diff options
Diffstat (limited to 'arch/s390/kernel/sclp.S')
| -rw-r--r-- | arch/s390/kernel/sclp.S | 355 |
1 files changed, 0 insertions, 355 deletions
diff --git a/arch/s390/kernel/sclp.S b/arch/s390/kernel/sclp.S deleted file mode 100644 index ada0c07fe..000000000 --- a/arch/s390/kernel/sclp.S +++ /dev/null @@ -1,355 +0,0 @@ -/* - * Mini SCLP driver. - * - * Copyright IBM Corp. 2004, 2009 - * - * Author(s): Peter Oberparleiter <Peter.Oberparleiter@de.ibm.com>, - * Heiko Carstens <heiko.carstens@de.ibm.com>, - * - */ - -#include <linux/linkage.h> -#include <asm/irq.h> - -LC_EXT_NEW_PSW = 0x58 # addr of ext int handler -LC_EXT_NEW_PSW_64 = 0x1b0 # addr of ext int handler 64 bit -LC_EXT_INT_PARAM = 0x80 # addr of ext int parameter -LC_EXT_INT_CODE = 0x86 # addr of ext int code -LC_AR_MODE_ID = 0xa3 - -# -# Subroutine which waits synchronously until either an external interruption -# or a timeout occurs. -# -# Parameters: -# R2 = 0 for no timeout, non-zero for timeout in (approximated) seconds -# -# Returns: -# R2 = 0 on interrupt, 2 on timeout -# R3 = external interruption parameter if R2=0 -# - -_sclp_wait_int: - stm %r6,%r15,24(%r15) # save registers - basr %r13,0 # get base register -.LbaseS1: - ahi %r15,-96 # create stack frame - la %r8,LC_EXT_NEW_PSW # register int handler - la %r9,.LextpswS1-.LbaseS1(%r13) - tm LC_AR_MODE_ID,1 - jno .Lesa1 - la %r8,LC_EXT_NEW_PSW_64 # register int handler 64 bit - la %r9,.LextpswS1_64-.LbaseS1(%r13) -.Lesa1: - mvc .LoldpswS1-.LbaseS1(16,%r13),0(%r8) - mvc 0(16,%r8),0(%r9) - epsw %r6,%r7 # set current addressing mode - nill %r6,0x1 # in new psw (31 or 64 bit mode) - nilh %r7,0x8000 - stm %r6,%r7,0(%r8) - lhi %r6,0x0200 # cr mask for ext int (cr0.54) - ltr %r2,%r2 - jz .LsetctS1 - ahi %r6,0x0800 # cr mask for clock int (cr0.52) - stck .LtimeS1-.LbaseS1(%r13) # initiate timeout - al %r2,.LtimeS1-.LbaseS1(%r13) - st %r2,.LtimeS1-.LbaseS1(%r13) - sckc .LtimeS1-.LbaseS1(%r13) - -.LsetctS1: - stctl %c0,%c0,.LctlS1-.LbaseS1(%r13) # enable required interrupts - l %r0,.LctlS1-.LbaseS1(%r13) - lhi %r1,~(0x200 | 0x800) # clear old values - nr %r1,%r0 - or %r1,%r6 # set new value - st %r1,.LctlS1-.LbaseS1(%r13) - lctl %c0,%c0,.LctlS1-.LbaseS1(%r13) - st %r0,.LctlS1-.LbaseS1(%r13) - lhi %r2,2 # return code for timeout -.LloopS1: - lpsw .LwaitpswS1-.LbaseS1(%r13) # wait until interrupt -.LwaitS1: - lh %r7,LC_EXT_INT_CODE - chi %r7,EXT_IRQ_CLK_COMP # timeout? - je .LtimeoutS1 - chi %r7,EXT_IRQ_SERVICE_SIG # service int? - jne .LloopS1 - sr %r2,%r2 - l %r3,LC_EXT_INT_PARAM -.LtimeoutS1: - lctl %c0,%c0,.LctlS1-.LbaseS1(%r13) # restore interrupt setting - # restore old handler - mvc 0(16,%r8),.LoldpswS1-.LbaseS1(%r13) - lm %r6,%r15,120(%r15) # restore registers - br %r14 # return to caller - - .align 8 -.LoldpswS1: - .long 0, 0, 0, 0 # old ext int PSW -.LextpswS1: - .long 0x00080000, 0x80000000+.LwaitS1 # PSW to handle ext int -.LextpswS1_64: - .quad 0, .LwaitS1 # PSW