1 files changed, 359 insertions, 0 deletions
diff --git a/arch/powerpc/platforms/86xx/mpc8610_hpcd.c b/arch/powerpc/platforms/86xx/mpc8610_hpcd.c
new file mode 100644
index 000000000..55413a547
--- /dev/null
+++ b/arch/powerpc/platforms/86xx/mpc8610_hpcd.c
@@ -0,0 +1,359 @@
+/*
+ * MPC8610 HPCD board specific routines
+ *
+ * Initial author: Xianghua Xiao <x.xiao@freescale.com>
+ * Recode: Jason Jin <jason.jin@freescale.com>
+ *         York Sun <yorksun@freescale.com>
+ *
+ * Rewrite the interrupt routing. remove the 8259PIC support,
+ * All the integrated device in ULI use sideband interrupt.
+ *
+ * Copyright 2008 Freescale Semiconductor Inc.
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/stddef.h>
+#include <linux/kernel.h>
+#include <linux/pci.h>
+#include <linux/interrupt.h>
+#include <linux/kdev_t.h>
+#include <linux/delay.h>
+#include <linux/seq_file.h>
+#include <linux/of.h>
+
+#include <asm/time.h>
+#include <asm/machdep.h>
+#include <asm/pci-bridge.h>
+#include <asm/prom.h>
+#include <mm/mmu_decl.h>
+#include <asm/udbg.h>
+
+#include <asm/mpic.h>
+
+#include <linux/of_platform.h>
+#include <sysdev/fsl_pci.h>
+#include <sysdev/fsl_soc.h>
+#include <sysdev/simple_gpio.h>
+#include <asm/fsl_guts.h>
+
+#include "mpc86xx.h"
+
+static struct device_node *pixis_node;
+static unsigned char *pixis_bdcfg0, *pixis_arch;
+
+/* DIU Pixel Clock bits of the CLKDVDR Global Utilities register */
+#define CLKDVDR_PXCKEN		0x80000000
+#define CLKDVDR_PXCKINV		0x10000000
+#define CLKDVDR_PXCKDLY		0x06000000
+#define CLKDVDR_PXCLK_MASK	0x001F0000
+
+#ifdef CONFIG_SUSPEND
+static irqreturn_t mpc8610_sw9_irq(int irq, void *data)
+{
+	pr_debug("%s: PIXIS' event (sw9/wakeup) IRQ handled\n", __func__);
+	return IRQ_HANDLED;
+}
+
+static void __init mpc8610_suspend_init(void)
+{
+	int irq;
+	int ret;
+
+	if (!pixis_node)
+		return;
+
+	irq = irq_of_parse_and_map(pixis_node, 0);
+	if (!irq) {
+		pr_err("%s: can't map pixis event IRQ.\n", __func__);
+		return;
+	}
+
+	ret = request_irq(irq, mpc8610_sw9_irq, 0, "sw9:wakeup", NULL);
+	if (ret) {
+		pr_err("%s: can't request pixis event IRQ: %d\n",
+		       __func__, ret);
+		irq_dispose_mapping(irq);
+	}
+
+	enable_irq_wake(irq);
+}
+#else
+static inline void mpc8610_suspend_init(void) { }
+#endif /* CONFIG_SUSPEND */
+
+static const struct of_device_id mpc8610_ids[] __initconst = {
+	{ .compatible = "fsl,mpc8610-immr", },
+	{ .compatible = "fsl,mpc8610-guts", },
+	{ .compatible = "simple-bus", },
+	/* So that the DMA channel nodes can be probed individually: */
+	{ .compatible = "fsl,eloplus-dma", },
+	/* PCI controllers */
+	{ .compatible = "fsl,mpc8610-pci", },
+	{ .compatible = "fsl,mpc8641-pcie", },
+	{}
+};
+
+static int __init mpc8610_declare_of_platform_devices(void)
+{
+	/* Firstly, register PIXIS GPIOs. */
+	simple_gpiochip_init("fsl,fpga-pixis-gpio-bank");
+
+	/* Enable wakeup on PIXIS' event IRQ. */
+	mpc8610_suspend_init();
+
+	/* Without this call, the SSI device driver won't get probed. */
+	of_platform_bus_probe(NULL, mpc8610_ids, NULL);
+
+	return 0;
+}
+machine_arch_initcall(mpc86xx_hpcd, mpc8610_declare_of_platform_devices);
+
+#if defined(CONFIG_FB_FSL_DIU) || defined(CONFIG_FB_FSL_DIU_MODULE)
+
+/*
+ * DIU Area Descriptor
+ *
+ * The MPC8610 reference manual shows the bits of the AD register in
+ * little-endian order, which causes the BLUE_C field to be split into two
+ * parts. To simplify the definition of the MAKE_AD() macro, we define the
+ * fields in big-endian order and byte-swap the result.
+ *
+ * So even though the registers don't look like they're in the
+ * same bit positions as they are on the P1022, the same value is written to
+ * the AD register on the MPC8610 and on the P1022.
