summaryrefslogtreecommitdiff
path: root/arch/powerpc/kernel/legacy_serial.c
diff options
context:
space:
mode:
Diffstat (limited to 'arch/powerpc/kernel/legacy_serial.c')
-rw-r--r--arch/powerpc/kernel/legacy_serial.c648
1 files changed, 648 insertions, 0 deletions
diff --git a/arch/powerpc/kernel/legacy_serial.c b/arch/powerpc/kernel/legacy_serial.c
new file mode 100644
index 000000000..7b750c4ed
--- /dev/null
+++ b/arch/powerpc/kernel/legacy_serial.c
@@ -0,0 +1,648 @@
+#include <linux/kernel.h>
+#include <linux/serial.h>
+#include <linux/serial_8250.h>
+#include <linux/serial_core.h>
+#include <linux/console.h>
+#include <linux/pci.h>
+#include <linux/of_address.h>
+#include <linux/of_device.h>
+#include <linux/serial_reg.h>
+#include <asm/io.h>
+#include <asm/mmu.h>
+#include <asm/prom.h>
+#include <asm/serial.h>
+#include <asm/udbg.h>
+#include <asm/pci-bridge.h>
+#include <asm/ppc-pci.h>
+
+#undef DEBUG
+
+#ifdef DEBUG
+#define DBG(fmt...) do { printk(fmt); } while(0)
+#else
+#define DBG(fmt...) do { } while(0)
+#endif
+
+#define MAX_LEGACY_SERIAL_PORTS 8
+
+static struct plat_serial8250_port
+legacy_serial_ports[MAX_LEGACY_SERIAL_PORTS+1];
+static struct legacy_serial_info {
+ struct device_node *np;
+ unsigned int speed;
+ unsigned int clock;
+ int irq_check_parent;
+ phys_addr_t taddr;
+} legacy_serial_infos[MAX_LEGACY_SERIAL_PORTS];
+
+static const struct of_device_id legacy_serial_parents[] __initconst = {
+ {.type = "soc",},
+ {.type = "tsi-bridge",},
+ {.type = "opb", },
+ {.compatible = "ibm,opb",},
+ {.compatible = "simple-bus",},
+ {.compatible = "wrs,epld-localbus",},
+ {},
+};
+
+static unsigned int legacy_serial_count;
+static int legacy_serial_console = -1;
+
+static const upf_t legacy_port_flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST |
+ UPF_SHARE_IRQ | UPF_FIXED_PORT;
+
+static unsigned int tsi_serial_in(struct uart_port *p, int offset)
+{
+ unsigned int tmp;
+ offset = offset << p->regshift;
+ if (offset == UART_IIR) {
+ tmp = readl(p->membase + (UART_IIR & ~3));
+ return (tmp >> 16) & 0xff; /* UART_IIR % 4 == 2 */
+ } else
+ return readb(p->membase + offset);
+}
+
+static void tsi_serial_out(struct uart_port *p, int offset, int value)
+{
+ offset = offset << p->regshift;
+ if (!((offset == UART_IER) && (value & UART_IER_UUE)))
+ writeb(value, p->membase + offset);
+}
+
+static int __init add_legacy_port(struct device_node *np, int want_index,
+ int iotype, phys_addr_t base,
+ phys_addr_t taddr, unsigned long irq,
+ upf_t flags, int irq_check_parent)
+{
+ const __be32 *clk, *spd, *rs;
+ u32 clock = BASE_BAUD * 16;
+ u32 shift = 0;
+ int index;
+
+ /* get clock freq. if present */
+ clk = of_get_property(np, "clock-frequency", NULL);
+ if (clk && *clk)
+ clock = be32_to_cpup(clk);
+
