boot"; + reg = <0x00000000 0x00100000>; + }; + partition@100000 { + label = "user"; + reg = <0x00000000 0x03f00000>; + }; + }; + }; + }; + + UART0: serial@ef600200 { + device_type = "serial"; + compatible = "ns16550"; + reg = <0xef600200 0x00000008>; + virtual-reg = <0xef600200>; + clock-frequency = <0>; /* Filled in by U-Boot */ + current-speed = <0>; + interrupt-parent = <&UIC0>; + interrupts = <0x1a 0x4>; + }; + + UART1: serial@ef600300 { + device_type = "serial"; + compatible = "ns16550"; + reg = <0xef600300 0x00000008>; + virtual-reg = <0xef600300>; + clock-frequency = <0>; /* Filled in by U-Boot */ + current-speed = <0>; + interrupt-parent = <&UIC0>; + interrupts = <0x1 0x4>; + }; + + IIC0: i2c@ef600400 { + compatible = "ibm,iic-405ex", "ibm,iic"; + reg = <0xef600400 0x00000014>; + interrupt-parent = <&UIC0>; + interrupts = <0x2 0x4>; + #address-cells = <1>; + #size-cells = <0>; + + rtc@68 { + compatible = "dallas,ds1338"; + reg = <0x68>; + }; + + dtt@48 { + compatible = "dallas,ds1775"; + reg = <0x48>; + }; + }; + + IIC1: i2c@ef600500 { + compatible = "ibm,iic-405ex", "ibm,iic"; + reg = <0xef600500 0x00000014>; + interrupt-parent = <&UIC0>; + interrupts = <0x7 0x4>; + }; + + RGMII0: emac-rgmii@ef600b00 { + compatible = "ibm,rgmii-405ex", "ibm,rgmii"; + reg = <0xef600b00 0x00000104>; + has-mdio; + }; + + EMAC0: ethernet@ef600900 { + linux,network-index = <0x0>; + device_type = "network"; + compatible = "ibm,emac-405ex", "ibm,emac4sync"; + interrupt-parent = <&EMAC0>; + interrupts = <0x0 0x1>; + #interrupt-cells = <1>; + #address-cells = <0>; + #size-cells = <0>; + interrupt-map = </*Status*/ 0x0 &UIC0 0x18 0x4 + /*Wake*/ 0x1 &UIC1 0x1d 0x4>; + reg = <0xef600900 0x000000c4>; + local-mac-address = [000000000000]; /* Filled in by U-Boot */ + mal-device = <&MAL0>; + mal-tx-channel = <0>; + mal-rx-channel = <0>; + cell-index = <0>; + max-frame-size = <9000>; + rx-fifo-size = <4096>; + tx-fifo-size = <2048>; + rx-fifo-size-gige = <16384>; + tx-fifo-size-gige = <16384>; + phy-mode = "rgmii"; + phy-map = <0x00000000>; + rgmii-device = <&RGMII0>; + rgmii-channel = <0>; + has-inverted-stacr-oc; + has-new-stacr-staopc; + }; + + EMAC1: ethernet@ef600a00 { + linux,network-index = <0x1>; + device_type = "network"; + compatible = "ibm,emac-405ex", "ibm,emac4sync"; + interrupt-parent = <&EMAC1>; + interrupts = <0x0 0x1>; + #interrupt-cells = <1>; + #address-cells = <0>; + #size-cells = <0>; + interrupt-map = </*Status*/ 0x0 &UIC0 0x19 0x4 + /*Wake*/ 0x1 &UIC1 0x1f 0x4>; + reg = <0xef600a00 0x000000c4>; + local-mac-address = [000000000000]; /* Filled in by U-Boot */ + mal-device = <&MAL0>; + mal-tx-channel = <1>; + mal-rx-channel = <1>; + cell-index = <1>; + max-frame-size = <9000>; + rx-fifo-size = <4096>; + tx-fifo-size = <2048>; + rx-fifo-size-gige = <16384>; + tx-fifo-size-gige = <16384>; + phy-mode = "rgmii"; + phy-map = <0x00000000>; + rgmii-device = <&RGMII0>; + rgmii-channel = <1>; + has-inverted-stacr-oc; + has-new-stacr-staopc; + }; + }; + + PCIE0: pciex@0a0000000 { + device_type = "pci"; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + compatible = "ibm,plb-pciex-405ex", "ibm,plb-pciex"; + primary; + port = <0x0>; /* port number */ + reg = <0xa0000000 0x20000000 /* Config space access */ + 0xef000000 0x00001000>; /* Registers */ + dcr-reg = <0x040 0x020>; + sdr-base = <0x400>; + + /* Outbound ranges, one memory and one IO, + * later cannot be changed + */ + ranges = <0x02000000 0x00000000 0x80000000 0x90000000 0x00000000 0x08000000 + 0x01000000 0x00000000 0x00000000 0xe0000000 0x00000000 0x00010000>; + + /* Inbound 2GB range starting at 0 */ + dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x80000000>; + + /* This drives busses 0x00 to 0x3f */ + bus-range = <0x0 0x3f>; + + /* Legacy interrupts (note the weird polarity, the bridge seems + * to invert PCIe legacy interrupts). + * We are de-swizzling here because the numbers are actually for + * port of the root complex virtual P2P bridge. But I want + * to avoid putting a node for it in the tree, so the numbers + * below are basically de-swizzled numbers. + * The real slot is on idsel 0, so the swizzling is 1:1 + */ + interrupt-map-mask = <0x0 0x0 0x0 0x7>; + interrupt-map = < + 0x0 0x0 0x0 0x1 &UIC2 0x0 0x4 /* swizzled int A */ + 0x0 0x0 0x0 0x2 &UIC2 0x1 0x4 /* swizzled int B */ + 0x0 0x0 0x0 0x3 &UIC2 0x2 0x4 /* swizzled int C */ + 0x0 0x0 0x0 0x4 &UIC2 0x3 0x4 /* swizzled int D */>; + }; + + PCIE1: pciex@0c0000000 { + device_type = "pci"; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + compatible = "ibm,plb-pciex-405ex", "ibm,plb-pciex"; + primary; + port = <0x1>; /* port number */ + reg = <0xc0000000 0x20000000 /* Config space access */ + 0xef001000 0x00001000>; /* Registers */ + dcr-reg = <0x060 0x020>; + sdr-base = <0x440>; + + /* Outbound ranges, one memory and one IO, + * later cannot be changed + */ + ranges = <0x02000000 0x00000000 0x80000000 0x98000000 0x00000000 0x08000000 + 0x01000000 0x00000000 0x00000000 0xe0010000 0x00000000 0x00010000>; + + /* Inbound 2GB range starting at 0 */ + dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x80000000>; + + /* This drives busses 0x40 to 0x7f */ + bus-range = <0x40 0x7f>; + + /* Legacy interrupts (note the weird polarity, the bridge seems + * to invert PCIe legacy interrupts). + * We are de-swizzling here because the numbers are actually for + * port of the root complex virtual P2P bridge. But I want + * to avoid putting a node for it in the tree, so the numbers + * below are basically de-swizzled numbers. + * The real slot is on idsel 0, so the swizzling is 1:1 + */ + interrupt-map-mask = <0x0 0x0 0x0 0x7>; + interrupt-map = < + 0x0 0x0 0x0 0x1 &UIC2 0xb 0x4 /* swizzled int A */ + 0x0 0x0 0x0 0x2 &UIC2 0xc 0x4 /* swizzled int B */ + 0x0 0x0 0x0 0x3 &UIC2 0xd 0x4 /* swizzled int C */ + 0x0 0x0 0x0 0x4 &UIC2 0xe 0x4 /* swizzled int D */>; + }; + + MSI: ppc4xx-msi@C10000000 { + compatible = "amcc,ppc4xx-msi", "ppc4xx-msi"; + reg = <0xEF620000 0x100>; + sdr-base = <0x4B0>; + msi-data = <0x00000000>; + msi-mask = <0x44440000>; + interrupt-count = <12>; + interrupts = <0 1 2 3 4 5 6 7 8 9 0xA 0xB 0xC 0xD>; + interrupt-parent = <&UIC2>; + #interrupt-cells = <1>; + #address-cells = <0>; + #size-cells = <0>; + interrupt-map = <0 &UIC2 0x10 1 + 1 &UIC2 0x11 1 + 2 &UIC2 0x12 1 + 2 &UIC2 0x13 1 + 2 &UIC2 0x14 1 + 2 &UIC2 0x15 1 + 2 &UIC2 0x16 1 + 2 &UIC2 0x17 1 + 2 &UIC2 0x18 1 + 2 &UIC2 0x19 1 + 2 &UIC2 0x1A 1 + 2 &UIC2 0x1B 1 + 2 &UIC2 0x1C 1 + 3 &UIC2 0x1D 1>; + }; + }; +}; diff --git a/arch/powerpc/boot/dts/klondike.dts b/arch/powerpc/boot/dts/klondike.dts new file mode 100644 index 000000000..8c9429033 --- /dev/null +++ b/arch/powerpc/boot/dts/klondike.dts @@ -0,0 +1,227 @@ +/* + * Device Tree for Klondike (APM8018X) board. + * + * Copyright (c) 2010, Applied Micro Circuits Corporation + * Author: Tanmay Inamdar <tinamdar@apm.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + * + */ + +/dts-v1/; + +/ { + #address-cells = <1>; + #size-cells = <1>; + model = "apm,klondike"; + compatible = "apm,klondike"; + dcr-parent = <&{/cpus/cpu@0}>; + + aliases { + ethernet0 = &EMAC0; + ethernet1 = &EMAC1; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu@0 { + device_type = "cpu"; + model = "PowerPC,apm8018x"; + reg = <0x00000000>; + clock-frequency = <300000000>; /* Filled in by U-Boot */ + timebase-frequency = <300000000>; /* Filled in by U-Boot */ + i-cache-line-size = <32>; + d-cache-line-size = <32>; + i-cache-size = <16384>; /* 16 kB */ + d-cache-size = <16384>; /* 16 kB */ + dcr-controller; + dcr-access-method = "native"; + }; + }; + + memory { + device_type = "memory"; + reg = <0x00000000 0x20000000>; /* Filled in by U-Boot */ + }; + + UIC0: interrupt-controller { + compatible = "ibm,uic"; + interrupt-controller; + cell-index = <0>; + dcr-reg = <0x0c0 0x010>; + #address-cells = <0>; + #size-cells = <0>; + #interrupt-cells = <2>; + }; + + UIC1: interrupt-controller1 { + compatible = "ibm,uic"; + interrupt-controller; + cell-index = <1>; + dcr-reg = <0x0d0 0x010>; + #address-cells = <0>; + #size-cells = <0>; + #interrupt-cells = <2>; + interrupts = <0x1e 0x4 0x1f 0x4>; /* cascade */ + interrupt-parent = <&UIC0>; + }; + + UIC2: interrupt-controller2 { + compatible = "ibm,uic"; + interrupt-controller; + cell-index = <2>; + dcr-reg = <0x0e0 0x010>; + #address-cells = <0>; + #size-cells = <0>; + #interrupt-cells = <2>; + interrupts = <0x0a 0x4 0x0b 0x4>; /* cascade */ + interrupt-parent = <&UIC0>; + }; + + UIC3: interrupt-controller3 { + compatible = "ibm,uic"; + interrupt-controller; + cell-index = <3>; + dcr-reg = <0x0f0 0x010>; + #address-cells = <0>; + #size-cells = <0>; + #interrupt-cells = <2>; + interrupts = <0x10 0x4 0x11 0x4>; /* cascade */ + interrupt-parent = <&UIC0>; + }; + + plb { + compatible = "ibm,plb4"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + clock-frequency = <0>; /* Filled in by U-Boot */ + + SDRAM0: memory-controller { + compatible = "ibm,sdram-apm8018x"; + dcr-reg = <0x010 0x002>; + }; + + MAL0: mcmal { + compatible = "ibm,mcmal2"; + dcr-reg = <0x180 0x062>; + num-tx-chans = <2>; + num-rx-chans = <16>; + #address-cells = <0>; + #size-cells = <0>; + interrupt-parent = <&UIC1>; + interrupts = </*TXEOB*/ 0x6 0x4 + /*RXEOB*/ 0x7 0x4 + /*SERR*/ 0x1 0x4 + /*TXDE*/ 0x2 0x4 + /*RXDE*/ 0x3 0x4>; + }; + + POB0: opb { + compatible = "ibm,opb"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x20000000 0x20000000 0x30000000 + 0x50000000 0x50000000 0x10000000 + 0x60000000 0x60000000 0x10000000 + 0xFE000000 0xFE000000 0x00010000>; + dcr-reg = <0x100 0x020>; + clock-frequency = <300000000>; /* Filled in by U-Boot */ + + RGMII0: emac-rgmii@400a2000 { + compatible = "ibm,rgmii"; + reg = <0x400a2000 0x00000010>; + has-mdio; + }; + + TAH0: emac-tah@400a3000 { + compatible = "ibm,tah"; + reg = <0x400a3000 0x100>; + }; + + TAH1: emac-tah@400a4000 { + compatible = "ibm,tah"; + reg = <0x400a4000 0x100>; + }; + + EMAC0: ethernet@400a0000 { + compatible = "ibm,emac4", "ibm-emac4sync"; + interrupt-parent = <&EMAC0>; + interrupts = <0x0>; + #interrupt-cells = <1>; + #address-cells = <0>; + #size-cells = <0>; + interrupt-map = </*Status*/ 0x0 &UIC0 0x13 0x4>; + reg = <0x400a0000 0x00000100>; + local-mac-address = [000000000000]; /* Filled in by U-Boot */ + mal-device = <&MAL0>; + mal-tx-channel = <0x0>; + mal-rx-channel = <0x0>; + cell-index = <0>; + max-frame-size = <9000>; + rx-fifo-size = <4096>; + tx-fifo-size = <2048>; + phy-mode = "rgmii"; + phy-address = <0x2>; + turbo = "no"; + phy-map = <0x00000000>; + rgmii-device = <&RGMII0>; + rgmii-channel = <0>; + tah-device = <&TAH0>; + tah-channel = <0>; + has-inverted-stacr-oc; + has-new-stacr-staopc; + }; + + EMAC1: ethernet@400a1000 { + compatible = "ibm,emac4", "ibm-emac4sync"; + status = "disabled"; + interrupt-parent = <&EMAC1>; + interrupts = <0x0>; + #interrupt-cells = <1>; + #address-cells = <0>; + #size-cells = <0>; + interrupt-map = </*Status*/ 0x0 &UIC0 0x14 0x4>; + reg = <0x400a1000 0x00000100>; + local-mac-address = [000000000000]; /* Filled in by U-Boot */ + mal-device = <&MAL0>; + mal-tx-channel = <1>; + mal-rx-channel = <8>; + cell-index = <1>; + max-frame-size = <9000>; + rx-fifo-size = <4096>; + tx-fifo-size = <2048>; + phy-mode = "rgmii"; + phy-address = <0x3>; + turbo = "no"; + phy-map = <0x00000000>; + rgmii-device = <&RGMII0>; + rgmii-channel = <1>; + tah-device = <&TAH1>; + tah-channel = <0>; + has-inverted-stacr-oc; + has-new-stacr-staopc; + mdio-device = <&EMAC0>; + }; + }; + }; + + chosen { + linux,stdout-path = "/plb/opb/serial@50001000"; + }; +}; diff --git a/arch/powerpc/boot/dts/kmcoge4.dts b/arch/powerpc/boot/dts/kmcoge4.dts new file mode 100644 index 000000000..97e6d11d1 --- /dev/null +++ b/arch/powerpc/boot/dts/kmcoge4.dts @@ -0,0 +1,167 @@ +/* + * Keymile kmcoge4 Device Tree Source, based on the P2041RDB DTS + * + * (C) Copyright 2014 + * Valentin Longchamp, Keymile AG, valentin.longchamp@keymile.com + * + * Copyright 2011 Freescale Semiconductor Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +/include/ "fsl/p2041si-pre.dtsi" + +/ { + model = "keymile,kmcoge4"; + compatible = "keymile,kmcoge4", "keymile,kmp204x"; + #address-cells = <2>; + #size-cells = <2>; + interrupt-parent = <&mpic>; + + memory { + device_type = "memory"; + }; + + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + bman_fbpr: bman-fbpr { + size = <0 0x1000000>; + alignment = <0 0x1000000>; + }; + }; + + dcsr: dcsr@f00000000 { + ranges = <0x00000000 0xf 0x00000000 0x01008000>; + }; + + bportals: bman-portals@ff4000000 { + ranges = <0x0 0xf 0xf4000000 0x200000>; + }; + + soc: soc@ffe000000 { + ranges = <0x00000000 0xf 0xfe000000 0x1000000>; + reg = <0xf 0xfe000000 0 0x00001000>; + spi@110000 { + flash@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "spansion,s25fl256s1"; + reg = <0>; + spi-max-frequency = <20000000>; /* input clock */ + }; + + network_clock@1 { + compatible = "zarlink,zl30343"; + reg = <1>; + spi-max-frequency = <8000000>; + }; + + flash@2 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "micron,m25p32"; + reg = <2>; + spi-max-frequency = <15000000>; + }; + }; + + i2c@119000 { + status = "disabled"; + }; + + i2c@119100 { + status = "disabled"; + }; + + usb0: usb@210000 { + status = "disabled"; + }; + + usb1: usb@211000 { + status = "disabled"; + }; + + sata@220000 { + status = "disabled"; + }; + + sata@221000 { + status = "disabled"; + }; + }; + + rio: rapidio@ffe0c0000 { + status = "disabled"; + }; + + lbc: localbus@ffe124000 { + reg = <0xf 0xfe124000 0 0x1000>; + ranges = <0 0 0xf 0xffa00000 0x00040000 /* LB 0 */ + 1 0 0xf 0xfb000000 0x00010000 /* LB 1 */ + 2 0 0xf 0xd0000000 0x10000000 /* LB 2 */ + 3 0 0xf 0xe0000000 0x10000000>; /* LB 3 */ + + nand@0,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,elbc-fcm-nand"; + reg = <0 0 0x40000>; + }; + + board-control@1,0 { + compatible = "keymile,qriox"; + reg = <1 0 0x80>; + }; + + chassis-mgmt@3,0 { + compatible = "keymile,bfticu"; + interrupt-controller; + #interrupt-cells = <2>; + reg = <3 0 0x100>; + interrupt-parent = <&mpic>; + interrupts = <6 1 0 0>; + }; + }; + + pci0: pcie@ffe200000 { + reg = <0xf 0xfe200000 0 0x1000>; + ranges = <0x02000000 0 0xe0000000 0xc 0x00000000 0x0 0x20000000 + 0x01000000 0 0x00000000 0xf 0xf8000000 0x0 0x00010000>; + pcie@0 { + ranges = <0x02000000 0 0xe0000000 + 0x02000000 0 0xe0000000 + 0 0x20000000 + + 0x01000000 0 0x00000000 + 0x01000000 0 0x00000000 + 0 0x00010000>; + }; + }; + + pci1: pcie@ffe201000 { + status = "disabled"; + }; + + pci2: pcie@ffe202000 { + reg = <0xf 0xfe202000 0 0x1000>; + ranges = <0x02000000 0 0xe0000000 0xc 0x20000000 0 0x20000000 + 0x01000000 0 0x00000000 0xf 0xf8010000 0 0x00010000>; + pcie@0 { + ranges = <0x02000000 0 0xe0000000 + 0x02000000 0 0xe0000000 + 0 0x20000000 + + 0x01000000 0 0x00000000 + 0x01000000 0 0x00000000 + 0 0x00010000>; + }; + }; +}; + +/include/ "fsl/p2041si-post.dtsi" diff --git a/arch/powerpc/boot/dts/kmeter1.dts b/arch/powerpc/boot/dts/kmeter1.dts new file mode 100644 index 000000000..983aee185 --- /dev/null +++ b/arch/powerpc/boot/dts/kmeter1.dts @@ -0,0 +1,532 @@ +/* + * Keymile KMETER1 Device Tree Source + * + * 2008-2011 DENX Software Engineering GmbH + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +/dts-v1/; + +/ { + model = "KMETER1"; + compatible = "keymile,KMETER1"; + #address-cells = <1>; + #size-cells = <1>; + + aliases { + ethernet0 = &enet_piggy2; + ethernet1 = &enet_estar1; + ethernet2 = &enet_estar2; + ethernet3 = &enet_eth1; + ethernet4 = &enet_eth2; + ethernet5 = &enet_eth3; + ethernet6 = &enet_eth4; + serial0 = &serial0; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + PowerPC,8360@0 { + device_type = "cpu"; + reg = <0x0>; + d-cache-line-size = <32>; // 32 bytes + i-cache-line-size = <32>; // 32 bytes + d-cache-size = <32768>; // L1, 32K + i-cache-size = <32768>; // L1, 32K + timebase-frequency = <0>; /* Filled in by U-Boot */ + bus-frequency = <0>; /* Filled in by U-Boot */ + clock-frequency = <0>; /* Filled in by U-Boot */ + }; + }; + + memory { + device_type = "memory"; + reg = <0 0>; /* Filled in by U-Boot */ + }; + + soc8360@e0000000 { + #address-cells = <1>; + #size-cells = <1>; + device_type = "soc"; + compatible = "fsl,mpc8360-immr", "simple-bus"; + ranges = <0x0 0xe0000000 0x00200000>; + reg = <0xe0000000 0x00000200>; + bus-frequency = <0>; /* Filled in by U-Boot */ + + pmc: power@b00 { + compatible = "fsl,mpc8360-pmc", "fsl,mpc8349-pmc"; + reg = <0xb00 0x100 0xa00 0x100>; + interrupts = <80 0x8>; + interrupt-parent = <&ipic>; + }; + + i2c@3000 { + #address-cells = <1>; + #size-cells = <0>; + cell-index = <0>; + compatible = "fsl,mpc8313-i2c","fsl-i2c"; + reg = <0x3000 0x100>; + interrupts = <14 0x8>; + interrupt-parent = <&ipic>; + clock-frequency = <400000>; + }; + + serial0: serial@4500 { + cell-index = <0>; + device_type = "serial"; + compatible = "fsl,ns16550", "ns16550"; + reg = <0x4500 0x100>; + clock-frequency = <264000000>; + interrupts = <9 0x8>; + interrupt-parent = <&ipic>; + }; + + dma@82a8 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,mpc8360-dma", "fsl,elo-dma"; + reg = <0x82a8 4>; + ranges = <0 0x8100 0x1a8>; + interrupt-parent = <&ipic>; + interrupts = <71 8>; + cell-index = <0>; + dma-channel@0 { + compatible = "fsl,mpc8360-dma-channel", "fsl,elo-dma-channel"; + reg = <0 0x80>; + interrupt-parent = <&ipic>; + interrupts = <71 8>; + }; + dma-channel@80 { + compatible = "fsl,mpc8360-dma-channel", "fsl,elo-dma-channel"; + reg = <0x80 0x80>; + interrupt-parent = <&ipic>; + interrupts = <71 8>; + }; + dma-channel@100 { + compatible = "fsl,mpc8360-dma-channel", "fsl,elo-dma-channel"; + reg = <0x100 0x80>; + interrupt-parent = <&ipic>; + interrupts = <71 8>; + }; + dma-channel@180 { + compatible = "fsl,mpc8360-dma-channel", "fsl,elo-dma-channel"; + reg = <0x180 0x28>; + interrupt-parent = <&ipic>; + interrupts = <71 8>; + }; + }; + + ipic: pic@700 { + #address-cells = <0>; + #interrupt-cells = <2>; + compatible = "fsl,pq2pro-pic", "fsl,ipic"; + interrupt-controller; + reg = <0x700 0x100>; + }; + + par_io@1400 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x1400 0x100>; + compatible = "fsl,mpc8360-par_io"; + num-ports = <7>; + + qe_pio_c: gpio-controller@30 { + #gpio-cells = <2>; + compatible = "fsl,mpc8360-qe-pario-bank", + "fsl,mpc8323-qe-pario-bank"; + reg = <0x1430 0x18>; + gpio-controller; + }; + pio_ucc1: ucc_pin@0 { + reg = <0>; + + pio-map = < + /* port pin dir open_drain assignment has_irq */ + 0 1 3 0 2 0 /* MDIO */ + 0 2 1 0 1 0 /* MDC */ + + 0 3 1 0 1 0 /* TxD0 */ + 0 4 1 0 1 0 /* TxD1 */ + 0 5 1 0 1 0 /* TxD2 */ + 0 6 1 0 1 0 /* TxD3 */ + 0 9 2 0 1 0 /* RxD0 */ + 0 10 2 0 1 0 /* RxD1 */ + 0 11 2 0 1 0 /* RxD2 */ + 0 12 2 0 1 0 /* RxD3 */ + 0 7 1 0 1 0 /* TX_EN */ + 0 8 1 0 1 0 /* TX_ER */ + 0 15 2 0 1 0 /* RX_DV */ + 0 16 2 0 1 0 /* RX_ER */ + 0 0 2 0 1 0 /* RX_CLK */ + 2 9 1 0 3 0 /* GTX_CLK - CLK10 */ + 2 8 2 0 1 0 /* GTX125 - CLK9 */ + >; + }; + + pio_ucc2: ucc_pin@1 { + reg = <1>; + + pio-map = < + /* port pin dir open_drain assignment has_irq */ + 0 1 3 0 2 0 /* MDIO */ + 0 2 1 0 1 0 /* MDC */ + + 0 17 1 0 1 0 /* TxD0 */ + 0 18 1 0 1 0 /* TxD1 */ + 0 19 1 0 1 0 /* TxD2 */ + 0 20 1 0 1 0 /* TxD3 */ + 0 23 2 0 1 0 /* RxD0 */ + 0 24 2 0 1 0 /* RxD1 */ + 0 25 2 0 1 0 /* RxD2 */ + 0 26 2 0 1 0 /* RxD3 */ + 0 21 1 0 1 0 /* TX_EN */ + 0 22 1 0 1 0 /* TX_ER */ + 0 29 2 0 1 0 /* RX_DV */ + 0 30 2 0 1 0 /* RX_ER */ + 0 31 2 0 1 0 /* RX_CLK */ + 2 2 1 0 2 0 /* GTX_CLK - CLK3 */ + 2 3 2 0 1 0 /* GTX125 - CLK4 */ + >; + }; + + pio_ucc4: ucc_pin@3 { + reg = <3>; + + pio-map = < + /* port pin dir open_drain assignment has_irq */ + 0 1 3 0 2 0 /* MDIO */ + 0 2 1 0 1 0 /* MDC */ + + 1 14 1 0 1 0 /* TxD0 (PB14, out, f1) */ + 1 15 1 0 1 0 /* TxD1 (PB15, out, f1) */ + 1 20 2 0 1 0 /* RxD0 (PB20, in, f1) */ + 1 21 2 0 1 0 /* RxD1 (PB21, in, f1) */ + 1 18 1 0 1 0 /* TX_EN (PB18, out, f1) */ + 1 26 2 0 1 0 /* RX_DV (PB26, in, f1) */ + 1 27 2 0 1 0 /* RX_ER (PB27, in, f1) */ + + 2 16 2 0 1 0 /* UCC4_RMII_CLK (CLK17) */ + >; + }; + + pio_ucc5: ucc_pin@4 { + reg = <4>; + + pio-map = < + /* port pin dir open_drain assignment has_irq */ + 0 1 3 0 2 0 /* MDIO */ + 0 2 1 0 1 0 /* MDC */ + + 3 0 1 0 1 0 /* TxD0 (PD0, out, f1) */ + 3 1 1 0 1 0 /* TxD1 (PD1, out, f1) */ + 3 6 2 0 1 0 /* RxD0 (PD6, in, f1) */ + 3 7 2 0 1 0 /* RxD1 (PD7, in, f1) */ + 3 4 1 0 1 0 /* TX_EN (PD4, out, f1) */ + 3 12 2 0 1 0 /* RX_DV (PD12, in, f1) */ + 3 13 2 0 1 0 /* RX_ER (PD13, in, f1) */ + >; + }; + + pio_ucc6: ucc_pin@5 { + reg = <5>; + + pio-map = < + /* port pin dir open_drain assignment has_irq */ + 0 1 3 0 2 0 /* MDIO */ + 0 2 1 0 1 0 /* MDC */ + + 3 14 1 0 1 0 /* TxD0 (PD14, out, f1) */ + 3 15 1 0 1 0 /* TxD1 (PD15, out, f1) */ + 3 20 2 0 1 0 /* RxD0 (PD20, in, f1) */ + 3 21 2 0 1 0 /* RxD1 (PD21, in, f1) */ + 3 18 1 0 1 0 /* TX_EN (PD18, out, f1) */ + 3 26 2 0 1 0 /* RX_DV (PD26, in, f1) */ + 3 27 2 0 1 0 /* RX_ER (PD27, in, f1) */ + >; + }; + + pio_ucc7: ucc_pin@6 { + reg = <6>; + + pio-map = < + /* port pin dir open_drain assignment has_irq */ + 0 1 3 0 2 0 /* MDIO */ + 0 2 1 0 1 0 /* MDC */ + + 4 0 1 0 1 0 /* TxD0 (PE0, out, f1) */ + 4 1 1 0 1 0 /* TxD1 (PE1, out, f1) */ + 4 6 2 0 1 0 /* RxD0 (PE6, in, f1) */ + 4 7 2 0 1 0 /* RxD1 (PE7, in, f1) */ + 4 4 1 0 1 0 /* TX_EN (PE4, out, f1) */ + 4 12 2 0 1 0 /* RX_DV (PE12, in, f1) */ + 4 13 2 0 1 0 /* RX_ER (PE13, in, f1) */ + >; + }; + + pio_ucc8: ucc_pin@7 { + reg = <7>; + + pio-map = < + /* port pin dir open_drain assignment has_irq */ + 0 1 3 0 2 0 /* MDIO */ + 0 2 1 0 1 0 /* MDC */ + + 4 14 1 0 2 0 /* TxD0 (PE14, out, f2) */ + 4 15 1 0 1 0 /* TxD1 (PE15, out, f1) */ + 4 20 2 0 1 0 /* RxD0 (PE20, in, f1) */ + 4 21 2 0 1 0 /* RxD1 (PE21, in, f1) */ + 4 18 1 0 1 0 /* TX_EN (PE18, out, f1) */ + 4 26 2 0 1 0 /* RX_DV (PE26, in, f1) */ + 4 27 2 0 1 0 /* RX_ER (PE27, in, f1) */ + + 2 15 2 0 1 0 /* UCCx_RMII_CLK (CLK16) */ + >; + }; + + }; + + qe@100000 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,qe"; + ranges = <0x0 0x100000 0x100000>; + reg = <0x100000 0x480>; + clock-frequency = <0>; /* Filled in by U-Boot */ + brg-frequency = <0>; /* Filled in by U-Boot */ + bus-frequency = <0>; /* Filled in by U-Boot */ + + muram@10000 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,qe-muram", "fsl,cpm-muram"; + ranges = <0x0 0x00010000 0x0000c000>; + + data-only@0 { + compatible = "fsl,qe-muram-data", + "fsl,cpm-muram-data"; + reg = <0x0 0xc000>; + }; + }; + + /* ESTAR-1 (UCC1, MDIO 0x10, RGMII) */ + enet_estar1: ucc@2000 { + device_type = "network"; + compatible = "ucc_geth"; + cell-index = <1>; + reg = <0x2000 0x200>; + interrupts = <32>; + interrupt-parent = <&qeic>; + local-mac-address = [ 00 00 00 00 00 00 ]; + rx-clock-name = "none"; + tx-clock-name = "clk9"; + phy-handle = <&phy_estar1>; + phy-connection-type = "rgmii-id"; + pio-handle = <&pio_ucc1>; + }; + + /* ESTAR-2 (UCC2, MDIO 0x11, RGMII) */ + enet_estar2: ucc@3000 { + device_type = "network"; + compatible = "ucc_geth"; + cell-index = <2>; + reg = <0x3000 0x200>; + interrupts = <33>; + interrupt-parent = <&qeic>; + local-mac-address = [ 00 00 00 00 00 00 ]; + rx-clock-name = "none"; + tx-clock-name = "clk4"; + phy-handle = <&phy_estar2>; + phy-connection-type = "rgmii-id"; + pio-handle = <&pio_ucc2>; + }; + + /* Piggy2 (UCC4, MDIO 0x00, RMII) */ + enet_piggy2: ucc@3200 { + device_type = "network"; + compatible = "ucc_geth"; + cell-index = <4>; + reg = <0x3200 0x200>; + interrupts = <35>; + interrupt-parent = <&qeic>; + local-mac-address = [ 00 00 00 00 00 00 ]; + rx-clock-name = "none"; + tx-clock-name = "clk17"; + phy-handle = <&phy_piggy2>; + phy-connection-type = "rmii"; + pio-handle = <&pio_ucc4>; + }; + + /* Eth-1 (UCC5, MDIO 0x08, RMII) */ + enet_eth1: ucc@2400 { + device_type = "network"; + compatible = "ucc_geth"; + cell-index = <5>; + reg = <0x2400 0x200>; + interrupts = <40>; + interrupt-parent = <&qeic>; + local-mac-address = [ 00 00 00 00 00 00 ]; + rx-clock-name = "none"; + tx-clock-name = "clk16"; + phy-handle = <&phy_eth1>; + phy-connection-type = "rmii"; + pio-handle = <&pio_ucc5>; + }; + + /* Eth-2 (UCC6, MDIO 0x09, RMII) */ + enet_eth2: ucc@3400 { + device_type = "network"; + compatible = "ucc_geth"; + cell-index = <6>; + reg = <0x3400 0x200>; + interrupts = <41>; + interrupt-parent = <&qeic>; + local-mac-address = [ 00 00 00 00 00 00 ]; + rx-clock-name = "none"; + tx-clock-name = "clk16"; + phy-handle = <&phy_eth2>; + phy-connection-type = "rmii"; + pio-handle = <&pio_ucc6>; + }; + + /* Eth-3 (UCC7, MDIO 0x0a, RMII) */ + enet_eth3: ucc@2600 { + device_type = "network"; + compatible = "ucc_geth"; + cell-index = <7>; + reg = <0x2600 0x200>; + interrupts = <42>; + interrupt-parent = <&qeic>; + local-mac-address = [ 00 00 00 00 00 00 ]; + rx-clock-name = "none"; + tx-clock-name = "clk16"; + phy-handle = <&phy_eth3>; + phy-connection-type = "rmii"; + pio-handle = <&pio_ucc7>; + }; + + /* Eth-4 (UCC8, MDIO 0x0b, RMII) */ + enet_eth4: ucc@3600 { + device_type = "network"; + compatible = "ucc_geth"; + cell-index = <8>; + reg = <0x3600 0x200>; + interrupts = <43>; + interrupt-parent = <&qeic>; + local-mac-address = [ 00 00 00 00 00 00 ]; + rx-clock-name = "none"; + tx-clock-name = "clk16"; + phy-handle = <&phy_eth4>; + phy-connection-type = "rmii"; + pio-handle = <&pio_ucc8>; + }; + + mdio@3320 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x3320 0x18>; + compatible = "fsl,ucc-mdio"; + + /* Piggy2 (UCC4, MDIO 0x00, RMII) */ + phy_piggy2: ethernet-phy@00 { + reg = <0x0>; + }; + + /* Eth-1 (UCC5, MDIO 0x08, RMII) */ + phy_eth1: ethernet-phy@08 { + reg = <0x08>; + }; + + /* Eth-2 (UCC6, MDIO 0x09, RMII) */ + phy_eth2: ethernet-phy@09 { + reg = <0x09>; + }; + + /* Eth-3 (UCC7, MDIO 0x0a, RMII) */ + phy_eth3: ethernet-phy@0a { + reg = <0x0a>; + }; + + /* Eth-4 (UCC8, MDIO 0x0b, RMII) */ + phy_eth4: ethernet-phy@0b { + reg = <0x0b>; + }; + + /* ESTAR-1 (UCC1, MDIO 0x10, RGMII) */ + phy_estar1: ethernet-phy@10 { + interrupt-parent = <&ipic>; + interrupts = <17 0x8>; + reg = <0x10>; + }; + + /* ESTAR-2 (UCC2, MDIO 0x11, RGMII) */ + phy_estar2: ethernet-phy@11 { + interrupt-parent = <&ipic>; + interrupts = <18 0x8>; + reg = <0x11>; + }; + }; + + qeic: interrupt-controller@80 { + interrupt-controller; + compatible = "fsl,qe-ic"; + #address-cells = <0>; + #interrupt-cells = <1>; + reg = <0x80 0x80>; + big-endian; + interrupts = < + 32 0x8 + 33 0x8 + 34 0x8 + 35 0x8 + 40 0x8 + 41 0x8 + 42 0x8 + 43 0x8 + >; + interrupt-parent = <&ipic>; + }; + }; + }; + + localbus@e0005000 { + #address-cells = <2>; + #size-cells = <1>; + compatible = "fsl,mpc8360-localbus", "fsl,pq2pro-localbus", + "simple-bus"; + reg = <0xe0005000 0xd8>; + ranges = <0 0 0xf0000000 0x04000000 /* LB 0 */ + 1 0 0xe8000000 0x01000000 /* LB 1 */ + 3 0 0xa0000000 0x10000000>; /* LB 3 */ + + flash@0,0 { + compatible = "cfi-flash"; + reg = <0 0 0x04000000>; + #address-cells = <1>; + #size-cells = <1>; + bank-width = <2>; + partition@0 { /* 768KB */ + label = "u-boot"; + reg = <0 0xC0000>; + }; + partition@c0000 { /* 128KB */ + label = "env"; + reg = <0xC0000 0x20000>; + }; + partition@e0000 { /* 128KB */ + label = "envred"; + reg = <0xE0000 0x20000>; + }; + partition@100000 { /* 64512KB */ + label = "ubi0"; + reg = <0x100000 0x3F00000>; + }; + }; + }; +}; diff --git a/arch/powerpc/boot/dts/ksi8560.dts b/arch/powerpc/boot/dts/ksi8560.dts new file mode 100644 index 000000000..5d68236e7 --- /dev/null +++ b/arch/powerpc/boot/dts/ksi8560.dts @@ -0,0 +1,344 @@ +/* + * Device Tree Source for Emerson KSI8560 + * + * Author: Alexandr Smirnov <asmirnov@ru.mvista.com> + * + * Based on mpc8560ads.dts + * + * 2008 (c) MontaVista, Software, Inc. This file is licensed under + * the terms of the GNU General Public License version 2. This program + * is licensed "as is" without any warranty of any kind, whether express + * or implied. + * + */ + +/dts-v1/; + +/ { + model = "KSI8560"; + compatible = "emerson,KSI8560"; + #address-cells = <1>; + #size-cells = <1>; + + aliases { + ethernet0 = &enet0; + ethernet1 = &enet1; + ethernet2 = &enet2; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + PowerPC,8560@0 { + device_type = "cpu"; + reg = <0>; + d-cache-line-size = <32>; + i-cache-line-size = <32>; + d-cache-size = <0x8000>; /* L1, 32K */ + i-cache-size = <0x8000>; /* L1, 32K */ + timebase-frequency = <0>; /* From U-boot */ + bus-frequency = <0>; /* From U-boot */ + clock-frequency = <0>; /* From U-boot */ + next-level-cache = <&L2>; + }; + }; + + memory { + device_type = "memory"; + reg = <0x00000000 0x10000000>; /* Fixed by bootwrapper */ + }; + + soc@fdf00000 { + #address-cells = <1>; + #size-cells = <1>; + device_type = "soc"; + ranges = <0x00000000 0xfdf00000 0x00100000>; + bus-frequency = <0>; /* Fixed by bootwrapper */ + + ecm-law@0 { + compatible = "fsl,ecm-law"; + reg = <0x0 0x1000>; + fsl,num-laws = <8>; + }; + + ecm@1000 { + compatible = "fsl,mpc8560-ecm", "fsl,ecm"; + reg = <0x1000 0x1000>; + interrupts = <17 2>; + interrupt-parent = <&mpic>; + }; + + memory-controller@2000 { + compatible = "fsl,mpc8540-memory-controller"; + reg = <0x2000 0x1000>; + interrupt-parent = <&mpic>; + interrupts = <0x12 0x2>; + }; + + L2: l2-cache-controller@20000 { + compatible = "fsl,mpc8540-l2-cache-controller"; + reg = <0x20000 0x1000>; + cache-line-size = <0x20>; /* 32 bytes */ + cache-size = <0x40000>; /* L2, 256K */ + interrupt-parent = <&mpic>; + interrupts = <0x10 0x2>; + }; + + i2c@3000 { + #address-cells = <1>; + #size-cells = <0>; + cell-index = <0>; + compatible = "fsl-i2c"; + reg = <0x3000 0x100>; + interrupts = <0x2b 0x2>; + interrupt-parent = <&mpic>; + dfsrr; + }; + + dma@21300 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,mpc8560-dma", "fsl,eloplus-dma"; + reg = <0x21300 0x4>; + ranges = <0x0 0x21100 0x200>; + cell-index = <0>; + dma-channel@0 { + compatible = "fsl,mpc8560-dma-channel", + "fsl,eloplus-dma-channel"; + reg = <0x0 0x80>; + cell-index = <0>; + interrupt-parent = <&mpic>; + interrupts = <20 2>; + }; + dma-channel@80 { + compatible = "fsl,mpc8560-dma-channel", + "fsl,eloplus-dma-channel"; + reg = <0x80 0x80>; + cell-index = <1>; + interrupt-parent = <&mpic>; + interrupts = <21 2>; + }; + dma-channel@100 { + compatible = "fsl,mpc8560-dma-channel", + "fsl,eloplus-dma-channel"; + reg = <0x100 0x80>; + cell-index = <2>; + interrupt-parent = <&mpic>; + interrupts = <22 2>; + }; + dma-channel@180 { + compatible = "fsl,mpc8560-dma-channel", + "fsl,eloplus-dma-channel"; + reg = <0x180 0x80>; + cell-index = <3>; + interrupt-parent = <&mpic>; + interrupts = <23 2>; + }; + }; + + enet0: ethernet@24000 { + #address-cells = <1>; + #size-cells = <1>; + device_type = "network"; + model = "TSEC"; + compatible = "gianfar"; + reg = <0x24000 0x1000>; + ranges = <0x0 0x24000 0x1000>; + /* Mac address filled in by bootwrapper */ + local-mac-address = [ 00 00 00 00 00 00 ]; + interrupts = <0x1d 0x2 0x1e 0x2 0x22 0x2>; + interrupt-parent = <&mpic>; + tbi-handle = <&tbi0>; + phy-handle = <&PHY1>; + + mdio@520 { /* For TSECs */ + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,gianfar-mdio"; + reg = <0x520 0x20>; + + PHY1: ethernet-phy@1 { + interrupt-parent = <&mpic>; + reg = <0x1>; + }; + + PHY2: ethernet-phy@2 { + interrupt-parent = <&mpic>; + reg = <0x2>; + }; + + tbi0: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + }; + + enet1: ethernet@25000 { + #address-cells = <1>; + #size-cells = <1>; + device_type = "network"; + model = "TSEC"; + compatible = "gianfar"; + reg = <0x25000 0x1000>; + ranges = <0x0 0x25000 0x1000>; + /* Mac address filled in by bootwrapper */ + local-mac-address = [ 00 00 00 00 00 00 ]; + interrupts = <0x23 0x2 0x24 0x2 0x28 0x2>; + interrupt-parent = <&mpic>; + tbi-handle = <&tbi1>; + phy-handle = <&PHY2>; + + mdio@520 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,gianfar-tbi"; + reg = <0x520 0x20>; + + tbi1: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + }; + + mpic: pic@40000 { + #address-cells = <0>; + #interrupt-cells = <2>; + interrupt-controller; + reg = <0x40000 0x40000>; + device_type = "open-pic"; + }; + + cpm@919c0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,mpc8560-cpm", "fsl,cpm2"; + reg = <0x919c0 0x30>; + ranges; + + muram@80000 { + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x80000 0x10000>; + + data@0 { + compatible = "fsl,cpm-muram-data"; + reg = <0x0 0x4000 0x9000 0x2000>; + }; + }; + + brg@919f0 { + compatible = "fsl,mpc8560-brg", + "fsl,cpm2-brg", + "fsl,cpm-brg"; + reg = <0x919f0 0x10 0x915f0 0x10>; + clock-frequency = <165000000>; /* 166MHz */ + }; + + CPMPIC: pic@90c00 { + #address-cells = <0>; + #interrupt-cells = <2>; + interrupt-controller; + interrupts = <0x2e 0x2>; + interrupt-parent = <&mpic>; + reg = <0x90c00 0x80>; + compatible = "fsl,mpc8560-cpm-pic", "fsl,cpm2-pic"; + }; + + serial@91a00 { + device_type = "serial"; + compatible = "fsl,mpc8560-scc-uart", + "fsl,cpm2-scc-uart"; + reg = <0x91a00 0x20 0x88000 0x100>; + fsl,cpm-brg = <1>; + fsl,cpm-command = <0x800000>; + current-speed = <0x1c200>; + interrupts = <0x28 0x8>; + interrupt-parent = <&CPMPIC>; + }; + + serial@91a20 { + device_type = "serial"; + compatible = "fsl,mpc8560-scc-uart", + "fsl,cpm2-scc-uart"; + reg = <0x91a20 0x20 0x88100 0x100>; + fsl,cpm-brg = <2>; + fsl,cpm-command = <0x4a00000>; + current-speed = <0x1c200>; + interrupts = <0x29 0x8>; + interrupt-parent = <&CPMPIC>; + }; + + mdio@90d00 { /* For FCCs */ + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,cpm2-mdio-bitbang"; + reg = <0x90d00 0x14>; + fsl,mdio-pin = <24>; + fsl,mdc-pin = <25>; + + PHY0: ethernet-phy@0 { + interrupt-parent = <&mpic>; + reg = <0x0>; + }; + }; + + enet2: ethernet@91300 { + device_type = "network"; + compatible = "fsl,mpc8560-fcc-enet", + "fsl,cpm2-fcc-enet"; + reg = <0x91300 0x20 0x88400 0x100 0x91390 0x1>; + /* Mac address filled in by bootwrapper */ + local-mac-address = [ 00 00 00 00 00 00 ]; + fsl,cpm-command = <0x12000300>; + interrupts = <0x20 0x8>; + interrupt-parent = <&CPMPIC>; + phy-handle = <&PHY0>; + }; + }; + }; + + localbus@fdf05000 { + #address-cells = <2>; + #size-cells = <1>; + compatible = "fsl,mpc8560-localbus", "simple-bus"; + reg = <0xfdf05000 0x68>; + + ranges = <0x0 0x0 0xe0000000 0x00800000 + 0x4 0x0 0xe8080000 0x00080000>; + + flash@0,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "jedec-flash"; + reg = <0x0 0x0 0x800000>; + bank-width = <0x2>; + + partition@0 { + label = "Primary Kernel"; + reg = <0x0 0x180000>; + }; + partition@180000 { + label = "Primary Filesystem"; + reg = <0x180000 0x580000>; + }; + partition@700000 { + label = "Monitor"; + reg = <0x300000 0x100000>; + read-only; + }; + }; + + cpld@4,0 { + compatible = "emerson,KSI8560-cpld"; + reg = <0x4 0x0 0x80000>; + }; + }; + + + chosen { + linux,stdout-path = "/soc/cpm/serial@91a00"; + }; +}; diff --git a/arch/powerpc/boot/dts/kuroboxHD.dts b/arch/powerpc/boot/dts/kuroboxHD.dts new file mode 100644 index 000000000..0a4545159 --- /dev/null +++ b/arch/powerpc/boot/dts/kuroboxHD.dts @@ -0,0 +1,147 @@ +/* + * Device Tree Souce for Buffalo KuroboxHD + * + * Choose CONFIG_LINKSTATION to build a kernel for KuroboxHD, or use + * the default configuration linkstation_defconfig. + * + * Based on sandpoint.dts + * + * 2006 (c) G. Liakhovetski <g.liakhovetski@gmx.de> + * Copyright 2008 Freescale Semiconductor, Inc. + * + * This file is licensed under + * the terms of the GNU General Public License version 2. This program + * is licensed "as is" without any warranty of any kind, whether express + * or implied. + +XXXX add flash parts, rtc, ?? + + */ + +/dts-v1/; + +/ { + model = "KuroboxHD"; + compatible = "linkstation"; + #address-cells = <1>; + #size-cells = <1>; + + aliases { + serial0 = &serial0; + serial1 = &serial1; + pci0 = &pci0; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + PowerPC,603e { /* Really 8241 */ + device_type = "cpu"; + reg = <0x0>; + clock-frequency = <200000000>; /* Fixed by bootloader */ + timebase-frequency = <24391680>; /* Fixed by bootloader */ + bus-frequency = <0>; /* Fixed by bootloader */ + /* Following required by dtc but not used */ + i-cache-size = <0x4000>; + d-cache-size = <0x4000>; + }; + }; + + memory { + device_type = "memory"; + reg = <0x0 0x4000000>; + }; + + soc10x { /* AFAICT need to make soc for 8245's uarts to be defined */ + #address-cells = <1>; + #size-cells = <1>; + device_type = "soc"; + compatible = "mpc10x"; + store-gathering = <0>; /* 0 == off, !0 == on */ + reg = <0x80000000 0x100000>; + ranges = <0x80000000 0x80000000 0x70000000 /* pci mem space */ + 0xfc000000 0xfc000000 0x100000 /* EUMB */ + 0xfe000000 0xfe000000 0xc00000 /* pci i/o space */ + 0xfec00000 0xfec00000 0x300000 /* pci cfg regs */ + 0xfef00000 0xfef00000 0x100000>; /* pci iack */ + + i2c@80003000 { + #address-cells = <1>; + #size-cells = <0>; + cell-index = <0>; + compatible = "fsl-i2c"; + reg = <0x80003000 0x1000>; + interrupts = <5 2>; + interrupt-parent = <&mpic>; + + rtc@32 { + compatible = "ricoh,rs5c372a"; + reg = <0x32>; + }; + }; + + serial0: serial@80004500 { + cell-index = <0>; + device_type = "serial"; + compatible = "fsl,ns16550", "ns16550"; + reg = <0x80004500 0x8>; + clock-frequency = <97553800>; + current-speed = <9600>; + interrupts = <9 0>; + interrupt-parent = <&mpic>; + }; + + serial1: serial@80004600 { + cell-index = <1>; + device_type = "serial"; + compatible = "fsl,ns16550", "ns16550"; + reg = <0x80004600 0x8>; + clock-frequency = <97553800>; + current-speed = <57600>; + interrupts = <10 0>; + interrupt-parent = <&mpic>; + }; + + mpic: interrupt-controller@80040000 { + #interrupt-cells = <2>; + #address-cells = <0>; + device_type = "open-pic"; + compatible = "chrp,open-pic"; + interrupt-controller; + reg = <0x80040000 0x40000>; + }; + + pci0: pci@fec00000 { + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + device_type = "pci"; + compatible = "mpc10x-pci"; + reg = <0xfec00000 0x400000>; + ranges = <0x1000000 0x0 0x0 0xfe000000 0x0 0xc00000 + 0x2000000 0x0 0x80000000 0x80000000 0x0 0x70000000>; + bus-range = <0 255>; + clock-frequency = <133333333>; + interrupt-parent = <&mpic>; + interrupt-map-mask = <0xf800 0x0 0x0 0x7>; + interrupt-map = < + /* IDSEL 11 - IRQ0 ETH */ + 0x5800 0x0 0x0 0x1 &mpic 0x0 0x1 + 0x5800 0x0 0x0 0x2 &mpic 0x1 0x1 + 0x5800 0x0 0x0 0x3 &mpic 0x2 0x1 + 0x5800 0x0 0x0 0x4 &mpic 0x3 0x1 + /* IDSEL 12 - IRQ1 IDE0 */ + 0x6000 0x0 0x0 0x1 &mpic 0x1 0x1 + 0x6000 0x0 0x0 0x2 &mpic 0x2 0x1 + 0x6000 0x0 0x0 0x3 &mpic 0x3 0x1 + 0x6000 0x0 0x0 0x4 &mpic 0x0 0x1 + /* IDSEL 14 - IRQ3 USB2.0 */ + 0x7000 0x0 0x0 0x1 &mpic 0x3 0x1 + 0x7000 0x0 0x0 0x2 &mpic 0x3 0x1 + 0x7000 0x0 0x0 0x3 &mpic 0x3 0x1 + 0x7000 0x0 0x0 0x4 &mpic 0x3 0x1 + >; + }; + }; +}; diff --git a/arch/powerpc/boot/dts/kuroboxHG.dts b/arch/powerpc/boot/dts/kuroboxHG.dts new file mode 100644 index 000000000..0e758b347 --- /dev/null +++ b/arch/powerpc/boot/dts/kuroboxHG.dts @@ -0,0 +1,147 @@ +/* + * Device Tree Souce for Buffalo KuroboxHG + * + * Choose CONFIG_LINKSTATION to build a kernel for KuroboxHG, or use + * the default configuration linkstation_defconfig. + * + * Based on sandpoint.dts + * + * 2006 (c) G. Liakhovetski <g.liakhovetski@gmx.de> + * Copyright 2008 Freescale Semiconductor, Inc. + * + * This file is licensed under + * the terms of the GNU General Public License version 2. This program + * is licensed "as is" without any warranty of any kind, whether express + * or implied. + +XXXX add flash parts, rtc, ?? + + */ + +/dts-v1/; + +/ { + model = "KuroboxHG"; + compatible = "linkstation"; + #address-cells = <1>; + #size-cells = <1>; + + aliases { + serial0 = &serial0; + serial1 = &serial1; + pci0 = &pci0; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + PowerPC,603e { /* Really 8241 */ + device_type = "cpu"; + reg = <0x0>; + clock-frequency = <266000000>; /* Fixed by bootloader */ + timebase-frequency = <32522240>; /* Fixed by bootloader */ + bus-frequency = <0>; /* Fixed by bootloader */ + /* Following required by dtc but not used */ + i-cache-size = <0x4000>; + d-cache-size = <0x4000>; + }; + }; + + memory { + device_type = "memory"; + reg = <0x0 0x8000000>; + }; + + soc10x { /* AFAICT need to make soc for 8245's uarts to be defined */ + #address-cells = <1>; + #size-cells = <1>; + device_type = "soc"; + compatible = "mpc10x"; + store-gathering = <0>; /* 0 == off, !0 == on */ + reg = <0x80000000 0x100000>; + ranges = <0x80000000 0x80000000 0x70000000 /* pci mem space */ + 0xfc000000 0xfc000000 0x100000 /* EUMB */ + 0xfe000000 0xfe000000 0xc00000 /* pci i/o space */ + 0xfec00000 0xfec00000 0x300000 /* pci cfg regs */ + 0xfef00000 0xfef00000 0x100000>; /* pci iack */ + + i2c@80003000 { + #address-cells = <1>; + #size-cells = <0>; + cell-index = <0>; + compatible = "fsl-i2c"; + reg = <0x80003000 0x1000>; + interrupts = <5 2>; + interrupt-parent = <&mpic>; + + rtc@32 { + compatible = "ricoh,rs5c372a"; + reg = <0x32>; + }; + }; + + serial0: serial@80004500 { + cell-index = <0>; + device_type = "serial"; + compatible = "fsl,ns16550", "ns16550"; + reg = <0x80004500 0x8>; + clock-frequency = <130041000>; + current-speed = <9600>; + interrupts = <9 0>; + interrupt-parent = <&mpic>; + }; + + serial1: serial@80004600 { + cell-index = <1>; + device_type = "serial"; + compatible = "fsl,ns16550", "ns16550"; + reg = <0x80004600 0x8>; + clock-frequency = <130041000>; + current-speed = <57600>; + interrupts = <10 0>; + interrupt-parent = <&mpic>; + }; + + mpic: interrupt-controller@80040000 { + #interrupt-cells = <2>; + #address-cells = <0>; + device_type = "open-pic"; + compatible = "chrp,open-pic"; + interrupt-controller; + reg = <0x80040000 0x40000>; + }; + + pci0: pci@fec00000 { + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + device_type = "pci"; + compatible = "mpc10x-pci"; + reg = <0xfec00000 0x400000>; + ranges = <0x1000000 0x0 0x0 0xfe000000 0x0 0xc00000 + 0x2000000 0x0 0x80000000 0x80000000 0x0 0x70000000>; + bus-range = <0 255>; + clock-frequency = <133333333>; + interrupt-parent = <&mpic>; + interrupt-map-mask = <0xf800 0x0 0x0 0x7>; + interrupt-map = < + /* IDSEL 11 - IRQ0 ETH */ + 0x5800 0x0 0x0 0x1 &mpic 0x0 0x1 + 0x5800 0x0 0x0 0x2 &mpic 0x1 0x1 + 0x5800 0x0 0x0 0x3 &mpic 0x2 0x1 + 0x5800 0x0 0x0 0x4 &mpic 0x3 0x1 + /* IDSEL 12 - IRQ1 IDE0 */ + 0x6000 0x0 0x0 0x1 &mpic 0x1 0x1 + 0x6000 0x0 0x0 0x2 &mpic 0x2 0x1 + 0x6000 0x0 0x0 0x3 &mpic 0x3 0x1 + 0x6000 0x0 0x0 0x4 &mpic 0x0 0x1 + /* IDSEL 14 - IRQ3 USB2.0 */ + 0x7000 0x0 0x0 0x1 &mpic 0x3 0x1 + 0x7000 0x0 0x0 0x2 &mpic 0x3 0x1 + 0x7000 0x0 0x0 0x3 &mpic 0x3 0x1 + 0x7000 0x0 0x0 0x4 &mpic 0x3 0x1 + >; + }; + }; +}; diff --git a/arch/powerpc/boot/dts/lite5200.dts b/arch/powerpc/boot/dts/lite5200.dts new file mode 100644 index 000000000..179a1785d --- /dev/null +++ b/arch/powerpc/boot/dts/lite5200.dts @@ -0,0 +1,308 @@ +/* + * Lite5200 board Device Tree Source + * + * Copyright 2006-2007 Secret Lab Technologies Ltd. + * Grant Likely <grant.likely@secretlab.ca> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +/dts-v1/; + +/ { + model = "fsl,lite5200"; + compatible = "fsl,lite5200"; + #address-cells = <1>; + #size-cells = <1>; + interrupt-parent = <&mpc5200_pic>; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + PowerPC,5200@0 { + device_type = "cpu"; + reg = <0>; + d-cache-line-size = <32>; + i-cache-line-size = <32>; + d-cache-size = <0x4000>; // L1, 16K + i-cache-size = <0x4000>; // L1, 16K + timebase-frequency = <0>; // from bootloader + bus-frequency = <0>; // from bootloader + clock-frequency = <0>; // from bootloader + }; + }; + + memory { + device_type = "memory"; + reg = <0x00000000 0x04000000>; // 64MB + }; + + soc5200@f0000000 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,mpc5200-immr"; + ranges = <0 0xf0000000 0x0000c000>; + reg = <0xf0000000 0x00000100>; + bus-frequency = <0>; // from bootloader + system-frequency = <0>; // from bootloader + + cdm@200 { + compatible = "fsl,mpc5200-cdm"; + reg = <0x200 0x38>; + }; + + mpc5200_pic: interrupt-controller@500 { + // 5200 interrupts are encoded into two levels; + interrupt-controller; + #interrupt-cells = <3>; + compatible = "fsl,mpc5200-pic"; + reg = <0x500 0x80>; + }; + + timer@600 { // General Purpose Timer + compatible = "fsl,mpc5200-gpt"; + reg = <0x600 0x10>; + interrupts = <1 9 0>; + fsl,has-wdt; + }; + + timer@610 { // General Purpose Timer + compatible = "fsl,mpc5200-gpt"; + reg = <0x610 0x10>; + interrupts = <1 10 0>; + }; + + timer@620 { // General Purpose Timer + compatible = "fsl,mpc5200-gpt"; + reg = <0x620 0x10>; + interrupts = <1 11 0>; + }; + + timer@630 { // General Purpose Timer + compatible = "fsl,mpc5200-gpt"; + reg = <0x630 0x10>; + interrupts = <1 12 0>; + }; + + timer@640 { // General Purpose Timer + compatible = "fsl,mpc5200-gpt"; + reg = <0x640 0x10>; + interrupts = <1 13 0>; + }; + + timer@650 { // General Purpose Timer + compatible = "fsl,mpc5200-gpt"; + reg = <0x650 0x10>; + interrupts = <1 14 0>; + }; + + timer@660 { // General Purpose Timer + compatible = "fsl,mpc5200-gpt"; + reg = <0x660 0x10>; + interrupts = <1 15 0>; + }; + + timer@670 { // General Purpose Timer + compatible = "fsl,mpc5200-gpt"; + reg = <0x670 0x10>; + interrupts = <1 16 0>; + }; + + rtc@800 { // Real time clock + compatible = "fsl,mpc5200-rtc"; + reg = <0x800 0x100>; + interrupts = <1 5 0 1 6 0>; + }; + + can@900 { + compatible = "fsl,mpc5200-mscan"; + interrupts = <2 17 0>; + reg = <0x900 0x80>; + }; + + can@980 { + compatible = "fsl,mpc5200-mscan"; + interrupts = <2 18 0>; + reg = <0x980 0x80>; + }; + + gpio@b00 { + compatible = "fsl,mpc5200-gpio"; + reg = <0xb00 0x40>; + interrupts = <1 7 0>; + gpio-controller; + #gpio-cells = <2>; + }; + + gpio@c00 { + compatible = "fsl,mpc5200-gpio-wkup"; + reg = <0xc00 0x40>; + interrupts = <1 8 0 0 3 0>; + gpio-controller; + #gpio-cells = <2>; + }; + + spi@f00 { + compatible = "fsl,mpc5200-spi"; + reg = <0xf00 0x20>; + interrupts = <2 13 0 2 14 0>; + }; + + usb@1000 { + compatible = "fsl,mpc5200-ohci","ohci-be"; + reg = <0x1000 0xff>; + interrupts = <2 6 0>; + }; + + dma-controller@1200 { + compatible = "fsl,mpc5200-bestcomm"; + reg = <0x1200 0x80>; + interrupts = <3 0 0 3 1 0 3 2 0 3 3 0 + 3 4 0 3 5 0 3 6 0 3 7 0 + 3 8 0 3 9 0 3 10 0 3 11 0 + 3 12 0 3 13 0 3 14 0 3 15 0>; + }; + + xlb@1f00 { + compatible = "fsl,mpc5200-xlb"; + reg = <0x1f00 0x100>; + }; + + serial@2000 { // PSC1 + compatible = "fsl,mpc5200-psc-uart"; + cell-index = <0>; + reg = <0x2000 0x100>; + interrupts = <2 1 0>; + }; + + // PSC2 in ac97 mode example + //ac97@2200 { // PSC2 + // compatible = "fsl,mpc5200-psc-ac97"; + // cell-index = <1>; + // reg = <0x2200 0x100>; + // interrupts = <2 2 0>; + //}; + + // PSC3 in CODEC mode example + //i2s@2400 { // PSC3 + // compatible = "fsl,mpc5200-psc-i2s"; + // cell-index = <2>; + // reg = <0x2400 0x100>; + // interrupts = <2 3 0>; + //}; + + // PSC4 in uart mode example + //serial@2600 { // PSC4 + // compatible = "fsl,mpc5200-psc-uart"; + // cell-index = <3>; + // reg = <0x2600 0x100>; + // interrupts = <2 11 0>; + //}; + + // PSC5 in uart mode example + //serial@2800 { // PSC5 + // compatible = "fsl,mpc5200-psc-uart"; + // cell-index = <4>; + // reg = <0x2800 0x100>; + // interrupts = <2 12 0>; + //}; + + // PSC6 in spi mode example + //spi@2c00 { // PSC6 + // compatible = "fsl,mpc5200-psc-spi"; + // cell-index = <5>; + // reg = <0x2c00 0x100>; + // interrupts = <2 4 0>; + //}; + + ethernet@3000 { + compatible = "fsl,mpc5200-fec"; + reg = <0x3000 0x400>; + local-mac-address = [ 00 00 00 00 00 00 ]; + interrupts = <2 5 0>; + phy-handle = <&phy0>; + }; + + mdio@3000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,mpc5200-mdio"; + reg = <0x3000 0x400>; // fec range, since we need to setup fec interrupts + interrupts = <2 5 0>; // these are for "mii command finished", not link changes & co. + + phy0: ethernet-phy@0 { + reg = <0>; + }; + }; + + ata@3a00 { + compatible = "fsl,mpc5200-ata"; + reg = <0x3a00 0x100>; + interrupts = <2 7 0>; + }; + + i2c@3d00 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,mpc5200-i2c","fsl-i2c"; + reg = <0x3d00 0x40>; + interrupts = <2 15 0>; + }; + + i2c@3d40 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,mpc5200-i2c","fsl-i2c"; + reg = <0x3d40 0x40>; + interrupts = <2 16 0>; + + eeprom@50 { + compatible = "atmel,24c02"; + reg = <0x50>; + }; + }; + + sram@8000 { + compatible = "fsl,mpc5200-sram"; + reg = <0x8000 0x4000>; + }; + }; + + pci@f0000d00 { + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + device_type = "pci"; + compatible = "fsl,mpc5200-pci"; + reg = <0xf0000d00 0x100>; + interrupt-map-mask = <0xf800 0 0 7>; + interrupt-map = <0xc000 0 0 1 &mpc5200_pic 0 0 3 + 0xc000 0 0 2 &mpc5200_pic 0 0 3 + 0xc000 0 0 3 &mpc5200_pic 0 0 3 + 0xc000 0 0 4 &mpc5200_pic 0 0 3>; + clock-frequency = <0>; // From boot loader + interrupts = <2 8 0 2 9 0 2 10 0>; + bus-range = <0 0>; + ranges = <0x42000000 0 0x80000000 0x80000000 0 0x20000000 + 0x02000000 0 0xa0000000 0xa0000000 0 0x10000000 + 0x01000000 0 0x00000000 0xb0000000 0 0x01000000>; + }; + + localbus { + compatible = "fsl,mpc5200-lpb","simple-bus"; + #address-cells = <2>; + #size-cells = <1>; + + ranges = <0 0 0xff000000 0x01000000>; + + flash@0,0 { + compatible = "amd,am29lv652d", "cfi-flash"; + reg = <0 0 0x01000000>; + bank-width = <1>; + }; + }; +}; diff --git a/arch/powerpc/boot/dts/lite5200b.dts b/arch/powerpc/boot/dts/lite5200b.dts new file mode 100644 index 000000000..5abb46c5c --- /dev/null +++ b/arch/powerpc/boot/dts/lite5200b.dts @@ -0,0 +1,161 @@ +/* + * Lite5200B board Device Tree Source + * + * Copyright 2006-2007 Secret Lab Technologies Ltd. + * Grant Likely <grant.likely@secretlab.ca> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +/include/ "mpc5200b.dtsi" + +&gpt0 { fsl,has-wdt; }; +&gpt2 { gpio-controller; }; +&gpt3 { gpio-controller; }; + +/ { + model = "fsl,lite5200b"; + compatible = "fsl,lite5200b"; + + leds { + compatible = "gpio-leds"; + tmr2 { + gpios = <&gpt2 0 1>; + }; + tmr3 { + gpios = <&gpt3 0 1>; + linux,default-trigger = "heartbeat"; + }; + led1 { gpios = <&gpio_wkup 2 1>; }; + led2 { gpios = <&gpio_simple 3 1>; }; + led3 { gpios = <&gpio_wkup 3 1>; }; + led4 { gpios = <&gpio_simple 2 1>; }; + }; + + memory { + reg = <0x00000000 0x10000000>; // 256MB + }; + + soc5200@f0000000 { + psc@2000 { // PSC1 + compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart"; + cell-index = <0>; + }; + + psc@2200 { // PSC2 + status = "disabled"; + }; + + psc@2400 { // PSC3 + status = "disabled"; + }; + + psc@2600 { // PSC4 + status = "disabled"; + }; + + psc@2800 { // PSC5 + status = "disabled"; + }; + + psc@2c00 { // PSC6 + status = "disabled"; + }; + + // PSC2 in ac97 mode example + //ac97@2200 { // PSC2 + // compatible = "fsl,mpc5200b-psc-ac97","fsl,mpc5200-psc-ac97"; + // cell-index = <1>; + //}; + + // PSC3 in CODEC mode example + //i2s@2400 { // PSC3 + // compatible = "fsl,mpc5200b-psc-i2s"; //not 5200 compatible + // cell-index = <2>; + //}; + + // PSC6 in spi mode example + //spi@2c00 { // PSC6 + // compatible = "fsl,mpc5200b-psc-spi","fsl,mpc5200-psc-spi"; + // cell-index = <5>; + //}; + + ethernet@3000 { + phy-handle = <&phy0>; + }; + + mdio@3000 { + phy0: ethernet-phy@0 { + reg = <0>; + }; + }; + + i2c@3d40 { + eeprom@50 { + compatible = "atmel,24c02"; + reg = <0x50>; + }; + }; + + sram@8000 { + compatible = "fsl,mpc5200b-sram","fsl,mpc5200-sram"; + reg = <0x8000 0x4000>; + }; + }; + + pci@f0000d00 { + interrupt-map-mask = <0xf800 0 0 7>; + interrupt-map = <0xc000 0 0 1 &mpc5200_pic 0 0 3 // 1st slot + 0xc000 0 0 2 &mpc5200_pic 1 1 3 + 0xc000 0 0 3 &mpc5200_pic 1 2 3 + 0xc000 0 0 4 &mpc5200_pic 1 3 3 + + 0xc800 0 0 1 &mpc5200_pic 1 1 3 // 2nd slot + 0xc800 0 0 2 &mpc5200_pic 1 2 3 + 0xc800 0 0 3 &mpc5200_pic 1 3 3 + 0xc800 0 0 4 &mpc5200_pic 0 0 3>; + clock-frequency = <0>; // From boot loader + interrupts = <2 8 0 2 9 0 2 10 0>; + bus-range = <0 0>; + ranges = <0x42000000 0 0x80000000 0x80000000 0 0x20000000 + 0x02000000 0 0xa0000000 0xa0000000 0 0x10000000 + 0x01000000 0 0x00000000 0xb0000000 0 0x01000000>; + }; + + localbus { + ranges = <0 0 0xfe000000 0x02000000>; + + flash@0,0 { + compatible = "cfi-flash"; + reg = <0 0 0x02000000>; + bank-width = <1>; + #size-cells = <1>; + #address-cells = <1>; + + partition@0 { + label = "kernel"; + reg = <0x00000000 0x00200000>; + }; + partition@200000 { + label = "rootfs"; + reg = <0x00200000 0x01d00000>; + }; + partition@1f00000 { + label = "u-boot"; + reg = <0x01f00000 0x00060000>; + }; + partition@1f60000 { + label = "u-boot-env"; + reg = <0x01f60000 0x00020000>; + }; + partition@1f80000 { + label = "dtb"; + reg = <0x01f80000 0x00080000>; + }; + }; + }; + +}; diff --git a/arch/powerpc/boot/dts/makalu.dts b/arch/powerpc/boot/dts/makalu.dts new file mode 100644 index 000000000..63d48b632 --- /dev/null +++ b/arch/powerpc/boot/dts/makalu.dts @@ -0,0 +1,353 @@ +/* + * Device Tree Source for AMCC Makalu (405EX) + * + * Copyright 2007 DENX Software Engineering, Stefan Roese <sr@denx.de> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without + * any warranty of any kind, whether express or implied. + */ + +/dts-v1/; + +/ { + #address-cells = <1>; + #size-cells = <1>; + model = "amcc,makalu"; + compatible = "amcc,makalu"; + dcr-parent = <&{/cpus/cpu@0}>; + + aliases { + ethernet0 = &EMAC0; + ethernet1 = &EMAC1; + serial0 = &UART0; + serial1 = &UART1; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu@0 { + device_type = "cpu"; + model = "PowerPC,405EX"; + reg = <0x00000000>; + clock-frequency = <0>; /* Filled in by U-Boot */ + timebase-frequency = <0>; /* Filled in by U-Boot */ + i-cache-line-size = <32>; + d-cache-line-size = <32>; + i-cache-size = <16384>; /* 16 kB */ + d-cache-size = <16384>; /* 16 kB */ + dcr-controller; + dcr-access-method = "native"; + }; + }; + + memory { + device_type = "memory"; + reg = <0x00000000 0x00000000>; /* Filled in by U-Boot */ + }; + + UIC0: interrupt-controller { + compatible = "ibm,uic-405ex", "ibm,uic"; + interrupt-controller; + cell-index = <0>; + dcr-reg = <0x0c0 0x009>; + #address-cells = <0>; + #size-cells = <0>; + #interrupt-cells = <2>; + }; + + UIC1: interrupt-controller1 { + compatible = "ibm,uic-405ex","ibm,uic"; + interrupt-controller; + cell-index = <1>; + dcr-reg = <0x0d0 0x009>; + #address-cells = <0>; + #size-cells = <0>; + #interrupt-cells = <2>; + interrupts = <0x1e 0x4 0x1f 0x4>; /* cascade */ + interrupt-parent = <&UIC0>; + }; + + UIC2: interrupt-controller2 { + compatible = "ibm,uic-405ex","ibm,uic"; + interrupt-controller; + cell-index = <2>; + dcr-reg = <0x0e0 0x009>; + #address-cells = <0>; + #size-cells = <0>; + #interrupt-cells = <2>; + interrupts = <0x1c 0x4 0x1d 0x4>; /* cascade */ + interrupt-parent = <&UIC0>; + }; + + plb { + compatible = "ibm,plb-405ex", "ibm,plb4"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + clock-frequency = <0>; /* Filled in by U-Boot */ + + SDRAM0: memory-controller { + compatible = "ibm,sdram-405ex", "ibm,sdram-4xx-ddr2"; + dcr-reg = <0x010 0x002>; + interrupt-parent = <&UIC2>; + interrupts = <0x5 0x4 /* ECC DED Error */ + 0x6 0x4 /* ECC SEC Error */ >; + }; + + MAL0: mcmal { + compatible = "ibm,mcmal-405ex", "ibm,mcmal2"; + dcr-reg = <0x180 0x062>; + num-tx-chans = <2>; + num-rx-chans = <2>; + interrupt-parent = <&MAL0>; + interrupts = <0x0 0x1 0x2 0x3 0x4>; + #interrupt-cells = <1>; + #address-cells = <0>; + #size-cells = <0>; + interrupt-map = </*TXEOB*/ 0x0 &UIC0 0xa 0x4 + /*RXEOB*/ 0x1 &UIC0 0xb 0x4 + /*SERR*/ 0x2 &UIC1 0x0 0x4 + /*TXDE*/ 0x3 &UIC1 0x1 0x4 + /*RXDE*/ 0x4 &UIC1 0x2 0x4>; + interrupt-map-mask = <0xffffffff>; + }; + + POB0: opb { + compatible = "ibm,opb-405ex", "ibm,opb"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x80000000 0x80000000 0x10000000 + 0xef600000 0xef600000 0x00a00000 + 0xf0000000 0xf0000000 0x10000000>; + dcr-reg = <0x0a0 0x005>; + clock-frequency = <0>; /* Filled in by U-Boot */ + + EBC0: ebc { + compatible = "ibm,ebc-405ex", "ibm,ebc"; + dcr-reg = <0x012 0x002>; + #address-cells = <2>; + #size-cells = <1>; + clock-frequency = <0>; /* Filled in by U-Boot */ + /* ranges property is supplied by U-Boot */ + interrupts = <0x5 0x1>; + interrupt-parent = <&UIC1>; + + nor_flash@0,0 { + compatible = "amd,s29gl512n", "cfi-flash"; + bank-width = <2>; + reg = <0x00000000 0x00000000 0x04000000>; + #address-cells = <1>; + #size-cells = <1>; + partition@0 { + label = "kernel"; + reg = <0x00000000 0x00200000>; + }; + partition@200000 { + label = "root"; + reg = <0x00200000 0x00200000>; + }; + partition@400000 { + label = "user"; + reg = <0x00400000 0x03b60000>; + }; + partition@3f60000 { + label = "env"; + reg = <0x03f60000 0x00040000>; + }; + partition@3fa0000 { + label = "u-boot"; + reg = <0x03fa0000 0x00060000>; + }; + }; + }; + + UART0: serial@ef600200 { + device_type = "serial"; + compatible = "ns16550"; + reg = <0xef600200 0x00000008>; + virtual-reg = <0xef600200>; + clock-frequency = <0>; /* Filled in by U-Boot */ + current-speed = <0>; + interrupt-parent = <&UIC0>; + interrupts = <0x1a 0x4>; + }; + + UART1: serial@ef600300 { + device_type = "serial"; + compatible = "ns16550"; + reg = <0xef600300 0x00000008>; + virtual-reg = <0xef600300>; + clock-frequency = <0>; /* Filled in by U-Boot */ + current-speed = <0>; + interrupt-parent = <&UIC0>; + interrupts = <0x1 0x4>; + }; + + IIC0: i2c@ef600400 { + compatible = "ibm,iic-405ex", "ibm,iic"; + reg = <0xef600400 0x00000014>; + interrupt-parent = <&UIC0>; + interrupts = <0x2 0x4>; + }; + + IIC1: i2c@ef600500 { + compatible = "ibm,iic-405ex", "ibm,iic"; + reg = <0xef600500 0x00000014>; + interrupt-parent = <&UIC0>; + interrupts = <0x7 0x4>; + }; + + + RGMII0: emac-rgmii@ef600b00 { + compatible = "ibm,rgmii-405ex", "ibm,rgmii"; + reg = <0xef600b00 0x00000104>; + has-mdio; + }; + + EMAC0: ethernet@ef600900 { + linux,network-index = <0x0>; + device_type = "network"; + compatible = "ibm,emac-405ex", "ibm,emac4sync"; + interrupt-parent = <&EMAC0>; + interrupts = <0x0 0x1>; + #interrupt-cells = <1>; + #address-cells = <0>; + #size-cells = <0>; + interrupt-map = </*Status*/ 0x0 &UIC0 0x18 0x4 + /*Wake*/ 0x1 &UIC1 0x1d 0x4>; + reg = <0xef600900 0x000000c4>; + local-mac-address = [000000000000]; /* Filled in by U-Boot */ + mal-device = <&MAL0>; + mal-tx-channel = <0>; + mal-rx-channel = <0>; + cell-index = <0>; + max-frame-size = <9000>; + rx-fifo-size = <4096>; + tx-fifo-size = <2048>; + rx-fifo-size-gige = <16384>; + tx-fifo-size-gige = <16384>; + phy-mode = "rgmii"; + phy-map = <0x0000003f>; /* Start at 6 */ + rgmii-device = <&RGMII0>; + rgmii-channel = <0>; + has-inverted-stacr-oc; + has-new-stacr-staopc; + }; + + EMAC1: ethernet@ef600a00 { + linux,network-index = <0x1>; + device_type = "network"; + compatible = "ibm,emac-405ex", "ibm,emac4sync"; + interrupt-parent = <&EMAC1>; + interrupts = <0x0 0x1>; + #interrupt-cells = <1>; + #address-cells = <0>; + #size-cells = <0>; + interrupt-map = </*Status*/ 0x0 &UIC0 0x19 0x4 + /*Wake*/ 0x1 &UIC1 0x1f 0x4>; + reg = <0xef600a00 0x000000c4>; + local-mac-address = [000000000000]; /* Filled in by U-Boot */ + mal-device = <&MAL0>; + mal-tx-channel = <1>; + mal-rx-channel = <1>; + cell-index = <1>; + max-frame-size = <9000>; + rx-fifo-size = <4096>; + tx-fifo-size = <2048>; + rx-fifo-size-gige = <16384>; + tx-fifo-size-gige = <16384>; + phy-mode = "rgmii"; + phy-map = <0x00000000>; + rgmii-device = <&RGMII0>; + rgmii-channel = <1>; + has-inverted-stacr-oc; + has-new-stacr-staopc; + }; + }; + + PCIE0: pciex@0a0000000 { + device_type = "pci"; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + compatible = "ibm,plb-pciex-405ex", "ibm,plb-pciex"; + primary; + port = <0x0>; /* port number */ + reg = <0xa0000000 0x20000000 /* Config space access */ + 0xef000000 0x00001000>; /* Registers */ + dcr-reg = <0x040 0x020>; + sdr-base = <0x400>; + + /* Outbound ranges, one memory and one IO, + * later cannot be changed + */ + ranges = <0x02000000 0x00000000 0x80000000 0x90000000 0x00000000 0x08000000 + 0x01000000 0x00000000 0x00000000 0xe0000000 0x00000000 0x00010000>; + + /* Inbound 2GB range starting at 0 */ + dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x80000000>; + + /* This drives busses 0x00 to 0x3f */ + bus-range = <0x0 0x3f>; + + /* Legacy interrupts (note the weird polarity, the bridge seems + * to invert PCIe legacy interrupts). + * We are de-swizzling here because the numbers are actually for + * port of the root complex virtual P2P bridge. But I want + * to avoid putting a node for it in the tree, so the numbers + * below are basically de-swizzled numbers. + * The real slot is on idsel 0, so the swizzling is 1:1 + */ + interrupt-map-mask = <0x0 0x0 0x0 0x7>; + interrupt-map = < + 0x0 0x0 0x0 0x1 &UIC2 0x0 0x4 /* swizzled int A */ + 0x0 0x0 0x0 0x2 &UIC2 0x1 0x4 /* swizzled int B */ + 0x0 0x0 0x0 0x3 &UIC2 0x2 0x4 /* swizzled int C */ + 0x0 0x0 0x0 0x4 &UIC2 0x3 0x4 /* swizzled int D */>; + }; + + PCIE1: pciex@0c0000000 { + device_type = "pci"; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + compatible = "ibm,plb-pciex-405ex", "ibm,plb-pciex"; + primary; + port = <0x1>; /* port number */ + reg = <0xc0000000 0x20000000 /* Config space access */ + 0xef001000 0x00001000>; /* Registers */ + dcr-reg = <0x060 0x020>; + sdr-base = <0x440>; + + /* Outbound ranges, one memory and one IO, + * later cannot be changed + */ + ranges = <0x02000000 0x00000000 0x80000000 0x98000000 0x00000000 0x08000000 + 0x01000000 0x00000000 0x00000000 0xe0010000 0x00000000 0x00010000>; + + /* Inbound 2GB range starting at 0 */ + dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x80000000>; + + /* This drives busses 0x40 to 0x7f */ + bus-range = <0x40 0x7f>; + + /* Legacy interrupts (note the weird polarity, the bridge seems + * to invert PCIe legacy interrupts). + * We are de-swizzling here because the numbers are actually for + * port of the root complex virtual P2P bridge. But I want + * to avoid putting a node for it in the tree, so the numbers + * below are basically de-swizzled numbers. + * The real slot is on idsel 0, so the swizzling is 1:1 + */ + interrupt-map-mask = <0x0 0x0 0x0 0x7>; + interrupt-map = < + 0x0 0x0 0x0 0x1 &UIC2 0xb 0x4 /* swizzled int A */ + 0x0 0x0 0x0 0x2 &UIC2 0xc 0x4 /* swizzled int B */ + 0x0 0x0 0x0 0x3 &UIC2 0xd 0x4 /* swizzled int C */ + 0x0 0x0 0x0 0x4 &UIC2 0xe 0x4 /* swizzled int D */>; + }; + }; +}; diff --git a/arch/powerpc/boot/dts/media5200.dts b/arch/powerpc/boot/dts/media5200.dts new file mode 100644 index 000000000..b5413cb85 --- /dev/null +++ b/arch/powerpc/boot/dts/media5200.dts @@ -0,0 +1,146 @@ +/* + * Freescale Media5200 board Device Tree Source + * + * Copyright 2009 Secret Lab Technologies Ltd. + * Grant Likely <grant.likely@secretlab.ca> + * Steven Cavanagh <scavanagh@secretlab.ca> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +/include/ "mpc5200b.dtsi" + +&gpt0 { fsl,has-wdt; }; + +/ { + model = "fsl,media5200"; + compatible = "fsl,media5200"; + + aliases { + console = &console; + ethernet0 = ð0; + }; + + chosen { + linux,stdout-path = &console; + }; + + cpus { + PowerPC,5200@0 { + timebase-frequency = <33000000>; // 33 MHz, these were configured by U-Boot + bus-frequency = <132000000>; // 132 MHz + clock-frequency = <396000000>; // 396 MHz + }; + }; + + memory { + reg = <0x00000000 0x08000000>; // 128MB RAM + }; + + soc5200@f0000000 { + bus-frequency = <132000000>;// 132 MHz + + psc@2000 { // PSC1 + status = "disabled"; + }; + + psc@2200 { // PSC2 + status = "disabled"; + }; + + psc@2400 { // PSC3 + status = "disabled"; + }; + + psc@2600 { // PSC4 + status = "disabled"; + }; + + psc@2800 { // PSC5 + status = "disabled"; + }; + + // PSC6 in uart mode + console: psc@2c00 { // PSC6 + compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart"; + }; + + ethernet@3000 { + phy-handle = <&phy0>; + }; + + mdio@3000 { + phy0: ethernet-phy@0 { + reg = <0>; + }; + }; + + usb@1000 { + reg = <0x1000 0x100>; + }; + }; + + pci@f0000d00 { + interrupt-map-mask = <0xf800 0 0 7>; + interrupt-map = <0xc000 0 0 1 &media5200_fpga 0 2 // 1st slot + 0xc000 0 0 2 &media5200_fpga 0 3 + 0xc000 0 0 3 &media5200_fpga 0 4 + 0xc000 0 0 4 &media5200_fpga 0 5 + + 0xc800 0 0 1 &media5200_fpga 0 3 // 2nd slot + 0xc800 0 0 2 &media5200_fpga 0 4 + 0xc800 0 0 3 &media5200_fpga 0 5 + 0xc800 0 0 4 &media5200_fpga 0 2 + + 0xd000 0 0 1 &media5200_fpga 0 4 // miniPCI + 0xd000 0 0 2 &media5200_fpga 0 5 + + 0xe000 0 0 1 &media5200_fpga 0 5 // CoralIP + >; + ranges = <0x42000000 0 0x80000000 0x80000000 0 0x20000000 + 0x02000000 0 0xa0000000 0xa0000000 0 0x10000000 + 0x01000000 0 0x00000000 0xb0000000 0 0x01000000>; + interrupt-parent = <&mpc5200_pic>; + }; + + localbus { + ranges = < 0 0 0xfc000000 0x02000000 + 1 0 0xfe000000 0x02000000 + 2 0 0xf0010000 0x00010000 + 3 0 0xf0020000 0x00010000 >; + flash@0,0 { + compatible = "amd,am29lv28ml", "cfi-flash"; + reg = <0 0x0 0x2000000>; // 32 MB + bank-width = <4>; // Width in bytes of the flash bank + device-width = <2>; // Two devices on each bank + }; + + flash@1,0 { + compatible = "amd,am29lv28ml", "cfi-flash"; + reg = <1 0 0x2000000>; // 32 MB + bank-width = <4>; // Width in bytes of the flash bank + device-width = <2>; // Two devices on each bank + }; + + media5200_fpga: fpga@2,0 { + compatible = "fsl,media5200-fpga"; + interrupt-controller; + #interrupt-cells = <2>; // 0:bank 1:id; no type field + reg = <2 0 0x10000>; + + interrupt-parent = <&mpc5200_pic>; + interrupts = <0 0 3 // IRQ bank 0 + 1 1 3>; // IRQ bank 1 + }; + + uart@3,0 { + compatible = "ti,tl16c752bpt"; + reg = <3 0 0x10000>; + interrupt-parent = <&media5200_fpga>; + interrupts = <0 0 0 1>; // 2 irqs + }; + }; +}; diff --git a/arch/powerpc/boot/dts/mgcoge.dts b/arch/powerpc/boot/dts/mgcoge.dts new file mode 100644 index 000000000..d72fb5e21 --- /dev/null +++ b/arch/powerpc/boot/dts/mgcoge.dts @@ -0,0 +1,264 @@ +/* + * Device Tree for the MGCOGE plattform from keymile + * + * Copyright 2008 DENX Software Engineering GmbH + * Heiko Schocher <hs@denx.de> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +/dts-v1/; +/ { + model = "MGCOGE"; + compatible = "keymile,km82xx"; + #address-cells = <1>; + #size-cells = <1>; + + aliases { + ethernet0 = ð0; + serial0 = &smc2; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + PowerPC,8247@0 { + device_type = "cpu"; + reg = <0>; + d-cache-line-size = <32>; + i-cache-line-size = <32>; + d-cache-size = <16384>; + i-cache-size = <16384>; + timebase-frequency = <0>; /* Filled in by U-Boot */ + clock-frequency = <0>; /* Filled in by U-Boot */ + bus-frequency = <0>; /* Filled in by U-Boot */ + }; + }; + + localbus@f0010100 { + compatible = "fsl,mpc8247-localbus", + "fsl,pq2-localbus", + "simple-bus"; + #address-cells = <2>; + #size-cells = <1>; + reg = <0xf0010100 0x40>; + + ranges = <0 0 0xfe000000 0x00400000 + 1 0 0x30000000 0x00010000 + 2 0 0x40000000 0x00010000 + 5 0 0x50000000 0x04000000 + >; + + flash@0,0 { + compatible = "cfi-flash"; + reg = <0 0x0 0x400000>; + #address-cells = <1>; + #size-cells = <1>; + bank-width = <1>; + device-width = <1>; + partition@0 { + label = "u-boot"; + reg = <0x00000 0xC0000>; + }; + partition@1 { + label = "env"; + reg = <0xC0000 0x20000>; + }; + partition@2 { + label = "envred"; + reg = <0xE0000 0x20000>; + }; + partition@3 { + label = "free"; + reg = <0x100000 0x300000>; + }; + }; + + flash@5,0 { + compatible = "cfi-flash"; + reg = <5 0x00000000 0x02000000 + 5 0x02000000 0x02000000>; + #address-cells = <1>; + #size-cells = <1>; + bank-width = <2>; + partition@app { /* 64 MBytes */ + label = "ubi0"; + reg = <0x00000000 0x04000000>; + }; + }; + }; + + memory { + device_type = "memory"; + reg = <0 0>; /* Filled in by U-Boot */ + }; + + soc@f0000000 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,mpc8247-immr", "fsl,pq2-soc", "simple-bus"; + ranges = <0x00000000 0xf0000000 0x00053000>; + + // Temporary until code stops depending on it. + device_type = "soc"; + + cpm@119c0 { + #address-cells = <1>; + #size-cells = <1>; + #interrupt-cells = <2>; + compatible = "fsl,mpc8247-cpm", "fsl,cpm2", + "simple-bus"; + reg = <0x119c0 0x30>; + ranges; + + muram { + compatible = "fsl,cpm-muram"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0 0x10000>; + + data@0 { + compatible = "fsl,cpm-muram-data"; + reg = <0x80 0x1f80 0x9800 0x800>; + }; + }; + + brg@119f0 { + compatible = "fsl,mpc8247-brg", + "fsl,cpm2-brg", + "fsl,cpm-brg"; + reg = <0x119f0 0x10 0x115f0 0x10>; + }; + + /* Monitor port/SMC2 */ + smc2: serial@11a90 { + device_type = "serial"; + compatible = "fsl,mpc8247-smc-uart", + "fsl,cpm2-smc-uart"; + reg = <0x11a90 0x20 0x88fc 0x02>; + interrupts = <5 8>; + interrupt-parent = <&PIC>; + fsl,cpm-brg = <2>; + fsl,cpm-command = <0x21200000>; + current-speed = <0>; /* Filled in by U-Boot */ + }; + + eth0: ethernet@11a60 { + device_type = "network"; + compatible = "fsl,mpc8247-scc-enet", + "fsl,cpm2-scc-enet"; + reg = <0x11a60 0x20 0x8300 0x100 0x11390 1>; + local-mac-address = [ 00 00 00 00 00 00 ]; /* Filled in by U-Boot */ + interrupts = <43 8>; + interrupt-parent = <&PIC>; + linux,network-index = <0>; + fsl,cpm-command = <0xce00000>; + fixed-link = <0 0 10 0 0>; + }; + + i2c@11860 { + compatible = "fsl,mpc8272-i2c", + "fsl,cpm2-i2c"; + reg = <0x11860 0x20 0x8afc 0x2>; + interrupts = <1 8>; + interrupt-parent = <&PIC>; + fsl,cpm-command = <0x29600000>; + #address-cells = <1>; + #size-cells = <0>; + }; + + mdio@10d40 { + compatible = "fsl,cpm2-mdio-bitbang"; + reg = <0x10d00 0x14>; + #address-cells = <1>; + #size-cells = <0>; + fsl,mdio-pin = <12>; + fsl,mdc-pin = <13>; + + phy0: ethernet-phy@0 { + reg = <0x0>; + }; + + phy1: ethernet-phy@1 { + reg = <0x1>; + }; + }; + + /* FCC1 management to switch */ + ethernet@11300 { + device_type = "network"; + compatible = "fsl,cpm2-fcc-enet"; + reg = <0x11300 0x20 0x8400 0x100 0x11390 0x1>; + local-mac-address = [ 00 01 02 03 04 07 ]; + interrupts = <32 8>; + interrupt-parent = <&PIC>; + phy-handle = <&phy0>; + linux,network-index = <1>; + fsl,cpm-command = <0x12000300>; + }; + + /* FCC2 to redundant core unit over backplane */ + ethernet@11320 { + device_type = "network"; + compatible = "fsl,cpm2-fcc-enet"; + reg = <0x11320 0x20 0x8500 0x100 0x113b0 0x1>; + local-mac-address = [ 00 01 02 03 04 08 ]; + interrupts = <33 8>; + interrupt-parent = <&PIC>; + phy-handle = <&phy1>; + linux,network-index = <2>; + fsl,cpm-command = <0x16200300>; + }; + + usb@11b60 { + compatible = "fsl,mpc8272-cpm-usb"; + mode = "peripheral"; + reg = <0x11b60 0x40 0x8b00 0x100>; + interrupts = <11 8>; + interrupt-parent = <&PIC>; + usb-clock = <5>; + }; + spi@11aa0 { + cell-index = <0>; + compatible = "fsl,spi", "fsl,cpm2-spi"; + reg = <0x11a80 0x40 0x89fc 0x2>; + interrupts = <2 8>; + interrupt-parent = <&PIC>; + gpios = < &cpm2_pio_d 19 0>; + #address-cells = <1>; + #size-cells = <0>; + ds3106@1 { + compatible = "gen,spidev"; + reg = <0>; + spi-max-frequency = <8000000>; + }; + }; + + }; + + cpm2_pio_d: gpio-controller@10d60 { + #gpio-cells = <2>; + compatible = "fsl,cpm2-pario-bank"; + reg = <0x10d60 0x14>; + gpio-controller; + }; + + cpm2_pio_c: gpio-controller@10d40 { + #gpio-cells = <2>; + compatible = "fsl,cpm2-pario-bank"; + reg = <0x10d40 0x14>; + gpio-controller; + }; + + PIC: interrupt-controller@10c00 { + #interrupt-cells = <2>; + interrupt-controller; + reg = <0x10c00 0x80>; + compatible = "fsl,mpc8247-pic", "fsl,pq2-pic"; + }; + }; +}; diff --git a/arch/powerpc/boot/dts/motionpro.dts b/arch/powerpc/boot/dts/motionpro.dts new file mode 100644 index 000000000..bbabd9749 --- /dev/null +++ b/arch/powerpc/boot/dts/motionpro.dts @@ -0,0 +1,136 @@ +/* + * Motion-PRO board Device Tree Source + * + * Copyright (C) 2007 Semihalf + * Marian Balakowicz <m8@semihalf.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +/include/ "mpc5200b.dtsi" + +&gpt0 { fsl,has-wdt; }; +&gpt6 { // Motion-PRO status LED + compatible = "promess,motionpro-led"; + label = "motionpro-statusled"; + blink-delay = <100>; // 100 msec +}; +&gpt7 { // Motion-PRO ready LED + compatible = "promess,motionpro-led"; + label = "motionpro-readyled"; +}; + +/ { + model = "promess,motionpro"; + compatible = "promess,motionpro"; + + soc5200@f0000000 { + can@900 { + status = "disabled"; + }; + + psc@2000 { // PSC1 + compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart"; + }; + + // PSC2 in spi master mode + psc@2200 { // PSC2 + compatible = "fsl,mpc5200b-psc-spi","fsl,mpc5200-psc-spi"; + cell-index = <1>; + }; + + psc@2400 { // PSC3 + status = "disabled"; + }; + + psc@2600 { // PSC4 + status = "disabled"; + }; + + psc@2800 { // PSC5 + compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart"; + }; + + psc@2c00 { // PSC6 + status = "disabled"; + }; + + ethernet@3000 { + phy-handle = <&phy0>; + }; + + mdio@3000 { + phy0: ethernet-phy@2 { + reg = <2>; + }; + }; + + i2c@3d00 { + status = "disabled"; + }; + + i2c@3d40 { + rtc@68 { + compatible = "dallas,ds1339"; + reg = <0x68>; + }; + }; + + sram@8000 { + compatible = "fsl,mpc5200b-sram","fsl,mpc5200-sram"; + reg = <0x8000 0x4000>; + }; + }; + + pci@f0000d00 { + status = "disabled"; + }; + + localbus { + ranges = <0 0 0xff000000 0x01000000 + 1 0 0x50000000 0x00010000 + 2 0 0x50010000 0x00010000 + 3 0 0x50020000 0x00010000>; + + // 8-bit DualPort SRAM on LocalPlus Bus CS1 + kollmorgen@1,0 { + compatible = "promess,motionpro-kollmorgen"; + reg = <1 0 0x10000>; + interrupts = <1 1 0>; + }; + + // 8-bit board CPLD on LocalPlus Bus CS2 + cpld@2,0 { + compatible = "promess,motionpro-cpld"; + reg = <2 0 0x10000>; + }; + + // 8-bit custom Anybus Module on LocalPlus Bus CS3 + anybus@3,0 { + compatible = "promess,motionpro-anybus"; + reg = <3 0 0x10000>; + }; + pro_module_general@3,0 { + compatible = "promess,pro_module_general"; + reg = <3 0 3>; + }; + pro_module_dio@3,800 { + compatible = "promess,pro_module_dio"; + reg = <3 0x800 2>; + }; + + // 16-bit flash device at LocalPlus Bus CS0 + flash@0,0 { + compatible = "cfi-flash"; + reg = <0 0 0x01000000>; + bank-width = <2>; + device-width = <2>; + #size-cells = <1>; + #address-cells = <1>; + }; + + }; +}; diff --git a/arch/powerpc/boot/dts/mpc5121.dtsi b/arch/powerpc/boot/dts/mpc5121.dtsi new file mode 100644 index 000000000..7f9d14f5c --- /dev/null +++ b/arch/powerpc/boot/dts/mpc5121.dtsi @@ -0,0 +1,523 @@ +/* + * base MPC5121 Device Tree Source + * + * Copyright 2007-2008 Freescale Semiconductor Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#include <dt-bindings/clock/mpc512x-clock.h> + +/dts-v1/; + +/ { + model = "mpc5121"; + compatible = "fsl,mpc5121"; + #address-cells = <1>; + #size-cells = <1>; + interrupt-parent = <&ipic>; + + aliases { + ethernet0 = ð0; + pci = &pci; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + PowerPC,5121@0 { + device_type = "cpu"; + reg = <0>; + d-cache-line-size = <0x20>; /* 32 bytes */ + i-cache-line-size = <0x20>; /* 32 bytes */ + d-cache-size = <0x8000>; /* L1, 32K */ + i-cache-size = <0x8000>; /* L1, 32K */ + timebase-frequency = <49500000>;/* 49.5 MHz (csb/4) */ + bus-frequency = <198000000>; /* 198 MHz csb bus */ + clock-frequency = <396000000>; /* 396 MHz ppc core */ + }; + }; + + memory { + device_type = "memory"; + reg = <0x00000000 0x10000000>; /* 256MB at 0 */ + }; + + mbx@20000000 { + compatible = "fsl,mpc5121-mbx"; + reg = <0x20000000 0x4000>; + interrupts = <66 0x8>; + clocks = <&clks MPC512x_CLK_MBX_BUS>, + <&clks MPC512x_CLK_MBX_3D>, + <&clks MPC512x_CLK_MBX>; + clock-names = "mbx-bus", "mbx-3d", "mbx"; + }; + + sram@30000000 { + compatible = "fsl,mpc5121-sram"; + reg = <0x30000000 0x20000>; /* 128K at 0x30000000 */ + }; + + nfc@40000000 { + compatible = "fsl,mpc5121-nfc"; + reg = <0x40000000 0x100000>; /* 1M at 0x40000000 */ + interrupts = <6 8>; + #address-cells = <1>; + #size-cells = <1>; + clocks = <&clks MPC512x_CLK_NFC>; + clock-names = "ipg"; + }; + + localbus@80000020 { + compatible = "fsl,mpc5121-localbus"; + #address-cells = <2>; + #size-cells = <1>; + reg = <0x80000020 0x40>; + interrupts = <7 0x8>; + ranges = <0x0 0x0 0xfc000000 0x04000000>; + }; + + clocks { + #address-cells = <1>; + #size-cells = <0>; + + osc: osc { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <33000000>; + }; + }; + + soc@80000000 { + compatible = "fsl,mpc5121-immr"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x80000000 0x400000>; + reg = <0x80000000 0x400000>; + bus-frequency = <66000000>; /* 66 MHz ips bus */ + + + /* + * IPIC + * interrupts cell = <intr #, sense> + * sense values match linux IORESOURCE_IRQ_* defines: + * sense == 8: Level, low assertion + * sense == 2: Edge, high-to-low change + */ + ipic: interrupt-controller@c00 { + compatible = "fsl,mpc5121-ipic", "fsl,ipic"; + interrupt-controller; + #address-cells = <0>; + #interrupt-cells = <2>; + reg = <0xc00 0x100>; + }; + + /* Watchdog timer */ + wdt@900 { + compatible = "fsl,mpc5121-wdt"; + reg = <0x900 0x100>; + }; + + /* Real time clock */ + rtc@a00 { + compatible = "fsl,mpc5121-rtc"; + reg = <0xa00 0x100>; + interrupts = <79 0x8 80 0x8>; + }; + + /* Reset module */ + reset@e00 { + compatible = "fsl,mpc5121-reset"; + reg = <0xe00 0x100>; + }; + + /* Clock control */ + clks: clock@f00 { + compatible = "fsl,mpc5121-clock"; + reg = <0xf00 0x100>; + #clock-cells = <1>; + clocks = <&osc>; + clock-names = "osc"; + }; + + /* Power Management Controller */ + pmc@1000{ + compatible = "fsl,mpc5121-pmc"; + reg = <0x1000 0x100>; + interrupts = <83 0x8>; + }; + + gpio@1100 { + compatible = "fsl,mpc5121-gpio"; + reg = <0x1100 0x100>; + interrupts = <78 0x8>; + }; + + can@1300 { + compatible = "fsl,mpc5121-mscan"; + reg = <0x1300 0x80>; + interrupts = <12 0x8>; + clocks = <&clks MPC512x_CLK_BDLC>, + <&clks MPC512x_CLK_IPS>, + <&clks MPC512x_CLK_SYS>, + <&clks MPC512x_CLK_REF>, + <&clks MPC512x_CLK_MSCAN0_MCLK>; + clock-names = "ipg", "ips", "sys", "ref", "mclk"; + }; + + can@1380 { + compatible = "fsl,mpc5121-mscan"; + reg = <0x1380 0x80>; + interrupts = <13 0x8>; + clocks = <&clks MPC512x_CLK_BDLC>, + <&clks MPC512x_CLK_IPS>, + <&clks MPC512x_CLK_SYS>, + <&clks MPC512x_CLK_REF>, + <&clks MPC512x_CLK_MSCAN1_MCLK>; + clock-names = "ipg", "ips", "sys", "ref", "mclk"; + }; + + sdhc@1500 { + compatible = "fsl,mpc5121-sdhc"; + reg = <0x1500 0x100>; + interrupts = <8 0x8>; + dmas = <&dma0 30>; + dma-names = "rx-tx"; + clocks = <&clks MPC512x_CLK_IPS>, + <&clks MPC512x_CLK_SDHC>; + clock-names = "ipg", "per"; + }; + + i2c@1700 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,mpc5121-i2c", "fsl-i2c"; + reg = <0x1700 0x20>; + interrupts = <9 0x8>; + clocks = <&clks MPC512x_CLK_I2C>; + clock-names = "ipg"; + }; + + i2c@1720 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,mpc5121-i2c", "fsl-i2c"; + reg = <0x1720 0x20>; + interrupts = <10 0x8>; + clocks = <&clks MPC512x_CLK_I2C>; + clock-names = "ipg"; + }; + + i2c@1740 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,mpc5121-i2c", "fsl-i2c"; + reg = <0x1740 0x20>; + interrupts = <11 0x8>; + clocks = <&clks MPC512x_CLK_I2C>; + clock-names = "ipg"; + }; + + i2ccontrol@1760 { + compatible = "fsl,mpc5121-i2c-ctrl"; + reg = <0x1760 0x8>; + }; + + axe@2000 { + compatible = "fsl,mpc5121-axe"; + reg = <0x2000 0x100>; + interrupts = <42 0x8>; + clocks = <&clks MPC512x_CLK_AXE>; + clock-names = "ipg"; + }; + + display@2100 { + compatible = "fsl,mpc5121-diu"; + reg = <0x2100 0x100>; + interrupts = <64 0x8>; + clocks = <&clks MPC512x_CLK_DIU>; + clock-names = "ipg"; + }; + + can@2300 { + compatible = "fsl,mpc5121-mscan"; + reg = <0x2300 0x80>; + interrupts = <90 0x8>; + clocks = <&clks MPC512x_CLK_BDLC>, + <&clks MPC512x_CLK_IPS>, + <&clks MPC512x_CLK_SYS>, + <&clks MPC512x_CLK_REF>, + <&clks MPC512x_CLK_MSCAN2_MCLK>; + clock-names = "ipg", "ips", "sys", "ref", "mclk"; + }; + + can@2380 { + compatible = "fsl,mpc5121-mscan"; + reg = <0x2380 0x80>; + interrupts = <91 0x8>; + clocks = <&clks MPC512x_CLK_BDLC>, + <&clks MPC512x_CLK_IPS>, + <&clks MPC512x_CLK_SYS>, + <&clks MPC512x_CLK_REF>, + <&clks MPC512x_CLK_MSCAN3_MCLK>; + clock-names = "ipg", "ips", "sys", "ref", "mclk"; + }; + + viu@2400 { + compatible = "fsl,mpc5121-viu"; + reg = <0x2400 0x400>; + interrupts = <67 0x8>; + clocks = <&clks MPC512x_CLK_VIU>; + clock-names = "ipg"; + }; + + mdio@2800 { + compatible = "fsl,mpc5121-fec-mdio"; + reg = <0x2800 0x800>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&clks MPC512x_CLK_FEC>; + clock-names = "per"; + }; + + eth0: ethernet@2800 { + device_type = "network"; + compatible = "fsl,mpc5121-fec"; + reg = <0x2800 0x800>; + local-mac-address = [ 00 00 00 00 00 00 ]; + interrupts = <4 0x8>; + clocks = <&clks MPC512x_CLK_FEC>; + clock-names = "per"; + }; + + /* USB1 using external ULPI PHY */ + usb@3000 { + compatible = "fsl,mpc5121-usb2-dr"; + reg = <0x3000 0x600>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <43 0x8>; + dr_mode = "otg"; + phy_type = "ulpi"; + clocks = <&clks MPC512x_CLK_USB1>; + clock-names = "ipg"; + }; + + /* USB0 using internal UTMI PHY */ + usb@4000 { + compatible = "fsl,mpc5121-usb2-dr"; + reg = <0x4000 0x600>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <44 0x8>; + dr_mode = "otg"; + phy_type = "utmi_wide"; + clocks = <&clks MPC512x_CLK_USB2>; + clock-names = "ipg"; + }; + + /* IO control */ + ioctl@a000 { + compatible = "fsl,mpc5121-ioctl"; + reg = <0xA000 0x1000>; + }; + + /* LocalPlus controller */ + lpc@10000 { + compatible = "fsl,mpc5121-lpc"; + reg = <0x10000 0x200>; + }; + + pata@10200 { + compatible = "fsl,mpc5121-pata"; + reg = <0x10200 0x100>; + interrupts = <5 0x8>; + clocks = <&clks MPC512x_CLK_PATA>; + clock-names = "ipg"; + }; + + /* 512x PSCs are not 52xx PSC compatible */ + + /* PSC0 */ + psc@11000 { + compatible = "fsl,mpc5121-psc"; + reg = <0x11000 0x100>; + interrupts = <40 0x8>; + fsl,rx-fifo-size = <16>; + fsl,tx-fifo-size = <16>; + clocks = <&clks MPC512x_CLK_PSC0>, + <&clks MPC512x_CLK_PSC0_MCLK>; + clock-names = "ipg", "mclk"; + }; + + /* PSC1 */ + psc@11100 { + compatible = "fsl,mpc5121-psc"; + reg = <0x11100 0x100>; + interrupts = <40 0x8>; + fsl,rx-fifo-size = <16>; + fsl,tx-fifo-size = <16>; + clocks = <&clks MPC512x_CLK_PSC1>, + <&clks MPC512x_CLK_PSC1_MCLK>; + clock-names = "ipg", "mclk"; + }; + + /* PSC2 */ + psc@11200 { + compatible = "fsl,mpc5121-psc"; + reg = <0x11200 0x100>; + interrupts = <40 0x8>; + fsl,rx-fifo-size = <16>; + fsl,tx-fifo-size = <16>; + clocks = <&clks MPC512x_CLK_PSC2>, + <&clks MPC512x_CLK_PSC2_MCLK>; + clock-names = "ipg", "mclk"; + }; + + /* PSC3 */ + psc@11300 { + compatible = "fsl,mpc5121-psc-uart", "fsl,mpc5121-psc"; + reg = <0x11300 0x100>; + interrupts = <40 0x8>; + fsl,rx-fifo-size = <16>; + fsl,tx-fifo-size = <16>; + clocks = <&clks MPC512x_CLK_PSC3>, + <&clks MPC512x_CLK_PSC3_MCLK>; + clock-names = "ipg", "mclk"; + }; + + /* PSC4 */ + psc@11400 { + compatible = "fsl,mpc5121-psc-uart", "fsl,mpc5121-psc"; + reg = <0x11400 0x100>; + interrupts = <40 0x8>; + fsl,rx-fifo-size = <16>; + fsl,tx-fifo-size = <16>; + clocks = <&clks MPC512x_CLK_PSC4>, + <&clks MPC512x_CLK_PSC4_MCLK>; + clock-names = "ipg", "mclk"; + }; + + /* PSC5 */ + psc@11500 { + compatible = "fsl,mpc5121-psc"; + reg = <0x11500 0x100>; + interrupts = <40 0x8>; + fsl,rx-fifo-size = <16>; + fsl,tx-fifo-size = <16>; + clocks = <&clks MPC512x_CLK_PSC5>, + <&clks MPC512x_CLK_PSC5_MCLK>; + clock-names = "ipg", "mclk"; + }; + + /* PSC6 */ + psc@11600 { + compatible = "fsl,mpc5121-psc"; + reg = <0x11600 0x100>; + interrupts = <40 0x8>; + fsl,rx-fifo-size = <16>; + fsl,tx-fifo-size = <16>; + clocks = <&clks MPC512x_CLK_PSC6>, + <&clks MPC512x_CLK_PSC6_MCLK>; + clock-names = "ipg", "mclk"; + }; + + /* PSC7 */ + psc@11700 { + compatible = "fsl,mpc5121-psc"; + reg = <0x11700 0x100>; + interrupts = <40 0x8>; + fsl,rx-fifo-size = <16>; + fsl,tx-fifo-size = <16>; + clocks = <&clks MPC512x_CLK_PSC7>, + <&clks MPC512x_CLK_PSC7_MCLK>; + clock-names = "ipg", "mclk"; + }; + + /* PSC8 */ + psc@11800 { + compatible = "fsl,mpc5121-psc"; + reg = <0x11800 0x100>; + interrupts = <40 0x8>; + fsl,rx-fifo-size = <16>; + fsl,tx-fifo-size = <16>; + clocks = <&clks MPC512x_CLK_PSC8>, + <&clks MPC512x_CLK_PSC8_MCLK>; + clock-names = "ipg", "mclk"; + }; + + /* PSC9 */ + psc@11900 { + compatible = "fsl,mpc5121-psc"; + reg = <0x11900 0x100>; + interrupts = <40 0x8>; + fsl,rx-fifo-size = <16>; + fsl,tx-fifo-size = <16>; + clocks = <&clks MPC512x_CLK_PSC9>, + <&clks MPC512x_CLK_PSC9_MCLK>; + clock-names = "ipg", "mclk"; + }; + + /* PSC10 */ + psc@11a00 { + compatible = "fsl,mpc5121-psc"; + reg = <0x11a00 0x100>; + interrupts = <40 0x8>; + fsl,rx-fifo-size = <16>; + fsl,tx-fifo-size = <16>; + clocks = <&clks MPC512x_CLK_PSC10>, + <&clks MPC512x_CLK_PSC10_MCLK>; + clock-names = "ipg", "mclk"; + }; + + /* PSC11 */ + psc@11b00 { + compatible = "fsl,mpc5121-psc"; + reg = <0x11b00 0x100>; + interrupts = <40 0x8>; + fsl,rx-fifo-size = <16>; + fsl,tx-fifo-size = <16>; + clocks = <&clks MPC512x_CLK_PSC11>, + <&clks MPC512x_CLK_PSC11_MCLK>; + clock-names = "ipg", "mclk"; + }; + + pscfifo@11f00 { + compatible = "fsl,mpc5121-psc-fifo"; + reg = <0x11f00 0x100>; + interrupts = <40 0x8>; + clocks = <&clks MPC512x_CLK_PSC_FIFO>; + clock-names = "ipg"; + }; + + dma0: dma@14000 { + compatible = "fsl,mpc5121-dma"; + reg = <0x14000 0x1800>; + interrupts = <65 0x8>; + #dma-cells = <1>; + }; + }; + + pci: pci@80008500 { + compatible = "fsl,mpc5121-pci"; + device_type = "pci"; + interrupts = <1 0x8>; + clock-frequency = <0>; + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + clocks = <&clks MPC512x_CLK_PCI>; + clock-names = "ipg"; + + reg = <0x80008500 0x100 /* internal registers */ + 0x80008300 0x8>; /* config space access registers */ + bus-range = <0x0 0x0>; + ranges = <0x42000000 0x0 0xa0000000 0xa0000000 0x0 0x10000000 + 0x02000000 0x0 0xb0000000 0xb0000000 0x0 0x10000000 + 0x01000000 0x0 0x00000000 0x84000000 0x0 0x01000000>; + }; +}; diff --git a/arch/powerpc/boot/dts/mpc5121ads.dts b/arch/powerpc/boot/dts/mpc5121ads.dts new file mode 100644 index 000000000..c228a0a23 --- /dev/null +++ b/arch/powerpc/boot/dts/mpc5121ads.dts @@ -0,0 +1,178 @@ +/* + * MPC5121E ADS Device Tree Source + * + * Copyright 2007-2008 Freescale Semiconductor Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#include <mpc5121.dtsi> + +/ { + model = "mpc5121ads"; + compatible = "fsl,mpc5121ads", "fsl,mpc5121"; + + nfc@40000000 { + /* + * ADS has two Hynix 512MB Nand flash chips in a single + * stacked package. + */ + chips = <2>; + + nand@0 { + label = "nand"; + reg = <0x00000000 0x40000000>; /* 512MB + 512MB */ + }; + }; + + localbus@80000020 { + ranges = <0x0 0x0 0xfc000000 0x04000000 + 0x2 0x0 0x82000000 0x00008000>; + + flash@0,0 { + compatible = "cfi-flash"; + reg = <0 0x0 0x4000000>; + #address-cells = <1>; + #size-cells = <1>; + bank-width = <4>; + device-width = <2>; + + protected@0 { + label = "protected"; + reg = <0x00000000 0x00040000>; // first sector is protected + read-only; + }; + filesystem@40000 { + label = "filesystem"; + reg = <0x00040000 0x03c00000>; // 60M for filesystem + }; + kernel@3c40000 { + label = "kernel"; + reg = <0x03c40000 0x00280000>; // 2.5M for kernel + }; + device-tree@3ec0000 { + label = "device-tree"; + reg = <0x03ec0000 0x00040000>; // one sector for device tree + }; + u-boot@3f00000 { + label = "u-boot"; + reg = <0x03f00000 0x00100000>; // 1M for u-boot + read-only; + }; + }; + + board-control@2,0 { + compatible = "fsl,mpc5121ads-cpld"; + reg = <0x2 0x0 0x8000>; + }; + + cpld_pic: pic@2,a { + compatible = "fsl,mpc5121ads-cpld-pic"; + interrupt-controller; + #interrupt-cells = <2>; + reg = <0x2 0xa 0x5>; + /* irq routing: + * all irqs but touch screen are routed to irq0 (ipic 48) + * touch screen is statically routed to irq1 (ipic 17) + * so don't use it here + */ + interrupts = <48 0x8>; + }; + }; + + soc@80000000 { + + i2c@1700 { + fsl,preserve-clocking; + + hwmon@4a { + compatible = "adi,ad7414"; + reg = <0x4a>; + }; + + eeprom@50 { + compatible = "at,24c32"; + reg = <0x50>; + }; + + rtc@68 { + compatible = "stm,m41t62"; + reg = <0x68>; + }; + }; + + eth0: ethernet@2800 { + phy-handle = <&phy0>; + }; + + can@2300 { + status = "disabled"; + }; + + can@2380 { + status = "disabled"; + }; + + viu@2400 { + status = "disabled"; + }; + + mdio@2800 { + phy0: ethernet-phy@0 { + reg = <1>; + }; + }; + + /* mpc5121ads only uses USB0 */ + usb@3000 { + status = "disabled"; + }; + + /* USB0 using internal UTMI PHY */ + usb@4000 { + dr_mode = "host"; + fsl,invert-drvvbus; + fsl,invert-pwr-fault; + }; + + /* PSC3 serial port A aka ttyPSC0 */ + psc@11300 { + compatible = "fsl,mpc5121-psc-uart", "fsl,mpc5121-psc"; + }; + + /* PSC4 serial port B aka ttyPSC1 */ + psc@11400 { + compatible = "fsl,mpc5121-psc-uart", "fsl,mpc5121-psc"; + }; + + /* PSC5 in ac97 mode */ + ac97: psc@11500 { + compatible = "fsl,mpc5121-psc-ac97", "fsl,mpc5121-psc"; + fsl,mode = "ac97-slave"; + fsl,rx-fifo-size = <384>; + fsl,tx-fifo-size = <384>; + }; + }; + + pci: pci@80008500 { + interrupt-map-mask = <0xf800 0x0 0x0 0x7>; + interrupt-map = < + /* IDSEL 0x15 - Slot 1 PCI */ + 0xa800 0x0 0x0 0x1 &cpld_pic 0x0 0x8 + 0xa800 0x0 0x0 0x2 &cpld_pic 0x1 0x8 + 0xa800 0x0 0x0 0x3 &cpld_pic 0x2 0x8 + 0xa800 0x0 0x0 0x4 &cpld_pic 0x3 0x8 + + /* IDSEL 0x16 - Slot 2 MiniPCI */ + 0xb000 0x0 0x0 0x1 &cpld_pic 0x4 0x8 + 0xb000 0x0 0x0 0x2 &cpld_pic 0x5 0x8 + + /* IDSEL 0x17 - Slot 3 MiniPCI */ + 0xb800 0x0 0x0 0x1 &cpld_pic 0x6 0x8 + 0xb800 0x0 0x0 0x2 &cpld_pic 0x7 0x8 + >; + }; +}; diff --git a/arch/powerpc/boot/dts/mpc5125twr.dts b/arch/powerpc/boot/dts/mpc5125twr.dts new file mode 100644 index 000000000..e4f297471 --- /dev/null +++ b/arch/powerpc/boot/dts/mpc5125twr.dts @@ -0,0 +1,288 @@ +/* + * STx/Freescale ADS5125 MPC5125 silicon + * + * Copyright (C) 2009 Freescale Semiconductor Inc. All rights reserved. + * + * Reworked by Matteo Facchinetti (engineering@sirius-es.it) + * Copyright (C) 2013 Sirius Electronic Systems + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#include <dt-bindings/clock/mpc512x-clock.h> + +/dts-v1/; + +/ { + model = "mpc5125twr"; // In BSP "mpc5125ads" + compatible = "fsl,mpc5125ads", "fsl,mpc5125"; + #address-cells = <1>; + #size-cells = <1>; + interrupt-parent = <&ipic>; + + aliases { + gpio0 = &gpio0; + gpio1 = &gpio1; + ethernet0 = ð0; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + PowerPC,5125@0 { + device_type = "cpu"; + reg = <0>; + d-cache-line-size = <0x20>; // 32 bytes + i-cache-line-size = <0x20>; // 32 bytes + d-cache-size = <0x8000>; // L1, 32K + i-cache-size = <0x8000>; // L1, 32K + timebase-frequency = <49500000>;// 49.5 MHz (csb/4) + bus-frequency = <198000000>; // 198 MHz csb bus + clock-frequency = <396000000>; // 396 MHz ppc core + }; + }; + + memory { + device_type = "memory"; + reg = <0x00000000 0x10000000>; // 256MB at 0 + }; + + sram@30000000 { + compatible = "fsl,mpc5121-sram"; + reg = <0x30000000 0x08000>; // 32K at 0x30000000 + }; + + clocks { + #address-cells = <1>; + #size-cells = <0>; + + osc: osc { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <33000000>; + }; + }; + + soc@80000000 { + compatible = "fsl,mpc5121-immr"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x80000000 0x400000>; + reg = <0x80000000 0x400000>; + bus-frequency = <66000000>; // 66 MHz ips bus + + // IPIC + // interrupts cell = <intr #, sense> + // sense values match linux IORESOURCE_IRQ_* defines: + // sense == 8: Level, low assertion + // sense == 2: Edge, high-to-low change + // + ipic: interrupt-controller@c00 { + compatible = "fsl,mpc5121-ipic", "fsl,ipic"; + interrupt-controller; + #address-cells = <0>; + #interrupt-cells = <2>; + reg = <0xc00 0x100>; + }; + + rtc@a00 { // Real time clock + compatible = "fsl,mpc5121-rtc"; + reg = <0xa00 0x100>; + interrupts = <79 0x8 80 0x8>; + }; + + reset@e00 { // Reset module + compatible = "fsl,mpc5125-reset"; + reg = <0xe00 0x100>; + }; + + clks: clock@f00 { // Clock control + compatible = "fsl,mpc5121-clock"; + reg = <0xf00 0x100>; + #clock-cells = <1>; + clocks = <&osc>; + clock-names = "osc"; + }; + + pmc@1000{ // Power Management Controller + compatible = "fsl,mpc5121-pmc"; + reg = <0x1000 0x100>; + interrupts = <83 0x2>; + }; + + gpio0: gpio@1100 { + compatible = "fsl,mpc5125-gpio"; + reg = <0x1100 0x080>; + interrupts = <78 0x8>; + }; + + gpio1: gpio@1180 { + compatible = "fsl,mpc5125-gpio"; + reg = <0x1180 0x080>; + interrupts = <86 0x8>; + }; + + can@1300 { // CAN rev.2 + compatible = "fsl,mpc5121-mscan"; + interrupts = <12 0x8>; + reg = <0x1300 0x80>; + clocks = <&clks MPC512x_CLK_BDLC>, + <&clks MPC512x_CLK_IPS>, + <&clks MPC512x_CLK_SYS>, + <&clks MPC512x_CLK_REF>, + <&clks MPC512x_CLK_MSCAN0_MCLK>; + clock-names = "ipg", "ips", "sys", "ref", "mclk"; + }; + + can@1380 { + compatible = "fsl,mpc5121-mscan"; + interrupts = <13 0x8>; + reg = <0x1380 0x80>; + clocks = <&clks MPC512x_CLK_BDLC>, + <&clks MPC512x_CLK_IPS>, + <&clks MPC512x_CLK_SYS>, + <&clks MPC512x_CLK_REF>, + <&clks MPC512x_CLK_MSCAN1_MCLK>; + clock-names = "ipg", "ips", "sys", "ref", "mclk"; + }; + + sdhc@1500 { + compatible = "fsl,mpc5121-sdhc"; + interrupts = <8 0x8>; + reg = <0x1500 0x100>; + clocks = <&clks MPC512x_CLK_IPS>, + <&clks MPC512x_CLK_SDHC>; + clock-names = "ipg", "per"; + }; + + i2c@1700 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,mpc5121-i2c", "fsl-i2c"; + reg = <0x1700 0x20>; + interrupts = <0x9 0x8>; + clocks = <&clks MPC512x_CLK_I2C>; + clock-names = "ipg"; + }; + + i2c@1720 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,mpc5121-i2c", "fsl-i2c"; + reg = <0x1720 0x20>; + interrupts = <0xa 0x8>; + clocks = <&clks MPC512x_CLK_I2C>; + clock-names = "ipg"; + }; + + i2c@1740 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,mpc5121-i2c", "fsl-i2c"; + reg = <0x1740 0x20>; + interrupts = <0xb 0x8>; + clocks = <&clks MPC512x_CLK_I2C>; + clock-names = "ipg"; + }; + + i2ccontrol@1760 { + compatible = "fsl,mpc5121-i2c-ctrl"; + reg = <0x1760 0x8>; + }; + + diu@2100 { + compatible = "fsl,mpc5121-diu"; + reg = <0x2100 0x100>; + interrupts = <64 0x8>; + clocks = <&clks MPC512x_CLK_DIU>; + clock-names = "ipg"; + }; + + mdio@2800 { + compatible = "fsl,mpc5121-fec-mdio"; + reg = <0x2800 0x800>; + #address-cells = <1>; + #size-cells = <0>; + phy0: ethernet-phy@0 { + reg = <1>; + }; + }; + + eth0: ethernet@2800 { + compatible = "fsl,mpc5125-fec"; + reg = <0x2800 0x800>; + local-mac-address = [ 00 00 00 00 00 00 ]; + interrupts = <4 0x8>; + phy-handle = < &phy0 >; + phy-connection-type = "rmii"; + clocks = <&clks MPC512x_CLK_FEC>; + clock-names = "per"; + }; + + // IO control + ioctl@a000 { + compatible = "fsl,mpc5125-ioctl"; + reg = <0xA000 0x1000>; + }; + + // disable USB1 port + // TODO: + // correct pinmux config and fix USB3320 ulpi dependency + // before re-enabling it + usb@3000 { + compatible = "fsl,mpc5121-usb2-dr"; + reg = <0x3000 0x400>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <43 0x8>; + dr_mode = "host"; + phy_type = "ulpi"; + clocks = <&clks MPC512x_CLK_USB1>; + clock-names = "ipg"; + status = "disabled"; + }; + + // 5125 PSCs are not 52xx or 5121 PSC compatible + // PSC1 uart0 aka ttyPSC0 + serial@11100 { + compatible = "fsl,mpc5125-psc-uart", "fsl,mpc5125-psc"; + reg = <0x11100 0x100>; + interrupts = <40 0x8>; + fsl,rx-fifo-size = <16>; + fsl,tx-fifo-size = <16>; + clocks = <&clks MPC512x_CLK_PSC1>, + <&clks MPC512x_CLK_PSC1_MCLK>; + clock-names = "ipg", "mclk"; + }; + + // PSC9 uart1 aka ttyPSC1 + serial@11900 { + compatible = "fsl,mpc5125-psc-uart", "fsl,mpc5125-psc"; + reg = <0x11900 0x100>; + interrupts = <40 0x8>; + fsl,rx-fifo-size = <16>; + fsl,tx-fifo-size = <16>; + clocks = <&clks MPC512x_CLK_PSC9>, + <&clks MPC512x_CLK_PSC9_MCLK>; + clock-names = "ipg", "mclk"; + }; + + pscfifo@11f00 { + compatible = "fsl,mpc5121-psc-fifo"; + reg = <0x11f00 0x100>; + interrupts = <40 0x8>; + clocks = <&clks MPC512x_CLK_PSC_FIFO>; + clock-names = "ipg"; + }; + + dma@14000 { + compatible = "fsl,mpc5121-dma"; // BSP name: "mpc512x-dma2" + reg = <0x14000 0x1800>; + interrupts = <65 0x8>; + }; + }; +}; diff --git a/arch/powerpc/boot/dts/mpc5200b.dtsi b/arch/powerpc/boot/dts/mpc5200b.dtsi new file mode 100644 index 000000000..969b2200b --- /dev/null +++ b/arch/powerpc/boot/dts/mpc5200b.dtsi @@ -0,0 +1,292 @@ +/* + * base MPC5200b Device Tree Source + * + * Copyright (C) 2010 SecretLab + * Grant Likely <grant@secretlab.ca> + * John Bonesio <bones@secretlab.ca> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +/dts-v1/; + +/ { + model = "fsl,mpc5200b"; + compatible = "fsl,mpc5200b"; + #address-cells = <1>; + #size-cells = <1>; + interrupt-parent = <&mpc5200_pic>; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + powerpc: PowerPC,5200@0 { + device_type = "cpu"; + reg = <0>; + d-cache-line-size = <32>; + i-cache-line-size = <32>; + d-cache-size = <0x4000>; // L1, 16K + i-cache-size = <0x4000>; // L1, 16K + timebase-frequency = <0>; // from bootloader + bus-frequency = <0>; // from bootloader + clock-frequency = <0>; // from bootloader + }; + }; + + memory: memory { + device_type = "memory"; + reg = <0x00000000 0x04000000>; // 64MB + }; + + soc: soc5200@f0000000 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,mpc5200b-immr"; + ranges = <0 0xf0000000 0x0000c000>; + reg = <0xf0000000 0x00000100>; + bus-frequency = <0>; // from bootloader + system-frequency = <0>; // from bootloader + + cdm@200 { + compatible = "fsl,mpc5200b-cdm","fsl,mpc5200-cdm"; + reg = <0x200 0x38>; + }; + + mpc5200_pic: interrupt-controller@500 { + // 5200 interrupts are encoded into two levels; + interrupt-controller; + #interrupt-cells = <3>; + compatible = "fsl,mpc5200b-pic","fsl,mpc5200-pic"; + reg = <0x500 0x80>; + }; + + gpt0: timer@600 { // General Purpose Timer + compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt"; + #gpio-cells = <2>; // Add 'gpio-controller;' to enable gpio mode + reg = <0x600 0x10>; + interrupts = <1 9 0>; + // add 'fsl,has-wdt' to enable watchdog + }; + + gpt1: timer@610 { // General Purpose Timer + compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt"; + #gpio-cells = <2>; // Add 'gpio-controller;' to enable gpio mode + reg = <0x610 0x10>; + interrupts = <1 10 0>; + }; + + gpt2: timer@620 { // General Purpose Timer + compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt"; + #gpio-cells = <2>; // Add 'gpio-controller;' to enable gpio mode + reg = <0x620 0x10>; + interrupts = <1 11 0>; + }; + + gpt3: timer@630 { // General Purpose Timer + compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt"; + #gpio-cells = <2>; // Add 'gpio-controller;' to enable gpio mode + reg = <0x630 0x10>; + interrupts = <1 12 0>; + }; + + gpt4: timer@640 { // General Purpose Timer + compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt"; + #gpio-cells = <2>; // Add 'gpio-controller;' to enable gpio mode + reg = <0x640 0x10>; + interrupts = <1 13 0>; + }; + + gpt5: timer@650 { // General Purpose Timer + compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt"; + #gpio-cells = <2>; // Add 'gpio-controller;' to enable gpio mode + reg = <0x650 0x10>; + interrupts = <1 14 0>; + }; + + gpt6: timer@660 { // General Purpose Timer + compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt"; + #gpio-cells = <2>; // Add 'gpio-controller;' to enable gpio mode + reg = <0x660 0x10>; + interrupts = <1 15 0>; + }; + + gpt7: timer@670 { // General Purpose Timer + compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt"; + #gpio-cells = <2>; // Add 'gpio-controller;' to enable gpio mode + reg = <0x670 0x10>; + interrupts = <1 16 0>; + }; + + rtc@800 { // Real time clock + compatible = "fsl,mpc5200b-rtc","fsl,mpc5200-rtc"; + reg = <0x800 0x100>; + interrupts = <1 5 0 1 6 0>; + }; + + can@900 { + compatible = "fsl,mpc5200b-mscan","fsl,mpc5200-mscan"; + interrupts = <2 17 0>; + reg = <0x900 0x80>; + }; + + can@980 { + compatible = "fsl,mpc5200b-mscan","fsl,mpc5200-mscan"; + interrupts = <2 18 0>; + reg = <0x980 0x80>; + }; + + gpio_simple: gpio@b00 { + compatible = "fsl,mpc5200b-gpio","fsl,mpc5200-gpio"; + reg = <0xb00 0x40>; + interrupts = <1 7 0>; + gpio-controller; + #gpio-cells = <2>; + }; + + gpio_wkup: gpio@c00 { + compatible = "fsl,mpc5200b-gpio-wkup","fsl,mpc5200-gpio-wkup"; + reg = <0xc00 0x40>; + interrupts = <1 8 0 0 3 0>; + gpio-controller; + #gpio-cells = <2>; + }; + + spi@f00 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,mpc5200b-spi","fsl,mpc5200-spi"; + reg = <0xf00 0x20>; + interrupts = <2 13 0 2 14 0>; + }; + + usb: usb@1000 { + compatible = "fsl,mpc5200b-ohci","fsl,mpc5200-ohci","ohci-be"; + reg = <0x1000 0xff>; + interrupts = <2 6 0>; + }; + + dma-controller@1200 { + compatible = "fsl,mpc5200b-bestcomm","fsl,mpc5200-bestcomm"; + reg = <0x1200 0x80>; + interrupts = <3 0 0 3 1 0 3 2 0 3 3 0 + 3 4 0 3 5 0 3 6 0 3 7 0 + 3 8 0 3 9 0 3 10 0 3 11 0 + 3 12 0 3 13 0 3 14 0 3 15 0>; + }; + + xlb@1f00 { + compatible = "fsl,mpc5200b-xlb","fsl,mpc5200-xlb"; + reg = <0x1f00 0x100>; + }; + + psc1: psc@2000 { // PSC1 + compatible = "fsl,mpc5200b-psc","fsl,mpc5200-psc"; + reg = <0x2000 0x100>; + interrupts = <2 1 0>; + }; + + psc2: psc@2200 { // PSC2 + compatible = "fsl,mpc5200b-psc","fsl,mpc5200-psc"; + reg = <0x2200 0x100>; + interrupts = <2 2 0>; + }; + + psc3: psc@2400 { // PSC3 + compatible = "fsl,mpc5200b-psc","fsl,mpc5200-psc"; + reg = <0x2400 0x100>; + interrupts = <2 3 0>; + }; + + psc4: psc@2600 { // PSC4 + compatible = "fsl,mpc5200b-psc","fsl,mpc5200-psc"; + reg = <0x2600 0x100>; + interrupts = <2 11 0>; + }; + + psc5: psc@2800 { // PSC5 + compatible = "fsl,mpc5200b-psc","fsl,mpc5200-psc"; + reg = <0x2800 0x100>; + interrupts = <2 12 0>; + }; + + psc6: psc@2c00 { // PSC6 + compatible = "fsl,mpc5200b-psc","fsl,mpc5200-psc"; + reg = <0x2c00 0x100>; + interrupts = <2 4 0>; + }; + + eth0: ethernet@3000 { + compatible = "fsl,mpc5200b-fec","fsl,mpc5200-fec"; + reg = <0x3000 0x400>; + local-mac-address = [ 00 00 00 00 00 00 ]; + interrupts = <2 5 0>; + }; + + mdio@3000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,mpc5200b-mdio","fsl,mpc5200-mdio"; + reg = <0x3000 0x400>; // fec range, since we need to setup fec interrupts + interrupts = <2 5 0>; // these are for "mii command finished", not link changes & co. + }; + + ata@3a00 { + compatible = "fsl,mpc5200b-ata","fsl,mpc5200-ata"; + reg = <0x3a00 0x100>; + interrupts = <2 7 0>; + }; + + sclpc@3c00 { + compatible = "fsl,mpc5200-lpbfifo"; + reg = <0x3c00 0x60>; + interrupts = <2 23 0>; + }; + + i2c@3d00 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,mpc5200b-i2c","fsl,mpc5200-i2c","fsl-i2c"; + reg = <0x3d00 0x40>; + interrupts = <2 15 0>; + }; + + i2c@3d40 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,mpc5200b-i2c","fsl,mpc5200-i2c","fsl-i2c"; + reg = <0x3d40 0x40>; + interrupts = <2 16 0>; + }; + + sram@8000 { + compatible = "fsl,mpc5200b-sram","fsl,mpc5200-sram"; + reg = <0x8000 0x4000>; + }; + }; + + pci: pci@f0000d00 { + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + device_type = "pci"; + compatible = "fsl,mpc5200b-pci","fsl,mpc5200-pci"; + reg = <0xf0000d00 0x100>; + // interrupt-map-mask = need to add + // interrupt-map = need to add + clock-frequency = <0>; // From boot loader + interrupts = <2 8 0 2 9 0 2 10 0>; + bus-range = <0 0>; + // ranges = need to add + }; + + localbus: localbus { + compatible = "fsl,mpc5200b-lpb","fsl,mpc5200-lpb","simple-bus"; + #address-cells = <2>; + #size-cells = <1>; + ranges = <0 0 0xfc000000 0x2000000>; + }; +}; diff --git a/arch/powerpc/boot/dts/mpc7448hpc2.dts b/arch/powerpc/boot/dts/mpc7448hpc2.dts new file mode 100644 index 000000000..20a0d22df --- /dev/null +++ b/arch/powerpc/boot/dts/mpc7448hpc2.dts @@ -0,0 +1,196 @@ +/* + * MPC7448HPC2 (Taiga) board Device Tree Source + * + * Copyright 2006, 2008 Freescale Semiconductor Inc. + * 2006 Roy Zang <Roy Zang at freescale.com>. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +/dts-v1/; + +/ { + model = "mpc7448hpc2"; + compatible = "mpc74xx"; + #address-cells = <1>; + #size-cells = <1>; + + aliases { + ethernet0 = &enet0; + ethernet1 = &enet1; + + serial0 = &serial0; + serial1 = &serial1; + + pci0 = &pci0; + }; + + cpus { + #address-cells = <1>; + #size-cells =<0>; + + PowerPC,7448@0 { + device_type = "cpu"; + reg = <0x0>; + d-cache-line-size = <32>; // 32 bytes + i-cache-line-size = <32>; // 32 bytes + d-cache-size = <0x8000>; // L1, 32K bytes + i-cache-size = <0x8000>; // L1, 32K bytes + timebase-frequency = <0>; // 33 MHz, from uboot + clock-frequency = <0>; // From U-Boot + bus-frequency = <0>; // From U-Boot + }; + }; + + memory { + device_type = "memory"; + reg = <0x0 0x20000000 // DDR2 512M at 0 + >; + }; + + tsi108@c0000000 { + #address-cells = <1>; + #size-cells = <1>; + device_type = "tsi-bridge"; + ranges = <0x0 0xc0000000 0x10000>; + reg = <0xc0000000 0x10000>; + bus-frequency = <0>; + + i2c@7000 { + interrupt-parent = <&mpic>; + interrupts = <14 0>; + reg = <0x7000 0x400>; + device_type = "i2c"; + compatible = "tsi108-i2c"; + }; + + MDIO: mdio@6000 { + compatible = "tsi108-mdio"; + reg = <0x6000 0x50>; + #address-cells = <1>; + #size-cells = <0>; + + phy8: ethernet-phy@8 { + interrupt-parent = <&mpic>; + interrupts = <2 1>; + reg = <0x8>; + }; + + phy9: ethernet-phy@9 { + interrupt-parent = <&mpic>; + interrupts = <2 1>; + reg = <0x9>; + }; + + }; + + enet0: ethernet@6200 { + linux,network-index = <0>; + #size-cells = <0>; + device_type = "network"; + compatible = "tsi108-ethernet"; + reg = <0x6000 0x200>; + address = [ 00 06 D2 00 00 01 ]; + interrupts = <16 2>; + interrupt-parent = <&mpic>; + mdio-handle = <&MDIO>; + phy-handle = <&phy8>; + }; + + enet1: ethernet@6600 { + linux,network-index = <1>; + #address-cells = <1>; + #size-cells = <0>; + device_type = "network"; + compatible = "tsi108-ethernet"; + reg = <0x6400 0x200>; + address = [ 00 06 D2 00 00 02 ]; + interrupts = <17 2>; + interrupt-parent = <&mpic>; + mdio-handle = <&MDIO>; + phy-handle = <&phy9>; + }; + + serial0: serial@7808 { + device_type = "serial"; + compatible = "ns16550"; + reg = <0x7808 0x200>; + clock-frequency = <1064000000>; + interrupts = <12 0>; + interrupt-parent = <&mpic>; + }; + + serial1: serial@7c08 { + device_type = "serial"; + compatible = "ns16550"; + reg = <0x7c08 0x200>; + clock-frequency = <1064000000>; + interrupts = <13 0>; + interrupt-parent = <&mpic>; + }; + + mpic: pic@7400 { + interrupt-controller; + #address-cells = <0>; + #interrupt-cells = <2>; + reg = <0x7400 0x400>; + compatible = "chrp,open-pic"; + device_type = "open-pic"; + }; + pci0: pci@1000 { + compatible = "tsi108-pci"; + device_type = "pci"; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + reg = <0x1000 0x1000>; + bus-range = <0 0>; + ranges = <0x2000000 0x0 0xe0000000 0xe0000000 0x0 0x1a000000 + 0x1000000 0x0 0x0 0xfa000000 0x0 0x10000>; + clock-frequency = <133333332>; + interrupt-parent = <&mpic>; + interrupts = <23 2>; + interrupt-map-mask = <0xf800 0x0 0x0 0x7>; + interrupt-map = < + + /* IDSEL 0x11 */ + 0x800 0x0 0x0 0x1 &RT0 0x24 0x0 + 0x800 0x0 0x0 0x2 &RT0 0x25 0x0 + 0x800 0x0 0x0 0x3 &RT0 0x26 0x0 + 0x800 0x0 0x0 0x4 &RT0 0x27 0x0 + + /* IDSEL 0x12 */ + 0x1000 0x0 0x0 0x1 &RT0 0x25 0x0 + 0x1000 0x0 0x0 0x2 &RT0 0x26 0x0 + 0x1000 0x0 0x0 0x3 &RT0 0x27 0x0 + 0x1000 0x0 0x0 0x4 &RT0 0x24 0x0 + + /* IDSEL 0x13 */ + 0x1800 0x0 0x0 0x1 &RT0 0x26 0x0 + 0x1800 0x0 0x0 0x2 &RT0 0x27 0x0 + 0x1800 0x0 0x0 0x3 &RT0 0x24 0x0 + 0x1800 0x0 0x0 0x4 &RT0 0x25 0x0 + + /* IDSEL 0x14 */ + 0x2000 0x0 0x0 0x1 &RT0 0x27 0x0 + 0x2000 0x0 0x0 0x2 &RT0 0x24 0x0 + 0x2000 0x0 0x0 0x3 &RT0 0x25 0x0 + 0x2000 0x0 0x0 0x4 &RT0 0x26 0x0 + >; + + RT0: router@1180 { + clock-frequency = <0>; + interrupt-controller; + device_type = "pic-router"; + #address-cells = <0>; + #interrupt-cells = <2>; + big-endian; + interrupts = <23 2>; + interrupt-parent = <&mpic>; + }; + }; + }; +}; diff --git a/arch/powerpc/boot/dts/mpc8272ads.dts b/arch/powerpc/boot/dts/mpc8272ads.dts new file mode 100644 index 000000000..6d2cddf64 --- /dev/null +++ b/arch/powerpc/boot/dts/mpc8272ads.dts @@ -0,0 +1,267 @@ +/* + * MPC8272 ADS Device Tree Source + * + * Copyright 2005,2008 Freescale Semiconductor Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +/dts-v1/; + +/ { + model = "MPC8272ADS"; + compatible = "fsl,mpc8272ads"; + #address-cells = <1>; + #size-cells = <1>; + + aliases { + ethernet0 = ð0; + ethernet1 = ð1; + serial0 = &scc1; + serial1 = &scc4; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + PowerPC,8272@0 { + device_type = "cpu"; + reg = <0x0>; + d-cache-line-size = <32>; + i-cache-line-size = <32>; + d-cache-size = <16384>; + i-cache-size = <16384>; + timebase-frequency = <0>; + bus-frequency = <0>; + clock-frequency = <0>; + }; + }; + + memory { + device_type = "memory"; + reg = <0x0 0x0>; + }; + + localbus@f0010100 { + compatible = "fsl,mpc8272-localbus", + "fsl,pq2-localbus"; + #address-cells = <2>; + #size-cells = <1>; + reg = <0xf0010100 0x40>; + + ranges = <0x0 0x0 0xff800000 0x00800000 + 0x1 0x0 0xf4500000 0x8000 + 0x3 0x0 0xf8200000 0x8000>; + + flash@0,0 { + compatible = "jedec-flash"; + reg = <0x0 0x0 0x00800000>; + bank-width = <4>; + device-width = <1>; + }; + + board-control@1,0 { + reg = <0x1 0x0 0x20>; + compatible = "fsl,mpc8272ads-bcsr"; + }; + + PCI_PIC: interrupt-controller@3,0 { + compatible = "fsl,mpc8272ads-pci-pic", + "fsl,pq2ads-pci-pic"; + #interrupt-cells = <1>; + interrupt-controller; + reg = <0x3 0x0 0x8>; + interrupt-parent = <&PIC>; + interrupts = <20 8>; + }; + }; + + + pci@f0010800 { + device_type = "pci"; + reg = <0xf0010800 0x10c 0xf00101ac 0x8 0xf00101c4 0x8>; + compatible = "fsl,mpc8272-pci", "fsl,pq2-pci"; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + clock-frequency = <66666666>; + interrupt-map-mask = <0xf800 0x0 0x0 0x7>; + interrupt-map = < + /* IDSEL 0x16 */ + 0xb000 0x0 0x0 0x1 &PCI_PIC 0 + 0xb000 0x0 0x0 0x2 &PCI_PIC 1 + 0xb000 0x0 0x0 0x3 &PCI_PIC 2 + 0xb000 0x0 0x0 0x4 &PCI_PIC 3 + + /* IDSEL 0x17 */ + 0xb800 0x0 0x0 0x1 &PCI_PIC 4 + 0xb800 0x0 0x0 0x2 &PCI_PIC 5 + 0xb800 0x0 0x0 0x3 &PCI_PIC 6 + 0xb800 0x0 0x0 0x4 &PCI_PIC 7 + + /* IDSEL 0x18 */ + 0xc000 0x0 0x0 0x1 &PCI_PIC 8 + 0xc000 0x0 0x0 0x2 &PCI_PIC 9 + 0xc000 0x0 0x0 0x3 &PCI_PIC 10 + 0xc000 0x0 0x0 0x4 &PCI_PIC 11>; + + interrupt-parent = <&PIC>; + interrupts = <18 8>; + ranges = <0x42000000 0x0 0x80000000 0x80000000 0x0 0x20000000 + 0x2000000 0x0 0xa0000000 0xa0000000 0x0 0x20000000 + 0x1000000 0x0 0x0 0xf6000000 0x0 0x2000000>; + }; + + soc@f0000000 { + #address-cells = <1>; + #size-cells = <1>; + device_type = "soc"; + compatible = "fsl,mpc8272", "fsl,pq2-soc"; + ranges = <0x0 0xf0000000 0x53000>; + + // Temporary -- will go away once kernel uses ranges for get_immrbase(). + reg = <0xf0000000 0x53000>; + + cpm@119c0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,mpc8272-cpm", "fsl,cpm2"; + reg = <0x119c0 0x30>; + ranges; + + muram@0 { + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x0 0x10000>; + + data@0 { + compatible = "fsl,cpm-muram-data"; + reg = <0x0 0x2000 0x9800 0x800>; + }; + }; + + brg@119f0 { + compatible = "fsl,mpc8272-brg", + "fsl,cpm2-brg", + "fsl,cpm-brg"; + reg = <0x119f0 0x10 0x115f0 0x10>; + }; + + scc1: serial@11a00 { + device_type = "serial"; + compatible = "fsl,mpc8272-scc-uart", + "fsl,cpm2-scc-uart"; + reg = <0x11a00 0x20 0x8000 0x100>; + interrupts = <40 8>; + interrupt-parent = <&PIC>; + fsl,cpm-brg = <1>; + fsl,cpm-command = <0x800000>; + }; + + scc4: serial@11a60 { + device_type = "serial"; + compatible = "fsl,mpc8272-scc-uart", + "fsl,cpm2-scc-uart"; + reg = <0x11a60 0x20 0x8300 0x100>; + interrupts = <43 8>; + interrupt-parent = <&PIC>; + fsl,cpm-brg = <4>; + fsl,cpm-command = <0xce00000>; + }; + + usb@11b60 { + compatible = "fsl,mpc8272-cpm-usb"; + reg = <0x11b60 0x40 0x8b00 0x100>; + interrupts = <11 8>; + interrupt-parent = <&PIC>; + mode = "peripheral"; + }; + + mdio@10d40 { + compatible = "fsl,mpc8272ads-mdio-bitbang", + "fsl,mpc8272-mdio-bitbang", + "fsl,cpm2-mdio-bitbang"; + reg = <0x10d40 0x14>; + #address-cells = <1>; + #size-cells = <0>; + fsl,mdio-pin = <18>; + fsl,mdc-pin = <19>; + + PHY0: ethernet-phy@0 { + interrupt-parent = <&PIC>; + interrupts = <23 8>; + reg = <0x0>; + }; + + PHY1: ethernet-phy@1 { + interrupt-parent = <&PIC>; + interrupts = <23 8>; + reg = <0x3>; + }; + }; + + eth0: ethernet@11300 { + device_type = "network"; + compatible = "fsl,mpc8272-fcc-enet", + "fsl,cpm2-fcc-enet"; + reg = <0x11300 0x20 0x8400 0x100 0x11390 0x1>; + local-mac-address = [ 00 00 00 00 00 00 ]; + interrupts = <32 8>; + interrupt-parent = <&PIC>; + phy-handle = <&PHY0>; + linux,network-index = <0>; + fsl,cpm-command = <0x12000300>; + }; + + eth1: ethernet@11320 { + device_type = "network"; + compatible = "fsl,mpc8272-fcc-enet", + "fsl,cpm2-fcc-enet"; + reg = <0x11320 0x20 0x8500 0x100 0x113b0 0x1>; + local-mac-address = [ 00 00 00 00 00 00 ]; + interrupts = <33 8>; + interrupt-parent = <&PIC>; + phy-handle = <&PHY1>; + linux,network-index = <1>; + fsl,cpm-command = <0x16200300>; + }; + + i2c@11860 { + compatible = "fsl,mpc8272-i2c", + "fsl,cpm2-i2c"; + reg = <0x11860 0x20 0x8afc 0x2>; + interrupts = <1 8>; + interrupt-parent = <&PIC>; + fsl,cpm-command = <0x29600000>; + #address-cells = <1>; + #size-cells = <0>; + }; + }; + + PIC: interrupt-controller@10c00 { + #interrupt-cells = <2>; + interrupt-controller; + reg = <0x10c00 0x80>; + compatible = "fsl,mpc8272-pic", "fsl,cpm2-pic"; + }; + + crypto@30000 { + compatible = "fsl,sec1.0"; + reg = <0x40000 0x13000>; + interrupts = <47 0x8>; + interrupt-parent = <&PIC>; + fsl,num-channels = <4>; + fsl,channel-fifo-len = <24>; + fsl,exec-units-mask = <0x7e>; + fsl,descriptor-types-mask = <0x1010415>; + }; + }; + + chosen { + linux,stdout-path = "/soc/cpm/serial@11a00"; + }; +}; diff --git a/arch/powerpc/boot/dts/mpc8308_p1m.dts b/arch/powerpc/boot/dts/mpc8308_p1m.dts new file mode 100644 index 000000000..57f86cdf9 --- /dev/null +++ b/arch/powerpc/boot/dts/mpc8308_p1m.dts @@ -0,0 +1,338 @@ +/* + * mpc8308_p1m Device Tree Source + * + * Copyright 2010 Ilya Yanok, Emcraft Systems, yanok@emcraft.com + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +/dts-v1/; + +/ { + compatible = "denx,mpc8308_p1m"; + #address-cells = <1>; + #size-cells = <1>; + + aliases { + ethernet0 = &enet0; + ethernet1 = &enet1; + serial0 = &serial0; + serial1 = &serial1; + pci0 = &pci0; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + PowerPC,8308@0 { + device_type = "cpu"; + reg = <0x0>; + d-cache-line-size = <32>; + i-cache-line-size = <32>; + d-cache-size = <16384>; + i-cache-size = <16384>; + timebase-frequency = <0>; // from bootloader + bus-frequency = <0>; // from bootloader + clock-frequency = <0>; // from bootloader + }; + }; + + memory { + device_type = "memory"; + reg = <0x00000000 0x08000000>; // 128MB at 0 + }; + + localbus@e0005000 { + #address-cells = <2>; + #size-cells = <1>; + compatible = "fsl,mpc8315-elbc", "fsl,elbc", "simple-bus"; + reg = <0xe0005000 0x1000>; + interrupts = <77 0x8>; + interrupt-parent = <&ipic>; + + ranges = <0x0 0x0 0xfc000000 0x04000000 + 0x1 0x0 0xfbff0000 0x00008000 + 0x2 0x0 0xfbff8000 0x00008000>; + + flash@0,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "cfi-flash"; + reg = <0x0 0x0 0x4000000>; + bank-width = <2>; + device-width = <1>; + + u-boot@0 { + reg = <0x0 0x60000>; + read-only; + }; + env@60000 { + reg = <0x60000 0x20000>; + }; + env1@80000 { + reg = <0x80000 0x20000>; + }; + kernel@a0000 { + reg = <0xa0000 0x200000>; + }; + dtb@2a0000 { + reg = <0x2a0000 0x20000>; + }; + ramdisk@2c0000 { + reg = <0x2c0000 0x640000>; + }; + user@700000 { + reg = <0x700000 0x3900000>; + }; + }; + + can@1,0 { + compatible = "nxp,sja1000"; + reg = <0x1 0x0 0x80>; + interrupts = <18 0x8>; + interrups-parent = <&ipic>; + }; + + cpld@2,0 { + compatible = "denx,mpc8308_p1m-cpld"; + reg = <0x2 0x0 0x8>; + interrupts = <48 0x8>; + interrups-parent = <&ipic>; + }; + }; + + immr@e0000000 { + #address-cells = <1>; + #size-cells = <1>; + device_type = "soc"; + compatible = "fsl,mpc8308-immr", "simple-bus"; + ranges = <0 0xe0000000 0x00100000>; + reg = <0xe0000000 0x00000200>; + bus-frequency = <0>; + + i2c@3000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl-i2c"; + reg = <0x3000 0x100>; + interrupts = <14 0x8>; + interrupt-parent = <&ipic>; + dfsrr; + fram@50 { + compatible = "ramtron,24c64"; + reg = <0x50>; + }; + }; + + i2c@3100 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl-i2c"; + reg = <0x3100 0x100>; + interrupts = <15 0x8>; + interrupt-parent = <&ipic>; + dfsrr; + pwm@28 { + compatible = "maxim,ds1050"; + reg = <0x28>; + }; + sensor@48 { + compatible = "maxim,max6625"; + reg = <0x48>; + }; + sensor@49 { + compatible = "maxim,max6625"; + reg = <0x49>; + }; + sensor@4b { + compatible = "maxim,max6625"; + reg = <0x4b>; + }; + }; + + usb@23000 { + compatible = "fsl-usb2-dr"; + reg = <0x23000 0x1000>; + #address-cells = <1>; + #size-cells = <0>; + interrupt-parent = <&ipic>; + interrupts = <38 0x8>; + dr_mode = "peripheral"; + phy_type = "ulpi"; + }; + + enet0: ethernet@24000 { + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x24000 0x1000>; + + cell-index = <0>; + device_type = "network"; + model = "eTSEC"; + compatible = "gianfar"; + reg = <0x24000 0x1000>; + local-mac-address = [ 00 00 00 00 00 00 ]; + interrupts = <32 0x8 33 0x8 34 0x8>; + interrupt-parent = <&ipic>; + phy-handle = < &phy1 >; + + mdio@520 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,gianfar-mdio"; + reg = <0x520 0x20>; + phy1: ethernet-phy@1 { + interrupt-parent = <&ipic>; + interrupts = <17 0x8>; + reg = <0x1>; + }; + phy2: ethernet-phy@2 { + interrupt-parent = <&ipic>; + interrupts = <19 0x8>; + reg = <0x2>; + }; + tbi0: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + }; + + enet1: ethernet@25000 { + #address-cells = <1>; + #size-cells = <1>; + cell-index = <1>; + device_type = "network"; + model = "eTSEC"; + compatible = "gianfar"; + reg = <0x25000 0x1000>; + ranges = <0x0 0x25000 0x1000>; + local-mac-address = [ 00 00 00 00 00 00 ]; + interrupts = <35 0x8 36 0x8 37 0x8>; + interrupt-parent = <&ipic>; + phy-handle = < &phy2 >; + + mdio@520 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,gianfar-tbi"; + reg = <0x520 0x20>; + tbi1: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + }; + + serial0: serial@4500 { + cell-index = <0>; + device_type = "serial"; + compatible = "fsl,ns16550", "ns16550"; + reg = <0x4500 0x100>; + clock-frequency = <133333333>; + interrupts = <9 0x8>; + interrupt-parent = <&ipic>; + }; + + serial1: serial@4600 { + cell-index = <1>; + device_type = "serial"; + compatible = "fsl,ns16550", "ns16550"; + reg = <0x4600 0x100>; + clock-frequency = <133333333>; + interrupts = <10 0x8>; + interrupt-parent = <&ipic>; + }; + + gpio@c00 { + #gpio-cells = <2>; + compatible = "fsl,mpc8308-gpio", "fsl,mpc8349-gpio"; + reg = <0xc00 0x18>; + interrupts = <74 0x8>; + interrupt-parent = <&ipic>; + gpio-controller; + }; + + timer@500 { + compatible = "fsl,mpc8308-gtm", "fsl,gtm"; + reg = <0x500 0x100>; + interrupts = <90 8 78 8 84 8 72 8>; + interrupt-parent = <&ipic>; + clock-frequency = <133333333>; + }; + + /* IPIC + * interrupts cell = <intr #, sense> + * sense values match linux IORESOURCE_IRQ_* defines: + * sense == 8: Level, low assertion + * sense == 2: Edge, high-to-low change + */ + ipic: interrupt-controller@700 { + compatible = "fsl,ipic"; + interrupt-controller; + #address-cells = <0>; + #interrupt-cells = <2>; + reg = <0x700 0x100>; + device_type = "ipic"; + }; + + ipic-msi@7c0 { + compatible = "fsl,ipic-msi"; + reg = <0x7c0 0x40>; + msi-available-ranges = <0x0 0x100>; + interrupts = < 0x43 0x8 + 0x4 0x8 + 0x51 0x8 + 0x52 0x8 + 0x56 0x8 + 0x57 0x8 + 0x58 0x8 + 0x59 0x8 >; + interrupt-parent = < &ipic >; + }; + + dma@2c000 { + compatible = "fsl,mpc8308-dma"; + reg = <0x2c000 0x1800>; + interrupts = <3 0x8 + 94 0x8>; + interrupt-parent = < &ipic >; + }; + + }; + + pci0: pcie@e0009000 { + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + device_type = "pci"; + compatible = "fsl,mpc8308-pcie", "fsl,mpc8314-pcie"; + reg = <0xe0009000 0x00001000 + 0xb0000000 0x01000000>; + ranges = <0x02000000 0 0xa0000000 0xa0000000 0 0x10000000 + 0x01000000 0 0x00000000 0xb1000000 0 0x00800000>; + bus-range = <0 0>; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &ipic 1 8>; + interrupts = <0x1 0x8>; + interrupt-parent = <&ipic>; + clock-frequency = <0>; + + pcie@0 { + #address-cells = <3>; + #size-cells = <2>; + device_type = "pci"; + reg = <0 0 0 0 0>; + ranges = <0x02000000 0 0xa0000000 + 0x02000000 0 0xa0000000 + 0 0x10000000 + 0x01000000 0 0x00000000 + 0x01000000 0 0x00000000 + 0 0x00800000>; + }; + }; +}; diff --git a/arch/powerpc/boot/dts/mpc8308rdb.dts b/arch/powerpc/boot/dts/mpc8308rdb.dts new file mode 100644 index 000000000..d0211f041 --- /dev/null +++ b/arch/powerpc/boot/dts/mpc8308rdb.dts @@ -0,0 +1,310 @@ +/* + * MPC8308RDB Device Tree Source + * + * Copyright 2009 Freescale Semiconductor Inc. + * Copyright 2010 Ilya Yanok, Emcraft Systems, yanok@emcraft.com + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +/dts-v1/; + +/ { + compatible = "fsl,mpc8308rdb"; + #address-cells = <1>; + #size-cells = <1>; + + aliases { + ethernet0 = &enet0; + ethernet1 = &enet1; + serial0 = &serial0; + serial1 = &serial1; + pci0 = &pci0; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + PowerPC,8308@0 { + device_type = "cpu"; + reg = <0x0>; + d-cache-line-size = <32>; + i-cache-line-size = <32>; + d-cache-size = <16384>; + i-cache-size = <16384>; + timebase-frequency = <0>; // from bootloader + bus-frequency = <0>; // from bootloader + clock-frequency = <0>; // from bootloader + }; + }; + + memory { + device_type = "memory"; + reg = <0x00000000 0x08000000>; // 128MB at 0 + }; + + localbus@e0005000 { + #address-cells = <2>; + #size-cells = <1>; + compatible = "fsl,mpc8315-elbc", "fsl,elbc", "simple-bus"; + reg = <0xe0005000 0x1000>; + interrupts = <77 0x8>; + interrupt-parent = <&ipic>; + + // CS0 and CS1 are swapped when + // booting from nand, but the + // addresses are the same. + ranges = <0x0 0x0 0xfe000000 0x00800000 + 0x1 0x0 0xe0600000 0x00002000 + 0x2 0x0 0xf0000000 0x00020000 + 0x3 0x0 0xfa000000 0x00008000>; + + flash@0,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "cfi-flash"; + reg = <0x0 0x0 0x800000>; + bank-width = <2>; + device-width = <1>; + + u-boot@0 { + reg = <0x0 0x60000>; + read-only; + }; + env@60000 { + reg = <0x60000 0x10000>; + }; + env1@70000 { + reg = <0x70000 0x10000>; + }; + kernel@80000 { + reg = <0x80000 0x200000>; + }; + dtb@280000 { + reg = <0x280000 0x10000>; + }; + ramdisk@290000 { + reg = <0x290000 0x570000>; + }; + }; + + nand@1,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,mpc8315-fcm-nand", + "fsl,elbc-fcm-nand"; + reg = <0x1 0x0 0x2000>; + + jffs2@0 { + reg = <0x0 0x2000000>; + }; + }; + }; + + immr@e0000000 { + #address-cells = <1>; + #size-cells = <1>; + device_type = "soc"; + compatible = "fsl,mpc8308-immr", "simple-bus"; + ranges = <0 0xe0000000 0x00100000>; + reg = <0xe0000000 0x00000200>; + bus-frequency = <0>; + + i2c@3000 { + #address-cells = <1>; + #size-cells = <0>; + cell-index = <0>; + compatible = "fsl-i2c"; + reg = <0x3000 0x100>; + interrupts = <14 0x8>; + interrupt-parent = <&ipic>; + dfsrr; + rtc@68 { + compatible = "dallas,ds1339"; + reg = <0x68>; + }; + }; + + usb@23000 { + compatible = "fsl-usb2-dr"; + reg = <0x23000 0x1000>; + #address-cells = <1>; + #size-cells = <0>; + interrupt-parent = <&ipic>; + interrupts = <38 0x8>; + dr_mode = "peripheral"; + phy_type = "ulpi"; + }; + + enet0: ethernet@24000 { + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x24000 0x1000>; + + cell-index = <0>; + device_type = "network"; + model = "eTSEC"; + compatible = "gianfar"; + reg = <0x24000 0x1000>; + local-mac-address = [ 00 00 00 00 00 00 ]; + interrupts = <32 0x8 33 0x8 34 0x8>; + interrupt-parent = <&ipic>; + tbi-handle = < &tbi0 >; + phy-handle = < &phy2 >; + fsl,magic-packet; + + mdio@520 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,gianfar-mdio"; + reg = <0x520 0x20>; + phy2: ethernet-phy@2 { + interrupt-parent = <&ipic>; + interrupts = <17 0x8>; + reg = <0x2>; + }; + tbi0: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + }; + + enet1: ethernet@25000 { + #address-cells = <1>; + #size-cells = <1>; + cell-index = <1>; + device_type = "network"; + model = "eTSEC"; + compatible = "gianfar"; + reg = <0x25000 0x1000>; + ranges = <0x0 0x25000 0x1000>; + local-mac-address = [ 00 00 00 00 00 00 ]; + interrupts = <35 0x8 36 0x8 37 0x8>; + interrupt-parent = <&ipic>; + tbi-handle = < &tbi1 >; + /* Vitesse 7385 isn't on the MDIO bus */ + fixed-link = <1 1 1000 0 0>; + fsl,magic-packet; + + mdio@520 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,gianfar-tbi"; + reg = <0x520 0x20>; + + tbi1: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + }; + + serial0: serial@4500 { + cell-index = <0>; + device_type = "serial"; + compatible = "fsl,ns16550", "ns16550"; + reg = <0x4500 0x100>; + clock-frequency = <133333333>; + interrupts = <9 0x8>; + interrupt-parent = <&ipic>; + }; + + serial1: serial@4600 { + cell-index = <1>; + device_type = "serial"; + compatible = "fsl,ns16550", "ns16550"; + reg = <0x4600 0x100>; + clock-frequency = <133333333>; + interrupts = <10 0x8>; + interrupt-parent = <&ipic>; + }; + + gpio@c00 { + #gpio-cells = <2>; + device_type = "gpio"; + compatible = "fsl,mpc8308-gpio", "fsl,mpc8349-gpio"; + reg = <0xc00 0x18>; + interrupts = <74 0x8>; + interrupt-parent = <&ipic>; + gpio-controller; + }; + + /* IPIC + * interrupts cell = <intr #, sense> + * sense values match linux IORESOURCE_IRQ_* defines: + * sense == 8: Level, low assertion + * sense == 2: Edge, high-to-low change + */ + ipic: interrupt-controller@700 { + compatible = "fsl,ipic"; + interrupt-controller; + #address-cells = <0>; + #interrupt-cells = <2>; + reg = <0x700 0x100>; + device_type = "ipic"; + }; + + ipic-msi@7c0 { + compatible = "fsl,ipic-msi"; + reg = <0x7c0 0x40>; + msi-available-ranges = <0x0 0x100>; + interrupts = < 0x43 0x8 + 0x4 0x8 + 0x51 0x8 + 0x52 0x8 + 0x56 0x8 + 0x57 0x8 + 0x58 0x8 + 0x59 0x8 >; + interrupt-parent = < &ipic >; + }; + + dma@2c000 { + compatible = "fsl,mpc8308-dma"; + reg = <0x2c000 0x1800>; + interrupts = <3 0x8 + 94 0x8>; + interrupt-parent = < &ipic >; + }; + + }; + + pci0: pcie@e0009000 { + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + device_type = "pci"; + compatible = "fsl,mpc8308-pcie", "fsl,mpc8314-pcie"; + reg = <0xe0009000 0x00001000 + 0xb0000000 0x01000000>; + ranges = <0x02000000 0 0xa0000000 0xa0000000 0 0x10000000 + 0x01000000 0 0x00000000 0xb1000000 0 0x00800000>; + bus-range = <0 0>; + interrupt-map-mask = <0xf800 0 0 7>; + interrupt-map = <0 0 0 1 &ipic 1 8 + 0 0 0 2 &ipic 1 8 + 0 0 0 3 &ipic 1 8 + 0 0 0 4 &ipic 1 8>; + interrupts = <0x1 0x8>; + interrupt-parent = <&ipic>; + clock-frequency = <0>; + + pcie@0 { + #address-cells = <3>; + #size-cells = <2>; + device_type = "pci"; + reg = <0 0 0 0 0>; + ranges = <0x02000000 0 0xa0000000 + 0x02000000 0 0xa0000000 + 0 0x10000000 + 0x01000000 0 0x00000000 + 0x01000000 0 0x00000000 + 0 0x00800000>; + }; + }; +}; diff --git a/arch/powerpc/boot/dts/mpc8313erdb.dts b/arch/powerpc/boot/dts/mpc8313erdb.dts new file mode 100644 index 000000000..4b635dc4e --- /dev/null +++ b/arch/powerpc/boot/dts/mpc8313erdb.dts @@ -0,0 +1,409 @@ +/* + * MPC8313E RDB Device Tree Source + * + * Copyright 2005, 2006, 2007 Freescale Semiconductor Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +/dts-v1/; + +/ { + model = "MPC8313ERDB"; + compatible = "MPC8313ERDB", "MPC831xRDB", "MPC83xxRDB"; + #address-cells = <1>; + #size-cells = <1>; + + aliases { + ethernet0 = &enet0; + ethernet1 = &enet1; + serial0 = &serial0; + serial1 = &serial1; + pci0 = &pci0; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + PowerPC,8313@0 { + device_type = "cpu"; + reg = <0x0>; + d-cache-line-size = <32>; + i-cache-line-size = <32>; + d-cache-size = <16384>; + i-cache-size = <16384>; + timebase-frequency = <0>; // from bootloader + bus-frequency = <0>; // from bootloader + clock-frequency = <0>; // from bootloader + }; + }; + + memory { + device_type = "memory"; + reg = <0x00000000 0x08000000>; // 128MB at 0 + }; + + localbus@e0005000 { + #address-cells = <2>; + #size-cells = <1>; + compatible = "fsl,mpc8313-elbc", "fsl,elbc", "simple-bus"; + reg = <0xe0005000 0x1000>; + interrupts = <77 0x8>; + interrupt-parent = <&ipic>; + + // CS0 and CS1 are swapped when + // booting from nand, but the + // addresses are the same. + ranges = <0x0 0x0 0xfe000000 0x00800000 + 0x1 0x0 0xe2800000 0x00008000 + 0x2 0x0 0xf0000000 0x00020000 + 0x3 0x0 0xfa000000 0x00008000>; + + flash@0,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "cfi-flash"; + reg = <0x0 0x0 0x800000>; + bank-width = <2>; + device-width = <1>; + }; + + nand@1,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,mpc8313-fcm-nand", + "fsl,elbc-fcm-nand"; + reg = <0x1 0x0 0x2000>; + + u-boot@0 { + reg = <0x0 0x100000>; + read-only; + }; + + kernel@100000 { + reg = <0x100000 0x300000>; + }; + + fs@400000 { + reg = <0x400000 0x1c00000>; + }; + }; + }; + + soc8313@e0000000 { + #address-cells = <1>; + #size-cells = <1>; + device_type = "soc"; + compatible = "simple-bus"; + ranges = <0x0 0xe0000000 0x00100000>; + reg = <0xe0000000 0x00000200>; + bus-frequency = <0>; + + wdt@200 { + device_type = "watchdog"; + compatible = "mpc83xx_wdt"; + reg = <0x200 0x100>; + }; + + sleep-nexus { + #address-cells = <1>; + #size-cells = <1>; + compatible = "simple-bus"; + sleep = <&pmc 0x03000000>; + ranges; + + i2c@3000 { + #address-cells = <1>; + #size-cells = <0>; + cell-index = <0>; + compatible = "fsl-i2c"; + reg = <0x3000 0x100>; + interrupts = <14 0x8>; + interrupt-parent = <&ipic>; + dfsrr; + rtc@68 { + compatible = "dallas,ds1339"; + reg = <0x68>; + }; + }; + + crypto@30000 { + compatible = "fsl,sec2.2", "fsl,sec2.1", + "fsl,sec2.0"; + reg = <0x30000 0x10000>; + interrupts = <11 0x8>; + interrupt-parent = <&ipic>; + fsl,num-channels = <1>; + fsl,channel-fifo-len = <24>; + fsl,exec-units-mask = <0x4c>; + fsl,descriptor-types-mask = <0x0122003f>; + }; + }; + + i2c@3100 { + #address-cells = <1>; + #size-cells = <0>; + cell-index = <1>; + compatible = "fsl-i2c"; + reg = <0x3100 0x100>; + interrupts = <15 0x8>; + interrupt-parent = <&ipic>; + dfsrr; + }; + + spi@7000 { + cell-index = <0>; + compatible = "fsl,spi"; + reg = <0x7000 0x1000>; + interrupts = <16 0x8>; + interrupt-parent = <&ipic>; + mode = "cpu"; + }; + + /* phy type (ULPI, UTMI, UTMI_WIDE, SERIAL) */ + usb@23000 { + compatible = "fsl-usb2-dr"; + reg = <0x23000 0x1000>; + #address-cells = <1>; + #size-cells = <0>; + interrupt-parent = <&ipic>; + interrupts = <38 0x8>; + phy_type = "utmi_wide"; + sleep = <&pmc 0x00300000>; + }; + + ptp_clock@24E00 { + compatible = "fsl,etsec-ptp"; + reg = <0x24E00 0xB0>; + interrupts = <12 0x8 13 0x8>; + interrupt-parent = < &ipic >; + fsl,tclk-period = <10>; + fsl,tmr-prsc = <100>; + fsl,tmr-add = <0x999999A4>; + fsl,tmr-fiper1 = <0x3B9AC9F6>; + fsl,tmr-fiper2 = <0x00018696>; + fsl,max-adj = <659999998>; + }; + + enet0: ethernet@24000 { + #address-cells = <1>; + #size-cells = <1>; + sleep = <&pmc 0x20000000>; + ranges = <0x0 0x24000 0x1000>; + + cell-index = <0>; + device_type = "network"; + model = "eTSEC"; + compatible = "gianfar"; + reg = <0x24000 0x1000>; + local-mac-address = [ 00 00 00 00 00 00 ]; + interrupts = <37 0x8 36 0x8 35 0x8>; + interrupt-parent = <&ipic>; + tbi-handle = < &tbi0 >; + /* Vitesse 7385 isn't on the MDIO bus */ + fixed-link = <1 1 1000 0 0>; + fsl,magic-packet; + + mdio@520 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,gianfar-mdio"; + reg = <0x520 0x20>; + phy4: ethernet-phy@4 { + interrupt-parent = <&ipic>; + interrupts = <20 0x8>; + reg = <0x4>; + }; + tbi0: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + }; + + enet1: ethernet@25000 { + #address-cells = <1>; + #size-cells = <1>; + cell-index = <1>; + device_type = "network"; + model = "eTSEC"; + compatible = "gianfar"; + reg = <0x25000 0x1000>; + ranges = <0x0 0x25000 0x1000>; + local-mac-address = [ 00 00 00 00 00 00 ]; + interrupts = <34 0x8 33 0x8 32 0x8>; + interrupt-parent = <&ipic>; + tbi-handle = < &tbi1 >; + phy-handle = < &phy4 >; + sleep = <&pmc 0x10000000>; + fsl,magic-packet; + + mdio@520 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,gianfar-tbi"; + reg = <0x520 0x20>; + + tbi1: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + + + }; + + serial0: serial@4500 { + cell-index = <0>; + device_type = "serial"; + compatible = "fsl,ns16550", "ns16550"; + reg = <0x4500 0x100>; + clock-frequency = <0>; + interrupts = <9 0x8>; + interrupt-parent = <&ipic>; + }; + + serial1: serial@4600 { + cell-index = <1>; + device_type = "serial"; + compatible = "fsl,ns16550", "ns16550"; + reg = <0x4600 0x100>; + clock-frequency = <0>; + interrupts = <10 0x8>; + interrupt-parent = <&ipic>; + }; + + /* IPIC + * interrupts cell = <intr #, sense> + * sense values match linux IORESOURCE_IRQ_* defines: + * sense == 8: Level, low assertion + * sense == 2: Edge, high-to-low change + */ + ipic: pic@700 { + interrupt-controller; + #address-cells = <0>; + #interrupt-cells = <2>; + reg = <0x700 0x100>; + device_type = "ipic"; + }; + + pmc: power@b00 { + compatible = "fsl,mpc8313-pmc", "fsl,mpc8349-pmc"; + reg = <0xb00 0x100 0xa00 0x100>; + interrupts = <80 8>; + interrupt-parent = <&ipic>; + fsl,mpc8313-wakeup-timer = <>m1>; + + /* Remove this (or change to "okay") if you have + * a REVA3 or later board, if you apply one of the + * workarounds listed in section 8.5 of the board + * manual, or if you are adapting this device tree + * to a different board. + */ + status = "fail"; + }; + + gtm1: timer@500 { + compatible = "fsl,mpc8313-gtm", "fsl,gtm"; + reg = <0x500 0x100>; + interrupts = <90 8 78 8 84 8 72 8>; + interrupt-parent = <&ipic>; + }; + + timer@600 { + compatible = "fsl,mpc8313-gtm", "fsl,gtm"; + reg = <0x600 0x100>; + interrupts = <91 8 79 8 85 8 73 8>; + interrupt-parent = <&ipic>; + }; + }; + + sleep-nexus { + #address-cells = <1>; + #size-cells = <1>; + compatible = "simple-bus"; + sleep = <&pmc 0x00010000>; + ranges; + + pci0: pci@e0008500 { + cell-index = <1>; + interrupt-map-mask = <0xf800 0x0 0x0 0x7>; + interrupt-map = < + /* IDSEL 0x0E -mini PCI */ + 0x7000 0x0 0x0 0x1 &ipic 18 0x8 + 0x7000 0x0 0x0 0x2 &ipic 18 0x8 + 0x7000 0x0 0x0 0x3 &ipic 18 0x8 + 0x7000 0x0 0x0 0x4 &ipic 18 0x8 + + /* IDSEL 0x0F - PCI slot */ + 0x7800 0x0 0x0 0x1 &ipic 17 0x8 + 0x7800 0x0 0x0 0x2 &ipic 18 0x8 + 0x7800 0x0 0x0 0x3 &ipic 17 0x8 + 0x7800 0x0 0x0 0x4 &ipic 18 0x8>; + interrupt-parent = <&ipic>; + interrupts = <66 0x8>; + bus-range = <0x0 0x0>; + ranges = <0x02000000 0x0 0x90000000 0x90000000 0x0 0x10000000 + 0x42000000 0x0 0x80000000 0x80000000 0x0 0x10000000 + 0x01000000 0x0 0x00000000 0xe2000000 0x0 0x00100000>; + clock-frequency = <66666666>; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + reg = <0xe0008500 0x100 /* internal registers */ + 0xe0008300 0x8>; /* config space access registers */ + compatible = "fsl,mpc8349-pci"; + device_type = "pci"; + }; + + dma@82a8 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,mpc8313-dma", "fsl,elo-dma"; + reg = <0xe00082a8 4>; + ranges = <0 0xe0008100 0x1a8>; + interrupt-parent = <&ipic>; + interrupts = <71 8>; + + dma-channel@0 { + compatible = "fsl,mpc8313-dma-channel", + "fsl,elo-dma-channel"; + reg = <0 0x28>; + interrupt-parent = <&ipic>; + interrupts = <71 8>; + cell-index = <0>; + }; + + dma-channel@80 { + compatible = "fsl,mpc8313-dma-channel", + "fsl,elo-dma-channel"; + reg = <0x80 0x28>; + interrupt-parent = <&ipic>; + interrupts = <71 8>; + cell-index = <1>; + }; + + dma-channel@100 { + compatible = "fsl,mpc8313-dma-channel", + "fsl,elo-dma-channel"; + reg = <0x100 0x28>; + interrupt-parent = <&ipic>; + interrupts = <71 8>; + cell-index = <2>; + }; + + dma-channel@180 { + compatible = "fsl,mpc8313-dma-channel", + "fsl,elo-dma-channel"; + reg = <0x180 0x28>; + interrupt-parent = <&ipic>; + interrupts = <71 8>; + cell-index = <3>; + }; + }; + }; +}; diff --git a/arch/powerpc/boot/dts/mpc8315erdb.dts b/arch/powerpc/boot/dts/mpc8315erdb.dts new file mode 100644 index 000000000..43546844e --- /dev/null +++ b/arch/powerpc/boot/dts/mpc8315erdb.dts @@ -0,0 +1,478 @@ +/* + * MPC8315E RDB Device Tree Source + * + * Copyright 2007 Freescale Semiconductor Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +/dts-v1/; + +/ { + compatible = "fsl,mpc8315erdb"; + #address-cells = <1>; + #size-cells = <1>; + + aliases { + ethernet0 = &enet0; + ethernet1 = &enet1; + serial0 = &serial0; + serial1 = &serial1; + pci0 = &pci0; + pci1 = &pci1; + pci2 = &pci2; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + PowerPC,8315@0 { + device_type = "cpu"; + reg = <0x0>; + d-cache-line-size = <32>; + i-cache-line-size = <32>; + d-cache-size = <16384>; + i-cache-size = <16384>; + timebase-frequency = <0>; // from bootloader + bus-frequency = <0>; // from bootloader + clock-frequency = <0>; // from bootloader + }; + }; + + memory { + device_type = "memory"; + reg = <0x00000000 0x08000000>; // 128MB at 0 + }; + + localbus@e0005000 { + #address-cells = <2>; + #size-cells = <1>; + compatible = "fsl,mpc8315-elbc", "fsl,elbc", "simple-bus"; + reg = <0xe0005000 0x1000>; + interrupts = <77 0x8>; + interrupt-parent = <&ipic>; + + // CS0 and CS1 are swapped when + // booting from nand, but the + // addresses are the same. + ranges = <0x0 0x0 0xfe000000 0x00800000 + 0x1 0x0 0xe0600000 0x00002000 + 0x2 0x0 0xf0000000 0x00020000 + 0x3 0x0 0xfa000000 0x00008000>; + + flash@0,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "cfi-flash"; + reg = <0x0 0x0 0x800000>; + bank-width = <2>; + device-width = <1>; + }; + + nand@1,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,mpc8315-fcm-nand", + "fsl,elbc-fcm-nand"; + reg = <0x1 0x0 0x2000>; + + u-boot@0 { + reg = <0x0 0x100000>; + read-only; + }; + + kernel@100000 { + reg = <0x100000 0x300000>; + }; + fs@400000 { + reg = <0x400000 0x1c00000>; + }; + }; + }; + + immr@e0000000 { + #address-cells = <1>; + #size-cells = <1>; + device_type = "soc"; + compatible = "fsl,mpc8315-immr", "simple-bus"; + ranges = <0 0xe0000000 0x00100000>; + reg = <0xe0000000 0x00000200>; + bus-frequency = <0>; + + wdt@200 { + device_type = "watchdog"; + compatible = "mpc83xx_wdt"; + reg = <0x200 0x100>; + }; + + i2c@3000 { + #address-cells = <1>; + #size-cells = <0>; + cell-index = <0>; + compatible = "fsl-i2c"; + reg = <0x3000 0x100>; + interrupts = <14 0x8>; + interrupt-parent = <&ipic>; + dfsrr; + rtc@68 { + compatible = "dallas,ds1339"; + reg = <0x68>; + }; + + mcu_pio: mcu@a { + #gpio-cells = <2>; + compatible = "fsl,mc9s08qg8-mpc8315erdb", + "fsl,mcu-mpc8349emitx"; + reg = <0x0a>; + gpio-controller; + }; + }; + + spi@7000 { + cell-index = <0>; + compatible = "fsl,spi"; + reg = <0x7000 0x1000>; + interrupts = <16 0x8>; + interrupt-parent = <&ipic>; + mode = "cpu"; + }; + + dma@82a8 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,mpc8315-dma", "fsl,elo-dma"; + reg = <0x82a8 4>; + ranges = <0 0x8100 0x1a8>; + interrupt-parent = <&ipic>; + interrupts = <71 8>; + cell-index = <0>; + dma-channel@0 { + compatible = "fsl,mpc8315-dma-channel", "fsl,elo-dma-channel"; + reg = <0 0x80>; + cell-index = <0>; + interrupt-parent = <&ipic>; + interrupts = <71 8>; + }; + dma-channel@80 { + compatible = "fsl,mpc8315-dma-channel", "fsl,elo-dma-channel"; + reg = <0x80 0x80>; + cell-index = <1>; + interrupt-parent = <&ipic>; + interrupts = <71 8>; + }; + dma-channel@100 { + compatible = "fsl,mpc8315-dma-channel", "fsl,elo-dma-channel"; + reg = <0x100 0x80>; + cell-index = <2>; + interrupt-parent = <&ipic>; + interrupts = <71 8>; + }; + dma-channel@180 { + compatible = "fsl,mpc8315-dma-channel", "fsl,elo-dma-channel"; + reg = <0x180 0x28>; + cell-index = <3>; + interrupt-parent = <&ipic>; + interrupts = <71 8>; + }; + }; + + usb@23000 { + compatible = "fsl-usb2-dr"; + reg = <0x23000 0x1000>; + #address-cells = <1>; + #size-cells = <0>; + interrupt-parent = <&ipic>; + interrupts = <38 0x8>; + phy_type = "utmi"; + }; + + enet0: ethernet@24000 { + #address-cells = <1>; + #size-cells = <1>; + cell-index = <0>; + device_type = "network"; + model = "eTSEC"; + compatible = "gianfar"; + reg = <0x24000 0x1000>; + ranges = <0x0 0x24000 0x1000>; + local-mac-address = [ 00 00 00 00 00 00 ]; + interrupts = <32 0x8 33 0x8 34 0x8>; + interrupt-parent = <&ipic>; + tbi-handle = <&tbi0>; + phy-handle = < &phy0 >; + fsl,magic-packet; + + mdio@520 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,gianfar-mdio"; + reg = <0x520 0x20>; + + phy0: ethernet-phy@0 { + interrupt-parent = <&ipic>; + interrupts = <20 0x8>; + reg = <0x0>; + }; + + phy1: ethernet-phy@1 { + interrupt-parent = <&ipic>; + interrupts = <19 0x8>; + reg = <0x1>; + }; + + tbi0: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + }; + + enet1: ethernet@25000 { + #address-cells = <1>; + #size-cells = <1>; + cell-index = <1>; + device_type = "network"; + model = "eTSEC"; + compatible = "gianfar"; + reg = <0x25000 0x1000>; + ranges = <0x0 0x25000 0x1000>; + local-mac-address = [ 00 00 00 00 00 00 ]; + interrupts = <35 0x8 36 0x8 37 0x8>; + interrupt-parent = <&ipic>; + tbi-handle = <&tbi1>; + phy-handle = < &phy1 >; + fsl,magic-packet; + + mdio@520 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,gianfar-tbi"; + reg = <0x520 0x20>; + + tbi1: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + }; + + serial0: serial@4500 { + cell-index = <0>; + device_type = "serial"; + compatible = "fsl,ns16550", "ns16550"; + reg = <0x4500 0x100>; + clock-frequency = <133333333>; + interrupts = <9 0x8>; + interrupt-parent = <&ipic>; + }; + + serial1: serial@4600 { + cell-index = <1>; + device_type = "serial"; + compatible = "fsl,ns16550", "ns16550"; + reg = <0x4600 0x100>; + clock-frequency = <133333333>; + interrupts = <10 0x8>; + interrupt-parent = <&ipic>; + }; + + crypto@30000 { + compatible = "fsl,sec3.3", "fsl,sec3.1", "fsl,sec3.0", + "fsl,sec2.4", "fsl,sec2.2", "fsl,sec2.1", + "fsl,sec2.0"; + reg = <0x30000 0x10000>; + interrupts = <11 0x8>; + interrupt-parent = <&ipic>; + fsl,num-channels = <4>; + fsl,channel-fifo-len = <24>; + fsl,exec-units-mask = <0x97c>; + fsl,descriptor-types-mask = <0x3a30abf>; + }; + + sata@18000 { + compatible = "fsl,mpc8315-sata", "fsl,pq-sata"; + reg = <0x18000 0x1000>; + cell-index = <1>; + interrupts = <44 0x8>; + interrupt-parent = <&ipic>; + }; + + sata@19000 { + compatible = "fsl,mpc8315-sata", "fsl,pq-sata"; + reg = <0x19000 0x1000>; + cell-index = <2>; + interrupts = <45 0x8>; + interrupt-parent = <&ipic>; + }; + + gtm1: timer@500 { + compatible = "fsl,mpc8315-gtm", "fsl,gtm"; + reg = <0x500 0x100>; + interrupts = <90 8 78 8 84 8 72 8>; + interrupt-parent = <&ipic>; + clock-frequency = <133333333>; + }; + + timer@600 { + compatible = "fsl,mpc8315-gtm", "fsl,gtm"; + reg = <0x600 0x100>; + interrupts = <91 8 79 8 85 8 73 8>; + interrupt-parent = <&ipic>; + clock-frequency = <133333333>; + }; + + /* IPIC + * interrupts cell = <intr #, sense> + * sense values match linux IORESOURCE_IRQ_* defines: + * sense == 8: Level, low assertion + * sense == 2: Edge, high-to-low change + */ + ipic: interrupt-controller@700 { + interrupt-controller; + #address-cells = <0>; + #interrupt-cells = <2>; + reg = <0x700 0x100>; + device_type = "ipic"; + }; + + ipic-msi@7c0 { + compatible = "fsl,ipic-msi"; + reg = <0x7c0 0x40>; + msi-available-ranges = <0 0x100>; + interrupts = <0x43 0x8 + 0x4 0x8 + 0x51 0x8 + 0x52 0x8 + 0x56 0x8 + 0x57 0x8 + 0x58 0x8 + 0x59 0x8>; + interrupt-parent = < &ipic >; + }; + + pmc: power@b00 { + compatible = "fsl,mpc8315-pmc", "fsl,mpc8313-pmc", + "fsl,mpc8349-pmc"; + reg = <0xb00 0x100 0xa00 0x100>; + interrupts = <80 8>; + interrupt-parent = <&ipic>; + fsl,mpc8313-wakeup-timer = <>m1>; + }; + }; + + pci0: pci@e0008500 { + interrupt-map-mask = <0xf800 0x0 0x0 0x7>; + interrupt-map = < + /* IDSEL 0x0E -mini PCI */ + 0x7000 0x0 0x0 0x1 &ipic 18 0x8 + 0x7000 0x0 0x0 0x2 &ipic 18 0x8 + 0x7000 0x0 0x0 0x3 &ipic 18 0x8 + 0x7000 0x0 0x0 0x4 &ipic 18 0x8 + + /* IDSEL 0x0F -mini PCI */ + 0x7800 0x0 0x0 0x1 &ipic 17 0x8 + 0x7800 0x0 0x0 0x2 &ipic 17 0x8 + 0x7800 0x0 0x0 0x3 &ipic 17 0x8 + 0x7800 0x0 0x0 0x4 &ipic 17 0x8 + + /* IDSEL 0x10 - PCI slot */ + 0x8000 0x0 0x0 0x1 &ipic 48 0x8 + 0x8000 0x0 0x0 0x2 &ipic 17 0x8 + 0x8000 0x0 0x0 0x3 &ipic 48 0x8 + 0x8000 0x0 0x0 0x4 &ipic 17 0x8>; + interrupt-parent = <&ipic>; + interrupts = <66 0x8>; + bus-range = <0x0 0x0>; + ranges = <0x02000000 0 0x90000000 0x90000000 0 0x10000000 + 0x42000000 0 0x80000000 0x80000000 0 0x10000000 + 0x01000000 0 0x00000000 0xe0300000 0 0x00100000>; + clock-frequency = <66666666>; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + reg = <0xe0008500 0x100 /* internal registers */ + 0xe0008300 0x8>; /* config space access registers */ + compatible = "fsl,mpc8349-pci"; + device_type = "pci"; + }; + + pci1: pcie@e0009000 { + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + device_type = "pci"; + compatible = "fsl,mpc8315-pcie", "fsl,mpc8314-pcie"; + reg = <0xe0009000 0x00001000>; + ranges = <0x02000000 0 0xa0000000 0xa0000000 0 0x10000000 + 0x01000000 0 0x00000000 0xb1000000 0 0x00800000>; + bus-range = <0 255>; + interrupt-map-mask = <0xf800 0 0 7>; + interrupt-map = <0 0 0 1 &ipic 1 8 + 0 0 0 2 &ipic 1 8 + 0 0 0 3 &ipic 1 8 + 0 0 0 4 &ipic 1 8>; + clock-frequency = <0>; + + pcie@0 { + #address-cells = <3>; + #size-cells = <2>; + device_type = "pci"; + reg = <0 0 0 0 0>; + ranges = <0x02000000 0 0xa0000000 + 0x02000000 0 0xa0000000 + 0 0x10000000 + 0x01000000 0 0x00000000 + 0x01000000 0 0x00000000 + 0 0x00800000>; + }; + }; + + pci2: pcie@e000a000 { + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + device_type = "pci"; + compatible = "fsl,mpc8315-pcie", "fsl,mpc8314-pcie"; + reg = <0xe000a000 0x00001000>; + ranges = <0x02000000 0 0xc0000000 0xc0000000 0 0x10000000 + 0x01000000 0 0x00000000 0xd1000000 0 0x00800000>; + bus-range = <0 255>; + interrupt-map-mask = <0xf800 0 0 7>; + interrupt-map = <0 0 0 1 &ipic 2 8 + 0 0 0 2 &ipic 2 8 + 0 0 0 3 &ipic 2 8 + 0 0 0 4 &ipic 2 8>; + clock-frequency = <0>; + + pcie@0 { + #address-cells = <3>; + #size-cells = <2>; + device_type = "pci"; + reg = <0 0 0 0 0>; + ranges = <0x02000000 0 0xc0000000 + 0x02000000 0 0xc0000000 + 0 0x10000000 + 0x01000000 0 0x00000000 + 0x01000000 0 0x00000000 + 0 0x00800000>; + }; + }; + + leds { + compatible = "gpio-leds"; + + pwr { + gpios = <&mcu_pio 0 0>; + default-state = "on"; + }; + + hdd { + gpios = <&mcu_pio 1 0>; + linux,default-trigger = "ide-disk"; + }; + }; +}; diff --git a/arch/powerpc/boot/dts/mpc832x_mds.dts b/arch/powerpc/boot/dts/mpc832x_mds.dts new file mode 100644 index 000000000..0793cdf0d --- /dev/null +++ b/arch/powerpc/boot/dts/mpc832x_mds.dts @@ -0,0 +1,439 @@ +/* + * MPC8323E EMDS Device Tree Source + * + * Copyright 2006 Freescale Semiconductor Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + + * To enable external serial I/O on a Freescale MPC 8323 SYS/MDS board, do + * this: + * + * 1) On chip U61, lift (disconnect) pins 21 (TXD) and 22 (RXD) from the board. + * 2) Solder a wire from U61-21 to P19A-23. P19 is a grid of pins on the board + * next to the serial ports. + * 3) Solder a wire from U61-22 to P19K-22. + * + * Note that there's a typo in the schematic. The board labels the last column + * of pins "P19K", but in the schematic, that column is called "P19J". So if + * you're going by the schematic, the pin is called "P19J-K22". + */ + +/dts-v1/; + +/ { + model = "MPC8323EMDS"; + compatible = "MPC8323EMDS", "MPC832xMDS", "MPC83xxMDS"; + #address-cells = <1>; + #size-cells = <1>; + + aliases { + ethernet0 = &enet0; + ethernet1 = &enet1; + serial0 = &serial0; + serial1 = &serial1; + pci0 = &pci0; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + PowerPC,8323@0 { + device_type = "cpu"; + reg = <0x0>; + d-cache-line-size = <32>; // 32 bytes + i-cache-line-size = <32>; // 32 bytes + d-cache-size = <16384>; // L1, 16K + i-cache-size = <16384>; // L1, 16K + timebase-frequency = <0>; + bus-frequency = <0>; + clock-frequency = <0>; + }; + }; + + memory { + device_type = "memory"; + reg = <0x00000000 0x08000000>; + }; + + bcsr@f8000000 { + compatible = "fsl,mpc8323mds-bcsr"; + reg = <0xf8000000 0x8000>; + }; + + soc8323@e0000000 { + #address-cells = <1>; + #size-cells = <1>; + device_type = "soc"; + compatible = "simple-bus"; + ranges = <0x0 0xe0000000 0x00100000>; + reg = <0xe0000000 0x00000200>; + bus-frequency = <132000000>; + + wdt@200 { + device_type = "watchdog"; + compatible = "mpc83xx_wdt"; + reg = <0x200 0x100>; + }; + + pmc: power@b00 { + compatible = "fsl,mpc8323-pmc", "fsl,mpc8349-pmc"; + reg = <0xb00 0x100 0xa00 0x100>; + interrupts = <80 0x8>; + interrupt-parent = <&ipic>; + }; + + i2c@3000 { + #address-cells = <1>; + #size-cells = <0>; + cell-index = <0>; + compatible = "fsl-i2c"; + reg = <0x3000 0x100>; + interrupts = <14 0x8>; + interrupt-parent = <&ipic>; + dfsrr; + + rtc@68 { + compatible = "dallas,ds1374"; + reg = <0x68>; + }; + }; + + serial0: serial@4500 { + cell-index = <0>; + device_type = "serial"; + compatible = "fsl,ns16550", "ns16550"; + reg = <0x4500 0x100>; + clock-frequency = <0>; + interrupts = <9 0x8>; + interrupt-parent = <&ipic>; + }; + + serial1: serial@4600 { + cell-index = <1>; + device_type = "serial"; + compatible = "fsl,ns16550", "ns16550"; + reg = <0x4600 0x100>; + clock-frequency = <0>; + interrupts = <10 0x8>; + interrupt-parent = <&ipic>; + }; + + dma@82a8 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,mpc8323-dma", "fsl,elo-dma"; + reg = <0x82a8 4>; + ranges = <0 0x8100 0x1a8>; + interrupt-parent = <&ipic>; + interrupts = <71 8>; + cell-index = <0>; + dma-channel@0 { + compatible = "fsl,mpc8323-dma-channel", "fsl,elo-dma-channel"; + reg = <0 0x80>; + cell-index = <0>; + interrupt-parent = <&ipic>; + interrupts = <71 8>; + }; + dma-channel@80 { + compatible = "fsl,mpc8323-dma-channel", "fsl,elo-dma-channel"; + reg = <0x80 0x80>; + cell-index = <1>; + interrupt-parent = <&ipic>; + interrupts = <71 8>; + }; + dma-channel@100 { + compatible = "fsl,mpc8323-dma-channel", "fsl,elo-dma-channel"; + reg = <0x100 0x80>; + cell-index = <2>; + interrupt-parent = <&ipic>; + interrupts = <71 8>; + }; + dma-channel@180 { + compatible = "fsl,mpc8323-dma-channel", "fsl,elo-dma-channel"; + reg = <0x180 0x28>; + cell-index = <3>; + interrupt-parent = <&ipic>; + interrupts = <71 8>; + }; + }; + + crypto@30000 { + compatible = "fsl,sec2.2", "fsl,sec2.1", "fsl,sec2.0"; + reg = <0x30000 0x10000>; + interrupts = <11 0x8>; + interrupt-parent = <&ipic>; + fsl,num-channels = <1>; + fsl,channel-fifo-len = <24>; + fsl,exec-units-mask = <0x4c>; + fsl,descriptor-types-mask = <0x0122003f>; + sleep = <&pmc 0x03000000>; + }; + + ipic: pic@700 { + interrupt-controller; + #address-cells = <0>; + #interrupt-cells = <2>; + reg = <0x700 0x100>; + device_type = "ipic"; + }; + + par_io@1400 { + reg = <0x1400 0x100>; + device_type = "par_io"; + num-ports = <7>; + + pio3: ucc_pin@03 { + pio-map = < + /* port pin dir open_drain assignment has_irq */ + 3 4 3 0 2 0 /* MDIO */ + 3 5 1 0 2 0 /* MDC */ + 0 13 2 0 1 0 /* RX_CLK (CLK9) */ + 3 24 2 0 1 0 /* TX_CLK (CLK10) */ + 1 0 1 0 1 0 /* TxD0 */ + 1 1 1 0 1 0 /* TxD1 */ + 1 2 1 0 1 0 /* TxD2 */ + 1 3 1 0 1 0 /* TxD3 */ + 1 4 2 0 1 0 /* RxD0 */ + 1 5 2 0 1 0 /* RxD1 */ + 1 6 2 0 1 0 /* RxD2 */ + 1 7 2 0 1 0 /* RxD3 */ + 1 8 2 0 1 0 /* RX_ER */ + 1 9 1 0 1 0 /* TX_ER */ + 1 10 2 0 1 0 /* RX_DV */ + 1 11 2 0 1 0 /* COL */ + 1 12 1 0 1 0 /* TX_EN */ + 1 13 2 0 1 0>; /* CRS */ + }; + pio4: ucc_pin@04 { + pio-map = < + /* port pin dir open_drain assignment has_irq */ + 3 31 2 0 1 0 /* RX_CLK (CLK7) */ + 3 6 2 0 1 0 /* TX_CLK (CLK8) */ + 1 18 1 0 1 0 /* TxD0 */ + 1 19 1 0 1 0 /* TxD1 */ + 1 20 1 0 1 0 /* TxD2 */ + 1 21 1 0 1 0 /* TxD3 */ + 1 22 2 0 1 0 /* RxD0 */ + 1 23 2 0 1 0 /* RxD1 */ + 1 24 2 0 1 0 /* RxD2 */ + 1 25 2 0 1 0 /* RxD3 */ + 1 26 2 0 1 0 /* RX_ER */ + 1 27 1 0 1 0 /* TX_ER */ + 1 28 2 0 1 0 /* RX_DV */ + 1 29 2 0 1 0 /* COL */ + 1 30 1 0 1 0 /* TX_EN */ + 1 31 2 0 1 0>; /* CRS */ + }; + pio5: ucc_pin@05 { + pio-map = < + /* + * open has + * port pin dir drain sel irq + */ + 2 0 1 0 2 0 /* TxD5 */ + 2 8 2 0 2 0 /* RxD5 */ + + 2 29 2 0 0 0 /* CTS5 */ + 2 31 1 0 2 0 /* RTS5 */ + + 2 24 2 0 0 0 /* CD */ + + >; + }; + + }; + }; + + qe@e0100000 { + #address-cells = <1>; + #size-cells = <1>; + device_type = "qe"; + compatible = "fsl,qe"; + ranges = <0x0 0xe0100000 0x00100000>; + reg = <0xe0100000 0x480>; + brg-frequency = <0>; + bus-frequency = <198000000>; + fsl,qe-num-riscs = <1>; + fsl,qe-num-snums = <28>; + + muram@10000 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,qe-muram", "fsl,cpm-muram"; + ranges = <0x0 0x00010000 0x00004000>; + + data-only@0 { + compatible = "fsl,qe-muram-data", + "fsl,cpm-muram-data"; + reg = <0x0 0x4000>; + }; + }; + + spi@4c0 { + cell-index = <0>; + compatible = "fsl,spi"; + reg = <0x4c0 0x40>; + interrupts = <2>; + interrupt-parent = <&qeic>; + mode = "cpu"; + }; + + spi@500 { + cell-index = <1>; + compatible = "fsl,spi"; + reg = <0x500 0x40>; + interrupts = <1>; + interrupt-parent = <&qeic>; + mode = "cpu"; + }; + + usb@6c0 { + compatible = "qe_udc"; + reg = <0x6c0 0x40 0x8b00 0x100>; + interrupts = <11>; + interrupt-parent = <&qeic>; + mode = "slave"; + }; + + enet0: ucc@2200 { + device_type = "network"; + compatible = "ucc_geth"; + cell-index = <3>; + reg = <0x2200 0x200>; + interrupts = <34>; + interrupt-parent = <&qeic>; + local-mac-address = [ 00 00 00 00 00 00 ]; + rx-clock-name = "clk9"; + tx-clock-name = "clk10"; + phy-handle = <&phy3>; + pio-handle = <&pio3>; + }; + + enet1: ucc@3200 { + device_type = "network"; + compatible = "ucc_geth"; + cell-index = <4>; + reg = <0x3200 0x200>; + interrupts = <35>; + interrupt-parent = <&qeic>; + local-mac-address = [ 00 00 00 00 00 00 ]; + rx-clock-name = "clk7"; + tx-clock-name = "clk8"; + phy-handle = <&phy4>; + pio-handle = <&pio4>; + }; + + ucc@2400 { + device_type = "serial"; + compatible = "ucc_uart"; + cell-index = <5>; /* The UCC number, 1-7*/ + port-number = <0>; /* Which ttyQEx device */ + soft-uart; /* We need Soft-UART */ + reg = <0x2400 0x200>; + interrupts = <40>; /* From Table 18-12 */ + interrupt-parent = < &qeic >; + /* + * For Soft-UART, we need to set TX to 1X, which + * means specifying separate clock sources. + */ + rx-clock-name = "brg5"; + tx-clock-name = "brg6"; + pio-handle = < &pio5 >; + }; + + + mdio@2320 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x2320 0x18>; + compatible = "fsl,ucc-mdio"; + + phy3: ethernet-phy@03 { + interrupt-parent = <&ipic>; + interrupts = <17 0x8>; + reg = <0x3>; + }; + phy4: ethernet-phy@04 { + interrupt-parent = <&ipic>; + interrupts = <18 0x8>; + reg = <0x4>; + }; + }; + + qeic: interrupt-controller@80 { + interrupt-controller; + compatible = "fsl,qe-ic"; + #address-cells = <0>; + #interrupt-cells = <1>; + reg = <0x80 0x80>; + big-endian; + interrupts = <32 0x8 33 0x8>; //high:32 low:33 + interrupt-parent = <&ipic>; + }; + }; + + pci0: pci@e0008500 { + interrupt-map-mask = <0xf800 0x0 0x0 0x7>; + interrupt-map = < + /* IDSEL 0x11 AD17 */ + 0x8800 0x0 0x0 0x1 &ipic 20 0x8 + 0x8800 0x0 0x0 0x2 &ipic 21 0x8 + 0x8800 0x0 0x0 0x3 &ipic 22 0x8 + 0x8800 0x0 0x0 0x4 &ipic 23 0x8 + + /* IDSEL 0x12 AD18 */ + 0x9000 0x0 0x0 0x1 &ipic 22 0x8 + 0x9000 0x0 0x0 0x2 &ipic 23 0x8 + 0x9000 0x0 0x0 0x3 &ipic 20 0x8 + 0x9000 0x0 0x0 0x4 &ipic 21 0x8 + + /* IDSEL 0x13 AD19 */ + 0x9800 0x0 0x0 0x1 &ipic 23 0x8 + 0x9800 0x0 0x0 0x2 &ipic 20 0x8 + 0x9800 0x0 0x0 0x3 &ipic 21 0x8 + 0x9800 0x0 0x0 0x4 &ipic 22 0x8 + + /* IDSEL 0x15 AD21*/ + 0xa800 0x0 0x0 0x1 &ipic 20 0x8 + 0xa800 0x0 0x0 0x2 &ipic 21 0x8 + 0xa800 0x0 0x0 0x3 &ipic 22 0x8 + 0xa800 0x0 0x0 0x4 &ipic 23 0x8 + + /* IDSEL 0x16 AD22*/ + 0xb000 0x0 0x0 0x1 &ipic 23 0x8 + 0xb000 0x0 0x0 0x2 &ipic 20 0x8 + 0xb000 0x0 0x0 0x3 &ipic 21 0x8 + 0xb000 0x0 0x0 0x4 &ipic 22 0x8 + + /* IDSEL 0x17 AD23*/ + 0xb800 0x0 0x0 0x1 &ipic 22 0x8 + 0xb800 0x0 0x0 0x2 &ipic 23 0x8 + 0xb800 0x0 0x0 0x3 &ipic 20 0x8 + 0xb800 0x0 0x0 0x4 &ipic 21 0x8 + + /* IDSEL 0x18 AD24*/ + 0xc000 0x0 0x0 0x1 &ipic 21 0x8 + 0xc000 0x0 0x0 0x2 &ipic 22 0x8 + 0xc000 0x0 0x0 0x3 &ipic 23 0x8 + 0xc000 0x0 0x0 0x4 &ipic 20 0x8>; + interrupt-parent = <&ipic>; + interrupts = <66 0x8>; + bus-range = <0x0 0x0>; + ranges = <0x02000000 0x0 0x90000000 0x90000000 0x0 0x10000000 + 0x42000000 0x0 0x80000000 0x80000000 0x0 0x10000000 + 0x01000000 0x0 0x00000000 0xd0000000 0x0 0x00100000>; + clock-frequency = <0>; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + reg = <0xe0008500 0x100 /* internal registers */ + 0xe0008300 0x8>; /* config space access registers */ + compatible = "fsl,mpc8349-pci"; + device_type = "pci"; + sleep = <&pmc 0x00010000>; + }; +}; diff --git a/arch/powerpc/boot/dts/mpc832x_rdb.dts b/arch/powerpc/boot/dts/mpc832x_rdb.dts new file mode 100644 index 000000000..91df1eb16 --- /dev/null +++ b/arch/powerpc/boot/dts/mpc832x_rdb.dts @@ -0,0 +1,371 @@ +/* + * MPC832x RDB Device Tree Source + * + * Copyright 2007 Freescale Semiconductor Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +/dts-v1/; + +/ { + model = "MPC8323ERDB"; + compatible = "MPC8323ERDB", "MPC832xRDB", "MPC83xxRDB"; + #address-cells = <1>; + #size-cells = <1>; + + aliases { + ethernet0 = &enet1; + ethernet1 = &enet0; + serial0 = &serial0; + serial1 = &serial1; + pci0 = &pci0; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + PowerPC,8323@0 { + device_type = "cpu"; + reg = <0x0>; + d-cache-line-size = <0x20>; // 32 bytes + i-cache-line-size = <0x20>; // 32 bytes + d-cache-size = <16384>; // L1, 16K + i-cache-size = <16384>; // L1, 16K + timebase-frequency = <0>; + bus-frequency = <0>; + clock-frequency = <0>; + }; + }; + + memory { + device_type = "memory"; + reg = <0x00000000 0x04000000>; + }; + + soc8323@e0000000 { + #address-cells = <1>; + #size-cells = <1>; + device_type = "soc"; + compatible = "simple-bus"; + ranges = <0x0 0xe0000000 0x00100000>; + reg = <0xe0000000 0x00000200>; + bus-frequency = <0>; + + wdt@200 { + device_type = "watchdog"; + compatible = "mpc83xx_wdt"; + reg = <0x200 0x100>; + }; + + pmc: power@b00 { + compatible = "fsl,mpc8323-pmc", "fsl,mpc8349-pmc"; + reg = <0xb00 0x100 0xa00 0x100>; + interrupts = <80 0x8>; + interrupt-parent = <&ipic>; + }; + + i2c@3000 { + #address-cells = <1>; + #size-cells = <0>; + cell-index = <0>; + compatible = "fsl-i2c"; + reg = <0x3000 0x100>; + interrupts = <14 0x8>; + interrupt-parent = <&ipic>; + dfsrr; + }; + + serial0: serial@4500 { + cell-index = <0>; + device_type = "serial"; + compatible = "fsl,ns16550", "ns16550"; + reg = <0x4500 0x100>; + clock-frequency = <0>; + interrupts = <9 0x8>; + interrupt-parent = <&ipic>; + }; + + serial1: serial@4600 { + cell-index = <1>; + device_type = "serial"; + compatible = "fsl,ns16550", "ns16550"; + reg = <0x4600 0x100>; + clock-frequency = <0>; + interrupts = <10 0x8>; + interrupt-parent = <&ipic>; + }; + + dma@82a8 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,mpc8323-dma", "fsl,elo-dma"; + reg = <0x82a8 4>; + ranges = <0 0x8100 0x1a8>; + interrupt-parent = <&ipic>; + interrupts = <71 8>; + cell-index = <0>; + dma-channel@0 { + compatible = "fsl,mpc8323-dma-channel", "fsl,elo-dma-channel"; + reg = <0 0x80>; + cell-index = <0>; + interrupt-parent = <&ipic>; + interrupts = <71 8>; + }; + dma-channel@80 { + compatible = "fsl,mpc8323-dma-channel", "fsl,elo-dma-channel"; + reg = <0x80 0x80>; + cell-index = <1>; + interrupt-parent = <&ipic>; + interrupts = <71 8>; + }; + dma-channel@100 { + compatible = "fsl,mpc8323-dma-channel", "fsl,elo-dma-channel"; + reg = <0x100 0x80>; + cell-index = <2>; + interrupt-parent = <&ipic>; + interrupts = <71 8>; + }; + dma-channel@180 { + compatible = "fsl,mpc8323-dma-channel", "fsl,elo-dma-channel"; + reg = <0x180 0x28>; + cell-index = <3>; + interrupt-parent = <&ipic>; + interrupts = <71 8>; + }; + }; + + crypto@30000 { + compatible = "fsl,sec2.2", "fsl,sec2.1", "fsl,sec2.0"; + reg = <0x30000 0x10000>; + interrupts = <11 0x8>; + interrupt-parent = <&ipic>; + fsl,num-channels = <1>; + fsl,channel-fifo-len = <24>; + fsl,exec-units-mask = <0x4c>; + fsl,descriptor-types-mask = <0x0122003f>; + sleep = <&pmc 0x03000000>; + }; + + ipic:pic@700 { + interrupt-controller; + #address-cells = <0>; + #interrupt-cells = <2>; + reg = <0x700 0x100>; + device_type = "ipic"; + }; + + par_io@1400 { + #address-cells = <1>; + #size-cells = <1>; + reg = <0x1400 0x100>; + ranges = <3 0x1448 0x18>; + compatible = "fsl,mpc8323-qe-pario"; + device_type = "par_io"; + num-ports = <7>; + + qe_pio_d: gpio-controller@1448 { + #gpio-cells = <2>; + compatible = "fsl,mpc8323-qe-pario-bank"; + reg = <3 0x18>; + gpio-controller; + }; + + ucc2pio:ucc_pin@02 { + pio-map = < + /* port pin dir open_drain assignment has_irq */ + 3 4 3 0 2 0 /* MDIO */ + 3 5 1 0 2 0 /* MDC */ + 3 21 2 0 1 0 /* RX_CLK (CLK16) */ + 3 23 2 0 1 0 /* TX_CLK (CLK3) */ + 0 18 1 0 1 0 /* TxD0 */ + 0 19 1 0 1 0 /* TxD1 */ + 0 20 1 0 1 0 /* TxD2 */ + 0 21 1 0 1 0 /* TxD3 */ + 0 22 2 0 1 0 /* RxD0 */ + 0 23 2 0 1 0 /* RxD1 */ + 0 24 2 0 1 0 /* RxD2 */ + 0 25 2 0 1 0 /* RxD3 */ + 0 26 2 0 1 0 /* RX_ER */ + 0 27 1 0 1 0 /* TX_ER */ + 0 28 2 0 1 0 /* RX_DV */ + 0 29 2 0 1 0 /* COL */ + 0 30 1 0 1 0 /* TX_EN */ + 0 31 2 0 1 0>; /* CRS */ + }; + ucc3pio:ucc_pin@03 { + pio-map = < + /* port pin dir open_drain assignment has_irq */ + 0 13 2 0 1 0 /* RX_CLK (CLK9) */ + 3 24 2 0 1 0 /* TX_CLK (CLK10) */ + 1 0 1 0 1 0 /* TxD0 */ + 1 1 1 0 1 0 /* TxD1 */ + 1 2 1 0 1 0 /* TxD2 */ + 1 3 1 0 1 0 /* TxD3 */ + 1 4 2 0 1 0 /* RxD0 */ + 1 5 2 0 1 0 /* RxD1 */ + 1 6 2 0 1 0 /* RxD2 */ + 1 7 2 0 1 0 /* RxD3 */ + 1 8 2 0 1 0 /* RX_ER */ + 1 9 1 0 1 0 /* TX_ER */ + 1 10 2 0 1 0 /* RX_DV */ + 1 11 2 0 1 0 /* COL */ + 1 12 1 0 1 0 /* TX_EN */ + 1 13 2 0 1 0>; /* CRS */ + }; + }; + }; + + qe@e0100000 { + #address-cells = <1>; + #size-cells = <1>; + device_type = "qe"; + compatible = "fsl,qe"; + ranges = <0x0 0xe0100000 0x00100000>; + reg = <0xe0100000 0x480>; + brg-frequency = <0>; + bus-frequency = <198000000>; + fsl,qe-num-riscs = <1>; + fsl,qe-num-snums = <28>; + + muram@10000 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,qe-muram", "fsl,cpm-muram"; + ranges = <0x0 0x00010000 0x00004000>; + + data-only@0 { + compatible = "fsl,qe-muram-data", + "fsl,cpm-muram-data"; + reg = <0x0 0x4000>; + }; + }; + + spi@4c0 { + #address-cells = <1>; + #size-cells = <0>; + cell-index = <0>; + compatible = "fsl,spi"; + reg = <0x4c0 0x40>; + interrupts = <2>; + interrupt-parent = <&qeic>; + gpios = <&qe_pio_d 13 0>; + mode = "cpu-qe"; + + mmc-slot@0 { + compatible = "fsl,mpc8323rdb-mmc-slot", + "mmc-spi-slot"; + reg = <0>; + gpios = <&qe_pio_d 14 1 + &qe_pio_d 15 0>; + voltage-ranges = <3300 3300>; + spi-max-frequency = <50000000>; + }; + }; + + spi@500 { + cell-index = <1>; + compatible = "fsl,spi"; + reg = <0x500 0x40>; + interrupts = <1>; + interrupt-parent = <&qeic>; + mode = "cpu"; + }; + + enet0: ucc@3000 { + device_type = "network"; + compatible = "ucc_geth"; + cell-index = <2>; + reg = <0x3000 0x200>; + interrupts = <33>; + interrupt-parent = <&qeic>; + local-mac-address = [ 00 00 00 00 00 00 ]; + rx-clock-name = "clk16"; + tx-clock-name = "clk3"; + phy-handle = <&phy00>; + pio-handle = <&ucc2pio>; + }; + + enet1: ucc@2200 { + device_type = "network"; + compatible = "ucc_geth"; + cell-index = <3>; + reg = <0x2200 0x200>; + interrupts = <34>; + interrupt-parent = <&qeic>; + local-mac-address = [ 00 00 00 00 00 00 ]; + rx-clock-name = "clk9"; + tx-clock-name = "clk10"; + phy-handle = <&phy04>; + pio-handle = <&ucc3pio>; + }; + + mdio@3120 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x3120 0x18>; + compatible = "fsl,ucc-mdio"; + + phy00:ethernet-phy@00 { + interrupt-parent = <&ipic>; + interrupts = <0>; + reg = <0x0>; + }; + phy04:ethernet-phy@04 { + interrupt-parent = <&ipic>; + interrupts = <0>; + reg = <0x4>; + }; + }; + + qeic:interrupt-controller@80 { + interrupt-controller; + compatible = "fsl,qe-ic"; + #address-cells = <0>; + #interrupt-cells = <1>; + reg = <0x80 0x80>; + big-endian; + interrupts = <32 0x8 33 0x8>; //high:32 low:33 + interrupt-parent = <&ipic>; + }; + }; + + pci0: pci@e0008500 { + interrupt-map-mask = <0xf800 0x0 0x0 0x7>; + interrupt-map = < + /* IDSEL 0x10 AD16 (USB) */ + 0x8000 0x0 0x0 0x1 &ipic 17 0x8 + + /* IDSEL 0x11 AD17 (Mini1)*/ + 0x8800 0x0 0x0 0x1 &ipic 18 0x8 + 0x8800 0x0 0x0 0x2 &ipic 19 0x8 + 0x8800 0x0 0x0 0x3 &ipic 20 0x8 + 0x8800 0x0 0x0 0x4 &ipic 48 0x8 + + /* IDSEL 0x12 AD18 (PCI/Mini2) */ + 0x9000 0x0 0x0 0x1 &ipic 19 0x8 + 0x9000 0x0 0x0 0x2 &ipic 20 0x8 + 0x9000 0x0 0x0 0x3 &ipic 48 0x8 + 0x9000 0x0 0x0 0x4 &ipic 17 0x8>; + + interrupt-parent = <&ipic>; + interrupts = <66 0x8>; + bus-range = <0x0 0x0>; + ranges = <0x42000000 0x0 0x80000000 0x80000000 0x0 0x10000000 + 0x02000000 0x0 0x90000000 0x90000000 0x0 0x10000000 + 0x01000000 0x0 0xd0000000 0xd0000000 0x0 0x04000000>; + clock-frequency = <0>; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + reg = <0xe0008500 0x100 /* internal registers */ + 0xe0008300 0x8>; /* config space access registers */ + compatible = "fsl,mpc8349-pci"; + device_type = "pci"; + sleep = <&pmc 0x00010000>; + }; +}; diff --git a/arch/powerpc/boot/dts/mpc8349emitx.dts b/arch/powerpc/boot/dts/mpc8349emitx.dts new file mode 100644 index 000000000..cf8542401 --- /dev/null +++ b/arch/powerpc/boot/dts/mpc8349emitx.dts @@ -0,0 +1,425 @@ +/* + * MPC8349E-mITX Device Tree Source + * + * Copyright 2006 Freescale Semiconductor Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +/dts-v1/; + +/ { + model = "MPC8349EMITX"; + compatible = "MPC8349EMITX", "MPC834xMITX", "MPC83xxMITX"; + #address-cells = <1>; + #size-cells = <1>; + + aliases { + ethernet0 = &enet0; + ethernet1 = &enet1; + serial0 = &serial0; + serial1 = &serial1; + pci0 = &pci0; + pci1 = &pci1; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + PowerPC,8349@0 { + device_type = "cpu"; + reg = <0x0>; + d-cache-line-size = <32>; + i-cache-line-size = <32>; + d-cache-size = <32768>; + i-cache-size = <32768>; + timebase-frequency = <0>; // from bootloader + bus-frequency = <0>; // from bootloader + clock-frequency = <0>; // from bootloader + }; + }; + + memory { + device_type = "memory"; + reg = <0x00000000 0x10000000>; + }; + + soc8349@e0000000 { + #address-cells = <1>; + #size-cells = <1>; + device_type = "soc"; + compatible = "simple-bus"; + ranges = <0x0 0xe0000000 0x00100000>; + reg = <0xe0000000 0x00000200>; + bus-frequency = <0>; // from bootloader + + wdt@200 { + device_type = "watchdog"; + compatible = "mpc83xx_wdt"; + reg = <0x200 0x100>; + }; + + gpio1: gpio-controller@c00 { + #gpio-cells = <2>; + compatible = "fsl,mpc8349-gpio"; + reg = <0xc00 0x100>; + interrupts = <74 0x8>; + interrupt-parent = <&ipic>; + gpio-controller; + }; + + gpio2: gpio-controller@d00 { + #gpio-cells = <2>; + compatible = "fsl,mpc8349-gpio"; + reg = <0xd00 0x100>; + interrupts = <75 0x8>; + interrupt-parent = <&ipic>; + gpio-controller; + }; + + i2c@3000 { + #address-cells = <1>; + #size-cells = <0>; + cell-index = <0>; + compatible = "fsl-i2c"; + reg = <0x3000 0x100>; + interrupts = <14 0x8>; + interrupt-parent = <&ipic>; + dfsrr; + + eeprom: at24@50 { + compatible = "st-micro,24c256"; + reg = <0x50>; + }; + + }; + + i2c@3100 { + #address-cells = <1>; + #size-cells = <0>; + cell-index = <1>; + compatible = "fsl-i2c"; + reg = <0x3100 0x100>; + interrupts = <15 0x8>; + interrupt-parent = <&ipic>; + dfsrr; + + rtc@68 { + compatible = "dallas,ds1339"; + reg = <0x68>; + interrupts = <18 0x8>; + interrupt-parent = <&ipic>; + }; + + pcf1: iexp@38 { + #gpio-cells = <2>; + compatible = "ti,pcf8574a"; + reg = <0x38>; + gpio-controller; + }; + + pcf2: iexp@39 { + #gpio-cells = <2>; + compatible = "ti,pcf8574a"; + reg = <0x39>; + gpio-controller; + }; + + spd: at24@51 { + compatible = "at24,spd"; + reg = <0x51>; + }; + + mcu_pio: mcu@a { + #gpio-cells = <2>; + compatible = "fsl,mc9s08qg8-mpc8349emitx", + "fsl,mcu-mpc8349emitx"; + reg = <0x0a>; + gpio-controller; + }; + }; + + spi@7000 { + cell-index = <0>; + compatible = "fsl,spi"; + reg = <0x7000 0x1000>; + interrupts = <16 0x8>; + interrupt-parent = <&ipic>; + mode = "cpu"; + }; + + dma@82a8 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,mpc8349-dma", "fsl,elo-dma"; + reg = <0x82a8 4>; + ranges = <0 0x8100 0x1a8>; + interrupt-parent = <&ipic>; + interrupts = <71 8>; + cell-index = <0>; + dma-channel@0 { + compatible = "fsl,mpc8349-dma-channel", "fsl,elo-dma-channel"; + reg = <0 0x80>; + cell-index = <0>; + interrupt-parent = <&ipic>; + interrupts = <71 8>; + }; + dma-channel@80 { + compatible = "fsl,mpc8349-dma-channel", "fsl,elo-dma-channel"; + reg = <0x80 0x80>; + cell-index = <1>; + interrupt-parent = <&ipic>; + interrupts = <71 8>; + }; + dma-channel@100 { + compatible = "fsl,mpc8349-dma-channel", "fsl,elo-dma-channel"; + reg = <0x100 0x80>; + cell-index = <2>; + interrupt-parent = <&ipic>; + interrupts = <71 8>; + }; + dma-channel@180 { + compatible = "fsl,mpc8349-dma-channel", "fsl,elo-dma-channel"; + reg = <0x180 0x28>; + cell-index = <3>; + interrupt-parent = <&ipic>; + interrupts = <71 8>; + }; + }; + + usb@22000 { + compatible = "fsl-usb2-mph"; + reg = <0x22000 0x1000>; + #address-cells = <1>; + #size-cells = <0>; + interrupt-parent = <&ipic>; + interrupts = <39 0x8>; + phy_type = "ulpi"; + port0; + }; + + usb@23000 { + compatible = "fsl-usb2-dr"; + reg = <0x23000 0x1000>; + #address-cells = <1>; + #size-cells = <0>; + interrupt-parent = <&ipic>; + interrupts = <38 0x8>; + dr_mode = "peripheral"; + phy_type = "ulpi"; + }; + + enet0: ethernet@24000 { + #address-cells = <1>; + #size-cells = <1>; + cell-index = <0>; + device_type = "network"; + model = "TSEC"; + compatible = "gianfar"; + reg = <0x24000 0x1000>; + ranges = <0x0 0x24000 0x1000>; + local-mac-address = [ 00 00 00 00 00 00 ]; + interrupts = <32 0x8 33 0x8 34 0x8>; + interrupt-parent = <&ipic>; + tbi-handle = <&tbi0>; + phy-handle = <&phy1c>; + linux,network-index = <0>; + + mdio@520 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,gianfar-mdio"; + reg = <0x520 0x20>; + + /* Vitesse 8201 */ + phy1c: ethernet-phy@1c { + interrupt-parent = <&ipic>; + interrupts = <18 0x8>; + reg = <0x1c>; + }; + + tbi0: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + }; + + enet1: ethernet@25000 { + #address-cells = <1>; + #size-cells = <1>; + cell-index = <1>; + device_type = "network"; + model = "TSEC"; + compatible = "gianfar"; + reg = <0x25000 0x1000>; + ranges = <0x0 0x25000 0x1000>; + local-mac-address = [ 00 00 00 00 00 00 ]; + interrupts = <35 0x8 36 0x8 37 0x8>; + interrupt-parent = <&ipic>; + /* Vitesse 7385 isn't on the MDIO bus */ + fixed-link = <1 1 1000 0 0>; + linux,network-index = <1>; + tbi-handle = <&tbi1>; + + mdio@520 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,gianfar-tbi"; + reg = <0x520 0x20>; + + tbi1: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + }; + + serial0: serial@4500 { + cell-index = <0>; + device_type = "serial"; + compatible = "fsl,ns16550", "ns16550"; + reg = <0x4500 0x100>; + clock-frequency = <0>; // from bootloader + interrupts = <9 0x8>; + interrupt-parent = <&ipic>; + }; + + serial1: serial@4600 { + cell-index = <1>; + device_type = "serial"; + compatible = "fsl,ns16550", "ns16550"; + reg = <0x4600 0x100>; + clock-frequency = <0>; // from bootloader + interrupts = <10 0x8>; + interrupt-parent = <&ipic>; + }; + + crypto@30000 { + compatible = "fsl,sec2.0"; + reg = <0x30000 0x10000>; + interrupts = <11 0x8>; + interrupt-parent = <&ipic>; + fsl,num-channels = <4>; + fsl,channel-fifo-len = <24>; + fsl,exec-units-mask = <0x7e>; + fsl,descriptor-types-mask = <0x01010ebf>; + }; + + ipic: pic@700 { + interrupt-controller; + #address-cells = <0>; + #interrupt-cells = <2>; + reg = <0x700 0x100>; + device_type = "ipic"; + }; + + gpio-leds { + compatible = "gpio-leds"; + + green { + label = "Green"; + gpios = <&pcf1 0 1>; + linux,default-trigger = "heartbeat"; + }; + + yellow { + label = "Yellow"; + gpios = <&pcf1 1 1>; + /* linux,default-trigger = "heartbeat"; */ + default-state = "on"; + }; + }; + + }; + + pci0: pci@e0008500 { + interrupt-map-mask = <0xf800 0x0 0x0 0x7>; + interrupt-map = < + /* IDSEL 0x10 - SATA */ + 0x8000 0x0 0x0 0x1 &ipic 22 0x8 /* SATA_INTA */ + >; + interrupt-parent = <&ipic>; + interrupts = <66 0x8>; + bus-range = <0x0 0x0>; + ranges = <0x42000000 0x0 0x80000000 0x80000000 0x0 0x10000000 + 0x02000000 0x0 0x90000000 0x90000000 0x0 0x10000000 + 0x01000000 0x0 0x00000000 0xe2000000 0x0 0x01000000>; + clock-frequency = <66666666>; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + reg = <0xe0008500 0x100 /* internal registers */ + 0xe0008300 0x8>; /* config space access registers */ + compatible = "fsl,mpc8349-pci"; + device_type = "pci"; + }; + + pci1: pci@e0008600 { + interrupt-map-mask = <0xf800 0x0 0x0 0x7>; + interrupt-map = < + /* IDSEL 0x0E - MiniPCI Slot */ + 0x7000 0x0 0x0 0x1 &ipic 21 0x8 /* PCI_INTA */ + + /* IDSEL 0x0F - PCI Slot */ + 0x7800 0x0 0x0 0x1 &ipic 20 0x8 /* PCI_INTA */ + 0x7800 0x0 0x0 0x2 &ipic 21 0x8 /* PCI_INTB */ + >; + interrupt-parent = <&ipic>; + interrupts = <67 0x8>; + bus-range = <0x0 0x0>; + ranges = <0x42000000 0x0 0xa0000000 0xa0000000 0x0 0x10000000 + 0x02000000 0x0 0xb0000000 0xb0000000 0x0 0x10000000 + 0x01000000 0x0 0x00000000 0xe3000000 0x0 0x01000000>; + clock-frequency = <66666666>; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + reg = <0xe0008600 0x100 /* internal registers */ + 0xe0008380 0x8>; /* config space access registers */ + compatible = "fsl,mpc8349-pci"; + device_type = "pci"; + }; + + localbus@e0005000 { + #address-cells = <2>; + #size-cells = <1>; + compatible = "fsl,mpc8349e-localbus", + "fsl,pq2pro-localbus", + "simple-bus"; + reg = <0xe0005000 0xd8>; + ranges = <0x0 0x0 0xfe000000 0x1000000 /* flash */ + 0x1 0x0 0xf8000000 0x20000 /* VSC 7385 */ + 0x2 0x0 0xf9000000 0x200000 /* exp slot */ + 0x3 0x0 0xf0000000 0x210>; /* CF slot */ + + flash@0,0 { + compatible = "cfi-flash"; + reg = <0x0 0x0 0x800000>; + bank-width = <2>; + device-width = <1>; + }; + + flash@0,800000 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "cfi-flash"; + reg = <0x0 0x800000 0x800000>; + bank-width = <2>; + device-width = <1>; + }; + + pata@3,0 { + compatible = "fsl,mpc8349emitx-pata", "ata-generic"; + reg = <0x3 0x0 0x10 0x3 0x20c 0x4>; + reg-shift = <1>; + pio-mode = <6>; + interrupts = <23 0x8>; + interrupt-parent = <&ipic>; + }; + }; +}; diff --git a/arch/powerpc/boot/dts/mpc8349emitxgp.dts b/arch/powerpc/boot/dts/mpc8349emitxgp.dts new file mode 100644 index 000000000..f00066dcc --- /dev/null +++ b/arch/powerpc/boot/dts/mpc8349emitxgp.dts @@ -0,0 +1,250 @@ +/* + * MPC8349E-mITX-GP Device Tree Source + * + * Copyright 2007 Freescale Semiconductor Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +/dts-v1/; + +/ { + model = "MPC8349EMITXGP"; + compatible = "MPC8349EMITXGP", "MPC834xMITX", "MPC83xxMITX"; + #address-cells = <1>; + #size-cells = <1>; + + aliases { + ethernet0 = &enet0; + serial0 = &serial0; + serial1 = &serial1; + pci0 = &pci0; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + PowerPC,8349@0 { + device_type = "cpu"; + reg = <0x0>; + d-cache-line-size = <32>; + i-cache-line-size = <32>; + d-cache-size = <32768>; + i-cache-size = <32768>; + timebase-frequency = <0>; // from bootloader + bus-frequency = <0>; // from bootloader + clock-frequency = <0>; // from bootloader + }; + }; + + memory { + device_type = "memory"; + reg = <0x00000000 0x10000000>; + }; + + soc8349@e0000000 { + #address-cells = <1>; + #size-cells = <1>; + device_type = "soc"; + compatible = "simple-bus"; + ranges = <0x0 0xe0000000 0x00100000>; + reg = <0xe0000000 0x00000200>; + bus-frequency = <0>; // from bootloader + + wdt@200 { + device_type = "watchdog"; + compatible = "mpc83xx_wdt"; + reg = <0x200 0x100>; + }; + + i2c@3000 { + #address-cells = <1>; + #size-cells = <0>; + cell-index = <0>; + compatible = "fsl-i2c"; + reg = <0x3000 0x100>; + interrupts = <14 0x8>; + interrupt-parent = <&ipic>; + dfsrr; + }; + + i2c@3100 { + #address-cells = <1>; + #size-cells = <0>; + cell-index = <1>; + compatible = "fsl-i2c"; + reg = <0x3100 0x100>; + interrupts = <15 0x8>; + interrupt-parent = <&ipic>; + dfsrr; + + rtc@68 { + compatible = "dallas,ds1339"; + reg = <0x68>; + interrupts = <18 0x8>; + interrupt-parent = <&ipic>; + }; + }; + + spi@7000 { + cell-index = <0>; + compatible = "fsl,spi"; + reg = <0x7000 0x1000>; + interrupts = <16 0x8>; + interrupt-parent = <&ipic>; + mode = "cpu"; + }; + + dma@82a8 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,mpc8349-dma", "fsl,elo-dma"; + reg = <0x82a8 4>; + ranges = <0 0x8100 0x1a8>; + interrupt-parent = <&ipic>; + interrupts = <71 8>; + cell-index = <0>; + dma-channel@0 { + compatible = "fsl,mpc8349-dma-channel", "fsl,elo-dma-channel"; + reg = <0 0x80>; + cell-index = <0>; + interrupt-parent = <&ipic>; + interrupts = <71 8>; + }; + dma-channel@80 { + compatible = "fsl,mpc8349-dma-channel", "fsl,elo-dma-channel"; + reg = <0x80 0x80>; + cell-index = <1>; + interrupt-parent = <&ipic>; + interrupts = <71 8>; + }; + dma-channel@100 { + compatible = "fsl,mpc8349-dma-channel", "fsl,elo-dma-channel"; + reg = <0x100 0x80>; + cell-index = <2>; + interrupt-parent = <&ipic>; + interrupts = <71 8>; + }; + dma-channel@180 { + compatible = "fsl,mpc8349-dma-channel", "fsl,elo-dma-channel"; + reg = <0x180 0x28>; + cell-index = <3>; + interrupt-parent = <&ipic>; + interrupts = <71 8>; + }; + }; + + usb@23000 { + compatible = "fsl-usb2-dr"; + reg = <0x23000 0x1000>; + #address-cells = <1>; + #size-cells = <0>; + interrupt-parent = <&ipic>; + interrupts = <38 0x8>; + dr_mode = "otg"; + phy_type = "ulpi"; + }; + + enet0: ethernet@24000 { + #address-cells = <1>; + #size-cells = <1>; + cell-index = <0>; + device_type = "network"; + model = "TSEC"; + compatible = "gianfar"; + reg = <0x24000 0x1000>; + ranges = <0x0 0x24000 0x1000>; + local-mac-address = [ 00 00 00 00 00 00 ]; + interrupts = <32 0x8 33 0x8 34 0x8>; + interrupt-parent = <&ipic>; + tbi-handle = <&tbi0>; + phy-handle = <&phy1c>; + linux,network-index = <0>; + + mdio@520 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,gianfar-mdio"; + reg = <0x520 0x20>; + + /* Vitesse 8201 */ + phy1c: ethernet-phy@1c { + interrupt-parent = <&ipic>; + interrupts = <18 0x8>; + reg = <0x1c>; + }; + + tbi0: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + }; + + serial0: serial@4500 { + cell-index = <0>; + device_type = "serial"; + compatible = "fsl,ns16550", "ns16550"; + reg = <0x4500 0x100>; + clock-frequency = <0>; // from bootloader + interrupts = <9 0x8>; + interrupt-parent = <&ipic>; + }; + + serial1: serial@4600 { + cell-index = <1>; + device_type = "serial"; + compatible = "fsl,ns16550", "ns16550"; + reg = <0x4600 0x100>; + clock-frequency = <0>; // from bootloader + interrupts = <10 0x8>; + interrupt-parent = <&ipic>; + }; + + crypto@30000 { + compatible = "fsl,sec2.0"; + reg = <0x30000 0x10000>; + interrupts = <11 0x8>; + interrupt-parent = <&ipic>; + fsl,num-channels = <4>; + fsl,channel-fifo-len = <24>; + fsl,exec-units-mask = <0x7e>; + fsl,descriptor-types-mask = <0x01010ebf>; + }; + + ipic: pic@700 { + interrupt-controller; + #address-cells = <0>; + #interrupt-cells = <2>; + reg = <0x700 0x100>; + device_type = "ipic"; + }; + }; + + pci0: pci@e0008600 { + interrupt-map-mask = <0xf800 0x0 0x0 0x7>; + interrupt-map = < + /* IDSEL 0x0F - PCI Slot */ + 0x7800 0x0 0x0 0x1 &ipic 20 0x8 /* PCI_INTA */ + 0x7800 0x0 0x0 0x2 &ipic 21 0x8 /* PCI_INTB */ + >; + interrupt-parent = <&ipic>; + interrupts = <67 0x8>; + bus-range = <0x1 0x1>; + ranges = <0x42000000 0x0 0xa0000000 0xa0000000 0x0 0x10000000 + 0x02000000 0x0 0xb0000000 0xb0000000 0x0 0x10000000 + 0x01000000 0x0 0x00000000 0xe3000000 0x0 0x01000000>; + clock-frequency = <66666666>; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + reg = <0xe0008600 0x100 /* internal registers */ + 0xe0008380 0x8>; /* config space access registers */ + compatible = "fsl,mpc8349-pci"; + device_type = "pci"; + }; +}; diff --git a/arch/powerpc/boot/dts/mpc834x_mds.dts b/arch/powerpc/boot/dts/mpc834x_mds.dts new file mode 100644 index 000000000..4843c3ff7 --- /dev/null +++ b/arch/powerpc/boot/dts/mpc834x_mds.dts @@ -0,0 +1,407 @@ +/* + * MPC8349E MDS Device Tree Source + * + * Copyright 2005, 2006 Freescale Semiconductor Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +/dts-v1/; + +/ { + model = "MPC8349EMDS"; + compatible = "MPC8349EMDS", "MPC834xMDS", "MPC83xxMDS"; + #address-cells = <1>; + #size-cells = <1>; + + aliases { + ethernet0 = &enet0; + ethernet1 = &enet1; + serial0 = &serial0; + serial1 = &serial1; + pci0 = &pci0; + pci1 = &pci1; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + PowerPC,8349@0 { + device_type = "cpu"; + reg = <0x0>; + d-cache-line-size = <32>; + i-cache-line-size = <32>; + d-cache-size = <32768>; + i-cache-size = <32768>; + timebase-frequency = <0>; // from bootloader + bus-frequency = <0>; // from bootloader + clock-frequency = <0>; // from bootloader + }; + }; + + memory { + device_type = "memory"; + reg = <0x00000000 0x10000000>; // 256MB at 0 + }; + + bcsr@e2400000 { + compatible = "fsl,mpc8349mds-bcsr"; + reg = <0xe2400000 0x8000>; + }; + + soc8349@e0000000 { + #address-cells = <1>; + #size-cells = <1>; + device_type = "soc"; + compatible = "simple-bus"; + ranges = <0x0 0xe0000000 0x00100000>; + reg = <0xe0000000 0x00000200>; + bus-frequency = <0>; + + wdt@200 { + device_type = "watchdog"; + compatible = "mpc83xx_wdt"; + reg = <0x200 0x100>; + }; + + i2c@3000 { + #address-cells = <1>; + #size-cells = <0>; + cell-index = <0>; + compatible = "fsl-i2c"; + reg = <0x3000 0x100>; + interrupts = <14 0x8>; + interrupt-parent = <&ipic>; + dfsrr; + + rtc@68 { + compatible = "dallas,ds1374"; + reg = <0x68>; + }; + }; + + i2c@3100 { + #address-cells = <1>; + #size-cells = <0>; + cell-index = <1>; + compatible = "fsl-i2c"; + reg = <0x3100 0x100>; + interrupts = <15 0x8>; + interrupt-parent = <&ipic>; + dfsrr; + }; + + spi@7000 { + cell-index = <0>; + compatible = "fsl,spi"; + reg = <0x7000 0x1000>; + interrupts = <16 0x8>; + interrupt-parent = <&ipic>; + mode = "cpu"; + }; + + dma@82a8 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,mpc8349-dma", "fsl,elo-dma"; + reg = <0x82a8 4>; + ranges = <0 0x8100 0x1a8>; + interrupt-parent = <&ipic>; + interrupts = <71 8>; + cell-index = <0>; + dma-channel@0 { + compatible = "fsl,mpc8349-dma-channel", "fsl,elo-dma-channel"; + reg = <0 0x80>; + cell-index = <0>; + interrupt-parent = <&ipic>; + interrupts = <71 8>; + }; + dma-channel@80 { + compatible = "fsl,mpc8349-dma-channel", "fsl,elo-dma-channel"; + reg = <0x80 0x80>; + cell-index = <1>; + interrupt-parent = <&ipic>; + interrupts = <71 8>; + }; + dma-channel@100 { + compatible = "fsl,mpc8349-dma-channel", "fsl,elo-dma-channel"; + reg = <0x100 0x80>; + cell-index = <2>; + interrupt-parent = <&ipic>; + interrupts = <71 8>; + }; + dma-channel@180 { + compatible = "fsl,mpc8349-dma-channel", "fsl,elo-dma-channel"; + reg = <0x180 0x28>; + cell-index = <3>; + interrupt-parent = <&ipic>; + interrupts = <71 8>; + }; + }; + + /* phy type (ULPI or SERIAL) are only types supported for MPH */ + /* port = 0 or 1 */ + usb@22000 { + compatible = "fsl-usb2-mph"; + reg = <0x22000 0x1000>; + #address-cells = <1>; + #size-cells = <0>; + interrupt-parent = <&ipic>; + interrupts = <39 0x8>; + phy_type = "ulpi"; + port0; + }; + /* phy type (ULPI, UTMI, UTMI_WIDE, SERIAL) */ + usb@23000 { + compatible = "fsl-usb2-dr"; + reg = <0x23000 0x1000>; + #address-cells = <1>; + #size-cells = <0>; + interrupt-parent = <&ipic>; + interrupts = <38 0x8>; + dr_mode = "otg"; + phy_type = "ulpi"; + }; + + enet0: ethernet@24000 { + #address-cells = <1>; + #size-cells = <1>; + cell-index = <0>; + device_type = "network"; + model = "TSEC"; + compatible = "gianfar"; + reg = <0x24000 0x1000>; + ranges = <0x0 0x24000 0x1000>; + local-mac-address = [ 00 00 00 00 00 00 ]; + interrupts = <32 0x8 33 0x8 34 0x8>; + interrupt-parent = <&ipic>; + tbi-handle = <&tbi0>; + phy-handle = <&phy0>; + linux,network-index = <0>; + + mdio@520 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,gianfar-mdio"; + reg = <0x520 0x20>; + + phy0: ethernet-phy@0 { + interrupt-parent = <&ipic>; + interrupts = <17 0x8>; + reg = <0x0>; + }; + + phy1: ethernet-phy@1 { + interrupt-parent = <&ipic>; + interrupts = <18 0x8>; + reg = <0x1>; + }; + + tbi0: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + }; + + enet1: ethernet@25000 { + #address-cells = <1>; + #size-cells = <1>; + cell-index = <1>; + device_type = "network"; + model = "TSEC"; + compatible = "gianfar"; + reg = <0x25000 0x1000>; + ranges = <0x0 0x25000 0x1000>; + local-mac-address = [ 00 00 00 00 00 00 ]; + interrupts = <35 0x8 36 0x8 37 0x8>; + interrupt-parent = <&ipic>; + tbi-handle = <&tbi1>; + phy-handle = <&phy1>; + linux,network-index = <1>; + + mdio@520 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,gianfar-tbi"; + reg = <0x520 0x20>; + + tbi1: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + }; + + serial0: serial@4500 { + cell-index = <0>; + device_type = "serial"; + compatible = "fsl,ns16550", "ns16550"; + reg = <0x4500 0x100>; + clock-frequency = <0>; + interrupts = <9 0x8>; + interrupt-parent = <&ipic>; + }; + + serial1: serial@4600 { + cell-index = <1>; + device_type = "serial"; + compatible = "fsl,ns16550", "ns16550"; + reg = <0x4600 0x100>; + clock-frequency = <0>; + interrupts = <10 0x8>; + interrupt-parent = <&ipic>; + }; + + crypto@30000 { + compatible = "fsl,sec2.0"; + reg = <0x30000 0x10000>; + interrupts = <11 0x8>; + interrupt-parent = <&ipic>; + fsl,num-channels = <4>; + fsl,channel-fifo-len = <24>; + fsl,exec-units-mask = <0x7e>; + fsl,descriptor-types-mask = <0x01010ebf>; + }; + + /* IPIC + * interrupts cell = <intr #, sense> + * sense values match linux IORESOURCE_IRQ_* defines: + * sense == 8: Level, low assertion + * sense == 2: Edge, high-to-low change + */ + ipic: pic@700 { + interrupt-controller; + #address-cells = <0>; + #interrupt-cells = <2>; + reg = <0x700 0x100>; + device_type = "ipic"; + }; + }; + + pci0: pci@e0008500 { + interrupt-map-mask = <0xf800 0x0 0x0 0x7>; + interrupt-map = < + + /* IDSEL 0x11 */ + 0x8800 0x0 0x0 0x1 &ipic 20 0x8 + 0x8800 0x0 0x0 0x2 &ipic 21 0x8 + 0x8800 0x0 0x0 0x3 &ipic 22 0x8 + 0x8800 0x0 0x0 0x4 &ipic 23 0x8 + + /* IDSEL 0x12 */ + 0x9000 0x0 0x0 0x1 &ipic 22 0x8 + 0x9000 0x0 0x0 0x2 &ipic 23 0x8 + 0x9000 0x0 0x0 0x3 &ipic 20 0x8 + 0x9000 0x0 0x0 0x4 &ipic 21 0x8 + + /* IDSEL 0x13 */ + 0x9800 0x0 0x0 0x1 &ipic 23 0x8 + 0x9800 0x0 0x0 0x2 &ipic 20 0x8 + 0x9800 0x0 0x0 0x3 &ipic 21 0x8 + 0x9800 0x0 0x0 0x4 &ipic 22 0x8 + + /* IDSEL 0x15 */ + 0xa800 0x0 0x0 0x1 &ipic 20 0x8 + 0xa800 0x0 0x0 0x2 &ipic 21 0x8 + 0xa800 0x0 0x0 0x3 &ipic 22 0x8 + 0xa800 0x0 0x0 0x4 &ipic 23 0x8 + + /* IDSEL 0x16 */ + 0xb000 0x0 0x0 0x1 &ipic 23 0x8 + 0xb000 0x0 0x0 0x2 &ipic 20 0x8 + 0xb000 0x0 0x0 0x3 &ipic 21 0x8 + 0xb000 0x0 0x0 0x4 &ipic 22 0x8 + + /* IDSEL 0x17 */ + 0xb800 0x0 0x0 0x1 &ipic 22 0x8 + 0xb800 0x0 0x0 0x2 &ipic 23 0x8 + 0xb800 0x0 0x0 0x3 &ipic 20 0x8 + 0xb800 0x0 0x0 0x4 &ipic 21 0x8 + + /* IDSEL 0x18 */ + 0xc000 0x0 0x0 0x1 &ipic 21 0x8 + 0xc000 0x0 0x0 0x2 &ipic 22 0x8 + 0xc000 0x0 0x0 0x3 &ipic 23 0x8 + 0xc000 0x0 0x0 0x4 &ipic 20 0x8>; + interrupt-parent = <&ipic>; + interrupts = <66 0x8>; + bus-range = <0 0>; + ranges = <0x02000000 0x0 0x90000000 0x90000000 0x0 0x10000000 + 0x42000000 0x0 0x80000000 0x80000000 0x0 0x10000000 + 0x01000000 0x0 0x00000000 0xe2000000 0x0 0x00100000>; + clock-frequency = <66666666>; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + reg = <0xe0008500 0x100 /* internal registers */ + 0xe0008300 0x8>; /* config space access registers */ + compatible = "fsl,mpc8349-pci"; + device_type = "pci"; + }; + + pci1: pci@e0008600 { + interrupt-map-mask = <0xf800 0x0 0x0 0x7>; + interrupt-map = < + + /* IDSEL 0x11 */ + 0x8800 0x0 0x0 0x1 &ipic 20 0x8 + 0x8800 0x0 0x0 0x2 &ipic 21 0x8 + 0x8800 0x0 0x0 0x3 &ipic 22 0x8 + 0x8800 0x0 0x0 0x4 &ipic 23 0x8 + + /* IDSEL 0x12 */ + 0x9000 0x0 0x0 0x1 &ipic 22 0x8 + 0x9000 0x0 0x0 0x2 &ipic 23 0x8 + 0x9000 0x0 0x0 0x3 &ipic 20 0x8 + 0x9000 0x0 0x0 0x4 &ipic 21 0x8 + + /* IDSEL 0x13 */ + 0x9800 0x0 0x0 0x1 &ipic 23 0x8 + 0x9800 0x0 0x0 0x2 &ipic 20 0x8 + 0x9800 0x0 0x0 0x3 &ipic 21 0x8 + 0x9800 0x0 0x0 0x4 &ipic 22 0x8 + + /* IDSEL 0x15 */ + 0xa800 0x0 0x0 0x1 &ipic 20 0x8 + 0xa800 0x0 0x0 0x2 &ipic 21 0x8 + 0xa800 0x0 0x0 0x3 &ipic 22 0x8 + 0xa800 0x0 0x0 0x4 &ipic 23 0x8 + + /* IDSEL 0x16 */ + 0xb000 0x0 0x0 0x1 &ipic 23 0x8 + 0xb000 0x0 0x0 0x2 &ipic 20 0x8 + 0xb000 0x0 0x0 0x3 &ipic 21 0x8 + 0xb000 0x0 0x0 0x4 &ipic 22 0x8 + + /* IDSEL 0x17 */ + 0xb800 0x0 0x0 0x1 &ipic 22 0x8 + 0xb800 0x0 0x0 0x2 &ipic 23 0x8 + 0xb800 0x0 0x0 0x3 &ipic 20 0x8 + 0xb800 0x0 0x0 0x4 &ipic 21 0x8 + + /* IDSEL 0x18 */ + 0xc000 0x0 0x0 0x1 &ipic 21 0x8 + 0xc000 0x0 0x0 0x2 &ipic 22 0x8 + 0xc000 0x0 0x0 0x3 &ipic 23 0x8 + 0xc000 0x0 0x0 0x4 &ipic 20 0x8>; + interrupt-parent = <&ipic>; + interrupts = <67 0x8>; + bus-range = <0 0>; + ranges = <0x02000000 0x0 0xb0000000 0xb0000000 0x0 0x10000000 + 0x42000000 0x0 0xa0000000 0xa0000000 0x0 0x10000000 + 0x01000000 0x0 0x00000000 0xe2100000 0x0 0x00100000>; + clock-frequency = <66666666>; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + reg = <0xe0008600 0x100 /* internal registers */ + 0xe0008380 0x8>; /* config space access registers */ + compatible = "fsl,mpc8349-pci"; + device_type = "pci"; + }; +}; diff --git a/arch/powerpc/boot/dts/mpc836x_mds.dts b/arch/powerpc/boot/dts/mpc836x_mds.dts new file mode 100644 index 000000000..ecb6ccd3a --- /dev/null +++ b/arch/powerpc/boot/dts/mpc836x_mds.dts @@ -0,0 +1,485 @@ +/* + * MPC8360E EMDS Device Tree Source + * + * Copyright 2006 Freescale Semiconductor Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + + +/* +/memreserve/ 00000000 1000000; +*/ + +/dts-v1/; + +/ { + model = "MPC8360MDS"; + compatible = "MPC8360EMDS", "MPC836xMDS", "MPC83xxMDS"; + #address-cells = <1>; + #size-cells = <1>; + + aliases { + ethernet0 = &enet0; + ethernet1 = &enet1; + serial0 = &serial0; + serial1 = &serial1; + pci0 = &pci0; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + PowerPC,8360@0 { + device_type = "cpu"; + reg = <0x0>; + d-cache-line-size = <32>; // 32 bytes + i-cache-line-size = <32>; // 32 bytes + d-cache-size = <32768>; // L1, 32K + i-cache-size = <32768>; // L1, 32K + timebase-frequency = <66000000>; + bus-frequency = <264000000>; + clock-frequency = <528000000>; + }; + }; + + memory { + device_type = "memory"; + reg = <0x00000000 0x10000000>; + }; + + localbus@e0005000 { + #address-cells = <2>; + #size-cells = <1>; + compatible = "fsl,mpc8360-localbus", "fsl,pq2pro-localbus", + "simple-bus"; + reg = <0xe0005000 0xd8>; + ranges = <0 0 0xfe000000 0x02000000 + 1 0 0xf8000000 0x00008000>; + + flash@0,0 { + compatible = "cfi-flash"; + reg = <0 0 0x2000000>; + bank-width = <2>; + device-width = <1>; + }; + + bcsr@1,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,mpc8360mds-bcsr"; + reg = <1 0 0x8000>; + ranges = <0 1 0 0x8000>; + + bcsr13: gpio-controller@d { + #gpio-cells = <2>; + compatible = "fsl,mpc8360mds-bcsr-gpio"; + reg = <0xd 1>; + gpio-controller; + }; + }; + }; + + soc8360@e0000000 { + #address-cells = <1>; + #size-cells = <1>; + device_type = "soc"; + compatible = "simple-bus"; + ranges = <0x0 0xe0000000 0x00100000>; + reg = <0xe0000000 0x00000200>; + bus-frequency = <264000000>; + + wdt@200 { + device_type = "watchdog"; + compatible = "mpc83xx_wdt"; + reg = <0x200 0x100>; + }; + + pmc: power@b00 { + compatible = "fsl,mpc8360-pmc", "fsl,mpc8349-pmc"; + reg = <0xb00 0x100 0xa00 0x100>; + interrupts = <80 0x8>; + interrupt-parent = <&ipic>; + }; + + i2c@3000 { + #address-cells = <1>; + #size-cells = <0>; + cell-index = <0>; + compatible = "fsl-i2c"; + reg = <0x3000 0x100>; + interrupts = <14 0x8>; + interrupt-parent = <&ipic>; + dfsrr; + + rtc@68 { + compatible = "dallas,ds1374"; + reg = <0x68>; + }; + }; + + i2c@3100 { + #address-cells = <1>; + #size-cells = <0>; + cell-index = <1>; + compatible = "fsl-i2c"; + reg = <0x3100 0x100>; + interrupts = <15 0x8>; + interrupt-parent = <&ipic>; + dfsrr; + }; + + serial0: serial@4500 { + cell-index = <0>; + device_type = "serial"; + compatible = "fsl,ns16550", "ns16550"; + reg = <0x4500 0x100>; + clock-frequency = <264000000>; + interrupts = <9 0x8>; + interrupt-parent = <&ipic>; + }; + + serial1: serial@4600 { + cell-index = <1>; + device_type = "serial"; + compatible = "fsl,ns16550", "ns16550"; + reg = <0x4600 0x100>; + clock-frequency = <264000000>; + interrupts = <10 0x8>; + interrupt-parent = <&ipic>; + }; + + dma@82a8 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,mpc8360-dma", "fsl,elo-dma"; + reg = <0x82a8 4>; + ranges = <0 0x8100 0x1a8>; + interrupt-parent = <&ipic>; + interrupts = <71 8>; + cell-index = <0>; + dma-channel@0 { + compatible = "fsl,mpc8360-dma-channel", "fsl,elo-dma-channel"; + reg = <0 0x80>; + cell-index = <0>; + interrupt-parent = <&ipic>; + interrupts = <71 8>; + }; + dma-channel@80 { + compatible = "fsl,mpc8360-dma-channel", "fsl,elo-dma-channel"; + reg = <0x80 0x80>; + cell-index = <1>; + interrupt-parent = <&ipic>; + interrupts = <71 8>; + }; + dma-channel@100 { + compatible = "fsl,mpc8360-dma-channel", "fsl,elo-dma-channel"; + reg = <0x100 0x80>; + cell-index = <2>; + interrupt-parent = <&ipic>; + interrupts = <71 8>; + }; + dma-channel@180 { + compatible = "fsl,mpc8360-dma-channel", "fsl,elo-dma-channel"; + reg = <0x180 0x28>; + cell-index = <3>; + interrupt-parent = <&ipic>; + interrupts = <71 8>; + }; + }; + + crypto@30000 { + compatible = "fsl,sec2.0"; + reg = <0x30000 0x10000>; + interrupts = <11 0x8>; + interrupt-parent = <&ipic>; + fsl,num-channels = <4>; + fsl,channel-fifo-len = <24>; + fsl,exec-units-mask = <0x7e>; + fsl,descriptor-types-mask = <0x01010ebf>; + sleep = <&pmc 0x03000000>; + }; + + ipic: pic@700 { + interrupt-controller; + #address-cells = <0>; + #interrupt-cells = <2>; + reg = <0x700 0x100>; + device_type = "ipic"; + }; + + par_io@1400 { + #address-cells = <1>; + #size-cells = <1>; + reg = <0x1400 0x100>; + ranges = <0 0x1400 0x100>; + device_type = "par_io"; + num-ports = <7>; + + qe_pio_b: gpio-controller@18 { + #gpio-cells = <2>; + compatible = "fsl,mpc8360-qe-pario-bank", + "fsl,mpc8323-qe-pario-bank"; + reg = <0x18 0x18>; + gpio-controller; + }; + + pio1: ucc_pin@01 { + pio-map = < + /* port pin dir open_drain assignment has_irq */ + 0 3 1 0 1 0 /* TxD0 */ + 0 4 1 0 1 0 /* TxD1 */ + 0 5 1 0 1 0 /* TxD2 */ + 0 6 1 0 1 0 /* TxD3 */ + 1 6 1 0 3 0 /* TxD4 */ + 1 7 1 0 1 0 /* TxD5 */ + 1 9 1 0 2 0 /* TxD6 */ + 1 10 1 0 2 0 /* TxD7 */ + 0 9 2 0 1 0 /* RxD0 */ + 0 10 2 0 1 0 /* RxD1 */ + 0 11 2 0 1 0 /* RxD2 */ + 0 12 2 0 1 0 /* RxD3 */ + 0 13 2 0 1 0 /* RxD4 */ + 1 1 2 0 2 0 /* RxD5 */ + 1 0 2 0 2 0 /* RxD6 */ + 1 4 2 0 2 0 /* RxD7 */ + 0 7 1 0 1 0 /* TX_EN */ + 0 8 1 0 1 0 /* TX_ER */ + 0 15 2 0 1 0 /* RX_DV */ + 0 16 2 0 1 0 /* RX_ER */ + 0 0 2 0 1 0 /* RX_CLK */ + 2 9 1 0 3 0 /* GTX_CLK - CLK10 */ + 2 8 2 0 1 0>; /* GTX125 - CLK9 */ + }; + pio2: ucc_pin@02 { + pio-map = < + /* port pin dir open_drain assignment has_irq */ + 0 17 1 0 1 0 /* TxD0 */ + 0 18 1 0 1 0 /* TxD1 */ + 0 19 1 0 1 0 /* TxD2 */ + 0 20 1 0 1 0 /* TxD3 */ + 1 2 1 0 1 0 /* TxD4 */ + 1 3 1 0 2 0 /* TxD5 */ + 1 5 1 0 3 0 /* TxD6 */ + 1 8 1 0 3 0 /* TxD7 */ + 0 23 2 0 1 0 /* RxD0 */ + 0 24 2 0 1 0 /* RxD1 */ + 0 25 2 0 1 0 /* RxD2 */ + 0 26 2 0 1 0 /* RxD3 */ + 0 27 2 0 1 0 /* RxD4 */ + 1 12 2 0 2 0 /* RxD5 */ + 1 13 2 0 3 0 /* RxD6 */ + 1 11 2 0 2 0 /* RxD7 */ + 0 21 1 0 1 0 /* TX_EN */ + 0 22 1 0 1 0 /* TX_ER */ + 0 29 2 0 1 0 /* RX_DV */ + 0 30 2 0 1 0 /* RX_ER */ + 0 31 2 0 1 0 /* RX_CLK */ + 2 2 1 0 2 0 /* GTX_CLK - CLK10 */ + 2 3 2 0 1 0 /* GTX125 - CLK4 */ + 0 1 3 0 2 0 /* MDIO */ + 0 2 1 0 1 0>; /* MDC */ + }; + + }; + }; + + qe@e0100000 { + #address-cells = <1>; + #size-cells = <1>; + device_type = "qe"; + compatible = "fsl,qe"; + ranges = <0x0 0xe0100000 0x00100000>; + reg = <0xe0100000 0x480>; + brg-frequency = <0>; + bus-frequency = <396000000>; + fsl,qe-num-riscs = <2>; + fsl,qe-num-snums = <28>; + + muram@10000 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,qe-muram", "fsl,cpm-muram"; + ranges = <0x0 0x00010000 0x0000c000>; + + data-only@0 { + compatible = "fsl,qe-muram-data", + "fsl,cpm-muram-data"; + reg = <0x0 0xc000>; + }; + }; + + timer@440 { + compatible = "fsl,mpc8360-qe-gtm", + "fsl,qe-gtm", "fsl,gtm"; + reg = <0x440 0x40>; + clock-frequency = <132000000>; + interrupts = <12 13 14 15>; + interrupt-parent = <&qeic>; + }; + + spi@4c0 { + cell-index = <0>; + compatible = "fsl,spi"; + reg = <0x4c0 0x40>; + interrupts = <2>; + interrupt-parent = <&qeic>; + mode = "cpu"; + }; + + spi@500 { + cell-index = <1>; + compatible = "fsl,spi"; + reg = <0x500 0x40>; + interrupts = <1>; + interrupt-parent = <&qeic>; + mode = "cpu"; + }; + + usb@6c0 { + compatible = "fsl,mpc8360-qe-usb", + "fsl,mpc8323-qe-usb"; + reg = <0x6c0 0x40 0x8b00 0x100>; + interrupts = <11>; + interrupt-parent = <&qeic>; + fsl,fullspeed-clock = "clk21"; + fsl,lowspeed-clock = "brg9"; + gpios = <&qe_pio_b 2 0 /* USBOE */ + &qe_pio_b 3 0 /* USBTP */ + &qe_pio_b 8 0 /* USBTN */ + &qe_pio_b 9 0 /* USBRP */ + &qe_pio_b 11 0 /* USBRN */ + &bcsr13 5 0 /* SPEED */ + &bcsr13 4 1>; /* POWER */ + }; + + enet0: ucc@2000 { + device_type = "network"; + compatible = "ucc_geth"; + cell-index = <1>; + reg = <0x2000 0x200>; + interrupts = <32>; + interrupt-parent = <&qeic>; + local-mac-address = [ 00 00 00 00 00 00 ]; + rx-clock-name = "none"; + tx-clock-name = "clk9"; + phy-handle = <&phy0>; + phy-connection-type = "rgmii-id"; + pio-handle = <&pio1>; + }; + + enet1: ucc@3000 { + device_type = "network"; + compatible = "ucc_geth"; + cell-index = <2>; + reg = <0x3000 0x200>; + interrupts = <33>; + interrupt-parent = <&qeic>; + local-mac-address = [ 00 00 00 00 00 00 ]; + rx-clock-name = "none"; + tx-clock-name = "clk4"; + phy-handle = <&phy1>; + phy-connection-type = "rgmii-id"; + pio-handle = <&pio2>; + }; + + mdio@2120 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x2120 0x18>; + compatible = "fsl,ucc-mdio"; + + phy0: ethernet-phy@00 { + interrupt-parent = <&ipic>; + interrupts = <17 0x8>; + reg = <0x0>; + }; + phy1: ethernet-phy@01 { + interrupt-parent = <&ipic>; + interrupts = <18 0x8>; + reg = <0x1>; + }; + tbi-phy@2 { + device_type = "tbi-phy"; + reg = <0x2>; + }; + }; + + qeic: interrupt-controller@80 { + interrupt-controller; + compatible = "fsl,qe-ic"; + #address-cells = <0>; + #interrupt-cells = <1>; + reg = <0x80 0x80>; + big-endian; + interrupts = <32 0x8 33 0x8>; // high:32 low:33 + interrupt-parent = <&ipic>; + }; + }; + + pci0: pci@e0008500 { + interrupt-map-mask = <0xf800 0x0 0x0 0x7>; + interrupt-map = < + + /* IDSEL 0x11 AD17 */ + 0x8800 0x0 0x0 0x1 &ipic 20 0x8 + 0x8800 0x0 0x0 0x2 &ipic 21 0x8 + 0x8800 0x0 0x0 0x3 &ipic 22 0x8 + 0x8800 0x0 0x0 0x4 &ipic 23 0x8 + + /* IDSEL 0x12 AD18 */ + 0x9000 0x0 0x0 0x1 &ipic 22 0x8 + 0x9000 0x0 0x0 0x2 &ipic 23 0x8 + 0x9000 0x0 0x0 0x3 &ipic 20 0x8 + 0x9000 0x0 0x0 0x4 &ipic 21 0x8 + + /* IDSEL 0x13 AD19 */ + 0x9800 0x0 0x0 0x1 &ipic 23 0x8 + 0x9800 0x0 0x0 0x2 &ipic 20 0x8 + 0x9800 0x0 0x0 0x3 &ipic 21 0x8 + 0x9800 0x0 0x0 0x4 &ipic 22 0x8 + + /* IDSEL 0x15 AD21*/ + 0xa800 0x0 0x0 0x1 &ipic 20 0x8 + 0xa800 0x0 0x0 0x2 &ipic 21 0x8 + 0xa800 0x0 0x0 0x3 &ipic 22 0x8 + 0xa800 0x0 0x0 0x4 &ipic 23 0x8 + + /* IDSEL 0x16 AD22*/ + 0xb000 0x0 0x0 0x1 &ipic 23 0x8 + 0xb000 0x0 0x0 0x2 &ipic 20 0x8 + 0xb000 0x0 0x0 0x3 &ipic 21 0x8 + 0xb000 0x0 0x0 0x4 &ipic 22 0x8 + + /* IDSEL 0x17 AD23*/ + 0xb800 0x0 0x0 0x1 &ipic 22 0x8 + 0xb800 0x0 0x0 0x2 &ipic 23 0x8 + 0xb800 0x0 0x0 0x3 &ipic 20 0x8 + 0xb800 0x0 0x0 0x4 &ipic 21 0x8 + + /* IDSEL 0x18 AD24*/ + 0xc000 0x0 0x0 0x1 &ipic 21 0x8 + 0xc000 0x0 0x0 0x2 &ipic 22 0x8 + 0xc000 0x0 0x0 0x3 &ipic 23 0x8 + 0xc000 0x0 0x0 0x4 &ipic 20 0x8>; + interrupt-parent = <&ipic>; + interrupts = <66 0x8>; + bus-range = <0 0>; + ranges = <0x02000000 0x0 0xa0000000 0xa0000000 0x0 0x10000000 + 0x42000000 0x0 0x80000000 0x80000000 0x0 0x10000000 + 0x01000000 0x0 0x00000000 0xe2000000 0x0 0x00100000>; + clock-frequency = <66666666>; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + reg = <0xe0008500 0x100 /* internal registers */ + 0xe0008300 0x8>; /* config space access registers */ + compatible = "fsl,mpc8349-pci"; + device_type = "pci"; + sleep = <&pmc 0x00010000>; + }; +}; diff --git a/arch/powerpc/boot/dts/mpc836x_rdk.dts b/arch/powerpc/boot/dts/mpc836x_rdk.dts new file mode 100644 index 000000000..daeacbdcf --- /dev/null +++ b/arch/powerpc/boot/dts/mpc836x_rdk.dts @@ -0,0 +1,467 @@ +/* + * MPC8360E RDK Device Tree Source + * + * Copyright 2006 Freescale Semiconductor Inc. + * Copyright 2007-2008 MontaVista Software, Inc. + * + * Author: Anton Vorontsov <avorontsov@ru.mvista.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +/dts-v1/; + +/ { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,mpc8360rdk"; + + aliases { + serial0 = &serial0; + serial1 = &serial1; + serial2 = &serial2; + serial3 = &serial3; + ethernet0 = &enet0; + ethernet1 = &enet1; + ethernet2 = &enet2; + ethernet3 = &enet3; + pci0 = &pci0; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + PowerPC,8360@0 { + device_type = "cpu"; + reg = <0>; + d-cache-line-size = <32>; + i-cache-line-size = <32>; + d-cache-size = <32768>; + i-cache-size = <32768>; + /* filled by u-boot */ + timebase-frequency = <0>; + bus-frequency = <0>; + clock-frequency = <0>; + }; + }; + + memory { + device_type = "memory"; + /* filled by u-boot */ + reg = <0 0>; + }; + + soc@e0000000 { + #address-cells = <1>; + #size-cells = <1>; + device_type = "soc"; + compatible = "fsl,mpc8360-immr", "fsl,immr", "fsl,soc", + "simple-bus"; + ranges = <0 0xe0000000 0x200000>; + reg = <0xe0000000 0x200>; + /* filled by u-boot */ + bus-frequency = <0>; + + wdt@200 { + compatible = "mpc83xx_wdt"; + reg = <0x200 0x100>; + }; + + pmc: power@b00 { + compatible = "fsl,mpc8360-pmc", "fsl,mpc8349-pmc"; + reg = <0xb00 0x100 0xa00 0x100>; + interrupts = <80 0x8>; + interrupt-parent = <&ipic>; + }; + + i2c@3000 { + #address-cells = <1>; + #size-cells = <0>; + cell-index = <0>; + compatible = "fsl-i2c"; + reg = <0x3000 0x100>; + interrupts = <14 8>; + interrupt-parent = <&ipic>; + dfsrr; + }; + + i2c@3100 { + #address-cells = <1>; + #size-cells = <0>; + cell-index = <1>; + compatible = "fsl-i2c"; + reg = <0x3100 0x100>; + interrupts = <16 8>; + interrupt-parent = <&ipic>; + dfsrr; + }; + + serial0: serial@4500 { + device_type = "serial"; + compatible = "fsl,ns16550", "ns16550"; + reg = <0x4500 0x100>; + interrupts = <9 8>; + interrupt-parent = <&ipic>; + /* filled by u-boot */ + clock-frequency = <0>; + }; + + serial1: serial@4600 { + device_type = "serial"; + compatible = "fsl,ns16550", "ns16550"; + reg = <0x4600 0x100>; + interrupts = <10 8>; + interrupt-parent = <&ipic>; + /* filled by u-boot */ + clock-frequency = <0>; + }; + + dma@82a8 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,mpc8360-dma", "fsl,elo-dma"; + reg = <0x82a8 4>; + ranges = <0 0x8100 0x1a8>; + interrupt-parent = <&ipic>; + interrupts = <71 8>; + cell-index = <0>; + dma-channel@0 { + compatible = "fsl,mpc8360-dma-channel", "fsl,elo-dma-channel"; + reg = <0 0x80>; + cell-index = <0>; + interrupt-parent = <&ipic>; + interrupts = <71 8>; + }; + dma-channel@80 { + compatible = "fsl,mpc8360-dma-channel", "fsl,elo-dma-channel"; + reg = <0x80 0x80>; + cell-index = <1>; + interrupt-parent = <&ipic>; + interrupts = <71 8>; + }; + dma-channel@100 { + compatible = "fsl,mpc8360-dma-channel", "fsl,elo-dma-channel"; + reg = <0x100 0x80>; + cell-index = <2>; + interrupt-parent = <&ipic>; + interrupts = <71 8>; + }; + dma-channel@180 { + compatible = "fsl,mpc8360-dma-channel", "fsl,elo-dma-channel"; + reg = <0x180 0x28>; + cell-index = <3>; + interrupt-parent = <&ipic>; + interrupts = <71 8>; + }; + }; + + crypto@30000 { + compatible = "fsl,sec2.0"; + reg = <0x30000 0x10000>; + interrupts = <11 0x8>; + interrupt-parent = <&ipic>; + fsl,num-channels = <4>; + fsl,channel-fifo-len = <24>; + fsl,exec-units-mask = <0x7e>; + fsl,descriptor-types-mask = <0x01010ebf>; + sleep = <&pmc 0x03000000>; + }; + + ipic: interrupt-controller@700 { + #address-cells = <0>; + #interrupt-cells = <2>; + compatible = "fsl,pq2pro-pic", "fsl,ipic"; + interrupt-controller; + reg = <0x700 0x100>; + }; + + qe_pio_b: gpio-controller@1418 { + #gpio-cells = <2>; + compatible = "fsl,mpc8360-qe-pario-bank", + "fsl,mpc8323-qe-pario-bank"; + reg = <0x1418 0x18>; + gpio-controller; + }; + + qe_pio_e: gpio-controller@1460 { + #gpio-cells = <2>; + compatible = "fsl,mpc8360-qe-pario-bank", + "fsl,mpc8323-qe-pario-bank"; + reg = <0x1460 0x18>; + gpio-controller; + }; + + qe@100000 { + #address-cells = <1>; + #size-cells = <1>; + device_type = "qe"; + compatible = "fsl,qe", "simple-bus"; + ranges = <0 0x100000 0x100000>; + reg = <0x100000 0x480>; + /* filled by u-boot */ + clock-frequency = <0>; + bus-frequency = <0>; + brg-frequency = <0>; + fsl,qe-num-riscs = <2>; + fsl,qe-num-snums = <28>; + + muram@10000 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,qe-muram", "fsl,cpm-muram"; + ranges = <0 0x10000 0xc000>; + + data-only@0 { + compatible = "fsl,qe-muram-data", + "fsl,cpm-muram-data"; + reg = <0 0xc000>; + }; + }; + + timer@440 { + compatible = "fsl,mpc8360-qe-gtm", + "fsl,qe-gtm", "fsl,gtm"; + reg = <0x440 0x40>; + interrupts = <12 13 14 15>; + interrupt-parent = <&qeic>; + clock-frequency = <166666666>; + }; + + usb@6c0 { + compatible = "fsl,mpc8360-qe-usb", + "fsl,mpc8323-qe-usb"; + reg = <0x6c0 0x40 0x8b00 0x100>; + interrupts = <11>; + interrupt-parent = <&qeic>; + fsl,fullspeed-clock = "clk21"; + gpios = <&qe_pio_b 2 0 /* USBOE */ + &qe_pio_b 3 0 /* USBTP */ + &qe_pio_b 8 0 /* USBTN */ + &qe_pio_b 9 0 /* USBRP */ + &qe_pio_b 11 0 /* USBRN */ + &qe_pio_e 20 0 /* SPEED */ + &qe_pio_e 21 1 /* POWER */>; + }; + + spi@4c0 { + cell-index = <0>; + compatible = "fsl,spi"; + reg = <0x4c0 0x40>; + interrupts = <2>; + interrupt-parent = <&qeic>; + mode = "cpu-qe"; + }; + + spi@500 { + cell-index = <1>; + compatible = "fsl,spi"; + reg = <0x500 0x40>; + interrupts = <1>; + interrupt-parent = <&qeic>; + mode = "cpu-qe"; + }; + + enet0: ucc@2000 { + device_type = "network"; + compatible = "ucc_geth"; + cell-index = <1>; + reg = <0x2000 0x200>; + interrupts = <32>; + interrupt-parent = <&qeic>; + rx-clock-name = "none"; + tx-clock-name = "clk9"; + phy-handle = <&phy2>; + phy-connection-type = "rgmii-rxid"; + /* filled by u-boot */ + local-mac-address = [ 00 00 00 00 00 00 ]; + }; + + enet1: ucc@3000 { + device_type = "network"; + compatible = "ucc_geth"; + cell-index = <2>; + reg = <0x3000 0x200>; + interrupts = <33>; + interrupt-parent = <&qeic>; + rx-clock-name = "none"; + tx-clock-name = "clk4"; + phy-handle = <&phy4>; + phy-connection-type = "rgmii-rxid"; + /* filled by u-boot */ + local-mac-address = [ 00 00 00 00 00 00 ]; + }; + + enet2: ucc@2600 { + device_type = "network"; + compatible = "ucc_geth"; + cell-index = <7>; + reg = <0x2600 0x200>; + interrupts = <42>; + interrupt-parent = <&qeic>; + rx-clock-name = "clk20"; + tx-clock-name = "clk19"; + phy-handle = <&phy1>; + phy-connection-type = "mii"; + /* filled by u-boot */ + local-mac-address = [ 00 00 00 00 00 00 ]; + }; + + enet3: ucc@3200 { + device_type = "network"; + compatible = "ucc_geth"; + cell-index = <4>; + reg = <0x3200 0x200>; + interrupts = <35>; + interrupt-parent = <&qeic>; + rx-clock-name = "clk8"; + tx-clock-name = "clk7"; + phy-handle = <&phy3>; + phy-connection-type = "mii"; + /* filled by u-boot */ + local-mac-address = [ 00 00 00 00 00 00 ]; + }; + + mdio@2120 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,ucc-mdio"; + reg = <0x2120 0x18>; + + phy1: ethernet-phy@1 { + compatible = "national,DP83848VV"; + reg = <1>; + }; + + phy2: ethernet-phy@2 { + compatible = "broadcom,BCM5481UA2KMLG"; + reg = <2>; + }; + + phy3: ethernet-phy@3 { + compatible = "national,DP83848VV"; + reg = <3>; + }; + + phy4: ethernet-phy@4 { + compatible = "broadcom,BCM5481UA2KMLG"; + reg = <4>; + }; + }; + + serial2: ucc@2400 { + device_type = "serial"; + compatible = "ucc_uart"; + reg = <0x2400 0x200>; + cell-index = <5>; + port-number = <0>; + rx-clock-name = "brg7"; + tx-clock-name = "brg8"; + interrupts = <40>; + interrupt-parent = <&qeic>; + soft-uart; + }; + + serial3: ucc@3400 { + device_type = "serial"; + compatible = "ucc_uart"; + reg = <0x3400 0x200>; + cell-index = <6>; + port-number = <1>; + rx-clock-name = "brg13"; + tx-clock-name = "brg14"; + interrupts = <41>; + interrupt-parent = <&qeic>; + soft-uart; + }; + + qeic: interrupt-controller@80 { + #address-cells = <0>; + #interrupt-cells = <1>; + compatible = "fsl,qe-ic"; + interrupt-controller; + reg = <0x80 0x80>; + big-endian; + interrupts = <32 8 33 8>; + interrupt-parent = <&ipic>; + }; + }; + }; + + localbus@e0005000 { + #address-cells = <2>; + #size-cells = <1>; + compatible = "fsl,mpc8360-localbus", "fsl,pq2pro-localbus", + "simple-bus"; + reg = <0xe0005000 0xd8>; + ranges = <0 0 0xff800000 0x0800000 + 1 0 0x60000000 0x0001000 + 2 0 0x70000000 0x4000000>; + + flash@0,0 { + compatible = "intel,PC28F640P30T85", "cfi-flash"; + reg = <0 0 0x800000>; + bank-width = <2>; + device-width = <1>; + }; + + upm@1,0 { + compatible = "fsl,upm-nand"; + reg = <1 0 1>; + fsl,upm-addr-offset = <16>; + fsl,upm-cmd-offset = <8>; + gpios = <&qe_pio_e 18 0>; + + flash { + compatible = "stm,nand512-a"; + }; + }; + + display@2,0 { + device_type = "display"; + compatible = "fujitsu,MB86277", "fujitsu,mint"; + reg = <2 0 0x4000000>; + fujitsu,sh3; + little-endian; + /* filled by u-boot */ + address = <0>; + depth = <0>; + width = <0>; + height = <0>; + linebytes = <0>; + /* linux,opened; - added by uboot */ + }; + }; + + pci0: pci@e0008500 { + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + device_type = "pci"; + compatible = "fsl,mpc8360-pci", "fsl,mpc8349-pci"; + reg = <0xe0008500 0x100 /* internal registers */ + 0xe0008300 0x8>; /* config space access registers */ + ranges = <0x02000000 0 0x90000000 0x90000000 0 0x10000000 + 0x42000000 0 0x80000000 0x80000000 0 0x10000000 + 0x01000000 0 0xe0300000 0xe0300000 0 0x00100000>; + interrupts = <66 8>; + interrupt-parent = <&ipic>; + interrupt-map-mask = <0xf800 0 0 7>; + interrupt-map = </* miniPCI0 IDSEL 0x14 AD20 */ + 0xa000 0 0 1 &ipic 18 8 + 0xa000 0 0 2 &ipic 19 8 + + /* PCI1 IDSEL 0x15 AD21 */ + 0xa800 0 0 1 &ipic 19 8 + 0xa800 0 0 2 &ipic 20 8 + 0xa800 0 0 3 &ipic 21 8 + 0xa800 0 0 4 &ipic 18 8>; + sleep = <&pmc 0x00010000>; + /* filled by u-boot */ + bus-range = <0 0>; + clock-frequency = <0>; + }; +}; diff --git a/arch/powerpc/boot/dts/mpc8377_mds.dts b/arch/powerpc/boot/dts/mpc8377_mds.dts new file mode 100644 index 000000000..c2c062e81 --- /dev/null +++ b/arch/powerpc/boot/dts/mpc8377_mds.dts @@ -0,0 +1,509 @@ +/* + * MPC8377E MDS Device Tree Source + * + * Copyright 2007 Freescale Semiconductor Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +/dts-v1/; + +/ { + model = "fsl,mpc8377emds"; + compatible = "fsl,mpc8377emds","fsl,mpc837xmds"; + #address-cells = <1>; + #size-cells = <1>; + + aliases { + ethernet0 = &enet0; + ethernet1 = &enet1; + serial0 = &serial0; + serial1 = &serial1; + pci0 = &pci0; + pci1 = &pci1; + pci2 = &pci2; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + PowerPC,8377@0 { + device_type = "cpu"; + reg = <0x0>; + d-cache-line-size = <32>; + i-cache-line-size = <32>; + d-cache-size = <32768>; + i-cache-size = <32768>; + timebase-frequency = <0>; + bus-frequency = <0>; + clock-frequency = <0>; + }; + }; + + memory { + device_type = "memory"; + reg = <0x00000000 0x20000000>; // 512MB at 0 + }; + + localbus@e0005000 { + #address-cells = <2>; + #size-cells = <1>; + compatible = "fsl,mpc8377-elbc", "fsl,elbc", "simple-bus"; + reg = <0xe0005000 0x1000>; + interrupts = <77 0x8>; + interrupt-parent = <&ipic>; + + // booting from NOR flash + ranges = <0 0x0 0xfe000000 0x02000000 + 1 0x0 0xf8000000 0x00008000 + 3 0x0 0xe0600000 0x00008000>; + + flash@0,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "cfi-flash"; + reg = <0 0x0 0x2000000>; + bank-width = <2>; + device-width = <1>; + + u-boot@0 { + reg = <0x0 0x100000>; + read-only; + }; + + fs@100000 { + reg = <0x100000 0x800000>; + }; + + kernel@1d00000 { + reg = <0x1d00000 0x200000>; + }; + + dtb@1f00000 { + reg = <0x1f00000 0x100000>; + }; + }; + + bcsr@1,0 { + reg = <1 0x0 0x8000>; + compatible = "fsl,mpc837xmds-bcsr"; + }; + + nand@3,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,mpc8377-fcm-nand", + "fsl,elbc-fcm-nand"; + reg = <3 0x0 0x8000>; + + u-boot@0 { + reg = <0x0 0x100000>; + read-only; + }; + + kernel@100000 { + reg = <0x100000 0x300000>; + }; + + fs@400000 { + reg = <0x400000 0x1c00000>; + }; + }; + }; + + soc@e0000000 { + #address-cells = <1>; + #size-cells = <1>; + device_type = "soc"; + compatible = "simple-bus"; + ranges = <0x0 0xe0000000 0x00100000>; + reg = <0xe0000000 0x00000200>; + bus-frequency = <0>; + + wdt@200 { + compatible = "mpc83xx_wdt"; + reg = <0x200 0x100>; + }; + + sleep-nexus { + #address-cells = <1>; + #size-cells = <1>; + compatible = "simple-bus"; + sleep = <&pmc 0x0c000000>; + ranges; + + i2c@3000 { + #address-cells = <1>; + #size-cells = <0>; + cell-index = <0>; + compatible = "fsl-i2c"; + reg = <0x3000 0x100>; + interrupts = <14 0x8>; + interrupt-parent = <&ipic>; + dfsrr; + + rtc@68 { + compatible = "dallas,ds1374"; + reg = <0x68>; + interrupts = <19 0x8>; + interrupt-parent = <&ipic>; + }; + }; + + sdhci@2e000 { + compatible = "fsl,mpc8377-esdhc", "fsl,esdhc"; + reg = <0x2e000 0x1000>; + interrupts = <42 0x8>; + interrupt-parent = <&ipic>; + sdhci,wp-inverted; + /* Filled in by U-Boot */ + clock-frequency = <0>; + }; + }; + + i2c@3100 { + #address-cells = <1>; + #size-cells = <0>; + cell-index = <1>; + compatible = "fsl-i2c"; + reg = <0x3100 0x100>; + interrupts = <15 0x8>; + interrupt-parent = <&ipic>; + dfsrr; + }; + + spi@7000 { + cell-index = <0>; + compatible = "fsl,spi"; + reg = <0x7000 0x1000>; + interrupts = <16 0x8>; + interrupt-parent = <&ipic>; + mode = "cpu"; + }; + + usb@23000 { + compatible = "fsl-usb2-dr"; + reg = <0x23000 0x1000>; + #address-cells = <1>; + #size-cells = <0>; + interrupt-parent = <&ipic>; + interrupts = <38 0x8>; + dr_mode = "host"; + phy_type = "ulpi"; + sleep = <&pmc 0x00c00000>; + }; + + enet0: ethernet@24000 { + #address-cells = <1>; + #size-cells = <1>; + cell-index = <0>; + device_type = "network"; + model = "eTSEC"; + compatible = "gianfar"; + reg = <0x24000 0x1000>; + ranges = <0x0 0x24000 0x1000>; + local-mac-address = [ 00 00 00 00 00 00 ]; + interrupts = <32 0x8 33 0x8 34 0x8>; + phy-connection-type = "mii"; + interrupt-parent = <&ipic>; + tbi-handle = <&tbi0>; + phy-handle = <&phy2>; + sleep = <&pmc 0xc0000000>; + fsl,magic-packet; + + mdio@520 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,gianfar-mdio"; + reg = <0x520 0x20>; + + phy2: ethernet-phy@2 { + interrupt-parent = <&ipic>; + interrupts = <17 0x8>; + reg = <0x2>; + }; + + phy3: ethernet-phy@3 { + interrupt-parent = <&ipic>; + interrupts = <18 0x8>; + reg = <0x3>; + }; + + tbi0: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + }; + + enet1: ethernet@25000 { + #address-cells = <1>; + #size-cells = <1>; + cell-index = <1>; + device_type = "network"; + model = "eTSEC"; + compatible = "gianfar"; + reg = <0x25000 0x1000>; + ranges = <0x0 0x25000 0x1000>; + local-mac-address = [ 00 00 00 00 00 00 ]; + interrupts = <35 0x8 36 0x8 37 0x8>; + phy-connection-type = "mii"; + interrupt-parent = <&ipic>; + tbi-handle = <&tbi1>; + phy-handle = <&phy3>; + sleep = <&pmc 0x30000000>; + fsl,magic-packet; + + mdio@520 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,gianfar-tbi"; + reg = <0x520 0x20>; + + tbi1: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + }; + + serial0: serial@4500 { + cell-index = <0>; + device_type = "serial"; + compatible = "fsl,ns16550", "ns16550"; + reg = <0x4500 0x100>; + clock-frequency = <0>; + interrupts = <9 0x8>; + interrupt-parent = <&ipic>; + }; + + serial1: serial@4600 { + cell-index = <1>; + device_type = "serial"; + compatible = "fsl,ns16550", "ns16550"; + reg = <0x4600 0x100>; + clock-frequency = <0>; + interrupts = <10 0x8>; + interrupt-parent = <&ipic>; + }; + + dma@82a8 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,mpc8377-dma", "fsl,elo-dma"; + reg = <0x82a8 4>; + ranges = <0 0x8100 0x1a8>; + interrupt-parent = <&ipic>; + interrupts = <0x47 8>; + cell-index = <0>; + dma-channel@0 { + compatible = "fsl,mpc8377-dma-channel", "fsl,elo-dma-channel"; + reg = <0 0x80>; + cell-index = <0>; + interrupt-parent = <&ipic>; + interrupts = <0x47 8>; + }; + dma-channel@80 { + compatible = "fsl,mpc8377-dma-channel", "fsl,elo-dma-channel"; + reg = <0x80 0x80>; + cell-index = <1>; + interrupt-parent = <&ipic>; + interrupts = <0x47 8>; + }; + dma-channel@100 { + compatible = "fsl,mpc8377-dma-channel", "fsl,elo-dma-channel"; + reg = <0x100 0x80>; + cell-index = <2>; + interrupt-parent = <&ipic>; + interrupts = <0x47 8>; + }; + dma-channel@180 { + compatible = "fsl,mpc8377-dma-channel", "fsl,elo-dma-channel"; + reg = <0x180 0x28>; + cell-index = <3>; + interrupt-parent = <&ipic>; + interrupts = <0x47 8>; + }; + }; + + crypto@30000 { + compatible = "fsl,sec3.0", "fsl,sec2.4", "fsl,sec2.2", + "fsl,sec2.1", "fsl,sec2.0"; + reg = <0x30000 0x10000>; + interrupts = <11 0x8>; + interrupt-parent = <&ipic>; + fsl,num-channels = <4>; + fsl,channel-fifo-len = <24>; + fsl,exec-units-mask = <0x9fe>; + fsl,descriptor-types-mask = <0x3ab0ebf>; + sleep = <&pmc 0x03000000>; + }; + + sata@18000 { + compatible = "fsl,mpc8379-sata", "fsl,pq-sata"; + reg = <0x18000 0x1000>; + interrupts = <44 0x8>; + interrupt-parent = <&ipic>; + sleep = <&pmc 0x000000c0>; + }; + + sata@19000 { + compatible = "fsl,mpc8379-sata", "fsl,pq-sata"; + reg = <0x19000 0x1000>; + interrupts = <45 0x8>; + interrupt-parent = <&ipic>; + sleep = <&pmc 0x00000030>; + }; + + /* IPIC + * interrupts cell = <intr #, sense> + * sense values match linux IORESOURCE_IRQ_* defines: + * sense == 8: Level, low assertion + * sense == 2: Edge, high-to-low change + */ + ipic: pic@700 { + compatible = "fsl,ipic"; + interrupt-controller; + #address-cells = <0>; + #interrupt-cells = <2>; + reg = <0x700 0x100>; + }; + + pmc: power@b00 { + compatible = "fsl,mpc8377-pmc", "fsl,mpc8349-pmc"; + reg = <0xb00 0x100 0xa00 0x100>; + interrupts = <80 0x8>; + interrupt-parent = <&ipic>; + }; + }; + + pci0: pci@e0008500 { + interrupt-map-mask = <0xf800 0x0 0x0 0x7>; + interrupt-map = < + + /* IDSEL 0x11 */ + 0x8800 0x0 0x0 0x1 &ipic 20 0x8 + 0x8800 0x0 0x0 0x2 &ipic 21 0x8 + 0x8800 0x0 0x0 0x3 &ipic 22 0x8 + 0x8800 0x0 0x0 0x4 &ipic 23 0x8 + + /* IDSEL 0x12 */ + 0x9000 0x0 0x0 0x1 &ipic 22 0x8 + 0x9000 0x0 0x0 0x2 &ipic 23 0x8 + 0x9000 0x0 0x0 0x3 &ipic 20 0x8 + 0x9000 0x0 0x0 0x4 &ipic 21 0x8 + + /* IDSEL 0x13 */ + 0x9800 0x0 0x0 0x1 &ipic 23 0x8 + 0x9800 0x0 0x0 0x2 &ipic 20 0x8 + 0x9800 0x0 0x0 0x3 &ipic 21 0x8 + 0x9800 0x0 0x0 0x4 &ipic 22 0x8 + + /* IDSEL 0x15 */ + 0xa800 0x0 0x0 0x1 &ipic 20 0x8 + 0xa800 0x0 0x0 0x2 &ipic 21 0x8 + 0xa800 0x0 0x0 0x3 &ipic 22 0x8 + 0xa800 0x0 0x0 0x4 &ipic 23 0x8 + + /* IDSEL 0x16 */ + 0xb000 0x0 0x0 0x1 &ipic 23 0x8 + 0xb000 0x0 0x0 0x2 &ipic 20 0x8 + 0xb000 0x0 0x0 0x3 &ipic 21 0x8 + 0xb000 0x0 0x0 0x4 &ipic 22 0x8 + + /* IDSEL 0x17 */ + 0xb800 0x0 0x0 0x1 &ipic 22 0x8 + 0xb800 0x0 0x0 0x2 &ipic 23 0x8 + 0xb800 0x0 0x0 0x3 &ipic 20 0x8 + 0xb800 0x0 0x0 0x4 &ipic 21 0x8 + + /* IDSEL 0x18 */ + 0xc000 0x0 0x0 0x1 &ipic 21 0x8 + 0xc000 0x0 0x0 0x2 &ipic 22 0x8 + 0xc000 0x0 0x0 0x3 &ipic 23 0x8 + 0xc000 0x0 0x0 0x4 &ipic 20 0x8>; + interrupt-parent = <&ipic>; + interrupts = <66 0x8>; + bus-range = <0x0 0x0>; + ranges = <0x02000000 0x0 0x90000000 0x90000000 0x0 0x10000000 + 0x42000000 0x0 0x80000000 0x80000000 0x0 0x10000000 + 0x01000000 0x0 0x00000000 0xe0300000 0x0 0x00100000>; + sleep = <&pmc 0x00010000>; + clock-frequency = <0>; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + reg = <0xe0008500 0x100 /* internal registers */ + 0xe0008300 0x8>; /* config space access registers */ + compatible = "fsl,mpc8349-pci"; + device_type = "pci"; + }; + + pci1: pcie@e0009000 { + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + device_type = "pci"; + compatible = "fsl,mpc8377-pcie", "fsl,mpc8314-pcie"; + reg = <0xe0009000 0x00001000>; + ranges = <0x02000000 0 0xa8000000 0xa8000000 0 0x10000000 + 0x01000000 0 0x00000000 0xb8000000 0 0x00800000>; + bus-range = <0 255>; + interrupt-map-mask = <0xf800 0 0 7>; + interrupt-map = <0 0 0 1 &ipic 1 8 + 0 0 0 2 &ipic 1 8 + 0 0 0 3 &ipic 1 8 + 0 0 0 4 &ipic 1 8>; + sleep = <&pmc 0x00300000>; + clock-frequency = <0>; + + pcie@0 { + #address-cells = <3>; + #size-cells = <2>; + device_type = "pci"; + reg = <0 0 0 0 0>; + ranges = <0x02000000 0 0xa8000000 + 0x02000000 0 0xa8000000 + 0 0x10000000 + 0x01000000 0 0x00000000 + 0x01000000 0 0x00000000 + 0 0x00800000>; + }; + }; + + pci2: pcie@e000a000 { + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + device_type = "pci"; + compatible = "fsl,mpc8377-pcie", "fsl,mpc8314-pcie"; + reg = <0xe000a000 0x00001000>; + ranges = <0x02000000 0 0xc8000000 0xc8000000 0 0x10000000 + 0x01000000 0 0x00000000 0xd8000000 0 0x00800000>; + bus-range = <0 255>; + interrupt-map-mask = <0xf800 0 0 7>; + interrupt-map = <0 0 0 1 &ipic 2 8 + 0 0 0 2 &ipic 2 8 + 0 0 0 3 &ipic 2 8 + 0 0 0 4 &ipic 2 8>; + sleep = <&pmc 0x000c0000>; + clock-frequency = <0>; + + pcie@0 { + #address-cells = <3>; + #size-cells = <2>; + device_type = "pci"; + reg = <0 0 0 0 0>; + ranges = <0x02000000 0 0xc8000000 + 0x02000000 0 0xc8000000 + 0 0x10000000 + 0x01000000 0 0x00000000 + 0x01000000 0 0x00000000 + 0 0x00800000>; + }; + }; +}; diff --git a/arch/powerpc/boot/dts/mpc8377_rdb.dts b/arch/powerpc/boot/dts/mpc8377_rdb.dts new file mode 100644 index 000000000..2b4b6532d --- /dev/null +++ b/arch/powerpc/boot/dts/mpc8377_rdb.dts @@ -0,0 +1,502 @@ +/* + * MPC8377E RDB Device Tree Source + * + * Copyright 2007, 2008 Freescale Semiconductor Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +/dts-v1/; + +/ { + compatible = "fsl,mpc8377rdb"; + #address-cells = <1>; + #size-cells = <1>; + + aliases { + ethernet0 = &enet0; + ethernet1 = &enet1; + serial0 = &serial0; + serial1 = &serial1; + pci0 = &pci0; + pci1 = &pci1; + pci2 = &pci2; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + PowerPC,8377@0 { + device_type = "cpu"; + reg = <0x0>; + d-cache-line-size = <32>; + i-cache-line-size = <32>; + d-cache-size = <32768>; + i-cache-size = <32768>; + timebase-frequency = <0>; + bus-frequency = <0>; + clock-frequency = <0>; + }; + }; + + memory { + device_type = "memory"; + reg = <0x00000000 0x10000000>; // 256MB at 0 + }; + + localbus@e0005000 { + #address-cells = <2>; + #size-cells = <1>; + compatible = "fsl,mpc8377-elbc", "fsl,elbc", "simple-bus"; + reg = <0xe0005000 0x1000>; + interrupts = <77 0x8>; + interrupt-parent = <&ipic>; + + // CS0 and CS1 are swapped when + // booting from nand, but the + // addresses are the same. + ranges = <0x0 0x0 0xfe000000 0x00800000 + 0x1 0x0 0xe0600000 0x00008000 + 0x2 0x0 0xf0000000 0x00020000 + 0x3 0x0 0xfa000000 0x00008000>; + + flash@0,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "cfi-flash"; + reg = <0x0 0x0 0x800000>; + bank-width = <2>; + device-width = <1>; + }; + + nand@1,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,mpc8377-fcm-nand", + "fsl,elbc-fcm-nand"; + reg = <0x1 0x0 0x8000>; + + u-boot@0 { + reg = <0x0 0x100000>; + read-only; + }; + + kernel@100000 { + reg = <0x100000 0x300000>; + }; + fs@400000 { + reg = <0x400000 0x1c00000>; + }; + }; + }; + + immr@e0000000 { + #address-cells = <1>; + #size-cells = <1>; + device_type = "soc"; + compatible = "simple-bus"; + ranges = <0x0 0xe0000000 0x00100000>; + reg = <0xe0000000 0x00000200>; + bus-frequency = <0>; + + wdt@200 { + device_type = "watchdog"; + compatible = "mpc83xx_wdt"; + reg = <0x200 0x100>; + }; + + gpio1: gpio-controller@c00 { + #gpio-cells = <2>; + compatible = "fsl,mpc8377-gpio", "fsl,mpc8349-gpio"; + reg = <0xc00 0x100>; + interrupts = <74 0x8>; + interrupt-parent = <&ipic>; + gpio-controller; + }; + + gpio2: gpio-controller@d00 { + #gpio-cells = <2>; + compatible = "fsl,mpc8377-gpio", "fsl,mpc8349-gpio"; + reg = <0xd00 0x100>; + interrupts = <75 0x8>; + interrupt-parent = <&ipic>; + gpio-controller; + }; + + sleep-nexus { + #address-cells = <1>; + #size-cells = <1>; + compatible = "simple-bus"; + sleep = <&pmc 0x0c000000>; + ranges; + + i2c@3000 { + #address-cells = <1>; + #size-cells = <0>; + cell-index = <0>; + compatible = "fsl-i2c"; + reg = <0x3000 0x100>; + interrupts = <14 0x8>; + interrupt-parent = <&ipic>; + dfsrr; + + dtt@48 { + compatible = "national,lm75"; + reg = <0x48>; + }; + + at24@50 { + compatible = "at24,24c256"; + reg = <0x50>; + }; + + rtc@68 { + compatible = "dallas,ds1339"; + reg = <0x68>; + }; + + mcu_pio: mcu@a { + #gpio-cells = <2>; + compatible = "fsl,mc9s08qg8-mpc8377erdb", + "fsl,mcu-mpc8349emitx"; + reg = <0x0a>; + gpio-controller; + }; + }; + + sdhci@2e000 { + compatible = "fsl,mpc8377-esdhc", "fsl,esdhc"; + reg = <0x2e000 0x1000>; + interrupts = <42 0x8>; + interrupt-parent = <&ipic>; + sdhci,wp-inverted; + /* Filled in by U-Boot */ + clock-frequency = <111111111>; + }; + }; + + i2c@3100 { + #address-cells = <1>; + #size-cells = <0>; + cell-index = <1>; + compatible = "fsl-i2c"; + reg = <0x3100 0x100>; + interrupts = <15 0x8>; + interrupt-parent = <&ipic>; + dfsrr; + }; + + spi@7000 { + cell-index = <0>; + compatible = "fsl,spi"; + reg = <0x7000 0x1000>; + interrupts = <16 0x8>; + interrupt-parent = <&ipic>; + mode = "cpu"; + }; + + dma@82a8 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,mpc8377-dma", "fsl,elo-dma"; + reg = <0x82a8 4>; + ranges = <0 0x8100 0x1a8>; + interrupt-parent = <&ipic>; + interrupts = <71 8>; + cell-index = <0>; + dma-channel@0 { + compatible = "fsl,mpc8377-dma-channel", "fsl,elo-dma-channel"; + reg = <0 0x80>; + cell-index = <0>; + interrupt-parent = <&ipic>; + interrupts = <71 8>; + }; + dma-channel@80 { + compatible = "fsl,mpc8377-dma-channel", "fsl,elo-dma-channel"; + reg = <0x80 0x80>; + cell-index = <1>; + interrupt-parent = <&ipic>; + interrupts = <71 8>; + }; + dma-channel@100 { + compatible = "fsl,mpc8377-dma-channel", "fsl,elo-dma-channel"; + reg = <0x100 0x80>; + cell-index = <2>; + interrupt-parent = <&ipic>; + interrupts = <71 8>; + }; + dma-channel@180 { + compatible = "fsl,mpc8377-dma-channel", "fsl,elo-dma-channel"; + reg = <0x180 0x28>; + cell-index = <3>; + interrupt-parent = <&ipic>; + interrupts = <71 8>; + }; + }; + + usb@23000 { + compatible = "fsl-usb2-dr"; + reg = <0x23000 0x1000>; + #address-cells = <1>; + #size-cells = <0>; + interrupt-parent = <&ipic>; + interrupts = <38 0x8>; + phy_type = "ulpi"; + sleep = <&pmc 0x00c00000>; + }; + + enet0: ethernet@24000 { + #address-cells = <1>; + #size-cells = <1>; + cell-index = <0>; + device_type = "network"; + model = "eTSEC"; + compatible = "gianfar"; + reg = <0x24000 0x1000>; + ranges = <0x0 0x24000 0x1000>; + local-mac-address = [ 00 00 00 00 00 00 ]; + interrupts = <32 0x8 33 0x8 34 0x8>; + phy-connection-type = "mii"; + interrupt-parent = <&ipic>; + tbi-handle = <&tbi0>; + phy-handle = <&phy2>; + sleep = <&pmc 0xc0000000>; + fsl,magic-packet; + + mdio@520 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,gianfar-mdio"; + reg = <0x520 0x20>; + + phy2: ethernet-phy@2 { + interrupt-parent = <&ipic>; + interrupts = <17 0x8>; + reg = <0x2>; + }; + + tbi0: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + }; + + enet1: ethernet@25000 { + #address-cells = <1>; + #size-cells = <1>; + cell-index = <1>; + device_type = "network"; + model = "eTSEC"; + compatible = "gianfar"; + reg = <0x25000 0x1000>; + ranges = <0x0 0x25000 0x1000>; + local-mac-address = [ 00 00 00 00 00 00 ]; + interrupts = <35 0x8 36 0x8 37 0x8>; + phy-connection-type = "mii"; + interrupt-parent = <&ipic>; + fixed-link = <1 1 1000 0 0>; + tbi-handle = <&tbi1>; + sleep = <&pmc 0x30000000>; + fsl,magic-packet; + + mdio@520 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,gianfar-tbi"; + reg = <0x520 0x20>; + + tbi1: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + }; + + serial0: serial@4500 { + cell-index = <0>; + device_type = "serial"; + compatible = "fsl,ns16550", "ns16550"; + reg = <0x4500 0x100>; + clock-frequency = <0>; + interrupts = <9 0x8>; + interrupt-parent = <&ipic>; + }; + + serial1: serial@4600 { + cell-index = <1>; + device_type = "serial"; + compatible = "fsl,ns16550", "ns16550"; + reg = <0x4600 0x100>; + clock-frequency = <0>; + interrupts = <10 0x8>; + interrupt-parent = <&ipic>; + }; + + crypto@30000 { + compatible = "fsl,sec3.0", "fsl,sec2.4", "fsl,sec2.2", + "fsl,sec2.1", "fsl,sec2.0"; + reg = <0x30000 0x10000>; + interrupts = <11 0x8>; + interrupt-parent = <&ipic>; + fsl,num-channels = <4>; + fsl,channel-fifo-len = <24>; + fsl,exec-units-mask = <0x9fe>; + fsl,descriptor-types-mask = <0x3ab0ebf>; + sleep = <&pmc 0x03000000>; + }; + + sata@18000 { + compatible = "fsl,mpc8377-sata", "fsl,pq-sata"; + reg = <0x18000 0x1000>; + interrupts = <44 0x8>; + interrupt-parent = <&ipic>; + sleep = <&pmc 0x000000c0>; + }; + + sata@19000 { + compatible = "fsl,mpc8377-sata", "fsl,pq-sata"; + reg = <0x19000 0x1000>; + interrupts = <45 0x8>; + interrupt-parent = <&ipic>; + sleep = <&pmc 0x00000030>; + }; + + /* IPIC + * interrupts cell = <intr #, sense> + * sense values match linux IORESOURCE_IRQ_* defines: + * sense == 8: Level, low assertion + * sense == 2: Edge, high-to-low change + */ + ipic: interrupt-controller@700 { + compatible = "fsl,ipic"; + interrupt-controller; + #address-cells = <0>; + #interrupt-cells = <2>; + reg = <0x700 0x100>; + }; + + pmc: power@b00 { + compatible = "fsl,mpc8377-pmc", "fsl,mpc8349-pmc"; + reg = <0xb00 0x100 0xa00 0x100>; + interrupts = <80 0x8>; + interrupt-parent = <&ipic>; + }; + }; + + pci0: pci@e0008500 { + interrupt-map-mask = <0xf800 0 0 7>; + interrupt-map = < + /* IRQ5 = 21 = 0x15, IRQ6 = 0x16, IRQ7 = 23 = 0x17 */ + + /* IDSEL AD14 IRQ6 inta */ + 0x7000 0x0 0x0 0x1 &ipic 22 0x8 + + /* IDSEL AD15 IRQ5 inta, IRQ6 intb, IRQ7 intd */ + 0x7800 0x0 0x0 0x1 &ipic 21 0x8 + 0x7800 0x0 0x0 0x2 &ipic 22 0x8 + 0x7800 0x0 0x0 0x4 &ipic 23 0x8 + + /* IDSEL AD28 IRQ7 inta, IRQ5 intb IRQ6 intc*/ + 0xE000 0x0 0x0 0x1 &ipic 23 0x8 + 0xE000 0x0 0x0 0x2 &ipic 21 0x8 + 0xE000 0x0 0x0 0x3 &ipic 22 0x8>; + interrupt-parent = <&ipic>; + interrupts = <66 0x8>; + bus-range = <0 0>; + ranges = <0x02000000 0x0 0x90000000 0x90000000 0x0 0x10000000 + 0x42000000 0x0 0x80000000 0x80000000 0x0 0x10000000 + 0x01000000 0x0 0x00000000 0xe0300000 0x0 0x00100000>; + sleep = <&pmc 0x00010000>; + clock-frequency = <66666666>; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + reg = <0xe0008500 0x100 /* internal registers */ + 0xe0008300 0x8>; /* config space access registers */ + compatible = "fsl,mpc8349-pci"; + device_type = "pci"; + }; + + pci1: pcie@e0009000 { + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + device_type = "pci"; + compatible = "fsl,mpc8377-pcie", "fsl,mpc8314-pcie"; + reg = <0xe0009000 0x00001000>; + ranges = <0x02000000 0 0xa8000000 0xa8000000 0 0x10000000 + 0x01000000 0 0x00000000 0xb8000000 0 0x00800000>; + bus-range = <0 255>; + interrupt-map-mask = <0xf800 0 0 7>; + interrupt-map = <0 0 0 1 &ipic 1 8 + 0 0 0 2 &ipic 1 8 + 0 0 0 3 &ipic 1 8 + 0 0 0 4 &ipic 1 8>; + sleep = <&pmc 0x00300000>; + clock-frequency = <0>; + + pcie@0 { + #address-cells = <3>; + #size-cells = <2>; + device_type = "pci"; + reg = <0 0 0 0 0>; + ranges = <0x02000000 0 0xa8000000 + 0x02000000 0 0xa8000000 + 0 0x10000000 + 0x01000000 0 0x00000000 + 0x01000000 0 0x00000000 + 0 0x00800000>; + }; + }; + + pci2: pcie@e000a000 { + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + device_type = "pci"; + compatible = "fsl,mpc8377-pcie", "fsl,mpc8314-pcie"; + reg = <0xe000a000 0x00001000>; + ranges = <0x02000000 0 0xc8000000 0xc8000000 0 0x10000000 + 0x01000000 0 0x00000000 0xd8000000 0 0x00800000>; + bus-range = <0 255>; + interrupt-map-mask = <0xf800 0 0 7>; + interrupt-map = <0 0 0 1 &ipic 2 8 + 0 0 0 2 &ipic 2 8 + 0 0 0 3 &ipic 2 8 + 0 0 0 4 &ipic 2 8>; + sleep = <&pmc 0x000c0000>; + clock-frequency = <0>; + + pcie@0 { + #address-cells = <3>; + #size-cells = <2>; + device_type = "pci"; + reg = <0 0 0 0 0>; + ranges = <0x02000000 0 0xc8000000 + 0x02000000 0 0xc8000000 + 0 0x10000000 + 0x01000000 0 0x00000000 + 0x01000000 0 0x00000000 + 0 0x00800000>; + }; + }; + + leds { + compatible = "gpio-leds"; + + pwr { + gpios = <&mcu_pio 0 0>; + default-state = "on"; + }; + + hdd { + gpios = <&mcu_pio 1 0>; + linux,default-trigger = "ide-disk"; + }; + }; +}; diff --git a/arch/powerpc/boot/dts/mpc8377_wlan.dts b/arch/powerpc/boot/dts/mpc8377_wlan.dts new file mode 100644 index 000000000..c0c790168 --- /dev/null +++ b/arch/powerpc/boot/dts/mpc8377_wlan.dts @@ -0,0 +1,463 @@ +/* + * MPC8377E WLAN Device Tree Source + * + * Copyright 2007-2009 Freescale Semiconductor Inc. + * Copyright 2009 MontaVista Software, Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +/dts-v1/; + +/ { + compatible = "fsl,mpc8377wlan"; + #address-cells = <1>; + #size-cells = <1>; + + aliases { + ethernet0 = &enet0; + ethernet1 = &enet1; + serial0 = &serial0; + serial1 = &serial1; + pci0 = &pci0; + pci1 = &pci1; + pci2 = &pci2; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + PowerPC,8377@0 { + device_type = "cpu"; + reg = <0x0>; + d-cache-line-size = <32>; + i-cache-line-size = <32>; + d-cache-size = <32768>; + i-cache-size = <32768>; + timebase-frequency = <0>; + bus-frequency = <0>; + clock-frequency = <0>; + }; + }; + + memory { + device_type = "memory"; + reg = <0x00000000 0x20000000>; // 512MB at 0 + }; + + localbus@e0005000 { + #address-cells = <2>; + #size-cells = <1>; + compatible = "fsl,mpc8377-elbc", "fsl,elbc", "simple-bus"; + reg = <0xe0005000 0x1000>; + interrupts = <77 0x8>; + interrupt-parent = <&ipic>; + ranges = <0x0 0x0 0xfc000000 0x04000000>; + + flash@0,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "cfi-flash"; + reg = <0x0 0x0 0x4000000>; + bank-width = <2>; + device-width = <1>; + + partition@0 { + reg = <0 0x80000>; + label = "u-boot"; + read-only; + }; + + partition@a0000 { + reg = <0xa0000 0x300000>; + label = "kernel"; + }; + + partition@3a0000 { + reg = <0x3a0000 0x3c60000>; + label = "rootfs"; + }; + }; + }; + + immr@e0000000 { + #address-cells = <1>; + #size-cells = <1>; + device_type = "soc"; + compatible = "simple-bus"; + ranges = <0x0 0xe0000000 0x00100000>; + reg = <0xe0000000 0x00000200>; + bus-frequency = <0>; + + wdt@200 { + device_type = "watchdog"; + compatible = "mpc83xx_wdt"; + reg = <0x200 0x100>; + }; + + gpio1: gpio-controller@c00 { + #gpio-cells = <2>; + compatible = "fsl,mpc8377-gpio", "fsl,mpc8349-gpio"; + reg = <0xc00 0x100>; + interrupts = <74 0x8>; + interrupt-parent = <&ipic>; + gpio-controller; + }; + + gpio2: gpio-controller@d00 { + #gpio-cells = <2>; + compatible = "fsl,mpc8377-gpio", "fsl,mpc8349-gpio"; + reg = <0xd00 0x100>; + interrupts = <75 0x8>; + interrupt-parent = <&ipic>; + gpio-controller; + }; + + sleep-nexus { + #address-cells = <1>; + #size-cells = <1>; + compatible = "simple-bus"; + sleep = <&pmc 0x0c000000>; + ranges; + + i2c@3000 { + #address-cells = <1>; + #size-cells = <0>; + cell-index = <0>; + compatible = "fsl-i2c"; + reg = <0x3000 0x100>; + interrupts = <14 0x8>; + interrupt-parent = <&ipic>; + dfsrr; + + at24@50 { + compatible = "at24,24c256"; + reg = <0x50>; + }; + + rtc@68 { + compatible = "dallas,ds1339"; + reg = <0x68>; + }; + }; + + sdhci@2e000 { + compatible = "fsl,mpc8377-esdhc", "fsl,esdhc"; + reg = <0x2e000 0x1000>; + interrupts = <42 0x8>; + interrupt-parent = <&ipic>; + sdhci,wp-inverted; + clock-frequency = <133333333>; + }; + }; + + i2c@3100 { + #address-cells = <1>; + #size-cells = <0>; + cell-index = <1>; + compatible = "fsl-i2c"; + reg = <0x3100 0x100>; + interrupts = <15 0x8>; + interrupt-parent = <&ipic>; + dfsrr; + }; + + spi@7000 { + cell-index = <0>; + compatible = "fsl,spi"; + reg = <0x7000 0x1000>; + interrupts = <16 0x8>; + interrupt-parent = <&ipic>; + mode = "cpu"; + }; + + dma@82a8 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,mpc8377-dma", "fsl,elo-dma"; + reg = <0x82a8 4>; + ranges = <0 0x8100 0x1a8>; + interrupt-parent = <&ipic>; + interrupts = <71 8>; + cell-index = <0>; + dma-channel@0 { + compatible = "fsl,mpc8377-dma-channel", "fsl,elo-dma-channel"; + reg = <0 0x80>; + cell-index = <0>; + interrupt-parent = <&ipic>; + interrupts = <71 8>; + }; + dma-channel@80 { + compatible = "fsl,mpc8377-dma-channel", "fsl,elo-dma-channel"; + reg = <0x80 0x80>; + cell-index = <1>; + interrupt-parent = <&ipic>; + interrupts = <71 8>; + }; + dma-channel@100 { + compatible = "fsl,mpc8377-dma-channel", "fsl,elo-dma-channel"; + reg = <0x100 0x80>; + cell-index = <2>; + interrupt-parent = <&ipic>; + interrupts = <71 8>; + }; + dma-channel@180 { + compatible = "fsl,mpc8377-dma-channel", "fsl,elo-dma-channel"; + reg = <0x180 0x28>; + cell-index = <3>; + interrupt-parent = <&ipic>; + interrupts = <71 8>; + }; + }; + + usb@23000 { + compatible = "fsl-usb2-dr"; + reg = <0x23000 0x1000>; + #address-cells = <1>; + #size-cells = <0>; + interrupt-parent = <&ipic>; + interrupts = <38 0x8>; + phy_type = "ulpi"; + sleep = <&pmc 0x00c00000>; + }; + + enet0: ethernet@24000 { + #address-cells = <1>; + #size-cells = <1>; + cell-index = <0>; + device_type = "network"; + model = "eTSEC"; + compatible = "gianfar"; + reg = <0x24000 0x1000>; + ranges = <0x0 0x24000 0x1000>; + local-mac-address = [ 00 00 00 00 00 00 ]; + interrupts = <32 0x8 33 0x8 34 0x8>; + phy-connection-type = "mii"; + interrupt-parent = <&ipic>; + tbi-handle = <&tbi0>; + phy-handle = <&phy2>; + sleep = <&pmc 0xc0000000>; + fsl,magic-packet; + + mdio@520 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,gianfar-mdio"; + reg = <0x520 0x20>; + + phy2: ethernet-phy@2 { + interrupt-parent = <&ipic>; + interrupts = <17 0x8>; + reg = <0x2>; + }; + + phy3: ethernet-phy@3 { + interrupt-parent = <&ipic>; + interrupts = <18 0x8>; + reg = <0x3>; + }; + + tbi0: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + }; + + enet1: ethernet@25000 { + #address-cells = <1>; + #size-cells = <1>; + cell-index = <1>; + device_type = "network"; + model = "eTSEC"; + compatible = "gianfar"; + reg = <0x25000 0x1000>; + ranges = <0x0 0x25000 0x1000>; + local-mac-address = [ 00 00 00 00 00 00 ]; + interrupts = <35 0x8 36 0x8 37 0x8>; + phy-connection-type = "mii"; + interrupt-parent = <&ipic>; + phy-handle = <&phy3>; + tbi-handle = <&tbi1>; + sleep = <&pmc 0x30000000>; + fsl,magic-packet; + + mdio@520 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,gianfar-tbi"; + reg = <0x520 0x20>; + + tbi1: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + }; + + serial0: serial@4500 { + cell-index = <0>; + device_type = "serial"; + compatible = "fsl,ns16550", "ns16550"; + reg = <0x4500 0x100>; + clock-frequency = <0>; + interrupts = <9 0x8>; + interrupt-parent = <&ipic>; + }; + + serial1: serial@4600 { + cell-index = <1>; + device_type = "serial"; + compatible = "fsl,ns16550", "ns16550"; + reg = <0x4600 0x100>; + clock-frequency = <0>; + interrupts = <10 0x8>; + interrupt-parent = <&ipic>; + }; + + crypto@30000 { + compatible = "fsl,sec3.0", "fsl,sec2.4", "fsl,sec2.2", + "fsl,sec2.1", "fsl,sec2.0"; + reg = <0x30000 0x10000>; + interrupts = <11 0x8>; + interrupt-parent = <&ipic>; + fsl,num-channels = <4>; + fsl,channel-fifo-len = <24>; + fsl,exec-units-mask = <0x9fe>; + fsl,descriptor-types-mask = <0x3ab0ebf>; + sleep = <&pmc 0x03000000>; + }; + + sata@18000 { + compatible = "fsl,mpc8377-sata", "fsl,pq-sata"; + reg = <0x18000 0x1000>; + interrupts = <44 0x8>; + interrupt-parent = <&ipic>; + sleep = <&pmc 0x000000c0>; + }; + + sata@19000 { + compatible = "fsl,mpc8377-sata", "fsl,pq-sata"; + reg = <0x19000 0x1000>; + interrupts = <45 0x8>; + interrupt-parent = <&ipic>; + sleep = <&pmc 0x00000030>; + }; + + /* IPIC + * interrupts cell = <intr #, sense> + * sense values match linux IORESOURCE_IRQ_* defines: + * sense == 8: Level, low assertion + * sense == 2: Edge, high-to-low change + */ + ipic: interrupt-controller@700 { + compatible = "fsl,ipic"; + interrupt-controller; + #address-cells = <0>; + #interrupt-cells = <2>; + reg = <0x700 0x100>; + }; + + pmc: power@b00 { + compatible = "fsl,mpc8377-pmc", "fsl,mpc8349-pmc"; + reg = <0xb00 0x100 0xa00 0x100>; + interrupts = <80 0x8>; + interrupt-parent = <&ipic>; + }; + }; + + pci0: pci@e0008500 { + interrupt-map-mask = <0xf800 0 0 7>; + interrupt-map = < + /* IRQ5 = 21 = 0x15, IRQ6 = 0x16, IRQ7 = 23 = 0x17 */ + + /* IDSEL AD14 IRQ6 inta */ + 0x7000 0x0 0x0 0x1 &ipic 22 0x8 + + /* IDSEL AD15 IRQ5 inta */ + 0x7800 0x0 0x0 0x1 &ipic 21 0x8>; + interrupt-parent = <&ipic>; + interrupts = <66 0x8>; + bus-range = <0 0>; + ranges = <0x02000000 0x0 0x90000000 0x90000000 0x0 0x10000000 + 0x42000000 0x0 0x80000000 0x80000000 0x0 0x10000000 + 0x01000000 0x0 0x00000000 0xe0300000 0x0 0x00100000>; + sleep = <&pmc 0x00010000>; + clock-frequency = <66666666>; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + reg = <0xe0008500 0x100 /* internal registers */ + 0xe0008300 0x8>; /* config space access registers */ + compatible = "fsl,mpc8349-pci"; + device_type = "pci"; + }; + + pci1: pcie@e0009000 { + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + device_type = "pci"; + compatible = "fsl,mpc8377-pcie", "fsl,mpc8314-pcie"; + reg = <0xe0009000 0x00001000>; + ranges = <0x02000000 0 0xa8000000 0xa8000000 0 0x10000000 + 0x01000000 0 0x00000000 0xb8000000 0 0x00800000>; + bus-range = <0 255>; + interrupt-map-mask = <0xf800 0 0 7>; + interrupt-map = <0 0 0 1 &ipic 1 8 + 0 0 0 2 &ipic 1 8 + 0 0 0 3 &ipic 1 8 + 0 0 0 4 &ipic 1 8>; + sleep = <&pmc 0x00300000>; + clock-frequency = <0>; + + pcie@0 { + #address-cells = <3>; + #size-cells = <2>; + device_type = "pci"; + reg = <0 0 0 0 0>; + ranges = <0x02000000 0 0xa8000000 + 0x02000000 0 0xa8000000 + 0 0x10000000 + 0x01000000 0 0x00000000 + 0x01000000 0 0x00000000 + 0 0x00800000>; + }; + }; + + pci2: pcie@e000a000 { + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + device_type = "pci"; + compatible = "fsl,mpc8377-pcie", "fsl,mpc8314-pcie"; + reg = <0xe000a000 0x00001000>; + ranges = <0x02000000 0 0xc8000000 0xc8000000 0 0x10000000 + 0x01000000 0 0x00000000 0xd8000000 0 0x00800000>; + bus-range = <0 255>; + interrupt-map-mask = <0xf800 0 0 7>; + interrupt-map = <0 0 0 1 &ipic 2 8 + 0 0 0 2 &ipic 2 8 + 0 0 0 3 &ipic 2 8 + 0 0 0 4 &ipic 2 8>; + sleep = <&pmc 0x000c0000>; + clock-frequency = <0>; + + pcie@0 { + #address-cells = <3>; + #size-cells = <2>; + device_type = "pci"; + reg = <0 0 0 0 0>; + ranges = <0x02000000 0 0xc8000000 + 0x02000000 0 0xc8000000 + 0 0x10000000 + 0x01000000 0 0x00000000 + 0x01000000 0 0x00000000 + 0 0x00800000>; + }; + }; +}; diff --git a/arch/powerpc/boot/dts/mpc8378_mds.dts b/arch/powerpc/boot/dts/mpc8378_mds.dts new file mode 100644 index 000000000..1b82b77f9 --- /dev/null +++ b/arch/powerpc/boot/dts/mpc8378_mds.dts @@ -0,0 +1,493 @@ +/* + * MPC8378E MDS Device Tree Source + * + * Copyright 2007 Freescale Semiconductor Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +/dts-v1/; + +/ { + model = "fsl,mpc8378emds"; + compatible = "fsl,mpc8378emds","fsl,mpc837xmds"; + #address-cells = <1>; + #size-cells = <1>; + + aliases { + ethernet0 = &enet0; + ethernet1 = &enet1; + serial0 = &serial0; + serial1 = &serial1; + pci0 = &pci0; + pci1 = &pci1; + pci2 = &pci2; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + PowerPC,8378@0 { + device_type = "cpu"; + reg = <0x0>; + d-cache-line-size = <32>; + i-cache-line-size = <32>; + d-cache-size = <32768>; + i-cache-size = <32768>; + timebase-frequency = <0>; + bus-frequency = <0>; + clock-frequency = <0>; + }; + }; + + memory { + device_type = "memory"; + reg = <0x00000000 0x20000000>; // 512MB at 0 + }; + + localbus@e0005000 { + #address-cells = <2>; + #size-cells = <1>; + compatible = "fsl,mpc8378-elbc", "fsl,elbc", "simple-bus"; + reg = <0xe0005000 0x1000>; + interrupts = <77 0x8>; + interrupt-parent = <&ipic>; + + // booting from NOR flash + ranges = <0 0x0 0xfe000000 0x02000000 + 1 0x0 0xf8000000 0x00008000 + 3 0x0 0xe0600000 0x00008000>; + + flash@0,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "cfi-flash"; + reg = <0 0x0 0x2000000>; + bank-width = <2>; + device-width = <1>; + + u-boot@0 { + reg = <0x0 0x100000>; + read-only; + }; + + fs@100000 { + reg = <0x100000 0x800000>; + }; + + kernel@1d00000 { + reg = <0x1d00000 0x200000>; + }; + + dtb@1f00000 { + reg = <0x1f00000 0x100000>; + }; + }; + + bcsr@1,0 { + reg = <1 0x0 0x8000>; + compatible = "fsl,mpc837xmds-bcsr"; + }; + + nand@3,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,mpc8378-fcm-nand", + "fsl,elbc-fcm-nand"; + reg = <3 0x0 0x8000>; + + u-boot@0 { + reg = <0x0 0x100000>; + read-only; + }; + + kernel@100000 { + reg = <0x100000 0x300000>; + }; + + fs@400000 { + reg = <0x400000 0x1c00000>; + }; + }; + }; + + soc@e0000000 { + #address-cells = <1>; + #size-cells = <1>; + device_type = "soc"; + compatible = "simple-bus"; + ranges = <0x0 0xe0000000 0x00100000>; + reg = <0xe0000000 0x00000200>; + bus-frequency = <0>; + + wdt@200 { + compatible = "mpc83xx_wdt"; + reg = <0x200 0x100>; + }; + + sleep-nexus { + #address-cells = <1>; + #size-cells = <1>; + compatible = "simple-bus"; + sleep = <&pmc 0x0c000000>; + ranges; + + i2c@3000 { + #address-cells = <1>; + #size-cells = <0>; + cell-index = <0>; + compatible = "fsl-i2c"; + reg = <0x3000 0x100>; + interrupts = <14 0x8>; + interrupt-parent = <&ipic>; + dfsrr; + + rtc@68 { + compatible = "dallas,ds1374"; + reg = <0x68>; + interrupts = <19 0x8>; + interrupt-parent = <&ipic>; + }; + }; + + sdhci@2e000 { + compatible = "fsl,mpc8378-esdhc", "fsl,esdhc"; + reg = <0x2e000 0x1000>; + interrupts = <42 0x8>; + interrupt-parent = <&ipic>; + sdhci,wp-inverted; + /* Filled in by U-Boot */ + clock-frequency = <0>; + }; + }; + + i2c@3100 { + #address-cells = <1>; + #size-cells = <0>; + cell-index = <1>; + compatible = "fsl-i2c"; + reg = <0x3100 0x100>; + interrupts = <15 0x8>; + interrupt-parent = <&ipic>; + dfsrr; + }; + + spi@7000 { + cell-index = <0>; + compatible = "fsl,spi"; + reg = <0x7000 0x1000>; + interrupts = <16 0x8>; + interrupt-parent = <&ipic>; + mode = "cpu"; + }; + + dma@82a8 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,mpc8378-dma", "fsl,elo-dma"; + reg = <0x82a8 4>; + ranges = <0 0x8100 0x1a8>; + interrupt-parent = <&ipic>; + interrupts = <71 8>; + cell-index = <0>; + dma-channel@0 { + compatible = "fsl,mpc8378-dma-channel", "fsl,elo-dma-channel"; + reg = <0 0x80>; + cell-index = <0>; + interrupt-parent = <&ipic>; + interrupts = <71 8>; + }; + dma-channel@80 { + compatible = "fsl,mpc8378-dma-channel", "fsl,elo-dma-channel"; + reg = <0x80 0x80>; + cell-index = <1>; + interrupt-parent = <&ipic>; + interrupts = <71 8>; + }; + dma-channel@100 { + compatible = "fsl,mpc8378-dma-channel", "fsl,elo-dma-channel"; + reg = <0x100 0x80>; + cell-index = <2>; + interrupt-parent = <&ipic>; + interrupts = <71 8>; + }; + dma-channel@180 { + compatible = "fsl,mpc8378-dma-channel", "fsl,elo-dma-channel"; + reg = <0x180 0x28>; + cell-index = <3>; + interrupt-parent = <&ipic>; + interrupts = <71 8>; + }; + }; + + usb@23000 { + compatible = "fsl-usb2-dr"; + reg = <0x23000 0x1000>; + #address-cells = <1>; + #size-cells = <0>; + interrupt-parent = <&ipic>; + interrupts = <38 0x8>; + dr_mode = "host"; + phy_type = "ulpi"; + sleep = <&pmc 0x00c00000>; + }; + + enet0: ethernet@24000 { + #address-cells = <1>; + #size-cells = <1>; + cell-index = <0>; + device_type = "network"; + model = "eTSEC"; + compatible = "gianfar"; + reg = <0x24000 0x1000>; + ranges = <0x0 0x24000 0x1000>; + local-mac-address = [ 00 00 00 00 00 00 ]; + interrupts = <32 0x8 33 0x8 34 0x8>; + phy-connection-type = "mii"; + interrupt-parent = <&ipic>; + tbi-handle = <&tbi0>; + phy-handle = <&phy2>; + sleep = <&pmc 0xc0000000>; + fsl,magic-packet; + + mdio@520 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,gianfar-mdio"; + reg = <0x520 0x20>; + + phy2: ethernet-phy@2 { + interrupt-parent = <&ipic>; + interrupts = <17 0x8>; + reg = <0x2>; + }; + + phy3: ethernet-phy@3 { + interrupt-parent = <&ipic>; + interrupts = <18 0x8>; + reg = <0x3>; + }; + + tbi0: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + }; + + enet1: ethernet@25000 { + #address-cells = <1>; + #size-cells = <1>; + cell-index = <1>; + device_type = "network"; + model = "eTSEC"; + compatible = "gianfar"; + reg = <0x25000 0x1000>; + ranges = <0x0 0x25000 0x1000>; + local-mac-address = [ 00 00 00 00 00 00 ]; + interrupts = <35 0x8 36 0x8 37 0x8>; + phy-connection-type = "mii"; + interrupt-parent = <&ipic>; + tbi-handle = <&tbi1>; + phy-handle = <&phy3>; + sleep = <&pmc 0x30000000>; + fsl,magic-packet; + + mdio@520 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,gianfar-tbi"; + reg = <0x520 0x20>; + + tbi1: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + }; + + serial0: serial@4500 { + cell-index = <0>; + device_type = "serial"; + compatible = "fsl,ns16550", "ns16550"; + reg = <0x4500 0x100>; + clock-frequency = <0>; + interrupts = <9 0x8>; + interrupt-parent = <&ipic>; + }; + + serial1: serial@4600 { + cell-index = <1>; + device_type = "serial"; + compatible = "fsl,ns16550", "ns16550"; + reg = <0x4600 0x100>; + clock-frequency = <0>; + interrupts = <10 0x8>; + interrupt-parent = <&ipic>; + }; + + crypto@30000 { + compatible = "fsl,sec3.0", "fsl,sec2.4", "fsl,sec2.2", + "fsl,sec2.1", "fsl,sec2.0"; + reg = <0x30000 0x10000>; + interrupts = <11 0x8>; + interrupt-parent = <&ipic>; + fsl,num-channels = <4>; + fsl,channel-fifo-len = <24>; + fsl,exec-units-mask = <0x9fe>; + fsl,descriptor-types-mask = <0x3ab0ebf>; + sleep = <&pmc 0x03000000>; + }; + + /* IPIC + * interrupts cell = <intr #, sense> + * sense values match linux IORESOURCE_IRQ_* defines: + * sense == 8: Level, low assertion + * sense == 2: Edge, high-to-low change + */ + ipic: pic@700 { + compatible = "fsl,ipic"; + interrupt-controller; + #address-cells = <0>; + #interrupt-cells = <2>; + reg = <0x700 0x100>; + }; + + pmc: power@b00 { + compatible = "fsl,mpc8378-pmc", "fsl,mpc8349-pmc"; + reg = <0xb00 0x100 0xa00 0x100>; + interrupts = <80 0x8>; + interrupt-parent = <&ipic>; + }; + }; + + pci0: pci@e0008500 { + interrupt-map-mask = <0xf800 0x0 0x0 0x7>; + interrupt-map = < + + /* IDSEL 0x11 */ + 0x8800 0x0 0x0 0x1 &ipic 20 0x8 + 0x8800 0x0 0x0 0x2 &ipic 21 0x8 + 0x8800 0x0 0x0 0x3 &ipic 22 0x8 + 0x8800 0x0 0x0 0x4 &ipic 23 0x8 + + /* IDSEL 0x12 */ + 0x9000 0x0 0x0 0x1 &ipic 22 0x8 + 0x9000 0x0 0x0 0x2 &ipic 23 0x8 + 0x9000 0x0 0x0 0x3 &ipic 20 0x8 + 0x9000 0x0 0x0 0x4 &ipic 21 0x8 + + /* IDSEL 0x13 */ + 0x9800 0x0 0x0 0x1 &ipic 23 0x8 + 0x9800 0x0 0x0 0x2 &ipic 20 0x8 + 0x9800 0x0 0x0 0x3 &ipic 21 0x8 + 0x9800 0x0 0x0 0x4 &ipic 22 0x8 + + /* IDSEL 0x15 */ + 0xa800 0x0 0x0 0x1 &ipic 20 0x8 + 0xa800 0x0 0x0 0x2 &ipic 21 0x8 + 0xa800 0x0 0x0 0x3 &ipic 22 0x8 + 0xa800 0x0 0x0 0x4 &ipic 23 0x8 + + /* IDSEL 0x16 */ + 0xb000 0x0 0x0 0x1 &ipic 23 0x8 + 0xb000 0x0 0x0 0x2 &ipic 20 0x8 + 0xb000 0x0 0x0 0x3 &ipic 21 0x8 + 0xb000 0x0 0x0 0x4 &ipic 22 0x8 + + /* IDSEL 0x17 */ + 0xb800 0x0 0x0 0x1 &ipic 22 0x8 + 0xb800 0x0 0x0 0x2 &ipic 23 0x8 + 0xb800 0x0 0x0 0x3 &ipic 20 0x8 + 0xb800 0x0 0x0 0x4 &ipic 21 0x8 + + /* IDSEL 0x18 */ + 0xc000 0x0 0x0 0x1 &ipic 21 0x8 + 0xc000 0x0 0x0 0x2 &ipic 22 0x8 + 0xc000 0x0 0x0 0x3 &ipic 23 0x8 + 0xc000 0x0 0x0 0x4 &ipic 20 0x8>; + interrupt-parent = <&ipic>; + interrupts = <66 0x8>; + bus-range = <0x0 0x0>; + ranges = <0x02000000 0x0 0x90000000 0x90000000 0x0 0x10000000 + 0x42000000 0x0 0x80000000 0x80000000 0x0 0x10000000 + 0x01000000 0x0 0x00000000 0xe0300000 0x0 0x00100000>; + clock-frequency = <0>; + sleep = <&pmc 0x00010000>; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + reg = <0xe0008500 0x100 /* internal registers */ + 0xe0008300 0x8>; /* config space access registers */ + compatible = "fsl,mpc8349-pci"; + device_type = "pci"; + }; + + pci1: pcie@e0009000 { + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + device_type = "pci"; + compatible = "fsl,mpc8378-pcie", "fsl,mpc8314-pcie"; + reg = <0xe0009000 0x00001000>; + ranges = <0x02000000 0 0xa8000000 0xa8000000 0 0x10000000 + 0x01000000 0 0x00000000 0xb8000000 0 0x00800000>; + bus-range = <0 255>; + interrupt-map-mask = <0xf800 0 0 7>; + interrupt-map = <0 0 0 1 &ipic 1 8 + 0 0 0 2 &ipic 1 8 + 0 0 0 3 &ipic 1 8 + 0 0 0 4 &ipic 1 8>; + sleep = <&pmc 0x00300000>; + clock-frequency = <0>; + + pcie@0 { + #address-cells = <3>; + #size-cells = <2>; + device_type = "pci"; + reg = <0 0 0 0 0>; + ranges = <0x02000000 0 0xa8000000 + 0x02000000 0 0xa8000000 + 0 0x10000000 + 0x01000000 0 0x00000000 + 0x01000000 0 0x00000000 + 0 0x00800000>; + }; + }; + + pci2: pcie@e000a000 { + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + device_type = "pci"; + compatible = "fsl,mpc8378-pcie", "fsl,mpc8314-pcie"; + reg = <0xe000a000 0x00001000>; + ranges = <0x02000000 0 0xc8000000 0xc8000000 0 0x10000000 + 0x01000000 0 0x00000000 0xd8000000 0 0x00800000>; + bus-range = <0 255>; + interrupt-map-mask = <0xf800 0 0 7>; + interrupt-map = <0 0 0 1 &ipic 2 8 + 0 0 0 2 &ipic 2 8 + 0 0 0 3 &ipic 2 8 + 0 0 0 4 &ipic 2 8>; + sleep = <&pmc 0x000c0000>; + clock-frequency = <0>; + + pcie@0 { + #address-cells = <3>; + #size-cells = <2>; + device_type = "pci"; + reg = <0 0 0 0 0>; + ranges = <0x02000000 0 0xc8000000 + 0x02000000 0 0xc8000000 + 0 0x10000000 + 0x01000000 0 0x00000000 + 0x01000000 0 0x00000000 + 0 0x00800000>; + }; + }; +}; diff --git a/arch/powerpc/boot/dts/mpc8378_rdb.dts b/arch/powerpc/boot/dts/mpc8378_rdb.dts new file mode 100644 index 000000000..74b6a535a --- /dev/null +++ b/arch/powerpc/boot/dts/mpc8378_rdb.dts @@ -0,0 +1,486 @@ +/* + * MPC8378E RDB Device Tree Source + * + * Copyright 2007, 2008 Freescale Semiconductor Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +/dts-v1/; + +/ { + compatible = "fsl,mpc8378rdb"; + #address-cells = <1>; + #size-cells = <1>; + + aliases { + ethernet0 = &enet0; + ethernet1 = &enet1; + serial0 = &serial0; + serial1 = &serial1; + pci0 = &pci0; + pci1 = &pci1; + pci2 = &pci2; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + PowerPC,8378@0 { + device_type = "cpu"; + reg = <0x0>; + d-cache-line-size = <32>; + i-cache-line-size = <32>; + d-cache-size = <32768>; + i-cache-size = <32768>; + timebase-frequency = <0>; + bus-frequency = <0>; + clock-frequency = <0>; + }; + }; + + memory { + device_type = "memory"; + reg = <0x00000000 0x10000000>; // 256MB at 0 + }; + + localbus@e0005000 { + #address-cells = <2>; + #size-cells = <1>; + compatible = "fsl,mpc8378-elbc", "fsl,elbc", "simple-bus"; + reg = <0xe0005000 0x1000>; + interrupts = <77 0x8>; + interrupt-parent = <&ipic>; + + // CS0 and CS1 are swapped when + // booting from nand, but the + // addresses are the same. + ranges = <0x0 0x0 0xfe000000 0x00800000 + 0x1 0x0 0xe0600000 0x00008000 + 0x2 0x0 0xf0000000 0x00020000 + 0x3 0x0 0xfa000000 0x00008000>; + + flash@0,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "cfi-flash"; + reg = <0x0 0x0 0x800000>; + bank-width = <2>; + device-width = <1>; + }; + + nand@1,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,mpc8378-fcm-nand", + "fsl,elbc-fcm-nand"; + reg = <0x1 0x0 0x8000>; + + u-boot@0 { + reg = <0x0 0x100000>; + read-only; + }; + + kernel@100000 { + reg = <0x100000 0x300000>; + }; + fs@400000 { + reg = <0x400000 0x1c00000>; + }; + }; + }; + + immr@e0000000 { + #address-cells = <1>; + #size-cells = <1>; + device_type = "soc"; + compatible = "simple-bus"; + ranges = <0x0 0xe0000000 0x00100000>; + reg = <0xe0000000 0x00000200>; + bus-frequency = <0>; + + wdt@200 { + device_type = "watchdog"; + compatible = "mpc83xx_wdt"; + reg = <0x200 0x100>; + }; + + gpio1: gpio-controller@c00 { + #gpio-cells = <2>; + compatible = "fsl,mpc8378-gpio", "fsl,mpc8349-gpio"; + reg = <0xc00 0x100>; + interrupts = <74 0x8>; + interrupt-parent = <&ipic>; + gpio-controller; + }; + + gpio2: gpio-controller@d00 { + #gpio-cells = <2>; + compatible = "fsl,mpc8378-gpio", "fsl,mpc8349-gpio"; + reg = <0xd00 0x100>; + interrupts = <75 0x8>; + interrupt-parent = <&ipic>; + gpio-controller; + }; + + sleep-nexus { + #address-cells = <1>; + #size-cells = <1>; + compatible = "simple-bus"; + sleep = <&pmc 0x0c000000>; + ranges; + + i2c@3000 { + #address-cells = <1>; + #size-cells = <0>; + cell-index = <0>; + compatible = "fsl-i2c"; + reg = <0x3000 0x100>; + interrupts = <14 0x8>; + interrupt-parent = <&ipic>; + dfsrr; + + dtt@48 { + compatible = "national,lm75"; + reg = <0x48>; + }; + + at24@50 { + compatible = "at24,24c256"; + reg = <0x50>; + }; + + rtc@68 { + compatible = "dallas,ds1339"; + reg = <0x68>; + }; + + mcu_pio: mcu@a { + #gpio-cells = <2>; + compatible = "fsl,mc9s08qg8-mpc8378erdb", + "fsl,mcu-mpc8349emitx"; + reg = <0x0a>; + gpio-controller; + }; + }; + + sdhci@2e000 { + compatible = "fsl,mpc8378-esdhc", "fsl,esdhc"; + reg = <0x2e000 0x1000>; + interrupts = <42 0x8>; + interrupt-parent = <&ipic>; + sdhci,wp-inverted; + /* Filled in by U-Boot */ + clock-frequency = <111111111>; + }; + }; + + i2c@3100 { + #address-cells = <1>; + #size-cells = <0>; + cell-index = <1>; + compatible = "fsl-i2c"; + reg = <0x3100 0x100>; + interrupts = <15 0x8>; + interrupt-parent = <&ipic>; + dfsrr; + }; + + spi@7000 { + cell-index = <0>; + compatible = "fsl,spi"; + reg = <0x7000 0x1000>; + interrupts = <16 0x8>; + interrupt-parent = <&ipic>; + mode = "cpu"; + }; + + dma@82a8 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,mpc8378-dma", "fsl,elo-dma"; + reg = <0x82a8 4>; + ranges = <0 0x8100 0x1a8>; + interrupt-parent = <&ipic>; + interrupts = <71 8>; + cell-index = <0>; + dma-channel@0 { + compatible = "fsl,mpc8378-dma-channel", "fsl,elo-dma-channel"; + reg = <0 0x80>; + cell-index = <0>; + interrupt-parent = <&ipic>; + interrupts = <71 8>; + }; + dma-channel@80 { + compatible = "fsl,mpc8378-dma-channel", "fsl,elo-dma-channel"; + reg = <0x80 0x80>; + cell-index = <1>; + interrupt-parent = <&ipic>; + interrupts = <71 8>; + }; + dma-channel@100 { + compatible = "fsl,mpc8378-dma-channel", "fsl,elo-dma-channel"; + reg = <0x100 0x80>; + cell-index = <2>; + interrupt-parent = <&ipic>; + interrupts = <71 8>; + }; + dma-channel@180 { + compatible = "fsl,mpc8378-dma-channel", "fsl,elo-dma-channel"; + reg = <0x180 0x28>; + cell-index = <3>; + interrupt-parent = <&ipic>; + interrupts = <71 8>; + }; + }; + + usb@23000 { + compatible = "fsl-usb2-dr"; + reg = <0x23000 0x1000>; + #address-cells = <1>; + #size-cells = <0>; + interrupt-parent = <&ipic>; + interrupts = <38 0x8>; + phy_type = "ulpi"; + sleep = <&pmc 0x00c00000>; + }; + + enet0: ethernet@24000 { + #address-cells = <1>; + #size-cells = <1>; + cell-index = <0>; + device_type = "network"; + model = "eTSEC"; + compatible = "gianfar"; + reg = <0x24000 0x1000>; + ranges = <0x0 0x24000 0x1000>; + local-mac-address = [ 00 00 00 00 00 00 ]; + interrupts = <32 0x8 33 0x8 34 0x8>; + phy-connection-type = "mii"; + interrupt-parent = <&ipic>; + tbi-handle = <&tbi0>; + phy-handle = <&phy2>; + sleep = <&pmc 0xc0000000>; + fsl,magic-packet; + + mdio@520 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,gianfar-mdio"; + reg = <0x520 0x20>; + + phy2: ethernet-phy@2 { + interrupt-parent = <&ipic>; + interrupts = <17 0x8>; + reg = <0x2>; + }; + + tbi0: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + }; + + enet1: ethernet@25000 { + #address-cells = <1>; + #size-cells = <1>; + cell-index = <1>; + device_type = "network"; + model = "eTSEC"; + compatible = "gianfar"; + reg = <0x25000 0x1000>; + ranges = <0x0 0x25000 0x1000>; + local-mac-address = [ 00 00 00 00 00 00 ]; + interrupts = <35 0x8 36 0x8 37 0x8>; + phy-connection-type = "mii"; + interrupt-parent = <&ipic>; + fixed-link = <1 1 1000 0 0>; + tbi-handle = <&tbi1>; + sleep = <&pmc 0x30000000>; + fsl,magic-packet; + + mdio@520 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,gianfar-tbi"; + reg = <0x520 0x20>; + + tbi1: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + }; + + serial0: serial@4500 { + cell-index = <0>; + device_type = "serial"; + compatible = "fsl,ns16550", "ns16550"; + reg = <0x4500 0x100>; + clock-frequency = <0>; + interrupts = <9 0x8>; + interrupt-parent = <&ipic>; + }; + + serial1: serial@4600 { + cell-index = <1>; + device_type = "serial"; + compatible = "fsl,ns16550", "ns16550"; + reg = <0x4600 0x100>; + clock-frequency = <0>; + interrupts = <10 0x8>; + interrupt-parent = <&ipic>; + }; + + crypto@30000 { + compatible = "fsl,sec3.0", "fsl,sec2.4", "fsl,sec2.2", + "fsl,sec2.1", "fsl,sec2.0"; + reg = <0x30000 0x10000>; + interrupts = <11 0x8>; + interrupt-parent = <&ipic>; + fsl,num-channels = <4>; + fsl,channel-fifo-len = <24>; + fsl,exec-units-mask = <0x9fe>; + fsl,descriptor-types-mask = <0x3ab0ebf>; + sleep = <&pmc 0x03000000>; + }; + + /* IPIC + * interrupts cell = <intr #, sense> + * sense values match linux IORESOURCE_IRQ_* defines: + * sense == 8: Level, low assertion + * sense == 2: Edge, high-to-low change + */ + ipic: interrupt-controller@700 { + compatible = "fsl,ipic"; + interrupt-controller; + #address-cells = <0>; + #interrupt-cells = <2>; + reg = <0x700 0x100>; + }; + + pmc: power@b00 { + compatible = "fsl,mpc8378-pmc", "fsl,mpc8349-pmc"; + reg = <0xb00 0x100 0xa00 0x100>; + interrupts = <80 0x8>; + interrupt-parent = <&ipic>; + }; + }; + + pci0: pci@e0008500 { + interrupt-map-mask = <0xf800 0 0 7>; + interrupt-map = < + /* IRQ5 = 21 = 0x15, IRQ6 = 0x16, IRQ7 = 23 = 0x17 */ + + /* IDSEL AD14 IRQ6 inta */ + 0x7000 0x0 0x0 0x1 &ipic 22 0x8 + + /* IDSEL AD15 IRQ5 inta, IRQ6 intb, IRQ7 intd */ + 0x7800 0x0 0x0 0x1 &ipic 21 0x8 + 0x7800 0x0 0x0 0x2 &ipic 22 0x8 + 0x7800 0x0 0x0 0x4 &ipic 23 0x8 + + /* IDSEL AD28 IRQ7 inta, IRQ5 intb IRQ6 intc*/ + 0xE000 0x0 0x0 0x1 &ipic 23 0x8 + 0xE000 0x0 0x0 0x2 &ipic 21 0x8 + 0xE000 0x0 0x0 0x3 &ipic 22 0x8>; + interrupt-parent = <&ipic>; + interrupts = <66 0x8>; + bus-range = <0 0>; + ranges = <0x02000000 0x0 0x90000000 0x90000000 0x0 0x10000000 + 0x42000000 0x0 0x80000000 0x80000000 0x0 0x10000000 + 0x01000000 0x0 0x00000000 0xe0300000 0x0 0x00100000>; + sleep = <&pmc 0x00010000>; + clock-frequency = <66666666>; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + reg = <0xe0008500 0x100 /* internal registers */ + 0xe0008300 0x8>; /* config space access registers */ + compatible = "fsl,mpc8349-pci"; + device_type = "pci"; + }; + + pci1: pcie@e0009000 { + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + device_type = "pci"; + compatible = "fsl,mpc8378-pcie", "fsl,mpc8314-pcie"; + reg = <0xe0009000 0x00001000>; + ranges = <0x02000000 0 0xa8000000 0xa8000000 0 0x10000000 + 0x01000000 0 0x00000000 0xb8000000 0 0x00800000>; + bus-range = <0 255>; + interrupt-map-mask = <0xf800 0 0 7>; + interrupt-map = <0 0 0 1 &ipic 1 8 + 0 0 0 2 &ipic 1 8 + 0 0 0 3 &ipic 1 8 + 0 0 0 4 &ipic 1 8>; + sleep = <&pmc 0x00300000>; + clock-frequency = <0>; + + pcie@0 { + #address-cells = <3>; + #size-cells = <2>; + device_type = "pci"; + reg = <0 0 0 0 0>; + ranges = <0x02000000 0 0xa8000000 + 0x02000000 0 0xa8000000 + 0 0x10000000 + 0x01000000 0 0x00000000 + 0x01000000 0 0x00000000 + 0 0x00800000>; + }; + }; + + pci2: pcie@e000a000 { + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + device_type = "pci"; + compatible = "fsl,mpc8378-pcie", "fsl,mpc8314-pcie"; + reg = <0xe000a000 0x00001000>; + ranges = <0x02000000 0 0xc8000000 0xc8000000 0 0x10000000 + 0x01000000 0 0x00000000 0xd8000000 0 0x00800000>; + bus-range = <0 255>; + interrupt-map-mask = <0xf800 0 0 7>; + interrupt-map = <0 0 0 1 &ipic 2 8 + 0 0 0 2 &ipic 2 8 + 0 0 0 3 &ipic 2 8 + 0 0 0 4 &ipic 2 8>; + sleep = <&pmc 0x000c0000>; + clock-frequency = <0>; + + pcie@0 { + #address-cells = <3>; + #size-cells = <2>; + device_type = "pci"; + reg = <0 0 0 0 0>; + ranges = <0x02000000 0 0xc8000000 + 0x02000000 0 0xc8000000 + 0 0x10000000 + 0x01000000 0 0x00000000 + 0x01000000 0 0x00000000 + 0 0x00800000>; + }; + }; + + leds { + compatible = "gpio-leds"; + + pwr { + gpios = <&mcu_pio 0 0>; + default-state = "on"; + }; + + hdd { + gpios = <&mcu_pio 1 0>; + linux,default-trigger = "ide-disk"; + }; + }; +}; diff --git a/arch/powerpc/boot/dts/mpc8379_mds.dts b/arch/powerpc/boot/dts/mpc8379_mds.dts new file mode 100644 index 000000000..38e5048d6 --- /dev/null +++ b/arch/powerpc/boot/dts/mpc8379_mds.dts @@ -0,0 +1,459 @@ +/* + * MPC8379E MDS Device Tree Source + * + * Copyright 2007 Freescale Semiconductor Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +/dts-v1/; + +/ { + model = "fsl,mpc8379emds"; + compatible = "fsl,mpc8379emds","fsl,mpc837xmds"; + #address-cells = <1>; + #size-cells = <1>; + + aliases { + ethernet0 = &enet0; + ethernet1 = &enet1; + serial0 = &serial0; + serial1 = &serial1; + pci0 = &pci0; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + PowerPC,8379@0 { + device_type = "cpu"; + reg = <0x0>; + d-cache-line-size = <32>; + i-cache-line-size = <32>; + d-cache-size = <32768>; + i-cache-size = <32768>; + timebase-frequency = <0>; + bus-frequency = <0>; + clock-frequency = <0>; + }; + }; + + memory { + device_type = "memory"; + reg = <0x00000000 0x20000000>; // 512MB at 0 + }; + + localbus@e0005000 { + #address-cells = <2>; + #size-cells = <1>; + compatible = "fsl,mpc8379-elbc", "fsl,elbc", "simple-bus"; + reg = <0xe0005000 0x1000>; + interrupts = <77 0x8>; + interrupt-parent = <&ipic>; + + // booting from NOR flash + ranges = <0 0x0 0xfe000000 0x02000000 + 1 0x0 0xf8000000 0x00008000 + 3 0x0 0xe0600000 0x00008000>; + + flash@0,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "cfi-flash"; + reg = <0 0x0 0x2000000>; + bank-width = <2>; + device-width = <1>; + + u-boot@0 { + reg = <0x0 0x100000>; + read-only; + }; + + fs@100000 { + reg = <0x100000 0x800000>; + }; + + kernel@1d00000 { + reg = <0x1d00000 0x200000>; + }; + + dtb@1f00000 { + reg = <0x1f00000 0x100000>; + }; + }; + + bcsr@1,0 { + reg = <1 0x0 0x8000>; + compatible = "fsl,mpc837xmds-bcsr"; + }; + + nand@3,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,mpc8379-fcm-nand", + "fsl,elbc-fcm-nand"; + reg = <3 0x0 0x8000>; + + u-boot@0 { + reg = <0x0 0x100000>; + read-only; + }; + + kernel@100000 { + reg = <0x100000 0x300000>; + }; + + fs@400000 { + reg = <0x400000 0x1c00000>; + }; + }; + }; + + soc@e0000000 { + #address-cells = <1>; + #size-cells = <1>; + device_type = "soc"; + compatible = "simple-bus"; + ranges = <0x0 0xe0000000 0x00100000>; + reg = <0xe0000000 0x00000200>; + bus-frequency = <0>; + + wdt@200 { + compatible = "mpc83xx_wdt"; + reg = <0x200 0x100>; + }; + + sleep-nexus { + #address-cells = <1>; + #size-cells = <1>; + compatible = "simple-bus"; + sleep = <&pmc 0x0c000000>; + ranges; + + i2c@3000 { + #address-cells = <1>; + #size-cells = <0>; + cell-index = <0>; + compatible = "fsl-i2c"; + reg = <0x3000 0x100>; + interrupts = <14 0x8>; + interrupt-parent = <&ipic>; + dfsrr; + + rtc@68 { + compatible = "dallas,ds1374"; + reg = <0x68>; + interrupts = <19 0x8>; + interrupt-parent = <&ipic>; + }; + }; + + sdhci@2e000 { + compatible = "fsl,mpc8379-esdhc", "fsl,esdhc"; + reg = <0x2e000 0x1000>; + interrupts = <42 0x8>; + interrupt-parent = <&ipic>; + sdhci,wp-inverted; + /* Filled in by U-Boot */ + clock-frequency = <0>; + }; + }; + + i2c@3100 { + #address-cells = <1>; + #size-cells = <0>; + cell-index = <1>; + compatible = "fsl-i2c"; + reg = <0x3100 0x100>; + interrupts = <15 0x8>; + interrupt-parent = <&ipic>; + dfsrr; + }; + + spi@7000 { + cell-index = <0>; + compatible = "fsl,spi"; + reg = <0x7000 0x1000>; + interrupts = <16 0x8>; + interrupt-parent = <&ipic>; + mode = "cpu"; + }; + + dma@82a8 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,mpc8379-dma", "fsl,elo-dma"; + reg = <0x82a8 4>; + ranges = <0 0x8100 0x1a8>; + interrupt-parent = <&ipic>; + interrupts = <71 8>; + cell-index = <0>; + dma-channel@0 { + compatible = "fsl,mpc8379-dma-channel", "fsl,elo-dma-channel"; + reg = <0 0x80>; + cell-index = <0>; + interrupt-parent = <&ipic>; + interrupts = <71 8>; + }; + dma-channel@80 { + compatible = "fsl,mpc8379-dma-channel", "fsl,elo-dma-channel"; + reg = <0x80 0x80>; + cell-index = <1>; + interrupt-parent = <&ipic>; + interrupts = <71 8>; + }; + dma-channel@100 { + compatible = "fsl,mpc8379-dma-channel", "fsl,elo-dma-channel"; + reg = <0x100 0x80>; + cell-index = <2>; + interrupt-parent = <&ipic>; + interrupts = <71 8>; + }; + dma-channel@180 { + compatible = "fsl,mpc8379-dma-channel", "fsl,elo-dma-channel"; + reg = <0x180 0x28>; + cell-index = <3>; + interrupt-parent = <&ipic>; + interrupts = <71 8>; + }; + }; + + usb@23000 { + compatible = "fsl-usb2-dr"; + reg = <0x23000 0x1000>; + #address-cells = <1>; + #size-cells = <0>; + interrupt-parent = <&ipic>; + interrupts = <38 0x8>; + dr_mode = "host"; + phy_type = "ulpi"; + sleep = <&pmc 0x00c00000>; + }; + + enet0: ethernet@24000 { + #address-cells = <1>; + #size-cells = <1>; + cell-index = <0>; + device_type = "network"; + model = "eTSEC"; + compatible = "gianfar"; + reg = <0x24000 0x1000>; + ranges = <0x0 0x24000 0x1000>; + local-mac-address = [ 00 00 00 00 00 00 ]; + interrupts = <32 0x8 33 0x8 34 0x8>; + phy-connection-type = "mii"; + interrupt-parent = <&ipic>; + tbi-handle = <&tbi0>; + phy-handle = <&phy2>; + sleep = <&pmc 0xc0000000>; + fsl,magic-packet; + + mdio@520 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,gianfar-mdio"; + reg = <0x520 0x20>; + + phy2: ethernet-phy@2 { + interrupt-parent = <&ipic>; + interrupts = <17 0x8>; + reg = <0x2>; + }; + + phy3: ethernet-phy@3 { + interrupt-parent = <&ipic>; + interrupts = <18 0x8>; + reg = <0x3>; + }; + + tbi0: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + }; + + enet1: ethernet@25000 { + #address-cells = <1>; + #size-cells = <1>; + cell-index = <1>; + device_type = "network"; + model = "eTSEC"; + compatible = "gianfar"; + reg = <0x25000 0x1000>; + ranges = <0x0 0x25000 0x1000>; + local-mac-address = [ 00 00 00 00 00 00 ]; + interrupts = <35 0x8 36 0x8 37 0x8>; + phy-connection-type = "mii"; + interrupt-parent = <&ipic>; + tbi-handle = <&tbi1>; + phy-handle = <&phy3>; + sleep = <&pmc 0x30000000>; + fsl,magic-packet; + + mdio@520 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,gianfar-tbi"; + reg = <0x520 0x20>; + + tbi1: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + }; + + serial0: serial@4500 { + cell-index = <0>; + device_type = "serial"; + compatible = "fsl,ns16550", "ns16550"; + reg = <0x4500 0x100>; + clock-frequency = <0>; + interrupts = <9 0x8>; + interrupt-parent = <&ipic>; + }; + + serial1: serial@4600 { + cell-index = <1>; + device_type = "serial"; + compatible = "fsl,ns16550", "ns16550"; + reg = <0x4600 0x100>; + clock-frequency = <0>; + interrupts = <10 0x8>; + interrupt-parent = <&ipic>; + }; + + crypto@30000 { + compatible = "fsl,sec3.0", "fsl,sec2.4", "fsl,sec2.2", + "fsl,sec2.1", "fsl,sec2.0"; + reg = <0x30000 0x10000>; + interrupts = <11 0x8>; + interrupt-parent = <&ipic>; + fsl,num-channels = <4>; + fsl,channel-fifo-len = <24>; + fsl,exec-units-mask = <0x9fe>; + fsl,descriptor-types-mask = <0x3ab0ebf>; + sleep = <&pmc 0x03000000>; + }; + + sata@18000 { + compatible = "fsl,mpc8379-sata", "fsl,pq-sata"; + reg = <0x18000 0x1000>; + interrupts = <44 0x8>; + interrupt-parent = <&ipic>; + sleep = <&pmc 0x000000c0>; + }; + + sata@19000 { + compatible = "fsl,mpc8379-sata", "fsl,pq-sata"; + reg = <0x19000 0x1000>; + interrupts = <45 0x8>; + interrupt-parent = <&ipic>; + sleep = <&pmc 0x00000030>; + }; + + sata@1a000 { + compatible = "fsl,mpc8379-sata", "fsl,pq-sata"; + reg = <0x1a000 0x1000>; + interrupts = <46 0x8>; + interrupt-parent = <&ipic>; + sleep = <&pmc 0x0000000c>; + }; + + sata@1b000 { + compatible = "fsl,mpc8379-sata", "fsl,pq-sata"; + reg = <0x1b000 0x1000>; + interrupts = <47 0x8>; + interrupt-parent = <&ipic>; + sleep = <&pmc 0x00000003>; + }; + + /* IPIC + * interrupts cell = <intr #, sense> + * sense values match linux IORESOURCE_IRQ_* defines: + * sense == 8: Level, low assertion + * sense == 2: Edge, high-to-low change + */ + ipic: pic@700 { + compatible = "fsl,ipic"; + interrupt-controller; + #address-cells = <0>; + #interrupt-cells = <2>; + reg = <0x700 0x100>; + }; + + pmc: power@b00 { + compatible = "fsl,mpc8379-pmc", "fsl,mpc8349-pmc"; + reg = <0xb00 0x100 0xa00 0x100>; + interrupts = <80 0x8>; + interrupt-parent = <&ipic>; + }; + }; + + pci0: pci@e0008500 { + interrupt-map-mask = <0xf800 0x0 0x0 0x7>; + interrupt-map = < + + /* IDSEL 0x11 */ + 0x8800 0x0 0x0 0x1 &ipic 20 0x8 + 0x8800 0x0 0x0 0x2 &ipic 21 0x8 + 0x8800 0x0 0x0 0x3 &ipic 22 0x8 + 0x8800 0x0 0x0 0x4 &ipic 23 0x8 + + /* IDSEL 0x12 */ + 0x9000 0x0 0x0 0x1 &ipic 22 0x8 + 0x9000 0x0 0x0 0x2 &ipic 23 0x8 + 0x9000 0x0 0x0 0x3 &ipic 20 0x8 + 0x9000 0x0 0x0 0x4 &ipic 21 0x8 + + /* IDSEL 0x13 */ + 0x9800 0x0 0x0 0x1 &ipic 23 0x8 + 0x9800 0x0 0x0 0x2 &ipic 20 0x8 + 0x9800 0x0 0x0 0x3 &ipic 21 0x8 + 0x9800 0x0 0x0 0x4 &ipic 22 0x8 + + /* IDSEL 0x15 */ + 0xa800 0x0 0x0 0x1 &ipic 20 0x8 + 0xa800 0x0 0x0 0x2 &ipic 21 0x8 + 0xa800 0x0 0x0 0x3 &ipic 22 0x8 + 0xa800 0x0 0x0 0x4 &ipic 23 0x8 + + /* IDSEL 0x16 */ + 0xb000 0x0 0x0 0x1 &ipic 23 0x8 + 0xb000 0x0 0x0 0x2 &ipic 20 0x8 + 0xb000 0x0 0x0 0x3 &ipic 21 0x8 + 0xb000 0x0 0x0 0x4 &ipic 22 0x8 + + /* IDSEL 0x17 */ + 0xb800 0x0 0x0 0x1 &ipic 22 0x8 + 0xb800 0x0 0x0 0x2 &ipic 23 0x8 + 0xb800 0x0 0x0 0x3 &ipic 20 0x8 + 0xb800 0x0 0x0 0x4 &ipic 21 0x8 + + /* IDSEL 0x18 */ + 0xc000 0x0 0x0 0x1 &ipic 21 0x8 + 0xc000 0x0 0x0 0x2 &ipic 22 0x8 + 0xc000 0x0 0x0 0x3 &ipic 23 0x8 + 0xc000 0x0 0x0 0x4 &ipic 20 0x8>; + interrupt-parent = <&ipic>; + interrupts = <66 0x8>; + bus-range = <0x0 0x0>; + ranges = <0x02000000 0x0 0x90000000 0x90000000 0x0 0x10000000 + 0x42000000 0x0 0x80000000 0x80000000 0x0 0x10000000 + 0x01000000 0x0 0x00000000 0xe0300000 0x0 0x00100000>; + sleep = <&pmc 0x00010000>; + clock-frequency = <0>; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + reg = <0xe0008500 0x100 /* internal registers */ + 0xe0008300 0x8>; /* config space access registers */ + compatible = "fsl,mpc8349-pci"; + device_type = "pci"; + }; +}; diff --git a/arch/powerpc/boot/dts/mpc8379_rdb.dts b/arch/powerpc/boot/dts/mpc8379_rdb.dts new file mode 100644 index 000000000..3b5cbac85 --- /dev/null +++ b/arch/powerpc/boot/dts/mpc8379_rdb.dts @@ -0,0 +1,452 @@ +/* + * MPC8379E RDB Device Tree Source + * + * Copyright 2007, 2008 Freescale Semiconductor Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +/dts-v1/; + +/ { + compatible = "fsl,mpc8379rdb"; + #address-cells = <1>; + #size-cells = <1>; + + aliases { + ethernet0 = &enet0; + ethernet1 = &enet1; + serial0 = &serial0; + serial1 = &serial1; + pci0 = &pci0; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + PowerPC,8379@0 { + device_type = "cpu"; + reg = <0x0>; + d-cache-line-size = <32>; + i-cache-line-size = <32>; + d-cache-size = <32768>; + i-cache-size = <32768>; + timebase-frequency = <0>; + bus-frequency = <0>; + clock-frequency = <0>; + }; + }; + + memory { + device_type = "memory"; + reg = <0x00000000 0x10000000>; // 256MB at 0 + }; + + localbus@e0005000 { + #address-cells = <2>; + #size-cells = <1>; + compatible = "fsl,mpc8379-elbc", "fsl,elbc", "simple-bus"; + reg = <0xe0005000 0x1000>; + interrupts = <77 0x8>; + interrupt-parent = <&ipic>; + + // CS0 and CS1 are swapped when + // booting from nand, but the + // addresses are the same. + ranges = <0x0 0x0 0xfe000000 0x00800000 + 0x1 0x0 0xe0600000 0x00008000 + 0x2 0x0 0xf0000000 0x00020000 + 0x3 0x0 0xfa000000 0x00008000>; + + flash@0,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "cfi-flash"; + reg = <0x0 0x0 0x800000>; + bank-width = <2>; + device-width = <1>; + }; + + nand@1,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,mpc8379-fcm-nand", + "fsl,elbc-fcm-nand"; + reg = <0x1 0x0 0x8000>; + + u-boot@0 { + reg = <0x0 0x100000>; + read-only; + }; + + kernel@100000 { + reg = <0x100000 0x300000>; + }; + fs@400000 { + reg = <0x400000 0x1c00000>; + }; + }; + }; + + immr@e0000000 { + #address-cells = <1>; + #size-cells = <1>; + device_type = "soc"; + compatible = "simple-bus"; + ranges = <0x0 0xe0000000 0x00100000>; + reg = <0xe0000000 0x00000200>; + bus-frequency = <0>; + + wdt@200 { + device_type = "watchdog"; + compatible = "mpc83xx_wdt"; + reg = <0x200 0x100>; + }; + + gpio1: gpio-controller@c00 { + #gpio-cells = <2>; + compatible = "fsl,mpc8379-gpio", "fsl,mpc8349-gpio"; + reg = <0xc00 0x100>; + interrupts = <74 0x8>; + interrupt-parent = <&ipic>; + gpio-controller; + }; + + gpio2: gpio-controller@d00 { + #gpio-cells = <2>; + compatible = "fsl,mpc8379-gpio", "fsl,mpc8349-gpio"; + reg = <0xd00 0x100>; + interrupts = <75 0x8>; + interrupt-parent = <&ipic>; + gpio-controller; + }; + + sleep-nexus { + #address-cells = <1>; + #size-cells = <1>; + compatible = "simple-bus"; + sleep = <&pmc 0x0c000000>; + ranges; + + i2c@3000 { + #address-cells = <1>; + #size-cells = <0>; + cell-index = <0>; + compatible = "fsl-i2c"; + reg = <0x3000 0x100>; + interrupts = <14 0x8>; + interrupt-parent = <&ipic>; + dfsrr; + + dtt@48 { + compatible = "national,lm75"; + reg = <0x48>; + }; + + at24@50 { + compatible = "at24,24c256"; + reg = <0x50>; + }; + + rtc@68 { + compatible = "dallas,ds1339"; + reg = <0x68>; + }; + + mcu_pio: mcu@a { + #gpio-cells = <2>; + compatible = "fsl,mc9s08qg8-mpc8379erdb", + "fsl,mcu-mpc8349emitx"; + reg = <0x0a>; + gpio-controller; + }; + }; + + sdhci@2e000 { + compatible = "fsl,mpc8379-esdhc", "fsl,esdhc"; + reg = <0x2e000 0x1000>; + interrupts = <42 0x8>; + interrupt-parent = <&ipic>; + sdhci,wp-inverted; + /* Filled in by U-Boot */ + clock-frequency = <111111111>; + }; + }; + + i2c@3100 { + #address-cells = <1>; + #size-cells = <0>; + cell-index = <1>; + compatible = "fsl-i2c"; + reg = <0x3100 0x100>; + interrupts = <15 0x8>; + interrupt-parent = <&ipic>; + dfsrr; + }; + + spi@7000 { + cell-index = <0>; + compatible = "fsl,spi"; + reg = <0x7000 0x1000>; + interrupts = <16 0x8>; + interrupt-parent = <&ipic>; + mode = "cpu"; + }; + + dma@82a8 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,mpc8379-dma", "fsl,elo-dma"; + reg = <0x82a8 4>; + ranges = <0 0x8100 0x1a8>; + interrupt-parent = <&ipic>; + interrupts = <71 8>; + cell-index = <0>; + dma-channel@0 { + compatible = "fsl,mpc8379-dma-channel", "fsl,elo-dma-channel"; + reg = <0 0x80>; + cell-index = <0>; + interrupt-parent = <&ipic>; + interrupts = <71 8>; + }; + dma-channel@80 { + compatible = "fsl,mpc8379-dma-channel", "fsl,elo-dma-channel"; + reg = <0x80 0x80>; + cell-index = <1>; + interrupt-parent = <&ipic>; + interrupts = <71 8>; + }; + dma-channel@100 { + compatible = "fsl,mpc8379-dma-channel", "fsl,elo-dma-channel"; + reg = <0x100 0x80>; + cell-index = <2>; + interrupt-parent = <&ipic>; + interrupts = <71 8>; + }; + dma-channel@180 { + compatible = "fsl,mpc8379-dma-channel", "fsl,elo-dma-channel"; + reg = <0x180 0x28>; + cell-index = <3>; + interrupt-parent = <&ipic>; + interrupts = <71 8>; + }; + }; + + usb@23000 { + compatible = "fsl-usb2-dr"; + reg = <0x23000 0x1000>; + #address-cells = <1>; + #size-cells = <0>; + interrupt-parent = <&ipic>; + interrupts = <38 0x8>; + phy_type = "ulpi"; + sleep = <&pmc 0x00c00000>; + }; + + enet0: ethernet@24000 { + #address-cells = <1>; + #size-cells = <1>; + cell-index = <0>; + device_type = "network"; + model = "eTSEC"; + compatible = "gianfar"; + reg = <0x24000 0x1000>; + ranges = <0x0 0x24000 0x1000>; + local-mac-address = [ 00 00 00 00 00 00 ]; + interrupts = <32 0x8 33 0x8 34 0x8>; + phy-connection-type = "mii"; + interrupt-parent = <&ipic>; + tbi-handle = <&tbi0>; + phy-handle = <&phy2>; + sleep = <&pmc 0xc0000000>; + fsl,magic-packet; + + mdio@520 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,gianfar-mdio"; + reg = <0x520 0x20>; + + phy2: ethernet-phy@2 { + interrupt-parent = <&ipic>; + interrupts = <17 0x8>; + reg = <0x2>; + }; + + tbi0: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + }; + + enet1: ethernet@25000 { + #address-cells = <1>; + #size-cells = <1>; + cell-index = <1>; + device_type = "network"; + model = "eTSEC"; + compatible = "gianfar"; + reg = <0x25000 0x1000>; + ranges = <0x0 0x25000 0x1000>; + local-mac-address = [ 00 00 00 00 00 00 ]; + interrupts = <35 0x8 36 0x8 37 0x8>; + phy-connection-type = "mii"; + interrupt-parent = <&ipic>; + fixed-link = <1 1 1000 0 0>; + tbi-handle = <&tbi1>; + sleep = <&pmc 0x30000000>; + fsl,magic-packet; + + mdio@520 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,gianfar-tbi"; + reg = <0x520 0x20>; + + tbi1: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + }; + + serial0: serial@4500 { + cell-index = <0>; + device_type = "serial"; + compatible = "fsl,ns16550", "ns16550"; + reg = <0x4500 0x100>; + clock-frequency = <0>; + interrupts = <9 0x8>; + interrupt-parent = <&ipic>; + }; + + serial1: serial@4600 { + cell-index = <1>; + device_type = "serial"; + compatible = "fsl,ns16550", "ns16550"; + reg = <0x4600 0x100>; + clock-frequency = <0>; + interrupts = <10 0x8>; + interrupt-parent = <&ipic>; + }; + + crypto@30000 { + compatible = "fsl,sec3.0", "fsl,sec2.4", "fsl,sec2.2", + "fsl,sec2.1", "fsl,sec2.0"; + reg = <0x30000 0x10000>; + interrupts = <11 0x8>; + interrupt-parent = <&ipic>; + fsl,num-channels = <4>; + fsl,channel-fifo-len = <24>; + fsl,exec-units-mask = <0x9fe>; + fsl,descriptor-types-mask = <0x3ab0ebf>; + sleep = <&pmc 0x03000000>; + }; + + sata@18000 { + compatible = "fsl,mpc8379-sata", "fsl,pq-sata"; + reg = <0x18000 0x1000>; + interrupts = <44 0x8>; + interrupt-parent = <&ipic>; + sleep = <&pmc 0x000000c0>; + }; + + sata@19000 { + compatible = "fsl,mpc8379-sata", "fsl,pq-sata"; + reg = <0x19000 0x1000>; + interrupts = <45 0x8>; + interrupt-parent = <&ipic>; + sleep = <&pmc 0x00000030>; + }; + + sata@1a000 { + compatible = "fsl,mpc8379-sata", "fsl,pq-sata"; + reg = <0x1a000 0x1000>; + interrupts = <46 0x8>; + interrupt-parent = <&ipic>; + sleep = <&pmc 0x0000000c>; + }; + + sata@1b000 { + compatible = "fsl,mpc8379-sata", "fsl,pq-sata"; + reg = <0x1b000 0x1000>; + interrupts = <47 0x8>; + interrupt-parent = <&ipic>; + sleep = <&pmc 0x00000003>; + }; + + /* IPIC + * interrupts cell = <intr #, sense> + * sense values match linux IORESOURCE_IRQ_* defines: + * sense == 8: Level, low assertion + * sense == 2: Edge, high-to-low change + */ + ipic: interrupt-controller@700 { + compatible = "fsl,ipic"; + interrupt-controller; + #address-cells = <0>; + #interrupt-cells = <2>; + reg = <0x700 0x100>; + }; + + pmc: power@b00 { + compatible = "fsl,mpc8379-pmc", "fsl,mpc8349-pmc"; + reg = <0xb00 0x100 0xa00 0x100>; + interrupts = <80 0x8>; + interrupt-parent = <&ipic>; + }; + }; + + pci0: pci@e0008500 { + interrupt-map-mask = <0xf800 0 0 7>; + interrupt-map = < + /* IRQ5 = 21 = 0x15, IRQ6 = 0x16, IRQ7 = 23 = 0x17 */ + + /* IDSEL AD14 IRQ6 inta */ + 0x7000 0x0 0x0 0x1 &ipic 22 0x8 + + /* IDSEL AD15 IRQ5 inta, IRQ6 intb, IRQ7 intd */ + 0x7800 0x0 0x0 0x1 &ipic 21 0x8 + 0x7800 0x0 0x0 0x2 &ipic 22 0x8 + 0x7800 0x0 0x0 0x4 &ipic 23 0x8 + + /* IDSEL AD28 IRQ7 inta, IRQ5 intb IRQ6 intc*/ + 0xE000 0x0 0x0 0x1 &ipic 23 0x8 + 0xE000 0x0 0x0 0x2 &ipic 21 0x8 + 0xE000 0x0 0x0 0x3 &ipic 22 0x8>; + interrupt-parent = <&ipic>; + interrupts = <66 0x8>; + bus-range = <0x0 0x0>; + ranges = <0x02000000 0x0 0x90000000 0x90000000 0x0 0x10000000 + 0x42000000 0x0 0x80000000 0x80000000 0x0 0x10000000 + 0x01000000 0x0 0x00000000 0xe0300000 0x0 0x00100000>; + sleep = <&pmc 0x00010000>; + clock-frequency = <66666666>; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + reg = <0xe0008500 0x100 /* internal registers */ + 0xe0008300 0x8>; /* config space access registers */ + compatible = "fsl,mpc8349-pci"; + device_type = "pci"; + }; + + leds { + compatible = "gpio-leds"; + + pwr { + gpios = <&mcu_pio 0 0>; + default-state = "on"; + }; + + hdd { + gpios = <&mcu_pio 1 0>; + linux,default-trigger = "ide-disk"; + }; + }; +}; diff --git a/arch/powerpc/boot/dts/mpc8536ds.dts b/arch/powerpc/boot/dts/mpc8536ds.dts new file mode 100644 index 000000000..19736222a --- /dev/null +++ b/arch/powerpc/boot/dts/mpc8536ds.dts @@ -0,0 +1,109 @@ +/* + * MPC8536 DS Device Tree Source + * + * Copyright 2008, 2011 Freescale Semiconductor, Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +/include/ "fsl/mpc8536si-pre.dtsi" + +/ { + model = "fsl,mpc8536ds"; + compatible = "fsl,mpc8536ds"; + + cpus { + #cpus = <1>; + #address-cells = <1>; + #size-cells = <0>; + + PowerPC,8536@0 { + device_type = "cpu"; + reg = <0>; + next-level-cache = <&L2>; + }; + }; + + memory { + device_type = "memory"; + reg = <0 0 0 0>; // Filled by U-Boot + }; + + lbc: localbus@ffe05000 { + reg = <0 0xffe05000 0 0x1000>; + + ranges = <0x0 0x0 0x0 0xe8000000 0x08000000 + 0x2 0x0 0x0 0xffa00000 0x00040000 + 0x3 0x0 0x0 0xffdf0000 0x00008000>; + }; + + board_soc: soc: soc@ffe00000 { + ranges = <0x0 0 0xffe00000 0x100000>; + }; + + pci0: pci@ffe08000 { + reg = <0 0xffe08000 0 0x1000>; + ranges = <0x02000000 0 0x80000000 0 0x80000000 0 0x10000000 + 0x01000000 0 0x00000000 0 0xffc00000 0 0x00010000>; + clock-frequency = <66666666>; + interrupt-map-mask = <0xf800 0x0 0x0 0x7>; + interrupt-map = < + + /* IDSEL 0x11 J17 Slot 1 */ + 0x8800 0 0 1 &mpic 1 1 0 0 + 0x8800 0 0 2 &mpic 2 1 0 0 + 0x8800 0 0 3 &mpic 3 1 0 0 + 0x8800 0 0 4 &mpic 4 1 0 0>; + }; + + pci1: pcie@ffe09000 { + reg = <0 0xffe09000 0 0x1000>; + ranges = <0x02000000 0 0x98000000 0 0x98000000 0 0x08000000 + 0x01000000 0 0x00000000 0 0xffc20000 0 0x00010000>; + pcie@0 { + ranges = <0x02000000 0 0x98000000 + 0x02000000 0 0x98000000 + 0 0x08000000 + + 0x01000000 0 0x00000000 + 0x01000000 0 0x00000000 + 0 0x00010000>; + }; + }; + + pci2: pcie@ffe0a000 { + reg = <0 0xffe0a000 0 0x1000>; + ranges = <0x02000000 0 0x90000000 0 0x90000000 0 0x08000000 + 0x01000000 0 0x00000000 0 0xffc10000 0 0x00010000>; + pcie@0 { + ranges = <0x02000000 0 0x90000000 + 0x02000000 0 0x90000000 + 0 0x08000000 + + 0x01000000 0 0x00000000 + 0x01000000 0 0x00000000 + 0 0x00010000>; + }; + }; + + pci3: pcie@ffe0b000 { + reg = <0 0xffe0b000 0 0x1000>; + ranges = <0x02000000 0 0xa0000000 0 0xa0000000 0 0x20000000 + 0x01000000 0 0x00000000 0 0xffc30000 0 0x00010000>; + pcie@0 { + ranges = <0x02000000 0 0xa0000000 + 0x02000000 0 0xa0000000 + 0 0x20000000 + + 0x01000000 0 0x00000000 + 0x01000000 0 0x00000000 + 0 0x00100000>; + }; + }; +}; + +/include/ "fsl/mpc8536si-post.dtsi" +/include/ "mpc8536ds.dtsi" diff --git a/arch/powerpc/boot/dts/mpc8536ds.dtsi b/arch/powerpc/boot/dts/mpc8536ds.dtsi new file mode 100644 index 000000000..937ad7e46 --- /dev/null +++ b/arch/powerpc/boot/dts/mpc8536ds.dtsi @@ -0,0 +1,244 @@ +/* + * MPC8536DS Device Tree Source stub (no addresses or top-level ranges) + * + * Copyright 2011 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +&lbc { + nor@0,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "cfi-flash"; + reg = <0x0 0x0 0x8000000>; + bank-width = <2>; + device-width = <1>; + + partition@0 { + reg = <0x0 0x03000000>; + label = "ramdisk-nor"; + }; + + partition@3000000 { + reg = <0x03000000 0x00e00000>; + label = "diagnostic-nor"; + read-only; + }; + + partition@3e00000 { + reg = <0x03e00000 0x00200000>; + label = "dink-nor"; + read-only; + }; + + partition@4000000 { + reg = <0x04000000 0x00400000>; + label = "kernel-nor"; + }; + + partition@4400000 { + reg = <0x04400000 0x03b00000>; + label = "fs-nor"; + }; + + partition@7f00000 { + reg = <0x07f00000 0x00080000>; + label = "dtb-nor"; + }; + + partition@7f80000 { + reg = <0x07f80000 0x00080000>; + label = "u-boot-nor"; + read-only; + }; + }; + + nand@2,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,mpc8536-fcm-nand", + "fsl,elbc-fcm-nand"; + reg = <0x2 0x0 0x40000>; + + partition@0 { + reg = <0x0 0x02000000>; + label = "u-boot-nand"; + read-only; + }; + + partition@2000000 { + reg = <0x02000000 0x10000000>; + label = "fs-nand"; + }; + + partition@12000000 { + reg = <0x12000000 0x08000000>; + label = "ramdisk-nand"; + }; + + partition@1a000000 { + reg = <0x1a000000 0x04000000>; + label = "kernel-nand"; + }; + + partition@1e000000 { + reg = <0x1e000000 0x01000000>; + label = "dtb-nand"; + }; + + partition@1f000000 { + reg = <0x1f000000 0x21000000>; + label = "empty-nand"; + }; + }; + + board-control@3,0 { + compatible = "fsl,mpc8536ds-fpga-pixis"; + reg = <0x3 0x0 0x8000>; + }; +}; + +&board_soc { + i2c@3100 { + rtc@68 { + compatible = "dallas,ds3232"; + reg = <0x68>; + interrupts = <0 0x1 0 0>; + }; + adt7461@4c { + compatible = "adi,adt7461"; + reg = <0x4c>; + }; + }; + + spi@7000 { + flash@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "spansion,s25sl12801"; + reg = <0>; + spi-max-frequency = <40000000>; + partition@u-boot { + label = "u-boot"; + reg = <0x00000000 0x00100000>; + read-only; + }; + partition@kernel { + label = "kernel"; + reg = <0x00100000 0x00500000>; + read-only; + }; + partition@dtb { + label = "dtb"; + reg = <0x00600000 0x00100000>; + read-only; + }; + partition@fs { + label = "file system"; + reg = <0x00700000 0x00900000>; + }; + }; + flash@1 { + compatible = "spansion,s25sl12801"; + reg = <1>; + spi-max-frequency = <40000000>; + }; + flash@2 { + compatible = "spansion,s25sl12801"; + reg = <2>; + spi-max-frequency = <40000000>; + }; + flash@3 { + compatible = "spansion,s25sl12801"; + reg = <3>; + spi-max-frequency = <40000000>; + }; + }; + + usb@22000 { + phy_type = "ulpi"; + }; + + usb@23000 { + phy_type = "ulpi"; + }; + + enet0: ethernet@24000 { + tbi-handle = <&tbi0>; + phy-handle = <&phy1>; + phy-connection-type = "rgmii-id"; + }; + + mdio@24520 { + phy0: ethernet-phy@0 { + interrupts = <10 0x1 0 0>; + reg = <0>; + }; + phy1: ethernet-phy@1 { + interrupts = <10 0x1 0 0>; + reg = <1>; + }; + sgmii_phy0: sgmii-phy@0 { + interrupts = <6 1 0 0>; + reg = <0x1d>; + }; + sgmii_phy1: sgmii-phy@1 { + interrupts = <6 1 0 0>; + reg = <0x1c>; + }; + tbi0: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + + enet2: ethernet@26000 { + tbi-handle = <&tbi1>; + phy-handle = <&phy0>; + phy-connection-type = "rgmii-id"; + }; + + mdio@26520 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,gianfar-tbi"; + reg = <0x26520 0x20>; + + tbi1: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + + usb@2b000 { + dr_mode = "peripheral"; + phy_type = "ulpi"; + }; +}; diff --git a/arch/powerpc/boot/dts/mpc8536ds_36b.dts b/arch/powerpc/boot/dts/mpc8536ds_36b.dts new file mode 100644 index 000000000..6c723ee10 --- /dev/null +++ b/arch/powerpc/boot/dts/mpc8536ds_36b.dts @@ -0,0 +1,109 @@ +/* + * MPC8536DS Device Tree Source (36-bit address map) + * + * Copyright 2008-2009, 2011 Freescale Semiconductor, Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +/include/ "fsl/mpc8536si-pre.dtsi" + +/ { + model = "fsl,mpc8536ds"; + compatible = "fsl,mpc8536ds"; + + cpus { + #cpus = <1>; + #address-cells = <1>; + #size-cells = <0>; + + PowerPC,8536@0 { + device_type = "cpu"; + reg = <0>; + next-level-cache = <&L2>; + }; + }; + + memory { + device_type = "memory"; + reg = <0 0 0 0>; // Filled by U-Boot + }; + + lbc: localbus@fffe05000 { + reg = <0xf 0xffe05000 0 0x1000>; + + ranges = <0x0 0x0 0xf 0xe8000000 0x08000000 + 0x2 0x0 0xf 0xffa00000 0x00040000 + 0x3 0x0 0xf 0xffdf0000 0x00008000>; + }; + + board_soc: soc: soc@fffe00000 { + ranges = <0x0 0xf 0xffe00000 0x100000>; + }; + + pci0: pci@fffe08000 { + reg = <0xf 0xffe08000 0 0x1000>; + ranges = <0x02000000 0 0xf0000000 0xc 0x00000000 0 0x10000000 + 0x01000000 0 0x00000000 0xf 0xffc00000 0 0x00010000>; + clock-frequency = <66666666>; + interrupt-map-mask = <0xf800 0x0 0x0 0x7>; + interrupt-map = < + + /* IDSEL 0x11 J17 Slot 1 */ + 0x8800 0 0 1 &mpic 1 1 0 0 + 0x8800 0 0 2 &mpic 2 1 0 0 + 0x8800 0 0 3 &mpic 3 1 0 0 + 0x8800 0 0 4 &mpic 4 1 0 0>; + }; + + pci1: pcie@fffe09000 { + reg = <0xf 0xffe09000 0 0x1000>; + ranges = <0x02000000 0 0xf8000000 0xc 0x18000000 0 0x08000000 + 0x01000000 0 0x00000000 0xf 0xffc20000 0 0x00010000>; + pcie@0 { + ranges = <0x02000000 0 0xf8000000 + 0x02000000 0 0xf8000000 + 0 0x08000000 + + 0x01000000 0 0x00000000 + 0x01000000 0 0x00000000 + 0 0x00010000>; + }; + }; + + pci2: pcie@fffe0a000 { + reg = <0xf 0xffe0a000 0 0x1000>; + ranges = <0x02000000 0 0xf8000000 0xc 0x10000000 0 0x08000000 + 0x01000000 0 0x00000000 0xf 0xffc10000 0 0x00010000>; + pcie@0 { + ranges = <0x02000000 0 0xf8000000 + 0x02000000 0 0xf8000000 + 0 0x08000000 + + 0x01000000 0 0x00000000 + 0x01000000 0 0x00000000 + 0 0x00010000>; + }; + }; + + pci3: pcie@fffe0b000 { + reg = <0xf 0xffe0b000 0 0x1000>; + ranges = <0x02000000 0 0xe0000000 0xc 0x20000000 0 0x20000000 + 0x01000000 0 0x00000000 0xf 0xffc30000 0 0x00010000>; + pcie@0 { + ranges = <0x02000000 0 0xe0000000 + 0x02000000 0 0xe0000000 + 0 0x20000000 + + 0x01000000 0 0x00000000 + 0x01000000 0 0x00000000 + 0 0x00100000>; + }; + }; +}; + +/include/ "fsl/mpc8536si-post.dtsi" +/include/ "mpc8536ds.dtsi" diff --git a/arch/powerpc/boot/dts/mpc8540ads.dts b/arch/powerpc/boot/dts/mpc8540ads.dts new file mode 100644 index 000000000..7ce274c9a --- /dev/null +++ b/arch/powerpc/boot/dts/mpc8540ads.dts @@ -0,0 +1,359 @@ +/* + * MPC8540 ADS Device Tree Source + * + * Copyright 2006, 2008 Freescale Semiconductor Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +/dts-v1/; + +/include/ "fsl/e500v2_power_isa.dtsi" + +/ { + model = "MPC8540ADS"; + compatible = "MPC8540ADS", "MPC85xxADS"; + #address-cells = <1>; + #size-cells = <1>; + + aliases { + ethernet0 = &enet0; + ethernet1 = &enet1; + ethernet2 = &enet2; + serial0 = &serial0; + serial1 = &serial1; + pci0 = &pci0; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + PowerPC,8540@0 { + device_type = "cpu"; + reg = <0x0>; + d-cache-line-size = <32>; // 32 bytes + i-cache-line-size = <32>; // 32 bytes + d-cache-size = <0x8000>; // L1, 32K + i-cache-size = <0x8000>; // L1, 32K + timebase-frequency = <0>; // 33 MHz, from uboot + bus-frequency = <0>; // 166 MHz + clock-frequency = <0>; // 825 MHz, from uboot + next-level-cache = <&L2>; + }; + }; + + memory { + device_type = "memory"; + reg = <0x0 0x8000000>; // 128M at 0x0 + }; + + soc8540@e0000000 { + #address-cells = <1>; + #size-cells = <1>; + device_type = "soc"; + compatible = "simple-bus"; + ranges = <0x0 0xe0000000 0x100000>; + bus-frequency = <0>; + + ecm-law@0 { + compatible = "fsl,ecm-law"; + reg = <0x0 0x1000>; + fsl,num-laws = <8>; + }; + + ecm@1000 { + compatible = "fsl,mpc8540-ecm", "fsl,ecm"; + reg = <0x1000 0x1000>; + interrupts = <17 2>; + interrupt-parent = <&mpic>; + }; + + memory-controller@2000 { + compatible = "fsl,mpc8540-memory-controller"; + reg = <0x2000 0x1000>; + interrupt-parent = <&mpic>; + interrupts = <18 2>; + }; + + L2: l2-cache-controller@20000 { + compatible = "fsl,mpc8540-l2-cache-controller"; + reg = <0x20000 0x1000>; + cache-line-size = <32>; // 32 bytes + cache-size = <0x40000>; // L2, 256K + interrupt-parent = <&mpic>; + interrupts = <16 2>; + }; + + i2c@3000 { + #address-cells = <1>; + #size-cells = <0>; + cell-index = <0>; + compatible = "fsl-i2c"; + reg = <0x3000 0x100>; + interrupts = <43 2>; + interrupt-parent = <&mpic>; + dfsrr; + }; + + dma@21300 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,mpc8540-dma", "fsl,eloplus-dma"; + reg = <0x21300 0x4>; + ranges = <0x0 0x21100 0x200>; + cell-index = <0>; + dma-channel@0 { + compatible = "fsl,mpc8540-dma-channel", + "fsl,eloplus-dma-channel"; + reg = <0x0 0x80>; + cell-index = <0>; + interrupt-parent = <&mpic>; + interrupts = <20 2>; + }; + dma-channel@80 { + compatible = "fsl,mpc8540-dma-channel", + "fsl,eloplus-dma-channel"; + reg = <0x80 0x80>; + cell-index = <1>; + interrupt-parent = <&mpic>; + interrupts = <21 2>; + }; + dma-channel@100 { + compatible = "fsl,mpc8540-dma-channel", + "fsl,eloplus-dma-channel"; + reg = <0x100 0x80>; + cell-index = <2>; + interrupt-parent = <&mpic>; + interrupts = <22 2>; + }; + dma-channel@180 { + compatible = "fsl,mpc8540-dma-channel", + "fsl,eloplus-dma-channel"; + reg = <0x180 0x80>; + cell-index = <3>; + interrupt-parent = <&mpic>; + interrupts = <23 2>; + }; + }; + + enet0: ethernet@24000 { + #address-cells = <1>; + #size-cells = <1>; + cell-index = <0>; + device_type = "network"; + model = "TSEC"; + compatible = "gianfar"; + reg = <0x24000 0x1000>; + ranges = <0x0 0x24000 0x1000>; + local-mac-address = [ 00 00 00 00 00 00 ]; + interrupts = <29 2 30 2 34 2>; + interrupt-parent = <&mpic>; + tbi-handle = <&tbi0>; + phy-handle = <&phy0>; + + mdio@520 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,gianfar-mdio"; + reg = <0x520 0x20>; + + phy0: ethernet-phy@0 { + interrupt-parent = <&mpic>; + interrupts = <5 1>; + reg = <0x0>; + }; + phy1: ethernet-phy@1 { + interrupt-parent = <&mpic>; + interrupts = <5 1>; + reg = <0x1>; + }; + phy3: ethernet-phy@3 { + interrupt-parent = <&mpic>; + interrupts = <7 1>; + reg = <0x3>; + }; + tbi0: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + }; + + enet1: ethernet@25000 { + #address-cells = <1>; + #size-cells = <1>; + cell-index = <1>; + device_type = "network"; + model = "TSEC"; + compatible = "gianfar"; + reg = <0x25000 0x1000>; + ranges = <0x0 0x25000 0x1000>; + local-mac-address = [ 00 00 00 00 00 00 ]; + interrupts = <35 2 36 2 40 2>; + interrupt-parent = <&mpic>; + tbi-handle = <&tbi1>; + phy-handle = <&phy1>; + + mdio@520 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,gianfar-tbi"; + reg = <0x520 0x20>; + + tbi1: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + }; + + enet2: ethernet@26000 { + #address-cells = <1>; + #size-cells = <1>; + cell-index = <2>; + device_type = "network"; + model = "FEC"; + compatible = "gianfar"; + reg = <0x26000 0x1000>; + ranges = <0x0 0x26000 0x1000>; + local-mac-address = [ 00 00 00 00 00 00 ]; + interrupts = <41 2>; + interrupt-parent = <&mpic>; + tbi-handle = <&tbi2>; + phy-handle = <&phy3>; + + mdio@520 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,gianfar-tbi"; + reg = <0x520 0x20>; + + tbi2: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + }; + + serial0: serial@4500 { + cell-index = <0>; + device_type = "serial"; + compatible = "fsl,ns16550", "ns16550"; + reg = <0x4500 0x100>; // reg base, size + clock-frequency = <0>; // should we fill in in uboot? + interrupts = <42 2>; + interrupt-parent = <&mpic>; + }; + + serial1: serial@4600 { + cell-index = <1>; + device_type = "serial"; + compatible = "fsl,ns16550", "ns16550"; + reg = <0x4600 0x100>; // reg base, size + clock-frequency = <0>; // should we fill in in uboot? + interrupts = <42 2>; + interrupt-parent = <&mpic>; + }; + mpic: pic@40000 { + interrupt-controller; + #address-cells = <0>; + #interrupt-cells = <2>; + reg = <0x40000 0x40000>; + compatible = "chrp,open-pic"; + device_type = "open-pic"; + }; + }; + + pci0: pci@e0008000 { + interrupt-map-mask = <0xf800 0x0 0x0 0x7>; + interrupt-map = < + + /* IDSEL 0x02 */ + 0x1000 0x0 0x0 0x1 &mpic 0x1 0x1 + 0x1000 0x0 0x0 0x2 &mpic 0x2 0x1 + 0x1000 0x0 0x0 0x3 &mpic 0x3 0x1 + 0x1000 0x0 0x0 0x4 &mpic 0x4 0x1 + + /* IDSEL 0x03 */ + 0x1800 0x0 0x0 0x1 &mpic 0x4 0x1 + 0x1800 0x0 0x0 0x2 &mpic 0x1 0x1 + 0x1800 0x0 0x0 0x3 &mpic 0x2 0x1 + 0x1800 0x0 0x0 0x4 &mpic 0x3 0x1 + + /* IDSEL 0x04 */ + 0x2000 0x0 0x0 0x1 &mpic 0x3 0x1 + 0x2000 0x0 0x0 0x2 &mpic 0x4 0x1 + 0x2000 0x0 0x0 0x3 &mpic 0x1 0x1 + 0x2000 0x0 0x0 0x4 &mpic 0x2 0x1 + + /* IDSEL 0x05 */ + 0x2800 0x0 0x0 0x1 &mpic 0x2 0x1 + 0x2800 0x0 0x0 0x2 &mpic 0x3 0x1 + 0x2800 0x0 0x0 0x3 &mpic 0x4 0x1 + 0x2800 0x0 0x0 0x4 &mpic 0x1 0x1 + + /* IDSEL 0x0c */ + 0x6000 0x0 0x0 0x1 &mpic 0x1 0x1 + 0x6000 0x0 0x0 0x2 &mpic 0x2 0x1 + 0x6000 0x0 0x0 0x3 &mpic 0x3 0x1 + 0x6000 0x0 0x0 0x4 &mpic 0x4 0x1 + + /* IDSEL 0x0d */ + 0x6800 0x0 0x0 0x1 &mpic 0x4 0x1 + 0x6800 0x0 0x0 0x2 &mpic 0x1 0x1 + 0x6800 0x0 0x0 0x3 &mpic 0x2 0x1 + 0x6800 0x0 0x0 0x4 &mpic 0x3 0x1 + + /* IDSEL 0x0e */ + 0x7000 0x0 0x0 0x1 &mpic 0x3 0x1 + 0x7000 0x0 0x0 0x2 &mpic 0x4 0x1 + 0x7000 0x0 0x0 0x3 &mpic 0x1 0x1 + 0x7000 0x0 0x0 0x4 &mpic 0x2 0x1 + + /* IDSEL 0x0f */ + 0x7800 0x0 0x0 0x1 &mpic 0x2 0x1 + 0x7800 0x0 0x0 0x2 &mpic 0x3 0x1 + 0x7800 0x0 0x0 0x3 &mpic 0x4 0x1 + 0x7800 0x0 0x0 0x4 &mpic 0x1 0x1 + + /* IDSEL 0x12 */ + 0x9000 0x0 0x0 0x1 &mpic 0x1 0x1 + 0x9000 0x0 0x0 0x2 &mpic 0x2 0x1 + 0x9000 0x0 0x0 0x3 &mpic 0x3 0x1 + 0x9000 0x0 0x0 0x4 &mpic 0x4 0x1 + + /* IDSEL 0x13 */ + 0x9800 0x0 0x0 0x1 &mpic 0x4 0x1 + 0x9800 0x0 0x0 0x2 &mpic 0x1 0x1 + 0x9800 0x0 0x0 0x3 &mpic 0x2 0x1 + 0x9800 0x0 0x0 0x4 &mpic 0x3 0x1 + + /* IDSEL 0x14 */ + 0xa000 0x0 0x0 0x1 &mpic 0x3 0x1 + 0xa000 0x0 0x0 0x2 &mpic 0x4 0x1 + 0xa000 0x0 0x0 0x3 &mpic 0x1 0x1 + 0xa000 0x0 0x0 0x4 &mpic 0x2 0x1 + + /* IDSEL 0x15 */ + 0xa800 0x0 0x0 0x1 &mpic 0x2 0x1 + 0xa800 0x0 0x0 0x2 &mpic 0x3 0x1 + 0xa800 0x0 0x0 0x3 &mpic 0x4 0x1 + 0xa800 0x0 0x0 0x4 &mpic 0x1 0x1>; + interrupt-parent = <&mpic>; + interrupts = <24 2>; + bus-range = <0 0>; + ranges = <0x2000000 0x0 0x80000000 0x80000000 0x0 0x20000000 + 0x1000000 0x0 0x0 0xe2000000 0x0 0x100000>; + clock-frequency = <66666666>; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + reg = <0xe0008000 0x1000>; + compatible = "fsl,mpc8540-pcix", "fsl,mpc8540-pci"; + device_type = "pci"; + }; +}; diff --git a/arch/powerpc/boot/dts/mpc8541cds.dts b/arch/powerpc/boot/dts/mpc8541cds.dts new file mode 100644 index 000000000..4d35a3e0f --- /dev/null +++ b/arch/powerpc/boot/dts/mpc8541cds.dts @@ -0,0 +1,379 @@ +/* + * MPC8541 CDS Device Tree Source + * + * Copyright 2006, 2008 Freescale Semiconductor Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +/dts-v1/; + +/include/ "fsl/e500v2_power_isa.dtsi" + +/ { + model = "MPC8541CDS"; + compatible = "MPC8541CDS", "MPC85xxCDS"; + #address-cells = <1>; + #size-cells = <1>; + + aliases { + ethernet0 = &enet0; + ethernet1 = &enet1; + serial0 = &serial0; + serial1 = &serial1; + pci0 = &pci0; + pci1 = &pci1; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + PowerPC,8541@0 { + device_type = "cpu"; + reg = <0x0>; + d-cache-line-size = <32>; // 32 bytes + i-cache-line-size = <32>; // 32 bytes + d-cache-size = <0x8000>; // L1, 32K + i-cache-size = <0x8000>; // L1, 32K + timebase-frequency = <0>; // 33 MHz, from uboot + bus-frequency = <0>; // 166 MHz + clock-frequency = <0>; // 825 MHz, from uboot + next-level-cache = <&L2>; + }; + }; + + memory { + device_type = "memory"; + reg = <0x0 0x8000000>; // 128M at 0x0 + }; + + soc8541@e0000000 { + #address-cells = <1>; + #size-cells = <1>; + device_type = "soc"; + compatible = "simple-bus"; + ranges = <0x0 0xe0000000 0x100000>; + bus-frequency = <0>; + + ecm-law@0 { + compatible = "fsl,ecm-law"; + reg = <0x0 0x1000>; + fsl,num-laws = <8>; + }; + + ecm@1000 { + compatible = "fsl,mpc8541-ecm", "fsl,ecm"; + reg = <0x1000 0x1000>; + interrupts = <17 2>; + interrupt-parent = <&mpic>; + }; + + memory-controller@2000 { + compatible = "fsl,mpc8541-memory-controller"; + reg = <0x2000 0x1000>; + interrupt-parent = <&mpic>; + interrupts = <18 2>; + }; + + L2: l2-cache-controller@20000 { + compatible = "fsl,mpc8541-l2-cache-controller"; + reg = <0x20000 0x1000>; + cache-line-size = <32>; // 32 bytes + cache-size = <0x40000>; // L2, 256K + interrupt-parent = <&mpic>; + interrupts = <16 2>; + }; + + i2c@3000 { + #address-cells = <1>; + #size-cells = <0>; + cell-index = <0>; + compatible = "fsl-i2c"; + reg = <0x3000 0x100>; + interrupts = <43 2>; + interrupt-parent = <&mpic>; + dfsrr; + }; + + dma@21300 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,mpc8541-dma", "fsl,eloplus-dma"; + reg = <0x21300 0x4>; + ranges = <0x0 0x21100 0x200>; + cell-index = <0>; + dma-channel@0 { + compatible = "fsl,mpc8541-dma-channel", + "fsl,eloplus-dma-channel"; + reg = <0x0 0x80>; + cell-index = <0>; + interrupt-parent = <&mpic>; + interrupts = <20 2>; + }; + dma-channel@80 { + compatible = "fsl,mpc8541-dma-channel", + "fsl,eloplus-dma-channel"; + reg = <0x80 0x80>; + cell-index = <1>; + interrupt-parent = <&mpic>; + interrupts = <21 2>; + }; + dma-channel@100 { + compatible = "fsl,mpc8541-dma-channel", + "fsl,eloplus-dma-channel"; + reg = <0x100 0x80>; + cell-index = <2>; + interrupt-parent = <&mpic>; + interrupts = <22 2>; + }; + dma-channel@180 { + compatible = "fsl,mpc8541-dma-channel", + "fsl,eloplus-dma-channel"; + reg = <0x180 0x80>; + cell-index = <3>; + interrupt-parent = <&mpic>; + interrupts = <23 2>; + }; + }; + + enet0: ethernet@24000 { + #address-cells = <1>; + #size-cells = <1>; + cell-index = <0>; + device_type = "network"; + model = "TSEC"; + compatible = "gianfar"; + reg = <0x24000 0x1000>; + ranges = <0x0 0x24000 0x1000>; + local-mac-address = [ 00 00 00 00 00 00 ]; + interrupts = <29 2 30 2 34 2>; + interrupt-parent = <&mpic>; + tbi-handle = <&tbi0>; + phy-handle = <&phy0>; + + mdio@520 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,gianfar-mdio"; + reg = <0x520 0x20>; + + phy0: ethernet-phy@0 { + interrupt-parent = <&mpic>; + interrupts = <5 1>; + reg = <0x0>; + }; + phy1: ethernet-phy@1 { + interrupt-parent = <&mpic>; + interrupts = <5 1>; + reg = <0x1>; + }; + tbi0: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + }; + + enet1: ethernet@25000 { + #address-cells = <1>; + #size-cells = <1>; + cell-index = <1>; + device_type = "network"; + model = "TSEC"; + compatible = "gianfar"; + reg = <0x25000 0x1000>; + ranges = <0x0 0x25000 0x1000>; + local-mac-address = [ 00 00 00 00 00 00 ]; + interrupts = <35 2 36 2 40 2>; + interrupt-parent = <&mpic>; + tbi-handle = <&tbi1>; + phy-handle = <&phy1>; + + mdio@520 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,gianfar-tbi"; + reg = <0x520 0x20>; + + tbi1: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + }; + + serial0: serial@4500 { + cell-index = <0>; + device_type = "serial"; + compatible = "fsl,ns16550", "ns16550"; + reg = <0x4500 0x100>; // reg base, size + clock-frequency = <0>; // should we fill in in uboot? + interrupts = <42 2>; + interrupt-parent = <&mpic>; + }; + + serial1: serial@4600 { + cell-index = <1>; + device_type = "serial"; + compatible = "fsl,ns16550", "ns16550"; + reg = <0x4600 0x100>; // reg base, size + clock-frequency = <0>; // should we fill in in uboot? + interrupts = <42 2>; + interrupt-parent = <&mpic>; + }; + + crypto@30000 { + compatible = "fsl,sec2.0"; + reg = <0x30000 0x10000>; + interrupts = <45 2>; + interrupt-parent = <&mpic>; + fsl,num-channels = <4>; + fsl,channel-fifo-len = <24>; + fsl,exec-units-mask = <0x7e>; + fsl,descriptor-types-mask = <0x01010ebf>; + }; + + mpic: pic@40000 { + interrupt-controller; + #address-cells = <0>; + #interrupt-cells = <2>; + reg = <0x40000 0x40000>; + compatible = "chrp,open-pic"; + device_type = "open-pic"; + }; + + cpm@919c0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,mpc8541-cpm", "fsl,cpm2"; + reg = <0x919c0 0x30>; + ranges; + + muram@80000 { + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x80000 0x10000>; + + data@0 { + compatible = "fsl,cpm-muram-data"; + reg = <0x0 0x2000 0x9000 0x1000>; + }; + }; + + brg@919f0 { + compatible = "fsl,mpc8541-brg", + "fsl,cpm2-brg", + "fsl,cpm-brg"; + reg = <0x919f0 0x10 0x915f0 0x10>; + }; + + cpmpic: pic@90c00 { + interrupt-controller; + #address-cells = <0>; + #interrupt-cells = <2>; + interrupts = <46 2>; + interrupt-parent = <&mpic>; + reg = <0x90c00 0x80>; + compatible = "fsl,mpc8541-cpm-pic", "fsl,cpm2-pic"; + }; + }; + }; + + pci0: pci@e0008000 { + interrupt-map-mask = <0x1f800 0x0 0x0 0x7>; + interrupt-map = < + + /* IDSEL 0x10 */ + 0x8000 0x0 0x0 0x1 &mpic 0x0 0x1 + 0x8000 0x0 0x0 0x2 &mpic 0x1 0x1 + 0x8000 0x0 0x0 0x3 &mpic 0x2 0x1 + 0x8000 0x0 0x0 0x4 &mpic 0x3 0x1 + + /* IDSEL 0x11 */ + 0x8800 0x0 0x0 0x1 &mpic 0x0 0x1 + 0x8800 0x0 0x0 0x2 &mpic 0x1 0x1 + 0x8800 0x0 0x0 0x3 &mpic 0x2 0x1 + 0x8800 0x0 0x0 0x4 &mpic 0x3 0x1 + + /* IDSEL 0x12 (Slot 1) */ + 0x9000 0x0 0x0 0x1 &mpic 0x0 0x1 + 0x9000 0x0 0x0 0x2 &mpic 0x1 0x1 + 0x9000 0x0 0x0 0x3 &mpic 0x2 0x1 + 0x9000 0x0 0x0 0x4 &mpic 0x3 0x1 + + /* IDSEL 0x13 (Slot 2) */ + 0x9800 0x0 0x0 0x1 &mpic 0x1 0x1 + 0x9800 0x0 0x0 0x2 &mpic 0x2 0x1 + 0x9800 0x0 0x0 0x3 &mpic 0x3 0x1 + 0x9800 0x0 0x0 0x4 &mpic 0x0 0x1 + + /* IDSEL 0x14 (Slot 3) */ + 0xa000 0x0 0x0 0x1 &mpic 0x2 0x1 + 0xa000 0x0 0x0 0x2 &mpic 0x3 0x1 + 0xa000 0x0 0x0 0x3 &mpic 0x0 0x1 + 0xa000 0x0 0x0 0x4 &mpic 0x1 0x1 + + /* IDSEL 0x15 (Slot 4) */ + 0xa800 0x0 0x0 0x1 &mpic 0x3 0x1 + 0xa800 0x0 0x0 0x2 &mpic 0x0 0x1 + 0xa800 0x0 0x0 0x3 &mpic 0x1 0x1 + 0xa800 0x0 0x0 0x4 &mpic 0x2 0x1 + + /* Bus 1 (Tundra Bridge) */ + /* IDSEL 0x12 (ISA bridge) */ + 0x19000 0x0 0x0 0x1 &mpic 0x0 0x1 + 0x19000 0x0 0x0 0x2 &mpic 0x1 0x1 + 0x19000 0x0 0x0 0x3 &mpic 0x2 0x1 + 0x19000 0x0 0x0 0x4 &mpic 0x3 0x1>; + interrupt-parent = <&mpic>; + interrupts = <24 2>; + bus-range = <0 0>; + ranges = <0x2000000 0x0 0x80000000 0x80000000 0x0 0x20000000 + 0x1000000 0x0 0x0 0xe2000000 0x0 0x100000>; + clock-frequency = <66666666>; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + reg = <0xe0008000 0x1000>; + compatible = "fsl,mpc8540-pci"; + device_type = "pci"; + + i8259@19000 { + interrupt-controller; + device_type = "interrupt-controller"; + reg = <0x19000 0x0 0x0 0x0 0x1>; + #address-cells = <0>; + #interrupt-cells = <2>; + compatible = "chrp,iic"; + interrupts = <1>; + interrupt-parent = <&pci0>; + }; + }; + + pci1: pci@e0009000 { + interrupt-map-mask = <0xf800 0x0 0x0 0x7>; + interrupt-map = < + + /* IDSEL 0x15 */ + 0xa800 0x0 0x0 0x1 &mpic 0xb 0x1 + 0xa800 0x0 0x0 0x2 &mpic 0xb 0x1 + 0xa800 0x0 0x0 0x3 &mpic 0xb 0x1 + 0xa800 0x0 0x0 0x4 &mpic 0xb 0x1>; + interrupt-parent = <&mpic>; + interrupts = <25 2>; + bus-range = <0 0>; + ranges = <0x2000000 0x0 0xa0000000 0xa0000000 0x0 0x20000000 + 0x1000000 0x0 0x0 0xe3000000 0x0 0x100000>; + clock-frequency = <66666666>; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + reg = <0xe0009000 0x1000>; + compatible = "fsl,mpc8540-pci"; + device_type = "pci"; + }; +}; diff --git a/arch/powerpc/boot/dts/mpc8544ds.dts b/arch/powerpc/boot/dts/mpc8544ds.dts new file mode 100644 index 000000000..ed38874c3 --- /dev/null +++ b/arch/powerpc/boot/dts/mpc8544ds.dts @@ -0,0 +1,107 @@ +/* + * MPC8544 DS Device Tree Source + * + * Copyright 2007, 2008 Freescale Semiconductor Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +/include/ "fsl/mpc8544si-pre.dtsi" + +/ { + model = "MPC8544DS"; + compatible = "MPC8544DS", "MPC85xxDS"; + + memory { + device_type = "memory"; + reg = <0 0 0 0>; // Filled by U-Boot + }; + + board_lbc: lbc: localbus@e0005000 { + reg = <0 0xe0005000 0 0x1000>; + + ranges = <0x0 0x0 0x0 0xff800000 0x800000>; + }; + + board_soc: soc: soc8544@e0000000 { + ranges = <0x0 0x0 0xe0000000 0x100000>; + }; + + pci0: pci@e0008000 { + reg = <0 0xe0008000 0 0x1000>; + ranges = <0x2000000 0x0 0xc0000000 0 0xc0000000 0x0 0x20000000 + 0x1000000 0x0 0x00000000 0 0xe1000000 0x0 0x10000>; + clock-frequency = <66666666>; + interrupt-map-mask = <0xf800 0x0 0x0 0x7>; + interrupt-map = < + + /* IDSEL 0x11 J17 Slot 1 */ + 0x8800 0x0 0x0 0x1 &mpic 0x2 0x1 0 0 + 0x8800 0x0 0x0 0x2 &mpic 0x3 0x1 0 0 + 0x8800 0x0 0x0 0x3 &mpic 0x4 0x1 0 0 + 0x8800 0x0 0x0 0x4 &mpic 0x1 0x1 0 0 + + /* IDSEL 0x12 J16 Slot 2 */ + + 0x9000 0x0 0x0 0x1 &mpic 0x3 0x1 0 0 + 0x9000 0x0 0x0 0x2 &mpic 0x4 0x1 0 0 + 0x9000 0x0 0x0 0x3 &mpic 0x2 0x1 0 0 + 0x9000 0x0 0x0 0x4 &mpic 0x1 0x1 0 0>; + }; + + pci1: pcie@e0009000 { + reg = <0x0 0xe0009000 0x0 0x1000>; + ranges = <0x2000000 0x0 0x80000000 0 0x80000000 0x0 0x20000000 + 0x1000000 0x0 0x00000000 0 0xe1010000 0x0 0x10000>; + pcie@0 { + ranges = <0x2000000 0x0 0x80000000 + 0x2000000 0x0 0x80000000 + 0x0 0x20000000 + + 0x1000000 0x0 0x0 + 0x1000000 0x0 0x0 + 0x0 0x10000>; + }; + }; + + pci2: pcie@e000a000 { + reg = <0x0 0xe000a000 0x0 0x1000>; + ranges = <0x2000000 0x0 0xa0000000 0 0xa0000000 0x0 0x10000000 + 0x1000000 0x0 0x00000000 0 0xe1020000 0x0 0x10000>; + pcie@0 { + ranges = <0x2000000 0x0 0xa0000000 + 0x2000000 0x0 0xa0000000 + 0x0 0x10000000 + + 0x1000000 0x0 0x0 + 0x1000000 0x0 0x0 + 0x0 0x10000>; + }; + }; + + board_pci3: pci3: pcie@e000b000 { + reg = <0x0 0xe000b000 0x0 0x1000>; + ranges = <0x2000000 0x0 0xb0000000 0 0xb0000000 0x0 0x100000 + 0x1000000 0x0 0x00000000 0 0xb0100000 0x0 0x100000>; + pcie@0 { + ranges = <0x2000000 0x0 0xb0000000 + 0x2000000 0x0 0xb0000000 + 0x0 0x100000 + + 0x1000000 0x0 0x0 + 0x1000000 0x0 0x0 + 0x0 0x100000>; + }; + }; +}; + +/* + * mpc8544ds.dtsi must be last to ensure board_pci3 overrides pci3 settings + * for interrupt-map & interrupt-map-mask + */ + +/include/ "fsl/mpc8544si-post.dtsi" +/include/ "mpc8544ds.dtsi" diff --git a/arch/powerpc/boot/dts/mpc8544ds.dtsi b/arch/powerpc/boot/dts/mpc8544ds.dtsi new file mode 100644 index 000000000..47d986b04 --- /dev/null +++ b/arch/powerpc/boot/dts/mpc8544ds.dtsi @@ -0,0 +1,207 @@ +/* + * MPC8544DS Device Tree Source stub (no addresses or top-level ranges) + * + * Copyright 2011 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +&board_lbc { + nor@0,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "cfi-flash"; + reg = <0x0 0x0 0x800000>; + bank-width = <2>; + device-width = <1>; + + partition@0 { + reg = <0x0 0x10000>; + label = "dtb-nor"; + }; + + partition@20000 { + reg = <0x20000 0x30000>; + label = "diagnostic-nor"; + read-only; + }; + + partition@200000 { + reg = <0x200000 0x200000>; + label = "dink-nor"; + read-only; + }; + + partition@400000 { + reg = <0x400000 0x380000>; + label = "kernel-nor"; + }; + + partition@780000 { + reg = <0x780000 0x80000>; + label = "u-boot-nor"; + read-only; + }; + }; +}; + +&board_soc { + enet0: ethernet@24000 { + phy-handle = <&phy0>; + tbi-handle = <&tbi0>; + phy-connection-type = "rgmii-id"; + }; + + mdio@24520 { + phy0: ethernet-phy@0 { + interrupts = <10 1 0 0>; + reg = <0x0>; + }; + phy1: ethernet-phy@1 { + interrupts = <10 1 0 0>; + reg = <0x1>; + }; + + sgmii_phy0: sgmii-phy@0 { + interrupts = <6 1 0 0>; + reg = <0x1c>; + }; + sgmii_phy1: sgmii-phy@1 { + interrupts = <6 1 0 0>; + reg = <0x1d>; + }; + + tbi0: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + + enet2: ethernet@26000 { + phy-handle = <&phy1>; + tbi-handle = <&tbi1>; + phy-connection-type = "rgmii-id"; + }; + + mdio@26520 { + tbi1: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; +}; + +&board_pci3 { + pcie@0 { + interrupt-map-mask = <0xff00 0x0 0x0 0x7>; + interrupt-map = < + // IDSEL 0x1c USB + 0xe000 0x0 0x0 0x1 &i8259 0xc 0x2 + 0xe100 0x0 0x0 0x2 &i8259 0x9 0x2 + 0xe200 0x0 0x0 0x3 &i8259 0xa 0x2 + 0xe300 0x0 0x0 0x4 &i8259 0xb 0x2 + + // IDSEL 0x1d Audio + 0xe800 0x0 0x0 0x1 &i8259 0x6 0x2 + + // IDSEL 0x1e Legacy + 0xf000 0x0 0x0 0x1 &i8259 0x7 0x2 + 0xf100 0x0 0x0 0x1 &i8259 0x7 0x2 + + // IDSEL 0x1f IDE/SATA + 0xf800 0x0 0x0 0x1 &i8259 0xe 0x2 + 0xf900 0x0 0x0 0x1 &i8259 0x5 0x2 + >; + + + uli1575@0 { + reg = <0x0 0x0 0x0 0x0 0x0>; + #size-cells = <2>; + #address-cells = <3>; + ranges = <0x2000000 0x0 0xb0000000 + 0x2000000 0x0 0xb0000000 + 0x0 0x100000 + + 0x1000000 0x0 0x0 + 0x1000000 0x0 0x0 + 0x0 0x100000>; + isa@1e { + device_type = "isa"; + #interrupt-cells = <2>; + #size-cells = <1>; + #address-cells = <2>; + reg = <0xf000 0x0 0x0 0x0 0x0>; + ranges = <0x1 0x0 0x1000000 0x0 0x0 + 0x1000>; + interrupt-parent = <&i8259>; + + i8259: interrupt-controller@20 { + reg = <0x1 0x20 0x2 + 0x1 0xa0 0x2 + 0x1 0x4d0 0x2>; + interrupt-controller; + device_type = "interrupt-controller"; + #address-cells = <0>; + #interrupt-cells = <2>; + compatible = "chrp,iic"; + interrupts = <9 2 0 0>; + interrupt-parent = <&mpic>; + }; + + i8042@60 { + #size-cells = <0>; + #address-cells = <1>; + reg = <0x1 0x60 0x1 0x1 0x64 0x1>; + interrupts = <1 3 12 3>; + interrupt-parent = + <&i8259>; + + keyboard@0 { + reg = <0x0>; + compatible = "pnpPNP,303"; + }; + + mouse@1 { + reg = <0x1>; + compatible = "pnpPNP,f03"; + }; + }; + + rtc@70 { + compatible = "pnpPNP,b00"; + reg = <0x1 0x70 0x2>; + }; + + gpio@400 { + reg = <0x1 0x400 0x80>; + }; + }; + }; + }; +}; diff --git a/arch/powerpc/boot/dts/mpc8548cds.dtsi b/arch/powerpc/boot/dts/mpc8548cds.dtsi new file mode 100644 index 000000000..3bc7d4711 --- /dev/null +++ b/arch/powerpc/boot/dts/mpc8548cds.dtsi @@ -0,0 +1,302 @@ +/* + * MPC8548CDS Device Tree Source stub (no addresses or top-level ranges) + * + * Copyright 2012 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +&board_lbc { + nor@0,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "cfi-flash"; + reg = <0x0 0x0 0x01000000>; + bank-width = <2>; + device-width = <2>; + + partition@0 { + reg = <0x0 0x0b00000>; + label = "ramdisk-nor"; + }; + + partition@300000 { + reg = <0x0b00000 0x0400000>; + label = "kernel-nor"; + }; + + partition@700000 { + reg = <0x0f00000 0x060000>; + label = "dtb-nor"; + }; + + partition@760000 { + reg = <0x0f60000 0x020000>; + label = "env-nor"; + read-only; + }; + + partition@780000 { + reg = <0x0f80000 0x080000>; + label = "u-boot-nor"; + read-only; + }; + }; + + board-control@1,0 { + compatible = "fsl,mpc8548cds-fpga"; + reg = <0x1 0x0 0x1000>; + }; +}; + +&board_soc { + i2c@3000 { + eeprom@50 { + compatible = "atmel,24c64"; + reg = <0x50>; + }; + + eeprom@56 { + compatible = "atmel,24c64"; + reg = <0x56>; + }; + + eeprom@57 { + compatible = "atmel,24c64"; + reg = <0x57>; + }; + }; + + i2c@3100 { + eeprom@50 { + compatible = "atmel,24c64"; + reg = <0x50>; + }; + }; + + enet0: ethernet@24000 { + tbi-handle = <&tbi0>; + phy-handle = <&phy0>; + }; + + mdio@24520 { + phy0: ethernet-phy@0 { + interrupts = <5 1 0 0>; + reg = <0x0>; + }; + phy1: ethernet-phy@1 { + interrupts = <5 1 0 0>; + reg = <0x1>; + }; + phy2: ethernet-phy@2 { + interrupts = <5 1 0 0>; + reg = <0x2>; + }; + phy3: ethernet-phy@3 { + interrupts = <5 1 0 0>; + reg = <0x3>; + }; + tbi0: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + + enet1: ethernet@25000 { + tbi-handle = <&tbi1>; + phy-handle = <&phy1>; + }; + + mdio@25520 { + tbi1: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + + enet2: ethernet@26000 { + tbi-handle = <&tbi2>; + phy-handle = <&phy2>; + }; + + mdio@26520 { + tbi2: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + + enet3: ethernet@27000 { + tbi-handle = <&tbi3>; + phy-handle = <&phy3>; + }; + + mdio@27520 { + tbi3: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; +}; + +&board_pci0 { + interrupt-map-mask = <0xf800 0x0 0x0 0x7>; + interrupt-map = < + /* IDSEL 0x4 (PCIX Slot 2) */ + 0x2000 0x0 0x0 0x1 &mpic 0x0 0x1 0 0 + 0x2000 0x0 0x0 0x2 &mpic 0x1 0x1 0 0 + 0x2000 0x0 0x0 0x3 &mpic 0x2 0x1 0 0 + 0x2000 0x0 0x0 0x4 &mpic 0x3 0x1 0 0 + + /* IDSEL 0x5 (PCIX Slot 3) */ + 0x2800 0x0 0x0 0x1 &mpic 0x1 0x1 0 0 + 0x2800 0x0 0x0 0x2 &mpic 0x2 0x1 0 0 + 0x2800 0x0 0x0 0x3 &mpic 0x3 0x1 0 0 + 0x2800 0x0 0x0 0x4 &mpic 0x0 0x1 0 0 + + /* IDSEL 0x6 (PCIX Slot 4) */ + 0x3000 0x0 0x0 0x1 &mpic 0x2 0x1 0 0 + 0x3000 0x0 0x0 0x2 &mpic 0x3 0x1 0 0 + 0x3000 0x0 0x0 0x3 &mpic 0x0 0x1 0 0 + 0x3000 0x0 0x0 0x4 &mpic 0x1 0x1 0 0 + + /* IDSEL 0x8 (PCIX Slot 5) */ + 0x4000 0x0 0x0 0x1 &mpic 0x0 0x1 0 0 + 0x4000 0x0 0x0 0x2 &mpic 0x1 0x1 0 0 + 0x4000 0x0 0x0 0x3 &mpic 0x2 0x1 0 0 + 0x4000 0x0 0x0 0x4 &mpic 0x3 0x1 0 0 + + /* IDSEL 0xC (Tsi310 bridge) */ + 0x6000 0x0 0x0 0x1 &mpic 0x0 0x1 0 0 + 0x6000 0x0 0x0 0x2 &mpic 0x1 0x1 0 0 + 0x6000 0x0 0x0 0x3 &mpic 0x2 0x1 0 0 + 0x6000 0x0 0x0 0x4 &mpic 0x3 0x1 0 0 + + /* IDSEL 0x14 (Slot 2) */ + 0xa000 0x0 0x0 0x1 &mpic 0x0 0x1 0 0 + 0xa000 0x0 0x0 0x2 &mpic 0x1 0x1 0 0 + 0xa000 0x0 0x0 0x3 &mpic 0x2 0x1 0 0 + 0xa000 0x0 0x0 0x4 &mpic 0x3 0x1 0 0 + + /* IDSEL 0x15 (Slot 3) */ + 0xa800 0x0 0x0 0x1 &mpic 0x1 0x1 0 0 + 0xa800 0x0 0x0 0x2 &mpic 0x2 0x1 0 0 + 0xa800 0x0 0x0 0x3 &mpic 0x3 0x1 0 0 + 0xa800 0x0 0x0 0x4 &mpic 0x0 0x1 0 0 + + /* IDSEL 0x16 (Slot 4) */ + 0xb000 0x0 0x0 0x1 &mpic 0x2 0x1 0 0 + 0xb000 0x0 0x0 0x2 &mpic 0x3 0x1 0 0 + 0xb000 0x0 0x0 0x3 &mpic 0x0 0x1 0 0 + 0xb000 0x0 0x0 0x4 &mpic 0x1 0x1 0 0 + + /* IDSEL 0x18 (Slot 5) */ + 0xc000 0x0 0x0 0x1 &mpic 0x0 0x1 0 0 + 0xc000 0x0 0x0 0x2 &mpic 0x1 0x1 0 0 + 0xc000 0x0 0x0 0x3 &mpic 0x2 0x1 0 0 + 0xc000 0x0 0x0 0x4 &mpic 0x3 0x1 0 0 + + /* IDSEL 0x1C (Tsi310 bridge PCI primary) */ + 0xe000 0x0 0x0 0x1 &mpic 0x0 0x1 0 0 + 0xe000 0x0 0x0 0x2 &mpic 0x1 0x1 0 0 + 0xe000 0x0 0x0 0x3 &mpic 0x2 0x1 0 0 + 0xe000 0x0 0x0 0x4 &mpic 0x3 0x1 0 0>; + + pci_bridge@1c { + interrupt-map-mask = <0xf800 0x0 0x0 0x7>; + interrupt-map = < + + /* IDSEL 0x00 (PrPMC Site) */ + 0000 0x0 0x0 0x1 &mpic 0x0 0x1 0 0 + 0000 0x0 0x0 0x2 &mpic 0x1 0x1 0 0 + 0000 0x0 0x0 0x3 &mpic 0x2 0x1 0 0 + 0000 0x0 0x0 0x4 &mpic 0x3 0x1 0 0 + + /* IDSEL 0x04 (VIA chip) */ + 0x2000 0x0 0x0 0x1 &mpic 0x0 0x1 0 0 + 0x2000 0x0 0x0 0x2 &mpic 0x1 0x1 0 0 + 0x2000 0x0 0x0 0x3 &mpic 0x2 0x1 0 0 + 0x2000 0x0 0x0 0x4 &mpic 0x3 0x1 0 0 + + /* IDSEL 0x05 (8139) */ + 0x2800 0x0 0x0 0x1 &mpic 0x1 0x1 0 0 + + /* IDSEL 0x06 (Slot 6) */ + 0x3000 0x0 0x0 0x1 &mpic 0x2 0x1 0 0 + 0x3000 0x0 0x0 0x2 &mpic 0x3 0x1 0 0 + 0x3000 0x0 0x0 0x3 &mpic 0x0 0x1 0 0 + 0x3000 0x0 0x0 0x4 &mpic 0x1 0x1 0 0 + + /* IDESL 0x07 (Slot 7) */ + 0x3800 0x0 0x0 0x1 &mpic 0x3 0x1 0 0 + 0x3800 0x0 0x0 0x2 &mpic 0x0 0x1 0 0 + 0x3800 0x0 0x0 0x3 &mpic 0x1 0x1 0 0 + 0x3800 0x0 0x0 0x4 &mpic 0x2 0x1 0 0>; + + reg = <0xe000 0x0 0x0 0x0 0x0>; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + ranges = <0x2000000 0x0 0x80000000 + 0x2000000 0x0 0x80000000 + 0x0 0x20000000 + 0x1000000 0x0 0x0 + 0x1000000 0x0 0x0 + 0x0 0x80000>; + clock-frequency = <33333333>; + + isa@4 { + device_type = "isa"; + #interrupt-cells = <2>; + #size-cells = <1>; + #address-cells = <2>; + reg = <0x2000 0x0 0x0 0x0 0x0>; + ranges = <0x1 0x0 0x1000000 0x0 0x0 0x1000>; + interrupt-parent = <&i8259>; + + i8259: interrupt-controller@20 { + interrupt-controller; + device_type = "interrupt-controller"; + reg = <0x1 0x20 0x2 + 0x1 0xa0 0x2 + 0x1 0x4d0 0x2>; + #address-cells = <0>; + #interrupt-cells = <2>; + compatible = "chrp,iic"; + interrupts = <0 1 0 0>; + interrupt-parent = <&mpic>; + }; + + rtc@70 { + compatible = "pnpPNP,b00"; + reg = <0x1 0x70 0x2>; + }; + }; + }; +}; diff --git a/arch/powerpc/boot/dts/mpc8548cds_32b.dts b/arch/powerpc/boot/dts/mpc8548cds_32b.dts new file mode 100644 index 000000000..6fd63163f --- /dev/null +++ b/arch/powerpc/boot/dts/mpc8548cds_32b.dts @@ -0,0 +1,86 @@ +/* + * MPC8548 CDS Device Tree Source (32-bit address map) + * + * Copyright 2006, 2008, 2011-2012 Freescale Semiconductor Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +/include/ "fsl/mpc8548si-pre.dtsi" + +/ { + model = "MPC8548CDS"; + compatible = "MPC8548CDS", "MPC85xxCDS"; + + memory { + device_type = "memory"; + reg = <0 0 0x0 0x8000000>; // 128M at 0x0 + }; + + board_lbc: lbc: localbus@e0005000 { + reg = <0 0xe0005000 0 0x1000>; + + ranges = <0x0 0x0 0x0 0xff000000 0x01000000 + 0x1 0x0 0x0 0xf8004000 0x00001000>; + + }; + + board_soc: soc: soc8548@e0000000 { + ranges = <0 0x0 0xe0000000 0x100000>; + }; + + board_pci0: pci0: pci@e0008000 { + reg = <0 0xe0008000 0 0x1000>; + ranges = <0x2000000 0x0 0x80000000 0 0x80000000 0x0 0x10000000 + 0x1000000 0x0 0x00000000 0 0xe2000000 0x0 0x800000>; + clock-frequency = <66666666>; + }; + + pci1: pci@e0009000 { + reg = <0 0xe0009000 0 0x1000>; + ranges = <0x2000000 0x0 0x90000000 0 0x90000000 0x0 0x10000000 + 0x1000000 0x0 0x00000000 0 0xe2800000 0x0 0x800000>; + clock-frequency = <66666666>; + interrupt-map-mask = <0xf800 0x0 0x0 0x7>; + interrupt-map = < + + /* IDSEL 0x15 */ + 0xa800 0x0 0x0 0x1 &mpic 0xb 0x1 0 0 + 0xa800 0x0 0x0 0x2 &mpic 0x1 0x1 0 0 + 0xa800 0x0 0x0 0x3 &mpic 0x2 0x1 0 0 + 0xa800 0x0 0x0 0x4 &mpic 0x3 0x1 0 0>; + }; + + pci2: pcie@e000a000 { + reg = <0 0xe000a000 0 0x1000>; + ranges = <0x2000000 0x0 0xa0000000 0 0xa0000000 0x0 0x20000000 + 0x1000000 0x0 0x00000000 0 0xe3000000 0x0 0x100000>; + pcie@0 { + ranges = <0x2000000 0x0 0xa0000000 + 0x2000000 0x0 0xa0000000 + 0x0 0x20000000 + + 0x1000000 0x0 0x0 + 0x1000000 0x0 0x0 + 0x0 0x100000>; + }; + }; + + rio: rapidio@e00c0000 { + reg = <0x0 0xe00c0000 0x0 0x20000>; + port1 { + ranges = <0x0 0x0 0x0 0xc0000000 0x0 0x20000000>; + }; + }; +}; + +/* + * mpc8548cds.dtsi must be last to ensure board_pci0 overrides pci0 settings + * for interrupt-map & interrupt-map-mask. + */ + +/include/ "fsl/mpc8548si-post.dtsi" +/include/ "mpc8548cds.dtsi" diff --git a/arch/powerpc/boot/dts/mpc8548cds_36b.dts b/arch/powerpc/boot/dts/mpc8548cds_36b.dts new file mode 100644 index 000000000..10e551b11 --- /dev/null +++ b/arch/powerpc/boot/dts/mpc8548cds_36b.dts @@ -0,0 +1,86 @@ +/* + * MPC8548 CDS Device Tree Source (36-bit address map) + * + * Copyright 2012 Freescale Semiconductor Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +/include/ "fsl/mpc8548si-pre.dtsi" + +/ { + model = "MPC8548CDS"; + compatible = "MPC8548CDS", "MPC85xxCDS"; + + memory { + device_type = "memory"; + reg = <0 0 0x0 0x8000000>; // 128M at 0x0 + }; + + board_lbc: lbc: localbus@fe0005000 { + reg = <0xf 0xe0005000 0 0x1000>; + + ranges = <0x0 0x0 0xf 0xff000000 0x01000000 + 0x1 0x0 0xf 0xf8004000 0x00001000>; + + }; + + board_soc: soc: soc8548@fe0000000 { + ranges = <0 0xf 0xe0000000 0x100000>; + }; + + board_pci0: pci0: pci@fe0008000 { + reg = <0xf 0xe0008000 0 0x1000>; + ranges = <0x2000000 0x0 0xe0000000 0xc 0x00000000 0x0 0x10000000 + 0x1000000 0x0 0x00000000 0xf 0xe2000000 0x0 0x800000>; + clock-frequency = <66666666>; + }; + + pci1: pci@fe0009000 { + reg = <0xf 0xe0009000 0 0x1000>; + ranges = <0x2000000 0x0 0xe0000000 0xc 0x10000000 0x0 0x10000000 + 0x1000000 0x0 0x00000000 0xf 0xe2800000 0x0 0x800000>; + clock-frequency = <66666666>; + interrupt-map-mask = <0xf800 0x0 0x0 0x7>; + interrupt-map = < + + /* IDSEL 0x15 */ + 0xa800 0x0 0x0 0x1 &mpic 0xb 0x1 0 0 + 0xa800 0x0 0x0 0x2 &mpic 0x1 0x1 0 0 + 0xa800 0x0 0x0 0x3 &mpic 0x2 0x1 0 0 + 0xa800 0x0 0x0 0x4 &mpic 0x3 0x1 0 0>; + }; + + pci2: pcie@fe000a000 { + reg = <0xf 0xe000a000 0 0x1000>; + ranges = <0x2000000 0x0 0xe0000000 0xc 0x20000000 0x0 0x20000000 + 0x1000000 0x0 0x00000000 0xf 0xe3000000 0x0 0x100000>; + pcie@0 { + ranges = <0x2000000 0x0 0xa0000000 + 0x2000000 0x0 0xa0000000 + 0x0 0x20000000 + + 0x1000000 0x0 0x0 + 0x1000000 0x0 0x0 + 0x0 0x100000>; + }; + }; + + rio: rapidio@fe00c0000 { + reg = <0xf 0xe00c0000 0x0 0x20000>; + port1 { + ranges = <0x0 0x0 0xc 0x40000000 0x0 0x20000000>; + }; + }; +}; + +/* + * mpc8548cds.dtsi must be last to ensure board_pci0 overrides pci0 settings + * for interrupt-map & interrupt-map-mask. + */ + +/include/ "fsl/mpc8548si-post.dtsi" +/include/ "mpc8548cds.dtsi" diff --git a/arch/powerpc/boot/dts/mpc8555cds.dts b/arch/powerpc/boot/dts/mpc8555cds.dts new file mode 100644 index 000000000..f115f21cb --- /dev/null +++ b/arch/powerpc/boot/dts/mpc8555cds.dts @@ -0,0 +1,379 @@ +/* + * MPC8555 CDS Device Tree Source + * + * Copyright 2006, 2008 Freescale Semiconductor Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +/dts-v1/; + +/include/ "fsl/e500v2_power_isa.dtsi" + +/ { + model = "MPC8555CDS"; + compatible = "MPC8555CDS", "MPC85xxCDS"; + #address-cells = <1>; + #size-cells = <1>; + + aliases { + ethernet0 = &enet0; + ethernet1 = &enet1; + serial0 = &serial0; + serial1 = &serial1; + pci0 = &pci0; + pci1 = &pci1; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + PowerPC,8555@0 { + device_type = "cpu"; + reg = <0x0>; + d-cache-line-size = <32>; // 32 bytes + i-cache-line-size = <32>; // 32 bytes + d-cache-size = <0x8000>; // L1, 32K + i-cache-size = <0x8000>; // L1, 32K + timebase-frequency = <0>; // 33 MHz, from uboot + bus-frequency = <0>; // 166 MHz + clock-frequency = <0>; // 825 MHz, from uboot + next-level-cache = <&L2>; + }; + }; + + memory { + device_type = "memory"; + reg = <0x0 0x8000000>; // 128M at 0x0 + }; + + soc8555@e0000000 { + #address-cells = <1>; + #size-cells = <1>; + device_type = "soc"; + compatible = "simple-bus"; + ranges = <0x0 0xe0000000 0x100000>; + bus-frequency = <0>; + + ecm-law@0 { + compatible = "fsl,ecm-law"; + reg = <0x0 0x1000>; + fsl,num-laws = <8>; + }; + + ecm@1000 { + compatible = "fsl,mpc8555-ecm", "fsl,ecm"; + reg = <0x1000 0x1000>; + interrupts = <17 2>; + interrupt-parent = <&mpic>; + }; + + memory-controller@2000 { + compatible = "fsl,mpc8555-memory-controller"; + reg = <0x2000 0x1000>; + interrupt-parent = <&mpic>; + interrupts = <18 2>; + }; + + L2: l2-cache-controller@20000 { + compatible = "fsl,mpc8555-l2-cache-controller"; + reg = <0x20000 0x1000>; + cache-line-size = <32>; // 32 bytes + cache-size = <0x40000>; // L2, 256K + interrupt-parent = <&mpic>; + interrupts = <16 2>; + }; + + i2c@3000 { + #address-cells = <1>; + #size-cells = <0>; + cell-index = <0>; + compatible = "fsl-i2c"; + reg = <0x3000 0x100>; + interrupts = <43 2>; + interrupt-parent = <&mpic>; + dfsrr; + }; + + dma@21300 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,mpc8555-dma", "fsl,eloplus-dma"; + reg = <0x21300 0x4>; + ranges = <0x0 0x21100 0x200>; + cell-index = <0>; + dma-channel@0 { + compatible = "fsl,mpc8555-dma-channel", + "fsl,eloplus-dma-channel"; + reg = <0x0 0x80>; + cell-index = <0>; + interrupt-parent = <&mpic>; + interrupts = <20 2>; + }; + dma-channel@80 { + compatible = "fsl,mpc8555-dma-channel", + "fsl,eloplus-dma-channel"; + reg = <0x80 0x80>; + cell-index = <1>; + interrupt-parent = <&mpic>; + interrupts = <21 2>; + }; + dma-channel@100 { + compatible = "fsl,mpc8555-dma-channel", + "fsl,eloplus-dma-channel"; + reg = <0x100 0x80>; + cell-index = <2>; + interrupt-parent = <&mpic>; + interrupts = <22 2>; + }; + dma-channel@180 { + compatible = "fsl,mpc8555-dma-channel", + "fsl,eloplus-dma-channel"; + reg = <0x180 0x80>; + cell-index = <3>; + interrupt-parent = <&mpic>; + interrupts = <23 2>; + }; + }; + + enet0: ethernet@24000 { + #address-cells = <1>; + #size-cells = <1>; + cell-index = <0>; + device_type = "network"; + model = "TSEC"; + compatible = "gianfar"; + reg = <0x24000 0x1000>; + ranges = <0x0 0x24000 0x1000>; + local-mac-address = [ 00 00 00 00 00 00 ]; + interrupts = <29 2 30 2 34 2>; + interrupt-parent = <&mpic>; + tbi-handle = <&tbi0>; + phy-handle = <&phy0>; + + mdio@520 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,gianfar-mdio"; + reg = <0x520 0x20>; + + phy0: ethernet-phy@0 { + interrupt-parent = <&mpic>; + interrupts = <5 1>; + reg = <0x0>; + }; + phy1: ethernet-phy@1 { + interrupt-parent = <&mpic>; + interrupts = <5 1>; + reg = <0x1>; + }; + tbi0: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + }; + + enet1: ethernet@25000 { + #address-cells = <1>; + #size-cells = <1>; + cell-index = <1>; + device_type = "network"; + model = "TSEC"; + compatible = "gianfar"; + reg = <0x25000 0x1000>; + ranges = <0x0 0x25000 0x1000>; + local-mac-address = [ 00 00 00 00 00 00 ]; + interrupts = <35 2 36 2 40 2>; + interrupt-parent = <&mpic>; + tbi-handle = <&tbi1>; + phy-handle = <&phy1>; + + mdio@520 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,gianfar-tbi"; + reg = <0x520 0x20>; + + tbi1: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + }; + + serial0: serial@4500 { + cell-index = <0>; + device_type = "serial"; + compatible = "fsl,ns16550", "ns16550"; + reg = <0x4500 0x100>; // reg base, size + clock-frequency = <0>; // should we fill in in uboot? + interrupts = <42 2>; + interrupt-parent = <&mpic>; + }; + + serial1: serial@4600 { + cell-index = <1>; + device_type = "serial"; + compatible = "fsl,ns16550", "ns16550"; + reg = <0x4600 0x100>; // reg base, size + clock-frequency = <0>; // should we fill in in uboot? + interrupts = <42 2>; + interrupt-parent = <&mpic>; + }; + + crypto@30000 { + compatible = "fsl,sec2.0"; + reg = <0x30000 0x10000>; + interrupts = <45 2>; + interrupt-parent = <&mpic>; + fsl,num-channels = <4>; + fsl,channel-fifo-len = <24>; + fsl,exec-units-mask = <0x7e>; + fsl,descriptor-types-mask = <0x01010ebf>; + }; + + mpic: pic@40000 { + interrupt-controller; + #address-cells = <0>; + #interrupt-cells = <2>; + reg = <0x40000 0x40000>; + compatible = "chrp,open-pic"; + device_type = "open-pic"; + }; + + cpm@919c0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,mpc8555-cpm", "fsl,cpm2"; + reg = <0x919c0 0x30>; + ranges; + + muram@80000 { + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x80000 0x10000>; + + data@0 { + compatible = "fsl,cpm-muram-data"; + reg = <0x0 0x2000 0x9000 0x1000>; + }; + }; + + brg@919f0 { + compatible = "fsl,mpc8555-brg", + "fsl,cpm2-brg", + "fsl,cpm-brg"; + reg = <0x919f0 0x10 0x915f0 0x10>; + }; + + cpmpic: pic@90c00 { + interrupt-controller; + #address-cells = <0>; + #interrupt-cells = <2>; + interrupts = <46 2>; + interrupt-parent = <&mpic>; + reg = <0x90c00 0x80>; + compatible = "fsl,mpc8555-cpm-pic", "fsl,cpm2-pic"; + }; + }; + }; + + pci0: pci@e0008000 { + interrupt-map-mask = <0x1f800 0x0 0x0 0x7>; + interrupt-map = < + + /* IDSEL 0x10 */ + 0x8000 0x0 0x0 0x1 &mpic 0x0 0x1 + 0x8000 0x0 0x0 0x2 &mpic 0x1 0x1 + 0x8000 0x0 0x0 0x3 &mpic 0x2 0x1 + 0x8000 0x0 0x0 0x4 &mpic 0x3 0x1 + + /* IDSEL 0x11 */ + 0x8800 0x0 0x0 0x1 &mpic 0x0 0x1 + 0x8800 0x0 0x0 0x2 &mpic 0x1 0x1 + 0x8800 0x0 0x0 0x3 &mpic 0x2 0x1 + 0x8800 0x0 0x0 0x4 &mpic 0x3 0x1 + + /* IDSEL 0x12 (Slot 1) */ + 0x9000 0x0 0x0 0x1 &mpic 0x0 0x1 + 0x9000 0x0 0x0 0x2 &mpic 0x1 0x1 + 0x9000 0x0 0x0 0x3 &mpic 0x2 0x1 + 0x9000 0x0 0x0 0x4 &mpic 0x3 0x1 + + /* IDSEL 0x13 (Slot 2) */ + 0x9800 0x0 0x0 0x1 &mpic 0x1 0x1 + 0x9800 0x0 0x0 0x2 &mpic 0x2 0x1 + 0x9800 0x0 0x0 0x3 &mpic 0x3 0x1 + 0x9800 0x0 0x0 0x4 &mpic 0x0 0x1 + + /* IDSEL 0x14 (Slot 3) */ + 0xa000 0x0 0x0 0x1 &mpic 0x2 0x1 + 0xa000 0x0 0x0 0x2 &mpic 0x3 0x1 + 0xa000 0x0 0x0 0x3 &mpic 0x0 0x1 + 0xa000 0x0 0x0 0x4 &mpic 0x1 0x1 + + /* IDSEL 0x15 (Slot 4) */ + 0xa800 0x0 0x0 0x1 &mpic 0x3 0x1 + 0xa800 0x0 0x0 0x2 &mpic 0x0 0x1 + 0xa800 0x0 0x0 0x3 &mpic 0x1 0x1 + 0xa800 0x0 0x0 0x4 &mpic 0x2 0x1 + + /* Bus 1 (Tundra Bridge) */ + /* IDSEL 0x12 (ISA bridge) */ + 0x19000 0x0 0x0 0x1 &mpic 0x0 0x1 + 0x19000 0x0 0x0 0x2 &mpic 0x1 0x1 + 0x19000 0x0 0x0 0x3 &mpic 0x2 0x1 + 0x19000 0x0 0x0 0x4 &mpic 0x3 0x1>; + interrupt-parent = <&mpic>; + interrupts = <24 2>; + bus-range = <0 0>; + ranges = <0x2000000 0x0 0x80000000 0x80000000 0x0 0x20000000 + 0x1000000 0x0 0x0 0xe2000000 0x0 0x100000>; + clock-frequency = <66666666>; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + reg = <0xe0008000 0x1000>; + compatible = "fsl,mpc8540-pci"; + device_type = "pci"; + + i8259@19000 { + interrupt-controller; + device_type = "interrupt-controller"; + reg = <0x19000 0x0 0x0 0x0 0x1>; + #address-cells = <0>; + #interrupt-cells = <2>; + compatible = "chrp,iic"; + interrupts = <1>; + interrupt-parent = <&pci0>; + }; + }; + + pci1: pci@e0009000 { + interrupt-map-mask = <0xf800 0x0 0x0 0x7>; + interrupt-map = < + + /* IDSEL 0x15 */ + 0xa800 0x0 0x0 0x1 &mpic 0xb 0x1 + 0xa800 0x0 0x0 0x2 &mpic 0xb 0x1 + 0xa800 0x0 0x0 0x3 &mpic 0xb 0x1 + 0xa800 0x0 0x0 0x4 &mpic 0xb 0x1>; + interrupt-parent = <&mpic>; + interrupts = <25 2>; + bus-range = <0 0>; + ranges = <0x2000000 0x0 0xa0000000 0xa0000000 0x0 0x20000000 + 0x1000000 0x0 0x0 0xe3000000 0x0 0x100000>; + clock-frequency = <66666666>; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + reg = <0xe0009000 0x1000>; + compatible = "fsl,mpc8540-pci"; + device_type = "pci"; + }; +}; diff --git a/arch/powerpc/boot/dts/mpc8560ads.dts b/arch/powerpc/boot/dts/mpc8560ads.dts new file mode 100644 index 000000000..0d70921d6 --- /dev/null +++ b/arch/powerpc/boot/dts/mpc8560ads.dts @@ -0,0 +1,392 @@ +/* + * MPC8560 ADS Device Tree Source + * + * Copyright 2006, 2008 Freescale Semiconductor Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +/dts-v1/; + +/include/ "fsl/e500v2_power_isa.dtsi" + +/ { + model = "MPC8560ADS"; + compatible = "MPC8560ADS", "MPC85xxADS"; + #address-cells = <1>; + #size-cells = <1>; + + aliases { + ethernet0 = &enet0; + ethernet1 = &enet1; + ethernet2 = &enet2; + ethernet3 = &enet3; + serial0 = &serial0; + serial1 = &serial1; + pci0 = &pci0; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + PowerPC,8560@0 { + device_type = "cpu"; + reg = <0x0>; + d-cache-line-size = <32>; // 32 bytes + i-cache-line-size = <32>; // 32 bytes + d-cache-size = <0x8000>; // L1, 32K + i-cache-size = <0x8000>; // L1, 32K + timebase-frequency = <82500000>; + bus-frequency = <330000000>; + clock-frequency = <825000000>; + }; + }; + + memory { + device_type = "memory"; + reg = <0x0 0x10000000>; + }; + + soc8560@e0000000 { + #address-cells = <1>; + #size-cells = <1>; + device_type = "soc"; + compatible = "simple-bus"; + ranges = <0x0 0xe0000000 0x100000>; + bus-frequency = <330000000>; + + ecm-law@0 { + compatible = "fsl,ecm-law"; + reg = <0x0 0x1000>; + fsl,num-laws = <8>; + }; + + ecm@1000 { + compatible = "fsl,mpc8560-ecm", "fsl,ecm"; + reg = <0x1000 0x1000>; + interrupts = <17 2>; + interrupt-parent = <&mpic>; + }; + + memory-controller@2000 { + compatible = "fsl,mpc8540-memory-controller"; + reg = <0x2000 0x1000>; + interrupt-parent = <&mpic>; + interrupts = <18 2>; + }; + + L2: l2-cache-controller@20000 { + compatible = "fsl,mpc8540-l2-cache-controller"; + reg = <0x20000 0x1000>; + cache-line-size = <32>; // 32 bytes + cache-size = <0x40000>; // L2, 256K + interrupt-parent = <&mpic>; + interrupts = <16 2>; + }; + + dma@21300 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,mpc8560-dma", "fsl,eloplus-dma"; + reg = <0x21300 0x4>; + ranges = <0x0 0x21100 0x200>; + cell-index = <0>; + dma-channel@0 { + compatible = "fsl,mpc8560-dma-channel", + "fsl,eloplus-dma-channel"; + reg = <0x0 0x80>; + cell-index = <0>; + interrupt-parent = <&mpic>; + interrupts = <20 2>; + }; + dma-channel@80 { + compatible = "fsl,mpc8560-dma-channel", + "fsl,eloplus-dma-channel"; + reg = <0x80 0x80>; + cell-index = <1>; + interrupt-parent = <&mpic>; + interrupts = <21 2>; + }; + dma-channel@100 { + compatible = "fsl,mpc8560-dma-channel", + "fsl,eloplus-dma-channel"; + reg = <0x100 0x80>; + cell-index = <2>; + interrupt-parent = <&mpic>; + interrupts = <22 2>; + }; + dma-channel@180 { + compatible = "fsl,mpc8560-dma-channel", + "fsl,eloplus-dma-channel"; + reg = <0x180 0x80>; + cell-index = <3>; + interrupt-parent = <&mpic>; + interrupts = <23 2>; + }; + }; + + enet0: ethernet@24000 { + #address-cells = <1>; + #size-cells = <1>; + cell-index = <0>; + device_type = "network"; + model = "TSEC"; + compatible = "gianfar"; + reg = <0x24000 0x1000>; + ranges = <0x0 0x24000 0x1000>; + local-mac-address = [ 00 00 00 00 00 00 ]; + interrupts = <29 2 30 2 34 2>; + interrupt-parent = <&mpic>; + tbi-handle = <&tbi0>; + phy-handle = <&phy0>; + + mdio@520 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,gianfar-mdio"; + reg = <0x520 0x20>; + + phy0: ethernet-phy@0 { + interrupt-parent = <&mpic>; + interrupts = <5 1>; + reg = <0x0>; + }; + phy1: ethernet-phy@1 { + interrupt-parent = <&mpic>; + interrupts = <5 1>; + reg = <0x1>; + }; + phy2: ethernet-phy@2 { + interrupt-parent = <&mpic>; + interrupts = <7 1>; + reg = <0x2>; + }; + phy3: ethernet-phy@3 { + interrupt-parent = <&mpic>; + interrupts = <7 1>; + reg = <0x3>; + }; + tbi0: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + }; + + enet1: ethernet@25000 { + #address-cells = <1>; + #size-cells = <1>; + cell-index = <1>; + device_type = "network"; + model = "TSEC"; + compatible = "gianfar"; + reg = <0x25000 0x1000>; + ranges = <0x0 0x25000 0x1000>; + local-mac-address = [ 00 00 00 00 00 00 ]; + interrupts = <35 2 36 2 40 2>; + interrupt-parent = <&mpic>; + tbi-handle = <&tbi1>; + phy-handle = <&phy1>; + + mdio@520 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,gianfar-tbi"; + reg = <0x520 0x20>; + + tbi1: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + }; + + mpic: pic@40000 { + interrupt-controller; + #address-cells = <0>; + #interrupt-cells = <2>; + reg = <0x40000 0x40000>; + compatible = "chrp,open-pic"; + device_type = "open-pic"; + }; + + cpm@919c0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,mpc8560-cpm", "fsl,cpm2"; + reg = <0x919c0 0x30>; + ranges; + + muram@80000 { + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x80000 0x10000>; + + data@0 { + compatible = "fsl,cpm-muram-data"; + reg = <0x0 0x4000 0x9000 0x2000>; + }; + }; + + brg@919f0 { + compatible = "fsl,mpc8560-brg", + "fsl,cpm2-brg", + "fsl,cpm-brg"; + reg = <0x919f0 0x10 0x915f0 0x10>; + clock-frequency = <165000000>; + }; + + cpmpic: pic@90c00 { + interrupt-controller; + #address-cells = <0>; + #interrupt-cells = <2>; + interrupts = <46 2>; + interrupt-parent = <&mpic>; + reg = <0x90c00 0x80>; + compatible = "fsl,mpc8560-cpm-pic", "fsl,cpm2-pic"; + }; + + serial0: serial@91a00 { + device_type = "serial"; + compatible = "fsl,mpc8560-scc-uart", + "fsl,cpm2-scc-uart"; + reg = <0x91a00 0x20 0x88000 0x100>; + fsl,cpm-brg = <1>; + fsl,cpm-command = <0x800000>; + current-speed = <115200>; + interrupts = <40 8>; + interrupt-parent = <&cpmpic>; + }; + + serial1: serial@91a20 { + device_type = "serial"; + compatible = "fsl,mpc8560-scc-uart", + "fsl,cpm2-scc-uart"; + reg = <0x91a20 0x20 0x88100 0x100>; + fsl,cpm-brg = <2>; + fsl,cpm-command = <0x4a00000>; + current-speed = <115200>; + interrupts = <41 8>; + interrupt-parent = <&cpmpic>; + }; + + enet2: ethernet@91320 { + device_type = "network"; + compatible = "fsl,mpc8560-fcc-enet", + "fsl,cpm2-fcc-enet"; + reg = <0x91320 0x20 0x88500 0x100 0x913b0 0x1>; + local-mac-address = [ 00 00 00 00 00 00 ]; + fsl,cpm-command = <0x16200300>; + interrupts = <33 8>; + interrupt-parent = <&cpmpic>; + phy-handle = <&phy2>; + }; + + enet3: ethernet@91340 { + device_type = "network"; + compatible = "fsl,mpc8560-fcc-enet", + "fsl,cpm2-fcc-enet"; + reg = <0x91340 0x20 0x88600 0x100 0x913d0 0x1>; + local-mac-address = [ 00 00 00 00 00 00 ]; + fsl,cpm-command = <0x1a400300>; + interrupts = <34 8>; + interrupt-parent = <&cpmpic>; + phy-handle = <&phy3>; + }; + }; + }; + + pci0: pci@e0008000 { + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + compatible = "fsl,mpc8540-pcix", "fsl,mpc8540-pci"; + device_type = "pci"; + reg = <0xe0008000 0x1000>; + clock-frequency = <66666666>; + interrupt-map-mask = <0xf800 0x0 0x0 0x7>; + interrupt-map = < + + /* IDSEL 0x2 */ + 0x1000 0x0 0x0 0x1 &mpic 0x1 0x1 + 0x1000 0x0 0x0 0x2 &mpic 0x2 0x1 + 0x1000 0x0 0x0 0x3 &mpic 0x3 0x1 + 0x1000 0x0 0x0 0x4 &mpic 0x4 0x1 + + /* IDSEL 0x3 */ + 0x1800 0x0 0x0 0x1 &mpic 0x4 0x1 + 0x1800 0x0 0x0 0x2 &mpic 0x1 0x1 + 0x1800 0x0 0x0 0x3 &mpic 0x2 0x1 + 0x1800 0x0 0x0 0x4 &mpic 0x3 0x1 + + /* IDSEL 0x4 */ + 0x2000 0x0 0x0 0x1 &mpic 0x3 0x1 + 0x2000 0x0 0x0 0x2 &mpic 0x4 0x1 + 0x2000 0x0 0x0 0x3 &mpic 0x1 0x1 + 0x2000 0x0 0x0 0x4 &mpic 0x2 0x1 + + /* IDSEL 0x5 */ + 0x2800 0x0 0x0 0x1 &mpic 0x2 0x1 + 0x2800 0x0 0x0 0x2 &mpic 0x3 0x1 + 0x2800 0x0 0x0 0x3 &mpic 0x4 0x1 + 0x2800 0x0 0x0 0x4 &mpic 0x1 0x1 + + /* IDSEL 12 */ + 0x6000 0x0 0x0 0x1 &mpic 0x1 0x1 + 0x6000 0x0 0x0 0x2 &mpic 0x2 0x1 + 0x6000 0x0 0x0 0x3 &mpic 0x3 0x1 + 0x6000 0x0 0x0 0x4 &mpic 0x4 0x1 + + /* IDSEL 13 */ + 0x6800 0x0 0x0 0x1 &mpic 0x4 0x1 + 0x6800 0x0 0x0 0x2 &mpic 0x1 0x1 + 0x6800 0x0 0x0 0x3 &mpic 0x2 0x1 + 0x6800 0x0 0x0 0x4 &mpic 0x3 0x1 + + /* IDSEL 14*/ + 0x7000 0x0 0x0 0x1 &mpic 0x3 0x1 + 0x7000 0x0 0x0 0x2 &mpic 0x4 0x1 + 0x7000 0x0 0x0 0x3 &mpic 0x1 0x1 + 0x7000 0x0 0x0 0x4 &mpic 0x2 0x1 + + /* IDSEL 15 */ + 0x7800 0x0 0x0 0x1 &mpic 0x2 0x1 + 0x7800 0x0 0x0 0x2 &mpic 0x3 0x1 + 0x7800 0x0 0x0 0x3 &mpic 0x4 0x1 + 0x7800 0x0 0x0 0x4 &mpic 0x1 0x1 + + /* IDSEL 18 */ + 0x9000 0x0 0x0 0x1 &mpic 0x1 0x1 + 0x9000 0x0 0x0 0x2 &mpic 0x2 0x1 + 0x9000 0x0 0x0 0x3 &mpic 0x3 0x1 + 0x9000 0x0 0x0 0x4 &mpic 0x4 0x1 + + /* IDSEL 19 */ + 0x9800 0x0 0x0 0x1 &mpic 0x4 0x1 + 0x9800 0x0 0x0 0x2 &mpic 0x1 0x1 + 0x9800 0x0 0x0 0x3 &mpic 0x2 0x1 + 0x9800 0x0 0x0 0x4 &mpic 0x3 0x1 + + /* IDSEL 20 */ + 0xa000 0x0 0x0 0x1 &mpic 0x3 0x1 + 0xa000 0x0 0x0 0x2 &mpic 0x4 0x1 + 0xa000 0x0 0x0 0x3 &mpic 0x1 0x1 + 0xa000 0x0 0x0 0x4 &mpic 0x2 0x1 + + /* IDSEL 21 */ + 0xa800 0x0 0x0 0x1 &mpic 0x2 0x1 + 0xa800 0x0 0x0 0x2 &mpic 0x3 0x1 + 0xa800 0x0 0x0 0x3 &mpic 0x4 0x1 + 0xa800 0x0 0x0 0x4 &mpic 0x1 0x1>; + + interrupt-parent = <&mpic>; + interrupts = <24 2>; + bus-range = <0 0>; + ranges = <0x2000000 0x0 0x80000000 0x80000000 0x0 0x20000000 + 0x1000000 0x0 0x0 0xe2000000 0x0 0x1000000>; + }; +}; diff --git a/arch/powerpc/boot/dts/mpc8568mds.dts b/arch/powerpc/boot/dts/mpc8568mds.dts new file mode 100644 index 000000000..bead2b655 --- /dev/null +++ b/arch/powerpc/boot/dts/mpc8568mds.dts @@ -0,0 +1,314 @@ +/* + * MPC8568E MDS Device Tree Source + * + * Copyright 2007, 2008 Freescale Semiconductor Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +/include/ "fsl/mpc8568si-pre.dtsi" + +/ { + model = "MPC8568EMDS"; + compatible = "MPC8568EMDS", "MPC85xxMDS"; + + aliases { + pci0 = &pci0; + pci1 = &pci1; + rapidio0 = &rio; + }; + + memory { + device_type = "memory"; + reg = <0x0 0x0 0x0 0x0>; + }; + + lbc: localbus@e0005000 { + reg = <0x0 0xe0005000 0x0 0x1000>; + ranges = <0x0 0x0 0xfe000000 0x02000000 + 0x1 0x0 0xf8000000 0x00008000 + 0x2 0x0 0xf0000000 0x04000000 + 0x4 0x0 0xf8008000 0x00008000 + 0x5 0x0 0xf8010000 0x00008000>; + + nor@0,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "cfi-flash"; + reg = <0x0 0x0 0x02000000>; + bank-width = <2>; + device-width = <2>; + }; + + bcsr@1,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,mpc8568mds-bcsr"; + reg = <1 0 0x8000>; + ranges = <0 1 0 0x8000>; + + bcsr5: gpio-controller@11 { + #gpio-cells = <2>; + compatible = "fsl,mpc8568mds-bcsr-gpio"; + reg = <0x5 0x1>; + gpio-controller; + }; + }; + + pib@4,0 { + compatible = "fsl,mpc8568mds-pib"; + reg = <4 0 0x8000>; + }; + + pib@5,0 { + compatible = "fsl,mpc8568mds-pib"; + reg = <5 0 0x8000>; + }; + }; + + soc: soc8568@e0000000 { + ranges = <0x0 0x0 0xe0000000 0x100000>; + + i2c-sleep-nexus { + i2c@3000 { + rtc@68 { + compatible = "dallas,ds1374"; + reg = <0x68>; + interrupts = <3 1 0 0>; + }; + }; + }; + + enet0: ethernet@24000 { + tbi-handle = <&tbi0>; + phy-handle = <&phy2>; + }; + + mdio@24520 { + phy0: ethernet-phy@7 { + interrupts = <1 1 0 0>; + reg = <0x7>; + }; + phy1: ethernet-phy@1 { + interrupts = <2 1 0 0>; + reg = <0x1>; + }; + phy2: ethernet-phy@2 { + interrupts = <1 1 0 0>; + reg = <0x2>; + }; + phy3: ethernet-phy@3 { + interrupts = <2 1 0 0>; + reg = <0x3>; + }; + tbi0: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + + enet1: ethernet@25000 { + tbi-handle = <&tbi1>; + phy-handle = <&phy3>; + sleep = <&pmc 0x00000040>; + }; + + mdio@25520 { + tbi1: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + + par_io@e0100 { + num-ports = <7>; + + pio1: ucc_pin@01 { + pio-map = < + /* port pin dir open_drain assignment has_irq */ + 0x4 0xa 0x1 0x0 0x2 0x0 /* TxD0 */ + 0x4 0x9 0x1 0x0 0x2 0x0 /* TxD1 */ + 0x4 0x8 0x1 0x0 0x2 0x0 /* TxD2 */ + 0x4 0x7 0x1 0x0 0x2 0x0 /* TxD3 */ + 0x4 0x17 0x1 0x0 0x2 0x0 /* TxD4 */ + 0x4 0x16 0x1 0x0 0x2 0x0 /* TxD5 */ + 0x4 0x15 0x1 0x0 0x2 0x0 /* TxD6 */ + 0x4 0x14 0x1 0x0 0x2 0x0 /* TxD7 */ + 0x4 0xf 0x2 0x0 0x2 0x0 /* RxD0 */ + 0x4 0xe 0x2 0x0 0x2 0x0 /* RxD1 */ + 0x4 0xd 0x2 0x0 0x2 0x0 /* RxD2 */ + 0x4 0xc 0x2 0x0 0x2 0x0 /* RxD3 */ + 0x4 0x1d 0x2 0x0 0x2 0x0 /* RxD4 */ + 0x4 0x1c 0x2 0x0 0x2 0x0 /* RxD5 */ + 0x4 0x1b 0x2 0x0 0x2 0x0 /* RxD6 */ + 0x4 0x1a 0x2 0x0 0x2 0x0 /* RxD7 */ + 0x4 0xb 0x1 0x0 0x2 0x0 /* TX_EN */ + 0x4 0x18 0x1 0x0 0x2 0x0 /* TX_ER */ + 0x4 0x10 0x2 0x0 0x2 0x0 /* RX_DV */ + 0x4 0x1e 0x2 0x0 0x2 0x0 /* RX_ER */ + 0x4 0x11 0x2 0x0 0x2 0x0 /* RX_CLK */ + 0x4 0x13 0x1 0x0 0x2 0x0 /* GTX_CLK */ + 0x1 0x1f 0x2 0x0 0x3 0x0>; /* GTX125 */ + }; + + pio2: ucc_pin@02 { + pio-map = < + /* port pin dir open_drain assignment has_irq */ + 0x5 0xa 0x1 0x0 0x2 0x0 /* TxD0 */ + 0x5 0x9 0x1 0x0 0x2 0x0 /* TxD1 */ + 0x5 0x8 0x1 0x0 0x2 0x0 /* TxD2 */ + 0x5 0x7 0x1 0x0 0x2 0x0 /* TxD3 */ + 0x5 0x17 0x1 0x0 0x2 0x0 /* TxD4 */ + 0x5 0x16 0x1 0x0 0x2 0x0 /* TxD5 */ + 0x5 0x15 0x1 0x0 0x2 0x0 /* TxD6 */ + 0x5 0x14 0x1 0x0 0x2 0x0 /* TxD7 */ + 0x5 0xf 0x2 0x0 0x2 0x0 /* RxD0 */ + 0x5 0xe 0x2 0x0 0x2 0x0 /* RxD1 */ + 0x5 0xd 0x2 0x0 0x2 0x0 /* RxD2 */ + 0x5 0xc 0x2 0x0 0x2 0x0 /* RxD3 */ + 0x5 0x1d 0x2 0x0 0x2 0x0 /* RxD4 */ + 0x5 0x1c 0x2 0x0 0x2 0x0 /* RxD5 */ + 0x5 0x1b 0x2 0x0 0x2 0x0 /* RxD6 */ + 0x5 0x1a 0x2 0x0 0x2 0x0 /* RxD7 */ + 0x5 0xb 0x1 0x0 0x2 0x0 /* TX_EN */ + 0x5 0x18 0x1 0x0 0x2 0x0 /* TX_ER */ + 0x5 0x10 0x2 0x0 0x2 0x0 /* RX_DV */ + 0x5 0x1e 0x2 0x0 0x2 0x0 /* RX_ER */ + 0x5 0x11 0x2 0x0 0x2 0x0 /* RX_CLK */ + 0x5 0x13 0x1 0x0 0x2 0x0 /* GTX_CLK */ + 0x1 0x1f 0x2 0x0 0x3 0x0 /* GTX125 */ + 0x4 0x6 0x3 0x0 0x2 0x0 /* MDIO */ + 0x4 0x5 0x1 0x0 0x2 0x0>; /* MDC */ + }; + }; + }; + + qe: qe@e0080000 { + ranges = <0x0 0x0 0xe0080000 0x40000>; + reg = <0x0 0xe0080000 0x0 0x480>; + + spi@4c0 { + mode = "cpu"; + }; + + spi@500 { + mode = "cpu"; + }; + + enet2: ucc@2000 { + device_type = "network"; + compatible = "ucc_geth"; + local-mac-address = [ 00 00 00 00 00 00 ]; + rx-clock-name = "none"; + tx-clock-name = "clk16"; + pio-handle = <&pio1>; + phy-handle = <&phy0>; + phy-connection-type = "rgmii-id"; + }; + + enet3: ucc@3000 { + device_type = "network"; + compatible = "ucc_geth"; + local-mac-address = [ 00 00 00 00 00 00 ]; + rx-clock-name = "none"; + tx-clock-name = "clk16"; + pio-handle = <&pio2>; + phy-handle = <&phy1>; + phy-connection-type = "rgmii-id"; + }; + + mdio@2120 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x2120 0x18>; + compatible = "fsl,ucc-mdio"; + + /* These are the same PHYs as on + * gianfar's MDIO bus */ + qe_phy0: ethernet-phy@07 { + interrupt-parent = <&mpic>; + interrupts = <1 1 0 0>; + reg = <0x7>; + }; + qe_phy1: ethernet-phy@01 { + interrupt-parent = <&mpic>; + interrupts = <2 1 0 0>; + reg = <0x1>; + }; + qe_phy2: ethernet-phy@02 { + interrupt-parent = <&mpic>; + interrupts = <1 1 0 0>; + reg = <0x2>; + }; + qe_phy3: ethernet-phy@03 { + interrupt-parent = <&mpic>; + interrupts = <2 1 0 0>; + reg = <0x3>; + }; + }; + }; + + pci0: pci@e0008000 { + reg = <0x0 0xe0008000 0x0 0x1000>; + ranges = <0x2000000 0x0 0x80000000 0x0 0x80000000 0x0 0x20000000 + 0x1000000 0x0 0x00000000 0x0 0xe2000000 0x0 0x800000>; + clock-frequency = <66666666>; + interrupt-map-mask = <0xf800 0x0 0x0 0x7>; + interrupt-map = < + /* IDSEL 0x12 AD18 */ + 0x9000 0x0 0x0 0x1 &mpic 0x5 0x1 0 0 + 0x9000 0x0 0x0 0x2 &mpic 0x6 0x1 0 0 + 0x9000 0x0 0x0 0x3 &mpic 0x7 0x1 0 0 + 0x9000 0x0 0x0 0x4 &mpic 0x4 0x1 0 0 + + /* IDSEL 0x13 AD19 */ + 0x9800 0x0 0x0 0x1 &mpic 0x6 0x1 0 0 + 0x9800 0x0 0x0 0x2 &mpic 0x7 0x1 0 0 + 0x9800 0x0 0x0 0x3 &mpic 0x4 0x1 0 0 + 0x9800 0x0 0x0 0x4 &mpic 0x5 0x1 0 0>; + }; + + /* PCI Express */ + pci1: pcie@e000a000 { + ranges = <0x2000000 0x0 0xa0000000 0x0 0xa0000000 0x0 0x10000000 + 0x1000000 0x0 0x00000000 0x0 0xe2800000 0x0 0x800000>; + reg = <0x0 0xe000a000 0x0 0x1000>; + pcie@0 { + ranges = <0x2000000 0x0 0xa0000000 + 0x2000000 0x0 0xa0000000 + 0x0 0x10000000 + + 0x1000000 0x0 0x0 + 0x1000000 0x0 0x0 + 0x0 0x800000>; + }; + }; + + rio: rapidio@e00c00000 { + reg = <0x0 0xe00c0000 0x0 0x20000>; + port1 { + ranges = <0x0 0x0 0x0 0xc0000000 0x0 0x20000000>; + }; + }; + + leds { + compatible = "gpio-leds"; + + green { + gpios = <&bcsr5 1 0>; + }; + + amber { + gpios = <&bcsr5 2 0>; + }; + + red { + gpios = <&bcsr5 3 0>; + }; + }; +}; + +/include/ "fsl/mpc8568si-post.dtsi" diff --git a/arch/powerpc/boot/dts/mpc8569mds.dts b/arch/powerpc/boot/dts/mpc8569mds.dts new file mode 100644 index 000000000..d0dcdafa5 --- /dev/null +++ b/arch/powerpc/boot/dts/mpc8569mds.dts @@ -0,0 +1,447 @@ +/* + * MPC8569E MDS Device Tree Source + * + * Copyright (C) 2009 Freescale Semiconductor Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +/include/ "fsl/mpc8569si-pre.dtsi" + +/ { + model = "MPC8569EMDS"; + compatible = "fsl,MPC8569EMDS"; + #address-cells = <2>; + #size-cells = <2>; + interrupt-parent = <&mpic>; + + aliases { + ethernet2 = &enet2; + ethernet3 = &enet3; + ethernet5 = &enet5; + ethernet7 = &enet7; + rapidio0 = &rio; + }; + + memory { + device_type = "memory"; + }; + + lbc: localbus@e0005000 { + reg = <0x0 0xe0005000 0x0 0x1000>; + + ranges = <0x0 0x0 0x0 0xfe000000 0x02000000 + 0x1 0x0 0x0 0xf8000000 0x00008000 + 0x2 0x0 0x0 0xf0000000 0x04000000 + 0x3 0x0 0x0 0xfc000000 0x00008000 + 0x4 0x0 0x0 0xf8008000 0x00008000 + 0x5 0x0 0x0 0xf8010000 0x00008000>; + + nor@0,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "cfi-flash"; + reg = <0x0 0x0 0x02000000>; + bank-width = <1>; + device-width = <1>; + partition@0 { + label = "ramdisk"; + reg = <0x00000000 0x01c00000>; + }; + partition@1c00000 { + label = "kernel"; + reg = <0x01c00000 0x002e0000>; + }; + partiton@1ee0000 { + label = "dtb"; + reg = <0x01ee0000 0x00020000>; + }; + partition@1f00000 { + label = "firmware"; + reg = <0x01f00000 0x00080000>; + read-only; + }; + partition@1f80000 { + label = "u-boot"; + reg = <0x01f80000 0x00080000>; + read-only; + }; + }; + + bcsr@1,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,mpc8569mds-bcsr"; + reg = <1 0 0x8000>; + ranges = <0 1 0 0x8000>; + + bcsr17: gpio-controller@11 { + #gpio-cells = <2>; + compatible = "fsl,mpc8569mds-bcsr-gpio"; + reg = <0x11 0x1>; + gpio-controller; + }; + }; + + nand@3,0 { + compatible = "fsl,mpc8569-fcm-nand", + "fsl,elbc-fcm-nand"; + reg = <3 0 0x8000>; + }; + + pib@4,0 { + compatible = "fsl,mpc8569mds-pib"; + reg = <4 0 0x8000>; + }; + + pib@5,0 { + compatible = "fsl,mpc8569mds-pib"; + reg = <5 0 0x8000>; + }; + }; + + soc: soc@e0000000 { + ranges = <0x0 0x0 0xe0000000 0x100000>; + + i2c-sleep-nexus { + i2c@3000 { + rtc@68 { + compatible = "dallas,ds1374"; + reg = <0x68>; + interrupts = <3 1 0 0>; + }; + }; + }; + + sdhc@2e000 { + status = "disabled"; + sdhci,1-bit-only; + bus-width = <1>; + }; + + par_io@e0100 { + num-ports = <7>; + + qe_pio_e: gpio-controller@80 { + #gpio-cells = <2>; + compatible = "fsl,mpc8569-qe-pario-bank", + "fsl,mpc8323-qe-pario-bank"; + reg = <0x80 0x18>; + gpio-controller; + }; + + qe_pio_f: gpio-controller@a0 { + #gpio-cells = <2>; + compatible = "fsl,mpc8569-qe-pario-bank", + "fsl,mpc8323-qe-pario-bank"; + reg = <0xa0 0x18>; + gpio-controller; + }; + + pio1: ucc_pin@01 { + pio-map = < + /* port pin dir open_drain assignment has_irq */ + 0x2 0x1f 0x1 0x0 0x1 0x0 /* QE_MUX_MDC */ + 0x2 0x1e 0x3 0x0 0x2 0x0 /* QE_MUX_MDIO */ + 0x2 0x0b 0x2 0x0 0x1 0x0 /* CLK12*/ + 0x0 0x0 0x1 0x0 0x3 0x0 /* ENET1_TXD0_SER1_TXD0 */ + 0x0 0x1 0x1 0x0 0x3 0x0 /* ENET1_TXD1_SER1_TXD1 */ + 0x0 0x2 0x1 0x0 0x1 0x0 /* ENET1_TXD2_SER1_TXD2 */ + 0x0 0x3 0x1 0x0 0x2 0x0 /* ENET1_TXD3_SER1_TXD3 */ + 0x0 0x6 0x2 0x0 0x3 0x0 /* ENET1_RXD0_SER1_RXD0 */ + 0x0 0x7 0x2 0x0 0x1 0x0 /* ENET1_RXD1_SER1_RXD1 */ + 0x0 0x8 0x2 0x0 0x2 0x0 /* ENET1_RXD2_SER1_RXD2 */ + 0x0 0x9 0x2 0x0 0x2 0x0 /* ENET1_RXD3_SER1_RXD3 */ + 0x0 0x4 0x1 0x0 0x2 0x0 /* ENET1_TX_EN_SER1_RTS_B */ + 0x0 0xc 0x2 0x0 0x3 0x0 /* ENET1_RX_DV_SER1_CTS_B */ + 0x2 0x8 0x2 0x0 0x1 0x0 /* ENET1_GRXCLK */ + 0x2 0x14 0x1 0x0 0x2 0x0>; /* ENET1_GTXCLK */ + }; + + pio2: ucc_pin@02 { + pio-map = < + /* port pin dir open_drain assignment has_irq */ + 0x2 0x1f 0x1 0x0 0x1 0x0 /* QE_MUX_MDC */ + 0x2 0x1e 0x3 0x0 0x2 0x0 /* QE_MUX_MDIO */ + 0x2 0x10 0x2 0x0 0x3 0x0 /* CLK17 */ + 0x0 0xe 0x1 0x0 0x2 0x0 /* ENET2_TXD0_SER2_TXD0 */ + 0x0 0xf 0x1 0x0 0x2 0x0 /* ENET2_TXD1_SER2_TXD1 */ + 0x0 0x10 0x1 0x0 0x1 0x0 /* ENET2_TXD2_SER2_TXD2 */ + 0x0 0x11 0x1 0x0 0x1 0x0 /* ENET2_TXD3_SER2_TXD3 */ + 0x0 0x14 0x2 0x0 0x2 0x0 /* ENET2_RXD0_SER2_RXD0 */ + 0x0 0x15 0x2 0x0 0x1 0x0 /* ENET2_RXD1_SER2_RXD1 */ + 0x0 0x16 0x2 0x0 0x1 0x0 /* ENET2_RXD2_SER2_RXD2 */ + 0x0 0x17 0x2 0x0 0x1 0x0 /* ENET2_RXD3_SER2_RXD3 */ + 0x0 0x12 0x1 0x0 0x2 0x0 /* ENET2_TX_EN_SER2_RTS_B */ + 0x0 0x1a 0x2 0x0 0x3 0x0 /* ENET2_RX_DV_SER2_CTS_B */ + 0x2 0x3 0x2 0x0 0x1 0x0 /* ENET2_GRXCLK */ + 0x2 0x2 0x1 0x0 0x2 0x0>; /* ENET2_GTXCLK */ + }; + + pio3: ucc_pin@03 { + pio-map = < + /* port pin dir open_drain assignment has_irq */ + 0x2 0x1f 0x1 0x0 0x1 0x0 /* QE_MUX_MDC */ + 0x2 0x1e 0x3 0x0 0x2 0x0 /* QE_MUX_MDIO */ + 0x2 0x0b 0x2 0x0 0x1 0x0 /* CLK12*/ + 0x0 0x1d 0x1 0x0 0x2 0x0 /* ENET3_TXD0_SER3_TXD0 */ + 0x0 0x1e 0x1 0x0 0x3 0x0 /* ENET3_TXD1_SER3_TXD1 */ + 0x0 0x1f 0x1 0x0 0x2 0x0 /* ENET3_TXD2_SER3_TXD2 */ + 0x1 0x0 0x1 0x0 0x3 0x0 /* ENET3_TXD3_SER3_TXD3 */ + 0x1 0x3 0x2 0x0 0x3 0x0 /* ENET3_RXD0_SER3_RXD0 */ + 0x1 0x4 0x2 0x0 0x1 0x0 /* ENET3_RXD1_SER3_RXD1 */ + 0x1 0x5 0x2 0x0 0x2 0x0 /* ENET3_RXD2_SER3_RXD2 */ + 0x1 0x6 0x2 0x0 0x3 0x0 /* ENET3_RXD3_SER3_RXD3 */ + 0x1 0x1 0x1 0x0 0x1 0x0 /* ENET3_TX_EN_SER3_RTS_B */ + 0x1 0x9 0x2 0x0 0x3 0x0 /* ENET3_RX_DV_SER3_CTS_B */ + 0x2 0x9 0x2 0x0 0x2 0x0 /* ENET3_GRXCLK */ + 0x2 0x19 0x1 0x0 0x2 0x0>; /* ENET3_GTXCLK */ + }; + + pio4: ucc_pin@04 { + pio-map = < + /* port pin dir open_drain assignment has_irq */ + 0x2 0x1f 0x1 0x0 0x1 0x0 /* QE_MUX_MDC */ + 0x2 0x1e 0x3 0x0 0x2 0x0 /* QE_MUX_MDIO */ + 0x2 0x10 0x2 0x0 0x3 0x0 /* CLK17 */ + 0x1 0xc 0x1 0x0 0x2 0x0 /* ENET4_TXD0_SER4_TXD0 */ + 0x1 0xd 0x1 0x0 0x2 0x0 /* ENET4_TXD1_SER4_TXD1 */ + 0x1 0xe 0x1 0x0 0x1 0x0 /* ENET4_TXD2_SER4_TXD2 */ + 0x1 0xf 0x1 0x0 0x2 0x0 /* ENET4_TXD3_SER4_TXD3 */ + 0x1 0x12 0x2 0x0 0x2 0x0 /* ENET4_RXD0_SER4_RXD0 */ + 0x1 0x13 0x2 0x0 0x1 0x0 /* ENET4_RXD1_SER4_RXD1 */ + 0x1 0x14 0x2 0x0 0x1 0x0 /* ENET4_RXD2_SER4_RXD2 */ + 0x1 0x15 0x2 0x0 0x2 0x0 /* ENET4_RXD3_SER4_RXD3 */ + 0x1 0x10 0x1 0x0 0x2 0x0 /* ENET4_TX_EN_SER4_RTS_B */ + 0x1 0x18 0x2 0x0 0x3 0x0 /* ENET4_RX_DV_SER4_CTS_B */ + 0x2 0x11 0x2 0x0 0x2 0x0 /* ENET4_GRXCLK */ + 0x2 0x18 0x1 0x0 0x2 0x0>; /* ENET4_GTXCLK */ + }; + }; + }; + + qe: qe@e0080000 { + ranges = <0x0 0x0 0xe0080000 0x40000>; + reg = <0x0 0xe0080000 0x0 0x480>; + + spi@4c0 { + gpios = <&qe_pio_e 30 0>; + mode = "cpu-qe"; + + serial-flash@0 { + compatible = "stm,m25p40"; + reg = <0>; + spi-max-frequency = <25000000>; + }; + }; + + spi@500 { + mode = "cpu"; + }; + + usb@6c0 { + fsl,fullspeed-clock = "clk5"; + fsl,lowspeed-clock = "brg10"; + gpios = <&qe_pio_f 3 0 /* USBOE */ + &qe_pio_f 4 0 /* USBTP */ + &qe_pio_f 5 0 /* USBTN */ + &qe_pio_f 6 0 /* USBRP */ + &qe_pio_f 8 0 /* USBRN */ + &bcsr17 1 0 /* SPEED */ + &bcsr17 2 0>; /* POWER */ + }; + + enet0: ucc@2000 { + device_type = "network"; + compatible = "ucc_geth"; + local-mac-address = [ 00 00 00 00 00 00 ]; + rx-clock-name = "none"; + tx-clock-name = "clk12"; + pio-handle = <&pio1>; + tbi-handle = <&tbi1>; + phy-handle = <&qe_phy0>; + phy-connection-type = "rgmii-id"; + }; + + mdio@2120 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x2120 0x18>; + compatible = "fsl,ucc-mdio"; + + qe_phy0: ethernet-phy@07 { + interrupt-parent = <&mpic>; + interrupts = <1 1 0 0>; + reg = <0x7>; + }; + qe_phy1: ethernet-phy@01 { + interrupt-parent = <&mpic>; + interrupts = <2 1 0 0>; + reg = <0x1>; + }; + qe_phy2: ethernet-phy@02 { + interrupt-parent = <&mpic>; + interrupts = <3 1 0 0>; + reg = <0x2>; + }; + qe_phy3: ethernet-phy@03 { + interrupt-parent = <&mpic>; + interrupts = <4 1 0 0>; + reg = <0x3>; + }; + qe_phy5: ethernet-phy@04 { + reg = <0x04>; + }; + qe_phy7: ethernet-phy@06 { + reg = <0x6>; + }; + tbi1: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + mdio@3520 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x3520 0x18>; + compatible = "fsl,ucc-mdio"; + + tbi6: tbi-phy@15 { + reg = <0x15>; + device_type = "tbi-phy"; + }; + }; + mdio@3720 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x3720 0x38>; + compatible = "fsl,ucc-mdio"; + tbi8: tbi-phy@17 { + reg = <0x17>; + device_type = "tbi-phy"; + }; + }; + + enet2: ucc@2200 { + device_type = "network"; + compatible = "ucc_geth"; + local-mac-address = [ 00 00 00 00 00 00 ]; + rx-clock-name = "none"; + tx-clock-name = "clk12"; + pio-handle = <&pio3>; + tbi-handle = <&tbi3>; + phy-handle = <&qe_phy2>; + phy-connection-type = "rgmii-id"; + }; + + mdio@2320 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x2320 0x18>; + compatible = "fsl,ucc-mdio"; + tbi3: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + + enet1: ucc@3000 { + device_type = "network"; + compatible = "ucc_geth"; + local-mac-address = [ 00 00 00 00 00 00 ]; + rx-clock-name = "none"; + tx-clock-name = "clk17"; + pio-handle = <&pio2>; + tbi-handle = <&tbi2>; + phy-handle = <&qe_phy1>; + phy-connection-type = "rgmii-id"; + }; + + mdio@3120 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x3120 0x18>; + compatible = "fsl,ucc-mdio"; + tbi2: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + + enet3: ucc@3200 { + device_type = "network"; + compatible = "ucc_geth"; + local-mac-address = [ 00 00 00 00 00 00 ]; + rx-clock-name = "none"; + tx-clock-name = "clk17"; + pio-handle = <&pio4>; + tbi-handle = <&tbi4>; + phy-handle = <&qe_phy3>; + phy-connection-type = "rgmii-id"; + }; + + mdio@3320 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x3320 0x18>; + compatible = "fsl,ucc-mdio"; + tbi4: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + + enet5: ucc@3400 { + device_type = "network"; + compatible = "ucc_geth"; + local-mac-address = [ 00 00 00 00 00 00 ]; + rx-clock-name = "none"; + tx-clock-name = "none"; + tbi-handle = <&tbi6>; + phy-handle = <&qe_phy5>; + phy-connection-type = "sgmii"; + }; + + enet7: ucc@3600 { + device_type = "network"; + compatible = "ucc_geth"; + local-mac-address = [ 00 00 00 00 00 00 ]; + rx-clock-name = "none"; + tx-clock-name = "none"; + tbi-handle = <&tbi8>; + phy-handle = <&qe_phy7>; + phy-connection-type = "sgmii"; + }; + }; + + /* PCI Express */ + pci1: pcie@e000a000 { + reg = <0x0 0xe000a000 0x0 0x1000>; + ranges = <0x2000000 0x0 0xa0000000 0 0xa0000000 0x0 0x10000000 + 0x1000000 0x0 0x00000000 0 0xe2800000 0x0 0x00800000>; + pcie@0 { + ranges = <0x2000000 0x0 0xa0000000 + 0x2000000 0x0 0xa0000000 + 0x0 0x10000000 + + 0x1000000 0x0 0x0 + 0x1000000 0x0 0x0 + 0x0 0x800000>; + }; + }; + + rio: rapidio@e00c00000 { + reg = <0x0 0xe00c0000 0x0 0x20000>; + port1 { + ranges = <0x0 0x0 0x0 0xc0000000 0x0 0x20000000>; + }; + port2 { + status = "disabled"; + }; + }; +}; + +/include/ "fsl/mpc8569si-post.dtsi" diff --git a/arch/powerpc/boot/dts/mpc8572ds.dts b/arch/powerpc/boot/dts/mpc8572ds.dts new file mode 100644 index 000000000..0c9f2955d --- /dev/null +++ b/arch/powerpc/boot/dts/mpc8572ds.dts @@ -0,0 +1,90 @@ +/* + * MPC8572 DS Device Tree Source + * + * Copyright 2007-2009 Freescale Semiconductor Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +/include/ "fsl/mpc8572si-pre.dtsi" + +/ { + model = "fsl,MPC8572DS"; + compatible = "fsl,MPC8572DS"; + + memory { + device_type = "memory"; + }; + + board_lbc: lbc: localbus@ffe05000 { + reg = <0 0xffe05000 0 0x1000>; + + ranges = <0x0 0x0 0x0 0xe8000000 0x08000000 + 0x1 0x0 0x0 0xe0000000 0x08000000 + 0x2 0x0 0x0 0xffa00000 0x00040000 + 0x3 0x0 0x0 0xffdf0000 0x00008000 + 0x4 0x0 0x0 0xffa40000 0x00040000 + 0x5 0x0 0x0 0xffa80000 0x00040000 + 0x6 0x0 0x0 0xffac0000 0x00040000>; + }; + + board_soc: soc: soc8572@ffe00000 { + ranges = <0x0 0 0xffe00000 0x100000>; + }; + + board_pci0: pci0: pcie@ffe08000 { + reg = <0 0xffe08000 0 0x1000>; + ranges = <0x2000000 0x0 0x80000000 0 0x80000000 0x0 0x20000000 + 0x1000000 0x0 0x00000000 0 0xffc00000 0x0 0x00010000>; + pcie@0 { + ranges = <0x2000000 0x0 0x80000000 + 0x2000000 0x0 0x80000000 + 0x0 0x20000000 + + 0x1000000 0x0 0x0 + 0x1000000 0x0 0x0 + 0x0 0x10000>; + }; + }; + + pci1: pcie@ffe09000 { + reg = <0 0xffe09000 0 0x1000>; + ranges = <0x2000000 0x0 0xa0000000 0 0xa0000000 0x0 0x20000000 + 0x1000000 0x0 0x00000000 0 0xffc10000 0x0 0x00010000>; + pcie@0 { + ranges = <0x2000000 0x0 0xa0000000 + 0x2000000 0x0 0xa0000000 + 0x0 0x20000000 + + 0x1000000 0x0 0x0 + 0x1000000 0x0 0x0 + 0x0 0x10000>; + }; + }; + + pci2: pcie@ffe0a000 { + reg = <0 0xffe0a000 0 0x1000>; + ranges = <0x2000000 0x0 0xc0000000 0 0xc0000000 0x0 0x20000000 + 0x1000000 0x0 0x00000000 0 0xffc20000 0x0 0x00010000>; + pcie@0 { + ranges = <0x2000000 0x0 0xc0000000 + 0x2000000 0x0 0xc0000000 + 0x0 0x20000000 + + 0x1000000 0x0 0x0 + 0x1000000 0x0 0x0 + 0x0 0x10000>; + }; + }; +}; + +/* + * mpc8572ds.dtsi must be last to ensure board_pci0 overrides pci0 settings + * for interrupt-map & interrupt-map-mask + */ + +/include/ "fsl/mpc8572si-post.dtsi" +/include/ "mpc8572ds.dtsi" diff --git a/arch/powerpc/boot/dts/mpc8572ds.dtsi b/arch/powerpc/boot/dts/mpc8572ds.dtsi new file mode 100644 index 000000000..357490bb8 --- /dev/null +++ b/arch/powerpc/boot/dts/mpc8572ds.dtsi @@ -0,0 +1,428 @@ +/* + * MPC8572DS Device Tree Source stub (no addresses or top-level ranges) + * + * Copyright 2011 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +&board_lbc { + nor@0,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "cfi-flash"; + reg = <0x0 0x0 0x8000000>; + bank-width = <2>; + device-width = <1>; + + partition@0 { + reg = <0x0 0x03000000>; + label = "ramdisk-nor"; + }; + + partition@3000000 { + reg = <0x03000000 0x00e00000>; + label = "diagnostic-nor"; + read-only; + }; + + partition@3e00000 { + reg = <0x03e00000 0x00200000>; + label = "dink-nor"; + read-only; + }; + + partition@4000000 { + reg = <0x04000000 0x00400000>; + label = "kernel-nor"; + }; + + partition@4400000 { + reg = <0x04400000 0x03b00000>; + label = "fs-nor"; + }; + + partition@7f00000 { + reg = <0x07f00000 0x00060000>; + label = "dtb-nor"; + }; + + partition@7f60000 { + reg = <0x07f60000 0x00020000>; + label = "env-nor"; + read-only; + }; + + partition@7f80000 { + reg = <0x07f80000 0x00080000>; + label = "u-boot-nor"; + read-only; + }; + }; + + nand@2,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,mpc8572-fcm-nand", + "fsl,elbc-fcm-nand"; + reg = <0x2 0x0 0x40000>; + + partition@0 { + reg = <0x0 0x02000000>; + label = "u-boot-nand"; + read-only; + }; + + partition@2000000 { + reg = <0x02000000 0x10000000>; + label = "fs-nand"; + }; + + partition@12000000 { + reg = <0x12000000 0x08000000>; + label = "ramdisk-nand"; + }; + + partition@1a000000 { + reg = <0x1a000000 0x04000000>; + label = "kernel-nand"; + }; + + partition@1e000000 { + reg = <0x1e000000 0x01000000>; + label = "dtb-nand"; + }; + + partition@1f000000 { + reg = <0x1f000000 0x21000000>; + label = "empty-nand"; + }; + }; + + nand@4,0 { + compatible = "fsl,mpc8572-fcm-nand", + "fsl,elbc-fcm-nand"; + reg = <0x4 0x0 0x40000>; + }; + + nand@5,0 { + compatible = "fsl,mpc8572-fcm-nand", + "fsl,elbc-fcm-nand"; + reg = <0x5 0x0 0x40000>; + }; + + nand@6,0 { + compatible = "fsl,mpc8572-fcm-nand", + "fsl,elbc-fcm-nand"; + reg = <0x6 0x0 0x40000>; + }; +}; + +&board_soc { + enet0: ethernet@24000 { + tbi-handle = <&tbi0>; + phy-handle = <&phy0>; + phy-connection-type = "rgmii-id"; + }; + + mdio@24520 { + phy0: ethernet-phy@0 { + interrupts = <10 1 0 0>; + reg = <0x0>; + }; + phy1: ethernet-phy@1 { + interrupts = <10 1 0 0>; + reg = <0x1>; + }; + phy2: ethernet-phy@2 { + interrupts = <10 1 0 0>; + reg = <0x2>; + }; + phy3: ethernet-phy@3 { + interrupts = <10 1 0 0>; + reg = <0x3>; + }; + + sgmii_phy0: sgmii-phy@0 { + interrupts = <6 1 0 0>; + reg = <0x1c>; + }; + sgmii_phy1: sgmii-phy@1 { + interrupts = <6 1 0 0>; + reg = <0x1d>; + }; + sgmii_phy2: sgmii-phy@2 { + interrupts = <7 1 0 0>; + reg = <0x1e>; + }; + sgmii_phy3: sgmii-phy@3 { + interrupts = <7 1 0 0>; + reg = <0x1f>; + }; + + tbi0: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + + ptp_clock@24e00 { + fsl,tclk-period = <5>; + fsl,tmr-prsc = <200>; + fsl,tmr-add = <0xAAAAAAAB>; + fsl,tmr-fiper1 = <0x3B9AC9FB>; + fsl,tmr-fiper2 = <0x3B9AC9FB>; + fsl,max-adj = <499999999>; + }; + + enet1: ethernet@25000 { + tbi-handle = <&tbi1>; + phy-handle = <&phy1>; + phy-connection-type = "rgmii-id"; + + }; + + mdio@25520 { + tbi1: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + + enet2: ethernet@26000 { + tbi-handle = <&tbi2>; + phy-handle = <&phy2>; + phy-connection-type = "rgmii-id"; + + }; + mdio@26520 { + tbi2: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + + enet3: ethernet@27000 { + tbi-handle = <&tbi3>; + phy-handle = <&phy3>; + phy-connection-type = "rgmii-id"; + }; + + mdio@27520 { + tbi3: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; +}; + +&board_pci0 { + pcie@0 { + interrupt-map-mask = <0xff00 0x0 0x0 0x7>; + interrupt-map = < + /* IDSEL 0x11 func 0 - PCI slot 1 */ + 0x8800 0x0 0x0 0x1 &mpic 0x2 0x1 0 0 + 0x8800 0x0 0x0 0x2 &mpic 0x3 0x1 0 0 + 0x8800 0x0 0x0 0x3 &mpic 0x4 0x1 0 0 + 0x8800 0x0 0x0 0x4 &mpic 0x1 0x1 0 0 + + /* IDSEL 0x11 func 1 - PCI slot 1 */ + 0x8900 0x0 0x0 0x1 &mpic 0x2 0x1 0 0 + 0x8900 0x0 0x0 0x2 &mpic 0x3 0x1 0 0 + 0x8900 0x0 0x0 0x3 &mpic 0x4 0x1 0 0 + 0x8900 0x0 0x0 0x4 &mpic 0x1 0x1 0 0 + + /* IDSEL 0x11 func 2 - PCI slot 1 */ + 0x8a00 0x0 0x0 0x1 &mpic 0x2 0x1 0 0 + 0x8a00 0x0 0x0 0x2 &mpic 0x3 0x1 0 0 + 0x8a00 0x0 0x0 0x3 &mpic 0x4 0x1 0 0 + 0x8a00 0x0 0x0 0x4 &mpic 0x1 0x1 0 0 + + /* IDSEL 0x11 func 3 - PCI slot 1 */ + 0x8b00 0x0 0x0 0x1 &mpic 0x2 0x1 0 0 + 0x8b00 0x0 0x0 0x2 &mpic 0x3 0x1 0 0 + 0x8b00 0x0 0x0 0x3 &mpic 0x4 0x1 0 0 + 0x8b00 0x0 0x0 0x4 &mpic 0x1 0x1 0 0 + + /* IDSEL 0x11 func 4 - PCI slot 1 */ + 0x8c00 0x0 0x0 0x1 &mpic 0x2 0x1 0 0 + 0x8c00 0x0 0x0 0x2 &mpic 0x3 0x1 0 0 + 0x8c00 0x0 0x0 0x3 &mpic 0x4 0x1 0 0 + 0x8c00 0x0 0x0 0x4 &mpic 0x1 0x1 0 0 + + /* IDSEL 0x11 func 5 - PCI slot 1 */ + 0x8d00 0x0 0x0 0x1 &mpic 0x2 0x1 0 0 + 0x8d00 0x0 0x0 0x2 &mpic 0x3 0x1 0 0 + 0x8d00 0x0 0x0 0x3 &mpic 0x4 0x1 0 0 + 0x8d00 0x0 0x0 0x4 &mpic 0x1 0x1 0 0 + + /* IDSEL 0x11 func 6 - PCI slot 1 */ + 0x8e00 0x0 0x0 0x1 &mpic 0x2 0x1 0 0 + 0x8e00 0x0 0x0 0x2 &mpic 0x3 0x1 0 0 + 0x8e00 0x0 0x0 0x3 &mpic 0x4 0x1 0 0 + 0x8e00 0x0 0x0 0x4 &mpic 0x1 0x1 0 0 + + /* IDSEL 0x11 func 7 - PCI slot 1 */ + 0x8f00 0x0 0x0 0x1 &mpic 0x2 0x1 0 0 + 0x8f00 0x0 0x0 0x2 &mpic 0x3 0x1 0 0 + 0x8f00 0x0 0x0 0x3 &mpic 0x4 0x1 0 0 + 0x8f00 0x0 0x0 0x4 &mpic 0x1 0x1 0 0 + + /* IDSEL 0x12 func 0 - PCI slot 2 */ + 0x9000 0x0 0x0 0x1 &mpic 0x3 0x1 0 0 + 0x9000 0x0 0x0 0x2 &mpic 0x4 0x1 0 0 + 0x9000 0x0 0x0 0x3 &mpic 0x1 0x1 0 0 + 0x9000 0x0 0x0 0x4 &mpic 0x2 0x1 0 0 + + /* IDSEL 0x12 func 1 - PCI slot 2 */ + 0x9100 0x0 0x0 0x1 &mpic 0x3 0x1 0 0 + 0x9100 0x0 0x0 0x2 &mpic 0x4 0x1 0 0 + 0x9100 0x0 0x0 0x3 &mpic 0x1 0x1 0 0 + 0x9100 0x0 0x0 0x4 &mpic 0x2 0x1 0 0 + + /* IDSEL 0x12 func 2 - PCI slot 2 */ + 0x9200 0x0 0x0 0x1 &mpic 0x3 0x1 0 0 + 0x9200 0x0 0x0 0x2 &mpic 0x4 0x1 0 0 + 0x9200 0x0 0x0 0x3 &mpic 0x1 0x1 0 0 + 0x9200 0x0 0x0 0x4 &mpic 0x2 0x1 0 0 + + /* IDSEL 0x12 func 3 - PCI slot 2 */ + 0x9300 0x0 0x0 0x1 &mpic 0x3 0x1 0 0 + 0x9300 0x0 0x0 0x2 &mpic 0x4 0x1 0 0 + 0x9300 0x0 0x0 0x3 &mpic 0x1 0x1 0 0 + 0x9300 0x0 0x0 0x4 &mpic 0x2 0x1 0 0 + + /* IDSEL 0x12 func 4 - PCI slot 2 */ + 0x9400 0x0 0x0 0x1 &mpic 0x3 0x1 0 0 + 0x9400 0x0 0x0 0x2 &mpic 0x4 0x1 0 0 + 0x9400 0x0 0x0 0x3 &mpic 0x1 0x1 0 0 + 0x9400 0x0 0x0 0x4 &mpic 0x2 0x1 0 0 + + /* IDSEL 0x12 func 5 - PCI slot 2 */ + 0x9500 0x0 0x0 0x1 &mpic 0x3 0x1 0 0 + 0x9500 0x0 0x0 0x2 &mpic 0x4 0x1 0 0 + 0x9500 0x0 0x0 0x3 &mpic 0x1 0x1 0 0 + 0x9500 0x0 0x0 0x4 &mpic 0x2 0x1 0 0 + + /* IDSEL 0x12 func 6 - PCI slot 2 */ + 0x9600 0x0 0x0 0x1 &mpic 0x3 0x1 0 0 + 0x9600 0x0 0x0 0x2 &mpic 0x4 0x1 0 0 + 0x9600 0x0 0x0 0x3 &mpic 0x1 0x1 0 0 + 0x9600 0x0 0x0 0x4 &mpic 0x2 0x1 0 0 + + /* IDSEL 0x12 func 7 - PCI slot 2 */ + 0x9700 0x0 0x0 0x1 &mpic 0x3 0x1 0 0 + 0x9700 0x0 0x0 0x2 &mpic 0x4 0x1 0 0 + 0x9700 0x0 0x0 0x3 &mpic 0x1 0x1 0 0 + 0x9700 0x0 0x0 0x4 &mpic 0x2 0x1 0 0 + + // IDSEL 0x1c USB + 0xe000 0x0 0x0 0x1 &i8259 0xc 0x2 + 0xe100 0x0 0x0 0x2 &i8259 0x9 0x2 + 0xe200 0x0 0x0 0x3 &i8259 0xa 0x2 + 0xe300 0x0 0x0 0x4 &i8259 0xb 0x2 + + // IDSEL 0x1d Audio + 0xe800 0x0 0x0 0x1 &i8259 0x6 0x2 + + // IDSEL 0x1e Legacy + 0xf000 0x0 0x0 0x1 &i8259 0x7 0x2 + 0xf100 0x0 0x0 0x1 &i8259 0x7 0x2 + + // IDSEL 0x1f IDE/SATA + 0xf800 0x0 0x0 0x1 &i8259 0xe 0x2 + 0xf900 0x0 0x0 0x1 &i8259 0x5 0x2 + >; + + + uli1575@0 { + reg = <0x0 0x0 0x0 0x0 0x0>; + #size-cells = <2>; + #address-cells = <3>; + ranges = <0x2000000 0x0 0x80000000 + 0x2000000 0x0 0x80000000 + 0x0 0x20000000 + + 0x1000000 0x0 0x0 + 0x1000000 0x0 0x0 + 0x0 0x10000>; + isa@1e { + device_type = "isa"; + #interrupt-cells = <2>; + #size-cells = <1>; + #address-cells = <2>; + reg = <0xf000 0x0 0x0 0x0 0x0>; + ranges = <0x1 0x0 0x1000000 0x0 0x0 + 0x1000>; + interrupt-parent = <&i8259>; + + i8259: interrupt-controller@20 { + reg = <0x1 0x20 0x2 + 0x1 0xa0 0x2 + 0x1 0x4d0 0x2>; + interrupt-controller; + device_type = "interrupt-controller"; + #address-cells = <0>; + #interrupt-cells = <2>; + compatible = "chrp,iic"; + interrupts = <9 2 0 0>; + interrupt-parent = <&mpic>; + }; + + i8042@60 { + #size-cells = <0>; + #address-cells = <1>; + reg = <0x1 0x60 0x1 0x1 0x64 0x1>; + interrupts = <1 3 12 3>; + interrupt-parent = + <&i8259>; + + keyboard@0 { + reg = <0x0>; + compatible = "pnpPNP,303"; + }; + + mouse@1 { + reg = <0x1>; + compatible = "pnpPNP,f03"; + }; + }; + + rtc@70 { + compatible = "pnpPNP,b00"; + reg = <0x1 0x70 0x2>; + }; + + gpio@400 { + reg = <0x1 0x400 0x80>; + }; + }; + }; + }; +}; diff --git a/arch/powerpc/boot/dts/mpc8572ds_36b.dts b/arch/powerpc/boot/dts/mpc8572ds_36b.dts new file mode 100644 index 000000000..6c3d0b305 --- /dev/null +++ b/arch/powerpc/boot/dts/mpc8572ds_36b.dts @@ -0,0 +1,90 @@ +/* + * MPC8572DS Device Tree Source (36-bit address map) + * + * Copyright 2007-2009 Freescale Semiconductor Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +/include/ "fsl/mpc8572si-pre.dtsi" + +/ { + model = "fsl,MPC8572DS"; + compatible = "fsl,MPC8572DS"; + + memory { + device_type = "memory"; + }; + + board_lbc: lbc: localbus@fffe05000 { + reg = <0xf 0xffe05000 0 0x1000>; + + ranges = <0x0 0x0 0xf 0xe8000000 0x08000000 + 0x1 0x0 0xf 0xe0000000 0x08000000 + 0x2 0x0 0xf 0xffa00000 0x00040000 + 0x3 0x0 0xf 0xffdf0000 0x00008000 + 0x4 0x0 0xf 0xffa40000 0x00040000 + 0x5 0x0 0xf 0xffa80000 0x00040000 + 0x6 0x0 0xf 0xffac0000 0x00040000>; + }; + + board_soc: soc: soc8572@fffe00000 { + ranges = <0x0 0xf 0xffe00000 0x100000>; + }; + + board_pci0: pci0: pcie@fffe08000 { + reg = <0xf 0xffe08000 0 0x1000>; + ranges = <0x2000000 0x0 0xe0000000 0xc 0x00000000 0x0 0x20000000 + 0x1000000 0x0 0x00000000 0xf 0xffc00000 0x0 0x00010000>; + pcie@0 { + ranges = <0x2000000 0x0 0xe0000000 + 0x2000000 0x0 0xe0000000 + 0x0 0x20000000 + + 0x1000000 0x0 0x0 + 0x1000000 0x0 0x0 + 0x0 0x10000>; + }; + }; + + pci1: pcie@fffe09000 { + reg = <0xf 0xffe09000 0 0x1000>; + ranges = <0x2000000 0x0 0xe0000000 0xc 0x20000000 0x0 0x20000000 + 0x1000000 0x0 0x00000000 0xf 0xffc10000 0x0 0x00010000>; + pcie@0 { + ranges = <0x2000000 0x0 0xe0000000 + 0x2000000 0x0 0xe0000000 + 0x0 0x20000000 + + 0x1000000 0x0 0x0 + 0x1000000 0x0 0x0 + 0x0 0x10000>; + }; + }; + + pci2: pcie@fffe0a000 { + reg = <0xf 0xffe0a000 0 0x1000>; + ranges = <0x2000000 0x0 0xe0000000 0xc 0x40000000 0x0 0x20000000 + 0x1000000 0x0 0x00000000 0xf 0xffc20000 0x0 0x00010000>; + pcie@0 { + ranges = <0x2000000 0x0 0xe0000000 + 0x2000000 0x0 0xe0000000 + 0x0 0x20000000 + + 0x1000000 0x0 0x0 + 0x1000000 0x0 0x0 + 0x0 0x10000>; + }; + }; +}; + +/* + * mpc8572ds.dtsi must be last to ensure board_pci0 overrides pci0 settings + * for interrupt-map & interrupt-map-mask + */ + +/include/ "fsl/mpc8572si-post.dtsi" +/include/ "mpc8572ds.dtsi" diff --git a/arch/powerpc/boot/dts/mpc8572ds_camp_core0.dts b/arch/powerpc/boot/dts/mpc8572ds_camp_core0.dts new file mode 100644 index 000000000..ef9ef56b3 --- /dev/null +++ b/arch/powerpc/boot/dts/mpc8572ds_camp_core0.dts @@ -0,0 +1,82 @@ +/* + * MPC8572 DS Core0 Device Tree Source in CAMP mode. + * + * In CAMP mode, each core needs to have its own dts. Only mpic and L2 cache + * can be shared, all the other devices must be assigned to one core only. + * This dts file allows core0 to have memory, l2, i2c, dma1, global-util, eth0, + * eth1, crypto, pci0, pci1. + * + * Copyright 2007-2009 Freescale Semiconductor Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +/include/ "mpc8572ds.dts" + +/ { + model = "fsl,MPC8572DS"; + compatible = "fsl,MPC8572DS", "fsl,MPC8572DS-CAMP"; + + cpus { + PowerPC,8572@0 { + }; + PowerPC,8572@1 { + status = "disabled"; + }; + }; + + localbus@ffe05000 { + status = "disabled"; + }; + + soc8572@ffe00000 { + serial@4600 { + status = "disabled"; + }; + dma@c300 { + status = "disabled"; + }; + gpio-controller@f000 { + }; + l2-cache-controller@20000 { + cache-size = <0x80000>; // L2, 512K + }; + ethernet@26000 { + status = "disabled"; + }; + mdio@26520 { + status = "disabled"; + }; + ethernet@27000 { + status = "disabled"; + }; + mdio@27520 { + status = "disabled"; + }; + pic@40000 { + protected-sources = < + 31 32 33 37 38 39 /* enet2 enet3 */ + 76 77 78 79 26 42 /* dma2 pci2 serial*/ + 0xe4 0xe5 0xe6 0xe7 /* msi */ + >; + }; + + msi@41600 { + msi-available-ranges = <0 0x80>; + interrupts = < + 0xe0 0 0 0 + 0xe1 0 0 0 + 0xe2 0 0 0 + 0xe3 0 0 0>; + }; + timer@42100 { + status = "disabled"; + }; + }; + pcie@ffe0a000 { + status = "disabled"; + }; +}; diff --git a/arch/powerpc/boot/dts/mpc8572ds_camp_core1.dts b/arch/powerpc/boot/dts/mpc8572ds_camp_core1.dts new file mode 100644 index 000000000..24564ee10 --- /dev/null +++ b/arch/powerpc/boot/dts/mpc8572ds_camp_core1.dts @@ -0,0 +1,115 @@ +/* + * MPC8572 DS Core1 Device Tree Source in CAMP mode. + * + * In CAMP mode, each core needs to have its own dts. Only mpic and L2 cache + * can be shared, all the other devices must be assigned to one core only. + * This dts allows core1 to have l2, dma2, eth2, eth3, pci2, msi. + * + * Please note to add "-b 1" for core1's dts compiling. + * + * Copyright 2007-2009 Freescale Semiconductor Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +/include/ "mpc8572ds.dts" + +/ { + model = "fsl,MPC8572DS"; + compatible = "fsl,MPC8572DS", "fsl,MPC8572DS-CAMP"; + + cpus { + PowerPC,8572@0 { + status = "disabled"; + }; + PowerPC,8572@1 { + }; + }; + + localbus@ffe05000 { + status = "disabled"; + }; + + soc8572@ffe00000 { + ecm-law@0 { + status = "disabled"; + }; + ecm@1000 { + status = "disabled"; + }; + memory-controller@2000 { + status = "disabled"; + }; + memory-controller@6000 { + status = "disabled"; + }; + i2c@3000 { + status = "disabled"; + }; + i2c@3100 { + status = "disabled"; + }; + serial@4500 { + status = "disabled"; + }; + gpio-controller@f000 { + status = "disabled"; + }; + l2-cache-controller@20000 { + cache-size = <0x80000>; // L2, 512K + }; + dma@21300 { + status = "disabled"; + }; + ethernet@24000 { + status = "disabled"; + }; + ptp_clock@24e00 { + status = "disabled"; + }; + ethernet@25000 { + status = "disabled"; + }; + mdio@25520 { + status = "disabled"; + }; + crypto@30000 { + status = "disabled"; + }; + pic@40000 { + protected-sources = < + 18 16 10 42 45 58 /* MEM L2 mdio serial crypto */ + 29 30 34 35 36 40 /* enet0 enet1 */ + 24 25 20 21 22 23 /* pci0 pci1 dma1 */ + 43 /* i2c */ + 0x1 0x2 0x3 0x4 /* pci slot */ + 0x9 0xa 0xb 0xc /* usb */ + 0x6 0x7 0xe 0x5 /* Audio elgacy SATA */ + 0xe0 0xe1 0xe2 0xe3 /* msi */ + >; + }; + timer@41100 { + status = "disabled"; + }; + msi@41600 { + msi-available-ranges = <0x80 0x80>; + interrupts = < + 0xe4 0 0 0 + 0xe5 0 0 0 + 0xe6 0 0 0 + 0xe7 0 0 0>; + }; + global-utilities@e0000 { + status = "disabled"; + }; + }; + pcie@ffe08000 { + status = "disabled"; + }; + pcie@ffe09000 { + status = "disabled"; + }; +}; diff --git a/arch/powerpc/boot/dts/mpc8610_hpcd.dts b/arch/powerpc/boot/dts/mpc8610_hpcd.dts new file mode 100644 index 000000000..6a109a0ce --- /dev/null +++ b/arch/powerpc/boot/dts/mpc8610_hpcd.dts @@ -0,0 +1,506 @@ +/* + * MPC8610 HPCD Device Tree Source + * + * Copyright 2007-2008 Freescale Semiconductor Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License Version 2 as published + * by the Free Software Foundation. + */ + +/dts-v1/; + +/ { + model = "MPC8610HPCD"; + compatible = "fsl,MPC8610HPCD"; + #address-cells = <1>; + #size-cells = <1>; + + aliases { + serial0 = &serial0; + serial1 = &serial1; + pci0 = &pci0; + pci1 = &pci1; + pci2 = &pci2; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + PowerPC,8610@0 { + device_type = "cpu"; + reg = <0>; + d-cache-line-size = <32>; + i-cache-line-size = <32>; + d-cache-size = <32768>; // L1 + i-cache-size = <32768>; // L1 + sleep = <&pmc 0x00008000 0 // core + &pmc 0x00004000 0>; // timebase + timebase-frequency = <0>; // From uboot + bus-frequency = <0>; // From uboot + clock-frequency = <0>; // From uboot + }; + }; + + memory { + device_type = "memory"; + reg = <0x00000000 0x20000000>; // 512M at 0x0 + }; + + localbus@e0005000 { + #address-cells = <2>; + #size-cells = <1>; + compatible = "fsl,mpc8610-elbc", "fsl,elbc", "simple-bus"; + reg = <0xe0005000 0x1000>; + interrupts = <19 2>; + interrupt-parent = <&mpic>; + ranges = <0 0 0xf8000000 0x08000000 + 1 0 0xf0000000 0x08000000 + 2 0 0xe8400000 0x00008000 + 4 0 0xe8440000 0x00008000 + 5 0 0xe8480000 0x00008000 + 6 0 0xe84c0000 0x00008000 + 3 0 0xe8000000 0x00000020>; + sleep = <&pmc 0x08000000 0>; + + flash@0,0 { + compatible = "cfi-flash"; + reg = <0 0 0x8000000>; + bank-width = <2>; + device-width = <1>; + }; + + flash@1,0 { + compatible = "cfi-flash"; + reg = <1 0 0x8000000>; + bank-width = <2>; + device-width = <1>; + }; + + flash@2,0 { + compatible = "fsl,mpc8610-fcm-nand", + "fsl,elbc-fcm-nand"; + reg = <2 0 0x8000>; + }; + + flash@4,0 { + compatible = "fsl,mpc8610-fcm-nand", + "fsl,elbc-fcm-nand"; + reg = <4 0 0x8000>; + }; + + flash@5,0 { + compatible = "fsl,mpc8610-fcm-nand", + "fsl,elbc-fcm-nand"; + reg = <5 0 0x8000>; + }; + + flash@6,0 { + compatible = "fsl,mpc8610-fcm-nand", + "fsl,elbc-fcm-nand"; + reg = <6 0 0x8000>; + }; + + board-control@3,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,fpga-pixis"; + reg = <3 0 0x20>; + ranges = <0 3 0 0x20>; + interrupt-parent = <&mpic>; + interrupts = <8 8>; + + sdcsr_pio: gpio-controller@a { + #gpio-cells = <2>; + compatible = "fsl,fpga-pixis-gpio-bank"; + reg = <0xa 1>; + gpio-controller; + }; + }; + }; + + soc@e0000000 { + #address-cells = <1>; + #size-cells = <1>; + #interrupt-cells = <2>; + device_type = "soc"; + compatible = "fsl,mpc8610-immr", "simple-bus"; + ranges = <0x0 0xe0000000 0x00100000>; + bus-frequency = <0>; + + mcm-law@0 { + compatible = "fsl,mcm-law"; + reg = <0x0 0x1000>; + fsl,num-laws = <10>; + }; + + mcm@1000 { + compatible = "fsl,mpc8610-mcm", "fsl,mcm"; + reg = <0x1000 0x1000>; + interrupts = <17 2>; + interrupt-parent = <&mpic>; + }; + + i2c@3000 { + #address-cells = <1>; + #size-cells = <0>; + cell-index = <0>; + compatible = "fsl-i2c"; + reg = <0x3000 0x100>; + interrupts = <43 2>; + interrupt-parent = <&mpic>; + dfsrr; + + cs4270:codec@4f { + compatible = "cirrus,cs4270"; + reg = <0x4f>; + /* MCLK source is a stand-alone oscillator */ + clock-frequency = <12288000>; + }; + }; + + i2c@3100 { + #address-cells = <1>; + #size-cells = <0>; + cell-index = <1>; + compatible = "fsl-i2c"; + reg = <0x3100 0x100>; + interrupts = <43 2>; + interrupt-parent = <&mpic>; + sleep = <&pmc 0x00000004 0>; + dfsrr; + }; + + serial0: serial@4500 { + cell-index = <0>; + device_type = "serial"; + compatible = "fsl,ns16550", "ns16550"; + reg = <0x4500 0x100>; + clock-frequency = <0>; + interrupts = <42 2>; + interrupt-parent = <&mpic>; + sleep = <&pmc 0x00000002 0>; + }; + + serial1: serial@4600 { + cell-index = <1>; + device_type = "serial"; + compatible = "fsl,ns16550", "ns16550"; + reg = <0x4600 0x100>; + clock-frequency = <0>; + interrupts = <42 2>; + interrupt-parent = <&mpic>; + sleep = <&pmc 0x00000008 0>; + }; + + spi@7000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,mpc8610-spi", "fsl,spi"; + reg = <0x7000 0x40>; + cell-index = <0>; + interrupts = <59 2>; + interrupt-parent = <&mpic>; + mode = "cpu"; + gpios = <&sdcsr_pio 7 0>; + sleep = <&pmc 0x00000800 0>; + + mmc-slot@0 { + compatible = "fsl,mpc8610hpcd-mmc-slot", + "mmc-spi-slot"; + reg = <0>; + gpios = <&sdcsr_pio 0 1 /* nCD */ + &sdcsr_pio 1 0>; /* WP */ + voltage-ranges = <3300 3300>; + spi-max-frequency = <50000000>; + }; + }; + + display@2c000 { + compatible = "fsl,diu"; + reg = <0x2c000 100>; + interrupts = <72 2>; + interrupt-parent = <&mpic>; + sleep = <&pmc 0x04000000 0>; + }; + + mpic: interrupt-controller@40000 { + interrupt-controller; + #address-cells = <0>; + #interrupt-cells = <2>; + reg = <0x40000 0x40000>; + compatible = "chrp,open-pic"; + device_type = "open-pic"; + }; + + msi@41600 { + compatible = "fsl,mpc8610-msi", "fsl,mpic-msi"; + reg = <0x41600 0x80>; + msi-available-ranges = <0 0x100>; + interrupts = < + 0xe0 0 + 0xe1 0 + 0xe2 0 + 0xe3 0 + 0xe4 0 + 0xe5 0 + 0xe6 0 + 0xe7 0>; + interrupt-parent = <&mpic>; + }; + + global-utilities@e0000 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,mpc8610-guts"; + reg = <0xe0000 0x1000>; + ranges = <0 0xe0000 0x1000>; + fsl,has-rstcr; + + pmc: power@70 { + compatible = "fsl,mpc8610-pmc", + "fsl,mpc8641d-pmc"; + reg = <0x70 0x20>; + }; + }; + + wdt@e4000 { + compatible = "fsl,mpc8610-wdt"; + reg = <0xe4000 0x100>; + }; + + ssi@16000 { + compatible = "fsl,mpc8610-ssi"; + cell-index = <0>; + reg = <0x16000 0x100>; + interrupt-parent = <&mpic>; + interrupts = <62 2>; + fsl,mode = "i2s-slave"; + codec-handle = <&cs4270>; + fsl,playback-dma = <&dma00>; + fsl,capture-dma = <&dma01>; + fsl,fifo-depth = <8>; + sleep = <&pmc 0 0x08000000>; + }; + + ssi@16100 { + compatible = "fsl,mpc8610-ssi"; + status = "disabled"; + cell-index = <1>; + reg = <0x16100 0x100>; + interrupt-parent = <&mpic>; + interrupts = <63 2>; + fsl,fifo-depth = <8>; + sleep = <&pmc 0 0x04000000>; + }; + + dma@21300 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,mpc8610-dma", "fsl,eloplus-dma"; + cell-index = <0>; + reg = <0x21300 0x4>; /* DMA general status register */ + ranges = <0x0 0x21100 0x200>; + sleep = <&pmc 0x00000400 0>; + + dma00: dma-channel@0 { + compatible = "fsl,mpc8610-dma-channel", + "fsl,ssi-dma-channel"; + cell-index = <0>; + reg = <0x0 0x80>; + interrupt-parent = <&mpic>; + interrupts = <20 2>; + }; + dma01: dma-channel@1 { + compatible = "fsl,mpc8610-dma-channel", + "fsl,ssi-dma-channel"; + cell-index = <1>; + reg = <0x80 0x80>; + interrupt-parent = <&mpic>; + interrupts = <21 2>; + }; + dma-channel@2 { + compatible = "fsl,mpc8610-dma-channel", + "fsl,eloplus-dma-channel"; + cell-index = <2>; + reg = <0x100 0x80>; + interrupt-parent = <&mpic>; + interrupts = <22 2>; + }; + dma-channel@3 { + compatible = "fsl,mpc8610-dma-channel", + "fsl,eloplus-dma-channel"; + cell-index = <3>; + reg = <0x180 0x80>; + interrupt-parent = <&mpic>; + interrupts = <23 2>; + }; + }; + + dma@c300 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,mpc8610-dma", "fsl,eloplus-dma"; + cell-index = <1>; + reg = <0xc300 0x4>; /* DMA general status register */ + ranges = <0x0 0xc100 0x200>; + sleep = <&pmc 0x00000200 0>; + + dma-channel@0 { + compatible = "fsl,mpc8610-dma-channel", + "fsl,eloplus-dma-channel"; + cell-index = <0>; + reg = <0x0 0x80>; + interrupt-parent = <&mpic>; + interrupts = <76 2>; + }; + dma-channel@1 { + compatible = "fsl,mpc8610-dma-channel", + "fsl,eloplus-dma-channel"; + cell-index = <1>; + reg = <0x80 0x80>; + interrupt-parent = <&mpic>; + interrupts = <77 2>; + }; + dma-channel@2 { + compatible = "fsl,mpc8610-dma-channel", + "fsl,eloplus-dma-channel"; + cell-index = <2>; + reg = <0x100 0x80>; + interrupt-parent = <&mpic>; + interrupts = <78 2>; + }; + dma-channel@3 { + compatible = "fsl,mpc8610-dma-channel", + "fsl,eloplus-dma-channel"; + cell-index = <3>; + reg = <0x180 0x80>; + interrupt-parent = <&mpic>; + interrupts = <79 2>; + }; + }; + + }; + + pci0: pci@e0008000 { + compatible = "fsl,mpc8610-pci"; + device_type = "pci"; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + reg = <0xe0008000 0x1000>; + bus-range = <0 0>; + ranges = <0x02000000 0x0 0x80000000 0x80000000 0x0 0x10000000 + 0x01000000 0x0 0x00000000 0xe1000000 0x0 0x00100000>; + sleep = <&pmc 0x80000000 0>; + clock-frequency = <33333333>; + interrupt-parent = <&mpic>; + interrupts = <24 2>; + interrupt-map-mask = <0xf800 0 0 7>; + interrupt-map = < + /* IDSEL 0x11 */ + 0x8800 0 0 1 &mpic 4 1 + 0x8800 0 0 2 &mpic 5 1 + 0x8800 0 0 3 &mpic 6 1 + 0x8800 0 0 4 &mpic 7 1 + + /* IDSEL 0x12 */ + 0x9000 0 0 1 &mpic 5 1 + 0x9000 0 0 2 &mpic 6 1 + 0x9000 0 0 3 &mpic 7 1 + 0x9000 0 0 4 &mpic 4 1 + >; + }; + + pci1: pcie@e000a000 { + compatible = "fsl,mpc8641-pcie"; + device_type = "pci"; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + reg = <0xe000a000 0x1000>; + bus-range = <1 3>; + ranges = <0x02000000 0x0 0xa0000000 0xa0000000 0x0 0x10000000 + 0x01000000 0x0 0x00000000 0xe3000000 0x0 0x00100000>; + sleep = <&pmc 0x40000000 0>; + clock-frequency = <33333333>; + interrupt-parent = <&mpic>; + interrupts = <26 2>; + interrupt-map-mask = <0xf800 0 0 7>; + + interrupt-map = < + /* IDSEL 0x1b */ + 0xd800 0 0 1 &mpic 2 1 + + /* IDSEL 0x1c*/ + 0xe000 0 0 1 &mpic 1 1 + 0xe000 0 0 2 &mpic 1 1 + 0xe000 0 0 3 &mpic 1 1 + 0xe000 0 0 4 &mpic 1 1 + + /* IDSEL 0x1f */ + 0xf800 0 0 1 &mpic 3 2 + 0xf800 0 0 2 &mpic 0 1 + >; + + pcie@0 { + reg = <0 0 0 0 0>; + #size-cells = <2>; + #address-cells = <3>; + device_type = "pci"; + ranges = <0x02000000 0x0 0xa0000000 + 0x02000000 0x0 0xa0000000 + 0x0 0x10000000 + 0x01000000 0x0 0x00000000 + 0x01000000 0x0 0x00000000 + 0x0 0x00100000>; + uli1575@0 { + reg = <0 0 0 0 0>; + #size-cells = <2>; + #address-cells = <3>; + ranges = <0x02000000 0x0 0xa0000000 + 0x02000000 0x0 0xa0000000 + 0x0 0x10000000 + 0x01000000 0x0 0x00000000 + 0x01000000 0x0 0x00000000 + 0x0 0x00100000>; + + isa@1e { + device_type = "isa"; + #size-cells = <1>; + #address-cells = <2>; + reg = <0xf000 0 0 0 0>; + ranges = <1 0 0x01000000 0 0 + 0x00001000>; + + rtc@70 { + compatible = "pnpPNP,b00"; + reg = <1 0x70 2>; + }; + }; + }; + }; + }; + + pci2: pcie@e0009000 { + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + device_type = "pci"; + compatible = "fsl,mpc8641-pcie"; + reg = <0xe0009000 0x00001000>; + ranges = <0x02000000 0 0x90000000 0x90000000 0 0x10000000 + 0x01000000 0 0x00000000 0xe2000000 0 0x00100000>; + bus-range = <0 255>; + interrupt-map-mask = <0xf800 0 0 7>; + interrupt-map = <0x0000 0 0 1 &mpic 4 1 + 0x0000 0 0 2 &mpic 5 1 + 0x0000 0 0 3 &mpic 6 1 + 0x0000 0 0 4 &mpic 7 1>; + interrupt-parent = <&mpic>; + interrupts = <25 2>; + sleep = <&pmc 0x20000000 0>; + clock-frequency = <33333333>; + }; +}; diff --git a/arch/powerpc/boot/dts/mpc8641_hpcn.dts b/arch/powerpc/boot/dts/mpc8641_hpcn.dts new file mode 100644 index 000000000..1c03060dd --- /dev/null +++ b/arch/powerpc/boot/dts/mpc8641_hpcn.dts @@ -0,0 +1,663 @@ +/* + * MPC8641 HPCN Device Tree Source + * + * Copyright 2006 Freescale Semiconductor Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +/dts-v1/; + +/ { + model = "MPC8641HPCN"; + compatible = "fsl,mpc8641hpcn"; + #address-cells = <1>; + #size-cells = <1>; + + aliases { + ethernet0 = &enet0; + ethernet1 = &enet1; + ethernet2 = &enet2; + ethernet3 = &enet3; + serial0 = &serial0; + serial1 = &serial1; + pci0 = &pci0; + pci1 = &pci1; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + PowerPC,8641@0 { + device_type = "cpu"; + reg = <0>; + d-cache-line-size = <32>; + i-cache-line-size = <32>; + d-cache-size = <32768>; // L1 + i-cache-size = <32768>; // L1 + timebase-frequency = <0>; // From uboot + bus-frequency = <0>; // From uboot + clock-frequency = <0>; // From uboot + }; + PowerPC,8641@1 { + device_type = "cpu"; + reg = <1>; + d-cache-line-size = <32>; + i-cache-line-size = <32>; + d-cache-size = <32768>; + i-cache-size = <32768>; + timebase-frequency = <0>; // From uboot + bus-frequency = <0>; // From uboot + clock-frequency = <0>; // From uboot + }; + }; + + memory { + device_type = "memory"; + reg = <0x00000000 0x40000000>; // 1G at 0x0 + }; + + localbus@ffe05000 { + #address-cells = <2>; + #size-cells = <1>; + compatible = "fsl,mpc8641-localbus", "simple-bus"; + reg = <0xffe05000 0x1000>; + interrupts = <19 2>; + interrupt-parent = <&mpic>; + + ranges = <0 0 0xef800000 0x00800000 + 2 0 0xffdf8000 0x00008000 + 3 0 0xffdf0000 0x00008000>; + + flash@0,0 { + compatible = "cfi-flash"; + reg = <0 0 0x00800000>; + bank-width = <2>; + device-width = <2>; + #address-cells = <1>; + #size-cells = <1>; + partition@0 { + label = "kernel"; + reg = <0x00000000 0x00300000>; + }; + partition@300000 { + label = "firmware b"; + reg = <0x00300000 0x00100000>; + read-only; + }; + partition@400000 { + label = "fs"; + reg = <0x00400000 0x00300000>; + }; + partition@700000 { + label = "firmware a"; + reg = <0x00700000 0x00100000>; + read-only; + }; + }; + }; + + soc8641@ffe00000 { + #address-cells = <1>; + #size-cells = <1>; + device_type = "soc"; + compatible = "simple-bus"; + ranges = <0x00000000 0xffe00000 0x00100000>; + bus-frequency = <0>; + + mcm-law@0 { + compatible = "fsl,mcm-law"; + reg = <0x0 0x1000>; + fsl,num-laws = <10>; + }; + + mcm@1000 { + compatible = "fsl,mpc8641-mcm", "fsl,mcm"; + reg = <0x1000 0x1000>; + interrupts = <17 2>; + interrupt-parent = <&mpic>; + }; + + i2c@3000 { + #address-cells = <1>; + #size-cells = <0>; + cell-index = <0>; + compatible = "fsl-i2c"; + reg = <0x3000 0x100>; + interrupts = <43 2>; + interrupt-parent = <&mpic>; + dfsrr; + }; + + i2c@3100 { + #address-cells = <1>; + #size-cells = <0>; + cell-index = <1>; + compatible = "fsl-i2c"; + reg = <0x3100 0x100>; + interrupts = <43 2>; + interrupt-parent = <&mpic>; + dfsrr; + }; + + dma@21300 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,mpc8641-dma", "fsl,eloplus-dma"; + reg = <0x21300 0x4>; + ranges = <0x0 0x21100 0x200>; + cell-index = <0>; + dma-channel@0 { + compatible = "fsl,mpc8641-dma-channel", + "fsl,eloplus-dma-channel"; + reg = <0x0 0x80>; + cell-index = <0>; + interrupt-parent = <&mpic>; + interrupts = <20 2>; + }; + dma-channel@80 { + compatible = "fsl,mpc8641-dma-channel", + "fsl,eloplus-dma-channel"; + reg = <0x80 0x80>; + cell-index = <1>; + interrupt-parent = <&mpic>; + interrupts = <21 2>; + }; + dma-channel@100 { + compatible = "fsl,mpc8641-dma-channel", + "fsl,eloplus-dma-channel"; + reg = <0x100 0x80>; + cell-index = <2>; + interrupt-parent = <&mpic>; + interrupts = <22 2>; + }; + dma-channel@180 { + compatible = "fsl,mpc8641-dma-channel", + "fsl,eloplus-dma-channel"; + reg = <0x180 0x80>; + cell-index = <3>; + interrupt-parent = <&mpic>; + interrupts = <23 2>; + }; + }; + + enet0: ethernet@24000 { + #address-cells = <1>; + #size-cells = <1>; + cell-index = <0>; + device_type = "network"; + model = "TSEC"; + compatible = "gianfar"; + reg = <0x24000 0x1000>; + ranges = <0x0 0x24000 0x1000>; + local-mac-address = [ 00 00 00 00 00 00 ]; + interrupts = <29 2 30 2 34 2>; + interrupt-parent = <&mpic>; + tbi-handle = <&tbi0>; + phy-handle = <&phy0>; + phy-connection-type = "rgmii-id"; + + mdio@520 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,gianfar-mdio"; + reg = <0x520 0x20>; + + phy0: ethernet-phy@0 { + interrupt-parent = <&mpic>; + interrupts = <10 1>; + reg = <0>; + }; + phy1: ethernet-phy@1 { + interrupt-parent = <&mpic>; + interrupts = <10 1>; + reg = <1>; + }; + phy2: ethernet-phy@2 { + interrupt-parent = <&mpic>; + interrupts = <10 1>; + reg = <2>; + }; + phy3: ethernet-phy@3 { + interrupt-parent = <&mpic>; + interrupts = <10 1>; + reg = <3>; + }; + tbi0: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + }; + + enet1: ethernet@25000 { + #address-cells = <1>; + #size-cells = <1>; + cell-index = <1>; + device_type = "network"; + model = "TSEC"; + compatible = "gianfar"; + reg = <0x25000 0x1000>; + ranges = <0x0 0x25000 0x1000>; + local-mac-address = [ 00 00 00 00 00 00 ]; + interrupts = <35 2 36 2 40 2>; + interrupt-parent = <&mpic>; + tbi-handle = <&tbi1>; + phy-handle = <&phy1>; + phy-connection-type = "rgmii-id"; + + mdio@520 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,gianfar-tbi"; + reg = <0x520 0x20>; + + tbi1: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + }; + + enet2: ethernet@26000 { + #address-cells = <1>; + #size-cells = <1>; + cell-index = <2>; + device_type = "network"; + model = "TSEC"; + compatible = "gianfar"; + reg = <0x26000 0x1000>; + ranges = <0x0 0x26000 0x1000>; + local-mac-address = [ 00 00 00 00 00 00 ]; + interrupts = <31 2 32 2 33 2>; + interrupt-parent = <&mpic>; + tbi-handle = <&tbi2>; + phy-handle = <&phy2>; + phy-connection-type = "rgmii-id"; + + mdio@520 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,gianfar-tbi"; + reg = <0x520 0x20>; + + tbi2: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + }; + + enet3: ethernet@27000 { + #address-cells = <1>; + #size-cells = <1>; + cell-index = <3>; + device_type = "network"; + model = "TSEC"; + compatible = "gianfar"; + reg = <0x27000 0x1000>; + ranges = <0x0 0x27000 0x1000>; + local-mac-address = [ 00 00 00 00 00 00 ]; + interrupts = <37 2 38 2 39 2>; + interrupt-parent = <&mpic>; + tbi-handle = <&tbi3>; + phy-handle = <&phy3>; + phy-connection-type = "rgmii-id"; + + mdio@520 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,gianfar-tbi"; + reg = <0x520 0x20>; + + tbi3: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + }; + + serial0: serial@4500 { + cell-index = <0>; + device_type = "serial"; + compatible = "fsl,ns16550", "ns16550"; + reg = <0x4500 0x100>; + clock-frequency = <0>; + interrupts = <42 2>; + interrupt-parent = <&mpic>; + }; + + serial1: serial@4600 { + cell-index = <1>; + device_type = "serial"; + compatible = "fsl,ns16550", "ns16550"; + reg = <0x4600 0x100>; + clock-frequency = <0>; + interrupts = <28 2>; + interrupt-parent = <&mpic>; + }; + + mpic: pic@40000 { + interrupt-controller; + #address-cells = <0>; + #interrupt-cells = <2>; + reg = <0x40000 0x40000>; + compatible = "chrp,open-pic"; + device_type = "open-pic"; + }; + + rmu: rmu@d3000 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,srio-rmu"; + reg = <0xd3000 0x500>; + ranges = <0x0 0xd3000 0x500>; + + message-unit@0 { + compatible = "fsl,srio-msg-unit"; + reg = <0x0 0x100>; + interrupts = < + 53 2 /* msg1_tx_irq */ + 54 2>;/* msg1_rx_irq */ + }; + message-unit@100 { + compatible = "fsl,srio-msg-unit"; + reg = <0x100 0x100>; + interrupts = < + 55 2 /* msg2_tx_irq */ + 56 2>;/* msg2_rx_irq */ + }; + doorbell-unit@400 { + compatible = "fsl,srio-dbell-unit"; + reg = <0x400 0x80>; + interrupts = < + 49 2 /* bell_outb_irq */ + 50 2>;/* bell_inb_irq */ + }; + port-write-unit@4e0 { + compatible = "fsl,srio-port-write-unit"; + reg = <0x4e0 0x20>; + interrupts = <48 2>; + }; + }; + + global-utilities@e0000 { + compatible = "fsl,mpc8641-guts"; + reg = <0xe0000 0x1000>; + fsl,has-rstcr; + }; + }; + + pci0: pcie@ffe08000 { + compatible = "fsl,mpc8641-pcie"; + device_type = "pci"; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + reg = <0xffe08000 0x1000>; + bus-range = <0x0 0xff>; + ranges = <0x02000000 0x0 0x80000000 0x80000000 0x0 0x20000000 + 0x01000000 0x0 0x00000000 0xffc00000 0x0 0x00010000>; + clock-frequency = <33333333>; + interrupt-parent = <&mpic>; + interrupts = <24 2>; + interrupt-map-mask = <0xff00 0 0 7>; + interrupt-map = < + /* IDSEL 0x11 func 0 - PCI slot 1 */ + 0x8800 0 0 1 &mpic 2 1 + 0x8800 0 0 2 &mpic 3 1 + 0x8800 0 0 3 &mpic 4 1 + 0x8800 0 0 4 &mpic 1 1 + + /* IDSEL 0x11 func 1 - PCI slot 1 */ + 0x8900 0 0 1 &mpic 2 1 + 0x8900 0 0 2 &mpic 3 1 + 0x8900 0 0 3 &mpic 4 1 + 0x8900 0 0 4 &mpic 1 1 + + /* IDSEL 0x11 func 2 - PCI slot 1 */ + 0x8a00 0 0 1 &mpic 2 1 + 0x8a00 0 0 2 &mpic 3 1 + 0x8a00 0 0 3 &mpic 4 1 + 0x8a00 0 0 4 &mpic 1 1 + + /* IDSEL 0x11 func 3 - PCI slot 1 */ + 0x8b00 0 0 1 &mpic 2 1 + 0x8b00 0 0 2 &mpic 3 1 + 0x8b00 0 0 3 &mpic 4 1 + 0x8b00 0 0 4 &mpic 1 1 + + /* IDSEL 0x11 func 4 - PCI slot 1 */ + 0x8c00 0 0 1 &mpic 2 1 + 0x8c00 0 0 2 &mpic 3 1 + 0x8c00 0 0 3 &mpic 4 1 + 0x8c00 0 0 4 &mpic 1 1 + + /* IDSEL 0x11 func 5 - PCI slot 1 */ + 0x8d00 0 0 1 &mpic 2 1 + 0x8d00 0 0 2 &mpic 3 1 + 0x8d00 0 0 3 &mpic 4 1 + 0x8d00 0 0 4 &mpic 1 1 + + /* IDSEL 0x11 func 6 - PCI slot 1 */ + 0x8e00 0 0 1 &mpic 2 1 + 0x8e00 0 0 2 &mpic 3 1 + 0x8e00 0 0 3 &mpic 4 1 + 0x8e00 0 0 4 &mpic 1 1 + + /* IDSEL 0x11 func 7 - PCI slot 1 */ + 0x8f00 0 0 1 &mpic 2 1 + 0x8f00 0 0 2 &mpic 3 1 + 0x8f00 0 0 3 &mpic 4 1 + 0x8f00 0 0 4 &mpic 1 1 + + /* IDSEL 0x12 func 0 - PCI slot 2 */ + 0x9000 0 0 1 &mpic 3 1 + 0x9000 0 0 2 &mpic 4 1 + 0x9000 0 0 3 &mpic 1 1 + 0x9000 0 0 4 &mpic 2 1 + + /* IDSEL 0x12 func 1 - PCI slot 2 */ + 0x9100 0 0 1 &mpic 3 1 + 0x9100 0 0 2 &mpic 4 1 + 0x9100 0 0 3 &mpic 1 1 + 0x9100 0 0 4 &mpic 2 1 + + /* IDSEL 0x12 func 2 - PCI slot 2 */ + 0x9200 0 0 1 &mpic 3 1 + 0x9200 0 0 2 &mpic 4 1 + 0x9200 0 0 3 &mpic 1 1 + 0x9200 0 0 4 &mpic 2 1 + + /* IDSEL 0x12 func 3 - PCI slot 2 */ + 0x9300 0 0 1 &mpic 3 1 + 0x9300 0 0 2 &mpic 4 1 + 0x9300 0 0 3 &mpic 1 1 + 0x9300 0 0 4 &mpic 2 1 + + /* IDSEL 0x12 func 4 - PCI slot 2 */ + 0x9400 0 0 1 &mpic 3 1 + 0x9400 0 0 2 &mpic 4 1 + 0x9400 0 0 3 &mpic 1 1 + 0x9400 0 0 4 &mpic 2 1 + + /* IDSEL 0x12 func 5 - PCI slot 2 */ + 0x9500 0 0 1 &mpic 3 1 + 0x9500 0 0 2 &mpic 4 1 + 0x9500 0 0 3 &mpic 1 1 + 0x9500 0 0 4 &mpic 2 1 + + /* IDSEL 0x12 func 6 - PCI slot 2 */ + 0x9600 0 0 1 &mpic 3 1 + 0x9600 0 0 2 &mpic 4 1 + 0x9600 0 0 3 &mpic 1 1 + 0x9600 0 0 4 &mpic 2 1 + + /* IDSEL 0x12 func 7 - PCI slot 2 */ + 0x9700 0 0 1 &mpic 3 1 + 0x9700 0 0 2 &mpic 4 1 + 0x9700 0 0 3 &mpic 1 1 + 0x9700 0 0 4 &mpic 2 1 + + // IDSEL 0x1c USB + 0xe000 0 0 1 &i8259 12 2 + 0xe100 0 0 2 &i8259 9 2 + 0xe200 0 0 3 &i8259 10 2 + 0xe300 0 0 4 &i8259 11 2 + + // IDSEL 0x1d Audio + 0xe800 0 0 1 &i8259 6 2 + + // IDSEL 0x1e Legacy + 0xf000 0 0 1 &i8259 7 2 + 0xf100 0 0 1 &i8259 7 2 + + // IDSEL 0x1f IDE/SATA + 0xf800 0 0 1 &i8259 14 2 + 0xf900 0 0 1 &i8259 5 2 + >; + + pcie@0 { + reg = <0 0 0 0 0>; + #size-cells = <2>; + #address-cells = <3>; + device_type = "pci"; + ranges = <0x02000000 0x0 0x80000000 + 0x02000000 0x0 0x80000000 + 0x0 0x20000000 + + 0x01000000 0x0 0x00000000 + 0x01000000 0x0 0x00000000 + 0x0 0x00010000>; + uli1575@0 { + reg = <0 0 0 0 0>; + #size-cells = <2>; + #address-cells = <3>; + ranges = <0x02000000 0x0 0x80000000 + 0x02000000 0x0 0x80000000 + 0x0 0x20000000 + 0x01000000 0x0 0x00000000 + 0x01000000 0x0 0x00000000 + 0x0 0x00010000>; + isa@1e { + device_type = "isa"; + #interrupt-cells = <2>; + #size-cells = <1>; + #address-cells = <2>; + reg = <0xf000 0 0 0 0>; + ranges = <1 0 0x01000000 0 0 + 0x00001000>; + interrupt-parent = <&i8259>; + + i8259: interrupt-controller@20 { + reg = <1 0x20 2 + 1 0xa0 2 + 1 0x4d0 2>; + interrupt-controller; + device_type = "interrupt-controller"; + #address-cells = <0>; + #interrupt-cells = <2>; + compatible = "chrp,iic"; + interrupts = <9 2>; + interrupt-parent = <&mpic>; + }; + + i8042@60 { + #size-cells = <0>; + #address-cells = <1>; + reg = <1 0x60 1 1 0x64 1>; + interrupts = <1 3 12 3>; + interrupt-parent = + <&i8259>; + + keyboard@0 { + reg = <0>; + compatible = "pnpPNP,303"; + }; + + mouse@1 { + reg = <1>; + compatible = "pnpPNP,f03"; + }; + }; + + rtc@70 { + compatible = + "pnpPNP,b00"; + reg = <1 0x70 2>; + }; + + gpio@400 { + reg = <1 0x400 0x80>; + }; + }; + }; + }; + + }; + + pci1: pcie@ffe09000 { + compatible = "fsl,mpc8641-pcie"; + device_type = "pci"; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + reg = <0xffe09000 0x1000>; + bus-range = <0 0xff>; + ranges = <0x02000000 0x0 0xa0000000 0xa0000000 0x0 0x20000000 + 0x01000000 0x0 0x00000000 0xffc10000 0x0 0x00010000>; + clock-frequency = <33333333>; + interrupt-parent = <&mpic>; + interrupts = <25 2>; + interrupt-map-mask = <0xf800 0 0 7>; + interrupt-map = < + /* IDSEL 0x0 */ + 0x0000 0 0 1 &mpic 4 1 + 0x0000 0 0 2 &mpic 5 1 + 0x0000 0 0 3 &mpic 6 1 + 0x0000 0 0 4 &mpic 7 1 + >; + pcie@0 { + reg = <0 0 0 0 0>; + #size-cells = <2>; + #address-cells = <3>; + device_type = "pci"; + ranges = <0x02000000 0x0 0xa0000000 + 0x02000000 0x0 0xa0000000 + 0x0 0x20000000 + + 0x01000000 0x0 0x00000000 + 0x01000000 0x0 0x00000000 + 0x0 0x00010000>; + }; + }; +/* + * Only one of Rapid IO or PCI can be present due to HW limitations and + * due to the fact that the 2 now share address space in the new memory + * map. The most likely case is that we have PCI, so comment out the + * rapidio node. Leave it here for reference. + + rapidio@ffec0000 { + reg = <0xffec0000 0x11000>; + compatible = "fsl,srio"; + interrupt-parent = <&mpic>; + interrupts = <48 2>; + #address-cells = <2>; + #size-cells = <2>; + fsl,srio-rmu-handle = <&rmu>; + ranges; + + port1 { + #address-cells = <2>; + #size-cells = <2>; + cell-index = <1>; + ranges = <0 0 0x80000000 0 0x20000000>; + }; + }; +*/ + +}; diff --git a/arch/powerpc/boot/dts/mpc8641_hpcn_36b.dts b/arch/powerpc/boot/dts/mpc8641_hpcn_36b.dts new file mode 100644 index 000000000..bb575e280 --- /dev/null +++ b/arch/powerpc/boot/dts/mpc8641_hpcn_36b.dts @@ -0,0 +1,605 @@ +/* + * MPC8641 HPCN Device Tree Source + * + * Copyright 2008-2009 Freescale Semiconductor Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +/dts-v1/; + +/ { + model = "MPC8641HPCN"; + compatible = "fsl,mpc8641hpcn"; + #address-cells = <2>; + #size-cells = <2>; + + aliases { + ethernet0 = &enet0; + ethernet1 = &enet1; + ethernet2 = &enet2; + ethernet3 = &enet3; + serial0 = &serial0; + serial1 = &serial1; + pci0 = &pci0; + pci1 = &pci1; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + PowerPC,8641@0 { + device_type = "cpu"; + reg = <0>; + d-cache-line-size = <32>; // 32 bytes + i-cache-line-size = <32>; // 32 bytes + d-cache-size = <32768>; // L1, 32K + i-cache-size = <32768>; // L1, 32K + timebase-frequency = <0>; // 33 MHz, from uboot + bus-frequency = <0>; // From uboot + clock-frequency = <0>; // From uboot + }; + PowerPC,8641@1 { + device_type = "cpu"; + reg = <1>; + d-cache-line-size = <32>; // 32 bytes + i-cache-line-size = <32>; // 32 bytes + d-cache-size = <32768>; // L1, 32K + i-cache-size = <32768>; // L1, 32K + timebase-frequency = <0>; // 33 MHz, from uboot + bus-frequency = <0>; // From uboot + clock-frequency = <0>; // From uboot + }; + }; + + memory { + device_type = "memory"; + reg = <0x0 0x00000000 0x0 0x40000000>; // 1G at 0x0 + }; + + localbus@fffe05000 { + #address-cells = <2>; + #size-cells = <1>; + compatible = "fsl,mpc8641-localbus", "simple-bus"; + reg = <0x0f 0xffe05000 0x0 0x1000>; + interrupts = <19 2>; + interrupt-parent = <&mpic>; + + ranges = <0 0 0xf 0xef800000 0x00800000 + 2 0 0xf 0xffdf8000 0x00008000 + 3 0 0xf 0xffdf0000 0x00008000>; + + flash@0,0 { + compatible = "cfi-flash"; + reg = <0 0 0x00800000>; + bank-width = <2>; + device-width = <2>; + #address-cells = <1>; + #size-cells = <1>; + partition@0 { + label = "kernel"; + reg = <0x00000000 0x00300000>; + }; + partition@300000 { + label = "firmware b"; + reg = <0x00300000 0x00100000>; + read-only; + }; + partition@400000 { + label = "fs"; + reg = <0x00400000 0x00300000>; + }; + partition@700000 { + label = "firmware a"; + reg = <0x00700000 0x00100000>; + read-only; + }; + }; + }; + + soc8641@fffe00000 { + #address-cells = <1>; + #size-cells = <1>; + device_type = "soc"; + compatible = "simple-bus"; + ranges = <0x00000000 0x0f 0xffe00000 0x00100000>; + bus-frequency = <0>; + + mcm-law@0 { + compatible = "fsl,mcm-law"; + reg = <0x0 0x1000>; + fsl,num-laws = <10>; + }; + + mcm@1000 { + compatible = "fsl,mpc8641-mcm", "fsl,mcm"; + reg = <0x1000 0x1000>; + interrupts = <17 2>; + interrupt-parent = <&mpic>; + }; + + i2c@3000 { + #address-cells = <1>; + #size-cells = <0>; + cell-index = <0>; + compatible = "fsl-i2c"; + reg = <0x3000 0x100>; + interrupts = <43 2>; + interrupt-parent = <&mpic>; + dfsrr; + }; + + i2c@3100 { + #address-cells = <1>; + #size-cells = <0>; + cell-index = <1>; + compatible = "fsl-i2c"; + reg = <0x3100 0x100>; + interrupts = <43 2>; + interrupt-parent = <&mpic>; + dfsrr; + }; + + dma@21300 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,mpc8641-dma", "fsl,eloplus-dma"; + reg = <0x21300 0x4>; + ranges = <0x0 0x21100 0x200>; + cell-index = <0>; + dma-channel@0 { + compatible = "fsl,mpc8641-dma-channel", + "fsl,eloplus-dma-channel"; + reg = <0x0 0x80>; + cell-index = <0>; + interrupt-parent = <&mpic>; + interrupts = <20 2>; + }; + dma-channel@80 { + compatible = "fsl,mpc8641-dma-channel", + "fsl,eloplus-dma-channel"; + reg = <0x80 0x80>; + cell-index = <1>; + interrupt-parent = <&mpic>; + interrupts = <21 2>; + }; + dma-channel@100 { + compatible = "fsl,mpc8641-dma-channel", + "fsl,eloplus-dma-channel"; + reg = <0x100 0x80>; + cell-index = <2>; + interrupt-parent = <&mpic>; + interrupts = <22 2>; + }; + dma-channel@180 { + compatible = "fsl,mpc8641-dma-channel", + "fsl,eloplus-dma-channel"; + reg = <0x180 0x80>; + cell-index = <3>; + interrupt-parent = <&mpic>; + interrupts = <23 2>; + }; + }; + + enet0: ethernet@24000 { + #address-cells = <1>; + #size-cells = <1>; + cell-index = <0>; + device_type = "network"; + model = "TSEC"; + compatible = "gianfar"; + reg = <0x24000 0x1000>; + ranges = <0x0 0x24000 0x1000>; + local-mac-address = [ 00 00 00 00 00 00 ]; + interrupts = <29 2 30 2 34 2>; + interrupt-parent = <&mpic>; + tbi-handle = <&tbi0>; + phy-handle = <&phy0>; + phy-connection-type = "rgmii-id"; + + mdio@520 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,gianfar-mdio"; + reg = <0x520 0x20>; + + phy0: ethernet-phy@0 { + interrupt-parent = <&mpic>; + interrupts = <10 1>; + reg = <0>; + }; + phy1: ethernet-phy@1 { + interrupt-parent = <&mpic>; + interrupts = <10 1>; + reg = <1>; + }; + phy2: ethernet-phy@2 { + interrupt-parent = <&mpic>; + interrupts = <10 1>; + reg = <2>; + }; + phy3: ethernet-phy@3 { + interrupt-parent = <&mpic>; + interrupts = <10 1>; + reg = <3>; + }; + tbi0: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + }; + + enet1: ethernet@25000 { + #address-cells = <1>; + #size-cells = <1>; + cell-index = <1>; + device_type = "network"; + model = "TSEC"; + compatible = "gianfar"; + reg = <0x25000 0x1000>; + ranges = <0x0 0x25000 0x1000>; + local-mac-address = [ 00 00 00 00 00 00 ]; + interrupts = <35 2 36 2 40 2>; + interrupt-parent = <&mpic>; + tbi-handle = <&tbi1>; + phy-handle = <&phy1>; + phy-connection-type = "rgmii-id"; + + mdio@520 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,gianfar-tbi"; + reg = <0x520 0x20>; + + tbi1: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + }; + + enet2: ethernet@26000 { + #address-cells = <1>; + #size-cells = <1>; + cell-index = <2>; + device_type = "network"; + model = "TSEC"; + compatible = "gianfar"; + reg = <0x26000 0x1000>; + ranges = <0x0 0x26000 0x1000>; + local-mac-address = [ 00 00 00 00 00 00 ]; + interrupts = <31 2 32 2 33 2>; + interrupt-parent = <&mpic>; + tbi-handle = <&tbi2>; + phy-handle = <&phy2>; + phy-connection-type = "rgmii-id"; + + mdio@520 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,gianfar-tbi"; + reg = <0x520 0x20>; + + tbi2: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + }; + + enet3: ethernet@27000 { + #address-cells = <1>; + #size-cells = <1>; + cell-index = <3>; + device_type = "network"; + model = "TSEC"; + compatible = "gianfar"; + reg = <0x27000 0x1000>; + ranges = <0x0 0x27000 0x1000>; + local-mac-address = [ 00 00 00 00 00 00 ]; + interrupts = <37 2 38 2 39 2>; + interrupt-parent = <&mpic>; + tbi-handle = <&tbi3>; + phy-handle = <&phy3>; + phy-connection-type = "rgmii-id"; + + mdio@520 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,gianfar-tbi"; + reg = <0x520 0x20>; + + tbi3: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + }; + + serial0: serial@4500 { + cell-index = <0>; + device_type = "serial"; + compatible = "fsl,ns16550", "ns16550"; + reg = <0x4500 0x100>; + clock-frequency = <0>; + interrupts = <42 2>; + interrupt-parent = <&mpic>; + }; + + serial1: serial@4600 { + cell-index = <1>; + device_type = "serial"; + compatible = "fsl,ns16550", "ns16550"; + reg = <0x4600 0x100>; + clock-frequency = <0>; + interrupts = <28 2>; + interrupt-parent = <&mpic>; + }; + + mpic: pic@40000 { + interrupt-controller; + #address-cells = <0>; + #interrupt-cells = <2>; + reg = <0x40000 0x40000>; + compatible = "chrp,open-pic"; + device_type = "open-pic"; + }; + + global-utilities@e0000 { + compatible = "fsl,mpc8641-guts"; + reg = <0xe0000 0x1000>; + fsl,has-rstcr; + }; + }; + + pci0: pcie@fffe08000 { + cell-index = <0>; + compatible = "fsl,mpc8641-pcie"; + device_type = "pci"; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + reg = <0x0f 0xffe08000 0x0 0x1000>; + bus-range = <0x0 0xff>; + ranges = <0x02000000 0x0 0xe0000000 0x0c 0x00000000 0x0 0x20000000 + 0x01000000 0x0 0x00000000 0x0f 0xffc00000 0x0 0x00010000>; + clock-frequency = <33333333>; + interrupt-parent = <&mpic>; + interrupts = <24 2>; + interrupt-map-mask = <0xff00 0 0 7>; + interrupt-map = < + /* IDSEL 0x11 func 0 - PCI slot 1 */ + 0x8800 0 0 1 &mpic 2 1 + 0x8800 0 0 2 &mpic 3 1 + 0x8800 0 0 3 &mpic 4 1 + 0x8800 0 0 4 &mpic 1 1 + + /* IDSEL 0x11 func 1 - PCI slot 1 */ + 0x8900 0 0 1 &mpic 2 1 + 0x8900 0 0 2 &mpic 3 1 + 0x8900 0 0 3 &mpic 4 1 + 0x8900 0 0 4 &mpic 1 1 + + /* IDSEL 0x11 func 2 - PCI slot 1 */ + 0x8a00 0 0 1 &mpic 2 1 + 0x8a00 0 0 2 &mpic 3 1 + 0x8a00 0 0 3 &mpic 4 1 + 0x8a00 0 0 4 &mpic 1 1 + + /* IDSEL 0x11 func 3 - PCI slot 1 */ + 0x8b00 0 0 1 &mpic 2 1 + 0x8b00 0 0 2 &mpic 3 1 + 0x8b00 0 0 3 &mpic 4 1 + 0x8b00 0 0 4 &mpic 1 1 + + /* IDSEL 0x11 func 4 - PCI slot 1 */ + 0x8c00 0 0 1 &mpic 2 1 + 0x8c00 0 0 2 &mpic 3 1 + 0x8c00 0 0 3 &mpic 4 1 + 0x8c00 0 0 4 &mpic 1 1 + + /* IDSEL 0x11 func 5 - PCI slot 1 */ + 0x8d00 0 0 1 &mpic 2 1 + 0x8d00 0 0 2 &mpic 3 1 + 0x8d00 0 0 3 &mpic 4 1 + 0x8d00 0 0 4 &mpic 1 1 + + /* IDSEL 0x11 func 6 - PCI slot 1 */ + 0x8e00 0 0 1 &mpic 2 1 + 0x8e00 0 0 2 &mpic 3 1 + 0x8e00 0 0 3 &mpic 4 1 + 0x8e00 0 0 4 &mpic 1 1 + + /* IDSEL 0x11 func 7 - PCI slot 1 */ + 0x8f00 0 0 1 &mpic 2 1 + 0x8f00 0 0 2 &mpic 3 1 + 0x8f00 0 0 3 &mpic 4 1 + 0x8f00 0 0 4 &mpic 1 1 + + /* IDSEL 0x12 func 0 - PCI slot 2 */ + 0x9000 0 0 1 &mpic 3 1 + 0x9000 0 0 2 &mpic 4 1 + 0x9000 0 0 3 &mpic 1 1 + 0x9000 0 0 4 &mpic 2 1 + + /* IDSEL 0x12 func 1 - PCI slot 2 */ + 0x9100 0 0 1 &mpic 3 1 + 0x9100 0 0 2 &mpic 4 1 + 0x9100 0 0 3 &mpic 1 1 + 0x9100 0 0 4 &mpic 2 1 + + /* IDSEL 0x12 func 2 - PCI slot 2 */ + 0x9200 0 0 1 &mpic 3 1 + 0x9200 0 0 2 &mpic 4 1 + 0x9200 0 0 3 &mpic 1 1 + 0x9200 0 0 4 &mpic 2 1 + + /* IDSEL 0x12 func 3 - PCI slot 2 */ + 0x9300 0 0 1 &mpic 3 1 + 0x9300 0 0 2 &mpic 4 1 + 0x9300 0 0 3 &mpic 1 1 + 0x9300 0 0 4 &mpic 2 1 + + /* IDSEL 0x12 func 4 - PCI slot 2 */ + 0x9400 0 0 1 &mpic 3 1 + 0x9400 0 0 2 &mpic 4 1 + 0x9400 0 0 3 &mpic 1 1 + 0x9400 0 0 4 &mpic 2 1 + + /* IDSEL 0x12 func 5 - PCI slot 2 */ + 0x9500 0 0 1 &mpic 3 1 + 0x9500 0 0 2 &mpic 4 1 + 0x9500 0 0 3 &mpic 1 1 + 0x9500 0 0 4 &mpic 2 1 + + /* IDSEL 0x12 func 6 - PCI slot 2 */ + 0x9600 0 0 1 &mpic 3 1 + 0x9600 0 0 2 &mpic 4 1 + 0x9600 0 0 3 &mpic 1 1 + 0x9600 0 0 4 &mpic 2 1 + + /* IDSEL 0x12 func 7 - PCI slot 2 */ + 0x9700 0 0 1 &mpic 3 1 + 0x9700 0 0 2 &mpic 4 1 + 0x9700 0 0 3 &mpic 1 1 + 0x9700 0 0 4 &mpic 2 1 + + // IDSEL 0x1c USB + 0xe000 0 0 1 &i8259 12 2 + 0xe100 0 0 2 &i8259 9 2 + 0xe200 0 0 3 &i8259 10 2 + 0xe300 0 0 4 &i8259 11 2 + + // IDSEL 0x1d Audio + 0xe800 0 0 1 &i8259 6 2 + + // IDSEL 0x1e Legacy + 0xf000 0 0 1 &i8259 7 2 + 0xf100 0 0 1 &i8259 7 2 + + // IDSEL 0x1f IDE/SATA + 0xf800 0 0 1 &i8259 14 2 + 0xf900 0 0 1 &i8259 5 2 + >; + + pcie@0 { + reg = <0 0 0 0 0>; + #size-cells = <2>; + #address-cells = <3>; + device_type = "pci"; + ranges = <0x02000000 0x0 0xe0000000 + 0x02000000 0x0 0xe0000000 + 0x0 0x20000000 + + 0x01000000 0x0 0x00000000 + 0x01000000 0x0 0x00000000 + 0x0 0x00010000>; + uli1575@0 { + reg = <0 0 0 0 0>; + #size-cells = <2>; + #address-cells = <3>; + ranges = <0x02000000 0x0 0xe0000000 + 0x02000000 0x0 0xe0000000 + 0x0 0x20000000 + 0x01000000 0x0 0x00000000 + 0x01000000 0x0 0x00000000 + 0x0 0x00010000>; + isa@1e { + device_type = "isa"; + #interrupt-cells = <2>; + #size-cells = <1>; + #address-cells = <2>; + reg = <0xf000 0 0 0 0>; + ranges = <1 0 0x01000000 0 0 + 0x00001000>; + interrupt-parent = <&i8259>; + + i8259: interrupt-controller@20 { + reg = <1 0x20 2 + 1 0xa0 2 + 1 0x4d0 2>; + interrupt-controller; + device_type = "interrupt-controller"; + #address-cells = <0>; + #interrupt-cells = <2>; + compatible = "chrp,iic"; + interrupts = <9 2>; + interrupt-parent = <&mpic>; + }; + + i8042@60 { + #size-cells = <0>; + #address-cells = <1>; + reg = <1 0x60 1 1 0x64 1>; + interrupts = <1 3 12 3>; + interrupt-parent = + <&i8259>; + + keyboard@0 { + reg = <0>; + compatible = "pnpPNP,303"; + }; + + mouse@1 { + reg = <1>; + compatible = "pnpPNP,f03"; + }; + }; + + rtc@70 { + compatible = + "pnpPNP,b00"; + reg = <1 0x70 2>; + }; + + gpio@400 { + reg = <1 0x400 0x80>; + }; + }; + }; + }; + + }; + + pci1: pcie@fffe09000 { + cell-index = <1>; + compatible = "fsl,mpc8641-pcie"; + device_type = "pci"; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + reg = <0x0f 0xffe09000 0x0 0x1000>; + bus-range = <0x0 0xff>; + ranges = <0x02000000 0x0 0xe0000000 0x0c 0x20000000 0x0 0x20000000 + 0x01000000 0x0 0x00000000 0x0f 0xffc10000 0x0 0x00010000>; + clock-frequency = <33333333>; + interrupt-parent = <&mpic>; + interrupts = <25 2>; + interrupt-map-mask = <0xf800 0 0 7>; + interrupt-map = < + /* IDSEL 0x0 */ + 0x0000 0 0 1 &mpic 4 1 + 0x0000 0 0 2 &mpic 5 1 + 0x0000 0 0 3 &mpic 6 1 + 0x0000 0 0 4 &mpic 7 1 + >; + pcie@0 { + reg = <0 0 0 0 0>; + #size-cells = <2>; + #address-cells = <3>; + device_type = "pci"; + ranges = <0x02000000 0x0 0xe0000000 + 0x02000000 0x0 0xe0000000 + 0x0 0x20000000 + + 0x01000000 0x0 0x00000000 + 0x01000000 0x0 0x00000000 + 0x0 0x00010000>; + }; + }; +}; diff --git a/arch/powerpc/boot/dts/mpc866ads.dts b/arch/powerpc/boot/dts/mpc866ads.dts new file mode 100644 index 000000000..34c1f48b1 --- /dev/null +++ b/arch/powerpc/boot/dts/mpc866ads.dts @@ -0,0 +1,190 @@ +/* + * MPC866 ADS Device Tree Source + * + * Copyright 2006 MontaVista Software, Inc. + * Copyright 2008 Freescale Semiconductor, Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +/dts-v1/; + +/ { + model = "MPC866ADS"; + compatible = "fsl,mpc866ads"; + #address-cells = <1>; + #size-cells = <1>; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + PowerPC,866@0 { + device_type = "cpu"; + reg = <0x0>; + d-cache-line-size = <16>; // 16 bytes + i-cache-line-size = <16>; // 16 bytes + d-cache-size = <0x2000>; // L1, 8K + i-cache-size = <0x4000>; // L1, 16K + timebase-frequency = <0>; + bus-frequency = <0>; + clock-frequency = <0>; + interrupts = <15 2>; // decrementer interrupt + interrupt-parent = <&PIC>; + }; + }; + + memory { + device_type = "memory"; + reg = <0x0 0x800000>; + }; + + localbus@ff000100 { + compatible = "fsl,mpc866-localbus", "fsl,pq1-localbus"; + #address-cells = <2>; + #size-cells = <1>; + reg = <0xff000100 0x40>; + + ranges = < + 0x1 0x0 0xff080000 0x8000 + 0x5 0x0 0xff0a0000 0x8000 + >; + + board-control@1,0 { + reg = <0x1 0x0 0x20 0x5 0x300 0x4>; + compatible = "fsl,mpc866ads-bcsr"; + }; + }; + + soc@ff000000 { + #address-cells = <1>; + #size-cells = <1>; + device_type = "soc"; + ranges = <0x0 0xff000000 0x100000>; + reg = <0xff000000 0x200>; + bus-frequency = <0>; + + mdio@e00 { + compatible = "fsl,mpc866-fec-mdio", "fsl,pq1-fec-mdio"; + reg = <0xe00 0x188>; + #address-cells = <1>; + #size-cells = <0>; + PHY: ethernet-phy@f { + reg = <0xf>; + }; + }; + + ethernet@e00 { + device_type = "network"; + compatible = "fsl,mpc866-fec-enet", + "fsl,pq1-fec-enet"; + reg = <0xe00 0x188>; + local-mac-address = [ 00 00 00 00 00 00 ]; + interrupts = <3 1>; + interrupt-parent = <&PIC>; + phy-handle = <&PHY>; + linux,network-index = <0>; + }; + + PIC: pic@0 { + interrupt-controller; + #interrupt-cells = <2>; + reg = <0x0 0x24>; + compatible = "fsl,mpc866-pic", "fsl,pq1-pic"; + }; + + cpm@9c0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,mpc866-cpm", "fsl,cpm1"; + ranges; + reg = <0x9c0 0x40>; + brg-frequency = <0>; + interrupts = <0 2>; // cpm error interrupt + interrupt-parent = <&CPM_PIC>; + + muram@2000 { + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x2000 0x2000>; + + data@0 { + compatible = "fsl,cpm-muram-data"; + reg = <0x0 0x1c00>; + }; + }; + + brg@9f0 { + compatible = "fsl,mpc866-brg", + "fsl,cpm1-brg", + "fsl,cpm-brg"; + reg = <0x9f0 0x10>; + clock-frequency = <0>; + }; + + CPM_PIC: pic@930 { + interrupt-controller; + #address-cells = <0>; + #interrupt-cells = <1>; + interrupts = <5 2 0 2>; + interrupt-parent = <&PIC>; + reg = <0x930 0x20>; + compatible = "fsl,mpc866-cpm-pic", + "fsl,cpm1-pic"; + }; + + + serial@a80 { + device_type = "serial"; + compatible = "fsl,mpc866-smc-uart", + "fsl,cpm1-smc-uart"; + reg = <0xa80 0x10 0x3e80 0x40>; + interrupts = <4>; + interrupt-parent = <&CPM_PIC>; + fsl,cpm-brg = <1>; + fsl,cpm-command = <0x90>; + }; + + serial@a90 { + device_type = "serial"; + compatible = "fsl,mpc866-smc-uart", + "fsl,cpm1-smc-uart"; + reg = <0xa90 0x10 0x3f80 0x40>; + interrupts = <3>; + interrupt-parent = <&CPM_PIC>; + fsl,cpm-brg = <2>; + fsl,cpm-command = <0xd0>; + }; + + ethernet@a00 { + device_type = "network"; + compatible = "fsl,mpc866-scc-enet", + "fsl,cpm1-scc-enet"; + reg = <0xa00 0x18 0x3c00 0x100>; + local-mac-address = [ 00 00 00 00 00 00 ]; + interrupts = <30>; + interrupt-parent = <&CPM_PIC>; + fsl,cpm-command = <0000>; + linux,network-index = <1>; + }; + + i2c@860 { + compatible = "fsl,mpc866-i2c", + "fsl,cpm1-i2c"; + reg = <0x860 0x20 0x3c80 0x30>; + interrupts = <16>; + interrupt-parent = <&CPM_PIC>; + fsl,cpm-command = <0x10>; + #address-cells = <1>; + #size-cells = <0>; + }; + }; + }; + + chosen { + linux,stdout-path = "/soc/cpm/serial@a80"; + }; +}; diff --git a/arch/powerpc/boot/dts/mpc885ads.dts b/arch/powerpc/boot/dts/mpc885ads.dts new file mode 100644 index 000000000..4e93bd961 --- /dev/null +++ b/arch/powerpc/boot/dts/mpc885ads.dts @@ -0,0 +1,232 @@ +/* + * MPC885 ADS Device Tree Source + * + * Copyright 2006 MontaVista Software, Inc. + * Copyright 2007,2008 Freescale Semiconductor, Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +/dts-v1/; + +/ { + model = "MPC885ADS"; + compatible = "fsl,mpc885ads"; + #address-cells = <1>; + #size-cells = <1>; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + PowerPC,885@0 { + device_type = "cpu"; + reg = <0x0>; + d-cache-line-size = <16>; + i-cache-line-size = <16>; + d-cache-size = <8192>; + i-cache-size = <8192>; + timebase-frequency = <0>; + bus-frequency = <0>; + clock-frequency = <0>; + interrupts = <15 2>; // decrementer interrupt + interrupt-parent = <&PIC>; + }; + }; + + memory { + device_type = "memory"; + reg = <0x0 0x0>; + }; + + localbus@ff000100 { + compatible = "fsl,mpc885-localbus", "fsl,pq1-localbus"; + #address-cells = <2>; + #size-cells = <1>; + reg = <0xff000100 0x40>; + + ranges = < + 0x0 0x0 0xfe000000 0x800000 + 0x1 0x0 0xff080000 0x8000 + 0x5 0x0 0xff0a0000 0x8000 + >; + + flash@0,0 { + compatible = "jedec-flash"; + reg = <0x0 0x0 0x800000>; + bank-width = <4>; + device-width = <1>; + }; + + board-control@1,0 { + reg = <0x1 0x0 0x20 0x5 0x300 0x4>; + compatible = "fsl,mpc885ads-bcsr"; + }; + }; + + soc@ff000000 { + compatible = "fsl,mpc885", "fsl,pq1-soc"; + #address-cells = <1>; + #size-cells = <1>; + device_type = "soc"; + ranges = <0x0 0xff000000 0x4000>; + bus-frequency = <0>; + + // Temporary -- will go away once kernel uses ranges for get_immrbase(). + reg = <0xff000000 0x4000>; + + mdio@e00 { + compatible = "fsl,mpc885-fec-mdio", "fsl,pq1-fec-mdio"; + reg = <0xe00 0x188>; + #address-cells = <1>; + #size-cells = <0>; + + PHY0: ethernet-phy@0 { + reg = <0x0>; + }; + + PHY1: ethernet-phy@1 { + reg = <0x1>; + }; + + PHY2: ethernet-phy@2 { + reg = <0x2>; + }; + }; + + ethernet@e00 { + device_type = "network"; + compatible = "fsl,mpc885-fec-enet", + "fsl,pq1-fec-enet"; + reg = <0xe00 0x188>; + local-mac-address = [ 00 00 00 00 00 00 ]; + interrupts = <3 1>; + interrupt-parent = <&PIC>; + phy-handle = <&PHY0>; + linux,network-index = <0>; + }; + + ethernet@1e00 { + device_type = "network"; + compatible = "fsl,mpc885-fec-enet", + "fsl,pq1-fec-enet"; + reg = <0x1e00 0x188>; + local-mac-address = [ 00 00 00 00 00 00 ]; + interrupts = <7 1>; + interrupt-parent = <&PIC>; + phy-handle = <&PHY1>; + linux,network-index = <1>; + }; + + PIC: interrupt-controller@0 { + interrupt-controller; + #interrupt-cells = <2>; + reg = <0x0 0x24>; + compatible = "fsl,mpc885-pic", "fsl,pq1-pic"; + }; + + pcmcia@80 { + #address-cells = <3>; + #interrupt-cells = <1>; + #size-cells = <2>; + compatible = "fsl,pq-pcmcia"; + device_type = "pcmcia"; + reg = <0x80 0x80>; + interrupt-parent = <&PIC>; + interrupts = <13 1>; + }; + + cpm@9c0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,mpc885-cpm", "fsl,cpm1"; + command-proc = <0x9c0>; + interrupts = <0>; // cpm error interrupt + interrupt-parent = <&CPM_PIC>; + reg = <0x9c0 0x40>; + ranges; + + muram@2000 { + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x2000 0x2000>; + + data@0 { + compatible = "fsl,cpm-muram-data"; + reg = <0x0 0x1c00>; + }; + }; + + brg@9f0 { + compatible = "fsl,mpc885-brg", + "fsl,cpm1-brg", + "fsl,cpm-brg"; + clock-frequency = <0>; + reg = <0x9f0 0x10>; + }; + + CPM_PIC: interrupt-controller@930 { + interrupt-controller; + #interrupt-cells = <1>; + interrupts = <5 2 0 2>; + interrupt-parent = <&PIC>; + reg = <0x930 0x20>; + compatible = "fsl,mpc885-cpm-pic", + "fsl,cpm1-pic"; + }; + + serial@a80 { + device_type = "serial"; + compatible = "fsl,mpc885-smc-uart", + "fsl,cpm1-smc-uart"; + reg = <0xa80 0x10 0x3e80 0x40>; + interrupts = <4>; + interrupt-parent = <&CPM_PIC>; + fsl,cpm-brg = <1>; + fsl,cpm-command = <0x90>; + }; + + serial@a90 { + device_type = "serial"; + compatible = "fsl,mpc885-smc-uart", + "fsl,cpm1-smc-uart"; + reg = <0xa90 0x10 0x3f80 0x40>; + interrupts = <3>; + interrupt-parent = <&CPM_PIC>; + fsl,cpm-brg = <2>; + fsl,cpm-command = <0xd0>; + }; + + ethernet@a40 { + device_type = "network"; + compatible = "fsl,mpc885-scc-enet", + "fsl,cpm1-scc-enet"; + reg = <0xa40 0x18 0x3e00 0x100>; + local-mac-address = [ 00 00 00 00 00 00 ]; + interrupts = <28>; + interrupt-parent = <&CPM_PIC>; + phy-handle = <&PHY2>; + fsl,cpm-command = <0x80>; + linux,network-index = <2>; + }; + + i2c@860 { + compatible = "fsl,mpc885-i2c", + "fsl,cpm1-i2c"; + reg = <0x860 0x20 0x3c80 0x30>; + interrupts = <16>; + interrupt-parent = <&CPM_PIC>; + fsl,cpm-command = <0x10>; + #address-cells = <1>; + #size-cells = <0>; + }; + }; + }; + + chosen { + linux,stdout-path = "/soc/cpm/serial@a80"; + }; +}; diff --git a/arch/powerpc/boot/dts/mucmc52.dts b/arch/powerpc/boot/dts/mucmc52.dts new file mode 100644 index 000000000..d3a792bb5 --- /dev/null +++ b/arch/powerpc/boot/dts/mucmc52.dts @@ -0,0 +1,226 @@ +/* + * Manroland mucmc52 board Device Tree Source + * + * Copyright (C) 2009 DENX Software Engineering GmbH + * Heiko Schocher <hs@denx.de> + * Copyright 2006-2007 Secret Lab Technologies Ltd. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +/include/ "mpc5200b.dtsi" + +/* Timer pins that need to be in GPIO mode */ +&gpt0 { gpio-controller; }; +&gpt1 { gpio-controller; }; +&gpt2 { gpio-controller; }; +&gpt3 { gpio-controller; }; + +/* Disabled timers */ +&gpt4 { status = "disabled"; }; +&gpt5 { status = "disabled"; }; +&gpt6 { status = "disabled"; }; +&gpt7 { status = "disabled"; }; + +/ { + model = "manroland,mucmc52"; + compatible = "manroland,mucmc52"; + + soc5200@f0000000 { + rtc@800 { + status = "disabled"; + }; + + can@900 { + status = "disabled"; + }; + + can@980 { + status = "disabled"; + }; + + spi@f00 { + status = "disabled"; + }; + + usb@1000 { + status = "disabled"; + }; + + psc@2000 { // PSC1 + compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart"; + }; + + psc@2200 { // PSC2 + compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart"; + }; + + psc@2400 { // PSC3 + status = "disabled"; + }; + + psc@2600 { // PSC4 + status = "disabled"; + }; + + psc@2800 { // PSC5 + status = "disabled"; + }; + + psc@2c00 { // PSC6 + compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart"; + }; + + ethernet@3000 { + phy-handle = <&phy0>; + }; + + mdio@3000 { + phy0: ethernet-phy@0 { + compatible = "intel,lxt971"; + reg = <0>; + }; + }; + + i2c@3d00 { + status = "disabled"; + }; + + i2c@3d40 { + hwmon@2c { + compatible = "ad,adm9240"; + reg = <0x2c>; + }; + rtc@51 { + compatible = "nxp,pcf8563"; + reg = <0x51>; + }; + }; + }; + + pci@f0000d00 { + interrupt-map-mask = <0xf800 0 0 7>; + interrupt-map = < + /* IDSEL 0x10 */ + 0x8000 0 0 1 &mpc5200_pic 0 3 3 + 0x8000 0 0 2 &mpc5200_pic 0 3 3 + 0x8000 0 0 3 &mpc5200_pic 0 2 3 + 0x8000 0 0 4 &mpc5200_pic 0 1 3 + >; + ranges = <0x42000000 0 0x60000000 0x60000000 0 0x10000000 + 0x02000000 0 0x90000000 0x90000000 0 0x10000000 + 0x01000000 0 0x00000000 0xa0000000 0 0x01000000>; + }; + + localbus { + ranges = <0 0 0xff800000 0x00800000 + 1 0 0x80000000 0x00800000 + 3 0 0x80000000 0x00800000>; + + flash@0,0 { + compatible = "cfi-flash"; + reg = <0 0 0x00800000>; + bank-width = <4>; + device-width = <2>; + #size-cells = <1>; + #address-cells = <1>; + partition@0 { + label = "DTS"; + reg = <0x0 0x00100000>; + }; + partition@100000 { + label = "Kernel"; + reg = <0x100000 0x00200000>; + }; + partition@300000 { + label = "RootFS"; + reg = <0x00300000 0x00200000>; + }; + partition@500000 { + label = "user"; + reg = <0x00500000 0x00200000>; + }; + partition@700000 { + label = "U-Boot"; + reg = <0x00700000 0x00040000>; + }; + partition@740000 { + label = "Env"; + reg = <0x00740000 0x00020000>; + }; + partition@760000 { + label = "red. Env"; + reg = <0x00760000 0x00020000>; + }; + partition@780000 { + label = "reserve"; + reg = <0x00780000 0x00080000>; + }; + }; + + simple100: gpio-controller-100@3,600100 { + compatible = "manroland,mucmc52-aux-gpio"; + reg = <3 0x00600100 0x1>; + gpio-controller; + #gpio-cells = <2>; + }; + simple104: gpio-controller-104@3,600104 { + compatible = "manroland,mucmc52-aux-gpio"; + reg = <3 0x00600104 0x1>; + gpio-controller; + #gpio-cells = <2>; + }; + simple200: gpio-controller-200@3,600200 { + compatible = "manroland,mucmc52-aux-gpio"; + reg = <3 0x00600200 0x1>; + gpio-controller; + #gpio-cells = <2>; + }; + simple201: gpio-controller-201@3,600201 { + compatible = "manroland,mucmc52-aux-gpio"; + reg = <3 0x00600201 0x1>; + gpio-controller; + #gpio-cells = <2>; + }; + simple202: gpio-controller-202@3,600202 { + compatible = "manroland,mucmc52-aux-gpio"; + reg = <3 0x00600202 0x1>; + gpio-controller; + #gpio-cells = <2>; + }; + simple203: gpio-controller-203@3,600203 { + compatible = "manroland,mucmc52-aux-gpio"; + reg = <3 0x00600203 0x1>; + gpio-controller; + #gpio-cells = <2>; + }; + simple204: gpio-controller-204@3,600204 { + compatible = "manroland,mucmc52-aux-gpio"; + reg = <3 0x00600204 0x1>; + gpio-controller; + #gpio-cells = <2>; + }; + simple206: gpio-controller-206@3,600206 { + compatible = "manroland,mucmc52-aux-gpio"; + reg = <3 0x00600206 0x1>; + gpio-controller; + #gpio-cells = <2>; + }; + simple207: gpio-controller-207@3,600207 { + compatible = "manroland,mucmc52-aux-gpio"; + reg = <3 0x00600207 0x1>; + gpio-controller; + #gpio-cells = <2>; + }; + simple20f: gpio-controller-20f@3,60020f { + compatible = "manroland,mucmc52-aux-gpio"; + reg = <3 0x0060020f 0x1>; + gpio-controller; + #gpio-cells = <2>; + }; + + }; +}; diff --git a/arch/powerpc/boot/dts/mvme2500.dts b/arch/powerpc/boot/dts/mvme2500.dts new file mode 100644 index 000000000..67714cf0f --- /dev/null +++ b/arch/powerpc/boot/dts/mvme2500.dts @@ -0,0 +1,280 @@ +/* + * Device tree source for the Emerson/Artesyn MVME2500 + * + * Copyright 2014 Elettra-Sincrotrone Trieste S.C.p.A. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * Based on: P2020 DS Device Tree Source + * Copyright 2009 Freescale Semiconductor Inc. + */ + +/include/ "fsl/p2020si-pre.dtsi" + +/ { + model = "MVME2500"; + compatible = "artesyn,MVME2500"; + + aliases { + serial2 = &serial2; + serial3 = &serial3; + serial4 = &serial4; + serial5 = &serial5; + }; + + memory { + device_type = "memory"; + }; + + soc: soc@ffe00000 { + ranges = <0x0 0 0xffe00000 0x100000>; + + i2c@3000 { + hwmon@4c { + compatible = "adi,adt7461"; + reg = <0x4c>; + }; + + rtc@68 { + compatible = "dallas,ds1337"; + reg = <0x68>; + interrupts = <8 1 0 0>; + }; + + eeprom@54 { + compatible = "atmel,24c64"; + reg = <0x54>; + }; + + eeprom@52 { + compatible = "atmel,24c512"; + reg = <0x52>; + }; + + eeprom@53 { + compatible = "atmel,24c512"; + reg = <0x53>; + }; + + eeprom@50 { + compatible = "atmel,24c02"; + reg = <0x50>; + }; + + }; + + spi0: spi@7000 { + fsl,espi-num-chipselects = <2>; + + flash@0 { + compatible = "atmel,at25df641"; + reg = <0>; + spi-max-frequency = <10000000>; + }; + flash@1 { + compatible = "atmel,at25df641"; + reg = <1>; + spi-max-frequency = <10000000>; + }; + }; + + usb@22000 { + dr_mode = "host"; + phy_type = "ulpi"; + }; + + enet0: ethernet@24000 { + tbi-handle = <&tbi0>; + phy-handle = <&phy1>; + phy-connection-type = "rgmii-id"; + }; + + mdio@24520 { + phy1: ethernet-phy@1 { + compatible = "brcm,bcm54616S"; + interrupts = <6 1 0 0>; + reg = <0x1>; + }; + + phy2: ethernet-phy@2 { + compatible = "brcm,bcm54616S"; + interrupts = <6 1 0 0>; + reg = <0x2>; + }; + + phy3: ethernet-phy@3 { + compatible = "brcm,bcm54616S"; + interrupts = <5 1 0 0>; + reg = <0x3>; + }; + + phy7: ethernet-phy@7 { + compatible = "brcm,bcm54616S"; + interrupts = <7 1 0 0>; + reg = <0x7>; + }; + + tbi0: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + + enet1: ethernet@25000 { + tbi-handle = <&tbi1>; + phy-handle = <&phy7>; + phy-connection-type = "rgmii-id"; + }; + + mdio@25520 { + tbi1: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + + enet2: ethernet@26000 { + tbi-handle = <&tbi2>; + phy-handle = <&phy3>; + phy-connection-type = "rgmii-id"; + }; + + mdio@26520 { + tbi2: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + }; + + lbc: localbus@ffe05000 { + reg = <0 0xffe05000 0 0x1000>; + + ranges = <0x0 0x0 0x0 0xfff00000 0x00080000 + 0x1 0x0 0x0 0xffc40000 0x00010000 + 0x2 0x0 0x0 0xffc50000 0x00010000 + 0x3 0x0 0x0 0xffc60000 0x00010000 + 0x4 0x0 0x0 0xffc70000 0x00010000 + 0x6 0x0 0x0 0xffc80000 0x00010000 + 0x5 0x0 0x0 0xffdf0000 0x00008000>; + + serial2: serial@1,0 { + device_type = "serial"; + compatible = "ns16550"; + reg = <0x1 0x0 0x100>; + clock-frequency = <1843200>; + interrupts = <11 2 0 0>; + }; + + serial3: serial@2,0 { + device_type = "serial"; + compatible = "ns16550"; + reg = <0x2 0x0 0x100>; + clock-frequency = <1843200>; + interrupts = <1 2 0 0>; + }; + + serial4: serial@3,0 { + device_type = "serial"; + compatible = "ns16550"; + reg = <0x3 0x0 0x100>; + clock-frequency = <1843200>; + interrupts = <2 2 0 0>; + }; + + serial5: serial@4,0 { + device_type = "serial"; + compatible = "ns16550"; + reg = <0x4 0x0 0x100>; + clock-frequency = <1843200>; + interrupts = <3 2 0 0>; + }; + + mram@0,0 { + compatible = "everspin,mram", "mtd-ram"; + reg = <0x0 0x0 0x80000>; + bank-width = <2>; + }; + + board-control@5,0 { + compatible = "artesyn,mvme2500-fpga"; + reg = <0x5 0x0 0x01000>; + }; + + cpld@6,0 { + compatible = "artesyn,mvme2500-cpld"; + reg = <0x6 0x0 0x10000>; + interrupts = <9 1 0 0>; + }; + }; + + pci0: pcie@ffe08000 { + reg = <0 0xffe08000 0 0x1000>; + ranges = <0x2000000 0x0 0x80000000 0 0x80000000 0x0 0x20000000 + 0x1000000 0x0 0x00000000 0 0xffc00000 0x0 0x10000>; + pcie@0 { + ranges = <0x2000000 0x0 0x80000000 + 0x2000000 0x0 0x80000000 + 0x0 0x20000000 + + 0x1000000 0x0 0x0 + 0x1000000 0x0 0x0 + 0x0 0x10000>; + }; + }; + + pci1: pcie@ffe09000 { + reg = <0 0xffe09000 0 0x1000>; + ranges = <0x2000000 0x0 0xa0000000 0 0xa0000000 0x0 0x20000000 + 0x1000000 0x0 0x00000000 0 0xffc10000 0x0 0x10000>; + pcie@0 { + ranges = <0x2000000 0x0 0xa0000000 + 0x2000000 0x0 0xa0000000 + 0x0 0x20000000 + + 0x1000000 0x0 0x0 + 0x1000000 0x0 0x0 + 0x0 0x10000>; + }; + + }; + + pci2: pcie@ffe0a000 { + reg = <0 0xffe0a000 0 0x1000>; + ranges = <0x2000000 0x0 0xc0000000 0 0xc0000000 0x0 0x20000000 + 0x1000000 0x0 0x00000000 0 0xffc20000 0x0 0x10000>; + pcie@0 { + ranges = <0x2000000 0x0 0xc0000000 + 0x2000000 0x0 0xc0000000 + 0x0 0x20000000 + + 0x1000000 0x0 0x0 + 0x1000000 0x0 0x0 + 0x0 0x10000>; + }; + }; +}; + +/include/ "fsl/p2020si-post.dtsi" + +/ { + soc@ffe00000 { + serial@4600 { + status = "disabled"; + }; + + i2c@3100 { + status = "disabled"; + }; + + sdhc@2e000 { + compatible = "fsl,p2020-esdhc", "fsl,esdhc"; + non-removable; + }; + + }; + +}; diff --git a/arch/powerpc/boot/dts/mvme5100.dts b/arch/powerpc/boot/dts/mvme5100.dts new file mode 100644 index 000000000..1ecb341a2 --- /dev/null +++ b/arch/powerpc/boot/dts/mvme5100.dts @@ -0,0 +1,185 @@ +/* + * Device Tree Source for Motorola/Emerson MVME5100. + * + * Copyright 2013 CSC Australia Pty. Ltd. + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without + * any warranty of any kind, whether express or implied. + */ + +/dts-v1/; + +/ { + model = "MVME5100"; + compatible = "MVME5100"; + #address-cells = <1>; + #size-cells = <1>; + + aliases { + serial0 = &serial0; + pci0 = &pci0; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + PowerPC,7410 { + device_type = "cpu"; + reg = <0x0>; + /* Following required by dtc but not used */ + d-cache-line-size = <32>; + i-cache-line-size = <32>; + i-cache-size = <32768>; + d-cache-size = <32768>; + timebase-frequency = <25000000>; + clock-frequency = <500000000>; + bus-frequency = <100000000>; + }; + }; + + memory { + device_type = "memory"; + reg = <0x0 0x20000000>; + }; + + hawk@fef80000 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "hawk-bridge", "simple-bus"; + ranges = <0x0 0xfef80000 0x10000>; + reg = <0xfef80000 0x10000>; + + serial0: serial@8000 { + device_type = "serial"; + compatible = "ns16550"; + reg = <0x8000 0x80>; + reg-shift = <4>; + clock-frequency = <1843200>; + current-speed = <9600>; + interrupts = <1 1>; // IRQ1 Level Active Low. + interrupt-parent = <&mpic>; + }; + + serial1: serial@8200 { + device_type = "serial"; + compatible = "ns16550"; + reg = <0x8200 0x80>; + reg-shift = <4>; + clock-frequency = <1843200>; + current-speed = <9600>; + interrupts = <1 1>; // IRQ1 Level Active Low. + interrupt-parent = <&mpic>; + }; + + mpic: interrupt-controller@f3f80000 { + #interrupt-cells = <2>; + #address-cells = <0>; + device_type = "open-pic"; + compatible = "chrp,open-pic"; + interrupt-controller; + reg = <0xf3f80000 0x40000>; + }; + }; + + pci0: pci@feff0000 { + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + device_type = "pci"; + compatible = "hawk-pci"; + reg = <0xfec00000 0x400000>; + 8259-interrupt-acknowledge = <0xfeff0030>; + ranges = <0x1000000 0x0 0x0 0xfe000000 0x0 0x800000 + 0x2000000 0x0 0x80000000 0x80000000 0x0 0x74000000>; + bus-range = <0 255>; + clock-frequency = <33333333>; + interrupt-parent = <&mpic>; + interrupt-map-mask = <0xf800 0x0 0x0 0x7>; + interrupt-map = < + + /* + * This definition (IDSEL 11) duplicates the + * interrupts definition in the i8259 + * interrupt controller below. + * + * Do not change the interrupt sense/polarity from + * 0x2 to anything else, doing so will cause endless + * "spurious" i8259 interrupts to be fielded. + */ + // IDSEL 11 - iPMC712 PCI/ISA Bridge + 0x5800 0x0 0x0 0x1 &mpic 0x0 0x2 + 0x5800 0x0 0x0 0x2 &mpic 0x0 0x2 + 0x5800 0x0 0x0 0x3 &mpic 0x0 0x2 + 0x5800 0x0 0x0 0x4 &mpic 0x0 0x2 + + /* IDSEL 12 - Not Used */ + + /* IDSEL 13 - Universe VME Bridge */ + 0x6800 0x0 0x0 0x1 &mpic 0x5 0x1 + 0x6800 0x0 0x0 0x2 &mpic 0x6 0x1 + 0x6800 0x0 0x0 0x3 &mpic 0x7 0x1 + 0x6800 0x0 0x0 0x4 &mpic 0x8 0x1 + + /* IDSEL 14 - ENET 1 */ + 0x7000 0x0 0x0 0x1 &mpic 0x2 0x1 + + /* IDSEL 15 - Not Used */ + + /* IDSEL 16 - PMC Slot 1 */ + 0x8000 0x0 0x0 0x1 &mpic 0x9 0x1 + 0x8000 0x0 0x0 0x2 &mpic 0xa 0x1 + 0x8000 0x0 0x0 0x3 &mpic 0xb 0x1 + 0x8000 0x0 0x0 0x4 &mpic 0xc 0x1 + + /* IDSEL 17 - PMC Slot 2 */ + 0x8800 0x0 0x0 0x1 &mpic 0xc 0x1 + 0x8800 0x0 0x0 0x2 &mpic 0x9 0x1 + 0x8800 0x0 0x0 0x3 &mpic 0xa 0x1 + 0x8800 0x0 0x0 0x4 &mpic 0xb 0x1 + + /* IDSEL 18 - Not Used */ + + /* IDSEL 19 - ENET 2 */ + 0x9800 0x0 0x0 0x1 &mpic 0xd 0x1 + + /* IDSEL 20 - PMCSPAN (PCI-X) */ + 0xa000 0x0 0x0 0x1 &mpic 0x9 0x1 + 0xa000 0x0 0x0 0x2 &mpic 0xa 0x1 + 0xa000 0x0 0x0 0x3 &mpic 0xb 0x1 + 0xa000 0x0 0x0 0x4 &mpic 0xc 0x1 + + >; + + isa { + #address-cells = <2>; + #size-cells = <1>; + #interrupt-cells = <2>; + device_type = "isa"; + compatible = "isa"; + ranges = <0x00000001 0 0x01000000 0 0x00000000 0x00001000>; + interrupt-parent = <&i8259>; + + i8259: interrupt-controller@20 { + #interrupt-cells = <2>; + #address-cells = <0>; + interrupts = <0 2>; + device_type = "interrupt-controller"; + compatible = "chrp,iic"; + interrupt-controller; + reg = <1 0x00000020 0x00000002 + 1 0x000000a0 0x00000002 + 1 0x000004d0 0x00000002>; + interrupt-parent = <&mpic>; + }; + + }; + + }; + + chosen { + linux,stdout-path = &serial0; + }; + +}; diff --git a/arch/powerpc/boot/dts/o2d.dts b/arch/powerpc/boot/dts/o2d.dts new file mode 100644 index 000000000..9f6dd4d88 --- /dev/null +++ b/arch/powerpc/boot/dts/o2d.dts @@ -0,0 +1,47 @@ +/* + * O2D Device Tree Source + * + * Copyright (C) 2012 DENX Software Engineering + * Anatolij Gustschin <agust@denx.de> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +/include/ "o2d.dtsi" + +/ { + model = "ifm,o2d"; + compatible = "ifm,o2d"; + + memory { + reg = <0x00000000 0x08000000>; // 128MB + }; + + localbus { + ranges = <0 0 0xfc000000 0x02000000 + 3 0 0xe3000000 0x00100000>; + + flash@0,0 { + compatible = "cfi-flash"; + reg = <0 0 0x02000000>; + bank-width = <2>; + device-width = <2>; + #size-cells = <1>; + #address-cells = <1>; + + partition@60000 { + label = "kernel"; + reg = <0x00060000 0x00260000>; + read-only; + }; + /* o2d specific partitions */ + partition@2c0000 { + label = "o2d user defined"; + reg = <0x002c0000 0x01d40000>; + }; + }; + }; +}; diff --git a/arch/powerpc/boot/dts/o2d.dtsi b/arch/powerpc/boot/dts/o2d.dtsi new file mode 100644 index 000000000..cf073e693 --- /dev/null +++ b/arch/powerpc/boot/dts/o2d.dtsi @@ -0,0 +1,122 @@ +/* + * O2D base Device Tree Source + * + * Copyright (C) 2012 DENX Software Engineering + * Anatolij Gustschin <agust@denx.de> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +/include/ "mpc5200b.dtsi" + +&gpt0 { + gpio-controller; + fsl,has-wdt; + fsl,wdt-on-boot = <0>; +}; +&gpt1 { gpio-controller; }; + +/ { + model = "ifm,o2d"; + compatible = "ifm,o2d"; + + memory { + reg = <0x00000000 0x04000000>; // 64MB + }; + + soc5200@f0000000 { + + rtc@800 { + status = "disabled"; + }; + + psc@2000 { // PSC1 + compatible = "fsl,mpc5200b-psc-spi","fsl,mpc5200-psc-spi"; + #address-cells = <1>; + #size-cells = <0>; + cell-index = <0>; + + spidev@0 { + compatible = "spidev"; + spi-max-frequency = <250000>; + reg = <0>; + }; + }; + + psc@2200 { // PSC2 + status = "disabled"; + }; + + psc@2400 { // PSC3 + status = "disabled"; + }; + + psc@2600 { // PSC4 + compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart"; + }; + + psc@2800 { // PSC5 + compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart"; + }; + + psc@2c00 { // PSC6 + status = "disabled"; + }; + + ethernet@3000 { + phy-handle = <&phy0>; + }; + + mdio@3000 { + phy0: ethernet-phy@0 { + reg = <0>; + }; + }; + }; + + localbus { + ranges = <0 0 0xff000000 0x01000000 + 3 0 0xe3000000 0x00100000>; + + // flash device at LocalPlus Bus CS0 + flash@0,0 { + compatible = "cfi-flash"; + reg = <0 0 0x01000000>; + bank-width = <1>; + device-width = <2>; + #size-cells = <1>; + #address-cells = <1>; + no-unaligned-direct-access; + + /* common layout for all machines */ + partition@0 { + label = "u-boot"; + reg = <0x00000000 0x00040000>; + read-only; + }; + partition@40000 { + label = "env"; + reg = <0x00040000 0x00020000>; + read-only; + }; + }; + + csi@3,0 { + compatible = "ifm,o2d-csi"; + reg = <3 0 0x00100000>; + ifm,csi-clk-handle = <&gpt7>; + gpios = <&gpio_simple 23 0 /* imag_capture */ + &gpio_simple 26 0 /* imag_reset */ + &gpio_simple 29 0>; /* imag_master_en */ + + interrupts = <1 1 2>; /* IRQ1, edge falling */ + + ifm,csi-addr-bus-width = <24>; + ifm,csi-data-bus-width = <8>; + ifm,csi-wait-cycles = <0>; + }; + }; +}; diff --git a/arch/powerpc/boot/dts/o2d300.dts b/arch/powerpc/boot/dts/o2d300.dts new file mode 100644 index 000000000..29affe0f0 --- /dev/null +++ b/arch/powerpc/boot/dts/o2d300.dts @@ -0,0 +1,52 @@ +/* + * O2D300 Device Tree Source + * + * Copyright (C) 2012 DENX Software Engineering + * Anatolij Gustschin <agust@denx.de> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +/include/ "o2d.dtsi" + +/ { + model = "ifm,o2d300"; + compatible = "ifm,o2d"; + + localbus { + ranges = <0 0 0xfc000000 0x02000000 + 3 0 0xe3000000 0x00100000>; + flash@0,0 { + compatible = "cfi-flash"; + reg = <0 0 0x02000000>; + bank-width = <2>; + device-width = <2>; + #size-cells = <1>; + #address-cells = <1>; + + partition@40000 { + label = "env_1"; + reg = <0x00040000 0x00020000>; + read-only; + }; + partition@60000 { + label = "env_2"; + reg = <0x00060000 0x00020000>; + read-only; + }; + partition@80000 { + label = "kernel"; + reg = <0x00080000 0x00260000>; + read-only; + }; + /* o2d300 specific partitions */ + partition@2e0000 { + label = "o2d300 user defined"; + reg = <0x002e0000 0x01d20000>; + }; + }; + }; +}; diff --git a/arch/powerpc/boot/dts/o2dnt2.dts b/arch/powerpc/boot/dts/o2dnt2.dts new file mode 100644 index 000000000..a0f5b97a4 --- /dev/null +++ b/arch/powerpc/boot/dts/o2dnt2.dts @@ -0,0 +1,48 @@ +/* + * O2DNT2 Device Tree Source + * + * Copyright (C) 2012 DENX Software Engineering + * Anatolij Gustschin <agust@denx.de> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +/include/ "o2d.dtsi" + +/ { + model = "ifm,o2dnt2"; + compatible = "ifm,o2d"; + + memory { + reg = <0x00000000 0x08000000>; // 128MB + }; + + localbus { + ranges = <0 0 0xfc000000 0x02000000 + 3 0 0xe3000000 0x00100000>; + + flash@0,0 { + compatible = "cfi-flash"; + reg = <0 0 0x02000000>; + bank-width = <2>; + device-width = <2>; + #size-cells = <1>; + #address-cells = <1>; + + partition@60000 { + label = "kernel"; + reg = <0x00060000 0x00260000>; + read-only; + }; + + /* o2dnt2 specific partitions */ + partition@2c0000 { + label = "o2dnt2 user defined"; + reg = <0x002c0000 0x01d40000>; + }; + }; + }; +}; diff --git a/arch/powerpc/boot/dts/o2i.dts b/arch/powerpc/boot/dts/o2i.dts new file mode 100644 index 000000000..e3cc99d13 --- /dev/null +++ b/arch/powerpc/boot/dts/o2i.dts @@ -0,0 +1,33 @@ +/* + * O2I Device Tree Source + * + * Copyright (C) 2012 DENX Software Engineering + * Anatolij Gustschin <agust@denx.de> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +/include/ "o2d.dtsi" + +/ { + model = "ifm,o2i"; + compatible = "ifm,o2d"; + + localbus { + flash@0,0 { + partition@60000 { + label = "kernel"; + reg = <0x00060000 0x00260000>; + read-only; + }; + /* o2i specific partitions */ + partition@2c0000 { + label = "o2i user defined"; + reg = <0x002c0000 0x00d40000>; + }; + }; + }; +}; diff --git a/arch/powerpc/boot/dts/o2mnt.dts b/arch/powerpc/boot/dts/o2mnt.dts new file mode 100644 index 000000000..d91859a9e --- /dev/null +++ b/arch/powerpc/boot/dts/o2mnt.dts @@ -0,0 +1,33 @@ +/* + * O2MNT Device Tree Source + * + * Copyright (C) 2012 DENX Software Engineering + * Anatolij Gustschin <agust@denx.de> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +/include/ "o2d.dtsi" + +/ { + model = "ifm,o2mnt"; + compatible = "ifm,o2d"; + + localbus { + flash@0,0 { + partition@60000 { + label = "kernel"; + reg = <0x00060000 0x00260000>; + read-only; + }; + /* add o2mnt specific partitions */ + partition@2c0000 { + label = "o2mnt user defined"; + reg = <0x002c0000 0x00d40000>; + }; + }; + }; +}; diff --git a/arch/powerpc/boot/dts/o3dnt.dts b/arch/powerpc/boot/dts/o3dnt.dts new file mode 100644 index 000000000..acce49326 --- /dev/null +++ b/arch/powerpc/boot/dts/o3dnt.dts @@ -0,0 +1,48 @@ +/* + * O3DNT Device Tree Source + * + * Copyright (C) 2012 DENX Software Engineering + * Anatolij Gustschin <agust@denx.de> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +/include/ "o2d.dtsi" + +/ { + model = "ifm,o3dnt"; + compatible = "ifm,o2d"; + + memory { + reg = <0x00000000 0x04000000>; // 64MB + }; + + localbus { + ranges = <0 0 0xfc000000 0x01000000 + 3 0 0xe3000000 0x00100000>; + + flash@0,0 { + compatible = "cfi-flash"; + reg = <0 0 0x01000000>; + bank-width = <2>; + device-width = <2>; + #size-cells = <1>; + #address-cells = <1>; + + partition@60000 { + label = "kernel"; + reg = <0x00060000 0x00260000>; + read-only; + }; + + /* o3dnt specific partitions */ + partition@2c0000 { + label = "o3dnt user defined"; + reg = <0x002c0000 0x00d40000>; + }; + }; + }; +}; diff --git a/arch/powerpc/boot/dts/obs600.dts b/arch/powerpc/boot/dts/obs600.dts new file mode 100644 index 000000000..18e7d79ee --- /dev/null +++ b/arch/powerpc/boot/dts/obs600.dts @@ -0,0 +1,314 @@ +/* + * Device Tree Source for PlatHome OpenBlockS 600 (405EX) + * + * Copyright 2011 Ben Herrenschmidt, IBM Corp. + * + * Based on Kilauea by: + * + * Copyright 2007-2009 DENX Software Engineering, Stefan Roese <sr@denx.de> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without + * any warranty of any kind, whether express or implied. + */ + +/dts-v1/; + +/ { + #address-cells = <1>; + #size-cells = <1>; + model = "PlatHome,OpenBlockS 600"; + compatible = "plathome,obs600"; + dcr-parent = <&{/cpus/cpu@0}>; + + aliases { + ethernet0 = &EMAC0; + ethernet1 = &EMAC1; + serial0 = &UART0; + serial1 = &UART1; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu@0 { + device_type = "cpu"; + model = "PowerPC,405EX"; + reg = <0x00000000>; + clock-frequency = <0>; /* Filled in by U-Boot */ + timebase-frequency = <0>; /* Filled in by U-Boot */ + i-cache-line-size = <32>; + d-cache-line-size = <32>; + i-cache-size = <16384>; /* 16 kB */ + d-cache-size = <16384>; /* 16 kB */ + dcr-controller; + dcr-access-method = "native"; + }; + }; + + memory { + device_type = "memory"; + reg = <0x00000000 0x00000000>; /* Filled in by U-Boot */ + }; + + UIC0: interrupt-controller { + compatible = "ibm,uic-405ex", "ibm,uic"; + interrupt-controller; + cell-index = <0>; + dcr-reg = <0x0c0 0x009>; + #address-cells = <0>; + #size-cells = <0>; + #interrupt-cells = <2>; + }; + + UIC1: interrupt-controller1 { + compatible = "ibm,uic-405ex","ibm,uic"; + interrupt-controller; + cell-index = <1>; + dcr-reg = <0x0d0 0x009>; + #address-cells = <0>; + #size-cells = <0>; + #interrupt-cells = <2>; + interrupts = <0x1e 0x4 0x1f 0x4>; /* cascade */ + interrupt-parent = <&UIC0>; + }; + + UIC2: interrupt-controller2 { + compatible = "ibm,uic-405ex","ibm,uic"; + interrupt-controller; + cell-index = <2>; + dcr-reg = <0x0e0 0x009>; + #address-cells = <0>; + #size-cells = <0>; + #interrupt-cells = <2>; + interrupts = <0x1c 0x4 0x1d 0x4>; /* cascade */ + interrupt-parent = <&UIC0>; + }; + + CPM0: cpm { + compatible = "ibm,cpm"; + dcr-access-method = "native"; + dcr-reg = <0x0b0 0x003>; + unused-units = <0x00000000>; + idle-doze = <0x02000000>; + standby = <0xe3e74800>; + }; + + plb { + compatible = "ibm,plb-405ex", "ibm,plb4"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + clock-frequency = <0>; /* Filled in by U-Boot */ + + SDRAM0: memory-controller { + compatible = "ibm,sdram-405ex", "ibm,sdram-4xx-ddr2"; + dcr-reg = <0x010 0x002>; + interrupt-parent = <&UIC2>; + interrupts = <0x5 0x4 /* ECC DED Error */ + 0x6 0x4>; /* ECC SEC Error */ + }; + + CRYPTO: crypto@ef700000 { + compatible = "amcc,ppc405ex-crypto", "amcc,ppc4xx-crypto"; + reg = <0xef700000 0x80400>; + interrupt-parent = <&UIC0>; + interrupts = <0x17 0x2>; + }; + + MAL0: mcmal { + compatible = "ibm,mcmal-405ex", "ibm,mcmal2"; + dcr-reg = <0x180 0x062>; + num-tx-chans = <2>; + num-rx-chans = <2>; + interrupt-parent = <&MAL0>; + interrupts = <0x0 0x1 0x2 0x3 0x4>; + #interrupt-cells = <1>; + #address-cells = <0>; + #size-cells = <0>; + interrupt-map = </*TXEOB*/ 0x0 &UIC0 0xa 0x4 + /*RXEOB*/ 0x1 &UIC0 0xb 0x4 + /*SERR*/ 0x2 &UIC1 0x0 0x4 + /*TXDE*/ 0x3 &UIC1 0x1 0x4 + /*RXDE*/ 0x4 &UIC1 0x2 0x4>; + interrupt-map-mask = <0xffffffff>; + }; + + POB0: opb { + compatible = "ibm,opb-405ex", "ibm,opb"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x80000000 0x80000000 0x10000000 + 0xef600000 0xef600000 0x00a00000 + 0xf0000000 0xf0000000 0x10000000>; + dcr-reg = <0x0a0 0x005>; + clock-frequency = <0>; /* Filled in by U-Boot */ + + EBC0: ebc { + compatible = "ibm,ebc-405ex", "ibm,ebc"; + dcr-reg = <0x012 0x002>; + #address-cells = <2>; + #size-cells = <1>; + clock-frequency = <0>; /* Filled in by U-Boot */ + /* ranges property is supplied by U-Boot */ + interrupts = <0x5 0x1>; + interrupt-parent = <&UIC1>; + + nor_flash@0,0 { + compatible = "amd,s29gl512n", "cfi-flash"; + bank-width = <2>; + reg = <0x00000000 0x00000000 0x08000000>; + #address-cells = <1>; + #size-cells = <1>; + partition@0 { + label = "kernel + initrd"; + reg = <0x00000000 0x03de0000>; + }; + partition@3de0000 { + label = "user config area"; + reg = <0x03de0000 0x00080000>; + }; + partition@3e60000 { + label = "user program area"; + reg = <0x03e60000 0x04000000>; + }; + partition@7e60000 { + label = "flat device tree"; + reg = <0x07e60000 0x00080000>; + }; + partition@7ee0000 { + label = "test program"; + reg = <0x07ee0000 0x00080000>; + }; + partition@7f60000 { + label = "u-boot env"; + reg = <0x07f60000 0x00040000>; + }; + partition@7fa0000 { + label = "u-boot"; + reg = <0x07fa0000 0x00060000>; + }; + }; + }; + + UART0: serial@ef600200 { + device_type = "serial"; + compatible = "ns16550"; + reg = <0xef600200 0x00000008>; + virtual-reg = <0xef600200>; + clock-frequency = <0>; /* Filled in by U-Boot */ + current-speed = <0>; + interrupt-parent = <&UIC0>; + interrupts = <0x1a 0x4>; + }; + + UART1: serial@ef600300 { + device_type = "serial"; + compatible = "ns16550"; + reg = <0xef600300 0x00000008>; + virtual-reg = <0xef600300>; + clock-frequency = <0>; /* Filled in by U-Boot */ + current-speed = <0>; + interrupt-parent = <&UIC0>; + interrupts = <0x1 0x4>; + }; + + IIC0: i2c@ef600400 { + compatible = "ibm,iic-405ex", "ibm,iic"; + reg = <0xef600400 0x00000014>; + interrupt-parent = <&UIC0>; + interrupts = <0x2 0x4>; + #address-cells = <1>; + #size-cells = <0>; + + rtc@68 { + compatible = "dallas,ds1340"; + reg = <0x68>; + }; + }; + + IIC1: i2c@ef600500 { + compatible = "ibm,iic-405ex", "ibm,iic"; + reg = <0xef600500 0x00000014>; + interrupt-parent = <&UIC0>; + interrupts = <0x7 0x4>; + }; + + RGMII0: emac-rgmii@ef600b00 { + compatible = "ibm,rgmii-405ex", "ibm,rgmii"; + reg = <0xef600b00 0x00000104>; + has-mdio; + }; + + EMAC0: ethernet@ef600900 { + linux,network-index = <0x0>; + device_type = "network"; + compatible = "ibm,emac-405ex", "ibm,emac4sync"; + interrupt-parent = <&EMAC0>; + interrupts = <0x0 0x1>; + #interrupt-cells = <1>; + #address-cells = <0>; + #size-cells = <0>; + interrupt-map = </*Status*/ 0x0 &UIC0 0x18 0x4 + /*Wake*/ 0x1 &UIC1 0x1d 0x4>; + reg = <0xef600900 0x000000c4>; + local-mac-address = [000000000000]; /* Filled in by U-Boot */ + mal-device = <&MAL0>; + mal-tx-channel = <0>; + mal-rx-channel = <0>; + cell-index = <0>; + max-frame-size = <9000>; + rx-fifo-size = <4096>; + tx-fifo-size = <2048>; + rx-fifo-size-gige = <16384>; + tx-fifo-size-gige = <16384>; + phy-mode = "rgmii"; + phy-map = <0x00000000>; + rgmii-device = <&RGMII0>; + rgmii-channel = <0>; + has-inverted-stacr-oc; + has-new-stacr-staopc; + }; + + EMAC1: ethernet@ef600a00 { + linux,network-index = <0x1>; + device_type = "network"; + compatible = "ibm,emac-405ex", "ibm,emac4sync"; + interrupt-parent = <&EMAC1>; + interrupts = <0x0 0x1>; + #interrupt-cells = <1>; + #address-cells = <0>; + #size-cells = <0>; + interrupt-map = </*Status*/ 0x0 &UIC0 0x19 0x4 + /*Wake*/ 0x1 &UIC1 0x1f 0x4>; + reg = <0xef600a00 0x000000c4>; + local-mac-address = [000000000000]; /* Filled in by U-Boot */ + mal-device = <&MAL0>; + mal-tx-channel = <1>; + mal-rx-channel = <1>; + cell-index = <1>; + max-frame-size = <9000>; + rx-fifo-size = <4096>; + tx-fifo-size = <2048>; + rx-fifo-size-gige = <16384>; + tx-fifo-size-gige = <16384>; + phy-mode = "rgmii"; + phy-map = <0x00000000>; + rgmii-device = <&RGMII0>; + rgmii-channel = <1>; + has-inverted-stacr-oc; + has-new-stacr-staopc; + }; + + GPIO: gpio@ef600800 { + device_type = "gpio"; + compatible = "ibm,gpio-405ex", "ibm,ppc4xx-gpio"; + reg = <0xef600800 0x50>; + }; + }; + }; + chosen { + linux,stdout-path = "/plb/opb/serial@ef600200"; + }; +}; diff --git a/arch/powerpc/boot/dts/oca4080.dts b/arch/powerpc/boot/dts/oca4080.dts new file mode 100644 index 000000000..eb76caae1 --- /dev/null +++ b/arch/powerpc/boot/dts/oca4080.dts @@ -0,0 +1,133 @@ +/* + * OCA4080 Device Tree Source + * + * Copyright 2014 Prodrive Technologies B.V. + * + * Based on: + * P4080DS Device Tree Source + * Copyright 2009-2011 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +/include/ "fsl/p4080si-pre.dtsi" + +/ { + model = "fsl,OCA4080"; + compatible = "fsl,OCA4080"; + #address-cells = <2>; + #size-cells = <2>; + interrupt-parent = <&mpic>; + + memory { + device_type = "memory"; + }; + + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + bman_fbpr: bman-fbpr { + size = <0 0x1000000>; + alignment = <0 0x1000000>; + }; + }; + + dcsr: dcsr@f00000000 { + ranges = <0x00000000 0xf 0x00000000 0x01008000>; + }; + + bportals: bman-portals@ff4000000 { + ranges = <0x0 0xf 0xf4000000 0x200000>; + }; + + soc: soc@ffe000000 { + ranges = <0x00000000 0xf 0xfe000000 0x1000000>; + reg = <0xf 0xfe000000 0 0x00001000>; + + i2c@118000 { + status = "disabled"; + }; + + i2c@118100 { + status = "disabled"; + }; + + i2c@119000 { + status = "disabled"; + }; + + i2c@119100 { + status = "disabled"; + }; + + usb0: usb@210000 { + status = "disabled"; + }; + + usb1: usb@211000 { + status = "disabled"; + }; + }; + + rio: rapidio@ffe0c0000 { + reg = <0xf 0xfe0c0000 0 0x11000>; + + port1 { + ranges = <0 0 0xc 0x20000000 0 0x10000000>; + }; + }; + + lbc: localbus@ffe124000 { + reg = <0xf 0xfe124000 0 0x1000>; + ranges = <0 0 0xf 0xef800000 0x800000>; + + flash@0,0 { + compatible = "cfi-flash"; + reg = <0 0 0x00800000>; + bank-width = <2>; + device-width = <2>; + }; + }; + + pci0: pcie@ffe200000 { + status = "disabled"; + }; + + pci1: pcie@ffe201000 { + status = "disabled"; + }; + + pci2: pcie@ffe202000 { + status = "disabled"; + }; +}; + +/include/ "fsl/p4080si-post.dtsi" diff --git a/arch/powerpc/boot/dts/p1010rdb-pa.dts b/arch/powerpc/boot/dts/p1010rdb-pa.dts new file mode 100644 index 000000000..767d4c032 --- /dev/null +++ b/arch/powerpc/boot/dts/p1010rdb-pa.dts @@ -0,0 +1,23 @@ +/* + * P1010 RDB Device Tree Source + * + * Copyright 2011 Freescale Semiconductor Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +/include/ "fsl/p1010si-pre.dtsi" + +/ { + model = "fsl,P1010RDB"; + compatible = "fsl,P1010RDB"; + + /include/ "p1010rdb_32b.dtsi" +}; + +/include/ "p1010rdb.dtsi" +/include/ "p1010rdb-pa.dtsi" +/include/ "fsl/p1010si-post.dtsi" diff --git a/arch/powerpc/boot/dts/p1010rdb-pa.dtsi b/arch/powerpc/boot/dts/p1010rdb-pa.dtsi new file mode 100644 index 000000000..434fb2d58 --- /dev/null +++ b/arch/powerpc/boot/dts/p1010rdb-pa.dtsi @@ -0,0 +1,85 @@ +/* + * P1010 RDB Device Tree Source stub (no addresses or top-level ranges) + * + * Copyright 2013 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +&ifc_nand { + partition@0 { + /* This location must not be altered */ + /* 1MB for u-boot Bootloader Image */ + reg = <0x0 0x00100000>; + label = "NAND U-Boot Image"; + read-only; + }; + + partition@100000 { + /* 1MB for DTB Image */ + reg = <0x00100000 0x00100000>; + label = "NAND DTB Image"; + }; + + partition@200000 { + /* 4MB for Linux Kernel Image */ + reg = <0x00200000 0x00400000>; + label = "NAND Linux Kernel Image"; + }; + + partition@600000 { + /* 4MB for Compressed Root file System Image */ + reg = <0x00600000 0x00400000>; + label = "NAND Compressed RFS Image"; + }; + + partition@a00000 { + /* 15MB for JFFS2 based Root file System */ + reg = <0x00a00000 0x00f00000>; + label = "NAND JFFS2 Root File System"; + }; + + partition@1900000 { + /* 7MB for User Area */ + reg = <0x01900000 0x00700000>; + label = "NAND User area"; + }; +}; + +&phy0 { + interrupts = <1 1 0 0>; +}; + +&phy1 { + interrupts = <2 1 0 0>; +}; + +&phy2 { + interrupts = <4 1 0 0>; +}; diff --git a/arch/powerpc/boot/dts/p1010rdb-pa_36b.dts b/arch/powerpc/boot/dts/p1010rdb-pa_36b.dts new file mode 100644 index 000000000..3033371bc --- /dev/null +++ b/arch/powerpc/boot/dts/p1010rdb-pa_36b.dts @@ -0,0 +1,46 @@ +/* + * P1010 RDB Device Tree Source (36-bit address map) + * + * Copyright 2011 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +/include/ "fsl/p1010si-pre.dtsi" + +/ { + model = "fsl,P1010RDB"; + compatible = "fsl,P1010RDB"; + + /include/ "p1010rdb_36b.dtsi" +}; + +/include/ "p1010rdb.dtsi" +/include/ "p1010rdb-pa.dtsi" +/include/ "fsl/p1010si-post.dtsi" diff --git a/arch/powerpc/boot/dts/p1010rdb-pb.dts b/arch/powerpc/boot/dts/p1010rdb-pb.dts new file mode 100644 index 000000000..6eeb7d318 --- /dev/null +++ b/arch/powerpc/boot/dts/p1010rdb-pb.dts @@ -0,0 +1,35 @@ +/* + * P1010 RDB Device Tree Source + * + * Copyright 2011 Freescale Semiconductor Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +/include/ "fsl/p1010si-pre.dtsi" + +/ { + model = "fsl,P1010RDB-PB"; + compatible = "fsl,P1010RDB-PB"; + + /include/ "p1010rdb_32b.dtsi" +}; + +/include/ "p1010rdb.dtsi" + +&phy0 { + interrupts = <0 1 0 0>; +}; + +&phy1 { + interrupts = <2 1 0 0>; +}; + +&phy2 { + interrupts = <1 1 0 0>; +}; + +/include/ "fsl/p1010si-post.dtsi" diff --git a/arch/powerpc/boot/dts/p1010rdb-pb_36b.dts b/arch/powerpc/boot/dts/p1010rdb-pb_36b.dts new file mode 100644 index 000000000..7ab3c907b --- /dev/null +++ b/arch/powerpc/boot/dts/p1010rdb-pb_36b.dts @@ -0,0 +1,58 @@ +/* + * P1010 RDB Device Tree Source (36-bit address map) + * + * Copyright 2011 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +/include/ "fsl/p1010si-pre.dtsi" + +/ { + model = "fsl,P1010RDB-PB"; + compatible = "fsl,P1010RDB-PB"; + + /include/ "p1010rdb_36b.dtsi" +}; + +/include/ "p1010rdb.dtsi" + +&phy0 { + interrupts = <0 1 0 0>; +}; + +&phy1 { + interrupts = <2 1 0 0>; +}; + +&phy2 { + interrupts = <1 1 0 0>; +}; + +/include/ "fsl/p1010si-post.dtsi" diff --git a/arch/powerpc/boot/dts/p1010rdb.dtsi b/arch/powerpc/boot/dts/p1010rdb.dtsi new file mode 100644 index 000000000..ea534efa7 --- /dev/null +++ b/arch/powerpc/boot/dts/p1010rdb.dtsi @@ -0,0 +1,205 @@ +/* + * P1010 RDB Device Tree Source stub (no addresses or top-level ranges) + * + * Copyright 2011 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +&board_ifc { + nor@0,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "cfi-flash"; + reg = <0x0 0x0 0x2000000>; + bank-width = <2>; + device-width = <1>; + + partition@40000 { + /* 256KB for DTB Image */ + reg = <0x00040000 0x00040000>; + label = "NOR DTB Image"; + }; + + partition@80000 { + /* 7 MB for Linux Kernel Image */ + reg = <0x00080000 0x00700000>; + label = "NOR Linux Kernel Image"; + }; + + partition@800000 { + /* 20MB for JFFS2 based Root file System */ + reg = <0x00800000 0x01400000>; + label = "NOR JFFS2 Root File System"; + }; + + partition@1f00000 { + /* This location must not be altered */ + /* 512KB for u-boot Bootloader Image */ + /* 512KB for u-boot Environment Variables */ + reg = <0x01f00000 0x00100000>; + label = "NOR U-Boot Image"; + read-only; + }; + }; + + ifc_nand: nand@1,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,ifc-nand"; + reg = <0x1 0x0 0x10000>; + }; + + cpld@3,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,p1010rdb-cpld"; + reg = <0x3 0x0 0x0000020>; + bank-width = <1>; + device-width = <1>; + }; +}; + +&board_soc { + i2c@3000 { + eeprom@50 { + compatible = "st,24c256"; + reg = <0x50>; + }; + + rtc@68 { + compatible = "pericom,pt7c4338"; + reg = <0x68>; + }; + }; + + i2c@3100 { + eeprom@52 { + compatible = "atmel,24c01"; + reg = <0x52>; + }; + }; + + spi@7000 { + flash@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "spansion,s25sl12801"; + reg = <0>; + spi-max-frequency = <40000000>; + + partition@0 { + /* 1MB for u-boot Bootloader Image */ + /* 1MB for Environment */ + reg = <0x0 0x00100000>; + label = "SPI Flash U-Boot Image"; + read-only; + }; + + partition@100000 { + /* 512KB for DTB Image */ + reg = <0x00100000 0x00080000>; + label = "SPI Flash DTB Image"; + }; + + partition@180000 { + /* 4MB for Linux Kernel Image */ + reg = <0x00180000 0x00400000>; + label = "SPI Flash Linux Kernel Image"; + }; + + partition@580000 { + /* 4MB for Compressed RFS Image */ + reg = <0x00580000 0x00400000>; + label = "SPI Flash Compressed RFSImage"; + }; + + partition@980000 { + /* 6.5MB for JFFS2 based RFS */ + reg = <0x00980000 0x00680000>; + label = "SPI Flash JFFS2 RFS"; + }; + }; + }; + + usb@22000 { + phy_type = "utmi"; + dr_mode = "host"; + }; + + mdio@24000 { + phy0: ethernet-phy@0 { + reg = <0x1>; + }; + + phy1: ethernet-phy@1 { + reg = <0x0>; + }; + + phy2: ethernet-phy@2 { + reg = <0x2>; + }; + + tbi-phy@3 { + device_type = "tbi-phy"; + reg = <0x3>; + }; + }; + + mdio@25000 { + tbi0: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + + mdio@26000 { + tbi1: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + + enet0: ethernet@b0000 { + phy-handle = <&phy0>; + phy-connection-type = "rgmii-id"; + }; + + enet1: ethernet@b1000 { + phy-handle = <&phy1>; + tbi-handle = <&tbi0>; + phy-connection-type = "sgmii"; + }; + + enet2: ethernet@b2000 { + phy-handle = <&phy2>; + tbi-handle = <&tbi1>; + phy-connection-type = "sgmii"; + }; +}; diff --git a/arch/powerpc/boot/dts/p1010rdb_32b.dtsi b/arch/powerpc/boot/dts/p1010rdb_32b.dtsi new file mode 100644 index 000000000..fdc19aab2 --- /dev/null +++ b/arch/powerpc/boot/dts/p1010rdb_32b.dtsi @@ -0,0 +1,79 @@ +/* + * P1010 RDB Device Tree Source stub (no addresses or top-level ranges) + * + * Copyright 2013 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +memory { + device_type = "memory"; +}; + +board_ifc: ifc: ifc@ffe1e000 { + /* NOR, NAND Flashes and CPLD on board */ + ranges = <0x0 0x0 0x0 0xee000000 0x02000000 + 0x1 0x0 0x0 0xff800000 0x00010000 + 0x3 0x0 0x0 0xffb00000 0x00000020>; + reg = <0x0 0xffe1e000 0 0x2000>; +}; + +board_soc: soc: soc@ffe00000 { + ranges = <0x0 0x0 0xffe00000 0x100000>; +}; + +pci0: pcie@ffe09000 { + reg = <0 0xffe09000 0 0x1000>; + ranges = <0x2000000 0x0 0xa0000000 0 0xa0000000 0x0 0x20000000 + 0x1000000 0x0 0x00000000 0 0xffc10000 0x0 0x10000>; + pcie@0 { + ranges = <0x2000000 0x0 0xa0000000 + 0x2000000 0x0 0xa0000000 + 0x0 0x20000000 + + 0x1000000 0x0 0x0 + 0x1000000 0x0 0x0 + 0x0 0x100000>; + }; +}; + +pci1: pcie@ffe0a000 { + reg = <0 0xffe0a000 0 0x1000>; + ranges = <0x2000000 0x0 0x80000000 0 0x80000000 0x0 0x20000000 + 0x1000000 0x0 0x00000000 0 0xffc00000 0x0 0x10000>; + pcie@0 { + ranges = <0x2000000 0x0 0x80000000 + 0x2000000 0x0 0x80000000 + 0x0 0x20000000 + + 0x1000000 0x0 0x0 + 0x1000000 0x0 0x0 + 0x0 0x100000>; + }; +}; diff --git a/arch/powerpc/boot/dts/p1010rdb_36b.dtsi b/arch/powerpc/boot/dts/p1010rdb_36b.dtsi new file mode 100644 index 000000000..de2fceed4 --- /dev/null +++ b/arch/powerpc/boot/dts/p1010rdb_36b.dtsi @@ -0,0 +1,79 @@ +/* + * P1010 RDB Device Tree Source stub (no addresses or top-level ranges) + * + * Copyright 2013 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +memory { + device_type = "memory"; +}; + +board_ifc: ifc: ifc@fffe1e000 { + /* NOR, NAND Flashes and CPLD on board */ + ranges = <0x0 0x0 0xf 0xee000000 0x02000000 + 0x1 0x0 0xf 0xff800000 0x00010000 + 0x3 0x0 0xf 0xffb00000 0x00000020>; + reg = <0xf 0xffe1e000 0 0x2000>; +}; + +board_soc: soc: soc@fffe00000 { + ranges = <0x0 0xf 0xffe00000 0x100000>; +}; + +pci0: pcie@fffe09000 { + reg = <0xf 0xffe09000 0 0x1000>; + ranges = <0x2000000 0x0 0xc0000000 0xc 0x20000000 0x0 0x20000000 + 0x1000000 0x0 0x00000000 0xf 0xffc10000 0x0 0x10000>; + pcie@0 { + ranges = <0x2000000 0x0 0xc0000000 + 0x2000000 0x0 0xc0000000 + 0x0 0x20000000 + + 0x1000000 0x0 0x0 + 0x1000000 0x0 0x0 + 0x0 0x100000>; + }; +}; + +pci1: pcie@fffe0a000 { + reg = <0xf 0xffe0a000 0 0x1000>; + ranges = <0x2000000 0x0 0xc0000000 0xc 0x20000000 0x0 0x20000000 + 0x1000000 0x0 0x00000000 0xf 0xffc10000 0x0 0x10000>; + pcie@0 { + ranges = <0x2000000 0x0 0xc0000000 + 0x2000000 0x0 0xc0000000 + 0x0 0x20000000 + + 0x1000000 0x0 0x0 + 0x1000000 0x0 0x0 + 0x0 0x100000>; + }; +}; diff --git a/arch/powerpc/boot/dts/p1020mbg-pc.dtsi b/arch/powerpc/boot/dts/p1020mbg-pc.dtsi new file mode 100644 index 000000000..a24699cfe --- /dev/null +++ b/arch/powerpc/boot/dts/p1020mbg-pc.dtsi @@ -0,0 +1,151 @@ +/* + * P1020 MBG-PC Device Tree Source stub (no addresses or top-level ranges) + * + * Copyright 2012 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +&lbc { + nor@0,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "cfi-flash"; + reg = <0x0 0x0 0x4000000>; + bank-width = <2>; + device-width = <1>; + + partition@0 { + /* 128KB for DTB Image */ + reg = <0x0 0x00020000>; + label = "NOR DTB Image"; + }; + + partition@20000 { + /* 3.875 MB for Linux Kernel Image */ + reg = <0x00020000 0x003e0000>; + label = "NOR Linux Kernel Image"; + }; + + partition@400000 { + /* 58MB for Root file System */ + reg = <0x00400000 0x03a00000>; + label = "NOR Root File System"; + }; + + partition@3e00000 { + /* This location must not be altered */ + /* 1M for Vitesse 7385 Switch firmware */ + reg = <0x3e00000 0x00100000>; + label = "NOR Vitesse-7385 Firmware"; + read-only; + }; + + partition@3f00000 { + /* This location must not be altered */ + /* 512KB for u-boot Bootloader Image */ + /* 512KB for u-boot Environment Variables */ + reg = <0x03f00000 0x00100000>; + label = "NOR U-Boot Image"; + read-only; + }; + }; + + L2switch@2,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "vitesse-7385"; + reg = <0x2 0x0 0x20000>; + }; +}; + +&soc { + i2c@3000 { + rtc@68 { + compatible = "dallas,ds1339"; + reg = <0x68>; + }; + }; + + mdio@24000 { + phy0: ethernet-phy@0 { + interrupts = <3 1 0 0>; + reg = <0x0>; + }; + phy1: ethernet-phy@1 { + interrupts = <2 1 0 0>; + reg = <0x1>; + }; + }; + + mdio@25000 { + tbi1: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + + mdio@26000 { + tbi2: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + + enet0: ethernet@b0000 { + fixed-link = <1 1 1000 0 0>; + phy-connection-type = "rgmii-id"; + }; + + enet1: ethernet@b1000 { + phy-handle = <&phy0>; + tbi-handle = <&tbi1>; + phy-connection-type = "sgmii"; + }; + + enet2: ethernet@b2000 { + phy-handle = <&phy1>; + phy-connection-type = "rgmii-id"; + }; + + usb@22000 { + phy_type = "ulpi"; + }; + + /* USB2 is shared with localbus, so it must be disabled + by default. We can't put 'status = "disabled";' here + since U-Boot doesn't clear the status property when + it enables USB2. OTOH, U-Boot does create a new node + when there isn't any. So, just comment it out. + */ + usb@23000 { + status = "disabled"; + phy_type = "ulpi"; + }; +}; diff --git a/arch/powerpc/boot/dts/p1020mbg-pc_32b.dts b/arch/powerpc/boot/dts/p1020mbg-pc_32b.dts new file mode 100644 index 000000000..ab8f076ea --- /dev/null +++ b/arch/powerpc/boot/dts/p1020mbg-pc_32b.dts @@ -0,0 +1,89 @@ +/* + * P1020 MBG-PC Device Tree Source (32-bit address map) + * + * Copyright 2012 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +/include/ "fsl/p1020si-pre.dtsi" +/ { + model = "fsl,P1020MBG-PC"; + compatible = "fsl,P1020MBG-PC"; + + memory { + device_type = "memory"; + }; + + lbc: localbus@ffe05000 { + reg = <0x0 0xffe05000 0x0 0x1000>; + + /* NOR and L2 switch */ + ranges = <0x0 0x0 0x0 0xec000000 0x04000000 + 0x1 0x0 0x0 0xffa00000 0x00040000 + 0x2 0x0 0x0 0xffb00000 0x00020000>; + }; + + soc: soc@ffe00000 { + ranges = <0x0 0x0 0xffe00000 0x100000>; + }; + + pci0: pcie@ffe09000 { + reg = <0x0 0xffe09000 0x0 0x1000>; + ranges = <0x2000000 0x0 0xe0000000 0x0 0xa0000000 0x0 0x20000000 + 0x1000000 0x0 0x00000000 0x0 0xffc10000 0x0 0x10000>; + pcie@0 { + ranges = <0x2000000 0x0 0xe0000000 + 0x2000000 0x0 0xe0000000 + 0x0 0x20000000 + + 0x1000000 0x0 0x0 + 0x1000000 0x0 0x0 + 0x0 0x100000>; + }; + }; + + pci1: pcie@ffe0a000 { + reg = <0x0 0xffe0a000 0x0 0x1000>; + ranges = <0x2000000 0x0 0xe0000000 0x0 0x80000000 0x0 0x20000000 + 0x1000000 0x0 0x00000000 0x0 0xffc00000 0x0 0x10000>; + pcie@0 { + ranges = <0x2000000 0x0 0xe0000000 + 0x2000000 0x0 0xe0000000 + 0x0 0x20000000 + + 0x1000000 0x0 0x0 + 0x1000000 0x0 0x0 + 0x0 0x100000>; + }; + }; +}; + +/include/ "p1020mbg-pc.dtsi" +/include/ "fsl/p1020si-post.dtsi" diff --git a/arch/powerpc/boot/dts/p1020mbg-pc_36b.dts b/arch/powerpc/boot/dts/p1020mbg-pc_36b.dts new file mode 100644 index 000000000..9e9f40141 --- /dev/null +++ b/arch/powerpc/boot/dts/p1020mbg-pc_36b.dts @@ -0,0 +1,89 @@ +/* + * P1020 MBG-PC Device Tree Source (36-bit address map) + * + * Copyright 2012 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +/include/ "fsl/p1020si-pre.dtsi" +/ { + model = "fsl,P1020MBG-PC"; + compatible = "fsl,P1020MBG-PC"; + + memory { + device_type = "memory"; + }; + + lbc: localbus@fffe05000 { + reg = <0xf 0xffe05000 0x0 0x1000>; + + /* NOR and L2 switch */ + ranges = <0x0 0x0 0xf 0xec000000 0x04000000 + 0x1 0x0 0xf 0xffa00000 0x00040000 + 0x2 0x0 0xf 0xffb00000 0x00020000>; + }; + + soc: soc@fffe00000 { + ranges = <0x0 0xf 0xffe00000 0x100000>; + }; + + pci0: pcie@fffe09000 { + reg = <0xf 0xffe09000 0x0 0x1000>; + ranges = <0x2000000 0x0 0xe0000000 0xc 0x20000000 0x0 0x20000000 + 0x1000000 0x0 0x00000000 0xf 0xffc10000 0x0 0x10000>; + pcie@0 { + ranges = <0x2000000 0x0 0xe0000000 + 0x2000000 0x0 0xe0000000 + 0x0 0x20000000 + + 0x1000000 0x0 0x0 + 0x1000000 0x0 0x0 + 0x0 0x100000>; + }; + }; + + pci1: pcie@fffe0a000 { + reg = <0xf 0xffe0a000 0 0x1000>; + ranges = <0x2000000 0x0 0xe0000000 0xc 0x00000000 0x0 0x20000000 + 0x1000000 0x0 0x00000000 0xf 0xffc00000 0x0 0x10000>; + pcie@0 { + ranges = <0x2000000 0x0 0xe0000000 + 0x2000000 0x0 0xe0000000 + 0x0 0x20000000 + + 0x1000000 0x0 0x0 + 0x1000000 0x0 0x0 + 0x0 0x100000>; + }; + }; +}; + +/include/ "p1020mbg-pc.dtsi" +/include/ "fsl/p1020si-post.dtsi" diff --git a/arch/powerpc/boot/dts/p1020rdb-pc.dtsi b/arch/powerpc/boot/dts/p1020rdb-pc.dtsi new file mode 100644 index 000000000..c952cd37c --- /dev/null +++ b/arch/powerpc/boot/dts/p1020rdb-pc.dtsi @@ -0,0 +1,247 @@ +/* + * P1020 RDB-PC Device Tree Source stub (no addresses or top-level ranges) + * + * Copyright 2012 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +&lbc { + nor@0,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "cfi-flash"; + reg = <0x0 0x0 0x1000000>; + bank-width = <2>; + device-width = <1>; + + partition@0 { + /* This location must not be altered */ + /* 256KB for Vitesse 7385 Switch firmware */ + reg = <0x0 0x00040000>; + label = "NOR Vitesse-7385 Firmware"; + read-only; + }; + + partition@40000 { + /* 256KB for DTB Image */ + reg = <0x00040000 0x00040000>; + label = "NOR DTB Image"; + }; + + partition@80000 { + /* 3.5 MB for Linux Kernel Image */ + reg = <0x00080000 0x00380000>; + label = "NOR Linux Kernel Image"; + }; + + partition@400000 { + /* 11MB for JFFS2 based Root file System */ + reg = <0x00400000 0x00b00000>; + label = "NOR JFFS2 Root File System"; + }; + + partition@f00000 { + /* This location must not be altered */ + /* 512KB for u-boot Bootloader Image */ + /* 512KB for u-boot Environment Variables */ + reg = <0x00f00000 0x00100000>; + label = "NOR U-Boot Image"; + read-only; + }; + }; + + nand@1,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,p1020-fcm-nand", + "fsl,elbc-fcm-nand"; + reg = <0x1 0x0 0x40000>; + + partition@0 { + /* This location must not be altered */ + /* 1MB for u-boot Bootloader Image */ + reg = <0x0 0x00100000>; + label = "NAND U-Boot Image"; + read-only; + }; + + partition@100000 { + /* 1MB for DTB Image */ + reg = <0x00100000 0x00100000>; + label = "NAND DTB Image"; + }; + + partition@200000 { + /* 4MB for Linux Kernel Image */ + reg = <0x00200000 0x00400000>; + label = "NAND Linux Kernel Image"; + }; + + partition@600000 { + /* 4MB for Compressed Root file System Image */ + reg = <0x00600000 0x00400000>; + label = "NAND Compressed RFS Image"; + }; + + partition@a00000 { + /* 7MB for JFFS2 based Root file System */ + reg = <0x00a00000 0x00700000>; + label = "NAND JFFS2 Root File System"; + }; + + partition@1100000 { + /* 15MB for JFFS2 based Root file System */ + reg = <0x01100000 0x00f00000>; + label = "NAND Writable User area"; + }; + }; + + L2switch@2,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "vitesse-7385"; + reg = <0x2 0x0 0x20000>; + }; + + cpld@3,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "cpld"; + reg = <0x3 0x0 0x20000>; + read-only; + }; +}; + +&soc { + i2c@3000 { + rtc@68 { + compatible = "pericom,pt7c4338"; + reg = <0x68>; + }; + }; + + spi@7000 { + flash@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "spansion,s25sl12801"; + reg = <0>; + spi-max-frequency = <40000000>; /* input clock */ + + partition@u-boot { + /* 512KB for u-boot Bootloader Image */ + reg = <0x0 0x00080000>; + label = "u-boot"; + read-only; + }; + + partition@dtb { + /* 512KB for DTB Image*/ + reg = <0x00080000 0x00080000>; + label = "dtb"; + }; + + partition@kernel { + /* 4MB for Linux Kernel Image */ + reg = <0x00100000 0x00400000>; + label = "kernel"; + }; + + partition@fs { + /* 4MB for Compressed RFS Image */ + reg = <0x00500000 0x00400000>; + label = "file system"; + }; + + partition@jffs-fs { + /* 7MB for JFFS2 based RFS */ + reg = <0x00900000 0x00700000>; + label = "file system jffs2"; + }; + }; + }; + + usb@22000 { + phy_type = "ulpi"; + }; + + /* USB2 is shared with localbus, so it must be disabled + by default. We can't put 'status = "disabled";' here + since U-Boot doesn't clear the status property when + it enables USB2. OTOH, U-Boot does create a new node + when there isn't any. So, just comment it out. + usb@23000 { + phy_type = "ulpi"; + }; + */ + + mdio@24000 { + phy0: ethernet-phy@0 { + interrupt-parent = <&mpic>; + interrupts = <3 1>; + reg = <0x0>; + }; + + phy1: ethernet-phy@1 { + interrupt-parent = <&mpic>; + interrupts = <2 1>; + reg = <0x1>; + }; + + tbi0: tbi-phy@11 { + device_type = "tbi-phy"; + reg = <0x11>; + }; + }; + + mdio@25000 { + tbi1: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + + enet0: ethernet@b0000 { + fixed-link = <1 1 1000 0 0>; + phy-connection-type = "rgmii-id"; + + }; + + enet1: ethernet@b1000 { + phy-handle = <&phy0>; + tbi-handle = <&tbi1>; + phy-connection-type = "sgmii"; + }; + + enet2: ethernet@b2000 { + phy-handle = <&phy1>; + phy-connection-type = "rgmii-id"; + }; +}; diff --git a/arch/powerpc/boot/dts/p1020rdb-pc_32b.dts b/arch/powerpc/boot/dts/p1020rdb-pc_32b.dts new file mode 100644 index 000000000..4de69b726 --- /dev/null +++ b/arch/powerpc/boot/dts/p1020rdb-pc_32b.dts @@ -0,0 +1,90 @@ +/* + * P1020 RDB-PC Device Tree Source (32-bit address map) + * + * Copyright 2012 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +/include/ "fsl/p1020si-pre.dtsi" +/ { + model = "fsl,P1020RDB-PC"; + compatible = "fsl,P1020RDB-PC"; + + memory { + device_type = "memory"; + }; + + lbc: localbus@ffe05000 { + reg = <0 0xffe05000 0 0x1000>; + + /* NOR, NAND Flashes and Vitesse 5 port L2 switch */ + ranges = <0x0 0x0 0x0 0xef000000 0x01000000 + 0x1 0x0 0x0 0xff800000 0x00040000 + 0x2 0x0 0x0 0xffb00000 0x00020000 + 0x3 0x0 0x0 0xffa00000 0x00020000>; + }; + + soc: soc@ffe00000 { + ranges = <0x0 0x0 0xffe00000 0x100000>; + }; + + pci0: pcie@ffe09000 { + ranges = <0x2000000 0x0 0xa0000000 0 0xa0000000 0x0 0x20000000 + 0x1000000 0x0 0x00000000 0 0xffc10000 0x0 0x10000>; + reg = <0 0xffe09000 0 0x1000>; + pcie@0 { + ranges = <0x2000000 0x0 0xa0000000 + 0x2000000 0x0 0xa0000000 + 0x0 0x20000000 + + 0x1000000 0x0 0x0 + 0x1000000 0x0 0x0 + 0x0 0x100000>; + }; + }; + + pci1: pcie@ffe0a000 { + reg = <0 0xffe0a000 0 0x1000>; + ranges = <0x2000000 0x0 0x80000000 0 0x80000000 0x0 0x20000000 + 0x1000000 0x0 0x00000000 0 0xffc00000 0x0 0x10000>; + pcie@0 { + ranges = <0x2000000 0x0 0x80000000 + 0x2000000 0x0 0x80000000 + 0x0 0x20000000 + + 0x1000000 0x0 0x0 + 0x1000000 0x0 0x0 + 0x0 0x100000>; + }; + }; +}; + +/include/ "p1020rdb-pc.dtsi" +/include/ "fsl/p1020si-post.dtsi" diff --git a/arch/powerpc/boot/dts/p1020rdb-pc_36b.dts b/arch/powerpc/boot/dts/p1020rdb-pc_36b.dts new file mode 100644 index 000000000..5237da744 --- /dev/null +++ b/arch/powerpc/boot/dts/p1020rdb-pc_36b.dts @@ -0,0 +1,90 @@ +/* + * P1020 RDB-PC Device Tree Source (36-bit address map) + * + * Copyright 2012 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +/include/ "fsl/p1020si-pre.dtsi" +/ { + model = "fsl,P1020RDB-PC"; + compatible = "fsl,P1020RDB-PC"; + + memory { + device_type = "memory"; + }; + + lbc: localbus@fffe05000 { + reg = <0xf 0xffe05000 0 0x1000>; + + /* NOR, NAND Flashes and Vitesse 5 port L2 switch */ + ranges = <0x0 0x0 0xf 0xef000000 0x01000000 + 0x1 0x0 0xf 0xff800000 0x00040000 + 0x2 0x0 0xf 0xffb00000 0x00040000 + 0x3 0x0 0xf 0xffa00000 0x00020000>; + }; + + soc: soc@fffe00000 { + ranges = <0x0 0xf 0xffe00000 0x100000>; + }; + + pci0: pcie@fffe09000 { + reg = <0xf 0xffe09000 0 0x1000>; + ranges = <0x2000000 0x0 0xc0000000 0xc 0x20000000 0x0 0x20000000 + 0x1000000 0x0 0x00000000 0xf 0xffc10000 0x0 0x10000>; + pcie@0 { + ranges = <0x2000000 0x0 0xc0000000 + 0x2000000 0x0 0xc0000000 + 0x0 0x20000000 + + 0x1000000 0x0 0x0 + 0x1000000 0x0 0x0 + 0x0 0x100000>; + }; + }; + + pci1: pcie@fffe0a000 { + reg = <0xf 0xffe0a000 0 0x1000>; + ranges = <0x2000000 0x0 0x80000000 0xc 0x00000000 0x0 0x20000000 + 0x1000000 0x0 0x00000000 0xf 0xffc00000 0x0 0x10000>; + pcie@0 { + ranges = <0x2000000 0x0 0x80000000 + 0x2000000 0x0 0x80000000 + 0x0 0x20000000 + + 0x1000000 0x0 0x0 + 0x1000000 0x0 0x0 + 0x0 0x100000>; + }; + }; +}; + +/include/ "p1020rdb-pc.dtsi" +/include/ "fsl/p1020si-post.dtsi" diff --git a/arch/powerpc/boot/dts/p1020rdb-pc_camp_core0.dts b/arch/powerpc/boot/dts/p1020rdb-pc_camp_core0.dts new file mode 100644 index 000000000..f41151593 --- /dev/null +++ b/arch/powerpc/boot/dts/p1020rdb-pc_camp_core0.dts @@ -0,0 +1,64 @@ +/* + * P1020 RDB-PC Core0 Device Tree Source in CAMP mode. + * + * In CAMP mode, each core needs to have its own dts. Only mpic and L2 cache + * can be shared, all the other devices must be assigned to one core only. + * This dts file allows core0 to have memory, l2, i2c, spi, gpio, tdm, dma, usb, + * eth1, eth2, sdhc, crypto, global-util, message, pci0, pci1, msi. + * + * Please note to add "-b 0" for core0's dts compiling. + * + * Copyright 2012 Freescale Semiconductor Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +/include/ "p1020rdb-pc_32b.dts" + +/ { + model = "fsl,P1020RDB-PC"; + compatible = "fsl,P1020RDB-PC"; + + aliases { + ethernet1 = &enet1; + ethernet2 = &enet2; + serial0 = &serial0; + pci0 = &pci0; + pci1 = &pci1; + }; + + cpus { + PowerPC,P1020@1 { + status = "disabled"; + }; + }; + + memory { + device_type = "memory"; + }; + + localbus@ffe05000 { + status = "disabled"; + }; + + soc@ffe00000 { + serial1: serial@4600 { + status = "disabled"; + }; + + enet0: ethernet@b0000 { + status = "disabled"; + }; + + mpic: pic@40000 { + protected-sources = < + 42 29 30 34 /* serial1, enet0-queue-group0 */ + 17 18 24 45 /* enet0-queue-group1, crypto */ + >; + pic-no-reset; + }; + }; +}; diff --git a/arch/powerpc/boot/dts/p1020rdb-pc_camp_core1.dts b/arch/powerpc/boot/dts/p1020rdb-pc_camp_core1.dts new file mode 100644 index 000000000..a91335ad8 --- /dev/null +++ b/arch/powerpc/boot/dts/p1020rdb-pc_camp_core1.dts @@ -0,0 +1,142 @@ +/* + * P1020 RDB-PC Core1 Device Tree Source in CAMP mode. + * + * In CAMP mode, each core needs to have its own dts. Only mpic and L2 cache + * can be shared, all the other devices must be assigned to one core only. + * This dts allows core1 to have l2, eth0, crypto. + * + * Please note to add "-b 1" for core1's dts compiling. + * + * Copyright 2012 Freescale Semiconductor Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +/include/ "p1020rdb-pc_32b.dts" + +/ { + model = "fsl,P1020RDB-PC"; + compatible = "fsl,P1020RDB-PC"; + + aliases { + ethernet0 = &enet0; + serial0 = &serial1; + }; + + cpus { + PowerPC,P1020@0 { + status = "disabled"; + }; + }; + + memory { + device_type = "memory"; + }; + + localbus@ffe05000 { + status = "disabled"; + }; + + soc@ffe00000 { + ecm-law@0 { + status = "disabled"; + }; + + ecm@1000 { + status = "disabled"; + }; + + memory-controller@2000 { + status = "disabled"; + }; + + i2c@3000 { + status = "disabled"; + }; + + i2c@3100 { + status = "disabled"; + }; + + serial0: serial@4500 { + status = "disabled"; + }; + + spi@7000 { + status = "disabled"; + }; + + gpio: gpio-controller@f000 { + status = "disabled"; + }; + + dma@21300 { + status = "disabled"; + }; + + mdio@24000 { + status = "disabled"; + }; + + mdio@25000 { + status = "disabled"; + }; + + enet1: ethernet@b1000 { + status = "disabled"; + }; + + enet2: ethernet@b2000 { + status = "disabled"; + }; + + usb@22000 { + status = "disabled"; + }; + + sdhci@2e000 { + status = "disabled"; + }; + + mpic: pic@40000 { + protected-sources = < + 16 /* ecm, mem, L2, pci0, pci1 */ + 43 42 59 /* i2c, serial0, spi */ + 47 63 62 /* gpio, tdm */ + 20 21 22 23 /* dma */ + 03 02 /* mdio */ + 35 36 40 /* enet1-queue-group0 */ + 51 52 67 /* enet1-queue-group1 */ + 31 32 33 /* enet2-queue-group0 */ + 25 26 27 /* enet2-queue-group1 */ + 28 72 58 /* usb, sdhci, crypto */ + 0xb0 0xb1 0xb2 /* message */ + 0xb3 0xb4 0xb5 + 0xb6 0xb7 + 0xe0 0xe1 0xe2 /* msi */ + 0xe3 0xe4 0xe5 + 0xe6 0xe7 /* sdhci, crypto , pci */ + >; + pic-no-reset; + }; + + msi@41600 { + status = "disabled"; + }; + + global-utilities@e0000 { //global utilities block + status = "disabled"; + }; + }; + + pci0: pcie@ffe09000 { + status = "disabled"; + }; + + pci1: pcie@ffe0a000 { + status = "disabled"; + }; +}; diff --git a/arch/powerpc/boot/dts/p1020rdb-pd.dts b/arch/powerpc/boot/dts/p1020rdb-pd.dts new file mode 100644 index 000000000..987017ea3 --- /dev/null +++ b/arch/powerpc/boot/dts/p1020rdb-pd.dts @@ -0,0 +1,280 @@ +/* + * P1020 RDB-PD Device Tree Source (32-bit address map) + * + * Copyright 2013 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +/include/ "fsl/p1020si-pre.dtsi" +/ { + model = "fsl,P1020RDB-PD"; + compatible = "fsl,P1020RDB-PD"; + + memory { + device_type = "memory"; + }; + + lbc: localbus@ffe05000 { + reg = <0x0 0xffe05000 0x0 0x1000>; + + /* NOR, NAND flash, L2 switch and CPLD */ + ranges = <0x0 0x0 0x0 0xec000000 0x04000000 + 0x1 0x0 0x0 0xff800000 0x00040000 + 0x2 0x0 0x0 0xffa00000 0x00020000 + 0x3 0x0 0x0 0xffb00000 0x00020000>; + + nor@0,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "cfi-flash"; + reg = <0x0 0x0 0x4000000>; + bank-width = <2>; + device-width = <1>; + + partition@0 { + /* 128KB for DTB Image */ + reg = <0x0 0x00020000>; + label = "NOR DTB Image"; + }; + + partition@20000 { + /* 3.875 MB for Linux Kernel Image */ + reg = <0x00020000 0x003e0000>; + label = "NOR Linux Kernel Image"; + }; + + partition@400000 { + /* 58MB for Root file System */ + reg = <0x00400000 0x03a00000>; + label = "NOR Root File System"; + }; + + partition@3e00000 { + /* This location must not be altered */ + /* 1M for Vitesse 7385 Switch firmware */ + reg = <0x3e00000 0x00100000>; + label = "NOR Vitesse-7385 Firmware"; + read-only; + }; + + partition@3f00000 { + /* This location must not be altered */ + /* 512KB for u-boot Bootloader Image */ + /* 512KB for u-boot Environment Variables */ + reg = <0x03f00000 0x00100000>; + label = "NOR U-Boot Image"; + read-only; + }; + }; + + nand@1,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,p1020-fcm-nand", + "fsl,elbc-fcm-nand"; + reg = <0x1 0x0 0x40000>; + + partition@0 { + /* This location must not be altered */ + /* 1MB for u-boot Bootloader Image */ + reg = <0x0 0x00100000>; + label = "NAND U-Boot Image"; + read-only; + }; + + partition@100000 { + /* 1MB for DTB Image */ + reg = <0x00100000 0x00100000>; + label = "NAND DTB Image"; + }; + + partition@200000 { + /* 4MB for Linux Kernel Image */ + reg = <0x00200000 0x00400000>; + label = "NAND Linux Kernel Image"; + }; + + partition@600000 { + /* 122MB for File System Image */ + reg = <0x00600000 0x07a00000>; + label = "NAND File System Image"; + }; + }; + + cpld@2,0 { + compatible = "fsl,p1020rdb-pd-cpld"; + reg = <0x2 0x0 0x20000>; + }; + + L2switch@3,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "vitesse-7385"; + reg = <0x3 0x0 0x20000>; + }; + }; + + soc: soc@ffe00000 { + ranges = <0x0 0x0 0xffe00000 0x100000>; + + i2c@3000 { + rtc@68 { + compatible = "dallas,ds1339"; + reg = <0x68>; + }; + }; + + spi@7000 { + flash@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "spansion,s25sl12801"; + reg = <0>; + /* input clock */ + spi-max-frequency = <40000000>; + + partition@0 { + /* 512KB for u-boot Bootloader Image */ + reg = <0x0 0x00080000>; + label = "SPI U-Boot Image"; + read-only; + }; + + partition@80000 { + /* 512KB for DTB Image*/ + reg = <0x00080000 0x00080000>; + label = "SPI DTB Image"; + }; + + partition@100000 { + /* 4MB for Linux Kernel Image */ + reg = <0x00100000 0x00400000>; + label = "SPI Linux Kernel Image"; + }; + + partition@500000 { + /* 11MB for FS System Image */ + reg = <0x00500000 0x00b00000>; + label = "SPI File System Image"; + }; + }; + + slic@0 { + compatible = "zarlink,le88266"; + reg = <1>; + spi-max-frequency = <8000000>; + }; + + slic@1 { + compatible = "zarlink,le88266"; + reg = <2>; + spi-max-frequency = <8000000>; + }; + }; + + mdio@24000 { + phy0: ethernet-phy@0 { + interrupts = <3 1 0 0>; + reg = <0x0>; + }; + + phy1: ethernet-phy@1 { + interrupts = <2 1 0 0>; + reg = <0x1>; + }; + }; + + mdio@25000 { + tbi1: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + + mdio@26000 { + tbi2: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + + enet0: ethernet@b0000 { + fixed-link = <1 1 1000 0 0>; + phy-connection-type = "rgmii-id"; + }; + + enet1: ethernet@b1000 { + phy-handle = <&phy0>; + tbi-handle = <&tbi1>; + phy-connection-type = "sgmii"; + }; + + enet2: ethernet@b2000 { + phy-handle = <&phy1>; + phy-connection-type = "rgmii-id"; + }; + + usb@22000 { + phy_type = "ulpi"; + }; + }; + + pci0: pcie@ffe09000 { + reg = <0x0 0xffe09000 0x0 0x1000>; + ranges = <0x2000000 0x0 0xa0000000 0x0 0xa0000000 0x0 0x20000000 + 0x1000000 0x0 0x00000000 0x0 0xffc10000 0x0 0x10000>; + pcie@0 { + ranges = <0x2000000 0x0 0xa0000000 + 0x2000000 0x0 0xa0000000 + 0x0 0x20000000 + + 0x1000000 0x0 0x0 + 0x1000000 0x0 0x0 + 0x0 0x100000>; + }; + }; + + pci1: pcie@ffe0a000 { + reg = <0x0 0xffe0a000 0x0 0x1000>; + ranges = <0x2000000 0x0 0x80000000 0x0 0x80000000 0x0 0x20000000 + 0x1000000 0x0 0x00000000 0x0 0xffc00000 0x0 0x10000>; + pcie@0 { + ranges = <0x2000000 0x0 0x80000000 + 0x2000000 0x0 0x80000000 + 0x0 0x20000000 + + 0x1000000 0x0 0x0 + 0x1000000 0x0 0x0 + 0x0 0x100000>; + }; + }; +}; + +/include/ "fsl/p1020si-post.dtsi" diff --git a/arch/powerpc/boot/dts/p1020rdb.dts b/arch/powerpc/boot/dts/p1020rdb.dts new file mode 100644 index 000000000..518bf99b1 --- /dev/null +++ b/arch/powerpc/boot/dts/p1020rdb.dts @@ -0,0 +1,66 @@ +/* + * P1020 RDB Device Tree Source + * + * Copyright 2009-2011 Freescale Semiconductor Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +/include/ "fsl/p1020si-pre.dtsi" +/ { + model = "fsl,P1020RDB"; + compatible = "fsl,P1020RDB"; + + memory { + device_type = "memory"; + }; + + board_lbc: lbc: localbus@ffe05000 { + reg = <0 0xffe05000 0 0x1000>; + + /* NOR, NAND Flashes and Vitesse 5 port L2 switch */ + ranges = <0x0 0x0 0x0 0xef000000 0x01000000 + 0x1 0x0 0x0 0xffa00000 0x00040000 + 0x2 0x0 0x0 0xffb00000 0x00020000>; + }; + + board_soc: soc: soc@ffe00000 { + ranges = <0x0 0x0 0xffe00000 0x100000>; + }; + + pci0: pcie@ffe09000 { + ranges = <0x2000000 0x0 0xa0000000 0 0xa0000000 0x0 0x20000000 + 0x1000000 0x0 0x00000000 0 0xffc10000 0x0 0x10000>; + reg = <0 0xffe09000 0 0x1000>; + pcie@0 { + ranges = <0x2000000 0x0 0xa0000000 + 0x2000000 0x0 0xa0000000 + 0x0 0x20000000 + + 0x1000000 0x0 0x0 + 0x1000000 0x0 0x0 + 0x0 0x100000>; + }; + }; + + pci1: pcie@ffe0a000 { + reg = <0 0xffe0a000 0 0x1000>; + ranges = <0x2000000 0x0 0x80000000 0 0x80000000 0x0 0x20000000 + 0x1000000 0x0 0x00000000 0 0xffc00000 0x0 0x10000>; + pcie@0 { + ranges = <0x2000000 0x0 0x80000000 + 0x2000000 0x0 0x80000000 + 0x0 0x20000000 + + 0x1000000 0x0 0x0 + 0x1000000 0x0 0x0 + 0x0 0x100000>; + }; + }; +}; + +/include/ "p1020rdb.dtsi" +/include/ "fsl/p1020si-post.dtsi" diff --git a/arch/powerpc/boot/dts/p1020rdb.dtsi b/arch/powerpc/boot/dts/p1020rdb.dtsi new file mode 100644 index 000000000..1fb7e0e09 --- /dev/null +++ b/arch/powerpc/boot/dts/p1020rdb.dtsi @@ -0,0 +1,246 @@ +/* + * P1020 RDB Device Tree Source stub (no addresses or top-level ranges) + * + * Copyright 2011-2012 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +&board_lbc { + nor@0,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "cfi-flash"; + reg = <0x0 0x0 0x1000000>; + bank-width = <2>; + device-width = <1>; + + partition@0 { + /* This location must not be altered */ + /* 256KB for Vitesse 7385 Switch firmware */ + reg = <0x0 0x00040000>; + label = "NOR (RO) Vitesse-7385 Firmware"; + read-only; + }; + + partition@40000 { + /* 256KB for DTB Image */ + reg = <0x00040000 0x00040000>; + label = "NOR (RO) DTB Image"; + read-only; + }; + + partition@80000 { + /* 3.5 MB for Linux Kernel Image */ + reg = <0x00080000 0x00380000>; + label = "NOR (RO) Linux Kernel Image"; + read-only; + }; + + partition@400000 { + /* 11MB for JFFS2 based Root file System */ + reg = <0x00400000 0x00b00000>; + label = "NOR (RW) JFFS2 Root File System"; + }; + + partition@f00000 { + /* This location must not be altered */ + /* 512KB for u-boot Bootloader Image */ + /* 512KB for u-boot Environment Variables */ + reg = <0x00f00000 0x00100000>; + label = "NOR (RO) U-Boot Image"; + read-only; + }; + }; + + nand@1,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,p1020-fcm-nand", + "fsl,elbc-fcm-nand"; + reg = <0x1 0x0 0x40000>; + + partition@0 { + /* This location must not be altered */ + /* 1MB for u-boot Bootloader Image */ + reg = <0x0 0x00100000>; + label = "NAND (RO) U-Boot Image"; + read-only; + }; + + partition@100000 { + /* 1MB for DTB Image */ + reg = <0x00100000 0x00100000>; + label = "NAND (RO) DTB Image"; + read-only; + }; + + partition@200000 { + /* 4MB for Linux Kernel Image */ + reg = <0x00200000 0x00400000>; + label = "NAND (RO) Linux Kernel Image"; + read-only; + }; + + partition@600000 { + /* 4MB for Compressed Root file System Image */ + reg = <0x00600000 0x00400000>; + label = "NAND (RO) Compressed RFS Image"; + read-only; + }; + + partition@a00000 { + /* 7MB for JFFS2 based Root file System */ + reg = <0x00a00000 0x00700000>; + label = "NAND (RW) JFFS2 Root File System"; + }; + + partition@1100000 { + /* 15MB for JFFS2 based Root file System */ + reg = <0x01100000 0x00f00000>; + label = "NAND (RW) Writable User area"; + }; + }; + + L2switch@2,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "vitesse-7385"; + reg = <0x2 0x0 0x20000>; + }; +}; + +&board_soc { + i2c@3000 { + rtc@68 { + compatible = "dallas,ds1339"; + reg = <0x68>; + }; + }; + + spi@7000 { + flash@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "spansion,s25sl12801"; + reg = <0>; + spi-max-frequency = <40000000>; /* input clock */ + + partition@u-boot { + /* 512KB for u-boot Bootloader Image */ + reg = <0x0 0x00080000>; + label = "u-boot"; + read-only; + }; + + partition@dtb { + /* 512KB for DTB Image */ + reg = <0x00080000 0x00080000>; + label = "dtb"; + read-only; + }; + + partition@kernel { + /* 4MB for Linux Kernel Image */ + reg = <0x00100000 0x00400000>; + label = "kernel"; + read-only; + }; + + partition@fs { + /* 4MB for Compressed RFS Image */ + reg = <0x00500000 0x00400000>; + label = "file system"; + read-only; + }; + + partition@jffs-fs { + /* 7MB for JFFS2 based RFS */ + reg = <0x00900000 0x00700000>; + label = "file system jffs2"; + }; + }; + }; + + usb@22000 { + phy_type = "ulpi"; + dr_mode = "host"; + }; + + /* USB2 is shared with localbus. It is used + only in case of SPI and SD boot after + appropriate device-tree fixup done by uboot */ + usb@23000 { + phy_type = "ulpi"; + dr_mode = "host"; + }; + + mdio@24000 { + phy0: ethernet-phy@0 { + interrupt-parent = <&mpic>; + interrupts = <3 1>; + reg = <0x0>; + }; + + phy1: ethernet-phy@1 { + interrupt-parent = <&mpic>; + interrupts = <2 1>; + reg = <0x1>; + }; + + tbi-phy@2 { + device_type = "tbi-phy"; + reg = <0x2>; + }; + }; + + mdio@25000 { + tbi0: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + + enet0: ethernet@b0000 { + fixed-link = <1 1 1000 0 0>; + phy-connection-type = "rgmii-id"; + + }; + + enet1: ethernet@b1000 { + phy-handle = <&phy0>; + tbi-handle = <&tbi0>; + phy-connection-type = "sgmii"; + }; + + enet2: ethernet@b2000 { + phy-handle = <&phy1>; + phy-connection-type = "rgmii-id"; + }; +}; diff --git a/arch/powerpc/boot/dts/p1020rdb_36b.dts b/arch/powerpc/boot/dts/p1020rdb_36b.dts new file mode 100644 index 000000000..bdbdb6097 --- /dev/null +++ b/arch/powerpc/boot/dts/p1020rdb_36b.dts @@ -0,0 +1,66 @@ +/* + * P1020 RDB Device Tree Source (36-bit address map) + * + * Copyright 2009-2011 Freescale Semiconductor Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +/include/ "fsl/p1020si-pre.dtsi" +/ { + model = "fsl,P1020RDB"; + compatible = "fsl,P1020RDB"; + + memory { + device_type = "memory"; + }; + + board_lbc: lbc: localbus@fffe05000 { + reg = <0xf 0xffe05000 0 0x1000>; + + /* NOR, NAND Flashes and Vitesse 5 port L2 switch */ + ranges = <0x0 0x0 0xf 0xef000000 0x01000000 + 0x1 0x0 0xf 0xffa00000 0x00040000 + 0x2 0x0 0xf 0xffb00000 0x00020000>; + }; + + board_soc: soc: soc@fffe00000 { + ranges = <0x0 0xf 0xffe00000 0x100000>; + }; + + pci0: pcie@fffe09000 { + reg = <0xf 0xffe09000 0 0x1000>; + ranges = <0x2000000 0x0 0xc0000000 0xc 0x20000000 0x0 0x20000000 + 0x1000000 0x0 0x00000000 0xf 0xffc10000 0x0 0x10000>; + pcie@0 { + ranges = <0x2000000 0x0 0xc0000000 + 0x2000000 0x0 0xc0000000 + 0x0 0x20000000 + + 0x1000000 0x0 0x0 + 0x1000000 0x0 0x0 + 0x0 0x100000>; + }; + }; + + pci1: pcie@fffe0a000 { + reg = <0xf 0xffe0a000 0 0x1000>; + ranges = <0x2000000 0x0 0x80000000 0xc 0x00000000 0x0 0x20000000 + 0x1000000 0x0 0x00000000 0xf 0xffc00000 0x0 0x10000>; + pcie@0 { + ranges = <0x2000000 0x0 0x80000000 + 0x2000000 0x0 0x80000000 + 0x0 0x20000000 + + 0x1000000 0x0 0x0 + 0x1000000 0x0 0x0 + 0x0 0x100000>; + }; + }; +}; + +/include/ "p1020rdb.dtsi" +/include/ "fsl/p1020si-post.dtsi" diff --git a/arch/powerpc/boot/dts/p1020utm-pc.dtsi b/arch/powerpc/boot/dts/p1020utm-pc.dtsi new file mode 100644 index 000000000..7ea85eabc --- /dev/null +++ b/arch/powerpc/boot/dts/p1020utm-pc.dtsi @@ -0,0 +1,140 @@ +/* + * P1020 UTM-PC Device Tree Source stub (no addresses or top-level ranges) + * + * Copyright 2012 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +&lbc { + nor@0,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "cfi-flash"; + reg = <0x0 0x0 0x2000000>; + bank-width = <2>; + device-width = <1>; + + partition@0 { + /* 256KB for DTB Image */ + reg = <0x0 0x00040000>; + label = "NOR DTB Image"; + }; + + partition@40000 { + /* 3.75 MB for Linux Kernel Image */ + reg = <0x00040000 0x003c0000>; + label = "NOR Linux Kernel Image"; + }; + + partition@400000 { + /* 27MB for Root file System */ + reg = <0x00400000 0x01b00000>; + label = "NOR Root File System"; + }; + + partition@1f00000 { + /* This location must not be altered */ + /* 512KB for u-boot Bootloader Image */ + /* 512KB for u-boot Environment Variables */ + reg = <0x01f00000 0x00100000>; + label = "NOR U-Boot Image"; + read-only; + }; + }; +}; + +&soc { + i2c@3000 { + rtc@68 { + compatible = "dallas,ds1339"; + reg = <0x68>; + }; + }; + + mdio@24000 { + phy0: ethernet-phy@0 { + interrupts = <3 1 0 0>; + reg = <0x0>; + }; + phy1: ethernet-phy@1 { + interrupts = <2 1 0 0>; + reg = <0x1>; + }; + phy2: ethernet-phy@2 { + interrupts = <1 1 0 0>; + reg = <0x2>; + }; + }; + + mdio@25000 { + tbi1: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + + mdio@26000 { + tbi2: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + + enet0: ethernet@b0000 { + phy-handle = <&phy2>; + phy-connection-type = "rgmii-id"; + }; + + enet1: ethernet@b1000 { + phy-handle = <&phy0>; + tbi-handle = <&tbi1>; + phy-connection-type = "sgmii"; + }; + + enet2: ethernet@b2000 { + phy-handle = <&phy1>; + phy-connection-type = "rgmii-id"; + }; + + usb@22000 { + phy_type = "ulpi"; + }; + + /* USB2 is shared with localbus, so it must be disabled + by default. We can't put 'status = "disabled";' here + since U-Boot doesn't clear the status property when + it enables USB2. OTOH, U-Boot does create a new node + when there isn't any. So, just comment it out. + */ + usb@23000 { + status = "disabled"; + phy_type = "ulpi"; + }; +}; diff --git a/arch/powerpc/boot/dts/p1020utm-pc_32b.dts b/arch/powerpc/boot/dts/p1020utm-pc_32b.dts new file mode 100644 index 000000000..4bfdd8971 --- /dev/null +++ b/arch/powerpc/boot/dts/p1020utm-pc_32b.dts @@ -0,0 +1,89 @@ +/* + * P1020 UTM-PC Device Tree Source (32-bit address map) + * + * Copyright 2012 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +/include/ "fsl/p1020si-pre.dtsi" +/ { + model = "fsl,P1020UTM-PC"; + compatible = "fsl,P1020UTM-PC"; + + memory { + device_type = "memory"; + }; + + lbc: localbus@ffe05000 { + reg = <0x0 0xffe05000 0x0 0x1000>; + + /* NOR */ + ranges = <0x0 0x0 0x0 0xec000000 0x02000000 + 0x1 0x0 0x0 0xffa00000 0x00040000 + 0x2 0x0 0x0 0xffb00000 0x00020000>; + }; + + soc: soc@ffe00000 { + ranges = <0x0 0x0 0xffe00000 0x100000>; + }; + + pci0: pcie@ffe09000 { + reg = <0x0 0xffe09000 0x0 0x1000>; + ranges = <0x2000000 0x0 0xe0000000 0x0 0xa0000000 0x0 0x20000000 + 0x1000000 0x0 0x00000000 0x0 0xffc10000 0x0 0x10000>; + pcie@0 { + ranges = <0x2000000 0x0 0xe0000000 + 0x2000000 0x0 0xe0000000 + 0x0 0x20000000 + + 0x1000000 0x0 0x0 + 0x1000000 0x0 0x0 + 0x0 0x100000>; + }; + }; + + pci1: pcie@ffe0a000 { + reg = <0x0 0xffe0a000 0x0 0x1000>; + ranges = <0x2000000 0x0 0xe0000000 0x0 0x80000000 0x0 0x20000000 + 0x1000000 0x0 0x00000000 0x0 0xffc00000 0x0 0x10000>; + pcie@0 { + ranges = <0x2000000 0x0 0xe0000000 + 0x2000000 0x0 0xe0000000 + 0x0 0x20000000 + + 0x1000000 0x0 0x0 + 0x1000000 0x0 0x0 + 0x0 0x100000>; + }; + }; +}; + +/include/ "p1020utm-pc.dtsi" +/include/ "fsl/p1020si-post.dtsi" diff --git a/arch/powerpc/boot/dts/p1020utm-pc_36b.dts b/arch/powerpc/boot/dts/p1020utm-pc_36b.dts new file mode 100644 index 000000000..abec53557 --- /dev/null +++ b/arch/powerpc/boot/dts/p1020utm-pc_36b.dts @@ -0,0 +1,89 @@ +/* + * P1020 UTM-PC Device Tree Source (36-bit address map) + * + * Copyright 2012 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +/include/ "fsl/p1020si-pre.dtsi" +/ { + model = "fsl,P1020UTM-PC"; + compatible = "fsl,P1020UTM-PC"; + + memory { + device_type = "memory"; + }; + + lbc: localbus@fffe05000 { + reg = <0xf 0xffe05000 0x0 0x1000>; + + /* NOR */ + ranges = <0x0 0x0 0xf 0xec000000 0x02000000 + 0x1 0x0 0xf 0xffa00000 0x00040000 + 0x2 0x0 0xf 0xffb00000 0x00020000>; + }; + + soc: soc@fffe00000 { + ranges = <0x0 0xf 0xffe00000 0x100000>; + }; + + pci0: pcie@fffe09000 { + reg = <0xf 0xffe09000 0x0 0x1000>; + ranges = <0x2000000 0x0 0xe0000000 0xc 0x20000000 0x0 0x20000000 + 0x1000000 0x0 0x00000000 0xf 0xffc10000 0x0 0x10000>; + pcie@0 { + ranges = <0x2000000 0x0 0xe0000000 + 0x2000000 0x0 0xe0000000 + 0x0 0x20000000 + + 0x1000000 0x0 0x0 + 0x1000000 0x0 0x0 + 0x0 0x100000>; + }; + }; + + pci1: pcie@fffe0a000 { + reg = <0xf 0xffe0a000 0 0x1000>; + ranges = <0x2000000 0x0 0xe0000000 0xc 0x00000000 0x0 0x20000000 + 0x1000000 0x0 0x00000000 0xf 0xffc00000 0x0 0x10000>; + pcie@0 { + ranges = <0x2000000 0x0 0xe0000000 + 0x2000000 0x0 0xe0000000 + 0x0 0x20000000 + + 0x1000000 0x0 0x0 + 0x1000000 0x0 0x0 + 0x0 0x100000>; + }; + }; +}; + +/include/ "p1020utm-pc.dtsi" +/include/ "fsl/p1020si-post.dtsi" diff --git a/arch/powerpc/boot/dts/p1021mds.dts b/arch/powerpc/boot/dts/p1021mds.dts new file mode 100644 index 000000000..76559044d --- /dev/null +++ b/arch/powerpc/boot/dts/p1021mds.dts @@ -0,0 +1,323 @@ +/* + * P1021 MDS Device Tree Source + * + * Copyright 2010,2012 Freescale Semiconductor Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +/include/ "fsl/p1021si-pre.dtsi" +/ { + model = "fsl,P1021"; + compatible = "fsl,P1021MDS"; + + aliases { + ethernet3 = &enet3; + ethernet4 = &enet4; + }; + + memory { + device_type = "memory"; + }; + + lbc: localbus@ffe05000 { + reg = <0x0 0xffe05000 0x0 0x1000>; + + /* NAND Flash, BCSR, PMC0/1*/ + ranges = <0x0 0x0 0x0 0xfc000000 0x02000000 + 0x1 0x0 0x0 0xf8000000 0x00008000 + 0x2 0x0 0x0 0xf8010000 0x00020000 + 0x3 0x0 0x0 0xf8020000 0x00020000>; + + nand@0,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,p1021-fcm-nand", + "fsl,elbc-fcm-nand"; + reg = <0x0 0x0 0x40000>; + + partition@0 { + /* This location must not be altered */ + /* 1MB for u-boot Bootloader Image */ + reg = <0x0 0x00100000>; + label = "NAND (RO) U-Boot Image"; + read-only; + }; + + partition@100000 { + /* 1MB for DTB Image */ + reg = <0x00100000 0x00100000>; + label = "NAND (RO) DTB Image"; + read-only; + }; + + partition@200000 { + /* 4MB for Linux Kernel Image */ + reg = <0x00200000 0x00400000>; + label = "NAND (RO) Linux Kernel Image"; + read-only; + }; + + partition@600000 { + /* 5MB for Compressed Root file System Image */ + reg = <0x00600000 0x00500000>; + label = "NAND (RO) Compressed RFS Image"; + read-only; + }; + + partition@b00000 { + /* 6MB for JFFS2 based Root file System */ + reg = <0x00a00000 0x00600000>; + label = "NAND (RW) JFFS2 Root File System"; + }; + + partition@1100000 { + /* 14MB for JFFS2 based Root file System */ + reg = <0x01100000 0x00e00000>; + label = "NAND (RW) Writable User area"; + }; + + partition@1f00000 { + /* 1MB for microcode */ + reg = <0x01f00000 0x00100000>; + label = "NAND (RO) QE Ucode"; + read-only; + }; + }; + + bcsr@1,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,p1021mds-bcsr"; + reg = <1 0 0x8000>; + ranges = <0 1 0 0x8000>; + }; + + pib@2,0 { + compatible = "fsl,p1021mds-pib"; + reg = <2 0 0x10000>; + }; + + pib@3,0 { + compatible = "fsl,p1021mds-pib"; + reg = <3 0 0x10000>; + }; + }; + + soc: soc@ffe00000 { + compatible = "fsl,p1021-immr", "simple-bus"; + ranges = <0x0 0x0 0xffe00000 0x100000>; + + i2c@3000 { + rtc@68 { + compatible = "dallas,ds1374"; + reg = <0x68>; + }; + }; + + spi@7000 { + + flash@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "spansion,s25sl12801"; + reg = <0>; + spi-max-frequency = <40000000>; /* input clock */ + + partition@u-boot { + label = "u-boot-spi"; + reg = <0x00000000 0x00100000>; + read-only; + }; + partition@kernel { + label = "kernel-spi"; + reg = <0x00100000 0x00500000>; + read-only; + }; + partition@dtb { + label = "dtb-spi"; + reg = <0x00600000 0x00100000>; + read-only; + }; + partition@fs { + label = "file system-spi"; + reg = <0x00700000 0x00900000>; + }; + }; + }; + + usb@22000 { + phy_type = "ulpi"; + dr_mode = "host"; + }; + + mdio@24000 { + phy0: ethernet-phy@0 { + interrupts = <1 1 0 0>; + reg = <0x0>; + }; + phy1: ethernet-phy@1 { + interrupts = <2 1 0 0>; + reg = <0x1>; + }; + phy4: ethernet-phy@4 { + reg = <0x4>; + }; + tbi-phy@5 { + device_type = "tbi-phy"; + reg = <0x5>; + }; + }; + + mdio@25000 { + tbi0: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + + ethernet@b0000 { + phy-handle = <&phy0>; + phy-connection-type = "rgmii-id"; + }; + + ethernet@b1000 { + phy-handle = <&phy4>; + tbi-handle = <&tbi0>; + phy-connection-type = "sgmii"; + }; + + ethernet@b2000 { + phy-handle = <&phy1>; + phy-connection-type = "rgmii-id"; + }; + + par_io@e0100 { + #address-cells = <1>; + #size-cells = <1>; + reg = <0xe0100 0x60>; + ranges = <0x0 0xe0100 0x60>; + device_type = "par_io"; + num-ports = <3>; + pio1: ucc_pin@01 { + pio-map = < + /* port pin dir open_drain assignment has_irq */ + 0x1 0x13 0x1 0x0 0x1 0x0 /* QE_MUX_MDC */ + 0x1 0x14 0x3 0x0 0x1 0x0 /* QE_MUX_MDIO */ + 0x0 0x17 0x2 0x0 0x2 0x0 /* CLK12 */ + 0x0 0x18 0x2 0x0 0x1 0x0 /* CLK9 */ + 0x0 0x7 0x1 0x0 0x2 0x0 /* ENET1_TXD0_SER1_TXD0 */ + 0x0 0x9 0x1 0x0 0x2 0x0 /* ENET1_TXD1_SER1_TXD1 */ + 0x0 0xb 0x1 0x0 0x2 0x0 /* ENET1_TXD2_SER1_TXD2 */ + 0x0 0xc 0x1 0x0 0x2 0x0 /* ENET1_TXD3_SER1_TXD3 */ + 0x0 0x6 0x2 0x0 0x2 0x0 /* ENET1_RXD0_SER1_RXD0 */ + 0x0 0xa 0x2 0x0 0x2 0x0 /* ENET1_RXD1_SER1_RXD1 */ + 0x0 0xe 0x2 0x0 0x2 0x0 /* ENET1_RXD2_SER1_RXD2 */ + 0x0 0xf 0x2 0x0 0x2 0x0 /* ENET1_RXD3_SER1_RXD3 */ + 0x0 0x5 0x1 0x0 0x2 0x0 /* ENET1_TX_EN_SER1_RTS_B */ + 0x0 0xd 0x1 0x0 0x2 0x0 /* ENET1_TX_ER */ + 0x0 0x4 0x2 0x0 0x2 0x0 /* ENET1_RX_DV_SER1_CTS_B */ + 0x0 0x8 0x2 0x0 0x2 0x0 /* ENET1_RX_ER_SER1_CD_B */ + 0x0 0x11 0x2 0x0 0x2 0x0 /* ENET1_CRS */ + 0x0 0x10 0x2 0x0 0x2 0x0>; /* ENET1_COL */ + }; + + pio2: ucc_pin@02 { + pio-map = < + /* port pin dir open_drain assignment has_irq */ + 0x1 0x13 0x1 0x0 0x1 0x0 /* QE_MUX_MDC */ + 0x1 0x14 0x3 0x0 0x1 0x0 /* QE_MUX_MDIO */ + 0x1 0xb 0x2 0x0 0x1 0x0 /* CLK13 */ + 0x1 0x7 0x1 0x0 0x2 0x0 /* ENET5_TXD0_SER5_TXD0 */ + 0x1 0xa 0x1 0x0 0x2 0x0 /* ENET5_TXD1_SER5_TXD1 */ + 0x1 0x6 0x2 0x0 0x2 0x0 /* ENET5_RXD0_SER5_RXD0 */ + 0x1 0x9 0x2 0x0 0x2 0x0 /* ENET5_RXD1_SER5_RXD1 */ + 0x1 0x5 0x1 0x0 0x2 0x0 /* ENET5_TX_EN_SER5_RTS_B */ + 0x1 0x4 0x2 0x0 0x2 0x0 /* ENET5_RX_DV_SER5_CTS_B */ + 0x1 0x8 0x2 0x0 0x2 0x0>; /* ENET5_RX_ER_SER5_CD_B */ + }; + }; + }; + + pci0: pcie@ffe09000 { + reg = <0 0xffe09000 0 0x1000>; + ranges = <0x2000000 0x0 0xa0000000 0 0xa0000000 0x0 0x20000000 + 0x1000000 0x0 0x00000000 0 0xffc10000 0x0 0x10000>; + pcie@0 { + ranges = <0x2000000 0x0 0xa0000000 + 0x2000000 0x0 0xa0000000 + 0x0 0x20000000 + + 0x1000000 0x0 0x0 + 0x1000000 0x0 0x0 + 0x0 0x100000>; + }; + }; + + pci1: pcie@ffe0a000 { + reg = <0 0xffe0a000 0 0x1000>; + ranges = <0x2000000 0x0 0xc0000000 0 0xc0000000 0x0 0x20000000 + 0x1000000 0x0 0x00000000 0 0xffc20000 0x0 0x10000>; + pcie@0 { + ranges = <0x2000000 0x0 0xc0000000 + 0x2000000 0x0 0xc0000000 + 0x0 0x20000000 + + 0x1000000 0x0 0x0 + 0x1000000 0x0 0x0 + 0x0 0x100000>; + }; + }; + + qe: qe@ffe80000 { + ranges = <0x0 0x0 0xffe80000 0x40000>; + reg = <0 0xffe80000 0 0x480>; + brg-frequency = <0>; + bus-frequency = <0>; + status = "disabled"; /* no firmware loaded */ + + enet3: ucc@2000 { + device_type = "network"; + compatible = "ucc_geth"; + local-mac-address = [ 00 00 00 00 00 00 ]; + rx-clock-name = "clk12"; + tx-clock-name = "clk9"; + pio-handle = <&pio1>; + phy-handle = <&qe_phy0>; + phy-connection-type = "mii"; + }; + + mdio@2120 { + qe_phy0: ethernet-phy@0 { + interrupt-parent = <&mpic>; + interrupts = <4 1 0 0>; + reg = <0x0>; + }; + qe_phy1: ethernet-phy@03 { + interrupt-parent = <&mpic>; + interrupts = <5 1 0 0>; + reg = <0x3>; + }; + tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + + enet4: ucc@2400 { + device_type = "network"; + compatible = "ucc_geth"; + local-mac-address = [ 00 00 00 00 00 00 ]; + rx-clock-name = "none"; + tx-clock-name = "clk13"; + pio-handle = <&pio2>; + phy-handle = <&qe_phy1>; + phy-connection-type = "rmii"; + }; + }; +}; + +/include/ "fsl/p1021si-post.dtsi" diff --git a/arch/powerpc/boot/dts/p1021rdb-pc.dtsi b/arch/powerpc/boot/dts/p1021rdb-pc.dtsi new file mode 100644 index 000000000..d6274c58f --- /dev/null +++ b/arch/powerpc/boot/dts/p1021rdb-pc.dtsi @@ -0,0 +1,244 @@ +/* + * P1021 RDB Device Tree Source stub (no addresses or top-level ranges) + * + * Copyright 2012 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +&lbc { + nor@0,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "cfi-flash"; + reg = <0x0 0x0 0x1000000>; + bank-width = <2>; + device-width = <1>; + + partition@0 { + /* This location must not be altered */ + /* 256KB for Vitesse 7385 Switch firmware */ + reg = <0x0 0x00040000>; + label = "NOR Vitesse-7385 Firmware"; + read-only; + }; + + partition@40000 { + /* 256KB for DTB Image */ + reg = <0x00040000 0x00040000>; + label = "NOR DTB Image"; + }; + + partition@80000 { + /* 3.5 MB for Linux Kernel Image */ + reg = <0x00080000 0x00380000>; + label = "NOR Linux Kernel Image"; + }; + + partition@400000 { + /* 10.75MB for JFFS2 based Root file System */ + reg = <0x00400000 0x00ac0000>; + label = "NOR JFFS2 Root File System"; + }; + + partition@ec0000 { + /* This location must not be altered */ + /* 256KB for QE ucode firmware*/ + reg = <0x00ec0000 0x00040000>; + label = "NOR QE microcode firmware"; + read-only; + }; + + partition@f00000 { + /* This location must not be altered */ + /* 512KB for u-boot Bootloader Image */ + /* 512KB for u-boot Environment Variables */ + reg = <0x00f00000 0x00100000>; + label = "NOR U-Boot Image"; + }; + }; + + nand@1,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,p1021-fcm-nand", + "fsl,elbc-fcm-nand"; + reg = <0x1 0x0 0x40000>; + + partition@0 { + /* This location must not be altered */ + /* 1MB for u-boot Bootloader Image */ + reg = <0x0 0x00100000>; + label = "NAND U-Boot Image"; + read-only; + }; + + partition@100000 { + /* 1MB for DTB Image */ + reg = <0x00100000 0x00100000>; + label = "NAND DTB Image"; + }; + + partition@200000 { + /* 4MB for Linux Kernel Image */ + reg = <0x00200000 0x00400000>; + label = "NAND Linux Kernel Image"; + }; + + partition@600000 { + /* 4MB for Compressed Root file System Image */ + reg = <0x00600000 0x00400000>; + label = "NAND Compressed RFS Image"; + }; + + partition@a00000 { + /* 7MB for JFFS2 based Root file System */ + reg = <0x00a00000 0x00700000>; + label = "NAND JFFS2 Root File System"; + }; + + partition@1100000 { + /* 15MB for User Writable Area */ + reg = <0x01100000 0x00f00000>; + label = "NAND Writable User area"; + }; + }; + + L2switch@2,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "vitesse-7385"; + reg = <0x2 0x0 0x20000>; + }; +}; + +&soc { + i2c@3000 { + rtc@68 { + compatible = "pericom,pt7c4338"; + reg = <0x68>; + }; + }; + + spi@7000 { + flash@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "spansion,s25sl12801"; + reg = <0>; + spi-max-frequency = <40000000>; /* input clock */ + + partition@u-boot { + /* 512KB for u-boot Bootloader Image */ + reg = <0x0 0x00080000>; + label = "SPI Flash U-Boot Image"; + read-only; + }; + + partition@dtb { + /* 512KB for DTB Image */ + reg = <0x00080000 0x00080000>; + label = "SPI Flash DTB Image"; + }; + + partition@kernel { + /* 4MB for Linux Kernel Image */ + reg = <0x00100000 0x00400000>; + label = "SPI Flash Linux Kernel Image"; + }; + + partition@fs { + /* 4MB for Compressed RFS Image */ + reg = <0x00500000 0x00400000>; + label = "SPI Flash Compressed RFSImage"; + }; + + partition@jffs-fs { + /* 7MB for JFFS2 based RFS */ + reg = <0x00900000 0x00700000>; + label = "SPI Flash JFFS2 RFS"; + }; + }; + }; + + usb@22000 { + phy_type = "ulpi"; + }; + + mdio@24000 { + phy0: ethernet-phy@0 { + interrupt-parent = <&mpic>; + interrupts = <3 1 0 0>; + reg = <0x0>; + }; + + phy1: ethernet-phy@1 { + interrupt-parent = <&mpic>; + interrupts = <2 1 0 0>; + reg = <0x1>; + }; + + tbi0: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + + mdio@25000 { + tbi1: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + + mdio@26000 { + tbi2: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + + enet0: ethernet@b0000 { + fixed-link = <1 1 1000 0 0>; + phy-connection-type = "rgmii-id"; + + }; + + enet1: ethernet@b1000 { + phy-handle = <&phy0>; + tbi-handle = <&tbi1>; + phy-connection-type = "sgmii"; + }; + + enet2: ethernet@b2000 { + phy-handle = <&phy1>; + tbi-handle = <&tbi2>; + phy-connection-type = "rgmii-id"; + }; +}; diff --git a/arch/powerpc/boot/dts/p1021rdb-pc_32b.dts b/arch/powerpc/boot/dts/p1021rdb-pc_32b.dts new file mode 100644 index 000000000..7cefa12b6 --- /dev/null +++ b/arch/powerpc/boot/dts/p1021rdb-pc_32b.dts @@ -0,0 +1,96 @@ +/* + * P1021 RDB Device Tree Source + * + * Copyright 2012 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor "AS IS" AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +/include/ "fsl/p1021si-pre.dtsi" +/ { + model = "fsl,P1021RDB"; + compatible = "fsl,P1021RDB-PC"; + + memory { + device_type = "memory"; + }; + + lbc: localbus@ffe05000 { + reg = <0 0xffe05000 0 0x1000>; + + /* NOR, NAND Flashes and Vitesse 5 port L2 switch */ + ranges = <0x0 0x0 0x0 0xef000000 0x01000000 + 0x1 0x0 0x0 0xff800000 0x00040000 + 0x2 0x0 0x0 0xffb00000 0x00020000>; + }; + + soc: soc@ffe00000 { + ranges = <0x0 0x0 0xffe00000 0x100000>; + }; + + pci0: pcie@ffe09000 { + ranges = <0x2000000 0x0 0xa0000000 0 0xa0000000 0x0 0x20000000 + 0x1000000 0x0 0x00000000 0 0xffc10000 0x0 0x10000>; + reg = <0 0xffe09000 0 0x1000>; + pcie@0 { + ranges = <0x2000000 0x0 0xa0000000 + 0x2000000 0x0 0xa0000000 + 0x0 0x20000000 + + 0x1000000 0x0 0x0 + 0x1000000 0x0 0x0 + 0x0 0x100000>; + }; + }; + + pci1: pcie@ffe0a000 { + reg = <0 0xffe0a000 0 0x1000>; + ranges = <0x2000000 0x0 0x80000000 0 0x80000000 0x0 0x20000000 + 0x1000000 0x0 0x00000000 0 0xffc00000 0x0 0x10000>; + pcie@0 { + ranges = <0x2000000 0x0 0x80000000 + 0x2000000 0x0 0x80000000 + 0x0 0x20000000 + + 0x1000000 0x0 0x0 + 0x1000000 0x0 0x0 + 0x0 0x100000>; + }; + }; + + qe: qe@ffe80000 { + ranges = <0x0 0x0 0xffe80000 0x40000>; + reg = <0 0xffe80000 0 0x480>; + brg-frequency = <0>; + bus-frequency = <0>; + }; +}; + +/include/ "p1021rdb-pc.dtsi" +/include/ "fsl/p1021si-post.dtsi" diff --git a/arch/powerpc/boot/dts/p1021rdb-pc_36b.dts b/arch/powerpc/boot/dts/p1021rdb-pc_36b.dts new file mode 100644 index 000000000..53d0c8890 --- /dev/null +++ b/arch/powerpc/boot/dts/p1021rdb-pc_36b.dts @@ -0,0 +1,96 @@ +/* + * P1021 RDB Device Tree Source (36-bit address map) + * + * Copyright 2012 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor "AS IS" AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +/include/ "fsl/p1021si-pre.dtsi" +/ { + model = "fsl,P1021RDB"; + compatible = "fsl,P1021RDB-PC"; + + memory { + device_type = "memory"; + }; + + lbc: localbus@fffe05000 { + reg = <0xf 0xffe05000 0 0x1000>; + + /* NOR, NAND Flashes and Vitesse 5 port L2 switch */ + ranges = <0x0 0x0 0xf 0xef000000 0x01000000 + 0x1 0x0 0xf 0xff800000 0x00040000 + 0x2 0x0 0xf 0xffb00000 0x00020000>; + }; + + soc: soc@fffe00000 { + ranges = <0x0 0xf 0xffe00000 0x100000>; + }; + + pci0: pcie@fffe09000 { + ranges = <0x2000000 0x0 0xc0000000 0xc 0x20000000 0x0 0x20000000 + 0x1000000 0x0 0x00000000 0xf 0xffc10000 0x0 0x10000>; + reg = <0xf 0xffe09000 0 0x1000>; + pcie@0 { + ranges = <0x2000000 0x0 0xa0000000 + 0x2000000 0x0 0xa0000000 + 0x0 0x20000000 + + 0x1000000 0x0 0x0 + 0x1000000 0x0 0x0 + 0x0 0x100000>; + }; + }; + + pci1: pcie@fffe0a000 { + reg = <0xf 0xffe0a000 0 0x1000>; + ranges = <0x2000000 0x0 0x80000000 0xc 0x00000000 0x0 0x20000000 + 0x1000000 0x0 0x00000000 0xf 0xffc00000 0x0 0x10000>; + pcie@0 { + ranges = <0x2000000 0x0 0xc0000000 + 0x2000000 0x0 0xc0000000 + 0x0 0x20000000 + + 0x1000000 0x0 0x0 + 0x1000000 0x0 0x0 + 0x0 0x100000>; + }; + }; + + qe: qe@fffe80000 { + ranges = <0x0 0xf 0xffe80000 0x40000>; + reg = <0xf 0xffe80000 0 0x480>; + brg-frequency = <0>; + bus-frequency = <0>; + }; +}; + +/include/ "p1021rdb-pc.dtsi" +/include/ "fsl/p1021si-post.dtsi" diff --git a/arch/powerpc/boot/dts/p1022ds.dtsi b/arch/powerpc/boot/dts/p1022ds.dtsi new file mode 100644 index 000000000..957e0dc1d --- /dev/null +++ b/arch/powerpc/boot/dts/p1022ds.dtsi @@ -0,0 +1,227 @@ +/* + * P1022 DS Device Tree Source stub (no addresses or top-level ranges) + * + * Copyright 2012 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor "AS IS" AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +&board_lbc { + nor@0,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "cfi-flash"; + reg = <0x0 0x0 0x8000000>; + bank-width = <2>; + device-width = <1>; + + partition@0 { + reg = <0x0 0x03000000>; + label = "ramdisk-nor"; + read-only; + }; + + partition@3000000 { + reg = <0x03000000 0x00e00000>; + label = "diagnostic-nor"; + read-only; + }; + + partition@3e00000 { + reg = <0x03e00000 0x00200000>; + label = "dink-nor"; + read-only; + }; + + partition@4000000 { + reg = <0x04000000 0x00400000>; + label = "kernel-nor"; + read-only; + }; + + partition@4400000 { + reg = <0x04400000 0x03b00000>; + label = "jffs2-nor"; + }; + + partition@7f00000 { + reg = <0x07f00000 0x00080000>; + label = "dtb-nor"; + read-only; + }; + + partition@7f80000 { + reg = <0x07f80000 0x00080000>; + label = "u-boot-nor"; + read-only; + }; + }; + + nand@2,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,elbc-fcm-nand"; + reg = <0x2 0x0 0x40000>; + + partition@0 { + reg = <0x0 0x02000000>; + label = "u-boot-nand"; + read-only; + }; + + partition@2000000 { + reg = <0x02000000 0x10000000>; + label = "jffs2-nand"; + }; + + partition@12000000 { + reg = <0x12000000 0x10000000>; + label = "ramdisk-nand"; + read-only; + }; + + partition@22000000 { + reg = <0x22000000 0x04000000>; + label = "kernel-nand"; + }; + + partition@26000000 { + reg = <0x26000000 0x01000000>; + label = "dtb-nand"; + read-only; + }; + + partition@27000000 { + reg = <0x27000000 0x19000000>; + label = "reserved-nand"; + }; + }; + + board-control@3,0 { + compatible = "fsl,p1022ds-fpga", "fsl,fpga-ngpixis"; + reg = <3 0 0x30>; + interrupt-parent = <&mpic>; + /* + * IRQ8 is generated if the "EVENT" switch is pressed + * and PX_CTL[EVESEL] is set to 00. + */ + interrupts = <8 0 0 0>; + }; +}; + +&board_soc { + i2c@3100 { + wm8776:codec@1a { + compatible = "wlf,wm8776"; + reg = <0x1a>; + /* + * clock-frequency will be set by U-Boot if + * the clock is enabled. + */ + }; + rtc@68 { + compatible = "dallas,ds3232"; + reg = <0x68>; + interrupts = <0x1 0x1 0 0>; + }; + adt7461@4c { + compatible = "adi,adt7461"; + reg = <0x4c>; + }; + }; + + spi@7000 { + flash@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "spansion,s25sl12801"; + reg = <0>; + spi-max-frequency = <40000000>; /* input clock */ + + partition@0 { + label = "u-boot-spi"; + reg = <0x00000000 0x00100000>; + read-only; + }; + partition@100000 { + label = "kernel-spi"; + reg = <0x00100000 0x00500000>; + read-only; + }; + partition@600000 { + label = "dtb-spi"; + reg = <0x00600000 0x00100000>; + read-only; + }; + partition@700000 { + label = "file system-spi"; + reg = <0x00700000 0x00900000>; + }; + }; + }; + + ssi@15000 { + fsl,mode = "i2s-slave"; + codec-handle = <&wm8776>; + fsl,ssi-asynchronous; + }; + + usb@22000 { + phy_type = "ulpi"; + }; + + usb@23000 { + status = "disabled"; + }; + + mdio@24000 { + phy0: ethernet-phy@0 { + interrupts = <3 1 0 0>; + reg = <0x1>; + }; + phy1: ethernet-phy@1 { + interrupts = <9 1 0 0>; + reg = <0x2>; + }; + tbi-phy@2 { + device_type = "tbi-phy"; + reg = <0x2>; + }; + }; + + ethernet@b0000 { + phy-handle = <&phy0>; + phy-connection-type = "rgmii-id"; + }; + + ethernet@b1000 { + phy-handle = <&phy1>; + phy-connection-type = "rgmii-id"; + }; +}; diff --git a/arch/powerpc/boot/dts/p1022ds_32b.dts b/arch/powerpc/boot/dts/p1022ds_32b.dts new file mode 100644 index 000000000..d96cae00a --- /dev/null +++ b/arch/powerpc/boot/dts/p1022ds_32b.dts @@ -0,0 +1,103 @@ +/* + * P1022 DS 32-bit Physical Address Map Device Tree Source + * + * Copyright 2012 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor "AS IS" AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +/include/ "fsl/p1022si-pre.dtsi" +/ { + model = "fsl,P1022DS"; + compatible = "fsl,P1022DS"; + + memory { + device_type = "memory"; + }; + + board_lbc: lbc: localbus@ffe05000 { + ranges = <0x0 0x0 0x0 0xe8000000 0x08000000 + 0x1 0x0 0x0 0xe0000000 0x08000000 + 0x2 0x0 0x0 0xff800000 0x00040000 + 0x3 0x0 0x0 0xffdf0000 0x00008000>; + reg = <0x0 0xffe05000 0 0x1000>; + }; + + board_soc: soc: soc@ffe00000 { + ranges = <0x0 0x0 0xffe00000 0x100000>; + }; + + pci0: pcie@ffe09000 { + ranges = <0x2000000 0x0 0xe0000000 0 0xa0000000 0x0 0x20000000 + 0x1000000 0x0 0x00000000 0 0xffc10000 0x0 0x10000>; + reg = <0x0 0xffe09000 0 0x1000>; + pcie@0 { + ranges = <0x2000000 0x0 0xe0000000 + 0x2000000 0x0 0xe0000000 + 0x0 0x20000000 + + 0x1000000 0x0 0x0 + 0x1000000 0x0 0x0 + 0x0 0x100000>; + }; + }; + + pci1: pcie@ffe0a000 { + ranges = <0x2000000 0x0 0xe0000000 0 0xc0000000 0x0 0x20000000 + 0x1000000 0x0 0x00000000 0 0xffc20000 0x0 0x10000>; + reg = <0 0xffe0a000 0 0x1000>; + pcie@0 { + ranges = <0x2000000 0x0 0xe0000000 + 0x2000000 0x0 0xe0000000 + 0x0 0x20000000 + + 0x1000000 0x0 0x0 + 0x1000000 0x0 0x0 + 0x0 0x100000>; + }; + }; + + pci2: pcie@ffe0b000 { + ranges = <0x2000000 0x0 0xe0000000 0 0x80000000 0x0 0x20000000 + 0x1000000 0x0 0x00000000 0 0xffc00000 0x0 0x10000>; + reg = <0 0xffe0b000 0 0x1000>; + pcie@0 { + ranges = <0x2000000 0x0 0xe0000000 + 0x2000000 0x0 0xe0000000 + 0x0 0x20000000 + + 0x1000000 0x0 0x0 + 0x1000000 0x0 0x0 + 0x0 0x100000>; + }; + }; +}; + +/include/ "fsl/p1022si-post.dtsi" +/include/ "p1022ds.dtsi" diff --git a/arch/powerpc/boot/dts/p1022ds_36b.dts b/arch/powerpc/boot/dts/p1022ds_36b.dts new file mode 100644 index 000000000..f7aacce40 --- /dev/null +++ b/arch/powerpc/boot/dts/p1022ds_36b.dts @@ -0,0 +1,103 @@ +/* + * P1022 DS 36-bit Physical Address Map Device Tree Source + * + * Copyright 2012 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor "AS IS" AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +/include/ "fsl/p1022si-pre.dtsi" +/ { + model = "fsl,P1022DS"; + compatible = "fsl,P1022DS"; + + memory { + device_type = "memory"; + }; + + board_lbc: lbc: localbus@fffe05000 { + ranges = <0x0 0x0 0xf 0xe8000000 0x08000000 + 0x1 0x0 0xf 0xe0000000 0x08000000 + 0x2 0x0 0xf 0xff800000 0x00040000 + 0x3 0x0 0xf 0xffdf0000 0x00008000>; + reg = <0xf 0xffe05000 0 0x1000>; + }; + + board_soc: soc: soc@fffe00000 { + ranges = <0x0 0xf 0xffe00000 0x100000>; + }; + + pci0: pcie@fffe09000 { + ranges = <0x2000000 0x0 0xe0000000 0xc 0x20000000 0x0 0x20000000 + 0x1000000 0x0 0x00000000 0xf 0xffc10000 0x0 0x10000>; + reg = <0xf 0xffe09000 0 0x1000>; + pcie@0 { + ranges = <0x2000000 0x0 0xe0000000 + 0x2000000 0x0 0xe0000000 + 0x0 0x20000000 + + 0x1000000 0x0 0x0 + 0x1000000 0x0 0x0 + 0x0 0x100000>; + }; + }; + + pci1: pcie@fffe0a000 { + ranges = <0x2000000 0x0 0xe0000000 0xc 0x40000000 0x0 0x20000000 + 0x1000000 0x0 0x00000000 0xf 0xffc20000 0x0 0x10000>; + reg = <0xf 0xffe0a000 0 0x1000>; + pcie@0 { + ranges = <0x2000000 0x0 0xe0000000 + 0x2000000 0x0 0xe0000000 + 0x0 0x20000000 + + 0x1000000 0x0 0x0 + 0x1000000 0x0 0x0 + 0x0 0x100000>; + }; + }; + + pci2: pcie@fffe0b000 { + ranges = <0x2000000 0x0 0xe0000000 0xc 0x00000000 0x0 0x20000000 + 0x1000000 0x0 0x00000000 0xf 0xffc00000 0x0 0x10000>; + reg = <0xf 0xffe0b000 0 0x1000>; + pcie@0 { + ranges = <0x2000000 0x0 0xe0000000 + 0x2000000 0x0 0xe0000000 + 0x0 0x20000000 + + 0x1000000 0x0 0x0 + 0x1000000 0x0 0x0 + 0x0 0x100000>; + }; + }; +}; + +/include/ "fsl/p1022si-post.dtsi" +/include/ "p1022ds.dtsi" diff --git a/arch/powerpc/boot/dts/p1022rdk.dts b/arch/powerpc/boot/dts/p1022rdk.dts new file mode 100644 index 000000000..51d82de22 --- /dev/null +++ b/arch/powerpc/boot/dts/p1022rdk.dts @@ -0,0 +1,188 @@ +/* + * P1022 RDK 32-bit Physical Address Map Device Tree Source + * + * Copyright 2012 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor "AS IS" AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +/include/ "fsl/p1022si-pre.dtsi" +/ { + model = "fsl,P1022RDK"; + compatible = "fsl,P1022RDK"; + + memory { + device_type = "memory"; + }; + + board_lbc: lbc: localbus@ffe05000 { + /* The P1022 RDK does not have any localbus devices */ + status = "disabled"; + }; + + board_soc: soc: soc@ffe00000 { + ranges = <0x0 0x0 0xffe00000 0x100000>; + + i2c@3100 { + wm8960:codec@1a { + compatible = "wlf,wm8960"; + reg = <0x1a>; + /* MCLK source is a stand-alone oscillator */ + clock-frequency = <12288000>; + }; + rtc@68 { + compatible = "stm,m41t62"; + reg = <0x68>; + }; + adt7461@4c{ + compatible = "adi,adt7461"; + reg = <0x4c>; + }; + zl6100@21{ + compatible = "isil,zl6100"; + reg = <0x21>; + }; + zl6100@24{ + compatible = "isil,zl6100"; + reg = <0x24>; + }; + zl6100@26{ + compatible = "isil,zl6100"; + reg = <0x26>; + }; + zl6100@29{ + compatible = "isil,zl6100"; + reg = <0x29>; + }; + }; + + spi@7000 { + flash@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "spansion,m25p80"; + reg = <0>; + spi-max-frequency = <1000000>; + partition@0 { + label = "full-spi-flash"; + reg = <0x00000000 0x00100000>; + }; + }; + }; + + ssi@15000 { + fsl,mode = "i2s-slave"; + codec-handle = <&wm8960>; + }; + + usb@22000 { + phy_type = "ulpi"; + }; + + usb@23000 { + phy_type = "ulpi"; + }; + + mdio@24000 { + phy0: ethernet-phy@0 { + interrupts = <3 1 0 0>; + reg = <0x1>; + }; + phy1: ethernet-phy@1 { + interrupts = <9 1 0 0>; + reg = <0x2>; + }; + }; + + mdio@25000 { + tbi0: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + + ethernet@b0000 { + phy-handle = <&phy0>; + phy-connection-type = "rgmii-id"; + }; + + ethernet@b1000 { + phy-handle = <&phy1>; + tbi-handle = <&tbi0>; + phy-connection-type = "sgmii"; + }; + }; + + pci0: pcie@ffe09000 { + ranges = <0x2000000 0x0 0xe0000000 0 0xa0000000 0x0 0x20000000 + 0x1000000 0x0 0x00000000 0 0xffc10000 0x0 0x10000>; + reg = <0x0 0xffe09000 0 0x1000>; + pcie@0 { + ranges = <0x2000000 0x0 0xe0000000 + 0x2000000 0x0 0xe0000000 + 0x0 0x20000000 + + 0x1000000 0x0 0x0 + 0x1000000 0x0 0x0 + 0x0 0x100000>; + }; + }; + + pci1: pcie@ffe0a000 { + ranges = <0x2000000 0x0 0xe0000000 0 0xc0000000 0x0 0x20000000 + 0x1000000 0x0 0x00000000 0 0xffc20000 0x0 0x10000>; + reg = <0 0xffe0a000 0 0x1000>; + pcie@0 { + ranges = <0x2000000 0x0 0xe0000000 + 0x2000000 0x0 0xe0000000 + 0x0 0x20000000 + + 0x1000000 0x0 0x0 + 0x1000000 0x0 0x0 + 0x0 0x100000>; + }; + }; + + pci2: pcie@ffe0b000 { + ranges = <0x2000000 0x0 0xe0000000 0 0x80000000 0x0 0x20000000 + 0x1000000 0x0 0x00000000 0 0xffc00000 0x0 0x10000>; + reg = <0 0xffe0b000 0 0x1000>; + pcie@0 { + ranges = <0x2000000 0x0 0xe0000000 + 0x2000000 0x0 0xe0000000 + 0x0 0x20000000 + + 0x1000000 0x0 0x0 + 0x1000000 0x0 0x0 + 0x0 0x100000>; + }; + }; +}; + +/include/ "fsl/p1022si-post.dtsi" diff --git a/arch/powerpc/boot/dts/p1023rdb.dts b/arch/powerpc/boot/dts/p1023rdb.dts new file mode 100644 index 000000000..9236e3742 --- /dev/null +++ b/arch/powerpc/boot/dts/p1023rdb.dts @@ -0,0 +1,248 @@ +/* + * P1023 RDB Device Tree Source + * + * Copyright 2013 - 2014 Freescale Semiconductor Inc. + * + * Author: Chunhe Lan <Chunhe.Lan@freescale.com> + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +/include/ "fsl/p1023si-pre.dtsi" + +/ { + model = "fsl,P1023"; + compatible = "fsl,P1023RDB"; + #address-cells = <2>; + #size-cells = <2>; + interrupt-parent = <&mpic>; + + memory { + device_type = "memory"; + }; + + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + bman_fbpr: bman-fbpr { + size = <0 0x1000000>; + alignment = <0 0x1000000>; + }; + }; + + bportals: bman-portals@ff200000 { + ranges = <0x0 0xf 0xff200000 0x200000>; + }; + + soc: soc@ff600000 { + ranges = <0x0 0x0 0xff600000 0x200000>; + + i2c@3000 { + eeprom@53 { + compatible = "at24,24c04"; + reg = <0x53>; + }; + + rtc@6f { + compatible = "microchip,mcp7941x"; + reg = <0x6f>; + }; + }; + + usb@22000 { + dr_mode = "host"; + phy_type = "ulpi"; + }; + }; + + lbc: localbus@ff605000 { + reg = <0 0xff605000 0 0x1000>; + + /* NOR, NAND Flashes */ + ranges = <0x0 0x0 0x0 0xec000000 0x04000000 + 0x1 0x0 0x0 0xffa00000 0x08000000>; + + nor@0,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "cfi-flash"; + reg = <0x0 0x0 0x04000000>; + bank-width = <2>; + device-width = <1>; + + partition@0 { + /* 48MB for Root File System */ + reg = <0x00000000 0x03000000>; + label = "NOR Root File System"; + }; + + partition@3000000 { + /* 1MB for DTB Image */ + reg = <0x03000000 0x00100000>; + label = "NOR DTB Image"; + }; + + partition@3100000 { + /* 14MB for Linux Kernel Image */ + reg = <0x03100000 0x00e00000>; + label = "NOR Linux Kernel Image"; + }; + + partition@3f00000 { + /* This location must not be altered */ + /* 512KB for u-boot Bootloader Image */ + /* 512KB for u-boot Environment Variables */ + reg = <0x03f00000 0x00100000>; + label = "NOR U-Boot Image"; + read-only; + }; + }; + + nand@1,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,elbc-fcm-nand"; + reg = <0x1 0x0 0x40000>; + + partition@0 { + /* This location must not be altered */ + /* 1MB for u-boot Bootloader Image */ + reg = <0x0 0x00100000>; + label = "NAND U-Boot Image"; + read-only; + }; + + partition@100000 { + /* 1MB for DTB Image */ + reg = <0x00100000 0x00100000>; + label = "NAND DTB Image"; + }; + + partition@200000 { + /* 14MB for Linux Kernel Image */ + reg = <0x00200000 0x00e00000>; + label = "NAND Linux Kernel Image"; + }; + + partition@1000000 { + /* 96MB for Root File System Image */ + reg = <0x01000000 0x06000000>; + label = "NAND Root File System"; + }; + + partition@7000000 { + /* 16MB for User Writable Area */ + reg = <0x07000000 0x01000000>; + label = "NAND Writable User area"; + }; + }; + }; + + pci0: pcie@ff60a000 { + reg = <0 0xff60a000 0 0x1000>; + ranges = <0x2000000 0x0 0xc0000000 0 0xc0000000 0x0 0x20000000 + 0x1000000 0x0 0x00000000 0 0xffc20000 0x0 0x10000>; + pcie@0 { + /* IRQ[0:3] are pulled up on board, set to active-low */ + interrupt-map-mask = <0xf800 0 0 7>; + interrupt-map = < + /* IDSEL 0x0 */ + 0000 0 0 1 &mpic 0 1 0 0 + 0000 0 0 2 &mpic 1 1 0 0 + 0000 0 0 3 &mpic 2 1 0 0 + 0000 0 0 4 &mpic 3 1 0 0 + >; + ranges = <0x2000000 0x0 0xc0000000 + 0x2000000 0x0 0xc0000000 + 0x0 0x20000000 + + 0x1000000 0x0 0x0 + 0x1000000 0x0 0x0 + 0x0 0x100000>; + }; + }; + + board_pci1: pci1: pcie@ff609000 { + reg = <0 0xff609000 0 0x1000>; + ranges = <0x2000000 0x0 0xa0000000 0 0xa0000000 0x0 0x20000000 + 0x1000000 0x0 0x00000000 0 0xffc10000 0x0 0x10000>; + pcie@0 { + /* + * IRQ[4:6] only for PCIe, set to active-high, + * IRQ[7] is pulled up on board, set to active-low + */ + interrupt-map-mask = <0xf800 0 0 7>; + interrupt-map = < + /* IDSEL 0x0 */ + 0000 0 0 1 &mpic 4 2 0 0 + 0000 0 0 2 &mpic 5 2 0 0 + 0000 0 0 3 &mpic 6 2 0 0 + 0000 0 0 4 &mpic 7 1 0 0 + >; + ranges = <0x2000000 0x0 0xa0000000 + 0x2000000 0x0 0xa0000000 + 0x0 0x20000000 + + 0x1000000 0x0 0x0 + 0x1000000 0x0 0x0 + 0x0 0x100000>; + }; + }; + + pci2: pcie@ff60b000 { + reg = <0 0xff60b000 0 0x1000>; + ranges = <0x2000000 0x0 0x80000000 0 0x80000000 0x0 0x20000000 + 0x1000000 0x0 0x00000000 0 0xffc00000 0x0 0x10000>; + pcie@0 { + /* + * IRQ[8:10] are pulled up on board, set to active-low + * IRQ[11] only for PCIe, set to active-high, + */ + interrupt-map-mask = <0xf800 0 0 7>; + interrupt-map = < + /* IDSEL 0x0 */ + 0000 0 0 1 &mpic 8 1 0 0 + 0000 0 0 2 &mpic 9 1 0 0 + 0000 0 0 3 &mpic 10 1 0 0 + 0000 0 0 4 &mpic 11 2 0 0 + >; + ranges = <0x2000000 0x0 0x80000000 + 0x2000000 0x0 0x80000000 + 0x0 0x20000000 + + 0x1000000 0x0 0x0 + 0x1000000 0x0 0x0 + 0x0 0x100000>; + }; + }; +}; + +/include/ "fsl/p1023si-post.dtsi" diff --git a/arch/powerpc/boot/dts/p1024rdb.dtsi b/arch/powerpc/boot/dts/p1024rdb.dtsi new file mode 100644 index 000000000..b05dcb40f --- /dev/null +++ b/arch/powerpc/boot/dts/p1024rdb.dtsi @@ -0,0 +1,228 @@ +/* + * P1024 RDB Device Tree Source stub (no addresses or top-level ranges) + * + * Copyright 2012 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +&lbc { + nor@0,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "cfi-flash"; + reg = <0x0 0x0 0x1000000>; + bank-width = <2>; + device-width = <1>; + + partition@0 { + /* This location must not be altered */ + /* 256KB for Vitesse 7385 Switch firmware */ + reg = <0x0 0x00040000>; + label = "NOR Vitesse-7385 Firmware"; + read-only; + }; + + partition@40000 { + /* 256KB for DTB Image */ + reg = <0x00040000 0x00040000>; + label = "NOR DTB Image"; + }; + + partition@80000 { + /* 3.5 MB for Linux Kernel Image */ + reg = <0x00080000 0x00380000>; + label = "NOR Linux Kernel Image"; + }; + + partition@400000 { + /* 11MB for JFFS2 based Root file System */ + reg = <0x00400000 0x00b00000>; + label = "NOR JFFS2 Root File System"; + }; + + partition@f00000 { + /* This location must not be altered */ + /* 512KB for u-boot Bootloader Image */ + /* 512KB for u-boot Environment Variables */ + reg = <0x00f00000 0x00100000>; + label = "NOR U-Boot Image"; + read-only; + }; + }; + + nand@1,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,p1020-fcm-nand", + "fsl,elbc-fcm-nand"; + reg = <0x1 0x0 0x40000>; + + partition@0 { + /* This location must not be altered */ + /* 1MB for u-boot Bootloader Image */ + reg = <0x0 0x00100000>; + label = "NAND U-Boot Image"; + read-only; + }; + + partition@100000 { + /* 1MB for DTB Image */ + reg = <0x00100000 0x00100000>; + label = "NAND DTB Image"; + }; + + partition@200000 { + /* 4MB for Linux Kernel Image */ + reg = <0x00200000 0x00400000>; + label = "NAND Linux Kernel Image"; + }; + + partition@600000 { + /* 4MB for Compressed Root file System Image */ + reg = <0x00600000 0x00400000>; + label = "NAND Compressed RFS Image"; + }; + + partition@a00000 { + /* 15MB for JFFS2 based Root file System */ + reg = <0x00a00000 0x00f00000>; + label = "NAND JFFS2 Root File System"; + }; + + partition@1900000 { + /* 7MB for User Writable Area */ + reg = <0x01900000 0x00700000>; + label = "NAND Writable User area"; + }; + }; +}; + +&soc { + spi@7000 { + flash@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "spansion,m25p80"; + reg = <0>; + spi-max-frequency = <40000000>; + + partition@0 { + /* 512KB for u-boot Bootloader Image */ + reg = <0x0 0x00080000>; + label = "SPI U-Boot Image"; + read-only; + }; + + partition@80000 { + /* 512KB for DTB Image */ + reg = <0x00080000 0x00080000>; + label = "SPI DTB Image"; + }; + + partition@100000 { + /* 4MB for Linux Kernel Image */ + reg = <0x00100000 0x00400000>; + label = "SPI Linux Kernel Image"; + }; + + partition@500000 { + /* 4MB for Compressed RFS Image */ + reg = <0x00500000 0x00400000>; + label = "SPI Compressed RFS Image"; + }; + + partition@900000 { + /* 7MB for JFFS2 based RFS */ + reg = <0x00900000 0x00700000>; + label = "SPI JFFS2 RFS"; + }; + }; + }; + + i2c@3000 { + rtc@68 { + compatible = "dallas,ds1339"; + reg = <0x68>; + }; + }; + + usb@22000 { + phy_type = "ulpi"; + }; + + usb@23000 { + status = "disabled"; + }; + + mdio@24000 { + phy0: ethernet-phy@0 { + interrupts = <3 1 0 0>; + reg = <0x0>; + }; + phy1: ethernet-phy@1 { + interrupts = <2 1 0 0>; + reg = <0x1>; + }; + phy2: ethernet-phy@2 { + interrupts = <1 1 0 0>; + reg = <0x2>; + }; + }; + + mdio@25000 { + tbi0: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + + mdio@26000 { + tbi1: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + + ethernet@b0000 { + phy-handle = <&phy2>; + phy-connection-type = "rgmii-id"; + }; + + ethernet@b1000 { + phy-handle = <&phy0>; + tbi-handle = <&tbi0>; + phy-connection-type = "sgmii"; + }; + + ethernet@b2000 { + phy-handle = <&phy1>; + phy-connection-type = "rgmii-id"; + }; +}; diff --git a/arch/powerpc/boot/dts/p1024rdb_32b.dts b/arch/powerpc/boot/dts/p1024rdb_32b.dts new file mode 100644 index 000000000..90e803e9b --- /dev/null +++ b/arch/powerpc/boot/dts/p1024rdb_32b.dts @@ -0,0 +1,87 @@ +/* + * P1024 RDB 32Bit Physical Address Map Device Tree Source + * + * Copyright 2012 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +/include/ "fsl/p1020si-pre.dtsi" +/ { + model = "fsl,P1024RDB"; + compatible = "fsl,P1024RDB"; + + memory { + device_type = "memory"; + }; + + lbc: localbus@ffe05000 { + reg = <0x0 0xffe05000 0 0x1000>; + ranges = <0x0 0x0 0x0 0xef000000 0x01000000 + 0x1 0x0 0x0 0xff800000 0x00040000>; + }; + + soc: soc@ffe00000 { + ranges = <0x0 0x0 0xffe00000 0x100000>; + }; + + pci0: pcie@ffe09000 { + reg = <0x0 0xffe09000 0 0x1000>; + ranges = <0x2000000 0x0 0xe0000000 0x0 0xa0000000 0x0 0x20000000 + 0x1000000 0x0 0x00000000 0x0 0xffc10000 0x0 0x10000>; + pcie@0 { + ranges = <0x2000000 0x0 0xe0000000 + 0x2000000 0x0 0xe0000000 + 0x0 0x20000000 + + 0x1000000 0x0 0x0 + 0x1000000 0x0 0x0 + 0x0 0x100000>; + }; + }; + + pci1: pcie@ffe0a000 { + reg = <0x0 0xffe0a000 0 0x1000>; + ranges = <0x2000000 0x0 0xe0000000 0x0 0x80000000 0x0 0x20000000 + 0x1000000 0x0 0x00000000 0x0 0xffc00000 0x0 0x10000>; + pcie@0 { + reg = <0x0 0x0 0x0 0x0 0x0>; + ranges = <0x2000000 0x0 0xe0000000 + 0x2000000 0x0 0xe0000000 + 0x0 0x20000000 + + 0x1000000 0x0 0x0 + 0x1000000 0x0 0x0 + 0x0 0x100000>; + }; + }; +}; + +/include/ "p1024rdb.dtsi" +/include/ "fsl/p1020si-post.dtsi" diff --git a/arch/powerpc/boot/dts/p1024rdb_36b.dts b/arch/powerpc/boot/dts/p1024rdb_36b.dts new file mode 100644 index 000000000..3656825b6 --- /dev/null +++ b/arch/powerpc/boot/dts/p1024rdb_36b.dts @@ -0,0 +1,87 @@ +/* + * P1024 RDB 36Bit Physical Address Map Device Tree Source + * + * Copyright 2012 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +/include/ "fsl/p1020si-pre.dtsi" +/ { + model = "fsl,P1024RDB"; + compatible = "fsl,P1024RDB"; + + memory { + device_type = "memory"; + }; + + lbc: localbus@fffe05000 { + reg = <0xf 0xffe05000 0 0x1000>; + ranges = <0x0 0x0 0xf 0xef000000 0x01000000 + 0x1 0x0 0xf 0xff800000 0x00040000>; + }; + + soc: soc@fffe00000 { + ranges = <0x0 0xf 0xffe00000 0x100000>; + }; + + pci0: pcie@fffe09000 { + reg = <0xf 0xffe09000 0 0x1000>; + ranges = <0x2000000 0x0 0xe0000000 0xc 0x20000000 0x0 0x20000000 + 0x1000000 0x0 0x00000000 0xf 0xffc10000 0x0 0x10000>; + pcie@0 { + ranges = <0x2000000 0x0 0xe0000000 + 0x2000000 0x0 0xe0000000 + 0x0 0x20000000 + + 0x1000000 0x0 0x0 + 0x1000000 0x0 0x0 + 0x0 0x100000>; + }; + }; + + pci1: pcie@fffe0a000 { + reg = <0xf 0xffe0a000 0 0x1000>; + ranges = <0x2000000 0x0 0xe0000000 0xc 0x00000000 0x0 0x20000000 + 0x1000000 0x0 0x00000000 0xf 0xffc00000 0x0 0x10000>; + pcie@0 { + reg = <0x0 0x0 0x0 0x0 0x0>; + ranges = <0x2000000 0x0 0xe0000000 + 0x2000000 0x0 0xe0000000 + 0x0 0x20000000 + + 0x1000000 0x0 0x0 + 0x1000000 0x0 0x0 + 0x0 0x100000>; + }; + }; +}; + +/include/ "p1024rdb.dtsi" +/include/ "fsl/p1020si-post.dtsi" diff --git a/arch/powerpc/boot/dts/p1025rdb.dtsi b/arch/powerpc/boot/dts/p1025rdb.dtsi new file mode 100644 index 000000000..f50256482 --- /dev/null +++ b/arch/powerpc/boot/dts/p1025rdb.dtsi @@ -0,0 +1,326 @@ +/* + * P1025 RDB Device Tree Source stub (no addresses or top-level ranges) + * + * Copyright 2011 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +&lbc { + nor@0,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "cfi-flash"; + reg = <0x0 0x0 0x1000000>; + bank-width = <2>; + device-width = <1>; + + partition@0 { + /* This location must not be altered */ + /* 256KB for Vitesse 7385 Switch firmware */ + reg = <0x0 0x00040000>; + label = "NOR Vitesse-7385 Firmware"; + read-only; + }; + + partition@40000 { + /* 256KB for DTB Image */ + reg = <0x00040000 0x00040000>; + label = "NOR DTB Image"; + }; + + partition@80000 { + /* 3.5 MB for Linux Kernel Image */ + reg = <0x00080000 0x00380000>; + label = "NOR Linux Kernel Image"; + }; + + partition@400000 { + /* 11MB for JFFS2 based Root file System */ + reg = <0x00400000 0x00b00000>; + label = "NOR JFFS2 Root File System"; + }; + + partition@f00000 { + /* This location must not be altered */ + /* 512KB for u-boot Bootloader Image */ + /* 512KB for u-boot Environment Variables */ + reg = <0x00f00000 0x00100000>; + label = "NOR U-Boot Image"; + read-only; + }; + }; + + nand@1,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,p1025-fcm-nand", + "fsl,elbc-fcm-nand"; + reg = <0x1 0x0 0x40000>; + + partition@0 { + /* This location must not be altered */ + /* 1MB for u-boot Bootloader Image */ + reg = <0x0 0x00100000>; + label = "NAND U-Boot Image"; + read-only; + }; + + partition@100000 { + /* 1MB for DTB Image */ + reg = <0x00100000 0x00100000>; + label = "NAND DTB Image"; + }; + + partition@200000 { + /* 4MB for Linux Kernel Image */ + reg = <0x00200000 0x00400000>; + label = "NAND Linux Kernel Image"; + }; + + partition@600000 { + /* 4MB for Compressed Root file System Image */ + reg = <0x00600000 0x00400000>; + label = "NAND Compressed RFS Image"; + }; + + partition@a00000 { + /* 7MB for JFFS2 based Root file System */ + reg = <0x00a00000 0x00700000>; + label = "NAND JFFS2 Root File System"; + }; + + partition@1100000 { + /* 15MB for JFFS2 based Root file System */ + reg = <0x01100000 0x00f00000>; + label = "NAND Writable User area"; + }; + }; + +}; + +&soc { + i2c@3000 { + rtc@68 { + compatible = "dallas,ds1339"; + reg = <0x68>; + }; + }; + + spi@7000 { + flash@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "spansion,s25sl12801"; + reg = <0>; + spi-max-frequency = <40000000>; /* input clock */ + + partition@u-boot { + /* 512KB for u-boot Bootloader Image */ + reg = <0x0 0x00080000>; + label = "u-boot"; + read-only; + }; + + partition@dtb { + /* 512KB for DTB Image */ + reg = <0x00080000 0x00080000>; + label = "dtb"; + }; + + partition@kernel { + /* 4MB for Linux Kernel Image */ + reg = <0x00100000 0x00400000>; + label = "kernel"; + }; + + partition@fs { + /* 4MB for Compressed RFS Image */ + reg = <0x00500000 0x00400000>; + label = "file system"; + }; + + partition@jffs-fs { + /* 7MB for JFFS2 based RFS */ + reg = <0x00900000 0x00700000>; + label = "file system jffs2"; + }; + }; + }; + + usb@22000 { + phy_type = "ulpi"; + }; + + /* USB2 is shared with localbus, so it must be disabled + by default. We can't put 'status = "disabled";' here + since U-Boot doesn't clear the status property when + it enables USB2. OTOH, U-Boot does create a new node + when there isn't any. So, just comment it out. + usb@23000 { + phy_type = "ulpi"; + }; + */ + + mdio@24000 { + phy0: ethernet-phy@0 { + interrupt-parent = <&mpic>; + interrupts = <3 1>; + reg = <0x0>; + }; + + phy1: ethernet-phy@1 { + interrupt-parent = <&mpic>; + interrupts = <2 1>; + reg = <0x1>; + }; + + tbi0: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + + mdio@25000 { + tbi1: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + + mdio@26000 { + tbi2: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + + enet0: ethernet@b0000 { + fixed-link = <1 1 1000 0 0>; + phy-connection-type = "rgmii-id"; + + }; + + enet1: ethernet@b1000 { + phy-handle = <&phy0>; + tbi-handle = <&tbi1>; + phy-connection-type = "sgmii"; + }; + + enet2: ethernet@b2000 { + phy-handle = <&phy1>; + phy-connection-type = "rgmii-id"; + }; + + par_io@e0100 { + #address-cells = <1>; + #size-cells = <1>; + reg = <0xe0100 0x60>; + ranges = <0x0 0xe0100 0x60>; + device_type = "par_io"; + num-ports = <3>; + pio1: ucc_pin@01 { + pio-map = < + /* port pin dir open_drain assignment has_irq */ + 0x1 0x13 0x1 0x0 0x1 0x0 /* QE_MUX_MDC */ + 0x1 0x14 0x3 0x0 0x1 0x0 /* QE_MUX_MDIO */ + 0x0 0x17 0x2 0x0 0x2 0x0 /* CLK12 */ + 0x0 0x18 0x2 0x0 0x1 0x0 /* CLK9 */ + 0x0 0x7 0x1 0x0 0x2 0x0 /* ENET1_TXD0_SER1_TXD0 */ + 0x0 0x9 0x1 0x0 0x2 0x0 /* ENET1_TXD1_SER1_TXD1 */ + 0x0 0xb 0x1 0x0 0x2 0x0 /* ENET1_TXD2_SER1_TXD2 */ + 0x0 0xc 0x1 0x0 0x2 0x0 /* ENET1_TXD3_SER1_TXD3 */ + 0x0 0x6 0x2 0x0 0x2 0x0 /* ENET1_RXD0_SER1_RXD0 */ + 0x0 0xa 0x2 0x0 0x2 0x0 /* ENET1_RXD1_SER1_RXD1 */ + 0x0 0xe 0x2 0x0 0x2 0x0 /* ENET1_RXD2_SER1_RXD2 */ + 0x0 0xf 0x2 0x0 0x2 0x0 /* ENET1_RXD3_SER1_RXD3 */ + 0x0 0x5 0x1 0x0 0x2 0x0 /* ENET1_TX_EN_SER1_RTS_B */ + 0x0 0xd 0x1 0x0 0x2 0x0 /* ENET1_TX_ER */ + 0x0 0x4 0x2 0x0 0x2 0x0 /* ENET1_RX_DV_SER1_CTS_B */ + 0x0 0x8 0x2 0x0 0x2 0x0 /* ENET1_RX_ER_SER1_CD_B */ + 0x0 0x11 0x2 0x0 0x2 0x0 /* ENET1_CRS */ + 0x0 0x10 0x2 0x0 0x2 0x0>; /* ENET1_COL */ + }; + + pio2: ucc_pin@02 { + pio-map = < + /* port pin dir open_drain assignment has_irq */ + 0x1 0x13 0x1 0x0 0x1 0x0 /* QE_MUX_MDC */ + 0x1 0x14 0x3 0x0 0x1 0x0 /* QE_MUX_MDIO */ + 0x1 0xb 0x2 0x0 0x1 0x0 /* CLK13 */ + 0x1 0x7 0x1 0x0 0x2 0x0 /* ENET5_TXD0_SER5_TXD0 */ + 0x1 0xa 0x1 0x0 0x2 0x0 /* ENET5_TXD1_SER5_TXD1 */ + 0x1 0x6 0x2 0x0 0x2 0x0 /* ENET5_RXD0_SER5_RXD0 */ + 0x1 0x9 0x2 0x0 0x2 0x0 /* ENET5_RXD1_SER5_RXD1 */ + 0x1 0x5 0x1 0x0 0x2 0x0 /* ENET5_TX_EN_SER5_RTS_B */ + 0x1 0x4 0x2 0x0 0x2 0x0 /* ENET5_RX_DV_SER5_CTS_B */ + 0x1 0x8 0x2 0x0 0x2 0x0>; /* ENET5_RX_ER_SER5_CD_B */ + }; + + pio3: ucc_pin@03 { + pio-map = < + /* port pin dir open_drain assignment has_irq */ + 0x0 0x16 0x2 0x0 0x2 0x0 /* SER7_CD_B*/ + 0x0 0x12 0x2 0x0 0x2 0x0 /* SER7_CTS_B*/ + 0x0 0x13 0x1 0x0 0x2 0x0 /* SER7_RTS_B*/ + 0x0 0x14 0x2 0x0 0x2 0x0 /* SER7_RXD0*/ + 0x0 0x15 0x1 0x0 0x2 0x0>; /* SER7_TXD0*/ + }; + + pio4: ucc_pin@04 { + pio-map = < + /* port pin dir open_drain assignment has_irq */ + 0x1 0x0 0x2 0x0 0x2 0x0 /* SER3_CD_B*/ + 0x0 0x1c 0x2 0x0 0x2 0x0 /* SER3_CTS_B*/ + 0x0 0x1d 0x1 0x0 0x2 0x0 /* SER3_RTS_B*/ + 0x0 0x1e 0x2 0x0 0x2 0x0 /* SER3_RXD0*/ + 0x0 0x1f 0x1 0x0 0x2 0x0>; /* SER3_TXD0*/ + }; + }; +}; + +&qe { + serial2: ucc@2600 { + device_type = "serial"; + compatible = "ucc_uart"; + port-number = <0>; + rx-clock-name = "brg6"; + tx-clock-name = "brg6"; + pio-handle = <&pio3>; + }; + + serial3: ucc@2200 { + device_type = "serial"; + compatible = "ucc_uart"; + port-number = <1>; + rx-clock-name = "brg2"; + tx-clock-name = "brg2"; + pio-handle = <&pio4>; + }; +}; diff --git a/arch/powerpc/boot/dts/p1025rdb_32b.dts b/arch/powerpc/boot/dts/p1025rdb_32b.dts new file mode 100644 index 000000000..a2ed6280b --- /dev/null +++ b/arch/powerpc/boot/dts/p1025rdb_32b.dts @@ -0,0 +1,133 @@ +/* + * P1025 RDB Device Tree Source (32-bit address map) + * + * Copyright 2011 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +/include/ "fsl/p1021si-pre.dtsi" +/ { + model = "fsl,P1025RDB"; + compatible = "fsl,P1025RDB"; + + memory { + device_type = "memory"; + }; + + lbc: localbus@ffe05000 { + reg = <0 0xffe05000 0 0x1000>; + + /* NOR, NAND Flashes */ + ranges = <0x0 0x0 0x0 0xef000000 0x01000000 + 0x1 0x0 0x0 0xff800000 0x00040000>; + }; + + soc: soc@ffe00000 { + ranges = <0x0 0x0 0xffe00000 0x100000>; + }; + + pci0: pcie@ffe09000 { + ranges = <0x2000000 0x0 0xe0000000 0 0xe0000000 0x0 0x20000000 + 0x1000000 0x0 0x00000000 0 0xffc10000 0x0 0x10000>; + reg = <0 0xffe09000 0 0x1000>; + pcie@0 { + ranges = <0x2000000 0x0 0xe0000000 + 0x2000000 0x0 0xe0000000 + 0x0 0x20000000 + + 0x1000000 0x0 0x0 + 0x1000000 0x0 0x0 + 0x0 0x100000>; + }; + }; + + pci1: pcie@ffe0a000 { + reg = <0 0xffe0a000 0 0x1000>; + ranges = <0x2000000 0x0 0xe0000000 0 0xe0000000 0x0 0x20000000 + 0x1000000 0x0 0x00000000 0 0xffc00000 0x0 0x10000>; + pcie@0 { + ranges = <0x2000000 0x0 0xe0000000 + 0x2000000 0x0 0xe0000000 + 0x0 0x20000000 + + 0x1000000 0x0 0x0 + 0x1000000 0x0 0x0 + 0x0 0x100000>; + }; + }; + + qe: qe@ffe80000 { + ranges = <0x0 0x0 0xffe80000 0x40000>; + reg = <0 0xffe80000 0 0x480>; + brg-frequency = <0>; + bus-frequency = <0>; + status = "disabled"; /* no firmware loaded */ + + enet3: ucc@2000 { + device_type = "network"; + compatible = "ucc_geth"; + rx-clock-name = "clk12"; + tx-clock-name = "clk9"; + pio-handle = <&pio1>; + phy-handle = <&qe_phy0>; + phy-connection-type = "mii"; + }; + + mdio@2120 { + qe_phy0: ethernet-phy@0 { + interrupt-parent = <&mpic>; + interrupts = <4 1 0 0>; + reg = <0x6>; + }; + qe_phy1: ethernet-phy@03 { + interrupt-parent = <&mpic>; + interrupts = <5 1 0 0>; + reg = <0x3>; + }; + tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + + enet4: ucc@2400 { + device_type = "network"; + compatible = "ucc_geth"; + rx-clock-name = "none"; + tx-clock-name = "clk13"; + pio-handle = <&pio2>; + phy-handle = <&qe_phy1>; + phy-connection-type = "rmii"; + }; + }; +}; + +/include/ "p1025rdb.dtsi" +/include/ "fsl/p1021si-post.dtsi" diff --git a/arch/powerpc/boot/dts/p1025rdb_36b.dts b/arch/powerpc/boot/dts/p1025rdb_36b.dts new file mode 100644 index 000000000..06deb6f34 --- /dev/null +++ b/arch/powerpc/boot/dts/p1025rdb_36b.dts @@ -0,0 +1,93 @@ +/* + * P1025 RDB Device Tree Source (36-bit address map) + * + * Copyright 2011 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +/include/ "fsl/p1021si-pre.dtsi" +/ { + model = "fsl,P1025RDB"; + compatible = "fsl,P1025RDB"; + + memory { + device_type = "memory"; + }; + + lbc: localbus@fffe05000 { + reg = <0xf 0xffe05000 0 0x1000>; + + /* NOR, NAND Flashes */ + ranges = <0x0 0x0 0xf 0xef000000 0x01000000 + 0x1 0x0 0xf 0xff800000 0x00040000>; + }; + + soc: soc@fffe00000 { + ranges = <0x0 0xf 0xffe00000 0x100000>; + }; + + pci0: pcie@fffe09000 { + reg = <0xf 0xffe09000 0 0x1000>; + ranges = <0x2000000 0x0 0xe0000000 0xe 0x20000000 0x0 0x20000000 + 0x1000000 0x0 0x00000000 0xf 0xffc10000 0x0 0x10000>; + pcie@0 { + ranges = <0x2000000 0x0 0xe0000000 + 0x2000000 0x0 0xe0000000 + 0x0 0x20000000 + + 0x1000000 0x0 0x0 + 0x1000000 0x0 0x0 + 0x0 0x100000>; + }; + }; + + pci1: pcie@fffe0a000 { + reg = <0xf 0xffe0a000 0 0x1000>; + ranges = <0x2000000 0x0 0xe0000000 0xc 0x00000000 0x0 0x20000000 + 0x1000000 0x0 0x00000000 0xf 0xffc00000 0x0 0x10000>; + pcie@0 { + ranges = <0x2000000 0x0 0xe0000000 + 0x2000000 0x0 0xe0000000 + 0x0 0x20000000 + + 0x1000000 0x0 0x0 + 0x1000000 0x0 0x0 + 0x0 0x100000>; + }; + }; + + qe: qe@fffe80000 { + status = "disabled"; /* no firmware loaded */ + }; + +}; + +/include/ "p1025rdb.dtsi" +/include/ "fsl/p1021si-post.dtsi" diff --git a/arch/powerpc/boot/dts/p1025twr.dts b/arch/powerpc/boot/dts/p1025twr.dts new file mode 100644 index 000000000..9036a4987 --- /dev/null +++ b/arch/powerpc/boot/dts/p1025twr.dts @@ -0,0 +1,95 @@ +/* + * P1025 TWR Device Tree Source (32-bit address map) + * + * Copyright 2013 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +/include/ "fsl/p1021si-pre.dtsi" +/ { + model = "fsl,P1025"; + compatible = "fsl,TWR-P1025"; + + memory { + device_type = "memory"; + }; + + lbc: localbus@ffe05000 { + reg = <0 0xffe05000 0 0x1000>; + + /* NOR Flash and SSD1289 */ + ranges = <0x0 0x0 0x0 0xec000000 0x04000000 + 0x2 0x0 0x0 0xe0000000 0x00020000>; + }; + + soc: soc@ffe00000 { + ranges = <0x0 0x0 0xffe00000 0x100000>; + }; + + pci0: pcie@ffe09000 { + ranges = <0x2000000 0x0 0xa0000000 0 0xa0000000 0x0 0x20000000 + 0x1000000 0x0 0x00000000 0 0xffc10000 0x0 0x10000>; + reg = <0 0xffe09000 0 0x1000>; + pcie@0 { + ranges = <0x2000000 0x0 0xa0000000 + 0x2000000 0x0 0xa0000000 + 0x0 0x20000000 + + 0x1000000 0x0 0x0 + 0x1000000 0x0 0x0 + 0x0 0x100000>; + }; + }; + + pci1: pcie@ffe0a000 { + reg = <0 0xffe0a000 0 0x1000>; + ranges = <0x2000000 0x0 0x80000000 0 0x80000000 0x0 0x20000000 + 0x1000000 0x0 0x00000000 0 0xffc00000 0x0 0x10000>; + pcie@0 { + ranges = <0x2000000 0x0 0x80000000 + 0x2000000 0x0 0x80000000 + 0x0 0x20000000 + + 0x1000000 0x0 0x0 + 0x1000000 0x0 0x0 + 0x0 0x100000>; + }; + }; + + qe: qe@ffe80000 { + ranges = <0x0 0x0 0xffe80000 0x40000>; + reg = <0 0xffe80000 0 0x480>; + brg-frequency = <0>; + bus-frequency = <0>; + }; +}; + +/include/ "p1025twr.dtsi" +/include/ "fsl/p1021si-post.dtsi" diff --git a/arch/powerpc/boot/dts/p1025twr.dtsi b/arch/powerpc/boot/dts/p1025twr.dtsi new file mode 100644 index 000000000..8453501c2 --- /dev/null +++ b/arch/powerpc/boot/dts/p1025twr.dtsi @@ -0,0 +1,280 @@ +/* + * P1025 TWR Device Tree Source stub (no addresses or top-level ranges) + * + * Copyright 2013 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +/{ + aliases { + ethernet3 = &enet3; + ethernet4 = &enet4; + }; +}; + +&lbc { + nor@0,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "cfi-flash"; + reg = <0x0 0x0 0x4000000>; + bank-width = <2>; + device-width = <1>; + + partition@0 { + /* This location must not be altered */ + /* 256KB for Vitesse 7385 Switch firmware */ + reg = <0x0 0x00040000>; + label = "NOR Vitesse-7385 Firmware"; + read-only; + }; + + partition@40000 { + /* 256KB for DTB Image */ + reg = <0x00040000 0x00040000>; + label = "NOR DTB Image"; + }; + + partition@80000 { + /* 5.5 MB for Linux Kernel Image */ + reg = <0x00080000 0x00580000>; + label = "NOR Linux Kernel Image"; + }; + + partition@400000 { + /* 56.75MB for Root file System */ + reg = <0x00600000 0x038c0000>; + label = "NOR Root File System"; + }; + + partition@ec0000 { + /* This location must not be altered */ + /* 256KB for QE ucode firmware*/ + reg = <0x03ec0000 0x00040000>; + label = "NOR QE microcode firmware"; + read-only; + }; + + partition@f00000 { + /* This location must not be altered */ + /* 512KB for u-boot Bootloader Image */ + /* 512KB for u-boot Environment Variables */ + reg = <0x03f00000 0x00100000>; + label = "NOR U-Boot Image"; + read-only; + }; + }; + + /* CS2 for Display */ + display@2,0 { + compatible = "solomon,ssd1289fb"; + reg = <0x2 0x0000 0x0004>; + }; + +}; + +&soc { + usb@22000 { + phy_type = "ulpi"; + }; + + mdio@24000 { + phy0: ethernet-phy@2 { + interrupt-parent = <&mpic>; + interrupts = <1 1 0 0>; + reg = <0x2>; + }; + + phy1: ethernet-phy@1 { + interrupt-parent = <&mpic>; + interrupts = <2 1 0 0>; + reg = <0x1>; + }; + + tbi0: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + + mdio@25000 { + tbi1: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + + mdio@26000 { + tbi2: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + + enet0: ethernet@b0000 { + phy-handle = <&phy0>; + phy-connection-type = "rgmii-id"; + + }; + + enet1: ethernet@b1000 { + status = "disabled"; + }; + + enet2: ethernet@b2000 { + phy-handle = <&phy1>; + phy-connection-type = "rgmii-id"; + }; + + par_io@e0100 { + #address-cells = <1>; + #size-cells = <1>; + reg = <0xe0100 0x60>; + ranges = <0x0 0xe0100 0x60>; + device_type = "par_io"; + num-ports = <3>; + pio1: ucc_pin@01 { + pio-map = < + /* port pin dir open_drain assignment has_irq */ + 0x1 0x13 0x1 0x0 0x1 0x0 /* QE_MUX_MDC */ + 0x1 0x14 0x3 0x0 0x1 0x0 /* QE_MUX_MDIO */ + 0x0 0x17 0x2 0x0 0x2 0x0 /* CLK12 */ + 0x0 0x18 0x2 0x0 0x1 0x0 /* CLK9 */ + 0x0 0x7 0x1 0x0 0x2 0x0 /* ENET1_TXD0_SER1_TXD0 */ + 0x0 0x9 0x1 0x0 0x2 0x0 /* ENET1_TXD1_SER1_TXD1 */ + 0x0 0xb 0x1 0x0 0x2 0x0 /* ENET1_TXD2_SER1_TXD2 */ + 0x0 0xc 0x1 0x0 0x2 0x0 /* ENET1_TXD3_SER1_TXD3 */ + 0x0 0x6 0x2 0x0 0x2 0x0 /* ENET1_RXD0_SER1_RXD0 */ + 0x0 0xa 0x2 0x0 0x2 0x0 /* ENET1_RXD1_SER1_RXD1 */ + 0x0 0xe 0x2 0x0 0x2 0x0 /* ENET1_RXD2_SER1_RXD2 */ + 0x0 0xf 0x2 0x0 0x2 0x0 /* ENET1_RXD3_SER1_RXD3 */ + 0x0 0x5 0x1 0x0 0x2 0x0 /* ENET1_TX_EN_SER1_RTS_B */ + 0x0 0xd 0x1 0x0 0x2 0x0 /* ENET1_TX_ER */ + 0x0 0x4 0x2 0x0 0x2 0x0 /* ENET1_RX_DV_SER1_CTS_B */ + 0x0 0x8 0x2 0x0 0x2 0x0 /* ENET1_RX_ER_SER1_CD_B */ + 0x0 0x11 0x2 0x0 0x2 0x0 /* ENET1_CRS */ + 0x0 0x10 0x2 0x0 0x2 0x0>; /* ENET1_COL */ + }; + + pio2: ucc_pin@02 { + pio-map = < + /* port pin dir open_drain assignment has_irq */ + 0x1 0x13 0x1 0x0 0x1 0x0 /* QE_MUX_MDC */ + 0x1 0x14 0x3 0x0 0x1 0x0 /* QE_MUX_MDIO */ + 0x1 0xb 0x2 0x0 0x1 0x0 /* CLK13 */ + 0x1 0x7 0x1 0x0 0x2 0x0 /* ENET5_TXD0_SER5_TXD0 */ + 0x1 0xa 0x1 0x0 0x2 0x0 /* ENET5_TXD1_SER5_TXD1 */ + 0x1 0x6 0x2 0x0 0x2 0x0 /* ENET5_RXD0_SER5_RXD0 */ + 0x1 0x9 0x2 0x0 0x2 0x0 /* ENET5_RXD1_SER5_RXD1 */ + 0x1 0x5 0x1 0x0 0x2 0x0 /* ENET5_TX_EN_SER5_RTS_B */ + 0x1 0x4 0x2 0x0 0x2 0x0 /* ENET5_RX_DV_SER5_CTS_B */ + 0x1 0x8 0x2 0x0 0x2 0x0>; /* ENET5_RX_ER_SER5_CD_B */ + }; + + pio3: ucc_pin@03 { + pio-map = < + /* port pin dir open_drain assignment has_irq */ + 0x0 0x16 0x2 0x0 0x2 0x0 /* SER7_CD_B*/ + 0x0 0x12 0x2 0x0 0x2 0x0 /* SER7_CTS_B*/ + 0x0 0x13 0x1 0x0 0x2 0x0 /* SER7_RTS_B*/ + 0x0 0x14 0x2 0x0 0x2 0x0 /* SER7_RXD0*/ + 0x0 0x15 0x1 0x0 0x2 0x0>; /* SER7_TXD0*/ + }; + + pio4: ucc_pin@04 { + pio-map = < + /* port pin dir open_drain assignment has_irq */ + 0x1 0x0 0x2 0x0 0x2 0x0 /* SER3_CD_B*/ + 0x0 0x1c 0x2 0x0 0x2 0x0 /* SER3_CTS_B*/ + 0x0 0x1d 0x1 0x0 0x2 0x0 /* SER3_RTS_B*/ + 0x0 0x1e 0x2 0x0 0x2 0x0 /* SER3_RXD0*/ + 0x0 0x1f 0x1 0x0 0x2 0x0>; /* SER3_TXD0*/ + }; + }; +}; + +&qe { + enet3: ucc@2000 { + device_type = "network"; + compatible = "ucc_geth"; + rx-clock-name = "clk12"; + tx-clock-name = "clk9"; + pio-handle = <&pio1>; + phy-handle = <&qe_phy0>; + phy-connection-type = "mii"; + }; + + mdio@2120 { + qe_phy0: ethernet-phy@18 { + interrupt-parent = <&mpic>; + interrupts = <4 1 0 0>; + reg = <0x18>; + device_type = "ethernet-phy"; + }; + qe_phy1: ethernet-phy@19 { + interrupt-parent = <&mpic>; + interrupts = <5 1 0 0>; + reg = <0x19>; + device_type = "ethernet-phy"; + }; + tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + + enet4: ucc@2400 { + device_type = "network"; + compatible = "ucc_geth"; + rx-clock-name = "none"; + tx-clock-name = "clk13"; + pio-handle = <&pio2>; + phy-handle = <&qe_phy1>; + phy-connection-type = "rmii"; + }; + + serial2: ucc@2600 { + device_type = "serial"; + compatible = "ucc_uart"; + port-number = <0>; + rx-clock-name = "brg6"; + tx-clock-name = "brg6"; + pio-handle = <&pio3>; + }; + + serial3: ucc@2200 { + device_type = "serial"; + compatible = "ucc_uart"; + port-number = <1>; + rx-clock-name = "brg2"; + tx-clock-name = "brg2"; + pio-handle = <&pio4>; + }; +}; diff --git a/arch/powerpc/boot/dts/p2020ds.dts b/arch/powerpc/boot/dts/p2020ds.dts new file mode 100644 index 000000000..237310cc7 --- /dev/null +++ b/arch/powerpc/boot/dts/p2020ds.dts @@ -0,0 +1,89 @@ +/* + * P2020 DS Device Tree Source + * + * Copyright 2009-2011 Freescale Semiconductor Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +/include/ "fsl/p2020si-pre.dtsi" + +/ { + model = "fsl,P2020DS"; + compatible = "fsl,P2020DS"; + + memory { + device_type = "memory"; + }; + + board_lbc: lbc: localbus@ffe05000 { + ranges = <0x0 0x0 0x0 0xe8000000 0x08000000 + 0x1 0x0 0x0 0xe0000000 0x08000000 + 0x2 0x0 0x0 0xffa00000 0x00040000 + 0x3 0x0 0x0 0xffdf0000 0x00008000 + 0x4 0x0 0x0 0xffa40000 0x00040000 + 0x5 0x0 0x0 0xffa80000 0x00040000 + 0x6 0x0 0x0 0xffac0000 0x00040000>; + reg = <0 0xffe05000 0 0x1000>; + }; + + board_soc: soc: soc@ffe00000 { + ranges = <0x0 0x0 0xffe00000 0x100000>; + }; + + pci2: pcie@ffe08000 { + ranges = <0x2000000 0x0 0x80000000 0 0x80000000 0x0 0x20000000 + 0x1000000 0x0 0x00000000 0 0xffc00000 0x0 0x10000>; + reg = <0 0xffe08000 0 0x1000>; + pcie@0 { + ranges = <0x2000000 0x0 0x80000000 + 0x2000000 0x0 0x80000000 + 0x0 0x20000000 + + 0x1000000 0x0 0x0 + 0x1000000 0x0 0x0 + 0x0 0x10000>; + }; + }; + + board_pci1: pci1: pcie@ffe09000 { + ranges = <0x2000000 0x0 0xa0000000 0 0xa0000000 0x0 0x20000000 + 0x1000000 0x0 0x00000000 0 0xffc10000 0x0 0x10000>; + reg = <0 0xffe09000 0 0x1000>; + pcie@0 { + ranges = <0x2000000 0x0 0xa0000000 + 0x2000000 0x0 0xa0000000 + 0x0 0x20000000 + + 0x1000000 0x0 0x0 + 0x1000000 0x0 0x0 + 0x0 0x10000>; + }; + }; + + pci0: pcie@ffe0a000 { + ranges = <0x2000000 0x0 0xc0000000 0 0xc0000000 0x0 0x20000000 + 0x1000000 0x0 0x00000000 0 0xffc20000 0x0 0x10000>; + reg = <0 0xffe0a000 0 0x1000>; + pcie@0 { + ranges = <0x2000000 0x0 0xc0000000 + 0x2000000 0x0 0xc0000000 + 0x0 0x20000000 + + 0x1000000 0x0 0x0 + 0x1000000 0x0 0x0 + 0x0 0x10000>; + }; + }; +}; + +/* + * p2020ds.dtsi must be last to ensure board_pci0 overrides pci0 settings + * for interrupt-map & interrupt-map-mask + */ + +/include/ "fsl/p2020si-post.dtsi" +/include/ "p2020ds.dtsi" diff --git a/arch/powerpc/boot/dts/p2020ds.dtsi b/arch/powerpc/boot/dts/p2020ds.dtsi new file mode 100644 index 000000000..e699cf95b --- /dev/null +++ b/arch/powerpc/boot/dts/p2020ds.dtsi @@ -0,0 +1,327 @@ +/* + * P2020DS Device Tree Source stub (no addresses or top-level ranges) + * + * Copyright 2011-2012 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +&board_lbc { + nor@0,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "cfi-flash"; + reg = <0x0 0x0 0x8000000>; + bank-width = <2>; + device-width = <1>; + + ramdisk@0 { + reg = <0x0 0x03000000>; + read-only; + }; + + diagnostic@3000000 { + reg = <0x03000000 0x00e00000>; + read-only; + }; + + dink@3e00000 { + reg = <0x03e00000 0x00200000>; + read-only; + }; + + kernel@4000000 { + reg = <0x04000000 0x00400000>; + read-only; + }; + + jffs2@4400000 { + reg = <0x04400000 0x03b00000>; + }; + + dtb@7f00000 { + reg = <0x07f00000 0x00080000>; + read-only; + }; + + u-boot@7f80000 { + reg = <0x07f80000 0x00080000>; + read-only; + }; + }; + + nand@2,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,elbc-fcm-nand"; + reg = <0x2 0x0 0x40000>; + + u-boot@0 { + reg = <0x0 0x02000000>; + read-only; + }; + + jffs2@2000000 { + reg = <0x02000000 0x10000000>; + }; + + ramdisk@12000000 { + reg = <0x12000000 0x08000000>; + read-only; + }; + + kernel@1a000000 { + reg = <0x1a000000 0x04000000>; + }; + + dtb@1e000000 { + reg = <0x1e000000 0x01000000>; + read-only; + }; + + empty@1f000000 { + reg = <0x1f000000 0x21000000>; + }; + }; + + board-control@3,0 { + compatible = "fsl,p2020ds-fpga", "fsl,fpga-ngpixis"; + reg = <0x3 0x0 0x30>; + }; + + nand@4,0 { + compatible = "fsl,elbc-fcm-nand"; + reg = <0x4 0x0 0x40000>; + }; + + nand@5,0 { + compatible = "fsl,elbc-fcm-nand"; + reg = <0x5 0x0 0x40000>; + }; + + nand@6,0 { + compatible = "fsl,elbc-fcm-nand"; + reg = <0x6 0x0 0x40000>; + }; +}; + +&board_soc { + usb@22000 { + phy_type = "ulpi"; + dr_mode = "host"; + }; + + mdio@24520 { + phy0: ethernet-phy@0 { + interrupts = <3 1 0 0>; + reg = <0x0>; + }; + phy1: ethernet-phy@1 { + interrupts = <3 1 0 0>; + reg = <0x1>; + }; + phy2: ethernet-phy@2 { + interrupts = <3 1 0 0>; + reg = <0x2>; + }; + + sgmii_phy1: sgmii-phy@1 { + interrupts = <5 1 0 0>; + reg = <0x1c>; + }; + sgmii_phy2: sgmii-phy@2 { + interrupts = <5 1 0 0>; + reg = <0x1d>; + }; + + tbi0: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + + }; + + mdio@25520 { + tbi1: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + + mdio@26520 { + tbi2: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + + }; + + ptp_clock@24e00 { + fsl,tclk-period = <5>; + fsl,tmr-prsc = <200>; + fsl,tmr-add = <0xCCCCCCCD>; + fsl,tmr-fiper1 = <0x3B9AC9FB>; + fsl,tmr-fiper2 = <0x0001869B>; + fsl,max-adj = <249999999>; + }; + + enet0: ethernet@24000 { + tbi-handle = <&tbi0>; + phy-handle = <&phy0>; + phy-connection-type = "rgmii-id"; + }; + + enet1: ethernet@25000 { + tbi-handle = <&tbi1>; + phy-handle = <&phy1>; + phy-connection-type = "rgmii-id"; + + }; + + enet2: ethernet@26000 { + tbi-handle = <&tbi2>; + phy-handle = <&phy2>; + phy-connection-type = "rgmii-id"; + }; +}; + +&board_pci1 { + pcie@0 { + interrupt-map-mask = <0xff00 0x0 0x0 0x7>; + interrupt-map = < + + // IDSEL 0x11 func 0 - PCI slot 1 + 0x8800 0x0 0x0 0x1 &i8259 0x9 0x2 + 0x8800 0x0 0x0 0x2 &i8259 0xa 0x2 + + // IDSEL 0x11 func 1 - PCI slot 1 + 0x8900 0x0 0x0 0x1 &i8259 0x9 0x2 + 0x8900 0x0 0x0 0x2 &i8259 0xa 0x2 + + // IDSEL 0x11 func 2 - PCI slot 1 + 0x8a00 0x0 0x0 0x1 &i8259 0x9 0x2 + 0x8a00 0x0 0x0 0x2 &i8259 0xa 0x2 + + // IDSEL 0x11 func 3 - PCI slot 1 + 0x8b00 0x0 0x0 0x1 &i8259 0x9 0x2 + 0x8b00 0x0 0x0 0x2 &i8259 0xa 0x2 + + // IDSEL 0x11 func 4 - PCI slot 1 + 0x8c00 0x0 0x0 0x1 &i8259 0x9 0x2 + 0x8c00 0x0 0x0 0x2 &i8259 0xa 0x2 + + // IDSEL 0x11 func 5 - PCI slot 1 + 0x8d00 0x0 0x0 0x1 &i8259 0x9 0x2 + 0x8d00 0x0 0x0 0x2 &i8259 0xa 0x2 + + // IDSEL 0x11 func 6 - PCI slot 1 + 0x8e00 0x0 0x0 0x1 &i8259 0x9 0x2 + 0x8e00 0x0 0x0 0x2 &i8259 0xa 0x2 + + // IDSEL 0x11 func 7 - PCI slot 1 + 0x8f00 0x0 0x0 0x1 &i8259 0x9 0x2 + 0x8f00 0x0 0x0 0x2 &i8259 0xa 0x2 + + // IDSEL 0x1d Audio + 0xe800 0x0 0x0 0x1 &i8259 0x6 0x2 + + // IDSEL 0x1e Legacy + 0xf000 0x0 0x0 0x1 &i8259 0x7 0x2 + 0xf100 0x0 0x0 0x1 &i8259 0x7 0x2 + + // IDSEL 0x1f IDE/SATA + 0xf800 0x0 0x0 0x1 &i8259 0xe 0x2 + 0xf900 0x0 0x0 0x1 &i8259 0x5 0x2 + >; + + uli1575@0 { + reg = <0x0 0x0 0x0 0x0 0x0>; + #size-cells = <2>; + #address-cells = <3>; + ranges = <0x2000000 0x0 0xa0000000 + 0x2000000 0x0 0xa0000000 + 0x0 0x20000000 + + 0x1000000 0x0 0x0 + 0x1000000 0x0 0x0 + 0x0 0x10000>; + isa@1e { + device_type = "isa"; + #interrupt-cells = <2>; + #size-cells = <1>; + #address-cells = <2>; + reg = <0xf000 0x0 0x0 0x0 0x0>; + ranges = <0x1 0x0 0x1000000 0x0 0x0 + 0x1000>; + interrupt-parent = <&i8259>; + + i8259: interrupt-controller@20 { + reg = <0x1 0x20 0x2 + 0x1 0xa0 0x2 + 0x1 0x4d0 0x2>; + interrupt-controller; + device_type = "interrupt-controller"; + #address-cells = <0>; + #interrupt-cells = <2>; + compatible = "chrp,iic"; + interrupts = <4 1 0 0>; + interrupt-parent = <&mpic>; + }; + + i8042@60 { + #size-cells = <0>; + #address-cells = <1>; + reg = <0x1 0x60 0x1 0x1 0x64 0x1>; + interrupts = <1 3 12 3>; + interrupt-parent = + <&i8259>; + + keyboard@0 { + reg = <0x0>; + compatible = "pnpPNP,303"; + }; + + mouse@1 { + reg = <0x1>; + compatible = "pnpPNP,f03"; + }; + }; + + rtc@70 { + compatible = "pnpPNP,b00"; + reg = <0x1 0x70 0x2>; + }; + + gpio@400 { + reg = <0x1 0x400 0x80>; + }; + }; + }; + }; +}; diff --git a/arch/powerpc/boot/dts/p2020rdb-pc.dtsi b/arch/powerpc/boot/dts/p2020rdb-pc.dtsi new file mode 100644 index 000000000..c21d1c7d1 --- /dev/null +++ b/arch/powerpc/boot/dts/p2020rdb-pc.dtsi @@ -0,0 +1,241 @@ +/* + * P2020 RDB-PC Device Tree Source stub (no addresses or top-level ranges) + * + * Copyright 2011 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +&lbc { + nor@0,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "cfi-flash"; + reg = <0x0 0x0 0x1000000>; + bank-width = <2>; + device-width = <1>; + + partition@0 { + /* This location must not be altered */ + /* 256KB for Vitesse 7385 Switch firmware */ + reg = <0x0 0x00040000>; + label = "NOR Vitesse-7385 Firmware"; + read-only; + }; + + partition@40000 { + /* 256KB for DTB Image */ + reg = <0x00040000 0x00040000>; + label = "NOR DTB Image"; + }; + + partition@80000 { + /* 3.5 MB for Linux Kernel Image */ + reg = <0x00080000 0x00380000>; + label = "NOR Linux Kernel Image"; + }; + + partition@400000 { + /* 11MB for JFFS2 based Root file System */ + reg = <0x00400000 0x00b00000>; + label = "NOR JFFS2 Root File System"; + }; + + partition@f00000 { + /* This location must not be altered */ + /* 512KB for u-boot Bootloader Image */ + /* 512KB for u-boot Environment Variables */ + reg = <0x00f00000 0x00100000>; + label = "NOR U-Boot Image"; + read-only; + }; + }; + + nand@1,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,p2020-fcm-nand", + "fsl,elbc-fcm-nand"; + reg = <0x1 0x0 0x40000>; + + partition@0 { + /* This location must not be altered */ + /* 1MB for u-boot Bootloader Image */ + reg = <0x0 0x00100000>; + label = "NAND U-Boot Image"; + read-only; + }; + + partition@100000 { + /* 1MB for DTB Image */ + reg = <0x00100000 0x00100000>; + label = "NAND DTB Image"; + }; + + partition@200000 { + /* 4MB for Linux Kernel Image */ + reg = <0x00200000 0x00400000>; + label = "NAND Linux Kernel Image"; + }; + + partition@600000 { + /* 4MB for Compressed Root file System Image */ + reg = <0x00600000 0x00400000>; + label = "NAND Compressed RFS Image"; + }; + + partition@a00000 { + /* 7MB for JFFS2 based Root file System */ + reg = <0x00a00000 0x00700000>; + label = "NAND JFFS2 Root File System"; + }; + + partition@1100000 { + /* 15MB for JFFS2 based Root file System */ + reg = <0x01100000 0x00f00000>; + label = "NAND Writable User area"; + }; + }; + + L2switch@2,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "vitesse-7385"; + reg = <0x2 0x0 0x20000>; + }; + + cpld@3,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "cpld"; + reg = <0x3 0x0 0x20000>; + read-only; + }; +}; + +&soc { + i2c@3000 { + rtc@68 { + compatible = "pericom,pt7c4338"; + reg = <0x68>; + }; + }; + + spi@7000 { + flash@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "spansion,m25p80"; + reg = <0>; + spi-max-frequency = <40000000>; + + partition@0 { + /* 512KB for u-boot Bootloader Image */ + reg = <0x0 0x00080000>; + label = "SPI U-Boot Image"; + read-only; + }; + + partition@80000 { + /* 512KB for DTB Image */ + reg = <0x00080000 0x00080000>; + label = "SPI DTB Image"; + }; + + partition@100000 { + /* 4MB for Linux Kernel Image */ + reg = <0x00100000 0x00400000>; + label = "SPI Linux Kernel Image"; + }; + + partition@500000 { + /* 4MB for Compressed RFS Image */ + reg = <0x00500000 0x00400000>; + label = "SPI Compressed RFS Image"; + }; + + partition@900000 { + /* 7MB for JFFS2 based RFS */ + reg = <0x00900000 0x00700000>; + label = "SPI JFFS2 RFS"; + }; + }; + }; + + usb@22000 { + phy_type = "ulpi"; + }; + + mdio@24520 { + phy0: ethernet-phy@0 { + interrupts = <3 1 0 0>; + reg = <0x0>; + }; + phy1: ethernet-phy@1 { + interrupts = <2 1 0 0>; + reg = <0x1>; + }; + }; + + mdio@25520 { + tbi0: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + + mdio@26520 { + status = "disabled"; + }; + + ptp_clock@24e00 { + fsl,tclk-period = <5>; + fsl,tmr-prsc = <200>; + fsl,tmr-add = <0xCCCCCCCD>; + fsl,tmr-fiper1 = <0x3B9AC9FB>; + fsl,tmr-fiper2 = <0x0001869B>; + fsl,max-adj = <249999999>; + }; + + enet0: ethernet@24000 { + fixed-link = <1 1 1000 0 0>; + phy-connection-type = "rgmii-id"; + }; + + enet1: ethernet@25000 { + tbi-handle = <&tbi0>; + phy-handle = <&phy0>; + phy-connection-type = "sgmii"; + }; + + enet2: ethernet@26000 { + phy-handle = <&phy1>; + phy-connection-type = "rgmii-id"; + }; +}; diff --git a/arch/powerpc/boot/dts/p2020rdb-pc_32b.dts b/arch/powerpc/boot/dts/p2020rdb-pc_32b.dts new file mode 100644 index 000000000..57573bd52 --- /dev/null +++ b/arch/powerpc/boot/dts/p2020rdb-pc_32b.dts @@ -0,0 +1,96 @@ +/* + * P2020 RDB-PC 32Bit Physical Address Map Device Tree Source + * + * Copyright 2011 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +/include/ "fsl/p2020si-pre.dtsi" + +/ { + model = "fsl,P2020RDB"; + compatible = "fsl,P2020RDB-PC"; + + memory { + device_type = "memory"; + }; + + lbc: localbus@ffe05000 { + reg = <0 0xffe05000 0 0x1000>; + + /* NOR and NAND Flashes */ + ranges = <0x0 0x0 0x0 0xef000000 0x01000000 + 0x1 0x0 0x0 0xff800000 0x00040000 + 0x2 0x0 0x0 0xffb00000 0x00020000 + 0x3 0x0 0x0 0xffa00000 0x00020000>; + }; + + soc: soc@ffe00000 { + ranges = <0x0 0x0 0xffe00000 0x100000>; + }; + + pci2: pcie@ffe08000 { + reg = <0 0xffe08000 0 0x1000>; + status = "disabled"; + }; + + pci1: pcie@ffe09000 { + reg = <0 0xffe09000 0 0x1000>; + ranges = <0x2000000 0x0 0xe0000000 0 0xa0000000 0x0 0x20000000 + 0x1000000 0x0 0x00000000 0 0xffc10000 0x0 0x10000>; + pcie@0 { + ranges = <0x2000000 0x0 0xe0000000 + 0x2000000 0x0 0xe0000000 + 0x0 0x20000000 + + 0x1000000 0x0 0x0 + 0x1000000 0x0 0x0 + 0x0 0x100000>; + }; + }; + + pci0: pcie@ffe0a000 { + reg = <0 0xffe0a000 0 0x1000>; + ranges = <0x2000000 0x0 0xe0000000 0 0x80000000 0x0 0x20000000 + 0x1000000 0x0 0x00000000 0 0xffc00000 0x0 0x10000>; + pcie@0 { + ranges = <0x2000000 0x0 0xe0000000 + 0x2000000 0x0 0xe0000000 + 0x0 0x20000000 + + 0x1000000 0x0 0x0 + 0x1000000 0x0 0x0 + 0x0 0x100000>; + }; + }; +}; + +/include/ "p2020rdb-pc.dtsi" +/include/ "fsl/p2020si-post.dtsi" diff --git a/arch/powerpc/boot/dts/p2020rdb-pc_36b.dts b/arch/powerpc/boot/dts/p2020rdb-pc_36b.dts new file mode 100644 index 000000000..470247ea6 --- /dev/null +++ b/arch/powerpc/boot/dts/p2020rdb-pc_36b.dts @@ -0,0 +1,96 @@ +/* + * P2020 RDB-PC 36Bit Physical Address Map Device Tree Source + * + * Copyright 2011 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +/include/ "fsl/p2020si-pre.dtsi" + +/ { + model = "fsl,P2020RDB"; + compatible = "fsl,P2020RDB-PC"; + + memory { + device_type = "memory"; + }; + + lbc: localbus@fffe05000 { + reg = <0xf 0xffe05000 0 0x1000>; + + /* NOR and NAND Flashes */ + ranges = <0x0 0x0 0xf 0xef000000 0x01000000 + 0x1 0x0 0xf 0xff800000 0x00040000 + 0x2 0x0 0xf 0xffb00000 0x00020000 + 0x3 0x0 0xf 0xffa00000 0x00020000>; + }; + + soc: soc@fffe00000 { + ranges = <0x0 0xf 0xffe00000 0x100000>; + }; + + pci2: pcie@fffe08000 { + reg = <0xf 0xffe08000 0 0x1000>; + status = "disabled"; + }; + + pci1: pcie@fffe09000 { + reg = <0xf 0xffe09000 0 0x1000>; + ranges = <0x2000000 0x0 0xe0000000 0xc 0x20000000 0x0 0x20000000 + 0x1000000 0x0 0x00000000 0xf 0xffc10000 0x0 0x10000>; + pcie@0 { + ranges = <0x2000000 0x0 0xe0000000 + 0x2000000 0x0 0xe0000000 + 0x0 0x20000000 + + 0x1000000 0x0 0x0 + 0x1000000 0x0 0x0 + 0x0 0x100000>; + }; + }; + + pci0: pcie@fffe0a000 { + reg = <0xf 0xffe0a000 0 0x1000>; + ranges = <0x2000000 0x0 0xe0000000 0xc 0x00000000 0x0 0x20000000 + 0x1000000 0x0 0x00000000 0xf 0xffc00000 0x0 0x10000>; + pcie@0 { + ranges = <0x2000000 0x0 0xe0000000 + 0x2000000 0x0 0xe0000000 + 0x0 0x20000000 + + 0x1000000 0x0 0x0 + 0x1000000 0x0 0x0 + 0x0 0x100000>; + }; + }; +}; + +/include/ "p2020rdb-pc.dtsi" +/include/ "fsl/p2020si-post.dtsi" diff --git a/arch/powerpc/boot/dts/p2020rdb.dts b/arch/powerpc/boot/dts/p2020rdb.dts new file mode 100644 index 000000000..4d52bce1d --- /dev/null +++ b/arch/powerpc/boot/dts/p2020rdb.dts @@ -0,0 +1,291 @@ +/* + * P2020 RDB Device Tree Source + * + * Copyright 2009-2012 Freescale Semiconductor Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +/include/ "fsl/p2020si-pre.dtsi" + +/ { + model = "fsl,P2020RDB"; + compatible = "fsl,P2020RDB"; + + aliases { + ethernet0 = &enet0; + ethernet1 = &enet1; + ethernet2 = &enet2; + serial0 = &serial0; + serial1 = &serial1; + pci0 = &pci0; + pci1 = &pci1; + }; + + memory { + device_type = "memory"; + }; + + lbc: localbus@ffe05000 { + reg = <0 0xffe05000 0 0x1000>; + + /* NOR and NAND Flashes */ + ranges = <0x0 0x0 0x0 0xef000000 0x01000000 + 0x1 0x0 0x0 0xffa00000 0x00040000 + 0x2 0x0 0x0 0xffb00000 0x00020000>; + + nor@0,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "cfi-flash"; + reg = <0x0 0x0 0x1000000>; + bank-width = <2>; + device-width = <1>; + + partition@0 { + /* This location must not be altered */ + /* 256KB for Vitesse 7385 Switch firmware */ + reg = <0x0 0x00040000>; + label = "NOR (RO) Vitesse-7385 Firmware"; + read-only; + }; + + partition@40000 { + /* 256KB for DTB Image */ + reg = <0x00040000 0x00040000>; + label = "NOR (RO) DTB Image"; + read-only; + }; + + partition@80000 { + /* 3.5 MB for Linux Kernel Image */ + reg = <0x00080000 0x00380000>; + label = "NOR (RO) Linux Kernel Image"; + read-only; + }; + + partition@400000 { + /* 11MB for JFFS2 based Root file System */ + reg = <0x00400000 0x00b00000>; + label = "NOR (RW) JFFS2 Root File System"; + }; + + partition@f00000 { + /* This location must not be altered */ + /* 512KB for u-boot Bootloader Image */ + /* 512KB for u-boot Environment Variables */ + reg = <0x00f00000 0x00100000>; + label = "NOR (RO) U-Boot Image"; + read-only; + }; + }; + + nand@1,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,p2020-fcm-nand", + "fsl,elbc-fcm-nand"; + reg = <0x1 0x0 0x40000>; + + partition@0 { + /* This location must not be altered */ + /* 1MB for u-boot Bootloader Image */ + reg = <0x0 0x00100000>; + label = "NAND (RO) U-Boot Image"; + read-only; + }; + + partition@100000 { + /* 1MB for DTB Image */ + reg = <0x00100000 0x00100000>; + label = "NAND (RO) DTB Image"; + read-only; + }; + + partition@200000 { + /* 4MB for Linux Kernel Image */ + reg = <0x00200000 0x00400000>; + label = "NAND (RO) Linux Kernel Image"; + read-only; + }; + + partition@600000 { + /* 4MB for Compressed Root file System Image */ + reg = <0x00600000 0x00400000>; + label = "NAND (RO) Compressed RFS Image"; + read-only; + }; + + partition@a00000 { + /* 7MB for JFFS2 based Root file System */ + reg = <0x00a00000 0x00700000>; + label = "NAND (RW) JFFS2 Root File System"; + }; + + partition@1100000 { + /* 15MB for JFFS2 based Root file System */ + reg = <0x01100000 0x00f00000>; + label = "NAND (RW) Writable User area"; + }; + }; + + L2switch@2,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "vitesse-7385"; + reg = <0x2 0x0 0x20000>; + }; + + }; + + soc: soc@ffe00000 { + ranges = <0x0 0x0 0xffe00000 0x100000>; + + i2c@3000 { + rtc@68 { + compatible = "dallas,ds1339"; + reg = <0x68>; + }; + }; + + spi@7000 { + flash@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "spansion,s25sl12801"; + reg = <0>; + spi-max-frequency = <40000000>; + + partition@0 { + /* 512KB for u-boot Bootloader Image */ + reg = <0x0 0x00080000>; + label = "SPI (RO) U-Boot Image"; + read-only; + }; + + partition@80000 { + /* 512KB for DTB Image */ + reg = <0x00080000 0x00080000>; + label = "SPI (RO) DTB Image"; + read-only; + }; + + partition@100000 { + /* 4MB for Linux Kernel Image */ + reg = <0x00100000 0x00400000>; + label = "SPI (RO) Linux Kernel Image"; + read-only; + }; + + partition@500000 { + /* 4MB for Compressed RFS Image */ + reg = <0x00500000 0x00400000>; + label = "SPI (RO) Compressed RFS Image"; + read-only; + }; + + partition@900000 { + /* 7MB for JFFS2 based RFS */ + reg = <0x00900000 0x00700000>; + label = "SPI (RW) JFFS2 RFS"; + }; + }; + }; + + usb@22000 { + phy_type = "ulpi"; + dr_mode = "host"; + }; + + mdio@24520 { + phy0: ethernet-phy@0 { + interrupts = <3 1 0 0>; + reg = <0x0>; + }; + phy1: ethernet-phy@1 { + interrupts = <3 1 0 0>; + reg = <0x1>; + }; + tbi-phy@2 { + device_type = "tbi-phy"; + reg = <0x2>; + }; + }; + + mdio@25520 { + tbi0: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + + mdio@26520 { + status = "disabled"; + }; + + ptp_clock@24e00 { + fsl,tclk-period = <5>; + fsl,tmr-prsc = <200>; + fsl,tmr-add = <0xCCCCCCCD>; + fsl,tmr-fiper1 = <0x3B9AC9FB>; + fsl,tmr-fiper2 = <0x0001869B>; + fsl,max-adj = <249999999>; + }; + + enet0: ethernet@24000 { + fixed-link = <1 1 1000 0 0>; + phy-connection-type = "rgmii-id"; + }; + + enet1: ethernet@25000 { + tbi-handle = <&tbi0>; + phy-handle = <&phy0>; + phy-connection-type = "sgmii"; + }; + + enet2: ethernet@26000 { + phy-handle = <&phy1>; + phy-connection-type = "rgmii-id"; + }; + }; + + pci0: pcie@ffe08000 { + reg = <0 0xffe08000 0 0x1000>; + status = "disabled"; + }; + + pci1: pcie@ffe09000 { + reg = <0 0xffe09000 0 0x1000>; + ranges = <0x2000000 0x0 0xa0000000 0 0xa0000000 0x0 0x20000000 + 0x1000000 0x0 0x00000000 0 0xffc10000 0x0 0x10000>; + pcie@0 { + ranges = <0x2000000 0x0 0xa0000000 + 0x2000000 0x0 0xa0000000 + 0x0 0x20000000 + + 0x1000000 0x0 0x0 + 0x1000000 0x0 0x0 + 0x0 0x100000>; + }; + }; + + pci2: pcie@ffe0a000 { + reg = <0 0xffe0a000 0 0x1000>; + ranges = <0x2000000 0x0 0x80000000 0 0x80000000 0x0 0x20000000 + 0x1000000 0x0 0x00000000 0 0xffc00000 0x0 0x10000>; + pcie@0 { + ranges = <0x2000000 0x0 0x80000000 + 0x2000000 0x0 0x80000000 + 0x0 0x20000000 + + 0x1000000 0x0 0x0 + 0x1000000 0x0 0x0 + 0x0 0x100000>; + }; + }; +}; + +/include/ "fsl/p2020si-post.dtsi" diff --git a/arch/powerpc/boot/dts/p2041rdb.dts b/arch/powerpc/boot/dts/p2041rdb.dts new file mode 100644 index 000000000..c1e69dc71 --- /dev/null +++ b/arch/powerpc/boot/dts/p2041rdb.dts @@ -0,0 +1,238 @@ +/* + * P2041RDB Device Tree Source + * + * Copyright 2011 - 2014 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +/include/ "fsl/p2041si-pre.dtsi" + +/ { + model = "fsl,P2041RDB"; + compatible = "fsl,P2041RDB"; + #address-cells = <2>; + #size-cells = <2>; + interrupt-parent = <&mpic>; + + memory { + device_type = "memory"; + }; + + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + bman_fbpr: bman-fbpr { + size = <0 0x1000000>; + alignment = <0 0x1000000>; + }; + }; + + dcsr: dcsr@f00000000 { + ranges = <0x00000000 0xf 0x00000000 0x01008000>; + }; + + bportals: bman-portals@ff4000000 { + ranges = <0x0 0xf 0xf4000000 0x200000>; + }; + + soc: soc@ffe000000 { + ranges = <0x00000000 0xf 0xfe000000 0x1000000>; + reg = <0xf 0xfe000000 0 0x00001000>; + spi@110000 { + flash@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "spansion,s25sl12801"; + reg = <0>; + spi-max-frequency = <40000000>; /* input clock */ + partition@u-boot { + label = "u-boot"; + reg = <0x00000000 0x00100000>; + read-only; + }; + partition@kernel { + label = "kernel"; + reg = <0x00100000 0x00500000>; + read-only; + }; + partition@dtb { + label = "dtb"; + reg = <0x00600000 0x00100000>; + read-only; + }; + partition@fs { + label = "file system"; + reg = <0x00700000 0x00900000>; + }; + }; + }; + + i2c@118000 { + lm75b@48 { + compatible = "nxp,lm75a"; + reg = <0x48>; + }; + eeprom@50 { + compatible = "at24,24c256"; + reg = <0x50>; + }; + rtc@68 { + compatible = "pericom,pt7c4338"; + reg = <0x68>; + }; + adt7461@4c { + compatible = "adi,adt7461"; + reg = <0x4c>; + }; + }; + + i2c@118100 { + eeprom@50 { + compatible = "at24,24c256"; + reg = <0x50>; + }; + }; + + usb1: usb@211000 { + dr_mode = "host"; + }; + }; + + rio: rapidio@ffe0c0000 { + reg = <0xf 0xfe0c0000 0 0x11000>; + + port1 { + ranges = <0 0 0xc 0x20000000 0 0x10000000>; + }; + port2 { + ranges = <0 0 0xc 0x30000000 0 0x10000000>; + }; + }; + + lbc: localbus@ffe124000 { + reg = <0xf 0xfe124000 0 0x1000>; + ranges = <0 0 0xf 0xe8000000 0x08000000 + 1 0 0xf 0xffa00000 0x00040000>; + + flash@0,0 { + compatible = "cfi-flash"; + reg = <0 0 0x08000000>; + bank-width = <2>; + device-width = <2>; + }; + + nand@1,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,elbc-fcm-nand"; + reg = <0x1 0x0 0x40000>; + + partition@0 { + label = "NAND U-Boot Image"; + reg = <0x0 0x02000000>; + read-only; + }; + + partition@2000000 { + label = "NAND Root File System"; + reg = <0x02000000 0x10000000>; + }; + + partition@12000000 { + label = "NAND Compressed RFS Image"; + reg = <0x12000000 0x08000000>; + }; + + partition@1a000000 { + label = "NAND Linux Kernel Image"; + reg = <0x1a000000 0x04000000>; + }; + + partition@1e000000 { + label = "NAND DTB Image"; + reg = <0x1e000000 0x01000000>; + }; + + partition@1f000000 { + label = "NAND Writable User area"; + reg = <0x1f000000 0x01000000>; + }; + }; + }; + + pci0: pcie@ffe200000 { + reg = <0xf 0xfe200000 0 0x1000>; + ranges = <0x02000000 0 0xe0000000 0xc 0x00000000 0x0 0x20000000 + 0x01000000 0 0x00000000 0xf 0xf8000000 0x0 0x00010000>; + pcie@0 { + ranges = <0x02000000 0 0xe0000000 + 0x02000000 0 0xe0000000 + 0 0x20000000 + + 0x01000000 0 0x00000000 + 0x01000000 0 0x00000000 + 0 0x00010000>; + }; + }; + + pci1: pcie@ffe201000 { + reg = <0xf 0xfe201000 0 0x1000>; + ranges = <0x02000000 0x0 0xe0000000 0xc 0x20000000 0x0 0x20000000 + 0x01000000 0x0 0x00000000 0xf 0xf8010000 0x0 0x00010000>; + pcie@0 { + ranges = <0x02000000 0 0xe0000000 + 0x02000000 0 0xe0000000 + 0 0x20000000 + + 0x01000000 0 0x00000000 + 0x01000000 0 0x00000000 + 0 0x00010000>; + }; + }; + + pci2: pcie@ffe202000 { + reg = <0xf 0xfe202000 0 0x1000>; + ranges = <0x02000000 0 0xe0000000 0xc 0x40000000 0 0x20000000 + 0x01000000 0 0x00000000 0xf 0xf8020000 0 0x00010000>; + pcie@0 { + ranges = <0x02000000 0 0xe0000000 + 0x02000000 0 0xe0000000 + 0 0x20000000 + + 0x01000000 0 0x00000000 + 0x01000000 0 0x00000000 + 0 0x00010000>; + }; + }; +}; + +/include/ "fsl/p2041si-post.dtsi" diff --git a/arch/powerpc/boot/dts/p3041ds.dts b/arch/powerpc/boot/dts/p3041ds.dts new file mode 100644 index 000000000..2192fe948 --- /dev/null +++ b/arch/powerpc/boot/dts/p3041ds.dts @@ -0,0 +1,272 @@ +/* + * P3041DS Device Tree Source + * + * Copyright 2010 - 2014 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +/include/ "fsl/p3041si-pre.dtsi" + +/ { + model = "fsl,P3041DS"; + compatible = "fsl,P3041DS"; + #address-cells = <2>; + #size-cells = <2>; + interrupt-parent = <&mpic>; + + memory { + device_type = "memory"; + }; + + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + bman_fbpr: bman-fbpr { + size = <0 0x1000000>; + alignment = <0 0x1000000>; + }; + }; + + dcsr: dcsr@f00000000 { + ranges = <0x00000000 0xf 0x00000000 0x01008000>; + }; + + bportals: bman-portals@ff4000000 { + ranges = <0x0 0xf 0xf4000000 0x200000>; + }; + + soc: soc@ffe000000 { + ranges = <0x00000000 0xf 0xfe000000 0x1000000>; + reg = <0xf 0xfe000000 0 0x00001000>; + spi@110000 { + flash@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "spansion,s25sl12801"; + reg = <0>; + spi-max-frequency = <35000000>; /* input clock */ + partition@u-boot { + label = "u-boot"; + reg = <0x00000000 0x00100000>; + read-only; + }; + partition@kernel { + label = "kernel"; + reg = <0x00100000 0x00500000>; + read-only; + }; + partition@dtb { + label = "dtb"; + reg = <0x00600000 0x00100000>; + read-only; + }; + partition@fs { + label = "file system"; + reg = <0x00700000 0x00900000>; + }; + }; + }; + + i2c@118100 { + eeprom@51 { + compatible = "at24,24c256"; + reg = <0x51>; + }; + eeprom@52 { + compatible = "at24,24c256"; + reg = <0x52>; + }; + }; + + i2c@119100 { + rtc@68 { + compatible = "dallas,ds3232"; + reg = <0x68>; + interrupts = <0x1 0x1 0 0>; + }; + ina220@40 { + compatible = "ti,ina220"; + reg = <0x40>; + shunt-resistor = <1000>; + }; + ina220@41 { + compatible = "ti,ina220"; + reg = <0x41>; + shunt-resistor = <1000>; + }; + ina220@44 { + compatible = "ti,ina220"; + reg = <0x44>; + shunt-resistor = <1000>; + }; + ina220@45 { + compatible = "ti,ina220"; + reg = <0x45>; + shunt-resistor = <1000>; + }; + adt7461@4c { + compatible = "adi,adt7461"; + reg = <0x4c>; + }; + }; + }; + + rio: rapidio@ffe0c0000 { + reg = <0xf 0xfe0c0000 0 0x11000>; + + port1 { + ranges = <0 0 0xc 0x20000000 0 0x10000000>; + }; + port2 { + ranges = <0 0 0xc 0x30000000 0 0x10000000>; + }; + }; + + lbc: localbus@ffe124000 { + reg = <0xf 0xfe124000 0 0x1000>; + ranges = <0 0 0xf 0xe8000000 0x08000000 + 2 0 0xf 0xffa00000 0x00040000 + 3 0 0xf 0xffdf0000 0x00008000>; + + flash@0,0 { + compatible = "cfi-flash"; + reg = <0 0 0x08000000>; + bank-width = <2>; + device-width = <2>; + }; + + nand@2,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,elbc-fcm-nand"; + reg = <0x2 0x0 0x40000>; + + partition@0 { + label = "NAND U-Boot Image"; + reg = <0x0 0x02000000>; + read-only; + }; + + partition@2000000 { + label = "NAND Root File System"; + reg = <0x02000000 0x10000000>; + }; + + partition@12000000 { + label = "NAND Compressed RFS Image"; + reg = <0x12000000 0x08000000>; + }; + + partition@1a000000 { + label = "NAND Linux Kernel Image"; + reg = <0x1a000000 0x04000000>; + }; + + partition@1e000000 { + label = "NAND DTB Image"; + reg = <0x1e000000 0x01000000>; + }; + + partition@1f000000 { + label = "NAND Writable User area"; + reg = <0x1f000000 0x21000000>; + }; + }; + + board-control@3,0 { + compatible = "fsl,p3041ds-fpga", "fsl,fpga-ngpixis"; + reg = <3 0 0x30>; + }; + }; + + pci0: pcie@ffe200000 { + reg = <0xf 0xfe200000 0 0x1000>; + ranges = <0x02000000 0 0xe0000000 0xc 0x00000000 0x0 0x20000000 + 0x01000000 0 0x00000000 0xf 0xf8000000 0x0 0x00010000>; + pcie@0 { + ranges = <0x02000000 0 0xe0000000 + 0x02000000 0 0xe0000000 + 0 0x20000000 + + 0x01000000 0 0x00000000 + 0x01000000 0 0x00000000 + 0 0x00010000>; + }; + }; + + pci1: pcie@ffe201000 { + reg = <0xf 0xfe201000 0 0x1000>; + ranges = <0x02000000 0x0 0xe0000000 0xc 0x20000000 0x0 0x20000000 + 0x01000000 0x0 0x00000000 0xf 0xf8010000 0x0 0x00010000>; + pcie@0 { + ranges = <0x02000000 0 0xe0000000 + 0x02000000 0 0xe0000000 + 0 0x20000000 + + 0x01000000 0 0x00000000 + 0x01000000 0 0x00000000 + 0 0x00010000>; + }; + }; + + pci2: pcie@ffe202000 { + reg = <0xf 0xfe202000 0 0x1000>; + ranges = <0x02000000 0 0xe0000000 0xc 0x40000000 0 0x20000000 + 0x01000000 0 0x00000000 0xf 0xf8020000 0 0x00010000>; + pcie@0 { + ranges = <0x02000000 0 0xe0000000 + 0x02000000 0 0xe0000000 + 0 0x20000000 + + 0x01000000 0 0x00000000 + 0x01000000 0 0x00000000 + 0 0x00010000>; + }; + }; + + pci3: pcie@ffe203000 { + reg = <0xf 0xfe203000 0 0x1000>; + ranges = <0x02000000 0 0xe0000000 0xc 0x60000000 0 0x20000000 + 0x01000000 0 0x00000000 0xf 0xf8030000 0 0x00010000>; + pcie@0 { + ranges = <0x02000000 0 0xe0000000 + 0x02000000 0 0xe0000000 + 0 0x20000000 + + 0x01000000 0 0x00000000 + 0x01000000 0 0x00000000 + 0 0x00010000>; + }; + }; +}; + +/include/ "fsl/p3041si-post.dtsi" diff --git a/arch/powerpc/boot/dts/p4080ds.dts b/arch/powerpc/boot/dts/p4080ds.dts new file mode 100644 index 000000000..fad441654 --- /dev/null +++ b/arch/powerpc/boot/dts/p4080ds.dts @@ -0,0 +1,206 @@ +/* + * P4080DS Device Tree Source + * + * Copyright 2009 - 2014 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +/include/ "fsl/p4080si-pre.dtsi" + +/ { + model = "fsl,P4080DS"; + compatible = "fsl,P4080DS"; + #address-cells = <2>; + #size-cells = <2>; + interrupt-parent = <&mpic>; + + memory { + device_type = "memory"; + }; + + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + bman_fbpr: bman-fbpr { + size = <0 0x1000000>; + alignment = <0 0x1000000>; + }; + }; + + dcsr: dcsr@f00000000 { + ranges = <0x00000000 0xf 0x00000000 0x01008000>; + }; + + bportals: bman-portals@ff4000000 { + ranges = <0x0 0xf 0xf4000000 0x200000>; + }; + + soc: soc@ffe000000 { + ranges = <0x00000000 0xf 0xfe000000 0x1000000>; + reg = <0xf 0xfe000000 0 0x00001000>; + + spi@110000 { + flash@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "spansion,s25sl12801"; + reg = <0>; + spi-max-frequency = <40000000>; /* input clock */ + partition@u-boot { + label = "u-boot"; + reg = <0x00000000 0x00100000>; + read-only; + }; + partition@kernel { + label = "kernel"; + reg = <0x00100000 0x00500000>; + read-only; + }; + partition@dtb { + label = "dtb"; + reg = <0x00600000 0x00100000>; + read-only; + }; + partition@fs { + label = "file system"; + reg = <0x00700000 0x00900000>; + }; + }; + }; + + i2c@118100 { + eeprom@51 { + compatible = "at24,24c256"; + reg = <0x51>; + }; + eeprom@52 { + compatible = "at24,24c256"; + reg = <0x52>; + }; + rtc@68 { + compatible = "dallas,ds3232"; + reg = <0x68>; + interrupts = <0x1 0x1 0 0>; + }; + adt7461@4c { + compatible = "adi,adt7461"; + reg = <0x4c>; + }; + }; + + usb0: usb@210000 { + phy_type = "ulpi"; + }; + + usb1: usb@211000 { + dr_mode = "host"; + phy_type = "ulpi"; + }; + }; + + rio: rapidio@ffe0c0000 { + reg = <0xf 0xfe0c0000 0 0x11000>; + + port1 { + ranges = <0 0 0xc 0x20000000 0 0x10000000>; + }; + port2 { + ranges = <0 0 0xc 0x30000000 0 0x10000000>; + }; + }; + + lbc: localbus@ffe124000 { + reg = <0xf 0xfe124000 0 0x1000>; + ranges = <0 0 0xf 0xe8000000 0x08000000 + 3 0 0xf 0xffdf0000 0x00008000>; + + flash@0,0 { + compatible = "cfi-flash"; + reg = <0 0 0x08000000>; + bank-width = <2>; + device-width = <2>; + }; + + board-control@3,0 { + compatible = "fsl,p4080ds-fpga", "fsl,fpga-ngpixis"; + reg = <3 0 0x30>; + }; + }; + + pci0: pcie@ffe200000 { + reg = <0xf 0xfe200000 0 0x1000>; + ranges = <0x02000000 0 0xe0000000 0xc 0x00000000 0x0 0x20000000 + 0x01000000 0 0x00000000 0xf 0xf8000000 0x0 0x00010000>; + pcie@0 { + ranges = <0x02000000 0 0xe0000000 + 0x02000000 0 0xe0000000 + 0 0x20000000 + + 0x01000000 0 0x00000000 + 0x01000000 0 0x00000000 + 0 0x00010000>; + }; + }; + + pci1: pcie@ffe201000 { + reg = <0xf 0xfe201000 0 0x1000>; + ranges = <0x02000000 0x0 0xe0000000 0xc 0x20000000 0x0 0x20000000 + 0x01000000 0x0 0x00000000 0xf 0xf8010000 0x0 0x00010000>; + pcie@0 { + ranges = <0x02000000 0 0xe0000000 + 0x02000000 0 0xe0000000 + 0 0x20000000 + + 0x01000000 0 0x00000000 + 0x01000000 0 0x00000000 + 0 0x00010000>; + }; + }; + + pci2: pcie@ffe202000 { + reg = <0xf 0xfe202000 0 0x1000>; + ranges = <0x02000000 0 0xe0000000 0xc 0x40000000 0 0x20000000 + 0x01000000 0 0x00000000 0xf 0xf8020000 0 0x00010000>; + pcie@0 { + ranges = <0x02000000 0 0xe0000000 + 0x02000000 0 0xe0000000 + 0 0x20000000 + + 0x01000000 0 0x00000000 + 0x01000000 0 0x00000000 + 0 0x00010000>; + }; + }; + +}; + +/include/ "fsl/p4080si-post.dtsi" diff --git a/arch/powerpc/boot/dts/p5020ds.dts b/arch/powerpc/boot/dts/p5020ds.dts new file mode 100644 index 000000000..7382636dc --- /dev/null +++ b/arch/powerpc/boot/dts/p5020ds.dts @@ -0,0 +1,272 @@ +/* + * P5020DS Device Tree Source + * + * Copyright 2010 - 2014 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +/include/ "fsl/p5020si-pre.dtsi" + +/ { + model = "fsl,P5020DS"; + compatible = "fsl,P5020DS"; + #address-cells = <2>; + #size-cells = <2>; + interrupt-parent = <&mpic>; + + memory { + device_type = "memory"; + }; + + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + bman_fbpr: bman-fbpr { + size = <0 0x1000000>; + alignment = <0 0x1000000>; + }; + }; + + dcsr: dcsr@f00000000 { + ranges = <0x00000000 0xf 0x00000000 0x01008000>; + }; + + bportals: bman-portals@ff4000000 { + ranges = <0x0 0xf 0xf4000000 0x200000>; + }; + + soc: soc@ffe000000 { + ranges = <0x00000000 0xf 0xfe000000 0x1000000>; + reg = <0xf 0xfe000000 0 0x00001000>; + spi@110000 { + flash@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "spansion,s25sl12801"; + reg = <0>; + spi-max-frequency = <40000000>; /* input clock */ + partition@u-boot { + label = "u-boot"; + reg = <0x00000000 0x00100000>; + read-only; + }; + partition@kernel { + label = "kernel"; + reg = <0x00100000 0x00500000>; + read-only; + }; + partition@dtb { + label = "dtb"; + reg = <0x00600000 0x00100000>; + read-only; + }; + partition@fs { + label = "file system"; + reg = <0x00700000 0x00900000>; + }; + }; + }; + + i2c@118100 { + eeprom@51 { + compatible = "at24,24c256"; + reg = <0x51>; + }; + eeprom@52 { + compatible = "at24,24c256"; + reg = <0x52>; + }; + }; + + i2c@119100 { + rtc@68 { + compatible = "dallas,ds3232"; + reg = <0x68>; + interrupts = <0x1 0x1 0 0>; + }; + ina220@40 { + compatible = "ti,ina220"; + reg = <0x40>; + shunt-resistor = <1000>; + }; + ina220@41 { + compatible = "ti,ina220"; + reg = <0x41>; + shunt-resistor = <1000>; + }; + ina220@44 { + compatible = "ti,ina220"; + reg = <0x44>; + shunt-resistor = <1000>; + }; + ina220@45 { + compatible = "ti,ina220"; + reg = <0x45>; + shunt-resistor = <1000>; + }; + adt7461@4c { + compatible = "adi,adt7461"; + reg = <0x4c>; + }; + }; + }; + + rio: rapidio@ffe0c0000 { + reg = <0xf 0xfe0c0000 0 0x11000>; + + port1 { + ranges = <0 0 0xc 0x20000000 0 0x10000000>; + }; + port2 { + ranges = <0 0 0xc 0x30000000 0 0x10000000>; + }; + }; + + lbc: localbus@ffe124000 { + reg = <0xf 0xfe124000 0 0x1000>; + ranges = <0 0 0xf 0xe8000000 0x08000000 + 2 0 0xf 0xffa00000 0x00040000 + 3 0 0xf 0xffdf0000 0x00008000>; + + flash@0,0 { + compatible = "cfi-flash"; + reg = <0 0 0x08000000>; + bank-width = <2>; + device-width = <2>; + }; + + nand@2,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,elbc-fcm-nand"; + reg = <0x2 0x0 0x40000>; + + partition@0 { + label = "NAND U-Boot Image"; + reg = <0x0 0x02000000>; + read-only; + }; + + partition@2000000 { + label = "NAND Root File System"; + reg = <0x02000000 0x10000000>; + }; + + partition@12000000 { + label = "NAND Compressed RFS Image"; + reg = <0x12000000 0x08000000>; + }; + + partition@1a000000 { + label = "NAND Linux Kernel Image"; + reg = <0x1a000000 0x04000000>; + }; + + partition@1e000000 { + label = "NAND DTB Image"; + reg = <0x1e000000 0x01000000>; + }; + + partition@1f000000 { + label = "NAND Writable User area"; + reg = <0x1f000000 0x21000000>; + }; + }; + + board-control@3,0 { + compatible = "fsl,p5020ds-fpga", "fsl,fpga-ngpixis"; + reg = <3 0 0x30>; + }; + }; + + pci0: pcie@ffe200000 { + reg = <0xf 0xfe200000 0 0x1000>; + ranges = <0x02000000 0 0xe0000000 0xc 0x00000000 0x0 0x20000000 + 0x01000000 0 0x00000000 0xf 0xf8000000 0x0 0x00010000>; + pcie@0 { + ranges = <0x02000000 0 0xe0000000 + 