1 files changed, 75 insertions, 0 deletions
diff --git a/arch/sparc/boot/Makefile b/arch/sparc/boot/Makefile
new file mode 100644
index 000000000..6a4ceae5e
--- /dev/null
+++ b/arch/sparc/boot/Makefile
@@ -0,0 +1,75 @@
+# Makefile for the Sparc boot stuff.
+#
+# Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
+# Copyright (C) 1997,1998 Jakub Jelinek (jj@ultra.linux.cz)
+
+ROOT_IMG	:= /usr/src/root.img
+ELFTOAOUT	:= elftoaout
+
+hostprogs-y	:= piggyback
+targets		:= tftpboot.img image zImage vmlinux.aout
+clean-files	:= System.map
+
+quiet_cmd_elftoaout	= ELFTOAOUT $@
+      cmd_elftoaout	= $(ELFTOAOUT) $(obj)/image -o $@
+quiet_cmd_piggy		= PIGGY   $@
+      cmd_piggy		= $(obj)/piggyback $(BITS) $@ System.map $(ROOT_IMG)
+quiet_cmd_strip		= STRIP   $@
+      cmd_strip		= $(STRIP) -R .comment -R .note -K sun4u_init -K _end -K _start $< -o $@
+
+ifeq ($(CONFIG_SPARC64),y)
+
+# Actual linking
+
+$(obj)/zImage: $(obj)/image
+	$(call if_changed,gzip)
+	@echo '  kernel: $@ is ready'
+
+$(obj)/vmlinux.aout: vmlinux FORCE
+	$(call if_changed,elftoaout)
+	@echo '  kernel: $@ is ready'
+else
+
+$(obj)/zImage: $(obj)/image
+	$(call if_changed,strip)
+	@echo '  kernel: $@ is ready'
+
+# The following lines make a readable image for U-Boot.
+#  uImage   - Binary file read by U-boot
+#  uImage.o - object file of uImage for loading with a
+#             flash programmer understanding ELF.
+
+OBJCOPYFLAGS_image.bin := -S -O binary -R .note -R .comment
+$(obj)/image.bin: $(obj)/image FORCE
+	$(call if_changed,objcopy)
+
+$(obj)/image.gz: $(obj)/image.bin
+	$(call if_changed,gzip)
+
+UIMAGE_LOADADDR = $(CONFIG_UBOOT_LOAD_ADDR)
+UIMAGE_ENTRYADDR = $(CONFIG_UBOOT_ENTRY_ADDR)
+UIMAGE_COMPRESSION = gzip
+
+quiet_cmd_uimage.o = UIMAGE.O $@
+      cmd_uimage.o = $(LD) -Tdata $(CONFIG_UBOOT_FLASH_ADDR) \
+                     -r -b binary $@ -o $@.o
+
+targets += uImage
+$(obj)/uImage: $(obj)/image.gz
+	$(call if_changed,uimage)
+	$(call if_changed,uimage.o)
+	@echo '  Image $@ is ready'
+
+endif
+
+$(obj)/image: vmlinux FORCE
+	$(call if_changed,strip)
+	@echo '  kernel: $@ is ready'
+
+$(obj)/tftpboot.img: $(obj)/image $(obj)/piggyback System.map $(ROOT_IMG) FORCE
+	$(call if_changed,elftoaout)
+	$(call if_changed,piggy)
+
+install:
+	sh $(srctree)/$(src)/install.sh $(KERNELRELEASE) $(obj)/zImage \
+		System.map "$(INSTALL_PATH)"