+ /* get default speed if present */
+ spd = of_get_property(np, "current-speed", NULL);
+
+ /* get register shift if present */
+ rs = of_get_property(np, "reg-shift", NULL);
+ if (rs && *rs)
+ shift = be32_to_cpup(rs);
+
+ /* If we have a location index, then try to use it */
+ if (want_index >= 0 && want_index < MAX_LEGACY_SERIAL_PORTS)
+ index = want_index;
+ else
+ index = legacy_serial_count;
+
+ /* if our index is still out of range, that mean that
+ * array is full, we could scan for a free slot but that
+ * make little sense to bother, just skip the port
+ */
+ if (index >= MAX_LEGACY_SERIAL_PORTS)
+ return -1;
+ if (index >= legacy_serial_count)
+ legacy_serial_count = index + 1;
+
+ /* Check if there is a port who already claimed our slot */
+ if (legacy_serial_infos[index].np != NULL) {
+ /* if we still have some room, move it, else override */
+ if (legacy_serial_count < MAX_LEGACY_SERIAL_PORTS) {
+ printk(KERN_DEBUG "Moved legacy port %d -> %d\n",
+ index, legacy_serial_count);
+ legacy_serial_ports[legacy_serial_count] =
+ legacy_serial_ports[index];
+ legacy_serial_infos[legacy_serial_count] =
+ legacy_serial_infos[index];
+ legacy_serial_count++;
+ } else {
+ printk(KERN_DEBUG "Replacing legacy port %d\n", index);
+ }
+ }
+
+ /* Now fill the entry */
+ memset(&legacy_serial_ports[index], 0,
+ sizeof(struct plat_serial8250_port));
+ if (iotype == UPIO_PORT)
+ legacy_serial_ports[index].iobase = base;
+ else
+ legacy_serial_ports[index].mapbase = base;
+
+ legacy_serial_ports[index].iotype = iotype;
+ legacy_serial_ports[index].uartclk = clock;
+ legacy_serial_ports[index].irq = irq;
+ legacy_serial_ports[index].flags = flags;
+ legacy_serial_ports[index].regshift = shift;
+ legacy_serial_infos[index].taddr = taddr;
+ legacy_serial_infos[index].np = of_node_get(np);
+ legacy_serial_infos[index].clock = clock;
+ legacy_serial_infos[index].speed = spd ? be32_to_cpup(spd) : 0;
+ legacy_serial_infos[index].irq_check_parent = irq_check_parent;
+
+ if (iotype == UPIO_TSI) {
+ legacy_serial_ports[index].serial_in = tsi_serial_in;
+ legacy_serial_ports[index].serial_out = tsi_serial_out;
+ }
+
+ printk(KERN_DEBUG "Found legacy serial port %d for %s\n",
+ index, np->full_name);
+ printk(KERN_DEBUG " %s=%llx, taddr=%llx, irq=%lx, clk=%d, speed=%d\n",
+ (iotype == UPIO_PORT) ? "port" : "mem",
+ (unsigned long long)base, (unsigned long long)taddr, irq,
+ legacy_serial_ports[index].uartclk,
+ legacy_serial_infos[index].speed);
+
+ return index;
+}
+
+static int __init add_legacy_soc_port(struct device_node *np,
+ struct device_node *soc_dev)
+{
+ u64 addr;
+ const __be32 *addrp;
+ struct device_node *tsi = of_get_parent(np);
+
+ /* We only support ports that have a clock frequency properly
+ * encoded in the device-tree.