to handle ext int, 64 bit -.LwaitpswS1: - .long 0x010a0000, 0x00000000+.LloopS1 # PSW to wait for ext int -.LtimeS1: - .quad 0 # current time -.LctlS1: - .long 0 # CT0 contents - -# -# Subroutine to synchronously issue a service call. -# -# Parameters: -# R2 = command word -# R3 = sccb address -# -# Returns: -# R2 = 0 on success, 1 on failure -# R3 = sccb response code if R2 = 0 -# - -_sclp_servc: - stm %r6,%r15,24(%r15) # save registers - ahi %r15,-96 # create stack frame - lr %r6,%r2 # save command word - lr %r7,%r3 # save sccb address -.LretryS2: - lhi %r2,1 # error return code - .insn rre,0xb2200000,%r6,%r7 # servc - brc 1,.LendS2 # exit if not operational - brc 8,.LnotbusyS2 # go on if not busy - sr %r2,%r2 # wait until no longer busy - bras %r14,_sclp_wait_int - j .LretryS2 # retry -.LnotbusyS2: - sr %r2,%r2 # wait until result - bras %r14,_sclp_wait_int - sr %r2,%r2 - lh %r3,6(%r7) -.LendS2: - lm %r6,%r15,120(%r15) # restore registers - br %r14 - -# -# Subroutine to set up the SCLP interface. -# -# Parameters: -# R2 = 0 to activate, non-zero to deactivate -# -# Returns: -# R2 = 0 on success, non-zero on failure -# - -_sclp_setup: - stm %r6,%r15,24(%r15) # save registers - ahi %r15,-96 # create stack frame - basr %r13,0 # get base register -.LbaseS3: - l %r6,.LsccbS0-.LbaseS3(%r13) # prepare init mask sccb - mvc 0(.LinitendS3-.LinitsccbS3,%r6),.LinitsccbS3-.LbaseS3(%r13) - ltr %r2,%r2 # initialization? - jz .LdoinitS3 # go ahead - # clear masks - xc .LinitmaskS3-.LinitsccbS3(8,%r6),.LinitmaskS3-.LinitsccbS3(%r6) -.LdoinitS3: - l %r2,.LwritemaskS3-.LbaseS3(%r13)# get command word - lr %r3,%r6 # get sccb address - bras %r14,_sclp_servc # issue service call - ltr %r2,%r2 # servc successful? - jnz .LerrorS3 - chi %r3,0x20 # write mask successful? - jne .LerrorS3 - # check masks - la %r2,.LinitmaskS3-.LinitsccbS3(%r6) - l %r1,0(%r2) # receive mask ok? - n %r1,12(%r2) - cl %r1,0(%r2) - jne .LerrorS3 - l %r1,4(%r2) # send mask ok? - n %r1,8(%r2) - cl %r1,4(%r2) - sr %r2,%r2 - je .LendS3 -.LerrorS3: - lhi %r2,1 # error return code -.LendS3: - lm %r6,%r15,120(%r15) # restore registers - br %r14 -.LwritemaskS3: - .long 0x00780005 # SCLP command for write mask -.LinitsccbS3: - .word .LinitendS3-.LinitsccbS3 - .byte 0,0,0,0 - .word 0 - .word 0 - .word 4 -.LinitmaskS3: - .long 0x80000000 - .long 0x40000000 - .long 0 - .long 0 -.LinitendS3: - -# -# Subroutine which prints a given text to the SCLP console. -# -# Parameters: -# R2 = address of nil-terminated ASCII text -# -# Returns: -# R2 = 0 on success, 1 on failure -# - -_sclp_print: - stm %r6,%r15,24(%r15) # save registers - ahi %r15,-96 # create stack frame - basr %r13,0 # get base register -.LbaseS4: - l %r8,.LsccbS0-.LbaseS4(%r13) # prepare write data sccb - mvc 0(.LmtoS4-.LwritesccbS4,%r8),.LwritesccbS4-.LbaseS4(%r13) - la %r7,.LmtoS4-.LwritesccbS4(%r8) # current mto addr - sr %r0,%r0 - l %r10,.Lascebc-.LbaseS4(%r13) # address of translation