diff options
Diffstat (limited to 'arch/sh/Kconfig')
| -rw-r--r-- | arch/sh/Kconfig | 889 |
1 files changed, 889 insertions, 0 deletions
diff --git a/arch/sh/Kconfig b/arch/sh/Kconfig new file mode 100644 index 000000000..50057fed8 --- /dev/null +++ b/arch/sh/Kconfig @@ -0,0 +1,889 @@ +config SUPERH + def_bool y + select ARCH_MIGHT_HAVE_PC_PARPORT + select HAVE_PATA_PLATFORM + select CLKDEV_LOOKUP + select HAVE_IDE if HAS_IOPORT_MAP + select HAVE_MEMBLOCK + select HAVE_MEMBLOCK_NODE_MAP + select ARCH_DISCARD_MEMBLOCK + select HAVE_OPROFILE + select HAVE_GENERIC_DMA_COHERENT + select HAVE_ARCH_TRACEHOOK + select HAVE_DMA_API_DEBUG + select HAVE_DMA_ATTRS + select HAVE_PERF_EVENTS + select HAVE_DEBUG_BUGVERBOSE + select ARCH_HAVE_CUSTOM_GPIO_H + select ARCH_HAVE_NMI_SAFE_CMPXCHG if (GUSA_RB || CPU_SH4A) + select ARCH_HAS_GCOV_PROFILE_ALL + select PERF_USE_VMALLOC + select HAVE_DEBUG_KMEMLEAK + select HAVE_KERNEL_GZIP + select HAVE_KERNEL_BZIP2 + select HAVE_KERNEL_LZMA + select HAVE_KERNEL_XZ + select HAVE_KERNEL_LZO + select HAVE_UID16 + select ARCH_WANT_IPC_PARSE_VERSION + select HAVE_SYSCALL_TRACEPOINTS + select HAVE_REGS_AND_STACK_ACCESS_API + select MAY_HAVE_SPARSE_IRQ + select IRQ_FORCED_THREADING + select RTC_LIB + select GENERIC_ATOMIC64 + select GENERIC_IRQ_SHOW + select GENERIC_SMP_IDLE_THREAD + select GENERIC_IDLE_POLL_SETUP + select GENERIC_CLOCKEVENTS + select GENERIC_CMOS_UPDATE if SH_SH03 || SH_DREAMCAST + select GENERIC_STRNCPY_FROM_USER + select GENERIC_STRNLEN_USER + select HAVE_MOD_ARCH_SPECIFIC if DWARF_UNWINDER + select MODULES_USE_ELF_RELA + select OLD_SIGSUSPEND + select OLD_SIGACTION + select HAVE_ARCH_AUDITSYSCALL + help + The SuperH is a RISC processor targeted for use in embedded systems + and consumer electronics; it was also used in the Sega Dreamcast + gaming console. The SuperH port has a home page at + <http://www.linux-sh.org/>. + +config SUPERH32 + def_bool ARCH = "sh" + select HAVE_KPROBES + select HAVE_KRETPROBES + select HAVE_IOREMAP_PROT if MMU && !X2TLB + select HAVE_FUNCTION_TRACER + select HAVE_FTRACE_MCOUNT_RECORD + select HAVE_DYNAMIC_FTRACE + select HAVE_FTRACE_NMI_ENTER if DYNAMIC_FTRACE + select ARCH_WANT_IPC_PARSE_VERSION + select HAVE_FUNCTION_GRAPH_TRACER + select HAVE_ARCH_KGDB + select HAVE_HW_BREAKPOINT + select HAVE_MIXED_BREAKPOINTS_REGS + select PERF_EVENTS + select ARCH_HIBERNATION_POSSIBLE if MMU + select SPARSE_IRQ + select HAVE_CC_STACKPROTECTOR + +config SUPERH64 + def_bool ARCH = "sh64" + select KALLSYMS + +config ARCH_DEFCONFIG + string + default "arch/sh/configs/shx3_defconfig" if SUPERH32 + default "arch/sh/configs/cayman_defconfig" if SUPERH64 + +config RWSEM_GENERIC_SPINLOCK + def_bool y + +config RWSEM_XCHGADD_ALGORITHM + bool + +config GENERIC_BUG + def_bool y + depends on BUG && SUPERH32 + +config GENERIC_CSUM + def_bool y + depends on SUPERH64 + +config GENERIC_HWEIGHT + def_bool y + +config GENERIC_CALIBRATE_DELAY + bool + +config GENERIC_LOCKBREAK + def_bool y + depends on SMP && PREEMPT + +config ARCH_SUSPEND_POSSIBLE + def_bool n + +config ARCH_HIBERNATION_POSSIBLE + def_bool n + +config SYS_SUPPORTS_APM_EMULATION + bool + select ARCH_SUSPEND_POSSIBLE + +config SYS_SUPPORTS_HUGETLBFS + bool + +config SYS_SUPPORTS_SMP + bool + +config SYS_SUPPORTS_NUMA + bool + +config SYS_SUPPORTS_PCI + bool + +config STACKTRACE_SUPPORT + def_bool y + +config LOCKDEP_SUPPORT + def_bool y + +config HAVE_LATENCYTOP_SUPPORT + def_bool y + +config ARCH_HAS_ILOG2_U32 + def_bool n + +config ARCH_HAS_ILOG2_U64 + def_bool n + +config NO_IOPORT_MAP + def_bool !PCI + depends on !SH_CAYMAN && !SH_SH4202_MICRODEV && !SH_SHMIN && \ + !SH_HP6XX && !SH_SOLUTION_ENGINE + +config IO_TRAPPED + bool + +config SWAP_IO_SPACE + bool + +config DMA_COHERENT + bool + +config DMA_NONCOHERENT + def_bool !DMA_COHERENT + +config NEED_DMA_MAP_STATE + def_bool DMA_NONCOHERENT + +config NEED_SG_DMA_LENGTH + def_bool y + +config PGTABLE_LEVELS + default 3 if X2TLB + default 2 + +source "init/Kconfig" + +source "kernel/Kconfig.freezer" + +menu "System type" + +# +# Processor families +# +config CPU_SH2 + bool + select SH_INTC + +config CPU_SH2A + bool + select CPU_SH2 + select UNCACHED_MAPPING + +config CPU_SH3 + bool + select CPU_HAS_INTEVT + select CPU_HAS_SR_RB + select SH_INTC + select SYS_SUPPORTS_SH_TMU + +config CPU_SH4 + bool + select CPU_HAS_INTEVT + select CPU_HAS_SR_RB + select CPU_HAS_FPU if !CPU_SH4AL_DSP + select SH_INTC + select SYS_SUPPORTS_SH_TMU + select SYS_SUPPORTS_HUGETLBFS if MMU + +config CPU_SH4A + bool + select CPU_SH4 + +config CPU_SH4AL_DSP + bool + select CPU_SH4A + select CPU_HAS_DSP + +config CPU_SH5 + bool + select CPU_HAS_FPU + select SYS_SUPPORTS_SH_TMU + select SYS_SUPPORTS_HUGETLBFS if MMU + +config CPU_SHX2 + bool + +config CPU_SHX3 + bool + select DMA_COHERENT + select SYS_SUPPORTS_SMP + select SYS_SUPPORTS_NUMA + +config ARCH_SHMOBILE + bool + select ARCH_SUSPEND_POSSIBLE + select PM + +config CPU_HAS_PMU + depends on CPU_SH4 || CPU_SH4A + default y + bool + +if SUPERH32 + +choice + prompt "Processor sub-type selection" + +# +# Processor subtypes +# + +# SH-2 Processor Support + +config CPU_SUBTYPE_SH7619 + bool "Support SH7619 processor" + select CPU_SH2 + select SYS_SUPPORTS_SH_CMT + +# SH-2A Processor Support + +config CPU_SUBTYPE_SH7201 + bool "Support SH7201 processor" + select CPU_SH2A + select CPU_HAS_FPU + select SYS_SUPPORTS_SH_MTU2 + +config CPU_SUBTYPE_SH7203 + bool "Support SH7203 processor" + select CPU_SH2A + select CPU_HAS_FPU + select SYS_SUPPORTS_SH_CMT + select SYS_SUPPORTS_SH_MTU2 + select ARCH_WANT_OPTIONAL_GPIOLIB + select PINCTRL + +config CPU_SUBTYPE_SH7206 + bool "Support SH7206 processor" + select CPU_SH2A + select SYS_SUPPORTS_SH_CMT + select SYS_SUPPORTS_SH_MTU2 + +config CPU_SUBTYPE_SH7263 + bool "Support SH7263 processor" + select CPU_SH2A + select CPU_HAS_FPU + select SYS_SUPPORTS_SH_CMT + select SYS_SUPPORTS_SH_MTU2 + +config CPU_SUBTYPE_SH7264 + bool "Support SH7264 processor" + select CPU_SH2A + select CPU_HAS_FPU + select SYS_SUPPORTS_SH_CMT + select SYS_SUPPORTS_SH_MTU2 + select PINCTRL + +config CPU_SUBTYPE_SH7269 + bool "Support SH7269 processor" + select CPU_SH2A + select CPU_HAS_FPU + select SYS_SUPPORTS_SH_CMT + select SYS_SUPPORTS_SH_MTU2 + select PINCTRL + +config CPU_SUBTYPE_MXG + bool "Support MX-G processor" + select CPU_SH2A + select SYS_SUPPORTS_SH_MTU2 + help + Select MX-G if running on an R8A03022BG part. + +# SH-3 Processor Support + +config CPU_SUBTYPE_SH7705 + bool "Support SH7705 processor" + select CPU_SH3 + +config CPU_SUBTYPE_SH7706 + bool "Support SH7706 processor" + select CPU_SH3 + help + Select SH7706 if you have a 133 Mhz SH-3 HD6417706 CPU. + +config CPU_SUBTYPE_SH7707 + bool "Support SH7707 processor" + select CPU_SH3 + help + Select SH7707 if you have a 60 Mhz SH-3 HD6417707 CPU. + +config CPU_SUBTYPE_SH7708 + bool "Support SH7708 processor" + select CPU_SH3 + help + Select SH7708 if you have a 60 Mhz SH-3 HD6417708S or + if you have a 100 Mhz SH-3 HD6417708R CPU. + +config CPU_SUBTYPE_SH7709 + bool "Support SH7709 processor" + select CPU_SH3 + help + Select SH7709 if you have a 80 Mhz SH-3 HD6417709 CPU. + +config CPU_SUBTYPE_SH7710 + bool "Support SH7710 processor" + select CPU_SH3 + select CPU_HAS_DSP + help + Select SH7710 if you have a SH3-DSP SH7710 CPU. + +config CPU_SUBTYPE_SH7712 + bool "Support SH7712 processor" + select CPU_SH3 + select CPU_HAS_DSP + help + Select SH7712 if you have a SH3-DSP SH7712 CPU. + +config CPU_SUBTYPE_SH7720 + bool "Support SH7720 processor" + select CPU_SH3 + select CPU_HAS_DSP + select SYS_SUPPORTS_SH_CMT + select ARCH_WANT_OPTIONAL_GPIOLIB + select USB_OHCI_SH if USB_OHCI_HCD + select PINCTRL + help + Select SH7720 if you have a SH3-DSP SH7720 CPU. + +config CPU_SUBTYPE_SH7721 + bool "Support SH7721 processor" + select CPU_SH3 + select CPU_HAS_DSP + select SYS_SUPPORTS_SH_CMT + select USB_OHCI_SH if USB_OHCI_HCD + help + Select SH7721 if you have a SH3-DSP SH7721 CPU. + +# SH-4 Processor Support + +config CPU_SUBTYPE_SH7750 + bool "Support SH7750 processor" + select CPU_SH4 + help + Select SH7750 if you have a 200 Mhz SH-4 HD6417750 CPU. + +config CPU_SUBTYPE_SH7091 + bool "Support SH7091 processor" + select CPU_SH4 + help + Select SH7091 if you have an SH-4 based Sega device (such as + the Dreamcast, Naomi, and Naomi 2). + +config CPU_SUBTYPE_SH7750R + bool "Support SH7750R processor" + select CPU_SH4 + +config CPU_SUBTYPE_SH7750S + bool "Support SH7750S processor" + select CPU_SH4 + +config CPU_SUBTYPE_SH7751 + bool "Support SH7751 processor" + select CPU_SH4 + help + Select SH7751 if you have a 166 Mhz SH-4 HD6417751 CPU, + or if you have a HD6417751R CPU. + +config CPU_SUBTYPE_SH7751R + bool "Support SH7751R processor" + select CPU_SH4 + +config CPU_SUBTYPE_SH7760 + bool "Support SH7760 processor" + select CPU_SH4 + +config CPU_SUBTYPE_SH4_202 + bool "Support SH4-202 processor" + select CPU_SH4 + +# SH-4A Processor Support + +config CPU_SUBTYPE_SH7723 + bool "Support SH7723 processor" + select CPU_SH4A + select CPU_SHX2 + select ARCH_SHMOBILE + select ARCH_SPARSEMEM_ENABLE + select SYS_SUPPORTS_SH_CMT + select ARCH_WANT_OPTIONAL_GPIOLIB + select PINCTRL + help + Select SH7723 if you have an SH-MobileR2 CPU. + +config CPU_SUBTYPE_SH7724 + bool "Support SH7724 processor" + select CPU_SH4A + select CPU_SHX2 + select ARCH_SHMOBILE + select ARCH_SPARSEMEM_ENABLE + select SYS_SUPPORTS_SH_CMT + select ARCH_WANT_OPTIONAL_GPIOLIB + select PINCTRL + help + Select SH7724 if you have an SH-MobileR2R CPU. + +config CPU_SUBTYPE_SH7734 + bool "Support SH7734 processor" + select CPU_SH4A + select CPU_SHX2 + select ARCH_WANT_OPTIONAL_GPIOLIB + select PINCTRL + help + Select SH7734 if you have a SH4A SH7734 CPU. + +config CPU_SUBTYPE_SH7757 + bool "Support SH7757 processor" + select CPU_SH4A + select CPU_SHX2 + select ARCH_WANT_OPTIONAL_GPIOLIB + select PINCTRL + help + Select SH7757 if you have a SH4A SH7757 CPU. + +config CPU_SUBTYPE_SH7763 + bool "Support SH7763 processor" + select CPU_SH4A + select USB_OHCI_SH if USB_OHCI_HCD + help + Select SH7763 if you have a SH4A SH7763(R5S77631) CPU. + +config CPU_SUBTYPE_SH7770 + bool "Support SH7770 processor" + select CPU_SH4A + +config CPU_SUBTYPE_SH7780 + bool "Support SH7780 processor" + select CPU_SH4A + +config CPU_SUBTYPE_SH7785 + bool "Support SH7785 processor" + select CPU_SH4A + select CPU_SHX2 + select ARCH_SPARSEMEM_ENABLE + select SYS_SUPPORTS_NUMA + select ARCH_WANT_OPTIONAL_GPIOLIB + select PINCTRL + +config CPU_SUBTYPE_SH7786 + bool "Support SH7786 processor" + select CPU_SH4A + select CPU_SHX3 + select CPU_HAS_PTEAEX + select GENERIC_CLOCKEVENTS_BROADCAST if SMP + select ARCH_WANT_OPTIONAL_GPIOLIB + select USB_OHCI_SH if USB_OHCI_HCD + select USB_EHCI_SH if USB_EHCI_HCD + select PINCTRL + +config CPU_SUBTYPE_SHX3 + bool "Support SH-X3 processor" + select CPU_SH4A + select CPU_SHX3 + select GENERIC_CLOCKEVENTS_BROADCAST if SMP + select ARCH_REQUIRE_GPIOLIB + select PINCTRL + +# SH4AL-DSP Processor Support + +config CPU_SUBTYPE_SH7343 + bool "Support SH7343 processor" + select CPU_SH4AL_DSP + select ARCH_SHMOBILE + select SYS_SUPPORTS_SH_CMT + +config CPU_SUBTYPE_SH7722 + bool "Support SH7722 processor" + select CPU_SH4AL_DSP + select CPU_SHX2 + select ARCH_SHMOBILE + select ARCH_SPARSEMEM_ENABLE + select SYS_SUPPORTS_NUMA + select SYS_SUPPORTS_SH_CMT + select ARCH_WANT_OPTIONAL_GPIOLIB + select PINCTRL + +config CPU_SUBTYPE_SH7366 + bool "Support SH7366 processor" + select CPU_SH4AL_DSP + select CPU_SHX2 + select ARCH_SHMOBILE + select ARCH_SPARSEMEM_ENABLE + select SYS_SUPPORTS_NUMA + select SYS_SUPPORTS_SH_CMT + +endchoice + +endif + +if SUPERH64 + +choice + prompt "Processor sub-type selection" + +# SH-5 Processor Support + +config CPU_SUBTYPE_SH5_101 + bool "Support SH5-101 processor" + select CPU_SH5 + +config CPU_SUBTYPE_SH5_103 + bool "Support SH5-103 processor" + select CPU_SH5 + +endchoice + +endif + +source "arch/sh/mm/Kconfig" + +source "arch/sh/Kconfig.cpu" + +source "arch/sh/boards/Kconfig" + +menu "Timer and clock configuration" + +config SH_PCLK_FREQ + int "Peripheral clock frequency (in Hz)" + depends on SH_CLK_CPG_LEGACY + default "31250000" if CPU_SUBTYPE_SH7619 + default "33333333" if CPU_SUBTYPE_SH7770 || \ + CPU_SUBTYPE_SH7760 || \ + CPU_SUBTYPE_SH7705 || \ + CPU_SUBTYPE_SH7203 || \ + CPU_SUBTYPE_SH7206 || \ + CPU_SUBTYPE_SH7263 || \ + CPU_SUBTYPE_MXG + default "60000000" if CPU_SUBTYPE_SH7751 || CPU_SUBTYPE_SH7751R + default "66000000" if CPU_SUBTYPE_SH4_202 + default "50000000" + help + This option is used to specify the peripheral clock frequency. + This is necessary for determining the reference clock value on + platforms lacking an RTC. + +config SH_CLK_CPG + def_bool y + +config SH_CLK_CPG_LEGACY + depends on SH_CLK_CPG + def_bool y if !CPU_SUBTYPE_SH7785 && !ARCH_SHMOBILE && \ + !CPU_SHX3 && !CPU_SUBTYPE_SH7757 && \ + !CPU_SUBTYPE_SH7734 && !CPU_SUBTYPE_SH7264 && \ + !CPU_SUBTYPE_SH7269 + +endmenu + +menu "CPU Frequency scaling" +source "drivers/cpufreq/Kconfig" +endmenu + +source "arch/sh/drivers/Kconfig" + +endmenu + +menu "Kernel features" + +source kernel/Kconfig.hz + +config KEXEC + bool "kexec system call (EXPERIMENTAL)" + depends on SUPERH32 && MMU + help + kexec is a system call that implements the ability to shutdown your + current kernel, and to start another kernel. It is like a reboot + but it is independent of the system firmware. And like a reboot + you can start any kernel with it, not just Linux. + + The name comes from the similarity to the exec system call. + + It is an ongoing process to be certain the hardware in a machine + is properly shutdown, so do not be surprised if this code does not + initially work for you. As of this writing the exact hardware + interface is strongly in flux, so no good recommendation can be + made. + +config CRASH_DUMP + bool "kernel crash dumps (EXPERIMENTAL)" + depends on SUPERH32 && BROKEN_ON_SMP + help + Generate crash dump after being started by kexec. + This should be normally only set in special crash dump kernels + which are loaded in the main kernel with kexec-tools into + a specially reserved region and then later executed after + a crash by kdump/kexec. The crash dump kernel must be compiled + to a memory address not used by the main kernel using + PHYSICAL_START. + + For more details see Documentation/kdump/kdump.txt + +config KEXEC_JUMP + bool "kexec jump (EXPERIMENTAL)" + depends on SUPERH32 && KEXEC && HIBERNATION + help + Jump between original kernel and kexeced kernel and invoke + code via KEXEC + +config PHYSICAL_START + hex "Physical address where the kernel is loaded" if (EXPERT || CRASH_DUMP) + default MEMORY_START + ---help--- + This gives the physical address where the kernel is loaded + and is ordinarily the same as MEMORY_START. + + Different values are primarily used in the case of kexec on panic + where the fail safe kernel needs to run at a different address + than the panic-ed kernel. + +config SECCOMP + bool "Enable seccomp to safely compute untrusted bytecode" + depends on PROC_FS + help + This kernel feature is useful for number crunching applications + that may need to compute untrusted bytecode during their + execution. By using pipes or other transports made available to + the process as file descriptors supporting the read/write + syscalls, it's possible to isolate those applications in + their own address space using seccomp. Once seccomp is + enabled via prctl, it cannot be disabled and the task is only + allowed to execute a few safe syscalls defined by each seccomp + mode. + + If unsure, say N. + +config SMP + bool "Symmetric multi-processing