+ */
+ if (of_get_property(np, "clock-frequency", NULL) == NULL)
+ return -1;
+
+ /* if reg-offset don't try to use it */
+ if ((of_get_property(np, "reg-offset", NULL) != NULL))
+ return -1;
+
+ /* if rtas uses this device, don't try to use it as well */
+ if (of_get_property(np, "used-by-rtas", NULL) != NULL)
+ return -1;
+
+ /* Get the address */
+ addrp = of_get_address(soc_dev, 0, NULL, NULL);
+ if (addrp == NULL)
+ return -1;
+
+ addr = of_translate_address(soc_dev, addrp);
+ if (addr == OF_BAD_ADDR)
+ return -1;
+
+ /* Add port, irq will be dealt with later. We passed a translated
+ * IO port value. It will be fixed up later along with the irq
+ */
+ if (tsi && !strcmp(tsi->type, "tsi-bridge"))
+ return add_legacy_port(np, -1, UPIO_TSI, addr, addr,
+ NO_IRQ, legacy_port_flags, 0);
+ else
+ return add_legacy_port(np, -1, UPIO_MEM, addr, addr,
+ NO_IRQ, legacy_port_flags, 0);
+}
+
+static int __init add_legacy_isa_port(struct device_node *np,
+ struct device_node *isa_brg)
+{
+ const __be32 *reg;
+ const char *typep;
+ int index = -1;
+ u64 taddr;
+
+ DBG(" -> add_legacy_isa_port(%s)\n", np->full_name);
+
+ /* Get the ISA port number */
+ reg = of_get_property(np, "reg", NULL);
+ if (reg == NULL)
+ return -1;
+
+ /* Verify it's an IO port, we don't support anything else */
+ if (!(be32_to_cpu(reg[0]) & 0x00000001))
+ return -1;
+
+ /* Now look for an "ibm,aix-loc" property that gives us ordering
+ * if any...
+ */
+ typep = of_get_property(np, "ibm,aix-loc", NULL);
+
+ /* If we have a location index, then use it */
+ if (typep && *typep == 'S')
+ index = simple_strtol(typep+1, NULL, 0) - 1;
+
+ /* Translate ISA address. If it fails, we still register the port
+ * with no translated address so that it can be picked up as an IO
+ * port later by the serial driver
+ *
+ * Note: Don't even try on P8 lpc, we know it's not directly mapped
+ */
+ if (!of_device_is_compatible(isa_brg, "ibm,power8-lpc")) {
+ taddr = of_translate_address(np, reg);
+ if (taddr == OF_BAD_ADDR)
+ taddr = 0;
+ } else
+ taddr = 0;
+
+ /* Add port, irq will be dealt with later */
+ return add_legacy_port(np, index, UPIO_PORT, be32_to_cpu(reg[1]),
+ taddr, NO_IRQ, legacy_port_flags, 0);
+
+}
+
+#ifdef CONFIG_PCI
+static int __init add_legacy_pci_port(struct device_node *np,
+ struct device_node *pci_dev)
+{
+ u64 addr, base;
+ const __be32 *addrp;
+ unsigned int flags;
+ int iotype, index = -1, lindex = 0;
+
+ DBG(" -> add_legacy_pci_port(%s)\n", np->full_name);
+
+ /* We only support ports that have a clock frequency properly
+ * encoded in the device-tree (that is have an fcode). Anything
+ * else can't be used that early and will be normally probed by
+ * the generic 8250_pci driver later on. The reason is that 8250
+ * compatible UARTs on PCI need all sort of quirks (port offsets
+ * etc...) that this code doesn't know about
+ */
+ if (of_get_property(np, "clock-frequency", NULL) == NULL)
+ return -1;
+
+ /* Get the PCI address. Assume BAR 0 */
+ addrp = of_get_pci_address(pci_dev, 0, NULL, &flags);
+ if (addrp == NULL)
+ return -1;
+
+ /* We only support BAR 0 for now */
+ iotype = (flags & IORESOURCE_MEM) ? UPIO_MEM : UPIO_PORT;
+ addr = of_translate_address(pci_dev, addrp);
+ if (addr == OF_BAD_ADDR)
+ return -1;
+
+ /* Set the IO base to the same as the translated address for MMIO,
+ * or to the domain local IO base for PIO (it will be fixed up later)
+ */
+ if (iotype == UPIO_MEM)
+ base = addr;
+ else
+ base = of_read_number(&addrp[2], 1);
+
