diff options
Diffstat (limited to 'arch/sh/boards/mach-sdk7786')
| -rw-r--r-- | arch/sh/boards/mach-sdk7786/Makefile | 4 | ||||
| -rw-r--r-- | arch/sh/boards/mach-sdk7786/fpga.c | 72 | ||||
| -rw-r--r-- | arch/sh/boards/mach-sdk7786/gpio.c | 49 | ||||
| -rw-r--r-- | arch/sh/boards/mach-sdk7786/irq.c | 48 | ||||
| -rw-r--r-- | arch/sh/boards/mach-sdk7786/nmi.c | 83 | ||||
| -rw-r--r-- | arch/sh/boards/mach-sdk7786/setup.c | 269 | ||||
| -rw-r--r-- | arch/sh/boards/mach-sdk7786/sram.c | 72 |
7 files changed, 597 insertions, 0 deletions
diff --git a/arch/sh/boards/mach-sdk7786/Makefile b/arch/sh/boards/mach-sdk7786/Makefile new file mode 100644 index 000000000..45d32e359 --- /dev/null +++ b/arch/sh/boards/mach-sdk7786/Makefile @@ -0,0 +1,4 @@ +obj-y := fpga.o irq.o nmi.o setup.o + +obj-$(CONFIG_GPIOLIB) += gpio.o +obj-$(CONFIG_HAVE_SRAM_POOL) += sram.o diff --git a/arch/sh/boards/mach-sdk7786/fpga.c b/arch/sh/boards/mach-sdk7786/fpga.c new file mode 100644 index 000000000..3e4ec66a0 --- /dev/null +++ b/arch/sh/boards/mach-sdk7786/fpga.c @@ -0,0 +1,72 @@ +/* + * SDK7786 FPGA Support. + * + * Copyright (C) 2010 Paul Mundt + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ +#include <linux/init.h> +#include <linux/io.h> +#include <linux/bcd.h> +#include <mach/fpga.h> +#include <asm/sizes.h> + +#define FPGA_REGS_OFFSET 0x03fff800 +#define FPGA_REGS_SIZE 0x490 + +/* + * The FPGA can be mapped in any of the generally available areas, + * so we attempt to scan for it using the fixed SRSTR read magic. + * + * Once the FPGA is located, the rest of the mapping data for the other + * components can be determined dynamically from its section mapping + * registers. + */ +static void __iomem *sdk7786_fpga_probe(void) +{ + unsigned long area; + void __iomem *base; + + /* + * Iterate over all of the areas where the FPGA could be mapped. + * The possible range is anywhere from area 0 through 6, area 7 + * is reserved. + */ + for (area = PA_AREA0; area < PA_AREA7; area += SZ_64M) { + base = ioremap_nocache(area + FPGA_REGS_OFFSET, FPGA_REGS_SIZE); + if (!base) { + /* Failed to remap this area, move along. */ + continue; + } + + if (ioread16(base + SRSTR) == SRSTR_MAGIC) + return base; /* Found it! */ + + iounmap(base); + } + + return NULL; +} + +void __iomem *sdk7786_fpga_base; + +void __init sdk7786_fpga_init(void) +{ + u16 version, date; + + sdk7786_fpga_base = sdk7786_fpga_probe(); + if (unlikely(!sdk7786_fpga_base)) { + panic("FPGA detection failed.\n"); + return; + } + + version = fpga_read_reg(FPGAVR); + date = fpga_read_reg(FPGADR); + + pr_info("\tFPGA version:\t%d.%d (built on %d/%d/%d)\n", + bcd2bin(version >> 8) & 0xf, bcd2bin(version & 0xf), + ((date >> 12) & 0xf) + 2000, + (date >> 8) & 0xf, bcd2bin(date & 0xff)); +} diff --git a/arch/sh/boards/mach-sdk7786/gpio.c b/arch/sh/boards/mach-sdk7786/gpio.c new file mode 100644 index 000000000..f71ce09d4 --- /dev/null +++ b/arch/sh/boards/mach-sdk7786/gpio.c @@ -0,0 +1,49 @@ +/* + * SDK7786 FPGA USRGPIR Support. + * + * Copyright (C) 2010 Paul Mundt + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ +#include <linux/init.h> +#include <linux/interrupt.h> +#include <linux/gpio.h> +#include <linux/irq.h> +#include <linux/kernel.h> +#include <linux/spinlock.h> +#include <linux/io.h> +#include <mach/fpga.h> + +#define NR_FPGA_GPIOS 8 + +static const char *usrgpir_gpio_names[NR_FPGA_GPIOS] = { + "in0", "in1", "in2", "in3", "in4", "in5", "in6", "in7", +}; + +static int usrgpir_gpio_direction_input(struct gpio_chip *chip, unsigned gpio) +{ + /* always in */ + return 0; +} + +static int usrgpir_gpio_get(struct gpio_chip *chip, unsigned gpio) +{ + return !!(fpga_read_reg(USRGPIR) & (1 << gpio)); +} + +static struct gpio_chip usrgpir_gpio_chip = { + .label = "sdk7786-fpga", + .names = usrgpir_gpio_names, + .direction_input = usrgpir_gpio_direction_input, + .get = usrgpir_gpio_get, + .base = -1, /* don't care */ + .ngpio = NR_FPGA_GPIOS, +}; + +static int __init usrgpir_gpio_setup(void) +{ + return gpiochip_add(&usrgpir_gpio_chip); +} +device_initcall(usrgpir_gpio_setup); diff --git a/arch/sh/boards/mach-sdk7786/irq.c b/arch/sh/boards/mach-sdk7786/irq.c new file mode 100644 index 000000000..46943a0da --- /dev/null +++ b/arch/sh/boards/mach-sdk7786/irq.c @@ -0,0 +1,48 @@ +/* + * SDK7786 FPGA IRQ Controller Support. + * + * Copyright (C) 2010 Matt Fleming + * Copyright (C) 2010 Paul Mundt + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ +#include <linux/irq.h> +#include <mach/fpga.h> +#include <mach/irq.h> + +enum { + ATA_IRQ_BIT = 1, + SPI_BUSY_BIT = 2, + LIRQ5_BIT = 3, + LIRQ6_BIT = 4, + LIRQ7_BIT = 5, + LIRQ8_BIT = 6, + KEY_IRQ_BIT = 7, + PEN_IRQ_BIT = 8, + ETH_IRQ_BIT = 9, + RTC_ALARM_BIT = 10, + CRYSTAL_FAIL_BIT = 12, + ETH_PME_BIT = 14, +}; + +void __init sdk7786_init_irq(void) +{ + unsigned int tmp; + + /* Enable priority encoding for all IRLs */ + fpga_write_reg(fpga_read_reg(INTMSR) | 0x0303, INTMSR); + + /* Clear FPGA interrupt status registers */ + fpga_write_reg(0x0000, INTASR); + fpga_write_reg(0x0000, INTBSR); + + /* Unmask FPGA interrupts */ + tmp = fpga_read_reg(INTAMR); + tmp &= ~(1 << ETH_IRQ_BIT); + fpga_write_reg(tmp, INTAMR); + + plat_irq_setup_pins(IRQ_MODE_IRL7654_MASK); + plat_irq_setup_pins(IRQ_MODE_IRL3210_MASK); +} diff --git a/arch/sh/boards/mach-sdk7786/nmi.c b/arch/sh/boards/mach-sdk7786/nmi.c new file mode 100644 index 000000000..edcfa1f56 --- /dev/null +++ b/arch/sh/boards/mach-sdk7786/nmi.c @@ -0,0 +1,83 @@ +/* + * SDK7786 FPGA NMI Support. + * + * Copyright (C) 2010 Paul Mundt + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ +#include <linux/init.h> +#include <linux/kernel.h> +#include <linux/string.h> +#include <mach/fpga.h> + +enum { + NMI_MODE_MANUAL, + NMI_MODE_AUX, + NMI_MODE_MASKED, + NMI_MODE_ANY, + NMI_MODE_UNKNOWN, +}; + +/* + * Default to the manual NMI switch. + */ +static unsigned int __initdata nmi_mode = NMI_MODE_ANY; + +static int __init nmi_mode_setup(char *str) +{ + if (!str) + return 0; + + if (strcmp(str, "manual") == 0) + nmi_mode = NMI_MODE_MANUAL; + else if (strcmp(str, "aux") == 0) + nmi_mode = NMI_MODE_AUX; + else if (strcmp(str, "masked") == 0) + nmi_mode = NMI_MODE_MASKED; + else if (strcmp(str, "any") == 0) + nmi_mode = NMI_MODE_ANY; + else { + nmi_mode = NMI_MODE_UNKNOWN; + pr_warning("Unknown NMI mode %s\n", str); + } + + printk("Set NMI mode to %d\n", nmi_mode); + return 0; +} +early_param("nmi_mode", nmi_mode_setup); + +void __init sdk7786_nmi_init(void) +{ + unsigned int source, mask, tmp; + + switch (nmi_mode) { + case NMI_MODE_MANUAL: + source = NMISR_MAN_NMI; + mask = NMIMR_MAN_NMIM; + break; + case NMI_MODE_AUX: + source = NMISR_AUX_NMI; + mask = NMIMR_AUX_NMIM; + break; + case NMI_MODE_ANY: + source = NMISR_MAN_NMI | NMISR_AUX_NMI; + mask = NMIMR_MAN_NMIM | NMIMR_AUX_NMIM; + break; + case NMI_MODE_MASKED: + case NMI_MODE_UNKNOWN: + default: + source = mask = 0; + break; + } + + /* Set the NMI source */ + tmp = fpga_read_reg(NMISR); + tmp &= ~NMISR_MASK; + tmp |= source; + fpga_write_reg(tmp, NMISR); + + /* And the IRQ masking */ + fpga_write_reg(NMIMR_MASK ^ mask, NMIMR); +} diff --git a/arch/sh/boards/mach-sdk7786/setup.c b/arch/sh/boards/mach-sdk7786/setup.c new file mode 100644 index 000000000..c29268bfd --- /dev/null +++ b/arch/sh/boards/mach-sdk7786/setup.c @@ -0,0 +1,269 @@ +/* + * Renesas Technology Europe SDK7786 Support. + * + * Copyright (C) 2010 Matt Fleming + * Copyright (C) 2010 Paul Mundt + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ +#include <linux/init.h> +#include <linux/platform_device.h> +#include <linux/io.h> +#include <linux/regulator/fixed.h> +#include <linux/regulator/machine.h> +#include <linux/smsc911x.h> +#include <linux/i2c.h> +#include <linux/irq.h> +#include <linux/clk.h> +#include <linux/clkdev.h> +#include <mach/fpga.h> +#include <mach/irq.h> +#include <asm/machvec.h> +#include <asm/heartbeat.h> +#include <asm/sizes.h> +#include <asm/clock.h> +#include <asm/reboot.h> +#include <asm/smp-ops.h> + +static struct resource heartbeat_resource = { + .start = 0x07fff8b0, + .end = 0x07fff8b0 + sizeof(u16) - 1, + .flags = IORESOURCE_MEM | IORESOURCE_MEM_16BIT, +}; + +static struct platform_device heartbeat_device = { + .name = "heartbeat", + .id = -1, + .num_resources = 1, + .resource = &heartbeat_resource, +}; + +/* Dummy supplies, where voltage doesn't matter */ +static struct regulator_consumer_supply dummy_supplies[] = { + REGULATOR_SUPPLY("vddvario", "smsc911x"), + REGULATOR_SUPPLY("vdd33a", "smsc911x"), +}; + +static struct resource smsc911x_resources[] = { + [0] = { + .name = "smsc911x-memory", + .start = 0x07ffff00, + .end = 0x07ffff00 + SZ_256 - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .name = "smsc911x-irq", + .start = evt2irq(0x2c0), + .end = evt2irq(0x2c0), + .flags = IORESOURCE_IRQ, + }, +}; + +static struct smsc911x_platform_config smsc911x_config = { + .irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_LOW, + .irq_type = SMSC911X_IRQ_TYPE_OPEN_DRAIN, + .flags = SMSC911X_USE_32BIT, + .phy_interface = PHY_INTERFACE_MODE_MII, +}; + +static struct platform_device smsc911x_device = { + .name = "smsc911x", + .id = -1, + .num_resources = ARRAY_SIZE(smsc911x_resources), + .resource = smsc911x_resources, + .dev = { + .platform_data = &smsc911x_config, + }, +}; + +static