diff options
Diffstat (limited to 'arch/s390/kernel/entry.S')
| -rw-r--r-- | arch/s390/kernel/entry.S | 230 |
1 files changed, 95 insertions, 135 deletions
diff --git a/arch/s390/kernel/entry.S b/arch/s390/kernel/entry.S index 582fe44ab..857b6526d 100644 --- a/arch/s390/kernel/entry.S +++ b/arch/s390/kernel/entry.S @@ -20,8 +20,9 @@ #include <asm/page.h> #include <asm/sigp.h> #include <asm/irq.h> -#include <asm/fpu-internal.h> #include <asm/vx-insn.h> +#include <asm/setup.h> +#include <asm/nmi.h> __PT_R0 = __PT_GPRS __PT_R1 = __PT_GPRS + 8 @@ -139,6 +140,28 @@ _PIF_WORK = (_PIF_PER_TRAP) #endif .endm + /* + * The TSTMSK macro generates a test-under-mask instruction by + * calculating the memory offset for the specified mask value. + * Mask value can be any constant. The macro shifts the mask + * value to calculate the memory offset for the test-under-mask + * instruction. + */ + .macro TSTMSK addr, mask, size=8, bytepos=0 + .if (\bytepos < \size) && (\mask >> 8) + .if (\mask & 0xff) + .error "Mask exceeds byte boundary" + .endif + TSTMSK \addr, "(\mask >> 8)", \size, "(\bytepos + 1)" + .exitm + .endif + .ifeq \mask + .error "Mask must not be zero" + .endif + off = \size - \bytepos - 1 + tm off+\addr, \mask + .endm + .section .kprobes.text, "ax" /* @@ -164,8 +187,11 @@ ENTRY(__switch_to) stg %r15,__LC_KERNEL_STACK # store end of kernel stack lg %r15,__THREAD_ksp(%r1) # load kernel stack of next lctl %c4,%c4,__TASK_pid(%r3) # load pid to control reg. 4 - mvc __LC_CURRENT_PID+4(4,%r0),__TASK_pid(%r3) # store pid of next + mvc __LC_CURRENT_PID(4,%r0),__TASK_pid(%r3) # store pid of next lmg %r6,%r15,__SF_GPRS(%r15) # load gprs of next task + TSTMSK __LC_MACHINE_FLAGS,MACHINE_FLAG_LPP + bzr %r14 + .insn s,0xb2800000,__LC_LPP # set program parameter br %r14 .L__critical_start: @@ -180,8 +206,8 @@ ENTRY(sie64a) stmg %r6,%r14,__SF_GPRS(%r15) # save kernel registers stg %r2,__SF_EMPTY(%r15) # save control block pointer stg %r3,__SF_EMPTY+8(%r15) # save guest register save area - xc __SF_EMPTY+16(16,%r15),__SF_EMPTY+16(%r15) # host id & reason - tm __LC_CPU_FLAGS+7,_CIF_FPU # load guest fp/vx registers ? + xc __SF_EMPTY+16(8,%r15),__SF_EMPTY+16(%r15) # reason code = 0 + TSTMSK __LC_CPU_FLAGS,_CIF_FPU # load guest fp/vx registers ? jno .Lsie_load_guest_gprs brasl %r14,load_fpu_regs # load guest fp/vx regs .Lsie_load_guest_gprs: @@ -195,16 +221,9 @@ ENTRY(sie64a) oi __SIE_PROG0C+3(%r14),1 # we are going into SIE now tm __SIE_PROG20+3(%r14),3 # last exit... jnz .Lsie_skip - tm __LC_CPU_FLAGS+7,_CIF_FPU + TSTMSK __LC_CPU_FLAGS,_CIF_FPU jo .Lsie_skip # exit if fp/vx regs changed - tm __LC_MACHINE_FLAGS+6,0x20 # MACHINE_FLAG_LPP - jz .Lsie_enter - .insn s,0xb2800000,__LC_CURRENT_PID # set guest id to pid -.Lsie_enter: sie 0(%r14) - tm __LC_MACHINE_FLAGS+6,0x20 # MACHINE_FLAG_LPP - jz .Lsie_skip - .insn s,0xb2800000,__SF_EMPTY+16(%r15)# set host id .Lsie_skip: ni __SIE_PROG0C+3(%r14),0xfe # no longer in SIE lctlg %c1,%c1,__LC_USER_ASCE # load primary asce @@ -221,11 +240,11 @@ sie_exit: lg %r14,__SF_EMPTY+8(%r15) # load guest register save area stmg %r0,%r13,0(%r14) # save guest gprs 0-13 lmg %r6,%r14,__SF_GPRS(%r15) # restore kernel registers - lg %r2,__SF_EMPTY+24(%r15) # return exit reason code + lg %r2,__SF_EMPTY+16(%r15) # return exit reason code br %r14 .Lsie_fault: lghi %r14,-EFAULT - stg %r14,__SF_EMPTY+24(%r15) # set exit reason code + stg %r14,__SF_EMPTY+16(%r15) # set exit reason code j sie_exit EX_TABLE(.Lrewind_pad,.Lsie_fault) @@ -271,7 +290,7 @@ ENTRY(system_call) stg %r2,__PT_ORIG_GPR2(%r11) stg %r7,STACK_FRAME_OVERHEAD(%r15) lgf %r9,0(%r8,%r10) # get system call add. - tm __TI_flags+7(%r12),_TIF_TRACE + TSTMSK __TI_flags(%r12),_TIF_TRACE jnz .Lsysc_tracesys basr %r14,%r9 # call sys_xxxx stg %r2,__PT_R2(%r11) # store return value @@ -279,11 +298,11 @@ ENTRY(system_call) .Lsysc_return: LOCKDEP_SYS_EXIT .Lsysc_tif: - tm __PT_FLAGS+7(%r11),_PIF_WORK + TSTMSK __PT_FLAGS(%r11),_PIF_WORK jnz .Lsysc_work - tm __TI_flags+7(%r12),_TIF_WORK + TSTMSK __TI_flags(%r12),_TIF_WORK jnz .Lsysc_work # check for work - tm __LC_CPU_FLAGS+7,_CIF_WORK + TSTMSK __LC_CPU_FLAGS,_CIF_WORK jnz .Lsysc_work .Lsysc_restore: lg %r14,__LC_VDSO_PER_CPU @@ -299,23 +318,23 @@ ENTRY(system_call) # One of the work bits is on. Find out which one. # .Lsysc_work: - tm __LC_CPU_FLAGS+7,_CIF_MCCK_PENDING + TSTMSK __LC_CPU_FLAGS,_CIF_MCCK_PENDING jo .Lsysc_mcck_pending - tm __TI_flags+7(%r12),_TIF_NEED_RESCHED + TSTMSK __TI_flags(%r12),_TIF_NEED_RESCHED jo .Lsysc_reschedule #ifdef CONFIG_UPROBES - tm __TI_flags+7(%r12),_TIF_UPROBE + TSTMSK __TI_flags(%r12),_TIF_UPROBE jo .Lsysc_uprobe_notify #endif - tm __PT_FLAGS+7(%r11),_PIF_PER_TRAP + TSTMSK __PT_FLAGS(%r11),_PIF_PER_TRAP jo .Lsysc_singlestep - tm __TI_flags+7(%r12),_TIF_SIGPENDING + TSTMSK __TI_flags(%r12),_TIF_SIGPENDING jo .Lsysc_sigpending - tm __TI_flags+7(%r12),_TIF_NOTIFY_RESUME + TSTMSK __TI_flags(%r12),_TIF_NOTIFY_RESUME jo .Lsysc_notify_resume - tm __LC_CPU_FLAGS+7,_CIF_FPU + TSTMSK __LC_CPU_FLAGS,_CIF_FPU jo .Lsysc_vxrs - tm __LC_CPU_FLAGS+7,_CIF_ASCE + TSTMSK __LC_CPU_FLAGS,_CIF_ASCE jo .Lsysc_uaccess j .Lsysc_return # beware of critical section cleanup @@ -354,7 +373,7 @@ ENTRY(system_call) .Lsysc_sigpending: lgr %r2,%r11 # pass pointer to pt_regs brasl %r14,do_signal - tm __PT_FLAGS+7(%r11),_PIF_SYSCALL + TSTMSK __PT_FLAGS(%r11),_PIF_SYSCALL jno .Lsysc_return lmg %r2,%r7,__PT_R2(%r11) # load svc arguments lg %r10,__TI_sysc_table(%r12) # address of system call table @@ -414,7 +433,7 @@ ENTRY(system_call) basr %r14,%r9 # call sys_xxx stg %r2,__PT_R2(%r11) # store return