+ */
+#define AD_BYTE_F		0x10000000
+#define AD_ALPHA_C_MASK		0x0E000000
+#define AD_ALPHA_C_SHIFT	25
+#define AD_BLUE_C_MASK		0x01800000
+#define AD_BLUE_C_SHIFT		23
+#define AD_GREEN_C_MASK		0x00600000
+#define AD_GREEN_C_SHIFT	21
+#define AD_RED_C_MASK		0x00180000
+#define AD_RED_C_SHIFT		19
+#define AD_PALETTE		0x00040000
+#define AD_PIXEL_S_MASK		0x00030000
+#define AD_PIXEL_S_SHIFT	16
+#define AD_COMP_3_MASK		0x0000F000
+#define AD_COMP_3_SHIFT		12
+#define AD_COMP_2_MASK		0x00000F00
+#define AD_COMP_2_SHIFT		8
+#define AD_COMP_1_MASK		0x000000F0
+#define AD_COMP_1_SHIFT		4
+#define AD_COMP_0_MASK		0x0000000F
+#define AD_COMP_0_SHIFT		0
+
+#define MAKE_AD(alpha, red, blue, green, size, c0, c1, c2, c3) \
+	cpu_to_le32(AD_BYTE_F | (alpha << AD_ALPHA_C_SHIFT) | \
+	(blue << AD_BLUE_C_SHIFT) | (green << AD_GREEN_C_SHIFT) | \
+	(red << AD_RED_C_SHIFT) | (c3 << AD_COMP_3_SHIFT) | \
+	(c2 << AD_COMP_2_SHIFT) | (c1 << AD_COMP_1_SHIFT) | \
+	(c0 << AD_COMP_0_SHIFT) | (size << AD_PIXEL_S_SHIFT))
+
+u32 mpc8610hpcd_get_pixel_format(enum fsl_diu_monitor_port port,
+				 unsigned int bits_per_pixel)
+{
+	static const u32 pixelformat[][3] = {
+		{
+			MAKE_AD(3, 0, 2, 1, 3, 8, 8, 8, 8),
+			MAKE_AD(4, 2, 0, 1, 2, 8, 8, 8, 0),
+			MAKE_AD(4, 0, 2, 1, 1, 5, 6, 5, 0)
+		},
+		{
+			MAKE_AD(3, 2, 0, 1, 3, 8, 8, 8, 8),
+			MAKE_AD(4, 0, 2, 1, 2, 8, 8, 8, 0),
+			MAKE_AD(4, 2, 0, 1, 1, 5, 6, 5, 0)
+		},
+	};
+	unsigned int arch_monitor;
+
+	/* The DVI port is mis-wired on revision 1 of this board. */
+	arch_monitor =
+		((*pixis_arch == 0x01) && (port == FSL_DIU_PORT_DVI)) ? 0 : 1;
+
+	switch (bits_per_pixel) {
+	case 32:
+		return pixelformat[arch_monitor][0];
+	case 24:
+		return pixelformat[arch_monitor][1];
+	case 16:
+		return pixelformat[arch_monitor][2];
+	default:
+		pr_err("fsl-diu: unsupported pixel depth %u\n", bits_per_pixel);
+		return 0;
+	}
+}
+
+void mpc8610hpcd_set_gamma_table(enum fsl_diu_monitor_port port,
+				 char *gamma_table_base)
+{
+	int i;
+	if (port == FSL_DIU_PORT_DLVDS) {
+		for (i = 0; i < 256*3; i++)
+			gamma_table_base[i] = (gamma_table_base[i] << 2) |
+					 ((gamma_table_base[i] >> 6) & 0x03);
+	}
+}
+
+#define PX_BRDCFG0_DVISEL	(1 << 3)
+#define PX_BRDCFG0_DLINK	(1 << 4)
+#define PX_BRDCFG0_DIU_MASK	(PX_BRDCFG0_DVISEL | PX_BRDCFG0_DLINK)
+
+void mpc8610hpcd_set_monitor_port(enum fsl_diu_monitor_port port)
+{
+	switch (port) {
+	case FSL_DIU_PORT_DVI:
+		clrsetbits_8(pixis_bdcfg0, PX_BRDCFG0_DIU_MASK,
+			     PX_BRDCFG0_DVISEL | PX_BRDCFG0_DLINK);
+		break;
+	case FSL_DIU_PORT_LVDS:
+		clrsetbits_8(pixis_bdcfg0, PX_BRDCFG0_DIU_MASK,
+			     PX_BRDCFG0_DLINK);
+		break;
+	case FSL_DIU_PORT_DLVDS:
+		clrbits8(pixis_bdcfg0, PX_BRDCFG0_DIU_MASK);
+		break;
+	}
+}
+
+/**
+ * mpc8610hpcd_set_pixel_clock: program the DIU's clock
+ *
+ * @pixclock: the wavelength, in picoseconds, of the clock
+ */
+void mpc8610hpcd_set_pixel_clock(unsigned int pixclock)
+{
+	struct device_node *guts_np = NULL;
+	struct ccsr_guts __iomem *guts;
+	unsigned long freq;
+	u64 temp;
+	u32 pxclk;
+
+	/* Map the global utilities registers. */
+	guts_np = of_find_compatible_node(NULL, NULL, "fsl,mpc8610-guts");
+	if (!guts_np) {
+		pr_err("mpc8610hpcd: missing global utilities device node\n");
+		return;
+	}
+
+	guts = of_iomap(guts_np, 0);
+	of_node_put(guts_np);
+	if (!guts) {
+		pr_err("mpc8610hpcd: could not map global utilities device\n");
+		return;
+	}
+
+	/* Convert pixclock from a wavelength to a frequency */
+	temp = 1000000000000ULL;
+	do_div(temp, pixclock);
+	freq = temp;
+
+	/*
+	 * 'pxclk' is the ratio of the platform clock to the pixel clock.