+ /* Try to guess an index... If we have subdevices of the pci dev,
+ * we get to their "reg" property
+ */
+ if (np != pci_dev) {
+ const __be32 *reg = of_get_property(np, "reg", NULL);
+ if (reg && (be32_to_cpup(reg) < 4))
+ index = lindex = be32_to_cpup(reg);
+ }
+
+ /* Local index means it's the Nth port in the PCI chip. Unfortunately
+ * the offset to add here is device specific. We know about those
+ * EXAR ports and we default to the most common case. If your UART
+ * doesn't work for these settings, you'll have to add your own special
+ * cases here
+ */
+ if (of_device_is_compatible(pci_dev, "pci13a8,152") ||
+ of_device_is_compatible(pci_dev, "pci13a8,154") ||
+ of_device_is_compatible(pci_dev, "pci13a8,158")) {
+ addr += 0x200 * lindex;
+ base += 0x200 * lindex;
+ } else {
+ addr += 8 * lindex;
+ base += 8 * lindex;
+ }
+
+ /* Add port, irq will be dealt with later. We passed a translated
+ * IO port value. It will be fixed up later along with the irq
+ */
+ return add_legacy_port(np, index, iotype, base, addr, NO_IRQ,
+ legacy_port_flags, np != pci_dev);
+}
+#endif
+
+static void __init setup_legacy_serial_console(int console)
+{
+ struct legacy_serial_info *info = &legacy_serial_infos[console];
+ struct plat_serial8250_port *port = &legacy_serial_ports[console];
+ void __iomem *addr;
+ unsigned int stride;
+
+ stride = 1 << port->regshift;
+
+ /* Check if a translated MMIO address has been found */
+ if (info->taddr) {
+ addr = ioremap(info->taddr, 0x1000);
+ if (addr == NULL)
+ return;
+ udbg_uart_init_mmio(addr, stride);
+ } else {
+ /* Check if it's PIO and we support untranslated PIO */
+ if (port->iotype == UPIO_PORT && isa_io_special)
+ udbg_uart_init_pio(port->iobase, stride);
+ else
+ return;
+ }
+
+ /* Try to query the current speed */
+ if (info->speed == 0)
+ info->speed = udbg_probe_uart_speed(info->clock);
+
+ /* Set it up */
+ DBG("default console speed = %d\n", info->speed);
+ udbg_uart_setup(info->speed, info->clock);
+}
+
+/*
+ * This is called very early, as part of setup_system() or eventually
+ * setup_arch(), basically before anything else in this file. This function
+ * will try to build a list of all the available 8250-compatible serial ports
+ * in the machine using the Open Firmware device-tree. It currently only deals
+ * with ISA and PCI busses but could be extended. It allows a very early boot
+ * console to be initialized, that list is also used later to provide 8250 with
+ * the machine non-PCI ports and to properly pick the default console port
+ */
+void __init find_legacy_serial_ports(void)
+{
+ struct device_node *np, *stdout = NULL;
+ const char *path;
+ int index;
+
+ DBG(" -> find_legacy_serial_port()\n");
+
+ /* Now find out if one of these is out firmware console */
+ path = of_get_property(of_chosen, "linux,stdout-path", NULL);
+ if (path != NULL) {
+ stdout = of_find_node_by_path(path);
+ if (stdout)
+ DBG("stdout is %s\n", stdout->full_name);
+ } else {
+ DBG(" no linux,stdout-path !\n");
+ }
+
+ /* Iterate over all the 16550 ports, looking for known parents */
+ for_each_compatible_node(np, "serial", "ns16550") {
+ struct device_node *parent = of_get_parent(np);
+ if (!parent)
+ continue;
+ if (of_match_node(legacy_serial_parents, parent) != NULL) {
+ if (of_device_is_available(np)) {
+ index = add_legacy_soc_port(np, np);
+ if (index >= 0 && np == stdout)
+ legacy_serial_console = index;
+ }
+ }
+ of_node_put(parent);
+ }
+
+ /* Next, fill our array with ISA ports */
+ for_each_node_by_type(np, "serial") {