struct resource smbus_fpga_resource = { + .start = 0x07fff9e0, + .end = 0x07fff9e0 + SZ_32 - 1, + .flags = IORESOURCE_MEM, +}; + +static struct platform_device smbus_fpga_device = { + .name = "i2c-sdk7786", + .id = 0, + .num_resources = 1, + .resource = &smbus_fpga_resource, +}; + +static struct resource smbus_pcie_resource = { + .start = 0x07fffc30, + .end = 0x07fffc30 + SZ_32 - 1, + .flags = IORESOURCE_MEM, +}; + +static struct platform_device smbus_pcie_device = { + .name = "i2c-sdk7786", + .id = 1, + .num_resources = 1, + .resource = &smbus_pcie_resource, +}; + +static struct i2c_board_info __initdata sdk7786_i2c_devices[] = { + { + I2C_BOARD_INFO("max6900", 0x68), + }, +}; + +static struct platform_device *sh7786_devices[] __initdata = { + &heartbeat_device, + &smsc911x_device, + &smbus_fpga_device, + &smbus_pcie_device, +}; + +static int sdk7786_i2c_setup(void) +{ + unsigned int tmp; + + /* + * Hand over I2C control to the FPGA. + */ + tmp = fpga_read_reg(SBCR); + tmp &= ~SCBR_I2CCEN; + tmp |= SCBR_I2CMEN; + fpga_write_reg(tmp, SBCR); + + return i2c_register_board_info(0, sdk7786_i2c_devices, + ARRAY_SIZE(sdk7786_i2c_devices)); +} + +static int __init sdk7786_devices_setup(void) +{ + int ret; + + ret = platform_add_devices(sh7786_devices, ARRAY_SIZE(sh7786_devices)); + if (unlikely(ret != 0)) + return ret; + + return sdk7786_i2c_setup(); +} +device_initcall(sdk7786_devices_setup); + +static int sdk7786_mode_pins(void) +{ + return fpga_read_reg(MODSWR); +} + +/* + * FPGA-driven PCIe clocks + * + * Historically these include the oscillator, clock B (slots 2/3/4) and + * clock A (slot 1 and the CPU clock). Newer revs of the PCB shove + * everything under a single PCIe clocks enable bit that happens to map + * to the same bit position as the oscillator bit for earlier FPGA + * versions. + * + * Given that the legacy clocks have the side-effect of shutting the CPU + * off through the FPGA along with the PCI slots, we simply leave them in + * their initial state and don't bother registering them with the clock + * framework. + */ +static int sdk7786_pcie_clk_enable(struct clk *clk) +{ + fpga_write_reg(fpga_read_reg(PCIECR) | PCIECR_CLKEN, PCIECR); + return 0; +} + +static void sdk7786_pcie_clk_disable(struct clk *clk) +{ + fpga_write_reg(fpga_read_reg(PCIECR) & ~PCIECR_CLKEN, PCIECR); +} + +static struct sh_clk_ops sdk7786_pcie_clk_ops = { + .enable = sdk7786_pcie_clk_enable, + .disable = sdk7786_pcie_clk_disable, +}; + +static struct clk sdk7786_pcie_clk = { + .ops = &sdk7786_pcie_clk_ops, +}; + +static struct clk_lookup sdk7786_pcie_cl = { + .con_id = "pcie_plat_clk", + .clk = &sdk7786_pcie_clk, +}; + +static int sdk7786_clk_init(void) +{ + struct clk *clk; + int ret; + + /* + * Only handle the EXTAL case, anyone interfacing a crystal + * resonator will need to provide their own input clock. + */ + if (test_mode_pin(MODE_PIN9)) + return -EINVAL; + + clk = clk_get(NULL, "extal"); + if (IS_ERR(clk)) + return PTR_ERR(clk); + ret = clk_set_rate(clk, 33333333); + clk_put(clk); + + /* + * Setup the FPGA clocks. + */ + ret = clk_register(&sdk7786_pcie_clk); + if (unlikely(ret)) { + pr_err("FPGA clock registration failed\n"); + return ret; + } + + clkdev_add(&sdk7786_pcie_cl); + + return 0; +} + +static void sdk7786_restart(char *cmd) +{ + fpga_write_reg(0xa5a5, SRSTR); +} + +static void sdk7786_power_off(void) +{ + fpga_write_reg(fpga_read_reg(PWRCR) | PWRCR_PDWNREQ, PWRCR); + + /* + * It can take up to 20us for the R8C to do its job, back off and + * wait a bit until we've been shut off. Even though newer FPGA + * versions don't set the ACK bit, the latency issue remains. + */ + while ((fpga_read_reg(PWRCR) & PWRCR_PDWNACK) == 0) + cpu_sleep(); +} + +/* Initialize the board */ +static void __init sdk7786_setup(char **cmdline_p) +{ + pr_info("Renesas Technology Europe SDK7786 support:\n"); + + regulator_register_fixed(0, dummy_supplies, ARRAY_SIZE(dummy_supplies)); + + sdk7786_fpga_init(); + sdk7786_nmi_init(); + + pr_info("\tPCB revision:\t%d\n", fpga_read_reg(PCBRR) & 0xf); + + machine_ops.restart = sdk7786_restart; + pm_power_off = sdk7786_power_off; + + register_smp_ops(&shx3_smp_ops); +} + +/* + * The Machine Vector + */ +static struct sh_machine_vector mv_sdk7786 __initmv = { + .mv_name = "SDK7786", + .mv_setup = sdk7786_setup, + .mv_mode_pins = sdk7786_mode_pins, + .mv_clk_init = sdk7786_clk_init, + .mv_init_irq = sdk7786_init_irq, +}; diff --git a/arch/sh/boards/mach-sdk7786/sram.c b/arch/sh/boards/mach-sdk7786/sram.c new file mode 100644 index 000000000..c81c3abbe --- /dev/null +++ b/arch/sh/boards/mach-sdk7786/sram.c @@ -0,0 +1,72 @@ +/* + * SDK7786 FPGA SRAM Support. + * + * Copyright (C) 2010 Paul Mundt + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + +#include <linux/init.h> +#include <linux/kernel.h> +#include <linux/types.h> +#include <linux/io.h> +#include <linux/string.h> +#include <mach/fpga.h> +#include <asm/sram.h> +#include <asm/sizes.h> + +static int __init fpga_sram_init(void) +{ + unsigned long phys; + unsigned int area; + void __iomem *vaddr; + int ret; + u16 data; + + /* Enable FPGA SRAM */ + data = fpga_read_reg(LCLASR); + data |= LCLASR_FRAMEN; + fpga_write_reg(data, LCLASR); + + /* + * FPGA_SEL determines the area mapping + */ + area = (data & LCLASR_FPGA_SEL_MASK) >> LCLASR_FPGA_SEL_SHIFT; + if (unlikely(area == LCLASR_AREA_MASK)) { + pr_err("FPGA memory unmapped.\n"); + return -ENXIO; + } + + /* + * The memory itself occupies a 2KiB range at the top of the area + * immediately below the system registers. + */ + phys = (area << 26) + SZ_64M - SZ_4K; + + /* + * The FPGA SRAM resides in translatable physical space, so set + * up a mapping prior to inserting it in to the pool. + */ + vaddr = ioremap(phys, SZ_2K); + if (unlikely(!vaddr)) { + pr_err("Failed remapping FPGA memory.\n"); + return -ENXIO; + } + + pr_info("Adding %dKiB of FPGA memory at 0x%08lx-0x%08lx " + "(area %d) to pool.\n", + SZ_2K >> 10, phys, phys + SZ_2K - 1, area); + + ret = gen_pool_add(sram_pool, (unsigned long)vaddr, SZ_2K, -1); + if (unlikely(ret < 0)) { + pr_err("Failed adding memory\n"); + iounmap(vaddr); + return ret; + } + + return 0; +} +postcore_initcall(fpga_sram_init); |