support" + depends on SYS_SUPPORTS_SMP + ---help--- + This enables support for systems with more than one CPU. If you have + a system with only one CPU, say N. If you have a system with more + than one CPU, say Y. + + If you say N here, the kernel will run on uni- and multiprocessor + machines, but will use only one CPU of a multiprocessor machine. If + you say Y here, the kernel will run on many, but not all, + uniprocessor machines. On a uniprocessor machine, the kernel + will run faster if you say N here. + + People using multiprocessor machines who say Y here should also say + Y to "Enhanced Real Time Clock Support", below. + + See also <file:Documentation/nmi_watchdog.txt> and the SMP-HOWTO + available at <http://www.tldp.org/docs.html#howto>. + + If you don't know what to do here, say N. + +config NR_CPUS + int "Maximum number of CPUs (2-32)" + range 2 32 + depends on SMP + default "4" if CPU_SUBTYPE_SHX3 + default "2" + help + This allows you to specify the maximum number of CPUs which this + kernel will support. The maximum supported value is 32 and the + minimum value which makes sense is 2. + + This is purely to save memory - each supported CPU adds + approximately eight kilobytes to the kernel image. + +config HOTPLUG_CPU + bool "Support for hot-pluggable CPUs (EXPERIMENTAL)" + depends on SMP + help + Say Y here to experiment with turning CPUs off and on. CPUs + can be controlled through /sys/devices/system/cpu. + +source "kernel/Kconfig.preempt" + +config GUSA + def_bool y + depends on !SMP && SUPERH32 + help + This enables support for gUSA (general UserSpace Atomicity). + This is the default implementation for both UP and non-ll/sc + CPUs, and is used by the libc, amongst others. + + For additional information, design information can be found + in <http://lc.linux.or.jp/lc2002/papers/niibe0919p.pdf>. + + This should only be disabled for special cases where alternate + atomicity implementations exist. + +config GUSA_RB + bool "Implement atomic operations by roll-back (gRB) (EXPERIMENTAL)" + depends on GUSA && CPU_SH3 || (CPU_SH4 && !CPU_SH4A) + help + Enabling this option will allow the kernel to implement some + atomic operations using a software implementation of load-locked/ + store-conditional (LLSC). On machines which do not have hardware + LLSC, this should be more efficient than the other alternative of + disabling interrupts around the atomic sequence. + +config HW_PERF_EVENTS + bool "Enable hardware performance counter support for perf events" + depends on PERF_EVENTS && CPU_HAS_PMU + default y + help + Enable hardware performance counter support for perf events. If + disabled, perf events will use software events only. + +source "drivers/sh/Kconfig" + +endmenu + +menu "Boot options" + +config ZERO_PAGE_OFFSET + hex + default "0x00010000" if PAGE_SIZE_64KB || SH_RTS7751R2D || \ + SH_7751_SOLUTION_ENGINE + default "0x00004000" if PAGE_SIZE_16KB || SH_SH03 + default "0x00002000" if PAGE_SIZE_8KB + default "0x00001000" + help + This sets the default offset of zero page. + +config BOOT_LINK_OFFSET + hex + default "0x00210000" if SH_SHMIN + default "0x00400000" if SH_CAYMAN + default "0x00810000" if SH_7780_SOLUTION_ENGINE + default "0x009e0000" if SH_TITAN + default "0x01800000" if SH_SDK7780 + default "0x02000000" if SH_EDOSK7760 + default "0x00800000" + help + This option allows you to set the link address offset of the zImage. + This can be useful if you are on a board which has a small amount of + memory. + +config ENTRY_OFFSET + hex + default "0x00001000" if PAGE_SIZE_4KB + default "0x00002000" if PAGE_SIZE_8KB + default "0x00004000" if PAGE_SIZE_16KB + default "0x00010000" if PAGE_SIZE_64KB + default "0x00000000" + +config ROMIMAGE_MMCIF + bool "Include MMCIF loader in romImage (EXPERIMENTAL)" + depends on CPU_SUBTYPE_SH7724 + help + Say Y here to include experimental MMCIF loading code in + romImage. With this enabled it is possible to write the romImage + kernel image to an MMC card and boot the kernel straight from + the reset vector. At reset the processor Mask ROM will load the + first part of the romImage which in turn loads the rest the kernel + image to RAM using the MMCIF hardware block. + +choice + prompt "Kernel command line" + optional + default CMDLINE_OVERWRITE + help + Setting this option allows the kernel command line arguments + to be set. + +config CMDLINE_OVERWRITE + bool "Overwrite bootloader kernel arguments" + help + Given string will overwrite any arguments passed in by + a bootloader. + +config CMDLINE_EXTEND + bool "Extend bootloader kernel arguments" + help + Given string will be concatenated with arguments passed in + by a bootloader. + +endchoice + +config CMDLINE + string "Kernel command line arguments string" + depends on CMDLINE_OVERWRITE || CMDLINE_EXTEND + default "console=ttySC1,115200" + +endmenu + +menu "Bus options" + +config SUPERHYWAY + tristate "SuperHyway Bus support" + depends on CPU_SUBTYPE_SH4_202 + +config MAPLE + bool "Maple Bus support" + depends on SH_DREAMCAST + help + The Maple Bus is SEGA's serial communication bus for peripherals + on the Dreamcast. Without this bus support you won't be able to + get your Dreamcast keyboard etc to work, so most users + probably want to say 'Y' here, unless you are only using the + Dreamcast with a serial line terminal or a remote network + connection. + +config PCI + bool "PCI support" + depends on SYS_SUPPORTS_PCI + select PCI_DOMAINS + select GENERIC_PCI_IOMAP + select NO_GENERIC_PCI_IOPORT_MAP + help + Find out whether you have a PCI motherboard. PCI is the name of a + bus system, i.e. the way the CPU talks to the other stuff inside + your box. If you have PCI, say Y, otherwise N. + +config PCI_DOMAINS + bool + +source "drivers/pci/pcie/Kconfig" + +source "drivers/pci/Kconfig" + +source "drivers/pcmcia/Kconfig" + +source "drivers/pci/hotplug/Kconfig" + +endmenu + +menu "Executable file formats" + +source "fs/Kconfig.binfmt" + +endmenu + +menu "Power management options (EXPERIMENTAL)" + +source "kernel/power/Kconfig" + +source "drivers/cpuidle/Kconfig" + +endmenu + +source "net/Kconfig" + +source "drivers/Kconfig" + +source "fs/Kconfig" + +source "arch/sh/Kconfig.debug" + +source "security/Kconfig" + +source "crypto/Kconfig" + +source "lib/Kconfig" |