+ struct device_node *isa = of_get_parent(np);
+ if (isa && (!strcmp(isa->name, "isa") ||
+ !strcmp(isa->name, "lpc"))) {
+ if (of_device_is_available(np)) {
+ index = add_legacy_isa_port(np, isa);
+ if (index >= 0 && np == stdout)
+ legacy_serial_console = index;
+ }
+ }
+ of_node_put(isa);
+ }
+
+#ifdef CONFIG_PCI
+ /* Next, try to locate PCI ports */
+ for (np = NULL; (np = of_find_all_nodes(np));) {
+ struct device_node *pci, *parent = of_get_parent(np);
+ if (parent && !strcmp(parent->name, "isa")) {
+ of_node_put(parent);
+ continue;
+ }
+ if (strcmp(np->name, "serial") && strcmp(np->type, "serial")) {
+ of_node_put(parent);
+ continue;
+ }
+ /* Check for known pciclass, and also check whether we have
+ * a device with child nodes for ports or not
+ */
+ if (of_device_is_compatible(np, "pciclass,0700") ||
+ of_device_is_compatible(np, "pciclass,070002"))
+ pci = np;
+ else if (of_device_is_compatible(parent, "pciclass,0700") ||
+ of_device_is_compatible(parent, "pciclass,070002"))
+ pci = parent;
+ else {
+ of_node_put(parent);
+ continue;
+ }
+ index = add_legacy_pci_port(np, pci);
+ if (index >= 0 && np == stdout)
+ legacy_serial_console = index;
+ of_node_put(parent);
+ }
+#endif
+
+ DBG("legacy_serial_console = %d\n", legacy_serial_console);
+ if (legacy_serial_console >= 0)
+ setup_legacy_serial_console(legacy_serial_console);
+ DBG(" <- find_legacy_serial_port()\n");
+}
+
+static struct platform_device serial_device = {
+ .name = "serial8250",
+ .id = PLAT8250_DEV_PLATFORM,
+ .dev = {
+ .platform_data = legacy_serial_ports,
+ },
+};
+
+static void __init fixup_port_irq(int index,
+ struct device_node *np,
+ struct plat_serial8250_port *port)
+{
+ unsigned int virq;
+
+ DBG("fixup_port_irq(%d)\n", index);
+
+ virq = irq_of_parse_and_map(np, 0);
+ if (virq == NO_IRQ && legacy_serial_infos[index].irq_check_parent) {
+ np = of_get_parent(np);
+ if (np == NULL)
+ return;
+ virq = irq_of_parse_and_map(np, 0);
+ of_node_put(np);
+ }
+ if (virq == NO_IRQ)
+ return;
+
+ port->irq = virq;
+
+#ifdef CONFIG_SERIAL_8250_FSL
+ if (of_device_is_compatible(np, "fsl,ns16550"))
+ port->handle_irq = fsl8250_handle_irq;
+#endif
+}
+
+static void __init fixup_port_pio(int index,
+ struct device_node *np,
+ struct plat_serial8250_port *port)
+{
+#ifdef CONFIG_PCI
+ struct pci_controller *hose;
+
+ DBG("fixup_port_pio(%d)\n", index);
+
+ hose = pci_find_hose_for_OF_device(np);
+ if (hose) {
+ unsigned long offset = (unsigned long)hose->io_base_virt -
+#ifdef CONFIG_PPC64
+ pci_io_base;
+#else
+ isa_io_base;
+#endif
+ DBG("port %d, IO %lx -> %lx\n",
+ index, port->iobase, port->iobase + offset);
+ port->iobase += offset;
+ }
+#endif
+}
+
+static void __init fixup_port_mmio(int index,
+ struct device_node *np,
+ struct plat_serial8250_port *port)
+{
+ DBG("fixup_port_mmio(%d)\n", index);
+
+ port->membase = ioremap(port->mapbase, 0x100);
+}
+
+/*
+ * This is called as an arch initcall, hopefully before the PCI bus is
+ * probed and/or the 8250 driver loaded since we need to register our
+ * platform devices before 8250 PCI ones are detected as some of them
+ * must properly "override" the platform ones.
+ *
+ * This function fixes up the interrupt value for platform ports as it
+ * couldn't be done earlier before interrupt maps have been parsed. It
+ * also "corrects" the IO address for PIO ports for the same reason,
+ * since earlier, the PHBs virtual IO space wasn't assigned yet. It then
+ * registers all those platform ports for use by the 8250 driver when it
+ * finally loads.