value .Lsysc_tracenogo: - tm __TI_flags+7(%r12),_TIF_TRACE + TSTMSK __TI_flags(%r12),_TIF_TRACE jz .Lsysc_return lgr %r2,%r11 # pass pointer to pt_regs larl %r14,.Lsysc_return @@ -544,6 +563,8 @@ ENTRY(io_int_handler) stmg %r8,%r9,__PT_PSW(%r11) mvc __PT_INT_CODE(12,%r11),__LC_SUBCHANNEL_ID xc __PT_FLAGS(8,%r11),__PT_FLAGS(%r11) + TSTMSK __LC_CPU_FLAGS,_CIF_IGNORE_IRQ + jo .Lio_restore TRACE_IRQS_OFF xc __SF_BACKCHAIN(8,%r15),__SF_BACKCHAIN(%r15) .Lio_loop: @@ -554,7 +575,7 @@ ENTRY(io_int_handler) lghi %r3,THIN_INTERRUPT .Lio_call: brasl %r14,do_IRQ - tm __LC_MACHINE_FLAGS+6,0x10 # MACHINE_FLAG_LPAR + TSTMSK __LC_MACHINE_FLAGS,MACHINE_FLAG_LPAR jz .Lio_return tpi 0 jz .Lio_return @@ -564,9 +585,9 @@ ENTRY(io_int_handler) LOCKDEP_SYS_EXIT TRACE_IRQS_ON .Lio_tif: - tm __TI_flags+7(%r12),_TIF_WORK + TSTMSK __TI_flags(%r12),_TIF_WORK jnz .Lio_work # there is work to do (signals etc.) - tm __LC_CPU_FLAGS+7,_CIF_WORK + TSTMSK __LC_CPU_FLAGS,_CIF_WORK jnz .Lio_work .Lio_restore: lg %r14,__LC_VDSO_PER_CPU @@ -594,7 +615,7 @@ ENTRY(io_int_handler) # check for preemptive scheduling icm %r0,15,__TI_precount(%r12) jnz .Lio_restore # preemption is disabled - tm __TI_flags+7(%r12),_TIF_NEED_RESCHED + TSTMSK __TI_flags(%r12),_TIF_NEED_RESCHED jno .Lio_restore # switch to kernel stack lg %r1,__PT_R15(%r11) @@ -626,17 +647,17 @@ ENTRY(io_int_handler) # One of the work bits is on. Find out which one. # .Lio_work_tif: - tm __LC_CPU_FLAGS+7,_CIF_MCCK_PENDING + TSTMSK __LC_CPU_FLAGS,_CIF_MCCK_PENDING jo .Lio_mcck_pending - tm __TI_flags+7(%r12),_TIF_NEED_RESCHED + TSTMSK __TI_flags(%r12),_TIF_NEED_RESCHED jo .Lio_reschedule - tm __TI_flags+7(%r12),_TIF_SIGPENDING + TSTMSK __TI_flags(%r12),_TIF_SIGPENDING jo .Lio_sigpending - tm __TI_flags+7(%r12),_TIF_NOTIFY_RESUME + TSTMSK __TI_flags(%r12),_TIF_NOTIFY_RESUME jo .Lio_notify_resume - tm __LC_CPU_FLAGS+7,_CIF_FPU + TSTMSK __LC_CPU_FLAGS,_CIF_FPU jo .Lio_vxrs - tm __LC_CPU_FLAGS+7,_CIF_ASCE + TSTMSK __LC_CPU_FLAGS,_CIF_ASCE jo .Lio_uaccess j .Lio_return # beware of critical section cleanup @@ -719,6 +740,8 @@ ENTRY(ext_int_handler) mvc __PT_INT_PARM(4,%r11),__LC_EXT_PARAMS mvc __PT_INT_PARM_LONG(8,%r11),0(%r1) xc __PT_FLAGS(8,%r11),__PT_FLAGS(%r11) + TSTMSK __LC_CPU_FLAGS,_CIF_IGNORE_IRQ + jo .Lio_restore TRACE_IRQS_OFF xc __SF_BACKCHAIN(8,%r15),__SF_BACKCHAIN(%r15) lgr %r2,%r11 # pass pointer to pt_regs @@ -748,27 +771,22 @@ ENTRY(psw_idle) br %r14 .Lpsw_idle_end: -/* Store floating-point controls and floating-point or vector extension - * registers instead. A critical section cleanup assures that the registers - * are stored even if interrupted for some other work. The register %r2 - * designates a struct fpu to store register contents. If the specified - * structure does not contain a register save area, the register