table -.LinitmtoS4: - # initialize mto - mvc 0(.LmtoendS4-.LmtoS4,%r7),.LmtoS4-.LbaseS4(%r13) - lhi %r6,.LmtoendS4-.LmtoS4 # current mto length -.LloopS4: - ic %r0,0(%r2) # get character - ahi %r2,1 - ltr %r0,%r0 # end of string? - jz .LfinalizemtoS4 - chi %r0,0x0a # end of line (NL)? - jz .LfinalizemtoS4 - stc %r0,0(%r6,%r7) # copy to mto - la %r11,0(%r6,%r7) - tr 0(1,%r11),0(%r10) # translate to EBCDIC - ahi %r6,1 - j .LloopS4 -.LfinalizemtoS4: - sth %r6,0(%r7) # update mto length - lh %r9,.LmdbS4-.LwritesccbS4(%r8) # update mdb length - ar %r9,%r6 - sth %r9,.LmdbS4-.LwritesccbS4(%r8) - lh %r9,.LevbufS4-.LwritesccbS4(%r8)# update evbuf length - ar %r9,%r6 - sth %r9,.LevbufS4-.LwritesccbS4(%r8) - lh %r9,0(%r8) # update sccb length - ar %r9,%r6 - sth %r9,0(%r8) - ar %r7,%r6 # update current mto address - ltr %r0,%r0 # more characters? - jnz .LinitmtoS4 - l %r2,.LwritedataS4-.LbaseS4(%r13)# write data - lr %r3,%r8 - bras %r14,_sclp_servc - ltr %r2,%r2 # servc successful? - jnz .LendS4 - chi %r3,0x20 # write data successful? - je .LendS4 - lhi %r2,1 # error return code -.LendS4: - lm %r6,%r15,120(%r15) # restore registers - br %r14 - -# -# Function which prints a given text to the SCLP console. -# -# Parameters: -# R2 = address of nil-terminated ASCII text -# -# Returns: -# R2 = 0 on success, 1 on failure -# - -ENTRY(_sclp_print_early) - stm %r6,%r15,24(%r15) # save registers - ahi %r15,-96 # create stack frame - tm LC_AR_MODE_ID,1 - jno .Lesa2 - ahi %r15,-80 - stmh %r6,%r15,96(%r15) # store upper register halves - basr %r13,0 - lmh %r0,%r15,.Lzeroes-.(%r13) # clear upper register halves -.Lesa2: - lr %r10,%r2 # save string pointer - lhi %r2,0 - bras %r14,_sclp_setup # enable console - ltr %r2,%r2 - jnz .LendS5 - lr %r2,%r10 - bras %r14,_sclp_print # print string - ltr %r2,%r2 - jnz .LendS5 - lhi %r2,1 - bras %r14,_sclp_setup # disable console -.LendS5: - tm LC_AR_MODE_ID,1 - jno .Lesa3 - lgfr %r2,%r2 # sign extend return value - lmh %r6,%r15,96(%r15) # restore upper register halves - ahi %r15,80 -.Lesa3: - lm %r6,%r15,120(%r15) # restore registers - br %r14 -.Lzeroes: - .fill 64,4,0 - -.LwritedataS4: - .long 0x00760005 # SCLP command for write data -.LwritesccbS4: - # sccb - .word .LmtoS4-.LwritesccbS4 - .byte 0 - .byte 0,0,0 - .word 0 - - # evbuf -.LevbufS4: - .word .LmtoS4-.LevbufS4 - .byte 0x02 - .byte 0 - .word 0 - -.LmdbS4: - # mdb - .word .LmtoS4-.LmdbS4 - .word 1 - .long 0xd4c4c240 - .long 1 - - # go -.LgoS4: - .word .LmtoS4-.LgoS4 - .word 1 - .long 0 - .byte 0,0,0,0,0,0,0,0 - .byte 0,0,0 - .byte 0 - .byte 0,0,0,0,0,0,0 - .byte 0 - .word 0 - .byte 0,0,0,0,0,0,0,0,0,0 - .byte 0,0,0,0,0,0,0,0 - .byte 0,0,0,0,0,0,0,0 - -.LmtoS4: - .word .LmtoendS4-.LmtoS4 - .word 4 - .word 0x1000 - .byte 0 - .byte 0,0,0 -.LmtoendS4: - - # Global constants -.LsccbS0: - .long _sclp_work_area -.Lascebc: - .long _ascebc - -.section .data,"aw",@progbits - .balign 4096 -_sclp_work_area: - .fill 4096 -.previous |