1 files changed, 181 insertions, 0 deletions
diff --git a/arch/sh/boards/mach-se/7343/setup.c b/arch/sh/boards/mach-se/7343/setup.c
new file mode 100644
index 000000000..8ce4f2a20
--- /dev/null
+++ b/arch/sh/boards/mach-se/7343/setup.c
@@ -0,0 +1,181 @@
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/mtd/physmap.h>
+#include <linux/serial_8250.h>
+#include <linux/serial_reg.h>
+#include <linux/usb/isp116x.h>
+#include <linux/delay.h>
+#include <linux/irqdomain.h>
+#include <asm/machvec.h>
+#include <mach-se/mach/se7343.h>
+#include <asm/heartbeat.h>
+#include <asm/irq.h>
+#include <asm/io.h>
+
+static struct resource heartbeat_resource = {
+	.start	= PA_LED,
+	.end	= PA_LED,
+	.flags	= IORESOURCE_MEM | IORESOURCE_MEM_16BIT,
+};
+
+static struct platform_device heartbeat_device = {
+	.name		= "heartbeat",
+	.id		= -1,
+	.num_resources	= 1,
+	.resource	= &heartbeat_resource,
+};
+
+static struct mtd_partition nor_flash_partitions[] = {
+	{
+		.name		= "loader",
+		.offset		= 0x00000000,
+		.size		= 128 * 1024,
+	},
+	{
+		.name		= "rootfs",
+		.offset		= MTDPART_OFS_APPEND,
+		.size		= 31 * 1024 * 1024,
+	},
+	{
+		.name		= "data",
+		.offset		= MTDPART_OFS_APPEND,
+		.size		= MTDPART_SIZ_FULL,
+	},
+};
+
+static struct physmap_flash_data nor_flash_data = {
+	.width		= 2,
+	.parts		= nor_flash_partitions,
+	.nr_parts	= ARRAY_SIZE(nor_flash_partitions),
+};
+
+static struct resource nor_flash_resources[] = {
+	[0]	= {
+		.start	= 0x00000000,
+		.end	= 0x01ffffff,
+		.flags	= IORESOURCE_MEM,
+	}
+};
+
+static struct platform_device nor_flash_device = {
+	.name		= "physmap-flash",
+	.dev		= {
+		.platform_data	= &nor_flash_data,
+	},
+	.num_resources	= ARRAY_SIZE(nor_flash_resources),
+	.resource	= nor_flash_resources,
+};
+
+#define ST16C2550C_FLAGS (UPF_BOOT_AUTOCONF | UPF_IOREMAP)
+
+static struct plat_serial8250_port serial_platform_data[] = {
+	[0] = {
+		.iotype		= UPIO_MEM,
+		.mapbase	= 0x16000000,
+		.regshift	= 1,
+		.flags		= ST16C2550C_FLAGS,
+		.uartclk	= 7372800,
+	},
+	[1] = {
+		.iotype		= UPIO_MEM,
+		.mapbase	= 0x17000000,
+		.regshift	= 1,
+		.flags		= ST16C2550C_FLAGS,
+		.uartclk	= 7372800,
+	},
+	{ },
+};
+
+static struct platform_device uart_device = {
+	.name			= "serial8250",
+	.id			= PLAT8250_DEV_PLATFORM,
+	.dev			= {
+		.platform_data	= serial_platform_data,
+	},
+};
+
+static void isp116x_delay(struct device *dev, int delay)
+{
+	ndelay(delay);
+}
+
+static struct resource usb_resources[] = {
+	[0] = {
+		.start  = 0x11800000,
+		.end    = 0x11800001,
+		.flags  = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start  = 0x11800002,
+		.end    = 0x11800003,
+		.flags  = IORESOURCE_MEM,
+	},
+	[2] = {
+		/* Filled in later */
+		.flags  = IORESOURCE_IRQ,
+	},
+};
+
+static struct isp116x_platform_data usb_platform_data = {
+	.sel15Kres		= 1,
+	.oc_enable		= 1,
+	.int_act_high		= 0,
+	.int_edge_triggered	= 0,
+	.remote_wakeup_enable	= 0,
+	.delay			= isp116x_delay,
+};
+
+static struct platform_device usb_device = {
+	.name			= "isp116x-hcd",
+	.id			= -1,
+	.num_resources		= ARRAY_SIZE(usb_resources),
+	.resource		= usb_resources,
+	.dev			= {
+		.platform_data	= &usb_platform_data,
+	},
+
+};
+
+static struct platform_device *sh7343se_platform_devices[] __initdata = {
+	&heartbeat_device,
+	&nor_flash_device,
+	&uart_device,
+	&usb_device,
+};
+
+static int __init sh7343se_devices_setup(void)
+{
+	/* Wire-up dynamic vectors */
+	serial_platform_data[0].irq = irq_find_mapping(se7343_irq_domain,
+						       SE7343_FPGA_IRQ_UARTA);
+	serial_platform_data[1].irq = irq_find_mapping(se7343_irq_domain,
+						       SE7343_FPGA_IRQ_UARTB);
+	usb_resources[2].start = usb_resources[2].end =
+		irq_find_mapping(se7343_irq_domain, SE7343_FPGA_IRQ_USB);
+
+	return platform_add_devices(sh7343se_platform_devices,
+				    ARRAY_SIZE(sh7343se_platform_devices));
+}
+device_initcall(sh7343se_devices_setup);
+
+/*
+ * Initialize the board
+ */
+static void __init sh7343se_setup(char **cmdline_p)
+{
+	__raw_writew(0xf900, FPGA_OUT);	/* FPGA */
+
+	__raw_writew(0x0002, PORT_PECR);	/* PORT E 1 = IRQ5 */
+	__raw_writew(0x0020, PORT_PSELD);
+
+	printk(KERN_INFO "MS7343CP01 Setup...done\n");
+}
+
+/*
+ * The Machine Vector
+ */
+static struct sh_machine_vector mv_7343se __initmv = {
+	.mv_name = "SolutionEngine 7343",
+	.mv_setup = sh7343se_setup,
+	.mv_init_irq = init_7343se_IRQ,
+};