0x02000000 0 0xe0000000 + 0 0x20000000 + + 0x01000000 0 0x00000000 + 0x01000000 0 0x00000000 + 0 0x00010000>; + }; + }; + + pci1: pcie@ffe201000 { + reg = <0xf 0xfe201000 0 0x1000>; + ranges = <0x02000000 0x0 0xe0000000 0xc 0x20000000 0x0 0x20000000 + 0x01000000 0x0 0x00000000 0xf 0xf8010000 0x0 0x00010000>; + pcie@0 { + ranges = <0x02000000 0 0xe0000000 + 0x02000000 0 0xe0000000 + 0 0x20000000 + + 0x01000000 0 0x00000000 + 0x01000000 0 0x00000000 + 0 0x00010000>; + }; + }; + + pci2: pcie@ffe202000 { + reg = <0xf 0xfe202000 0 0x1000>; + ranges = <0x02000000 0 0xe0000000 0xc 0x40000000 0 0x20000000 + 0x01000000 0 0x00000000 0xf 0xf8020000 0 0x00010000>; + pcie@0 { + ranges = <0x02000000 0 0xe0000000 + 0x02000000 0 0xe0000000 + 0 0x20000000 + + 0x01000000 0 0x00000000 + 0x01000000 0 0x00000000 + 0 0x00010000>; + }; + }; + + pci3: pcie@ffe203000 { + reg = <0xf 0xfe203000 0 0x1000>; + ranges = <0x02000000 0 0xe0000000 0xc 0x60000000 0 0x20000000 + 0x01000000 0 0x00000000 0xf 0xf8030000 0 0x00010000>; + pcie@0 { + ranges = <0x02000000 0 0xe0000000 + 0x02000000 0 0xe0000000 + 0 0x20000000 + + 0x01000000 0 0x00000000 + 0x01000000 0 0x00000000 + 0 0x00010000>; + }; + }; +}; + +/include/ "fsl/p5020si-post.dtsi" diff --git a/arch/powerpc/boot/dts/p5040ds.dts b/arch/powerpc/boot/dts/p5040ds.dts new file mode 100644 index 000000000..35dabf5b6 --- /dev/null +++ b/arch/powerpc/boot/dts/p5040ds.dts @@ -0,0 +1,242 @@ +/* + * P5040DS Device Tree Source + * + * Copyright 2012 - 2014 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * This software is provided by Freescale Semiconductor "as is" and any + * express or implied warranties, including, but not limited to, the implied + * warranties of merchantability and fitness for a particular purpose are + * disclaimed. In no event shall Freescale Semiconductor be liable for any + * direct, indirect, incidental, special, exemplary, or consequential damages + * (including, but not limited to, procurement of substitute goods or services; + * loss of use, data, or profits; or business interruption) however caused and + * on any theory of liability, whether in contract, strict liability, or tort + * (including negligence or otherwise) arising in any way out of the use of this + * software, even if advised of the possibility of such damage. + */ + +/include/ "fsl/p5040si-pre.dtsi" + +/ { + model = "fsl,P5040DS"; + compatible = "fsl,P5040DS"; + #address-cells = <2>; + #size-cells = <2>; + interrupt-parent = <&mpic>; + + memory { + device_type = "memory"; + }; + + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + bman_fbpr: bman-fbpr { + size = <0 0x1000000>; + alignment = <0 0x1000000>; + }; + }; + + dcsr: dcsr@f00000000 { + ranges = <0x00000000 0xf 0x00000000 0x01008000>; + }; + + bportals: bman-portals@ff4000000 { + ranges = <0x0 0xf 0xf4000000 0x200000>; + }; + + soc: soc@ffe000000 { + ranges = <0x00000000 0xf 0xfe000000 0x1000000>; + reg = <0xf 0xfe000000 0 0x00001000>; + spi@110000 { + flash@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "spansion,s25sl12801"; + reg = <0>; + spi-max-frequency = <40000000>; /* input clock */ + partition@u-boot { + label = "u-boot"; + reg = <0x00000000 0x00100000>; + }; + partition@kernel { + label = "kernel"; + reg = <0x00100000 0x00500000>; + }; + partition@dtb { + label = "dtb"; + reg = <0x00600000 0x00100000>; + }; + partition@fs { + label = "file system"; + reg = <0x00700000 0x00900000>; + }; + }; + }; + + i2c@118100 { + eeprom@51 { + compatible = "at24,24c256"; + reg = <0x51>; + }; + eeprom@52 { + compatible = "at24,24c256"; + reg = <0x52>; + }; + }; + + i2c@119100 { + rtc@68 { + compatible = "dallas,ds3232"; + reg = <0x68>; + interrupts = <0x1 0x1 0 0>; + }; + ina220@40 { + compatible = "ti,ina220"; + reg = <0x40>; + shunt-resistor = <1000>; + }; + ina220@41 { + compatible = "ti,ina220"; + reg = <0x41>; + shunt-resistor = <1000>; + }; + ina220@44 { + compatible = "ti,ina220"; + reg = <0x44>; + shunt-resistor = <1000>; + }; + ina220@45 { + compatible = "ti,ina220"; + reg = <0x45>; + shunt-resistor = <1000>; + }; + adt7461@4c { + compatible = "adi,adt7461"; + reg = <0x4c>; + }; + }; + }; + + lbc: localbus@ffe124000 { + reg = <0xf 0xfe124000 0 0x1000>; + ranges = <0 0 0xf 0xe8000000 0x08000000 + 2 0 0xf 0xffa00000 0x00040000 + 3 0 0xf 0xffdf0000 0x00008000>; + + flash@0,0 { + compatible = "cfi-flash"; + reg = <0 0 0x08000000>; + bank-width = <2>; + device-width = <2>; + }; + + nand@2,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,elbc-fcm-nand"; + reg = <0x2 0x0 0x40000>; + + partition@0 { + label = "NAND U-Boot Image"; + reg = <0x0 0x02000000>; + }; + + partition@2000000 { + label = "NAND Root File System"; + reg = <0x02000000 0x10000000>; + }; + + partition@12000000 { + label = "NAND Compressed RFS Image"; + reg = <0x12000000 0x08000000>; + }; + + partition@1a000000 { + label = "NAND Linux Kernel Image"; + reg = <0x1a000000 0x04000000>; + }; + + partition@1e000000 { + label = "NAND DTB Image"; + reg = <0x1e000000 0x01000000>; + }; + + partition@1f000000 { + label = "NAND Writable User area"; + reg = <0x1f000000 0x01000000>; + }; + }; + + board-control@3,0 { + compatible = "fsl,p5040ds-fpga", "fsl,fpga-ngpixis"; + reg = <3 0 0x40>; + }; + }; + + pci0: pcie@ffe200000 { + reg = <0xf 0xfe200000 0 0x1000>; + ranges = <0x02000000 0 0xe0000000 0xc 0x00000000 0x0 0x20000000 + 0x01000000 0 0x00000000 0xf 0xf8000000 0x0 0x00010000>; + pcie@0 { + ranges = <0x02000000 0 0xe0000000 + 0x02000000 0 0xe0000000 + 0 0x20000000 + + 0x01000000 0 0x00000000 + 0x01000000 0 0x00000000 + 0 0x00010000>; + }; + }; + + pci1: pcie@ffe201000 { + reg = <0xf 0xfe201000 0 0x1000>; + ranges = <0x02000000 0x0 0xe0000000 0xc 0x20000000 0x0 0x20000000 + 0x01000000 0x0 0x00000000 0xf 0xf8010000 0x0 0x00010000>; + pcie@0 { + ranges = <0x02000000 0 0xe0000000 + 0x02000000 0 0xe0000000 + 0 0x20000000 + + 0x01000000 0 0x00000000 + 0x01000000 0 0x00000000 + 0 0x00010000>; + }; + }; + + pci2: pcie@ffe202000 { + reg = <0xf 0xfe202000 0 0x1000>; + ranges = <0x02000000 0 0xe0000000 0xc 0x40000000 0 0x20000000 + 0x01000000 0 0x00000000 0xf 0xf8020000 0 0x00010000>; + pcie@0 { + ranges = <0x02000000 0 0xe0000000 + 0x02000000 0 0xe0000000 + 0 0x20000000 + + 0x01000000 0 0x00000000 + 0x01000000 0 0x00000000 + 0 0x00010000>; + }; + }; +}; + +/include/ "fsl/p5040si-post.dtsi" diff --git a/arch/powerpc/boot/dts/pcm030.dts b/arch/powerpc/boot/dts/pcm030.dts new file mode 100644 index 000000000..192e66af0 --- /dev/null +++ b/arch/powerpc/boot/dts/pcm030.dts @@ -0,0 +1,110 @@ +/* + * phyCORE-MPC5200B-tiny (pcm030) board Device Tree Source + * + * Copyright 2006 Pengutronix + * Sascha Hauer <s.hauer@pengutronix.de> + * Copyright 2007 Pengutronix + * Juergen Beisert <j.beisert@pengutronix.de> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +/include/ "mpc5200b.dtsi" + +&gpt0 { fsl,has-wdt; }; +&gpt2 { gpio-controller; }; +&gpt3 { gpio-controller; }; +&gpt4 { gpio-controller; }; +&gpt5 { gpio-controller; }; +&gpt6 { gpio-controller; }; +&gpt7 { gpio-controller; }; + +/ { + model = "phytec,pcm030"; + compatible = "phytec,pcm030"; + + soc5200@f0000000 { + audioplatform: psc@2000 { /* PSC1 in ac97 mode */ + compatible = "mpc5200b-psc-ac97","fsl,mpc5200b-psc-ac97"; + cell-index = <0>; + }; + + /* PSC2 port is used by CAN1/2 */ + psc@2200 { + status = "disabled"; + }; + + psc@2400 { /* PSC3 in UART mode */ + compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart"; + }; + + /* PSC4 is ??? */ + psc@2600 { + status = "disabled"; + }; + + /* PSC5 is ??? */ + psc@2800 { + status = "disabled"; + }; + + psc@2c00 { /* PSC6 in UART mode */ + compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart"; + }; + + ethernet@3000 { + phy-handle = <&phy0>; + }; + + mdio@3000 { + phy0: ethernet-phy@0 { + reg = <0>; + }; + }; + + i2c@3d40 { + rtc@51 { + compatible = "nxp,pcf8563"; + reg = <0x51>; + }; + eeprom@52 { + compatible = "catalyst,24c32"; + reg = <0x52>; + pagesize = <32>; + }; + }; + + sram@8000 { + compatible = "fsl,mpc5200b-sram","fsl,mpc5200-sram"; + reg = <0x8000 0x4000>; + }; + }; + + pci@f0000d00 { + interrupt-map-mask = <0xf800 0 0 7>; + interrupt-map = <0xc000 0 0 1 &mpc5200_pic 0 0 3 // 1st slot + 0xc000 0 0 2 &mpc5200_pic 1 1 3 + 0xc000 0 0 3 &mpc5200_pic 1 2 3 + 0xc000 0 0 4 &mpc5200_pic 1 3 3 + + 0xc800 0 0 1 &mpc5200_pic 1 1 3 // 2nd slot + 0xc800 0 0 2 &mpc5200_pic 1 2 3 + 0xc800 0 0 3 &mpc5200_pic 1 3 3 + 0xc800 0 0 4 &mpc5200_pic 0 0 3>; + ranges = <0x42000000 0 0x80000000 0x80000000 0 0x20000000 + 0x02000000 0 0xa0000000 0xa0000000 0 0x10000000 + 0x01000000 0 0x00000000 0xb0000000 0 0x01000000>; + }; + + localbus { + status = "disabled"; + }; + + sound { + compatible = "phytec,pcm030-audio-fabric"; + asoc-platform = <&audioplatform>; + }; +}; diff --git a/arch/powerpc/boot/dts/pcm032.dts b/arch/powerpc/boot/dts/pcm032.dts new file mode 100644 index 000000000..96b139bf5 --- /dev/null +++ b/arch/powerpc/boot/dts/pcm032.dts @@ -0,0 +1,189 @@ +/* + * phyCORE-MPC5200B-IO (pcm032) board Device Tree Source + * + * Copyright (C) 2006-2009 Pengutronix + * Sascha Hauer <s.hauer@pengutronix.de> + * Juergen Beisert <j.beisert@pengutronix.de> + * Wolfram Sang <w.sang@pengutronix.de> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +/include/ "mpc5200b.dtsi" + +&gpt0 { fsl,has-wdt; }; +&gpt2 { gpio-controller; }; +&gpt3 { gpio-controller; }; +&gpt4 { gpio-controller; }; +&gpt5 { gpio-controller; }; +&gpt6 { gpio-controller; }; +&gpt7 { gpio-controller; }; + +/ { + model = "phytec,pcm032"; + compatible = "phytec,pcm032"; + + memory { + reg = <0x00000000 0x08000000>; // 128MB + }; + + soc5200@f0000000 { + psc@2000 { /* PSC1 is ac97 */ + compatible = "fsl,mpc5200b-psc-ac97","fsl,mpc5200-psc-ac97"; + cell-index = <0>; + }; + + /* PSC2 port is used by CAN1/2 */ + psc@2200 { + status = "disabled"; + }; + + psc@2400 { /* PSC3 in UART mode */ + compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart"; + }; + + /* PSC4 is ??? */ + psc@2600 { + status = "disabled"; + }; + + /* PSC5 is ??? */ + psc@2800 { + status = "disabled"; + }; + + psc@2c00 { /* PSC6 in UART mode */ + compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart"; + }; + + ethernet@3000 { + phy-handle = <&phy0>; + }; + + mdio@3000 { + phy0: ethernet-phy@0 { + reg = <0>; + }; + }; + + i2c@3d40 { + rtc@51 { + compatible = "nxp,pcf8563"; + reg = <0x51>; + }; + eeprom@52 { + compatible = "catalyst,24c32"; + reg = <0x52>; + pagesize = <32>; + }; + }; + }; + + pci@f0000d00 { + interrupt-map-mask = <0xf800 0 0 7>; + interrupt-map = <0xc000 0 0 1 &mpc5200_pic 0 0 3 // 1st slot + 0xc000 0 0 2 &mpc5200_pic 1 1 3 + 0xc000 0 0 3 &mpc5200_pic 1 2 3 + 0xc000 0 0 4 &mpc5200_pic 1 3 3 + + 0xc800 0 0 1 &mpc5200_pic 1 1 3 // 2nd slot + 0xc800 0 0 2 &mpc5200_pic 1 2 3 + 0xc800 0 0 3 &mpc5200_pic 1 3 3 + 0xc800 0 0 4 &mpc5200_pic 0 0 3>; + ranges = <0x42000000 0 0x80000000 0x80000000 0 0x20000000 + 0x02000000 0 0xa0000000 0xa0000000 0 0x10000000 + 0x01000000 0 0x00000000 0xb0000000 0 0x01000000>; + }; + + localbus { + ranges = <0 0 0xfe000000 0x02000000 + 1 0 0xfc000000 0x02000000 + 2 0 0xfbe00000 0x00200000 + 3 0 0xf9e00000 0x02000000 + 4 0 0xf7e00000 0x02000000 + 5 0 0xe6000000 0x02000000 + 6 0 0xe8000000 0x02000000 + 7 0 0xea000000 0x02000000>; + + flash@0,0 { + compatible = "cfi-flash"; + reg = <0 0 0x02000000>; + bank-width = <4>; + #size-cells = <1>; + #address-cells = <1>; + + partition@0 { + label = "ubootl"; + reg = <0x00000000 0x00040000>; + }; + partition@40000 { + label = "kernel"; + reg = <0x00040000 0x001c0000>; + }; + partition@200000 { + label = "jffs2"; + reg = <0x00200000 0x01d00000>; + }; + partition@1f00000 { + label = "uboot"; + reg = <0x01f00000 0x00040000>; + }; + partition@1f40000 { + label = "env"; + reg = <0x01f40000 0x00040000>; + }; + partition@1f80000 { + label = "oftree"; + reg = <0x01f80000 0x00040000>; + }; + partition@1fc0000 { + label = "space"; + reg = <0x01fc0000 0x00040000>; + }; + }; + + sram@2,0 { + compatible = "mtd-ram"; + reg = <2 0 0x00200000>; + bank-width = <2>; + }; + + /* + * example snippets for FPGA + * + * fpga@3,0 { + * compatible = "fpga_driver"; + * reg = <3 0 0x02000000>; + * bank-width = <4>; + * }; + * + * fpga@4,0 { + * compatible = "fpga_driver"; + * reg = <4 0 0x02000000>; + * bank-width = <4>; + * }; + */ + + /* + * example snippets for free chipselects + * + * device@5,0 { + * compatible = "custom_driver"; + * reg = <5 0 0x02000000>; + * }; + * + * device@6,0 { + * compatible = "custom_driver"; + * reg = <6 0 0x02000000>; + * }; + * + * device@7,0 { + * compatible = "custom_driver"; + * reg = <7 0 0x02000000>; + * }; + */ + }; +}; diff --git a/arch/powerpc/boot/dts/pdm360ng.dts b/arch/powerpc/boot/dts/pdm360ng.dts new file mode 100644 index 000000000..871c16d1a --- /dev/null +++ b/arch/powerpc/boot/dts/pdm360ng.dts @@ -0,0 +1,199 @@ +/* + * Device Tree Source for IFM PDM360NG. + * + * Copyright 2009 - 2010 DENX Software Engineering. + * Anatolij Gustschin <agust@denx.de> + * + * Based on MPC5121E ADS dts. + * Copyright 2008 Freescale Semiconductor Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#include <mpc5121.dtsi> + +/ { + model = "pdm360ng"; + compatible = "ifm,pdm360ng", "fsl,mpc5121"; + #address-cells = <1>; + #size-cells = <1>; + interrupt-parent = <&ipic>; + + memory { + device_type = "memory"; + reg = <0x00000000 0x20000000>; // 512MB at 0 + }; + + nfc@40000000 { + bank-width = <0x1>; + chips = <0x1>; + + partition@0 { + label = "nand0"; + reg = <0x0 0x40000000>; + }; + }; + + localbus@80000020 { + ranges = <0x0 0x0 0xf0000000 0x10000000 /* Flash */ + 0x2 0x0 0x50040000 0x00020000>; /* CS2: MRAM */ + + flash@0,0 { + compatible = "amd,s29gl01gp", "cfi-flash"; + reg = <0 0x00000000 0x08000000 + 0 0x08000000 0x08000000>; + #address-cells = <1>; + #size-cells = <1>; + bank-width = <4>; + device-width = <2>; + + partition@0 { + label = "u-boot"; + reg = <0x00000000 0x00080000>; + read-only; + }; + partition@80000 { + label = "environment"; + reg = <0x00080000 0x00080000>; + read-only; + }; + partition@100000 { + label = "splash-image"; + reg = <0x00100000 0x00080000>; + read-only; + }; + partition@180000 { + label = "device-tree"; + reg = <0x00180000 0x00040000>; + }; + partition@1c0000 { + label = "kernel"; + reg = <0x001c0000 0x00500000>; + }; + partition@6c0000 { + label = "filesystem"; + reg = <0x006c0000 0x07940000>; + }; + }; + + mram0@2,0 { + compatible = "mtd-ram"; + reg = <2 0x00000 0x10000>; + bank-width = <2>; + }; + + mram1@2,10000 { + compatible = "mtd-ram"; + reg = <2 0x010000 0x10000>; + bank-width = <2>; + }; + }; + + soc@80000000 { + + i2c@1700 { + fsl,preserve-clocking; + + eeprom@50 { + compatible = "at,24c01"; + reg = <0x50>; + }; + + rtc@68 { + compatible = "stm,m41t00"; + reg = <0x68>; + }; + }; + + i2c@1720 { + status = "disabled"; + }; + + i2c@1740 { + fsl,preserve-clocking; + }; + + ethernet@2800 { + phy-handle = <&phy0>; + }; + + mdio@2800 { + phy0: ethernet-phy@1f { + compatible = "smsc,lan8700"; + reg = <0x1f>; + }; + }; + + /* USB1 using external ULPI PHY */ + usb@3000 { + dr_mode = "host"; + }; + + /* USB0 using internal UTMI PHY */ + usb@4000 { + fsl,invert-pwr-fault; + }; + + psc@11000 { + compatible = "fsl,mpc5121-psc-uart", "fsl,mpc5121-psc"; + }; + + psc@11100 { + compatible = "fsl,mpc5121-psc-uart", "fsl,mpc5121-psc"; + }; + + psc@11200 { + compatible = "fsl,mpc5121-psc-uart", "fsl,mpc5121-psc"; + }; + + psc@11300 { + compatible = "fsl,mpc5121-psc-uart", "fsl,mpc5121-psc"; + }; + + psc@11400 { + compatible = "fsl,mpc5121-psc-uart", "fsl,mpc5121-psc"; + }; + + psc@11500 { + status = "disabled"; + }; + + psc@11600 { + compatible = "fsl,mpc5121-psc-uart", "fsl,mpc5121-psc"; + }; + + psc@11700 { + status = "disabled"; + }; + + psc@11800 { + compatible = "fsl,mpc5121-psc-uart", "fsl,mpc5121-psc"; + }; + + psc@11900 { + compatible = "fsl,mpc5121-psc-spi", "fsl,mpc5121-psc"; + #address-cells = <1>; + #size-cells = <0>; + + /* ADS7845 touch screen controller */ + ts@0 { + compatible = "ti,ads7846"; + reg = <0x0>; + spi-max-frequency = <3000000>; + /* pen irq is GPIO25 */ + interrupts = <78 0x8>; + }; + }; + + psc@11a00 { + status = "disabled"; + }; + + psc@11b00 { + compatible = "fsl,mpc5121-psc-uart", "fsl,mpc5121-psc"; + }; + }; +}; diff --git a/arch/powerpc/boot/dts/ppa8548.dts b/arch/powerpc/boot/dts/ppa8548.dts new file mode 100644 index 000000000..27b0699ee --- /dev/null +++ b/arch/powerpc/boot/dts/ppa8548.dts @@ -0,0 +1,164 @@ +/* + * PPA8548 Device Tree Source (36-bit address map) + * Copyright 2013 Prodrive B.V. + * + * Based on: + * MPC8548 CDS Device Tree Source (36-bit address map) + * Copyright 2012 Freescale Semiconductor Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +/include/ "fsl/mpc8548si-pre.dtsi" + +/ { + model = "ppa8548"; + compatible = "ppa8548"; + #address-cells = <2>; + #size-cells = <2>; + interrupt-parent = <&mpic>; + + memory { + device_type = "memory"; + reg = <0 0 0x0 0x40000000>; + }; + + lbc: localbus@fe0005000 { + reg = <0xf 0xe0005000 0 0x1000>; + ranges = <0x0 0x0 0xf 0xff800000 0x00800000>; + }; + + soc: soc8548@fe0000000 { + ranges = <0 0xf 0xe0000000 0x100000>; + }; + + pci0: pci@fe0008000 { + /* ppa8548 board doesn't support PCI */ + status = "disabled"; + }; + + pci1: pci@fe0009000 { + /* ppa8548 board doesn't support PCI */ + status = "disabled"; + }; + + pci2: pcie@fe000a000 { + /* ppa8548 board doesn't support PCI */ + status = "disabled"; + }; + + rio: rapidio@fe00c0000 { + reg = <0xf 0xe00c0000 0x0 0x11000>; + port1 { + ranges = <0x0 0x0 0x0 0x80000000 0x0 0x40000000>; + }; + }; +}; + +&lbc { + nor@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "cfi-flash"; + reg = <0x0 0x0 0x00800000>; + bank-width = <2>; + device-width = <2>; + + partition@0 { + reg = <0x0 0x7A0000>; + label = "user"; + }; + + partition@7A0000 { + reg = <0x7A0000 0x20000>; + label = "env"; + read-only; + }; + + partition@7C0000 { + reg = <0x7C0000 0x40000>; + label = "u-boot"; + read-only; + }; + }; +}; + +&soc { + i2c@3000 { + rtc@6f { + compatible = "intersil,isl1208"; + reg = <0x6f>; + }; + }; + + i2c@3100 { + }; + + /* + * Only ethernet controller @25000 and @26000 are used. + * Use alias enet2 and enet3 for the remainig controllers, + * to stay compatible with mpc8548si-pre.dtsi. + */ + enet2: ethernet@24000 { + status = "disabled"; + }; + + mdio@24520 { + phy0: ethernet-phy@0 { + interrupts = <7 1 0 0>; + reg = <0x0>; + }; + phy1: ethernet-phy@1 { + interrupts = <8 1 0 0>; + reg = <0x1>; + }; + tbi0: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + + enet0: ethernet@25000 { + tbi-handle = <&tbi1>; + phy-handle = <&phy0>; + }; + + mdio@25520 { + tbi1: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + + enet1: ethernet@26000 { + tbi-handle = <&tbi2>; + phy-handle = <&phy1>; + }; + + mdio@26520 { + tbi2: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + + enet3: ethernet@27000 { + status = "disabled"; + }; + + mdio@27520 { + tbi3: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + + crypto@30000 { + status = "disabled"; + }; +}; + +/include/ "fsl/mpc8548si-post.dtsi" diff --git a/arch/powerpc/boot/dts/pq2fads.dts b/arch/powerpc/boot/dts/pq2fads.dts new file mode 100644 index 000000000..0c525ff0c --- /dev/null +++ b/arch/powerpc/boot/dts/pq2fads.dts @@ -0,0 +1,247 @@ +/* + * Device Tree for the PQ2FADS-ZU board with an MPC8280 chip. + * + * Copyright 2007,2008 Freescale Semiconductor Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +/dts-v1/; + +/ { + model = "pq2fads"; + compatible = "fsl,pq2fads"; + #address-cells = <1>; + #size-cells = <1>; + + aliases { + ethernet0 = &enet0; + ethernet1 = &enet1; + serial0 = &serial0; + serial1 = &serial1; + pci0 = &pci0; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu@0 { + device_type = "cpu"; + reg = <0x0>; + d-cache-line-size = <32>; + i-cache-line-size = <32>; + d-cache-size = <16384>; + i-cache-size = <16384>; + timebase-frequency = <0>; + clock-frequency = <0>; + }; + }; + + memory { + device_type = "memory"; + reg = <0x0 0x0>; + }; + + localbus@f0010100 { + compatible = "fsl,mpc8280-localbus", + "fsl,pq2-localbus"; + #address-cells = <2>; + #size-cells = <1>; + reg = <0xf0010100 0x60>; + + ranges = <0x0 0x0 0xff800000 0x800000 + 0x1 0x0 0xf4500000 0x8000 + 0x8 0x0 0xf8200000 0x8000>; + + flash@0,0 { + compatible = "jedec-flash"; + reg = <0x0 0x0 0x800000>; + bank-width = <4>; + device-width = <1>; + }; + + bcsr@1,0 { + reg = <0x1 0x0 0x20>; + compatible = "fsl,pq2fads-bcsr"; + }; + + PCI_PIC: pic@8,0 { + #interrupt-cells = <1>; + interrupt-controller; + reg = <0x8 0x0 0x8>; + compatible = "fsl,pq2ads-pci-pic"; + interrupt-parent = <&PIC>; + interrupts = <24 8>; + }; + }; + + pci0: pci@f0010800 { + device_type = "pci"; + reg = <0xf0010800 0x10c 0xf00101ac 0x8 0xf00101c4 0x8>; + compatible = "fsl,mpc8280-pci", "fsl,pq2-pci"; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + clock-frequency = <66000000>; + interrupt-map-mask = <0xf800 0x0 0x0 0x7>; + interrupt-map = < + /* IDSEL 0x16 */ + 0xb000 0x0 0x0 0x1 &PCI_PIC 0 + 0xb000 0x0 0x0 0x2 &PCI_PIC 1 + 0xb000 0x0 0x0 0x3 &PCI_PIC 2 + 0xb000 0x0 0x0 0x4 &PCI_PIC 3 + + /* IDSEL 0x17 */ + 0xb800 0x0 0x0 0x1 &PCI_PIC 4 + 0xb800 0x0 0x0 0x2 &PCI_PIC 5 + 0xb800 0x0 0x0 0x3 &PCI_PIC 6 + 0xb800 0x0 0x0 0x4 &PCI_PIC 7 + + /* IDSEL 0x18 */ + 0xc000 0x0 0x0 0x1 &PCI_PIC 8 + 0xc000 0x0 0x0 0x2 &PCI_PIC 9 + 0xc000 0x0 0x0 0x3 &PCI_PIC 10 + 0xc000 0x0 0x0 0x4 &PCI_PIC 11>; + + interrupt-parent = <&PIC>; + interrupts = <18 8>; + ranges = <0x42000000 0x0 0x80000000 0x80000000 0x0 0x20000000 + 0x2000000 0x0 0xa0000000 0xa0000000 0x0 0x20000000 + 0x1000000 0x0 0x0 0xf6000000 0x0 0x2000000>; + }; + + soc@f0000000 { + #address-cells = <1>; + #size-cells = <1>; + device_type = "soc"; + compatible = "fsl,mpc8280", "fsl,pq2-soc"; + ranges = <0x0 0xf0000000 0x53000>; + + // Temporary -- will go away once kernel uses ranges for get_immrbase(). + reg = <0xf0000000 0x53000>; + + cpm@119c0 { + #address-cells = <1>; + #size-cells = <1>; + #interrupt-cells = <2>; + compatible = "fsl,mpc8280-cpm", "fsl,cpm2"; + reg = <0x119c0 0x30>; + ranges; + + muram@0 { + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x0 0x10000>; + + data@0 { + compatible = "fsl,cpm-muram-data"; + reg = <0x0 0x2000 0x9800 0x800>; + }; + }; + + brg@119f0 { + compatible = "fsl,mpc8280-brg", + "fsl,cpm2-brg", + "fsl,cpm-brg"; + reg = <0x119f0 0x10 0x115f0 0x10>; + }; + + serial0: serial@11a00 { + device_type = "serial"; + compatible = "fsl,mpc8280-scc-uart", + "fsl,cpm2-scc-uart"; + reg = <0x11a00 0x20 0x8000 0x100>; + interrupts = <40 8>; + interrupt-parent = <&PIC>; + fsl,cpm-brg = <1>; + fsl,cpm-command = <0x800000>; + }; + + serial1: serial@11a20 { + device_type = "serial"; + compatible = "fsl,mpc8280-scc-uart", + "fsl,cpm2-scc-uart"; + reg = <0x11a20 0x20 0x8100 0x100>; + interrupts = <41 8>; + interrupt-parent = <&PIC>; + fsl,cpm-brg = <2>; + fsl,cpm-command = <0x4a00000>; + }; + + enet0: ethernet@11320 { + device_type = "network"; + compatible = "fsl,mpc8280-fcc-enet", + "fsl,cpm2-fcc-enet"; + reg = <0x11320 0x20 0x8500 0x100 0x113b0 0x1>; + interrupts = <33 8>; + interrupt-parent = <&PIC>; + phy-handle = <&PHY0>; + linux,network-index = <0>; + fsl,cpm-command = <0x16200300>; + }; + + enet1: ethernet@11340 { + device_type = "network"; + compatible = "fsl,mpc8280-fcc-enet", + "fsl,cpm2-fcc-enet"; + reg = <0x11340 0x20 0x8600 0x100 0x113d0 0x1>; + interrupts = <34 8>; + interrupt-parent = <&PIC>; + phy-handle = <&PHY1>; + linux,network-index = <1>; + fsl,cpm-command = <0x1a400300>; + local-mac-address = [00 e0 0c 00 79 01]; + }; + + mdio@10d40 { + compatible = "fsl,pq2fads-mdio-bitbang", + "fsl,mpc8280-mdio-bitbang", + "fsl,cpm2-mdio-bitbang"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x10d40 0x14>; + fsl,mdio-pin = <9>; + fsl,mdc-pin = <10>; + + PHY0: ethernet-phy@0 { + interrupt-parent = <&PIC>; + interrupts = <25 2>; + reg = <0x0>; + }; + + PHY1: ethernet-phy@1 { + interrupt-parent = <&PIC>; + interrupts = <25 2>; + reg = <0x3>; + }; + }; + + usb@11b60 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,mpc8280-usb", + "fsl,cpm2-usb"; + reg = <0x11b60 0x18 0x8b00 0x100>; + interrupt-parent = <&PIC>; + interrupts = <11 8>; + fsl,cpm-command = <0x2e600000>; + }; + }; + + PIC: interrupt-controller@10c00 { + #interrupt-cells = <2>; + interrupt-controller; + reg = <0x10c00 0x80>; + compatible = "fsl,mpc8280-pic", "fsl,cpm2-pic"; + }; + + }; + + chosen { + linux,stdout-path = "/soc/cpm/serial@11a00"; + }; +}; diff --git a/arch/powerpc/boot/dts/prpmc2800.dts b/arch/powerpc/boot/dts/prpmc2800.dts new file mode 100644 index 000000000..00afaacf8 --- /dev/null +++ b/arch/powerpc/boot/dts/prpmc2800.dts @@ -0,0 +1,297 @@ +/* Device Tree Source for Motorola PrPMC2800 + * + * Author: Mark A. Greer <mgreer@mvista.com> + * + * 2007 (c) MontaVista, Software, Inc. This file is licensed under + * the terms of the GNU General Public License version 2. This program + * is licensed "as is" without any warranty of any kind, whether express + * or implied. + * + * Property values that are labeled as "Default" will be updated by bootwrapper + * if it can determine the exact PrPMC type. + */ + +/dts-v1/; + +/ { + #address-cells = <1>; + #size-cells = <1>; + model = "PrPMC280/PrPMC2800"; /* Default */ + compatible = "motorola,PrPMC2800"; + coherency-off; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + PowerPC,7447 { + device_type = "cpu"; + reg = <0>; + clock-frequency = <733333333>; /* Default */ + bus-frequency = <133333333>; + timebase-frequency = <33333333>; + i-cache-line-size = <32>; + d-cache-line-size = <32>; + i-cache-size = <32768>; + d-cache-size = <32768>; + }; + }; + + memory { + device_type = "memory"; + reg = <0x0 0x20000000>; /* Default (512MB) */ + }; + + system-controller@f1000000 { /* Marvell Discovery mv64360 */ + #address-cells = <1>; + #size-cells = <1>; + model = "mv64360"; /* Default */ + compatible = "marvell,mv64360"; + clock-frequency = <133333333>; + reg = <0xf1000000 0x10000>; + virtual-reg = <0xf1000000>; + ranges = <0x88000000 0x88000000 0x1000000 /* PCI 0 I/O Space */ + 0x80000000 0x80000000 0x8000000 /* PCI 0 MEM Space */ + 0xa0000000 0xa0000000 0x4000000 /* User FLASH */ + 0x00000000 0xf1000000 0x0010000 /* Bridge's regs */ + 0xf2000000 0xf2000000 0x0040000>;/* Integrated SRAM */ + + flash@a0000000 { + device_type = "rom"; + compatible = "direct-mapped"; + reg = <0xa0000000 0x4000000>; /* Default (64MB) */ + probe-type = "CFI"; + bank-width = <4>; + partitions = <0x00000000 0x00100000 /* RO */ + 0x00100000 0x00040001 /* RW */ + 0x00140000 0x00400000 /* RO */ + 0x00540000 0x039c0000 /* RO */ + 0x03f00000 0x00100000>; /* RO */ + partition-names = "FW Image A", "FW Config Data", "Kernel Image", "Filesystem", "FW Image B"; + }; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + compatible = "marvell,mv64360-mdio"; + PHY0: ethernet-phy@1 { + compatible = "broadcom,bcm5421"; + interrupts = <76>; /* GPP 12 */ + interrupt-parent = <&PIC>; + reg = <1>; + }; + PHY1: ethernet-phy@3 { + compatible = "broadcom,bcm5421"; + interrupts = <76>; /* GPP 12 */ + interrupt-parent = <&PIC>; + reg = <3>; + }; + }; + + ethernet-group@2000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "marvell,mv64360-eth-group"; + reg = <0x2000 0x2000>; + ethernet@0 { + device_type = "network"; + compatible = "marvell,mv64360-eth"; + reg = <0>; + interrupts = <32>; + interrupt-parent = <&PIC>; + phy = <&PHY0>; + local-mac-address = [ 00 00 00 00 00 00 ]; + }; + ethernet@1 { + device_type = "network"; + compatible = "marvell,mv64360-eth"; + reg = <1>; + interrupts = <33>; + interrupt-parent = <&PIC>; + phy = <&PHY1>; + local-mac-address = [ 00 00 00 00 00 00 ]; + }; + }; + + SDMA0: sdma@4000 { + compatible = "marvell,mv64360-sdma"; + reg = <0x4000 0xc18>; + virtual-reg = <0xf1004000>; + interrupts = <36>; + interrupt-parent = <&PIC>; + }; + + SDMA1: sdma@6000 { + compatible = "marvell,mv64360-sdma"; + reg = <0x6000 0xc18>; + virtual-reg = <0xf1006000>; + interrupts = <38>; + interrupt-parent = <&PIC>; + }; + + BRG0: brg@b200 { + compatible = "marvell,mv64360-brg"; + reg = <0xb200 0x8>; + clock-src = <8>; + clock-frequency = <133333333>; + current-speed = <9600>; + }; + + BRG1: brg@b208 { + compatible = "marvell,mv64360-brg"; + reg = <0xb208 0x8>; + clock-src = <8>; + clock-frequency = <133333333>; + current-speed = <9600>; + }; + + CUNIT: cunit@f200 { + reg = <0xf200 0x200>; + }; + + MPSCROUTING: mpscrouting@b400 { + reg = <0xb400 0xc>; + }; + + MPSCINTR: mpscintr@b800 { + reg = <0xb800 0x100>; + virtual-reg = <0xf100b800>; + }; + + MPSC0: mpsc@8000 { + compatible = "marvell,mv64360-mpsc"; + reg = <0x8000 0x38>; + virtual-reg = <0xf1008000>; + sdma = <&SDMA0>; + brg = <&BRG0>; + cunit = <&CUNIT>; + mpscrouting = <&MPSCROUTING>; + mpscintr = <&MPSCINTR>; + cell-index = <0>; + interrupts = <40>; + interrupt-parent = <&PIC>; + }; + + MPSC1: mpsc@9000 { + compatible = "marvell,mv64360-mpsc"; + reg = <0x9000 0x38>; + virtual-reg = <0xf1009000>; + sdma = <&SDMA1>; + brg = <&BRG1>; + cunit = <&CUNIT>; + mpscrouting = <&MPSCROUTING>; + mpscintr = <&MPSCINTR>; + cell-index = <1>; + interrupts = <42>; + interrupt-parent = <&PIC>; + }; + + wdt@b410 { /* watchdog timer */ + compatible = "marvell,mv64360-wdt"; + reg = <0xb410 0x8>; + }; + + i2c@c000 { + device_type = "i2c"; + compatible = "marvell,mv64360-i2c"; + reg = <0xc000 0x20>; + virtual-reg = <0xf100c000>; + interrupts = <37>; + interrupt-parent = <&PIC>; + }; + + PIC: pic { + #interrupt-cells = <1>; + #address-cells = <0>; + compatible = "marvell,mv64360-pic"; + reg = <0x0 0x88>; + interrupt-controller; + }; + + mpp@f000 { + compatible = "marvell,mv64360-mpp"; + reg = <0xf000 0x10>; + }; + + gpp@f100 { + compatible = "marvell,mv64360-gpp"; + reg = <0xf100 0x20>; + }; + + pci@80000000 { + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + device_type = "pci"; + compatible = "marvell,mv64360-pci"; + reg = <0xcf8 0x8>; + ranges = <0x01000000 0x0 0x0 + 0x88000000 0x0 0x01000000 + 0x02000000 0x0 0x80000000 + 0x80000000 0x0 0x08000000>; + bus-range = <0 255>; + clock-frequency = <66000000>; + interrupt-pci-iack = <0xc34>; + interrupt-parent = <&PIC>; + interrupt-map-mask = <0xf800 0x0 0x0 0x7>; + interrupt-map = < + /* IDSEL 0x0a */ + 0x5000 0 0 1 &PIC 80 + 0x5000 0 0 2 &PIC 81 + 0x5000 0 0 3 &PIC 91 + 0x5000 0 0 4 &PIC 93 + + /* IDSEL 0x0b */ + 0x5800 0 0 1 &PIC 91 + 0x5800 0 0 2 &PIC 93 + 0x5800 0 0 3 &PIC 80 + 0x5800 0 0 4 &PIC 81 + + /* IDSEL 0x0c */ + 0x6000 0 0 1 &PIC 91 + 0x6000 0 0 2 &PIC 93 + 0x6000 0 0 3 &PIC 80 + 0x6000 0 0 4 &PIC 81 + + /* IDSEL 0x0d */ + 0x6800 0 0 1 &PIC 93 + 0x6800 0 0 2 &PIC 80 + 0x6800 0 0 3 &PIC 81 + 0x6800 0 0 4 &PIC 91 + >; + }; + + cpu-error@0070 { + compatible = "marvell,mv64360-cpu-error"; + reg = <0x70 0x10 0x128 0x28>; + interrupts = <3>; + interrupt-parent = <&PIC>; + }; + + sram-ctrl@0380 { + compatible = "marvell,mv64360-sram-ctrl"; + reg = <0x380 0x80>; + interrupts = <13>; + interrupt-parent = <&PIC>; + }; + + pci-error@1d40 { + compatible = "marvell,mv64360-pci-error"; + reg = <0x1d40 0x40 0xc28 0x4>; + interrupts = <12>; + interrupt-parent = <&PIC>; + }; + + mem-ctrl@1400 { + compatible = "marvell,mv64360-mem-ctrl"; + reg = <0x1400 0x60>; + interrupts = <17>; + interrupt-parent = <&PIC>; + }; + }; + + chosen { + bootargs = "ip=on"; + linux,stdout-path = &MPSC0; + }; +}; diff --git a/arch/powerpc/boot/dts/ps3.dts b/arch/powerpc/boot/dts/ps3.dts new file mode 100644 index 000000000..96ba5b512 --- /dev/null +++ b/arch/powerpc/boot/dts/ps3.dts @@ -0,0 +1,70 @@ +/* + * PS3 Game Console device tree. + * + * Copyright (C) 2007 Sony Computer Entertainment Inc. + * Copyright 2007 Sony Corp. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +/dts-v1/; + +/ { + model = "SonyPS3"; + compatible = "sony,ps3"; + #size-cells = <2>; + #address-cells = <2>; + + chosen { + }; + + /* + * We'll get the size of the bootmem block from lv1 after startup, + * so we'll put a null entry here. + */ + + memory { + device_type = "memory"; + reg = <0x00000000 0x00000000 0x00000000 0x00000000>; + }; + + /* + * The boot cpu is always zero for PS3. + * + * dtc expects a clock-frequency and timebase-frequency entries, so + * we'll put a null entries here. These will be initialized after + * startup with data from lv1. + * + * Seems the only way currently to indicate a processor has multiple + * threads is with an ibm,ppc-interrupt-server#s entry. We'll put one + * here so we can bring up both of ours. See smp_setup_cpu_maps(). + */ + + cpus { + #size-cells = <0>; + #address-cells = <1>; + + cpu@0 { + device_type = "cpu"; + reg = <0x00000000>; + ibm,ppc-interrupt-server#s = <0x0 0x1>; + clock-frequency = <0>; + timebase-frequency = <0>; + i-cache-size = <32768>; + d-cache-size = <32768>; + i-cache-line-size = <128>; + d-cache-line-size = <128>; + }; + }; +}; diff --git a/arch/powerpc/boot/dts/rainier.dts b/arch/powerpc/boot/dts/rainier.dts new file mode 100644 index 000000000..9684c80e4 --- /dev/null +++ b/arch/powerpc/boot/dts/rainier.dts @@ -0,0 +1,350 @@ +/* + * Device Tree Source for AMCC Rainier + * + * Based on Sequoia code + * Copyright (c) 2007 MontaVista Software, Inc. + * + * FIXME: Draft only! + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without + * any warranty of any kind, whether express or implied. + * + */ + +/dts-v1/; + +/ { + #address-cells = <2>; + #size-cells = <1>; + model = "amcc,rainier"; + compatible = "amcc,rainier"; + dcr-parent = <&{/cpus/cpu@0}>; + + aliases { + ethernet0 = &EMAC0; + ethernet1 = &EMAC1; + serial0 = &UART0; + serial1 = &UART1; + serial2 = &UART2; + serial3 = &UART3; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu@0 { + device_type = "cpu"; + model = "PowerPC,440GRx"; + reg = <0x00000000>; + clock-frequency = <0>; /* Filled in by zImage */ + timebase-frequency = <0>; /* Filled in by zImage */ + i-cache-line-size = <32>; + d-cache-line-size = <32>; + i-cache-size = <32768>; + d-cache-size = <32768>; + dcr-controller; + dcr-access-method = "native"; + }; + }; + + memory { + device_type = "memory"; + reg = <0x00000000 0x00000000 0x00000000>; /* Filled in by zImage */ + }; + + UIC0: interrupt-controller0 { + compatible = "ibm,uic-440grx","ibm,uic"; + interrupt-controller; + cell-index = <0>; + dcr-reg = <0x0c0 0x009>; + #address-cells = <0>; + #size-cells = <0>; + #interrupt-cells = <2>; + }; + + UIC1: interrupt-controller1 { + compatible = "ibm,uic-440grx","ibm,uic"; + interrupt-controller; + cell-index = <1>; + dcr-reg = <0x0d0 0x009>; + #address-cells = <0>; + #size-cells = <0>; + #interrupt-cells = <2>; + interrupts = <0x1e 0x4 0x1f 0x4>; /* cascade */ + interrupt-parent = <&UIC0>; + }; + + UIC2: interrupt-controller2 { + compatible = "ibm,uic-440grx","ibm,uic"; + interrupt-controller; + cell-index = <2>; + dcr-reg = <0x0e0 0x009>; + #address-cells = <0>; + #size-cells = <0>; + #interrupt-cells = <2>; + interrupts = <0x1c 0x4 0x1d 0x4>; /* cascade */ + interrupt-parent = <&UIC0>; + }; + + SDR0: sdr { + compatible = "ibm,sdr-440grx", "ibm,sdr-440ep"; + dcr-reg = <0x00e 0x002>; + }; + + CPR0: cpr { + compatible = "ibm,cpr-440grx", "ibm,cpr-440ep"; + dcr-reg = <0x00c 0x002>; + }; + + plb { + compatible = "ibm,plb-440grx", "ibm,plb4"; + #address-cells = <2>; + #size-cells = <1>; + ranges; + clock-frequency = <0>; /* Filled in by zImage */ + + SDRAM0: sdram { + compatible = "ibm,sdram-440grx", "ibm,sdram-44x-ddr2denali"; + dcr-reg = <0x010 0x002>; + }; + + DMA0: dma { + compatible = "ibm,dma-440grx", "ibm,dma-4xx"; + dcr-reg = <0x100 0x027>; + }; + + MAL0: mcmal { + compatible = "ibm,mcmal-440grx", "ibm,mcmal2"; + dcr-reg = <0x180 0x062>; + num-tx-chans = <2>; + num-rx-chans = <2>; + interrupt-parent = <&MAL0>; + interrupts = <0x0 0x1 0x2 0x3 0x4>; + #interrupt-cells = <1>; + #address-cells = <0>; + #size-cells = <0>; + interrupt-map = </*TXEOB*/ 0x0 &UIC0 0xa 0x4 + /*RXEOB*/ 0x1 &UIC0 0xb 0x4 + /*SERR*/ 0x2 &UIC1 0x0 0x4 + /*TXDE*/ 0x3 &UIC1 0x1 0x4 + /*RXDE*/ 0x4 &UIC1 0x2 0x4>; + interrupt-map-mask = <0xffffffff>; + }; + + POB0: opb { + compatible = "ibm,opb-440grx", "ibm,opb"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x00000000 0x00000001 0x00000000 0x80000000 + 0x80000000 0x00000001 0x80000000 0x80000000>; + interrupt-parent = <&UIC1>; + interrupts = <0x7 0x4>; + clock-frequency = <0>; /* Filled in by zImage */ + + EBC0: ebc { + compatible = "ibm,ebc-440grx", "ibm,ebc"; + dcr-reg = <0x012 0x002>; + #address-cells = <2>; + #size-cells = <1>; + clock-frequency = <0>; /* Filled in by zImage */ + interrupts = <0x5 0x1>; + interrupt-parent = <&UIC1>; + + nor_flash@0,0 { + compatible = "amd,s29gl256n", "cfi-flash"; + bank-width = <2>; + reg = <0x00000000 0x00000000 0x04000000>; + #address-cells = <1>; + #size-cells = <1>; + partition@0 { + label = "Kernel"; + reg = <0x00000000 0x00180000>; + }; + partition@180000 { + label = "ramdisk"; + reg = <0x00180000 0x00200000>; + }; + partition@380000 { + label = "file system"; + reg = <0x00380000 0x03aa0000>; + }; + partition@3e20000 { + label = "kozio"; + reg = <0x03e20000 0x00140000>; + }; + partition@3f60000 { + label = "env"; + reg = <0x03f60000 0x00040000>; + }; + partition@3fa0000 { + label = "u-boot"; + reg = <0x03fa0000 0x00060000>; + }; + }; + + }; + + UART0: serial@ef600300 { + device_type = "serial"; + compatible = "ns16550"; + reg = <0xef600300 0x00000008>; + virtual-reg = <0xef600300>; + clock-frequency = <0>; /* Filled in by zImage */ + current-speed = <115200>; + interrupt-parent = <&UIC0>; + interrupts = <0x0 0x4>; + }; + + UART1: serial@ef600400 { + device_type = "serial"; + compatible = "ns16550"; + reg = <0xef600400 0x00000008>; + virtual-reg = <0xef600400>; + clock-frequency = <0>; + current-speed = <0>; + interrupt-parent = <&UIC0>; + interrupts = <0x1 0x4>; + }; + + UART2: serial@ef600500 { + device_type = "serial"; + compatible = "ns16550"; + reg = <0xef600500 0x00000008>; + virtual-reg = <0xef600500>; + clock-frequency = <0>; + current-speed = <0>; + interrupt-parent = <&UIC1>; + interrupts = <0x3 0x4>; + }; + + UART3: serial@ef600600 { + device_type = "serial"; + compatible = "ns16550"; + reg = <0xef600600 0x00000008>; + virtual-reg = <0xef600600>; + clock-frequency = <0>; + current-speed = <0>; + interrupt-parent = <&UIC1>; + interrupts = <0x4 0x4>; + }; + + IIC0: i2c@ef600700 { + compatible = "ibm,iic-440grx", "ibm,iic"; + reg = <0xef600700 0x00000014>; + interrupt-parent = <&UIC0>; + interrupts = <0x2 0x4>; + }; + + IIC1: i2c@ef600800 { + compatible = "ibm,iic-440grx", "ibm,iic"; + reg = <0xef600800 0x00000014>; + interrupt-parent = <&UIC0>; + interrupts = <0x7 0x4>; + }; + + ZMII0: emac-zmii@ef600d00 { + compatible = "ibm,zmii-440grx", "ibm,zmii"; + reg = <0xef600d00 0x0000000c>; + }; + + RGMII0: emac-rgmii@ef601000 { + compatible = "ibm,rgmii-440grx", "ibm,rgmii"; + reg = <0xef601000 0x00000008>; + has-mdio; + }; + + EMAC0: ethernet@ef600e00 { + device_type = "network"; + compatible = "ibm,emac-440grx", "ibm,emac-440epx", "ibm,emac4"; + interrupt-parent = <&EMAC0>; + interrupts = <0x0 0x1>; + #interrupt-cells = <1>; + #address-cells = <0>; + #size-cells = <0>; + interrupt-map = </*Status*/ 0x0 &UIC0 0x18 0x4 + /*Wake*/ 0x1 &UIC1 0x1d 0x4>; + reg = <0xef600e00 0x00000074>; + local-mac-address = [000000000000]; + mal-device = <&MAL0>; + mal-tx-channel = <0>; + mal-rx-channel = <0>; + cell-index = <0>; + max-frame-size = <9000>; + rx-fifo-size = <4096>; + tx-fifo-size = <2048>; + phy-mode = "rgmii"; + phy-map = <0x00000000>; + zmii-device = <&ZMII0>; + zmii-channel = <0>; + rgmii-device = <&RGMII0>; + rgmii-channel = <0>; + has-inverted-stacr-oc; + has-new-stacr-staopc; + }; + + EMAC1: ethernet@ef600f00 { + device_type = "network"; + compatible = "ibm,emac-440grx", "ibm,emac-440epx", "ibm,emac4"; + interrupt-parent = <&EMAC1>; + interrupts = <0x0 0x1>; + #interrupt-cells = <1>; + #address-cells = <0>; + #size-cells = <0>; + interrupt-map = </*Status*/ 0x0 &UIC0 0x19 0x4 + /*Wake*/ 0x1 &UIC1 0x1f 0x4>; + reg = <0xef600f00 0x00000074>; + local-mac-address = [000000000000]; + mal-device = <&MAL0>; + mal-tx-channel = <1>; + mal-rx-channel = <1>; + cell-index = <1>; + max-frame-size = <9000>; + rx-fifo-size = <4096>; + tx-fifo-size = <2048>; + phy-mode = "rgmii"; + phy-map = <0x00000000>; + zmii-device = <&ZMII0>; + zmii-channel = <1>; + rgmii-device = <&RGMII0>; + rgmii-channel = <1>; + has-inverted-stacr-oc; + has-new-stacr-staopc; + }; + }; + + PCI0: pci@1ec000000 { + device_type = "pci"; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + compatible = "ibm,plb440grx-pci", "ibm,plb-pci"; + primary; + reg = <0x00000001 0xeec00000 0x00000008 /* Config space access */ + 0x00000001 0xeed00000 0x00000004 /* IACK */ + 0x00000001 0xeed00000 0x00000004 /* Special cycle */ + 0x00000001 0xef400000 0x00000040>; /* Internal registers */ + + /* Outbound ranges, one memory and one IO, + * later cannot be changed. Chip supports a second + * IO range but we don't use it for now + */ + ranges = <0x02000000 0x0 0x80000000 0x1 0x80000000 0x0 0x40000000 + 0x01000000 0x0 0x00000000 0x1 0xe8000000 0x0 0x00010000 + 0x01000000 0x0 0x00000000 0x1 0xe8800000 0x0 0x03800000>; + + /* Inbound 2GB range starting at 0 */ + dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x0 0x80000000>; + + /* All PCI interrupts are routed to IRQ 67 */ + interrupt-map-mask = <0x0 0x0 0x0 0x0>; + interrupt-map = < 0x0 0x0 0x0 0x0 &UIC2 0x3 0x8 >; + }; + }; + + chosen { + linux,stdout-path = "/plb/opb/serial@ef600300"; + bootargs = "console=ttyS0,115200"; + }; +}; diff --git a/arch/powerpc/boot/dts/redwood.dts b/arch/powerpc/boot/dts/redwood.dts new file mode 100644 index 000000000..d86a3a498 --- /dev/null +++ b/arch/powerpc/boot/dts/redwood.dts @@ -0,0 +1,387 @@ +/* + * Device Tree Source for AMCC Redwood(460SX) + * + * Copyright 2008 AMCC <tmarri@amcc.com> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without + * any warranty of any kind, whether express or implied. + */ + +/dts-v1/; + +/ { + #address-cells = <2>; + #size-cells = <1>; + model = "amcc,redwood"; + compatible = "amcc,redwood"; + dcr-parent = <&{/cpus/cpu@0}>; + + aliases { + ethernet0 = &EMAC0; + serial0 = &UART0; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu@0 { + device_type = "cpu"; + model = "PowerPC,460SX"; + reg = <0x00000000>; + clock-frequency = <0>; /* Filled in by U-Boot */ + timebase-frequency = <0>; /* Filled in by U-Boot */ + i-cache-line-size = <32>; + d-cache-line-size = <32>; + i-cache-size = <32768>; + d-cache-size = <32768>; + dcr-controller; + dcr-access-method = "native"; + }; + }; + + memory { + device_type = "memory"; + reg = <0x00000000 0x00000000 0x00000000>; /* Filled in by U-Boot */ + }; + + UIC0: interrupt-controller0 { + compatible = "ibm,uic-460sx","ibm,uic"; + interrupt-controller; + cell-index = <0>; + dcr-reg = <0x0c0 0x009>; + #address-cells = <0>; + #size-cells = <0>; + #interrupt-cells = <2>; + }; + + UIC1: interrupt-controller1 { + compatible = "ibm,uic-460sx","ibm,uic"; + interrupt-controller; + cell-index = <1>; + dcr-reg = <0x0d0 0x009>; + #address-cells = <0>; + #size-cells = <0>; + #interrupt-cells = <2>; + interrupts = <0x1e 0x4 0x1f 0x4>; /* cascade */ + interrupt-parent = <&UIC0>; + }; + + UIC2: interrupt-controller2 { + compatible = "ibm,uic-460sx","ibm,uic"; + interrupt-controller; + cell-index = <2>; + dcr-reg = <0x0e0 0x009>; + #address-cells = <0>; + #size-cells = <0>; + #interrupt-cells = <2>; + interrupts = <0xa 0x4 0xb 0x4>; /* cascade */ + interrupt-parent = <&UIC0>; + }; + + UIC3: interrupt-controller3 { + compatible = "ibm,uic-460sx","ibm,uic"; + interrupt-controller; + cell-index = <3>; + dcr-reg = <0x0f0 0x009>; + #address-cells = <0>; + #size-cells = <0>; + #interrupt-cells = <2>; + interrupts = <0x10 0x4 0x11 0x4>; /* cascade */ + interrupt-parent = <&UIC0>; + }; + + SDR0: sdr { + compatible = "ibm,sdr-460sx"; + dcr-reg = <0x00e 0x002>; + }; + + CPR0: cpr { + compatible = "ibm,cpr-460sx"; + dcr-reg = <0x00c 0x002>; + }; + + plb { + compatible = "ibm,plb-460sx", "ibm,plb4"; + #address-cells = <2>; + #size-cells = <1>; + ranges; + clock-frequency = <0>; /* Filled in by U-Boot */ + + SDRAM0: sdram { + compatible = "ibm,sdram-460sx", "ibm,sdram-405gp"; + dcr-reg = <0x010 0x002>; + }; + + MAL0: mcmal { + compatible = "ibm,mcmal-460sx", "ibm,mcmal2"; + dcr-reg = <0x180 0x62>; + num-tx-chans = <4>; + num-rx-chans = <32>; + #address-cells = <1>; + #size-cells = <1>; + interrupt-parent = <&UIC1>; + interrupts = < /*TXEOB*/ 0x6 0x4 + /*RXEOB*/ 0x7 0x4 + /*SERR*/ 0x1 0x4 + /*TXDE*/ 0x2 0x4 + /*RXDE*/ 0x3 0x4 + /*COAL TX0*/ 0x18 0x2 + /*COAL TX1*/ 0x19 0x2 + /*COAL TX2*/ 0x1a 0x2 + /*COAL TX3*/ 0x1b 0x2 + /*COAL RX0*/ 0x1c 0x2 + /*COAL RX1*/ 0x1d 0x2 + /*COAL RX2*/ 0x1e 0x2 + /*COAL RX3*/ 0x1f 0x2>; + }; + + POB0: opb { + compatible = "ibm,opb-460sx", "ibm,opb"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0xb0000000 0x00000004 0xb0000000 0x50000000>; + clock-frequency = <0>; /* Filled in by U-Boot */ + + EBC0: ebc { + compatible = "ibm,ebc-460sx", "ibm,ebc"; + dcr-reg = <0x012 0x002>; + #address-cells = <2>; + #size-cells = <1>; + clock-frequency = <0>; /* Filled in by U-Boot */ + /* ranges property is supplied by U-Boot */ + interrupts = <0x6 0x4>; + interrupt-parent = <&UIC1>; + + nor_flash@0,0 { + compatible = "amd,s29gl512n", "cfi-flash"; + bank-width = <2>; + reg = <0x0000000 0x00000000 0x04000000>; + #address-cells = <1>; + #size-cells = <1>; + partition@0 { + label = "kernel"; + reg = <0x00000000 0x001e0000>; + }; + partition@1e0000 { + label = "dtb"; + reg = <0x001e0000 0x00020000>; + }; + partition@200000 { + label = "ramdisk"; + reg = <0x00200000 0x01400000>; + }; + partition@1600000 { + label = "jffs2"; + reg = <0x01600000 0x00400000>; + }; + partition@1a00000 { + label = "user"; + reg = <0x01a00000 0x02560000>; + }; + partition@3f60000 { + label = "env"; + reg = <0x03f60000 0x00040000>; + }; + partition@3fa0000 { + label = "u-boot"; + reg = <0x03fa0000 0x00060000>; + }; + }; + }; + + UART0: serial@ef600200 { + device_type = "serial"; + compatible = "ns16550"; + reg = <0xef600200 0x00000008>; + virtual-reg = <0xef600200>; + clock-frequency = <0>; /* Filled in by U-Boot */ + current-speed = <0>; /* Filled in by U-Boot */ + interrupt-parent = <&UIC0>; + interrupts = <0x0 0x4>; + }; + + RGMII0: emac-rgmii@ef600900 { + compatible = "ibm,rgmii-460sx", "ibm,rgmii"; + reg = <0xef600900 0x00000008>; + }; + + EMAC0: ethernet@ef600a00 { + device_type = "network"; + compatible = "ibm,emac-460sx", "ibm,emac4"; + interrupt-parent = <&EMAC0>; + interrupts = <0x0 0x1>; + #interrupt-cells = <1>; + #address-cells = <0>; + #size-cells = <0>; + interrupt-map = </*Status*/ 0x0 &UIC0 0x13 0x4 + /*Wake*/ 0x1 &UIC2 0x1d 0x4>; + reg = <0xef600a00 0x00000070>; + local-mac-address = [000000000000]; /* Filled in by U-Boot */ + mal-device = <&MAL0>; + mal-tx-channel = <0>; + mal-rx-channel = <0>; + cell-index = <0>; + max-frame-size = <9000>; + rx-fifo-size = <4096>; + tx-fifo-size = <2048>; + rx-fifo-size-gige = <16384>; + phy-mode = "rgmii"; + phy-map = <0x00000000>; + rgmii-device = <&RGMII0>; + rgmii-channel = <0>; + has-inverted-stacr-oc; + has-new-stacr-staopc; + }; + }; + PCIE0: pciex@d00000000 { + device_type = "pci"; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + compatible = "ibm,plb-pciex-460sx", "ibm,plb-pciex"; + primary; + port = <0x0>; /* port number */ + reg = <0x0000000d 0x00000000 0x20000000 /* Config space access */ + 0x0000000c 0x10000000 0x00001000>; /* Registers */ + dcr-reg = <0x100 0x020>; + sdr-base = <0x300>; + + /* Outbound ranges, one memory and one IO, + * later cannot be changed + */ + ranges = <0x02000000 0x00000000 0x80000000 0x0000000e 0x00000000 0x00000000 0x80000000 + 0x01000000 0x00000000 0x00000000 0x0000000f 0x80000000 0x00000000 0x00010000>; + + /* Inbound 2GB range starting at 0 */ + dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x0 0x80000000>; + + /* This drives busses 10 to 0x1f */ + bus-range = <0x10 0x1f>; + + /* Legacy interrupts (note the weird polarity, the bridge seems + * to invert PCIe legacy interrupts). + * We are de-swizzling here because the numbers are actually for + * port of the root complex virtual P2P bridge. But I want + * to avoid putting a node for it in the tree, so the numbers + * below are basically de-swizzled numbers. + * The real slot is on idsel 0, so the swizzling is 1:1 + */ + interrupt-map-mask = <0x0 0x0 0x0 0x7>; + interrupt-map = < + 0x0 0x0 0x0 0x1 &UIC3 0x0 0x4 /* swizzled int A */ + 0x0 0x0 0x0 0x2 &UIC3 0x1 0x4 /* swizzled int B */ + 0x0 0x0 0x0 0x3 &UIC3 0x2 0x4 /* swizzled int C */ + 0x0 0x0 0x0 0x4 &UIC3 0x3 0x4 /* swizzled int D */>; + }; + + PCIE1: pciex@d20000000 { + device_type = "pci"; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + compatible = "ibm,plb-pciex-460sx", "ibm,plb-pciex"; + primary; + port = <0x1>; /* port number */ + reg = <0x0000000d 0x20000000 0x20000000 /* Config space access */ + 0x0000000c 0x10001000 0x00001000>; /* Registers */ + dcr-reg = <0x120 0x020>; + sdr-base = <0x340>; + + /* Outbound ranges, one memory and one IO, + * later cannot be changed + */ + ranges = <0x02000000 0x00000000 0x80000000 0x0000000e 0x80000000 0x00000000 0x80000000 + 0x01000000 0x00000000 0x00000000 0x0000000f 0x80010000 0x00000000 0x00010000>; + + /* Inbound 2GB range starting at 0 */ + dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x0 0x80000000>; + + /* This drives busses 10 to 0x1f */ + bus-range = <0x20 0x2f>; + + /* Legacy interrupts (note the weird polarity, the bridge seems + * to invert PCIe legacy interrupts). + * We are de-swizzling here because the numbers are actually for + * port of the root complex virtual P2P bridge. But I want + * to avoid putting a node for it in the tree, so the numbers + * below are basically de-swizzled numbers. + * The real slot is on idsel 0, so the swizzling is 1:1 + */ + interrupt-map-mask = <0x0 0x0 0x0 0x7>; + interrupt-map = < + 0x0 0x0 0x0 0x1 &UIC3 0x4 0x4 /* swizzled int A */ + 0x0 0x0 0x0 0x2 &UIC3 0x5 0x4 /* swizzled int B */ + 0x0 0x0 0x0 0x3 &UIC3 0x6 0x4 /* swizzled int C */ + 0x0 0x0 0x0 0x4 &UIC3 0x7 0x4 /* swizzled int D */>; + }; + + PCIE2: pciex@d40000000 { + device_type = "pci"; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + compatible = "ibm,plb-pciex-460sx", "ibm,plb-pciex"; + primary; + port = <0x2>; /* port number */ + reg = <0x0000000d 0x40000000 0x20000000 /* Config space access */ + 0x0000000c 0x10002000 0x00001000>; /* Registers */ + dcr-reg = <0x140 0x020>; + sdr-base = <0x370>; + + /* Outbound ranges, one memory and one IO, + * later cannot be changed + */ + ranges = <0x02000000 0x00000000 0x80000000 0x0000000f 0x00000000 0x00000000 0x80000000 + 0x01000000 0x00000000 0x00000000 0x0000000f 0x80020000 0x00000000 0x00010000>; + + /* Inbound 2GB range starting at 0 */ + dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x0 0x80000000>; + + /* This drives busses 10 to 0x1f */ + bus-range = <0x30 0x3f>; + + /* Legacy interrupts (note the weird polarity, the bridge seems + * to invert PCIe legacy interrupts). + * We are de-swizzling here because the numbers are actually for + * port of the root complex virtual P2P bridge. But I want + * to avoid putting a node for it in the tree, so the numbers + * below are basically de-swizzled numbers. + * The real slot is on idsel 0, so the swizzling is 1:1 + */ + interrupt-map-mask = <0x0 0x0 0x0 0x7>; + interrupt-map = < + 0x0 0x0 0x0 0x1 &UIC3 0x8 0x4 /* swizzled int A */ + 0x0 0x0 0x0 0x2 &UIC3 0x9 0x4 /* swizzled int B */ + 0x0 0x0 0x0 0x3 &UIC3 0xa 0x4 /* swizzled int C */ + 0x0 0x0 0x0 0x4 &UIC3 0xb 0x4 /* swizzled int D */>; + }; + + MSI: ppc4xx-msi@400300000 { + compatible = "amcc,ppc4xx-msi", "ppc4xx-msi"; + reg = < 0x4 0x00300000 0x100 + 0x4 0x00300000 0x100>; + sdr-base = <0x3B0>; + msi-data = <0x00000000>; + msi-mask = <0x44440000>; + interrupt-count = <3>; + interrupts =<0 1 2 3>; + interrupt-parent = <&UIC0>; + #interrupt-cells = <1>; + #address-cells = <0>; + #size-cells = <0>; + interrupt-map = <0 &UIC0 0xC 1 + 1 &UIC0 0x0D 1 + 2 &UIC0 0x0E 1 + 3 &UIC0 0x0F 1>; + }; + + }; + + + chosen { + linux,stdout-path = "/plb/opb/serial@ef600200"; + }; + +}; diff --git a/arch/powerpc/boot/dts/sam440ep.dts b/arch/powerpc/boot/dts/sam440ep.dts new file mode 100644 index 000000000..f0663be10 --- /dev/null +++ b/arch/powerpc/boot/dts/sam440ep.dts @@ -0,0 +1,293 @@ +/* + * Device Tree Source for ACube Sam440ep based off bamboo.dts code + * original copyrights below + * + * Copyright (c) 2006, 2007 IBM Corp. + * Josh Boyer <jwboyer@linux.vnet.ibm.com> + * + * Modified from bamboo.dts for sam440ep: + * Copyright 2008 Giuseppe Coviello <gicoviello@gmail.com> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without + * any warranty of any kind, whether express or implied. + */ + +/dts-v1/; + +/ { + #address-cells = <2>; + #size-cells = <1>; + model = "acube,sam440ep"; + compatible = "acube,sam440ep"; + + aliases { + ethernet0 = &EMAC0; + ethernet1 = &EMAC1; + serial0 = &UART0; + serial1 = &UART1; + serial2 = &UART2; + serial3 = &UART3; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu@0 { + device_type = "cpu"; + model = "PowerPC,440EP"; + reg = <0>; + clock-frequency = <0>; /* Filled in by zImage */ + timebase-frequency = <0>; /* Filled in by zImage */ + i-cache-line-size = <32>; + d-cache-line-size = <32>; + i-cache-size = <32768>; + d-cache-size = <32768>; + dcr-controller; + dcr-access-method = "native"; + }; + }; + + memory { + device_type = "memory"; + reg = <0 0 0>; /* Filled in by zImage */ + }; + + UIC0: interrupt-controller0 { + compatible = "ibm,uic-440ep","ibm,uic"; + interrupt-controller; + cell-index = <0>; + dcr-reg = <0x0c0 9>; + #address-cells = <0>; + #size-cells = <0>; + #interrupt-cells = <2>; + }; + + UIC1: interrupt-controller1 { + compatible = "ibm,uic-440ep","ibm,uic"; + interrupt-controller; + cell-index = <1>; + dcr-reg = <0x0d0 9>; + #address-cells = <0>; + #size-cells = <0>; + #interrupt-cells = <2>; + interrupts = <0x1e 4 0x1f 4>; /* cascade */ + interrupt-parent = <&UIC0>; + }; + + SDR0: sdr { + compatible = "ibm,sdr-440ep"; + dcr-reg = <0x00e 2>; + }; + + CPR0: cpr { + compatible = "ibm,cpr-440ep"; + dcr-reg = <0x00c 2>; + }; + + plb { + compatible = "ibm,plb-440ep", "ibm,plb-440gp", "ibm,plb4"; + #address-cells = <2>; + #size-cells = <1>; + ranges; + clock-frequency = <0>; /* Filled in by zImage */ + + SDRAM0: sdram { + compatible = "ibm,sdram-440ep", "ibm,sdram-405gp"; + dcr-reg = <0x010 2>; + }; + + DMA0: dma { + compatible = "ibm,dma-440ep", "ibm,dma-440gp"; + dcr-reg = <0x100 0x027>; + }; + + MAL0: mcmal { + compatible = "ibm,mcmal-440ep", "ibm,mcmal-440gp", "ibm,mcmal"; + dcr-reg = <0x180 0x062>; + num-tx-chans = <4>; + num-rx-chans = <2>; + interrupt-parent = <&MAL0>; + interrupts = <0 1 2 3 4>; + #interrupt-cells = <1>; + #address-cells = <0>; + #size-cells = <0>; + interrupt-map = </*TXEOB*/ 0 &UIC0 10 4 + /*RXEOB*/ 1 &UIC0 11 4 + /*SERR*/ 2 &UIC1 0 4 + /*TXDE*/ 3 &UIC1 1 4 + /*RXDE*/ 4 &UIC1 2 4>; + }; + + POB0: opb { + compatible = "ibm,opb-440ep", "ibm,opb-440gp", "ibm,opb"; + #address-cells = <1>; + #size-cells = <1>; + /* Bamboo is oddball in the 44x world and doesn't use the ERPN + * bits. + */ + ranges = <0x00000000 0 0x00000000 0x80000000 + 0x80000000 0 0x80000000 0x80000000>; + interrupt-parent = <&UIC1>; + interrupts = <7 4>; + clock-frequency = <0>; /* Filled in by zImage */ + + EBC0: ebc { + compatible = "ibm,ebc-440ep", "ibm,ebc-440gp", "ibm,ebc"; + dcr-reg = <0x012 2>; + #address-cells = <2>; + #size-cells = <1>; + clock-frequency = <0>; /* Filled in by zImage */ + interrupts = <5 1>; + interrupt-parent = <&UIC1>; + }; + + UART0: serial@ef600300 { + device_type = "serial"; + compatible = "ns16550"; + reg = <0xef600300 8>; + virtual-reg = <0xef600300>; + clock-frequency = <0>; /* Filled in by zImage */ + current-speed = <0x1c200>; + interrupt-parent = <&UIC0>; + interrupts = <0 4>; + }; + + UART1: serial@ef600400 { + device_type = "serial"; + compatible = "ns16550"; + reg = <0xef600400 8>; + virtual-reg = <0xef600400>; + clock-frequency = <0>; + current-speed = <0>; + interrupt-parent = <&UIC0>; + interrupts = <1 4>; + }; + + UART2: serial@ef600500 { + device_type = "serial"; + compatible = "ns16550"; + reg = <0xef600500 8>; + virtual-reg = <0xef600500>; + clock-frequency = <0>; + current-speed = <0>; + interrupt-parent = <&UIC0>; + interrupts = <3 4>; + }; + + UART3: serial@ef600600 { + device_type = "serial"; + compatible = "ns16550"; + reg = <0xef600600 8>; + virtual-reg = <0xef600600>; + clock-frequency = <0>; + current-speed = <0>; + interrupt-parent = <&UIC0>; + interrupts = <4 4>; + }; + + IIC0: i2c@ef600700 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "ibm,iic-440ep", "ibm,iic-440gp", "ibm,iic"; + index = <0>; + reg = <0xef600700 0x14>; + interrupt-parent = <&UIC0>; + interrupts = <2 4>; + rtc@68 { + compatible = "stm,m41t80"; + reg = <0x68>; + }; + }; + + IIC1: i2c@ef600800 { + compatible = "ibm,iic-440ep", "ibm,iic-440gp", "ibm,iic"; + index = <5>; + reg = <0xef600800 0x14>; + interrupt-parent = <&UIC0>; + interrupts = <7 4>; + }; + + ZMII0: emac-zmii@ef600d00 { + compatible = "ibm,zmii-440ep", "ibm,zmii-440gp", "ibm,zmii"; + reg = <0xef600d00 0xc>; + }; + + EMAC0: ethernet@ef600e00 { + linux,network-index = <0>; + device_type = "network"; + compatible = "ibm,emac-440ep", "ibm,emac-440gp", "ibm,emac"; + interrupt-parent = <&UIC1>; + interrupts = <0x1c 4 0x1d 4>; + reg = <0xef600e00 0x70>; + local-mac-address = [000000000000]; + mal-device = <&MAL0>; + mal-tx-channel = <0 1>; + mal-rx-channel = <0>; + cell-index = <0>; + max-frame-size = <0x5dc>; + rx-fifo-size = <0x1000>; + tx-fifo-size = <0x800>; + phy-mode = "rmii"; + phy-map = <00000000>; + zmii-device = <&ZMII0>; + zmii-channel = <0>; + }; + + EMAC1: ethernet@ef600f00 { + linux,network-index = <1>; + device_type = "network"; + compatible = "ibm,emac-440ep", "ibm,emac-440gp", "ibm,emac"; + interrupt-parent = <&UIC1>; + interrupts = <0x1e 4 0x1f 4>; + reg = <0xef600f00 0x70>; + local-mac-address = [000000000000]; + mal-device = <&MAL0>; + mal-tx-channel = <2 3>; + mal-rx-channel = <1>; + cell-index = <1>; + max-frame-size = <0x5dc>; + rx-fifo-size = <0x1000>; + tx-fifo-size = <0x800>; + phy-mode = "rmii"; + phy-map = <00000000>; + zmii-device = <&ZMII0>; + zmii-channel = <1>; + }; + usb@ef601000 { + compatible = "ohci-be"; + reg = <0xef601000 0x80>; + interrupts = <8 4 9 4>; + interrupt-parent = <&UIC1>; + }; + }; + + PCI0: pci@ec000000 { + device_type = "pci"; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + compatible = "ibm,plb440ep-pci", "ibm,plb-pci"; + primary; + reg = <0 0xeec00000 8 /* Config space access */ + 0 0xeed00000 4 /* IACK */ + 0 0xeed00000 4 /* Special cycle */ + 0 0xef400000 0x40>; /* Internal registers */ + + /* Outbound ranges, one memory and one IO, + * later cannot be changed. Chip supports a second + * IO range but we don't use it for now + */ + ranges = <0x02000000 0 0xa0000000 0 0xa0000000 0 0x20000000 + 0x01000000 0 0x00000000 0 0xe8000000 0 0x00010000>; + + /* Inbound 2GB range starting at 0 */ + dma-ranges = <0x42000000 0 0 0 0 0 0x80000000>; + }; + }; + + chosen { + linux,stdout-path = "/plb/opb/serial@ef600300"; + }; +}; diff --git a/arch/powerpc/boot/dts/sbc8349.dts b/arch/powerpc/boot/dts/sbc8349.dts new file mode 100644 index 000000000..fc89e00b7 --- /dev/null +++ b/arch/powerpc/boot/dts/sbc8349.dts @@ -0,0 +1,331 @@ +/* + * SBC8349E Device Tree Source + * + * Copyright 2007 Wind River Inc. + * + * Paul Gortmaker (see MAINTAINERS for contact information) + * + * -based largely on the Freescale MPC834x_MDS dts. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +/dts-v1/; + +/ { + model = "SBC8349E"; + compatible = "SBC834xE"; + #address-cells = <1>; + #size-cells = <1>; + + aliases { + ethernet0 = &enet0; + ethernet1 = &enet1; + serial0 = &serial0; + serial1 = &serial1; + pci0 = &pci0; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + PowerPC,8349@0 { + device_type = "cpu"; + reg = <0x0>; + d-cache-line-size = <32>; + i-cache-line-size = <32>; + d-cache-size = <32768>; + i-cache-size = <32768>; + timebase-frequency = <0>; // from bootloader + bus-frequency = <0>; // from bootloader + clock-frequency = <0>; // from bootloader + }; + }; + + memory { + device_type = "memory"; + reg = <0x00000000 0x10000000>; // 256MB at 0 + }; + + soc8349@e0000000 { + #address-cells = <1>; + #size-cells = <1>; + device_type = "soc"; + ranges = <0x0 0xe0000000 0x00100000>; + reg = <0xe0000000 0x00000200>; + bus-frequency = <0>; + + wdt@200 { + compatible = "mpc83xx_wdt"; + reg = <0x200 0x100>; + }; + + i2c@3000 { + #address-cells = <1>; + #size-cells = <0>; + cell-index = <0>; + compatible = "fsl-i2c"; + reg = <0x3000 0x100>; + interrupts = <14 0x8>; + interrupt-parent = <&ipic>; + dfsrr; + }; + + i2c@3100 { + #address-cells = <1>; + #size-cells = <0>; + cell-index = <1>; + compatible = "fsl-i2c"; + reg = <0x3100 0x100>; + interrupts = <15 0x8>; + interrupt-parent = <&ipic>; + dfsrr; + }; + + spi@7000 { + cell-index = <0>; + compatible = "fsl,spi"; + reg = <0x7000 0x1000>; + interrupts = <16 0x8>; + interrupt-parent = <&ipic>; + mode = "cpu"; + }; + + dma@82a8 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,mpc8349-dma", "fsl,elo-dma"; + reg = <0x82a8 4>; + ranges = <0 0x8100 0x1a8>; + interrupt-parent = <&ipic>; + interrupts = <71 8>; + cell-index = <0>; + dma-channel@0 { + compatible = "fsl,mpc8349-dma-channel", "fsl,elo-dma-channel"; + reg = <0 0x80>; + cell-index = <0>; + interrupt-parent = <&ipic>; + interrupts = <71 8>; + }; + dma-channel@80 { + compatible = "fsl,mpc8349-dma-channel", "fsl,elo-dma-channel"; + reg = <0x80 0x80>; + cell-index = <1>; + interrupt-parent = <&ipic>; + interrupts = <71 8>; + }; + dma-channel@100 { + compatible = "fsl,mpc8349-dma-channel", "fsl,elo-dma-channel"; + reg = <0x100 0x80>; + cell-index = <2>; + interrupt-parent = <&ipic>; + interrupts = <71 8>; + }; + dma-channel@180 { + compatible = "fsl,mpc8349-dma-channel", "fsl,elo-dma-channel"; + reg = <0x180 0x28>; + cell-index = <3>; + interrupt-parent = <&ipic>; + interrupts = <71 8>; + }; + }; + + /* phy type (ULPI or SERIAL) are only types supported for MPH */ + /* port = 0 or 1 */ + usb@22000 { + compatible = "fsl-usb2-mph"; + reg = <0x22000 0x1000>; + #address-cells = <1>; + #size-cells = <0>; + interrupt-parent = <&ipic>; + interrupts = <39 0x8>; + phy_type = "ulpi"; + port0; + }; + + enet0: ethernet@24000 { + #address-cells = <1>; + #size-cells = <1>; + cell-index = <0>; + device_type = "network"; + model = "TSEC"; + compatible = "gianfar"; + reg = <0x24000 0x1000>; + ranges = <0x0 0x24000 0x1000>; + local-mac-address = [ 00 00 00 00 00 00 ]; + interrupts = <32 0x8 33 0x8 34 0x8>; + interrupt-parent = <&ipic>; + tbi-handle = <&tbi0>; + phy-handle = <&phy0>; + linux,network-index = <0>; + + mdio@520 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,gianfar-mdio"; + reg = <0x520 0x20>; + + phy0: ethernet-phy@19 { + interrupt-parent = <&ipic>; + interrupts = <20 0x8>; + reg = <0x19>; + }; + + phy1: ethernet-phy@1a { + interrupt-parent = <&ipic>; + interrupts = <21 0x8>; + reg = <0x1a>; + }; + + tbi0: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + }; + + enet1: ethernet@25000 { + #address-cells = <1>; + #size-cells = <1>; + cell-index = <1>; + device_type = "network"; + model = "TSEC"; + compatible = "gianfar"; + reg = <0x25000 0x1000>; + ranges = <0x0 0x25000 0x1000>; + local-mac-address = [ 00 00 00 00 00 00 ]; + interrupts = <35 0x8 36 0x8 37 0x8>; + interrupt-parent = <&ipic>; + tbi-handle = <&tbi1>; + phy-handle = <&phy1>; + linux,network-index = <1>; + + mdio@520 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,gianfar-tbi"; + reg = <0x520 0x20>; + + tbi1: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + }; + + serial0: serial@4500 { + cell-index = <0>; + device_type = "serial"; + compatible = "fsl,ns16550", "ns16550"; + reg = <0x4500 0x100>; + clock-frequency = <0>; + interrupts = <9 0x8>; + interrupt-parent = <&ipic>; + }; + + serial1: serial@4600 { + cell-index = <1>; + device_type = "serial"; + compatible = "fsl,ns16550", "ns16550"; + reg = <0x4600 0x100>; + clock-frequency = <0>; + interrupts = <10 0x8>; + interrupt-parent = <&ipic>; + }; + + crypto@30000 { + compatible = "fsl,sec2.0"; + reg = <0x30000 0x10000>; + interrupts = <11 0x8>; + interrupt-parent = <&ipic>; + fsl,num-channels = <4>; + fsl,channel-fifo-len = <24>; + fsl,exec-units-mask = <0x7e>; + fsl,descriptor-types-mask = <0x01010ebf>; + }; + + /* IPIC + * interrupts cell = <intr #, sense> + * sense values match linux IORESOURCE_IRQ_* defines: + * sense == 8: Level, low assertion + * sense == 2: Edge, high-to-low change + */ + ipic: pic@700 { + interrupt-controller; + #address-cells = <0>; + #interrupt-cells = <2>; + reg = <0x700 0x100>; + device_type = "ipic"; + }; + }; + + localbus@e0005000 { + #address-cells = <2>; + #size-cells = <1>; + compatible = "fsl,mpc8349-localbus", "simple-bus"; + reg = <0xe0005000 0x1000>; + interrupts = <77 0x8>; + interrupt-parent = <&ipic>; + ranges = <0x0 0x0 0xff800000 0x00800000 /* 8MB Flash */ + 0x1 0x0 0xf8000000 0x00002000 /* 8KB EEPROM */ + 0x2 0x0 0x10000000 0x04000000 /* 64MB SDRAM */ + 0x3 0x0 0x10000000 0x04000000>; /* 64MB SDRAM */ + + flash@0,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "intel,28F640J3A", "cfi-flash"; + reg = <0x0 0x0 0x800000>; + bank-width = <2>; + device-width = <1>; + + partition@0 { + label = "u-boot"; + reg = <0x00000000 0x00040000>; + read-only; + }; + + partition@40000 { + label = "user"; + reg = <0x00040000 0x006c0000>; + }; + + partition@700000 { + label = "legacy u-boot"; + reg = <0x00700000 0x00100000>; + read-only; + }; + + }; + }; + + pci0: pci@e0008500 { + interrupt-map-mask = <0xf800 0x0 0x0 0x7>; + interrupt-map = < + + /* IDSEL 0x11 */ + 0x8800 0x0 0x0 0x1 &ipic 48 0x8 + 0x8800 0x0 0x0 0x2 &ipic 17 0x8 + 0x8800 0x0 0x0 0x3 &ipic 18 0x8 + 0x8800 0x0 0x0 0x4 &ipic 19 0x8>; + + interrupt-parent = <&ipic>; + interrupts = <0x42 0x8>; + bus-range = <0 0>; + ranges = <0x02000000 0x0 0x90000000 0x90000000 0x0 0x10000000 + 0x42000000 0x0 0x80000000 0x80000000 0x0 0x10000000 + 0x01000000 0x0 0x00000000 0xe2000000 0x0 0x00100000>; + clock-frequency = <66666666>; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + reg = <0xe0008500 0x100 /* internal registers */ + 0xe0008300 0x8>; /* config space access registers */ + compatible = "fsl,mpc8349-pci"; + device_type = "pci"; + }; +}; diff --git a/arch/powerpc/boot/dts/sbc8548-altflash.dts b/arch/powerpc/boot/dts/sbc8548-altflash.dts new file mode 100644 index 000000000..0b38a0def --- /dev/null +++ b/arch/powerpc/boot/dts/sbc8548-altflash.dts @@ -0,0 +1,115 @@ +/* + * SBC8548 Device Tree Source + * + * Configured for booting off the alternate (64MB SODIMM) flash. + * Requires switching JP12 jumpers and changing SW2.8 setting. + * + * Copyright 2013 Wind River Systems Inc. + * + * Paul Gortmaker (see MAINTAINERS for contact information) + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + + +/dts-v1/; + +/include/ "sbc8548-pre.dtsi" + +/{ + localbus@e0000000 { + #address-cells = <2>; + #size-cells = <1>; + compatible = "simple-bus"; + reg = <0xe0000000 0x5000>; + interrupt-parent = <&mpic>; + + ranges = <0x0 0x0 0xfc000000 0x04000000 /*64MB Flash*/ + 0x3 0x0 0xf0000000 0x04000000 /*64MB SDRAM*/ + 0x4 0x0 0xf4000000 0x04000000 /*64MB SDRAM*/ + 0x5 0x0 0xf8000000 0x00b10000 /* EPLD */ + 0x6 0x0 0xef800000 0x00800000>; /*8MB Flash*/ + + flash@0,0 { + #address-cells = <1>; + #size-cells = <1>; + reg = <0x0 0x0 0x04000000>; + compatible = "intel,JS28F128", "cfi-flash"; + bank-width = <4>; + device-width = <1>; + partition@0x0 { + label = "space"; + /* FC000000 -> FFEFFFFF */ + reg = <0x00000000 0x03f00000>; + }; + partition@0x03f00000 { + label = "bootloader"; + /* FFF00000 -> FFFFFFFF */ + reg = <0x03f00000 0x00100000>; + read-only; + }; + }; + + + epld@5,0 { + compatible = "wrs,epld-localbus"; + #address-cells = <2>; + #size-cells = <1>; + reg = <0x5 0x0 0x00b10000>; + ranges = < + 0x0 0x0 0x5 0x000000 0x1fff /* LED */ + 0x1 0x0 0x5 0x100000 0x1fff /* Switches */ + 0x3 0x0 0x5 0x300000 0x1fff /* HW Rev. */ + 0xb 0x0 0x5 0xb00000 0x1fff /* EEPROM */ + >; + + led@0,0 { + compatible = "led"; + reg = <0x0 0x0 0x1fff>; + }; + + switches@1,0 { + compatible = "switches"; + reg = <0x1 0x0 0x1fff>; + }; + + hw-rev@3,0 { + compatible = "hw-rev"; + reg = <0x3 0x0 0x1fff>; + }; + + eeprom@b,0 { + compatible = "eeprom"; + reg = <0xb 0 0x1fff>; + }; + + }; + + alt-flash@6,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "intel,JS28F640", "cfi-flash"; + reg = <0x6 0x0 0x800000>; + bank-width = <1>; + device-width = <1>; + partition@0x0 { + label = "space"; + /* EF800000 -> EFF9FFFF */ + reg = <0x00000000 0x007a0000>; + }; + partition@0x7a0000 { + label = "bootloader"; + /* EFFA0000 -> EFFFFFFF */ + reg = <0x007a0000 0x00060000>; + read-only; + }; + }; + + + }; +}; + +/include/ "sbc8548-post.dtsi" diff --git a/arch/powerpc/boot/dts/sbc8548-post.dtsi b/arch/powerpc/boot/dts/sbc8548-post.dtsi new file mode 100644 index 000000000..9b505c8e5 --- /dev/null +++ b/arch/powerpc/boot/dts/sbc8548-post.dtsi @@ -0,0 +1,293 @@ +/* + * SBC8548 Device Tree Source + * + * Copyright 2007 Wind River Systems Inc. + * + * Paul Gortmaker (see MAINTAINERS for contact information) + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +/{ + soc8548@e0000000 { + #address-cells = <1>; + #size-cells = <1>; + device_type = "soc"; + ranges = <0x00000000 0xe0000000 0x00100000>; + bus-frequency = <0>; + compatible = "simple-bus"; + + ecm-law@0 { + compatible = "fsl,ecm-law"; + reg = <0x0 0x1000>; + fsl,num-laws = <10>; + }; + + ecm@1000 { + compatible = "fsl,mpc8548-ecm", "fsl,ecm"; + reg = <0x1000 0x1000>; + interrupts = <17 2>; + interrupt-parent = <&mpic>; + }; + + memory-controller@2000 { + compatible = "fsl,mpc8548-memory-controller"; + reg = <0x2000 0x1000>; + interrupt-parent = <&mpic>; + interrupts = <0x12 0x2>; + }; + + L2: l2-cache-controller@20000 { + compatible = "fsl,mpc8548-l2-cache-controller"; + reg = <0x20000 0x1000>; + cache-line-size = <0x20>; // 32 bytes + cache-size = <0x80000>; // L2, 512K + interrupt-parent = <&mpic>; + interrupts = <0x10 0x2>; + }; + + i2c@3000 { + #address-cells = <1>; + #size-cells = <0>; + cell-index = <0>; + compatible = "fsl-i2c"; + reg = <0x3000 0x100>; + interrupts = <0x2b 0x2>; + interrupt-parent = <&mpic>; + dfsrr; + }; + + i2c@3100 { + #address-cells = <1>; + #size-cells = <0>; + cell-index = <1>; + compatible = "fsl-i2c"; + reg = <0x3100 0x100>; + interrupts = <0x2b 0x2>; + interrupt-parent = <&mpic>; + dfsrr; + }; + + dma@21300 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,mpc8548-dma", "fsl,eloplus-dma"; + reg = <0x21300 0x4>; + ranges = <0x0 0x21100 0x200>; + cell-index = <0>; + dma-channel@0 { + compatible = "fsl,mpc8548-dma-channel", + "fsl,eloplus-dma-channel"; + reg = <0x0 0x80>; + cell-index = <0>; + interrupt-parent = <&mpic>; + interrupts = <20 2>; + }; + dma-channel@80 { + compatible = "fsl,mpc8548-dma-channel", + "fsl,eloplus-dma-channel"; + reg = <0x80 0x80>; + cell-index = <1>; + interrupt-parent = <&mpic>; + interrupts = <21 2>; + }; + dma-channel@100 { + compatible = "fsl,mpc8548-dma-channel", + "fsl,eloplus-dma-channel"; + reg = <0x100 0x80>; + cell-index = <2>; + interrupt-parent = <&mpic>; + interrupts = <22 2>; + }; + dma-channel@180 { + compatible = "fsl,mpc8548-dma-channel", + "fsl,eloplus-dma-channel"; + reg = <0x180 0x80>; + cell-index = <3>; + interrupt-parent = <&mpic>; + interrupts = <23 2>; + }; + }; + + enet0: ethernet@24000 { + #address-cells = <1>; + #size-cells = <1>; + cell-index = <0>; + device_type = "network"; + model = "eTSEC"; + compatible = "gianfar"; + reg = <0x24000 0x1000>; + ranges = <0x0 0x24000 0x1000>; + local-mac-address = [ 00 00 00 00 00 00 ]; + interrupts = <0x1d 0x2 0x1e 0x2 0x22 0x2>; + interrupt-parent = <&mpic>; + tbi-handle = <&tbi0>; + phy-handle = <&phy0>; + + mdio@520 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,gianfar-mdio"; + reg = <0x520 0x20>; + + phy0: ethernet-phy@19 { + interrupt-parent = <&mpic>; + interrupts = <0x6 0x1>; + reg = <0x19>; + }; + phy1: ethernet-phy@1a { + interrupt-parent = <&mpic>; + interrupts = <0x7 0x1>; + reg = <0x1a>; + }; + tbi0: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + }; + + enet1: ethernet@25000 { + #address-cells = <1>; + #size-cells = <1>; + cell-index = <1>; + device_type = "network"; + model = "eTSEC"; + compatible = "gianfar"; + reg = <0x25000 0x1000>; + ranges = <0x0 0x25000 0x1000>; + local-mac-address = [ 00 00 00 00 00 00 ]; + interrupts = <0x23 0x2 0x24 0x2 0x28 0x2>; + interrupt-parent = <&mpic>; + tbi-handle = <&tbi1>; + phy-handle = <&phy1>; + + mdio@520 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,gianfar-tbi"; + reg = <0x520 0x20>; + + tbi1: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + }; + + serial0: serial@4500 { + cell-index = <0>; + device_type = "serial"; + compatible = "fsl,ns16550", "ns16550"; + reg = <0x4500 0x100>; // reg base, size + clock-frequency = <0>; // should we fill in in uboot? + interrupts = <0x2a 0x2>; + interrupt-parent = <&mpic>; + }; + + serial1: serial@4600 { + cell-index = <1>; + device_type = "serial"; + compatible = "fsl,ns16550", "ns16550"; + reg = <0x4600 0x100>; // reg base, size + clock-frequency = <0>; // should we fill in in uboot? + interrupts = <0x2a 0x2>; + interrupt-parent = <&mpic>; + }; + + global-utilities@e0000 { //global utilities reg + compatible = "fsl,mpc8548-guts"; + reg = <0xe0000 0x1000>; + fsl,has-rstcr; + }; + + crypto@30000 { + compatible = "fsl,sec2.1", "fsl,sec2.0"; + reg = <0x30000 0x10000>; + interrupts = <45 2>; + interrupt-parent = <&mpic>; + fsl,num-channels = <4>; + fsl,channel-fifo-len = <24>; + fsl,exec-units-mask = <0xfe>; + fsl,descriptor-types-mask = <0x12b0ebf>; + }; + + mpic: pic@40000 { + interrupt-controller; + #address-cells = <0>; + #interrupt-cells = <2>; + reg = <0x40000 0x40000>; + compatible = "chrp,open-pic"; + device_type = "open-pic"; + }; + }; + + pci0: pci@e0008000 { + interrupt-map-mask = <0xf800 0x0 0x0 0x7>; + interrupt-map = < + /* IDSEL 0x01 (PCI-X slot) @66MHz */ + 0x0800 0x0 0x0 0x1 &mpic 0x2 0x1 + 0x0800 0x0 0x0 0x2 &mpic 0x3 0x1 + 0x0800 0x0 0x0 0x3 &mpic 0x4 0x1 + 0x0800 0x0 0x0 0x4 &mpic 0x1 0x1 + + /* IDSEL 0x11 (PCI, 3.3V 32bit) @33MHz */ + 0x8800 0x0 0x0 0x1 &mpic 0x2 0x1 + 0x8800 0x0 0x0 0x2 &mpic 0x3 0x1 + 0x8800 0x0 0x0 0x3 &mpic 0x4 0x1 + 0x8800 0x0 0x0 0x4 &mpic 0x1 0x1>; + + interrupt-parent = <&mpic>; + interrupts = <0x18 0x2>; + bus-range = <0 0>; + ranges = <0x02000000 0x0 0x80000000 0x80000000 0x0 0x10000000 + 0x01000000 0x0 0x00000000 0xe2000000 0x0 0x00800000>; + clock-frequency = <66000000>; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + reg = <0xe0008000 0x1000>; + compatible = "fsl,mpc8540-pcix", "fsl,mpc8540-pci"; + device_type = "pci"; + }; + + pci1: pcie@e000a000 { + interrupt-map-mask = <0xf800 0x0 0x0 0x7>; + interrupt-map = < + + /* IDSEL 0x0 (PEX) */ + 0x0000 0x0 0x0 0x1 &mpic 0x0 0x1 + 0x0000 0x0 0x0 0x2 &mpic 0x1 0x1 + 0x0000 0x0 0x0 0x3 &mpic 0x2 0x1 + 0x0000 0x0 0x0 0x4 &mpic 0x3 0x1>; + + interrupt-parent = <&mpic>; + interrupts = <0x1a 0x2>; + bus-range = <0x0 0xff>; + ranges = <0x02000000 0x0 0xa0000000 0xa0000000 0x0 0x10000000 + 0x01000000 0x0 0x00000000 0xe2800000 0x0 0x08000000>; + clock-frequency = <33000000>; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + reg = <0xe000a000 0x1000>; + compatible = "fsl,mpc8548-pcie"; + device_type = "pci"; + pcie@0 { + reg = <0x0 0x0 0x0 0x0 0x0>; + #size-cells = <2>; + #address-cells = <3>; + device_type = "pci"; + ranges = <0x02000000 0x0 0xa0000000 + 0x02000000 0x0 0xa0000000 + 0x0 0x10000000 + + 0x01000000 0x0 0x00000000 + 0x01000000 0x0 0x00000000 + 0x0 0x00800000>; + }; + }; +}; diff --git a/arch/powerpc/boot/dts/sbc8548-pre.dtsi b/arch/powerpc/boot/dts/sbc8548-pre.dtsi new file mode 100644 index 000000000..d8c66290c --- /dev/null +++ b/arch/powerpc/boot/dts/sbc8548-pre.dtsi @@ -0,0 +1,52 @@ +/* + * SBC8548 Device Tree Source + * + * Copyright 2007 Wind River Systems Inc. + * + * Paul Gortmaker (see MAINTAINERS for contact information) + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +/{ + model = "SBC8548"; + compatible = "SBC8548"; + #address-cells = <1>; + #size-cells = <1>; + + aliases { + ethernet0 = &enet0; + ethernet1 = &enet1; + serial0 = &serial0; + serial1 = &serial1; + pci0 = &pci0; + pci1 = &pci1; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + PowerPC,8548@0 { + device_type = "cpu"; + reg = <0>; + d-cache-line-size = <0x20>; // 32 bytes + i-cache-line-size = <0x20>; // 32 bytes + d-cache-size = <0x8000>; // L1, 32K + i-cache-size = <0x8000>; // L1, 32K + timebase-frequency = <0>; // From uboot + bus-frequency = <0>; + clock-frequency = <0>; + next-level-cache = <&L2>; + }; + }; + + memory { + device_type = "memory"; + reg = <0x00000000 0x10000000>; + }; + +}; diff --git a/arch/powerpc/boot/dts/sbc8548.dts b/arch/powerpc/boot/dts/sbc8548.dts new file mode 100644 index 000000000..1df2a0955 --- /dev/null +++ b/arch/powerpc/boot/dts/sbc8548.dts @@ -0,0 +1,110 @@ +/* + * SBC8548 Device Tree Source + * + * Copyright 2007 Wind River Systems Inc. + * + * Paul Gortmaker (see MAINTAINERS for contact information) + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + + +/dts-v1/; + +/include/ "sbc8548-pre.dtsi" + +/{ + localbus@e0000000 { + #address-cells = <2>; + #size-cells = <1>; + compatible = "simple-bus"; + reg = <0xe0000000 0x5000>; + interrupt-parent = <&mpic>; + + ranges = <0x0 0x0 0xff800000 0x00800000 /*8MB Flash*/ + 0x3 0x0 0xf0000000 0x04000000 /*64MB SDRAM*/ + 0x4 0x0 0xf4000000 0x04000000 /*64MB SDRAM*/ + 0x5 0x0 0xf8000000 0x00b10000 /* EPLD */ + 0x6 0x0 0xec000000 0x04000000>; /*64MB Flash*/ + + + flash@0,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "intel,JS28F640", "cfi-flash"; + reg = <0x0 0x0 0x800000>; + bank-width = <1>; + device-width = <1>; + partition@0x0 { + label = "space"; + /* FF800000 -> FFF9FFFF */ + reg = <0x00000000 0x007a0000>; + }; + partition@0x7a0000 { + label = "bootloader"; + /* FFFA0000 -> FFFFFFFF */ + reg = <0x007a0000 0x00060000>; + read-only; + }; + }; + + epld@5,0 { + compatible = "wrs,epld-localbus"; + #address-cells = <2>; + #size-cells = <1>; + reg = <0x5 0x0 0x00b10000>; + ranges = < + 0x0 0x0 0x5 0x000000 0x1fff /* LED */ + 0x1 0x0 0x5 0x100000 0x1fff /* Switches */ + 0x3 0x0 0x5 0x300000 0x1fff /* HW Rev. */ + 0xb 0x0 0x5 0xb00000 0x1fff /* EEPROM */ + >; + + led@0,0 { + compatible = "led"; + reg = <0x0 0x0 0x1fff>; + }; + + switches@1,0 { + compatible = "switches"; + reg = <0x1 0x0 0x1fff>; + }; + + hw-rev@3,0 { + compatible = "hw-rev"; + reg = <0x3 0x0 0x1fff>; + }; + + eeprom@b,0 { + compatible = "eeprom"; + reg = <0xb 0 0x1fff>; + }; + + }; + + alt-flash@6,0 { + #address-cells = <1>; + #size-cells = <1>; + reg = <0x6 0x0 0x04000000>; + compatible = "intel,JS28F128", "cfi-flash"; + bank-width = <4>; + device-width = <1>; + partition@0x0 { + label = "space"; + /* EC000000 -> EFEFFFFF */ + reg = <0x00000000 0x03f00000>; + }; + partition@0x03f00000 { + label = "bootloader"; + /* EFF00000 -> EFFFFFFF */ + reg = <0x03f00000 0x00100000>; + read-only; + }; + }; + }; +}; + +/include/ "sbc8548-post.dtsi" diff --git a/arch/powerpc/boot/dts/sbc8641d.dts b/arch/powerpc/boot/dts/sbc8641d.dts new file mode 100644 index 000000000..631ede72e --- /dev/null +++ b/arch/powerpc/boot/dts/sbc8641d.dts @@ -0,0 +1,455 @@ +/* + * SBC8641D Device Tree Source + * + * Copyright 2008 Wind River Systems Inc. + * + * Paul Gortmaker (see MAINTAINERS for contact information) + * + * Based largely on the mpc8641_hpcn.dts by Freescale Semiconductor Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +/dts-v1/; + +/ { + model = "SBC8641D"; + compatible = "wind,sbc8641"; + #address-cells = <1>; + #size-cells = <1>; + + aliases { + ethernet0 = &enet0; + ethernet1 = &enet1; + ethernet2 = &enet2; + ethernet3 = &enet3; + serial0 = &serial0; + serial1 = &serial1; + pci0 = &pci0; + pci1 = &pci1; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + PowerPC,8641@0 { + device_type = "cpu"; + reg = <0>; + d-cache-line-size = <32>; + i-cache-line-size = <32>; + d-cache-size = <32768>; // L1 + i-cache-size = <32768>; // L1 + timebase-frequency = <0>; // From uboot + bus-frequency = <0>; // From uboot + clock-frequency = <0>; // From uboot + }; + PowerPC,8641@1 { + device_type = "cpu"; + reg = <1>; + d-cache-line-size = <32>; + i-cache-line-size = <32>; + d-cache-size = <32768>; + i-cache-size = <32768>; + timebase-frequency = <0>; // From uboot + bus-frequency = <0>; // From uboot + clock-frequency = <0>; // From uboot + }; + }; + + memory { + device_type = "memory"; + reg = <0x00000000 0x20000000>; // 512M at 0x0 + }; + + localbus@f8005000 { + #address-cells = <2>; + #size-cells = <1>; + compatible = "fsl,mpc8641-localbus", "simple-bus"; + reg = <0xf8005000 0x1000>; + interrupts = <19 2>; + interrupt-parent = <&mpic>; + + ranges = <0 0 0xff000000 0x01000000 // 16MB Boot flash + 1 0 0xf0000000 0x00010000 // 64KB EEPROM + 2 0 0xf1000000 0x00100000 // EPLD (1MB) + 3 0 0xe0000000 0x04000000 // 64MB LB SDRAM (CS3) + 4 0 0xe4000000 0x04000000 // 64MB LB SDRAM (CS4) + 6 0 0xf4000000 0x00100000 // LCD display (1MB) + 7 0 0xe8000000 0x04000000>; // 64MB OneNAND + + flash@0,0 { + compatible = "cfi-flash"; + reg = <0 0 0x01000000>; + bank-width = <2>; + device-width = <2>; + #address-cells = <1>; + #size-cells = <1>; + partition@0 { + label = "dtb"; + reg = <0x00000000 0x00100000>; + read-only; + }; + partition@300000 { + label = "kernel"; + reg = <0x00100000 0x00400000>; + read-only; + }; + partition@400000 { + label = "fs"; + reg = <0x00500000 0x00a00000>; + }; + partition@700000 { + label = "firmware"; + reg = <0x00f00000 0x00100000>; + read-only; + }; + }; + + epld@2,0 { + compatible = "wrs,epld-localbus"; + #address-cells = <2>; + #size-cells = <1>; + reg = <2 0 0x100000>; + ranges = <0 0 5 0 1 // User switches + 1 0 5 1 1 // Board ID/Rev + 3 0 5 3 1>; // LEDs + }; + }; + + soc@f8000000 { + #address-cells = <1>; + #size-cells = <1>; + device_type = "soc"; + compatible = "simple-bus"; + ranges = <0x00000000 0xf8000000 0x00100000>; + bus-frequency = <0>; + + mcm-law@0 { + compatible = "fsl,mcm-law"; + reg = <0x0 0x1000>; + fsl,num-laws = <10>; + }; + + mcm@1000 { + compatible = "fsl,mpc8641-mcm", "fsl,mcm"; + reg = <0x1000 0x1000>; + interrupts = <17 2>; + interrupt-parent = <&mpic>; + }; + + i2c@3000 { + #address-cells = <1>; + #size-cells = <0>; + cell-index = <0>; + compatible = "fsl-i2c"; + reg = <0x3000 0x100>; + interrupts = <43 2>; + interrupt-parent = <&mpic>; + dfsrr; + }; + + i2c@3100 { + #address-cells = <1>; + #size-cells = <0>; + cell-index = <1>; + compatible = "fsl-i2c"; + reg = <0x3100 0x100>; + interrupts = <43 2>; + interrupt-parent = <&mpic>; + dfsrr; + }; + + dma@21300 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,mpc8641-dma", "fsl,eloplus-dma"; + reg = <0x21300 0x4>; + ranges = <0x0 0x21100 0x200>; + cell-index = <0>; + dma-channel@0 { + compatible = "fsl,mpc8641-dma-channel", + "fsl,eloplus-dma-channel"; + reg = <0x0 0x80>; + cell-index = <0>; + interrupt-parent = <&mpic>; + interrupts = <20 2>; + }; + dma-channel@80 { + compatible = "fsl,mpc8641-dma-channel", + "fsl,eloplus-dma-channel"; + reg = <0x80 0x80>; + cell-index = <1>; + interrupt-parent = <&mpic>; + interrupts = <21 2>; + }; + dma-channel@100 { + compatible = "fsl,mpc8641-dma-channel", + "fsl,eloplus-dma-channel"; + reg = <0x100 0x80>; + cell-index = <2>; + interrupt-parent = <&mpic>; + interrupts = <22 2>; + }; + dma-channel@180 { + compatible = "fsl,mpc8641-dma-channel", + "fsl,eloplus-dma-channel"; + reg = <0x180 0x80>; + cell-index = <3>; + interrupt-parent = <&mpic>; + interrupts = <23 2>; + }; + }; + + enet0: ethernet@24000 { + #address-cells = <1>; + #size-cells = <1>; + cell-index = <0>; + device_type = "network"; + model = "TSEC"; + compatible = "gianfar"; + reg = <0x24000 0x1000>; + ranges = <0x0 0x24000 0x1000>; + local-mac-address = [ 00 00 00 00 00 00 ]; + interrupts = <29 2 30 2 34 2>; + interrupt-parent = <&mpic>; + tbi-handle = <&tbi0>; + phy-handle = <&phy0>; + phy-connection-type = "rgmii-id"; + + mdio@520 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,gianfar-mdio"; + reg = <0x520 0x20>; + + phy0: ethernet-phy@1f { + interrupt-parent = <&mpic>; + interrupts = <10 1>; + reg = <0x1f>; + }; + phy1: ethernet-phy@0 { + interrupt-parent = <&mpic>; + interrupts = <10 1>; + reg = <0>; + }; + phy2: ethernet-phy@1 { + interrupt-parent = <&mpic>; + interrupts = <10 1>; + reg = <1>; + }; + phy3: ethernet-phy@2 { + interrupt-parent = <&mpic>; + interrupts = <10 1>; + reg = <2>; + }; + tbi0: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + }; + + enet1: ethernet@25000 { + #address-cells = <1>; + #size-cells = <1>; + cell-index = <1>; + device_type = "network"; + model = "TSEC"; + compatible = "gianfar"; + reg = <0x25000 0x1000>; + ranges = <0x0 0x25000 0x1000>; + local-mac-address = [ 00 00 00 00 00 00 ]; + interrupts = <35 2 36 2 40 2>; + interrupt-parent = <&mpic>; + tbi-handle = <&tbi1>; + phy-handle = <&phy1>; + phy-connection-type = "rgmii-id"; + + mdio@520 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,gianfar-tbi"; + reg = <0x520 0x20>; + + tbi1: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + }; + + enet2: ethernet@26000 { + #address-cells = <1>; + #size-cells = <1>; + cell-index = <2>; + device_type = "network"; + model = "TSEC"; + compatible = "gianfar"; + reg = <0x26000 0x1000>; + ranges = <0x0 0x26000 0x1000>; + local-mac-address = [ 00 00 00 00 00 00 ]; + interrupts = <31 2 32 2 33 2>; + interrupt-parent = <&mpic>; + tbi-handle = <&tbi2>; + phy-handle = <&phy2>; + phy-connection-type = "rgmii-id"; + + mdio@520 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,gianfar-tbi"; + reg = <0x520 0x20>; + + tbi2: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + }; + + enet3: ethernet@27000 { + #address-cells = <1>; + #size-cells = <1>; + cell-index = <3>; + device_type = "network"; + model = "TSEC"; + compatible = "gianfar"; + reg = <0x27000 0x1000>; + ranges = <0x0 0x27000 0x1000>; + local-mac-address = [ 00 00 00 00 00 00 ]; + interrupts = <37 2 38 2 39 2>; + interrupt-parent = <&mpic>; + tbi-handle = <&tbi3>; + phy-handle = <&phy3>; + phy-connection-type = "rgmii-id"; + + mdio@520 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,gianfar-tbi"; + reg = <0x520 0x20>; + + tbi3: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + }; + + serial0: serial@4500 { + cell-index = <0>; + device_type = "serial"; + compatible = "fsl,ns16550", "ns16550"; + reg = <0x4500 0x100>; + clock-frequency = <0>; + interrupts = <42 2>; + interrupt-parent = <&mpic>; + }; + + serial1: serial@4600 { + cell-index = <1>; + device_type = "serial"; + compatible = "fsl,ns16550", "ns16550"; + reg = <0x4600 0x100>; + clock-frequency = <0>; + interrupts = <28 2>; + interrupt-parent = <&mpic>; + }; + + mpic: pic@40000 { + clock-frequency = <0>; + interrupt-controller; + #address-cells = <0>; + #interrupt-cells = <2>; + reg = <0x40000 0x40000>; + compatible = "chrp,open-pic"; + device_type = "open-pic"; + big-endian; + }; + + global-utilities@e0000 { + compatible = "fsl,mpc8641-guts"; + reg = <0xe0000 0x1000>; + fsl,has-rstcr; + }; + }; + + pci0: pcie@f8008000 { + compatible = "fsl,mpc8641-pcie"; + device_type = "pci"; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + reg = <0xf8008000 0x1000>; + bus-range = <0x0 0xff>; + ranges = <0x02000000 0x0 0x80000000 0x80000000 0x0 0x20000000 + 0x01000000 0x0 0x00000000 0xe2000000 0x0 0x00100000>; + clock-frequency = <33333333>; + interrupt-parent = <&mpic>; + interrupts = <24 2>; + interrupt-map-mask = <0xff00 0 0 7>; + interrupt-map = < + /* IDSEL 0x0 */ + 0x0000 0 0 1 &mpic 0 1 + 0x0000 0 0 2 &mpic 1 1 + 0x0000 0 0 3 &mpic 2 1 + 0x0000 0 0 4 &mpic 3 1 + >; + + pcie@0 { + reg = <0 0 0 0 0>; + #size-cells = <2>; + #address-cells = <3>; + device_type = "pci"; + ranges = <0x02000000 0x0 0x80000000 + 0x02000000 0x0 0x80000000 + 0x0 0x20000000 + + 0x01000000 0x0 0x00000000 + 0x01000000 0x0 0x00000000 + 0x0 0x00100000>; + }; + + }; + + pci1: pcie@f8009000 { + compatible = "fsl,mpc8641-pcie"; + device_type = "pci"; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + reg = <0xf8009000 0x1000>; + bus-range = <0 0xff>; + ranges = <0x02000000 0x0 0xa0000000 0xa0000000 0x0 0x20000000 + 0x01000000 0x0 0x00000000 0xe3000000 0x0 0x00100000>; + clock-frequency = <33333333>; + interrupt-parent = <&mpic>; + interrupts = <25 2>; + interrupt-map-mask = <0xf800 0 0 7>; + interrupt-map = < + /* IDSEL 0x0 */ + 0x0000 0 0 1 &mpic 4 1 + 0x0000 0 0 2 &mpic 5 1 + 0x0000 0 0 3 &mpic 6 1 + 0x0000 0 0 4 &mpic 7 1 + >; + + pcie@0 { + reg = <0 0 0 0 0>; + #size-cells = <2>; + #address-cells = <3>; + device_type = "pci"; + ranges = <0x02000000 0x0 0xa0000000 + 0x02000000 0x0 0xa0000000 + 0x0 0x20000000 + + 0x01000000 0x0 0x00000000 + 0x01000000 0x0 0x00000000 + 0x0 0x00100000>; + }; + }; +}; diff --git a/arch/powerpc/boot/dts/sequoia.dts b/arch/powerpc/boot/dts/sequoia.dts new file mode 100644 index 000000000..b1d329246 --- /dev/null +++ b/arch/powerpc/boot/dts/sequoia.dts @@ -0,0 +1,412 @@ +/* + * Device Tree Source for AMCC Sequoia + * + * Based on Bamboo code by Josh Boyer <jwboyer@linux.vnet.ibm.com> + * Copyright (c) 2006, 2007 IBM Corp. + * + * FIXME: Draft only! + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without + * any warranty of any kind, whether express or implied. + * + */ + +/dts-v1/; + +/ { + #address-cells = <2>; + #size-cells = <1>; + model = "amcc,sequoia"; + compatible = "amcc,sequoia"; + dcr-parent = <&{/cpus/cpu@0}>; + + aliases { + ethernet0 = &EMAC0; + ethernet1 = &EMAC1; + serial0 = &UART0; + serial1 = &UART1; + serial2 = &UART2; + serial3 = &UART3; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu@0 { + device_type = "cpu"; + model = "PowerPC,440EPx"; + reg = <0x00000000>; + clock-frequency = <0>; /* Filled in by zImage */ + timebase-frequency = <0>; /* Filled in by zImage */ + i-cache-line-size = <32>; + d-cache-line-size = <32>; + i-cache-size = <32768>; + d-cache-size = <32768>; + dcr-controller; + dcr-access-method = "native"; + }; + }; + + memory { + device_type = "memory"; + reg = <0x00000000 0x00000000 0x00000000>; /* Filled in by zImage */ + }; + + UIC0: interrupt-controller0 { + compatible = "ibm,uic-440epx","ibm,uic"; + interrupt-controller; + cell-index = <0>; + dcr-reg = <0x0c0 0x009>; + #address-cells = <0>; + #size-cells = <0>; + #interrupt-cells = <2>; + }; + + UIC1: interrupt-controller1 { + compatible = "ibm,uic-440epx","ibm,uic"; + interrupt-controller; + cell-index = <1>; + dcr-reg = <0x0d0 0x009>; + #address-cells = <0>; + #size-cells = <0>; + #interrupt-cells = <2>; + interrupts = <0x1e 0x4 0x1f 0x4>; /* cascade */ + interrupt-parent = <&UIC0>; + }; + + UIC2: interrupt-controller2 { + compatible = "ibm,uic-440epx","ibm,uic"; + interrupt-controller; + cell-index = <2>; + dcr-reg = <0x0e0 0x009>; + #address-cells = <0>; + #size-cells = <0>; + #interrupt-cells = <2>; + interrupts = <0x1c 0x4 0x1d 0x4>; /* cascade */ + interrupt-parent = <&UIC0>; + }; + + SDR0: sdr { + compatible = "ibm,sdr-440epx", "ibm,sdr-440ep"; + dcr-reg = <0x00e 0x002>; + }; + + CPR0: cpr { + compatible = "ibm,cpr-440epx", "ibm,cpr-440ep"; + dcr-reg = <0x00c 0x002>; + }; + + plb { + compatible = "ibm,plb-440epx", "ibm,plb4"; + #address-cells = <2>; + #size-cells = <1>; + ranges; + clock-frequency = <0>; /* Filled in by zImage */ + + SDRAM0: sdram { + compatible = "ibm,sdram-440epx", "ibm,sdram-44x-ddr2denali"; + dcr-reg = <0x010 0x002>; + }; + + CRYPTO: crypto@e0100000 { + compatible = "amcc,ppc440epx-crypto","amcc,ppc4xx-crypto"; + reg = <0 0xE0100000 0x80400>; + interrupt-parent = <&UIC0>; + interrupts = <0x17 0x4>; + }; + + rng@e0120000 { + compatible = "amcc,ppc440epx-rng","amcc,ppc4xx-rng"; + reg = <0 0xE0120000 0x150>; + }; + + DMA0: dma { + compatible = "ibm,dma-440epx", "ibm,dma-4xx"; + dcr-reg = <0x100 0x027>; + }; + + MAL0: mcmal { + compatible = "ibm,mcmal-440epx", "ibm,mcmal2"; + dcr-reg = <0x180 0x062>; + num-tx-chans = <2>; + num-rx-chans = <2>; + interrupt-parent = <&MAL0>; + interrupts = <0x0 0x1 0x2 0x3 0x4>; + #interrupt-cells = <1>; + #address-cells = <0>; + #size-cells = <0>; + interrupt-map = </*TXEOB*/ 0x0 &UIC0 0xa 0x4 + /*RXEOB*/ 0x1 &UIC0 0xb 0x4 + /*SERR*/ 0x2 &UIC1 0x0 0x4 + /*TXDE*/ 0x3 &UIC1 0x1 0x4 + /*RXDE*/ 0x4 &UIC1 0x2 0x4>; + interrupt-map-mask = <0xffffffff>; + }; + + USB1: usb@e0000400 { + compatible = "ibm,usb-ohci-440epx", "ohci-be"; + reg = <0x00000000 0xe0000400 0x00000060>; + interrupt-parent = <&UIC0>; + interrupts = <0x15 0x8>; + }; + + USB0: ehci@e0000300 { + compatible = "ibm,usb-ehci-440epx", "usb-ehci"; + interrupt-parent = <&UIC0>; + interrupts = <0x1a 0x4>; + reg = <0x00000000 0xe0000300 0x00000090 0x00000000 0xe0000390 0x00000070>; + big-endian; + }; + + POB0: opb { + compatible = "ibm,opb-440epx", "ibm,opb"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x00000000 0x00000001 0x00000000 0x80000000 + 0x80000000 0x00000001 0x80000000 0x80000000>; + interrupt-parent = <&UIC1>; + interrupts = <0x7 0x4>; + clock-frequency = <0>; /* Filled in by zImage */ + + EBC0: ebc { + compatible = "ibm,ebc-440epx", "ibm,ebc"; + dcr-reg = <0x012 0x002>; + #address-cells = <2>; + #size-cells = <1>; + clock-frequency = <0>; /* Filled in by zImage */ + interrupts = <0x5 0x1>; + interrupt-parent = <&UIC1>; + + nor_flash@0,0 { + compatible = "amd,s29gl256n", "cfi-flash"; + bank-width = <2>; + reg = <0x00000000 0x00000000 0x04000000>; + #address-cells = <1>; + #size-cells = <1>; + partition@0 { + label = "Kernel"; + reg = <0x00000000 0x00180000>; + }; + partition@180000 { + label = "ramdisk"; + reg = <0x00180000 0x00200000>; + }; + partition@380000 { + label = "file system"; + reg = <0x00380000 0x03aa0000>; + }; + partition@3e20000 { + label = "kozio"; + reg = <0x03e20000 0x00140000>; + }; + partition@3f60000 { + label = "env"; + reg = <0x03f60000 0x00040000>; + }; + partition@3fa0000 { + label = "u-boot"; + reg = <0x03fa0000 0x00060000>; + }; + }; + + ndfc@3,0 { + compatible = "ibm,ndfc"; + reg = <0x00000003 0x00000000 0x00002000>; + ccr = <0x00001000>; + bank-settings = <0x80002222>; + #address-cells = <1>; + #size-cells = <1>; + + nand { + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "u-boot"; + reg = <0x00000000 0x00084000>; + }; + partition@84000 { + label = "user"; + reg = <0x00000000 0x01f7c000>; + }; + }; + }; + }; + + UART0: serial@ef600300 { + device_type = "serial"; + compatible = "ns16550"; + reg = <0xef600300 0x00000008>; + virtual-reg = <0xef600300>; + clock-frequency = <0>; /* Filled in by zImage */ + current-speed = <115200>; + interrupt-parent = <&UIC0>; + interrupts = <0x0 0x4>; + }; + + UART1: serial@ef600400 { + device_type = "serial"; + compatible = "ns16550"; + reg = <0xef600400 0x00000008>; + virtual-reg = <0xef600400>; + clock-frequency = <0>; + current-speed = <0>; + interrupt-parent = <&UIC0>; + interrupts = <0x1 0x4>; + }; + + UART2: serial@ef600500 { + device_type = "serial"; + compatible = "ns16550"; + reg = <0xef600500 0x00000008>; + virtual-reg = <0xef600500>; + clock-frequency = <0>; + current-speed = <0>; + interrupt-parent = <&UIC1>; + interrupts = <0x3 0x4>; + }; + + UART3: serial@ef600600 { + device_type = "serial"; + compatible = "ns16550"; + reg = <0xef600600 0x00000008>; + virtual-reg = <0xef600600>; + clock-frequency = <0>; + current-speed = <0>; + interrupt-parent = <&UIC1>; + interrupts = <0x4 0x4>; + }; + + IIC0: i2c@ef600700 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "ibm,iic-440epx", "ibm,iic"; + reg = <0xef600700 0x00000014>; + interrupt-parent = <&UIC0>; + interrupts = <0x2 0x4>; + + hwmon@48 { + compatible = "adi,ad7414"; + reg = <0x48>; + }; + }; + + IIC1: i2c@ef600800 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "ibm,iic-440epx", "ibm,iic"; + reg = <0xef600800 0x00000014>; + interrupt-parent = <&UIC0>; + interrupts = <0x7 0x4>; + }; + + ZMII0: emac-zmii@ef600d00 { + compatible = "ibm,zmii-440epx", "ibm,zmii"; + reg = <0xef600d00 0x0000000c>; + }; + + RGMII0: emac-rgmii@ef601000 { + compatible = "ibm,rgmii-440epx", "ibm,rgmii"; + reg = <0xef601000 0x00000008>; + has-mdio; + }; + + EMAC0: ethernet@ef600e00 { + device_type = "network"; + compatible = "ibm,emac-440epx", "ibm,emac4"; + interrupt-parent = <&EMAC0>; + interrupts = <0x0 0x1>; + #interrupt-cells = <1>; + #address-cells = <0>; + #size-cells = <0>; + interrupt-map = </*Status*/ 0x0 &UIC0 0x18 0x4 + /*Wake*/ 0x1 &UIC1 0x1d 0x4>; + reg = <0xef600e00 0x00000074>; + local-mac-address = [000000000000]; + mal-device = <&MAL0>; + mal-tx-channel = <0>; + mal-rx-channel = <0>; + cell-index = <0>; + max-frame-size = <9000>; + rx-fifo-size = <4096>; + tx-fifo-size = <2048>; + phy-mode = "rgmii"; + phy-map = <0x00000000>; + zmii-device = <&ZMII0>; + zmii-channel = <0>; + rgmii-device = <&RGMII0>; + rgmii-channel = <0>; + has-inverted-stacr-oc; + has-new-stacr-staopc; + }; + + EMAC1: ethernet@ef600f00 { + device_type = "network"; + compatible = "ibm,emac-440epx", "ibm,emac4"; + interrupt-parent = <&EMAC1>; + interrupts = <0x0 0x1>; + #interrupt-cells = <1>; + #address-cells = <0>; + #size-cells = <0>; + interrupt-map = </*Status*/ 0x0 &UIC0 0x19 0x4 + /*Wake*/ 0x1 &UIC1 0x1f 0x4>; + reg = <0xef600f00 0x00000074>; + local-mac-address = [000000000000]; + mal-device = <&MAL0>; + mal-tx-channel = <1>; + mal-rx-channel = <1>; + cell-index = <1>; + max-frame-size = <9000>; + rx-fifo-size = <4096>; + tx-fifo-size = <2048>; + phy-mode = "rgmii"; + phy-map = <0x00000000>; + zmii-device = <&ZMII0>; + zmii-channel = <1>; + rgmii-device = <&RGMII0>; + rgmii-channel = <1>; + has-inverted-stacr-oc; + has-new-stacr-staopc; + }; + }; + + PCI0: pci@1ec000000 { + device_type = "pci"; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + compatible = "ibm,plb440epx-pci", "ibm,plb-pci"; + primary; + reg = <0x00000001 0xeec00000 0x00000008 /* Config space access */ + 0x00000001 0xeed00000 0x00000004 /* IACK */ + 0x00000001 0xeed00000 0x00000004 /* Special cycle */ + 0x00000001 0xef400000 0x00000040>; /* Internal registers */ + + /* Outbound ranges, one memory and one IO, + * later cannot be changed. Chip supports a second + * IO range but we don't use it for now + * From the 440EPx user manual: + * PCI 1 Memory 1 8000 0000 1 BFFF FFFF 1GB + * I/O 1 E800 0000 1 E800 FFFF 64KB + * I/O 1 E880 0000 1 EBFF FFFF 56MB + */ + ranges = <0x02000000 0x00000000 0x80000000 0x00000001 0x80000000 0x00000000 0x40000000 + 0x01000000 0x00000000 0x00000000 0x00000001 0xe8000000 0x00000000 0x00010000 + 0x01000000 0x00000000 0x00000000 0x00000001 0xe8800000 0x00000000 0x03800000>; + + /* Inbound 2GB range starting at 0 */ + dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x0 0x80000000>; + + /* All PCI interrupts are routed to IRQ 67 */ + interrupt-map-mask = <0x0 0x0 0x0 0x0>; + interrupt-map = < 0x0 0x0 0x0 0x0 &UIC2 0x3 0x8 >; + }; + }; + + chosen { + linux,stdout-path = "/plb/opb/serial@ef600300"; + bootargs = "console=ttyS0,115200"; + }; +}; diff --git a/arch/powerpc/boot/dts/socrates.dts b/arch/powerpc/boot/dts/socrates.dts new file mode 100644 index 000000000..134a5ff91 --- /dev/null +++ b/arch/powerpc/boot/dts/socrates.dts @@ -0,0 +1,352 @@ +/* + * Device Tree Source for the Socrates board (MPC8544). + * + * Copyright (c) 2008 Emcraft Systems. + * Sergei Poselenov, <sposelenov@emcraft.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +/dts-v1/; + +/ { + model = "abb,socrates"; + compatible = "abb,socrates"; + #address-cells = <1>; + #size-cells = <1>; + + aliases { + ethernet0 = &enet0; + ethernet1 = &enet1; + serial0 = &serial0; + serial1 = &serial1; + pci0 = &pci0; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + PowerPC,8544@0 { + device_type = "cpu"; + reg = <0>; + d-cache-line-size = <32>; + i-cache-line-size = <32>; + d-cache-size = <0x8000>; // L1, 32K + i-cache-size = <0x8000>; // L1, 32K + timebase-frequency = <0>; + bus-frequency = <0>; + clock-frequency = <0>; + next-level-cache = <&L2>; + }; + }; + + memory { + device_type = "memory"; + reg = <0x00000000 0x00000000>; // Filled in by U-Boot + }; + + soc8544@e0000000 { + #address-cells = <1>; + #size-cells = <1>; + device_type = "soc"; + + ranges = <0x00000000 0xe0000000 0x00100000>; + bus-frequency = <0>; // Filled in by U-Boot + compatible = "fsl,mpc8544-immr", "simple-bus"; + + ecm-law@0 { + compatible = "fsl,ecm-law"; + reg = <0x0 0x1000>; + fsl,num-laws = <10>; + }; + + ecm@1000 { + compatible = "fsl,mpc8544-ecm", "fsl,ecm"; + reg = <0x1000 0x1000>; + interrupts = <17 2>; + interrupt-parent = <&mpic>; + }; + + memory-controller@2000 { + compatible = "fsl,mpc8544-memory-controller"; + reg = <0x2000 0x1000>; + interrupt-parent = <&mpic>; + interrupts = <18 2>; + }; + + L2: l2-cache-controller@20000 { + compatible = "fsl,mpc8544-l2-cache-controller"; + reg = <0x20000 0x1000>; + cache-line-size = <32>; + cache-size = <0x40000>; // L2, 256K + interrupt-parent = <&mpic>; + interrupts = <16 2>; + }; + + i2c@3000 { + #address-cells = <1>; + #size-cells = <0>; + cell-index = <0>; + compatible = "fsl,mpc8544-i2c", "fsl-i2c"; + reg = <0x3000 0x100>; + interrupts = <43 2>; + interrupt-parent = <&mpic>; + fsl,preserve-clocking; + + dtt@28 { + compatible = "winbond,w83782d"; + reg = <0x28>; + }; + rtc@32 { + compatible = "epson,rx8025"; + reg = <0x32>; + interrupts = <7 1>; + interrupt-parent = <&mpic>; + }; + dtt@4c { + compatible = "dallas,ds75"; + reg = <0x4c>; + }; + ts@4a { + compatible = "ti,tsc2003"; + reg = <0x4a>; + interrupt-parent = <&mpic>; + interrupts = <8 1>; + }; + }; + + i2c@3100 { + #address-cells = <1>; + #size-cells = <0>; + cell-index = <1>; + compatible = "fsl,mpc8544-i2c", "fsl-i2c"; + reg = <0x3100 0x100>; + interrupts = <43 2>; + interrupt-parent = <&mpic>; + fsl,preserve-clocking; + }; + + enet0: ethernet@24000 { + #address-cells = <1>; + #size-cells = <1>; + cell-index = <0>; + device_type = "network"; + model = "eTSEC"; + compatible = "gianfar"; + reg = <0x24000 0x1000>; + ranges = <0x0 0x24000 0x1000>; + local-mac-address = [ 00 00 00 00 00 00 ]; + interrupts = <29 2 30 2 34 2>; + interrupt-parent = <&mpic>; + phy-handle = <&phy0>; + tbi-handle = <&tbi0>; + phy-connection-type = "rgmii-id"; + + mdio@520 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,gianfar-mdio"; + reg = <0x520 0x20>; + + phy0: ethernet-phy@0 { + interrupt-parent = <&mpic>; + interrupts = <0 1>; + reg = <0>; + }; + phy1: ethernet-phy@1 { + interrupt-parent = <&mpic>; + interrupts = <0 1>; + reg = <1>; + }; + tbi0: tbi-phy@11 { + reg = <0x11>; + }; + }; + }; + + enet1: ethernet@26000 { + #address-cells = <1>; + #size-cells = <1>; + cell-index = <1>; + device_type = "network"; + model = "eTSEC"; + compatible = "gianfar"; + reg = <0x26000 0x1000>; + ranges = <0x0 0x26000 0x1000>; + local-mac-address = [ 00 00 00 00 00 00 ]; + interrupts = <31 2 32 2 33 2>; + interrupt-parent = <&mpic>; + phy-handle = <&phy1>; + tbi-handle = <&tbi1>; + phy-connection-type = "rgmii-id"; + + mdio@520 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,gianfar-tbi"; + reg = <0x520 0x20>; + + tbi1: tbi-phy@11 { + reg = <0x11>; + }; + }; + }; + + serial0: serial@4500 { + cell-index = <0>; + device_type = "serial"; + compatible = "fsl,ns16550", "ns16550"; + reg = <0x4500 0x100>; + clock-frequency = <0>; + interrupts = <42 2>; + interrupt-parent = <&mpic>; + }; + + serial1: serial@4600 { + cell-index = <1>; + device_type = "serial"; + compatible = "fsl,ns16550", "ns16550"; + reg = <0x4600 0x100>; + clock-frequency = <0>; + interrupts = <42 2>; + interrupt-parent = <&mpic>; + }; + + global-utilities@e0000 { //global utilities block + compatible = "fsl,mpc8548-guts"; + reg = <0xe0000 0x1000>; + fsl,has-rstcr; + }; + + mpic: pic@40000 { + interrupt-controller; + #address-cells = <0>; + #interrupt-cells = <2>; + reg = <0x40000 0x40000>; + compatible = "chrp,open-pic"; + device_type = "open-pic"; + }; + }; + + + localbus { + compatible = "fsl,mpc8544-localbus", + "fsl,pq3-localbus", + "simple-bus"; + #address-cells = <2>; + #size-cells = <1>; + reg = <0xe0005000 0x40>; + interrupt-parent = <&mpic>; + interrupts = <19 2>; + + ranges = <0 0 0xfc000000 0x04000000 + 2 0 0xc8000000 0x04000000 + 3 0 0xc0000000 0x00100000 + >; /* Overwritten by U-Boot */ + + nor_flash@0,0 { + compatible = "amd,s29gl256n", "cfi-flash"; + bank-width = <2>; + reg = <0x0 0x000000 0x4000000>; + #address-cells = <1>; + #size-cells = <1>; + partition@0 { + label = "kernel"; + reg = <0x0 0x1e0000>; + read-only; + }; + partition@1e0000 { + label = "dtb"; + reg = <0x1e0000 0x20000>; + }; + partition@200000 { + label = "root"; + reg = <0x200000 0x200000>; + }; + partition@400000 { + label = "user"; + reg = <0x400000 0x3b80000>; + }; + partition@3f80000 { + label = "env"; + reg = <0x3f80000 0x40000>; + read-only; + }; + partition@3fc0000 { + label = "u-boot"; + reg = <0x3fc0000 0x40000>; + read-only; + }; + }; + + display@2,0 { + compatible = "fujitsu,lime"; + reg = <2 0x0 0x4000000>; + interrupt-parent = <&mpic>; + interrupts = <6 1>; + }; + + fpga_pic: fpga-pic@3,10 { + compatible = "abb,socrates-fpga-pic"; + reg = <3 0x10 0x10>; + interrupt-controller; + /* IRQs 2, 10, 11, active low, level-sensitive */ + interrupts = <2 1 10 1 11 1>; + interrupt-parent = <&mpic>; + #interrupt-cells = <3>; + }; + + spi@3,60 { + compatible = "abb,socrates-spi"; + reg = <3 0x60 0x10>; + interrupts = <8 4 0>; // number, type, routing + interrupt-parent = <&fpga_pic>; + }; + + nand@3,70 { + compatible = "abb,socrates-nand"; + reg = <3 0x70 0x04>; + bank-width = <1>; + #address-cells = <1>; + #size-cells = <1>; + data@0 { + label = "data"; + reg = <0x0 0x40000000>; + }; + }; + + can@3,100 { + compatible = "philips,sja1000"; + reg = <3 0x100 0x80>; + interrupts = <2 8 1>; // number, type, routing + interrupt-parent = <&fpga_pic>; + }; + }; + + pci0: pci@e0008000 { + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + compatible = "fsl,mpc8540-pci"; + device_type = "pci"; + reg = <0xe0008000 0x1000>; + clock-frequency = <66666666>; + + interrupt-map-mask = <0xf800 0x0 0x0 0x7>; + interrupt-map = < + /* IDSEL 0x11 */ + 0x8800 0x0 0x0 1 &mpic 5 1 + /* IDSEL 0x12 */ + 0x9000 0x0 0x0 1 &mpic 4 1>; + interrupt-parent = <&mpic>; + interrupts = <24 2>; + bus-range = <0x0 0x0>; + ranges = <0x02000000 0x0 0x80000000 0x80000000 0x0 0x20000000 + 0x01000000 0x0 0x00000000 0xe2000000 0x0 0x01000000>; + }; + +}; diff --git a/arch/powerpc/boot/dts/storcenter.dts b/arch/powerpc/boot/dts/storcenter.dts new file mode 100644 index 000000000..2a5557385 --- /dev/null +++ b/arch/powerpc/boot/dts/storcenter.dts @@ -0,0 +1,142 @@ +/* + * Device Tree Source for IOMEGA StorCenter + * + * Copyright 2007 Oyvind Repvik + * Copyright 2007 Jon Loeliger + * + * Based on the Kurobox DTS by G. Liakhovetski <g.liakhovetski@gmx.de> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +/dts-v1/; + +/ { + model = "StorCenter"; + compatible = "iomega,storcenter"; + #address-cells = <1>; + #size-cells = <1>; + + aliases { + serial0 = &serial0; + serial1 = &serial1; + pci0 = &pci0; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + PowerPC,8241@0 { + device_type = "cpu"; + reg = <0>; + clock-frequency = <200000000>; + timebase-frequency = <25000000>; + bus-frequency = <0>; /* from bootwrapper */ + i-cache-line-size = <32>; + d-cache-line-size = <32>; + i-cache-size = <16384>; + d-cache-size = <16384>; + }; + }; + + memory { + device_type = "memory"; + reg = <0x00000000 0x04000000>; /* 64MB @ 0x0 */ + }; + + soc@fc000000 { + #address-cells = <1>; + #size-cells = <1>; + device_type = "soc"; + compatible = "fsl,mpc8241", "mpc10x"; + store-gathering = <0>; /* 0 == off, !0 == on */ + ranges = <0x0 0xfc000000 0x100000>; + reg = <0xfc000000 0x100000>; /* EUMB */ + bus-frequency = <0>; /* fixed by loader */ + + i2c@3000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl-i2c"; + reg = <0x3000 0x100>; + interrupts = <17 2>; + interrupt-parent = <&mpic>; + + rtc@68 { + compatible = "dallas,ds1337"; + reg = <0x68>; + }; + }; + + serial0: serial@4500 { + cell-index = <0>; + device_type = "serial"; + compatible = "fsl,ns16550", "ns16550"; + reg = <0x4500 0x20>; + clock-frequency = <97553800>; /* Hz */ + current-speed = <115200>; + interrupts = <25 2>; + interrupt-parent = <&mpic>; + }; + + serial1: serial@4600 { + cell-index = <1>; + device_type = "serial"; + compatible = "fsl,ns16550", "ns16550"; + reg = <0x4600 0x20>; + clock-frequency = <97553800>; /* Hz */ + current-speed = <9600>; + interrupts = <26 2>; + interrupt-parent = <&mpic>; + }; + + mpic: interrupt-controller@40000 { + #interrupt-cells = <2>; + #address-cells = <0>; + device_type = "open-pic"; + compatible = "chrp,open-pic"; + interrupt-controller; + reg = <0x40000 0x40000>; + }; + + }; + + pci0: pci@fe800000 { + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + device_type = "pci"; + compatible = "mpc10x-pci"; + reg = <0xfe800000 0x1000>; + ranges = <0x01000000 0x0 0x0 0xfe000000 0x0 0x00c00000 + 0x02000000 0x0 0x80000000 0x80000000 0x0 0x70000000>; + bus-range = <0 0xff>; + clock-frequency = <97553800>; + interrupt-parent = <&mpic>; + interrupt-map-mask = <0xf800 0 0 7>; + interrupt-map = < + /* IDSEL 13 - IDE */ + 0x6800 0 0 1 &mpic 0 1 + 0x6800 0 0 2 &mpic 0 1 + 0x6800 0 0 3 &mpic 0 1 + 0x6800 0 0 4 &mpic 0 1 + /* IDSEL 14 - USB */ + 0x7000 0 0 1 &mpic 0 1 + 0x7000 0 0 2 &mpic 0 1 + 0x7000 0 0 3 &mpic 0 1 + 0x7000 0 0 4 &mpic 0 1 + /* IDSEL 15 - ETH */ + 0x7800 0 0 1 &mpic 0 1 + 0x7800 0 0 2 &mpic 0 1 + 0x7800 0 0 3 &mpic 0 1 + 0x7800 0 0 4 &mpic 0 1 + >; + }; + + chosen { + linux,stdout-path = &serial0; + }; +}; diff --git a/arch/powerpc/boot/dts/stx_gp3_8560.dts b/arch/powerpc/boot/dts/stx_gp3_8560.dts new file mode 100644 index 000000000..78a72ee48 --- /dev/null +++ b/arch/powerpc/boot/dts/stx_gp3_8560.dts @@ -0,0 +1,304 @@ +/* + * STX GP3 - 8560 ADS Device Tree Source + * + * Copyright 2008 Freescale Semiconductor Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +/dts-v1/; + +/ { + model = "stx,gp3"; + compatible = "stx,gp3-8560", "stx,gp3"; + #address-cells = <1>; + #size-cells = <1>; + + aliases { + ethernet0 = &enet0; + ethernet1 = &enet1; + serial0 = &serial0; + pci0 = &pci0; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + PowerPC,8560@0 { + device_type = "cpu"; + reg = <0>; + d-cache-line-size = <32>; + i-cache-line-size = <32>; + d-cache-size = <32768>; + i-cache-size = <32768>; + timebase-frequency = <0>; + bus-frequency = <0>; + clock-frequency = <0>; + next-level-cache = <&L2>; + }; + }; + + memory { + device_type = "memory"; + reg = <0x00000000 0x10000000>; + }; + + soc@fdf00000 { + #address-cells = <1>; + #size-cells = <1>; + device_type = "soc"; + ranges = <0 0xfdf00000 0x100000>; + bus-frequency = <0>; + compatible = "fsl,mpc8560-immr", "simple-bus"; + + ecm-law@0 { + compatible = "fsl,ecm-law"; + reg = <0x0 0x1000>; + fsl,num-laws = <8>; + }; + + ecm@1000 { + compatible = "fsl,mpc8560-ecm", "fsl,ecm"; + reg = <0x1000 0x1000>; + interrupts = <17 2>; + interrupt-parent = <&mpic>; + }; + + memory-controller@2000 { + compatible = "fsl,mpc8540-memory-controller"; + reg = <0x2000 0x1000>; + interrupt-parent = <&mpic>; + interrupts = <18 2>; + }; + + L2: l2-cache-controller@20000 { + compatible = "fsl,mpc8540-l2-cache-controller"; + reg = <0x20000 0x1000>; + cache-line-size = <32>; + cache-size = <0x40000>; // L2, 256K + interrupt-parent = <&mpic>; + interrupts = <16 2>; + }; + + i2c@3000 { + #address-cells = <1>; + #size-cells = <0>; + cell-index = <0>; + compatible = "fsl-i2c"; + reg = <0x3000 0x100>; + interrupts = <43 2>; + interrupt-parent = <&mpic>; + dfsrr; + }; + + dma@21300 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,mpc8560-dma", "fsl,eloplus-dma"; + reg = <0x21300 0x4>; + ranges = <0x0 0x21100 0x200>; + cell-index = <0>; + dma-channel@0 { + compatible = "fsl,mpc8560-dma-channel", + "fsl,eloplus-dma-channel"; + reg = <0x0 0x80>; + cell-index = <0>; + interrupt-parent = <&mpic>; + interrupts = <20 2>; + }; + dma-channel@80 { + compatible = "fsl,mpc8560-dma-channel", + "fsl,eloplus-dma-channel"; + reg = <0x80 0x80>; + cell-index = <1>; + interrupt-parent = <&mpic>; + interrupts = <21 2>; + }; + dma-channel@100 { + compatible = "fsl,mpc8560-dma-channel", + "fsl,eloplus-dma-channel"; + reg = <0x100 0x80>; + cell-index = <2>; + interrupt-parent = <&mpic>; + interrupts = <22 2>; + }; + dma-channel@180 { + compatible = "fsl,mpc8560-dma-channel", + "fsl,eloplus-dma-channel"; + reg = <0x180 0x80>; + cell-index = <3>; + interrupt-parent = <&mpic>; + interrupts = <23 2>; + }; + }; + + enet0: ethernet@24000 { + #address-cells = <1>; + #size-cells = <1>; + cell-index = <0>; + device_type = "network"; + model = "TSEC"; + compatible = "gianfar"; + reg = <0x24000 0x1000>; + ranges = <0x0 0x24000 0x1000>; + local-mac-address = [ 00 00 00 00 00 00 ]; + interrupts = <29 2 30 2 34 2>; + interrupt-parent = <&mpic>; + tbi-handle = <&tbi0>; + phy-handle = <&phy2>; + + mdio@520 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,gianfar-mdio"; + reg = <0x520 0x20>; + + phy2: ethernet-phy@2 { + interrupt-parent = <&mpic>; + interrupts = <5 4>; + reg = <2>; + }; + phy4: ethernet-phy@4 { + interrupt-parent = <&mpic>; + interrupts = <5 4>; + reg = <4>; + }; + tbi0: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + }; + + enet1: ethernet@25000 { + #address-cells = <1>; + #size-cells = <1>; + cell-index = <1>; + device_type = "network"; + model = "TSEC"; + compatible = "gianfar"; + reg = <0x25000 0x1000>; + ranges = <0x0 0x25000 0x1000>; + local-mac-address = [ 00 00 00 00 00 00 ]; + interrupts = <35 2 36 2 40 2>; + interrupt-parent = <&mpic>; + tbi-handle = <&tbi1>; + phy-handle = <&phy4>; + + mdio@520 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,gianfar-tbi"; + reg = <0x520 0x20>; + + tbi1: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + }; + + mpic: pic@40000 { + interrupt-controller; + #address-cells = <0>; + #interrupt-cells = <2>; + reg = <0x40000 0x40000>; + compatible = "chrp,open-pic"; + device_type = "open-pic"; + }; + + cpm@919c0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,mpc8560-cpm", "fsl,cpm2", "simple-bus"; + reg = <0x919c0 0x30>; + ranges; + + muram@80000 { + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x80000 0x10000>; + + data@0 { + compatible = "fsl,cpm-muram-data"; + reg = <0 0x4000 0x9000 0x2000>; + }; + }; + + brg@919f0 { + compatible = "fsl,mpc8560-brg", + "fsl,cpm2-brg", + "fsl,cpm-brg"; + reg = <0x919f0 0x10 0x915f0 0x10>; + clock-frequency = <0>; + }; + + cpmpic: pic@90c00 { + interrupt-controller; + #address-cells = <0>; + #interrupt-cells = <2>; + interrupts = <46 2>; + interrupt-parent = <&mpic>; + reg = <0x90c00 0x80>; + compatible = "fsl,mpc8560-cpm-pic", "fsl,cpm2-pic"; + }; + + serial0: serial@91a20 { + device_type = "serial"; + compatible = "fsl,mpc8560-scc-uart", + "fsl,cpm2-scc-uart"; + reg = <0x91a20 0x20 0x88100 0x100>; + fsl,cpm-brg = <2>; + fsl,cpm-command = <0x4a00000>; + interrupts = <41 8>; + interrupt-parent = <&cpmpic>; + }; + }; + }; + + pci0: pci@fdf08000 { + interrupt-map-mask = <0xf800 0x0 0x0 0x7>; + interrupt-map = < + + /* IDSEL 0x0c */ + 0x6000 0 0 1 &mpic 1 1 + 0x6000 0 0 2 &mpic 2 1 + 0x6000 0 0 3 &mpic 3 1 + 0x6000 0 0 4 &mpic 4 1 + + /* IDSEL 0x0d */ + 0x6800 0 0 1 &mpic 4 1 + 0x6800 0 0 2 &mpic 1 1 + 0x6800 0 0 3 &mpic 2 1 + 0x6800 0 0 4 &mpic 3 1 + + /* IDSEL 0x0e */ + 0x7000 0 0 1 &mpic 3 1 + 0x7000 0 0 2 &mpic 4 1 + 0x7000 0 0 3 &mpic 1 1 + 0x7000 0 0 4 &mpic 2 1 + + /* IDSEL 0x0f */ + 0x7800 0 0 1 &mpic 2 1 + 0x7800 0 0 2 &mpic 3 1 + 0x7800 0 0 3 &mpic 4 1 + 0x7800 0 0 4 &mpic 1 1>; + + interrupt-parent = <&mpic>; + interrupts = <24 2>; + bus-range = <0 0>; + ranges = <0x02000000 0 0x80000000 0x80000000 0 0x20000000 + 0x01000000 0 0x00000000 0xe2000000 0 0x00100000>; + clock-frequency = <66666666>; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + reg = <0xfdf08000 0x1000>; + compatible = "fsl,mpc8540-pcix", "fsl,mpc8540-pci"; + device_type = "pci"; + }; +}; diff --git a/arch/powerpc/boot/dts/stxssa8555.dts b/arch/powerpc/boot/dts/stxssa8555.dts new file mode 100644 index 000000000..859f854ba --- /dev/null +++ b/arch/powerpc/boot/dts/stxssa8555.dts @@ -0,0 +1,378 @@ +/* + * MPC8555-based STx GP3 Device Tree Source + * + * Copyright 2006, 2008 Freescale Semiconductor Inc. + * + * Copyright 2010 Silicon Turnkey Express LLC. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +/dts-v1/; + +/ { + model = "stx,gp3"; + compatible = "stx,gp3-8560", "stx,gp3"; + #address-cells = <1>; + #size-cells = <1>; + + aliases { + ethernet0 = &enet0; + ethernet1 = &enet1; + serial0 = &serial0; + serial1 = &serial1; + pci0 = &pci0; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + PowerPC,8555@0 { + device_type = "cpu"; + reg = <0x0>; + d-cache-line-size = <32>; // 32 bytes + i-cache-line-size = <32>; // 32 bytes + d-cache-size = <0x8000>; // L1, 32K + i-cache-size = <0x8000>; // L1, 32K + timebase-frequency = <0>; // 33 MHz, from uboot + bus-frequency = <0>; // 166 MHz + clock-frequency = <0>; // 825 MHz, from uboot + next-level-cache = <&L2>; + }; + }; + + memory { + device_type = "memory"; + reg = <0x00000000 0x10000000>; + }; + + soc8555@e0000000 { + #address-cells = <1>; + #size-cells = <1>; + device_type = "soc"; + compatible = "simple-bus"; + ranges = <0x0 0xe0000000 0x100000>; + bus-frequency = <0>; + + ecm-law@0 { + compatible = "fsl,ecm-law"; + reg = <0x0 0x1000>; + fsl,num-laws = <8>; + }; + + ecm@1000 { + compatible = "fsl,mpc8555-ecm", "fsl,ecm"; + reg = <0x1000 0x1000>; + interrupts = <17 2>; + interrupt-parent = <&mpic>; + }; + + memory-controller@2000 { + compatible = "fsl,mpc8555-memory-controller"; + reg = <0x2000 0x1000>; + interrupt-parent = <&mpic>; + interrupts = <18 2>; + }; + + L2: l2-cache-controller@20000 { + compatible = "fsl,mpc8555-l2-cache-controller"; + reg = <0x20000 0x1000>; + cache-line-size = <32>; // 32 bytes + cache-size = <0x40000>; // L2, 256K + interrupt-parent = <&mpic>; + interrupts = <16 2>; + }; + + i2c@3000 { + #address-cells = <1>; + #size-cells = <0>; + cell-index = <0>; + compatible = "fsl-i2c"; + reg = <0x3000 0x100>; + interrupts = <43 2>; + interrupt-parent = <&mpic>; + dfsrr; + }; + + dma@21300 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,mpc8555-dma", "fsl,eloplus-dma"; + reg = <0x21300 0x4>; + ranges = <0x0 0x21100 0x200>; + cell-index = <0>; + dma-channel@0 { + compatible = "fsl,mpc8555-dma-channel", + "fsl,eloplus-dma-channel"; + reg = <0x0 0x80>; + cell-index = <0>; + interrupt-parent = <&mpic>; + interrupts = <20 2>; + }; + dma-channel@80 { + compatible = "fsl,mpc8555-dma-channel", + "fsl,eloplus-dma-channel"; + reg = <0x80 0x80>; + cell-index = <1>; + interrupt-parent = <&mpic>; + interrupts = <21 2>; + }; + dma-channel@100 { + compatible = "fsl,mpc8555-dma-channel", + "fsl,eloplus-dma-channel"; + reg = <0x100 0x80>; + cell-index = <2>; + interrupt-parent = <&mpic>; + interrupts = <22 2>; + }; + dma-channel@180 { + compatible = "fsl,mpc8555-dma-channel", + "fsl,eloplus-dma-channel"; + reg = <0x180 0x80>; + cell-index = <3>; + interrupt-parent = <&mpic>; + interrupts = <23 2>; + }; + }; + + enet0: ethernet@24000 { + #address-cells = <1>; + #size-cells = <1>; + cell-index = <0>; + device_type = "network"; + model = "TSEC"; + compatible = "gianfar"; + reg = <0x24000 0x1000>; + ranges = <0x0 0x24000 0x1000>; + local-mac-address = [ 00 00 00 00 00 00 ]; + interrupts = <29 2 30 2 34 2>; + interrupt-parent = <&mpic>; + tbi-handle = <&tbi0>; + phy-handle = <&phy0>; + + mdio@520 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,gianfar-mdio"; + reg = <0x520 0x20>; + + phy0: ethernet-phy@2 { + interrupt-parent = <&mpic>; + interrupts = <5 1>; + reg = <0x2>; + }; + phy1: ethernet-phy@4 { + interrupt-parent = <&mpic>; + interrupts = <5 1>; + reg = <0x4>; + }; + tbi0: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + }; + + enet1: ethernet@25000 { + #address-cells = <1>; + #size-cells = <1>; + cell-index = <1>; + device_type = "network"; + model = "TSEC"; + compatible = "gianfar"; + reg = <0x25000 0x1000>; + ranges = <0x0 0x25000 0x1000>; + local-mac-address = [ 00 00 00 00 00 00 ]; + interrupts = <35 2 36 2 40 2>; + interrupt-parent = <&mpic>; + tbi-handle = <&tbi1>; + phy-handle = <&phy1>; + + mdio@520 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,gianfar-tbi"; + reg = <0x520 0x20>; + + tbi1: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + }; + + serial0: serial@4500 { + cell-index = <0>; + device_type = "serial"; + compatible = "fsl,ns16550", "ns16550"; + reg = <0x4500 0x100>; // reg base, size + clock-frequency = <0>; // should we fill in in uboot? + interrupts = <42 2>; + interrupt-parent = <&mpic>; + }; + + serial1: serial@4600 { + cell-index = <1>; + device_type = "serial"; + compatible = "fsl,ns16550", "ns16550"; + reg = <0x4600 0x100>; // reg base, size + clock-frequency = <0>; // should we fill in in uboot? + interrupts = <42 2>; + interrupt-parent = <&mpic>; + }; + + crypto@30000 { + compatible = "fsl,sec2.0"; + reg = <0x30000 0x10000>; + interrupts = <45 2>; + interrupt-parent = <&mpic>; + fsl,num-channels = <4>; + fsl,channel-fifo-len = <24>; + fsl,exec-units-mask = <0x7e>; + fsl,descriptor-types-mask = <0x01010ebf>; + }; + + mpic: pic@40000 { + interrupt-controller; + #address-cells = <0>; + #interrupt-cells = <2>; + reg = <0x40000 0x40000>; + compatible = "chrp,open-pic"; + device_type = "open-pic"; + }; + + cpm@919c0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,mpc8555-cpm", "fsl,cpm2"; + reg = <0x919c0 0x30>; + ranges; + + muram@80000 { + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x80000 0x10000>; + + data@0 { + compatible = "fsl,cpm-muram-data"; + reg = <0x0 0x2000 0x9000 0x1000>; + }; + }; + + brg@919f0 { + compatible = "fsl,mpc8555-brg", + "fsl,cpm2-brg", + "fsl,cpm-brg"; + reg = <0x919f0 0x10 0x915f0 0x10>; + }; + + cpmpic: pic@90c00 { + interrupt-controller; + #address-cells = <0>; + #interrupt-cells = <2>; + interrupts = <46 2>; + interrupt-parent = <&mpic>; + reg = <0x90c00 0x80>; + compatible = "fsl,mpc8555-cpm-pic", "fsl,cpm2-pic"; + }; + }; + }; + + pci0: pci@e0008000 { + interrupt-map-mask = <0x1f800 0x0 0x0 0x7>; + interrupt-map = < + + /* IDSEL 0x10 */ + 0x8000 0x0 0x0 0x1 &mpic 0x0 0x1 + 0x8000 0x0 0x0 0x2 &mpic 0x1 0x1 + 0x8000 0x0 0x0 0x3 &mpic 0x2 0x1 + 0x8000 0x0 0x0 0x4 &mpic 0x3 0x1 + + /* IDSEL 0x11 */ + 0x8800 0x0 0x0 0x1 &mpic 0x0 0x1 + 0x8800 0x0 0x0 0x2 &mpic 0x1 0x1 + 0x8800 0x0 0x0 0x3 &mpic 0x2 0x1 + 0x8800 0x0 0x0 0x4 &mpic 0x3 0x1 + + /* IDSEL 0x12 (Slot 1) */ + 0x9000 0x0 0x0 0x1 &mpic 0x0 0x1 + 0x9000 0x0 0x0 0x2 &mpic 0x1 0x1 + 0x9000 0x0 0x0 0x3 &mpic 0x2 0x1 + 0x9000 0x0 0x0 0x4 &mpic 0x3 0x1 + + /* IDSEL 0x13 (Slot 2) */ + 0x9800 0x0 0x0 0x1 &mpic 0x1 0x1 + 0x9800 0x0 0x0 0x2 &mpic 0x2 0x1 + 0x9800 0x0 0x0 0x3 &mpic 0x3 0x1 + 0x9800 0x0 0x0 0x4 &mpic 0x0 0x1 + + /* IDSEL 0x14 (Slot 3) */ + 0xa000 0x0 0x0 0x1 &mpic 0x2 0x1 + 0xa000 0x0 0x0 0x2 &mpic 0x3 0x1 + 0xa000 0x0 0x0 0x3 &mpic 0x0 0x1 + 0xa000 0x0 0x0 0x4 &mpic 0x1 0x1 + + /* IDSEL 0x15 (Slot 4) */ + 0xa800 0x0 0x0 0x1 &mpic 0x3 0x1 + 0xa800 0x0 0x0 0x2 &mpic 0x0 0x1 + 0xa800 0x0 0x0 0x3 &mpic 0x1 0x1 + 0xa800 0x0 0x0 0x4 &mpic 0x2 0x1 + + /* Bus 1 (Tundra Bridge) */ + /* IDSEL 0x12 (ISA bridge) */ + 0x19000 0x0 0x0 0x1 &mpic 0x0 0x1 + 0x19000 0x0 0x0 0x2 &mpic 0x1 0x1 + 0x19000 0x0 0x0 0x3 &mpic 0x2 0x1 + 0x19000 0x0 0x0 0x4 &mpic 0x3 0x1>; + interrupt-parent = <&mpic>; + interrupts = <24 2>; + bus-range = <0 0>; + ranges = <0x2000000 0x0 0x80000000 0x80000000 0x0 0x20000000 + 0x1000000 0x0 0x0 0xe2000000 0x0 0x100000>; + clock-frequency = <66666666>; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + reg = <0xe0008000 0x1000>; + compatible = "fsl,mpc8540-pci"; + device_type = "pci"; + + i8259@19000 { + interrupt-controller; + device_type = "interrupt-controller"; + reg = <0x19000 0x0 0x0 0x0 0x1>; + #address-cells = <0>; + #interrupt-cells = <2>; + compatible = "chrp,iic"; + interrupts = <1>; + interrupt-parent = <&pci0>; + }; + }; + + pci1: pci@e0009000 { + interrupt-map-mask = <0xf800 0x0 0x0 0x7>; + interrupt-map = < + + /* IDSEL 0x15 */ + 0xa800 0x0 0x0 0x1 &mpic 0xb 0x1 + 0xa800 0x0 0x0 0x2 &mpic 0xb 0x1 + 0xa800 0x0 0x0 0x3 &mpic 0xb 0x1 + 0xa800 0x0 0x0 0x4 &mpic 0xb 0x1>; + interrupt-parent = <&mpic>; + interrupts = <25 2>; + bus-range = <0 0>; + ranges = <0x2000000 0x0 0xa0000000 0xa0000000 0x0 0x20000000 + 0x1000000 0x0 0x0 0xe3000000 0x0 0x100000>; + clock-frequency = <66666666>; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + reg = <0xe0009000 0x1000>; + compatible = "fsl,mpc8540-pci"; + device_type = "pci"; + }; +}; diff --git a/arch/powerpc/boot/dts/t1040qds.dts b/arch/powerpc/boot/dts/t1040qds.dts new file mode 100644 index 000000000..973c29c2f --- /dev/null +++ b/arch/powerpc/boot/dts/t1040qds.dts @@ -0,0 +1,46 @@ +/* + * T1040QDS Device Tree Source + * + * Copyright 2013 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor "AS IS" AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +/include/ "fsl/t104xsi-pre.dtsi" +/include/ "t104xqds.dtsi" + +/ { + model = "fsl,T1040QDS"; + compatible = "fsl,T1040QDS"; + #address-cells = <2>; + #size-cells = <2>; + interrupt-parent = <&mpic>; +}; + +/include/ "fsl/t1040si-post.dtsi" diff --git a/arch/powerpc/boot/dts/t1040rdb.dts b/arch/powerpc/boot/dts/t1040rdb.dts new file mode 100644 index 000000000..79a0bed04 --- /dev/null +++ b/arch/powerpc/boot/dts/t1040rdb.dts @@ -0,0 +1,48 @@ +/* + * T1040RDB Device Tree Source + * + * Copyright 2014 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor "AS IS" AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +/include/ "fsl/t104xsi-pre.dtsi" +/include/ "t104xrdb.dtsi" + +/ { + model = "fsl,T1040RDB"; + compatible = "fsl,T1040RDB"; + ifc: localbus@ffe124000 { + cpld@3,0 { + compatible = "fsl,t1040rdb-cpld"; + }; + }; +}; + +/include/ "fsl/t1040si-post.dtsi" diff --git a/arch/powerpc/boot/dts/t1042qds.dts b/arch/powerpc/boot/dts/t1042qds.dts new file mode 100644 index 000000000..45bd03752 --- /dev/null +++ b/arch/powerpc/boot/dts/t1042qds.dts @@ -0,0 +1,46 @@ +/* + * T1042QDS Device Tree Source + * + * Copyright 2013 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor "AS IS" AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +/include/ "fsl/t104xsi-pre.dtsi" +/include/ "t104xqds.dtsi" + +/ { + model = "fsl,T1042QDS"; + compatible = "fsl,T1042QDS"; + #address-cells = <2>; + #size-cells = <2>; + interrupt-parent = <&mpic>; +}; + +/include/ "fsl/t1042si-post.dtsi" diff --git a/arch/powerpc/boot/dts/t1042rdb.dts b/arch/powerpc/boot/dts/t1042rdb.dts new file mode 100644 index 000000000..738c23790 --- /dev/null +++ b/arch/powerpc/boot/dts/t1042rdb.dts @@ -0,0 +1,48 @@ +/* + * T1042RDB Device Tree Source + * + * Copyright 2014 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor "AS IS" AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +/include/ "fsl/t104xsi-pre.dtsi" +/include/ "t104xrdb.dtsi" + +/ { + model = "fsl,T1042RDB"; + compatible = "fsl,T1042RDB"; + ifc: localbus@ffe124000 { + cpld@3,0 { + compatible = "fsl,t1042rdb-cpld"; + }; + }; +}; + +/include/ "fsl/t1042si-post.dtsi" diff --git a/arch/powerpc/boot/dts/t1042rdb_pi.dts b/arch/powerpc/boot/dts/t1042rdb_pi.dts new file mode 100644 index 000000000..634f751fa --- /dev/null +++ b/arch/powerpc/boot/dts/t1042rdb_pi.dts @@ -0,0 +1,57 @@ +/* + * T1042RDB_PI Device Tree Source + * + * Copyright 2014 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor "AS IS" AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +/include/ "fsl/t104xsi-pre.dtsi" +/include/ "t104xrdb.dtsi" + +/ { + model = "fsl,T1042RDB_PI"; + compatible = "fsl,T1042RDB_PI"; + ifc: localbus@ffe124000 { + cpld@3,0 { + compatible = "fsl,t1042rdb_pi-cpld"; + }; + }; + soc: soc@ffe000000 { + i2c@118000 { + rtc@68 { + compatible = "dallas,ds1337"; + reg = <0x68>; + interrupts = <0x2 0x1 0 0>; + }; + }; + }; +}; + +/include/ "fsl/t1042si-post.dtsi" diff --git a/arch/powerpc/boot/dts/t104xqds.dtsi b/arch/powerpc/boot/dts/t104xqds.dtsi new file mode 100644 index 000000000..f7e9bfbee --- /dev/null +++ b/arch/powerpc/boot/dts/t104xqds.dtsi @@ -0,0 +1,181 @@ +/* + * T104xQDS Device Tree Source + * + * Copyright 2013 - 2014 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor "AS IS" AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +/ { + model = "fsl,T1040QDS"; + #address-cells = <2>; + #size-cells = <2>; + interrupt-parent = <&mpic>; + + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + bman_fbpr: bman-fbpr { + size = <0 0x1000000>; + alignment = <0 0x1000000>; + }; + }; + + ifc: localbus@ffe124000 { + reg = <0xf 0xfe124000 0 0x2000>; + ranges = <0 0 0xf 0xe8000000 0x08000000 + 2 0 0xf 0xff800000 0x00010000 + 3 0 0xf 0xffdf0000 0x00008000>; + + nor@0,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "cfi-flash"; + reg = <0x0 0x0 0x8000000>; + + bank-width = <2>; + device-width = <1>; + }; + + nand@2,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,ifc-nand"; + reg = <0x2 0x0 0x10000>; + }; + + board-control@3,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,fpga-qixis"; + reg = <3 0 0x300>; + }; + }; + + memory { + device_type = "memory"; + }; + + dcsr: dcsr@f00000000 { + ranges = <0x00000000 0xf 0x00000000 0x01072000>; + }; + + bportals: bman-portals@ff4000000 { + ranges = <0x0 0xf 0xf4000000 0x2000000>; + }; + + soc: soc@ffe000000 { + ranges = <0x00000000 0xf 0xfe000000 0x1000000>; + reg = <0xf 0xfe000000 0 0x00001000>; + + spi@110000 { + flash@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "micron,n25q128a11"; + reg = <0>; + spi-max-frequency = <10000000>; /* input clock */ + }; + }; + + i2c@118000 { + pca9547@77 { + compatible = "philips,pca9547"; + reg = <0x77>; + }; + rtc@68 { + compatible = "dallas,ds3232"; + reg = <0x68>; + interrupts = <0x1 0x1 0 0>; + }; + }; + }; + + pci0: pcie@ffe240000 { + reg = <0xf 0xfe240000 0 0x10000>; + ranges = <0x02000000 0 0xe0000000 0xc 0x00000000 0x0 0x10000000 + 0x01000000 0 0x00000000 0xf 0xf8000000 0x0 0x00010000>; + pcie@0 { + ranges = <0x02000000 0 0xe0000000 + 0x02000000 0 0xe0000000 + 0 0x10000000 + + 0x01000000 0 0x00000000 + 0x01000000 0 0x00000000 + 0 0x00010000>; + }; + }; + + pci1: pcie@ffe250000 { + reg = <0xf 0xfe250000 0 0x10000>; + ranges = <0x02000000 0x0 0xe0000000 0xc 0x10000000 0x0 0x10000000 + 0x01000000 0x0 0x00000000 0xf 0xf8010000 0x0 0x00010000>; + pcie@0 { + ranges = <0x02000000 0 0xe0000000 + 0x02000000 0 0xe0000000 + 0 0x10000000 + + 0x01000000 0 0x00000000 + 0x01000000 0 0x00000000 + 0 0x00010000>; + }; + }; + + pci2: pcie@ffe260000 { + reg = <0xf 0xfe260000 0 0x10000>; + ranges = <0x02000000 0 0xe0000000 0xc 0x20000000 0 0x10000000 + 0x01000000 0 0x00000000 0xf 0xf8020000 0 0x00010000>; + pcie@0 { + ranges = <0x02000000 0 0xe0000000 + 0x02000000 0 0xe0000000 + 0 0x10000000 + + 0x01000000 0 0x00000000 + 0x01000000 0 0x00000000 + 0 0x00010000>; + }; + }; + + pci3: pcie@ffe270000 { + reg = <0xf 0xfe270000 0 0x10000>; + ranges = <0x02000000 0 0xe0000000 0xc 0x30000000 0 0x10000000 + 0x01000000 0 0x00000000 0xf 0xf8030000 0 0x00010000>; + pcie@0 { + ranges = <0x02000000 0 0xe0000000 + 0x02000000 0 0xe0000000 + 0 0x10000000 + + 0x01000000 0 0x00000000 + 0x01000000 0 0x00000000 + 0 0x00010000>; + }; + }; +}; diff --git a/arch/powerpc/boot/dts/t104xrdb.dtsi b/arch/powerpc/boot/dts/t104xrdb.dtsi new file mode 100644 index 000000000..76e07a3f2 --- /dev/null +++ b/arch/powerpc/boot/dts/t104xrdb.dtsi @@ -0,0 +1,177 @@ +/* + * T1040RDB/T1042RDB Device Tree Source + * + * Copyright 2014 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor "AS IS" AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +/ { + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + bman_fbpr: bman-fbpr { + size = <0 0x1000000>; + alignment = <0 0x1000000>; + }; + }; + + ifc: localbus@ffe124000 { + reg = <0xf 0xfe124000 0 0x2000>; + ranges = <0 0 0xf 0xe8000000 0x08000000 + 2 0 0xf 0xff800000 0x00010000 + 3 0 0xf 0xffdf0000 0x00008000>; + + nor@0,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "cfi-flash"; + reg = <0x0 0x0 0x8000000>; + bank-width = <2>; + device-width = <1>; + }; + + nand@2,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,ifc-nand"; + reg = <0x2 0x0 0x10000>; + }; + + cpld@3,0 { + reg = <3 0 0x300>; + }; + }; + + memory { + device_type = "memory"; + }; + + dcsr: dcsr@f00000000 { + ranges = <0x00000000 0xf 0x00000000 0x01072000>; + }; + + bportals: bman-portals@ff4000000 { + ranges = <0x0 0xf 0xf4000000 0x2000000>; + }; + + soc: soc@ffe000000 { + ranges = <0x00000000 0xf 0xfe000000 0x1000000>; + reg = <0xf 0xfe000000 0 0x00001000>; + + spi@110000 { + flash@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "micron,n25q512a"; + reg = <0>; + spi-max-frequency = <10000000>; /* input clock */ + }; + }; + + i2c@118000 { + adt7461@4c { + compatible = "adi,adt7461"; + reg = <0x4c>; + }; + }; + + i2c@118100 { + pca9546@77 { + compatible = "nxp,pca9546"; + reg = <0x77>; + #address-cells = <1>; + #size-cells = <0>; + }; + }; + + }; + + pci0: pcie@ffe240000 { + reg = <0xf 0xfe240000 0 0x10000>; + ranges = <0x02000000 0 0xe0000000 0xc 0x00000000 0x0 0x10000000 + 0x01000000 0 0x00000000 0xf 0xf8000000 0x0 0x00010000>; + pcie@0 { + ranges = <0x02000000 0 0xe0000000 + 0x02000000 0 0xe0000000 + 0 0x10000000 + + 0x01000000 0 0x00000000 + 0x01000000 0 0x00000000 + 0 0x00010000>; + }; + }; + + pci1: pcie@ffe250000 { + reg = <0xf 0xfe250000 0 0x10000>; + ranges = <0x02000000 0x0 0xe0000000 0xc 0x10000000 0x0 0x10000000 + 0x01000000 0x0 0x00000000 0xf 0xf8010000 0x0 0x00010000>; + pcie@0 { + ranges = <0x02000000 0 0xe0000000 + 0x02000000 0 0xe0000000 + 0 0x10000000 + + 0x01000000 0 0x00000000 + 0x01000000 0 0x00000000 + 0 0x00010000>; + }; + }; + + pci2: pcie@ffe260000 { + reg = <0xf 0xfe260000 0 0x10000>; + ranges = <0x02000000 0 0xe0000000 0xc 0x20000000 0 0x10000000 + 0x01000000 0 0x00000000 0xf 0xf8020000 0 0x00010000>; + pcie@0 { + ranges = <0x02000000 0 0xe0000000 + 0x02000000 0 0xe0000000 + 0 0x10000000 + + 0x01000000 0 0x00000000 + 0x01000000 0 0x00000000 + 0 0x00010000>; + }; + }; + + pci3: pcie@ffe270000 { + reg = <0xf 0xfe270000 0 0x10000>; + ranges = <0x02000000 0 0xe0000000 0xc 0x30000000 0 0x10000000 + 0x01000000 0 0x00000000 0xf 0xf8030000 0 0x00010000>; + pcie@0 { + ranges = <0x02000000 0 0xe0000000 + 0x02000000 0 0xe0000000 + 0 0x10000000 + + 0x01000000 0 0x00000000 + 0x01000000 0 0x00000000 + 0 0x00010000>; + }; + }; +}; diff --git a/arch/powerpc/boot/dts/t2080qds.dts b/arch/powerpc/boot/dts/t2080qds.dts new file mode 100644 index 000000000..aa1d6d8c1 --- /dev/null +++ b/arch/powerpc/boot/dts/t2080qds.dts @@ -0,0 +1,57 @@ +/* + * T2080QDS Device Tree Source + * + * Copyright 2013 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor "AS IS" AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +/include/ "fsl/t208xsi-pre.dtsi" +/include/ "t208xqds.dtsi" + +/ { + model = "fsl,T2080QDS"; + compatible = "fsl,T2080QDS"; + #address-cells = <2>; + #size-cells = <2>; + interrupt-parent = <&mpic>; + + rio: rapidio@ffe0c0000 { + reg = <0xf 0xfe0c0000 0 0x11000>; + + port1 { + ranges = <0 0 0xc 0x20000000 0 0x10000000>; + }; + port2 { + ranges = <0 0 0xc 0x30000000 0 0x10000000>; + }; + }; +}; + +/include/ "fsl/t2080si-post.dtsi" diff --git a/arch/powerpc/boot/dts/t2080rdb.dts b/arch/powerpc/boot/dts/t2080rdb.dts new file mode 100644 index 000000000..e88910476 --- /dev/null +++ b/arch/powerpc/boot/dts/t2080rdb.dts @@ -0,0 +1,57 @@ +/* + * T2080PCIe-RDB Board Device Tree Source + * + * Copyright 2014 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor "AS IS" AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +/include/ "fsl/t208xsi-pre.dtsi" +/include/ "t208xrdb.dtsi" + +/ { + model = "fsl,T2080RDB"; + compatible = "fsl,T2080RDB"; + #address-cells = <2>; + #size-cells = <2>; + interrupt-parent = <&mpic>; + + rio: rapidio@ffe0c0000 { + reg = <0xf 0xfe0c0000 0 0x11000>; + + port1 { + ranges = <0 0 0xc 0x20000000 0 0x10000000>; + }; + port2 { + ranges = <0 0 0xc 0x30000000 0 0x10000000>; + }; + }; +}; + +/include/ "fsl/t2080si-post.dtsi" diff --git a/arch/powerpc/boot/dts/t2081qds.dts b/arch/powerpc/boot/dts/t2081qds.dts new file mode 100644 index 000000000..8ec80a71e --- /dev/null +++ b/arch/powerpc/boot/dts/t2081qds.dts @@ -0,0 +1,46 @@ +/* + * T2081QDS Device Tree Source + * + * Copyright 2013 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor "AS IS" AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +/include/ "fsl/t208xsi-pre.dtsi" +/include/ "t208xqds.dtsi" + +/ { + model = "fsl,T2081QDS"; + compatible = "fsl,T2081QDS"; + #address-cells = <2>; + #size-cells = <2>; + interrupt-parent = <&mpic>; +}; + +/include/ "fsl/t2081si-post.dtsi" diff --git a/arch/powerpc/boot/dts/t208xqds.dtsi b/arch/powerpc/boot/dts/t208xqds.dtsi new file mode 100644 index 000000000..c42e07f4f --- /dev/null +++ b/arch/powerpc/boot/dts/t208xqds.dtsi @@ -0,0 +1,265 @@ +/* + * T2080/T2081 QDS Device Tree Source + * + * Copyright 2013 - 2014 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor "AS IS" AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +/ { + model = "fsl,T2080QDS"; + compatible = "fsl,T2080QDS"; + #address-cells = <2>; + #size-cells = <2>; + interrupt-parent = <&mpic>; + + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + bman_fbpr: bman-fbpr { + size = <0 0x1000000>; + alignment = <0 0x1000000>; + }; + }; + + ifc: localbus@ffe124000 { + reg = <0xf 0xfe124000 0 0x2000>; + ranges = <0 0 0xf 0xe8000000 0x08000000 + 2 0 0xf 0xff800000 0x00010000 + 3 0 0xf 0xffdf0000 0x00008000>; + + nor@0,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "cfi-flash"; + reg = <0x0 0x0 0x8000000>; + bank-width = <2>; + device-width = <1>; + }; + + nand@2,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,ifc-nand"; + reg = <0x2 0x0 0x10000>; + }; + + boardctrl: board-control@3,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,fpga-qixis"; + reg = <3 0 0x300>; + ranges = <0 3 0 0x300>; + }; + }; + + memory { + device_type = "memory"; + }; + + dcsr: dcsr@f00000000 { + ranges = <0x00000000 0xf 0x00000000 0x01072000>; + }; + + bportals: bman-portals@ff4000000 { + ranges = <0x0 0xf 0xf4000000 0x2000000>; + }; + + soc: soc@ffe000000 { + ranges = <0x00000000 0xf 0xfe000000 0x1000000>; + reg = <0xf 0xfe000000 0 0x00001000>; + spi@110000 { + flash@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "micron,n25q128a11"; /* 16MB */ + reg = <0>; + spi-max-frequency = <40000000>; /* input clock */ + }; + + flash@1 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "sst,sst25wf040"; + reg = <1>; + spi-max-frequency = <35000000>; + }; + + flash@2 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "eon,en25s64"; + reg = <2>; + spi-max-frequency = <35000000>; + }; + }; + + i2c@118000 { + pca9547@77 { + compatible = "nxp,pca9547"; + reg = <0x77>; + #address-cells = <1>; + #size-cells = <0>; + + i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x0>; + + eeprom@50 { + compatible = "at24,24c512"; + reg = <0x50>; + }; + + eeprom@51 { + compatible = "at24,24c02"; + reg = <0x51>; + }; + + eeprom@57 { + compatible = "at24,24c02"; + reg = <0x57>; + }; + + rtc@68 { + compatible = "dallas,ds3232"; + reg = <0x68>; + interrupts = <0xb 0x1 0 0>; + }; + }; + + i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x1>; + + eeprom@55 { + compatible = "at24,24c02"; + reg = <0x55>; + }; + }; + + i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x2>; + + ina220@40 { + compatible = "ti,ina220"; + reg = <0x40>; + shunt-resistor = <1000>; + }; + + ina220@41 { + compatible = "ti,ina220"; + reg = <0x41>; + shunt-resistor = <1000>; + }; + }; + + i2c@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x3>; + + adt7461@4c { + compatible = "adi,adt7461"; + reg = <0x4c>; + }; + }; + }; + }; + + sdhc@114000 { + voltage-ranges = <1800 1800 3300 3300>; + }; + }; + + pci0: pcie@ffe240000 { + reg = <0xf 0xfe240000 0 0x10000>; + ranges = <0x02000000 0 0xe0000000 0xc 0x00000000 0x0 0x20000000 + 0x01000000 0 0x00000000 0xf 0xf8000000 0x0 0x00010000>; + pcie@0 { + ranges = <0x02000000 0 0xe0000000 + 0x02000000 0 0xe0000000 + 0 0x20000000 + + 0x01000000 0 0x00000000 + 0x01000000 0 0x00000000 + 0 0x00010000>; + }; + }; + + pci1: pcie@ffe250000 { + reg = <0xf 0xfe250000 0 0x10000>; + ranges = <0x02000000 0x0 0xe0000000 0xc 0x20000000 0x0 0x10000000 + 0x01000000 0x0 0x00000000 0xf 0xf8010000 0x0 0x00010000>; + pcie@0 { + ranges = <0x02000000 0 0xe0000000 + 0x02000000 0 0xe0000000 + 0 0x20000000 + + 0x01000000 0 0x00000000 + 0x01000000 0 0x00000000 + 0 0x00010000>; + }; + }; + + pci2: pcie@ffe260000 { + reg = <0xf 0xfe260000 0 0x1000>; + ranges = <0x02000000 0 0xe0000000 0xc 0x30000000 0 0x10000000 + 0x01000000 0 0x00000000 0xf 0xf8020000 0 0x00010000>; + pcie@0 { + ranges = <0x02000000 0 0xe0000000 + 0x02000000 0 0xe0000000 + 0 0x20000000 + + 0x01000000 0 0x00000000 + 0x01000000 0 0x00000000 + 0 0x00010000>; + }; + }; + + pci3: pcie@ffe270000 { + reg = <0xf 0xfe270000 0 0x10000>; + ranges = <0x02000000 0 0xe0000000 0xc 0x40000000 0 0x10000000 + 0x01000000 0 0x00000000 0xf 0xf8030000 0 0x00010000>; + pcie@0 { + ranges = <0x02000000 0 0xe0000000 + 0x02000000 0 0xe0000000 + 0 0x20000000 + + 0x01000000 0 0x00000000 + 0x01000000 0 0x00000000 + 0 0x00010000>; + }; + }; +}; diff --git a/arch/powerpc/boot/dts/t208xrdb.dtsi b/arch/powerpc/boot/dts/t208xrdb.dtsi new file mode 100644 index 000000000..e1463b165 --- /dev/null +++ b/arch/powerpc/boot/dts/t208xrdb.dtsi @@ -0,0 +1,199 @@ +/* + * T2080PCIe-RDB Board Device Tree Source + * + * Copyright 2014 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor "AS IS" AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +/ { + model = "fsl,T2080RDB"; + compatible = "fsl,T2080RDB"; + #address-cells = <2>; + #size-cells = <2>; + interrupt-parent = <&mpic>; + + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + bman_fbpr: bman-fbpr { + size = <0 0x1000000>; + alignment = <0 0x1000000>; + }; + }; + + ifc: localbus@ffe124000 { + reg = <0xf 0xfe124000 0 0x2000>; + ranges = <0 0 0xf 0xe8000000 0x08000000 + 2 0 0xf 0xff800000 0x00010000 + 3 0 0xf 0xffdf0000 0x00008000>; + + nor@0,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "cfi-flash"; + reg = <0x0 0x0 0x8000000>; + + bank-width = <2>; + device-width = <1>; + }; + + nand@1,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,ifc-nand"; + reg = <0x2 0x0 0x10000>; + }; + + boardctrl: board-control@2,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,t2080-cpld"; + reg = <3 0 0x300>; + ranges = <0 3 0 0x300>; + }; + }; + + memory { + device_type = "memory"; + }; + + dcsr: dcsr@f00000000 { + ranges = <0x00000000 0xf 0x00000000 0x01072000>; + }; + + bportals: bman-portals@ff4000000 { + ranges = <0x0 0xf 0xf4000000 0x2000000>; + }; + + soc: soc@ffe000000 { + ranges = <0x00000000 0xf 0xfe000000 0x1000000>; + reg = <0xf 0xfe000000 0 0x00001000>; + spi@110000 { + flash@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "micron,n25q512a"; + reg = <0>; + spi-max-frequency = <10000000>; /* input clock */ + }; + }; + + i2c@118000 { + adt7481@4c { + compatible = "adi,adt7481"; + reg = <0x4c>; + }; + + rtc@68 { + compatible = "dallas,ds1339"; + reg = <0x68>; + interrupts = <0x1 0x1 0 0>; + }; + + eeprom@50 { + compatible = "atmel,24c256"; + reg = <0x50>; + }; + }; + + i2c@118100 { + pca9546@77 { + compatible = "nxp,pca9546"; + reg = <0x77>; + }; + }; + + sdhc@114000 { + voltage-ranges = <1800 1800 3300 3300>; + }; + }; + + pci0: pcie@ffe240000 { + reg = <0xf 0xfe240000 0 0x10000>; + ranges = <0x02000000 0 0xe0000000 0xc 0x00000000 0x0 0x20000000 + 0x01000000 0 0x00000000 0xf 0xf8000000 0x0 0x00010000>; + pcie@0 { + ranges = <0x02000000 0 0xe0000000 + 0x02000000 0 0xe0000000 + 0 0x20000000 + + 0x01000000 0 0x00000000 + 0x01000000 0 0x00000000 + 0 0x00010000>; + }; + }; + + pci1: pcie@ffe250000 { + reg = <0xf 0xfe250000 0 0x10000>; + ranges = <0x02000000 0x0 0xe0000000 0xc 0x20000000 0x0 0x10000000 + 0x01000000 0x0 0x00000000 0xf 0xf8010000 0x0 0x00010000>; + pcie@0 { + ranges = <0x02000000 0 0xe0000000 + 0x02000000 0 0xe0000000 + 0 0x20000000 + + 0x01000000 0 0x00000000 + 0x01000000 0 0x00000000 + 0 0x00010000>; + }; + }; + + pci2: pcie@ffe260000 { + reg = <0xf 0xfe260000 0 0x1000>; + ranges = <0x02000000 0 0xe0000000 0xc 0x30000000 0 0x10000000 + 0x01000000 0 0x00000000 0xf 0xf8020000 0 0x00010000>; + pcie@0 { + ranges = <0x02000000 0 0xe0000000 + 0x02000000 0 0xe0000000 + 0 0x20000000 + + 0x01000000 0 0x00000000 + 0x01000000 0 0x00000000 + 0 0x00010000>; + }; + }; + + pci3: pcie@ffe270000 { + reg = <0xf 0xfe270000 0 0x10000>; + ranges = <0x02000000 0 0xe0000000 0xc 0x40000000 0 0x10000000 + 0x01000000 0 0x00000000 0xf 0xf8030000 0 0x00010000>; + pcie@0 { + ranges = <0x02000000 0 0xe0000000 + 0x02000000 0 0xe0000000 + 0 0x20000000 + + 0x01000000 0 0x00000000 + 0x01000000 0 0x00000000 + 0 0x00010000>; + }; + }; +}; diff --git a/arch/powerpc/boot/dts/t4240qds.dts b/arch/powerpc/boot/dts/t4240qds.dts new file mode 100644 index 000000000..6df777664 --- /dev/null +++ b/arch/powerpc/boot/dts/t4240qds.dts @@ -0,0 +1,298 @@ +/* + * T4240QDS Device Tree Source + * + * Copyright 2012 - 2014 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +/include/ "fsl/t4240si-pre.dtsi" + +/ { + model = "fsl,T4240QDS"; + compatible = "fsl,T4240QDS"; + #address-cells = <2>; + #size-cells = <2>; + interrupt-parent = <&mpic>; + + ifc: localbus@ffe124000 { + reg = <0xf 0xfe124000 0 0x2000>; + ranges = <0 0 0xf 0xe8000000 0x08000000 + 2 0 0xf 0xff800000 0x00010000 + 3 0 0xf 0xffdf0000 0x00008000>; + + nor@0,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "cfi-flash"; + reg = <0x0 0x0 0x8000000>; + + bank-width = <2>; + device-width = <1>; + }; + + nand@2,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,ifc-nand"; + reg = <0x2 0x0 0x10000>; + + partition@0 { + /* This location must not be altered */ + /* 1MB for u-boot Bootloader Image */ + reg = <0x0 0x00100000>; + label = "NAND U-Boot Image"; + read-only; + }; + + partition@100000 { + /* 1MB for DTB Image */ + reg = <0x00100000 0x00100000>; + label = "NAND DTB Image"; + }; + + partition@200000 { + /* 10MB for Linux Kernel Image */ + reg = <0x00200000 0x00A00000>; + label = "NAND Linux Kernel Image"; + }; + + partition@C00000 { + /* 500MB for Root file System Image */ + reg = <0x00c00000 0x1F400000>; + label = "NAND RFS Image"; + }; + }; + + board-control@3,0 { + compatible = "fsl,t4240qds-fpga", "fsl,fpga-qixis"; + reg = <3 0 0x300>; + }; + }; + + memory { + device_type = "memory"; + }; + + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + bman_fbpr: bman-fbpr { + size = <0 0x1000000>; + alignment = <0 0x1000000>; + }; + }; + + dcsr: dcsr@f00000000 { + ranges = <0x00000000 0xf 0x00000000 0x01072000>; + }; + + bportals: bman-portals@ff4000000 { + ranges = <0x0 0xf 0xf4000000 0x2000000>; + }; + + soc: soc@ffe000000 { + ranges = <0x00000000 0xf 0xfe000000 0x1000000>; + reg = <0xf 0xfe000000 0 0x00001000>; + spi@110000 { + flash@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "sst,sst25wf040"; + reg = <0>; + spi-max-frequency = <40000000>; /* input clock */ + }; + }; + + i2c@118000 { + mux@77 { + compatible = "nxp,pca9547"; + reg = <0x77>; + #address-cells = <1>; + #size-cells = <0>; + + i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + + eeprom@51 { + compatible = "at24,24c256"; + reg = <0x51>; + }; + eeprom@52 { + compatible = "at24,24c256"; + reg = <0x52>; + }; + eeprom@53 { + compatible = "at24,24c256"; + reg = <0x53>; + }; + eeprom@54 { + compatible = "at24,24c256"; + reg = <0x54>; + }; + eeprom@55 { + compatible = "at24,24c256"; + reg = <0x55>; + }; + eeprom@56 { + compatible = "at24,24c256"; + reg = <0x56>; + }; + rtc@68 { + compatible = "dallas,ds3232"; + reg = <0x68>; + interrupts = <0x1 0x1 0 0>; + }; + }; + + i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x2>; + + ina220@40 { + compatible = "ti,ina220"; + reg = <0x40>; + shunt-resistor = <1000>; + }; + + ina220@41 { + compatible = "ti,ina220"; + reg = <0x41>; + shunt-resistor = <1000>; + }; + + ina220@44 { + compatible = "ti,ina220"; + reg = <0x44>; + shunt-resistor = <1000>; + }; + + ina220@45 { + compatible = "ti,ina220"; + reg = <0x45>; + shunt-resistor = <1000>; + }; + + ina220@46 { + compatible = "ti,ina220"; + reg = <0x46>; + shunt-resistor = <1000>; + }; + + ina220@47 { + compatible = "ti,ina220"; + reg = <0x47>; + shunt-resistor = <1000>; + }; + }; + }; + }; + + sdhc@114000 { + voltage-ranges = <1800 1800 3300 3300>; + }; + }; + + pci0: pcie@ffe240000 { + reg = <0xf 0xfe240000 0 0x10000>; + ranges = <0x02000000 0 0xe0000000 0xc 0x00000000 0x0 0x20000000 + 0x01000000 0 0x00000000 0xf 0xf8000000 0x0 0x00010000>; + pcie@0 { + ranges = <0x02000000 0 0xe0000000 + 0x02000000 0 0xe0000000 + 0 0x20000000 + + 0x01000000 0 0x00000000 + 0x01000000 0 0x00000000 + 0 0x00010000>; + }; + }; + + pci1: pcie@ffe250000 { + reg = <0xf 0xfe250000 0 0x10000>; + ranges = <0x02000000 0x0 0xe0000000 0xc 0x20000000 0x0 0x20000000 + 0x01000000 0x0 0x00000000 0xf 0xf8010000 0x0 0x00010000>; + pcie@0 { + ranges = <0x02000000 0 0xe0000000 + 0x02000000 0 0xe0000000 + 0 0x20000000 + + 0x01000000 0 0x00000000 + 0x01000000 0 0x00000000 + 0 0x00010000>; + }; + }; + + pci2: pcie@ffe260000 { + reg = <0xf 0xfe260000 0 0x1000>; + ranges = <0x02000000 0 0xe0000000 0xc 0x40000000 0 0x20000000 + 0x01000000 0 0x00000000 0xf 0xf8020000 0 0x00010000>; + pcie@0 { + ranges = <0x02000000 0 0xe0000000 + 0x02000000 0 0xe0000000 + 0 0x20000000 + + 0x01000000 0 0x00000000 + 0x01000000 0 0x00000000 + 0 0x00010000>; + }; + }; + + pci3: pcie@ffe270000 { + reg = <0xf 0xfe270000 0 0x10000>; + ranges = <0x02000000 0 0xe0000000 0xc 0x60000000 0 0x20000000 + 0x01000000 0 0x00000000 0xf 0xf8030000 0 0x00010000>; + pcie@0 { + ranges = <0x02000000 0 0xe0000000 + 0x02000000 0 0xe0000000 + 0 0x20000000 + + 0x01000000 0 0x00000000 + 0x01000000 0 0x00000000 + 0 0x00010000>; + }; + }; + rio: rapidio@ffe0c0000 { + reg = <0xf 0xfe0c0000 0 0x11000>; + + port1 { + ranges = <0 0 0xc 0x20000000 0 0x10000000>; + }; + port2 { + ranges = <0 0 0xc 0x30000000 0 0x10000000>; + }; + }; +}; + +/include/ "fsl/t4240si-post.dtsi" diff --git a/arch/powerpc/boot/dts/t4240rdb.dts b/arch/powerpc/boot/dts/t4240rdb.dts new file mode 100644 index 000000000..46049cf37 --- /dev/null +++ b/arch/powerpc/boot/dts/t4240rdb.dts @@ -0,0 +1,201 @@ +/* + * T4240RDB Device Tree Source + * + * Copyright 2014 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor "AS IS" AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +/include/ "fsl/t4240si-pre.dtsi" + +/ { + model = "fsl,T4240RDB"; + compatible = "fsl,T4240RDB"; + #address-cells = <2>; + #size-cells = <2>; + interrupt-parent = <&mpic>; + + ifc: localbus@ffe124000 { + reg = <0xf 0xfe124000 0 0x2000>; + ranges = <0 0 0xf 0xe8000000 0x08000000 + 2 0 0xf 0xff800000 0x00010000 + 3 0 0xf 0xffdf0000 0x00008000>; + + nor@0,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "cfi-flash"; + reg = <0x0 0x0 0x8000000>; + + bank-width = <2>; + device-width = <1>; + }; + + nand@2,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,ifc-nand"; + reg = <0x2 0x0 0x10000>; + }; + }; + + memory { + device_type = "memory"; + }; + + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + bman_fbpr: bman-fbpr { + size = <0 0x1000000>; + alignment = <0 0x1000000>; + }; + }; + + dcsr: dcsr@f00000000 { + ranges = <0x00000000 0xf 0x00000000 0x01072000>; + }; + + bportals: bman-portals@ff4000000 { + ranges = <0x0 0xf 0xf4000000 0x2000000>; + }; + + soc: soc@ffe000000 { + ranges = <0x00000000 0xf 0xfe000000 0x1000000>; + reg = <0xf 0xfe000000 0 0x00001000>; + spi@110000 { + flash@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "sst,sst25wf040"; + reg = <0>; + spi-max-frequency = <40000000>; /* input clock */ + }; + }; + + i2c@118000 { + eeprom@52 { + compatible = "at24,24c256"; + reg = <0x52>; + }; + eeprom@54 { + compatible = "at24,24c256"; + reg = <0x54>; + }; + eeprom@56 { + compatible = "at24,24c256"; + reg = <0x56>; + }; + rtc@68 { + compatible = "dallas,ds1374"; + reg = <0x68>; + interrupts = <0x1 0x1 0 0>; + }; + }; + + sdhc@114000 { + voltage-ranges = <1800 1800 3300 3300>; + }; + }; + + pci0: pcie@ffe240000 { + reg = <0xf 0xfe240000 0 0x10000>; + ranges = <0x02000000 0 0xe0000000 0xc 0x00000000 0x0 0x20000000 + 0x01000000 0 0x00000000 0xf 0xf8000000 0x0 0x00010000>; + pcie@0 { + ranges = <0x02000000 0 0xe0000000 + 0x02000000 0 0xe0000000 + 0 0x20000000 + + 0x01000000 0 0x00000000 + 0x01000000 0 0x00000000 + 0 0x00010000>; + }; + }; + + pci1: pcie@ffe250000 { + reg = <0xf 0xfe250000 0 0x10000>; + ranges = <0x02000000 0x0 0xe0000000 0xc 0x20000000 0x0 0x20000000 + 0x01000000 0x0 0x00000000 0xf 0xf8010000 0x0 0x00010000>; + pcie@0 { + ranges = <0x02000000 0 0xe0000000 + 0x02000000 0 0xe0000000 + 0 0x20000000 + + 0x01000000 0 0x00000000 + 0x01000000 0 0x00000000 + 0 0x00010000>; + }; + }; + + pci2: pcie@ffe260000 { + reg = <0xf 0xfe260000 0 0x1000>; + ranges = <0x02000000 0 0xe0000000 0xc 0x40000000 0 0x20000000 + 0x01000000 0 0x00000000 0xf 0xf8020000 0 0x00010000>; + pcie@0 { + ranges = <0x02000000 0 0xe0000000 + 0x02000000 0 0xe0000000 + 0 0x20000000 + + 0x01000000 0 0x00000000 + 0x01000000 0 0x00000000 + 0 0x00010000>; + }; + }; + + pci3: pcie@ffe270000 { + reg = <0xf 0xfe270000 0 0x10000>; + ranges = <0x02000000 0 0xe0000000 0xc 0x60000000 0 0x20000000 + 0x01000000 0 0x00000000 0xf 0xf8030000 0 0x00010000>; + pcie@0 { + ranges = <0x02000000 0 0xe0000000 + 0x02000000 0 0xe0000000 + 0 0x20000000 + + 0x01000000 0 0x00000000 + 0x01000000 0 0x00000000 + 0 0x00010000>; + }; + }; + + rio: rapidio@ffe0c0000 { + reg = <0xf 0xfe0c0000 0 0x11000>; + + port1 { + ranges = <0 0 0xc 0x20000000 0 0x10000000>; + }; + port2 { + ranges = <0 0 0xc 0x30000000 0 0x10000000>; + }; + }; +}; + +/include/ "fsl/t4240si-post.dtsi" diff --git a/arch/powerpc/boot/dts/taishan.dts b/arch/powerpc/boot/dts/taishan.dts new file mode 100644 index 000000000..1657ad0bf --- /dev/null +++ b/arch/powerpc/boot/dts/taishan.dts @@ -0,0 +1,427 @@ +/* + * Device Tree Source for IBM/AMCC Taishan + * + * Copyright 2007 IBM Corp. + * Hugh Blemings <hugh@au.ibm.com> based off code by + * Josh Boyer <jwboyer@linux.vnet.ibm.com>, David Gibson <dwg@au1.ibm.com> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without + * any warranty of any kind, whether express or implied. + */ + +/dts-v1/; + +/ { + #address-cells = <2>; + #size-cells = <1>; + model = "amcc,taishan"; + compatible = "amcc,taishan"; + dcr-parent = <&{/cpus/cpu@0}>; + + aliases { + ethernet0 = &EMAC2; + ethernet1 = &EMAC3; + serial0 = &UART0; + serial1 = &UART1; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu@0 { + device_type = "cpu"; + model = "PowerPC,440GX"; + reg = <0x00000000>; + clock-frequency = <800000000>; // 800MHz + timebase-frequency = <0>; // Filled in by zImage + i-cache-line-size = <50>; + d-cache-line-size = <50>; + i-cache-size = <32768>; /* 32 kB */ + d-cache-size = <32768>; /* 32 kB */ + dcr-controller; + dcr-access-method = "native"; + }; + }; + + memory { + device_type = "memory"; + reg = <0x00000000 0x00000000 0x00000000>; // Filled in by zImage + }; + + + UICB0: interrupt-controller-base { + compatible = "ibm,uic-440gx", "ibm,uic"; + interrupt-controller; + cell-index = <3>; + dcr-reg = <0x200 0x009>; + #address-cells = <0>; + #size-cells = <0>; + #interrupt-cells = <2>; + }; + + + UIC0: interrupt-controller0 { + compatible = "ibm,uic-440gx", "ibm,uic"; + interrupt-controller; + cell-index = <0>; + dcr-reg = <0x0c0 0x009>; + #address-cells = <0>; + #size-cells = <0>; + #interrupt-cells = <2>; + interrupts = <0x1 0x4 0x0 0x4>; /* cascade - first non-critical */ + interrupt-parent = <&UICB0>; + + }; + + UIC1: interrupt-controller1 { + compatible = "ibm,uic-440gx", "ibm,uic"; + interrupt-controller; + cell-index = <1>; + dcr-reg = <0x0d0 0x009>; + #address-cells = <0>; + #size-cells = <0>; + #interrupt-cells = <2>; + interrupts = <0x3 0x4 0x2 0x4>; /* cascade */ + interrupt-parent = <&UICB0>; + }; + + UIC2: interrupt-controller2 { + compatible = "ibm,uic-440gx", "ibm,uic"; + interrupt-controller; + cell-index = <2>; /* was 1 */ + dcr-reg = <0x210 0x009>; + #address-cells = <0>; + #size-cells = <0>; + #interrupt-cells = <2>; + interrupts = <0x5 0x4 0x4 0x4>; /* cascade */ + interrupt-parent = <&UICB0>; + }; + + + CPC0: cpc { + compatible = "ibm,cpc-440gp"; + dcr-reg = <0x0b0 0x003 0x0e0 0x010>; + // FIXME: anything else? + }; + + L2C0: l2c { + compatible = "ibm,l2-cache-440gx", "ibm,l2-cache"; + dcr-reg = <0x020 0x008 /* Internal SRAM DCR's */ + 0x030 0x008>; /* L2 cache DCR's */ + cache-line-size = <32>; /* 32 bytes */ + cache-size = <262144>; /* L2, 256K */ + interrupt-parent = <&UIC2>; + interrupts = <0x17 0x1>; + }; + + plb { + compatible = "ibm,plb-440gx", "ibm,plb4"; + #address-cells = <2>; + #size-cells = <1>; + ranges; + clock-frequency = <160000000>; // 160MHz + + SDRAM0: memory-controller { + compatible = "ibm,sdram-440gp"; + dcr-reg = <0x010 0x002>; + // FIXME: anything else? + }; + + SRAM0: sram { + compatible = "ibm,sram-440gp"; + dcr-reg = <0x020 0x008 0x00a 0x001>; + }; + + DMA0: dma { + // FIXME: ??? + compatible = "ibm,dma-440gp"; + dcr-reg = <0x100 0x027>; + }; + + MAL0: mcmal { + compatible = "ibm,mcmal-440gx", "ibm,mcmal2"; + dcr-reg = <0x180 0x062>; + num-tx-chans = <4>; + num-rx-chans = <4>; + interrupt-parent = <&MAL0>; + interrupts = <0x0 0x1 0x2 0x3 0x4>; + #interrupt-cells = <1>; + #address-cells = <0>; + #size-cells = <0>; + interrupt-map = </*TXEOB*/ 0x0 &UIC0 0xa 0x4 + /*RXEOB*/ 0x1 &UIC0 0xb 0x4 + /*SERR*/ 0x2 &UIC1 0x0 0x4 + /*TXDE*/ 0x3 &UIC1 0x1 0x4 + /*RXDE*/ 0x4 &UIC1 0x2 0x4>; + interrupt-map-mask = <0xffffffff>; + }; + + POB0: opb { + compatible = "ibm,opb-440gx", "ibm,opb"; + #address-cells = <1>; + #size-cells = <1>; + /* Wish there was a nicer way of specifying a full 32-bit + range */ + ranges = <0x00000000 0x00000001 0x00000000 0x80000000 + 0x80000000 0x00000001 0x80000000 0x80000000>; + dcr-reg = <0x090 0x00b>; + interrupt-parent = <&UIC1>; + interrupts = <0x7 0x4>; + clock-frequency = <80000000>; // 80MHz + + + EBC0: ebc { + compatible = "ibm,ebc-440gx", "ibm,ebc"; + dcr-reg = <0x012 0x002>; + #address-cells = <2>; + #size-cells = <1>; + clock-frequency = <80000000>; // 80MHz + + /* ranges property is supplied by zImage + * based on firmware's configuration of the + * EBC bridge */ + + interrupts = <0x5 0x4>; + interrupt-parent = <&UIC1>; + + nor_flash@0,0 { + compatible = "cfi-flash"; + bank-width = <4>; + device-width = <2>; + reg = <0x0 0x0 0x4000000>; + #address-cells = <1>; + #size-cells = <1>; + partition@0 { + label = "kernel"; + reg = <0x0 0x180000>; + }; + partition@180000 { + label = "root"; + reg = <0x180000 0x200000>; + }; + partition@380000 { + label = "user"; + reg = <0x380000 0x3bc0000>; + }; + partition@3f40000 { + label = "env"; + reg = <0x3f40000 0x80000>; + }; + partition@3fc0000 { + label = "u-boot"; + reg = <0x3fc0000 0x40000>; + }; + }; + }; + + + + UART0: serial@40000200 { + device_type = "serial"; + compatible = "ns16550"; + reg = <0x40000200 0x00000008>; + virtual-reg = <0xe0000200>; + clock-frequency = <11059200>; + current-speed = <115200>; /* 115200 */ + interrupt-parent = <&UIC0>; + interrupts = <0x0 0x4>; + }; + + UART1: serial@40000300 { + device_type = "serial"; + compatible = "ns16550"; + reg = <0x40000300 0x00000008>; + virtual-reg = <0xe0000300>; + clock-frequency = <11059200>; + current-speed = <115200>; /* 115200 */ + interrupt-parent = <&UIC0>; + interrupts = <0x1 0x4>; + }; + + IIC0: i2c@40000400 { + /* FIXME */ + compatible = "ibm,iic-440gp", "ibm,iic"; + reg = <0x40000400 0x00000014>; + interrupt-parent = <&UIC0>; + interrupts = <0x2 0x4>; + }; + IIC1: i2c@40000500 { + /* FIXME */ + compatible = "ibm,iic-440gp", "ibm,iic"; + reg = <0x40000500 0x00000014>; + interrupt-parent = <&UIC0>; + interrupts = <0x3 0x4>; + }; + + GPIO0: gpio@40000700 { + /* FIXME */ + compatible = "ibm,gpio-440gp"; + reg = <0x40000700 0x00000020>; + }; + + ZMII0: emac-zmii@40000780 { + compatible = "ibm,zmii-440gx", "ibm,zmii"; + reg = <0x40000780 0x0000000c>; + }; + + RGMII0: emac-rgmii@40000790 { + compatible = "ibm,rgmii"; + reg = <0x40000790 0x00000008>; + }; + + TAH0: emac-tah@40000b50 { + compatible = "ibm,tah-440gx", "ibm,tah"; + reg = <0x40000b50 0x00000030>; + }; + + TAH1: emac-tah@40000d50 { + compatible = "ibm,tah-440gx", "ibm,tah"; + reg = <0x40000d50 0x00000030>; + }; + + EMAC0: ethernet@40000800 { + unused = <0x1>; + device_type = "network"; + compatible = "ibm,emac-440gx", "ibm,emac4"; + interrupt-parent = <&UIC1>; + interrupts = <0x1c 0x4 0x1d 0x4>; + reg = <0x40000800 0x00000074>; + local-mac-address = [000000000000]; // Filled in by zImage + mal-device = <&MAL0>; + mal-tx-channel = <0>; + mal-rx-channel = <0>; + cell-index = <0>; + max-frame-size = <1500>; + rx-fifo-size = <4096>; + tx-fifo-size = <2048>; + phy-mode = "rmii"; + phy-map = <0x00000001>; + zmii-device = <&ZMII0>; + zmii-channel = <0>; + }; + EMAC1: ethernet@40000900 { + unused = <0x1>; + device_type = "network"; + compatible = "ibm,emac-440gx", "ibm,emac4"; + interrupt-parent = <&UIC1>; + interrupts = <0x1e 0x4 0x1f 0x4>; + reg = <0x40000900 0x00000074>; + local-mac-address = [000000000000]; // Filled in by zImage + mal-device = <&MAL0>; + mal-tx-channel = <1>; + mal-rx-channel = <1>; + cell-index = <1>; + max-frame-size = <1500>; + rx-fifo-size = <4096>; + tx-fifo-size = <2048>; + phy-mode = "rmii"; + phy-map = <0x00000001>; + zmii-device = <&ZMII0>; + zmii-channel = <1>; + }; + + EMAC2: ethernet@40000c00 { + device_type = "network"; + compatible = "ibm,emac-440gx", "ibm,emac4"; + interrupt-parent = <&UIC2>; + interrupts = <0x0 0x4 0x1 0x4>; + reg = <0x40000c00 0x00000074>; + local-mac-address = [000000000000]; // Filled in by zImage + mal-device = <&MAL0>; + mal-tx-channel = <2>; + mal-rx-channel = <2>; + cell-index = <2>; + max-frame-size = <9000>; + rx-fifo-size = <4096>; + tx-fifo-size = <2048>; + phy-mode = "rgmii"; + phy-address = <1>; + rgmii-device = <&RGMII0>; + rgmii-channel = <0>; + zmii-device = <&ZMII0>; + zmii-channel = <2>; + tah-device = <&TAH0>; + tah-channel = <0>; + }; + + EMAC3: ethernet@40000e00 { + device_type = "network"; + compatible = "ibm,emac-440gx", "ibm,emac4"; + interrupt-parent = <&UIC2>; + interrupts = <0x2 0x4 0x3 0x4>; + reg = <0x40000e00 0x00000074>; + local-mac-address = [000000000000]; // Filled in by zImage + mal-device = <&MAL0>; + mal-tx-channel = <3>; + mal-rx-channel = <3>; + cell-index = <3>; + max-frame-size = <9000>; + rx-fifo-size = <4096>; + tx-fifo-size = <2048>; + phy-mode = "rgmii"; + phy-address = <3>; + rgmii-device = <&RGMII0>; + rgmii-channel = <1>; + zmii-device = <&ZMII0>; + zmii-channel = <3>; + tah-device = <&TAH1>; + tah-channel = <0>; + }; + + + GPT0: gpt@40000a00 { + /* FIXME */ + reg = <0x40000a00 0x000000d4>; + interrupt-parent = <&UIC0>; + interrupts = <0x12 0x4 0x13 0x4 0x14 0x4 0x15 0x4 0x16 0x4>; + }; + + }; + + PCIX0: pci@20ec00000 { + device_type = "pci"; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + compatible = "ibm,plb440gp-pcix", "ibm,plb-pcix"; + primary; + large-inbound-windows; + enable-msi-hole; + reg = <0x00000002 0x0ec00000 0x00000008 /* Config space access */ + 0x00000000 0x00000000 0x00000000 /* no IACK cycles */ + 0x00000002 0x0ed00000 0x00000004 /* Special cycles */ + 0x00000002 0x0ec80000 0x00000100 /* Internal registers */ + 0x00000002 0x0ec80100 0x000000fc>; /* Internal messaging registers */ + + /* Outbound ranges, one memory and one IO, + * later cannot be changed + */ + ranges = <0x02000000 0x00000000 0x80000000 0x00000003 0x80000000 0x00000000 0x80000000 + 0x01000000 0x00000000 0x00000000 0x00000002 0x08000000 0x00000000 0x00010000>; + + /* Inbound 2GB range starting at 0 */ + dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x0 0x80000000>; + + interrupt-map-mask = <0xf800 0x0 0x0 0x7>; + interrupt-map = < + /* IDSEL 1 */ + 0x800 0x0 0x0 0x1 &UIC0 0x17 0x8 + 0x800 0x0 0x0 0x2 &UIC0 0x18 0x8 + 0x800 0x0 0x0 0x3 &UIC0 0x19 0x8 + 0x800 0x0 0x0 0x4 &UIC0 0x1a 0x8 + + /* IDSEL 2 */ + 0x1000 0x0 0x0 0x1 &UIC0 0x18 0x8 + 0x1000 0x0 0x0 0x2 &UIC0 0x19 0x8 + 0x1000 0x0 0x0 0x3 &UIC0 0x1a 0x8 + 0x1000 0x0 0x0 0x4 &UIC0 0x17 0x8 + >; + }; + }; + + chosen { + linux,stdout-path = "/plb/opb/serial@40000300"; + }; +}; diff --git a/arch/powerpc/boot/dts/tqm5200.dts b/arch/powerpc/boot/dts/tqm5200.dts new file mode 100644 index 000000000..1db07f6cf --- /dev/null +++ b/arch/powerpc/boot/dts/tqm5200.dts @@ -0,0 +1,211 @@ +/* + * TQM5200 board Device Tree Source + * + * Copyright (C) 2007 Semihalf + * Marian Balakowicz <m8@semihalf.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +/dts-v1/; + +/ { + model = "tqc,tqm5200"; + compatible = "tqc,tqm5200"; + #address-cells = <1>; + #size-cells = <1>; + interrupt-parent = <&mpc5200_pic>; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + PowerPC,5200@0 { + device_type = "cpu"; + reg = <0>; + d-cache-line-size = <32>; + i-cache-line-size = <32>; + d-cache-size = <0x4000>; // L1, 16K + i-cache-size = <0x4000>; // L1, 16K + timebase-frequency = <0>; // from bootloader + bus-frequency = <0>; // from bootloader + clock-frequency = <0>; // from bootloader + }; + }; + + memory { + device_type = "memory"; + reg = <0x00000000 0x04000000>; // 64MB + }; + + soc5200@f0000000 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,mpc5200-immr"; + ranges = <0 0xf0000000 0x0000c000>; + reg = <0xf0000000 0x00000100>; + bus-frequency = <0>; // from bootloader + system-frequency = <0>; // from bootloader + + cdm@200 { + compatible = "fsl,mpc5200-cdm"; + reg = <0x200 0x38>; + }; + + mpc5200_pic: interrupt-controller@500 { + // 5200 interrupts are encoded into two levels; + interrupt-controller; + #interrupt-cells = <3>; + compatible = "fsl,mpc5200-pic"; + reg = <0x500 0x80>; + }; + + timer@600 { // General Purpose Timer + compatible = "fsl,mpc5200-gpt"; + reg = <0x600 0x10>; + interrupts = <1 9 0>; + fsl,has-wdt; + }; + + can@900 { + compatible = "fsl,mpc5200-mscan"; + interrupts = <2 17 0>; + reg = <0x900 0x80>; + }; + + can@980 { + compatible = "fsl,mpc5200-mscan"; + interrupts = <2 18 0>; + reg = <0x980 0x80>; + }; + + gpio_simple: gpio@b00 { + compatible = "fsl,mpc5200-gpio"; + reg = <0xb00 0x40>; + interrupts = <1 7 0>; + gpio-controller; + #gpio-cells = <2>; + }; + + usb@1000 { + compatible = "fsl,mpc5200-ohci","ohci-be"; + reg = <0x1000 0xff>; + interrupts = <2 6 0>; + }; + + dma-controller@1200 { + compatible = "fsl,mpc5200-bestcomm"; + reg = <0x1200 0x80>; + interrupts = <3 0 0 3 1 0 3 2 0 3 3 0 + 3 4 0 3 5 0 3 6 0 3 7 0 + 3 8 0 3 9 0 3 10 0 3 11 0 + 3 12 0 3 13 0 3 14 0 3 15 0>; + }; + + xlb@1f00 { + compatible = "fsl,mpc5200-xlb"; + reg = <0x1f00 0x100>; + }; + + serial@2000 { // PSC1 + compatible = "fsl,mpc5200-psc-uart"; + reg = <0x2000 0x100>; + interrupts = <2 1 0>; + }; + + serial@2200 { // PSC2 + compatible = "fsl,mpc5200-psc-uart"; + reg = <0x2200 0x100>; + interrupts = <2 2 0>; + }; + + serial@2400 { // PSC3 + compatible = "fsl,mpc5200-psc-uart"; + reg = <0x2400 0x100>; + interrupts = <2 3 0>; + }; + + ethernet@3000 { + compatible = "fsl,mpc5200-fec"; + reg = <0x3000 0x400>; + local-mac-address = [ 00 00 00 00 00 00 ]; + interrupts = <2 5 0>; + phy-handle = <&phy0>; + }; + + mdio@3000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,mpc5200-mdio"; + reg = <0x3000 0x400>; // fec range, since we need to setup fec interrupts + interrupts = <2 5 0>; // these are for "mii command finished", not link changes & co. + + phy0: ethernet-phy@0 { + reg = <0>; + }; + }; + + ata@3a00 { + compatible = "fsl,mpc5200-ata"; + reg = <0x3a00 0x100>; + interrupts = <2 7 0>; + }; + + i2c@3d40 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,mpc5200-i2c","fsl-i2c"; + reg = <0x3d40 0x40>; + interrupts = <2 16 0>; + + rtc@68 { + compatible = "dallas,ds1307"; + reg = <0x68>; + }; + }; + + sram@8000 { + compatible = "fsl,mpc5200-sram"; + reg = <0x8000 0x4000>; + }; + }; + + localbus { + compatible = "fsl,mpc5200-lpb","simple-bus"; + #address-cells = <2>; + #size-cells = <1>; + ranges = <0 0 0xfc000000 0x02000000>; + + flash@0,0 { + compatible = "cfi-flash"; + reg = <0 0 0x02000000>; + bank-width = <4>; + device-width = <2>; + #size-cells = <1>; + #address-cells = <1>; + }; + }; + + pci@f0000d00 { + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + device_type = "pci"; + compatible = "fsl,mpc5200-pci"; + reg = <0xf0000d00 0x100>; + interrupt-map-mask = <0xf800 0 0 7>; + interrupt-map = <0xc000 0 0 1 &mpc5200_pic 0 0 3 + 0xc000 0 0 2 &mpc5200_pic 0 0 3 + 0xc000 0 0 3 &mpc5200_pic 0 0 3 + 0xc000 0 0 4 &mpc5200_pic 0 0 3>; + clock-frequency = <0>; // From boot loader + interrupts = <2 8 0 2 9 0 2 10 0>; + bus-range = <0 0>; + ranges = <0x42000000 0 0x80000000 0x80000000 0 0x10000000 + 0x02000000 0 0x90000000 0x90000000 0 0x10000000 + 0x01000000 0 0x00000000 0xa0000000 0 0x01000000>; + }; +}; diff --git a/arch/powerpc/boot/dts/tqm8540.dts b/arch/powerpc/boot/dts/tqm8540.dts new file mode 100644 index 000000000..91cbd7acd --- /dev/null +++ b/arch/powerpc/boot/dts/tqm8540.dts @@ -0,0 +1,346 @@ +/* + * TQM 8540 Device Tree Source + * + * Copyright 2008 Freescale Semiconductor Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +/dts-v1/; + +/ { + model = "tqc,tqm8540"; + compatible = "tqc,tqm8540"; + #address-cells = <1>; + #size-cells = <1>; + + aliases { + ethernet0 = &enet0; + ethernet1 = &enet1; + ethernet2 = &enet2; + serial0 = &serial0; + serial1 = &serial1; + pci0 = &pci0; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + PowerPC,8540@0 { + device_type = "cpu"; + reg = <0>; + d-cache-line-size = <32>; + i-cache-line-size = <32>; + d-cache-size = <32768>; + i-cache-size = <32768>; + timebase-frequency = <0>; + bus-frequency = <0>; + clock-frequency = <0>; + next-level-cache = <&L2>; + }; + }; + + memory { + device_type = "memory"; + reg = <0x00000000 0x10000000>; + }; + + soc@e0000000 { + #address-cells = <1>; + #size-cells = <1>; + device_type = "soc"; + ranges = <0x0 0xe0000000 0x100000>; + bus-frequency = <0>; + compatible = "fsl,mpc8540-immr", "simple-bus"; + + ecm-law@0 { + compatible = "fsl,ecm-law"; + reg = <0x0 0x1000>; + fsl,num-laws = <8>; + }; + + ecm@1000 { + compatible = "fsl,mpc8540-ecm", "fsl,ecm"; + reg = <0x1000 0x1000>; + interrupts = <17 2>; + interrupt-parent = <&mpic>; + }; + + memory-controller@2000 { + compatible = "fsl,mpc8540-memory-controller"; + reg = <0x2000 0x1000>; + interrupt-parent = <&mpic>; + interrupts = <18 2>; + }; + + L2: l2-cache-controller@20000 { + compatible = "fsl,mpc8540-l2-cache-controller"; + reg = <0x20000 0x1000>; + cache-line-size = <32>; + cache-size = <0x40000>; // L2, 256K + interrupt-parent = <&mpic>; + interrupts = <16 2>; + }; + + i2c@3000 { + #address-cells = <1>; + #size-cells = <0>; + cell-index = <0>; + compatible = "fsl-i2c"; + reg = <0x3000 0x100>; + interrupts = <43 2>; + interrupt-parent = <&mpic>; + dfsrr; + + dtt@48 { + compatible = "national,lm75"; + reg = <0x48>; + }; + + rtc@68 { + compatible = "dallas,ds1337"; + reg = <0x68>; + }; + }; + + dma@21300 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,mpc8540-dma", "fsl,eloplus-dma"; + reg = <0x21300 0x4>; + ranges = <0x0 0x21100 0x200>; + cell-index = <0>; + dma-channel@0 { + compatible = "fsl,mpc8540-dma-channel", + "fsl,eloplus-dma-channel"; + reg = <0x0 0x80>; + cell-index = <0>; + interrupt-parent = <&mpic>; + interrupts = <20 2>; + }; + dma-channel@80 { + compatible = "fsl,mpc8540-dma-channel", + "fsl,eloplus-dma-channel"; + reg = <0x80 0x80>; + cell-index = <1>; + interrupt-parent = <&mpic>; + interrupts = <21 2>; + }; + dma-channel@100 { + compatible = "fsl,mpc8540-dma-channel", + "fsl,eloplus-dma-channel"; + reg = <0x100 0x80>; + cell-index = <2>; + interrupt-parent = <&mpic>; + interrupts = <22 2>; + }; + dma-channel@180 { + compatible = "fsl,mpc8540-dma-channel", + "fsl,eloplus-dma-channel"; + reg = <0x180 0x80>; + cell-index = <3>; + interrupt-parent = <&mpic>; + interrupts = <23 2>; + }; + }; + + enet0: ethernet@24000 { + #address-cells = <1>; + #size-cells = <1>; + cell-index = <0>; + device_type = "network"; + model = "TSEC"; + compatible = "gianfar"; + reg = <0x24000 0x1000>; + ranges = <0x0 0x24000 0x1000>; + local-mac-address = [ 00 00 00 00 00 00 ]; + interrupts = <29 2 30 2 34 2>; + interrupt-parent = <&mpic>; + phy-handle = <&phy2>; + + mdio@520 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,gianfar-mdio"; + reg = <0x520 0x20>; + + phy1: ethernet-phy@1 { + interrupt-parent = <&mpic>; + interrupts = <8 1>; + reg = <1>; + }; + phy2: ethernet-phy@2 { + interrupt-parent = <&mpic>; + interrupts = <8 1>; + reg = <2>; + }; + phy3: ethernet-phy@3 { + interrupt-parent = <&mpic>; + interrupts = <8 1>; + reg = <3>; + }; + tbi0: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + }; + + enet1: ethernet@25000 { + #address-cells = <1>; + #size-cells = <1>; + cell-index = <1>; + device_type = "network"; + model = "TSEC"; + compatible = "gianfar"; + reg = <0x25000 0x1000>; + ranges = <0x0 0x25000 0x1000>; + local-mac-address = [ 00 00 00 00 00 00 ]; + interrupts = <35 2 36 2 40 2>; + interrupt-parent = <&mpic>; + phy-handle = <&phy1>; + + mdio@520 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,gianfar-tbi"; + reg = <0x520 0x20>; + + tbi1: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + }; + + enet2: ethernet@26000 { + #address-cells = <1>; + #size-cells = <1>; + cell-index = <2>; + device_type = "network"; + model = "FEC"; + compatible = "gianfar"; + reg = <0x26000 0x1000>; + ranges = <0x0 0x26000 0x1000>; + local-mac-address = [ 00 00 00 00 00 00 ]; + interrupts = <41 2>; + interrupt-parent = <&mpic>; + phy-handle = <&phy3>; + + mdio@520 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,gianfar-tbi"; + reg = <0x520 0x20>; + + tbi2: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + }; + + serial0: serial@4500 { + cell-index = <0>; + device_type = "serial"; + compatible = "fsl,ns16550", "ns16550"; + reg = <0x4500 0x100>; // reg base, size + clock-frequency = <0>; // should we fill in in uboot? + interrupts = <42 2>; + interrupt-parent = <&mpic>; + }; + + serial1: serial@4600 { + cell-index = <1>; + device_type = "serial"; + compatible = "fsl,ns16550", "ns16550"; + reg = <0x4600 0x100>; // reg base, size + clock-frequency = <0>; // should we fill in in uboot? + interrupts = <42 2>; + interrupt-parent = <&mpic>; + }; + + mpic: pic@40000 { + interrupt-controller; + #address-cells = <0>; + #interrupt-cells = <2>; + reg = <0x40000 0x40000>; + device_type = "open-pic"; + compatible = "chrp,open-pic"; + }; + }; + + localbus@e0005000 { + #address-cells = <2>; + #size-cells = <1>; + compatible = "fsl,mpc8540-localbus", "fsl,pq3-localbus", + "simple-bus"; + reg = <0xe0005000 0x1000>; + interrupt-parent = <&mpic>; + interrupts = <19 2>; + + ranges = <0x0 0x0 0xfe000000 0x02000000>; + + nor@0,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "cfi-flash"; + reg = <0x0 0x0 0x02000000>; + bank-width = <4>; + device-width = <2>; + partition@0 { + label = "kernel"; + reg = <0x00000000 0x00180000>; + }; + partition@180000 { + label = "root"; + reg = <0x00180000 0x01dc0000>; + }; + partition@1f40000 { + label = "env1"; + reg = <0x01f40000 0x00040000>; + }; + partition@1f80000 { + label = "env2"; + reg = <0x01f80000 0x00040000>; + }; + partition@1fc0000 { + label = "u-boot"; + reg = <0x01fc0000 0x00040000>; + read-only; + }; + }; + }; + + pci0: pci@e0008000 { + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + compatible = "fsl,mpc8540-pcix", "fsl,mpc8540-pci"; + device_type = "pci"; + reg = <0xe0008000 0x1000>; + clock-frequency = <66666666>; + interrupt-map-mask = <0xf800 0x0 0x0 0x7>; + interrupt-map = < + /* IDSEL 28 */ + 0xe000 0 0 1 &mpic 2 1 + 0xe000 0 0 2 &mpic 3 1 + 0xe000 0 0 3 &mpic 6 1 + 0xe000 0 0 4 &mpic 5 1 + + /* IDSEL 11 */ + 0x5800 0 0 1 &mpic 6 1 + 0x5800 0 0 2 &mpic 5 1 + >; + + interrupt-parent = <&mpic>; + interrupts = <24 2>; + bus-range = <0 0>; + ranges = <0x02000000 0 0x80000000 0x80000000 0 0x20000000 + 0x01000000 0 0x00000000 0xe2000000 0 0x01000000>; + }; +}; diff --git a/arch/powerpc/boot/dts/tqm8541.dts b/arch/powerpc/boot/dts/tqm8541.dts new file mode 100644 index 000000000..84dce2d5f --- /dev/null +++ b/arch/powerpc/boot/dts/tqm8541.dts @@ -0,0 +1,326 @@ +/* + * TQM 8541 Device Tree Source + * + * Copyright 2008 Freescale Semiconductor Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +/dts-v1/; + +/ { + model = "tqc,tqm8541"; + compatible = "tqc,tqm8541"; + #address-cells = <1>; + #size-cells = <1>; + + aliases { + ethernet0 = &enet0; + ethernet1 = &enet1; + serial0 = &serial0; + serial1 = &serial1; + pci0 = &pci0; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + PowerPC,8541@0 { + device_type = "cpu"; + reg = <0>; + d-cache-line-size = <32>; + i-cache-line-size = <32>; + d-cache-size = <32768>; + i-cache-size = <32768>; + timebase-frequency = <0>; + bus-frequency = <0>; + clock-frequency = <0>; + next-level-cache = <&L2>; + }; + }; + + memory { + device_type = "memory"; + reg = <0x00000000 0x10000000>; + }; + + soc@e0000000 { + #address-cells = <1>; + #size-cells = <1>; + device_type = "soc"; + ranges = <0x0 0xe0000000 0x100000>; + bus-frequency = <0>; + compatible = "fsl,mpc8541-immr", "simple-bus"; + + ecm-law@0 { + compatible = "fsl,ecm-law"; + reg = <0x0 0x1000>; + fsl,num-laws = <8>; + }; + + ecm@1000 { + compatible = "fsl,mpc8541-ecm", "fsl,ecm"; + reg = <0x1000 0x1000>; + interrupts = <17 2>; + interrupt-parent = <&mpic>; + }; + + memory-controller@2000 { + compatible = "fsl,mpc8540-memory-controller"; + reg = <0x2000 0x1000>; + interrupt-parent = <&mpic>; + interrupts = <18 2>; + }; + + L2: l2-cache-controller@20000 { + compatible = "fsl,mpc8540-l2-cache-controller"; + reg = <0x20000 0x1000>; + cache-line-size = <32>; + cache-size = <0x40000>; // L2, 256K + interrupt-parent = <&mpic>; + interrupts = <16 2>; + }; + + i2c@3000 { + #address-cells = <1>; + #size-cells = <0>; + cell-index = <0>; + compatible = "fsl-i2c"; + reg = <0x3000 0x100>; + interrupts = <43 2>; + interrupt-parent = <&mpic>; + dfsrr; + + dtt@48 { + compatible = "national,lm75"; + reg = <0x48>; + }; + + rtc@68 { + compatible = "dallas,ds1337"; + reg = <0x68>; + }; + }; + + dma@21300 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,mpc8541-dma", "fsl,eloplus-dma"; + reg = <0x21300 0x4>; + ranges = <0x0 0x21100 0x200>; + cell-index = <0>; + dma-channel@0 { + compatible = "fsl,mpc8541-dma-channel", + "fsl,eloplus-dma-channel"; + reg = <0x0 0x80>; + cell-index = <0>; + interrupt-parent = <&mpic>; + interrupts = <20 2>; + }; + dma-channel@80 { + compatible = "fsl,mpc8541-dma-channel", + "fsl,eloplus-dma-channel"; + reg = <0x80 0x80>; + cell-index = <1>; + interrupt-parent = <&mpic>; + interrupts = <21 2>; + }; + dma-channel@100 { + compatible = "fsl,mpc8541-dma-channel", + "fsl,eloplus-dma-channel"; + reg = <0x100 0x80>; + cell-index = <2>; + interrupt-parent = <&mpic>; + interrupts = <22 2>; + }; + dma-channel@180 { + compatible = "fsl,mpc8541-dma-channel", + "fsl,eloplus-dma-channel"; + reg = <0x180 0x80>; + cell-index = <3>; + interrupt-parent = <&mpic>; + interrupts = <23 2>; + }; + }; + + enet0: ethernet@24000 { + #address-cells = <1>; + #size-cells = <1>; + cell-index = <0>; + device_type = "network"; + model = "TSEC"; + compatible = "gianfar"; + reg = <0x24000 0x1000>; + ranges = <0x0 0x24000 0x1000>; + local-mac-address = [ 00 00 00 00 00 00 ]; + interrupts = <29 2 30 2 34 2>; + interrupt-parent = <&mpic>; + tbi-handle = <&tbi0>; + phy-handle = <&phy2>; + + mdio@520 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,gianfar-mdio"; + reg = <0x520 0x20>; + + phy1: ethernet-phy@1 { + interrupt-parent = <&mpic>; + interrupts = <8 1>; + reg = <1>; + }; + phy2: ethernet-phy@2 { + interrupt-parent = <&mpic>; + interrupts = <8 1>; + reg = <2>; + }; + phy3: ethernet-phy@3 { + interrupt-parent = <&mpic>; + interrupts = <8 1>; + reg = <3>; + }; + tbi0: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + }; + + enet1: ethernet@25000 { + #address-cells = <1>; + #size-cells = <1>; + cell-index = <1>; + device_type = "network"; + model = "TSEC"; + compatible = "gianfar"; + reg = <0x25000 0x1000>; + ranges = <0x0 0x25000 0x1000>; + local-mac-address = [ 00 00 00 00 00 00 ]; + interrupts = <35 2 36 2 40 2>; + interrupt-parent = <&mpic>; + tbi-handle = <&tbi1>; + phy-handle = <&phy1>; + + mdio@520 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,gianfar-tbi"; + reg = <0x520 0x20>; + + tbi1: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + }; + + serial0: serial@4500 { + cell-index = <0>; + device_type = "serial"; + compatible = "fsl,ns16550", "ns16550"; + reg = <0x4500 0x100>; // reg base, size + clock-frequency = <0>; // should we fill in in uboot? + interrupts = <42 2>; + interrupt-parent = <&mpic>; + }; + + serial1: serial@4600 { + cell-index = <1>; + device_type = "serial"; + compatible = "fsl,ns16550", "ns16550"; + reg = <0x4600 0x100>; // reg base, size + clock-frequency = <0>; // should we fill in in uboot? + interrupts = <42 2>; + interrupt-parent = <&mpic>; + }; + + crypto@30000 { + compatible = "fsl,sec2.0"; + reg = <0x30000 0x10000>; + interrupts = <45 2>; + interrupt-parent = <&mpic>; + fsl,num-channels = <4>; + fsl,channel-fifo-len = <24>; + fsl,exec-units-mask = <0x7e>; + fsl,descriptor-types-mask = <0x01010ebf>; + }; + + mpic: pic@40000 { + interrupt-controller; + #address-cells = <0>; + #interrupt-cells = <2>; + reg = <0x40000 0x40000>; + device_type = "open-pic"; + compatible = "chrp,open-pic"; + }; + + cpm@919c0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,mpc8541-cpm", "fsl,cpm2", "simple-bus"; + reg = <0x919c0 0x30>; + ranges; + + muram@80000 { + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x80000 0x10000>; + + data@0 { + compatible = "fsl,cpm-muram-data"; + reg = <0 0x2000 0x9000 0x1000>; + }; + }; + + brg@919f0 { + compatible = "fsl,mpc8541-brg", + "fsl,cpm2-brg", + "fsl,cpm-brg"; + reg = <0x919f0 0x10 0x915f0 0x10>; + clock-frequency = <0>; + }; + + cpmpic: pic@90c00 { + interrupt-controller; + #address-cells = <0>; + #interrupt-cells = <2>; + interrupts = <46 2>; + interrupt-parent = <&mpic>; + reg = <0x90c00 0x80>; + compatible = "fsl,mpc8541-cpm-pic", "fsl,cpm2-pic"; + }; + }; + }; + + pci0: pci@e0008000 { + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + compatible = "fsl,mpc8540-pcix", "fsl,mpc8540-pci"; + device_type = "pci"; + reg = <0xe0008000 0x1000>; + clock-frequency = <66666666>; + interrupt-map-mask = <0xf800 0x0 0x0 0x7>; + interrupt-map = < + /* IDSEL 28 */ + 0xe000 0 0 1 &mpic 2 1 + 0xe000 0 0 2 &mpic 3 1 + 0xe000 0 0 3 &mpic 6 1 + 0xe000 0 0 4 &mpic 5 1 + + /* IDSEL 11 */ + 0x5800 0 0 1 &mpic 6 1 + 0x5800 0 0 2 &mpic 5 1 + >; + + interrupt-parent = <&mpic>; + interrupts = <24 2>; + bus-range = <0 0>; + ranges = <0x02000000 0 0x80000000 0x80000000 0 0x20000000 + 0x01000000 0 0x00000000 0xe2000000 0 0x01000000>; + }; +}; diff --git a/arch/powerpc/boot/dts/tqm8548-bigflash.dts b/arch/powerpc/boot/dts/tqm8548-bigflash.dts new file mode 100644 index 000000000..7a333dd02 --- /dev/null +++ b/arch/powerpc/boot/dts/tqm8548-bigflash.dts @@ -0,0 +1,499 @@ +/* + * TQM8548 Device Tree Source + * + * Copyright 2006 Freescale Semiconductor Inc. + * Copyright 2008 Wolfgang Grandegger <wg@denx.de> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +/dts-v1/; + +/ { + model = "tqc,tqm8548"; + compatible = "tqc,tqm8548"; + #address-cells = <1>; + #size-cells = <1>; + + aliases { + ethernet0 = &enet0; + ethernet1 = &enet1; + ethernet2 = &enet2; + ethernet3 = &enet3; + + serial0 = &serial0; + serial1 = &serial1; + pci0 = &pci0; + pci1 = &pci1; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + PowerPC,8548@0 { + device_type = "cpu"; + reg = <0>; + d-cache-line-size = <32>; // 32 bytes + i-cache-line-size = <32>; // 32 bytes + d-cache-size = <0x8000>; // L1, 32K + i-cache-size = <0x8000>; // L1, 32K + next-level-cache = <&L2>; + }; + }; + + memory { + device_type = "memory"; + reg = <0x00000000 0x00000000>; // Filled in by U-Boot + }; + + soc@a0000000 { + #address-cells = <1>; + #size-cells = <1>; + device_type = "soc"; + ranges = <0x0 0xa0000000 0x100000>; + bus-frequency = <0>; + compatible = "fsl,mpc8548-immr", "simple-bus"; + + ecm-law@0 { + compatible = "fsl,ecm-law"; + reg = <0x0 0x1000>; + fsl,num-laws = <10>; + }; + + ecm@1000 { + compatible = "fsl,mpc8548-ecm", "fsl,ecm"; + reg = <0x1000 0x1000>; + interrupts = <17 2>; + interrupt-parent = <&mpic>; + }; + + memory-controller@2000 { + compatible = "fsl,mpc8548-memory-controller"; + reg = <0x2000 0x1000>; + interrupt-parent = <&mpic>; + interrupts = <18 2>; + }; + + L2: l2-cache-controller@20000 { + compatible = "fsl,mpc8548-l2-cache-controller"; + reg = <0x20000 0x1000>; + cache-line-size = <32>; // 32 bytes + cache-size = <0x80000>; // L2, 512K + interrupt-parent = <&mpic>; + interrupts = <16 2>; + }; + + i2c@3000 { + #address-cells = <1>; + #size-cells = <0>; + cell-index = <0>; + compatible = "fsl-i2c"; + reg = <0x3000 0x100>; + interrupts = <43 2>; + interrupt-parent = <&mpic>; + dfsrr; + + dtt@48 { + compatible = "national,lm75"; + reg = <0x48>; + }; + + rtc@68 { + compatible = "dallas,ds1337"; + reg = <0x68>; + }; + }; + + i2c@3100 { + #address-cells = <1>; + #size-cells = <0>; + cell-index = <1>; + compatible = "fsl-i2c"; + reg = <0x3100 0x100>; + interrupts = <43 2>; + interrupt-parent = <&mpic>; + dfsrr; + }; + + dma@21300 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,mpc8548-dma", "fsl,eloplus-dma"; + reg = <0x21300 0x4>; + ranges = <0x0 0x21100 0x200>; + cell-index = <0>; + dma-channel@0 { + compatible = "fsl,mpc8548-dma-channel", + "fsl,eloplus-dma-channel"; + reg = <0x0 0x80>; + cell-index = <0>; + interrupt-parent = <&mpic>; + interrupts = <20 2>; + }; + dma-channel@80 { + compatible = "fsl,mpc8548-dma-channel", + "fsl,eloplus-dma-channel"; + reg = <0x80 0x80>; + cell-index = <1>; + interrupt-parent = <&mpic>; + interrupts = <21 2>; + }; + dma-channel@100 { + compatible = "fsl,mpc8548-dma-channel", + "fsl,eloplus-dma-channel"; + reg = <0x100 0x80>; + cell-index = <2>; + interrupt-parent = <&mpic>; + interrupts = <22 2>; + }; + dma-channel@180 { + compatible = "fsl,mpc8548-dma-channel", + "fsl,eloplus-dma-channel"; + reg = <0x180 0x80>; + cell-index = <3>; + interrupt-parent = <&mpic>; + interrupts = <23 2>; + }; + }; + + enet0: ethernet@24000 { + #address-cells = <1>; + #size-cells = <1>; + cell-index = <0>; + device_type = "network"; + model = "eTSEC"; + compatible = "gianfar"; + reg = <0x24000 0x1000>; + ranges = <0x0 0x24000 0x1000>; + local-mac-address = [ 00 00 00 00 00 00 ]; + interrupts = <29 2 30 2 34 2>; + interrupt-parent = <&mpic>; + tbi-handle = <&tbi0>; + phy-handle = <&phy2>; + + mdio@520 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,gianfar-mdio"; + reg = <0x520 0x20>; + + phy1: ethernet-phy@0 { + interrupt-parent = <&mpic>; + interrupts = <8 1>; + reg = <1>; + }; + phy2: ethernet-phy@1 { + interrupt-parent = <&mpic>; + interrupts = <8 1>; + reg = <2>; + }; + phy3: ethernet-phy@3 { + interrupt-parent = <&mpic>; + interrupts = <8 1>; + reg = <3>; + }; + phy4: ethernet-phy@4 { + interrupt-parent = <&mpic>; + interrupts = <8 1>; + reg = <4>; + }; + phy5: ethernet-phy@5 { + interrupt-parent = <&mpic>; + interrupts = <8 1>; + reg = <5>; + }; + tbi0: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + }; + + enet1: ethernet@25000 { + #address-cells = <1>; + #size-cells = <1>; + cell-index = <1>; + device_type = "network"; + model = "eTSEC"; + compatible = "gianfar"; + reg = <0x25000 0x1000>; + ranges = <0x0 0x25000 0x1000>; + local-mac-address = [ 00 00 00 00 00 00 ]; + interrupts = <35 2 36 2 40 2>; + interrupt-parent = <&mpic>; + tbi-handle = <&tbi1>; + phy-handle = <&phy1>; + + mdio@520 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,gianfar-tbi"; + reg = <0x520 0x20>; + + tbi1: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + }; + + enet2: ethernet@26000 { + #address-cells = <1>; + #size-cells = <1>; + cell-index = <2>; + device_type = "network"; + model = "eTSEC"; + compatible = "gianfar"; + reg = <0x26000 0x1000>; + ranges = <0x0 0x26000 0x1000>; + local-mac-address = [ 00 00 00 00 00 00 ]; + interrupts = <31 2 32 2 33 2>; + interrupt-parent = <&mpic>; + tbi-handle = <&tbi2>; + phy-handle = <&phy4>; + + mdio@520 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,gianfar-tbi"; + reg = <0x520 0x20>; + + tbi2: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + }; + + enet3: ethernet@27000 { + #address-cells = <1>; + #size-cells = <1>; + cell-index = <3>; + device_type = "network"; + model = "eTSEC"; + compatible = "gianfar"; + reg = <0x27000 0x1000>; + ranges = <0x0 0x27000 0x1000>; + local-mac-address = [ 00 00 00 00 00 00 ]; + interrupts = <37 2 38 2 39 2>; + interrupt-parent = <&mpic>; + tbi-handle = <&tbi3>; + phy-handle = <&phy5>; + + mdio@520 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,gianfar-tbi"; + reg = <0x520 0x20>; + + tbi3: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + }; + + serial0: serial@4500 { + cell-index = <0>; + device_type = "serial"; + compatible = "fsl,ns16550", "ns16550"; + reg = <0x4500 0x100>; // reg base, size + clock-frequency = <0>; // should we fill in in uboot? + current-speed = <115200>; + interrupts = <42 2>; + interrupt-parent = <&mpic>; + }; + + serial1: serial@4600 { + cell-index = <1>; + device_type = "serial"; + compatible = "fsl,ns16550", "ns16550"; + reg = <0x4600 0x100>; // reg base, size + clock-frequency = <0>; // should we fill in in uboot? + current-speed = <115200>; + interrupts = <42 2>; + interrupt-parent = <&mpic>; + }; + + global-utilities@e0000 { // global utilities reg + compatible = "fsl,mpc8548-guts"; + reg = <0xe0000 0x1000>; + fsl,has-rstcr; + }; + + mpic: pic@40000 { + interrupt-controller; + #address-cells = <0>; + #interrupt-cells = <2>; + reg = <0x40000 0x40000>; + compatible = "chrp,open-pic"; + device_type = "open-pic"; + }; + }; + + localbus@a0005000 { + compatible = "fsl,mpc8548-localbus", "fsl,pq3-localbus", + "simple-bus"; + #address-cells = <2>; + #size-cells = <1>; + reg = <0xa0005000 0x100>; // BRx, ORx, etc. + interrupt-parent = <&mpic>; + interrupts = <19 2>; + + ranges = < + 0 0x0 0xfc000000 0x04000000 // NOR FLASH bank 1 + 1 0x0 0xf8000000 0x08000000 // NOR FLASH bank 0 + 2 0x0 0xa3000000 0x00008000 // CAN (2 x CC770) + 3 0x0 0xa3010000 0x00008000 // NAND FLASH + + >; + + flash@1,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "cfi-flash"; + reg = <1 0x0 0x8000000>; + bank-width = <4>; + device-width = <1>; + + partition@0 { + label = "kernel"; + reg = <0x00000000 0x00200000>; + }; + partition@200000 { + label = "root"; + reg = <0x00200000 0x00300000>; + }; + partition@500000 { + label = "user"; + reg = <0x00500000 0x07a00000>; + }; + partition@7f00000 { + label = "env1"; + reg = <0x07f00000 0x00040000>; + }; + partition@7f40000 { + label = "env2"; + reg = <0x07f40000 0x00040000>; + }; + partition@7f80000 { + label = "u-boot"; + reg = <0x07f80000 0x00080000>; + read-only; + }; + }; + + /* Note: CAN support needs be enabled in U-Boot */ + can@2,0 { + compatible = "bosch,cc770"; // Bosch CC770 + reg = <2 0x0 0x100>; + interrupts = <4 1>; + interrupt-parent = <&mpic>; + bosch,external-clock-frequency = <16000000>; + bosch,disconnect-rx1-input; + bosch,disconnect-tx1-output; + bosch,iso-low-speed-mux; + bosch,clock-out-frequency = <16000000>; + }; + + can@2,100 { + compatible = "bosch,cc770"; // Bosch CC770 + reg = <2 0x100 0x100>; + interrupts = <4 1>; + interrupt-parent = <&mpic>; + bosch,external-clock-frequency = <16000000>; + bosch,disconnect-rx1-input; + bosch,disconnect-tx1-output; + bosch,iso-low-speed-mux; + }; + + /* Note: NAND support needs to be enabled in U-Boot */ + upm@3,0 { + #address-cells = <0>; + #size-cells = <0>; + compatible = "tqc,tqm8548-upm-nand", "fsl,upm-nand"; + reg = <3 0x0 0x800>; + fsl,upm-addr-offset = <0x10>; + fsl,upm-cmd-offset = <0x08>; + /* Micron MT29F8G08FAB multi-chip device */ + fsl,upm-addr-line-cs-offsets = <0x0 0x200>; + fsl,upm-wait-flags = <0x5>; + chip-delay = <25>; // in micro-seconds + + nand@0 { + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "fs"; + reg = <0x00000000 0x10000000>; + }; + }; + }; + }; + + pci0: pci@a0008000 { + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + compatible = "fsl,mpc8540-pcix", "fsl,mpc8540-pci"; + device_type = "pci"; + reg = <0xa0008000 0x1000>; + clock-frequency = <33333333>; + interrupt-map-mask = <0xf800 0x0 0x0 0x7>; + interrupt-map = < + /* IDSEL 28 */ + 0xe000 0 0 1 &mpic 2 1 + 0xe000 0 0 2 &mpic 3 1 + 0xe000 0 0 3 &mpic 6 1 + 0xe000 0 0 4 &mpic 5 1 + + /* IDSEL 11 */ + 0x5800 0 0 1 &mpic 6 1 + 0x5800 0 0 2 &mpic 5 1 + >; + + interrupt-parent = <&mpic>; + interrupts = <24 2>; + bus-range = <0 0>; + ranges = <0x02000000 0 0x80000000 0x80000000 0 0x20000000 + 0x01000000 0 0x00000000 0xa2000000 0 0x01000000>; + }; + + pci1: pcie@a000a000 { + interrupt-map-mask = <0xf800 0x0 0x0 0x7>; + interrupt-map = < + /* IDSEL 0x0 (PEX) */ + 0x00000 0 0 1 &mpic 0 1 + 0x00000 0 0 2 &mpic 1 1 + 0x00000 0 0 3 &mpic 2 1 + 0x00000 0 0 4 &mpic 3 1>; + + interrupt-parent = <&mpic>; + interrupts = <26 2>; + bus-range = <0 0xff>; + ranges = <0x02000000 0 0xb0000000 0xb0000000 0 0x10000000 + 0x01000000 0 0x00000000 0xaf000000 0 0x08000000>; + clock-frequency = <33333333>; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + reg = <0xa000a000 0x1000>; + compatible = "fsl,mpc8548-pcie"; + device_type = "pci"; + pcie@0 { + reg = <0 0 0 0 0>; + #size-cells = <2>; + #address-cells = <3>; + device_type = "pci"; + ranges = <0x02000000 0 0xb0000000 0x02000000 0 + 0xb0000000 0 0x10000000 + 0x01000000 0 0x00000000 0x01000000 0 + 0x00000000 0 0x08000000>; + }; + }; +}; diff --git a/arch/powerpc/boot/dts/tqm8548.dts b/arch/powerpc/boot/dts/tqm8548.dts new file mode 100644 index 000000000..c737caff1 --- /dev/null +++ b/arch/powerpc/boot/dts/tqm8548.dts @@ -0,0 +1,499 @@ +/* + * TQM8548 Device Tree Source + * + * Copyright 2006 Freescale Semiconductor Inc. + * Copyright 2008 Wolfgang Grandegger <wg@denx.de> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +/dts-v1/; + +/ { + model = "tqc,tqm8548"; + compatible = "tqc,tqm8548"; + #address-cells = <1>; + #size-cells = <1>; + + aliases { + ethernet0 = &enet0; + ethernet1 = &enet1; + ethernet2 = &enet2; + ethernet3 = &enet3; + + serial0 = &serial0; + serial1 = &serial1; + pci0 = &pci0; + pci1 = &pci1; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + PowerPC,8548@0 { + device_type = "cpu"; + reg = <0>; + d-cache-line-size = <32>; // 32 bytes + i-cache-line-size = <32>; // 32 bytes + d-cache-size = <0x8000>; // L1, 32K + i-cache-size = <0x8000>; // L1, 32K + next-level-cache = <&L2>; + }; + }; + + memory { + device_type = "memory"; + reg = <0x00000000 0x00000000>; // Filled in by U-Boot + }; + + soc@e0000000 { + #address-cells = <1>; + #size-cells = <1>; + device_type = "soc"; + ranges = <0x0 0xe0000000 0x100000>; + bus-frequency = <0>; + compatible = "fsl,mpc8548-immr", "simple-bus"; + + ecm-law@0 { + compatible = "fsl,ecm-law"; + reg = <0x0 0x1000>; + fsl,num-laws = <10>; + }; + + ecm@1000 { + compatible = "fsl,mpc8548-ecm", "fsl,ecm"; + reg = <0x1000 0x1000>; + interrupts = <17 2>; + interrupt-parent = <&mpic>; + }; + + memory-controller@2000 { + compatible = "fsl,mpc8548-memory-controller"; + reg = <0x2000 0x1000>; + interrupt-parent = <&mpic>; + interrupts = <18 2>; + }; + + L2: l2-cache-controller@20000 { + compatible = "fsl,mpc8548-l2-cache-controller"; + reg = <0x20000 0x1000>; + cache-line-size = <32>; // 32 bytes + cache-size = <0x80000>; // L2, 512K + interrupt-parent = <&mpic>; + interrupts = <16 2>; + }; + + i2c@3000 { + #address-cells = <1>; + #size-cells = <0>; + cell-index = <0>; + compatible = "fsl-i2c"; + reg = <0x3000 0x100>; + interrupts = <43 2>; + interrupt-parent = <&mpic>; + dfsrr; + + dtt@48 { + compatible = "national,lm75"; + reg = <0x48>; + }; + + rtc@68 { + compatible = "dallas,ds1337"; + reg = <0x68>; + }; + }; + + i2c@3100 { + #address-cells = <1>; + #size-cells = <0>; + cell-index = <1>; + compatible = "fsl-i2c"; + reg = <0x3100 0x100>; + interrupts = <43 2>; + interrupt-parent = <&mpic>; + dfsrr; + }; + + dma@21300 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,mpc8548-dma", "fsl,eloplus-dma"; + reg = <0x21300 0x4>; + ranges = <0x0 0x21100 0x200>; + cell-index = <0>; + dma-channel@0 { + compatible = "fsl,mpc8548-dma-channel", + "fsl,eloplus-dma-channel"; + reg = <0x0 0x80>; + cell-index = <0>; + interrupt-parent = <&mpic>; + interrupts = <20 2>; + }; + dma-channel@80 { + compatible = "fsl,mpc8548-dma-channel", + "fsl,eloplus-dma-channel"; + reg = <0x80 0x80>; + cell-index = <1>; + interrupt-parent = <&mpic>; + interrupts = <21 2>; + }; + dma-channel@100 { + compatible = "fsl,mpc8548-dma-channel", + "fsl,eloplus-dma-channel"; + reg = <0x100 0x80>; + cell-index = <2>; + interrupt-parent = <&mpic>; + interrupts = <22 2>; + }; + dma-channel@180 { + compatible = "fsl,mpc8548-dma-channel", + "fsl,eloplus-dma-channel"; + reg = <0x180 0x80>; + cell-index = <3>; + interrupt-parent = <&mpic>; + interrupts = <23 2>; + }; + }; + + enet0: ethernet@24000 { + #address-cells = <1>; + #size-cells = <1>; + cell-index = <0>; + device_type = "network"; + model = "eTSEC"; + compatible = "gianfar"; + reg = <0x24000 0x1000>; + ranges = <0x0 0x24000 0x1000>; + local-mac-address = [ 00 00 00 00 00 00 ]; + interrupts = <29 2 30 2 34 2>; + interrupt-parent = <&mpic>; + tbi-handle = <&tbi0>; + phy-handle = <&phy2>; + + mdio@520 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,gianfar-mdio"; + reg = <0x520 0x20>; + + phy1: ethernet-phy@0 { + interrupt-parent = <&mpic>; + interrupts = <8 1>; + reg = <1>; + }; + phy2: ethernet-phy@1 { + interrupt-parent = <&mpic>; + interrupts = <8 1>; + reg = <2>; + }; + phy3: ethernet-phy@3 { + interrupt-parent = <&mpic>; + interrupts = <8 1>; + reg = <3>; + }; + phy4: ethernet-phy@4 { + interrupt-parent = <&mpic>; + interrupts = <8 1>; + reg = <4>; + }; + phy5: ethernet-phy@5 { + interrupt-parent = <&mpic>; + interrupts = <8 1>; + reg = <5>; + }; + tbi0: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + }; + + enet1: ethernet@25000 { + #address-cells = <1>; + #size-cells = <1>; + cell-index = <1>; + device_type = "network"; + model = "eTSEC"; + compatible = "gianfar"; + reg = <0x25000 0x1000>; + ranges = <0x0 0x25000 0x1000>; + local-mac-address = [ 00 00 00 00 00 00 ]; + interrupts = <35 2 36 2 40 2>; + interrupt-parent = <&mpic>; + tbi-handle = <&tbi1>; + phy-handle = <&phy1>; + + mdio@520 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,gianfar-tbi"; + reg = <0x520 0x20>; + + tbi1: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + }; + + enet2: ethernet@26000 { + #address-cells = <1>; + #size-cells = <1>; + cell-index = <2>; + device_type = "network"; + model = "eTSEC"; + compatible = "gianfar"; + reg = <0x26000 0x1000>; + ranges = <0x0 0x26000 0x1000>; + local-mac-address = [ 00 00 00 00 00 00 ]; + interrupts = <31 2 32 2 33 2>; + interrupt-parent = <&mpic>; + tbi-handle = <&tbi2>; + phy-handle = <&phy4>; + + mdio@520 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,gianfar-tbi"; + reg = <0x520 0x20>; + + tbi2: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + }; + + enet3: ethernet@27000 { + #address-cells = <1>; + #size-cells = <1>; + cell-index = <3>; + device_type = "network"; + model = "eTSEC"; + compatible = "gianfar"; + reg = <0x27000 0x1000>; + ranges = <0x0 0x27000 0x1000>; + local-mac-address = [ 00 00 00 00 00 00 ]; + interrupts = <37 2 38 2 39 2>; + interrupt-parent = <&mpic>; + tbi-handle = <&tbi3>; + phy-handle = <&phy5>; + + mdio@520 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,gianfar-tbi"; + reg = <0x520 0x20>; + + tbi3: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + }; + + serial0: serial@4500 { + cell-index = <0>; + device_type = "serial"; + compatible = "fsl,ns16550", "ns16550"; + reg = <0x4500 0x100>; // reg base, size + clock-frequency = <0>; // should we fill in in uboot? + current-speed = <115200>; + interrupts = <42 2>; + interrupt-parent = <&mpic>; + }; + + serial1: serial@4600 { + cell-index = <1>; + device_type = "serial"; + compatible = "fsl,ns16550", "ns16550"; + reg = <0x4600 0x100>; // reg base, size + clock-frequency = <0>; // should we fill in in uboot? + current-speed = <115200>; + interrupts = <42 2>; + interrupt-parent = <&mpic>; + }; + + global-utilities@e0000 { // global utilities reg + compatible = "fsl,mpc8548-guts"; + reg = <0xe0000 0x1000>; + fsl,has-rstcr; + }; + + mpic: pic@40000 { + interrupt-controller; + #address-cells = <0>; + #interrupt-cells = <2>; + reg = <0x40000 0x40000>; + compatible = "chrp,open-pic"; + device_type = "open-pic"; + }; + }; + + localbus@e0005000 { + compatible = "fsl,mpc8548-localbus", "fsl,pq3-localbus", + "simple-bus"; + #address-cells = <2>; + #size-cells = <1>; + reg = <0xe0005000 0x100>; // BRx, ORx, etc. + interrupt-parent = <&mpic>; + interrupts = <19 2>; + + ranges = < + 0 0x0 0xfc000000 0x04000000 // NOR FLASH bank 1 + 1 0x0 0xf8000000 0x08000000 // NOR FLASH bank 0 + 2 0x0 0xe3000000 0x00008000 // CAN (2 x CC770) + 3 0x0 0xe3010000 0x00008000 // NAND FLASH + + >; + + flash@1,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "cfi-flash"; + reg = <1 0x0 0x8000000>; + bank-width = <4>; + device-width = <1>; + + partition@0 { + label = "kernel"; + reg = <0x00000000 0x00200000>; + }; + partition@200000 { + label = "root"; + reg = <0x00200000 0x00300000>; + }; + partition@500000 { + label = "user"; + reg = <0x00500000 0x07a00000>; + }; + partition@7f00000 { + label = "env1"; + reg = <0x07f00000 0x00040000>; + }; + partition@7f40000 { + label = "env2"; + reg = <0x07f40000 0x00040000>; + }; + partition@7f80000 { + label = "u-boot"; + reg = <0x07f80000 0x00080000>; + read-only; + }; + }; + + /* Note: CAN support needs be enabled in U-Boot */ + can@2,0 { + compatible = "bosch,cc770"; // Bosch CC770 + reg = <2 0x0 0x100>; + interrupts = <4 1>; + interrupt-parent = <&mpic>; + bosch,external-clock-frequency = <16000000>; + bosch,disconnect-rx1-input; + bosch,disconnect-tx1-output; + bosch,iso-low-speed-mux; + bosch,clock-out-frequency = <16000000>; + }; + + can@2,100 { + compatible = "bosch,cc770"; // Bosch CC770 + reg = <2 0x100 0x100>; + interrupts = <4 1>; + interrupt-parent = <&mpic>; + bosch,external-clock-frequency = <16000000>; + bosch,disconnect-rx1-input; + bosch,disconnect-tx1-output; + bosch,iso-low-speed-mux; + }; + + /* Note: NAND support needs to be enabled in U-Boot */ + upm@3,0 { + #address-cells = <0>; + #size-cells = <0>; + compatible = "tqc,tqm8548-upm-nand", "fsl,upm-nand"; + reg = <3 0x0 0x800>; + fsl,upm-addr-offset = <0x10>; + fsl,upm-cmd-offset = <0x08>; + /* Micron MT29F8G08FAB multi-chip device */ + fsl,upm-addr-line-cs-offsets = <0x0 0x200>; + fsl,upm-wait-flags = <0x5>; + chip-delay = <25>; // in micro-seconds + + nand@0 { + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "fs"; + reg = <0x00000000 0x10000000>; + }; + }; + }; + }; + + pci0: pci@e0008000 { + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + compatible = "fsl,mpc8540-pcix", "fsl,mpc8540-pci"; + device_type = "pci"; + reg = <0xe0008000 0x1000>; + clock-frequency = <33333333>; + interrupt-map-mask = <0xf800 0x0 0x0 0x7>; + interrupt-map = < + /* IDSEL 28 */ + 0xe000 0 0 1 &mpic 2 1 + 0xe000 0 0 2 &mpic 3 1 + 0xe000 0 0 3 &mpic 6 1 + 0xe000 0 0 4 &mpic 5 1 + + /* IDSEL 11 */ + 0x5800 0 0 1 &mpic 6 1 + 0x5800 0 0 2 &mpic 5 1 + >; + + interrupt-parent = <&mpic>; + interrupts = <24 2>; + bus-range = <0 0>; + ranges = <0x02000000 0 0x80000000 0x80000000 0 0x20000000 + 0x01000000 0 0x00000000 0xe2000000 0 0x01000000>; + }; + + pci1: pcie@e000a000 { + interrupt-map-mask = <0xf800 0x0 0x0 0x7>; + interrupt-map = < + /* IDSEL 0x0 (PEX) */ + 0x00000 0 0 1 &mpic 0 1 + 0x00000 0 0 2 &mpic 1 1 + 0x00000 0 0 3 &mpic 2 1 + 0x00000 0 0 4 &mpic 3 1>; + + interrupt-parent = <&mpic>; + interrupts = <26 2>; + bus-range = <0 0xff>; + ranges = <0x02000000 0 0xc0000000 0xc0000000 0 0x20000000 + 0x01000000 0 0x00000000 0xef000000 0 0x08000000>; + clock-frequency = <33333333>; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + reg = <0xe000a000 0x1000>; + compatible = "fsl,mpc8548-pcie"; + device_type = "pci"; + pcie@0 { + reg = <0 0 0 0 0>; + #size-cells = <2>; + #address-cells = <3>; + device_type = "pci"; + ranges = <0x02000000 0 0xc0000000 0x02000000 0 + 0xc0000000 0 0x20000000 + 0x01000000 0 0x00000000 0x01000000 0 + 0x00000000 0 0x08000000>; + }; + }; +}; diff --git a/arch/powerpc/boot/dts/tqm8555.dts b/arch/powerpc/boot/dts/tqm8555.dts new file mode 100644 index 000000000..d0416a5cd --- /dev/null +++ b/arch/powerpc/boot/dts/tqm8555.dts @@ -0,0 +1,326 @@ +/* + * TQM 8555 Device Tree Source + * + * Copyright 2008 Freescale Semiconductor Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +/dts-v1/; + +/ { + model = "tqc,tqm8555"; + compatible = "tqc,tqm8555"; + #address-cells = <1>; + #size-cells = <1>; + + aliases { + ethernet0 = &enet0; + ethernet1 = &enet1; + serial0 = &serial0; + serial1 = &serial1; + pci0 = &pci0; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + PowerPC,8555@0 { + device_type = "cpu"; + reg = <0>; + d-cache-line-size = <32>; + i-cache-line-size = <32>; + d-cache-size = <32768>; + i-cache-size = <32768>; + timebase-frequency = <0>; + bus-frequency = <0>; + clock-frequency = <0>; + next-level-cache = <&L2>; + }; + }; + + memory { + device_type = "memory"; + reg = <0x00000000 0x10000000>; + }; + + soc@e0000000 { + #address-cells = <1>; + #size-cells = <1>; + device_type = "soc"; + ranges = <0x0 0xe0000000 0x100000>; + bus-frequency = <0>; + compatible = "fsl,mpc8555-immr", "simple-bus"; + + ecm-law@0 { + compatible = "fsl,ecm-law"; + reg = <0x0 0x1000>; + fsl,num-laws = <8>; + }; + + ecm@1000 { + compatible = "fsl,mpc8555-ecm", "fsl,ecm"; + reg = <0x1000 0x1000>; + interrupts = <17 2>; + interrupt-parent = <&mpic>; + }; + + memory-controller@2000 { + compatible = "fsl,mpc8540-memory-controller"; + reg = <0x2000 0x1000>; + interrupt-parent = <&mpic>; + interrupts = <18 2>; + }; + + L2: l2-cache-controller@20000 { + compatible = "fsl,mpc8540-l2-cache-controller"; + reg = <0x20000 0x1000>; + cache-line-size = <32>; + cache-size = <0x40000>; // L2, 256K + interrupt-parent = <&mpic>; + interrupts = <16 2>; + }; + + i2c@3000 { + #address-cells = <1>; + #size-cells = <0>; + cell-index = <0>; + compatible = "fsl-i2c"; + reg = <0x3000 0x100>; + interrupts = <43 2>; + interrupt-parent = <&mpic>; + dfsrr; + + dtt@48 { + compatible = "national,lm75"; + reg = <0x48>; + }; + + rtc@68 { + compatible = "dallas,ds1337"; + reg = <0x68>; + }; + }; + + dma@21300 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,mpc8555-dma", "fsl,eloplus-dma"; + reg = <0x21300 0x4>; + ranges = <0x0 0x21100 0x200>; + cell-index = <0>; + dma-channel@0 { + compatible = "fsl,mpc8555-dma-channel", + "fsl,eloplus-dma-channel"; + reg = <0x0 0x80>; + cell-index = <0>; + interrupt-parent = <&mpic>; + interrupts = <20 2>; + }; + dma-channel@80 { + compatible = "fsl,mpc8555-dma-channel", + "fsl,eloplus-dma-channel"; + reg = <0x80 0x80>; + cell-index = <1>; + interrupt-parent = <&mpic>; + interrupts = <21 2>; + }; + dma-channel@100 { + compatible = "fsl,mpc8555-dma-channel", + "fsl,eloplus-dma-channel"; + reg = <0x100 0x80>; + cell-index = <2>; + interrupt-parent = <&mpic>; + interrupts = <22 2>; + }; + dma-channel@180 { + compatible = "fsl,mpc8555-dma-channel", + "fsl,eloplus-dma-channel"; + reg = <0x180 0x80>; + cell-index = <3>; + interrupt-parent = <&mpic>; + interrupts = <23 2>; + }; + }; + + enet0: ethernet@24000 { + #address-cells = <1>; + #size-cells = <1>; + cell-index = <0>; + device_type = "network"; + model = "TSEC"; + compatible = "gianfar"; + reg = <0x24000 0x1000>; + ranges = <0x0 0x24000 0x1000>; + local-mac-address = [ 00 00 00 00 00 00 ]; + interrupts = <29 2 30 2 34 2>; + interrupt-parent = <&mpic>; + tbi-handle = <&tbi0>; + phy-handle = <&phy2>; + + mdio@520 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,gianfar-mdio"; + reg = <0x520 0x20>; + + phy1: ethernet-phy@1 { + interrupt-parent = <&mpic>; + interrupts = <8 1>; + reg = <1>; + }; + phy2: ethernet-phy@2 { + interrupt-parent = <&mpic>; + interrupts = <8 1>; + reg = <2>; + }; + phy3: ethernet-phy@3 { + interrupt-parent = <&mpic>; + interrupts = <8 1>; + reg = <3>; + }; + tbi0: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + }; + + enet1: ethernet@25000 { + #address-cells = <1>; + #size-cells = <1>; + cell-index = <1>; + device_type = "network"; + model = "TSEC"; + compatible = "gianfar"; + reg = <0x25000 0x1000>; + ranges = <0x0 0x25000 0x1000>; + local-mac-address = [ 00 00 00 00 00 00 ]; + interrupts = <35 2 36 2 40 2>; + interrupt-parent = <&mpic>; + tbi-handle = <&tbi1>; + phy-handle = <&phy1>; + + mdio@520 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,gianfar-tbi"; + reg = <0x520 0x20>; + + tbi1: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + }; + + serial0: serial@4500 { + cell-index = <0>; + device_type = "serial"; + compatible = "fsl,ns16550", "ns16550"; + reg = <0x4500 0x100>; // reg base, size + clock-frequency = <0>; // should we fill in in uboot? + interrupts = <42 2>; + interrupt-parent = <&mpic>; + }; + + serial1: serial@4600 { + cell-index = <1>; + device_type = "serial"; + compatible = "fsl,ns16550", "ns16550"; + reg = <0x4600 0x100>; // reg base, size + clock-frequency = <0>; // should we fill in in uboot? + interrupts = <42 2>; + interrupt-parent = <&mpic>; + }; + + crypto@30000 { + compatible = "fsl,sec2.0"; + reg = <0x30000 0x10000>; + interrupts = <45 2>; + interrupt-parent = <&mpic>; + fsl,num-channels = <4>; + fsl,channel-fifo-len = <24>; + fsl,exec-units-mask = <0x7e>; + fsl,descriptor-types-mask = <0x01010ebf>; + }; + + mpic: pic@40000 { + interrupt-controller; + #address-cells = <0>; + #interrupt-cells = <2>; + reg = <0x40000 0x40000>; + device_type = "open-pic"; + compatible = "chrp,open-pic"; + }; + + cpm@919c0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,mpc8555-cpm", "fsl,cpm2", "simple-bus"; + reg = <0x919c0 0x30>; + ranges; + + muram@80000 { + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x80000 0x10000>; + + data@0 { + compatible = "fsl,cpm-muram-data"; + reg = <0 0x2000 0x9000 0x1000>; + }; + }; + + brg@919f0 { + compatible = "fsl,mpc8555-brg", + "fsl,cpm2-brg", + "fsl,cpm-brg"; + reg = <0x919f0 0x10 0x915f0 0x10>; + clock-frequency = <0>; + }; + + cpmpic: pic@90c00 { + interrupt-controller; + #address-cells = <0>; + #interrupt-cells = <2>; + interrupts = <46 2>; + interrupt-parent = <&mpic>; + reg = <0x90c00 0x80>; + compatible = "fsl,mpc8555-cpm-pic", "fsl,cpm2-pic"; + }; + }; + }; + + pci0: pci@e0008000 { + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + compatible = "fsl,mpc8540-pcix", "fsl,mpc8540-pci"; + device_type = "pci"; + reg = <0xe0008000 0x1000>; + clock-frequency = <66666666>; + interrupt-map-mask = <0xf800 0x0 0x0 0x7>; + interrupt-map = < + /* IDSEL 28 */ + 0xe000 0 0 1 &mpic 2 1 + 0xe000 0 0 2 &mpic 3 1 + 0xe000 0 0 3 &mpic 6 1 + 0xe000 0 0 4 &mpic 5 1 + + /* IDSEL 11 */ + 0x5800 0 0 1 &mpic 6 1 + 0x5800 0 0 2 &mpic 5 1 + >; + + interrupt-parent = <&mpic>; + interrupts = <24 2>; + bus-range = <0 0>; + ranges = <0x02000000 0 0x80000000 0x80000000 0 0x20000000 + 0x01000000 0 0x00000000 0xe2000000 0 0x01000000>; + }; +}; diff --git a/arch/powerpc/boot/dts/tqm8560.dts b/arch/powerpc/boot/dts/tqm8560.dts new file mode 100644 index 000000000..f9a11ebf7 --- /dev/null +++ b/arch/powerpc/boot/dts/tqm8560.dts @@ -0,0 +1,399 @@ +/* + * TQM 8560 Device Tree Source + * + * Copyright 2008 Freescale Semiconductor Inc. + * Copyright 2008 Wolfgang Grandegger <wg@grandegger.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +/dts-v1/; + +/ { + model = "tqc,tqm8560"; + compatible = "tqc,tqm8560"; + #address-cells = <1>; + #size-cells = <1>; + + aliases { + ethernet0 = &enet0; + ethernet1 = &enet1; + ethernet2 = &enet2; + serial0 = &serial0; + serial1 = &serial1; + pci0 = &pci0; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + PowerPC,8560@0 { + device_type = "cpu"; + reg = <0>; + d-cache-line-size = <32>; + i-cache-line-size = <32>; + d-cache-size = <32768>; + i-cache-size = <32768>; + timebase-frequency = <0>; + bus-frequency = <0>; + clock-frequency = <0>; + next-level-cache = <&L2>; + }; + }; + + memory { + device_type = "memory"; + reg = <0x00000000 0x10000000>; + }; + + soc@e0000000 { + #address-cells = <1>; + #size-cells = <1>; + device_type = "soc"; + ranges = <0x0 0xe0000000 0x100000>; + bus-frequency = <0>; + compatible = "fsl,mpc8560-immr", "simple-bus"; + + ecm-law@0 { + compatible = "fsl,ecm-law"; + reg = <0x0 0x1000>; + fsl,num-laws = <8>; + }; + + ecm@1000 { + compatible = "fsl,mpc8560-ecm", "fsl,ecm"; + reg = <0x1000 0x1000>; + interrupts = <17 2>; + interrupt-parent = <&mpic>; + }; + + memory-controller@2000 { + compatible = "fsl,mpc8540-memory-controller"; + reg = <0x2000 0x1000>; + interrupt-parent = <&mpic>; + interrupts = <18 2>; + }; + + L2: l2-cache-controller@20000 { + compatible = "fsl,mpc8540-l2-cache-controller"; + reg = <0x20000 0x1000>; + cache-line-size = <32>; + cache-size = <0x40000>; // L2, 256K + interrupt-parent = <&mpic>; + interrupts = <16 2>; + }; + + i2c@3000 { + #address-cells = <1>; + #size-cells = <0>; + cell-index = <0>; + compatible = "fsl-i2c"; + reg = <0x3000 0x100>; + interrupts = <43 2>; + interrupt-parent = <&mpic>; + dfsrr; + + dtt@48 { + compatible = "national,lm75"; + reg = <0x48>; + }; + + rtc@68 { + compatible = "dallas,ds1337"; + reg = <0x68>; + }; + }; + + dma@21300 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,mpc8560-dma", "fsl,eloplus-dma"; + reg = <0x21300 0x4>; + ranges = <0x0 0x21100 0x200>; + cell-index = <0>; + dma-channel@0 { + compatible = "fsl,mpc8560-dma-channel", + "fsl,eloplus-dma-channel"; + reg = <0x0 0x80>; + cell-index = <0>; + interrupt-parent = <&mpic>; + interrupts = <20 2>; + }; + dma-channel@80 { + compatible = "fsl,mpc8560-dma-channel", + "fsl,eloplus-dma-channel"; + reg = <0x80 0x80>; + cell-index = <1>; + interrupt-parent = <&mpic>; + interrupts = <21 2>; + }; + dma-channel@100 { + compatible = "fsl,mpc8560-dma-channel", + "fsl,eloplus-dma-channel"; + reg = <0x100 0x80>; + cell-index = <2>; + interrupt-parent = <&mpic>; + interrupts = <22 2>; + }; + dma-channel@180 { + compatible = "fsl,mpc8560-dma-channel", + "fsl,eloplus-dma-channel"; + reg = <0x180 0x80>; + cell-index = <3>; + interrupt-parent = <&mpic>; + interrupts = <23 2>; + }; + }; + + enet0: ethernet@24000 { + #address-cells = <1>; + #size-cells = <1>; + cell-index = <0>; + device_type = "network"; + model = "TSEC"; + compatible = "gianfar"; + reg = <0x24000 0x1000>; + ranges = <0x0 0x24000 0x1000>; + local-mac-address = [ 00 00 00 00 00 00 ]; + interrupts = <29 2 30 2 34 2>; + interrupt-parent = <&mpic>; + tbi-handle = <&tbi0>; + phy-handle = <&phy2>; + + mdio@520 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,gianfar-mdio"; + reg = <0x520 0x20>; + + phy1: ethernet-phy@1 { + interrupt-parent = <&mpic>; + interrupts = <8 1>; + reg = <1>; + }; + phy2: ethernet-phy@2 { + interrupt-parent = <&mpic>; + interrupts = <8 1>; + reg = <2>; + }; + phy3: ethernet-phy@3 { + interrupt-parent = <&mpic>; + interrupts = <8 1>; + reg = <3>; + }; + tbi0: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + }; + + enet1: ethernet@25000 { + #address-cells = <1>; + #size-cells = <1>; + cell-index = <1>; + device_type = "network"; + model = "TSEC"; + compatible = "gianfar"; + reg = <0x25000 0x1000>; + ranges = <0x0 0x25000 0x1000>; + local-mac-address = [ 00 00 00 00 00 00 ]; + interrupts = <35 2 36 2 40 2>; + interrupt-parent = <&mpic>; + tbi-handle = <&tbi1>; + phy-handle = <&phy1>; + + mdio@520 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,gianfar-tbi"; + reg = <0x520 0x20>; + + tbi1: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + }; + + mpic: pic@40000 { + interrupt-controller; + #address-cells = <0>; + #interrupt-cells = <2>; + reg = <0x40000 0x40000>; + device_type = "open-pic"; + compatible = "chrp,open-pic"; + }; + + cpm@919c0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,mpc8560-cpm", "fsl,cpm2", "simple-bus"; + reg = <0x919c0 0x30>; + ranges; + + muram@80000 { + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x80000 0x10000>; + + data@0 { + compatible = "fsl,cpm-muram-data"; + reg = <0 0x4000 0x9000 0x2000>; + }; + }; + + brg@919f0 { + compatible = "fsl,mpc8560-brg", + "fsl,cpm2-brg", + "fsl,cpm-brg"; + reg = <0x919f0 0x10 0x915f0 0x10>; + clock-frequency = <0>; + }; + + cpmpic: pic@90c00 { + interrupt-controller; + #address-cells = <0>; + #interrupt-cells = <2>; + interrupts = <46 2>; + interrupt-parent = <&mpic>; + reg = <0x90c00 0x80>; + compatible = "fsl,mpc8560-cpm-pic", "fsl,cpm2-pic"; + }; + + serial0: serial@91a00 { + device_type = "serial"; + compatible = "fsl,mpc8560-scc-uart", + "fsl,cpm2-scc-uart"; + reg = <0x91a00 0x20 0x88000 0x100>; + fsl,cpm-brg = <1>; + fsl,cpm-command = <0x800000>; + current-speed = <115200>; + interrupts = <40 8>; + interrupt-parent = <&cpmpic>; + }; + + serial1: serial@91a20 { + device_type = "serial"; + compatible = "fsl,mpc8560-scc-uart", + "fsl,cpm2-scc-uart"; + reg = <0x91a20 0x20 0x88100 0x100>; + fsl,cpm-brg = <2>; + fsl,cpm-command = <0x4a00000>; + current-speed = <115200>; + interrupts = <41 8>; + interrupt-parent = <&cpmpic>; + }; + + enet2: ethernet@91340 { + device_type = "network"; + compatible = "fsl,mpc8560-fcc-enet", + "fsl,cpm2-fcc-enet"; + reg = <0x91340 0x20 0x88600 0x100 0x913d0 0x1>; + local-mac-address = [ 00 00 00 00 00 00 ]; + fsl,cpm-command = <0x1a400300>; + interrupts = <34 8>; + interrupt-parent = <&cpmpic>; + phy-handle = <&phy3>; + }; + }; + }; + + localbus@e0005000 { + compatible = "fsl,mpc8560-localbus", "fsl,pq3-localbus", + "simple-bus"; + #address-cells = <2>; + #size-cells = <1>; + reg = <0xe0005000 0x100>; // BRx, ORx, etc. + interrupt-parent = <&mpic>; + interrupts = <19 2>; + + ranges = < + 0 0x0 0xfc000000 0x04000000 // NOR FLASH bank 1 + 1 0x0 0xf8000000 0x08000000 // NOR FLASH bank 0 + 2 0x0 0xe3000000 0x00008000 // CAN (2 x i82527) + >; + + flash@1,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "cfi-flash"; + reg = <1 0x0 0x8000000>; + bank-width = <4>; + device-width = <1>; + + partition@0 { + label = "kernel"; + reg = <0x00000000 0x00200000>; + }; + partition@200000 { + label = "root"; + reg = <0x00200000 0x00300000>; + }; + partition@500000 { + label = "user"; + reg = <0x00500000 0x07a00000>; + }; + partition@7f00000 { + label = "env1"; + reg = <0x07f00000 0x00040000>; + }; + partition@7f40000 { + label = "env2"; + reg = <0x07f40000 0x00040000>; + }; + partition@7f80000 { + label = "u-boot"; + reg = <0x07f80000 0x00080000>; + read-only; + }; + }; + + /* Note: CAN support needs be enabled in U-Boot */ + can0@2,0 { + compatible = "intel,82527"; // Bosch CC770 + reg = <2 0x0 0x100>; + interrupts = <4 1>; + interrupt-parent = <&mpic>; + }; + + can1@2,100 { + compatible = "intel,82527"; // Bosch CC770 + reg = <2 0x100 0x100>; + interrupts = <4 1>; + interrupt-parent = <&mpic>; + }; + }; + + pci0: pci@e0008000 { + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + compatible = "fsl,mpc8540-pcix", "fsl,mpc8540-pci"; + device_type = "pci"; + reg = <0xe0008000 0x1000>; + clock-frequency = <66666666>; + interrupt-map-mask = <0xf800 0x0 0x0 0x7>; + interrupt-map = < + /* IDSEL 28 */ + 0xe000 0 0 1 &mpic 2 1 + 0xe000 0 0 2 &mpic 3 1 + 0xe000 0 0 3 &mpic 6 1 + 0xe000 0 0 4 &mpic 5 1 + + /* IDSEL 11 */ + 0x5800 0 0 1 &mpic 6 1 + 0x5800 0 0 2 &mpic 5 1 + >; + + interrupt-parent = <&mpic>; + interrupts = <24 2>; + bus-range = <0 0>; + ranges = <0x02000000 0 0x80000000 0x80000000 0 0x20000000 + 0x01000000 0 0x00000000 0xe2000000 0 0x01000000>; + }; +}; diff --git a/arch/powerpc/boot/dts/tqm8xx.dts b/arch/powerpc/boot/dts/tqm8xx.dts new file mode 100644 index 000000000..3d1446b99 --- /dev/null +++ b/arch/powerpc/boot/dts/tqm8xx.dts @@ -0,0 +1,196 @@ +/* + * TQM8XX Device Tree Source + * + * Heiko Schocher <hs@denx.de> + * 2010 DENX Software Engineering GmbH + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +/dts-v1/; + +/ { + model = "TQM8xx"; + compatible = "tqc,tqm8xx"; + #address-cells = <1>; + #size-cells = <1>; + + aliases { + ethernet0 = ð0; + ethernet1 = ð1; + mdio1 = &phy1; + serial0 = &smc1; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + PowerPC,860@0 { + device_type = "cpu"; + reg = <0x0>; + d-cache-line-size = <16>; // 16 bytes + i-cache-line-size = <16>; // 16 bytes + d-cache-size = <0x1000>; // L1, 4K + i-cache-size = <0x1000>; // L1, 4K + timebase-frequency = <0>; + bus-frequency = <0>; + clock-frequency = <0>; + interrupts = <15 2>; // decrementer interrupt + interrupt-parent = <&PIC>; + }; + }; + + memory { + device_type = "memory"; + reg = <0x0 0x2000000>; + }; + + localbus@fff00100 { + compatible = "fsl,mpc860-localbus", "fsl,pq1-localbus"; + #address-cells = <2>; + #size-cells = <1>; + reg = <0xfff00100 0x40>; + + ranges = < + 0x0 0x0 0x40000000 0x800000 + 0x3 0x0 0xc0000000 0x200 + >; + + flash@0,0 { + compatible = "cfi-flash"; + reg = <0 0 0x800000>; + #address-cells = <1>; + #size-cells = <1>; + bank-width = <4>; + device-width = <2>; + }; + + /* Note: CAN support needs be enabled in U-Boot */ + can@3,0 { + compatible = "intc,82527"; + reg = <3 0x0 0x80>; + interrupts = <8 1>; + interrupt-parent = <&PIC>; + bosch,external-clock-frequency = <16000000>; + bosch,disconnect-rx1-input; + bosch,disconnect-tx1-output; + bosch,iso-low-speed-mux; + bosch,clock-out-frequency = <16000000>; + }; + + can@3,100 { + compatible = "intc,82527"; + reg = <3 0x100 0x80>; + interrupts = <8 1>; + interrupt-parent = <&PIC>; + bosch,external-clock-frequency = <16000000>; + bosch,disconnect-rx1-input; + bosch,disconnect-tx1-output; + bosch,iso-low-speed-mux; + }; + }; + + soc@fff00000 { + #address-cells = <1>; + #size-cells = <1>; + device_type = "soc"; + ranges = <0x0 0xfff00000 0x00004000>; + + phy1: mdio@e00 { + compatible = "fsl,mpc866-fec-mdio", "fsl,pq1-fec-mdio"; + reg = <0xe00 0x188>; + #address-cells = <1>; + #size-cells = <0>; + PHY: ethernet-phy@f { + reg = <0xf>; + }; + }; + + eth1: ethernet@e00 { + device_type = "network"; + compatible = "fsl,mpc866-fec-enet", + "fsl,pq1-fec-enet"; + reg = <0xe00 0x188>; + interrupts = <3 1>; + interrupt-parent = <&PIC>; + phy-handle = <&PHY>; + linux,network-index = <1>; + }; + + PIC: pic@0 { + interrupt-controller; + #interrupt-cells = <2>; + reg = <0x0 0x24>; + compatible = "fsl,mpc860-pic", "fsl,pq1-pic"; + }; + + cpm@9c0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,mpc860-cpm", "fsl,cpm1"; + ranges; + reg = <0x9c0 0x40>; + brg-frequency = <0>; + interrupts = <0 2>; // cpm error interrupt + interrupt-parent = <&CPM_PIC>; + + muram@2000 { + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x2000 0x2000>; + + data@0 { + compatible = "fsl,cpm-muram-data"; + reg = <0x0 0x2000>; + }; + }; + + brg@9f0 { + compatible = "fsl,mpc860-brg", + "fsl,cpm1-brg", + "fsl,cpm-brg"; + reg = <0x9f0 0x10>; + clock-frequency = <0>; + }; + + CPM_PIC: pic@930 { + interrupt-controller; + #address-cells = <0>; + #interrupt-cells = <1>; + interrupts = <5 2 0 2>; + interrupt-parent = <&PIC>; + reg = <0x930 0x20>; + compatible = "fsl,mpc860-cpm-pic", + "fsl,cpm1-pic"; + }; + + + smc1: serial@a80 { + device_type = "serial"; + compatible = "fsl,mpc860-smc-uart", + "fsl,cpm1-smc-uart"; + reg = <0xa80 0x10 0x3e80 0x40>; + interrupts = <4>; + interrupt-parent = <&CPM_PIC>; + fsl,cpm-brg = <1>; + fsl,cpm-command = <0x90>; + }; + + eth0: ethernet@a00 { + device_type = "network"; + compatible = "fsl,mpc860-scc-enet", + "fsl,cpm1-scc-enet"; + reg = <0xa00 0x18 0x3c00 0x100>; + interrupts = <30>; + interrupt-parent = <&CPM_PIC>; + fsl,cpm-command = <0000>; + linux,network-index = <0>; + fixed-link = <0 0 10 0 0>; + }; + }; + }; +}; diff --git a/arch/powerpc/boot/dts/uc101.dts b/arch/powerpc/boot/dts/uc101.dts new file mode 100644 index 000000000..5c462194e --- /dev/null +++ b/arch/powerpc/boot/dts/uc101.dts @@ -0,0 +1,156 @@ +/* + * Manroland uc101 board Device Tree Source + * + * Copyright (C) 2009 DENX Software Engineering GmbH + * Heiko Schocher <hs@denx.de> + * Copyright 2006-2007 Secret Lab Technologies Ltd. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +/include/ "mpc5200b.dtsi" + +&gpt0 { gpio-controller; }; +&gpt1 { gpio-controller; }; +&gpt2 { gpio-controller; }; +&gpt3 { gpio-controller; }; +&gpt4 { gpio-controller; }; +&gpt5 { gpio-controller; }; +&gpt6 { gpio-controller; }; +&gpt7 { gpio-controller; }; + +/ { + model = "manroland,uc101"; + compatible = "manroland,uc101"; + + soc5200@f0000000 { + rtc@800 { + status = "disabled"; + }; + + can@900 { + status = "disabled"; + }; + + can@980 { + status = "disabled"; + }; + + spi@f00 { + status = "disabled"; + }; + + usb@1000 { + status = "disabled"; + }; + + psc@2000 { // PSC1 + compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart"; + }; + + psc@2200 { // PSC2 + compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart"; + }; + + psc@2400 { // PSC3 + status = "disabled"; + }; + + psc@2600 { // PSC4 + status = "disabled"; + }; + + psc@2800 { // PSC5 + status = "disabled"; + }; + + psc@2c00 { // PSC6 + compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart"; + }; + + ethernet@3000 { + phy-handle = <&phy0>; + }; + + mdio@3000 { + phy0: ethernet-phy@0 { + compatible = "intel,lxt971"; + reg = <0>; + }; + }; + + i2c@3d00 { + status = "disabled"; + }; + + i2c@3d40 { + fsl,preserve-clocking; + clock-frequency = <400000>; + + hwmon@2c { + compatible = "ad,adm9240"; + reg = <0x2c>; + }; + rtc@51 { + compatible = "nxp,pcf8563"; + reg = <0x51>; + }; + }; + }; + + pci@f0000d00 { + status = "disabled"; + }; + + localbus { + ranges = <0 0 0xff800000 0x00800000 + 1 0 0x80000000 0x00800000 + 3 0 0x80000000 0x00800000>; + + flash@0,0 { + compatible = "cfi-flash"; + reg = <0 0 0x00800000>; + bank-width = <2>; + device-width = <2>; + #size-cells = <1>; + #address-cells = <1>; + + partition@0 { + label = "DTS"; + reg = <0x0 0x00100000>; + }; + partition@100000 { + label = "Kernel"; + reg = <0x100000 0x00200000>; + }; + partition@300000 { + label = "RootFS"; + reg = <0x00300000 0x00200000>; + }; + partition@500000 { + label = "user"; + reg = <0x00500000 0x00200000>; + }; + partition@700000 { + label = "U-Boot"; + reg = <0x00700000 0x00040000>; + }; + partition@740000 { + label = "Env"; + reg = <0x00740000 0x00010000>; + }; + partition@750000 { + label = "red. Env"; + reg = <0x00750000 0x00010000>; + }; + partition@760000 { + label = "reserve"; + reg = <0x00760000 0x000a0000>; + }; + }; + + }; +}; diff --git a/arch/powerpc/boot/dts/virtex440-ml507.dts b/arch/powerpc/boot/dts/virtex440-ml507.dts new file mode 100644 index 000000000..391a4e299 --- /dev/null +++ b/arch/powerpc/boot/dts/virtex440-ml507.dts @@ -0,0 +1,406 @@ +/* + * This file supports the Xilinx ML507 board with the 440 processor. + * A reference design for the FPGA is provided at http://git.xilinx.com. + * + * (C) Copyright 2008 Xilinx, Inc. + * + * This file is licensed under the terms of the GNU General Public License + * version 2. This program is licensed "as is" without any warranty of any + * kind, whether express or implied. + * + * --- + * + * Device Tree Generator version: 1.1 + * + * CAUTION: This file is automatically generated by libgen. + * Version: Xilinx EDK 10.1.03 EDK_K_SP3.6 + * + * XPS project directory: ml507_ppc440_emb_ref + */ + +/dts-v1/; + +/ { + #address-cells = <1>; + #size-cells = <1>; + compatible = "xlnx,virtex440"; + dcr-parent = <&ppc440_0>; + model = "testing"; + DDR2_SDRAM: memory@0 { + device_type = "memory"; + reg = < 0 0x10000000 >; + } ; + chosen { + bootargs = "console=ttyS0 root=/dev/ram"; + linux,stdout-path = &RS232_Uart_1; + } ; + cpus { + #address-cells = <1>; + #cpus = <1>; + #size-cells = <0>; + ppc440_0: cpu@0 { + clock-frequency = <400000000>; + compatible = "PowerPC,440", "ibm,ppc440"; + d-cache-line-size = <0x20>; + d-cache-size = <0x8000>; + dcr-access-method = "native"; + dcr-controller ; + device_type = "cpu"; + i-cache-line-size = <0x20>; + i-cache-size = <0x8000>; + model = "PowerPC,440"; + reg = <0>; + timebase-frequency = <400000000>; + xlnx,apu-control = <1>; + xlnx,apu-udi-0 = <0>; + xlnx,apu-udi-1 = <0>; + xlnx,apu-udi-10 = <0>; + xlnx,apu-udi-11 = <0>; + xlnx,apu-udi-12 = <0>; + xlnx,apu-udi-13 = <0>; + xlnx,apu-udi-14 = <0>; + xlnx,apu-udi-15 = <0>; + xlnx,apu-udi-2 = <0>; + xlnx,apu-udi-3 = <0>; + xlnx,apu-udi-4 = <0>; + xlnx,apu-udi-5 = <0>; + xlnx,apu-udi-6 = <0>; + xlnx,apu-udi-7 = <0>; + xlnx,apu-udi-8 = <0>; + xlnx,apu-udi-9 = <0>; + xlnx,dcr-autolock-enable = <1>; + xlnx,dcu-rd-ld-cache-plb-prio = <0>; + xlnx,dcu-rd-noncache-plb-prio = <0>; + xlnx,dcu-rd-touch-plb-prio = <0>; + xlnx,dcu-rd-urgent-plb-prio = <0>; + xlnx,dcu-wr-flush-plb-prio = <0>; + xlnx,dcu-wr-store-plb-prio = <0>; + xlnx,dcu-wr-urgent-plb-prio = <0>; + xlnx,dma0-control = <0>; + xlnx,dma0-plb-prio = <0>; + xlnx,dma0-rxchannelctrl = <0x1010000>; + xlnx,dma0-rxirqtimer = <0x3ff>; + xlnx,dma0-txchannelctrl = <0x1010000>; + xlnx,dma0-txirqtimer = <0x3ff>; + xlnx,dma1-control = <0>; + xlnx,dma1-plb-prio = <0>; + xlnx,dma1-rxchannelctrl = <0x1010000>; + xlnx,dma1-rxirqtimer = <0x3ff>; + xlnx,dma1-txchannelctrl = <0x1010000>; + xlnx,dma1-txirqtimer = <0x3ff>; + xlnx,dma2-control = <0>; + xlnx,dma2-plb-prio = <0>; + xlnx,dma2-rxchannelctrl = <0x1010000>; + xlnx,dma2-rxirqtimer = <0x3ff>; + xlnx,dma2-txchannelctrl = <0x1010000>; + xlnx,dma2-txirqtimer = <0x3ff>; + xlnx,dma3-control = <0>; + xlnx,dma3-plb-prio = <0>; + xlnx,dma3-rxchannelctrl = <0x1010000>; + xlnx,dma3-rxirqtimer = <0x3ff>; + xlnx,dma3-txchannelctrl = <0x1010000>; + xlnx,dma3-txirqtimer = <0x3ff>; + xlnx,endian-reset = <0>; + xlnx,generate-plb-timespecs = <1>; + xlnx,icu-rd-fetch-plb-prio = <0>; + xlnx,icu-rd-spec-plb-prio = <0>; + xlnx,icu-rd-touch-plb-prio = <0>; + xlnx,interconnect-imask = <0xffffffff>; + xlnx,mplb-allow-lock-xfer = <1>; + xlnx,mplb-arb-mode = <0>; + xlnx,mplb-awidth = <0x20>; + xlnx,mplb-counter = <0x500>; + xlnx,mplb-dwidth = <0x80>; + xlnx,mplb-max-burst = <8>; + xlnx,mplb-native-dwidth = <0x80>; + xlnx,mplb-p2p = <0>; + xlnx,mplb-prio-dcur = <2>; + xlnx,mplb-prio-dcuw = <3>; + xlnx,mplb-prio-icu = <4>; + xlnx,mplb-prio-splb0 = <1>; + xlnx,mplb-prio-splb1 = <0>; + xlnx,mplb-read-pipe-enable = <1>; + xlnx,mplb-sync-tattribute = <0>; + xlnx,mplb-wdog-enable = <1>; + xlnx,mplb-write-pipe-enable = <1>; + xlnx,mplb-write-post-enable = <1>; + xlnx,num-dma = <1>; + xlnx,pir = <0xf>; + xlnx,ppc440mc-addr-base = <0>; + xlnx,ppc440mc-addr-high = <0xfffffff>; + xlnx,ppc440mc-arb-mode = <0>; + xlnx,ppc440mc-bank-conflict-mask = <0xc00000>; + xlnx,ppc440mc-control = <0xf810008f>; + xlnx,ppc440mc-max-burst = <8>; + xlnx,ppc440mc-prio-dcur = <2>; + xlnx,ppc440mc-prio-dcuw = <3>; + xlnx,ppc440mc-prio-icu = <4>; + xlnx,ppc440mc-prio-splb0 = <1>; + xlnx,ppc440mc-prio-splb1 = <0>; + xlnx,ppc440mc-row-conflict-mask = <0x3ffe00>; + xlnx,ppcdm-asyncmode = <0>; + xlnx,ppcds-asyncmode = <0>; + xlnx,user-reset = <0>; + DMA0: sdma@80 { + compatible = "xlnx,ll-dma-1.00.a"; + dcr-reg = < 0x80 0x11 >; + interrupt-parent = <&xps_intc_0>; + interrupts = < 10 2 11 2 >; + } ; + } ; + } ; + plb_v46_0: plb@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "xlnx,plb-v46-1.03.a", "simple-bus"; + ranges ; + DIP_Switches_8Bit: gpio@81460000 { + compatible = "xlnx,xps-gpio-1.00.a"; + interrupt-parent = <&xps_intc_0>; + interrupts = < 7 2 >; + reg = < 0x81460000 0x10000 >; + xlnx,all-inputs = <1>; + xlnx,all-inputs-2 = <0>; + xlnx,dout-default = <0>; + xlnx,dout-default-2 = <0>; + xlnx,family = "virtex5"; + xlnx,gpio-width = <8>; + xlnx,interrupt-present = <1>; + xlnx,is-bidir = <1>; + xlnx,is-bidir-2 = <1>; + xlnx,is-dual = <0>; + xlnx,tri-default = <0xffffffff>; + xlnx,tri-default-2 = <0xffffffff>; + } ; + FLASH: flash@fc000000 { + bank-width = <2>; + compatible = "xlnx,xps-mch-emc-2.00.a", "cfi-flash"; + reg = < 0xfc000000 0x2000000 >; + xlnx,family = "virtex5"; + xlnx,include-datawidth-matching-0 = <0x1>; + xlnx,include-datawidth-matching-1 = <0x0>; + xlnx,include-datawidth-matching-2 = <0x0>; + xlnx,include-datawidth-matching-3 = <0x0>; + xlnx,include-negedge-ioregs = <0x0>; + xlnx,include-plb-ipif = <0x1>; + xlnx,include-wrbuf = <0x1>; + xlnx,max-mem-width = <0x10>; + xlnx,mch-native-dwidth = <0x20>; + xlnx,mch-plb-clk-period-ps = <0x2710>; + xlnx,mch-splb-awidth = <0x20>; + xlnx,mch0-accessbuf-depth = <0x10>; + xlnx,mch0-protocol = <0x0>; + xlnx,mch0-rddatabuf-depth = <0x10>; + xlnx,mch1-accessbuf-depth = <0x10>; + xlnx,mch1-protocol = <0x0>; + xlnx,mch1-rddatabuf-depth = <0x10>; + xlnx,mch2-accessbuf-depth = <0x10>; + xlnx,mch2-protocol = <0x0>; + xlnx,mch2-rddatabuf-depth = <0x10>; + xlnx,mch3-accessbuf-depth = <0x10>; + xlnx,mch3-protocol = <0x0>; + xlnx,mch3-rddatabuf-depth = <0x10>; + xlnx,mem0-width = <0x10>; + xlnx,mem1-width = <0x20>; + xlnx,mem2-width = <0x20>; + xlnx,mem3-width = <0x20>; + xlnx,num-banks-mem = <0x1>; + xlnx,num-channels = <0x2>; + xlnx,priority-mode = <0x0>; + xlnx,synch-mem-0 = <0x0>; + xlnx,synch-mem-1 = <0x0>; + xlnx,synch-mem-2 = <0x0>; + xlnx,synch-mem-3 = <0x0>; + xlnx,synch-pipedelay-0 = <0x2>; + xlnx,synch-pipedelay-1 = <0x2>; + xlnx,synch-pipedelay-2 = <0x2>; + xlnx,synch-pipedelay-3 = <0x2>; + xlnx,tavdv-ps-mem-0 = <0x1adb0>; + xlnx,tavdv-ps-mem-1 = <0x3a98>; + xlnx,tavdv-ps-mem-2 = <0x3a98>; + xlnx,tavdv-ps-mem-3 = <0x3a98>; + xlnx,tcedv-ps-mem-0 = <0x1adb0>; + xlnx,tcedv-ps-mem-1 = <0x3a98>; + xlnx,tcedv-ps-mem-2 = <0x3a98>; + xlnx,tcedv-ps-mem-3 = <0x3a98>; + xlnx,thzce-ps-mem-0 = <0x88b8>; + xlnx,thzce-ps-mem-1 = <0x1b58>; + xlnx,thzce-ps-mem-2 = <0x1b58>; + xlnx,thzce-ps-mem-3 = <0x1b58>; + xlnx,thzoe-ps-mem-0 = <0x1b58>; + xlnx,thzoe-ps-mem-1 = <0x1b58>; + xlnx,thzoe-ps-mem-2 = <0x1b58>; + xlnx,thzoe-ps-mem-3 = <0x1b58>; + xlnx,tlzwe-ps-mem-0 = <0x88b8>; + xlnx,tlzwe-ps-mem-1 = <0x0>; + xlnx,tlzwe-ps-mem-2 = <0x0>; + xlnx,tlzwe-ps-mem-3 = <0x0>; + xlnx,twc-ps-mem-0 = <0x2af8>; + xlnx,twc-ps-mem-1 = <0x3a98>; + xlnx,twc-ps-mem-2 = <0x3a98>; + xlnx,twc-ps-mem-3 = <0x3a98>; + xlnx,twp-ps-mem-0 = <0x11170>; + xlnx,twp-ps-mem-1 = <0x2ee0>; + xlnx,twp-ps-mem-2 = <0x2ee0>; + xlnx,twp-ps-mem-3 = <0x2ee0>; + xlnx,xcl0-linesize = <0x4>; + xlnx,xcl0-writexfer = <0x1>; + xlnx,xcl1-linesize = <0x4>; + xlnx,xcl1-writexfer = <0x1>; + xlnx,xcl2-linesize = <0x4>; + xlnx,xcl2-writexfer = <0x1>; + xlnx,xcl3-linesize = <0x4>; + xlnx,xcl3-writexfer = <0x1>; + } ; + Hard_Ethernet_MAC: xps-ll-temac@81c00000 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "xlnx,compound"; + ethernet@81c00000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "xlnx,xps-ll-temac-1.01.b"; + device_type = "network"; + interrupt-parent = <&xps_intc_0>; + interrupts = < 5 2 >; + llink-connected = <&DMA0>; + local-mac-address = [ 02 00 00 00 00 00 ]; + reg = < 0x81c00000 0x40 >; + xlnx,bus2core-clk-ratio = <1>; + xlnx,phy-type = <1>; + xlnx,phyaddr = <1>; + xlnx,rxcsum = <1>; + xlnx,rxfifo = <0x1000>; + xlnx,temac-type = <0>; + xlnx,txcsum = <1>; + xlnx,txfifo = <0x1000>; + phy-handle = <&phy7>; + clock-frequency = <100000000>; + phy7: phy@7 { + compatible = "marvell,88e1111"; + reg = <7>; + } ; + } ; + } ; + IIC_EEPROM: i2c@81600000 { + compatible = "xlnx,xps-iic-2.00.a"; + interrupt-parent = <&xps_intc_0>; + interrupts = < 6 2 >; + reg = < 0x81600000 0x10000 >; + xlnx,clk-freq = <0x5f5e100>; + xlnx,family = "virtex5"; + xlnx,gpo-width = <0x1>; + xlnx,iic-freq = <0x186a0>; + xlnx,scl-inertial-delay = <0x0>; + xlnx,sda-inertial-delay = <0x0>; + xlnx,ten-bit-adr = <0x0>; + } ; + LEDs_8Bit: gpio@81400000 { + compatible = "xlnx,xps-gpio-1.00.a"; + reg = < 0x81400000 0x10000 >; + xlnx,all-inputs = <0>; + xlnx,all-inputs-2 = <0>; + xlnx,dout-default = <0>; + xlnx,dout-default-2 = <0>; + xlnx,family = "virtex5"; + xlnx,gpio-width = <8>; + xlnx,interrupt-present = <0>; + xlnx,is-bidir = <1>; + xlnx,is-bidir-2 = <1>; + xlnx,is-dual = <0>; + xlnx,tri-default = <0xffffffff>; + xlnx,tri-default-2 = <0xffffffff>; + } ; + LEDs_Positions: gpio@81420000 { + compatible = "xlnx,xps-gpio-1.00.a"; + reg = < 0x81420000 0x10000 >; + xlnx,all-inputs = <0>; + xlnx,all-inputs-2 = <0>; + xlnx,dout-default = <0>; + xlnx,dout-default-2 = <0>; + xlnx,family = "virtex5"; + xlnx,gpio-width = <5>; + xlnx,interrupt-present = <0>; + xlnx,is-bidir = <1>; + xlnx,is-bidir-2 = <1>; + xlnx,is-dual = <0>; + xlnx,tri-default = <0xffffffff>; + xlnx,tri-default-2 = <0xffffffff>; + } ; + Push_Buttons_5Bit: gpio@81440000 { + compatible = "xlnx,xps-gpio-1.00.a"; + interrupt-parent = <&xps_intc_0>; + interrupts = < 8 2 >; + reg = < 0x81440000 0x10000 >; + xlnx,all-inputs = <1>; + xlnx,all-inputs-2 = <0>; + xlnx,dout-default = <0>; + xlnx,dout-default-2 = <0>; + xlnx,family = "virtex5"; + xlnx,gpio-width = <5>; + xlnx,interrupt-present = <1>; + xlnx,is-bidir = <1>; + xlnx,is-bidir-2 = <1>; + xlnx,is-dual = <0>; + xlnx,tri-default = <0xffffffff>; + xlnx,tri-default-2 = <0xffffffff>; + } ; + RS232_Uart_1: serial@83e00000 { + clock-frequency = <100000000>; + compatible = "xlnx,xps-uart16550-2.00.b", "ns16550"; + current-speed = <9600>; + device_type = "serial"; + interrupt-parent = <&xps_intc_0>; + interrupts = < 9 2 >; + reg = < 0x83e00000 0x10000 >; + reg-offset = <0x1003>; + reg-shift = <2>; + xlnx,family = "virtex5"; + xlnx,has-external-rclk = <0>; + xlnx,has-external-xin = <0>; + xlnx,is-a-16550 = <1>; + } ; + SysACE_CompactFlash: sysace@83600000 { + compatible = "xlnx,xps-sysace-1.00.a"; + interrupt-parent = <&xps_intc_0>; + interrupts = < 4 2 >; + reg = < 0x83600000 0x10000 >; + xlnx,family = "virtex5"; + xlnx,mem-width = <0x10>; + } ; + xps_bram_if_cntlr_1: xps-bram-if-cntlr@ffff0000 { + compatible = "xlnx,xps-bram-if-cntlr-1.00.a"; + reg = < 0xffff0000 0x10000 >; + xlnx,family = "virtex5"; + } ; + xps_intc_0: interrupt-controller@81800000 { + #interrupt-cells = <2>; + compatible = "xlnx,xps-intc-1.00.a"; + interrupt-controller ; + reg = < 0x81800000 0x10000 >; + xlnx,num-intr-inputs = <0xc>; + } ; + xps_timebase_wdt_1: xps-timebase-wdt@83a00000 { + compatible = "xlnx,xps-timebase-wdt-1.00.b"; + interrupt-parent = <&xps_intc_0>; + interrupts = < 2 0 1 2 >; + reg = < 0x83a00000 0x10000 >; + xlnx,family = "virtex5"; + xlnx,wdt-enable-once = <0>; + xlnx,wdt-interval = <0x1e>; + } ; + xps_timer_1: timer@83c00000 { + compatible = "xlnx,xps-timer-1.00.a"; + interrupt-parent = <&xps_intc_0>; + interrupts = < 3 2 >; + reg = < 0x83c00000 0x10000 >; + xlnx,count-width = <0x20>; + xlnx,family = "virtex5"; + xlnx,gen0-assert = <1>; + xlnx,gen1-assert = <1>; + xlnx,one-timer-only = <1>; + xlnx,trig0-assert = <1>; + xlnx,trig1-assert = <1>; + } ; + } ; +} ; diff --git a/arch/powerpc/boot/dts/virtex440-ml510.dts b/arch/powerpc/boot/dts/virtex440-ml510.dts new file mode 100644 index 000000000..81a8dc2c6 --- /dev/null +++ b/arch/powerpc/boot/dts/virtex440-ml510.dts @@ -0,0 +1,465 @@ +/* + * Xilinx ML510 Reference Design support + * + * This DTS file was created for the ml510_bsb1_pcores_ppc440 reference design. + * The reference design contains a bug which prevent PCI DMA from working + * properly. A description of the bug is given in the plbv46_pci section. It + * needs to be fixed by the user until Xilinx updates their reference design. + * + * Copyright 2009, Roderick Colenbrander + */ + +/dts-v1/; +/ { + #address-cells = <1>; + #size-cells = <1>; + compatible = "xlnx,ml510-ref-design", "xlnx,virtex440"; + dcr-parent = <&ppc440_0>; + DDR2_SDRAM_DIMM0: memory@0 { + device_type = "memory"; + reg = < 0x0 0x20000000 >; + } ; + alias { + ethernet0 = &Hard_Ethernet_MAC; + serial0 = &RS232_Uart_1; + } ; + chosen { + bootargs = "console=ttyS0 root=/dev/ram"; + linux,stdout-path = "/plb@0/serial@83e00000"; + } ; + cpus { + #address-cells = <1>; + #cpus = <0x1>; + #size-cells = <0>; + ppc440_0: cpu@0 { + #address-cells = <1>; + #size-cells = <1>; + clock-frequency = <300000000>; + compatible = "PowerPC,440", "ibm,ppc440"; + d-cache-line-size = <0x20>; + d-cache-size = <0x8000>; + dcr-access-method = "native"; + dcr-controller ; + device_type = "cpu"; + i-cache-line-size = <0x20>; + i-cache-size = <0x8000>; + model = "PowerPC,440"; + reg = <0>; + timebase-frequency = <300000000>; + xlnx,apu-control = <0x2000>; + xlnx,apu-udi-0 = <0x0>; + xlnx,apu-udi-1 = <0x0>; + xlnx,apu-udi-10 = <0x0>; + xlnx,apu-udi-11 = <0x0>; + xlnx,apu-udi-12 = <0x0>; + xlnx,apu-udi-13 = <0x0>; + xlnx,apu-udi-14 = <0x0>; + xlnx,apu-udi-15 = <0x0>; + xlnx,apu-udi-2 = <0x0>; + xlnx,apu-udi-3 = <0x0>; + xlnx,apu-udi-4 = <0x0>; + xlnx,apu-udi-5 = <0x0>; + xlnx,apu-udi-6 = <0x0>; + xlnx,apu-udi-7 = <0x0>; + xlnx,apu-udi-8 = <0x0>; + xlnx,apu-udi-9 = <0x0>; + xlnx,dcr-autolock-enable = <0x1>; + xlnx,dcu-rd-ld-cache-plb-prio = <0x0>; + xlnx,dcu-rd-noncache-plb-prio = <0x0>; + xlnx,dcu-rd-touch-plb-prio = <0x0>; + xlnx,dcu-rd-urgent-plb-prio = <0x0>; + xlnx,dcu-wr-flush-plb-prio = <0x0>; + xlnx,dcu-wr-store-plb-prio = <0x0>; + xlnx,dcu-wr-urgent-plb-prio = <0x0>; + xlnx,dma0-control = <0x0>; + xlnx,dma0-plb-prio = <0x0>; + xlnx,dma0-rxchannelctrl = <0x1010000>; + xlnx,dma0-rxirqtimer = <0x3ff>; + xlnx,dma0-txchannelctrl = <0x1010000>; + xlnx,dma0-txirqtimer = <0x3ff>; + xlnx,dma1-control = <0x0>; + xlnx,dma1-plb-prio = <0x0>; + xlnx,dma1-rxchannelctrl = <0x1010000>; + xlnx,dma1-rxirqtimer = <0x3ff>; + xlnx,dma1-txchannelctrl = <0x1010000>; + xlnx,dma1-txirqtimer = <0x3ff>; + xlnx,dma2-control = <0x0>; + xlnx,dma2-plb-prio = <0x0>; + xlnx,dma2-rxchannelctrl = <0x1010000>; + xlnx,dma2-rxirqtimer = <0x3ff>; + xlnx,dma2-txchannelctrl = <0x1010000>; + xlnx,dma2-txirqtimer = <0x3ff>; + xlnx,dma3-control = <0x0>; + xlnx,dma3-plb-prio = <0x0>; + xlnx,dma3-rxchannelctrl = <0x1010000>; + xlnx,dma3-rxirqtimer = <0x3ff>; + xlnx,dma3-txchannelctrl = <0x1010000>; + xlnx,dma3-txirqtimer = <0x3ff>; + xlnx,endian-reset = <0x0>; + xlnx,generate-plb-timespecs = <0x1>; + xlnx,icu-rd-fetch-plb-prio = <0x0>; + xlnx,icu-rd-spec-plb-prio = <0x0>; + xlnx,icu-rd-touch-plb-prio = <0x0>; + xlnx,interconnect-imask = <0xffffffff>; + xlnx,mplb-allow-lock-xfer = <0x1>; + xlnx,mplb-arb-mode = <0x0>; + xlnx,mplb-awidth = <0x20>; + xlnx,mplb-counter = <0x500>; + xlnx,mplb-dwidth = <0x80>; + xlnx,mplb-max-burst = <0x8>; + xlnx,mplb-native-dwidth = <0x80>; + xlnx,mplb-p2p = <0x0>; + xlnx,mplb-prio-dcur = <0x2>; + xlnx,mplb-prio-dcuw = <0x3>; + xlnx,mplb-prio-icu = <0x4>; + xlnx,mplb-prio-splb0 = <0x1>; + xlnx,mplb-prio-splb1 = <0x0>; + xlnx,mplb-read-pipe-enable = <0x1>; + xlnx,mplb-sync-tattribute = <0x0>; + xlnx,mplb-wdog-enable = <0x1>; + xlnx,mplb-write-pipe-enable = <0x1>; + xlnx,mplb-write-post-enable = <0x1>; + xlnx,num-dma = <0x0>; + xlnx,pir = <0xf>; + xlnx,ppc440mc-addr-base = <0x0>; + xlnx,ppc440mc-addr-high = <0x1fffffff>; + xlnx,ppc440mc-arb-mode = <0x0>; + xlnx,ppc440mc-bank-conflict-mask = <0x1800000>; + xlnx,ppc440mc-control = <0xf810008f>; + xlnx,ppc440mc-max-burst = <0x8>; + xlnx,ppc440mc-prio-dcur = <0x2>; + xlnx,ppc440mc-prio-dcuw = <0x3>; + xlnx,ppc440mc-prio-icu = <0x4>; + xlnx,ppc440mc-prio-splb0 = <0x1>; + xlnx,ppc440mc-prio-splb1 = <0x0>; + xlnx,ppc440mc-row-conflict-mask = <0x7ffe00>; + xlnx,ppcdm-asyncmode = <0x0>; + xlnx,ppcds-asyncmode = <0x0>; + xlnx,user-reset = <0x0>; + } ; + } ; + plb_v46_0: plb@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "xlnx,plb-v46-1.03.a", "simple-bus"; + ranges ; + FLASH: flash@fc000000 { + bank-width = <2>; + compatible = "xlnx,xps-mch-emc-2.00.a", "cfi-flash"; + reg = < 0xfc000000 0x2000000 >; + xlnx,family = "virtex5"; + xlnx,include-datawidth-matching-0 = <0x1>; + xlnx,include-datawidth-matching-1 = <0x0>; + xlnx,include-datawidth-matching-2 = <0x0>; + xlnx,include-datawidth-matching-3 = <0x0>; + xlnx,include-negedge-ioregs = <0x0>; + xlnx,include-plb-ipif = <0x1>; + xlnx,include-wrbuf = <0x1>; + xlnx,max-mem-width = <0x10>; + xlnx,mch-native-dwidth = <0x20>; + xlnx,mch-plb-clk-period-ps = <0x2710>; + xlnx,mch-splb-awidth = <0x20>; + xlnx,mch0-accessbuf-depth = <0x10>; + xlnx,mch0-protocol = <0x0>; + xlnx,mch0-rddatabuf-depth = <0x10>; + xlnx,mch1-accessbuf-depth = <0x10>; + xlnx,mch1-protocol = <0x0>; + xlnx,mch1-rddatabuf-depth = <0x10>; + xlnx,mch2-accessbuf-depth = <0x10>; + xlnx,mch2-protocol = <0x0>; + xlnx,mch2-rddatabuf-depth = <0x10>; + xlnx,mch3-accessbuf-depth = <0x10>; + xlnx,mch3-protocol = <0x0>; + xlnx,mch3-rddatabuf-depth = <0x10>; + xlnx,mem0-width = <0x10>; + xlnx,mem1-width = <0x20>; + xlnx,mem2-width = <0x20>; + xlnx,mem3-width = <0x20>; + xlnx,num-banks-mem = <0x1>; + xlnx,num-channels = <0x2>; + xlnx,priority-mode = <0x0>; + xlnx,synch-mem-0 = <0x0>; + xlnx,synch-mem-1 = <0x0>; + xlnx,synch-mem-2 = <0x0>; + xlnx,synch-mem-3 = <0x0>; + xlnx,synch-pipedelay-0 = <0x2>; + xlnx,synch-pipedelay-1 = <0x2>; + xlnx,synch-pipedelay-2 = <0x2>; + xlnx,synch-pipedelay-3 = <0x2>; + xlnx,tavdv-ps-mem-0 = <0x1adb0>; + xlnx,tavdv-ps-mem-1 = <0x3a98>; + xlnx,tavdv-ps-mem-2 = <0x3a98>; + xlnx,tavdv-ps-mem-3 = <0x3a98>; + xlnx,tcedv-ps-mem-0 = <0x1adb0>; + xlnx,tcedv-ps-mem-1 = <0x3a98>; + xlnx,tcedv-ps-mem-2 = <0x3a98>; + xlnx,tcedv-ps-mem-3 = <0x3a98>; + xlnx,thzce-ps-mem-0 = <0x88b8>; + xlnx,thzce-ps-mem-1 = <0x1b58>; + xlnx,thzce-ps-mem-2 = <0x1b58>; + xlnx,thzce-ps-mem-3 = <0x1b58>; + xlnx,thzoe-ps-mem-0 = <0x1b58>; + xlnx,thzoe-ps-mem-1 = <0x1b58>; + xlnx,thzoe-ps-mem-2 = <0x1b58>; + xlnx,thzoe-ps-mem-3 = <0x1b58>; + xlnx,tlzwe-ps-mem-0 = <0x88b8>; + xlnx,tlzwe-ps-mem-1 = <0x0>; + xlnx,tlzwe-ps-mem-2 = <0x0>; + xlnx,tlzwe-ps-mem-3 = <0x0>; + xlnx,twc-ps-mem-0 = <0x1adb0>; + xlnx,twc-ps-mem-1 = <0x3a98>; + xlnx,twc-ps-mem-2 = <0x3a98>; + xlnx,twc-ps-mem-3 = <0x3a98>; + xlnx,twp-ps-mem-0 = <0x11170>; + xlnx,twp-ps-mem-1 = <0x2ee0>; + xlnx,twp-ps-mem-2 = <0x2ee0>; + xlnx,twp-ps-mem-3 = <0x2ee0>; + xlnx,xcl0-linesize = <0x4>; + xlnx,xcl0-writexfer = <0x1>; + xlnx,xcl1-linesize = <0x4>; + xlnx,xcl1-writexfer = <0x1>; + xlnx,xcl2-linesize = <0x4>; + xlnx,xcl2-writexfer = <0x1>; + xlnx,xcl3-linesize = <0x4>; + xlnx,xcl3-writexfer = <0x1>; + } ; + Hard_Ethernet_MAC: xps-ll-temac@81c00000 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "xlnx,compound"; + ethernet@81c00000 { + compatible = "xlnx,xps-ll-temac-1.01.b"; + device_type = "network"; + interrupt-parent = <&xps_intc_0>; + interrupts = < 8 2 >; + llink-connected = <&Hard_Ethernet_MAC_fifo>; + local-mac-address = [ 02 00 00 00 00 00 ]; + reg = < 0x81c00000 0x40 >; + xlnx,bus2core-clk-ratio = <0x1>; + xlnx,phy-type = <0x3>; + xlnx,phyaddr = <0x1>; + xlnx,rxcsum = <0x0>; + xlnx,rxfifo = <0x8000>; + xlnx,temac-type = <0x0>; + xlnx,txcsum = <0x0>; + xlnx,txfifo = <0x8000>; + } ; + } ; + Hard_Ethernet_MAC_fifo: xps-ll-fifo@81a00000 { + compatible = "xlnx,xps-ll-fifo-1.01.a"; + interrupt-parent = <&xps_intc_0>; + interrupts = < 6 2 >; + reg = < 0x81a00000 0x10000 >; + xlnx,family = "virtex5"; + } ; + IIC_EEPROM: i2c@81600000 { + compatible = "xlnx,xps-iic-2.00.a"; + interrupt-parent = <&xps_intc_0>; + interrupts = < 9 2 >; + reg = < 0x81600000 0x10000 >; + xlnx,clk-freq = <0x5f5e100>; + xlnx,family = "virtex5"; + xlnx,gpo-width = <0x1>; + xlnx,iic-freq = <0x186a0>; + xlnx,scl-inertial-delay = <0x5>; + xlnx,sda-inertial-delay = <0x5>; + xlnx,ten-bit-adr = <0x0>; + } ; + LCD_OPTIONAL: gpio@81420000 { + compatible = "xlnx,xps-gpio-1.00.a"; + reg = < 0x81420000 0x10000 >; + xlnx,all-inputs = <0x0>; + xlnx,all-inputs-2 = <0x0>; + xlnx,dout-default = <0x0>; + xlnx,dout-default-2 = <0x0>; + xlnx,family = "virtex5"; + xlnx,gpio-width = <0xb>; + xlnx,interrupt-present = <0x0>; + xlnx,is-bidir = <0x1>; + xlnx,is-bidir-2 = <0x1>; + xlnx,is-dual = <0x0>; + xlnx,tri-default = <0xffffffff>; + xlnx,tri-default-2 = <0xffffffff>; + } ; + LEDs_4Bit: gpio@81400000 { + compatible = "xlnx,xps-gpio-1.00.a"; + reg = < 0x81400000 0x10000 >; + xlnx,all-inputs = <0x0>; + xlnx,all-inputs-2 = <0x0>; + xlnx,dout-default = <0x0>; + xlnx,dout-default-2 = <0x0>; + xlnx,family = "virtex5"; + xlnx,gpio-width = <0x4>; + xlnx,interrupt-present = <0x0>; + xlnx,is-bidir = <0x1>; + xlnx,is-bidir-2 = <0x1>; + xlnx,is-dual = <0x0>; + xlnx,tri-default = <0xffffffff>; + xlnx,tri-default-2 = <0xffffffff>; + } ; + RS232_Uart_1: serial@83e00000 { + clock-frequency = <100000000>; + compatible = "xlnx,xps-uart16550-2.00.b", "ns16550"; + current-speed = <9600>; + device_type = "serial"; + interrupt-parent = <&xps_intc_0>; + interrupts = < 11 2 >; + reg = < 0x83e00000 0x10000 >; + reg-offset = <0x1003>; + reg-shift = <2>; + xlnx,family = "virtex5"; + xlnx,has-external-rclk = <0x0>; + xlnx,has-external-xin = <0x0>; + xlnx,is-a-16550 = <0x1>; + } ; + SPI_EEPROM: xps-spi@feff8000 { + compatible = "xlnx,xps-spi-2.00.b"; + interrupt-parent = <&xps_intc_0>; + interrupts = < 10 2 >; + reg = < 0xfeff8000 0x80 >; + xlnx,family = "virtex5"; + xlnx,fifo-exist = <0x1>; + xlnx,num-ss-bits = <0x1>; + xlnx,num-transfer-bits = <0x8>; + xlnx,sck-ratio = <0x80>; + } ; + SysACE_CompactFlash: sysace@83600000 { + compatible = "xlnx,xps-sysace-1.00.a"; + interrupt-parent = <&xps_intc_0>; + interrupts = < 7 2 >; + reg = < 0x83600000 0x10000 >; + xlnx,family = "virtex5"; + xlnx,mem-width = <0x10>; + } ; + plbv46_pci_0: plbv46-pci@85e00000 { + #size-cells = <2>; + #address-cells = <3>; + compatible = "xlnx,plbv46-pci-1.03.a"; + device_type = "pci"; + reg = < 0x85e00000 0x10000 >; + + /* + * The default ML510 BSB has C_IPIFBAR2PCIBAR_0 set to + * 0 which means that a read/write to the memory mapped + * i/o region (which starts at 0xa0000000) for pci + * bar 0 on the plb side translates to 0. + * It is important to set this value to 0xa0000000, so + * that inbound and outbound pci transactions work + * properly including DMA. + */ + ranges = <0x02000000 0 0xa0000000 0xa0000000 0 0x20000000 + 0x01000000 0 0x00000000 0xf0000000 0 0x00010000>; + + #interrupt-cells = <1>; + interrupt-parent = <&xps_intc_0>; + interrupt-map-mask = <0xff00 0x0 0x0 0x7>; + interrupt-map = < + /* IRQ mapping for pci slots and ALI M1533 + * periperhals. In total there are 5 interrupt + * lines connected to a xps_intc controller. + * Four of them are PCI IRQ A, B, C, D and + * which correspond to respectively xpx_intc + * 5, 4, 3 and 2. The fifth interrupt line is + * connected to the south bridge and this one + * uses irq 1 and is active high instead of + * active low. + * + * The M1533 contains various peripherals + * including AC97 audio, a modem, USB, IDE and + * some power management stuff. The modem + * isn't connected on the ML510 and the power + * management core also isn't used. + */ + + /* IDSEL 0x16 / dev=6, bus=0 / PCI slot 3 */ + 0x3000 0 0 1 &xps_intc_0 3 2 + 0x3000 0 0 2 &xps_intc_0 2 2 + 0x3000 0 0 3 &xps_intc_0 5 2 + 0x3000 0 0 4 &xps_intc_0 4 2 + + /* IDSEL 0x13 / dev=3, bus=1 / PCI slot 4 */ + /* + 0x11800 0 0 1 &xps_intc_0 5 0 2 + 0x11800 0 0 2 &xps_intc_0 4 0 2 + 0x11800 0 0 3 &xps_intc_0 3 0 2 + 0x11800 0 0 4 &xps_intc_0 2 0 2 + */ + + /* According to the datasheet + schematic + * ABCD [FPGA] of slot 5 is mapped to DABC. + * Testing showed that at least A maps to B, + * the mapping of the other pins is a guess + * and for that reason the lines have been + * commented out. + */ + /* IDSEL 0x15 / dev=5, bus=0 / PCI slot 5 */ + 0x2800 0 0 1 &xps_intc_0 4 2 + /* + 0x2800 0 0 2 &xps_intc_0 3 2 + 0x2800 0 0 3 &xps_intc_0 2 2 + 0x2800 0 0 4 &xps_intc_0 5 2 + */ + + /* IDSEL 0x12 / dev=2, bus=1 / PCI slot 6 */ + /* + 0x11000 0 0 1 &xps_intc_0 4 0 2 + 0x11000 0 0 2 &xps_intc_0 3 0 2 + 0x11000 0 0 3 &xps_intc_0 2 0 2 + 0x11000 0 0 4 &xps_intc_0 5 0 2 + */ + + /* IDSEL 0x11 / dev=1, bus=0 / AC97 audio */ + 0x0800 0 0 1 &i8259 7 2 + + /* IDSEL 0x1b / dev=11, bus=0 / IDE */ + 0x5800 0 0 1 &i8259 14 2 + + /* IDSEL 0x1f / dev 15, bus=0 / 2x USB 1.1 */ + 0x7800 0 0 1 &i8259 7 2 + >; + ali_m1533 { + #size-cells = <1>; + #address-cells = <2>; + i8259: interrupt-controller@20 { + reg = <1 0x20 2 + 1 0xa0 2 + 1 0x4d0 2>; + interrupt-controller; + device_type = "interrupt-controller"; + #address-cells = <0>; + #interrupt-cells = <2>; + compatible = "chrp,iic"; + + /* south bridge irq is active high */ + interrupts = <1 3>; + interrupt-parent = <&xps_intc_0>; + }; + }; + } ; + xps_bram_if_cntlr_1: xps-bram-if-cntlr@ffff0000 { + compatible = "xlnx,xps-bram-if-cntlr-1.00.a"; + reg = < 0xffff0000 0x10000 >; + xlnx,family = "virtex5"; + } ; + xps_intc_0: interrupt-controller@81800000 { + #interrupt-cells = <0x2>; + compatible = "xlnx,xps-intc-1.00.a"; + interrupt-controller ; + reg = < 0x81800000 0x10000 >; + xlnx,num-intr-inputs = <0xc>; + } ; + xps_tft_0: tft@86e00000 { + compatible = "xlnx,xps-tft-1.00.a"; + reg = < 0x86e00000 0x10000 >; + xlnx,dcr-splb-slave-if = <0x1>; + xlnx,default-tft-base-addr = <0x0>; + xlnx,family = "virtex5"; + xlnx,i2c-slave-addr = <0x76>; + xlnx,mplb-awidth = <0x20>; + xlnx,mplb-dwidth = <0x80>; + xlnx,mplb-native-dwidth = <0x40>; + xlnx,mplb-smallest-slave = <0x20>; + xlnx,tft-interface = <0x1>; + } ; + } ; +} ; diff --git a/arch/powerpc/boot/dts/walnut.dts b/arch/powerpc/boot/dts/walnut.dts new file mode 100644 index 000000000..4a9f726ad --- /dev/null +++ b/arch/powerpc/boot/dts/walnut.dts @@ -0,0 +1,246 @@ +/* + * Device Tree Source for IBM Walnut + * + * Copyright 2007 IBM Corp. + * Josh Boyer <jwboyer@linux.vnet.ibm.com> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without + * any warranty of any kind, whether express or implied. + */ + +/dts-v1/; + +/ { + #address-cells = <1>; + #size-cells = <1>; + model = "ibm,walnut"; + compatible = "ibm,walnut"; + dcr-parent = <&{/cpus/cpu@0}>; + + aliases { + ethernet0 = &EMAC; + serial0 = &UART0; + serial1 = &UART1; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu@0 { + device_type = "cpu"; + model = "PowerPC,405GP"; + reg = <0x00000000>; + clock-frequency = <200000000>; /* Filled in by zImage */ + timebase-frequency = <0>; /* Filled in by zImage */ + i-cache-line-size = <32>; + d-cache-line-size = <32>; + i-cache-size = <16384>; + d-cache-size = <16384>; + dcr-controller; + dcr-access-method = "native"; + }; + }; + + memory { + device_type = "memory"; + reg = <0x00000000 0x00000000>; /* Filled in by zImage */ + }; + + UIC0: interrupt-controller { + compatible = "ibm,uic"; + interrupt-controller; + cell-index = <0>; + dcr-reg = <0x0c0 0x009>; + #address-cells = <0>; + #size-cells = <0>; + #interrupt-cells = <2>; + }; + + plb { + compatible = "ibm,plb3"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + clock-frequency = <0>; /* Filled in by zImage */ + + SDRAM0: memory-controller { + compatible = "ibm,sdram-405gp"; + dcr-reg = <0x010 0x002>; + }; + + MAL: mcmal { + compatible = "ibm,mcmal-405gp", "ibm,mcmal"; + dcr-reg = <0x180 0x062>; + num-tx-chans = <1>; + num-rx-chans = <1>; + interrupt-parent = <&UIC0>; + interrupts = < + 0xb 0x4 /* TXEOB */ + 0xc 0x4 /* RXEOB */ + 0xa 0x4 /* SERR */ + 0xd 0x4 /* TXDE */ + 0xe 0x4 /* RXDE */>; + }; + + POB0: opb { + compatible = "ibm,opb-405gp", "ibm,opb"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0xef600000 0xef600000 0x00a00000>; + dcr-reg = <0x0a0 0x005>; + clock-frequency = <0>; /* Filled in by zImage */ + + UART0: serial@ef600300 { + device_type = "serial"; + compatible = "ns16550"; + reg = <0xef600300 0x00000008>; + virtual-reg = <0xef600300>; + clock-frequency = <0>; /* Filled in by zImage */ + current-speed = <9600>; + interrupt-parent = <&UIC0>; + interrupts = <0x0 0x4>; + }; + + UART1: serial@ef600400 { + device_type = "serial"; + compatible = "ns16550"; + reg = <0xef600400 0x00000008>; + virtual-reg = <0xef600400>; + clock-frequency = <0>; /* Filled in by zImage */ + current-speed = <9600>; + interrupt-parent = <&UIC0>; + interrupts = <0x1 0x4>; + }; + + IIC: i2c@ef600500 { + compatible = "ibm,iic-405gp", "ibm,iic"; + reg = <0xef600500 0x00000011>; + interrupt-parent = <&UIC0>; + interrupts = <0x2 0x4>; + }; + + GPIO: gpio@ef600700 { + compatible = "ibm,gpio-405gp"; + reg = <0xef600700 0x00000020>; + }; + + EMAC: ethernet@ef600800 { + device_type = "network"; + compatible = "ibm,emac-405gp", "ibm,emac"; + interrupt-parent = <&UIC0>; + interrupts = < + 0xf 0x4 /* Ethernet */ + 0x9 0x4 /* Ethernet Wake Up */>; + local-mac-address = [000000000000]; /* Filled in by zImage */ + reg = <0xef600800 0x00000070>; + mal-device = <&MAL>; + mal-tx-channel = <0>; + mal-rx-channel = <0>; + cell-index = <0>; + max-frame-size = <1500>; + rx-fifo-size = <4096>; + tx-fifo-size = <2048>; + phy-mode = "rmii"; + phy-map = <0x00000001>; + }; + + }; + + EBC0: ebc { + compatible = "ibm,ebc-405gp", "ibm,ebc"; + dcr-reg = <0x012 0x002>; + #address-cells = <2>; + #size-cells = <1>; + /* The ranges property is supplied by the bootwrapper + * and is based on the firmware's configuration of the + * EBC bridge + */ + clock-frequency = <0>; /* Filled in by zImage */ + + sram@0,0 { + reg = <0x00000000 0x00000000 0x00080000>; + }; + + flash@0,80000 { + compatible = "jedec-flash"; + bank-width = <1>; + reg = <0x00000000 0x00080000 0x00080000>; + #address-cells = <1>; + #size-cells = <1>; + partition@0 { + label = "OpenBIOS"; + reg = <0x00000000 0x00080000>; + read-only; + }; + }; + + nvram@1,0 { + /* NVRAM and RTC */ + compatible = "ds1743-nvram"; + #bytes = <0x2000>; + reg = <0x00000001 0x00000000 0x00002000>; + }; + + keyboard@2,0 { + compatible = "intel,82C42PC"; + reg = <0x00000002 0x00000000 0x00000002>; + }; + + ir@3,0 { + compatible = "ti,TIR2000PAG"; + reg = <0x00000003 0x00000000 0x00000010>; + }; + + fpga@7,0 { + compatible = "Walnut-FPGA"; + reg = <0x00000007 0x00000000 0x00000010>; + virtual-reg = <0xf0300005>; + }; + }; + + PCI0: pci@ec000000 { + device_type = "pci"; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + compatible = "ibm,plb405gp-pci", "ibm,plb-pci"; + primary; + reg = <0xeec00000 0x00000008 /* Config space access */ + 0xeed80000 0x00000004 /* IACK */ + 0xeed80000 0x00000004 /* Special cycle */ + 0xef480000 0x00000040>; /* Internal registers */ + + /* Outbound ranges, one memory and one IO, + * later cannot be changed. Chip supports a second + * IO range but we don't use it for now + */ + ranges = <0x02000000 0x00000000 0x80000000 0x80000000 0x00000000 0x20000000 + 0x01000000 0x00000000 0x00000000 0xe8000000 0x00000000 0x00010000>; + + /* Inbound 2GB range starting at 0 */ + dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x80000000>; + + /* Walnut has all 4 IRQ pins tied together per slot */ + interrupt-map-mask = <0xf800 0x0 0x0 0x0>; + interrupt-map = < + /* IDSEL 1 */ + 0x800 0x0 0x0 0x0 &UIC0 0x1c 0x8 + + /* IDSEL 2 */ + 0x1000 0x0 0x0 0x0 &UIC0 0x1d 0x8 + + /* IDSEL 3 */ + 0x1800 0x0 0x0 0x0 &UIC0 0x1e 0x8 + + /* IDSEL 4 */ + 0x2000 0x0 0x0 0x0 &UIC0 0x1f 0x8 + >; + }; + }; + + chosen { + linux,stdout-path = "/plb/opb/serial@ef600300"; + }; +}; diff --git a/arch/powerpc/boot/dts/warp.dts b/arch/powerpc/boot/dts/warp.dts new file mode 100644 index 000000000..e576ee85c --- /dev/null +++ b/arch/powerpc/boot/dts/warp.dts @@ -0,0 +1,309 @@ +/* + * Device Tree Source for PIKA Warp + * + * Copyright (c) 2008-2009 PIKA Technologies + * Sean MacLennan <smaclennan@pikatech.com> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without + * any warranty of any kind, whether express or implied. + */ + +/dts-v1/; + +/ { + #address-cells = <2>; + #size-cells = <1>; + model = "pika,warp"; + compatible = "pika,warp"; + dcr-parent = <&{/cpus/cpu@0}>; + + aliases { + ethernet0 = &EMAC0; + serial0 = &UART0; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu@0 { + device_type = "cpu"; + model = "PowerPC,440EP"; + reg = <0x00000000>; + clock-frequency = <0>; /* Filled in by zImage */ + timebase-frequency = <0>; /* Filled in by zImage */ + i-cache-line-size = <32>; + d-cache-line-size = <32>; + i-cache-size = <32768>; + d-cache-size = <32768>; + dcr-controller; + dcr-access-method = "native"; + }; + }; + + memory { + device_type = "memory"; + reg = <0x00000000 0x00000000 0x00000000>; /* Filled in by zImage */ + }; + + UIC0: interrupt-controller0 { + compatible = "ibm,uic-440ep","ibm,uic"; + interrupt-controller; + cell-index = <0>; + dcr-reg = <0x0c0 0x009>; + #address-cells = <0>; + #size-cells = <0>; + #interrupt-cells = <2>; + }; + + UIC1: interrupt-controller1 { + compatible = "ibm,uic-440ep","ibm,uic"; + interrupt-controller; + cell-index = <1>; + dcr-reg = <0x0d0 0x009>; + #address-cells = <0>; + #size-cells = <0>; + #interrupt-cells = <2>; + interrupts = <0x1e 0x4 0x1f 0x4>; /* cascade */ + interrupt-parent = <&UIC0>; + }; + + SDR0: sdr { + compatible = "ibm,sdr-440ep"; + dcr-reg = <0x00e 0x002>; + }; + + CPR0: cpr { + compatible = "ibm,cpr-440ep"; + dcr-reg = <0x00c 0x002>; + }; + + plb { + compatible = "ibm,plb-440ep", "ibm,plb-440gp", "ibm,plb4"; + #address-cells = <2>; + #size-cells = <1>; + ranges; + clock-frequency = <0>; /* Filled in by zImage */ + + SDRAM0: sdram { + compatible = "ibm,sdram-440ep", "ibm,sdram-405gp"; + dcr-reg = <0x010 0x002>; + }; + + DMA0: dma { + compatible = "ibm,dma-440ep", "ibm,dma-440gp"; + dcr-reg = <0x100 0x027>; + }; + + MAL0: mcmal { + compatible = "ibm,mcmal-440ep", "ibm,mcmal-440gp", "ibm,mcmal"; + dcr-reg = <0x180 0x062>; + num-tx-chans = <4>; + num-rx-chans = <2>; + interrupt-parent = <&MAL0>; + interrupts = <0x0 0x1 0x2 0x3 0x4>; + #interrupt-cells = <1>; + #address-cells = <0>; + #size-cells = <0>; + interrupt-map = </*TXEOB*/ 0x0 &UIC0 0xa 0x4 + /*RXEOB*/ 0x1 &UIC0 0xb 0x4 + /*SERR*/ 0x2 &UIC1 0x0 0x4 + /*TXDE*/ 0x3 &UIC1 0x1 0x4 + /*RXDE*/ 0x4 &UIC1 0x2 0x4>; + }; + + POB0: opb { + compatible = "ibm,opb-440ep", "ibm,opb-440gp", "ibm,opb"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x00000000 0x00000000 0x00000000 0x80000000 + 0x80000000 0x00000000 0x80000000 0x80000000>; + interrupt-parent = <&UIC1>; + interrupts = <0x7 0x4>; + clock-frequency = <0>; /* Filled in by zImage */ + + EBC0: ebc { + compatible = "ibm,ebc-440ep", "ibm,ebc-440gp", "ibm,ebc"; + dcr-reg = <0x012 0x002>; + #address-cells = <2>; + #size-cells = <1>; + clock-frequency = <0>; /* Filled in by zImage */ + interrupts = <0x5 0x1>; + interrupt-parent = <&UIC1>; + + fpga@2,0 { + compatible = "pika,fpga"; + reg = <0x00000002 0x00000000 0x00001000>; + interrupts = <0x18 0x8>; + interrupt-parent = <&UIC0>; + }; + + fpga@2,2000 { + compatible = "pika,fpga-sgl"; + reg = <0x00000002 0x00002000 0x00000200>; + }; + + fpga@2,4000 { + compatible = "pika,fpga-sd"; + reg = <0x00000002 0x00004000 0x00004000>; + }; + + nor@0,0 { + compatible = "amd,s29gl032a", "cfi-flash"; + bank-width = <2>; + reg = <0x00000000 0x00000000 0x00400000>; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "splash"; + reg = <0x00000000 0x00010000>; + }; + partition@300000 { + label = "fpga"; + reg = <0x0300000 0x00040000>; + }; + partition@340000 { + label = "env"; + reg = <0x0340000 0x00040000>; + }; + partition@380000 { + label = "u-boot"; + reg = <0x0380000 0x00080000>; + }; + }; + + ndfc@1,0 { + compatible = "ibm,ndfc"; + reg = <0x00000001 0x00000000 0x00002000>; + ccr = <0x00001000>; + bank-settings = <0x80002222>; + #address-cells = <1>; + #size-cells = <1>; + + nand { + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "kernel"; + reg = <0x00000000 0x00200000>; + }; + partition@200000 { + label = "root"; + reg = <0x00200000 0x03E00000>; + }; + partition@40000000 { + label = "persistent"; + reg = <0x04000000 0x04000000>; + }; + partition@80000000 { + label = "persistent1"; + reg = <0x08000000 0x04000000>; + }; + partition@C0000000 { + label = "persistent2"; + reg = <0x0C000000 0x04000000>; + }; + }; + }; + }; + + UART0: serial@ef600300 { + device_type = "serial"; + compatible = "ns16550"; + reg = <0xef600300 0x00000008>; + virtual-reg = <0xef600300>; + clock-frequency = <0>; /* Filled in by zImage */ + current-speed = <115200>; + interrupt-parent = <&UIC0>; + interrupts = <0x0 0x4>; + }; + + IIC0: i2c@ef600700 { + compatible = "ibm,iic-440ep", "ibm,iic-440gp", "ibm,iic"; + reg = <0xef600700 0x00000014>; + interrupt-parent = <&UIC0>; + interrupts = <0x2 0x4>; + #address-cells = <1>; + #size-cells = <0>; + + ad7414@4a { + compatible = "adi,ad7414"; + reg = <0x4a>; + interrupts = <0x19 0x8>; + interrupt-parent = <&UIC0>; + }; + + /* This will create 52 and 53 */ + at24@52 { + compatible = "at,24c04"; + reg = <0x52>; + }; + }; + + GPIO0: gpio@ef600b00 { + compatible = "ibm,ppc4xx-gpio"; + reg = <0xef600b00 0x00000048>; + #gpio-cells = <2>; + gpio-controller; + }; + + GPIO1: gpio@ef600c00 { + compatible = "ibm,ppc4xx-gpio"; + reg = <0xef600c00 0x00000048>; + #gpio-cells = <2>; + gpio-controller; + }; + + power-leds { + compatible = "gpio-leds"; + green { + gpios = <&GPIO1 0 0>; + default-state = "keep"; + }; + red { + gpios = <&GPIO1 1 0>; + default-state = "keep"; + }; + }; + + ZMII0: emac-zmii@ef600d00 { + compatible = "ibm,zmii-440ep", "ibm,zmii-440gp", "ibm,zmii"; + reg = <0xef600d00 0x0000000c>; + }; + + EMAC0: ethernet@ef600e00 { + device_type = "network"; + compatible = "ibm,emac-440ep", "ibm,emac-440gp", "ibm,emac"; + interrupt-parent = <&UIC1>; + interrupts = <0x1c 0x4 0x1d 0x4>; + reg = <0xef600e00 0x00000070>; + local-mac-address = [000000000000]; + mal-device = <&MAL0>; + mal-tx-channel = <0 1>; + mal-rx-channel = <0>; + cell-index = <0>; + max-frame-size = <1500>; + rx-fifo-size = <4096>; + tx-fifo-size = <2048>; + phy-mode = "rmii"; + phy-map = <0x00000000>; + zmii-device = <&ZMII0>; + zmii-channel = <0>; + }; + + usb@ef601000 { + compatible = "ohci-be"; + reg = <0xef601000 0x00000080>; + interrupts = <0x8 0x1 0x9 0x1>; + interrupt-parent = < &UIC1 >; + }; + }; + }; + + chosen { + linux,stdout-path = "/plb/opb/serial@ef600300"; + }; +}; diff --git a/arch/powerpc/boot/dts/wii.dts b/arch/powerpc/boot/dts/wii.dts new file mode 100644 index 000000000..77528c9a8 --- /dev/null +++ b/arch/powerpc/boot/dts/wii.dts @@ -0,0 +1,218 @@ +/* + * arch/powerpc/boot/dts/wii.dts + * + * Nintendo Wii platform device tree source + * Copyright (C) 2008-2009 The GameCube Linux Team + * Copyright (C) 2008,2009 Albert Herranz + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * + */ + +/dts-v1/; + +/* + * This is commented-out for now. + * Until a later patch is merged, the kernel can use only the first + * contiguous RAM range and will BUG() if the memreserve is outside + * that range. + */ +/*/memreserve/ 0x10000000 0x0004000;*/ /* DSP RAM */ + +/ { + model = "nintendo,wii"; + compatible = "nintendo,wii"; + #address-cells = <1>; + #size-cells = <1>; + + chosen { + bootargs = "root=/dev/mmcblk0p2 rootwait udbg-immortal"; + }; + + memory { + device_type = "memory"; + reg = <0x00000000 0x01800000 /* MEM1 24MB 1T-SRAM */ + 0x10000000 0x04000000>; /* MEM2 64MB GDDR3 */ + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + PowerPC,broadway@0 { + device_type = "cpu"; + reg = <0>; + clock-frequency = <729000000>; /* 729MHz */ + bus-frequency = <243000000>; /* 243MHz core-to-bus 3x */ + timebase-frequency = <60750000>; /* 243MHz / 4 */ + i-cache-line-size = <32>; + d-cache-line-size = <32>; + i-cache-size = <32768>; + d-cache-size = <32768>; + }; + }; + + /* devices contained in the hollywood chipset */ + hollywood { + #address-cells = <1>; + #size-cells = <1>; + compatible = "nintendo,hollywood"; + ranges = <0x0c000000 0x0c000000 0x01000000 + 0x0d000000 0x0d000000 0x00800000 + 0x0d800000 0x0d800000 0x00800000>; + interrupt-parent = <&PIC0>; + + video@0c002000 { + compatible = "nintendo,hollywood-vi", + "nintendo,flipper-vi"; + reg = <0x0c002000 0x100>; + interrupts = <8>; + }; + + processor-interface@0c003000 { + compatible = "nintendo,hollywood-pi", + "nintendo,flipper-pi"; + reg = <0x0c003000 0x100>; + + PIC0: pic0 { + #interrupt-cells = <1>; + compatible = "nintendo,flipper-pic"; + interrupt-controller; + }; + }; + + dsp@0c005000 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "nintendo,hollywood-dsp", + "nintendo,flipper-dsp"; + reg = <0x0c005000 0x200>; + interrupts = <6>; + }; + + gamepad-controller@0d006400 { + compatible = "nintendo,hollywood-si", + "nintendo,flipper-si"; + reg = <0x0d006400 0x100>; + interrupts = <3>; + }; + + audio@0c006c00 { + compatible = "nintendo,hollywood-ai", + "nintendo,flipper-ai"; + reg = <0x0d006c00 0x20>; + interrupts = <6>; + }; + + /* External Interface bus */ + exi@0d006800 { + compatible = "nintendo,hollywood-exi", + "nintendo,flipper-exi"; + reg = <0x0d006800 0x40>; + virtual-reg = <0x0d006800>; + interrupts = <4>; + }; + + usb@0d040000 { + compatible = "nintendo,hollywood-usb-ehci", + "usb-ehci"; + reg = <0x0d040000 0x100>; + interrupts = <4>; + interrupt-parent = <&PIC1>; + }; + + usb@0d050000 { + compatible = "nintendo,hollywood-usb-ohci", + "usb-ohci"; + reg = <0x0d050000 0x100>; + interrupts = <5>; + interrupt-parent = <&PIC1>; + }; + + usb@0d060000 { + compatible = "nintendo,hollywood-usb-ohci", + "usb-ohci"; + reg = <0x0d060000 0x100>; + interrupts = <6>; + interrupt-parent = <&PIC1>; + }; + + sd@0d070000 { + compatible = "nintendo,hollywood-sdhci", + "sdhci"; + reg = <0x0d070000 0x200>; + interrupts = <7>; + interrupt-parent = <&PIC1>; + }; + + sdio@0d080000 { + compatible = "nintendo,hollywood-sdhci", + "sdhci"; + reg = <0x0d080000 0x200>; + interrupts = <8>; + interrupt-parent = <&PIC1>; + }; + + ipc@0d000000 { + compatible = "nintendo,hollywood-ipc"; + reg = <0x0d000000 0x10>; + interrupts = <30>; + interrupt-parent = <&PIC1>; + }; + + PIC1: pic1@0d800030 { + #interrupt-cells = <1>; + compatible = "nintendo,hollywood-pic"; + reg = <0x0d800030 0x10>; + interrupt-controller; + interrupts = <14>; + }; + + GPIO: gpio@0d8000c0 { + #gpio-cells = <2>; + compatible = "nintendo,hollywood-gpio"; + reg = <0x0d8000c0 0x40>; + gpio-controller; + + /* + * This is commented out while a standard binding + * for i2c over gpio is defined. + */ + /* + i2c-video { + #address-cells = <1>; + #size-cells = <0>; + compatible = "i2c-gpio"; + + gpios = <&GPIO 15 0 + &GPIO 14 0>; + clock-frequency = <250000>; + no-clock-stretching; + scl-is-open-drain; + sda-is-open-drain; + sda-enforce-dir; + + AVE: audio-video-encoder@70 { + compatible = "nintendo,wii-audio-video-encoder"; + reg = <0x70>; + }; + }; + */ + }; + + control@0d800100 { + compatible = "nintendo,hollywood-control"; + reg = <0x0d800100 0x300>; + }; + + disk@0d806000 { + compatible = "nintendo,hollywood-di"; + reg = <0x0d806000 0x40>; + interrupts = <2>; + }; + }; +}; + diff --git a/arch/powerpc/boot/dts/xcalibur1501.dts b/arch/powerpc/boot/dts/xcalibur1501.dts new file mode 100644 index 000000000..c409cbafb --- /dev/null +++ b/arch/powerpc/boot/dts/xcalibur1501.dts @@ -0,0 +1,696 @@ +/* + * Copyright (C) 2008 Extreme Engineering Solutions, Inc. + * Based on MPC8572DS device tree from Freescale Semiconductor, Inc. + * + * XCalibur1501 6U CompactPCI single-board computer based on MPC8572E + * + * This is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +/dts-v1/; +/ { + model = "xes,xcalibur1501"; + compatible = "xes,xcalibur1501", "xes,MPC8572"; + #address-cells = <2>; + #size-cells = <2>; + + aliases { + ethernet0 = &enet0; + ethernet1 = &enet1; + ethernet2 = &enet2; + ethernet3 = &enet3; + serial0 = &serial0; + serial1 = &serial1; + pci2 = &pci2; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + PowerPC,8572@0 { + device_type = "cpu"; + reg = <0x0>; + d-cache-line-size = <32>; // 32 bytes + i-cache-line-size = <32>; // 32 bytes + d-cache-size = <0x8000>; // L1, 32K + i-cache-size = <0x8000>; // L1, 32K + timebase-frequency = <0>; + bus-frequency = <0>; + clock-frequency = <0>; + next-level-cache = <&L2>; + }; + + PowerPC,8572@1 { + device_type = "cpu"; + reg = <0x1>; + d-cache-line-size = <32>; // 32 bytes + i-cache-line-size = <32>; // 32 bytes + d-cache-size = <0x8000>; // L1, 32K + i-cache-size = <0x8000>; // L1, 32K + timebase-frequency = <0>; + bus-frequency = <0>; + clock-frequency = <0>; + next-level-cache = <&L2>; + }; + }; + + memory { + device_type = "memory"; + reg = <0x0 0x0 0x0 0x0>; // Filled in by U-Boot + }; + + localbus@ef005000 { + #address-cells = <2>; + #size-cells = <1>; + compatible = "fsl,mpc8572-elbc", "fsl,elbc", "simple-bus"; + reg = <0 0xef005000 0 0x1000>; + interrupts = <19 2>; + interrupt-parent = <&mpic>; + /* Local bus region mappings */ + ranges = <0 0 0 0xf8000000 0x8000000 /* CS0: Flash 1 */ + 1 0 0 0xf0000000 0x8000000 /* CS1: Flash 2 */ + 2 0 0 0xef800000 0x40000 /* CS2: NAND CE1 */ + 3 0 0 0xef840000 0x40000 /* CS3: NAND CE2 */ + 4 0 0 0xe9000000 0x100000>; /* CS4: USB */ + + nor-boot@0,0 { + compatible = "amd,s29gl01gp", "cfi-flash"; + bank-width = <2>; + reg = <0 0 0x8000000>; /* 128MB */ + #address-cells = <1>; + #size-cells = <1>; + partition@0 { + label = "Primary user space"; + reg = <0x00000000 0x6f00000>; /* 111 MB */ + }; + partition@6f00000 { + label = "Primary kernel"; + reg = <0x6f00000 0x1000000>; /* 16 MB */ + }; + partition@7f00000 { + label = "Primary DTB"; + reg = <0x7f00000 0x40000>; /* 256 KB */ + }; + partition@7f40000 { + label = "Primary U-Boot environment"; + reg = <0x7f40000 0x40000>; /* 256 KB */ + }; + partition@7f80000 { + label = "Primary U-Boot"; + reg = <0x7f80000 0x80000>; /* 512 KB */ + read-only; + }; + }; + + nor-alternate@1,0 { + compatible = "amd,s29gl01gp", "cfi-flash"; + bank-width = <2>; + //reg = <0xf0000000 0x08000000>; /* 128MB */ + reg = <1 0 0x8000000>; /* 128MB */ + #address-cells = <1>; + #size-cells = <1>; + partition@0 { + label = "Secondary user space"; + reg = <0x00000000 0x6f00000>; /* 111 MB */ + }; + partition@6f00000 { + label = "Secondary kernel"; + reg = <0x6f00000 0x1000000>; /* 16 MB */ + }; + partition@7f00000 { + label = "Secondary DTB"; + reg = <0x7f00000 0x40000>; /* 256 KB */ + }; + partition@7f40000 { + label = "Secondary U-Boot environment"; + reg = <0x7f40000 0x40000>; /* 256 KB */ + }; + partition@7f80000 { + label = "Secondary U-Boot"; + reg = <0x7f80000 0x80000>; /* 512 KB */ + read-only; + }; + }; + + nand@2,0 { + #address-cells = <1>; + #size-cells = <1>; + /* + * Actual part could be ST Micro NAND08GW3B2A (1 GB), + * Micron MT29F8G08DAA (2x 512 MB), or Micron + * MT29F16G08FAA (2x 1 GB), depending on the build + * configuration + */ + compatible = "fsl,mpc8572-fcm-nand", + "fsl,elbc-fcm-nand"; + reg = <2 0 0x40000>; + /* U-Boot should fix this up if chip size > 1 GB */ + partition@0 { + label = "NAND Filesystem"; + reg = <0 0x40000000>; + }; + }; + + usb@4,0 { + compatible = "nxp,usb-isp1761"; + reg = <4 0 0x100000>; + bus-width = <32>; + interrupt-parent = <&mpic>; + interrupts = <10 1>; + }; + }; + + soc8572@ef000000 { + #address-cells = <1>; + #size-cells = <1>; + device_type = "soc"; + compatible = "fsl,mpc8572-immr", "simple-bus"; + ranges = <0x0 0 0xef000000 0x100000>; + bus-frequency = <0>; // Filled out by uboot. + + ecm-law@0 { + compatible = "fsl,ecm-law"; + reg = <0x0 0x1000>; + fsl,num-laws = <12>; + }; + + ecm@1000 { + compatible = "fsl,mpc8572-ecm", "fsl,ecm"; + reg = <0x1000 0x1000>; + interrupts = <17 2>; + interrupt-parent = <&mpic>; + }; + + memory-controller@2000 { + compatible = "fsl,mpc8572-memory-controller"; + reg = <0x2000 0x1000>; + interrupt-parent = <&mpic>; + interrupts = <18 2>; + }; + + memory-controller@6000 { + compatible = "fsl,mpc8572-memory-controller"; + reg = <0x6000 0x1000>; + interrupt-parent = <&mpic>; + interrupts = <18 2>; + }; + + L2: l2-cache-controller@20000 { + compatible = "fsl,mpc8572-l2-cache-controller"; + reg = <0x20000 0x1000>; + cache-line-size = <32>; // 32 bytes + cache-size = <0x100000>; // L2, 1M + interrupt-parent = <&mpic>; + interrupts = <16 2>; + }; + + i2c@3000 { + #address-cells = <1>; + #size-cells = <0>; + cell-index = <0>; + compatible = "fsl-i2c"; + reg = <0x3000 0x100>; + interrupts = <43 2>; + interrupt-parent = <&mpic>; + dfsrr; + + temp-sensor@48 { + compatible = "dallas,ds1631", "dallas,ds1621"; + reg = <0x48>; + }; + + temp-sensor@4c { + compatible = "adi,adt7461"; + reg = <0x4c>; + }; + + cpu-supervisor@51 { + compatible = "dallas,ds4510"; + reg = <0x51>; + }; + + eeprom@54 { + compatible = "atmel,at24c128b"; + reg = <0x54>; + }; + + rtc@68 { + compatible = "stm,m41t00", + "dallas,ds1338"; + reg = <0x68>; + }; + + pcie-switch@6a { + compatible = "plx,pex8648"; + reg = <0x6a>; + }; + + /* On-board signals for VID, flash, serial */ + gpio1: gpio@18 { + compatible = "nxp,pca9557"; + reg = <0x18>; + #gpio-cells = <2>; + gpio-controller; + polarity = <0x00>; + }; + + /* PMC0/XMC0 signals */ + gpio2: gpio@1c { + compatible = "nxp,pca9557"; + reg = <0x1c>; + #gpio-cells = <2>; + gpio-controller; + polarity = <0x00>; + }; + + /* PMC1/XMC1 signals */ + gpio3: gpio@1d { + compatible = "nxp,pca9557"; + reg = <0x1d>; + #gpio-cells = <2>; + gpio-controller; + polarity = <0x00>; + }; + + /* CompactPCI signals (sysen, GA[4:0]) */ + gpio4: gpio@1e { + compatible = "nxp,pca9557"; + reg = <0x1e>; + #gpio-cells = <2>; + gpio-controller; + polarity = <0x00>; + }; + + /* CompactPCI J5 GPIO and FAL/DEG/PRST */ + gpio5: gpio@1f { + compatible = "nxp,pca9557"; + reg = <0x1f>; + #gpio-cells = <2>; + gpio-controller; + polarity = <0x00>; + }; + }; + + i2c@3100 { + #address-cells = <1>; + #size-cells = <0>; + cell-index = <1>; + compatible = "fsl-i2c"; + reg = <0x3100 0x100>; + interrupts = <43 2>; + interrupt-parent = <&mpic>; + dfsrr; + }; + + dma@c300 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,mpc8572-dma", "fsl,eloplus-dma"; + reg = <0xc300 0x4>; + ranges = <0x0 0xc100 0x200>; + cell-index = <1>; + dma-channel@0 { + compatible = "fsl,mpc8572-dma-channel", + "fsl,eloplus-dma-channel"; + reg = <0x0 0x80>; + cell-index = <0>; + interrupt-parent = <&mpic>; + interrupts = <76 2>; + }; + dma-channel@80 { + compatible = "fsl,mpc8572-dma-channel", + "fsl,eloplus-dma-channel"; + reg = <0x80 0x80>; + cell-index = <1>; + interrupt-parent = <&mpic>; + interrupts = <77 2>; + }; + dma-channel@100 { + compatible = "fsl,mpc8572-dma-channel", + "fsl,eloplus-dma-channel"; + reg = <0x100 0x80>; + cell-index = <2>; + interrupt-parent = <&mpic>; + interrupts = <78 2>; + }; + dma-channel@180 { + compatible = "fsl,mpc8572-dma-channel", + "fsl,eloplus-dma-channel"; + reg = <0x180 0x80>; + cell-index = <3>; + interrupt-parent = <&mpic>; + interrupts = <79 2>; + }; + }; + + dma@21300 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,mpc8572-dma", "fsl,eloplus-dma"; + reg = <0x21300 0x4>; + ranges = <0x0 0x21100 0x200>; + cell-index = <0>; + dma-channel@0 { + compatible = "fsl,mpc8572-dma-channel", + "fsl,eloplus-dma-channel"; + reg = <0x0 0x80>; + cell-index = <0>; + interrupt-parent = <&mpic>; + interrupts = <20 2>; + }; + dma-channel@80 { + compatible = "fsl,mpc8572-dma-channel", + "fsl,eloplus-dma-channel"; + reg = <0x80 0x80>; + cell-index = <1>; + interrupt-parent = <&mpic>; + interrupts = <21 2>; + }; + dma-channel@100 { + compatible = "fsl,mpc8572-dma-channel", + "fsl,eloplus-dma-channel"; + reg = <0x100 0x80>; + cell-index = <2>; + interrupt-parent = <&mpic>; + interrupts = <22 2>; + }; + dma-channel@180 { + compatible = "fsl,mpc8572-dma-channel", + "fsl,eloplus-dma-channel"; + reg = <0x180 0x80>; + cell-index = <3>; + interrupt-parent = <&mpic>; + interrupts = <23 2>; + }; + }; + + /* eTSEC 1 front panel 0 */ + enet0: ethernet@24000 { + #address-cells = <1>; + #size-cells = <1>; + cell-index = <0>; + device_type = "network"; + model = "eTSEC"; + compatible = "gianfar"; + reg = <0x24000 0x1000>; + ranges = <0x0 0x24000 0x1000>; + local-mac-address = [ 00 00 00 00 00 00 ]; + interrupts = <29 2 30 2 34 2>; + interrupt-parent = <&mpic>; + tbi-handle = <&tbi0>; + phy-handle = <&phy0>; + phy-connection-type = "sgmii"; + + mdio@520 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,gianfar-mdio"; + reg = <0x520 0x20>; + + phy0: ethernet-phy@1 { + interrupt-parent = <&mpic>; + interrupts = <4 1>; + reg = <0x1>; + }; + phy1: ethernet-phy@2 { + interrupt-parent = <&mpic>; + interrupts = <4 1>; + reg = <0x2>; + }; + phy2: ethernet-phy@3 { + interrupt-parent = <&mpic>; + interrupts = <5 1>; + reg = <0x3>; + }; + phy3: ethernet-phy@4 { + interrupt-parent = <&mpic>; + interrupts = <5 1>; + reg = <0x4>; + }; + tbi0: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + }; + + /* eTSEC 2 front panel 1 */ + enet1: ethernet@25000 { + #address-cells = <1>; + #size-cells = <1>; + cell-index = <1>; + device_type = "network"; + model = "eTSEC"; + compatible = "gianfar"; + reg = <0x25000 0x1000>; + ranges = <0x0 0x25000 0x1000>; + local-mac-address = [ 00 00 00 00 00 00 ]; + interrupts = <35 2 36 2 40 2>; + interrupt-parent = <&mpic>; + tbi-handle = <&tbi1>; + phy-handle = <&phy1>; + phy-connection-type = "sgmii"; + + mdio@520 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,gianfar-tbi"; + reg = <0x520 0x20>; + + tbi1: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + }; + + /* eTSEC 3 PICMG2.16 backplane port 0 */ + enet2: ethernet@26000 { + #address-cells = <1>; + #size-cells = <1>; + cell-index = <2>; + device_type = "network"; + model = "eTSEC"; + compatible = "gianfar"; + reg = <0x26000 0x1000>; + ranges = <0x0 0x26000 0x1000>; + local-mac-address = [ 00 00 00 00 00 00 ]; + interrupts = <31 2 32 2 33 2>; + interrupt-parent = <&mpic>; + tbi-handle = <&tbi2>; + phy-handle = <&phy2>; + phy-connection-type = "sgmii"; + + mdio@520 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,gianfar-tbi"; + reg = <0x520 0x20>; + + tbi2: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + }; + + /* eTSEC 4 PICMG2.16 backplane port 1 */ + enet3: ethernet@27000 { + #address-cells = <1>; + #size-cells = <1>; + cell-index = <3>; + device_type = "network"; + model = "eTSEC"; + compatible = "gianfar"; + reg = <0x27000 0x1000>; + ranges = <0x0 0x27000 0x1000>; + local-mac-address = [ 00 00 00 00 00 00 ]; + interrupts = <37 2 38 2 39 2>; + interrupt-parent = <&mpic>; + tbi-handle = <&tbi3>; + phy-handle = <&phy3>; + phy-connection-type = "sgmii"; + + mdio@520 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,gianfar-tbi"; + reg = <0x520 0x20>; + + tbi3: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + }; + + /* UART0 */ + serial0: serial@4500 { + cell-index = <0>; + device_type = "serial"; + compatible = "fsl,ns16550", "ns16550"; + reg = <0x4500 0x100>; + clock-frequency = <0>; + interrupts = <42 2>; + interrupt-parent = <&mpic>; + }; + + /* UART1 */ + serial1: serial@4600 { + cell-index = <1>; + device_type = "serial"; + compatible = "fsl,ns16550", "ns16550"; + reg = <0x4600 0x100>; + clock-frequency = <0>; + interrupts = <42 2>; + interrupt-parent = <&mpic>; + }; + + global-utilities@e0000 { //global utilities block + compatible = "fsl,mpc8572-guts"; + reg = <0xe0000 0x1000>; + fsl,has-rstcr; + }; + + msi@41600 { + compatible = "fsl,mpc8572-msi", "fsl,mpic-msi"; + reg = <0x41600 0x80>; + msi-available-ranges = <0 0x100>; + interrupts = < + 0xe0 0 + 0xe1 0 + 0xe2 0 + 0xe3 0 + 0xe4 0 + 0xe5 0 + 0xe6 0 + 0xe7 0>; + interrupt-parent = <&mpic>; + }; + + crypto@30000 { + compatible = "fsl,sec3.0", "fsl,sec2.4", "fsl,sec2.2", + "fsl,sec2.1", "fsl,sec2.0"; + reg = <0x30000 0x10000>; + interrupts = <45 2 58 2>; + interrupt-parent = <&mpic>; + fsl,num-channels = <4>; + fsl,channel-fifo-len = <24>; + fsl,exec-units-mask = <0x9fe>; + fsl,descriptor-types-mask = <0x3ab0ebf>; + }; + + mpic: pic@40000 { + interrupt-controller; + #address-cells = <0>; + #interrupt-cells = <2>; + reg = <0x40000 0x40000>; + compatible = "chrp,open-pic"; + device_type = "open-pic"; + }; + + gpio0: gpio@f000 { + compatible = "fsl,mpc8572-gpio"; + reg = <0xf000 0x1000>; + interrupts = <47 2>; + interrupt-parent = <&mpic>; + #gpio-cells = <2>; + gpio-controller; + }; + + gpio-leds { + compatible = "gpio-leds"; + + heartbeat { + label = "Heartbeat"; + gpios = <&gpio0 4 1>; + linux,default-trigger = "heartbeat"; + }; + + yellow { + label = "Yellow"; + gpios = <&gpio0 5 1>; + }; + + red { + label = "Red"; + gpios = <&gpio0 6 1>; + }; + + green { + label = "Green"; + gpios = <&gpio0 7 1>; + }; + }; + + /* PME (pattern-matcher) */ + pme@10000 { + compatible = "fsl,mpc8572-pme", "pme8572"; + reg = <0x10000 0x5000>; + interrupts = <57 2 64 2 65 2 66 2 67 2>; + interrupt-parent = <&mpic>; + }; + + tlu@2f000 { + compatible = "fsl,mpc8572-tlu", "fsl_tlu"; + reg = <0x2f000 0x1000>; + interrupts = <61 2>; + interrupt-parent = <&mpic>; + }; + + tlu@15000 { + compatible = "fsl,mpc8572-tlu", "fsl_tlu"; + reg = <0x15000 0x1000>; + interrupts = <75 2>; + interrupt-parent = <&mpic>; + }; + }; + + /* + * PCI Express controller 3 @ ef008000 is not used. + * This would have been pci0 on other mpc85xx platforms. + * + * PCI Express controller 2 @ ef009000 is not used. + * This would have been pci1 on other mpc85xx platforms. + */ + + /* PCI Express controller 1, wired to PEX8648 PCIe switch */ + pci2: pcie@ef00a000 { + compatible = "fsl,mpc8548-pcie"; + device_type = "pci"; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + reg = <0 0xef00a000 0 0x1000>; + bus-range = <0 255>; + ranges = <0x2000000 0x0 0x80000000 0 0x80000000 0x0 0x40000000 + 0x1000000 0x0 0x00000000 0 0xe8000000 0x0 0x10000>; + clock-frequency = <33333333>; + interrupt-parent = <&mpic>; + interrupts = <26 2>; + interrupt-map-mask = <0xf800 0x0 0x0 0x7>; + interrupt-map = < + /* IDSEL 0x0 */ + 0x0 0x0 0x0 0x1 &mpic 0x0 0x1 + 0x0 0x0 0x0 0x2 &mpic 0x1 0x1 + 0x0 0x0 0x0 0x3 &mpic 0x2 0x1 + 0x0 0x0 0x0 0x4 &mpic 0x3 0x1 + >; + pcie@0 { + reg = <0x0 0x0 0x0 0x0 0x0>; + #size-cells = <2>; + #address-cells = <3>; + device_type = "pci"; + ranges = <0x2000000 0x0 0x80000000 + 0x2000000 0x0 0x80000000 + 0x0 0x40000000 + + 0x1000000 0x0 0x0 + 0x1000000 0x0 0x0 + 0x0 0x100000>; + }; + }; +}; diff --git a/arch/powerpc/boot/dts/xpedite5200.dts b/arch/powerpc/boot/dts/xpedite5200.dts new file mode 100644 index 000000000..8fd7b7031 --- /dev/null +++ b/arch/powerpc/boot/dts/xpedite5200.dts @@ -0,0 +1,468 @@ +/* + * Copyright (C) 2009 Extreme Engineering Solutions, Inc. + * Based on TQM8548 device tree + * + * XPedite5200 PrPMC/XMC module based on MPC8548E + * + * This is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +/dts-v1/; + +/ { + model = "xes,xpedite5200"; + compatible = "xes,xpedite5200", "xes,MPC8548"; + #address-cells = <1>; + #size-cells = <1>; + + aliases { + ethernet0 = &enet0; + ethernet1 = &enet1; + ethernet2 = &enet2; + ethernet3 = &enet3; + + serial0 = &serial0; + serial1 = &serial1; + pci0 = &pci0; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + PowerPC,8548@0 { + device_type = "cpu"; + reg = <0>; + d-cache-line-size = <32>; // 32 bytes + i-cache-line-size = <32>; // 32 bytes + d-cache-size = <0x8000>; // L1, 32K + i-cache-size = <0x8000>; // L1, 32K + next-level-cache = <&L2>; + }; + }; + + memory { + device_type = "memory"; + reg = <0x0 0x0>; // Filled in by U-Boot + }; + + soc@ef000000 { + #address-cells = <1>; + #size-cells = <1>; + device_type = "soc"; + ranges = <0x0 0xef000000 0x100000>; + bus-frequency = <0>; + compatible = "fsl,mpc8548-immr", "simple-bus"; + + ecm-law@0 { + compatible = "fsl,ecm-law"; + reg = <0x0 0x1000>; + fsl,num-laws = <12>; + }; + + ecm@1000 { + compatible = "fsl,mpc8548-ecm", "fsl,ecm"; + reg = <0x1000 0x1000>; + interrupts = <17 2>; + interrupt-parent = <&mpic>; + }; + + memory-controller@2000 { + compatible = "fsl,mpc8548-memory-controller"; + reg = <0x2000 0x1000>; + interrupt-parent = <&mpic>; + interrupts = <18 2>; + }; + + L2: l2-cache-controller@20000 { + compatible = "fsl,mpc8548-l2-cache-controller"; + reg = <0x20000 0x1000>; + cache-line-size = <32>; // 32 bytes + cache-size = <0x80000>; // L2, 512K + interrupt-parent = <&mpic>; + interrupts = <16 2>; + }; + + /* On-card I2C */ + i2c@3000 { + #address-cells = <1>; + #size-cells = <0>; + cell-index = <0>; + compatible = "fsl-i2c"; + reg = <0x3000 0x100>; + interrupts = <43 2>; + interrupt-parent = <&mpic>; + dfsrr; + + /* + * Board GPIO: + * 0: BRD_CFG0 (1: P14 IO present) + * 1: BRD_CFG1 (1: FP ethernet present) + * 2: BRD_CFG2 (1: XMC IO present) + * 3: XMC root complex indicator + * 4: Flash boot device indicator + * 5: Flash write protect enable + * 6: PMC monarch indicator + * 7: PMC EREADY + */ + gpio1: gpio@18 { + compatible = "nxp,pca9556"; + reg = <0x18>; + #gpio-cells = <2>; + gpio-controller; + polarity = <0x00>; + }; + + /* P14 GPIO */ + gpio2: gpio@19 { + compatible = "nxp,pca9556"; + reg = <0x19>; + #gpio-cells = <2>; + gpio-controller; + polarity = <0x00>; + }; + + eeprom@50 { + compatible = "atmel,at24c16"; + reg = <0x50>; + }; + + rtc@68 { + compatible = "stm,m41t00", + "dallas,ds1338"; + reg = <0x68>; + }; + + dtt@48 { + compatible = "maxim,max1237"; + reg = <0x34>; + }; + }; + + /* Off-card I2C */ + i2c@3100 { + #address-cells = <1>; + #size-cells = <0>; + cell-index = <1>; + compatible = "fsl-i2c"; + reg = <0x3100 0x100>; + interrupts = <43 2>; + interrupt-parent = <&mpic>; + dfsrr; + }; + + dma@21300 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,mpc8548-dma", "fsl,eloplus-dma"; + reg = <0x21300 0x4>; + ranges = <0x0 0x21100 0x200>; + cell-index = <0>; + dma-channel@0 { + compatible = "fsl,mpc8548-dma-channel", + "fsl,eloplus-dma-channel"; + reg = <0x0 0x80>; + cell-index = <0>; + interrupt-parent = <&mpic>; + interrupts = <20 2>; + }; + dma-channel@80 { + compatible = "fsl,mpc8548-dma-channel", + "fsl,eloplus-dma-channel"; + reg = <0x80 0x80>; + cell-index = <1>; + interrupt-parent = <&mpic>; + interrupts = <21 2>; + }; + dma-channel@100 { + compatible = "fsl,mpc8548-dma-channel", + "fsl,eloplus-dma-channel"; + reg = <0x100 0x80>; + cell-index = <2>; + interrupt-parent = <&mpic>; + interrupts = <22 2>; + }; + dma-channel@180 { + compatible = "fsl,mpc8548-dma-channel", + "fsl,eloplus-dma-channel"; + reg = <0x180 0x80>; + cell-index = <3>; + interrupt-parent = <&mpic>; + interrupts = <23 2>; + }; + }; + + /* eTSEC1: Front panel port 0 */ + enet0: ethernet@24000 { + #address-cells = <1>; + #size-cells = <1>; + cell-index = <0>; + device_type = "network"; + model = "eTSEC"; + compatible = "gianfar"; + reg = <0x24000 0x1000>; + ranges = <0x0 0x24000 0x1000>; + local-mac-address = [ 00 00 00 00 00 00 ]; + interrupts = <29 2 30 2 34 2>; + interrupt-parent = <&mpic>; + tbi-handle = <&tbi0>; + phy-handle = <&phy0>; + + mdio@520 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,gianfar-mdio"; + reg = <0x520 0x20>; + + phy0: ethernet-phy@1 { + interrupt-parent = <&mpic>; + interrupts = <8 1>; + reg = <0x1>; + }; + phy1: ethernet-phy@2 { + interrupt-parent = <&mpic>; + interrupts = <8 1>; + reg = <0x2>; + }; + phy2: ethernet-phy@3 { + interrupt-parent = <&mpic>; + interrupts = <8 1>; + reg = <0x3>; + }; + phy3: ethernet-phy@4 { + interrupt-parent = <&mpic>; + interrupts = <8 1>; + reg = <0x4>; + }; + tbi0: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + }; + + /* eTSEC2: Front panel port 1 */ + enet1: ethernet@25000 { + #address-cells = <1>; + #size-cells = <1>; + cell-index = <1>; + device_type = "network"; + model = "eTSEC"; + compatible = "gianfar"; + reg = <0x25000 0x1000>; + ranges = <0x0 0x25000 0x1000>; + local-mac-address = [ 00 00 00 00 00 00 ]; + interrupts = <35 2 36 2 40 2>; + interrupt-parent = <&mpic>; + tbi-handle = <&tbi1>; + phy-handle = <&phy1>; + + mdio@520 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,gianfar-tbi"; + reg = <0x520 0x20>; + + tbi1: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + }; + + /* eTSEC3: Rear panel port 2 */ + enet2: ethernet@26000 { + #address-cells = <1>; + #size-cells = <1>; + cell-index = <2>; + device_type = "network"; + model = "eTSEC"; + compatible = "gianfar"; + reg = <0x26000 0x1000>; + ranges = <0x0 0x26000 0x1000>; + local-mac-address = [ 00 00 00 00 00 00 ]; + interrupts = <31 2 32 2 33 2>; + interrupt-parent = <&mpic>; + tbi-handle = <&tbi2>; + phy-handle = <&phy2>; + + mdio@520 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,gianfar-tbi"; + reg = <0x520 0x20>; + + tbi2: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + }; + + /* eTSEC4: Rear panel port 3 */ + enet3: ethernet@27000 { + #address-cells = <1>; + #size-cells = <1>; + cell-index = <3>; + device_type = "network"; + model = "eTSEC"; + compatible = "gianfar"; + reg = <0x27000 0x1000>; + ranges = <0x0 0x27000 0x1000>; + local-mac-address = [ 00 00 00 00 00 00 ]; + interrupts = <37 2 38 2 39 2>; + interrupt-parent = <&mpic>; + tbi-handle = <&tbi3>; + phy-handle = <&phy3>; + + mdio@520 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,gianfar-tbi"; + reg = <0x520 0x20>; + + tbi3: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + }; + + serial0: serial@4500 { + cell-index = <0>; + device_type = "serial"; + compatible = "fsl,ns16550", "ns16550"; + reg = <0x4500 0x100>; + clock-frequency = <0>; + current-speed = <115200>; + interrupts = <42 2>; + interrupt-parent = <&mpic>; + }; + + serial1: serial@4600 { + cell-index = <1>; + device_type = "serial"; + compatible = "fsl,ns16550", "ns16550"; + reg = <0x4600 0x100>; + clock-frequency = <0>; + current-speed = <115200>; + interrupts = <42 2>; + interrupt-parent = <&mpic>; + }; + + global-utilities@e0000 { // global utilities reg + compatible = "fsl,mpc8548-guts"; + reg = <0xe0000 0x1000>; + fsl,has-rstcr; + }; + + mpic: pic@40000 { + interrupt-controller; + #address-cells = <0>; + #interrupt-cells = <2>; + reg = <0x40000 0x40000>; + compatible = "chrp,open-pic"; + device_type = "open-pic"; + }; + }; + + localbus@ef005000 { + compatible = "fsl,mpc8548-localbus", "fsl,pq3-localbus", + "simple-bus"; + #address-cells = <2>; + #size-cells = <1>; + reg = <0xef005000 0x100>; // BRx, ORx, etc. + interrupt-parent = <&mpic>; + interrupts = <19 2>; + + ranges = < + 0 0x0 0xfc000000 0x04000000 // NOR boot flash + 1 0x0 0xf8000000 0x04000000 // NOR expansion flash + 2 0x0 0xef800000 0x00010000 // NAND CE1 + 3 0x0 0xef840000 0x00010000 // NAND CE2 + >; + + nor-boot@0,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "cfi-flash"; + reg = <0 0x0 0x4000000>; + bank-width = <2>; + + partition@0 { + label = "Primary OS"; + reg = <0x00000000 0x180000>; + }; + partition@180000 { + label = "Secondary OS"; + reg = <0x00180000 0x180000>; + }; + partition@300000 { + label = "User"; + reg = <0x00300000 0x3c80000>; + }; + partition@3f80000 { + label = "Boot firmware"; + reg = <0x03f80000 0x80000>; + }; + }; + + nor-alternate@1,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "cfi-flash"; + reg = <1 0x0 0x4000000>; + bank-width = <2>; + + partition@0 { + label = "Filesystem"; + reg = <0x00000000 0x3f80000>; + }; + partition@3f80000 { + label = "Alternate boot firmware"; + reg = <0x03f80000 0x80000>; + }; + }; + + nand@2,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "xes,address-ctl-nand"; + reg = <2 0x0 0x10000>; + cle-line = <0x8>; /* CLE tied to A3 */ + ale-line = <0x10>; /* ALE tied to A4 */ + + /* U-Boot should fix this up */ + partition@0 { + label = "NAND Filesystem"; + reg = <0 0x40000000>; + }; + }; + }; + + /* PMC interface */ + pci0: pci@ef008000 { + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + compatible = "fsl,mpc8540-pcix", "fsl,mpc8540-pci"; + device_type = "pci"; + reg = <0xef008000 0x1000>; + clock-frequency = <33333333>; + interrupt-map-mask = <0xf800 0x0 0x0 0x7>; + interrupt-map = < + /* IDSEL */ + 0xe000 0 0 1 &mpic 2 1 + 0xe000 0 0 2 &mpic 3 1>; + + interrupt-parent = <&mpic>; + interrupts = <24 2>; + bus-range = <0 0>; + ranges = <0x02000000 0 0x80000000 0x80000000 0 0x40000000 + 0x01000000 0 0x00000000 0xe8000000 0 0x00800000>; + }; + + /* XMC PCIe is not yet enabled in U-Boot on XPedite5200 */ +}; diff --git a/arch/powerpc/boot/dts/xpedite5200_xmon.dts b/arch/powerpc/boot/dts/xpedite5200_xmon.dts new file mode 100644 index 000000000..0baa8283d --- /dev/null +++ b/arch/powerpc/boot/dts/xpedite5200_xmon.dts @@ -0,0 +1,508 @@ +/* + * Copyright (C) 2009 Extreme Engineering Solutions, Inc. + * Based on TQM8548 device tree + * + * XPedite5200 PrPMC/XMC module based on MPC8548E. This dts is for the + * xMon boot loader memory map which differs from U-Boot's. + * + * This is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +/dts-v1/; + +/ { + model = "xes,xpedite5200"; + compatible = "xes,xpedite5200", "xes,MPC8548"; + #address-cells = <1>; + #size-cells = <1>; + form-factor = "PMC/XMC"; + boot-bank = <0x0>; + + aliases { + ethernet0 = &enet0; + ethernet1 = &enet1; + ethernet2 = &enet2; + ethernet3 = &enet3; + + serial0 = &serial0; + serial1 = &serial1; + pci0 = &pci0; + pci1 = &pci1; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + PowerPC,8548@0 { + device_type = "cpu"; + reg = <0>; + d-cache-line-size = <32>; // 32 bytes + i-cache-line-size = <32>; // 32 bytes + d-cache-size = <0x8000>; // L1, 32K + i-cache-size = <0x8000>; // L1, 32K + next-level-cache = <&L2>; + }; + }; + + memory { + device_type = "memory"; + reg = <0x0 0x0>; // Filled in by boot loader + }; + + soc@ef000000 { + #address-cells = <1>; + #size-cells = <1>; + device_type = "soc"; + ranges = <0x0 0xef000000 0x100000>; + bus-frequency = <0>; + compatible = "fsl,mpc8548-immr", "simple-bus"; + + ecm-law@0 { + compatible = "fsl,ecm-law"; + reg = <0x0 0x1000>; + fsl,num-laws = <12>; + }; + + ecm@1000 { + compatible = "fsl,mpc8548-ecm", "fsl,ecm"; + reg = <0x1000 0x1000>; + interrupts = <17 2>; + interrupt-parent = <&mpic>; + }; + + memory-controller@2000 { + compatible = "fsl,mpc8548-memory-controller"; + reg = <0x2000 0x1000>; + interrupt-parent = <&mpic>; + interrupts = <18 2>; + }; + + L2: l2-cache-controller@20000 { + compatible = "fsl,mpc8548-l2-cache-controller"; + reg = <0x20000 0x1000>; + cache-line-size = <32>; // 32 bytes + cache-size = <0x80000>; // L2, 512K + interrupt-parent = <&mpic>; + interrupts = <16 2>; + }; + + /* On-card I2C */ + i2c@3000 { + #address-cells = <1>; + #size-cells = <0>; + cell-index = <0>; + compatible = "fsl-i2c"; + reg = <0x3000 0x100>; + interrupts = <43 2>; + interrupt-parent = <&mpic>; + dfsrr; + + /* + * Board GPIO: + * 0: BRD_CFG0 (1: P14 IO present) + * 1: BRD_CFG1 (1: FP ethernet present) + * 2: BRD_CFG2 (1: XMC IO present) + * 3: XMC root complex indicator + * 4: Flash boot device indicator + * 5: Flash write protect enable + * 6: PMC monarch indicator + * 7: PMC EREADY + */ + gpio1: gpio@18 { + compatible = "nxp,pca9556"; + reg = <0x18>; + #gpio-cells = <2>; + gpio-controller; + polarity = <0x00>; + }; + + /* P14 GPIO */ + gpio2: gpio@19 { + compatible = "nxp,pca9556"; + reg = <0x19>; + #gpio-cells = <2>; + gpio-controller; + polarity = <0x00>; + }; + + eeprom@50 { + compatible = "atmel,at24c16"; + reg = <0x50>; + }; + + rtc@68 { + compatible = "stm,m41t00", + "dallas,ds1338"; + reg = <0x68>; + }; + + dtt@48 { + compatible = "maxim,max1237"; + reg = <0x34>; + }; + }; + + /* Off-card I2C */ + i2c@3100 { + #address-cells = <1>; + #size-cells = <0>; + cell-index = <1>; + compatible = "fsl-i2c"; + reg = <0x3100 0x100>; + interrupts = <43 2>; + interrupt-parent = <&mpic>; + dfsrr; + }; + + dma@21300 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,mpc8548-dma", "fsl,eloplus-dma"; + reg = <0x21300 0x4>; + ranges = <0x0 0x21100 0x200>; + cell-index = <0>; + dma-channel@0 { + compatible = "fsl,mpc8548-dma-channel", + "fsl,eloplus-dma-channel"; + reg = <0x0 0x80>; + cell-index = <0>; + interrupt-parent = <&mpic>; + interrupts = <20 2>; + }; + dma-channel@80 { + compatible = "fsl,mpc8548-dma-channel", + "fsl,eloplus-dma-channel"; + reg = <0x80 0x80>; + cell-index = <1>; + interrupt-parent = <&mpic>; + interrupts = <21 2>; + }; + dma-channel@100 { + compatible = "fsl,mpc8548-dma-channel", + "fsl,eloplus-dma-channel"; + reg = <0x100 0x80>; + cell-index = <2>; + interrupt-parent = <&mpic>; + interrupts = <22 2>; + }; + dma-channel@180 { + compatible = "fsl,mpc8548-dma-channel", + "fsl,eloplus-dma-channel"; + reg = <0x180 0x80>; + cell-index = <3>; + interrupt-parent = <&mpic>; + interrupts = <23 2>; + }; + }; + + /* eTSEC1: Front panel port 0 */ + enet0: ethernet@24000 { + #address-cells = <1>; + #size-cells = <1>; + cell-index = <0>; + device_type = "network"; + model = "eTSEC"; + compatible = "gianfar"; + reg = <0x24000 0x1000>; + ranges = <0x0 0x24000 0x1000>; + local-mac-address = [ 00 00 00 00 00 00 ]; + interrupts = <29 2 30 2 34 2>; + interrupt-parent = <&mpic>; + tbi-handle = <&tbi0>; + phy-handle = <&phy0>; + + mdio@520 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,gianfar-mdio"; + reg = <0x520 0x20>; + + phy0: ethernet-phy@1 { + interrupt-parent = <&mpic>; + interrupts = <8 1>; + reg = <0x1>; + }; + phy1: ethernet-phy@2 { + interrupt-parent = <&mpic>; + interrupts = <8 1>; + reg = <0x2>; + }; + phy2: ethernet-phy@3 { + interrupt-parent = <&mpic>; + interrupts = <8 1>; + reg = <0x3>; + }; + phy3: ethernet-phy@4 { + interrupt-parent = <&mpic>; + interrupts = <8 1>; + reg = <0x4>; + }; + tbi0: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + }; + + /* eTSEC2: Front panel port 1 */ + enet1: ethernet@25000 { + #address-cells = <1>; + #size-cells = <1>; + cell-index = <1>; + device_type = "network"; + model = "eTSEC"; + compatible = "gianfar"; + reg = <0x25000 0x1000>; + ranges = <0x0 0x25000 0x1000>; + local-mac-address = [ 00 00 00 00 00 00 ]; + interrupts = <35 2 36 2 40 2>; + interrupt-parent = <&mpic>; + tbi-handle = <&tbi1>; + phy-handle = <&phy1>; + + mdio@520 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,gianfar-tbi"; + reg = <0x520 0x20>; + + tbi1: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + }; + + /* eTSEC3: Rear panel port 2 */ + enet2: ethernet@26000 { + #address-cells = <1>; + #size-cells = <1>; + cell-index = <2>; + device_type = "network"; + model = "eTSEC"; + compatible = "gianfar"; + reg = <0x26000 0x1000>; + ranges = <0x0 0x26000 0x1000>; + local-mac-address = [ 00 00 00 00 00 00 ]; + interrupts = <31 2 32 2 33 2>; + interrupt-parent = <&mpic>; + tbi-handle = <&tbi2>; + phy-handle = <&phy2>; + + mdio@520 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,gianfar-tbi"; + reg = <0x520 0x20>; + + tbi2: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + }; + + /* eTSEC4: Rear panel port 3 */ + enet3: ethernet@27000 { + #address-cells = <1>; + #size-cells = <1>; + cell-index = <3>; + device_type = "network"; + model = "eTSEC"; + compatible = "gianfar"; + reg = <0x27000 0x1000>; + ranges = <0x0 0x27000 0x1000>; + local-mac-address = [ 00 00 00 00 00 00 ]; + interrupts = <37 2 38 2 39 2>; + interrupt-parent = <&mpic>; + tbi-handle = <&tbi3>; + phy-handle = <&phy3>; + + mdio@520 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,gianfar-tbi"; + reg = <0x520 0x20>; + + tbi3: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + }; + + serial0: serial@4500 { + cell-index = <0>; + device_type = "serial"; + compatible = "fsl,ns16550", "ns16550"; + reg = <0x4500 0x100>; + clock-frequency = <0>; + current-speed = <9600>; + interrupts = <42 2>; + interrupt-parent = <&mpic>; + }; + + serial1: serial@4600 { + cell-index = <1>; + device_type = "serial"; + compatible = "fsl,ns16550", "ns16550"; + reg = <0x4600 0x100>; + clock-frequency = <0>; + current-speed = <9600>; + interrupts = <42 2>; + interrupt-parent = <&mpic>; + }; + + global-utilities@e0000 { // global utilities reg + compatible = "fsl,mpc8548-guts"; + reg = <0xe0000 0x1000>; + fsl,has-rstcr; + }; + + mpic: pic@40000 { + interrupt-controller; + #address-cells = <0>; + #interrupt-cells = <2>; + reg = <0x40000 0x40000>; + compatible = "chrp,open-pic"; + device_type = "open-pic"; + }; + }; + + localbus@ef005000 { + compatible = "fsl,mpc8548-localbus", "fsl,pq3-localbus", + "simple-bus"; + #address-cells = <2>; + #size-cells = <1>; + reg = <0xef005000 0x100>; // BRx, ORx, etc. + interrupt-parent = <&mpic>; + interrupts = <19 2>; + + ranges = < + 0 0x0 0xf8000000 0x08000000 // NOR boot flash + 1 0x0 0xf0000000 0x08000000 // NOR expansion flash + 2 0x0 0xe8000000 0x00010000 // NAND CE1 + 3 0x0 0xe8010000 0x00010000 // NAND CE2 + >; + + nor-boot@0,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "cfi-flash"; + reg = <0 0x0 0x4000000>; + bank-width = <2>; + + partition@0 { + label = "Primary OS"; + reg = <0x00000000 0x180000>; + }; + partition@180000 { + label = "Secondary OS"; + reg = <0x00180000 0x180000>; + }; + partition@300000 { + label = "User"; + reg = <0x00300000 0x3c80000>; + }; + partition@3f80000 { + label = "Boot firmware"; + reg = <0x03f80000 0x80000>; + }; + }; + + nor-alternate@1,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "cfi-flash"; + reg = <1 0x0 0x4000000>; + bank-width = <2>; + + partition@0 { + label = "Filesystem"; + reg = <0x00000000 0x3f80000>; + }; + partition@3f80000 { + label = "Alternate boot firmware"; + reg = <0x03f80000 0x80000>; + }; + }; + + nand@2,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "xes,address-ctl-nand"; + reg = <2 0x0 0x10000>; + cle-line = <0x8>; /* CLE tied to A3 */ + ale-line = <0x10>; /* ALE tied to A4 */ + + partition@0 { + label = "NAND Filesystem"; + reg = <0 0x40000000>; + }; + }; + }; + + /* PMC interface */ + pci0: pci@ef008000 { + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + compatible = "fsl,mpc8540-pcix", "fsl,mpc8540-pci"; + device_type = "pci"; + reg = <0xef008000 0x1000>; + clock-frequency = <33333333>; + interrupt-map-mask = <0xf800 0x0 0x0 0x7>; + interrupt-map = < + /* IDSEL */ + 0xe000 0 0 1 &mpic 2 1 + 0xe000 0 0 2 &mpic 3 1>; + + interrupt-parent = <&mpic>; + interrupts = <24 2>; + bus-range = <0 0>; + ranges = <0x02000000 0 0x80000000 0x80000000 0 0x20000000 + 0x01000000 0 0x00000000 0xd0000000 0 0x01000000>; + }; + + /* XMC PCIe */ + pci1: pcie@ef00a000 { + interrupt-map-mask = <0xf800 0x0 0x0 0x7>; + interrupt-map = < + /* IDSEL 0x0 */ + 0x00000 0 0 1 &mpic 0 1 + 0x00000 0 0 2 &mpic 1 1 + 0x00000 0 0 3 &mpic 2 1 + 0x00000 0 0 4 &mpic 3 1>; + + interrupt-parent = <&mpic>; + interrupts = <26 2>; + bus-range = <0 0xff>; + ranges = <0x02000000 0 0xa0000000 0xa0000000 0 0x20000000 + 0x01000000 0 0x00000000 0xd1000000 0 0x01000000>; + clock-frequency = <33333333>; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + reg = <0xef00a000 0x1000>; + compatible = "fsl,mpc8548-pcie"; + device_type = "pci"; + pcie@0 { + reg = <0 0 0 0 0>; + #size-cells = <2>; + #address-cells = <3>; + device_type = "pci"; + ranges = <0x02000000 0 0xc0000000 0x02000000 0 + 0xc0000000 0 0x20000000 + 0x01000000 0 0x00000000 0x01000000 0 + 0x00000000 0 0x08000000>; + }; + }; + + /* Needed for dtbImage boot wrapper compatibility */ + chosen { + linux,stdout-path = &serial0; + }; +}; diff --git a/arch/powerpc/boot/dts/xpedite5301.dts b/arch/powerpc/boot/dts/xpedite5301.dts new file mode 100644 index 000000000..04cb410da --- /dev/null +++ b/arch/powerpc/boot/dts/xpedite5301.dts @@ -0,0 +1,640 @@ +/* + * Copyright (C) 2008 Extreme Engineering Solutions, Inc. + * Based on MPC8572DS device tree from Freescale Semiconductor, Inc. + * + * XPedite5301 PMC/XMC module based on MPC8572E + * + * This is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +/dts-v1/; +/ { + model = "xes,xpedite5301"; + compatible = "xes,xpedite5301", "xes,MPC8572"; + #address-cells = <2>; + #size-cells = <2>; + form-factor = "PMC/XMC"; + boot-bank = <0x0>; /* 0: Primary flash, 1: Secondary flash */ + + aliases { + ethernet0 = &enet0; + ethernet1 = &enet1; + serial0 = &serial0; + serial1 = &serial1; + pci1 = &pci1; + pci2 = &pci2; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + PowerPC,8572@0 { + device_type = "cpu"; + reg = <0x0>; + d-cache-line-size = <32>; // 32 bytes + i-cache-line-size = <32>; // 32 bytes + d-cache-size = <0x8000>; // L1, 32K + i-cache-size = <0x8000>; // L1, 32K + timebase-frequency = <0>; + bus-frequency = <0>; + clock-frequency = <0>; + next-level-cache = <&L2>; + }; + + PowerPC,8572@1 { + device_type = "cpu"; + reg = <0x1>; + d-cache-line-size = <32>; // 32 bytes + i-cache-line-size = <32>; // 32 bytes + d-cache-size = <0x8000>; // L1, 32K + i-cache-size = <0x8000>; // L1, 32K + timebase-frequency = <0>; + bus-frequency = <0>; + clock-frequency = <0>; + next-level-cache = <&L2>; + }; + }; + + memory { + device_type = "memory"; + reg = <0x0 0x0 0x0 0x0>; // Filled in by U-Boot + }; + + localbus@ef005000 { + #address-cells = <2>; + #size-cells = <1>; + compatible = "fsl,mpc8572-elbc", "fsl,elbc", "simple-bus"; + reg = <0 0xef005000 0 0x1000>; + interrupts = <19 2>; + interrupt-parent = <&mpic>; + /* Local bus region mappings */ + ranges = <0 0 0 0xf8000000 0x8000000 /* CS0: Boot flash */ + 1 0 0 0xf0000000 0x8000000 /* CS1: Alternate flash */ + 2 0 0 0xef800000 0x40000 /* CS2: NAND CE1 */ + 3 0 0 0xef840000 0x40000>; /* CS3: NAND CE2 */ + + nor-boot@0,0 { + compatible = "amd,s29gl01gp", "cfi-flash"; + bank-width = <2>; + reg = <0 0 0x8000000>; /* 128MB */ + #address-cells = <1>; + #size-cells = <1>; + partition@0 { + label = "Primary user space"; + reg = <0x00000000 0x6f00000>; /* 111 MB */ + }; + partition@6f00000 { + label = "Primary kernel"; + reg = <0x6f00000 0x1000000>; /* 16 MB */ + }; + partition@7f00000 { + label = "Primary DTB"; + reg = <0x7f00000 0x40000>; /* 256 KB */ + }; + partition@7f40000 { + label = "Primary U-Boot environment"; + reg = <0x7f40000 0x40000>; /* 256 KB */ + }; + partition@7f80000 { + label = "Primary U-Boot"; + reg = <0x7f80000 0x80000>; /* 512 KB */ + read-only; + }; + }; + + nor-alternate@1,0 { + compatible = "amd,s29gl01gp", "cfi-flash"; + bank-width = <2>; + //reg = <0xf0000000 0x08000000>; /* 128MB */ + reg = <1 0 0x8000000>; /* 128MB */ + #address-cells = <1>; + #size-cells = <1>; + partition@0 { + label = "Secondary user space"; + reg = <0x00000000 0x6f00000>; /* 111 MB */ + }; + partition@6f00000 { + label = "Secondary kernel"; + reg = <0x6f00000 0x1000000>; /* 16 MB */ + }; + partition@7f00000 { + label = "Secondary DTB"; + reg = <0x7f00000 0x40000>; /* 256 KB */ + }; + partition@7f40000 { + label = "Secondary U-Boot environment"; + reg = <0x7f40000 0x40000>; /* 256 KB */ + }; + partition@7f80000 { + label = "Secondary U-Boot"; + reg = <0x7f80000 0x80000>; /* 512 KB */ + read-only; + }; + }; + + nand@2,0 { + #address-cells = <1>; + #size-cells = <1>; + /* + * Actual part could be ST Micro NAND08GW3B2A (1 GB), + * Micron MT29F8G08DAA (2x 512 MB), or Micron + * MT29F16G08FAA (2x 1 GB), depending on the build + * configuration + */ + compatible = "fsl,mpc8572-fcm-nand", + "fsl,elbc-fcm-nand"; + reg = <2 0 0x40000>; + /* U-Boot should fix this up if chip size > 1 GB */ + partition@0 { + label = "NAND Filesystem"; + reg = <0 0x40000000>; + }; + }; + + }; + + soc8572@ef000000 { + #address-cells = <1>; + #size-cells = <1>; + device_type = "soc"; + compatible = "fsl,mpc8572-immr", "simple-bus"; + ranges = <0x0 0 0xef000000 0x100000>; + bus-frequency = <0>; // Filled out by uboot. + + ecm-law@0 { + compatible = "fsl,ecm-law"; + reg = <0x0 0x1000>; + fsl,num-laws = <12>; + }; + + ecm@1000 { + compatible = "fsl,mpc8572-ecm", "fsl,ecm"; + reg = <0x1000 0x1000>; + interrupts = <17 2>; + interrupt-parent = <&mpic>; + }; + + memory-controller@2000 { + compatible = "fsl,mpc8572-memory-controller"; + reg = <0x2000 0x1000>; + interrupt-parent = <&mpic>; + interrupts = <18 2>; + }; + + memory-controller@6000 { + compatible = "fsl,mpc8572-memory-controller"; + reg = <0x6000 0x1000>; + interrupt-parent = <&mpic>; + interrupts = <18 2>; + }; + + L2: l2-cache-controller@20000 { + compatible = "fsl,mpc8572-l2-cache-controller"; + reg = <0x20000 0x1000>; + cache-line-size = <32>; // 32 bytes + cache-size = <0x100000>; // L2, 1M + interrupt-parent = <&mpic>; + interrupts = <16 2>; + }; + + i2c@3000 { + #address-cells = <1>; + #size-cells = <0>; + cell-index = <0>; + compatible = "fsl-i2c"; + reg = <0x3000 0x100>; + interrupts = <43 2>; + interrupt-parent = <&mpic>; + dfsrr; + + temp-sensor@48 { + compatible = "dallas,ds1631", "dallas,ds1621"; + reg = <0x48>; + }; + + temp-sensor@4c { + compatible = "adi,adt7461"; + reg = <0x4c>; + }; + + cpu-supervisor@51 { + compatible = "dallas,ds4510"; + reg = <0x51>; + }; + + eeprom@54 { + compatible = "atmel,at24c128b"; + reg = <0x54>; + }; + + rtc@68 { + compatible = "stm,m41t00", + "dallas,ds1338"; + reg = <0x68>; + }; + + pcie-switch@70 { + compatible = "plx,pex8518"; + reg = <0x70>; + }; + + gpio1: gpio@18 { + compatible = "nxp,pca9557"; + reg = <0x18>; + #gpio-cells = <2>; + gpio-controller; + polarity = <0x00>; + }; + + gpio2: gpio@1c { + compatible = "nxp,pca9557"; + reg = <0x1c>; + #gpio-cells = <2>; + gpio-controller; + polarity = <0x00>; + }; + + gpio3: gpio@1e { + compatible = "nxp,pca9557"; + reg = <0x1e>; + #gpio-cells = <2>; + gpio-controller; + polarity = <0x00>; + }; + + gpio4: gpio@1f { + compatible = "nxp,pca9557"; + reg = <0x1f>; + #gpio-cells = <2>; + gpio-controller; + polarity = <0x00>; + }; + }; + + i2c@3100 { + #address-cells = <1>; + #size-cells = <0>; + cell-index = <1>; + compatible = "fsl-i2c"; + reg = <0x3100 0x100>; + interrupts = <43 2>; + interrupt-parent = <&mpic>; + dfsrr; + }; + + dma@c300 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,mpc8572-dma", "fsl,eloplus-dma"; + reg = <0xc300 0x4>; + ranges = <0x0 0xc100 0x200>; + cell-index = <1>; + dma-channel@0 { + compatible = "fsl,mpc8572-dma-channel", + "fsl,eloplus-dma-channel"; + reg = <0x0 0x80>; + cell-index = <0>; + interrupt-parent = <&mpic>; + interrupts = <76 2>; + }; + dma-channel@80 { + compatible = "fsl,mpc8572-dma-channel", + "fsl,eloplus-dma-channel"; + reg = <0x80 0x80>; + cell-index = <1>; + interrupt-parent = <&mpic>; + interrupts = <77 2>; + }; + dma-channel@100 { + compatible = "fsl,mpc8572-dma-channel", + "fsl,eloplus-dma-channel"; + reg = <0x100 0x80>; + cell-index = <2>; + interrupt-parent = <&mpic>; + interrupts = <78 2>; + }; + dma-channel@180 { + compatible = "fsl,mpc8572-dma-channel", + "fsl,eloplus-dma-channel"; + reg = <0x180 0x80>; + cell-index = <3>; + interrupt-parent = <&mpic>; + interrupts = <79 2>; + }; + }; + + dma@21300 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,mpc8572-dma", "fsl,eloplus-dma"; + reg = <0x21300 0x4>; + ranges = <0x0 0x21100 0x200>; + cell-index = <0>; + dma-channel@0 { + compatible = "fsl,mpc8572-dma-channel", + "fsl,eloplus-dma-channel"; + reg = <0x0 0x80>; + cell-index = <0>; + interrupt-parent = <&mpic>; + interrupts = <20 2>; + }; + dma-channel@80 { + compatible = "fsl,mpc8572-dma-channel", + "fsl,eloplus-dma-channel"; + reg = <0x80 0x80>; + cell-index = <1>; + interrupt-parent = <&mpic>; + interrupts = <21 2>; + }; + dma-channel@100 { + compatible = "fsl,mpc8572-dma-channel", + "fsl,eloplus-dma-channel"; + reg = <0x100 0x80>; + cell-index = <2>; + interrupt-parent = <&mpic>; + interrupts = <22 2>; + }; + dma-channel@180 { + compatible = "fsl,mpc8572-dma-channel", + "fsl,eloplus-dma-channel"; + reg = <0x180 0x80>; + cell-index = <3>; + interrupt-parent = <&mpic>; + interrupts = <23 2>; + }; + }; + + /* eTSEC 1 */ + enet0: ethernet@24000 { + #address-cells = <1>; + #size-cells = <1>; + cell-index = <0>; + device_type = "network"; + model = "eTSEC"; + compatible = "gianfar"; + reg = <0x24000 0x1000>; + ranges = <0x0 0x24000 0x1000>; + local-mac-address = [ 00 00 00 00 00 00 ]; + interrupts = <29 2 30 2 34 2>; + interrupt-parent = <&mpic>; + tbi-handle = <&tbi0>; + phy-handle = <&phy0>; + phy-connection-type = "sgmii"; + + mdio@520 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,gianfar-mdio"; + reg = <0x520 0x20>; + + phy0: ethernet-phy@1 { + interrupt-parent = <&mpic>; + interrupts = <8 1>; + reg = <0x1>; + }; + phy1: ethernet-phy@2 { + interrupt-parent = <&mpic>; + interrupts = <8 1>; + reg = <0x2>; + }; + tbi0: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + }; + + /* eTSEC 2 */ + enet1: ethernet@25000 { + #address-cells = <1>; + #size-cells = <1>; + cell-index = <1>; + device_type = "network"; + model = "eTSEC"; + compatible = "gianfar"; + reg = <0x25000 0x1000>; + ranges = <0x0 0x25000 0x1000>; + local-mac-address = [ 00 00 00 00 00 00 ]; + interrupts = <35 2 36 2 40 2>; + interrupt-parent = <&mpic>; + tbi-handle = <&tbi1>; + phy-handle = <&phy1>; + phy-connection-type = "sgmii"; + + mdio@520 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,gianfar-tbi"; + reg = <0x520 0x20>; + + tbi1: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + }; + + /* UART0 */ + serial0: serial@4500 { + cell-index = <0>; + device_type = "serial"; + compatible = "fsl,ns16550", "ns16550"; + reg = <0x4500 0x100>; + clock-frequency = <0>; + interrupts = <42 2>; + interrupt-parent = <&mpic>; + }; + + /* UART1 */ + serial1: serial@4600 { + cell-index = <1>; + device_type = "serial"; + compatible = "fsl,ns16550", "ns16550"; + reg = <0x4600 0x100>; + clock-frequency = <0>; + interrupts = <42 2>; + interrupt-parent = <&mpic>; + }; + + global-utilities@e0000 { //global utilities block + compatible = "fsl,mpc8572-guts"; + reg = <0xe0000 0x1000>; + fsl,has-rstcr; + }; + + msi@41600 { + compatible = "fsl,mpc8572-msi", "fsl,mpic-msi"; + reg = <0x41600 0x80>; + msi-available-ranges = <0 0x100>; + interrupts = < + 0xe0 0 + 0xe1 0 + 0xe2 0 + 0xe3 0 + 0xe4 0 + 0xe5 0 + 0xe6 0 + 0xe7 0>; + interrupt-parent = <&mpic>; + }; + + crypto@30000 { + compatible = "fsl,sec3.0", "fsl,sec2.4", "fsl,sec2.2", + "fsl,sec2.1", "fsl,sec2.0"; + reg = <0x30000 0x10000>; + interrupts = <45 2 58 2>; + interrupt-parent = <&mpic>; + fsl,num-channels = <4>; + fsl,channel-fifo-len = <24>; + fsl,exec-units-mask = <0x9fe>; + fsl,descriptor-types-mask = <0x3ab0ebf>; + }; + + mpic: pic@40000 { + interrupt-controller; + #address-cells = <0>; + #interrupt-cells = <2>; + reg = <0x40000 0x40000>; + compatible = "chrp,open-pic"; + device_type = "open-pic"; + }; + + gpio0: gpio@f000 { + compatible = "fsl,mpc8572-gpio"; + reg = <0xf000 0x1000>; + interrupts = <47 2>; + interrupt-parent = <&mpic>; + #gpio-cells = <2>; + gpio-controller; + }; + + gpio-leds { + compatible = "gpio-leds"; + + heartbeat { + label = "Heartbeat"; + gpios = <&gpio0 4 1>; + linux,default-trigger = "heartbeat"; + }; + + yellow { + label = "Yellow"; + gpios = <&gpio0 5 1>; + }; + + red { + label = "Red"; + gpios = <&gpio0 6 1>; + }; + + green { + label = "Green"; + gpios = <&gpio0 7 1>; + }; + }; + + /* PME (pattern-matcher) */ + pme@10000 { + compatible = "fsl,mpc8572-pme", "pme8572"; + reg = <0x10000 0x5000>; + interrupts = <57 2 64 2 65 2 66 2 67 2>; + interrupt-parent = <&mpic>; + }; + + tlu@2f000 { + compatible = "fsl,mpc8572-tlu", "fsl_tlu"; + reg = <0x2f000 0x1000>; + interrupts = <61 2>; + interrupt-parent = <&mpic>; + }; + + tlu@15000 { + compatible = "fsl,mpc8572-tlu", "fsl_tlu"; + reg = <0x15000 0x1000>; + interrupts = <75 2>; + interrupt-parent = <&mpic>; + }; + }; + + /* + * PCI Express controller 3 @ ef008000 is not used. + * This would have been pci0 on other mpc85xx platforms. + */ + + /* PCI Express controller 2, wired to XMC P15 connector */ + pci1: pcie@ef009000 { + compatible = "fsl,mpc8548-pcie"; + device_type = "pci"; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + reg = <0 0xef009000 0 0x1000>; + bus-range = <0 255>; + ranges = <0x2000000 0x0 0xc0000000 0 0xc0000000 0x0 0x10000000 + 0x1000000 0x0 0x00000000 0 0xe8800000 0x0 0x00010000>; + clock-frequency = <33333333>; + interrupt-parent = <&mpic>; + interrupts = <25 2>; + interrupt-map-mask = <0xf800 0x0 0x0 0x7>; + interrupt-map = < + /* IDSEL 0x0 */ + 0x0 0x0 0x0 0x1 &mpic 0x4 0x1 + 0x0 0x0 0x0 0x2 &mpic 0x5 0x1 + 0x0 0x0 0x0 0x3 &mpic 0x6 0x1 + 0x0 0x0 0x0 0x4 &mpic 0x7 0x1 + >; + pcie@0 { + reg = <0x00000000 0x00000000 0x00000000 0x00000000 0x00000000>; + #size-cells = <2>; + #address-cells = <3>; + device_type = "pci"; + ranges = <0x2000000 0x0 0xc0000000 + 0x2000000 0x0 0xc0000000 + 0x0 0x10000000 + + 0x1000000 0x0 0x0 + 0x1000000 0x0 0x0 + 0x0 0x100000>; + }; + }; + + /* PCI Express controller 1, wired to PEX8112 for PMC interface */ + pci2: pcie@ef00a000 { + compatible = "fsl,mpc8548-pcie"; + device_type = "pci"; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + reg = <0 0xef00a000 0 0x1000>; + bus-range = <0 255>; + ranges = <0x2000000 0x0 0x80000000 0 0x80000000 0x0 0x40000000 + 0x1000000 0x0 0x00000000 0 0xe8000000 0x0 0x10000>; + clock-frequency = <33333333>; + interrupt-parent = <&mpic>; + interrupts = <26 2>; + interrupt-map-mask = <0xf800 0x0 0x0 0x7>; + interrupt-map = < + /* IDSEL 0x0 */ + 0x0 0x0 0x0 0x1 &mpic 0x0 0x1 + 0x0 0x0 0x0 0x2 &mpic 0x1 0x1 + 0x0 0x0 0x0 0x3 &mpic 0x2 0x1 + 0x0 0x0 0x0 0x4 &mpic 0x3 0x1 + >; + pcie@0 { + reg = <0x0 0x0 0x0 0x0 0x0>; + #size-cells = <2>; + #address-cells = <3>; + device_type = "pci"; + ranges = <0x2000000 0x0 0x80000000 + 0x2000000 0x0 0x80000000 + 0x0 0x40000000 + + 0x1000000 0x0 0x0 + 0x1000000 0x0 0x0 + 0x0 0x100000>; + }; + }; +}; diff --git a/arch/powerpc/boot/dts/xpedite5330.dts b/arch/powerpc/boot/dts/xpedite5330.dts new file mode 100644 index 000000000..73f8620f1 --- /dev/null +++ b/arch/powerpc/boot/dts/xpedite5330.dts @@ -0,0 +1,707 @@ +/* + * Copyright (C) 2008 Extreme Engineering Solutions, Inc. + * Based on MPC8572DS device tree from Freescale Semiconductor, Inc. + * + * XPedite5330 3U CompactPCI module based on MPC8572E + * + * This is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +/dts-v1/; +/ { + model = "xes,xpedite5330"; + compatible = "xes,xpedite5330", "xes,MPC8572"; + #address-cells = <2>; + #size-cells = <2>; + form-factor = "3U CompactPCI"; + boot-bank = <0x0>; /* 0: Primary flash, 1: Secondary flash */ + + aliases { + ethernet0 = &enet0; + ethernet1 = &enet1; + serial0 = &serial0; + serial1 = &serial1; + pci0 = &pci0; + pci1 = &pci1; + pci2 = &pci2; + }; + + pmcslots { + #address-cells = <1>; + #size-cells = <0>; + + pmcslot@0 { + cell-index = <0>; + /* + * boolean properties (true if defined): + * monarch; + * module-present; + */ + }; + }; + + xmcslots { + #address-cells = <1>; + #size-cells = <0>; + + xmcslot@0 { + cell-index = <0>; + /* + * boolean properties (true if defined): + * module-present; + */ + }; + }; + + cpci { + /* + * boolean properties (true if defined): + * system-controller; + */ + system-controller; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + PowerPC,8572@0 { + device_type = "cpu"; + reg = <0x0>; + d-cache-line-size = <32>; // 32 bytes + i-cache-line-size = <32>; // 32 bytes + d-cache-size = <0x8000>; // L1, 32K + i-cache-size = <0x8000>; // L1, 32K + timebase-frequency = <0>; + bus-frequency = <0>; + clock-frequency = <0>; + next-level-cache = <&L2>; + }; + + PowerPC,8572@1 { + device_type = "cpu"; + reg = <0x1>; + d-cache-line-size = <32>; // 32 bytes + i-cache-line-size = <32>; // 32 bytes + d-cache-size = <0x8000>; // L1, 32K + i-cache-size = <0x8000>; // L1, 32K + timebase-frequency = <0>; + bus-frequency = <0>; + clock-frequency = <0>; + next-level-cache = <&L2>; + }; + }; + + memory { + device_type = "memory"; + reg = <0x0 0x0 0x0 0x0>; // Filled in by U-Boot + }; + + localbus@ef005000 { + #address-cells = <2>; + #size-cells = <1>; + compatible = "fsl,mpc8572-elbc", "fsl,elbc", "simple-bus"; + reg = <0 0xef005000 0 0x1000>; + interrupts = <19 2>; + interrupt-parent = <&mpic>; + /* Local bus region mappings */ + ranges = <0 0 0 0xf8000000 0x8000000 /* CS0: Boot flash */ + 1 0 0 0xf0000000 0x8000000 /* CS1: Alternate flash */ + 2 0 0 0xef800000 0x40000 /* CS2: NAND CE1 */ + 3 0 0 0xef840000 0x40000>; /* CS3: NAND CE2 */ + + nor-boot@0,0 { + compatible = "amd,s29gl01gp", "cfi-flash"; + bank-width = <2>; + reg = <0 0 0x8000000>; /* 128MB */ + #address-cells = <1>; + #size-cells = <1>; + partition@0 { + label = "Primary user space"; + reg = <0x00000000 0x6f00000>; /* 111 MB */ + }; + partition@6f00000 { + label = "Primary kernel"; + reg = <0x6f00000 0x1000000>; /* 16 MB */ + }; + partition@7f00000 { + label = "Primary DTB"; + reg = <0x7f00000 0x40000>; /* 256 KB */ + }; + partition@7f40000 { + label = "Primary U-Boot environment"; + reg = <0x7f40000 0x40000>; /* 256 KB */ + }; + partition@7f80000 { + label = "Primary U-Boot"; + reg = <0x7f80000 0x80000>; /* 512 KB */ + read-only; + }; + }; + + nor-alternate@1,0 { + compatible = "amd,s29gl01gp", "cfi-flash"; + bank-width = <2>; + //reg = <0xf0000000 0x08000000>; /* 128MB */ + reg = <1 0 0x8000000>; /* 128MB */ + #address-cells = <1>; + #size-cells = <1>; + partition@0 { + label = "Secondary user space"; + reg = <0x00000000 0x6f00000>; /* 111 MB */ + }; + partition@6f00000 { + label = "Secondary kernel"; + reg = <0x6f00000 0x1000000>; /* 16 MB */ + }; + partition@7f00000 { + label = "Secondary DTB"; + reg = <0x7f00000 0x40000>; /* 256 KB */ + }; + partition@7f40000 { + label = "Secondary U-Boot environment"; + reg = <0x7f40000 0x40000>; /* 256 KB */ + }; + partition@7f80000 { + label = "Secondary U-Boot"; + reg = <0x7f80000 0x80000>; /* 512 KB */ + read-only; + }; + }; + + nand@2,0 { + #address-cells = <1>; + #size-cells = <1>; + /* + * Actual part could be ST Micro NAND08GW3B2A (1 GB), + * Micron MT29F8G08DAA (2x 512 MB), or Micron + * MT29F16G08FAA (2x 1 GB), depending on the build + * configuration + */ + compatible = "fsl,mpc8572-fcm-nand", + "fsl,elbc-fcm-nand"; + reg = <2 0 0x40000>; + /* U-Boot should fix this up if chip size > 1 GB */ + partition@0 { + label = "NAND Filesystem"; + reg = <0 0x40000000>; + }; + }; + + }; + + soc8572@ef000000 { + #address-cells = <1>; + #size-cells = <1>; + device_type = "soc"; + compatible = "fsl,mpc8572-immr", "simple-bus"; + ranges = <0x0 0 0xef000000 0x100000>; + bus-frequency = <0>; // Filled out by uboot. + + ecm-law@0 { + compatible = "fsl,ecm-law"; + reg = <0x0 0x1000>; + fsl,num-laws = <12>; + }; + + ecm@1000 { + compatible = "fsl,mpc8572-ecm", "fsl,ecm"; + reg = <0x1000 0x1000>; + interrupts = <17 2>; + interrupt-parent = <&mpic>; + }; + + memory-controller@2000 { + compatible = "fsl,mpc8572-memory-controller"; + reg = <0x2000 0x1000>; + interrupt-parent = <&mpic>; + interrupts = <18 2>; + }; + + memory-controller@6000 { + compatible = "fsl,mpc8572-memory-controller"; + reg = <0x6000 0x1000>; + interrupt-parent = <&mpic>; + interrupts = <18 2>; + }; + + L2: l2-cache-controller@20000 { + compatible = "fsl,mpc8572-l2-cache-controller"; + reg = <0x20000 0x1000>; + cache-line-size = <32>; // 32 bytes + cache-size = <0x100000>; // L2, 1M + interrupt-parent = <&mpic>; + interrupts = <16 2>; + }; + + i2c@3000 { + #address-cells = <1>; + #size-cells = <0>; + cell-index = <0>; + compatible = "fsl-i2c"; + reg = <0x3000 0x100>; + interrupts = <43 2>; + interrupt-parent = <&mpic>; + dfsrr; + + temp-sensor@48 { + compatible = "dallas,ds1631", "dallas,ds1621"; + reg = <0x48>; + }; + + temp-sensor@4c { + compatible = "adi,adt7461"; + reg = <0x4c>; + }; + + cpu-supervisor@51 { + compatible = "dallas,ds4510"; + reg = <0x51>; + }; + + eeprom@54 { + compatible = "atmel,at24c128b"; + reg = <0x54>; + }; + + rtc@68 { + compatible = "stm,m41t00", + "dallas,ds1338"; + reg = <0x68>; + }; + + pcie-switch@70 { + compatible = "plx,pex8518"; + reg = <0x70>; + }; + + gpio1: gpio@18 { + compatible = "nxp,pca9557"; + reg = <0x18>; + #gpio-cells = <2>; + gpio-controller; + polarity = <0x00>; + }; + + gpio2: gpio@1c { + compatible = "nxp,pca9557"; + reg = <0x1c>; + #gpio-cells = <2>; + gpio-controller; + polarity = <0x00>; + }; + + gpio3: gpio@1e { + compatible = "nxp,pca9557"; + reg = <0x1e>; + #gpio-cells = <2>; + gpio-controller; + polarity = <0x00>; + }; + + gpio4: gpio@1f { + compatible = "nxp,pca9557"; + reg = <0x1f>; + #gpio-cells = <2>; + gpio-controller; + polarity = <0x00>; + }; + }; + + i2c@3100 { + #address-cells = <1>; + #size-cells = <0>; + cell-index = <1>; + compatible = "fsl-i2c"; + reg = <0x3100 0x100>; + interrupts = <43 2>; + interrupt-parent = <&mpic>; + dfsrr; + }; + + dma@c300 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,mpc8572-dma", "fsl,eloplus-dma"; + reg = <0xc300 0x4>; + ranges = <0x0 0xc100 0x200>; + cell-index = <1>; + dma-channel@0 { + compatible = "fsl,mpc8572-dma-channel", + "fsl,eloplus-dma-channel"; + reg = <0x0 0x80>; + cell-index = <0>; + interrupt-parent = <&mpic>; + interrupts = <76 2>; + }; + dma-channel@80 { + compatible = "fsl,mpc8572-dma-channel", + "fsl,eloplus-dma-channel"; + reg = <0x80 0x80>; + cell-index = <1>; + interrupt-parent = <&mpic>; + interrupts = <77 2>; + }; + dma-channel@100 { + compatible = "fsl,mpc8572-dma-channel", + "fsl,eloplus-dma-channel"; + reg = <0x100 0x80>; + cell-index = <2>; + interrupt-parent = <&mpic>; + interrupts = <78 2>; + }; + dma-channel@180 { + compatible = "fsl,mpc8572-dma-channel", + "fsl,eloplus-dma-channel"; + reg = <0x180 0x80>; + cell-index = <3>; + interrupt-parent = <&mpic>; + interrupts = <79 2>; + }; + }; + + dma@21300 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,mpc8572-dma", "fsl,eloplus-dma"; + reg = <0x21300 0x4>; + ranges = <0x0 0x21100 0x200>; + cell-index = <0>; + dma-channel@0 { + compatible = "fsl,mpc8572-dma-channel", + "fsl,eloplus-dma-channel"; + reg = <0x0 0x80>; + cell-index = <0>; + interrupt-parent = <&mpic>; + interrupts = <20 2>; + }; + dma-channel@80 { + compatible = "fsl,mpc8572-dma-channel", + "fsl,eloplus-dma-channel"; + reg = <0x80 0x80>; + cell-index = <1>; + interrupt-parent = <&mpic>; + interrupts = <21 2>; + }; + dma-channel@100 { + compatible = "fsl,mpc8572-dma-channel", + "fsl,eloplus-dma-channel"; + reg = <0x100 0x80>; + cell-index = <2>; + interrupt-parent = <&mpic>; + interrupts = <22 2>; + }; + dma-channel@180 { + compatible = "fsl,mpc8572-dma-channel", + "fsl,eloplus-dma-channel"; + reg = <0x180 0x80>; + cell-index = <3>; + interrupt-parent = <&mpic>; + interrupts = <23 2>; + }; + }; + + /* eTSEC 1 */ + enet0: ethernet@24000 { + #address-cells = <1>; + #size-cells = <1>; + cell-index = <0>; + device_type = "network"; + model = "eTSEC"; + compatible = "gianfar"; + reg = <0x24000 0x1000>; + ranges = <0x0 0x24000 0x1000>; + local-mac-address = [ 00 00 00 00 00 00 ]; + interrupts = <29 2 30 2 34 2>; + interrupt-parent = <&mpic>; + tbi-handle = <&tbi0>; + phy-handle = <&phy0>; + phy-connection-type = "sgmii"; + + mdio@520 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,gianfar-mdio"; + reg = <0x520 0x20>; + + phy0: ethernet-phy@1 { + interrupt-parent = <&mpic>; + interrupts = <8 1>; + reg = <0x1>; + }; + phy1: ethernet-phy@2 { + interrupt-parent = <&mpic>; + interrupts = <8 1>; + reg = <0x2>; + }; + tbi0: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + }; + + /* eTSEC 2 */ + enet1: ethernet@25000 { + #address-cells = <1>; + #size-cells = <1>; + cell-index = <1>; + device_type = "network"; + model = "eTSEC"; + compatible = "gianfar"; + reg = <0x25000 0x1000>; + ranges = <0x0 0x25000 0x1000>; + local-mac-address = [ 00 00 00 00 00 00 ]; + interrupts = <35 2 36 2 40 2>; + interrupt-parent = <&mpic>; + tbi-handle = <&tbi1>; + phy-handle = <&phy1>; + phy-connection-type = "sgmii"; + + mdio@520 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,gianfar-tbi"; + reg = <0x520 0x20>; + + tbi1: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + }; + + /* UART0 */ + serial0: serial@4500 { + cell-index = <0>; + device_type = "serial"; + compatible = "fsl,ns16550", "ns16550"; + reg = <0x4500 0x100>; + clock-frequency = <0>; + interrupts = <42 2>; + interrupt-parent = <&mpic>; + }; + + /* UART1 */ + serial1: serial@4600 { + cell-index = <1>; + device_type = "serial"; + compatible = "fsl,ns16550", "ns16550"; + reg = <0x4600 0x100>; + clock-frequency = <0>; + interrupts = <42 2>; + interrupt-parent = <&mpic>; + }; + + global-utilities@e0000 { //global utilities block + compatible = "fsl,mpc8572-guts"; + reg = <0xe0000 0x1000>; + fsl,has-rstcr; + }; + + msi@41600 { + compatible = "fsl,mpc8572-msi", "fsl,mpic-msi"; + reg = <0x41600 0x80>; + msi-available-ranges = <0 0x100>; + interrupts = < + 0xe0 0 + 0xe1 0 + 0xe2 0 + 0xe3 0 + 0xe4 0 + 0xe5 0 + 0xe6 0 + 0xe7 0>; + interrupt-parent = <&mpic>; + }; + + crypto@30000 { + compatible = "fsl,sec3.0", "fsl,sec2.4", "fsl,sec2.2", + "fsl,sec2.1", "fsl,sec2.0"; + reg = <0x30000 0x10000>; + interrupts = <45 2 58 2>; + interrupt-parent = <&mpic>; + fsl,num-channels = <4>; + fsl,channel-fifo-len = <24>; + fsl,exec-units-mask = <0x9fe>; + fsl,descriptor-types-mask = <0x3ab0ebf>; + }; + + mpic: pic@40000 { + interrupt-controller; + #address-cells = <0>; + #interrupt-cells = <2>; + reg = <0x40000 0x40000>; + compatible = "chrp,open-pic"; + device_type = "open-pic"; + }; + + gpio0: gpio@f000 { + compatible = "fsl,mpc8572-gpio"; + reg = <0xf000 0x1000>; + interrupts = <47 2>; + interrupt-parent = <&mpic>; + #gpio-cells = <2>; + gpio-controller; + }; + + gpio-leds { + compatible = "gpio-leds"; + + heartbeat { + label = "Heartbeat"; + gpios = <&gpio0 4 1>; + linux,default-trigger = "heartbeat"; + }; + + yellow { + label = "Yellow"; + gpios = <&gpio0 5 1>; + }; + + red { + label = "Red"; + gpios = <&gpio0 6 1>; + }; + + green { + label = "Green"; + gpios = <&gpio0 7 1>; + }; + }; + + /* PME (pattern-matcher) */ + pme@10000 { + compatible = "fsl,mpc8572-pme", "pme8572"; + reg = <0x10000 0x5000>; + interrupts = <57 2 64 2 65 2 66 2 67 2>; + interrupt-parent = <&mpic>; + }; + + tlu@2f000 { + compatible = "fsl,mpc8572-tlu", "fsl_tlu"; + reg = <0x2f000 0x1000>; + interrupts = <61 2>; + interrupt-parent = <&mpic>; + }; + + tlu@15000 { + compatible = "fsl,mpc8572-tlu", "fsl_tlu"; + reg = <0x15000 0x1000>; + interrupts = <75 2>; + interrupt-parent = <&mpic>; + }; + }; + + /* PCI Express controller 3 - CompactPCI bus via PEX8112 bridge */ + pci0: pcie@ef008000 { + compatible = "fsl,mpc8548-pcie"; + device_type = "pci"; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + reg = <0 0xef008000 0 0x1000>; + bus-range = <0 255>; + ranges = <0x2000000 0x0 0xe0000000 0 0xe0000000 0x0 0x10000000 + 0x1000000 0x0 0x00000000 0 0xe9000000 0x0 0x10000>; + clock-frequency = <33333333>; + interrupt-parent = <&mpic>; + interrupts = <24 2>; + interrupt-map-mask = <0xff00 0x0 0x0 0x7>; + interrupt-map = < + 0x0 0x0 0x0 0x1 &mpic 0x0 0x1 + 0x0 0x0 0x0 0x2 &mpic 0x1 0x1 + 0x0 0x0 0x0 0x3 &mpic 0x2 0x1 + 0x0 0x0 0x0 0x4 &mpic 0x3 0x1 + >; + pcie@0 { + reg = <0x0 0x0 0x0 0x0 0x0>; + #size-cells = <2>; + #address-cells = <3>; + device_type = "pci"; + ranges = <0x02000000 0x0 0xe0000000 + 0x02000000 0x0 0xe0000000 + 0x0 0x10000000 + + 0x01000000 0x0 0x0 + 0x01000000 0x0 0x0 + 0x0 0x100000>; + }; + }; + + /* PCI Express controller 2, PMC module via PEX8112 bridge */ + pci1: pcie@ef009000 { + compatible = "fsl,mpc8548-pcie"; + device_type = "pci"; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + reg = <0 0xef009000 0 0x1000>; + bus-range = <0 255>; + ranges = <0x2000000 0x0 0xc0000000 0 0xc0000000 0x0 0x10000000 + 0x1000000 0x0 0x00000000 0 0xe8800000 0x0 0x10000>; + clock-frequency = <33333333>; + interrupt-parent = <&mpic>; + interrupts = <25 2>; + interrupt-map-mask = <0xf800 0x0 0x0 0x7>; + interrupt-map = < + /* IDSEL 0x0 */ + 0x0 0x0 0x0 0x1 &mpic 0x4 0x1 + 0x0 0x0 0x0 0x2 &mpic 0x5 0x1 + 0x0 0x0 0x0 0x3 &mpic 0x6 0x1 + 0x0 0x0 0x0 0x4 &mpic 0x7 0x1 + >; + pcie@0 { + reg = <0x0 0x0 0x0 0x0 0x0>; + #size-cells = <2>; + #address-cells = <3>; + device_type = "pci"; + ranges = <0x2000000 0x0 0xc0000000 + 0x2000000 0x0 0xc0000000 + 0x0 0x10000000 + + 0x1000000 0x0 0x0 + 0x1000000 0x0 0x0 + 0x0 0x100000>; + }; + }; + + /* PCI Express controller 1, XMC P15 */ + pci2: pcie@ef00a000 { + compatible = "fsl,mpc8548-pcie"; + device_type = "pci"; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + reg = <0 0xef00a000 0 0x1000>; + bus-range = <0 255>; + ranges = <0x2000000 0x0 0x80000000 0 0x80000000 0x0 0x40000000 + 0x1000000 0x0 0x00000000 0 0xe8000000 0x0 0x10000>; + clock-frequency = <33333333>; + interrupt-parent = <&mpic>; + interrupts = <26 2>; + interrupt-map-mask = <0xf800 0x0 0x0 0x7>; + interrupt-map = < + /* IDSEL 0x0 */ + 0x0 0x0 0x0 0x1 &mpic 0x0 0x1 + 0x0 0x0 0x0 0x2 &mpic 0x1 0x1 + 0x0 0x0 0x0 0x3 &mpic 0x2 0x1 + 0x0 0x0 0x0 0x4 &mpic 0x3 0x1 + >; + pcie@0 { + reg = <0x0 0x0 0x0 0x0 0x0>; + #size-cells = <2>; + #address-cells = <3>; + device_type = "pci"; + ranges = <0x2000000 0x0 0x80000000 + 0x2000000 0x0 0x80000000 + 0x0 0x40000000 + + 0x1000000 0x0 0x0 + 0x1000000 0x0 0x0 + 0x0 0x100000>; + }; + }; +}; diff --git a/arch/powerpc/boot/dts/xpedite5370.dts b/arch/powerpc/boot/dts/xpedite5370.dts new file mode 100644 index 000000000..cd0ea2b99 --- /dev/null +++ b/arch/powerpc/boot/dts/xpedite5370.dts @@ -0,0 +1,638 @@ +/* + * Copyright (C) 2008 Extreme Engineering Solutions, Inc. + * Based on MPC8572DS device tree from Freescale Semiconductor, Inc. + * + * XPedite5370 3U VPX single-board computer based on MPC8572E + * + * This is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +/dts-v1/; +/ { + model = "xes,xpedite5370"; + compatible = "xes,xpedite5370", "xes,MPC8572"; + #address-cells = <2>; + #size-cells = <2>; + + aliases { + ethernet0 = &enet0; + ethernet1 = &enet1; + serial0 = &serial0; + serial1 = &serial1; + pci1 = &pci1; + pci2 = &pci2; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + PowerPC,8572@0 { + device_type = "cpu"; + reg = <0x0>; + d-cache-line-size = <32>; // 32 bytes + i-cache-line-size = <32>; // 32 bytes + d-cache-size = <0x8000>; // L1, 32K + i-cache-size = <0x8000>; // L1, 32K + timebase-frequency = <0>; + bus-frequency = <0>; + clock-frequency = <0>; + next-level-cache = <&L2>; + }; + + PowerPC,8572@1 { + device_type = "cpu"; + reg = <0x1>; + d-cache-line-size = <32>; // 32 bytes + i-cache-line-size = <32>; // 32 bytes + d-cache-size = <0x8000>; // L1, 32K + i-cache-size = <0x8000>; // L1, 32K + timebase-frequency = <0>; + bus-frequency = <0>; + clock-frequency = <0>; + next-level-cache = <&L2>; + }; + }; + + memory { + device_type = "memory"; + reg = <0x0 0x0 0x0 0x0>; // Filled in by U-Boot + }; + + localbus@ef005000 { + #address-cells = <2>; + #size-cells = <1>; + compatible = "fsl,mpc8572-elbc", "fsl,elbc", "simple-bus"; + reg = <0 0xef005000 0 0x1000>; + interrupts = <19 2>; + interrupt-parent = <&mpic>; + /* Local bus region mappings */ + ranges = <0 0 0 0xf8000000 0x8000000 /* CS0: Boot flash */ + 1 0 0 0xf0000000 0x8000000 /* CS1: Alternate flash */ + 2 0 0 0xef800000 0x40000 /* CS2: NAND CE1 */ + 3 0 0 0xef840000 0x40000>; /* CS3: NAND CE2 */ + + nor-boot@0,0 { + compatible = "amd,s29gl01gp", "cfi-flash"; + bank-width = <2>; + reg = <0 0 0x8000000>; /* 128MB */ + #address-cells = <1>; + #size-cells = <1>; + partition@0 { + label = "Primary user space"; + reg = <0x00000000 0x6f00000>; /* 111 MB */ + }; + partition@6f00000 { + label = "Primary kernel"; + reg = <0x6f00000 0x1000000>; /* 16 MB */ + }; + partition@7f00000 { + label = "Primary DTB"; + reg = <0x7f00000 0x40000>; /* 256 KB */ + }; + partition@7f40000 { + label = "Primary U-Boot environment"; + reg = <0x7f40000 0x40000>; /* 256 KB */ + }; + partition@7f80000 { + label = "Primary U-Boot"; + reg = <0x7f80000 0x80000>; /* 512 KB */ + read-only; + }; + }; + + nor-alternate@1,0 { + compatible = "amd,s29gl01gp", "cfi-flash"; + bank-width = <2>; + //reg = <0xf0000000 0x08000000>; /* 128MB */ + reg = <1 0 0x8000000>; /* 128MB */ + #address-cells = <1>; + #size-cells = <1>; + partition@0 { + label = "Secondary user space"; + reg = <0x00000000 0x6f00000>; /* 111 MB */ + }; + partition@6f00000 { + label = "Secondary kernel"; + reg = <0x6f00000 0x1000000>; /* 16 MB */ + }; + partition@7f00000 { + label = "Secondary DTB"; + reg = <0x7f00000 0x40000>; /* 256 KB */ + }; + partition@7f40000 { + label = "Secondary U-Boot environment"; + reg = <0x7f40000 0x40000>; /* 256 KB */ + }; + partition@7f80000 { + label = "Secondary U-Boot"; + reg = <0x7f80000 0x80000>; /* 512 KB */ + read-only; + }; + }; + + nand@2,0 { + #address-cells = <1>; + #size-cells = <1>; + /* + * Actual part could be ST Micro NAND08GW3B2A (1 GB), + * Micron MT29F8G08DAA (2x 512 MB), or Micron + * MT29F16G08FAA (2x 1 GB), depending on the build + * configuration + */ + compatible = "fsl,mpc8572-fcm-nand", + "fsl,elbc-fcm-nand"; + reg = <2 0 0x40000>; + /* U-Boot should fix this up if chip size > 1 GB */ + partition@0 { + label = "NAND Filesystem"; + reg = <0 0x40000000>; + }; + }; + + }; + + soc8572@ef000000 { + #address-cells = <1>; + #size-cells = <1>; + device_type = "soc"; + compatible = "fsl,mpc8572-immr", "simple-bus"; + ranges = <0x0 0 0xef000000 0x100000>; + bus-frequency = <0>; // Filled out by uboot. + + ecm-law@0 { + compatible = "fsl,ecm-law"; + reg = <0x0 0x1000>; + fsl,num-laws = <12>; + }; + + ecm@1000 { + compatible = "fsl,mpc8572-ecm", "fsl,ecm"; + reg = <0x1000 0x1000>; + interrupts = <17 2>; + interrupt-parent = <&mpic>; + }; + + memory-controller@2000 { + compatible = "fsl,mpc8572-memory-controller"; + reg = <0x2000 0x1000>; + interrupt-parent = <&mpic>; + interrupts = <18 2>; + }; + + memory-controller@6000 { + compatible = "fsl,mpc8572-memory-controller"; + reg = <0x6000 0x1000>; + interrupt-parent = <&mpic>; + interrupts = <18 2>; + }; + + L2: l2-cache-controller@20000 { + compatible = "fsl,mpc8572-l2-cache-controller"; + reg = <0x20000 0x1000>; + cache-line-size = <32>; // 32 bytes + cache-size = <0x100000>; // L2, 1M + interrupt-parent = <&mpic>; + interrupts = <16 2>; + }; + + i2c@3000 { + #address-cells = <1>; + #size-cells = <0>; + cell-index = <0>; + compatible = "fsl-i2c"; + reg = <0x3000 0x100>; + interrupts = <43 2>; + interrupt-parent = <&mpic>; + dfsrr; + + temp-sensor@48 { + compatible = "dallas,ds1631", "dallas,ds1621"; + reg = <0x48>; + }; + + temp-sensor@4c { + compatible = "adi,adt7461"; + reg = <0x4c>; + }; + + cpu-supervisor@51 { + compatible = "dallas,ds4510"; + reg = <0x51>; + }; + + eeprom@54 { + compatible = "atmel,at24c128b"; + reg = <0x54>; + }; + + rtc@68 { + compatible = "stm,m41t00", + "dallas,ds1338"; + reg = <0x68>; + }; + + pcie-switch@70 { + compatible = "plx,pex8518"; + reg = <0x70>; + }; + + gpio1: gpio@18 { + compatible = "nxp,pca9557"; + reg = <0x18>; + #gpio-cells = <2>; + gpio-controller; + polarity = <0x00>; + }; + + gpio2: gpio@1c { + compatible = "nxp,pca9557"; + reg = <0x1c>; + #gpio-cells = <2>; + gpio-controller; + polarity = <0x00>; + }; + + gpio3: gpio@1e { + compatible = "nxp,pca9557"; + reg = <0x1e>; + #gpio-cells = <2>; + gpio-controller; + polarity = <0x00>; + }; + + gpio4: gpio@1f { + compatible = "nxp,pca9557"; + reg = <0x1f>; + #gpio-cells = <2>; + gpio-controller; + polarity = <0x00>; + }; + }; + + i2c@3100 { + #address-cells = <1>; + #size-cells = <0>; + cell-index = <1>; + compatible = "fsl-i2c"; + reg = <0x3100 0x100>; + interrupts = <43 2>; + interrupt-parent = <&mpic>; + dfsrr; + }; + + dma@c300 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,mpc8572-dma", "fsl,eloplus-dma"; + reg = <0xc300 0x4>; + ranges = <0x0 0xc100 0x200>; + cell-index = <1>; + dma-channel@0 { + compatible = "fsl,mpc8572-dma-channel", + "fsl,eloplus-dma-channel"; + reg = <0x0 0x80>; + cell-index = <0>; + interrupt-parent = <&mpic>; + interrupts = <76 2>; + }; + dma-channel@80 { + compatible = "fsl,mpc8572-dma-channel", + "fsl,eloplus-dma-channel"; + reg = <0x80 0x80>; + cell-index = <1>; + interrupt-parent = <&mpic>; + interrupts = <77 2>; + }; + dma-channel@100 { + compatible = "fsl,mpc8572-dma-channel", + "fsl,eloplus-dma-channel"; + reg = <0x100 0x80>; + cell-index = <2>; + interrupt-parent = <&mpic>; + interrupts = <78 2>; + }; + dma-channel@180 { + compatible = "fsl,mpc8572-dma-channel", + "fsl,eloplus-dma-channel"; + reg = <0x180 0x80>; + cell-index = <3>; + interrupt-parent = <&mpic>; + interrupts = <79 2>; + }; + }; + + dma@21300 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,mpc8572-dma", "fsl,eloplus-dma"; + reg = <0x21300 0x4>; + ranges = <0x0 0x21100 0x200>; + cell-index = <0>; + dma-channel@0 { + compatible = "fsl,mpc8572-dma-channel", + "fsl,eloplus-dma-channel"; + reg = <0x0 0x80>; + cell-index = <0>; + interrupt-parent = <&mpic>; + interrupts = <20 2>; + }; + dma-channel@80 { + compatible = "fsl,mpc8572-dma-channel", + "fsl,eloplus-dma-channel"; + reg = <0x80 0x80>; + cell-index = <1>; + interrupt-parent = <&mpic>; + interrupts = <21 2>; + }; + dma-channel@100 { + compatible = "fsl,mpc8572-dma-channel", + "fsl,eloplus-dma-channel"; + reg = <0x100 0x80>; + cell-index = <2>; + interrupt-parent = <&mpic>; + interrupts = <22 2>; + }; + dma-channel@180 { + compatible = "fsl,mpc8572-dma-channel", + "fsl,eloplus-dma-channel"; + reg = <0x180 0x80>; + cell-index = <3>; + interrupt-parent = <&mpic>; + interrupts = <23 2>; + }; + }; + + /* eTSEC 1 */ + enet0: ethernet@24000 { + #address-cells = <1>; + #size-cells = <1>; + cell-index = <0>; + device_type = "network"; + model = "eTSEC"; + compatible = "gianfar"; + reg = <0x24000 0x1000>; + ranges = <0x0 0x24000 0x1000>; + local-mac-address = [ 00 00 00 00 00 00 ]; + interrupts = <29 2 30 2 34 2>; + interrupt-parent = <&mpic>; + tbi-handle = <&tbi0>; + phy-handle = <&phy0>; + phy-connection-type = "sgmii"; + + mdio@520 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,gianfar-mdio"; + reg = <0x520 0x20>; + + phy0: ethernet-phy@1 { + interrupt-parent = <&mpic>; + interrupts = <8 1>; + reg = <0x1>; + }; + phy1: ethernet-phy@2 { + interrupt-parent = <&mpic>; + interrupts = <8 1>; + reg = <0x2>; + }; + tbi0: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + }; + + /* eTSEC 2 */ + enet1: ethernet@25000 { + #address-cells = <1>; + #size-cells = <1>; + cell-index = <1>; + device_type = "network"; + model = "eTSEC"; + compatible = "gianfar"; + reg = <0x25000 0x1000>; + ranges = <0x0 0x25000 0x1000>; + local-mac-address = [ 00 00 00 00 00 00 ]; + interrupts = <35 2 36 2 40 2>; + interrupt-parent = <&mpic>; + tbi-handle = <&tbi1>; + phy-handle = <&phy1>; + phy-connection-type = "sgmii"; + + mdio@520 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,gianfar-tbi"; + reg = <0x520 0x20>; + + tbi1: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + }; + + /* UART0 */ + serial0: serial@4500 { + cell-index = <0>; + device_type = "serial"; + compatible = "fsl,ns16550", "ns16550"; + reg = <0x4500 0x100>; + clock-frequency = <0>; + interrupts = <42 2>; + interrupt-parent = <&mpic>; + }; + + /* UART1 */ + serial1: serial@4600 { + cell-index = <1>; + device_type = "serial"; + compatible = "fsl,ns16550", "ns16550"; + reg = <0x4600 0x100>; + clock-frequency = <0>; + interrupts = <42 2>; + interrupt-parent = <&mpic>; + }; + + global-utilities@e0000 { //global utilities block + compatible = "fsl,mpc8572-guts"; + reg = <0xe0000 0x1000>; + fsl,has-rstcr; + }; + + msi@41600 { + compatible = "fsl,mpc8572-msi", "fsl,mpic-msi"; + reg = <0x41600 0x80>; + msi-available-ranges = <0 0x100>; + interrupts = < + 0xe0 0 + 0xe1 0 + 0xe2 0 + 0xe3 0 + 0xe4 0 + 0xe5 0 + 0xe6 0 + 0xe7 0>; + interrupt-parent = <&mpic>; + }; + + crypto@30000 { + compatible = "fsl,sec3.0", "fsl,sec2.4", "fsl,sec2.2", + "fsl,sec2.1", "fsl,sec2.0"; + reg = <0x30000 0x10000>; + interrupts = <45 2 58 2>; + interrupt-parent = <&mpic>; + fsl,num-channels = <4>; + fsl,channel-fifo-len = <24>; + fsl,exec-units-mask = <0x9fe>; + fsl,descriptor-types-mask = <0x3ab0ebf>; + }; + + mpic: pic@40000 { + interrupt-controller; + #address-cells = <0>; + #interrupt-cells = <2>; + reg = <0x40000 0x40000>; + compatible = "chrp,open-pic"; + device_type = "open-pic"; + }; + + gpio0: gpio@f000 { + compatible = "fsl,mpc8572-gpio"; + reg = <0xf000 0x1000>; + interrupts = <47 2>; + interrupt-parent = <&mpic>; + #gpio-cells = <2>; + gpio-controller; + }; + + gpio-leds { + compatible = "gpio-leds"; + + heartbeat { + label = "Heartbeat"; + gpios = <&gpio0 4 1>; + linux,default-trigger = "heartbeat"; + }; + + yellow { + label = "Yellow"; + gpios = <&gpio0 5 1>; + }; + + red { + label = "Red"; + gpios = <&gpio0 6 1>; + }; + + green { + label = "Green"; + gpios = <&gpio0 7 1>; + }; + }; + + /* PME (pattern-matcher) */ + pme@10000 { + compatible = "fsl,mpc8572-pme", "pme8572"; + reg = <0x10000 0x5000>; + interrupts = <57 2 64 2 65 2 66 2 67 2>; + interrupt-parent = <&mpic>; + }; + + tlu@2f000 { + compatible = "fsl,mpc8572-tlu", "fsl_tlu"; + reg = <0x2f000 0x1000>; + interrupts = <61 2>; + interrupt-parent = <&mpic>; + }; + + tlu@15000 { + compatible = "fsl,mpc8572-tlu", "fsl_tlu"; + reg = <0x15000 0x1000>; + interrupts = <75 2>; + interrupt-parent = <&mpic>; + }; + }; + + /* + * PCI Express controller 3 @ ef008000 is not used. + * This would have been pci0 on other mpc85xx platforms. + */ + + /* PCI Express controller 2, wired to VPX P1,P2 backplane */ + pci1: pcie@ef009000 { + compatible = "fsl,mpc8548-pcie"; + device_type = "pci"; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + reg = <0 0xef009000 0 0x1000>; + bus-range = <0 255>; + ranges = <0x2000000 0x0 0xc0000000 0 0xc0000000 0x0 0x10000000 + 0x1000000 0x0 0x00000000 0 0xe8800000 0x0 0x00010000>; + clock-frequency = <33333333>; + interrupt-parent = <&mpic>; + interrupts = <25 2>; + interrupt-map-mask = <0xf800 0x0 0x0 0x7>; + interrupt-map = < + /* IDSEL 0x0 */ + 0x0 0x0 0x0 0x1 &mpic 0x4 0x1 + 0x0 0x0 0x0 0x2 &mpic 0x5 0x1 + 0x0 0x0 0x0 0x3 &mpic 0x6 0x1 + 0x0 0x0 0x0 0x4 &mpic 0x7 0x1 + >; + pcie@0 { + reg = <0x00000000 0x00000000 0x00000000 0x00000000 0x00000000>; + #size-cells = <2>; + #address-cells = <3>; + device_type = "pci"; + ranges = <0x2000000 0x0 0xc0000000 + 0x2000000 0x0 0xc0000000 + 0x0 0x10000000 + + 0x1000000 0x0 0x0 + 0x1000000 0x0 0x0 + 0x0 0x100000>; + }; + }; + + /* PCI Express controller 1, wired to PEX8518 PCIe switch */ + pci2: pcie@ef00a000 { + compatible = "fsl,mpc8548-pcie"; + device_type = "pci"; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + reg = <0 0xef00a000 0 0x1000>; + bus-range = <0 255>; + ranges = <0x2000000 0x0 0x80000000 0 0x80000000 0x0 0x40000000 + 0x1000000 0x0 0x00000000 0 0xe8000000 0x0 0x10000>; + clock-frequency = <33333333>; + interrupt-parent = <&mpic>; + interrupts = <26 2>; + interrupt-map-mask = <0xf800 0x0 0x0 0x7>; + interrupt-map = < + /* IDSEL 0x0 */ + 0x0 0x0 0x0 0x1 &mpic 0x0 0x1 + 0x0 0x0 0x0 0x2 &mpic 0x1 0x1 + 0x0 0x0 0x0 0x3 &mpic 0x2 0x1 + 0x0 0x0 0x0 0x4 &mpic 0x3 0x1 + >; + pcie@0 { + reg = <0x0 0x0 0x0 0x0 0x0>; + #size-cells = <2>; + #address-cells = <3>; + device_type = "pci"; + ranges = <0x2000000 0x0 0x80000000 + 0x2000000 0x0 0x80000000 + 0x0 0x40000000 + + 0x1000000 0x0 0x0 + 0x1000000 0x0 0x0 + 0x0 0x100000>; + }; + }; +}; diff --git a/arch/powerpc/boot/dts/yosemite.dts b/arch/powerpc/boot/dts/yosemite.dts new file mode 100644 index 000000000..30bb47535 --- /dev/null +++ b/arch/powerpc/boot/dts/yosemite.dts @@ -0,0 +1,332 @@ +/* + * Device Tree Source for AMCC Yosemite + * + * Copyright 2008 IBM Corp. + * Josh Boyer <jwboyer@linux.vnet.ibm.com> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without + * any warranty of any kind, whether express or implied. + */ + +/dts-v1/; + +/ { + #address-cells = <2>; + #size-cells = <1>; + model = "amcc,yosemite"; + compatible = "amcc,yosemite"; + dcr-parent = <&{/cpus/cpu@0}>; + + aliases { + ethernet0 = &EMAC0; + ethernet1 = &EMAC1; + serial0 = &UART0; + serial1 = &UART1; + serial2 = &UART2; + serial3 = &UART3; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu@0 { + device_type = "cpu"; + model = "PowerPC,440EP"; + reg = <0x00000000>; + clock-frequency = <0>; /* Filled in by zImage */ + timebase-frequency = <0>; /* Filled in by zImage */ + i-cache-line-size = <32>; + d-cache-line-size = <32>; + i-cache-size = <32768>; + d-cache-size = <32768>; + dcr-controller; + dcr-access-method = "native"; + }; + }; + + memory { + device_type = "memory"; + reg = <0x00000000 0x00000000 0x00000000>; /* Filled in by zImage */ + }; + + UIC0: interrupt-controller0 { + compatible = "ibm,uic-440ep","ibm,uic"; + interrupt-controller; + cell-index = <0>; + dcr-reg = <0x0c0 0x009>; + #address-cells = <0>; + #size-cells = <0>; + #interrupt-cells = <2>; + }; + + UIC1: interrupt-controller1 { + compatible = "ibm,uic-440ep","ibm,uic"; + interrupt-controller; + cell-index = <1>; + dcr-reg = <0x0d0 0x009>; + #address-cells = <0>; + #size-cells = <0>; + #interrupt-cells = <2>; + interrupts = <0x1e 0x4 0x1f 0x4>; /* cascade */ + interrupt-parent = <&UIC0>; + }; + + SDR0: sdr { + compatible = "ibm,sdr-440ep"; + dcr-reg = <0x00e 0x002>; + }; + + CPR0: cpr { + compatible = "ibm,cpr-440ep"; + dcr-reg = <0x00c 0x002>; + }; + + plb { + compatible = "ibm,plb-440ep", "ibm,plb-440gp", "ibm,plb4"; + #address-cells = <2>; + #size-cells = <1>; + ranges; + clock-frequency = <0>; /* Filled in by zImage */ + + SDRAM0: sdram { + compatible = "ibm,sdram-440ep", "ibm,sdram-405gp"; + dcr-reg = <0x010 0x002>; + }; + + DMA0: dma { + compatible = "ibm,dma-440ep", "ibm,dma-440gp"; + dcr-reg = <0x100 0x027>; + }; + + MAL0: mcmal { + compatible = "ibm,mcmal-440ep", "ibm,mcmal-440gp", "ibm,mcmal"; + dcr-reg = <0x180 0x062>; + num-tx-chans = <4>; + num-rx-chans = <2>; + interrupt-parent = <&MAL0>; + interrupts = <0x0 0x1 0x2 0x3 0x4>; + #interrupt-cells = <1>; + #address-cells = <0>; + #size-cells = <0>; + interrupt-map = </*TXEOB*/ 0x0 &UIC0 0xa 0x4 + /*RXEOB*/ 0x1 &UIC0 0xb 0x4 + /*SERR*/ 0x2 &UIC1 0x0 0x4 + /*TXDE*/ 0x3 &UIC1 0x1 0x4 + /*RXDE*/ 0x4 &UIC1 0x2 0x4>; + }; + + POB0: opb { + compatible = "ibm,opb-440ep", "ibm,opb-440gp", "ibm,opb"; + #address-cells = <1>; + #size-cells = <1>; + /* Bamboo is oddball in the 44x world and doesn't use the ERPN + * bits. + */ + ranges = <0x00000000 0x00000000 0x00000000 0x80000000 + 0x80000000 0x00000000 0x80000000 0x80000000>; + interrupt-parent = <&UIC1>; + interrupts = <0x7 0x4>; + clock-frequency = <0>; /* Filled in by zImage */ + + EBC0: ebc { + compatible = "ibm,ebc-440ep", "ibm,ebc-440gp", "ibm,ebc"; + dcr-reg = <0x012 0x002>; + #address-cells = <2>; + #size-cells = <1>; + clock-frequency = <0>; /* Filled in by zImage */ + interrupts = <0x5 0x1>; + interrupt-parent = <&UIC1>; + + nor_flash@0,0 { + compatible = "amd,s29gl256n", "cfi-flash"; + bank-width = <2>; + reg = <0x00000000 0x00000000 0x04000000>; + #address-cells = <1>; + #size-cells = <1>; + partition@0 { + label = "kernel"; + reg = <0x00000000 0x001e0000>; + }; + partition@1e0000 { + label = "dtb"; + reg = <0x001e0000 0x00020000>; + }; + partition@200000 { + label = "ramdisk"; + reg = <0x00200000 0x01400000>; + }; + partition@1600000 { + label = "jffs2"; + reg = <0x01600000 0x00400000>; + }; + partition@1a00000 { + label = "user"; + reg = <0x01a00000 0x02540000>; + }; + partition@3f40000 { + label = "env"; + reg = <0x03f40000 0x00040000>; + }; + partition@3f80000 { + label = "u-boot"; + reg = <0x03f80000 0x00080000>; + }; + }; + }; + + UART0: serial@ef600300 { + device_type = "serial"; + compatible = "ns16550"; + reg = <0xef600300 0x00000008>; + virtual-reg = <0xef600300>; + clock-frequency = <0>; /* Filled in by zImage */ + current-speed = <115200>; + interrupt-parent = <&UIC0>; + interrupts = <0x0 0x4>; + }; + + UART1: serial@ef600400 { + device_type = "serial"; + compatible = "ns16550"; + reg = <0xef600400 0x00000008>; + virtual-reg = <0xef600400>; + clock-frequency = <0>; + current-speed = <0>; + interrupt-parent = <&UIC0>; + interrupts = <0x1 0x4>; + }; + + UART2: serial@ef600500 { + device_type = "serial"; + compatible = "ns16550"; + reg = <0xef600500 0x00000008>; + virtual-reg = <0xef600500>; + clock-frequency = <0>; + current-speed = <0>; + interrupt-parent = <&UIC0>; + interrupts = <0x3 0x4>; + status = "disabled"; + }; + + UART3: serial@ef600600 { + device_type = "serial"; + compatible = "ns16550"; + reg = <0xef600600 0x00000008>; + virtual-reg = <0xef600600>; + clock-frequency = <0>; + current-speed = <0>; + interrupt-parent = <&UIC0>; + interrupts = <0x4 0x4>; + status = "disabled"; + }; + + IIC0: i2c@ef600700 { + compatible = "ibm,iic-440ep", "ibm,iic-440gp", "ibm,iic"; + reg = <0xef600700 0x00000014>; + interrupt-parent = <&UIC0>; + interrupts = <0x2 0x4>; + }; + + IIC1: i2c@ef600800 { + compatible = "ibm,iic-440ep", "ibm,iic-440gp", "ibm,iic"; + reg = <0xef600800 0x00000014>; + interrupt-parent = <&UIC0>; + interrupts = <0x7 0x4>; + }; + + spi@ef600900 { + compatible = "amcc,spi-440ep"; + reg = <0xef600900 0x00000006>; + interrupts = <0x8 0x4>; + interrupt-parent = <&UIC0>; + }; + + ZMII0: emac-zmii@ef600d00 { + compatible = "ibm,zmii-440ep", "ibm,zmii-440gp", "ibm,zmii"; + reg = <0xef600d00 0x0000000c>; + }; + + EMAC0: ethernet@ef600e00 { + device_type = "network"; + compatible = "ibm,emac-440ep", "ibm,emac-440gp", "ibm,emac"; + interrupt-parent = <&UIC1>; + interrupts = <0x1c 0x4 0x1d 0x4>; + reg = <0xef600e00 0x00000070>; + local-mac-address = [000000000000]; + mal-device = <&MAL0>; + mal-tx-channel = <0 1>; + mal-rx-channel = <0>; + cell-index = <0>; + max-frame-size = <1500>; + rx-fifo-size = <4096>; + tx-fifo-size = <2048>; + phy-mode = "rmii"; + phy-map = <0x00000000>; + zmii-device = <&ZMII0>; + zmii-channel = <0>; + }; + + EMAC1: ethernet@ef600f00 { + device_type = "network"; + compatible = "ibm,emac-440ep", "ibm,emac-440gp", "ibm,emac"; + interrupt-parent = <&UIC1>; + interrupts = <0x1e 0x4 0x1f 0x4>; + reg = <0xef600f00 0x00000070>; + local-mac-address = [000000000000]; + mal-device = <&MAL0>; + mal-tx-channel = <2 3>; + mal-rx-channel = <1>; + cell-index = <1>; + max-frame-size = <1500>; + rx-fifo-size = <4096>; + tx-fifo-size = <2048>; + phy-mode = "rmii"; + phy-map = <0x00000000>; + zmii-device = <&ZMII0>; + zmii-channel = <1>; + }; + + usb@ef601000 { + compatible = "ohci-be"; + reg = <0xef601000 0x00000080>; + interrupts = <0x8 0x4 0x9 0x4>; + interrupt-parent = < &UIC1 >; + }; + }; + + PCI0: pci@ec000000 { + device_type = "pci"; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + compatible = "ibm,plb440ep-pci", "ibm,plb-pci"; + primary; + reg = <0x00000000 0xeec00000 0x00000008 /* Config space access */ + 0x00000000 0xeed00000 0x00000004 /* IACK */ + 0x00000000 0xeed00000 0x00000004 /* Special cycle */ + 0x00000000 0xef400000 0x00000040>; /* Internal registers */ + + /* Outbound ranges, one memory and one IO, + * later cannot be changed. Chip supports a second + * IO range but we don't use it for now + */ + ranges = <0x02000000 0x00000000 0xa0000000 0x00000000 0xa0000000 0x00000000 0x20000000 + 0x01000000 0x00000000 0x00000000 0x00000000 0xe8000000 0x00000000 0x00010000>; + + /* Inbound 2GB range starting at 0 */ + dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x0 0x80000000>; + + interrupt-map-mask = <0xf800 0x0 0x0 0x0>; + interrupt-map = < + /* IDSEL 12 */ + 0x6000 0x0 0x0 0x0 &UIC0 0x19 0x8 + >; + }; + }; + + chosen { + linux,stdout-path = "/plb/opb/serial@ef600300"; + }; +}; |