+	 * On the MPC8610, the value programmed into CLKDVDR is the ratio
+	 * minus one.  The valid range of values is 2-31.
+	 */
+	pxclk = DIV_ROUND_CLOSEST(fsl_get_sys_freq(), freq) - 1;
+	pxclk = clamp_t(u32, pxclk, 2, 31);
+
+	/* Disable the pixel clock, and set it to non-inverted and no delay */
+	clrbits32(&guts->clkdvdr,
+		  CLKDVDR_PXCKEN | CLKDVDR_PXCKDLY | CLKDVDR_PXCLK_MASK);
+
+	/* Enable the clock and set the pxclk */
+	setbits32(&guts->clkdvdr, CLKDVDR_PXCKEN | (pxclk << 16));
+
+	iounmap(guts);
+}
+
+enum fsl_diu_monitor_port
+mpc8610hpcd_valid_monitor_port(enum fsl_diu_monitor_port port)
+{
+	return port;
+}
+
+#endif
+
+static void __init mpc86xx_hpcd_setup_arch(void)
+{
+	struct resource r;
+	unsigned char *pixis;
+
+	if (ppc_md.progress)
+		ppc_md.progress("mpc86xx_hpcd_setup_arch()", 0);
+
+	fsl_pci_assign_primary();
+
+#if defined(CONFIG_FB_FSL_DIU) || defined(CONFIG_FB_FSL_DIU_MODULE)
+	diu_ops.get_pixel_format	= mpc8610hpcd_get_pixel_format;
+	diu_ops.set_gamma_table		= mpc8610hpcd_set_gamma_table;
+	diu_ops.set_monitor_port	= mpc8610hpcd_set_monitor_port;
+	diu_ops.set_pixel_clock		= mpc8610hpcd_set_pixel_clock;
+	diu_ops.valid_monitor_port	= mpc8610hpcd_valid_monitor_port;
+#endif
+
+	pixis_node = of_find_compatible_node(NULL, NULL, "fsl,fpga-pixis");
+	if (pixis_node) {
+		of_address_to_resource(pixis_node, 0, &r);
+		of_node_put(pixis_node);
+		pixis = ioremap(r.start, 32);
+		if (!pixis) {
+			printk(KERN_ERR "Err: can't map FPGA cfg register!\n");
+			return;
+		}
+		pixis_bdcfg0 = pixis + 8;
+		pixis_arch = pixis + 1;
+	} else
+		printk(KERN_ERR "Err: "
+				"can't find device node 'fsl,fpga-pixis'\n");
+
+	printk("MPC86xx HPCD board from Freescale Semiconductor\n");
+}
+
+/*
+ * Called very early, device-tree isn't unflattened
+ */
+static int __init mpc86xx_hpcd_probe(void)
+{
+	unsigned long root = of_get_flat_dt_root();
+
+	if (of_flat_dt_is_compatible(root, "fsl,MPC8610HPCD"))
+		return 1;	/* Looks good */
+
+	return 0;
+}
+
+static long __init mpc86xx_time_init(void)
+{
+	unsigned int temp;
+
+	/* Set the time base to zero */
+	mtspr(SPRN_TBWL, 0);
+	mtspr(SPRN_TBWU, 0);
+
+	temp = mfspr(SPRN_HID0);
+	temp |= HID0_TBEN;
+	mtspr(SPRN_HID0, temp);
+	asm volatile("isync");
+
+	return 0;
+}
+
+define_machine(mpc86xx_hpcd) {
+	.name			= "MPC86xx HPCD",
+	.probe			= mpc86xx_hpcd_probe,
+	.setup_arch		= mpc86xx_hpcd_setup_arch,
+	.init_IRQ		= mpc86xx_init_irq,
+	.get_irq		= mpic_get_irq,
+	.restart		= fsl_rstcr_restart,
+	.time_init		= mpc86xx_time_init,
+	.calibrate_decr		= generic_calibrate_decr,
+	.progress		= udbg_progress,
+#ifdef CONFIG_PCI
+	.pcibios_fixup_bus	= fsl_pcibios_fixup_bus,
+#endif
+};