store is - * omitted (see also comments in arch_dup_task_struct()). - * - * The CIF_FPU flag is set in any case. The CIF_FPU triggers a lazy restore - * of the register contents at system call or io return. +/* + * Store floating-point controls and floating-point or vector register + * depending whether the vector facility is available. A critical section + * cleanup assures that the registers are stored even if interrupted for + * some other work. The CIF_FPU flag is set to trigger a lazy restore + * of the register contents at return from io or a system call. */ ENTRY(save_fpu_regs) lg %r2,__LC_CURRENT aghi %r2,__TASK_thread - tm __LC_CPU_FLAGS+7,_CIF_FPU + TSTMSK __LC_CPU_FLAGS,_CIF_FPU bor %r14 stfpc __THREAD_FPU_fpc(%r2) .Lsave_fpu_regs_fpc_end: lg %r3,__THREAD_FPU_regs(%r2) - ltgr %r3,%r3 - jz .Lsave_fpu_regs_done # no save area -> set CIF_FPU - tm __THREAD_FPU_flags+3(%r2),FPU_USE_VX + TSTMSK __LC_MACHINE_FLAGS,MACHINE_FLAG_VX jz .Lsave_fpu_regs_fp # no -> store FP regs .Lsave_fpu_regs_vx_low: VSTM %v0,%v15,0,%r3 # vstm 0,15,0(3) @@ -797,41 +815,30 @@ ENTRY(save_fpu_regs) br %r14 .Lsave_fpu_regs_end: -/* Load floating-point controls and floating-point or vector extension - * registers. A critical section cleanup assures that the register contents - * are loaded even if interrupted for some other work. Depending on the saved - * FP/VX state, the vector-enablement control, CR0.46, is either set or cleared. +/* + * Load floating-point controls and floating-point or vector registers. + * A critical section cleanup assures that the register contents are + * loaded even if interrupted for some other work. * * There are special calling conventions to fit into sysc and io return work: * %r15: <kernel stack> * The function requires: - * %r4 and __SF_EMPTY+32(%r15) + * %r4 */ load_fpu_regs: lg %r4,__LC_CURRENT aghi %r4,__TASK_thread - tm __LC_CPU_FLAGS+7,_CIF_FPU + TSTMSK __LC_CPU_FLAGS,_CIF_FPU bnor %r14 lfpc __THREAD_FPU_fpc(%r4) - stctg %c0,%c0,__SF_EMPTY+32(%r15) # store CR0 - tm __THREAD_FPU_flags+3(%r4),FPU_USE_VX # VX-enabled task ? + TSTMSK __LC_MACHINE_FLAGS,MACHINE_FLAG_VX lg %r4,__THREAD_FPU_regs(%r4) # %r4 <- reg save area - jz .Lload_fpu_regs_fp_ctl # -> no VX, load FP regs -.Lload_fpu_regs_vx_ctl: - tm __SF_EMPTY+32+5(%r15),2 # test VX control - jo .Lload_fpu_regs_vx - oi __SF_EMPTY+32+5(%r15),2 # set VX control - lctlg %c0,%c0,__SF_EMPTY+32(%r15) + jz .Lload_fpu_regs_fp # -> no VX, load FP regs .Lload_fpu_regs_vx: VLM %v0,%v15,0,%r4 .Lload_fpu_regs_vx_high: VLM %v16,%v31,256,%r4 j .Lload_fpu_regs_done -.Lload_fpu_regs_fp_ctl: - tm __SF_EMPTY+32+5(%r15),2 # test VX control - jz .Lload_fpu_regs_fp - ni __SF_EMPTY+32+5(%r15),253 # clear VX control - lctlg %c0,%c0,__SF_EMPTY+32(%r15) .Lload_fpu_regs_fp: ld 0,0(%r4) ld 1,8(%r4) @@ -854,16 +861,6 @@ load_fpu_regs: br %r14 .Lload_fpu_regs_end: -/* Test and set the vector enablement control in CR0.46 */ -ENTRY(__ctl_set_vx) - stctg %c0,%c0,__SF_EMPTY(%r15) - tm __SF_EMPTY+5(%r15),2 - bor %r14 - oi __SF_EMPTY+5(%r15),2 - lctlg %c0,%c0,__SF_EMPTY(%r15) - br %r14 -.L__ctl_set_vx_end: - .L__critical_end: /* @@ -878,11 +875,11 @@ ENTRY(mcck_int_handler) lg %r12,__LC_THREAD_INFO larl %r13,cleanup_critical lmg %r8,%r9,__LC_MCK_OLD_PSW - tm __LC_MCCK_CODE,0x80 # system damage? + TSTMSK __LC_MCCK_CODE,MCCK_CODE_SYSTEM_DAMAGE jo .Lmcck_panic # yes -> rest of mcck code invalid lghi %r14,__LC_CPU_TIMER_SAVE_AREA mvc __LC_MCCK_ENTER_TIMER(8),0(%r14) - tm __LC_MCCK_CODE+5,0x02 # stored cpu timer value valid? + TSTMSK __LC_MCCK_CODE,MCCK_CODE_CPU_TIMER_VALID jo 3f la %r14,__LC_SYNC_ENTER_TIMER clc 0(8,%r14),__LC_ASYNC_ENTER_TIMER @@ -896,7 +893,7 @@ ENTRY(mcck_int_handler) la %r14,__LC_LAST_UPDATE_TIMER 2: spt 0(%r14) mvc __LC_MCCK_ENTER_TIMER(8),0(%r14) -3: tm __LC_MCCK_CODE+2,0x09 # mwp + ia of old psw valid? +3: TSTMSK __LC_MCCK_CODE,(MCCK_CODE_PSW_MWP_VALID|MCCK_CODE_PSW_IA_VALID) jno .Lmcck_panic # no -> skip cleanup critical SWITCH_ASYNC __LC_GPREGS_SAVE_AREA+64,__LC_MCCK_ENTER_TIMER .Lmcck_skip: @@ -916,7 +913,7 @@ ENTRY(mcck_int_handler) la %r11,STACK_FRAME_OVERHEAD(%r1) lgr %r15,%r1 ssm __LC_PGM_NEW_PSW # turn dat on, keep irqs off - tm __LC_CPU_FLAGS+7,_CIF_MCCK_PENDING + TSTMSK __LC_CPU_FLAGS,_CIF_MCCK_PENDING jno .Lmcck_return TRACE_IRQS_OFF brasl %r14,s390_handle_mcck @@ -941,7 +938,10 @@ ENTRY(mcck_int_handler) # PSW restart interrupt handler # ENTRY(restart_int_handler) - stg %r15,__LC_SAVE_AREA_RESTART + TSTMSK __LC_MACHINE_FLAGS,MACHINE_FLAG_LPP + jz 0f + .insn s,0xb2800000,__LC_LPP +0: stg %r15,__LC_SAVE_AREA_RESTART lg %r15,__LC_RESTART_STACK aghi %r15,-__PT_SIZE # create pt_regs on stack xc 0(__PT_SIZE,%r15),0(%r15) @@ -1019,10 +1019,6 @@ cleanup_critical: jl 0f clg %r9,BASED(.Lcleanup_table+104) # .Lload_fpu_regs_end jl .Lcleanup_load_fpu_regs - clg %r9,BASED(.Lcleanup_table+112) # __ctl_set_vx - jl 0f - clg %r9,BASED(.Lcleanup_table+120) # .L__ctl_set_vx_end - jl .Lcleanup___ctl_set_vx 0: br %r14 .align 8 @@ -1041,8 +1037,6 @@ cleanup_critical: .quad .Lsave_fpu_regs_end .quad load_fpu_regs .quad .Lload_fpu_regs_end - .quad __ctl_set_vx - .quad .L__ctl_set_vx_end #if IS_ENABLED(CONFIG_KVM) .Lcleanup_table_sie: @@ -1051,10 +1045,7 @@ cleanup_critical: .Lcleanup_sie: lg %r9,__SF_EMPTY(%r15) # get control block pointer - tm __LC_MACHINE_FLAGS+6,0x20 # MACHINE_FLAG_LPP - jz 0f - .insn s,0xb2800000,__SF_EMPTY+16(%r15)# set host id -0: ni __SIE_PROG0C+3(%r9),0xfe # no longer in SIE + ni __SIE_PROG0C+3(%r9),0xfe # no longer in SIE lctlg %c1,%c1,__LC_USER_ASCE # load primary asce larl %r9,sie_exit # skip forward to sie_exit br %r14 @@ -1206,7 +1197,7 @@ cleanup_critical: .quad .Lpsw_idle_lpsw .Lcleanup_save_fpu_regs: - tm __LC_CPU_FLAGS+7,_CIF_FPU + TSTMSK __LC_CPU_FLAGS,_CIF_FPU bor %r14 clg %r9,BASED(.Lcleanup_save_fpu_regs_done) jhe 5f @@ -1224,9 +1215,7 @@ cleanup_critical: stfpc __THREAD_FPU_fpc(%r2) 1: # Load register save area and check if VX is active lg %r3,__THREAD_FPU_regs(%r2) - ltgr %r3,%r3 - jz 5f # no save area -> set CIF_FPU - tm __THREAD_FPU_flags+3(%r2),FPU_USE_VX + TSTMSK __LC_MACHINE_FLAGS,MACHINE_FLAG_VX jz 4f # no VX -> store FP regs 2: # Store vector registers (V0-V15) VSTM %v0,%v15,0,%r3 # vstm 0,15,0(3) @@ -1266,43 +1255,27 @@ cleanup_critical: .quad .Lsave_fpu_regs_done .Lcleanup_load_fpu_regs: - tm __LC_CPU_FLAGS+7,_CIF_FPU + TSTMSK __LC_CPU_FLAGS,_CIF_FPU bnor %r14 clg %r9,BASED(.Lcleanup_load_fpu_regs_done) jhe 1f clg %r9,BASED(.Lcleanup_load_fpu_regs_fp) jhe 2f - clg %r9,BASED(.Lcleanup_load_fpu_regs_fp_ctl) - jhe 3f clg %r9,BASED(.Lcleanup_load_fpu_regs_vx_high) - jhe 4f + jhe 3f clg %r9,BASED(.Lcleanup_load_fpu_regs_vx) - jhe 5f - clg %r9,BASED(.Lcleanup_load_fpu_regs_vx_ctl) - jhe 6f + jhe 4f lg %r4,__LC_CURRENT aghi %r4,__TASK_thread lfpc __THREAD_FPU_fpc(%r4) - tm __THREAD_FPU_flags+3(%r4),FPU_USE_VX # VX-enabled task ? + TSTMSK __LC_MACHINE_FLAGS,MACHINE_FLAG_VX lg %r4,__THREAD_FPU_regs(%r4) # %r4 <- reg save area - jz 3f # -> no VX, load FP regs -6: # Set VX-enablement control - stctg %c0,%c0,__SF_EMPTY+32(%r15) # store CR0 - tm __SF_EMPTY+32+5(%r15),2 # test VX control - jo 5f - oi __SF_EMPTY+32+5(%r15),2 # set VX control - lctlg %c0,%c0,__SF_EMPTY+32(%r15) -5: # Load V0 ..V15 registers + jz 2f # -> no VX, load FP regs +4: # Load V0 ..V15 registers VLM %v0,%v15,0,%r4 -4: # Load V16..V31 registers +3: # Load V16..V31 registers VLM %v16,%v31,256,%r4 j 1f -3: # Clear VX-enablement control for FP - stctg %c0,%c0,__SF_EMPTY+32(%r15) # store CR0 - tm __SF_EMPTY+32+5(%r15),2 # test VX control - jz 2f - ni __SF_EMPTY+32+5(%r15),253 # clear VX control - lctlg %c0,%c0,__SF_EMPTY+32(%r15) 2: # Load floating-point registers ld 0,0(%r4) ld 1,8(%r4) @@ -1324,28 +1297,15 @@ cleanup_critical: ni __LC_CPU_FLAGS+7,255-_CIF_FPU lg %r9,48(%r11) # return from load_fpu_regs br %r14 -.Lcleanup_load_fpu_regs_vx_ctl: - .quad .Lload_fpu_regs_vx_ctl .Lcleanup_load_fpu_regs_vx: .quad .Lload_fpu_regs_vx .Lcleanup_load_fpu_regs_vx_high: .quad .Lload_fpu_regs_vx_high -.Lcleanup_load_fpu_regs_fp_ctl: - .quad .Lload_fpu_regs_fp_ctl .Lcleanup_load_fpu_regs_fp: .quad .Lload_fpu_regs_fp .Lcleanup_load_fpu_regs_done: .quad .Lload_fpu_regs_done -.Lcleanup___ctl_set_vx: - stctg %c0,%c0,__SF_EMPTY(%r15) - tm __SF_EMPTY+5(%r15),2 - bor %r14 - oi __SF_EMPTY+5(%r15),2 - lctlg %c0,%c0,__SF_EMPTY(%r15) - lg %r9,48(%r11) # return from __ctl_set_vx - br %r14 - /* * Integer constants */ |