+ */
+static int __init serial_dev_init(void)
+{
+ int i;
+
+ if (legacy_serial_count == 0)
+ return -ENODEV;
+
+ /*
+ * Before we register the platform serial devices, we need
+ * to fixup their interrupts and their IO ports.
+ */
+ DBG("Fixing serial ports interrupts and IO ports ...\n");
+
+ for (i = 0; i < legacy_serial_count; i++) {
+ struct plat_serial8250_port *port = &legacy_serial_ports[i];
+ struct device_node *np = legacy_serial_infos[i].np;
+
+ if (port->irq == NO_IRQ)
+ fixup_port_irq(i, np, port);
+ if (port->iotype == UPIO_PORT)
+ fixup_port_pio(i, np, port);
+ if ((port->iotype == UPIO_MEM) || (port->iotype == UPIO_TSI))
+ fixup_port_mmio(i, np, port);
+ }
+
+ DBG("Registering platform serial ports\n");
+
+ return platform_device_register(&serial_device);
+}
+device_initcall(serial_dev_init);
+
+
+#ifdef CONFIG_SERIAL_8250_CONSOLE
+/*
+ * This is called very early, as part of console_init() (typically just after
+ * time_init()). This function is respondible for trying to find a good
+ * default console on serial ports. It tries to match the open firmware
+ * default output with one of the available serial console drivers that have
+ * been probed earlier by find_legacy_serial_ports()
+ */
+static int __init check_legacy_serial_console(void)
+{
+ struct device_node *prom_stdout = NULL;
+ int i, speed = 0, offset = 0;
+ const char *name;
+ const __be32 *spd;
+
+ DBG(" -> check_legacy_serial_console()\n");
+
+ /* The user has requested a console so this is already set up. */
+ if (strstr(boot_command_line, "console=")) {
+ DBG(" console was specified !\n");
+ return -EBUSY;
+ }
+
+ if (!of_chosen) {
+ DBG(" of_chosen is NULL !\n");
+ return -ENODEV;
+ }
+
+ if (legacy_serial_console < 0) {
+ DBG(" legacy_serial_console not found !\n");
+ return -ENODEV;
+ }
+ /* We are getting a weird phandle from OF ... */
+ /* ... So use the full path instead */
+ name = of_get_property(of_chosen, "linux,stdout-path", NULL);
+ if (name == NULL) {
+ DBG(" no linux,stdout-path !\n");
+ return -ENODEV;
+ }
+ prom_stdout = of_find_node_by_path(name);
+ if (!prom_stdout) {
+ DBG(" can't find stdout package %s !\n", name);
+ return -ENODEV;
+ }
+ DBG("stdout is %s\n", prom_stdout->full_name);
+
+ name = of_get_property(prom_stdout, "name", NULL);
+ if (!name) {
+ DBG(" stdout package has no name !\n");
+ goto not_found;
+ }
+ spd = of_get_property(prom_stdout, "current-speed", NULL);
+ if (spd)
+ speed = be32_to_cpup(spd);
+
+ if (strcmp(name, "serial") != 0)
+ goto not_found;
+
+ /* Look for it in probed array */
+ for (i = 0; i < legacy_serial_count; i++) {
+ if (prom_stdout != legacy_serial_infos[i].np)
+ continue;
+ offset = i;
+ speed = legacy_serial_infos[i].speed;
+ break;
+ }
+ if (i >= legacy_serial_count)
+ goto not_found;
+
+ of_node_put(prom_stdout);
+
+ DBG("Found serial console at ttyS%d\n", offset);
+
+ if (speed) {
+ static char __initdata opt[16];
+ sprintf(opt, "%d", speed);
+ return add_preferred_console("ttyS", offset, opt);
+ } else
+ return add_preferred_console("ttyS", offset, NULL);
+
+ not_found:
+ DBG("No preferred console found !\n");
+ of_node_put(prom_stdout);
+ return -ENODEV;
+}
+console_initcall(check_legacy_serial_console);
+
+#endif /* CONFIG_SERIAL_8250_CONSOLE */